From 6974f1f458b083a84778641c6a4665799d6156da Mon Sep 17 00:00:00 2001 From: Dong Aisheng Date: Thu, 5 Apr 2012 17:07:23 +0800 Subject: pinctrl: fix compile error if not select PINMUX support The pinctrl_register_mappings is defined in core.c, so change the dependent macro from CONFIG_MUX to CONFIG_PINCTRL. The compile error message is: drivers/pinctrl/core.c:886: error: redefinition of 'pinctrl_register_mappings' include/linux/pinctrl/machine.h:160: note: previous definition of 'pinctrl_register_mappings' was here make[2]: *** [drivers/pinctrl/core.o] Error 1 make[1]: *** [drivers/pinctrl] Error 2 make: *** [drivers] Error 2 Acked-by: Stephen Warren Signed-off-by: Dong Aisheng Signed-off-by: Linus Walleij --- include/linux/pinctrl/machine.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/linux/pinctrl/machine.h b/include/linux/pinctrl/machine.h index fee4349364f7..d32eb8ccba84 100644 --- a/include/linux/pinctrl/machine.h +++ b/include/linux/pinctrl/machine.h @@ -148,7 +148,7 @@ struct pinctrl_map { #define PIN_MAP_CONFIGS_GROUP_HOG_DEFAULT(dev, grp, cfgs) \ PIN_MAP_CONFIGS_GROUP(dev, PINCTRL_STATE_DEFAULT, dev, grp, cfgs) -#ifdef CONFIG_PINMUX +#ifdef CONFIG_PINCTRL extern int pinctrl_register_mappings(struct pinctrl_map const *map, unsigned num_maps); -- cgit v1.2.3 From 22f099d0fcb33073a1f1f10402a16b28602e20f2 Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Fri, 16 Mar 2012 14:54:23 -0600 Subject: pinctrl: include to prevent compile errors Macros in call ARRAY_SIZE(), the definition of which eventually calls BUILD_BUG_ON_ZERO(), which is defined in . Include that so that every .c file using the pinctrl macros doesn't have to do that itself. Signed-off-by: Stephen Warren Signed-off-by: Linus Walleij --- include/linux/pinctrl/machine.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/include/linux/pinctrl/machine.h b/include/linux/pinctrl/machine.h index d32eb8ccba84..e4d1de742502 100644 --- a/include/linux/pinctrl/machine.h +++ b/include/linux/pinctrl/machine.h @@ -12,6 +12,8 @@ #ifndef __LINUX_PINCTRL_MACHINE_H #define __LINUX_PINCTRL_MACHINE_H +#include + #include "pinctrl-state.h" enum pinctrl_map_type { -- cgit v1.2.3 From d26bc49fa401be2b71838b6a4b387196cd12a534 Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Fri, 16 Mar 2012 14:54:25 -0600 Subject: pinctrl: implement pinctrl_check_ops Most code assumes that the pinctrl ops are present. Validate this when registering a pinctrl driver. Remove the one place in the code that was checking whether one of these non-optional ops was present. Signed-off-by: Stephen Warren Signed-off-by: Linus Walleij --- drivers/pinctrl/core.c | 25 +++++++++++++++++++++---- 1 file changed, 21 insertions(+), 4 deletions(-) diff --git a/drivers/pinctrl/core.c b/drivers/pinctrl/core.c index ec3b8cc188af..df6296c5f47b 100644 --- a/drivers/pinctrl/core.c +++ b/drivers/pinctrl/core.c @@ -908,10 +908,6 @@ static int pinctrl_groups_show(struct seq_file *s, void *what) const struct pinctrl_ops *ops = pctldev->desc->pctlops; unsigned selector = 0; - /* No grouping */ - if (!ops) - return 0; - mutex_lock(&pinctrl_mutex); seq_puts(s, "registered pin groups:\n"); @@ -1225,6 +1221,19 @@ static void pinctrl_remove_device_debugfs(struct pinctrl_dev *pctldev) #endif +static int pinctrl_check_ops(struct pinctrl_dev *pctldev) +{ + const struct pinctrl_ops *ops = pctldev->desc->pctlops; + + if (!ops || + !ops->list_groups || + !ops->get_group_name || + !ops->get_group_pins) + return -EINVAL; + + return 0; +} + /** * pinctrl_register() - register a pin controller device * @pctldesc: descriptor for this pin controller @@ -1256,6 +1265,14 @@ struct pinctrl_dev *pinctrl_register(struct pinctrl_desc *pctldesc, INIT_LIST_HEAD(&pctldev->gpio_ranges); pctldev->dev = dev; + /* check core ops for sanity */ + ret = pinctrl_check_ops(pctldev); + if (ret) { + pr_err("%s pinctrl ops lacks necessary functions\n", + pctldesc->name); + goto out_err; + } + /* If we're implementing pinmuxing, check the ops for sanity */ if (pctldesc->pmxops) { ret = pinmux_check_ops(pctldev); -- cgit v1.2.3 From 57291ce295c0aca738dd284c4a9c591c09ebee71 Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Fri, 23 Mar 2012 10:29:46 -0600 Subject: pinctrl: core device tree mapping table parsing support During pinctrl_get(), if the client device has a device tree node, look for the common pinctrl properties there. If found, parse the referenced device tree nodes, with the help of the pinctrl drivers, and generate mapping table entries from them. During pinctrl_put(), free any results of device tree parsing. Acked-by: Dong Aisheng Signed-off-by: Stephen Warren Signed-off-by: Linus Walleij --- drivers/pinctrl/Makefile | 1 + drivers/pinctrl/core.c | 72 +++++++++--- drivers/pinctrl/core.h | 11 +- drivers/pinctrl/devicetree.c | 249 ++++++++++++++++++++++++++++++++++++++++ drivers/pinctrl/devicetree.h | 35 ++++++ include/linux/pinctrl/pinctrl.h | 7 ++ 6 files changed, 357 insertions(+), 18 deletions(-) create mode 100644 drivers/pinctrl/devicetree.c create mode 100644 drivers/pinctrl/devicetree.h diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile index 6d4150b4eced..049c9fb39dab 100644 --- a/drivers/pinctrl/Makefile +++ b/drivers/pinctrl/Makefile @@ -5,6 +5,7 @@ ccflags-$(CONFIG_DEBUG_PINCTRL) += -DDEBUG obj-$(CONFIG_PINCTRL) += core.o obj-$(CONFIG_PINMUX) += pinmux.o obj-$(CONFIG_PINCONF) += pinconf.o +obj-$(CONFIG_OF) += devicetree.o obj-$(CONFIG_GENERIC_PINCONF) += pinconf-generic.o obj-$(CONFIG_PINCTRL_PXA3xx) += pinctrl-pxa3xx.o obj-$(CONFIG_PINCTRL_MMP2) += pinctrl-mmp2.o diff --git a/drivers/pinctrl/core.c b/drivers/pinctrl/core.c index df6296c5f47b..832f71dcd8c4 100644 --- a/drivers/pinctrl/core.c +++ b/drivers/pinctrl/core.c @@ -26,6 +26,7 @@ #include #include #include "core.h" +#include "devicetree.h" #include "pinmux.h" #include "pinconf.h" @@ -45,7 +46,7 @@ struct pinctrl_maps { DEFINE_MUTEX(pinctrl_mutex); /* Global list of pin control devices (struct pinctrl_dev) */ -static LIST_HEAD(pinctrldev_list); +LIST_HEAD(pinctrldev_list); /* List of pin controller handles (struct pinctrl) */ static LIST_HEAD(pinctrl_list); @@ -579,6 +580,13 @@ static struct pinctrl *create_pinctrl(struct device *dev) } p->dev = dev; INIT_LIST_HEAD(&p->states); + INIT_LIST_HEAD(&p->dt_maps); + + ret = pinctrl_dt_to_map(p); + if (ret < 0) { + kfree(p); + return ERR_PTR(ret); + } devname = dev_name(dev); @@ -662,6 +670,8 @@ static void pinctrl_put_locked(struct pinctrl *p, bool inlist) kfree(state); } + pinctrl_dt_free_maps(p); + if (inlist) list_del(&p->node); kfree(p); @@ -787,15 +797,8 @@ int pinctrl_select_state(struct pinctrl *p, struct pinctrl_state *state) } EXPORT_SYMBOL_GPL(pinctrl_select_state); -/** - * pinctrl_register_mappings() - register a set of pin controller mappings - * @maps: the pincontrol mappings table to register. This should probably be - * marked with __initdata so it can be discarded after boot. This - * function will perform a shallow copy for the mapping entries. - * @num_maps: the number of maps in the mapping table - */ -int pinctrl_register_mappings(struct pinctrl_map const *maps, - unsigned num_maps) +int pinctrl_register_map(struct pinctrl_map const *maps, unsigned num_maps, + bool dup, bool locked) { int i, ret; struct pinctrl_maps *maps_node; @@ -851,20 +854,52 @@ int pinctrl_register_mappings(struct pinctrl_map const *maps, } maps_node->num_maps = num_maps; - maps_node->maps = kmemdup(maps, sizeof(*maps) * num_maps, GFP_KERNEL); - if (!maps_node->maps) { - pr_err("failed to duplicate mapping table\n"); - kfree(maps_node); - return -ENOMEM; + if (dup) { + maps_node->maps = kmemdup(maps, sizeof(*maps) * num_maps, + GFP_KERNEL); + if (!maps_node->maps) { + pr_err("failed to duplicate mapping table\n"); + kfree(maps_node); + return -ENOMEM; + } + } else { + maps_node->maps = maps; } - mutex_lock(&pinctrl_mutex); + if (!locked) + mutex_lock(&pinctrl_mutex); list_add_tail(&maps_node->node, &pinctrl_maps); - mutex_unlock(&pinctrl_mutex); + if (!locked) + mutex_unlock(&pinctrl_mutex); return 0; } +/** + * pinctrl_register_mappings() - register a set of pin controller mappings + * @maps: the pincontrol mappings table to register. This should probably be + * marked with __initdata so it can be discarded after boot. This + * function will perform a shallow copy for the mapping entries. + * @num_maps: the number of maps in the mapping table + */ +int pinctrl_register_mappings(struct pinctrl_map const *maps, + unsigned num_maps) +{ + return pinctrl_register_map(maps, num_maps, true, false); +} + +void pinctrl_unregister_map(struct pinctrl_map const *map) +{ + struct pinctrl_maps *maps_node; + + list_for_each_entry(maps_node, &pinctrl_maps, node) { + if (maps_node->maps == map) { + list_del(&maps_node->node); + return; + } + } +} + #ifdef CONFIG_DEBUG_FS static int pinctrl_pins_show(struct seq_file *s, void *what) @@ -1231,6 +1266,9 @@ static int pinctrl_check_ops(struct pinctrl_dev *pctldev) !ops->get_group_pins) return -EINVAL; + if (ops->dt_node_to_map && !ops->dt_free_map) + return -EINVAL; + return 0; } diff --git a/drivers/pinctrl/core.h b/drivers/pinctrl/core.h index 17ecf651b123..98ae8085e735 100644 --- a/drivers/pinctrl/core.h +++ b/drivers/pinctrl/core.h @@ -52,12 +52,15 @@ struct pinctrl_dev { * @dev: the device using this pin control handle * @states: a list of states for this device * @state: the current state + * @dt_maps: the mapping table chunks dynamically parsed from device tree for + * this device, if any */ struct pinctrl { struct list_head node; struct device *dev; struct list_head states; struct pinctrl_state *state; + struct list_head dt_maps; }; /** @@ -100,7 +103,8 @@ struct pinctrl_setting_configs { * struct pinctrl_setting - an individual mux or config setting * @node: list node for struct pinctrl_settings's @settings field * @type: the type of setting - * @pctldev: pin control device handling to be programmed + * @pctldev: pin control device handling to be programmed. Not used for + * PIN_MAP_TYPE_DUMMY_STATE. * @data: Data specific to the setting type */ struct pinctrl_setting { @@ -153,4 +157,9 @@ static inline struct pin_desc *pin_desc_get(struct pinctrl_dev *pctldev, return radix_tree_lookup(&pctldev->pin_desc_tree, pin); } +int pinctrl_register_map(struct pinctrl_map const *maps, unsigned num_maps, + bool dup, bool locked); +void pinctrl_unregister_map(struct pinctrl_map const *map); + extern struct mutex pinctrl_mutex; +extern struct list_head pinctrldev_list; diff --git a/drivers/pinctrl/devicetree.c b/drivers/pinctrl/devicetree.c new file mode 100644 index 000000000000..5ef2feb44395 --- /dev/null +++ b/drivers/pinctrl/devicetree.c @@ -0,0 +1,249 @@ +/* + * Device tree integration for the pin control subsystem + * + * Copyright (C) 2012 NVIDIA CORPORATION. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include +#include +#include +#include + +#include "core.h" +#include "devicetree.h" + +/** + * struct pinctrl_dt_map - mapping table chunk parsed from device tree + * @node: list node for struct pinctrl's @dt_maps field + * @pctldev: the pin controller that allocated this struct, and will free it + * @maps: the mapping table entries + */ +struct pinctrl_dt_map { + struct list_head node; + struct pinctrl_dev *pctldev; + struct pinctrl_map *map; + unsigned num_maps; +}; + +static void dt_free_map(struct pinctrl_dev *pctldev, + struct pinctrl_map *map, unsigned num_maps) +{ + if (pctldev) { + struct pinctrl_ops *ops = pctldev->desc->pctlops; + ops->dt_free_map(pctldev, map, num_maps); + } else { + /* There is no pctldev for PIN_MAP_TYPE_DUMMY_STATE */ + kfree(map); + } +} + +void pinctrl_dt_free_maps(struct pinctrl *p) +{ + struct pinctrl_dt_map *dt_map, *n1; + + list_for_each_entry_safe(dt_map, n1, &p->dt_maps, node) { + pinctrl_unregister_map(dt_map->map); + list_del(&dt_map->node); + dt_free_map(dt_map->pctldev, dt_map->map, + dt_map->num_maps); + kfree(dt_map); + } + + of_node_put(p->dev->of_node); +} + +static int dt_remember_or_free_map(struct pinctrl *p, const char *statename, + struct pinctrl_dev *pctldev, + struct pinctrl_map *map, unsigned num_maps) +{ + int i; + struct pinctrl_dt_map *dt_map; + + /* Initialize common mapping table entry fields */ + for (i = 0; i < num_maps; i++) { + map[i].dev_name = dev_name(p->dev); + map[i].name = statename; + if (pctldev) + map[i].ctrl_dev_name = dev_name(pctldev->dev); + } + + /* Remember the converted mapping table entries */ + dt_map = kzalloc(sizeof(*dt_map), GFP_KERNEL); + if (!dt_map) { + dev_err(p->dev, "failed to alloc struct pinctrl_dt_map\n"); + dt_free_map(pctldev, map, num_maps); + return -ENOMEM; + } + + dt_map->pctldev = pctldev; + dt_map->map = map; + dt_map->num_maps = num_maps; + list_add_tail(&dt_map->node, &p->dt_maps); + + return pinctrl_register_map(map, num_maps, false, true); +} + +static struct pinctrl_dev *find_pinctrl_by_of_node(struct device_node *np) +{ + struct pinctrl_dev *pctldev; + + list_for_each_entry(pctldev, &pinctrldev_list, node) + if (pctldev->dev->of_node == np) + return pctldev; + + return NULL; +} + +static int dt_to_map_one_config(struct pinctrl *p, const char *statename, + struct device_node *np_config) +{ + struct device_node *np_pctldev; + struct pinctrl_dev *pctldev; + struct pinctrl_ops *ops; + int ret; + struct pinctrl_map *map; + unsigned num_maps; + + /* Find the pin controller containing np_config */ + np_pctldev = of_node_get(np_config); + for (;;) { + np_pctldev = of_get_next_parent(np_pctldev); + if (!np_pctldev || of_node_is_root(np_pctldev)) { + dev_err(p->dev, "could not find pctldev for node %s\n", + np_config->full_name); + of_node_put(np_pctldev); + /* FIXME: This should trigger deferrered probe */ + return -ENODEV; + } + pctldev = find_pinctrl_by_of_node(np_pctldev); + if (pctldev) + break; + } + of_node_put(np_pctldev); + + /* + * Call pinctrl driver to parse device tree node, and + * generate mapping table entries + */ + ops = pctldev->desc->pctlops; + if (!ops->dt_node_to_map) { + dev_err(p->dev, "pctldev %s doesn't support DT\n", + dev_name(pctldev->dev)); + return -ENODEV; + } + ret = ops->dt_node_to_map(pctldev, np_config, &map, &num_maps); + if (ret < 0) + return ret; + + /* Stash the mapping table chunk away for later use */ + return dt_remember_or_free_map(p, statename, pctldev, map, num_maps); +} + +static int dt_remember_dummy_state(struct pinctrl *p, const char *statename) +{ + struct pinctrl_map *map; + + map = kzalloc(sizeof(*map), GFP_KERNEL); + if (!map) { + dev_err(p->dev, "failed to alloc struct pinctrl_map\n"); + return -ENOMEM; + } + + /* There is no pctldev for PIN_MAP_TYPE_DUMMY_STATE */ + map->type = PIN_MAP_TYPE_DUMMY_STATE; + + return dt_remember_or_free_map(p, statename, NULL, map, 1); +} + +int pinctrl_dt_to_map(struct pinctrl *p) +{ + struct device_node *np = p->dev->of_node; + int state, ret; + char *propname; + struct property *prop; + const char *statename; + const __be32 *list; + int size, config; + phandle phandle; + struct device_node *np_config; + + /* CONFIG_OF enabled, p->dev not instantiated from DT */ + if (!np) { + dev_dbg(p->dev, "no of_node; not parsing pinctrl DT\n"); + return 0; + } + + /* We may store pointers to property names within the node */ + of_node_get(np); + + /* For each defined state ID */ + for (state = 0; ; state++) { + /* Retrieve the pinctrl-* property */ + propname = kasprintf(GFP_KERNEL, "pinctrl-%d", state); + prop = of_find_property(np, propname, &size); + kfree(propname); + if (!prop) + break; + list = prop->value; + size /= sizeof(*list); + + /* Determine whether pinctrl-names property names the state */ + ret = of_property_read_string_index(np, "pinctrl-names", + state, &statename); + /* + * If not, statename is just the integer state ID. But rather + * than dynamically allocate it and have to free it later, + * just point part way into the property name for the string. + */ + if (ret < 0) { + /* strlen("pinctrl-") == 8 */ + statename = prop->name + 8; + } + + /* For every referenced pin configuration node in it */ + for (config = 0; config < size; config++) { + phandle = be32_to_cpup(list++); + + /* Look up the pin configuration node */ + np_config = of_find_node_by_phandle(phandle); + if (!np_config) { + dev_err(p->dev, + "prop %s index %i invalid phandle\n", + prop->name, config); + ret = -EINVAL; + goto err; + } + + /* Parse the node */ + ret = dt_to_map_one_config(p, statename, np_config); + of_node_put(np_config); + if (ret < 0) + goto err; + } + + /* No entries in DT? Generate a dummy state table entry */ + if (!size) { + ret = dt_remember_dummy_state(p, statename); + if (ret < 0) + goto err; + } + } + + return 0; + +err: + pinctrl_dt_free_maps(p); + return ret; +} diff --git a/drivers/pinctrl/devicetree.h b/drivers/pinctrl/devicetree.h new file mode 100644 index 000000000000..760bc4960f58 --- /dev/null +++ b/drivers/pinctrl/devicetree.h @@ -0,0 +1,35 @@ +/* + * Internal interface to pinctrl device tree integration + * + * Copyright (C) 2012 NVIDIA CORPORATION. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#ifdef CONFIG_OF + +void pinctrl_dt_free_maps(struct pinctrl *p); +int pinctrl_dt_to_map(struct pinctrl *p); + +#else + +static inline int pinctrl_dt_to_map(struct pinctrl *p) +{ + return 0; +} + +static inline void pinctrl_dt_free_maps(struct pinctrl *p) +{ +} + +#endif diff --git a/include/linux/pinctrl/pinctrl.h b/include/linux/pinctrl/pinctrl.h index 4e9f0788c221..aa92cdeb99fd 100644 --- a/include/linux/pinctrl/pinctrl.h +++ b/include/linux/pinctrl/pinctrl.h @@ -21,9 +21,11 @@ struct device; struct pinctrl_dev; +struct pinctrl_map; struct pinmux_ops; struct pinconf_ops; struct gpio_chip; +struct device_node; /** * struct pinctrl_pin_desc - boards/machines provide information on their @@ -83,6 +85,11 @@ struct pinctrl_ops { unsigned *num_pins); void (*pin_dbg_show) (struct pinctrl_dev *pctldev, struct seq_file *s, unsigned offset); + int (*dt_node_to_map) (struct pinctrl_dev *pctldev, + struct device_node *np_config, + struct pinctrl_map **map, unsigned *num_maps); + void (*dt_free_map) (struct pinctrl_dev *pctldev, + struct pinctrl_map *map, unsigned num_maps); }; /** -- cgit v1.2.3 From eafeb7a44aa8f79c992b9d557ede740c739f4b25 Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Tue, 3 Apr 2012 21:53:56 -0600 Subject: pinctrl: fix build when CONFIG_OF && !CONFIG_PINCTRL pinctrl/devicetree.c won't compile when !CONFIG_PINCTRL, since the pinctrl headers don't declare some types when !PINCTRL. Make sure pinctrl/Makefile only attempts to compile devicetree.c when OF && PINCTRL. Acked-by: Dong Aisheng Signed-off-by: Stephen Warren Signed-off-by: Linus Walleij --- drivers/pinctrl/Makefile | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile index 049c9fb39dab..8e3c95a02fbd 100644 --- a/drivers/pinctrl/Makefile +++ b/drivers/pinctrl/Makefile @@ -5,7 +5,9 @@ ccflags-$(CONFIG_DEBUG_PINCTRL) += -DDEBUG obj-$(CONFIG_PINCTRL) += core.o obj-$(CONFIG_PINMUX) += pinmux.o obj-$(CONFIG_PINCONF) += pinconf.o -obj-$(CONFIG_OF) += devicetree.o +ifeq ($(CONFIG_OF),y) +obj-$(CONFIG_PINCTRL) += devicetree.o +endif obj-$(CONFIG_GENERIC_PINCONF) += pinconf-generic.o obj-$(CONFIG_PINCTRL_PXA3xx) += pinctrl-pxa3xx.o obj-$(CONFIG_PINCTRL_MMP2) += pinctrl-mmp2.o -- cgit v1.2.3 From eb181c3533e8e5b3eaa96d3e8ed1cf5d9a408076 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Thu, 29 Mar 2012 11:03:27 +0530 Subject: Documentation: pinctrl: add missing spi0_0 grp in example Missed one group from the documentation when proofreading. Signed-off-by: Viresh Kumar Signed-off-by: Linus Walleij --- Documentation/pinctrl.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/pinctrl.txt b/Documentation/pinctrl.txt index d97bccf46147..f2e27ef8e1b3 100644 --- a/Documentation/pinctrl.txt +++ b/Documentation/pinctrl.txt @@ -640,7 +640,7 @@ struct foo_pmx_func { const unsigned num_groups; }; -static const char * const spi0_groups[] = { "spi0_1_grp" }; +static const char * const spi0_groups[] = { "spi0_0_grp", "spi0_1_grp" }; static const char * const i2c0_groups[] = { "i2c0_grp" }; static const char * const mmc0_groups[] = { "mmc0_1_grp", "mmc0_2_grp", "mmc0_3_grp" }; -- cgit v1.2.3 From 122dbe7e58c7d064a17eefd33205227e6bce85ca Mon Sep 17 00:00:00 2001 From: Uwe Kleine-König Date: Fri, 30 Mar 2012 22:04:51 +0200 Subject: pinctrl: mark const init data with __initconst instead of __initdata MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit As long as there is no other non-const variable marked __initdata in the same compilation unit it doesn't hurt. If there were one however compilation would fail with error: $variablename causes a section type conflict because a section containing const variables is marked read only and so cannot contain non-const variables. Signed-off-by: Uwe Kleine-König Cc: Randy Dunlap Signed-off-by: Linus Walleij --- Documentation/pinctrl.txt | 2 +- drivers/pinctrl/pinctrl-coh901.c | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/Documentation/pinctrl.txt b/Documentation/pinctrl.txt index f2e27ef8e1b3..2d88b3c7b61c 100644 --- a/Documentation/pinctrl.txt +++ b/Documentation/pinctrl.txt @@ -786,7 +786,7 @@ and spi on the second function mapping: #include -static const struct pinctrl_map __initdata mapping[] = { +static const struct pinctrl_map mapping[] __initconst = { { .dev_name = "foo-spi.0", .name = PINCTRL_STATE_DEFAULT, diff --git a/drivers/pinctrl/pinctrl-coh901.c b/drivers/pinctrl/pinctrl-coh901.c index 0797eba3e33a..55697a5d7482 100644 --- a/drivers/pinctrl/pinctrl-coh901.c +++ b/drivers/pinctrl/pinctrl-coh901.c @@ -174,7 +174,7 @@ struct u300_gpio_confdata { /* Initial configuration */ -static const struct __initdata u300_gpio_confdata +static const struct __initconst u300_gpio_confdata bs335_gpio_config[BS335_GPIO_NUM_PORTS][U300_GPIO_PINS_PER_PORT] = { /* Port 0, pins 0-7 */ { @@ -255,7 +255,7 @@ bs335_gpio_config[BS335_GPIO_NUM_PORTS][U300_GPIO_PINS_PER_PORT] = { } }; -static const struct __initdata u300_gpio_confdata +static const struct __initconst u300_gpio_confdata bs365_gpio_config[BS365_GPIO_NUM_PORTS][U300_GPIO_PINS_PER_PORT] = { /* Port 0, pins 0-7 */ { -- cgit v1.2.3 From d1e90e9e7467dbfe521b25ba79f520bf676ebc36 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Fri, 30 Mar 2012 11:25:40 +0530 Subject: pinctrl: replace list_*() with get_*_count() Most of the SoC drivers implement list_groups() and list_functions() routines for pinctrl and pinmux. These routines continue returning zero until the selector argument is greater than total count of available groups or functions. This patch replaces these list_*() routines with get_*_count() routines, which returns the number of available selection for SoC driver. pinctrl layer will use this value to check the range it can choose. This patch fixes all user drivers for this change. There are other routines in user drivers, which have checks to check validity of selector passed to them. It is also no more required and hence removed. Documentation updated as well. Acked-by: Stephen Warren Signed-off-by: Viresh Kumar [Folded in fix and fixed a minor merge artifact manually] Signed-off-by: Linus Walleij --- Documentation/pinctrl.txt | 37 +++++++++++++++---------------------- drivers/pinctrl/core.c | 10 ++++++---- drivers/pinctrl/pinconf.c | 3 ++- drivers/pinctrl/pinctrl-pxa3xx.c | 24 ++++++++++-------------- drivers/pinctrl/pinctrl-sirf.c | 20 ++++++-------------- drivers/pinctrl/pinctrl-tegra.c | 40 ++++++---------------------------------- drivers/pinctrl/pinctrl-u300.c | 20 ++++++-------------- drivers/pinctrl/pinmux.c | 11 +++++++---- include/linux/pinctrl/pinctrl.h | 6 ++---- include/linux/pinctrl/pinmux.h | 7 +++---- 10 files changed, 63 insertions(+), 115 deletions(-) diff --git a/Documentation/pinctrl.txt b/Documentation/pinctrl.txt index 2d88b3c7b61c..eb46b1c0b07a 100644 --- a/Documentation/pinctrl.txt +++ b/Documentation/pinctrl.txt @@ -152,11 +152,9 @@ static const struct foo_group foo_groups[] = { }; -static int foo_list_groups(struct pinctrl_dev *pctldev, unsigned selector) +static int foo_get_groups_count(struct pinctrl_dev *pctldev) { - if (selector >= ARRAY_SIZE(foo_groups)) - return -EINVAL; - return 0; + return ARRAY_SIZE(foo_groups); } static const char *foo_get_group_name(struct pinctrl_dev *pctldev, @@ -175,7 +173,7 @@ static int foo_get_group_pins(struct pinctrl_dev *pctldev, unsigned selector, } static struct pinctrl_ops foo_pctrl_ops = { - .list_groups = foo_list_groups, + .get_groups_count = foo_get_groups_count, .get_group_name = foo_get_group_name, .get_group_pins = foo_get_group_pins, }; @@ -186,13 +184,12 @@ static struct pinctrl_desc foo_desc = { .pctlops = &foo_pctrl_ops, }; -The pin control subsystem will call the .list_groups() function repeatedly -beginning on 0 until it returns non-zero to determine legal selectors, then -it will call the other functions to retrieve the name and pins of the group. -Maintaining the data structure of the groups is up to the driver, this is -just a simple example - in practice you may need more entries in your group -structure, for example specific register ranges associated with each group -and so on. +The pin control subsystem will call the .get_groups_count() function to +determine total number of legal selectors, then it will call the other functions +to retrieve the name and pins of the group. Maintaining the data structure of +the groups is up to the driver, this is just a simple example - in practice you +may need more entries in your group structure, for example specific register +ranges associated with each group and so on. Pin configuration @@ -606,11 +603,9 @@ static const struct foo_group foo_groups[] = { }; -static int foo_list_groups(struct pinctrl_dev *pctldev, unsigned selector) +static int foo_get_groups_count(struct pinctrl_dev *pctldev) { - if (selector >= ARRAY_SIZE(foo_groups)) - return -EINVAL; - return 0; + return ARRAY_SIZE(foo_groups); } static const char *foo_get_group_name(struct pinctrl_dev *pctldev, @@ -629,7 +624,7 @@ static int foo_get_group_pins(struct pinctrl_dev *pctldev, unsigned selector, } static struct pinctrl_ops foo_pctrl_ops = { - .list_groups = foo_list_groups, + .get_groups_count = foo_get_groups_count, .get_group_name = foo_get_group_name, .get_group_pins = foo_get_group_pins, }; @@ -663,11 +658,9 @@ static const struct foo_pmx_func foo_functions[] = { }, }; -int foo_list_funcs(struct pinctrl_dev *pctldev, unsigned selector) +int foo_get_functions_count(struct pinctrl_dev *pctldev) { - if (selector >= ARRAY_SIZE(foo_functions)) - return -EINVAL; - return 0; + return ARRAY_SIZE(foo_functions); } const char *foo_get_fname(struct pinctrl_dev *pctldev, unsigned selector) @@ -703,7 +696,7 @@ void foo_disable(struct pinctrl_dev *pctldev, unsigned selector, } struct pinmux_ops foo_pmxops = { - .list_functions = foo_list_funcs, + .get_functions_count = foo_get_functions_count, .get_function_name = foo_get_fname, .get_function_groups = foo_get_groups, .enable = foo_enable, diff --git a/drivers/pinctrl/core.c b/drivers/pinctrl/core.c index 832f71dcd8c4..7ff869007ba4 100644 --- a/drivers/pinctrl/core.c +++ b/drivers/pinctrl/core.c @@ -319,9 +319,10 @@ int pinctrl_get_group_selector(struct pinctrl_dev *pctldev, const char *pin_group) { const struct pinctrl_ops *pctlops = pctldev->desc->pctlops; + unsigned ngroups = pctlops->get_groups_count(pctldev); unsigned group_selector = 0; - while (pctlops->list_groups(pctldev, group_selector) >= 0) { + while (group_selector < ngroups) { const char *gname = pctlops->get_group_name(pctldev, group_selector); if (!strcmp(gname, pin_group)) { @@ -941,12 +942,13 @@ static int pinctrl_groups_show(struct seq_file *s, void *what) { struct pinctrl_dev *pctldev = s->private; const struct pinctrl_ops *ops = pctldev->desc->pctlops; - unsigned selector = 0; + unsigned ngroups, selector = 0; + ngroups = ops->get_groups_count(pctldev); mutex_lock(&pinctrl_mutex); seq_puts(s, "registered pin groups:\n"); - while (ops->list_groups(pctldev, selector) >= 0) { + while (selector < ngroups) { const unsigned *pins; unsigned num_pins; const char *gname = ops->get_group_name(pctldev, selector); @@ -1261,7 +1263,7 @@ static int pinctrl_check_ops(struct pinctrl_dev *pctldev) const struct pinctrl_ops *ops = pctldev->desc->pctlops; if (!ops || - !ops->list_groups || + !ops->get_groups_count || !ops->get_group_name || !ops->get_group_pins) return -EINVAL; diff --git a/drivers/pinctrl/pinconf.c b/drivers/pinctrl/pinconf.c index 7321e8601294..eb3a14f4b866 100644 --- a/drivers/pinctrl/pinconf.c +++ b/drivers/pinctrl/pinconf.c @@ -495,6 +495,7 @@ static int pinconf_groups_show(struct seq_file *s, void *what) struct pinctrl_dev *pctldev = s->private; const struct pinctrl_ops *pctlops = pctldev->desc->pctlops; const struct pinconf_ops *ops = pctldev->desc->confops; + unsigned ngroups = pctlops->get_groups_count(pctldev); unsigned selector = 0; if (!ops || !ops->pin_config_group_get) @@ -505,7 +506,7 @@ static int pinconf_groups_show(struct seq_file *s, void *what) mutex_lock(&pinctrl_mutex); - while (pctlops->list_groups(pctldev, selector) >= 0) { + while (selector < ngroups) { const char *gname = pctlops->get_group_name(pctldev, selector); seq_printf(s, "%u (%s):", selector, gname); diff --git a/drivers/pinctrl/pinctrl-pxa3xx.c b/drivers/pinctrl/pinctrl-pxa3xx.c index 079dce0e93e9..7644e42ac211 100644 --- a/drivers/pinctrl/pinctrl-pxa3xx.c +++ b/drivers/pinctrl/pinctrl-pxa3xx.c @@ -25,20 +25,18 @@ static struct pinctrl_gpio_range pxa3xx_pinctrl_gpio_range = { .pin_base = 0, }; -static int pxa3xx_list_groups(struct pinctrl_dev *pctrldev, unsigned selector) +static int pxa3xx_get_groups_count(struct pinctrl_dev *pctrldev) { struct pxa3xx_pinmux_info *info = pinctrl_dev_get_drvdata(pctrldev); - if (selector >= info->num_grps) - return -EINVAL; - return 0; + + return info->num_grps; } static const char *pxa3xx_get_group_name(struct pinctrl_dev *pctrldev, unsigned selector) { struct pxa3xx_pinmux_info *info = pinctrl_dev_get_drvdata(pctrldev); - if (selector >= info->num_grps) - return NULL; + return info->grps[selector].name; } @@ -48,25 +46,23 @@ static int pxa3xx_get_group_pins(struct pinctrl_dev *pctrldev, unsigned *num_pins) { struct pxa3xx_pinmux_info *info = pinctrl_dev_get_drvdata(pctrldev); - if (selector >= info->num_grps) - return -EINVAL; + *pins = info->grps[selector].pins; *num_pins = info->grps[selector].npins; return 0; } static struct pinctrl_ops pxa3xx_pctrl_ops = { - .list_groups = pxa3xx_list_groups, + .get_groups_count = pxa3xx_get_groups_count, .get_group_name = pxa3xx_get_group_name, .get_group_pins = pxa3xx_get_group_pins, }; -static int pxa3xx_pmx_list_func(struct pinctrl_dev *pctrldev, unsigned func) +static int pxa3xx_pmx_get_funcs_count(struct pinctrl_dev *pctrldev) { struct pxa3xx_pinmux_info *info = pinctrl_dev_get_drvdata(pctrldev); - if (func >= info->num_funcs) - return -EINVAL; - return 0; + + return info->num_funcs; } static const char *pxa3xx_pmx_get_func_name(struct pinctrl_dev *pctrldev, @@ -170,7 +166,7 @@ static int pxa3xx_pmx_request_gpio(struct pinctrl_dev *pctrldev, } static struct pinmux_ops pxa3xx_pmx_ops = { - .list_functions = pxa3xx_pmx_list_func, + .get_functions_count = pxa3xx_pmx_get_funcs_count, .get_function_name = pxa3xx_pmx_get_func_name, .get_function_groups = pxa3xx_pmx_get_groups, .enable = pxa3xx_pmx_enable, diff --git a/drivers/pinctrl/pinctrl-sirf.c b/drivers/pinctrl/pinctrl-sirf.c index 6b3534cc051a..ba15b1a29e52 100644 --- a/drivers/pinctrl/pinctrl-sirf.c +++ b/drivers/pinctrl/pinctrl-sirf.c @@ -853,18 +853,14 @@ static const struct sirfsoc_pin_group sirfsoc_pin_groups[] = { SIRFSOC_PIN_GROUP("gpsgrp", gps_pins), }; -static int sirfsoc_list_groups(struct pinctrl_dev *pctldev, unsigned selector) +static int sirfsoc_get_groups_count(struct pinctrl_dev *pctldev) { - if (selector >= ARRAY_SIZE(sirfsoc_pin_groups)) - return -EINVAL; - return 0; + return ARRAY_SIZE(sirfsoc_pin_groups); } static const char *sirfsoc_get_group_name(struct pinctrl_dev *pctldev, unsigned selector) { - if (selector >= ARRAY_SIZE(sirfsoc_pin_groups)) - return NULL; return sirfsoc_pin_groups[selector].name; } @@ -872,8 +868,6 @@ static int sirfsoc_get_group_pins(struct pinctrl_dev *pctldev, unsigned selector const unsigned **pins, unsigned *num_pins) { - if (selector >= ARRAY_SIZE(sirfsoc_pin_groups)) - return -EINVAL; *pins = sirfsoc_pin_groups[selector].pins; *num_pins = sirfsoc_pin_groups[selector].num_pins; return 0; @@ -886,7 +880,7 @@ static void sirfsoc_pin_dbg_show(struct pinctrl_dev *pctldev, struct seq_file *s } static struct pinctrl_ops sirfsoc_pctrl_ops = { - .list_groups = sirfsoc_list_groups, + .get_groups_count = sirfsoc_get_groups_count, .get_group_name = sirfsoc_get_group_name, .get_group_pins = sirfsoc_get_group_pins, .pin_dbg_show = sirfsoc_pin_dbg_show, @@ -1033,11 +1027,9 @@ static void sirfsoc_pinmux_disable(struct pinctrl_dev *pmxdev, unsigned selector sirfsoc_pinmux_endisable(spmx, selector, false); } -static int sirfsoc_pinmux_list_funcs(struct pinctrl_dev *pmxdev, unsigned selector) +static int sirfsoc_pinmux_get_funcs_count(struct pinctrl_dev *pmxdev) { - if (selector >= ARRAY_SIZE(sirfsoc_pmx_functions)) - return -EINVAL; - return 0; + return ARRAY_SIZE(sirfsoc_pmx_functions); } static const char *sirfsoc_pinmux_get_func_name(struct pinctrl_dev *pctldev, @@ -1074,9 +1066,9 @@ static int sirfsoc_pinmux_request_gpio(struct pinctrl_dev *pmxdev, } static struct pinmux_ops sirfsoc_pinmux_ops = { - .list_functions = sirfsoc_pinmux_list_funcs, .enable = sirfsoc_pinmux_enable, .disable = sirfsoc_pinmux_disable, + .get_functions_count = sirfsoc_pinmux_get_funcs_count, .get_function_name = sirfsoc_pinmux_get_func_name, .get_function_groups = sirfsoc_pinmux_get_groups, .gpio_request_enable = sirfsoc_pinmux_request_gpio, diff --git a/drivers/pinctrl/pinctrl-tegra.c b/drivers/pinctrl/pinctrl-tegra.c index 9b329688120c..41311a2a4256 100644 --- a/drivers/pinctrl/pinctrl-tegra.c +++ b/drivers/pinctrl/pinctrl-tegra.c @@ -53,15 +53,11 @@ static inline void pmx_writel(struct tegra_pmx *pmx, u32 val, u32 bank, u32 reg) writel(val, pmx->regs[bank] + reg); } -static int tegra_pinctrl_list_groups(struct pinctrl_dev *pctldev, - unsigned group) +static int tegra_pinctrl_get_groups_count(struct pinctrl_dev *pctldev) { struct tegra_pmx *pmx = pinctrl_dev_get_drvdata(pctldev); - if (group >= pmx->soc->ngroups) - return -EINVAL; - - return 0; + return pmx->soc->ngroups; } static const char *tegra_pinctrl_get_group_name(struct pinctrl_dev *pctldev, @@ -69,9 +65,6 @@ static const char *tegra_pinctrl_get_group_name(struct pinctrl_dev *pctldev, { struct tegra_pmx *pmx = pinctrl_dev_get_drvdata(pctldev); - if (group >= pmx->soc->ngroups) - return NULL; - return pmx->soc->groups[group].name; } @@ -82,9 +75,6 @@ static int tegra_pinctrl_get_group_pins(struct pinctrl_dev *pctldev, { struct tegra_pmx *pmx = pinctrl_dev_get_drvdata(pctldev); - if (group >= pmx->soc->ngroups) - return -EINVAL; - *pins = pmx->soc->groups[group].pins; *num_pins = pmx->soc->groups[group].npins; @@ -99,21 +89,17 @@ static void tegra_pinctrl_pin_dbg_show(struct pinctrl_dev *pctldev, } static struct pinctrl_ops tegra_pinctrl_ops = { - .list_groups = tegra_pinctrl_list_groups, + .get_groups_count = tegra_pinctrl_get_groups_count, .get_group_name = tegra_pinctrl_get_group_name, .get_group_pins = tegra_pinctrl_get_group_pins, .pin_dbg_show = tegra_pinctrl_pin_dbg_show, }; -static int tegra_pinctrl_list_funcs(struct pinctrl_dev *pctldev, - unsigned function) +static int tegra_pinctrl_get_funcs_count(struct pinctrl_dev *pctldev) { struct tegra_pmx *pmx = pinctrl_dev_get_drvdata(pctldev); - if (function >= pmx->soc->nfunctions) - return -EINVAL; - - return 0; + return pmx->soc->nfunctions; } static const char *tegra_pinctrl_get_func_name(struct pinctrl_dev *pctldev, @@ -121,9 +107,6 @@ static const char *tegra_pinctrl_get_func_name(struct pinctrl_dev *pctldev, { struct tegra_pmx *pmx = pinctrl_dev_get_drvdata(pctldev); - if (function >= pmx->soc->nfunctions) - return NULL; - return pmx->soc->functions[function].name; } @@ -134,9 +117,6 @@ static int tegra_pinctrl_get_func_groups(struct pinctrl_dev *pctldev, { struct tegra_pmx *pmx = pinctrl_dev_get_drvdata(pctldev); - if (function >= pmx->soc->nfunctions) - return -EINVAL; - *groups = pmx->soc->functions[function].groups; *num_groups = pmx->soc->functions[function].ngroups; @@ -151,8 +131,6 @@ static int tegra_pinctrl_enable(struct pinctrl_dev *pctldev, unsigned function, int i; u32 val; - if (group >= pmx->soc->ngroups) - return -EINVAL; g = &pmx->soc->groups[group]; if (g->mux_reg < 0) @@ -180,8 +158,6 @@ static void tegra_pinctrl_disable(struct pinctrl_dev *pctldev, const struct tegra_pingroup *g; u32 val; - if (group >= pmx->soc->ngroups) - return; g = &pmx->soc->groups[group]; if (g->mux_reg < 0) @@ -194,7 +170,7 @@ static void tegra_pinctrl_disable(struct pinctrl_dev *pctldev, } static struct pinmux_ops tegra_pinmux_ops = { - .list_functions = tegra_pinctrl_list_funcs, + .get_functions_count = tegra_pinctrl_get_funcs_count, .get_function_name = tegra_pinctrl_get_func_name, .get_function_groups = tegra_pinctrl_get_func_groups, .enable = tegra_pinctrl_enable, @@ -324,8 +300,6 @@ static int tegra_pinconf_group_get(struct pinctrl_dev *pctldev, s16 reg; u32 val, mask; - if (group >= pmx->soc->ngroups) - return -EINVAL; g = &pmx->soc->groups[group]; ret = tegra_pinconf_reg(pmx, g, param, &bank, ®, &bit, &width); @@ -353,8 +327,6 @@ static int tegra_pinconf_group_set(struct pinctrl_dev *pctldev, s16 reg; u32 val, mask; - if (group >= pmx->soc->ngroups) - return -EINVAL; g = &pmx->soc->groups[group]; ret = tegra_pinconf_reg(pmx, g, param, &bank, ®, &bit, &width); diff --git a/drivers/pinctrl/pinctrl-u300.c b/drivers/pinctrl/pinctrl-u300.c index 26eb8ccd72d5..05d029911be6 100644 --- a/drivers/pinctrl/pinctrl-u300.c +++ b/drivers/pinctrl/pinctrl-u300.c @@ -836,18 +836,14 @@ static const struct u300_pin_group u300_pin_groups[] = { }, }; -static int u300_list_groups(struct pinctrl_dev *pctldev, unsigned selector) +static int u300_get_groups_count(struct pinctrl_dev *pctldev) { - if (selector >= ARRAY_SIZE(u300_pin_groups)) - return -EINVAL; - return 0; + return ARRAY_SIZE(u300_pin_groups); } static const char *u300_get_group_name(struct pinctrl_dev *pctldev, unsigned selector) { - if (selector >= ARRAY_SIZE(u300_pin_groups)) - return NULL; return u300_pin_groups[selector].name; } @@ -855,8 +851,6 @@ static int u300_get_group_pins(struct pinctrl_dev *pctldev, unsigned selector, const unsigned **pins, unsigned *num_pins) { - if (selector >= ARRAY_SIZE(u300_pin_groups)) - return -EINVAL; *pins = u300_pin_groups[selector].pins; *num_pins = u300_pin_groups[selector].num_pins; return 0; @@ -869,7 +863,7 @@ static void u300_pin_dbg_show(struct pinctrl_dev *pctldev, struct seq_file *s, } static struct pinctrl_ops u300_pctrl_ops = { - .list_groups = u300_list_groups, + .get_groups_count = u300_get_groups_count, .get_group_name = u300_get_group_name, .get_group_pins = u300_get_group_pins, .pin_dbg_show = u300_pin_dbg_show, @@ -991,11 +985,9 @@ static void u300_pmx_disable(struct pinctrl_dev *pctldev, unsigned selector, u300_pmx_endisable(upmx, selector, false); } -static int u300_pmx_list_funcs(struct pinctrl_dev *pctldev, unsigned selector) +static int u300_pmx_get_funcs_count(struct pinctrl_dev *pctldev) { - if (selector >= ARRAY_SIZE(u300_pmx_functions)) - return -EINVAL; - return 0; + return ARRAY_SIZE(u300_pmx_functions); } static const char *u300_pmx_get_func_name(struct pinctrl_dev *pctldev, @@ -1014,7 +1006,7 @@ static int u300_pmx_get_groups(struct pinctrl_dev *pctldev, unsigned selector, } static struct pinmux_ops u300_pmx_ops = { - .list_functions = u300_pmx_list_funcs, + .get_functions_count = u300_pmx_get_funcs_count, .get_function_name = u300_pmx_get_func_name, .get_function_groups = u300_pmx_get_groups, .enable = u300_pmx_enable, diff --git a/drivers/pinctrl/pinmux.c b/drivers/pinctrl/pinmux.c index 4e62783a573a..375b214780e9 100644 --- a/drivers/pinctrl/pinmux.c +++ b/drivers/pinctrl/pinmux.c @@ -33,10 +33,11 @@ int pinmux_check_ops(struct pinctrl_dev *pctldev) { const struct pinmux_ops *ops = pctldev->desc->pmxops; + unsigned nfuncs = ops->get_functions_count(pctldev); unsigned selector = 0; /* Check that we implement required operations */ - if (!ops->list_functions || + if (!ops->get_functions_count || !ops->get_function_name || !ops->get_function_groups || !ops->enable || @@ -44,7 +45,7 @@ int pinmux_check_ops(struct pinctrl_dev *pctldev) return -EINVAL; /* Check that all functions registered have names */ - while (ops->list_functions(pctldev, selector) >= 0) { + while (selector < nfuncs) { const char *fname = ops->get_function_name(pctldev, selector); if (!fname) { @@ -287,10 +288,11 @@ static int pinmux_func_name_to_selector(struct pinctrl_dev *pctldev, const char *function) { const struct pinmux_ops *ops = pctldev->desc->pmxops; + unsigned nfuncs = ops->get_functions_count(pctldev); unsigned selector = 0; /* See if this pctldev has this function */ - while (ops->list_functions(pctldev, selector) >= 0) { + while (selector < nfuncs) { const char *fname = ops->get_function_name(pctldev, selector); @@ -477,11 +479,12 @@ static int pinmux_functions_show(struct seq_file *s, void *what) { struct pinctrl_dev *pctldev = s->private; const struct pinmux_ops *pmxops = pctldev->desc->pmxops; + unsigned nfuncs = pmxops->get_functions_count(pctldev); unsigned func_selector = 0; mutex_lock(&pinctrl_mutex); - while (pmxops->list_functions(pctldev, func_selector) >= 0) { + while (func_selector < nfuncs) { const char *func = pmxops->get_function_name(pctldev, func_selector); const char * const *groups; diff --git a/include/linux/pinctrl/pinctrl.h b/include/linux/pinctrl/pinctrl.h index aa92cdeb99fd..c22d0409d2ef 100644 --- a/include/linux/pinctrl/pinctrl.h +++ b/include/linux/pinctrl/pinctrl.h @@ -66,9 +66,7 @@ struct pinctrl_gpio_range { /** * struct pinctrl_ops - global pin control operations, to be implemented by * pin controller drivers. - * @list_groups: list the number of selectable named groups available - * in this pinmux driver, the core will begin on 0 and call this - * repeatedly as long as it returns >= 0 to enumerate the groups + * @get_groups_count: Returns the count of total number of groups registered. * @get_group_name: return the group name of the pin group * @get_group_pins: return an array of pins corresponding to a certain * group selector @pins, and the size of the array in @num_pins @@ -76,7 +74,7 @@ struct pinctrl_gpio_range { * info for a certain pin in debugfs */ struct pinctrl_ops { - int (*list_groups) (struct pinctrl_dev *pctldev, unsigned selector); + int (*get_groups_count) (struct pinctrl_dev *pctldev); const char *(*get_group_name) (struct pinctrl_dev *pctldev, unsigned selector); int (*get_group_pins) (struct pinctrl_dev *pctldev, diff --git a/include/linux/pinctrl/pinmux.h b/include/linux/pinctrl/pinmux.h index 47e9237edd47..dd7bef61d066 100644 --- a/include/linux/pinctrl/pinmux.h +++ b/include/linux/pinctrl/pinmux.h @@ -29,9 +29,8 @@ struct pinctrl_dev; * is allowed to answer "no" by returning a negative error code * @free: the reverse function of the request() callback, frees a pin after * being requested - * @list_functions: list the number of selectable named functions available - * in this pinmux driver, the core will begin on 0 and call this - * repeatedly as long as it returns >= 0 to enumerate mux settings + * @get_functions_count: returns number of selectable named functions available + * in this pinmux driver * @get_function_name: return the function name of the muxing selector, * called by the core to figure out which mux setting it shall map a * certain device to @@ -62,7 +61,7 @@ struct pinctrl_dev; struct pinmux_ops { int (*request) (struct pinctrl_dev *pctldev, unsigned offset); int (*free) (struct pinctrl_dev *pctldev, unsigned offset); - int (*list_functions) (struct pinctrl_dev *pctldev, unsigned selector); + int (*get_functions_count) (struct pinctrl_dev *pctldev); const char *(*get_function_name) (struct pinctrl_dev *pctldev, unsigned selector); int (*get_function_groups) (struct pinctrl_dev *pctldev, -- cgit v1.2.3 From a1d31f71e6ed2f714830df8885ec07dfe1f6632e Mon Sep 17 00:00:00 2001 From: Dong Aisheng Date: Fri, 6 Apr 2012 20:18:09 +0800 Subject: pinctrl: fix pinmux_check_ops error checking Do not use get_functions_count before checking. Acked-by: Stephen Warren Signed-off-by: Dong Aisheng Signed-off-by: Linus Walleij --- drivers/pinctrl/pinmux.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/pinctrl/pinmux.c b/drivers/pinctrl/pinmux.c index 375b214780e9..8849830e5190 100644 --- a/drivers/pinctrl/pinmux.c +++ b/drivers/pinctrl/pinmux.c @@ -33,11 +33,12 @@ int pinmux_check_ops(struct pinctrl_dev *pctldev) { const struct pinmux_ops *ops = pctldev->desc->pmxops; - unsigned nfuncs = ops->get_functions_count(pctldev); + unsigned nfuncs; unsigned selector = 0; /* Check that we implement required operations */ - if (!ops->get_functions_count || + if (!ops || + !ops->get_functions_count || !ops->get_function_name || !ops->get_function_groups || !ops->enable || @@ -45,11 +46,12 @@ int pinmux_check_ops(struct pinctrl_dev *pctldev) return -EINVAL; /* Check that all functions registered have names */ + nfuncs = ops->get_functions_count(pctldev); while (selector < nfuncs) { const char *fname = ops->get_function_name(pctldev, selector); if (!fname) { - pr_err("pinmux ops has no name for function%u\n", + dev_err(pctldev->dev, "pinmux ops has no name for function%u\n", selector); return -EINVAL; } -- cgit v1.2.3 From ad8bb720c23a80233e45ed31d67458f5e5b7ab31 Mon Sep 17 00:00:00 2001 From: Dong Aisheng Date: Tue, 10 Apr 2012 12:41:34 +0800 Subject: pinctrl: add some error checking for user interfaces This patch can avoid kernel oops in case the mux or config function is not supported by driver. Acked-by: Stephen Warren Signed-off-by: Dong Aisheng Signed-off-by: Linus Walleij --- drivers/pinctrl/pinconf.c | 4 ++++ drivers/pinctrl/pinmux.c | 15 +++++++++++++-- 2 files changed, 17 insertions(+), 2 deletions(-) diff --git a/drivers/pinctrl/pinconf.c b/drivers/pinctrl/pinconf.c index eb3a14f4b866..384dcc166e44 100644 --- a/drivers/pinctrl/pinconf.c +++ b/drivers/pinctrl/pinconf.c @@ -448,8 +448,12 @@ static void pinconf_dump_pin(struct pinctrl_dev *pctldev, static int pinconf_pins_show(struct seq_file *s, void *what) { struct pinctrl_dev *pctldev = s->private; + const struct pinconf_ops *ops = pctldev->desc->confops; unsigned i, pin; + if (!ops || !ops->pin_config_get) + return 0; + seq_puts(s, "Pin config settings per pin\n"); seq_puts(s, "Format: pin (name): pinmux setting array\n"); diff --git a/drivers/pinctrl/pinmux.c b/drivers/pinctrl/pinmux.c index 8849830e5190..c494c37bf167 100644 --- a/drivers/pinctrl/pinmux.c +++ b/drivers/pinctrl/pinmux.c @@ -323,6 +323,11 @@ int pinmux_map_to_setting(struct pinctrl_map const *map, const unsigned *pins; unsigned num_pins; + if (!pmxops) { + dev_err(pctldev->dev, "does not support mux function\n"); + return -EINVAL; + } + setting->data.mux.func = pinmux_func_name_to_selector(pctldev, map->data.mux.function); if (setting->data.mux.func < 0) @@ -481,11 +486,14 @@ static int pinmux_functions_show(struct seq_file *s, void *what) { struct pinctrl_dev *pctldev = s->private; const struct pinmux_ops *pmxops = pctldev->desc->pmxops; - unsigned nfuncs = pmxops->get_functions_count(pctldev); + unsigned nfuncs; unsigned func_selector = 0; - mutex_lock(&pinctrl_mutex); + if (!pmxops) + return 0; + mutex_lock(&pinctrl_mutex); + nfuncs = pmxops->get_functions_count(pctldev); while (func_selector < nfuncs) { const char *func = pmxops->get_function_name(pctldev, func_selector); @@ -520,6 +528,9 @@ static int pinmux_pins_show(struct seq_file *s, void *what) const struct pinmux_ops *pmxops = pctldev->desc->pmxops; unsigned i, pin; + if (!pmxops) + return 0; + seq_puts(s, "Pinmux settings per pin\n"); seq_puts(s, "Format: pin (name): mux_owner gpio_owner hog?\n"); -- cgit v1.2.3 From c05127c4e2c6e7d9949347a76fd05c337bcd5e84 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Tue, 10 Apr 2012 10:00:38 +0200 Subject: pinctrl: implement pinctrl deferred probing If drivers try to obtain pinctrl handles for a pin controller that has not yet registered to the subsystem, we need to be able to back out and retry with deferred probing. So let's return -EPROBE_DEFER whenever this location fails. Also downgrade the errors to info, maybe we will even set them to debug once the deferred probing is commonplace. Cc: Arnd Bergmann Reviewed-by: Mark Brown Acked-by: Stephen Warren Signed-off-by: Linus Walleij --- Documentation/pinctrl.txt | 5 +++++ drivers/pinctrl/core.c | 9 ++++++--- drivers/pinctrl/devicetree.c | 6 +++--- 3 files changed, 14 insertions(+), 6 deletions(-) diff --git a/Documentation/pinctrl.txt b/Documentation/pinctrl.txt index eb46b1c0b07a..4431c3e727ba 100644 --- a/Documentation/pinctrl.txt +++ b/Documentation/pinctrl.txt @@ -1043,6 +1043,11 @@ quickly poking some registers. The pins are allocated for your device when you issue the pinctrl_get() call, after this you should be able to see this in the debugfs listing of all pins. +NOTE: the pinctrl system will return -EPROBE_DEFER if it cannot find the +requested pinctrl handles, for example if the pinctrl driver has not yet +registered. Thus make sure that the error path in your driver gracefully +cleans up and is ready to retry the probing later in the startup process. + System pin control hogging ========================== diff --git a/drivers/pinctrl/core.c b/drivers/pinctrl/core.c index 7ff869007ba4..59027ab8347a 100644 --- a/drivers/pinctrl/core.c +++ b/drivers/pinctrl/core.c @@ -518,11 +518,14 @@ static int add_setting(struct pinctrl *p, struct pinctrl_map const *map) setting->pctldev = get_pinctrl_dev_from_devname(map->ctrl_dev_name); if (setting->pctldev == NULL) { - dev_err(p->dev, "unknown pinctrl device %s in map entry", + dev_info(p->dev, "unknown pinctrl device %s in map entry, deferring probe", map->ctrl_dev_name); kfree(setting); - /* Eventually, this should trigger deferred probe */ - return -ENODEV; + /* + * OK let us guess that the driver is not there yet, and + * let's defer obtaining this pinctrl handle to later... + */ + return -EPROBE_DEFER; } switch (map->type) { diff --git a/drivers/pinctrl/devicetree.c b/drivers/pinctrl/devicetree.c index 5ef2feb44395..fcb1de45473c 100644 --- a/drivers/pinctrl/devicetree.c +++ b/drivers/pinctrl/devicetree.c @@ -121,11 +121,11 @@ static int dt_to_map_one_config(struct pinctrl *p, const char *statename, for (;;) { np_pctldev = of_get_next_parent(np_pctldev); if (!np_pctldev || of_node_is_root(np_pctldev)) { - dev_err(p->dev, "could not find pctldev for node %s\n", + dev_info(p->dev, "could not find pctldev for node %s, deferring probe\n", np_config->full_name); of_node_put(np_pctldev); - /* FIXME: This should trigger deferrered probe */ - return -ENODEV; + /* OK let's just assume this will appear later then */ + return -EPROBE_DEFER; } pctldev = find_pinctrl_by_of_node(np_pctldev); if (pctldev) -- cgit v1.2.3 From c541adc637066407d4cda9db14dcb0e618966a4c Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Wed, 4 Apr 2012 09:27:46 -0600 Subject: dt: add property iteration helpers This patch adds macros of_property_for_each_u32() and of_property_for_each_string(), which iterate over an array of values within a device-tree property. Usage is for example: struct property *prop; const __be32 *p; u32 u; of_property_for_each_u32(np, "propname", prop, p, u) printk("U32 value: %x\n", u); struct property *prop; const char *s; of_property_for_each_string(np, "propname", prop, s) printk("String value: %s\n", s); Based on work by Rob Herring Cc: Grant Likely Signed-off-by: Stephen Warren Acked-by: Rob Herring Signed-off-by: Linus Walleij --- drivers/of/base.c | 41 +++++++++++++++++++++++++++++++++++++++++ include/linux/of.h | 35 +++++++++++++++++++++++++++++++++++ 2 files changed, 76 insertions(+) diff --git a/drivers/of/base.c b/drivers/of/base.c index 580644986945..d9bfd49b1935 100644 --- a/drivers/of/base.c +++ b/drivers/of/base.c @@ -1260,3 +1260,44 @@ int of_alias_get_id(struct device_node *np, const char *stem) return id; } EXPORT_SYMBOL_GPL(of_alias_get_id); + +const __be32 *of_prop_next_u32(struct property *prop, const __be32 *cur, + u32 *pu) +{ + const void *curv = cur; + + if (!prop) + return NULL; + + if (!cur) { + curv = prop->value; + goto out_val; + } + + curv += sizeof(*cur); + if (curv >= prop->value + prop->length) + return NULL; + +out_val: + *pu = be32_to_cpup(curv); + return curv; +} +EXPORT_SYMBOL_GPL(of_prop_next_u32); + +const char *of_prop_next_string(struct property *prop, const char *cur) +{ + const void *curv = cur; + + if (!prop) + return NULL; + + if (!cur) + return prop->value; + + curv += strlen(cur) + 1; + if (curv >= prop->value + prop->length) + return NULL; + + return curv; +} +EXPORT_SYMBOL_GPL(of_prop_next_string); diff --git a/include/linux/of.h b/include/linux/of.h index fa7fb1d97458..e3f942d9da89 100644 --- a/include/linux/of.h +++ b/include/linux/of.h @@ -259,6 +259,37 @@ extern void of_detach_node(struct device_node *); #endif #define of_match_ptr(_ptr) (_ptr) + +/* + * struct property *prop; + * const __be32 *p; + * u32 u; + * + * of_property_for_each_u32(np, "propname", prop, p, u) + * printk("U32 value: %x\n", u); + */ +const __be32 *of_prop_next_u32(struct property *prop, const __be32 *cur, + u32 *pu); +#define of_property_for_each_u32(np, propname, prop, p, u) \ + for (prop = of_find_property(np, propname, NULL), \ + p = of_prop_next_u32(prop, NULL, &u); \ + p; \ + p = of_prop_next_u32(prop, p, &u)) + +/* + * struct property *prop; + * const char *s; + * + * of_property_for_each_string(np, "propname", prop, s) + * printk("String value: %s\n", s); + */ +const char *of_prop_next_string(struct property *prop, const char *cur); +#define of_property_for_each_string(np, propname, prop, s) \ + for (prop = of_find_property(np, propname, NULL), \ + s = of_prop_next_string(prop, NULL); \ + s; \ + s = of_prop_next_string(prop, s)) + #else /* CONFIG_OF */ static inline bool of_have_populated_dt(void) @@ -349,6 +380,10 @@ static inline int of_machine_is_compatible(const char *compat) #define of_match_ptr(_ptr) NULL #define of_match_node(_matches, _node) NULL +#define of_property_for_each_u32(np, propname, prop, p, u) \ + while (0) +#define of_property_for_each_string(np, propname, prop, s) \ + while (0) #endif /* CONFIG_OF */ /** -- cgit v1.2.3 From 7a865277fb0f9da9e456dfc11b0a564cbfc475cd Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Wed, 4 Apr 2012 09:27:47 -0600 Subject: dt: pinctrl: Document device tree binding The core pin controller bindings define: * The fact that pin controllers expose pin configurations as nodes in device tree. * That the bindings for those pin configuration nodes is defined by the individual pin controller drivers. * A standardized set of properties for client devices to define numbered or named pin configuration states, each referring to some number of the afore-mentioned pin configuration nodes. * That the bindings for the client devices determines the set of numbered or named states that must exist. Signed-off-by: Stephen Warren Acked-by: Shawn Guo Acked-by: Tony Lindgren Acked-by: Linus Walleij Acked-by: Simon Glass Acked-by: Dong Aisheng Signed-off-by: Linus Walleij --- .../bindings/pinctrl/pinctrl-bindings.txt | 128 +++++++++++++++++++++ 1 file changed, 128 insertions(+) create mode 100644 Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt new file mode 100644 index 000000000000..c95ea8278f87 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt @@ -0,0 +1,128 @@ +== Introduction == + +Hardware modules that control pin multiplexing or configuration parameters +such as pull-up/down, tri-state, drive-strength etc are designated as pin +controllers. Each pin controller must be represented as a node in device tree, +just like any other hardware module. + +Hardware modules whose signals are affected by pin configuration are +designated client devices. Again, each client device must be represented as a +node in device tree, just like any other hardware module. + +For a client device to operate correctly, certain pin controllers must +set up certain specific pin configurations. Some client devices need a +single static pin configuration, e.g. set up during initialization. Others +need to reconfigure pins at run-time, for example to tri-state pins when the +device is inactive. Hence, each client device can define a set of named +states. The number and names of those states is defined by the client device's +own binding. + +The common pinctrl bindings defined in this file provide an infrastructure +for client device device tree nodes to map those state names to the pin +configuration used by those states. + +Note that pin controllers themselves may also be client devices of themselves. +For example, a pin controller may set up its own "active" state when the +driver loads. This would allow representing a board's static pin configuration +in a single place, rather than splitting it across multiple client device +nodes. The decision to do this or not somewhat rests with the author of +individual board device tree files, and any requirements imposed by the +bindings for the individual client devices in use by that board, i.e. whether +they require certain specific named states for dynamic pin configuration. + +== Pinctrl client devices == + +For each client device individually, every pin state is assigned an integer +ID. These numbers start at 0, and are contiguous. For each state ID, a unique +property exists to define the pin configuration. Each state may also be +assigned a name. When names are used, another property exists to map from +those names to the integer IDs. + +Each client device's own binding determines the set of states the must be +defined in its device tree node, and whether to define the set of state +IDs that must be provided, or whether to define the set of state names that +must be provided. + +Required properties: +pinctrl-0: List of phandles, each pointing at a pin configuration + node. These referenced pin configuration nodes must be child + nodes of the pin controller that they configure. Multiple + entries may exist in this list so that multiple pin + controllers may be configured, or so that a state may be built + from multiple nodes for a single pin controller, each + contributing part of the overall configuration. See the next + section of this document for details of the format of these + pin configuration nodes. + + In some cases, it may be useful to define a state, but for it + to be empty. This may be required when a common IP block is + used in an SoC either without a pin controller, or where the + pin controller does not affect the HW module in question. If + the binding for that IP block requires certain pin states to + exist, they must still be defined, but may be left empty. + +Optional properties: +pinctrl-1: List of phandles, each pointing at a pin configuration + node within a pin controller. +... +pinctrl-n: List of phandles, each pointing at a pin configuration + node within a pin controller. +pinctrl-names: The list of names to assign states. List entry 0 defines the + name for integer state ID 0, list entry 1 for state ID 1, and + so on. + +For example: + + /* For a client device requiring named states */ + device { + pinctrl-names = "active", "idle"; + pinctrl-0 = <&state_0_node_a>; + pinctrl-1 = <&state_1_node_a &state_1_node_b>; + }; + + /* For the same device if using state IDs */ + device { + pinctrl-0 = <&state_0_node_a>; + pinctrl-1 = <&state_1_node_a &state_1_node_b>; + }; + + /* + * For an IP block whose binding supports pin configuration, + * but in use on an SoC that doesn't have any pin control hardware + */ + device { + pinctrl-names = "active", "idle"; + pinctrl-0 = <>; + pinctrl-1 = <>; + }; + +== Pin controller devices == + +Pin controller devices should contain the pin configuration nodes that client +devices reference. + +For example: + + pincontroller { + ... /* Standard DT properties for the device itself elided */ + + state_0_node_a { + ... + }; + state_1_node_a { + ... + }; + state_1_node_b { + ... + }; + } + +The contents of each of those pin configuration child nodes is defined +entirely by the binding for the individual pin controller device. There +exists no common standard for this content. + +The pin configuration nodes need not be direct children of the pin controller +device; they may be grandchildren, for example. Whether this is legal, and +whether there is any interaction between the child and intermediate parent +nodes, is again defined entirely by the binding for the individual pin +controller device. -- cgit v1.2.3 From e3f80045e8856cb789f0938b61c263249f420ff3 Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Wed, 4 Apr 2012 09:27:48 -0600 Subject: dt: Move Tegra20 pin mux binding into new pinctrl directory This places the file in the new location for all pin controller bindings. Also, rename the file using the full compatible value for easier avoidance of conflicts between multiple bindings. Signed-off-by: Stephen Warren Signed-off-by: Linus Walleij --- Documentation/devicetree/bindings/pinctrl/nvidia,tegra20-pinmux.txt | 5 +++++ Documentation/devicetree/bindings/pinmux/pinmux_nvidia.txt | 5 ----- 2 files changed, 5 insertions(+), 5 deletions(-) create mode 100644 Documentation/devicetree/bindings/pinctrl/nvidia,tegra20-pinmux.txt delete mode 100644 Documentation/devicetree/bindings/pinmux/pinmux_nvidia.txt diff --git a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra20-pinmux.txt b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra20-pinmux.txt new file mode 100644 index 000000000000..36f82dbdd14d --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra20-pinmux.txt @@ -0,0 +1,5 @@ +NVIDIA Tegra 2 pinmux controller + +Required properties: +- compatible : "nvidia,tegra20-pinmux" + diff --git a/Documentation/devicetree/bindings/pinmux/pinmux_nvidia.txt b/Documentation/devicetree/bindings/pinmux/pinmux_nvidia.txt deleted file mode 100644 index 36f82dbdd14d..000000000000 --- a/Documentation/devicetree/bindings/pinmux/pinmux_nvidia.txt +++ /dev/null @@ -1,5 +0,0 @@ -NVIDIA Tegra 2 pinmux controller - -Required properties: -- compatible : "nvidia,tegra20-pinmux" - -- cgit v1.2.3 From a3c9454e530d51fad49bbc57e19d50a30f94ce14 Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Wed, 4 Apr 2012 09:27:49 -0600 Subject: dt: Document Tegra20/30 pinctrl binding Define a new binding for the Tegra pin controller, which is capable of defining all aspects of desired pin multiplexing and pin configuration. This is all based on the new common pinctrl bindings. Add Tegra30 binding based on Tegra20 binding. Add some basic stuff that was missing before: * How many and what reg property entries must be provided. * An example. Signed-off-by: Stephen Warren Acked-by: Dong Aisheng Signed-off-by: Linus Walleij --- .../bindings/pinctrl/nvidia,tegra20-pinmux.txt | 131 +++++++++++++++++++- .../bindings/pinctrl/nvidia,tegra30-pinmux.txt | 132 +++++++++++++++++++++ 2 files changed, 261 insertions(+), 2 deletions(-) create mode 100644 Documentation/devicetree/bindings/pinctrl/nvidia,tegra30-pinmux.txt diff --git a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra20-pinmux.txt b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra20-pinmux.txt index 36f82dbdd14d..c8e578263ce2 100644 --- a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra20-pinmux.txt +++ b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra20-pinmux.txt @@ -1,5 +1,132 @@ -NVIDIA Tegra 2 pinmux controller +NVIDIA Tegra20 pinmux controller Required properties: -- compatible : "nvidia,tegra20-pinmux" +- compatible: "nvidia,tegra20-pinmux" +- reg: Should contain the register physical address and length for each of + the tri-state, mux, pull-up/down, and pad control register sets. +Please refer to pinctrl-bindings.txt in this directory for details of the +common pinctrl bindings used by client devices, including the meaning of the +phrase "pin configuration node". + +Tegra's pin configuration nodes act as a container for an abitrary number of +subnodes. Each of these subnodes represents some desired configuration for a +pin, a group, or a list of pins or groups. This configuration can include the +mux function to select on those pin(s)/group(s), and various pin configuration +parameters, such as pull-up, tristate, drive strength, etc. + +The name of each subnode is not important; all subnodes should be enumerated +and processed purely based on their content. + +Each subnode only affects those parameters that are explicitly listed. In +other words, a subnode that lists a mux function but no pin configuration +parameters implies no information about any pin configuration parameters. +Similarly, a pin subnode that describes a pullup parameter implies no +information about e.g. the mux function or tristate parameter. For this +reason, even seemingly boolean values are actually tristates in this binding: +unspecified, off, or on. Unspecified is represented as an absent property, +and off/on are represented as integer values 0 and 1. + +Required subnode-properties: +- nvidia,pins : An array of strings. Each string contains the name of a pin or + group. Valid values for these names are listed below. + +Optional subnode-properties: +- nvidia,function: A string containing the name of the function to mux to the + pin or group. Valid values for function names are listed below. See the Tegra + TRM to determine which are valid for each pin or group. +- nvidia,pull: Integer, representing the pull-down/up to apply to the pin. + 0: none, 1: down, 2: up. +- nvidia,tristate: Integer. + 0: drive, 1: tristate. +- nvidia,high-speed-mode: Integer. Enable high speed mode the pins. + 0: no, 1: yes. +- nvidia,schmitt: Integer. Enables Schmitt Trigger on the input. + 0: no, 1: yes. +- nvidia,low-power-mode: Integer. Valid values 0-3. 0 is least power, 3 is + most power. Controls the drive power or current. See "Low Power Mode" + or "LPMD1" and "LPMD0" in the Tegra TRM. +- nvidia,pull-down-strength: Integer. Controls drive strength. 0 is weakest. + The range of valid values depends on the pingroup. See "CAL_DRVDN" in the + Tegra TRM. +- nvidia,pull-up-strength: Integer. Controls drive strength. 0 is weakest. + The range of valid values depends on the pingroup. See "CAL_DRVUP" in the + Tegra TRM. +- nvidia,slew-rate-rising: Integer. Controls rising signal slew rate. 0 is + fastest. The range of valid values depends on the pingroup. See + "DRVDN_SLWR" in the Tegra TRM. +- nvidia,slew-rate-falling: Integer. Controls falling signal slew rate. 0 is + fastest. The range of valid values depends on the pingroup. See + "DRVUP_SLWF" in the Tegra TRM. + +Note that many of these properties are only valid for certain specific pins +or groups. See the Tegra TRM and various pinmux spreadsheets for complete +details regarding which groups support which functionality. The Linux pinctrl +driver may also be a useful reference, since it consolidates, disambiguates, +and corrects data from all those sources. + +Valid values for pin and group names are: + + mux groups: + + These all support nvidia,function, nvidia,tristate, and many support + nvidia,pull. + + ata, atb, atc, atd, ate, cdev1, cdev2, crtp, csus, dap1, dap2, dap3, dap4, + ddc, dta, dtb, dtc, dtd, dte, dtf, gma, gmb, gmc, gmd, gme, gpu, gpu7, + gpv, hdint, i2cp, irrx, irtx, kbca, kbcb, kbcc, kbcd, kbce, kbcf, lcsn, + ld0, ld1, ld2, ld3, ld4, ld5, ld6, ld7, ld8, ld9, ld10, ld11, ld12, ld13, + ld14, ld15, ld16, ld17, ldc, ldi, lhp0, lhp1, lhp2, lhs, lm0, lm1, lpp, + lpw0, lpw1, lpw2, lsc0, lsc1, lsck, lsda, lsdi, lspi, lvp0, lvp1, lvs, + owc, pmc, pta, rm, sdb, sdc, sdd, sdio1, slxa, slxc, slxd, slxk, spdi, + spdo, spia, spib, spic, spid, spie, spif, spig, spih, uaa, uab, uac, uad, + uca, ucb, uda. + + tristate groups: + + These only support nvidia,pull. + + ck32, ddrc, pmca, pmcb, pmcc, pmcd, pmce, xm2c, xm2d, ls, lc, ld17_0, + ld19_18, ld21_20, ld23_22. + + drive groups: + + With some exceptions, these support nvidia,high-speed-mode, + nvidia,schmitt, nvidia,low-power-mode, nvidia,pull-down-strength, + nvidia,pull-up-strength, nvidia,slew_rate-rising, nvidia,slew_rate-falling. + + drive_ao1, drive_ao2, drive_at1, drive_at2, drive_cdev1, drive_cdev2, + drive_csus, drive_dap1, drive_dap2, drive_dap3, drive_dap4, drive_dbg, + drive_lcd1, drive_lcd2, drive_sdmmc2, drive_sdmmc3, drive_spi, drive_uaa, + drive_uab, drive_uart2, drive_uart3, drive_vi1, drive_vi2, drive_xm2a, + drive_xm2c, drive_xm2d, drive_xm2clk, drive_sdio1, drive_crt, drive_ddc, + drive_gma, drive_gmb, drive_gmc, drive_gmd, drive_gme, drive_owr, + drive_uda. + +Example: + + pinctrl@70000000 { + compatible = "nvidia,tegra20-pinmux"; + reg = < 0x70000014 0x10 /* Tri-state registers */ + 0x70000080 0x20 /* Mux registers */ + 0x700000a0 0x14 /* Pull-up/down registers */ + 0x70000868 0xa8 >; /* Pad control registers */ + }; + +Example board file extract: + + pinctrl@70000000 { + sdio4_default: sdio4_default { + atb { + nvidia,pins = "atb", "gma", "gme"; + nvidia,function = "sdio4"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + }; + }; + }; + + sdhci@c8000600 { + pinctrl-names = "default"; + pinctrl-0 = <&sdio4_default>; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra30-pinmux.txt b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra30-pinmux.txt new file mode 100644 index 000000000000..c275b70349c1 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra30-pinmux.txt @@ -0,0 +1,132 @@ +NVIDIA Tegra30 pinmux controller + +The Tegra30 pinctrl binding is very similar to the Tegra20 pinctrl binding, +as described in nvidia,tegra20-pinmux.txt. In fact, this document assumes +that binding as a baseline, and only documents the differences between the +two bindings. + +Required properties: +- compatible: "nvidia,tegra30-pinmux" +- reg: Should contain the register physical address and length for each of + the pad control and mux registers. + +Tegra30 adds the following optional properties for pin configuration subnodes: +- nvidia,enable-input: Integer. Enable the pin's input path. 0: no, 1: yes. +- nvidia,open-drain: Integer. Enable open drain mode. 0: no, 1: yes. +- nvidia,lock: Integer. Lock the pin configuration against further changes + until reset. 0: no, 1: yes. +- nvidia,io-reset: Integer. Reset the IO path. 0: no, 1: yes. + +As with Tegra20, see the Tegra TRM for complete details regarding which groups +support which functionality. + +Valid values for pin and group names are: + + per-pin mux groups: + + These all support nvidia,function, nvidia,tristate, nvidia,pull, + nvidia,enable-input, nvidia,lock. Some support nvidia,open-drain, + nvidia,io-reset. + + clk_32k_out_pa0, uart3_cts_n_pa1, dap2_fs_pa2, dap2_sclk_pa3, + dap2_din_pa4, dap2_dout_pa5, sdmmc3_clk_pa6, sdmmc3_cmd_pa7, gmi_a17_pb0, + gmi_a18_pb1, lcd_pwr0_pb2, lcd_pclk_pb3, sdmmc3_dat3_pb4, sdmmc3_dat2_pb5, + sdmmc3_dat1_pb6, sdmmc3_dat0_pb7, uart3_rts_n_pc0, lcd_pwr1_pc1, + uart2_txd_pc2, uart2_rxd_pc3, gen1_i2c_scl_pc4, gen1_i2c_sda_pc5, + lcd_pwr2_pc6, gmi_wp_n_pc7, sdmmc3_dat5_pd0, sdmmc3_dat4_pd1, lcd_dc1_pd2, + sdmmc3_dat6_pd3, sdmmc3_dat7_pd4, vi_d1_pd5, vi_vsync_pd6, vi_hsync_pd7, + lcd_d0_pe0, lcd_d1_pe1, lcd_d2_pe2, lcd_d3_pe3, lcd_d4_pe4, lcd_d5_pe5, + lcd_d6_pe6, lcd_d7_pe7, lcd_d8_pf0, lcd_d9_pf1, lcd_d10_pf2, lcd_d11_pf3, + lcd_d12_pf4, lcd_d13_pf5, lcd_d14_pf6, lcd_d15_pf7, gmi_ad0_pg0, + gmi_ad1_pg1, gmi_ad2_pg2, gmi_ad3_pg3, gmi_ad4_pg4, gmi_ad5_pg5, + gmi_ad6_pg6, gmi_ad7_pg7, gmi_ad8_ph0, gmi_ad9_ph1, gmi_ad10_ph2, + gmi_ad11_ph3, gmi_ad12_ph4, gmi_ad13_ph5, gmi_ad14_ph6, gmi_ad15_ph7, + gmi_wr_n_pi0, gmi_oe_n_pi1, gmi_dqs_pi2, gmi_cs6_n_pi3, gmi_rst_n_pi4, + gmi_iordy_pi5, gmi_cs7_n_pi6, gmi_wait_pi7, gmi_cs0_n_pj0, lcd_de_pj1, + gmi_cs1_n_pj2, lcd_hsync_pj3, lcd_vsync_pj4, uart2_cts_n_pj5, + uart2_rts_n_pj6, gmi_a16_pj7, gmi_adv_n_pk0, gmi_clk_pk1, gmi_cs4_n_pk2, + gmi_cs2_n_pk3, gmi_cs3_n_pk4, spdif_out_pk5, spdif_in_pk6, gmi_a19_pk7, + vi_d2_pl0, vi_d3_pl1, vi_d4_pl2, vi_d5_pl3, vi_d6_pl4, vi_d7_pl5, + vi_d8_pl6, vi_d9_pl7, lcd_d16_pm0, lcd_d17_pm1, lcd_d18_pm2, lcd_d19_pm3, + lcd_d20_pm4, lcd_d21_pm5, lcd_d22_pm6, lcd_d23_pm7, dap1_fs_pn0, + dap1_din_pn1, dap1_dout_pn2, dap1_sclk_pn3, lcd_cs0_n_pn4, lcd_sdout_pn5, + lcd_dc0_pn6, hdmi_int_pn7, ulpi_data7_po0, ulpi_data0_po1, ulpi_data1_po2, + ulpi_data2_po3, ulpi_data3_po4, ulpi_data4_po5, ulpi_data5_po6, + ulpi_data6_po7, dap3_fs_pp0, dap3_din_pp1, dap3_dout_pp2, dap3_sclk_pp3, + dap4_fs_pp4, dap4_din_pp5, dap4_dout_pp6, dap4_sclk_pp7, kb_col0_pq0, + kb_col1_pq1, kb_col2_pq2, kb_col3_pq3, kb_col4_pq4, kb_col5_pq5, + kb_col6_pq6, kb_col7_pq7, kb_row0_pr0, kb_row1_pr1, kb_row2_pr2, + kb_row3_pr3, kb_row4_pr4, kb_row5_pr5, kb_row6_pr6, kb_row7_pr7, + kb_row8_ps0, kb_row9_ps1, kb_row10_ps2, kb_row11_ps3, kb_row12_ps4, + kb_row13_ps5, kb_row14_ps6, kb_row15_ps7, vi_pclk_pt0, vi_mclk_pt1, + vi_d10_pt2, vi_d11_pt3, vi_d0_pt4, gen2_i2c_scl_pt5, gen2_i2c_sda_pt6, + sdmmc4_cmd_pt7, pu0, pu1, pu2, pu3, pu4, pu5, pu6, jtag_rtck_pu7, pv0, + pv1, pv2, pv3, ddc_scl_pv4, ddc_sda_pv5, crt_hsync_pv6, crt_vsync_pv7, + lcd_cs1_n_pw0, lcd_m1_pw1, spi2_cs1_n_pw2, spi2_cs2_n_pw3, clk1_out_pw4, + clk2_out_pw5, uart3_txd_pw6, uart3_rxd_pw7, spi2_mosi_px0, spi2_miso_px1, + spi2_sck_px2, spi2_cs0_n_px3, spi1_mosi_px4, spi1_sck_px5, spi1_cs0_n_px6, + spi1_miso_px7, ulpi_clk_py0, ulpi_dir_py1, ulpi_nxt_py2, ulpi_stp_py3, + sdmmc1_dat3_py4, sdmmc1_dat2_py5, sdmmc1_dat1_py6, sdmmc1_dat0_py7, + sdmmc1_clk_pz0, sdmmc1_cmd_pz1, lcd_sdin_pz2, lcd_wr_n_pz3, lcd_sck_pz4, + sys_clk_req_pz5, pwr_i2c_scl_pz6, pwr_i2c_sda_pz7, sdmmc4_dat0_paa0, + sdmmc4_dat1_paa1, sdmmc4_dat2_paa2, sdmmc4_dat3_paa3, sdmmc4_dat4_paa4, + sdmmc4_dat5_paa5, sdmmc4_dat6_paa6, sdmmc4_dat7_paa7, pbb0, + cam_i2c_scl_pbb1, cam_i2c_sda_pbb2, pbb3, pbb4, pbb5, pbb6, pbb7, + cam_mclk_pcc0, pcc1, pcc2, sdmmc4_rst_n_pcc3, sdmmc4_clk_pcc4, + clk2_req_pcc5, pex_l2_rst_n_pcc6, pex_l2_clkreq_n_pcc7, + pex_l0_prsnt_n_pdd0, pex_l0_rst_n_pdd1, pex_l0_clkreq_n_pdd2, + pex_wake_n_pdd3, pex_l1_prsnt_n_pdd4, pex_l1_rst_n_pdd5, + pex_l1_clkreq_n_pdd6, pex_l2_prsnt_n_pdd7, clk3_out_pee0, clk3_req_pee1, + clk1_req_pee2, hdmi_cec_pee3, clk_32k_in, core_pwr_req, cpu_pwr_req, owr, + pwr_int_n. + + drive groups: + + These all support nvidia,pull-down-strength, nvidia,pull-up-strength, + nvidia,slew_rate-rising, nvidia,slew_rate-falling. Most but not all + support nvidia,high-speed-mode, nvidia,schmitt, nvidia,low-power-mode. + + ao1, ao2, at1, at2, at3, at4, at5, cdev1, cdev2, cec, crt, csus, dap1, + dap2, dap3, dap4, dbg, ddc, dev3, gma, gmb, gmc, gmd, gme, gmf, gmg, + gmh, gpv, lcd1, lcd2, owr, sdio1, sdio2, sdio3, spi, uaa, uab, uart2, + uart3, uda, vi1. + +Example: + + pinctrl@70000000 { + compatible = "nvidia,tegra30-pinmux"; + reg = < 0x70000868 0xd0 /* Pad control registers */ + 0x70003000 0x3e0 >; /* Mux registers */ + }; + +Example board file extract: + + pinctrl@70000000 { + sdmmc4_default: pinmux { + sdmmc4_clk_pcc4 { + nvidia,pins = "sdmmc4_clk_pcc4", + "sdmmc4_rst_n_pcc3"; + nvidia,function = "sdmmc4"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + }; + sdmmc4_dat0_paa0 { + nvidia,pins = "sdmmc4_dat0_paa0", + "sdmmc4_dat1_paa1", + "sdmmc4_dat2_paa2", + "sdmmc4_dat3_paa3", + "sdmmc4_dat4_paa4", + "sdmmc4_dat5_paa5", + "sdmmc4_dat6_paa6", + "sdmmc4_dat7_paa7"; + nvidia,function = "sdmmc4"; + nvidia,pull = <2>; + nvidia,tristate = <0>; + }; + }; + }; + + sdhci@78000400 { + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc4_default>; + }; -- cgit v1.2.3 From 60f7f5003d69b92558e9fc0789339f2b1d41f78d Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Wed, 4 Apr 2012 09:27:50 -0600 Subject: pinctrl: tegra: Add complete device tree support Implement pinctrl_ops dt_node_to_map() and dt_free_map(). These allow complete specification of the desired pinmux configuration using device tree. Signed-off-by: Stephen Warren Acked-by: Dong Aisheng Signed-off-by: Linus Walleij --- drivers/pinctrl/pinctrl-tegra.c | 205 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 205 insertions(+) diff --git a/drivers/pinctrl/pinctrl-tegra.c b/drivers/pinctrl/pinctrl-tegra.c index 41311a2a4256..2c98fba01ca5 100644 --- a/drivers/pinctrl/pinctrl-tegra.c +++ b/drivers/pinctrl/pinctrl-tegra.c @@ -23,9 +23,11 @@ #include #include #include +#include #include #include #include +#include #include @@ -88,11 +90,214 @@ static void tegra_pinctrl_pin_dbg_show(struct pinctrl_dev *pctldev, seq_printf(s, " " DRIVER_NAME); } +static int reserve_map(struct pinctrl_map **map, unsigned *reserved_maps, + unsigned *num_maps, unsigned reserve) +{ + unsigned old_num = *reserved_maps; + unsigned new_num = *num_maps + reserve; + struct pinctrl_map *new_map; + + if (old_num >= new_num) + return 0; + + new_map = krealloc(*map, sizeof(*new_map) * new_num, GFP_KERNEL); + if (!new_map) + return -ENOMEM; + + memset(new_map + old_num, 0, (new_num - old_num) * sizeof(*new_map)); + + *map = new_map; + *reserved_maps = new_num; + + return 0; +} + +static int add_map_mux(struct pinctrl_map **map, unsigned *reserved_maps, + unsigned *num_maps, const char *group, + const char *function) +{ + if (*num_maps == *reserved_maps) + return -ENOSPC; + + (*map)[*num_maps].type = PIN_MAP_TYPE_MUX_GROUP; + (*map)[*num_maps].data.mux.group = group; + (*map)[*num_maps].data.mux.function = function; + (*num_maps)++; + + return 0; +} + +static int add_map_configs(struct pinctrl_map **map, unsigned *reserved_maps, + unsigned *num_maps, const char *group, + unsigned long *configs, unsigned num_configs) +{ + unsigned long *dup_configs; + + if (*num_maps == *reserved_maps) + return -ENOSPC; + + dup_configs = kmemdup(configs, num_configs * sizeof(*dup_configs), + GFP_KERNEL); + if (!dup_configs) + return -ENOMEM; + + (*map)[*num_maps].type = PIN_MAP_TYPE_CONFIGS_GROUP; + (*map)[*num_maps].data.configs.group_or_pin = group; + (*map)[*num_maps].data.configs.configs = dup_configs; + (*map)[*num_maps].data.configs.num_configs = num_configs; + (*num_maps)++; + + return 0; +} + +static int add_config(unsigned long **configs, unsigned *num_configs, + unsigned long config) +{ + unsigned old_num = *num_configs; + unsigned new_num = old_num + 1; + unsigned long *new_configs; + + new_configs = krealloc(*configs, sizeof(*new_configs) * new_num, + GFP_KERNEL); + if (!new_configs) + return -ENOMEM; + + new_configs[old_num] = config; + + *configs = new_configs; + *num_configs = new_num; + + return 0; +} + +void tegra_pinctrl_dt_free_map(struct pinctrl_dev *pctldev, + struct pinctrl_map *map, unsigned num_maps) +{ + int i; + + for (i = 0; i < num_maps; i++) + if (map[i].type == PIN_MAP_TYPE_CONFIGS_GROUP) + kfree(map[i].data.configs.configs); + + kfree(map); +} + +static const struct cfg_param { + const char *property; + enum tegra_pinconf_param param; +} cfg_params[] = { + {"nvidia,pull", TEGRA_PINCONF_PARAM_PULL}, + {"nvidia,tristate", TEGRA_PINCONF_PARAM_TRISTATE}, + {"nvidia,enable-input", TEGRA_PINCONF_PARAM_ENABLE_INPUT}, + {"nvidia,open-drain", TEGRA_PINCONF_PARAM_OPEN_DRAIN}, + {"nvidia,lock", TEGRA_PINCONF_PARAM_LOCK}, + {"nvidia,io-reset", TEGRA_PINCONF_PARAM_IORESET}, + {"nvidia,high-speed-mode", TEGRA_PINCONF_PARAM_HIGH_SPEED_MODE}, + {"nvidia,schmitt", TEGRA_PINCONF_PARAM_SCHMITT}, + {"nvidia,low-power-mode", TEGRA_PINCONF_PARAM_LOW_POWER_MODE}, + {"nvidia,pull-down-strength", TEGRA_PINCONF_PARAM_DRIVE_DOWN_STRENGTH}, + {"nvidia,pull-up-strength", TEGRA_PINCONF_PARAM_DRIVE_UP_STRENGTH}, + {"nvidia,slew-rate-falling", TEGRA_PINCONF_PARAM_SLEW_RATE_FALLING}, + {"nvidia,slew-rate-rising", TEGRA_PINCONF_PARAM_SLEW_RATE_RISING}, +}; + +int tegra_pinctrl_dt_subnode_to_map(struct device_node *np, + struct pinctrl_map **map, + unsigned *reserved_maps, + unsigned *num_maps) +{ + int ret, i; + const char *function; + u32 val; + unsigned long config; + unsigned long *configs = NULL; + unsigned num_configs = 0; + unsigned reserve; + struct property *prop; + const char *group; + + ret = of_property_read_string(np, "nvidia,function", &function); + if (ret < 0) + function = NULL; + + for (i = 0; i < ARRAY_SIZE(cfg_params); i++) { + ret = of_property_read_u32(np, cfg_params[i].property, &val); + if (!ret) { + config = TEGRA_PINCONF_PACK(cfg_params[i].param, val); + ret = add_config(&configs, &num_configs, config); + if (ret < 0) + goto exit; + } + } + + reserve = 0; + if (function != NULL) + reserve++; + if (num_configs) + reserve++; + ret = of_property_count_strings(np, "nvidia,pins"); + if (ret < 0) + goto exit; + reserve *= ret; + + ret = reserve_map(map, reserved_maps, num_maps, reserve); + if (ret < 0) + goto exit; + + of_property_for_each_string(np, "nvidia,pins", prop, group) { + if (function) { + ret = add_map_mux(map, reserved_maps, num_maps, + group, function); + if (ret < 0) + goto exit; + } + + if (num_configs) { + ret = add_map_configs(map, reserved_maps, num_maps, + group, configs, num_configs); + if (ret < 0) + goto exit; + } + } + + ret = 0; + +exit: + kfree(configs); + return ret; +} + +int tegra_pinctrl_dt_node_to_map(struct pinctrl_dev *pctldev, + struct device_node *np_config, + struct pinctrl_map **map, unsigned *num_maps) +{ + unsigned reserved_maps; + struct device_node *np; + int ret; + + reserved_maps = 0; + *map = NULL; + *num_maps = 0; + + for_each_child_of_node(np_config, np) { + ret = tegra_pinctrl_dt_subnode_to_map(np, map, &reserved_maps, + num_maps); + if (ret < 0) { + tegra_pinctrl_dt_free_map(pctldev, *map, *num_maps); + return ret; + } + } + + return 0; +} + static struct pinctrl_ops tegra_pinctrl_ops = { .get_groups_count = tegra_pinctrl_get_groups_count, .get_group_name = tegra_pinctrl_get_group_name, .get_group_pins = tegra_pinctrl_get_group_pins, .pin_dbg_show = tegra_pinctrl_pin_dbg_show, + .dt_node_to_map = tegra_pinctrl_dt_node_to_map, + .dt_free_map = tegra_pinctrl_dt_free_map, }; static int tegra_pinctrl_get_funcs_count(struct pinctrl_dev *pctldev) -- cgit v1.2.3 From 630e2d0494f001cc3c435cac374f92e4bde0f518 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Thu, 12 Apr 2012 19:48:42 +0200 Subject: pinctrl: mark non-EXPERIMENTAL With the finalization of the external driver API and the device tree support, this subsystem is now mature and can be promoted to non-experimental status. Acked-by: Stephen Warren Signed-off-by: Linus Walleij --- drivers/pinctrl/Kconfig | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig index abfb96408779..f73a5ea89754 100644 --- a/drivers/pinctrl/Kconfig +++ b/drivers/pinctrl/Kconfig @@ -4,7 +4,6 @@ config PINCTRL bool - depends on EXPERIMENTAL if PINCTRL -- cgit v1.2.3 From c736d73c9e6d9849ecb08c34c1d3917b210e8f38 Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Wed, 11 Apr 2012 16:45:45 -0600 Subject: pinctrl: ifdef CONFIG_DEBUG_FS cleanup Only provide prototypes for pin{mux,conf}.c debugfs-related functions when both CONFIG_PIN* /and/ CONFIG_DEBUG_FS are enabled, otherwise provide static inlines. Signed-off-by: Stephen Warren Signed-off-by: Linus Walleij --- drivers/pinctrl/pinconf.h | 17 ++++++++++++----- drivers/pinctrl/pinmux.h | 18 ++++++++++++------ 2 files changed, 24 insertions(+), 11 deletions(-) diff --git a/drivers/pinctrl/pinconf.h b/drivers/pinctrl/pinconf.h index 54510de5e8c6..32b8354d2510 100644 --- a/drivers/pinctrl/pinconf.h +++ b/drivers/pinctrl/pinconf.h @@ -19,11 +19,6 @@ int pinconf_map_to_setting(struct pinctrl_map const *map, struct pinctrl_setting *setting); void pinconf_free_setting(struct pinctrl_setting const *setting); int pinconf_apply_setting(struct pinctrl_setting const *setting); -void pinconf_show_map(struct seq_file *s, struct pinctrl_map const *map); -void pinconf_show_setting(struct seq_file *s, - struct pinctrl_setting const *setting); -void pinconf_init_device_debugfs(struct dentry *devroot, - struct pinctrl_dev *pctldev); /* * You will only be interested in these if you're using PINCONF @@ -61,6 +56,18 @@ static inline int pinconf_apply_setting(struct pinctrl_setting const *setting) return 0; } +#endif + +#if defined(CONFIG_PINMUX) && defined(CONFIG_DEBUG_FS) + +void pinconf_show_map(struct seq_file *s, struct pinctrl_map const *map); +void pinconf_show_setting(struct seq_file *s, + struct pinctrl_setting const *setting); +void pinconf_init_device_debugfs(struct dentry *devroot, + struct pinctrl_dev *pctldev); + +#else + static inline void pinconf_show_map(struct seq_file *s, struct pinctrl_map const *map) { diff --git a/drivers/pinctrl/pinmux.h b/drivers/pinctrl/pinmux.h index 6fc47003e95d..d1a98b1c9fce 100644 --- a/drivers/pinctrl/pinmux.h +++ b/drivers/pinctrl/pinmux.h @@ -31,12 +31,6 @@ void pinmux_free_setting(struct pinctrl_setting const *setting); int pinmux_enable_setting(struct pinctrl_setting const *setting); void pinmux_disable_setting(struct pinctrl_setting const *setting); -void pinmux_show_map(struct seq_file *s, struct pinctrl_map const *map); -void pinmux_show_setting(struct seq_file *s, - struct pinctrl_setting const *setting); -void pinmux_init_device_debugfs(struct dentry *devroot, - struct pinctrl_dev *pctldev); - #else static inline int pinmux_check_ops(struct pinctrl_dev *pctldev) @@ -89,6 +83,18 @@ static inline void pinmux_disable_setting( { } +#endif + +#if defined(CONFIG_PINMUX) && defined(CONFIG_DEBUG_FS) + +void pinmux_show_map(struct seq_file *s, struct pinctrl_map const *map); +void pinmux_show_setting(struct seq_file *s, + struct pinctrl_setting const *setting); +void pinmux_init_device_debugfs(struct dentry *devroot, + struct pinctrl_dev *pctldev); + +#else + static inline void pinmux_show_map(struct seq_file *s, struct pinctrl_map const *map) { -- cgit v1.2.3 From 6cb4158757a8629e14851e7802f3b6bfaa7d6f00 Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Fri, 13 Apr 2012 10:49:06 -0600 Subject: pinctrl: allow pctldevs to decode pin config in debugfs Add a pinconf op so that pin controller drivers can decode their pin config settings for debugfs. Signed-off-by: Stephen Warren Signed-off-by: Linus Walleij --- drivers/pinctrl/pinconf.c | 31 +++++++++++++++++++++++++++---- include/linux/pinctrl/pinconf.h | 5 +++++ 2 files changed, 32 insertions(+), 4 deletions(-) diff --git a/drivers/pinctrl/pinconf.c b/drivers/pinctrl/pinconf.c index 384dcc166e44..0133a69ad117 100644 --- a/drivers/pinctrl/pinconf.c +++ b/drivers/pinctrl/pinconf.c @@ -379,8 +379,16 @@ int pinconf_apply_setting(struct pinctrl_setting const *setting) void pinconf_show_map(struct seq_file *s, struct pinctrl_map const *map) { + struct pinctrl_dev *pctldev; + const struct pinconf_ops *confops; int i; + pctldev = get_pinctrl_dev_from_devname(map->ctrl_dev_name); + if (pctldev) + confops = pctldev->desc->confops; + else + confops = NULL; + switch (map->type) { case PIN_MAP_TYPE_CONFIGS_PIN: seq_printf(s, "pin "); @@ -394,8 +402,15 @@ void pinconf_show_map(struct seq_file *s, struct pinctrl_map const *map) seq_printf(s, "%s\n", map->data.configs.group_or_pin); - for (i = 0; i < map->data.configs.num_configs; i++) - seq_printf(s, "config %08lx\n", map->data.configs.configs[i]); + for (i = 0; i < map->data.configs.num_configs; i++) { + seq_printf(s, "config "); + if (confops && confops->pin_config_config_dbg_show) + confops->pin_config_config_dbg_show(pctldev, s, + map->data.configs.configs[i]); + else + seq_printf(s, "%08lx", map->data.configs.configs[i]); + seq_printf(s, "\n"); + } } void pinconf_show_setting(struct seq_file *s, @@ -403,6 +418,7 @@ void pinconf_show_setting(struct seq_file *s, { struct pinctrl_dev *pctldev = setting->pctldev; const struct pinctrl_ops *pctlops = pctldev->desc->pctlops; + const struct pinconf_ops *confops = pctldev->desc->confops; struct pin_desc *desc; int i; @@ -428,8 +444,15 @@ void pinconf_show_setting(struct seq_file *s, * FIXME: We should really get the pin controler to dump the config * values, so they can be decoded to something meaningful. */ - for (i = 0; i < setting->data.configs.num_configs; i++) - seq_printf(s, " %08lx", setting->data.configs.configs[i]); + for (i = 0; i < setting->data.configs.num_configs; i++) { + seq_printf(s, " "); + if (confops && confops->pin_config_config_dbg_show) + confops->pin_config_config_dbg_show(pctldev, s, + setting->data.configs.configs[i]); + else + seq_printf(s, "%08lx", + setting->data.configs.configs[i]); + } seq_printf(s, "\n"); } diff --git a/include/linux/pinctrl/pinconf.h b/include/linux/pinctrl/pinconf.h index ec431f03362d..7b9d5f00ed37 100644 --- a/include/linux/pinctrl/pinconf.h +++ b/include/linux/pinctrl/pinconf.h @@ -33,6 +33,8 @@ struct seq_file; * per-device info for a certain pin in debugfs * @pin_config_group_dbg_show: optional debugfs display hook that will provide * per-device info for a certain group in debugfs + * @pin_config_config_dbg_show: optional debugfs display hook that will decode + * and display a driver's pin configuration parameter */ struct pinconf_ops { #ifdef CONFIG_GENERIC_PINCONF @@ -56,6 +58,9 @@ struct pinconf_ops { void (*pin_config_group_dbg_show) (struct pinctrl_dev *pctldev, struct seq_file *s, unsigned selector); + void (*pin_config_config_dbg_show) (struct pinctrl_dev *pctldev, + struct seq_file *s, + unsigned long config); }; #endif -- cgit v1.2.3 From 96593afe6d724ffca309340afa914f8e1c6719fd Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Mon, 16 Apr 2012 14:22:34 +0530 Subject: pinctrl: pinconf: fix compilation error if PINCONF is not selected When we compile pinctrl layer for platforms without CONFIG_PINCONF, we get following compilation errors: drivers/built-in.o: In function `pinctrl_show': linux-2.6/drivers/pinctrl/core.c:1116: undefined reference to `pinconf_show_setting' drivers/built-in.o: In function `pinctrl_maps_show': linux-2.6/drivers/pinctrl/core.c:1071: undefined reference to `pinconf_show_map' drivers/built-in.o: In function `pinctrl_init_device_debugfs': linux-2.6/drivers/pinctrl/core.c:1224: undefined reference to `pinconf_init_device_debugfs' make[1]: *** [.tmp_vmlinux1] Error 1 This patch fixes this. Signed-off-by: Viresh Kumar Signed-off-by: Linus Walleij --- drivers/pinctrl/pinconf.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/pinctrl/pinconf.h b/drivers/pinctrl/pinconf.h index 32b8354d2510..e3ed8cb072a5 100644 --- a/drivers/pinctrl/pinconf.h +++ b/drivers/pinctrl/pinconf.h @@ -58,7 +58,7 @@ static inline int pinconf_apply_setting(struct pinctrl_setting const *setting) #endif -#if defined(CONFIG_PINMUX) && defined(CONFIG_DEBUG_FS) +#if defined(CONFIG_PINCONF) && defined(CONFIG_DEBUG_FS) void pinconf_show_map(struct seq_file *s, struct pinctrl_map const *map); void pinconf_show_setting(struct seq_file *s, -- cgit v1.2.3 From 2aeefe0233174015aef19dc06aac02a1119a44be Mon Sep 17 00:00:00 2001 From: Dong Aisheng Date: Mon, 16 Apr 2012 22:07:24 +0800 Subject: pinctrl: a minor fix of pin config debug information Signed-off-by: Dong Aisheng Signed-off-by: Linus Walleij --- drivers/pinctrl/pinconf.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/pinctrl/pinconf.c b/drivers/pinctrl/pinconf.c index 0133a69ad117..14f48c96b20d 100644 --- a/drivers/pinctrl/pinconf.c +++ b/drivers/pinctrl/pinconf.c @@ -478,7 +478,7 @@ static int pinconf_pins_show(struct seq_file *s, void *what) return 0; seq_puts(s, "Pin config settings per pin\n"); - seq_puts(s, "Format: pin (name): pinmux setting array\n"); + seq_puts(s, "Format: pin (name): configs\n"); mutex_lock(&pinctrl_mutex); @@ -529,7 +529,7 @@ static int pinconf_groups_show(struct seq_file *s, void *what) return 0; seq_puts(s, "Pin config settings per pin group\n"); - seq_puts(s, "Format: group (name): pinmux setting array\n"); + seq_puts(s, "Format: group (name): configs\n"); mutex_lock(&pinctrl_mutex); -- cgit v1.2.3 From 6d4ca1fb467932773da7b808c52f3d7ef4461ba0 Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Mon, 16 Apr 2012 10:51:00 -0600 Subject: pinctrl: implement devm_pinctrl_get()/put() These functions allow the driver core to automatically clean up any allocations made by drivers, thus leading to simplified drivers. Signed-off-by: Stephen Warren Signed-off-by: Linus Walleij --- Documentation/driver-model/devres.txt | 4 +++ Documentation/pinctrl.txt | 48 ++++++++++++++++++------------ drivers/pinctrl/core.c | 56 +++++++++++++++++++++++++++++++++++ include/linux/pinctrl/consumer.h | 44 +++++++++++++++++++++++++++ 4 files changed, 133 insertions(+), 19 deletions(-) diff --git a/Documentation/driver-model/devres.txt b/Documentation/driver-model/devres.txt index 2a596a4fc23e..ef4fa7b423d2 100644 --- a/Documentation/driver-model/devres.txt +++ b/Documentation/driver-model/devres.txt @@ -276,3 +276,7 @@ REGULATOR devm_regulator_get() devm_regulator_put() devm_regulator_bulk_get() + +PINCTRL + devm_pinctrl_get() + devm_pinctrl_put() diff --git a/Documentation/pinctrl.txt b/Documentation/pinctrl.txt index 4431c3e727ba..e40f4b4e1977 100644 --- a/Documentation/pinctrl.txt +++ b/Documentation/pinctrl.txt @@ -945,13 +945,13 @@ case), we define a mapping like this: The result of grabbing this mapping from the device with something like this (see next paragraph): - p = pinctrl_get(dev); + p = devm_pinctrl_get(dev); s = pinctrl_lookup_state(p, "8bit"); ret = pinctrl_select_state(p, s); or more simply: - p = pinctrl_get_select(dev, "8bit"); + p = devm_pinctrl_get_select(dev, "8bit"); Will be that you activate all the three bottom records in the mapping at once. Since they share the same name, pin controller device, function and @@ -985,7 +985,7 @@ foo_probe() /* Allocate a state holder named "foo" etc */ struct foo_state *foo = ...; - foo->p = pinctrl_get(&device); + foo->p = devm_pinctrl_get(&device); if (IS_ERR(foo->p)) { /* FIXME: clean up "foo" here */ return PTR_ERR(foo->p); @@ -993,24 +993,17 @@ foo_probe() foo->s = pinctrl_lookup_state(foo->p, PINCTRL_STATE_DEFAULT); if (IS_ERR(foo->s)) { - pinctrl_put(foo->p); /* FIXME: clean up "foo" here */ return PTR_ERR(s); } ret = pinctrl_select_state(foo->s); if (ret < 0) { - pinctrl_put(foo->p); /* FIXME: clean up "foo" here */ return ret; } } -foo_remove() -{ - pinctrl_put(state->p); -} - This get/lookup/select/put sequence can just as well be handled by bus drivers if you don't want each and every driver to handle it and you know the arrangement on your bus. @@ -1022,6 +1015,11 @@ The semantics of the pinctrl APIs are: kernel memory to hold the pinmux state. All mapping table parsing or similar slow operations take place within this API. +- devm_pinctrl_get() is a variant of pinctrl_get() that causes pinctrl_put() + to be called automatically on the retrieved pointer when the associated + device is removed. It is recommended to use this function over plain + pinctrl_get(). + - pinctrl_lookup_state() is called in process context to obtain a handle to a specific state for a the client device. This operation may be slow too. @@ -1034,14 +1032,25 @@ The semantics of the pinctrl APIs are: - pinctrl_put() frees all information associated with a pinctrl handle. +- devm_pinctrl_put() is a variant of pinctrl_put() that may be used to + explicitly destroy a pinctrl object returned by devm_pinctrl_get(). + However, use of this function will be rare, due to the automatic cleanup + that will occur even without calling it. + + pinctrl_get() must be paired with a plain pinctrl_put(). + pinctrl_get() may not be paired with devm_pinctrl_put(). + devm_pinctrl_get() can optionally be paired with devm_pinctrl_put(). + devm_pinctrl_get() may not be paired with plain pinctrl_put(). + Usually the pin control core handled the get/put pair and call out to the device drivers bookkeeping operations, like checking available functions and the associated pins, whereas the enable/disable pass on to the pin controller driver which takes care of activating and/or deactivating the mux setting by quickly poking some registers. -The pins are allocated for your device when you issue the pinctrl_get() call, -after this you should be able to see this in the debugfs listing of all pins. +The pins are allocated for your device when you issue the devm_pinctrl_get() +call, after this you should be able to see this in the debugfs listing of all +pins. NOTE: the pinctrl system will return -EPROBE_DEFER if it cannot find the requested pinctrl handles, for example if the pinctrl driver has not yet @@ -1092,13 +1101,13 @@ it, disables and releases it, and muxes it in on the pins defined by group B: #include -foo_switch() -{ - struct pinctrl *p; - struct pinctrl_state *s1, *s2; +struct pinctrl *p; +struct pinctrl_state *s1, *s2; +foo_probe() +{ /* Setup */ - p = pinctrl_get(&device); + p = devm_pinctrl_get(&device); if (IS_ERR(p)) ... @@ -1109,7 +1118,10 @@ foo_switch() s2 = pinctrl_lookup_state(foo->p, "pos-B"); if (IS_ERR(s2)) ... +} +foo_switch() +{ /* Enable on position A */ ret = pinctrl_select_state(s1); if (ret < 0) @@ -1123,8 +1135,6 @@ foo_switch() ... ... - - pinctrl_put(p); } The above has to be done from process context. diff --git a/drivers/pinctrl/core.c b/drivers/pinctrl/core.c index 59027ab8347a..2eaa1876534b 100644 --- a/drivers/pinctrl/core.c +++ b/drivers/pinctrl/core.c @@ -23,6 +23,7 @@ #include #include #include +#include #include #include #include "core.h" @@ -801,6 +802,61 @@ int pinctrl_select_state(struct pinctrl *p, struct pinctrl_state *state) } EXPORT_SYMBOL_GPL(pinctrl_select_state); +static void devm_pinctrl_release(struct device *dev, void *res) +{ + pinctrl_put(*(struct pinctrl **)res); +} + +/** + * struct devm_pinctrl_get() - Resource managed pinctrl_get() + * @dev: the device to obtain the handle for + * + * If there is a need to explicitly destroy the returned struct pinctrl, + * devm_pinctrl_put() should be used, rather than plain pinctrl_put(). + */ +struct pinctrl *devm_pinctrl_get(struct device *dev) +{ + struct pinctrl **ptr, *p; + + ptr = devres_alloc(devm_pinctrl_release, sizeof(*ptr), GFP_KERNEL); + if (!ptr) + return ERR_PTR(-ENOMEM); + + p = pinctrl_get(dev); + if (!IS_ERR(p)) { + *ptr = p; + devres_add(dev, ptr); + } else { + devres_free(ptr); + } + + return p; +} +EXPORT_SYMBOL_GPL(devm_pinctrl_get); + +static int devm_pinctrl_match(struct device *dev, void *res, void *data) +{ + struct pinctrl **p = res; + + return *p == data; +} + +/** + * devm_pinctrl_put() - Resource managed pinctrl_put() + * @p: the pinctrl handle to release + * + * Deallocate a struct pinctrl obtained via devm_pinctrl_get(). Normally + * this function will not need to be called and the resource management + * code will ensure that the resource is freed. + */ +void devm_pinctrl_put(struct pinctrl *p) +{ + WARN_ON(devres_destroy(p->dev, devm_pinctrl_release, + devm_pinctrl_match, p)); + pinctrl_put(p); +} +EXPORT_SYMBOL_GPL(devm_pinctrl_put); + int pinctrl_register_map(struct pinctrl_map const *maps, unsigned num_maps, bool dup, bool locked) { diff --git a/include/linux/pinctrl/consumer.h b/include/linux/pinctrl/consumer.h index 191e72688481..6dd96fb45482 100644 --- a/include/linux/pinctrl/consumer.h +++ b/include/linux/pinctrl/consumer.h @@ -36,6 +36,9 @@ extern struct pinctrl_state * __must_check pinctrl_lookup_state( const char *name); extern int pinctrl_select_state(struct pinctrl *p, struct pinctrl_state *s); +extern struct pinctrl * __must_check devm_pinctrl_get(struct device *dev); +extern void devm_pinctrl_put(struct pinctrl *p); + #else /* !CONFIG_PINCTRL */ static inline int pinctrl_request_gpio(unsigned gpio) @@ -79,6 +82,15 @@ static inline int pinctrl_select_state(struct pinctrl *p, return 0; } +static inline struct pinctrl * __must_check devm_pinctrl_get(struct device *dev) +{ + return NULL; +} + +static inline void devm_pinctrl_put(struct pinctrl *p) +{ +} + #endif /* CONFIG_PINCTRL */ static inline struct pinctrl * __must_check pinctrl_get_select( @@ -113,6 +125,38 @@ static inline struct pinctrl * __must_check pinctrl_get_select_default( return pinctrl_get_select(dev, PINCTRL_STATE_DEFAULT); } +static inline struct pinctrl * __must_check devm_pinctrl_get_select( + struct device *dev, const char *name) +{ + struct pinctrl *p; + struct pinctrl_state *s; + int ret; + + p = devm_pinctrl_get(dev); + if (IS_ERR(p)) + return p; + + s = pinctrl_lookup_state(p, name); + if (IS_ERR(s)) { + devm_pinctrl_put(p); + return ERR_PTR(PTR_ERR(s)); + } + + ret = pinctrl_select_state(p, s); + if (ret < 0) { + devm_pinctrl_put(p); + return ERR_PTR(ret); + } + + return p; +} + +static inline struct pinctrl * __must_check devm_pinctrl_get_select_default( + struct device *dev) +{ + return devm_pinctrl_get_select(dev, PINCTRL_STATE_DEFAULT); +} + #ifdef CONFIG_PINCONF extern int pin_config_get(const char *dev_name, const char *name, -- cgit v1.2.3 From d0bd8df56ebffe4a5ca42e27aca2a1243c70ed53 Mon Sep 17 00:00:00 2001 From: Dong Aisheng Date: Tue, 17 Apr 2012 15:00:45 +0800 Subject: pinctrl: show pin name when request pins Pin name is more useful to users. Acked-by: Stephen Warren Signed-off-by: Dong Aisheng Signed-off-by: Linus Walleij --- drivers/pinctrl/pinmux.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/pinctrl/pinmux.c b/drivers/pinctrl/pinmux.c index c494c37bf167..fa0357bd88ff 100644 --- a/drivers/pinctrl/pinmux.c +++ b/drivers/pinctrl/pinmux.c @@ -88,8 +88,6 @@ static int pin_request(struct pinctrl_dev *pctldev, const struct pinmux_ops *ops = pctldev->desc->pmxops; int status = -EINVAL; - dev_dbg(pctldev->dev, "request pin %d for %s\n", pin, owner); - desc = pin_desc_get(pctldev, pin); if (desc == NULL) { dev_err(pctldev->dev, @@ -97,6 +95,9 @@ static int pin_request(struct pinctrl_dev *pctldev, goto out; } + dev_dbg(pctldev->dev, "request pin %d (%s) for %s\n", + pin, desc->name, owner); + if (gpio_range) { /* There's no need to support multiple GPIO requests */ if (desc->gpio_owner) { -- cgit v1.2.3 From dcb5dbc305b975cccf40942feba40964069541d3 Mon Sep 17 00:00:00 2001 From: Dong Aisheng Date: Tue, 17 Apr 2012 15:00:46 +0800 Subject: pinctrl: show pin name for pingroups in sysfs Pin name is more useful to users. After change, when cat pingroups in sysfs, it becomes: root@freescale /sys/kernel/debug/pinctrl/20e0000.iomuxc$ cat pingroups registered pin groups: group: uart4grp-1 pin 219 (MX6Q_PAD_KEY_ROW0) pin 218 (MX6Q_PAD_KEY_COL0) group: usdhc4grp-1 pin 305 (MX6Q_PAD_SD4_CMD) pin 306 (MX6Q_PAD_SD4_CLK) pin 315 (MX6Q_PAD_SD4_DAT0) pin 316 (MX6Q_PAD_SD4_DAT1) pin 317 (MX6Q_PAD_SD4_DAT2) pin 318 (MX6Q_PAD_SD4_DAT3) pin 319 (MX6Q_PAD_SD4_DAT4) pin 320 (MX6Q_PAD_SD4_DAT5) pin 321 (MX6Q_PAD_SD4_DAT6) pin 322 (MX6Q_PAD_SD4_DAT7) Acked-by: Stephen Warren Signed-off-by: Dong Aisheng Signed-off-by: Linus Walleij --- drivers/pinctrl/core.c | 32 ++++++++++++++++++++++++++++---- drivers/pinctrl/core.h | 1 + 2 files changed, 29 insertions(+), 4 deletions(-) diff --git a/drivers/pinctrl/core.c b/drivers/pinctrl/core.c index 2eaa1876534b..5cd5a5a3a403 100644 --- a/drivers/pinctrl/core.c +++ b/drivers/pinctrl/core.c @@ -125,6 +125,25 @@ int pin_get_from_name(struct pinctrl_dev *pctldev, const char *name) return -EINVAL; } +/** + * pin_get_name_from_id() - look up a pin name from a pin id + * @pctldev: the pin control device to lookup the pin on + * @name: the name of the pin to look up + */ +const char *pin_get_name(struct pinctrl_dev *pctldev, const unsigned pin) +{ + const struct pin_desc *desc; + + desc = pin_desc_get(pctldev, pin); + if (desc == NULL) { + dev_err(pctldev->dev, "failed to get pin(%d) name\n", + pin); + return NULL; + } + + return desc->name; +} + /** * pin_is_valid() - check if pin exists on controller * @pctldev: the pin control device to check the pin on @@ -1011,6 +1030,7 @@ static int pinctrl_groups_show(struct seq_file *s, void *what) const unsigned *pins; unsigned num_pins; const char *gname = ops->get_group_name(pctldev, selector); + const char *pname; int ret; int i; @@ -1020,10 +1040,14 @@ static int pinctrl_groups_show(struct seq_file *s, void *what) seq_printf(s, "%s [ERROR GETTING PINS]\n", gname); else { - seq_printf(s, "group: %s, pins = [ ", gname); - for (i = 0; i < num_pins; i++) - seq_printf(s, "%d ", pins[i]); - seq_puts(s, "]\n"); + seq_printf(s, "group: %s\n", gname); + for (i = 0; i < num_pins; i++) { + pname = pin_get_name(pctldev, pins[i]); + if (WARN_ON(!pname)) + return -EINVAL; + seq_printf(s, "pin %d (%s)\n", pins[i], pname); + } + seq_puts(s, "\n"); } selector++; } diff --git a/drivers/pinctrl/core.h b/drivers/pinctrl/core.h index 98ae8085e735..1f40ff68a8c4 100644 --- a/drivers/pinctrl/core.h +++ b/drivers/pinctrl/core.h @@ -148,6 +148,7 @@ struct pin_desc { struct pinctrl_dev *get_pinctrl_dev_from_devname(const char *dev_name); int pin_get_from_name(struct pinctrl_dev *pctldev, const char *name); +const char *pin_get_name(struct pinctrl_dev *pctldev, const unsigned pin); int pinctrl_get_group_selector(struct pinctrl_dev *pctldev, const char *pin_group); -- cgit v1.2.3 From a8a97db984bdc5e89d42e41891543d2daaf314cb Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Thu, 5 Apr 2012 11:42:09 +0100 Subject: ARM: 7376/1: clkdev: Implement managed clk_get() Allow clk API users to simplify their cleanup paths by providing a managed version of clk_get() and clk_put(). Signed-off-by: Mark Brown Signed-off-by: Russell King --- Documentation/driver-model/devres.txt | 4 ++++ drivers/clk/clkdev.c | 45 +++++++++++++++++++++++++++++++++++ include/linux/clk.h | 32 +++++++++++++++++++++++++ 3 files changed, 81 insertions(+) diff --git a/Documentation/driver-model/devres.txt b/Documentation/driver-model/devres.txt index 2a596a4fc23e..9faac6ae3525 100644 --- a/Documentation/driver-model/devres.txt +++ b/Documentation/driver-model/devres.txt @@ -276,3 +276,7 @@ REGULATOR devm_regulator_get() devm_regulator_put() devm_regulator_bulk_get() + +CLOCK + devm_clk_get() + devm_clk_put() diff --git a/drivers/clk/clkdev.c b/drivers/clk/clkdev.c index 6db161f64ae0..a9a113782821 100644 --- a/drivers/clk/clkdev.c +++ b/drivers/clk/clkdev.c @@ -89,6 +89,51 @@ void clk_put(struct clk *clk) } EXPORT_SYMBOL(clk_put); +static void devm_clk_release(struct device *dev, void *res) +{ + clk_put(*(struct clk **)res); +} + +struct clk *devm_clk_get(struct device *dev, const char *id) +{ + struct clk **ptr, *clk; + + ptr = devres_alloc(devm_clk_release, sizeof(*ptr), GFP_KERNEL); + if (!ptr) + return ERR_PTR(-ENOMEM); + + clk = clk_get(dev, id); + if (!IS_ERR(clk)) { + *ptr = clk; + devres_add(dev, ptr); + } else { + devres_free(ptr); + } + + return clk; +} +EXPORT_SYMBOL(devm_clk_get); + +static int devm_clk_match(struct device *dev, void *res, void *data) +{ + struct clk **c = res; + if (!c || !*c) { + WARN_ON(!c || !*c); + return 0; + } + return *c == data; +} + +void devm_clk_put(struct device *dev, struct clk *clk) +{ + int ret; + + ret = devres_destroy(dev, devm_clk_release, devm_clk_match, clk); + + WARN_ON(ret); +} +EXPORT_SYMBOL(devm_clk_put); + void clkdev_add(struct clk_lookup *cl) { mutex_lock(&clocks_mutex); diff --git a/include/linux/clk.h b/include/linux/clk.h index b0252726df61..70cf722ac3af 100644 --- a/include/linux/clk.h +++ b/include/linux/clk.h @@ -100,6 +100,26 @@ int clk_notifier_unregister(struct clk *clk, struct notifier_block *nb); */ struct clk *clk_get(struct device *dev, const char *id); +/** + * devm_clk_get - lookup and obtain a managed reference to a clock producer. + * @dev: device for clock "consumer" + * @id: clock comsumer ID + * + * Returns a struct clk corresponding to the clock producer, or + * valid IS_ERR() condition containing errno. The implementation + * uses @dev and @id to determine the clock consumer, and thereby + * the clock producer. (IOW, @id may be identical strings, but + * clk_get may return different clock producers depending on @dev.) + * + * Drivers must assume that the clock source is not enabled. + * + * devm_clk_get should not be called from within interrupt context. + * + * The clock will automatically be freed when the device is unbound + * from the bus. + */ +struct clk *devm_clk_get(struct device *dev, const char *id); + /** * clk_prepare - prepare a clock source * @clk: clock source @@ -206,6 +226,18 @@ unsigned long clk_get_rate(struct clk *clk); */ void clk_put(struct clk *clk); +/** + * devm_clk_put - "free" a managed clock source + * @dev: device used to acuqire the clock + * @clk: clock source acquired with devm_clk_get() + * + * Note: drivers must ensure that all clk_enable calls made on this + * clock source are balanced by clk_disable calls prior to calling + * this function. + * + * clk_put should not be called from within interrupt context. + */ +void devm_clk_put(struct device *dev, struct clk *clk); /* * The remaining APIs are optional for machine class support. -- cgit v1.2.3 From 67b508715a61962f9b5b3ef3432e045a9cba4f1e Mon Sep 17 00:00:00 2001 From: viresh kumar Date: Thu, 19 Apr 2012 04:23:25 +0100 Subject: ARM: 7392/1: CLKDEV: Optimize clk_find() clk_find must return as soon as it gets the correct clock. Currently it check all clocks until it found a lookup with both dev_id and con_id matching. If only one of them is passed, then we don't actually need to wait for both of them to match. We can quit as soon as the requested id (dev_id or con_id) matches. Signed-off-by: Viresh Kumar Signed-off-by: Russell King --- drivers/clk/clkdev.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) diff --git a/drivers/clk/clkdev.c b/drivers/clk/clkdev.c index a9a113782821..d4a59931e75e 100644 --- a/drivers/clk/clkdev.c +++ b/drivers/clk/clkdev.c @@ -35,7 +35,12 @@ static DEFINE_MUTEX(clocks_mutex); static struct clk_lookup *clk_find(const char *dev_id, const char *con_id) { struct clk_lookup *p, *cl = NULL; - int match, best = 0; + int match, best_found = 0, best_possible = 0; + + if (dev_id) + best_possible += 2; + if (con_id) + best_possible += 1; list_for_each_entry(p, &clocks, node) { match = 0; @@ -50,10 +55,10 @@ static struct clk_lookup *clk_find(const char *dev_id, const char *con_id) match += 1; } - if (match > best) { + if (match > best_found) { cl = p; - if (match != 3) - best = match; + if (match != best_possible) + best_found = match; else break; } -- cgit v1.2.3 From 5b4f95e570dd76a4606c4bbd0dec652db8a32fd0 Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Thu, 22 Mar 2012 20:41:13 +0800 Subject: ARM: SPEAr600: Change FSMC and SMI clock names Change FSMC and SMI clock names to match the ones needed for DT based probing. Signed-off-by: Stefan Roese Cc: Viresh Kumar --- arch/arm/mach-spear6xx/clock.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-spear6xx/clock.c b/arch/arm/mach-spear6xx/clock.c index a86499a8a15f..f0518049c12e 100644 --- a/arch/arm/mach-spear6xx/clock.c +++ b/arch/arm/mach-spear6xx/clock.c @@ -660,8 +660,8 @@ static struct clk_lookup spear_clk_lookups[] = { { .dev_id = "dma", .clk = &dma_clk}, { .dev_id = "jpeg", .clk = &jpeg_clk}, { .dev_id = "gmac", .clk = &gmac_clk}, - { .dev_id = "smi", .clk = &smi_clk}, - { .dev_id = "fsmc-nand", .clk = &fsmc_clk}, + { .dev_id = "fc000000.flash", .clk = &smi_clk}, + { .dev_id = "d1800000.flash", .clk = &fsmc_clk}, /* clock derived from apb clk */ { .dev_id = "adc", .clk = &adc_clk}, { .dev_id = "ssp-pl022.0", .clk = &ssp0_clk}, -- cgit v1.2.3 From f08472f298627f110fb596d7a94e2621dba1953d Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Wed, 21 Mar 2012 20:42:51 +0530 Subject: SPEAr: Use CLKDEV_INIT for defining clk_lookups Signed-off-by: Viresh Kumar --- arch/arm/mach-spear3xx/clock.c | 111 +++++++++++++++++++++-------------------- arch/arm/mach-spear6xx/clock.c | 80 ++++++++++++++--------------- 2 files changed, 96 insertions(+), 95 deletions(-) diff --git a/arch/arm/mach-spear3xx/clock.c b/arch/arm/mach-spear3xx/clock.c index 6c4841f55223..6b2cd9ba4fd9 100644 --- a/arch/arm/mach-spear3xx/clock.c +++ b/arch/arm/mach-spear3xx/clock.c @@ -11,6 +11,7 @@ * warranty of any kind, whether express or implied. */ +#include #include #include #include @@ -652,85 +653,85 @@ static struct clk pwm_clk = { /* array of all spear 3xx clock lookups */ static struct clk_lookup spear_clk_lookups[] = { - { .con_id = "apb_pclk", .clk = &dummy_apb_pclk}, + CLKDEV_INIT(NULL, "apb_pclk", &dummy_apb_pclk), /* root clks */ - { .con_id = "osc_32k_clk", .clk = &osc_32k_clk}, - { .con_id = "osc_24m_clk", .clk = &osc_24m_clk}, + CLKDEV_INIT(NULL, "osc_32k_clk", &osc_32k_clk), + CLKDEV_INIT(NULL, "osc_24m_clk", &osc_24m_clk), /* clock derived from 32 KHz osc clk */ - { .dev_id = "rtc-spear", .clk = &rtc_clk}, + CLKDEV_INIT("rtc-spear", NULL, &rtc_clk), /* clock derived from 24 MHz osc clk */ - { .con_id = "pll1_clk", .clk = &pll1_clk}, - { .con_id = "pll3_48m_clk", .clk = &pll3_48m_clk}, - { .dev_id = "wdt", .clk = &wdt_clk}, + CLKDEV_INIT(NULL, "pll1_clk", &pll1_clk), + CLKDEV_INIT(NULL, "pll3_48m_clk", &pll3_48m_clk), + CLKDEV_INIT("wdt", NULL, &wdt_clk), /* clock derived from pll1 clk */ - { .con_id = "cpu_clk", .clk = &cpu_clk}, - { .con_id = "ahb_clk", .clk = &ahb_clk}, - { .con_id = "uart_synth_clk", .clk = &uart_synth_clk}, - { .con_id = "firda_synth_clk", .clk = &firda_synth_clk}, - { .con_id = "gpt0_synth_clk", .clk = &gpt0_synth_clk}, - { .con_id = "gpt1_synth_clk", .clk = &gpt1_synth_clk}, - { .con_id = "gpt2_synth_clk", .clk = &gpt2_synth_clk}, - { .dev_id = "uart", .clk = &uart_clk}, - { .dev_id = "firda", .clk = &firda_clk}, - { .dev_id = "gpt0", .clk = &gpt0_clk}, - { .dev_id = "gpt1", .clk = &gpt1_clk}, - { .dev_id = "gpt2", .clk = &gpt2_clk}, + CLKDEV_INIT(NULL, "cpu_clk", &cpu_clk), + CLKDEV_INIT(NULL, "ahb_clk", &ahb_clk), + CLKDEV_INIT(NULL, "uart_synth_clk", &uart_synth_clk), + CLKDEV_INIT(NULL, "firda_synth_clk", &firda_synth_clk), + CLKDEV_INIT(NULL, "gpt0_synth_clk", &gpt0_synth_clk), + CLKDEV_INIT(NULL, "gpt1_synth_clk", &gpt1_synth_clk), + CLKDEV_INIT(NULL, "gpt2_synth_clk", &gpt2_synth_clk), + CLKDEV_INIT("uart", NULL, &uart_clk), + CLKDEV_INIT("firda", NULL, &firda_clk), + CLKDEV_INIT("gpt0", NULL, &gpt0_clk), + CLKDEV_INIT("gpt1", NULL, &gpt1_clk), + CLKDEV_INIT("gpt2", NULL, &gpt2_clk), /* clock derived from pll3 clk */ - { .dev_id = "designware_udc", .clk = &usbd_clk}, - { .con_id = "usbh_clk", .clk = &usbh_clk}, + CLKDEV_INIT("designware_udc", NULL, &usbd_clk), + CLKDEV_INIT(NULL, "usbh_clk", &usbh_clk), /* clock derived from ahb clk */ - { .con_id = "apb_clk", .clk = &apb_clk}, - { .dev_id = "i2c_designware.0", .clk = &i2c_clk}, - { .dev_id = "dma", .clk = &dma_clk}, - { .dev_id = "jpeg", .clk = &jpeg_clk}, - { .dev_id = "gmac", .clk = &gmac_clk}, - { .dev_id = "smi", .clk = &smi_clk}, - { .dev_id = "c3", .clk = &c3_clk}, + CLKDEV_INIT(NULL, "apb_clk", &apb_clk), + CLKDEV_INIT("i2c_designware.0", NULL, &i2c_clk), + CLKDEV_INIT("dma", NULL, &dma_clk), + CLKDEV_INIT("jpeg", NULL, &jpeg_clk), + CLKDEV_INIT("gmac", NULL, &gmac_clk), + CLKDEV_INIT("smi", NULL, &smi_clk), + CLKDEV_INIT("c3", NULL, &c3_clk), /* clock derived from apb clk */ - { .dev_id = "adc", .clk = &adc_clk}, - { .dev_id = "ssp-pl022.0", .clk = &ssp0_clk}, - { .dev_id = "gpio", .clk = &gpio_clk}, + CLKDEV_INIT("adc", NULL, &adc_clk), + CLKDEV_INIT("ssp-pl022.0", NULL, &ssp0_clk), + CLKDEV_INIT("gpio", NULL, &gpio_clk), }; /* array of all spear 300 clock lookups */ #ifdef CONFIG_MACH_SPEAR300 static struct clk_lookup spear300_clk_lookups[] = { - { .dev_id = "clcd", .clk = &clcd_clk}, - { .con_id = "fsmc", .clk = &fsmc_clk}, - { .dev_id = "gpio1", .clk = &gpio1_clk}, - { .dev_id = "keyboard", .clk = &kbd_clk}, - { .dev_id = "sdhci", .clk = &sdhci_clk}, + CLKDEV_INIT("clcd", NULL, &clcd_clk), + CLKDEV_INIT("fsmc", NULL, &fsmc_clk), + CLKDEV_INIT("gpio1", NULL, &gpio1_clk), + CLKDEV_INIT("keyboard", NULL, &kbd_clk), + CLKDEV_INIT("sdhci", NULL, &sdhci_clk), }; #endif /* array of all spear 310 clock lookups */ #ifdef CONFIG_MACH_SPEAR310 static struct clk_lookup spear310_clk_lookups[] = { - { .con_id = "fsmc", .clk = &fsmc_clk}, - { .con_id = "emi", .clk = &emi_clk}, - { .dev_id = "uart1", .clk = &uart1_clk}, - { .dev_id = "uart2", .clk = &uart2_clk}, - { .dev_id = "uart3", .clk = &uart3_clk}, - { .dev_id = "uart4", .clk = &uart4_clk}, - { .dev_id = "uart5", .clk = &uart5_clk}, + CLKDEV_INIT("fsmc", NULL, &fsmc_clk), + CLKDEV_INIT(NULL, "emi", &emi_clk), + CLKDEV_INIT("uart1", NULL, &uart1_clk), + CLKDEV_INIT("uart2", NULL, &uart2_clk), + CLKDEV_INIT("uart3", NULL, &uart3_clk), + CLKDEV_INIT("uart4", NULL, &uart4_clk), + CLKDEV_INIT("uart5", NULL, &uart5_clk), }; #endif /* array of all spear 320 clock lookups */ #ifdef CONFIG_MACH_SPEAR320 static struct clk_lookup spear320_clk_lookups[] = { - { .dev_id = "clcd", .clk = &clcd_clk}, - { .con_id = "fsmc", .clk = &fsmc_clk}, - { .dev_id = "i2c_designware.1", .clk = &i2c1_clk}, - { .con_id = "emi", .clk = &emi_clk}, - { .dev_id = "pwm", .clk = &pwm_clk}, - { .dev_id = "sdhci", .clk = &sdhci_clk}, - { .dev_id = "c_can_platform.0", .clk = &can0_clk}, - { .dev_id = "c_can_platform.1", .clk = &can1_clk}, - { .dev_id = "ssp-pl022.1", .clk = &ssp1_clk}, - { .dev_id = "ssp-pl022.2", .clk = &ssp2_clk}, - { .dev_id = "uart1", .clk = &uart1_clk}, - { .dev_id = "uart2", .clk = &uart2_clk}, + CLKDEV_INIT("clcd", NULL, &clcd_clk), + CLKDEV_INIT("fsmc", NULL, &fsmc_clk), + CLKDEV_INIT("i2c_designware.1", NULL, &i2c1_clk), + CLKDEV_INIT(NULL, "emi", &emi_clk), + CLKDEV_INIT("pwm", NULL, &pwm_clk), + CLKDEV_INIT("sdhci", NULL, &sdhci_clk), + CLKDEV_INIT("c_can_platform.0", NULL, &can0_clk), + CLKDEV_INIT("c_can_platform.1", NULL, &can1_clk), + CLKDEV_INIT("ssp-pl022.1", NULL, &ssp1_clk), + CLKDEV_INIT("ssp-pl022.2", NULL, &ssp2_clk), + CLKDEV_INIT("uart1", NULL, &uart1_clk), + CLKDEV_INIT("uart2", NULL, &uart2_clk), }; #endif diff --git a/arch/arm/mach-spear6xx/clock.c b/arch/arm/mach-spear6xx/clock.c index f0518049c12e..5a469800b142 100644 --- a/arch/arm/mach-spear6xx/clock.c +++ b/arch/arm/mach-spear6xx/clock.c @@ -623,53 +623,53 @@ static struct clk dummy_apb_pclk; /* array of all spear 6xx clock lookups */ static struct clk_lookup spear_clk_lookups[] = { - { .con_id = "apb_pclk", .clk = &dummy_apb_pclk}, + CLKDEV_INIT(NULL, "apb_pclk", &dummy_apb_pclk), /* root clks */ - { .con_id = "osc_32k_clk", .clk = &osc_32k_clk}, - { .con_id = "osc_30m_clk", .clk = &osc_30m_clk}, + CLKDEV_INIT(NULL, "osc_32k_clk", &osc_32k_clk), + CLKDEV_INIT(NULL, "osc_30m_clk", &osc_30m_clk), /* clock derived from 32 KHz os clk */ - { .dev_id = "rtc-spear", .clk = &rtc_clk}, + CLKDEV_INIT("rtc-spear", NULL, &rtc_clk), /* clock derived from 30 MHz os clk */ - { .con_id = "pll1_clk", .clk = &pll1_clk}, - { .con_id = "pll3_48m_clk", .clk = &pll3_48m_clk}, - { .dev_id = "wdt", .clk = &wdt_clk}, + CLKDEV_INIT(NULL, "pll1_clk", &pll1_clk), + CLKDEV_INIT(NULL, "pll3_48m_clk", &pll3_48m_clk), + CLKDEV_INIT("wdt", NULL, &wdt_clk), /* clock derived from pll1 clk */ - { .con_id = "cpu_clk", .clk = &cpu_clk}, - { .con_id = "ahb_clk", .clk = &ahb_clk}, - { .con_id = "uart_synth_clk", .clk = &uart_synth_clk}, - { .con_id = "firda_synth_clk", .clk = &firda_synth_clk}, - { .con_id = "clcd_synth_clk", .clk = &clcd_synth_clk}, - { .con_id = "gpt0_synth_clk", .clk = &gpt0_synth_clk}, - { .con_id = "gpt2_synth_clk", .clk = &gpt2_synth_clk}, - { .con_id = "gpt3_synth_clk", .clk = &gpt3_synth_clk}, - { .dev_id = "d0000000.serial", .clk = &uart0_clk}, - { .dev_id = "d0080000.serial", .clk = &uart1_clk}, - { .dev_id = "firda", .clk = &firda_clk}, - { .dev_id = "clcd", .clk = &clcd_clk}, - { .dev_id = "gpt0", .clk = &gpt0_clk}, - { .dev_id = "gpt1", .clk = &gpt1_clk}, - { .dev_id = "gpt2", .clk = &gpt2_clk}, - { .dev_id = "gpt3", .clk = &gpt3_clk}, + CLKDEV_INIT(NULL, "cpu_clk", &cpu_clk), + CLKDEV_INIT(NULL, "ahb_clk", &ahb_clk), + CLKDEV_INIT(NULL, "uart_synth_clk", &uart_synth_clk), + CLKDEV_INIT(NULL, "firda_synth_clk", &firda_synth_clk), + CLKDEV_INIT(NULL, "clcd_synth_clk", &clcd_synth_clk), + CLKDEV_INIT(NULL, "gpt0_synth_clk", &gpt0_synth_clk), + CLKDEV_INIT(NULL, "gpt2_synth_clk", &gpt2_synth_clk), + CLKDEV_INIT(NULL, "gpt3_synth_clk", &gpt3_synth_clk), + CLKDEV_INIT("d0000000.serial", NULL, &uart0_clk), + CLKDEV_INIT("d0080000.serial", NULL, &uart1_clk), + CLKDEV_INIT("firda", NULL, &firda_clk), + CLKDEV_INIT("clcd", NULL, &clcd_clk), + CLKDEV_INIT("gpt0", NULL, &gpt0_clk), + CLKDEV_INIT("gpt1", NULL, &gpt1_clk), + CLKDEV_INIT("gpt2", NULL, &gpt2_clk), + CLKDEV_INIT("gpt3", NULL, &gpt3_clk), /* clock derived from pll3 clk */ - { .dev_id = "designware_udc", .clk = &usbd_clk}, - { .con_id = "usbh.0_clk", .clk = &usbh0_clk}, - { .con_id = "usbh.1_clk", .clk = &usbh1_clk}, + CLKDEV_INIT("designware_udc", NULL, &usbd_clk), + CLKDEV_INIT(NULL, "usbh.0_clk", &usbh0_clk), + CLKDEV_INIT(NULL, "usbh.1_clk", &usbh1_clk), /* clock derived from ahb clk */ - { .con_id = "apb_clk", .clk = &apb_clk}, - { .dev_id = "d0200000.i2c", .clk = &i2c_clk}, - { .dev_id = "dma", .clk = &dma_clk}, - { .dev_id = "jpeg", .clk = &jpeg_clk}, - { .dev_id = "gmac", .clk = &gmac_clk}, - { .dev_id = "fc000000.flash", .clk = &smi_clk}, - { .dev_id = "d1800000.flash", .clk = &fsmc_clk}, + CLKDEV_INIT(NULL, "apb_clk", &apb_clk), + CLKDEV_INIT("d0200000.i2c", NULL, &i2c_clk), + CLKDEV_INIT("dma", NULL, &dma_clk), + CLKDEV_INIT("jpeg", NULL, &jpeg_clk), + CLKDEV_INIT("gmac", NULL, &gmac_clk), + CLKDEV_INIT("fc000000.flash", NULL, &smi_clk), + CLKDEV_INIT("d1800000.flash", NULL, &fsmc_clk), /* clock derived from apb clk */ - { .dev_id = "adc", .clk = &adc_clk}, - { .dev_id = "ssp-pl022.0", .clk = &ssp0_clk}, - { .dev_id = "ssp-pl022.1", .clk = &ssp1_clk}, - { .dev_id = "ssp-pl022.2", .clk = &ssp2_clk}, - { .dev_id = "f0100000.gpio", .clk = &gpio0_clk}, - { .dev_id = "fc980000.gpio", .clk = &gpio1_clk}, - { .dev_id = "d8100000.gpio", .clk = &gpio2_clk}, + CLKDEV_INIT("adc", NULL, &adc_clk), + CLKDEV_INIT("ssp-pl022.0", NULL, &ssp0_clk), + CLKDEV_INIT("ssp-pl022.1", NULL, &ssp1_clk), + CLKDEV_INIT("ssp-pl022.2", NULL, &ssp2_clk), + CLKDEV_INIT("f0100000.gpio", NULL, &gpio0_clk), + CLKDEV_INIT("fc980000.gpio", NULL, &gpio1_clk), + CLKDEV_INIT("d8100000.gpio", NULL, &gpio2_clk), }; void __init spear6xx_clk_init(void) -- cgit v1.2.3 From 7477bd8f7eea54e8515fca0e6460ead374571241 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Wed, 28 Mar 2012 14:45:30 +0530 Subject: SPEAr3xx: Add clock instance of usb hosts - ehci and ohci 0 and 1 This patch adds following clocks: "usbh.0_clk" and "usbh.1_clk". They are used by ehci and ohci drivers for SPEAr3xx usb host devices. Signed-off-by: Viresh Kumar --- arch/arm/mach-spear3xx/clock.c | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) diff --git a/arch/arm/mach-spear3xx/clock.c b/arch/arm/mach-spear3xx/clock.c index 6b2cd9ba4fd9..47d4535b6f59 100644 --- a/arch/arm/mach-spear3xx/clock.c +++ b/arch/arm/mach-spear3xx/clock.c @@ -412,6 +412,21 @@ static struct clk usbd_clk = { .recalc = &follow_parent, }; +/* clock derived from usbh clk */ +/* usbh0 clock */ +static struct clk usbh0_clk = { + .flags = ALWAYS_ENABLED, + .pclk = &usbh_clk, + .recalc = &follow_parent, +}; + +/* usbh1 clock */ +static struct clk usbh1_clk = { + .flags = ALWAYS_ENABLED, + .pclk = &usbh_clk, + .recalc = &follow_parent, +}; + /* clock derived from ahb clk */ /* apb masks structure */ static struct bus_clk_masks apb_masks = { @@ -679,6 +694,9 @@ static struct clk_lookup spear_clk_lookups[] = { /* clock derived from pll3 clk */ CLKDEV_INIT("designware_udc", NULL, &usbd_clk), CLKDEV_INIT(NULL, "usbh_clk", &usbh_clk), + /* clock derived from usbh clk */ + CLKDEV_INIT(NULL, "usbh.0_clk", &usbh0_clk), + CLKDEV_INIT(NULL, "usbh.1_clk", &usbh1_clk), /* clock derived from ahb clk */ CLKDEV_INIT(NULL, "apb_clk", &apb_clk), CLKDEV_INIT("i2c_designware.0", NULL, &i2c_clk), -- cgit v1.2.3 From a3a4513b692d147d839c7e6d2e3f0d3280a503ce Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Mon, 26 Mar 2012 10:06:57 +0530 Subject: SPEAr6xx: Add compilation support for dtbs using 'make dtbs' 'make dtbs' compiles all dtbs for a family. For this we need to add entries for all board dtb's in Makefile.boot file. This patch does it. Signed-off-by: Viresh Kumar --- arch/arm/mach-spear6xx/Makefile.boot | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/mach-spear6xx/Makefile.boot b/arch/arm/mach-spear6xx/Makefile.boot index 4674a4c221db..af493da37ab6 100644 --- a/arch/arm/mach-spear6xx/Makefile.boot +++ b/arch/arm/mach-spear6xx/Makefile.boot @@ -1,3 +1,5 @@ zreladdr-y += 0x00008000 params_phys-y := 0x00000100 initrd_phys-y := 0x00800000 + +dtb-$(CONFIG_BOARD_SPEAR600_DT) += spear600-evb.dtb -- cgit v1.2.3 From 5fb00f965eeac548015bcd45414cccbe53b13d3f Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Mon, 26 Mar 2012 10:39:43 +0530 Subject: SPEAr3xx: Replace printk() with pr_*() For better print logs/messages, it is advisable to use pr_*() routines instead of directly calling printks. This patch removes direct calling of printks for spear3xx. Signed-off-by: Viresh Kumar --- arch/arm/mach-spear3xx/spear300.c | 8 +++++--- arch/arm/mach-spear3xx/spear310.c | 13 +++++++------ arch/arm/mach-spear3xx/spear320.c | 11 ++++++----- arch/arm/mach-spear3xx/spear3xx.c | 2 ++ 4 files changed, 20 insertions(+), 14 deletions(-) diff --git a/arch/arm/mach-spear3xx/spear300.c b/arch/arm/mach-spear3xx/spear300.c index f7db66812abb..adee72bb68ec 100644 --- a/arch/arm/mach-spear3xx/spear300.c +++ b/arch/arm/mach-spear3xx/spear300.c @@ -11,6 +11,8 @@ * warranty of any kind, whether express or implied. */ +#define pr_fmt(fmt) "SPEAr300: " fmt + #include #include #include @@ -447,7 +449,7 @@ void __init spear300_init(struct pmx_mode *pmx_mode, struct pmx_dev **pmx_devs, if (shirq_ras1.regs.base) { ret = spear_shirq_register(&shirq_ras1); if (ret) - printk(KERN_ERR "Error registering Shared IRQ\n"); + pr_err("Error registering Shared IRQ\n"); } /* pmx initialization */ @@ -459,8 +461,8 @@ void __init spear300_init(struct pmx_mode *pmx_mode, struct pmx_dev **pmx_devs, if (pmx_driver.base) { ret = pmx_register(&pmx_driver); if (ret) - printk(KERN_ERR "padmux: registration failed. err no" - ": %d\n", ret); + pr_err("padmux: registration failed. err no: %d\n", + ret); /* Free Mapping, device selection already done */ iounmap(pmx_driver.base); } diff --git a/arch/arm/mach-spear3xx/spear310.c b/arch/arm/mach-spear3xx/spear310.c index febaa6fcfb6a..b7c28764df92 100644 --- a/arch/arm/mach-spear3xx/spear310.c +++ b/arch/arm/mach-spear3xx/spear310.c @@ -11,6 +11,8 @@ * warranty of any kind, whether express or implied. */ +#define pr_fmt(fmt) "SPEAr310: " fmt + #include #include #include @@ -274,25 +276,25 @@ void __init spear310_init(struct pmx_mode *pmx_mode, struct pmx_dev **pmx_devs, shirq_ras1.regs.base = base; ret = spear_shirq_register(&shirq_ras1); if (ret) - printk(KERN_ERR "Error registering Shared IRQ 1\n"); + pr_err("Error registering Shared IRQ 1\n"); /* shirq 2 */ shirq_ras2.regs.base = base; ret = spear_shirq_register(&shirq_ras2); if (ret) - printk(KERN_ERR "Error registering Shared IRQ 2\n"); + pr_err("Error registering Shared IRQ 2\n"); /* shirq 3 */ shirq_ras3.regs.base = base; ret = spear_shirq_register(&shirq_ras3); if (ret) - printk(KERN_ERR "Error registering Shared IRQ 3\n"); + pr_err("Error registering Shared IRQ 3\n"); /* shirq 4 */ shirq_intrcomm_ras.regs.base = base; ret = spear_shirq_register(&shirq_intrcomm_ras); if (ret) - printk(KERN_ERR "Error registering Shared IRQ 4\n"); + pr_err("Error registering Shared IRQ 4\n"); } /* pmx initialization */ @@ -303,6 +305,5 @@ void __init spear310_init(struct pmx_mode *pmx_mode, struct pmx_dev **pmx_devs, ret = pmx_register(&pmx_driver); if (ret) - printk(KERN_ERR "padmux: registration failed. err no: %d\n", - ret); + pr_err("padmux: registration failed. err no: %d\n", ret); } diff --git a/arch/arm/mach-spear3xx/spear320.c b/arch/arm/mach-spear3xx/spear320.c index deaaf199612c..7bd39c0032bd 100644 --- a/arch/arm/mach-spear3xx/spear320.c +++ b/arch/arm/mach-spear3xx/spear320.c @@ -11,6 +11,8 @@ * warranty of any kind, whether express or implied. */ +#define pr_fmt(fmt) "SPEAr320: " fmt + #include #include #include @@ -527,19 +529,19 @@ void __init spear320_init(struct pmx_mode *pmx_mode, struct pmx_dev **pmx_devs, shirq_ras1.regs.base = base; ret = spear_shirq_register(&shirq_ras1); if (ret) - printk(KERN_ERR "Error registering Shared IRQ 1\n"); + pr_err("Error registering Shared IRQ 1\n"); /* shirq 3 */ shirq_ras3.regs.base = base; ret = spear_shirq_register(&shirq_ras3); if (ret) - printk(KERN_ERR "Error registering Shared IRQ 3\n"); + pr_err("Error registering Shared IRQ 3\n"); /* shirq 4 */ shirq_intrcomm_ras.regs.base = base; ret = spear_shirq_register(&shirq_intrcomm_ras); if (ret) - printk(KERN_ERR "Error registering Shared IRQ 4\n"); + pr_err("Error registering Shared IRQ 4\n"); } /* pmx initialization */ @@ -550,6 +552,5 @@ void __init spear320_init(struct pmx_mode *pmx_mode, struct pmx_dev **pmx_devs, ret = pmx_register(&pmx_driver); if (ret) - printk(KERN_ERR "padmux: registration failed. err no: %d\n", - ret); + pr_err("padmux: registration failed. err no: %d\n", ret); } diff --git a/arch/arm/mach-spear3xx/spear3xx.c b/arch/arm/mach-spear3xx/spear3xx.c index b1733c37f209..a236925e13b3 100644 --- a/arch/arm/mach-spear3xx/spear3xx.c +++ b/arch/arm/mach-spear3xx/spear3xx.c @@ -11,6 +11,8 @@ * warranty of any kind, whether express or implied. */ +#define pr_fmt(fmt) "SPEAr3xx: " fmt + #include #include #include -- cgit v1.2.3 From c5fa4fdcdbe5f52c3e36892cc81f9378339b00ce Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Fri, 23 Mar 2012 00:17:43 +0530 Subject: ARM: SPEAr3xx: Add device-tree support to SPEAr3xx architecture This patch adds a generic target for SPEAr3xx machines that can be configured via the device-tree. Currently the following devices are supported via the devicetree: - VIC interrupts - PL011 UART - PL061 GPIO - PL110 CLCD - SP805 WDT - Synopsys DW I2C - Synopsys DW ethernet - ST FSMC-NAND - ST SPEAR-SMI - ST SPEAR-KEYBOARD - ST SPEAR-RTC - ARASAN SDHCI-SPEAR - SPEAR-EHCI - SPEAR-OHCI Other peripheral devices will follow in later patches. This also removes IO_ADDRESS macro and creates 16 MB static mappings instead of 4K for individual peripherals. This is done to have efficient TLB lookup for any I/O windows that are located closely together. ioremap() on this range will return this mapping only instead of creating another. Signed-off-by: Viresh Kumar --- Documentation/arm/SPEAr/overview.txt | 13 +- Documentation/devicetree/bindings/arm/spear.txt | 18 +++ arch/arm/boot/dts/spear300-evb.dts | 179 ++++++++++++++++++++++++ arch/arm/boot/dts/spear300.dtsi | 72 ++++++++++ arch/arm/boot/dts/spear310-evb.dts | 107 ++++++++++++++ arch/arm/boot/dts/spear310.dtsi | 75 ++++++++++ arch/arm/boot/dts/spear320-evb.dts | 108 ++++++++++++++ arch/arm/boot/dts/spear320.dtsi | 90 ++++++++++++ arch/arm/boot/dts/spear3xx.dtsi | 136 ++++++++++++++++++ arch/arm/mach-spear3xx/Kconfig | 34 +---- arch/arm/mach-spear3xx/Makefile | 13 +- arch/arm/mach-spear3xx/Makefile.boot | 4 + arch/arm/mach-spear3xx/clock.c | 103 ++++++++------ arch/arm/mach-spear3xx/include/mach/generic.h | 29 ++-- arch/arm/mach-spear3xx/include/mach/hardware.h | 3 - arch/arm/mach-spear3xx/include/mach/spear.h | 9 +- arch/arm/mach-spear3xx/spear300.c | 97 +++++++++---- arch/arm/mach-spear3xx/spear300_evb.c | 75 ---------- arch/arm/mach-spear3xx/spear310.c | 126 ++++++++++++++--- arch/arm/mach-spear3xx/spear310_evb.c | 81 ----------- arch/arm/mach-spear3xx/spear320.c | 127 ++++++++++++++--- arch/arm/mach-spear3xx/spear320_evb.c | 79 ----------- arch/arm/mach-spear3xx/spear3xx.c | 127 ++++++++--------- arch/arm/plat-spear/Kconfig | 3 +- 24 files changed, 1222 insertions(+), 486 deletions(-) create mode 100644 arch/arm/boot/dts/spear300-evb.dts create mode 100644 arch/arm/boot/dts/spear300.dtsi create mode 100644 arch/arm/boot/dts/spear310-evb.dts create mode 100644 arch/arm/boot/dts/spear310.dtsi create mode 100644 arch/arm/boot/dts/spear320-evb.dts create mode 100644 arch/arm/boot/dts/spear320.dtsi create mode 100644 arch/arm/boot/dts/spear3xx.dtsi delete mode 100644 arch/arm/mach-spear3xx/spear300_evb.c delete mode 100644 arch/arm/mach-spear3xx/spear310_evb.c delete mode 100644 arch/arm/mach-spear3xx/spear320_evb.c diff --git a/Documentation/arm/SPEAr/overview.txt b/Documentation/arm/SPEAr/overview.txt index 253a35c6f782..28a9af953b9d 100644 --- a/Documentation/arm/SPEAr/overview.txt +++ b/Documentation/arm/SPEAr/overview.txt @@ -17,14 +17,14 @@ Introduction SPEAr (Platform) - SPEAr3XX (3XX SOC series, based on ARM9) - SPEAr300 (SOC) - - SPEAr300_EVB (Evaluation Board) + - SPEAr300 Evaluation Board - SPEAr310 (SOC) - - SPEAr310_EVB (Evaluation Board) + - SPEAr310 Evaluation Board - SPEAr320 (SOC) - - SPEAr320_EVB (Evaluation Board) + - SPEAr320 Evaluation Board - SPEAr6XX (6XX SOC series, based on ARM9) - SPEAr600 (SOC) - - SPEAr600_EVB (Evaluation Board) + - SPEAr600 Evaluation Board - SPEAr13XX (13XX SOC series, based on ARM CORTEXA9) - SPEAr1300 (SOC) @@ -51,10 +51,11 @@ Introduction Common file for machines of spear3xx family is mach-spear3xx/spear3xx.c and for spear6xx is mach-spear6xx/spear6xx.c. mach-spear* also contain soc/machine specific files, like spear300.c, spear310.c, spear320.c and spear600.c. - mach-spear* also contains board specific files for each machine type. + mach-spear* doesn't contains board specific files as they fully support + Flattened Device Tree. Document Author --------------- - Viresh Kumar, (c) 2010 ST Microelectronics + Viresh Kumar , (c) 2010-2012 ST Microelectronics diff --git a/Documentation/devicetree/bindings/arm/spear.txt b/Documentation/devicetree/bindings/arm/spear.txt index f8e54f092328..aa5f355cc947 100644 --- a/Documentation/devicetree/bindings/arm/spear.txt +++ b/Documentation/devicetree/bindings/arm/spear.txt @@ -6,3 +6,21 @@ Boards with the ST SPEAr600 SoC shall have the following properties: Required root node property: compatible = "st,spear600"; + +Boards with the ST SPEAr300 SoC shall have the following properties: + +Required root node property: + +compatible = "st,spear300"; + +Boards with the ST SPEAr310 SoC shall have the following properties: + +Required root node property: + +compatible = "st,spear310"; + +Boards with the ST SPEAr320 SoC shall have the following properties: + +Required root node property: + +compatible = "st,spear320"; diff --git a/arch/arm/boot/dts/spear300-evb.dts b/arch/arm/boot/dts/spear300-evb.dts new file mode 100644 index 000000000000..f2ee991705a4 --- /dev/null +++ b/arch/arm/boot/dts/spear300-evb.dts @@ -0,0 +1,179 @@ +/* + * DTS file for SPEAr300 Evaluation Baord + * + * Copyright 2012 Viresh Kumar + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "spear300.dtsi" + +/ { + model = "ST SPEAr300 Evaluation Board"; + compatible = "st,spear300-evb", "st,spear300"; + #address-cells = <1>; + #size-cells = <1>; + + memory { + reg = <0 0x40000000>; + }; + + ahb { + clcd@60000000 { + status = "okay"; + }; + + fsmc: flash@94000000 { + status = "okay"; + }; + + gmac: eth@e0800000 { + status = "okay"; + }; + + sdhci@70000000 { + int-gpio = <&gpio1 0 0>; + power-gpio = <&gpio1 2 1>; + status = "okay"; + }; + + smi: flash@fc000000 { + status = "okay"; + }; + + spi0: spi@d0100000 { + status = "okay"; + }; + + ehci@e1800000 { + status = "okay"; + }; + + ohci@e1900000 { + status = "okay"; + }; + + ohci@e2100000 { + status = "okay"; + }; + + apb { + gpio0: gpio@fc980000 { + status = "okay"; + }; + + gpio1: gpio@a9000000 { + status = "okay"; + }; + + i2c0: i2c@d0180000 { + status = "okay"; + }; + + kbd@a0000000 { + linux,keymap = < 0x00010000 + 0x00020100 + 0x00030200 + 0x00040300 + 0x00050400 + 0x00060500 + 0x00070600 + 0x00080700 + 0x00090800 + 0x000a0001 + 0x000c0101 + 0x000d0201 + 0x000e0301 + 0x000f0401 + 0x00100501 + 0x00110601 + 0x00120701 + 0x00130801 + 0x00140002 + 0x00150102 + 0x00160202 + 0x00170302 + 0x00180402 + 0x00190502 + 0x001a0602 + 0x001b0702 + 0x001c0802 + 0x001d0003 + 0x001e0103 + 0x001f0203 + 0x00200303 + 0x00210403 + 0x00220503 + 0x00230603 + 0x00240703 + 0x00250803 + 0x00260004 + 0x00270104 + 0x00280204 + 0x00290304 + 0x002a0404 + 0x002b0504 + 0x002c0604 + 0x002d0704 + 0x002e0804 + 0x002f0005 + 0x00300105 + 0x00310205 + 0x00320305 + 0x00330405 + 0x00340505 + 0x00350605 + 0x00360705 + 0x00370805 + 0x00380006 + 0x00390106 + 0x003a0206 + 0x003b0306 + 0x003c0406 + 0x003d0506 + 0x003e0606 + 0x003f0706 + 0x00400806 + 0x00410007 + 0x00420107 + 0x00430207 + 0x00440307 + 0x00450407 + 0x00460507 + 0x00470607 + 0x00480707 + 0x00490807 + 0x004a0008 + 0x004b0108 + 0x004c0208 + 0x004d0308 + 0x004e0408 + 0x004f0508 + 0x00500608 + 0x00510708 + 0x00520808 >; + autorepeat; + st,mode = <0>; + status = "okay"; + }; + + rtc@fc900000 { + status = "okay"; + }; + + serial@d0000000 { + status = "okay"; + }; + + wdt@fc880000 { + status = "okay"; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/spear300.dtsi b/arch/arm/boot/dts/spear300.dtsi new file mode 100644 index 000000000000..f9fcbf4f477b --- /dev/null +++ b/arch/arm/boot/dts/spear300.dtsi @@ -0,0 +1,72 @@ +/* + * DTS file for SPEAr300 SoC + * + * Copyright 2012 Viresh Kumar + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/include/ "spear3xx.dtsi" + +/ { + ahb { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges = <0x60000000 0x60000000 0x50000000 + 0xd0000000 0xd0000000 0x30000000>; + + clcd@60000000 { + compatible = "arm,clcd-pl110", "arm,primecell"; + reg = <0x60000000 0x1000>; + interrupts = <30>; + status = "disabled"; + }; + + fsmc: flash@94000000 { + compatible = "st,spear600-fsmc-nand"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x94000000 0x1000 /* FSMC Register */ + 0x80000000 0x0010>; /* NAND Base */ + reg-names = "fsmc_regs", "nand_data"; + st,ale-off = <0x20000>; + st,cle-off = <0x10000>; + status = "disabled"; + }; + + sdhci@70000000 { + compatible = "st,sdhci-spear"; + reg = <0x70000000 0x100>; + interrupts = <1>; + status = "disabled"; + }; + + apb { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges = <0xa0000000 0xa0000000 0x10000000 + 0xd0000000 0xd0000000 0x30000000>; + + gpio1: gpio@a9000000 { + #gpio-cells = <2>; + compatible = "arm,pl061", "arm,primecell"; + gpio-controller; + reg = <0xa9000000 0x1000>; + status = "disabled"; + }; + + kbd@a0000000 { + compatible = "st,spear300-kbd"; + reg = <0xa0000000 0x1000>; + status = "disabled"; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/spear310-evb.dts b/arch/arm/boot/dts/spear310-evb.dts new file mode 100644 index 000000000000..ec19d7b9795a --- /dev/null +++ b/arch/arm/boot/dts/spear310-evb.dts @@ -0,0 +1,107 @@ +/* + * DTS file for SPEAr310 Evaluation Baord + * + * Copyright 2012 Viresh Kumar + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "spear310.dtsi" + +/ { + model = "ST SPEAr310 Evaluation Board"; + compatible = "st,spear310-evb", "st,spear310"; + #address-cells = <1>; + #size-cells = <1>; + + memory { + reg = <0 0x40000000>; + }; + + ahb { + fsmc: flash@44000000 { + status = "okay"; + }; + + gmac: eth@e0800000 { + status = "okay"; + }; + + smi: flash@fc000000 { + status = "okay"; + clock-rate=<50000000>; + + flash@f8000000 { + label = "m25p64"; + reg = <0xf8000000 0x800000>; + #address-cells = <1>; + #size-cells = <1>; + st,smi-fast-mode; + }; + }; + + spi0: spi@d0100000 { + status = "okay"; + }; + + ehci@e1800000 { + status = "okay"; + }; + + ohci@e1900000 { + status = "okay"; + }; + + ohci@e2100000 { + status = "okay"; + }; + + apb { + gpio0: gpio@fc980000 { + status = "okay"; + }; + + i2c0: i2c@d0180000 { + status = "okay"; + }; + + rtc@fc900000 { + status = "okay"; + }; + + serial@d0000000 { + status = "okay"; + }; + + serial@b2000000 { + status = "okay"; + }; + + serial@b2080000 { + status = "okay"; + }; + + serial@b2100000 { + status = "okay"; + }; + + serial@b2180000 { + status = "okay"; + }; + + serial@b2200000 { + status = "okay"; + }; + + wdt@fc880000 { + status = "okay"; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/spear310.dtsi b/arch/arm/boot/dts/spear310.dtsi new file mode 100644 index 000000000000..dc7fa14da846 --- /dev/null +++ b/arch/arm/boot/dts/spear310.dtsi @@ -0,0 +1,75 @@ +/* + * DTS file for SPEAr310 SoC + * + * Copyright 2012 Viresh Kumar + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/include/ "spear3xx.dtsi" + +/ { + ahb { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges = <0x40000000 0x40000000 0x10000000 + 0xb0000000 0xb0000000 0x10000000 + 0xd0000000 0xd0000000 0x30000000>; + + fsmc: flash@44000000 { + compatible = "st,spear600-fsmc-nand"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x44000000 0x1000 /* FSMC Register */ + 0x40000000 0x0010>; /* NAND Base */ + reg-names = "fsmc_regs", "nand_data"; + st,ale-off = <0x10000>; + st,cle-off = <0x20000>; + status = "disabled"; + }; + + apb { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges = <0xb0000000 0xb0000000 0x10000000 + 0xd0000000 0xd0000000 0x30000000>; + + serial@b2000000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0xb2000000 0x1000>; + status = "disabled"; + }; + + serial@b2080000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0xb2080000 0x1000>; + status = "disabled"; + }; + + serial@b2100000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0xb2100000 0x1000>; + status = "disabled"; + }; + + serial@b2180000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0xb2180000 0x1000>; + status = "disabled"; + }; + + serial@b2200000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0xb2200000 0x1000>; + status = "disabled"; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/spear320-evb.dts b/arch/arm/boot/dts/spear320-evb.dts new file mode 100644 index 000000000000..5681a974d9d5 --- /dev/null +++ b/arch/arm/boot/dts/spear320-evb.dts @@ -0,0 +1,108 @@ +/* + * DTS file for SPEAr320 Evaluation Baord + * + * Copyright 2012 Viresh Kumar + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "spear320.dtsi" + +/ { + model = "ST SPEAr300 Evaluation Board"; + compatible = "st,spear300-evb", "st,spear300"; + #address-cells = <1>; + #size-cells = <1>; + + memory { + reg = <0 0x40000000>; + }; + + ahb { + clcd@90000000 { + status = "okay"; + }; + + fsmc: flash@4c000000 { + status = "okay"; + }; + + gmac: eth@e0800000 { + status = "okay"; + }; + + sdhci@70000000 { + power-gpio = <&gpio0 2 1>; + power_always_enb; + status = "okay"; + }; + + smi: flash@fc000000 { + status = "okay"; + }; + + spi0: spi@d0100000 { + status = "okay"; + }; + + spi1: spi@a5000000 { + status = "okay"; + }; + + spi2: spi@a6000000 { + status = "okay"; + }; + + ehci@e1800000 { + status = "okay"; + }; + + ohci@e1900000 { + status = "okay"; + }; + + ohci@e2100000 { + status = "okay"; + }; + + apb { + gpio0: gpio@fc980000 { + status = "okay"; + }; + + i2c0: i2c@d0180000 { + status = "okay"; + }; + + i2c1: i2c@a7000000 { + status = "okay"; + }; + + rtc@fc900000 { + status = "okay"; + }; + + serial@d0000000 { + status = "okay"; + }; + + serial@a3000000 { + status = "okay"; + }; + + serial@a4000000 { + status = "okay"; + }; + + wdt@fc880000 { + status = "okay"; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/spear320.dtsi b/arch/arm/boot/dts/spear320.dtsi new file mode 100644 index 000000000000..9a0267a5a0b7 --- /dev/null +++ b/arch/arm/boot/dts/spear320.dtsi @@ -0,0 +1,90 @@ +/* + * DTS file for SPEAr320 SoC + * + * Copyright 2012 Viresh Kumar + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/include/ "spear3xx.dtsi" + +/ { + ahb { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges = <0x40000000 0x40000000 0x70000000 + 0xd0000000 0xd0000000 0x30000000>; + + clcd@90000000 { + compatible = "arm,clcd-pl110", "arm,primecell"; + reg = <0x90000000 0x1000>; + interrupts = <33>; + status = "disabled"; + }; + + fsmc: flash@4c000000 { + compatible = "st,spear600-fsmc-nand"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x4c000000 0x1000 /* FSMC Register */ + 0x50000000 0x0010>; /* NAND Base */ + reg-names = "fsmc_regs", "nand_data"; + st,ale-off = <0x20000>; + st,cle-off = <0x10000>; + status = "disabled"; + }; + + sdhci@70000000 { + compatible = "st,sdhci-spear"; + reg = <0x70000000 0x100>; + interrupts = <29>; + status = "disabled"; + }; + + spi1: spi@a5000000 { + compatible = "arm,pl022", "arm,primecell"; + reg = <0xa5000000 0x1000>; + status = "disabled"; + }; + + spi2: spi@a6000000 { + compatible = "arm,pl022", "arm,primecell"; + reg = <0xa6000000 0x1000>; + status = "disabled"; + }; + + apb { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges = <0xa0000000 0xa0000000 0x10000000 + 0xd0000000 0xd0000000 0x30000000>; + + i2c1: i2c@a7000000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,designware-i2c"; + reg = <0xa7000000 0x1000>; + status = "disabled"; + }; + + serial@a3000000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0xa3000000 0x1000>; + status = "disabled"; + }; + + serial@a4000000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0xa4000000 0x1000>; + status = "disabled"; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/spear3xx.dtsi b/arch/arm/boot/dts/spear3xx.dtsi new file mode 100644 index 000000000000..924a6f67ed05 --- /dev/null +++ b/arch/arm/boot/dts/spear3xx.dtsi @@ -0,0 +1,136 @@ +/* + * DTS file for all SPEAr3xx SoCs + * + * Copyright 2012 Viresh Kumar + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/include/ "skeleton.dtsi" + +/ { + interrupt-parent = <&vic>; + + cpus { + cpu@0 { + compatible = "arm,arm926ejs"; + }; + }; + + memory { + device_type = "memory"; + reg = <0 0x40000000>; + }; + + ahb { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges = <0xd0000000 0xd0000000 0x30000000>; + + vic: interrupt-controller@f1100000 { + compatible = "arm,pl190-vic"; + interrupt-controller; + reg = <0xf1100000 0x1000>; + #interrupt-cells = <1>; + }; + + gmac: eth@e0800000 { + compatible = "st,spear600-gmac"; + reg = <0xe0800000 0x8000>; + interrupts = <23 22>; + interrupt-names = "macirq", "eth_wake_irq"; + status = "disabled"; + }; + + smi: flash@fc000000 { + compatible = "st,spear600-smi"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0xfc000000 0x1000>; + interrupts = <9>; + status = "disabled"; + }; + + spi0: spi@d0100000 { + compatible = "arm,pl022", "arm,primecell"; + reg = <0xd0100000 0x1000>; + interrupts = <20>; + status = "disabled"; + }; + + ehci@e1800000 { + compatible = "st,spear600-ehci", "usb-ehci"; + reg = <0xe1800000 0x1000>; + interrupts = <26>; + status = "disabled"; + }; + + ohci@e1900000 { + compatible = "st,spear600-ohci", "usb-ohci"; + reg = <0xe1900000 0x1000>; + interrupts = <25>; + status = "disabled"; + }; + + ohci@e2100000 { + compatible = "st,spear600-ohci", "usb-ohci"; + reg = <0xe2100000 0x1000>; + interrupts = <27>; + status = "disabled"; + }; + + apb { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges = <0xd0000000 0xd0000000 0x30000000>; + + gpio0: gpio@fc980000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0xfc980000 0x1000>; + interrupts = <11>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + status = "disabled"; + }; + + i2c0: i2c@d0180000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,designware-i2c"; + reg = <0xd0180000 0x1000>; + interrupts = <21>; + status = "disabled"; + }; + + rtc@fc900000 { + compatible = "st,spear-rtc"; + reg = <0xfc900000 0x1000>; + interrupts = <10>; + status = "disabled"; + }; + + serial@d0000000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0xd0000000 0x1000>; + interrupts = <19>; + status = "disabled"; + }; + + wdt@fc880000 { + compatible = "arm,sp805", "arm,primecell"; + reg = <0xfc880000 0x1000>; + interrupts = <12>; + status = "disabled"; + }; + }; + }; +}; diff --git a/arch/arm/mach-spear3xx/Kconfig b/arch/arm/mach-spear3xx/Kconfig index 2cee6b0de371..d9fe11cb6f16 100644 --- a/arch/arm/mach-spear3xx/Kconfig +++ b/arch/arm/mach-spear3xx/Kconfig @@ -5,39 +5,19 @@ if ARCH_SPEAR3XX menu "SPEAr3xx Implementations" -config BOARD_SPEAR300_EVB - bool "SPEAr300 Evaluation Board" - select MACH_SPEAR300 - help - Supports ST SPEAr300 Evaluation Board - -config BOARD_SPEAR310_EVB - bool "SPEAr310 Evaluation Board" - select MACH_SPEAR310 - help - Supports ST SPEAr310 Evaluation Board - -config BOARD_SPEAR320_EVB - bool "SPEAr320 Evaluation Board" - select MACH_SPEAR320 - help - Supports ST SPEAr320 Evaluation Board - -endmenu - config MACH_SPEAR300 - bool "SPEAr300" + bool "SPEAr300 Machine support with Device Tree" help - Supports ST SPEAr300 Machine + Supports ST SPEAr300 machine configured via the device-tree config MACH_SPEAR310 - bool "SPEAr310" + bool "SPEAr310 Machine support with Device Tree" help - Supports ST SPEAr310 Machine + Supports ST SPEAr310 machine configured via the device-tree config MACH_SPEAR320 - bool "SPEAr320" + bool "SPEAr320 Machine support with Device Tree" help - Supports ST SPEAr320 Machine - + Supports ST SPEAr320 machine configured via the device-tree +endmenu endif #ARCH_SPEAR3XX diff --git a/arch/arm/mach-spear3xx/Makefile b/arch/arm/mach-spear3xx/Makefile index b24862489704..17b5d83cf2d5 100644 --- a/arch/arm/mach-spear3xx/Makefile +++ b/arch/arm/mach-spear3xx/Makefile @@ -3,24 +3,13 @@ # # common files -obj-y += spear3xx.o clock.o +obj-$(CONFIG_ARCH_SPEAR3XX) += spear3xx.o clock.o # spear300 specific files obj-$(CONFIG_MACH_SPEAR300) += spear300.o -# spear300 boards files -obj-$(CONFIG_BOARD_SPEAR300_EVB) += spear300_evb.o - - # spear310 specific files obj-$(CONFIG_MACH_SPEAR310) += spear310.o -# spear310 boards files -obj-$(CONFIG_BOARD_SPEAR310_EVB) += spear310_evb.o - - # spear320 specific files obj-$(CONFIG_MACH_SPEAR320) += spear320.o - -# spear320 boards files -obj-$(CONFIG_BOARD_SPEAR320_EVB) += spear320_evb.o diff --git a/arch/arm/mach-spear3xx/Makefile.boot b/arch/arm/mach-spear3xx/Makefile.boot index 4674a4c221db..d93e2177e6ec 100644 --- a/arch/arm/mach-spear3xx/Makefile.boot +++ b/arch/arm/mach-spear3xx/Makefile.boot @@ -1,3 +1,7 @@ zreladdr-y += 0x00008000 params_phys-y := 0x00000100 initrd_phys-y := 0x00800000 + +dtb-$(CONFIG_MACH_SPEAR300) += spear300-evb.dtb +dtb-$(CONFIG_MACH_SPEAR310) += spear310-evb.dtb +dtb-$(CONFIG_MACH_SPEAR320) += spear320-evb.dtb diff --git a/arch/arm/mach-spear3xx/clock.c b/arch/arm/mach-spear3xx/clock.c index 47d4535b6f59..9293c144b24a 100644 --- a/arch/arm/mach-spear3xx/clock.c +++ b/arch/arm/mach-spear3xx/clock.c @@ -15,6 +15,7 @@ #include #include #include +#include #include #include #include @@ -673,11 +674,11 @@ static struct clk_lookup spear_clk_lookups[] = { CLKDEV_INIT(NULL, "osc_32k_clk", &osc_32k_clk), CLKDEV_INIT(NULL, "osc_24m_clk", &osc_24m_clk), /* clock derived from 32 KHz osc clk */ - CLKDEV_INIT("rtc-spear", NULL, &rtc_clk), + CLKDEV_INIT("fc900000.rtc", NULL, &rtc_clk), /* clock derived from 24 MHz osc clk */ CLKDEV_INIT(NULL, "pll1_clk", &pll1_clk), CLKDEV_INIT(NULL, "pll3_48m_clk", &pll3_48m_clk), - CLKDEV_INIT("wdt", NULL, &wdt_clk), + CLKDEV_INIT("fc880000.wdt", NULL, &wdt_clk), /* clock derived from pll1 clk */ CLKDEV_INIT(NULL, "cpu_clk", &cpu_clk), CLKDEV_INIT(NULL, "ahb_clk", &ahb_clk), @@ -686,7 +687,7 @@ static struct clk_lookup spear_clk_lookups[] = { CLKDEV_INIT(NULL, "gpt0_synth_clk", &gpt0_synth_clk), CLKDEV_INIT(NULL, "gpt1_synth_clk", &gpt1_synth_clk), CLKDEV_INIT(NULL, "gpt2_synth_clk", &gpt2_synth_clk), - CLKDEV_INIT("uart", NULL, &uart_clk), + CLKDEV_INIT("d0000000.serial", NULL, &uart_clk), CLKDEV_INIT("firda", NULL, &firda_clk), CLKDEV_INIT("gpt0", NULL, &gpt0_clk), CLKDEV_INIT("gpt1", NULL, &gpt1_clk), @@ -699,81 +700,95 @@ static struct clk_lookup spear_clk_lookups[] = { CLKDEV_INIT(NULL, "usbh.1_clk", &usbh1_clk), /* clock derived from ahb clk */ CLKDEV_INIT(NULL, "apb_clk", &apb_clk), - CLKDEV_INIT("i2c_designware.0", NULL, &i2c_clk), + CLKDEV_INIT("d0180000.i2c", NULL, &i2c_clk), CLKDEV_INIT("dma", NULL, &dma_clk), CLKDEV_INIT("jpeg", NULL, &jpeg_clk), - CLKDEV_INIT("gmac", NULL, &gmac_clk), - CLKDEV_INIT("smi", NULL, &smi_clk), + CLKDEV_INIT("e0800000.eth", NULL, &gmac_clk), + CLKDEV_INIT("fc000000.flash", NULL, &smi_clk), CLKDEV_INIT("c3", NULL, &c3_clk), /* clock derived from apb clk */ CLKDEV_INIT("adc", NULL, &adc_clk), - CLKDEV_INIT("ssp-pl022.0", NULL, &ssp0_clk), - CLKDEV_INIT("gpio", NULL, &gpio_clk), + CLKDEV_INIT("d0100000.spi", NULL, &ssp0_clk), + CLKDEV_INIT("fc980000.gpio", NULL, &gpio_clk), }; /* array of all spear 300 clock lookups */ #ifdef CONFIG_MACH_SPEAR300 static struct clk_lookup spear300_clk_lookups[] = { - CLKDEV_INIT("clcd", NULL, &clcd_clk), - CLKDEV_INIT("fsmc", NULL, &fsmc_clk), - CLKDEV_INIT("gpio1", NULL, &gpio1_clk), - CLKDEV_INIT("keyboard", NULL, &kbd_clk), - CLKDEV_INIT("sdhci", NULL, &sdhci_clk), + CLKDEV_INIT("60000000.clcd", NULL, &clcd_clk), + CLKDEV_INIT("94000000.flash", NULL, &fsmc_clk), + CLKDEV_INIT("a9000000.gpio", NULL, &gpio1_clk), + CLKDEV_INIT("a0000000.kbd", NULL, &kbd_clk), + CLKDEV_INIT("70000000.sdhci", NULL, &sdhci_clk), }; + +void __init spear300_clk_init(void) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(spear_clk_lookups); i++) + clk_register(&spear_clk_lookups[i]); + + for (i = 0; i < ARRAY_SIZE(spear300_clk_lookups); i++) + clk_register(&spear300_clk_lookups[i]); + + clk_init(); +} #endif /* array of all spear 310 clock lookups */ #ifdef CONFIG_MACH_SPEAR310 static struct clk_lookup spear310_clk_lookups[] = { - CLKDEV_INIT("fsmc", NULL, &fsmc_clk), + CLKDEV_INIT("44000000.flash", NULL, &fsmc_clk), CLKDEV_INIT(NULL, "emi", &emi_clk), - CLKDEV_INIT("uart1", NULL, &uart1_clk), - CLKDEV_INIT("uart2", NULL, &uart2_clk), - CLKDEV_INIT("uart3", NULL, &uart3_clk), - CLKDEV_INIT("uart4", NULL, &uart4_clk), - CLKDEV_INIT("uart5", NULL, &uart5_clk), + CLKDEV_INIT("b2000000.serial", NULL, &uart1_clk), + CLKDEV_INIT("b2080000.serial", NULL, &uart2_clk), + CLKDEV_INIT("b2100000.serial", NULL, &uart3_clk), + CLKDEV_INIT("b2180000.serial", NULL, &uart4_clk), + CLKDEV_INIT("b2200000.serial", NULL, &uart5_clk), }; + +void __init spear310_clk_init(void) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(spear_clk_lookups); i++) + clk_register(&spear_clk_lookups[i]); + + for (i = 0; i < ARRAY_SIZE(spear310_clk_lookups); i++) + clk_register(&spear310_clk_lookups[i]); + + clk_init(); +} #endif /* array of all spear 320 clock lookups */ #ifdef CONFIG_MACH_SPEAR320 static struct clk_lookup spear320_clk_lookups[] = { - CLKDEV_INIT("clcd", NULL, &clcd_clk), - CLKDEV_INIT("fsmc", NULL, &fsmc_clk), - CLKDEV_INIT("i2c_designware.1", NULL, &i2c1_clk), + CLKDEV_INIT("90000000.clcd", NULL, &clcd_clk), + CLKDEV_INIT("4c000000.flash", NULL, &fsmc_clk), + CLKDEV_INIT("a7000000.i2c", NULL, &i2c1_clk), CLKDEV_INIT(NULL, "emi", &emi_clk), CLKDEV_INIT("pwm", NULL, &pwm_clk), - CLKDEV_INIT("sdhci", NULL, &sdhci_clk), + CLKDEV_INIT("70000000.sdhci", NULL, &sdhci_clk), CLKDEV_INIT("c_can_platform.0", NULL, &can0_clk), CLKDEV_INIT("c_can_platform.1", NULL, &can1_clk), - CLKDEV_INIT("ssp-pl022.1", NULL, &ssp1_clk), - CLKDEV_INIT("ssp-pl022.2", NULL, &ssp2_clk), - CLKDEV_INIT("uart1", NULL, &uart1_clk), - CLKDEV_INIT("uart2", NULL, &uart2_clk), + CLKDEV_INIT("a5000000.spi", NULL, &ssp1_clk), + CLKDEV_INIT("a6000000.spi", NULL, &ssp2_clk), + CLKDEV_INIT("a3000000.serial", NULL, &uart1_clk), + CLKDEV_INIT("a4000000.serial", NULL, &uart2_clk), }; -#endif -void __init spear3xx_clk_init(void) +void __init spear320_clk_init(void) { - int i, cnt; - struct clk_lookup *lookups; - - if (machine_is_spear300()) { - cnt = ARRAY_SIZE(spear300_clk_lookups); - lookups = spear300_clk_lookups; - } else if (machine_is_spear310()) { - cnt = ARRAY_SIZE(spear310_clk_lookups); - lookups = spear310_clk_lookups; - } else { - cnt = ARRAY_SIZE(spear320_clk_lookups); - lookups = spear320_clk_lookups; - } + int i; for (i = 0; i < ARRAY_SIZE(spear_clk_lookups); i++) clk_register(&spear_clk_lookups[i]); - for (i = 0; i < cnt; i++) - clk_register(&lookups[i]); + for (i = 0; i < ARRAY_SIZE(spear320_clk_lookups); i++) + clk_register(&spear320_clk_lookups[i]); clk_init(); } +#endif diff --git a/arch/arm/mach-spear3xx/include/mach/generic.h b/arch/arm/mach-spear3xx/include/mach/generic.h index 14276e5a98d2..84ee2bbf1338 100644 --- a/arch/arm/mach-spear3xx/include/mach/generic.h +++ b/arch/arm/mach-spear3xx/include/mach/generic.h @@ -31,16 +31,13 @@ #define SPEAR_GPT0_CHAN1_IRQ SPEAR3XX_IRQ_CPU_GPT1_2 /* Add spear3xx family device structure declarations here */ -extern struct amba_device spear3xx_gpio_device; -extern struct amba_device spear3xx_uart_device; extern struct sys_timer spear3xx_timer; +extern struct pl022_ssp_controller pl022_plat_data; /* Add spear3xx family function declarations here */ -void __init spear3xx_clk_init(void); void __init spear_setup_timer(void); void __init spear3xx_map_io(void); -void __init spear3xx_init_irq(void); -void __init spear3xx_init(void); +void __init spear3xx_dt_init_irq(void); void spear_restart(char, const char *); @@ -99,9 +96,6 @@ extern struct pmx_dev spear3xx_pmx_plgpio_45_46_49_50; /* spear300 declarations */ #ifdef CONFIG_MACH_SPEAR300 -/* Add spear300 machine device structure declarations here */ -extern struct amba_device spear300_gpio1_device; - /* pad mux modes */ extern struct pmx_mode spear300_nand_mode; extern struct pmx_mode spear300_nor_mode; @@ -133,16 +127,13 @@ extern struct pmx_dev spear300_pmx_telecom_sdhci_4bit; extern struct pmx_dev spear300_pmx_telecom_sdhci_8bit; extern struct pmx_dev spear300_pmx_gpio1; -/* Add spear300 machine function declarations here */ -void __init spear300_init(struct pmx_mode *pmx_mode, struct pmx_dev **pmx_devs, - u8 pmx_dev_count); +/* Add spear300 machine declarations here */ +void __init spear300_clk_init(void); #endif /* CONFIG_MACH_SPEAR300 */ /* spear310 declarations */ #ifdef CONFIG_MACH_SPEAR310 -/* Add spear310 machine device structure declarations here */ - /* pad mux devices */ extern struct pmx_dev spear310_pmx_emi_cs_0_1_4_5; extern struct pmx_dev spear310_pmx_emi_cs_2_3; @@ -153,16 +144,13 @@ extern struct pmx_dev spear310_pmx_fsmc; extern struct pmx_dev spear310_pmx_rs485_0_1; extern struct pmx_dev spear310_pmx_tdm0; -/* Add spear310 machine function declarations here */ -void __init spear310_init(struct pmx_mode *pmx_mode, struct pmx_dev **pmx_devs, - u8 pmx_dev_count); +/* Add spear310 machine declarations here */ +void __init spear310_clk_init(void); #endif /* CONFIG_MACH_SPEAR310 */ /* spear320 declarations */ #ifdef CONFIG_MACH_SPEAR320 -/* Add spear320 machine device structure declarations here */ - /* pad mux modes */ extern struct pmx_mode spear320_auto_net_smii_mode; extern struct pmx_mode spear320_auto_net_mii_mode; @@ -193,9 +181,8 @@ extern struct pmx_dev spear320_pmx_smii0; extern struct pmx_dev spear320_pmx_smii1; extern struct pmx_dev spear320_pmx_i2c1; -/* Add spear320 machine function declarations here */ -void __init spear320_init(struct pmx_mode *pmx_mode, struct pmx_dev **pmx_devs, - u8 pmx_dev_count); +/* Add spear320 machine declarations here */ +void __init spear320_clk_init(void); #endif /* CONFIG_MACH_SPEAR320 */ diff --git a/arch/arm/mach-spear3xx/include/mach/hardware.h b/arch/arm/mach-spear3xx/include/mach/hardware.h index 4660c0d8ec0d..defa374f5bee 100644 --- a/arch/arm/mach-spear3xx/include/mach/hardware.h +++ b/arch/arm/mach-spear3xx/include/mach/hardware.h @@ -17,7 +17,4 @@ #include #include -/* Vitual to physical translation of statically mapped space */ -#define IO_ADDRESS(x) (x | 0xF0000000) - #endif /* __MACH_HARDWARE_H */ diff --git a/arch/arm/mach-spear3xx/include/mach/spear.h b/arch/arm/mach-spear3xx/include/mach/spear.h index 63fd98356919..8e3900aa0d45 100644 --- a/arch/arm/mach-spear3xx/include/mach/spear.h +++ b/arch/arm/mach-spear3xx/include/mach/spear.h @@ -25,8 +25,9 @@ /* ICM1 - Low speed connection */ #define SPEAR3XX_ICM1_2_BASE UL(0xD0000000) +#define VA_SPEAR3XX_ICM1_2_BASE UL(0xFD000000) #define SPEAR3XX_ICM1_UART_BASE UL(0xD0000000) -#define VA_SPEAR3XX_ICM1_UART_BASE IO_ADDRESS(SPEAR3XX_ICM1_UART_BASE) +#define VA_SPEAR3XX_ICM1_UART_BASE (VA_SPEAR3XX_ICM1_2_BASE | SPEAR3XX_ICM1_UART_BASE) #define SPEAR3XX_ICM1_ADC_BASE UL(0xD0080000) #define SPEAR3XX_ICM1_SSP_BASE UL(0xD0100000) #define SPEAR3XX_ICM1_I2C_BASE UL(0xD0180000) @@ -53,11 +54,11 @@ #define SPEAR3XX_ICM3_ML1_2_BASE UL(0xF0000000) #define SPEAR3XX_ML1_TMR_BASE UL(0xF0000000) #define SPEAR3XX_ML1_VIC_BASE UL(0xF1100000) -#define VA_SPEAR3XX_ML1_VIC_BASE IO_ADDRESS(SPEAR3XX_ML1_VIC_BASE) /* ICM3 - Basic Subsystem */ #define SPEAR3XX_ICM3_SMEM_BASE UL(0xF8000000) #define SPEAR3XX_ICM3_SMI_CTRL_BASE UL(0xFC000000) +#define VA_SPEAR3XX_ICM3_SMI_CTRL_BASE UL(0xFC000000) #define SPEAR3XX_ICM3_DMA_BASE UL(0xFC400000) #define SPEAR3XX_ICM3_SDRAM_CTRL_BASE UL(0xFC600000) #define SPEAR3XX_ICM3_TMR0_BASE UL(0xFC800000) @@ -65,9 +66,9 @@ #define SPEAR3XX_ICM3_RTC_BASE UL(0xFC900000) #define SPEAR3XX_ICM3_GPIO_BASE UL(0xFC980000) #define SPEAR3XX_ICM3_SYS_CTRL_BASE UL(0xFCA00000) -#define VA_SPEAR3XX_ICM3_SYS_CTRL_BASE IO_ADDRESS(SPEAR3XX_ICM3_SYS_CTRL_BASE) +#define VA_SPEAR3XX_ICM3_SYS_CTRL_BASE (VA_SPEAR3XX_ICM3_SMI_CTRL_BASE | SPEAR3XX_ICM3_SYS_CTRL_BASE) #define SPEAR3XX_ICM3_MISC_REG_BASE UL(0xFCA80000) -#define VA_SPEAR3XX_ICM3_MISC_REG_BASE IO_ADDRESS(SPEAR3XX_ICM3_MISC_REG_BASE) +#define VA_SPEAR3XX_ICM3_MISC_REG_BASE (VA_SPEAR3XX_ICM3_SMI_CTRL_BASE | SPEAR3XX_ICM3_MISC_REG_BASE) #define SPEAR3XX_ICM3_TMR1_BASE UL(0xFCB00000) /* Debug uart for linux, will be used for debug and uncompress messages */ diff --git a/arch/arm/mach-spear3xx/spear300.c b/arch/arm/mach-spear3xx/spear300.c index adee72bb68ec..c876c6a2caad 100644 --- a/arch/arm/mach-spear3xx/spear300.c +++ b/arch/arm/mach-spear3xx/spear300.c @@ -3,8 +3,8 @@ * * SPEAr300 machine source file * - * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar + * Copyright (C) 2009-2012 ST Microelectronics + * Viresh Kumar * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any @@ -13,10 +13,9 @@ #define pr_fmt(fmt) "SPEAr300: " fmt -#include -#include -#include -#include +#include +#include +#include #include #include #include @@ -425,24 +424,35 @@ static struct spear_shirq shirq_ras1 = { }, }; -/* Add spear300 specific devices here */ -/* arm gpio1 device registration */ -static struct pl061_platform_data gpio1_plat_data = { - .gpio_base = 8, - .irq_base = SPEAR300_GPIO1_INT_BASE, +/* padmux devices to enable */ +static struct pmx_dev *spear300_evb_pmx_devs[] = { + /* spear3xx specific devices */ + &spear3xx_pmx_i2c, + &spear3xx_pmx_ssp_cs, + &spear3xx_pmx_ssp, + &spear3xx_pmx_mii, + &spear3xx_pmx_uart0, + + /* spear300 specific devices */ + &spear300_pmx_fsmc_2_chips, + &spear300_pmx_clcd, + &spear300_pmx_telecom_sdhci_4bit, + &spear300_pmx_gpio1, }; -AMBA_APB_DEVICE(spear300_gpio1, "gpio1", 0, SPEAR300_GPIO_BASE, - {SPEAR300_VIRQ_GPIO1}, &gpio1_plat_data); +/* Add SPEAr300 auxdata to pass platform data */ +static struct of_dev_auxdata spear300_auxdata_lookup[] __initdata = { + OF_DEV_AUXDATA("arm,pl022", SPEAR3XX_ICM1_SSP_BASE, NULL, + &pl022_plat_data), + {} +}; -/* spear300 routines */ -void __init spear300_init(struct pmx_mode *pmx_mode, struct pmx_dev **pmx_devs, - u8 pmx_dev_count) +static void __init spear300_dt_init(void) { - int ret = 0; + int ret = -EINVAL; - /* call spear3xx family common init function */ - spear3xx_init(); + of_platform_populate(NULL, of_default_bus_match_table, + spear300_auxdata_lookup, NULL); /* shared irq registration */ shirq_ras1.regs.base = ioremap(SPEAR300_TELECOM_BASE, SZ_4K); @@ -452,18 +462,45 @@ void __init spear300_init(struct pmx_mode *pmx_mode, struct pmx_dev **pmx_devs, pr_err("Error registering Shared IRQ\n"); } - /* pmx initialization */ - pmx_driver.mode = pmx_mode; - pmx_driver.devs = pmx_devs; - pmx_driver.devs_count = pmx_dev_count; + if (of_machine_is_compatible("st,spear300-evb")) { + /* pmx initialization */ + pmx_driver.mode = &spear300_photo_frame_mode; + pmx_driver.devs = spear300_evb_pmx_devs; + pmx_driver.devs_count = ARRAY_SIZE(spear300_evb_pmx_devs); + + pmx_driver.base = ioremap(SPEAR300_SOC_CONFIG_BASE, SZ_4K); + if (pmx_driver.base) { + ret = pmx_register(&pmx_driver); + if (ret) + pr_err("padmux: registration failed. err no: %d\n", + ret); + /* Free Mapping, device selection already done */ + iounmap(pmx_driver.base); + } - pmx_driver.base = ioremap(SPEAR300_SOC_CONFIG_BASE, SZ_4K); - if (pmx_driver.base) { - ret = pmx_register(&pmx_driver); if (ret) - pr_err("padmux: registration failed. err no: %d\n", - ret); - /* Free Mapping, device selection already done */ - iounmap(pmx_driver.base); + pr_err("Initialization Failed"); } } + +static const char * const spear300_dt_board_compat[] = { + "st,spear300", + "st,spear300-evb", + NULL, +}; + +static void __init spear300_map_io(void) +{ + spear3xx_map_io(); + spear300_clk_init(); +} + +DT_MACHINE_START(SPEAR300_DT, "ST SPEAr300 SoC with Flattened Device Tree") + .map_io = spear300_map_io, + .init_irq = spear3xx_dt_init_irq, + .handle_irq = vic_handle_irq, + .timer = &spear3xx_timer, + .init_machine = spear300_dt_init, + .restart = spear_restart, + .dt_compat = spear300_dt_board_compat, +MACHINE_END diff --git a/arch/arm/mach-spear3xx/spear300_evb.c b/arch/arm/mach-spear3xx/spear300_evb.c deleted file mode 100644 index 3462ab9d6122..000000000000 --- a/arch/arm/mach-spear3xx/spear300_evb.c +++ /dev/null @@ -1,75 +0,0 @@ -/* - * arch/arm/mach-spear3xx/spear300_evb.c - * - * SPEAr300 evaluation board source file - * - * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include -#include -#include -#include -#include - -/* padmux devices to enable */ -static struct pmx_dev *pmx_devs[] = { - /* spear3xx specific devices */ - &spear3xx_pmx_i2c, - &spear3xx_pmx_ssp_cs, - &spear3xx_pmx_ssp, - &spear3xx_pmx_mii, - &spear3xx_pmx_uart0, - - /* spear300 specific devices */ - &spear300_pmx_fsmc_2_chips, - &spear300_pmx_clcd, - &spear300_pmx_telecom_sdhci_4bit, - &spear300_pmx_gpio1, -}; - -static struct amba_device *amba_devs[] __initdata = { - /* spear3xx specific devices */ - &spear3xx_gpio_device, - &spear3xx_uart_device, - - /* spear300 specific devices */ - &spear300_gpio1_device, -}; - -static struct platform_device *plat_devs[] __initdata = { - /* spear3xx specific devices */ - - /* spear300 specific devices */ -}; - -static void __init spear300_evb_init(void) -{ - unsigned int i; - - /* call spear300 machine init function */ - spear300_init(&spear300_photo_frame_mode, pmx_devs, - ARRAY_SIZE(pmx_devs)); - - /* Add Platform Devices */ - platform_add_devices(plat_devs, ARRAY_SIZE(plat_devs)); - - /* Add Amba Devices */ - for (i = 0; i < ARRAY_SIZE(amba_devs); i++) - amba_device_register(amba_devs[i], &iomem_resource); -} - -MACHINE_START(SPEAR300, "ST-SPEAR300-EVB") - .atag_offset = 0x100, - .map_io = spear3xx_map_io, - .init_irq = spear3xx_init_irq, - .handle_irq = vic_handle_irq, - .timer = &spear3xx_timer, - .init_machine = spear300_evb_init, - .restart = spear_restart, -MACHINE_END diff --git a/arch/arm/mach-spear3xx/spear310.c b/arch/arm/mach-spear3xx/spear310.c index b7c28764df92..641fd4cf6bc7 100644 --- a/arch/arm/mach-spear3xx/spear310.c +++ b/arch/arm/mach-spear3xx/spear310.c @@ -3,8 +3,8 @@ * * SPEAr310 machine source file * - * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar + * Copyright (C) 2009-2012 ST Microelectronics + * Viresh Kumar * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any @@ -13,8 +13,11 @@ #define pr_fmt(fmt) "SPEAr310: " fmt -#include -#include +#include +#include +#include +#include +#include #include #include #include @@ -257,17 +260,79 @@ static struct spear_shirq shirq_intrcomm_ras = { }, }; -/* Add spear310 specific devices here */ +/* padmux devices to enable */ +static struct pmx_dev *spear310_evb_pmx_devs[] = { + /* spear3xx specific devices */ + &spear3xx_pmx_i2c, + &spear3xx_pmx_ssp, + &spear3xx_pmx_gpio_pin0, + &spear3xx_pmx_gpio_pin1, + &spear3xx_pmx_gpio_pin2, + &spear3xx_pmx_gpio_pin3, + &spear3xx_pmx_gpio_pin4, + &spear3xx_pmx_gpio_pin5, + &spear3xx_pmx_uart0, + + /* spear310 specific devices */ + &spear310_pmx_emi_cs_0_1_4_5, + &spear310_pmx_emi_cs_2_3, + &spear310_pmx_uart1, + &spear310_pmx_uart2, + &spear310_pmx_uart3_4_5, + &spear310_pmx_fsmc, + &spear310_pmx_rs485_0_1, + &spear310_pmx_tdm0, +}; + +/* uart devices plat data */ +static struct amba_pl011_data spear310_uart_data[] = { + { + .dma_filter = pl08x_filter_id, + .dma_tx_param = "uart1_tx", + .dma_rx_param = "uart1_rx", + }, { + .dma_filter = pl08x_filter_id, + .dma_tx_param = "uart2_tx", + .dma_rx_param = "uart2_rx", + }, { + .dma_filter = pl08x_filter_id, + .dma_tx_param = "uart3_tx", + .dma_rx_param = "uart3_rx", + }, { + .dma_filter = pl08x_filter_id, + .dma_tx_param = "uart4_tx", + .dma_rx_param = "uart4_rx", + }, { + .dma_filter = pl08x_filter_id, + .dma_tx_param = "uart5_tx", + .dma_rx_param = "uart5_rx", + }, +}; -/* spear310 routines */ -void __init spear310_init(struct pmx_mode *pmx_mode, struct pmx_dev **pmx_devs, - u8 pmx_dev_count) +/* Add SPEAr310 auxdata to pass platform data */ +static struct of_dev_auxdata spear310_auxdata_lookup[] __initdata = { + OF_DEV_AUXDATA("arm,pl022", SPEAR3XX_ICM1_SSP_BASE, NULL, + &pl022_plat_data), + OF_DEV_AUXDATA("arm,pl011", SPEAR310_UART1_BASE, NULL, + &spear310_uart_data[0]), + OF_DEV_AUXDATA("arm,pl011", SPEAR310_UART2_BASE, NULL, + &spear310_uart_data[1]), + OF_DEV_AUXDATA("arm,pl011", SPEAR310_UART3_BASE, NULL, + &spear310_uart_data[2]), + OF_DEV_AUXDATA("arm,pl011", SPEAR310_UART4_BASE, NULL, + &spear310_uart_data[3]), + OF_DEV_AUXDATA("arm,pl011", SPEAR310_UART5_BASE, NULL, + &spear310_uart_data[4]), + {} +}; + +static void __init spear310_dt_init(void) { void __iomem *base; int ret = 0; - /* call spear3xx family common init function */ - spear3xx_init(); + of_platform_populate(NULL, of_default_bus_match_table, + spear310_auxdata_lookup, NULL); /* shared irq registration */ base = ioremap(SPEAR310_SOC_CONFIG_BASE, SZ_4K); @@ -297,13 +362,38 @@ void __init spear310_init(struct pmx_mode *pmx_mode, struct pmx_dev **pmx_devs, pr_err("Error registering Shared IRQ 4\n"); } - /* pmx initialization */ - pmx_driver.base = base; - pmx_driver.mode = pmx_mode; - pmx_driver.devs = pmx_devs; - pmx_driver.devs_count = pmx_dev_count; + if (of_machine_is_compatible("st,spear310-evb")) { + /* pmx initialization */ + pmx_driver.base = base; + pmx_driver.mode = NULL; + pmx_driver.devs = spear310_evb_pmx_devs; + pmx_driver.devs_count = ARRAY_SIZE(spear310_evb_pmx_devs); - ret = pmx_register(&pmx_driver); - if (ret) - pr_err("padmux: registration failed. err no: %d\n", ret); + ret = pmx_register(&pmx_driver); + if (ret) + pr_err("padmux: registration failed. err no: %d\n", + ret); + } } + +static const char * const spear310_dt_board_compat[] = { + "st,spear310", + "st,spear310-evb", + NULL, +}; + +static void __init spear310_map_io(void) +{ + spear3xx_map_io(); + spear310_clk_init(); +} + +DT_MACHINE_START(SPEAR310_DT, "ST SPEAr310 SoC with Flattened Device Tree") + .map_io = spear310_map_io, + .init_irq = spear3xx_dt_init_irq, + .handle_irq = vic_handle_irq, + .timer = &spear3xx_timer, + .init_machine = spear310_dt_init, + .restart = spear_restart, + .dt_compat = spear310_dt_board_compat, +MACHINE_END diff --git a/arch/arm/mach-spear3xx/spear310_evb.c b/arch/arm/mach-spear3xx/spear310_evb.c deleted file mode 100644 index f92c4993f65a..000000000000 --- a/arch/arm/mach-spear3xx/spear310_evb.c +++ /dev/null @@ -1,81 +0,0 @@ -/* - * arch/arm/mach-spear3xx/spear310_evb.c - * - * SPEAr310 evaluation board source file - * - * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include -#include -#include -#include -#include - -/* padmux devices to enable */ -static struct pmx_dev *pmx_devs[] = { - /* spear3xx specific devices */ - &spear3xx_pmx_i2c, - &spear3xx_pmx_ssp, - &spear3xx_pmx_gpio_pin0, - &spear3xx_pmx_gpio_pin1, - &spear3xx_pmx_gpio_pin2, - &spear3xx_pmx_gpio_pin3, - &spear3xx_pmx_gpio_pin4, - &spear3xx_pmx_gpio_pin5, - &spear3xx_pmx_uart0, - - /* spear310 specific devices */ - &spear310_pmx_emi_cs_0_1_4_5, - &spear310_pmx_emi_cs_2_3, - &spear310_pmx_uart1, - &spear310_pmx_uart2, - &spear310_pmx_uart3_4_5, - &spear310_pmx_fsmc, - &spear310_pmx_rs485_0_1, - &spear310_pmx_tdm0, -}; - -static struct amba_device *amba_devs[] __initdata = { - /* spear3xx specific devices */ - &spear3xx_gpio_device, - &spear3xx_uart_device, - - /* spear310 specific devices */ -}; - -static struct platform_device *plat_devs[] __initdata = { - /* spear3xx specific devices */ - - /* spear310 specific devices */ -}; - -static void __init spear310_evb_init(void) -{ - unsigned int i; - - /* call spear310 machine init function */ - spear310_init(NULL, pmx_devs, ARRAY_SIZE(pmx_devs)); - - /* Add Platform Devices */ - platform_add_devices(plat_devs, ARRAY_SIZE(plat_devs)); - - /* Add Amba Devices */ - for (i = 0; i < ARRAY_SIZE(amba_devs); i++) - amba_device_register(amba_devs[i], &iomem_resource); -} - -MACHINE_START(SPEAR310, "ST-SPEAR310-EVB") - .atag_offset = 0x100, - .map_io = spear3xx_map_io, - .init_irq = spear3xx_init_irq, - .handle_irq = vic_handle_irq, - .timer = &spear3xx_timer, - .init_machine = spear310_evb_init, - .restart = spear_restart, -MACHINE_END diff --git a/arch/arm/mach-spear3xx/spear320.c b/arch/arm/mach-spear3xx/spear320.c index 7bd39c0032bd..9c571d0f20c3 100644 --- a/arch/arm/mach-spear3xx/spear320.c +++ b/arch/arm/mach-spear3xx/spear320.c @@ -3,8 +3,8 @@ * * SPEAr320 machine source file * - * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar + * Copyright (C) 2009-2012 ST Microelectronics + * Viresh Kumar * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any @@ -13,8 +13,12 @@ #define pr_fmt(fmt) "SPEAr320: " fmt -#include -#include +#include +#include +#include +#include +#include +#include #include #include #include @@ -510,17 +514,79 @@ static struct spear_shirq shirq_intrcomm_ras = { }, }; -/* Add spear320 specific devices here */ +/* padmux devices to enable */ +static struct pmx_dev *spear320_evb_pmx_devs[] = { + /* spear3xx specific devices */ + &spear3xx_pmx_i2c, + &spear3xx_pmx_ssp, + &spear3xx_pmx_mii, + &spear3xx_pmx_uart0, + + /* spear320 specific devices */ + &spear320_pmx_fsmc, + &spear320_pmx_sdhci, + &spear320_pmx_i2s, + &spear320_pmx_uart1, + &spear320_pmx_uart2, + &spear320_pmx_can, + &spear320_pmx_pwm0, + &spear320_pmx_pwm1, + &spear320_pmx_pwm2, + &spear320_pmx_mii1, +}; + +static struct pl022_ssp_controller spear320_ssp_data[] = { + { + .bus_id = 1, + .enable_dma = 1, + .dma_filter = pl08x_filter_id, + .dma_tx_param = "ssp1_tx", + .dma_rx_param = "ssp1_rx", + .num_chipselect = 2, + }, { + .bus_id = 2, + .enable_dma = 1, + .dma_filter = pl08x_filter_id, + .dma_tx_param = "ssp2_tx", + .dma_rx_param = "ssp2_rx", + .num_chipselect = 2, + } +}; + +static struct amba_pl011_data spear320_uart_data[] = { + { + .dma_filter = pl08x_filter_id, + .dma_tx_param = "uart1_tx", + .dma_rx_param = "uart1_rx", + }, { + .dma_filter = pl08x_filter_id, + .dma_tx_param = "uart2_tx", + .dma_rx_param = "uart2_rx", + }, +}; -/* spear320 routines */ -void __init spear320_init(struct pmx_mode *pmx_mode, struct pmx_dev **pmx_devs, - u8 pmx_dev_count) +/* Add SPEAr310 auxdata to pass platform data */ +static struct of_dev_auxdata spear320_auxdata_lookup[] __initdata = { + OF_DEV_AUXDATA("arm,pl022", SPEAR3XX_ICM1_SSP_BASE, NULL, + &pl022_plat_data), + OF_DEV_AUXDATA("arm,pl022", SPEAR320_SSP0_BASE, NULL, + &spear320_ssp_data[0]), + OF_DEV_AUXDATA("arm,pl022", SPEAR320_SSP1_BASE, NULL, + &spear320_ssp_data[1]), + OF_DEV_AUXDATA("arm,pl011", SPEAR320_UART1_BASE, NULL, + &spear320_uart_data[0]), + OF_DEV_AUXDATA("arm,pl011", SPEAR320_UART2_BASE, NULL, + &spear320_uart_data[1]), + {} +}; + +static void __init spear320_dt_init(void) { void __iomem *base; int ret = 0; - /* call spear3xx family common init function */ - spear3xx_init(); + of_platform_populate(NULL, of_default_bus_match_table, + spear320_auxdata_lookup, NULL); /* shared irq registration */ base = ioremap(SPEAR320_SOC_CONFIG_BASE, SZ_4K); @@ -544,13 +610,38 @@ void __init spear320_init(struct pmx_mode *pmx_mode, struct pmx_dev **pmx_devs, pr_err("Error registering Shared IRQ 4\n"); } - /* pmx initialization */ - pmx_driver.base = base; - pmx_driver.mode = pmx_mode; - pmx_driver.devs = pmx_devs; - pmx_driver.devs_count = pmx_dev_count; + if (of_machine_is_compatible("st,spear320-evb")) { + /* pmx initialization */ + pmx_driver.base = base; + pmx_driver.mode = &spear320_auto_net_mii_mode; + pmx_driver.devs = spear320_evb_pmx_devs; + pmx_driver.devs_count = ARRAY_SIZE(spear320_evb_pmx_devs); - ret = pmx_register(&pmx_driver); - if (ret) - pr_err("padmux: registration failed. err no: %d\n", ret); + ret = pmx_register(&pmx_driver); + if (ret) + pr_err("padmux: registration failed. err no: %d\n", + ret); + } } + +static const char * const spear320_dt_board_compat[] = { + "st,spear320", + "st,spear320-evb", + NULL, +}; + +static void __init spear320_map_io(void) +{ + spear3xx_map_io(); + spear320_clk_init(); +} + +DT_MACHINE_START(SPEAR320_DT, "ST SPEAr320 SoC with Flattened Device Tree") + .map_io = spear320_map_io, + .init_irq = spear3xx_dt_init_irq, + .handle_irq = vic_handle_irq, + .timer = &spear3xx_timer, + .init_machine = spear320_dt_init, + .restart = spear_restart, + .dt_compat = spear320_dt_board_compat, +MACHINE_END diff --git a/arch/arm/mach-spear3xx/spear320_evb.c b/arch/arm/mach-spear3xx/spear320_evb.c deleted file mode 100644 index 105334ab7021..000000000000 --- a/arch/arm/mach-spear3xx/spear320_evb.c +++ /dev/null @@ -1,79 +0,0 @@ -/* - * arch/arm/mach-spear3xx/spear320_evb.c - * - * SPEAr320 evaluation board source file - * - * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include -#include -#include -#include -#include - -/* padmux devices to enable */ -static struct pmx_dev *pmx_devs[] = { - /* spear3xx specific devices */ - &spear3xx_pmx_i2c, - &spear3xx_pmx_ssp, - &spear3xx_pmx_mii, - &spear3xx_pmx_uart0, - - /* spear320 specific devices */ - &spear320_pmx_fsmc, - &spear320_pmx_sdhci, - &spear320_pmx_i2s, - &spear320_pmx_uart1, - &spear320_pmx_uart2, - &spear320_pmx_can, - &spear320_pmx_pwm0, - &spear320_pmx_pwm1, - &spear320_pmx_pwm2, - &spear320_pmx_mii1, -}; - -static struct amba_device *amba_devs[] __initdata = { - /* spear3xx specific devices */ - &spear3xx_gpio_device, - &spear3xx_uart_device, - - /* spear320 specific devices */ -}; - -static struct platform_device *plat_devs[] __initdata = { - /* spear3xx specific devices */ - - /* spear320 specific devices */ -}; - -static void __init spear320_evb_init(void) -{ - unsigned int i; - - /* call spear320 machine init function */ - spear320_init(&spear320_auto_net_mii_mode, pmx_devs, - ARRAY_SIZE(pmx_devs)); - - /* Add Platform Devices */ - platform_add_devices(plat_devs, ARRAY_SIZE(plat_devs)); - - /* Add Amba Devices */ - for (i = 0; i < ARRAY_SIZE(amba_devs); i++) - amba_device_register(amba_devs[i], &iomem_resource); -} - -MACHINE_START(SPEAR320, "ST-SPEAR320-EVB") - .atag_offset = 0x100, - .map_io = spear3xx_map_io, - .init_irq = spear3xx_init_irq, - .handle_irq = vic_handle_irq, - .timer = &spear3xx_timer, - .init_machine = spear320_evb_init, - .restart = spear_restart, -MACHINE_END diff --git a/arch/arm/mach-spear3xx/spear3xx.c b/arch/arm/mach-spear3xx/spear3xx.c index a236925e13b3..a94d8c12ed99 100644 --- a/arch/arm/mach-spear3xx/spear3xx.c +++ b/arch/arm/mach-spear3xx/spear3xx.c @@ -3,8 +3,8 @@ * * SPEAr3XX machines common source file * - * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar + * Copyright (C) 2009-2012 ST Microelectronics + * Viresh Kumar * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any @@ -13,76 +13,14 @@ #define pr_fmt(fmt) "SPEAr3xx: " fmt -#include -#include -#include +#include +#include +#include #include #include -#include -#include #include #include -/* Add spear3xx machines common devices here */ -/* gpio device registration */ -static struct pl061_platform_data gpio_plat_data = { - .gpio_base = 0, - .irq_base = SPEAR3XX_GPIO_INT_BASE, -}; - -AMBA_APB_DEVICE(spear3xx_gpio, "gpio", 0, SPEAR3XX_ICM3_GPIO_BASE, - {SPEAR3XX_IRQ_BASIC_GPIO}, &gpio_plat_data); - -/* uart device registration */ -AMBA_APB_DEVICE(spear3xx_uart, "uart", 0, SPEAR3XX_ICM1_UART_BASE, - {SPEAR3XX_IRQ_UART}, NULL); - -/* Do spear3xx familiy common initialization part here */ -void __init spear3xx_init(void) -{ - /* nothing to do for now */ -} - -/* This will initialize vic */ -void __init spear3xx_init_irq(void) -{ - vic_init((void __iomem *)VA_SPEAR3XX_ML1_VIC_BASE, 0, ~0, 0); -} - -/* Following will create static virtual/physical mappings */ -struct map_desc spear3xx_io_desc[] __initdata = { - { - .virtual = VA_SPEAR3XX_ICM1_UART_BASE, - .pfn = __phys_to_pfn(SPEAR3XX_ICM1_UART_BASE), - .length = SZ_4K, - .type = MT_DEVICE - }, { - .virtual = VA_SPEAR3XX_ML1_VIC_BASE, - .pfn = __phys_to_pfn(SPEAR3XX_ML1_VIC_BASE), - .length = SZ_4K, - .type = MT_DEVICE - }, { - .virtual = VA_SPEAR3XX_ICM3_SYS_CTRL_BASE, - .pfn = __phys_to_pfn(SPEAR3XX_ICM3_SYS_CTRL_BASE), - .length = SZ_4K, - .type = MT_DEVICE - }, { - .virtual = VA_SPEAR3XX_ICM3_MISC_REG_BASE, - .pfn = __phys_to_pfn(SPEAR3XX_ICM3_MISC_REG_BASE), - .length = SZ_4K, - .type = MT_DEVICE - }, -}; - -/* This will create static memory mapping for selected devices */ -void __init spear3xx_map_io(void) -{ - iotable_init(spear3xx_io_desc, ARRAY_SIZE(spear3xx_io_desc)); - - /* This will initialize clock framework */ - spear3xx_clk_init(); -} - /* pad multiplexing support */ /* devices */ static struct pmx_dev_mode pmx_firda_modes[] = { @@ -508,6 +446,51 @@ struct pmx_dev spear3xx_pmx_plgpio_45_46_49_50 = { }; #endif /* CONFIG_MACH_SPEAR310 || CONFIG_MACH_SPEAR320 */ +/* ssp device registration */ +struct pl022_ssp_controller pl022_plat_data = { + .bus_id = 0, + .enable_dma = 1, + .dma_filter = pl08x_filter_id, + .dma_tx_param = "ssp0_tx", + .dma_rx_param = "ssp0_rx", + /* + * This is number of spi devices that can be connected to spi. There are + * two type of chipselects on which slave devices can work. One is chip + * select provided by spi masters other is controlled through external + * gpio's. We can't use chipselect provided from spi master (because as + * soon as FIFO becomes empty, CS is disabled and transfer ends). So + * this number now depends on number of gpios available for spi. each + * slave on each master requires a separate gpio pin. + */ + .num_chipselect = 2, +}; + +/* + * Following will create 16MB static virtual/physical mappings + * PHYSICAL VIRTUAL + * 0xD0000000 0xFD000000 + * 0xFC000000 0xFC000000 + */ +struct map_desc spear3xx_io_desc[] __initdata = { + { + .virtual = VA_SPEAR3XX_ICM1_2_BASE, + .pfn = __phys_to_pfn(SPEAR3XX_ICM1_2_BASE), + .length = SZ_16M, + .type = MT_DEVICE + }, { + .virtual = VA_SPEAR3XX_ICM3_SMI_CTRL_BASE, + .pfn = __phys_to_pfn(SPEAR3XX_ICM3_SMI_CTRL_BASE), + .length = SZ_16M, + .type = MT_DEVICE + }, +}; + +/* This will create static memory mapping for selected devices */ +void __init spear3xx_map_io(void) +{ + iotable_init(spear3xx_io_desc, ARRAY_SIZE(spear3xx_io_desc)); +} + static void __init spear3xx_timer_init(void) { char pclk_name[] = "pll3_48m_clk"; @@ -538,3 +521,13 @@ static void __init spear3xx_timer_init(void) struct sys_timer spear3xx_timer = { .init = spear3xx_timer_init, }; + +static const struct of_device_id vic_of_match[] __initconst = { + { .compatible = "arm,pl190-vic", .data = vic_of_init, }, + { /* Sentinel */ } +}; + +void __init spear3xx_dt_init_irq(void) +{ + of_irq_init(vic_of_match); +} diff --git a/arch/arm/plat-spear/Kconfig b/arch/arm/plat-spear/Kconfig index 1bb3dbce8810..6c066fcb2979 100644 --- a/arch/arm/plat-spear/Kconfig +++ b/arch/arm/plat-spear/Kconfig @@ -9,9 +9,10 @@ choice default ARCH_SPEAR3XX config ARCH_SPEAR3XX - bool "SPEAr3XX" + bool "ST SPEAr3xx with Device Tree" select ARM_VIC select CPU_ARM926T + select USE_OF help Supports for ARM's SPEAR3XX family -- cgit v1.2.3 From 0b7ee71794b043de8a02d8887b69a57e4003106a Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Mon, 26 Mar 2012 10:29:23 +0530 Subject: SPEAr: Add PL080 DMA support for 3xx and 6xx Both SPEAr3xx and SPEAr6xx families have one instance of ARM PL080 DMA controller. This patch adds in support for that. Signed-off-by: Viresh Kumar --- arch/arm/boot/dts/spear300-evb.dts | 4 + arch/arm/boot/dts/spear310-evb.dts | 4 + arch/arm/boot/dts/spear320-evb.dts | 4 + arch/arm/boot/dts/spear3xx.dtsi | 8 + arch/arm/boot/dts/spear600-evb.dts | 4 + arch/arm/boot/dts/spear600.dtsi | 8 + arch/arm/mach-spear3xx/clock.c | 2 +- arch/arm/mach-spear3xx/include/mach/generic.h | 2 + arch/arm/mach-spear3xx/spear300.c | 193 +++++++++++++ arch/arm/mach-spear3xx/spear310.c | 192 +++++++++++++ arch/arm/mach-spear3xx/spear320.c | 192 +++++++++++++ arch/arm/mach-spear3xx/spear3xx.c | 19 ++ arch/arm/mach-spear6xx/clock.c | 2 +- arch/arm/mach-spear6xx/spear6xx.c | 372 +++++++++++++++++++++++++- arch/arm/plat-spear/Makefile | 2 +- arch/arm/plat-spear/include/plat/pl080.h | 21 ++ arch/arm/plat-spear/pl080.c | 79 ++++++ 17 files changed, 1104 insertions(+), 4 deletions(-) create mode 100644 arch/arm/plat-spear/include/plat/pl080.h create mode 100644 arch/arm/plat-spear/pl080.c diff --git a/arch/arm/boot/dts/spear300-evb.dts b/arch/arm/boot/dts/spear300-evb.dts index f2ee991705a4..eaecc29b9d81 100644 --- a/arch/arm/boot/dts/spear300-evb.dts +++ b/arch/arm/boot/dts/spear300-evb.dts @@ -29,6 +29,10 @@ status = "okay"; }; + dma@fc400000 { + status = "okay"; + }; + fsmc: flash@94000000 { status = "okay"; }; diff --git a/arch/arm/boot/dts/spear310-evb.dts b/arch/arm/boot/dts/spear310-evb.dts index ec19d7b9795a..c86af33f700e 100644 --- a/arch/arm/boot/dts/spear310-evb.dts +++ b/arch/arm/boot/dts/spear310-evb.dts @@ -25,6 +25,10 @@ }; ahb { + dma@fc400000 { + status = "okay"; + }; + fsmc: flash@44000000 { status = "okay"; }; diff --git a/arch/arm/boot/dts/spear320-evb.dts b/arch/arm/boot/dts/spear320-evb.dts index 5681a974d9d5..d43de712e863 100644 --- a/arch/arm/boot/dts/spear320-evb.dts +++ b/arch/arm/boot/dts/spear320-evb.dts @@ -29,6 +29,10 @@ status = "okay"; }; + dma@fc400000 { + status = "okay"; + }; + fsmc: flash@4c000000 { status = "okay"; }; diff --git a/arch/arm/boot/dts/spear3xx.dtsi b/arch/arm/boot/dts/spear3xx.dtsi index 924a6f67ed05..0ae7c8e86311 100644 --- a/arch/arm/boot/dts/spear3xx.dtsi +++ b/arch/arm/boot/dts/spear3xx.dtsi @@ -40,6 +40,14 @@ #interrupt-cells = <1>; }; + dma@fc400000 { + compatible = "arm,pl080", "arm,primecell"; + reg = <0xfc400000 0x1000>; + interrupt-parent = <&vic>; + interrupts = <8>; + status = "disabled"; + }; + gmac: eth@e0800000 { compatible = "st,spear600-gmac"; reg = <0xe0800000 0x8000>; diff --git a/arch/arm/boot/dts/spear600-evb.dts b/arch/arm/boot/dts/spear600-evb.dts index 636292e18c90..790a7a8a5ccd 100644 --- a/arch/arm/boot/dts/spear600-evb.dts +++ b/arch/arm/boot/dts/spear600-evb.dts @@ -24,6 +24,10 @@ }; ahb { + dma@fc400000 { + status = "okay"; + }; + gmac: ethernet@e0800000 { phy-mode = "gmii"; status = "okay"; diff --git a/arch/arm/boot/dts/spear600.dtsi b/arch/arm/boot/dts/spear600.dtsi index ebe0885a2b98..d777e3a6f178 100644 --- a/arch/arm/boot/dts/spear600.dtsi +++ b/arch/arm/boot/dts/spear600.dtsi @@ -45,6 +45,14 @@ #interrupt-cells = <1>; }; + dma@fc400000 { + compatible = "arm,pl080", "arm,primecell"; + reg = <0xfc400000 0x1000>; + interrupt-parent = <&vic1>; + interrupts = <10>; + status = "disabled"; + }; + gmac: ethernet@e0800000 { compatible = "st,spear600-gmac"; reg = <0xe0800000 0x8000>; diff --git a/arch/arm/mach-spear3xx/clock.c b/arch/arm/mach-spear3xx/clock.c index 9293c144b24a..eeafe38eab25 100644 --- a/arch/arm/mach-spear3xx/clock.c +++ b/arch/arm/mach-spear3xx/clock.c @@ -701,7 +701,7 @@ static struct clk_lookup spear_clk_lookups[] = { /* clock derived from ahb clk */ CLKDEV_INIT(NULL, "apb_clk", &apb_clk), CLKDEV_INIT("d0180000.i2c", NULL, &i2c_clk), - CLKDEV_INIT("dma", NULL, &dma_clk), + CLKDEV_INIT("fc400000.dma", NULL, &dma_clk), CLKDEV_INIT("jpeg", NULL, &jpeg_clk), CLKDEV_INIT("e0800000.eth", NULL, &gmac_clk), CLKDEV_INIT("fc000000.flash", NULL, &smi_clk), diff --git a/arch/arm/mach-spear3xx/include/mach/generic.h b/arch/arm/mach-spear3xx/include/mach/generic.h index 84ee2bbf1338..a7569584cbe8 100644 --- a/arch/arm/mach-spear3xx/include/mach/generic.h +++ b/arch/arm/mach-spear3xx/include/mach/generic.h @@ -14,6 +14,7 @@ #ifndef __MACH_GENERIC_H #define __MACH_GENERIC_H +#include #include #include #include @@ -33,6 +34,7 @@ /* Add spear3xx family device structure declarations here */ extern struct sys_timer spear3xx_timer; extern struct pl022_ssp_controller pl022_plat_data; +extern struct pl08x_platform_data pl080_plat_data; /* Add spear3xx family function declarations here */ void __init spear_setup_timer(void); diff --git a/arch/arm/mach-spear3xx/spear300.c b/arch/arm/mach-spear3xx/spear300.c index c876c6a2caad..f46fc2692ab6 100644 --- a/arch/arm/mach-spear3xx/spear300.c +++ b/arch/arm/mach-spear3xx/spear300.c @@ -13,6 +13,7 @@ #define pr_fmt(fmt) "SPEAr300: " fmt +#include #include #include #include @@ -440,10 +441,199 @@ static struct pmx_dev *spear300_evb_pmx_devs[] = { &spear300_pmx_gpio1, }; +/* DMAC platform data's slave info */ +struct pl08x_channel_data spear300_dma_info[] = { + { + .bus_id = "uart0_rx", + .min_signal = 2, + .max_signal = 2, + .muxval = 0, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "uart0_tx", + .min_signal = 3, + .max_signal = 3, + .muxval = 0, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "ssp0_rx", + .min_signal = 8, + .max_signal = 8, + .muxval = 0, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "ssp0_tx", + .min_signal = 9, + .max_signal = 9, + .muxval = 0, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "i2c_rx", + .min_signal = 10, + .max_signal = 10, + .muxval = 0, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "i2c_tx", + .min_signal = 11, + .max_signal = 11, + .muxval = 0, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "irda", + .min_signal = 12, + .max_signal = 12, + .muxval = 0, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "adc", + .min_signal = 13, + .max_signal = 13, + .muxval = 0, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "to_jpeg", + .min_signal = 14, + .max_signal = 14, + .muxval = 0, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "from_jpeg", + .min_signal = 15, + .max_signal = 15, + .muxval = 0, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "ras0_rx", + .min_signal = 0, + .max_signal = 0, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "ras0_tx", + .min_signal = 1, + .max_signal = 1, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "ras1_rx", + .min_signal = 2, + .max_signal = 2, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "ras1_tx", + .min_signal = 3, + .max_signal = 3, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "ras2_rx", + .min_signal = 4, + .max_signal = 4, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "ras2_tx", + .min_signal = 5, + .max_signal = 5, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "ras3_rx", + .min_signal = 6, + .max_signal = 6, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "ras3_tx", + .min_signal = 7, + .max_signal = 7, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "ras4_rx", + .min_signal = 8, + .max_signal = 8, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "ras4_tx", + .min_signal = 9, + .max_signal = 9, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "ras5_rx", + .min_signal = 10, + .max_signal = 10, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "ras5_tx", + .min_signal = 11, + .max_signal = 11, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "ras6_rx", + .min_signal = 12, + .max_signal = 12, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "ras6_tx", + .min_signal = 13, + .max_signal = 13, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "ras7_rx", + .min_signal = 14, + .max_signal = 14, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "ras7_tx", + .min_signal = 15, + .max_signal = 15, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, +}; + /* Add SPEAr300 auxdata to pass platform data */ static struct of_dev_auxdata spear300_auxdata_lookup[] __initdata = { OF_DEV_AUXDATA("arm,pl022", SPEAR3XX_ICM1_SSP_BASE, NULL, &pl022_plat_data), + OF_DEV_AUXDATA("arm,pl080", SPEAR3XX_ICM3_DMA_BASE, NULL, + &pl080_plat_data), {} }; @@ -451,6 +641,9 @@ static void __init spear300_dt_init(void) { int ret = -EINVAL; + pl080_plat_data.slave_channels = spear300_dma_info; + pl080_plat_data.num_slave_channels = ARRAY_SIZE(spear300_dma_info); + of_platform_populate(NULL, of_default_bus_match_table, spear300_auxdata_lookup, NULL); diff --git a/arch/arm/mach-spear3xx/spear310.c b/arch/arm/mach-spear3xx/spear310.c index 641fd4cf6bc7..063e7da0438a 100644 --- a/arch/arm/mach-spear3xx/spear310.c +++ b/arch/arm/mach-spear3xx/spear310.c @@ -284,6 +284,193 @@ static struct pmx_dev *spear310_evb_pmx_devs[] = { &spear310_pmx_tdm0, }; +/* DMAC platform data's slave info */ +struct pl08x_channel_data spear310_dma_info[] = { + { + .bus_id = "uart0_rx", + .min_signal = 2, + .max_signal = 2, + .muxval = 0, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "uart0_tx", + .min_signal = 3, + .max_signal = 3, + .muxval = 0, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "ssp0_rx", + .min_signal = 8, + .max_signal = 8, + .muxval = 0, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "ssp0_tx", + .min_signal = 9, + .max_signal = 9, + .muxval = 0, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "i2c_rx", + .min_signal = 10, + .max_signal = 10, + .muxval = 0, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "i2c_tx", + .min_signal = 11, + .max_signal = 11, + .muxval = 0, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "irda", + .min_signal = 12, + .max_signal = 12, + .muxval = 0, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "adc", + .min_signal = 13, + .max_signal = 13, + .muxval = 0, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "to_jpeg", + .min_signal = 14, + .max_signal = 14, + .muxval = 0, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "from_jpeg", + .min_signal = 15, + .max_signal = 15, + .muxval = 0, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "uart1_rx", + .min_signal = 0, + .max_signal = 0, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "uart1_tx", + .min_signal = 1, + .max_signal = 1, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "uart2_rx", + .min_signal = 2, + .max_signal = 2, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "uart2_tx", + .min_signal = 3, + .max_signal = 3, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "uart3_rx", + .min_signal = 4, + .max_signal = 4, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "uart3_tx", + .min_signal = 5, + .max_signal = 5, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "uart4_rx", + .min_signal = 6, + .max_signal = 6, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "uart4_tx", + .min_signal = 7, + .max_signal = 7, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "uart5_rx", + .min_signal = 8, + .max_signal = 8, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "uart5_tx", + .min_signal = 9, + .max_signal = 9, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "ras5_rx", + .min_signal = 10, + .max_signal = 10, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "ras5_tx", + .min_signal = 11, + .max_signal = 11, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "ras6_rx", + .min_signal = 12, + .max_signal = 12, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "ras6_tx", + .min_signal = 13, + .max_signal = 13, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "ras7_rx", + .min_signal = 14, + .max_signal = 14, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "ras7_tx", + .min_signal = 15, + .max_signal = 15, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, +}; + /* uart devices plat data */ static struct amba_pl011_data spear310_uart_data[] = { { @@ -313,6 +500,8 @@ static struct amba_pl011_data spear310_uart_data[] = { static struct of_dev_auxdata spear310_auxdata_lookup[] __initdata = { OF_DEV_AUXDATA("arm,pl022", SPEAR3XX_ICM1_SSP_BASE, NULL, &pl022_plat_data), + OF_DEV_AUXDATA("arm,pl080", SPEAR3XX_ICM3_DMA_BASE, NULL, + &pl080_plat_data), OF_DEV_AUXDATA("arm,pl011", SPEAR310_UART1_BASE, NULL, &spear310_uart_data[0]), OF_DEV_AUXDATA("arm,pl011", SPEAR310_UART2_BASE, NULL, @@ -331,6 +520,9 @@ static void __init spear310_dt_init(void) void __iomem *base; int ret = 0; + pl080_plat_data.slave_channels = spear310_dma_info; + pl080_plat_data.num_slave_channels = ARRAY_SIZE(spear310_dma_info); + of_platform_populate(NULL, of_default_bus_match_table, spear310_auxdata_lookup, NULL); diff --git a/arch/arm/mach-spear3xx/spear320.c b/arch/arm/mach-spear3xx/spear320.c index 9c571d0f20c3..1e74031e1213 100644 --- a/arch/arm/mach-spear3xx/spear320.c +++ b/arch/arm/mach-spear3xx/spear320.c @@ -535,6 +535,193 @@ static struct pmx_dev *spear320_evb_pmx_devs[] = { &spear320_pmx_mii1, }; +/* DMAC platform data's slave info */ +struct pl08x_channel_data spear320_dma_info[] = { + { + .bus_id = "uart0_rx", + .min_signal = 2, + .max_signal = 2, + .muxval = 0, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "uart0_tx", + .min_signal = 3, + .max_signal = 3, + .muxval = 0, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "ssp0_rx", + .min_signal = 8, + .max_signal = 8, + .muxval = 0, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "ssp0_tx", + .min_signal = 9, + .max_signal = 9, + .muxval = 0, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "i2c0_rx", + .min_signal = 10, + .max_signal = 10, + .muxval = 0, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "i2c0_tx", + .min_signal = 11, + .max_signal = 11, + .muxval = 0, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "irda", + .min_signal = 12, + .max_signal = 12, + .muxval = 0, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "adc", + .min_signal = 13, + .max_signal = 13, + .muxval = 0, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "to_jpeg", + .min_signal = 14, + .max_signal = 14, + .muxval = 0, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "from_jpeg", + .min_signal = 15, + .max_signal = 15, + .muxval = 0, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "ssp1_rx", + .min_signal = 0, + .max_signal = 0, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "ssp1_tx", + .min_signal = 1, + .max_signal = 1, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "ssp2_rx", + .min_signal = 2, + .max_signal = 2, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "ssp2_tx", + .min_signal = 3, + .max_signal = 3, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "uart1_rx", + .min_signal = 4, + .max_signal = 4, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "uart1_tx", + .min_signal = 5, + .max_signal = 5, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "uart2_rx", + .min_signal = 6, + .max_signal = 6, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "uart2_tx", + .min_signal = 7, + .max_signal = 7, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "i2c1_rx", + .min_signal = 8, + .max_signal = 8, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "i2c1_tx", + .min_signal = 9, + .max_signal = 9, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "i2c2_rx", + .min_signal = 10, + .max_signal = 10, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "i2c2_tx", + .min_signal = 11, + .max_signal = 11, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "i2s_rx", + .min_signal = 12, + .max_signal = 12, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "i2s_tx", + .min_signal = 13, + .max_signal = 13, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "rs485_rx", + .min_signal = 14, + .max_signal = 14, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "rs485_tx", + .min_signal = 15, + .max_signal = 15, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB2, + }, +}; + static struct pl022_ssp_controller spear320_ssp_data[] = { { .bus_id = 1, @@ -569,6 +756,8 @@ static struct amba_pl011_data spear320_uart_data[] = { static struct of_dev_auxdata spear320_auxdata_lookup[] __initdata = { OF_DEV_AUXDATA("arm,pl022", SPEAR3XX_ICM1_SSP_BASE, NULL, &pl022_plat_data), + OF_DEV_AUXDATA("arm,pl080", SPEAR3XX_ICM3_DMA_BASE, NULL, + &pl080_plat_data), OF_DEV_AUXDATA("arm,pl022", SPEAR320_SSP0_BASE, NULL, &spear320_ssp_data[0]), OF_DEV_AUXDATA("arm,pl022", SPEAR320_SSP1_BASE, NULL, @@ -585,6 +774,9 @@ static void __init spear320_dt_init(void) void __iomem *base; int ret = 0; + pl080_plat_data.slave_channels = spear320_dma_info; + pl080_plat_data.num_slave_channels = ARRAY_SIZE(spear320_dma_info); + of_platform_populate(NULL, of_default_bus_match_table, spear320_auxdata_lookup, NULL); diff --git a/arch/arm/mach-spear3xx/spear3xx.c b/arch/arm/mach-spear3xx/spear3xx.c index a94d8c12ed99..17d4ac9a95e1 100644 --- a/arch/arm/mach-spear3xx/spear3xx.c +++ b/arch/arm/mach-spear3xx/spear3xx.c @@ -17,7 +17,9 @@ #include #include #include +#include #include +#include #include #include @@ -465,6 +467,23 @@ struct pl022_ssp_controller pl022_plat_data = { .num_chipselect = 2, }; +/* dmac device registration */ +struct pl08x_platform_data pl080_plat_data = { + .memcpy_channel = { + .bus_id = "memcpy", + .cctl = (PL080_BSIZE_16 << PL080_CONTROL_SB_SIZE_SHIFT | \ + PL080_BSIZE_16 << PL080_CONTROL_DB_SIZE_SHIFT | \ + PL080_WIDTH_32BIT << PL080_CONTROL_SWIDTH_SHIFT | \ + PL080_WIDTH_32BIT << PL080_CONTROL_DWIDTH_SHIFT | \ + PL080_CONTROL_PROT_BUFF | PL080_CONTROL_PROT_CACHE | \ + PL080_CONTROL_PROT_SYS), + }, + .lli_buses = PL08X_AHB1, + .mem_buses = PL08X_AHB1, + .get_signal = pl080_get_signal, + .put_signal = pl080_put_signal, +}; + /* * Following will create 16MB static virtual/physical mappings * PHYSICAL VIRTUAL diff --git a/arch/arm/mach-spear6xx/clock.c b/arch/arm/mach-spear6xx/clock.c index 5a469800b142..adadef2b27b4 100644 --- a/arch/arm/mach-spear6xx/clock.c +++ b/arch/arm/mach-spear6xx/clock.c @@ -657,7 +657,7 @@ static struct clk_lookup spear_clk_lookups[] = { /* clock derived from ahb clk */ CLKDEV_INIT(NULL, "apb_clk", &apb_clk), CLKDEV_INIT("d0200000.i2c", NULL, &i2c_clk), - CLKDEV_INIT("dma", NULL, &dma_clk), + CLKDEV_INIT("fc400000.dma", NULL, &dma_clk), CLKDEV_INIT("jpeg", NULL, &jpeg_clk), CLKDEV_INIT("gmac", NULL, &gmac_clk), CLKDEV_INIT("fc000000.flash", NULL, &smi_clk), diff --git a/arch/arm/mach-spear6xx/spear6xx.c b/arch/arm/mach-spear6xx/spear6xx.c index 2ed8b14c82c8..5b9e30f54cdb 100644 --- a/arch/arm/mach-spear6xx/spear6xx.c +++ b/arch/arm/mach-spear6xx/spear6xx.c @@ -13,15 +13,377 @@ * warranty of any kind, whether express or implied. */ +#include #include #include #include #include +#include #include #include +#include #include #include +/* dmac device registration */ +static struct pl08x_channel_data spear600_dma_info[] = { + { + .bus_id = "ssp1_rx", + .min_signal = 0, + .max_signal = 0, + .muxval = 0, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "ssp1_tx", + .min_signal = 1, + .max_signal = 1, + .muxval = 0, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "uart0_rx", + .min_signal = 2, + .max_signal = 2, + .muxval = 0, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "uart0_tx", + .min_signal = 3, + .max_signal = 3, + .muxval = 0, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "uart1_rx", + .min_signal = 4, + .max_signal = 4, + .muxval = 0, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "uart1_tx", + .min_signal = 5, + .max_signal = 5, + .muxval = 0, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "ssp2_rx", + .min_signal = 6, + .max_signal = 6, + .muxval = 0, + .cctl = 0, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "ssp2_tx", + .min_signal = 7, + .max_signal = 7, + .muxval = 0, + .cctl = 0, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "ssp0_rx", + .min_signal = 8, + .max_signal = 8, + .muxval = 0, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "ssp0_tx", + .min_signal = 9, + .max_signal = 9, + .muxval = 0, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "i2c_rx", + .min_signal = 10, + .max_signal = 10, + .muxval = 0, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "i2c_tx", + .min_signal = 11, + .max_signal = 11, + .muxval = 0, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "irda", + .min_signal = 12, + .max_signal = 12, + .muxval = 0, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "adc", + .min_signal = 13, + .max_signal = 13, + .muxval = 0, + .cctl = 0, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "to_jpeg", + .min_signal = 14, + .max_signal = 14, + .muxval = 0, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "from_jpeg", + .min_signal = 15, + .max_signal = 15, + .muxval = 0, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "ras0_rx", + .min_signal = 0, + .max_signal = 0, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "ras0_tx", + .min_signal = 1, + .max_signal = 1, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "ras1_rx", + .min_signal = 2, + .max_signal = 2, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "ras1_tx", + .min_signal = 3, + .max_signal = 3, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "ras2_rx", + .min_signal = 4, + .max_signal = 4, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "ras2_tx", + .min_signal = 5, + .max_signal = 5, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "ras3_rx", + .min_signal = 6, + .max_signal = 6, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "ras3_tx", + .min_signal = 7, + .max_signal = 7, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "ras4_rx", + .min_signal = 8, + .max_signal = 8, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "ras4_tx", + .min_signal = 9, + .max_signal = 9, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "ras5_rx", + .min_signal = 10, + .max_signal = 10, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "ras5_tx", + .min_signal = 11, + .max_signal = 11, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "ras6_rx", + .min_signal = 12, + .max_signal = 12, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "ras6_tx", + .min_signal = 13, + .max_signal = 13, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "ras7_rx", + .min_signal = 14, + .max_signal = 14, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "ras7_tx", + .min_signal = 15, + .max_signal = 15, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "ext0_rx", + .min_signal = 0, + .max_signal = 0, + .muxval = 2, + .cctl = 0, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "ext0_tx", + .min_signal = 1, + .max_signal = 1, + .muxval = 2, + .cctl = 0, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "ext1_rx", + .min_signal = 2, + .max_signal = 2, + .muxval = 2, + .cctl = 0, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "ext1_tx", + .min_signal = 3, + .max_signal = 3, + .muxval = 2, + .cctl = 0, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "ext2_rx", + .min_signal = 4, + .max_signal = 4, + .muxval = 2, + .cctl = 0, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "ext2_tx", + .min_signal = 5, + .max_signal = 5, + .muxval = 2, + .cctl = 0, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "ext3_rx", + .min_signal = 6, + .max_signal = 6, + .muxval = 2, + .cctl = 0, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "ext3_tx", + .min_signal = 7, + .max_signal = 7, + .muxval = 2, + .cctl = 0, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "ext4_rx", + .min_signal = 8, + .max_signal = 8, + .muxval = 2, + .cctl = 0, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "ext4_tx", + .min_signal = 9, + .max_signal = 9, + .muxval = 2, + .cctl = 0, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "ext5_rx", + .min_signal = 10, + .max_signal = 10, + .muxval = 2, + .cctl = 0, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "ext5_tx", + .min_signal = 11, + .max_signal = 11, + .muxval = 2, + .cctl = 0, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "ext6_rx", + .min_signal = 12, + .max_signal = 12, + .muxval = 2, + .cctl = 0, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "ext6_tx", + .min_signal = 13, + .max_signal = 13, + .muxval = 2, + .cctl = 0, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "ext7_rx", + .min_signal = 14, + .max_signal = 14, + .muxval = 2, + .cctl = 0, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "ext7_tx", + .min_signal = 15, + .max_signal = 15, + .muxval = 2, + .cctl = 0, + .periph_buses = PL08X_AHB2, + }, +}; + +struct pl08x_platform_data pl080_plat_data = { + .memcpy_channel = { + .bus_id = "memcpy", + .cctl = (PL080_BSIZE_16 << PL080_CONTROL_SB_SIZE_SHIFT | \ + PL080_BSIZE_16 << PL080_CONTROL_DB_SIZE_SHIFT | \ + PL080_WIDTH_32BIT << PL080_CONTROL_SWIDTH_SHIFT | \ + PL080_WIDTH_32BIT << PL080_CONTROL_DWIDTH_SHIFT | \ + PL080_CONTROL_PROT_BUFF | PL080_CONTROL_PROT_CACHE | \ + PL080_CONTROL_PROT_SYS), + }, + .lli_buses = PL08X_AHB1, + .mem_buses = PL08X_AHB1, + .get_signal = pl080_get_signal, + .put_signal = pl080_put_signal, + .slave_channels = spear600_dma_info, + .num_slave_channels = ARRAY_SIZE(spear600_dma_info), +}; + /* Following will create static virtual/physical mappings */ static struct map_desc spear6xx_io_desc[] __initdata = { { @@ -92,9 +454,17 @@ struct sys_timer spear6xx_timer = { .init = spear6xx_timer_init, }; +/* Add auxdata to pass platform data */ +struct of_dev_auxdata spear6xx_auxdata_lookup[] __initdata = { + OF_DEV_AUXDATA("arm,pl080", SPEAR6XX_ICM3_DMA_BASE, NULL, + &pl080_plat_data), + {} +}; + static void __init spear600_dt_init(void) { - of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); + of_platform_populate(NULL, of_default_bus_match_table, + spear6xx_auxdata_lookup, NULL); } static const char *spear600_dt_board_compat[] = { diff --git a/arch/arm/plat-spear/Makefile b/arch/arm/plat-spear/Makefile index e0f2e5b9530c..4af6258d0fee 100644 --- a/arch/arm/plat-spear/Makefile +++ b/arch/arm/plat-spear/Makefile @@ -3,6 +3,6 @@ # # Common support -obj-y := clock.o restart.o time.o +obj-y := clock.o restart.o time.o pl080.o obj-$(CONFIG_ARCH_SPEAR3XX) += shirq.o padmux.o diff --git a/arch/arm/plat-spear/include/plat/pl080.h b/arch/arm/plat-spear/include/plat/pl080.h new file mode 100644 index 000000000000..e14a3e4932f9 --- /dev/null +++ b/arch/arm/plat-spear/include/plat/pl080.h @@ -0,0 +1,21 @@ +/* + * arch/arm/plat-spear/include/plat/pl080.h + * + * DMAC pl080 definitions for SPEAr platform + * + * Copyright (C) 2012 ST Microelectronics + * Viresh Kumar + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __PLAT_PL080_H +#define __PLAT_PL080_H + +struct pl08x_dma_chan; +int pl080_get_signal(struct pl08x_dma_chan *ch); +void pl080_put_signal(struct pl08x_dma_chan *ch); + +#endif /* __PLAT_PL080_H */ diff --git a/arch/arm/plat-spear/pl080.c b/arch/arm/plat-spear/pl080.c new file mode 100644 index 000000000000..d53d75e1af5e --- /dev/null +++ b/arch/arm/plat-spear/pl080.c @@ -0,0 +1,79 @@ +/* + * arch/arm/plat-spear/pl080.c + * + * DMAC pl080 definitions for SPEAr platform + * + * Copyright (C) 2012 ST Microelectronics + * Viresh Kumar + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include +#include +#include +#include +#include +#include +#include + +static spinlock_t lock = __SPIN_LOCK_UNLOCKED(x); + +struct { + unsigned char busy; + unsigned char val; +} signals[16] = {{0, 0}, }; + +int pl080_get_signal(struct pl08x_dma_chan *ch) +{ + const struct pl08x_channel_data *cd = ch->cd; + unsigned int signal = cd->min_signal, val; + unsigned long flags; + + spin_lock_irqsave(&lock, flags); + + /* Return if signal is already acquired by somebody else */ + if (signals[signal].busy && + (signals[signal].val != cd->muxval)) { + spin_unlock_irqrestore(&lock, flags); + return -EBUSY; + } + + /* If acquiring for the first time, configure it */ + if (!signals[signal].busy) { + val = readl(DMA_CHN_CFG); + + /* + * Each request line has two bits in DMA_CHN_CFG register. To + * goto the bits of current request line, do left shift of + * value by 2 * signal number. + */ + val &= ~(0x3 << (signal * 2)); + val |= cd->muxval << (signal * 2); + writel(val, DMA_CHN_CFG); + } + + signals[signal].busy++; + signals[signal].val = cd->muxval; + spin_unlock_irqrestore(&lock, flags); + + return signal; +} + +void pl080_put_signal(struct pl08x_dma_chan *ch) +{ + const struct pl08x_channel_data *cd = ch->cd; + unsigned long flags; + + spin_lock_irqsave(&lock, flags); + + /* if signal is not used */ + if (!signals[cd->min_signal].busy) + BUG(); + + signals[cd->min_signal].busy--; + + spin_unlock_irqrestore(&lock, flags); +} -- cgit v1.2.3 From f3215b427bec2add8b5c776e8f50c3ba35b0e8f1 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Wed, 21 Mar 2012 09:18:03 +0530 Subject: SPEAr: Update defconfigs Recently device tree support is added for SPEAr3xx & SPEAr6xx and we must upgrade defconfig for that to get compiled. This patches does it. There are few more rearrangements done in defconfig automatically, when i run make savedefconfig. Signed-off-by: Viresh Kumar --- arch/arm/configs/spear3xx_defconfig | 52 +++++++++++++++++++++++++++++-------- arch/arm/configs/spear6xx_defconfig | 41 +++++++++++++++++++++++------ 2 files changed, 74 insertions(+), 19 deletions(-) diff --git a/arch/arm/configs/spear3xx_defconfig b/arch/arm/configs/spear3xx_defconfig index fea7e1f026a3..7ed42912d69a 100644 --- a/arch/arm/configs/spear3xx_defconfig +++ b/arch/arm/configs/spear3xx_defconfig @@ -2,33 +2,67 @@ CONFIG_EXPERIMENTAL=y CONFIG_SYSVIPC=y CONFIG_BSD_PROCESS_ACCT=y CONFIG_BLK_DEV_INITRD=y -CONFIG_KALLSYMS_EXTRA_PASS=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_MODVERSIONS=y +CONFIG_PARTITION_ADVANCED=y CONFIG_PLAT_SPEAR=y -CONFIG_BOARD_SPEAR300_EVB=y -CONFIG_BOARD_SPEAR310_EVB=y -CONFIG_BOARD_SPEAR320_EVB=y +CONFIG_MACH_SPEAR300=y +CONFIG_MACH_SPEAR310=y +CONFIG_MACH_SPEAR320=y CONFIG_BINFMT_MISC=y +CONFIG_NET=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_MTD=y +CONFIG_MTD_NAND=y +CONFIG_MTD_NAND_FSMC=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=16384 +CONFIG_NETDEVICES=y +# CONFIG_NET_VENDOR_BROADCOM is not set +# CONFIG_NET_VENDOR_CIRRUS is not set +# CONFIG_NET_VENDOR_FARADAY is not set +# CONFIG_NET_VENDOR_INTEL is not set +# CONFIG_NET_VENDOR_MICREL is not set +# CONFIG_NET_VENDOR_NATSEMI is not set +# CONFIG_NET_VENDOR_SEEQ is not set +# CONFIG_NET_VENDOR_SMSC is not set +CONFIG_STMMAC_ETH=y +# CONFIG_WLAN is not set CONFIG_INPUT_FF_MEMLESS=y # CONFIG_INPUT_MOUSEDEV_PSAUX is not set -# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_KEYBOARD_ATKBD is not set +CONFIG_KEYBOARD_SPEAR=y # CONFIG_INPUT_MOUSE is not set +# CONFIG_LEGACY_PTYS is not set CONFIG_SERIAL_AMBA_PL011=y CONFIG_SERIAL_AMBA_PL011_CONSOLE=y -# CONFIG_LEGACY_PTYS is not set # CONFIG_HW_RANDOM is not set CONFIG_RAW_DRIVER=y CONFIG_MAX_RAW_DEVS=8192 +CONFIG_I2C=y +CONFIG_I2C_DESIGNWARE_PLATFORM=y +CONFIG_SPI=y +CONFIG_SPI_PL022=y CONFIG_GPIO_SYSFS=y CONFIG_GPIO_PL061=y # CONFIG_HWMON is not set +CONFIG_WATCHDOG=y +CONFIG_ARM_SP805_WATCHDOG=y +CONFIG_FB=y +CONFIG_FB_ARMCLCD=y # CONFIG_HID_SUPPORT is not set -# CONFIG_USB_SUPPORT is not set +CONFIG_USB=y +# CONFIG_USB_DEVICE_CLASS is not set +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_OHCI_HCD=y +CONFIG_MMC=y +CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_SPEAR=y +CONFIG_RTC_CLASS=y +CONFIG_DMADEVICES=y +CONFIG_AMBA_PL08X=y +CONFIG_DMATEST=m CONFIG_EXT2_FS=y CONFIG_EXT2_FS_XATTR=y CONFIG_EXT2_FS_SECURITY=y @@ -39,8 +73,6 @@ CONFIG_MSDOS_FS=m CONFIG_VFAT_FS=m CONFIG_FAT_DEFAULT_IOCHARSET="ascii" CONFIG_TMPFS=y -CONFIG_PARTITION_ADVANCED=y -CONFIG_NLS=y CONFIG_NLS_DEFAULT="utf8" CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_ASCII=m @@ -48,6 +80,4 @@ CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_FS=y CONFIG_DEBUG_KERNEL=y CONFIG_DEBUG_SPINLOCK=y -CONFIG_DEBUG_SPINLOCK_SLEEP=y CONFIG_DEBUG_INFO=y -# CONFIG_CRC32 is not set diff --git a/arch/arm/configs/spear6xx_defconfig b/arch/arm/configs/spear6xx_defconfig index cef2e836afd2..cf94bc73a0e0 100644 --- a/arch/arm/configs/spear6xx_defconfig +++ b/arch/arm/configs/spear6xx_defconfig @@ -2,29 +2,58 @@ CONFIG_EXPERIMENTAL=y CONFIG_SYSVIPC=y CONFIG_BSD_PROCESS_ACCT=y CONFIG_BLK_DEV_INITRD=y -CONFIG_KALLSYMS_EXTRA_PASS=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_MODVERSIONS=y +CONFIG_PARTITION_ADVANCED=y CONFIG_PLAT_SPEAR=y CONFIG_ARCH_SPEAR6XX=y -CONFIG_BOARD_SPEAR600_EVB=y +CONFIG_BOARD_SPEAR600_DT=y CONFIG_BINFMT_MISC=y +CONFIG_NET=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_MTD=y +CONFIG_MTD_NAND=y +CONFIG_MTD_NAND_FSMC=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=16384 +CONFIG_NETDEVICES=y +# CONFIG_NET_VENDOR_BROADCOM is not set +# CONFIG_NET_VENDOR_CIRRUS is not set +# CONFIG_NET_VENDOR_FARADAY is not set +# CONFIG_NET_VENDOR_INTEL is not set +# CONFIG_NET_VENDOR_MICREL is not set +# CONFIG_NET_VENDOR_NATSEMI is not set +# CONFIG_NET_VENDOR_SEEQ is not set +# CONFIG_NET_VENDOR_SMSC is not set +CONFIG_STMMAC_ETH=y +# CONFIG_WLAN is not set CONFIG_INPUT_FF_MEMLESS=y # CONFIG_INPUT_MOUSEDEV_PSAUX is not set +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_LEGACY_PTYS is not set CONFIG_SERIAL_AMBA_PL011=y CONFIG_SERIAL_AMBA_PL011_CONSOLE=y -# CONFIG_LEGACY_PTYS is not set CONFIG_RAW_DRIVER=y CONFIG_MAX_RAW_DEVS=8192 +CONFIG_I2C=y +CONFIG_I2C_DESIGNWARE_PLATFORM=y +CONFIG_SPI=y +CONFIG_SPI_PL022=y CONFIG_GPIO_SYSFS=y CONFIG_GPIO_PL061=y # CONFIG_HWMON is not set +CONFIG_WATCHDOG=y +CONFIG_ARM_SP805_WATCHDOG=y # CONFIG_HID_SUPPORT is not set -# CONFIG_USB_SUPPORT is not set +CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_OHCI_HCD=y +CONFIG_RTC_CLASS=y +CONFIG_DMADEVICES=y +CONFIG_AMBA_PL08X=y +CONFIG_DMATEST=m CONFIG_EXT2_FS=y CONFIG_EXT2_FS_XATTR=y CONFIG_EXT2_FS_SECURITY=y @@ -35,8 +64,6 @@ CONFIG_MSDOS_FS=m CONFIG_VFAT_FS=m CONFIG_FAT_DEFAULT_IOCHARSET="ascii" CONFIG_TMPFS=y -CONFIG_PARTITION_ADVANCED=y -CONFIG_NLS=y CONFIG_NLS_DEFAULT="utf8" CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_ASCII=m @@ -44,6 +71,4 @@ CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_FS=y CONFIG_DEBUG_KERNEL=y CONFIG_DEBUG_SPINLOCK=y -CONFIG_DEBUG_SPINLOCK_SLEEP=y CONFIG_DEBUG_INFO=y -# CONFIG_CRC32 is not set -- cgit v1.2.3 From 5019f0b1345b8f6a8e8a0c7c2f89d4a31819a317 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Wed, 11 Apr 2012 17:30:11 +0000 Subject: ARM: spear: remove most mach/*.h header contents The register and irq definitions in mach/*.h for spear3xx and spear6xx are now mostly obsolete, after the platforms have been converted to device tree based probing and the data is now part of the device tree files. The misc_regs.h contents are moved into clock.c because that is the only user, aside from the DMA_CHN_CFG that should eventually get handled differently. Some of the contents of mach/spear.h still remain, because they are used to set up the static map table, timer, uart and auxdata tables, but almost everything got removed. We might remove everything but the map table as the DT conversion completes, but that is not a priority. I've also made sure to make both copies of spear.h more or less identical so we can eventually combine them. The spear3?0.h files were only used by the spear3?0.c files, so I merged the contents in there and removed the bits that were unused. This is something that should still be looked at. Signed-off-by: Arnd Bergmann Acked-by: Viresh Kumar --- arch/arm/mach-spear3xx/clock.c | 98 +++++++++++++++ arch/arm/mach-spear3xx/include/mach/generic.h | 11 +- arch/arm/mach-spear3xx/include/mach/hardware.h | 21 +--- arch/arm/mach-spear3xx/include/mach/irqs.h | 130 +------------------- arch/arm/mach-spear3xx/include/mach/misc_regs.h | 144 ---------------------- arch/arm/mach-spear3xx/include/mach/spear.h | 38 +----- arch/arm/mach-spear3xx/include/mach/spear300.h | 54 --------- arch/arm/mach-spear3xx/include/mach/spear310.h | 58 --------- arch/arm/mach-spear3xx/include/mach/spear320.h | 67 ----------- arch/arm/mach-spear3xx/spear300.c | 41 ++++++- arch/arm/mach-spear3xx/spear310.c | 62 +++++++++- arch/arm/mach-spear3xx/spear320.c | 62 +++++++++- arch/arm/mach-spear3xx/spear3xx.c | 4 +- arch/arm/mach-spear6xx/clock.c | 106 ++++++++++++++++ arch/arm/mach-spear6xx/include/mach/generic.h | 29 +---- arch/arm/mach-spear6xx/include/mach/hardware.h | 24 +--- arch/arm/mach-spear6xx/include/mach/irqs.h | 75 +----------- arch/arm/mach-spear6xx/include/mach/misc_regs.h | 154 ------------------------ arch/arm/mach-spear6xx/include/mach/spear.h | 55 +-------- arch/arm/mach-spear6xx/include/mach/spear600.h | 21 ---- arch/arm/mach-spear6xx/spear6xx.c | 49 ++++---- arch/arm/plat-spear/include/plat/debug-macro.S | 2 +- arch/arm/plat-spear/include/plat/hardware.h | 17 --- arch/arm/plat-spear/include/plat/uncompress.h | 2 +- arch/arm/plat-spear/pl080.c | 1 + arch/arm/plat-spear/restart.c | 2 +- arch/arm/plat-spear/time.c | 17 ++- drivers/of/address.c | 1 + 28 files changed, 424 insertions(+), 921 deletions(-) delete mode 100644 arch/arm/mach-spear3xx/include/mach/spear300.h delete mode 100644 arch/arm/mach-spear3xx/include/mach/spear310.h delete mode 100644 arch/arm/mach-spear3xx/include/mach/spear320.h delete mode 100644 arch/arm/mach-spear6xx/include/mach/spear600.h delete mode 100644 arch/arm/plat-spear/include/plat/hardware.h diff --git a/arch/arm/mach-spear3xx/clock.c b/arch/arm/mach-spear3xx/clock.c index eeafe38eab25..cd6c11099083 100644 --- a/arch/arm/mach-spear3xx/clock.c +++ b/arch/arm/mach-spear3xx/clock.c @@ -19,6 +19,104 @@ #include #include #include +#include + +#define PLL1_CTR (MISC_BASE + 0x008) +#define PLL1_FRQ (MISC_BASE + 0x00C) +#define PLL1_MOD (MISC_BASE + 0x010) +#define PLL2_CTR (MISC_BASE + 0x014) +/* PLL_CTR register masks */ +#define PLL_ENABLE 2 +#define PLL_MODE_SHIFT 4 +#define PLL_MODE_MASK 0x3 +#define PLL_MODE_NORMAL 0 +#define PLL_MODE_FRACTION 1 +#define PLL_MODE_DITH_DSB 2 +#define PLL_MODE_DITH_SSB 3 + +#define PLL2_FRQ (MISC_BASE + 0x018) +/* PLL FRQ register masks */ +#define PLL_DIV_N_SHIFT 0 +#define PLL_DIV_N_MASK 0xFF +#define PLL_DIV_P_SHIFT 8 +#define PLL_DIV_P_MASK 0x7 +#define PLL_NORM_FDBK_M_SHIFT 24 +#define PLL_NORM_FDBK_M_MASK 0xFF +#define PLL_DITH_FDBK_M_SHIFT 16 +#define PLL_DITH_FDBK_M_MASK 0xFFFF + +#define PLL2_MOD (MISC_BASE + 0x01C) +#define PLL_CLK_CFG (MISC_BASE + 0x020) +#define CORE_CLK_CFG (MISC_BASE + 0x024) +/* CORE CLK CFG register masks */ +#define PLL_HCLK_RATIO_SHIFT 10 +#define PLL_HCLK_RATIO_MASK 0x3 +#define HCLK_PCLK_RATIO_SHIFT 8 +#define HCLK_PCLK_RATIO_MASK 0x3 + +#define PERIP_CLK_CFG (MISC_BASE + 0x028) +/* PERIP_CLK_CFG register masks */ +#define UART_CLK_SHIFT 4 +#define UART_CLK_MASK 0x1 +#define FIRDA_CLK_SHIFT 5 +#define FIRDA_CLK_MASK 0x3 +#define GPT0_CLK_SHIFT 8 +#define GPT1_CLK_SHIFT 11 +#define GPT2_CLK_SHIFT 12 +#define GPT_CLK_MASK 0x1 +#define AUX_CLK_PLL3_VAL 0 +#define AUX_CLK_PLL1_VAL 1 + +#define PERIP1_CLK_ENB (MISC_BASE + 0x02C) +/* PERIP1_CLK_ENB register masks */ +#define UART_CLK_ENB 3 +#define SSP_CLK_ENB 5 +#define I2C_CLK_ENB 7 +#define JPEG_CLK_ENB 8 +#define FIRDA_CLK_ENB 10 +#define GPT1_CLK_ENB 11 +#define GPT2_CLK_ENB 12 +#define ADC_CLK_ENB 15 +#define RTC_CLK_ENB 17 +#define GPIO_CLK_ENB 18 +#define DMA_CLK_ENB 19 +#define SMI_CLK_ENB 21 +#define GMAC_CLK_ENB 23 +#define USBD_CLK_ENB 24 +#define USBH_CLK_ENB 25 +#define C3_CLK_ENB 31 + +#define RAS_CLK_ENB (MISC_BASE + 0x034) + +#define PRSC1_CLK_CFG (MISC_BASE + 0x044) +#define PRSC2_CLK_CFG (MISC_BASE + 0x048) +#define PRSC3_CLK_CFG (MISC_BASE + 0x04C) +/* gpt synthesizer register masks */ +#define GPT_MSCALE_SHIFT 0 +#define GPT_MSCALE_MASK 0xFFF +#define GPT_NSCALE_SHIFT 12 +#define GPT_NSCALE_MASK 0xF + +#define AMEM_CLK_CFG (MISC_BASE + 0x050) +#define EXPI_CLK_CFG (MISC_BASE + 0x054) +#define CLCD_CLK_SYNT (MISC_BASE + 0x05C) +#define FIRDA_CLK_SYNT (MISC_BASE + 0x060) +#define UART_CLK_SYNT (MISC_BASE + 0x064) +#define GMAC_CLK_SYNT (MISC_BASE + 0x068) +#define RAS1_CLK_SYNT (MISC_BASE + 0x06C) +#define RAS2_CLK_SYNT (MISC_BASE + 0x070) +#define RAS3_CLK_SYNT (MISC_BASE + 0x074) +#define RAS4_CLK_SYNT (MISC_BASE + 0x078) +/* aux clk synthesiser register masks for irda to ras4 */ +#define AUX_SYNT_ENB 31 +#define AUX_EQ_SEL_SHIFT 30 +#define AUX_EQ_SEL_MASK 1 +#define AUX_EQ1_SEL 0 +#define AUX_EQ2_SEL 1 +#define AUX_XSCALE_SHIFT 16 +#define AUX_XSCALE_MASK 0xFFF +#define AUX_YSCALE_SHIFT 0 +#define AUX_YSCALE_MASK 0xFFF /* root clks */ /* 32 KHz oscillator clock */ diff --git a/arch/arm/mach-spear3xx/include/mach/generic.h b/arch/arm/mach-spear3xx/include/mach/generic.h index a7569584cbe8..e4f4d721cda2 100644 --- a/arch/arm/mach-spear3xx/include/mach/generic.h +++ b/arch/arm/mach-spear3xx/include/mach/generic.h @@ -22,22 +22,13 @@ #include #include -/* spear3xx declarations */ -/* - * Each GPT has 2 timer channels - * Following GPT channels will be used as clock source and clockevent - */ -#define SPEAR_GPT0_BASE SPEAR3XX_ML1_TMR_BASE -#define SPEAR_GPT0_CHAN0_IRQ SPEAR3XX_IRQ_CPU_GPT1_1 -#define SPEAR_GPT0_CHAN1_IRQ SPEAR3XX_IRQ_CPU_GPT1_2 - /* Add spear3xx family device structure declarations here */ extern struct sys_timer spear3xx_timer; extern struct pl022_ssp_controller pl022_plat_data; extern struct pl08x_platform_data pl080_plat_data; /* Add spear3xx family function declarations here */ -void __init spear_setup_timer(void); +void __init spear_setup_timer(resource_size_t base, int irq); void __init spear3xx_map_io(void); void __init spear3xx_dt_init_irq(void); diff --git a/arch/arm/mach-spear3xx/include/mach/hardware.h b/arch/arm/mach-spear3xx/include/mach/hardware.h index defa374f5bee..40a8c178f10d 100644 --- a/arch/arm/mach-spear3xx/include/mach/hardware.h +++ b/arch/arm/mach-spear3xx/include/mach/hardware.h @@ -1,20 +1 @@ -/* - * arch/arm/mach-spear3xx/include/mach/hardware.h - * - * Hardware definitions for SPEAr3xx machine family - * - * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __MACH_HARDWARE_H -#define __MACH_HARDWARE_H - -#include -#include - -#endif /* __MACH_HARDWARE_H */ +/* empty */ diff --git a/arch/arm/mach-spear3xx/include/mach/irqs.h b/arch/arm/mach-spear3xx/include/mach/irqs.h index 6e265442808e..319620a1afb4 100644 --- a/arch/arm/mach-spear3xx/include/mach/irqs.h +++ b/arch/arm/mach-spear3xx/include/mach/irqs.h @@ -14,141 +14,15 @@ #ifndef __MACH_IRQS_H #define __MACH_IRQS_H -/* SPEAr3xx IRQ definitions */ -#define SPEAR3XX_IRQ_HW_ACCEL_MOD_0 0 +/* FIXME: probe all these from DT */ #define SPEAR3XX_IRQ_INTRCOMM_RAS_ARM 1 #define SPEAR3XX_IRQ_CPU_GPT1_1 2 -#define SPEAR3XX_IRQ_CPU_GPT1_2 3 -#define SPEAR3XX_IRQ_BASIC_GPT1_1 4 -#define SPEAR3XX_IRQ_BASIC_GPT1_2 5 -#define SPEAR3XX_IRQ_BASIC_GPT2_1 6 -#define SPEAR3XX_IRQ_BASIC_GPT2_2 7 -#define SPEAR3XX_IRQ_BASIC_DMA 8 -#define SPEAR3XX_IRQ_BASIC_SMI 9 -#define SPEAR3XX_IRQ_BASIC_RTC 10 -#define SPEAR3XX_IRQ_BASIC_GPIO 11 -#define SPEAR3XX_IRQ_BASIC_WDT 12 -#define SPEAR3XX_IRQ_DDR_CONTROLLER 13 -#define SPEAR3XX_IRQ_SYS_ERROR 14 -#define SPEAR3XX_IRQ_WAKEUP_RCV 15 -#define SPEAR3XX_IRQ_JPEG 16 -#define SPEAR3XX_IRQ_IRDA 17 -#define SPEAR3XX_IRQ_ADC 18 -#define SPEAR3XX_IRQ_UART 19 -#define SPEAR3XX_IRQ_SSP 20 -#define SPEAR3XX_IRQ_I2C 21 -#define SPEAR3XX_IRQ_MAC_1 22 -#define SPEAR3XX_IRQ_MAC_2 23 -#define SPEAR3XX_IRQ_USB_DEV 24 -#define SPEAR3XX_IRQ_USB_H_OHCI_0 25 -#define SPEAR3XX_IRQ_USB_H_EHCI_0 26 -#define SPEAR3XX_IRQ_USB_H_EHCI_1 SPEAR3XX_IRQ_USB_H_EHCI_0 -#define SPEAR3XX_IRQ_USB_H_OHCI_1 27 #define SPEAR3XX_IRQ_GEN_RAS_1 28 #define SPEAR3XX_IRQ_GEN_RAS_2 29 #define SPEAR3XX_IRQ_GEN_RAS_3 30 -#define SPEAR3XX_IRQ_HW_ACCEL_MOD_1 31 #define SPEAR3XX_IRQ_VIC_END 32 - #define SPEAR3XX_VIRQ_START SPEAR3XX_IRQ_VIC_END -/* SPEAr300 Virtual irq definitions */ -/* IRQs sharing IRQ_GEN_RAS_1 */ -#define SPEAR300_VIRQ_IT_PERS_S (SPEAR3XX_VIRQ_START + 0) -#define SPEAR300_VIRQ_IT_CHANGE_S (SPEAR3XX_VIRQ_START + 1) -#define SPEAR300_VIRQ_I2S (SPEAR3XX_VIRQ_START + 2) -#define SPEAR300_VIRQ_TDM (SPEAR3XX_VIRQ_START + 3) -#define SPEAR300_VIRQ_CAMERA_L (SPEAR3XX_VIRQ_START + 4) -#define SPEAR300_VIRQ_CAMERA_F (SPEAR3XX_VIRQ_START + 5) -#define SPEAR300_VIRQ_CAMERA_V (SPEAR3XX_VIRQ_START + 6) -#define SPEAR300_VIRQ_KEYBOARD (SPEAR3XX_VIRQ_START + 7) -#define SPEAR300_VIRQ_GPIO1 (SPEAR3XX_VIRQ_START + 8) - -/* IRQs sharing IRQ_GEN_RAS_3 */ -#define SPEAR300_IRQ_CLCD SPEAR3XX_IRQ_GEN_RAS_3 - -/* IRQs sharing IRQ_INTRCOMM_RAS_ARM */ -#define SPEAR300_IRQ_SDHCI SPEAR3XX_IRQ_INTRCOMM_RAS_ARM - -/* SPEAr310 Virtual irq definitions */ -/* IRQs sharing IRQ_GEN_RAS_1 */ -#define SPEAR310_VIRQ_SMII0 (SPEAR3XX_VIRQ_START + 0) -#define SPEAR310_VIRQ_SMII1 (SPEAR3XX_VIRQ_START + 1) -#define SPEAR310_VIRQ_SMII2 (SPEAR3XX_VIRQ_START + 2) -#define SPEAR310_VIRQ_SMII3 (SPEAR3XX_VIRQ_START + 3) -#define SPEAR310_VIRQ_WAKEUP_SMII0 (SPEAR3XX_VIRQ_START + 4) -#define SPEAR310_VIRQ_WAKEUP_SMII1 (SPEAR3XX_VIRQ_START + 5) -#define SPEAR310_VIRQ_WAKEUP_SMII2 (SPEAR3XX_VIRQ_START + 6) -#define SPEAR310_VIRQ_WAKEUP_SMII3 (SPEAR3XX_VIRQ_START + 7) - -/* IRQs sharing IRQ_GEN_RAS_2 */ -#define SPEAR310_VIRQ_UART1 (SPEAR3XX_VIRQ_START + 8) -#define SPEAR310_VIRQ_UART2 (SPEAR3XX_VIRQ_START + 9) -#define SPEAR310_VIRQ_UART3 (SPEAR3XX_VIRQ_START + 10) -#define SPEAR310_VIRQ_UART4 (SPEAR3XX_VIRQ_START + 11) -#define SPEAR310_VIRQ_UART5 (SPEAR3XX_VIRQ_START + 12) - -/* IRQs sharing IRQ_GEN_RAS_3 */ -#define SPEAR310_VIRQ_EMI (SPEAR3XX_VIRQ_START + 13) -#define SPEAR310_VIRQ_PLGPIO (SPEAR3XX_VIRQ_START + 14) - -/* IRQs sharing IRQ_INTRCOMM_RAS_ARM */ -#define SPEAR310_VIRQ_TDM_HDLC (SPEAR3XX_VIRQ_START + 15) -#define SPEAR310_VIRQ_RS485_0 (SPEAR3XX_VIRQ_START + 16) -#define SPEAR310_VIRQ_RS485_1 (SPEAR3XX_VIRQ_START + 17) - -/* SPEAr320 Virtual irq definitions */ -/* IRQs sharing IRQ_GEN_RAS_1 */ -#define SPEAR320_VIRQ_EMI (SPEAR3XX_VIRQ_START + 0) -#define SPEAR320_VIRQ_CLCD (SPEAR3XX_VIRQ_START + 1) -#define SPEAR320_VIRQ_SPP (SPEAR3XX_VIRQ_START + 2) - -/* IRQs sharing IRQ_GEN_RAS_2 */ -#define SPEAR320_IRQ_SDHCI SPEAR3XX_IRQ_GEN_RAS_2 - -/* IRQs sharing IRQ_GEN_RAS_3 */ -#define SPEAR320_VIRQ_PLGPIO (SPEAR3XX_VIRQ_START + 3) -#define SPEAR320_VIRQ_I2S_PLAY (SPEAR3XX_VIRQ_START + 4) -#define SPEAR320_VIRQ_I2S_REC (SPEAR3XX_VIRQ_START + 5) - -/* IRQs sharing IRQ_INTRCOMM_RAS_ARM */ -#define SPEAR320_VIRQ_CANU (SPEAR3XX_VIRQ_START + 6) -#define SPEAR320_VIRQ_CANL (SPEAR3XX_VIRQ_START + 7) -#define SPEAR320_VIRQ_UART1 (SPEAR3XX_VIRQ_START + 8) -#define SPEAR320_VIRQ_UART2 (SPEAR3XX_VIRQ_START + 9) -#define SPEAR320_VIRQ_SSP1 (SPEAR3XX_VIRQ_START + 10) -#define SPEAR320_VIRQ_SSP2 (SPEAR3XX_VIRQ_START + 11) -#define SPEAR320_VIRQ_SMII0 (SPEAR3XX_VIRQ_START + 12) -#define SPEAR320_VIRQ_MII1_SMII1 (SPEAR3XX_VIRQ_START + 13) -#define SPEAR320_VIRQ_WAKEUP_SMII0 (SPEAR3XX_VIRQ_START + 14) -#define SPEAR320_VIRQ_WAKEUP_MII1_SMII1 (SPEAR3XX_VIRQ_START + 15) -#define SPEAR320_VIRQ_I2C1 (SPEAR3XX_VIRQ_START + 16) - -/* - * GPIO pins virtual irqs - * Use the lowest number for the GPIO virtual IRQs base on which subarchs - * we have compiled in - */ -#if defined(CONFIG_MACH_SPEAR310) -#define SPEAR3XX_GPIO_INT_BASE (SPEAR3XX_VIRQ_START + 18) -#elif defined(CONFIG_MACH_SPEAR320) -#define SPEAR3XX_GPIO_INT_BASE (SPEAR3XX_VIRQ_START + 17) -#else -#define SPEAR3XX_GPIO_INT_BASE (SPEAR3XX_VIRQ_START + 9) -#endif - -#define SPEAR300_GPIO1_INT_BASE (SPEAR3XX_GPIO_INT_BASE + 8) -#define SPEAR3XX_PLGPIO_COUNT 102 - -#if defined(CONFIG_MACH_SPEAR310) || defined(CONFIG_MACH_SPEAR320) -#define SPEAR3XX_PLGPIO_INT_BASE (SPEAR3XX_GPIO_INT_BASE + 8) -#define SPEAR3XX_GPIO_INT_END (SPEAR3XX_PLGPIO_INT_BASE + \ - SPEAR3XX_PLGPIO_COUNT) -#else -#define SPEAR3XX_GPIO_INT_END (SPEAR300_GPIO1_INT_BASE + 8) -#endif - -#define SPEAR3XX_VIRQ_END SPEAR3XX_GPIO_INT_END -#define NR_IRQS SPEAR3XX_VIRQ_END +#define NR_IRQS 160 #endif /* __MACH_IRQS_H */ diff --git a/arch/arm/mach-spear3xx/include/mach/misc_regs.h b/arch/arm/mach-spear3xx/include/mach/misc_regs.h index 5bd8cd8d4852..e0ab72e61507 100644 --- a/arch/arm/mach-spear3xx/include/mach/misc_regs.h +++ b/arch/arm/mach-spear3xx/include/mach/misc_regs.h @@ -14,151 +14,7 @@ #ifndef __MACH_MISC_REGS_H #define __MACH_MISC_REGS_H -#include - #define MISC_BASE IOMEM(VA_SPEAR3XX_ICM3_MISC_REG_BASE) - -#define SOC_CFG_CTR (MISC_BASE + 0x000) -#define DIAG_CFG_CTR (MISC_BASE + 0x004) -#define PLL1_CTR (MISC_BASE + 0x008) -#define PLL1_FRQ (MISC_BASE + 0x00C) -#define PLL1_MOD (MISC_BASE + 0x010) -#define PLL2_CTR (MISC_BASE + 0x014) -/* PLL_CTR register masks */ -#define PLL_ENABLE 2 -#define PLL_MODE_SHIFT 4 -#define PLL_MODE_MASK 0x3 -#define PLL_MODE_NORMAL 0 -#define PLL_MODE_FRACTION 1 -#define PLL_MODE_DITH_DSB 2 -#define PLL_MODE_DITH_SSB 3 - -#define PLL2_FRQ (MISC_BASE + 0x018) -/* PLL FRQ register masks */ -#define PLL_DIV_N_SHIFT 0 -#define PLL_DIV_N_MASK 0xFF -#define PLL_DIV_P_SHIFT 8 -#define PLL_DIV_P_MASK 0x7 -#define PLL_NORM_FDBK_M_SHIFT 24 -#define PLL_NORM_FDBK_M_MASK 0xFF -#define PLL_DITH_FDBK_M_SHIFT 16 -#define PLL_DITH_FDBK_M_MASK 0xFFFF - -#define PLL2_MOD (MISC_BASE + 0x01C) -#define PLL_CLK_CFG (MISC_BASE + 0x020) -#define CORE_CLK_CFG (MISC_BASE + 0x024) -/* CORE CLK CFG register masks */ -#define PLL_HCLK_RATIO_SHIFT 10 -#define PLL_HCLK_RATIO_MASK 0x3 -#define HCLK_PCLK_RATIO_SHIFT 8 -#define HCLK_PCLK_RATIO_MASK 0x3 - -#define PERIP_CLK_CFG (MISC_BASE + 0x028) -/* PERIP_CLK_CFG register masks */ -#define UART_CLK_SHIFT 4 -#define UART_CLK_MASK 0x1 -#define FIRDA_CLK_SHIFT 5 -#define FIRDA_CLK_MASK 0x3 -#define GPT0_CLK_SHIFT 8 -#define GPT1_CLK_SHIFT 11 -#define GPT2_CLK_SHIFT 12 -#define GPT_CLK_MASK 0x1 -#define AUX_CLK_PLL3_VAL 0 -#define AUX_CLK_PLL1_VAL 1 - -#define PERIP1_CLK_ENB (MISC_BASE + 0x02C) -/* PERIP1_CLK_ENB register masks */ -#define UART_CLK_ENB 3 -#define SSP_CLK_ENB 5 -#define I2C_CLK_ENB 7 -#define JPEG_CLK_ENB 8 -#define FIRDA_CLK_ENB 10 -#define GPT1_CLK_ENB 11 -#define GPT2_CLK_ENB 12 -#define ADC_CLK_ENB 15 -#define RTC_CLK_ENB 17 -#define GPIO_CLK_ENB 18 -#define DMA_CLK_ENB 19 -#define SMI_CLK_ENB 21 -#define GMAC_CLK_ENB 23 -#define USBD_CLK_ENB 24 -#define USBH_CLK_ENB 25 -#define C3_CLK_ENB 31 - -#define SOC_CORE_ID (MISC_BASE + 0x030) -#define RAS_CLK_ENB (MISC_BASE + 0x034) -#define PERIP1_SOF_RST (MISC_BASE + 0x038) -/* PERIP1_SOF_RST register masks */ -#define JPEG_SOF_RST 8 - -#define SOC_USER_ID (MISC_BASE + 0x03C) -#define RAS_SOF_RST (MISC_BASE + 0x040) -#define PRSC1_CLK_CFG (MISC_BASE + 0x044) -#define PRSC2_CLK_CFG (MISC_BASE + 0x048) -#define PRSC3_CLK_CFG (MISC_BASE + 0x04C) -/* gpt synthesizer register masks */ -#define GPT_MSCALE_SHIFT 0 -#define GPT_MSCALE_MASK 0xFFF -#define GPT_NSCALE_SHIFT 12 -#define GPT_NSCALE_MASK 0xF - -#define AMEM_CLK_CFG (MISC_BASE + 0x050) -#define EXPI_CLK_CFG (MISC_BASE + 0x054) -#define CLCD_CLK_SYNT (MISC_BASE + 0x05C) -#define FIRDA_CLK_SYNT (MISC_BASE + 0x060) -#define UART_CLK_SYNT (MISC_BASE + 0x064) -#define GMAC_CLK_SYNT (MISC_BASE + 0x068) -#define RAS1_CLK_SYNT (MISC_BASE + 0x06C) -#define RAS2_CLK_SYNT (MISC_BASE + 0x070) -#define RAS3_CLK_SYNT (MISC_BASE + 0x074) -#define RAS4_CLK_SYNT (MISC_BASE + 0x078) -/* aux clk synthesiser register masks for irda to ras4 */ -#define AUX_SYNT_ENB 31 -#define AUX_EQ_SEL_SHIFT 30 -#define AUX_EQ_SEL_MASK 1 -#define AUX_EQ1_SEL 0 -#define AUX_EQ2_SEL 1 -#define AUX_XSCALE_SHIFT 16 -#define AUX_XSCALE_MASK 0xFFF -#define AUX_YSCALE_SHIFT 0 -#define AUX_YSCALE_MASK 0xFFF - -#define ICM1_ARB_CFG (MISC_BASE + 0x07C) -#define ICM2_ARB_CFG (MISC_BASE + 0x080) -#define ICM3_ARB_CFG (MISC_BASE + 0x084) -#define ICM4_ARB_CFG (MISC_BASE + 0x088) -#define ICM5_ARB_CFG (MISC_BASE + 0x08C) -#define ICM6_ARB_CFG (MISC_BASE + 0x090) -#define ICM7_ARB_CFG (MISC_BASE + 0x094) -#define ICM8_ARB_CFG (MISC_BASE + 0x098) -#define ICM9_ARB_CFG (MISC_BASE + 0x09C) #define DMA_CHN_CFG (MISC_BASE + 0x0A0) -#define USB2_PHY_CFG (MISC_BASE + 0x0A4) -#define GMAC_CFG_CTR (MISC_BASE + 0x0A8) -#define EXPI_CFG_CTR (MISC_BASE + 0x0AC) -#define PRC1_LOCK_CTR (MISC_BASE + 0x0C0) -#define PRC2_LOCK_CTR (MISC_BASE + 0x0C4) -#define PRC3_LOCK_CTR (MISC_BASE + 0x0C8) -#define PRC4_LOCK_CTR (MISC_BASE + 0x0CC) -#define PRC1_IRQ_CTR (MISC_BASE + 0x0D0) -#define PRC2_IRQ_CTR (MISC_BASE + 0x0D4) -#define PRC3_IRQ_CTR (MISC_BASE + 0x0D8) -#define PRC4_IRQ_CTR (MISC_BASE + 0x0DC) -#define PWRDOWN_CFG_CTR (MISC_BASE + 0x0E0) -#define COMPSSTL_1V8_CFG (MISC_BASE + 0x0E4) -#define COMPSSTL_2V5_CFG (MISC_BASE + 0x0E8) -#define COMPCOR_3V3_CFG (MISC_BASE + 0x0EC) -#define SSTLPAD_CFG_CTR (MISC_BASE + 0x0F0) -#define BIST1_CFG_CTR (MISC_BASE + 0x0F4) -#define BIST2_CFG_CTR (MISC_BASE + 0x0F8) -#define BIST3_CFG_CTR (MISC_BASE + 0x0FC) -#define BIST4_CFG_CTR (MISC_BASE + 0x100) -#define BIST5_CFG_CTR (MISC_BASE + 0x104) -#define BIST1_STS_RES (MISC_BASE + 0x108) -#define BIST2_STS_RES (MISC_BASE + 0x10C) -#define BIST3_STS_RES (MISC_BASE + 0x110) -#define BIST4_STS_RES (MISC_BASE + 0x114) -#define BIST5_STS_RES (MISC_BASE + 0x118) -#define SYSERR_CFG_CTR (MISC_BASE + 0x11C) #endif /* __MACH_MISC_REGS_H */ diff --git a/arch/arm/mach-spear3xx/include/mach/spear.h b/arch/arm/mach-spear3xx/include/mach/spear.h index 8e3900aa0d45..6d4dadc67633 100644 --- a/arch/arm/mach-spear3xx/include/mach/spear.h +++ b/arch/arm/mach-spear3xx/include/mach/spear.h @@ -15,61 +15,27 @@ #define __MACH_SPEAR3XX_H #include -#include -#include -#include - -#define SPEAR3XX_ML_SDRAM_BASE UL(0x00000000) - -#define SPEAR3XX_ICM9_BASE UL(0xC0000000) /* ICM1 - Low speed connection */ #define SPEAR3XX_ICM1_2_BASE UL(0xD0000000) #define VA_SPEAR3XX_ICM1_2_BASE UL(0xFD000000) #define SPEAR3XX_ICM1_UART_BASE UL(0xD0000000) #define VA_SPEAR3XX_ICM1_UART_BASE (VA_SPEAR3XX_ICM1_2_BASE | SPEAR3XX_ICM1_UART_BASE) -#define SPEAR3XX_ICM1_ADC_BASE UL(0xD0080000) #define SPEAR3XX_ICM1_SSP_BASE UL(0xD0100000) -#define SPEAR3XX_ICM1_I2C_BASE UL(0xD0180000) -#define SPEAR3XX_ICM1_JPEG_BASE UL(0xD0800000) -#define SPEAR3XX_ICM1_IRDA_BASE UL(0xD1000000) -#define SPEAR3XX_ICM1_SRAM_BASE UL(0xD2800000) - -/* ICM2 - Application Subsystem */ -#define SPEAR3XX_ICM2_HWACCEL0_BASE UL(0xD8800000) -#define SPEAR3XX_ICM2_HWACCEL1_BASE UL(0xD9000000) - -/* ICM4 - High Speed Connection */ -#define SPEAR3XX_ICM4_BASE UL(0xE0000000) -#define SPEAR3XX_ICM4_MII_BASE UL(0xE0800000) -#define SPEAR3XX_ICM4_USBD_FIFO_BASE UL(0xE1000000) -#define SPEAR3XX_ICM4_USBD_CSR_BASE UL(0xE1100000) -#define SPEAR3XX_ICM4_USBD_PLDT_BASE UL(0xE1200000) -#define SPEAR3XX_ICM4_USB_EHCI0_1_BASE UL(0xE1800000) -#define SPEAR3XX_ICM4_USB_OHCI0_BASE UL(0xE1900000) -#define SPEAR3XX_ICM4_USB_OHCI1_BASE UL(0xE2100000) -#define SPEAR3XX_ICM4_USB_ARB_BASE UL(0xE2800000) /* ML1 - Multi Layer CPU Subsystem */ #define SPEAR3XX_ICM3_ML1_2_BASE UL(0xF0000000) -#define SPEAR3XX_ML1_TMR_BASE UL(0xF0000000) -#define SPEAR3XX_ML1_VIC_BASE UL(0xF1100000) +#define VA_SPEAR6XX_ML_CPU_BASE UL(0xF0000000) +#define SPEAR3XX_CPU_TMR_BASE UL(0xF0000000) /* ICM3 - Basic Subsystem */ -#define SPEAR3XX_ICM3_SMEM_BASE UL(0xF8000000) #define SPEAR3XX_ICM3_SMI_CTRL_BASE UL(0xFC000000) #define VA_SPEAR3XX_ICM3_SMI_CTRL_BASE UL(0xFC000000) #define SPEAR3XX_ICM3_DMA_BASE UL(0xFC400000) -#define SPEAR3XX_ICM3_SDRAM_CTRL_BASE UL(0xFC600000) -#define SPEAR3XX_ICM3_TMR0_BASE UL(0xFC800000) -#define SPEAR3XX_ICM3_WDT_BASE UL(0xFC880000) -#define SPEAR3XX_ICM3_RTC_BASE UL(0xFC900000) -#define SPEAR3XX_ICM3_GPIO_BASE UL(0xFC980000) #define SPEAR3XX_ICM3_SYS_CTRL_BASE UL(0xFCA00000) #define VA_SPEAR3XX_ICM3_SYS_CTRL_BASE (VA_SPEAR3XX_ICM3_SMI_CTRL_BASE | SPEAR3XX_ICM3_SYS_CTRL_BASE) #define SPEAR3XX_ICM3_MISC_REG_BASE UL(0xFCA80000) #define VA_SPEAR3XX_ICM3_MISC_REG_BASE (VA_SPEAR3XX_ICM3_SMI_CTRL_BASE | SPEAR3XX_ICM3_MISC_REG_BASE) -#define SPEAR3XX_ICM3_TMR1_BASE UL(0xFCB00000) /* Debug uart for linux, will be used for debug and uncompress messages */ #define SPEAR_DBG_UART_BASE SPEAR3XX_ICM1_UART_BASE diff --git a/arch/arm/mach-spear3xx/include/mach/spear300.h b/arch/arm/mach-spear3xx/include/mach/spear300.h deleted file mode 100644 index 3b6ea0729040..000000000000 --- a/arch/arm/mach-spear3xx/include/mach/spear300.h +++ /dev/null @@ -1,54 +0,0 @@ -/* - * arch/arm/mach-spear3xx/include/mach/spear300.h - * - * SPEAr300 Machine specific definition - * - * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifdef CONFIG_MACH_SPEAR300 - -#ifndef __MACH_SPEAR300_H -#define __MACH_SPEAR300_H - -/* Base address of various IPs */ -#define SPEAR300_TELECOM_BASE UL(0x50000000) - -/* Interrupt registers offsets and masks */ -#define SPEAR300_INT_ENB_MASK_REG 0x54 -#define SPEAR300_INT_STS_MASK_REG 0x58 -#define SPEAR300_IT_PERS_S_IRQ_MASK (1 << 0) -#define SPEAR300_IT_CHANGE_S_IRQ_MASK (1 << 1) -#define SPEAR300_I2S_IRQ_MASK (1 << 2) -#define SPEAR300_TDM_IRQ_MASK (1 << 3) -#define SPEAR300_CAMERA_L_IRQ_MASK (1 << 4) -#define SPEAR300_CAMERA_F_IRQ_MASK (1 << 5) -#define SPEAR300_CAMERA_V_IRQ_MASK (1 << 6) -#define SPEAR300_KEYBOARD_IRQ_MASK (1 << 7) -#define SPEAR300_GPIO1_IRQ_MASK (1 << 8) - -#define SPEAR300_SHIRQ_RAS1_MASK 0x1FF - -#define SPEAR300_CLCD_BASE UL(0x60000000) -#define SPEAR300_SDHCI_BASE UL(0x70000000) -#define SPEAR300_NAND_0_BASE UL(0x80000000) -#define SPEAR300_NAND_1_BASE UL(0x84000000) -#define SPEAR300_NAND_2_BASE UL(0x88000000) -#define SPEAR300_NAND_3_BASE UL(0x8c000000) -#define SPEAR300_NOR_0_BASE UL(0x90000000) -#define SPEAR300_NOR_1_BASE UL(0x91000000) -#define SPEAR300_NOR_2_BASE UL(0x92000000) -#define SPEAR300_NOR_3_BASE UL(0x93000000) -#define SPEAR300_FSMC_BASE UL(0x94000000) -#define SPEAR300_SOC_CONFIG_BASE UL(0x99000000) -#define SPEAR300_KEYBOARD_BASE UL(0xA0000000) -#define SPEAR300_GPIO_BASE UL(0xA9000000) - -#endif /* __MACH_SPEAR300_H */ - -#endif /* CONFIG_MACH_SPEAR300 */ diff --git a/arch/arm/mach-spear3xx/include/mach/spear310.h b/arch/arm/mach-spear3xx/include/mach/spear310.h deleted file mode 100644 index 1567d0da725f..000000000000 --- a/arch/arm/mach-spear3xx/include/mach/spear310.h +++ /dev/null @@ -1,58 +0,0 @@ -/* - * arch/arm/mach-spear3xx/include/mach/spear310.h - * - * SPEAr310 Machine specific definition - * - * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifdef CONFIG_MACH_SPEAR310 - -#ifndef __MACH_SPEAR310_H -#define __MACH_SPEAR310_H - -#define SPEAR310_NAND_BASE UL(0x40000000) -#define SPEAR310_FSMC_BASE UL(0x44000000) -#define SPEAR310_UART1_BASE UL(0xB2000000) -#define SPEAR310_UART2_BASE UL(0xB2080000) -#define SPEAR310_UART3_BASE UL(0xB2100000) -#define SPEAR310_UART4_BASE UL(0xB2180000) -#define SPEAR310_UART5_BASE UL(0xB2200000) -#define SPEAR310_HDLC_BASE UL(0xB2800000) -#define SPEAR310_RS485_0_BASE UL(0xB3000000) -#define SPEAR310_RS485_1_BASE UL(0xB3800000) -#define SPEAR310_SOC_CONFIG_BASE UL(0xB4000000) - -/* Interrupt registers offsets and masks */ -#define SPEAR310_INT_STS_MASK_REG 0x04 -#define SPEAR310_SMII0_IRQ_MASK (1 << 0) -#define SPEAR310_SMII1_IRQ_MASK (1 << 1) -#define SPEAR310_SMII2_IRQ_MASK (1 << 2) -#define SPEAR310_SMII3_IRQ_MASK (1 << 3) -#define SPEAR310_WAKEUP_SMII0_IRQ_MASK (1 << 4) -#define SPEAR310_WAKEUP_SMII1_IRQ_MASK (1 << 5) -#define SPEAR310_WAKEUP_SMII2_IRQ_MASK (1 << 6) -#define SPEAR310_WAKEUP_SMII3_IRQ_MASK (1 << 7) -#define SPEAR310_UART1_IRQ_MASK (1 << 8) -#define SPEAR310_UART2_IRQ_MASK (1 << 9) -#define SPEAR310_UART3_IRQ_MASK (1 << 10) -#define SPEAR310_UART4_IRQ_MASK (1 << 11) -#define SPEAR310_UART5_IRQ_MASK (1 << 12) -#define SPEAR310_EMI_IRQ_MASK (1 << 13) -#define SPEAR310_TDM_HDLC_IRQ_MASK (1 << 14) -#define SPEAR310_RS485_0_IRQ_MASK (1 << 15) -#define SPEAR310_RS485_1_IRQ_MASK (1 << 16) - -#define SPEAR310_SHIRQ_RAS1_MASK 0x000FF -#define SPEAR310_SHIRQ_RAS2_MASK 0x01F00 -#define SPEAR310_SHIRQ_RAS3_MASK 0x02000 -#define SPEAR310_SHIRQ_INTRCOMM_RAS_MASK 0x1C000 - -#endif /* __MACH_SPEAR310_H */ - -#endif /* CONFIG_MACH_SPEAR310 */ diff --git a/arch/arm/mach-spear3xx/include/mach/spear320.h b/arch/arm/mach-spear3xx/include/mach/spear320.h deleted file mode 100644 index 8cfa83fa1296..000000000000 --- a/arch/arm/mach-spear3xx/include/mach/spear320.h +++ /dev/null @@ -1,67 +0,0 @@ -/* - * arch/arm/mach-spear3xx/include/mach/spear320.h - * - * SPEAr320 Machine specific definition - * - * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifdef CONFIG_MACH_SPEAR320 - -#ifndef __MACH_SPEAR320_H -#define __MACH_SPEAR320_H - -#define SPEAR320_EMI_CTRL_BASE UL(0x40000000) -#define SPEAR320_FSMC_BASE UL(0x4C000000) -#define SPEAR320_NAND_BASE UL(0x50000000) -#define SPEAR320_I2S_BASE UL(0x60000000) -#define SPEAR320_SDHCI_BASE UL(0x70000000) -#define SPEAR320_CLCD_BASE UL(0x90000000) -#define SPEAR320_PAR_PORT_BASE UL(0xA0000000) -#define SPEAR320_CAN0_BASE UL(0xA1000000) -#define SPEAR320_CAN1_BASE UL(0xA2000000) -#define SPEAR320_UART1_BASE UL(0xA3000000) -#define SPEAR320_UART2_BASE UL(0xA4000000) -#define SPEAR320_SSP0_BASE UL(0xA5000000) -#define SPEAR320_SSP1_BASE UL(0xA6000000) -#define SPEAR320_I2C_BASE UL(0xA7000000) -#define SPEAR320_PWM_BASE UL(0xA8000000) -#define SPEAR320_SMII0_BASE UL(0xAA000000) -#define SPEAR320_SMII1_BASE UL(0xAB000000) -#define SPEAR320_SOC_CONFIG_BASE UL(0xB3000000) - -/* Interrupt registers offsets and masks */ -#define SPEAR320_INT_STS_MASK_REG 0x04 -#define SPEAR320_INT_CLR_MASK_REG 0x04 -#define SPEAR320_INT_ENB_MASK_REG 0x08 -#define SPEAR320_GPIO_IRQ_MASK (1 << 0) -#define SPEAR320_I2S_PLAY_IRQ_MASK (1 << 1) -#define SPEAR320_I2S_REC_IRQ_MASK (1 << 2) -#define SPEAR320_EMI_IRQ_MASK (1 << 7) -#define SPEAR320_CLCD_IRQ_MASK (1 << 8) -#define SPEAR320_SPP_IRQ_MASK (1 << 9) -#define SPEAR320_SDHCI_IRQ_MASK (1 << 10) -#define SPEAR320_CAN_U_IRQ_MASK (1 << 11) -#define SPEAR320_CAN_L_IRQ_MASK (1 << 12) -#define SPEAR320_UART1_IRQ_MASK (1 << 13) -#define SPEAR320_UART2_IRQ_MASK (1 << 14) -#define SPEAR320_SSP1_IRQ_MASK (1 << 15) -#define SPEAR320_SSP2_IRQ_MASK (1 << 16) -#define SPEAR320_SMII0_IRQ_MASK (1 << 17) -#define SPEAR320_MII1_SMII1_IRQ_MASK (1 << 18) -#define SPEAR320_WAKEUP_SMII0_IRQ_MASK (1 << 19) -#define SPEAR320_WAKEUP_MII1_SMII1_IRQ_MASK (1 << 20) -#define SPEAR320_I2C1_IRQ_MASK (1 << 21) - -#define SPEAR320_SHIRQ_RAS1_MASK 0x000380 -#define SPEAR320_SHIRQ_RAS3_MASK 0x000007 -#define SPEAR320_SHIRQ_INTRCOMM_RAS_MASK 0x3FF800 - -#endif /* __MACH_SPEAR320_H */ - -#endif /* CONFIG_MACH_SPEAR320 */ diff --git a/arch/arm/mach-spear3xx/spear300.c b/arch/arm/mach-spear3xx/spear300.c index f46fc2692ab6..febcdd8d4e92 100644 --- a/arch/arm/mach-spear3xx/spear300.c +++ b/arch/arm/mach-spear3xx/spear300.c @@ -19,7 +19,46 @@ #include #include #include -#include +#include + +/* Base address of various IPs */ +#define SPEAR300_TELECOM_BASE UL(0x50000000) + +/* Interrupt registers offsets and masks */ +#define SPEAR300_INT_ENB_MASK_REG 0x54 +#define SPEAR300_INT_STS_MASK_REG 0x58 +#define SPEAR300_IT_PERS_S_IRQ_MASK (1 << 0) +#define SPEAR300_IT_CHANGE_S_IRQ_MASK (1 << 1) +#define SPEAR300_I2S_IRQ_MASK (1 << 2) +#define SPEAR300_TDM_IRQ_MASK (1 << 3) +#define SPEAR300_CAMERA_L_IRQ_MASK (1 << 4) +#define SPEAR300_CAMERA_F_IRQ_MASK (1 << 5) +#define SPEAR300_CAMERA_V_IRQ_MASK (1 << 6) +#define SPEAR300_KEYBOARD_IRQ_MASK (1 << 7) +#define SPEAR300_GPIO1_IRQ_MASK (1 << 8) + +#define SPEAR300_SHIRQ_RAS1_MASK 0x1FF + +#define SPEAR300_SOC_CONFIG_BASE UL(0x99000000) + + +/* SPEAr300 Virtual irq definitions */ +/* IRQs sharing IRQ_GEN_RAS_1 */ +#define SPEAR300_VIRQ_IT_PERS_S (SPEAR3XX_VIRQ_START + 0) +#define SPEAR300_VIRQ_IT_CHANGE_S (SPEAR3XX_VIRQ_START + 1) +#define SPEAR300_VIRQ_I2S (SPEAR3XX_VIRQ_START + 2) +#define SPEAR300_VIRQ_TDM (SPEAR3XX_VIRQ_START + 3) +#define SPEAR300_VIRQ_CAMERA_L (SPEAR3XX_VIRQ_START + 4) +#define SPEAR300_VIRQ_CAMERA_F (SPEAR3XX_VIRQ_START + 5) +#define SPEAR300_VIRQ_CAMERA_V (SPEAR3XX_VIRQ_START + 6) +#define SPEAR300_VIRQ_KEYBOARD (SPEAR3XX_VIRQ_START + 7) +#define SPEAR300_VIRQ_GPIO1 (SPEAR3XX_VIRQ_START + 8) + +/* IRQs sharing IRQ_GEN_RAS_3 */ +#define SPEAR300_IRQ_CLCD SPEAR3XX_IRQ_GEN_RAS_3 + +/* IRQs sharing IRQ_INTRCOMM_RAS_ARM */ +#define SPEAR300_IRQ_SDHCI SPEAR3XX_IRQ_INTRCOMM_RAS_ARM /* pad multiplexing support */ /* muxing registers */ diff --git a/arch/arm/mach-spear3xx/spear310.c b/arch/arm/mach-spear3xx/spear310.c index 063e7da0438a..b26e41566b50 100644 --- a/arch/arm/mach-spear3xx/spear310.c +++ b/arch/arm/mach-spear3xx/spear310.c @@ -20,7 +20,67 @@ #include #include #include -#include +#include + +#define SPEAR310_UART1_BASE UL(0xB2000000) +#define SPEAR310_UART2_BASE UL(0xB2080000) +#define SPEAR310_UART3_BASE UL(0xB2100000) +#define SPEAR310_UART4_BASE UL(0xB2180000) +#define SPEAR310_UART5_BASE UL(0xB2200000) +#define SPEAR310_SOC_CONFIG_BASE UL(0xB4000000) + +/* Interrupt registers offsets and masks */ +#define SPEAR310_INT_STS_MASK_REG 0x04 +#define SPEAR310_SMII0_IRQ_MASK (1 << 0) +#define SPEAR310_SMII1_IRQ_MASK (1 << 1) +#define SPEAR310_SMII2_IRQ_MASK (1 << 2) +#define SPEAR310_SMII3_IRQ_MASK (1 << 3) +#define SPEAR310_WAKEUP_SMII0_IRQ_MASK (1 << 4) +#define SPEAR310_WAKEUP_SMII1_IRQ_MASK (1 << 5) +#define SPEAR310_WAKEUP_SMII2_IRQ_MASK (1 << 6) +#define SPEAR310_WAKEUP_SMII3_IRQ_MASK (1 << 7) +#define SPEAR310_UART1_IRQ_MASK (1 << 8) +#define SPEAR310_UART2_IRQ_MASK (1 << 9) +#define SPEAR310_UART3_IRQ_MASK (1 << 10) +#define SPEAR310_UART4_IRQ_MASK (1 << 11) +#define SPEAR310_UART5_IRQ_MASK (1 << 12) +#define SPEAR310_EMI_IRQ_MASK (1 << 13) +#define SPEAR310_TDM_HDLC_IRQ_MASK (1 << 14) +#define SPEAR310_RS485_0_IRQ_MASK (1 << 15) +#define SPEAR310_RS485_1_IRQ_MASK (1 << 16) + +#define SPEAR310_SHIRQ_RAS1_MASK 0x000FF +#define SPEAR310_SHIRQ_RAS2_MASK 0x01F00 +#define SPEAR310_SHIRQ_RAS3_MASK 0x02000 +#define SPEAR310_SHIRQ_INTRCOMM_RAS_MASK 0x1C000 + +/* SPEAr310 Virtual irq definitions */ +/* IRQs sharing IRQ_GEN_RAS_1 */ +#define SPEAR310_VIRQ_SMII0 (SPEAR3XX_VIRQ_START + 0) +#define SPEAR310_VIRQ_SMII1 (SPEAR3XX_VIRQ_START + 1) +#define SPEAR310_VIRQ_SMII2 (SPEAR3XX_VIRQ_START + 2) +#define SPEAR310_VIRQ_SMII3 (SPEAR3XX_VIRQ_START + 3) +#define SPEAR310_VIRQ_WAKEUP_SMII0 (SPEAR3XX_VIRQ_START + 4) +#define SPEAR310_VIRQ_WAKEUP_SMII1 (SPEAR3XX_VIRQ_START + 5) +#define SPEAR310_VIRQ_WAKEUP_SMII2 (SPEAR3XX_VIRQ_START + 6) +#define SPEAR310_VIRQ_WAKEUP_SMII3 (SPEAR3XX_VIRQ_START + 7) + +/* IRQs sharing IRQ_GEN_RAS_2 */ +#define SPEAR310_VIRQ_UART1 (SPEAR3XX_VIRQ_START + 8) +#define SPEAR310_VIRQ_UART2 (SPEAR3XX_VIRQ_START + 9) +#define SPEAR310_VIRQ_UART3 (SPEAR3XX_VIRQ_START + 10) +#define SPEAR310_VIRQ_UART4 (SPEAR3XX_VIRQ_START + 11) +#define SPEAR310_VIRQ_UART5 (SPEAR3XX_VIRQ_START + 12) + +/* IRQs sharing IRQ_GEN_RAS_3 */ +#define SPEAR310_VIRQ_EMI (SPEAR3XX_VIRQ_START + 13) +#define SPEAR310_VIRQ_PLGPIO (SPEAR3XX_VIRQ_START + 14) + +/* IRQs sharing IRQ_INTRCOMM_RAS_ARM */ +#define SPEAR310_VIRQ_TDM_HDLC (SPEAR3XX_VIRQ_START + 15) +#define SPEAR310_VIRQ_RS485_0 (SPEAR3XX_VIRQ_START + 16) +#define SPEAR310_VIRQ_RS485_1 (SPEAR3XX_VIRQ_START + 17) + /* pad multiplexing support */ /* muxing registers */ diff --git a/arch/arm/mach-spear3xx/spear320.c b/arch/arm/mach-spear3xx/spear320.c index 1e74031e1213..2f5979b0c169 100644 --- a/arch/arm/mach-spear3xx/spear320.c +++ b/arch/arm/mach-spear3xx/spear320.c @@ -21,7 +21,67 @@ #include #include #include -#include +#include + +#define SPEAR320_UART1_BASE UL(0xA3000000) +#define SPEAR320_UART2_BASE UL(0xA4000000) +#define SPEAR320_SSP0_BASE UL(0xA5000000) +#define SPEAR320_SSP1_BASE UL(0xA6000000) +#define SPEAR320_SOC_CONFIG_BASE UL(0xB3000000) + +/* Interrupt registers offsets and masks */ +#define SPEAR320_INT_STS_MASK_REG 0x04 +#define SPEAR320_INT_CLR_MASK_REG 0x04 +#define SPEAR320_INT_ENB_MASK_REG 0x08 +#define SPEAR320_GPIO_IRQ_MASK (1 << 0) +#define SPEAR320_I2S_PLAY_IRQ_MASK (1 << 1) +#define SPEAR320_I2S_REC_IRQ_MASK (1 << 2) +#define SPEAR320_EMI_IRQ_MASK (1 << 7) +#define SPEAR320_CLCD_IRQ_MASK (1 << 8) +#define SPEAR320_SPP_IRQ_MASK (1 << 9) +#define SPEAR320_SDHCI_IRQ_MASK (1 << 10) +#define SPEAR320_CAN_U_IRQ_MASK (1 << 11) +#define SPEAR320_CAN_L_IRQ_MASK (1 << 12) +#define SPEAR320_UART1_IRQ_MASK (1 << 13) +#define SPEAR320_UART2_IRQ_MASK (1 << 14) +#define SPEAR320_SSP1_IRQ_MASK (1 << 15) +#define SPEAR320_SSP2_IRQ_MASK (1 << 16) +#define SPEAR320_SMII0_IRQ_MASK (1 << 17) +#define SPEAR320_MII1_SMII1_IRQ_MASK (1 << 18) +#define SPEAR320_WAKEUP_SMII0_IRQ_MASK (1 << 19) +#define SPEAR320_WAKEUP_MII1_SMII1_IRQ_MASK (1 << 20) +#define SPEAR320_I2C1_IRQ_MASK (1 << 21) + +#define SPEAR320_SHIRQ_RAS1_MASK 0x000380 +#define SPEAR320_SHIRQ_RAS3_MASK 0x000007 +#define SPEAR320_SHIRQ_INTRCOMM_RAS_MASK 0x3FF800 + +/* SPEAr320 Virtual irq definitions */ +/* IRQs sharing IRQ_GEN_RAS_1 */ +#define SPEAR320_VIRQ_EMI (SPEAR3XX_VIRQ_START + 0) +#define SPEAR320_VIRQ_CLCD (SPEAR3XX_VIRQ_START + 1) +#define SPEAR320_VIRQ_SPP (SPEAR3XX_VIRQ_START + 2) + +/* IRQs sharing IRQ_GEN_RAS_2 */ +#define SPEAR320_IRQ_SDHCI SPEAR3XX_IRQ_GEN_RAS_2 + +/* IRQs sharing IRQ_GEN_RAS_3 */ +#define SPEAR320_VIRQ_PLGPIO (SPEAR3XX_VIRQ_START + 3) +#define SPEAR320_VIRQ_I2S_PLAY (SPEAR3XX_VIRQ_START + 4) +#define SPEAR320_VIRQ_I2S_REC (SPEAR3XX_VIRQ_START + 5) + +/* IRQs sharing IRQ_INTRCOMM_RAS_ARM */ +#define SPEAR320_VIRQ_CANU (SPEAR3XX_VIRQ_START + 6) +#define SPEAR320_VIRQ_CANL (SPEAR3XX_VIRQ_START + 7) +#define SPEAR320_VIRQ_UART1 (SPEAR3XX_VIRQ_START + 8) +#define SPEAR320_VIRQ_UART2 (SPEAR3XX_VIRQ_START + 9) +#define SPEAR320_VIRQ_SSP1 (SPEAR3XX_VIRQ_START + 10) +#define SPEAR320_VIRQ_SSP2 (SPEAR3XX_VIRQ_START + 11) +#define SPEAR320_VIRQ_SMII0 (SPEAR3XX_VIRQ_START + 12) +#define SPEAR320_VIRQ_MII1_SMII1 (SPEAR3XX_VIRQ_START + 13) +#define SPEAR320_VIRQ_WAKEUP_SMII0 (SPEAR3XX_VIRQ_START + 14) +#define SPEAR320_VIRQ_WAKEUP_MII1_SMII1 (SPEAR3XX_VIRQ_START + 15) +#define SPEAR320_VIRQ_I2C1 (SPEAR3XX_VIRQ_START + 16) /* pad multiplexing support */ /* muxing registers */ diff --git a/arch/arm/mach-spear3xx/spear3xx.c b/arch/arm/mach-spear3xx/spear3xx.c index 17d4ac9a95e1..bbb11efa6056 100644 --- a/arch/arm/mach-spear3xx/spear3xx.c +++ b/arch/arm/mach-spear3xx/spear3xx.c @@ -21,7 +21,7 @@ #include #include #include -#include +#include /* pad multiplexing support */ /* devices */ @@ -534,7 +534,7 @@ static void __init spear3xx_timer_init(void) clk_put(gpt_clk); clk_put(pclk); - spear_setup_timer(); + spear_setup_timer(SPEAR3XX_CPU_TMR_BASE, SPEAR3XX_IRQ_CPU_GPT1_1); } struct sys_timer spear3xx_timer = { diff --git a/arch/arm/mach-spear6xx/clock.c b/arch/arm/mach-spear6xx/clock.c index adadef2b27b4..bef77d43db87 100644 --- a/arch/arm/mach-spear6xx/clock.c +++ b/arch/arm/mach-spear6xx/clock.c @@ -16,6 +16,112 @@ #include #include #include +#include + +#define PLL1_CTR (MISC_BASE + 0x008) +#define PLL1_FRQ (MISC_BASE + 0x00C) +#define PLL1_MOD (MISC_BASE + 0x010) +#define PLL2_CTR (MISC_BASE + 0x014) +/* PLL_CTR register masks */ +#define PLL_ENABLE 2 +#define PLL_MODE_SHIFT 4 +#define PLL_MODE_MASK 0x3 +#define PLL_MODE_NORMAL 0 +#define PLL_MODE_FRACTION 1 +#define PLL_MODE_DITH_DSB 2 +#define PLL_MODE_DITH_SSB 3 + +#define PLL2_FRQ (MISC_BASE + 0x018) +/* PLL FRQ register masks */ +#define PLL_DIV_N_SHIFT 0 +#define PLL_DIV_N_MASK 0xFF +#define PLL_DIV_P_SHIFT 8 +#define PLL_DIV_P_MASK 0x7 +#define PLL_NORM_FDBK_M_SHIFT 24 +#define PLL_NORM_FDBK_M_MASK 0xFF +#define PLL_DITH_FDBK_M_SHIFT 16 +#define PLL_DITH_FDBK_M_MASK 0xFFFF + +#define PLL2_MOD (MISC_BASE + 0x01C) +#define PLL_CLK_CFG (MISC_BASE + 0x020) +#define CORE_CLK_CFG (MISC_BASE + 0x024) +/* CORE CLK CFG register masks */ +#define PLL_HCLK_RATIO_SHIFT 10 +#define PLL_HCLK_RATIO_MASK 0x3 +#define HCLK_PCLK_RATIO_SHIFT 8 +#define HCLK_PCLK_RATIO_MASK 0x3 + +#define PERIP_CLK_CFG (MISC_BASE + 0x028) +/* PERIP_CLK_CFG register masks */ +#define CLCD_CLK_SHIFT 2 +#define CLCD_CLK_MASK 0x3 +#define UART_CLK_SHIFT 4 +#define UART_CLK_MASK 0x1 +#define FIRDA_CLK_SHIFT 5 +#define FIRDA_CLK_MASK 0x3 +#define GPT0_CLK_SHIFT 8 +#define GPT1_CLK_SHIFT 10 +#define GPT2_CLK_SHIFT 11 +#define GPT3_CLK_SHIFT 12 +#define GPT_CLK_MASK 0x1 +#define AUX_CLK_PLL3_VAL 0 +#define AUX_CLK_PLL1_VAL 1 + +#define PERIP1_CLK_ENB (MISC_BASE + 0x02C) +/* PERIP1_CLK_ENB register masks */ +#define UART0_CLK_ENB 3 +#define UART1_CLK_ENB 4 +#define SSP0_CLK_ENB 5 +#define SSP1_CLK_ENB 6 +#define I2C_CLK_ENB 7 +#define JPEG_CLK_ENB 8 +#define FSMC_CLK_ENB 9 +#define FIRDA_CLK_ENB 10 +#define GPT2_CLK_ENB 11 +#define GPT3_CLK_ENB 12 +#define GPIO2_CLK_ENB 13 +#define SSP2_CLK_ENB 14 +#define ADC_CLK_ENB 15 +#define GPT1_CLK_ENB 11 +#define RTC_CLK_ENB 17 +#define GPIO1_CLK_ENB 18 +#define DMA_CLK_ENB 19 +#define SMI_CLK_ENB 21 +#define CLCD_CLK_ENB 22 +#define GMAC_CLK_ENB 23 +#define USBD_CLK_ENB 24 +#define USBH0_CLK_ENB 25 +#define USBH1_CLK_ENB 26 + +#define PRSC1_CLK_CFG (MISC_BASE + 0x044) +#define PRSC2_CLK_CFG (MISC_BASE + 0x048) +#define PRSC3_CLK_CFG (MISC_BASE + 0x04C) +/* gpt synthesizer register masks */ +#define GPT_MSCALE_SHIFT 0 +#define GPT_MSCALE_MASK 0xFFF +#define GPT_NSCALE_SHIFT 12 +#define GPT_NSCALE_MASK 0xF + +#define AMEM_CLK_CFG (MISC_BASE + 0x050) +#define EXPI_CLK_CFG (MISC_BASE + 0x054) +#define CLCD_CLK_SYNT (MISC_BASE + 0x05C) +#define FIRDA_CLK_SYNT (MISC_BASE + 0x060) +#define UART_CLK_SYNT (MISC_BASE + 0x064) +#define GMAC_CLK_SYNT (MISC_BASE + 0x068) +#define RAS1_CLK_SYNT (MISC_BASE + 0x06C) +#define RAS2_CLK_SYNT (MISC_BASE + 0x070) +#define RAS3_CLK_SYNT (MISC_BASE + 0x074) +#define RAS4_CLK_SYNT (MISC_BASE + 0x078) +/* aux clk synthesiser register masks for irda to ras4 */ +#define AUX_SYNT_ENB 31 +#define AUX_EQ_SEL_SHIFT 30 +#define AUX_EQ_SEL_MASK 1 +#define AUX_EQ1_SEL 0 +#define AUX_EQ2_SEL 1 +#define AUX_XSCALE_SHIFT 16 +#define AUX_XSCALE_MASK 0xFFF +#define AUX_YSCALE_SHIFT 0 +#define AUX_YSCALE_MASK 0xFFF /* root clks */ /* 32 KHz oscillator clock */ diff --git a/arch/arm/mach-spear6xx/include/mach/generic.h b/arch/arm/mach-spear6xx/include/mach/generic.h index 116b99301cf5..7167fd331d86 100644 --- a/arch/arm/mach-spear6xx/include/mach/generic.h +++ b/arch/arm/mach-spear6xx/include/mach/generic.h @@ -15,34 +15,9 @@ #define __MACH_GENERIC_H #include -#include -#include -#include -#include - -/* - * Each GPT has 2 timer channels - * Following GPT channels will be used as clock source and clockevent - */ -#define SPEAR_GPT0_BASE SPEAR6XX_CPU_TMR_BASE -#define SPEAR_GPT0_CHAN0_IRQ IRQ_CPU_GPT1_1 -#define SPEAR_GPT0_CHAN1_IRQ IRQ_CPU_GPT1_2 - -/* Add spear6xx family device structure declarations here */ -extern struct amba_device gpio_device[]; -extern struct amba_device uart_device[]; -extern struct sys_timer spear6xx_timer; - -/* Add spear6xx family function declarations here */ -void __init spear_setup_timer(void); -void __init spear6xx_map_io(void); -void __init spear6xx_init_irq(void); -void __init spear6xx_init(void); -void __init spear600_init(void); -void __init spear6xx_clk_init(void); +void __init spear_setup_timer(resource_size_t base, int irq); void spear_restart(char, const char *); - -/* Add spear600 machine device structure declarations here */ +void __init spear6xx_clk_init(void); #endif /* __MACH_GENERIC_H */ diff --git a/arch/arm/mach-spear6xx/include/mach/hardware.h b/arch/arm/mach-spear6xx/include/mach/hardware.h index 0b3f96ae2848..40a8c178f10d 100644 --- a/arch/arm/mach-spear6xx/include/mach/hardware.h +++ b/arch/arm/mach-spear6xx/include/mach/hardware.h @@ -1,23 +1 @@ -/* - * arch/arm/mach-spear6xx/include/mach/hardware.h - * - * Hardware definitions for SPEAr6xx machine family - * - * Copyright (C) 2009 ST Microelectronics - * Rajeev Kumar - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __MACH_HARDWARE_H -#define __MACH_HARDWARE_H - -#include -#include - -/* Vitual to physical translation of statically mapped space */ -#define IO_ADDRESS(x) (x | 0xF0000000) - -#endif /* __MACH_HARDWARE_H */ +/* empty */ diff --git a/arch/arm/mach-spear6xx/include/mach/irqs.h b/arch/arm/mach-spear6xx/include/mach/irqs.h index 8f214b03d75d..2b735389e74b 100644 --- a/arch/arm/mach-spear6xx/include/mach/irqs.h +++ b/arch/arm/mach-spear6xx/include/mach/irqs.h @@ -16,82 +16,13 @@ /* IRQ definitions */ /* VIC 1 */ -#define IRQ_INTRCOMM_SW_IRQ 0 -#define IRQ_INTRCOMM_CPU_1 1 -#define IRQ_INTRCOMM_CPU_2 2 -#define IRQ_INTRCOMM_RAS2A11_1 3 -#define IRQ_INTRCOMM_RAS2A11_2 4 -#define IRQ_INTRCOMM_RAS2A12_1 5 -#define IRQ_INTRCOMM_RAS2A12_2 6 -#define IRQ_GEN_RAS_0 7 -#define IRQ_GEN_RAS_1 8 -#define IRQ_GEN_RAS_2 9 -#define IRQ_GEN_RAS_3 10 -#define IRQ_GEN_RAS_4 11 -#define IRQ_GEN_RAS_5 12 -#define IRQ_GEN_RAS_6 13 -#define IRQ_GEN_RAS_7 14 -#define IRQ_GEN_RAS_8 15 +/* FIXME: probe this from DT */ #define IRQ_CPU_GPT1_1 16 -#define IRQ_CPU_GPT1_2 17 -#define IRQ_LOCAL_GPIO 18 -#define IRQ_PLL_UNLOCK 19 -#define IRQ_JPEG 20 -#define IRQ_FSMC 21 -#define IRQ_IRDA 22 -#define IRQ_RESERVED 23 -#define IRQ_UART_0 24 -#define IRQ_UART_1 25 -#define IRQ_SSP_1 26 -#define IRQ_SSP_2 27 -#define IRQ_I2C 28 -#define IRQ_GEN_RAS_9 29 -#define IRQ_GEN_RAS_10 30 -#define IRQ_GEN_RAS_11 31 - -/* VIC 2 */ -#define IRQ_APPL_GPT1_1 32 -#define IRQ_APPL_GPT1_2 33 -#define IRQ_APPL_GPT2_1 34 -#define IRQ_APPL_GPT2_2 35 -#define IRQ_APPL_GPIO 36 -#define IRQ_APPL_SSP 37 -#define IRQ_APPL_ADC 38 -#define IRQ_APPL_RESERVED 39 -#define IRQ_AHB_EXP_MASTER 40 -#define IRQ_DDR_CONTROLLER 41 -#define IRQ_BASIC_DMA 42 -#define IRQ_BASIC_RESERVED1 43 -#define IRQ_BASIC_SMI 44 -#define IRQ_BASIC_CLCD 45 -#define IRQ_EXP_AHB_1 46 -#define IRQ_EXP_AHB_2 47 -#define IRQ_BASIC_GPT1_1 48 -#define IRQ_BASIC_GPT1_2 49 -#define IRQ_BASIC_RTC 50 -#define IRQ_BASIC_GPIO 51 -#define IRQ_BASIC_WDT 52 -#define IRQ_BASIC_RESERVED 53 -#define IRQ_AHB_EXP_SLAVE 54 -#define IRQ_GMAC_1 55 -#define IRQ_GMAC_2 56 -#define IRQ_USB_DEV 57 -#define IRQ_USB_H_OHCI_0 58 -#define IRQ_USB_H_EHCI_0 59 -#define IRQ_USB_H_OHCI_1 60 -#define IRQ_USB_H_EHCI_1 61 -#define IRQ_EXP_AHB_3 62 -#define IRQ_EXP_AHB_4 63 #define IRQ_VIC_END 64 /* GPIO pins virtual irqs */ -#define SPEAR_GPIO_INT_BASE IRQ_VIC_END -#define SPEAR_GPIO0_INT_BASE SPEAR_GPIO_INT_BASE -#define SPEAR_GPIO1_INT_BASE (SPEAR_GPIO0_INT_BASE + 8) -#define SPEAR_GPIO2_INT_BASE (SPEAR_GPIO1_INT_BASE + 8) -#define SPEAR_GPIO_INT_END (SPEAR_GPIO2_INT_BASE + 8) -#define VIRTUAL_IRQS (SPEAR_GPIO_INT_END - IRQ_VIC_END) -#define NR_IRQS (IRQ_VIC_END + VIRTUAL_IRQS) +#define VIRTUAL_IRQS 24 +#define NR_IRQS (IRQ_VIC_END + VIRTUAL_IRQS) #endif /* __MACH_IRQS_H */ diff --git a/arch/arm/mach-spear6xx/include/mach/misc_regs.h b/arch/arm/mach-spear6xx/include/mach/misc_regs.h index 68c20a007b0d..2b9aaa6cdd11 100644 --- a/arch/arm/mach-spear6xx/include/mach/misc_regs.h +++ b/arch/arm/mach-spear6xx/include/mach/misc_regs.h @@ -14,161 +14,7 @@ #ifndef __MACH_MISC_REGS_H #define __MACH_MISC_REGS_H -#include - #define MISC_BASE IOMEM(VA_SPEAR6XX_ICM3_MISC_REG_BASE) - -#define SOC_CFG_CTR (MISC_BASE + 0x000) -#define DIAG_CFG_CTR (MISC_BASE + 0x004) -#define PLL1_CTR (MISC_BASE + 0x008) -#define PLL1_FRQ (MISC_BASE + 0x00C) -#define PLL1_MOD (MISC_BASE + 0x010) -#define PLL2_CTR (MISC_BASE + 0x014) -/* PLL_CTR register masks */ -#define PLL_ENABLE 2 -#define PLL_MODE_SHIFT 4 -#define PLL_MODE_MASK 0x3 -#define PLL_MODE_NORMAL 0 -#define PLL_MODE_FRACTION 1 -#define PLL_MODE_DITH_DSB 2 -#define PLL_MODE_DITH_SSB 3 - -#define PLL2_FRQ (MISC_BASE + 0x018) -/* PLL FRQ register masks */ -#define PLL_DIV_N_SHIFT 0 -#define PLL_DIV_N_MASK 0xFF -#define PLL_DIV_P_SHIFT 8 -#define PLL_DIV_P_MASK 0x7 -#define PLL_NORM_FDBK_M_SHIFT 24 -#define PLL_NORM_FDBK_M_MASK 0xFF -#define PLL_DITH_FDBK_M_SHIFT 16 -#define PLL_DITH_FDBK_M_MASK 0xFFFF - -#define PLL2_MOD (MISC_BASE + 0x01C) -#define PLL_CLK_CFG (MISC_BASE + 0x020) -#define CORE_CLK_CFG (MISC_BASE + 0x024) -/* CORE CLK CFG register masks */ -#define PLL_HCLK_RATIO_SHIFT 10 -#define PLL_HCLK_RATIO_MASK 0x3 -#define HCLK_PCLK_RATIO_SHIFT 8 -#define HCLK_PCLK_RATIO_MASK 0x3 - -#define PERIP_CLK_CFG (MISC_BASE + 0x028) -/* PERIP_CLK_CFG register masks */ -#define CLCD_CLK_SHIFT 2 -#define CLCD_CLK_MASK 0x3 -#define UART_CLK_SHIFT 4 -#define UART_CLK_MASK 0x1 -#define FIRDA_CLK_SHIFT 5 -#define FIRDA_CLK_MASK 0x3 -#define GPT0_CLK_SHIFT 8 -#define GPT1_CLK_SHIFT 10 -#define GPT2_CLK_SHIFT 11 -#define GPT3_CLK_SHIFT 12 -#define GPT_CLK_MASK 0x1 -#define AUX_CLK_PLL3_VAL 0 -#define AUX_CLK_PLL1_VAL 1 - -#define PERIP1_CLK_ENB (MISC_BASE + 0x02C) -/* PERIP1_CLK_ENB register masks */ -#define UART0_CLK_ENB 3 -#define UART1_CLK_ENB 4 -#define SSP0_CLK_ENB 5 -#define SSP1_CLK_ENB 6 -#define I2C_CLK_ENB 7 -#define JPEG_CLK_ENB 8 -#define FSMC_CLK_ENB 9 -#define FIRDA_CLK_ENB 10 -#define GPT2_CLK_ENB 11 -#define GPT3_CLK_ENB 12 -#define GPIO2_CLK_ENB 13 -#define SSP2_CLK_ENB 14 -#define ADC_CLK_ENB 15 -#define GPT1_CLK_ENB 11 -#define RTC_CLK_ENB 17 -#define GPIO1_CLK_ENB 18 -#define DMA_CLK_ENB 19 -#define SMI_CLK_ENB 21 -#define CLCD_CLK_ENB 22 -#define GMAC_CLK_ENB 23 -#define USBD_CLK_ENB 24 -#define USBH0_CLK_ENB 25 -#define USBH1_CLK_ENB 26 - -#define SOC_CORE_ID (MISC_BASE + 0x030) -#define RAS_CLK_ENB (MISC_BASE + 0x034) -#define PERIP1_SOF_RST (MISC_BASE + 0x038) -/* PERIP1_SOF_RST register masks */ -#define JPEG_SOF_RST 8 - -#define SOC_USER_ID (MISC_BASE + 0x03C) -#define RAS_SOF_RST (MISC_BASE + 0x040) -#define PRSC1_CLK_CFG (MISC_BASE + 0x044) -#define PRSC2_CLK_CFG (MISC_BASE + 0x048) -#define PRSC3_CLK_CFG (MISC_BASE + 0x04C) -/* gpt synthesizer register masks */ -#define GPT_MSCALE_SHIFT 0 -#define GPT_MSCALE_MASK 0xFFF -#define GPT_NSCALE_SHIFT 12 -#define GPT_NSCALE_MASK 0xF - -#define AMEM_CLK_CFG (MISC_BASE + 0x050) -#define EXPI_CLK_CFG (MISC_BASE + 0x054) -#define CLCD_CLK_SYNT (MISC_BASE + 0x05C) -#define FIRDA_CLK_SYNT (MISC_BASE + 0x060) -#define UART_CLK_SYNT (MISC_BASE + 0x064) -#define GMAC_CLK_SYNT (MISC_BASE + 0x068) -#define RAS1_CLK_SYNT (MISC_BASE + 0x06C) -#define RAS2_CLK_SYNT (MISC_BASE + 0x070) -#define RAS3_CLK_SYNT (MISC_BASE + 0x074) -#define RAS4_CLK_SYNT (MISC_BASE + 0x078) -/* aux clk synthesiser register masks for irda to ras4 */ -#define AUX_SYNT_ENB 31 -#define AUX_EQ_SEL_SHIFT 30 -#define AUX_EQ_SEL_MASK 1 -#define AUX_EQ1_SEL 0 -#define AUX_EQ2_SEL 1 -#define AUX_XSCALE_SHIFT 16 -#define AUX_XSCALE_MASK 0xFFF -#define AUX_YSCALE_SHIFT 0 -#define AUX_YSCALE_MASK 0xFFF - -#define ICM1_ARB_CFG (MISC_BASE + 0x07C) -#define ICM2_ARB_CFG (MISC_BASE + 0x080) -#define ICM3_ARB_CFG (MISC_BASE + 0x084) -#define ICM4_ARB_CFG (MISC_BASE + 0x088) -#define ICM5_ARB_CFG (MISC_BASE + 0x08C) -#define ICM6_ARB_CFG (MISC_BASE + 0x090) -#define ICM7_ARB_CFG (MISC_BASE + 0x094) -#define ICM8_ARB_CFG (MISC_BASE + 0x098) -#define ICM9_ARB_CFG (MISC_BASE + 0x09C) #define DMA_CHN_CFG (MISC_BASE + 0x0A0) -#define USB2_PHY_CFG (MISC_BASE + 0x0A4) -#define GMAC_CFG_CTR (MISC_BASE + 0x0A8) -#define EXPI_CFG_CTR (MISC_BASE + 0x0AC) -#define PRC1_LOCK_CTR (MISC_BASE + 0x0C0) -#define PRC2_LOCK_CTR (MISC_BASE + 0x0C4) -#define PRC3_LOCK_CTR (MISC_BASE + 0x0C8) -#define PRC4_LOCK_CTR (MISC_BASE + 0x0CC) -#define PRC1_IRQ_CTR (MISC_BASE + 0x0D0) -#define PRC2_IRQ_CTR (MISC_BASE + 0x0D4) -#define PRC3_IRQ_CTR (MISC_BASE + 0x0D8) -#define PRC4_IRQ_CTR (MISC_BASE + 0x0DC) -#define PWRDOWN_CFG_CTR (MISC_BASE + 0x0E0) -#define COMPSSTL_1V8_CFG (MISC_BASE + 0x0E4) -#define COMPSSTL_2V5_CFG (MISC_BASE + 0x0E8) -#define COMPCOR_3V3_CFG (MISC_BASE + 0x0EC) -#define SSTLPAD_CFG_CTR (MISC_BASE + 0x0F0) -#define BIST1_CFG_CTR (MISC_BASE + 0x0F4) -#define BIST2_CFG_CTR (MISC_BASE + 0x0F8) -#define BIST3_CFG_CTR (MISC_BASE + 0x0FC) -#define BIST4_CFG_CTR (MISC_BASE + 0x100) -#define BIST5_CFG_CTR (MISC_BASE + 0x104) -#define BIST1_STS_RES (MISC_BASE + 0x108) -#define BIST2_STS_RES (MISC_BASE + 0x10C) -#define BIST3_STS_RES (MISC_BASE + 0x110) -#define BIST4_STS_RES (MISC_BASE + 0x114) -#define BIST5_STS_RES (MISC_BASE + 0x118) -#define SYSERR_CFG_CTR (MISC_BASE + 0x11C) #endif /* __MACH_MISC_REGS_H */ diff --git a/arch/arm/mach-spear6xx/include/mach/spear.h b/arch/arm/mach-spear6xx/include/mach/spear.h index 7fd621532def..d278ed047a53 100644 --- a/arch/arm/mach-spear6xx/include/mach/spear.h +++ b/arch/arm/mach-spear6xx/include/mach/spear.h @@ -15,69 +15,26 @@ #define __MACH_SPEAR6XX_H #include -#include -#define SPEAR6XX_ML_SDRAM_BASE UL(0x00000000) /* ICM1 - Low speed connection */ #define SPEAR6XX_ICM1_BASE UL(0xD0000000) - +#define VA_SPEAR6XX_ICM1_BASE UL(0xFD000000) #define SPEAR6XX_ICM1_UART0_BASE UL(0xD0000000) -#define VA_SPEAR6XX_ICM1_UART0_BASE IO_ADDRESS(SPEAR6XX_ICM1_UART0_BASE) - -#define SPEAR6XX_ICM1_UART1_BASE UL(0xD0080000) -#define SPEAR6XX_ICM1_SSP0_BASE UL(0xD0100000) -#define SPEAR6XX_ICM1_SSP1_BASE UL(0xD0180000) -#define SPEAR6XX_ICM1_I2C_BASE UL(0xD0200000) -#define SPEAR6XX_ICM1_JPEG_BASE UL(0xD0800000) -#define SPEAR6XX_ICM1_IRDA_BASE UL(0xD1000000) -#define SPEAR6XX_ICM1_FSMC_BASE UL(0xD1800000) -#define SPEAR6XX_ICM1_NAND_BASE UL(0xD2000000) -#define SPEAR6XX_ICM1_SRAM_BASE UL(0xD2800000) - -/* ICM2 - Application Subsystem */ -#define SPEAR6XX_ICM2_BASE UL(0xD8000000) -#define SPEAR6XX_ICM2_TMR0_BASE UL(0xD8000000) -#define SPEAR6XX_ICM2_TMR1_BASE UL(0xD8080000) -#define SPEAR6XX_ICM2_GPIO_BASE UL(0xD8100000) -#define SPEAR6XX_ICM2_SSP2_BASE UL(0xD8180000) -#define SPEAR6XX_ICM2_ADC_BASE UL(0xD8200000) +#define VA_SPEAR6XX_ICM1_UART0_BASE (VA_SPEAR6XX_ICM1_2_BASE | SPEAR6XX_ICM1_UART0_BASE) /* ML-1, 2 - Multi Layer CPU Subsystem */ #define SPEAR6XX_ML_CPU_BASE UL(0xF0000000) +#define VA_SPEAR6XX_ML_CPU_BASE UL(0xF0000000) #define SPEAR6XX_CPU_TMR_BASE UL(0xF0000000) -#define SPEAR6XX_CPU_GPIO_BASE UL(0xF0100000) -#define SPEAR6XX_CPU_VIC_SEC_BASE UL(0xF1000000) -#define VA_SPEAR6XX_CPU_VIC_SEC_BASE IO_ADDRESS(SPEAR6XX_CPU_VIC_SEC_BASE) -#define SPEAR6XX_CPU_VIC_PRI_BASE UL(0xF1100000) -#define VA_SPEAR6XX_CPU_VIC_PRI_BASE IO_ADDRESS(SPEAR6XX_CPU_VIC_PRI_BASE) /* ICM3 - Basic Subsystem */ -#define SPEAR6XX_ICM3_BASE UL(0xF8000000) -#define SPEAR6XX_ICM3_SMEM_BASE UL(0xF8000000) #define SPEAR6XX_ICM3_SMI_CTRL_BASE UL(0xFC000000) -#define SPEAR6XX_ICM3_CLCD_BASE UL(0xFC200000) +#define VA_SPEAR6XX_ICM3_SMI_CTRL_BASE UL(0xFC000000) #define SPEAR6XX_ICM3_DMA_BASE UL(0xFC400000) -#define SPEAR6XX_ICM3_SDRAM_CTRL_BASE UL(0xFC600000) -#define SPEAR6XX_ICM3_TMR_BASE UL(0xFC800000) -#define SPEAR6XX_ICM3_WDT_BASE UL(0xFC880000) -#define SPEAR6XX_ICM3_RTC_BASE UL(0xFC900000) -#define SPEAR6XX_ICM3_GPIO_BASE UL(0xFC980000) #define SPEAR6XX_ICM3_SYS_CTRL_BASE UL(0xFCA00000) -#define VA_SPEAR6XX_ICM3_SYS_CTRL_BASE IO_ADDRESS(SPEAR6XX_ICM3_SYS_CTRL_BASE) +#define VA_SPEAR6XX_ICM3_SYS_CTRL_BASE (VA_SPEAR6XX_ICM3_SMI_CTRL_BASE | SPEAR6XX_ICM3_SYS_CTRL_BASE) #define SPEAR6XX_ICM3_MISC_REG_BASE UL(0xFCA80000) -#define VA_SPEAR6XX_ICM3_MISC_REG_BASE IO_ADDRESS(SPEAR6XX_ICM3_MISC_REG_BASE) - -/* ICM4 - High Speed Connection */ -#define SPEAR6XX_ICM4_BASE UL(0xE0000000) -#define SPEAR6XX_ICM4_GMAC_BASE UL(0xE0800000) -#define SPEAR6XX_ICM4_USBD_FIFO_BASE UL(0xE1000000) -#define SPEAR6XX_ICM4_USBD_CSR_BASE UL(0xE1100000) -#define SPEAR6XX_ICM4_USBD_PLDT_BASE UL(0xE1200000) -#define SPEAR6XX_ICM4_USB_EHCI0_BASE UL(0xE1800000) -#define SPEAR6XX_ICM4_USB_OHCI0_BASE UL(0xE1900000) -#define SPEAR6XX_ICM4_USB_EHCI1_BASE UL(0xE2000000) -#define SPEAR6XX_ICM4_USB_OHCI1_BASE UL(0xE2100000) -#define SPEAR6XX_ICM4_USB_ARB_BASE UL(0xE2800000) +#define VA_SPEAR6XX_ICM3_MISC_REG_BASE (VA_SPEAR6XX_ICM3_SMI_CTRL_BASE | SPEAR6XX_ICM3_MISC_REG_BASE) /* Debug uart for linux, will be used for debug and uncompress messages */ #define SPEAR_DBG_UART_BASE SPEAR6XX_ICM1_UART0_BASE diff --git a/arch/arm/mach-spear6xx/include/mach/spear600.h b/arch/arm/mach-spear6xx/include/mach/spear600.h deleted file mode 100644 index c068cc50b0fb..000000000000 --- a/arch/arm/mach-spear6xx/include/mach/spear600.h +++ /dev/null @@ -1,21 +0,0 @@ -/* - * arch/arm/mach-spear66xx/include/mach/spear600.h - * - * SPEAr600 Machine specific definition - * - * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifdef CONFIG_MACH_SPEAR600 - -#ifndef __MACH_SPEAR600_H -#define __MACH_SPEAR600_H - -#endif /* __MACH_SPEAR600_H */ - -#endif /* CONFIG_MACH_SPEAR600 */ diff --git a/arch/arm/mach-spear6xx/spear6xx.c b/arch/arm/mach-spear6xx/spear6xx.c index 5b9e30f54cdb..de194dbb8371 100644 --- a/arch/arm/mach-spear6xx/spear6xx.c +++ b/arch/arm/mach-spear6xx/spear6xx.c @@ -14,6 +14,8 @@ */ #include +#include +#include #include #include #include @@ -21,9 +23,11 @@ #include #include #include +#include +#include #include #include -#include +#include /* dmac device registration */ static struct pl08x_channel_data spear600_dma_info[] = { @@ -384,32 +388,29 @@ struct pl08x_platform_data pl080_plat_data = { .num_slave_channels = ARRAY_SIZE(spear600_dma_info), }; -/* Following will create static virtual/physical mappings */ -static struct map_desc spear6xx_io_desc[] __initdata = { +/* + * Following will create 16MB static virtual/physical mappings + * PHYSICAL VIRTUAL + * 0xF0000000 0xF0000000 + * 0xF1000000 0xF1000000 + * 0xD0000000 0xFD000000 + * 0xFC000000 0xFC000000 + */ +struct map_desc spear6xx_io_desc[] __initdata = { { - .virtual = VA_SPEAR6XX_ICM1_UART0_BASE, - .pfn = __phys_to_pfn(SPEAR6XX_ICM1_UART0_BASE), - .length = SZ_4K, - .type = MT_DEVICE - }, { - .virtual = VA_SPEAR6XX_CPU_VIC_PRI_BASE, - .pfn = __phys_to_pfn(SPEAR6XX_CPU_VIC_PRI_BASE), - .length = SZ_4K, + .virtual = VA_SPEAR6XX_ML_CPU_BASE, + .pfn = __phys_to_pfn(SPEAR6XX_ML_CPU_BASE), + .length = 2 * SZ_16M, .type = MT_DEVICE - }, { - .virtual = VA_SPEAR6XX_CPU_VIC_SEC_BASE, - .pfn = __phys_to_pfn(SPEAR6XX_CPU_VIC_SEC_BASE), - .length = SZ_4K, - .type = MT_DEVICE - }, { - .virtual = VA_SPEAR6XX_ICM3_SYS_CTRL_BASE, - .pfn = __phys_to_pfn(SPEAR6XX_ICM3_SYS_CTRL_BASE), - .length = SZ_4K, + }, { + .virtual = VA_SPEAR6XX_ICM1_BASE, + .pfn = __phys_to_pfn(SPEAR6XX_ICM1_BASE), + .length = SZ_16M, .type = MT_DEVICE }, { - .virtual = VA_SPEAR6XX_ICM3_MISC_REG_BASE, - .pfn = __phys_to_pfn(SPEAR6XX_ICM3_MISC_REG_BASE), - .length = SZ_4K, + .virtual = VA_SPEAR6XX_ICM3_SMI_CTRL_BASE, + .pfn = __phys_to_pfn(SPEAR6XX_ICM3_SMI_CTRL_BASE), + .length = SZ_16M, .type = MT_DEVICE }, }; @@ -447,7 +448,7 @@ static void __init spear6xx_timer_init(void) clk_put(gpt_clk); clk_put(pclk); - spear_setup_timer(); + spear_setup_timer(SPEAR6XX_CPU_TMR_BASE, IRQ_CPU_GPT1_1); } struct sys_timer spear6xx_timer = { diff --git a/arch/arm/plat-spear/include/plat/debug-macro.S b/arch/arm/plat-spear/include/plat/debug-macro.S index 02b160a1ec9b..ab3de721c5db 100644 --- a/arch/arm/plat-spear/include/plat/debug-macro.S +++ b/arch/arm/plat-spear/include/plat/debug-macro.S @@ -12,7 +12,7 @@ */ #include -#include +#include .macro addruart, rp, rv, tmp mov \rp, #SPEAR_DBG_UART_BASE @ Physical base diff --git a/arch/arm/plat-spear/include/plat/hardware.h b/arch/arm/plat-spear/include/plat/hardware.h deleted file mode 100644 index 70187d763e26..000000000000 --- a/arch/arm/plat-spear/include/plat/hardware.h +++ /dev/null @@ -1,17 +0,0 @@ -/* - * arch/arm/plat-spear/include/plat/hardware.h - * - * Hardware definitions for SPEAr - * - * Copyright (C) 2010 ST Microelectronics - * Viresh Kumar - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __PLAT_HARDWARE_H -#define __PLAT_HARDWARE_H - -#endif /* __PLAT_HARDWARE_H */ diff --git a/arch/arm/plat-spear/include/plat/uncompress.h b/arch/arm/plat-spear/include/plat/uncompress.h index 1bf84527aee4..6dd455bafdfd 100644 --- a/arch/arm/plat-spear/include/plat/uncompress.h +++ b/arch/arm/plat-spear/include/plat/uncompress.h @@ -13,7 +13,7 @@ #include #include -#include +#include #ifndef __PLAT_UNCOMPRESS_H #define __PLAT_UNCOMPRESS_H diff --git a/arch/arm/plat-spear/pl080.c b/arch/arm/plat-spear/pl080.c index d53d75e1af5e..a56a067717c1 100644 --- a/arch/arm/plat-spear/pl080.c +++ b/arch/arm/plat-spear/pl080.c @@ -17,6 +17,7 @@ #include #include #include +#include #include static spinlock_t lock = __SPIN_LOCK_UNLOCKED(x); diff --git a/arch/arm/plat-spear/restart.c b/arch/arm/plat-spear/restart.c index 16f203e78d89..4471a232713a 100644 --- a/arch/arm/plat-spear/restart.c +++ b/arch/arm/plat-spear/restart.c @@ -13,7 +13,7 @@ #include #include #include -#include +#include #include void spear_restart(char mode, const char *cmd) diff --git a/arch/arm/plat-spear/time.c b/arch/arm/plat-spear/time.c index abb5bdecd509..a3164d1647fd 100644 --- a/arch/arm/plat-spear/time.c +++ b/arch/arm/plat-spear/time.c @@ -15,14 +15,13 @@ #include #include #include +#include #include #include #include #include #include #include -#include -#include /* * We would use TIMER0 and TIMER1 as clockevent and clocksource. @@ -175,7 +174,7 @@ static struct irqaction spear_timer_irq = { .handler = spear_timer_interrupt }; -static void __init spear_clockevent_init(void) +static void __init spear_clockevent_init(int irq) { u32 tick_rate; @@ -195,19 +194,19 @@ static void __init spear_clockevent_init(void) clockevents_register_device(&clkevt); - setup_irq(SPEAR_GPT0_CHAN0_IRQ, &spear_timer_irq); + setup_irq(irq, &spear_timer_irq); } -void __init spear_setup_timer(void) +void __init spear_setup_timer(resource_size_t base, int irq) { int ret; - if (!request_mem_region(SPEAR_GPT0_BASE, SZ_1K, "gpt0")) { + if (!request_mem_region(base, SZ_1K, "gpt0")) { pr_err("%s:cannot get IO addr\n", __func__); return; } - gpt_base = (void __iomem *)ioremap(SPEAR_GPT0_BASE, SZ_1K); + gpt_base = ioremap(base, SZ_1K); if (!gpt_base) { pr_err("%s:ioremap failed for gpt\n", __func__); goto err_mem; @@ -225,7 +224,7 @@ void __init spear_setup_timer(void) goto err_clk; } - spear_clockevent_init(); + spear_clockevent_init(irq); spear_clocksource_init(); return; @@ -235,5 +234,5 @@ err_clk: err_iomap: iounmap(gpt_base); err_mem: - release_mem_region(SPEAR_GPT0_BASE, SZ_1K); + release_mem_region(base, SZ_1K); } diff --git a/drivers/of/address.c b/drivers/of/address.c index 66d96f14c274..7e262a6124c5 100644 --- a/drivers/of/address.c +++ b/drivers/of/address.c @@ -1,4 +1,5 @@ +#include #include #include #include -- cgit v1.2.3 From deda8287e1a602393b052c80b815b3706987b3da Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Wed, 28 Mar 2012 22:27:07 +0530 Subject: pinctrl: Add SPEAr pinctrl drivers This adds pinctrl driver for SPEAr platform. It also updates MAINTAINERS file for SPEAr pinctrl drivers. Signed-off-by: Viresh Kumar Acked-by: Linus Walleij Reviewed-by: Stephen Warren --- MAINTAINERS | 23 +-- drivers/pinctrl/Kconfig | 2 + drivers/pinctrl/Makefile | 2 + drivers/pinctrl/spear/Kconfig | 14 ++ drivers/pinctrl/spear/Makefile | 3 + drivers/pinctrl/spear/pinctrl-spear.c | 354 ++++++++++++++++++++++++++++++++++ drivers/pinctrl/spear/pinctrl-spear.h | 142 ++++++++++++++ 7 files changed, 525 insertions(+), 15 deletions(-) create mode 100644 drivers/pinctrl/spear/Kconfig create mode 100644 drivers/pinctrl/spear/Makefile create mode 100644 drivers/pinctrl/spear/pinctrl-spear.c create mode 100644 drivers/pinctrl/spear/pinctrl-spear.h diff --git a/MAINTAINERS b/MAINTAINERS index b0f1073c40b0..cf900fcd074b 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -5234,6 +5234,14 @@ M: Linus Walleij S: Maintained F: drivers/pinctrl/ +PIN CONTROLLER - ST SPEAR +M: Viresh Kumar +L: spear-devel@list.st.com +L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) +W: http://www.st.com/spear +S: Maintained +F: driver/pinctrl/spear/ + PKTCDVD DRIVER M: Peter Osterlund S: Maintained @@ -6330,21 +6338,6 @@ F: arch/arm/mach-spear*/clock.c F: arch/arm/plat-spear/clock.c F: arch/arm/plat-spear/include/plat/clock.h -SPEAR PAD MULTIPLEXING SUPPORT -M: Viresh Kumar -L: spear-devel@list.st.com -L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) -W: http://www.st.com/spear -S: Maintained -F: arch/arm/plat-spear/include/plat/padmux.h -F: arch/arm/plat-spear/padmux.c -F: arch/arm/mach-spear*/spear*xx.c -F: arch/arm/mach-spear*/include/mach/generic.h -F: arch/arm/mach-spear3xx/spear3*0.c -F: arch/arm/mach-spear3xx/spear3*0_evb.c -F: arch/arm/mach-spear6xx/spear600.c -F: arch/arm/mach-spear6xx/spear600_evb.c - SPI SUBSYSTEM M: Grant Likely L: spi-devel-general@lists.sourceforge.net diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig index abfb96408779..b25ac41f7939 100644 --- a/drivers/pinctrl/Kconfig +++ b/drivers/pinctrl/Kconfig @@ -84,6 +84,8 @@ config PINCTRL_COH901 COH 901 335 and COH 901 571/3. They contain 3, 5 or 7 ports of 8 GPIO pins each. +source "drivers/pinctrl/spear/Kconfig" + endmenu endif diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile index 6d4150b4eced..2febd7608050 100644 --- a/drivers/pinctrl/Makefile +++ b/drivers/pinctrl/Makefile @@ -16,3 +16,5 @@ obj-$(CONFIG_PINCTRL_TEGRA20) += pinctrl-tegra20.o obj-$(CONFIG_PINCTRL_TEGRA30) += pinctrl-tegra30.o obj-$(CONFIG_PINCTRL_U300) += pinctrl-u300.o obj-$(CONFIG_PINCTRL_COH901) += pinctrl-coh901.o + +obj-$(CONFIG_PLAT_SPEAR) += spear/ diff --git a/drivers/pinctrl/spear/Kconfig b/drivers/pinctrl/spear/Kconfig new file mode 100644 index 000000000000..47a0e2954922 --- /dev/null +++ b/drivers/pinctrl/spear/Kconfig @@ -0,0 +1,14 @@ +# +# ST Microelectronics SPEAr PINCTRL drivers +# + +if PLAT_SPEAR + +config PINCTRL_SPEAR + bool + depends on OF + select PINMUX + help + This enables pin control drivers for SPEAr Platform + +endif diff --git a/drivers/pinctrl/spear/Makefile b/drivers/pinctrl/spear/Makefile new file mode 100644 index 000000000000..69c1a51e19d3 --- /dev/null +++ b/drivers/pinctrl/spear/Makefile @@ -0,0 +1,3 @@ +# SPEAr pinmux support + +obj-$(CONFIG_PINCTRL_SPEAR) += pinctrl-spear.o diff --git a/drivers/pinctrl/spear/pinctrl-spear.c b/drivers/pinctrl/spear/pinctrl-spear.c new file mode 100644 index 000000000000..5ae50aadf885 --- /dev/null +++ b/drivers/pinctrl/spear/pinctrl-spear.c @@ -0,0 +1,354 @@ +/* + * Driver for the ST Microelectronics SPEAr pinmux + * + * Copyright (C) 2012 ST Microelectronics + * Viresh Kumar + * + * Inspired from: + * - U300 Pinctl drivers + * - Tegra Pinctl drivers + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "pinctrl-spear.h" + +#define DRIVER_NAME "spear-pinmux" + +static inline u32 pmx_readl(struct spear_pmx *pmx, u32 reg) +{ + return readl_relaxed(pmx->vbase + reg); +} + +static inline void pmx_writel(struct spear_pmx *pmx, u32 val, u32 reg) +{ + writel_relaxed(val, pmx->vbase + reg); +} + +static int set_mode(struct spear_pmx *pmx, int mode) +{ + struct spear_pmx_mode *pmx_mode = NULL; + int i; + u32 val; + + if (!pmx->machdata->pmx_modes || !pmx->machdata->npmx_modes) + return -EINVAL; + + for (i = 0; i < pmx->machdata->npmx_modes; i++) { + if (pmx->machdata->pmx_modes[i]->mode == (1 << mode)) { + pmx_mode = pmx->machdata->pmx_modes[i]; + break; + } + } + + if (!pmx_mode) + return -EINVAL; + + val = pmx_readl(pmx, pmx_mode->reg); + val &= ~pmx_mode->mask; + val |= pmx_mode->val; + pmx_writel(pmx, val, pmx_mode->reg); + + pmx->machdata->mode = pmx_mode->mode; + dev_info(pmx->dev, "Configured Mode: %s with id: %x\n\n", + pmx_mode->name ? pmx_mode->name : "no_name", + pmx_mode->reg); + + return 0; +} + +void __devinit pmx_init_addr(struct spear_pinctrl_machdata *machdata, u16 reg) +{ + struct spear_pingroup *pgroup; + struct spear_modemux *modemux; + int i, j, group; + + for (group = 0; group < machdata->ngroups; group++) { + pgroup = machdata->groups[group]; + + for (i = 0; i < pgroup->nmodemuxs; i++) { + modemux = &pgroup->modemuxs[i]; + + for (j = 0; j < modemux->nmuxregs; j++) + if (modemux->muxregs[j].reg == 0xFFFF) + modemux->muxregs[j].reg = reg; + } + } +} + +static int spear_pinctrl_get_groups_cnt(struct pinctrl_dev *pctldev) +{ + struct spear_pmx *pmx = pinctrl_dev_get_drvdata(pctldev); + + return pmx->machdata->ngroups; +} + +static const char *spear_pinctrl_get_group_name(struct pinctrl_dev *pctldev, + unsigned group) +{ + struct spear_pmx *pmx = pinctrl_dev_get_drvdata(pctldev); + + return pmx->machdata->groups[group]->name; +} + +static int spear_pinctrl_get_group_pins(struct pinctrl_dev *pctldev, + unsigned group, const unsigned **pins, unsigned *num_pins) +{ + struct spear_pmx *pmx = pinctrl_dev_get_drvdata(pctldev); + + *pins = pmx->machdata->groups[group]->pins; + *num_pins = pmx->machdata->groups[group]->npins; + + return 0; +} + +static void spear_pinctrl_pin_dbg_show(struct pinctrl_dev *pctldev, + struct seq_file *s, unsigned offset) +{ + seq_printf(s, " " DRIVER_NAME); +} + +int spear_pinctrl_dt_node_to_map(struct pinctrl_dev *pctldev, + struct device_node *np_config, + struct pinctrl_map **map, unsigned *num_maps) +{ + struct spear_pmx *pmx = pinctrl_dev_get_drvdata(pctldev); + struct device_node *np; + struct property *prop; + const char *function, *group; + int ret, index = 0, count = 0; + + /* calculate number of maps required */ + for_each_child_of_node(np_config, np) { + ret = of_property_read_string(np, "st,function", &function); + if (ret < 0) + return ret; + + ret = of_property_count_strings(np, "st,pins"); + if (ret < 0) + return ret; + + count += ret; + } + + if (!count) { + dev_err(pmx->dev, "No child nodes passed via DT\n"); + return -ENODEV; + } + + *map = kzalloc(sizeof(**map) * count, GFP_KERNEL); + if (!*map) + return -ENOMEM; + + for_each_child_of_node(np_config, np) { + of_property_read_string(np, "st,function", &function); + of_property_for_each_string(np, "st,pins", prop, group) { + (*map)[index].type = PIN_MAP_TYPE_MUX_GROUP; + (*map)[index].data.mux.group = group; + (*map)[index].data.mux.function = function; + index++; + } + } + + *num_maps = count; + + return 0; +} + +void spear_pinctrl_dt_free_map(struct pinctrl_dev *pctldev, + struct pinctrl_map *map, unsigned num_maps) +{ + kfree(map); +} + +static struct pinctrl_ops spear_pinctrl_ops = { + .get_groups_count = spear_pinctrl_get_groups_cnt, + .get_group_name = spear_pinctrl_get_group_name, + .get_group_pins = spear_pinctrl_get_group_pins, + .pin_dbg_show = spear_pinctrl_pin_dbg_show, + .dt_node_to_map = spear_pinctrl_dt_node_to_map, + .dt_free_map = spear_pinctrl_dt_free_map, +}; + +static int spear_pinctrl_get_funcs_count(struct pinctrl_dev *pctldev) +{ + struct spear_pmx *pmx = pinctrl_dev_get_drvdata(pctldev); + + return pmx->machdata->nfunctions; +} + +static const char *spear_pinctrl_get_func_name(struct pinctrl_dev *pctldev, + unsigned function) +{ + struct spear_pmx *pmx = pinctrl_dev_get_drvdata(pctldev); + + return pmx->machdata->functions[function]->name; +} + +static int spear_pinctrl_get_func_groups(struct pinctrl_dev *pctldev, + unsigned function, const char *const **groups, + unsigned * const ngroups) +{ + struct spear_pmx *pmx = pinctrl_dev_get_drvdata(pctldev); + + *groups = pmx->machdata->functions[function]->groups; + *ngroups = pmx->machdata->functions[function]->ngroups; + + return 0; +} + +static int spear_pinctrl_endisable(struct pinctrl_dev *pctldev, + unsigned function, unsigned group, bool enable) +{ + struct spear_pmx *pmx = pinctrl_dev_get_drvdata(pctldev); + const struct spear_pingroup *pgroup; + const struct spear_modemux *modemux; + struct spear_muxreg *muxreg; + u32 val, temp; + int i, j; + bool found = false; + + pgroup = pmx->machdata->groups[group]; + + for (i = 0; i < pgroup->nmodemuxs; i++) { + modemux = &pgroup->modemuxs[i]; + + /* SoC have any modes */ + if (pmx->machdata->modes_supported) { + if (!(pmx->machdata->mode & modemux->modes)) + continue; + } + + found = true; + for (j = 0; j < modemux->nmuxregs; j++) { + muxreg = &modemux->muxregs[j]; + + val = pmx_readl(pmx, muxreg->reg); + val &= ~muxreg->mask; + + if (enable) + temp = muxreg->val; + else + temp = ~muxreg->val; + + val |= temp; + pmx_writel(pmx, val, muxreg->reg); + } + } + + if (!found) { + dev_err(pmx->dev, "pinmux group: %s not supported\n", + pgroup->name); + return -ENODEV; + } + + return 0; +} + +static int spear_pinctrl_enable(struct pinctrl_dev *pctldev, unsigned function, + unsigned group) +{ + return spear_pinctrl_endisable(pctldev, function, group, true); +} + +static void spear_pinctrl_disable(struct pinctrl_dev *pctldev, + unsigned function, unsigned group) +{ + spear_pinctrl_endisable(pctldev, function, group, false); +} + +static struct pinmux_ops spear_pinmux_ops = { + .get_functions_count = spear_pinctrl_get_funcs_count, + .get_function_name = spear_pinctrl_get_func_name, + .get_function_groups = spear_pinctrl_get_func_groups, + .enable = spear_pinctrl_enable, + .disable = spear_pinctrl_disable, +}; + +static struct pinctrl_desc spear_pinctrl_desc = { + .name = DRIVER_NAME, + .pctlops = &spear_pinctrl_ops, + .pmxops = &spear_pinmux_ops, + .owner = THIS_MODULE, +}; + +int __devinit spear_pinctrl_probe(struct platform_device *pdev, + struct spear_pinctrl_machdata *machdata) +{ + struct device_node *np = pdev->dev.of_node; + struct resource *res; + struct spear_pmx *pmx; + + if (!machdata) + return -ENODEV; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) + return -EINVAL; + + pmx = devm_kzalloc(&pdev->dev, sizeof(*pmx), GFP_KERNEL); + if (!pmx) { + dev_err(&pdev->dev, "Can't alloc spear_pmx\n"); + return -ENOMEM; + } + + pmx->vbase = devm_ioremap(&pdev->dev, res->start, resource_size(res)); + if (!pmx->vbase) { + dev_err(&pdev->dev, "Couldn't ioremap at index 0\n"); + return -ENODEV; + } + + pmx->dev = &pdev->dev; + pmx->machdata = machdata; + + /* configure mode, if supported by SoC */ + if (machdata->modes_supported) { + int mode = 0; + + if (of_property_read_u32(np, "st,pinmux-mode", &mode)) { + dev_err(&pdev->dev, "OF: pinmux mode not passed\n"); + return -EINVAL; + } + + if (set_mode(pmx, mode)) { + dev_err(&pdev->dev, "OF: Couldn't configure mode: %x\n", + mode); + return -EINVAL; + } + } + + platform_set_drvdata(pdev, pmx); + + spear_pinctrl_desc.pins = machdata->pins; + spear_pinctrl_desc.npins = machdata->npins; + + pmx->pctl = pinctrl_register(&spear_pinctrl_desc, &pdev->dev, pmx); + if (IS_ERR(pmx->pctl)) { + dev_err(&pdev->dev, "Couldn't register pinctrl driver\n"); + return PTR_ERR(pmx->pctl); + } + + return 0; +} + +int __devexit spear_pinctrl_remove(struct platform_device *pdev) +{ + struct spear_pmx *pmx = platform_get_drvdata(pdev); + + pinctrl_unregister(pmx->pctl); + + return 0; +} diff --git a/drivers/pinctrl/spear/pinctrl-spear.h b/drivers/pinctrl/spear/pinctrl-spear.h new file mode 100644 index 000000000000..47a6b5b72f90 --- /dev/null +++ b/drivers/pinctrl/spear/pinctrl-spear.h @@ -0,0 +1,142 @@ +/* + * Driver header file for the ST Microelectronics SPEAr pinmux + * + * Copyright (C) 2012 ST Microelectronics + * Viresh Kumar + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __PINMUX_SPEAR_H__ +#define __PINMUX_SPEAR_H__ + +#include +#include + +struct platform_device; +struct device; + +/** + * struct spear_pmx_mode - SPEAr pmx mode + * @name: name of pmx mode + * @mode: mode id + * @reg: register for configuring this mode + * @mask: mask of this mode in reg + * @val: val to be configured at reg after doing (val & mask) + */ +struct spear_pmx_mode { + const char *const name; + u16 mode; + u16 reg; + u16 mask; + u32 val; +}; + +/** + * struct spear_muxreg - SPEAr mux reg configuration + * @reg: register offset + * @mask: mask bits + * @val: val to be written on mask bits + */ +struct spear_muxreg { + u16 reg; + u32 mask; + u32 val; +}; + +/** + * struct spear_modemux - SPEAr mode mux configuration + * @modes: mode ids supported by this group of muxregs + * @nmuxregs: number of muxreg configurations to be done for modes + * @muxregs: array of muxreg configurations to be done for modes + */ +struct spear_modemux { + u16 modes; + u8 nmuxregs; + struct spear_muxreg *muxregs; +}; + +/** + * struct spear_pingroup - SPEAr pin group configurations + * @name: name of pin group + * @pins: array containing pin numbers + * @npins: size of pins array + * @modemuxs: array of modemux configurations for this pin group + * @nmodemuxs: size of array modemuxs + * + * A representation of a group of pins in the SPEAr pin controller. Each group + * allows some parameter or parameters to be configured. + */ +struct spear_pingroup { + const char *name; + const unsigned *pins; + unsigned npins; + struct spear_modemux *modemuxs; + unsigned nmodemuxs; +}; + +/** + * struct spear_function - SPEAr pinctrl mux function + * @name: The name of the function, exported to pinctrl core. + * @groups: An array of pin groups that may select this function. + * @ngroups: The number of entries in @groups. + */ +struct spear_function { + const char *name; + const char *const *groups; + unsigned ngroups; +}; + +/** + * struct spear_pinctrl_machdata - SPEAr pin controller machine driver + * configuration + * @pins: An array describing all pins the pin controller affects. + * All pins which are also GPIOs must be listed first within the *array, + * and be numbered identically to the GPIO controller's *numbering. + * @npins: The numbmer of entries in @pins. + * @functions: An array describing all mux functions the SoC supports. + * @nfunctions: The numbmer of entries in @functions. + * @groups: An array describing all pin groups the pin SoC supports. + * @ngroups: The numbmer of entries in @groups. + * + * @modes_supported: Does SoC support modes + * @mode: mode configured from probe + * @pmx_modes: array of modes supported by SoC + * @npmx_modes: number of entries in pmx_modes. + */ +struct spear_pinctrl_machdata { + const struct pinctrl_pin_desc *pins; + unsigned npins; + struct spear_function **functions; + unsigned nfunctions; + struct spear_pingroup **groups; + unsigned ngroups; + + bool modes_supported; + u16 mode; + struct spear_pmx_mode **pmx_modes; + unsigned npmx_modes; +}; + +/** + * struct spear_pmx - SPEAr pinctrl mux + * @dev: pointer to struct dev of platform_device registered + * @pctl: pointer to struct pinctrl_dev + * @machdata: pointer to SoC or machine specific structure + * @vbase: virtual base address of pinmux controller + */ +struct spear_pmx { + struct device *dev; + struct pinctrl_dev *pctl; + struct spear_pinctrl_machdata *machdata; + void __iomem *vbase; +}; + +/* exported routines */ +void __devinit pmx_init_addr(struct spear_pinctrl_machdata *machdata, u16 reg); +int __devinit spear_pinctrl_probe(struct platform_device *pdev, + struct spear_pinctrl_machdata *machdata); +int __devexit spear_pinctrl_remove(struct platform_device *pdev); +#endif /* __PINMUX_SPEAR_H__ */ -- cgit v1.2.3 From 52130b6033c580c27d968f64cd73209c9609e4e0 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Wed, 28 Mar 2012 22:27:07 +0530 Subject: pinctrl: Add SPEAr3xx pinctrl drivers This adds pinctrl driver for SPEAr3xx family. SPEAr3xx family supports three families: SPEAr300, SPEAr310 and SPEAr320. Signed-off-by: Viresh Kumar Acked-by: Linus Walleij Reviewed-by: Stephen Warren --- .../devicetree/bindings/pinctrl/pinctrl_spear.txt | 108 + drivers/pinctrl/spear/Kconfig | 20 + drivers/pinctrl/spear/Makefile | 4 + drivers/pinctrl/spear/pinctrl-spear300.c | 708 ++++ drivers/pinctrl/spear/pinctrl-spear310.c | 431 +++ drivers/pinctrl/spear/pinctrl-spear320.c | 3468 ++++++++++++++++++++ drivers/pinctrl/spear/pinctrl-spear3xx.c | 588 ++++ drivers/pinctrl/spear/pinctrl-spear3xx.h | 92 + 8 files changed, 5419 insertions(+) create mode 100644 Documentation/devicetree/bindings/pinctrl/pinctrl_spear.txt create mode 100644 drivers/pinctrl/spear/pinctrl-spear300.c create mode 100644 drivers/pinctrl/spear/pinctrl-spear310.c create mode 100644 drivers/pinctrl/spear/pinctrl-spear320.c create mode 100644 drivers/pinctrl/spear/pinctrl-spear3xx.c create mode 100644 drivers/pinctrl/spear/pinctrl-spear3xx.h diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl_spear.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl_spear.txt new file mode 100644 index 000000000000..3664d37e6799 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl_spear.txt @@ -0,0 +1,108 @@ +ST Microelectronics, SPEAr pinmux controller + +Required properties: +- compatible : "st,spear300-pinmux" + : "st,spear310-pinmux" + : "st,spear320-pinmux" +- reg : Address range of the pinctrl registers +- st,pinmux-mode: Mandatory for SPEAr300 and SPEAr320 and invalid for others. + - Its values for SPEAr300: + - NAND_MODE : <0> + - NOR_MODE : <1> + - PHOTO_FRAME_MODE : <2> + - LEND_IP_PHONE_MODE : <3> + - HEND_IP_PHONE_MODE : <4> + - LEND_WIFI_PHONE_MODE : <5> + - HEND_WIFI_PHONE_MODE : <6> + - ATA_PABX_WI2S_MODE : <7> + - ATA_PABX_I2S_MODE : <8> + - CAML_LCDW_MODE : <9> + - CAMU_LCD_MODE : <10> + - CAMU_WLCD_MODE : <11> + - CAML_LCD_MODE : <12> + - Its values for SPEAr320: + - AUTO_NET_SMII_MODE : <0> + - AUTO_NET_MII_MODE : <1> + - AUTO_EXP_MODE : <2> + - SMALL_PRINTERS_MODE : <3> + - EXTENDED_MODE : <4> + +Please refer to pinctrl-bindings.txt in this directory for details of the common +pinctrl bindings used by client devices. + +SPEAr's pinmux nodes act as a container for an abitrary number of subnodes. Each +of these subnodes represents muxing for a pin, a group, or a list of pins or +groups. + +The name of each subnode is not important; all subnodes should be enumerated +and processed purely based on their content. + +Required subnode-properties: +- st,pins : An array of strings. Each string contains the name of a pin or + group. +- st,function: A string containing the name of the function to mux to the pin or + group. See the SPEAr's TRM to determine which are valid for each pin or group. + + Valid values for group and function names can be found from looking at the + group and function arrays in driver files: + drivers/pinctrl/spear/pinctrl-spear3*0.c + +Valid values for group names are: +For All SPEAr3xx machines: + "firda_grp", "i2c0_grp", "ssp_cs_grp", "ssp0_grp", "mii0_grp", + "gpio0_pin0_grp", "gpio0_pin1_grp", "gpio0_pin2_grp", "gpio0_pin3_grp", + "gpio0_pin4_grp", "gpio0_pin5_grp", "uart0_ext_grp", "uart0_grp", + "timer_0_1_grp", timer_0_1_pins, "timer_2_3_grp" + +For SPEAr300 machines: + "fsmc_2chips_grp", "fsmc_4chips_grp", "clcd_lcdmode_grp", + "clcd_pfmode_grp", "tdm_grp", "i2c_clk_grp_grp", "caml_grp", "camu_grp", + "dac_grp", "i2s_grp", "sdhci_4bit_grp", "sdhci_8bit_grp", + "gpio1_0_to_3_grp", "gpio1_4_to_7_grp" + +For SPEAr310 machines: + "emi_cs_0_to_5_grp", "uart1_grp", "uart2_grp", "uart3_grp", "uart4_grp", + "uart5_grp", "fsmc_grp", "rs485_0_grp", "rs485_1_grp", "tdm_grp" + +For SPEAr320 machines: + "clcd_grp", "emi_grp", "fsmc_8bit_grp", "fsmc_16bit_grp", "spp_grp", + "sdhci_led_grp", "sdhci_cd_12_grp", "sdhci_cd_51_grp", "i2s_grp", + "uart1_grp", "uart1_modem_2_to_7_grp", "uart1_modem_31_to_36_grp", + "uart1_modem_34_to_45_grp", "uart1_modem_80_to_85_grp", "uart2_grp", + "uart3_8_9_grp", "uart3_15_16_grp", "uart3_41_42_grp", + "uart3_52_53_grp", "uart3_73_74_grp", "uart3_94_95_grp", + "uart3_98_99_grp", "uart4_6_7_grp", "uart4_13_14_grp", + "uart4_39_40_grp", "uart4_71_72_grp", "uart4_92_93_grp", + "uart4_100_101_grp", "uart5_4_5_grp", "uart5_37_38_grp", + "uart5_69_70_grp", "uart5_90_91_grp", "uart6_2_3_grp", + "uart6_88_89_grp", "rs485_grp", "touchscreen_grp", "can0_grp", + "can1_grp", "pwm0_1_pin_8_9_grp", "pwm0_1_pin_14_15_grp", + "pwm0_1_pin_30_31_grp", "pwm0_1_pin_37_38_grp", "pwm0_1_pin_42_43_grp", + "pwm0_1_pin_59_60_grp", "pwm0_1_pin_88_89_grp", "pwm2_pin_7_grp", + "pwm2_pin_13_grp", "pwm2_pin_29_grp", "pwm2_pin_34_grp", + "pwm2_pin_41_grp", "pwm2_pin_58_grp", "pwm2_pin_87_grp", + "pwm3_pin_6_grp", "pwm3_pin_12_grp", "pwm3_pin_28_grp", + "pwm3_pin_40_grp", "pwm3_pin_57_grp", "pwm3_pin_86_grp", + "ssp1_17_20_grp", "ssp1_36_39_grp", "ssp1_48_51_grp", "ssp1_65_68_grp", + "ssp1_94_97_grp", "ssp2_13_16_grp", "ssp2_32_35_grp", "ssp2_44_47_grp", + "ssp2_61_64_grp", "ssp2_90_93_grp", "mii2_grp", "smii0_1_grp", + "rmii0_1_grp", "i2c1_8_9_grp", "i2c1_98_99_grp", "i2c2_0_1_grp", + "i2c2_2_3_grp", "i2c2_19_20_grp", "i2c2_75_76_grp", "i2c2_96_97_grp" + +Valid values for function names are: +For All SPEAr3xx machines: + "firda", "i2c0", "ssp_cs", "ssp0", "mii0", "gpio0", "uart0_ext", + "uart0", "timer_0_1", "timer_2_3" + +For SPEAr300 machines: + "fsmc", "clcd", "tdm", "i2c1", "cam", "dac", "i2s", "sdhci", "gpio1" + +For SPEAr310 machines: + "emi", "uart1", "uart2", "uart3", "uart4", "uart5", "fsmc", "rs485_0", + "rs485_1", "tdm" + +For SPEAr320 machines: + "clcd", "emi", "fsmc", "spp", "sdhci", "i2s", "uart1", "uart1_modem", + "uart2", "uart3", "uart4", "uart5", "uart6", "rs485", "touchscreen", + "can0", "can1", "pwm0_1", "pwm2", "pwm3", "ssp1", "ssp2", "mii2", + "mii0_1", "i2c1", "i2c2" diff --git a/drivers/pinctrl/spear/Kconfig b/drivers/pinctrl/spear/Kconfig index 47a0e2954922..6a2596b4f359 100644 --- a/drivers/pinctrl/spear/Kconfig +++ b/drivers/pinctrl/spear/Kconfig @@ -11,4 +11,24 @@ config PINCTRL_SPEAR help This enables pin control drivers for SPEAr Platform +config PINCTRL_SPEAR3XX + bool + depends on ARCH_SPEAR3XX + select PINCTRL_SPEAR + +config PINCTRL_SPEAR300 + bool "ST Microelectronics SPEAr300 SoC pin controller driver" + depends on MACH_SPEAR300 + select PINCTRL_SPEAR3XX + +config PINCTRL_SPEAR310 + bool "ST Microelectronics SPEAr310 SoC pin controller driver" + depends on MACH_SPEAR310 + select PINCTRL_SPEAR3XX + +config PINCTRL_SPEAR320 + bool "ST Microelectronics SPEAr320 SoC pin controller driver" + depends on MACH_SPEAR320 + select PINCTRL_SPEAR3XX + endif diff --git a/drivers/pinctrl/spear/Makefile b/drivers/pinctrl/spear/Makefile index 69c1a51e19d3..15dcb85da22d 100644 --- a/drivers/pinctrl/spear/Makefile +++ b/drivers/pinctrl/spear/Makefile @@ -1,3 +1,7 @@ # SPEAr pinmux support obj-$(CONFIG_PINCTRL_SPEAR) += pinctrl-spear.o +obj-$(CONFIG_PINCTRL_SPEAR3XX) += pinctrl-spear3xx.o +obj-$(CONFIG_PINCTRL_SPEAR300) += pinctrl-spear300.o +obj-$(CONFIG_PINCTRL_SPEAR310) += pinctrl-spear310.o +obj-$(CONFIG_PINCTRL_SPEAR320) += pinctrl-spear320.o diff --git a/drivers/pinctrl/spear/pinctrl-spear300.c b/drivers/pinctrl/spear/pinctrl-spear300.c new file mode 100644 index 000000000000..9c82a35e4e78 --- /dev/null +++ b/drivers/pinctrl/spear/pinctrl-spear300.c @@ -0,0 +1,708 @@ +/* + * Driver for the ST Microelectronics SPEAr300 pinmux + * + * Copyright (C) 2012 ST Microelectronics + * Viresh Kumar + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include +#include +#include +#include +#include +#include "pinctrl-spear3xx.h" + +#define DRIVER_NAME "spear300-pinmux" + +/* addresses */ +#define PMX_CONFIG_REG 0x00 +#define MODE_CONFIG_REG 0x04 + +/* modes */ +#define NAND_MODE (1 << 0) +#define NOR_MODE (1 << 1) +#define PHOTO_FRAME_MODE (1 << 2) +#define LEND_IP_PHONE_MODE (1 << 3) +#define HEND_IP_PHONE_MODE (1 << 4) +#define LEND_WIFI_PHONE_MODE (1 << 5) +#define HEND_WIFI_PHONE_MODE (1 << 6) +#define ATA_PABX_WI2S_MODE (1 << 7) +#define ATA_PABX_I2S_MODE (1 << 8) +#define CAML_LCDW_MODE (1 << 9) +#define CAMU_LCD_MODE (1 << 10) +#define CAMU_WLCD_MODE (1 << 11) +#define CAML_LCD_MODE (1 << 12) + +static struct spear_pmx_mode pmx_mode_nand = { + .name = "nand", + .mode = NAND_MODE, + .reg = MODE_CONFIG_REG, + .mask = 0x0000000F, + .val = 0x00, +}; + +static struct spear_pmx_mode pmx_mode_nor = { + .name = "nor", + .mode = NOR_MODE, + .reg = MODE_CONFIG_REG, + .mask = 0x0000000F, + .val = 0x01, +}; + +static struct spear_pmx_mode pmx_mode_photo_frame = { + .name = "photo frame mode", + .mode = PHOTO_FRAME_MODE, + .reg = MODE_CONFIG_REG, + .mask = 0x0000000F, + .val = 0x02, +}; + +static struct spear_pmx_mode pmx_mode_lend_ip_phone = { + .name = "lend ip phone mode", + .mode = LEND_IP_PHONE_MODE, + .reg = MODE_CONFIG_REG, + .mask = 0x0000000F, + .val = 0x03, +}; + +static struct spear_pmx_mode pmx_mode_hend_ip_phone = { + .name = "hend ip phone mode", + .mode = HEND_IP_PHONE_MODE, + .reg = MODE_CONFIG_REG, + .mask = 0x0000000F, + .val = 0x04, +}; + +static struct spear_pmx_mode pmx_mode_lend_wifi_phone = { + .name = "lend wifi phone mode", + .mode = LEND_WIFI_PHONE_MODE, + .reg = MODE_CONFIG_REG, + .mask = 0x0000000F, + .val = 0x05, +}; + +static struct spear_pmx_mode pmx_mode_hend_wifi_phone = { + .name = "hend wifi phone mode", + .mode = HEND_WIFI_PHONE_MODE, + .reg = MODE_CONFIG_REG, + .mask = 0x0000000F, + .val = 0x06, +}; + +static struct spear_pmx_mode pmx_mode_ata_pabx_wi2s = { + .name = "ata pabx wi2s mode", + .mode = ATA_PABX_WI2S_MODE, + .reg = MODE_CONFIG_REG, + .mask = 0x0000000F, + .val = 0x07, +}; + +static struct spear_pmx_mode pmx_mode_ata_pabx_i2s = { + .name = "ata pabx i2s mode", + .mode = ATA_PABX_I2S_MODE, + .reg = MODE_CONFIG_REG, + .mask = 0x0000000F, + .val = 0x08, +}; + +static struct spear_pmx_mode pmx_mode_caml_lcdw = { + .name = "caml lcdw mode", + .mode = CAML_LCDW_MODE, + .reg = MODE_CONFIG_REG, + .mask = 0x0000000F, + .val = 0x0C, +}; + +static struct spear_pmx_mode pmx_mode_camu_lcd = { + .name = "camu lcd mode", + .mode = CAMU_LCD_MODE, + .reg = MODE_CONFIG_REG, + .mask = 0x0000000F, + .val = 0x0D, +}; + +static struct spear_pmx_mode pmx_mode_camu_wlcd = { + .name = "camu wlcd mode", + .mode = CAMU_WLCD_MODE, + .reg = MODE_CONFIG_REG, + .mask = 0x0000000F, + .val = 0xE, +}; + +static struct spear_pmx_mode pmx_mode_caml_lcd = { + .name = "caml lcd mode", + .mode = CAML_LCD_MODE, + .reg = MODE_CONFIG_REG, + .mask = 0x0000000F, + .val = 0x0F, +}; + +static struct spear_pmx_mode *spear300_pmx_modes[] = { + &pmx_mode_nand, + &pmx_mode_nor, + &pmx_mode_photo_frame, + &pmx_mode_lend_ip_phone, + &pmx_mode_hend_ip_phone, + &pmx_mode_lend_wifi_phone, + &pmx_mode_hend_wifi_phone, + &pmx_mode_ata_pabx_wi2s, + &pmx_mode_ata_pabx_i2s, + &pmx_mode_caml_lcdw, + &pmx_mode_camu_lcd, + &pmx_mode_camu_wlcd, + &pmx_mode_caml_lcd, +}; + +/* fsmc_2chips_pins */ +static const unsigned fsmc_2chips_pins[] = { 1, 97 }; +static struct spear_muxreg fsmc_2chips_muxreg[] = { + { + .reg = PMX_CONFIG_REG, + .mask = PMX_FIRDA_MASK, + .val = 0, + }, +}; + +static struct spear_modemux fsmc_2chips_modemux[] = { + { + .modes = NAND_MODE | NOR_MODE | PHOTO_FRAME_MODE | + ATA_PABX_WI2S_MODE | ATA_PABX_I2S_MODE, + .muxregs = fsmc_2chips_muxreg, + .nmuxregs = ARRAY_SIZE(fsmc_2chips_muxreg), + }, +}; + +static struct spear_pingroup fsmc_2chips_pingroup = { + .name = "fsmc_2chips_grp", + .pins = fsmc_2chips_pins, + .npins = ARRAY_SIZE(fsmc_2chips_pins), + .modemuxs = fsmc_2chips_modemux, + .nmodemuxs = ARRAY_SIZE(fsmc_2chips_modemux), +}; + +/* fsmc_4chips_pins */ +static const unsigned fsmc_4chips_pins[] = { 1, 2, 3, 97 }; +static struct spear_muxreg fsmc_4chips_muxreg[] = { + { + .reg = PMX_CONFIG_REG, + .mask = PMX_FIRDA_MASK | PMX_UART0_MASK, + .val = 0, + }, +}; + +static struct spear_modemux fsmc_4chips_modemux[] = { + { + .modes = NAND_MODE | NOR_MODE | PHOTO_FRAME_MODE | + ATA_PABX_WI2S_MODE | ATA_PABX_I2S_MODE, + .muxregs = fsmc_4chips_muxreg, + .nmuxregs = ARRAY_SIZE(fsmc_4chips_muxreg), + }, +}; + +static struct spear_pingroup fsmc_4chips_pingroup = { + .name = "fsmc_4chips_grp", + .pins = fsmc_4chips_pins, + .npins = ARRAY_SIZE(fsmc_4chips_pins), + .modemuxs = fsmc_4chips_modemux, + .nmodemuxs = ARRAY_SIZE(fsmc_4chips_modemux), +}; + +static const char *const fsmc_grps[] = { "fsmc_2chips_grp", "fsmc_4chips_grp" +}; +static struct spear_function fsmc_function = { + .name = "fsmc", + .groups = fsmc_grps, + .ngroups = ARRAY_SIZE(fsmc_grps), +}; + +/* clcd_lcdmode_pins */ +static const unsigned clcd_lcdmode_pins[] = { 49, 50 }; +static struct spear_muxreg clcd_lcdmode_muxreg[] = { + { + .reg = PMX_CONFIG_REG, + .mask = PMX_TIMER_0_1_MASK | PMX_TIMER_2_3_MASK, + .val = 0, + }, +}; + +static struct spear_modemux clcd_lcdmode_modemux[] = { + { + .modes = HEND_IP_PHONE_MODE | HEND_WIFI_PHONE_MODE | + CAMU_LCD_MODE | CAML_LCD_MODE, + .muxregs = clcd_lcdmode_muxreg, + .nmuxregs = ARRAY_SIZE(clcd_lcdmode_muxreg), + }, +}; + +static struct spear_pingroup clcd_lcdmode_pingroup = { + .name = "clcd_lcdmode_grp", + .pins = clcd_lcdmode_pins, + .npins = ARRAY_SIZE(clcd_lcdmode_pins), + .modemuxs = clcd_lcdmode_modemux, + .nmodemuxs = ARRAY_SIZE(clcd_lcdmode_modemux), +}; + +/* clcd_pfmode_pins */ +static const unsigned clcd_pfmode_pins[] = { 47, 48, 49, 50 }; +static struct spear_muxreg clcd_pfmode_muxreg[] = { + { + .reg = PMX_CONFIG_REG, + .mask = PMX_TIMER_2_3_MASK, + .val = 0, + }, +}; + +static struct spear_modemux clcd_pfmode_modemux[] = { + { + .modes = PHOTO_FRAME_MODE, + .muxregs = clcd_pfmode_muxreg, + .nmuxregs = ARRAY_SIZE(clcd_pfmode_muxreg), + }, +}; + +static struct spear_pingroup clcd_pfmode_pingroup = { + .name = "clcd_pfmode_grp", + .pins = clcd_pfmode_pins, + .npins = ARRAY_SIZE(clcd_pfmode_pins), + .modemuxs = clcd_pfmode_modemux, + .nmodemuxs = ARRAY_SIZE(clcd_pfmode_modemux), +}; + +static const char *const clcd_grps[] = { "clcd_lcdmode_grp", "clcd_pfmode_grp" +}; +static struct spear_function clcd_function = { + .name = "clcd", + .groups = clcd_grps, + .ngroups = ARRAY_SIZE(clcd_grps), +}; + +/* tdm_pins */ +static const unsigned tdm_pins[] = { 34, 35, 36, 37, 38 }; +static struct spear_muxreg tdm_muxreg[] = { + { + .reg = PMX_CONFIG_REG, + .mask = PMX_UART0_MODEM_MASK | PMX_SSP_CS_MASK, + .val = 0, + }, +}; + +static struct spear_modemux tdm_modemux[] = { + { + .modes = PHOTO_FRAME_MODE | LEND_IP_PHONE_MODE | + HEND_IP_PHONE_MODE | LEND_WIFI_PHONE_MODE + | HEND_WIFI_PHONE_MODE | ATA_PABX_WI2S_MODE + | ATA_PABX_I2S_MODE | CAML_LCDW_MODE | CAMU_LCD_MODE + | CAMU_WLCD_MODE | CAML_LCD_MODE, + .muxregs = tdm_muxreg, + .nmuxregs = ARRAY_SIZE(tdm_muxreg), + }, +}; + +static struct spear_pingroup tdm_pingroup = { + .name = "tdm_grp", + .pins = tdm_pins, + .npins = ARRAY_SIZE(tdm_pins), + .modemuxs = tdm_modemux, + .nmodemuxs = ARRAY_SIZE(tdm_modemux), +}; + +static const char *const tdm_grps[] = { "tdm_grp" }; +static struct spear_function tdm_function = { + .name = "tdm", + .groups = tdm_grps, + .ngroups = ARRAY_SIZE(tdm_grps), +}; + +/* i2c_clk_pins */ +static const unsigned i2c_clk_pins[] = { 45, 46, 47, 48 }; +static struct spear_muxreg i2c_clk_muxreg[] = { + { + .reg = PMX_CONFIG_REG, + .mask = PMX_TIMER_0_1_MASK | PMX_TIMER_2_3_MASK, + .val = 0, + }, +}; + +static struct spear_modemux i2c_clk_modemux[] = { + { + .modes = LEND_IP_PHONE_MODE | HEND_IP_PHONE_MODE | + LEND_WIFI_PHONE_MODE | HEND_WIFI_PHONE_MODE | + ATA_PABX_WI2S_MODE | ATA_PABX_I2S_MODE | CAML_LCDW_MODE + | CAML_LCD_MODE, + .muxregs = i2c_clk_muxreg, + .nmuxregs = ARRAY_SIZE(i2c_clk_muxreg), + }, +}; + +static struct spear_pingroup i2c_clk_pingroup = { + .name = "i2c_clk_grp_grp", + .pins = i2c_clk_pins, + .npins = ARRAY_SIZE(i2c_clk_pins), + .modemuxs = i2c_clk_modemux, + .nmodemuxs = ARRAY_SIZE(i2c_clk_modemux), +}; + +static const char *const i2c_grps[] = { "i2c_clk_grp" }; +static struct spear_function i2c_function = { + .name = "i2c1", + .groups = i2c_grps, + .ngroups = ARRAY_SIZE(i2c_grps), +}; + +/* caml_pins */ +static const unsigned caml_pins[] = { 12, 13, 14, 15, 16, 17, 18, 19, 20, 21 }; +static struct spear_muxreg caml_muxreg[] = { + { + .reg = PMX_CONFIG_REG, + .mask = PMX_MII_MASK, + .val = 0, + }, +}; + +static struct spear_modemux caml_modemux[] = { + { + .modes = CAML_LCDW_MODE | CAML_LCD_MODE, + .muxregs = caml_muxreg, + .nmuxregs = ARRAY_SIZE(caml_muxreg), + }, +}; + +static struct spear_pingroup caml_pingroup = { + .name = "caml_grp", + .pins = caml_pins, + .npins = ARRAY_SIZE(caml_pins), + .modemuxs = caml_modemux, + .nmodemuxs = ARRAY_SIZE(caml_modemux), +}; + +/* camu_pins */ +static const unsigned camu_pins[] = { 16, 17, 18, 19, 20, 21, 45, 46, 47, 48 }; +static struct spear_muxreg camu_muxreg[] = { + { + .reg = PMX_CONFIG_REG, + .mask = PMX_TIMER_0_1_MASK | PMX_TIMER_2_3_MASK | PMX_MII_MASK, + .val = 0, + }, +}; + +static struct spear_modemux camu_modemux[] = { + { + .modes = CAMU_LCD_MODE | CAMU_WLCD_MODE, + .muxregs = camu_muxreg, + .nmuxregs = ARRAY_SIZE(camu_muxreg), + }, +}; + +static struct spear_pingroup camu_pingroup = { + .name = "camu_grp", + .pins = camu_pins, + .npins = ARRAY_SIZE(camu_pins), + .modemuxs = camu_modemux, + .nmodemuxs = ARRAY_SIZE(camu_modemux), +}; + +static const char *const cam_grps[] = { "caml_grp", "camu_grp" }; +static struct spear_function cam_function = { + .name = "cam", + .groups = cam_grps, + .ngroups = ARRAY_SIZE(cam_grps), +}; + +/* dac_pins */ +static const unsigned dac_pins[] = { 43, 44 }; +static struct spear_muxreg dac_muxreg[] = { + { + .reg = PMX_CONFIG_REG, + .mask = PMX_TIMER_0_1_MASK, + .val = 0, + }, +}; + +static struct spear_modemux dac_modemux[] = { + { + .modes = ATA_PABX_I2S_MODE | CAML_LCDW_MODE | CAMU_LCD_MODE + | CAMU_WLCD_MODE | CAML_LCD_MODE, + .muxregs = dac_muxreg, + .nmuxregs = ARRAY_SIZE(dac_muxreg), + }, +}; + +static struct spear_pingroup dac_pingroup = { + .name = "dac_grp", + .pins = dac_pins, + .npins = ARRAY_SIZE(dac_pins), + .modemuxs = dac_modemux, + .nmodemuxs = ARRAY_SIZE(dac_modemux), +}; + +static const char *const dac_grps[] = { "dac_grp" }; +static struct spear_function dac_function = { + .name = "dac", + .groups = dac_grps, + .ngroups = ARRAY_SIZE(dac_grps), +}; + +/* i2s_pins */ +static const unsigned i2s_pins[] = { 39, 40, 41, 42 }; +static struct spear_muxreg i2s_muxreg[] = { + { + .reg = PMX_CONFIG_REG, + .mask = PMX_UART0_MODEM_MASK, + .val = 0, + }, +}; + +static struct spear_modemux i2s_modemux[] = { + { + .modes = LEND_IP_PHONE_MODE | HEND_IP_PHONE_MODE + | LEND_WIFI_PHONE_MODE | HEND_WIFI_PHONE_MODE | + ATA_PABX_I2S_MODE | CAML_LCDW_MODE | CAMU_LCD_MODE + | CAMU_WLCD_MODE | CAML_LCD_MODE, + .muxregs = i2s_muxreg, + .nmuxregs = ARRAY_SIZE(i2s_muxreg), + }, +}; + +static struct spear_pingroup i2s_pingroup = { + .name = "i2s_grp", + .pins = i2s_pins, + .npins = ARRAY_SIZE(i2s_pins), + .modemuxs = i2s_modemux, + .nmodemuxs = ARRAY_SIZE(i2s_modemux), +}; + +static const char *const i2s_grps[] = { "i2s_grp" }; +static struct spear_function i2s_function = { + .name = "i2s", + .groups = i2s_grps, + .ngroups = ARRAY_SIZE(i2s_grps), +}; + +/* sdhci_4bit_pins */ +static const unsigned sdhci_4bit_pins[] = { 28, 29, 30, 31, 32, 33 }; +static struct spear_muxreg sdhci_4bit_muxreg[] = { + { + .reg = PMX_CONFIG_REG, + .mask = PMX_GPIO_PIN0_MASK | PMX_GPIO_PIN1_MASK | + PMX_GPIO_PIN2_MASK | PMX_GPIO_PIN3_MASK | + PMX_GPIO_PIN4_MASK | PMX_GPIO_PIN5_MASK, + .val = 0, + }, +}; + +static struct spear_modemux sdhci_4bit_modemux[] = { + { + .modes = PHOTO_FRAME_MODE | LEND_IP_PHONE_MODE | + HEND_IP_PHONE_MODE | LEND_WIFI_PHONE_MODE | + HEND_WIFI_PHONE_MODE | CAML_LCDW_MODE | CAMU_LCD_MODE | + CAMU_WLCD_MODE | CAML_LCD_MODE | ATA_PABX_WI2S_MODE, + .muxregs = sdhci_4bit_muxreg, + .nmuxregs = ARRAY_SIZE(sdhci_4bit_muxreg), + }, +}; + +static struct spear_pingroup sdhci_4bit_pingroup = { + .name = "sdhci_4bit_grp", + .pins = sdhci_4bit_pins, + .npins = ARRAY_SIZE(sdhci_4bit_pins), + .modemuxs = sdhci_4bit_modemux, + .nmodemuxs = ARRAY_SIZE(sdhci_4bit_modemux), +}; + +/* sdhci_8bit_pins */ +static const unsigned sdhci_8bit_pins[] = { 24, 25, 26, 27, 28, 29, 30, 31, 32, + 33 }; +static struct spear_muxreg sdhci_8bit_muxreg[] = { + { + .reg = PMX_CONFIG_REG, + .mask = PMX_GPIO_PIN0_MASK | PMX_GPIO_PIN1_MASK | + PMX_GPIO_PIN2_MASK | PMX_GPIO_PIN3_MASK | + PMX_GPIO_PIN4_MASK | PMX_GPIO_PIN5_MASK | PMX_MII_MASK, + .val = 0, + }, +}; + +static struct spear_modemux sdhci_8bit_modemux[] = { + { + .modes = PHOTO_FRAME_MODE | LEND_IP_PHONE_MODE | + HEND_IP_PHONE_MODE | LEND_WIFI_PHONE_MODE | + HEND_WIFI_PHONE_MODE | CAML_LCDW_MODE | CAMU_LCD_MODE | + CAMU_WLCD_MODE | CAML_LCD_MODE, + .muxregs = sdhci_8bit_muxreg, + .nmuxregs = ARRAY_SIZE(sdhci_8bit_muxreg), + }, +}; + +static struct spear_pingroup sdhci_8bit_pingroup = { + .name = "sdhci_8bit_grp", + .pins = sdhci_8bit_pins, + .npins = ARRAY_SIZE(sdhci_8bit_pins), + .modemuxs = sdhci_8bit_modemux, + .nmodemuxs = ARRAY_SIZE(sdhci_8bit_modemux), +}; + +static const char *const sdhci_grps[] = { "sdhci_4bit_grp", "sdhci_8bit_grp" }; +static struct spear_function sdhci_function = { + .name = "sdhci", + .groups = sdhci_grps, + .ngroups = ARRAY_SIZE(sdhci_grps), +}; + +/* gpio1_0_to_3_pins */ +static const unsigned gpio1_0_to_3_pins[] = { 39, 40, 41, 42 }; +static struct spear_muxreg gpio1_0_to_3_muxreg[] = { + { + .reg = PMX_CONFIG_REG, + .mask = PMX_UART0_MODEM_MASK, + .val = 0, + }, +}; + +static struct spear_modemux gpio1_0_to_3_modemux[] = { + { + .modes = PHOTO_FRAME_MODE, + .muxregs = gpio1_0_to_3_muxreg, + .nmuxregs = ARRAY_SIZE(gpio1_0_to_3_muxreg), + }, +}; + +static struct spear_pingroup gpio1_0_to_3_pingroup = { + .name = "gpio1_0_to_3_grp", + .pins = gpio1_0_to_3_pins, + .npins = ARRAY_SIZE(gpio1_0_to_3_pins), + .modemuxs = gpio1_0_to_3_modemux, + .nmodemuxs = ARRAY_SIZE(gpio1_0_to_3_modemux), +}; + +/* gpio1_4_to_7_pins */ +static const unsigned gpio1_4_to_7_pins[] = { 43, 44, 45, 46 }; + +static struct spear_muxreg gpio1_4_to_7_muxreg[] = { + { + .reg = PMX_CONFIG_REG, + .mask = PMX_TIMER_0_1_MASK | PMX_TIMER_2_3_MASK, + .val = 0, + }, +}; + +static struct spear_modemux gpio1_4_to_7_modemux[] = { + { + .modes = PHOTO_FRAME_MODE, + .muxregs = gpio1_4_to_7_muxreg, + .nmuxregs = ARRAY_SIZE(gpio1_4_to_7_muxreg), + }, +}; + +static struct spear_pingroup gpio1_4_to_7_pingroup = { + .name = "gpio1_4_to_7_grp", + .pins = gpio1_4_to_7_pins, + .npins = ARRAY_SIZE(gpio1_4_to_7_pins), + .modemuxs = gpio1_4_to_7_modemux, + .nmodemuxs = ARRAY_SIZE(gpio1_4_to_7_modemux), +}; + +static const char *const gpio1_grps[] = { "gpio1_0_to_3_grp", "gpio1_4_to_7_grp" +}; +static struct spear_function gpio1_function = { + .name = "gpio1", + .groups = gpio1_grps, + .ngroups = ARRAY_SIZE(gpio1_grps), +}; + +/* pingroups */ +static struct spear_pingroup *spear300_pingroups[] = { + SPEAR3XX_COMMON_PINGROUPS, + &fsmc_2chips_pingroup, + &fsmc_4chips_pingroup, + &clcd_lcdmode_pingroup, + &clcd_pfmode_pingroup, + &tdm_pingroup, + &i2c_clk_pingroup, + &caml_pingroup, + &camu_pingroup, + &dac_pingroup, + &i2s_pingroup, + &sdhci_4bit_pingroup, + &sdhci_8bit_pingroup, + &gpio1_0_to_3_pingroup, + &gpio1_4_to_7_pingroup, +}; + +/* functions */ +static struct spear_function *spear300_functions[] = { + SPEAR3XX_COMMON_FUNCTIONS, + &fsmc_function, + &clcd_function, + &tdm_function, + &i2c_function, + &cam_function, + &dac_function, + &i2s_function, + &sdhci_function, + &gpio1_function, +}; + +static struct of_device_id spear300_pinctrl_of_match[] __devinitdata = { + { + .compatible = "st,spear300-pinmux", + }, + {}, +}; + +static int __devinit spear300_pinctrl_probe(struct platform_device *pdev) +{ + int ret; + + spear3xx_machdata.groups = spear300_pingroups; + spear3xx_machdata.ngroups = ARRAY_SIZE(spear300_pingroups); + spear3xx_machdata.functions = spear300_functions; + spear3xx_machdata.nfunctions = ARRAY_SIZE(spear300_functions); + + spear3xx_machdata.modes_supported = true; + spear3xx_machdata.pmx_modes = spear300_pmx_modes; + spear3xx_machdata.npmx_modes = ARRAY_SIZE(spear300_pmx_modes); + + pmx_init_addr(&spear3xx_machdata, PMX_CONFIG_REG); + + ret = spear_pinctrl_probe(pdev, &spear3xx_machdata); + if (ret) + return ret; + + return 0; +} + +static int __devexit spear300_pinctrl_remove(struct platform_device *pdev) +{ + return spear_pinctrl_remove(pdev); +} + +static struct platform_driver spear300_pinctrl_driver = { + .driver = { + .name = DRIVER_NAME, + .owner = THIS_MODULE, + .of_match_table = spear300_pinctrl_of_match, + }, + .probe = spear300_pinctrl_probe, + .remove = __devexit_p(spear300_pinctrl_remove), +}; + +static int __init spear300_pinctrl_init(void) +{ + return platform_driver_register(&spear300_pinctrl_driver); +} +arch_initcall(spear300_pinctrl_init); + +static void __exit spear300_pinctrl_exit(void) +{ + platform_driver_unregister(&spear300_pinctrl_driver); +} +module_exit(spear300_pinctrl_exit); + +MODULE_AUTHOR("Viresh Kumar "); +MODULE_DESCRIPTION("ST Microelectronics SPEAr300 pinctrl driver"); +MODULE_LICENSE("GPL v2"); +MODULE_DEVICE_TABLE(of, spear300_pinctrl_of_match); diff --git a/drivers/pinctrl/spear/pinctrl-spear310.c b/drivers/pinctrl/spear/pinctrl-spear310.c new file mode 100644 index 000000000000..1a9707605125 --- /dev/null +++ b/drivers/pinctrl/spear/pinctrl-spear310.c @@ -0,0 +1,431 @@ +/* + * Driver for the ST Microelectronics SPEAr310 pinmux + * + * Copyright (C) 2012 ST Microelectronics + * Viresh Kumar + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include +#include +#include +#include +#include +#include "pinctrl-spear3xx.h" + +#define DRIVER_NAME "spear310-pinmux" + +/* addresses */ +#define PMX_CONFIG_REG 0x08 + +/* emi_cs_0_to_5_pins */ +static const unsigned emi_cs_0_to_5_pins[] = { 45, 46, 47, 48, 49, 50 }; +static struct spear_muxreg emi_cs_0_to_5_muxreg[] = { + { + .reg = PMX_CONFIG_REG, + .mask = PMX_TIMER_0_1_MASK | PMX_TIMER_2_3_MASK, + .val = 0, + }, +}; + +static struct spear_modemux emi_cs_0_to_5_modemux[] = { + { + .muxregs = emi_cs_0_to_5_muxreg, + .nmuxregs = ARRAY_SIZE(emi_cs_0_to_5_muxreg), + }, +}; + +static struct spear_pingroup emi_cs_0_to_5_pingroup = { + .name = "emi_cs_0_to_5_grp", + .pins = emi_cs_0_to_5_pins, + .npins = ARRAY_SIZE(emi_cs_0_to_5_pins), + .modemuxs = emi_cs_0_to_5_modemux, + .nmodemuxs = ARRAY_SIZE(emi_cs_0_to_5_modemux), +}; + +static const char *const emi_cs_0_to_5_grps[] = { "emi_cs_0_to_5_grp" }; +static struct spear_function emi_cs_0_to_5_function = { + .name = "emi", + .groups = emi_cs_0_to_5_grps, + .ngroups = ARRAY_SIZE(emi_cs_0_to_5_grps), +}; + +/* uart1_pins */ +static const unsigned uart1_pins[] = { 0, 1 }; +static struct spear_muxreg uart1_muxreg[] = { + { + .reg = PMX_CONFIG_REG, + .mask = PMX_FIRDA_MASK, + .val = 0, + }, +}; + +static struct spear_modemux uart1_modemux[] = { + { + .muxregs = uart1_muxreg, + .nmuxregs = ARRAY_SIZE(uart1_muxreg), + }, +}; + +static struct spear_pingroup uart1_pingroup = { + .name = "uart1_grp", + .pins = uart1_pins, + .npins = ARRAY_SIZE(uart1_pins), + .modemuxs = uart1_modemux, + .nmodemuxs = ARRAY_SIZE(uart1_modemux), +}; + +static const char *const uart1_grps[] = { "uart1_grp" }; +static struct spear_function uart1_function = { + .name = "uart1", + .groups = uart1_grps, + .ngroups = ARRAY_SIZE(uart1_grps), +}; + +/* uart2_pins */ +static const unsigned uart2_pins[] = { 43, 44 }; +static struct spear_muxreg uart2_muxreg[] = { + { + .reg = PMX_CONFIG_REG, + .mask = PMX_TIMER_0_1_MASK, + .val = 0, + }, +}; + +static struct spear_modemux uart2_modemux[] = { + { + .muxregs = uart2_muxreg, + .nmuxregs = ARRAY_SIZE(uart2_muxreg), + }, +}; + +static struct spear_pingroup uart2_pingroup = { + .name = "uart2_grp", + .pins = uart2_pins, + .npins = ARRAY_SIZE(uart2_pins), + .modemuxs = uart2_modemux, + .nmodemuxs = ARRAY_SIZE(uart2_modemux), +}; + +static const char *const uart2_grps[] = { "uart2_grp" }; +static struct spear_function uart2_function = { + .name = "uart2", + .groups = uart2_grps, + .ngroups = ARRAY_SIZE(uart2_grps), +}; + +/* uart3_pins */ +static const unsigned uart3_pins[] = { 37, 38 }; +static struct spear_muxreg uart3_muxreg[] = { + { + .reg = PMX_CONFIG_REG, + .mask = PMX_UART0_MODEM_MASK, + .val = 0, + }, +}; + +static struct spear_modemux uart3_modemux[] = { + { + .muxregs = uart3_muxreg, + .nmuxregs = ARRAY_SIZE(uart3_muxreg), + }, +}; + +static struct spear_pingroup uart3_pingroup = { + .name = "uart3_grp", + .pins = uart3_pins, + .npins = ARRAY_SIZE(uart3_pins), + .modemuxs = uart3_modemux, + .nmodemuxs = ARRAY_SIZE(uart3_modemux), +}; + +static const char *const uart3_grps[] = { "uart3_grp" }; +static struct spear_function uart3_function = { + .name = "uart3", + .groups = uart3_grps, + .ngroups = ARRAY_SIZE(uart3_grps), +}; + +/* uart4_pins */ +static const unsigned uart4_pins[] = { 39, 40 }; +static struct spear_muxreg uart4_muxreg[] = { + { + .reg = PMX_CONFIG_REG, + .mask = PMX_UART0_MODEM_MASK, + .val = 0, + }, +}; + +static struct spear_modemux uart4_modemux[] = { + { + .muxregs = uart4_muxreg, + .nmuxregs = ARRAY_SIZE(uart4_muxreg), + }, +}; + +static struct spear_pingroup uart4_pingroup = { + .name = "uart4_grp", + .pins = uart4_pins, + .npins = ARRAY_SIZE(uart4_pins), + .modemuxs = uart4_modemux, + .nmodemuxs = ARRAY_SIZE(uart4_modemux), +}; + +static const char *const uart4_grps[] = { "uart4_grp" }; +static struct spear_function uart4_function = { + .name = "uart4", + .groups = uart4_grps, + .ngroups = ARRAY_SIZE(uart4_grps), +}; + +/* uart5_pins */ +static const unsigned uart5_pins[] = { 41, 42 }; +static struct spear_muxreg uart5_muxreg[] = { + { + .reg = PMX_CONFIG_REG, + .mask = PMX_UART0_MODEM_MASK, + .val = 0, + }, +}; + +static struct spear_modemux uart5_modemux[] = { + { + .muxregs = uart5_muxreg, + .nmuxregs = ARRAY_SIZE(uart5_muxreg), + }, +}; + +static struct spear_pingroup uart5_pingroup = { + .name = "uart5_grp", + .pins = uart5_pins, + .npins = ARRAY_SIZE(uart5_pins), + .modemuxs = uart5_modemux, + .nmodemuxs = ARRAY_SIZE(uart5_modemux), +}; + +static const char *const uart5_grps[] = { "uart5_grp" }; +static struct spear_function uart5_function = { + .name = "uart5", + .groups = uart5_grps, + .ngroups = ARRAY_SIZE(uart5_grps), +}; + +/* fsmc_pins */ +static const unsigned fsmc_pins[] = { 34, 35, 36 }; +static struct spear_muxreg fsmc_muxreg[] = { + { + .reg = PMX_CONFIG_REG, + .mask = PMX_SSP_CS_MASK, + .val = 0, + }, +}; + +static struct spear_modemux fsmc_modemux[] = { + { + .muxregs = fsmc_muxreg, + .nmuxregs = ARRAY_SIZE(fsmc_muxreg), + }, +}; + +static struct spear_pingroup fsmc_pingroup = { + .name = "fsmc_grp", + .pins = fsmc_pins, + .npins = ARRAY_SIZE(fsmc_pins), + .modemuxs = fsmc_modemux, + .nmodemuxs = ARRAY_SIZE(fsmc_modemux), +}; + +static const char *const fsmc_grps[] = { "fsmc_grp" }; +static struct spear_function fsmc_function = { + .name = "fsmc", + .groups = fsmc_grps, + .ngroups = ARRAY_SIZE(fsmc_grps), +}; + +/* rs485_0_pins */ +static const unsigned rs485_0_pins[] = { 19, 20, 21, 22, 23 }; +static struct spear_muxreg rs485_0_muxreg[] = { + { + .reg = PMX_CONFIG_REG, + .mask = PMX_MII_MASK, + .val = 0, + }, +}; + +static struct spear_modemux rs485_0_modemux[] = { + { + .muxregs = rs485_0_muxreg, + .nmuxregs = ARRAY_SIZE(rs485_0_muxreg), + }, +}; + +static struct spear_pingroup rs485_0_pingroup = { + .name = "rs485_0_grp", + .pins = rs485_0_pins, + .npins = ARRAY_SIZE(rs485_0_pins), + .modemuxs = rs485_0_modemux, + .nmodemuxs = ARRAY_SIZE(rs485_0_modemux), +}; + +static const char *const rs485_0_grps[] = { "rs485_0" }; +static struct spear_function rs485_0_function = { + .name = "rs485_0", + .groups = rs485_0_grps, + .ngroups = ARRAY_SIZE(rs485_0_grps), +}; + +/* rs485_1_pins */ +static const unsigned rs485_1_pins[] = { 14, 15, 16, 17, 18 }; +static struct spear_muxreg rs485_1_muxreg[] = { + { + .reg = PMX_CONFIG_REG, + .mask = PMX_MII_MASK, + .val = 0, + }, +}; + +static struct spear_modemux rs485_1_modemux[] = { + { + .muxregs = rs485_1_muxreg, + .nmuxregs = ARRAY_SIZE(rs485_1_muxreg), + }, +}; + +static struct spear_pingroup rs485_1_pingroup = { + .name = "rs485_1_grp", + .pins = rs485_1_pins, + .npins = ARRAY_SIZE(rs485_1_pins), + .modemuxs = rs485_1_modemux, + .nmodemuxs = ARRAY_SIZE(rs485_1_modemux), +}; + +static const char *const rs485_1_grps[] = { "rs485_1" }; +static struct spear_function rs485_1_function = { + .name = "rs485_1", + .groups = rs485_1_grps, + .ngroups = ARRAY_SIZE(rs485_1_grps), +}; + +/* tdm_pins */ +static const unsigned tdm_pins[] = { 10, 11, 12, 13 }; +static struct spear_muxreg tdm_muxreg[] = { + { + .reg = PMX_CONFIG_REG, + .mask = PMX_MII_MASK, + .val = 0, + }, +}; + +static struct spear_modemux tdm_modemux[] = { + { + .muxregs = tdm_muxreg, + .nmuxregs = ARRAY_SIZE(tdm_muxreg), + }, +}; + +static struct spear_pingroup tdm_pingroup = { + .name = "tdm_grp", + .pins = tdm_pins, + .npins = ARRAY_SIZE(tdm_pins), + .modemuxs = tdm_modemux, + .nmodemuxs = ARRAY_SIZE(tdm_modemux), +}; + +static const char *const tdm_grps[] = { "tdm_grp" }; +static struct spear_function tdm_function = { + .name = "tdm", + .groups = tdm_grps, + .ngroups = ARRAY_SIZE(tdm_grps), +}; + +/* pingroups */ +static struct spear_pingroup *spear310_pingroups[] = { + SPEAR3XX_COMMON_PINGROUPS, + &emi_cs_0_to_5_pingroup, + &uart1_pingroup, + &uart2_pingroup, + &uart3_pingroup, + &uart4_pingroup, + &uart5_pingroup, + &fsmc_pingroup, + &rs485_0_pingroup, + &rs485_1_pingroup, + &tdm_pingroup, +}; + +/* functions */ +static struct spear_function *spear310_functions[] = { + SPEAR3XX_COMMON_FUNCTIONS, + &emi_cs_0_to_5_function, + &uart1_function, + &uart2_function, + &uart3_function, + &uart4_function, + &uart5_function, + &fsmc_function, + &rs485_0_function, + &rs485_1_function, + &tdm_function, +}; + +static struct of_device_id spear310_pinctrl_of_match[] __devinitdata = { + { + .compatible = "st,spear310-pinmux", + }, + {}, +}; + +static int __devinit spear310_pinctrl_probe(struct platform_device *pdev) +{ + int ret; + + spear3xx_machdata.groups = spear310_pingroups; + spear3xx_machdata.ngroups = ARRAY_SIZE(spear310_pingroups); + spear3xx_machdata.functions = spear310_functions; + spear3xx_machdata.nfunctions = ARRAY_SIZE(spear310_functions); + + pmx_init_addr(&spear3xx_machdata, PMX_CONFIG_REG); + + spear3xx_machdata.modes_supported = false; + + ret = spear_pinctrl_probe(pdev, &spear3xx_machdata); + if (ret) + return ret; + + return 0; +} + +static int __devexit spear310_pinctrl_remove(struct platform_device *pdev) +{ + return spear_pinctrl_remove(pdev); +} + +static struct platform_driver spear310_pinctrl_driver = { + .driver = { + .name = DRIVER_NAME, + .owner = THIS_MODULE, + .of_match_table = spear310_pinctrl_of_match, + }, + .probe = spear310_pinctrl_probe, + .remove = __devexit_p(spear310_pinctrl_remove), +}; + +static int __init spear310_pinctrl_init(void) +{ + return platform_driver_register(&spear310_pinctrl_driver); +} +arch_initcall(spear310_pinctrl_init); + +static void __exit spear310_pinctrl_exit(void) +{ + platform_driver_unregister(&spear310_pinctrl_driver); +} +module_exit(spear310_pinctrl_exit); + +MODULE_AUTHOR("Viresh Kumar "); +MODULE_DESCRIPTION("ST Microelectronics SPEAr310 pinctrl driver"); +MODULE_LICENSE("GPL v2"); +MODULE_DEVICE_TABLE(of, SPEAr310_pinctrl_of_match); diff --git a/drivers/pinctrl/spear/pinctrl-spear320.c b/drivers/pinctrl/spear/pinctrl-spear320.c new file mode 100644 index 000000000000..de726e6c283a --- /dev/null +++ b/drivers/pinctrl/spear/pinctrl-spear320.c @@ -0,0 +1,3468 @@ +/* + * Driver for the ST Microelectronics SPEAr320 pinmux + * + * Copyright (C) 2012 ST Microelectronics + * Viresh Kumar + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include +#include +#include +#include +#include +#include "pinctrl-spear3xx.h" + +#define DRIVER_NAME "spear320-pinmux" + +/* addresses */ +#define PMX_CONFIG_REG 0x0C +#define MODE_CONFIG_REG 0x10 +#define MODE_EXT_CONFIG_REG 0x18 + +/* modes */ +#define AUTO_NET_SMII_MODE (1 << 0) +#define AUTO_NET_MII_MODE (1 << 1) +#define AUTO_EXP_MODE (1 << 2) +#define SMALL_PRINTERS_MODE (1 << 3) +#define EXTENDED_MODE (1 << 4) + +static struct spear_pmx_mode pmx_mode_auto_net_smii = { + .name = "Automation Networking SMII mode", + .mode = AUTO_NET_SMII_MODE, + .reg = MODE_CONFIG_REG, + .mask = 0x00000007, + .val = 0x0, +}; + +static struct spear_pmx_mode pmx_mode_auto_net_mii = { + .name = "Automation Networking MII mode", + .mode = AUTO_NET_MII_MODE, + .reg = MODE_CONFIG_REG, + .mask = 0x00000007, + .val = 0x1, +}; + +static struct spear_pmx_mode pmx_mode_auto_exp = { + .name = "Automation Expanded mode", + .mode = AUTO_EXP_MODE, + .reg = MODE_CONFIG_REG, + .mask = 0x00000007, + .val = 0x2, +}; + +static struct spear_pmx_mode pmx_mode_small_printers = { + .name = "Small Printers mode", + .mode = SMALL_PRINTERS_MODE, + .reg = MODE_CONFIG_REG, + .mask = 0x00000007, + .val = 0x3, +}; + +static struct spear_pmx_mode pmx_mode_extended = { + .name = "extended mode", + .mode = EXTENDED_MODE, + .reg = MODE_EXT_CONFIG_REG, + .mask = 0x00000001, + .val = 0x1, +}; + +static struct spear_pmx_mode *spear320_pmx_modes[] = { + &pmx_mode_auto_net_smii, + &pmx_mode_auto_net_mii, + &pmx_mode_auto_exp, + &pmx_mode_small_printers, + &pmx_mode_extended, +}; + +/* Extended mode registers and their offsets */ +#define EXT_CTRL_REG 0x0018 + #define MII_MDIO_MASK (1 << 4) + #define MII_MDIO_10_11_VAL 0 + #define MII_MDIO_81_VAL (1 << 4) + #define EMI_FSMC_DYNAMIC_MUX_MASK (1 << 5) + #define MAC_MODE_MII 0 + #define MAC_MODE_RMII 1 + #define MAC_MODE_SMII 2 + #define MAC_MODE_SS_SMII 3 + #define MAC_MODE_MASK 0x3 + #define MAC1_MODE_SHIFT 16 + #define MAC2_MODE_SHIFT 18 + +#define IP_SEL_PAD_0_9_REG 0x00A4 + #define PMX_PL_0_1_MASK (0x3F << 0) + #define PMX_UART2_PL_0_1_VAL 0x0 + #define PMX_I2C2_PL_0_1_VAL (0x4 | (0x4 << 3)) + + #define PMX_PL_2_3_MASK (0x3F << 6) + #define PMX_I2C2_PL_2_3_VAL 0x0 + #define PMX_UART6_PL_2_3_VAL ((0x1 << 6) | (0x1 << 9)) + #define PMX_UART1_ENH_PL_2_3_VAL ((0x4 << 6) | (0x4 << 9)) + + #define PMX_PL_4_5_MASK (0x3F << 12) + #define PMX_UART5_PL_4_5_VAL ((0x1 << 12) | (0x1 << 15)) + #define PMX_UART1_ENH_PL_4_5_VAL ((0x4 << 12) | (0x4 << 15)) + #define PMX_PL_5_MASK (0x7 << 15) + #define PMX_TOUCH_Y_PL_5_VAL 0x0 + + #define PMX_PL_6_7_MASK (0x3F << 18) + #define PMX_PL_6_MASK (0x7 << 18) + #define PMX_PL_7_MASK (0x7 << 21) + #define PMX_UART4_PL_6_7_VAL ((0x1 << 18) | (0x1 << 21)) + #define PMX_PWM_3_PL_6_VAL (0x2 << 18) + #define PMX_PWM_2_PL_7_VAL (0x2 << 21) + #define PMX_UART1_ENH_PL_6_7_VAL ((0x4 << 18) | (0x4 << 21)) + + #define PMX_PL_8_9_MASK (0x3F << 24) + #define PMX_UART3_PL_8_9_VAL ((0x1 << 24) | (0x1 << 27)) + #define PMX_PWM_0_1_PL_8_9_VAL ((0x2 << 24) | (0x2 << 27)) + #define PMX_I2C1_PL_8_9_VAL ((0x4 << 24) | (0x4 << 27)) + +#define IP_SEL_PAD_10_19_REG 0x00A8 + #define PMX_PL_10_11_MASK (0x3F << 0) + #define PMX_SMII_PL_10_11_VAL 0 + #define PMX_RMII_PL_10_11_VAL ((0x4 << 0) | (0x4 << 3)) + + #define PMX_PL_12_MASK (0x7 << 6) + #define PMX_PWM3_PL_12_VAL 0 + #define PMX_SDHCI_CD_PL_12_VAL (0x4 << 6) + + #define PMX_PL_13_14_MASK (0x3F << 9) + #define PMX_PL_13_MASK (0x7 << 9) + #define PMX_PL_14_MASK (0x7 << 12) + #define PMX_SSP2_PL_13_14_15_16_VAL 0 + #define PMX_UART4_PL_13_14_VAL ((0x1 << 9) | (0x1 << 12)) + #define PMX_RMII_PL_13_14_VAL ((0x4 << 9) | (0x4 << 12)) + #define PMX_PWM2_PL_13_VAL (0x2 << 9) + #define PMX_PWM1_PL_14_VAL (0x2 << 12) + + #define PMX_PL_15_MASK (0x7 << 15) + #define PMX_PWM0_PL_15_VAL (0x2 << 15) + #define PMX_PL_15_16_MASK (0x3F << 15) + #define PMX_UART3_PL_15_16_VAL ((0x1 << 15) | (0x1 << 18)) + #define PMX_RMII_PL_15_16_VAL ((0x4 << 15) | (0x4 << 18)) + + #define PMX_PL_17_18_MASK (0x3F << 21) + #define PMX_SSP1_PL_17_18_19_20_VAL 0 + #define PMX_RMII_PL_17_18_VAL ((0x4 << 21) | (0x4 << 24)) + + #define PMX_PL_19_MASK (0x7 << 27) + #define PMX_I2C2_PL_19_VAL (0x1 << 27) + #define PMX_RMII_PL_19_VAL (0x4 << 27) + +#define IP_SEL_PAD_20_29_REG 0x00AC + #define PMX_PL_20_MASK (0x7 << 0) + #define PMX_I2C2_PL_20_VAL (0x1 << 0) + #define PMX_RMII_PL_20_VAL (0x4 << 0) + + #define PMX_PL_21_TO_27_MASK (0x1FFFFF << 3) + #define PMX_SMII_PL_21_TO_27_VAL 0 + #define PMX_RMII_PL_21_TO_27_VAL ((0x4 << 3) | (0x4 << 6) | (0x4 << 9) | (0x4 << 12) | (0x4 << 15) | (0x4 << 18) | (0x4 << 21)) + + #define PMX_PL_28_29_MASK (0x3F << 24) + #define PMX_PL_28_MASK (0x7 << 24) + #define PMX_PL_29_MASK (0x7 << 27) + #define PMX_UART1_PL_28_29_VAL 0 + #define PMX_PWM_3_PL_28_VAL (0x4 << 24) + #define PMX_PWM_2_PL_29_VAL (0x4 << 27) + +#define IP_SEL_PAD_30_39_REG 0x00B0 + #define PMX_PL_30_31_MASK (0x3F << 0) + #define PMX_CAN1_PL_30_31_VAL (0) + #define PMX_PL_30_MASK (0x7 << 0) + #define PMX_PL_31_MASK (0x7 << 3) + #define PMX_PWM1_EXT_PL_30_VAL (0x4 << 0) + #define PMX_PWM0_EXT_PL_31_VAL (0x4 << 3) + #define PMX_UART1_ENH_PL_31_VAL (0x3 << 3) + + #define PMX_PL_32_33_MASK (0x3F << 6) + #define PMX_CAN0_PL_32_33_VAL 0 + #define PMX_UART1_ENH_PL_32_33_VAL ((0x3 << 6) | (0x3 << 9)) + #define PMX_SSP2_PL_32_33_VAL ((0x4 << 6) | (0x4 << 9)) + + #define PMX_PL_34_MASK (0x7 << 12) + #define PMX_PWM2_PL_34_VAL 0 + #define PMX_UART1_ENH_PL_34_VAL (0x2 << 12) + #define PMX_SSP2_PL_34_VAL (0x4 << 12) + + #define PMX_PL_35_MASK (0x7 << 15) + #define PMX_I2S_REF_CLK_PL_35_VAL 0 + #define PMX_UART1_ENH_PL_35_VAL (0x2 << 15) + #define PMX_SSP2_PL_35_VAL (0x4 << 15) + + #define PMX_PL_36_MASK (0x7 << 18) + #define PMX_TOUCH_X_PL_36_VAL 0 + #define PMX_UART1_ENH_PL_36_VAL (0x2 << 18) + #define PMX_SSP1_PL_36_VAL (0x4 << 18) + + #define PMX_PL_37_38_MASK (0x3F << 21) + #define PMX_PWM0_1_PL_37_38_VAL 0 + #define PMX_UART5_PL_37_38_VAL ((0x2 << 21) | (0x2 << 24)) + #define PMX_SSP1_PL_37_38_VAL ((0x4 << 21) | (0x4 << 24)) + + #define PMX_PL_39_MASK (0x7 << 27) + #define PMX_I2S_PL_39_VAL 0 + #define PMX_UART4_PL_39_VAL (0x2 << 27) + #define PMX_SSP1_PL_39_VAL (0x4 << 27) + +#define IP_SEL_PAD_40_49_REG 0x00B4 + #define PMX_PL_40_MASK (0x7 << 0) + #define PMX_I2S_PL_40_VAL 0 + #define PMX_UART4_PL_40_VAL (0x2 << 0) + #define PMX_PWM3_PL_40_VAL (0x4 << 0) + + #define PMX_PL_41_42_MASK (0x3F << 3) + #define PMX_PL_41_MASK (0x7 << 3) + #define PMX_PL_42_MASK (0x7 << 6) + #define PMX_I2S_PL_41_42_VAL 0 + #define PMX_UART3_PL_41_42_VAL ((0x2 << 3) | (0x2 << 6)) + #define PMX_PWM2_PL_41_VAL (0x4 << 3) + #define PMX_PWM1_PL_42_VAL (0x4 << 6) + + #define PMX_PL_43_MASK (0x7 << 9) + #define PMX_SDHCI_PL_43_VAL 0 + #define PMX_UART1_ENH_PL_43_VAL (0x2 << 9) + #define PMX_PWM0_PL_43_VAL (0x4 << 9) + + #define PMX_PL_44_45_MASK (0x3F << 12) + #define PMX_SDHCI_PL_44_45_VAL 0 + #define PMX_UART1_ENH_PL_44_45_VAL ((0x2 << 12) | (0x2 << 15)) + #define PMX_SSP2_PL_44_45_VAL ((0x4 << 12) | (0x4 << 15)) + + #define PMX_PL_46_47_MASK (0x3F << 18) + #define PMX_SDHCI_PL_46_47_VAL 0 + #define PMX_FSMC_EMI_PL_46_47_VAL ((0x2 << 18) | (0x2 << 21)) + #define PMX_SSP2_PL_46_47_VAL ((0x4 << 18) | (0x4 << 21)) + + #define PMX_PL_48_49_MASK (0x3F << 24) + #define PMX_SDHCI_PL_48_49_VAL 0 + #define PMX_FSMC_EMI_PL_48_49_VAL ((0x2 << 24) | (0x2 << 27)) + #define PMX_SSP1_PL_48_49_VAL ((0x4 << 24) | (0x4 << 27)) + +#define IP_SEL_PAD_50_59_REG 0x00B8 + #define PMX_PL_50_51_MASK (0x3F << 0) + #define PMX_EMI_PL_50_51_VAL ((0x2 << 0) | (0x2 << 3)) + #define PMX_SSP1_PL_50_51_VAL ((0x4 << 0) | (0x4 << 3)) + #define PMX_PL_50_MASK (0x7 << 0) + #define PMX_PL_51_MASK (0x7 << 3) + #define PMX_SDHCI_PL_50_VAL 0 + #define PMX_SDHCI_CD_PL_51_VAL 0 + + #define PMX_PL_52_53_MASK (0x3F << 6) + #define PMX_FSMC_PL_52_53_VAL 0 + #define PMX_EMI_PL_52_53_VAL ((0x2 << 6) | (0x2 << 9)) + #define PMX_UART3_PL_52_53_VAL ((0x4 << 6) | (0x4 << 9)) + + #define PMX_PL_54_55_56_MASK (0x1FF << 12) + #define PMX_FSMC_EMI_PL_54_55_56_VAL ((0x2 << 12) | (0x2 << 15) | (0x2 << 18)) + + #define PMX_PL_57_MASK (0x7 << 21) + #define PMX_FSMC_PL_57_VAL 0 + #define PMX_PWM3_PL_57_VAL (0x4 << 21) + + #define PMX_PL_58_59_MASK (0x3F << 24) + #define PMX_PL_58_MASK (0x7 << 24) + #define PMX_PL_59_MASK (0x7 << 27) + #define PMX_FSMC_EMI_PL_58_59_VAL ((0x2 << 24) | (0x2 << 27)) + #define PMX_PWM2_PL_58_VAL (0x4 << 24) + #define PMX_PWM1_PL_59_VAL (0x4 << 27) + +#define IP_SEL_PAD_60_69_REG 0x00BC + #define PMX_PL_60_MASK (0x7 << 0) + #define PMX_FSMC_PL_60_VAL 0 + #define PMX_PWM0_PL_60_VAL (0x4 << 0) + + #define PMX_PL_61_TO_64_MASK (0xFFF << 3) + #define PMX_FSMC_PL_61_TO_64_VAL ((0x2 << 3) | (0x2 << 6) | (0x2 << 9) | (0x2 << 12)) + #define PMX_SSP2_PL_61_TO_64_VAL ((0x4 << 3) | (0x4 << 6) | (0x4 << 9) | (0x4 << 12)) + + #define PMX_PL_65_TO_68_MASK (0xFFF << 15) + #define PMX_FSMC_PL_65_TO_68_VAL ((0x2 << 15) | (0x2 << 18) | (0x2 << 21) | (0x2 << 24)) + #define PMX_SSP1_PL_65_TO_68_VAL ((0x4 << 15) | (0x4 << 18) | (0x4 << 21) | (0x4 << 24)) + + #define PMX_PL_69_MASK (0x7 << 27) + #define PMX_CLCD_PL_69_VAL (0) + #define PMX_EMI_PL_69_VAL (0x2 << 27) + #define PMX_SPP_PL_69_VAL (0x3 << 27) + #define PMX_UART5_PL_69_VAL (0x4 << 27) + +#define IP_SEL_PAD_70_79_REG 0x00C0 + #define PMX_PL_70_MASK (0x7 << 0) + #define PMX_CLCD_PL_70_VAL (0) + #define PMX_FSMC_EMI_PL_70_VAL (0x2 << 0) + #define PMX_SPP_PL_70_VAL (0x3 << 0) + #define PMX_UART5_PL_70_VAL (0x4 << 0) + + #define PMX_PL_71_72_MASK (0x3F << 3) + #define PMX_CLCD_PL_71_72_VAL (0) + #define PMX_FSMC_EMI_PL_71_72_VAL ((0x2 << 3) | (0x2 << 6)) + #define PMX_SPP_PL_71_72_VAL ((0x3 << 3) | (0x3 << 6)) + #define PMX_UART4_PL_71_72_VAL ((0x4 << 3) | (0x4 << 6)) + + #define PMX_PL_73_MASK (0x7 << 9) + #define PMX_CLCD_PL_73_VAL (0) + #define PMX_FSMC_EMI_PL_73_VAL (0x2 << 9) + #define PMX_SPP_PL_73_VAL (0x3 << 9) + #define PMX_UART3_PL_73_VAL (0x4 << 9) + + #define PMX_PL_74_MASK (0x7 << 12) + #define PMX_CLCD_PL_74_VAL (0) + #define PMX_EMI_PL_74_VAL (0x2 << 12) + #define PMX_SPP_PL_74_VAL (0x3 << 12) + #define PMX_UART3_PL_74_VAL (0x4 << 12) + + #define PMX_PL_75_76_MASK (0x3F << 15) + #define PMX_CLCD_PL_75_76_VAL (0) + #define PMX_EMI_PL_75_76_VAL ((0x2 << 15) | (0x2 << 18)) + #define PMX_SPP_PL_75_76_VAL ((0x3 << 15) | (0x3 << 18)) + #define PMX_I2C2_PL_75_76_VAL ((0x4 << 15) | (0x4 << 18)) + + #define PMX_PL_77_78_79_MASK (0x1FF << 21) + #define PMX_CLCD_PL_77_78_79_VAL (0) + #define PMX_EMI_PL_77_78_79_VAL ((0x2 << 21) | (0x2 << 24) | (0x2 << 27)) + #define PMX_SPP_PL_77_78_79_VAL ((0x3 << 21) | (0x3 << 24) | (0x3 << 27)) + #define PMX_RS485_PL_77_78_79_VAL ((0x4 << 21) | (0x4 << 24) | (0x4 << 27)) + +#define IP_SEL_PAD_80_89_REG 0x00C4 + #define PMX_PL_80_TO_85_MASK (0x3FFFF << 0) + #define PMX_CLCD_PL_80_TO_85_VAL 0 + #define PMX_MII2_PL_80_TO_85_VAL ((0x1 << 0) | (0x1 << 3) | (0x1 << 6) | (0x1 << 9) | (0x1 << 12) | (0x1 << 15)) + #define PMX_EMI_PL_80_TO_85_VAL ((0x2 << 0) | (0x2 << 3) | (0x2 << 6) | (0x2 << 9) | (0x2 << 12) | (0x2 << 15)) + #define PMX_SPP_PL_80_TO_85_VAL ((0x3 << 0) | (0x3 << 3) | (0x3 << 6) | (0x3 << 9) | (0x3 << 12) | (0x3 << 15)) + #define PMX_UART1_ENH_PL_80_TO_85_VAL ((0x4 << 0) | (0x4 << 3) | (0x4 << 6) | (0x4 << 9) | (0x4 << 12) | (0x4 << 15)) + + #define PMX_PL_86_87_MASK (0x3F << 18) + #define PMX_PL_86_MASK (0x7 << 18) + #define PMX_PL_87_MASK (0x7 << 21) + #define PMX_CLCD_PL_86_87_VAL 0 + #define PMX_MII2_PL_86_87_VAL ((0x1 << 18) | (0x1 << 21)) + #define PMX_EMI_PL_86_87_VAL ((0x2 << 18) | (0x2 << 21)) + #define PMX_PWM3_PL_86_VAL (0x4 << 18) + #define PMX_PWM2_PL_87_VAL (0x4 << 21) + + #define PMX_PL_88_89_MASK (0x3F << 24) + #define PMX_CLCD_PL_88_89_VAL 0 + #define PMX_MII2_PL_88_89_VAL ((0x1 << 24) | (0x1 << 27)) + #define PMX_EMI_PL_88_89_VAL ((0x2 << 24) | (0x2 << 27)) + #define PMX_UART6_PL_88_89_VAL ((0x3 << 24) | (0x3 << 27)) + #define PMX_PWM0_1_PL_88_89_VAL ((0x4 << 24) | (0x4 << 27)) + +#define IP_SEL_PAD_90_99_REG 0x00C8 + #define PMX_PL_90_91_MASK (0x3F << 0) + #define PMX_CLCD_PL_90_91_VAL 0 + #define PMX_MII2_PL_90_91_VAL ((0x1 << 0) | (0x1 << 3)) + #define PMX_EMI1_PL_90_91_VAL ((0x2 << 0) | (0x2 << 3)) + #define PMX_UART5_PL_90_91_VAL ((0x3 << 0) | (0x3 << 3)) + #define PMX_SSP2_PL_90_91_VAL ((0x4 << 0) | (0x4 << 3)) + + #define PMX_PL_92_93_MASK (0x3F << 6) + #define PMX_CLCD_PL_92_93_VAL 0 + #define PMX_MII2_PL_92_93_VAL ((0x1 << 6) | (0x1 << 9)) + #define PMX_EMI1_PL_92_93_VAL ((0x2 << 6) | (0x2 << 9)) + #define PMX_UART4_PL_92_93_VAL ((0x3 << 6) | (0x3 << 9)) + #define PMX_SSP2_PL_92_93_VAL ((0x4 << 6) | (0x4 << 9)) + + #define PMX_PL_94_95_MASK (0x3F << 12) + #define PMX_CLCD_PL_94_95_VAL 0 + #define PMX_MII2_PL_94_95_VAL ((0x1 << 12) | (0x1 << 15)) + #define PMX_EMI1_PL_94_95_VAL ((0x2 << 12) | (0x2 << 15)) + #define PMX_UART3_PL_94_95_VAL ((0x3 << 12) | (0x3 << 15)) + #define PMX_SSP1_PL_94_95_VAL ((0x4 << 12) | (0x4 << 15)) + + #define PMX_PL_96_97_MASK (0x3F << 18) + #define PMX_CLCD_PL_96_97_VAL 0 + #define PMX_MII2_PL_96_97_VAL ((0x1 << 18) | (0x1 << 21)) + #define PMX_EMI1_PL_96_97_VAL ((0x2 << 18) | (0x2 << 21)) + #define PMX_I2C2_PL_96_97_VAL ((0x3 << 18) | (0x3 << 21)) + #define PMX_SSP1_PL_96_97_VAL ((0x4 << 18) | (0x4 << 21)) + + #define PMX_PL_98_MASK (0x7 << 24) + #define PMX_CLCD_PL_98_VAL 0 + #define PMX_I2C1_PL_98_VAL (0x2 << 24) + #define PMX_UART3_PL_98_VAL (0x4 << 24) + + #define PMX_PL_99_MASK (0x7 << 27) + #define PMX_SDHCI_PL_99_VAL 0 + #define PMX_I2C1_PL_99_VAL (0x2 << 27) + #define PMX_UART3_PL_99_VAL (0x4 << 27) + +#define IP_SEL_MIX_PAD_REG 0x00CC + #define PMX_PL_100_101_MASK (0x3F << 0) + #define PMX_SDHCI_PL_100_101_VAL 0 + #define PMX_UART4_PL_100_101_VAL ((0x4 << 0) | (0x4 << 3)) + + #define PMX_SSP1_PORT_SEL_MASK (0x7 << 8) + #define PMX_SSP1_PORT_94_TO_97_VAL 0 + #define PMX_SSP1_PORT_65_TO_68_VAL (0x1 << 8) + #define PMX_SSP1_PORT_48_TO_51_VAL (0x2 << 8) + #define PMX_SSP1_PORT_36_TO_39_VAL (0x3 << 8) + #define PMX_SSP1_PORT_17_TO_20_VAL (0x4 << 8) + + #define PMX_SSP2_PORT_SEL_MASK (0x7 << 11) + #define PMX_SSP2_PORT_90_TO_93_VAL 0 + #define PMX_SSP2_PORT_61_TO_64_VAL (0x1 << 11) + #define PMX_SSP2_PORT_44_TO_47_VAL (0x2 << 11) + #define PMX_SSP2_PORT_32_TO_35_VAL (0x3 << 11) + #define PMX_SSP2_PORT_13_TO_16_VAL (0x4 << 11) + + #define PMX_UART1_ENH_PORT_SEL_MASK (0x3 << 14) + #define PMX_UART1_ENH_PORT_81_TO_85_VAL 0 + #define PMX_UART1_ENH_PORT_44_45_34_36_VAL (0x1 << 14) + #define PMX_UART1_ENH_PORT_32_TO_34_36_VAL (0x2 << 14) + #define PMX_UART1_ENH_PORT_3_TO_5_7_VAL (0x3 << 14) + + #define PMX_UART3_PORT_SEL_MASK (0x7 << 16) + #define PMX_UART3_PORT_94_VAL 0 + #define PMX_UART3_PORT_73_VAL (0x1 << 16) + #define PMX_UART3_PORT_52_VAL (0x2 << 16) + #define PMX_UART3_PORT_41_VAL (0x3 << 16) + #define PMX_UART3_PORT_15_VAL (0x4 << 16) + #define PMX_UART3_PORT_8_VAL (0x5 << 16) + #define PMX_UART3_PORT_99_VAL (0x6 << 16) + + #define PMX_UART4_PORT_SEL_MASK (0x7 << 19) + #define PMX_UART4_PORT_92_VAL 0 + #define PMX_UART4_PORT_71_VAL (0x1 << 19) + #define PMX_UART4_PORT_39_VAL (0x2 << 19) + #define PMX_UART4_PORT_13_VAL (0x3 << 19) + #define PMX_UART4_PORT_6_VAL (0x4 << 19) + #define PMX_UART4_PORT_101_VAL (0x5 << 19) + + #define PMX_UART5_PORT_SEL_MASK (0x3 << 22) + #define PMX_UART5_PORT_90_VAL 0 + #define PMX_UART5_PORT_69_VAL (0x1 << 22) + #define PMX_UART5_PORT_37_VAL (0x2 << 22) + #define PMX_UART5_PORT_4_VAL (0x3 << 22) + + #define PMX_UART6_PORT_SEL_MASK (0x1 << 24) + #define PMX_UART6_PORT_88_VAL 0 + #define PMX_UART6_PORT_2_VAL (0x1 << 24) + + #define PMX_I2C1_PORT_SEL_MASK (0x1 << 25) + #define PMX_I2C1_PORT_8_9_VAL 0 + #define PMX_I2C1_PORT_98_99_VAL (0x1 << 25) + + #define PMX_I2C2_PORT_SEL_MASK (0x3 << 26) + #define PMX_I2C2_PORT_96_97_VAL 0 + #define PMX_I2C2_PORT_75_76_VAL (0x1 << 26) + #define PMX_I2C2_PORT_19_20_VAL (0x2 << 26) + #define PMX_I2C2_PORT_2_3_VAL (0x3 << 26) + #define PMX_I2C2_PORT_0_1_VAL (0x4 << 26) + + #define PMX_SDHCI_CD_PORT_SEL_MASK (0x1 << 29) + #define PMX_SDHCI_CD_PORT_12_VAL 0 + #define PMX_SDHCI_CD_PORT_51_VAL (0x1 << 29) + +/* Pad multiplexing for CLCD device */ +static const unsigned clcd_pins[] = { 69, 70, 71, 72, 73, 74, 75, 76, 77, 78, + 79, 80, 81, 82, 83, 84, 85, 86, 87, 88, 89, 90, 91, 92, 93, 94, 95, 96, + 97 }; +static struct spear_muxreg clcd_muxreg[] = { + { + .reg = IP_SEL_PAD_60_69_REG, + .mask = PMX_PL_69_MASK, + .val = PMX_CLCD_PL_69_VAL, + }, { + .reg = IP_SEL_PAD_70_79_REG, + .mask = PMX_PL_70_MASK | PMX_PL_71_72_MASK | PMX_PL_73_MASK | + PMX_PL_74_MASK | PMX_PL_75_76_MASK | + PMX_PL_77_78_79_MASK, + .val = PMX_CLCD_PL_70_VAL | PMX_CLCD_PL_71_72_VAL | + PMX_CLCD_PL_73_VAL | PMX_CLCD_PL_74_VAL | + PMX_CLCD_PL_75_76_VAL | PMX_CLCD_PL_77_78_79_VAL, + }, { + .reg = IP_SEL_PAD_80_89_REG, + .mask = PMX_PL_80_TO_85_MASK | PMX_PL_86_87_MASK | + PMX_PL_88_89_MASK, + .val = PMX_CLCD_PL_80_TO_85_VAL | PMX_CLCD_PL_86_87_VAL | + PMX_CLCD_PL_88_89_VAL, + }, { + .reg = IP_SEL_PAD_90_99_REG, + .mask = PMX_PL_90_91_MASK | PMX_PL_92_93_MASK | + PMX_PL_94_95_MASK | PMX_PL_96_97_MASK | PMX_PL_98_MASK, + .val = PMX_CLCD_PL_90_91_VAL | PMX_CLCD_PL_92_93_VAL | + PMX_CLCD_PL_94_95_VAL | PMX_CLCD_PL_96_97_VAL | + PMX_CLCD_PL_98_VAL, + }, +}; + +static struct spear_modemux clcd_modemux[] = { + { + .modes = EXTENDED_MODE, + .muxregs = clcd_muxreg, + .nmuxregs = ARRAY_SIZE(clcd_muxreg), + }, +}; + +static struct spear_pingroup clcd_pingroup = { + .name = "clcd_grp", + .pins = clcd_pins, + .npins = ARRAY_SIZE(clcd_pins), + .modemuxs = clcd_modemux, + .nmodemuxs = ARRAY_SIZE(clcd_modemux), +}; + +static const char *const clcd_grps[] = { "clcd_grp" }; +static struct spear_function clcd_function = { + .name = "clcd", + .groups = clcd_grps, + .ngroups = ARRAY_SIZE(clcd_grps), +}; + +/* Pad multiplexing for EMI (Parallel NOR flash) device */ +static const unsigned emi_pins[] = { 46, 47, 48, 49, 50, 51, 52, 53, 54, 55, 56, + 57, 58, 59, 60, 61, 62, 63, 64, 65, 66, 67, 68, 69, 70, 71, 72, 73, 74, + 75, 76, 77, 78, 79, 80, 81, 82, 83, 84, 85, 86, 87, 88, 89, 90, 91, 92, + 93, 94, 95, 96, 97 }; +static struct spear_muxreg emi_muxreg[] = { + { + .reg = PMX_CONFIG_REG, + .mask = PMX_TIMER_0_1_MASK | PMX_TIMER_2_3_MASK, + .val = 0, + }, +}; + +static struct spear_muxreg emi_ext_muxreg[] = { + { + .reg = IP_SEL_PAD_40_49_REG, + .mask = PMX_PL_46_47_MASK | PMX_PL_48_49_MASK, + .val = PMX_FSMC_EMI_PL_46_47_VAL | PMX_FSMC_EMI_PL_48_49_VAL, + }, { + .reg = IP_SEL_PAD_50_59_REG, + .mask = PMX_PL_50_51_MASK | PMX_PL_52_53_MASK | + PMX_PL_54_55_56_MASK | PMX_PL_58_59_MASK, + .val = PMX_EMI_PL_50_51_VAL | PMX_EMI_PL_52_53_VAL | + PMX_FSMC_EMI_PL_54_55_56_VAL | + PMX_FSMC_EMI_PL_58_59_VAL, + }, { + .reg = IP_SEL_PAD_60_69_REG, + .mask = PMX_PL_69_MASK, + .val = PMX_EMI_PL_69_VAL, + }, { + .reg = IP_SEL_PAD_70_79_REG, + .mask = PMX_PL_70_MASK | PMX_PL_71_72_MASK | PMX_PL_73_MASK | + PMX_PL_74_MASK | PMX_PL_75_76_MASK | + PMX_PL_77_78_79_MASK, + .val = PMX_FSMC_EMI_PL_70_VAL | PMX_FSMC_EMI_PL_71_72_VAL | + PMX_FSMC_EMI_PL_73_VAL | PMX_EMI_PL_74_VAL | + PMX_EMI_PL_75_76_VAL | PMX_EMI_PL_77_78_79_VAL, + }, { + .reg = IP_SEL_PAD_80_89_REG, + .mask = PMX_PL_80_TO_85_MASK | PMX_PL_86_87_MASK | + PMX_PL_88_89_MASK, + .val = PMX_EMI_PL_80_TO_85_VAL | PMX_EMI_PL_86_87_VAL | + PMX_EMI_PL_88_89_VAL, + }, { + .reg = IP_SEL_PAD_90_99_REG, + .mask = PMX_PL_90_91_MASK | PMX_PL_92_93_MASK | + PMX_PL_94_95_MASK | PMX_PL_96_97_MASK, + .val = PMX_EMI1_PL_90_91_VAL | PMX_EMI1_PL_92_93_VAL | + PMX_EMI1_PL_94_95_VAL | PMX_EMI1_PL_96_97_VAL, + }, { + .reg = EXT_CTRL_REG, + .mask = EMI_FSMC_DYNAMIC_MUX_MASK, + .val = EMI_FSMC_DYNAMIC_MUX_MASK, + }, +}; + +static struct spear_modemux emi_modemux[] = { + { + .modes = AUTO_EXP_MODE | EXTENDED_MODE, + .muxregs = emi_muxreg, + .nmuxregs = ARRAY_SIZE(emi_muxreg), + }, { + .modes = EXTENDED_MODE, + .muxregs = emi_ext_muxreg, + .nmuxregs = ARRAY_SIZE(emi_ext_muxreg), + }, +}; + +static struct spear_pingroup emi_pingroup = { + .name = "emi_grp", + .pins = emi_pins, + .npins = ARRAY_SIZE(emi_pins), + .modemuxs = emi_modemux, + .nmodemuxs = ARRAY_SIZE(emi_modemux), +}; + +static const char *const emi_grps[] = { "emi_grp" }; +static struct spear_function emi_function = { + .name = "emi", + .groups = emi_grps, + .ngroups = ARRAY_SIZE(emi_grps), +}; + +/* Pad multiplexing for FSMC (NAND flash) device */ +static const unsigned fsmc_8bit_pins[] = { 52, 53, 54, 55, 56, 57, 58, 59, 60, + 61, 62, 63, 64, 65, 66, 67, 68 }; +static struct spear_muxreg fsmc_8bit_muxreg[] = { + { + .reg = IP_SEL_PAD_50_59_REG, + .mask = PMX_PL_52_53_MASK | PMX_PL_54_55_56_MASK | + PMX_PL_57_MASK | PMX_PL_58_59_MASK, + .val = PMX_FSMC_PL_52_53_VAL | PMX_FSMC_EMI_PL_54_55_56_VAL | + PMX_FSMC_PL_57_VAL | PMX_FSMC_EMI_PL_58_59_VAL, + }, { + .reg = IP_SEL_PAD_60_69_REG, + .mask = PMX_PL_60_MASK | PMX_PL_61_TO_64_MASK | + PMX_PL_65_TO_68_MASK, + .val = PMX_FSMC_PL_60_VAL | PMX_FSMC_PL_61_TO_64_VAL | + PMX_FSMC_PL_65_TO_68_VAL, + }, { + .reg = EXT_CTRL_REG, + .mask = EMI_FSMC_DYNAMIC_MUX_MASK, + .val = EMI_FSMC_DYNAMIC_MUX_MASK, + }, +}; + +static struct spear_modemux fsmc_8bit_modemux[] = { + { + .modes = EXTENDED_MODE, + .muxregs = fsmc_8bit_muxreg, + .nmuxregs = ARRAY_SIZE(fsmc_8bit_muxreg), + }, +}; + +static struct spear_pingroup fsmc_8bit_pingroup = { + .name = "fsmc_8bit_grp", + .pins = fsmc_8bit_pins, + .npins = ARRAY_SIZE(fsmc_8bit_pins), + .modemuxs = fsmc_8bit_modemux, + .nmodemuxs = ARRAY_SIZE(fsmc_8bit_modemux), +}; + +static const unsigned fsmc_16bit_pins[] = { 46, 47, 48, 49, 52, 53, 54, 55, 56, + 57, 58, 59, 60, 61, 62, 63, 64, 65, 66, 67, 68, 70, 71, 72, 73 }; +static struct spear_muxreg fsmc_16bit_autoexp_muxreg[] = { + { + .reg = PMX_CONFIG_REG, + .mask = PMX_TIMER_0_1_MASK | PMX_TIMER_2_3_MASK, + .val = 0, + }, +}; + +static struct spear_muxreg fsmc_16bit_muxreg[] = { + { + .reg = IP_SEL_PAD_40_49_REG, + .mask = PMX_PL_46_47_MASK | PMX_PL_48_49_MASK, + .val = PMX_FSMC_EMI_PL_46_47_VAL | PMX_FSMC_EMI_PL_48_49_VAL, + }, { + .reg = IP_SEL_PAD_70_79_REG, + .mask = PMX_PL_70_MASK | PMX_PL_71_72_MASK | PMX_PL_73_MASK, + .val = PMX_FSMC_EMI_PL_70_VAL | PMX_FSMC_EMI_PL_71_72_VAL | + PMX_FSMC_EMI_PL_73_VAL, + } +}; + +static struct spear_modemux fsmc_16bit_modemux[] = { + { + .modes = EXTENDED_MODE, + .muxregs = fsmc_8bit_muxreg, + .nmuxregs = ARRAY_SIZE(fsmc_8bit_muxreg), + }, { + .modes = AUTO_EXP_MODE | EXTENDED_MODE, + .muxregs = fsmc_16bit_autoexp_muxreg, + .nmuxregs = ARRAY_SIZE(fsmc_16bit_autoexp_muxreg), + }, { + .modes = EXTENDED_MODE, + .muxregs = fsmc_16bit_muxreg, + .nmuxregs = ARRAY_SIZE(fsmc_16bit_muxreg), + }, +}; + +static struct spear_pingroup fsmc_16bit_pingroup = { + .name = "fsmc_16bit_grp", + .pins = fsmc_16bit_pins, + .npins = ARRAY_SIZE(fsmc_16bit_pins), + .modemuxs = fsmc_16bit_modemux, + .nmodemuxs = ARRAY_SIZE(fsmc_16bit_modemux), +}; + +static const char *const fsmc_grps[] = { "fsmc_8bit_grp", "fsmc_16bit_grp" }; +static struct spear_function fsmc_function = { + .name = "fsmc", + .groups = fsmc_grps, + .ngroups = ARRAY_SIZE(fsmc_grps), +}; + +/* Pad multiplexing for SPP device */ +static const unsigned spp_pins[] = { 69, 70, 71, 72, 73, 74, 75, 76, 77, 78, 79, + 80, 81, 82, 83, 84, 85 }; +static struct spear_muxreg spp_muxreg[] = { + { + .reg = IP_SEL_PAD_60_69_REG, + .mask = PMX_PL_69_MASK, + .val = PMX_SPP_PL_69_VAL, + }, { + .reg = IP_SEL_PAD_70_79_REG, + .mask = PMX_PL_70_MASK | PMX_PL_71_72_MASK | PMX_PL_73_MASK | + PMX_PL_74_MASK | PMX_PL_75_76_MASK | + PMX_PL_77_78_79_MASK, + .val = PMX_SPP_PL_70_VAL | PMX_SPP_PL_71_72_VAL | + PMX_SPP_PL_73_VAL | PMX_SPP_PL_74_VAL | + PMX_SPP_PL_75_76_VAL | PMX_SPP_PL_77_78_79_VAL, + }, { + .reg = IP_SEL_PAD_80_89_REG, + .mask = PMX_PL_80_TO_85_MASK, + .val = PMX_SPP_PL_80_TO_85_VAL, + }, +}; + +static struct spear_modemux spp_modemux[] = { + { + .modes = EXTENDED_MODE, + .muxregs = spp_muxreg, + .nmuxregs = ARRAY_SIZE(spp_muxreg), + }, +}; + +static struct spear_pingroup spp_pingroup = { + .name = "spp_grp", + .pins = spp_pins, + .npins = ARRAY_SIZE(spp_pins), + .modemuxs = spp_modemux, + .nmodemuxs = ARRAY_SIZE(spp_modemux), +}; + +static const char *const spp_grps[] = { "spp_grp" }; +static struct spear_function spp_function = { + .name = "spp", + .groups = spp_grps, + .ngroups = ARRAY_SIZE(spp_grps), +}; + +/* Pad multiplexing for SDHCI device */ +static const unsigned sdhci_led_pins[] = { 34 }; +static struct spear_muxreg sdhci_led_muxreg[] = { + { + .reg = PMX_CONFIG_REG, + .mask = PMX_SSP_CS_MASK, + .val = 0, + }, +}; + +static struct spear_muxreg sdhci_led_ext_muxreg[] = { + { + .reg = IP_SEL_PAD_30_39_REG, + .mask = PMX_PL_34_MASK, + .val = PMX_PWM2_PL_34_VAL, + }, +}; + +static struct spear_modemux sdhci_led_modemux[] = { + { + .modes = AUTO_NET_SMII_MODE | AUTO_NET_MII_MODE | EXTENDED_MODE, + .muxregs = sdhci_led_muxreg, + .nmuxregs = ARRAY_SIZE(sdhci_led_muxreg), + }, { + .modes = EXTENDED_MODE, + .muxregs = sdhci_led_ext_muxreg, + .nmuxregs = ARRAY_SIZE(sdhci_led_ext_muxreg), + }, +}; + +static struct spear_pingroup sdhci_led_pingroup = { + .name = "sdhci_led_grp", + .pins = sdhci_led_pins, + .npins = ARRAY_SIZE(sdhci_led_pins), + .modemuxs = sdhci_led_modemux, + .nmodemuxs = ARRAY_SIZE(sdhci_led_modemux), +}; + +static const unsigned sdhci_cd_12_pins[] = { 12, 43, 44, 45, 46, 47, 48, 49, + 50}; +static const unsigned sdhci_cd_51_pins[] = { 43, 44, 45, 46, 47, 48, 49, 50, 51 +}; +static struct spear_muxreg sdhci_muxreg[] = { + { + .reg = PMX_CONFIG_REG, + .mask = PMX_TIMER_0_1_MASK | PMX_TIMER_2_3_MASK, + .val = 0, + }, +}; + +static struct spear_muxreg sdhci_ext_muxreg[] = { + { + .reg = IP_SEL_PAD_40_49_REG, + .mask = PMX_PL_43_MASK | PMX_PL_44_45_MASK | PMX_PL_46_47_MASK | + PMX_PL_48_49_MASK, + .val = PMX_SDHCI_PL_43_VAL | PMX_SDHCI_PL_44_45_VAL | + PMX_SDHCI_PL_46_47_VAL | PMX_SDHCI_PL_48_49_VAL, + }, { + .reg = IP_SEL_PAD_50_59_REG, + .mask = PMX_PL_50_MASK, + .val = PMX_SDHCI_PL_50_VAL, + }, { + .reg = IP_SEL_PAD_90_99_REG, + .mask = PMX_PL_99_MASK, + .val = PMX_SDHCI_PL_99_VAL, + }, { + .reg = IP_SEL_MIX_PAD_REG, + .mask = PMX_PL_100_101_MASK, + .val = PMX_SDHCI_PL_100_101_VAL, + }, +}; + +static struct spear_muxreg sdhci_cd_12_muxreg[] = { + { + .reg = PMX_CONFIG_REG, + .mask = PMX_MII_MASK, + .val = 0, + }, { + .reg = IP_SEL_PAD_10_19_REG, + .mask = PMX_PL_12_MASK, + .val = PMX_SDHCI_CD_PL_12_VAL, + }, { + .reg = IP_SEL_MIX_PAD_REG, + .mask = PMX_SDHCI_CD_PORT_SEL_MASK, + .val = PMX_SDHCI_CD_PORT_12_VAL, + }, +}; + +static struct spear_muxreg sdhci_cd_51_muxreg[] = { + { + .reg = IP_SEL_PAD_50_59_REG, + .mask = PMX_PL_51_MASK, + .val = PMX_SDHCI_CD_PL_51_VAL, + }, { + .reg = IP_SEL_MIX_PAD_REG, + .mask = PMX_SDHCI_CD_PORT_SEL_MASK, + .val = PMX_SDHCI_CD_PORT_51_VAL, + }, +}; + +#define pmx_sdhci_common_modemux \ + { \ + .modes = AUTO_NET_SMII_MODE | AUTO_NET_MII_MODE | \ + SMALL_PRINTERS_MODE | EXTENDED_MODE, \ + .muxregs = sdhci_muxreg, \ + .nmuxregs = ARRAY_SIZE(sdhci_muxreg), \ + }, { \ + .modes = EXTENDED_MODE, \ + .muxregs = sdhci_ext_muxreg, \ + .nmuxregs = ARRAY_SIZE(sdhci_ext_muxreg), \ + } + +static struct spear_modemux sdhci_modemux[][3] = { + { + /* select pin 12 for cd */ + pmx_sdhci_common_modemux, + { + .modes = EXTENDED_MODE, + .muxregs = sdhci_cd_12_muxreg, + .nmuxregs = ARRAY_SIZE(sdhci_cd_12_muxreg), + }, + }, { + /* select pin 51 for cd */ + pmx_sdhci_common_modemux, + { + .modes = EXTENDED_MODE, + .muxregs = sdhci_cd_51_muxreg, + .nmuxregs = ARRAY_SIZE(sdhci_cd_51_muxreg), + }, + } +}; + +static struct spear_pingroup sdhci_pingroup[] = { + { + .name = "sdhci_cd_12_grp", + .pins = sdhci_cd_12_pins, + .npins = ARRAY_SIZE(sdhci_cd_12_pins), + .modemuxs = sdhci_modemux[0], + .nmodemuxs = ARRAY_SIZE(sdhci_modemux[0]), + }, { + .name = "sdhci_cd_51_grp", + .pins = sdhci_cd_51_pins, + .npins = ARRAY_SIZE(sdhci_cd_51_pins), + .modemuxs = sdhci_modemux[1], + .nmodemuxs = ARRAY_SIZE(sdhci_modemux[1]), + }, +}; + +static const char *const sdhci_grps[] = { "sdhci_cd_12_grp", "sdhci_cd_51_grp", + "sdhci_led_grp" }; + +static struct spear_function sdhci_function = { + .name = "sdhci", + .groups = sdhci_grps, + .ngroups = ARRAY_SIZE(sdhci_grps), +}; + +/* Pad multiplexing for I2S device */ +static const unsigned i2s_pins[] = { 35, 39, 40, 41, 42 }; +static struct spear_muxreg i2s_muxreg[] = { + { + .reg = PMX_CONFIG_REG, + .mask = PMX_SSP_CS_MASK, + .val = 0, + }, { + .reg = PMX_CONFIG_REG, + .mask = PMX_UART0_MODEM_MASK, + .val = 0, + }, +}; + +static struct spear_muxreg i2s_ext_muxreg[] = { + { + .reg = IP_SEL_PAD_30_39_REG, + .mask = PMX_PL_35_MASK | PMX_PL_39_MASK, + .val = PMX_I2S_REF_CLK_PL_35_VAL | PMX_I2S_PL_39_VAL, + }, { + .reg = IP_SEL_PAD_40_49_REG, + .mask = PMX_PL_40_MASK | PMX_PL_41_42_MASK, + .val = PMX_I2S_PL_40_VAL | PMX_I2S_PL_41_42_VAL, + }, +}; + +static struct spear_modemux i2s_modemux[] = { + { + .modes = AUTO_NET_SMII_MODE | AUTO_NET_MII_MODE | EXTENDED_MODE, + .muxregs = i2s_muxreg, + .nmuxregs = ARRAY_SIZE(i2s_muxreg), + }, { + .modes = EXTENDED_MODE, + .muxregs = i2s_ext_muxreg, + .nmuxregs = ARRAY_SIZE(i2s_ext_muxreg), + }, +}; + +static struct spear_pingroup i2s_pingroup = { + .name = "i2s_grp", + .pins = i2s_pins, + .npins = ARRAY_SIZE(i2s_pins), + .modemuxs = i2s_modemux, + .nmodemuxs = ARRAY_SIZE(i2s_modemux), +}; + +static const char *const i2s_grps[] = { "i2s_grp" }; +static struct spear_function i2s_function = { + .name = "i2s", + .groups = i2s_grps, + .ngroups = ARRAY_SIZE(i2s_grps), +}; + +/* Pad multiplexing for UART1 device */ +static const unsigned uart1_pins[] = { 28, 29 }; +static struct spear_muxreg uart1_muxreg[] = { + { + .reg = PMX_CONFIG_REG, + .mask = PMX_GPIO_PIN0_MASK | PMX_GPIO_PIN1_MASK, + .val = 0, + }, +}; + +static struct spear_muxreg uart1_ext_muxreg[] = { + { + .reg = IP_SEL_PAD_20_29_REG, + .mask = PMX_PL_28_29_MASK, + .val = PMX_UART1_PL_28_29_VAL, + }, +}; + +static struct spear_modemux uart1_modemux[] = { + { + .modes = AUTO_NET_SMII_MODE | AUTO_NET_MII_MODE | AUTO_EXP_MODE + | SMALL_PRINTERS_MODE | EXTENDED_MODE, + .muxregs = uart1_muxreg, + .nmuxregs = ARRAY_SIZE(uart1_muxreg), + }, { + .modes = EXTENDED_MODE, + .muxregs = uart1_ext_muxreg, + .nmuxregs = ARRAY_SIZE(uart1_ext_muxreg), + }, +}; + +static struct spear_pingroup uart1_pingroup = { + .name = "uart1_grp", + .pins = uart1_pins, + .npins = ARRAY_SIZE(uart1_pins), + .modemuxs = uart1_modemux, + .nmodemuxs = ARRAY_SIZE(uart1_modemux), +}; + +static const char *const uart1_grps[] = { "uart1_grp" }; +static struct spear_function uart1_function = { + .name = "uart1", + .groups = uart1_grps, + .ngroups = ARRAY_SIZE(uart1_grps), +}; + +/* Pad multiplexing for UART1 Modem device */ +static const unsigned uart1_modem_2_to_7_pins[] = { 2, 3, 4, 5, 6, 7 }; +static const unsigned uart1_modem_31_to_36_pins[] = { 31, 32, 33, 34, 35, 36 }; +static const unsigned uart1_modem_34_to_45_pins[] = { 34, 35, 36, 43, 44, 45 }; +static const unsigned uart1_modem_80_to_85_pins[] = { 80, 81, 82, 83, 84, 85 }; + +static struct spear_muxreg uart1_modem_ext_2_to_7_muxreg[] = { + { + .reg = PMX_CONFIG_REG, + .mask = PMX_UART0_MASK | PMX_I2C_MASK | PMX_SSP_MASK, + .val = 0, + }, { + .reg = IP_SEL_PAD_0_9_REG, + .mask = PMX_PL_2_3_MASK | PMX_PL_6_7_MASK, + .val = PMX_UART1_ENH_PL_2_3_VAL | PMX_UART1_ENH_PL_4_5_VAL | + PMX_UART1_ENH_PL_6_7_VAL, + }, { + .reg = IP_SEL_MIX_PAD_REG, + .mask = PMX_UART1_ENH_PORT_SEL_MASK, + .val = PMX_UART1_ENH_PORT_3_TO_5_7_VAL, + }, +}; + +static struct spear_muxreg uart1_modem_31_to_36_muxreg[] = { + { + .reg = PMX_CONFIG_REG, + .mask = PMX_GPIO_PIN3_MASK | PMX_GPIO_PIN4_MASK | + PMX_GPIO_PIN5_MASK | PMX_SSP_CS_MASK, + .val = 0, + }, +}; + +static struct spear_muxreg uart1_modem_ext_31_to_36_muxreg[] = { + { + .reg = IP_SEL_PAD_30_39_REG, + .mask = PMX_PL_31_MASK | PMX_PL_32_33_MASK | PMX_PL_34_MASK | + PMX_PL_35_MASK | PMX_PL_36_MASK, + .val = PMX_UART1_ENH_PL_31_VAL | PMX_UART1_ENH_PL_32_33_VAL | + PMX_UART1_ENH_PL_34_VAL | PMX_UART1_ENH_PL_35_VAL | + PMX_UART1_ENH_PL_36_VAL, + }, { + .reg = IP_SEL_MIX_PAD_REG, + .mask = PMX_UART1_ENH_PORT_SEL_MASK, + .val = PMX_UART1_ENH_PORT_32_TO_34_36_VAL, + }, +}; + +static struct spear_muxreg uart1_modem_34_to_45_muxreg[] = { + { + .reg = PMX_CONFIG_REG, + .mask = PMX_TIMER_0_1_MASK | PMX_TIMER_2_3_MASK | + PMX_SSP_CS_MASK, + .val = 0, + }, +}; + +static struct spear_muxreg uart1_modem_ext_34_to_45_muxreg[] = { + { + .reg = IP_SEL_PAD_30_39_REG, + .mask = PMX_PL_34_MASK | PMX_PL_35_MASK | PMX_PL_36_MASK, + .val = PMX_UART1_ENH_PL_34_VAL | PMX_UART1_ENH_PL_35_VAL | + PMX_UART1_ENH_PL_36_VAL, + }, { + .reg = IP_SEL_PAD_40_49_REG, + .mask = PMX_PL_43_MASK | PMX_PL_44_45_MASK, + .val = PMX_UART1_ENH_PL_43_VAL | PMX_UART1_ENH_PL_44_45_VAL, + }, { + .reg = IP_SEL_MIX_PAD_REG, + .mask = PMX_UART1_ENH_PORT_SEL_MASK, + .val = PMX_UART1_ENH_PORT_44_45_34_36_VAL, + }, +}; + +static struct spear_muxreg uart1_modem_ext_80_to_85_muxreg[] = { + { + .reg = IP_SEL_PAD_80_89_REG, + .mask = PMX_PL_80_TO_85_MASK, + .val = PMX_UART1_ENH_PL_80_TO_85_VAL, + }, { + .reg = IP_SEL_PAD_40_49_REG, + .mask = PMX_PL_43_MASK | PMX_PL_44_45_MASK, + .val = PMX_UART1_ENH_PL_43_VAL | PMX_UART1_ENH_PL_44_45_VAL, + }, { + .reg = IP_SEL_MIX_PAD_REG, + .mask = PMX_UART1_ENH_PORT_SEL_MASK, + .val = PMX_UART1_ENH_PORT_81_TO_85_VAL, + }, +}; + +static struct spear_modemux uart1_modem_2_to_7_modemux[] = { + { + .modes = EXTENDED_MODE, + .muxregs = uart1_modem_ext_2_to_7_muxreg, + .nmuxregs = ARRAY_SIZE(uart1_modem_ext_2_to_7_muxreg), + }, +}; + +static struct spear_modemux uart1_modem_31_to_36_modemux[] = { + { + .modes = SMALL_PRINTERS_MODE | EXTENDED_MODE, + .muxregs = uart1_modem_31_to_36_muxreg, + .nmuxregs = ARRAY_SIZE(uart1_modem_31_to_36_muxreg), + }, { + .modes = EXTENDED_MODE, + .muxregs = uart1_modem_ext_31_to_36_muxreg, + .nmuxregs = ARRAY_SIZE(uart1_modem_ext_31_to_36_muxreg), + }, +}; + +static struct spear_modemux uart1_modem_34_to_45_modemux[] = { + { + .modes = AUTO_EXP_MODE | EXTENDED_MODE, + .muxregs = uart1_modem_34_to_45_muxreg, + .nmuxregs = ARRAY_SIZE(uart1_modem_34_to_45_muxreg), + }, { + .modes = EXTENDED_MODE, + .muxregs = uart1_modem_ext_34_to_45_muxreg, + .nmuxregs = ARRAY_SIZE(uart1_modem_ext_34_to_45_muxreg), + }, +}; + +static struct spear_modemux uart1_modem_80_to_85_modemux[] = { + { + .modes = EXTENDED_MODE, + .muxregs = uart1_modem_ext_80_to_85_muxreg, + .nmuxregs = ARRAY_SIZE(uart1_modem_ext_80_to_85_muxreg), + }, +}; + +static struct spear_pingroup uart1_modem_pingroup[] = { + { + .name = "uart1_modem_2_to_7_grp", + .pins = uart1_modem_2_to_7_pins, + .npins = ARRAY_SIZE(uart1_modem_2_to_7_pins), + .modemuxs = uart1_modem_2_to_7_modemux, + .nmodemuxs = ARRAY_SIZE(uart1_modem_2_to_7_modemux), + }, { + .name = "uart1_modem_31_to_36_grp", + .pins = uart1_modem_31_to_36_pins, + .npins = ARRAY_SIZE(uart1_modem_31_to_36_pins), + .modemuxs = uart1_modem_31_to_36_modemux, + .nmodemuxs = ARRAY_SIZE(uart1_modem_31_to_36_modemux), + }, { + .name = "uart1_modem_34_to_45_grp", + .pins = uart1_modem_34_to_45_pins, + .npins = ARRAY_SIZE(uart1_modem_34_to_45_pins), + .modemuxs = uart1_modem_34_to_45_modemux, + .nmodemuxs = ARRAY_SIZE(uart1_modem_34_to_45_modemux), + }, { + .name = "uart1_modem_80_to_85_grp", + .pins = uart1_modem_80_to_85_pins, + .npins = ARRAY_SIZE(uart1_modem_80_to_85_pins), + .modemuxs = uart1_modem_80_to_85_modemux, + .nmodemuxs = ARRAY_SIZE(uart1_modem_80_to_85_modemux), + }, +}; + +static const char *const uart1_modem_grps[] = { "uart1_modem_2_to_7_grp", + "uart1_modem_31_to_36_grp", "uart1_modem_34_to_45_grp", + "uart1_modem_80_to_85_grp" }; +static struct spear_function uart1_modem_function = { + .name = "uart1_modem", + .groups = uart1_modem_grps, + .ngroups = ARRAY_SIZE(uart1_modem_grps), +}; + +/* Pad multiplexing for UART2 device */ +static const unsigned uart2_pins[] = { 0, 1 }; +static struct spear_muxreg uart2_muxreg[] = { + { + .reg = PMX_CONFIG_REG, + .mask = PMX_FIRDA_MASK, + .val = 0, + }, +}; + +static struct spear_muxreg uart2_ext_muxreg[] = { + { + .reg = IP_SEL_PAD_0_9_REG, + .mask = PMX_PL_0_1_MASK, + .val = PMX_UART2_PL_0_1_VAL, + }, +}; + +static struct spear_modemux uart2_modemux[] = { + { + .modes = AUTO_NET_SMII_MODE | AUTO_NET_MII_MODE | AUTO_EXP_MODE + | SMALL_PRINTERS_MODE | EXTENDED_MODE, + .muxregs = uart2_muxreg, + .nmuxregs = ARRAY_SIZE(uart2_muxreg), + }, { + .modes = EXTENDED_MODE, + .muxregs = uart2_ext_muxreg, + .nmuxregs = ARRAY_SIZE(uart2_ext_muxreg), + }, +}; + +static struct spear_pingroup uart2_pingroup = { + .name = "uart2_grp", + .pins = uart2_pins, + .npins = ARRAY_SIZE(uart2_pins), + .modemuxs = uart2_modemux, + .nmodemuxs = ARRAY_SIZE(uart2_modemux), +}; + +static const char *const uart2_grps[] = { "uart2_grp" }; +static struct spear_function uart2_function = { + .name = "uart2", + .groups = uart2_grps, + .ngroups = ARRAY_SIZE(uart2_grps), +}; + +/* Pad multiplexing for uart3 device */ +static const unsigned uart3_pins[][2] = { { 8, 9 }, { 15, 16 }, { 41, 42 }, + { 52, 53 }, { 73, 74 }, { 94, 95 }, { 98, 99 } }; + +static struct spear_muxreg uart3_ext_8_9_muxreg[] = { + { + .reg = PMX_CONFIG_REG, + .mask = PMX_SSP_MASK, + .val = 0, + }, { + .reg = IP_SEL_PAD_0_9_REG, + .mask = PMX_PL_8_9_MASK, + .val = PMX_UART3_PL_8_9_VAL, + }, { + .reg = IP_SEL_MIX_PAD_REG, + .mask = PMX_UART3_PORT_SEL_MASK, + .val = PMX_UART3_PORT_8_VAL, + }, +}; + +static struct spear_muxreg uart3_ext_15_16_muxreg[] = { + { + .reg = PMX_CONFIG_REG, + .mask = PMX_MII_MASK, + .val = 0, + }, { + .reg = IP_SEL_PAD_10_19_REG, + .mask = PMX_PL_15_16_MASK, + .val = PMX_UART3_PL_15_16_VAL, + }, { + .reg = IP_SEL_MIX_PAD_REG, + .mask = PMX_UART3_PORT_SEL_MASK, + .val = PMX_UART3_PORT_15_VAL, + }, +}; + +static struct spear_muxreg uart3_ext_41_42_muxreg[] = { + { + .reg = PMX_CONFIG_REG, + .mask = PMX_UART0_MODEM_MASK, + .val = 0, + }, { + .reg = IP_SEL_PAD_40_49_REG, + .mask = PMX_PL_41_42_MASK, + .val = PMX_UART3_PL_41_42_VAL, + }, { + .reg = IP_SEL_MIX_PAD_REG, + .mask = PMX_UART3_PORT_SEL_MASK, + .val = PMX_UART3_PORT_41_VAL, + }, +}; + +static struct spear_muxreg uart3_ext_52_53_muxreg[] = { + { + .reg = IP_SEL_PAD_50_59_REG, + .mask = PMX_PL_52_53_MASK, + .val = PMX_UART3_PL_52_53_VAL, + }, { + .reg = IP_SEL_MIX_PAD_REG, + .mask = PMX_UART3_PORT_SEL_MASK, + .val = PMX_UART3_PORT_52_VAL, + }, +}; + +static struct spear_muxreg uart3_ext_73_74_muxreg[] = { + { + .reg = IP_SEL_PAD_70_79_REG, + .mask = PMX_PL_73_MASK | PMX_PL_74_MASK, + .val = PMX_UART3_PL_73_VAL | PMX_UART3_PL_74_VAL, + }, { + .reg = IP_SEL_MIX_PAD_REG, + .mask = PMX_UART3_PORT_SEL_MASK, + .val = PMX_UART3_PORT_73_VAL, + }, +}; + +static struct spear_muxreg uart3_ext_94_95_muxreg[] = { + { + .reg = IP_SEL_PAD_90_99_REG, + .mask = PMX_PL_94_95_MASK, + .val = PMX_UART3_PL_94_95_VAL, + }, { + .reg = IP_SEL_MIX_PAD_REG, + .mask = PMX_UART3_PORT_SEL_MASK, + .val = PMX_UART3_PORT_94_VAL, + }, +}; + +static struct spear_muxreg uart3_ext_98_99_muxreg[] = { + { + .reg = IP_SEL_PAD_90_99_REG, + .mask = PMX_PL_98_MASK | PMX_PL_99_MASK, + .val = PMX_UART3_PL_98_VAL | PMX_UART3_PL_99_VAL, + }, { + .reg = IP_SEL_MIX_PAD_REG, + .mask = PMX_UART3_PORT_SEL_MASK, + .val = PMX_UART3_PORT_99_VAL, + }, +}; + +static struct spear_modemux uart3_modemux[][1] = { + { + /* Select signals on pins 8_9 */ + { + .modes = EXTENDED_MODE, + .muxregs = uart3_ext_8_9_muxreg, + .nmuxregs = ARRAY_SIZE(uart3_ext_8_9_muxreg), + }, + }, { + /* Select signals on pins 15_16 */ + { + .modes = EXTENDED_MODE, + .muxregs = uart3_ext_15_16_muxreg, + .nmuxregs = ARRAY_SIZE(uart3_ext_15_16_muxreg), + }, + }, { + /* Select signals on pins 41_42 */ + { + .modes = EXTENDED_MODE, + .muxregs = uart3_ext_41_42_muxreg, + .nmuxregs = ARRAY_SIZE(uart3_ext_41_42_muxreg), + }, + }, { + /* Select signals on pins 52_53 */ + { + .modes = EXTENDED_MODE, + .muxregs = uart3_ext_52_53_muxreg, + .nmuxregs = ARRAY_SIZE(uart3_ext_52_53_muxreg), + }, + }, { + /* Select signals on pins 73_74 */ + { + .modes = EXTENDED_MODE, + .muxregs = uart3_ext_73_74_muxreg, + .nmuxregs = ARRAY_SIZE(uart3_ext_73_74_muxreg), + }, + }, { + /* Select signals on pins 94_95 */ + { + .modes = EXTENDED_MODE, + .muxregs = uart3_ext_94_95_muxreg, + .nmuxregs = ARRAY_SIZE(uart3_ext_94_95_muxreg), + }, + }, { + /* Select signals on pins 98_99 */ + { + .modes = EXTENDED_MODE, + .muxregs = uart3_ext_98_99_muxreg, + .nmuxregs = ARRAY_SIZE(uart3_ext_98_99_muxreg), + }, + }, +}; + +static struct spear_pingroup uart3_pingroup[] = { + { + .name = "uart3_8_9_grp", + .pins = uart3_pins[0], + .npins = ARRAY_SIZE(uart3_pins[0]), + .modemuxs = uart3_modemux[0], + .nmodemuxs = ARRAY_SIZE(uart3_modemux[0]), + }, { + .name = "uart3_15_16_grp", + .pins = uart3_pins[1], + .npins = ARRAY_SIZE(uart3_pins[1]), + .modemuxs = uart3_modemux[1], + .nmodemuxs = ARRAY_SIZE(uart3_modemux[1]), + }, { + .name = "uart3_41_42_grp", + .pins = uart3_pins[2], + .npins = ARRAY_SIZE(uart3_pins[2]), + .modemuxs = uart3_modemux[2], + .nmodemuxs = ARRAY_SIZE(uart3_modemux[2]), + }, { + .name = "uart3_52_53_grp", + .pins = uart3_pins[3], + .npins = ARRAY_SIZE(uart3_pins[3]), + .modemuxs = uart3_modemux[3], + .nmodemuxs = ARRAY_SIZE(uart3_modemux[3]), + }, { + .name = "uart3_73_74_grp", + .pins = uart3_pins[4], + .npins = ARRAY_SIZE(uart3_pins[4]), + .modemuxs = uart3_modemux[4], + .nmodemuxs = ARRAY_SIZE(uart3_modemux[4]), + }, { + .name = "uart3_94_95_grp", + .pins = uart3_pins[5], + .npins = ARRAY_SIZE(uart3_pins[5]), + .modemuxs = uart3_modemux[5], + .nmodemuxs = ARRAY_SIZE(uart3_modemux[5]), + }, { + .name = "uart3_98_99_grp", + .pins = uart3_pins[6], + .npins = ARRAY_SIZE(uart3_pins[6]), + .modemuxs = uart3_modemux[6], + .nmodemuxs = ARRAY_SIZE(uart3_modemux[6]), + }, +}; + +static const char *const uart3_grps[] = { "uart3_8_9_grp", "uart3_15_16_grp", + "uart3_41_42_grp", "uart3_52_53_grp", "uart3_73_74_grp", + "uart3_94_95_grp", "uart3_98_99_grp" }; + +static struct spear_function uart3_function = { + .name = "uart3", + .groups = uart3_grps, + .ngroups = ARRAY_SIZE(uart3_grps), +}; + +/* Pad multiplexing for uart4 device */ +static const unsigned uart4_pins[][2] = { { 6, 7 }, { 13, 14 }, { 39, 40 }, + { 71, 72 }, { 92, 93 }, { 100, 101 } }; + +static struct spear_muxreg uart4_ext_6_7_muxreg[] = { + { + .reg = PMX_CONFIG_REG, + .mask = PMX_SSP_MASK, + .val = 0, + }, { + .reg = IP_SEL_PAD_0_9_REG, + .mask = PMX_PL_6_7_MASK, + .val = PMX_UART4_PL_6_7_VAL, + }, { + .reg = IP_SEL_MIX_PAD_REG, + .mask = PMX_UART4_PORT_SEL_MASK, + .val = PMX_UART4_PORT_6_VAL, + }, +}; + +static struct spear_muxreg uart4_ext_13_14_muxreg[] = { + { + .reg = PMX_CONFIG_REG, + .mask = PMX_MII_MASK, + .val = 0, + }, { + .reg = IP_SEL_PAD_10_19_REG, + .mask = PMX_PL_13_14_MASK, + .val = PMX_UART4_PL_13_14_VAL, + }, { + .reg = IP_SEL_MIX_PAD_REG, + .mask = PMX_UART4_PORT_SEL_MASK, + .val = PMX_UART4_PORT_13_VAL, + }, +}; + +static struct spear_muxreg uart4_ext_39_40_muxreg[] = { + { + .reg = PMX_CONFIG_REG, + .mask = PMX_UART0_MODEM_MASK, + .val = 0, + }, { + .reg = IP_SEL_PAD_30_39_REG, + .mask = PMX_PL_39_MASK, + .val = PMX_UART4_PL_39_VAL, + }, { + .reg = IP_SEL_PAD_40_49_REG, + .mask = PMX_PL_40_MASK, + .val = PMX_UART4_PL_40_VAL, + }, { + .reg = IP_SEL_MIX_PAD_REG, + .mask = PMX_UART4_PORT_SEL_MASK, + .val = PMX_UART4_PORT_39_VAL, + }, +}; + +static struct spear_muxreg uart4_ext_71_72_muxreg[] = { + { + .reg = IP_SEL_PAD_70_79_REG, + .mask = PMX_PL_71_72_MASK, + .val = PMX_UART4_PL_71_72_VAL, + }, { + .reg = IP_SEL_MIX_PAD_REG, + .mask = PMX_UART4_PORT_SEL_MASK, + .val = PMX_UART4_PORT_71_VAL, + }, +}; + +static struct spear_muxreg uart4_ext_92_93_muxreg[] = { + { + .reg = IP_SEL_PAD_90_99_REG, + .mask = PMX_PL_92_93_MASK, + .val = PMX_UART4_PL_92_93_VAL, + }, { + .reg = IP_SEL_MIX_PAD_REG, + .mask = PMX_UART4_PORT_SEL_MASK, + .val = PMX_UART4_PORT_92_VAL, + }, +}; + +static struct spear_muxreg uart4_ext_100_101_muxreg[] = { + { + .reg = IP_SEL_MIX_PAD_REG, + .mask = PMX_PL_100_101_MASK | + PMX_UART4_PORT_SEL_MASK, + .val = PMX_UART4_PL_100_101_VAL | + PMX_UART4_PORT_101_VAL, + }, +}; + +static struct spear_modemux uart4_modemux[][1] = { + { + /* Select signals on pins 6_7 */ + { + .modes = EXTENDED_MODE, + .muxregs = uart4_ext_6_7_muxreg, + .nmuxregs = ARRAY_SIZE(uart4_ext_6_7_muxreg), + }, + }, { + /* Select signals on pins 13_14 */ + { + .modes = EXTENDED_MODE, + .muxregs = uart4_ext_13_14_muxreg, + .nmuxregs = ARRAY_SIZE(uart4_ext_13_14_muxreg), + }, + }, { + /* Select signals on pins 39_40 */ + { + .modes = EXTENDED_MODE, + .muxregs = uart4_ext_39_40_muxreg, + .nmuxregs = ARRAY_SIZE(uart4_ext_39_40_muxreg), + }, + }, { + /* Select signals on pins 71_72 */ + { + .modes = EXTENDED_MODE, + .muxregs = uart4_ext_71_72_muxreg, + .nmuxregs = ARRAY_SIZE(uart4_ext_71_72_muxreg), + }, + }, { + /* Select signals on pins 92_93 */ + { + .modes = EXTENDED_MODE, + .muxregs = uart4_ext_92_93_muxreg, + .nmuxregs = ARRAY_SIZE(uart4_ext_92_93_muxreg), + }, + }, { + /* Select signals on pins 100_101_ */ + { + .modes = EXTENDED_MODE, + .muxregs = uart4_ext_100_101_muxreg, + .nmuxregs = ARRAY_SIZE(uart4_ext_100_101_muxreg), + }, + }, +}; + +static struct spear_pingroup uart4_pingroup[] = { + { + .name = "uart4_6_7_grp", + .pins = uart4_pins[0], + .npins = ARRAY_SIZE(uart4_pins[0]), + .modemuxs = uart4_modemux[0], + .nmodemuxs = ARRAY_SIZE(uart4_modemux[0]), + }, { + .name = "uart4_13_14_grp", + .pins = uart4_pins[1], + .npins = ARRAY_SIZE(uart4_pins[1]), + .modemuxs = uart4_modemux[1], + .nmodemuxs = ARRAY_SIZE(uart4_modemux[1]), + }, { + .name = "uart4_39_40_grp", + .pins = uart4_pins[2], + .npins = ARRAY_SIZE(uart4_pins[2]), + .modemuxs = uart4_modemux[2], + .nmodemuxs = ARRAY_SIZE(uart4_modemux[2]), + }, { + .name = "uart4_71_72_grp", + .pins = uart4_pins[3], + .npins = ARRAY_SIZE(uart4_pins[3]), + .modemuxs = uart4_modemux[3], + .nmodemuxs = ARRAY_SIZE(uart4_modemux[3]), + }, { + .name = "uart4_92_93_grp", + .pins = uart4_pins[4], + .npins = ARRAY_SIZE(uart4_pins[4]), + .modemuxs = uart4_modemux[4], + .nmodemuxs = ARRAY_SIZE(uart4_modemux[4]), + }, { + .name = "uart4_100_101_grp", + .pins = uart4_pins[5], + .npins = ARRAY_SIZE(uart4_pins[5]), + .modemuxs = uart4_modemux[5], + .nmodemuxs = ARRAY_SIZE(uart4_modemux[5]), + }, +}; + +static const char *const uart4_grps[] = { "uart4_6_7_grp", "uart4_13_14_grp", + "uart4_39_40_grp", "uart4_71_72_grp", "uart4_92_93_grp", + "uart4_100_101_grp" }; + +static struct spear_function uart4_function = { + .name = "uart4", + .groups = uart4_grps, + .ngroups = ARRAY_SIZE(uart4_grps), +}; + +/* Pad multiplexing for uart5 device */ +static const unsigned uart5_pins[][2] = { { 4, 5 }, { 37, 38 }, { 69, 70 }, + { 90, 91 } }; + +static struct spear_muxreg uart5_ext_4_5_muxreg[] = { + { + .reg = PMX_CONFIG_REG, + .mask = PMX_I2C_MASK, + .val = 0, + }, { + .reg = IP_SEL_PAD_0_9_REG, + .mask = PMX_PL_4_5_MASK, + .val = PMX_UART5_PL_4_5_VAL, + }, { + .reg = IP_SEL_MIX_PAD_REG, + .mask = PMX_UART5_PORT_SEL_MASK, + .val = PMX_UART5_PORT_4_VAL, + }, +}; + +static struct spear_muxreg uart5_ext_37_38_muxreg[] = { + { + .reg = PMX_CONFIG_REG, + .mask = PMX_UART0_MODEM_MASK, + .val = 0, + }, { + .reg = IP_SEL_PAD_30_39_REG, + .mask = PMX_PL_37_38_MASK, + .val = PMX_UART5_PL_37_38_VAL, + }, { + .reg = IP_SEL_MIX_PAD_REG, + .mask = PMX_UART5_PORT_SEL_MASK, + .val = PMX_UART5_PORT_37_VAL, + }, +}; + +static struct spear_muxreg uart5_ext_69_70_muxreg[] = { + { + .reg = IP_SEL_PAD_60_69_REG, + .mask = PMX_PL_69_MASK, + .val = PMX_UART5_PL_69_VAL, + }, { + .reg = IP_SEL_PAD_70_79_REG, + .mask = PMX_PL_70_MASK, + .val = PMX_UART5_PL_70_VAL, + }, { + .reg = IP_SEL_MIX_PAD_REG, + .mask = PMX_UART5_PORT_SEL_MASK, + .val = PMX_UART5_PORT_69_VAL, + }, +}; + +static struct spear_muxreg uart5_ext_90_91_muxreg[] = { + { + .reg = IP_SEL_PAD_90_99_REG, + .mask = PMX_PL_90_91_MASK, + .val = PMX_UART5_PL_90_91_VAL, + }, { + .reg = IP_SEL_MIX_PAD_REG, + .mask = PMX_UART5_PORT_SEL_MASK, + .val = PMX_UART5_PORT_90_VAL, + }, +}; + +static struct spear_modemux uart5_modemux[][1] = { + { + /* Select signals on pins 4_5 */ + { + .modes = EXTENDED_MODE, + .muxregs = uart5_ext_4_5_muxreg, + .nmuxregs = ARRAY_SIZE(uart5_ext_4_5_muxreg), + }, + }, { + /* Select signals on pins 37_38 */ + { + .modes = EXTENDED_MODE, + .muxregs = uart5_ext_37_38_muxreg, + .nmuxregs = ARRAY_SIZE(uart5_ext_37_38_muxreg), + }, + }, { + /* Select signals on pins 69_70 */ + { + .modes = EXTENDED_MODE, + .muxregs = uart5_ext_69_70_muxreg, + .nmuxregs = ARRAY_SIZE(uart5_ext_69_70_muxreg), + }, + }, { + /* Select signals on pins 90_91 */ + { + .modes = EXTENDED_MODE, + .muxregs = uart5_ext_90_91_muxreg, + .nmuxregs = ARRAY_SIZE(uart5_ext_90_91_muxreg), + }, + }, +}; + +static struct spear_pingroup uart5_pingroup[] = { + { + .name = "uart5_4_5_grp", + .pins = uart5_pins[0], + .npins = ARRAY_SIZE(uart5_pins[0]), + .modemuxs = uart5_modemux[0], + .nmodemuxs = ARRAY_SIZE(uart5_modemux[0]), + }, { + .name = "uart5_37_38_grp", + .pins = uart5_pins[1], + .npins = ARRAY_SIZE(uart5_pins[1]), + .modemuxs = uart5_modemux[1], + .nmodemuxs = ARRAY_SIZE(uart5_modemux[1]), + }, { + .name = "uart5_69_70_grp", + .pins = uart5_pins[2], + .npins = ARRAY_SIZE(uart5_pins[2]), + .modemuxs = uart5_modemux[2], + .nmodemuxs = ARRAY_SIZE(uart5_modemux[2]), + }, { + .name = "uart5_90_91_grp", + .pins = uart5_pins[3], + .npins = ARRAY_SIZE(uart5_pins[3]), + .modemuxs = uart5_modemux[3], + .nmodemuxs = ARRAY_SIZE(uart5_modemux[3]), + }, +}; + +static const char *const uart5_grps[] = { "uart5_4_5_grp", "uart5_37_38_grp", + "uart5_69_70_grp", "uart5_90_91_grp" }; +static struct spear_function uart5_function = { + .name = "uart5", + .groups = uart5_grps, + .ngroups = ARRAY_SIZE(uart5_grps), +}; + +/* Pad multiplexing for uart6 device */ +static const unsigned uart6_pins[][2] = { { 2, 3 }, { 88, 89 } }; +static struct spear_muxreg uart6_ext_2_3_muxreg[] = { + { + .reg = PMX_CONFIG_REG, + .mask = PMX_UART0_MASK, + .val = 0, + }, { + .reg = IP_SEL_PAD_0_9_REG, + .mask = PMX_PL_2_3_MASK, + .val = PMX_UART6_PL_2_3_VAL, + }, { + .reg = IP_SEL_MIX_PAD_REG, + .mask = PMX_UART6_PORT_SEL_MASK, + .val = PMX_UART6_PORT_2_VAL, + }, +}; + +static struct spear_muxreg uart6_ext_88_89_muxreg[] = { + { + .reg = IP_SEL_PAD_80_89_REG, + .mask = PMX_PL_88_89_MASK, + .val = PMX_UART6_PL_88_89_VAL, + }, { + .reg = IP_SEL_MIX_PAD_REG, + .mask = PMX_UART6_PORT_SEL_MASK, + .val = PMX_UART6_PORT_88_VAL, + }, +}; + +static struct spear_modemux uart6_modemux[][1] = { + { + /* Select signals on pins 2_3 */ + { + .modes = EXTENDED_MODE, + .muxregs = uart6_ext_2_3_muxreg, + .nmuxregs = ARRAY_SIZE(uart6_ext_2_3_muxreg), + }, + }, { + /* Select signals on pins 88_89 */ + { + .modes = EXTENDED_MODE, + .muxregs = uart6_ext_88_89_muxreg, + .nmuxregs = ARRAY_SIZE(uart6_ext_88_89_muxreg), + }, + }, +}; + +static struct spear_pingroup uart6_pingroup[] = { + { + .name = "uart6_2_3_grp", + .pins = uart6_pins[0], + .npins = ARRAY_SIZE(uart6_pins[0]), + .modemuxs = uart6_modemux[0], + .nmodemuxs = ARRAY_SIZE(uart6_modemux[0]), + }, { + .name = "uart6_88_89_grp", + .pins = uart6_pins[1], + .npins = ARRAY_SIZE(uart6_pins[1]), + .modemuxs = uart6_modemux[1], + .nmodemuxs = ARRAY_SIZE(uart6_modemux[1]), + }, +}; + +static const char *const uart6_grps[] = { "uart6_2_3_grp", "uart6_88_89_grp" }; +static struct spear_function uart6_function = { + .name = "uart6", + .groups = uart6_grps, + .ngroups = ARRAY_SIZE(uart6_grps), +}; + +/* UART - RS485 pmx */ +static const unsigned rs485_pins[] = { 77, 78, 79 }; +static struct spear_muxreg rs485_muxreg[] = { + { + .reg = IP_SEL_PAD_70_79_REG, + .mask = PMX_PL_77_78_79_MASK, + .val = PMX_RS485_PL_77_78_79_VAL, + }, +}; + +static struct spear_modemux rs485_modemux[] = { + { + .modes = EXTENDED_MODE, + .muxregs = rs485_muxreg, + .nmuxregs = ARRAY_SIZE(rs485_muxreg), + }, +}; + +static struct spear_pingroup rs485_pingroup = { + .name = "rs485_grp", + .pins = rs485_pins, + .npins = ARRAY_SIZE(rs485_pins), + .modemuxs = rs485_modemux, + .nmodemuxs = ARRAY_SIZE(rs485_modemux), +}; + +static const char *const rs485_grps[] = { "rs485_grp" }; +static struct spear_function rs485_function = { + .name = "rs485", + .groups = rs485_grps, + .ngroups = ARRAY_SIZE(rs485_grps), +}; + +/* Pad multiplexing for Touchscreen device */ +static const unsigned touchscreen_pins[] = { 5, 36 }; +static struct spear_muxreg touchscreen_muxreg[] = { + { + .reg = PMX_CONFIG_REG, + .mask = PMX_I2C_MASK | PMX_SSP_CS_MASK, + .val = 0, + }, +}; + +static struct spear_muxreg touchscreen_ext_muxreg[] = { + { + .reg = IP_SEL_PAD_0_9_REG, + .mask = PMX_PL_5_MASK, + .val = PMX_TOUCH_Y_PL_5_VAL, + }, { + .reg = IP_SEL_PAD_30_39_REG, + .mask = PMX_PL_36_MASK, + .val = PMX_TOUCH_X_PL_36_VAL, + }, +}; + +static struct spear_modemux touchscreen_modemux[] = { + { + .modes = AUTO_NET_SMII_MODE | EXTENDED_MODE, + .muxregs = touchscreen_muxreg, + .nmuxregs = ARRAY_SIZE(touchscreen_muxreg), + }, { + .modes = EXTENDED_MODE, + .muxregs = touchscreen_ext_muxreg, + .nmuxregs = ARRAY_SIZE(touchscreen_ext_muxreg), + }, +}; + +static struct spear_pingroup touchscreen_pingroup = { + .name = "touchscreen_grp", + .pins = touchscreen_pins, + .npins = ARRAY_SIZE(touchscreen_pins), + .modemuxs = touchscreen_modemux, + .nmodemuxs = ARRAY_SIZE(touchscreen_modemux), +}; + +static const char *const touchscreen_grps[] = { "touchscreen_grp" }; +static struct spear_function touchscreen_function = { + .name = "touchscreen", + .groups = touchscreen_grps, + .ngroups = ARRAY_SIZE(touchscreen_grps), +}; + +/* Pad multiplexing for CAN device */ +static const unsigned can0_pins[] = { 32, 33 }; +static struct spear_muxreg can0_muxreg[] = { + { + .reg = PMX_CONFIG_REG, + .mask = PMX_GPIO_PIN4_MASK | PMX_GPIO_PIN5_MASK, + .val = 0, + }, +}; + +static struct spear_muxreg can0_ext_muxreg[] = { + { + .reg = IP_SEL_PAD_30_39_REG, + .mask = PMX_PL_32_33_MASK, + .val = PMX_CAN0_PL_32_33_VAL, + }, +}; + +static struct spear_modemux can0_modemux[] = { + { + .modes = AUTO_NET_SMII_MODE | AUTO_NET_MII_MODE | AUTO_EXP_MODE + | EXTENDED_MODE, + .muxregs = can0_muxreg, + .nmuxregs = ARRAY_SIZE(can0_muxreg), + }, { + .modes = EXTENDED_MODE, + .muxregs = can0_ext_muxreg, + .nmuxregs = ARRAY_SIZE(can0_ext_muxreg), + }, +}; + +static struct spear_pingroup can0_pingroup = { + .name = "can0_grp", + .pins = can0_pins, + .npins = ARRAY_SIZE(can0_pins), + .modemuxs = can0_modemux, + .nmodemuxs = ARRAY_SIZE(can0_modemux), +}; + +static const char *const can0_grps[] = { "can0_grp" }; +static struct spear_function can0_function = { + .name = "can0", + .groups = can0_grps, + .ngroups = ARRAY_SIZE(can0_grps), +}; + +static const unsigned can1_pins[] = { 30, 31 }; +static struct spear_muxreg can1_muxreg[] = { + { + .reg = PMX_CONFIG_REG, + .mask = PMX_GPIO_PIN2_MASK | PMX_GPIO_PIN3_MASK, + .val = 0, + }, +}; + +static struct spear_muxreg can1_ext_muxreg[] = { + { + .reg = IP_SEL_PAD_30_39_REG, + .mask = PMX_PL_30_31_MASK, + .val = PMX_CAN1_PL_30_31_VAL, + }, +}; + +static struct spear_modemux can1_modemux[] = { + { + .modes = AUTO_NET_SMII_MODE | AUTO_NET_MII_MODE | AUTO_EXP_MODE + | EXTENDED_MODE, + .muxregs = can1_muxreg, + .nmuxregs = ARRAY_SIZE(can1_muxreg), + }, { + .modes = EXTENDED_MODE, + .muxregs = can1_ext_muxreg, + .nmuxregs = ARRAY_SIZE(can1_ext_muxreg), + }, +}; + +static struct spear_pingroup can1_pingroup = { + .name = "can1_grp", + .pins = can1_pins, + .npins = ARRAY_SIZE(can1_pins), + .modemuxs = can1_modemux, + .nmodemuxs = ARRAY_SIZE(can1_modemux), +}; + +static const char *const can1_grps[] = { "can1_grp" }; +static struct spear_function can1_function = { + .name = "can1", + .groups = can1_grps, + .ngroups = ARRAY_SIZE(can1_grps), +}; + +/* Pad multiplexing for PWM0_1 device */ +static const unsigned pwm0_1_pins[][2] = { { 37, 38 }, { 14, 15 }, { 8, 9 }, + { 30, 31 }, { 42, 43 }, { 59, 60 }, { 88, 89 } }; + +static struct spear_muxreg pwm0_1_pin_8_9_muxreg[] = { + { + .reg = PMX_CONFIG_REG, + .mask = PMX_SSP_MASK, + .val = 0, + }, { + .reg = IP_SEL_PAD_0_9_REG, + .mask = PMX_PL_8_9_MASK, + .val = PMX_PWM_0_1_PL_8_9_VAL, + }, +}; + +static struct spear_muxreg pwm0_1_autoexpsmallpri_muxreg[] = { + { + .reg = PMX_CONFIG_REG, + .mask = PMX_MII_MASK, + .val = 0, + }, +}; + +static struct spear_muxreg pwm0_1_pin_14_15_muxreg[] = { + { + .reg = IP_SEL_PAD_10_19_REG, + .mask = PMX_PL_14_MASK | PMX_PL_15_MASK, + .val = PMX_PWM1_PL_14_VAL | PMX_PWM0_PL_15_VAL, + }, +}; + +static struct spear_muxreg pwm0_1_pin_30_31_muxreg[] = { + { + .reg = PMX_CONFIG_REG, + .mask = PMX_GPIO_PIN2_MASK | PMX_GPIO_PIN3_MASK, + .val = 0, + }, { + .reg = IP_SEL_PAD_30_39_REG, + .mask = PMX_PL_30_MASK | PMX_PL_31_MASK, + .val = PMX_PWM1_EXT_PL_30_VAL | PMX_PWM0_EXT_PL_31_VAL, + }, +}; + +static struct spear_muxreg pwm0_1_net_muxreg[] = { + { + .reg = PMX_CONFIG_REG, + .mask = PMX_UART0_MODEM_MASK, + .val = 0, + }, +}; + +static struct spear_muxreg pwm0_1_pin_37_38_muxreg[] = { + { + .reg = IP_SEL_PAD_30_39_REG, + .mask = PMX_PL_37_38_MASK, + .val = PMX_PWM0_1_PL_37_38_VAL, + }, +}; + +static struct spear_muxreg pwm0_1_pin_42_43_muxreg[] = { + { + .reg = PMX_CONFIG_REG, + .mask = PMX_UART0_MODEM_MASK | PMX_TIMER_0_1_MASK , + .val = 0, + }, { + .reg = IP_SEL_PAD_40_49_REG, + .mask = PMX_PL_42_MASK | PMX_PL_43_MASK, + .val = PMX_PWM1_PL_42_VAL | + PMX_PWM0_PL_43_VAL, + }, +}; + +static struct spear_muxreg pwm0_1_pin_59_60_muxreg[] = { + { + .reg = IP_SEL_PAD_50_59_REG, + .mask = PMX_PL_59_MASK, + .val = PMX_PWM1_PL_59_VAL, + }, { + .reg = IP_SEL_PAD_60_69_REG, + .mask = PMX_PL_60_MASK, + .val = PMX_PWM0_PL_60_VAL, + }, +}; + +static struct spear_muxreg pwm0_1_pin_88_89_muxreg[] = { + { + .reg = IP_SEL_PAD_80_89_REG, + .mask = PMX_PL_88_89_MASK, + .val = PMX_PWM0_1_PL_88_89_VAL, + }, +}; + +static struct spear_modemux pwm0_1_pin_8_9_modemux[] = { + { + .modes = EXTENDED_MODE, + .muxregs = pwm0_1_pin_8_9_muxreg, + .nmuxregs = ARRAY_SIZE(pwm0_1_pin_8_9_muxreg), + }, +}; + +static struct spear_modemux pwm0_1_pin_14_15_modemux[] = { + { + .modes = AUTO_EXP_MODE | SMALL_PRINTERS_MODE | EXTENDED_MODE, + .muxregs = pwm0_1_autoexpsmallpri_muxreg, + .nmuxregs = ARRAY_SIZE(pwm0_1_autoexpsmallpri_muxreg), + }, { + .modes = EXTENDED_MODE, + .muxregs = pwm0_1_pin_14_15_muxreg, + .nmuxregs = ARRAY_SIZE(pwm0_1_pin_14_15_muxreg), + }, +}; + +static struct spear_modemux pwm0_1_pin_30_31_modemux[] = { + { + .modes = EXTENDED_MODE, + .muxregs = pwm0_1_pin_30_31_muxreg, + .nmuxregs = ARRAY_SIZE(pwm0_1_pin_30_31_muxreg), + }, +}; + +static struct spear_modemux pwm0_1_pin_37_38_modemux[] = { + { + .modes = AUTO_NET_SMII_MODE | AUTO_NET_MII_MODE | EXTENDED_MODE, + .muxregs = pwm0_1_net_muxreg, + .nmuxregs = ARRAY_SIZE(pwm0_1_net_muxreg), + }, { + .modes = EXTENDED_MODE, + .muxregs = pwm0_1_pin_37_38_muxreg, + .nmuxregs = ARRAY_SIZE(pwm0_1_pin_37_38_muxreg), + }, +}; + +static struct spear_modemux pwm0_1_pin_42_43_modemux[] = { + { + .modes = EXTENDED_MODE, + .muxregs = pwm0_1_pin_42_43_muxreg, + .nmuxregs = ARRAY_SIZE(pwm0_1_pin_42_43_muxreg), + }, +}; + +static struct spear_modemux pwm0_1_pin_59_60_modemux[] = { + { + .modes = EXTENDED_MODE, + .muxregs = pwm0_1_pin_59_60_muxreg, + .nmuxregs = ARRAY_SIZE(pwm0_1_pin_59_60_muxreg), + }, +}; + +static struct spear_modemux pwm0_1_pin_88_89_modemux[] = { + { + .modes = EXTENDED_MODE, + .muxregs = pwm0_1_pin_88_89_muxreg, + .nmuxregs = ARRAY_SIZE(pwm0_1_pin_88_89_muxreg), + }, +}; + +static struct spear_pingroup pwm0_1_pingroup[] = { + { + .name = "pwm0_1_pin_8_9_grp", + .pins = pwm0_1_pins[0], + .npins = ARRAY_SIZE(pwm0_1_pins[0]), + .modemuxs = pwm0_1_pin_8_9_modemux, + .nmodemuxs = ARRAY_SIZE(pwm0_1_pin_8_9_modemux), + }, { + .name = "pwm0_1_pin_14_15_grp", + .pins = pwm0_1_pins[1], + .npins = ARRAY_SIZE(pwm0_1_pins[1]), + .modemuxs = pwm0_1_pin_14_15_modemux, + .nmodemuxs = ARRAY_SIZE(pwm0_1_pin_14_15_modemux), + }, { + .name = "pwm0_1_pin_30_31_grp", + .pins = pwm0_1_pins[2], + .npins = ARRAY_SIZE(pwm0_1_pins[2]), + .modemuxs = pwm0_1_pin_30_31_modemux, + .nmodemuxs = ARRAY_SIZE(pwm0_1_pin_30_31_modemux), + }, { + .name = "pwm0_1_pin_37_38_grp", + .pins = pwm0_1_pins[3], + .npins = ARRAY_SIZE(pwm0_1_pins[3]), + .modemuxs = pwm0_1_pin_37_38_modemux, + .nmodemuxs = ARRAY_SIZE(pwm0_1_pin_37_38_modemux), + }, { + .name = "pwm0_1_pin_42_43_grp", + .pins = pwm0_1_pins[4], + .npins = ARRAY_SIZE(pwm0_1_pins[4]), + .modemuxs = pwm0_1_pin_42_43_modemux, + .nmodemuxs = ARRAY_SIZE(pwm0_1_pin_42_43_modemux), + }, { + .name = "pwm0_1_pin_59_60_grp", + .pins = pwm0_1_pins[5], + .npins = ARRAY_SIZE(pwm0_1_pins[5]), + .modemuxs = pwm0_1_pin_59_60_modemux, + .nmodemuxs = ARRAY_SIZE(pwm0_1_pin_59_60_modemux), + }, { + .name = "pwm0_1_pin_88_89_grp", + .pins = pwm0_1_pins[6], + .npins = ARRAY_SIZE(pwm0_1_pins[6]), + .modemuxs = pwm0_1_pin_88_89_modemux, + .nmodemuxs = ARRAY_SIZE(pwm0_1_pin_88_89_modemux), + }, +}; + +static const char *const pwm0_1_grps[] = { "pwm0_1_pin_8_9_grp", + "pwm0_1_pin_14_15_grp", "pwm0_1_pin_30_31_grp", "pwm0_1_pin_37_38_grp", + "pwm0_1_pin_42_43_grp", "pwm0_1_pin_59_60_grp", "pwm0_1_pin_88_89_grp" +}; + +static struct spear_function pwm0_1_function = { + .name = "pwm0_1", + .groups = pwm0_1_grps, + .ngroups = ARRAY_SIZE(pwm0_1_grps), +}; + +/* Pad multiplexing for PWM2 device */ +static const unsigned pwm2_pins[][1] = { { 7 }, { 13 }, { 29 }, { 34 }, { 41 }, + { 58 }, { 87 } }; +static struct spear_muxreg pwm2_net_muxreg[] = { + { + .reg = PMX_CONFIG_REG, + .mask = PMX_SSP_CS_MASK, + .val = 0, + }, +}; + +static struct spear_muxreg pwm2_pin_7_muxreg[] = { + { + .reg = IP_SEL_PAD_0_9_REG, + .mask = PMX_PL_7_MASK, + .val = PMX_PWM_2_PL_7_VAL, + }, +}; + +static struct spear_muxreg pwm2_autoexpsmallpri_muxreg[] = { + { + .reg = PMX_CONFIG_REG, + .mask = PMX_MII_MASK, + .val = 0, + }, +}; + +static struct spear_muxreg pwm2_pin_13_muxreg[] = { + { + .reg = IP_SEL_PAD_10_19_REG, + .mask = PMX_PL_13_MASK, + .val = PMX_PWM2_PL_13_VAL, + }, +}; + +static struct spear_muxreg pwm2_pin_29_muxreg[] = { + { + .reg = PMX_CONFIG_REG, + .mask = PMX_GPIO_PIN1_MASK, + .val = 0, + }, { + .reg = IP_SEL_PAD_20_29_REG, + .mask = PMX_PL_29_MASK, + .val = PMX_PWM_2_PL_29_VAL, + }, +}; + +static struct spear_muxreg pwm2_pin_34_muxreg[] = { + { + .reg = PMX_CONFIG_REG, + .mask = PMX_SSP_CS_MASK, + .val = 0, + }, { + .reg = IP_SEL_PAD_30_39_REG, + .mask = PMX_PL_34_MASK, + .val = PMX_PWM2_PL_34_VAL, + }, +}; + +static struct spear_muxreg pwm2_pin_41_muxreg[] = { + { + .reg = PMX_CONFIG_REG, + .mask = PMX_UART0_MODEM_MASK, + .val = 0, + }, { + .reg = IP_SEL_PAD_40_49_REG, + .mask = PMX_PL_41_MASK, + .val = PMX_PWM2_PL_41_VAL, + }, +}; + +static struct spear_muxreg pwm2_pin_58_muxreg[] = { + { + .reg = IP_SEL_PAD_50_59_REG, + .mask = PMX_PL_58_MASK, + .val = PMX_PWM2_PL_58_VAL, + }, +}; + +static struct spear_muxreg pwm2_pin_87_muxreg[] = { + { + .reg = IP_SEL_PAD_80_89_REG, + .mask = PMX_PL_87_MASK, + .val = PMX_PWM2_PL_87_VAL, + }, +}; + +static struct spear_modemux pwm2_pin_7_modemux[] = { + { + .modes = AUTO_NET_SMII_MODE | AUTO_NET_MII_MODE | EXTENDED_MODE, + .muxregs = pwm2_net_muxreg, + .nmuxregs = ARRAY_SIZE(pwm2_net_muxreg), + }, { + .modes = EXTENDED_MODE, + .muxregs = pwm2_pin_7_muxreg, + .nmuxregs = ARRAY_SIZE(pwm2_pin_7_muxreg), + }, +}; +static struct spear_modemux pwm2_pin_13_modemux[] = { + { + .modes = AUTO_EXP_MODE | SMALL_PRINTERS_MODE | EXTENDED_MODE, + .muxregs = pwm2_autoexpsmallpri_muxreg, + .nmuxregs = ARRAY_SIZE(pwm2_autoexpsmallpri_muxreg), + }, { + .modes = EXTENDED_MODE, + .muxregs = pwm2_pin_13_muxreg, + .nmuxregs = ARRAY_SIZE(pwm2_pin_13_muxreg), + }, +}; +static struct spear_modemux pwm2_pin_29_modemux[] = { + { + .modes = EXTENDED_MODE, + .muxregs = pwm2_pin_29_muxreg, + .nmuxregs = ARRAY_SIZE(pwm2_pin_29_muxreg), + }, +}; +static struct spear_modemux pwm2_pin_34_modemux[] = { + { + .modes = EXTENDED_MODE, + .muxregs = pwm2_pin_34_muxreg, + .nmuxregs = ARRAY_SIZE(pwm2_pin_34_muxreg), + }, +}; + +static struct spear_modemux pwm2_pin_41_modemux[] = { + { + .modes = EXTENDED_MODE, + .muxregs = pwm2_pin_41_muxreg, + .nmuxregs = ARRAY_SIZE(pwm2_pin_41_muxreg), + }, +}; + +static struct spear_modemux pwm2_pin_58_modemux[] = { + { + .modes = EXTENDED_MODE, + .muxregs = pwm2_pin_58_muxreg, + .nmuxregs = ARRAY_SIZE(pwm2_pin_58_muxreg), + }, +}; + +static struct spear_modemux pwm2_pin_87_modemux[] = { + { + .modes = EXTENDED_MODE, + .muxregs = pwm2_pin_87_muxreg, + .nmuxregs = ARRAY_SIZE(pwm2_pin_87_muxreg), + }, +}; + +static struct spear_pingroup pwm2_pingroup[] = { + { + .name = "pwm2_pin_7_grp", + .pins = pwm2_pins[0], + .npins = ARRAY_SIZE(pwm2_pins[0]), + .modemuxs = pwm2_pin_7_modemux, + .nmodemuxs = ARRAY_SIZE(pwm2_pin_7_modemux), + }, { + .name = "pwm2_pin_13_grp", + .pins = pwm2_pins[1], + .npins = ARRAY_SIZE(pwm2_pins[1]), + .modemuxs = pwm2_pin_13_modemux, + .nmodemuxs = ARRAY_SIZE(pwm2_pin_13_modemux), + }, { + .name = "pwm2_pin_29_grp", + .pins = pwm2_pins[2], + .npins = ARRAY_SIZE(pwm2_pins[2]), + .modemuxs = pwm2_pin_29_modemux, + .nmodemuxs = ARRAY_SIZE(pwm2_pin_29_modemux), + }, { + .name = "pwm2_pin_34_grp", + .pins = pwm2_pins[3], + .npins = ARRAY_SIZE(pwm2_pins[3]), + .modemuxs = pwm2_pin_34_modemux, + .nmodemuxs = ARRAY_SIZE(pwm2_pin_34_modemux), + }, { + .name = "pwm2_pin_41_grp", + .pins = pwm2_pins[4], + .npins = ARRAY_SIZE(pwm2_pins[4]), + .modemuxs = pwm2_pin_41_modemux, + .nmodemuxs = ARRAY_SIZE(pwm2_pin_41_modemux), + }, { + .name = "pwm2_pin_58_grp", + .pins = pwm2_pins[5], + .npins = ARRAY_SIZE(pwm2_pins[5]), + .modemuxs = pwm2_pin_58_modemux, + .nmodemuxs = ARRAY_SIZE(pwm2_pin_58_modemux), + }, { + .name = "pwm2_pin_87_grp", + .pins = pwm2_pins[6], + .npins = ARRAY_SIZE(pwm2_pins[6]), + .modemuxs = pwm2_pin_87_modemux, + .nmodemuxs = ARRAY_SIZE(pwm2_pin_87_modemux), + }, +}; + +static const char *const pwm2_grps[] = { "pwm2_pin_7_grp", "pwm2_pin_13_grp", + "pwm2_pin_29_grp", "pwm2_pin_34_grp", "pwm2_pin_41_grp", + "pwm2_pin_58_grp", "pwm2_pin_87_grp" }; +static struct spear_function pwm2_function = { + .name = "pwm2", + .groups = pwm2_grps, + .ngroups = ARRAY_SIZE(pwm2_grps), +}; + +/* Pad multiplexing for PWM3 device */ +static const unsigned pwm3_pins[][1] = { { 6 }, { 12 }, { 28 }, { 40 }, { 57 }, + { 86 } }; +static struct spear_muxreg pwm3_pin_6_muxreg[] = { + { + .reg = PMX_CONFIG_REG, + .mask = PMX_SSP_MASK, + .val = 0, + }, { + .reg = IP_SEL_PAD_0_9_REG, + .mask = PMX_PL_6_MASK, + .val = PMX_PWM_3_PL_6_VAL, + }, +}; + +static struct spear_muxreg pwm3_muxreg[] = { + { + .reg = PMX_CONFIG_REG, + .mask = PMX_MII_MASK, + .val = 0, + }, +}; + +static struct spear_muxreg pwm3_pin_12_muxreg[] = { + { + .reg = IP_SEL_PAD_10_19_REG, + .mask = PMX_PL_12_MASK, + .val = PMX_PWM3_PL_12_VAL, + }, +}; + +static struct spear_muxreg pwm3_pin_28_muxreg[] = { + { + .reg = PMX_CONFIG_REG, + .mask = PMX_GPIO_PIN0_MASK, + .val = 0, + }, { + .reg = IP_SEL_PAD_20_29_REG, + .mask = PMX_PL_28_MASK, + .val = PMX_PWM_3_PL_28_VAL, + }, +}; + +static struct spear_muxreg pwm3_pin_40_muxreg[] = { + { + .reg = PMX_CONFIG_REG, + .mask = PMX_UART0_MODEM_MASK, + .val = 0, + }, { + .reg = IP_SEL_PAD_40_49_REG, + .mask = PMX_PL_40_MASK, + .val = PMX_PWM3_PL_40_VAL, + }, +}; + +static struct spear_muxreg pwm3_pin_57_muxreg[] = { + { + .reg = IP_SEL_PAD_50_59_REG, + .mask = PMX_PL_57_MASK, + .val = PMX_PWM3_PL_57_VAL, + }, +}; + +static struct spear_muxreg pwm3_pin_86_muxreg[] = { + { + .reg = IP_SEL_PAD_80_89_REG, + .mask = PMX_PL_86_MASK, + .val = PMX_PWM3_PL_86_VAL, + }, +}; + +static struct spear_modemux pwm3_pin_6_modemux[] = { + { + .modes = EXTENDED_MODE, + .muxregs = pwm3_pin_6_muxreg, + .nmuxregs = ARRAY_SIZE(pwm3_pin_6_muxreg), + }, +}; + +static struct spear_modemux pwm3_pin_12_modemux[] = { + { + .modes = AUTO_EXP_MODE | SMALL_PRINTERS_MODE | + AUTO_NET_SMII_MODE | EXTENDED_MODE, + .muxregs = pwm3_muxreg, + .nmuxregs = ARRAY_SIZE(pwm3_muxreg), + }, { + .modes = EXTENDED_MODE, + .muxregs = pwm3_pin_12_muxreg, + .nmuxregs = ARRAY_SIZE(pwm3_pin_12_muxreg), + }, +}; + +static struct spear_modemux pwm3_pin_28_modemux[] = { + { + .modes = EXTENDED_MODE, + .muxregs = pwm3_pin_28_muxreg, + .nmuxregs = ARRAY_SIZE(pwm3_pin_28_muxreg), + }, +}; + +static struct spear_modemux pwm3_pin_40_modemux[] = { + { + .modes = EXTENDED_MODE, + .muxregs = pwm3_pin_40_muxreg, + .nmuxregs = ARRAY_SIZE(pwm3_pin_40_muxreg), + }, +}; + +static struct spear_modemux pwm3_pin_57_modemux[] = { + { + .modes = EXTENDED_MODE, + .muxregs = pwm3_pin_57_muxreg, + .nmuxregs = ARRAY_SIZE(pwm3_pin_57_muxreg), + }, +}; + +static struct spear_modemux pwm3_pin_86_modemux[] = { + { + .modes = EXTENDED_MODE, + .muxregs = pwm3_pin_86_muxreg, + .nmuxregs = ARRAY_SIZE(pwm3_pin_86_muxreg), + }, +}; + +static struct spear_pingroup pwm3_pingroup[] = { + { + .name = "pwm3_pin_6_grp", + .pins = pwm3_pins[0], + .npins = ARRAY_SIZE(pwm3_pins[0]), + .modemuxs = pwm3_pin_6_modemux, + .nmodemuxs = ARRAY_SIZE(pwm3_pin_6_modemux), + }, { + .name = "pwm3_pin_12_grp", + .pins = pwm3_pins[1], + .npins = ARRAY_SIZE(pwm3_pins[1]), + .modemuxs = pwm3_pin_12_modemux, + .nmodemuxs = ARRAY_SIZE(pwm3_pin_12_modemux), + }, { + .name = "pwm3_pin_28_grp", + .pins = pwm3_pins[2], + .npins = ARRAY_SIZE(pwm3_pins[2]), + .modemuxs = pwm3_pin_28_modemux, + .nmodemuxs = ARRAY_SIZE(pwm3_pin_28_modemux), + }, { + .name = "pwm3_pin_40_grp", + .pins = pwm3_pins[3], + .npins = ARRAY_SIZE(pwm3_pins[3]), + .modemuxs = pwm3_pin_40_modemux, + .nmodemuxs = ARRAY_SIZE(pwm3_pin_40_modemux), + }, { + .name = "pwm3_pin_57_grp", + .pins = pwm3_pins[4], + .npins = ARRAY_SIZE(pwm3_pins[4]), + .modemuxs = pwm3_pin_57_modemux, + .nmodemuxs = ARRAY_SIZE(pwm3_pin_57_modemux), + }, { + .name = "pwm3_pin_86_grp", + .pins = pwm3_pins[5], + .npins = ARRAY_SIZE(pwm3_pins[5]), + .modemuxs = pwm3_pin_86_modemux, + .nmodemuxs = ARRAY_SIZE(pwm3_pin_86_modemux), + }, +}; + +static const char *const pwm3_grps[] = { "pwm3_pin_6_grp", "pwm3_pin_12_grp", + "pwm3_pin_28_grp", "pwm3_pin_40_grp", "pwm3_pin_57_grp", + "pwm3_pin_86_grp" }; +static struct spear_function pwm3_function = { + .name = "pwm3", + .groups = pwm3_grps, + .ngroups = ARRAY_SIZE(pwm3_grps), +}; + +/* Pad multiplexing for SSP1 device */ +static const unsigned ssp1_pins[][2] = { { 17, 20 }, { 36, 39 }, { 48, 51 }, + { 65, 68 }, { 94, 97 } }; +static struct spear_muxreg ssp1_muxreg[] = { + { + .reg = PMX_CONFIG_REG, + .mask = PMX_MII_MASK, + .val = 0, + }, +}; + +static struct spear_muxreg ssp1_ext_17_20_muxreg[] = { + { + .reg = IP_SEL_PAD_10_19_REG, + .mask = PMX_PL_17_18_MASK | PMX_PL_19_MASK, + .val = PMX_SSP1_PL_17_18_19_20_VAL, + }, { + .reg = IP_SEL_PAD_20_29_REG, + .mask = PMX_PL_20_MASK, + .val = PMX_SSP1_PL_17_18_19_20_VAL, + }, { + .reg = IP_SEL_MIX_PAD_REG, + .mask = PMX_SSP1_PORT_SEL_MASK, + .val = PMX_SSP1_PORT_17_TO_20_VAL, + }, +}; + +static struct spear_muxreg ssp1_ext_36_39_muxreg[] = { + { + .reg = PMX_CONFIG_REG, + .mask = PMX_UART0_MODEM_MASK | PMX_SSP_CS_MASK, + .val = 0, + }, { + .reg = IP_SEL_PAD_30_39_REG, + .mask = PMX_PL_36_MASK | PMX_PL_37_38_MASK | PMX_PL_39_MASK, + .val = PMX_SSP1_PL_36_VAL | PMX_SSP1_PL_37_38_VAL | + PMX_SSP1_PL_39_VAL, + }, { + .reg = IP_SEL_MIX_PAD_REG, + .mask = PMX_SSP1_PORT_SEL_MASK, + .val = PMX_SSP1_PORT_36_TO_39_VAL, + }, +}; + +static struct spear_muxreg ssp1_ext_48_51_muxreg[] = { + { + .reg = PMX_CONFIG_REG, + .mask = PMX_TIMER_0_1_MASK | PMX_TIMER_2_3_MASK, + .val = 0, + }, { + .reg = IP_SEL_PAD_40_49_REG, + .mask = PMX_PL_48_49_MASK, + .val = PMX_SSP1_PL_48_49_VAL, + }, { + .reg = IP_SEL_PAD_50_59_REG, + .mask = PMX_PL_50_51_MASK, + .val = PMX_SSP1_PL_50_51_VAL, + }, { + .reg = IP_SEL_MIX_PAD_REG, + .mask = PMX_SSP1_PORT_SEL_MASK, + .val = PMX_SSP1_PORT_48_TO_51_VAL, + }, +}; + +static struct spear_muxreg ssp1_ext_65_68_muxreg[] = { + { + .reg = IP_SEL_PAD_60_69_REG, + .mask = PMX_PL_65_TO_68_MASK, + .val = PMX_SSP1_PL_65_TO_68_VAL, + }, { + .reg = IP_SEL_MIX_PAD_REG, + .mask = PMX_SSP1_PORT_SEL_MASK, + .val = PMX_SSP1_PORT_65_TO_68_VAL, + }, +}; + +static struct spear_muxreg ssp1_ext_94_97_muxreg[] = { + { + .reg = IP_SEL_PAD_90_99_REG, + .mask = PMX_PL_94_95_MASK | PMX_PL_96_97_MASK, + .val = PMX_SSP1_PL_94_95_VAL | PMX_SSP1_PL_96_97_VAL, + }, { + .reg = IP_SEL_MIX_PAD_REG, + .mask = PMX_SSP1_PORT_SEL_MASK, + .val = PMX_SSP1_PORT_94_TO_97_VAL, + }, +}; + +static struct spear_modemux ssp1_17_20_modemux[] = { + { + .modes = SMALL_PRINTERS_MODE | AUTO_NET_SMII_MODE | + EXTENDED_MODE, + .muxregs = ssp1_muxreg, + .nmuxregs = ARRAY_SIZE(ssp1_muxreg), + }, { + .modes = EXTENDED_MODE, + .muxregs = ssp1_ext_17_20_muxreg, + .nmuxregs = ARRAY_SIZE(ssp1_ext_17_20_muxreg), + }, +}; + +static struct spear_modemux ssp1_36_39_modemux[] = { + { + .modes = EXTENDED_MODE, + .muxregs = ssp1_ext_36_39_muxreg, + .nmuxregs = ARRAY_SIZE(ssp1_ext_36_39_muxreg), + }, +}; + +static struct spear_modemux ssp1_48_51_modemux[] = { + { + .modes = EXTENDED_MODE, + .muxregs = ssp1_ext_48_51_muxreg, + .nmuxregs = ARRAY_SIZE(ssp1_ext_48_51_muxreg), + }, +}; +static struct spear_modemux ssp1_65_68_modemux[] = { + { + .modes = EXTENDED_MODE, + .muxregs = ssp1_ext_65_68_muxreg, + .nmuxregs = ARRAY_SIZE(ssp1_ext_65_68_muxreg), + }, +}; + +static struct spear_modemux ssp1_94_97_modemux[] = { + { + .modes = EXTENDED_MODE, + .muxregs = ssp1_ext_94_97_muxreg, + .nmuxregs = ARRAY_SIZE(ssp1_ext_94_97_muxreg), + }, +}; + +static struct spear_pingroup ssp1_pingroup[] = { + { + .name = "ssp1_17_20_grp", + .pins = ssp1_pins[0], + .npins = ARRAY_SIZE(ssp1_pins[0]), + .modemuxs = ssp1_17_20_modemux, + .nmodemuxs = ARRAY_SIZE(ssp1_17_20_modemux), + }, { + .name = "ssp1_36_39_grp", + .pins = ssp1_pins[1], + .npins = ARRAY_SIZE(ssp1_pins[1]), + .modemuxs = ssp1_36_39_modemux, + .nmodemuxs = ARRAY_SIZE(ssp1_36_39_modemux), + }, { + .name = "ssp1_48_51_grp", + .pins = ssp1_pins[2], + .npins = ARRAY_SIZE(ssp1_pins[2]), + .modemuxs = ssp1_48_51_modemux, + .nmodemuxs = ARRAY_SIZE(ssp1_48_51_modemux), + }, { + .name = "ssp1_65_68_grp", + .pins = ssp1_pins[3], + .npins = ARRAY_SIZE(ssp1_pins[3]), + .modemuxs = ssp1_65_68_modemux, + .nmodemuxs = ARRAY_SIZE(ssp1_65_68_modemux), + }, { + .name = "ssp1_94_97_grp", + .pins = ssp1_pins[4], + .npins = ARRAY_SIZE(ssp1_pins[4]), + .modemuxs = ssp1_94_97_modemux, + .nmodemuxs = ARRAY_SIZE(ssp1_94_97_modemux), + }, +}; + +static const char *const ssp1_grps[] = { "ssp1_17_20_grp", "ssp1_36_39_grp", + "ssp1_48_51_grp", "ssp1_65_68_grp", "ssp1_94_97_grp" +}; +static struct spear_function ssp1_function = { + .name = "ssp1", + .groups = ssp1_grps, + .ngroups = ARRAY_SIZE(ssp1_grps), +}; + +/* Pad multiplexing for SSP2 device */ +static const unsigned ssp2_pins[][2] = { { 13, 16 }, { 32, 35 }, { 44, 47 }, + { 61, 64 }, { 90, 93 } }; +static struct spear_muxreg ssp2_muxreg[] = { + { + .reg = PMX_CONFIG_REG, + .mask = PMX_MII_MASK, + .val = 0, + }, +}; + +static struct spear_muxreg ssp2_ext_13_16_muxreg[] = { + { + .reg = IP_SEL_PAD_10_19_REG, + .mask = PMX_PL_13_14_MASK | PMX_PL_15_16_MASK, + .val = PMX_SSP2_PL_13_14_15_16_VAL, + }, { + .reg = IP_SEL_MIX_PAD_REG, + .mask = PMX_SSP2_PORT_SEL_MASK, + .val = PMX_SSP2_PORT_13_TO_16_VAL, + }, +}; + +static struct spear_muxreg ssp2_ext_32_35_muxreg[] = { + { + .reg = PMX_CONFIG_REG, + .mask = PMX_SSP_CS_MASK | PMX_GPIO_PIN4_MASK | + PMX_GPIO_PIN5_MASK, + .val = 0, + }, { + .reg = IP_SEL_PAD_30_39_REG, + .mask = PMX_PL_32_33_MASK | PMX_PL_34_MASK | PMX_PL_35_MASK, + .val = PMX_SSP2_PL_32_33_VAL | PMX_SSP2_PL_34_VAL | + PMX_SSP2_PL_35_VAL, + }, { + .reg = IP_SEL_MIX_PAD_REG, + .mask = PMX_SSP2_PORT_SEL_MASK, + .val = PMX_SSP2_PORT_32_TO_35_VAL, + }, +}; + +static struct spear_muxreg ssp2_ext_44_47_muxreg[] = { + { + .reg = PMX_CONFIG_REG, + .mask = PMX_TIMER_0_1_MASK | PMX_TIMER_2_3_MASK, + .val = 0, + }, { + .reg = IP_SEL_PAD_40_49_REG, + .mask = PMX_PL_44_45_MASK | PMX_PL_46_47_MASK, + .val = PMX_SSP2_PL_44_45_VAL | PMX_SSP2_PL_46_47_VAL, + }, { + .reg = IP_SEL_MIX_PAD_REG, + .mask = PMX_SSP2_PORT_SEL_MASK, + .val = PMX_SSP2_PORT_44_TO_47_VAL, + }, +}; + +static struct spear_muxreg ssp2_ext_61_64_muxreg[] = { + { + .reg = IP_SEL_PAD_60_69_REG, + .mask = PMX_PL_61_TO_64_MASK, + .val = PMX_SSP2_PL_61_TO_64_VAL, + }, { + .reg = IP_SEL_MIX_PAD_REG, + .mask = PMX_SSP2_PORT_SEL_MASK, + .val = PMX_SSP2_PORT_61_TO_64_VAL, + }, +}; + +static struct spear_muxreg ssp2_ext_90_93_muxreg[] = { + { + .reg = IP_SEL_PAD_90_99_REG, + .mask = PMX_PL_90_91_MASK | PMX_PL_92_93_MASK, + .val = PMX_SSP2_PL_90_91_VAL | PMX_SSP2_PL_92_93_VAL, + }, { + .reg = IP_SEL_MIX_PAD_REG, + .mask = PMX_SSP2_PORT_SEL_MASK, + .val = PMX_SSP2_PORT_90_TO_93_VAL, + }, +}; + +static struct spear_modemux ssp2_13_16_modemux[] = { + { + .modes = AUTO_NET_SMII_MODE | EXTENDED_MODE, + .muxregs = ssp2_muxreg, + .nmuxregs = ARRAY_SIZE(ssp2_muxreg), + }, { + .modes = EXTENDED_MODE, + .muxregs = ssp2_ext_13_16_muxreg, + .nmuxregs = ARRAY_SIZE(ssp2_ext_13_16_muxreg), + }, +}; + +static struct spear_modemux ssp2_32_35_modemux[] = { + { + .modes = EXTENDED_MODE, + .muxregs = ssp2_ext_32_35_muxreg, + .nmuxregs = ARRAY_SIZE(ssp2_ext_32_35_muxreg), + }, +}; + +static struct spear_modemux ssp2_44_47_modemux[] = { + { + .modes = EXTENDED_MODE, + .muxregs = ssp2_ext_44_47_muxreg, + .nmuxregs = ARRAY_SIZE(ssp2_ext_44_47_muxreg), + }, +}; + +static struct spear_modemux ssp2_61_64_modemux[] = { + { + .modes = EXTENDED_MODE, + .muxregs = ssp2_ext_61_64_muxreg, + .nmuxregs = ARRAY_SIZE(ssp2_ext_61_64_muxreg), + }, +}; + +static struct spear_modemux ssp2_90_93_modemux[] = { + { + .modes = EXTENDED_MODE, + .muxregs = ssp2_ext_90_93_muxreg, + .nmuxregs = ARRAY_SIZE(ssp2_ext_90_93_muxreg), + }, +}; + +static struct spear_pingroup ssp2_pingroup[] = { + { + .name = "ssp2_13_16_grp", + .pins = ssp2_pins[0], + .npins = ARRAY_SIZE(ssp2_pins[0]), + .modemuxs = ssp2_13_16_modemux, + .nmodemuxs = ARRAY_SIZE(ssp2_13_16_modemux), + }, { + .name = "ssp2_32_35_grp", + .pins = ssp2_pins[1], + .npins = ARRAY_SIZE(ssp2_pins[1]), + .modemuxs = ssp2_32_35_modemux, + .nmodemuxs = ARRAY_SIZE(ssp2_32_35_modemux), + }, { + .name = "ssp2_44_47_grp", + .pins = ssp2_pins[2], + .npins = ARRAY_SIZE(ssp2_pins[2]), + .modemuxs = ssp2_44_47_modemux, + .nmodemuxs = ARRAY_SIZE(ssp2_44_47_modemux), + }, { + .name = "ssp2_61_64_grp", + .pins = ssp2_pins[3], + .npins = ARRAY_SIZE(ssp2_pins[3]), + .modemuxs = ssp2_61_64_modemux, + .nmodemuxs = ARRAY_SIZE(ssp2_61_64_modemux), + }, { + .name = "ssp2_90_93_grp", + .pins = ssp2_pins[4], + .npins = ARRAY_SIZE(ssp2_pins[4]), + .modemuxs = ssp2_90_93_modemux, + .nmodemuxs = ARRAY_SIZE(ssp2_90_93_modemux), + }, +}; + +static const char *const ssp2_grps[] = { "ssp2_13_16_grp", "ssp2_32_35_grp", + "ssp2_44_47_grp", "ssp2_61_64_grp", "ssp2_90_93_grp" }; +static struct spear_function ssp2_function = { + .name = "ssp2", + .groups = ssp2_grps, + .ngroups = ARRAY_SIZE(ssp2_grps), +}; + +/* Pad multiplexing for cadence mii2 as mii device */ +static const unsigned mii2_pins[] = { 80, 81, 82, 83, 84, 85, 86, 87, 88, 89, + 90, 91, 92, 93, 94, 95, 96, 97 }; +static struct spear_muxreg mii2_muxreg[] = { + { + .reg = IP_SEL_PAD_80_89_REG, + .mask = PMX_PL_80_TO_85_MASK | PMX_PL_86_87_MASK | + PMX_PL_88_89_MASK, + .val = PMX_MII2_PL_80_TO_85_VAL | PMX_MII2_PL_86_87_VAL | + PMX_MII2_PL_88_89_VAL, + }, { + .reg = IP_SEL_PAD_90_99_REG, + .mask = PMX_PL_90_91_MASK | PMX_PL_92_93_MASK | + PMX_PL_94_95_MASK | PMX_PL_96_97_MASK, + .val = PMX_MII2_PL_90_91_VAL | PMX_MII2_PL_92_93_VAL | + PMX_MII2_PL_94_95_VAL | PMX_MII2_PL_96_97_VAL, + }, { + .reg = EXT_CTRL_REG, + .mask = (MAC_MODE_MASK << MAC2_MODE_SHIFT) | + (MAC_MODE_MASK << MAC1_MODE_SHIFT) | + MII_MDIO_MASK, + .val = (MAC_MODE_MII << MAC2_MODE_SHIFT) | + (MAC_MODE_MII << MAC1_MODE_SHIFT) | + MII_MDIO_81_VAL, + }, +}; + +static struct spear_modemux mii2_modemux[] = { + { + .modes = EXTENDED_MODE, + .muxregs = mii2_muxreg, + .nmuxregs = ARRAY_SIZE(mii2_muxreg), + }, +}; + +static struct spear_pingroup mii2_pingroup = { + .name = "mii2_grp", + .pins = mii2_pins, + .npins = ARRAY_SIZE(mii2_pins), + .modemuxs = mii2_modemux, + .nmodemuxs = ARRAY_SIZE(mii2_modemux), +}; + +static const char *const mii2_grps[] = { "mii2_grp" }; +static struct spear_function mii2_function = { + .name = "mii2", + .groups = mii2_grps, + .ngroups = ARRAY_SIZE(mii2_grps), +}; + +/* Pad multiplexing for cadence mii 1_2 as smii or rmii device */ +static const unsigned smii0_1_pins[] = { 10, 11, 13, 14, 15, 16, 17, 18, 19, 20, + 21, 22, 23, 24, 25, 26, 27 }; +static const unsigned rmii0_1_pins[] = { 10, 11, 21, 22, 23, 24, 25, 26, 27 }; +static struct spear_muxreg mii0_1_muxreg[] = { + { + .reg = PMX_CONFIG_REG, + .mask = PMX_MII_MASK, + .val = 0, + }, +}; + +static struct spear_muxreg smii0_1_ext_muxreg[] = { + { + .reg = IP_SEL_PAD_10_19_REG, + .mask = PMX_PL_10_11_MASK, + .val = PMX_SMII_PL_10_11_VAL, + }, { + .reg = IP_SEL_PAD_20_29_REG, + .mask = PMX_PL_21_TO_27_MASK, + .val = PMX_SMII_PL_21_TO_27_VAL, + }, { + .reg = EXT_CTRL_REG, + .mask = (MAC_MODE_MASK << MAC2_MODE_SHIFT) | + (MAC_MODE_MASK << MAC1_MODE_SHIFT) | + MII_MDIO_MASK, + .val = (MAC_MODE_SMII << MAC2_MODE_SHIFT) + | (MAC_MODE_SMII << MAC1_MODE_SHIFT) + | MII_MDIO_10_11_VAL, + }, +}; + +static struct spear_muxreg rmii0_1_ext_muxreg[] = { + { + .reg = IP_SEL_PAD_10_19_REG, + .mask = PMX_PL_10_11_MASK | PMX_PL_13_14_MASK | + PMX_PL_15_16_MASK | PMX_PL_17_18_MASK | PMX_PL_19_MASK, + .val = PMX_RMII_PL_10_11_VAL | PMX_RMII_PL_13_14_VAL | + PMX_RMII_PL_15_16_VAL | PMX_RMII_PL_17_18_VAL | + PMX_RMII_PL_19_VAL, + }, { + .reg = IP_SEL_PAD_20_29_REG, + .mask = PMX_PL_20_MASK | PMX_PL_21_TO_27_MASK, + .val = PMX_RMII_PL_20_VAL | PMX_RMII_PL_21_TO_27_VAL, + }, { + .reg = EXT_CTRL_REG, + .mask = (MAC_MODE_MASK << MAC2_MODE_SHIFT) | + (MAC_MODE_MASK << MAC1_MODE_SHIFT) | + MII_MDIO_MASK, + .val = (MAC_MODE_RMII << MAC2_MODE_SHIFT) + | (MAC_MODE_RMII << MAC1_MODE_SHIFT) + | MII_MDIO_10_11_VAL, + }, +}; + +static struct spear_modemux mii0_1_modemux[][2] = { + { + /* configure as smii */ + { + .modes = AUTO_NET_SMII_MODE | AUTO_EXP_MODE | + SMALL_PRINTERS_MODE | EXTENDED_MODE, + .muxregs = mii0_1_muxreg, + .nmuxregs = ARRAY_SIZE(mii0_1_muxreg), + }, { + .modes = EXTENDED_MODE, + .muxregs = smii0_1_ext_muxreg, + .nmuxregs = ARRAY_SIZE(smii0_1_ext_muxreg), + }, + }, { + /* configure as rmii */ + { + .modes = AUTO_NET_SMII_MODE | AUTO_EXP_MODE | + SMALL_PRINTERS_MODE | EXTENDED_MODE, + .muxregs = mii0_1_muxreg, + .nmuxregs = ARRAY_SIZE(mii0_1_muxreg), + }, { + .modes = EXTENDED_MODE, + .muxregs = rmii0_1_ext_muxreg, + .nmuxregs = ARRAY_SIZE(rmii0_1_ext_muxreg), + }, + }, +}; + +static struct spear_pingroup mii0_1_pingroup[] = { + { + .name = "smii0_1_grp", + .pins = smii0_1_pins, + .npins = ARRAY_SIZE(smii0_1_pins), + .modemuxs = mii0_1_modemux[0], + .nmodemuxs = ARRAY_SIZE(mii0_1_modemux[0]), + }, { + .name = "rmii0_1_grp", + .pins = rmii0_1_pins, + .npins = ARRAY_SIZE(rmii0_1_pins), + .modemuxs = mii0_1_modemux[1], + .nmodemuxs = ARRAY_SIZE(mii0_1_modemux[1]), + }, +}; + +static const char *const mii0_1_grps[] = { "smii0_1_grp", "rmii0_1_grp" }; +static struct spear_function mii0_1_function = { + .name = "mii0_1", + .groups = mii0_1_grps, + .ngroups = ARRAY_SIZE(mii0_1_grps), +}; + +/* Pad multiplexing for i2c1 device */ +static const unsigned i2c1_pins[][2] = { { 8, 9 }, { 98, 99 } }; +static struct spear_muxreg i2c1_ext_8_9_muxreg[] = { + { + .reg = PMX_CONFIG_REG, + .mask = PMX_SSP_CS_MASK, + .val = 0, + }, { + .reg = IP_SEL_PAD_0_9_REG, + .mask = PMX_PL_8_9_MASK, + .val = PMX_I2C1_PL_8_9_VAL, + }, { + .reg = IP_SEL_MIX_PAD_REG, + .mask = PMX_I2C1_PORT_SEL_MASK, + .val = PMX_I2C1_PORT_8_9_VAL, + }, +}; + +static struct spear_muxreg i2c1_ext_98_99_muxreg[] = { + { + .reg = IP_SEL_PAD_90_99_REG, + .mask = PMX_PL_98_MASK | PMX_PL_99_MASK, + .val = PMX_I2C1_PL_98_VAL | PMX_I2C1_PL_99_VAL, + }, { + .reg = IP_SEL_MIX_PAD_REG, + .mask = PMX_I2C1_PORT_SEL_MASK, + .val = PMX_I2C1_PORT_98_99_VAL, + }, +}; + +static struct spear_modemux i2c1_modemux[][1] = { + { + /* Select signals on pins 8-9 */ + { + .modes = EXTENDED_MODE, + .muxregs = i2c1_ext_8_9_muxreg, + .nmuxregs = ARRAY_SIZE(i2c1_ext_8_9_muxreg), + }, + }, { + /* Select signals on pins 98-99 */ + { + .modes = EXTENDED_MODE, + .muxregs = i2c1_ext_98_99_muxreg, + .nmuxregs = ARRAY_SIZE(i2c1_ext_98_99_muxreg), + }, + }, +}; + +static struct spear_pingroup i2c1_pingroup[] = { + { + .name = "i2c1_8_9_grp", + .pins = i2c1_pins[0], + .npins = ARRAY_SIZE(i2c1_pins[0]), + .modemuxs = i2c1_modemux[0], + .nmodemuxs = ARRAY_SIZE(i2c1_modemux[0]), + }, { + .name = "i2c1_98_99_grp", + .pins = i2c1_pins[1], + .npins = ARRAY_SIZE(i2c1_pins[1]), + .modemuxs = i2c1_modemux[1], + .nmodemuxs = ARRAY_SIZE(i2c1_modemux[1]), + }, +}; + +static const char *const i2c1_grps[] = { "i2c1_8_9_grp", "i2c1_98_99_grp" }; +static struct spear_function i2c1_function = { + .name = "i2c1", + .groups = i2c1_grps, + .ngroups = ARRAY_SIZE(i2c1_grps), +}; + +/* Pad multiplexing for i2c2 device */ +static const unsigned i2c2_pins[][2] = { { 0, 1 }, { 2, 3 }, { 19, 20 }, + { 75, 76 }, { 96, 97 } }; +static struct spear_muxreg i2c2_ext_0_1_muxreg[] = { + { + .reg = PMX_CONFIG_REG, + .mask = PMX_FIRDA_MASK, + .val = 0, + }, { + .reg = IP_SEL_PAD_0_9_REG, + .mask = PMX_PL_0_1_MASK, + .val = PMX_I2C2_PL_0_1_VAL, + }, { + .reg = IP_SEL_MIX_PAD_REG, + .mask = PMX_I2C2_PORT_SEL_MASK, + .val = PMX_I2C2_PORT_0_1_VAL, + }, +}; + +static struct spear_muxreg i2c2_ext_2_3_muxreg[] = { + { + .reg = PMX_CONFIG_REG, + .mask = PMX_UART0_MASK, + .val = 0, + }, { + .reg = IP_SEL_PAD_0_9_REG, + .mask = PMX_PL_2_3_MASK, + .val = PMX_I2C2_PL_2_3_VAL, + }, { + .reg = IP_SEL_MIX_PAD_REG, + .mask = PMX_I2C2_PORT_SEL_MASK, + .val = PMX_I2C2_PORT_2_3_VAL, + }, +}; + +static struct spear_muxreg i2c2_ext_19_20_muxreg[] = { + { + .reg = PMX_CONFIG_REG, + .mask = PMX_MII_MASK, + .val = 0, + }, { + .reg = IP_SEL_PAD_10_19_REG, + .mask = PMX_PL_19_MASK, + .val = PMX_I2C2_PL_19_VAL, + }, { + .reg = IP_SEL_PAD_20_29_REG, + .mask = PMX_PL_20_MASK, + .val = PMX_I2C2_PL_20_VAL, + }, { + .reg = IP_SEL_MIX_PAD_REG, + .mask = PMX_I2C2_PORT_SEL_MASK, + .val = PMX_I2C2_PORT_19_20_VAL, + }, +}; + +static struct spear_muxreg i2c2_ext_75_76_muxreg[] = { + { + .reg = IP_SEL_PAD_70_79_REG, + .mask = PMX_PL_75_76_MASK, + .val = PMX_I2C2_PL_75_76_VAL, + }, { + .reg = IP_SEL_MIX_PAD_REG, + .mask = PMX_I2C2_PORT_SEL_MASK, + .val = PMX_I2C2_PORT_75_76_VAL, + }, +}; + +static struct spear_muxreg i2c2_ext_96_97_muxreg[] = { + { + .reg = IP_SEL_PAD_90_99_REG, + .mask = PMX_PL_96_97_MASK, + .val = PMX_I2C2_PL_96_97_VAL, + }, { + .reg = IP_SEL_MIX_PAD_REG, + .mask = PMX_I2C2_PORT_SEL_MASK, + .val = PMX_I2C2_PORT_96_97_VAL, + }, +}; + +static struct spear_modemux i2c2_modemux[][1] = { + { + /* Select signals on pins 0_1 */ + { + .modes = EXTENDED_MODE, + .muxregs = i2c2_ext_0_1_muxreg, + .nmuxregs = ARRAY_SIZE(i2c2_ext_0_1_muxreg), + }, + }, { + /* Select signals on pins 2_3 */ + { + .modes = EXTENDED_MODE, + .muxregs = i2c2_ext_2_3_muxreg, + .nmuxregs = ARRAY_SIZE(i2c2_ext_2_3_muxreg), + }, + }, { + /* Select signals on pins 19_20 */ + { + .modes = EXTENDED_MODE, + .muxregs = i2c2_ext_19_20_muxreg, + .nmuxregs = ARRAY_SIZE(i2c2_ext_19_20_muxreg), + }, + }, { + /* Select signals on pins 75_76 */ + { + .modes = EXTENDED_MODE, + .muxregs = i2c2_ext_75_76_muxreg, + .nmuxregs = ARRAY_SIZE(i2c2_ext_75_76_muxreg), + }, + }, { + /* Select signals on pins 96_97 */ + { + .modes = EXTENDED_MODE, + .muxregs = i2c2_ext_96_97_muxreg, + .nmuxregs = ARRAY_SIZE(i2c2_ext_96_97_muxreg), + }, + }, +}; + +static struct spear_pingroup i2c2_pingroup[] = { + { + .name = "i2c2_0_1_grp", + .pins = i2c2_pins[0], + .npins = ARRAY_SIZE(i2c2_pins[0]), + .modemuxs = i2c2_modemux[0], + .nmodemuxs = ARRAY_SIZE(i2c2_modemux[0]), + }, { + .name = "i2c2_2_3_grp", + .pins = i2c2_pins[1], + .npins = ARRAY_SIZE(i2c2_pins[1]), + .modemuxs = i2c2_modemux[1], + .nmodemuxs = ARRAY_SIZE(i2c2_modemux[1]), + }, { + .name = "i2c2_19_20_grp", + .pins = i2c2_pins[2], + .npins = ARRAY_SIZE(i2c2_pins[2]), + .modemuxs = i2c2_modemux[2], + .nmodemuxs = ARRAY_SIZE(i2c2_modemux[2]), + }, { + .name = "i2c2_75_76_grp", + .pins = i2c2_pins[3], + .npins = ARRAY_SIZE(i2c2_pins[3]), + .modemuxs = i2c2_modemux[3], + .nmodemuxs = ARRAY_SIZE(i2c2_modemux[3]), + }, { + .name = "i2c2_96_97_grp", + .pins = i2c2_pins[4], + .npins = ARRAY_SIZE(i2c2_pins[4]), + .modemuxs = i2c2_modemux[4], + .nmodemuxs = ARRAY_SIZE(i2c2_modemux[4]), + }, +}; + +static const char *const i2c2_grps[] = { "i2c2_0_1_grp", "i2c2_2_3_grp", + "i2c2_19_20_grp", "i2c2_75_76_grp", "i2c2_96_97_grp" }; +static struct spear_function i2c2_function = { + .name = "i2c2", + .groups = i2c2_grps, + .ngroups = ARRAY_SIZE(i2c2_grps), +}; + +/* pingroups */ +static struct spear_pingroup *spear320_pingroups[] = { + SPEAR3XX_COMMON_PINGROUPS, + &clcd_pingroup, + &emi_pingroup, + &fsmc_8bit_pingroup, + &fsmc_16bit_pingroup, + &spp_pingroup, + &sdhci_led_pingroup, + &sdhci_pingroup[0], + &sdhci_pingroup[1], + &i2s_pingroup, + &uart1_pingroup, + &uart1_modem_pingroup[0], + &uart1_modem_pingroup[1], + &uart1_modem_pingroup[2], + &uart1_modem_pingroup[3], + &uart2_pingroup, + &uart3_pingroup[0], + &uart3_pingroup[1], + &uart3_pingroup[2], + &uart3_pingroup[3], + &uart3_pingroup[4], + &uart3_pingroup[5], + &uart3_pingroup[6], + &uart4_pingroup[0], + &uart4_pingroup[1], + &uart4_pingroup[2], + &uart4_pingroup[3], + &uart4_pingroup[4], + &uart4_pingroup[5], + &uart5_pingroup[0], + &uart5_pingroup[1], + &uart5_pingroup[2], + &uart5_pingroup[3], + &uart6_pingroup[0], + &uart6_pingroup[1], + &rs485_pingroup, + &touchscreen_pingroup, + &can0_pingroup, + &can1_pingroup, + &pwm0_1_pingroup[0], + &pwm0_1_pingroup[1], + &pwm0_1_pingroup[2], + &pwm0_1_pingroup[3], + &pwm0_1_pingroup[4], + &pwm0_1_pingroup[5], + &pwm0_1_pingroup[6], + &pwm2_pingroup[0], + &pwm2_pingroup[1], + &pwm2_pingroup[2], + &pwm2_pingroup[3], + &pwm2_pingroup[4], + &pwm2_pingroup[5], + &pwm2_pingroup[6], + &pwm3_pingroup[0], + &pwm3_pingroup[1], + &pwm3_pingroup[2], + &pwm3_pingroup[3], + &pwm3_pingroup[4], + &pwm3_pingroup[5], + &ssp1_pingroup[0], + &ssp1_pingroup[1], + &ssp1_pingroup[2], + &ssp1_pingroup[3], + &ssp1_pingroup[4], + &ssp2_pingroup[0], + &ssp2_pingroup[1], + &ssp2_pingroup[2], + &ssp2_pingroup[3], + &ssp2_pingroup[4], + &mii2_pingroup, + &mii0_1_pingroup[0], + &mii0_1_pingroup[1], + &i2c1_pingroup[0], + &i2c1_pingroup[1], + &i2c2_pingroup[0], + &i2c2_pingroup[1], + &i2c2_pingroup[2], + &i2c2_pingroup[3], + &i2c2_pingroup[4], +}; + +/* functions */ +static struct spear_function *spear320_functions[] = { + SPEAR3XX_COMMON_FUNCTIONS, + &clcd_function, + &emi_function, + &fsmc_function, + &spp_function, + &sdhci_function, + &i2s_function, + &uart1_function, + &uart1_modem_function, + &uart2_function, + &uart3_function, + &uart4_function, + &uart5_function, + &uart6_function, + &rs485_function, + &touchscreen_function, + &can0_function, + &can1_function, + &pwm0_1_function, + &pwm2_function, + &pwm3_function, + &ssp1_function, + &ssp2_function, + &mii2_function, + &mii0_1_function, + &i2c1_function, + &i2c2_function, +}; + +static struct of_device_id spear320_pinctrl_of_match[] __devinitdata = { + { + .compatible = "st,spear320-pinmux", + }, + {}, +}; + +static int __devinit spear320_pinctrl_probe(struct platform_device *pdev) +{ + int ret; + + spear3xx_machdata.groups = spear320_pingroups; + spear3xx_machdata.ngroups = ARRAY_SIZE(spear320_pingroups); + spear3xx_machdata.functions = spear320_functions; + spear3xx_machdata.nfunctions = ARRAY_SIZE(spear320_functions); + + spear3xx_machdata.modes_supported = true; + spear3xx_machdata.pmx_modes = spear320_pmx_modes; + spear3xx_machdata.npmx_modes = ARRAY_SIZE(spear320_pmx_modes); + + pmx_init_addr(&spear3xx_machdata, PMX_CONFIG_REG); + + ret = spear_pinctrl_probe(pdev, &spear3xx_machdata); + if (ret) + return ret; + + return 0; +} + +static int __devexit spear320_pinctrl_remove(struct platform_device *pdev) +{ + return spear_pinctrl_remove(pdev); +} + +static struct platform_driver spear320_pinctrl_driver = { + .driver = { + .name = DRIVER_NAME, + .owner = THIS_MODULE, + .of_match_table = spear320_pinctrl_of_match, + }, + .probe = spear320_pinctrl_probe, + .remove = __devexit_p(spear320_pinctrl_remove), +}; + +static int __init spear320_pinctrl_init(void) +{ + return platform_driver_register(&spear320_pinctrl_driver); +} +arch_initcall(spear320_pinctrl_init); + +static void __exit spear320_pinctrl_exit(void) +{ + platform_driver_unregister(&spear320_pinctrl_driver); +} +module_exit(spear320_pinctrl_exit); + +MODULE_AUTHOR("Viresh Kumar "); +MODULE_DESCRIPTION("ST Microelectronics SPEAr320 pinctrl driver"); +MODULE_LICENSE("GPL v2"); +MODULE_DEVICE_TABLE(of, spear320_pinctrl_of_match); diff --git a/drivers/pinctrl/spear/pinctrl-spear3xx.c b/drivers/pinctrl/spear/pinctrl-spear3xx.c new file mode 100644 index 000000000000..832049a8b1c9 --- /dev/null +++ b/drivers/pinctrl/spear/pinctrl-spear3xx.c @@ -0,0 +1,588 @@ +/* + * Driver for the ST Microelectronics SPEAr3xx pinmux + * + * Copyright (C) 2012 ST Microelectronics + * Viresh Kumar + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include + +#include "pinctrl-spear3xx.h" + +/* pins */ +static const struct pinctrl_pin_desc spear3xx_pins[] = { + PINCTRL_PIN(0, "PLGPIO0"), + PINCTRL_PIN(1, "PLGPIO1"), + PINCTRL_PIN(2, "PLGPIO2"), + PINCTRL_PIN(3, "PLGPIO3"), + PINCTRL_PIN(4, "PLGPIO4"), + PINCTRL_PIN(5, "PLGPIO5"), + PINCTRL_PIN(6, "PLGPIO6"), + PINCTRL_PIN(7, "PLGPIO7"), + PINCTRL_PIN(8, "PLGPIO8"), + PINCTRL_PIN(9, "PLGPIO9"), + PINCTRL_PIN(10, "PLGPIO10"), + PINCTRL_PIN(11, "PLGPIO11"), + PINCTRL_PIN(12, "PLGPIO12"), + PINCTRL_PIN(13, "PLGPIO13"), + PINCTRL_PIN(14, "PLGPIO14"), + PINCTRL_PIN(15, "PLGPIO15"), + PINCTRL_PIN(16, "PLGPIO16"), + PINCTRL_PIN(17, "PLGPIO17"), + PINCTRL_PIN(18, "PLGPIO18"), + PINCTRL_PIN(19, "PLGPIO19"), + PINCTRL_PIN(20, "PLGPIO20"), + PINCTRL_PIN(21, "PLGPIO21"), + PINCTRL_PIN(22, "PLGPIO22"), + PINCTRL_PIN(23, "PLGPIO23"), + PINCTRL_PIN(24, "PLGPIO24"), + PINCTRL_PIN(25, "PLGPIO25"), + PINCTRL_PIN(26, "PLGPIO26"), + PINCTRL_PIN(27, "PLGPIO27"), + PINCTRL_PIN(28, "PLGPIO28"), + PINCTRL_PIN(29, "PLGPIO29"), + PINCTRL_PIN(30, "PLGPIO30"), + PINCTRL_PIN(31, "PLGPIO31"), + PINCTRL_PIN(32, "PLGPIO32"), + PINCTRL_PIN(33, "PLGPIO33"), + PINCTRL_PIN(34, "PLGPIO34"), + PINCTRL_PIN(35, "PLGPIO35"), + PINCTRL_PIN(36, "PLGPIO36"), + PINCTRL_PIN(37, "PLGPIO37"), + PINCTRL_PIN(38, "PLGPIO38"), + PINCTRL_PIN(39, "PLGPIO39"), + PINCTRL_PIN(40, "PLGPIO40"), + PINCTRL_PIN(41, "PLGPIO41"), + PINCTRL_PIN(42, "PLGPIO42"), + PINCTRL_PIN(43, "PLGPIO43"), + PINCTRL_PIN(44, "PLGPIO44"), + PINCTRL_PIN(45, "PLGPIO45"), + PINCTRL_PIN(46, "PLGPIO46"), + PINCTRL_PIN(47, "PLGPIO47"), + PINCTRL_PIN(48, "PLGPIO48"), + PINCTRL_PIN(49, "PLGPIO49"), + PINCTRL_PIN(50, "PLGPIO50"), + PINCTRL_PIN(51, "PLGPIO51"), + PINCTRL_PIN(52, "PLGPIO52"), + PINCTRL_PIN(53, "PLGPIO53"), + PINCTRL_PIN(54, "PLGPIO54"), + PINCTRL_PIN(55, "PLGPIO55"), + PINCTRL_PIN(56, "PLGPIO56"), + PINCTRL_PIN(57, "PLGPIO57"), + PINCTRL_PIN(58, "PLGPIO58"), + PINCTRL_PIN(59, "PLGPIO59"), + PINCTRL_PIN(60, "PLGPIO60"), + PINCTRL_PIN(61, "PLGPIO61"), + PINCTRL_PIN(62, "PLGPIO62"), + PINCTRL_PIN(63, "PLGPIO63"), + PINCTRL_PIN(64, "PLGPIO64"), + PINCTRL_PIN(65, "PLGPIO65"), + PINCTRL_PIN(66, "PLGPIO66"), + PINCTRL_PIN(67, "PLGPIO67"), + PINCTRL_PIN(68, "PLGPIO68"), + PINCTRL_PIN(69, "PLGPIO69"), + PINCTRL_PIN(70, "PLGPIO70"), + PINCTRL_PIN(71, "PLGPIO71"), + PINCTRL_PIN(72, "PLGPIO72"), + PINCTRL_PIN(73, "PLGPIO73"), + PINCTRL_PIN(74, "PLGPIO74"), + PINCTRL_PIN(75, "PLGPIO75"), + PINCTRL_PIN(76, "PLGPIO76"), + PINCTRL_PIN(77, "PLGPIO77"), + PINCTRL_PIN(78, "PLGPIO78"), + PINCTRL_PIN(79, "PLGPIO79"), + PINCTRL_PIN(80, "PLGPIO80"), + PINCTRL_PIN(81, "PLGPIO81"), + PINCTRL_PIN(82, "PLGPIO82"), + PINCTRL_PIN(83, "PLGPIO83"), + PINCTRL_PIN(84, "PLGPIO84"), + PINCTRL_PIN(85, "PLGPIO85"), + PINCTRL_PIN(86, "PLGPIO86"), + PINCTRL_PIN(87, "PLGPIO87"), + PINCTRL_PIN(88, "PLGPIO88"), + PINCTRL_PIN(89, "PLGPIO89"), + PINCTRL_PIN(90, "PLGPIO90"), + PINCTRL_PIN(91, "PLGPIO91"), + PINCTRL_PIN(92, "PLGPIO92"), + PINCTRL_PIN(93, "PLGPIO93"), + PINCTRL_PIN(94, "PLGPIO94"), + PINCTRL_PIN(95, "PLGPIO95"), + PINCTRL_PIN(96, "PLGPIO96"), + PINCTRL_PIN(97, "PLGPIO97"), + PINCTRL_PIN(98, "PLGPIO98"), + PINCTRL_PIN(99, "PLGPIO99"), + PINCTRL_PIN(100, "PLGPIO100"), + PINCTRL_PIN(101, "PLGPIO101"), +}; + +/* firda_pins */ +static const unsigned firda_pins[] = { 0, 1 }; +static struct spear_muxreg firda_muxreg[] = { + { + .reg = -1, + .mask = PMX_FIRDA_MASK, + .val = PMX_FIRDA_MASK, + }, +}; + +static struct spear_modemux firda_modemux[] = { + { + .modes = ~0, + .muxregs = firda_muxreg, + .nmuxregs = ARRAY_SIZE(firda_muxreg), + }, +}; + +struct spear_pingroup spear3xx_firda_pingroup = { + .name = "firda_grp", + .pins = firda_pins, + .npins = ARRAY_SIZE(firda_pins), + .modemuxs = firda_modemux, + .nmodemuxs = ARRAY_SIZE(firda_modemux), +}; + +static const char *const firda_grps[] = { "firda_grp" }; +struct spear_function spear3xx_firda_function = { + .name = "firda", + .groups = firda_grps, + .ngroups = ARRAY_SIZE(firda_grps), +}; + +/* i2c_pins */ +static const unsigned i2c_pins[] = { 4, 5 }; +static struct spear_muxreg i2c_muxreg[] = { + { + .reg = -1, + .mask = PMX_I2C_MASK, + .val = PMX_I2C_MASK, + }, +}; + +static struct spear_modemux i2c_modemux[] = { + { + .modes = ~0, + .muxregs = i2c_muxreg, + .nmuxregs = ARRAY_SIZE(i2c_muxreg), + }, +}; + +struct spear_pingroup spear3xx_i2c_pingroup = { + .name = "i2c0_grp", + .pins = i2c_pins, + .npins = ARRAY_SIZE(i2c_pins), + .modemuxs = i2c_modemux, + .nmodemuxs = ARRAY_SIZE(i2c_modemux), +}; + +static const char *const i2c_grps[] = { "i2c0_grp" }; +struct spear_function spear3xx_i2c_function = { + .name = "i2c0", + .groups = i2c_grps, + .ngroups = ARRAY_SIZE(i2c_grps), +}; + +/* ssp_cs_pins */ +static const unsigned ssp_cs_pins[] = { 34, 35, 36 }; +static struct spear_muxreg ssp_cs_muxreg[] = { + { + .reg = -1, + .mask = PMX_SSP_CS_MASK, + .val = PMX_SSP_CS_MASK, + }, +}; + +static struct spear_modemux ssp_cs_modemux[] = { + { + .modes = ~0, + .muxregs = ssp_cs_muxreg, + .nmuxregs = ARRAY_SIZE(ssp_cs_muxreg), + }, +}; + +struct spear_pingroup spear3xx_ssp_cs_pingroup = { + .name = "ssp_cs_grp", + .pins = ssp_cs_pins, + .npins = ARRAY_SIZE(ssp_cs_pins), + .modemuxs = ssp_cs_modemux, + .nmodemuxs = ARRAY_SIZE(ssp_cs_modemux), +}; + +static const char *const ssp_cs_grps[] = { "ssp_cs_grp" }; +struct spear_function spear3xx_ssp_cs_function = { + .name = "ssp_cs", + .groups = ssp_cs_grps, + .ngroups = ARRAY_SIZE(ssp_cs_grps), +}; + +/* ssp_pins */ +static const unsigned ssp_pins[] = { 6, 7, 8, 9 }; +static struct spear_muxreg ssp_muxreg[] = { + { + .reg = -1, + .mask = PMX_SSP_MASK, + .val = PMX_SSP_MASK, + }, +}; + +static struct spear_modemux ssp_modemux[] = { + { + .modes = ~0, + .muxregs = ssp_muxreg, + .nmuxregs = ARRAY_SIZE(ssp_muxreg), + }, +}; + +struct spear_pingroup spear3xx_ssp_pingroup = { + .name = "ssp0_grp", + .pins = ssp_pins, + .npins = ARRAY_SIZE(ssp_pins), + .modemuxs = ssp_modemux, + .nmodemuxs = ARRAY_SIZE(ssp_modemux), +}; + +static const char *const ssp_grps[] = { "ssp0_grp" }; +struct spear_function spear3xx_ssp_function = { + .name = "ssp0", + .groups = ssp_grps, + .ngroups = ARRAY_SIZE(ssp_grps), +}; + +/* mii_pins */ +static const unsigned mii_pins[] = { 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, + 21, 22, 23, 24, 25, 26, 27 }; +static struct spear_muxreg mii_muxreg[] = { + { + .reg = -1, + .mask = PMX_MII_MASK, + .val = PMX_MII_MASK, + }, +}; + +static struct spear_modemux mii_modemux[] = { + { + .modes = ~0, + .muxregs = mii_muxreg, + .nmuxregs = ARRAY_SIZE(mii_muxreg), + }, +}; + +struct spear_pingroup spear3xx_mii_pingroup = { + .name = "mii0_grp", + .pins = mii_pins, + .npins = ARRAY_SIZE(mii_pins), + .modemuxs = mii_modemux, + .nmodemuxs = ARRAY_SIZE(mii_modemux), +}; + +static const char *const mii_grps[] = { "mii0_grp" }; +struct spear_function spear3xx_mii_function = { + .name = "mii0", + .groups = mii_grps, + .ngroups = ARRAY_SIZE(mii_grps), +}; + +/* gpio0_pin0_pins */ +static const unsigned gpio0_pin0_pins[] = { 28 }; +static struct spear_muxreg gpio0_pin0_muxreg[] = { + { + .reg = -1, + .mask = PMX_GPIO_PIN0_MASK, + .val = PMX_GPIO_PIN0_MASK, + }, +}; + +static struct spear_modemux gpio0_pin0_modemux[] = { + { + .modes = ~0, + .muxregs = gpio0_pin0_muxreg, + .nmuxregs = ARRAY_SIZE(gpio0_pin0_muxreg), + }, +}; + +struct spear_pingroup spear3xx_gpio0_pin0_pingroup = { + .name = "gpio0_pin0_grp", + .pins = gpio0_pin0_pins, + .npins = ARRAY_SIZE(gpio0_pin0_pins), + .modemuxs = gpio0_pin0_modemux, + .nmodemuxs = ARRAY_SIZE(gpio0_pin0_modemux), +}; + +/* gpio0_pin1_pins */ +static const unsigned gpio0_pin1_pins[] = { 29 }; +static struct spear_muxreg gpio0_pin1_muxreg[] = { + { + .reg = -1, + .mask = PMX_GPIO_PIN1_MASK, + .val = PMX_GPIO_PIN1_MASK, + }, +}; + +static struct spear_modemux gpio0_pin1_modemux[] = { + { + .modes = ~0, + .muxregs = gpio0_pin1_muxreg, + .nmuxregs = ARRAY_SIZE(gpio0_pin1_muxreg), + }, +}; + +struct spear_pingroup spear3xx_gpio0_pin1_pingroup = { + .name = "gpio0_pin1_grp", + .pins = gpio0_pin1_pins, + .npins = ARRAY_SIZE(gpio0_pin1_pins), + .modemuxs = gpio0_pin1_modemux, + .nmodemuxs = ARRAY_SIZE(gpio0_pin1_modemux), +}; + +/* gpio0_pin2_pins */ +static const unsigned gpio0_pin2_pins[] = { 30 }; +static struct spear_muxreg gpio0_pin2_muxreg[] = { + { + .reg = -1, + .mask = PMX_GPIO_PIN2_MASK, + .val = PMX_GPIO_PIN2_MASK, + }, +}; + +static struct spear_modemux gpio0_pin2_modemux[] = { + { + .modes = ~0, + .muxregs = gpio0_pin2_muxreg, + .nmuxregs = ARRAY_SIZE(gpio0_pin2_muxreg), + }, +}; + +struct spear_pingroup spear3xx_gpio0_pin2_pingroup = { + .name = "gpio0_pin2_grp", + .pins = gpio0_pin2_pins, + .npins = ARRAY_SIZE(gpio0_pin2_pins), + .modemuxs = gpio0_pin2_modemux, + .nmodemuxs = ARRAY_SIZE(gpio0_pin2_modemux), +}; + +/* gpio0_pin3_pins */ +static const unsigned gpio0_pin3_pins[] = { 31 }; +static struct spear_muxreg gpio0_pin3_muxreg[] = { + { + .reg = -1, + .mask = PMX_GPIO_PIN3_MASK, + .val = PMX_GPIO_PIN3_MASK, + }, +}; + +static struct spear_modemux gpio0_pin3_modemux[] = { + { + .modes = ~0, + .muxregs = gpio0_pin3_muxreg, + .nmuxregs = ARRAY_SIZE(gpio0_pin3_muxreg), + }, +}; + +struct spear_pingroup spear3xx_gpio0_pin3_pingroup = { + .name = "gpio0_pin3_grp", + .pins = gpio0_pin3_pins, + .npins = ARRAY_SIZE(gpio0_pin3_pins), + .modemuxs = gpio0_pin3_modemux, + .nmodemuxs = ARRAY_SIZE(gpio0_pin3_modemux), +}; + +/* gpio0_pin4_pins */ +static const unsigned gpio0_pin4_pins[] = { 32 }; +static struct spear_muxreg gpio0_pin4_muxreg[] = { + { + .reg = -1, + .mask = PMX_GPIO_PIN4_MASK, + .val = PMX_GPIO_PIN4_MASK, + }, +}; + +static struct spear_modemux gpio0_pin4_modemux[] = { + { + .modes = ~0, + .muxregs = gpio0_pin4_muxreg, + .nmuxregs = ARRAY_SIZE(gpio0_pin4_muxreg), + }, +}; + +struct spear_pingroup spear3xx_gpio0_pin4_pingroup = { + .name = "gpio0_pin4_grp", + .pins = gpio0_pin4_pins, + .npins = ARRAY_SIZE(gpio0_pin4_pins), + .modemuxs = gpio0_pin4_modemux, + .nmodemuxs = ARRAY_SIZE(gpio0_pin4_modemux), +}; + +/* gpio0_pin5_pins */ +static const unsigned gpio0_pin5_pins[] = { 33 }; +static struct spear_muxreg gpio0_pin5_muxreg[] = { + { + .reg = -1, + .mask = PMX_GPIO_PIN5_MASK, + .val = PMX_GPIO_PIN5_MASK, + }, +}; + +static struct spear_modemux gpio0_pin5_modemux[] = { + { + .modes = ~0, + .muxregs = gpio0_pin5_muxreg, + .nmuxregs = ARRAY_SIZE(gpio0_pin5_muxreg), + }, +}; + +struct spear_pingroup spear3xx_gpio0_pin5_pingroup = { + .name = "gpio0_pin5_grp", + .pins = gpio0_pin5_pins, + .npins = ARRAY_SIZE(gpio0_pin5_pins), + .modemuxs = gpio0_pin5_modemux, + .nmodemuxs = ARRAY_SIZE(gpio0_pin5_modemux), +}; + +static const char *const gpio0_grps[] = { "gpio0_pin0_grp", "gpio0_pin1_grp", + "gpio0_pin2_grp", "gpio0_pin3_grp", "gpio0_pin4_grp", "gpio0_pin5_grp", +}; +struct spear_function spear3xx_gpio0_function = { + .name = "gpio0", + .groups = gpio0_grps, + .ngroups = ARRAY_SIZE(gpio0_grps), +}; + +/* uart0_ext_pins */ +static const unsigned uart0_ext_pins[] = { 37, 38, 39, 40, 41, 42 }; +static struct spear_muxreg uart0_ext_muxreg[] = { + { + .reg = -1, + .mask = PMX_UART0_MODEM_MASK, + .val = PMX_UART0_MODEM_MASK, + }, +}; + +static struct spear_modemux uart0_ext_modemux[] = { + { + .modes = ~0, + .muxregs = uart0_ext_muxreg, + .nmuxregs = ARRAY_SIZE(uart0_ext_muxreg), + }, +}; + +struct spear_pingroup spear3xx_uart0_ext_pingroup = { + .name = "uart0_ext_grp", + .pins = uart0_ext_pins, + .npins = ARRAY_SIZE(uart0_ext_pins), + .modemuxs = uart0_ext_modemux, + .nmodemuxs = ARRAY_SIZE(uart0_ext_modemux), +}; + +static const char *const uart0_ext_grps[] = { "uart0_ext_grp" }; +struct spear_function spear3xx_uart0_ext_function = { + .name = "uart0_ext", + .groups = uart0_ext_grps, + .ngroups = ARRAY_SIZE(uart0_ext_grps), +}; + +/* uart0_pins */ +static const unsigned uart0_pins[] = { 2, 3 }; +static struct spear_muxreg uart0_muxreg[] = { + { + .reg = -1, + .mask = PMX_UART0_MASK, + .val = PMX_UART0_MASK, + }, +}; + +static struct spear_modemux uart0_modemux[] = { + { + .modes = ~0, + .muxregs = uart0_muxreg, + .nmuxregs = ARRAY_SIZE(uart0_muxreg), + }, +}; + +struct spear_pingroup spear3xx_uart0_pingroup = { + .name = "uart0_grp", + .pins = uart0_pins, + .npins = ARRAY_SIZE(uart0_pins), + .modemuxs = uart0_modemux, + .nmodemuxs = ARRAY_SIZE(uart0_modemux), +}; + +static const char *const uart0_grps[] = { "uart0_grp" }; +struct spear_function spear3xx_uart0_function = { + .name = "uart0", + .groups = uart0_grps, + .ngroups = ARRAY_SIZE(uart0_grps), +}; + +/* timer_0_1_pins */ +static const unsigned timer_0_1_pins[] = { 43, 44, 47, 48 }; +static struct spear_muxreg timer_0_1_muxreg[] = { + { + .reg = -1, + .mask = PMX_TIMER_0_1_MASK, + .val = PMX_TIMER_0_1_MASK, + }, +}; + +static struct spear_modemux timer_0_1_modemux[] = { + { + .modes = ~0, + .muxregs = timer_0_1_muxreg, + .nmuxregs = ARRAY_SIZE(timer_0_1_muxreg), + }, +}; + +struct spear_pingroup spear3xx_timer_0_1_pingroup = { + .name = "timer_0_1_grp", + .pins = timer_0_1_pins, + .npins = ARRAY_SIZE(timer_0_1_pins), + .modemuxs = timer_0_1_modemux, + .nmodemuxs = ARRAY_SIZE(timer_0_1_modemux), +}; + +static const char *const timer_0_1_grps[] = { "timer_0_1_grp" }; +struct spear_function spear3xx_timer_0_1_function = { + .name = "timer_0_1", + .groups = timer_0_1_grps, + .ngroups = ARRAY_SIZE(timer_0_1_grps), +}; + +/* timer_2_3_pins */ +static const unsigned timer_2_3_pins[] = { 45, 46, 49, 50 }; +static struct spear_muxreg timer_2_3_muxreg[] = { + { + .reg = -1, + .mask = PMX_TIMER_2_3_MASK, + .val = PMX_TIMER_2_3_MASK, + }, +}; + +static struct spear_modemux timer_2_3_modemux[] = { + { + .modes = ~0, + .muxregs = timer_2_3_muxreg, + .nmuxregs = ARRAY_SIZE(timer_2_3_muxreg), + }, +}; + +struct spear_pingroup spear3xx_timer_2_3_pingroup = { + .name = "timer_2_3_grp", + .pins = timer_2_3_pins, + .npins = ARRAY_SIZE(timer_2_3_pins), + .modemuxs = timer_2_3_modemux, + .nmodemuxs = ARRAY_SIZE(timer_2_3_modemux), +}; + +static const char *const timer_2_3_grps[] = { "timer_2_3_grp" }; +struct spear_function spear3xx_timer_2_3_function = { + .name = "timer_2_3", + .groups = timer_2_3_grps, + .ngroups = ARRAY_SIZE(timer_2_3_grps), +}; + +struct spear_pinctrl_machdata spear3xx_machdata = { + .pins = spear3xx_pins, + .npins = ARRAY_SIZE(spear3xx_pins), +}; diff --git a/drivers/pinctrl/spear/pinctrl-spear3xx.h b/drivers/pinctrl/spear/pinctrl-spear3xx.h new file mode 100644 index 000000000000..5d5fdd8df7b8 --- /dev/null +++ b/drivers/pinctrl/spear/pinctrl-spear3xx.h @@ -0,0 +1,92 @@ +/* + * Header file for the ST Microelectronics SPEAr3xx pinmux + * + * Copyright (C) 2012 ST Microelectronics + * Viresh Kumar + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __PINMUX_SPEAR3XX_H__ +#define __PINMUX_SPEAR3XX_H__ + +#include "pinctrl-spear.h" + +/* pad mux declarations */ +#define PMX_FIRDA_MASK (1 << 14) +#define PMX_I2C_MASK (1 << 13) +#define PMX_SSP_CS_MASK (1 << 12) +#define PMX_SSP_MASK (1 << 11) +#define PMX_MII_MASK (1 << 10) +#define PMX_GPIO_PIN0_MASK (1 << 9) +#define PMX_GPIO_PIN1_MASK (1 << 8) +#define PMX_GPIO_PIN2_MASK (1 << 7) +#define PMX_GPIO_PIN3_MASK (1 << 6) +#define PMX_GPIO_PIN4_MASK (1 << 5) +#define PMX_GPIO_PIN5_MASK (1 << 4) +#define PMX_UART0_MODEM_MASK (1 << 3) +#define PMX_UART0_MASK (1 << 2) +#define PMX_TIMER_2_3_MASK (1 << 1) +#define PMX_TIMER_0_1_MASK (1 << 0) + +extern struct spear_pingroup spear3xx_firda_pingroup; +extern struct spear_pingroup spear3xx_gpio0_pin0_pingroup; +extern struct spear_pingroup spear3xx_gpio0_pin1_pingroup; +extern struct spear_pingroup spear3xx_gpio0_pin2_pingroup; +extern struct spear_pingroup spear3xx_gpio0_pin3_pingroup; +extern struct spear_pingroup spear3xx_gpio0_pin4_pingroup; +extern struct spear_pingroup spear3xx_gpio0_pin5_pingroup; +extern struct spear_pingroup spear3xx_i2c_pingroup; +extern struct spear_pingroup spear3xx_mii_pingroup; +extern struct spear_pingroup spear3xx_ssp_cs_pingroup; +extern struct spear_pingroup spear3xx_ssp_pingroup; +extern struct spear_pingroup spear3xx_timer_0_1_pingroup; +extern struct spear_pingroup spear3xx_timer_2_3_pingroup; +extern struct spear_pingroup spear3xx_uart0_ext_pingroup; +extern struct spear_pingroup spear3xx_uart0_pingroup; + +#define SPEAR3XX_COMMON_PINGROUPS \ + &spear3xx_firda_pingroup, \ + &spear3xx_gpio0_pin0_pingroup, \ + &spear3xx_gpio0_pin1_pingroup, \ + &spear3xx_gpio0_pin2_pingroup, \ + &spear3xx_gpio0_pin3_pingroup, \ + &spear3xx_gpio0_pin4_pingroup, \ + &spear3xx_gpio0_pin5_pingroup, \ + &spear3xx_i2c_pingroup, \ + &spear3xx_mii_pingroup, \ + &spear3xx_ssp_cs_pingroup, \ + &spear3xx_ssp_pingroup, \ + &spear3xx_timer_0_1_pingroup, \ + &spear3xx_timer_2_3_pingroup, \ + &spear3xx_uart0_ext_pingroup, \ + &spear3xx_uart0_pingroup + +extern struct spear_function spear3xx_firda_function; +extern struct spear_function spear3xx_gpio0_function; +extern struct spear_function spear3xx_i2c_function; +extern struct spear_function spear3xx_mii_function; +extern struct spear_function spear3xx_ssp_cs_function; +extern struct spear_function spear3xx_ssp_function; +extern struct spear_function spear3xx_timer_0_1_function; +extern struct spear_function spear3xx_timer_2_3_function; +extern struct spear_function spear3xx_uart0_ext_function; +extern struct spear_function spear3xx_uart0_function; + +#define SPEAR3XX_COMMON_FUNCTIONS \ + &spear3xx_firda_function, \ + &spear3xx_gpio0_function, \ + &spear3xx_i2c_function, \ + &spear3xx_mii_function, \ + &spear3xx_ssp_cs_function, \ + &spear3xx_ssp_function, \ + &spear3xx_timer_0_1_function, \ + &spear3xx_timer_2_3_function, \ + &spear3xx_uart0_ext_function, \ + &spear3xx_uart0_function + +extern struct spear_pinctrl_machdata spear3xx_machdata; + +#endif /* __PINMUX_SPEAR3XX_H__ */ -- cgit v1.2.3 From 8076dd1b7deeaeb5c6f0b58be95c0a13164e1a99 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Tue, 3 Apr 2012 17:27:10 +0530 Subject: SPEAr: Remove existing padmux support for SPEAr We must use pinctrl framework instead of defining per SoC pinmux drivers. This patch removes existing padmux support present for SPEAr platform. Signed-off-by: Viresh Kumar Acked-by: Linus Walleij Reviewed-by: Stephen Warren --- arch/arm/mach-spear3xx/include/mach/generic.h | 128 -------- arch/arm/mach-spear3xx/spear300.c | 389 +---------------------- arch/arm/mach-spear3xx/spear310.c | 161 +--------- arch/arm/mach-spear3xx/spear320.c | 403 +----------------------- arch/arm/mach-spear3xx/spear3xx.c | 425 -------------------------- arch/arm/plat-spear/Makefile | 2 +- arch/arm/plat-spear/include/plat/padmux.h | 92 ------ arch/arm/plat-spear/padmux.c | 164 ---------- 8 files changed, 4 insertions(+), 1760 deletions(-) delete mode 100644 arch/arm/plat-spear/include/plat/padmux.h delete mode 100644 arch/arm/plat-spear/padmux.c diff --git a/arch/arm/mach-spear3xx/include/mach/generic.h b/arch/arm/mach-spear3xx/include/mach/generic.h index a7569584cbe8..9603bf4d5119 100644 --- a/arch/arm/mach-spear3xx/include/mach/generic.h +++ b/arch/arm/mach-spear3xx/include/mach/generic.h @@ -20,7 +20,6 @@ #include #include #include -#include /* spear3xx declarations */ /* @@ -43,147 +42,20 @@ void __init spear3xx_dt_init_irq(void); void spear_restart(char, const char *); -/* pad mux declarations */ -#define PMX_FIRDA_MASK (1 << 14) -#define PMX_I2C_MASK (1 << 13) -#define PMX_SSP_CS_MASK (1 << 12) -#define PMX_SSP_MASK (1 << 11) -#define PMX_MII_MASK (1 << 10) -#define PMX_GPIO_PIN0_MASK (1 << 9) -#define PMX_GPIO_PIN1_MASK (1 << 8) -#define PMX_GPIO_PIN2_MASK (1 << 7) -#define PMX_GPIO_PIN3_MASK (1 << 6) -#define PMX_GPIO_PIN4_MASK (1 << 5) -#define PMX_GPIO_PIN5_MASK (1 << 4) -#define PMX_UART0_MODEM_MASK (1 << 3) -#define PMX_UART0_MASK (1 << 2) -#define PMX_TIMER_3_4_MASK (1 << 1) -#define PMX_TIMER_1_2_MASK (1 << 0) - -/* pad mux devices */ -extern struct pmx_dev spear3xx_pmx_firda; -extern struct pmx_dev spear3xx_pmx_i2c; -extern struct pmx_dev spear3xx_pmx_ssp_cs; -extern struct pmx_dev spear3xx_pmx_ssp; -extern struct pmx_dev spear3xx_pmx_mii; -extern struct pmx_dev spear3xx_pmx_gpio_pin0; -extern struct pmx_dev spear3xx_pmx_gpio_pin1; -extern struct pmx_dev spear3xx_pmx_gpio_pin2; -extern struct pmx_dev spear3xx_pmx_gpio_pin3; -extern struct pmx_dev spear3xx_pmx_gpio_pin4; -extern struct pmx_dev spear3xx_pmx_gpio_pin5; -extern struct pmx_dev spear3xx_pmx_uart0_modem; -extern struct pmx_dev spear3xx_pmx_uart0; -extern struct pmx_dev spear3xx_pmx_timer_3_4; -extern struct pmx_dev spear3xx_pmx_timer_1_2; - -#if defined(CONFIG_MACH_SPEAR310) || defined(CONFIG_MACH_SPEAR320) -/* padmux plgpio devices */ -extern struct pmx_dev spear3xx_pmx_plgpio_0_1; -extern struct pmx_dev spear3xx_pmx_plgpio_2_3; -extern struct pmx_dev spear3xx_pmx_plgpio_4_5; -extern struct pmx_dev spear3xx_pmx_plgpio_6_9; -extern struct pmx_dev spear3xx_pmx_plgpio_10_27; -extern struct pmx_dev spear3xx_pmx_plgpio_28; -extern struct pmx_dev spear3xx_pmx_plgpio_29; -extern struct pmx_dev spear3xx_pmx_plgpio_30; -extern struct pmx_dev spear3xx_pmx_plgpio_31; -extern struct pmx_dev spear3xx_pmx_plgpio_32; -extern struct pmx_dev spear3xx_pmx_plgpio_33; -extern struct pmx_dev spear3xx_pmx_plgpio_34_36; -extern struct pmx_dev spear3xx_pmx_plgpio_37_42; -extern struct pmx_dev spear3xx_pmx_plgpio_43_44_47_48; -extern struct pmx_dev spear3xx_pmx_plgpio_45_46_49_50; -#endif - /* spear300 declarations */ #ifdef CONFIG_MACH_SPEAR300 -/* pad mux modes */ -extern struct pmx_mode spear300_nand_mode; -extern struct pmx_mode spear300_nor_mode; -extern struct pmx_mode spear300_photo_frame_mode; -extern struct pmx_mode spear300_lend_ip_phone_mode; -extern struct pmx_mode spear300_hend_ip_phone_mode; -extern struct pmx_mode spear300_lend_wifi_phone_mode; -extern struct pmx_mode spear300_hend_wifi_phone_mode; -extern struct pmx_mode spear300_ata_pabx_wi2s_mode; -extern struct pmx_mode spear300_ata_pabx_i2s_mode; -extern struct pmx_mode spear300_caml_lcdw_mode; -extern struct pmx_mode spear300_camu_lcd_mode; -extern struct pmx_mode spear300_camu_wlcd_mode; -extern struct pmx_mode spear300_caml_lcd_mode; - -/* pad mux devices */ -extern struct pmx_dev spear300_pmx_fsmc_2_chips; -extern struct pmx_dev spear300_pmx_fsmc_4_chips; -extern struct pmx_dev spear300_pmx_keyboard; -extern struct pmx_dev spear300_pmx_clcd; -extern struct pmx_dev spear300_pmx_telecom_gpio; -extern struct pmx_dev spear300_pmx_telecom_tdm; -extern struct pmx_dev spear300_pmx_telecom_spi_cs_i2c_clk; -extern struct pmx_dev spear300_pmx_telecom_camera; -extern struct pmx_dev spear300_pmx_telecom_dac; -extern struct pmx_dev spear300_pmx_telecom_i2s; -extern struct pmx_dev spear300_pmx_telecom_boot_pins; -extern struct pmx_dev spear300_pmx_telecom_sdhci_4bit; -extern struct pmx_dev spear300_pmx_telecom_sdhci_8bit; -extern struct pmx_dev spear300_pmx_gpio1; - -/* Add spear300 machine declarations here */ void __init spear300_clk_init(void); #endif /* CONFIG_MACH_SPEAR300 */ /* spear310 declarations */ #ifdef CONFIG_MACH_SPEAR310 -/* pad mux devices */ -extern struct pmx_dev spear310_pmx_emi_cs_0_1_4_5; -extern struct pmx_dev spear310_pmx_emi_cs_2_3; -extern struct pmx_dev spear310_pmx_uart1; -extern struct pmx_dev spear310_pmx_uart2; -extern struct pmx_dev spear310_pmx_uart3_4_5; -extern struct pmx_dev spear310_pmx_fsmc; -extern struct pmx_dev spear310_pmx_rs485_0_1; -extern struct pmx_dev spear310_pmx_tdm0; - -/* Add spear310 machine declarations here */ void __init spear310_clk_init(void); #endif /* CONFIG_MACH_SPEAR310 */ /* spear320 declarations */ #ifdef CONFIG_MACH_SPEAR320 -/* pad mux modes */ -extern struct pmx_mode spear320_auto_net_smii_mode; -extern struct pmx_mode spear320_auto_net_mii_mode; -extern struct pmx_mode spear320_auto_exp_mode; -extern struct pmx_mode spear320_small_printers_mode; - -/* pad mux devices */ -extern struct pmx_dev spear320_pmx_clcd; -extern struct pmx_dev spear320_pmx_emi; -extern struct pmx_dev spear320_pmx_fsmc; -extern struct pmx_dev spear320_pmx_spp; -extern struct pmx_dev spear320_pmx_sdhci; -extern struct pmx_dev spear320_pmx_i2s; -extern struct pmx_dev spear320_pmx_uart1; -extern struct pmx_dev spear320_pmx_uart1_modem; -extern struct pmx_dev spear320_pmx_uart2; -extern struct pmx_dev spear320_pmx_touchscreen; -extern struct pmx_dev spear320_pmx_can; -extern struct pmx_dev spear320_pmx_sdhci_led; -extern struct pmx_dev spear320_pmx_pwm0; -extern struct pmx_dev spear320_pmx_pwm1; -extern struct pmx_dev spear320_pmx_pwm2; -extern struct pmx_dev spear320_pmx_pwm3; -extern struct pmx_dev spear320_pmx_ssp1; -extern struct pmx_dev spear320_pmx_ssp2; -extern struct pmx_dev spear320_pmx_mii1; -extern struct pmx_dev spear320_pmx_smii0; -extern struct pmx_dev spear320_pmx_smii1; -extern struct pmx_dev spear320_pmx_i2c1; - -/* Add spear320 machine declarations here */ void __init spear320_clk_init(void); #endif /* CONFIG_MACH_SPEAR320 */ diff --git a/arch/arm/mach-spear3xx/spear300.c b/arch/arm/mach-spear3xx/spear300.c index f46fc2692ab6..2db0bd14e481 100644 --- a/arch/arm/mach-spear3xx/spear300.c +++ b/arch/arm/mach-spear3xx/spear300.c @@ -21,357 +21,6 @@ #include #include -/* pad multiplexing support */ -/* muxing registers */ -#define PAD_MUX_CONFIG_REG 0x00 -#define MODE_CONFIG_REG 0x04 - -/* modes */ -#define NAND_MODE (1 << 0) -#define NOR_MODE (1 << 1) -#define PHOTO_FRAME_MODE (1 << 2) -#define LEND_IP_PHONE_MODE (1 << 3) -#define HEND_IP_PHONE_MODE (1 << 4) -#define LEND_WIFI_PHONE_MODE (1 << 5) -#define HEND_WIFI_PHONE_MODE (1 << 6) -#define ATA_PABX_WI2S_MODE (1 << 7) -#define ATA_PABX_I2S_MODE (1 << 8) -#define CAML_LCDW_MODE (1 << 9) -#define CAMU_LCD_MODE (1 << 10) -#define CAMU_WLCD_MODE (1 << 11) -#define CAML_LCD_MODE (1 << 12) -#define ALL_MODES 0x1FFF - -struct pmx_mode spear300_nand_mode = { - .id = NAND_MODE, - .name = "nand mode", - .mask = 0x00, -}; - -struct pmx_mode spear300_nor_mode = { - .id = NOR_MODE, - .name = "nor mode", - .mask = 0x01, -}; - -struct pmx_mode spear300_photo_frame_mode = { - .id = PHOTO_FRAME_MODE, - .name = "photo frame mode", - .mask = 0x02, -}; - -struct pmx_mode spear300_lend_ip_phone_mode = { - .id = LEND_IP_PHONE_MODE, - .name = "lend ip phone mode", - .mask = 0x03, -}; - -struct pmx_mode spear300_hend_ip_phone_mode = { - .id = HEND_IP_PHONE_MODE, - .name = "hend ip phone mode", - .mask = 0x04, -}; - -struct pmx_mode spear300_lend_wifi_phone_mode = { - .id = LEND_WIFI_PHONE_MODE, - .name = "lend wifi phone mode", - .mask = 0x05, -}; - -struct pmx_mode spear300_hend_wifi_phone_mode = { - .id = HEND_WIFI_PHONE_MODE, - .name = "hend wifi phone mode", - .mask = 0x06, -}; - -struct pmx_mode spear300_ata_pabx_wi2s_mode = { - .id = ATA_PABX_WI2S_MODE, - .name = "ata pabx wi2s mode", - .mask = 0x07, -}; - -struct pmx_mode spear300_ata_pabx_i2s_mode = { - .id = ATA_PABX_I2S_MODE, - .name = "ata pabx i2s mode", - .mask = 0x08, -}; - -struct pmx_mode spear300_caml_lcdw_mode = { - .id = CAML_LCDW_MODE, - .name = "caml lcdw mode", - .mask = 0x0C, -}; - -struct pmx_mode spear300_camu_lcd_mode = { - .id = CAMU_LCD_MODE, - .name = "camu lcd mode", - .mask = 0x0D, -}; - -struct pmx_mode spear300_camu_wlcd_mode = { - .id = CAMU_WLCD_MODE, - .name = "camu wlcd mode", - .mask = 0x0E, -}; - -struct pmx_mode spear300_caml_lcd_mode = { - .id = CAML_LCD_MODE, - .name = "caml lcd mode", - .mask = 0x0F, -}; - -/* devices */ -static struct pmx_dev_mode pmx_fsmc_2_chips_modes[] = { - { - .ids = NAND_MODE | NOR_MODE | PHOTO_FRAME_MODE | - ATA_PABX_WI2S_MODE | ATA_PABX_I2S_MODE, - .mask = PMX_FIRDA_MASK, - }, -}; - -struct pmx_dev spear300_pmx_fsmc_2_chips = { - .name = "fsmc_2_chips", - .modes = pmx_fsmc_2_chips_modes, - .mode_count = ARRAY_SIZE(pmx_fsmc_2_chips_modes), - .enb_on_reset = 1, -}; - -static struct pmx_dev_mode pmx_fsmc_4_chips_modes[] = { - { - .ids = NAND_MODE | NOR_MODE | PHOTO_FRAME_MODE | - ATA_PABX_WI2S_MODE | ATA_PABX_I2S_MODE, - .mask = PMX_FIRDA_MASK | PMX_UART0_MASK, - }, -}; - -struct pmx_dev spear300_pmx_fsmc_4_chips = { - .name = "fsmc_4_chips", - .modes = pmx_fsmc_4_chips_modes, - .mode_count = ARRAY_SIZE(pmx_fsmc_4_chips_modes), - .enb_on_reset = 1, -}; - -static struct pmx_dev_mode pmx_keyboard_modes[] = { - { - .ids = LEND_IP_PHONE_MODE | HEND_IP_PHONE_MODE | - LEND_WIFI_PHONE_MODE | HEND_WIFI_PHONE_MODE | - CAML_LCDW_MODE | CAMU_LCD_MODE | CAMU_WLCD_MODE | - CAML_LCD_MODE, - .mask = 0x0, - }, -}; - -struct pmx_dev spear300_pmx_keyboard = { - .name = "keyboard", - .modes = pmx_keyboard_modes, - .mode_count = ARRAY_SIZE(pmx_keyboard_modes), - .enb_on_reset = 1, -}; - -static struct pmx_dev_mode pmx_clcd_modes[] = { - { - .ids = PHOTO_FRAME_MODE, - .mask = PMX_TIMER_1_2_MASK | PMX_TIMER_3_4_MASK , - }, { - .ids = HEND_IP_PHONE_MODE | HEND_WIFI_PHONE_MODE | - CAMU_LCD_MODE | CAML_LCD_MODE, - .mask = PMX_TIMER_3_4_MASK, - }, -}; - -struct pmx_dev spear300_pmx_clcd = { - .name = "clcd", - .modes = pmx_clcd_modes, - .mode_count = ARRAY_SIZE(pmx_clcd_modes), - .enb_on_reset = 1, -}; - -static struct pmx_dev_mode pmx_telecom_gpio_modes[] = { - { - .ids = PHOTO_FRAME_MODE | CAMU_LCD_MODE | CAML_LCD_MODE, - .mask = PMX_MII_MASK, - }, { - .ids = LEND_IP_PHONE_MODE | LEND_WIFI_PHONE_MODE, - .mask = PMX_MII_MASK | PMX_TIMER_1_2_MASK | PMX_TIMER_3_4_MASK, - }, { - .ids = ATA_PABX_I2S_MODE | CAML_LCDW_MODE | CAMU_WLCD_MODE, - .mask = PMX_MII_MASK | PMX_TIMER_3_4_MASK, - }, { - .ids = HEND_IP_PHONE_MODE | HEND_WIFI_PHONE_MODE, - .mask = PMX_MII_MASK | PMX_TIMER_1_2_MASK, - }, { - .ids = ATA_PABX_WI2S_MODE, - .mask = PMX_MII_MASK | PMX_TIMER_1_2_MASK | PMX_TIMER_3_4_MASK - | PMX_UART0_MODEM_MASK, - }, -}; - -struct pmx_dev spear300_pmx_telecom_gpio = { - .name = "telecom_gpio", - .modes = pmx_telecom_gpio_modes, - .mode_count = ARRAY_SIZE(pmx_telecom_gpio_modes), - .enb_on_reset = 1, -}; - -static struct pmx_dev_mode pmx_telecom_tdm_modes[] = { - { - .ids = PHOTO_FRAME_MODE | LEND_IP_PHONE_MODE | - HEND_IP_PHONE_MODE | LEND_WIFI_PHONE_MODE - | HEND_WIFI_PHONE_MODE | ATA_PABX_WI2S_MODE - | ATA_PABX_I2S_MODE | CAML_LCDW_MODE | CAMU_LCD_MODE - | CAMU_WLCD_MODE | CAML_LCD_MODE, - .mask = PMX_UART0_MODEM_MASK | PMX_SSP_CS_MASK, - }, -}; - -struct pmx_dev spear300_pmx_telecom_tdm = { - .name = "telecom_tdm", - .modes = pmx_telecom_tdm_modes, - .mode_count = ARRAY_SIZE(pmx_telecom_tdm_modes), - .enb_on_reset = 1, -}; - -static struct pmx_dev_mode pmx_telecom_spi_cs_i2c_clk_modes[] = { - { - .ids = LEND_IP_PHONE_MODE | HEND_IP_PHONE_MODE | - LEND_WIFI_PHONE_MODE | HEND_WIFI_PHONE_MODE - | ATA_PABX_WI2S_MODE | ATA_PABX_I2S_MODE | - CAML_LCDW_MODE | CAML_LCD_MODE, - .mask = PMX_TIMER_1_2_MASK | PMX_TIMER_3_4_MASK, - }, -}; - -struct pmx_dev spear300_pmx_telecom_spi_cs_i2c_clk = { - .name = "telecom_spi_cs_i2c_clk", - .modes = pmx_telecom_spi_cs_i2c_clk_modes, - .mode_count = ARRAY_SIZE(pmx_telecom_spi_cs_i2c_clk_modes), - .enb_on_reset = 1, -}; - -static struct pmx_dev_mode pmx_telecom_camera_modes[] = { - { - .ids = CAML_LCDW_MODE | CAML_LCD_MODE, - .mask = PMX_MII_MASK, - }, { - .ids = CAMU_LCD_MODE | CAMU_WLCD_MODE, - .mask = PMX_TIMER_1_2_MASK | PMX_TIMER_3_4_MASK | PMX_MII_MASK, - }, -}; - -struct pmx_dev spear300_pmx_telecom_camera = { - .name = "telecom_camera", - .modes = pmx_telecom_camera_modes, - .mode_count = ARRAY_SIZE(pmx_telecom_camera_modes), - .enb_on_reset = 1, -}; - -static struct pmx_dev_mode pmx_telecom_dac_modes[] = { - { - .ids = ATA_PABX_I2S_MODE | CAML_LCDW_MODE | CAMU_LCD_MODE - | CAMU_WLCD_MODE | CAML_LCD_MODE, - .mask = PMX_TIMER_1_2_MASK, - }, -}; - -struct pmx_dev spear300_pmx_telecom_dac = { - .name = "telecom_dac", - .modes = pmx_telecom_dac_modes, - .mode_count = ARRAY_SIZE(pmx_telecom_dac_modes), - .enb_on_reset = 1, -}; - -static struct pmx_dev_mode pmx_telecom_i2s_modes[] = { - { - .ids = LEND_IP_PHONE_MODE | HEND_IP_PHONE_MODE - | LEND_WIFI_PHONE_MODE | HEND_WIFI_PHONE_MODE | - ATA_PABX_I2S_MODE | CAML_LCDW_MODE | CAMU_LCD_MODE - | CAMU_WLCD_MODE | CAML_LCD_MODE, - .mask = PMX_UART0_MODEM_MASK, - }, -}; - -struct pmx_dev spear300_pmx_telecom_i2s = { - .name = "telecom_i2s", - .modes = pmx_telecom_i2s_modes, - .mode_count = ARRAY_SIZE(pmx_telecom_i2s_modes), - .enb_on_reset = 1, -}; - -static struct pmx_dev_mode pmx_telecom_boot_pins_modes[] = { - { - .ids = NAND_MODE | NOR_MODE, - .mask = PMX_UART0_MODEM_MASK | PMX_TIMER_1_2_MASK | - PMX_TIMER_3_4_MASK, - }, -}; - -struct pmx_dev spear300_pmx_telecom_boot_pins = { - .name = "telecom_boot_pins", - .modes = pmx_telecom_boot_pins_modes, - .mode_count = ARRAY_SIZE(pmx_telecom_boot_pins_modes), - .enb_on_reset = 1, -}; - -static struct pmx_dev_mode pmx_telecom_sdhci_4bit_modes[] = { - { - .ids = PHOTO_FRAME_MODE | LEND_IP_PHONE_MODE | - HEND_IP_PHONE_MODE | LEND_WIFI_PHONE_MODE | - HEND_WIFI_PHONE_MODE | CAML_LCDW_MODE | CAMU_LCD_MODE | - CAMU_WLCD_MODE | CAML_LCD_MODE | ATA_PABX_WI2S_MODE | - ATA_PABX_I2S_MODE, - .mask = PMX_GPIO_PIN0_MASK | PMX_GPIO_PIN1_MASK | - PMX_GPIO_PIN2_MASK | PMX_GPIO_PIN3_MASK | - PMX_GPIO_PIN4_MASK | PMX_GPIO_PIN5_MASK, - }, -}; - -struct pmx_dev spear300_pmx_telecom_sdhci_4bit = { - .name = "telecom_sdhci_4bit", - .modes = pmx_telecom_sdhci_4bit_modes, - .mode_count = ARRAY_SIZE(pmx_telecom_sdhci_4bit_modes), - .enb_on_reset = 1, -}; - -static struct pmx_dev_mode pmx_telecom_sdhci_8bit_modes[] = { - { - .ids = PHOTO_FRAME_MODE | LEND_IP_PHONE_MODE | - HEND_IP_PHONE_MODE | LEND_WIFI_PHONE_MODE | - HEND_WIFI_PHONE_MODE | CAML_LCDW_MODE | CAMU_LCD_MODE | - CAMU_WLCD_MODE | CAML_LCD_MODE, - .mask = PMX_GPIO_PIN0_MASK | PMX_GPIO_PIN1_MASK | - PMX_GPIO_PIN2_MASK | PMX_GPIO_PIN3_MASK | - PMX_GPIO_PIN4_MASK | PMX_GPIO_PIN5_MASK | PMX_MII_MASK, - }, -}; - -struct pmx_dev spear300_pmx_telecom_sdhci_8bit = { - .name = "telecom_sdhci_8bit", - .modes = pmx_telecom_sdhci_8bit_modes, - .mode_count = ARRAY_SIZE(pmx_telecom_sdhci_8bit_modes), - .enb_on_reset = 1, -}; - -static struct pmx_dev_mode pmx_gpio1_modes[] = { - { - .ids = PHOTO_FRAME_MODE, - .mask = PMX_UART0_MODEM_MASK | PMX_TIMER_1_2_MASK | - PMX_TIMER_3_4_MASK, - }, -}; - -struct pmx_dev spear300_pmx_gpio1 = { - .name = "arm gpio1", - .modes = pmx_gpio1_modes, - .mode_count = ARRAY_SIZE(pmx_gpio1_modes), - .enb_on_reset = 1, -}; - -/* pmx driver structure */ -static struct pmx_driver pmx_driver = { - .mode_reg = {.offset = MODE_CONFIG_REG, .mask = 0x0000000f}, - .mux_reg = {.offset = PAD_MUX_CONFIG_REG, .mask = 0x00007fff}, -}; - /* spear3xx shared irq */ static struct shirq_dev_config shirq_ras1_config[] = { { @@ -425,22 +74,6 @@ static struct spear_shirq shirq_ras1 = { }, }; -/* padmux devices to enable */ -static struct pmx_dev *spear300_evb_pmx_devs[] = { - /* spear3xx specific devices */ - &spear3xx_pmx_i2c, - &spear3xx_pmx_ssp_cs, - &spear3xx_pmx_ssp, - &spear3xx_pmx_mii, - &spear3xx_pmx_uart0, - - /* spear300 specific devices */ - &spear300_pmx_fsmc_2_chips, - &spear300_pmx_clcd, - &spear300_pmx_telecom_sdhci_4bit, - &spear300_pmx_gpio1, -}; - /* DMAC platform data's slave info */ struct pl08x_channel_data spear300_dma_info[] = { { @@ -639,7 +272,7 @@ static struct of_dev_auxdata spear300_auxdata_lookup[] __initdata = { static void __init spear300_dt_init(void) { - int ret = -EINVAL; + int ret; pl080_plat_data.slave_channels = spear300_dma_info; pl080_plat_data.num_slave_channels = ARRAY_SIZE(spear300_dma_info); @@ -654,26 +287,6 @@ static void __init spear300_dt_init(void) if (ret) pr_err("Error registering Shared IRQ\n"); } - - if (of_machine_is_compatible("st,spear300-evb")) { - /* pmx initialization */ - pmx_driver.mode = &spear300_photo_frame_mode; - pmx_driver.devs = spear300_evb_pmx_devs; - pmx_driver.devs_count = ARRAY_SIZE(spear300_evb_pmx_devs); - - pmx_driver.base = ioremap(SPEAR300_SOC_CONFIG_BASE, SZ_4K); - if (pmx_driver.base) { - ret = pmx_register(&pmx_driver); - if (ret) - pr_err("padmux: registration failed. err no: %d\n", - ret); - /* Free Mapping, device selection already done */ - iounmap(pmx_driver.base); - } - - if (ret) - pr_err("Initialization Failed"); - } } static const char * const spear300_dt_board_compat[] = { diff --git a/arch/arm/mach-spear3xx/spear310.c b/arch/arm/mach-spear3xx/spear310.c index 063e7da0438a..aec07c951205 100644 --- a/arch/arm/mach-spear3xx/spear310.c +++ b/arch/arm/mach-spear3xx/spear310.c @@ -22,128 +22,6 @@ #include #include -/* pad multiplexing support */ -/* muxing registers */ -#define PAD_MUX_CONFIG_REG 0x08 - -/* devices */ -static struct pmx_dev_mode pmx_emi_cs_0_1_4_5_modes[] = { - { - .ids = 0x00, - .mask = PMX_TIMER_3_4_MASK, - }, -}; - -struct pmx_dev spear310_pmx_emi_cs_0_1_4_5 = { - .name = "emi_cs_0_1_4_5", - .modes = pmx_emi_cs_0_1_4_5_modes, - .mode_count = ARRAY_SIZE(pmx_emi_cs_0_1_4_5_modes), - .enb_on_reset = 1, -}; - -static struct pmx_dev_mode pmx_emi_cs_2_3_modes[] = { - { - .ids = 0x00, - .mask = PMX_TIMER_1_2_MASK, - }, -}; - -struct pmx_dev spear310_pmx_emi_cs_2_3 = { - .name = "emi_cs_2_3", - .modes = pmx_emi_cs_2_3_modes, - .mode_count = ARRAY_SIZE(pmx_emi_cs_2_3_modes), - .enb_on_reset = 1, -}; - -static struct pmx_dev_mode pmx_uart1_modes[] = { - { - .ids = 0x00, - .mask = PMX_FIRDA_MASK, - }, -}; - -struct pmx_dev spear310_pmx_uart1 = { - .name = "uart1", - .modes = pmx_uart1_modes, - .mode_count = ARRAY_SIZE(pmx_uart1_modes), - .enb_on_reset = 1, -}; - -static struct pmx_dev_mode pmx_uart2_modes[] = { - { - .ids = 0x00, - .mask = PMX_TIMER_1_2_MASK, - }, -}; - -struct pmx_dev spear310_pmx_uart2 = { - .name = "uart2", - .modes = pmx_uart2_modes, - .mode_count = ARRAY_SIZE(pmx_uart2_modes), - .enb_on_reset = 1, -}; - -static struct pmx_dev_mode pmx_uart3_4_5_modes[] = { - { - .ids = 0x00, - .mask = PMX_UART0_MODEM_MASK, - }, -}; - -struct pmx_dev spear310_pmx_uart3_4_5 = { - .name = "uart3_4_5", - .modes = pmx_uart3_4_5_modes, - .mode_count = ARRAY_SIZE(pmx_uart3_4_5_modes), - .enb_on_reset = 1, -}; - -static struct pmx_dev_mode pmx_fsmc_modes[] = { - { - .ids = 0x00, - .mask = PMX_SSP_CS_MASK, - }, -}; - -struct pmx_dev spear310_pmx_fsmc = { - .name = "fsmc", - .modes = pmx_fsmc_modes, - .mode_count = ARRAY_SIZE(pmx_fsmc_modes), - .enb_on_reset = 1, -}; - -static struct pmx_dev_mode pmx_rs485_0_1_modes[] = { - { - .ids = 0x00, - .mask = PMX_MII_MASK, - }, -}; - -struct pmx_dev spear310_pmx_rs485_0_1 = { - .name = "rs485_0_1", - .modes = pmx_rs485_0_1_modes, - .mode_count = ARRAY_SIZE(pmx_rs485_0_1_modes), - .enb_on_reset = 1, -}; - -static struct pmx_dev_mode pmx_tdm0_modes[] = { - { - .ids = 0x00, - .mask = PMX_MII_MASK, - }, -}; - -struct pmx_dev spear310_pmx_tdm0 = { - .name = "tdm0", - .modes = pmx_tdm0_modes, - .mode_count = ARRAY_SIZE(pmx_tdm0_modes), - .enb_on_reset = 1, -}; - -/* pmx driver structure */ -static struct pmx_driver pmx_driver = { - .mux_reg = {.offset = PAD_MUX_CONFIG_REG, .mask = 0x00007fff}, -}; - /* spear3xx shared irq */ static struct shirq_dev_config shirq_ras1_config[] = { { @@ -260,30 +138,6 @@ static struct spear_shirq shirq_intrcomm_ras = { }, }; -/* padmux devices to enable */ -static struct pmx_dev *spear310_evb_pmx_devs[] = { - /* spear3xx specific devices */ - &spear3xx_pmx_i2c, - &spear3xx_pmx_ssp, - &spear3xx_pmx_gpio_pin0, - &spear3xx_pmx_gpio_pin1, - &spear3xx_pmx_gpio_pin2, - &spear3xx_pmx_gpio_pin3, - &spear3xx_pmx_gpio_pin4, - &spear3xx_pmx_gpio_pin5, - &spear3xx_pmx_uart0, - - /* spear310 specific devices */ - &spear310_pmx_emi_cs_0_1_4_5, - &spear310_pmx_emi_cs_2_3, - &spear310_pmx_uart1, - &spear310_pmx_uart2, - &spear310_pmx_uart3_4_5, - &spear310_pmx_fsmc, - &spear310_pmx_rs485_0_1, - &spear310_pmx_tdm0, -}; - /* DMAC platform data's slave info */ struct pl08x_channel_data spear310_dma_info[] = { { @@ -518,7 +372,7 @@ static struct of_dev_auxdata spear310_auxdata_lookup[] __initdata = { static void __init spear310_dt_init(void) { void __iomem *base; - int ret = 0; + int ret; pl080_plat_data.slave_channels = spear310_dma_info; pl080_plat_data.num_slave_channels = ARRAY_SIZE(spear310_dma_info); @@ -553,19 +407,6 @@ static void __init spear310_dt_init(void) if (ret) pr_err("Error registering Shared IRQ 4\n"); } - - if (of_machine_is_compatible("st,spear310-evb")) { - /* pmx initialization */ - pmx_driver.base = base; - pmx_driver.mode = NULL; - pmx_driver.devs = spear310_evb_pmx_devs; - pmx_driver.devs_count = ARRAY_SIZE(spear310_evb_pmx_devs); - - ret = pmx_register(&pmx_driver); - if (ret) - pr_err("padmux: registration failed. err no: %d\n", - ret); - } } static const char * const spear310_dt_board_compat[] = { diff --git a/arch/arm/mach-spear3xx/spear320.c b/arch/arm/mach-spear3xx/spear320.c index 1e74031e1213..4812c692ca35 100644 --- a/arch/arm/mach-spear3xx/spear320.c +++ b/arch/arm/mach-spear3xx/spear320.c @@ -23,373 +23,6 @@ #include #include -/* pad multiplexing support */ -/* muxing registers */ -#define PAD_MUX_CONFIG_REG 0x0C -#define MODE_CONFIG_REG 0x10 - -/* modes */ -#define AUTO_NET_SMII_MODE (1 << 0) -#define AUTO_NET_MII_MODE (1 << 1) -#define AUTO_EXP_MODE (1 << 2) -#define SMALL_PRINTERS_MODE (1 << 3) -#define ALL_MODES 0xF - -struct pmx_mode spear320_auto_net_smii_mode = { - .id = AUTO_NET_SMII_MODE, - .name = "Automation Networking SMII Mode", - .mask = 0x00, -}; - -struct pmx_mode spear320_auto_net_mii_mode = { - .id = AUTO_NET_MII_MODE, - .name = "Automation Networking MII Mode", - .mask = 0x01, -}; - -struct pmx_mode spear320_auto_exp_mode = { - .id = AUTO_EXP_MODE, - .name = "Automation Expanded Mode", - .mask = 0x02, -}; - -struct pmx_mode spear320_small_printers_mode = { - .id = SMALL_PRINTERS_MODE, - .name = "Small Printers Mode", - .mask = 0x03, -}; - -/* devices */ -static struct pmx_dev_mode pmx_clcd_modes[] = { - { - .ids = AUTO_NET_SMII_MODE, - .mask = 0x0, - }, -}; - -struct pmx_dev spear320_pmx_clcd = { - .name = "clcd", - .modes = pmx_clcd_modes, - .mode_count = ARRAY_SIZE(pmx_clcd_modes), - .enb_on_reset = 1, -}; - -static struct pmx_dev_mode pmx_emi_modes[] = { - { - .ids = AUTO_EXP_MODE, - .mask = PMX_TIMER_1_2_MASK | PMX_TIMER_3_4_MASK, - }, -}; - -struct pmx_dev spear320_pmx_emi = { - .name = "emi", - .modes = pmx_emi_modes, - .mode_count = ARRAY_SIZE(pmx_emi_modes), - .enb_on_reset = 1, -}; - -static struct pmx_dev_mode pmx_fsmc_modes[] = { - { - .ids = ALL_MODES, - .mask = 0x0, - }, -}; - -struct pmx_dev spear320_pmx_fsmc = { - .name = "fsmc", - .modes = pmx_fsmc_modes, - .mode_count = ARRAY_SIZE(pmx_fsmc_modes), - .enb_on_reset = 1, -}; - -static struct pmx_dev_mode pmx_spp_modes[] = { - { - .ids = SMALL_PRINTERS_MODE, - .mask = 0x0, - }, -}; - -struct pmx_dev spear320_pmx_spp = { - .name = "spp", - .modes = pmx_spp_modes, - .mode_count = ARRAY_SIZE(pmx_spp_modes), - .enb_on_reset = 1, -}; - -static struct pmx_dev_mode pmx_sdhci_modes[] = { - { - .ids = AUTO_NET_SMII_MODE | AUTO_NET_MII_MODE | - SMALL_PRINTERS_MODE, - .mask = PMX_TIMER_1_2_MASK | PMX_TIMER_3_4_MASK, - }, -}; - -struct pmx_dev spear320_pmx_sdhci = { - .name = "sdhci", - .modes = pmx_sdhci_modes, - .mode_count = ARRAY_SIZE(pmx_sdhci_modes), - .enb_on_reset = 1, -}; - -static struct pmx_dev_mode pmx_i2s_modes[] = { - { - .ids = AUTO_NET_SMII_MODE | AUTO_NET_MII_MODE, - .mask = PMX_UART0_MODEM_MASK, - }, -}; - -struct pmx_dev spear320_pmx_i2s = { - .name = "i2s", - .modes = pmx_i2s_modes, - .mode_count = ARRAY_SIZE(pmx_i2s_modes), - .enb_on_reset = 1, -}; - -static struct pmx_dev_mode pmx_uart1_modes[] = { - { - .ids = ALL_MODES, - .mask = PMX_GPIO_PIN0_MASK | PMX_GPIO_PIN1_MASK, - }, -}; - -struct pmx_dev spear320_pmx_uart1 = { - .name = "uart1", - .modes = pmx_uart1_modes, - .mode_count = ARRAY_SIZE(pmx_uart1_modes), - .enb_on_reset = 1, -}; - -static struct pmx_dev_mode pmx_uart1_modem_modes[] = { - { - .ids = AUTO_EXP_MODE, - .mask = PMX_TIMER_1_2_MASK | PMX_TIMER_3_4_MASK | - PMX_SSP_CS_MASK, - }, { - .ids = SMALL_PRINTERS_MODE, - .mask = PMX_GPIO_PIN3_MASK | PMX_GPIO_PIN4_MASK | - PMX_GPIO_PIN5_MASK | PMX_SSP_CS_MASK, - }, -}; - -struct pmx_dev spear320_pmx_uart1_modem = { - .name = "uart1_modem", - .modes = pmx_uart1_modem_modes, - .mode_count = ARRAY_SIZE(pmx_uart1_modem_modes), - .enb_on_reset = 1, -}; - -static struct pmx_dev_mode pmx_uart2_modes[] = { - { - .ids = ALL_MODES, - .mask = PMX_FIRDA_MASK, - }, -}; - -struct pmx_dev spear320_pmx_uart2 = { - .name = "uart2", - .modes = pmx_uart2_modes, - .mode_count = ARRAY_SIZE(pmx_uart2_modes), - .enb_on_reset = 1, -}; - -static struct pmx_dev_mode pmx_touchscreen_modes[] = { - { - .ids = AUTO_NET_SMII_MODE, - .mask = PMX_SSP_CS_MASK, - }, -}; - -struct pmx_dev spear320_pmx_touchscreen = { - .name = "touchscreen", - .modes = pmx_touchscreen_modes, - .mode_count = ARRAY_SIZE(pmx_touchscreen_modes), - .enb_on_reset = 1, -}; - -static struct pmx_dev_mode pmx_can_modes[] = { - { - .ids = AUTO_NET_SMII_MODE | AUTO_NET_MII_MODE | AUTO_EXP_MODE, - .mask = PMX_GPIO_PIN2_MASK | PMX_GPIO_PIN3_MASK | - PMX_GPIO_PIN4_MASK | PMX_GPIO_PIN5_MASK, - }, -}; - -struct pmx_dev spear320_pmx_can = { - .name = "can", - .modes = pmx_can_modes, - .mode_count = ARRAY_SIZE(pmx_can_modes), - .enb_on_reset = 1, -}; - -static struct pmx_dev_mode pmx_sdhci_led_modes[] = { - { - .ids = AUTO_NET_SMII_MODE | AUTO_NET_MII_MODE, - .mask = PMX_SSP_CS_MASK, - }, -}; - -struct pmx_dev spear320_pmx_sdhci_led = { - .name = "sdhci_led", - .modes = pmx_sdhci_led_modes, - .mode_count = ARRAY_SIZE(pmx_sdhci_led_modes), - .enb_on_reset = 1, -}; - -static struct pmx_dev_mode pmx_pwm0_modes[] = { - { - .ids = AUTO_NET_SMII_MODE | AUTO_NET_MII_MODE, - .mask = PMX_UART0_MODEM_MASK, - }, { - .ids = AUTO_EXP_MODE | SMALL_PRINTERS_MODE, - .mask = PMX_MII_MASK, - }, -}; - -struct pmx_dev spear320_pmx_pwm0 = { - .name = "pwm0", - .modes = pmx_pwm0_modes, - .mode_count = ARRAY_SIZE(pmx_pwm0_modes), - .enb_on_reset = 1, -}; - -static struct pmx_dev_mode pmx_pwm1_modes[] = { - { - .ids = AUTO_NET_SMII_MODE | AUTO_NET_MII_MODE, - .mask = PMX_UART0_MODEM_MASK, - }, { - .ids = AUTO_EXP_MODE | SMALL_PRINTERS_MODE, - .mask = PMX_MII_MASK, - }, -}; - -struct pmx_dev spear320_pmx_pwm1 = { - .name = "pwm1", - .modes = pmx_pwm1_modes, - .mode_count = ARRAY_SIZE(pmx_pwm1_modes), - .enb_on_reset = 1, -}; - -static struct pmx_dev_mode pmx_pwm2_modes[] = { - { - .ids = AUTO_NET_SMII_MODE | AUTO_NET_MII_MODE, - .mask = PMX_SSP_CS_MASK, - }, { - .ids = AUTO_EXP_MODE | SMALL_PRINTERS_MODE, - .mask = PMX_MII_MASK, - }, -}; - -struct pmx_dev spear320_pmx_pwm2 = { - .name = "pwm2", - .modes = pmx_pwm2_modes, - .mode_count = ARRAY_SIZE(pmx_pwm2_modes), - .enb_on_reset = 1, -}; - -static struct pmx_dev_mode pmx_pwm3_modes[] = { - { - .ids = AUTO_EXP_MODE | SMALL_PRINTERS_MODE | AUTO_NET_SMII_MODE, - .mask = PMX_MII_MASK, - }, -}; - -struct pmx_dev spear320_pmx_pwm3 = { - .name = "pwm3", - .modes = pmx_pwm3_modes, - .mode_count = ARRAY_SIZE(pmx_pwm3_modes), - .enb_on_reset = 1, -}; - -static struct pmx_dev_mode pmx_ssp1_modes[] = { - { - .ids = SMALL_PRINTERS_MODE | AUTO_NET_SMII_MODE, - .mask = PMX_MII_MASK, - }, -}; - -struct pmx_dev spear320_pmx_ssp1 = { - .name = "ssp1", - .modes = pmx_ssp1_modes, - .mode_count = ARRAY_SIZE(pmx_ssp1_modes), - .enb_on_reset = 1, -}; - -static struct pmx_dev_mode pmx_ssp2_modes[] = { - { - .ids = AUTO_NET_SMII_MODE, - .mask = PMX_MII_MASK, - }, -}; - -struct pmx_dev spear320_pmx_ssp2 = { - .name = "ssp2", - .modes = pmx_ssp2_modes, - .mode_count = ARRAY_SIZE(pmx_ssp2_modes), - .enb_on_reset = 1, -}; - -static struct pmx_dev_mode pmx_mii1_modes[] = { - { - .ids = AUTO_NET_MII_MODE, - .mask = 0x0, - }, -}; - -struct pmx_dev spear320_pmx_mii1 = { - .name = "mii1", - .modes = pmx_mii1_modes, - .mode_count = ARRAY_SIZE(pmx_mii1_modes), - .enb_on_reset = 1, -}; - -static struct pmx_dev_mode pmx_smii0_modes[] = { - { - .ids = AUTO_NET_SMII_MODE | AUTO_EXP_MODE | SMALL_PRINTERS_MODE, - .mask = PMX_MII_MASK, - }, -}; - -struct pmx_dev spear320_pmx_smii0 = { - .name = "smii0", - .modes = pmx_smii0_modes, - .mode_count = ARRAY_SIZE(pmx_smii0_modes), - .enb_on_reset = 1, -}; - -static struct pmx_dev_mode pmx_smii1_modes[] = { - { - .ids = AUTO_NET_SMII_MODE | SMALL_PRINTERS_MODE, - .mask = PMX_MII_MASK, - }, -}; - -struct pmx_dev spear320_pmx_smii1 = { - .name = "smii1", - .modes = pmx_smii1_modes, - .mode_count = ARRAY_SIZE(pmx_smii1_modes), - .enb_on_reset = 1, -}; - -static struct pmx_dev_mode pmx_i2c1_modes[] = { - { - .ids = AUTO_EXP_MODE, - .mask = 0x0, - }, -}; - -struct pmx_dev spear320_pmx_i2c1 = { - .name = "i2c1", - .modes = pmx_i2c1_modes, - .mode_count = ARRAY_SIZE(pmx_i2c1_modes), - .enb_on_reset = 1, -}; - -/* pmx driver structure */ -static struct pmx_driver pmx_driver = { - .mode_reg = {.offset = MODE_CONFIG_REG, .mask = 0x00000007}, - .mux_reg = {.offset = PAD_MUX_CONFIG_REG, .mask = 0x00007fff}, -}; - /* spear3xx shared irq */ static struct shirq_dev_config shirq_ras1_config[] = { { @@ -514,27 +147,6 @@ static struct spear_shirq shirq_intrcomm_ras = { }, }; -/* padmux devices to enable */ -static struct pmx_dev *spear320_evb_pmx_devs[] = { - /* spear3xx specific devices */ - &spear3xx_pmx_i2c, - &spear3xx_pmx_ssp, - &spear3xx_pmx_mii, - &spear3xx_pmx_uart0, - - /* spear320 specific devices */ - &spear320_pmx_fsmc, - &spear320_pmx_sdhci, - &spear320_pmx_i2s, - &spear320_pmx_uart1, - &spear320_pmx_uart2, - &spear320_pmx_can, - &spear320_pmx_pwm0, - &spear320_pmx_pwm1, - &spear320_pmx_pwm2, - &spear320_pmx_mii1, -}; - /* DMAC platform data's slave info */ struct pl08x_channel_data spear320_dma_info[] = { { @@ -772,7 +384,7 @@ static struct of_dev_auxdata spear320_auxdata_lookup[] __initdata = { static void __init spear320_dt_init(void) { void __iomem *base; - int ret = 0; + int ret; pl080_plat_data.slave_channels = spear320_dma_info; pl080_plat_data.num_slave_channels = ARRAY_SIZE(spear320_dma_info); @@ -801,19 +413,6 @@ static void __init spear320_dt_init(void) if (ret) pr_err("Error registering Shared IRQ 4\n"); } - - if (of_machine_is_compatible("st,spear320-evb")) { - /* pmx initialization */ - pmx_driver.base = base; - pmx_driver.mode = &spear320_auto_net_mii_mode; - pmx_driver.devs = spear320_evb_pmx_devs; - pmx_driver.devs_count = ARRAY_SIZE(spear320_evb_pmx_devs); - - ret = pmx_register(&pmx_driver); - if (ret) - pr_err("padmux: registration failed. err no: %d\n", - ret); - } } static const char * const spear320_dt_board_compat[] = { diff --git a/arch/arm/mach-spear3xx/spear3xx.c b/arch/arm/mach-spear3xx/spear3xx.c index 17d4ac9a95e1..12bf879a9ef1 100644 --- a/arch/arm/mach-spear3xx/spear3xx.c +++ b/arch/arm/mach-spear3xx/spear3xx.c @@ -23,431 +23,6 @@ #include #include -/* pad multiplexing support */ -/* devices */ -static struct pmx_dev_mode pmx_firda_modes[] = { - { - .ids = 0xffffffff, - .mask = PMX_FIRDA_MASK, - }, -}; - -struct pmx_dev spear3xx_pmx_firda = { - .name = "firda", - .modes = pmx_firda_modes, - .mode_count = ARRAY_SIZE(pmx_firda_modes), - .enb_on_reset = 0, -}; - -static struct pmx_dev_mode pmx_i2c_modes[] = { - { - .ids = 0xffffffff, - .mask = PMX_I2C_MASK, - }, -}; - -struct pmx_dev spear3xx_pmx_i2c = { - .name = "i2c", - .modes = pmx_i2c_modes, - .mode_count = ARRAY_SIZE(pmx_i2c_modes), - .enb_on_reset = 0, -}; - -static struct pmx_dev_mode pmx_ssp_cs_modes[] = { - { - .ids = 0xffffffff, - .mask = PMX_SSP_CS_MASK, - }, -}; - -struct pmx_dev spear3xx_pmx_ssp_cs = { - .name = "ssp_chip_selects", - .modes = pmx_ssp_cs_modes, - .mode_count = ARRAY_SIZE(pmx_ssp_cs_modes), - .enb_on_reset = 0, -}; - -static struct pmx_dev_mode pmx_ssp_modes[] = { - { - .ids = 0xffffffff, - .mask = PMX_SSP_MASK, - }, -}; - -struct pmx_dev spear3xx_pmx_ssp = { - .name = "ssp", - .modes = pmx_ssp_modes, - .mode_count = ARRAY_SIZE(pmx_ssp_modes), - .enb_on_reset = 0, -}; - -static struct pmx_dev_mode pmx_mii_modes[] = { - { - .ids = 0xffffffff, - .mask = PMX_MII_MASK, - }, -}; - -struct pmx_dev spear3xx_pmx_mii = { - .name = "mii", - .modes = pmx_mii_modes, - .mode_count = ARRAY_SIZE(pmx_mii_modes), - .enb_on_reset = 0, -}; - -static struct pmx_dev_mode pmx_gpio_pin0_modes[] = { - { - .ids = 0xffffffff, - .mask = PMX_GPIO_PIN0_MASK, - }, -}; - -struct pmx_dev spear3xx_pmx_gpio_pin0 = { - .name = "gpio_pin0", - .modes = pmx_gpio_pin0_modes, - .mode_count = ARRAY_SIZE(pmx_gpio_pin0_modes), - .enb_on_reset = 0, -}; - -static struct pmx_dev_mode pmx_gpio_pin1_modes[] = { - { - .ids = 0xffffffff, - .mask = PMX_GPIO_PIN1_MASK, - }, -}; - -struct pmx_dev spear3xx_pmx_gpio_pin1 = { - .name = "gpio_pin1", - .modes = pmx_gpio_pin1_modes, - .mode_count = ARRAY_SIZE(pmx_gpio_pin1_modes), - .enb_on_reset = 0, -}; - -static struct pmx_dev_mode pmx_gpio_pin2_modes[] = { - { - .ids = 0xffffffff, - .mask = PMX_GPIO_PIN2_MASK, - }, -}; - -struct pmx_dev spear3xx_pmx_gpio_pin2 = { - .name = "gpio_pin2", - .modes = pmx_gpio_pin2_modes, - .mode_count = ARRAY_SIZE(pmx_gpio_pin2_modes), - .enb_on_reset = 0, -}; - -static struct pmx_dev_mode pmx_gpio_pin3_modes[] = { - { - .ids = 0xffffffff, - .mask = PMX_GPIO_PIN3_MASK, - }, -}; - -struct pmx_dev spear3xx_pmx_gpio_pin3 = { - .name = "gpio_pin3", - .modes = pmx_gpio_pin3_modes, - .mode_count = ARRAY_SIZE(pmx_gpio_pin3_modes), - .enb_on_reset = 0, -}; - -static struct pmx_dev_mode pmx_gpio_pin4_modes[] = { - { - .ids = 0xffffffff, - .mask = PMX_GPIO_PIN4_MASK, - }, -}; - -struct pmx_dev spear3xx_pmx_gpio_pin4 = { - .name = "gpio_pin4", - .modes = pmx_gpio_pin4_modes, - .mode_count = ARRAY_SIZE(pmx_gpio_pin4_modes), - .enb_on_reset = 0, -}; - -static struct pmx_dev_mode pmx_gpio_pin5_modes[] = { - { - .ids = 0xffffffff, - .mask = PMX_GPIO_PIN5_MASK, - }, -}; - -struct pmx_dev spear3xx_pmx_gpio_pin5 = { - .name = "gpio_pin5", - .modes = pmx_gpio_pin5_modes, - .mode_count = ARRAY_SIZE(pmx_gpio_pin5_modes), - .enb_on_reset = 0, -}; - -static struct pmx_dev_mode pmx_uart0_modem_modes[] = { - { - .ids = 0xffffffff, - .mask = PMX_UART0_MODEM_MASK, - }, -}; - -struct pmx_dev spear3xx_pmx_uart0_modem = { - .name = "uart0_modem", - .modes = pmx_uart0_modem_modes, - .mode_count = ARRAY_SIZE(pmx_uart0_modem_modes), - .enb_on_reset = 0, -}; - -static struct pmx_dev_mode pmx_uart0_modes[] = { - { - .ids = 0xffffffff, - .mask = PMX_UART0_MASK, - }, -}; - -struct pmx_dev spear3xx_pmx_uart0 = { - .name = "uart0", - .modes = pmx_uart0_modes, - .mode_count = ARRAY_SIZE(pmx_uart0_modes), - .enb_on_reset = 0, -}; - -static struct pmx_dev_mode pmx_timer_3_4_modes[] = { - { - .ids = 0xffffffff, - .mask = PMX_TIMER_3_4_MASK, - }, -}; - -struct pmx_dev spear3xx_pmx_timer_3_4 = { - .name = "timer_3_4", - .modes = pmx_timer_3_4_modes, - .mode_count = ARRAY_SIZE(pmx_timer_3_4_modes), - .enb_on_reset = 0, -}; - -static struct pmx_dev_mode pmx_timer_1_2_modes[] = { - { - .ids = 0xffffffff, - .mask = PMX_TIMER_1_2_MASK, - }, -}; - -struct pmx_dev spear3xx_pmx_timer_1_2 = { - .name = "timer_1_2", - .modes = pmx_timer_1_2_modes, - .mode_count = ARRAY_SIZE(pmx_timer_1_2_modes), - .enb_on_reset = 0, -}; - -#if defined(CONFIG_MACH_SPEAR310) || defined(CONFIG_MACH_SPEAR320) -/* plgpios devices */ -static struct pmx_dev_mode pmx_plgpio_0_1_modes[] = { - { - .ids = 0x00, - .mask = PMX_FIRDA_MASK, - }, -}; - -struct pmx_dev spear3xx_pmx_plgpio_0_1 = { - .name = "plgpio 0 and 1", - .modes = pmx_plgpio_0_1_modes, - .mode_count = ARRAY_SIZE(pmx_plgpio_0_1_modes), - .enb_on_reset = 1, -}; - -static struct pmx_dev_mode pmx_plgpio_2_3_modes[] = { - { - .ids = 0x00, - .mask = PMX_UART0_MASK, - }, -}; - -struct pmx_dev spear3xx_pmx_plgpio_2_3 = { - .name = "plgpio 2 and 3", - .modes = pmx_plgpio_2_3_modes, - .mode_count = ARRAY_SIZE(pmx_plgpio_2_3_modes), - .enb_on_reset = 1, -}; - -static struct pmx_dev_mode pmx_plgpio_4_5_modes[] = { - { - .ids = 0x00, - .mask = PMX_I2C_MASK, - }, -}; - -struct pmx_dev spear3xx_pmx_plgpio_4_5 = { - .name = "plgpio 4 and 5", - .modes = pmx_plgpio_4_5_modes, - .mode_count = ARRAY_SIZE(pmx_plgpio_4_5_modes), - .enb_on_reset = 1, -}; - -static struct pmx_dev_mode pmx_plgpio_6_9_modes[] = { - { - .ids = 0x00, - .mask = PMX_SSP_MASK, - }, -}; - -struct pmx_dev spear3xx_pmx_plgpio_6_9 = { - .name = "plgpio 6 to 9", - .modes = pmx_plgpio_6_9_modes, - .mode_count = ARRAY_SIZE(pmx_plgpio_6_9_modes), - .enb_on_reset = 1, -}; - -static struct pmx_dev_mode pmx_plgpio_10_27_modes[] = { - { - .ids = 0x00, - .mask = PMX_MII_MASK, - }, -}; - -struct pmx_dev spear3xx_pmx_plgpio_10_27 = { - .name = "plgpio 10 to 27", - .modes = pmx_plgpio_10_27_modes, - .mode_count = ARRAY_SIZE(pmx_plgpio_10_27_modes), - .enb_on_reset = 1, -}; - -static struct pmx_dev_mode pmx_plgpio_28_modes[] = { - { - .ids = 0x00, - .mask = PMX_GPIO_PIN0_MASK, - }, -}; - -struct pmx_dev spear3xx_pmx_plgpio_28 = { - .name = "plgpio 28", - .modes = pmx_plgpio_28_modes, - .mode_count = ARRAY_SIZE(pmx_plgpio_28_modes), - .enb_on_reset = 1, -}; - -static struct pmx_dev_mode pmx_plgpio_29_modes[] = { - { - .ids = 0x00, - .mask = PMX_GPIO_PIN1_MASK, - }, -}; - -struct pmx_dev spear3xx_pmx_plgpio_29 = { - .name = "plgpio 29", - .modes = pmx_plgpio_29_modes, - .mode_count = ARRAY_SIZE(pmx_plgpio_29_modes), - .enb_on_reset = 1, -}; - -static struct pmx_dev_mode pmx_plgpio_30_modes[] = { - { - .ids = 0x00, - .mask = PMX_GPIO_PIN2_MASK, - }, -}; - -struct pmx_dev spear3xx_pmx_plgpio_30 = { - .name = "plgpio 30", - .modes = pmx_plgpio_30_modes, - .mode_count = ARRAY_SIZE(pmx_plgpio_30_modes), - .enb_on_reset = 1, -}; - -static struct pmx_dev_mode pmx_plgpio_31_modes[] = { - { - .ids = 0x00, - .mask = PMX_GPIO_PIN3_MASK, - }, -}; - -struct pmx_dev spear3xx_pmx_plgpio_31 = { - .name = "plgpio 31", - .modes = pmx_plgpio_31_modes, - .mode_count = ARRAY_SIZE(pmx_plgpio_31_modes), - .enb_on_reset = 1, -}; - -static struct pmx_dev_mode pmx_plgpio_32_modes[] = { - { - .ids = 0x00, - .mask = PMX_GPIO_PIN4_MASK, - }, -}; - -struct pmx_dev spear3xx_pmx_plgpio_32 = { - .name = "plgpio 32", - .modes = pmx_plgpio_32_modes, - .mode_count = ARRAY_SIZE(pmx_plgpio_32_modes), - .enb_on_reset = 1, -}; - -static struct pmx_dev_mode pmx_plgpio_33_modes[] = { - { - .ids = 0x00, - .mask = PMX_GPIO_PIN5_MASK, - }, -}; - -struct pmx_dev spear3xx_pmx_plgpio_33 = { - .name = "plgpio 33", - .modes = pmx_plgpio_33_modes, - .mode_count = ARRAY_SIZE(pmx_plgpio_33_modes), - .enb_on_reset = 1, -}; - -static struct pmx_dev_mode pmx_plgpio_34_36_modes[] = { - { - .ids = 0x00, - .mask = PMX_SSP_CS_MASK, - }, -}; - -struct pmx_dev spear3xx_pmx_plgpio_34_36 = { - .name = "plgpio 34 to 36", - .modes = pmx_plgpio_34_36_modes, - .mode_count = ARRAY_SIZE(pmx_plgpio_34_36_modes), - .enb_on_reset = 1, -}; - -static struct pmx_dev_mode pmx_plgpio_37_42_modes[] = { - { - .ids = 0x00, - .mask = PMX_UART0_MODEM_MASK, - }, -}; - -struct pmx_dev spear3xx_pmx_plgpio_37_42 = { - .name = "plgpio 37 to 42", - .modes = pmx_plgpio_37_42_modes, - .mode_count = ARRAY_SIZE(pmx_plgpio_37_42_modes), - .enb_on_reset = 1, -}; - -static struct pmx_dev_mode pmx_plgpio_43_44_47_48_modes[] = { - { - .ids = 0x00, - .mask = PMX_TIMER_1_2_MASK, - }, -}; - -struct pmx_dev spear3xx_pmx_plgpio_43_44_47_48 = { - .name = "plgpio 43, 44, 47 and 48", - .modes = pmx_plgpio_43_44_47_48_modes, - .mode_count = ARRAY_SIZE(pmx_plgpio_43_44_47_48_modes), - .enb_on_reset = 1, -}; - -static struct pmx_dev_mode pmx_plgpio_45_46_49_50_modes[] = { - { - .ids = 0x00, - .mask = PMX_TIMER_3_4_MASK, - }, -}; - -struct pmx_dev spear3xx_pmx_plgpio_45_46_49_50 = { - .name = "plgpio 45, 46, 49 and 50", - .modes = pmx_plgpio_45_46_49_50_modes, - .mode_count = ARRAY_SIZE(pmx_plgpio_45_46_49_50_modes), - .enb_on_reset = 1, -}; -#endif /* CONFIG_MACH_SPEAR310 || CONFIG_MACH_SPEAR320 */ - /* ssp device registration */ struct pl022_ssp_controller pl022_plat_data = { .bus_id = 0, diff --git a/arch/arm/plat-spear/Makefile b/arch/arm/plat-spear/Makefile index 4af6258d0fee..7744802c83e7 100644 --- a/arch/arm/plat-spear/Makefile +++ b/arch/arm/plat-spear/Makefile @@ -5,4 +5,4 @@ # Common support obj-y := clock.o restart.o time.o pl080.o -obj-$(CONFIG_ARCH_SPEAR3XX) += shirq.o padmux.o +obj-$(CONFIG_ARCH_SPEAR3XX) += shirq.o diff --git a/arch/arm/plat-spear/include/plat/padmux.h b/arch/arm/plat-spear/include/plat/padmux.h deleted file mode 100644 index 877f3adcf610..000000000000 --- a/arch/arm/plat-spear/include/plat/padmux.h +++ /dev/null @@ -1,92 +0,0 @@ -/* - * arch/arm/plat-spear/include/plat/padmux.h - * - * SPEAr platform specific gpio pads muxing file - * - * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __PLAT_PADMUX_H -#define __PLAT_PADMUX_H - -#include - -/* - * struct pmx_reg: configuration structure for mode reg and mux reg - * - * offset: offset of mode reg - * mask: mask of mode reg - */ -struct pmx_reg { - u32 offset; - u32 mask; -}; - -/* - * struct pmx_dev_mode: configuration structure every group of modes of a device - * - * ids: all modes for this configuration - * mask: mask for supported mode - */ -struct pmx_dev_mode { - u32 ids; - u32 mask; -}; - -/* - * struct pmx_mode: mode definition structure - * - * name: mode name - * mask: mode mask - */ -struct pmx_mode { - char *name; - u32 id; - u32 mask; -}; - -/* - * struct pmx_dev: device definition structure - * - * name: device name - * modes: device configuration array for different modes supported - * mode_count: size of modes array - * is_active: is peripheral active/enabled - * enb_on_reset: if 1, mask bits to be cleared in reg otherwise to be set in reg - */ -struct pmx_dev { - char *name; - struct pmx_dev_mode *modes; - u8 mode_count; - bool is_active; - bool enb_on_reset; -}; - -/* - * struct pmx_driver: driver definition structure - * - * mode: mode to be set - * devs: array of pointer to pmx devices - * devs_count: ARRAY_SIZE of devs - * base: base address of soc config registers - * mode_reg: structure of mode config register - * mux_reg: structure of device mux config register - */ -struct pmx_driver { - struct pmx_mode *mode; - struct pmx_dev **devs; - u8 devs_count; - u32 *base; - struct pmx_reg mode_reg; - struct pmx_reg mux_reg; -}; - -/* pmx functions */ -int pmx_register(struct pmx_driver *driver); - -#endif /* __PLAT_PADMUX_H */ diff --git a/arch/arm/plat-spear/padmux.c b/arch/arm/plat-spear/padmux.c deleted file mode 100644 index 555eec6dc1cb..000000000000 --- a/arch/arm/plat-spear/padmux.c +++ /dev/null @@ -1,164 +0,0 @@ -/* - * arch/arm/plat-spear/include/plat/padmux.c - * - * SPEAr platform specific gpio pads muxing source file - * - * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include -#include -#include -#include - -/* - * struct pmx: pmx definition structure - * - * base: base address of configuration registers - * mode_reg: mode configurations - * mux_reg: muxing configurations - * active_mode: pointer to current active mode - */ -struct pmx { - u32 base; - struct pmx_reg mode_reg; - struct pmx_reg mux_reg; - struct pmx_mode *active_mode; -}; - -static struct pmx *pmx; - -/** - * pmx_mode_set - Enables an multiplexing mode - * @mode - pointer to pmx mode - * - * It will set mode of operation in hardware. - * Returns -ve on Err otherwise 0 - */ -static int pmx_mode_set(struct pmx_mode *mode) -{ - u32 val; - - if (!mode->name) - return -EFAULT; - - pmx->active_mode = mode; - - val = readl(pmx->base + pmx->mode_reg.offset); - val &= ~pmx->mode_reg.mask; - val |= mode->mask & pmx->mode_reg.mask; - writel(val, pmx->base + pmx->mode_reg.offset); - - return 0; -} - -/** - * pmx_devs_enable - Enables list of devices - * @devs - pointer to pmx device array - * @count - number of devices to enable - * - * It will enable pads for all required peripherals once and only once. - * If peripheral is not supported by current mode then request is rejected. - * Conflicts between peripherals are not handled and peripherals will be - * enabled in the order they are present in pmx_dev array. - * In case of conflicts last peripheral enabled will be present. - * Returns -ve on Err otherwise 0 - */ -static int pmx_devs_enable(struct pmx_dev **devs, u8 count) -{ - u32 val, i, mask; - - if (!count) - return -EINVAL; - - val = readl(pmx->base + pmx->mux_reg.offset); - for (i = 0; i < count; i++) { - u8 j = 0; - - if (!devs[i]->name || !devs[i]->modes) { - printk(KERN_ERR "padmux: dev name or modes is null\n"); - continue; - } - /* check if peripheral exists in active mode */ - if (pmx->active_mode) { - bool found = false; - for (j = 0; j < devs[i]->mode_count; j++) { - if (devs[i]->modes[j].ids & - pmx->active_mode->id) { - found = true; - break; - } - } - if (found == false) { - printk(KERN_ERR "%s device not available in %s"\ - "mode\n", devs[i]->name, - pmx->active_mode->name); - continue; - } - } - - /* enable peripheral */ - mask = devs[i]->modes[j].mask & pmx->mux_reg.mask; - if (devs[i]->enb_on_reset) - val &= ~mask; - else - val |= mask; - - devs[i]->is_active = true; - } - writel(val, pmx->base + pmx->mux_reg.offset); - kfree(pmx); - - /* this will ensure that multiplexing can't be changed now */ - pmx = (struct pmx *)-1; - - return 0; -} - -/** - * pmx_register - registers a platform requesting pad mux feature - * @driver - pointer to driver structure containing driver specific parameters - * - * Also this must be called only once. This will allocate memory for pmx - * structure, will call pmx_mode_set, will call pmx_devs_enable. - * Returns -ve on Err otherwise 0 - */ -int pmx_register(struct pmx_driver *driver) -{ - int ret = 0; - - if (pmx) - return -EPERM; - if (!driver->base || !driver->devs) - return -EFAULT; - - pmx = kzalloc(sizeof(*pmx), GFP_KERNEL); - if (!pmx) - return -ENOMEM; - - pmx->base = (u32)driver->base; - pmx->mode_reg.offset = driver->mode_reg.offset; - pmx->mode_reg.mask = driver->mode_reg.mask; - pmx->mux_reg.offset = driver->mux_reg.offset; - pmx->mux_reg.mask = driver->mux_reg.mask; - - /* choose mode to enable */ - if (driver->mode) { - ret = pmx_mode_set(driver->mode); - if (ret) - goto pmx_fail; - } - ret = pmx_devs_enable(driver->devs, driver->devs_count); - if (ret) - goto pmx_fail; - - return 0; - -pmx_fail: - return ret; -} -- cgit v1.2.3 From e0373607855d033283b19014c8f14b90b3836924 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Thu, 29 Mar 2012 08:30:19 +0530 Subject: SPEAr3xx: Add pinctrl support for boards Signed-off-by: Viresh Kumar Acked-by: Linus Walleij Reviewed-by: Stephen Warren --- arch/arm/boot/dts/spear300-evb.dts | 38 ++++++++++++++++++++++++ arch/arm/boot/dts/spear300.dtsi | 5 ++++ arch/arm/boot/dts/spear310-evb.dts | 61 ++++++++++++++++++++++++++++++++++++++ arch/arm/boot/dts/spear310.dtsi | 5 ++++ arch/arm/boot/dts/spear320-evb.dts | 61 ++++++++++++++++++++++++++++++++++++++ arch/arm/boot/dts/spear320.dtsi | 7 ++++- arch/arm/mach-spear3xx/Kconfig | 3 ++ arch/arm/plat-spear/Kconfig | 1 + 8 files changed, 180 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/spear300-evb.dts b/arch/arm/boot/dts/spear300-evb.dts index eaecc29b9d81..402ca0d55011 100644 --- a/arch/arm/boot/dts/spear300-evb.dts +++ b/arch/arm/boot/dts/spear300-evb.dts @@ -25,6 +25,44 @@ }; ahb { + pinmux@99000000 { + st,pinmux-mode = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux { + i2c0 { + st,pins = "i2c0_grp"; + st,function = "i2c0"; + }; + ssp0 { + st,pins = "ssp0_grp"; + st,function = "ssp0"; + }; + mii0 { + st,pins = "mii0_grp"; + st,function = "mii0"; + }; + uart0 { + st,pins = "uart0_grp"; + st,function = "uart0"; + }; + clcd { + st,pins = "clcd_pfmode_grp"; + st,function = "clcd"; + }; + sdhci { + st,pins = "sdhci_4bit_grp"; + st,function = "sdhci"; + }; + gpio1 { + st,pins = "gpio1_4_to_7_grp", + "gpio1_0_to_3_grp"; + st,function = "gpio1"; + }; + }; + }; + clcd@60000000 { status = "okay"; }; diff --git a/arch/arm/boot/dts/spear300.dtsi b/arch/arm/boot/dts/spear300.dtsi index f9fcbf4f477b..01c5e358fdb2 100644 --- a/arch/arm/boot/dts/spear300.dtsi +++ b/arch/arm/boot/dts/spear300.dtsi @@ -21,6 +21,11 @@ ranges = <0x60000000 0x60000000 0x50000000 0xd0000000 0xd0000000 0x30000000>; + pinmux@99000000 { + compatible = "st,spear300-pinmux"; + reg = <0x99000000 0x1000>; + }; + clcd@60000000 { compatible = "arm,clcd-pl110", "arm,primecell"; reg = <0x60000000 0x1000>; diff --git a/arch/arm/boot/dts/spear310-evb.dts b/arch/arm/boot/dts/spear310-evb.dts index c86af33f700e..6d95317100ad 100644 --- a/arch/arm/boot/dts/spear310-evb.dts +++ b/arch/arm/boot/dts/spear310-evb.dts @@ -25,6 +25,67 @@ }; ahb { + pinmux@b4000000 { + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux { + gpio0 { + st,pins = "gpio0_pin0_grp", + "gpio0_pin1_grp", + "gpio0_pin2_grp", + "gpio0_pin3_grp", + "gpio0_pin4_grp", + "gpio0_pin5_grp"; + st,function = "gpio0"; + }; + i2c0 { + st,pins = "i2c0_grp"; + st,function = "i2c0"; + }; + mii0 { + st,pins = "mii0_grp"; + st,function = "mii0"; + }; + ssp0 { + st,pins = "ssp0_grp"; + st,function = "ssp0"; + }; + uart0 { + st,pins = "uart0_grp"; + st,function = "uart0"; + }; + emi { + st,pins = "emi_cs_0_to_5_grp"; + st,function = "emi"; + }; + fsmc { + st,pins = "fsmc_grp"; + st,function = "fsmc"; + }; + uart1 { + st,pins = "uart1_grp"; + st,function = "uart1"; + }; + uart2 { + st,pins = "uart2_grp"; + st,function = "uart2"; + }; + uart3 { + st,pins = "uart3_grp"; + st,function = "uart3"; + }; + uart4 { + st,pins = "uart4_grp"; + st,function = "uart4"; + }; + uart5 { + st,pins = "uart5_grp"; + st,function = "uart5"; + }; + }; + }; + dma@fc400000 { status = "okay"; }; diff --git a/arch/arm/boot/dts/spear310.dtsi b/arch/arm/boot/dts/spear310.dtsi index dc7fa14da846..e47081c494d9 100644 --- a/arch/arm/boot/dts/spear310.dtsi +++ b/arch/arm/boot/dts/spear310.dtsi @@ -22,6 +22,11 @@ 0xb0000000 0xb0000000 0x10000000 0xd0000000 0xd0000000 0x30000000>; + pinmux@b4000000 { + compatible = "st,spear310-pinmux"; + reg = <0xb4000000 0x1000>; + }; + fsmc: flash@44000000 { compatible = "st,spear600-fsmc-nand"; #address-cells = <1>; diff --git a/arch/arm/boot/dts/spear320-evb.dts b/arch/arm/boot/dts/spear320-evb.dts index d43de712e863..0c6463b71a37 100644 --- a/arch/arm/boot/dts/spear320-evb.dts +++ b/arch/arm/boot/dts/spear320-evb.dts @@ -25,6 +25,67 @@ }; ahb { + pinmux@b3000000 { + st,pinmux-mode = <3>; + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux { + i2c0 { + st,pins = "i2c0_grp"; + st,function = "i2c0"; + }; + mii0 { + st,pins = "mii0_grp"; + st,function = "mii0"; + }; + ssp0 { + st,pins = "ssp0_grp"; + st,function = "ssp0"; + }; + uart0 { + st,pins = "uart0_grp"; + st,function = "uart0"; + }; + sdhci { + st,pins = "sdhci_cd_51_grp"; + st,function = "sdhci"; + }; + i2s { + st,pins = "i2s_grp"; + st,function = "i2s"; + }; + uart1 { + st,pins = "uart1_grp"; + st,function = "uart1"; + }; + uart2 { + st,pins = "uart2_grp"; + st,function = "uart2"; + }; + can0 { + st,pins = "can0_grp"; + st,function = "can0"; + }; + can1 { + st,pins = "can1_grp"; + st,function = "can1"; + }; + mii2 { + st,pins = "mii2_grp"; + st,function = "mii2"; + }; + pwm0_1 { + st,pins = "pwm0_1_pin_14_15_grp"; + st,function = "pwm0_1"; + }; + pwm2 { + st,pins = "pwm2_pin_13_grp"; + st,function = "pwm2"; + }; + }; + }; + clcd@90000000 { status = "okay"; }; diff --git a/arch/arm/boot/dts/spear320.dtsi b/arch/arm/boot/dts/spear320.dtsi index 9a0267a5a0b7..5372ca399b1f 100644 --- a/arch/arm/boot/dts/spear320.dtsi +++ b/arch/arm/boot/dts/spear320.dtsi @@ -18,9 +18,14 @@ #address-cells = <1>; #size-cells = <1>; compatible = "simple-bus"; - ranges = <0x40000000 0x40000000 0x70000000 + ranges = <0x40000000 0x40000000 0x80000000 0xd0000000 0xd0000000 0x30000000>; + pinmux@b3000000 { + compatible = "st,spear320-pinmux"; + reg = <0xb3000000 0x1000>; + }; + clcd@90000000 { compatible = "arm,clcd-pl110", "arm,primecell"; reg = <0x90000000 0x1000>; diff --git a/arch/arm/mach-spear3xx/Kconfig b/arch/arm/mach-spear3xx/Kconfig index d9fe11cb6f16..8bd37291fa4f 100644 --- a/arch/arm/mach-spear3xx/Kconfig +++ b/arch/arm/mach-spear3xx/Kconfig @@ -7,16 +7,19 @@ if ARCH_SPEAR3XX menu "SPEAr3xx Implementations" config MACH_SPEAR300 bool "SPEAr300 Machine support with Device Tree" + select PINCTRL_SPEAR300 help Supports ST SPEAr300 machine configured via the device-tree config MACH_SPEAR310 bool "SPEAr310 Machine support with Device Tree" + select PINCTRL_SPEAR310 help Supports ST SPEAr310 machine configured via the device-tree config MACH_SPEAR320 bool "SPEAr320 Machine support with Device Tree" + select PINCTRL_SPEAR320 help Supports ST SPEAr320 machine configured via the device-tree endmenu diff --git a/arch/arm/plat-spear/Kconfig b/arch/arm/plat-spear/Kconfig index 6c066fcb2979..387655b5ce05 100644 --- a/arch/arm/plat-spear/Kconfig +++ b/arch/arm/plat-spear/Kconfig @@ -13,6 +13,7 @@ config ARCH_SPEAR3XX select ARM_VIC select CPU_ARM926T select USE_OF + select PINCTRL help Supports for ARM's SPEAR3XX family -- cgit v1.2.3 From 15f70e1b9a1a6351c252cb8892272cc4601818c7 Mon Sep 17 00:00:00 2001 From: John Crispin Date: Mon, 23 Apr 2012 19:01:58 +0200 Subject: pinctrl: fix signed vs unsigned conditionals inside pinmux_map_to_setting pinmux_map_to_setting() uses setting->data.mux.func/group to store the return code of pinmux_func_name_to_selector/pinctrl_get_group_selector(). However, struct pinctrl_setting_mux defines these elements as unsigned, resulting in all error codes getting lost. The conditionals following the assignments will always evaluate to false thus breaking the error paths. This bug can be triggered by loading a pinmux group map from the devicetree with an invalid function/group string. Signed-off-by: John Crispin Acked-by: Stephen Warren Acked-by: Dong Aisheng Signed-off-by: Linus Walleij --- drivers/pinctrl/pinmux.c | 15 ++++++++------- 1 file changed, 8 insertions(+), 7 deletions(-) diff --git a/drivers/pinctrl/pinmux.c b/drivers/pinctrl/pinmux.c index fa0357bd88ff..7cd0c7d0f2cf 100644 --- a/drivers/pinctrl/pinmux.c +++ b/drivers/pinctrl/pinmux.c @@ -329,10 +329,10 @@ int pinmux_map_to_setting(struct pinctrl_map const *map, return -EINVAL; } - setting->data.mux.func = - pinmux_func_name_to_selector(pctldev, map->data.mux.function); - if (setting->data.mux.func < 0) - return setting->data.mux.func; + ret = pinmux_func_name_to_selector(pctldev, map->data.mux.function); + if (ret < 0) + return ret; + setting->data.mux.func = ret; ret = pmxops->get_function_groups(pctldev, setting->data.mux.func, &groups, &num_groups); @@ -356,9 +356,10 @@ int pinmux_map_to_setting(struct pinctrl_map const *map, group = groups[0]; } - setting->data.mux.group = pinctrl_get_group_selector(pctldev, group); - if (setting->data.mux.group < 0) - return setting->data.mux.group; + ret = pinctrl_get_group_selector(pctldev, group); + if (ret < 0) + return ret; + setting->data.mux.group = ret; ret = pctlops->get_group_pins(pctldev, setting->data.mux.group, &pins, &num_pins); -- cgit v1.2.3 From 5654dc94f872f823aa13941a8fdba69a3feca39c Mon Sep 17 00:00:00 2001 From: Mike Turquette Date: Mon, 26 Mar 2012 11:51:34 -0700 Subject: clk: core: correct clk_set_rate kerneldoc Remove old and misleading documentation from the previous clk_set_rate implementaion. Reported-by: Shawn Guo Signed-off-by: Mike Turquette --- drivers/clk/clk.c | 41 +++++++++++------------------------------ 1 file changed, 11 insertions(+), 30 deletions(-) diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c index 9cf6f59e3e19..3ed36d3056de 100644 --- a/drivers/clk/clk.c +++ b/drivers/clk/clk.c @@ -859,38 +859,19 @@ static void clk_change_rate(struct clk *clk) * @clk: the clk whose rate is being changed * @rate: the new rate for clk * - * In the simplest case clk_set_rate will only change the rate of clk. + * In the simplest case clk_set_rate will only adjust the rate of clk. * - * If clk has the CLK_SET_RATE_GATE flag set and it is enabled this call - * will fail; only when the clk is disabled will it be able to change - * its rate. + * Setting the CLK_SET_RATE_PARENT flag allows the rate change operation to + * propagate up to clk's parent; whether or not this happens depends on the + * outcome of clk's .round_rate implementation. If *parent_rate is unchanged + * after calling .round_rate then upstream parent propagation is ignored. If + * *parent_rate comes back with a new rate for clk's parent then we propagate + * up to clk's parent and set it's rate. Upward propagation will continue + * until either a clk does not support the CLK_SET_RATE_PARENT flag or + * .round_rate stops requesting changes to clk's parent_rate. * - * Setting the CLK_SET_RATE_PARENT flag allows clk_set_rate to - * recursively propagate up to clk's parent; whether or not this happens - * depends on the outcome of clk's .round_rate implementation. If - * *parent_rate is 0 after calling .round_rate then upstream parent - * propagation is ignored. If *parent_rate comes back with a new rate - * for clk's parent then we propagate up to clk's parent and set it's - * rate. Upward propagation will continue until either a clk does not - * support the CLK_SET_RATE_PARENT flag or .round_rate stops requesting - * changes to clk's parent_rate. If there is a failure during upstream - * propagation then clk_set_rate will unwind and restore each clk's rate - * that had been successfully changed. Afterwards a rate change abort - * notification will be propagated downstream, starting from the clk - * that failed. - * - * At the end of all of the rate setting, clk_set_rate internally calls - * __clk_recalc_rates and propagates the rate changes downstream, - * starting from the highest clk whose rate was changed. This has the - * added benefit of propagating post-rate change notifiers. - * - * Note that while post-rate change and rate change abort notifications - * are guaranteed to be sent to a clk only once per call to - * clk_set_rate, pre-change notifications will be sent for every clk - * whose rate is changed. Stacking pre-change notifications is noisy - * for the drivers subscribed to them, but this allows drivers to react - * to intermediate clk rate changes up until the point where the final - * rate is achieved at the end of upstream propagation. + * Rate changes are accomplished via tree traversal that also recalculates the + * rates for the clocks and fires off POST_RATE_CHANGE notifiers. * * Returns 0 on success, -EERROR otherwise. */ -- cgit v1.2.3 From 70d347e6cd0d2a7ecc023b44ef721bc2c2a38f22 Mon Sep 17 00:00:00 2001 From: Mike Turquette Date: Mon, 26 Mar 2012 11:53:47 -0700 Subject: clk: core: remove dead code paths Some static inline dummy functions were left over from before the clock core was consolidated from several C files down to one. Remove them. Reported-by: Shawn Guo Signed-off-by: Mike Turquette --- drivers/clk/clk.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c index 3ed36d3056de..4daacf5783aa 100644 --- a/drivers/clk/clk.c +++ b/drivers/clk/clk.c @@ -194,7 +194,7 @@ static int __init clk_debug_init(void) late_initcall(clk_debug_init); #else static inline int clk_debug_register(struct clk *clk) { return 0; } -#endif /* CONFIG_COMMON_CLK_DEBUG */ +#endif #ifdef CONFIG_COMMON_CLK_DISABLE_UNUSED /* caller must hold prepare_lock */ @@ -246,9 +246,7 @@ static int clk_disable_unused(void) return 0; } late_initcall(clk_disable_unused); -#else -static inline int clk_disable_unused(struct clk *clk) { return 0; } -#endif /* CONFIG_COMMON_CLK_DISABLE_UNUSED */ +#endif /*** helper functions ***/ -- cgit v1.2.3 From 7452b2191cd55fb3fd6ad65344466ddcdbe4676e Mon Sep 17 00:00:00 2001 From: Mike Turquette Date: Mon, 26 Mar 2012 14:45:36 -0700 Subject: clk: core: clk_calc_new_rates handles NULL parents It is possible to call clk_set_rate on a clock with a NULL parent. One such example is an adjustable-rate root clock. Ensure that clk_calc_new_rates does not dereference parent without checking first and also handle the corner cases gracefully. Reported-by: Rajendra Nayak Signed-off-by: Mike Turquette --- drivers/clk/clk.c | 29 +++++++++++++++++++++-------- 1 file changed, 21 insertions(+), 8 deletions(-) diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c index 4daacf5783aa..d83a9e09e1bf 100644 --- a/drivers/clk/clk.c +++ b/drivers/clk/clk.c @@ -763,25 +763,38 @@ static void clk_calc_subtree(struct clk *clk, unsigned long new_rate) static struct clk *clk_calc_new_rates(struct clk *clk, unsigned long rate) { struct clk *top = clk; - unsigned long best_parent_rate = clk->parent->rate; + unsigned long best_parent_rate; unsigned long new_rate; - if (!clk->ops->round_rate && !(clk->flags & CLK_SET_RATE_PARENT)) { - clk->new_rate = clk->rate; + /* sanity */ + if (IS_ERR_OR_NULL(clk)) + return NULL; + + /* never propagate up to the parent */ + if (!(clk->flags & CLK_SET_RATE_PARENT)) { + if (!clk->ops->round_rate) { + clk->new_rate = clk->rate; + return NULL; + } else { + new_rate = clk->ops->round_rate(clk->hw, rate, NULL); + goto out; + } + } + + /* need clk->parent from here on out */ + if (!clk->parent) { + pr_debug("%s: %s has NULL parent\n", __func__, clk->name); return NULL; } - if (!clk->ops->round_rate && (clk->flags & CLK_SET_RATE_PARENT)) { + if (!clk->ops->round_rate) { top = clk_calc_new_rates(clk->parent, rate); new_rate = clk->new_rate = clk->parent->new_rate; goto out; } - if (clk->flags & CLK_SET_RATE_PARENT) - new_rate = clk->ops->round_rate(clk->hw, rate, &best_parent_rate); - else - new_rate = clk->ops->round_rate(clk->hw, rate, NULL); + new_rate = clk->ops->round_rate(clk->hw, rate, &best_parent_rate); if (best_parent_rate != clk->parent->rate) { top = clk_calc_new_rates(clk->parent, best_parent_rate); -- cgit v1.2.3 From d4d7e3ddc76c5ae3b4fbd15cb6f30aa78c28d788 Mon Sep 17 00:00:00 2001 From: Mike Turquette Date: Mon, 26 Mar 2012 16:15:52 -0700 Subject: clk: core: enforce clk_ops consistency Documentation/clk.txt has some handsome ASCII art outlining which clk_ops are mandatory for a given clock, given the capability of the hardware. Enforce those mandates with sanity checks in __clk_init. Signed-off-by: Mike Turquette --- drivers/clk/clk.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c index d83a9e09e1bf..9924aec17aad 100644 --- a/drivers/clk/clk.c +++ b/drivers/clk/clk.c @@ -1202,6 +1202,20 @@ void __clk_init(struct device *dev, struct clk *clk) if (__clk_lookup(clk->name)) goto out; + /* check that clk_ops are sane. See Documentation/clk.txt */ + if (clk->ops->set_rate && + !(clk->ops->round_rate && clk->ops->recalc_rate)) { + pr_warning("%s: %s must implement .round_rate & .recalc_rate\n", + __func__, clk->name); + goto out; + } + + if (clk->ops->set_parent && !clk->ops->get_parent) { + pr_warning("%s: %s must implement .get_parent & .set_parent\n", + __func__, clk->name); + goto out; + } + /* throw a WARN if any entries in parent_names are NULL */ for (i = 0; i < clk->num_parents; i++) WARN(!clk->parent_names[i], -- cgit v1.2.3 From 10363b5838b4d5dcbf01db219f35e91aa94f24c6 Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Tue, 27 Mar 2012 15:23:20 +0800 Subject: clk: use kzalloc in clk_register_mux Change clk_register_mux to use kzalloc, just like what all other basic clk registration functions do. Signed-off-by: Shawn Guo Signed-off-by: Mike Turquette --- drivers/clk/clk-mux.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/clk/clk-mux.c b/drivers/clk/clk-mux.c index c71ad1f41a97..50e05953c8d3 100644 --- a/drivers/clk/clk-mux.c +++ b/drivers/clk/clk-mux.c @@ -97,7 +97,7 @@ struct clk *clk_register_mux(struct device *dev, const char *name, { struct clk_mux *mux; - mux = kmalloc(sizeof(struct clk_mux), GFP_KERNEL); + mux = kzalloc(sizeof(struct clk_mux), GFP_KERNEL); if (!mux) { pr_err("%s: could not allocate mux clk\n", __func__); -- cgit v1.2.3 From c0d2530c03cbf3741cb7a0f8ebae93e7a563fc58 Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Tue, 27 Mar 2012 15:23:21 +0800 Subject: clk: remove unnecessary EXPORT_SYMBOL_GPL It makes no sense to have EXPORT_SYMBOL_GPL on static functions. Signed-off-by: Shawn Guo Signed-off-by: Mike Turquette --- drivers/clk/clk-divider.c | 3 --- drivers/clk/clk-fixed-rate.c | 1 - drivers/clk/clk-gate.c | 3 --- drivers/clk/clk-mux.c | 2 -- 4 files changed, 9 deletions(-) diff --git a/drivers/clk/clk-divider.c b/drivers/clk/clk-divider.c index d5ac6a75ea57..231cd6e89003 100644 --- a/drivers/clk/clk-divider.c +++ b/drivers/clk/clk-divider.c @@ -45,7 +45,6 @@ static unsigned long clk_divider_recalc_rate(struct clk_hw *hw, return parent_rate / div; } -EXPORT_SYMBOL_GPL(clk_divider_recalc_rate); /* * The reverse of DIV_ROUND_UP: The maximum number which @@ -117,7 +116,6 @@ static long clk_divider_round_rate(struct clk_hw *hw, unsigned long rate, return r / div; } } -EXPORT_SYMBOL_GPL(clk_divider_round_rate); static int clk_divider_set_rate(struct clk_hw *hw, unsigned long rate) { @@ -147,7 +145,6 @@ static int clk_divider_set_rate(struct clk_hw *hw, unsigned long rate) return 0; } -EXPORT_SYMBOL_GPL(clk_divider_set_rate); struct clk_ops clk_divider_ops = { .recalc_rate = clk_divider_recalc_rate, diff --git a/drivers/clk/clk-fixed-rate.c b/drivers/clk/clk-fixed-rate.c index 90c79fb5d1bd..651b06f49e15 100644 --- a/drivers/clk/clk-fixed-rate.c +++ b/drivers/clk/clk-fixed-rate.c @@ -32,7 +32,6 @@ static unsigned long clk_fixed_rate_recalc_rate(struct clk_hw *hw, { return to_clk_fixed_rate(hw)->fixed_rate; } -EXPORT_SYMBOL_GPL(clk_fixed_rate_recalc_rate); struct clk_ops clk_fixed_rate_ops = { .recalc_rate = clk_fixed_rate_recalc_rate, diff --git a/drivers/clk/clk-gate.c b/drivers/clk/clk-gate.c index b5902e2ef2fd..b688f4775859 100644 --- a/drivers/clk/clk-gate.c +++ b/drivers/clk/clk-gate.c @@ -71,7 +71,6 @@ static int clk_gate_enable(struct clk_hw *hw) return 0; } -EXPORT_SYMBOL_GPL(clk_gate_enable); static void clk_gate_disable(struct clk_hw *hw) { @@ -82,7 +81,6 @@ static void clk_gate_disable(struct clk_hw *hw) else clk_gate_clear_bit(gate); } -EXPORT_SYMBOL_GPL(clk_gate_disable); static int clk_gate_is_enabled(struct clk_hw *hw) { @@ -99,7 +97,6 @@ static int clk_gate_is_enabled(struct clk_hw *hw) return reg ? 1 : 0; } -EXPORT_SYMBOL_GPL(clk_gate_is_enabled); struct clk_ops clk_gate_ops = { .enable = clk_gate_enable, diff --git a/drivers/clk/clk-mux.c b/drivers/clk/clk-mux.c index 50e05953c8d3..45cad61600c9 100644 --- a/drivers/clk/clk-mux.c +++ b/drivers/clk/clk-mux.c @@ -55,7 +55,6 @@ static u8 clk_mux_get_parent(struct clk_hw *hw) return val; } -EXPORT_SYMBOL_GPL(clk_mux_get_parent); static int clk_mux_set_parent(struct clk_hw *hw, u8 index) { @@ -82,7 +81,6 @@ static int clk_mux_set_parent(struct clk_hw *hw, u8 index) return 0; } -EXPORT_SYMBOL_GPL(clk_mux_set_parent); struct clk_ops clk_mux_ops = { .get_parent = clk_mux_get_parent, -- cgit v1.2.3 From 822c250e154cd44cf60a4f0d647aa70abea09520 Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Tue, 27 Mar 2012 15:23:22 +0800 Subject: clk: add "const" for clk_ops of basic clks The clk_ops of basic clks should have "const" to match the definition in "struct clk" and clk_register prototype. Signed-off-by: Shawn Guo Signed-off-by: Mike Turquette --- drivers/clk/clk-divider.c | 2 +- drivers/clk/clk-fixed-rate.c | 2 +- drivers/clk/clk-gate.c | 2 +- drivers/clk/clk-mux.c | 2 +- include/linux/clk-private.h | 8 ++++---- 5 files changed, 8 insertions(+), 8 deletions(-) diff --git a/drivers/clk/clk-divider.c b/drivers/clk/clk-divider.c index 231cd6e89003..b1c4b02aaaf1 100644 --- a/drivers/clk/clk-divider.c +++ b/drivers/clk/clk-divider.c @@ -146,7 +146,7 @@ static int clk_divider_set_rate(struct clk_hw *hw, unsigned long rate) return 0; } -struct clk_ops clk_divider_ops = { +const struct clk_ops clk_divider_ops = { .recalc_rate = clk_divider_recalc_rate, .round_rate = clk_divider_round_rate, .set_rate = clk_divider_set_rate, diff --git a/drivers/clk/clk-fixed-rate.c b/drivers/clk/clk-fixed-rate.c index 651b06f49e15..027e47704de9 100644 --- a/drivers/clk/clk-fixed-rate.c +++ b/drivers/clk/clk-fixed-rate.c @@ -33,7 +33,7 @@ static unsigned long clk_fixed_rate_recalc_rate(struct clk_hw *hw, return to_clk_fixed_rate(hw)->fixed_rate; } -struct clk_ops clk_fixed_rate_ops = { +const struct clk_ops clk_fixed_rate_ops = { .recalc_rate = clk_fixed_rate_recalc_rate, }; EXPORT_SYMBOL_GPL(clk_fixed_rate_ops); diff --git a/drivers/clk/clk-gate.c b/drivers/clk/clk-gate.c index b688f4775859..fe2ff9e774c2 100644 --- a/drivers/clk/clk-gate.c +++ b/drivers/clk/clk-gate.c @@ -98,7 +98,7 @@ static int clk_gate_is_enabled(struct clk_hw *hw) return reg ? 1 : 0; } -struct clk_ops clk_gate_ops = { +const struct clk_ops clk_gate_ops = { .enable = clk_gate_enable, .disable = clk_gate_disable, .is_enabled = clk_gate_is_enabled, diff --git a/drivers/clk/clk-mux.c b/drivers/clk/clk-mux.c index 45cad61600c9..54244889a948 100644 --- a/drivers/clk/clk-mux.c +++ b/drivers/clk/clk-mux.c @@ -82,7 +82,7 @@ static int clk_mux_set_parent(struct clk_hw *hw, u8 index) return 0; } -struct clk_ops clk_mux_ops = { +const struct clk_ops clk_mux_ops = { .get_parent = clk_mux_get_parent, .set_parent = clk_mux_set_parent, }; diff --git a/include/linux/clk-private.h b/include/linux/clk-private.h index 5e4312b6f5cc..5f4ccd7cd761 100644 --- a/include/linux/clk-private.h +++ b/include/linux/clk-private.h @@ -55,7 +55,7 @@ struct clk { * alternative macro for static initialization */ -extern struct clk_ops clk_fixed_rate_ops; +extern const struct clk_ops clk_fixed_rate_ops; #define DEFINE_CLK_FIXED_RATE(_name, _flags, _rate, \ _fixed_rate_flags) \ @@ -78,7 +78,7 @@ extern struct clk_ops clk_fixed_rate_ops; .flags = _flags, \ }; -extern struct clk_ops clk_gate_ops; +extern const struct clk_ops clk_gate_ops; #define DEFINE_CLK_GATE(_name, _parent_name, _parent_ptr, \ _flags, _reg, _bit_idx, \ @@ -110,7 +110,7 @@ extern struct clk_ops clk_gate_ops; .flags = _flags, \ }; -extern struct clk_ops clk_divider_ops; +extern const struct clk_ops clk_divider_ops; #define DEFINE_CLK_DIVIDER(_name, _parent_name, _parent_ptr, \ _flags, _reg, _shift, _width, \ @@ -143,7 +143,7 @@ extern struct clk_ops clk_divider_ops; .flags = _flags, \ }; -extern struct clk_ops clk_mux_ops; +extern const struct clk_ops clk_mux_ops; #define DEFINE_CLK_MUX(_name, _parent_names, _parents, _flags, \ _reg, _shift, _width, \ -- cgit v1.2.3 From bffad66e31fe9d94cd096f2e4de7c683e1ae32ef Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Tue, 27 Mar 2012 15:23:23 +0800 Subject: clk: declare clk_ops of basic clks in clk-provider.h Besides the static initialization, the clk_ops of basic clks could also be used by particular clk type being subclass of the basic clks. For example, clk_busy_divider has the same clk_ops as clk_divider, except it has to wait for a busy bit before return success with .set_rate. clk_busy_divider will somehow reuse clk_ops of clk_divider. Since clk-provider.h is included by clk-private.h, it's safe to move those clk_ops declaration of basic clks form clk-private.h into clk-provider.h, so that implementation of clks like clk_busy_divider above do not need to include clk-private.h to access those clk_ops. Signed-off-by: Shawn Guo Signed-off-by: Mike Turquette --- include/linux/clk-private.h | 8 -------- include/linux/clk-provider.h | 4 ++++ 2 files changed, 4 insertions(+), 8 deletions(-) diff --git a/include/linux/clk-private.h b/include/linux/clk-private.h index 5f4ccd7cd761..f19fee0190cb 100644 --- a/include/linux/clk-private.h +++ b/include/linux/clk-private.h @@ -55,8 +55,6 @@ struct clk { * alternative macro for static initialization */ -extern const struct clk_ops clk_fixed_rate_ops; - #define DEFINE_CLK_FIXED_RATE(_name, _flags, _rate, \ _fixed_rate_flags) \ static struct clk _name; \ @@ -78,8 +76,6 @@ extern const struct clk_ops clk_fixed_rate_ops; .flags = _flags, \ }; -extern const struct clk_ops clk_gate_ops; - #define DEFINE_CLK_GATE(_name, _parent_name, _parent_ptr, \ _flags, _reg, _bit_idx, \ _gate_flags, _lock) \ @@ -110,8 +106,6 @@ extern const struct clk_ops clk_gate_ops; .flags = _flags, \ }; -extern const struct clk_ops clk_divider_ops; - #define DEFINE_CLK_DIVIDER(_name, _parent_name, _parent_ptr, \ _flags, _reg, _shift, _width, \ _divider_flags, _lock) \ @@ -143,8 +137,6 @@ extern const struct clk_ops clk_divider_ops; .flags = _flags, \ }; -extern const struct clk_ops clk_mux_ops; - #define DEFINE_CLK_MUX(_name, _parent_names, _parents, _flags, \ _reg, _shift, _width, \ _mux_flags, _lock) \ diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h index 5508897ad376..6eb8e5da788e 100644 --- a/include/linux/clk-provider.h +++ b/include/linux/clk-provider.h @@ -149,6 +149,7 @@ struct clk_fixed_rate { u8 flags; }; +extern const struct clk_ops clk_fixed_rate_ops; struct clk *clk_register_fixed_rate(struct device *dev, const char *name, const char *parent_name, unsigned long flags, unsigned long fixed_rate); @@ -180,6 +181,7 @@ struct clk_gate { #define CLK_GATE_SET_TO_DISABLE BIT(0) +extern const struct clk_ops clk_gate_ops; struct clk *clk_register_gate(struct device *dev, const char *name, const char *parent_name, unsigned long flags, void __iomem *reg, u8 bit_idx, @@ -218,6 +220,7 @@ struct clk_divider { #define CLK_DIVIDER_ONE_BASED BIT(0) #define CLK_DIVIDER_POWER_OF_TWO BIT(1) +extern const struct clk_ops clk_divider_ops; struct clk *clk_register_divider(struct device *dev, const char *name, const char *parent_name, unsigned long flags, void __iomem *reg, u8 shift, u8 width, @@ -252,6 +255,7 @@ struct clk_mux { #define CLK_MUX_INDEX_ONE BIT(0) #define CLK_MUX_INDEX_BIT BIT(1) +extern const struct clk_ops clk_mux_ops; struct clk *clk_register_mux(struct device *dev, const char *name, char **parent_names, u8 num_parents, unsigned long flags, void __iomem *reg, u8 shift, u8 width, -- cgit v1.2.3 From 34e44fe87437b6a5aad856f15f7a849e5fc137aa Mon Sep 17 00:00:00 2001 From: Rajendra Nayak Date: Mon, 26 Mar 2012 19:01:48 +0530 Subject: clk: Make clk_get_rate() return 0 on error Most users of clk_get_rate() actually assume a non zero return value as a valid rate returned. Returing -EINVAL might confuse such users, so make it instead return zero on error. Besides the return value of clk_get_rate seems to be 'unsigned long'. Signed-off-by: Rajendra nayak Signed-off-by: Mike Turquette --- drivers/clk/clk.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c index 9924aec17aad..a24b121747ac 100644 --- a/drivers/clk/clk.c +++ b/drivers/clk/clk.c @@ -285,7 +285,7 @@ unsigned long __clk_get_rate(struct clk *clk) unsigned long ret; if (!clk) { - ret = -EINVAL; + ret = 0; goto out; } @@ -295,7 +295,7 @@ unsigned long __clk_get_rate(struct clk *clk) goto out; if (!clk->parent) - ret = -ENODEV; + ret = 0; out: return ret; @@ -560,7 +560,7 @@ EXPORT_SYMBOL_GPL(clk_enable); * @clk: the clk whose rate is being returned * * Simply returns the cached rate of the clk. Does not query the hardware. If - * clk is NULL then returns -EINVAL. + * clk is NULL then returns 0. */ unsigned long clk_get_rate(struct clk *clk) { -- cgit v1.2.3 From 7e87aed965fa7a642fc299af96d370dad7b5b814 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Sun, 1 Apr 2012 15:31:23 +0100 Subject: clk: Remove comment for end of CONFIG_COMMON_CLK section The comment is inaccurate (it actually ends the CONFIG_COMMON_CLK section, there's no else) and given that we've just got a single level of ifdef isn't really needed anyway. Signed-off-by: Mark Brown Signed-off-by: Mike Turquette --- include/linux/clk.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/linux/clk.h b/include/linux/clk.h index b0252726df61..c9547d99e52c 100644 --- a/include/linux/clk.h +++ b/include/linux/clk.h @@ -81,7 +81,7 @@ int clk_notifier_register(struct clk *clk, struct notifier_block *nb); int clk_notifier_unregister(struct clk *clk, struct notifier_block *nb); -#endif /* !CONFIG_COMMON_CLK */ +#endif /** * clk_get - lookup and obtain a reference to a clock producer. -- cgit v1.2.3 From d305fb78f31209596c9135d396a0d3af7ac86947 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Wed, 21 Mar 2012 20:01:20 +0000 Subject: clk: Constify parent name arrays Drivers should be able to declare their arrays of parent names as const so the APIs need to accept const arguments. Signed-off-by: Mark Brown [mturquette@linaro.org: constified gate] Signed-off-by: Mike Turquette --- drivers/clk/clk-mux.c | 2 +- drivers/clk/clk.c | 2 +- include/linux/clk-private.h | 2 +- include/linux/clk-provider.h | 8 ++++---- 4 files changed, 7 insertions(+), 7 deletions(-) diff --git a/drivers/clk/clk-mux.c b/drivers/clk/clk-mux.c index 54244889a948..bd5e598b9f1e 100644 --- a/drivers/clk/clk-mux.c +++ b/drivers/clk/clk-mux.c @@ -89,7 +89,7 @@ const struct clk_ops clk_mux_ops = { EXPORT_SYMBOL_GPL(clk_mux_ops); struct clk *clk_register_mux(struct device *dev, const char *name, - char **parent_names, u8 num_parents, unsigned long flags, + const char **parent_names, u8 num_parents, unsigned long flags, void __iomem *reg, u8 shift, u8 width, u8 clk_mux_flags, spinlock_t *lock) { diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c index a24b121747ac..ddade8759ea9 100644 --- a/drivers/clk/clk.c +++ b/drivers/clk/clk.c @@ -1328,7 +1328,7 @@ out: */ struct clk *clk_register(struct device *dev, const char *name, const struct clk_ops *ops, struct clk_hw *hw, - char **parent_names, u8 num_parents, unsigned long flags) + const char **parent_names, u8 num_parents, unsigned long flags) { struct clk *clk; diff --git a/include/linux/clk-private.h b/include/linux/clk-private.h index f19fee0190cb..e9c8b9841b16 100644 --- a/include/linux/clk-private.h +++ b/include/linux/clk-private.h @@ -30,7 +30,7 @@ struct clk { const struct clk_ops *ops; struct clk_hw *hw; struct clk *parent; - char **parent_names; + const char **parent_names; struct clk **parents; u8 num_parents; unsigned long rate; diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h index 6eb8e5da788e..8981435f9064 100644 --- a/include/linux/clk-provider.h +++ b/include/linux/clk-provider.h @@ -176,7 +176,7 @@ struct clk_gate { u8 bit_idx; u8 flags; spinlock_t *lock; - char *parent[1]; + const char *parent[1]; }; #define CLK_GATE_SET_TO_DISABLE BIT(0) @@ -214,7 +214,7 @@ struct clk_divider { u8 width; u8 flags; spinlock_t *lock; - char *parent[1]; + const char *parent[1]; }; #define CLK_DIVIDER_ONE_BASED BIT(0) @@ -257,7 +257,7 @@ struct clk_mux { extern const struct clk_ops clk_mux_ops; struct clk *clk_register_mux(struct device *dev, const char *name, - char **parent_names, u8 num_parents, unsigned long flags, + const char **parent_names, u8 num_parents, unsigned long flags, void __iomem *reg, u8 shift, u8 width, u8 clk_mux_flags, spinlock_t *lock); @@ -278,7 +278,7 @@ struct clk *clk_register_mux(struct device *dev, const char *name, */ struct clk *clk_register(struct device *dev, const char *name, const struct clk_ops *ops, struct clk_hw *hw, - char **parent_names, u8 num_parents, unsigned long flags); + const char **parent_names, u8 num_parents, unsigned long flags); /* helper functions */ const char *__clk_get_name(struct clk *clk); -- cgit v1.2.3 From d1302a36a7f1c33d1a8babc6a510e1401a5e5aed Mon Sep 17 00:00:00 2001 From: Mike Turquette Date: Thu, 29 Mar 2012 14:30:40 -0700 Subject: clk: core: copy parent_names & return error codes This patch cleans up clk_register and solves a few bugs by teaching clk_register and __clk_init to return error codes (instead of just NULL) to better align with the existing clk.h api. Along with that change this patch also introduces a new behavior whereby clk_register copies the parent_names array, thus allowing platforms to declare their parent_names arrays as __initdata. Signed-off-by: Mike Turquette --- drivers/clk/clk.c | 65 ++++++++++++++++++++++++++++++++++++-------- include/linux/clk-private.h | 4 ++- include/linux/clk-provider.h | 3 +- 3 files changed, 58 insertions(+), 14 deletions(-) diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c index ddade8759ea9..8f7c3849c8f6 100644 --- a/drivers/clk/clk.c +++ b/drivers/clk/clk.c @@ -1185,34 +1185,41 @@ EXPORT_SYMBOL_GPL(clk_set_parent); * very large numbers of clocks that need to be statically initialized. It is * a layering violation to include clk-private.h from any code which implements * a clock's .ops; as such any statically initialized clock data MUST be in a - * separate C file from the logic that implements it's operations. + * separate C file from the logic that implements it's operations. Returns 0 + * on success, otherwise an error code. */ -void __clk_init(struct device *dev, struct clk *clk) +int __clk_init(struct device *dev, struct clk *clk) { - int i; + int i, ret = 0; struct clk *orphan; struct hlist_node *tmp, *tmp2; if (!clk) - return; + return -EINVAL; mutex_lock(&prepare_lock); /* check to see if a clock with this name is already registered */ - if (__clk_lookup(clk->name)) + if (__clk_lookup(clk->name)) { + pr_debug("%s: clk %s already initialized\n", + __func__, clk->name); + ret = -EEXIST; goto out; + } /* check that clk_ops are sane. See Documentation/clk.txt */ if (clk->ops->set_rate && !(clk->ops->round_rate && clk->ops->recalc_rate)) { pr_warning("%s: %s must implement .round_rate & .recalc_rate\n", __func__, clk->name); + ret = -EINVAL; goto out; } if (clk->ops->set_parent && !clk->ops->get_parent) { pr_warning("%s: %s must implement .get_parent & .set_parent\n", __func__, clk->name); + ret = -EINVAL; goto out; } @@ -1308,7 +1315,7 @@ void __clk_init(struct device *dev, struct clk *clk) out: mutex_unlock(&prepare_lock); - return; + return ret; } /** @@ -1324,29 +1331,63 @@ out: * clk_register is the primary interface for populating the clock tree with new * clock nodes. It returns a pointer to the newly allocated struct clk which * cannot be dereferenced by driver code but may be used in conjuction with the - * rest of the clock API. + * rest of the clock API. In the event of an error clk_register will return an + * error code; drivers must test for an error code after calling clk_register. */ struct clk *clk_register(struct device *dev, const char *name, const struct clk_ops *ops, struct clk_hw *hw, const char **parent_names, u8 num_parents, unsigned long flags) { + int i, ret; struct clk *clk; clk = kzalloc(sizeof(*clk), GFP_KERNEL); - if (!clk) - return NULL; + if (!clk) { + pr_err("%s: could not allocate clk\n", __func__); + ret = -ENOMEM; + goto fail_out; + } clk->name = name; clk->ops = ops; clk->hw = hw; clk->flags = flags; - clk->parent_names = parent_names; clk->num_parents = num_parents; hw->clk = clk; - __clk_init(dev, clk); + /* allocate local copy in case parent_names is __initdata */ + clk->parent_names = kzalloc((sizeof(char*) * num_parents), + GFP_KERNEL); + + if (!clk->parent_names) { + pr_err("%s: could not allocate clk->parent_names\n", __func__); + ret = -ENOMEM; + goto fail_parent_names; + } + + + /* copy each string name in case parent_names is __initdata */ + for (i = 0; i < num_parents; i++) { + clk->parent_names[i] = kstrdup(parent_names[i], GFP_KERNEL); + if (!clk->parent_names[i]) { + pr_err("%s: could not copy parent_names\n", __func__); + ret = -ENOMEM; + goto fail_parent_names_copy; + } + } + + ret = __clk_init(dev, clk); + if (!ret) + return clk; - return clk; +fail_parent_names_copy: + while (--i >= 0) + kfree(clk->parent_names[i]); + kfree(clk->parent_names); +fail_parent_names: + kfree(clk); +fail_out: + return ERR_PTR(ret); } EXPORT_SYMBOL_GPL(clk_register); diff --git a/include/linux/clk-private.h b/include/linux/clk-private.h index e9c8b9841b16..e7032fdd45eb 100644 --- a/include/linux/clk-private.h +++ b/include/linux/clk-private.h @@ -181,8 +181,10 @@ struct clk { * * It is not necessary to call clk_register if __clk_init is used directly with * statically initialized clock data. + * + * Returns 0 on success, otherwise an error code. */ -void __clk_init(struct device *dev, struct clk *clk); +int __clk_init(struct device *dev, struct clk *clk); #endif /* CONFIG_COMMON_CLK */ #endif /* CLK_PRIVATE_H */ diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h index 8981435f9064..97f9fabf3be2 100644 --- a/include/linux/clk-provider.h +++ b/include/linux/clk-provider.h @@ -274,7 +274,8 @@ struct clk *clk_register_mux(struct device *dev, const char *name, * clk_register is the primary interface for populating the clock tree with new * clock nodes. It returns a pointer to the newly allocated struct clk which * cannot be dereferenced by driver code but may be used in conjuction with the - * rest of the clock API. + * rest of the clock API. In the event of an error clk_register will return an + * error code; drivers must test for an error code after calling clk_register. */ struct clk *clk_register(struct device *dev, const char *name, const struct clk_ops *ops, struct clk_hw *hw, -- cgit v1.2.3 From 27d545915fd49cbe18a3877d82359896e9851efb Mon Sep 17 00:00:00 2001 From: Mike Turquette Date: Mon, 26 Mar 2012 17:51:03 -0700 Subject: clk: basic: improve parent_names & return errors This patch is the basic clk version of 'clk: core: copy parent_names & return error codes'. The registration functions are changed to allow the core code to copy the array of strings and allow platforms to declare those arrays as __initdata. This patch also converts all of the basic clk registration functions to return error codes which better aligns them with the existing clk.h api. Signed-off-by: Mike Turquette --- drivers/clk/clk-divider.c | 34 +++++++++++++++++++--------------- drivers/clk/clk-fixed-rate.c | 40 ++++++++++++++++++---------------------- drivers/clk/clk-gate.c | 34 +++++++++++++++++++--------------- drivers/clk/clk-mux.c | 10 ++++++++-- include/linux/clk-provider.h | 2 -- 5 files changed, 64 insertions(+), 56 deletions(-) diff --git a/drivers/clk/clk-divider.c b/drivers/clk/clk-divider.c index b1c4b02aaaf1..5fc541d017f1 100644 --- a/drivers/clk/clk-divider.c +++ b/drivers/clk/clk-divider.c @@ -153,6 +153,18 @@ const struct clk_ops clk_divider_ops = { }; EXPORT_SYMBOL_GPL(clk_divider_ops); +/** + * clk_register_divider - register a divider clock with the clock framework + * @dev: device registering this clock + * @name: name of this clock + * @parent_name: name of clock's parent + * @flags: framework-specific flags + * @reg: register address to adjust divider + * @shift: number of bits to shift the bitfield + * @width: width of the bitfield + * @clk_divider_flags: divider-specific flags for this clock + * @lock: shared register lock for this clock + */ struct clk *clk_register_divider(struct device *dev, const char *name, const char *parent_name, unsigned long flags, void __iomem *reg, u8 shift, u8 width, @@ -161,11 +173,11 @@ struct clk *clk_register_divider(struct device *dev, const char *name, struct clk_divider *div; struct clk *clk; + /* allocate the divider */ div = kzalloc(sizeof(struct clk_divider), GFP_KERNEL); - if (!div) { pr_err("%s: could not allocate divider clk\n", __func__); - return NULL; + return ERR_PTR(-ENOMEM); } /* struct clk_divider assignments */ @@ -175,23 +187,15 @@ struct clk *clk_register_divider(struct device *dev, const char *name, div->flags = clk_divider_flags; div->lock = lock; - if (parent_name) { - div->parent[0] = kstrdup(parent_name, GFP_KERNEL); - if (!div->parent[0]) - goto out; - } - + /* register the clock */ clk = clk_register(dev, name, &clk_divider_ops, &div->hw, - div->parent, + (parent_name ? &parent_name: NULL), (parent_name ? 1 : 0), flags); - if (clk) - return clk; -out: - kfree(div->parent[0]); - kfree(div); + if (IS_ERR(clk)) + kfree(div); - return NULL; + return clk; } diff --git a/drivers/clk/clk-fixed-rate.c b/drivers/clk/clk-fixed-rate.c index 027e47704de9..b555a04c8df8 100644 --- a/drivers/clk/clk-fixed-rate.c +++ b/drivers/clk/clk-fixed-rate.c @@ -38,16 +38,23 @@ const struct clk_ops clk_fixed_rate_ops = { }; EXPORT_SYMBOL_GPL(clk_fixed_rate_ops); +/** + * clk_register_fixed_rate - register fixed-rate clock with the clock framework + * @dev: device that is registering this clock + * @name: name of this clock + * @parent_name: name of clock's parent + * @flags: framework-specific flags + * @fixed_rate: non-adjustable clock rate + */ struct clk *clk_register_fixed_rate(struct device *dev, const char *name, const char *parent_name, unsigned long flags, unsigned long fixed_rate) { struct clk_fixed_rate *fixed; - char **parent_names = NULL; - u8 len; + struct clk *clk; + /* allocate fixed-rate clock */ fixed = kzalloc(sizeof(struct clk_fixed_rate), GFP_KERNEL); - if (!fixed) { pr_err("%s: could not allocate fixed clk\n", __func__); return ERR_PTR(-ENOMEM); @@ -56,26 +63,15 @@ struct clk *clk_register_fixed_rate(struct device *dev, const char *name, /* struct clk_fixed_rate assignments */ fixed->fixed_rate = fixed_rate; - if (parent_name) { - parent_names = kmalloc(sizeof(char *), GFP_KERNEL); - - if (! parent_names) - goto out; - - len = sizeof(char) * strlen(parent_name); - - parent_names[0] = kmalloc(len, GFP_KERNEL); - - if (!parent_names[0]) - goto out; - - strncpy(parent_names[0], parent_name, len); - } - -out: - return clk_register(dev, name, + /* register the clock */ + clk = clk_register(dev, name, &clk_fixed_rate_ops, &fixed->hw, - parent_names, + (parent_name ? &parent_name : NULL), (parent_name ? 1 : 0), flags); + + if (IS_ERR(clk)) + kfree(fixed); + + return clk; } diff --git a/drivers/clk/clk-gate.c b/drivers/clk/clk-gate.c index fe2ff9e774c2..42a4b941b6e7 100644 --- a/drivers/clk/clk-gate.c +++ b/drivers/clk/clk-gate.c @@ -105,6 +105,17 @@ const struct clk_ops clk_gate_ops = { }; EXPORT_SYMBOL_GPL(clk_gate_ops); +/** + * clk_register_gate - register a gate clock with the clock framework + * @dev: device that is registering this clock + * @name: name of this clock + * @parent_name: name of this clock's parent + * @flags: framework-specific flags for this clock + * @reg: register address to control gating of this clock + * @bit_idx: which bit in the register controls gating of this clock + * @clk_gate_flags: gate-specific flags for this clock + * @lock: shared register lock for this clock + */ struct clk *clk_register_gate(struct device *dev, const char *name, const char *parent_name, unsigned long flags, void __iomem *reg, u8 bit_idx, @@ -113,11 +124,11 @@ struct clk *clk_register_gate(struct device *dev, const char *name, struct clk_gate *gate; struct clk *clk; + /* allocate the gate */ gate = kzalloc(sizeof(struct clk_gate), GFP_KERNEL); - if (!gate) { pr_err("%s: could not allocate gated clk\n", __func__); - return NULL; + return ERR_PTR(-ENOMEM); } /* struct clk_gate assignments */ @@ -126,22 +137,15 @@ struct clk *clk_register_gate(struct device *dev, const char *name, gate->flags = clk_gate_flags; gate->lock = lock; - if (parent_name) { - gate->parent[0] = kstrdup(parent_name, GFP_KERNEL); - if (!gate->parent[0]) - goto out; - } - + /* register the clock */ clk = clk_register(dev, name, &clk_gate_ops, &gate->hw, - gate->parent, + (parent_name ? &parent_name : NULL), (parent_name ? 1 : 0), flags); - if (clk) - return clk; -out: - kfree(gate->parent[0]); - kfree(gate); - return NULL; + if (IS_ERR(clk)) + kfree(gate); + + return clk; } diff --git a/drivers/clk/clk-mux.c b/drivers/clk/clk-mux.c index bd5e598b9f1e..6e58f11ab81f 100644 --- a/drivers/clk/clk-mux.c +++ b/drivers/clk/clk-mux.c @@ -94,9 +94,10 @@ struct clk *clk_register_mux(struct device *dev, const char *name, u8 clk_mux_flags, spinlock_t *lock) { struct clk_mux *mux; + struct clk *clk; + /* allocate the mux */ mux = kzalloc(sizeof(struct clk_mux), GFP_KERNEL); - if (!mux) { pr_err("%s: could not allocate mux clk\n", __func__); return ERR_PTR(-ENOMEM); @@ -109,6 +110,11 @@ struct clk *clk_register_mux(struct device *dev, const char *name, mux->flags = clk_mux_flags; mux->lock = lock; - return clk_register(dev, name, &clk_mux_ops, &mux->hw, + clk = clk_register(dev, name, &clk_mux_ops, &mux->hw, parent_names, num_parents, flags); + + if (IS_ERR(clk)) + kfree(mux); + + return clk; } diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h index 97f9fabf3be2..3323d24a7be4 100644 --- a/include/linux/clk-provider.h +++ b/include/linux/clk-provider.h @@ -176,7 +176,6 @@ struct clk_gate { u8 bit_idx; u8 flags; spinlock_t *lock; - const char *parent[1]; }; #define CLK_GATE_SET_TO_DISABLE BIT(0) @@ -214,7 +213,6 @@ struct clk_divider { u8 width; u8 flags; spinlock_t *lock; - const char *parent[1]; }; #define CLK_DIVIDER_ONE_BASED BIT(0) -- cgit v1.2.3 From 81536e072b54e30bbfd1a9a6b8094f7b3dd5321c Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Thu, 12 Apr 2012 20:50:17 +0800 Subject: clk: always pass parent_rate into .round_rate The parent_rate will likely be used by most .round_rate implementation no matter whether flag CLK_SET_RATE_PARENT is set or not, so let's always pass parent_rate into .round_rate. Signed-off-by: Shawn Guo Signed-off-by: Mike Turquette --- drivers/clk/clk-divider.c | 12 +++--------- drivers/clk/clk.c | 16 +++++++--------- 2 files changed, 10 insertions(+), 18 deletions(-) diff --git a/drivers/clk/clk-divider.c b/drivers/clk/clk-divider.c index 5fc541d017f1..03b127c0313b 100644 --- a/drivers/clk/clk-divider.c +++ b/drivers/clk/clk-divider.c @@ -67,8 +67,8 @@ static int clk_divider_bestdiv(struct clk_hw *hw, unsigned long rate, if (divider->flags & CLK_DIVIDER_ONE_BASED) maxdiv--; - if (!best_parent_rate) { - parent_rate = __clk_get_rate(__clk_get_parent(hw->clk)); + if (!(__clk_get_flags(hw->clk) & CLK_SET_RATE_PARENT)) { + parent_rate = *best_parent_rate; bestdiv = DIV_ROUND_UP(parent_rate, rate); bestdiv = bestdiv == 0 ? 1 : bestdiv; bestdiv = bestdiv > maxdiv ? maxdiv : bestdiv; @@ -108,13 +108,7 @@ static long clk_divider_round_rate(struct clk_hw *hw, unsigned long rate, int div; div = clk_divider_bestdiv(hw, rate, prate); - if (prate) - return *prate / div; - else { - unsigned long r; - r = __clk_get_rate(__clk_get_parent(hw->clk)); - return r / div; - } + return *prate / div; } static int clk_divider_set_rate(struct clk_hw *hw, unsigned long rate) diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c index 8f7c3849c8f6..1ab4f7e5c7ef 100644 --- a/drivers/clk/clk.c +++ b/drivers/clk/clk.c @@ -582,7 +582,7 @@ EXPORT_SYMBOL_GPL(clk_get_rate); */ unsigned long __clk_round_rate(struct clk *clk, unsigned long rate) { - unsigned long unused; + unsigned long parent_rate = 0; if (!clk) return -EINVAL; @@ -590,10 +590,10 @@ unsigned long __clk_round_rate(struct clk *clk, unsigned long rate) if (!clk->ops->round_rate) return clk->rate; - if (clk->flags & CLK_SET_RATE_PARENT) - return clk->ops->round_rate(clk->hw, rate, &unused); - else - return clk->ops->round_rate(clk->hw, rate, NULL); + if (clk->parent) + parent_rate = clk->parent->rate; + + return clk->ops->round_rate(clk->hw, rate, &parent_rate); } /** @@ -763,7 +763,7 @@ static void clk_calc_subtree(struct clk *clk, unsigned long new_rate) static struct clk *clk_calc_new_rates(struct clk *clk, unsigned long rate) { struct clk *top = clk; - unsigned long best_parent_rate; + unsigned long best_parent_rate = 0; unsigned long new_rate; /* sanity */ @@ -775,9 +775,6 @@ static struct clk *clk_calc_new_rates(struct clk *clk, unsigned long rate) if (!clk->ops->round_rate) { clk->new_rate = clk->rate; return NULL; - } else { - new_rate = clk->ops->round_rate(clk->hw, rate, NULL); - goto out; } } @@ -794,6 +791,7 @@ static struct clk *clk_calc_new_rates(struct clk *clk, unsigned long rate) goto out; } + best_parent_rate = clk->parent->rate; new_rate = clk->ops->round_rate(clk->hw, rate, &best_parent_rate); if (best_parent_rate != clk->parent->rate) { -- cgit v1.2.3 From 1c0035d710dd3bfa86d58f851b8737c7f11a9bbc Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Thu, 12 Apr 2012 20:50:18 +0800 Subject: clk: pass parent_rate into .set_rate For most of .set_rate implementation, parent_rate will be used, so just like passing parent_rate into .recalc_rate, let's pass parent_rate into .set_rate too. It also updates the kernel doc for .set_rate ops. Signed-off-by: Shawn Guo Signed-off-by: Mike Turquette --- drivers/clk/clk-divider.c | 5 +++-- drivers/clk/clk.c | 2 +- include/linux/clk-provider.h | 21 +++++++-------------- 3 files changed, 11 insertions(+), 17 deletions(-) diff --git a/drivers/clk/clk-divider.c b/drivers/clk/clk-divider.c index 03b127c0313b..90627e4069af 100644 --- a/drivers/clk/clk-divider.c +++ b/drivers/clk/clk-divider.c @@ -111,14 +111,15 @@ static long clk_divider_round_rate(struct clk_hw *hw, unsigned long rate, return *prate / div; } -static int clk_divider_set_rate(struct clk_hw *hw, unsigned long rate) +static int clk_divider_set_rate(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate) { struct clk_divider *divider = to_clk_divider(hw); unsigned int div; unsigned long flags = 0; u32 val; - div = __clk_get_rate(__clk_get_parent(hw->clk)) / rate; + div = parent_rate / rate; if (!(divider->flags & CLK_DIVIDER_ONE_BASED)) div--; diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c index 1ab4f7e5c7ef..62ecac53b0a2 100644 --- a/drivers/clk/clk.c +++ b/drivers/clk/clk.c @@ -848,7 +848,7 @@ static void clk_change_rate(struct clk *clk) old_rate = clk->rate; if (clk->ops->set_rate) - clk->ops->set_rate(clk->hw, clk->new_rate); + clk->ops->set_rate(clk->hw, clk->new_rate, clk->parent->rate); if (clk->ops->recalc_rate) clk->rate = clk->ops->recalc_rate(clk->hw, diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h index 3323d24a7be4..cb82918d8fe0 100644 --- a/include/linux/clk-provider.h +++ b/include/linux/clk-provider.h @@ -88,19 +88,11 @@ struct clk_hw { * array index into the value programmed into the hardware. * Returns 0 on success, -EERROR otherwise. * - * @set_rate: Change the rate of this clock. If this callback returns - * CLK_SET_RATE_PARENT, the rate change will be propagated to the - * parent clock (which may propagate again if the parent clock - * also sets this flag). The requested rate of the parent is - * passed back from the callback in the second 'unsigned long *' - * argument. Note that it is up to the hardware clock's set_rate - * implementation to insure that clocks do not run out of spec - * when propgating the call to set_rate up to the parent. One way - * to do this is to gate the clock (via clk_disable and/or - * clk_unprepare) before calling clk_set_rate, then ungating it - * afterward. If your clock also has the CLK_GATE_SET_RATE flag - * set then this will insure safety. Returns 0 on success, - * -EERROR otherwise. + * @set_rate: Change the rate of this clock. The requested rate is specified + * by the second argument, which should typically be the return + * of .round_rate call. The third argument gives the parent rate + * which is likely helpful for most .set_rate implementation. + * Returns 0 on success, -EERROR otherwise. * * The clk_enable/clk_disable and clk_prepare/clk_unprepare pairs allow * implementations to split any work between atomic (enable) and sleepable @@ -125,7 +117,8 @@ struct clk_ops { unsigned long *); int (*set_parent)(struct clk_hw *hw, u8 index); u8 (*get_parent)(struct clk_hw *hw); - int (*set_rate)(struct clk_hw *hw, unsigned long); + int (*set_rate)(struct clk_hw *hw, unsigned long, + unsigned long); void (*init)(struct clk_hw *hw); }; -- cgit v1.2.3 From f4d8af2e5ae6294d5e2220d3963def6f7ffc0873 Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Thu, 12 Apr 2012 20:50:19 +0800 Subject: clk: propagate round_rate for CLK_SET_RATE_PARENT case Need to propagate round_rate call for the clk that has no .round_rate operation but with flag CLK_SET_RATE_PARENT set. For example, clk_mux is a clk with no .round_rate operation. However, it could likely be in a clk_set_rate propagation path, saying it has parent clk who has .round_rate and .set_rate operations. Signed-off-by: Shawn Guo Signed-off-by: Mike Turquette --- drivers/clk/clk.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c index 62ecac53b0a2..c6e8866289b4 100644 --- a/drivers/clk/clk.c +++ b/drivers/clk/clk.c @@ -587,8 +587,12 @@ unsigned long __clk_round_rate(struct clk *clk, unsigned long rate) if (!clk) return -EINVAL; - if (!clk->ops->round_rate) - return clk->rate; + if (!clk->ops->round_rate) { + if (clk->flags & CLK_SET_RATE_PARENT) + return __clk_round_rate(clk->parent, rate); + else + return clk->rate; + } if (clk->parent) parent_rate = clk->parent->rate; -- cgit v1.2.3 From 1f73f31ad6e37df0679f6842b7405d96515ec8b1 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Tue, 17 Apr 2012 16:45:35 +0530 Subject: clk: Fix typo in comment CLK_MUX_INDEX_BIT is mistakenly written as CLK_MUX_INDEX_BITWISE in comment. Fix it. CLK_GATE_SET_TO_DISABLE is mistakenly written as CLK_GATE_SET_DISABLE in comment. Fix it. Signed-off-by: Viresh Kumar Signed-off-by: Mike Turquette --- include/linux/clk-provider.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h index cb82918d8fe0..8f2148942b87 100644 --- a/include/linux/clk-provider.h +++ b/include/linux/clk-provider.h @@ -159,7 +159,7 @@ struct clk *clk_register_fixed_rate(struct device *dev, const char *name, * Clock which can gate its output. Implements .enable & .disable * * Flags: - * CLK_GATE_SET_DISABLE - by default this clock sets the bit at bit_idx to + * CLK_GATE_SET_TO_DISABLE - by default this clock sets the bit at bit_idx to * enable the clock. Setting this flag does the opposite: setting the bit * disable the clock and clearing it enables the clock */ @@ -232,7 +232,7 @@ struct clk *clk_register_divider(struct device *dev, const char *name, * * Flags: * CLK_MUX_INDEX_ONE - register index starts at 1, not 0 - * CLK_MUX_INDEX_BITWISE - register index is a single bit (power of two) + * CLK_MUX_INDEX_BIT - register index is a single bit (power of two) */ struct clk_mux { struct clk_hw hw; -- cgit v1.2.3 From fbc42aab543307e9bfc1dfb029db929f3fafcacd Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Tue, 17 Apr 2012 16:45:37 +0530 Subject: clk: clk-gate: Create clk_gate_endisable() This patch tries to remove duplicate code for clk_gate clocks. This creates another routine clk_gate_endisable() which will take care of enable/disable clock with knowledge of CLK_GATE_SET_TO_DISABLE flag. It works on following logic: For enabling clock, enable = 1 set2dis = 1 -> clear bit -> set = 0 set2dis = 0 -> set bit -> set = 1 For disabling clock, enable = 0 set2dis = 1 -> set bit -> set = 1 set2dis = 0 -> clear bit -> set = 0 So, result is always: enable xor set2dis. Signed-off-by: Viresh Kumar Signed-off-by: Mike Turquette --- drivers/clk/clk-gate.c | 54 +++++++++++++++++++++++--------------------------- 1 file changed, 25 insertions(+), 29 deletions(-) diff --git a/drivers/clk/clk-gate.c b/drivers/clk/clk-gate.c index 42a4b941b6e7..00216164fb9d 100644 --- a/drivers/clk/clk-gate.c +++ b/drivers/clk/clk-gate.c @@ -28,32 +28,38 @@ #define to_clk_gate(_hw) container_of(_hw, struct clk_gate, hw) -static void clk_gate_set_bit(struct clk_gate *gate) +/* + * It works on following logic: + * + * For enabling clock, enable = 1 + * set2dis = 1 -> clear bit -> set = 0 + * set2dis = 0 -> set bit -> set = 1 + * + * For disabling clock, enable = 0 + * set2dis = 1 -> set bit -> set = 1 + * set2dis = 0 -> clear bit -> set = 0 + * + * So, result is always: enable xor set2dis. + */ +static void clk_gate_endisable(struct clk_hw *hw, int enable) { - u32 reg; + struct clk_gate *gate = to_clk_gate(hw); + int set = gate->flags & CLK_GATE_SET_TO_DISABLE ? 1 : 0; unsigned long flags = 0; + u32 reg; + + set ^= enable; if (gate->lock) spin_lock_irqsave(gate->lock, flags); reg = readl(gate->reg); - reg |= BIT(gate->bit_idx); - writel(reg, gate->reg); - - if (gate->lock) - spin_unlock_irqrestore(gate->lock, flags); -} - -static void clk_gate_clear_bit(struct clk_gate *gate) -{ - u32 reg; - unsigned long flags = 0; - if (gate->lock) - spin_lock_irqsave(gate->lock, flags); + if (set) + reg |= BIT(gate->bit_idx); + else + reg &= ~BIT(gate->bit_idx); - reg = readl(gate->reg); - reg &= ~BIT(gate->bit_idx); writel(reg, gate->reg); if (gate->lock) @@ -62,24 +68,14 @@ static void clk_gate_clear_bit(struct clk_gate *gate) static int clk_gate_enable(struct clk_hw *hw) { - struct clk_gate *gate = to_clk_gate(hw); - - if (gate->flags & CLK_GATE_SET_TO_DISABLE) - clk_gate_clear_bit(gate); - else - clk_gate_set_bit(gate); + clk_gate_endisable(hw, 1); return 0; } static void clk_gate_disable(struct clk_hw *hw) { - struct clk_gate *gate = to_clk_gate(hw); - - if (gate->flags & CLK_GATE_SET_TO_DISABLE) - clk_gate_set_bit(gate); - else - clk_gate_clear_bit(gate); + clk_gate_endisable(hw, 0); } static int clk_gate_is_enabled(struct clk_hw *hw) -- cgit v1.2.3 From 182f9e8cd5e451911a37f121f942409205ede0d6 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Tue, 17 Apr 2012 16:45:36 +0530 Subject: clk: clk-private: Add DEFINE_CLK macro All macros used for creating different kind of clocks have similar code for initializing struct clk. This patch removes those redundant lines and create another macro DEFINE_CLK. Signed-off-by: Viresh Kumar Signed-off-by: Mike Turquette --- include/linux/clk-private.h | 59 +++++++++++++++------------------------------ 1 file changed, 20 insertions(+), 39 deletions(-) diff --git a/include/linux/clk-private.h b/include/linux/clk-private.h index e7032fdd45eb..eeae7a3cfc45 100644 --- a/include/linux/clk-private.h +++ b/include/linux/clk-private.h @@ -55,6 +55,18 @@ struct clk { * alternative macro for static initialization */ +#define DEFINE_CLK(_name, _ops, _flags, _parent_names, \ + _parents) \ + static struct clk _name = { \ + .name = #_name, \ + .ops = &_ops, \ + .hw = &_name##_hw.hw, \ + .parent_names = _parent_names, \ + .num_parents = ARRAY_SIZE(_parent_names), \ + .parents = _parents, \ + .flags = _flags, \ + } + #define DEFINE_CLK_FIXED_RATE(_name, _flags, _rate, \ _fixed_rate_flags) \ static struct clk _name; \ @@ -66,15 +78,8 @@ struct clk { .fixed_rate = _rate, \ .flags = _fixed_rate_flags, \ }; \ - static struct clk _name = { \ - .name = #_name, \ - .ops = &clk_fixed_rate_ops, \ - .hw = &_name##_hw.hw, \ - .parent_names = _name##_parent_names, \ - .num_parents = \ - ARRAY_SIZE(_name##_parent_names), \ - .flags = _flags, \ - }; + DEFINE_CLK(_name, clk_fixed_rate_ops, _flags, \ + _name##_parent_names, NULL); #define DEFINE_CLK_GATE(_name, _parent_name, _parent_ptr, \ _flags, _reg, _bit_idx, \ @@ -95,16 +100,8 @@ struct clk { .flags = _gate_flags, \ .lock = _lock, \ }; \ - static struct clk _name = { \ - .name = #_name, \ - .ops = &clk_gate_ops, \ - .hw = &_name##_hw.hw, \ - .parent_names = _name##_parent_names, \ - .num_parents = \ - ARRAY_SIZE(_name##_parent_names), \ - .parents = _name##_parents, \ - .flags = _flags, \ - }; + DEFINE_CLK(_name, clk_gate_ops, _flags, \ + _name##_parent_names, _name##_parents); #define DEFINE_CLK_DIVIDER(_name, _parent_name, _parent_ptr, \ _flags, _reg, _shift, _width, \ @@ -126,16 +123,8 @@ struct clk { .flags = _divider_flags, \ .lock = _lock, \ }; \ - static struct clk _name = { \ - .name = #_name, \ - .ops = &clk_divider_ops, \ - .hw = &_name##_hw.hw, \ - .parent_names = _name##_parent_names, \ - .num_parents = \ - ARRAY_SIZE(_name##_parent_names), \ - .parents = _name##_parents, \ - .flags = _flags, \ - }; + DEFINE_CLK(_name, clk_divider_ops, _flags, \ + _name##_parent_names, _name##_parents); #define DEFINE_CLK_MUX(_name, _parent_names, _parents, _flags, \ _reg, _shift, _width, \ @@ -151,16 +140,8 @@ struct clk { .flags = _mux_flags, \ .lock = _lock, \ }; \ - static struct clk _name = { \ - .name = #_name, \ - .ops = &clk_mux_ops, \ - .hw = &_name##_hw.hw, \ - .parent_names = _parent_names, \ - .num_parents = \ - ARRAY_SIZE(_parent_names), \ - .parents = _parents, \ - .flags = _flags, \ - }; + DEFINE_CLK(_name, clk_mux_ops, _flags, _parent_names, \ + _parents); /** * __clk_init - initialize the data structures in a struct clk -- cgit v1.2.3 From 1b2f99037a29d48d03ddd2fd0dc117888ec737f4 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Tue, 17 Apr 2012 16:45:38 +0530 Subject: clk: Don't set clk->new_rate twice if (!clk->ops->round_rate && (clk->flags & CLK_SET_RATE_PARENT)) is true, then we don't need to set clk->new_rate here, as we will call clk_calc_subtree() afterwards and it also sets clk->new_rate. Signed-off-by: Viresh Kumar Signed-off-by: Mike Turquette --- drivers/clk/clk.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c index c6e8866289b4..2dd20c01134d 100644 --- a/drivers/clk/clk.c +++ b/drivers/clk/clk.c @@ -790,7 +790,7 @@ static struct clk *clk_calc_new_rates(struct clk *clk, unsigned long rate) if (!clk->ops->round_rate) { top = clk_calc_new_rates(clk->parent, rate); - new_rate = clk->new_rate = clk->parent->new_rate; + new_rate = clk->parent->new_rate; goto out; } -- cgit v1.2.3 From 01033be1742abfa4359a40d21e8e8ecca39974e5 Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Mon, 9 Apr 2012 15:24:58 -0500 Subject: clk: select CLKDEV_LOOKUP for COMMON_CLK Using the common clock infrastructure without the common clkdev code makes little sense, so select CLKDEV_LOOKUP for COMMON_CLK. Signed-off-by: Rob Herring --- drivers/clk/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig index 165e1febae53..f05a60dc1a03 100644 --- a/drivers/clk/Kconfig +++ b/drivers/clk/Kconfig @@ -12,6 +12,7 @@ config HAVE_MACH_CLKDEV config COMMON_CLK bool select HAVE_CLK_PREPARE + select CLKDEV_LOOKUP ---help--- The common clock framework is a single definition of struct clk, useful across many platforms, as well as an -- cgit v1.2.3 From 8b7730ddff5affd623bed2affa0d0fa47ebbad3b Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Mon, 9 Apr 2012 15:24:59 -0500 Subject: clk: remove trailing whitespace from clk.h Remove trailing whitespace from 2 lines. Signed-off-by: Rob Herring --- include/linux/clk.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/include/linux/clk.h b/include/linux/clk.h index c9547d99e52c..0e078bdec09f 100644 --- a/include/linux/clk.h +++ b/include/linux/clk.h @@ -220,7 +220,7 @@ void clk_put(struct clk *clk); * Returns rounded clock rate in Hz, or negative errno. */ long clk_round_rate(struct clk *clk, unsigned long rate); - + /** * clk_set_rate - set the clock rate for a clock source * @clk: clock source @@ -229,7 +229,7 @@ long clk_round_rate(struct clk *clk, unsigned long rate); * Returns success (0) or negative errno. */ int clk_set_rate(struct clk *clk, unsigned long rate); - + /** * clk_set_parent - set the parent clock source for this clock * @clk: clock source -- cgit v1.2.3 From dd5127010afa560b1cfde7e2cffeadabdd20885d Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Tue, 24 Apr 2012 15:20:02 +0200 Subject: pinctrl: fix dangling comment This comment was referring to an older PINMUX define, it should be PINCTRL now. Reported-by: Jean-Christophe PLAGNIOL-VILLARD Acked-by: Dong Aisheng Signed-off-by: Linus Walleij --- include/linux/pinctrl/machine.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/linux/pinctrl/machine.h b/include/linux/pinctrl/machine.h index e4d1de742502..9c4a19867289 100644 --- a/include/linux/pinctrl/machine.h +++ b/include/linux/pinctrl/machine.h @@ -163,5 +163,5 @@ static inline int pinctrl_register_mappings(struct pinctrl_map const *map, return 0; } -#endif /* !CONFIG_PINMUX */ +#endif /* !CONFIG_PINCTRL */ #endif -- cgit v1.2.3 From fde04f419a230fb7f7dc018a9deca6f5d431831e Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Wed, 25 Apr 2012 10:32:16 -0600 Subject: pinctrl: propagate map validation errors pinctrl_register_map() was returning early if pinmux_validate_map() or pinconf_validate_map() failed, but was not actually returning the error code. Signed-off-by: Stephen Warren Signed-off-by: Linus Walleij --- drivers/pinctrl/core.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/pinctrl/core.c b/drivers/pinctrl/core.c index 5cd5a5a3a403..913c83e2bf1c 100644 --- a/drivers/pinctrl/core.c +++ b/drivers/pinctrl/core.c @@ -911,13 +911,13 @@ int pinctrl_register_map(struct pinctrl_map const *maps, unsigned num_maps, case PIN_MAP_TYPE_MUX_GROUP: ret = pinmux_validate_map(&maps[i], i); if (ret < 0) - return 0; + return ret; break; case PIN_MAP_TYPE_CONFIGS_PIN: case PIN_MAP_TYPE_CONFIGS_GROUP: ret = pinconf_validate_map(&maps[i], i); if (ret < 0) - return 0; + return ret; break; default: pr_err("failed to register map %s (%d): invalid type given\n", -- cgit v1.2.3 From 02ae6da28fb7aa31d8bf1972c99e83c58b684198 Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Thu, 26 Apr 2012 10:18:52 -0600 Subject: pinctrl: add kerneldoc for pinctrl_ops device tree functions Signed-off-by: Stephen Warren Signed-off-by: Linus Walleij --- include/linux/pinctrl/pinctrl.h | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/include/linux/pinctrl/pinctrl.h b/include/linux/pinctrl/pinctrl.h index c22d0409d2ef..3b894a668d32 100644 --- a/include/linux/pinctrl/pinctrl.h +++ b/include/linux/pinctrl/pinctrl.h @@ -72,6 +72,15 @@ struct pinctrl_gpio_range { * group selector @pins, and the size of the array in @num_pins * @pin_dbg_show: optional debugfs display hook that will provide per-device * info for a certain pin in debugfs + * @dt_node_to_map: parse a device tree "pin configuration node", and create + * mapping table entries for it. These are returned through the @map and + * @num_maps output parameters. This function is optional, and may be + * omitted for pinctrl drivers that do not support device tree. + * @dt_free_map: free mapping table entries created via @dt_node_to_map. The + * top-level @map pointer must be freed, along with any dynamically + * allocated members of the mapping table entries themselves. This + * function is optional, and may be omitted for pinctrl drivers that do + * not support device tree. */ struct pinctrl_ops { int (*get_groups_count) (struct pinctrl_dev *pctldev); -- cgit v1.2.3 From ad6e1107baa2e7fda55c2020c25127eab9c0122b Mon Sep 17 00:00:00 2001 From: John Crispin Date: Thu, 26 Apr 2012 16:47:11 +0200 Subject: pinctrl: enhance reporting of errors when loading from DT There are a few places in the api where the code simply returns -EINVAL when it finds an error. An example is pinmux_map_to_setting() which now reports an error if we try to match a group with a function that it does not support. The reporting of errors in pinconf_check_ops and pinmux_check_ops now has the same style and is located inside the according functions and not the calling code. When the map is found in the DT but the default state can not be selected we get an error to know that the code at least tried. The patch also removes a stray word from one comment and a "->" from another for the sake of consistency. Finally we replace a few pr_err/debug() calls with dev_err/dbg(). Thanks go to Stephen Warren for reviewing the patch and enhancing the reporting inside pinmux_map_to_setting(). Signed-off-by: John Crispin Acked-by: Stephen Warren Cc: linux-kernel@vger.kernel.org Signed-off-by: Linus Walleij --- drivers/pinctrl/core.c | 29 ++++++++++++++--------------- drivers/pinctrl/pinconf.c | 10 ++++++++-- drivers/pinctrl/pinmux.c | 37 +++++++++++++++++++++++++++---------- 3 files changed, 49 insertions(+), 27 deletions(-) diff --git a/drivers/pinctrl/core.c b/drivers/pinctrl/core.c index 913c83e2bf1c..138e72f74377 100644 --- a/drivers/pinctrl/core.c +++ b/drivers/pinctrl/core.c @@ -1391,37 +1391,29 @@ struct pinctrl_dev *pinctrl_register(struct pinctrl_desc *pctldesc, /* check core ops for sanity */ ret = pinctrl_check_ops(pctldev); if (ret) { - pr_err("%s pinctrl ops lacks necessary functions\n", - pctldesc->name); + dev_err(dev, "pinctrl ops lacks necessary functions\n"); goto out_err; } /* If we're implementing pinmuxing, check the ops for sanity */ if (pctldesc->pmxops) { ret = pinmux_check_ops(pctldev); - if (ret) { - pr_err("%s pinmux ops lacks necessary functions\n", - pctldesc->name); + if (ret) goto out_err; - } } /* If we're implementing pinconfig, check the ops for sanity */ if (pctldesc->confops) { ret = pinconf_check_ops(pctldev); - if (ret) { - pr_err("%s pin config ops lacks necessary functions\n", - pctldesc->name); + if (ret) goto out_err; - } } /* Register all the pins */ - pr_debug("try to register %d pins on %s...\n", - pctldesc->npins, pctldesc->name); + dev_dbg(dev, "try to register %d pins ...\n", pctldesc->npins); ret = pinctrl_register_pins(pctldev, pctldesc->pins, pctldesc->npins); if (ret) { - pr_err("error during pin registration\n"); + dev_err(dev, "error during pin registration\n"); pinctrl_free_pindescs(pctldev, pctldesc->pins, pctldesc->npins); goto out_err; @@ -1436,8 +1428,15 @@ struct pinctrl_dev *pinctrl_register(struct pinctrl_desc *pctldesc, struct pinctrl_state *s = pinctrl_lookup_state_locked(pctldev->p, PINCTRL_STATE_DEFAULT); - if (!IS_ERR(s)) - pinctrl_select_state_locked(pctldev->p, s); + if (IS_ERR(s)) { + dev_dbg(dev, "failed to lookup the default state\n"); + } else { + ret = pinctrl_select_state_locked(pctldev->p, s); + if (ret) { + dev_err(dev, + "failed to select default state\n"); + } + } } mutex_unlock(&pinctrl_mutex); diff --git a/drivers/pinctrl/pinconf.c b/drivers/pinctrl/pinconf.c index 14f48c96b20d..7ce139ef7e64 100644 --- a/drivers/pinctrl/pinconf.c +++ b/drivers/pinctrl/pinconf.c @@ -28,11 +28,17 @@ int pinconf_check_ops(struct pinctrl_dev *pctldev) const struct pinconf_ops *ops = pctldev->desc->confops; /* We must be able to read out pin status */ - if (!ops->pin_config_get && !ops->pin_config_group_get) + if (!ops->pin_config_get && !ops->pin_config_group_get) { + dev_err(pctldev->dev, + "pinconf must be able to read out pin status\n"); return -EINVAL; + } /* We have to be able to config the pins in SOME way */ - if (!ops->pin_config_set && !ops->pin_config_group_set) + if (!ops->pin_config_set && !ops->pin_config_group_set) { + dev_err(pctldev->dev, + "pinconf has to be able to set a pins config\n"); return -EINVAL; + } return 0; } diff --git a/drivers/pinctrl/pinmux.c b/drivers/pinctrl/pinmux.c index 7cd0c7d0f2cf..2df753508eca 100644 --- a/drivers/pinctrl/pinmux.c +++ b/drivers/pinctrl/pinmux.c @@ -42,9 +42,10 @@ int pinmux_check_ops(struct pinctrl_dev *pctldev) !ops->get_function_name || !ops->get_function_groups || !ops->enable || - !ops->disable) + !ops->disable) { + dev_err(pctldev->dev, "pinmux ops lacks necessary functions\n"); return -EINVAL; - + } /* Check that all functions registered have names */ nfuncs = ops->get_functions_count(pctldev); while (selector < nfuncs) { @@ -143,7 +144,7 @@ static int pin_request(struct pinctrl_dev *pctldev, status = 0; if (status) { - dev_err(pctldev->dev, "->request on device %s failed for pin %d\n", + dev_err(pctldev->dev, "request on device %s failed for pin %d\n", pctldev->desc->name, pin); module_put(pctldev->owner); } @@ -330,17 +331,26 @@ int pinmux_map_to_setting(struct pinctrl_map const *map, } ret = pinmux_func_name_to_selector(pctldev, map->data.mux.function); - if (ret < 0) + if (ret < 0) { + dev_err(pctldev->dev, "invalid function %s in map table\n", + map->data.mux.function); return ret; + } setting->data.mux.func = ret; ret = pmxops->get_function_groups(pctldev, setting->data.mux.func, &groups, &num_groups); - if (ret < 0) + if (ret < 0) { + dev_err(pctldev->dev, "can't query groups for function %s\n", + map->data.mux.function); return ret; - if (!num_groups) + } + if (!num_groups) { + dev_err(pctldev->dev, + "function %s can't be selected on any group\n", + map->data.mux.function); return -EINVAL; - + } if (map->data.mux.group) { bool found = false; group = map->data.mux.group; @@ -350,15 +360,22 @@ int pinmux_map_to_setting(struct pinctrl_map const *map, break; } } - if (!found) + if (!found) { + dev_err(pctldev->dev, + "invalid group \"%s\" for function \"%s\"\n", + group, map->data.mux.function); return -EINVAL; + } } else { group = groups[0]; } ret = pinctrl_get_group_selector(pctldev, group); - if (ret < 0) + if (ret < 0) { + dev_err(pctldev->dev, "invalid group %s in map table\n", + map->data.mux.group); return ret; + } setting->data.mux.group = ret; ret = pctlops->get_group_pins(pctldev, setting->data.mux.group, &pins, @@ -375,7 +392,7 @@ int pinmux_map_to_setting(struct pinctrl_map const *map, ret = pin_request(pctldev, pins[i], map->dev_name, NULL); if (ret) { dev_err(pctldev->dev, - "could not get request pin %d on device %s\n", + "could not request pin %d on device %s\n", pins[i], pinctrl_dev_get_name(pctldev)); /* On error release all taken pins */ i--; /* this pin just failed */ -- cgit v1.2.3 From 5b3aa5f7c6287b1a0698950a91e94546888e553b Mon Sep 17 00:00:00 2001 From: Dong Aisheng Date: Thu, 26 Apr 2012 16:15:50 +0800 Subject: pinctrl: add pinctrl_provide_dummies interface for platforms to use Add a interface pinctrl_provide_dummies for platform to indicate whether it needs use pinctrl dummy state. ChangeLog v3->v4: * remove dummy gpio support in pinctrl subsystem. Let gpio driver decide whether it wants to use pinctrl gpio mux function. ChangeLog v2->v3: * Also changed the missed pinctrl gpio APIs in v1. ChangeLog v1->v2: * Based on sascha's suggestion, drop using kconfig since it will hide pinctrl errors on all other boards. See: https://lkml.org/lkml/2012/4/18/282 It seemed both Linus and Stephen agreed with this way, so i'm ok with it too. * Add dummy gpio support. pinctrl gpio in the same situation as state. * Patch name changed. Original is pinctrl: handle dummy state in core. * Split removing old dt dummy interface into a separate patch Cc: Linus Walleij Cc: Sascha Hauer Acked-by: Stephen Warren Signed-off-by: Dong Aisheng Signed-off-by: Linus Walleij --- drivers/pinctrl/core.c | 29 +++++++++++++++++++++++++++-- include/linux/pinctrl/machine.h | 5 ++++- 2 files changed, 31 insertions(+), 3 deletions(-) diff --git a/drivers/pinctrl/core.c b/drivers/pinctrl/core.c index 138e72f74377..a6386b3a3c15 100644 --- a/drivers/pinctrl/core.c +++ b/drivers/pinctrl/core.c @@ -43,6 +43,8 @@ struct pinctrl_maps { unsigned num_maps; }; +static bool pinctrl_dummy_state; + /* Mutex taken by all entry points */ DEFINE_MUTEX(pinctrl_mutex); @@ -61,6 +63,19 @@ static LIST_HEAD(pinctrl_maps); _i_ < _maps_node_->num_maps; \ i++, _map_ = &_maps_node_->maps[_i_]) +/** + * pinctrl_provide_dummies() - indicate if pinctrl provides dummy state support + * + * Usually this function is called by platforms without pinctrl driver support + * but run with some shared drivers using pinctrl APIs. + * After calling this function, the pinctrl core will return successfully + * with creating a dummy state for the driver to keep going smoothly. + */ +void pinctrl_provide_dummies(void) +{ + pinctrl_dummy_state = true; +} + const char *pinctrl_dev_get_name(struct pinctrl_dev *pctldev) { /* We're not allowed to register devices without name */ @@ -719,8 +734,18 @@ static struct pinctrl_state *pinctrl_lookup_state_locked(struct pinctrl *p, struct pinctrl_state *state; state = find_state(p, name); - if (!state) - return ERR_PTR(-ENODEV); + if (!state) { + if (pinctrl_dummy_state) { + /* create dummy state */ + dev_dbg(p->dev, "using pinctrl dummy state (%s)\n", + name); + state = create_state(p, name); + if (IS_ERR(state)) + return state; + } else { + return ERR_PTR(-ENODEV); + } + } return state; } diff --git a/include/linux/pinctrl/machine.h b/include/linux/pinctrl/machine.h index 9c4a19867289..7d22ab00343f 100644 --- a/include/linux/pinctrl/machine.h +++ b/include/linux/pinctrl/machine.h @@ -154,7 +154,7 @@ struct pinctrl_map { extern int pinctrl_register_mappings(struct pinctrl_map const *map, unsigned num_maps); - +extern void pinctrl_provide_dummies(void); #else static inline int pinctrl_register_mappings(struct pinctrl_map const *map, @@ -163,5 +163,8 @@ static inline int pinctrl_register_mappings(struct pinctrl_map const *map, return 0; } +static inline void pinctrl_provide_dummies(void) +{ +} #endif /* !CONFIG_PINCTRL */ #endif -- cgit v1.2.3 From fa599c333d3d66846545026b41bcf36d1350fe30 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Tue, 24 Apr 2012 11:15:39 +0530 Subject: ARM: SPEAr3xx: Correct keyboard data passed from DT keyboard data passed via DT is in wrong format. Fix it. Signed-off-by: Viresh Kumar Signed-off-by: Arnd Bergmann --- arch/arm/boot/dts/spear300-evb.dts | 162 ++++++++++++++++++------------------- 1 file changed, 81 insertions(+), 81 deletions(-) diff --git a/arch/arm/boot/dts/spear300-evb.dts b/arch/arm/boot/dts/spear300-evb.dts index eaecc29b9d81..6a79d69775b5 100644 --- a/arch/arm/boot/dts/spear300-evb.dts +++ b/arch/arm/boot/dts/spear300-evb.dts @@ -81,87 +81,87 @@ }; kbd@a0000000 { - linux,keymap = < 0x00010000 - 0x00020100 - 0x00030200 - 0x00040300 - 0x00050400 - 0x00060500 - 0x00070600 - 0x00080700 - 0x00090800 - 0x000a0001 - 0x000c0101 - 0x000d0201 - 0x000e0301 - 0x000f0401 - 0x00100501 - 0x00110601 - 0x00120701 - 0x00130801 - 0x00140002 - 0x00150102 - 0x00160202 - 0x00170302 - 0x00180402 - 0x00190502 - 0x001a0602 - 0x001b0702 - 0x001c0802 - 0x001d0003 - 0x001e0103 - 0x001f0203 - 0x00200303 - 0x00210403 - 0x00220503 - 0x00230603 - 0x00240703 - 0x00250803 - 0x00260004 - 0x00270104 - 0x00280204 - 0x00290304 - 0x002a0404 - 0x002b0504 - 0x002c0604 - 0x002d0704 - 0x002e0804 - 0x002f0005 - 0x00300105 - 0x00310205 - 0x00320305 - 0x00330405 - 0x00340505 - 0x00350605 - 0x00360705 - 0x00370805 - 0x00380006 - 0x00390106 - 0x003a0206 - 0x003b0306 - 0x003c0406 - 0x003d0506 - 0x003e0606 - 0x003f0706 - 0x00400806 - 0x00410007 - 0x00420107 - 0x00430207 - 0x00440307 - 0x00450407 - 0x00460507 - 0x00470607 - 0x00480707 - 0x00490807 - 0x004a0008 - 0x004b0108 - 0x004c0208 - 0x004d0308 - 0x004e0408 - 0x004f0508 - 0x00500608 - 0x00510708 - 0x00520808 >; + linux,keymap = < 0x00000001 + 0x00010002 + 0x00020003 + 0x00030004 + 0x00040005 + 0x00050006 + 0x00060007 + 0x00070008 + 0x00080009 + 0x0100000a + 0x0101000c + 0x0102000d + 0x0103000e + 0x0104000f + 0x01050010 + 0x01060011 + 0x01070012 + 0x01080013 + 0x02000014 + 0x02010015 + 0x02020016 + 0x02030017 + 0x02040018 + 0x02050019 + 0x0206001a + 0x0207001b + 0x0208001c + 0x0300001d + 0x0301001e + 0x0302001f + 0x03030020 + 0x03040021 + 0x03050022 + 0x03060023 + 0x03070024 + 0x03080025 + 0x04000026 + 0x04010027 + 0x04020028 + 0x04030029 + 0x0404002a + 0x0405002b + 0x0406002c + 0x0407002d + 0x0408002e + 0x0500002f + 0x05010030 + 0x05020031 + 0x05030032 + 0x05040033 + 0x05050034 + 0x05060035 + 0x05070036 + 0x05080037 + 0x06000038 + 0x06010039 + 0x0602003a + 0x0603003b + 0x0604003c + 0x0605003d + 0x0606003e + 0x0607003f + 0x06080040 + 0x07000041 + 0x07010042 + 0x07020043 + 0x07030044 + 0x07040045 + 0x07050046 + 0x07060047 + 0x07070048 + 0x07080049 + 0x0800004a + 0x0801004b + 0x0802004c + 0x0803004d + 0x0804004e + 0x0805004f + 0x08060050 + 0x08070051 + 0x08080052 >; autorepeat; st,mode = <0>; status = "okay"; -- cgit v1.2.3 From 4650b7cbea4db73f459181f67f939b510e3a17b2 Mon Sep 17 00:00:00 2001 From: Dong Aisheng Date: Wed, 25 Apr 2012 19:38:13 +0800 Subject: pinctrl: support gpio request deferred probing As pinctrl handles, it may be possible the pinctrl gpio ranges are still not got registered when user call pinctrl_gpio_request. Thus, add defer support for it too. Signed-off-by: Dong Aisheng Acked-by: Stephen Warren Signed-off-by: Linus Walleij --- drivers/pinctrl/core.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/pinctrl/core.c b/drivers/pinctrl/core.c index a6386b3a3c15..c3b331b74fa0 100644 --- a/drivers/pinctrl/core.c +++ b/drivers/pinctrl/core.c @@ -291,7 +291,8 @@ pinctrl_match_gpio_range(struct pinctrl_dev *pctldev, unsigned gpio) * * Find the pin controller handling a certain GPIO pin from the pinspace of * the GPIO subsystem, return the device and the matching GPIO range. Returns - * negative if the GPIO range could not be found in any device. + * -EPROBE_DEFER if the GPIO range could not be found in any device since it + * may still have not been registered. */ static int pinctrl_get_device_gpio_range(unsigned gpio, struct pinctrl_dev **outdev, @@ -311,7 +312,7 @@ static int pinctrl_get_device_gpio_range(unsigned gpio, } } - return -EINVAL; + return -EPROBE_DEFER; } /** @@ -397,7 +398,7 @@ int pinctrl_request_gpio(unsigned gpio) ret = pinctrl_get_device_gpio_range(gpio, &pctldev, &range); if (ret) { mutex_unlock(&pinctrl_mutex); - return -EINVAL; + return ret; } /* Convert to the pin controllers number space */ -- cgit v1.2.3 From 183f1d0c6450ee032d97a2d01ed5eb00e0dbaa49 Mon Sep 17 00:00:00 2001 From: Dong Aisheng Date: Fri, 27 Apr 2012 11:36:20 +0800 Subject: dt: add of_get_child_count helper function Currently most code to get child count in kernel are almost same, add a helper to implement this function for dt to use. Cc: Grant Likely Acked-by: Rob Herring Acked-by: Stephen Warren Signed-off-by: Dong Aisheng Signed-off-by: Linus Walleij --- include/linux/of.h | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/include/linux/of.h b/include/linux/of.h index e3f942d9da89..2ec1083af7ff 100644 --- a/include/linux/of.h +++ b/include/linux/of.h @@ -193,6 +193,17 @@ extern struct device_node *of_get_next_child(const struct device_node *node, for (child = of_get_next_child(parent, NULL); child != NULL; \ child = of_get_next_child(parent, child)) +static inline int of_get_child_count(const struct device_node *np) +{ + struct device_node *child; + int num = 0; + + for_each_child_of_node(np, child) + num++; + + return num; +} + extern struct device_node *of_find_node_with_property( struct device_node *from, const char *prop_name); #define for_each_node_with_property(dn, prop_name) \ @@ -300,6 +311,11 @@ static inline bool of_have_populated_dt(void) #define for_each_child_of_node(parent, child) \ while (0) +static inline int of_get_child_count(const struct device_node *np) +{ + return 0; +} + static inline int of_device_is_compatible(const struct device_node *device, const char *name) { -- cgit v1.2.3 From ae75ff8145384000e27eaa805c12e6971e3bec45 Mon Sep 17 00:00:00 2001 From: Dong Aisheng Date: Fri, 27 Apr 2012 20:26:16 +0800 Subject: pinctrl: pinctrl-imx: add imx pinctrl core driver The driver has mux and config support while the gpio is still not supported. For select input setting, the driver will handle it internally and do not need user to take care of it. The pinctrl-imx core driver will parse the dts file and dynamically create the pinmux functions and groups. Each IMX SoC pinctrl driver should register pins with a pin register map including mux register and config register and select input map to core for proper operations. Acked-by: Stephen Warren Acked-by: Shawn Guo Signed-off-by: Dong Aisheng Signed-off-by: Linus Walleij --- .../bindings/pinctrl/fsl,imx-pinctrl.txt | 95 ++++ drivers/pinctrl/Kconfig | 5 + drivers/pinctrl/Makefile | 1 + drivers/pinctrl/pinctrl-imx.c | 627 +++++++++++++++++++++ drivers/pinctrl/pinctrl-imx.h | 106 ++++ 5 files changed, 834 insertions(+) create mode 100644 Documentation/devicetree/bindings/pinctrl/fsl,imx-pinctrl.txt create mode 100644 drivers/pinctrl/pinctrl-imx.c create mode 100644 drivers/pinctrl/pinctrl-imx.h diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,imx-pinctrl.txt new file mode 100644 index 000000000000..ab19e6bc7d3b --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx-pinctrl.txt @@ -0,0 +1,95 @@ +* Freescale IOMUX Controller (IOMUXC) for i.MX + +The IOMUX Controller (IOMUXC), together with the IOMUX, enables the IC +to share one PAD to several functional blocks. The sharing is done by +multiplexing the PAD input/output signals. For each PAD there are up to +8 muxing options (called ALT modes). Since different modules require +different PAD settings (like pull up, keeper, etc) the IOMUXC controls +also the PAD settings parameters. + +Please refer to pinctrl-bindings.txt in this directory for details of the +common pinctrl bindings used by client devices, including the meaning of the +phrase "pin configuration node". + +Freescale IMX pin configuration node is a node of a group of pins which can be +used for a specific device or function. This node represents both mux and config +of the pins in that group. The 'mux' selects the function mode(also named mux +mode) this pin can work on and the 'config' configures various pad settings +such as pull-up, open drain, drive strength, etc. + +Required properties for iomux controller: +- compatible: "fsl,-iomuxc" + Please refer to each fsl,-pinctrl.txt binding doc for supported SoCs. + +Required properties for pin configuration node: +- fsl,pins: two integers array, represents a group of pins mux and config + setting. The format is fsl,pins = , PIN_FUNC_ID is a + pin working on a specific function, CONFIG is the pad setting value like + pull-up on this pin. Please refer to fsl,-pinctrl.txt for the valid + pins and functions of each SoC. + +Bits used for CONFIG: +NO_PAD_CTL(1 << 31): indicate this pin does not need config. + +SION(1 << 30): Software Input On Field. +Force the selected mux mode input path no matter of MUX_MODE functionality. +By default the input path is determined by functionality of the selected +mux mode (regular). + +Other bits are used for PAD setting. +Please refer to each fsl,-pinctrl,txt binding doc for SoC specific part +of bits definitions. + +NOTE: +Some requirements for using fsl,imx-pinctrl binding: +1. We have pin function node defined under iomux controller node to represent + what pinmux functions this SoC supports. +2. The pin configuration node intends to work on a specific function should + to be defined under that specific function node. + The function node's name should represent well about what function + this group of pins in this pin configuration node are working on. +3. The driver can use the function node's name and pin configuration node's + name describe the pin function and group hierarchy. + For example, Linux IMX pinctrl driver takes the function node's name + as the function name and pin configuration node's name as group name to + create the map table. +4. Each pin configuration node should have a phandle, devices can set pins + configurations by referring to the phandle of that pin configuration node. + +Examples: +usdhc@0219c000 { /* uSDHC4 */ + fsl,card-wired; + vmmc-supply = <®_3p3v>; + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc4_1>; +}; + +iomuxc@020e0000 { + compatible = "fsl,imx6q-iomuxc"; + reg = <0x020e0000 0x4000>; + + /* shared pinctrl settings */ + usdhc4 { + pinctrl_usdhc4_1: usdhc4grp-1 { + fsl,pins = <1386 0x17059 /* MX6Q_PAD_SD4_CMD__USDHC4_CMD */ + 1392 0x10059 /* MX6Q_PAD_SD4_CLK__USDHC4_CLK */ + 1462 0x17059 /* MX6Q_PAD_SD4_DAT0__USDHC4_DAT0 */ + 1470 0x17059 /* MX6Q_PAD_SD4_DAT1__USDHC4_DAT1 */ + 1478 0x17059 /* MX6Q_PAD_SD4_DAT2__USDHC4_DAT2 */ + 1486 0x17059 /* MX6Q_PAD_SD4_DAT3__USDHC4_DAT3 */ + 1493 0x17059 /* MX6Q_PAD_SD4_DAT4__USDHC4_DAT4 */ + 1501 0x17059 /* MX6Q_PAD_SD4_DAT5__USDHC4_DAT5 */ + 1509 0x17059 /* MX6Q_PAD_SD4_DAT6__USDHC4_DAT6 */ + 1517 0x17059>; /* MX6Q_PAD_SD4_DAT7__USDHC4_DAT7 */ + }; + }; + .... +}; +Refer to the IOMUXC controller chapter in imx6q datasheet, +0x17059 means enable hysteresis, 47KOhm Pull Up, 50Mhz speed, +80Ohm driver strength and Fast Slew Rate. +User should refer to each SoC spec to set the correct value. + +TODO: when dtc macro support is available, we can change above raw data +to dt macro which can get better readability in dts file. diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig index f73a5ea89754..aad28826d39b 100644 --- a/drivers/pinctrl/Kconfig +++ b/drivers/pinctrl/Kconfig @@ -26,6 +26,11 @@ config DEBUG_PINCTRL help Say Y here to add some extra checks and diagnostics to PINCTRL calls. +config PINCTRL_IMX + bool + select PINMUX + select PINCONF + config PINCTRL_PXA3xx bool select PINMUX diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile index 8e3c95a02fbd..a01a97cfe640 100644 --- a/drivers/pinctrl/Makefile +++ b/drivers/pinctrl/Makefile @@ -9,6 +9,7 @@ ifeq ($(CONFIG_OF),y) obj-$(CONFIG_PINCTRL) += devicetree.o endif obj-$(CONFIG_GENERIC_PINCONF) += pinconf-generic.o +obj-$(CONFIG_PINCTRL_IMX) += pinctrl-imx.o obj-$(CONFIG_PINCTRL_PXA3xx) += pinctrl-pxa3xx.o obj-$(CONFIG_PINCTRL_MMP2) += pinctrl-mmp2.o obj-$(CONFIG_PINCTRL_PXA168) += pinctrl-pxa168.o diff --git a/drivers/pinctrl/pinctrl-imx.c b/drivers/pinctrl/pinctrl-imx.c new file mode 100644 index 000000000000..8faf613ff1b2 --- /dev/null +++ b/drivers/pinctrl/pinctrl-imx.c @@ -0,0 +1,627 @@ +/* + * Core driver for the imx pin controller + * + * Copyright (C) 2012 Freescale Semiconductor, Inc. + * Copyright (C) 2012 Linaro Ltd. + * + * Author: Dong Aisheng + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "core.h" +#include "pinctrl-imx.h" + +#define IMX_PMX_DUMP(info, p, m, c, n) \ +{ \ + int i, j; \ + printk("Format: Pin Mux Config\n"); \ + for (i = 0; i < n; i++) { \ + j = p[i]; \ + printk("%s %d 0x%lx\n", \ + info->pins[j].name, \ + m[i], c[i]); \ + } \ +} + +/* The bits in CONFIG cell defined in binding doc*/ +#define IMX_NO_PAD_CTL 0x80000000 /* no pin config need */ +#define IMX_PAD_SION 0x40000000 /* set SION */ + +/** + * @dev: a pointer back to containing device + * @base: the offset to the controller in virtual memory + */ +struct imx_pinctrl { + struct device *dev; + struct pinctrl_dev *pctl; + void __iomem *base; + const struct imx_pinctrl_soc_info *info; +}; + +static const struct imx_pin_reg *imx_find_pin_reg( + const struct imx_pinctrl_soc_info *info, + unsigned pin, bool is_mux, unsigned mux) +{ + const struct imx_pin_reg *pin_reg = NULL; + int i; + + for (i = 0; i < info->npin_regs; i++) { + pin_reg = &info->pin_regs[i]; + if (pin_reg->pid != pin) + continue; + if (!is_mux) + break; + else if (pin_reg->mux_mode == (mux & IMX_MUX_MASK)) + break; + } + + if (!pin_reg) { + dev_err(info->dev, "Pin(%s): unable to find pin reg map\n", + info->pins[pin].name); + return NULL; + } + + return pin_reg; +} + +static const inline struct imx_pin_group *imx_pinctrl_find_group_by_name( + const struct imx_pinctrl_soc_info *info, + const char *name) +{ + const struct imx_pin_group *grp = NULL; + int i; + + for (i = 0; i < info->ngroups; i++) { + if (!strcmp(info->groups[i].name, name)) { + grp = &info->groups[i]; + break; + } + } + + return grp; +} + +static int imx_get_groups_count(struct pinctrl_dev *pctldev) +{ + struct imx_pinctrl *ipctl = pinctrl_dev_get_drvdata(pctldev); + const struct imx_pinctrl_soc_info *info = ipctl->info; + + return info->ngroups; +} + +static const char *imx_get_group_name(struct pinctrl_dev *pctldev, + unsigned selector) +{ + struct imx_pinctrl *ipctl = pinctrl_dev_get_drvdata(pctldev); + const struct imx_pinctrl_soc_info *info = ipctl->info; + + return info->groups[selector].name; +} + +static int imx_get_group_pins(struct pinctrl_dev *pctldev, unsigned selector, + const unsigned **pins, + unsigned *npins) +{ + struct imx_pinctrl *ipctl = pinctrl_dev_get_drvdata(pctldev); + const struct imx_pinctrl_soc_info *info = ipctl->info; + + if (selector >= info->ngroups) + return -EINVAL; + + *pins = info->groups[selector].pins; + *npins = info->groups[selector].npins; + + return 0; +} + +static void imx_pin_dbg_show(struct pinctrl_dev *pctldev, struct seq_file *s, + unsigned offset) +{ + seq_printf(s, "%s", dev_name(pctldev->dev)); +} + +static int imx_dt_node_to_map(struct pinctrl_dev *pctldev, + struct device_node *np, + struct pinctrl_map **map, unsigned *num_maps) +{ + struct imx_pinctrl *ipctl = pinctrl_dev_get_drvdata(pctldev); + const struct imx_pinctrl_soc_info *info = ipctl->info; + const struct imx_pin_group *grp; + struct pinctrl_map *new_map; + struct device_node *parent; + int map_num = 1; + int i; + + /* + * first find the group of this node and check if we need create + * config maps for pins + */ + grp = imx_pinctrl_find_group_by_name(info, np->name); + if (!grp) { + dev_err(info->dev, "unable to find group for node %s\n", + np->name); + return -EINVAL; + } + + for (i = 0; i < grp->npins; i++) { + if (!(grp->configs[i] & IMX_NO_PAD_CTL)) + map_num++; + } + + new_map = kmalloc(sizeof(struct pinctrl_map) * map_num, GFP_KERNEL); + if (!new_map) + return -ENOMEM; + + *map = new_map; + *num_maps = map_num; + + /* create mux map */ + parent = of_get_parent(np); + if (!parent) + return -EINVAL; + new_map[0].type = PIN_MAP_TYPE_MUX_GROUP; + new_map[0].data.mux.function = parent->name; + new_map[0].data.mux.group = np->name; + of_node_put(parent); + + /* create config map */ + new_map++; + for (i = 0; i < grp->npins; i++) { + if (!(grp->configs[i] & IMX_NO_PAD_CTL)) { + new_map[i].type = PIN_MAP_TYPE_CONFIGS_PIN; + new_map[i].data.configs.group_or_pin = + pin_get_name(pctldev, grp->pins[i]); + new_map[i].data.configs.configs = &grp->configs[i]; + new_map[i].data.configs.num_configs = 1; + } + } + + dev_dbg(pctldev->dev, "maps: function %s group %s num %d\n", + new_map->data.mux.function, new_map->data.mux.group, map_num); + + return 0; +} + +static void imx_dt_free_map(struct pinctrl_dev *pctldev, + struct pinctrl_map *map, unsigned num_maps) +{ + int i; + + for (i = 0; i < num_maps; i++) + kfree(map); +} + +static struct pinctrl_ops imx_pctrl_ops = { + .get_groups_count = imx_get_groups_count, + .get_group_name = imx_get_group_name, + .get_group_pins = imx_get_group_pins, + .pin_dbg_show = imx_pin_dbg_show, + .dt_node_to_map = imx_dt_node_to_map, + .dt_free_map = imx_dt_free_map, + +}; + +static int imx_pmx_enable(struct pinctrl_dev *pctldev, unsigned selector, + unsigned group) +{ + struct imx_pinctrl *ipctl = pinctrl_dev_get_drvdata(pctldev); + const struct imx_pinctrl_soc_info *info = ipctl->info; + const struct imx_pin_reg *pin_reg; + const unsigned *pins, *mux; + unsigned int npins, pin_id; + int i; + + /* + * Configure the mux mode for each pin in the group for a specific + * function. + */ + pins = info->groups[group].pins; + npins = info->groups[group].npins; + mux = info->groups[group].mux_mode; + + WARN_ON(!pins || !npins || !mux); + + dev_dbg(ipctl->dev, "enable function %s group %s\n", + info->functions[selector].name, info->groups[group].name); + + for (i = 0; i < npins; i++) { + pin_id = pins[i]; + + pin_reg = imx_find_pin_reg(info, pin_id, 1, mux[i]); + if (!pin_reg) + return -EINVAL; + + if (!pin_reg->mux_reg) { + dev_err(ipctl->dev, "Pin(%s) does not support mux function\n", + info->pins[pin_id].name); + return -EINVAL; + } + + writel(mux[i], ipctl->base + pin_reg->mux_reg); + dev_dbg(ipctl->dev, "write: offset 0x%x val 0x%x\n", + pin_reg->mux_reg, mux[i]); + + /* some pins also need select input setting, set it if found */ + if (pin_reg->input_reg) { + writel(pin_reg->input_val, ipctl->base + pin_reg->input_reg); + dev_dbg(ipctl->dev, + "==>select_input: offset 0x%x val 0x%x\n", + pin_reg->input_reg, pin_reg->input_val); + } + } + + return 0; +} + +static void imx_pmx_disable(struct pinctrl_dev *pctldev, unsigned func_selector, + unsigned group_selector) +{ + /* nothing to do here */ +} + +static int imx_pmx_get_funcs_count(struct pinctrl_dev *pctldev) +{ + struct imx_pinctrl *ipctl = pinctrl_dev_get_drvdata(pctldev); + const struct imx_pinctrl_soc_info *info = ipctl->info; + + return info->nfunctions; +} + +static const char *imx_pmx_get_func_name(struct pinctrl_dev *pctldev, + unsigned selector) +{ + struct imx_pinctrl *ipctl = pinctrl_dev_get_drvdata(pctldev); + const struct imx_pinctrl_soc_info *info = ipctl->info; + + return info->functions[selector].name; +} + +static int imx_pmx_get_groups(struct pinctrl_dev *pctldev, unsigned selector, + const char * const **groups, + unsigned * const num_groups) +{ + struct imx_pinctrl *ipctl = pinctrl_dev_get_drvdata(pctldev); + const struct imx_pinctrl_soc_info *info = ipctl->info; + + *groups = info->functions[selector].groups; + *num_groups = info->functions[selector].num_groups; + + return 0; +} + +static struct pinmux_ops imx_pmx_ops = { + .get_functions_count = imx_pmx_get_funcs_count, + .get_function_name = imx_pmx_get_func_name, + .get_function_groups = imx_pmx_get_groups, + .enable = imx_pmx_enable, + .disable = imx_pmx_disable, +}; + +static int imx_pinconf_get(struct pinctrl_dev *pctldev, + unsigned pin_id, unsigned long *config) +{ + struct imx_pinctrl *ipctl = pinctrl_dev_get_drvdata(pctldev); + const struct imx_pinctrl_soc_info *info = ipctl->info; + const struct imx_pin_reg *pin_reg; + + pin_reg = imx_find_pin_reg(info, pin_id, 0, 0); + if (!pin_reg) + return -EINVAL; + + if (!pin_reg->conf_reg) { + dev_err(info->dev, "Pin(%s) does not support config function\n", + info->pins[pin_id].name); + return -EINVAL; + } + + *config = readl(ipctl->base + pin_reg->conf_reg); + + return 0; +} + +static int imx_pinconf_set(struct pinctrl_dev *pctldev, + unsigned pin_id, unsigned long config) +{ + struct imx_pinctrl *ipctl = pinctrl_dev_get_drvdata(pctldev); + const struct imx_pinctrl_soc_info *info = ipctl->info; + const struct imx_pin_reg *pin_reg; + + pin_reg = imx_find_pin_reg(info, pin_id, 0, 0); + if (!pin_reg) + return -EINVAL; + + if (!pin_reg->conf_reg) { + dev_err(info->dev, "Pin(%s) does not support config function\n", + info->pins[pin_id].name); + return -EINVAL; + } + + dev_dbg(ipctl->dev, "pinconf set pin %s\n", + info->pins[pin_id].name); + + writel(config, ipctl->base + pin_reg->conf_reg); + dev_dbg(ipctl->dev, "write: offset 0x%x val 0x%lx\n", + pin_reg->conf_reg, config); + + return 0; +} + +static void imx_pinconf_dbg_show(struct pinctrl_dev *pctldev, + struct seq_file *s, unsigned pin_id) +{ + struct imx_pinctrl *ipctl = pinctrl_dev_get_drvdata(pctldev); + const struct imx_pinctrl_soc_info *info = ipctl->info; + const struct imx_pin_reg *pin_reg; + unsigned long config; + + pin_reg = imx_find_pin_reg(info, pin_id, 0, 0); + if (!pin_reg || !pin_reg->conf_reg) { + seq_printf(s, "N/A"); + return; + } + + config = readl(ipctl->base + pin_reg->conf_reg); + seq_printf(s, "0x%lx", config); +} + +static void imx_pinconf_group_dbg_show(struct pinctrl_dev *pctldev, + struct seq_file *s, unsigned group) +{ + struct imx_pinctrl *ipctl = pinctrl_dev_get_drvdata(pctldev); + const struct imx_pinctrl_soc_info *info = ipctl->info; + struct imx_pin_group *grp; + unsigned long config; + const char *name; + int i, ret; + + if (group > info->ngroups) + return; + + seq_printf(s, "\n"); + grp = &info->groups[group]; + for (i = 0; i < grp->npins; i++) { + name = pin_get_name(pctldev, grp->pins[i]); + ret = imx_pinconf_get(pctldev, grp->pins[i], &config); + if (ret) + return; + seq_printf(s, "%s: 0x%lx", name, config); + } +} + +struct pinconf_ops imx_pinconf_ops = { + .pin_config_get = imx_pinconf_get, + .pin_config_set = imx_pinconf_set, + .pin_config_dbg_show = imx_pinconf_dbg_show, + .pin_config_group_dbg_show = imx_pinconf_group_dbg_show, +}; + +static struct pinctrl_desc imx_pinctrl_desc = { + .pctlops = &imx_pctrl_ops, + .pmxops = &imx_pmx_ops, + .confops = &imx_pinconf_ops, + .owner = THIS_MODULE, +}; + +/* decode pin id and mux from pin function id got from device tree*/ +static int imx_pinctrl_get_pin_id_and_mux(const struct imx_pinctrl_soc_info *info, + unsigned int pin_func_id, unsigned int *pin_id, + unsigned int *mux) +{ + if (pin_func_id > info->npin_regs) + return -EINVAL; + + *pin_id = info->pin_regs[pin_func_id].pid; + *mux = info->pin_regs[pin_func_id].mux_mode; + + return 0; +} + +static int __devinit imx_pinctrl_parse_groups(struct device_node *np, + struct imx_pin_group *grp, + struct imx_pinctrl_soc_info *info, + u32 index) +{ + unsigned int pin_func_id; + int ret, size; + const const __be32 *list; + int i, j; + u32 config; + + dev_dbg(info->dev, "group(%d): %s\n", index, np->name); + + /* Initialise group */ + grp->name = np->name; + + /* + * the binding format is fsl,pins = , + * do sanity check and calculate pins number + */ + list = of_get_property(np, "fsl,pins", &size); + /* we do not check return since it's safe node passed down */ + size /= sizeof(*list); + if (!size || size % 2) { + dev_err(info->dev, "wrong pins number or pins and configs should be pairs\n"); + return -EINVAL; + } + + grp->npins = size / 2; + grp->pins = devm_kzalloc(info->dev, grp->npins * sizeof(unsigned int), + GFP_KERNEL); + grp->mux_mode = devm_kzalloc(info->dev, grp->npins * sizeof(unsigned int), + GFP_KERNEL); + grp->configs = devm_kzalloc(info->dev, grp->npins * sizeof(unsigned long), + GFP_KERNEL); + for (i = 0, j = 0; i < size; i += 2, j++) { + pin_func_id = be32_to_cpu(*list++); + ret = imx_pinctrl_get_pin_id_and_mux(info, pin_func_id, + &grp->pins[j], &grp->mux_mode[j]); + if (ret) { + dev_err(info->dev, "get invalid pin function id\n"); + return -EINVAL; + } + /* SION bit is in mux register */ + config = be32_to_cpu(*list++); + if (config & IMX_PAD_SION) + grp->mux_mode[j] |= IOMUXC_CONFIG_SION; + grp->configs[j] = config & ~IMX_PAD_SION; + } + +#ifdef DEBUG + IMX_PMX_DUMP(info, grp->pins, grp->mux_mode, grp->configs, grp->npins); +#endif + return 0; +} + +static int __devinit imx_pinctrl_parse_functions(struct device_node *np, + struct imx_pinctrl_soc_info *info, u32 index) +{ + struct device_node *child; + struct imx_pmx_func *func; + struct imx_pin_group *grp; + int ret; + static u32 grp_index; + u32 i = 0; + + dev_dbg(info->dev, "parse function(%d): %s\n", index, np->name); + + func = &info->functions[index]; + + /* Initialise function */ + func->name = np->name; + func->num_groups = of_get_child_count(np); + if (func->num_groups <= 0) { + dev_err(info->dev, "no groups defined\n"); + return -EINVAL; + } + func->groups = devm_kzalloc(info->dev, + func->num_groups * sizeof(char *), GFP_KERNEL); + + for_each_child_of_node(np, child) { + func->groups[i] = child->name; + grp = &info->groups[grp_index++]; + ret = imx_pinctrl_parse_groups(child, grp, info, i++); + if (ret) + return ret; + } + + return 0; +} + +static int __devinit imx_pinctrl_probe_dt(struct platform_device *pdev, + struct imx_pinctrl_soc_info *info) +{ + struct device_node *np = pdev->dev.of_node; + struct device_node *child; + int ret; + u32 nfuncs = 0; + u32 i = 0; + + if (!np) + return -ENODEV; + + nfuncs = of_get_child_count(np); + if (nfuncs <= 0) { + dev_err(&pdev->dev, "no functions defined\n"); + return -EINVAL; + } + + info->nfunctions = nfuncs; + info->functions = devm_kzalloc(&pdev->dev, nfuncs * sizeof(struct imx_pmx_func), + GFP_KERNEL); + if (!info->functions) + return -ENOMEM; + + info->ngroups = 0; + for_each_child_of_node(np, child) + info->ngroups += of_get_child_count(child); + info->groups = devm_kzalloc(&pdev->dev, info->ngroups * sizeof(struct imx_pin_group), + GFP_KERNEL); + if (!info->groups) + return -ENOMEM; + + for_each_child_of_node(np, child) { + ret = imx_pinctrl_parse_functions(child, info, i++); + if (ret) { + dev_err(&pdev->dev, "failed to parse function\n"); + return ret; + } + } + + return 0; +} + +int __devinit imx_pinctrl_probe(struct platform_device *pdev, + struct imx_pinctrl_soc_info *info) +{ + struct imx_pinctrl *ipctl; + struct resource *res; + int ret; + + if (!info || !info->pins || !info->npins + || !info->pin_regs || !info->npin_regs) { + dev_err(&pdev->dev, "wrong pinctrl info\n"); + return -EINVAL; + } + info->dev = &pdev->dev; + + /* Create state holders etc for this driver */ + ipctl = devm_kzalloc(&pdev->dev, sizeof(*ipctl), GFP_KERNEL); + if (!ipctl) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) + return -ENOENT; + + ipctl->base = devm_request_and_ioremap(&pdev->dev, res); + if (!ipctl->base) + return -EBUSY; + + imx_pinctrl_desc.name = dev_name(&pdev->dev); + imx_pinctrl_desc.pins = info->pins; + imx_pinctrl_desc.npins = info->npins; + + ret = imx_pinctrl_probe_dt(pdev, info); + if (ret) { + dev_err(&pdev->dev, "fail to probe dt properties\n"); + return ret; + } + + ipctl->info = info; + ipctl->dev = info->dev; + platform_set_drvdata(pdev, ipctl); + ipctl->pctl = pinctrl_register(&imx_pinctrl_desc, &pdev->dev, ipctl); + if (!ipctl->pctl) { + dev_err(&pdev->dev, "could not register IMX pinctrl driver\n"); + return -EINVAL; + } + + dev_info(&pdev->dev, "initialized IMX pinctrl driver\n"); + + return 0; +} + +int __devexit imx_pinctrl_remove(struct platform_device *pdev) +{ + struct imx_pinctrl *ipctl = platform_get_drvdata(pdev); + + pinctrl_unregister(ipctl->pctl); + + return 0; +} diff --git a/drivers/pinctrl/pinctrl-imx.h b/drivers/pinctrl/pinctrl-imx.h new file mode 100644 index 000000000000..9b65e7828f1d --- /dev/null +++ b/drivers/pinctrl/pinctrl-imx.h @@ -0,0 +1,106 @@ +/* + * IMX pinmux core definitions + * + * Copyright (C) 2012 Freescale Semiconductor, Inc. + * Copyright (C) 2012 Linaro Ltd. + * + * Author: Dong Aisheng + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef __DRIVERS_PINCTRL_IMX_H +#define __DRIVERS_PINCTRL_IMX_H + +struct platform_device; + +/** + * struct imx_pin_group - describes an IMX pin group + * @name: the name of this specific pin group + * @pins: an array of discrete physical pins used in this group, taken + * from the driver-local pin enumeration space + * @npins: the number of pins in this group array, i.e. the number of + * elements in .pins so we can iterate over that array + * @mux_mode: the mux mode for each pin in this group. The size of this + * array is the same as pins. + * @configs: the config for each pin in this group. The size of this + * array is the same as pins. + */ +struct imx_pin_group { + const char *name; + unsigned int *pins; + unsigned npins; + unsigned int *mux_mode; + unsigned long *configs; +}; + +/** + * struct imx_pmx_func - describes IMX pinmux functions + * @name: the name of this specific function + * @groups: corresponding pin groups + * @num_groups: the number of groups + */ +struct imx_pmx_func { + const char *name; + const char **groups; + unsigned num_groups; +}; + +/** + * struct imx_pin_reg - describe a pin reg map + * The last 3 members are used for select input setting + * @pid: pin id + * @mux_reg: mux register offset + * @conf_reg: config register offset + * @mux_mode: mux mode + * @input_reg: select input register offset for this mux if any + * 0 if no select input setting needed. + * @input_val: the value set to select input register + */ +struct imx_pin_reg { + u16 pid; + u16 mux_reg; + u16 conf_reg; + u8 mux_mode; + u16 input_reg; + u8 input_val; +}; + +struct imx_pinctrl_soc_info { + struct device *dev; + const struct pinctrl_pin_desc *pins; + unsigned int npins; + const struct imx_pin_reg *pin_regs; + unsigned int npin_regs; + struct imx_pin_group *groups; + unsigned int ngroups; + struct imx_pmx_func *functions; + unsigned int nfunctions; +}; + +#define NO_MUX 0x0 +#define NO_PAD 0x0 + +#define IMX_PIN_REG(id, conf, mux, mode, input, val) \ + { \ + .pid = id, \ + .conf_reg = conf, \ + .mux_reg = mux, \ + .mux_mode = mode, \ + .input_reg = input, \ + .input_val = val, \ + } + +#define IMX_PINCTRL_PIN(pin) PINCTRL_PIN(pin, #pin) + +#define PAD_CTL_MASK(len) ((1 << len) - 1) +#define IMX_MUX_MASK 0x7 +#define IOMUXC_CONFIG_SION (0x1 << 4) + +int imx_pinctrl_probe(struct platform_device *pdev, + struct imx_pinctrl_soc_info *info); +int imx_pinctrl_remove(struct platform_device *pdev); +#endif /* __DRIVERS_PINCTRL_IMX_H */ -- cgit v1.2.3 From d8fe35727a3c7e0f2c4ff0a579aab1d7ce252df8 Mon Sep 17 00:00:00 2001 From: Dong Aisheng Date: Fri, 27 Apr 2012 20:26:17 +0800 Subject: pinctrl: pinctrl-imx: add imx6q pinctrl driver Acked-by: Stephen Warren Acked-by: Shawn Guo Signed-off-by: Dong Aisheng Signed-off-by: Linus Walleij --- .../bindings/pinctrl/fsl,imx6q-pinctrl.txt | 1628 ++++++++++++++ drivers/pinctrl/Kconfig | 8 + drivers/pinctrl/Makefile | 1 + drivers/pinctrl/pinctrl-imx6q.c | 2331 ++++++++++++++++++++ 4 files changed, 3968 insertions(+) create mode 100644 Documentation/devicetree/bindings/pinctrl/fsl,imx6q-pinctrl.txt create mode 100644 drivers/pinctrl/pinctrl-imx6q.c diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx6q-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,imx6q-pinctrl.txt new file mode 100644 index 000000000000..82b43f915857 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx6q-pinctrl.txt @@ -0,0 +1,1628 @@ +* Freescale IMX6Q IOMUX Controller + +Please refer to fsl,imx-pinctrl.txt in this directory for common binding part +and usage. + +Required properties: +- compatible: "fsl,imx6q-iomuxc" +- fsl,pins: two integers array, represents a group of pins mux and config + setting. The format is fsl,pins = , PIN_FUNC_ID is a + pin working on a specific function, CONFIG is the pad setting value like + pull-up for this pin. Please refer to imx6q datasheet for the valid pad + config settings. + +CONFIG bits definition: +PAD_CTL_HYS (1 << 16) +PAD_CTL_PUS_100K_DOWN (0 << 14) +PAD_CTL_PUS_47K_UP (1 << 14) +PAD_CTL_PUS_100K_UP (2 << 14) +PAD_CTL_PUS_22K_UP (3 << 14) +PAD_CTL_PUE (1 << 13) +PAD_CTL_PKE (1 << 12) +PAD_CTL_ODE (1 << 11) +PAD_CTL_SPEED_LOW (1 << 6) +PAD_CTL_SPEED_MED (2 << 6) +PAD_CTL_SPEED_HIGH (3 << 6) +PAD_CTL_DSE_DISABLE (0 << 3) +PAD_CTL_DSE_240ohm (1 << 3) +PAD_CTL_DSE_120ohm (2 << 3) +PAD_CTL_DSE_80ohm (3 << 3) +PAD_CTL_DSE_60ohm (4 << 3) +PAD_CTL_DSE_48ohm (5 << 3) +PAD_CTL_DSE_40ohm (6 << 3) +PAD_CTL_DSE_34ohm (7 << 3) +PAD_CTL_SRE_FAST (1 << 0) +PAD_CTL_SRE_SLOW (0 << 0) + +See below for available PIN_FUNC_ID for imx6q: +MX6Q_PAD_SD2_DAT1__USDHC2_DAT1 0 +MX6Q_PAD_SD2_DAT1__ECSPI5_SS0 1 +MX6Q_PAD_SD2_DAT1__WEIM_WEIM_CS_2 2 +MX6Q_PAD_SD2_DAT1__AUDMUX_AUD4_TXFS 3 +MX6Q_PAD_SD2_DAT1__KPP_COL_7 4 +MX6Q_PAD_SD2_DAT1__GPIO_1_14 5 +MX6Q_PAD_SD2_DAT1__CCM_WAIT 6 +MX6Q_PAD_SD2_DAT1__ANATOP_TESTO_0 7 +MX6Q_PAD_SD2_DAT2__USDHC2_DAT2 8 +MX6Q_PAD_SD2_DAT2__ECSPI5_SS1 9 +MX6Q_PAD_SD2_DAT2__WEIM_WEIM_CS_3 10 +MX6Q_PAD_SD2_DAT2__AUDMUX_AUD4_TXD 11 +MX6Q_PAD_SD2_DAT2__KPP_ROW_6 12 +MX6Q_PAD_SD2_DAT2__GPIO_1_13 13 +MX6Q_PAD_SD2_DAT2__CCM_STOP 14 +MX6Q_PAD_SD2_DAT2__ANATOP_TESTO_1 15 +MX6Q_PAD_SD2_DAT0__USDHC2_DAT0 16 +MX6Q_PAD_SD2_DAT0__ECSPI5_MISO 17 +MX6Q_PAD_SD2_DAT0__AUDMUX_AUD4_RXD 18 +MX6Q_PAD_SD2_DAT0__KPP_ROW_7 19 +MX6Q_PAD_SD2_DAT0__GPIO_1_15 20 +MX6Q_PAD_SD2_DAT0__DCIC2_DCIC_OUT 21 +MX6Q_PAD_SD2_DAT0__TESTO_2 22 +MX6Q_PAD_RGMII_TXC__USBOH3_H2_DATA 23 +MX6Q_PAD_RGMII_TXC__ENET_RGMII_TXC 24 +MX6Q_PAD_RGMII_TXC__SPDIF_SPDIF_EXTCLK 25 +MX6Q_PAD_RGMII_TXC__GPIO_6_19 26 +MX6Q_PAD_RGMII_TXC__MIPI_CORE_DPHY_IN_0 27 +MX6Q_PAD_RGMII_TXC__ANATOP_24M_OUT 28 +MX6Q_PAD_RGMII_TD0__MIPI_HSI_CRL_TX_RDY 29 +MX6Q_PAD_RGMII_TD0__ENET_RGMII_TD0 30 +MX6Q_PAD_RGMII_TD0__GPIO_6_20 31 +MX6Q_PAD_RGMII_TD0__MIPI_CORE_DPHY_IN_1 32 +MX6Q_PAD_RGMII_TD1__MIPI_HSI_CRL_RX_FLG 33 +MX6Q_PAD_RGMII_TD1__ENET_RGMII_TD1 34 +MX6Q_PAD_RGMII_TD1__GPIO_6_21 35 +MX6Q_PAD_RGMII_TD1__MIPI_CORE_DPHY_IN_2 36 +MX6Q_PAD_RGMII_TD1__CCM_PLL3_BYP 37 +MX6Q_PAD_RGMII_TD2__MIPI_HSI_CRL_RX_DTA 38 +MX6Q_PAD_RGMII_TD2__ENET_RGMII_TD2 39 +MX6Q_PAD_RGMII_TD2__GPIO_6_22 40 +MX6Q_PAD_RGMII_TD2__MIPI_CORE_DPHY_IN_3 41 +MX6Q_PAD_RGMII_TD2__CCM_PLL2_BYP 42 +MX6Q_PAD_RGMII_TD3__MIPI_HSI_CRL_RX_WAK 43 +MX6Q_PAD_RGMII_TD3__ENET_RGMII_TD3 44 +MX6Q_PAD_RGMII_TD3__GPIO_6_23 45 +MX6Q_PAD_RGMII_TD3__MIPI_CORE_DPHY_IN_4 46 +MX6Q_PAD_RGMII_RX_CTL__USBOH3_H3_DATA 47 +MX6Q_PAD_RGMII_RX_CTL__RGMII_RX_CTL 48 +MX6Q_PAD_RGMII_RX_CTL__GPIO_6_24 49 +MX6Q_PAD_RGMII_RX_CTL__MIPI_DPHY_IN_5 50 +MX6Q_PAD_RGMII_RD0__MIPI_HSI_CRL_RX_RDY 51 +MX6Q_PAD_RGMII_RD0__ENET_RGMII_RD0 52 +MX6Q_PAD_RGMII_RD0__GPIO_6_25 53 +MX6Q_PAD_RGMII_RD0__MIPI_CORE_DPHY_IN_6 54 +MX6Q_PAD_RGMII_TX_CTL__USBOH3_H2_STROBE 55 +MX6Q_PAD_RGMII_TX_CTL__RGMII_TX_CTL 56 +MX6Q_PAD_RGMII_TX_CTL__GPIO_6_26 57 +MX6Q_PAD_RGMII_TX_CTL__CORE_DPHY_IN_7 58 +MX6Q_PAD_RGMII_TX_CTL__ANATOP_REF_OUT 59 +MX6Q_PAD_RGMII_RD1__MIPI_HSI_CTRL_TX_FL 60 +MX6Q_PAD_RGMII_RD1__ENET_RGMII_RD1 61 +MX6Q_PAD_RGMII_RD1__GPIO_6_27 62 +MX6Q_PAD_RGMII_RD1__CORE_DPHY_TEST_IN_8 63 +MX6Q_PAD_RGMII_RD1__SJC_FAIL 64 +MX6Q_PAD_RGMII_RD2__MIPI_HSI_CRL_TX_DTA 65 +MX6Q_PAD_RGMII_RD2__ENET_RGMII_RD2 66 +MX6Q_PAD_RGMII_RD2__GPIO_6_28 67 +MX6Q_PAD_RGMII_RD2__MIPI_CORE_DPHY_IN_9 68 +MX6Q_PAD_RGMII_RD3__MIPI_HSI_CRL_TX_WAK 69 +MX6Q_PAD_RGMII_RD3__ENET_RGMII_RD3 70 +MX6Q_PAD_RGMII_RD3__GPIO_6_29 71 +MX6Q_PAD_RGMII_RD3__MIPI_CORE_DPHY_IN10 72 +MX6Q_PAD_RGMII_RXC__USBOH3_H3_STROBE 73 +MX6Q_PAD_RGMII_RXC__ENET_RGMII_RXC 74 +MX6Q_PAD_RGMII_RXC__GPIO_6_30 75 +MX6Q_PAD_RGMII_RXC__MIPI_CORE_DPHY_IN11 76 +MX6Q_PAD_EIM_A25__WEIM_WEIM_A_25 77 +MX6Q_PAD_EIM_A25__ECSPI4_SS1 78 +MX6Q_PAD_EIM_A25__ECSPI2_RDY 79 +MX6Q_PAD_EIM_A25__IPU1_DI1_PIN12 80 +MX6Q_PAD_EIM_A25__IPU1_DI0_D1_CS 81 +MX6Q_PAD_EIM_A25__GPIO_5_2 82 +MX6Q_PAD_EIM_A25__HDMI_TX_CEC_LINE 83 +MX6Q_PAD_EIM_A25__PL301_PER1_HBURST_0 84 +MX6Q_PAD_EIM_EB2__WEIM_WEIM_EB_2 85 +MX6Q_PAD_EIM_EB2__ECSPI1_SS0 86 +MX6Q_PAD_EIM_EB2__CCM_DI1_EXT_CLK 87 +MX6Q_PAD_EIM_EB2__IPU2_CSI1_D_19 88 +MX6Q_PAD_EIM_EB2__HDMI_TX_DDC_SCL 89 +MX6Q_PAD_EIM_EB2__GPIO_2_30 90 +MX6Q_PAD_EIM_EB2__I2C2_SCL 91 +MX6Q_PAD_EIM_EB2__SRC_BT_CFG_30 92 +MX6Q_PAD_EIM_D16__WEIM_WEIM_D_16 93 +MX6Q_PAD_EIM_D16__ECSPI1_SCLK 94 +MX6Q_PAD_EIM_D16__IPU1_DI0_PIN5 95 +MX6Q_PAD_EIM_D16__IPU2_CSI1_D_18 96 +MX6Q_PAD_EIM_D16__HDMI_TX_DDC_SDA 97 +MX6Q_PAD_EIM_D16__GPIO_3_16 98 +MX6Q_PAD_EIM_D16__I2C2_SDA 99 +MX6Q_PAD_EIM_D17__WEIM_WEIM_D_17 100 +MX6Q_PAD_EIM_D17__ECSPI1_MISO 101 +MX6Q_PAD_EIM_D17__IPU1_DI0_PIN6 102 +MX6Q_PAD_EIM_D17__IPU2_CSI1_PIXCLK 103 +MX6Q_PAD_EIM_D17__DCIC1_DCIC_OUT 104 +MX6Q_PAD_EIM_D17__GPIO_3_17 105 +MX6Q_PAD_EIM_D17__I2C3_SCL 106 +MX6Q_PAD_EIM_D17__PL301_PER1_HBURST_1 107 +MX6Q_PAD_EIM_D18__WEIM_WEIM_D_18 108 +MX6Q_PAD_EIM_D18__ECSPI1_MOSI 109 +MX6Q_PAD_EIM_D18__IPU1_DI0_PIN7 110 +MX6Q_PAD_EIM_D18__IPU2_CSI1_D_17 111 +MX6Q_PAD_EIM_D18__IPU1_DI1_D0_CS 112 +MX6Q_PAD_EIM_D18__GPIO_3_18 113 +MX6Q_PAD_EIM_D18__I2C3_SDA 114 +MX6Q_PAD_EIM_D18__PL301_PER1_HBURST_2 115 +MX6Q_PAD_EIM_D19__WEIM_WEIM_D_19 116 +MX6Q_PAD_EIM_D19__ECSPI1_SS1 117 +MX6Q_PAD_EIM_D19__IPU1_DI0_PIN8 118 +MX6Q_PAD_EIM_D19__IPU2_CSI1_D_16 119 +MX6Q_PAD_EIM_D19__UART1_CTS 120 +MX6Q_PAD_EIM_D19__GPIO_3_19 121 +MX6Q_PAD_EIM_D19__EPIT1_EPITO 122 +MX6Q_PAD_EIM_D19__PL301_PER1_HRESP 123 +MX6Q_PAD_EIM_D20__WEIM_WEIM_D_20 124 +MX6Q_PAD_EIM_D20__ECSPI4_SS0 125 +MX6Q_PAD_EIM_D20__IPU1_DI0_PIN16 126 +MX6Q_PAD_EIM_D20__IPU2_CSI1_D_15 127 +MX6Q_PAD_EIM_D20__UART1_RTS 128 +MX6Q_PAD_EIM_D20__GPIO_3_20 129 +MX6Q_PAD_EIM_D20__EPIT2_EPITO 130 +MX6Q_PAD_EIM_D21__WEIM_WEIM_D_21 131 +MX6Q_PAD_EIM_D21__ECSPI4_SCLK 132 +MX6Q_PAD_EIM_D21__IPU1_DI0_PIN17 133 +MX6Q_PAD_EIM_D21__IPU2_CSI1_D_11 134 +MX6Q_PAD_EIM_D21__USBOH3_USBOTG_OC 135 +MX6Q_PAD_EIM_D21__GPIO_3_21 136 +MX6Q_PAD_EIM_D21__I2C1_SCL 137 +MX6Q_PAD_EIM_D21__SPDIF_IN1 138 +MX6Q_PAD_EIM_D22__WEIM_WEIM_D_22 139 +MX6Q_PAD_EIM_D22__ECSPI4_MISO 140 +MX6Q_PAD_EIM_D22__IPU1_DI0_PIN1 141 +MX6Q_PAD_EIM_D22__IPU2_CSI1_D_10 142 +MX6Q_PAD_EIM_D22__USBOH3_USBOTG_PWR 143 +MX6Q_PAD_EIM_D22__GPIO_3_22 144 +MX6Q_PAD_EIM_D22__SPDIF_OUT1 145 +MX6Q_PAD_EIM_D22__PL301_PER1_HWRITE 146 +MX6Q_PAD_EIM_D23__WEIM_WEIM_D_23 147 +MX6Q_PAD_EIM_D23__IPU1_DI0_D0_CS 148 +MX6Q_PAD_EIM_D23__UART3_CTS 149 +MX6Q_PAD_EIM_D23__UART1_DCD 150 +MX6Q_PAD_EIM_D23__IPU2_CSI1_DATA_EN 151 +MX6Q_PAD_EIM_D23__GPIO_3_23 152 +MX6Q_PAD_EIM_D23__IPU1_DI1_PIN2 153 +MX6Q_PAD_EIM_D23__IPU1_DI1_PIN14 154 +MX6Q_PAD_EIM_EB3__WEIM_WEIM_EB_3 155 +MX6Q_PAD_EIM_EB3__ECSPI4_RDY 156 +MX6Q_PAD_EIM_EB3__UART3_RTS 157 +MX6Q_PAD_EIM_EB3__UART1_RI 158 +MX6Q_PAD_EIM_EB3__IPU2_CSI1_HSYNC 159 +MX6Q_PAD_EIM_EB3__GPIO_2_31 160 +MX6Q_PAD_EIM_EB3__IPU1_DI1_PIN3 161 +MX6Q_PAD_EIM_EB3__SRC_BT_CFG_31 162 +MX6Q_PAD_EIM_D24__WEIM_WEIM_D_24 163 +MX6Q_PAD_EIM_D24__ECSPI4_SS2 164 +MX6Q_PAD_EIM_D24__UART3_TXD 165 +MX6Q_PAD_EIM_D24__ECSPI1_SS2 166 +MX6Q_PAD_EIM_D24__ECSPI2_SS2 167 +MX6Q_PAD_EIM_D24__GPIO_3_24 168 +MX6Q_PAD_EIM_D24__AUDMUX_AUD5_RXFS 169 +MX6Q_PAD_EIM_D24__UART1_DTR 170 +MX6Q_PAD_EIM_D25__WEIM_WEIM_D_25 171 +MX6Q_PAD_EIM_D25__ECSPI4_SS3 172 +MX6Q_PAD_EIM_D25__UART3_RXD 173 +MX6Q_PAD_EIM_D25__ECSPI1_SS3 174 +MX6Q_PAD_EIM_D25__ECSPI2_SS3 175 +MX6Q_PAD_EIM_D25__GPIO_3_25 176 +MX6Q_PAD_EIM_D25__AUDMUX_AUD5_RXC 177 +MX6Q_PAD_EIM_D25__UART1_DSR 178 +MX6Q_PAD_EIM_D26__WEIM_WEIM_D_26 179 +MX6Q_PAD_EIM_D26__IPU1_DI1_PIN11 180 +MX6Q_PAD_EIM_D26__IPU1_CSI0_D_1 181 +MX6Q_PAD_EIM_D26__IPU2_CSI1_D_14 182 +MX6Q_PAD_EIM_D26__UART2_TXD 183 +MX6Q_PAD_EIM_D26__GPIO_3_26 184 +MX6Q_PAD_EIM_D26__IPU1_SISG_2 185 +MX6Q_PAD_EIM_D26__IPU1_DISP1_DAT_22 186 +MX6Q_PAD_EIM_D27__WEIM_WEIM_D_27 187 +MX6Q_PAD_EIM_D27__IPU1_DI1_PIN13 188 +MX6Q_PAD_EIM_D27__IPU1_CSI0_D_0 189 +MX6Q_PAD_EIM_D27__IPU2_CSI1_D_13 190 +MX6Q_PAD_EIM_D27__UART2_RXD 191 +MX6Q_PAD_EIM_D27__GPIO_3_27 192 +MX6Q_PAD_EIM_D27__IPU1_SISG_3 193 +MX6Q_PAD_EIM_D27__IPU1_DISP1_DAT_23 194 +MX6Q_PAD_EIM_D28__WEIM_WEIM_D_28 195 +MX6Q_PAD_EIM_D28__I2C1_SDA 196 +MX6Q_PAD_EIM_D28__ECSPI4_MOSI 197 +MX6Q_PAD_EIM_D28__IPU2_CSI1_D_12 198 +MX6Q_PAD_EIM_D28__UART2_CTS 199 +MX6Q_PAD_EIM_D28__GPIO_3_28 200 +MX6Q_PAD_EIM_D28__IPU1_EXT_TRIG 201 +MX6Q_PAD_EIM_D28__IPU1_DI0_PIN13 202 +MX6Q_PAD_EIM_D29__WEIM_WEIM_D_29 203 +MX6Q_PAD_EIM_D29__IPU1_DI1_PIN15 204 +MX6Q_PAD_EIM_D29__ECSPI4_SS0 205 +MX6Q_PAD_EIM_D29__UART2_RTS 206 +MX6Q_PAD_EIM_D29__GPIO_3_29 207 +MX6Q_PAD_EIM_D29__IPU2_CSI1_VSYNC 208 +MX6Q_PAD_EIM_D29__IPU1_DI0_PIN14 209 +MX6Q_PAD_EIM_D30__WEIM_WEIM_D_30 210 +MX6Q_PAD_EIM_D30__IPU1_DISP1_DAT_21 211 +MX6Q_PAD_EIM_D30__IPU1_DI0_PIN11 212 +MX6Q_PAD_EIM_D30__IPU1_CSI0_D_3 213 +MX6Q_PAD_EIM_D30__UART3_CTS 214 +MX6Q_PAD_EIM_D30__GPIO_3_30 215 +MX6Q_PAD_EIM_D30__USBOH3_USBH1_OC 216 +MX6Q_PAD_EIM_D30__PL301_PER1_HPROT_0 217 +MX6Q_PAD_EIM_D31__WEIM_WEIM_D_31 218 +MX6Q_PAD_EIM_D31__IPU1_DISP1_DAT_20 219 +MX6Q_PAD_EIM_D31__IPU1_DI0_PIN12 220 +MX6Q_PAD_EIM_D31__IPU1_CSI0_D_2 221 +MX6Q_PAD_EIM_D31__UART3_RTS 222 +MX6Q_PAD_EIM_D31__GPIO_3_31 223 +MX6Q_PAD_EIM_D31__USBOH3_USBH1_PWR 224 +MX6Q_PAD_EIM_D31__PL301_PER1_HPROT_1 225 +MX6Q_PAD_EIM_A24__WEIM_WEIM_A_24 226 +MX6Q_PAD_EIM_A24__IPU1_DISP1_DAT_19 227 +MX6Q_PAD_EIM_A24__IPU2_CSI1_D_19 228 +MX6Q_PAD_EIM_A24__IPU2_SISG_2 229 +MX6Q_PAD_EIM_A24__IPU1_SISG_2 230 +MX6Q_PAD_EIM_A24__GPIO_5_4 231 +MX6Q_PAD_EIM_A24__PL301_PER1_HPROT_2 232 +MX6Q_PAD_EIM_A24__SRC_BT_CFG_24 233 +MX6Q_PAD_EIM_A23__WEIM_WEIM_A_23 234 +MX6Q_PAD_EIM_A23__IPU1_DISP1_DAT_18 235 +MX6Q_PAD_EIM_A23__IPU2_CSI1_D_18 236 +MX6Q_PAD_EIM_A23__IPU2_SISG_3 237 +MX6Q_PAD_EIM_A23__IPU1_SISG_3 238 +MX6Q_PAD_EIM_A23__GPIO_6_6 239 +MX6Q_PAD_EIM_A23__PL301_PER1_HPROT_3 240 +MX6Q_PAD_EIM_A23__SRC_BT_CFG_23 241 +MX6Q_PAD_EIM_A22__WEIM_WEIM_A_22 242 +MX6Q_PAD_EIM_A22__IPU1_DISP1_DAT_17 243 +MX6Q_PAD_EIM_A22__IPU2_CSI1_D_17 244 +MX6Q_PAD_EIM_A22__GPIO_2_16 245 +MX6Q_PAD_EIM_A22__TPSMP_HDATA_0 246 +MX6Q_PAD_EIM_A22__SRC_BT_CFG_22 247 +MX6Q_PAD_EIM_A21__WEIM_WEIM_A_21 248 +MX6Q_PAD_EIM_A21__IPU1_DISP1_DAT_16 249 +MX6Q_PAD_EIM_A21__IPU2_CSI1_D_16 250 +MX6Q_PAD_EIM_A21__RESERVED_RESERVED 251 +MX6Q_PAD_EIM_A21__MIPI_CORE_DPHY_OUT_18 252 +MX6Q_PAD_EIM_A21__GPIO_2_17 253 +MX6Q_PAD_EIM_A21__TPSMP_HDATA_1 254 +MX6Q_PAD_EIM_A21__SRC_BT_CFG_21 255 +MX6Q_PAD_EIM_A20__WEIM_WEIM_A_20 256 +MX6Q_PAD_EIM_A20__IPU1_DISP1_DAT_15 257 +MX6Q_PAD_EIM_A20__IPU2_CSI1_D_15 258 +MX6Q_PAD_EIM_A20__RESERVED_RESERVED 259 +MX6Q_PAD_EIM_A20__MIPI_CORE_DPHY_OUT_19 260 +MX6Q_PAD_EIM_A20__GPIO_2_18 261 +MX6Q_PAD_EIM_A20__TPSMP_HDATA_2 262 +MX6Q_PAD_EIM_A20__SRC_BT_CFG_20 263 +MX6Q_PAD_EIM_A19__WEIM_WEIM_A_19 264 +MX6Q_PAD_EIM_A19__IPU1_DISP1_DAT_14 265 +MX6Q_PAD_EIM_A19__IPU2_CSI1_D_14 266 +MX6Q_PAD_EIM_A19__RESERVED_RESERVED 267 +MX6Q_PAD_EIM_A19__MIPI_CORE_DPHY_OUT_20 268 +MX6Q_PAD_EIM_A19__GPIO_2_19 269 +MX6Q_PAD_EIM_A19__TPSMP_HDATA_3 270 +MX6Q_PAD_EIM_A19__SRC_BT_CFG_19 271 +MX6Q_PAD_EIM_A18__WEIM_WEIM_A_18 272 +MX6Q_PAD_EIM_A18__IPU1_DISP1_DAT_13 273 +MX6Q_PAD_EIM_A18__IPU2_CSI1_D_13 274 +MX6Q_PAD_EIM_A18__RESERVED_RESERVED 275 +MX6Q_PAD_EIM_A18__MIPI_CORE_DPHY_OUT_21 276 +MX6Q_PAD_EIM_A18__GPIO_2_20 277 +MX6Q_PAD_EIM_A18__TPSMP_HDATA_4 278 +MX6Q_PAD_EIM_A18__SRC_BT_CFG_18 279 +MX6Q_PAD_EIM_A17__WEIM_WEIM_A_17 280 +MX6Q_PAD_EIM_A17__IPU1_DISP1_DAT_12 281 +MX6Q_PAD_EIM_A17__IPU2_CSI1_D_12 282 +MX6Q_PAD_EIM_A17__RESERVED_RESERVED 283 +MX6Q_PAD_EIM_A17__MIPI_CORE_DPHY_OUT_22 284 +MX6Q_PAD_EIM_A17__GPIO_2_21 285 +MX6Q_PAD_EIM_A17__TPSMP_HDATA_5 286 +MX6Q_PAD_EIM_A17__SRC_BT_CFG_17 287 +MX6Q_PAD_EIM_A16__WEIM_WEIM_A_16 288 +MX6Q_PAD_EIM_A16__IPU1_DI1_DISP_CLK 289 +MX6Q_PAD_EIM_A16__IPU2_CSI1_PIXCLK 290 +MX6Q_PAD_EIM_A16__MIPI_CORE_DPHY_OUT_23 291 +MX6Q_PAD_EIM_A16__GPIO_2_22 292 +MX6Q_PAD_EIM_A16__TPSMP_HDATA_6 293 +MX6Q_PAD_EIM_A16__SRC_BT_CFG_16 294 +MX6Q_PAD_EIM_CS0__WEIM_WEIM_CS_0 295 +MX6Q_PAD_EIM_CS0__IPU1_DI1_PIN5 296 +MX6Q_PAD_EIM_CS0__ECSPI2_SCLK 297 +MX6Q_PAD_EIM_CS0__MIPI_CORE_DPHY_OUT_24 298 +MX6Q_PAD_EIM_CS0__GPIO_2_23 299 +MX6Q_PAD_EIM_CS0__TPSMP_HDATA_7 300 +MX6Q_PAD_EIM_CS1__WEIM_WEIM_CS_1 301 +MX6Q_PAD_EIM_CS1__IPU1_DI1_PIN6 302 +MX6Q_PAD_EIM_CS1__ECSPI2_MOSI 303 +MX6Q_PAD_EIM_CS1__MIPI_CORE_DPHY_OUT_25 304 +MX6Q_PAD_EIM_CS1__GPIO_2_24 305 +MX6Q_PAD_EIM_CS1__TPSMP_HDATA_8 306 +MX6Q_PAD_EIM_OE__WEIM_WEIM_OE 307 +MX6Q_PAD_EIM_OE__IPU1_DI1_PIN7 308 +MX6Q_PAD_EIM_OE__ECSPI2_MISO 309 +MX6Q_PAD_EIM_OE__MIPI_CORE_DPHY_OUT_26 310 +MX6Q_PAD_EIM_OE__GPIO_2_25 311 +MX6Q_PAD_EIM_OE__TPSMP_HDATA_9 312 +MX6Q_PAD_EIM_RW__WEIM_WEIM_RW 313 +MX6Q_PAD_EIM_RW__IPU1_DI1_PIN8 314 +MX6Q_PAD_EIM_RW__ECSPI2_SS0 315 +MX6Q_PAD_EIM_RW__MIPI_CORE_DPHY_OUT_27 316 +MX6Q_PAD_EIM_RW__GPIO_2_26 317 +MX6Q_PAD_EIM_RW__TPSMP_HDATA_10 318 +MX6Q_PAD_EIM_RW__SRC_BT_CFG_29 319 +MX6Q_PAD_EIM_LBA__WEIM_WEIM_LBA 320 +MX6Q_PAD_EIM_LBA__IPU1_DI1_PIN17 321 +MX6Q_PAD_EIM_LBA__ECSPI2_SS1 322 +MX6Q_PAD_EIM_LBA__GPIO_2_27 323 +MX6Q_PAD_EIM_LBA__TPSMP_HDATA_11 324 +MX6Q_PAD_EIM_LBA__SRC_BT_CFG_26 325 +MX6Q_PAD_EIM_EB0__WEIM_WEIM_EB_0 326 +MX6Q_PAD_EIM_EB0__IPU1_DISP1_DAT_11 327 +MX6Q_PAD_EIM_EB0__IPU2_CSI1_D_11 328 +MX6Q_PAD_EIM_EB0__MIPI_CORE_DPHY_OUT_0 329 +MX6Q_PAD_EIM_EB0__CCM_PMIC_RDY 330 +MX6Q_PAD_EIM_EB0__GPIO_2_28 331 +MX6Q_PAD_EIM_EB0__TPSMP_HDATA_12 332 +MX6Q_PAD_EIM_EB0__SRC_BT_CFG_27 333 +MX6Q_PAD_EIM_EB1__WEIM_WEIM_EB_1 334 +MX6Q_PAD_EIM_EB1__IPU1_DISP1_DAT_10 335 +MX6Q_PAD_EIM_EB1__IPU2_CSI1_D_10 336 +MX6Q_PAD_EIM_EB1__MIPI_CORE_DPHY__OUT_1 337 +MX6Q_PAD_EIM_EB1__GPIO_2_29 338 +MX6Q_PAD_EIM_EB1__TPSMP_HDATA_13 339 +MX6Q_PAD_EIM_EB1__SRC_BT_CFG_28 340 +MX6Q_PAD_EIM_DA0__WEIM_WEIM_DA_A_0 341 +MX6Q_PAD_EIM_DA0__IPU1_DISP1_DAT_9 342 +MX6Q_PAD_EIM_DA0__IPU2_CSI1_D_9 343 +MX6Q_PAD_EIM_DA0__MIPI_CORE_DPHY__OUT_2 344 +MX6Q_PAD_EIM_DA0__GPIO_3_0 345 +MX6Q_PAD_EIM_DA0__TPSMP_HDATA_14 346 +MX6Q_PAD_EIM_DA0__SRC_BT_CFG_0 347 +MX6Q_PAD_EIM_DA1__WEIM_WEIM_DA_A_1 348 +MX6Q_PAD_EIM_DA1__IPU1_DISP1_DAT_8 349 +MX6Q_PAD_EIM_DA1__IPU2_CSI1_D_8 350 +MX6Q_PAD_EIM_DA1__MIPI_CORE_DPHY_OUT_3 351 +MX6Q_PAD_EIM_DA1__USBPHY1_TX_LS_MODE 352 +MX6Q_PAD_EIM_DA1__GPIO_3_1 353 +MX6Q_PAD_EIM_DA1__TPSMP_HDATA_15 354 +MX6Q_PAD_EIM_DA1__SRC_BT_CFG_1 355 +MX6Q_PAD_EIM_DA2__WEIM_WEIM_DA_A_2 356 +MX6Q_PAD_EIM_DA2__IPU1_DISP1_DAT_7 357 +MX6Q_PAD_EIM_DA2__IPU2_CSI1_D_7 358 +MX6Q_PAD_EIM_DA2__MIPI_CORE_DPHY_OUT_4 359 +MX6Q_PAD_EIM_DA2__USBPHY1_TX_HS_MODE 360 +MX6Q_PAD_EIM_DA2__GPIO_3_2 361 +MX6Q_PAD_EIM_DA2__TPSMP_HDATA_16 362 +MX6Q_PAD_EIM_DA2__SRC_BT_CFG_2 363 +MX6Q_PAD_EIM_DA3__WEIM_WEIM_DA_A_3 364 +MX6Q_PAD_EIM_DA3__IPU1_DISP1_DAT_6 365 +MX6Q_PAD_EIM_DA3__IPU2_CSI1_D_6 366 +MX6Q_PAD_EIM_DA3__MIPI_CORE_DPHY_OUT_5 367 +MX6Q_PAD_EIM_DA3__USBPHY1_TX_HIZ 368 +MX6Q_PAD_EIM_DA3__GPIO_3_3 369 +MX6Q_PAD_EIM_DA3__TPSMP_HDATA_17 370 +MX6Q_PAD_EIM_DA3__SRC_BT_CFG_3 371 +MX6Q_PAD_EIM_DA4__WEIM_WEIM_DA_A_4 372 +MX6Q_PAD_EIM_DA4__IPU1_DISP1_DAT_5 373 +MX6Q_PAD_EIM_DA4__IPU2_CSI1_D_5 374 +MX6Q_PAD_EIM_DA4__MIPI_CORE_DPHY_OUT_6 375 +MX6Q_PAD_EIM_DA4__ANATOP_USBPHY1_TX_EN 376 +MX6Q_PAD_EIM_DA4__GPIO_3_4 377 +MX6Q_PAD_EIM_DA4__TPSMP_HDATA_18 378 +MX6Q_PAD_EIM_DA4__SRC_BT_CFG_4 379 +MX6Q_PAD_EIM_DA5__WEIM_WEIM_DA_A_5 380 +MX6Q_PAD_EIM_DA5__IPU1_DISP1_DAT_4 381 +MX6Q_PAD_EIM_DA5__IPU2_CSI1_D_4 382 +MX6Q_PAD_EIM_DA5__MIPI_CORE_DPHY_OUT_7 383 +MX6Q_PAD_EIM_DA5__ANATOP_USBPHY1_TX_DP 384 +MX6Q_PAD_EIM_DA5__GPIO_3_5 385 +MX6Q_PAD_EIM_DA5__TPSMP_HDATA_19 386 +MX6Q_PAD_EIM_DA5__SRC_BT_CFG_5 387 +MX6Q_PAD_EIM_DA6__WEIM_WEIM_DA_A_6 388 +MX6Q_PAD_EIM_DA6__IPU1_DISP1_DAT_3 389 +MX6Q_PAD_EIM_DA6__IPU2_CSI1_D_3 390 +MX6Q_PAD_EIM_DA6__MIPI_CORE_DPHY_OUT_8 391 +MX6Q_PAD_EIM_DA6__ANATOP_USBPHY1_TX_DN 392 +MX6Q_PAD_EIM_DA6__GPIO_3_6 393 +MX6Q_PAD_EIM_DA6__TPSMP_HDATA_20 394 +MX6Q_PAD_EIM_DA6__SRC_BT_CFG_6 395 +MX6Q_PAD_EIM_DA7__WEIM_WEIM_DA_A_7 396 +MX6Q_PAD_EIM_DA7__IPU1_DISP1_DAT_2 397 +MX6Q_PAD_EIM_DA7__IPU2_CSI1_D_2 398 +MX6Q_PAD_EIM_DA7__MIPI_CORE_DPHY_OUT_9 399 +MX6Q_PAD_EIM_DA7__GPIO_3_7 400 +MX6Q_PAD_EIM_DA7__TPSMP_HDATA_21 401 +MX6Q_PAD_EIM_DA7__SRC_BT_CFG_7 402 +MX6Q_PAD_EIM_DA8__WEIM_WEIM_DA_A_8 403 +MX6Q_PAD_EIM_DA8__IPU1_DISP1_DAT_1 404 +MX6Q_PAD_EIM_DA8__IPU2_CSI1_D_1 405 +MX6Q_PAD_EIM_DA8__MIPI_CORE_DPHY_OUT_10 406 +MX6Q_PAD_EIM_DA8__GPIO_3_8 407 +MX6Q_PAD_EIM_DA8__TPSMP_HDATA_22 408 +MX6Q_PAD_EIM_DA8__SRC_BT_CFG_8 409 +MX6Q_PAD_EIM_DA9__WEIM_WEIM_DA_A_9 410 +MX6Q_PAD_EIM_DA9__IPU1_DISP1_DAT_0 411 +MX6Q_PAD_EIM_DA9__IPU2_CSI1_D_0 412 +MX6Q_PAD_EIM_DA9__MIPI_CORE_DPHY_OUT_11 413 +MX6Q_PAD_EIM_DA9__GPIO_3_9 414 +MX6Q_PAD_EIM_DA9__TPSMP_HDATA_23 415 +MX6Q_PAD_EIM_DA9__SRC_BT_CFG_9 416 +MX6Q_PAD_EIM_DA10__WEIM_WEIM_DA_A_10 417 +MX6Q_PAD_EIM_DA10__IPU1_DI1_PIN15 418 +MX6Q_PAD_EIM_DA10__IPU2_CSI1_DATA_EN 419 +MX6Q_PAD_EIM_DA10__MIPI_CORE_DPHY_OUT12 420 +MX6Q_PAD_EIM_DA10__GPIO_3_10 421 +MX6Q_PAD_EIM_DA10__TPSMP_HDATA_24 422 +MX6Q_PAD_EIM_DA10__SRC_BT_CFG_10 423 +MX6Q_PAD_EIM_DA11__WEIM_WEIM_DA_A_11 424 +MX6Q_PAD_EIM_DA11__IPU1_DI1_PIN2 425 +MX6Q_PAD_EIM_DA11__IPU2_CSI1_HSYNC 426 +MX6Q_PAD_EIM_DA11__MIPI_CORE_DPHY_OUT13 427 +MX6Q_PAD_EIM_DA11__SDMA_DBG_EVT_CHN_6 428 +MX6Q_PAD_EIM_DA11__GPIO_3_11 429 +MX6Q_PAD_EIM_DA11__TPSMP_HDATA_25 430 +MX6Q_PAD_EIM_DA11__SRC_BT_CFG_11 431 +MX6Q_PAD_EIM_DA12__WEIM_WEIM_DA_A_12 432 +MX6Q_PAD_EIM_DA12__IPU1_DI1_PIN3 433 +MX6Q_PAD_EIM_DA12__IPU2_CSI1_VSYNC 434 +MX6Q_PAD_EIM_DA12__MIPI_CORE_DPHY_OUT14 435 +MX6Q_PAD_EIM_DA12__SDMA_DEBUG_EVT_CHN_3 436 +MX6Q_PAD_EIM_DA12__GPIO_3_12 437 +MX6Q_PAD_EIM_DA12__TPSMP_HDATA_26 438 +MX6Q_PAD_EIM_DA12__SRC_BT_CFG_12 439 +MX6Q_PAD_EIM_DA13__WEIM_WEIM_DA_A_13 440 +MX6Q_PAD_EIM_DA13__IPU1_DI1_D0_CS 441 +MX6Q_PAD_EIM_DA13__CCM_DI1_EXT_CLK 442 +MX6Q_PAD_EIM_DA13__MIPI_CORE_DPHY_OUT15 443 +MX6Q_PAD_EIM_DA13__SDMA_DEBUG_EVT_CHN_4 444 +MX6Q_PAD_EIM_DA13__GPIO_3_13 445 +MX6Q_PAD_EIM_DA13__TPSMP_HDATA_27 446 +MX6Q_PAD_EIM_DA13__SRC_BT_CFG_13 447 +MX6Q_PAD_EIM_DA14__WEIM_WEIM_DA_A_14 448 +MX6Q_PAD_EIM_DA14__IPU1_DI1_D1_CS 449 +MX6Q_PAD_EIM_DA14__CCM_DI0_EXT_CLK 450 +MX6Q_PAD_EIM_DA14__MIPI_CORE_DPHY_OUT16 451 +MX6Q_PAD_EIM_DA14__SDMA_DEBUG_EVT_CHN_5 452 +MX6Q_PAD_EIM_DA14__GPIO_3_14 453 +MX6Q_PAD_EIM_DA14__TPSMP_HDATA_28 454 +MX6Q_PAD_EIM_DA14__SRC_BT_CFG_14 455 +MX6Q_PAD_EIM_DA15__WEIM_WEIM_DA_A_15 456 +MX6Q_PAD_EIM_DA15__IPU1_DI1_PIN1 457 +MX6Q_PAD_EIM_DA15__IPU1_DI1_PIN4 458 +MX6Q_PAD_EIM_DA15__MIPI_CORE_DPHY_OUT17 459 +MX6Q_PAD_EIM_DA15__GPIO_3_15 460 +MX6Q_PAD_EIM_DA15__TPSMP_HDATA_29 461 +MX6Q_PAD_EIM_DA15__SRC_BT_CFG_15 462 +MX6Q_PAD_EIM_WAIT__WEIM_WEIM_WAIT 463 +MX6Q_PAD_EIM_WAIT__WEIM_WEIM_DTACK_B 464 +MX6Q_PAD_EIM_WAIT__GPIO_5_0 465 +MX6Q_PAD_EIM_WAIT__TPSMP_HDATA_30 466 +MX6Q_PAD_EIM_WAIT__SRC_BT_CFG_25 467 +MX6Q_PAD_EIM_BCLK__WEIM_WEIM_BCLK 468 +MX6Q_PAD_EIM_BCLK__IPU1_DI1_PIN16 469 +MX6Q_PAD_EIM_BCLK__GPIO_6_31 470 +MX6Q_PAD_EIM_BCLK__TPSMP_HDATA_31 471 +MX6Q_PAD_DI0_DISP_CLK__IPU1_DI0_DSP_CLK 472 +MX6Q_PAD_DI0_DISP_CLK__IPU2_DI0_DSP_CLK 473 +MX6Q_PAD_DI0_DISP_CLK__MIPI_CR_DPY_OT28 474 +MX6Q_PAD_DI0_DISP_CLK__SDMA_DBG_CR_STA0 475 +MX6Q_PAD_DI0_DISP_CLK__GPIO_4_16 476 +MX6Q_PAD_DI0_DISP_CLK__MMDC_DEBUG_0 477 +MX6Q_PAD_DI0_PIN15__IPU1_DI0_PIN15 478 +MX6Q_PAD_DI0_PIN15__IPU2_DI0_PIN15 479 +MX6Q_PAD_DI0_PIN15__AUDMUX_AUD6_TXC 480 +MX6Q_PAD_DI0_PIN15__MIPI_CR_DPHY_OUT_29 481 +MX6Q_PAD_DI0_PIN15__SDMA_DBG_CORE_STA_1 482 +MX6Q_PAD_DI0_PIN15__GPIO_4_17 483 +MX6Q_PAD_DI0_PIN15__MMDC_MMDC_DEBUG_1 484 +MX6Q_PAD_DI0_PIN2__IPU1_DI0_PIN2 485 +MX6Q_PAD_DI0_PIN2__IPU2_DI0_PIN2 486 +MX6Q_PAD_DI0_PIN2__AUDMUX_AUD6_TXD 487 +MX6Q_PAD_DI0_PIN2__MIPI_CR_DPHY_OUT_30 488 +MX6Q_PAD_DI0_PIN2__SDMA_DBG_CORE_STA_2 489 +MX6Q_PAD_DI0_PIN2__GPIO_4_18 490 +MX6Q_PAD_DI0_PIN2__MMDC_DEBUG_2 491 +MX6Q_PAD_DI0_PIN2__PL301_PER1_HADDR_9 492 +MX6Q_PAD_DI0_PIN3__IPU1_DI0_PIN3 493 +MX6Q_PAD_DI0_PIN3__IPU2_DI0_PIN3 494 +MX6Q_PAD_DI0_PIN3__AUDMUX_AUD6_TXFS 495 +MX6Q_PAD_DI0_PIN3__MIPI_CORE_DPHY_OUT31 496 +MX6Q_PAD_DI0_PIN3__SDMA_DBG_CORE_STA_3 497 +MX6Q_PAD_DI0_PIN3__GPIO_4_19 498 +MX6Q_PAD_DI0_PIN3__MMDC_MMDC_DEBUG_3 499 +MX6Q_PAD_DI0_PIN3__PL301_PER1_HADDR_10 500 +MX6Q_PAD_DI0_PIN4__IPU1_DI0_PIN4 501 +MX6Q_PAD_DI0_PIN4__IPU2_DI0_PIN4 502 +MX6Q_PAD_DI0_PIN4__AUDMUX_AUD6_RXD 503 +MX6Q_PAD_DI0_PIN4__USDHC1_WP 504 +MX6Q_PAD_DI0_PIN4__SDMA_DEBUG_YIELD 505 +MX6Q_PAD_DI0_PIN4__GPIO_4_20 506 +MX6Q_PAD_DI0_PIN4__MMDC_MMDC_DEBUG_4 507 +MX6Q_PAD_DI0_PIN4__PL301_PER1_HADDR_11 508 +MX6Q_PAD_DISP0_DAT0__IPU1_DISP0_DAT_0 509 +MX6Q_PAD_DISP0_DAT0__IPU2_DISP0_DAT_0 510 +MX6Q_PAD_DISP0_DAT0__ECSPI3_SCLK 511 +MX6Q_PAD_DISP0_DAT0__USDHC1_USDHC_DBG_0 512 +MX6Q_PAD_DISP0_DAT0__SDMA_DBG_CORE_RUN 513 +MX6Q_PAD_DISP0_DAT0__GPIO_4_21 514 +MX6Q_PAD_DISP0_DAT0__MMDC_MMDC_DEBUG_5 515 +MX6Q_PAD_DISP0_DAT1__IPU1_DISP0_DAT_1 516 +MX6Q_PAD_DISP0_DAT1__IPU2_DISP0_DAT_1 517 +MX6Q_PAD_DISP0_DAT1__ECSPI3_MOSI 518 +MX6Q_PAD_DISP0_DAT1__USDHC1_USDHC_DBG_1 519 +MX6Q_PAD_DISP0_DAT1__SDMA_DBG_EVT_CHNSL 520 +MX6Q_PAD_DISP0_DAT1__GPIO_4_22 521 +MX6Q_PAD_DISP0_DAT1__MMDC_DEBUG_6 522 +MX6Q_PAD_DISP0_DAT1__PL301_PER1_HADR_12 523 +MX6Q_PAD_DISP0_DAT2__IPU1_DISP0_DAT_2 524 +MX6Q_PAD_DISP0_DAT2__IPU2_DISP0_DAT_2 525 +MX6Q_PAD_DISP0_DAT2__ECSPI3_MISO 526 +MX6Q_PAD_DISP0_DAT2__USDHC1_USDHC_DBG_2 527 +MX6Q_PAD_DISP0_DAT2__SDMA_DEBUG_MODE 528 +MX6Q_PAD_DISP0_DAT2__GPIO_4_23 529 +MX6Q_PAD_DISP0_DAT2__MMDC_DEBUG_7 530 +MX6Q_PAD_DISP0_DAT2__PL301_PER1_HADR_13 531 +MX6Q_PAD_DISP0_DAT3__IPU1_DISP0_DAT_3 532 +MX6Q_PAD_DISP0_DAT3__IPU2_DISP0_DAT_3 533 +MX6Q_PAD_DISP0_DAT3__ECSPI3_SS0 534 +MX6Q_PAD_DISP0_DAT3__USDHC1_USDHC_DBG_3 535 +MX6Q_PAD_DISP0_DAT3__SDMA_DBG_BUS_ERROR 536 +MX6Q_PAD_DISP0_DAT3__GPIO_4_24 537 +MX6Q_PAD_DISP0_DAT3__MMDC_MMDC_DBG_8 538 +MX6Q_PAD_DISP0_DAT3__PL301_PER1_HADR_14 539 +MX6Q_PAD_DISP0_DAT4__IPU1_DISP0_DAT_4 540 +MX6Q_PAD_DISP0_DAT4__IPU2_DISP0_DAT_4 541 +MX6Q_PAD_DISP0_DAT4__ECSPI3_SS1 542 +MX6Q_PAD_DISP0_DAT4__USDHC1_USDHC_DBG_4 543 +MX6Q_PAD_DISP0_DAT4__SDMA_DEBUG_BUS_RWB 544 +MX6Q_PAD_DISP0_DAT4__GPIO_4_25 545 +MX6Q_PAD_DISP0_DAT4__MMDC_MMDC_DEBUG_9 546 +MX6Q_PAD_DISP0_DAT4__PL301_PER1_HADR_15 547 +MX6Q_PAD_DISP0_DAT5__IPU1_DISP0_DAT_5 548 +MX6Q_PAD_DISP0_DAT5__IPU2_DISP0_DAT_5 549 +MX6Q_PAD_DISP0_DAT5__ECSPI3_SS2 550 +MX6Q_PAD_DISP0_DAT5__AUDMUX_AUD6_RXFS 551 +MX6Q_PAD_DISP0_DAT5__SDMA_DBG_MCH_DMBUS 552 +MX6Q_PAD_DISP0_DAT5__GPIO_4_26 553 +MX6Q_PAD_DISP0_DAT5__MMDC_DEBUG_10 554 +MX6Q_PAD_DISP0_DAT5__PL301_PER1_HADR_16 555 +MX6Q_PAD_DISP0_DAT6__IPU1_DISP0_DAT_6 556 +MX6Q_PAD_DISP0_DAT6__IPU2_DISP0_DAT_6 557 +MX6Q_PAD_DISP0_DAT6__ECSPI3_SS3 558 +MX6Q_PAD_DISP0_DAT6__AUDMUX_AUD6_RXC 559 +MX6Q_PAD_DISP0_DAT6__SDMA_DBG_RTBUF_WRT 560 +MX6Q_PAD_DISP0_DAT6__GPIO_4_27 561 +MX6Q_PAD_DISP0_DAT6__MMDC_DEBUG_11 562 +MX6Q_PAD_DISP0_DAT6__PL301_PER1_HADR_17 563 +MX6Q_PAD_DISP0_DAT7__IPU1_DISP0_DAT_7 564 +MX6Q_PAD_DISP0_DAT7__IPU2_DISP0_DAT_7 565 +MX6Q_PAD_DISP0_DAT7__ECSPI3_RDY 566 +MX6Q_PAD_DISP0_DAT7__USDHC1_USDHC_DBG_5 567 +MX6Q_PAD_DISP0_DAT7__SDMA_DBG_EVT_CHN_0 568 +MX6Q_PAD_DISP0_DAT7__GPIO_4_28 569 +MX6Q_PAD_DISP0_DAT7__MMDC_DEBUG_12 570 +MX6Q_PAD_DISP0_DAT7__PL301_PER1_HADR_18 571 +MX6Q_PAD_DISP0_DAT8__IPU1_DISP0_DAT_8 572 +MX6Q_PAD_DISP0_DAT8__IPU2_DISP0_DAT_8 573 +MX6Q_PAD_DISP0_DAT8__PWM1_PWMO 574 +MX6Q_PAD_DISP0_DAT8__WDOG1_WDOG_B 575 +MX6Q_PAD_DISP0_DAT8__SDMA_DBG_EVT_CHN_1 576 +MX6Q_PAD_DISP0_DAT8__GPIO_4_29 577 +MX6Q_PAD_DISP0_DAT8__MMDC_DEBUG_13 578 +MX6Q_PAD_DISP0_DAT8__PL301_PER1_HADR_19 579 +MX6Q_PAD_DISP0_DAT9__IPU1_DISP0_DAT_9 580 +MX6Q_PAD_DISP0_DAT9__IPU2_DISP0_DAT_9 581 +MX6Q_PAD_DISP0_DAT9__PWM2_PWMO 582 +MX6Q_PAD_DISP0_DAT9__WDOG2_WDOG_B 583 +MX6Q_PAD_DISP0_DAT9__SDMA_DBG_EVT_CHN_2 584 +MX6Q_PAD_DISP0_DAT9__GPIO_4_30 585 +MX6Q_PAD_DISP0_DAT9__MMDC_DEBUG_14 586 +MX6Q_PAD_DISP0_DAT9__PL301_PER1_HADR_20 587 +MX6Q_PAD_DISP0_DAT10__IPU1_DISP0_DAT_10 588 +MX6Q_PAD_DISP0_DAT10__IPU2_DISP0_DAT_10 589 +MX6Q_PAD_DISP0_DAT10__USDHC1_DBG_6 590 +MX6Q_PAD_DISP0_DAT10__SDMA_DBG_EVT_CHN3 591 +MX6Q_PAD_DISP0_DAT10__GPIO_4_31 592 +MX6Q_PAD_DISP0_DAT10__MMDC_DEBUG_15 593 +MX6Q_PAD_DISP0_DAT10__PL301_PER1_HADR21 594 +MX6Q_PAD_DISP0_DAT11__IPU1_DISP0_DAT_11 595 +MX6Q_PAD_DISP0_DAT11__IPU2_DISP0_DAT_11 596 +MX6Q_PAD_DISP0_DAT11__USDHC1_USDHC_DBG7 597 +MX6Q_PAD_DISP0_DAT11__SDMA_DBG_EVT_CHN4 598 +MX6Q_PAD_DISP0_DAT11__GPIO_5_5 599 +MX6Q_PAD_DISP0_DAT11__MMDC_DEBUG_16 600 +MX6Q_PAD_DISP0_DAT11__PL301_PER1_HADR22 601 +MX6Q_PAD_DISP0_DAT12__IPU1_DISP0_DAT_12 602 +MX6Q_PAD_DISP0_DAT12__IPU2_DISP0_DAT_12 603 +MX6Q_PAD_DISP0_DAT12__RESERVED_RESERVED 604 +MX6Q_PAD_DISP0_DAT12__SDMA_DBG_EVT_CHN5 605 +MX6Q_PAD_DISP0_DAT12__GPIO_5_6 606 +MX6Q_PAD_DISP0_DAT12__MMDC_DEBUG_17 607 +MX6Q_PAD_DISP0_DAT12__PL301_PER1_HADR23 608 +MX6Q_PAD_DISP0_DAT13__IPU1_DISP0_DAT_13 609 +MX6Q_PAD_DISP0_DAT13__IPU2_DISP0_DAT_13 610 +MX6Q_PAD_DISP0_DAT13__AUDMUX_AUD5_RXFS 611 +MX6Q_PAD_DISP0_DAT13__SDMA_DBG_EVT_CHN0 612 +MX6Q_PAD_DISP0_DAT13__GPIO_5_7 613 +MX6Q_PAD_DISP0_DAT13__MMDC_DEBUG_18 614 +MX6Q_PAD_DISP0_DAT13__PL301_PER1_HADR24 615 +MX6Q_PAD_DISP0_DAT14__IPU1_DISP0_DAT_14 616 +MX6Q_PAD_DISP0_DAT14__IPU2_DISP0_DAT_14 617 +MX6Q_PAD_DISP0_DAT14__AUDMUX_AUD5_RXC 618 +MX6Q_PAD_DISP0_DAT14__SDMA_DBG_EVT_CHN1 619 +MX6Q_PAD_DISP0_DAT14__GPIO_5_8 620 +MX6Q_PAD_DISP0_DAT14__MMDC_DEBUG_19 621 +MX6Q_PAD_DISP0_DAT15__IPU1_DISP0_DAT_15 622 +MX6Q_PAD_DISP0_DAT15__IPU2_DISP0_DAT_15 623 +MX6Q_PAD_DISP0_DAT15__ECSPI1_SS1 624 +MX6Q_PAD_DISP0_DAT15__ECSPI2_SS1 625 +MX6Q_PAD_DISP0_DAT15__SDMA_DBG_EVT_CHN2 626 +MX6Q_PAD_DISP0_DAT15__GPIO_5_9 627 +MX6Q_PAD_DISP0_DAT15__MMDC_DEBUG_20 628 +MX6Q_PAD_DISP0_DAT15__PL301_PER1_HADR25 629 +MX6Q_PAD_DISP0_DAT16__IPU1_DISP0_DAT_16 630 +MX6Q_PAD_DISP0_DAT16__IPU2_DISP0_DAT_16 631 +MX6Q_PAD_DISP0_DAT16__ECSPI2_MOSI 632 +MX6Q_PAD_DISP0_DAT16__AUDMUX_AUD5_TXC 633 +MX6Q_PAD_DISP0_DAT16__SDMA_EXT_EVENT_0 634 +MX6Q_PAD_DISP0_DAT16__GPIO_5_10 635 +MX6Q_PAD_DISP0_DAT16__MMDC_DEBUG_21 636 +MX6Q_PAD_DISP0_DAT16__PL301_PER1_HADR26 637 +MX6Q_PAD_DISP0_DAT17__IPU1_DISP0_DAT_17 638 +MX6Q_PAD_DISP0_DAT17__IPU2_DISP0_DAT_17 639 +MX6Q_PAD_DISP0_DAT17__ECSPI2_MISO 640 +MX6Q_PAD_DISP0_DAT17__AUDMUX_AUD5_TXD 641 +MX6Q_PAD_DISP0_DAT17__SDMA_EXT_EVENT_1 642 +MX6Q_PAD_DISP0_DAT17__GPIO_5_11 643 +MX6Q_PAD_DISP0_DAT17__MMDC_DEBUG_22 644 +MX6Q_PAD_DISP0_DAT17__PL301_PER1_HADR27 645 +MX6Q_PAD_DISP0_DAT18__IPU1_DISP0_DAT_18 646 +MX6Q_PAD_DISP0_DAT18__IPU2_DISP0_DAT_18 647 +MX6Q_PAD_DISP0_DAT18__ECSPI2_SS0 648 +MX6Q_PAD_DISP0_DAT18__AUDMUX_AUD5_TXFS 649 +MX6Q_PAD_DISP0_DAT18__AUDMUX_AUD4_RXFS 650 +MX6Q_PAD_DISP0_DAT18__GPIO_5_12 651 +MX6Q_PAD_DISP0_DAT18__MMDC_DEBUG_23 652 +MX6Q_PAD_DISP0_DAT18__WEIM_WEIM_CS_2 653 +MX6Q_PAD_DISP0_DAT19__IPU1_DISP0_DAT_19 654 +MX6Q_PAD_DISP0_DAT19__IPU2_DISP0_DAT_19 655 +MX6Q_PAD_DISP0_DAT19__ECSPI2_SCLK 656 +MX6Q_PAD_DISP0_DAT19__AUDMUX_AUD5_RXD 657 +MX6Q_PAD_DISP0_DAT19__AUDMUX_AUD4_RXC 658 +MX6Q_PAD_DISP0_DAT19__GPIO_5_13 659 +MX6Q_PAD_DISP0_DAT19__MMDC_DEBUG_24 660 +MX6Q_PAD_DISP0_DAT19__WEIM_WEIM_CS_3 661 +MX6Q_PAD_DISP0_DAT20__IPU1_DISP0_DAT_20 662 +MX6Q_PAD_DISP0_DAT20__IPU2_DISP0_DAT_20 663 +MX6Q_PAD_DISP0_DAT20__ECSPI1_SCLK 664 +MX6Q_PAD_DISP0_DAT20__AUDMUX_AUD4_TXC 665 +MX6Q_PAD_DISP0_DAT20__SDMA_DBG_EVT_CHN7 666 +MX6Q_PAD_DISP0_DAT20__GPIO_5_14 667 +MX6Q_PAD_DISP0_DAT20__MMDC_DEBUG_25 668 +MX6Q_PAD_DISP0_DAT20__PL301_PER1_HADR28 669 +MX6Q_PAD_DISP0_DAT21__IPU1_DISP0_DAT_21 670 +MX6Q_PAD_DISP0_DAT21__IPU2_DISP0_DAT_21 671 +MX6Q_PAD_DISP0_DAT21__ECSPI1_MOSI 672 +MX6Q_PAD_DISP0_DAT21__AUDMUX_AUD4_TXD 673 +MX6Q_PAD_DISP0_DAT21__SDMA_DBG_BUS_DEV0 674 +MX6Q_PAD_DISP0_DAT21__GPIO_5_15 675 +MX6Q_PAD_DISP0_DAT21__MMDC_DEBUG_26 676 +MX6Q_PAD_DISP0_DAT21__PL301_PER1_HADR29 677 +MX6Q_PAD_DISP0_DAT22__IPU1_DISP0_DAT_22 678 +MX6Q_PAD_DISP0_DAT22__IPU2_DISP0_DAT_22 679 +MX6Q_PAD_DISP0_DAT22__ECSPI1_MISO 680 +MX6Q_PAD_DISP0_DAT22__AUDMUX_AUD4_TXFS 681 +MX6Q_PAD_DISP0_DAT22__SDMA_DBG_BUS_DEV1 682 +MX6Q_PAD_DISP0_DAT22__GPIO_5_16 683 +MX6Q_PAD_DISP0_DAT22__MMDC_DEBUG_27 684 +MX6Q_PAD_DISP0_DAT22__PL301_PER1_HADR30 685 +MX6Q_PAD_DISP0_DAT23__IPU1_DISP0_DAT_23 686 +MX6Q_PAD_DISP0_DAT23__IPU2_DISP0_DAT_23 687 +MX6Q_PAD_DISP0_DAT23__ECSPI1_SS0 688 +MX6Q_PAD_DISP0_DAT23__AUDMUX_AUD4_RXD 689 +MX6Q_PAD_DISP0_DAT23__SDMA_DBG_BUS_DEV2 690 +MX6Q_PAD_DISP0_DAT23__GPIO_5_17 691 +MX6Q_PAD_DISP0_DAT23__MMDC_DEBUG_28 692 +MX6Q_PAD_DISP0_DAT23__PL301_PER1_HADR31 693 +MX6Q_PAD_ENET_MDIO__RESERVED_RESERVED 694 +MX6Q_PAD_ENET_MDIO__ENET_MDIO 695 +MX6Q_PAD_ENET_MDIO__ESAI1_SCKR 696 +MX6Q_PAD_ENET_MDIO__SDMA_DEBUG_BUS_DEV3 697 +MX6Q_PAD_ENET_MDIO__ENET_1588_EVT1_OUT 698 +MX6Q_PAD_ENET_MDIO__GPIO_1_22 699 +MX6Q_PAD_ENET_MDIO__SPDIF_PLOCK 700 +MX6Q_PAD_ENET_REF_CLK__RESERVED_RSRVED 701 +MX6Q_PAD_ENET_REF_CLK__ENET_TX_CLK 702 +MX6Q_PAD_ENET_REF_CLK__ESAI1_FSR 703 +MX6Q_PAD_ENET_REF_CLK__SDMA_DBGBUS_DEV4 704 +MX6Q_PAD_ENET_REF_CLK__GPIO_1_23 705 +MX6Q_PAD_ENET_REF_CLK__SPDIF_SRCLK 706 +MX6Q_PAD_ENET_REF_CLK__USBPHY1_RX_SQH 707 +MX6Q_PAD_ENET_RX_ER__ENET_RX_ER 708 +MX6Q_PAD_ENET_RX_ER__ESAI1_HCKR 709 +MX6Q_PAD_ENET_RX_ER__SPDIF_IN1 710 +MX6Q_PAD_ENET_RX_ER__ENET_1588_EVT2_OUT 711 +MX6Q_PAD_ENET_RX_ER__GPIO_1_24 712 +MX6Q_PAD_ENET_RX_ER__PHY_TDI 713 +MX6Q_PAD_ENET_RX_ER__USBPHY1_RX_HS_RXD 714 +MX6Q_PAD_ENET_CRS_DV__RESERVED_RSRVED 715 +MX6Q_PAD_ENET_CRS_DV__ENET_RX_EN 716 +MX6Q_PAD_ENET_CRS_DV__ESAI1_SCKT 717 +MX6Q_PAD_ENET_CRS_DV__SPDIF_EXTCLK 718 +MX6Q_PAD_ENET_CRS_DV__GPIO_1_25 719 +MX6Q_PAD_ENET_CRS_DV__PHY_TDO 720 +MX6Q_PAD_ENET_CRS_DV__USBPHY1_RX_FS_RXD 721 +MX6Q_PAD_ENET_RXD1__MLB_MLBSIG 722 +MX6Q_PAD_ENET_RXD1__ENET_RDATA_1 723 +MX6Q_PAD_ENET_RXD1__ESAI1_FST 724 +MX6Q_PAD_ENET_RXD1__ENET_1588_EVT3_OUT 725 +MX6Q_PAD_ENET_RXD1__GPIO_1_26 726 +MX6Q_PAD_ENET_RXD1__PHY_TCK 727 +MX6Q_PAD_ENET_RXD1__USBPHY1_RX_DISCON 728 +MX6Q_PAD_ENET_RXD0__OSC32K_32K_OUT 729 +MX6Q_PAD_ENET_RXD0__ENET_RDATA_0 730 +MX6Q_PAD_ENET_RXD0__ESAI1_HCKT 731 +MX6Q_PAD_ENET_RXD0__SPDIF_OUT1 732 +MX6Q_PAD_ENET_RXD0__GPIO_1_27 733 +MX6Q_PAD_ENET_RXD0__PHY_TMS 734 +MX6Q_PAD_ENET_RXD0__USBPHY1_PLL_CK20DIV 735 +MX6Q_PAD_ENET_TX_EN__RESERVED_RSRVED 736 +MX6Q_PAD_ENET_TX_EN__ENET_TX_EN 737 +MX6Q_PAD_ENET_TX_EN__ESAI1_TX3_RX2 738 +MX6Q_PAD_ENET_TX_EN__GPIO_1_28 739 +MX6Q_PAD_ENET_TX_EN__SATA_PHY_TDI 740 +MX6Q_PAD_ENET_TX_EN__USBPHY2_RX_SQH 741 +MX6Q_PAD_ENET_TXD1__MLB_MLBCLK 742 +MX6Q_PAD_ENET_TXD1__ENET_TDATA_1 743 +MX6Q_PAD_ENET_TXD1__ESAI1_TX2_RX3 744 +MX6Q_PAD_ENET_TXD1__ENET_1588_EVENT0_IN 745 +MX6Q_PAD_ENET_TXD1__GPIO_1_29 746 +MX6Q_PAD_ENET_TXD1__SATA_PHY_TDO 747 +MX6Q_PAD_ENET_TXD1__USBPHY2_RX_HS_RXD 748 +MX6Q_PAD_ENET_TXD0__RESERVED_RSRVED 749 +MX6Q_PAD_ENET_TXD0__ENET_TDATA_0 750 +MX6Q_PAD_ENET_TXD0__ESAI1_TX4_RX1 751 +MX6Q_PAD_ENET_TXD0__GPIO_1_30 752 +MX6Q_PAD_ENET_TXD0__SATA_PHY_TCK 753 +MX6Q_PAD_ENET_TXD0__USBPHY2_RX_FS_RXD 754 +MX6Q_PAD_ENET_MDC__MLB_MLBDAT 755 +MX6Q_PAD_ENET_MDC__ENET_MDC 756 +MX6Q_PAD_ENET_MDC__ESAI1_TX5_RX0 757 +MX6Q_PAD_ENET_MDC__ENET_1588_EVENT1_IN 758 +MX6Q_PAD_ENET_MDC__GPIO_1_31 759 +MX6Q_PAD_ENET_MDC__SATA_PHY_TMS 760 +MX6Q_PAD_ENET_MDC__USBPHY2_RX_DISCON 761 +MX6Q_PAD_DRAM_D40__MMDC_DRAM_D_40 762 +MX6Q_PAD_DRAM_D41__MMDC_DRAM_D_41 763 +MX6Q_PAD_DRAM_D42__MMDC_DRAM_D_42 764 +MX6Q_PAD_DRAM_D43__MMDC_DRAM_D_43 765 +MX6Q_PAD_DRAM_D44__MMDC_DRAM_D_44 766 +MX6Q_PAD_DRAM_D45__MMDC_DRAM_D_45 767 +MX6Q_PAD_DRAM_D46__MMDC_DRAM_D_46 768 +MX6Q_PAD_DRAM_D47__MMDC_DRAM_D_47 769 +MX6Q_PAD_DRAM_SDQS5__MMDC_DRAM_SDQS_5 770 +MX6Q_PAD_DRAM_DQM5__MMDC_DRAM_DQM_5 771 +MX6Q_PAD_DRAM_D32__MMDC_DRAM_D_32 772 +MX6Q_PAD_DRAM_D33__MMDC_DRAM_D_33 773 +MX6Q_PAD_DRAM_D34__MMDC_DRAM_D_34 774 +MX6Q_PAD_DRAM_D35__MMDC_DRAM_D_35 775 +MX6Q_PAD_DRAM_D36__MMDC_DRAM_D_36 776 +MX6Q_PAD_DRAM_D37__MMDC_DRAM_D_37 777 +MX6Q_PAD_DRAM_D38__MMDC_DRAM_D_38 778 +MX6Q_PAD_DRAM_D39__MMDC_DRAM_D_39 779 +MX6Q_PAD_DRAM_DQM4__MMDC_DRAM_DQM_4 780 +MX6Q_PAD_DRAM_SDQS4__MMDC_DRAM_SDQS_4 781 +MX6Q_PAD_DRAM_D24__MMDC_DRAM_D_24 782 +MX6Q_PAD_DRAM_D25__MMDC_DRAM_D_25 783 +MX6Q_PAD_DRAM_D26__MMDC_DRAM_D_26 784 +MX6Q_PAD_DRAM_D27__MMDC_DRAM_D_27 785 +MX6Q_PAD_DRAM_D28__MMDC_DRAM_D_28 786 +MX6Q_PAD_DRAM_D29__MMDC_DRAM_D_29 787 +MX6Q_PAD_DRAM_SDQS3__MMDC_DRAM_SDQS_3 788 +MX6Q_PAD_DRAM_D30__MMDC_DRAM_D_30 789 +MX6Q_PAD_DRAM_D31__MMDC_DRAM_D_31 790 +MX6Q_PAD_DRAM_DQM3__MMDC_DRAM_DQM_3 791 +MX6Q_PAD_DRAM_D16__MMDC_DRAM_D_16 792 +MX6Q_PAD_DRAM_D17__MMDC_DRAM_D_17 793 +MX6Q_PAD_DRAM_D18__MMDC_DRAM_D_18 794 +MX6Q_PAD_DRAM_D19__MMDC_DRAM_D_19 795 +MX6Q_PAD_DRAM_D20__MMDC_DRAM_D_20 796 +MX6Q_PAD_DRAM_D21__MMDC_DRAM_D_21 797 +MX6Q_PAD_DRAM_D22__MMDC_DRAM_D_22 798 +MX6Q_PAD_DRAM_SDQS2__MMDC_DRAM_SDQS_2 799 +MX6Q_PAD_DRAM_D23__MMDC_DRAM_D_23 800 +MX6Q_PAD_DRAM_DQM2__MMDC_DRAM_DQM_2 801 +MX6Q_PAD_DRAM_A0__MMDC_DRAM_A_0 802 +MX6Q_PAD_DRAM_A1__MMDC_DRAM_A_1 803 +MX6Q_PAD_DRAM_A2__MMDC_DRAM_A_2 804 +MX6Q_PAD_DRAM_A3__MMDC_DRAM_A_3 805 +MX6Q_PAD_DRAM_A4__MMDC_DRAM_A_4 806 +MX6Q_PAD_DRAM_A5__MMDC_DRAM_A_5 807 +MX6Q_PAD_DRAM_A6__MMDC_DRAM_A_6 808 +MX6Q_PAD_DRAM_A7__MMDC_DRAM_A_7 809 +MX6Q_PAD_DRAM_A8__MMDC_DRAM_A_8 810 +MX6Q_PAD_DRAM_A9__MMDC_DRAM_A_9 811 +MX6Q_PAD_DRAM_A10__MMDC_DRAM_A_10 812 +MX6Q_PAD_DRAM_A11__MMDC_DRAM_A_11 813 +MX6Q_PAD_DRAM_A12__MMDC_DRAM_A_12 814 +MX6Q_PAD_DRAM_A13__MMDC_DRAM_A_13 815 +MX6Q_PAD_DRAM_A14__MMDC_DRAM_A_14 816 +MX6Q_PAD_DRAM_A15__MMDC_DRAM_A_15 817 +MX6Q_PAD_DRAM_CAS__MMDC_DRAM_CAS 818 +MX6Q_PAD_DRAM_CS0__MMDC_DRAM_CS_0 819 +MX6Q_PAD_DRAM_CS1__MMDC_DRAM_CS_1 820 +MX6Q_PAD_DRAM_RAS__MMDC_DRAM_RAS 821 +MX6Q_PAD_DRAM_RESET__MMDC_DRAM_RESET 822 +MX6Q_PAD_DRAM_SDBA0__MMDC_DRAM_SDBA_0 823 +MX6Q_PAD_DRAM_SDBA1__MMDC_DRAM_SDBA_1 824 +MX6Q_PAD_DRAM_SDCLK_0__MMDC_DRAM_SDCLK0 825 +MX6Q_PAD_DRAM_SDBA2__MMDC_DRAM_SDBA_2 826 +MX6Q_PAD_DRAM_SDCKE0__MMDC_DRAM_SDCKE_0 827 +MX6Q_PAD_DRAM_SDCLK_1__MMDC_DRAM_SDCLK1 828 +MX6Q_PAD_DRAM_SDCKE1__MMDC_DRAM_SDCKE_1 829 +MX6Q_PAD_DRAM_SDODT0__MMDC_DRAM_ODT_0 830 +MX6Q_PAD_DRAM_SDODT1__MMDC_DRAM_ODT_1 831 +MX6Q_PAD_DRAM_SDWE__MMDC_DRAM_SDWE 832 +MX6Q_PAD_DRAM_D0__MMDC_DRAM_D_0 833 +MX6Q_PAD_DRAM_D1__MMDC_DRAM_D_1 834 +MX6Q_PAD_DRAM_D2__MMDC_DRAM_D_2 835 +MX6Q_PAD_DRAM_D3__MMDC_DRAM_D_3 836 +MX6Q_PAD_DRAM_D4__MMDC_DRAM_D_4 837 +MX6Q_PAD_DRAM_D5__MMDC_DRAM_D_5 838 +MX6Q_PAD_DRAM_SDQS0__MMDC_DRAM_SDQS_0 839 +MX6Q_PAD_DRAM_D6__MMDC_DRAM_D_6 840 +MX6Q_PAD_DRAM_D7__MMDC_DRAM_D_7 841 +MX6Q_PAD_DRAM_DQM0__MMDC_DRAM_DQM_0 842 +MX6Q_PAD_DRAM_D8__MMDC_DRAM_D_8 843 +MX6Q_PAD_DRAM_D9__MMDC_DRAM_D_9 844 +MX6Q_PAD_DRAM_D10__MMDC_DRAM_D_10 845 +MX6Q_PAD_DRAM_D11__MMDC_DRAM_D_11 846 +MX6Q_PAD_DRAM_D12__MMDC_DRAM_D_12 847 +MX6Q_PAD_DRAM_D13__MMDC_DRAM_D_13 848 +MX6Q_PAD_DRAM_D14__MMDC_DRAM_D_14 849 +MX6Q_PAD_DRAM_SDQS1__MMDC_DRAM_SDQS_1 850 +MX6Q_PAD_DRAM_D15__MMDC_DRAM_D_15 851 +MX6Q_PAD_DRAM_DQM1__MMDC_DRAM_DQM_1 852 +MX6Q_PAD_DRAM_D48__MMDC_DRAM_D_48 853 +MX6Q_PAD_DRAM_D49__MMDC_DRAM_D_49 854 +MX6Q_PAD_DRAM_D50__MMDC_DRAM_D_50 855 +MX6Q_PAD_DRAM_D51__MMDC_DRAM_D_51 856 +MX6Q_PAD_DRAM_D52__MMDC_DRAM_D_52 857 +MX6Q_PAD_DRAM_D53__MMDC_DRAM_D_53 858 +MX6Q_PAD_DRAM_D54__MMDC_DRAM_D_54 859 +MX6Q_PAD_DRAM_D55__MMDC_DRAM_D_55 860 +MX6Q_PAD_DRAM_SDQS6__MMDC_DRAM_SDQS_6 861 +MX6Q_PAD_DRAM_DQM6__MMDC_DRAM_DQM_6 862 +MX6Q_PAD_DRAM_D56__MMDC_DRAM_D_56 863 +MX6Q_PAD_DRAM_SDQS7__MMDC_DRAM_SDQS_7 864 +MX6Q_PAD_DRAM_D57__MMDC_DRAM_D_57 865 +MX6Q_PAD_DRAM_D58__MMDC_DRAM_D_58 866 +MX6Q_PAD_DRAM_D59__MMDC_DRAM_D_59 867 +MX6Q_PAD_DRAM_D60__MMDC_DRAM_D_60 868 +MX6Q_PAD_DRAM_DQM7__MMDC_DRAM_DQM_7 869 +MX6Q_PAD_DRAM_D61__MMDC_DRAM_D_61 870 +MX6Q_PAD_DRAM_D62__MMDC_DRAM_D_62 871 +MX6Q_PAD_DRAM_D63__MMDC_DRAM_D_63 872 +MX6Q_PAD_KEY_COL0__ECSPI1_SCLK 873 +MX6Q_PAD_KEY_COL0__ENET_RDATA_3 874 +MX6Q_PAD_KEY_COL0__AUDMUX_AUD5_TXC 875 +MX6Q_PAD_KEY_COL0__KPP_COL_0 876 +MX6Q_PAD_KEY_COL0__UART4_TXD 877 +MX6Q_PAD_KEY_COL0__GPIO_4_6 878 +MX6Q_PAD_KEY_COL0__DCIC1_DCIC_OUT 879 +MX6Q_PAD_KEY_COL0__SRC_ANY_PU_RST 880 +MX6Q_PAD_KEY_ROW0__ECSPI1_MOSI 881 +MX6Q_PAD_KEY_ROW0__ENET_TDATA_3 882 +MX6Q_PAD_KEY_ROW0__AUDMUX_AUD5_TXD 883 +MX6Q_PAD_KEY_ROW0__KPP_ROW_0 884 +MX6Q_PAD_KEY_ROW0__UART4_RXD 885 +MX6Q_PAD_KEY_ROW0__GPIO_4_7 886 +MX6Q_PAD_KEY_ROW0__DCIC2_DCIC_OUT 887 +MX6Q_PAD_KEY_ROW0__PL301_PER1_HADR_0 888 +MX6Q_PAD_KEY_COL1__ECSPI1_MISO 889 +MX6Q_PAD_KEY_COL1__ENET_MDIO 890 +MX6Q_PAD_KEY_COL1__AUDMUX_AUD5_TXFS 891 +MX6Q_PAD_KEY_COL1__KPP_COL_1 892 +MX6Q_PAD_KEY_COL1__UART5_TXD 893 +MX6Q_PAD_KEY_COL1__GPIO_4_8 894 +MX6Q_PAD_KEY_COL1__USDHC1_VSELECT 895 +MX6Q_PAD_KEY_COL1__PL301MX_PER1_HADR_1 896 +MX6Q_PAD_KEY_ROW1__ECSPI1_SS0 897 +MX6Q_PAD_KEY_ROW1__ENET_COL 898 +MX6Q_PAD_KEY_ROW1__AUDMUX_AUD5_RXD 899 +MX6Q_PAD_KEY_ROW1__KPP_ROW_1 900 +MX6Q_PAD_KEY_ROW1__UART5_RXD 901 +MX6Q_PAD_KEY_ROW1__GPIO_4_9 902 +MX6Q_PAD_KEY_ROW1__USDHC2_VSELECT 903 +MX6Q_PAD_KEY_ROW1__PL301_PER1_HADDR_2 904 +MX6Q_PAD_KEY_COL2__ECSPI1_SS1 905 +MX6Q_PAD_KEY_COL2__ENET_RDATA_2 906 +MX6Q_PAD_KEY_COL2__CAN1_TXCAN 907 +MX6Q_PAD_KEY_COL2__KPP_COL_2 908 +MX6Q_PAD_KEY_COL2__ENET_MDC 909 +MX6Q_PAD_KEY_COL2__GPIO_4_10 910 +MX6Q_PAD_KEY_COL2__USBOH3_H1_PWRCTL_WKP 911 +MX6Q_PAD_KEY_COL2__PL301_PER1_HADDR_3 912 +MX6Q_PAD_KEY_ROW2__ECSPI1_SS2 913 +MX6Q_PAD_KEY_ROW2__ENET_TDATA_2 914 +MX6Q_PAD_KEY_ROW2__CAN1_RXCAN 915 +MX6Q_PAD_KEY_ROW2__KPP_ROW_2 916 +MX6Q_PAD_KEY_ROW2__USDHC2_VSELECT 917 +MX6Q_PAD_KEY_ROW2__GPIO_4_11 918 +MX6Q_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 919 +MX6Q_PAD_KEY_ROW2__PL301_PER1_HADR_4 920 +MX6Q_PAD_KEY_COL3__ECSPI1_SS3 921 +MX6Q_PAD_KEY_COL3__ENET_CRS 922 +MX6Q_PAD_KEY_COL3__HDMI_TX_DDC_SCL 923 +MX6Q_PAD_KEY_COL3__KPP_COL_3 924 +MX6Q_PAD_KEY_COL3__I2C2_SCL 925 +MX6Q_PAD_KEY_COL3__GPIO_4_12 926 +MX6Q_PAD_KEY_COL3__SPDIF_IN1 927 +MX6Q_PAD_KEY_COL3__PL301_PER1_HADR_5 928 +MX6Q_PAD_KEY_ROW3__OSC32K_32K_OUT 929 +MX6Q_PAD_KEY_ROW3__ASRC_ASRC_EXT_CLK 930 +MX6Q_PAD_KEY_ROW3__HDMI_TX_DDC_SDA 931 +MX6Q_PAD_KEY_ROW3__KPP_ROW_3 932 +MX6Q_PAD_KEY_ROW3__I2C2_SDA 933 +MX6Q_PAD_KEY_ROW3__GPIO_4_13 934 +MX6Q_PAD_KEY_ROW3__USDHC1_VSELECT 935 +MX6Q_PAD_KEY_ROW3__PL301_PER1_HADR_6 936 +MX6Q_PAD_KEY_COL4__CAN2_TXCAN 937 +MX6Q_PAD_KEY_COL4__IPU1_SISG_4 938 +MX6Q_PAD_KEY_COL4__USBOH3_USBOTG_OC 939 +MX6Q_PAD_KEY_COL4__KPP_COL_4 940 +MX6Q_PAD_KEY_COL4__UART5_RTS 941 +MX6Q_PAD_KEY_COL4__GPIO_4_14 942 +MX6Q_PAD_KEY_COL4__MMDC_DEBUG_49 943 +MX6Q_PAD_KEY_COL4__PL301_PER1_HADDR_7 944 +MX6Q_PAD_KEY_ROW4__CAN2_RXCAN 945 +MX6Q_PAD_KEY_ROW4__IPU1_SISG_5 946 +MX6Q_PAD_KEY_ROW4__USBOH3_USBOTG_PWR 947 +MX6Q_PAD_KEY_ROW4__KPP_ROW_4 948 +MX6Q_PAD_KEY_ROW4__UART5_CTS 949 +MX6Q_PAD_KEY_ROW4__GPIO_4_15 950 +MX6Q_PAD_KEY_ROW4__MMDC_DEBUG_50 951 +MX6Q_PAD_KEY_ROW4__PL301_PER1_HADR_8 952 +MX6Q_PAD_GPIO_0__CCM_CLKO 953 +MX6Q_PAD_GPIO_0__KPP_COL_5 954 +MX6Q_PAD_GPIO_0__ASRC_ASRC_EXT_CLK 955 +MX6Q_PAD_GPIO_0__EPIT1_EPITO 956 +MX6Q_PAD_GPIO_0__GPIO_1_0 957 +MX6Q_PAD_GPIO_0__USBOH3_USBH1_PWR 958 +MX6Q_PAD_GPIO_0__SNVS_HP_WRAP_SNVS_VIO5 959 +MX6Q_PAD_GPIO_1__ESAI1_SCKR 960 +MX6Q_PAD_GPIO_1__WDOG2_WDOG_B 961 +MX6Q_PAD_GPIO_1__KPP_ROW_5 962 +MX6Q_PAD_GPIO_1__PWM2_PWMO 963 +MX6Q_PAD_GPIO_1__GPIO_1_1 964 +MX6Q_PAD_GPIO_1__USDHC1_CD 965 +MX6Q_PAD_GPIO_1__SRC_TESTER_ACK 966 +MX6Q_PAD_GPIO_9__ESAI1_FSR 967 +MX6Q_PAD_GPIO_9__WDOG1_WDOG_B 968 +MX6Q_PAD_GPIO_9__KPP_COL_6 969 +MX6Q_PAD_GPIO_9__CCM_REF_EN_B 970 +MX6Q_PAD_GPIO_9__PWM1_PWMO 971 +MX6Q_PAD_GPIO_9__GPIO_1_9 972 +MX6Q_PAD_GPIO_9__USDHC1_WP 973 +MX6Q_PAD_GPIO_9__SRC_EARLY_RST 974 +MX6Q_PAD_GPIO_3__ESAI1_HCKR 975 +MX6Q_PAD_GPIO_3__OBSERVE_MUX_INT_OUT0 976 +MX6Q_PAD_GPIO_3__I2C3_SCL 977 +MX6Q_PAD_GPIO_3__ANATOP_24M_OUT 978 +MX6Q_PAD_GPIO_3__CCM_CLKO2 979 +MX6Q_PAD_GPIO_3__GPIO_1_3 980 +MX6Q_PAD_GPIO_3__USBOH3_USBH1_OC 981 +MX6Q_PAD_GPIO_3__MLB_MLBCLK 982 +MX6Q_PAD_GPIO_6__ESAI1_SCKT 983 +MX6Q_PAD_GPIO_6__OBSERVE_MUX_INT_OUT1 984 +MX6Q_PAD_GPIO_6__I2C3_SDA 985 +MX6Q_PAD_GPIO_6__CCM_CCM_OUT_0 986 +MX6Q_PAD_GPIO_6__CSU_CSU_INT_DEB 987 +MX6Q_PAD_GPIO_6__GPIO_1_6 988 +MX6Q_PAD_GPIO_6__USDHC2_LCTL 989 +MX6Q_PAD_GPIO_6__MLB_MLBSIG 990 +MX6Q_PAD_GPIO_2__ESAI1_FST 991 +MX6Q_PAD_GPIO_2__OBSERVE_MUX_INT_OUT2 992 +MX6Q_PAD_GPIO_2__KPP_ROW_6 993 +MX6Q_PAD_GPIO_2__CCM_CCM_OUT_1 994 +MX6Q_PAD_GPIO_2__CSU_CSU_ALARM_AUT_0 995 +MX6Q_PAD_GPIO_2__GPIO_1_2 996 +MX6Q_PAD_GPIO_2__USDHC2_WP 997 +MX6Q_PAD_GPIO_2__MLB_MLBDAT 998 +MX6Q_PAD_GPIO_4__ESAI1_HCKT 999 +MX6Q_PAD_GPIO_4__OBSERVE_MUX_INT_OUT3 1000 +MX6Q_PAD_GPIO_4__KPP_COL_7 1001 +MX6Q_PAD_GPIO_4__CCM_CCM_OUT_2 1002 +MX6Q_PAD_GPIO_4__CSU_CSU_ALARM_AUT_1 1003 +MX6Q_PAD_GPIO_4__GPIO_1_4 1004 +MX6Q_PAD_GPIO_4__USDHC2_CD 1005 +MX6Q_PAD_GPIO_4__OCOTP_CRL_WRAR_FUSE_LA 1006 +MX6Q_PAD_GPIO_5__ESAI1_TX2_RX3 1007 +MX6Q_PAD_GPIO_5__OBSERVE_MUX_INT_OUT4 1008 +MX6Q_PAD_GPIO_5__KPP_ROW_7 1009 +MX6Q_PAD_GPIO_5__CCM_CLKO 1010 +MX6Q_PAD_GPIO_5__CSU_CSU_ALARM_AUT_2 1011 +MX6Q_PAD_GPIO_5__GPIO_1_5 1012 +MX6Q_PAD_GPIO_5__I2C3_SCL 1013 +MX6Q_PAD_GPIO_5__CHEETAH_EVENTI 1014 +MX6Q_PAD_GPIO_7__ESAI1_TX4_RX1 1015 +MX6Q_PAD_GPIO_7__ECSPI5_RDY 1016 +MX6Q_PAD_GPIO_7__EPIT1_EPITO 1017 +MX6Q_PAD_GPIO_7__CAN1_TXCAN 1018 +MX6Q_PAD_GPIO_7__UART2_TXD 1019 +MX6Q_PAD_GPIO_7__GPIO_1_7 1020 +MX6Q_PAD_GPIO_7__SPDIF_PLOCK 1021 +MX6Q_PAD_GPIO_7__USBOH3_OTGUSB_HST_MODE 1022 +MX6Q_PAD_GPIO_8__ESAI1_TX5_RX0 1023 +MX6Q_PAD_GPIO_8__ANATOP_ANATOP_32K_OUT 1024 +MX6Q_PAD_GPIO_8__EPIT2_EPITO 1025 +MX6Q_PAD_GPIO_8__CAN1_RXCAN 1026 +MX6Q_PAD_GPIO_8__UART2_RXD 1027 +MX6Q_PAD_GPIO_8__GPIO_1_8 1028 +MX6Q_PAD_GPIO_8__SPDIF_SRCLK 1029 +MX6Q_PAD_GPIO_8__USBOH3_OTG_PWRCTL_WAK 1030 +MX6Q_PAD_GPIO_16__ESAI1_TX3_RX2 1031 +MX6Q_PAD_GPIO_16__ENET_1588_EVENT2_IN 1032 +MX6Q_PAD_GPIO_16__ENET_ETHERNET_REF_OUT 1033 +MX6Q_PAD_GPIO_16__USDHC1_LCTL 1034 +MX6Q_PAD_GPIO_16__SPDIF_IN1 1035 +MX6Q_PAD_GPIO_16__GPIO_7_11 1036 +MX6Q_PAD_GPIO_16__I2C3_SDA 1037 +MX6Q_PAD_GPIO_16__SJC_DE_B 1038 +MX6Q_PAD_GPIO_17__ESAI1_TX0 1039 +MX6Q_PAD_GPIO_17__ENET_1588_EVENT3_IN 1040 +MX6Q_PAD_GPIO_17__CCM_PMIC_RDY 1041 +MX6Q_PAD_GPIO_17__SDMA_SDMA_EXT_EVENT_0 1042 +MX6Q_PAD_GPIO_17__SPDIF_OUT1 1043 +MX6Q_PAD_GPIO_17__GPIO_7_12 1044 +MX6Q_PAD_GPIO_17__SJC_JTAG_ACT 1045 +MX6Q_PAD_GPIO_18__ESAI1_TX1 1046 +MX6Q_PAD_GPIO_18__ENET_RX_CLK 1047 +MX6Q_PAD_GPIO_18__USDHC3_VSELECT 1048 +MX6Q_PAD_GPIO_18__SDMA_SDMA_EXT_EVENT_1 1049 +MX6Q_PAD_GPIO_18__ASRC_ASRC_EXT_CLK 1050 +MX6Q_PAD_GPIO_18__GPIO_7_13 1051 +MX6Q_PAD_GPIO_18__SNVS_HP_WRA_SNVS_VIO5 1052 +MX6Q_PAD_GPIO_18__SRC_SYSTEM_RST 1053 +MX6Q_PAD_GPIO_19__KPP_COL_5 1054 +MX6Q_PAD_GPIO_19__ENET_1588_EVENT0_OUT 1055 +MX6Q_PAD_GPIO_19__SPDIF_OUT1 1056 +MX6Q_PAD_GPIO_19__CCM_CLKO 1057 +MX6Q_PAD_GPIO_19__ECSPI1_RDY 1058 +MX6Q_PAD_GPIO_19__GPIO_4_5 1059 +MX6Q_PAD_GPIO_19__ENET_TX_ER 1060 +MX6Q_PAD_GPIO_19__SRC_INT_BOOT 1061 +MX6Q_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK 1062 +MX6Q_PAD_CSI0_PIXCLK__PCIE_CTRL_MUX_12 1063 +MX6Q_PAD_CSI0_PIXCLK__SDMA_DEBUG_PC_0 1064 +MX6Q_PAD_CSI0_PIXCLK__GPIO_5_18 1065 +MX6Q_PAD_CSI0_PIXCLK___MMDC_DEBUG_29 1066 +MX6Q_PAD_CSI0_PIXCLK__CHEETAH_EVENTO 1067 +MX6Q_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC 1068 +MX6Q_PAD_CSI0_MCLK__PCIE_CTRL_MUX_13 1069 +MX6Q_PAD_CSI0_MCLK__CCM_CLKO 1070 +MX6Q_PAD_CSI0_MCLK__SDMA_DEBUG_PC_1 1071 +MX6Q_PAD_CSI0_MCLK__GPIO_5_19 1072 +MX6Q_PAD_CSI0_MCLK__MMDC_MMDC_DEBUG_30 1073 +MX6Q_PAD_CSI0_MCLK__CHEETAH_TRCTL 1074 +MX6Q_PAD_CSI0_DATA_EN__IPU1_CSI0_DA_EN 1075 +MX6Q_PAD_CSI0_DATA_EN__WEIM_WEIM_D_0 1076 +MX6Q_PAD_CSI0_DATA_EN__PCIE_CTRL_MUX_14 1077 +MX6Q_PAD_CSI0_DATA_EN__SDMA_DEBUG_PC_2 1078 +MX6Q_PAD_CSI0_DATA_EN__GPIO_5_20 1079 +MX6Q_PAD_CSI0_DATA_EN__MMDC_DEBUG_31 1080 +MX6Q_PAD_CSI0_DATA_EN__CHEETAH_TRCLK 1081 +MX6Q_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC 1082 +MX6Q_PAD_CSI0_VSYNC__WEIM_WEIM_D_1 1083 +MX6Q_PAD_CSI0_VSYNC__PCIE_CTRL_MUX_15 1084 +MX6Q_PAD_CSI0_VSYNC__SDMA_DEBUG_PC_3 1085 +MX6Q_PAD_CSI0_VSYNC__GPIO_5_21 1086 +MX6Q_PAD_CSI0_VSYNC__MMDC_DEBUG_32 1087 +MX6Q_PAD_CSI0_VSYNC__CHEETAH_TRACE_0 1088 +MX6Q_PAD_CSI0_DAT4__IPU1_CSI0_D_4 1089 +MX6Q_PAD_CSI0_DAT4__WEIM_WEIM_D_2 1090 +MX6Q_PAD_CSI0_DAT4__ECSPI1_SCLK 1091 +MX6Q_PAD_CSI0_DAT4__KPP_COL_5 1092 +MX6Q_PAD_CSI0_DAT4__AUDMUX_AUD3_TXC 1093 +MX6Q_PAD_CSI0_DAT4__GPIO_5_22 1094 +MX6Q_PAD_CSI0_DAT4__MMDC_DEBUG_43 1095 +MX6Q_PAD_CSI0_DAT4__CHEETAH_TRACE_1 1096 +MX6Q_PAD_CSI0_DAT5__IPU1_CSI0_D_5 1097 +MX6Q_PAD_CSI0_DAT5__WEIM_WEIM_D_3 1098 +MX6Q_PAD_CSI0_DAT5__ECSPI1_MOSI 1099 +MX6Q_PAD_CSI0_DAT5__KPP_ROW_5 1100 +MX6Q_PAD_CSI0_DAT5__AUDMUX_AUD3_TXD 1101 +MX6Q_PAD_CSI0_DAT5__GPIO_5_23 1102 +MX6Q_PAD_CSI0_DAT5__MMDC_MMDC_DEBUG_44 1103 +MX6Q_PAD_CSI0_DAT5__CHEETAH_TRACE_2 1104 +MX6Q_PAD_CSI0_DAT6__IPU1_CSI0_D_6 1105 +MX6Q_PAD_CSI0_DAT6__WEIM_WEIM_D_4 1106 +MX6Q_PAD_CSI0_DAT6__ECSPI1_MISO 1107 +MX6Q_PAD_CSI0_DAT6__KPP_COL_6 1108 +MX6Q_PAD_CSI0_DAT6__AUDMUX_AUD3_TXFS 1109 +MX6Q_PAD_CSI0_DAT6__GPIO_5_24 1110 +MX6Q_PAD_CSI0_DAT6__MMDC_MMDC_DEBUG_45 1111 +MX6Q_PAD_CSI0_DAT6__CHEETAH_TRACE_3 1112 +MX6Q_PAD_CSI0_DAT7__IPU1_CSI0_D_7 1113 +MX6Q_PAD_CSI0_DAT7__WEIM_WEIM_D_5 1114 +MX6Q_PAD_CSI0_DAT7__ECSPI1_SS0 1115 +MX6Q_PAD_CSI0_DAT7__KPP_ROW_6 1116 +MX6Q_PAD_CSI0_DAT7__AUDMUX_AUD3_RXD 1117 +MX6Q_PAD_CSI0_DAT7__GPIO_5_25 1118 +MX6Q_PAD_CSI0_DAT7__MMDC_MMDC_DEBUG_46 1119 +MX6Q_PAD_CSI0_DAT7__CHEETAH_TRACE_4 1120 +MX6Q_PAD_CSI0_DAT8__IPU1_CSI0_D_8 1121 +MX6Q_PAD_CSI0_DAT8__WEIM_WEIM_D_6 1122 +MX6Q_PAD_CSI0_DAT8__ECSPI2_SCLK 1123 +MX6Q_PAD_CSI0_DAT8__KPP_COL_7 1124 +MX6Q_PAD_CSI0_DAT8__I2C1_SDA 1125 +MX6Q_PAD_CSI0_DAT8__GPIO_5_26 1126 +MX6Q_PAD_CSI0_DAT8__MMDC_MMDC_DEBUG_47 1127 +MX6Q_PAD_CSI0_DAT8__CHEETAH_TRACE_5 1128 +MX6Q_PAD_CSI0_DAT9__IPU1_CSI0_D_9 1129 +MX6Q_PAD_CSI0_DAT9__WEIM_WEIM_D_7 1130 +MX6Q_PAD_CSI0_DAT9__ECSPI2_MOSI 1131 +MX6Q_PAD_CSI0_DAT9__KPP_ROW_7 1132 +MX6Q_PAD_CSI0_DAT9__I2C1_SCL 1133 +MX6Q_PAD_CSI0_DAT9__GPIO_5_27 1134 +MX6Q_PAD_CSI0_DAT9__MMDC_MMDC_DEBUG_48 1135 +MX6Q_PAD_CSI0_DAT9__CHEETAH_TRACE_6 1136 +MX6Q_PAD_CSI0_DAT10__IPU1_CSI0_D_10 1137 +MX6Q_PAD_CSI0_DAT10__AUDMUX_AUD3_RXC 1138 +MX6Q_PAD_CSI0_DAT10__ECSPI2_MISO 1139 +MX6Q_PAD_CSI0_DAT10__UART1_TXD 1140 +MX6Q_PAD_CSI0_DAT10__SDMA_DEBUG_PC_4 1141 +MX6Q_PAD_CSI0_DAT10__GPIO_5_28 1142 +MX6Q_PAD_CSI0_DAT10__MMDC_MMDC_DEBUG_33 1143 +MX6Q_PAD_CSI0_DAT10__CHEETAH_TRACE_7 1144 +MX6Q_PAD_CSI0_DAT11__IPU1_CSI0_D_11 1145 +MX6Q_PAD_CSI0_DAT11__AUDMUX_AUD3_RXFS 1146 +MX6Q_PAD_CSI0_DAT11__ECSPI2_SS0 1147 +MX6Q_PAD_CSI0_DAT11__UART1_RXD 1148 +MX6Q_PAD_CSI0_DAT11__SDMA_DEBUG_PC_5 1149 +MX6Q_PAD_CSI0_DAT11__GPIO_5_29 1150 +MX6Q_PAD_CSI0_DAT11__MMDC_MMDC_DEBUG_34 1151 +MX6Q_PAD_CSI0_DAT11__CHEETAH_TRACE_8 1152 +MX6Q_PAD_CSI0_DAT12__IPU1_CSI0_D_12 1153 +MX6Q_PAD_CSI0_DAT12__WEIM_WEIM_D_8 1154 +MX6Q_PAD_CSI0_DAT12__PCIE_CTRL_MUX_16 1155 +MX6Q_PAD_CSI0_DAT12__UART4_TXD 1156 +MX6Q_PAD_CSI0_DAT12__SDMA_DEBUG_PC_6 1157 +MX6Q_PAD_CSI0_DAT12__GPIO_5_30 1158 +MX6Q_PAD_CSI0_DAT12__MMDC_MMDC_DEBUG_35 1159 +MX6Q_PAD_CSI0_DAT12__CHEETAH_TRACE_9 1160 +MX6Q_PAD_CSI0_DAT13__IPU1_CSI0_D_13 1161 +MX6Q_PAD_CSI0_DAT13__WEIM_WEIM_D_9 1162 +MX6Q_PAD_CSI0_DAT13__PCIE_CTRL_MUX_17 1163 +MX6Q_PAD_CSI0_DAT13__UART4_RXD 1164 +MX6Q_PAD_CSI0_DAT13__SDMA_DEBUG_PC_7 1165 +MX6Q_PAD_CSI0_DAT13__GPIO_5_31 1166 +MX6Q_PAD_CSI0_DAT13__MMDC_MMDC_DEBUG_36 1167 +MX6Q_PAD_CSI0_DAT13__CHEETAH_TRACE_10 1168 +MX6Q_PAD_CSI0_DAT14__IPU1_CSI0_D_14 1169 +MX6Q_PAD_CSI0_DAT14__WEIM_WEIM_D_10 1170 +MX6Q_PAD_CSI0_DAT14__PCIE_CTRL_MUX_18 1171 +MX6Q_PAD_CSI0_DAT14__UART5_TXD 1172 +MX6Q_PAD_CSI0_DAT14__SDMA_DEBUG_PC_8 1173 +MX6Q_PAD_CSI0_DAT14__GPIO_6_0 1174 +MX6Q_PAD_CSI0_DAT14__MMDC_MMDC_DEBUG_37 1175 +MX6Q_PAD_CSI0_DAT14__CHEETAH_TRACE_11 1176 +MX6Q_PAD_CSI0_DAT15__IPU1_CSI0_D_15 1177 +MX6Q_PAD_CSI0_DAT15__WEIM_WEIM_D_11 1178 +MX6Q_PAD_CSI0_DAT15__PCIE_CTRL_MUX_19 1179 +MX6Q_PAD_CSI0_DAT15__UART5_RXD 1180 +MX6Q_PAD_CSI0_DAT15__SDMA_DEBUG_PC_9 1181 +MX6Q_PAD_CSI0_DAT15__GPIO_6_1 1182 +MX6Q_PAD_CSI0_DAT15__MMDC_MMDC_DEBUG_38 1183 +MX6Q_PAD_CSI0_DAT15__CHEETAH_TRACE_12 1184 +MX6Q_PAD_CSI0_DAT16__IPU1_CSI0_D_16 1185 +MX6Q_PAD_CSI0_DAT16__WEIM_WEIM_D_12 1186 +MX6Q_PAD_CSI0_DAT16__PCIE_CTRL_MUX_20 1187 +MX6Q_PAD_CSI0_DAT16__UART4_RTS 1188 +MX6Q_PAD_CSI0_DAT16__SDMA_DEBUG_PC_10 1189 +MX6Q_PAD_CSI0_DAT16__GPIO_6_2 1190 +MX6Q_PAD_CSI0_DAT16__MMDC_MMDC_DEBUG_39 1191 +MX6Q_PAD_CSI0_DAT16__CHEETAH_TRACE_13 1192 +MX6Q_PAD_CSI0_DAT17__IPU1_CSI0_D_17 1193 +MX6Q_PAD_CSI0_DAT17__WEIM_WEIM_D_13 1194 +MX6Q_PAD_CSI0_DAT17__PCIE_CTRL_MUX_21 1195 +MX6Q_PAD_CSI0_DAT17__UART4_CTS 1196 +MX6Q_PAD_CSI0_DAT17__SDMA_DEBUG_PC_11 1197 +MX6Q_PAD_CSI0_DAT17__GPIO_6_3 1198 +MX6Q_PAD_CSI0_DAT17__MMDC_MMDC_DEBUG_40 1199 +MX6Q_PAD_CSI0_DAT17__CHEETAH_TRACE_14 1200 +MX6Q_PAD_CSI0_DAT18__IPU1_CSI0_D_18 1201 +MX6Q_PAD_CSI0_DAT18__WEIM_WEIM_D_14 1202 +MX6Q_PAD_CSI0_DAT18__PCIE_CTRL_MUX_22 1203 +MX6Q_PAD_CSI0_DAT18__UART5_RTS 1204 +MX6Q_PAD_CSI0_DAT18__SDMA_DEBUG_PC_12 1205 +MX6Q_PAD_CSI0_DAT18__GPIO_6_4 1206 +MX6Q_PAD_CSI0_DAT18__MMDC_MMDC_DEBUG_41 1207 +MX6Q_PAD_CSI0_DAT18__CHEETAH_TRACE_15 1208 +MX6Q_PAD_CSI0_DAT19__IPU1_CSI0_D_19 1209 +MX6Q_PAD_CSI0_DAT19__WEIM_WEIM_D_15 1210 +MX6Q_PAD_CSI0_DAT19__PCIE_CTRL_MUX_23 1211 +MX6Q_PAD_CSI0_DAT19__UART5_CTS 1212 +MX6Q_PAD_CSI0_DAT19__SDMA_DEBUG_PC_13 1213 +MX6Q_PAD_CSI0_DAT19__GPIO_6_5 1214 +MX6Q_PAD_CSI0_DAT19__MMDC_MMDC_DEBUG_42 1215 +MX6Q_PAD_CSI0_DAT19__ANATOP_TESTO_9 1216 +MX6Q_PAD_JTAG_TMS__SJC_TMS 1217 +MX6Q_PAD_JTAG_MOD__SJC_MOD 1218 +MX6Q_PAD_JTAG_TRSTB__SJC_TRSTB 1219 +MX6Q_PAD_JTAG_TDI__SJC_TDI 1220 +MX6Q_PAD_JTAG_TCK__SJC_TCK 1221 +MX6Q_PAD_JTAG_TDO__SJC_TDO 1222 +MX6Q_PAD_LVDS1_TX3_P__LDB_LVDS1_TX3 1223 +MX6Q_PAD_LVDS1_TX2_P__LDB_LVDS1_TX2 1224 +MX6Q_PAD_LVDS1_CLK_P__LDB_LVDS1_CLK 1225 +MX6Q_PAD_LVDS1_TX1_P__LDB_LVDS1_TX1 1226 +MX6Q_PAD_LVDS1_TX0_P__LDB_LVDS1_TX0 1227 +MX6Q_PAD_LVDS0_TX3_P__LDB_LVDS0_TX3 1228 +MX6Q_PAD_LVDS0_CLK_P__LDB_LVDS0_CLK 1229 +MX6Q_PAD_LVDS0_TX2_P__LDB_LVDS0_TX2 1230 +MX6Q_PAD_LVDS0_TX1_P__LDB_LVDS0_TX1 1231 +MX6Q_PAD_LVDS0_TX0_P__LDB_LVDS0_TX0 1232 +MX6Q_PAD_TAMPER__SNVS_LP_WRAP_SNVS_TD1 1233 +MX6Q_PAD_PMIC_ON_REQ__SNVS_LPWRAP_WKALM 1234 +MX6Q_PAD_PMIC_STBY_REQ__CCM_PMIC_STBYRQ 1235 +MX6Q_PAD_POR_B__SRC_POR_B 1236 +MX6Q_PAD_BOOT_MODE1__SRC_BOOT_MODE_1 1237 +MX6Q_PAD_RESET_IN_B__SRC_RESET_B 1238 +MX6Q_PAD_BOOT_MODE0__SRC_BOOT_MODE_0 1239 +MX6Q_PAD_TEST_MODE__TCU_TEST_MODE 1240 +MX6Q_PAD_SD3_DAT7__USDHC3_DAT7 1241 +MX6Q_PAD_SD3_DAT7__UART1_TXD 1242 +MX6Q_PAD_SD3_DAT7__PCIE_CTRL_MUX_24 1243 +MX6Q_PAD_SD3_DAT7__USBOH3_UH3_DFD_OUT_0 1244 +MX6Q_PAD_SD3_DAT7__USBOH3_UH2_DFD_OUT_0 1245 +MX6Q_PAD_SD3_DAT7__GPIO_6_17 1246 +MX6Q_PAD_SD3_DAT7__MIPI_CORE_DPHY_IN_12 1247 +MX6Q_PAD_SD3_DAT7__USBPHY2_CLK20DIV 1248 +MX6Q_PAD_SD3_DAT6__USDHC3_DAT6 1249 +MX6Q_PAD_SD3_DAT6__UART1_RXD 1250 +MX6Q_PAD_SD3_DAT6__PCIE_CTRL_MUX_25 1251 +MX6Q_PAD_SD3_DAT6__USBOH3_UH3_DFD_OUT_1 1252 +MX6Q_PAD_SD3_DAT6__USBOH3_UH2_DFD_OUT_1 1253 +MX6Q_PAD_SD3_DAT6__GPIO_6_18 1254 +MX6Q_PAD_SD3_DAT6__MIPI_CORE_DPHY_IN_13 1255 +MX6Q_PAD_SD3_DAT6__ANATOP_TESTO_10 1256 +MX6Q_PAD_SD3_DAT5__USDHC3_DAT5 1257 +MX6Q_PAD_SD3_DAT5__UART2_TXD 1258 +MX6Q_PAD_SD3_DAT5__PCIE_CTRL_MUX_26 1259 +MX6Q_PAD_SD3_DAT5__USBOH3_UH3_DFD_OUT_2 1260 +MX6Q_PAD_SD3_DAT5__USBOH3_UH2_DFD_OUT_2 1261 +MX6Q_PAD_SD3_DAT5__GPIO_7_0 1262 +MX6Q_PAD_SD3_DAT5__MIPI_CORE_DPHY_IN_14 1263 +MX6Q_PAD_SD3_DAT5__ANATOP_TESTO_11 1264 +MX6Q_PAD_SD3_DAT4__USDHC3_DAT4 1265 +MX6Q_PAD_SD3_DAT4__UART2_RXD 1266 +MX6Q_PAD_SD3_DAT4__PCIE_CTRL_MUX_27 1267 +MX6Q_PAD_SD3_DAT4__USBOH3_UH3_DFD_OUT_3 1268 +MX6Q_PAD_SD3_DAT4__USBOH3_UH2_DFD_OUT_3 1269 +MX6Q_PAD_SD3_DAT4__GPIO_7_1 1270 +MX6Q_PAD_SD3_DAT4__MIPI_CORE_DPHY_IN_15 1271 +MX6Q_PAD_SD3_DAT4__ANATOP_TESTO_12 1272 +MX6Q_PAD_SD3_CMD__USDHC3_CMD 1273 +MX6Q_PAD_SD3_CMD__UART2_CTS 1274 +MX6Q_PAD_SD3_CMD__CAN1_TXCAN 1275 +MX6Q_PAD_SD3_CMD__USBOH3_UH3_DFD_OUT_4 1276 +MX6Q_PAD_SD3_CMD__USBOH3_UH2_DFD_OUT_4 1277 +MX6Q_PAD_SD3_CMD__GPIO_7_2 1278 +MX6Q_PAD_SD3_CMD__MIPI_CORE_DPHY_IN_16 1279 +MX6Q_PAD_SD3_CMD__ANATOP_TESTO_13 1280 +MX6Q_PAD_SD3_CLK__USDHC3_CLK 1281 +MX6Q_PAD_SD3_CLK__UART2_RTS 1282 +MX6Q_PAD_SD3_CLK__CAN1_RXCAN 1283 +MX6Q_PAD_SD3_CLK__USBOH3_UH3_DFD_OUT_5 1284 +MX6Q_PAD_SD3_CLK__USBOH3_UH2_DFD_OUT_5 1285 +MX6Q_PAD_SD3_CLK__GPIO_7_3 1286 +MX6Q_PAD_SD3_CLK__MIPI_CORE_DPHY_IN_17 1287 +MX6Q_PAD_SD3_CLK__ANATOP_TESTO_14 1288 +MX6Q_PAD_SD3_DAT0__USDHC3_DAT0 1289 +MX6Q_PAD_SD3_DAT0__UART1_CTS 1290 +MX6Q_PAD_SD3_DAT0__CAN2_TXCAN 1291 +MX6Q_PAD_SD3_DAT0__USBOH3_UH3_DFD_OUT_6 1292 +MX6Q_PAD_SD3_DAT0__USBOH3_UH2_DFD_OUT_6 1293 +MX6Q_PAD_SD3_DAT0__GPIO_7_4 1294 +MX6Q_PAD_SD3_DAT0__MIPI_CORE_DPHY_IN_18 1295 +MX6Q_PAD_SD3_DAT0__ANATOP_TESTO_15 1296 +MX6Q_PAD_SD3_DAT1__USDHC3_DAT1 1297 +MX6Q_PAD_SD3_DAT1__UART1_RTS 1298 +MX6Q_PAD_SD3_DAT1__CAN2_RXCAN 1299 +MX6Q_PAD_SD3_DAT1__USBOH3_UH3_DFD_OUT_7 1300 +MX6Q_PAD_SD3_DAT1__USBOH3_UH2_DFD_OUT_7 1301 +MX6Q_PAD_SD3_DAT1__GPIO_7_5 1302 +MX6Q_PAD_SD3_DAT1__MIPI_CORE_DPHY_IN_19 1303 +MX6Q_PAD_SD3_DAT1__ANATOP_TESTI_0 1304 +MX6Q_PAD_SD3_DAT2__USDHC3_DAT2 1305 +MX6Q_PAD_SD3_DAT2__PCIE_CTRL_MUX_28 1306 +MX6Q_PAD_SD3_DAT2__USBOH3_UH3_DFD_OUT_8 1307 +MX6Q_PAD_SD3_DAT2__USBOH3_UH2_DFD_OUT_8 1308 +MX6Q_PAD_SD3_DAT2__GPIO_7_6 1309 +MX6Q_PAD_SD3_DAT2__MIPI_CORE_DPHY_IN_20 1310 +MX6Q_PAD_SD3_DAT2__ANATOP_TESTI_1 1311 +MX6Q_PAD_SD3_DAT3__USDHC3_DAT3 1312 +MX6Q_PAD_SD3_DAT3__UART3_CTS 1313 +MX6Q_PAD_SD3_DAT3__PCIE_CTRL_MUX_29 1314 +MX6Q_PAD_SD3_DAT3__USBOH3_UH3_DFD_OUT_9 1315 +MX6Q_PAD_SD3_DAT3__USBOH3_UH2_DFD_OUT_9 1316 +MX6Q_PAD_SD3_DAT3__GPIO_7_7 1317 +MX6Q_PAD_SD3_DAT3__MIPI_CORE_DPHY_IN_21 1318 +MX6Q_PAD_SD3_DAT3__ANATOP_TESTI_2 1319 +MX6Q_PAD_SD3_RST__USDHC3_RST 1320 +MX6Q_PAD_SD3_RST__UART3_RTS 1321 +MX6Q_PAD_SD3_RST__PCIE_CTRL_MUX_30 1322 +MX6Q_PAD_SD3_RST__USBOH3_UH3_DFD_OUT_10 1323 +MX6Q_PAD_SD3_RST__USBOH3_UH2_DFD_OUT_10 1324 +MX6Q_PAD_SD3_RST__GPIO_7_8 1325 +MX6Q_PAD_SD3_RST__MIPI_CORE_DPHY_IN_22 1326 +MX6Q_PAD_SD3_RST__ANATOP_ANATOP_TESTI_3 1327 +MX6Q_PAD_NANDF_CLE__RAWNAND_CLE 1328 +MX6Q_PAD_NANDF_CLE__IPU2_SISG_4 1329 +MX6Q_PAD_NANDF_CLE__PCIE_CTRL_MUX_31 1330 +MX6Q_PAD_NANDF_CLE__USBOH3_UH3_DFD_OT11 1331 +MX6Q_PAD_NANDF_CLE__USBOH3_UH2_DFD_OT11 1332 +MX6Q_PAD_NANDF_CLE__GPIO_6_7 1333 +MX6Q_PAD_NANDF_CLE__MIPI_CORE_DPHY_IN23 1334 +MX6Q_PAD_NANDF_CLE__TPSMP_HTRANS_0 1335 +MX6Q_PAD_NANDF_ALE__RAWNAND_ALE 1336 +MX6Q_PAD_NANDF_ALE__USDHC4_RST 1337 +MX6Q_PAD_NANDF_ALE__PCIE_CTRL_MUX_0 1338 +MX6Q_PAD_NANDF_ALE__USBOH3_UH3_DFD_OT12 1339 +MX6Q_PAD_NANDF_ALE__USBOH3_UH2_DFD_OT12 1340 +MX6Q_PAD_NANDF_ALE__GPIO_6_8 1341 +MX6Q_PAD_NANDF_ALE__MIPI_CR_DPHY_IN_24 1342 +MX6Q_PAD_NANDF_ALE__TPSMP_HTRANS_1 1343 +MX6Q_PAD_NANDF_WP_B__RAWNAND_RESETN 1344 +MX6Q_PAD_NANDF_WP_B__IPU2_SISG_5 1345 +MX6Q_PAD_NANDF_WP_B__PCIE_CTRL__MUX_1 1346 +MX6Q_PAD_NANDF_WP_B__USBOH3_UH3_DFDOT13 1347 +MX6Q_PAD_NANDF_WP_B__USBOH3_UH2_DFDOT13 1348 +MX6Q_PAD_NANDF_WP_B__GPIO_6_9 1349 +MX6Q_PAD_NANDF_WP_B__MIPI_CR_DPHY_OUT32 1350 +MX6Q_PAD_NANDF_WP_B__PL301_PER1_HSIZE_0 1351 +MX6Q_PAD_NANDF_RB0__RAWNAND_READY0 1352 +MX6Q_PAD_NANDF_RB0__IPU2_DI0_PIN1 1353 +MX6Q_PAD_NANDF_RB0__PCIE_CTRL_MUX_2 1354 +MX6Q_PAD_NANDF_RB0__USBOH3_UH3_DFD_OT14 1355 +MX6Q_PAD_NANDF_RB0__USBOH3_UH2_DFD_OT14 1356 +MX6Q_PAD_NANDF_RB0__GPIO_6_10 1357 +MX6Q_PAD_NANDF_RB0__MIPI_CR_DPHY_OUT_33 1358 +MX6Q_PAD_NANDF_RB0__PL301_PER1_HSIZE_1 1359 +MX6Q_PAD_NANDF_CS0__RAWNAND_CE0N 1360 +MX6Q_PAD_NANDF_CS0__USBOH3_UH3_DFD_OT15 1361 +MX6Q_PAD_NANDF_CS0__USBOH3_UH2_DFD_OT15 1362 +MX6Q_PAD_NANDF_CS0__GPIO_6_11 1363 +MX6Q_PAD_NANDF_CS0__PL301_PER1_HSIZE_2 1364 +MX6Q_PAD_NANDF_CS1__RAWNAND_CE1N 1365 +MX6Q_PAD_NANDF_CS1__USDHC4_VSELECT 1366 +MX6Q_PAD_NANDF_CS1__USDHC3_VSELECT 1367 +MX6Q_PAD_NANDF_CS1__PCIE_CTRL_MUX_3 1368 +MX6Q_PAD_NANDF_CS1__GPIO_6_14 1369 +MX6Q_PAD_NANDF_CS1__PL301_PER1_HRDYOUT 1370 +MX6Q_PAD_NANDF_CS2__RAWNAND_CE2N 1371 +MX6Q_PAD_NANDF_CS2__IPU1_SISG_0 1372 +MX6Q_PAD_NANDF_CS2__ESAI1_TX0 1373 +MX6Q_PAD_NANDF_CS2__WEIM_WEIM_CRE 1374 +MX6Q_PAD_NANDF_CS2__CCM_CLKO2 1375 +MX6Q_PAD_NANDF_CS2__GPIO_6_15 1376 +MX6Q_PAD_NANDF_CS2__IPU2_SISG_0 1377 +MX6Q_PAD_NANDF_CS3__RAWNAND_CE3N 1378 +MX6Q_PAD_NANDF_CS3__IPU1_SISG_1 1379 +MX6Q_PAD_NANDF_CS3__ESAI1_TX1 1380 +MX6Q_PAD_NANDF_CS3__WEIM_WEIM_A_26 1381 +MX6Q_PAD_NANDF_CS3__PCIE_CTRL_MUX_4 1382 +MX6Q_PAD_NANDF_CS3__GPIO_6_16 1383 +MX6Q_PAD_NANDF_CS3__IPU2_SISG_1 1384 +MX6Q_PAD_NANDF_CS3__TPSMP_CLK 1385 +MX6Q_PAD_SD4_CMD__USDHC4_CMD 1386 +MX6Q_PAD_SD4_CMD__RAWNAND_RDN 1387 +MX6Q_PAD_SD4_CMD__UART3_TXD 1388 +MX6Q_PAD_SD4_CMD__PCIE_CTRL_MUX_5 1389 +MX6Q_PAD_SD4_CMD__GPIO_7_9 1390 +MX6Q_PAD_SD4_CMD__TPSMP_HDATA_DIR 1391 +MX6Q_PAD_SD4_CLK__USDHC4_CLK 1392 +MX6Q_PAD_SD4_CLK__RAWNAND_WRN 1393 +MX6Q_PAD_SD4_CLK__UART3_RXD 1394 +MX6Q_PAD_SD4_CLK__PCIE_CTRL_MUX_6 1395 +MX6Q_PAD_SD4_CLK__GPIO_7_10 1396 +MX6Q_PAD_NANDF_D0__RAWNAND_D0 1397 +MX6Q_PAD_NANDF_D0__USDHC1_DAT4 1398 +MX6Q_PAD_NANDF_D0__GPU3D_GPU_DBG_OUT_0 1399 +MX6Q_PAD_NANDF_D0__USBOH3_UH2_DFD_OUT16 1400 +MX6Q_PAD_NANDF_D0__USBOH3_UH3_DFD_OUT16 1401 +MX6Q_PAD_NANDF_D0__GPIO_2_0 1402 +MX6Q_PAD_NANDF_D0__IPU1_IPU_DIAG_BUS_0 1403 +MX6Q_PAD_NANDF_D0__IPU2_IPU_DIAG_BUS_0 1404 +MX6Q_PAD_NANDF_D1__RAWNAND_D1 1405 +MX6Q_PAD_NANDF_D1__USDHC1_DAT5 1406 +MX6Q_PAD_NANDF_D1__GPU3D_GPU_DEBUG_OUT1 1407 +MX6Q_PAD_NANDF_D1__USBOH3_UH2_DFD_OUT17 1408 +MX6Q_PAD_NANDF_D1__USBOH3_UH3_DFD_OUT17 1409 +MX6Q_PAD_NANDF_D1__GPIO_2_1 1410 +MX6Q_PAD_NANDF_D1__IPU1_IPU_DIAG_BUS_1 1411 +MX6Q_PAD_NANDF_D1__IPU2_IPU_DIAG_BUS_1 1412 +MX6Q_PAD_NANDF_D2__RAWNAND_D2 1413 +MX6Q_PAD_NANDF_D2__USDHC1_DAT6 1414 +MX6Q_PAD_NANDF_D2__GPU3D_GPU_DBG_OUT_2 1415 +MX6Q_PAD_NANDF_D2__USBOH3_UH2_DFD_OUT18 1416 +MX6Q_PAD_NANDF_D2__USBOH3_UH3_DFD_OUT18 1417 +MX6Q_PAD_NANDF_D2__GPIO_2_2 1418 +MX6Q_PAD_NANDF_D2__IPU1_IPU_DIAG_BUS_2 1419 +MX6Q_PAD_NANDF_D2__IPU2_IPU_DIAG_BUS_2 1420 +MX6Q_PAD_NANDF_D3__RAWNAND_D3 1421 +MX6Q_PAD_NANDF_D3__USDHC1_DAT7 1422 +MX6Q_PAD_NANDF_D3__GPU3D_GPU_DBG_OUT_3 1423 +MX6Q_PAD_NANDF_D3__USBOH3_UH2_DFD_OUT19 1424 +MX6Q_PAD_NANDF_D3__USBOH3_UH3_DFD_OUT19 1425 +MX6Q_PAD_NANDF_D3__GPIO_2_3 1426 +MX6Q_PAD_NANDF_D3__IPU1_IPU_DIAG_BUS_3 1427 +MX6Q_PAD_NANDF_D3__IPU2_IPU_DIAG_BUS_3 1428 +MX6Q_PAD_NANDF_D4__RAWNAND_D4 1429 +MX6Q_PAD_NANDF_D4__USDHC2_DAT4 1430 +MX6Q_PAD_NANDF_D4__GPU3D_GPU_DBG_OUT_4 1431 +MX6Q_PAD_NANDF_D4__USBOH3_UH2_DFD_OUT20 1432 +MX6Q_PAD_NANDF_D4__USBOH3_UH3_DFD_OUT20 1433 +MX6Q_PAD_NANDF_D4__GPIO_2_4 1434 +MX6Q_PAD_NANDF_D4__IPU1_IPU_DIAG_BUS_4 1435 +MX6Q_PAD_NANDF_D4__IPU2_IPU_DIAG_BUS_4 1436 +MX6Q_PAD_NANDF_D5__RAWNAND_D5 1437 +MX6Q_PAD_NANDF_D5__USDHC2_DAT5 1438 +MX6Q_PAD_NANDF_D5__GPU3D_GPU_DBG_OUT_5 1439 +MX6Q_PAD_NANDF_D5__USBOH3_UH2_DFD_OUT21 1440 +MX6Q_PAD_NANDF_D5__USBOH3_UH3_DFD_OUT21 1441 +MX6Q_PAD_NANDF_D5__GPIO_2_5 1442 +MX6Q_PAD_NANDF_D5__IPU1_IPU_DIAG_BUS_5 1443 +MX6Q_PAD_NANDF_D5__IPU2_IPU_DIAG_BUS_5 1444 +MX6Q_PAD_NANDF_D6__RAWNAND_D6 1445 +MX6Q_PAD_NANDF_D6__USDHC2_DAT6 1446 +MX6Q_PAD_NANDF_D6__GPU3D_GPU_DBG_OUT_6 1447 +MX6Q_PAD_NANDF_D6__USBOH3_UH2_DFD_OUT22 1448 +MX6Q_PAD_NANDF_D6__USBOH3_UH3_DFD_OUT22 1449 +MX6Q_PAD_NANDF_D6__GPIO_2_6 1450 +MX6Q_PAD_NANDF_D6__IPU1_IPU_DIAG_BUS_6 1451 +MX6Q_PAD_NANDF_D6__IPU2_IPU_DIAG_BUS_6 1452 +MX6Q_PAD_NANDF_D7__RAWNAND_D7 1453 +MX6Q_PAD_NANDF_D7__USDHC2_DAT7 1454 +MX6Q_PAD_NANDF_D7__GPU3D_GPU_DBG_OUT_7 1455 +MX6Q_PAD_NANDF_D7__USBOH3_UH2_DFD_OUT23 1456 +MX6Q_PAD_NANDF_D7__USBOH3_UH3_DFD_OUT23 1457 +MX6Q_PAD_NANDF_D7__GPIO_2_7 1458 +MX6Q_PAD_NANDF_D7__IPU1_IPU_DIAG_BUS_7 1459 +MX6Q_PAD_NANDF_D7__IPU2_IPU_DIAG_BUS_7 1460 +MX6Q_PAD_SD4_DAT0__RAWNAND_D8 1461 +MX6Q_PAD_SD4_DAT0__USDHC4_DAT0 1462 +MX6Q_PAD_SD4_DAT0__RAWNAND_DQS 1463 +MX6Q_PAD_SD4_DAT0__USBOH3_UH2_DFD_OUT24 1464 +MX6Q_PAD_SD4_DAT0__USBOH3_UH3_DFD_OUT24 1465 +MX6Q_PAD_SD4_DAT0__GPIO_2_8 1466 +MX6Q_PAD_SD4_DAT0__IPU1_IPU_DIAG_BUS_8 1467 +MX6Q_PAD_SD4_DAT0__IPU2_IPU_DIAG_BUS_8 1468 +MX6Q_PAD_SD4_DAT1__RAWNAND_D9 1469 +MX6Q_PAD_SD4_DAT1__USDHC4_DAT1 1470 +MX6Q_PAD_SD4_DAT1__PWM3_PWMO 1471 +MX6Q_PAD_SD4_DAT1__USBOH3_UH2_DFD_OUT25 1472 +MX6Q_PAD_SD4_DAT1__USBOH3_UH3_DFD_OUT25 1473 +MX6Q_PAD_SD4_DAT1__GPIO_2_9 1474 +MX6Q_PAD_SD4_DAT1__IPU1_IPU_DIAG_BUS_9 1475 +MX6Q_PAD_SD4_DAT1__IPU2_IPU_DIAG_BUS_9 1476 +MX6Q_PAD_SD4_DAT2__RAWNAND_D10 1477 +MX6Q_PAD_SD4_DAT2__USDHC4_DAT2 1478 +MX6Q_PAD_SD4_DAT2__PWM4_PWMO 1479 +MX6Q_PAD_SD4_DAT2__USBOH3_UH2_DFD_OUT26 1480 +MX6Q_PAD_SD4_DAT2__USBOH3_UH3_DFD_OUT26 1481 +MX6Q_PAD_SD4_DAT2__GPIO_2_10 1482 +MX6Q_PAD_SD4_DAT2__IPU1_IPU_DIAG_BUS_10 1483 +MX6Q_PAD_SD4_DAT2__IPU2_IPU_DIAG_BUS_10 1484 +MX6Q_PAD_SD4_DAT3__RAWNAND_D11 1485 +MX6Q_PAD_SD4_DAT3__USDHC4_DAT3 1486 +MX6Q_PAD_SD4_DAT3__USBOH3_UH2_DFD_OUT27 1487 +MX6Q_PAD_SD4_DAT3__USBOH3_UH3_DFD_OUT27 1488 +MX6Q_PAD_SD4_DAT3__GPIO_2_11 1489 +MX6Q_PAD_SD4_DAT3__IPU1_IPU_DIAG_BUS_11 1490 +MX6Q_PAD_SD4_DAT3__IPU2_IPU_DIAG_BUS_11 1491 +MX6Q_PAD_SD4_DAT4__RAWNAND_D12 1492 +MX6Q_PAD_SD4_DAT4__USDHC4_DAT4 1493 +MX6Q_PAD_SD4_DAT4__UART2_RXD 1494 +MX6Q_PAD_SD4_DAT4__USBOH3_UH2_DFD_OUT28 1495 +MX6Q_PAD_SD4_DAT4__USBOH3_UH3_DFD_OUT28 1496 +MX6Q_PAD_SD4_DAT4__GPIO_2_12 1497 +MX6Q_PAD_SD4_DAT4__IPU1_IPU_DIAG_BUS_12 1498 +MX6Q_PAD_SD4_DAT4__IPU2_IPU_DIAG_BUS_12 1499 +MX6Q_PAD_SD4_DAT5__RAWNAND_D13 1500 +MX6Q_PAD_SD4_DAT5__USDHC4_DAT5 1501 +MX6Q_PAD_SD4_DAT5__UART2_RTS 1502 +MX6Q_PAD_SD4_DAT5__USBOH3_UH2_DFD_OUT29 1503 +MX6Q_PAD_SD4_DAT5__USBOH3_UH3_DFD_OUT29 1504 +MX6Q_PAD_SD4_DAT5__GPIO_2_13 1505 +MX6Q_PAD_SD4_DAT5__IPU1_IPU_DIAG_BUS_13 1506 +MX6Q_PAD_SD4_DAT5__IPU2_IPU_DIAG_BUS_13 1507 +MX6Q_PAD_SD4_DAT6__RAWNAND_D14 1508 +MX6Q_PAD_SD4_DAT6__USDHC4_DAT6 1509 +MX6Q_PAD_SD4_DAT6__UART2_CTS 1510 +MX6Q_PAD_SD4_DAT6__USBOH3_UH2_DFD_OUT30 1511 +MX6Q_PAD_SD4_DAT6__USBOH3_UH3_DFD_OUT30 1512 +MX6Q_PAD_SD4_DAT6__GPIO_2_14 1513 +MX6Q_PAD_SD4_DAT6__IPU1_IPU_DIAG_BUS_14 1514 +MX6Q_PAD_SD4_DAT6__IPU2_IPU_DIAG_BUS_14 1515 +MX6Q_PAD_SD4_DAT7__RAWNAND_D15 1516 +MX6Q_PAD_SD4_DAT7__USDHC4_DAT7 1517 +MX6Q_PAD_SD4_DAT7__UART2_TXD 1518 +MX6Q_PAD_SD4_DAT7__USBOH3_UH2_DFD_OUT31 1519 +MX6Q_PAD_SD4_DAT7__USBOH3_UH3_DFD_OUT31 1520 +MX6Q_PAD_SD4_DAT7__GPIO_2_15 1521 +MX6Q_PAD_SD4_DAT7__IPU1_IPU_DIAG_BUS_15 1522 +MX6Q_PAD_SD4_DAT7__IPU2_IPU_DIAG_BUS_15 1523 +MX6Q_PAD_SD1_DAT1__USDHC1_DAT1 1524 +MX6Q_PAD_SD1_DAT1__ECSPI5_SS0 1525 +MX6Q_PAD_SD1_DAT1__PWM3_PWMO 1526 +MX6Q_PAD_SD1_DAT1__GPT_CAPIN2 1527 +MX6Q_PAD_SD1_DAT1__PCIE_CTRL_MUX_7 1528 +MX6Q_PAD_SD1_DAT1__GPIO_1_17 1529 +MX6Q_PAD_SD1_DAT1__HDMI_TX_OPHYDTB_0 1530 +MX6Q_PAD_SD1_DAT1__ANATOP_TESTO_8 1531 +MX6Q_PAD_SD1_DAT0__USDHC1_DAT0 1532 +MX6Q_PAD_SD1_DAT0__ECSPI5_MISO 1533 +MX6Q_PAD_SD1_DAT0__CAAM_WRAP_RNG_OSCOBS 1534 +MX6Q_PAD_SD1_DAT0__GPT_CAPIN1 1535 +MX6Q_PAD_SD1_DAT0__PCIE_CTRL_MUX_8 1536 +MX6Q_PAD_SD1_DAT0__GPIO_1_16 1537 +MX6Q_PAD_SD1_DAT0__HDMI_TX_OPHYDTB_1 1538 +MX6Q_PAD_SD1_DAT0__ANATOP_TESTO_7 1539 +MX6Q_PAD_SD1_DAT3__USDHC1_DAT3 1540 +MX6Q_PAD_SD1_DAT3__ECSPI5_SS2 1541 +MX6Q_PAD_SD1_DAT3__GPT_CMPOUT3 1542 +MX6Q_PAD_SD1_DAT3__PWM1_PWMO 1543 +MX6Q_PAD_SD1_DAT3__WDOG2_WDOG_B 1544 +MX6Q_PAD_SD1_DAT3__GPIO_1_21 1545 +MX6Q_PAD_SD1_DAT3__WDOG2_WDOG_RST_B_DEB 1546 +MX6Q_PAD_SD1_DAT3__ANATOP_TESTO_6 1547 +MX6Q_PAD_SD1_CMD__USDHC1_CMD 1548 +MX6Q_PAD_SD1_CMD__ECSPI5_MOSI 1549 +MX6Q_PAD_SD1_CMD__PWM4_PWMO 1550 +MX6Q_PAD_SD1_CMD__GPT_CMPOUT1 1551 +MX6Q_PAD_SD1_CMD__GPIO_1_18 1552 +MX6Q_PAD_SD1_CMD__ANATOP_TESTO_5 1553 +MX6Q_PAD_SD1_DAT2__USDHC1_DAT2 1554 +MX6Q_PAD_SD1_DAT2__ECSPI5_SS1 1555 +MX6Q_PAD_SD1_DAT2__GPT_CMPOUT2 1556 +MX6Q_PAD_SD1_DAT2__PWM2_PWMO 1557 +MX6Q_PAD_SD1_DAT2__WDOG1_WDOG_B 1558 +MX6Q_PAD_SD1_DAT2__GPIO_1_19 1559 +MX6Q_PAD_SD1_DAT2__WDOG1_WDOG_RST_B_DEB 1560 +MX6Q_PAD_SD1_DAT2__ANATOP_TESTO_4 1561 +MX6Q_PAD_SD1_CLK__USDHC1_CLK 1562 +MX6Q_PAD_SD1_CLK__ECSPI5_SCLK 1563 +MX6Q_PAD_SD1_CLK__OSC32K_32K_OUT 1564 +MX6Q_PAD_SD1_CLK__GPT_CLKIN 1565 +MX6Q_PAD_SD1_CLK__GPIO_1_20 1566 +MX6Q_PAD_SD1_CLK__PHY_DTB_0 1567 +MX6Q_PAD_SD1_CLK__SATA_PHY_DTB_0 1568 +MX6Q_PAD_SD2_CLK__USDHC2_CLK 1569 +MX6Q_PAD_SD2_CLK__ECSPI5_SCLK 1570 +MX6Q_PAD_SD2_CLK__KPP_COL_5 1571 +MX6Q_PAD_SD2_CLK__AUDMUX_AUD4_RXFS 1572 +MX6Q_PAD_SD2_CLK__PCIE_CTRL_MUX_9 1573 +MX6Q_PAD_SD2_CLK__GPIO_1_10 1574 +MX6Q_PAD_SD2_CLK__PHY_DTB_1 1575 +MX6Q_PAD_SD2_CLK__SATA_PHY_DTB_1 1576 +MX6Q_PAD_SD2_CMD__USDHC2_CMD 1577 +MX6Q_PAD_SD2_CMD__ECSPI5_MOSI 1578 +MX6Q_PAD_SD2_CMD__KPP_ROW_5 1579 +MX6Q_PAD_SD2_CMD__AUDMUX_AUD4_RXC 1580 +MX6Q_PAD_SD2_CMD__PCIE_CTRL_MUX_10 1581 +MX6Q_PAD_SD2_CMD__GPIO_1_11 1582 +MX6Q_PAD_SD2_DAT3__USDHC2_DAT3 1583 +MX6Q_PAD_SD2_DAT3__ECSPI5_SS3 1584 +MX6Q_PAD_SD2_DAT3__KPP_COL_6 1585 +MX6Q_PAD_SD2_DAT3__AUDMUX_AUD4_TXC 1586 +MX6Q_PAD_SD2_DAT3__PCIE_CTRL_MUX_11 1587 +MX6Q_PAD_SD2_DAT3__GPIO_1_12 1588 +MX6Q_PAD_SD2_DAT3__SJC_DONE 1589 +MX6Q_PAD_SD2_DAT3__ANATOP_TESTO_3 1590 diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig index aad28826d39b..40d78aa5bca2 100644 --- a/drivers/pinctrl/Kconfig +++ b/drivers/pinctrl/Kconfig @@ -31,6 +31,14 @@ config PINCTRL_IMX select PINMUX select PINCONF +config PINCTRL_IMX6Q + bool "IMX6Q pinctrl driver" + depends on OF + depends on SOC_IMX6Q + select PINCTRL_IMX + help + Say Y here to enable the imx6q pinctrl driver + config PINCTRL_PXA3xx bool select PINMUX diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile index a01a97cfe640..133261d821a3 100644 --- a/drivers/pinctrl/Makefile +++ b/drivers/pinctrl/Makefile @@ -10,6 +10,7 @@ obj-$(CONFIG_PINCTRL) += devicetree.o endif obj-$(CONFIG_GENERIC_PINCONF) += pinconf-generic.o obj-$(CONFIG_PINCTRL_IMX) += pinctrl-imx.o +obj-$(CONFIG_PINCTRL_IMX6Q) += pinctrl-imx6q.o obj-$(CONFIG_PINCTRL_PXA3xx) += pinctrl-pxa3xx.o obj-$(CONFIG_PINCTRL_MMP2) += pinctrl-mmp2.o obj-$(CONFIG_PINCTRL_PXA168) += pinctrl-pxa168.o diff --git a/drivers/pinctrl/pinctrl-imx6q.c b/drivers/pinctrl/pinctrl-imx6q.c new file mode 100644 index 000000000000..7737d4d71a3c --- /dev/null +++ b/drivers/pinctrl/pinctrl-imx6q.c @@ -0,0 +1,2331 @@ +/* + * imx6q pinctrl driver based on imx pinmux core + * + * Copyright (C) 2012 Freescale Semiconductor, Inc. + * Copyright (C) 2012 Linaro, Inc. + * + * Author: Dong Aisheng + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include + +#include "pinctrl-imx.h" + +enum imx6q_pads { + MX6Q_PAD_SD2_DAT1 = 0, + MX6Q_PAD_SD2_DAT2 = 1, + MX6Q_PAD_SD2_DAT0 = 2, + MX6Q_PAD_RGMII_TXC = 3, + MX6Q_PAD_RGMII_TD0 = 4, + MX6Q_PAD_RGMII_TD1 = 5, + MX6Q_PAD_RGMII_TD2 = 6, + MX6Q_PAD_RGMII_TD3 = 7, + MX6Q_PAD_RGMII_RX_CTL = 8, + MX6Q_PAD_RGMII_RD0 = 9, + MX6Q_PAD_RGMII_TX_CTL = 10, + MX6Q_PAD_RGMII_RD1 = 11, + MX6Q_PAD_RGMII_RD2 = 12, + MX6Q_PAD_RGMII_RD3 = 13, + MX6Q_PAD_RGMII_RXC = 14, + MX6Q_PAD_EIM_A25 = 15, + MX6Q_PAD_EIM_EB2 = 16, + MX6Q_PAD_EIM_D16 = 17, + MX6Q_PAD_EIM_D17 = 18, + MX6Q_PAD_EIM_D18 = 19, + MX6Q_PAD_EIM_D19 = 20, + MX6Q_PAD_EIM_D20 = 21, + MX6Q_PAD_EIM_D21 = 22, + MX6Q_PAD_EIM_D22 = 23, + MX6Q_PAD_EIM_D23 = 24, + MX6Q_PAD_EIM_EB3 = 25, + MX6Q_PAD_EIM_D24 = 26, + MX6Q_PAD_EIM_D25 = 27, + MX6Q_PAD_EIM_D26 = 28, + MX6Q_PAD_EIM_D27 = 29, + MX6Q_PAD_EIM_D28 = 30, + MX6Q_PAD_EIM_D29 = 31, + MX6Q_PAD_EIM_D30 = 32, + MX6Q_PAD_EIM_D31 = 33, + MX6Q_PAD_EIM_A24 = 34, + MX6Q_PAD_EIM_A23 = 35, + MX6Q_PAD_EIM_A22 = 36, + MX6Q_PAD_EIM_A21 = 37, + MX6Q_PAD_EIM_A20 = 38, + MX6Q_PAD_EIM_A19 = 39, + MX6Q_PAD_EIM_A18 = 40, + MX6Q_PAD_EIM_A17 = 41, + MX6Q_PAD_EIM_A16 = 42, + MX6Q_PAD_EIM_CS0 = 43, + MX6Q_PAD_EIM_CS1 = 44, + MX6Q_PAD_EIM_OE = 45, + MX6Q_PAD_EIM_RW = 46, + MX6Q_PAD_EIM_LBA = 47, + MX6Q_PAD_EIM_EB0 = 48, + MX6Q_PAD_EIM_EB1 = 49, + MX6Q_PAD_EIM_DA0 = 50, + MX6Q_PAD_EIM_DA1 = 51, + MX6Q_PAD_EIM_DA2 = 52, + MX6Q_PAD_EIM_DA3 = 53, + MX6Q_PAD_EIM_DA4 = 54, + MX6Q_PAD_EIM_DA5 = 55, + MX6Q_PAD_EIM_DA6 = 56, + MX6Q_PAD_EIM_DA7 = 57, + MX6Q_PAD_EIM_DA8 = 58, + MX6Q_PAD_EIM_DA9 = 59, + MX6Q_PAD_EIM_DA10 = 60, + MX6Q_PAD_EIM_DA11 = 61, + MX6Q_PAD_EIM_DA12 = 62, + MX6Q_PAD_EIM_DA13 = 63, + MX6Q_PAD_EIM_DA14 = 64, + MX6Q_PAD_EIM_DA15 = 65, + MX6Q_PAD_EIM_WAIT = 66, + MX6Q_PAD_EIM_BCLK = 67, + MX6Q_PAD_DI0_DISP_CLK = 68, + MX6Q_PAD_DI0_PIN15 = 69, + MX6Q_PAD_DI0_PIN2 = 70, + MX6Q_PAD_DI0_PIN3 = 71, + MX6Q_PAD_DI0_PIN4 = 72, + MX6Q_PAD_DISP0_DAT0 = 73, + MX6Q_PAD_DISP0_DAT1 = 74, + MX6Q_PAD_DISP0_DAT2 = 75, + MX6Q_PAD_DISP0_DAT3 = 76, + MX6Q_PAD_DISP0_DAT4 = 77, + MX6Q_PAD_DISP0_DAT5 = 78, + MX6Q_PAD_DISP0_DAT6 = 79, + MX6Q_PAD_DISP0_DAT7 = 80, + MX6Q_PAD_DISP0_DAT8 = 81, + MX6Q_PAD_DISP0_DAT9 = 82, + MX6Q_PAD_DISP0_DAT10 = 83, + MX6Q_PAD_DISP0_DAT11 = 84, + MX6Q_PAD_DISP0_DAT12 = 85, + MX6Q_PAD_DISP0_DAT13 = 86, + MX6Q_PAD_DISP0_DAT14 = 87, + MX6Q_PAD_DISP0_DAT15 = 88, + MX6Q_PAD_DISP0_DAT16 = 89, + MX6Q_PAD_DISP0_DAT17 = 90, + MX6Q_PAD_DISP0_DAT18 = 91, + MX6Q_PAD_DISP0_DAT19 = 92, + MX6Q_PAD_DISP0_DAT20 = 93, + MX6Q_PAD_DISP0_DAT21 = 94, + MX6Q_PAD_DISP0_DAT22 = 95, + MX6Q_PAD_DISP0_DAT23 = 96, + MX6Q_PAD_ENET_MDIO = 97, + MX6Q_PAD_ENET_REF_CLK = 98, + MX6Q_PAD_ENET_RX_ER = 99, + MX6Q_PAD_ENET_CRS_DV = 100, + MX6Q_PAD_ENET_RXD1 = 101, + MX6Q_PAD_ENET_RXD0 = 102, + MX6Q_PAD_ENET_TX_EN = 103, + MX6Q_PAD_ENET_TXD1 = 104, + MX6Q_PAD_ENET_TXD0 = 105, + MX6Q_PAD_ENET_MDC = 106, + MX6Q_PAD_DRAM_D40 = 107, + MX6Q_PAD_DRAM_D41 = 108, + MX6Q_PAD_DRAM_D42 = 109, + MX6Q_PAD_DRAM_D43 = 110, + MX6Q_PAD_DRAM_D44 = 111, + MX6Q_PAD_DRAM_D45 = 112, + MX6Q_PAD_DRAM_D46 = 113, + MX6Q_PAD_DRAM_D47 = 114, + MX6Q_PAD_DRAM_SDQS5 = 115, + MX6Q_PAD_DRAM_DQM5 = 116, + MX6Q_PAD_DRAM_D32 = 117, + MX6Q_PAD_DRAM_D33 = 118, + MX6Q_PAD_DRAM_D34 = 119, + MX6Q_PAD_DRAM_D35 = 120, + MX6Q_PAD_DRAM_D36 = 121, + MX6Q_PAD_DRAM_D37 = 122, + MX6Q_PAD_DRAM_D38 = 123, + MX6Q_PAD_DRAM_D39 = 124, + MX6Q_PAD_DRAM_DQM4 = 125, + MX6Q_PAD_DRAM_SDQS4 = 126, + MX6Q_PAD_DRAM_D24 = 127, + MX6Q_PAD_DRAM_D25 = 128, + MX6Q_PAD_DRAM_D26 = 129, + MX6Q_PAD_DRAM_D27 = 130, + MX6Q_PAD_DRAM_D28 = 131, + MX6Q_PAD_DRAM_D29 = 132, + MX6Q_PAD_DRAM_SDQS3 = 133, + MX6Q_PAD_DRAM_D30 = 134, + MX6Q_PAD_DRAM_D31 = 135, + MX6Q_PAD_DRAM_DQM3 = 136, + MX6Q_PAD_DRAM_D16 = 137, + MX6Q_PAD_DRAM_D17 = 138, + MX6Q_PAD_DRAM_D18 = 139, + MX6Q_PAD_DRAM_D19 = 140, + MX6Q_PAD_DRAM_D20 = 141, + MX6Q_PAD_DRAM_D21 = 142, + MX6Q_PAD_DRAM_D22 = 143, + MX6Q_PAD_DRAM_SDQS2 = 144, + MX6Q_PAD_DRAM_D23 = 145, + MX6Q_PAD_DRAM_DQM2 = 146, + MX6Q_PAD_DRAM_A0 = 147, + MX6Q_PAD_DRAM_A1 = 148, + MX6Q_PAD_DRAM_A2 = 149, + MX6Q_PAD_DRAM_A3 = 150, + MX6Q_PAD_DRAM_A4 = 151, + MX6Q_PAD_DRAM_A5 = 152, + MX6Q_PAD_DRAM_A6 = 153, + MX6Q_PAD_DRAM_A7 = 154, + MX6Q_PAD_DRAM_A8 = 155, + MX6Q_PAD_DRAM_A9 = 156, + MX6Q_PAD_DRAM_A10 = 157, + MX6Q_PAD_DRAM_A11 = 158, + MX6Q_PAD_DRAM_A12 = 159, + MX6Q_PAD_DRAM_A13 = 160, + MX6Q_PAD_DRAM_A14 = 161, + MX6Q_PAD_DRAM_A15 = 162, + MX6Q_PAD_DRAM_CAS = 163, + MX6Q_PAD_DRAM_CS0 = 164, + MX6Q_PAD_DRAM_CS1 = 165, + MX6Q_PAD_DRAM_RAS = 166, + MX6Q_PAD_DRAM_RESET = 167, + MX6Q_PAD_DRAM_SDBA0 = 168, + MX6Q_PAD_DRAM_SDBA1 = 169, + MX6Q_PAD_DRAM_SDCLK_0 = 170, + MX6Q_PAD_DRAM_SDBA2 = 171, + MX6Q_PAD_DRAM_SDCKE0 = 172, + MX6Q_PAD_DRAM_SDCLK_1 = 173, + MX6Q_PAD_DRAM_SDCKE1 = 174, + MX6Q_PAD_DRAM_SDODT0 = 175, + MX6Q_PAD_DRAM_SDODT1 = 176, + MX6Q_PAD_DRAM_SDWE = 177, + MX6Q_PAD_DRAM_D0 = 178, + MX6Q_PAD_DRAM_D1 = 179, + MX6Q_PAD_DRAM_D2 = 180, + MX6Q_PAD_DRAM_D3 = 181, + MX6Q_PAD_DRAM_D4 = 182, + MX6Q_PAD_DRAM_D5 = 183, + MX6Q_PAD_DRAM_SDQS0 = 184, + MX6Q_PAD_DRAM_D6 = 185, + MX6Q_PAD_DRAM_D7 = 186, + MX6Q_PAD_DRAM_DQM0 = 187, + MX6Q_PAD_DRAM_D8 = 188, + MX6Q_PAD_DRAM_D9 = 189, + MX6Q_PAD_DRAM_D10 = 190, + MX6Q_PAD_DRAM_D11 = 191, + MX6Q_PAD_DRAM_D12 = 192, + MX6Q_PAD_DRAM_D13 = 193, + MX6Q_PAD_DRAM_D14 = 194, + MX6Q_PAD_DRAM_SDQS1 = 195, + MX6Q_PAD_DRAM_D15 = 196, + MX6Q_PAD_DRAM_DQM1 = 197, + MX6Q_PAD_DRAM_D48 = 198, + MX6Q_PAD_DRAM_D49 = 199, + MX6Q_PAD_DRAM_D50 = 200, + MX6Q_PAD_DRAM_D51 = 201, + MX6Q_PAD_DRAM_D52 = 202, + MX6Q_PAD_DRAM_D53 = 203, + MX6Q_PAD_DRAM_D54 = 204, + MX6Q_PAD_DRAM_D55 = 205, + MX6Q_PAD_DRAM_SDQS6 = 206, + MX6Q_PAD_DRAM_DQM6 = 207, + MX6Q_PAD_DRAM_D56 = 208, + MX6Q_PAD_DRAM_SDQS7 = 209, + MX6Q_PAD_DRAM_D57 = 210, + MX6Q_PAD_DRAM_D58 = 211, + MX6Q_PAD_DRAM_D59 = 212, + MX6Q_PAD_DRAM_D60 = 213, + MX6Q_PAD_DRAM_DQM7 = 214, + MX6Q_PAD_DRAM_D61 = 215, + MX6Q_PAD_DRAM_D62 = 216, + MX6Q_PAD_DRAM_D63 = 217, + MX6Q_PAD_KEY_COL0 = 218, + MX6Q_PAD_KEY_ROW0 = 219, + MX6Q_PAD_KEY_COL1 = 220, + MX6Q_PAD_KEY_ROW1 = 221, + MX6Q_PAD_KEY_COL2 = 222, + MX6Q_PAD_KEY_ROW2 = 223, + MX6Q_PAD_KEY_COL3 = 224, + MX6Q_PAD_KEY_ROW3 = 225, + MX6Q_PAD_KEY_COL4 = 226, + MX6Q_PAD_KEY_ROW4 = 227, + MX6Q_PAD_GPIO_0 = 228, + MX6Q_PAD_GPIO_1 = 229, + MX6Q_PAD_GPIO_9 = 230, + MX6Q_PAD_GPIO_3 = 231, + MX6Q_PAD_GPIO_6 = 232, + MX6Q_PAD_GPIO_2 = 233, + MX6Q_PAD_GPIO_4 = 234, + MX6Q_PAD_GPIO_5 = 235, + MX6Q_PAD_GPIO_7 = 236, + MX6Q_PAD_GPIO_8 = 237, + MX6Q_PAD_GPIO_16 = 238, + MX6Q_PAD_GPIO_17 = 239, + MX6Q_PAD_GPIO_18 = 240, + MX6Q_PAD_GPIO_19 = 241, + MX6Q_PAD_CSI0_PIXCLK = 242, + MX6Q_PAD_CSI0_MCLK = 243, + MX6Q_PAD_CSI0_DATA_EN = 244, + MX6Q_PAD_CSI0_VSYNC = 245, + MX6Q_PAD_CSI0_DAT4 = 246, + MX6Q_PAD_CSI0_DAT5 = 247, + MX6Q_PAD_CSI0_DAT6 = 248, + MX6Q_PAD_CSI0_DAT7 = 249, + MX6Q_PAD_CSI0_DAT8 = 250, + MX6Q_PAD_CSI0_DAT9 = 251, + MX6Q_PAD_CSI0_DAT10 = 252, + MX6Q_PAD_CSI0_DAT11 = 253, + MX6Q_PAD_CSI0_DAT12 = 254, + MX6Q_PAD_CSI0_DAT13 = 255, + MX6Q_PAD_CSI0_DAT14 = 256, + MX6Q_PAD_CSI0_DAT15 = 257, + MX6Q_PAD_CSI0_DAT16 = 258, + MX6Q_PAD_CSI0_DAT17 = 259, + MX6Q_PAD_CSI0_DAT18 = 260, + MX6Q_PAD_CSI0_DAT19 = 261, + MX6Q_PAD_JTAG_TMS = 262, + MX6Q_PAD_JTAG_MOD = 263, + MX6Q_PAD_JTAG_TRSTB = 264, + MX6Q_PAD_JTAG_TDI = 265, + MX6Q_PAD_JTAG_TCK = 266, + MX6Q_PAD_JTAG_TDO = 267, + MX6Q_PAD_LVDS1_TX3_P = 268, + MX6Q_PAD_LVDS1_TX2_P = 269, + MX6Q_PAD_LVDS1_CLK_P = 270, + MX6Q_PAD_LVDS1_TX1_P = 271, + MX6Q_PAD_LVDS1_TX0_P = 272, + MX6Q_PAD_LVDS0_TX3_P = 273, + MX6Q_PAD_LVDS0_CLK_P = 274, + MX6Q_PAD_LVDS0_TX2_P = 275, + MX6Q_PAD_LVDS0_TX1_P = 276, + MX6Q_PAD_LVDS0_TX0_P = 277, + MX6Q_PAD_TAMPER = 278, + MX6Q_PAD_PMIC_ON_REQ = 279, + MX6Q_PAD_PMIC_STBY_REQ = 280, + MX6Q_PAD_POR_B = 281, + MX6Q_PAD_BOOT_MODE1 = 282, + MX6Q_PAD_RESET_IN_B = 283, + MX6Q_PAD_BOOT_MODE0 = 284, + MX6Q_PAD_TEST_MODE = 285, + MX6Q_PAD_SD3_DAT7 = 286, + MX6Q_PAD_SD3_DAT6 = 287, + MX6Q_PAD_SD3_DAT5 = 288, + MX6Q_PAD_SD3_DAT4 = 289, + MX6Q_PAD_SD3_CMD = 290, + MX6Q_PAD_SD3_CLK = 291, + MX6Q_PAD_SD3_DAT0 = 292, + MX6Q_PAD_SD3_DAT1 = 293, + MX6Q_PAD_SD3_DAT2 = 294, + MX6Q_PAD_SD3_DAT3 = 295, + MX6Q_PAD_SD3_RST = 296, + MX6Q_PAD_NANDF_CLE = 297, + MX6Q_PAD_NANDF_ALE = 298, + MX6Q_PAD_NANDF_WP_B = 299, + MX6Q_PAD_NANDF_RB0 = 300, + MX6Q_PAD_NANDF_CS0 = 301, + MX6Q_PAD_NANDF_CS1 = 302, + MX6Q_PAD_NANDF_CS2 = 303, + MX6Q_PAD_NANDF_CS3 = 304, + MX6Q_PAD_SD4_CMD = 305, + MX6Q_PAD_SD4_CLK = 306, + MX6Q_PAD_NANDF_D0 = 307, + MX6Q_PAD_NANDF_D1 = 308, + MX6Q_PAD_NANDF_D2 = 309, + MX6Q_PAD_NANDF_D3 = 310, + MX6Q_PAD_NANDF_D4 = 311, + MX6Q_PAD_NANDF_D5 = 312, + MX6Q_PAD_NANDF_D6 = 313, + MX6Q_PAD_NANDF_D7 = 314, + MX6Q_PAD_SD4_DAT0 = 315, + MX6Q_PAD_SD4_DAT1 = 316, + MX6Q_PAD_SD4_DAT2 = 317, + MX6Q_PAD_SD4_DAT3 = 318, + MX6Q_PAD_SD4_DAT4 = 319, + MX6Q_PAD_SD4_DAT5 = 320, + MX6Q_PAD_SD4_DAT6 = 321, + MX6Q_PAD_SD4_DAT7 = 322, + MX6Q_PAD_SD1_DAT1 = 323, + MX6Q_PAD_SD1_DAT0 = 324, + MX6Q_PAD_SD1_DAT3 = 325, + MX6Q_PAD_SD1_CMD = 326, + MX6Q_PAD_SD1_DAT2 = 327, + MX6Q_PAD_SD1_CLK = 328, + MX6Q_PAD_SD2_CLK = 329, + MX6Q_PAD_SD2_CMD = 330, + MX6Q_PAD_SD2_DAT3 = 331, +}; + +/* imx6q register maps */ +static struct imx_pin_reg imx6q_pin_regs[] = { + IMX_PIN_REG(MX6Q_PAD_SD2_DAT1, 0x0360, 0x004C, 0, 0x0000, 0), /* MX6Q_PAD_SD2_DAT1__USDHC2_DAT1 */ + IMX_PIN_REG(MX6Q_PAD_SD2_DAT1, 0x0360, 0x004C, 1, 0x0834, 0), /* MX6Q_PAD_SD2_DAT1__ECSPI5_SS0 */ + IMX_PIN_REG(MX6Q_PAD_SD2_DAT1, 0x0360, 0x004C, 2, 0x0000, 0), /* MX6Q_PAD_SD2_DAT1__WEIM_WEIM_CS_2 */ + IMX_PIN_REG(MX6Q_PAD_SD2_DAT1, 0x0360, 0x004C, 3, 0x07C8, 0), /* MX6Q_PAD_SD2_DAT1__AUDMUX_AUD4_TXFS */ + IMX_PIN_REG(MX6Q_PAD_SD2_DAT1, 0x0360, 0x004C, 4, 0x08F0, 0), /* MX6Q_PAD_SD2_DAT1__KPP_COL_7 */ + IMX_PIN_REG(MX6Q_PAD_SD2_DAT1, 0x0360, 0x004C, 5, 0x0000, 0), /* MX6Q_PAD_SD2_DAT1__GPIO_1_14 */ + IMX_PIN_REG(MX6Q_PAD_SD2_DAT1, 0x0360, 0x004C, 6, 0x0000, 0), /* MX6Q_PAD_SD2_DAT1__CCM_WAIT */ + IMX_PIN_REG(MX6Q_PAD_SD2_DAT1, 0x0360, 0x004C, 7, 0x0000, 0), /* MX6Q_PAD_SD2_DAT1__ANATOP_TESTO_0 */ + IMX_PIN_REG(MX6Q_PAD_SD2_DAT2, 0x0364, 0x0050, 0, 0x0000, 0), /* MX6Q_PAD_SD2_DAT2__USDHC2_DAT2 */ + IMX_PIN_REG(MX6Q_PAD_SD2_DAT2, 0x0364, 0x0050, 1, 0x0838, 0), /* MX6Q_PAD_SD2_DAT2__ECSPI5_SS1 */ + IMX_PIN_REG(MX6Q_PAD_SD2_DAT2, 0x0364, 0x0050, 2, 0x0000, 0), /* MX6Q_PAD_SD2_DAT2__WEIM_WEIM_CS_3 */ + IMX_PIN_REG(MX6Q_PAD_SD2_DAT2, 0x0364, 0x0050, 3, 0x07B8, 0), /* MX6Q_PAD_SD2_DAT2__AUDMUX_AUD4_TXD */ + IMX_PIN_REG(MX6Q_PAD_SD2_DAT2, 0x0364, 0x0050, 4, 0x08F8, 0), /* MX6Q_PAD_SD2_DAT2__KPP_ROW_6 */ + IMX_PIN_REG(MX6Q_PAD_SD2_DAT2, 0x0364, 0x0050, 5, 0x0000, 0), /* MX6Q_PAD_SD2_DAT2__GPIO_1_13 */ + IMX_PIN_REG(MX6Q_PAD_SD2_DAT2, 0x0364, 0x0050, 6, 0x0000, 0), /* MX6Q_PAD_SD2_DAT2__CCM_STOP */ + IMX_PIN_REG(MX6Q_PAD_SD2_DAT2, 0x0364, 0x0050, 7, 0x0000, 0), /* MX6Q_PAD_SD2_DAT2__ANATOP_TESTO_1 */ + IMX_PIN_REG(MX6Q_PAD_SD2_DAT0, 0x0368, 0x0054, 0, 0x0000, 0), /* MX6Q_PAD_SD2_DAT0__USDHC2_DAT0 */ + IMX_PIN_REG(MX6Q_PAD_SD2_DAT0, 0x0368, 0x0054, 1, 0x082C, 0), /* MX6Q_PAD_SD2_DAT0__ECSPI5_MISO */ + IMX_PIN_REG(MX6Q_PAD_SD2_DAT0, 0x0368, 0x0054, 3, 0x07B4, 0), /* MX6Q_PAD_SD2_DAT0__AUDMUX_AUD4_RXD */ + IMX_PIN_REG(MX6Q_PAD_SD2_DAT0, 0x0368, 0x0054, 4, 0x08FC, 0), /* MX6Q_PAD_SD2_DAT0__KPP_ROW_7 */ + IMX_PIN_REG(MX6Q_PAD_SD2_DAT0, 0x0368, 0x0054, 5, 0x0000, 0), /* MX6Q_PAD_SD2_DAT0__GPIO_1_15 */ + IMX_PIN_REG(MX6Q_PAD_SD2_DAT0, 0x0368, 0x0054, 6, 0x0000, 0), /* MX6Q_PAD_SD2_DAT0__DCIC2_DCIC_OUT */ + IMX_PIN_REG(MX6Q_PAD_SD2_DAT0, 0x0368, 0x0054, 7, 0x0000, 0), /* MX6Q_PAD_SD2_DAT0__TESTO_2 */ + IMX_PIN_REG(MX6Q_PAD_RGMII_TXC, 0x036C, 0x0058, 0, 0x0000, 0), /* MX6Q_PAD_RGMII_TXC__USBOH3_H2_DATA */ + IMX_PIN_REG(MX6Q_PAD_RGMII_TXC, 0x036C, 0x0058, 1, 0x0000, 0), /* MX6Q_PAD_RGMII_TXC__ENET_RGMII_TXC */ + IMX_PIN_REG(MX6Q_PAD_RGMII_TXC, 0x036C, 0x0058, 2, 0x0918, 0), /* MX6Q_PAD_RGMII_TXC__SPDIF_SPDIF_EXTCLK */ + IMX_PIN_REG(MX6Q_PAD_RGMII_TXC, 0x036C, 0x0058, 5, 0x0000, 0), /* MX6Q_PAD_RGMII_TXC__GPIO_6_19 */ + IMX_PIN_REG(MX6Q_PAD_RGMII_TXC, 0x036C, 0x0058, 6, 0x0000, 0), /* MX6Q_PAD_RGMII_TXC__MIPI_CORE_DPHY_IN_0 */ + IMX_PIN_REG(MX6Q_PAD_RGMII_TXC, 0x036C, 0x0058, 7, 0x0000, 0), /* MX6Q_PAD_RGMII_TXC__ANATOP_24M_OUT */ + IMX_PIN_REG(MX6Q_PAD_RGMII_TD0, 0x0370, 0x005C, 0, 0x0000, 0), /* MX6Q_PAD_RGMII_TD0__MIPI_HSI_CRL_TX_RDY */ + IMX_PIN_REG(MX6Q_PAD_RGMII_TD0, 0x0370, 0x005C, 1, 0x0000, 0), /* MX6Q_PAD_RGMII_TD0__ENET_RGMII_TD0 */ + IMX_PIN_REG(MX6Q_PAD_RGMII_TD0, 0x0370, 0x005C, 5, 0x0000, 0), /* MX6Q_PAD_RGMII_TD0__GPIO_6_20 */ + IMX_PIN_REG(MX6Q_PAD_RGMII_TD0, 0x0370, 0x005C, 6, 0x0000, 0), /* MX6Q_PAD_RGMII_TD0__MIPI_CORE_DPHY_IN_1 */ + IMX_PIN_REG(MX6Q_PAD_RGMII_TD1, 0x0374, 0x0060, 0, 0x0000, 0), /* MX6Q_PAD_RGMII_TD1__MIPI_HSI_CRL_RX_FLG */ + IMX_PIN_REG(MX6Q_PAD_RGMII_TD1, 0x0374, 0x0060, 1, 0x0000, 0), /* MX6Q_PAD_RGMII_TD1__ENET_RGMII_TD1 */ + IMX_PIN_REG(MX6Q_PAD_RGMII_TD1, 0x0374, 0x0060, 5, 0x0000, 0), /* MX6Q_PAD_RGMII_TD1__GPIO_6_21 */ + IMX_PIN_REG(MX6Q_PAD_RGMII_TD1, 0x0374, 0x0060, 6, 0x0000, 0), /* MX6Q_PAD_RGMII_TD1__MIPI_CORE_DPHY_IN_2 */ + IMX_PIN_REG(MX6Q_PAD_RGMII_TD1, 0x0374, 0x0060, 7, 0x0000, 0), /* MX6Q_PAD_RGMII_TD1__CCM_PLL3_BYP */ + IMX_PIN_REG(MX6Q_PAD_RGMII_TD2, 0x0378, 0x0064, 0, 0x0000, 0), /* MX6Q_PAD_RGMII_TD2__MIPI_HSI_CRL_RX_DTA */ + IMX_PIN_REG(MX6Q_PAD_RGMII_TD2, 0x0378, 0x0064, 1, 0x0000, 0), /* MX6Q_PAD_RGMII_TD2__ENET_RGMII_TD2 */ + IMX_PIN_REG(MX6Q_PAD_RGMII_TD2, 0x0378, 0x0064, 5, 0x0000, 0), /* MX6Q_PAD_RGMII_TD2__GPIO_6_22 */ + IMX_PIN_REG(MX6Q_PAD_RGMII_TD2, 0x0378, 0x0064, 6, 0x0000, 0), /* MX6Q_PAD_RGMII_TD2__MIPI_CORE_DPHY_IN_3 */ + IMX_PIN_REG(MX6Q_PAD_RGMII_TD2, 0x0378, 0x0064, 7, 0x0000, 0), /* MX6Q_PAD_RGMII_TD2__CCM_PLL2_BYP */ + IMX_PIN_REG(MX6Q_PAD_RGMII_TD3, 0x037C, 0x0068, 0, 0x0000, 0), /* MX6Q_PAD_RGMII_TD3__MIPI_HSI_CRL_RX_WAK */ + IMX_PIN_REG(MX6Q_PAD_RGMII_TD3, 0x037C, 0x0068, 1, 0x0000, 0), /* MX6Q_PAD_RGMII_TD3__ENET_RGMII_TD3 */ + IMX_PIN_REG(MX6Q_PAD_RGMII_TD3, 0x037C, 0x0068, 5, 0x0000, 0), /* MX6Q_PAD_RGMII_TD3__GPIO_6_23 */ + IMX_PIN_REG(MX6Q_PAD_RGMII_TD3, 0x037C, 0x0068, 6, 0x0000, 0), /* MX6Q_PAD_RGMII_TD3__MIPI_CORE_DPHY_IN_4 */ + IMX_PIN_REG(MX6Q_PAD_RGMII_RX_CTL, 0x0380, 0x006C, 0, 0x0000, 0), /* MX6Q_PAD_RGMII_RX_CTL__USBOH3_H3_DATA */ + IMX_PIN_REG(MX6Q_PAD_RGMII_RX_CTL, 0x0380, 0x006C, 1, 0x0858, 0), /* MX6Q_PAD_RGMII_RX_CTL__RGMII_RX_CTL */ + IMX_PIN_REG(MX6Q_PAD_RGMII_RX_CTL, 0x0380, 0x006C, 5, 0x0000, 0), /* MX6Q_PAD_RGMII_RX_CTL__GPIO_6_24 */ + IMX_PIN_REG(MX6Q_PAD_RGMII_RX_CTL, 0x0380, 0x006C, 6, 0x0000, 0), /* MX6Q_PAD_RGMII_RX_CTL__MIPI_DPHY_IN_5 */ + IMX_PIN_REG(MX6Q_PAD_RGMII_RD0, 0x0384, 0x0070, 0, 0x0000, 0), /* MX6Q_PAD_RGMII_RD0__MIPI_HSI_CRL_RX_RDY */ + IMX_PIN_REG(MX6Q_PAD_RGMII_RD0, 0x0384, 0x0070, 1, 0x0848, 0), /* MX6Q_PAD_RGMII_RD0__ENET_RGMII_RD0 */ + IMX_PIN_REG(MX6Q_PAD_RGMII_RD0, 0x0384, 0x0070, 5, 0x0000, 0), /* MX6Q_PAD_RGMII_RD0__GPIO_6_25 */ + IMX_PIN_REG(MX6Q_PAD_RGMII_RD0, 0x0384, 0x0070, 6, 0x0000, 0), /* MX6Q_PAD_RGMII_RD0__MIPI_CORE_DPHY_IN_6 */ + IMX_PIN_REG(MX6Q_PAD_RGMII_TX_CTL, 0x0388, 0x0074, 0, 0x0000, 0), /* MX6Q_PAD_RGMII_TX_CTL__USBOH3_H2_STROBE */ + IMX_PIN_REG(MX6Q_PAD_RGMII_TX_CTL, 0x0388, 0x0074, 1, 0x0000, 0), /* MX6Q_PAD_RGMII_TX_CTL__RGMII_TX_CTL */ + IMX_PIN_REG(MX6Q_PAD_RGMII_TX_CTL, 0x0388, 0x0074, 5, 0x0000, 0), /* MX6Q_PAD_RGMII_TX_CTL__GPIO_6_26 */ + IMX_PIN_REG(MX6Q_PAD_RGMII_TX_CTL, 0x0388, 0x0074, 6, 0x0000, 0), /* MX6Q_PAD_RGMII_TX_CTL__CORE_DPHY_IN_7 */ + IMX_PIN_REG(MX6Q_PAD_RGMII_TX_CTL, 0x0388, 0x0074, 7, 0x083C, 0), /* MX6Q_PAD_RGMII_TX_CTL__ANATOP_REF_OUT */ + IMX_PIN_REG(MX6Q_PAD_RGMII_RD1, 0x038C, 0x0078, 0, 0x0000, 0), /* MX6Q_PAD_RGMII_RD1__MIPI_HSI_CTRL_TX_FL */ + IMX_PIN_REG(MX6Q_PAD_RGMII_RD1, 0x038C, 0x0078, 1, 0x084C, 0), /* MX6Q_PAD_RGMII_RD1__ENET_RGMII_RD1 */ + IMX_PIN_REG(MX6Q_PAD_RGMII_RD1, 0x038C, 0x0078, 5, 0x0000, 0), /* MX6Q_PAD_RGMII_RD1__GPIO_6_27 */ + IMX_PIN_REG(MX6Q_PAD_RGMII_RD1, 0x038C, 0x0078, 6, 0x0000, 0), /* MX6Q_PAD_RGMII_RD1__CORE_DPHY_TEST_IN_8 */ + IMX_PIN_REG(MX6Q_PAD_RGMII_RD1, 0x038C, 0x0078, 7, 0x0000, 0), /* MX6Q_PAD_RGMII_RD1__SJC_FAIL */ + IMX_PIN_REG(MX6Q_PAD_RGMII_RD2, 0x0390, 0x007C, 0, 0x0000, 0), /* MX6Q_PAD_RGMII_RD2__MIPI_HSI_CRL_TX_DTA */ + IMX_PIN_REG(MX6Q_PAD_RGMII_RD2, 0x0390, 0x007C, 1, 0x0850, 0), /* MX6Q_PAD_RGMII_RD2__ENET_RGMII_RD2 */ + IMX_PIN_REG(MX6Q_PAD_RGMII_RD2, 0x0390, 0x007C, 5, 0x0000, 0), /* MX6Q_PAD_RGMII_RD2__GPIO_6_28 */ + IMX_PIN_REG(MX6Q_PAD_RGMII_RD2, 0x0390, 0x007C, 6, 0x0000, 0), /* MX6Q_PAD_RGMII_RD2__MIPI_CORE_DPHY_IN_9 */ + IMX_PIN_REG(MX6Q_PAD_RGMII_RD3, 0x0394, 0x0080, 0, 0x0000, 0), /* MX6Q_PAD_RGMII_RD3__MIPI_HSI_CRL_TX_WAK */ + IMX_PIN_REG(MX6Q_PAD_RGMII_RD3, 0x0394, 0x0080, 1, 0x0854, 0), /* MX6Q_PAD_RGMII_RD3__ENET_RGMII_RD3 */ + IMX_PIN_REG(MX6Q_PAD_RGMII_RD3, 0x0394, 0x0080, 5, 0x0000, 0), /* MX6Q_PAD_RGMII_RD3__GPIO_6_29 */ + IMX_PIN_REG(MX6Q_PAD_RGMII_RD3, 0x0394, 0x0080, 6, 0x0000, 0), /* MX6Q_PAD_RGMII_RD3__MIPI_CORE_DPHY_IN10 */ + IMX_PIN_REG(MX6Q_PAD_RGMII_RXC, 0x0398, 0x0084, 0, 0x0000, 0), /* MX6Q_PAD_RGMII_RXC__USBOH3_H3_STROBE */ + IMX_PIN_REG(MX6Q_PAD_RGMII_RXC, 0x0398, 0x0084, 1, 0x0844, 0), /* MX6Q_PAD_RGMII_RXC__ENET_RGMII_RXC */ + IMX_PIN_REG(MX6Q_PAD_RGMII_RXC, 0x0398, 0x0084, 5, 0x0000, 0), /* MX6Q_PAD_RGMII_RXC__GPIO_6_30 */ + IMX_PIN_REG(MX6Q_PAD_RGMII_RXC, 0x0398, 0x0084, 6, 0x0000, 0), /* MX6Q_PAD_RGMII_RXC__MIPI_CORE_DPHY_IN11 */ + IMX_PIN_REG(MX6Q_PAD_EIM_A25, 0x039C, 0x0088, 0, 0x0000, 0), /* MX6Q_PAD_EIM_A25__WEIM_WEIM_A_25 */ + IMX_PIN_REG(MX6Q_PAD_EIM_A25, 0x039C, 0x0088, 1, 0x0000, 0), /* MX6Q_PAD_EIM_A25__ECSPI4_SS1 */ + IMX_PIN_REG(MX6Q_PAD_EIM_A25, 0x039C, 0x0088, 2, 0x0000, 0), /* MX6Q_PAD_EIM_A25__ECSPI2_RDY */ + IMX_PIN_REG(MX6Q_PAD_EIM_A25, 0x039C, 0x0088, 3, 0x0000, 0), /* MX6Q_PAD_EIM_A25__IPU1_DI1_PIN12 */ + IMX_PIN_REG(MX6Q_PAD_EIM_A25, 0x039C, 0x0088, 4, 0x0000, 0), /* MX6Q_PAD_EIM_A25__IPU1_DI0_D1_CS */ + IMX_PIN_REG(MX6Q_PAD_EIM_A25, 0x039C, 0x0088, 5, 0x0000, 0), /* MX6Q_PAD_EIM_A25__GPIO_5_2 */ + IMX_PIN_REG(MX6Q_PAD_EIM_A25, 0x039C, 0x0088, 6, 0x088C, 0), /* MX6Q_PAD_EIM_A25__HDMI_TX_CEC_LINE */ + IMX_PIN_REG(MX6Q_PAD_EIM_A25, 0x039C, 0x0088, 7, 0x0000, 0), /* MX6Q_PAD_EIM_A25__PL301_PER1_HBURST_0 */ + IMX_PIN_REG(MX6Q_PAD_EIM_EB2, 0x03A0, 0x008C, 0, 0x0000, 0), /* MX6Q_PAD_EIM_EB2__WEIM_WEIM_EB_2 */ + IMX_PIN_REG(MX6Q_PAD_EIM_EB2, 0x03A0, 0x008C, 1, 0x0800, 0), /* MX6Q_PAD_EIM_EB2__ECSPI1_SS0 */ + IMX_PIN_REG(MX6Q_PAD_EIM_EB2, 0x03A0, 0x008C, 2, 0x07EC, 0), /* MX6Q_PAD_EIM_EB2__CCM_DI1_EXT_CLK */ + IMX_PIN_REG(MX6Q_PAD_EIM_EB2, 0x03A0, 0x008C, 3, 0x08D4, 0), /* MX6Q_PAD_EIM_EB2__IPU2_CSI1_D_19 */ + IMX_PIN_REG(MX6Q_PAD_EIM_EB2, 0x03A0, 0x008C, 4, 0x0890, 0), /* MX6Q_PAD_EIM_EB2__HDMI_TX_DDC_SCL */ + IMX_PIN_REG(MX6Q_PAD_EIM_EB2, 0x03A0, 0x008C, 5, 0x0000, 0), /* MX6Q_PAD_EIM_EB2__GPIO_2_30 */ + IMX_PIN_REG(MX6Q_PAD_EIM_EB2, 0x03A0, 0x008C, 6, 0x08A0, 0), /* MX6Q_PAD_EIM_EB2__I2C2_SCL */ + IMX_PIN_REG(MX6Q_PAD_EIM_EB2, 0x03A0, 0x008C, 7, 0x0000, 0), /* MX6Q_PAD_EIM_EB2__SRC_BT_CFG_30 */ + IMX_PIN_REG(MX6Q_PAD_EIM_D16, 0x03A4, 0x0090, 0, 0x0000, 0), /* MX6Q_PAD_EIM_D16__WEIM_WEIM_D_16 */ + IMX_PIN_REG(MX6Q_PAD_EIM_D16, 0x03A4, 0x0090, 1, 0x07F4, 0), /* MX6Q_PAD_EIM_D16__ECSPI1_SCLK */ + IMX_PIN_REG(MX6Q_PAD_EIM_D16, 0x03A4, 0x0090, 2, 0x0000, 0), /* MX6Q_PAD_EIM_D16__IPU1_DI0_PIN5 */ + IMX_PIN_REG(MX6Q_PAD_EIM_D16, 0x03A4, 0x0090, 3, 0x08D0, 0), /* MX6Q_PAD_EIM_D16__IPU2_CSI1_D_18 */ + IMX_PIN_REG(MX6Q_PAD_EIM_D16, 0x03A4, 0x0090, 4, 0x0894, 0), /* MX6Q_PAD_EIM_D16__HDMI_TX_DDC_SDA */ + IMX_PIN_REG(MX6Q_PAD_EIM_D16, 0x03A4, 0x0090, 5, 0x0000, 0), /* MX6Q_PAD_EIM_D16__GPIO_3_16 */ + IMX_PIN_REG(MX6Q_PAD_EIM_D16, 0x03A4, 0x0090, 6, 0x08A4, 0), /* MX6Q_PAD_EIM_D16__I2C2_SDA */ + IMX_PIN_REG(MX6Q_PAD_EIM_D17, 0x03A8, 0x0094, 0, 0x0000, 0), /* MX6Q_PAD_EIM_D17__WEIM_WEIM_D_17 */ + IMX_PIN_REG(MX6Q_PAD_EIM_D17, 0x03A8, 0x0094, 1, 0x07F8, 0), /* MX6Q_PAD_EIM_D17__ECSPI1_MISO */ + IMX_PIN_REG(MX6Q_PAD_EIM_D17, 0x03A8, 0x0094, 2, 0x0000, 0), /* MX6Q_PAD_EIM_D17__IPU1_DI0_PIN6 */ + IMX_PIN_REG(MX6Q_PAD_EIM_D17, 0x03A8, 0x0094, 3, 0x08E0, 0), /* MX6Q_PAD_EIM_D17__IPU2_CSI1_PIXCLK */ + IMX_PIN_REG(MX6Q_PAD_EIM_D17, 0x03A8, 0x0094, 4, 0x0000, 0), /* MX6Q_PAD_EIM_D17__DCIC1_DCIC_OUT */ + IMX_PIN_REG(MX6Q_PAD_EIM_D17, 0x03A8, 0x0094, 5, 0x0000, 0), /* MX6Q_PAD_EIM_D17__GPIO_3_17 */ + IMX_PIN_REG(MX6Q_PAD_EIM_D17, 0x03A8, 0x0094, 6, 0x08A8, 0), /* MX6Q_PAD_EIM_D17__I2C3_SCL */ + IMX_PIN_REG(MX6Q_PAD_EIM_D17, 0x03A8, 0x0094, 7, 0x0000, 0), /* MX6Q_PAD_EIM_D17__PL301_PER1_HBURST_1 */ + IMX_PIN_REG(MX6Q_PAD_EIM_D18, 0x03AC, 0x0098, 0, 0x0000, 0), /* MX6Q_PAD_EIM_D18__WEIM_WEIM_D_18 */ + IMX_PIN_REG(MX6Q_PAD_EIM_D18, 0x03AC, 0x0098, 1, 0x07FC, 0), /* MX6Q_PAD_EIM_D18__ECSPI1_MOSI */ + IMX_PIN_REG(MX6Q_PAD_EIM_D18, 0x03AC, 0x0098, 2, 0x0000, 0), /* MX6Q_PAD_EIM_D18__IPU1_DI0_PIN7 */ + IMX_PIN_REG(MX6Q_PAD_EIM_D18, 0x03AC, 0x0098, 3, 0x08CC, 0), /* MX6Q_PAD_EIM_D18__IPU2_CSI1_D_17 */ + IMX_PIN_REG(MX6Q_PAD_EIM_D18, 0x03AC, 0x0098, 4, 0x0000, 0), /* MX6Q_PAD_EIM_D18__IPU1_DI1_D0_CS */ + IMX_PIN_REG(MX6Q_PAD_EIM_D18, 0x03AC, 0x0098, 5, 0x0000, 0), /* MX6Q_PAD_EIM_D18__GPIO_3_18 */ + IMX_PIN_REG(MX6Q_PAD_EIM_D18, 0x03AC, 0x0098, 6, 0x08AC, 0), /* MX6Q_PAD_EIM_D18__I2C3_SDA */ + IMX_PIN_REG(MX6Q_PAD_EIM_D18, 0x03AC, 0x0098, 7, 0x0000, 0), /* MX6Q_PAD_EIM_D18__PL301_PER1_HBURST_2 */ + IMX_PIN_REG(MX6Q_PAD_EIM_D19, 0x03B0, 0x009C, 0, 0x0000, 0), /* MX6Q_PAD_EIM_D19__WEIM_WEIM_D_19 */ + IMX_PIN_REG(MX6Q_PAD_EIM_D19, 0x03B0, 0x009C, 1, 0x0804, 0), /* MX6Q_PAD_EIM_D19__ECSPI1_SS1 */ + IMX_PIN_REG(MX6Q_PAD_EIM_D19, 0x03B0, 0x009C, 2, 0x0000, 0), /* MX6Q_PAD_EIM_D19__IPU1_DI0_PIN8 */ + IMX_PIN_REG(MX6Q_PAD_EIM_D19, 0x03B0, 0x009C, 3, 0x08C8, 0), /* MX6Q_PAD_EIM_D19__IPU2_CSI1_D_16 */ + IMX_PIN_REG(MX6Q_PAD_EIM_D19, 0x03B0, 0x009C, 4, 0x091C, 0), /* MX6Q_PAD_EIM_D19__UART1_CTS */ + IMX_PIN_REG(MX6Q_PAD_EIM_D19, 0x03B0, 0x009C, 5, 0x0000, 0), /* MX6Q_PAD_EIM_D19__GPIO_3_19 */ + IMX_PIN_REG(MX6Q_PAD_EIM_D19, 0x03B0, 0x009C, 6, 0x0000, 0), /* MX6Q_PAD_EIM_D19__EPIT1_EPITO */ + IMX_PIN_REG(MX6Q_PAD_EIM_D19, 0x03B0, 0x009C, 7, 0x0000, 0), /* MX6Q_PAD_EIM_D19__PL301_PER1_HRESP */ + IMX_PIN_REG(MX6Q_PAD_EIM_D20, 0x03B4, 0x00A0, 0, 0x0000, 0), /* MX6Q_PAD_EIM_D20__WEIM_WEIM_D_20 */ + IMX_PIN_REG(MX6Q_PAD_EIM_D20, 0x03B4, 0x00A0, 1, 0x0824, 0), /* MX6Q_PAD_EIM_D20__ECSPI4_SS0 */ + IMX_PIN_REG(MX6Q_PAD_EIM_D20, 0x03B4, 0x00A0, 2, 0x0000, 0), /* MX6Q_PAD_EIM_D20__IPU1_DI0_PIN16 */ + IMX_PIN_REG(MX6Q_PAD_EIM_D20, 0x03B4, 0x00A0, 3, 0x08C4, 0), /* MX6Q_PAD_EIM_D20__IPU2_CSI1_D_15 */ + IMX_PIN_REG(MX6Q_PAD_EIM_D20, 0x03B4, 0x00A0, 4, 0x091C, 1), /* MX6Q_PAD_EIM_D20__UART1_RTS */ + IMX_PIN_REG(MX6Q_PAD_EIM_D20, 0x03B4, 0x00A0, 5, 0x0000, 0), /* MX6Q_PAD_EIM_D20__GPIO_3_20 */ + IMX_PIN_REG(MX6Q_PAD_EIM_D20, 0x03B4, 0x00A0, 6, 0x0000, 0), /* MX6Q_PAD_EIM_D20__EPIT2_EPITO */ + IMX_PIN_REG(MX6Q_PAD_EIM_D21, 0x03B8, 0x00A4, 0, 0x0000, 0), /* MX6Q_PAD_EIM_D21__WEIM_WEIM_D_21 */ + IMX_PIN_REG(MX6Q_PAD_EIM_D21, 0x03B8, 0x00A4, 1, 0x0000, 0), /* MX6Q_PAD_EIM_D21__ECSPI4_SCLK */ + IMX_PIN_REG(MX6Q_PAD_EIM_D21, 0x03B8, 0x00A4, 2, 0x0000, 0), /* MX6Q_PAD_EIM_D21__IPU1_DI0_PIN17 */ + IMX_PIN_REG(MX6Q_PAD_EIM_D21, 0x03B8, 0x00A4, 3, 0x08B4, 0), /* MX6Q_PAD_EIM_D21__IPU2_CSI1_D_11 */ + IMX_PIN_REG(MX6Q_PAD_EIM_D21, 0x03B8, 0x00A4, 4, 0x0944, 0), /* MX6Q_PAD_EIM_D21__USBOH3_USBOTG_OC */ + IMX_PIN_REG(MX6Q_PAD_EIM_D21, 0x03B8, 0x00A4, 5, 0x0000, 0), /* MX6Q_PAD_EIM_D21__GPIO_3_21 */ + IMX_PIN_REG(MX6Q_PAD_EIM_D21, 0x03B8, 0x00A4, 6, 0x0898, 0), /* MX6Q_PAD_EIM_D21__I2C1_SCL */ + IMX_PIN_REG(MX6Q_PAD_EIM_D21, 0x03B8, 0x00A4, 7, 0x0914, 0), /* MX6Q_PAD_EIM_D21__SPDIF_IN1 */ + IMX_PIN_REG(MX6Q_PAD_EIM_D22, 0x03BC, 0x00A8, 0, 0x0000, 0), /* MX6Q_PAD_EIM_D22__WEIM_WEIM_D_22 */ + IMX_PIN_REG(MX6Q_PAD_EIM_D22, 0x03BC, 0x00A8, 1, 0x0000, 0), /* MX6Q_PAD_EIM_D22__ECSPI4_MISO */ + IMX_PIN_REG(MX6Q_PAD_EIM_D22, 0x03BC, 0x00A8, 2, 0x0000, 0), /* MX6Q_PAD_EIM_D22__IPU1_DI0_PIN1 */ + IMX_PIN_REG(MX6Q_PAD_EIM_D22, 0x03BC, 0x00A8, 3, 0x08B0, 0), /* MX6Q_PAD_EIM_D22__IPU2_CSI1_D_10 */ + IMX_PIN_REG(MX6Q_PAD_EIM_D22, 0x03BC, 0x00A8, 4, 0x0000, 0), /* MX6Q_PAD_EIM_D22__USBOH3_USBOTG_PWR */ + IMX_PIN_REG(MX6Q_PAD_EIM_D22, 0x03BC, 0x00A8, 5, 0x0000, 0), /* MX6Q_PAD_EIM_D22__GPIO_3_22 */ + IMX_PIN_REG(MX6Q_PAD_EIM_D22, 0x03BC, 0x00A8, 6, 0x0000, 0), /* MX6Q_PAD_EIM_D22__SPDIF_OUT1 */ + IMX_PIN_REG(MX6Q_PAD_EIM_D22, 0x03BC, 0x00A8, 7, 0x0000, 0), /* MX6Q_PAD_EIM_D22__PL301_PER1_HWRITE */ + IMX_PIN_REG(MX6Q_PAD_EIM_D23, 0x03C0, 0x00AC, 0, 0x0000, 0), /* MX6Q_PAD_EIM_D23__WEIM_WEIM_D_23 */ + IMX_PIN_REG(MX6Q_PAD_EIM_D23, 0x03C0, 0x00AC, 1, 0x0000, 0), /* MX6Q_PAD_EIM_D23__IPU1_DI0_D0_CS */ + IMX_PIN_REG(MX6Q_PAD_EIM_D23, 0x03C0, 0x00AC, 2, 0x092C, 0), /* MX6Q_PAD_EIM_D23__UART3_CTS */ + IMX_PIN_REG(MX6Q_PAD_EIM_D23, 0x03C0, 0x00AC, 3, 0x0000, 0), /* MX6Q_PAD_EIM_D23__UART1_DCD */ + IMX_PIN_REG(MX6Q_PAD_EIM_D23, 0x03C0, 0x00AC, 4, 0x08D8, 0), /* MX6Q_PAD_EIM_D23__IPU2_CSI1_DATA_EN */ + IMX_PIN_REG(MX6Q_PAD_EIM_D23, 0x03C0, 0x00AC, 5, 0x0000, 0), /* MX6Q_PAD_EIM_D23__GPIO_3_23 */ + IMX_PIN_REG(MX6Q_PAD_EIM_D23, 0x03C0, 0x00AC, 6, 0x0000, 0), /* MX6Q_PAD_EIM_D23__IPU1_DI1_PIN2 */ + IMX_PIN_REG(MX6Q_PAD_EIM_D23, 0x03C0, 0x00AC, 7, 0x0000, 0), /* MX6Q_PAD_EIM_D23__IPU1_DI1_PIN14 */ + IMX_PIN_REG(MX6Q_PAD_EIM_EB3, 0x03C4, 0x00B0, 0, 0x0000, 0), /* MX6Q_PAD_EIM_EB3__WEIM_WEIM_EB_3 */ + IMX_PIN_REG(MX6Q_PAD_EIM_EB3, 0x03C4, 0x00B0, 1, 0x0000, 0), /* MX6Q_PAD_EIM_EB3__ECSPI4_RDY */ + IMX_PIN_REG(MX6Q_PAD_EIM_EB3, 0x03C4, 0x00B0, 2, 0x092C, 1), /* MX6Q_PAD_EIM_EB3__UART3_RTS */ + IMX_PIN_REG(MX6Q_PAD_EIM_EB3, 0x03C4, 0x00B0, 3, 0x0000, 0), /* MX6Q_PAD_EIM_EB3__UART1_RI */ + IMX_PIN_REG(MX6Q_PAD_EIM_EB3, 0x03C4, 0x00B0, 4, 0x08DC, 0), /* MX6Q_PAD_EIM_EB3__IPU2_CSI1_HSYNC */ + IMX_PIN_REG(MX6Q_PAD_EIM_EB3, 0x03C4, 0x00B0, 5, 0x0000, 0), /* MX6Q_PAD_EIM_EB3__GPIO_2_31 */ + IMX_PIN_REG(MX6Q_PAD_EIM_EB3, 0x03C4, 0x00B0, 6, 0x0000, 0), /* MX6Q_PAD_EIM_EB3__IPU1_DI1_PIN3 */ + IMX_PIN_REG(MX6Q_PAD_EIM_EB3, 0x03C4, 0x00B0, 7, 0x0000, 0), /* MX6Q_PAD_EIM_EB3__SRC_BT_CFG_31 */ + IMX_PIN_REG(MX6Q_PAD_EIM_D24, 0x03C8, 0x00B4, 0, 0x0000, 0), /* MX6Q_PAD_EIM_D24__WEIM_WEIM_D_24 */ + IMX_PIN_REG(MX6Q_PAD_EIM_D24, 0x03C8, 0x00B4, 1, 0x0000, 0), /* MX6Q_PAD_EIM_D24__ECSPI4_SS2 */ + IMX_PIN_REG(MX6Q_PAD_EIM_D24, 0x03C8, 0x00B4, 2, 0x0000, 0), /* MX6Q_PAD_EIM_D24__UART3_TXD */ + IMX_PIN_REG(MX6Q_PAD_EIM_D24, 0x03C8, 0x00B4, 3, 0x0808, 0), /* MX6Q_PAD_EIM_D24__ECSPI1_SS2 */ + IMX_PIN_REG(MX6Q_PAD_EIM_D24, 0x03C8, 0x00B4, 4, 0x0000, 0), /* MX6Q_PAD_EIM_D24__ECSPI2_SS2 */ + IMX_PIN_REG(MX6Q_PAD_EIM_D24, 0x03C8, 0x00B4, 5, 0x0000, 0), /* MX6Q_PAD_EIM_D24__GPIO_3_24 */ + IMX_PIN_REG(MX6Q_PAD_EIM_D24, 0x03C8, 0x00B4, 6, 0x07D8, 0), /* MX6Q_PAD_EIM_D24__AUDMUX_AUD5_RXFS */ + IMX_PIN_REG(MX6Q_PAD_EIM_D24, 0x03C8, 0x00B4, 7, 0x0000, 0), /* MX6Q_PAD_EIM_D24__UART1_DTR */ + IMX_PIN_REG(MX6Q_PAD_EIM_D25, 0x03CC, 0x00B8, 0, 0x0000, 0), /* MX6Q_PAD_EIM_D25__WEIM_WEIM_D_25 */ + IMX_PIN_REG(MX6Q_PAD_EIM_D25, 0x03CC, 0x00B8, 1, 0x0000, 0), /* MX6Q_PAD_EIM_D25__ECSPI4_SS3 */ + IMX_PIN_REG(MX6Q_PAD_EIM_D25, 0x03CC, 0x00B8, 2, 0x0930, 1), /* MX6Q_PAD_EIM_D25__UART3_RXD */ + IMX_PIN_REG(MX6Q_PAD_EIM_D25, 0x03CC, 0x00B8, 3, 0x080C, 0), /* MX6Q_PAD_EIM_D25__ECSPI1_SS3 */ + IMX_PIN_REG(MX6Q_PAD_EIM_D25, 0x03CC, 0x00B8, 4, 0x0000, 0), /* MX6Q_PAD_EIM_D25__ECSPI2_SS3 */ + IMX_PIN_REG(MX6Q_PAD_EIM_D25, 0x03CC, 0x00B8, 5, 0x0000, 0), /* MX6Q_PAD_EIM_D25__GPIO_3_25 */ + IMX_PIN_REG(MX6Q_PAD_EIM_D25, 0x03CC, 0x00B8, 6, 0x07D4, 0), /* MX6Q_PAD_EIM_D25__AUDMUX_AUD5_RXC */ + IMX_PIN_REG(MX6Q_PAD_EIM_D25, 0x03CC, 0x00B8, 7, 0x0000, 0), /* MX6Q_PAD_EIM_D25__UART1_DSR */ + IMX_PIN_REG(MX6Q_PAD_EIM_D26, 0x03D0, 0x00BC, 0, 0x0000, 0), /* MX6Q_PAD_EIM_D26__WEIM_WEIM_D_26 */ + IMX_PIN_REG(MX6Q_PAD_EIM_D26, 0x03D0, 0x00BC, 1, 0x0000, 0), /* MX6Q_PAD_EIM_D26__IPU1_DI1_PIN11 */ + IMX_PIN_REG(MX6Q_PAD_EIM_D26, 0x03D0, 0x00BC, 2, 0x0000, 0), /* MX6Q_PAD_EIM_D26__IPU1_CSI0_D_1 */ + IMX_PIN_REG(MX6Q_PAD_EIM_D26, 0x03D0, 0x00BC, 3, 0x08C0, 0), /* MX6Q_PAD_EIM_D26__IPU2_CSI1_D_14 */ + IMX_PIN_REG(MX6Q_PAD_EIM_D26, 0x03D0, 0x00BC, 4, 0x0000, 0), /* MX6Q_PAD_EIM_D26__UART2_TXD */ + IMX_PIN_REG(MX6Q_PAD_EIM_D26, 0x03D0, 0x00BC, 5, 0x0000, 0), /* MX6Q_PAD_EIM_D26__GPIO_3_26 */ + IMX_PIN_REG(MX6Q_PAD_EIM_D26, 0x03D0, 0x00BC, 6, 0x0000, 0), /* MX6Q_PAD_EIM_D26__IPU1_SISG_2 */ + IMX_PIN_REG(MX6Q_PAD_EIM_D26, 0x03D0, 0x00BC, 7, 0x0000, 0), /* MX6Q_PAD_EIM_D26__IPU1_DISP1_DAT_22 */ + IMX_PIN_REG(MX6Q_PAD_EIM_D27, 0x03D4, 0x00C0, 0, 0x0000, 0), /* MX6Q_PAD_EIM_D27__WEIM_WEIM_D_27 */ + IMX_PIN_REG(MX6Q_PAD_EIM_D27, 0x03D4, 0x00C0, 1, 0x0000, 0), /* MX6Q_PAD_EIM_D27__IPU1_DI1_PIN13 */ + IMX_PIN_REG(MX6Q_PAD_EIM_D27, 0x03D4, 0x00C0, 2, 0x0000, 0), /* MX6Q_PAD_EIM_D27__IPU1_CSI0_D_0 */ + IMX_PIN_REG(MX6Q_PAD_EIM_D27, 0x03D4, 0x00C0, 3, 0x08BC, 0), /* MX6Q_PAD_EIM_D27__IPU2_CSI1_D_13 */ + IMX_PIN_REG(MX6Q_PAD_EIM_D27, 0x03D4, 0x00C0, 4, 0x0928, 1), /* MX6Q_PAD_EIM_D27__UART2_RXD */ + IMX_PIN_REG(MX6Q_PAD_EIM_D27, 0x03D4, 0x00C0, 5, 0x0000, 0), /* MX6Q_PAD_EIM_D27__GPIO_3_27 */ + IMX_PIN_REG(MX6Q_PAD_EIM_D27, 0x03D4, 0x00C0, 6, 0x0000, 0), /* MX6Q_PAD_EIM_D27__IPU1_SISG_3 */ + IMX_PIN_REG(MX6Q_PAD_EIM_D27, 0x03D4, 0x00C0, 7, 0x0000, 0), /* MX6Q_PAD_EIM_D27__IPU1_DISP1_DAT_23 */ + IMX_PIN_REG(MX6Q_PAD_EIM_D28, 0x03D8, 0x00C4, 0, 0x0000, 0), /* MX6Q_PAD_EIM_D28__WEIM_WEIM_D_28 */ + IMX_PIN_REG(MX6Q_PAD_EIM_D28, 0x03D8, 0x00C4, 1, 0x089C, 0), /* MX6Q_PAD_EIM_D28__I2C1_SDA */ + IMX_PIN_REG(MX6Q_PAD_EIM_D28, 0x03D8, 0x00C4, 2, 0x0000, 0), /* MX6Q_PAD_EIM_D28__ECSPI4_MOSI */ + IMX_PIN_REG(MX6Q_PAD_EIM_D28, 0x03D8, 0x00C4, 3, 0x08B8, 0), /* MX6Q_PAD_EIM_D28__IPU2_CSI1_D_12 */ + IMX_PIN_REG(MX6Q_PAD_EIM_D28, 0x03D8, 0x00C4, 4, 0x0924, 0), /* MX6Q_PAD_EIM_D28__UART2_CTS */ + IMX_PIN_REG(MX6Q_PAD_EIM_D28, 0x03D8, 0x00C4, 5, 0x0000, 0), /* MX6Q_PAD_EIM_D28__GPIO_3_28 */ + IMX_PIN_REG(MX6Q_PAD_EIM_D28, 0x03D8, 0x00C4, 6, 0x0000, 0), /* MX6Q_PAD_EIM_D28__IPU1_EXT_TRIG */ + IMX_PIN_REG(MX6Q_PAD_EIM_D28, 0x03D8, 0x00C4, 7, 0x0000, 0), /* MX6Q_PAD_EIM_D28__IPU1_DI0_PIN13 */ + IMX_PIN_REG(MX6Q_PAD_EIM_D29, 0x03DC, 0x00C8, 0, 0x0000, 0), /* MX6Q_PAD_EIM_D29__WEIM_WEIM_D_29 */ + IMX_PIN_REG(MX6Q_PAD_EIM_D29, 0x03DC, 0x00C8, 1, 0x0000, 0), /* MX6Q_PAD_EIM_D29__IPU1_DI1_PIN15 */ + IMX_PIN_REG(MX6Q_PAD_EIM_D29, 0x03DC, 0x00C8, 2, 0x0824, 1), /* MX6Q_PAD_EIM_D29__ECSPI4_SS0 */ + IMX_PIN_REG(MX6Q_PAD_EIM_D29, 0x03DC, 0x00C8, 4, 0x0924, 1), /* MX6Q_PAD_EIM_D29__UART2_RTS */ + IMX_PIN_REG(MX6Q_PAD_EIM_D29, 0x03DC, 0x00C8, 5, 0x0000, 0), /* MX6Q_PAD_EIM_D29__GPIO_3_29 */ + IMX_PIN_REG(MX6Q_PAD_EIM_D29, 0x03DC, 0x00C8, 6, 0x08E4, 0), /* MX6Q_PAD_EIM_D29__IPU2_CSI1_VSYNC */ + IMX_PIN_REG(MX6Q_PAD_EIM_D29, 0x03DC, 0x00C8, 7, 0x0000, 0), /* MX6Q_PAD_EIM_D29__IPU1_DI0_PIN14 */ + IMX_PIN_REG(MX6Q_PAD_EIM_D30, 0x03E0, 0x00CC, 0, 0x0000, 0), /* MX6Q_PAD_EIM_D30__WEIM_WEIM_D_30 */ + IMX_PIN_REG(MX6Q_PAD_EIM_D30, 0x03E0, 0x00CC, 1, 0x0000, 0), /* MX6Q_PAD_EIM_D30__IPU1_DISP1_DAT_21 */ + IMX_PIN_REG(MX6Q_PAD_EIM_D30, 0x03E0, 0x00CC, 2, 0x0000, 0), /* MX6Q_PAD_EIM_D30__IPU1_DI0_PIN11 */ + IMX_PIN_REG(MX6Q_PAD_EIM_D30, 0x03E0, 0x00CC, 3, 0x0000, 0), /* MX6Q_PAD_EIM_D30__IPU1_CSI0_D_3 */ + IMX_PIN_REG(MX6Q_PAD_EIM_D30, 0x03E0, 0x00CC, 4, 0x092C, 2), /* MX6Q_PAD_EIM_D30__UART3_CTS */ + IMX_PIN_REG(MX6Q_PAD_EIM_D30, 0x03E0, 0x00CC, 5, 0x0000, 0), /* MX6Q_PAD_EIM_D30__GPIO_3_30 */ + IMX_PIN_REG(MX6Q_PAD_EIM_D30, 0x03E0, 0x00CC, 6, 0x0948, 0), /* MX6Q_PAD_EIM_D30__USBOH3_USBH1_OC */ + IMX_PIN_REG(MX6Q_PAD_EIM_D30, 0x03E0, 0x00CC, 7, 0x0000, 0), /* MX6Q_PAD_EIM_D30__PL301_PER1_HPROT_0 */ + IMX_PIN_REG(MX6Q_PAD_EIM_D31, 0x03E4, 0x00D0, 0, 0x0000, 0), /* MX6Q_PAD_EIM_D31__WEIM_WEIM_D_31 */ + IMX_PIN_REG(MX6Q_PAD_EIM_D31, 0x03E4, 0x00D0, 1, 0x0000, 0), /* MX6Q_PAD_EIM_D31__IPU1_DISP1_DAT_20 */ + IMX_PIN_REG(MX6Q_PAD_EIM_D31, 0x03E4, 0x00D0, 2, 0x0000, 0), /* MX6Q_PAD_EIM_D31__IPU1_DI0_PIN12 */ + IMX_PIN_REG(MX6Q_PAD_EIM_D31, 0x03E4, 0x00D0, 3, 0x0000, 0), /* MX6Q_PAD_EIM_D31__IPU1_CSI0_D_2 */ + IMX_PIN_REG(MX6Q_PAD_EIM_D31, 0x03E4, 0x00D0, 4, 0x092C, 3), /* MX6Q_PAD_EIM_D31__UART3_RTS */ + IMX_PIN_REG(MX6Q_PAD_EIM_D31, 0x03E4, 0x00D0, 5, 0x0000, 0), /* MX6Q_PAD_EIM_D31__GPIO_3_31 */ + IMX_PIN_REG(MX6Q_PAD_EIM_D31, 0x03E4, 0x00D0, 6, 0x0000, 0), /* MX6Q_PAD_EIM_D31__USBOH3_USBH1_PWR */ + IMX_PIN_REG(MX6Q_PAD_EIM_D31, 0x03E4, 0x00D0, 7, 0x0000, 0), /* MX6Q_PAD_EIM_D31__PL301_PER1_HPROT_1 */ + IMX_PIN_REG(MX6Q_PAD_EIM_A24, 0x03E8, 0x00D4, 0, 0x0000, 0), /* MX6Q_PAD_EIM_A24__WEIM_WEIM_A_24 */ + IMX_PIN_REG(MX6Q_PAD_EIM_A24, 0x03E8, 0x00D4, 1, 0x0000, 0), /* MX6Q_PAD_EIM_A24__IPU1_DISP1_DAT_19 */ + IMX_PIN_REG(MX6Q_PAD_EIM_A24, 0x03E8, 0x00D4, 2, 0x08D4, 1), /* MX6Q_PAD_EIM_A24__IPU2_CSI1_D_19 */ + IMX_PIN_REG(MX6Q_PAD_EIM_A24, 0x03E8, 0x00D4, 3, 0x0000, 0), /* MX6Q_PAD_EIM_A24__IPU2_SISG_2 */ + IMX_PIN_REG(MX6Q_PAD_EIM_A24, 0x03E8, 0x00D4, 4, 0x0000, 0), /* MX6Q_PAD_EIM_A24__IPU1_SISG_2 */ + IMX_PIN_REG(MX6Q_PAD_EIM_A24, 0x03E8, 0x00D4, 5, 0x0000, 0), /* MX6Q_PAD_EIM_A24__GPIO_5_4 */ + IMX_PIN_REG(MX6Q_PAD_EIM_A24, 0x03E8, 0x00D4, 6, 0x0000, 0), /* MX6Q_PAD_EIM_A24__PL301_PER1_HPROT_2 */ + IMX_PIN_REG(MX6Q_PAD_EIM_A24, 0x03E8, 0x00D4, 7, 0x0000, 0), /* MX6Q_PAD_EIM_A24__SRC_BT_CFG_24 */ + IMX_PIN_REG(MX6Q_PAD_EIM_A23, 0x03EC, 0x00D8, 0, 0x0000, 0), /* MX6Q_PAD_EIM_A23__WEIM_WEIM_A_23 */ + IMX_PIN_REG(MX6Q_PAD_EIM_A23, 0x03EC, 0x00D8, 1, 0x0000, 0), /* MX6Q_PAD_EIM_A23__IPU1_DISP1_DAT_18 */ + IMX_PIN_REG(MX6Q_PAD_EIM_A23, 0x03EC, 0x00D8, 2, 0x08D0, 1), /* MX6Q_PAD_EIM_A23__IPU2_CSI1_D_18 */ + IMX_PIN_REG(MX6Q_PAD_EIM_A23, 0x03EC, 0x00D8, 3, 0x0000, 0), /* MX6Q_PAD_EIM_A23__IPU2_SISG_3 */ + IMX_PIN_REG(MX6Q_PAD_EIM_A23, 0x03EC, 0x00D8, 4, 0x0000, 0), /* MX6Q_PAD_EIM_A23__IPU1_SISG_3 */ + IMX_PIN_REG(MX6Q_PAD_EIM_A23, 0x03EC, 0x00D8, 5, 0x0000, 0), /* MX6Q_PAD_EIM_A23__GPIO_6_6 */ + IMX_PIN_REG(MX6Q_PAD_EIM_A23, 0x03EC, 0x00D8, 6, 0x0000, 0), /* MX6Q_PAD_EIM_A23__PL301_PER1_HPROT_3 */ + IMX_PIN_REG(MX6Q_PAD_EIM_A23, 0x03EC, 0x00D8, 7, 0x0000, 0), /* MX6Q_PAD_EIM_A23__SRC_BT_CFG_23 */ + IMX_PIN_REG(MX6Q_PAD_EIM_A22, 0x03F0, 0x00DC, 0, 0x0000, 0), /* MX6Q_PAD_EIM_A22__WEIM_WEIM_A_22 */ + IMX_PIN_REG(MX6Q_PAD_EIM_A22, 0x03F0, 0x00DC, 1, 0x0000, 0), /* MX6Q_PAD_EIM_A22__IPU1_DISP1_DAT_17 */ + IMX_PIN_REG(MX6Q_PAD_EIM_A22, 0x03F0, 0x00DC, 2, 0x08CC, 1), /* MX6Q_PAD_EIM_A22__IPU2_CSI1_D_17 */ + IMX_PIN_REG(MX6Q_PAD_EIM_A22, 0x03F0, 0x00DC, 5, 0x0000, 0), /* MX6Q_PAD_EIM_A22__GPIO_2_16 */ + IMX_PIN_REG(MX6Q_PAD_EIM_A22, 0x03F0, 0x00DC, 6, 0x0000, 0), /* MX6Q_PAD_EIM_A22__TPSMP_HDATA_0 */ + IMX_PIN_REG(MX6Q_PAD_EIM_A22, 0x03F0, 0x00DC, 7, 0x0000, 0), /* MX6Q_PAD_EIM_A22__SRC_BT_CFG_22 */ + IMX_PIN_REG(MX6Q_PAD_EIM_A21, 0x03F4, 0x00E0, 0, 0x0000, 0), /* MX6Q_PAD_EIM_A21__WEIM_WEIM_A_21 */ + IMX_PIN_REG(MX6Q_PAD_EIM_A21, 0x03F4, 0x00E0, 1, 0x0000, 0), /* MX6Q_PAD_EIM_A21__IPU1_DISP1_DAT_16 */ + IMX_PIN_REG(MX6Q_PAD_EIM_A21, 0x03F4, 0x00E0, 2, 0x08C8, 1), /* MX6Q_PAD_EIM_A21__IPU2_CSI1_D_16 */ + IMX_PIN_REG(MX6Q_PAD_EIM_A21, 0x03F4, 0x00E0, 3, 0x0000, 0), /* MX6Q_PAD_EIM_A21__RESERVED_RESERVED */ + IMX_PIN_REG(MX6Q_PAD_EIM_A21, 0x03F4, 0x00E0, 4, 0x0000, 0), /* MX6Q_PAD_EIM_A21__MIPI_CORE_DPHY_OUT_18 */ + IMX_PIN_REG(MX6Q_PAD_EIM_A21, 0x03F4, 0x00E0, 5, 0x0000, 0), /* MX6Q_PAD_EIM_A21__GPIO_2_17 */ + IMX_PIN_REG(MX6Q_PAD_EIM_A21, 0x03F4, 0x00E0, 6, 0x0000, 0), /* MX6Q_PAD_EIM_A21__TPSMP_HDATA_1 */ + IMX_PIN_REG(MX6Q_PAD_EIM_A21, 0x03F4, 0x00E0, 7, 0x0000, 0), /* MX6Q_PAD_EIM_A21__SRC_BT_CFG_21 */ + IMX_PIN_REG(MX6Q_PAD_EIM_A20, 0x03F8, 0x00E4, 0, 0x0000, 0), /* MX6Q_PAD_EIM_A20__WEIM_WEIM_A_20 */ + IMX_PIN_REG(MX6Q_PAD_EIM_A20, 0x03F8, 0x00E4, 1, 0x0000, 0), /* MX6Q_PAD_EIM_A20__IPU1_DISP1_DAT_15 */ + IMX_PIN_REG(MX6Q_PAD_EIM_A20, 0x03F8, 0x00E4, 2, 0x08C4, 1), /* MX6Q_PAD_EIM_A20__IPU2_CSI1_D_15 */ + IMX_PIN_REG(MX6Q_PAD_EIM_A20, 0x03F8, 0x00E4, 3, 0x0000, 0), /* MX6Q_PAD_EIM_A20__RESERVED_RESERVED */ + IMX_PIN_REG(MX6Q_PAD_EIM_A20, 0x03F8, 0x00E4, 4, 0x0000, 0), /* MX6Q_PAD_EIM_A20__MIPI_CORE_DPHY_OUT_19 */ + IMX_PIN_REG(MX6Q_PAD_EIM_A20, 0x03F8, 0x00E4, 5, 0x0000, 0), /* MX6Q_PAD_EIM_A20__GPIO_2_18 */ + IMX_PIN_REG(MX6Q_PAD_EIM_A20, 0x03F8, 0x00E4, 6, 0x0000, 0), /* MX6Q_PAD_EIM_A20__TPSMP_HDATA_2 */ + IMX_PIN_REG(MX6Q_PAD_EIM_A20, 0x03F8, 0x00E4, 7, 0x0000, 0), /* MX6Q_PAD_EIM_A20__SRC_BT_CFG_20 */ + IMX_PIN_REG(MX6Q_PAD_EIM_A19, 0x03FC, 0x00E8, 0, 0x0000, 0), /* MX6Q_PAD_EIM_A19__WEIM_WEIM_A_19 */ + IMX_PIN_REG(MX6Q_PAD_EIM_A19, 0x03FC, 0x00E8, 1, 0x0000, 0), /* MX6Q_PAD_EIM_A19__IPU1_DISP1_DAT_14 */ + IMX_PIN_REG(MX6Q_PAD_EIM_A19, 0x03FC, 0x00E8, 2, 0x08C0, 1), /* MX6Q_PAD_EIM_A19__IPU2_CSI1_D_14 */ + IMX_PIN_REG(MX6Q_PAD_EIM_A19, 0x03FC, 0x00E8, 3, 0x0000, 0), /* MX6Q_PAD_EIM_A19__RESERVED_RESERVED */ + IMX_PIN_REG(MX6Q_PAD_EIM_A19, 0x03FC, 0x00E8, 4, 0x0000, 0), /* MX6Q_PAD_EIM_A19__MIPI_CORE_DPHY_OUT_20 */ + IMX_PIN_REG(MX6Q_PAD_EIM_A19, 0x03FC, 0x00E8, 5, 0x0000, 0), /* MX6Q_PAD_EIM_A19__GPIO_2_19 */ + IMX_PIN_REG(MX6Q_PAD_EIM_A19, 0x03FC, 0x00E8, 6, 0x0000, 0), /* MX6Q_PAD_EIM_A19__TPSMP_HDATA_3 */ + IMX_PIN_REG(MX6Q_PAD_EIM_A19, 0x03FC, 0x00E8, 7, 0x0000, 0), /* MX6Q_PAD_EIM_A19__SRC_BT_CFG_19 */ + IMX_PIN_REG(MX6Q_PAD_EIM_A18, 0x0400, 0x00EC, 0, 0x0000, 0), /* MX6Q_PAD_EIM_A18__WEIM_WEIM_A_18 */ + IMX_PIN_REG(MX6Q_PAD_EIM_A18, 0x0400, 0x00EC, 1, 0x0000, 0), /* MX6Q_PAD_EIM_A18__IPU1_DISP1_DAT_13 */ + IMX_PIN_REG(MX6Q_PAD_EIM_A18, 0x0400, 0x00EC, 2, 0x08BC, 1), /* MX6Q_PAD_EIM_A18__IPU2_CSI1_D_13 */ + IMX_PIN_REG(MX6Q_PAD_EIM_A18, 0x0400, 0x00EC, 3, 0x0000, 0), /* MX6Q_PAD_EIM_A18__RESERVED_RESERVED */ + IMX_PIN_REG(MX6Q_PAD_EIM_A18, 0x0400, 0x00EC, 4, 0x0000, 0), /* MX6Q_PAD_EIM_A18__MIPI_CORE_DPHY_OUT_21 */ + IMX_PIN_REG(MX6Q_PAD_EIM_A18, 0x0400, 0x00EC, 5, 0x0000, 0), /* MX6Q_PAD_EIM_A18__GPIO_2_20 */ + IMX_PIN_REG(MX6Q_PAD_EIM_A18, 0x0400, 0x00EC, 6, 0x0000, 0), /* MX6Q_PAD_EIM_A18__TPSMP_HDATA_4 */ + IMX_PIN_REG(MX6Q_PAD_EIM_A18, 0x0400, 0x00EC, 7, 0x0000, 0), /* MX6Q_PAD_EIM_A18__SRC_BT_CFG_18 */ + IMX_PIN_REG(MX6Q_PAD_EIM_A17, 0x0404, 0x00F0, 0, 0x0000, 0), /* MX6Q_PAD_EIM_A17__WEIM_WEIM_A_17 */ + IMX_PIN_REG(MX6Q_PAD_EIM_A17, 0x0404, 0x00F0, 1, 0x0000, 0), /* MX6Q_PAD_EIM_A17__IPU1_DISP1_DAT_12 */ + IMX_PIN_REG(MX6Q_PAD_EIM_A17, 0x0404, 0x00F0, 2, 0x08B8, 1), /* MX6Q_PAD_EIM_A17__IPU2_CSI1_D_12 */ + IMX_PIN_REG(MX6Q_PAD_EIM_A17, 0x0404, 0x00F0, 3, 0x0000, 0), /* MX6Q_PAD_EIM_A17__RESERVED_RESERVED */ + IMX_PIN_REG(MX6Q_PAD_EIM_A17, 0x0404, 0x00F0, 4, 0x0000, 0), /* MX6Q_PAD_EIM_A17__MIPI_CORE_DPHY_OUT_22 */ + IMX_PIN_REG(MX6Q_PAD_EIM_A17, 0x0404, 0x00F0, 5, 0x0000, 0), /* MX6Q_PAD_EIM_A17__GPIO_2_21 */ + IMX_PIN_REG(MX6Q_PAD_EIM_A17, 0x0404, 0x00F0, 6, 0x0000, 0), /* MX6Q_PAD_EIM_A17__TPSMP_HDATA_5 */ + IMX_PIN_REG(MX6Q_PAD_EIM_A17, 0x0404, 0x00F0, 7, 0x0000, 0), /* MX6Q_PAD_EIM_A17__SRC_BT_CFG_17 */ + IMX_PIN_REG(MX6Q_PAD_EIM_A16, 0x0408, 0x00F4, 0, 0x0000, 0), /* MX6Q_PAD_EIM_A16__WEIM_WEIM_A_16 */ + IMX_PIN_REG(MX6Q_PAD_EIM_A16, 0x0408, 0x00F4, 1, 0x0000, 0), /* MX6Q_PAD_EIM_A16__IPU1_DI1_DISP_CLK */ + IMX_PIN_REG(MX6Q_PAD_EIM_A16, 0x0408, 0x00F4, 2, 0x08E0, 1), /* MX6Q_PAD_EIM_A16__IPU2_CSI1_PIXCLK */ + IMX_PIN_REG(MX6Q_PAD_EIM_A16, 0x0408, 0x00F4, 4, 0x0000, 0), /* MX6Q_PAD_EIM_A16__MIPI_CORE_DPHY_OUT_23 */ + IMX_PIN_REG(MX6Q_PAD_EIM_A16, 0x0408, 0x00F4, 5, 0x0000, 0), /* MX6Q_PAD_EIM_A16__GPIO_2_22 */ + IMX_PIN_REG(MX6Q_PAD_EIM_A16, 0x0408, 0x00F4, 6, 0x0000, 0), /* MX6Q_PAD_EIM_A16__TPSMP_HDATA_6 */ + IMX_PIN_REG(MX6Q_PAD_EIM_A16, 0x0408, 0x00F4, 7, 0x0000, 0), /* MX6Q_PAD_EIM_A16__SRC_BT_CFG_16 */ + IMX_PIN_REG(MX6Q_PAD_EIM_CS0, 0x040C, 0x00F8, 0, 0x0000, 0), /* MX6Q_PAD_EIM_CS0__WEIM_WEIM_CS_0 */ + IMX_PIN_REG(MX6Q_PAD_EIM_CS0, 0x040C, 0x00F8, 1, 0x0000, 0), /* MX6Q_PAD_EIM_CS0__IPU1_DI1_PIN5 */ + IMX_PIN_REG(MX6Q_PAD_EIM_CS0, 0x040C, 0x00F8, 2, 0x0810, 0), /* MX6Q_PAD_EIM_CS0__ECSPI2_SCLK */ + IMX_PIN_REG(MX6Q_PAD_EIM_CS0, 0x040C, 0x00F8, 4, 0x0000, 0), /* MX6Q_PAD_EIM_CS0__MIPI_CORE_DPHY_OUT_24 */ + IMX_PIN_REG(MX6Q_PAD_EIM_CS0, 0x040C, 0x00F8, 5, 0x0000, 0), /* MX6Q_PAD_EIM_CS0__GPIO_2_23 */ + IMX_PIN_REG(MX6Q_PAD_EIM_CS0, 0x040C, 0x00F8, 6, 0x0000, 0), /* MX6Q_PAD_EIM_CS0__TPSMP_HDATA_7 */ + IMX_PIN_REG(MX6Q_PAD_EIM_CS1, 0x0410, 0x00FC, 0, 0x0000, 0), /* MX6Q_PAD_EIM_CS1__WEIM_WEIM_CS_1 */ + IMX_PIN_REG(MX6Q_PAD_EIM_CS1, 0x0410, 0x00FC, 1, 0x0000, 0), /* MX6Q_PAD_EIM_CS1__IPU1_DI1_PIN6 */ + IMX_PIN_REG(MX6Q_PAD_EIM_CS1, 0x0410, 0x00FC, 2, 0x0818, 0), /* MX6Q_PAD_EIM_CS1__ECSPI2_MOSI */ + IMX_PIN_REG(MX6Q_PAD_EIM_CS1, 0x0410, 0x00FC, 4, 0x0000, 0), /* MX6Q_PAD_EIM_CS1__MIPI_CORE_DPHY_OUT_25 */ + IMX_PIN_REG(MX6Q_PAD_EIM_CS1, 0x0410, 0x00FC, 5, 0x0000, 0), /* MX6Q_PAD_EIM_CS1__GPIO_2_24 */ + IMX_PIN_REG(MX6Q_PAD_EIM_CS1, 0x0410, 0x00FC, 6, 0x0000, 0), /* MX6Q_PAD_EIM_CS1__TPSMP_HDATA_8 */ + IMX_PIN_REG(MX6Q_PAD_EIM_OE, 0x0414, 0x0100, 0, 0x0000, 0), /* MX6Q_PAD_EIM_OE__WEIM_WEIM_OE */ + IMX_PIN_REG(MX6Q_PAD_EIM_OE, 0x0414, 0x0100, 1, 0x0000, 0), /* MX6Q_PAD_EIM_OE__IPU1_DI1_PIN7 */ + IMX_PIN_REG(MX6Q_PAD_EIM_OE, 0x0414, 0x0100, 2, 0x0814, 0), /* MX6Q_PAD_EIM_OE__ECSPI2_MISO */ + IMX_PIN_REG(MX6Q_PAD_EIM_OE, 0x0414, 0x0100, 4, 0x0000, 0), /* MX6Q_PAD_EIM_OE__MIPI_CORE_DPHY_OUT_26 */ + IMX_PIN_REG(MX6Q_PAD_EIM_OE, 0x0414, 0x0100, 5, 0x0000, 0), /* MX6Q_PAD_EIM_OE__GPIO_2_25 */ + IMX_PIN_REG(MX6Q_PAD_EIM_OE, 0x0414, 0x0100, 6, 0x0000, 0), /* MX6Q_PAD_EIM_OE__TPSMP_HDATA_9 */ + IMX_PIN_REG(MX6Q_PAD_EIM_RW, 0x0418, 0x0104, 0, 0x0000, 0), /* MX6Q_PAD_EIM_RW__WEIM_WEIM_RW */ + IMX_PIN_REG(MX6Q_PAD_EIM_RW, 0x0418, 0x0104, 1, 0x0000, 0), /* MX6Q_PAD_EIM_RW__IPU1_DI1_PIN8 */ + IMX_PIN_REG(MX6Q_PAD_EIM_RW, 0x0418, 0x0104, 2, 0x081C, 0), /* MX6Q_PAD_EIM_RW__ECSPI2_SS0 */ + IMX_PIN_REG(MX6Q_PAD_EIM_RW, 0x0418, 0x0104, 4, 0x0000, 0), /* MX6Q_PAD_EIM_RW__MIPI_CORE_DPHY_OUT_27 */ + IMX_PIN_REG(MX6Q_PAD_EIM_RW, 0x0418, 0x0104, 5, 0x0000, 0), /* MX6Q_PAD_EIM_RW__GPIO_2_26 */ + IMX_PIN_REG(MX6Q_PAD_EIM_RW, 0x0418, 0x0104, 6, 0x0000, 0), /* MX6Q_PAD_EIM_RW__TPSMP_HDATA_10 */ + IMX_PIN_REG(MX6Q_PAD_EIM_RW, 0x0418, 0x0104, 7, 0x0000, 0), /* MX6Q_PAD_EIM_RW__SRC_BT_CFG_29 */ + IMX_PIN_REG(MX6Q_PAD_EIM_LBA, 0x041C, 0x0108, 0, 0x0000, 0), /* MX6Q_PAD_EIM_LBA__WEIM_WEIM_LBA */ + IMX_PIN_REG(MX6Q_PAD_EIM_LBA, 0x041C, 0x0108, 1, 0x0000, 0), /* MX6Q_PAD_EIM_LBA__IPU1_DI1_PIN17 */ + IMX_PIN_REG(MX6Q_PAD_EIM_LBA, 0x041C, 0x0108, 2, 0x0820, 0), /* MX6Q_PAD_EIM_LBA__ECSPI2_SS1 */ + IMX_PIN_REG(MX6Q_PAD_EIM_LBA, 0x041C, 0x0108, 5, 0x0000, 0), /* MX6Q_PAD_EIM_LBA__GPIO_2_27 */ + IMX_PIN_REG(MX6Q_PAD_EIM_LBA, 0x041C, 0x0108, 6, 0x0000, 0), /* MX6Q_PAD_EIM_LBA__TPSMP_HDATA_11 */ + IMX_PIN_REG(MX6Q_PAD_EIM_LBA, 0x041C, 0x0108, 7, 0x0000, 0), /* MX6Q_PAD_EIM_LBA__SRC_BT_CFG_26 */ + IMX_PIN_REG(MX6Q_PAD_EIM_EB0, 0x0420, 0x010C, 0, 0x0000, 0), /* MX6Q_PAD_EIM_EB0__WEIM_WEIM_EB_0 */ + IMX_PIN_REG(MX6Q_PAD_EIM_EB0, 0x0420, 0x010C, 1, 0x0000, 0), /* MX6Q_PAD_EIM_EB0__IPU1_DISP1_DAT_11 */ + IMX_PIN_REG(MX6Q_PAD_EIM_EB0, 0x0420, 0x010C, 2, 0x08B4, 1), /* MX6Q_PAD_EIM_EB0__IPU2_CSI1_D_11 */ + IMX_PIN_REG(MX6Q_PAD_EIM_EB0, 0x0420, 0x010C, 3, 0x0000, 0), /* MX6Q_PAD_EIM_EB0__MIPI_CORE_DPHY_OUT_0 */ + IMX_PIN_REG(MX6Q_PAD_EIM_EB0, 0x0420, 0x010C, 4, 0x07F0, 0), /* MX6Q_PAD_EIM_EB0__CCM_PMIC_RDY */ + IMX_PIN_REG(MX6Q_PAD_EIM_EB0, 0x0420, 0x010C, 5, 0x0000, 0), /* MX6Q_PAD_EIM_EB0__GPIO_2_28 */ + IMX_PIN_REG(MX6Q_PAD_EIM_EB0, 0x0420, 0x010C, 6, 0x0000, 0), /* MX6Q_PAD_EIM_EB0__TPSMP_HDATA_12 */ + IMX_PIN_REG(MX6Q_PAD_EIM_EB0, 0x0420, 0x010C, 7, 0x0000, 0), /* MX6Q_PAD_EIM_EB0__SRC_BT_CFG_27 */ + IMX_PIN_REG(MX6Q_PAD_EIM_EB1, 0x0424, 0x0110, 0, 0x0000, 0), /* MX6Q_PAD_EIM_EB1__WEIM_WEIM_EB_1 */ + IMX_PIN_REG(MX6Q_PAD_EIM_EB1, 0x0424, 0x0110, 1, 0x0000, 0), /* MX6Q_PAD_EIM_EB1__IPU1_DISP1_DAT_10 */ + IMX_PIN_REG(MX6Q_PAD_EIM_EB1, 0x0424, 0x0110, 2, 0x08B0, 1), /* MX6Q_PAD_EIM_EB1__IPU2_CSI1_D_10 */ + IMX_PIN_REG(MX6Q_PAD_EIM_EB1, 0x0424, 0x0110, 3, 0x0000, 0), /* MX6Q_PAD_EIM_EB1__MIPI_CORE_DPHY__OUT_1 */ + IMX_PIN_REG(MX6Q_PAD_EIM_EB1, 0x0424, 0x0110, 5, 0x0000, 0), /* MX6Q_PAD_EIM_EB1__GPIO_2_29 */ + IMX_PIN_REG(MX6Q_PAD_EIM_EB1, 0x0424, 0x0110, 6, 0x0000, 0), /* MX6Q_PAD_EIM_EB1__TPSMP_HDATA_13 */ + IMX_PIN_REG(MX6Q_PAD_EIM_EB1, 0x0424, 0x0110, 7, 0x0000, 0), /* MX6Q_PAD_EIM_EB1__SRC_BT_CFG_28 */ + IMX_PIN_REG(MX6Q_PAD_EIM_DA0, 0x0428, 0x0114, 0, 0x0000, 0), /* MX6Q_PAD_EIM_DA0__WEIM_WEIM_DA_A_0 */ + IMX_PIN_REG(MX6Q_PAD_EIM_DA0, 0x0428, 0x0114, 1, 0x0000, 0), /* MX6Q_PAD_EIM_DA0__IPU1_DISP1_DAT_9 */ + IMX_PIN_REG(MX6Q_PAD_EIM_DA0, 0x0428, 0x0114, 2, 0x0000, 0), /* MX6Q_PAD_EIM_DA0__IPU2_CSI1_D_9 */ + IMX_PIN_REG(MX6Q_PAD_EIM_DA0, 0x0428, 0x0114, 3, 0x0000, 0), /* MX6Q_PAD_EIM_DA0__MIPI_CORE_DPHY__OUT_2 */ + IMX_PIN_REG(MX6Q_PAD_EIM_DA0, 0x0428, 0x0114, 5, 0x0000, 0), /* MX6Q_PAD_EIM_DA0__GPIO_3_0 */ + IMX_PIN_REG(MX6Q_PAD_EIM_DA0, 0x0428, 0x0114, 6, 0x0000, 0), /* MX6Q_PAD_EIM_DA0__TPSMP_HDATA_14 */ + IMX_PIN_REG(MX6Q_PAD_EIM_DA0, 0x0428, 0x0114, 7, 0x0000, 0), /* MX6Q_PAD_EIM_DA0__SRC_BT_CFG_0 */ + IMX_PIN_REG(MX6Q_PAD_EIM_DA1, 0x042C, 0x0118, 0, 0x0000, 0), /* MX6Q_PAD_EIM_DA1__WEIM_WEIM_DA_A_1 */ + IMX_PIN_REG(MX6Q_PAD_EIM_DA1, 0x042C, 0x0118, 1, 0x0000, 0), /* MX6Q_PAD_EIM_DA1__IPU1_DISP1_DAT_8 */ + IMX_PIN_REG(MX6Q_PAD_EIM_DA1, 0x042C, 0x0118, 2, 0x0000, 0), /* MX6Q_PAD_EIM_DA1__IPU2_CSI1_D_8 */ + IMX_PIN_REG(MX6Q_PAD_EIM_DA1, 0x042C, 0x0118, 3, 0x0000, 0), /* MX6Q_PAD_EIM_DA1__MIPI_CORE_DPHY_OUT_3 */ + IMX_PIN_REG(MX6Q_PAD_EIM_DA1, 0x042C, 0x0118, 4, 0x0000, 0), /* MX6Q_PAD_EIM_DA1__USBPHY1_TX_LS_MODE */ + IMX_PIN_REG(MX6Q_PAD_EIM_DA1, 0x042C, 0x0118, 5, 0x0000, 0), /* MX6Q_PAD_EIM_DA1__GPIO_3_1 */ + IMX_PIN_REG(MX6Q_PAD_EIM_DA1, 0x042C, 0x0118, 6, 0x0000, 0), /* MX6Q_PAD_EIM_DA1__TPSMP_HDATA_15 */ + IMX_PIN_REG(MX6Q_PAD_EIM_DA1, 0x042C, 0x0118, 7, 0x0000, 0), /* MX6Q_PAD_EIM_DA1__SRC_BT_CFG_1 */ + IMX_PIN_REG(MX6Q_PAD_EIM_DA2, 0x0430, 0x011C, 0, 0x0000, 0), /* MX6Q_PAD_EIM_DA2__WEIM_WEIM_DA_A_2 */ + IMX_PIN_REG(MX6Q_PAD_EIM_DA2, 0x0430, 0x011C, 1, 0x0000, 0), /* MX6Q_PAD_EIM_DA2__IPU1_DISP1_DAT_7 */ + IMX_PIN_REG(MX6Q_PAD_EIM_DA2, 0x0430, 0x011C, 2, 0x0000, 0), /* MX6Q_PAD_EIM_DA2__IPU2_CSI1_D_7 */ + IMX_PIN_REG(MX6Q_PAD_EIM_DA2, 0x0430, 0x011C, 3, 0x0000, 0), /* MX6Q_PAD_EIM_DA2__MIPI_CORE_DPHY_OUT_4 */ + IMX_PIN_REG(MX6Q_PAD_EIM_DA2, 0x0430, 0x011C, 4, 0x0000, 0), /* MX6Q_PAD_EIM_DA2__USBPHY1_TX_HS_MODE */ + IMX_PIN_REG(MX6Q_PAD_EIM_DA2, 0x0430, 0x011C, 5, 0x0000, 0), /* MX6Q_PAD_EIM_DA2__GPIO_3_2 */ + IMX_PIN_REG(MX6Q_PAD_EIM_DA2, 0x0430, 0x011C, 6, 0x0000, 0), /* MX6Q_PAD_EIM_DA2__TPSMP_HDATA_16 */ + IMX_PIN_REG(MX6Q_PAD_EIM_DA2, 0x0430, 0x011C, 7, 0x0000, 0), /* MX6Q_PAD_EIM_DA2__SRC_BT_CFG_2 */ + IMX_PIN_REG(MX6Q_PAD_EIM_DA3, 0x0434, 0x0120, 0, 0x0000, 0), /* MX6Q_PAD_EIM_DA3__WEIM_WEIM_DA_A_3 */ + IMX_PIN_REG(MX6Q_PAD_EIM_DA3, 0x0434, 0x0120, 1, 0x0000, 0), /* MX6Q_PAD_EIM_DA3__IPU1_DISP1_DAT_6 */ + IMX_PIN_REG(MX6Q_PAD_EIM_DA3, 0x0434, 0x0120, 2, 0x0000, 0), /* MX6Q_PAD_EIM_DA3__IPU2_CSI1_D_6 */ + IMX_PIN_REG(MX6Q_PAD_EIM_DA3, 0x0434, 0x0120, 3, 0x0000, 0), /* MX6Q_PAD_EIM_DA3__MIPI_CORE_DPHY_OUT_5 */ + IMX_PIN_REG(MX6Q_PAD_EIM_DA3, 0x0434, 0x0120, 4, 0x0000, 0), /* MX6Q_PAD_EIM_DA3__USBPHY1_TX_HIZ */ + IMX_PIN_REG(MX6Q_PAD_EIM_DA3, 0x0434, 0x0120, 5, 0x0000, 0), /* MX6Q_PAD_EIM_DA3__GPIO_3_3 */ + IMX_PIN_REG(MX6Q_PAD_EIM_DA3, 0x0434, 0x0120, 6, 0x0000, 0), /* MX6Q_PAD_EIM_DA3__TPSMP_HDATA_17 */ + IMX_PIN_REG(MX6Q_PAD_EIM_DA3, 0x0434, 0x0120, 7, 0x0000, 0), /* MX6Q_PAD_EIM_DA3__SRC_BT_CFG_3 */ + IMX_PIN_REG(MX6Q_PAD_EIM_DA4, 0x0438, 0x0124, 0, 0x0000, 0), /* MX6Q_PAD_EIM_DA4__WEIM_WEIM_DA_A_4 */ + IMX_PIN_REG(MX6Q_PAD_EIM_DA4, 0x0438, 0x0124, 1, 0x0000, 0), /* MX6Q_PAD_EIM_DA4__IPU1_DISP1_DAT_5 */ + IMX_PIN_REG(MX6Q_PAD_EIM_DA4, 0x0438, 0x0124, 2, 0x0000, 0), /* MX6Q_PAD_EIM_DA4__IPU2_CSI1_D_5 */ + IMX_PIN_REG(MX6Q_PAD_EIM_DA4, 0x0438, 0x0124, 3, 0x0000, 0), /* MX6Q_PAD_EIM_DA4__MIPI_CORE_DPHY_OUT_6 */ + IMX_PIN_REG(MX6Q_PAD_EIM_DA4, 0x0438, 0x0124, 4, 0x0000, 0), /* MX6Q_PAD_EIM_DA4__ANATOP_USBPHY1_TX_EN */ + IMX_PIN_REG(MX6Q_PAD_EIM_DA4, 0x0438, 0x0124, 5, 0x0000, 0), /* MX6Q_PAD_EIM_DA4__GPIO_3_4 */ + IMX_PIN_REG(MX6Q_PAD_EIM_DA4, 0x0438, 0x0124, 6, 0x0000, 0), /* MX6Q_PAD_EIM_DA4__TPSMP_HDATA_18 */ + IMX_PIN_REG(MX6Q_PAD_EIM_DA4, 0x0438, 0x0124, 7, 0x0000, 0), /* MX6Q_PAD_EIM_DA4__SRC_BT_CFG_4 */ + IMX_PIN_REG(MX6Q_PAD_EIM_DA5, 0x043C, 0x0128, 0, 0x0000, 0), /* MX6Q_PAD_EIM_DA5__WEIM_WEIM_DA_A_5 */ + IMX_PIN_REG(MX6Q_PAD_EIM_DA5, 0x043C, 0x0128, 1, 0x0000, 0), /* MX6Q_PAD_EIM_DA5__IPU1_DISP1_DAT_4 */ + IMX_PIN_REG(MX6Q_PAD_EIM_DA5, 0x043C, 0x0128, 2, 0x0000, 0), /* MX6Q_PAD_EIM_DA5__IPU2_CSI1_D_4 */ + IMX_PIN_REG(MX6Q_PAD_EIM_DA5, 0x043C, 0x0128, 3, 0x0000, 0), /* MX6Q_PAD_EIM_DA5__MIPI_CORE_DPHY_OUT_7 */ + IMX_PIN_REG(MX6Q_PAD_EIM_DA5, 0x043C, 0x0128, 4, 0x0000, 0), /* MX6Q_PAD_EIM_DA5__ANATOP_USBPHY1_TX_DP */ + IMX_PIN_REG(MX6Q_PAD_EIM_DA5, 0x043C, 0x0128, 5, 0x0000, 0), /* MX6Q_PAD_EIM_DA5__GPIO_3_5 */ + IMX_PIN_REG(MX6Q_PAD_EIM_DA5, 0x043C, 0x0128, 6, 0x0000, 0), /* MX6Q_PAD_EIM_DA5__TPSMP_HDATA_19 */ + IMX_PIN_REG(MX6Q_PAD_EIM_DA5, 0x043C, 0x0128, 7, 0x0000, 0), /* MX6Q_PAD_EIM_DA5__SRC_BT_CFG_5 */ + IMX_PIN_REG(MX6Q_PAD_EIM_DA6, 0x0440, 0x012C, 0, 0x0000, 0), /* MX6Q_PAD_EIM_DA6__WEIM_WEIM_DA_A_6 */ + IMX_PIN_REG(MX6Q_PAD_EIM_DA6, 0x0440, 0x012C, 1, 0x0000, 0), /* MX6Q_PAD_EIM_DA6__IPU1_DISP1_DAT_3 */ + IMX_PIN_REG(MX6Q_PAD_EIM_DA6, 0x0440, 0x012C, 2, 0x0000, 0), /* MX6Q_PAD_EIM_DA6__IPU2_CSI1_D_3 */ + IMX_PIN_REG(MX6Q_PAD_EIM_DA6, 0x0440, 0x012C, 3, 0x0000, 0), /* MX6Q_PAD_EIM_DA6__MIPI_CORE_DPHY_OUT_8 */ + IMX_PIN_REG(MX6Q_PAD_EIM_DA6, 0x0440, 0x012C, 4, 0x0000, 0), /* MX6Q_PAD_EIM_DA6__ANATOP_USBPHY1_TX_DN */ + IMX_PIN_REG(MX6Q_PAD_EIM_DA6, 0x0440, 0x012C, 5, 0x0000, 0), /* MX6Q_PAD_EIM_DA6__GPIO_3_6 */ + IMX_PIN_REG(MX6Q_PAD_EIM_DA6, 0x0440, 0x012C, 6, 0x0000, 0), /* MX6Q_PAD_EIM_DA6__TPSMP_HDATA_20 */ + IMX_PIN_REG(MX6Q_PAD_EIM_DA6, 0x0440, 0x012C, 7, 0x0000, 0), /* MX6Q_PAD_EIM_DA6__SRC_BT_CFG_6 */ + IMX_PIN_REG(MX6Q_PAD_EIM_DA7, 0x0444, 0x0130, 0, 0x0000, 0), /* MX6Q_PAD_EIM_DA7__WEIM_WEIM_DA_A_7 */ + IMX_PIN_REG(MX6Q_PAD_EIM_DA7, 0x0444, 0x0130, 1, 0x0000, 0), /* MX6Q_PAD_EIM_DA7__IPU1_DISP1_DAT_2 */ + IMX_PIN_REG(MX6Q_PAD_EIM_DA7, 0x0444, 0x0130, 2, 0x0000, 0), /* MX6Q_PAD_EIM_DA7__IPU2_CSI1_D_2 */ + IMX_PIN_REG(MX6Q_PAD_EIM_DA7, 0x0444, 0x0130, 3, 0x0000, 0), /* MX6Q_PAD_EIM_DA7__MIPI_CORE_DPHY_OUT_9 */ + IMX_PIN_REG(MX6Q_PAD_EIM_DA7, 0x0444, 0x0130, 5, 0x0000, 0), /* MX6Q_PAD_EIM_DA7__GPIO_3_7 */ + IMX_PIN_REG(MX6Q_PAD_EIM_DA7, 0x0444, 0x0130, 6, 0x0000, 0), /* MX6Q_PAD_EIM_DA7__TPSMP_HDATA_21 */ + IMX_PIN_REG(MX6Q_PAD_EIM_DA7, 0x0444, 0x0130, 7, 0x0000, 0), /* MX6Q_PAD_EIM_DA7__SRC_BT_CFG_7 */ + IMX_PIN_REG(MX6Q_PAD_EIM_DA8, 0x0448, 0x0134, 0, 0x0000, 0), /* MX6Q_PAD_EIM_DA8__WEIM_WEIM_DA_A_8 */ + IMX_PIN_REG(MX6Q_PAD_EIM_DA8, 0x0448, 0x0134, 1, 0x0000, 0), /* MX6Q_PAD_EIM_DA8__IPU1_DISP1_DAT_1 */ + IMX_PIN_REG(MX6Q_PAD_EIM_DA8, 0x0448, 0x0134, 2, 0x0000, 0), /* MX6Q_PAD_EIM_DA8__IPU2_CSI1_D_1 */ + IMX_PIN_REG(MX6Q_PAD_EIM_DA8, 0x0448, 0x0134, 3, 0x0000, 0), /* MX6Q_PAD_EIM_DA8__MIPI_CORE_DPHY_OUT_10 */ + IMX_PIN_REG(MX6Q_PAD_EIM_DA8, 0x0448, 0x0134, 5, 0x0000, 0), /* MX6Q_PAD_EIM_DA8__GPIO_3_8 */ + IMX_PIN_REG(MX6Q_PAD_EIM_DA8, 0x0448, 0x0134, 6, 0x0000, 0), /* MX6Q_PAD_EIM_DA8__TPSMP_HDATA_22 */ + IMX_PIN_REG(MX6Q_PAD_EIM_DA8, 0x0448, 0x0134, 7, 0x0000, 0), /* MX6Q_PAD_EIM_DA8__SRC_BT_CFG_8 */ + IMX_PIN_REG(MX6Q_PAD_EIM_DA9, 0x044C, 0x0138, 0, 0x0000, 0), /* MX6Q_PAD_EIM_DA9__WEIM_WEIM_DA_A_9 */ + IMX_PIN_REG(MX6Q_PAD_EIM_DA9, 0x044C, 0x0138, 1, 0x0000, 0), /* MX6Q_PAD_EIM_DA9__IPU1_DISP1_DAT_0 */ + IMX_PIN_REG(MX6Q_PAD_EIM_DA9, 0x044C, 0x0138, 2, 0x0000, 0), /* MX6Q_PAD_EIM_DA9__IPU2_CSI1_D_0 */ + IMX_PIN_REG(MX6Q_PAD_EIM_DA9, 0x044C, 0x0138, 3, 0x0000, 0), /* MX6Q_PAD_EIM_DA9__MIPI_CORE_DPHY_OUT_11 */ + IMX_PIN_REG(MX6Q_PAD_EIM_DA9, 0x044C, 0x0138, 5, 0x0000, 0), /* MX6Q_PAD_EIM_DA9__GPIO_3_9 */ + IMX_PIN_REG(MX6Q_PAD_EIM_DA9, 0x044C, 0x0138, 6, 0x0000, 0), /* MX6Q_PAD_EIM_DA9__TPSMP_HDATA_23 */ + IMX_PIN_REG(MX6Q_PAD_EIM_DA9, 0x044C, 0x0138, 7, 0x0000, 0), /* MX6Q_PAD_EIM_DA9__SRC_BT_CFG_9 */ + IMX_PIN_REG(MX6Q_PAD_EIM_DA10, 0x0450, 0x013C, 0, 0x0000, 0), /* MX6Q_PAD_EIM_DA10__WEIM_WEIM_DA_A_10 */ + IMX_PIN_REG(MX6Q_PAD_EIM_DA10, 0x0450, 0x013C, 1, 0x0000, 0), /* MX6Q_PAD_EIM_DA10__IPU1_DI1_PIN15 */ + IMX_PIN_REG(MX6Q_PAD_EIM_DA10, 0x0450, 0x013C, 2, 0x08D8, 1), /* MX6Q_PAD_EIM_DA10__IPU2_CSI1_DATA_EN */ + IMX_PIN_REG(MX6Q_PAD_EIM_DA10, 0x0450, 0x013C, 3, 0x0000, 0), /* MX6Q_PAD_EIM_DA10__MIPI_CORE_DPHY_OUT12 */ + IMX_PIN_REG(MX6Q_PAD_EIM_DA10, 0x0450, 0x013C, 5, 0x0000, 0), /* MX6Q_PAD_EIM_DA10__GPIO_3_10 */ + IMX_PIN_REG(MX6Q_PAD_EIM_DA10, 0x0450, 0x013C, 6, 0x0000, 0), /* MX6Q_PAD_EIM_DA10__TPSMP_HDATA_24 */ + IMX_PIN_REG(MX6Q_PAD_EIM_DA10, 0x0450, 0x013C, 7, 0x0000, 0), /* MX6Q_PAD_EIM_DA10__SRC_BT_CFG_10 */ + IMX_PIN_REG(MX6Q_PAD_EIM_DA11, 0x0454, 0x0140, 0, 0x0000, 0), /* MX6Q_PAD_EIM_DA11__WEIM_WEIM_DA_A_11 */ + IMX_PIN_REG(MX6Q_PAD_EIM_DA11, 0x0454, 0x0140, 1, 0x0000, 0), /* MX6Q_PAD_EIM_DA11__IPU1_DI1_PIN2 */ + IMX_PIN_REG(MX6Q_PAD_EIM_DA11, 0x0454, 0x0140, 2, 0x08DC, 1), /* MX6Q_PAD_EIM_DA11__IPU2_CSI1_HSYNC */ + IMX_PIN_REG(MX6Q_PAD_EIM_DA11, 0x0454, 0x0140, 3, 0x0000, 0), /* MX6Q_PAD_EIM_DA11__MIPI_CORE_DPHY_OUT13 */ + IMX_PIN_REG(MX6Q_PAD_EIM_DA11, 0x0454, 0x0140, 4, 0x0000, 0), /* MX6Q_PAD_EIM_DA11__SDMA_DBG_EVT_CHN_6 */ + IMX_PIN_REG(MX6Q_PAD_EIM_DA11, 0x0454, 0x0140, 5, 0x0000, 0), /* MX6Q_PAD_EIM_DA11__GPIO_3_11 */ + IMX_PIN_REG(MX6Q_PAD_EIM_DA11, 0x0454, 0x0140, 6, 0x0000, 0), /* MX6Q_PAD_EIM_DA11__TPSMP_HDATA_25 */ + IMX_PIN_REG(MX6Q_PAD_EIM_DA11, 0x0454, 0x0140, 7, 0x0000, 0), /* MX6Q_PAD_EIM_DA11__SRC_BT_CFG_11 */ + IMX_PIN_REG(MX6Q_PAD_EIM_DA12, 0x0458, 0x0144, 0, 0x0000, 0), /* MX6Q_PAD_EIM_DA12__WEIM_WEIM_DA_A_12 */ + IMX_PIN_REG(MX6Q_PAD_EIM_DA12, 0x0458, 0x0144, 1, 0x0000, 0), /* MX6Q_PAD_EIM_DA12__IPU1_DI1_PIN3 */ + IMX_PIN_REG(MX6Q_PAD_EIM_DA12, 0x0458, 0x0144, 2, 0x08E4, 1), /* MX6Q_PAD_EIM_DA12__IPU2_CSI1_VSYNC */ + IMX_PIN_REG(MX6Q_PAD_EIM_DA12, 0x0458, 0x0144, 3, 0x0000, 0), /* MX6Q_PAD_EIM_DA12__MIPI_CORE_DPHY_OUT14 */ + IMX_PIN_REG(MX6Q_PAD_EIM_DA12, 0x0458, 0x0144, 4, 0x0000, 0), /* MX6Q_PAD_EIM_DA12__SDMA_DEBUG_EVT_CHN_3 */ + IMX_PIN_REG(MX6Q_PAD_EIM_DA12, 0x0458, 0x0144, 5, 0x0000, 0), /* MX6Q_PAD_EIM_DA12__GPIO_3_12 */ + IMX_PIN_REG(MX6Q_PAD_EIM_DA12, 0x0458, 0x0144, 6, 0x0000, 0), /* MX6Q_PAD_EIM_DA12__TPSMP_HDATA_26 */ + IMX_PIN_REG(MX6Q_PAD_EIM_DA12, 0x0458, 0x0144, 7, 0x0000, 0), /* MX6Q_PAD_EIM_DA12__SRC_BT_CFG_12 */ + IMX_PIN_REG(MX6Q_PAD_EIM_DA13, 0x045C, 0x0148, 0, 0x0000, 0), /* MX6Q_PAD_EIM_DA13__WEIM_WEIM_DA_A_13 */ + IMX_PIN_REG(MX6Q_PAD_EIM_DA13, 0x045C, 0x0148, 1, 0x0000, 0), /* MX6Q_PAD_EIM_DA13__IPU1_DI1_D0_CS */ + IMX_PIN_REG(MX6Q_PAD_EIM_DA13, 0x045C, 0x0148, 2, 0x07EC, 1), /* MX6Q_PAD_EIM_DA13__CCM_DI1_EXT_CLK */ + IMX_PIN_REG(MX6Q_PAD_EIM_DA13, 0x045C, 0x0148, 3, 0x0000, 0), /* MX6Q_PAD_EIM_DA13__MIPI_CORE_DPHY_OUT15 */ + IMX_PIN_REG(MX6Q_PAD_EIM_DA13, 0x045C, 0x0148, 4, 0x0000, 0), /* MX6Q_PAD_EIM_DA13__SDMA_DEBUG_EVT_CHN_4 */ + IMX_PIN_REG(MX6Q_PAD_EIM_DA13, 0x045C, 0x0148, 5, 0x0000, 0), /* MX6Q_PAD_EIM_DA13__GPIO_3_13 */ + IMX_PIN_REG(MX6Q_PAD_EIM_DA13, 0x045C, 0x0148, 6, 0x0000, 0), /* MX6Q_PAD_EIM_DA13__TPSMP_HDATA_27 */ + IMX_PIN_REG(MX6Q_PAD_EIM_DA13, 0x045C, 0x0148, 7, 0x0000, 0), /* MX6Q_PAD_EIM_DA13__SRC_BT_CFG_13 */ + IMX_PIN_REG(MX6Q_PAD_EIM_DA14, 0x0460, 0x014C, 0, 0x0000, 0), /* MX6Q_PAD_EIM_DA14__WEIM_WEIM_DA_A_14 */ + IMX_PIN_REG(MX6Q_PAD_EIM_DA14, 0x0460, 0x014C, 1, 0x0000, 0), /* MX6Q_PAD_EIM_DA14__IPU1_DI1_D1_CS */ + IMX_PIN_REG(MX6Q_PAD_EIM_DA14, 0x0460, 0x014C, 2, 0x0000, 0), /* MX6Q_PAD_EIM_DA14__CCM_DI0_EXT_CLK */ + IMX_PIN_REG(MX6Q_PAD_EIM_DA14, 0x0460, 0x014C, 3, 0x0000, 0), /* MX6Q_PAD_EIM_DA14__MIPI_CORE_DPHY_OUT16 */ + IMX_PIN_REG(MX6Q_PAD_EIM_DA14, 0x0460, 0x014C, 4, 0x0000, 0), /* MX6Q_PAD_EIM_DA14__SDMA_DEBUG_EVT_CHN_5 */ + IMX_PIN_REG(MX6Q_PAD_EIM_DA14, 0x0460, 0x014C, 5, 0x0000, 0), /* MX6Q_PAD_EIM_DA14__GPIO_3_14 */ + IMX_PIN_REG(MX6Q_PAD_EIM_DA14, 0x0460, 0x014C, 6, 0x0000, 0), /* MX6Q_PAD_EIM_DA14__TPSMP_HDATA_28 */ + IMX_PIN_REG(MX6Q_PAD_EIM_DA14, 0x0460, 0x014C, 7, 0x0000, 0), /* MX6Q_PAD_EIM_DA14__SRC_BT_CFG_14 */ + IMX_PIN_REG(MX6Q_PAD_EIM_DA15, 0x0464, 0x0150, 0, 0x0000, 0), /* MX6Q_PAD_EIM_DA15__WEIM_WEIM_DA_A_15 */ + IMX_PIN_REG(MX6Q_PAD_EIM_DA15, 0x0464, 0x0150, 1, 0x0000, 0), /* MX6Q_PAD_EIM_DA15__IPU1_DI1_PIN1 */ + IMX_PIN_REG(MX6Q_PAD_EIM_DA15, 0x0464, 0x0150, 2, 0x0000, 0), /* MX6Q_PAD_EIM_DA15__IPU1_DI1_PIN4 */ + IMX_PIN_REG(MX6Q_PAD_EIM_DA15, 0x0464, 0x0150, 3, 0x0000, 0), /* MX6Q_PAD_EIM_DA15__MIPI_CORE_DPHY_OUT17 */ + IMX_PIN_REG(MX6Q_PAD_EIM_DA15, 0x0464, 0x0150, 5, 0x0000, 0), /* MX6Q_PAD_EIM_DA15__GPIO_3_15 */ + IMX_PIN_REG(MX6Q_PAD_EIM_DA15, 0x0464, 0x0150, 6, 0x0000, 0), /* MX6Q_PAD_EIM_DA15__TPSMP_HDATA_29 */ + IMX_PIN_REG(MX6Q_PAD_EIM_DA15, 0x0464, 0x0150, 7, 0x0000, 0), /* MX6Q_PAD_EIM_DA15__SRC_BT_CFG_15 */ + IMX_PIN_REG(MX6Q_PAD_EIM_WAIT, 0x0468, 0x0154, 0, 0x0000, 0), /* MX6Q_PAD_EIM_WAIT__WEIM_WEIM_WAIT */ + IMX_PIN_REG(MX6Q_PAD_EIM_WAIT, 0x0468, 0x0154, 1, 0x0000, 0), /* MX6Q_PAD_EIM_WAIT__WEIM_WEIM_DTACK_B */ + IMX_PIN_REG(MX6Q_PAD_EIM_WAIT, 0x0468, 0x0154, 5, 0x0000, 0), /* MX6Q_PAD_EIM_WAIT__GPIO_5_0 */ + IMX_PIN_REG(MX6Q_PAD_EIM_WAIT, 0x0468, 0x0154, 6, 0x0000, 0), /* MX6Q_PAD_EIM_WAIT__TPSMP_HDATA_30 */ + IMX_PIN_REG(MX6Q_PAD_EIM_WAIT, 0x0468, 0x0154, 7, 0x0000, 0), /* MX6Q_PAD_EIM_WAIT__SRC_BT_CFG_25 */ + IMX_PIN_REG(MX6Q_PAD_EIM_BCLK, 0x046C, 0x0158, 0, 0x0000, 0), /* MX6Q_PAD_EIM_BCLK__WEIM_WEIM_BCLK */ + IMX_PIN_REG(MX6Q_PAD_EIM_BCLK, 0x046C, 0x0158, 1, 0x0000, 0), /* MX6Q_PAD_EIM_BCLK__IPU1_DI1_PIN16 */ + IMX_PIN_REG(MX6Q_PAD_EIM_BCLK, 0x046C, 0x0158, 5, 0x0000, 0), /* MX6Q_PAD_EIM_BCLK__GPIO_6_31 */ + IMX_PIN_REG(MX6Q_PAD_EIM_BCLK, 0x046C, 0x0158, 6, 0x0000, 0), /* MX6Q_PAD_EIM_BCLK__TPSMP_HDATA_31 */ + IMX_PIN_REG(MX6Q_PAD_DI0_DISP_CLK, 0x0470, 0x015C, 0, 0x0000, 0), /* MX6Q_PAD_DI0_DISP_CLK__IPU1_DI0_DSP_CLK */ + IMX_PIN_REG(MX6Q_PAD_DI0_DISP_CLK, 0x0470, 0x015C, 1, 0x0000, 0), /* MX6Q_PAD_DI0_DISP_CLK__IPU2_DI0_DSP_CLK */ + IMX_PIN_REG(MX6Q_PAD_DI0_DISP_CLK, 0x0470, 0x015C, 3, 0x0000, 0), /* MX6Q_PAD_DI0_DISP_CLK__MIPI_CR_DPY_OT28 */ + IMX_PIN_REG(MX6Q_PAD_DI0_DISP_CLK, 0x0470, 0x015C, 4, 0x0000, 0), /* MX6Q_PAD_DI0_DISP_CLK__SDMA_DBG_CR_STA0 */ + IMX_PIN_REG(MX6Q_PAD_DI0_DISP_CLK, 0x0470, 0x015C, 5, 0x0000, 0), /* MX6Q_PAD_DI0_DISP_CLK__GPIO_4_16 */ + IMX_PIN_REG(MX6Q_PAD_DI0_DISP_CLK, 0x0470, 0x015C, 6, 0x0000, 0), /* MX6Q_PAD_DI0_DISP_CLK__MMDC_DEBUG_0 */ + IMX_PIN_REG(MX6Q_PAD_DI0_PIN15, 0x0474, 0x0160, 0, 0x0000, 0), /* MX6Q_PAD_DI0_PIN15__IPU1_DI0_PIN15 */ + IMX_PIN_REG(MX6Q_PAD_DI0_PIN15, 0x0474, 0x0160, 1, 0x0000, 0), /* MX6Q_PAD_DI0_PIN15__IPU2_DI0_PIN15 */ + IMX_PIN_REG(MX6Q_PAD_DI0_PIN15, 0x0474, 0x0160, 2, 0x0000, 0), /* MX6Q_PAD_DI0_PIN15__AUDMUX_AUD6_TXC */ + IMX_PIN_REG(MX6Q_PAD_DI0_PIN15, 0x0474, 0x0160, 3, 0x0000, 0), /* MX6Q_PAD_DI0_PIN15__MIPI_CR_DPHY_OUT_29 */ + IMX_PIN_REG(MX6Q_PAD_DI0_PIN15, 0x0474, 0x0160, 4, 0x0000, 0), /* MX6Q_PAD_DI0_PIN15__SDMA_DBG_CORE_STA_1 */ + IMX_PIN_REG(MX6Q_PAD_DI0_PIN15, 0x0474, 0x0160, 5, 0x0000, 0), /* MX6Q_PAD_DI0_PIN15__GPIO_4_17 */ + IMX_PIN_REG(MX6Q_PAD_DI0_PIN15, 0x0474, 0x0160, 6, 0x0000, 0), /* MX6Q_PAD_DI0_PIN15__MMDC_MMDC_DEBUG_1 */ + IMX_PIN_REG(MX6Q_PAD_DI0_PIN2, 0x0478, 0x0164, 0, 0x0000, 0), /* MX6Q_PAD_DI0_PIN2__IPU1_DI0_PIN2 */ + IMX_PIN_REG(MX6Q_PAD_DI0_PIN2, 0x0478, 0x0164, 1, 0x0000, 0), /* MX6Q_PAD_DI0_PIN2__IPU2_DI0_PIN2 */ + IMX_PIN_REG(MX6Q_PAD_DI0_PIN2, 0x0478, 0x0164, 2, 0x0000, 0), /* MX6Q_PAD_DI0_PIN2__AUDMUX_AUD6_TXD */ + IMX_PIN_REG(MX6Q_PAD_DI0_PIN2, 0x0478, 0x0164, 3, 0x0000, 0), /* MX6Q_PAD_DI0_PIN2__MIPI_CR_DPHY_OUT_30 */ + IMX_PIN_REG(MX6Q_PAD_DI0_PIN2, 0x0478, 0x0164, 4, 0x0000, 0), /* MX6Q_PAD_DI0_PIN2__SDMA_DBG_CORE_STA_2 */ + IMX_PIN_REG(MX6Q_PAD_DI0_PIN2, 0x0478, 0x0164, 5, 0x0000, 0), /* MX6Q_PAD_DI0_PIN2__GPIO_4_18 */ + IMX_PIN_REG(MX6Q_PAD_DI0_PIN2, 0x0478, 0x0164, 6, 0x0000, 0), /* MX6Q_PAD_DI0_PIN2__MMDC_DEBUG_2 */ + IMX_PIN_REG(MX6Q_PAD_DI0_PIN2, 0x0478, 0x0164, 7, 0x0000, 0), /* MX6Q_PAD_DI0_PIN2__PL301_PER1_HADDR_9 */ + IMX_PIN_REG(MX6Q_PAD_DI0_PIN3, 0x047C, 0x0168, 0, 0x0000, 0), /* MX6Q_PAD_DI0_PIN3__IPU1_DI0_PIN3 */ + IMX_PIN_REG(MX6Q_PAD_DI0_PIN3, 0x047C, 0x0168, 1, 0x0000, 0), /* MX6Q_PAD_DI0_PIN3__IPU2_DI0_PIN3 */ + IMX_PIN_REG(MX6Q_PAD_DI0_PIN3, 0x047C, 0x0168, 2, 0x0000, 0), /* MX6Q_PAD_DI0_PIN3__AUDMUX_AUD6_TXFS */ + IMX_PIN_REG(MX6Q_PAD_DI0_PIN3, 0x047C, 0x0168, 3, 0x0000, 0), /* MX6Q_PAD_DI0_PIN3__MIPI_CORE_DPHY_OUT31 */ + IMX_PIN_REG(MX6Q_PAD_DI0_PIN3, 0x047C, 0x0168, 4, 0x0000, 0), /* MX6Q_PAD_DI0_PIN3__SDMA_DBG_CORE_STA_3 */ + IMX_PIN_REG(MX6Q_PAD_DI0_PIN3, 0x047C, 0x0168, 5, 0x0000, 0), /* MX6Q_PAD_DI0_PIN3__GPIO_4_19 */ + IMX_PIN_REG(MX6Q_PAD_DI0_PIN3, 0x047C, 0x0168, 6, 0x0000, 0), /* MX6Q_PAD_DI0_PIN3__MMDC_MMDC_DEBUG_3 */ + IMX_PIN_REG(MX6Q_PAD_DI0_PIN3, 0x047C, 0x0168, 7, 0x0000, 0), /* MX6Q_PAD_DI0_PIN3__PL301_PER1_HADDR_10 */ + IMX_PIN_REG(MX6Q_PAD_DI0_PIN4, 0x0480, 0x016C, 0, 0x0000, 0), /* MX6Q_PAD_DI0_PIN4__IPU1_DI0_PIN4 */ + IMX_PIN_REG(MX6Q_PAD_DI0_PIN4, 0x0480, 0x016C, 1, 0x0000, 0), /* MX6Q_PAD_DI0_PIN4__IPU2_DI0_PIN4 */ + IMX_PIN_REG(MX6Q_PAD_DI0_PIN4, 0x0480, 0x016C, 2, 0x0000, 0), /* MX6Q_PAD_DI0_PIN4__AUDMUX_AUD6_RXD */ + IMX_PIN_REG(MX6Q_PAD_DI0_PIN4, 0x0480, 0x016C, 3, 0x094C, 0), /* MX6Q_PAD_DI0_PIN4__USDHC1_WP */ + IMX_PIN_REG(MX6Q_PAD_DI0_PIN4, 0x0480, 0x016C, 4, 0x0000, 0), /* MX6Q_PAD_DI0_PIN4__SDMA_DEBUG_YIELD */ + IMX_PIN_REG(MX6Q_PAD_DI0_PIN4, 0x0480, 0x016C, 5, 0x0000, 0), /* MX6Q_PAD_DI0_PIN4__GPIO_4_20 */ + IMX_PIN_REG(MX6Q_PAD_DI0_PIN4, 0x0480, 0x016C, 6, 0x0000, 0), /* MX6Q_PAD_DI0_PIN4__MMDC_MMDC_DEBUG_4 */ + IMX_PIN_REG(MX6Q_PAD_DI0_PIN4, 0x0480, 0x016C, 7, 0x0000, 0), /* MX6Q_PAD_DI0_PIN4__PL301_PER1_HADDR_11 */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT0, 0x0484, 0x0170, 0, 0x0000, 0), /* MX6Q_PAD_DISP0_DAT0__IPU1_DISP0_DAT_0 */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT0, 0x0484, 0x0170, 1, 0x0000, 0), /* MX6Q_PAD_DISP0_DAT0__IPU2_DISP0_DAT_0 */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT0, 0x0484, 0x0170, 2, 0x0000, 0), /* MX6Q_PAD_DISP0_DAT0__ECSPI3_SCLK */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT0, 0x0484, 0x0170, 3, 0x0000, 0), /* MX6Q_PAD_DISP0_DAT0__USDHC1_USDHC_DBG_0 */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT0, 0x0484, 0x0170, 4, 0x0000, 0), /* MX6Q_PAD_DISP0_DAT0__SDMA_DBG_CORE_RUN */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT0, 0x0484, 0x0170, 5, 0x0000, 0), /* MX6Q_PAD_DISP0_DAT0__GPIO_4_21 */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT0, 0x0484, 0x0170, 6, 0x0000, 0), /* MX6Q_PAD_DISP0_DAT0__MMDC_MMDC_DEBUG_5 */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT1, 0x0488, 0x0174, 0, 0x0000, 0), /* MX6Q_PAD_DISP0_DAT1__IPU1_DISP0_DAT_1 */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT1, 0x0488, 0x0174, 1, 0x0000, 0), /* MX6Q_PAD_DISP0_DAT1__IPU2_DISP0_DAT_1 */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT1, 0x0488, 0x0174, 2, 0x0000, 0), /* MX6Q_PAD_DISP0_DAT1__ECSPI3_MOSI */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT1, 0x0488, 0x0174, 3, 0x0000, 0), /* MX6Q_PAD_DISP0_DAT1__USDHC1_USDHC_DBG_1 */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT1, 0x0488, 0x0174, 4, 0x0000, 0), /* MX6Q_PAD_DISP0_DAT1__SDMA_DBG_EVT_CHNSL */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT1, 0x0488, 0x0174, 5, 0x0000, 0), /* MX6Q_PAD_DISP0_DAT1__GPIO_4_22 */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT1, 0x0488, 0x0174, 6, 0x0000, 0), /* MX6Q_PAD_DISP0_DAT1__MMDC_DEBUG_6 */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT1, 0x0488, 0x0174, 7, 0x0000, 0), /* MX6Q_PAD_DISP0_DAT1__PL301_PER1_HADR_12 */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT2, 0x048C, 0x0178, 0, 0x0000, 0), /* MX6Q_PAD_DISP0_DAT2__IPU1_DISP0_DAT_2 */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT2, 0x048C, 0x0178, 1, 0x0000, 0), /* MX6Q_PAD_DISP0_DAT2__IPU2_DISP0_DAT_2 */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT2, 0x048C, 0x0178, 2, 0x0000, 0), /* MX6Q_PAD_DISP0_DAT2__ECSPI3_MISO */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT2, 0x048C, 0x0178, 3, 0x0000, 0), /* MX6Q_PAD_DISP0_DAT2__USDHC1_USDHC_DBG_2 */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT2, 0x048C, 0x0178, 4, 0x0000, 0), /* MX6Q_PAD_DISP0_DAT2__SDMA_DEBUG_MODE */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT2, 0x048C, 0x0178, 5, 0x0000, 0), /* MX6Q_PAD_DISP0_DAT2__GPIO_4_23 */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT2, 0x048C, 0x0178, 6, 0x0000, 0), /* MX6Q_PAD_DISP0_DAT2__MMDC_DEBUG_7 */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT2, 0x048C, 0x0178, 7, 0x0000, 0), /* MX6Q_PAD_DISP0_DAT2__PL301_PER1_HADR_13 */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT3, 0x0490, 0x017C, 0, 0x0000, 0), /* MX6Q_PAD_DISP0_DAT3__IPU1_DISP0_DAT_3 */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT3, 0x0490, 0x017C, 1, 0x0000, 0), /* MX6Q_PAD_DISP0_DAT3__IPU2_DISP0_DAT_3 */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT3, 0x0490, 0x017C, 2, 0x0000, 0), /* MX6Q_PAD_DISP0_DAT3__ECSPI3_SS0 */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT3, 0x0490, 0x017C, 3, 0x0000, 0), /* MX6Q_PAD_DISP0_DAT3__USDHC1_USDHC_DBG_3 */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT3, 0x0490, 0x017C, 4, 0x0000, 0), /* MX6Q_PAD_DISP0_DAT3__SDMA_DBG_BUS_ERROR */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT3, 0x0490, 0x017C, 5, 0x0000, 0), /* MX6Q_PAD_DISP0_DAT3__GPIO_4_24 */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT3, 0x0490, 0x017C, 6, 0x0000, 0), /* MX6Q_PAD_DISP0_DAT3__MMDC_MMDC_DBG_8 */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT3, 0x0490, 0x017C, 7, 0x0000, 0), /* MX6Q_PAD_DISP0_DAT3__PL301_PER1_HADR_14 */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT4, 0x0494, 0x0180, 0, 0x0000, 0), /* MX6Q_PAD_DISP0_DAT4__IPU1_DISP0_DAT_4 */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT4, 0x0494, 0x0180, 1, 0x0000, 0), /* MX6Q_PAD_DISP0_DAT4__IPU2_DISP0_DAT_4 */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT4, 0x0494, 0x0180, 2, 0x0000, 0), /* MX6Q_PAD_DISP0_DAT4__ECSPI3_SS1 */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT4, 0x0494, 0x0180, 3, 0x0000, 0), /* MX6Q_PAD_DISP0_DAT4__USDHC1_USDHC_DBG_4 */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT4, 0x0494, 0x0180, 4, 0x0000, 0), /* MX6Q_PAD_DISP0_DAT4__SDMA_DEBUG_BUS_RWB */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT4, 0x0494, 0x0180, 5, 0x0000, 0), /* MX6Q_PAD_DISP0_DAT4__GPIO_4_25 */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT4, 0x0494, 0x0180, 6, 0x0000, 0), /* MX6Q_PAD_DISP0_DAT4__MMDC_MMDC_DEBUG_9 */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT4, 0x0494, 0x0180, 7, 0x0000, 0), /* MX6Q_PAD_DISP0_DAT4__PL301_PER1_HADR_15 */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT5, 0x0498, 0x0184, 0, 0x0000, 0), /* MX6Q_PAD_DISP0_DAT5__IPU1_DISP0_DAT_5 */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT5, 0x0498, 0x0184, 1, 0x0000, 0), /* MX6Q_PAD_DISP0_DAT5__IPU2_DISP0_DAT_5 */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT5, 0x0498, 0x0184, 2, 0x0000, 0), /* MX6Q_PAD_DISP0_DAT5__ECSPI3_SS2 */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT5, 0x0498, 0x0184, 3, 0x0000, 0), /* MX6Q_PAD_DISP0_DAT5__AUDMUX_AUD6_RXFS */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT5, 0x0498, 0x0184, 4, 0x0000, 0), /* MX6Q_PAD_DISP0_DAT5__SDMA_DBG_MCH_DMBUS */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT5, 0x0498, 0x0184, 5, 0x0000, 0), /* MX6Q_PAD_DISP0_DAT5__GPIO_4_26 */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT5, 0x0498, 0x0184, 6, 0x0000, 0), /* MX6Q_PAD_DISP0_DAT5__MMDC_DEBUG_10 */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT5, 0x0498, 0x0184, 7, 0x0000, 0), /* MX6Q_PAD_DISP0_DAT5__PL301_PER1_HADR_16 */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT6, 0x049C, 0x0188, 0, 0x0000, 0), /* MX6Q_PAD_DISP0_DAT6__IPU1_DISP0_DAT_6 */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT6, 0x049C, 0x0188, 1, 0x0000, 0), /* MX6Q_PAD_DISP0_DAT6__IPU2_DISP0_DAT_6 */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT6, 0x049C, 0x0188, 2, 0x0000, 0), /* MX6Q_PAD_DISP0_DAT6__ECSPI3_SS3 */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT6, 0x049C, 0x0188, 3, 0x0000, 0), /* MX6Q_PAD_DISP0_DAT6__AUDMUX_AUD6_RXC */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT6, 0x049C, 0x0188, 4, 0x0000, 0), /* MX6Q_PAD_DISP0_DAT6__SDMA_DBG_RTBUF_WRT */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT6, 0x049C, 0x0188, 5, 0x0000, 0), /* MX6Q_PAD_DISP0_DAT6__GPIO_4_27 */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT6, 0x049C, 0x0188, 6, 0x0000, 0), /* MX6Q_PAD_DISP0_DAT6__MMDC_DEBUG_11 */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT6, 0x049C, 0x0188, 7, 0x0000, 0), /* MX6Q_PAD_DISP0_DAT6__PL301_PER1_HADR_17 */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT7, 0x04A0, 0x018C, 0, 0x0000, 0), /* MX6Q_PAD_DISP0_DAT7__IPU1_DISP0_DAT_7 */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT7, 0x04A0, 0x018C, 1, 0x0000, 0), /* MX6Q_PAD_DISP0_DAT7__IPU2_DISP0_DAT_7 */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT7, 0x04A0, 0x018C, 2, 0x0000, 0), /* MX6Q_PAD_DISP0_DAT7__ECSPI3_RDY */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT7, 0x04A0, 0x018C, 3, 0x0000, 0), /* MX6Q_PAD_DISP0_DAT7__USDHC1_USDHC_DBG_5 */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT7, 0x04A0, 0x018C, 4, 0x0000, 0), /* MX6Q_PAD_DISP0_DAT7__SDMA_DBG_EVT_CHN_0 */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT7, 0x04A0, 0x018C, 5, 0x0000, 0), /* MX6Q_PAD_DISP0_DAT7__GPIO_4_28 */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT7, 0x04A0, 0x018C, 6, 0x0000, 0), /* MX6Q_PAD_DISP0_DAT7__MMDC_DEBUG_12 */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT7, 0x04A0, 0x018C, 7, 0x0000, 0), /* MX6Q_PAD_DISP0_DAT7__PL301_PER1_HADR_18 */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT8, 0x04A4, 0x0190, 0, 0x0000, 0), /* MX6Q_PAD_DISP0_DAT8__IPU1_DISP0_DAT_8 */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT8, 0x04A4, 0x0190, 1, 0x0000, 0), /* MX6Q_PAD_DISP0_DAT8__IPU2_DISP0_DAT_8 */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT8, 0x04A4, 0x0190, 2, 0x0000, 0), /* MX6Q_PAD_DISP0_DAT8__PWM1_PWMO */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT8, 0x04A4, 0x0190, 3, 0x0000, 0), /* MX6Q_PAD_DISP0_DAT8__WDOG1_WDOG_B */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT8, 0x04A4, 0x0190, 4, 0x0000, 0), /* MX6Q_PAD_DISP0_DAT8__SDMA_DBG_EVT_CHN_1 */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT8, 0x04A4, 0x0190, 5, 0x0000, 0), /* MX6Q_PAD_DISP0_DAT8__GPIO_4_29 */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT8, 0x04A4, 0x0190, 6, 0x0000, 0), /* MX6Q_PAD_DISP0_DAT8__MMDC_DEBUG_13 */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT8, 0x04A4, 0x0190, 7, 0x0000, 0), /* MX6Q_PAD_DISP0_DAT8__PL301_PER1_HADR_19 */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT9, 0x04A8, 0x0194, 0, 0x0000, 0), /* MX6Q_PAD_DISP0_DAT9__IPU1_DISP0_DAT_9 */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT9, 0x04A8, 0x0194, 1, 0x0000, 0), /* MX6Q_PAD_DISP0_DAT9__IPU2_DISP0_DAT_9 */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT9, 0x04A8, 0x0194, 2, 0x0000, 0), /* MX6Q_PAD_DISP0_DAT9__PWM2_PWMO */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT9, 0x04A8, 0x0194, 3, 0x0000, 0), /* MX6Q_PAD_DISP0_DAT9__WDOG2_WDOG_B */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT9, 0x04A8, 0x0194, 4, 0x0000, 0), /* MX6Q_PAD_DISP0_DAT9__SDMA_DBG_EVT_CHN_2 */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT9, 0x04A8, 0x0194, 5, 0x0000, 0), /* MX6Q_PAD_DISP0_DAT9__GPIO_4_30 */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT9, 0x04A8, 0x0194, 6, 0x0000, 0), /* MX6Q_PAD_DISP0_DAT9__MMDC_DEBUG_14 */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT9, 0x04A8, 0x0194, 7, 0x0000, 0), /* MX6Q_PAD_DISP0_DAT9__PL301_PER1_HADR_20 */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT10, 0x04AC, 0x0198, 0, 0x0000, 0), /* MX6Q_PAD_DISP0_DAT10__IPU1_DISP0_DAT_10 */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT10, 0x04AC, 0x0198, 1, 0x0000, 0), /* MX6Q_PAD_DISP0_DAT10__IPU2_DISP0_DAT_10 */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT10, 0x04AC, 0x0198, 3, 0x0000, 0), /* MX6Q_PAD_DISP0_DAT10__USDHC1_DBG_6 */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT10, 0x04AC, 0x0198, 4, 0x0000, 0), /* MX6Q_PAD_DISP0_DAT10__SDMA_DBG_EVT_CHN3 */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT10, 0x04AC, 0x0198, 5, 0x0000, 0), /* MX6Q_PAD_DISP0_DAT10__GPIO_4_31 */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT10, 0x04AC, 0x0198, 6, 0x0000, 0), /* MX6Q_PAD_DISP0_DAT10__MMDC_DEBUG_15 */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT10, 0x04AC, 0x0198, 7, 0x0000, 0), /* MX6Q_PAD_DISP0_DAT10__PL301_PER1_HADR21 */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT11, 0x04B0, 0x019C, 0, 0x0000, 0), /* MX6Q_PAD_DISP0_DAT11__IPU1_DISP0_DAT_11 */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT11, 0x04B0, 0x019C, 1, 0x0000, 0), /* MX6Q_PAD_DISP0_DAT11__IPU2_DISP0_DAT_11 */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT11, 0x04B0, 0x019C, 3, 0x0000, 0), /* MX6Q_PAD_DISP0_DAT11__USDHC1_USDHC_DBG7 */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT11, 0x04B0, 0x019C, 4, 0x0000, 0), /* MX6Q_PAD_DISP0_DAT11__SDMA_DBG_EVT_CHN4 */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT11, 0x04B0, 0x019C, 5, 0x0000, 0), /* MX6Q_PAD_DISP0_DAT11__GPIO_5_5 */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT11, 0x04B0, 0x019C, 6, 0x0000, 0), /* MX6Q_PAD_DISP0_DAT11__MMDC_DEBUG_16 */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT11, 0x04B0, 0x019C, 7, 0x0000, 0), /* MX6Q_PAD_DISP0_DAT11__PL301_PER1_HADR22 */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT12, 0x04B4, 0x01A0, 0, 0x0000, 0), /* MX6Q_PAD_DISP0_DAT12__IPU1_DISP0_DAT_12 */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT12, 0x04B4, 0x01A0, 1, 0x0000, 0), /* MX6Q_PAD_DISP0_DAT12__IPU2_DISP0_DAT_12 */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT12, 0x04B4, 0x01A0, 3, 0x0000, 0), /* MX6Q_PAD_DISP0_DAT12__RESERVED_RESERVED */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT12, 0x04B4, 0x01A0, 4, 0x0000, 0), /* MX6Q_PAD_DISP0_DAT12__SDMA_DBG_EVT_CHN5 */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT12, 0x04B4, 0x01A0, 5, 0x0000, 0), /* MX6Q_PAD_DISP0_DAT12__GPIO_5_6 */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT12, 0x04B4, 0x01A0, 6, 0x0000, 0), /* MX6Q_PAD_DISP0_DAT12__MMDC_DEBUG_17 */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT12, 0x04B4, 0x01A0, 7, 0x0000, 0), /* MX6Q_PAD_DISP0_DAT12__PL301_PER1_HADR23 */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT13, 0x04B8, 0x01A4, 0, 0x0000, 0), /* MX6Q_PAD_DISP0_DAT13__IPU1_DISP0_DAT_13 */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT13, 0x04B8, 0x01A4, 1, 0x0000, 0), /* MX6Q_PAD_DISP0_DAT13__IPU2_DISP0_DAT_13 */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT13, 0x04B8, 0x01A4, 3, 0x07D8, 1), /* MX6Q_PAD_DISP0_DAT13__AUDMUX_AUD5_RXFS */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT13, 0x04B8, 0x01A4, 4, 0x0000, 0), /* MX6Q_PAD_DISP0_DAT13__SDMA_DBG_EVT_CHN0 */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT13, 0x04B8, 0x01A4, 5, 0x0000, 0), /* MX6Q_PAD_DISP0_DAT13__GPIO_5_7 */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT13, 0x04B8, 0x01A4, 6, 0x0000, 0), /* MX6Q_PAD_DISP0_DAT13__MMDC_DEBUG_18 */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT13, 0x04B8, 0x01A4, 7, 0x0000, 0), /* MX6Q_PAD_DISP0_DAT13__PL301_PER1_HADR24 */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT14, 0x04BC, 0x01A8, 0, 0x0000, 0), /* MX6Q_PAD_DISP0_DAT14__IPU1_DISP0_DAT_14 */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT14, 0x04BC, 0x01A8, 1, 0x0000, 0), /* MX6Q_PAD_DISP0_DAT14__IPU2_DISP0_DAT_14 */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT14, 0x04BC, 0x01A8, 3, 0x07D4, 1), /* MX6Q_PAD_DISP0_DAT14__AUDMUX_AUD5_RXC */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT14, 0x04BC, 0x01A8, 4, 0x0000, 0), /* MX6Q_PAD_DISP0_DAT14__SDMA_DBG_EVT_CHN1 */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT14, 0x04BC, 0x01A8, 5, 0x0000, 0), /* MX6Q_PAD_DISP0_DAT14__GPIO_5_8 */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT14, 0x04BC, 0x01A8, 6, 0x0000, 0), /* MX6Q_PAD_DISP0_DAT14__MMDC_DEBUG_19 */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT15, 0x04C0, 0x01AC, 0, 0x0000, 0), /* MX6Q_PAD_DISP0_DAT15__IPU1_DISP0_DAT_15 */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT15, 0x04C0, 0x01AC, 1, 0x0000, 0), /* MX6Q_PAD_DISP0_DAT15__IPU2_DISP0_DAT_15 */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT15, 0x04C0, 0x01AC, 2, 0x0804, 1), /* MX6Q_PAD_DISP0_DAT15__ECSPI1_SS1 */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT15, 0x04C0, 0x01AC, 3, 0x0820, 1), /* MX6Q_PAD_DISP0_DAT15__ECSPI2_SS1 */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT15, 0x04C0, 0x01AC, 4, 0x0000, 0), /* MX6Q_PAD_DISP0_DAT15__SDMA_DBG_EVT_CHN2 */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT15, 0x04C0, 0x01AC, 5, 0x0000, 0), /* MX6Q_PAD_DISP0_DAT15__GPIO_5_9 */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT15, 0x04C0, 0x01AC, 6, 0x0000, 0), /* MX6Q_PAD_DISP0_DAT15__MMDC_DEBUG_20 */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT15, 0x04C0, 0x01AC, 7, 0x0000, 0), /* MX6Q_PAD_DISP0_DAT15__PL301_PER1_HADR25 */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT16, 0x04C4, 0x01B0, 0, 0x0000, 0), /* MX6Q_PAD_DISP0_DAT16__IPU1_DISP0_DAT_16 */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT16, 0x04C4, 0x01B0, 1, 0x0000, 0), /* MX6Q_PAD_DISP0_DAT16__IPU2_DISP0_DAT_16 */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT16, 0x04C4, 0x01B0, 2, 0x0818, 1), /* MX6Q_PAD_DISP0_DAT16__ECSPI2_MOSI */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT16, 0x04C4, 0x01B0, 3, 0x07DC, 0), /* MX6Q_PAD_DISP0_DAT16__AUDMUX_AUD5_TXC */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT16, 0x04C4, 0x01B0, 4, 0x090C, 0), /* MX6Q_PAD_DISP0_DAT16__SDMA_EXT_EVENT_0 */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT16, 0x04C4, 0x01B0, 5, 0x0000, 0), /* MX6Q_PAD_DISP0_DAT16__GPIO_5_10 */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT16, 0x04C4, 0x01B0, 6, 0x0000, 0), /* MX6Q_PAD_DISP0_DAT16__MMDC_DEBUG_21 */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT16, 0x04C4, 0x01B0, 7, 0x0000, 0), /* MX6Q_PAD_DISP0_DAT16__PL301_PER1_HADR26 */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT17, 0x04C8, 0x01B4, 0, 0x0000, 0), /* MX6Q_PAD_DISP0_DAT17__IPU1_DISP0_DAT_17 */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT17, 0x04C8, 0x01B4, 1, 0x0000, 0), /* MX6Q_PAD_DISP0_DAT17__IPU2_DISP0_DAT_17 */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT17, 0x04C8, 0x01B4, 2, 0x0814, 1), /* MX6Q_PAD_DISP0_DAT17__ECSPI2_MISO */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT17, 0x04C8, 0x01B4, 3, 0x07D0, 0), /* MX6Q_PAD_DISP0_DAT17__AUDMUX_AUD5_TXD */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT17, 0x04C8, 0x01B4, 4, 0x0910, 0), /* MX6Q_PAD_DISP0_DAT17__SDMA_EXT_EVENT_1 */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT17, 0x04C8, 0x01B4, 5, 0x0000, 0), /* MX6Q_PAD_DISP0_DAT17__GPIO_5_11 */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT17, 0x04C8, 0x01B4, 6, 0x0000, 0), /* MX6Q_PAD_DISP0_DAT17__MMDC_DEBUG_22 */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT17, 0x04C8, 0x01B4, 7, 0x0000, 0), /* MX6Q_PAD_DISP0_DAT17__PL301_PER1_HADR27 */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT18, 0x04CC, 0x01B8, 0, 0x0000, 0), /* MX6Q_PAD_DISP0_DAT18__IPU1_DISP0_DAT_18 */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT18, 0x04CC, 0x01B8, 1, 0x0000, 0), /* MX6Q_PAD_DISP0_DAT18__IPU2_DISP0_DAT_18 */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT18, 0x04CC, 0x01B8, 2, 0x081C, 1), /* MX6Q_PAD_DISP0_DAT18__ECSPI2_SS0 */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT18, 0x04CC, 0x01B8, 3, 0x07E0, 0), /* MX6Q_PAD_DISP0_DAT18__AUDMUX_AUD5_TXFS */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT18, 0x04CC, 0x01B8, 4, 0x07C0, 0), /* MX6Q_PAD_DISP0_DAT18__AUDMUX_AUD4_RXFS */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT18, 0x04CC, 0x01B8, 5, 0x0000, 0), /* MX6Q_PAD_DISP0_DAT18__GPIO_5_12 */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT18, 0x04CC, 0x01B8, 6, 0x0000, 0), /* MX6Q_PAD_DISP0_DAT18__MMDC_DEBUG_23 */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT18, 0x04CC, 0x01B8, 7, 0x0000, 0), /* MX6Q_PAD_DISP0_DAT18__WEIM_WEIM_CS_2 */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT19, 0x04D0, 0x01BC, 0, 0x0000, 0), /* MX6Q_PAD_DISP0_DAT19__IPU1_DISP0_DAT_19 */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT19, 0x04D0, 0x01BC, 1, 0x0000, 0), /* MX6Q_PAD_DISP0_DAT19__IPU2_DISP0_DAT_19 */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT19, 0x04D0, 0x01BC, 2, 0x0810, 1), /* MX6Q_PAD_DISP0_DAT19__ECSPI2_SCLK */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT19, 0x04D0, 0x01BC, 3, 0x07CC, 0), /* MX6Q_PAD_DISP0_DAT19__AUDMUX_AUD5_RXD */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT19, 0x04D0, 0x01BC, 4, 0x07BC, 0), /* MX6Q_PAD_DISP0_DAT19__AUDMUX_AUD4_RXC */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT19, 0x04D0, 0x01BC, 5, 0x0000, 0), /* MX6Q_PAD_DISP0_DAT19__GPIO_5_13 */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT19, 0x04D0, 0x01BC, 6, 0x0000, 0), /* MX6Q_PAD_DISP0_DAT19__MMDC_DEBUG_24 */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT19, 0x04D0, 0x01BC, 7, 0x0000, 0), /* MX6Q_PAD_DISP0_DAT19__WEIM_WEIM_CS_3 */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT20, 0x04D4, 0x01C0, 0, 0x0000, 0), /* MX6Q_PAD_DISP0_DAT20__IPU1_DISP0_DAT_20 */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT20, 0x04D4, 0x01C0, 1, 0x0000, 0), /* MX6Q_PAD_DISP0_DAT20__IPU2_DISP0_DAT_20 */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT20, 0x04D4, 0x01C0, 2, 0x07F4, 1), /* MX6Q_PAD_DISP0_DAT20__ECSPI1_SCLK */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT20, 0x04D4, 0x01C0, 3, 0x07C4, 0), /* MX6Q_PAD_DISP0_DAT20__AUDMUX_AUD4_TXC */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT20, 0x04D4, 0x01C0, 4, 0x0000, 0), /* MX6Q_PAD_DISP0_DAT20__SDMA_DBG_EVT_CHN7 */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT20, 0x04D4, 0x01C0, 5, 0x0000, 0), /* MX6Q_PAD_DISP0_DAT20__GPIO_5_14 */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT20, 0x04D4, 0x01C0, 6, 0x0000, 0), /* MX6Q_PAD_DISP0_DAT20__MMDC_DEBUG_25 */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT20, 0x04D4, 0x01C0, 7, 0x0000, 0), /* MX6Q_PAD_DISP0_DAT20__PL301_PER1_HADR28 */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT21, 0x04D8, 0x01C4, 0, 0x0000, 0), /* MX6Q_PAD_DISP0_DAT21__IPU1_DISP0_DAT_21 */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT21, 0x04D8, 0x01C4, 1, 0x0000, 0), /* MX6Q_PAD_DISP0_DAT21__IPU2_DISP0_DAT_21 */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT21, 0x04D8, 0x01C4, 2, 0x07FC, 1), /* MX6Q_PAD_DISP0_DAT21__ECSPI1_MOSI */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT21, 0x04D8, 0x01C4, 3, 0x07B8, 1), /* MX6Q_PAD_DISP0_DAT21__AUDMUX_AUD4_TXD */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT21, 0x04D8, 0x01C4, 4, 0x0000, 0), /* MX6Q_PAD_DISP0_DAT21__SDMA_DBG_BUS_DEV0 */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT21, 0x04D8, 0x01C4, 5, 0x0000, 0), /* MX6Q_PAD_DISP0_DAT21__GPIO_5_15 */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT21, 0x04D8, 0x01C4, 6, 0x0000, 0), /* MX6Q_PAD_DISP0_DAT21__MMDC_DEBUG_26 */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT21, 0x04D8, 0x01C4, 7, 0x0000, 0), /* MX6Q_PAD_DISP0_DAT21__PL301_PER1_HADR29 */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT22, 0x04DC, 0x01C8, 0, 0x0000, 0), /* MX6Q_PAD_DISP0_DAT22__IPU1_DISP0_DAT_22 */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT22, 0x04DC, 0x01C8, 1, 0x0000, 0), /* MX6Q_PAD_DISP0_DAT22__IPU2_DISP0_DAT_22 */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT22, 0x04DC, 0x01C8, 2, 0x07F8, 1), /* MX6Q_PAD_DISP0_DAT22__ECSPI1_MISO */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT22, 0x04DC, 0x01C8, 3, 0x07C8, 1), /* MX6Q_PAD_DISP0_DAT22__AUDMUX_AUD4_TXFS */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT22, 0x04DC, 0x01C8, 4, 0x0000, 0), /* MX6Q_PAD_DISP0_DAT22__SDMA_DBG_BUS_DEV1 */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT22, 0x04DC, 0x01C8, 5, 0x0000, 0), /* MX6Q_PAD_DISP0_DAT22__GPIO_5_16 */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT22, 0x04DC, 0x01C8, 6, 0x0000, 0), /* MX6Q_PAD_DISP0_DAT22__MMDC_DEBUG_27 */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT22, 0x04DC, 0x01C8, 7, 0x0000, 0), /* MX6Q_PAD_DISP0_DAT22__PL301_PER1_HADR30 */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT23, 0x04E0, 0x01CC, 0, 0x0000, 0), /* MX6Q_PAD_DISP0_DAT23__IPU1_DISP0_DAT_23 */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT23, 0x04E0, 0x01CC, 1, 0x0000, 0), /* MX6Q_PAD_DISP0_DAT23__IPU2_DISP0_DAT_23 */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT23, 0x04E0, 0x01CC, 2, 0x0800, 1), /* MX6Q_PAD_DISP0_DAT23__ECSPI1_SS0 */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT23, 0x04E0, 0x01CC, 3, 0x07B4, 1), /* MX6Q_PAD_DISP0_DAT23__AUDMUX_AUD4_RXD */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT23, 0x04E0, 0x01CC, 4, 0x0000, 0), /* MX6Q_PAD_DISP0_DAT23__SDMA_DBG_BUS_DEV2 */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT23, 0x04E0, 0x01CC, 5, 0x0000, 0), /* MX6Q_PAD_DISP0_DAT23__GPIO_5_17 */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT23, 0x04E0, 0x01CC, 6, 0x0000, 0), /* MX6Q_PAD_DISP0_DAT23__MMDC_DEBUG_28 */ + IMX_PIN_REG(MX6Q_PAD_DISP0_DAT23, 0x04E0, 0x01CC, 7, 0x0000, 0), /* MX6Q_PAD_DISP0_DAT23__PL301_PER1_HADR31 */ + IMX_PIN_REG(MX6Q_PAD_ENET_MDIO, 0x04E4, 0x01D0, 0, 0x0000, 0), /* MX6Q_PAD_ENET_MDIO__RESERVED_RESERVED */ + IMX_PIN_REG(MX6Q_PAD_ENET_MDIO, 0x04E4, 0x01D0, 1, 0x0840, 0), /* MX6Q_PAD_ENET_MDIO__ENET_MDIO */ + IMX_PIN_REG(MX6Q_PAD_ENET_MDIO, 0x04E4, 0x01D0, 2, 0x086C, 0), /* MX6Q_PAD_ENET_MDIO__ESAI1_SCKR */ + IMX_PIN_REG(MX6Q_PAD_ENET_MDIO, 0x04E4, 0x01D0, 3, 0x0000, 0), /* MX6Q_PAD_ENET_MDIO__SDMA_DEBUG_BUS_DEV3 */ + IMX_PIN_REG(MX6Q_PAD_ENET_MDIO, 0x04E4, 0x01D0, 4, 0x0000, 0), /* MX6Q_PAD_ENET_MDIO__ENET_1588_EVT1_OUT */ + IMX_PIN_REG(MX6Q_PAD_ENET_MDIO, 0x04E4, 0x01D0, 5, 0x0000, 0), /* MX6Q_PAD_ENET_MDIO__GPIO_1_22 */ + IMX_PIN_REG(MX6Q_PAD_ENET_MDIO, 0x04E4, 0x01D0, 6, 0x0000, 0), /* MX6Q_PAD_ENET_MDIO__SPDIF_PLOCK */ + IMX_PIN_REG(MX6Q_PAD_ENET_REF_CLK, 0x04E8, 0x01D4, 0, 0x0000, 0), /* MX6Q_PAD_ENET_REF_CLK__RESERVED_RSRVED */ + IMX_PIN_REG(MX6Q_PAD_ENET_REF_CLK, 0x04E8, 0x01D4, 1, 0x0000, 0), /* MX6Q_PAD_ENET_REF_CLK__ENET_TX_CLK */ + IMX_PIN_REG(MX6Q_PAD_ENET_REF_CLK, 0x04E8, 0x01D4, 2, 0x085C, 0), /* MX6Q_PAD_ENET_REF_CLK__ESAI1_FSR */ + IMX_PIN_REG(MX6Q_PAD_ENET_REF_CLK, 0x04E8, 0x01D4, 3, 0x0000, 0), /* MX6Q_PAD_ENET_REF_CLK__SDMA_DBGBUS_DEV4 */ + IMX_PIN_REG(MX6Q_PAD_ENET_REF_CLK, 0x04E8, 0x01D4, 5, 0x0000, 0), /* MX6Q_PAD_ENET_REF_CLK__GPIO_1_23 */ + IMX_PIN_REG(MX6Q_PAD_ENET_REF_CLK, 0x04E8, 0x01D4, 6, 0x0000, 0), /* MX6Q_PAD_ENET_REF_CLK__SPDIF_SRCLK */ + IMX_PIN_REG(MX6Q_PAD_ENET_REF_CLK, 0x04E8, 0x01D4, 7, 0x0000, 0), /* MX6Q_PAD_ENET_REF_CLK__USBPHY1_RX_SQH */ + IMX_PIN_REG(MX6Q_PAD_ENET_RX_ER, 0x04EC, 0x01D8, 1, 0x0000, 0), /* MX6Q_PAD_ENET_RX_ER__ENET_RX_ER */ + IMX_PIN_REG(MX6Q_PAD_ENET_RX_ER, 0x04EC, 0x01D8, 2, 0x0864, 0), /* MX6Q_PAD_ENET_RX_ER__ESAI1_HCKR */ + IMX_PIN_REG(MX6Q_PAD_ENET_RX_ER, 0x04EC, 0x01D8, 3, 0x0914, 1), /* MX6Q_PAD_ENET_RX_ER__SPDIF_IN1 */ + IMX_PIN_REG(MX6Q_PAD_ENET_RX_ER, 0x04EC, 0x01D8, 4, 0x0000, 0), /* MX6Q_PAD_ENET_RX_ER__ENET_1588_EVT2_OUT */ + IMX_PIN_REG(MX6Q_PAD_ENET_RX_ER, 0x04EC, 0x01D8, 5, 0x0000, 0), /* MX6Q_PAD_ENET_RX_ER__GPIO_1_24 */ + IMX_PIN_REG(MX6Q_PAD_ENET_RX_ER, 0x04EC, 0x01D8, 6, 0x0000, 0), /* MX6Q_PAD_ENET_RX_ER__PHY_TDI */ + IMX_PIN_REG(MX6Q_PAD_ENET_RX_ER, 0x04EC, 0x01D8, 7, 0x0000, 0), /* MX6Q_PAD_ENET_RX_ER__USBPHY1_RX_HS_RXD */ + IMX_PIN_REG(MX6Q_PAD_ENET_CRS_DV, 0x04F0, 0x01DC, 0, 0x0000, 0), /* MX6Q_PAD_ENET_CRS_DV__RESERVED_RSRVED */ + IMX_PIN_REG(MX6Q_PAD_ENET_CRS_DV, 0x04F0, 0x01DC, 1, 0x0858, 1), /* MX6Q_PAD_ENET_CRS_DV__ENET_RX_EN */ + IMX_PIN_REG(MX6Q_PAD_ENET_CRS_DV, 0x04F0, 0x01DC, 2, 0x0870, 0), /* MX6Q_PAD_ENET_CRS_DV__ESAI1_SCKT */ + IMX_PIN_REG(MX6Q_PAD_ENET_CRS_DV, 0x04F0, 0x01DC, 3, 0x0918, 1), /* MX6Q_PAD_ENET_CRS_DV__SPDIF_EXTCLK */ + IMX_PIN_REG(MX6Q_PAD_ENET_CRS_DV, 0x04F0, 0x01DC, 5, 0x0000, 0), /* MX6Q_PAD_ENET_CRS_DV__GPIO_1_25 */ + IMX_PIN_REG(MX6Q_PAD_ENET_CRS_DV, 0x04F0, 0x01DC, 6, 0x0000, 0), /* MX6Q_PAD_ENET_CRS_DV__PHY_TDO */ + IMX_PIN_REG(MX6Q_PAD_ENET_CRS_DV, 0x04F0, 0x01DC, 7, 0x0000, 0), /* MX6Q_PAD_ENET_CRS_DV__USBPHY1_RX_FS_RXD */ + IMX_PIN_REG(MX6Q_PAD_ENET_RXD1, 0x04F4, 0x01E0, 0, 0x0908, 0), /* MX6Q_PAD_ENET_RXD1__MLB_MLBSIG */ + IMX_PIN_REG(MX6Q_PAD_ENET_RXD1, 0x04F4, 0x01E0, 1, 0x084C, 1), /* MX6Q_PAD_ENET_RXD1__ENET_RDATA_1 */ + IMX_PIN_REG(MX6Q_PAD_ENET_RXD1, 0x04F4, 0x01E0, 2, 0x0860, 0), /* MX6Q_PAD_ENET_RXD1__ESAI1_FST */ + IMX_PIN_REG(MX6Q_PAD_ENET_RXD1, 0x04F4, 0x01E0, 4, 0x0000, 0), /* MX6Q_PAD_ENET_RXD1__ENET_1588_EVT3_OUT */ + IMX_PIN_REG(MX6Q_PAD_ENET_RXD1, 0x04F4, 0x01E0, 5, 0x0000, 0), /* MX6Q_PAD_ENET_RXD1__GPIO_1_26 */ + IMX_PIN_REG(MX6Q_PAD_ENET_RXD1, 0x04F4, 0x01E0, 6, 0x0000, 0), /* MX6Q_PAD_ENET_RXD1__PHY_TCK */ + IMX_PIN_REG(MX6Q_PAD_ENET_RXD1, 0x04F4, 0x01E0, 7, 0x0000, 0), /* MX6Q_PAD_ENET_RXD1__USBPHY1_RX_DISCON */ + IMX_PIN_REG(MX6Q_PAD_ENET_RXD0, 0x04F8, 0x01E4, 0, 0x0000, 0), /* MX6Q_PAD_ENET_RXD0__OSC32K_32K_OUT */ + IMX_PIN_REG(MX6Q_PAD_ENET_RXD0, 0x04F8, 0x01E4, 1, 0x0848, 1), /* MX6Q_PAD_ENET_RXD0__ENET_RDATA_0 */ + IMX_PIN_REG(MX6Q_PAD_ENET_RXD0, 0x04F8, 0x01E4, 2, 0x0868, 0), /* MX6Q_PAD_ENET_RXD0__ESAI1_HCKT */ + IMX_PIN_REG(MX6Q_PAD_ENET_RXD0, 0x04F8, 0x01E4, 3, 0x0000, 0), /* MX6Q_PAD_ENET_RXD0__SPDIF_OUT1 */ + IMX_PIN_REG(MX6Q_PAD_ENET_RXD0, 0x04F8, 0x01E4, 5, 0x0000, 0), /* MX6Q_PAD_ENET_RXD0__GPIO_1_27 */ + IMX_PIN_REG(MX6Q_PAD_ENET_RXD0, 0x04F8, 0x01E4, 6, 0x0000, 0), /* MX6Q_PAD_ENET_RXD0__PHY_TMS */ + IMX_PIN_REG(MX6Q_PAD_ENET_RXD0, 0x04F8, 0x01E4, 7, 0x0000, 0), /* MX6Q_PAD_ENET_RXD0__USBPHY1_PLL_CK20DIV */ + IMX_PIN_REG(MX6Q_PAD_ENET_TX_EN, 0x04FC, 0x01E8, 0, 0x0000, 0), /* MX6Q_PAD_ENET_TX_EN__RESERVED_RSRVED */ + IMX_PIN_REG(MX6Q_PAD_ENET_TX_EN, 0x04FC, 0x01E8, 1, 0x0000, 0), /* MX6Q_PAD_ENET_TX_EN__ENET_TX_EN */ + IMX_PIN_REG(MX6Q_PAD_ENET_TX_EN, 0x04FC, 0x01E8, 2, 0x0880, 0), /* MX6Q_PAD_ENET_TX_EN__ESAI1_TX3_RX2 */ + IMX_PIN_REG(MX6Q_PAD_ENET_TX_EN, 0x04FC, 0x01E8, 5, 0x0000, 0), /* MX6Q_PAD_ENET_TX_EN__GPIO_1_28 */ + IMX_PIN_REG(MX6Q_PAD_ENET_TX_EN, 0x04FC, 0x01E8, 6, 0x0000, 0), /* MX6Q_PAD_ENET_TX_EN__SATA_PHY_TDI */ + IMX_PIN_REG(MX6Q_PAD_ENET_TX_EN, 0x04FC, 0x01E8, 7, 0x0000, 0), /* MX6Q_PAD_ENET_TX_EN__USBPHY2_RX_SQH */ + IMX_PIN_REG(MX6Q_PAD_ENET_TXD1, 0x0500, 0x01EC, 0, 0x0900, 0), /* MX6Q_PAD_ENET_TXD1__MLB_MLBCLK */ + IMX_PIN_REG(MX6Q_PAD_ENET_TXD1, 0x0500, 0x01EC, 1, 0x0000, 0), /* MX6Q_PAD_ENET_TXD1__ENET_TDATA_1 */ + IMX_PIN_REG(MX6Q_PAD_ENET_TXD1, 0x0500, 0x01EC, 2, 0x087C, 0), /* MX6Q_PAD_ENET_TXD1__ESAI1_TX2_RX3 */ + IMX_PIN_REG(MX6Q_PAD_ENET_TXD1, 0x0500, 0x01EC, 4, 0x0000, 0), /* MX6Q_PAD_ENET_TXD1__ENET_1588_EVENT0_IN */ + IMX_PIN_REG(MX6Q_PAD_ENET_TXD1, 0x0500, 0x01EC, 5, 0x0000, 0), /* MX6Q_PAD_ENET_TXD1__GPIO_1_29 */ + IMX_PIN_REG(MX6Q_PAD_ENET_TXD1, 0x0500, 0x01EC, 6, 0x0000, 0), /* MX6Q_PAD_ENET_TXD1__SATA_PHY_TDO */ + IMX_PIN_REG(MX6Q_PAD_ENET_TXD1, 0x0500, 0x01EC, 7, 0x0000, 0), /* MX6Q_PAD_ENET_TXD1__USBPHY2_RX_HS_RXD */ + IMX_PIN_REG(MX6Q_PAD_ENET_TXD0, 0x0504, 0x01F0, 0, 0x0000, 0), /* MX6Q_PAD_ENET_TXD0__RESERVED_RSRVED */ + IMX_PIN_REG(MX6Q_PAD_ENET_TXD0, 0x0504, 0x01F0, 1, 0x0000, 0), /* MX6Q_PAD_ENET_TXD0__ENET_TDATA_0 */ + IMX_PIN_REG(MX6Q_PAD_ENET_TXD0, 0x0504, 0x01F0, 2, 0x0884, 0), /* MX6Q_PAD_ENET_TXD0__ESAI1_TX4_RX1 */ + IMX_PIN_REG(MX6Q_PAD_ENET_TXD0, 0x0504, 0x01F0, 5, 0x0000, 0), /* MX6Q_PAD_ENET_TXD0__GPIO_1_30 */ + IMX_PIN_REG(MX6Q_PAD_ENET_TXD0, 0x0504, 0x01F0, 6, 0x0000, 0), /* MX6Q_PAD_ENET_TXD0__SATA_PHY_TCK */ + IMX_PIN_REG(MX6Q_PAD_ENET_TXD0, 0x0504, 0x01F0, 7, 0x0000, 0), /* MX6Q_PAD_ENET_TXD0__USBPHY2_RX_FS_RXD */ + IMX_PIN_REG(MX6Q_PAD_ENET_MDC, 0x0508, 0x01F4, 0, 0x0904, 0), /* MX6Q_PAD_ENET_MDC__MLB_MLBDAT */ + IMX_PIN_REG(MX6Q_PAD_ENET_MDC, 0x0508, 0x01F4, 1, 0x0000, 0), /* MX6Q_PAD_ENET_MDC__ENET_MDC */ + IMX_PIN_REG(MX6Q_PAD_ENET_MDC, 0x0508, 0x01F4, 2, 0x0888, 0), /* MX6Q_PAD_ENET_MDC__ESAI1_TX5_RX0 */ + IMX_PIN_REG(MX6Q_PAD_ENET_MDC, 0x0508, 0x01F4, 4, 0x0000, 0), /* MX6Q_PAD_ENET_MDC__ENET_1588_EVENT1_IN */ + IMX_PIN_REG(MX6Q_PAD_ENET_MDC, 0x0508, 0x01F4, 5, 0x0000, 0), /* MX6Q_PAD_ENET_MDC__GPIO_1_31 */ + IMX_PIN_REG(MX6Q_PAD_ENET_MDC, 0x0508, 0x01F4, 6, 0x0000, 0), /* MX6Q_PAD_ENET_MDC__SATA_PHY_TMS */ + IMX_PIN_REG(MX6Q_PAD_ENET_MDC, 0x0508, 0x01F4, 7, 0x0000, 0), /* MX6Q_PAD_ENET_MDC__USBPHY2_RX_DISCON */ + IMX_PIN_REG(MX6Q_PAD_DRAM_D40, NO_PAD, NO_MUX, 0, 0x0000, 0), /* MX6Q_PAD_DRAM_D40__MMDC_DRAM_D_40 */ + IMX_PIN_REG(MX6Q_PAD_DRAM_D41, NO_PAD, NO_MUX, 0, 0x0000, 0), /* MX6Q_PAD_DRAM_D41__MMDC_DRAM_D_41 */ + IMX_PIN_REG(MX6Q_PAD_DRAM_D42, NO_PAD, NO_MUX, 0, 0x0000, 0), /* MX6Q_PAD_DRAM_D42__MMDC_DRAM_D_42 */ + IMX_PIN_REG(MX6Q_PAD_DRAM_D43, NO_PAD, NO_MUX, 0, 0x0000, 0), /* MX6Q_PAD_DRAM_D43__MMDC_DRAM_D_43 */ + IMX_PIN_REG(MX6Q_PAD_DRAM_D44, NO_PAD, NO_MUX, 0, 0x0000, 0), /* MX6Q_PAD_DRAM_D44__MMDC_DRAM_D_44 */ + IMX_PIN_REG(MX6Q_PAD_DRAM_D45, NO_PAD, NO_MUX, 0, 0x0000, 0), /* MX6Q_PAD_DRAM_D45__MMDC_DRAM_D_45 */ + IMX_PIN_REG(MX6Q_PAD_DRAM_D46, NO_PAD, NO_MUX, 0, 0x0000, 0), /* MX6Q_PAD_DRAM_D46__MMDC_DRAM_D_46 */ + IMX_PIN_REG(MX6Q_PAD_DRAM_D47, NO_PAD, NO_MUX, 0, 0x0000, 0), /* MX6Q_PAD_DRAM_D47__MMDC_DRAM_D_47 */ + IMX_PIN_REG(MX6Q_PAD_DRAM_SDQS5, 0x050C, NO_MUX, 0, 0x0000, 0), /* MX6Q_PAD_DRAM_SDQS5__MMDC_DRAM_SDQS_5 */ + IMX_PIN_REG(MX6Q_PAD_DRAM_DQM5, 0x0510, NO_MUX, 0, 0x0000, 0), /* MX6Q_PAD_DRAM_DQM5__MMDC_DRAM_DQM_5 */ + IMX_PIN_REG(MX6Q_PAD_DRAM_D32, NO_PAD, NO_MUX, 0, 0x0000, 0), /* MX6Q_PAD_DRAM_D32__MMDC_DRAM_D_32 */ + IMX_PIN_REG(MX6Q_PAD_DRAM_D33, NO_PAD, NO_MUX, 0, 0x0000, 0), /* MX6Q_PAD_DRAM_D33__MMDC_DRAM_D_33 */ + IMX_PIN_REG(MX6Q_PAD_DRAM_D34, NO_PAD, NO_MUX, 0, 0x0000, 0), /* MX6Q_PAD_DRAM_D34__MMDC_DRAM_D_34 */ + IMX_PIN_REG(MX6Q_PAD_DRAM_D35, NO_PAD, NO_MUX, 0, 0x0000, 0), /* MX6Q_PAD_DRAM_D35__MMDC_DRAM_D_35 */ + IMX_PIN_REG(MX6Q_PAD_DRAM_D36, NO_PAD, NO_MUX, 0, 0x0000, 0), /* MX6Q_PAD_DRAM_D36__MMDC_DRAM_D_36 */ + IMX_PIN_REG(MX6Q_PAD_DRAM_D37, NO_PAD, NO_MUX, 0, 0x0000, 0), /* MX6Q_PAD_DRAM_D37__MMDC_DRAM_D_37 */ + IMX_PIN_REG(MX6Q_PAD_DRAM_D38, NO_PAD, NO_MUX, 0, 0x0000, 0), /* MX6Q_PAD_DRAM_D38__MMDC_DRAM_D_38 */ + IMX_PIN_REG(MX6Q_PAD_DRAM_D39, NO_PAD, NO_MUX, 0, 0x0000, 0), /* MX6Q_PAD_DRAM_D39__MMDC_DRAM_D_39 */ + IMX_PIN_REG(MX6Q_PAD_DRAM_DQM4, 0x0514, NO_MUX, 0, 0x0000, 0), /* MX6Q_PAD_DRAM_DQM4__MMDC_DRAM_DQM_4 */ + IMX_PIN_REG(MX6Q_PAD_DRAM_SDQS4, 0x0518, NO_MUX, 0, 0x0000, 0), /* MX6Q_PAD_DRAM_SDQS4__MMDC_DRAM_SDQS_4 */ + IMX_PIN_REG(MX6Q_PAD_DRAM_D24, NO_PAD, NO_MUX, 0, 0x0000, 0), /* MX6Q_PAD_DRAM_D24__MMDC_DRAM_D_24 */ + IMX_PIN_REG(MX6Q_PAD_DRAM_D25, NO_PAD, NO_MUX, 0, 0x0000, 0), /* MX6Q_PAD_DRAM_D25__MMDC_DRAM_D_25 */ + IMX_PIN_REG(MX6Q_PAD_DRAM_D26, NO_PAD, NO_MUX, 0, 0x0000, 0), /* MX6Q_PAD_DRAM_D26__MMDC_DRAM_D_26 */ + IMX_PIN_REG(MX6Q_PAD_DRAM_D27, NO_PAD, NO_MUX, 0, 0x0000, 0), /* MX6Q_PAD_DRAM_D27__MMDC_DRAM_D_27 */ + IMX_PIN_REG(MX6Q_PAD_DRAM_D28, NO_PAD, NO_MUX, 0, 0x0000, 0), /* MX6Q_PAD_DRAM_D28__MMDC_DRAM_D_28 */ + IMX_PIN_REG(MX6Q_PAD_DRAM_D29, NO_PAD, NO_MUX, 0, 0x0000, 0), /* MX6Q_PAD_DRAM_D29__MMDC_DRAM_D_29 */ + IMX_PIN_REG(MX6Q_PAD_DRAM_SDQS3, 0x051C, NO_MUX, 0, 0x0000, 0), /* MX6Q_PAD_DRAM_SDQS3__MMDC_DRAM_SDQS_3 */ + IMX_PIN_REG(MX6Q_PAD_DRAM_D30, NO_PAD, NO_MUX, 0, 0x0000, 0), /* MX6Q_PAD_DRAM_D30__MMDC_DRAM_D_30 */ + IMX_PIN_REG(MX6Q_PAD_DRAM_D31, NO_PAD, NO_MUX, 0, 0x0000, 0), /* MX6Q_PAD_DRAM_D31__MMDC_DRAM_D_31 */ + IMX_PIN_REG(MX6Q_PAD_DRAM_DQM3, 0x0520, NO_MUX, 0, 0x0000, 0), /* MX6Q_PAD_DRAM_DQM3__MMDC_DRAM_DQM_3 */ + IMX_PIN_REG(MX6Q_PAD_DRAM_D16, NO_PAD, NO_MUX, 0, 0x0000, 0), /* MX6Q_PAD_DRAM_D16__MMDC_DRAM_D_16 */ + IMX_PIN_REG(MX6Q_PAD_DRAM_D17, NO_PAD, NO_MUX, 0, 0x0000, 0), /* MX6Q_PAD_DRAM_D17__MMDC_DRAM_D_17 */ + IMX_PIN_REG(MX6Q_PAD_DRAM_D18, NO_PAD, NO_MUX, 0, 0x0000, 0), /* MX6Q_PAD_DRAM_D18__MMDC_DRAM_D_18 */ + IMX_PIN_REG(MX6Q_PAD_DRAM_D19, NO_PAD, NO_MUX, 0, 0x0000, 0), /* MX6Q_PAD_DRAM_D19__MMDC_DRAM_D_19 */ + IMX_PIN_REG(MX6Q_PAD_DRAM_D20, NO_PAD, NO_MUX, 0, 0x0000, 0), /* MX6Q_PAD_DRAM_D20__MMDC_DRAM_D_20 */ + IMX_PIN_REG(MX6Q_PAD_DRAM_D21, NO_PAD, NO_MUX, 0, 0x0000, 0), /* MX6Q_PAD_DRAM_D21__MMDC_DRAM_D_21 */ + IMX_PIN_REG(MX6Q_PAD_DRAM_D22, NO_PAD, NO_MUX, 0, 0x0000, 0), /* MX6Q_PAD_DRAM_D22__MMDC_DRAM_D_22 */ + IMX_PIN_REG(MX6Q_PAD_DRAM_SDQS2, 0x0524, NO_MUX, 0, 0x0000, 0), /* MX6Q_PAD_DRAM_SDQS2__MMDC_DRAM_SDQS_2 */ + IMX_PIN_REG(MX6Q_PAD_DRAM_D23, NO_PAD, NO_MUX, 0, 0x0000, 0), /* MX6Q_PAD_DRAM_D23__MMDC_DRAM_D_23 */ + IMX_PIN_REG(MX6Q_PAD_DRAM_DQM2, 0x0528, NO_MUX, 0, 0x0000, 0), /* MX6Q_PAD_DRAM_DQM2__MMDC_DRAM_DQM_2 */ + IMX_PIN_REG(MX6Q_PAD_DRAM_A0, 0x052C, NO_MUX, 0, 0x0000, 0), /* MX6Q_PAD_DRAM_A0__MMDC_DRAM_A_0 */ + IMX_PIN_REG(MX6Q_PAD_DRAM_A1, 0x0530, NO_MUX, 0, 0x0000, 0), /* MX6Q_PAD_DRAM_A1__MMDC_DRAM_A_1 */ + IMX_PIN_REG(MX6Q_PAD_DRAM_A2, 0x0534, NO_MUX, 0, 0x0000, 0), /* MX6Q_PAD_DRAM_A2__MMDC_DRAM_A_2 */ + IMX_PIN_REG(MX6Q_PAD_DRAM_A3, 0x0538, NO_MUX, 0, 0x0000, 0), /* MX6Q_PAD_DRAM_A3__MMDC_DRAM_A_3 */ + IMX_PIN_REG(MX6Q_PAD_DRAM_A4, 0x053C, NO_MUX, 0, 0x0000, 0), /* MX6Q_PAD_DRAM_A4__MMDC_DRAM_A_4 */ + IMX_PIN_REG(MX6Q_PAD_DRAM_A5, 0x0540, NO_MUX, 0, 0x0000, 0), /* MX6Q_PAD_DRAM_A5__MMDC_DRAM_A_5 */ + IMX_PIN_REG(MX6Q_PAD_DRAM_A6, 0x0544, NO_MUX, 0, 0x0000, 0), /* MX6Q_PAD_DRAM_A6__MMDC_DRAM_A_6 */ + IMX_PIN_REG(MX6Q_PAD_DRAM_A7, 0x0548, NO_MUX, 0, 0x0000, 0), /* MX6Q_PAD_DRAM_A7__MMDC_DRAM_A_7 */ + IMX_PIN_REG(MX6Q_PAD_DRAM_A8, 0x054C, NO_MUX, 0, 0x0000, 0), /* MX6Q_PAD_DRAM_A8__MMDC_DRAM_A_8 */ + IMX_PIN_REG(MX6Q_PAD_DRAM_A9, 0x0550, NO_MUX, 0, 0x0000, 0), /* MX6Q_PAD_DRAM_A9__MMDC_DRAM_A_9 */ + IMX_PIN_REG(MX6Q_PAD_DRAM_A10, 0x0554, NO_MUX, 0, 0x0000, 0), /* MX6Q_PAD_DRAM_A10__MMDC_DRAM_A_10 */ + IMX_PIN_REG(MX6Q_PAD_DRAM_A11, 0x0558, NO_MUX, 0, 0x0000, 0), /* MX6Q_PAD_DRAM_A11__MMDC_DRAM_A_11 */ + IMX_PIN_REG(MX6Q_PAD_DRAM_A12, 0x055C, NO_MUX, 0, 0x0000, 0), /* MX6Q_PAD_DRAM_A12__MMDC_DRAM_A_12 */ + IMX_PIN_REG(MX6Q_PAD_DRAM_A13, 0x0560, NO_MUX, 0, 0x0000, 0), /* MX6Q_PAD_DRAM_A13__MMDC_DRAM_A_13 */ + IMX_PIN_REG(MX6Q_PAD_DRAM_A14, 0x0564, NO_MUX, 0, 0x0000, 0), /* MX6Q_PAD_DRAM_A14__MMDC_DRAM_A_14 */ + IMX_PIN_REG(MX6Q_PAD_DRAM_A15, 0x0568, NO_MUX, 0, 0x0000, 0), /* MX6Q_PAD_DRAM_A15__MMDC_DRAM_A_15 */ + IMX_PIN_REG(MX6Q_PAD_DRAM_CAS, 0x056C, NO_MUX, 0, 0x0000, 0), /* MX6Q_PAD_DRAM_CAS__MMDC_DRAM_CAS */ + IMX_PIN_REG(MX6Q_PAD_DRAM_CS0, 0x0570, NO_MUX, 0, 0x0000, 0), /* MX6Q_PAD_DRAM_CS0__MMDC_DRAM_CS_0 */ + IMX_PIN_REG(MX6Q_PAD_DRAM_CS1, 0x0574, NO_MUX, 0, 0x0000, 0), /* MX6Q_PAD_DRAM_CS1__MMDC_DRAM_CS_1 */ + IMX_PIN_REG(MX6Q_PAD_DRAM_RAS, 0x0578, NO_MUX, 0, 0x0000, 0), /* MX6Q_PAD_DRAM_RAS__MMDC_DRAM_RAS */ + IMX_PIN_REG(MX6Q_PAD_DRAM_RESET, 0x057C, NO_MUX, 0, 0x0000, 0), /* MX6Q_PAD_DRAM_RESET__MMDC_DRAM_RESET */ + IMX_PIN_REG(MX6Q_PAD_DRAM_SDBA0, 0x0580, NO_MUX, 0, 0x0000, 0), /* MX6Q_PAD_DRAM_SDBA0__MMDC_DRAM_SDBA_0 */ + IMX_PIN_REG(MX6Q_PAD_DRAM_SDBA1, 0x0584, NO_MUX, 0, 0x0000, 0), /* MX6Q_PAD_DRAM_SDBA1__MMDC_DRAM_SDBA_1 */ + IMX_PIN_REG(MX6Q_PAD_DRAM_SDCLK_0, 0x0588, NO_MUX, 0, 0x0000, 0), /* MX6Q_PAD_DRAM_SDCLK_0__MMDC_DRAM_SDCLK0 */ + IMX_PIN_REG(MX6Q_PAD_DRAM_SDBA2, 0x058C, NO_MUX, 0, 0x0000, 0), /* MX6Q_PAD_DRAM_SDBA2__MMDC_DRAM_SDBA_2 */ + IMX_PIN_REG(MX6Q_PAD_DRAM_SDCKE0, 0x0590, NO_MUX, 0, 0x0000, 0), /* MX6Q_PAD_DRAM_SDCKE0__MMDC_DRAM_SDCKE_0 */ + IMX_PIN_REG(MX6Q_PAD_DRAM_SDCLK_1, 0x0594, NO_MUX, 0, 0x0000, 0), /* MX6Q_PAD_DRAM_SDCLK_1__MMDC_DRAM_SDCLK1 */ + IMX_PIN_REG(MX6Q_PAD_DRAM_SDCKE1, 0x0598, NO_MUX, 0, 0x0000, 0), /* MX6Q_PAD_DRAM_SDCKE1__MMDC_DRAM_SDCKE_1 */ + IMX_PIN_REG(MX6Q_PAD_DRAM_SDODT0, 0x059C, NO_MUX, 0, 0x0000, 0), /* MX6Q_PAD_DRAM_SDODT0__MMDC_DRAM_ODT_0 */ + IMX_PIN_REG(MX6Q_PAD_DRAM_SDODT1, 0x05A0, NO_MUX, 0, 0x0000, 0), /* MX6Q_PAD_DRAM_SDODT1__MMDC_DRAM_ODT_1 */ + IMX_PIN_REG(MX6Q_PAD_DRAM_SDWE, 0x05A4, NO_MUX, 0, 0x0000, 0), /* MX6Q_PAD_DRAM_SDWE__MMDC_DRAM_SDWE */ + IMX_PIN_REG(MX6Q_PAD_DRAM_D0, NO_PAD, NO_MUX, 0, 0x0000, 0), /* MX6Q_PAD_DRAM_D0__MMDC_DRAM_D_0 */ + IMX_PIN_REG(MX6Q_PAD_DRAM_D1, NO_PAD, NO_MUX, 0, 0x0000, 0), /* MX6Q_PAD_DRAM_D1__MMDC_DRAM_D_1 */ + IMX_PIN_REG(MX6Q_PAD_DRAM_D2, NO_PAD, NO_MUX, 0, 0x0000, 0), /* MX6Q_PAD_DRAM_D2__MMDC_DRAM_D_2 */ + IMX_PIN_REG(MX6Q_PAD_DRAM_D3, NO_PAD, NO_MUX, 0, 0x0000, 0), /* MX6Q_PAD_DRAM_D3__MMDC_DRAM_D_3 */ + IMX_PIN_REG(MX6Q_PAD_DRAM_D4, NO_PAD, NO_MUX, 0, 0x0000, 0), /* MX6Q_PAD_DRAM_D4__MMDC_DRAM_D_4 */ + IMX_PIN_REG(MX6Q_PAD_DRAM_D5, NO_PAD, NO_MUX, 0, 0x0000, 0), /* MX6Q_PAD_DRAM_D5__MMDC_DRAM_D_5 */ + IMX_PIN_REG(MX6Q_PAD_DRAM_SDQS0, 0x05A8, NO_MUX, 0, 0x0000, 0), /* MX6Q_PAD_DRAM_SDQS0__MMDC_DRAM_SDQS_0 */ + IMX_PIN_REG(MX6Q_PAD_DRAM_D6, NO_PAD, NO_MUX, 0, 0x0000, 0), /* MX6Q_PAD_DRAM_D6__MMDC_DRAM_D_6 */ + IMX_PIN_REG(MX6Q_PAD_DRAM_D7, NO_PAD, NO_MUX, 0, 0x0000, 0), /* MX6Q_PAD_DRAM_D7__MMDC_DRAM_D_7 */ + IMX_PIN_REG(MX6Q_PAD_DRAM_DQM0, 0x05AC, NO_MUX, 0, 0x0000, 0), /* MX6Q_PAD_DRAM_DQM0__MMDC_DRAM_DQM_0 */ + IMX_PIN_REG(MX6Q_PAD_DRAM_D8, NO_PAD, NO_MUX, 0, 0x0000, 0), /* MX6Q_PAD_DRAM_D8__MMDC_DRAM_D_8 */ + IMX_PIN_REG(MX6Q_PAD_DRAM_D9, NO_PAD, NO_MUX, 0, 0x0000, 0), /* MX6Q_PAD_DRAM_D9__MMDC_DRAM_D_9 */ + IMX_PIN_REG(MX6Q_PAD_DRAM_D10, NO_PAD, NO_MUX, 0, 0x0000, 0), /* MX6Q_PAD_DRAM_D10__MMDC_DRAM_D_10 */ + IMX_PIN_REG(MX6Q_PAD_DRAM_D11, NO_PAD, NO_MUX, 0, 0x0000, 0), /* MX6Q_PAD_DRAM_D11__MMDC_DRAM_D_11 */ + IMX_PIN_REG(MX6Q_PAD_DRAM_D12, NO_PAD, NO_MUX, 0, 0x0000, 0), /* MX6Q_PAD_DRAM_D12__MMDC_DRAM_D_12 */ + IMX_PIN_REG(MX6Q_PAD_DRAM_D13, NO_PAD, NO_MUX, 0, 0x0000, 0), /* MX6Q_PAD_DRAM_D13__MMDC_DRAM_D_13 */ + IMX_PIN_REG(MX6Q_PAD_DRAM_D14, NO_PAD, NO_MUX, 0, 0x0000, 0), /* MX6Q_PAD_DRAM_D14__MMDC_DRAM_D_14 */ + IMX_PIN_REG(MX6Q_PAD_DRAM_SDQS1, 0x05B0, NO_MUX, 0, 0x0000, 0), /* MX6Q_PAD_DRAM_SDQS1__MMDC_DRAM_SDQS_1 */ + IMX_PIN_REG(MX6Q_PAD_DRAM_D15, NO_PAD, NO_MUX, 0, 0x0000, 0), /* MX6Q_PAD_DRAM_D15__MMDC_DRAM_D_15 */ + IMX_PIN_REG(MX6Q_PAD_DRAM_DQM1, 0x05B4, NO_MUX, 0, 0x0000, 0), /* MX6Q_PAD_DRAM_DQM1__MMDC_DRAM_DQM_1 */ + IMX_PIN_REG(MX6Q_PAD_DRAM_D48, NO_PAD, NO_MUX, 0, 0x0000, 0), /* MX6Q_PAD_DRAM_D48__MMDC_DRAM_D_48 */ + IMX_PIN_REG(MX6Q_PAD_DRAM_D49, NO_PAD, NO_MUX, 0, 0x0000, 0), /* MX6Q_PAD_DRAM_D49__MMDC_DRAM_D_49 */ + IMX_PIN_REG(MX6Q_PAD_DRAM_D50, NO_PAD, NO_MUX, 0, 0x0000, 0), /* MX6Q_PAD_DRAM_D50__MMDC_DRAM_D_50 */ + IMX_PIN_REG(MX6Q_PAD_DRAM_D51, NO_PAD, NO_MUX, 0, 0x0000, 0), /* MX6Q_PAD_DRAM_D51__MMDC_DRAM_D_51 */ + IMX_PIN_REG(MX6Q_PAD_DRAM_D52, NO_PAD, NO_MUX, 0, 0x0000, 0), /* MX6Q_PAD_DRAM_D52__MMDC_DRAM_D_52 */ + IMX_PIN_REG(MX6Q_PAD_DRAM_D53, NO_PAD, NO_MUX, 0, 0x0000, 0), /* MX6Q_PAD_DRAM_D53__MMDC_DRAM_D_53 */ + IMX_PIN_REG(MX6Q_PAD_DRAM_D54, NO_PAD, NO_MUX, 0, 0x0000, 0), /* MX6Q_PAD_DRAM_D54__MMDC_DRAM_D_54 */ + IMX_PIN_REG(MX6Q_PAD_DRAM_D55, NO_PAD, NO_MUX, 0, 0x0000, 0), /* MX6Q_PAD_DRAM_D55__MMDC_DRAM_D_55 */ + IMX_PIN_REG(MX6Q_PAD_DRAM_SDQS6, 0x05B8, NO_MUX, 0, 0x0000, 0), /* MX6Q_PAD_DRAM_SDQS6__MMDC_DRAM_SDQS_6 */ + IMX_PIN_REG(MX6Q_PAD_DRAM_DQM6, 0x05BC, NO_MUX, 0, 0x0000, 0), /* MX6Q_PAD_DRAM_DQM6__MMDC_DRAM_DQM_6 */ + IMX_PIN_REG(MX6Q_PAD_DRAM_D56, NO_PAD, NO_MUX, 0, 0x0000, 0), /* MX6Q_PAD_DRAM_D56__MMDC_DRAM_D_56 */ + IMX_PIN_REG(MX6Q_PAD_DRAM_SDQS7, 0x05C0, NO_MUX, 0, 0x0000, 0), /* MX6Q_PAD_DRAM_SDQS7__MMDC_DRAM_SDQS_7 */ + IMX_PIN_REG(MX6Q_PAD_DRAM_D57, NO_PAD, NO_MUX, 0, 0x0000, 0), /* MX6Q_PAD_DRAM_D57__MMDC_DRAM_D_57 */ + IMX_PIN_REG(MX6Q_PAD_DRAM_D58, NO_PAD, NO_MUX, 0, 0x0000, 0), /* MX6Q_PAD_DRAM_D58__MMDC_DRAM_D_58 */ + IMX_PIN_REG(MX6Q_PAD_DRAM_D59, NO_PAD, NO_MUX, 0, 0x0000, 0), /* MX6Q_PAD_DRAM_D59__MMDC_DRAM_D_59 */ + IMX_PIN_REG(MX6Q_PAD_DRAM_D60, NO_PAD, NO_MUX, 0, 0x0000, 0), /* MX6Q_PAD_DRAM_D60__MMDC_DRAM_D_60 */ + IMX_PIN_REG(MX6Q_PAD_DRAM_DQM7, 0x05C4, NO_MUX, 0, 0x0000, 0), /* MX6Q_PAD_DRAM_DQM7__MMDC_DRAM_DQM_7 */ + IMX_PIN_REG(MX6Q_PAD_DRAM_D61, NO_PAD, NO_MUX, 0, 0x0000, 0), /* MX6Q_PAD_DRAM_D61__MMDC_DRAM_D_61 */ + IMX_PIN_REG(MX6Q_PAD_DRAM_D62, NO_PAD, NO_MUX, 0, 0x0000, 0), /* MX6Q_PAD_DRAM_D62__MMDC_DRAM_D_62 */ + IMX_PIN_REG(MX6Q_PAD_DRAM_D63, NO_PAD, NO_MUX, 0, 0x0000, 0), /* MX6Q_PAD_DRAM_D63__MMDC_DRAM_D_63 */ + IMX_PIN_REG(MX6Q_PAD_KEY_COL0, 0x05C8, 0x01F8, 0, 0x07F4, 2), /* MX6Q_PAD_KEY_COL0__ECSPI1_SCLK */ + IMX_PIN_REG(MX6Q_PAD_KEY_COL0, 0x05C8, 0x01F8, 1, 0x0854, 1), /* MX6Q_PAD_KEY_COL0__ENET_RDATA_3 */ + IMX_PIN_REG(MX6Q_PAD_KEY_COL0, 0x05C8, 0x01F8, 2, 0x07DC, 1), /* MX6Q_PAD_KEY_COL0__AUDMUX_AUD5_TXC */ + IMX_PIN_REG(MX6Q_PAD_KEY_COL0, 0x05C8, 0x01F8, 3, 0x0000, 0), /* MX6Q_PAD_KEY_COL0__KPP_COL_0 */ + IMX_PIN_REG(MX6Q_PAD_KEY_COL0, 0x05C8, 0x01F8, 4, 0x0000, 0), /* MX6Q_PAD_KEY_COL0__UART4_TXD */ + IMX_PIN_REG(MX6Q_PAD_KEY_COL0, 0x05C8, 0x01F8, 5, 0x0000, 0), /* MX6Q_PAD_KEY_COL0__GPIO_4_6 */ + IMX_PIN_REG(MX6Q_PAD_KEY_COL0, 0x05C8, 0x01F8, 6, 0x0000, 0), /* MX6Q_PAD_KEY_COL0__DCIC1_DCIC_OUT */ + IMX_PIN_REG(MX6Q_PAD_KEY_COL0, 0x05C8, 0x01F8, 7, 0x0000, 0), /* MX6Q_PAD_KEY_COL0__SRC_ANY_PU_RST */ + IMX_PIN_REG(MX6Q_PAD_KEY_ROW0, 0x05CC, 0x01FC, 0, 0x07FC, 2), /* MX6Q_PAD_KEY_ROW0__ECSPI1_MOSI */ + IMX_PIN_REG(MX6Q_PAD_KEY_ROW0, 0x05CC, 0x01FC, 1, 0x0000, 0), /* MX6Q_PAD_KEY_ROW0__ENET_TDATA_3 */ + IMX_PIN_REG(MX6Q_PAD_KEY_ROW0, 0x05CC, 0x01FC, 2, 0x07D0, 1), /* MX6Q_PAD_KEY_ROW0__AUDMUX_AUD5_TXD */ + IMX_PIN_REG(MX6Q_PAD_KEY_ROW0, 0x05CC, 0x01FC, 3, 0x0000, 0), /* MX6Q_PAD_KEY_ROW0__KPP_ROW_0 */ + IMX_PIN_REG(MX6Q_PAD_KEY_ROW0, 0x05CC, 0x01FC, 4, 0x0938, 1), /* MX6Q_PAD_KEY_ROW0__UART4_RXD */ + IMX_PIN_REG(MX6Q_PAD_KEY_ROW0, 0x05CC, 0x01FC, 5, 0x0000, 0), /* MX6Q_PAD_KEY_ROW0__GPIO_4_7 */ + IMX_PIN_REG(MX6Q_PAD_KEY_ROW0, 0x05CC, 0x01FC, 6, 0x0000, 0), /* MX6Q_PAD_KEY_ROW0__DCIC2_DCIC_OUT */ + IMX_PIN_REG(MX6Q_PAD_KEY_ROW0, 0x05CC, 0x01FC, 7, 0x0000, 0), /* MX6Q_PAD_KEY_ROW0__PL301_PER1_HADR_0 */ + IMX_PIN_REG(MX6Q_PAD_KEY_COL1, 0x05D0, 0x0200, 0, 0x07F8, 2), /* MX6Q_PAD_KEY_COL1__ECSPI1_MISO */ + IMX_PIN_REG(MX6Q_PAD_KEY_COL1, 0x05D0, 0x0200, 1, 0x0840, 1), /* MX6Q_PAD_KEY_COL1__ENET_MDIO */ + IMX_PIN_REG(MX6Q_PAD_KEY_COL1, 0x05D0, 0x0200, 2, 0x07E0, 1), /* MX6Q_PAD_KEY_COL1__AUDMUX_AUD5_TXFS */ + IMX_PIN_REG(MX6Q_PAD_KEY_COL1, 0x05D0, 0x0200, 3, 0x0000, 0), /* MX6Q_PAD_KEY_COL1__KPP_COL_1 */ + IMX_PIN_REG(MX6Q_PAD_KEY_COL1, 0x05D0, 0x0200, 4, 0x0000, 0), /* MX6Q_PAD_KEY_COL1__UART5_TXD */ + IMX_PIN_REG(MX6Q_PAD_KEY_COL1, 0x05D0, 0x0200, 5, 0x0000, 0), /* MX6Q_PAD_KEY_COL1__GPIO_4_8 */ + IMX_PIN_REG(MX6Q_PAD_KEY_COL1, 0x05D0, 0x0200, 6, 0x0000, 0), /* MX6Q_PAD_KEY_COL1__USDHC1_VSELECT */ + IMX_PIN_REG(MX6Q_PAD_KEY_COL1, 0x05D0, 0x0200, 7, 0x0000, 0), /* MX6Q_PAD_KEY_COL1__PL301MX_PER1_HADR_1 */ + IMX_PIN_REG(MX6Q_PAD_KEY_ROW1, 0x05D4, 0x0204, 0, 0x0800, 2), /* MX6Q_PAD_KEY_ROW1__ECSPI1_SS0 */ + IMX_PIN_REG(MX6Q_PAD_KEY_ROW1, 0x05D4, 0x0204, 1, 0x0000, 0), /* MX6Q_PAD_KEY_ROW1__ENET_COL */ + IMX_PIN_REG(MX6Q_PAD_KEY_ROW1, 0x05D4, 0x0204, 2, 0x07CC, 1), /* MX6Q_PAD_KEY_ROW1__AUDMUX_AUD5_RXD */ + IMX_PIN_REG(MX6Q_PAD_KEY_ROW1, 0x05D4, 0x0204, 3, 0x0000, 0), /* MX6Q_PAD_KEY_ROW1__KPP_ROW_1 */ + IMX_PIN_REG(MX6Q_PAD_KEY_ROW1, 0x05D4, 0x0204, 4, 0x0940, 1), /* MX6Q_PAD_KEY_ROW1__UART5_RXD */ + IMX_PIN_REG(MX6Q_PAD_KEY_ROW1, 0x05D4, 0x0204, 5, 0x0000, 0), /* MX6Q_PAD_KEY_ROW1__GPIO_4_9 */ + IMX_PIN_REG(MX6Q_PAD_KEY_ROW1, 0x05D4, 0x0204, 6, 0x0000, 0), /* MX6Q_PAD_KEY_ROW1__USDHC2_VSELECT */ + IMX_PIN_REG(MX6Q_PAD_KEY_ROW1, 0x05D4, 0x0204, 7, 0x0000, 0), /* MX6Q_PAD_KEY_ROW1__PL301_PER1_HADDR_2 */ + IMX_PIN_REG(MX6Q_PAD_KEY_COL2, 0x05D8, 0x0208, 0, 0x0804, 2), /* MX6Q_PAD_KEY_COL2__ECSPI1_SS1 */ + IMX_PIN_REG(MX6Q_PAD_KEY_COL2, 0x05D8, 0x0208, 1, 0x0850, 1), /* MX6Q_PAD_KEY_COL2__ENET_RDATA_2 */ + IMX_PIN_REG(MX6Q_PAD_KEY_COL2, 0x05D8, 0x0208, 2, 0x0000, 0), /* MX6Q_PAD_KEY_COL2__CAN1_TXCAN */ + IMX_PIN_REG(MX6Q_PAD_KEY_COL2, 0x05D8, 0x0208, 3, 0x0000, 0), /* MX6Q_PAD_KEY_COL2__KPP_COL_2 */ + IMX_PIN_REG(MX6Q_PAD_KEY_COL2, 0x05D8, 0x0208, 4, 0x0000, 0), /* MX6Q_PAD_KEY_COL2__ENET_MDC */ + IMX_PIN_REG(MX6Q_PAD_KEY_COL2, 0x05D8, 0x0208, 5, 0x0000, 0), /* MX6Q_PAD_KEY_COL2__GPIO_4_10 */ + IMX_PIN_REG(MX6Q_PAD_KEY_COL2, 0x05D8, 0x0208, 6, 0x0000, 0), /* MX6Q_PAD_KEY_COL2__USBOH3_H1_PWRCTL_WKP */ + IMX_PIN_REG(MX6Q_PAD_KEY_COL2, 0x05D8, 0x0208, 7, 0x0000, 0), /* MX6Q_PAD_KEY_COL2__PL301_PER1_HADDR_3 */ + IMX_PIN_REG(MX6Q_PAD_KEY_ROW2, 0x05DC, 0x020C, 0, 0x0808, 1), /* MX6Q_PAD_KEY_ROW2__ECSPI1_SS2 */ + IMX_PIN_REG(MX6Q_PAD_KEY_ROW2, 0x05DC, 0x020C, 1, 0x0000, 0), /* MX6Q_PAD_KEY_ROW2__ENET_TDATA_2 */ + IMX_PIN_REG(MX6Q_PAD_KEY_ROW2, 0x05DC, 0x020C, 2, 0x07E4, 0), /* MX6Q_PAD_KEY_ROW2__CAN1_RXCAN */ + IMX_PIN_REG(MX6Q_PAD_KEY_ROW2, 0x05DC, 0x020C, 3, 0x0000, 0), /* MX6Q_PAD_KEY_ROW2__KPP_ROW_2 */ + IMX_PIN_REG(MX6Q_PAD_KEY_ROW2, 0x05DC, 0x020C, 4, 0x0000, 0), /* MX6Q_PAD_KEY_ROW2__USDHC2_VSELECT */ + IMX_PIN_REG(MX6Q_PAD_KEY_ROW2, 0x05DC, 0x020C, 5, 0x0000, 0), /* MX6Q_PAD_KEY_ROW2__GPIO_4_11 */ + IMX_PIN_REG(MX6Q_PAD_KEY_ROW2, 0x05DC, 0x020C, 6, 0x088C, 1), /* MX6Q_PAD_KEY_ROW2__HDMI_TX_CEC_LINE */ + IMX_PIN_REG(MX6Q_PAD_KEY_ROW2, 0x05DC, 0x020C, 7, 0x0000, 0), /* MX6Q_PAD_KEY_ROW2__PL301_PER1_HADR_4 */ + IMX_PIN_REG(MX6Q_PAD_KEY_COL3, 0x05E0, 0x0210, 0, 0x080C, 1), /* MX6Q_PAD_KEY_COL3__ECSPI1_SS3 */ + IMX_PIN_REG(MX6Q_PAD_KEY_COL3, 0x05E0, 0x0210, 1, 0x0000, 0), /* MX6Q_PAD_KEY_COL3__ENET_CRS */ + IMX_PIN_REG(MX6Q_PAD_KEY_COL3, 0x05E0, 0x0210, 2, 0x0890, 1), /* MX6Q_PAD_KEY_COL3__HDMI_TX_DDC_SCL */ + IMX_PIN_REG(MX6Q_PAD_KEY_COL3, 0x05E0, 0x0210, 3, 0x0000, 0), /* MX6Q_PAD_KEY_COL3__KPP_COL_3 */ + IMX_PIN_REG(MX6Q_PAD_KEY_COL3, 0x05E0, 0x0210, 4, 0x08A0, 1), /* MX6Q_PAD_KEY_COL3__I2C2_SCL */ + IMX_PIN_REG(MX6Q_PAD_KEY_COL3, 0x05E0, 0x0210, 5, 0x0000, 0), /* MX6Q_PAD_KEY_COL3__GPIO_4_12 */ + IMX_PIN_REG(MX6Q_PAD_KEY_COL3, 0x05E0, 0x0210, 6, 0x0914, 2), /* MX6Q_PAD_KEY_COL3__SPDIF_IN1 */ + IMX_PIN_REG(MX6Q_PAD_KEY_COL3, 0x05E0, 0x0210, 7, 0x0000, 0), /* MX6Q_PAD_KEY_COL3__PL301_PER1_HADR_5 */ + IMX_PIN_REG(MX6Q_PAD_KEY_ROW3, 0x05E4, 0x0214, 0, 0x0000, 0), /* MX6Q_PAD_KEY_ROW3__OSC32K_32K_OUT */ + IMX_PIN_REG(MX6Q_PAD_KEY_ROW3, 0x05E4, 0x0214, 1, 0x07B0, 0), /* MX6Q_PAD_KEY_ROW3__ASRC_ASRC_EXT_CLK */ + IMX_PIN_REG(MX6Q_PAD_KEY_ROW3, 0x05E4, 0x0214, 2, 0x0894, 1), /* MX6Q_PAD_KEY_ROW3__HDMI_TX_DDC_SDA */ + IMX_PIN_REG(MX6Q_PAD_KEY_ROW3, 0x05E4, 0x0214, 3, 0x0000, 0), /* MX6Q_PAD_KEY_ROW3__KPP_ROW_3 */ + IMX_PIN_REG(MX6Q_PAD_KEY_ROW3, 0x05E4, 0x0214, 4, 0x08A4, 1), /* MX6Q_PAD_KEY_ROW3__I2C2_SDA */ + IMX_PIN_REG(MX6Q_PAD_KEY_ROW3, 0x05E4, 0x0214, 5, 0x0000, 0), /* MX6Q_PAD_KEY_ROW3__GPIO_4_13 */ + IMX_PIN_REG(MX6Q_PAD_KEY_ROW3, 0x05E4, 0x0214, 6, 0x0000, 0), /* MX6Q_PAD_KEY_ROW3__USDHC1_VSELECT */ + IMX_PIN_REG(MX6Q_PAD_KEY_ROW3, 0x05E4, 0x0214, 7, 0x0000, 0), /* MX6Q_PAD_KEY_ROW3__PL301_PER1_HADR_6 */ + IMX_PIN_REG(MX6Q_PAD_KEY_COL4, 0x05E8, 0x0218, 0, 0x0000, 0), /* MX6Q_PAD_KEY_COL4__CAN2_TXCAN */ + IMX_PIN_REG(MX6Q_PAD_KEY_COL4, 0x05E8, 0x0218, 1, 0x0000, 0), /* MX6Q_PAD_KEY_COL4__IPU1_SISG_4 */ + IMX_PIN_REG(MX6Q_PAD_KEY_COL4, 0x05E8, 0x0218, 2, 0x0944, 1), /* MX6Q_PAD_KEY_COL4__USBOH3_USBOTG_OC */ + IMX_PIN_REG(MX6Q_PAD_KEY_COL4, 0x05E8, 0x0218, 3, 0x0000, 0), /* MX6Q_PAD_KEY_COL4__KPP_COL_4 */ + IMX_PIN_REG(MX6Q_PAD_KEY_COL4, 0x05E8, 0x0218, 4, 0x093C, 0), /* MX6Q_PAD_KEY_COL4__UART5_RTS */ + IMX_PIN_REG(MX6Q_PAD_KEY_COL4, 0x05E8, 0x0218, 5, 0x0000, 0), /* MX6Q_PAD_KEY_COL4__GPIO_4_14 */ + IMX_PIN_REG(MX6Q_PAD_KEY_COL4, 0x05E8, 0x0218, 6, 0x0000, 0), /* MX6Q_PAD_KEY_COL4__MMDC_DEBUG_49 */ + IMX_PIN_REG(MX6Q_PAD_KEY_COL4, 0x05E8, 0x0218, 7, 0x0000, 0), /* MX6Q_PAD_KEY_COL4__PL301_PER1_HADDR_7 */ + IMX_PIN_REG(MX6Q_PAD_KEY_ROW4, 0x05EC, 0x021C, 0, 0x07E8, 0), /* MX6Q_PAD_KEY_ROW4__CAN2_RXCAN */ + IMX_PIN_REG(MX6Q_PAD_KEY_ROW4, 0x05EC, 0x021C, 1, 0x0000, 0), /* MX6Q_PAD_KEY_ROW4__IPU1_SISG_5 */ + IMX_PIN_REG(MX6Q_PAD_KEY_ROW4, 0x05EC, 0x021C, 2, 0x0000, 0), /* MX6Q_PAD_KEY_ROW4__USBOH3_USBOTG_PWR */ + IMX_PIN_REG(MX6Q_PAD_KEY_ROW4, 0x05EC, 0x021C, 3, 0x0000, 0), /* MX6Q_PAD_KEY_ROW4__KPP_ROW_4 */ + IMX_PIN_REG(MX6Q_PAD_KEY_ROW4, 0x05EC, 0x021C, 4, 0x093C, 1), /* MX6Q_PAD_KEY_ROW4__UART5_CTS */ + IMX_PIN_REG(MX6Q_PAD_KEY_ROW4, 0x05EC, 0x021C, 5, 0x0000, 0), /* MX6Q_PAD_KEY_ROW4__GPIO_4_15 */ + IMX_PIN_REG(MX6Q_PAD_KEY_ROW4, 0x05EC, 0x021C, 6, 0x0000, 0), /* MX6Q_PAD_KEY_ROW4__MMDC_DEBUG_50 */ + IMX_PIN_REG(MX6Q_PAD_KEY_ROW4, 0x05EC, 0x021C, 7, 0x0000, 0), /* MX6Q_PAD_KEY_ROW4__PL301_PER1_HADR_8 */ + IMX_PIN_REG(MX6Q_PAD_GPIO_0, 0x05F0, 0x0220, 0, 0x0000, 0), /* MX6Q_PAD_GPIO_0__CCM_CLKO */ + IMX_PIN_REG(MX6Q_PAD_GPIO_0, 0x05F0, 0x0220, 2, 0x08E8, 0), /* MX6Q_PAD_GPIO_0__KPP_COL_5 */ + IMX_PIN_REG(MX6Q_PAD_GPIO_0, 0x05F0, 0x0220, 3, 0x07B0, 1), /* MX6Q_PAD_GPIO_0__ASRC_ASRC_EXT_CLK */ + IMX_PIN_REG(MX6Q_PAD_GPIO_0, 0x05F0, 0x0220, 4, 0x0000, 0), /* MX6Q_PAD_GPIO_0__EPIT1_EPITO */ + IMX_PIN_REG(MX6Q_PAD_GPIO_0, 0x05F0, 0x0220, 5, 0x0000, 0), /* MX6Q_PAD_GPIO_0__GPIO_1_0 */ + IMX_PIN_REG(MX6Q_PAD_GPIO_0, 0x05F0, 0x0220, 6, 0x0000, 0), /* MX6Q_PAD_GPIO_0__USBOH3_USBH1_PWR */ + IMX_PIN_REG(MX6Q_PAD_GPIO_0, 0x05F0, 0x0220, 7, 0x0000, 0), /* MX6Q_PAD_GPIO_0__SNVS_HP_WRAP_SNVS_VIO5 */ + IMX_PIN_REG(MX6Q_PAD_GPIO_1, 0x05F4, 0x0224, 0, 0x086C, 1), /* MX6Q_PAD_GPIO_1__ESAI1_SCKR */ + IMX_PIN_REG(MX6Q_PAD_GPIO_1, 0x05F4, 0x0224, 1, 0x0000, 0), /* MX6Q_PAD_GPIO_1__WDOG2_WDOG_B */ + IMX_PIN_REG(MX6Q_PAD_GPIO_1, 0x05F4, 0x0224, 2, 0x08F4, 0), /* MX6Q_PAD_GPIO_1__KPP_ROW_5 */ + IMX_PIN_REG(MX6Q_PAD_GPIO_1, 0x05F4, 0x0224, 4, 0x0000, 0), /* MX6Q_PAD_GPIO_1__PWM2_PWMO */ + IMX_PIN_REG(MX6Q_PAD_GPIO_1, 0x05F4, 0x0224, 5, 0x0000, 0), /* MX6Q_PAD_GPIO_1__GPIO_1_1 */ + IMX_PIN_REG(MX6Q_PAD_GPIO_1, 0x05F4, 0x0224, 6, 0x0000, 0), /* MX6Q_PAD_GPIO_1__USDHC1_CD */ + IMX_PIN_REG(MX6Q_PAD_GPIO_1, 0x05F4, 0x0224, 7, 0x0000, 0), /* MX6Q_PAD_GPIO_1__SRC_TESTER_ACK */ + IMX_PIN_REG(MX6Q_PAD_GPIO_9, 0x05F8, 0x0228, 0, 0x085C, 1), /* MX6Q_PAD_GPIO_9__ESAI1_FSR */ + IMX_PIN_REG(MX6Q_PAD_GPIO_9, 0x05F8, 0x0228, 1, 0x0000, 0), /* MX6Q_PAD_GPIO_9__WDOG1_WDOG_B */ + IMX_PIN_REG(MX6Q_PAD_GPIO_9, 0x05F8, 0x0228, 2, 0x08EC, 0), /* MX6Q_PAD_GPIO_9__KPP_COL_6 */ + IMX_PIN_REG(MX6Q_PAD_GPIO_9, 0x05F8, 0x0228, 3, 0x0000, 0), /* MX6Q_PAD_GPIO_9__CCM_REF_EN_B */ + IMX_PIN_REG(MX6Q_PAD_GPIO_9, 0x05F8, 0x0228, 4, 0x0000, 0), /* MX6Q_PAD_GPIO_9__PWM1_PWMO */ + IMX_PIN_REG(MX6Q_PAD_GPIO_9, 0x05F8, 0x0228, 5, 0x0000, 0), /* MX6Q_PAD_GPIO_9__GPIO_1_9 */ + IMX_PIN_REG(MX6Q_PAD_GPIO_9, 0x05F8, 0x0228, 6, 0x094C, 1), /* MX6Q_PAD_GPIO_9__USDHC1_WP */ + IMX_PIN_REG(MX6Q_PAD_GPIO_9, 0x05F8, 0x0228, 7, 0x0000, 0), /* MX6Q_PAD_GPIO_9__SRC_EARLY_RST */ + IMX_PIN_REG(MX6Q_PAD_GPIO_3, 0x05FC, 0x022C, 0, 0x0864, 1), /* MX6Q_PAD_GPIO_3__ESAI1_HCKR */ + IMX_PIN_REG(MX6Q_PAD_GPIO_3, 0x05FC, 0x022C, 1, 0x0000, 0), /* MX6Q_PAD_GPIO_3__OBSERVE_MUX_INT_OUT0 */ + IMX_PIN_REG(MX6Q_PAD_GPIO_3, 0x05FC, 0x022C, 2, 0x08A8, 1), /* MX6Q_PAD_GPIO_3__I2C3_SCL */ + IMX_PIN_REG(MX6Q_PAD_GPIO_3, 0x05FC, 0x022C, 3, 0x0000, 0), /* MX6Q_PAD_GPIO_3__ANATOP_24M_OUT */ + IMX_PIN_REG(MX6Q_PAD_GPIO_3, 0x05FC, 0x022C, 4, 0x0000, 0), /* MX6Q_PAD_GPIO_3__CCM_CLKO2 */ + IMX_PIN_REG(MX6Q_PAD_GPIO_3, 0x05FC, 0x022C, 5, 0x0000, 0), /* MX6Q_PAD_GPIO_3__GPIO_1_3 */ + IMX_PIN_REG(MX6Q_PAD_GPIO_3, 0x05FC, 0x022C, 6, 0x0948, 1), /* MX6Q_PAD_GPIO_3__USBOH3_USBH1_OC */ + IMX_PIN_REG(MX6Q_PAD_GPIO_3, 0x05FC, 0x022C, 7, 0x0900, 1), /* MX6Q_PAD_GPIO_3__MLB_MLBCLK */ + IMX_PIN_REG(MX6Q_PAD_GPIO_6, 0x0600, 0x0230, 0, 0x0870, 1), /* MX6Q_PAD_GPIO_6__ESAI1_SCKT */ + IMX_PIN_REG(MX6Q_PAD_GPIO_6, 0x0600, 0x0230, 1, 0x0000, 0), /* MX6Q_PAD_GPIO_6__OBSERVE_MUX_INT_OUT1 */ + IMX_PIN_REG(MX6Q_PAD_GPIO_6, 0x0600, 0x0230, 2, 0x08AC, 1), /* MX6Q_PAD_GPIO_6__I2C3_SDA */ + IMX_PIN_REG(MX6Q_PAD_GPIO_6, 0x0600, 0x0230, 3, 0x0000, 0), /* MX6Q_PAD_GPIO_6__CCM_CCM_OUT_0 */ + IMX_PIN_REG(MX6Q_PAD_GPIO_6, 0x0600, 0x0230, 4, 0x0000, 0), /* MX6Q_PAD_GPIO_6__CSU_CSU_INT_DEB */ + IMX_PIN_REG(MX6Q_PAD_GPIO_6, 0x0600, 0x0230, 5, 0x0000, 0), /* MX6Q_PAD_GPIO_6__GPIO_1_6 */ + IMX_PIN_REG(MX6Q_PAD_GPIO_6, 0x0600, 0x0230, 6, 0x0000, 0), /* MX6Q_PAD_GPIO_6__USDHC2_LCTL */ + IMX_PIN_REG(MX6Q_PAD_GPIO_6, 0x0600, 0x0230, 7, 0x0908, 1), /* MX6Q_PAD_GPIO_6__MLB_MLBSIG */ + IMX_PIN_REG(MX6Q_PAD_GPIO_2, 0x0604, 0x0234, 0, 0x0860, 1), /* MX6Q_PAD_GPIO_2__ESAI1_FST */ + IMX_PIN_REG(MX6Q_PAD_GPIO_2, 0x0604, 0x0234, 1, 0x0000, 0), /* MX6Q_PAD_GPIO_2__OBSERVE_MUX_INT_OUT2 */ + IMX_PIN_REG(MX6Q_PAD_GPIO_2, 0x0604, 0x0234, 2, 0x08F8, 1), /* MX6Q_PAD_GPIO_2__KPP_ROW_6 */ + IMX_PIN_REG(MX6Q_PAD_GPIO_2, 0x0604, 0x0234, 3, 0x0000, 0), /* MX6Q_PAD_GPIO_2__CCM_CCM_OUT_1 */ + IMX_PIN_REG(MX6Q_PAD_GPIO_2, 0x0604, 0x0234, 4, 0x0000, 0), /* MX6Q_PAD_GPIO_2__CSU_CSU_ALARM_AUT_0 */ + IMX_PIN_REG(MX6Q_PAD_GPIO_2, 0x0604, 0x0234, 5, 0x0000, 0), /* MX6Q_PAD_GPIO_2__GPIO_1_2 */ + IMX_PIN_REG(MX6Q_PAD_GPIO_2, 0x0604, 0x0234, 6, 0x0000, 0), /* MX6Q_PAD_GPIO_2__USDHC2_WP */ + IMX_PIN_REG(MX6Q_PAD_GPIO_2, 0x0604, 0x0234, 7, 0x0904, 1), /* MX6Q_PAD_GPIO_2__MLB_MLBDAT */ + IMX_PIN_REG(MX6Q_PAD_GPIO_4, 0x0608, 0x0238, 0, 0x0868, 1), /* MX6Q_PAD_GPIO_4__ESAI1_HCKT */ + IMX_PIN_REG(MX6Q_PAD_GPIO_4, 0x0608, 0x0238, 1, 0x0000, 0), /* MX6Q_PAD_GPIO_4__OBSERVE_MUX_INT_OUT3 */ + IMX_PIN_REG(MX6Q_PAD_GPIO_4, 0x0608, 0x0238, 2, 0x08F0, 1), /* MX6Q_PAD_GPIO_4__KPP_COL_7 */ + IMX_PIN_REG(MX6Q_PAD_GPIO_4, 0x0608, 0x0238, 3, 0x0000, 0), /* MX6Q_PAD_GPIO_4__CCM_CCM_OUT_2 */ + IMX_PIN_REG(MX6Q_PAD_GPIO_4, 0x0608, 0x0238, 4, 0x0000, 0), /* MX6Q_PAD_GPIO_4__CSU_CSU_ALARM_AUT_1 */ + IMX_PIN_REG(MX6Q_PAD_GPIO_4, 0x0608, 0x0238, 5, 0x0000, 0), /* MX6Q_PAD_GPIO_4__GPIO_1_4 */ + IMX_PIN_REG(MX6Q_PAD_GPIO_4, 0x0608, 0x0238, 6, 0x0000, 0), /* MX6Q_PAD_GPIO_4__USDHC2_CD */ + IMX_PIN_REG(MX6Q_PAD_GPIO_4, 0x0608, 0x0238, 7, 0x0000, 0), /* MX6Q_PAD_GPIO_4__OCOTP_CRL_WRAR_FUSE_LA */ + IMX_PIN_REG(MX6Q_PAD_GPIO_5, 0x060C, 0x023C, 0, 0x087C, 1), /* MX6Q_PAD_GPIO_5__ESAI1_TX2_RX3 */ + IMX_PIN_REG(MX6Q_PAD_GPIO_5, 0x060C, 0x023C, 1, 0x0000, 0), /* MX6Q_PAD_GPIO_5__OBSERVE_MUX_INT_OUT4 */ + IMX_PIN_REG(MX6Q_PAD_GPIO_5, 0x060C, 0x023C, 2, 0x08FC, 1), /* MX6Q_PAD_GPIO_5__KPP_ROW_7 */ + IMX_PIN_REG(MX6Q_PAD_GPIO_5, 0x060C, 0x023C, 3, 0x0000, 0), /* MX6Q_PAD_GPIO_5__CCM_CLKO */ + IMX_PIN_REG(MX6Q_PAD_GPIO_5, 0x060C, 0x023C, 4, 0x0000, 0), /* MX6Q_PAD_GPIO_5__CSU_CSU_ALARM_AUT_2 */ + IMX_PIN_REG(MX6Q_PAD_GPIO_5, 0x060C, 0x023C, 5, 0x0000, 0), /* MX6Q_PAD_GPIO_5__GPIO_1_5 */ + IMX_PIN_REG(MX6Q_PAD_GPIO_5, 0x060C, 0x023C, 6, 0x08A8, 2), /* MX6Q_PAD_GPIO_5__I2C3_SCL */ + IMX_PIN_REG(MX6Q_PAD_GPIO_5, 0x060C, 0x023C, 7, 0x0000, 0), /* MX6Q_PAD_GPIO_5__CHEETAH_EVENTI */ + IMX_PIN_REG(MX6Q_PAD_GPIO_7, 0x0610, 0x0240, 0, 0x0884, 1), /* MX6Q_PAD_GPIO_7__ESAI1_TX4_RX1 */ + IMX_PIN_REG(MX6Q_PAD_GPIO_7, 0x0610, 0x0240, 1, 0x0000, 0), /* MX6Q_PAD_GPIO_7__ECSPI5_RDY */ + IMX_PIN_REG(MX6Q_PAD_GPIO_7, 0x0610, 0x0240, 2, 0x0000, 0), /* MX6Q_PAD_GPIO_7__EPIT1_EPITO */ + IMX_PIN_REG(MX6Q_PAD_GPIO_7, 0x0610, 0x0240, 3, 0x0000, 0), /* MX6Q_PAD_GPIO_7__CAN1_TXCAN */ + IMX_PIN_REG(MX6Q_PAD_GPIO_7, 0x0610, 0x0240, 4, 0x0000, 0), /* MX6Q_PAD_GPIO_7__UART2_TXD */ + IMX_PIN_REG(MX6Q_PAD_GPIO_7, 0x0610, 0x0240, 5, 0x0000, 0), /* MX6Q_PAD_GPIO_7__GPIO_1_7 */ + IMX_PIN_REG(MX6Q_PAD_GPIO_7, 0x0610, 0x0240, 6, 0x0000, 0), /* MX6Q_PAD_GPIO_7__SPDIF_PLOCK */ + IMX_PIN_REG(MX6Q_PAD_GPIO_7, 0x0610, 0x0240, 7, 0x0000, 0), /* MX6Q_PAD_GPIO_7__USBOH3_OTGUSB_HST_MODE */ + IMX_PIN_REG(MX6Q_PAD_GPIO_8, 0x0614, 0x0244, 0, 0x0888, 1), /* MX6Q_PAD_GPIO_8__ESAI1_TX5_RX0 */ + IMX_PIN_REG(MX6Q_PAD_GPIO_8, 0x0614, 0x0244, 1, 0x0000, 0), /* MX6Q_PAD_GPIO_8__ANATOP_ANATOP_32K_OUT */ + IMX_PIN_REG(MX6Q_PAD_GPIO_8, 0x0614, 0x0244, 2, 0x0000, 0), /* MX6Q_PAD_GPIO_8__EPIT2_EPITO */ + IMX_PIN_REG(MX6Q_PAD_GPIO_8, 0x0614, 0x0244, 3, 0x07E4, 1), /* MX6Q_PAD_GPIO_8__CAN1_RXCAN */ + IMX_PIN_REG(MX6Q_PAD_GPIO_8, 0x0614, 0x0244, 4, 0x0928, 3), /* MX6Q_PAD_GPIO_8__UART2_RXD */ + IMX_PIN_REG(MX6Q_PAD_GPIO_8, 0x0614, 0x0244, 5, 0x0000, 0), /* MX6Q_PAD_GPIO_8__GPIO_1_8 */ + IMX_PIN_REG(MX6Q_PAD_GPIO_8, 0x0614, 0x0244, 6, 0x0000, 0), /* MX6Q_PAD_GPIO_8__SPDIF_SRCLK */ + IMX_PIN_REG(MX6Q_PAD_GPIO_8, 0x0614, 0x0244, 7, 0x0000, 0), /* MX6Q_PAD_GPIO_8__USBOH3_OTG_PWRCTL_WAK */ + IMX_PIN_REG(MX6Q_PAD_GPIO_16, 0x0618, 0x0248, 0, 0x0880, 1), /* MX6Q_PAD_GPIO_16__ESAI1_TX3_RX2 */ + IMX_PIN_REG(MX6Q_PAD_GPIO_16, 0x0618, 0x0248, 1, 0x0000, 0), /* MX6Q_PAD_GPIO_16__ENET_1588_EVENT2_IN */ + IMX_PIN_REG(MX6Q_PAD_GPIO_16, 0x0618, 0x0248, 2, 0x083C, 1), /* MX6Q_PAD_GPIO_16__ENET_ETHERNET_REF_OUT */ + IMX_PIN_REG(MX6Q_PAD_GPIO_16, 0x0618, 0x0248, 3, 0x0000, 0), /* MX6Q_PAD_GPIO_16__USDHC1_LCTL */ + IMX_PIN_REG(MX6Q_PAD_GPIO_16, 0x0618, 0x0248, 4, 0x0914, 3), /* MX6Q_PAD_GPIO_16__SPDIF_IN1 */ + IMX_PIN_REG(MX6Q_PAD_GPIO_16, 0x0618, 0x0248, 5, 0x0000, 0), /* MX6Q_PAD_GPIO_16__GPIO_7_11 */ + IMX_PIN_REG(MX6Q_PAD_GPIO_16, 0x0618, 0x0248, 6, 0x08AC, 2), /* MX6Q_PAD_GPIO_16__I2C3_SDA */ + IMX_PIN_REG(MX6Q_PAD_GPIO_16, 0x0618, 0x0248, 7, 0x0000, 0), /* MX6Q_PAD_GPIO_16__SJC_DE_B */ + IMX_PIN_REG(MX6Q_PAD_GPIO_17, 0x061C, 0x024C, 0, 0x0874, 0), /* MX6Q_PAD_GPIO_17__ESAI1_TX0 */ + IMX_PIN_REG(MX6Q_PAD_GPIO_17, 0x061C, 0x024C, 1, 0x0000, 0), /* MX6Q_PAD_GPIO_17__ENET_1588_EVENT3_IN */ + IMX_PIN_REG(MX6Q_PAD_GPIO_17, 0x061C, 0x024C, 2, 0x07F0, 1), /* MX6Q_PAD_GPIO_17__CCM_PMIC_RDY */ + IMX_PIN_REG(MX6Q_PAD_GPIO_17, 0x061C, 0x024C, 3, 0x090C, 1), /* MX6Q_PAD_GPIO_17__SDMA_SDMA_EXT_EVENT_0 */ + IMX_PIN_REG(MX6Q_PAD_GPIO_17, 0x061C, 0x024C, 4, 0x0000, 0), /* MX6Q_PAD_GPIO_17__SPDIF_OUT1 */ + IMX_PIN_REG(MX6Q_PAD_GPIO_17, 0x061C, 0x024C, 5, 0x0000, 0), /* MX6Q_PAD_GPIO_17__GPIO_7_12 */ + IMX_PIN_REG(MX6Q_PAD_GPIO_17, 0x061C, 0x024C, 7, 0x0000, 0), /* MX6Q_PAD_GPIO_17__SJC_JTAG_ACT */ + IMX_PIN_REG(MX6Q_PAD_GPIO_18, 0x0620, 0x0250, 0, 0x0878, 0), /* MX6Q_PAD_GPIO_18__ESAI1_TX1 */ + IMX_PIN_REG(MX6Q_PAD_GPIO_18, 0x0620, 0x0250, 1, 0x0844, 1), /* MX6Q_PAD_GPIO_18__ENET_RX_CLK */ + IMX_PIN_REG(MX6Q_PAD_GPIO_18, 0x0620, 0x0250, 2, 0x0000, 0), /* MX6Q_PAD_GPIO_18__USDHC3_VSELECT */ + IMX_PIN_REG(MX6Q_PAD_GPIO_18, 0x0620, 0x0250, 3, 0x0910, 1), /* MX6Q_PAD_GPIO_18__SDMA_SDMA_EXT_EVENT_1 */ + IMX_PIN_REG(MX6Q_PAD_GPIO_18, 0x0620, 0x0250, 4, 0x07B0, 2), /* MX6Q_PAD_GPIO_18__ASRC_ASRC_EXT_CLK */ + IMX_PIN_REG(MX6Q_PAD_GPIO_18, 0x0620, 0x0250, 5, 0x0000, 0), /* MX6Q_PAD_GPIO_18__GPIO_7_13 */ + IMX_PIN_REG(MX6Q_PAD_GPIO_18, 0x0620, 0x0250, 6, 0x0000, 0), /* MX6Q_PAD_GPIO_18__SNVS_HP_WRA_SNVS_VIO5 */ + IMX_PIN_REG(MX6Q_PAD_GPIO_18, 0x0620, 0x0250, 7, 0x0000, 0), /* MX6Q_PAD_GPIO_18__SRC_SYSTEM_RST */ + IMX_PIN_REG(MX6Q_PAD_GPIO_19, 0x0624, 0x0254, 0, 0x08E8, 1), /* MX6Q_PAD_GPIO_19__KPP_COL_5 */ + IMX_PIN_REG(MX6Q_PAD_GPIO_19, 0x0624, 0x0254, 1, 0x0000, 0), /* MX6Q_PAD_GPIO_19__ENET_1588_EVENT0_OUT */ + IMX_PIN_REG(MX6Q_PAD_GPIO_19, 0x0624, 0x0254, 2, 0x0000, 0), /* MX6Q_PAD_GPIO_19__SPDIF_OUT1 */ + IMX_PIN_REG(MX6Q_PAD_GPIO_19, 0x0624, 0x0254, 3, 0x0000, 0), /* MX6Q_PAD_GPIO_19__CCM_CLKO */ + IMX_PIN_REG(MX6Q_PAD_GPIO_19, 0x0624, 0x0254, 4, 0x0000, 0), /* MX6Q_PAD_GPIO_19__ECSPI1_RDY */ + IMX_PIN_REG(MX6Q_PAD_GPIO_19, 0x0624, 0x0254, 5, 0x0000, 0), /* MX6Q_PAD_GPIO_19__GPIO_4_5 */ + IMX_PIN_REG(MX6Q_PAD_GPIO_19, 0x0624, 0x0254, 6, 0x0000, 0), /* MX6Q_PAD_GPIO_19__ENET_TX_ER */ + IMX_PIN_REG(MX6Q_PAD_GPIO_19, 0x0624, 0x0254, 7, 0x0000, 0), /* MX6Q_PAD_GPIO_19__SRC_INT_BOOT */ + IMX_PIN_REG(MX6Q_PAD_CSI0_PIXCLK, 0x0628, 0x0258, 0, 0x0000, 0), /* MX6Q_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK */ + IMX_PIN_REG(MX6Q_PAD_CSI0_PIXCLK, 0x0628, 0x0258, 2, 0x0000, 0), /* MX6Q_PAD_CSI0_PIXCLK__PCIE_CTRL_MUX_12 */ + IMX_PIN_REG(MX6Q_PAD_CSI0_PIXCLK, 0x0628, 0x0258, 4, 0x0000, 0), /* MX6Q_PAD_CSI0_PIXCLK__SDMA_DEBUG_PC_0 */ + IMX_PIN_REG(MX6Q_PAD_CSI0_PIXCLK, 0x0628, 0x0258, 5, 0x0000, 0), /* MX6Q_PAD_CSI0_PIXCLK__GPIO_5_18 */ + IMX_PIN_REG(MX6Q_PAD_CSI0_PIXCLK, 0x0628, 0x0258, 6, 0x0000, 0), /* MX6Q_PAD_CSI0_PIXCLK___MMDC_DEBUG_29 */ + IMX_PIN_REG(MX6Q_PAD_CSI0_PIXCLK, 0x0628, 0x0258, 7, 0x0000, 0), /* MX6Q_PAD_CSI0_PIXCLK__CHEETAH_EVENTO */ + IMX_PIN_REG(MX6Q_PAD_CSI0_MCLK, 0x062C, 0x025C, 0, 0x0000, 0), /* MX6Q_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC */ + IMX_PIN_REG(MX6Q_PAD_CSI0_MCLK, 0x062C, 0x025C, 2, 0x0000, 0), /* MX6Q_PAD_CSI0_MCLK__PCIE_CTRL_MUX_13 */ + IMX_PIN_REG(MX6Q_PAD_CSI0_MCLK, 0x062C, 0x025C, 3, 0x0000, 0), /* MX6Q_PAD_CSI0_MCLK__CCM_CLKO */ + IMX_PIN_REG(MX6Q_PAD_CSI0_MCLK, 0x062C, 0x025C, 4, 0x0000, 0), /* MX6Q_PAD_CSI0_MCLK__SDMA_DEBUG_PC_1 */ + IMX_PIN_REG(MX6Q_PAD_CSI0_MCLK, 0x062C, 0x025C, 5, 0x0000, 0), /* MX6Q_PAD_CSI0_MCLK__GPIO_5_19 */ + IMX_PIN_REG(MX6Q_PAD_CSI0_MCLK, 0x062C, 0x025C, 6, 0x0000, 0), /* MX6Q_PAD_CSI0_MCLK__MMDC_MMDC_DEBUG_30 */ + IMX_PIN_REG(MX6Q_PAD_CSI0_MCLK, 0x062C, 0x025C, 7, 0x0000, 0), /* MX6Q_PAD_CSI0_MCLK__CHEETAH_TRCTL */ + IMX_PIN_REG(MX6Q_PAD_CSI0_DATA_EN, 0x0630, 0x0260, 0, 0x0000, 0), /* MX6Q_PAD_CSI0_DATA_EN__IPU1_CSI0_DA_EN */ + IMX_PIN_REG(MX6Q_PAD_CSI0_DATA_EN, 0x0630, 0x0260, 1, 0x0000, 0), /* MX6Q_PAD_CSI0_DATA_EN__WEIM_WEIM_D_0 */ + IMX_PIN_REG(MX6Q_PAD_CSI0_DATA_EN, 0x0630, 0x0260, 2, 0x0000, 0), /* MX6Q_PAD_CSI0_DATA_EN__PCIE_CTRL_MUX_14 */ + IMX_PIN_REG(MX6Q_PAD_CSI0_DATA_EN, 0x0630, 0x0260, 4, 0x0000, 0), /* MX6Q_PAD_CSI0_DATA_EN__SDMA_DEBUG_PC_2 */ + IMX_PIN_REG(MX6Q_PAD_CSI0_DATA_EN, 0x0630, 0x0260, 5, 0x0000, 0), /* MX6Q_PAD_CSI0_DATA_EN__GPIO_5_20 */ + IMX_PIN_REG(MX6Q_PAD_CSI0_DATA_EN, 0x0630, 0x0260, 6, 0x0000, 0), /* MX6Q_PAD_CSI0_DATA_EN__MMDC_DEBUG_31 */ + IMX_PIN_REG(MX6Q_PAD_CSI0_DATA_EN, 0x0630, 0x0260, 7, 0x0000, 0), /* MX6Q_PAD_CSI0_DATA_EN__CHEETAH_TRCLK */ + IMX_PIN_REG(MX6Q_PAD_CSI0_VSYNC, 0x0634, 0x0264, 0, 0x0000, 0), /* MX6Q_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC */ + IMX_PIN_REG(MX6Q_PAD_CSI0_VSYNC, 0x0634, 0x0264, 1, 0x0000, 0), /* MX6Q_PAD_CSI0_VSYNC__WEIM_WEIM_D_1 */ + IMX_PIN_REG(MX6Q_PAD_CSI0_VSYNC, 0x0634, 0x0264, 2, 0x0000, 0), /* MX6Q_PAD_CSI0_VSYNC__PCIE_CTRL_MUX_15 */ + IMX_PIN_REG(MX6Q_PAD_CSI0_VSYNC, 0x0634, 0x0264, 4, 0x0000, 0), /* MX6Q_PAD_CSI0_VSYNC__SDMA_DEBUG_PC_3 */ + IMX_PIN_REG(MX6Q_PAD_CSI0_VSYNC, 0x0634, 0x0264, 5, 0x0000, 0), /* MX6Q_PAD_CSI0_VSYNC__GPIO_5_21 */ + IMX_PIN_REG(MX6Q_PAD_CSI0_VSYNC, 0x0634, 0x0264, 6, 0x0000, 0), /* MX6Q_PAD_CSI0_VSYNC__MMDC_DEBUG_32 */ + IMX_PIN_REG(MX6Q_PAD_CSI0_VSYNC, 0x0634, 0x0264, 7, 0x0000, 0), /* MX6Q_PAD_CSI0_VSYNC__CHEETAH_TRACE_0 */ + IMX_PIN_REG(MX6Q_PAD_CSI0_DAT4, 0x0638, 0x0268, 0, 0x0000, 0), /* MX6Q_PAD_CSI0_DAT4__IPU1_CSI0_D_4 */ + IMX_PIN_REG(MX6Q_PAD_CSI0_DAT4, 0x0638, 0x0268, 1, 0x0000, 0), /* MX6Q_PAD_CSI0_DAT4__WEIM_WEIM_D_2 */ + IMX_PIN_REG(MX6Q_PAD_CSI0_DAT4, 0x0638, 0x0268, 2, 0x07F4, 3), /* MX6Q_PAD_CSI0_DAT4__ECSPI1_SCLK */ + IMX_PIN_REG(MX6Q_PAD_CSI0_DAT4, 0x0638, 0x0268, 3, 0x08E8, 2), /* MX6Q_PAD_CSI0_DAT4__KPP_COL_5 */ + IMX_PIN_REG(MX6Q_PAD_CSI0_DAT4, 0x0638, 0x0268, 4, 0x0000, 0), /* MX6Q_PAD_CSI0_DAT4__AUDMUX_AUD3_TXC */ + IMX_PIN_REG(MX6Q_PAD_CSI0_DAT4, 0x0638, 0x0268, 5, 0x0000, 0), /* MX6Q_PAD_CSI0_DAT4__GPIO_5_22 */ + IMX_PIN_REG(MX6Q_PAD_CSI0_DAT4, 0x0638, 0x0268, 6, 0x0000, 0), /* MX6Q_PAD_CSI0_DAT4__MMDC_DEBUG_43 */ + IMX_PIN_REG(MX6Q_PAD_CSI0_DAT4, 0x0638, 0x0268, 7, 0x0000, 0), /* MX6Q_PAD_CSI0_DAT4__CHEETAH_TRACE_1 */ + IMX_PIN_REG(MX6Q_PAD_CSI0_DAT5, 0x063C, 0x026C, 0, 0x0000, 0), /* MX6Q_PAD_CSI0_DAT5__IPU1_CSI0_D_5 */ + IMX_PIN_REG(MX6Q_PAD_CSI0_DAT5, 0x063C, 0x026C, 1, 0x0000, 0), /* MX6Q_PAD_CSI0_DAT5__WEIM_WEIM_D_3 */ + IMX_PIN_REG(MX6Q_PAD_CSI0_DAT5, 0x063C, 0x026C, 2, 0x07FC, 3), /* MX6Q_PAD_CSI0_DAT5__ECSPI1_MOSI */ + IMX_PIN_REG(MX6Q_PAD_CSI0_DAT5, 0x063C, 0x026C, 3, 0x08F4, 1), /* MX6Q_PAD_CSI0_DAT5__KPP_ROW_5 */ + IMX_PIN_REG(MX6Q_PAD_CSI0_DAT5, 0x063C, 0x026C, 4, 0x0000, 0), /* MX6Q_PAD_CSI0_DAT5__AUDMUX_AUD3_TXD */ + IMX_PIN_REG(MX6Q_PAD_CSI0_DAT5, 0x063C, 0x026C, 5, 0x0000, 0), /* MX6Q_PAD_CSI0_DAT5__GPIO_5_23 */ + IMX_PIN_REG(MX6Q_PAD_CSI0_DAT5, 0x063C, 0x026C, 6, 0x0000, 0), /* MX6Q_PAD_CSI0_DAT5__MMDC_MMDC_DEBUG_44 */ + IMX_PIN_REG(MX6Q_PAD_CSI0_DAT5, 0x063C, 0x026C, 7, 0x0000, 0), /* MX6Q_PAD_CSI0_DAT5__CHEETAH_TRACE_2 */ + IMX_PIN_REG(MX6Q_PAD_CSI0_DAT6, 0x0640, 0x0270, 0, 0x0000, 0), /* MX6Q_PAD_CSI0_DAT6__IPU1_CSI0_D_6 */ + IMX_PIN_REG(MX6Q_PAD_CSI0_DAT6, 0x0640, 0x0270, 1, 0x0000, 0), /* MX6Q_PAD_CSI0_DAT6__WEIM_WEIM_D_4 */ + IMX_PIN_REG(MX6Q_PAD_CSI0_DAT6, 0x0640, 0x0270, 2, 0x07F8, 3), /* MX6Q_PAD_CSI0_DAT6__ECSPI1_MISO */ + IMX_PIN_REG(MX6Q_PAD_CSI0_DAT6, 0x0640, 0x0270, 3, 0x08EC, 1), /* MX6Q_PAD_CSI0_DAT6__KPP_COL_6 */ + IMX_PIN_REG(MX6Q_PAD_CSI0_DAT6, 0x0640, 0x0270, 4, 0x0000, 0), /* MX6Q_PAD_CSI0_DAT6__AUDMUX_AUD3_TXFS */ + IMX_PIN_REG(MX6Q_PAD_CSI0_DAT6, 0x0640, 0x0270, 5, 0x0000, 0), /* MX6Q_PAD_CSI0_DAT6__GPIO_5_24 */ + IMX_PIN_REG(MX6Q_PAD_CSI0_DAT6, 0x0640, 0x0270, 6, 0x0000, 0), /* MX6Q_PAD_CSI0_DAT6__MMDC_MMDC_DEBUG_45 */ + IMX_PIN_REG(MX6Q_PAD_CSI0_DAT6, 0x0640, 0x0270, 7, 0x0000, 0), /* MX6Q_PAD_CSI0_DAT6__CHEETAH_TRACE_3 */ + IMX_PIN_REG(MX6Q_PAD_CSI0_DAT7, 0x0644, 0x0274, 0, 0x0000, 0), /* MX6Q_PAD_CSI0_DAT7__IPU1_CSI0_D_7 */ + IMX_PIN_REG(MX6Q_PAD_CSI0_DAT7, 0x0644, 0x0274, 1, 0x0000, 0), /* MX6Q_PAD_CSI0_DAT7__WEIM_WEIM_D_5 */ + IMX_PIN_REG(MX6Q_PAD_CSI0_DAT7, 0x0644, 0x0274, 2, 0x0800, 3), /* MX6Q_PAD_CSI0_DAT7__ECSPI1_SS0 */ + IMX_PIN_REG(MX6Q_PAD_CSI0_DAT7, 0x0644, 0x0274, 3, 0x08F8, 2), /* MX6Q_PAD_CSI0_DAT7__KPP_ROW_6 */ + IMX_PIN_REG(MX6Q_PAD_CSI0_DAT7, 0x0644, 0x0274, 4, 0x0000, 0), /* MX6Q_PAD_CSI0_DAT7__AUDMUX_AUD3_RXD */ + IMX_PIN_REG(MX6Q_PAD_CSI0_DAT7, 0x0644, 0x0274, 5, 0x0000, 0), /* MX6Q_PAD_CSI0_DAT7__GPIO_5_25 */ + IMX_PIN_REG(MX6Q_PAD_CSI0_DAT7, 0x0644, 0x0274, 6, 0x0000, 0), /* MX6Q_PAD_CSI0_DAT7__MMDC_MMDC_DEBUG_46 */ + IMX_PIN_REG(MX6Q_PAD_CSI0_DAT7, 0x0644, 0x0274, 7, 0x0000, 0), /* MX6Q_PAD_CSI0_DAT7__CHEETAH_TRACE_4 */ + IMX_PIN_REG(MX6Q_PAD_CSI0_DAT8, 0x0648, 0x0278, 0, 0x0000, 0), /* MX6Q_PAD_CSI0_DAT8__IPU1_CSI0_D_8 */ + IMX_PIN_REG(MX6Q_PAD_CSI0_DAT8, 0x0648, 0x0278, 1, 0x0000, 0), /* MX6Q_PAD_CSI0_DAT8__WEIM_WEIM_D_6 */ + IMX_PIN_REG(MX6Q_PAD_CSI0_DAT8, 0x0648, 0x0278, 2, 0x0810, 2), /* MX6Q_PAD_CSI0_DAT8__ECSPI2_SCLK */ + IMX_PIN_REG(MX6Q_PAD_CSI0_DAT8, 0x0648, 0x0278, 3, 0x08F0, 2), /* MX6Q_PAD_CSI0_DAT8__KPP_COL_7 */ + IMX_PIN_REG(MX6Q_PAD_CSI0_DAT8, 0x0648, 0x0278, 4, 0x089C, 1), /* MX6Q_PAD_CSI0_DAT8__I2C1_SDA */ + IMX_PIN_REG(MX6Q_PAD_CSI0_DAT8, 0x0648, 0x0278, 5, 0x0000, 0), /* MX6Q_PAD_CSI0_DAT8__GPIO_5_26 */ + IMX_PIN_REG(MX6Q_PAD_CSI0_DAT8, 0x0648, 0x0278, 6, 0x0000, 0), /* MX6Q_PAD_CSI0_DAT8__MMDC_MMDC_DEBUG_47 */ + IMX_PIN_REG(MX6Q_PAD_CSI0_DAT8, 0x0648, 0x0278, 7, 0x0000, 0), /* MX6Q_PAD_CSI0_DAT8__CHEETAH_TRACE_5 */ + IMX_PIN_REG(MX6Q_PAD_CSI0_DAT9, 0x064C, 0x027C, 0, 0x0000, 0), /* MX6Q_PAD_CSI0_DAT9__IPU1_CSI0_D_9 */ + IMX_PIN_REG(MX6Q_PAD_CSI0_DAT9, 0x064C, 0x027C, 1, 0x0000, 0), /* MX6Q_PAD_CSI0_DAT9__WEIM_WEIM_D_7 */ + IMX_PIN_REG(MX6Q_PAD_CSI0_DAT9, 0x064C, 0x027C, 2, 0x0818, 2), /* MX6Q_PAD_CSI0_DAT9__ECSPI2_MOSI */ + IMX_PIN_REG(MX6Q_PAD_CSI0_DAT9, 0x064C, 0x027C, 3, 0x08FC, 2), /* MX6Q_PAD_CSI0_DAT9__KPP_ROW_7 */ + IMX_PIN_REG(MX6Q_PAD_CSI0_DAT9, 0x064C, 0x027C, 4, 0x0898, 1), /* MX6Q_PAD_CSI0_DAT9__I2C1_SCL */ + IMX_PIN_REG(MX6Q_PAD_CSI0_DAT9, 0x064C, 0x027C, 5, 0x0000, 0), /* MX6Q_PAD_CSI0_DAT9__GPIO_5_27 */ + IMX_PIN_REG(MX6Q_PAD_CSI0_DAT9, 0x064C, 0x027C, 6, 0x0000, 0), /* MX6Q_PAD_CSI0_DAT9__MMDC_MMDC_DEBUG_48 */ + IMX_PIN_REG(MX6Q_PAD_CSI0_DAT9, 0x064C, 0x027C, 7, 0x0000, 0), /* MX6Q_PAD_CSI0_DAT9__CHEETAH_TRACE_6 */ + IMX_PIN_REG(MX6Q_PAD_CSI0_DAT10, 0x0650, 0x0280, 0, 0x0000, 0), /* MX6Q_PAD_CSI0_DAT10__IPU1_CSI0_D_10 */ + IMX_PIN_REG(MX6Q_PAD_CSI0_DAT10, 0x0650, 0x0280, 1, 0x0000, 0), /* MX6Q_PAD_CSI0_DAT10__AUDMUX_AUD3_RXC */ + IMX_PIN_REG(MX6Q_PAD_CSI0_DAT10, 0x0650, 0x0280, 2, 0x0814, 2), /* MX6Q_PAD_CSI0_DAT10__ECSPI2_MISO */ + IMX_PIN_REG(MX6Q_PAD_CSI0_DAT10, 0x0650, 0x0280, 3, 0x0000, 0), /* MX6Q_PAD_CSI0_DAT10__UART1_TXD */ + IMX_PIN_REG(MX6Q_PAD_CSI0_DAT10, 0x0650, 0x0280, 4, 0x0000, 0), /* MX6Q_PAD_CSI0_DAT10__SDMA_DEBUG_PC_4 */ + IMX_PIN_REG(MX6Q_PAD_CSI0_DAT10, 0x0650, 0x0280, 5, 0x0000, 0), /* MX6Q_PAD_CSI0_DAT10__GPIO_5_28 */ + IMX_PIN_REG(MX6Q_PAD_CSI0_DAT10, 0x0650, 0x0280, 6, 0x0000, 0), /* MX6Q_PAD_CSI0_DAT10__MMDC_MMDC_DEBUG_33 */ + IMX_PIN_REG(MX6Q_PAD_CSI0_DAT10, 0x0650, 0x0280, 7, 0x0000, 0), /* MX6Q_PAD_CSI0_DAT10__CHEETAH_TRACE_7 */ + IMX_PIN_REG(MX6Q_PAD_CSI0_DAT11, 0x0654, 0x0284, 0, 0x0000, 0), /* MX6Q_PAD_CSI0_DAT11__IPU1_CSI0_D_11 */ + IMX_PIN_REG(MX6Q_PAD_CSI0_DAT11, 0x0654, 0x0284, 1, 0x0000, 0), /* MX6Q_PAD_CSI0_DAT11__AUDMUX_AUD3_RXFS */ + IMX_PIN_REG(MX6Q_PAD_CSI0_DAT11, 0x0654, 0x0284, 2, 0x081C, 2), /* MX6Q_PAD_CSI0_DAT11__ECSPI2_SS0 */ + IMX_PIN_REG(MX6Q_PAD_CSI0_DAT11, 0x0654, 0x0284, 3, 0x0920, 1), /* MX6Q_PAD_CSI0_DAT11__UART1_RXD */ + IMX_PIN_REG(MX6Q_PAD_CSI0_DAT11, 0x0654, 0x0284, 4, 0x0000, 0), /* MX6Q_PAD_CSI0_DAT11__SDMA_DEBUG_PC_5 */ + IMX_PIN_REG(MX6Q_PAD_CSI0_DAT11, 0x0654, 0x0284, 5, 0x0000, 0), /* MX6Q_PAD_CSI0_DAT11__GPIO_5_29 */ + IMX_PIN_REG(MX6Q_PAD_CSI0_DAT11, 0x0654, 0x0284, 6, 0x0000, 0), /* MX6Q_PAD_CSI0_DAT11__MMDC_MMDC_DEBUG_34 */ + IMX_PIN_REG(MX6Q_PAD_CSI0_DAT11, 0x0654, 0x0284, 7, 0x0000, 0), /* MX6Q_PAD_CSI0_DAT11__CHEETAH_TRACE_8 */ + IMX_PIN_REG(MX6Q_PAD_CSI0_DAT12, 0x0658, 0x0288, 0, 0x0000, 0), /* MX6Q_PAD_CSI0_DAT12__IPU1_CSI0_D_12 */ + IMX_PIN_REG(MX6Q_PAD_CSI0_DAT12, 0x0658, 0x0288, 1, 0x0000, 0), /* MX6Q_PAD_CSI0_DAT12__WEIM_WEIM_D_8 */ + IMX_PIN_REG(MX6Q_PAD_CSI0_DAT12, 0x0658, 0x0288, 2, 0x0000, 0), /* MX6Q_PAD_CSI0_DAT12__PCIE_CTRL_MUX_16 */ + IMX_PIN_REG(MX6Q_PAD_CSI0_DAT12, 0x0658, 0x0288, 3, 0x0000, 0), /* MX6Q_PAD_CSI0_DAT12__UART4_TXD */ + IMX_PIN_REG(MX6Q_PAD_CSI0_DAT12, 0x0658, 0x0288, 4, 0x0000, 0), /* MX6Q_PAD_CSI0_DAT12__SDMA_DEBUG_PC_6 */ + IMX_PIN_REG(MX6Q_PAD_CSI0_DAT12, 0x0658, 0x0288, 5, 0x0000, 0), /* MX6Q_PAD_CSI0_DAT12__GPIO_5_30 */ + IMX_PIN_REG(MX6Q_PAD_CSI0_DAT12, 0x0658, 0x0288, 6, 0x0000, 0), /* MX6Q_PAD_CSI0_DAT12__MMDC_MMDC_DEBUG_35 */ + IMX_PIN_REG(MX6Q_PAD_CSI0_DAT12, 0x0658, 0x0288, 7, 0x0000, 0), /* MX6Q_PAD_CSI0_DAT12__CHEETAH_TRACE_9 */ + IMX_PIN_REG(MX6Q_PAD_CSI0_DAT13, 0x065C, 0x028C, 0, 0x0000, 0), /* MX6Q_PAD_CSI0_DAT13__IPU1_CSI0_D_13 */ + IMX_PIN_REG(MX6Q_PAD_CSI0_DAT13, 0x065C, 0x028C, 1, 0x0000, 0), /* MX6Q_PAD_CSI0_DAT13__WEIM_WEIM_D_9 */ + IMX_PIN_REG(MX6Q_PAD_CSI0_DAT13, 0x065C, 0x028C, 2, 0x0000, 0), /* MX6Q_PAD_CSI0_DAT13__PCIE_CTRL_MUX_17 */ + IMX_PIN_REG(MX6Q_PAD_CSI0_DAT13, 0x065C, 0x028C, 3, 0x0938, 3), /* MX6Q_PAD_CSI0_DAT13__UART4_RXD */ + IMX_PIN_REG(MX6Q_PAD_CSI0_DAT13, 0x065C, 0x028C, 4, 0x0000, 0), /* MX6Q_PAD_CSI0_DAT13__SDMA_DEBUG_PC_7 */ + IMX_PIN_REG(MX6Q_PAD_CSI0_DAT13, 0x065C, 0x028C, 5, 0x0000, 0), /* MX6Q_PAD_CSI0_DAT13__GPIO_5_31 */ + IMX_PIN_REG(MX6Q_PAD_CSI0_DAT13, 0x065C, 0x028C, 6, 0x0000, 0), /* MX6Q_PAD_CSI0_DAT13__MMDC_MMDC_DEBUG_36 */ + IMX_PIN_REG(MX6Q_PAD_CSI0_DAT13, 0x065C, 0x028C, 7, 0x0000, 0), /* MX6Q_PAD_CSI0_DAT13__CHEETAH_TRACE_10 */ + IMX_PIN_REG(MX6Q_PAD_CSI0_DAT14, 0x0660, 0x0290, 0, 0x0000, 0), /* MX6Q_PAD_CSI0_DAT14__IPU1_CSI0_D_14 */ + IMX_PIN_REG(MX6Q_PAD_CSI0_DAT14, 0x0660, 0x0290, 1, 0x0000, 0), /* MX6Q_PAD_CSI0_DAT14__WEIM_WEIM_D_10 */ + IMX_PIN_REG(MX6Q_PAD_CSI0_DAT14, 0x0660, 0x0290, 2, 0x0000, 0), /* MX6Q_PAD_CSI0_DAT14__PCIE_CTRL_MUX_18 */ + IMX_PIN_REG(MX6Q_PAD_CSI0_DAT14, 0x0660, 0x0290, 3, 0x0000, 0), /* MX6Q_PAD_CSI0_DAT14__UART5_TXD */ + IMX_PIN_REG(MX6Q_PAD_CSI0_DAT14, 0x0660, 0x0290, 4, 0x0000, 0), /* MX6Q_PAD_CSI0_DAT14__SDMA_DEBUG_PC_8 */ + IMX_PIN_REG(MX6Q_PAD_CSI0_DAT14, 0x0660, 0x0290, 5, 0x0000, 0), /* MX6Q_PAD_CSI0_DAT14__GPIO_6_0 */ + IMX_PIN_REG(MX6Q_PAD_CSI0_DAT14, 0x0660, 0x0290, 6, 0x0000, 0), /* MX6Q_PAD_CSI0_DAT14__MMDC_MMDC_DEBUG_37 */ + IMX_PIN_REG(MX6Q_PAD_CSI0_DAT14, 0x0660, 0x0290, 7, 0x0000, 0), /* MX6Q_PAD_CSI0_DAT14__CHEETAH_TRACE_11 */ + IMX_PIN_REG(MX6Q_PAD_CSI0_DAT15, 0x0664, 0x0294, 0, 0x0000, 0), /* MX6Q_PAD_CSI0_DAT15__IPU1_CSI0_D_15 */ + IMX_PIN_REG(MX6Q_PAD_CSI0_DAT15, 0x0664, 0x0294, 1, 0x0000, 0), /* MX6Q_PAD_CSI0_DAT15__WEIM_WEIM_D_11 */ + IMX_PIN_REG(MX6Q_PAD_CSI0_DAT15, 0x0664, 0x0294, 2, 0x0000, 0), /* MX6Q_PAD_CSI0_DAT15__PCIE_CTRL_MUX_19 */ + IMX_PIN_REG(MX6Q_PAD_CSI0_DAT15, 0x0664, 0x0294, 3, 0x0940, 3), /* MX6Q_PAD_CSI0_DAT15__UART5_RXD */ + IMX_PIN_REG(MX6Q_PAD_CSI0_DAT15, 0x0664, 0x0294, 4, 0x0000, 0), /* MX6Q_PAD_CSI0_DAT15__SDMA_DEBUG_PC_9 */ + IMX_PIN_REG(MX6Q_PAD_CSI0_DAT15, 0x0664, 0x0294, 5, 0x0000, 0), /* MX6Q_PAD_CSI0_DAT15__GPIO_6_1 */ + IMX_PIN_REG(MX6Q_PAD_CSI0_DAT15, 0x0664, 0x0294, 6, 0x0000, 0), /* MX6Q_PAD_CSI0_DAT15__MMDC_MMDC_DEBUG_38 */ + IMX_PIN_REG(MX6Q_PAD_CSI0_DAT15, 0x0664, 0x0294, 7, 0x0000, 0), /* MX6Q_PAD_CSI0_DAT15__CHEETAH_TRACE_12 */ + IMX_PIN_REG(MX6Q_PAD_CSI0_DAT16, 0x0668, 0x0298, 0, 0x0000, 0), /* MX6Q_PAD_CSI0_DAT16__IPU1_CSI0_D_16 */ + IMX_PIN_REG(MX6Q_PAD_CSI0_DAT16, 0x0668, 0x0298, 1, 0x0000, 0), /* MX6Q_PAD_CSI0_DAT16__WEIM_WEIM_D_12 */ + IMX_PIN_REG(MX6Q_PAD_CSI0_DAT16, 0x0668, 0x0298, 2, 0x0000, 0), /* MX6Q_PAD_CSI0_DAT16__PCIE_CTRL_MUX_20 */ + IMX_PIN_REG(MX6Q_PAD_CSI0_DAT16, 0x0668, 0x0298, 3, 0x0934, 0), /* MX6Q_PAD_CSI0_DAT16__UART4_RTS */ + IMX_PIN_REG(MX6Q_PAD_CSI0_DAT16, 0x0668, 0x0298, 4, 0x0000, 0), /* MX6Q_PAD_CSI0_DAT16__SDMA_DEBUG_PC_10 */ + IMX_PIN_REG(MX6Q_PAD_CSI0_DAT16, 0x0668, 0x0298, 5, 0x0000, 0), /* MX6Q_PAD_CSI0_DAT16__GPIO_6_2 */ + IMX_PIN_REG(MX6Q_PAD_CSI0_DAT16, 0x0668, 0x0298, 6, 0x0000, 0), /* MX6Q_PAD_CSI0_DAT16__MMDC_MMDC_DEBUG_39 */ + IMX_PIN_REG(MX6Q_PAD_CSI0_DAT16, 0x0668, 0x0298, 7, 0x0000, 0), /* MX6Q_PAD_CSI0_DAT16__CHEETAH_TRACE_13 */ + IMX_PIN_REG(MX6Q_PAD_CSI0_DAT17, 0x066C, 0x029C, 0, 0x0000, 0), /* MX6Q_PAD_CSI0_DAT17__IPU1_CSI0_D_17 */ + IMX_PIN_REG(MX6Q_PAD_CSI0_DAT17, 0x066C, 0x029C, 1, 0x0000, 0), /* MX6Q_PAD_CSI0_DAT17__WEIM_WEIM_D_13 */ + IMX_PIN_REG(MX6Q_PAD_CSI0_DAT17, 0x066C, 0x029C, 2, 0x0000, 0), /* MX6Q_PAD_CSI0_DAT17__PCIE_CTRL_MUX_21 */ + IMX_PIN_REG(MX6Q_PAD_CSI0_DAT17, 0x066C, 0x029C, 3, 0x0934, 1), /* MX6Q_PAD_CSI0_DAT17__UART4_CTS */ + IMX_PIN_REG(MX6Q_PAD_CSI0_DAT17, 0x066C, 0x029C, 4, 0x0000, 0), /* MX6Q_PAD_CSI0_DAT17__SDMA_DEBUG_PC_11 */ + IMX_PIN_REG(MX6Q_PAD_CSI0_DAT17, 0x066C, 0x029C, 5, 0x0000, 0), /* MX6Q_PAD_CSI0_DAT17__GPIO_6_3 */ + IMX_PIN_REG(MX6Q_PAD_CSI0_DAT17, 0x066C, 0x029C, 6, 0x0000, 0), /* MX6Q_PAD_CSI0_DAT17__MMDC_MMDC_DEBUG_40 */ + IMX_PIN_REG(MX6Q_PAD_CSI0_DAT17, 0x066C, 0x029C, 7, 0x0000, 0), /* MX6Q_PAD_CSI0_DAT17__CHEETAH_TRACE_14 */ + IMX_PIN_REG(MX6Q_PAD_CSI0_DAT18, 0x0670, 0x02A0, 0, 0x0000, 0), /* MX6Q_PAD_CSI0_DAT18__IPU1_CSI0_D_18 */ + IMX_PIN_REG(MX6Q_PAD_CSI0_DAT18, 0x0670, 0x02A0, 1, 0x0000, 0), /* MX6Q_PAD_CSI0_DAT18__WEIM_WEIM_D_14 */ + IMX_PIN_REG(MX6Q_PAD_CSI0_DAT18, 0x0670, 0x02A0, 2, 0x0000, 0), /* MX6Q_PAD_CSI0_DAT18__PCIE_CTRL_MUX_22 */ + IMX_PIN_REG(MX6Q_PAD_CSI0_DAT18, 0x0670, 0x02A0, 3, 0x093C, 2), /* MX6Q_PAD_CSI0_DAT18__UART5_RTS */ + IMX_PIN_REG(MX6Q_PAD_CSI0_DAT18, 0x0670, 0x02A0, 4, 0x0000, 0), /* MX6Q_PAD_CSI0_DAT18__SDMA_DEBUG_PC_12 */ + IMX_PIN_REG(MX6Q_PAD_CSI0_DAT18, 0x0670, 0x02A0, 5, 0x0000, 0), /* MX6Q_PAD_CSI0_DAT18__GPIO_6_4 */ + IMX_PIN_REG(MX6Q_PAD_CSI0_DAT18, 0x0670, 0x02A0, 6, 0x0000, 0), /* MX6Q_PAD_CSI0_DAT18__MMDC_MMDC_DEBUG_41 */ + IMX_PIN_REG(MX6Q_PAD_CSI0_DAT18, 0x0670, 0x02A0, 7, 0x0000, 0), /* MX6Q_PAD_CSI0_DAT18__CHEETAH_TRACE_15 */ + IMX_PIN_REG(MX6Q_PAD_CSI0_DAT19, 0x0674, 0x02A4, 0, 0x0000, 0), /* MX6Q_PAD_CSI0_DAT19__IPU1_CSI0_D_19 */ + IMX_PIN_REG(MX6Q_PAD_CSI0_DAT19, 0x0674, 0x02A4, 1, 0x0000, 0), /* MX6Q_PAD_CSI0_DAT19__WEIM_WEIM_D_15 */ + IMX_PIN_REG(MX6Q_PAD_CSI0_DAT19, 0x0674, 0x02A4, 2, 0x0000, 0), /* MX6Q_PAD_CSI0_DAT19__PCIE_CTRL_MUX_23 */ + IMX_PIN_REG(MX6Q_PAD_CSI0_DAT19, 0x0674, 0x02A4, 3, 0x093C, 3), /* MX6Q_PAD_CSI0_DAT19__UART5_CTS */ + IMX_PIN_REG(MX6Q_PAD_CSI0_DAT19, 0x0674, 0x02A4, 4, 0x0000, 0), /* MX6Q_PAD_CSI0_DAT19__SDMA_DEBUG_PC_13 */ + IMX_PIN_REG(MX6Q_PAD_CSI0_DAT19, 0x0674, 0x02A4, 5, 0x0000, 0), /* MX6Q_PAD_CSI0_DAT19__GPIO_6_5 */ + IMX_PIN_REG(MX6Q_PAD_CSI0_DAT19, 0x0674, 0x02A4, 6, 0x0000, 0), /* MX6Q_PAD_CSI0_DAT19__MMDC_MMDC_DEBUG_42 */ + IMX_PIN_REG(MX6Q_PAD_CSI0_DAT19, 0x0674, 0x02A4, 7, 0x0000, 0), /* MX6Q_PAD_CSI0_DAT19__ANATOP_TESTO_9 */ + IMX_PIN_REG(MX6Q_PAD_JTAG_TMS, 0x0678, NO_MUX, 0, 0x0000, 0), /* MX6Q_PAD_JTAG_TMS__SJC_TMS */ + IMX_PIN_REG(MX6Q_PAD_JTAG_MOD, 0x067C, NO_MUX, 0, 0x0000, 0), /* MX6Q_PAD_JTAG_MOD__SJC_MOD */ + IMX_PIN_REG(MX6Q_PAD_JTAG_TRSTB, 0x0680, NO_MUX, 0, 0x0000, 0), /* MX6Q_PAD_JTAG_TRSTB__SJC_TRSTB */ + IMX_PIN_REG(MX6Q_PAD_JTAG_TDI, 0x0684, NO_MUX, 0, 0x0000, 0), /* MX6Q_PAD_JTAG_TDI__SJC_TDI */ + IMX_PIN_REG(MX6Q_PAD_JTAG_TCK, 0x0688, NO_MUX, 0, 0x0000, 0), /* MX6Q_PAD_JTAG_TCK__SJC_TCK */ + IMX_PIN_REG(MX6Q_PAD_JTAG_TDO, 0x068C, NO_MUX, 0, 0x0000, 0), /* MX6Q_PAD_JTAG_TDO__SJC_TDO */ + IMX_PIN_REG(MX6Q_PAD_LVDS1_TX3_P, NO_PAD, NO_MUX, 0, 0x0000, 0), /* MX6Q_PAD_LVDS1_TX3_P__LDB_LVDS1_TX3 */ + IMX_PIN_REG(MX6Q_PAD_LVDS1_TX2_P, NO_PAD, NO_MUX, 0, 0x0000, 0), /* MX6Q_PAD_LVDS1_TX2_P__LDB_LVDS1_TX2 */ + IMX_PIN_REG(MX6Q_PAD_LVDS1_CLK_P, NO_PAD, NO_MUX, 0, 0x0000, 0), /* MX6Q_PAD_LVDS1_CLK_P__LDB_LVDS1_CLK */ + IMX_PIN_REG(MX6Q_PAD_LVDS1_TX1_P, NO_PAD, NO_MUX, 0, 0x0000, 0), /* MX6Q_PAD_LVDS1_TX1_P__LDB_LVDS1_TX1 */ + IMX_PIN_REG(MX6Q_PAD_LVDS1_TX0_P, NO_PAD, NO_MUX, 0, 0x0000, 0), /* MX6Q_PAD_LVDS1_TX0_P__LDB_LVDS1_TX0 */ + IMX_PIN_REG(MX6Q_PAD_LVDS0_TX3_P, NO_PAD, NO_MUX, 0, 0x0000, 0), /* MX6Q_PAD_LVDS0_TX3_P__LDB_LVDS0_TX3 */ + IMX_PIN_REG(MX6Q_PAD_LVDS0_CLK_P, NO_PAD, NO_MUX, 0, 0x0000, 0), /* MX6Q_PAD_LVDS0_CLK_P__LDB_LVDS0_CLK */ + IMX_PIN_REG(MX6Q_PAD_LVDS0_TX2_P, NO_PAD, NO_MUX, 0, 0x0000, 0), /* MX6Q_PAD_LVDS0_TX2_P__LDB_LVDS0_TX2 */ + IMX_PIN_REG(MX6Q_PAD_LVDS0_TX1_P, NO_PAD, NO_MUX, 0, 0x0000, 0), /* MX6Q_PAD_LVDS0_TX1_P__LDB_LVDS0_TX1 */ + IMX_PIN_REG(MX6Q_PAD_LVDS0_TX0_P, NO_PAD, NO_MUX, 0, 0x0000, 0), /* MX6Q_PAD_LVDS0_TX0_P__LDB_LVDS0_TX0 */ + IMX_PIN_REG(MX6Q_PAD_TAMPER, NO_PAD, NO_MUX, 0, 0x0000, 0), /* MX6Q_PAD_TAMPER__SNVS_LP_WRAP_SNVS_TD1 */ + IMX_PIN_REG(MX6Q_PAD_PMIC_ON_REQ, NO_PAD, NO_MUX, 0, 0x0000, 0), /* MX6Q_PAD_PMIC_ON_REQ__SNVS_LPWRAP_WKALM */ + IMX_PIN_REG(MX6Q_PAD_PMIC_STBY_REQ, NO_PAD, NO_MUX, 0, 0x0000, 0), /* MX6Q_PAD_PMIC_STBY_REQ__CCM_PMIC_STBYRQ */ + IMX_PIN_REG(MX6Q_PAD_POR_B, NO_PAD, NO_MUX, 0, 0x0000, 0), /* MX6Q_PAD_POR_B__SRC_POR_B */ + IMX_PIN_REG(MX6Q_PAD_BOOT_MODE1, NO_PAD, NO_MUX, 0, 0x0000, 0), /* MX6Q_PAD_BOOT_MODE1__SRC_BOOT_MODE_1 */ + IMX_PIN_REG(MX6Q_PAD_RESET_IN_B, NO_PAD, NO_MUX, 0, 0x0000, 0), /* MX6Q_PAD_RESET_IN_B__SRC_RESET_B */ + IMX_PIN_REG(MX6Q_PAD_BOOT_MODE0, NO_PAD, NO_MUX, 0, 0x0000, 0), /* MX6Q_PAD_BOOT_MODE0__SRC_BOOT_MODE_0 */ + IMX_PIN_REG(MX6Q_PAD_TEST_MODE, NO_PAD, NO_MUX, 0, 0x0000, 0), /* MX6Q_PAD_TEST_MODE__TCU_TEST_MODE */ + IMX_PIN_REG(MX6Q_PAD_SD3_DAT7, 0x0690, 0x02A8, 0, 0x0000, 0), /* MX6Q_PAD_SD3_DAT7__USDHC3_DAT7 */ + IMX_PIN_REG(MX6Q_PAD_SD3_DAT7, 0x0690, 0x02A8, 1, 0x0000, 0), /* MX6Q_PAD_SD3_DAT7__UART1_TXD */ + IMX_PIN_REG(MX6Q_PAD_SD3_DAT7, 0x0690, 0x02A8, 2, 0x0000, 0), /* MX6Q_PAD_SD3_DAT7__PCIE_CTRL_MUX_24 */ + IMX_PIN_REG(MX6Q_PAD_SD3_DAT7, 0x0690, 0x02A8, 3, 0x0000, 0), /* MX6Q_PAD_SD3_DAT7__USBOH3_UH3_DFD_OUT_0 */ + IMX_PIN_REG(MX6Q_PAD_SD3_DAT7, 0x0690, 0x02A8, 4, 0x0000, 0), /* MX6Q_PAD_SD3_DAT7__USBOH3_UH2_DFD_OUT_0 */ + IMX_PIN_REG(MX6Q_PAD_SD3_DAT7, 0x0690, 0x02A8, 5, 0x0000, 0), /* MX6Q_PAD_SD3_DAT7__GPIO_6_17 */ + IMX_PIN_REG(MX6Q_PAD_SD3_DAT7, 0x0690, 0x02A8, 6, 0x0000, 0), /* MX6Q_PAD_SD3_DAT7__MIPI_CORE_DPHY_IN_12 */ + IMX_PIN_REG(MX6Q_PAD_SD3_DAT7, 0x0690, 0x02A8, 7, 0x0000, 0), /* MX6Q_PAD_SD3_DAT7__USBPHY2_CLK20DIV */ + IMX_PIN_REG(MX6Q_PAD_SD3_DAT6, 0x0694, 0x02AC, 0, 0x0000, 0), /* MX6Q_PAD_SD3_DAT6__USDHC3_DAT6 */ + IMX_PIN_REG(MX6Q_PAD_SD3_DAT6, 0x0694, 0x02AC, 1, 0x0920, 3), /* MX6Q_PAD_SD3_DAT6__UART1_RXD */ + IMX_PIN_REG(MX6Q_PAD_SD3_DAT6, 0x0694, 0x02AC, 2, 0x0000, 0), /* MX6Q_PAD_SD3_DAT6__PCIE_CTRL_MUX_25 */ + IMX_PIN_REG(MX6Q_PAD_SD3_DAT6, 0x0694, 0x02AC, 3, 0x0000, 0), /* MX6Q_PAD_SD3_DAT6__USBOH3_UH3_DFD_OUT_1 */ + IMX_PIN_REG(MX6Q_PAD_SD3_DAT6, 0x0694, 0x02AC, 4, 0x0000, 0), /* MX6Q_PAD_SD3_DAT6__USBOH3_UH2_DFD_OUT_1 */ + IMX_PIN_REG(MX6Q_PAD_SD3_DAT6, 0x0694, 0x02AC, 5, 0x0000, 0), /* MX6Q_PAD_SD3_DAT6__GPIO_6_18 */ + IMX_PIN_REG(MX6Q_PAD_SD3_DAT6, 0x0694, 0x02AC, 6, 0x0000, 0), /* MX6Q_PAD_SD3_DAT6__MIPI_CORE_DPHY_IN_13 */ + IMX_PIN_REG(MX6Q_PAD_SD3_DAT6, 0x0694, 0x02AC, 7, 0x0000, 0), /* MX6Q_PAD_SD3_DAT6__ANATOP_TESTO_10 */ + IMX_PIN_REG(MX6Q_PAD_SD3_DAT5, 0x0698, 0x02B0, 0, 0x0000, 0), /* MX6Q_PAD_SD3_DAT5__USDHC3_DAT5 */ + IMX_PIN_REG(MX6Q_PAD_SD3_DAT5, 0x0698, 0x02B0, 1, 0x0000, 0), /* MX6Q_PAD_SD3_DAT5__UART2_TXD */ + IMX_PIN_REG(MX6Q_PAD_SD3_DAT5, 0x0698, 0x02B0, 2, 0x0000, 0), /* MX6Q_PAD_SD3_DAT5__PCIE_CTRL_MUX_26 */ + IMX_PIN_REG(MX6Q_PAD_SD3_DAT5, 0x0698, 0x02B0, 3, 0x0000, 0), /* MX6Q_PAD_SD3_DAT5__USBOH3_UH3_DFD_OUT_2 */ + IMX_PIN_REG(MX6Q_PAD_SD3_DAT5, 0x0698, 0x02B0, 4, 0x0000, 0), /* MX6Q_PAD_SD3_DAT5__USBOH3_UH2_DFD_OUT_2 */ + IMX_PIN_REG(MX6Q_PAD_SD3_DAT5, 0x0698, 0x02B0, 5, 0x0000, 0), /* MX6Q_PAD_SD3_DAT5__GPIO_7_0 */ + IMX_PIN_REG(MX6Q_PAD_SD3_DAT5, 0x0698, 0x02B0, 6, 0x0000, 0), /* MX6Q_PAD_SD3_DAT5__MIPI_CORE_DPHY_IN_14 */ + IMX_PIN_REG(MX6Q_PAD_SD3_DAT5, 0x0698, 0x02B0, 7, 0x0000, 0), /* MX6Q_PAD_SD3_DAT5__ANATOP_TESTO_11 */ + IMX_PIN_REG(MX6Q_PAD_SD3_DAT4, 0x069C, 0x02B4, 0, 0x0000, 0), /* MX6Q_PAD_SD3_DAT4__USDHC3_DAT4 */ + IMX_PIN_REG(MX6Q_PAD_SD3_DAT4, 0x069C, 0x02B4, 1, 0x0928, 5), /* MX6Q_PAD_SD3_DAT4__UART2_RXD */ + IMX_PIN_REG(MX6Q_PAD_SD3_DAT4, 0x069C, 0x02B4, 2, 0x0000, 0), /* MX6Q_PAD_SD3_DAT4__PCIE_CTRL_MUX_27 */ + IMX_PIN_REG(MX6Q_PAD_SD3_DAT4, 0x069C, 0x02B4, 3, 0x0000, 0), /* MX6Q_PAD_SD3_DAT4__USBOH3_UH3_DFD_OUT_3 */ + IMX_PIN_REG(MX6Q_PAD_SD3_DAT4, 0x069C, 0x02B4, 4, 0x0000, 0), /* MX6Q_PAD_SD3_DAT4__USBOH3_UH2_DFD_OUT_3 */ + IMX_PIN_REG(MX6Q_PAD_SD3_DAT4, 0x069C, 0x02B4, 5, 0x0000, 0), /* MX6Q_PAD_SD3_DAT4__GPIO_7_1 */ + IMX_PIN_REG(MX6Q_PAD_SD3_DAT4, 0x069C, 0x02B4, 6, 0x0000, 0), /* MX6Q_PAD_SD3_DAT4__MIPI_CORE_DPHY_IN_15 */ + IMX_PIN_REG(MX6Q_PAD_SD3_DAT4, 0x069C, 0x02B4, 7, 0x0000, 0), /* MX6Q_PAD_SD3_DAT4__ANATOP_TESTO_12 */ + IMX_PIN_REG(MX6Q_PAD_SD3_CMD, 0x06A0, 0x02B8, 0, 0x0000, 0), /* MX6Q_PAD_SD3_CMD__USDHC3_CMD */ + IMX_PIN_REG(MX6Q_PAD_SD3_CMD, 0x06A0, 0x02B8, 1, 0x0924, 2), /* MX6Q_PAD_SD3_CMD__UART2_CTS */ + IMX_PIN_REG(MX6Q_PAD_SD3_CMD, 0x06A0, 0x02B8, 2, 0x0000, 0), /* MX6Q_PAD_SD3_CMD__CAN1_TXCAN */ + IMX_PIN_REG(MX6Q_PAD_SD3_CMD, 0x06A0, 0x02B8, 3, 0x0000, 0), /* MX6Q_PAD_SD3_CMD__USBOH3_UH3_DFD_OUT_4 */ + IMX_PIN_REG(MX6Q_PAD_SD3_CMD, 0x06A0, 0x02B8, 4, 0x0000, 0), /* MX6Q_PAD_SD3_CMD__USBOH3_UH2_DFD_OUT_4 */ + IMX_PIN_REG(MX6Q_PAD_SD3_CMD, 0x06A0, 0x02B8, 5, 0x0000, 0), /* MX6Q_PAD_SD3_CMD__GPIO_7_2 */ + IMX_PIN_REG(MX6Q_PAD_SD3_CMD, 0x06A0, 0x02B8, 6, 0x0000, 0), /* MX6Q_PAD_SD3_CMD__MIPI_CORE_DPHY_IN_16 */ + IMX_PIN_REG(MX6Q_PAD_SD3_CMD, 0x06A0, 0x02B8, 7, 0x0000, 0), /* MX6Q_PAD_SD3_CMD__ANATOP_TESTO_13 */ + IMX_PIN_REG(MX6Q_PAD_SD3_CLK, 0x06A4, 0x02BC, 0, 0x0000, 0), /* MX6Q_PAD_SD3_CLK__USDHC3_CLK */ + IMX_PIN_REG(MX6Q_PAD_SD3_CLK, 0x06A4, 0x02BC, 1, 0x0924, 3), /* MX6Q_PAD_SD3_CLK__UART2_RTS */ + IMX_PIN_REG(MX6Q_PAD_SD3_CLK, 0x06A4, 0x02BC, 2, 0x07E4, 2), /* MX6Q_PAD_SD3_CLK__CAN1_RXCAN */ + IMX_PIN_REG(MX6Q_PAD_SD3_CLK, 0x06A4, 0x02BC, 3, 0x0000, 0), /* MX6Q_PAD_SD3_CLK__USBOH3_UH3_DFD_OUT_5 */ + IMX_PIN_REG(MX6Q_PAD_SD3_CLK, 0x06A4, 0x02BC, 4, 0x0000, 0), /* MX6Q_PAD_SD3_CLK__USBOH3_UH2_DFD_OUT_5 */ + IMX_PIN_REG(MX6Q_PAD_SD3_CLK, 0x06A4, 0x02BC, 5, 0x0000, 0), /* MX6Q_PAD_SD3_CLK__GPIO_7_3 */ + IMX_PIN_REG(MX6Q_PAD_SD3_CLK, 0x06A4, 0x02BC, 6, 0x0000, 0), /* MX6Q_PAD_SD3_CLK__MIPI_CORE_DPHY_IN_17 */ + IMX_PIN_REG(MX6Q_PAD_SD3_CLK, 0x06A4, 0x02BC, 7, 0x0000, 0), /* MX6Q_PAD_SD3_CLK__ANATOP_TESTO_14 */ + IMX_PIN_REG(MX6Q_PAD_SD3_DAT0, 0x06A8, 0x02C0, 0, 0x0000, 0), /* MX6Q_PAD_SD3_DAT0__USDHC3_DAT0 */ + IMX_PIN_REG(MX6Q_PAD_SD3_DAT0, 0x06A8, 0x02C0, 1, 0x091C, 2), /* MX6Q_PAD_SD3_DAT0__UART1_CTS */ + IMX_PIN_REG(MX6Q_PAD_SD3_DAT0, 0x06A8, 0x02C0, 2, 0x0000, 0), /* MX6Q_PAD_SD3_DAT0__CAN2_TXCAN */ + IMX_PIN_REG(MX6Q_PAD_SD3_DAT0, 0x06A8, 0x02C0, 3, 0x0000, 0), /* MX6Q_PAD_SD3_DAT0__USBOH3_UH3_DFD_OUT_6 */ + IMX_PIN_REG(MX6Q_PAD_SD3_DAT0, 0x06A8, 0x02C0, 4, 0x0000, 0), /* MX6Q_PAD_SD3_DAT0__USBOH3_UH2_DFD_OUT_6 */ + IMX_PIN_REG(MX6Q_PAD_SD3_DAT0, 0x06A8, 0x02C0, 5, 0x0000, 0), /* MX6Q_PAD_SD3_DAT0__GPIO_7_4 */ + IMX_PIN_REG(MX6Q_PAD_SD3_DAT0, 0x06A8, 0x02C0, 6, 0x0000, 0), /* MX6Q_PAD_SD3_DAT0__MIPI_CORE_DPHY_IN_18 */ + IMX_PIN_REG(MX6Q_PAD_SD3_DAT0, 0x06A8, 0x02C0, 7, 0x0000, 0), /* MX6Q_PAD_SD3_DAT0__ANATOP_TESTO_15 */ + IMX_PIN_REG(MX6Q_PAD_SD3_DAT1, 0x06AC, 0x02C4, 0, 0x0000, 0), /* MX6Q_PAD_SD3_DAT1__USDHC3_DAT1 */ + IMX_PIN_REG(MX6Q_PAD_SD3_DAT1, 0x06AC, 0x02C4, 1, 0x091C, 3), /* MX6Q_PAD_SD3_DAT1__UART1_RTS */ + IMX_PIN_REG(MX6Q_PAD_SD3_DAT1, 0x06AC, 0x02C4, 2, 0x07E8, 1), /* MX6Q_PAD_SD3_DAT1__CAN2_RXCAN */ + IMX_PIN_REG(MX6Q_PAD_SD3_DAT1, 0x06AC, 0x02C4, 3, 0x0000, 0), /* MX6Q_PAD_SD3_DAT1__USBOH3_UH3_DFD_OUT_7 */ + IMX_PIN_REG(MX6Q_PAD_SD3_DAT1, 0x06AC, 0x02C4, 4, 0x0000, 0), /* MX6Q_PAD_SD3_DAT1__USBOH3_UH2_DFD_OUT_7 */ + IMX_PIN_REG(MX6Q_PAD_SD3_DAT1, 0x06AC, 0x02C4, 5, 0x0000, 0), /* MX6Q_PAD_SD3_DAT1__GPIO_7_5 */ + IMX_PIN_REG(MX6Q_PAD_SD3_DAT1, 0x06AC, 0x02C4, 6, 0x0000, 0), /* MX6Q_PAD_SD3_DAT1__MIPI_CORE_DPHY_IN_19 */ + IMX_PIN_REG(MX6Q_PAD_SD3_DAT1, 0x06AC, 0x02C4, 7, 0x0000, 0), /* MX6Q_PAD_SD3_DAT1__ANATOP_TESTI_0 */ + IMX_PIN_REG(MX6Q_PAD_SD3_DAT2, 0x06B0, 0x02C8, 0, 0x0000, 0), /* MX6Q_PAD_SD3_DAT2__USDHC3_DAT2 */ + IMX_PIN_REG(MX6Q_PAD_SD3_DAT2, 0x06B0, 0x02C8, 2, 0x0000, 0), /* MX6Q_PAD_SD3_DAT2__PCIE_CTRL_MUX_28 */ + IMX_PIN_REG(MX6Q_PAD_SD3_DAT2, 0x06B0, 0x02C8, 3, 0x0000, 0), /* MX6Q_PAD_SD3_DAT2__USBOH3_UH3_DFD_OUT_8 */ + IMX_PIN_REG(MX6Q_PAD_SD3_DAT2, 0x06B0, 0x02C8, 4, 0x0000, 0), /* MX6Q_PAD_SD3_DAT2__USBOH3_UH2_DFD_OUT_8 */ + IMX_PIN_REG(MX6Q_PAD_SD3_DAT2, 0x06B0, 0x02C8, 5, 0x0000, 0), /* MX6Q_PAD_SD3_DAT2__GPIO_7_6 */ + IMX_PIN_REG(MX6Q_PAD_SD3_DAT2, 0x06B0, 0x02C8, 6, 0x0000, 0), /* MX6Q_PAD_SD3_DAT2__MIPI_CORE_DPHY_IN_20 */ + IMX_PIN_REG(MX6Q_PAD_SD3_DAT2, 0x06B0, 0x02C8, 7, 0x0000, 0), /* MX6Q_PAD_SD3_DAT2__ANATOP_TESTI_1 */ + IMX_PIN_REG(MX6Q_PAD_SD3_DAT3, 0x06B4, 0x02CC, 0, 0x0000, 0), /* MX6Q_PAD_SD3_DAT3__USDHC3_DAT3 */ + IMX_PIN_REG(MX6Q_PAD_SD3_DAT3, 0x06B4, 0x02CC, 1, 0x092C, 4), /* MX6Q_PAD_SD3_DAT3__UART3_CTS */ + IMX_PIN_REG(MX6Q_PAD_SD3_DAT3, 0x06B4, 0x02CC, 2, 0x0000, 0), /* MX6Q_PAD_SD3_DAT3__PCIE_CTRL_MUX_29 */ + IMX_PIN_REG(MX6Q_PAD_SD3_DAT3, 0x06B4, 0x02CC, 3, 0x0000, 0), /* MX6Q_PAD_SD3_DAT3__USBOH3_UH3_DFD_OUT_9 */ + IMX_PIN_REG(MX6Q_PAD_SD3_DAT3, 0x06B4, 0x02CC, 4, 0x0000, 0), /* MX6Q_PAD_SD3_DAT3__USBOH3_UH2_DFD_OUT_9 */ + IMX_PIN_REG(MX6Q_PAD_SD3_DAT3, 0x06B4, 0x02CC, 5, 0x0000, 0), /* MX6Q_PAD_SD3_DAT3__GPIO_7_7 */ + IMX_PIN_REG(MX6Q_PAD_SD3_DAT3, 0x06B4, 0x02CC, 6, 0x0000, 0), /* MX6Q_PAD_SD3_DAT3__MIPI_CORE_DPHY_IN_21 */ + IMX_PIN_REG(MX6Q_PAD_SD3_DAT3, 0x06B4, 0x02CC, 7, 0x0000, 0), /* MX6Q_PAD_SD3_DAT3__ANATOP_TESTI_2 */ + IMX_PIN_REG(MX6Q_PAD_SD3_RST, 0x06B8, 0x02D0, 0, 0x0000, 0), /* MX6Q_PAD_SD3_RST__USDHC3_RST */ + IMX_PIN_REG(MX6Q_PAD_SD3_RST, 0x06B8, 0x02D0, 1, 0x092C, 5), /* MX6Q_PAD_SD3_RST__UART3_RTS */ + IMX_PIN_REG(MX6Q_PAD_SD3_RST, 0x06B8, 0x02D0, 2, 0x0000, 0), /* MX6Q_PAD_SD3_RST__PCIE_CTRL_MUX_30 */ + IMX_PIN_REG(MX6Q_PAD_SD3_RST, 0x06B8, 0x02D0, 3, 0x0000, 0), /* MX6Q_PAD_SD3_RST__USBOH3_UH3_DFD_OUT_10 */ + IMX_PIN_REG(MX6Q_PAD_SD3_RST, 0x06B8, 0x02D0, 4, 0x0000, 0), /* MX6Q_PAD_SD3_RST__USBOH3_UH2_DFD_OUT_10 */ + IMX_PIN_REG(MX6Q_PAD_SD3_RST, 0x06B8, 0x02D0, 5, 0x0000, 0), /* MX6Q_PAD_SD3_RST__GPIO_7_8 */ + IMX_PIN_REG(MX6Q_PAD_SD3_RST, 0x06B8, 0x02D0, 6, 0x0000, 0), /* MX6Q_PAD_SD3_RST__MIPI_CORE_DPHY_IN_22 */ + IMX_PIN_REG(MX6Q_PAD_SD3_RST, 0x06B8, 0x02D0, 7, 0x0000, 0), /* MX6Q_PAD_SD3_RST__ANATOP_ANATOP_TESTI_3 */ + IMX_PIN_REG(MX6Q_PAD_NANDF_CLE, 0x06BC, 0x02D4, 0, 0x0000, 0), /* MX6Q_PAD_NANDF_CLE__RAWNAND_CLE */ + IMX_PIN_REG(MX6Q_PAD_NANDF_CLE, 0x06BC, 0x02D4, 1, 0x0000, 0), /* MX6Q_PAD_NANDF_CLE__IPU2_SISG_4 */ + IMX_PIN_REG(MX6Q_PAD_NANDF_CLE, 0x06BC, 0x02D4, 2, 0x0000, 0), /* MX6Q_PAD_NANDF_CLE__PCIE_CTRL_MUX_31 */ + IMX_PIN_REG(MX6Q_PAD_NANDF_CLE, 0x06BC, 0x02D4, 3, 0x0000, 0), /* MX6Q_PAD_NANDF_CLE__USBOH3_UH3_DFD_OT11 */ + IMX_PIN_REG(MX6Q_PAD_NANDF_CLE, 0x06BC, 0x02D4, 4, 0x0000, 0), /* MX6Q_PAD_NANDF_CLE__USBOH3_UH2_DFD_OT11 */ + IMX_PIN_REG(MX6Q_PAD_NANDF_CLE, 0x06BC, 0x02D4, 5, 0x0000, 0), /* MX6Q_PAD_NANDF_CLE__GPIO_6_7 */ + IMX_PIN_REG(MX6Q_PAD_NANDF_CLE, 0x06BC, 0x02D4, 6, 0x0000, 0), /* MX6Q_PAD_NANDF_CLE__MIPI_CORE_DPHY_IN23 */ + IMX_PIN_REG(MX6Q_PAD_NANDF_CLE, 0x06BC, 0x02D4, 7, 0x0000, 0), /* MX6Q_PAD_NANDF_CLE__TPSMP_HTRANS_0 */ + IMX_PIN_REG(MX6Q_PAD_NANDF_ALE, 0x06C0, 0x02D8, 0, 0x0000, 0), /* MX6Q_PAD_NANDF_ALE__RAWNAND_ALE */ + IMX_PIN_REG(MX6Q_PAD_NANDF_ALE, 0x06C0, 0x02D8, 1, 0x0000, 0), /* MX6Q_PAD_NANDF_ALE__USDHC4_RST */ + IMX_PIN_REG(MX6Q_PAD_NANDF_ALE, 0x06C0, 0x02D8, 2, 0x0000, 0), /* MX6Q_PAD_NANDF_ALE__PCIE_CTRL_MUX_0 */ + IMX_PIN_REG(MX6Q_PAD_NANDF_ALE, 0x06C0, 0x02D8, 3, 0x0000, 0), /* MX6Q_PAD_NANDF_ALE__USBOH3_UH3_DFD_OT12 */ + IMX_PIN_REG(MX6Q_PAD_NANDF_ALE, 0x06C0, 0x02D8, 4, 0x0000, 0), /* MX6Q_PAD_NANDF_ALE__USBOH3_UH2_DFD_OT12 */ + IMX_PIN_REG(MX6Q_PAD_NANDF_ALE, 0x06C0, 0x02D8, 5, 0x0000, 0), /* MX6Q_PAD_NANDF_ALE__GPIO_6_8 */ + IMX_PIN_REG(MX6Q_PAD_NANDF_ALE, 0x06C0, 0x02D8, 6, 0x0000, 0), /* MX6Q_PAD_NANDF_ALE__MIPI_CR_DPHY_IN_24 */ + IMX_PIN_REG(MX6Q_PAD_NANDF_ALE, 0x06C0, 0x02D8, 7, 0x0000, 0), /* MX6Q_PAD_NANDF_ALE__TPSMP_HTRANS_1 */ + IMX_PIN_REG(MX6Q_PAD_NANDF_WP_B, 0x06C4, 0x02DC, 0, 0x0000, 0), /* MX6Q_PAD_NANDF_WP_B__RAWNAND_RESETN */ + IMX_PIN_REG(MX6Q_PAD_NANDF_WP_B, 0x06C4, 0x02DC, 1, 0x0000, 0), /* MX6Q_PAD_NANDF_WP_B__IPU2_SISG_5 */ + IMX_PIN_REG(MX6Q_PAD_NANDF_WP_B, 0x06C4, 0x02DC, 2, 0x0000, 0), /* MX6Q_PAD_NANDF_WP_B__PCIE_CTRL__MUX_1 */ + IMX_PIN_REG(MX6Q_PAD_NANDF_WP_B, 0x06C4, 0x02DC, 3, 0x0000, 0), /* MX6Q_PAD_NANDF_WP_B__USBOH3_UH3_DFDOT13 */ + IMX_PIN_REG(MX6Q_PAD_NANDF_WP_B, 0x06C4, 0x02DC, 4, 0x0000, 0), /* MX6Q_PAD_NANDF_WP_B__USBOH3_UH2_DFDOT13 */ + IMX_PIN_REG(MX6Q_PAD_NANDF_WP_B, 0x06C4, 0x02DC, 5, 0x0000, 0), /* MX6Q_PAD_NANDF_WP_B__GPIO_6_9 */ + IMX_PIN_REG(MX6Q_PAD_NANDF_WP_B, 0x06C4, 0x02DC, 6, 0x0000, 0), /* MX6Q_PAD_NANDF_WP_B__MIPI_CR_DPHY_OUT32 */ + IMX_PIN_REG(MX6Q_PAD_NANDF_WP_B, 0x06C4, 0x02DC, 7, 0x0000, 0), /* MX6Q_PAD_NANDF_WP_B__PL301_PER1_HSIZE_0 */ + IMX_PIN_REG(MX6Q_PAD_NANDF_RB0, 0x06C8, 0x02E0, 0, 0x0000, 0), /* MX6Q_PAD_NANDF_RB0__RAWNAND_READY0 */ + IMX_PIN_REG(MX6Q_PAD_NANDF_RB0, 0x06C8, 0x02E0, 1, 0x0000, 0), /* MX6Q_PAD_NANDF_RB0__IPU2_DI0_PIN1 */ + IMX_PIN_REG(MX6Q_PAD_NANDF_RB0, 0x06C8, 0x02E0, 2, 0x0000, 0), /* MX6Q_PAD_NANDF_RB0__PCIE_CTRL_MUX_2 */ + IMX_PIN_REG(MX6Q_PAD_NANDF_RB0, 0x06C8, 0x02E0, 3, 0x0000, 0), /* MX6Q_PAD_NANDF_RB0__USBOH3_UH3_DFD_OT14 */ + IMX_PIN_REG(MX6Q_PAD_NANDF_RB0, 0x06C8, 0x02E0, 4, 0x0000, 0), /* MX6Q_PAD_NANDF_RB0__USBOH3_UH2_DFD_OT14 */ + IMX_PIN_REG(MX6Q_PAD_NANDF_RB0, 0x06C8, 0x02E0, 5, 0x0000, 0), /* MX6Q_PAD_NANDF_RB0__GPIO_6_10 */ + IMX_PIN_REG(MX6Q_PAD_NANDF_RB0, 0x06C8, 0x02E0, 6, 0x0000, 0), /* MX6Q_PAD_NANDF_RB0__MIPI_CR_DPHY_OUT_33 */ + IMX_PIN_REG(MX6Q_PAD_NANDF_RB0, 0x06C8, 0x02E0, 7, 0x0000, 0), /* MX6Q_PAD_NANDF_RB0__PL301_PER1_HSIZE_1 */ + IMX_PIN_REG(MX6Q_PAD_NANDF_CS0, 0x06CC, 0x02E4, 0, 0x0000, 0), /* MX6Q_PAD_NANDF_CS0__RAWNAND_CE0N */ + IMX_PIN_REG(MX6Q_PAD_NANDF_CS0, 0x06CC, 0x02E4, 3, 0x0000, 0), /* MX6Q_PAD_NANDF_CS0__USBOH3_UH3_DFD_OT15 */ + IMX_PIN_REG(MX6Q_PAD_NANDF_CS0, 0x06CC, 0x02E4, 4, 0x0000, 0), /* MX6Q_PAD_NANDF_CS0__USBOH3_UH2_DFD_OT15 */ + IMX_PIN_REG(MX6Q_PAD_NANDF_CS0, 0x06CC, 0x02E4, 5, 0x0000, 0), /* MX6Q_PAD_NANDF_CS0__GPIO_6_11 */ + IMX_PIN_REG(MX6Q_PAD_NANDF_CS0, 0x06CC, 0x02E4, 7, 0x0000, 0), /* MX6Q_PAD_NANDF_CS0__PL301_PER1_HSIZE_2 */ + IMX_PIN_REG(MX6Q_PAD_NANDF_CS1, 0x06D0, 0x02E8, 0, 0x0000, 0), /* MX6Q_PAD_NANDF_CS1__RAWNAND_CE1N */ + IMX_PIN_REG(MX6Q_PAD_NANDF_CS1, 0x06D0, 0x02E8, 1, 0x0000, 0), /* MX6Q_PAD_NANDF_CS1__USDHC4_VSELECT */ + IMX_PIN_REG(MX6Q_PAD_NANDF_CS1, 0x06D0, 0x02E8, 2, 0x0000, 0), /* MX6Q_PAD_NANDF_CS1__USDHC3_VSELECT */ + IMX_PIN_REG(MX6Q_PAD_NANDF_CS1, 0x06D0, 0x02E8, 4, 0x0000, 0), /* MX6Q_PAD_NANDF_CS1__PCIE_CTRL_MUX_3 */ + IMX_PIN_REG(MX6Q_PAD_NANDF_CS1, 0x06D0, 0x02E8, 5, 0x0000, 0), /* MX6Q_PAD_NANDF_CS1__GPIO_6_14 */ + IMX_PIN_REG(MX6Q_PAD_NANDF_CS1, 0x06D0, 0x02E8, 7, 0x0000, 0), /* MX6Q_PAD_NANDF_CS1__PL301_PER1_HRDYOUT */ + IMX_PIN_REG(MX6Q_PAD_NANDF_CS2, 0x06D4, 0x02EC, 0, 0x0000, 0), /* MX6Q_PAD_NANDF_CS2__RAWNAND_CE2N */ + IMX_PIN_REG(MX6Q_PAD_NANDF_CS2, 0x06D4, 0x02EC, 1, 0x0000, 0), /* MX6Q_PAD_NANDF_CS2__IPU1_SISG_0 */ + IMX_PIN_REG(MX6Q_PAD_NANDF_CS2, 0x06D4, 0x02EC, 2, 0x0874, 1), /* MX6Q_PAD_NANDF_CS2__ESAI1_TX0 */ + IMX_PIN_REG(MX6Q_PAD_NANDF_CS2, 0x06D4, 0x02EC, 3, 0x0000, 0), /* MX6Q_PAD_NANDF_CS2__WEIM_WEIM_CRE */ + IMX_PIN_REG(MX6Q_PAD_NANDF_CS2, 0x06D4, 0x02EC, 4, 0x0000, 0), /* MX6Q_PAD_NANDF_CS2__CCM_CLKO2 */ + IMX_PIN_REG(MX6Q_PAD_NANDF_CS2, 0x06D4, 0x02EC, 5, 0x0000, 0), /* MX6Q_PAD_NANDF_CS2__GPIO_6_15 */ + IMX_PIN_REG(MX6Q_PAD_NANDF_CS2, 0x06D4, 0x02EC, 6, 0x0000, 0), /* MX6Q_PAD_NANDF_CS2__IPU2_SISG_0 */ + IMX_PIN_REG(MX6Q_PAD_NANDF_CS3, 0x06D8, 0x02F0, 0, 0x0000, 0), /* MX6Q_PAD_NANDF_CS3__RAWNAND_CE3N */ + IMX_PIN_REG(MX6Q_PAD_NANDF_CS3, 0x06D8, 0x02F0, 1, 0x0000, 0), /* MX6Q_PAD_NANDF_CS3__IPU1_SISG_1 */ + IMX_PIN_REG(MX6Q_PAD_NANDF_CS3, 0x06D8, 0x02F0, 2, 0x0878, 1), /* MX6Q_PAD_NANDF_CS3__ESAI1_TX1 */ + IMX_PIN_REG(MX6Q_PAD_NANDF_CS3, 0x06D8, 0x02F0, 3, 0x0000, 0), /* MX6Q_PAD_NANDF_CS3__WEIM_WEIM_A_26 */ + IMX_PIN_REG(MX6Q_PAD_NANDF_CS3, 0x06D8, 0x02F0, 4, 0x0000, 0), /* MX6Q_PAD_NANDF_CS3__PCIE_CTRL_MUX_4 */ + IMX_PIN_REG(MX6Q_PAD_NANDF_CS3, 0x06D8, 0x02F0, 5, 0x0000, 0), /* MX6Q_PAD_NANDF_CS3__GPIO_6_16 */ + IMX_PIN_REG(MX6Q_PAD_NANDF_CS3, 0x06D8, 0x02F0, 6, 0x0000, 0), /* MX6Q_PAD_NANDF_CS3__IPU2_SISG_1 */ + IMX_PIN_REG(MX6Q_PAD_NANDF_CS3, 0x06D8, 0x02F0, 7, 0x0000, 0), /* MX6Q_PAD_NANDF_CS3__TPSMP_CLK */ + IMX_PIN_REG(MX6Q_PAD_SD4_CMD, 0x06DC, 0x02F4, 0, 0x0000, 0), /* MX6Q_PAD_SD4_CMD__USDHC4_CMD */ + IMX_PIN_REG(MX6Q_PAD_SD4_CMD, 0x06DC, 0x02F4, 1, 0x0000, 0), /* MX6Q_PAD_SD4_CMD__RAWNAND_RDN */ + IMX_PIN_REG(MX6Q_PAD_SD4_CMD, 0x06DC, 0x02F4, 2, 0x0000, 0), /* MX6Q_PAD_SD4_CMD__UART3_TXD */ + IMX_PIN_REG(MX6Q_PAD_SD4_CMD, 0x06DC, 0x02F4, 4, 0x0000, 0), /* MX6Q_PAD_SD4_CMD__PCIE_CTRL_MUX_5 */ + IMX_PIN_REG(MX6Q_PAD_SD4_CMD, 0x06DC, 0x02F4, 5, 0x0000, 0), /* MX6Q_PAD_SD4_CMD__GPIO_7_9 */ + IMX_PIN_REG(MX6Q_PAD_SD4_CMD, 0x06DC, 0x02F4, 7, 0x0000, 0), /* MX6Q_PAD_SD4_CMD__TPSMP_HDATA_DIR */ + IMX_PIN_REG(MX6Q_PAD_SD4_CLK, 0x06E0, 0x02F8, 0, 0x0000, 0), /* MX6Q_PAD_SD4_CLK__USDHC4_CLK */ + IMX_PIN_REG(MX6Q_PAD_SD4_CLK, 0x06E0, 0x02F8, 1, 0x0000, 0), /* MX6Q_PAD_SD4_CLK__RAWNAND_WRN */ + IMX_PIN_REG(MX6Q_PAD_SD4_CLK, 0x06E0, 0x02F8, 2, 0x0930, 3), /* MX6Q_PAD_SD4_CLK__UART3_RXD */ + IMX_PIN_REG(MX6Q_PAD_SD4_CLK, 0x06E0, 0x02F8, 4, 0x0000, 0), /* MX6Q_PAD_SD4_CLK__PCIE_CTRL_MUX_6 */ + IMX_PIN_REG(MX6Q_PAD_SD4_CLK, 0x06E0, 0x02F8, 5, 0x0000, 0), /* MX6Q_PAD_SD4_CLK__GPIO_7_10 */ + IMX_PIN_REG(MX6Q_PAD_NANDF_D0, 0x06E4, 0x02FC, 0, 0x0000, 0), /* MX6Q_PAD_NANDF_D0__RAWNAND_D0 */ + IMX_PIN_REG(MX6Q_PAD_NANDF_D0, 0x06E4, 0x02FC, 1, 0x0000, 0), /* MX6Q_PAD_NANDF_D0__USDHC1_DAT4 */ + IMX_PIN_REG(MX6Q_PAD_NANDF_D0, 0x06E4, 0x02FC, 2, 0x0000, 0), /* MX6Q_PAD_NANDF_D0__GPU3D_GPU_DBG_OUT_0 */ + IMX_PIN_REG(MX6Q_PAD_NANDF_D0, 0x06E4, 0x02FC, 3, 0x0000, 0), /* MX6Q_PAD_NANDF_D0__USBOH3_UH2_DFD_OUT16 */ + IMX_PIN_REG(MX6Q_PAD_NANDF_D0, 0x06E4, 0x02FC, 4, 0x0000, 0), /* MX6Q_PAD_NANDF_D0__USBOH3_UH3_DFD_OUT16 */ + IMX_PIN_REG(MX6Q_PAD_NANDF_D0, 0x06E4, 0x02FC, 5, 0x0000, 0), /* MX6Q_PAD_NANDF_D0__GPIO_2_0 */ + IMX_PIN_REG(MX6Q_PAD_NANDF_D0, 0x06E4, 0x02FC, 6, 0x0000, 0), /* MX6Q_PAD_NANDF_D0__IPU1_IPU_DIAG_BUS_0 */ + IMX_PIN_REG(MX6Q_PAD_NANDF_D0, 0x06E4, 0x02FC, 7, 0x0000, 0), /* MX6Q_PAD_NANDF_D0__IPU2_IPU_DIAG_BUS_0 */ + IMX_PIN_REG(MX6Q_PAD_NANDF_D1, 0x06E8, 0x0300, 0, 0x0000, 0), /* MX6Q_PAD_NANDF_D1__RAWNAND_D1 */ + IMX_PIN_REG(MX6Q_PAD_NANDF_D1, 0x06E8, 0x0300, 1, 0x0000, 0), /* MX6Q_PAD_NANDF_D1__USDHC1_DAT5 */ + IMX_PIN_REG(MX6Q_PAD_NANDF_D1, 0x06E8, 0x0300, 2, 0x0000, 0), /* MX6Q_PAD_NANDF_D1__GPU3D_GPU_DEBUG_OUT1 */ + IMX_PIN_REG(MX6Q_PAD_NANDF_D1, 0x06E8, 0x0300, 3, 0x0000, 0), /* MX6Q_PAD_NANDF_D1__USBOH3_UH2_DFD_OUT17 */ + IMX_PIN_REG(MX6Q_PAD_NANDF_D1, 0x06E8, 0x0300, 4, 0x0000, 0), /* MX6Q_PAD_NANDF_D1__USBOH3_UH3_DFD_OUT17 */ + IMX_PIN_REG(MX6Q_PAD_NANDF_D1, 0x06E8, 0x0300, 5, 0x0000, 0), /* MX6Q_PAD_NANDF_D1__GPIO_2_1 */ + IMX_PIN_REG(MX6Q_PAD_NANDF_D1, 0x06E8, 0x0300, 6, 0x0000, 0), /* MX6Q_PAD_NANDF_D1__IPU1_IPU_DIAG_BUS_1 */ + IMX_PIN_REG(MX6Q_PAD_NANDF_D1, 0x06E8, 0x0300, 7, 0x0000, 0), /* MX6Q_PAD_NANDF_D1__IPU2_IPU_DIAG_BUS_1 */ + IMX_PIN_REG(MX6Q_PAD_NANDF_D2, 0x06EC, 0x0304, 0, 0x0000, 0), /* MX6Q_PAD_NANDF_D2__RAWNAND_D2 */ + IMX_PIN_REG(MX6Q_PAD_NANDF_D2, 0x06EC, 0x0304, 1, 0x0000, 0), /* MX6Q_PAD_NANDF_D2__USDHC1_DAT6 */ + IMX_PIN_REG(MX6Q_PAD_NANDF_D2, 0x06EC, 0x0304, 2, 0x0000, 0), /* MX6Q_PAD_NANDF_D2__GPU3D_GPU_DBG_OUT_2 */ + IMX_PIN_REG(MX6Q_PAD_NANDF_D2, 0x06EC, 0x0304, 3, 0x0000, 0), /* MX6Q_PAD_NANDF_D2__USBOH3_UH2_DFD_OUT18 */ + IMX_PIN_REG(MX6Q_PAD_NANDF_D2, 0x06EC, 0x0304, 4, 0x0000, 0), /* MX6Q_PAD_NANDF_D2__USBOH3_UH3_DFD_OUT18 */ + IMX_PIN_REG(MX6Q_PAD_NANDF_D2, 0x06EC, 0x0304, 5, 0x0000, 0), /* MX6Q_PAD_NANDF_D2__GPIO_2_2 */ + IMX_PIN_REG(MX6Q_PAD_NANDF_D2, 0x06EC, 0x0304, 6, 0x0000, 0), /* MX6Q_PAD_NANDF_D2__IPU1_IPU_DIAG_BUS_2 */ + IMX_PIN_REG(MX6Q_PAD_NANDF_D2, 0x06EC, 0x0304, 7, 0x0000, 0), /* MX6Q_PAD_NANDF_D2__IPU2_IPU_DIAG_BUS_2 */ + IMX_PIN_REG(MX6Q_PAD_NANDF_D3, 0x06F0, 0x0308, 0, 0x0000, 0), /* MX6Q_PAD_NANDF_D3__RAWNAND_D3 */ + IMX_PIN_REG(MX6Q_PAD_NANDF_D3, 0x06F0, 0x0308, 1, 0x0000, 0), /* MX6Q_PAD_NANDF_D3__USDHC1_DAT7 */ + IMX_PIN_REG(MX6Q_PAD_NANDF_D3, 0x06F0, 0x0308, 2, 0x0000, 0), /* MX6Q_PAD_NANDF_D3__GPU3D_GPU_DBG_OUT_3 */ + IMX_PIN_REG(MX6Q_PAD_NANDF_D3, 0x06F0, 0x0308, 3, 0x0000, 0), /* MX6Q_PAD_NANDF_D3__USBOH3_UH2_DFD_OUT19 */ + IMX_PIN_REG(MX6Q_PAD_NANDF_D3, 0x06F0, 0x0308, 4, 0x0000, 0), /* MX6Q_PAD_NANDF_D3__USBOH3_UH3_DFD_OUT19 */ + IMX_PIN_REG(MX6Q_PAD_NANDF_D3, 0x06F0, 0x0308, 5, 0x0000, 0), /* MX6Q_PAD_NANDF_D3__GPIO_2_3 */ + IMX_PIN_REG(MX6Q_PAD_NANDF_D3, 0x06F0, 0x0308, 6, 0x0000, 0), /* MX6Q_PAD_NANDF_D3__IPU1_IPU_DIAG_BUS_3 */ + IMX_PIN_REG(MX6Q_PAD_NANDF_D3, 0x06F0, 0x0308, 7, 0x0000, 0), /* MX6Q_PAD_NANDF_D3__IPU2_IPU_DIAG_BUS_3 */ + IMX_PIN_REG(MX6Q_PAD_NANDF_D4, 0x06F4, 0x030C, 0, 0x0000, 0), /* MX6Q_PAD_NANDF_D4__RAWNAND_D4 */ + IMX_PIN_REG(MX6Q_PAD_NANDF_D4, 0x06F4, 0x030C, 1, 0x0000, 0), /* MX6Q_PAD_NANDF_D4__USDHC2_DAT4 */ + IMX_PIN_REG(MX6Q_PAD_NANDF_D4, 0x06F4, 0x030C, 2, 0x0000, 0), /* MX6Q_PAD_NANDF_D4__GPU3D_GPU_DBG_OUT_4 */ + IMX_PIN_REG(MX6Q_PAD_NANDF_D4, 0x06F4, 0x030C, 3, 0x0000, 0), /* MX6Q_PAD_NANDF_D4__USBOH3_UH2_DFD_OUT20 */ + IMX_PIN_REG(MX6Q_PAD_NANDF_D4, 0x06F4, 0x030C, 4, 0x0000, 0), /* MX6Q_PAD_NANDF_D4__USBOH3_UH3_DFD_OUT20 */ + IMX_PIN_REG(MX6Q_PAD_NANDF_D4, 0x06F4, 0x030C, 5, 0x0000, 0), /* MX6Q_PAD_NANDF_D4__GPIO_2_4 */ + IMX_PIN_REG(MX6Q_PAD_NANDF_D4, 0x06F4, 0x030C, 6, 0x0000, 0), /* MX6Q_PAD_NANDF_D4__IPU1_IPU_DIAG_BUS_4 */ + IMX_PIN_REG(MX6Q_PAD_NANDF_D4, 0x06F4, 0x030C, 7, 0x0000, 0), /* MX6Q_PAD_NANDF_D4__IPU2_IPU_DIAG_BUS_4 */ + IMX_PIN_REG(MX6Q_PAD_NANDF_D5, 0x06F8, 0x0310, 0, 0x0000, 0), /* MX6Q_PAD_NANDF_D5__RAWNAND_D5 */ + IMX_PIN_REG(MX6Q_PAD_NANDF_D5, 0x06F8, 0x0310, 1, 0x0000, 0), /* MX6Q_PAD_NANDF_D5__USDHC2_DAT5 */ + IMX_PIN_REG(MX6Q_PAD_NANDF_D5, 0x06F8, 0x0310, 2, 0x0000, 0), /* MX6Q_PAD_NANDF_D5__GPU3D_GPU_DBG_OUT_5 */ + IMX_PIN_REG(MX6Q_PAD_NANDF_D5, 0x06F8, 0x0310, 3, 0x0000, 0), /* MX6Q_PAD_NANDF_D5__USBOH3_UH2_DFD_OUT21 */ + IMX_PIN_REG(MX6Q_PAD_NANDF_D5, 0x06F8, 0x0310, 4, 0x0000, 0), /* MX6Q_PAD_NANDF_D5__USBOH3_UH3_DFD_OUT21 */ + IMX_PIN_REG(MX6Q_PAD_NANDF_D5, 0x06F8, 0x0310, 5, 0x0000, 0), /* MX6Q_PAD_NANDF_D5__GPIO_2_5 */ + IMX_PIN_REG(MX6Q_PAD_NANDF_D5, 0x06F8, 0x0310, 6, 0x0000, 0), /* MX6Q_PAD_NANDF_D5__IPU1_IPU_DIAG_BUS_5 */ + IMX_PIN_REG(MX6Q_PAD_NANDF_D5, 0x06F8, 0x0310, 7, 0x0000, 0), /* MX6Q_PAD_NANDF_D5__IPU2_IPU_DIAG_BUS_5 */ + IMX_PIN_REG(MX6Q_PAD_NANDF_D6, 0x06FC, 0x0314, 0, 0x0000, 0), /* MX6Q_PAD_NANDF_D6__RAWNAND_D6 */ + IMX_PIN_REG(MX6Q_PAD_NANDF_D6, 0x06FC, 0x0314, 1, 0x0000, 0), /* MX6Q_PAD_NANDF_D6__USDHC2_DAT6 */ + IMX_PIN_REG(MX6Q_PAD_NANDF_D6, 0x06FC, 0x0314, 2, 0x0000, 0), /* MX6Q_PAD_NANDF_D6__GPU3D_GPU_DBG_OUT_6 */ + IMX_PIN_REG(MX6Q_PAD_NANDF_D6, 0x06FC, 0x0314, 3, 0x0000, 0), /* MX6Q_PAD_NANDF_D6__USBOH3_UH2_DFD_OUT22 */ + IMX_PIN_REG(MX6Q_PAD_NANDF_D6, 0x06FC, 0x0314, 4, 0x0000, 0), /* MX6Q_PAD_NANDF_D6__USBOH3_UH3_DFD_OUT22 */ + IMX_PIN_REG(MX6Q_PAD_NANDF_D6, 0x06FC, 0x0314, 5, 0x0000, 0), /* MX6Q_PAD_NANDF_D6__GPIO_2_6 */ + IMX_PIN_REG(MX6Q_PAD_NANDF_D6, 0x06FC, 0x0314, 6, 0x0000, 0), /* MX6Q_PAD_NANDF_D6__IPU1_IPU_DIAG_BUS_6 */ + IMX_PIN_REG(MX6Q_PAD_NANDF_D6, 0x06FC, 0x0314, 7, 0x0000, 0), /* MX6Q_PAD_NANDF_D6__IPU2_IPU_DIAG_BUS_6 */ + IMX_PIN_REG(MX6Q_PAD_NANDF_D7, 0x0700, 0x0318, 0, 0x0000, 0), /* MX6Q_PAD_NANDF_D7__RAWNAND_D7 */ + IMX_PIN_REG(MX6Q_PAD_NANDF_D7, 0x0700, 0x0318, 1, 0x0000, 0), /* MX6Q_PAD_NANDF_D7__USDHC2_DAT7 */ + IMX_PIN_REG(MX6Q_PAD_NANDF_D7, 0x0700, 0x0318, 2, 0x0000, 0), /* MX6Q_PAD_NANDF_D7__GPU3D_GPU_DBG_OUT_7 */ + IMX_PIN_REG(MX6Q_PAD_NANDF_D7, 0x0700, 0x0318, 3, 0x0000, 0), /* MX6Q_PAD_NANDF_D7__USBOH3_UH2_DFD_OUT23 */ + IMX_PIN_REG(MX6Q_PAD_NANDF_D7, 0x0700, 0x0318, 4, 0x0000, 0), /* MX6Q_PAD_NANDF_D7__USBOH3_UH3_DFD_OUT23 */ + IMX_PIN_REG(MX6Q_PAD_NANDF_D7, 0x0700, 0x0318, 5, 0x0000, 0), /* MX6Q_PAD_NANDF_D7__GPIO_2_7 */ + IMX_PIN_REG(MX6Q_PAD_NANDF_D7, 0x0700, 0x0318, 6, 0x0000, 0), /* MX6Q_PAD_NANDF_D7__IPU1_IPU_DIAG_BUS_7 */ + IMX_PIN_REG(MX6Q_PAD_NANDF_D7, 0x0700, 0x0318, 7, 0x0000, 0), /* MX6Q_PAD_NANDF_D7__IPU2_IPU_DIAG_BUS_7 */ + IMX_PIN_REG(MX6Q_PAD_SD4_DAT0, 0x0704, 0x031C, 0, 0x0000, 0), /* MX6Q_PAD_SD4_DAT0__RAWNAND_D8 */ + IMX_PIN_REG(MX6Q_PAD_SD4_DAT0, 0x0704, 0x031C, 1, 0x0000, 0), /* MX6Q_PAD_SD4_DAT0__USDHC4_DAT0 */ + IMX_PIN_REG(MX6Q_PAD_SD4_DAT0, 0x0704, 0x031C, 2, 0x0000, 0), /* MX6Q_PAD_SD4_DAT0__RAWNAND_DQS */ + IMX_PIN_REG(MX6Q_PAD_SD4_DAT0, 0x0704, 0x031C, 3, 0x0000, 0), /* MX6Q_PAD_SD4_DAT0__USBOH3_UH2_DFD_OUT24 */ + IMX_PIN_REG(MX6Q_PAD_SD4_DAT0, 0x0704, 0x031C, 4, 0x0000, 0), /* MX6Q_PAD_SD4_DAT0__USBOH3_UH3_DFD_OUT24 */ + IMX_PIN_REG(MX6Q_PAD_SD4_DAT0, 0x0704, 0x031C, 5, 0x0000, 0), /* MX6Q_PAD_SD4_DAT0__GPIO_2_8 */ + IMX_PIN_REG(MX6Q_PAD_SD4_DAT0, 0x0704, 0x031C, 6, 0x0000, 0), /* MX6Q_PAD_SD4_DAT0__IPU1_IPU_DIAG_BUS_8 */ + IMX_PIN_REG(MX6Q_PAD_SD4_DAT0, 0x0704, 0x031C, 7, 0x0000, 0), /* MX6Q_PAD_SD4_DAT0__IPU2_IPU_DIAG_BUS_8 */ + IMX_PIN_REG(MX6Q_PAD_SD4_DAT1, 0x0708, 0x0320, 0, 0x0000, 0), /* MX6Q_PAD_SD4_DAT1__RAWNAND_D9 */ + IMX_PIN_REG(MX6Q_PAD_SD4_DAT1, 0x0708, 0x0320, 1, 0x0000, 0), /* MX6Q_PAD_SD4_DAT1__USDHC4_DAT1 */ + IMX_PIN_REG(MX6Q_PAD_SD4_DAT1, 0x0708, 0x0320, 2, 0x0000, 0), /* MX6Q_PAD_SD4_DAT1__PWM3_PWMO */ + IMX_PIN_REG(MX6Q_PAD_SD4_DAT1, 0x0708, 0x0320, 3, 0x0000, 0), /* MX6Q_PAD_SD4_DAT1__USBOH3_UH2_DFD_OUT25 */ + IMX_PIN_REG(MX6Q_PAD_SD4_DAT1, 0x0708, 0x0320, 4, 0x0000, 0), /* MX6Q_PAD_SD4_DAT1__USBOH3_UH3_DFD_OUT25 */ + IMX_PIN_REG(MX6Q_PAD_SD4_DAT1, 0x0708, 0x0320, 5, 0x0000, 0), /* MX6Q_PAD_SD4_DAT1__GPIO_2_9 */ + IMX_PIN_REG(MX6Q_PAD_SD4_DAT1, 0x0708, 0x0320, 6, 0x0000, 0), /* MX6Q_PAD_SD4_DAT1__IPU1_IPU_DIAG_BUS_9 */ + IMX_PIN_REG(MX6Q_PAD_SD4_DAT1, 0x0708, 0x0320, 7, 0x0000, 0), /* MX6Q_PAD_SD4_DAT1__IPU2_IPU_DIAG_BUS_9 */ + IMX_PIN_REG(MX6Q_PAD_SD4_DAT2, 0x070C, 0x0324, 0, 0x0000, 0), /* MX6Q_PAD_SD4_DAT2__RAWNAND_D10 */ + IMX_PIN_REG(MX6Q_PAD_SD4_DAT2, 0x070C, 0x0324, 1, 0x0000, 0), /* MX6Q_PAD_SD4_DAT2__USDHC4_DAT2 */ + IMX_PIN_REG(MX6Q_PAD_SD4_DAT2, 0x070C, 0x0324, 2, 0x0000, 0), /* MX6Q_PAD_SD4_DAT2__PWM4_PWMO */ + IMX_PIN_REG(MX6Q_PAD_SD4_DAT2, 0x070C, 0x0324, 3, 0x0000, 0), /* MX6Q_PAD_SD4_DAT2__USBOH3_UH2_DFD_OUT26 */ + IMX_PIN_REG(MX6Q_PAD_SD4_DAT2, 0x070C, 0x0324, 4, 0x0000, 0), /* MX6Q_PAD_SD4_DAT2__USBOH3_UH3_DFD_OUT26 */ + IMX_PIN_REG(MX6Q_PAD_SD4_DAT2, 0x070C, 0x0324, 5, 0x0000, 0), /* MX6Q_PAD_SD4_DAT2__GPIO_2_10 */ + IMX_PIN_REG(MX6Q_PAD_SD4_DAT2, 0x070C, 0x0324, 6, 0x0000, 0), /* MX6Q_PAD_SD4_DAT2__IPU1_IPU_DIAG_BUS_10 */ + IMX_PIN_REG(MX6Q_PAD_SD4_DAT2, 0x070C, 0x0324, 7, 0x0000, 0), /* MX6Q_PAD_SD4_DAT2__IPU2_IPU_DIAG_BUS_10 */ + IMX_PIN_REG(MX6Q_PAD_SD4_DAT3, 0x0710, 0x0328, 0, 0x0000, 0), /* MX6Q_PAD_SD4_DAT3__RAWNAND_D11 */ + IMX_PIN_REG(MX6Q_PAD_SD4_DAT3, 0x0710, 0x0328, 1, 0x0000, 0), /* MX6Q_PAD_SD4_DAT3__USDHC4_DAT3 */ + IMX_PIN_REG(MX6Q_PAD_SD4_DAT3, 0x0710, 0x0328, 3, 0x0000, 0), /* MX6Q_PAD_SD4_DAT3__USBOH3_UH2_DFD_OUT27 */ + IMX_PIN_REG(MX6Q_PAD_SD4_DAT3, 0x0710, 0x0328, 4, 0x0000, 0), /* MX6Q_PAD_SD4_DAT3__USBOH3_UH3_DFD_OUT27 */ + IMX_PIN_REG(MX6Q_PAD_SD4_DAT3, 0x0710, 0x0328, 5, 0x0000, 0), /* MX6Q_PAD_SD4_DAT3__GPIO_2_11 */ + IMX_PIN_REG(MX6Q_PAD_SD4_DAT3, 0x0710, 0x0328, 6, 0x0000, 0), /* MX6Q_PAD_SD4_DAT3__IPU1_IPU_DIAG_BUS_11 */ + IMX_PIN_REG(MX6Q_PAD_SD4_DAT3, 0x0710, 0x0328, 7, 0x0000, 0), /* MX6Q_PAD_SD4_DAT3__IPU2_IPU_DIAG_BUS_11 */ + IMX_PIN_REG(MX6Q_PAD_SD4_DAT4, 0x0714, 0x032C, 0, 0x0000, 0), /* MX6Q_PAD_SD4_DAT4__RAWNAND_D12 */ + IMX_PIN_REG(MX6Q_PAD_SD4_DAT4, 0x0714, 0x032C, 1, 0x0000, 0), /* MX6Q_PAD_SD4_DAT4__USDHC4_DAT4 */ + IMX_PIN_REG(MX6Q_PAD_SD4_DAT4, 0x0714, 0x032C, 2, 0x0928, 6), /* MX6Q_PAD_SD4_DAT4__UART2_RXD */ + IMX_PIN_REG(MX6Q_PAD_SD4_DAT4, 0x0714, 0x032C, 3, 0x0000, 0), /* MX6Q_PAD_SD4_DAT4__USBOH3_UH2_DFD_OUT28 */ + IMX_PIN_REG(MX6Q_PAD_SD4_DAT4, 0x0714, 0x032C, 4, 0x0000, 0), /* MX6Q_PAD_SD4_DAT4__USBOH3_UH3_DFD_OUT28 */ + IMX_PIN_REG(MX6Q_PAD_SD4_DAT4, 0x0714, 0x032C, 5, 0x0000, 0), /* MX6Q_PAD_SD4_DAT4__GPIO_2_12 */ + IMX_PIN_REG(MX6Q_PAD_SD4_DAT4, 0x0714, 0x032C, 6, 0x0000, 0), /* MX6Q_PAD_SD4_DAT4__IPU1_IPU_DIAG_BUS_12 */ + IMX_PIN_REG(MX6Q_PAD_SD4_DAT4, 0x0714, 0x032C, 7, 0x0000, 0), /* MX6Q_PAD_SD4_DAT4__IPU2_IPU_DIAG_BUS_12 */ + IMX_PIN_REG(MX6Q_PAD_SD4_DAT5, 0x0718, 0x0330, 0, 0x0000, 0), /* MX6Q_PAD_SD4_DAT5__RAWNAND_D13 */ + IMX_PIN_REG(MX6Q_PAD_SD4_DAT5, 0x0718, 0x0330, 1, 0x0000, 0), /* MX6Q_PAD_SD4_DAT5__USDHC4_DAT5 */ + IMX_PIN_REG(MX6Q_PAD_SD4_DAT5, 0x0718, 0x0330, 2, 0x0924, 4), /* MX6Q_PAD_SD4_DAT5__UART2_RTS */ + IMX_PIN_REG(MX6Q_PAD_SD4_DAT5, 0x0718, 0x0330, 3, 0x0000, 0), /* MX6Q_PAD_SD4_DAT5__USBOH3_UH2_DFD_OUT29 */ + IMX_PIN_REG(MX6Q_PAD_SD4_DAT5, 0x0718, 0x0330, 4, 0x0000, 0), /* MX6Q_PAD_SD4_DAT5__USBOH3_UH3_DFD_OUT29 */ + IMX_PIN_REG(MX6Q_PAD_SD4_DAT5, 0x0718, 0x0330, 5, 0x0000, 0), /* MX6Q_PAD_SD4_DAT5__GPIO_2_13 */ + IMX_PIN_REG(MX6Q_PAD_SD4_DAT5, 0x0718, 0x0330, 6, 0x0000, 0), /* MX6Q_PAD_SD4_DAT5__IPU1_IPU_DIAG_BUS_13 */ + IMX_PIN_REG(MX6Q_PAD_SD4_DAT5, 0x0718, 0x0330, 7, 0x0000, 0), /* MX6Q_PAD_SD4_DAT5__IPU2_IPU_DIAG_BUS_13 */ + IMX_PIN_REG(MX6Q_PAD_SD4_DAT6, 0x071C, 0x0334, 0, 0x0000, 0), /* MX6Q_PAD_SD4_DAT6__RAWNAND_D14 */ + IMX_PIN_REG(MX6Q_PAD_SD4_DAT6, 0x071C, 0x0334, 1, 0x0000, 0), /* MX6Q_PAD_SD4_DAT6__USDHC4_DAT6 */ + IMX_PIN_REG(MX6Q_PAD_SD4_DAT6, 0x071C, 0x0334, 2, 0x0924, 5), /* MX6Q_PAD_SD4_DAT6__UART2_CTS */ + IMX_PIN_REG(MX6Q_PAD_SD4_DAT6, 0x071C, 0x0334, 3, 0x0000, 0), /* MX6Q_PAD_SD4_DAT6__USBOH3_UH2_DFD_OUT30 */ + IMX_PIN_REG(MX6Q_PAD_SD4_DAT6, 0x071C, 0x0334, 4, 0x0000, 0), /* MX6Q_PAD_SD4_DAT6__USBOH3_UH3_DFD_OUT30 */ + IMX_PIN_REG(MX6Q_PAD_SD4_DAT6, 0x071C, 0x0334, 5, 0x0000, 0), /* MX6Q_PAD_SD4_DAT6__GPIO_2_14 */ + IMX_PIN_REG(MX6Q_PAD_SD4_DAT6, 0x071C, 0x0334, 6, 0x0000, 0), /* MX6Q_PAD_SD4_DAT6__IPU1_IPU_DIAG_BUS_14 */ + IMX_PIN_REG(MX6Q_PAD_SD4_DAT6, 0x071C, 0x0334, 7, 0x0000, 0), /* MX6Q_PAD_SD4_DAT6__IPU2_IPU_DIAG_BUS_14 */ + IMX_PIN_REG(MX6Q_PAD_SD4_DAT7, 0x0720, 0x0338, 0, 0x0000, 0), /* MX6Q_PAD_SD4_DAT7__RAWNAND_D15 */ + IMX_PIN_REG(MX6Q_PAD_SD4_DAT7, 0x0720, 0x0338, 1, 0x0000, 0), /* MX6Q_PAD_SD4_DAT7__USDHC4_DAT7 */ + IMX_PIN_REG(MX6Q_PAD_SD4_DAT7, 0x0720, 0x0338, 2, 0x0000, 0), /* MX6Q_PAD_SD4_DAT7__UART2_TXD */ + IMX_PIN_REG(MX6Q_PAD_SD4_DAT7, 0x0720, 0x0338, 3, 0x0000, 0), /* MX6Q_PAD_SD4_DAT7__USBOH3_UH2_DFD_OUT31 */ + IMX_PIN_REG(MX6Q_PAD_SD4_DAT7, 0x0720, 0x0338, 4, 0x0000, 0), /* MX6Q_PAD_SD4_DAT7__USBOH3_UH3_DFD_OUT31 */ + IMX_PIN_REG(MX6Q_PAD_SD4_DAT7, 0x0720, 0x0338, 5, 0x0000, 0), /* MX6Q_PAD_SD4_DAT7__GPIO_2_15 */ + IMX_PIN_REG(MX6Q_PAD_SD4_DAT7, 0x0720, 0x0338, 6, 0x0000, 0), /* MX6Q_PAD_SD4_DAT7__IPU1_IPU_DIAG_BUS_15 */ + IMX_PIN_REG(MX6Q_PAD_SD4_DAT7, 0x0720, 0x0338, 7, 0x0000, 0), /* MX6Q_PAD_SD4_DAT7__IPU2_IPU_DIAG_BUS_15 */ + IMX_PIN_REG(MX6Q_PAD_SD1_DAT1, 0x0724, 0x033C, 0, 0x0000, 0), /* MX6Q_PAD_SD1_DAT1__USDHC1_DAT1 */ + IMX_PIN_REG(MX6Q_PAD_SD1_DAT1, 0x0724, 0x033C, 1, 0x0834, 1), /* MX6Q_PAD_SD1_DAT1__ECSPI5_SS0 */ + IMX_PIN_REG(MX6Q_PAD_SD1_DAT1, 0x0724, 0x033C, 2, 0x0000, 0), /* MX6Q_PAD_SD1_DAT1__PWM3_PWMO */ + IMX_PIN_REG(MX6Q_PAD_SD1_DAT1, 0x0724, 0x033C, 3, 0x0000, 0), /* MX6Q_PAD_SD1_DAT1__GPT_CAPIN2 */ + IMX_PIN_REG(MX6Q_PAD_SD1_DAT1, 0x0724, 0x033C, 4, 0x0000, 0), /* MX6Q_PAD_SD1_DAT1__PCIE_CTRL_MUX_7 */ + IMX_PIN_REG(MX6Q_PAD_SD1_DAT1, 0x0724, 0x033C, 5, 0x0000, 0), /* MX6Q_PAD_SD1_DAT1__GPIO_1_17 */ + IMX_PIN_REG(MX6Q_PAD_SD1_DAT1, 0x0724, 0x033C, 6, 0x0000, 0), /* MX6Q_PAD_SD1_DAT1__HDMI_TX_OPHYDTB_0 */ + IMX_PIN_REG(MX6Q_PAD_SD1_DAT1, 0x0724, 0x033C, 7, 0x0000, 0), /* MX6Q_PAD_SD1_DAT1__ANATOP_TESTO_8 */ + IMX_PIN_REG(MX6Q_PAD_SD1_DAT0, 0x0728, 0x0340, 0, 0x0000, 0), /* MX6Q_PAD_SD1_DAT0__USDHC1_DAT0 */ + IMX_PIN_REG(MX6Q_PAD_SD1_DAT0, 0x0728, 0x0340, 1, 0x082C, 1), /* MX6Q_PAD_SD1_DAT0__ECSPI5_MISO */ + IMX_PIN_REG(MX6Q_PAD_SD1_DAT0, 0x0728, 0x0340, 2, 0x0000, 0), /* MX6Q_PAD_SD1_DAT0__CAAM_WRAP_RNG_OSCOBS */ + IMX_PIN_REG(MX6Q_PAD_SD1_DAT0, 0x0728, 0x0340, 3, 0x0000, 0), /* MX6Q_PAD_SD1_DAT0__GPT_CAPIN1 */ + IMX_PIN_REG(MX6Q_PAD_SD1_DAT0, 0x0728, 0x0340, 4, 0x0000, 0), /* MX6Q_PAD_SD1_DAT0__PCIE_CTRL_MUX_8 */ + IMX_PIN_REG(MX6Q_PAD_SD1_DAT0, 0x0728, 0x0340, 5, 0x0000, 0), /* MX6Q_PAD_SD1_DAT0__GPIO_1_16 */ + IMX_PIN_REG(MX6Q_PAD_SD1_DAT0, 0x0728, 0x0340, 6, 0x0000, 0), /* MX6Q_PAD_SD1_DAT0__HDMI_TX_OPHYDTB_1 */ + IMX_PIN_REG(MX6Q_PAD_SD1_DAT0, 0x0728, 0x0340, 7, 0x0000, 0), /* MX6Q_PAD_SD1_DAT0__ANATOP_TESTO_7 */ + IMX_PIN_REG(MX6Q_PAD_SD1_DAT3, 0x072C, 0x0344, 0, 0x0000, 0), /* MX6Q_PAD_SD1_DAT3__USDHC1_DAT3 */ + IMX_PIN_REG(MX6Q_PAD_SD1_DAT3, 0x072C, 0x0344, 1, 0x0000, 0), /* MX6Q_PAD_SD1_DAT3__ECSPI5_SS2 */ + IMX_PIN_REG(MX6Q_PAD_SD1_DAT3, 0x072C, 0x0344, 2, 0x0000, 0), /* MX6Q_PAD_SD1_DAT3__GPT_CMPOUT3 */ + IMX_PIN_REG(MX6Q_PAD_SD1_DAT3, 0x072C, 0x0344, 3, 0x0000, 0), /* MX6Q_PAD_SD1_DAT3__PWM1_PWMO */ + IMX_PIN_REG(MX6Q_PAD_SD1_DAT3, 0x072C, 0x0344, 4, 0x0000, 0), /* MX6Q_PAD_SD1_DAT3__WDOG2_WDOG_B */ + IMX_PIN_REG(MX6Q_PAD_SD1_DAT3, 0x072C, 0x0344, 5, 0x0000, 0), /* MX6Q_PAD_SD1_DAT3__GPIO_1_21 */ + IMX_PIN_REG(MX6Q_PAD_SD1_DAT3, 0x072C, 0x0344, 6, 0x0000, 0), /* MX6Q_PAD_SD1_DAT3__WDOG2_WDOG_RST_B_DEB */ + IMX_PIN_REG(MX6Q_PAD_SD1_DAT3, 0x072C, 0x0344, 7, 0x0000, 0), /* MX6Q_PAD_SD1_DAT3__ANATOP_TESTO_6 */ + IMX_PIN_REG(MX6Q_PAD_SD1_CMD, 0x0730, 0x0348, 0, 0x0000, 0), /* MX6Q_PAD_SD1_CMD__USDHC1_CMD */ + IMX_PIN_REG(MX6Q_PAD_SD1_CMD, 0x0730, 0x0348, 1, 0x0830, 0), /* MX6Q_PAD_SD1_CMD__ECSPI5_MOSI */ + IMX_PIN_REG(MX6Q_PAD_SD1_CMD, 0x0730, 0x0348, 2, 0x0000, 0), /* MX6Q_PAD_SD1_CMD__PWM4_PWMO */ + IMX_PIN_REG(MX6Q_PAD_SD1_CMD, 0x0730, 0x0348, 3, 0x0000, 0), /* MX6Q_PAD_SD1_CMD__GPT_CMPOUT1 */ + IMX_PIN_REG(MX6Q_PAD_SD1_CMD, 0x0730, 0x0348, 5, 0x0000, 0), /* MX6Q_PAD_SD1_CMD__GPIO_1_18 */ + IMX_PIN_REG(MX6Q_PAD_SD1_CMD, 0x0730, 0x0348, 7, 0x0000, 0), /* MX6Q_PAD_SD1_CMD__ANATOP_TESTO_5 */ + IMX_PIN_REG(MX6Q_PAD_SD1_DAT2, 0x0734, 0x034C, 0, 0x0000, 0), /* MX6Q_PAD_SD1_DAT2__USDHC1_DAT2 */ + IMX_PIN_REG(MX6Q_PAD_SD1_DAT2, 0x0734, 0x034C, 1, 0x0838, 1), /* MX6Q_PAD_SD1_DAT2__ECSPI5_SS1 */ + IMX_PIN_REG(MX6Q_PAD_SD1_DAT2, 0x0734, 0x034C, 2, 0x0000, 0), /* MX6Q_PAD_SD1_DAT2__GPT_CMPOUT2 */ + IMX_PIN_REG(MX6Q_PAD_SD1_DAT2, 0x0734, 0x034C, 3, 0x0000, 0), /* MX6Q_PAD_SD1_DAT2__PWM2_PWMO */ + IMX_PIN_REG(MX6Q_PAD_SD1_DAT2, 0x0734, 0x034C, 4, 0x0000, 0), /* MX6Q_PAD_SD1_DAT2__WDOG1_WDOG_B */ + IMX_PIN_REG(MX6Q_PAD_SD1_DAT2, 0x0734, 0x034C, 5, 0x0000, 0), /* MX6Q_PAD_SD1_DAT2__GPIO_1_19 */ + IMX_PIN_REG(MX6Q_PAD_SD1_DAT2, 0x0734, 0x034C, 6, 0x0000, 0), /* MX6Q_PAD_SD1_DAT2__WDOG1_WDOG_RST_B_DEB */ + IMX_PIN_REG(MX6Q_PAD_SD1_DAT2, 0x0734, 0x034C, 7, 0x0000, 0), /* MX6Q_PAD_SD1_DAT2__ANATOP_TESTO_4 */ + IMX_PIN_REG(MX6Q_PAD_SD1_CLK, 0x0738, 0x0350, 0, 0x0000, 0), /* MX6Q_PAD_SD1_CLK__USDHC1_CLK */ + IMX_PIN_REG(MX6Q_PAD_SD1_CLK, 0x0738, 0x0350, 1, 0x0828, 0), /* MX6Q_PAD_SD1_CLK__ECSPI5_SCLK */ + IMX_PIN_REG(MX6Q_PAD_SD1_CLK, 0x0738, 0x0350, 2, 0x0000, 0), /* MX6Q_PAD_SD1_CLK__OSC32K_32K_OUT */ + IMX_PIN_REG(MX6Q_PAD_SD1_CLK, 0x0738, 0x0350, 3, 0x0000, 0), /* MX6Q_PAD_SD1_CLK__GPT_CLKIN */ + IMX_PIN_REG(MX6Q_PAD_SD1_CLK, 0x0738, 0x0350, 5, 0x0000, 0), /* MX6Q_PAD_SD1_CLK__GPIO_1_20 */ + IMX_PIN_REG(MX6Q_PAD_SD1_CLK, 0x0738, 0x0350, 6, 0x0000, 0), /* MX6Q_PAD_SD1_CLK__PHY_DTB_0 */ + IMX_PIN_REG(MX6Q_PAD_SD1_CLK, 0x0738, 0x0350, 7, 0x0000, 0), /* MX6Q_PAD_SD1_CLK__SATA_PHY_DTB_0 */ + IMX_PIN_REG(MX6Q_PAD_SD2_CLK, 0x073C, 0x0354, 0, 0x0000, 0), /* MX6Q_PAD_SD2_CLK__USDHC2_CLK */ + IMX_PIN_REG(MX6Q_PAD_SD2_CLK, 0x073C, 0x0354, 1, 0x0828, 1), /* MX6Q_PAD_SD2_CLK__ECSPI5_SCLK */ + IMX_PIN_REG(MX6Q_PAD_SD2_CLK, 0x073C, 0x0354, 2, 0x08E8, 3), /* MX6Q_PAD_SD2_CLK__KPP_COL_5 */ + IMX_PIN_REG(MX6Q_PAD_SD2_CLK, 0x073C, 0x0354, 3, 0x07C0, 1), /* MX6Q_PAD_SD2_CLK__AUDMUX_AUD4_RXFS */ + IMX_PIN_REG(MX6Q_PAD_SD2_CLK, 0x073C, 0x0354, 4, 0x0000, 0), /* MX6Q_PAD_SD2_CLK__PCIE_CTRL_MUX_9 */ + IMX_PIN_REG(MX6Q_PAD_SD2_CLK, 0x073C, 0x0354, 5, 0x0000, 0), /* MX6Q_PAD_SD2_CLK__GPIO_1_10 */ + IMX_PIN_REG(MX6Q_PAD_SD2_CLK, 0x073C, 0x0354, 6, 0x0000, 0), /* MX6Q_PAD_SD2_CLK__PHY_DTB_1 */ + IMX_PIN_REG(MX6Q_PAD_SD2_CLK, 0x073C, 0x0354, 7, 0x0000, 0), /* MX6Q_PAD_SD2_CLK__SATA_PHY_DTB_1 */ + IMX_PIN_REG(MX6Q_PAD_SD2_CMD, 0x0740, 0x0358, 0, 0x0000, 0), /* MX6Q_PAD_SD2_CMD__USDHC2_CMD */ + IMX_PIN_REG(MX6Q_PAD_SD2_CMD, 0x0740, 0x0358, 1, 0x0830, 1), /* MX6Q_PAD_SD2_CMD__ECSPI5_MOSI */ + IMX_PIN_REG(MX6Q_PAD_SD2_CMD, 0x0740, 0x0358, 2, 0x08F4, 2), /* MX6Q_PAD_SD2_CMD__KPP_ROW_5 */ + IMX_PIN_REG(MX6Q_PAD_SD2_CMD, 0x0740, 0x0358, 3, 0x07BC, 1), /* MX6Q_PAD_SD2_CMD__AUDMUX_AUD4_RXC */ + IMX_PIN_REG(MX6Q_PAD_SD2_CMD, 0x0740, 0x0358, 4, 0x0000, 0), /* MX6Q_PAD_SD2_CMD__PCIE_CTRL_MUX_10 */ + IMX_PIN_REG(MX6Q_PAD_SD2_CMD, 0x0740, 0x0358, 5, 0x0000, 0), /* MX6Q_PAD_SD2_CMD__GPIO_1_11 */ + IMX_PIN_REG(MX6Q_PAD_SD2_DAT3, 0x0744, 0x035C, 0, 0x0000, 0), /* MX6Q_PAD_SD2_DAT3__USDHC2_DAT3 */ + IMX_PIN_REG(MX6Q_PAD_SD2_DAT3, 0x0744, 0x035C, 1, 0x0000, 0), /* MX6Q_PAD_SD2_DAT3__ECSPI5_SS3 */ + IMX_PIN_REG(MX6Q_PAD_SD2_DAT3, 0x0744, 0x035C, 2, 0x08EC, 2), /* MX6Q_PAD_SD2_DAT3__KPP_COL_6 */ + IMX_PIN_REG(MX6Q_PAD_SD2_DAT3, 0x0744, 0x035C, 3, 0x07C4, 1), /* MX6Q_PAD_SD2_DAT3__AUDMUX_AUD4_TXC */ + IMX_PIN_REG(MX6Q_PAD_SD2_DAT3, 0x0744, 0x035C, 4, 0x0000, 0), /* MX6Q_PAD_SD2_DAT3__PCIE_CTRL_MUX_11 */ + IMX_PIN_REG(MX6Q_PAD_SD2_DAT3, 0x0744, 0x035C, 5, 0x0000, 0), /* MX6Q_PAD_SD2_DAT3__GPIO_1_12 */ + IMX_PIN_REG(MX6Q_PAD_SD2_DAT3, 0x0744, 0x035C, 6, 0x0000, 0), /* MX6Q_PAD_SD2_DAT3__SJC_DONE */ + IMX_PIN_REG(MX6Q_PAD_SD2_DAT3, 0x0744, 0x035C, 7, 0x0000, 0), /* MX6Q_PAD_SD2_DAT3__ANATOP_TESTO_3 */ +}; + +/* Pad names for the pinmux subsystem */ +static const struct pinctrl_pin_desc imx6q_pinctrl_pads[] = { + IMX_PINCTRL_PIN(MX6Q_PAD_SD2_DAT1), + IMX_PINCTRL_PIN(MX6Q_PAD_SD2_DAT2), + IMX_PINCTRL_PIN(MX6Q_PAD_SD2_DAT0), + IMX_PINCTRL_PIN(MX6Q_PAD_RGMII_TXC), + IMX_PINCTRL_PIN(MX6Q_PAD_RGMII_TD0), + IMX_PINCTRL_PIN(MX6Q_PAD_RGMII_TD1), + IMX_PINCTRL_PIN(MX6Q_PAD_RGMII_TD2), + IMX_PINCTRL_PIN(MX6Q_PAD_RGMII_TD3), + IMX_PINCTRL_PIN(MX6Q_PAD_RGMII_RX_CTL), + IMX_PINCTRL_PIN(MX6Q_PAD_RGMII_RD0), + IMX_PINCTRL_PIN(MX6Q_PAD_RGMII_TX_CTL), + IMX_PINCTRL_PIN(MX6Q_PAD_RGMII_RD1), + IMX_PINCTRL_PIN(MX6Q_PAD_RGMII_RD2), + IMX_PINCTRL_PIN(MX6Q_PAD_RGMII_RD3), + IMX_PINCTRL_PIN(MX6Q_PAD_RGMII_RXC), + IMX_PINCTRL_PIN(MX6Q_PAD_EIM_A25), + IMX_PINCTRL_PIN(MX6Q_PAD_EIM_EB2), + IMX_PINCTRL_PIN(MX6Q_PAD_EIM_D16), + IMX_PINCTRL_PIN(MX6Q_PAD_EIM_D17), + IMX_PINCTRL_PIN(MX6Q_PAD_EIM_D18), + IMX_PINCTRL_PIN(MX6Q_PAD_EIM_D19), + IMX_PINCTRL_PIN(MX6Q_PAD_EIM_D20), + IMX_PINCTRL_PIN(MX6Q_PAD_EIM_D21), + IMX_PINCTRL_PIN(MX6Q_PAD_EIM_D22), + IMX_PINCTRL_PIN(MX6Q_PAD_EIM_D23), + IMX_PINCTRL_PIN(MX6Q_PAD_EIM_EB3), + IMX_PINCTRL_PIN(MX6Q_PAD_EIM_D24), + IMX_PINCTRL_PIN(MX6Q_PAD_EIM_D25), + IMX_PINCTRL_PIN(MX6Q_PAD_EIM_D26), + IMX_PINCTRL_PIN(MX6Q_PAD_EIM_D27), + IMX_PINCTRL_PIN(MX6Q_PAD_EIM_D28), + IMX_PINCTRL_PIN(MX6Q_PAD_EIM_D29), + IMX_PINCTRL_PIN(MX6Q_PAD_EIM_D30), + IMX_PINCTRL_PIN(MX6Q_PAD_EIM_D31), + IMX_PINCTRL_PIN(MX6Q_PAD_EIM_A24), + IMX_PINCTRL_PIN(MX6Q_PAD_EIM_A23), + IMX_PINCTRL_PIN(MX6Q_PAD_EIM_A22), + IMX_PINCTRL_PIN(MX6Q_PAD_EIM_A21), + IMX_PINCTRL_PIN(MX6Q_PAD_EIM_A20), + IMX_PINCTRL_PIN(MX6Q_PAD_EIM_A19), + IMX_PINCTRL_PIN(MX6Q_PAD_EIM_A18), + IMX_PINCTRL_PIN(MX6Q_PAD_EIM_A17), + IMX_PINCTRL_PIN(MX6Q_PAD_EIM_A16), + IMX_PINCTRL_PIN(MX6Q_PAD_EIM_CS0), + IMX_PINCTRL_PIN(MX6Q_PAD_EIM_CS1), + IMX_PINCTRL_PIN(MX6Q_PAD_EIM_OE), + IMX_PINCTRL_PIN(MX6Q_PAD_EIM_RW), + IMX_PINCTRL_PIN(MX6Q_PAD_EIM_LBA), + IMX_PINCTRL_PIN(MX6Q_PAD_EIM_EB0), + IMX_PINCTRL_PIN(MX6Q_PAD_EIM_EB1), + IMX_PINCTRL_PIN(MX6Q_PAD_EIM_DA0), + IMX_PINCTRL_PIN(MX6Q_PAD_EIM_DA1), + IMX_PINCTRL_PIN(MX6Q_PAD_EIM_DA2), + IMX_PINCTRL_PIN(MX6Q_PAD_EIM_DA3), + IMX_PINCTRL_PIN(MX6Q_PAD_EIM_DA4), + IMX_PINCTRL_PIN(MX6Q_PAD_EIM_DA5), + IMX_PINCTRL_PIN(MX6Q_PAD_EIM_DA6), + IMX_PINCTRL_PIN(MX6Q_PAD_EIM_DA7), + IMX_PINCTRL_PIN(MX6Q_PAD_EIM_DA8), + IMX_PINCTRL_PIN(MX6Q_PAD_EIM_DA9), + IMX_PINCTRL_PIN(MX6Q_PAD_EIM_DA10), + IMX_PINCTRL_PIN(MX6Q_PAD_EIM_DA11), + IMX_PINCTRL_PIN(MX6Q_PAD_EIM_DA12), + IMX_PINCTRL_PIN(MX6Q_PAD_EIM_DA13), + IMX_PINCTRL_PIN(MX6Q_PAD_EIM_DA14), + IMX_PINCTRL_PIN(MX6Q_PAD_EIM_DA15), + IMX_PINCTRL_PIN(MX6Q_PAD_EIM_WAIT), + IMX_PINCTRL_PIN(MX6Q_PAD_EIM_BCLK), + IMX_PINCTRL_PIN(MX6Q_PAD_DI0_DISP_CLK), + IMX_PINCTRL_PIN(MX6Q_PAD_DI0_PIN15), + IMX_PINCTRL_PIN(MX6Q_PAD_DI0_PIN2), + IMX_PINCTRL_PIN(MX6Q_PAD_DI0_PIN3), + IMX_PINCTRL_PIN(MX6Q_PAD_DI0_PIN4), + IMX_PINCTRL_PIN(MX6Q_PAD_DISP0_DAT0), + IMX_PINCTRL_PIN(MX6Q_PAD_DISP0_DAT1), + IMX_PINCTRL_PIN(MX6Q_PAD_DISP0_DAT2), + IMX_PINCTRL_PIN(MX6Q_PAD_DISP0_DAT3), + IMX_PINCTRL_PIN(MX6Q_PAD_DISP0_DAT4), + IMX_PINCTRL_PIN(MX6Q_PAD_DISP0_DAT5), + IMX_PINCTRL_PIN(MX6Q_PAD_DISP0_DAT6), + IMX_PINCTRL_PIN(MX6Q_PAD_DISP0_DAT7), + IMX_PINCTRL_PIN(MX6Q_PAD_DISP0_DAT8), + IMX_PINCTRL_PIN(MX6Q_PAD_DISP0_DAT9), + IMX_PINCTRL_PIN(MX6Q_PAD_DISP0_DAT10), + IMX_PINCTRL_PIN(MX6Q_PAD_DISP0_DAT11), + IMX_PINCTRL_PIN(MX6Q_PAD_DISP0_DAT12), + IMX_PINCTRL_PIN(MX6Q_PAD_DISP0_DAT13), + IMX_PINCTRL_PIN(MX6Q_PAD_DISP0_DAT14), + IMX_PINCTRL_PIN(MX6Q_PAD_DISP0_DAT15), + IMX_PINCTRL_PIN(MX6Q_PAD_DISP0_DAT16), + IMX_PINCTRL_PIN(MX6Q_PAD_DISP0_DAT17), + IMX_PINCTRL_PIN(MX6Q_PAD_DISP0_DAT18), + IMX_PINCTRL_PIN(MX6Q_PAD_DISP0_DAT19), + IMX_PINCTRL_PIN(MX6Q_PAD_DISP0_DAT20), + IMX_PINCTRL_PIN(MX6Q_PAD_DISP0_DAT21), + IMX_PINCTRL_PIN(MX6Q_PAD_DISP0_DAT22), + IMX_PINCTRL_PIN(MX6Q_PAD_DISP0_DAT23), + IMX_PINCTRL_PIN(MX6Q_PAD_ENET_MDIO), + IMX_PINCTRL_PIN(MX6Q_PAD_ENET_REF_CLK), + IMX_PINCTRL_PIN(MX6Q_PAD_ENET_RX_ER), + IMX_PINCTRL_PIN(MX6Q_PAD_ENET_CRS_DV), + IMX_PINCTRL_PIN(MX6Q_PAD_ENET_RXD1), + IMX_PINCTRL_PIN(MX6Q_PAD_ENET_RXD0), + IMX_PINCTRL_PIN(MX6Q_PAD_ENET_TX_EN), + IMX_PINCTRL_PIN(MX6Q_PAD_ENET_TXD1), + IMX_PINCTRL_PIN(MX6Q_PAD_ENET_TXD0), + IMX_PINCTRL_PIN(MX6Q_PAD_ENET_MDC), + IMX_PINCTRL_PIN(MX6Q_PAD_DRAM_D40), + IMX_PINCTRL_PIN(MX6Q_PAD_DRAM_D41), + IMX_PINCTRL_PIN(MX6Q_PAD_DRAM_D42), + IMX_PINCTRL_PIN(MX6Q_PAD_DRAM_D43), + IMX_PINCTRL_PIN(MX6Q_PAD_DRAM_D44), + IMX_PINCTRL_PIN(MX6Q_PAD_DRAM_D45), + IMX_PINCTRL_PIN(MX6Q_PAD_DRAM_D46), + IMX_PINCTRL_PIN(MX6Q_PAD_DRAM_D47), + IMX_PINCTRL_PIN(MX6Q_PAD_DRAM_SDQS5), + IMX_PINCTRL_PIN(MX6Q_PAD_DRAM_DQM5), + IMX_PINCTRL_PIN(MX6Q_PAD_DRAM_D32), + IMX_PINCTRL_PIN(MX6Q_PAD_DRAM_D33), + IMX_PINCTRL_PIN(MX6Q_PAD_DRAM_D34), + IMX_PINCTRL_PIN(MX6Q_PAD_DRAM_D35), + IMX_PINCTRL_PIN(MX6Q_PAD_DRAM_D36), + IMX_PINCTRL_PIN(MX6Q_PAD_DRAM_D37), + IMX_PINCTRL_PIN(MX6Q_PAD_DRAM_D38), + IMX_PINCTRL_PIN(MX6Q_PAD_DRAM_D39), + IMX_PINCTRL_PIN(MX6Q_PAD_DRAM_DQM4), + IMX_PINCTRL_PIN(MX6Q_PAD_DRAM_SDQS4), + IMX_PINCTRL_PIN(MX6Q_PAD_DRAM_D24), + IMX_PINCTRL_PIN(MX6Q_PAD_DRAM_D25), + IMX_PINCTRL_PIN(MX6Q_PAD_DRAM_D26), + IMX_PINCTRL_PIN(MX6Q_PAD_DRAM_D27), + IMX_PINCTRL_PIN(MX6Q_PAD_DRAM_D28), + IMX_PINCTRL_PIN(MX6Q_PAD_DRAM_D29), + IMX_PINCTRL_PIN(MX6Q_PAD_DRAM_SDQS3), + IMX_PINCTRL_PIN(MX6Q_PAD_DRAM_D30), + IMX_PINCTRL_PIN(MX6Q_PAD_DRAM_D31), + IMX_PINCTRL_PIN(MX6Q_PAD_DRAM_DQM3), + IMX_PINCTRL_PIN(MX6Q_PAD_DRAM_D16), + IMX_PINCTRL_PIN(MX6Q_PAD_DRAM_D17), + IMX_PINCTRL_PIN(MX6Q_PAD_DRAM_D18), + IMX_PINCTRL_PIN(MX6Q_PAD_DRAM_D19), + IMX_PINCTRL_PIN(MX6Q_PAD_DRAM_D20), + IMX_PINCTRL_PIN(MX6Q_PAD_DRAM_D21), + IMX_PINCTRL_PIN(MX6Q_PAD_DRAM_D22), + IMX_PINCTRL_PIN(MX6Q_PAD_DRAM_SDQS2), + IMX_PINCTRL_PIN(MX6Q_PAD_DRAM_D23), + IMX_PINCTRL_PIN(MX6Q_PAD_DRAM_DQM2), + IMX_PINCTRL_PIN(MX6Q_PAD_DRAM_A0), + IMX_PINCTRL_PIN(MX6Q_PAD_DRAM_A1), + IMX_PINCTRL_PIN(MX6Q_PAD_DRAM_A2), + IMX_PINCTRL_PIN(MX6Q_PAD_DRAM_A3), + IMX_PINCTRL_PIN(MX6Q_PAD_DRAM_A4), + IMX_PINCTRL_PIN(MX6Q_PAD_DRAM_A5), + IMX_PINCTRL_PIN(MX6Q_PAD_DRAM_A6), + IMX_PINCTRL_PIN(MX6Q_PAD_DRAM_A7), + IMX_PINCTRL_PIN(MX6Q_PAD_DRAM_A8), + IMX_PINCTRL_PIN(MX6Q_PAD_DRAM_A9), + IMX_PINCTRL_PIN(MX6Q_PAD_DRAM_A10), + IMX_PINCTRL_PIN(MX6Q_PAD_DRAM_A11), + IMX_PINCTRL_PIN(MX6Q_PAD_DRAM_A12), + IMX_PINCTRL_PIN(MX6Q_PAD_DRAM_A13), + IMX_PINCTRL_PIN(MX6Q_PAD_DRAM_A14), + IMX_PINCTRL_PIN(MX6Q_PAD_DRAM_A15), + IMX_PINCTRL_PIN(MX6Q_PAD_DRAM_CAS), + IMX_PINCTRL_PIN(MX6Q_PAD_DRAM_CS0), + IMX_PINCTRL_PIN(MX6Q_PAD_DRAM_CS1), + IMX_PINCTRL_PIN(MX6Q_PAD_DRAM_RAS), + IMX_PINCTRL_PIN(MX6Q_PAD_DRAM_RESET), + IMX_PINCTRL_PIN(MX6Q_PAD_DRAM_SDBA0), + IMX_PINCTRL_PIN(MX6Q_PAD_DRAM_SDBA1), + IMX_PINCTRL_PIN(MX6Q_PAD_DRAM_SDCLK_0), + IMX_PINCTRL_PIN(MX6Q_PAD_DRAM_SDBA2), + IMX_PINCTRL_PIN(MX6Q_PAD_DRAM_SDCKE0), + IMX_PINCTRL_PIN(MX6Q_PAD_DRAM_SDCLK_1), + IMX_PINCTRL_PIN(MX6Q_PAD_DRAM_SDCKE1), + IMX_PINCTRL_PIN(MX6Q_PAD_DRAM_SDODT0), + IMX_PINCTRL_PIN(MX6Q_PAD_DRAM_SDODT1), + IMX_PINCTRL_PIN(MX6Q_PAD_DRAM_SDWE), + IMX_PINCTRL_PIN(MX6Q_PAD_DRAM_D0), + IMX_PINCTRL_PIN(MX6Q_PAD_DRAM_D1), + IMX_PINCTRL_PIN(MX6Q_PAD_DRAM_D2), + IMX_PINCTRL_PIN(MX6Q_PAD_DRAM_D3), + IMX_PINCTRL_PIN(MX6Q_PAD_DRAM_D4), + IMX_PINCTRL_PIN(MX6Q_PAD_DRAM_D5), + IMX_PINCTRL_PIN(MX6Q_PAD_DRAM_SDQS0), + IMX_PINCTRL_PIN(MX6Q_PAD_DRAM_D6), + IMX_PINCTRL_PIN(MX6Q_PAD_DRAM_D7), + IMX_PINCTRL_PIN(MX6Q_PAD_DRAM_DQM0), + IMX_PINCTRL_PIN(MX6Q_PAD_DRAM_D8), + IMX_PINCTRL_PIN(MX6Q_PAD_DRAM_D9), + IMX_PINCTRL_PIN(MX6Q_PAD_DRAM_D10), + IMX_PINCTRL_PIN(MX6Q_PAD_DRAM_D11), + IMX_PINCTRL_PIN(MX6Q_PAD_DRAM_D12), + IMX_PINCTRL_PIN(MX6Q_PAD_DRAM_D13), + IMX_PINCTRL_PIN(MX6Q_PAD_DRAM_D14), + IMX_PINCTRL_PIN(MX6Q_PAD_DRAM_SDQS1), + IMX_PINCTRL_PIN(MX6Q_PAD_DRAM_D15), + IMX_PINCTRL_PIN(MX6Q_PAD_DRAM_DQM1), + IMX_PINCTRL_PIN(MX6Q_PAD_DRAM_D48), + IMX_PINCTRL_PIN(MX6Q_PAD_DRAM_D49), + IMX_PINCTRL_PIN(MX6Q_PAD_DRAM_D50), + IMX_PINCTRL_PIN(MX6Q_PAD_DRAM_D51), + IMX_PINCTRL_PIN(MX6Q_PAD_DRAM_D52), + IMX_PINCTRL_PIN(MX6Q_PAD_DRAM_D53), + IMX_PINCTRL_PIN(MX6Q_PAD_DRAM_D54), + IMX_PINCTRL_PIN(MX6Q_PAD_DRAM_D55), + IMX_PINCTRL_PIN(MX6Q_PAD_DRAM_SDQS6), + IMX_PINCTRL_PIN(MX6Q_PAD_DRAM_DQM6), + IMX_PINCTRL_PIN(MX6Q_PAD_DRAM_D56), + IMX_PINCTRL_PIN(MX6Q_PAD_DRAM_SDQS7), + IMX_PINCTRL_PIN(MX6Q_PAD_DRAM_D57), + IMX_PINCTRL_PIN(MX6Q_PAD_DRAM_D58), + IMX_PINCTRL_PIN(MX6Q_PAD_DRAM_D59), + IMX_PINCTRL_PIN(MX6Q_PAD_DRAM_D60), + IMX_PINCTRL_PIN(MX6Q_PAD_DRAM_DQM7), + IMX_PINCTRL_PIN(MX6Q_PAD_DRAM_D61), + IMX_PINCTRL_PIN(MX6Q_PAD_DRAM_D62), + IMX_PINCTRL_PIN(MX6Q_PAD_DRAM_D63), + IMX_PINCTRL_PIN(MX6Q_PAD_KEY_COL0), + IMX_PINCTRL_PIN(MX6Q_PAD_KEY_ROW0), + IMX_PINCTRL_PIN(MX6Q_PAD_KEY_COL1), + IMX_PINCTRL_PIN(MX6Q_PAD_KEY_ROW1), + IMX_PINCTRL_PIN(MX6Q_PAD_KEY_COL2), + IMX_PINCTRL_PIN(MX6Q_PAD_KEY_ROW2), + IMX_PINCTRL_PIN(MX6Q_PAD_KEY_COL3), + IMX_PINCTRL_PIN(MX6Q_PAD_KEY_ROW3), + IMX_PINCTRL_PIN(MX6Q_PAD_KEY_COL4), + IMX_PINCTRL_PIN(MX6Q_PAD_KEY_ROW4), + IMX_PINCTRL_PIN(MX6Q_PAD_GPIO_0), + IMX_PINCTRL_PIN(MX6Q_PAD_GPIO_1), + IMX_PINCTRL_PIN(MX6Q_PAD_GPIO_9), + IMX_PINCTRL_PIN(MX6Q_PAD_GPIO_3), + IMX_PINCTRL_PIN(MX6Q_PAD_GPIO_6), + IMX_PINCTRL_PIN(MX6Q_PAD_GPIO_2), + IMX_PINCTRL_PIN(MX6Q_PAD_GPIO_4), + IMX_PINCTRL_PIN(MX6Q_PAD_GPIO_5), + IMX_PINCTRL_PIN(MX6Q_PAD_GPIO_7), + IMX_PINCTRL_PIN(MX6Q_PAD_GPIO_8), + IMX_PINCTRL_PIN(MX6Q_PAD_GPIO_16), + IMX_PINCTRL_PIN(MX6Q_PAD_GPIO_17), + IMX_PINCTRL_PIN(MX6Q_PAD_GPIO_18), + IMX_PINCTRL_PIN(MX6Q_PAD_GPIO_19), + IMX_PINCTRL_PIN(MX6Q_PAD_CSI0_PIXCLK), + IMX_PINCTRL_PIN(MX6Q_PAD_CSI0_MCLK), + IMX_PINCTRL_PIN(MX6Q_PAD_CSI0_DATA_EN), + IMX_PINCTRL_PIN(MX6Q_PAD_CSI0_VSYNC), + IMX_PINCTRL_PIN(MX6Q_PAD_CSI0_DAT4), + IMX_PINCTRL_PIN(MX6Q_PAD_CSI0_DAT5), + IMX_PINCTRL_PIN(MX6Q_PAD_CSI0_DAT6), + IMX_PINCTRL_PIN(MX6Q_PAD_CSI0_DAT7), + IMX_PINCTRL_PIN(MX6Q_PAD_CSI0_DAT8), + IMX_PINCTRL_PIN(MX6Q_PAD_CSI0_DAT9), + IMX_PINCTRL_PIN(MX6Q_PAD_CSI0_DAT10), + IMX_PINCTRL_PIN(MX6Q_PAD_CSI0_DAT11), + IMX_PINCTRL_PIN(MX6Q_PAD_CSI0_DAT12), + IMX_PINCTRL_PIN(MX6Q_PAD_CSI0_DAT13), + IMX_PINCTRL_PIN(MX6Q_PAD_CSI0_DAT14), + IMX_PINCTRL_PIN(MX6Q_PAD_CSI0_DAT15), + IMX_PINCTRL_PIN(MX6Q_PAD_CSI0_DAT16), + IMX_PINCTRL_PIN(MX6Q_PAD_CSI0_DAT17), + IMX_PINCTRL_PIN(MX6Q_PAD_CSI0_DAT18), + IMX_PINCTRL_PIN(MX6Q_PAD_CSI0_DAT19), + IMX_PINCTRL_PIN(MX6Q_PAD_JTAG_TMS), + IMX_PINCTRL_PIN(MX6Q_PAD_JTAG_MOD), + IMX_PINCTRL_PIN(MX6Q_PAD_JTAG_TRSTB), + IMX_PINCTRL_PIN(MX6Q_PAD_JTAG_TDI), + IMX_PINCTRL_PIN(MX6Q_PAD_JTAG_TCK), + IMX_PINCTRL_PIN(MX6Q_PAD_JTAG_TDO), + IMX_PINCTRL_PIN(MX6Q_PAD_LVDS1_TX3_P), + IMX_PINCTRL_PIN(MX6Q_PAD_LVDS1_TX2_P), + IMX_PINCTRL_PIN(MX6Q_PAD_LVDS1_CLK_P), + IMX_PINCTRL_PIN(MX6Q_PAD_LVDS1_TX1_P), + IMX_PINCTRL_PIN(MX6Q_PAD_LVDS1_TX0_P), + IMX_PINCTRL_PIN(MX6Q_PAD_LVDS0_TX3_P), + IMX_PINCTRL_PIN(MX6Q_PAD_LVDS0_CLK_P), + IMX_PINCTRL_PIN(MX6Q_PAD_LVDS0_TX2_P), + IMX_PINCTRL_PIN(MX6Q_PAD_LVDS0_TX1_P), + IMX_PINCTRL_PIN(MX6Q_PAD_LVDS0_TX0_P), + IMX_PINCTRL_PIN(MX6Q_PAD_TAMPER), + IMX_PINCTRL_PIN(MX6Q_PAD_PMIC_ON_REQ), + IMX_PINCTRL_PIN(MX6Q_PAD_PMIC_STBY_REQ), + IMX_PINCTRL_PIN(MX6Q_PAD_POR_B), + IMX_PINCTRL_PIN(MX6Q_PAD_BOOT_MODE1), + IMX_PINCTRL_PIN(MX6Q_PAD_RESET_IN_B), + IMX_PINCTRL_PIN(MX6Q_PAD_BOOT_MODE0), + IMX_PINCTRL_PIN(MX6Q_PAD_TEST_MODE), + IMX_PINCTRL_PIN(MX6Q_PAD_SD3_DAT7), + IMX_PINCTRL_PIN(MX6Q_PAD_SD3_DAT6), + IMX_PINCTRL_PIN(MX6Q_PAD_SD3_DAT5), + IMX_PINCTRL_PIN(MX6Q_PAD_SD3_DAT4), + IMX_PINCTRL_PIN(MX6Q_PAD_SD3_CMD), + IMX_PINCTRL_PIN(MX6Q_PAD_SD3_CLK), + IMX_PINCTRL_PIN(MX6Q_PAD_SD3_DAT0), + IMX_PINCTRL_PIN(MX6Q_PAD_SD3_DAT1), + IMX_PINCTRL_PIN(MX6Q_PAD_SD3_DAT2), + IMX_PINCTRL_PIN(MX6Q_PAD_SD3_DAT3), + IMX_PINCTRL_PIN(MX6Q_PAD_SD3_RST), + IMX_PINCTRL_PIN(MX6Q_PAD_NANDF_CLE), + IMX_PINCTRL_PIN(MX6Q_PAD_NANDF_ALE), + IMX_PINCTRL_PIN(MX6Q_PAD_NANDF_WP_B), + IMX_PINCTRL_PIN(MX6Q_PAD_NANDF_RB0), + IMX_PINCTRL_PIN(MX6Q_PAD_NANDF_CS0), + IMX_PINCTRL_PIN(MX6Q_PAD_NANDF_CS1), + IMX_PINCTRL_PIN(MX6Q_PAD_NANDF_CS2), + IMX_PINCTRL_PIN(MX6Q_PAD_NANDF_CS3), + IMX_PINCTRL_PIN(MX6Q_PAD_SD4_CMD), + IMX_PINCTRL_PIN(MX6Q_PAD_SD4_CLK), + IMX_PINCTRL_PIN(MX6Q_PAD_NANDF_D0), + IMX_PINCTRL_PIN(MX6Q_PAD_NANDF_D1), + IMX_PINCTRL_PIN(MX6Q_PAD_NANDF_D2), + IMX_PINCTRL_PIN(MX6Q_PAD_NANDF_D3), + IMX_PINCTRL_PIN(MX6Q_PAD_NANDF_D4), + IMX_PINCTRL_PIN(MX6Q_PAD_NANDF_D5), + IMX_PINCTRL_PIN(MX6Q_PAD_NANDF_D6), + IMX_PINCTRL_PIN(MX6Q_PAD_NANDF_D7), + IMX_PINCTRL_PIN(MX6Q_PAD_SD4_DAT0), + IMX_PINCTRL_PIN(MX6Q_PAD_SD4_DAT1), + IMX_PINCTRL_PIN(MX6Q_PAD_SD4_DAT2), + IMX_PINCTRL_PIN(MX6Q_PAD_SD4_DAT3), + IMX_PINCTRL_PIN(MX6Q_PAD_SD4_DAT4), + IMX_PINCTRL_PIN(MX6Q_PAD_SD4_DAT5), + IMX_PINCTRL_PIN(MX6Q_PAD_SD4_DAT6), + IMX_PINCTRL_PIN(MX6Q_PAD_SD4_DAT7), + IMX_PINCTRL_PIN(MX6Q_PAD_SD1_DAT1), + IMX_PINCTRL_PIN(MX6Q_PAD_SD1_DAT0), + IMX_PINCTRL_PIN(MX6Q_PAD_SD1_DAT3), + IMX_PINCTRL_PIN(MX6Q_PAD_SD1_CMD), + IMX_PINCTRL_PIN(MX6Q_PAD_SD1_DAT2), + IMX_PINCTRL_PIN(MX6Q_PAD_SD1_CLK), + IMX_PINCTRL_PIN(MX6Q_PAD_SD2_CLK), + IMX_PINCTRL_PIN(MX6Q_PAD_SD2_CMD), + IMX_PINCTRL_PIN(MX6Q_PAD_SD2_DAT3), +}; + +static struct imx_pinctrl_soc_info imx6q_pinctrl_info = { + .pins = imx6q_pinctrl_pads, + .npins = ARRAY_SIZE(imx6q_pinctrl_pads), + .pin_regs = imx6q_pin_regs, + .npin_regs = ARRAY_SIZE(imx6q_pin_regs), +}; + +static struct of_device_id imx6q_pinctrl_of_match[] __devinitdata = { + { .compatible = "fsl,imx6q-iomuxc", }, + { /* sentinel */ } +}; + +static int __devinit imx6q_pinctrl_probe(struct platform_device *pdev) +{ + return imx_pinctrl_probe(pdev, &imx6q_pinctrl_info); +} + +static struct platform_driver imx6q_pinctrl_driver = { + .driver = { + .name = "imx6q-pinctrl", + .owner = THIS_MODULE, + .of_match_table = of_match_ptr(imx6q_pinctrl_of_match), + }, + .probe = imx6q_pinctrl_probe, + .remove = __devexit_p(imx_pinctrl_remove), +}; + +static int __init imx6q_pinctrl_init(void) +{ + return platform_driver_register(&imx6q_pinctrl_driver); +} +arch_initcall(imx6q_pinctrl_init); + +static void __exit imx6q_pinctrl_exit(void) +{ + platform_driver_unregister(&imx6q_pinctrl_driver); +} +module_exit(imx6q_pinctrl_exit); +MODULE_AUTHOR("Dong Aisheng "); +MODULE_DESCRIPTION("Freescale IMX6Q pinctrl driver"); +MODULE_LICENSE("GPL v2"); -- cgit v1.2.3 From 17723111e64fbcc327846ff0b33532bcf1d40f56 Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Sat, 28 Apr 2012 13:00:50 +0800 Subject: pinctrl: add pinctrl-mxs support Add pinctrl support for Freescale MXS SoCs, i.MX23 and i.MX28. The driver supports device tree probe only. Signed-off-by: Shawn Guo Acked-by: Stephen Warren Signed-off-by: Linus Walleij --- .../bindings/pinctrl/fsl,mxs-pinctrl.txt | 918 +++++++++++++++++++++ drivers/pinctrl/Kconfig | 15 + drivers/pinctrl/Makefile | 3 + drivers/pinctrl/pinctrl-imx23.c | 305 +++++++ drivers/pinctrl/pinctrl-imx28.c | 421 ++++++++++ drivers/pinctrl/pinctrl-mxs.c | 508 ++++++++++++ drivers/pinctrl/pinctrl-mxs.h | 91 ++ 7 files changed, 2261 insertions(+) create mode 100644 Documentation/devicetree/bindings/pinctrl/fsl,mxs-pinctrl.txt create mode 100644 drivers/pinctrl/pinctrl-imx23.c create mode 100644 drivers/pinctrl/pinctrl-imx28.c create mode 100644 drivers/pinctrl/pinctrl-mxs.c create mode 100644 drivers/pinctrl/pinctrl-mxs.h diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,mxs-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,mxs-pinctrl.txt new file mode 100644 index 000000000000..f7e8e8f4d9a3 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/fsl,mxs-pinctrl.txt @@ -0,0 +1,918 @@ +* Freescale MXS Pin Controller + +The pins controlled by mxs pin controller are organized in banks, each bank +has 32 pins. Each pin has 4 multiplexing functions, and generally, the 4th +function is GPIO. The configuration on the pins includes drive strength, +voltage and pull-up. + +Required properties: +- compatible: "fsl,imx23-pinctrl" or "fsl,imx28-pinctrl" +- reg: Should contain the register physical address and length for the + pin controller. + +Please refer to pinctrl-bindings.txt in this directory for details of the +common pinctrl bindings used by client devices. + +The node of mxs pin controller acts as a container for an arbitrary number of +subnodes. Each of these subnodes represents some desired configuration for +a group of pins, and only affects those parameters that are explicitly listed. +In other words, a subnode that describes a drive strength parameter implies no +information about pull-up. For this reason, even seemingly boolean values are +actually tristates in this binding: unspecified, off, or on. Unspecified is +represented as an absent property, and off/on are represented as integer +values 0 and 1. + +Those subnodes under mxs pin controller node will fall into two categories. +One is to set up a group of pins for a function, both mux selection and pin +configurations, and it's called group node in the binding document. The other +one is to adjust the pin configuration for some particular pins that need a +different configuration than what is defined in group node. The binding +document calls this type of node config node. + +On mxs, there is no hardware pin group. The pin group in this binding only +means a group of pins put together for particular peripheral to work in +particular function, like SSP0 functioning as mmc0-8bit. That said, the +group node should include all the pins needed for one function rather than +having these pins defined in several group nodes. It also means each of +"pinctrl-*" phandle in client device node should only have one group node +pointed in there, while the phandle can have multiple config node referenced +there to adjust configurations for some pins in the group. + +Required subnode-properties: +- fsl,pinmux-ids: An integer array. Each integer in the array specify a pin + with given mux function, with bank, pin and mux packed as below. + + [15..12] : bank number + [11..4] : pin number + [3..0] : mux selection + + This integer with mux selection packed is used as an entity by both group + and config nodes to identify a pin. The mux selection in the integer takes + effects only on group node, and will get ignored by driver with config node, + since config node is only meant to set up pin configurations. + + Valid values for these integers are listed below. + +- reg: Should be the index of the group nodes for same function. This property + is required only for group nodes, and should not be present in any config + nodes. + +Optional subnode-properties: +- fsl,drive-strength: Integer. + 0: 4 mA + 1: 8 mA + 2: 12 mA + 3: 16 mA +- fsl,voltage: Integer. + 0: 1.8 V + 1: 3.3 V +- fsl,pull-up: Integer. + 0: Disable the internal pull-up + 1: Enable the internal pull-up + +Examples: + +pinctrl@80018000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx28-pinctrl"; + reg = <0x80018000 2000>; + + mmc0_8bit_pins_a: mmc0-8bit@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x2000 0x2010 0x2020 0x2030 + 0x2040 0x2050 0x2060 0x2070 + 0x2080 0x2090 0x20a0>; + fsl,drive-strength = <1>; + fsl,voltage = <1>; + fsl,pull-up = <1>; + }; + + mmc_cd_cfg: mmc-cd-cfg { + fsl,pinmux-ids = <0x2090>; + fsl,pull-up = <0>; + }; + + mmc_sck_cfg: mmc-sck-cfg { + fsl,pinmux-ids = <0x20a0>; + fsl,drive-strength = <2>; + fsl,pull-up = <0>; + }; +}; + +In this example, group node mmc0-8bit defines a group of pins for mxs SSP0 +to function as a 8-bit mmc device, with 8mA, 3.3V and pull-up configurations +applied on all these pins. And config nodes mmc-cd-cfg and mmc-sck-cfg are +adjusting the configuration for pins card-detection and clock from what group +node mmc0-8bit defines. Only the configuration properties to be adjusted need +to be listed in the config nodes. + +Valid values for i.MX28 pinmux-id: + +pinmux id +------ -- +MX28_PAD_GPMI_D00__GPMI_D0 0x0000 +MX28_PAD_GPMI_D01__GPMI_D1 0x0010 +MX28_PAD_GPMI_D02__GPMI_D2 0x0020 +MX28_PAD_GPMI_D03__GPMI_D3 0x0030 +MX28_PAD_GPMI_D04__GPMI_D4 0x0040 +MX28_PAD_GPMI_D05__GPMI_D5 0x0050 +MX28_PAD_GPMI_D06__GPMI_D6 0x0060 +MX28_PAD_GPMI_D07__GPMI_D7 0x0070 +MX28_PAD_GPMI_CE0N__GPMI_CE0N 0x0100 +MX28_PAD_GPMI_CE1N__GPMI_CE1N 0x0110 +MX28_PAD_GPMI_CE2N__GPMI_CE2N 0x0120 +MX28_PAD_GPMI_CE3N__GPMI_CE3N 0x0130 +MX28_PAD_GPMI_RDY0__GPMI_READY0 0x0140 +MX28_PAD_GPMI_RDY1__GPMI_READY1 0x0150 +MX28_PAD_GPMI_RDY2__GPMI_READY2 0x0160 +MX28_PAD_GPMI_RDY3__GPMI_READY3 0x0170 +MX28_PAD_GPMI_RDN__GPMI_RDN 0x0180 +MX28_PAD_GPMI_WRN__GPMI_WRN 0x0190 +MX28_PAD_GPMI_ALE__GPMI_ALE 0x01a0 +MX28_PAD_GPMI_CLE__GPMI_CLE 0x01b0 +MX28_PAD_GPMI_RESETN__GPMI_RESETN 0x01c0 +MX28_PAD_LCD_D00__LCD_D0 0x1000 +MX28_PAD_LCD_D01__LCD_D1 0x1010 +MX28_PAD_LCD_D02__LCD_D2 0x1020 +MX28_PAD_LCD_D03__LCD_D3 0x1030 +MX28_PAD_LCD_D04__LCD_D4 0x1040 +MX28_PAD_LCD_D05__LCD_D5 0x1050 +MX28_PAD_LCD_D06__LCD_D6 0x1060 +MX28_PAD_LCD_D07__LCD_D7 0x1070 +MX28_PAD_LCD_D08__LCD_D8 0x1080 +MX28_PAD_LCD_D09__LCD_D9 0x1090 +MX28_PAD_LCD_D10__LCD_D10 0x10a0 +MX28_PAD_LCD_D11__LCD_D11 0x10b0 +MX28_PAD_LCD_D12__LCD_D12 0x10c0 +MX28_PAD_LCD_D13__LCD_D13 0x10d0 +MX28_PAD_LCD_D14__LCD_D14 0x10e0 +MX28_PAD_LCD_D15__LCD_D15 0x10f0 +MX28_PAD_LCD_D16__LCD_D16 0x1100 +MX28_PAD_LCD_D17__LCD_D17 0x1110 +MX28_PAD_LCD_D18__LCD_D18 0x1120 +MX28_PAD_LCD_D19__LCD_D19 0x1130 +MX28_PAD_LCD_D20__LCD_D20 0x1140 +MX28_PAD_LCD_D21__LCD_D21 0x1150 +MX28_PAD_LCD_D22__LCD_D22 0x1160 +MX28_PAD_LCD_D23__LCD_D23 0x1170 +MX28_PAD_LCD_RD_E__LCD_RD_E 0x1180 +MX28_PAD_LCD_WR_RWN__LCD_WR_RWN 0x1190 +MX28_PAD_LCD_RS__LCD_RS 0x11a0 +MX28_PAD_LCD_CS__LCD_CS 0x11b0 +MX28_PAD_LCD_VSYNC__LCD_VSYNC 0x11c0 +MX28_PAD_LCD_HSYNC__LCD_HSYNC 0x11d0 +MX28_PAD_LCD_DOTCLK__LCD_DOTCLK 0x11e0 +MX28_PAD_LCD_ENABLE__LCD_ENABLE 0x11f0 +MX28_PAD_SSP0_DATA0__SSP0_D0 0x2000 +MX28_PAD_SSP0_DATA1__SSP0_D1 0x2010 +MX28_PAD_SSP0_DATA2__SSP0_D2 0x2020 +MX28_PAD_SSP0_DATA3__SSP0_D3 0x2030 +MX28_PAD_SSP0_DATA4__SSP0_D4 0x2040 +MX28_PAD_SSP0_DATA5__SSP0_D5 0x2050 +MX28_PAD_SSP0_DATA6__SSP0_D6 0x2060 +MX28_PAD_SSP0_DATA7__SSP0_D7 0x2070 +MX28_PAD_SSP0_CMD__SSP0_CMD 0x2080 +MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT 0x2090 +MX28_PAD_SSP0_SCK__SSP0_SCK 0x20a0 +MX28_PAD_SSP1_SCK__SSP1_SCK 0x20c0 +MX28_PAD_SSP1_CMD__SSP1_CMD 0x20d0 +MX28_PAD_SSP1_DATA0__SSP1_D0 0x20e0 +MX28_PAD_SSP1_DATA3__SSP1_D3 0x20f0 +MX28_PAD_SSP2_SCK__SSP2_SCK 0x2100 +MX28_PAD_SSP2_MOSI__SSP2_CMD 0x2110 +MX28_PAD_SSP2_MISO__SSP2_D0 0x2120 +MX28_PAD_SSP2_SS0__SSP2_D3 0x2130 +MX28_PAD_SSP2_SS1__SSP2_D4 0x2140 +MX28_PAD_SSP2_SS2__SSP2_D5 0x2150 +MX28_PAD_SSP3_SCK__SSP3_SCK 0x2180 +MX28_PAD_SSP3_MOSI__SSP3_CMD 0x2190 +MX28_PAD_SSP3_MISO__SSP3_D0 0x21a0 +MX28_PAD_SSP3_SS0__SSP3_D3 0x21b0 +MX28_PAD_AUART0_RX__AUART0_RX 0x3000 +MX28_PAD_AUART0_TX__AUART0_TX 0x3010 +MX28_PAD_AUART0_CTS__AUART0_CTS 0x3020 +MX28_PAD_AUART0_RTS__AUART0_RTS 0x3030 +MX28_PAD_AUART1_RX__AUART1_RX 0x3040 +MX28_PAD_AUART1_TX__AUART1_TX 0x3050 +MX28_PAD_AUART1_CTS__AUART1_CTS 0x3060 +MX28_PAD_AUART1_RTS__AUART1_RTS 0x3070 +MX28_PAD_AUART2_RX__AUART2_RX 0x3080 +MX28_PAD_AUART2_TX__AUART2_TX 0x3090 +MX28_PAD_AUART2_CTS__AUART2_CTS 0x30a0 +MX28_PAD_AUART2_RTS__AUART2_RTS 0x30b0 +MX28_PAD_AUART3_RX__AUART3_RX 0x30c0 +MX28_PAD_AUART3_TX__AUART3_TX 0x30d0 +MX28_PAD_AUART3_CTS__AUART3_CTS 0x30e0 +MX28_PAD_AUART3_RTS__AUART3_RTS 0x30f0 +MX28_PAD_PWM0__PWM_0 0x3100 +MX28_PAD_PWM1__PWM_1 0x3110 +MX28_PAD_PWM2__PWM_2 0x3120 +MX28_PAD_SAIF0_MCLK__SAIF0_MCLK 0x3140 +MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK 0x3150 +MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK 0x3160 +MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0 0x3170 +MX28_PAD_I2C0_SCL__I2C0_SCL 0x3180 +MX28_PAD_I2C0_SDA__I2C0_SDA 0x3190 +MX28_PAD_SAIF1_SDATA0__SAIF1_SDATA0 0x31a0 +MX28_PAD_SPDIF__SPDIF_TX 0x31b0 +MX28_PAD_PWM3__PWM_3 0x31c0 +MX28_PAD_PWM4__PWM_4 0x31d0 +MX28_PAD_LCD_RESET__LCD_RESET 0x31e0 +MX28_PAD_ENET0_MDC__ENET0_MDC 0x4000 +MX28_PAD_ENET0_MDIO__ENET0_MDIO 0x4010 +MX28_PAD_ENET0_RX_EN__ENET0_RX_EN 0x4020 +MX28_PAD_ENET0_RXD0__ENET0_RXD0 0x4030 +MX28_PAD_ENET0_RXD1__ENET0_RXD1 0x4040 +MX28_PAD_ENET0_TX_CLK__ENET0_TX_CLK 0x4050 +MX28_PAD_ENET0_TX_EN__ENET0_TX_EN 0x4060 +MX28_PAD_ENET0_TXD0__ENET0_TXD0 0x4070 +MX28_PAD_ENET0_TXD1__ENET0_TXD1 0x4080 +MX28_PAD_ENET0_RXD2__ENET0_RXD2 0x4090 +MX28_PAD_ENET0_RXD3__ENET0_RXD3 0x40a0 +MX28_PAD_ENET0_TXD2__ENET0_TXD2 0x40b0 +MX28_PAD_ENET0_TXD3__ENET0_TXD3 0x40c0 +MX28_PAD_ENET0_RX_CLK__ENET0_RX_CLK 0x40d0 +MX28_PAD_ENET0_COL__ENET0_COL 0x40e0 +MX28_PAD_ENET0_CRS__ENET0_CRS 0x40f0 +MX28_PAD_ENET_CLK__CLKCTRL_ENET 0x4100 +MX28_PAD_JTAG_RTCK__JTAG_RTCK 0x4140 +MX28_PAD_EMI_D00__EMI_DATA0 0x5000 +MX28_PAD_EMI_D01__EMI_DATA1 0x5010 +MX28_PAD_EMI_D02__EMI_DATA2 0x5020 +MX28_PAD_EMI_D03__EMI_DATA3 0x5030 +MX28_PAD_EMI_D04__EMI_DATA4 0x5040 +MX28_PAD_EMI_D05__EMI_DATA5 0x5050 +MX28_PAD_EMI_D06__EMI_DATA6 0x5060 +MX28_PAD_EMI_D07__EMI_DATA7 0x5070 +MX28_PAD_EMI_D08__EMI_DATA8 0x5080 +MX28_PAD_EMI_D09__EMI_DATA9 0x5090 +MX28_PAD_EMI_D10__EMI_DATA10 0x50a0 +MX28_PAD_EMI_D11__EMI_DATA11 0x50b0 +MX28_PAD_EMI_D12__EMI_DATA12 0x50c0 +MX28_PAD_EMI_D13__EMI_DATA13 0x50d0 +MX28_PAD_EMI_D14__EMI_DATA14 0x50e0 +MX28_PAD_EMI_D15__EMI_DATA15 0x50f0 +MX28_PAD_EMI_ODT0__EMI_ODT0 0x5100 +MX28_PAD_EMI_DQM0__EMI_DQM0 0x5110 +MX28_PAD_EMI_ODT1__EMI_ODT1 0x5120 +MX28_PAD_EMI_DQM1__EMI_DQM1 0x5130 +MX28_PAD_EMI_DDR_OPEN_FB__EMI_DDR_OPEN_FEEDBACK 0x5140 +MX28_PAD_EMI_CLK__EMI_CLK 0x5150 +MX28_PAD_EMI_DQS0__EMI_DQS0 0x5160 +MX28_PAD_EMI_DQS1__EMI_DQS1 0x5170 +MX28_PAD_EMI_DDR_OPEN__EMI_DDR_OPEN 0x51a0 +MX28_PAD_EMI_A00__EMI_ADDR0 0x6000 +MX28_PAD_EMI_A01__EMI_ADDR1 0x6010 +MX28_PAD_EMI_A02__EMI_ADDR2 0x6020 +MX28_PAD_EMI_A03__EMI_ADDR3 0x6030 +MX28_PAD_EMI_A04__EMI_ADDR4 0x6040 +MX28_PAD_EMI_A05__EMI_ADDR5 0x6050 +MX28_PAD_EMI_A06__EMI_ADDR6 0x6060 +MX28_PAD_EMI_A07__EMI_ADDR7 0x6070 +MX28_PAD_EMI_A08__EMI_ADDR8 0x6080 +MX28_PAD_EMI_A09__EMI_ADDR9 0x6090 +MX28_PAD_EMI_A10__EMI_ADDR10 0x60a0 +MX28_PAD_EMI_A11__EMI_ADDR11 0x60b0 +MX28_PAD_EMI_A12__EMI_ADDR12 0x60c0 +MX28_PAD_EMI_A13__EMI_ADDR13 0x60d0 +MX28_PAD_EMI_A14__EMI_ADDR14 0x60e0 +MX28_PAD_EMI_BA0__EMI_BA0 0x6100 +MX28_PAD_EMI_BA1__EMI_BA1 0x6110 +MX28_PAD_EMI_BA2__EMI_BA2 0x6120 +MX28_PAD_EMI_CASN__EMI_CASN 0x6130 +MX28_PAD_EMI_RASN__EMI_RASN 0x6140 +MX28_PAD_EMI_WEN__EMI_WEN 0x6150 +MX28_PAD_EMI_CE0N__EMI_CE0N 0x6160 +MX28_PAD_EMI_CE1N__EMI_CE1N 0x6170 +MX28_PAD_EMI_CKE__EMI_CKE 0x6180 +MX28_PAD_GPMI_D00__SSP1_D0 0x0001 +MX28_PAD_GPMI_D01__SSP1_D1 0x0011 +MX28_PAD_GPMI_D02__SSP1_D2 0x0021 +MX28_PAD_GPMI_D03__SSP1_D3 0x0031 +MX28_PAD_GPMI_D04__SSP1_D4 0x0041 +MX28_PAD_GPMI_D05__SSP1_D5 0x0051 +MX28_PAD_GPMI_D06__SSP1_D6 0x0061 +MX28_PAD_GPMI_D07__SSP1_D7 0x0071 +MX28_PAD_GPMI_CE0N__SSP3_D0 0x0101 +MX28_PAD_GPMI_CE1N__SSP3_D3 0x0111 +MX28_PAD_GPMI_CE2N__CAN1_TX 0x0121 +MX28_PAD_GPMI_CE3N__CAN1_RX 0x0131 +MX28_PAD_GPMI_RDY0__SSP1_CARD_DETECT 0x0141 +MX28_PAD_GPMI_RDY1__SSP1_CMD 0x0151 +MX28_PAD_GPMI_RDY2__CAN0_TX 0x0161 +MX28_PAD_GPMI_RDY3__CAN0_RX 0x0171 +MX28_PAD_GPMI_RDN__SSP3_SCK 0x0181 +MX28_PAD_GPMI_WRN__SSP1_SCK 0x0191 +MX28_PAD_GPMI_ALE__SSP3_D1 0x01a1 +MX28_PAD_GPMI_CLE__SSP3_D2 0x01b1 +MX28_PAD_GPMI_RESETN__SSP3_CMD 0x01c1 +MX28_PAD_LCD_D03__ETM_DA8 0x1031 +MX28_PAD_LCD_D04__ETM_DA9 0x1041 +MX28_PAD_LCD_D08__ETM_DA3 0x1081 +MX28_PAD_LCD_D09__ETM_DA4 0x1091 +MX28_PAD_LCD_D20__ENET1_1588_EVENT2_OUT 0x1141 +MX28_PAD_LCD_D21__ENET1_1588_EVENT2_IN 0x1151 +MX28_PAD_LCD_D22__ENET1_1588_EVENT3_OUT 0x1161 +MX28_PAD_LCD_D23__ENET1_1588_EVENT3_IN 0x1171 +MX28_PAD_LCD_RD_E__LCD_VSYNC 0x1181 +MX28_PAD_LCD_WR_RWN__LCD_HSYNC 0x1191 +MX28_PAD_LCD_RS__LCD_DOTCLK 0x11a1 +MX28_PAD_LCD_CS__LCD_ENABLE 0x11b1 +MX28_PAD_LCD_VSYNC__SAIF1_SDATA0 0x11c1 +MX28_PAD_LCD_HSYNC__SAIF1_SDATA1 0x11d1 +MX28_PAD_LCD_DOTCLK__SAIF1_MCLK 0x11e1 +MX28_PAD_SSP0_DATA4__SSP2_D0 0x2041 +MX28_PAD_SSP0_DATA5__SSP2_D3 0x2051 +MX28_PAD_SSP0_DATA6__SSP2_CMD 0x2061 +MX28_PAD_SSP0_DATA7__SSP2_SCK 0x2071 +MX28_PAD_SSP1_SCK__SSP2_D1 0x20c1 +MX28_PAD_SSP1_CMD__SSP2_D2 0x20d1 +MX28_PAD_SSP1_DATA0__SSP2_D6 0x20e1 +MX28_PAD_SSP1_DATA3__SSP2_D7 0x20f1 +MX28_PAD_SSP2_SCK__AUART2_RX 0x2101 +MX28_PAD_SSP2_MOSI__AUART2_TX 0x2111 +MX28_PAD_SSP2_MISO__AUART3_RX 0x2121 +MX28_PAD_SSP2_SS0__AUART3_TX 0x2131 +MX28_PAD_SSP2_SS1__SSP2_D1 0x2141 +MX28_PAD_SSP2_SS2__SSP2_D2 0x2151 +MX28_PAD_SSP3_SCK__AUART4_TX 0x2181 +MX28_PAD_SSP3_MOSI__AUART4_RX 0x2191 +MX28_PAD_SSP3_MISO__AUART4_RTS 0x21a1 +MX28_PAD_SSP3_SS0__AUART4_CTS 0x21b1 +MX28_PAD_AUART0_RX__I2C0_SCL 0x3001 +MX28_PAD_AUART0_TX__I2C0_SDA 0x3011 +MX28_PAD_AUART0_CTS__AUART4_RX 0x3021 +MX28_PAD_AUART0_RTS__AUART4_TX 0x3031 +MX28_PAD_AUART1_RX__SSP2_CARD_DETECT 0x3041 +MX28_PAD_AUART1_TX__SSP3_CARD_DETECT 0x3051 +MX28_PAD_AUART1_CTS__USB0_OVERCURRENT 0x3061 +MX28_PAD_AUART1_RTS__USB0_ID 0x3071 +MX28_PAD_AUART2_RX__SSP3_D1 0x3081 +MX28_PAD_AUART2_TX__SSP3_D2 0x3091 +MX28_PAD_AUART2_CTS__I2C1_SCL 0x30a1 +MX28_PAD_AUART2_RTS__I2C1_SDA 0x30b1 +MX28_PAD_AUART3_RX__CAN0_TX 0x30c1 +MX28_PAD_AUART3_TX__CAN0_RX 0x30d1 +MX28_PAD_AUART3_CTS__CAN1_TX 0x30e1 +MX28_PAD_AUART3_RTS__CAN1_RX 0x30f1 +MX28_PAD_PWM0__I2C1_SCL 0x3101 +MX28_PAD_PWM1__I2C1_SDA 0x3111 +MX28_PAD_PWM2__USB0_ID 0x3121 +MX28_PAD_SAIF0_MCLK__PWM_3 0x3141 +MX28_PAD_SAIF0_LRCLK__PWM_4 0x3151 +MX28_PAD_SAIF0_BITCLK__PWM_5 0x3161 +MX28_PAD_SAIF0_SDATA0__PWM_6 0x3171 +MX28_PAD_I2C0_SCL__TIMROT_ROTARYA 0x3181 +MX28_PAD_I2C0_SDA__TIMROT_ROTARYB 0x3191 +MX28_PAD_SAIF1_SDATA0__PWM_7 0x31a1 +MX28_PAD_LCD_RESET__LCD_VSYNC 0x31e1 +MX28_PAD_ENET0_MDC__GPMI_CE4N 0x4001 +MX28_PAD_ENET0_MDIO__GPMI_CE5N 0x4011 +MX28_PAD_ENET0_RX_EN__GPMI_CE6N 0x4021 +MX28_PAD_ENET0_RXD0__GPMI_CE7N 0x4031 +MX28_PAD_ENET0_RXD1__GPMI_READY4 0x4041 +MX28_PAD_ENET0_TX_CLK__HSADC_TRIGGER 0x4051 +MX28_PAD_ENET0_TX_EN__GPMI_READY5 0x4061 +MX28_PAD_ENET0_TXD0__GPMI_READY6 0x4071 +MX28_PAD_ENET0_TXD1__GPMI_READY7 0x4081 +MX28_PAD_ENET0_RXD2__ENET1_RXD0 0x4091 +MX28_PAD_ENET0_RXD3__ENET1_RXD1 0x40a1 +MX28_PAD_ENET0_TXD2__ENET1_TXD0 0x40b1 +MX28_PAD_ENET0_TXD3__ENET1_TXD1 0x40c1 +MX28_PAD_ENET0_RX_CLK__ENET0_RX_ER 0x40d1 +MX28_PAD_ENET0_COL__ENET1_TX_EN 0x40e1 +MX28_PAD_ENET0_CRS__ENET1_RX_EN 0x40f1 +MX28_PAD_GPMI_CE2N__ENET0_RX_ER 0x0122 +MX28_PAD_GPMI_CE3N__SAIF1_MCLK 0x0132 +MX28_PAD_GPMI_RDY0__USB0_ID 0x0142 +MX28_PAD_GPMI_RDY2__ENET0_TX_ER 0x0162 +MX28_PAD_GPMI_RDY3__HSADC_TRIGGER 0x0172 +MX28_PAD_GPMI_ALE__SSP3_D4 0x01a2 +MX28_PAD_GPMI_CLE__SSP3_D5 0x01b2 +MX28_PAD_LCD_D00__ETM_DA0 0x1002 +MX28_PAD_LCD_D01__ETM_DA1 0x1012 +MX28_PAD_LCD_D02__ETM_DA2 0x1022 +MX28_PAD_LCD_D03__ETM_DA3 0x1032 +MX28_PAD_LCD_D04__ETM_DA4 0x1042 +MX28_PAD_LCD_D05__ETM_DA5 0x1052 +MX28_PAD_LCD_D06__ETM_DA6 0x1062 +MX28_PAD_LCD_D07__ETM_DA7 0x1072 +MX28_PAD_LCD_D08__ETM_DA8 0x1082 +MX28_PAD_LCD_D09__ETM_DA9 0x1092 +MX28_PAD_LCD_D10__ETM_DA10 0x10a2 +MX28_PAD_LCD_D11__ETM_DA11 0x10b2 +MX28_PAD_LCD_D12__ETM_DA12 0x10c2 +MX28_PAD_LCD_D13__ETM_DA13 0x10d2 +MX28_PAD_LCD_D14__ETM_DA14 0x10e2 +MX28_PAD_LCD_D15__ETM_DA15 0x10f2 +MX28_PAD_LCD_D16__ETM_DA7 0x1102 +MX28_PAD_LCD_D17__ETM_DA6 0x1112 +MX28_PAD_LCD_D18__ETM_DA5 0x1122 +MX28_PAD_LCD_D19__ETM_DA4 0x1132 +MX28_PAD_LCD_D20__ETM_DA3 0x1142 +MX28_PAD_LCD_D21__ETM_DA2 0x1152 +MX28_PAD_LCD_D22__ETM_DA1 0x1162 +MX28_PAD_LCD_D23__ETM_DA0 0x1172 +MX28_PAD_LCD_RD_E__ETM_TCTL 0x1182 +MX28_PAD_LCD_WR_RWN__ETM_TCLK 0x1192 +MX28_PAD_LCD_HSYNC__ETM_TCTL 0x11d2 +MX28_PAD_LCD_DOTCLK__ETM_TCLK 0x11e2 +MX28_PAD_SSP1_SCK__ENET0_1588_EVENT2_OUT 0x20c2 +MX28_PAD_SSP1_CMD__ENET0_1588_EVENT2_IN 0x20d2 +MX28_PAD_SSP1_DATA0__ENET0_1588_EVENT3_OUT 0x20e2 +MX28_PAD_SSP1_DATA3__ENET0_1588_EVENT3_IN 0x20f2 +MX28_PAD_SSP2_SCK__SAIF0_SDATA1 0x2102 +MX28_PAD_SSP2_MOSI__SAIF0_SDATA2 0x2112 +MX28_PAD_SSP2_MISO__SAIF1_SDATA1 0x2122 +MX28_PAD_SSP2_SS0__SAIF1_SDATA2 0x2132 +MX28_PAD_SSP2_SS1__USB1_OVERCURRENT 0x2142 +MX28_PAD_SSP2_SS2__USB0_OVERCURRENT 0x2152 +MX28_PAD_SSP3_SCK__ENET1_1588_EVENT0_OUT 0x2182 +MX28_PAD_SSP3_MOSI__ENET1_1588_EVENT0_IN 0x2192 +MX28_PAD_SSP3_MISO__ENET1_1588_EVENT1_OUT 0x21a2 +MX28_PAD_SSP3_SS0__ENET1_1588_EVENT1_IN 0x21b2 +MX28_PAD_AUART0_RX__DUART_CTS 0x3002 +MX28_PAD_AUART0_TX__DUART_RTS 0x3012 +MX28_PAD_AUART0_CTS__DUART_RX 0x3022 +MX28_PAD_AUART0_RTS__DUART_TX 0x3032 +MX28_PAD_AUART1_RX__PWM_0 0x3042 +MX28_PAD_AUART1_TX__PWM_1 0x3052 +MX28_PAD_AUART1_CTS__TIMROT_ROTARYA 0x3062 +MX28_PAD_AUART1_RTS__TIMROT_ROTARYB 0x3072 +MX28_PAD_AUART2_RX__SSP3_D4 0x3082 +MX28_PAD_AUART2_TX__SSP3_D5 0x3092 +MX28_PAD_AUART2_CTS__SAIF1_BITCLK 0x30a2 +MX28_PAD_AUART2_RTS__SAIF1_LRCLK 0x30b2 +MX28_PAD_AUART3_RX__ENET0_1588_EVENT0_OUT 0x30c2 +MX28_PAD_AUART3_TX__ENET0_1588_EVENT0_IN 0x30d2 +MX28_PAD_AUART3_CTS__ENET0_1588_EVENT1_OUT 0x30e2 +MX28_PAD_AUART3_RTS__ENET0_1588_EVENT1_IN 0x30f2 +MX28_PAD_PWM0__DUART_RX 0x3102 +MX28_PAD_PWM1__DUART_TX 0x3112 +MX28_PAD_PWM2__USB1_OVERCURRENT 0x3122 +MX28_PAD_SAIF0_MCLK__AUART4_CTS 0x3142 +MX28_PAD_SAIF0_LRCLK__AUART4_RTS 0x3152 +MX28_PAD_SAIF0_BITCLK__AUART4_RX 0x3162 +MX28_PAD_SAIF0_SDATA0__AUART4_TX 0x3172 +MX28_PAD_I2C0_SCL__DUART_RX 0x3182 +MX28_PAD_I2C0_SDA__DUART_TX 0x3192 +MX28_PAD_SAIF1_SDATA0__SAIF0_SDATA1 0x31a2 +MX28_PAD_SPDIF__ENET1_RX_ER 0x31b2 +MX28_PAD_ENET0_MDC__SAIF0_SDATA1 0x4002 +MX28_PAD_ENET0_MDIO__SAIF0_SDATA2 0x4012 +MX28_PAD_ENET0_RX_EN__SAIF1_SDATA1 0x4022 +MX28_PAD_ENET0_RXD0__SAIF1_SDATA2 0x4032 +MX28_PAD_ENET0_TX_CLK__ENET0_1588_EVENT2_OUT 0x4052 +MX28_PAD_ENET0_RXD2__ENET0_1588_EVENT0_OUT 0x4092 +MX28_PAD_ENET0_RXD3__ENET0_1588_EVENT0_IN 0x40a2 +MX28_PAD_ENET0_TXD2__ENET0_1588_EVENT1_OUT 0x40b2 +MX28_PAD_ENET0_TXD3__ENET0_1588_EVENT1_IN 0x40c2 +MX28_PAD_ENET0_RX_CLK__ENET0_1588_EVENT2_IN 0x40d2 +MX28_PAD_ENET0_COL__ENET0_1588_EVENT3_OUT 0x40e2 +MX28_PAD_ENET0_CRS__ENET0_1588_EVENT3_IN 0x40f2 +MX28_PAD_GPMI_D00__GPIO_0_0 0x0003 +MX28_PAD_GPMI_D01__GPIO_0_1 0x0013 +MX28_PAD_GPMI_D02__GPIO_0_2 0x0023 +MX28_PAD_GPMI_D03__GPIO_0_3 0x0033 +MX28_PAD_GPMI_D04__GPIO_0_4 0x0043 +MX28_PAD_GPMI_D05__GPIO_0_5 0x0053 +MX28_PAD_GPMI_D06__GPIO_0_6 0x0063 +MX28_PAD_GPMI_D07__GPIO_0_7 0x0073 +MX28_PAD_GPMI_CE0N__GPIO_0_16 0x0103 +MX28_PAD_GPMI_CE1N__GPIO_0_17 0x0113 +MX28_PAD_GPMI_CE2N__GPIO_0_18 0x0123 +MX28_PAD_GPMI_CE3N__GPIO_0_19 0x0133 +MX28_PAD_GPMI_RDY0__GPIO_0_20 0x0143 +MX28_PAD_GPMI_RDY1__GPIO_0_21 0x0153 +MX28_PAD_GPMI_RDY2__GPIO_0_22 0x0163 +MX28_PAD_GPMI_RDY3__GPIO_0_23 0x0173 +MX28_PAD_GPMI_RDN__GPIO_0_24 0x0183 +MX28_PAD_GPMI_WRN__GPIO_0_25 0x0193 +MX28_PAD_GPMI_ALE__GPIO_0_26 0x01a3 +MX28_PAD_GPMI_CLE__GPIO_0_27 0x01b3 +MX28_PAD_GPMI_RESETN__GPIO_0_28 0x01c3 +MX28_PAD_LCD_D00__GPIO_1_0 0x1003 +MX28_PAD_LCD_D01__GPIO_1_1 0x1013 +MX28_PAD_LCD_D02__GPIO_1_2 0x1023 +MX28_PAD_LCD_D03__GPIO_1_3 0x1033 +MX28_PAD_LCD_D04__GPIO_1_4 0x1043 +MX28_PAD_LCD_D05__GPIO_1_5 0x1053 +MX28_PAD_LCD_D06__GPIO_1_6 0x1063 +MX28_PAD_LCD_D07__GPIO_1_7 0x1073 +MX28_PAD_LCD_D08__GPIO_1_8 0x1083 +MX28_PAD_LCD_D09__GPIO_1_9 0x1093 +MX28_PAD_LCD_D10__GPIO_1_10 0x10a3 +MX28_PAD_LCD_D11__GPIO_1_11 0x10b3 +MX28_PAD_LCD_D12__GPIO_1_12 0x10c3 +MX28_PAD_LCD_D13__GPIO_1_13 0x10d3 +MX28_PAD_LCD_D14__GPIO_1_14 0x10e3 +MX28_PAD_LCD_D15__GPIO_1_15 0x10f3 +MX28_PAD_LCD_D16__GPIO_1_16 0x1103 +MX28_PAD_LCD_D17__GPIO_1_17 0x1113 +MX28_PAD_LCD_D18__GPIO_1_18 0x1123 +MX28_PAD_LCD_D19__GPIO_1_19 0x1133 +MX28_PAD_LCD_D20__GPIO_1_20 0x1143 +MX28_PAD_LCD_D21__GPIO_1_21 0x1153 +MX28_PAD_LCD_D22__GPIO_1_22 0x1163 +MX28_PAD_LCD_D23__GPIO_1_23 0x1173 +MX28_PAD_LCD_RD_E__GPIO_1_24 0x1183 +MX28_PAD_LCD_WR_RWN__GPIO_1_25 0x1193 +MX28_PAD_LCD_RS__GPIO_1_26 0x11a3 +MX28_PAD_LCD_CS__GPIO_1_27 0x11b3 +MX28_PAD_LCD_VSYNC__GPIO_1_28 0x11c3 +MX28_PAD_LCD_HSYNC__GPIO_1_29 0x11d3 +MX28_PAD_LCD_DOTCLK__GPIO_1_30 0x11e3 +MX28_PAD_LCD_ENABLE__GPIO_1_31 0x11f3 +MX28_PAD_SSP0_DATA0__GPIO_2_0 0x2003 +MX28_PAD_SSP0_DATA1__GPIO_2_1 0x2013 +MX28_PAD_SSP0_DATA2__GPIO_2_2 0x2023 +MX28_PAD_SSP0_DATA3__GPIO_2_3 0x2033 +MX28_PAD_SSP0_DATA4__GPIO_2_4 0x2043 +MX28_PAD_SSP0_DATA5__GPIO_2_5 0x2053 +MX28_PAD_SSP0_DATA6__GPIO_2_6 0x2063 +MX28_PAD_SSP0_DATA7__GPIO_2_7 0x2073 +MX28_PAD_SSP0_CMD__GPIO_2_8 0x2083 +MX28_PAD_SSP0_DETECT__GPIO_2_9 0x2093 +MX28_PAD_SSP0_SCK__GPIO_2_10 0x20a3 +MX28_PAD_SSP1_SCK__GPIO_2_12 0x20c3 +MX28_PAD_SSP1_CMD__GPIO_2_13 0x20d3 +MX28_PAD_SSP1_DATA0__GPIO_2_14 0x20e3 +MX28_PAD_SSP1_DATA3__GPIO_2_15 0x20f3 +MX28_PAD_SSP2_SCK__GPIO_2_16 0x2103 +MX28_PAD_SSP2_MOSI__GPIO_2_17 0x2113 +MX28_PAD_SSP2_MISO__GPIO_2_18 0x2123 +MX28_PAD_SSP2_SS0__GPIO_2_19 0x2133 +MX28_PAD_SSP2_SS1__GPIO_2_20 0x2143 +MX28_PAD_SSP2_SS2__GPIO_2_21 0x2153 +MX28_PAD_SSP3_SCK__GPIO_2_24 0x2183 +MX28_PAD_SSP3_MOSI__GPIO_2_25 0x2193 +MX28_PAD_SSP3_MISO__GPIO_2_26 0x21a3 +MX28_PAD_SSP3_SS0__GPIO_2_27 0x21b3 +MX28_PAD_AUART0_RX__GPIO_3_0 0x3003 +MX28_PAD_AUART0_TX__GPIO_3_1 0x3013 +MX28_PAD_AUART0_CTS__GPIO_3_2 0x3023 +MX28_PAD_AUART0_RTS__GPIO_3_3 0x3033 +MX28_PAD_AUART1_RX__GPIO_3_4 0x3043 +MX28_PAD_AUART1_TX__GPIO_3_5 0x3053 +MX28_PAD_AUART1_CTS__GPIO_3_6 0x3063 +MX28_PAD_AUART1_RTS__GPIO_3_7 0x3073 +MX28_PAD_AUART2_RX__GPIO_3_8 0x3083 +MX28_PAD_AUART2_TX__GPIO_3_9 0x3093 +MX28_PAD_AUART2_CTS__GPIO_3_10 0x30a3 +MX28_PAD_AUART2_RTS__GPIO_3_11 0x30b3 +MX28_PAD_AUART3_RX__GPIO_3_12 0x30c3 +MX28_PAD_AUART3_TX__GPIO_3_13 0x30d3 +MX28_PAD_AUART3_CTS__GPIO_3_14 0x30e3 +MX28_PAD_AUART3_RTS__GPIO_3_15 0x30f3 +MX28_PAD_PWM0__GPIO_3_16 0x3103 +MX28_PAD_PWM1__GPIO_3_17 0x3113 +MX28_PAD_PWM2__GPIO_3_18 0x3123 +MX28_PAD_SAIF0_MCLK__GPIO_3_20 0x3143 +MX28_PAD_SAIF0_LRCLK__GPIO_3_21 0x3153 +MX28_PAD_SAIF0_BITCLK__GPIO_3_22 0x3163 +MX28_PAD_SAIF0_SDATA0__GPIO_3_23 0x3173 +MX28_PAD_I2C0_SCL__GPIO_3_24 0x3183 +MX28_PAD_I2C0_SDA__GPIO_3_25 0x3193 +MX28_PAD_SAIF1_SDATA0__GPIO_3_26 0x31a3 +MX28_PAD_SPDIF__GPIO_3_27 0x31b3 +MX28_PAD_PWM3__GPIO_3_28 0x31c3 +MX28_PAD_PWM4__GPIO_3_29 0x31d3 +MX28_PAD_LCD_RESET__GPIO_3_30 0x31e3 +MX28_PAD_ENET0_MDC__GPIO_4_0 0x4003 +MX28_PAD_ENET0_MDIO__GPIO_4_1 0x4013 +MX28_PAD_ENET0_RX_EN__GPIO_4_2 0x4023 +MX28_PAD_ENET0_RXD0__GPIO_4_3 0x4033 +MX28_PAD_ENET0_RXD1__GPIO_4_4 0x4043 +MX28_PAD_ENET0_TX_CLK__GPIO_4_5 0x4053 +MX28_PAD_ENET0_TX_EN__GPIO_4_6 0x4063 +MX28_PAD_ENET0_TXD0__GPIO_4_7 0x4073 +MX28_PAD_ENET0_TXD1__GPIO_4_8 0x4083 +MX28_PAD_ENET0_RXD2__GPIO_4_9 0x4093 +MX28_PAD_ENET0_RXD3__GPIO_4_10 0x40a3 +MX28_PAD_ENET0_TXD2__GPIO_4_11 0x40b3 +MX28_PAD_ENET0_TXD3__GPIO_4_12 0x40c3 +MX28_PAD_ENET0_RX_CLK__GPIO_4_13 0x40d3 +MX28_PAD_ENET0_COL__GPIO_4_14 0x40e3 +MX28_PAD_ENET0_CRS__GPIO_4_15 0x40f3 +MX28_PAD_ENET_CLK__GPIO_4_16 0x4103 +MX28_PAD_JTAG_RTCK__GPIO_4_20 0x4143 + +Valid values for i.MX23 pinmux-id: + +pinmux id +------ -- +MX23_PAD_GPMI_D00__GPMI_D00 0x0000 +MX23_PAD_GPMI_D01__GPMI_D01 0x0010 +MX23_PAD_GPMI_D02__GPMI_D02 0x0020 +MX23_PAD_GPMI_D03__GPMI_D03 0x0030 +MX23_PAD_GPMI_D04__GPMI_D04 0x0040 +MX23_PAD_GPMI_D05__GPMI_D05 0x0050 +MX23_PAD_GPMI_D06__GPMI_D06 0x0060 +MX23_PAD_GPMI_D07__GPMI_D07 0x0070 +MX23_PAD_GPMI_D08__GPMI_D08 0x0080 +MX23_PAD_GPMI_D09__GPMI_D09 0x0090 +MX23_PAD_GPMI_D10__GPMI_D10 0x00a0 +MX23_PAD_GPMI_D11__GPMI_D11 0x00b0 +MX23_PAD_GPMI_D12__GPMI_D12 0x00c0 +MX23_PAD_GPMI_D13__GPMI_D13 0x00d0 +MX23_PAD_GPMI_D14__GPMI_D14 0x00e0 +MX23_PAD_GPMI_D15__GPMI_D15 0x00f0 +MX23_PAD_GPMI_CLE__GPMI_CLE 0x0100 +MX23_PAD_GPMI_ALE__GPMI_ALE 0x0110 +MX23_PAD_GPMI_CE2N__GPMI_CE2N 0x0120 +MX23_PAD_GPMI_RDY0__GPMI_RDY0 0x0130 +MX23_PAD_GPMI_RDY1__GPMI_RDY1 0x0140 +MX23_PAD_GPMI_RDY2__GPMI_RDY2 0x0150 +MX23_PAD_GPMI_RDY3__GPMI_RDY3 0x0160 +MX23_PAD_GPMI_WPN__GPMI_WPN 0x0170 +MX23_PAD_GPMI_WRN__GPMI_WRN 0x0180 +MX23_PAD_GPMI_RDN__GPMI_RDN 0x0190 +MX23_PAD_AUART1_CTS__AUART1_CTS 0x01a0 +MX23_PAD_AUART1_RTS__AUART1_RTS 0x01b0 +MX23_PAD_AUART1_RX__AUART1_RX 0x01c0 +MX23_PAD_AUART1_TX__AUART1_TX 0x01d0 +MX23_PAD_I2C_SCL__I2C_SCL 0x01e0 +MX23_PAD_I2C_SDA__I2C_SDA 0x01f0 +MX23_PAD_LCD_D00__LCD_D00 0x1000 +MX23_PAD_LCD_D01__LCD_D01 0x1010 +MX23_PAD_LCD_D02__LCD_D02 0x1020 +MX23_PAD_LCD_D03__LCD_D03 0x1030 +MX23_PAD_LCD_D04__LCD_D04 0x1040 +MX23_PAD_LCD_D05__LCD_D05 0x1050 +MX23_PAD_LCD_D06__LCD_D06 0x1060 +MX23_PAD_LCD_D07__LCD_D07 0x1070 +MX23_PAD_LCD_D08__LCD_D08 0x1080 +MX23_PAD_LCD_D09__LCD_D09 0x1090 +MX23_PAD_LCD_D10__LCD_D10 0x10a0 +MX23_PAD_LCD_D11__LCD_D11 0x10b0 +MX23_PAD_LCD_D12__LCD_D12 0x10c0 +MX23_PAD_LCD_D13__LCD_D13 0x10d0 +MX23_PAD_LCD_D14__LCD_D14 0x10e0 +MX23_PAD_LCD_D15__LCD_D15 0x10f0 +MX23_PAD_LCD_D16__LCD_D16 0x1100 +MX23_PAD_LCD_D17__LCD_D17 0x1110 +MX23_PAD_LCD_RESET__LCD_RESET 0x1120 +MX23_PAD_LCD_RS__LCD_RS 0x1130 +MX23_PAD_LCD_WR__LCD_WR 0x1140 +MX23_PAD_LCD_CS__LCD_CS 0x1150 +MX23_PAD_LCD_DOTCK__LCD_DOTCK 0x1160 +MX23_PAD_LCD_ENABLE__LCD_ENABLE 0x1170 +MX23_PAD_LCD_HSYNC__LCD_HSYNC 0x1180 +MX23_PAD_LCD_VSYNC__LCD_VSYNC 0x1190 +MX23_PAD_PWM0__PWM0 0x11a0 +MX23_PAD_PWM1__PWM1 0x11b0 +MX23_PAD_PWM2__PWM2 0x11c0 +MX23_PAD_PWM3__PWM3 0x11d0 +MX23_PAD_PWM4__PWM4 0x11e0 +MX23_PAD_SSP1_CMD__SSP1_CMD 0x2000 +MX23_PAD_SSP1_DETECT__SSP1_DETECT 0x2010 +MX23_PAD_SSP1_DATA0__SSP1_DATA0 0x2020 +MX23_PAD_SSP1_DATA1__SSP1_DATA1 0x2030 +MX23_PAD_SSP1_DATA2__SSP1_DATA2 0x2040 +MX23_PAD_SSP1_DATA3__SSP1_DATA3 0x2050 +MX23_PAD_SSP1_SCK__SSP1_SCK 0x2060 +MX23_PAD_ROTARYA__ROTARYA 0x2070 +MX23_PAD_ROTARYB__ROTARYB 0x2080 +MX23_PAD_EMI_A00__EMI_A00 0x2090 +MX23_PAD_EMI_A01__EMI_A01 0x20a0 +MX23_PAD_EMI_A02__EMI_A02 0x20b0 +MX23_PAD_EMI_A03__EMI_A03 0x20c0 +MX23_PAD_EMI_A04__EMI_A04 0x20d0 +MX23_PAD_EMI_A05__EMI_A05 0x20e0 +MX23_PAD_EMI_A06__EMI_A06 0x20f0 +MX23_PAD_EMI_A07__EMI_A07 0x2100 +MX23_PAD_EMI_A08__EMI_A08 0x2110 +MX23_PAD_EMI_A09__EMI_A09 0x2120 +MX23_PAD_EMI_A10__EMI_A10 0x2130 +MX23_PAD_EMI_A11__EMI_A11 0x2140 +MX23_PAD_EMI_A12__EMI_A12 0x2150 +MX23_PAD_EMI_BA0__EMI_BA0 0x2160 +MX23_PAD_EMI_BA1__EMI_BA1 0x2170 +MX23_PAD_EMI_CASN__EMI_CASN 0x2180 +MX23_PAD_EMI_CE0N__EMI_CE0N 0x2190 +MX23_PAD_EMI_CE1N__EMI_CE1N 0x21a0 +MX23_PAD_GPMI_CE1N__GPMI_CE1N 0x21b0 +MX23_PAD_GPMI_CE0N__GPMI_CE0N 0x21c0 +MX23_PAD_EMI_CKE__EMI_CKE 0x21d0 +MX23_PAD_EMI_RASN__EMI_RASN 0x21e0 +MX23_PAD_EMI_WEN__EMI_WEN 0x21f0 +MX23_PAD_EMI_D00__EMI_D00 0x3000 +MX23_PAD_EMI_D01__EMI_D01 0x3010 +MX23_PAD_EMI_D02__EMI_D02 0x3020 +MX23_PAD_EMI_D03__EMI_D03 0x3030 +MX23_PAD_EMI_D04__EMI_D04 0x3040 +MX23_PAD_EMI_D05__EMI_D05 0x3050 +MX23_PAD_EMI_D06__EMI_D06 0x3060 +MX23_PAD_EMI_D07__EMI_D07 0x3070 +MX23_PAD_EMI_D08__EMI_D08 0x3080 +MX23_PAD_EMI_D09__EMI_D09 0x3090 +MX23_PAD_EMI_D10__EMI_D10 0x30a0 +MX23_PAD_EMI_D11__EMI_D11 0x30b0 +MX23_PAD_EMI_D12__EMI_D12 0x30c0 +MX23_PAD_EMI_D13__EMI_D13 0x30d0 +MX23_PAD_EMI_D14__EMI_D14 0x30e0 +MX23_PAD_EMI_D15__EMI_D15 0x30f0 +MX23_PAD_EMI_DQM0__EMI_DQM0 0x3100 +MX23_PAD_EMI_DQM1__EMI_DQM1 0x3110 +MX23_PAD_EMI_DQS0__EMI_DQS0 0x3120 +MX23_PAD_EMI_DQS1__EMI_DQS1 0x3130 +MX23_PAD_EMI_CLK__EMI_CLK 0x3140 +MX23_PAD_EMI_CLKN__EMI_CLKN 0x3150 +MX23_PAD_GPMI_D00__LCD_D8 0x0001 +MX23_PAD_GPMI_D01__LCD_D9 0x0011 +MX23_PAD_GPMI_D02__LCD_D10 0x0021 +MX23_PAD_GPMI_D03__LCD_D11 0x0031 +MX23_PAD_GPMI_D04__LCD_D12 0x0041 +MX23_PAD_GPMI_D05__LCD_D13 0x0051 +MX23_PAD_GPMI_D06__LCD_D14 0x0061 +MX23_PAD_GPMI_D07__LCD_D15 0x0071 +MX23_PAD_GPMI_D08__LCD_D18 0x0081 +MX23_PAD_GPMI_D09__LCD_D19 0x0091 +MX23_PAD_GPMI_D10__LCD_D20 0x00a1 +MX23_PAD_GPMI_D11__LCD_D21 0x00b1 +MX23_PAD_GPMI_D12__LCD_D22 0x00c1 +MX23_PAD_GPMI_D13__LCD_D23 0x00d1 +MX23_PAD_GPMI_D14__AUART2_RX 0x00e1 +MX23_PAD_GPMI_D15__AUART2_TX 0x00f1 +MX23_PAD_GPMI_CLE__LCD_D16 0x0101 +MX23_PAD_GPMI_ALE__LCD_D17 0x0111 +MX23_PAD_GPMI_CE2N__ATA_A2 0x0121 +MX23_PAD_AUART1_RTS__IR_CLK 0x01b1 +MX23_PAD_AUART1_RX__IR_RX 0x01c1 +MX23_PAD_AUART1_TX__IR_TX 0x01d1 +MX23_PAD_I2C_SCL__GPMI_RDY2 0x01e1 +MX23_PAD_I2C_SDA__GPMI_CE2N 0x01f1 +MX23_PAD_LCD_D00__ETM_DA8 0x1001 +MX23_PAD_LCD_D01__ETM_DA9 0x1011 +MX23_PAD_LCD_D02__ETM_DA10 0x1021 +MX23_PAD_LCD_D03__ETM_DA11 0x1031 +MX23_PAD_LCD_D04__ETM_DA12 0x1041 +MX23_PAD_LCD_D05__ETM_DA13 0x1051 +MX23_PAD_LCD_D06__ETM_DA14 0x1061 +MX23_PAD_LCD_D07__ETM_DA15 0x1071 +MX23_PAD_LCD_D08__ETM_DA0 0x1081 +MX23_PAD_LCD_D09__ETM_DA1 0x1091 +MX23_PAD_LCD_D10__ETM_DA2 0x10a1 +MX23_PAD_LCD_D11__ETM_DA3 0x10b1 +MX23_PAD_LCD_D12__ETM_DA4 0x10c1 +MX23_PAD_LCD_D13__ETM_DA5 0x10d1 +MX23_PAD_LCD_D14__ETM_DA6 0x10e1 +MX23_PAD_LCD_D15__ETM_DA7 0x10f1 +MX23_PAD_LCD_RESET__ETM_TCTL 0x1121 +MX23_PAD_LCD_RS__ETM_TCLK 0x1131 +MX23_PAD_LCD_DOTCK__GPMI_RDY3 0x1161 +MX23_PAD_LCD_ENABLE__I2C_SCL 0x1171 +MX23_PAD_LCD_HSYNC__I2C_SDA 0x1181 +MX23_PAD_LCD_VSYNC__LCD_BUSY 0x1191 +MX23_PAD_PWM0__ROTARYA 0x11a1 +MX23_PAD_PWM1__ROTARYB 0x11b1 +MX23_PAD_PWM2__GPMI_RDY3 0x11c1 +MX23_PAD_PWM3__ETM_TCTL 0x11d1 +MX23_PAD_PWM4__ETM_TCLK 0x11e1 +MX23_PAD_SSP1_DETECT__GPMI_CE3N 0x2011 +MX23_PAD_SSP1_DATA1__I2C_SCL 0x2031 +MX23_PAD_SSP1_DATA2__I2C_SDA 0x2041 +MX23_PAD_ROTARYA__AUART2_RTS 0x2071 +MX23_PAD_ROTARYB__AUART2_CTS 0x2081 +MX23_PAD_GPMI_D00__SSP2_DATA0 0x0002 +MX23_PAD_GPMI_D01__SSP2_DATA1 0x0012 +MX23_PAD_GPMI_D02__SSP2_DATA2 0x0022 +MX23_PAD_GPMI_D03__SSP2_DATA3 0x0032 +MX23_PAD_GPMI_D04__SSP2_DATA4 0x0042 +MX23_PAD_GPMI_D05__SSP2_DATA5 0x0052 +MX23_PAD_GPMI_D06__SSP2_DATA6 0x0062 +MX23_PAD_GPMI_D07__SSP2_DATA7 0x0072 +MX23_PAD_GPMI_D08__SSP1_DATA4 0x0082 +MX23_PAD_GPMI_D09__SSP1_DATA5 0x0092 +MX23_PAD_GPMI_D10__SSP1_DATA6 0x00a2 +MX23_PAD_GPMI_D11__SSP1_DATA7 0x00b2 +MX23_PAD_GPMI_D15__GPMI_CE3N 0x00f2 +MX23_PAD_GPMI_RDY0__SSP2_DETECT 0x0132 +MX23_PAD_GPMI_RDY1__SSP2_CMD 0x0142 +MX23_PAD_GPMI_WRN__SSP2_SCK 0x0182 +MX23_PAD_AUART1_CTS__SSP1_DATA4 0x01a2 +MX23_PAD_AUART1_RTS__SSP1_DATA5 0x01b2 +MX23_PAD_AUART1_RX__SSP1_DATA6 0x01c2 +MX23_PAD_AUART1_TX__SSP1_DATA7 0x01d2 +MX23_PAD_I2C_SCL__AUART1_TX 0x01e2 +MX23_PAD_I2C_SDA__AUART1_RX 0x01f2 +MX23_PAD_LCD_D08__SAIF2_SDATA0 0x1082 +MX23_PAD_LCD_D09__SAIF1_SDATA0 0x1092 +MX23_PAD_LCD_D10__SAIF_MCLK_BITCLK 0x10a2 +MX23_PAD_LCD_D11__SAIF_LRCLK 0x10b2 +MX23_PAD_LCD_D12__SAIF2_SDATA1 0x10c2 +MX23_PAD_LCD_D13__SAIF2_SDATA2 0x10d2 +MX23_PAD_LCD_D14__SAIF1_SDATA2 0x10e2 +MX23_PAD_LCD_D15__SAIF1_SDATA1 0x10f2 +MX23_PAD_LCD_D16__SAIF_ALT_BITCLK 0x1102 +MX23_PAD_LCD_RESET__GPMI_CE3N 0x1122 +MX23_PAD_PWM0__DUART_RX 0x11a2 +MX23_PAD_PWM1__DUART_TX 0x11b2 +MX23_PAD_PWM3__AUART1_CTS 0x11d2 +MX23_PAD_PWM4__AUART1_RTS 0x11e2 +MX23_PAD_SSP1_CMD__JTAG_TDO 0x2002 +MX23_PAD_SSP1_DETECT__USB_OTG_ID 0x2012 +MX23_PAD_SSP1_DATA0__JTAG_TDI 0x2022 +MX23_PAD_SSP1_DATA1__JTAG_TCLK 0x2032 +MX23_PAD_SSP1_DATA2__JTAG_RTCK 0x2042 +MX23_PAD_SSP1_DATA3__JTAG_TMS 0x2052 +MX23_PAD_SSP1_SCK__JTAG_TRST 0x2062 +MX23_PAD_ROTARYA__SPDIF 0x2072 +MX23_PAD_ROTARYB__GPMI_CE3N 0x2082 +MX23_PAD_GPMI_D00__GPIO_0_0 0x0003 +MX23_PAD_GPMI_D01__GPIO_0_1 0x0013 +MX23_PAD_GPMI_D02__GPIO_0_2 0x0023 +MX23_PAD_GPMI_D03__GPIO_0_3 0x0033 +MX23_PAD_GPMI_D04__GPIO_0_4 0x0043 +MX23_PAD_GPMI_D05__GPIO_0_5 0x0053 +MX23_PAD_GPMI_D06__GPIO_0_6 0x0063 +MX23_PAD_GPMI_D07__GPIO_0_7 0x0073 +MX23_PAD_GPMI_D08__GPIO_0_8 0x0083 +MX23_PAD_GPMI_D09__GPIO_0_9 0x0093 +MX23_PAD_GPMI_D10__GPIO_0_10 0x00a3 +MX23_PAD_GPMI_D11__GPIO_0_11 0x00b3 +MX23_PAD_GPMI_D12__GPIO_0_12 0x00c3 +MX23_PAD_GPMI_D13__GPIO_0_13 0x00d3 +MX23_PAD_GPMI_D14__GPIO_0_14 0x00e3 +MX23_PAD_GPMI_D15__GPIO_0_15 0x00f3 +MX23_PAD_GPMI_CLE__GPIO_0_16 0x0103 +MX23_PAD_GPMI_ALE__GPIO_0_17 0x0113 +MX23_PAD_GPMI_CE2N__GPIO_0_18 0x0123 +MX23_PAD_GPMI_RDY0__GPIO_0_19 0x0133 +MX23_PAD_GPMI_RDY1__GPIO_0_20 0x0143 +MX23_PAD_GPMI_RDY2__GPIO_0_21 0x0153 +MX23_PAD_GPMI_RDY3__GPIO_0_22 0x0163 +MX23_PAD_GPMI_WPN__GPIO_0_23 0x0173 +MX23_PAD_GPMI_WRN__GPIO_0_24 0x0183 +MX23_PAD_GPMI_RDN__GPIO_0_25 0x0193 +MX23_PAD_AUART1_CTS__GPIO_0_26 0x01a3 +MX23_PAD_AUART1_RTS__GPIO_0_27 0x01b3 +MX23_PAD_AUART1_RX__GPIO_0_28 0x01c3 +MX23_PAD_AUART1_TX__GPIO_0_29 0x01d3 +MX23_PAD_I2C_SCL__GPIO_0_30 0x01e3 +MX23_PAD_I2C_SDA__GPIO_0_31 0x01f3 +MX23_PAD_LCD_D00__GPIO_1_0 0x1003 +MX23_PAD_LCD_D01__GPIO_1_1 0x1013 +MX23_PAD_LCD_D02__GPIO_1_2 0x1023 +MX23_PAD_LCD_D03__GPIO_1_3 0x1033 +MX23_PAD_LCD_D04__GPIO_1_4 0x1043 +MX23_PAD_LCD_D05__GPIO_1_5 0x1053 +MX23_PAD_LCD_D06__GPIO_1_6 0x1063 +MX23_PAD_LCD_D07__GPIO_1_7 0x1073 +MX23_PAD_LCD_D08__GPIO_1_8 0x1083 +MX23_PAD_LCD_D09__GPIO_1_9 0x1093 +MX23_PAD_LCD_D10__GPIO_1_10 0x10a3 +MX23_PAD_LCD_D11__GPIO_1_11 0x10b3 +MX23_PAD_LCD_D12__GPIO_1_12 0x10c3 +MX23_PAD_LCD_D13__GPIO_1_13 0x10d3 +MX23_PAD_LCD_D14__GPIO_1_14 0x10e3 +MX23_PAD_LCD_D15__GPIO_1_15 0x10f3 +MX23_PAD_LCD_D16__GPIO_1_16 0x1103 +MX23_PAD_LCD_D17__GPIO_1_17 0x1113 +MX23_PAD_LCD_RESET__GPIO_1_18 0x1123 +MX23_PAD_LCD_RS__GPIO_1_19 0x1133 +MX23_PAD_LCD_WR__GPIO_1_20 0x1143 +MX23_PAD_LCD_CS__GPIO_1_21 0x1153 +MX23_PAD_LCD_DOTCK__GPIO_1_22 0x1163 +MX23_PAD_LCD_ENABLE__GPIO_1_23 0x1173 +MX23_PAD_LCD_HSYNC__GPIO_1_24 0x1183 +MX23_PAD_LCD_VSYNC__GPIO_1_25 0x1193 +MX23_PAD_PWM0__GPIO_1_26 0x11a3 +MX23_PAD_PWM1__GPIO_1_27 0x11b3 +MX23_PAD_PWM2__GPIO_1_28 0x11c3 +MX23_PAD_PWM3__GPIO_1_29 0x11d3 +MX23_PAD_PWM4__GPIO_1_30 0x11e3 +MX23_PAD_SSP1_CMD__GPIO_2_0 0x2003 +MX23_PAD_SSP1_DETECT__GPIO_2_1 0x2013 +MX23_PAD_SSP1_DATA0__GPIO_2_2 0x2023 +MX23_PAD_SSP1_DATA1__GPIO_2_3 0x2033 +MX23_PAD_SSP1_DATA2__GPIO_2_4 0x2043 +MX23_PAD_SSP1_DATA3__GPIO_2_5 0x2053 +MX23_PAD_SSP1_SCK__GPIO_2_6 0x2063 +MX23_PAD_ROTARYA__GPIO_2_7 0x2073 +MX23_PAD_ROTARYB__GPIO_2_8 0x2083 +MX23_PAD_EMI_A00__GPIO_2_9 0x2093 +MX23_PAD_EMI_A01__GPIO_2_10 0x20a3 +MX23_PAD_EMI_A02__GPIO_2_11 0x20b3 +MX23_PAD_EMI_A03__GPIO_2_12 0x20c3 +MX23_PAD_EMI_A04__GPIO_2_13 0x20d3 +MX23_PAD_EMI_A05__GPIO_2_14 0x20e3 +MX23_PAD_EMI_A06__GPIO_2_15 0x20f3 +MX23_PAD_EMI_A07__GPIO_2_16 0x2103 +MX23_PAD_EMI_A08__GPIO_2_17 0x2113 +MX23_PAD_EMI_A09__GPIO_2_18 0x2123 +MX23_PAD_EMI_A10__GPIO_2_19 0x2133 +MX23_PAD_EMI_A11__GPIO_2_20 0x2143 +MX23_PAD_EMI_A12__GPIO_2_21 0x2153 +MX23_PAD_EMI_BA0__GPIO_2_22 0x2163 +MX23_PAD_EMI_BA1__GPIO_2_23 0x2173 +MX23_PAD_EMI_CASN__GPIO_2_24 0x2183 +MX23_PAD_EMI_CE0N__GPIO_2_25 0x2193 +MX23_PAD_EMI_CE1N__GPIO_2_26 0x21a3 +MX23_PAD_GPMI_CE1N__GPIO_2_27 0x21b3 +MX23_PAD_GPMI_CE0N__GPIO_2_28 0x21c3 +MX23_PAD_EMI_CKE__GPIO_2_29 0x21d3 +MX23_PAD_EMI_RASN__GPIO_2_30 0x21e3 +MX23_PAD_EMI_WEN__GPIO_2_31 0x21f3 diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig index 40d78aa5bca2..73f2fd66d658 100644 --- a/drivers/pinctrl/Kconfig +++ b/drivers/pinctrl/Kconfig @@ -49,6 +49,21 @@ config PINCTRL_MMP2 select PINCTRL_PXA3xx select PINCONF +config PINCTRL_MXS + bool + +config PINCTRL_IMX23 + bool + select PINMUX + select PINCONF + select PINCTRL_MXS + +config PINCTRL_IMX28 + bool + select PINMUX + select PINCONF + select PINCTRL_MXS + config PINCTRL_PXA168 bool "PXA168 pin controller driver" depends on ARCH_MMP diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile index 133261d821a3..5f5a0a6414a5 100644 --- a/drivers/pinctrl/Makefile +++ b/drivers/pinctrl/Makefile @@ -13,6 +13,9 @@ obj-$(CONFIG_PINCTRL_IMX) += pinctrl-imx.o obj-$(CONFIG_PINCTRL_IMX6Q) += pinctrl-imx6q.o obj-$(CONFIG_PINCTRL_PXA3xx) += pinctrl-pxa3xx.o obj-$(CONFIG_PINCTRL_MMP2) += pinctrl-mmp2.o +obj-$(CONFIG_PINCTRL_MXS) += pinctrl-mxs.o +obj-$(CONFIG_PINCTRL_IMX23) += pinctrl-imx23.o +obj-$(CONFIG_PINCTRL_IMX28) += pinctrl-imx28.o obj-$(CONFIG_PINCTRL_PXA168) += pinctrl-pxa168.o obj-$(CONFIG_PINCTRL_PXA910) += pinctrl-pxa910.o obj-$(CONFIG_PINCTRL_SIRF) += pinctrl-sirf.o diff --git a/drivers/pinctrl/pinctrl-imx23.c b/drivers/pinctrl/pinctrl-imx23.c new file mode 100644 index 000000000000..75d3eff94296 --- /dev/null +++ b/drivers/pinctrl/pinctrl-imx23.c @@ -0,0 +1,305 @@ +/* + * Copyright 2012 Freescale Semiconductor, Inc. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include +#include +#include +#include +#include "pinctrl-mxs.h" + +enum imx23_pin_enum { + GPMI_D00 = PINID(0, 0), + GPMI_D01 = PINID(0, 1), + GPMI_D02 = PINID(0, 2), + GPMI_D03 = PINID(0, 3), + GPMI_D04 = PINID(0, 4), + GPMI_D05 = PINID(0, 5), + GPMI_D06 = PINID(0, 6), + GPMI_D07 = PINID(0, 7), + GPMI_D08 = PINID(0, 8), + GPMI_D09 = PINID(0, 9), + GPMI_D10 = PINID(0, 10), + GPMI_D11 = PINID(0, 11), + GPMI_D12 = PINID(0, 12), + GPMI_D13 = PINID(0, 13), + GPMI_D14 = PINID(0, 14), + GPMI_D15 = PINID(0, 15), + GPMI_CLE = PINID(0, 16), + GPMI_ALE = PINID(0, 17), + GPMI_CE2N = PINID(0, 18), + GPMI_RDY0 = PINID(0, 19), + GPMI_RDY1 = PINID(0, 20), + GPMI_RDY2 = PINID(0, 21), + GPMI_RDY3 = PINID(0, 22), + GPMI_WPN = PINID(0, 23), + GPMI_WRN = PINID(0, 24), + GPMI_RDN = PINID(0, 25), + AUART1_CTS = PINID(0, 26), + AUART1_RTS = PINID(0, 27), + AUART1_RX = PINID(0, 28), + AUART1_TX = PINID(0, 29), + I2C_SCL = PINID(0, 30), + I2C_SDA = PINID(0, 31), + LCD_D00 = PINID(1, 0), + LCD_D01 = PINID(1, 1), + LCD_D02 = PINID(1, 2), + LCD_D03 = PINID(1, 3), + LCD_D04 = PINID(1, 4), + LCD_D05 = PINID(1, 5), + LCD_D06 = PINID(1, 6), + LCD_D07 = PINID(1, 7), + LCD_D08 = PINID(1, 8), + LCD_D09 = PINID(1, 9), + LCD_D10 = PINID(1, 10), + LCD_D11 = PINID(1, 11), + LCD_D12 = PINID(1, 12), + LCD_D13 = PINID(1, 13), + LCD_D14 = PINID(1, 14), + LCD_D15 = PINID(1, 15), + LCD_D16 = PINID(1, 16), + LCD_D17 = PINID(1, 17), + LCD_RESET = PINID(1, 18), + LCD_RS = PINID(1, 19), + LCD_WR = PINID(1, 20), + LCD_CS = PINID(1, 21), + LCD_DOTCK = PINID(1, 22), + LCD_ENABLE = PINID(1, 23), + LCD_HSYNC = PINID(1, 24), + LCD_VSYNC = PINID(1, 25), + PWM0 = PINID(1, 26), + PWM1 = PINID(1, 27), + PWM2 = PINID(1, 28), + PWM3 = PINID(1, 29), + PWM4 = PINID(1, 30), + SSP1_CMD = PINID(2, 0), + SSP1_DETECT = PINID(2, 1), + SSP1_DATA0 = PINID(2, 2), + SSP1_DATA1 = PINID(2, 3), + SSP1_DATA2 = PINID(2, 4), + SSP1_DATA3 = PINID(2, 5), + SSP1_SCK = PINID(2, 6), + ROTARYA = PINID(2, 7), + ROTARYB = PINID(2, 8), + EMI_A00 = PINID(2, 9), + EMI_A01 = PINID(2, 10), + EMI_A02 = PINID(2, 11), + EMI_A03 = PINID(2, 12), + EMI_A04 = PINID(2, 13), + EMI_A05 = PINID(2, 14), + EMI_A06 = PINID(2, 15), + EMI_A07 = PINID(2, 16), + EMI_A08 = PINID(2, 17), + EMI_A09 = PINID(2, 18), + EMI_A10 = PINID(2, 19), + EMI_A11 = PINID(2, 20), + EMI_A12 = PINID(2, 21), + EMI_BA0 = PINID(2, 22), + EMI_BA1 = PINID(2, 23), + EMI_CASN = PINID(2, 24), + EMI_CE0N = PINID(2, 25), + EMI_CE1N = PINID(2, 26), + GPMI_CE1N = PINID(2, 27), + GPMI_CE0N = PINID(2, 28), + EMI_CKE = PINID(2, 29), + EMI_RASN = PINID(2, 30), + EMI_WEN = PINID(2, 31), + EMI_D00 = PINID(3, 0), + EMI_D01 = PINID(3, 1), + EMI_D02 = PINID(3, 2), + EMI_D03 = PINID(3, 3), + EMI_D04 = PINID(3, 4), + EMI_D05 = PINID(3, 5), + EMI_D06 = PINID(3, 6), + EMI_D07 = PINID(3, 7), + EMI_D08 = PINID(3, 8), + EMI_D09 = PINID(3, 9), + EMI_D10 = PINID(3, 10), + EMI_D11 = PINID(3, 11), + EMI_D12 = PINID(3, 12), + EMI_D13 = PINID(3, 13), + EMI_D14 = PINID(3, 14), + EMI_D15 = PINID(3, 15), + EMI_DQM0 = PINID(3, 16), + EMI_DQM1 = PINID(3, 17), + EMI_DQS0 = PINID(3, 18), + EMI_DQS1 = PINID(3, 19), + EMI_CLK = PINID(3, 20), + EMI_CLKN = PINID(3, 21), +}; + +static const struct pinctrl_pin_desc imx23_pins[] = { + MXS_PINCTRL_PIN(GPMI_D00), + MXS_PINCTRL_PIN(GPMI_D01), + MXS_PINCTRL_PIN(GPMI_D02), + MXS_PINCTRL_PIN(GPMI_D03), + MXS_PINCTRL_PIN(GPMI_D04), + MXS_PINCTRL_PIN(GPMI_D05), + MXS_PINCTRL_PIN(GPMI_D06), + MXS_PINCTRL_PIN(GPMI_D07), + MXS_PINCTRL_PIN(GPMI_D08), + MXS_PINCTRL_PIN(GPMI_D09), + MXS_PINCTRL_PIN(GPMI_D10), + MXS_PINCTRL_PIN(GPMI_D11), + MXS_PINCTRL_PIN(GPMI_D12), + MXS_PINCTRL_PIN(GPMI_D13), + MXS_PINCTRL_PIN(GPMI_D14), + MXS_PINCTRL_PIN(GPMI_D15), + MXS_PINCTRL_PIN(GPMI_CLE), + MXS_PINCTRL_PIN(GPMI_ALE), + MXS_PINCTRL_PIN(GPMI_CE2N), + MXS_PINCTRL_PIN(GPMI_RDY0), + MXS_PINCTRL_PIN(GPMI_RDY1), + MXS_PINCTRL_PIN(GPMI_RDY2), + MXS_PINCTRL_PIN(GPMI_RDY3), + MXS_PINCTRL_PIN(GPMI_WPN), + MXS_PINCTRL_PIN(GPMI_WRN), + MXS_PINCTRL_PIN(GPMI_RDN), + MXS_PINCTRL_PIN(AUART1_CTS), + MXS_PINCTRL_PIN(AUART1_RTS), + MXS_PINCTRL_PIN(AUART1_RX), + MXS_PINCTRL_PIN(AUART1_TX), + MXS_PINCTRL_PIN(I2C_SCL), + MXS_PINCTRL_PIN(I2C_SDA), + MXS_PINCTRL_PIN(LCD_D00), + MXS_PINCTRL_PIN(LCD_D01), + MXS_PINCTRL_PIN(LCD_D02), + MXS_PINCTRL_PIN(LCD_D03), + MXS_PINCTRL_PIN(LCD_D04), + MXS_PINCTRL_PIN(LCD_D05), + MXS_PINCTRL_PIN(LCD_D06), + MXS_PINCTRL_PIN(LCD_D07), + MXS_PINCTRL_PIN(LCD_D08), + MXS_PINCTRL_PIN(LCD_D09), + MXS_PINCTRL_PIN(LCD_D10), + MXS_PINCTRL_PIN(LCD_D11), + MXS_PINCTRL_PIN(LCD_D12), + MXS_PINCTRL_PIN(LCD_D13), + MXS_PINCTRL_PIN(LCD_D14), + MXS_PINCTRL_PIN(LCD_D15), + MXS_PINCTRL_PIN(LCD_D16), + MXS_PINCTRL_PIN(LCD_D17), + MXS_PINCTRL_PIN(LCD_RESET), + MXS_PINCTRL_PIN(LCD_RS), + MXS_PINCTRL_PIN(LCD_WR), + MXS_PINCTRL_PIN(LCD_CS), + MXS_PINCTRL_PIN(LCD_DOTCK), + MXS_PINCTRL_PIN(LCD_ENABLE), + MXS_PINCTRL_PIN(LCD_HSYNC), + MXS_PINCTRL_PIN(LCD_VSYNC), + MXS_PINCTRL_PIN(PWM0), + MXS_PINCTRL_PIN(PWM1), + MXS_PINCTRL_PIN(PWM2), + MXS_PINCTRL_PIN(PWM3), + MXS_PINCTRL_PIN(PWM4), + MXS_PINCTRL_PIN(SSP1_CMD), + MXS_PINCTRL_PIN(SSP1_DETECT), + MXS_PINCTRL_PIN(SSP1_DATA0), + MXS_PINCTRL_PIN(SSP1_DATA1), + MXS_PINCTRL_PIN(SSP1_DATA2), + MXS_PINCTRL_PIN(SSP1_DATA3), + MXS_PINCTRL_PIN(SSP1_SCK), + MXS_PINCTRL_PIN(ROTARYA), + MXS_PINCTRL_PIN(ROTARYB), + MXS_PINCTRL_PIN(EMI_A00), + MXS_PINCTRL_PIN(EMI_A01), + MXS_PINCTRL_PIN(EMI_A02), + MXS_PINCTRL_PIN(EMI_A03), + MXS_PINCTRL_PIN(EMI_A04), + MXS_PINCTRL_PIN(EMI_A05), + MXS_PINCTRL_PIN(EMI_A06), + MXS_PINCTRL_PIN(EMI_A07), + MXS_PINCTRL_PIN(EMI_A08), + MXS_PINCTRL_PIN(EMI_A09), + MXS_PINCTRL_PIN(EMI_A10), + MXS_PINCTRL_PIN(EMI_A11), + MXS_PINCTRL_PIN(EMI_A12), + MXS_PINCTRL_PIN(EMI_BA0), + MXS_PINCTRL_PIN(EMI_BA1), + MXS_PINCTRL_PIN(EMI_CASN), + MXS_PINCTRL_PIN(EMI_CE0N), + MXS_PINCTRL_PIN(EMI_CE1N), + MXS_PINCTRL_PIN(GPMI_CE1N), + MXS_PINCTRL_PIN(GPMI_CE0N), + MXS_PINCTRL_PIN(EMI_CKE), + MXS_PINCTRL_PIN(EMI_RASN), + MXS_PINCTRL_PIN(EMI_WEN), + MXS_PINCTRL_PIN(EMI_D00), + MXS_PINCTRL_PIN(EMI_D01), + MXS_PINCTRL_PIN(EMI_D02), + MXS_PINCTRL_PIN(EMI_D03), + MXS_PINCTRL_PIN(EMI_D04), + MXS_PINCTRL_PIN(EMI_D05), + MXS_PINCTRL_PIN(EMI_D06), + MXS_PINCTRL_PIN(EMI_D07), + MXS_PINCTRL_PIN(EMI_D08), + MXS_PINCTRL_PIN(EMI_D09), + MXS_PINCTRL_PIN(EMI_D10), + MXS_PINCTRL_PIN(EMI_D11), + MXS_PINCTRL_PIN(EMI_D12), + MXS_PINCTRL_PIN(EMI_D13), + MXS_PINCTRL_PIN(EMI_D14), + MXS_PINCTRL_PIN(EMI_D15), + MXS_PINCTRL_PIN(EMI_DQM0), + MXS_PINCTRL_PIN(EMI_DQM1), + MXS_PINCTRL_PIN(EMI_DQS0), + MXS_PINCTRL_PIN(EMI_DQS1), + MXS_PINCTRL_PIN(EMI_CLK), + MXS_PINCTRL_PIN(EMI_CLKN), +}; + +static struct mxs_regs imx23_regs = { + .muxsel = 0x100, + .drive = 0x200, + .pull = 0x400, +}; + +static struct mxs_pinctrl_soc_data imx23_pinctrl_data = { + .regs = &imx23_regs, + .pins = imx23_pins, + .npins = ARRAY_SIZE(imx23_pins), +}; + +static int __devinit imx23_pinctrl_probe(struct platform_device *pdev) +{ + return mxs_pinctrl_probe(pdev, &imx23_pinctrl_data); +} + +static struct of_device_id imx23_pinctrl_of_match[] __devinitdata = { + { .compatible = "fsl,imx23-pinctrl", }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, imx23_pinctrl_of_match); + +static struct platform_driver imx23_pinctrl_driver = { + .driver = { + .name = "imx23-pinctrl", + .owner = THIS_MODULE, + .of_match_table = imx23_pinctrl_of_match, + }, + .probe = imx23_pinctrl_probe, + .remove = __devexit_p(mxs_pinctrl_remove), +}; + +static int __init imx23_pinctrl_init(void) +{ + return platform_driver_register(&imx23_pinctrl_driver); +} +arch_initcall(imx23_pinctrl_init); + +static void __exit imx23_pinctrl_exit(void) +{ + platform_driver_unregister(&imx23_pinctrl_driver); +} +module_exit(imx23_pinctrl_exit); + +MODULE_AUTHOR("Shawn Guo "); +MODULE_DESCRIPTION("Freescale i.MX23 pinctrl driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/pinctrl/pinctrl-imx28.c b/drivers/pinctrl/pinctrl-imx28.c new file mode 100644 index 000000000000..b973026811a2 --- /dev/null +++ b/drivers/pinctrl/pinctrl-imx28.c @@ -0,0 +1,421 @@ +/* + * Copyright 2012 Freescale Semiconductor, Inc. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include +#include +#include +#include +#include "pinctrl-mxs.h" + +enum imx28_pin_enum { + GPMI_D00 = PINID(0, 0), + GPMI_D01 = PINID(0, 1), + GPMI_D02 = PINID(0, 2), + GPMI_D03 = PINID(0, 3), + GPMI_D04 = PINID(0, 4), + GPMI_D05 = PINID(0, 5), + GPMI_D06 = PINID(0, 6), + GPMI_D07 = PINID(0, 7), + GPMI_CE0N = PINID(0, 16), + GPMI_CE1N = PINID(0, 17), + GPMI_CE2N = PINID(0, 18), + GPMI_CE3N = PINID(0, 19), + GPMI_RDY0 = PINID(0, 20), + GPMI_RDY1 = PINID(0, 21), + GPMI_RDY2 = PINID(0, 22), + GPMI_RDY3 = PINID(0, 23), + GPMI_RDN = PINID(0, 24), + GPMI_WRN = PINID(0, 25), + GPMI_ALE = PINID(0, 26), + GPMI_CLE = PINID(0, 27), + GPMI_RESETN = PINID(0, 28), + LCD_D00 = PINID(1, 0), + LCD_D01 = PINID(1, 1), + LCD_D02 = PINID(1, 2), + LCD_D03 = PINID(1, 3), + LCD_D04 = PINID(1, 4), + LCD_D05 = PINID(1, 5), + LCD_D06 = PINID(1, 6), + LCD_D07 = PINID(1, 7), + LCD_D08 = PINID(1, 8), + LCD_D09 = PINID(1, 9), + LCD_D10 = PINID(1, 10), + LCD_D11 = PINID(1, 11), + LCD_D12 = PINID(1, 12), + LCD_D13 = PINID(1, 13), + LCD_D14 = PINID(1, 14), + LCD_D15 = PINID(1, 15), + LCD_D16 = PINID(1, 16), + LCD_D17 = PINID(1, 17), + LCD_D18 = PINID(1, 18), + LCD_D19 = PINID(1, 19), + LCD_D20 = PINID(1, 20), + LCD_D21 = PINID(1, 21), + LCD_D22 = PINID(1, 22), + LCD_D23 = PINID(1, 23), + LCD_RD_E = PINID(1, 24), + LCD_WR_RWN = PINID(1, 25), + LCD_RS = PINID(1, 26), + LCD_CS = PINID(1, 27), + LCD_VSYNC = PINID(1, 28), + LCD_HSYNC = PINID(1, 29), + LCD_DOTCLK = PINID(1, 30), + LCD_ENABLE = PINID(1, 31), + SSP0_DATA0 = PINID(2, 0), + SSP0_DATA1 = PINID(2, 1), + SSP0_DATA2 = PINID(2, 2), + SSP0_DATA3 = PINID(2, 3), + SSP0_DATA4 = PINID(2, 4), + SSP0_DATA5 = PINID(2, 5), + SSP0_DATA6 = PINID(2, 6), + SSP0_DATA7 = PINID(2, 7), + SSP0_CMD = PINID(2, 8), + SSP0_DETECT = PINID(2, 9), + SSP0_SCK = PINID(2, 10), + SSP1_SCK = PINID(2, 12), + SSP1_CMD = PINID(2, 13), + SSP1_DATA0 = PINID(2, 14), + SSP1_DATA3 = PINID(2, 15), + SSP2_SCK = PINID(2, 16), + SSP2_MOSI = PINID(2, 17), + SSP2_MISO = PINID(2, 18), + SSP2_SS0 = PINID(2, 19), + SSP2_SS1 = PINID(2, 20), + SSP2_SS2 = PINID(2, 21), + SSP3_SCK = PINID(2, 24), + SSP3_MOSI = PINID(2, 25), + SSP3_MISO = PINID(2, 26), + SSP3_SS0 = PINID(2, 27), + AUART0_RX = PINID(3, 0), + AUART0_TX = PINID(3, 1), + AUART0_CTS = PINID(3, 2), + AUART0_RTS = PINID(3, 3), + AUART1_RX = PINID(3, 4), + AUART1_TX = PINID(3, 5), + AUART1_CTS = PINID(3, 6), + AUART1_RTS = PINID(3, 7), + AUART2_RX = PINID(3, 8), + AUART2_TX = PINID(3, 9), + AUART2_CTS = PINID(3, 10), + AUART2_RTS = PINID(3, 11), + AUART3_RX = PINID(3, 12), + AUART3_TX = PINID(3, 13), + AUART3_CTS = PINID(3, 14), + AUART3_RTS = PINID(3, 15), + PWM0 = PINID(3, 16), + PWM1 = PINID(3, 17), + PWM2 = PINID(3, 18), + SAIF0_MCLK = PINID(3, 20), + SAIF0_LRCLK = PINID(3, 21), + SAIF0_BITCLK = PINID(3, 22), + SAIF0_SDATA0 = PINID(3, 23), + I2C0_SCL = PINID(3, 24), + I2C0_SDA = PINID(3, 25), + SAIF1_SDATA0 = PINID(3, 26), + SPDIF = PINID(3, 27), + PWM3 = PINID(3, 28), + PWM4 = PINID(3, 29), + LCD_RESET = PINID(3, 30), + ENET0_MDC = PINID(4, 0), + ENET0_MDIO = PINID(4, 1), + ENET0_RX_EN = PINID(4, 2), + ENET0_RXD0 = PINID(4, 3), + ENET0_RXD1 = PINID(4, 4), + ENET0_TX_CLK = PINID(4, 5), + ENET0_TX_EN = PINID(4, 6), + ENET0_TXD0 = PINID(4, 7), + ENET0_TXD1 = PINID(4, 8), + ENET0_RXD2 = PINID(4, 9), + ENET0_RXD3 = PINID(4, 10), + ENET0_TXD2 = PINID(4, 11), + ENET0_TXD3 = PINID(4, 12), + ENET0_RX_CLK = PINID(4, 13), + ENET0_COL = PINID(4, 14), + ENET0_CRS = PINID(4, 15), + ENET_CLK = PINID(4, 16), + JTAG_RTCK = PINID(4, 20), + EMI_D00 = PINID(5, 0), + EMI_D01 = PINID(5, 1), + EMI_D02 = PINID(5, 2), + EMI_D03 = PINID(5, 3), + EMI_D04 = PINID(5, 4), + EMI_D05 = PINID(5, 5), + EMI_D06 = PINID(5, 6), + EMI_D07 = PINID(5, 7), + EMI_D08 = PINID(5, 8), + EMI_D09 = PINID(5, 9), + EMI_D10 = PINID(5, 10), + EMI_D11 = PINID(5, 11), + EMI_D12 = PINID(5, 12), + EMI_D13 = PINID(5, 13), + EMI_D14 = PINID(5, 14), + EMI_D15 = PINID(5, 15), + EMI_ODT0 = PINID(5, 16), + EMI_DQM0 = PINID(5, 17), + EMI_ODT1 = PINID(5, 18), + EMI_DQM1 = PINID(5, 19), + EMI_DDR_OPEN_FB = PINID(5, 20), + EMI_CLK = PINID(5, 21), + EMI_DQS0 = PINID(5, 22), + EMI_DQS1 = PINID(5, 23), + EMI_DDR_OPEN = PINID(5, 26), + EMI_A00 = PINID(6, 0), + EMI_A01 = PINID(6, 1), + EMI_A02 = PINID(6, 2), + EMI_A03 = PINID(6, 3), + EMI_A04 = PINID(6, 4), + EMI_A05 = PINID(6, 5), + EMI_A06 = PINID(6, 6), + EMI_A07 = PINID(6, 7), + EMI_A08 = PINID(6, 8), + EMI_A09 = PINID(6, 9), + EMI_A10 = PINID(6, 10), + EMI_A11 = PINID(6, 11), + EMI_A12 = PINID(6, 12), + EMI_A13 = PINID(6, 13), + EMI_A14 = PINID(6, 14), + EMI_BA0 = PINID(6, 16), + EMI_BA1 = PINID(6, 17), + EMI_BA2 = PINID(6, 18), + EMI_CASN = PINID(6, 19), + EMI_RASN = PINID(6, 20), + EMI_WEN = PINID(6, 21), + EMI_CE0N = PINID(6, 22), + EMI_CE1N = PINID(6, 23), + EMI_CKE = PINID(6, 24), +}; + +static const struct pinctrl_pin_desc imx28_pins[] = { + MXS_PINCTRL_PIN(GPMI_D00), + MXS_PINCTRL_PIN(GPMI_D01), + MXS_PINCTRL_PIN(GPMI_D02), + MXS_PINCTRL_PIN(GPMI_D03), + MXS_PINCTRL_PIN(GPMI_D04), + MXS_PINCTRL_PIN(GPMI_D05), + MXS_PINCTRL_PIN(GPMI_D06), + MXS_PINCTRL_PIN(GPMI_D07), + MXS_PINCTRL_PIN(GPMI_CE0N), + MXS_PINCTRL_PIN(GPMI_CE1N), + MXS_PINCTRL_PIN(GPMI_CE2N), + MXS_PINCTRL_PIN(GPMI_CE3N), + MXS_PINCTRL_PIN(GPMI_RDY0), + MXS_PINCTRL_PIN(GPMI_RDY1), + MXS_PINCTRL_PIN(GPMI_RDY2), + MXS_PINCTRL_PIN(GPMI_RDY3), + MXS_PINCTRL_PIN(GPMI_RDN), + MXS_PINCTRL_PIN(GPMI_WRN), + MXS_PINCTRL_PIN(GPMI_ALE), + MXS_PINCTRL_PIN(GPMI_CLE), + MXS_PINCTRL_PIN(GPMI_RESETN), + MXS_PINCTRL_PIN(LCD_D00), + MXS_PINCTRL_PIN(LCD_D01), + MXS_PINCTRL_PIN(LCD_D02), + MXS_PINCTRL_PIN(LCD_D03), + MXS_PINCTRL_PIN(LCD_D04), + MXS_PINCTRL_PIN(LCD_D05), + MXS_PINCTRL_PIN(LCD_D06), + MXS_PINCTRL_PIN(LCD_D07), + MXS_PINCTRL_PIN(LCD_D08), + MXS_PINCTRL_PIN(LCD_D09), + MXS_PINCTRL_PIN(LCD_D10), + MXS_PINCTRL_PIN(LCD_D11), + MXS_PINCTRL_PIN(LCD_D12), + MXS_PINCTRL_PIN(LCD_D13), + MXS_PINCTRL_PIN(LCD_D14), + MXS_PINCTRL_PIN(LCD_D15), + MXS_PINCTRL_PIN(LCD_D16), + MXS_PINCTRL_PIN(LCD_D17), + MXS_PINCTRL_PIN(LCD_D18), + MXS_PINCTRL_PIN(LCD_D19), + MXS_PINCTRL_PIN(LCD_D20), + MXS_PINCTRL_PIN(LCD_D21), + MXS_PINCTRL_PIN(LCD_D22), + MXS_PINCTRL_PIN(LCD_D23), + MXS_PINCTRL_PIN(LCD_RD_E), + MXS_PINCTRL_PIN(LCD_WR_RWN), + MXS_PINCTRL_PIN(LCD_RS), + MXS_PINCTRL_PIN(LCD_CS), + MXS_PINCTRL_PIN(LCD_VSYNC), + MXS_PINCTRL_PIN(LCD_HSYNC), + MXS_PINCTRL_PIN(LCD_DOTCLK), + MXS_PINCTRL_PIN(LCD_ENABLE), + MXS_PINCTRL_PIN(SSP0_DATA0), + MXS_PINCTRL_PIN(SSP0_DATA1), + MXS_PINCTRL_PIN(SSP0_DATA2), + MXS_PINCTRL_PIN(SSP0_DATA3), + MXS_PINCTRL_PIN(SSP0_DATA4), + MXS_PINCTRL_PIN(SSP0_DATA5), + MXS_PINCTRL_PIN(SSP0_DATA6), + MXS_PINCTRL_PIN(SSP0_DATA7), + MXS_PINCTRL_PIN(SSP0_CMD), + MXS_PINCTRL_PIN(SSP0_DETECT), + MXS_PINCTRL_PIN(SSP0_SCK), + MXS_PINCTRL_PIN(SSP1_SCK), + MXS_PINCTRL_PIN(SSP1_CMD), + MXS_PINCTRL_PIN(SSP1_DATA0), + MXS_PINCTRL_PIN(SSP1_DATA3), + MXS_PINCTRL_PIN(SSP2_SCK), + MXS_PINCTRL_PIN(SSP2_MOSI), + MXS_PINCTRL_PIN(SSP2_MISO), + MXS_PINCTRL_PIN(SSP2_SS0), + MXS_PINCTRL_PIN(SSP2_SS1), + MXS_PINCTRL_PIN(SSP2_SS2), + MXS_PINCTRL_PIN(SSP3_SCK), + MXS_PINCTRL_PIN(SSP3_MOSI), + MXS_PINCTRL_PIN(SSP3_MISO), + MXS_PINCTRL_PIN(SSP3_SS0), + MXS_PINCTRL_PIN(AUART0_RX), + MXS_PINCTRL_PIN(AUART0_TX), + MXS_PINCTRL_PIN(AUART0_CTS), + MXS_PINCTRL_PIN(AUART0_RTS), + MXS_PINCTRL_PIN(AUART1_RX), + MXS_PINCTRL_PIN(AUART1_TX), + MXS_PINCTRL_PIN(AUART1_CTS), + MXS_PINCTRL_PIN(AUART1_RTS), + MXS_PINCTRL_PIN(AUART2_RX), + MXS_PINCTRL_PIN(AUART2_TX), + MXS_PINCTRL_PIN(AUART2_CTS), + MXS_PINCTRL_PIN(AUART2_RTS), + MXS_PINCTRL_PIN(AUART3_RX), + MXS_PINCTRL_PIN(AUART3_TX), + MXS_PINCTRL_PIN(AUART3_CTS), + MXS_PINCTRL_PIN(AUART3_RTS), + MXS_PINCTRL_PIN(PWM0), + MXS_PINCTRL_PIN(PWM1), + MXS_PINCTRL_PIN(PWM2), + MXS_PINCTRL_PIN(SAIF0_MCLK), + MXS_PINCTRL_PIN(SAIF0_LRCLK), + MXS_PINCTRL_PIN(SAIF0_BITCLK), + MXS_PINCTRL_PIN(SAIF0_SDATA0), + MXS_PINCTRL_PIN(I2C0_SCL), + MXS_PINCTRL_PIN(I2C0_SDA), + MXS_PINCTRL_PIN(SAIF1_SDATA0), + MXS_PINCTRL_PIN(SPDIF), + MXS_PINCTRL_PIN(PWM3), + MXS_PINCTRL_PIN(PWM4), + MXS_PINCTRL_PIN(LCD_RESET), + MXS_PINCTRL_PIN(ENET0_MDC), + MXS_PINCTRL_PIN(ENET0_MDIO), + MXS_PINCTRL_PIN(ENET0_RX_EN), + MXS_PINCTRL_PIN(ENET0_RXD0), + MXS_PINCTRL_PIN(ENET0_RXD1), + MXS_PINCTRL_PIN(ENET0_TX_CLK), + MXS_PINCTRL_PIN(ENET0_TX_EN), + MXS_PINCTRL_PIN(ENET0_TXD0), + MXS_PINCTRL_PIN(ENET0_TXD1), + MXS_PINCTRL_PIN(ENET0_RXD2), + MXS_PINCTRL_PIN(ENET0_RXD3), + MXS_PINCTRL_PIN(ENET0_TXD2), + MXS_PINCTRL_PIN(ENET0_TXD3), + MXS_PINCTRL_PIN(ENET0_RX_CLK), + MXS_PINCTRL_PIN(ENET0_COL), + MXS_PINCTRL_PIN(ENET0_CRS), + MXS_PINCTRL_PIN(ENET_CLK), + MXS_PINCTRL_PIN(JTAG_RTCK), + MXS_PINCTRL_PIN(EMI_D00), + MXS_PINCTRL_PIN(EMI_D01), + MXS_PINCTRL_PIN(EMI_D02), + MXS_PINCTRL_PIN(EMI_D03), + MXS_PINCTRL_PIN(EMI_D04), + MXS_PINCTRL_PIN(EMI_D05), + MXS_PINCTRL_PIN(EMI_D06), + MXS_PINCTRL_PIN(EMI_D07), + MXS_PINCTRL_PIN(EMI_D08), + MXS_PINCTRL_PIN(EMI_D09), + MXS_PINCTRL_PIN(EMI_D10), + MXS_PINCTRL_PIN(EMI_D11), + MXS_PINCTRL_PIN(EMI_D12), + MXS_PINCTRL_PIN(EMI_D13), + MXS_PINCTRL_PIN(EMI_D14), + MXS_PINCTRL_PIN(EMI_D15), + MXS_PINCTRL_PIN(EMI_ODT0), + MXS_PINCTRL_PIN(EMI_DQM0), + MXS_PINCTRL_PIN(EMI_ODT1), + MXS_PINCTRL_PIN(EMI_DQM1), + MXS_PINCTRL_PIN(EMI_DDR_OPEN_FB), + MXS_PINCTRL_PIN(EMI_CLK), + MXS_PINCTRL_PIN(EMI_DQS0), + MXS_PINCTRL_PIN(EMI_DQS1), + MXS_PINCTRL_PIN(EMI_DDR_OPEN), + MXS_PINCTRL_PIN(EMI_A00), + MXS_PINCTRL_PIN(EMI_A01), + MXS_PINCTRL_PIN(EMI_A02), + MXS_PINCTRL_PIN(EMI_A03), + MXS_PINCTRL_PIN(EMI_A04), + MXS_PINCTRL_PIN(EMI_A05), + MXS_PINCTRL_PIN(EMI_A06), + MXS_PINCTRL_PIN(EMI_A07), + MXS_PINCTRL_PIN(EMI_A08), + MXS_PINCTRL_PIN(EMI_A09), + MXS_PINCTRL_PIN(EMI_A10), + MXS_PINCTRL_PIN(EMI_A11), + MXS_PINCTRL_PIN(EMI_A12), + MXS_PINCTRL_PIN(EMI_A13), + MXS_PINCTRL_PIN(EMI_A14), + MXS_PINCTRL_PIN(EMI_BA0), + MXS_PINCTRL_PIN(EMI_BA1), + MXS_PINCTRL_PIN(EMI_BA2), + MXS_PINCTRL_PIN(EMI_CASN), + MXS_PINCTRL_PIN(EMI_RASN), + MXS_PINCTRL_PIN(EMI_WEN), + MXS_PINCTRL_PIN(EMI_CE0N), + MXS_PINCTRL_PIN(EMI_CE1N), + MXS_PINCTRL_PIN(EMI_CKE), +}; + +static struct mxs_regs imx28_regs = { + .muxsel = 0x100, + .drive = 0x300, + .pull = 0x600, +}; + +static struct mxs_pinctrl_soc_data imx28_pinctrl_data = { + .regs = &imx28_regs, + .pins = imx28_pins, + .npins = ARRAY_SIZE(imx28_pins), +}; + +static int __devinit imx28_pinctrl_probe(struct platform_device *pdev) +{ + return mxs_pinctrl_probe(pdev, &imx28_pinctrl_data); +} + +static struct of_device_id imx28_pinctrl_of_match[] __devinitdata = { + { .compatible = "fsl,imx28-pinctrl", }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, imx28_pinctrl_of_match); + +static struct platform_driver imx28_pinctrl_driver = { + .driver = { + .name = "imx28-pinctrl", + .owner = THIS_MODULE, + .of_match_table = imx28_pinctrl_of_match, + }, + .probe = imx28_pinctrl_probe, + .remove = __devexit_p(mxs_pinctrl_remove), +}; + +static int __init imx28_pinctrl_init(void) +{ + return platform_driver_register(&imx28_pinctrl_driver); +} +arch_initcall(imx28_pinctrl_init); + +static void __exit imx28_pinctrl_exit(void) +{ + platform_driver_unregister(&imx28_pinctrl_driver); +} +module_exit(imx28_pinctrl_exit); + +MODULE_AUTHOR("Shawn Guo "); +MODULE_DESCRIPTION("Freescale i.MX28 pinctrl driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/pinctrl/pinctrl-mxs.c b/drivers/pinctrl/pinctrl-mxs.c new file mode 100644 index 000000000000..93cd959971c5 --- /dev/null +++ b/drivers/pinctrl/pinctrl-mxs.c @@ -0,0 +1,508 @@ +/* + * Copyright 2012 Freescale Semiconductor, Inc. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "core.h" +#include "pinctrl-mxs.h" + +#define SUFFIX_LEN 4 + +struct mxs_pinctrl_data { + struct device *dev; + struct pinctrl_dev *pctl; + void __iomem *base; + struct mxs_pinctrl_soc_data *soc; +}; + +static int mxs_get_groups_count(struct pinctrl_dev *pctldev) +{ + struct mxs_pinctrl_data *d = pinctrl_dev_get_drvdata(pctldev); + + return d->soc->ngroups; +} + +static const char *mxs_get_group_name(struct pinctrl_dev *pctldev, + unsigned group) +{ + struct mxs_pinctrl_data *d = pinctrl_dev_get_drvdata(pctldev); + + return d->soc->groups[group].name; +} + +static int mxs_get_group_pins(struct pinctrl_dev *pctldev, unsigned group, + const unsigned **pins, unsigned *num_pins) +{ + struct mxs_pinctrl_data *d = pinctrl_dev_get_drvdata(pctldev); + + *pins = d->soc->groups[group].pins; + *num_pins = d->soc->groups[group].npins; + + return 0; +} + +static void mxs_pin_dbg_show(struct pinctrl_dev *pctldev, struct seq_file *s, + unsigned offset) +{ + seq_printf(s, " %s", dev_name(pctldev->dev)); +} + +static int mxs_dt_node_to_map(struct pinctrl_dev *pctldev, + struct device_node *np, + struct pinctrl_map **map, unsigned *num_maps) +{ + struct pinctrl_map *new_map; + char *group; + unsigned new_num; + unsigned long config = 0; + unsigned long *pconfig; + int length = strlen(np->name) + SUFFIX_LEN; + u32 val; + int ret; + + ret = of_property_read_u32(np, "fsl,drive-strength", &val); + if (!ret) + config = val | MA_PRESENT; + ret = of_property_read_u32(np, "fsl,voltage", &val); + if (!ret) + config |= val << VOL_SHIFT | VOL_PRESENT; + ret = of_property_read_u32(np, "fsl,pull-up", &val); + if (!ret) + config |= val << PULL_SHIFT | PULL_PRESENT; + + new_num = config ? 2 : 1; + new_map = kzalloc(sizeof(*new_map) * new_num, GFP_KERNEL); + if (!new_map) + return -ENOMEM; + + new_map[0].type = PIN_MAP_TYPE_MUX_GROUP; + new_map[0].data.mux.function = np->name; + + /* Compose group name */ + group = kzalloc(length, GFP_KERNEL); + if (!group) + return -ENOMEM; + of_property_read_u32(np, "reg", &val); + snprintf(group, length, "%s.%d", np->name, val); + new_map[0].data.mux.group = group; + + if (config) { + pconfig = kmemdup(&config, sizeof(config), GFP_KERNEL); + if (!pconfig) { + ret = -ENOMEM; + goto free; + } + + new_map[1].type = PIN_MAP_TYPE_CONFIGS_GROUP; + new_map[1].data.configs.group_or_pin = group; + new_map[1].data.configs.configs = pconfig; + new_map[1].data.configs.num_configs = 1; + } + + *map = new_map; + *num_maps = new_num; + + return 0; + +free: + kfree(new_map); + return ret; +} + +static void mxs_dt_free_map(struct pinctrl_dev *pctldev, + struct pinctrl_map *map, unsigned num_maps) +{ + int i; + + for (i = 0; i < num_maps; i++) { + if (map[i].type == PIN_MAP_TYPE_MUX_GROUP) + kfree(map[i].data.mux.group); + if (map[i].type == PIN_MAP_TYPE_CONFIGS_GROUP) + kfree(map[i].data.configs.configs); + } + + kfree(map); +} + +static struct pinctrl_ops mxs_pinctrl_ops = { + .get_groups_count = mxs_get_groups_count, + .get_group_name = mxs_get_group_name, + .get_group_pins = mxs_get_group_pins, + .pin_dbg_show = mxs_pin_dbg_show, + .dt_node_to_map = mxs_dt_node_to_map, + .dt_free_map = mxs_dt_free_map, +}; + +static int mxs_pinctrl_get_funcs_count(struct pinctrl_dev *pctldev) +{ + struct mxs_pinctrl_data *d = pinctrl_dev_get_drvdata(pctldev); + + return d->soc->nfunctions; +} + +static const char *mxs_pinctrl_get_func_name(struct pinctrl_dev *pctldev, + unsigned function) +{ + struct mxs_pinctrl_data *d = pinctrl_dev_get_drvdata(pctldev); + + return d->soc->functions[function].name; +} + +static int mxs_pinctrl_get_func_groups(struct pinctrl_dev *pctldev, + unsigned group, + const char * const **groups, + unsigned * const num_groups) +{ + struct mxs_pinctrl_data *d = pinctrl_dev_get_drvdata(pctldev); + + *groups = d->soc->functions[group].groups; + *num_groups = d->soc->functions[group].ngroups; + + return 0; +} + +static int mxs_pinctrl_enable(struct pinctrl_dev *pctldev, unsigned selector, + unsigned group) +{ + struct mxs_pinctrl_data *d = pinctrl_dev_get_drvdata(pctldev); + struct mxs_group *g = &d->soc->groups[group]; + void __iomem *reg; + u8 bank, shift; + u16 pin; + int i; + + for (i = 0; i < g->npins; i++) { + bank = PINID_TO_BANK(g->pins[i]); + pin = PINID_TO_PIN(g->pins[i]); + reg = d->base + d->soc->regs->muxsel; + reg += bank * 0x20 + pin / 16 * 0x10; + shift = pin % 16 * 2; + + writel(0x3 << shift, reg + CLR); + writel(g->muxsel[i] << shift, reg + SET); + } + + return 0; +} + +static void mxs_pinctrl_disable(struct pinctrl_dev *pctldev, + unsigned function, unsigned group) +{ + /* Nothing to do here */ +} + +static struct pinmux_ops mxs_pinmux_ops = { + .get_functions_count = mxs_pinctrl_get_funcs_count, + .get_function_name = mxs_pinctrl_get_func_name, + .get_function_groups = mxs_pinctrl_get_func_groups, + .enable = mxs_pinctrl_enable, + .disable = mxs_pinctrl_disable, +}; + +static int mxs_pinconf_get(struct pinctrl_dev *pctldev, + unsigned pin, unsigned long *config) +{ + return -ENOTSUPP; +} + +static int mxs_pinconf_set(struct pinctrl_dev *pctldev, + unsigned pin, unsigned long config) +{ + return -ENOTSUPP; +} + +static int mxs_pinconf_group_get(struct pinctrl_dev *pctldev, + unsigned group, unsigned long *config) +{ + struct mxs_pinctrl_data *d = pinctrl_dev_get_drvdata(pctldev); + + *config = d->soc->groups[group].config; + + return 0; +} + +static int mxs_pinconf_group_set(struct pinctrl_dev *pctldev, + unsigned group, unsigned long config) +{ + struct mxs_pinctrl_data *d = pinctrl_dev_get_drvdata(pctldev); + struct mxs_group *g = &d->soc->groups[group]; + void __iomem *reg; + u8 ma, vol, pull, bank, shift; + u16 pin; + int i; + + ma = CONFIG_TO_MA(config); + vol = CONFIG_TO_VOL(config); + pull = CONFIG_TO_PULL(config); + + for (i = 0; i < g->npins; i++) { + bank = PINID_TO_BANK(g->pins[i]); + pin = PINID_TO_PIN(g->pins[i]); + + /* drive */ + reg = d->base + d->soc->regs->drive; + reg += bank * 0x40 + pin / 8 * 0x10; + + /* mA */ + if (config & MA_PRESENT) { + shift = pin % 8 * 4; + writel(0x3 << shift, reg + CLR); + writel(ma << shift, reg + SET); + } + + /* vol */ + if (config & VOL_PRESENT) { + shift = pin % 8 * 4 + 2; + if (vol) + writel(1 << shift, reg + SET); + else + writel(1 << shift, reg + CLR); + } + + /* pull */ + if (config & PULL_PRESENT) { + reg = d->base + d->soc->regs->pull; + reg += bank * 0x10; + shift = pin; + if (pull) + writel(1 << shift, reg + SET); + else + writel(1 << shift, reg + CLR); + } + } + + /* cache the config value for mxs_pinconf_group_get() */ + g->config = config; + + return 0; +} + +static void mxs_pinconf_dbg_show(struct pinctrl_dev *pctldev, + struct seq_file *s, unsigned pin) +{ + /* Not support */ +} + +static void mxs_pinconf_group_dbg_show(struct pinctrl_dev *pctldev, + struct seq_file *s, unsigned group) +{ + unsigned long config; + + if (!mxs_pinconf_group_get(pctldev, group, &config)) + seq_printf(s, "0x%lx", config); +} + +struct pinconf_ops mxs_pinconf_ops = { + .pin_config_get = mxs_pinconf_get, + .pin_config_set = mxs_pinconf_set, + .pin_config_group_get = mxs_pinconf_group_get, + .pin_config_group_set = mxs_pinconf_group_set, + .pin_config_dbg_show = mxs_pinconf_dbg_show, + .pin_config_group_dbg_show = mxs_pinconf_group_dbg_show, +}; + +static struct pinctrl_desc mxs_pinctrl_desc = { + .pctlops = &mxs_pinctrl_ops, + .pmxops = &mxs_pinmux_ops, + .confops = &mxs_pinconf_ops, + .owner = THIS_MODULE, +}; + +static int __devinit mxs_pinctrl_parse_group(struct platform_device *pdev, + struct device_node *np, int idx, + const char **out_name) +{ + struct mxs_pinctrl_data *d = platform_get_drvdata(pdev); + struct mxs_group *g = &d->soc->groups[idx]; + struct property *prop; + const char *propname = "fsl,pinmux-ids"; + char *group; + int length = strlen(np->name) + SUFFIX_LEN; + int i; + u32 val; + + group = devm_kzalloc(&pdev->dev, length, GFP_KERNEL); + if (!group) + return -ENOMEM; + of_property_read_u32(np, "reg", &val); + snprintf(group, length, "%s.%d", np->name, val); + g->name = group; + + prop = of_find_property(np, propname, &length); + if (!prop) + return -EINVAL; + g->npins = length / sizeof(u32); + + g->pins = devm_kzalloc(&pdev->dev, g->npins * sizeof(*g->pins), + GFP_KERNEL); + if (!g->pins) + return -ENOMEM; + + g->muxsel = devm_kzalloc(&pdev->dev, g->npins * sizeof(*g->muxsel), + GFP_KERNEL); + if (!g->muxsel) + return -ENOMEM; + + of_property_read_u32_array(np, propname, g->pins, g->npins); + for (i = 0; i < g->npins; i++) { + g->muxsel[i] = MUXID_TO_MUXSEL(g->pins[i]); + g->pins[i] = MUXID_TO_PINID(g->pins[i]); + } + + *out_name = g->name; + + return 0; +} + +static int __devinit mxs_pinctrl_probe_dt(struct platform_device *pdev, + struct mxs_pinctrl_data *d) +{ + struct mxs_pinctrl_soc_data *soc = d->soc; + struct device_node *np = pdev->dev.of_node; + struct device_node *child; + struct mxs_function *f; + const char *fn, *fnull = ""; + int i = 0, idxf = 0, idxg = 0; + int ret; + u32 val; + + child = of_get_next_child(np, NULL); + if (!child) { + dev_err(&pdev->dev, "no group is defined\n"); + return -ENOENT; + } + + /* Count total functions and groups */ + fn = fnull; + for_each_child_of_node(np, child) { + /* Skip pure pinconf node */ + if (of_property_read_u32(child, "reg", &val)) + continue; + if (strcmp(fn, child->name)) { + fn = child->name; + soc->nfunctions++; + } + soc->ngroups++; + } + + soc->functions = devm_kzalloc(&pdev->dev, soc->nfunctions * + sizeof(*soc->functions), GFP_KERNEL); + if (!soc->functions) + return -ENOMEM; + + soc->groups = devm_kzalloc(&pdev->dev, soc->ngroups * + sizeof(*soc->groups), GFP_KERNEL); + if (!soc->groups) + return -ENOMEM; + + /* Count groups for each function */ + fn = fnull; + f = &soc->functions[idxf]; + for_each_child_of_node(np, child) { + if (of_property_read_u32(child, "reg", &val)) + continue; + if (strcmp(fn, child->name)) { + f = &soc->functions[idxf++]; + f->name = fn = child->name; + } + f->ngroups++; + }; + + /* Get groups for each function */ + idxf = 0; + fn = fnull; + for_each_child_of_node(np, child) { + if (of_property_read_u32(child, "reg", &val)) + continue; + if (strcmp(fn, child->name)) { + f = &soc->functions[idxf++]; + f->groups = devm_kzalloc(&pdev->dev, f->ngroups * + sizeof(*f->groups), + GFP_KERNEL); + if (!f->groups) + return -ENOMEM; + fn = child->name; + i = 0; + } + ret = mxs_pinctrl_parse_group(pdev, child, idxg++, + &f->groups[i++]); + if (ret) + return ret; + } + + return 0; +} + +int __devinit mxs_pinctrl_probe(struct platform_device *pdev, + struct mxs_pinctrl_soc_data *soc) +{ + struct device_node *np = pdev->dev.of_node; + struct mxs_pinctrl_data *d; + int ret; + + d = devm_kzalloc(&pdev->dev, sizeof(*d), GFP_KERNEL); + if (!d) + return -ENOMEM; + + d->dev = &pdev->dev; + d->soc = soc; + + d->base = of_iomap(np, 0); + if (!d->base) + return -EADDRNOTAVAIL; + + mxs_pinctrl_desc.pins = d->soc->pins; + mxs_pinctrl_desc.npins = d->soc->npins; + mxs_pinctrl_desc.name = dev_name(&pdev->dev); + + platform_set_drvdata(pdev, d); + + ret = mxs_pinctrl_probe_dt(pdev, d); + if (ret) { + dev_err(&pdev->dev, "dt probe failed: %d\n", ret); + goto err; + } + + d->pctl = pinctrl_register(&mxs_pinctrl_desc, &pdev->dev, d); + if (!d->pctl) { + dev_err(&pdev->dev, "Couldn't register MXS pinctrl driver\n"); + ret = -EINVAL; + goto err; + } + + return 0; + +err: + iounmap(d->base); + return ret; +} +EXPORT_SYMBOL_GPL(mxs_pinctrl_probe); + +int __devexit mxs_pinctrl_remove(struct platform_device *pdev) +{ + struct mxs_pinctrl_data *d = platform_get_drvdata(pdev); + + pinctrl_unregister(d->pctl); + iounmap(d->base); + + return 0; +} +EXPORT_SYMBOL_GPL(mxs_pinctrl_remove); diff --git a/drivers/pinctrl/pinctrl-mxs.h b/drivers/pinctrl/pinctrl-mxs.h new file mode 100644 index 000000000000..fdd88d0bae22 --- /dev/null +++ b/drivers/pinctrl/pinctrl-mxs.h @@ -0,0 +1,91 @@ +/* + * Copyright 2012 Freescale Semiconductor, Inc. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#ifndef __PINCTRL_MXS_H +#define __PINCTRL_MXS_H + +#include +#include + +#define SET 0x4 +#define CLR 0x8 +#define TOG 0xc + +#define MXS_PINCTRL_PIN(pin) PINCTRL_PIN(pin, #pin) +#define PINID(bank, pin) ((bank) * 32 + (pin)) + +/* + * pinmux-id bit field definitions + * + * bank: 15..12 (4) + * pin: 11..4 (8) + * muxsel: 3..0 (4) + */ +#define MUXID_TO_PINID(m) PINID((m) >> 12 & 0xf, (m) >> 4 & 0xff) +#define MUXID_TO_MUXSEL(m) ((m) & 0xf) + +#define PINID_TO_BANK(p) ((p) >> 5) +#define PINID_TO_PIN(p) ((p) % 32) + +/* + * pin config bit field definitions + * + * pull-up: 6..5 (2) + * voltage: 4..3 (2) + * mA: 2..0 (3) + * + * MSB of each field is presence bit for the config. + */ +#define PULL_PRESENT (1 << 6) +#define PULL_SHIFT 5 +#define VOL_PRESENT (1 << 4) +#define VOL_SHIFT 3 +#define MA_PRESENT (1 << 2) +#define MA_SHIFT 0 +#define CONFIG_TO_PULL(c) ((c) >> PULL_SHIFT & 0x1) +#define CONFIG_TO_VOL(c) ((c) >> VOL_SHIFT & 0x1) +#define CONFIG_TO_MA(c) ((c) >> MA_SHIFT & 0x3) + +struct mxs_function { + const char *name; + const char **groups; + unsigned ngroups; +}; + +struct mxs_group { + const char *name; + unsigned int *pins; + unsigned npins; + u8 *muxsel; + u8 config; +}; + +struct mxs_regs { + u16 muxsel; + u16 drive; + u16 pull; +}; + +struct mxs_pinctrl_soc_data { + const struct mxs_regs *regs; + const struct pinctrl_pin_desc *pins; + unsigned npins; + struct mxs_function *functions; + unsigned nfunctions; + struct mxs_group *groups; + unsigned ngroups; +}; + +int mxs_pinctrl_probe(struct platform_device *pdev, + struct mxs_pinctrl_soc_data *soc); +int mxs_pinctrl_remove(struct platform_device *pdev); + +#endif /* __PINCTRL_MXS_H */ -- cgit v1.2.3 From e447c50e3af5dcad3075c80bd1bdc4e2024b8186 Mon Sep 17 00:00:00 2001 From: Rajendra Nayak Date: Fri, 27 Apr 2012 17:58:13 +0530 Subject: clk: constify parent name arrays in macros parent name array is now expected to be const char *, make the relevent changes in the clk macros which define default clock types. Signed-off-by: Rajendra Nayak Signed-off-by: Mike Turquette --- include/linux/clk-private.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/include/linux/clk-private.h b/include/linux/clk-private.h index eeae7a3cfc45..6ebec83f1a77 100644 --- a/include/linux/clk-private.h +++ b/include/linux/clk-private.h @@ -70,7 +70,7 @@ struct clk { #define DEFINE_CLK_FIXED_RATE(_name, _flags, _rate, \ _fixed_rate_flags) \ static struct clk _name; \ - static char *_name##_parent_names[] = {}; \ + static const char *_name##_parent_names[] = {}; \ static struct clk_fixed_rate _name##_hw = { \ .hw = { \ .clk = &_name, \ @@ -85,7 +85,7 @@ struct clk { _flags, _reg, _bit_idx, \ _gate_flags, _lock) \ static struct clk _name; \ - static char *_name##_parent_names[] = { \ + static const char *_name##_parent_names[] = { \ _parent_name, \ }; \ static struct clk *_name##_parents[] = { \ @@ -107,7 +107,7 @@ struct clk { _flags, _reg, _shift, _width, \ _divider_flags, _lock) \ static struct clk _name; \ - static char *_name##_parent_names[] = { \ + static const char *_name##_parent_names[] = { \ _parent_name, \ }; \ static struct clk *_name##_parents[] = { \ -- cgit v1.2.3 From 0197b3ea0f66cd2a11417f58fe1812858ea77908 Mon Sep 17 00:00:00 2001 From: Saravana Kannan Date: Wed, 25 Apr 2012 22:58:56 -0700 Subject: clk: Use a separate struct for holding init data. Create a struct clk_init_data to hold all data that needs to be passed from the platfrom specific driver to the common clock framework during clock registration. Add a pointer to this struct inside clk_hw. This has several advantages: * Completely hides struct clk from many clock platform drivers and static clock initialization code that don't care for static initialization of the struct clks. * For platforms that want to do complete static initialization, it removed the need to directly mess with the struct clk's fields while still allowing to statically allocate struct clk. This keeps the code more future proof even if they include clk-private.h. * Simplifies the generic clk_register() function and allows adding optional fields in the future without modifying the function signature. * Simplifies the static initialization of clocks on all platforms by removing the need for forward delcarations or convoluted macros. Signed-off-by: Saravana Kannan [mturquette@linaro.org: kept DEFINE_CLK_* macros and __clk_init] Signed-off-by: Mike Turquette Cc: Andrew Lunn Cc: Rob Herring Cc: Russell King Cc: Jeremy Kerr Cc: Thomas Gleixner Cc: Arnd Bergman Cc: Paul Walmsley Cc: Shawn Guo Cc: Sascha Hauer Cc: Jamie Iles Cc: Richard Zhao Cc: Saravana Kannan Cc: Magnus Damm Cc: Mark Brown Cc: Linus Walleij Cc: Stephen Boyd Cc: Amit Kucheria Cc: Deepak Saxena Cc: Grant Likely --- drivers/clk/clk-divider.c | 14 ++++--- drivers/clk/clk-fixed-rate.c | 14 ++++--- drivers/clk/clk-gate.c | 15 +++++--- drivers/clk/clk-mux.c | 10 ++++- drivers/clk/clk.c | 89 +++++++++++++++++++++++++++----------------- include/linux/clk-private.h | 2 + include/linux/clk-provider.h | 59 ++++++++++++++++++----------- 7 files changed, 129 insertions(+), 74 deletions(-) diff --git a/drivers/clk/clk-divider.c b/drivers/clk/clk-divider.c index 90627e4069af..8ea11b444528 100644 --- a/drivers/clk/clk-divider.c +++ b/drivers/clk/clk-divider.c @@ -167,6 +167,7 @@ struct clk *clk_register_divider(struct device *dev, const char *name, { struct clk_divider *div; struct clk *clk; + struct clk_init_data init; /* allocate the divider */ div = kzalloc(sizeof(struct clk_divider), GFP_KERNEL); @@ -175,19 +176,22 @@ struct clk *clk_register_divider(struct device *dev, const char *name, return ERR_PTR(-ENOMEM); } + init.name = name; + init.ops = &clk_divider_ops; + init.flags = flags; + init.parent_names = (parent_name ? &parent_name: NULL); + init.num_parents = (parent_name ? 1 : 0); + /* struct clk_divider assignments */ div->reg = reg; div->shift = shift; div->width = width; div->flags = clk_divider_flags; div->lock = lock; + div->hw.init = &init; /* register the clock */ - clk = clk_register(dev, name, - &clk_divider_ops, &div->hw, - (parent_name ? &parent_name: NULL), - (parent_name ? 1 : 0), - flags); + clk = clk_register(dev, &div->hw); if (IS_ERR(clk)) kfree(div); diff --git a/drivers/clk/clk-fixed-rate.c b/drivers/clk/clk-fixed-rate.c index b555a04c8df8..cbd246229786 100644 --- a/drivers/clk/clk-fixed-rate.c +++ b/drivers/clk/clk-fixed-rate.c @@ -52,6 +52,7 @@ struct clk *clk_register_fixed_rate(struct device *dev, const char *name, { struct clk_fixed_rate *fixed; struct clk *clk; + struct clk_init_data init; /* allocate fixed-rate clock */ fixed = kzalloc(sizeof(struct clk_fixed_rate), GFP_KERNEL); @@ -60,15 +61,18 @@ struct clk *clk_register_fixed_rate(struct device *dev, const char *name, return ERR_PTR(-ENOMEM); } + init.name = name; + init.ops = &clk_fixed_rate_ops; + init.flags = flags; + init.parent_names = (parent_name ? &parent_name: NULL); + init.num_parents = (parent_name ? 1 : 0); + /* struct clk_fixed_rate assignments */ fixed->fixed_rate = fixed_rate; + fixed->hw.init = &init; /* register the clock */ - clk = clk_register(dev, name, - &clk_fixed_rate_ops, &fixed->hw, - (parent_name ? &parent_name : NULL), - (parent_name ? 1 : 0), - flags); + clk = clk_register(dev, &fixed->hw); if (IS_ERR(clk)) kfree(fixed); diff --git a/drivers/clk/clk-gate.c b/drivers/clk/clk-gate.c index 00216164fb9d..578465e04be6 100644 --- a/drivers/clk/clk-gate.c +++ b/drivers/clk/clk-gate.c @@ -119,6 +119,7 @@ struct clk *clk_register_gate(struct device *dev, const char *name, { struct clk_gate *gate; struct clk *clk; + struct clk_init_data init; /* allocate the gate */ gate = kzalloc(sizeof(struct clk_gate), GFP_KERNEL); @@ -127,18 +128,20 @@ struct clk *clk_register_gate(struct device *dev, const char *name, return ERR_PTR(-ENOMEM); } + init.name = name; + init.ops = &clk_gate_ops; + init.flags = flags; + init.parent_names = (parent_name ? &parent_name: NULL); + init.num_parents = (parent_name ? 1 : 0); + /* struct clk_gate assignments */ gate->reg = reg; gate->bit_idx = bit_idx; gate->flags = clk_gate_flags; gate->lock = lock; + gate->hw.init = &init; - /* register the clock */ - clk = clk_register(dev, name, - &clk_gate_ops, &gate->hw, - (parent_name ? &parent_name : NULL), - (parent_name ? 1 : 0), - flags); + clk = clk_register(dev, &gate->hw); if (IS_ERR(clk)) kfree(gate); diff --git a/drivers/clk/clk-mux.c b/drivers/clk/clk-mux.c index 6e58f11ab81f..8e97491902e7 100644 --- a/drivers/clk/clk-mux.c +++ b/drivers/clk/clk-mux.c @@ -95,6 +95,7 @@ struct clk *clk_register_mux(struct device *dev, const char *name, { struct clk_mux *mux; struct clk *clk; + struct clk_init_data init; /* allocate the mux */ mux = kzalloc(sizeof(struct clk_mux), GFP_KERNEL); @@ -103,6 +104,12 @@ struct clk *clk_register_mux(struct device *dev, const char *name, return ERR_PTR(-ENOMEM); } + init.name = name; + init.ops = &clk_mux_ops; + init.flags = flags; + init.parent_names = parent_names; + init.num_parents = num_parents; + /* struct clk_mux assignments */ mux->reg = reg; mux->shift = shift; @@ -110,8 +117,7 @@ struct clk *clk_register_mux(struct device *dev, const char *name, mux->flags = clk_mux_flags; mux->lock = lock; - clk = clk_register(dev, name, &clk_mux_ops, &mux->hw, - parent_names, num_parents, flags); + clk = clk_register(dev, &mux->hw); if (IS_ERR(clk)) kfree(mux); diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c index 2dd20c01134d..c81803b9ba35 100644 --- a/drivers/clk/clk.c +++ b/drivers/clk/clk.c @@ -1169,26 +1169,6 @@ EXPORT_SYMBOL_GPL(clk_set_parent); * * Initializes the lists in struct clk, queries the hardware for the * parent and rate and sets them both. - * - * Any struct clk passed into __clk_init must have the following members - * populated: - * .name - * .ops - * .hw - * .parent_names - * .num_parents - * .flags - * - * Essentially, everything that would normally be passed into clk_register is - * assumed to be initialized already in __clk_init. The other members may be - * populated, but are optional. - * - * __clk_init is only exposed via clk-private.h and is intended for use with - * very large numbers of clocks that need to be statically initialized. It is - * a layering violation to include clk-private.h from any code which implements - * a clock's .ops; as such any statically initialized clock data MUST be in a - * separate C file from the logic that implements it's operations. Returns 0 - * on success, otherwise an error code. */ int __clk_init(struct device *dev, struct clk *clk) { @@ -1320,15 +1300,48 @@ out: return ret; } +/** + * __clk_register - register a clock and return a cookie. + * + * Same as clk_register, except that the .clk field inside hw shall point to a + * preallocated (generally statically allocated) struct clk. None of the fields + * of the struct clk need to be initialized. + * + * The data pointed to by .init and .clk field shall NOT be marked as init + * data. + * + * __clk_register is only exposed via clk-private.h and is intended for use with + * very large numbers of clocks that need to be statically initialized. It is + * a layering violation to include clk-private.h from any code which implements + * a clock's .ops; as such any statically initialized clock data MUST be in a + * separate C file from the logic that implements it's operations. Returns 0 + * on success, otherwise an error code. + */ +struct clk *__clk_register(struct device *dev, struct clk_hw *hw) +{ + int ret; + struct clk *clk; + + clk = hw->clk; + clk->name = hw->init->name; + clk->ops = hw->init->ops; + clk->hw = hw; + clk->flags = hw->init->flags; + clk->parent_names = hw->init->parent_names; + clk->num_parents = hw->init->num_parents; + + ret = __clk_init(dev, clk); + if (ret) + return ERR_PTR(ret); + + return clk; +} +EXPORT_SYMBOL_GPL(__clk_register); + /** * clk_register - allocate a new clock, register it and return an opaque cookie * @dev: device that is registering this clock - * @name: clock name - * @ops: operations this clock supports * @hw: link to hardware-specific clock data - * @parent_names: array of string names for all possible parents - * @num_parents: number of possible parents - * @flags: framework-level hints and quirks * * clk_register is the primary interface for populating the clock tree with new * clock nodes. It returns a pointer to the newly allocated struct clk which @@ -1336,9 +1349,7 @@ out: * rest of the clock API. In the event of an error clk_register will return an * error code; drivers must test for an error code after calling clk_register. */ -struct clk *clk_register(struct device *dev, const char *name, - const struct clk_ops *ops, struct clk_hw *hw, - const char **parent_names, u8 num_parents, unsigned long flags) +struct clk *clk_register(struct device *dev, struct clk_hw *hw) { int i, ret; struct clk *clk; @@ -1350,15 +1361,20 @@ struct clk *clk_register(struct device *dev, const char *name, goto fail_out; } - clk->name = name; - clk->ops = ops; + clk->name = kstrdup(hw->init->name, GFP_KERNEL); + if (!clk->name) { + pr_err("%s: could not allocate clk->name\n", __func__); + ret = -ENOMEM; + goto fail_name; + } + clk->ops = hw->init->ops; clk->hw = hw; - clk->flags = flags; - clk->num_parents = num_parents; + clk->flags = hw->init->flags; + clk->num_parents = hw->init->num_parents; hw->clk = clk; /* allocate local copy in case parent_names is __initdata */ - clk->parent_names = kzalloc((sizeof(char*) * num_parents), + clk->parent_names = kzalloc((sizeof(char*) * clk->num_parents), GFP_KERNEL); if (!clk->parent_names) { @@ -1369,8 +1385,9 @@ struct clk *clk_register(struct device *dev, const char *name, /* copy each string name in case parent_names is __initdata */ - for (i = 0; i < num_parents; i++) { - clk->parent_names[i] = kstrdup(parent_names[i], GFP_KERNEL); + for (i = 0; i < clk->num_parents; i++) { + clk->parent_names[i] = kstrdup(hw->init->parent_names[i], + GFP_KERNEL); if (!clk->parent_names[i]) { pr_err("%s: could not copy parent_names\n", __func__); ret = -ENOMEM; @@ -1387,6 +1404,8 @@ fail_parent_names_copy: kfree(clk->parent_names[i]); kfree(clk->parent_names); fail_parent_names: + kfree(clk->name); +fail_name: kfree(clk); fail_out: return ERR_PTR(ret); diff --git a/include/linux/clk-private.h b/include/linux/clk-private.h index 6ebec83f1a77..b258532162b8 100644 --- a/include/linux/clk-private.h +++ b/include/linux/clk-private.h @@ -167,5 +167,7 @@ struct clk { */ int __clk_init(struct device *dev, struct clk *clk); +struct clk *__clk_register(struct device *dev, struct clk_hw *hw); + #endif /* CONFIG_COMMON_CLK */ #endif /* CLK_PRIVATE_H */ diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h index 8f2148942b87..5db3412106b3 100644 --- a/include/linux/clk-provider.h +++ b/include/linux/clk-provider.h @@ -15,19 +15,6 @@ #ifdef CONFIG_COMMON_CLK -/** - * struct clk_hw - handle for traversing from a struct clk to its corresponding - * hardware-specific structure. struct clk_hw should be declared within struct - * clk_foo and then referenced by the struct clk instance that uses struct - * clk_foo's clk_ops - * - * clk: pointer to the struct clk instance that points back to this struct - * clk_hw instance - */ -struct clk_hw { - struct clk *clk; -}; - /* * flags used across common struct clk. these flags should only affect the * top-level framework. custom flags for dealing with hardware specifics @@ -39,6 +26,8 @@ struct clk_hw { #define CLK_IGNORE_UNUSED BIT(3) /* do not gate even if unused */ #define CLK_IS_ROOT BIT(4) /* root clk, has no parent */ +struct clk_hw; + /** * struct clk_ops - Callback operations for hardware clocks; these are to * be provided by the clock implementation, and will be called by drivers @@ -122,6 +111,41 @@ struct clk_ops { void (*init)(struct clk_hw *hw); }; +/** + * struct clk_init_data - holds init data that's common to all clocks and is + * shared between the clock provider and the common clock framework. + * + * @name: clock name + * @ops: operations this clock supports + * @parent_names: array of string names for all possible parents + * @num_parents: number of possible parents + * @flags: framework-level hints and quirks + */ +struct clk_init_data { + const char *name; + const struct clk_ops *ops; + const char **parent_names; + u8 num_parents; + unsigned long flags; +}; + +/** + * struct clk_hw - handle for traversing from a struct clk to its corresponding + * hardware-specific structure. struct clk_hw should be declared within struct + * clk_foo and then referenced by the struct clk instance that uses struct + * clk_foo's clk_ops + * + * @clk: pointer to the struct clk instance that points back to this struct + * clk_hw instance + * + * @init: pointer to struct clk_init_data that contains the init data shared + * with the common clock framework. + */ +struct clk_hw { + struct clk *clk; + struct clk_init_data *init; +}; + /* * DOC: Basic clock implementations common to many platforms * @@ -255,12 +279,7 @@ struct clk *clk_register_mux(struct device *dev, const char *name, /** * clk_register - allocate a new clock, register it and return an opaque cookie * @dev: device that is registering this clock - * @name: clock name - * @ops: operations this clock supports * @hw: link to hardware-specific clock data - * @parent_names: array of string names for all possible parents - * @num_parents: number of possible parents - * @flags: framework-level hints and quirks * * clk_register is the primary interface for populating the clock tree with new * clock nodes. It returns a pointer to the newly allocated struct clk which @@ -268,9 +287,7 @@ struct clk *clk_register_mux(struct device *dev, const char *name, * rest of the clock API. In the event of an error clk_register will return an * error code; drivers must test for an error code after calling clk_register. */ -struct clk *clk_register(struct device *dev, const char *name, - const struct clk_ops *ops, struct clk_hw *hw, - const char **parent_names, u8 num_parents, unsigned long flags); +struct clk *clk_register(struct device *dev, struct clk_hw *hw); /* helper functions */ const char *__clk_get_name(struct clk *clk); -- cgit v1.2.3 From 0e1c03017549a9df513622b3f15ff38eb8d35a62 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Wed, 11 Apr 2012 16:03:42 +0530 Subject: clk: clk_set_rate() must fail if CLK_SET_RATE_GATE is set and clk is enabled This is well documented but isn't implemented. clk_set_rate() must check if flags have CLK_SET_RATE_GATE bit set and is enabled too. Signed-off-by: Viresh Kumar Signed-off-by: Mike Turquette --- drivers/clk/clk.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c index c81803b9ba35..8149764f8438 100644 --- a/drivers/clk/clk.c +++ b/drivers/clk/clk.c @@ -900,6 +900,11 @@ int clk_set_rate(struct clk *clk, unsigned long rate) if (rate == clk->rate) goto out; + if ((clk->flags & CLK_SET_RATE_GATE) && __clk_is_enabled(clk)) { + ret = -EBUSY; + goto out; + } + /* calculate new rates and get the topmost changed clock */ top = clk_calc_new_rates(clk, rate); if (!top) { -- cgit v1.2.3 From e9d7f4065408e92338a41b809e437c6e043da090 Mon Sep 17 00:00:00 2001 From: Russell King Date: Wed, 2 May 2012 09:30:32 +0100 Subject: CLKDEV: provide helpers for common clock framework The common clock framework allocates clocks dynamically. Provide a set of helpers to streamline the clkdev registration of the clock lookups to avoid repetitive code sequences. Reviewed-by: Viresh Kumar Tested-by: Shawn Guo Signed-off-by: Russell King --- drivers/clk/clkdev.c | 84 ++++++++++++++++++++++++++++++++++++++++++++++---- include/linux/clkdev.h | 3 ++ 2 files changed, 81 insertions(+), 6 deletions(-) diff --git a/drivers/clk/clkdev.c b/drivers/clk/clkdev.c index d4a59931e75e..c535cf8c5770 100644 --- a/drivers/clk/clkdev.c +++ b/drivers/clk/clkdev.c @@ -166,8 +166,9 @@ struct clk_lookup_alloc { char con_id[MAX_CON_ID]; }; -struct clk_lookup * __init_refok -clkdev_alloc(struct clk *clk, const char *con_id, const char *dev_fmt, ...) +static struct clk_lookup * __init_refok +vclkdev_alloc(struct clk *clk, const char *con_id, const char *dev_fmt, + va_list ap) { struct clk_lookup_alloc *cla; @@ -182,16 +183,25 @@ clkdev_alloc(struct clk *clk, const char *con_id, const char *dev_fmt, ...) } if (dev_fmt) { - va_list ap; - - va_start(ap, dev_fmt); vscnprintf(cla->dev_id, sizeof(cla->dev_id), dev_fmt, ap); cla->cl.dev_id = cla->dev_id; - va_end(ap); } return &cla->cl; } + +struct clk_lookup * __init_refok +clkdev_alloc(struct clk *clk, const char *con_id, const char *dev_fmt, ...) +{ + struct clk_lookup *cl; + va_list ap; + + va_start(ap, dev_fmt); + cl = vclkdev_alloc(clk, con_id, dev_fmt, ap); + va_end(ap); + + return cl; +} EXPORT_SYMBOL(clkdev_alloc); int clk_add_alias(const char *alias, const char *alias_dev_name, char *id, @@ -223,3 +233,65 @@ void clkdev_drop(struct clk_lookup *cl) kfree(cl); } EXPORT_SYMBOL(clkdev_drop); + +/** + * clk_register_clkdev - register one clock lookup for a struct clk + * @clk: struct clk to associate with all clk_lookups + * @con_id: connection ID string on device + * @dev_id: format string describing device name + * + * con_id or dev_id may be NULL as a wildcard, just as in the rest of + * clkdev. + * + * To make things easier for mass registration, we detect error clks + * from a previous clk_register() call, and return the error code for + * those. This is to permit this function to be called immediately + * after clk_register(). + */ +int clk_register_clkdev(struct clk *clk, const char *con_id, + const char *dev_fmt, ...) +{ + struct clk_lookup *cl; + va_list ap; + + if (IS_ERR(clk)) + return PTR_ERR(clk); + + va_start(ap, dev_fmt); + cl = vclkdev_alloc(clk, con_id, dev_fmt, ap); + va_end(ap); + + if (!cl) + return -ENOMEM; + + clkdev_add(cl); + + return 0; +} + +/** + * clk_register_clkdevs - register a set of clk_lookup for a struct clk + * @clk: struct clk to associate with all clk_lookups + * @cl: array of clk_lookup structures with con_id and dev_id pre-initialized + * @num: number of clk_lookup structures to register + * + * To make things easier for mass registration, we detect error clks + * from a previous clk_register() call, and return the error code for + * those. This is to permit this function to be called immediately + * after clk_register(). + */ +int clk_register_clkdevs(struct clk *clk, struct clk_lookup *cl, size_t num) +{ + unsigned i; + + if (IS_ERR(clk)) + return PTR_ERR(clk); + + for (i = 0; i < num; i++, cl++) { + cl->clk = clk; + clkdev_add(cl); + } + + return 0; +} +EXPORT_SYMBOL(clk_register_clkdevs); diff --git a/include/linux/clkdev.h b/include/linux/clkdev.h index d9a4fd028c9d..a6a6f603103b 100644 --- a/include/linux/clkdev.h +++ b/include/linux/clkdev.h @@ -40,4 +40,7 @@ void clkdev_drop(struct clk_lookup *cl); void clkdev_add_table(struct clk_lookup *, size_t); int clk_add_alias(const char *, const char *, char *, struct device *); +int clk_register_clkdev(struct clk *, const char *, const char *, ...); +int clk_register_clkdevs(struct clk *, struct clk_lookup *, size_t); + #endif -- cgit v1.2.3 From 7704addb60e274d4e98c69a02f7ebe3f77c6c3a4 Mon Sep 17 00:00:00 2001 From: Mike Turquette Date: Wed, 2 May 2012 18:37:45 -0700 Subject: MAINTAINERS: add entry for common clk framework Signed-off-by: Mike Turquette --- MAINTAINERS | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index 1a2f8f5823e0..164e9a1df0f6 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1882,6 +1882,16 @@ F: Documentation/filesystems/coda.txt F: fs/coda/ F: include/linux/coda*.h +COMMON CLK FRAMEWORK +M: Mike Turquette +M: Mike Turquette +L: linux-arm-kernel@lists.infradead.org (same as CLK API & CLKDEV) +T: git git://git.linaro.org/people/mturquette/linux.git +S: Maintained +F: drivers/clk/clk.c +F: drivers/clk/clk-* +F: include/linux/clk-pr* + COMMON INTERNET FILE SYSTEM (CIFS) M: Steve French L: linux-cifs@vger.kernel.org -- cgit v1.2.3 From d4705316c18d371eb404d0ae5dcf51ce6e341d0f Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Tue, 1 May 2012 11:14:15 -0600 Subject: pinctrl: add more info to error msgs in pin_request Additionally print which pin the request failed for, which entity already claimed it, and what entity was trying to claim it. Remove duplicate device name from a debug message. Clean up some indentation. Signed-off-by: Stephen Warren Signed-off-by: Linus Walleij --- drivers/pinctrl/pinmux.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) diff --git a/drivers/pinctrl/pinmux.c b/drivers/pinctrl/pinmux.c index 2df753508eca..220fa492c9f0 100644 --- a/drivers/pinctrl/pinmux.c +++ b/drivers/pinctrl/pinmux.c @@ -92,7 +92,8 @@ static int pin_request(struct pinctrl_dev *pctldev, desc = pin_desc_get(pctldev, pin); if (desc == NULL) { dev_err(pctldev->dev, - "pin is not registered so it cannot be requested\n"); + "pin %d is not registered so it cannot be requested\n", + pin); goto out; } @@ -103,7 +104,8 @@ static int pin_request(struct pinctrl_dev *pctldev, /* There's no need to support multiple GPIO requests */ if (desc->gpio_owner) { dev_err(pctldev->dev, - "pin already requested\n"); + "pin %s already requested by %s; cannot claim for %s\n", + desc->name, desc->gpio_owner, owner); goto out; } @@ -111,7 +113,8 @@ static int pin_request(struct pinctrl_dev *pctldev, } else { if (desc->mux_usecount && strcmp(desc->mux_owner, owner)) { dev_err(pctldev->dev, - "pin already requested\n"); + "pin %s already requested by %s; cannot claim for %s\n", + desc->name, desc->mux_owner, owner); goto out; } @@ -144,8 +147,7 @@ static int pin_request(struct pinctrl_dev *pctldev, status = 0; if (status) { - dev_err(pctldev->dev, "request on device %s failed for pin %d\n", - pctldev->desc->name, pin); + dev_err(pctldev->dev, "request() failed for pin %d\n", pin); module_put(pctldev->owner); } @@ -162,7 +164,7 @@ out_free_pin: out: if (status) dev_err(pctldev->dev, "pin-%d (%s) status %d\n", - pin, owner, status); + pin, owner, status); return status; } -- cgit v1.2.3 From 63f5c3b2b18dcaca0fc8983b52a3f5d4d70a0590 Mon Sep 17 00:00:00 2001 From: Mike Turquette Date: Wed, 2 May 2012 16:23:43 -0700 Subject: clk: prevent spurious parent rate propagation Patch 'clk: always pass parent_rate into .round_rate' made a subtle change to the semantics of .round_rate. It is now expected for the parent's rate to always be passed in, simplifying the implemenation of various .round_rate callback definitions. However the patch also introduced a bug in clk_calc_new_rates whereby a clock without the CLK_SET_RATE_PARENT flag set could still propagate a rate change up to a parent clock if the the .round_rate callback modified the &best_parent_rate value in any way. This patch fixes the issue at the framework level (in clk_calc_new_rates) by specifically handling the case where the CLK_SET_RATE_PARENT flag is not set. Signed-off-by: Mike Turquette Acked-by: Sascha Hauer --- drivers/clk/clk.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c index 8149764f8438..7ceca0e8645a 100644 --- a/drivers/clk/clk.c +++ b/drivers/clk/clk.c @@ -774,12 +774,18 @@ static struct clk *clk_calc_new_rates(struct clk *clk, unsigned long rate) if (IS_ERR_OR_NULL(clk)) return NULL; + /* save parent rate, if it exists */ + if (clk->parent) + best_parent_rate = clk->parent->rate; + /* never propagate up to the parent */ if (!(clk->flags & CLK_SET_RATE_PARENT)) { if (!clk->ops->round_rate) { clk->new_rate = clk->rate; return NULL; } + new_rate = clk->ops->round_rate(clk->hw, rate, &best_parent_rate); + goto out; } /* need clk->parent from here on out */ @@ -795,7 +801,6 @@ static struct clk *clk_calc_new_rates(struct clk *clk, unsigned long rate) goto out; } - best_parent_rate = clk->parent->rate; new_rate = clk->ops->round_rate(clk->hw, rate, &best_parent_rate); if (best_parent_rate != clk->parent->rate) { -- cgit v1.2.3 From d269b974e32c5dcf043acd07f9ad96e715019ffd Mon Sep 17 00:00:00 2001 From: Mike Turquette Date: Wed, 2 May 2012 15:45:32 -0700 Subject: clk: remove COMMON_CLK_DISABLE_UNUSED Exposing this option generates confusion and incorrect behavior for single-image builds across platforms. Enable this behavior permanently. Signed-off-by: Mike Turquette Acked-by: Saravana Kannan --- drivers/clk/Kconfig | 11 ----------- drivers/clk/clk.c | 2 -- 2 files changed, 13 deletions(-) diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig index f05a60dc1a03..4864407e3fc4 100644 --- a/drivers/clk/Kconfig +++ b/drivers/clk/Kconfig @@ -23,17 +23,6 @@ config COMMON_CLK menu "Common Clock Framework" depends on COMMON_CLK -config COMMON_CLK_DISABLE_UNUSED - bool "Disabled unused clocks at boot" - depends on COMMON_CLK - ---help--- - Traverses the entire clock tree and disables any clocks that are - enabled in hardware but have not been enabled by any device drivers. - This saves power and keeps the software model of the clock in line - with reality. - - If in doubt, say "N". - config COMMON_CLK_DEBUG bool "DebugFS representation of clock tree" depends on COMMON_CLK diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c index 7ceca0e8645a..e5d5dc13bcfd 100644 --- a/drivers/clk/clk.c +++ b/drivers/clk/clk.c @@ -196,7 +196,6 @@ late_initcall(clk_debug_init); static inline int clk_debug_register(struct clk *clk) { return 0; } #endif -#ifdef CONFIG_COMMON_CLK_DISABLE_UNUSED /* caller must hold prepare_lock */ static void clk_disable_unused_subtree(struct clk *clk) { @@ -246,7 +245,6 @@ static int clk_disable_unused(void) return 0; } late_initcall(clk_disable_unused); -#endif /*** helper functions ***/ -- cgit v1.2.3 From 31df9db99549cd29bbe5e32da4492970e6f97191 Mon Sep 17 00:00:00 2001 From: Mike Turquette Date: Sun, 6 May 2012 18:48:11 -0700 Subject: clk: mux: assign init data The original conversion to struct clk_hw_init failed to add the pointer assignment in clk_register_mux. Signed-off-by: Mike Turquette Reported-by: Sascha Hauer --- drivers/clk/clk-mux.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/clk/clk-mux.c b/drivers/clk/clk-mux.c index 8e97491902e7..fd36a8ea73d9 100644 --- a/drivers/clk/clk-mux.c +++ b/drivers/clk/clk-mux.c @@ -116,6 +116,7 @@ struct clk *clk_register_mux(struct device *dev, const char *name, mux->width = width; mux->flags = clk_mux_flags; mux->lock = lock; + mux->hw.init = &init; clk = clk_register(dev, &mux->hw); -- cgit v1.2.3 From f0948f59dbc8e725a96ba16da666e8f5cdd43ba8 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Thu, 3 May 2012 15:36:14 +0530 Subject: clk: add a fixed factor clock Having fixed factors/dividers in hardware is a common pattern, so add a basic clock type doing this. It basically describes a fixed factor clock using a nominator and a denominator. Signed-off-by: Sascha Hauer Reviewed-by: Viresh Kumar Tested-by: Shawn Guo [mturquette@linaro.org: constify parent_names in static init macro] [mturquette@linaro.org: copy/paste bug from mux in static init macro] [mturquette@linaro.org: fix error handling in clk_register_fixed_factor] [mturquette@linaro.org: improve division accuracy; thanks to Saravana] Signed-off-by: Mike Turquette --- drivers/clk/Makefile | 2 +- drivers/clk/clk-fixed-factor.c | 95 ++++++++++++++++++++++++++++++++++++++++++ include/linux/clk-private.h | 20 +++++++++ include/linux/clk-provider.h | 23 ++++++++++ 4 files changed, 139 insertions(+), 1 deletion(-) create mode 100644 drivers/clk/clk-fixed-factor.c diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile index 1f736bc11c4b..24aa7144811b 100644 --- a/drivers/clk/Makefile +++ b/drivers/clk/Makefile @@ -1,4 +1,4 @@ obj-$(CONFIG_CLKDEV_LOOKUP) += clkdev.o obj-$(CONFIG_COMMON_CLK) += clk.o clk-fixed-rate.o clk-gate.o \ - clk-mux.o clk-divider.o + clk-mux.o clk-divider.o clk-fixed-factor.o diff --git a/drivers/clk/clk-fixed-factor.c b/drivers/clk/clk-fixed-factor.c new file mode 100644 index 000000000000..c8c003e217ad --- /dev/null +++ b/drivers/clk/clk-fixed-factor.c @@ -0,0 +1,95 @@ +/* + * Copyright (C) 2011 Sascha Hauer, Pengutronix + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Standard functionality for the common clock API. + */ +#include +#include +#include +#include + +/* + * DOC: basic fixed multiplier and divider clock that cannot gate + * + * Traits of this clock: + * prepare - clk_prepare only ensures that parents are prepared + * enable - clk_enable only ensures that parents are enabled + * rate - rate is fixed. clk->rate = parent->rate / div * mult + * parent - fixed parent. No clk_set_parent support + */ + +#define to_clk_fixed_factor(_hw) container_of(_hw, struct clk_fixed_factor, hw) + +static unsigned long clk_factor_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct clk_fixed_factor *fix = to_clk_fixed_factor(hw); + + return parent_rate * fix->mult / fix->div; +} + +static long clk_factor_round_rate(struct clk_hw *hw, unsigned long rate, + unsigned long *prate) +{ + struct clk_fixed_factor *fix = to_clk_fixed_factor(hw); + + if (__clk_get_flags(hw->clk) & CLK_SET_RATE_PARENT) { + unsigned long best_parent; + + best_parent = (rate / fix->mult) * fix->div; + *prate = __clk_round_rate(__clk_get_parent(hw->clk), + best_parent); + } + + return (*prate / fix->div) * fix->mult; +} + +static int clk_factor_set_rate(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate) +{ + return 0; +} + +struct clk_ops clk_fixed_factor_ops = { + .round_rate = clk_factor_round_rate, + .set_rate = clk_factor_set_rate, + .recalc_rate = clk_factor_recalc_rate, +}; +EXPORT_SYMBOL_GPL(clk_fixed_factor_ops); + +struct clk *clk_register_fixed_factor(struct device *dev, const char *name, + const char *parent_name, unsigned long flags, + unsigned int mult, unsigned int div) +{ + struct clk_fixed_factor *fix; + struct clk_init_data init; + struct clk *clk; + + fix = kmalloc(sizeof(*fix), GFP_KERNEL); + if (!fix) { + pr_err("%s: could not allocate fixed factor clk\n", __func__); + return ERR_PTR(-ENOMEM); + } + + /* struct clk_fixed_factor assignments */ + fix->mult = mult; + fix->div = div; + fix->hw.init = &init; + + init.name = name; + init.ops = &clk_fixed_factor_ops; + init.flags = flags; + init.parent_names = &parent_name; + init.num_parents = 1; + + clk = clk_register(dev, &fix->hw); + + if (IS_ERR(clk)) + kfree(fix); + + return clk; +} diff --git a/include/linux/clk-private.h b/include/linux/clk-private.h index b258532162b8..eb3f84bc5325 100644 --- a/include/linux/clk-private.h +++ b/include/linux/clk-private.h @@ -143,6 +143,26 @@ struct clk { DEFINE_CLK(_name, clk_mux_ops, _flags, _parent_names, \ _parents); +#define DEFINE_CLK_FIXED_FACTOR(_name, _parent_name, \ + _parent_ptr, _flags, \ + _mult, _div) \ + static struct clk _name; \ + static const char *_name##_parent_names[] = { \ + _parent_name, \ + }; \ + static struct clk *_name##_parents[] = { \ + _parent_ptr, \ + }; \ + static struct clk_fixed_factor _name##_hw = { \ + .hw = { \ + .clk = &_name, \ + }, \ + .mult = _mult, \ + .div = _div, \ + }; \ + DEFINE_CLK(_name, clk_fixed_factor_ops, _flags, \ + _name##_parent_names, _name##_parents); + /** * __clk_init - initialize the data structures in a struct clk * @dev: device initializing this clk, placeholder for now diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h index 5db3412106b3..c1c23b9ec368 100644 --- a/include/linux/clk-provider.h +++ b/include/linux/clk-provider.h @@ -276,6 +276,29 @@ struct clk *clk_register_mux(struct device *dev, const char *name, void __iomem *reg, u8 shift, u8 width, u8 clk_mux_flags, spinlock_t *lock); +/** + * struct clk_fixed_factor - fixed multiplier and divider clock + * + * @hw: handle between common and hardware-specific interfaces + * @mult: multiplier + * @div: divider + * + * Clock with a fixed multiplier and divider. The output frequency is the + * parent clock rate divided by div and multiplied by mult. + * Implements .recalc_rate, .set_rate and .round_rate + */ + +struct clk_fixed_factor { + struct clk_hw hw; + unsigned int mult; + unsigned int div; +}; + +extern struct clk_ops clk_fixed_factor_ops; +struct clk *clk_register_fixed_factor(struct device *dev, const char *name, + const char *parent_name, unsigned long flags, + unsigned int mult, unsigned int div); + /** * clk_register - allocate a new clock, register it and return an opaque cookie * @dev: device that is registering this clock -- cgit v1.2.3 From c7eea50b980b28f4edaa0cfbdf2456532472bc03 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Wed, 9 May 2012 09:22:40 +0200 Subject: pinctrl: (cosmetic) fix two entries in DocBook comments This removes a repeated word and a repeated and incomplete line from two pinctrl headers. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Linus Walleij --- include/linux/pinctrl/pinconf.h | 1 - include/linux/pinctrl/pinmux.h | 2 +- 2 files changed, 1 insertion(+), 2 deletions(-) diff --git a/include/linux/pinctrl/pinconf.h b/include/linux/pinctrl/pinconf.h index 7b9d5f00ed37..e7a720104a47 100644 --- a/include/linux/pinctrl/pinconf.h +++ b/include/linux/pinctrl/pinconf.h @@ -25,7 +25,6 @@ struct seq_file; * @pin_config_get: get the config of a certain pin, if the requested config * is not available on this controller this should return -ENOTSUPP * and if it is available but disabled it should return -EINVAL - * @pin_config_get: get the config of a certain pin * @pin_config_set: configure an individual pin * @pin_config_group_get: get configurations for an entire pin group * @pin_config_group_set: configure all pins in a group diff --git a/include/linux/pinctrl/pinmux.h b/include/linux/pinctrl/pinmux.h index dd7bef61d066..1818dcbdd9ab 100644 --- a/include/linux/pinctrl/pinmux.h +++ b/include/linux/pinctrl/pinmux.h @@ -23,7 +23,7 @@ struct pinctrl_dev; /** * struct pinmux_ops - pinmux operations, to be implemented by pin controller * drivers that support pinmuxing - * @request: called by the core to see if a certain pin can be made available + * @request: called by the core to see if a certain pin can be made * available for muxing. This is called by the core to acquire the pins * before selecting any actual mux setting across a function. The driver * is allowed to answer "no" by returning a negative error code -- cgit v1.2.3 From 30551c0108e0d2fed48778a6bbd52843088bcb7b Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Sat, 21 Apr 2012 13:15:37 +0530 Subject: SPEAr: Add DT bindings for SPEAr's timer All SPEAr SoC's use ST's Timer module. This patch adds device tree probing capability for that. Signed-off-by: Viresh Kumar Signed-off-by: Arnd Bergmann --- .../devicetree/bindings/arm/spear-timer.txt | 18 +++++++++++++ arch/arm/boot/dts/spear3xx.dtsi | 6 +++++ arch/arm/boot/dts/spear600.dtsi | 6 +++++ arch/arm/mach-spear3xx/include/mach/generic.h | 2 +- arch/arm/mach-spear3xx/include/mach/irqs.h | 1 - arch/arm/mach-spear3xx/include/mach/spear.h | 1 - arch/arm/mach-spear3xx/spear3xx.c | 2 +- arch/arm/mach-spear6xx/include/mach/generic.h | 2 +- arch/arm/mach-spear6xx/include/mach/irqs.h | 3 --- arch/arm/mach-spear6xx/include/mach/spear.h | 1 - arch/arm/mach-spear6xx/spear6xx.c | 2 +- arch/arm/plat-spear/time.c | 31 +++++++++++++++------- 12 files changed, 56 insertions(+), 19 deletions(-) create mode 100644 Documentation/devicetree/bindings/arm/spear-timer.txt diff --git a/Documentation/devicetree/bindings/arm/spear-timer.txt b/Documentation/devicetree/bindings/arm/spear-timer.txt new file mode 100644 index 000000000000..c0017221cf55 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/spear-timer.txt @@ -0,0 +1,18 @@ +* SPEAr ARM Timer + +** Timer node required properties: + +- compatible : Should be: + "st,spear-timer" +- reg: Address range of the timer registers +- interrupt-parent: Should be the phandle for the interrupt controller + that services interrupts for this device +- interrupt: Should contain the timer interrupt number + +Example: + + timer@f0000000 { + compatible = "st,spear-timer"; + reg = <0xf0000000 0x400>; + interrupts = <2>; + }; diff --git a/arch/arm/boot/dts/spear3xx.dtsi b/arch/arm/boot/dts/spear3xx.dtsi index 0ae7c8e86311..91072553963f 100644 --- a/arch/arm/boot/dts/spear3xx.dtsi +++ b/arch/arm/boot/dts/spear3xx.dtsi @@ -139,6 +139,12 @@ interrupts = <12>; status = "disabled"; }; + + timer@f0000000 { + compatible = "st,spear-timer"; + reg = <0xf0000000 0x400>; + interrupts = <2>; + }; }; }; }; diff --git a/arch/arm/boot/dts/spear600.dtsi b/arch/arm/boot/dts/spear600.dtsi index d777e3a6f178..089f0a42c50e 100644 --- a/arch/arm/boot/dts/spear600.dtsi +++ b/arch/arm/boot/dts/spear600.dtsi @@ -177,6 +177,12 @@ interrupts = <28>; status = "disabled"; }; + + timer@f0000000 { + compatible = "st,spear-timer"; + reg = <0xf0000000 0x400>; + interrupts = <16>; + }; }; }; }; diff --git a/arch/arm/mach-spear3xx/include/mach/generic.h b/arch/arm/mach-spear3xx/include/mach/generic.h index e4f4d721cda2..efb69357429a 100644 --- a/arch/arm/mach-spear3xx/include/mach/generic.h +++ b/arch/arm/mach-spear3xx/include/mach/generic.h @@ -28,7 +28,7 @@ extern struct pl022_ssp_controller pl022_plat_data; extern struct pl08x_platform_data pl080_plat_data; /* Add spear3xx family function declarations here */ -void __init spear_setup_timer(resource_size_t base, int irq); +void __init spear_setup_of_timer(void); void __init spear3xx_map_io(void); void __init spear3xx_dt_init_irq(void); diff --git a/arch/arm/mach-spear3xx/include/mach/irqs.h b/arch/arm/mach-spear3xx/include/mach/irqs.h index 319620a1afb4..51bd62a0254c 100644 --- a/arch/arm/mach-spear3xx/include/mach/irqs.h +++ b/arch/arm/mach-spear3xx/include/mach/irqs.h @@ -16,7 +16,6 @@ /* FIXME: probe all these from DT */ #define SPEAR3XX_IRQ_INTRCOMM_RAS_ARM 1 -#define SPEAR3XX_IRQ_CPU_GPT1_1 2 #define SPEAR3XX_IRQ_GEN_RAS_1 28 #define SPEAR3XX_IRQ_GEN_RAS_2 29 #define SPEAR3XX_IRQ_GEN_RAS_3 30 diff --git a/arch/arm/mach-spear3xx/include/mach/spear.h b/arch/arm/mach-spear3xx/include/mach/spear.h index 6d4dadc67633..04da906b0d4c 100644 --- a/arch/arm/mach-spear3xx/include/mach/spear.h +++ b/arch/arm/mach-spear3xx/include/mach/spear.h @@ -26,7 +26,6 @@ /* ML1 - Multi Layer CPU Subsystem */ #define SPEAR3XX_ICM3_ML1_2_BASE UL(0xF0000000) #define VA_SPEAR6XX_ML_CPU_BASE UL(0xF0000000) -#define SPEAR3XX_CPU_TMR_BASE UL(0xF0000000) /* ICM3 - Basic Subsystem */ #define SPEAR3XX_ICM3_SMI_CTRL_BASE UL(0xFC000000) diff --git a/arch/arm/mach-spear3xx/spear3xx.c b/arch/arm/mach-spear3xx/spear3xx.c index bbb11efa6056..25c6c67d5b07 100644 --- a/arch/arm/mach-spear3xx/spear3xx.c +++ b/arch/arm/mach-spear3xx/spear3xx.c @@ -534,7 +534,7 @@ static void __init spear3xx_timer_init(void) clk_put(gpt_clk); clk_put(pclk); - spear_setup_timer(SPEAR3XX_CPU_TMR_BASE, SPEAR3XX_IRQ_CPU_GPT1_1); + spear_setup_of_timer(); } struct sys_timer spear3xx_timer = { diff --git a/arch/arm/mach-spear6xx/include/mach/generic.h b/arch/arm/mach-spear6xx/include/mach/generic.h index 7167fd331d86..65514b159370 100644 --- a/arch/arm/mach-spear6xx/include/mach/generic.h +++ b/arch/arm/mach-spear6xx/include/mach/generic.h @@ -16,7 +16,7 @@ #include -void __init spear_setup_timer(resource_size_t base, int irq); +void __init spear_setup_of_timer(void); void spear_restart(char, const char *); void __init spear6xx_clk_init(void); diff --git a/arch/arm/mach-spear6xx/include/mach/irqs.h b/arch/arm/mach-spear6xx/include/mach/irqs.h index 2b735389e74b..37a5c411a866 100644 --- a/arch/arm/mach-spear6xx/include/mach/irqs.h +++ b/arch/arm/mach-spear6xx/include/mach/irqs.h @@ -16,9 +16,6 @@ /* IRQ definitions */ /* VIC 1 */ -/* FIXME: probe this from DT */ -#define IRQ_CPU_GPT1_1 16 - #define IRQ_VIC_END 64 /* GPIO pins virtual irqs */ diff --git a/arch/arm/mach-spear6xx/include/mach/spear.h b/arch/arm/mach-spear6xx/include/mach/spear.h index d278ed047a53..cb8ed2f4dc85 100644 --- a/arch/arm/mach-spear6xx/include/mach/spear.h +++ b/arch/arm/mach-spear6xx/include/mach/spear.h @@ -25,7 +25,6 @@ /* ML-1, 2 - Multi Layer CPU Subsystem */ #define SPEAR6XX_ML_CPU_BASE UL(0xF0000000) #define VA_SPEAR6XX_ML_CPU_BASE UL(0xF0000000) -#define SPEAR6XX_CPU_TMR_BASE UL(0xF0000000) /* ICM3 - Basic Subsystem */ #define SPEAR6XX_ICM3_SMI_CTRL_BASE UL(0xFC000000) diff --git a/arch/arm/mach-spear6xx/spear6xx.c b/arch/arm/mach-spear6xx/spear6xx.c index de194dbb8371..7ae4d5be6cb5 100644 --- a/arch/arm/mach-spear6xx/spear6xx.c +++ b/arch/arm/mach-spear6xx/spear6xx.c @@ -448,7 +448,7 @@ static void __init spear6xx_timer_init(void) clk_put(gpt_clk); clk_put(pclk); - spear_setup_timer(SPEAR6XX_CPU_TMR_BASE, IRQ_CPU_GPT1_1); + spear_setup_of_timer(); } struct sys_timer spear6xx_timer = { diff --git a/arch/arm/plat-spear/time.c b/arch/arm/plat-spear/time.c index a3164d1647fd..9a378987bbb1 100644 --- a/arch/arm/plat-spear/time.c +++ b/arch/arm/plat-spear/time.c @@ -18,6 +18,8 @@ #include #include #include +#include +#include #include #include #include @@ -197,19 +199,32 @@ static void __init spear_clockevent_init(int irq) setup_irq(irq, &spear_timer_irq); } -void __init spear_setup_timer(resource_size_t base, int irq) +const static struct of_device_id timer_of_match[] __initconst = { + { .compatible = "st,spear-timer", }, + { }, +}; + +void __init spear_setup_of_timer(void) { - int ret; + struct device_node *np; + int irq, ret; + + np = of_find_matching_node(NULL, timer_of_match); + if (!np) { + pr_err("%s: No timer passed via DT\n", __func__); + return; + } - if (!request_mem_region(base, SZ_1K, "gpt0")) { - pr_err("%s:cannot get IO addr\n", __func__); + irq = irq_of_parse_and_map(np, 0); + if (!irq) { + pr_err("%s: No irq passed for timer via DT\n", __func__); return; } - gpt_base = ioremap(base, SZ_1K); + gpt_base = of_iomap(np, 0); if (!gpt_base) { - pr_err("%s:ioremap failed for gpt\n", __func__); - goto err_mem; + pr_err("%s: of iomap failed\n", __func__); + return; } gpt_clk = clk_get_sys("gpt0", NULL); @@ -233,6 +248,4 @@ err_clk: clk_put(gpt_clk); err_iomap: iounmap(gpt_base); -err_mem: - release_mem_region(base, SZ_1K); } -- cgit v1.2.3 From 55b8fd4f428501b0f35d62b8313311fd9863c188 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Tue, 10 Apr 2012 09:02:35 +0530 Subject: SPEAr: clk: Add VCO-PLL Synthesizer clock All SPEAr SoC's contain PLLs. Their Fout is derived based on following equations - In normal mode vco = (2 * M[15:8] * Fin)/N - In Dithered mode vco = (2 * M[15:0] * Fin)/(256 * N) pll_rate = vco/2^p vco and pll are very closely bound to each other, "vco needs to program: mode, m & n" and "pll needs to program p", both share common enable/disable logic and registers. This patch adds in support for this type of clock. Signed-off-by: Viresh Kumar Reviewed-by: Mike Turquette --- drivers/clk/Makefile | 3 + drivers/clk/spear/Makefile | 5 + drivers/clk/spear/clk-vco-pll.c | 363 ++++++++++++++++++++++++++++++++++++++++ drivers/clk/spear/clk.c | 36 ++++ drivers/clk/spear/clk.h | 58 +++++++ 5 files changed, 465 insertions(+) create mode 100644 drivers/clk/spear/Makefile create mode 100644 drivers/clk/spear/clk-vco-pll.c create mode 100644 drivers/clk/spear/clk.c create mode 100644 drivers/clk/spear/clk.h diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile index 24aa7144811b..0f5e03d1ef5c 100644 --- a/drivers/clk/Makefile +++ b/drivers/clk/Makefile @@ -2,3 +2,6 @@ obj-$(CONFIG_CLKDEV_LOOKUP) += clkdev.o obj-$(CONFIG_COMMON_CLK) += clk.o clk-fixed-rate.o clk-gate.o \ clk-mux.o clk-divider.o clk-fixed-factor.o + +# SoCs specific +obj-$(CONFIG_PLAT_SPEAR) += spear/ diff --git a/drivers/clk/spear/Makefile b/drivers/clk/spear/Makefile new file mode 100644 index 000000000000..3fc2a3026cc1 --- /dev/null +++ b/drivers/clk/spear/Makefile @@ -0,0 +1,5 @@ +# +# SPEAr Clock specific Makefile +# + +obj-y += clk.o clk-vco-pll.o diff --git a/drivers/clk/spear/clk-vco-pll.c b/drivers/clk/spear/clk-vco-pll.c new file mode 100644 index 000000000000..dcd4bdf4b0d9 --- /dev/null +++ b/drivers/clk/spear/clk-vco-pll.c @@ -0,0 +1,363 @@ +/* + * Copyright (C) 2012 ST Microelectronics + * Viresh Kumar + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + * + * VCO-PLL clock implementation + */ + +#define pr_fmt(fmt) "clk-vco-pll: " fmt + +#include +#include +#include +#include +#include "clk.h" + +/* + * DOC: VCO-PLL clock + * + * VCO and PLL rate are derived from following equations: + * + * In normal mode + * vco = (2 * M[15:8] * Fin)/N + * + * In Dithered mode + * vco = (2 * M[15:0] * Fin)/(256 * N) + * + * pll_rate = pll/2^p + * + * vco and pll are very closely bound to each other, "vco needs to program: + * mode, m & n" and "pll needs to program p", both share common enable/disable + * logic. + * + * clk_register_vco_pll() registers instances of both vco & pll. + * CLK_SET_RATE_PARENT flag is forced for pll, as it will always pass its + * set_rate to vco. A single rate table exists for both the clocks, which + * configures m, n and p. + */ + +/* PLL_CTR register masks */ +#define PLL_MODE_NORMAL 0 +#define PLL_MODE_FRACTION 1 +#define PLL_MODE_DITH_DSM 2 +#define PLL_MODE_DITH_SSM 3 +#define PLL_MODE_MASK 3 +#define PLL_MODE_SHIFT 3 +#define PLL_ENABLE 2 + +#define PLL_LOCK_SHIFT 0 +#define PLL_LOCK_MASK 1 + +/* PLL FRQ register masks */ +#define PLL_NORM_FDBK_M_MASK 0xFF +#define PLL_NORM_FDBK_M_SHIFT 24 +#define PLL_DITH_FDBK_M_MASK 0xFFFF +#define PLL_DITH_FDBK_M_SHIFT 16 +#define PLL_DIV_P_MASK 0x7 +#define PLL_DIV_P_SHIFT 8 +#define PLL_DIV_N_MASK 0xFF +#define PLL_DIV_N_SHIFT 0 + +#define to_clk_vco(_hw) container_of(_hw, struct clk_vco, hw) +#define to_clk_pll(_hw) container_of(_hw, struct clk_pll, hw) + +/* Calculates pll clk rate for specific value of mode, m, n and p */ +static unsigned long pll_calc_rate(struct pll_rate_tbl *rtbl, + unsigned long prate, int index, unsigned long *pll_rate) +{ + unsigned long rate = prate; + unsigned int mode; + + mode = rtbl[index].mode ? 256 : 1; + rate = (((2 * rate / 10000) * rtbl[index].m) / (mode * rtbl[index].n)); + + if (pll_rate) + *pll_rate = (rate / (1 << rtbl[index].p)) * 10000; + + return rate * 10000; +} + +static long clk_pll_round_rate_index(struct clk_hw *hw, unsigned long drate, + unsigned long *prate, int *index) +{ + struct clk_pll *pll = to_clk_pll(hw); + unsigned long prev_rate, vco_prev_rate, rate = 0; + unsigned long vco_parent_rate = + __clk_get_rate(__clk_get_parent(__clk_get_parent(hw->clk))); + + if (!prate) { + pr_err("%s: prate is must for pll clk\n", __func__); + return -EINVAL; + } + + for (*index = 0; *index < pll->vco->rtbl_cnt; (*index)++) { + prev_rate = rate; + vco_prev_rate = *prate; + *prate = pll_calc_rate(pll->vco->rtbl, vco_parent_rate, *index, + &rate); + if (drate < rate) { + /* previous clock was best */ + if (*index) { + rate = prev_rate; + *prate = vco_prev_rate; + (*index)--; + } + break; + } + } + + return rate; +} + +static long clk_pll_round_rate(struct clk_hw *hw, unsigned long drate, + unsigned long *prate) +{ + int unused; + + return clk_pll_round_rate_index(hw, drate, prate, &unused); +} + +static unsigned long clk_pll_recalc_rate(struct clk_hw *hw, unsigned long + parent_rate) +{ + struct clk_pll *pll = to_clk_pll(hw); + unsigned long flags = 0; + unsigned int p; + + if (pll->vco->lock) + spin_lock_irqsave(pll->vco->lock, flags); + + p = readl_relaxed(pll->vco->cfg_reg); + + if (pll->vco->lock) + spin_unlock_irqrestore(pll->vco->lock, flags); + + p = (p >> PLL_DIV_P_SHIFT) & PLL_DIV_P_MASK; + + return parent_rate / (1 << p); +} + +static int clk_pll_set_rate(struct clk_hw *hw, unsigned long drate, + unsigned long prate) +{ + struct clk_pll *pll = to_clk_pll(hw); + struct pll_rate_tbl *rtbl = pll->vco->rtbl; + unsigned long flags = 0, val; + int i; + + clk_pll_round_rate_index(hw, drate, NULL, &i); + + if (pll->vco->lock) + spin_lock_irqsave(pll->vco->lock, flags); + + val = readl_relaxed(pll->vco->cfg_reg); + val &= ~(PLL_DIV_P_MASK << PLL_DIV_P_SHIFT); + val |= (rtbl[i].p & PLL_DIV_P_MASK) << PLL_DIV_P_SHIFT; + writel_relaxed(val, pll->vco->cfg_reg); + + if (pll->vco->lock) + spin_unlock_irqrestore(pll->vco->lock, flags); + + return 0; +} + +static struct clk_ops clk_pll_ops = { + .recalc_rate = clk_pll_recalc_rate, + .round_rate = clk_pll_round_rate, + .set_rate = clk_pll_set_rate, +}; + +static inline unsigned long vco_calc_rate(struct clk_hw *hw, + unsigned long prate, int index) +{ + struct clk_vco *vco = to_clk_vco(hw); + + return pll_calc_rate(vco->rtbl, prate, index, NULL); +} + +static long clk_vco_round_rate(struct clk_hw *hw, unsigned long drate, + unsigned long *prate) +{ + struct clk_vco *vco = to_clk_vco(hw); + int unused; + + return clk_round_rate_index(hw, drate, *prate, vco_calc_rate, + vco->rtbl_cnt, &unused); +} + +static unsigned long clk_vco_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct clk_vco *vco = to_clk_vco(hw); + unsigned long flags = 0; + unsigned int num = 2, den = 0, val, mode = 0; + + if (vco->lock) + spin_lock_irqsave(vco->lock, flags); + + mode = (readl_relaxed(vco->mode_reg) >> PLL_MODE_SHIFT) & PLL_MODE_MASK; + + val = readl_relaxed(vco->cfg_reg); + + if (vco->lock) + spin_unlock_irqrestore(vco->lock, flags); + + den = (val >> PLL_DIV_N_SHIFT) & PLL_DIV_N_MASK; + + /* calculate numerator & denominator */ + if (!mode) { + /* Normal mode */ + num *= (val >> PLL_NORM_FDBK_M_SHIFT) & PLL_NORM_FDBK_M_MASK; + } else { + /* Dithered mode */ + num *= (val >> PLL_DITH_FDBK_M_SHIFT) & PLL_DITH_FDBK_M_MASK; + den *= 256; + } + + if (!den) { + WARN(1, "%s: denominator can't be zero\n", __func__); + return 0; + } + + return (((parent_rate / 10000) * num) / den) * 10000; +} + +/* Configures new clock rate of vco */ +static int clk_vco_set_rate(struct clk_hw *hw, unsigned long drate, + unsigned long prate) +{ + struct clk_vco *vco = to_clk_vco(hw); + struct pll_rate_tbl *rtbl = vco->rtbl; + unsigned long flags = 0, val; + int i; + + clk_round_rate_index(hw, drate, prate, vco_calc_rate, vco->rtbl_cnt, + &i); + + if (vco->lock) + spin_lock_irqsave(vco->lock, flags); + + val = readl_relaxed(vco->mode_reg); + val &= ~(PLL_MODE_MASK << PLL_MODE_SHIFT); + val |= (rtbl[i].mode & PLL_MODE_MASK) << PLL_MODE_SHIFT; + writel_relaxed(val, vco->mode_reg); + + val = readl_relaxed(vco->cfg_reg); + val &= ~(PLL_DIV_N_MASK << PLL_DIV_N_SHIFT); + val |= (rtbl[i].n & PLL_DIV_N_MASK) << PLL_DIV_N_SHIFT; + + val &= ~(PLL_DITH_FDBK_M_MASK << PLL_DITH_FDBK_M_SHIFT); + if (rtbl[i].mode) + val |= (rtbl[i].m & PLL_DITH_FDBK_M_MASK) << + PLL_DITH_FDBK_M_SHIFT; + else + val |= (rtbl[i].m & PLL_NORM_FDBK_M_MASK) << + PLL_NORM_FDBK_M_SHIFT; + + writel_relaxed(val, vco->cfg_reg); + + if (vco->lock) + spin_unlock_irqrestore(vco->lock, flags); + + return 0; +} + +static struct clk_ops clk_vco_ops = { + .recalc_rate = clk_vco_recalc_rate, + .round_rate = clk_vco_round_rate, + .set_rate = clk_vco_set_rate, +}; + +struct clk *clk_register_vco_pll(const char *vco_name, const char *pll_name, + const char *vco_gate_name, const char *parent_name, + unsigned long flags, void __iomem *mode_reg, void __iomem + *cfg_reg, struct pll_rate_tbl *rtbl, u8 rtbl_cnt, + spinlock_t *lock, struct clk **pll_clk, + struct clk **vco_gate_clk) +{ + struct clk_vco *vco; + struct clk_pll *pll; + struct clk *vco_clk, *tpll_clk, *tvco_gate_clk; + struct clk_init_data vco_init, pll_init; + const char **vco_parent_name; + + if (!vco_name || !pll_name || !parent_name || !mode_reg || !cfg_reg || + !rtbl || !rtbl_cnt) { + pr_err("Invalid arguments passed"); + return ERR_PTR(-EINVAL); + } + + vco = kzalloc(sizeof(*vco), GFP_KERNEL); + if (!vco) { + pr_err("could not allocate vco clk\n"); + return ERR_PTR(-ENOMEM); + } + + pll = kzalloc(sizeof(*pll), GFP_KERNEL); + if (!pll) { + pr_err("could not allocate pll clk\n"); + goto free_vco; + } + + /* struct clk_vco assignments */ + vco->mode_reg = mode_reg; + vco->cfg_reg = cfg_reg; + vco->rtbl = rtbl; + vco->rtbl_cnt = rtbl_cnt; + vco->lock = lock; + vco->hw.init = &vco_init; + + pll->vco = vco; + pll->hw.init = &pll_init; + + if (vco_gate_name) { + tvco_gate_clk = clk_register_gate(NULL, vco_gate_name, + parent_name, 0, mode_reg, PLL_ENABLE, 0, lock); + if (IS_ERR_OR_NULL(tvco_gate_clk)) + goto free_pll; + + if (vco_gate_clk) + *vco_gate_clk = tvco_gate_clk; + vco_parent_name = &vco_gate_name; + } else { + vco_parent_name = &parent_name; + } + + vco_init.name = vco_name; + vco_init.ops = &clk_vco_ops; + vco_init.flags = flags; + vco_init.parent_names = vco_parent_name; + vco_init.num_parents = 1; + + pll_init.name = pll_name; + pll_init.ops = &clk_pll_ops; + pll_init.flags = CLK_SET_RATE_PARENT; + pll_init.parent_names = &vco_name; + pll_init.num_parents = 1; + + vco_clk = clk_register(NULL, &vco->hw); + if (IS_ERR_OR_NULL(vco_clk)) + goto free_pll; + + tpll_clk = clk_register(NULL, &pll->hw); + if (IS_ERR_OR_NULL(tpll_clk)) + goto free_pll; + + if (pll_clk) + *pll_clk = tpll_clk; + + return vco_clk; + +free_pll: + kfree(pll); +free_vco: + kfree(vco); + + pr_err("Failed to register vco pll clock\n"); + + return ERR_PTR(-ENOMEM); +} diff --git a/drivers/clk/spear/clk.c b/drivers/clk/spear/clk.c new file mode 100644 index 000000000000..376d4e5ff326 --- /dev/null +++ b/drivers/clk/spear/clk.c @@ -0,0 +1,36 @@ +/* + * Copyright (C) 2012 ST Microelectronics + * Viresh Kumar + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + * + * SPEAr clk - Common routines + */ + +#include +#include +#include "clk.h" + +long clk_round_rate_index(struct clk_hw *hw, unsigned long drate, + unsigned long parent_rate, clk_calc_rate calc_rate, u8 rtbl_cnt, + int *index) +{ + unsigned long prev_rate, rate = 0; + + for (*index = 0; *index < rtbl_cnt; (*index)++) { + prev_rate = rate; + rate = calc_rate(hw, parent_rate, *index); + if (drate < rate) { + /* previous clock was best */ + if (*index) { + rate = prev_rate; + (*index)--; + } + break; + } + } + + return rate; +} diff --git a/drivers/clk/spear/clk.h b/drivers/clk/spear/clk.h new file mode 100644 index 000000000000..9979b7f7e767 --- /dev/null +++ b/drivers/clk/spear/clk.h @@ -0,0 +1,58 @@ +/* + * Clock framework definitions for SPEAr platform + * + * Copyright (C) 2012 ST Microelectronics + * Viresh Kumar + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __SPEAR_CLK_H +#define __SPEAR_CLK_H + +#include +#include +#include + +/* VCO-PLL clk */ +struct pll_rate_tbl { + u8 mode; + u16 m; + u8 n; + u8 p; +}; + +struct clk_vco { + struct clk_hw hw; + void __iomem *mode_reg; + void __iomem *cfg_reg; + struct pll_rate_tbl *rtbl; + u8 rtbl_cnt; + spinlock_t *lock; +}; + +struct clk_pll { + struct clk_hw hw; + struct clk_vco *vco; + const char *parent[1]; + spinlock_t *lock; +}; + +typedef unsigned long (*clk_calc_rate)(struct clk_hw *hw, unsigned long prate, + int index); + +/* clk register routines */ +struct clk *clk_register_vco_pll(const char *vco_name, const char *pll_name, + const char *vco_gate_name, const char *parent_name, + unsigned long flags, void __iomem *mode_reg, void __iomem + *cfg_reg, struct pll_rate_tbl *rtbl, u8 rtbl_cnt, + spinlock_t *lock, struct clk **pll_clk, + struct clk **vco_gate_clk); + +long clk_round_rate_index(struct clk_hw *hw, unsigned long drate, + unsigned long parent_rate, clk_calc_rate calc_rate, u8 rtbl_cnt, + int *index); + +#endif /* __SPEAR_CLK_H */ -- cgit v1.2.3 From 5335a639ecc5646cbe8e99086fb7e743b801ac58 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Wed, 11 Apr 2012 18:04:23 +0530 Subject: SPEAr: clk: Add Auxiliary Synthesizer clock All SPEAr SoC's contain Auxiliary Synthesizers. Their Fout is derived based on values of eq, x and y. Fout from synthesizer can be given from two equations: Fout1 = (Fin * X/Y)/2 EQ1 Fout2 = Fin * X/Y EQ2 This patch adds in support for this type of clock. Signed-off-by: Viresh Kumar Reviewed-by: Mike Turquette --- drivers/clk/spear/Makefile | 2 +- drivers/clk/spear/clk-aux-synth.c | 198 ++++++++++++++++++++++++++++++++++++++ drivers/clk/spear/clk.h | 43 +++++++++ 3 files changed, 242 insertions(+), 1 deletion(-) create mode 100644 drivers/clk/spear/clk-aux-synth.c diff --git a/drivers/clk/spear/Makefile b/drivers/clk/spear/Makefile index 3fc2a3026cc1..e36d8c665724 100644 --- a/drivers/clk/spear/Makefile +++ b/drivers/clk/spear/Makefile @@ -2,4 +2,4 @@ # SPEAr Clock specific Makefile # -obj-y += clk.o clk-vco-pll.o +obj-y += clk.o clk-aux-synth.o clk-vco-pll.o diff --git a/drivers/clk/spear/clk-aux-synth.c b/drivers/clk/spear/clk-aux-synth.c new file mode 100644 index 000000000000..af34074e702b --- /dev/null +++ b/drivers/clk/spear/clk-aux-synth.c @@ -0,0 +1,198 @@ +/* + * Copyright (C) 2012 ST Microelectronics + * Viresh Kumar + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + * + * Auxiliary Synthesizer clock implementation + */ + +#define pr_fmt(fmt) "clk-aux-synth: " fmt + +#include +#include +#include +#include +#include "clk.h" + +/* + * DOC: Auxiliary Synthesizer clock + * + * Aux synth gives rate for different values of eq, x and y + * + * Fout from synthesizer can be given from two equations: + * Fout1 = (Fin * X/Y)/2 EQ1 + * Fout2 = Fin * X/Y EQ2 + */ + +#define to_clk_aux(_hw) container_of(_hw, struct clk_aux, hw) + +static struct aux_clk_masks default_aux_masks = { + .eq_sel_mask = AUX_EQ_SEL_MASK, + .eq_sel_shift = AUX_EQ_SEL_SHIFT, + .eq1_mask = AUX_EQ1_SEL, + .eq2_mask = AUX_EQ2_SEL, + .xscale_sel_mask = AUX_XSCALE_MASK, + .xscale_sel_shift = AUX_XSCALE_SHIFT, + .yscale_sel_mask = AUX_YSCALE_MASK, + .yscale_sel_shift = AUX_YSCALE_SHIFT, + .enable_bit = AUX_SYNT_ENB, +}; + +static unsigned long aux_calc_rate(struct clk_hw *hw, unsigned long prate, + int index) +{ + struct clk_aux *aux = to_clk_aux(hw); + struct aux_rate_tbl *rtbl = aux->rtbl; + u8 eq = rtbl[index].eq ? 1 : 2; + + return (((prate / 10000) * rtbl[index].xscale) / + (rtbl[index].yscale * eq)) * 10000; +} + +static long clk_aux_round_rate(struct clk_hw *hw, unsigned long drate, + unsigned long *prate) +{ + struct clk_aux *aux = to_clk_aux(hw); + int unused; + + return clk_round_rate_index(hw, drate, *prate, aux_calc_rate, + aux->rtbl_cnt, &unused); +} + +static unsigned long clk_aux_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct clk_aux *aux = to_clk_aux(hw); + unsigned int num = 1, den = 1, val, eqn; + unsigned long flags = 0; + + if (aux->lock) + spin_lock_irqsave(aux->lock, flags); + + val = readl_relaxed(aux->reg); + + if (aux->lock) + spin_unlock_irqrestore(aux->lock, flags); + + eqn = (val >> aux->masks->eq_sel_shift) & aux->masks->eq_sel_mask; + if (eqn == aux->masks->eq1_mask) + den = 2; + + /* calculate numerator */ + num = (val >> aux->masks->xscale_sel_shift) & + aux->masks->xscale_sel_mask; + + /* calculate denominator */ + den *= (val >> aux->masks->yscale_sel_shift) & + aux->masks->yscale_sel_mask; + + if (!den) + return 0; + + return (((parent_rate / 10000) * num) / den) * 10000; +} + +/* Configures new clock rate of aux */ +static int clk_aux_set_rate(struct clk_hw *hw, unsigned long drate, + unsigned long prate) +{ + struct clk_aux *aux = to_clk_aux(hw); + struct aux_rate_tbl *rtbl = aux->rtbl; + unsigned long val, flags = 0; + int i; + + clk_round_rate_index(hw, drate, prate, aux_calc_rate, aux->rtbl_cnt, + &i); + + if (aux->lock) + spin_lock_irqsave(aux->lock, flags); + + val = readl_relaxed(aux->reg) & + ~(aux->masks->eq_sel_mask << aux->masks->eq_sel_shift); + val |= (rtbl[i].eq & aux->masks->eq_sel_mask) << + aux->masks->eq_sel_shift; + val &= ~(aux->masks->xscale_sel_mask << aux->masks->xscale_sel_shift); + val |= (rtbl[i].xscale & aux->masks->xscale_sel_mask) << + aux->masks->xscale_sel_shift; + val &= ~(aux->masks->yscale_sel_mask << aux->masks->yscale_sel_shift); + val |= (rtbl[i].yscale & aux->masks->yscale_sel_mask) << + aux->masks->yscale_sel_shift; + writel_relaxed(val, aux->reg); + + if (aux->lock) + spin_unlock_irqrestore(aux->lock, flags); + + return 0; +} + +static struct clk_ops clk_aux_ops = { + .recalc_rate = clk_aux_recalc_rate, + .round_rate = clk_aux_round_rate, + .set_rate = clk_aux_set_rate, +}; + +struct clk *clk_register_aux(const char *aux_name, const char *gate_name, + const char *parent_name, unsigned long flags, void __iomem *reg, + struct aux_clk_masks *masks, struct aux_rate_tbl *rtbl, + u8 rtbl_cnt, spinlock_t *lock, struct clk **gate_clk) +{ + struct clk_aux *aux; + struct clk_init_data init; + struct clk *clk; + + if (!aux_name || !parent_name || !reg || !rtbl || !rtbl_cnt) { + pr_err("Invalid arguments passed"); + return ERR_PTR(-EINVAL); + } + + aux = kzalloc(sizeof(*aux), GFP_KERNEL); + if (!aux) { + pr_err("could not allocate aux clk\n"); + return ERR_PTR(-ENOMEM); + } + + /* struct clk_aux assignments */ + if (!masks) + aux->masks = &default_aux_masks; + else + aux->masks = masks; + + aux->reg = reg; + aux->rtbl = rtbl; + aux->rtbl_cnt = rtbl_cnt; + aux->lock = lock; + aux->hw.init = &init; + + init.name = aux_name; + init.ops = &clk_aux_ops; + init.flags = flags; + init.parent_names = &parent_name; + init.num_parents = 1; + + clk = clk_register(NULL, &aux->hw); + if (IS_ERR_OR_NULL(clk)) + goto free_aux; + + if (gate_name) { + struct clk *tgate_clk; + + tgate_clk = clk_register_gate(NULL, gate_name, aux_name, 0, reg, + aux->masks->enable_bit, 0, lock); + if (IS_ERR_OR_NULL(tgate_clk)) + goto free_aux; + + if (gate_clk) + *gate_clk = tgate_clk; + } + + return clk; + +free_aux: + kfree(aux); + pr_err("clk register failed\n"); + + return NULL; +} diff --git a/drivers/clk/spear/clk.h b/drivers/clk/spear/clk.h index 9979b7f7e767..c2290800503a 100644 --- a/drivers/clk/spear/clk.h +++ b/drivers/clk/spear/clk.h @@ -16,6 +16,45 @@ #include #include +/* Auxiliary Synth clk */ +/* Default masks */ +#define AUX_EQ_SEL_SHIFT 30 +#define AUX_EQ_SEL_MASK 1 +#define AUX_EQ1_SEL 0 +#define AUX_EQ2_SEL 1 +#define AUX_XSCALE_SHIFT 16 +#define AUX_XSCALE_MASK 0xFFF +#define AUX_YSCALE_SHIFT 0 +#define AUX_YSCALE_MASK 0xFFF +#define AUX_SYNT_ENB 31 + +struct aux_clk_masks { + u32 eq_sel_mask; + u32 eq_sel_shift; + u32 eq1_mask; + u32 eq2_mask; + u32 xscale_sel_mask; + u32 xscale_sel_shift; + u32 yscale_sel_mask; + u32 yscale_sel_shift; + u32 enable_bit; +}; + +struct aux_rate_tbl { + u16 xscale; + u16 yscale; + u8 eq; +}; + +struct clk_aux { + struct clk_hw hw; + void __iomem *reg; + struct aux_clk_masks *masks; + struct aux_rate_tbl *rtbl; + u8 rtbl_cnt; + spinlock_t *lock; +}; + /* VCO-PLL clk */ struct pll_rate_tbl { u8 mode; @@ -44,6 +83,10 @@ typedef unsigned long (*clk_calc_rate)(struct clk_hw *hw, unsigned long prate, int index); /* clk register routines */ +struct clk *clk_register_aux(const char *aux_name, const char *gate_name, + const char *parent_name, unsigned long flags, void __iomem *reg, + struct aux_clk_masks *masks, struct aux_rate_tbl *rtbl, + u8 rtbl_cnt, spinlock_t *lock, struct clk **gate_clk); struct clk *clk_register_vco_pll(const char *vco_name, const char *pll_name, const char *vco_gate_name, const char *parent_name, unsigned long flags, void __iomem *mode_reg, void __iomem -- cgit v1.2.3 From 270b9f421e66ee5d135c99ba1c2b883c7750ab6c Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Wed, 11 Apr 2012 18:04:23 +0530 Subject: SPEAr: clk: Add Fractional Synthesizer clock All SPEAr SoC's contain Fractional Synthesizers. Their Fout is derived from following equations: Fout = Fin / (2 * div) (division factor) div is 17 bits:- 0-13 (fractional part) 14-16 (integer part) div is (16-14 bits).(13-0 bits) (in binary) Fout = Fin/(2 * div) Fout = ((Fin / 10000)/(2 * div)) * 10000 Fout = (2^14 * (Fin / 10000)/(2^14 * (2 * div))) * 10000 Fout = (((Fin / 10000) << 14)/(2 * (div << 14))) * 10000 div << 14 is simply 17 bit value written at register. This patch adds in support for this type of clock. Signed-off-by: Viresh Kumar Reviewed-by: Mike Turquette --- drivers/clk/spear/Makefile | 2 +- drivers/clk/spear/clk-frac-synth.c | 165 +++++++++++++++++++++++++++++++++++++ drivers/clk/spear/clk.h | 16 ++++ 3 files changed, 182 insertions(+), 1 deletion(-) create mode 100644 drivers/clk/spear/clk-frac-synth.c diff --git a/drivers/clk/spear/Makefile b/drivers/clk/spear/Makefile index e36d8c665724..182703622195 100644 --- a/drivers/clk/spear/Makefile +++ b/drivers/clk/spear/Makefile @@ -2,4 +2,4 @@ # SPEAr Clock specific Makefile # -obj-y += clk.o clk-aux-synth.o clk-vco-pll.o +obj-y += clk.o clk-aux-synth.o clk-frac-synth.o clk-vco-pll.o diff --git a/drivers/clk/spear/clk-frac-synth.c b/drivers/clk/spear/clk-frac-synth.c new file mode 100644 index 000000000000..4dbdb3fe18e0 --- /dev/null +++ b/drivers/clk/spear/clk-frac-synth.c @@ -0,0 +1,165 @@ +/* + * Copyright (C) 2012 ST Microelectronics + * Viresh Kumar + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + * + * Fractional Synthesizer clock implementation + */ + +#define pr_fmt(fmt) "clk-frac-synth: " fmt + +#include +#include +#include +#include +#include "clk.h" + +#define DIV_FACTOR_MASK 0x1FFFF + +/* + * DOC: Fractional Synthesizer clock + * + * Fout from synthesizer can be given from below equation: + * + * Fout= Fin/2*div (division factor) + * div is 17 bits:- + * 0-13 (fractional part) + * 14-16 (integer part) + * div is (16-14 bits).(13-0 bits) (in binary) + * + * Fout = Fin/(2 * div) + * Fout = ((Fin / 10000)/(2 * div)) * 10000 + * Fout = (2^14 * (Fin / 10000)/(2^14 * (2 * div))) * 10000 + * Fout = (((Fin / 10000) << 14)/(2 * (div << 14))) * 10000 + * + * div << 14 simply 17 bit value written at register. + * Max error due to scaling down by 10000 is 10 KHz + */ + +#define to_clk_frac(_hw) container_of(_hw, struct clk_frac, hw) + +static unsigned long frac_calc_rate(struct clk_hw *hw, unsigned long prate, + int index) +{ + struct clk_frac *frac = to_clk_frac(hw); + struct frac_rate_tbl *rtbl = frac->rtbl; + + prate /= 10000; + prate <<= 14; + prate /= (2 * rtbl[index].div); + prate *= 10000; + + return prate; +} + +static long clk_frac_round_rate(struct clk_hw *hw, unsigned long drate, + unsigned long *prate) +{ + struct clk_frac *frac = to_clk_frac(hw); + int unused; + + return clk_round_rate_index(hw, drate, *prate, frac_calc_rate, + frac->rtbl_cnt, &unused); +} + +static unsigned long clk_frac_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct clk_frac *frac = to_clk_frac(hw); + unsigned long flags = 0; + unsigned int div = 1, val; + + if (frac->lock) + spin_lock_irqsave(frac->lock, flags); + + val = readl_relaxed(frac->reg); + + if (frac->lock) + spin_unlock_irqrestore(frac->lock, flags); + + div = val & DIV_FACTOR_MASK; + + if (!div) + return 0; + + parent_rate = parent_rate / 10000; + + parent_rate = (parent_rate << 14) / (2 * div); + return parent_rate * 10000; +} + +/* Configures new clock rate of frac */ +static int clk_frac_set_rate(struct clk_hw *hw, unsigned long drate, + unsigned long prate) +{ + struct clk_frac *frac = to_clk_frac(hw); + struct frac_rate_tbl *rtbl = frac->rtbl; + unsigned long flags = 0, val; + int i; + + clk_round_rate_index(hw, drate, prate, frac_calc_rate, frac->rtbl_cnt, + &i); + + if (frac->lock) + spin_lock_irqsave(frac->lock, flags); + + val = readl_relaxed(frac->reg) & ~DIV_FACTOR_MASK; + val |= rtbl[i].div & DIV_FACTOR_MASK; + writel_relaxed(val, frac->reg); + + if (frac->lock) + spin_unlock_irqrestore(frac->lock, flags); + + return 0; +} + +struct clk_ops clk_frac_ops = { + .recalc_rate = clk_frac_recalc_rate, + .round_rate = clk_frac_round_rate, + .set_rate = clk_frac_set_rate, +}; + +struct clk *clk_register_frac(const char *name, const char *parent_name, + unsigned long flags, void __iomem *reg, + struct frac_rate_tbl *rtbl, u8 rtbl_cnt, spinlock_t *lock) +{ + struct clk_init_data init; + struct clk_frac *frac; + struct clk *clk; + + if (!name || !parent_name || !reg || !rtbl || !rtbl_cnt) { + pr_err("Invalid arguments passed"); + return ERR_PTR(-EINVAL); + } + + frac = kzalloc(sizeof(*frac), GFP_KERNEL); + if (!frac) { + pr_err("could not allocate frac clk\n"); + return ERR_PTR(-ENOMEM); + } + + /* struct clk_frac assignments */ + frac->reg = reg; + frac->rtbl = rtbl; + frac->rtbl_cnt = rtbl_cnt; + frac->lock = lock; + frac->hw.init = &init; + + init.name = name; + init.ops = &clk_frac_ops; + init.flags = flags; + init.parent_names = &parent_name; + init.num_parents = 1; + + clk = clk_register(NULL, &frac->hw); + if (!IS_ERR_OR_NULL(clk)) + return clk; + + pr_err("clk register failed\n"); + kfree(frac); + + return NULL; +} diff --git a/drivers/clk/spear/clk.h b/drivers/clk/spear/clk.h index c2290800503a..ac9030bbd6ce 100644 --- a/drivers/clk/spear/clk.h +++ b/drivers/clk/spear/clk.h @@ -55,6 +55,19 @@ struct clk_aux { spinlock_t *lock; }; +/* Fractional Synth clk */ +struct frac_rate_tbl { + u32 div; +}; + +struct clk_frac { + struct clk_hw hw; + void __iomem *reg; + struct frac_rate_tbl *rtbl; + u8 rtbl_cnt; + spinlock_t *lock; +}; + /* VCO-PLL clk */ struct pll_rate_tbl { u8 mode; @@ -87,6 +100,9 @@ struct clk *clk_register_aux(const char *aux_name, const char *gate_name, const char *parent_name, unsigned long flags, void __iomem *reg, struct aux_clk_masks *masks, struct aux_rate_tbl *rtbl, u8 rtbl_cnt, spinlock_t *lock, struct clk **gate_clk); +struct clk *clk_register_frac(const char *name, const char *parent_name, + unsigned long flags, void __iomem *reg, + struct frac_rate_tbl *rtbl, u8 rtbl_cnt, spinlock_t *lock); struct clk *clk_register_vco_pll(const char *vco_name, const char *pll_name, const char *vco_gate_name, const char *parent_name, unsigned long flags, void __iomem *mode_reg, void __iomem -- cgit v1.2.3 From a45896bd3a4b7beb571fa704efa7c2782b791093 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Wed, 11 Apr 2012 18:04:23 +0530 Subject: SPEAr: clk: Add General Purpose Timer Synthesizer clock All SPEAr SoC's contain GPT Synthesizers. Their Fout is derived from following equations: Fout= Fin/((2 ^ (N+1)) * (M+1)) This patch adds in support for this type of clock. Signed-off-by: Viresh Kumar Reviewed-by: Mike Turquette --- drivers/clk/spear/Makefile | 2 +- drivers/clk/spear/clk-gpt-synth.c | 154 ++++++++++++++++++++++++++++++++++++++ drivers/clk/spear/clk.h | 17 +++++ 3 files changed, 172 insertions(+), 1 deletion(-) create mode 100644 drivers/clk/spear/clk-gpt-synth.c diff --git a/drivers/clk/spear/Makefile b/drivers/clk/spear/Makefile index 182703622195..9e64824a8000 100644 --- a/drivers/clk/spear/Makefile +++ b/drivers/clk/spear/Makefile @@ -2,4 +2,4 @@ # SPEAr Clock specific Makefile # -obj-y += clk.o clk-aux-synth.o clk-frac-synth.o clk-vco-pll.o +obj-y += clk.o clk-aux-synth.o clk-frac-synth.o clk-gpt-synth.o clk-vco-pll.o diff --git a/drivers/clk/spear/clk-gpt-synth.c b/drivers/clk/spear/clk-gpt-synth.c new file mode 100644 index 000000000000..b471c9762a97 --- /dev/null +++ b/drivers/clk/spear/clk-gpt-synth.c @@ -0,0 +1,154 @@ +/* + * Copyright (C) 2012 ST Microelectronics + * Viresh Kumar + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + * + * General Purpose Timer Synthesizer clock implementation + */ + +#define pr_fmt(fmt) "clk-gpt-synth: " fmt + +#include +#include +#include +#include +#include "clk.h" + +#define GPT_MSCALE_MASK 0xFFF +#define GPT_NSCALE_SHIFT 12 +#define GPT_NSCALE_MASK 0xF + +/* + * DOC: General Purpose Timer Synthesizer clock + * + * Calculates gpt synth clk rate for different values of mscale and nscale + * + * Fout= Fin/((2 ^ (N+1)) * (M+1)) + */ + +#define to_clk_gpt(_hw) container_of(_hw, struct clk_gpt, hw) + +static unsigned long gpt_calc_rate(struct clk_hw *hw, unsigned long prate, + int index) +{ + struct clk_gpt *gpt = to_clk_gpt(hw); + struct gpt_rate_tbl *rtbl = gpt->rtbl; + + prate /= ((1 << (rtbl[index].nscale + 1)) * (rtbl[index].mscale + 1)); + + return prate; +} + +static long clk_gpt_round_rate(struct clk_hw *hw, unsigned long drate, + unsigned long *prate) +{ + struct clk_gpt *gpt = to_clk_gpt(hw); + int unused; + + return clk_round_rate_index(hw, drate, *prate, gpt_calc_rate, + gpt->rtbl_cnt, &unused); +} + +static unsigned long clk_gpt_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct clk_gpt *gpt = to_clk_gpt(hw); + unsigned long flags = 0; + unsigned int div = 1, val; + + if (gpt->lock) + spin_lock_irqsave(gpt->lock, flags); + + val = readl_relaxed(gpt->reg); + + if (gpt->lock) + spin_unlock_irqrestore(gpt->lock, flags); + + div += val & GPT_MSCALE_MASK; + div *= 1 << (((val >> GPT_NSCALE_SHIFT) & GPT_NSCALE_MASK) + 1); + + if (!div) + return 0; + + return parent_rate / div; +} + +/* Configures new clock rate of gpt */ +static int clk_gpt_set_rate(struct clk_hw *hw, unsigned long drate, + unsigned long prate) +{ + struct clk_gpt *gpt = to_clk_gpt(hw); + struct gpt_rate_tbl *rtbl = gpt->rtbl; + unsigned long flags = 0, val; + int i; + + clk_round_rate_index(hw, drate, prate, gpt_calc_rate, gpt->rtbl_cnt, + &i); + + if (gpt->lock) + spin_lock_irqsave(gpt->lock, flags); + + val = readl(gpt->reg) & ~GPT_MSCALE_MASK; + val &= ~(GPT_NSCALE_MASK << GPT_NSCALE_SHIFT); + + val |= rtbl[i].mscale & GPT_MSCALE_MASK; + val |= (rtbl[i].nscale & GPT_NSCALE_MASK) << GPT_NSCALE_SHIFT; + + writel_relaxed(val, gpt->reg); + + if (gpt->lock) + spin_unlock_irqrestore(gpt->lock, flags); + + return 0; +} + +static struct clk_ops clk_gpt_ops = { + .recalc_rate = clk_gpt_recalc_rate, + .round_rate = clk_gpt_round_rate, + .set_rate = clk_gpt_set_rate, +}; + +struct clk *clk_register_gpt(const char *name, const char *parent_name, unsigned + long flags, void __iomem *reg, struct gpt_rate_tbl *rtbl, u8 + rtbl_cnt, spinlock_t *lock) +{ + struct clk_init_data init; + struct clk_gpt *gpt; + struct clk *clk; + + if (!name || !parent_name || !reg || !rtbl || !rtbl_cnt) { + pr_err("Invalid arguments passed"); + return ERR_PTR(-EINVAL); + } + + gpt = kzalloc(sizeof(*gpt), GFP_KERNEL); + if (!gpt) { + pr_err("could not allocate gpt clk\n"); + return ERR_PTR(-ENOMEM); + } + + /* struct clk_gpt assignments */ + gpt->reg = reg; + gpt->rtbl = rtbl; + gpt->rtbl_cnt = rtbl_cnt; + gpt->lock = lock; + gpt->hw.init = &init; + + init.name = name; + init.ops = &clk_gpt_ops; + init.flags = flags; + init.parent_names = &parent_name; + init.num_parents = 1; + + clk = clk_register(NULL, &gpt->hw); + if (!IS_ERR_OR_NULL(clk)) + return clk; + + pr_err("clk register failed\n"); + kfree(gpt); + + return NULL; +} diff --git a/drivers/clk/spear/clk.h b/drivers/clk/spear/clk.h index ac9030bbd6ce..3321c46a071c 100644 --- a/drivers/clk/spear/clk.h +++ b/drivers/clk/spear/clk.h @@ -68,6 +68,20 @@ struct clk_frac { spinlock_t *lock; }; +/* GPT clk */ +struct gpt_rate_tbl { + u16 mscale; + u16 nscale; +}; + +struct clk_gpt { + struct clk_hw hw; + void __iomem *reg; + struct gpt_rate_tbl *rtbl; + u8 rtbl_cnt; + spinlock_t *lock; +}; + /* VCO-PLL clk */ struct pll_rate_tbl { u8 mode; @@ -103,6 +117,9 @@ struct clk *clk_register_aux(const char *aux_name, const char *gate_name, struct clk *clk_register_frac(const char *name, const char *parent_name, unsigned long flags, void __iomem *reg, struct frac_rate_tbl *rtbl, u8 rtbl_cnt, spinlock_t *lock); +struct clk *clk_register_gpt(const char *name, const char *parent_name, unsigned + long flags, void __iomem *reg, struct gpt_rate_tbl *rtbl, u8 + rtbl_cnt, spinlock_t *lock); struct clk *clk_register_vco_pll(const char *vco_name, const char *pll_name, const char *vco_gate_name, const char *parent_name, unsigned long flags, void __iomem *mode_reg, void __iomem -- cgit v1.2.3 From f8abc080d33e69dfa2c3dd0f84c31832e2679091 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Mon, 16 Apr 2012 13:56:18 +0530 Subject: SPEAr: Call clk_prepare() before calling clk_enable With common clock framework, it is must to call clk_{un}prepare() before/after clk_{dis}enable. This patch fixes this for SPEAr timer. Signed-off-by: Viresh Kumar Reviewed-by: Mike Turquette --- arch/arm/plat-spear/time.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/arm/plat-spear/time.c b/arch/arm/plat-spear/time.c index abb5bdecd509..1c94989d725f 100644 --- a/arch/arm/plat-spear/time.c +++ b/arch/arm/plat-spear/time.c @@ -219,10 +219,10 @@ void __init spear_setup_timer(void) goto err_iomap; } - ret = clk_enable(gpt_clk); + ret = clk_prepare_enable(gpt_clk); if (ret < 0) { - pr_err("%s:couldn't enable gpt clock\n", __func__); - goto err_clk; + pr_err("%s:couldn't prepare-enable gpt clock\n", __func__); + goto err_prepare_enable_clk; } spear_clockevent_init(); @@ -230,7 +230,7 @@ void __init spear_setup_timer(void) return; -err_clk: +err_prepare_enable_clk: clk_put(gpt_clk); err_iomap: iounmap(gpt_base); -- cgit v1.2.3 From 5df33a62c4a028d6fc7f2dcc159827d09b7334b8 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Tue, 10 Apr 2012 09:02:35 +0530 Subject: SPEAr: Switch to common clock framework SPEAr SoCs used its own clock framework since now. From now on they will move to use common clock framework. This patch updates existing SPEAr machine support to adapt for common clock framework. Signed-off-by: Viresh Kumar Reviewed-by: Mike Turquette Acked-by: Arnd Bergmann --- MAINTAINERS | 4 +- arch/arm/Kconfig | 1 + arch/arm/mach-spear3xx/Makefile | 2 +- arch/arm/mach-spear3xx/clock.c | 760 ----------------- arch/arm/mach-spear3xx/include/mach/generic.h | 3 +- arch/arm/mach-spear3xx/include/mach/misc_regs.h | 144 +--- arch/arm/mach-spear3xx/include/mach/spear.h | 13 + arch/arm/mach-spear3xx/spear320.c | 1 + arch/arm/mach-spear3xx/spear3xx.c | 2 + arch/arm/mach-spear6xx/Makefile | 2 +- arch/arm/mach-spear6xx/clock.c | 683 --------------- arch/arm/mach-spear6xx/include/mach/misc_regs.h | 154 +--- arch/arm/mach-spear6xx/spear6xx.c | 5 +- arch/arm/plat-spear/Makefile | 2 +- arch/arm/plat-spear/clock.c | 1005 ----------------------- arch/arm/plat-spear/include/plat/clock.h | 249 ------ drivers/clk/spear/Makefile | 3 + drivers/clk/spear/spear3xx_clock.c | 612 ++++++++++++++ drivers/clk/spear/spear6xx_clock.c | 342 ++++++++ 19 files changed, 983 insertions(+), 3004 deletions(-) delete mode 100644 arch/arm/mach-spear3xx/clock.c delete mode 100644 arch/arm/mach-spear6xx/clock.c delete mode 100644 arch/arm/plat-spear/clock.c delete mode 100644 arch/arm/plat-spear/include/plat/clock.h create mode 100644 drivers/clk/spear/spear3xx_clock.c create mode 100644 drivers/clk/spear/spear6xx_clock.c diff --git a/MAINTAINERS b/MAINTAINERS index 164e9a1df0f6..cb5425e3cd42 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -6336,9 +6336,7 @@ L: spear-devel@list.st.com L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) W: http://www.st.com/spear S: Maintained -F: arch/arm/mach-spear*/clock.c -F: arch/arm/plat-spear/clock.c -F: arch/arm/plat-spear/include/plat/clock.h +F: drivers/clk/spear/ SPEAR PAD MULTIPLEXING SUPPORT M: Viresh Kumar diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index cf006d40342c..ce030c242644 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -980,6 +980,7 @@ config PLAT_SPEAR select ARM_AMBA select ARCH_REQUIRE_GPIOLIB select CLKDEV_LOOKUP + select COMMON_CLK select CLKSRC_MMIO select GENERIC_CLOCKEVENTS select HAVE_CLK diff --git a/arch/arm/mach-spear3xx/Makefile b/arch/arm/mach-spear3xx/Makefile index b24862489704..5b30d0d10892 100644 --- a/arch/arm/mach-spear3xx/Makefile +++ b/arch/arm/mach-spear3xx/Makefile @@ -3,7 +3,7 @@ # # common files -obj-y += spear3xx.o clock.o +obj-y += spear3xx.o # spear300 specific files obj-$(CONFIG_MACH_SPEAR300) += spear300.o diff --git a/arch/arm/mach-spear3xx/clock.c b/arch/arm/mach-spear3xx/clock.c deleted file mode 100644 index 6c4841f55223..000000000000 --- a/arch/arm/mach-spear3xx/clock.c +++ /dev/null @@ -1,760 +0,0 @@ -/* - * arch/arm/mach-spear3xx/clock.c - * - * SPEAr3xx machines clock framework source file - * - * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include -#include -#include -#include -#include -#include - -/* root clks */ -/* 32 KHz oscillator clock */ -static struct clk osc_32k_clk = { - .flags = ALWAYS_ENABLED, - .rate = 32000, -}; - -/* 24 MHz oscillator clock */ -static struct clk osc_24m_clk = { - .flags = ALWAYS_ENABLED, - .rate = 24000000, -}; - -/* clock derived from 32 KHz osc clk */ -/* rtc clock */ -static struct clk rtc_clk = { - .pclk = &osc_32k_clk, - .en_reg = PERIP1_CLK_ENB, - .en_reg_bit = RTC_CLK_ENB, - .recalc = &follow_parent, -}; - -/* clock derived from 24 MHz osc clk */ -/* pll masks structure */ -static struct pll_clk_masks pll1_masks = { - .mode_mask = PLL_MODE_MASK, - .mode_shift = PLL_MODE_SHIFT, - .norm_fdbk_m_mask = PLL_NORM_FDBK_M_MASK, - .norm_fdbk_m_shift = PLL_NORM_FDBK_M_SHIFT, - .dith_fdbk_m_mask = PLL_DITH_FDBK_M_MASK, - .dith_fdbk_m_shift = PLL_DITH_FDBK_M_SHIFT, - .div_p_mask = PLL_DIV_P_MASK, - .div_p_shift = PLL_DIV_P_SHIFT, - .div_n_mask = PLL_DIV_N_MASK, - .div_n_shift = PLL_DIV_N_SHIFT, -}; - -/* pll1 configuration structure */ -static struct pll_clk_config pll1_config = { - .mode_reg = PLL1_CTR, - .cfg_reg = PLL1_FRQ, - .masks = &pll1_masks, -}; - -/* pll rate configuration table, in ascending order of rates */ -struct pll_rate_tbl pll_rtbl[] = { - {.mode = 0, .m = 0x85, .n = 0x0C, .p = 0x1}, /* 266 MHz */ - {.mode = 0, .m = 0xA6, .n = 0x0C, .p = 0x1}, /* 332 MHz */ -}; - -/* PLL1 clock */ -static struct clk pll1_clk = { - .flags = ENABLED_ON_INIT, - .pclk = &osc_24m_clk, - .en_reg = PLL1_CTR, - .en_reg_bit = PLL_ENABLE, - .calc_rate = &pll_calc_rate, - .recalc = &pll_clk_recalc, - .set_rate = &pll_clk_set_rate, - .rate_config = {pll_rtbl, ARRAY_SIZE(pll_rtbl), 1}, - .private_data = &pll1_config, -}; - -/* PLL3 48 MHz clock */ -static struct clk pll3_48m_clk = { - .flags = ALWAYS_ENABLED, - .pclk = &osc_24m_clk, - .rate = 48000000, -}; - -/* watch dog timer clock */ -static struct clk wdt_clk = { - .flags = ALWAYS_ENABLED, - .pclk = &osc_24m_clk, - .recalc = &follow_parent, -}; - -/* clock derived from pll1 clk */ -/* cpu clock */ -static struct clk cpu_clk = { - .flags = ALWAYS_ENABLED, - .pclk = &pll1_clk, - .recalc = &follow_parent, -}; - -/* ahb masks structure */ -static struct bus_clk_masks ahb_masks = { - .mask = PLL_HCLK_RATIO_MASK, - .shift = PLL_HCLK_RATIO_SHIFT, -}; - -/* ahb configuration structure */ -static struct bus_clk_config ahb_config = { - .reg = CORE_CLK_CFG, - .masks = &ahb_masks, -}; - -/* ahb rate configuration table, in ascending order of rates */ -struct bus_rate_tbl bus_rtbl[] = { - {.div = 3}, /* == parent divided by 4 */ - {.div = 2}, /* == parent divided by 3 */ - {.div = 1}, /* == parent divided by 2 */ - {.div = 0}, /* == parent divided by 1 */ -}; - -/* ahb clock */ -static struct clk ahb_clk = { - .flags = ALWAYS_ENABLED, - .pclk = &pll1_clk, - .calc_rate = &bus_calc_rate, - .recalc = &bus_clk_recalc, - .set_rate = &bus_clk_set_rate, - .rate_config = {bus_rtbl, ARRAY_SIZE(bus_rtbl), 2}, - .private_data = &ahb_config, -}; - -/* auxiliary synthesizers masks */ -static struct aux_clk_masks aux_masks = { - .eq_sel_mask = AUX_EQ_SEL_MASK, - .eq_sel_shift = AUX_EQ_SEL_SHIFT, - .eq1_mask = AUX_EQ1_SEL, - .eq2_mask = AUX_EQ2_SEL, - .xscale_sel_mask = AUX_XSCALE_MASK, - .xscale_sel_shift = AUX_XSCALE_SHIFT, - .yscale_sel_mask = AUX_YSCALE_MASK, - .yscale_sel_shift = AUX_YSCALE_SHIFT, -}; - -/* uart synth configurations */ -static struct aux_clk_config uart_synth_config = { - .synth_reg = UART_CLK_SYNT, - .masks = &aux_masks, -}; - -/* aux rate configuration table, in ascending order of rates */ -struct aux_rate_tbl aux_rtbl[] = { - /* For PLL1 = 332 MHz */ - {.xscale = 1, .yscale = 8, .eq = 1}, /* 41.5 MHz */ - {.xscale = 1, .yscale = 4, .eq = 1}, /* 83 MHz */ - {.xscale = 1, .yscale = 2, .eq = 1}, /* 166 MHz */ -}; - -/* uart synth clock */ -static struct clk uart_synth_clk = { - .en_reg = UART_CLK_SYNT, - .en_reg_bit = AUX_SYNT_ENB, - .pclk = &pll1_clk, - .calc_rate = &aux_calc_rate, - .recalc = &aux_clk_recalc, - .set_rate = &aux_clk_set_rate, - .rate_config = {aux_rtbl, ARRAY_SIZE(aux_rtbl), 1}, - .private_data = &uart_synth_config, -}; - -/* uart parents */ -static struct pclk_info uart_pclk_info[] = { - { - .pclk = &uart_synth_clk, - .pclk_val = AUX_CLK_PLL1_VAL, - }, { - .pclk = &pll3_48m_clk, - .pclk_val = AUX_CLK_PLL3_VAL, - }, -}; - -/* uart parent select structure */ -static struct pclk_sel uart_pclk_sel = { - .pclk_info = uart_pclk_info, - .pclk_count = ARRAY_SIZE(uart_pclk_info), - .pclk_sel_reg = PERIP_CLK_CFG, - .pclk_sel_mask = UART_CLK_MASK, -}; - -/* uart clock */ -static struct clk uart_clk = { - .en_reg = PERIP1_CLK_ENB, - .en_reg_bit = UART_CLK_ENB, - .pclk_sel = &uart_pclk_sel, - .pclk_sel_shift = UART_CLK_SHIFT, - .recalc = &follow_parent, -}; - -/* firda configurations */ -static struct aux_clk_config firda_synth_config = { - .synth_reg = FIRDA_CLK_SYNT, - .masks = &aux_masks, -}; - -/* firda synth clock */ -static struct clk firda_synth_clk = { - .en_reg = FIRDA_CLK_SYNT, - .en_reg_bit = AUX_SYNT_ENB, - .pclk = &pll1_clk, - .calc_rate = &aux_calc_rate, - .recalc = &aux_clk_recalc, - .set_rate = &aux_clk_set_rate, - .rate_config = {aux_rtbl, ARRAY_SIZE(aux_rtbl), 1}, - .private_data = &firda_synth_config, -}; - -/* firda parents */ -static struct pclk_info firda_pclk_info[] = { - { - .pclk = &firda_synth_clk, - .pclk_val = AUX_CLK_PLL1_VAL, - }, { - .pclk = &pll3_48m_clk, - .pclk_val = AUX_CLK_PLL3_VAL, - }, -}; - -/* firda parent select structure */ -static struct pclk_sel firda_pclk_sel = { - .pclk_info = firda_pclk_info, - .pclk_count = ARRAY_SIZE(firda_pclk_info), - .pclk_sel_reg = PERIP_CLK_CFG, - .pclk_sel_mask = FIRDA_CLK_MASK, -}; - -/* firda clock */ -static struct clk firda_clk = { - .en_reg = PERIP1_CLK_ENB, - .en_reg_bit = FIRDA_CLK_ENB, - .pclk_sel = &firda_pclk_sel, - .pclk_sel_shift = FIRDA_CLK_SHIFT, - .recalc = &follow_parent, -}; - -/* gpt synthesizer masks */ -static struct gpt_clk_masks gpt_masks = { - .mscale_sel_mask = GPT_MSCALE_MASK, - .mscale_sel_shift = GPT_MSCALE_SHIFT, - .nscale_sel_mask = GPT_NSCALE_MASK, - .nscale_sel_shift = GPT_NSCALE_SHIFT, -}; - -/* gpt rate configuration table, in ascending order of rates */ -struct gpt_rate_tbl gpt_rtbl[] = { - /* For pll1 = 332 MHz */ - {.mscale = 4, .nscale = 0}, /* 41.5 MHz */ - {.mscale = 2, .nscale = 0}, /* 55.3 MHz */ - {.mscale = 1, .nscale = 0}, /* 83 MHz */ -}; - -/* gpt0 synth clk config*/ -static struct gpt_clk_config gpt0_synth_config = { - .synth_reg = PRSC1_CLK_CFG, - .masks = &gpt_masks, -}; - -/* gpt synth clock */ -static struct clk gpt0_synth_clk = { - .flags = ALWAYS_ENABLED, - .pclk = &pll1_clk, - .calc_rate = &gpt_calc_rate, - .recalc = &gpt_clk_recalc, - .set_rate = &gpt_clk_set_rate, - .rate_config = {gpt_rtbl, ARRAY_SIZE(gpt_rtbl), 2}, - .private_data = &gpt0_synth_config, -}; - -/* gpt parents */ -static struct pclk_info gpt0_pclk_info[] = { - { - .pclk = &gpt0_synth_clk, - .pclk_val = AUX_CLK_PLL1_VAL, - }, { - .pclk = &pll3_48m_clk, - .pclk_val = AUX_CLK_PLL3_VAL, - }, -}; - -/* gpt parent select structure */ -static struct pclk_sel gpt0_pclk_sel = { - .pclk_info = gpt0_pclk_info, - .pclk_count = ARRAY_SIZE(gpt0_pclk_info), - .pclk_sel_reg = PERIP_CLK_CFG, - .pclk_sel_mask = GPT_CLK_MASK, -}; - -/* gpt0 timer clock */ -static struct clk gpt0_clk = { - .flags = ALWAYS_ENABLED, - .pclk_sel = &gpt0_pclk_sel, - .pclk_sel_shift = GPT0_CLK_SHIFT, - .recalc = &follow_parent, -}; - -/* gpt1 synth clk configurations */ -static struct gpt_clk_config gpt1_synth_config = { - .synth_reg = PRSC2_CLK_CFG, - .masks = &gpt_masks, -}; - -/* gpt1 synth clock */ -static struct clk gpt1_synth_clk = { - .flags = ALWAYS_ENABLED, - .pclk = &pll1_clk, - .calc_rate = &gpt_calc_rate, - .recalc = &gpt_clk_recalc, - .set_rate = &gpt_clk_set_rate, - .rate_config = {gpt_rtbl, ARRAY_SIZE(gpt_rtbl), 2}, - .private_data = &gpt1_synth_config, -}; - -static struct pclk_info gpt1_pclk_info[] = { - { - .pclk = &gpt1_synth_clk, - .pclk_val = AUX_CLK_PLL1_VAL, - }, { - .pclk = &pll3_48m_clk, - .pclk_val = AUX_CLK_PLL3_VAL, - }, -}; - -/* gpt parent select structure */ -static struct pclk_sel gpt1_pclk_sel = { - .pclk_info = gpt1_pclk_info, - .pclk_count = ARRAY_SIZE(gpt1_pclk_info), - .pclk_sel_reg = PERIP_CLK_CFG, - .pclk_sel_mask = GPT_CLK_MASK, -}; - -/* gpt1 timer clock */ -static struct clk gpt1_clk = { - .en_reg = PERIP1_CLK_ENB, - .en_reg_bit = GPT1_CLK_ENB, - .pclk_sel = &gpt1_pclk_sel, - .pclk_sel_shift = GPT1_CLK_SHIFT, - .recalc = &follow_parent, -}; - -/* gpt2 synth clk configurations */ -static struct gpt_clk_config gpt2_synth_config = { - .synth_reg = PRSC3_CLK_CFG, - .masks = &gpt_masks, -}; - -/* gpt1 synth clock */ -static struct clk gpt2_synth_clk = { - .flags = ALWAYS_ENABLED, - .pclk = &pll1_clk, - .calc_rate = &gpt_calc_rate, - .recalc = &gpt_clk_recalc, - .set_rate = &gpt_clk_set_rate, - .rate_config = {gpt_rtbl, ARRAY_SIZE(gpt_rtbl), 2}, - .private_data = &gpt2_synth_config, -}; - -static struct pclk_info gpt2_pclk_info[] = { - { - .pclk = &gpt2_synth_clk, - .pclk_val = AUX_CLK_PLL1_VAL, - }, { - .pclk = &pll3_48m_clk, - .pclk_val = AUX_CLK_PLL3_VAL, - }, -}; - -/* gpt parent select structure */ -static struct pclk_sel gpt2_pclk_sel = { - .pclk_info = gpt2_pclk_info, - .pclk_count = ARRAY_SIZE(gpt2_pclk_info), - .pclk_sel_reg = PERIP_CLK_CFG, - .pclk_sel_mask = GPT_CLK_MASK, -}; - -/* gpt2 timer clock */ -static struct clk gpt2_clk = { - .en_reg = PERIP1_CLK_ENB, - .en_reg_bit = GPT2_CLK_ENB, - .pclk_sel = &gpt2_pclk_sel, - .pclk_sel_shift = GPT2_CLK_SHIFT, - .recalc = &follow_parent, -}; - -/* clock derived from pll3 clk */ -/* usbh clock */ -static struct clk usbh_clk = { - .pclk = &pll3_48m_clk, - .en_reg = PERIP1_CLK_ENB, - .en_reg_bit = USBH_CLK_ENB, - .recalc = &follow_parent, -}; - -/* usbd clock */ -static struct clk usbd_clk = { - .pclk = &pll3_48m_clk, - .en_reg = PERIP1_CLK_ENB, - .en_reg_bit = USBD_CLK_ENB, - .recalc = &follow_parent, -}; - -/* clock derived from ahb clk */ -/* apb masks structure */ -static struct bus_clk_masks apb_masks = { - .mask = HCLK_PCLK_RATIO_MASK, - .shift = HCLK_PCLK_RATIO_SHIFT, -}; - -/* apb configuration structure */ -static struct bus_clk_config apb_config = { - .reg = CORE_CLK_CFG, - .masks = &apb_masks, -}; - -/* apb clock */ -static struct clk apb_clk = { - .flags = ALWAYS_ENABLED, - .pclk = &ahb_clk, - .calc_rate = &bus_calc_rate, - .recalc = &bus_clk_recalc, - .set_rate = &bus_clk_set_rate, - .rate_config = {bus_rtbl, ARRAY_SIZE(bus_rtbl), 2}, - .private_data = &apb_config, -}; - -/* i2c clock */ -static struct clk i2c_clk = { - .pclk = &ahb_clk, - .en_reg = PERIP1_CLK_ENB, - .en_reg_bit = I2C_CLK_ENB, - .recalc = &follow_parent, -}; - -/* dma clock */ -static struct clk dma_clk = { - .pclk = &ahb_clk, - .en_reg = PERIP1_CLK_ENB, - .en_reg_bit = DMA_CLK_ENB, - .recalc = &follow_parent, -}; - -/* jpeg clock */ -static struct clk jpeg_clk = { - .pclk = &ahb_clk, - .en_reg = PERIP1_CLK_ENB, - .en_reg_bit = JPEG_CLK_ENB, - .recalc = &follow_parent, -}; - -/* gmac clock */ -static struct clk gmac_clk = { - .pclk = &ahb_clk, - .en_reg = PERIP1_CLK_ENB, - .en_reg_bit = GMAC_CLK_ENB, - .recalc = &follow_parent, -}; - -/* smi clock */ -static struct clk smi_clk = { - .pclk = &ahb_clk, - .en_reg = PERIP1_CLK_ENB, - .en_reg_bit = SMI_CLK_ENB, - .recalc = &follow_parent, -}; - -/* c3 clock */ -static struct clk c3_clk = { - .pclk = &ahb_clk, - .en_reg = PERIP1_CLK_ENB, - .en_reg_bit = C3_CLK_ENB, - .recalc = &follow_parent, -}; - -/* clock derived from apb clk */ -/* adc clock */ -static struct clk adc_clk = { - .pclk = &apb_clk, - .en_reg = PERIP1_CLK_ENB, - .en_reg_bit = ADC_CLK_ENB, - .recalc = &follow_parent, -}; - -#if defined(CONFIG_MACH_SPEAR310) || defined(CONFIG_MACH_SPEAR320) -/* emi clock */ -static struct clk emi_clk = { - .flags = ALWAYS_ENABLED, - .pclk = &ahb_clk, - .recalc = &follow_parent, -}; -#endif - -/* ssp clock */ -static struct clk ssp0_clk = { - .pclk = &apb_clk, - .en_reg = PERIP1_CLK_ENB, - .en_reg_bit = SSP_CLK_ENB, - .recalc = &follow_parent, -}; - -/* gpio clock */ -static struct clk gpio_clk = { - .pclk = &apb_clk, - .en_reg = PERIP1_CLK_ENB, - .en_reg_bit = GPIO_CLK_ENB, - .recalc = &follow_parent, -}; - -static struct clk dummy_apb_pclk; - -#if defined(CONFIG_MACH_SPEAR300) || defined(CONFIG_MACH_SPEAR310) || \ - defined(CONFIG_MACH_SPEAR320) -/* fsmc clock */ -static struct clk fsmc_clk = { - .flags = ALWAYS_ENABLED, - .pclk = &ahb_clk, - .recalc = &follow_parent, -}; -#endif - -/* common clocks to spear310 and spear320 */ -#if defined(CONFIG_MACH_SPEAR310) || defined(CONFIG_MACH_SPEAR320) -/* uart1 clock */ -static struct clk uart1_clk = { - .flags = ALWAYS_ENABLED, - .pclk = &apb_clk, - .recalc = &follow_parent, -}; - -/* uart2 clock */ -static struct clk uart2_clk = { - .flags = ALWAYS_ENABLED, - .pclk = &apb_clk, - .recalc = &follow_parent, -}; -#endif /* CONFIG_MACH_SPEAR310 || CONFIG_MACH_SPEAR320 */ - -/* common clocks to spear300 and spear320 */ -#if defined(CONFIG_MACH_SPEAR300) || defined(CONFIG_MACH_SPEAR320) -/* clcd clock */ -static struct clk clcd_clk = { - .flags = ALWAYS_ENABLED, - .pclk = &pll3_48m_clk, - .recalc = &follow_parent, -}; - -/* sdhci clock */ -static struct clk sdhci_clk = { - .flags = ALWAYS_ENABLED, - .pclk = &ahb_clk, - .recalc = &follow_parent, -}; -#endif /* CONFIG_MACH_SPEAR300 || CONFIG_MACH_SPEAR320 */ - -/* spear300 machine specific clock structures */ -#ifdef CONFIG_MACH_SPEAR300 -/* gpio1 clock */ -static struct clk gpio1_clk = { - .flags = ALWAYS_ENABLED, - .pclk = &apb_clk, - .recalc = &follow_parent, -}; - -/* keyboard clock */ -static struct clk kbd_clk = { - .flags = ALWAYS_ENABLED, - .pclk = &apb_clk, - .recalc = &follow_parent, -}; - -#endif - -/* spear310 machine specific clock structures */ -#ifdef CONFIG_MACH_SPEAR310 -/* uart3 clock */ -static struct clk uart3_clk = { - .flags = ALWAYS_ENABLED, - .pclk = &apb_clk, - .recalc = &follow_parent, -}; - -/* uart4 clock */ -static struct clk uart4_clk = { - .flags = ALWAYS_ENABLED, - .pclk = &apb_clk, - .recalc = &follow_parent, -}; - -/* uart5 clock */ -static struct clk uart5_clk = { - .flags = ALWAYS_ENABLED, - .pclk = &apb_clk, - .recalc = &follow_parent, -}; -#endif - -/* spear320 machine specific clock structures */ -#ifdef CONFIG_MACH_SPEAR320 -/* can0 clock */ -static struct clk can0_clk = { - .flags = ALWAYS_ENABLED, - .pclk = &apb_clk, - .recalc = &follow_parent, -}; - -/* can1 clock */ -static struct clk can1_clk = { - .flags = ALWAYS_ENABLED, - .pclk = &apb_clk, - .recalc = &follow_parent, -}; - -/* i2c1 clock */ -static struct clk i2c1_clk = { - .flags = ALWAYS_ENABLED, - .pclk = &ahb_clk, - .recalc = &follow_parent, -}; - -/* ssp1 clock */ -static struct clk ssp1_clk = { - .flags = ALWAYS_ENABLED, - .pclk = &apb_clk, - .recalc = &follow_parent, -}; - -/* ssp2 clock */ -static struct clk ssp2_clk = { - .flags = ALWAYS_ENABLED, - .pclk = &apb_clk, - .recalc = &follow_parent, -}; - -/* pwm clock */ -static struct clk pwm_clk = { - .flags = ALWAYS_ENABLED, - .pclk = &apb_clk, - .recalc = &follow_parent, -}; -#endif - -/* array of all spear 3xx clock lookups */ -static struct clk_lookup spear_clk_lookups[] = { - { .con_id = "apb_pclk", .clk = &dummy_apb_pclk}, - /* root clks */ - { .con_id = "osc_32k_clk", .clk = &osc_32k_clk}, - { .con_id = "osc_24m_clk", .clk = &osc_24m_clk}, - /* clock derived from 32 KHz osc clk */ - { .dev_id = "rtc-spear", .clk = &rtc_clk}, - /* clock derived from 24 MHz osc clk */ - { .con_id = "pll1_clk", .clk = &pll1_clk}, - { .con_id = "pll3_48m_clk", .clk = &pll3_48m_clk}, - { .dev_id = "wdt", .clk = &wdt_clk}, - /* clock derived from pll1 clk */ - { .con_id = "cpu_clk", .clk = &cpu_clk}, - { .con_id = "ahb_clk", .clk = &ahb_clk}, - { .con_id = "uart_synth_clk", .clk = &uart_synth_clk}, - { .con_id = "firda_synth_clk", .clk = &firda_synth_clk}, - { .con_id = "gpt0_synth_clk", .clk = &gpt0_synth_clk}, - { .con_id = "gpt1_synth_clk", .clk = &gpt1_synth_clk}, - { .con_id = "gpt2_synth_clk", .clk = &gpt2_synth_clk}, - { .dev_id = "uart", .clk = &uart_clk}, - { .dev_id = "firda", .clk = &firda_clk}, - { .dev_id = "gpt0", .clk = &gpt0_clk}, - { .dev_id = "gpt1", .clk = &gpt1_clk}, - { .dev_id = "gpt2", .clk = &gpt2_clk}, - /* clock derived from pll3 clk */ - { .dev_id = "designware_udc", .clk = &usbd_clk}, - { .con_id = "usbh_clk", .clk = &usbh_clk}, - /* clock derived from ahb clk */ - { .con_id = "apb_clk", .clk = &apb_clk}, - { .dev_id = "i2c_designware.0", .clk = &i2c_clk}, - { .dev_id = "dma", .clk = &dma_clk}, - { .dev_id = "jpeg", .clk = &jpeg_clk}, - { .dev_id = "gmac", .clk = &gmac_clk}, - { .dev_id = "smi", .clk = &smi_clk}, - { .dev_id = "c3", .clk = &c3_clk}, - /* clock derived from apb clk */ - { .dev_id = "adc", .clk = &adc_clk}, - { .dev_id = "ssp-pl022.0", .clk = &ssp0_clk}, - { .dev_id = "gpio", .clk = &gpio_clk}, -}; - -/* array of all spear 300 clock lookups */ -#ifdef CONFIG_MACH_SPEAR300 -static struct clk_lookup spear300_clk_lookups[] = { - { .dev_id = "clcd", .clk = &clcd_clk}, - { .con_id = "fsmc", .clk = &fsmc_clk}, - { .dev_id = "gpio1", .clk = &gpio1_clk}, - { .dev_id = "keyboard", .clk = &kbd_clk}, - { .dev_id = "sdhci", .clk = &sdhci_clk}, -}; -#endif - -/* array of all spear 310 clock lookups */ -#ifdef CONFIG_MACH_SPEAR310 -static struct clk_lookup spear310_clk_lookups[] = { - { .con_id = "fsmc", .clk = &fsmc_clk}, - { .con_id = "emi", .clk = &emi_clk}, - { .dev_id = "uart1", .clk = &uart1_clk}, - { .dev_id = "uart2", .clk = &uart2_clk}, - { .dev_id = "uart3", .clk = &uart3_clk}, - { .dev_id = "uart4", .clk = &uart4_clk}, - { .dev_id = "uart5", .clk = &uart5_clk}, -}; -#endif - -/* array of all spear 320 clock lookups */ -#ifdef CONFIG_MACH_SPEAR320 -static struct clk_lookup spear320_clk_lookups[] = { - { .dev_id = "clcd", .clk = &clcd_clk}, - { .con_id = "fsmc", .clk = &fsmc_clk}, - { .dev_id = "i2c_designware.1", .clk = &i2c1_clk}, - { .con_id = "emi", .clk = &emi_clk}, - { .dev_id = "pwm", .clk = &pwm_clk}, - { .dev_id = "sdhci", .clk = &sdhci_clk}, - { .dev_id = "c_can_platform.0", .clk = &can0_clk}, - { .dev_id = "c_can_platform.1", .clk = &can1_clk}, - { .dev_id = "ssp-pl022.1", .clk = &ssp1_clk}, - { .dev_id = "ssp-pl022.2", .clk = &ssp2_clk}, - { .dev_id = "uart1", .clk = &uart1_clk}, - { .dev_id = "uart2", .clk = &uart2_clk}, -}; -#endif - -void __init spear3xx_clk_init(void) -{ - int i, cnt; - struct clk_lookup *lookups; - - if (machine_is_spear300()) { - cnt = ARRAY_SIZE(spear300_clk_lookups); - lookups = spear300_clk_lookups; - } else if (machine_is_spear310()) { - cnt = ARRAY_SIZE(spear310_clk_lookups); - lookups = spear310_clk_lookups; - } else { - cnt = ARRAY_SIZE(spear320_clk_lookups); - lookups = spear320_clk_lookups; - } - - for (i = 0; i < ARRAY_SIZE(spear_clk_lookups); i++) - clk_register(&spear_clk_lookups[i]); - - for (i = 0; i < cnt; i++) - clk_register(&lookups[i]); - - clk_init(); -} diff --git a/arch/arm/mach-spear3xx/include/mach/generic.h b/arch/arm/mach-spear3xx/include/mach/generic.h index 14276e5a98d2..15c107aad202 100644 --- a/arch/arm/mach-spear3xx/include/mach/generic.h +++ b/arch/arm/mach-spear3xx/include/mach/generic.h @@ -36,8 +36,8 @@ extern struct amba_device spear3xx_uart_device; extern struct sys_timer spear3xx_timer; /* Add spear3xx family function declarations here */ -void __init spear3xx_clk_init(void); void __init spear_setup_timer(void); +void __init spear3xx_clk_init(void); void __init spear3xx_map_io(void); void __init spear3xx_init_irq(void); void __init spear3xx_init(void); @@ -156,7 +156,6 @@ extern struct pmx_dev spear310_pmx_tdm0; /* Add spear310 machine function declarations here */ void __init spear310_init(struct pmx_mode *pmx_mode, struct pmx_dev **pmx_devs, u8 pmx_dev_count); - #endif /* CONFIG_MACH_SPEAR310 */ /* spear320 declarations */ diff --git a/arch/arm/mach-spear3xx/include/mach/misc_regs.h b/arch/arm/mach-spear3xx/include/mach/misc_regs.h index 5bd8cd8d4852..50cfe0d1a7c4 100644 --- a/arch/arm/mach-spear3xx/include/mach/misc_regs.h +++ b/arch/arm/mach-spear3xx/include/mach/misc_regs.h @@ -15,150 +15,8 @@ #define __MACH_MISC_REGS_H #include +#include #define MISC_BASE IOMEM(VA_SPEAR3XX_ICM3_MISC_REG_BASE) -#define SOC_CFG_CTR (MISC_BASE + 0x000) -#define DIAG_CFG_CTR (MISC_BASE + 0x004) -#define PLL1_CTR (MISC_BASE + 0x008) -#define PLL1_FRQ (MISC_BASE + 0x00C) -#define PLL1_MOD (MISC_BASE + 0x010) -#define PLL2_CTR (MISC_BASE + 0x014) -/* PLL_CTR register masks */ -#define PLL_ENABLE 2 -#define PLL_MODE_SHIFT 4 -#define PLL_MODE_MASK 0x3 -#define PLL_MODE_NORMAL 0 -#define PLL_MODE_FRACTION 1 -#define PLL_MODE_DITH_DSB 2 -#define PLL_MODE_DITH_SSB 3 - -#define PLL2_FRQ (MISC_BASE + 0x018) -/* PLL FRQ register masks */ -#define PLL_DIV_N_SHIFT 0 -#define PLL_DIV_N_MASK 0xFF -#define PLL_DIV_P_SHIFT 8 -#define PLL_DIV_P_MASK 0x7 -#define PLL_NORM_FDBK_M_SHIFT 24 -#define PLL_NORM_FDBK_M_MASK 0xFF -#define PLL_DITH_FDBK_M_SHIFT 16 -#define PLL_DITH_FDBK_M_MASK 0xFFFF - -#define PLL2_MOD (MISC_BASE + 0x01C) -#define PLL_CLK_CFG (MISC_BASE + 0x020) -#define CORE_CLK_CFG (MISC_BASE + 0x024) -/* CORE CLK CFG register masks */ -#define PLL_HCLK_RATIO_SHIFT 10 -#define PLL_HCLK_RATIO_MASK 0x3 -#define HCLK_PCLK_RATIO_SHIFT 8 -#define HCLK_PCLK_RATIO_MASK 0x3 - -#define PERIP_CLK_CFG (MISC_BASE + 0x028) -/* PERIP_CLK_CFG register masks */ -#define UART_CLK_SHIFT 4 -#define UART_CLK_MASK 0x1 -#define FIRDA_CLK_SHIFT 5 -#define FIRDA_CLK_MASK 0x3 -#define GPT0_CLK_SHIFT 8 -#define GPT1_CLK_SHIFT 11 -#define GPT2_CLK_SHIFT 12 -#define GPT_CLK_MASK 0x1 -#define AUX_CLK_PLL3_VAL 0 -#define AUX_CLK_PLL1_VAL 1 - -#define PERIP1_CLK_ENB (MISC_BASE + 0x02C) -/* PERIP1_CLK_ENB register masks */ -#define UART_CLK_ENB 3 -#define SSP_CLK_ENB 5 -#define I2C_CLK_ENB 7 -#define JPEG_CLK_ENB 8 -#define FIRDA_CLK_ENB 10 -#define GPT1_CLK_ENB 11 -#define GPT2_CLK_ENB 12 -#define ADC_CLK_ENB 15 -#define RTC_CLK_ENB 17 -#define GPIO_CLK_ENB 18 -#define DMA_CLK_ENB 19 -#define SMI_CLK_ENB 21 -#define GMAC_CLK_ENB 23 -#define USBD_CLK_ENB 24 -#define USBH_CLK_ENB 25 -#define C3_CLK_ENB 31 - -#define SOC_CORE_ID (MISC_BASE + 0x030) -#define RAS_CLK_ENB (MISC_BASE + 0x034) -#define PERIP1_SOF_RST (MISC_BASE + 0x038) -/* PERIP1_SOF_RST register masks */ -#define JPEG_SOF_RST 8 - -#define SOC_USER_ID (MISC_BASE + 0x03C) -#define RAS_SOF_RST (MISC_BASE + 0x040) -#define PRSC1_CLK_CFG (MISC_BASE + 0x044) -#define PRSC2_CLK_CFG (MISC_BASE + 0x048) -#define PRSC3_CLK_CFG (MISC_BASE + 0x04C) -/* gpt synthesizer register masks */ -#define GPT_MSCALE_SHIFT 0 -#define GPT_MSCALE_MASK 0xFFF -#define GPT_NSCALE_SHIFT 12 -#define GPT_NSCALE_MASK 0xF - -#define AMEM_CLK_CFG (MISC_BASE + 0x050) -#define EXPI_CLK_CFG (MISC_BASE + 0x054) -#define CLCD_CLK_SYNT (MISC_BASE + 0x05C) -#define FIRDA_CLK_SYNT (MISC_BASE + 0x060) -#define UART_CLK_SYNT (MISC_BASE + 0x064) -#define GMAC_CLK_SYNT (MISC_BASE + 0x068) -#define RAS1_CLK_SYNT (MISC_BASE + 0x06C) -#define RAS2_CLK_SYNT (MISC_BASE + 0x070) -#define RAS3_CLK_SYNT (MISC_BASE + 0x074) -#define RAS4_CLK_SYNT (MISC_BASE + 0x078) -/* aux clk synthesiser register masks for irda to ras4 */ -#define AUX_SYNT_ENB 31 -#define AUX_EQ_SEL_SHIFT 30 -#define AUX_EQ_SEL_MASK 1 -#define AUX_EQ1_SEL 0 -#define AUX_EQ2_SEL 1 -#define AUX_XSCALE_SHIFT 16 -#define AUX_XSCALE_MASK 0xFFF -#define AUX_YSCALE_SHIFT 0 -#define AUX_YSCALE_MASK 0xFFF - -#define ICM1_ARB_CFG (MISC_BASE + 0x07C) -#define ICM2_ARB_CFG (MISC_BASE + 0x080) -#define ICM3_ARB_CFG (MISC_BASE + 0x084) -#define ICM4_ARB_CFG (MISC_BASE + 0x088) -#define ICM5_ARB_CFG (MISC_BASE + 0x08C) -#define ICM6_ARB_CFG (MISC_BASE + 0x090) -#define ICM7_ARB_CFG (MISC_BASE + 0x094) -#define ICM8_ARB_CFG (MISC_BASE + 0x098) -#define ICM9_ARB_CFG (MISC_BASE + 0x09C) -#define DMA_CHN_CFG (MISC_BASE + 0x0A0) -#define USB2_PHY_CFG (MISC_BASE + 0x0A4) -#define GMAC_CFG_CTR (MISC_BASE + 0x0A8) -#define EXPI_CFG_CTR (MISC_BASE + 0x0AC) -#define PRC1_LOCK_CTR (MISC_BASE + 0x0C0) -#define PRC2_LOCK_CTR (MISC_BASE + 0x0C4) -#define PRC3_LOCK_CTR (MISC_BASE + 0x0C8) -#define PRC4_LOCK_CTR (MISC_BASE + 0x0CC) -#define PRC1_IRQ_CTR (MISC_BASE + 0x0D0) -#define PRC2_IRQ_CTR (MISC_BASE + 0x0D4) -#define PRC3_IRQ_CTR (MISC_BASE + 0x0D8) -#define PRC4_IRQ_CTR (MISC_BASE + 0x0DC) -#define PWRDOWN_CFG_CTR (MISC_BASE + 0x0E0) -#define COMPSSTL_1V8_CFG (MISC_BASE + 0x0E4) -#define COMPSSTL_2V5_CFG (MISC_BASE + 0x0E8) -#define COMPCOR_3V3_CFG (MISC_BASE + 0x0EC) -#define SSTLPAD_CFG_CTR (MISC_BASE + 0x0F0) -#define BIST1_CFG_CTR (MISC_BASE + 0x0F4) -#define BIST2_CFG_CTR (MISC_BASE + 0x0F8) -#define BIST3_CFG_CTR (MISC_BASE + 0x0FC) -#define BIST4_CFG_CTR (MISC_BASE + 0x100) -#define BIST5_CFG_CTR (MISC_BASE + 0x104) -#define BIST1_STS_RES (MISC_BASE + 0x108) -#define BIST2_STS_RES (MISC_BASE + 0x10C) -#define BIST3_STS_RES (MISC_BASE + 0x110) -#define BIST4_STS_RES (MISC_BASE + 0x114) -#define BIST5_STS_RES (MISC_BASE + 0x118) -#define SYSERR_CFG_CTR (MISC_BASE + 0x11C) - #endif /* __MACH_MISC_REGS_H */ diff --git a/arch/arm/mach-spear3xx/include/mach/spear.h b/arch/arm/mach-spear3xx/include/mach/spear.h index 63fd98356919..881109522060 100644 --- a/arch/arm/mach-spear3xx/include/mach/spear.h +++ b/arch/arm/mach-spear3xx/include/mach/spear.h @@ -78,4 +78,17 @@ #define SPEAR_SYS_CTRL_BASE SPEAR3XX_ICM3_SYS_CTRL_BASE #define VA_SPEAR_SYS_CTRL_BASE VA_SPEAR3XX_ICM3_SYS_CTRL_BASE +/* SPEAr320 Macros */ +#define SPEAR320_SOC_CONFIG_BASE UL(0xB3000000) +#define VA_SPEAR320_SOC_CONFIG_BASE UL(0xFE000000) +#define SPEAR320_CONTROL_REG IOMEM(VA_SPEAR320_SOC_CONFIG_BASE) +#define SPEAR320_EXT_CTRL_REG IOMEM(VA_SPEAR320_SOC_CONFIG_BASE + 0x0018) + #define SPEAR320_UARTX_PCLK_MASK 0x1 + #define SPEAR320_UART2_PCLK_SHIFT 8 + #define SPEAR320_UART3_PCLK_SHIFT 9 + #define SPEAR320_UART4_PCLK_SHIFT 10 + #define SPEAR320_UART5_PCLK_SHIFT 11 + #define SPEAR320_UART6_PCLK_SHIFT 12 + #define SPEAR320_RS485_PCLK_SHIFT 13 + #endif /* __MACH_SPEAR3XX_H */ diff --git a/arch/arm/mach-spear3xx/spear320.c b/arch/arm/mach-spear3xx/spear320.c index deaaf199612c..bfdad554319c 100644 --- a/arch/arm/mach-spear3xx/spear320.c +++ b/arch/arm/mach-spear3xx/spear320.c @@ -16,6 +16,7 @@ #include #include #include +#include /* pad multiplexing support */ /* muxing registers */ diff --git a/arch/arm/mach-spear3xx/spear3xx.c b/arch/arm/mach-spear3xx/spear3xx.c index b1733c37f209..2625ab9a6c8b 100644 --- a/arch/arm/mach-spear3xx/spear3xx.c +++ b/arch/arm/mach-spear3xx/spear3xx.c @@ -511,6 +511,8 @@ static void __init spear3xx_timer_init(void) char pclk_name[] = "pll3_48m_clk"; struct clk *gpt_clk, *pclk; + spear3xx_clk_init(); + /* get the system timer clock */ gpt_clk = clk_get_sys("gpt0", NULL); if (IS_ERR(gpt_clk)) { diff --git a/arch/arm/mach-spear6xx/Makefile b/arch/arm/mach-spear6xx/Makefile index 76e5750552fc..898831d93f37 100644 --- a/arch/arm/mach-spear6xx/Makefile +++ b/arch/arm/mach-spear6xx/Makefile @@ -3,4 +3,4 @@ # # common files -obj-y += clock.o spear6xx.o +obj-y += spear6xx.o diff --git a/arch/arm/mach-spear6xx/clock.c b/arch/arm/mach-spear6xx/clock.c deleted file mode 100644 index a86499a8a15f..000000000000 --- a/arch/arm/mach-spear6xx/clock.c +++ /dev/null @@ -1,683 +0,0 @@ -/* - * arch/arm/mach-spear6xx/clock.c - * - * SPEAr6xx machines clock framework source file - * - * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include -#include -#include -#include -#include - -/* root clks */ -/* 32 KHz oscillator clock */ -static struct clk osc_32k_clk = { - .flags = ALWAYS_ENABLED, - .rate = 32000, -}; - -/* 30 MHz oscillator clock */ -static struct clk osc_30m_clk = { - .flags = ALWAYS_ENABLED, - .rate = 30000000, -}; - -/* clock derived from 32 KHz osc clk */ -/* rtc clock */ -static struct clk rtc_clk = { - .pclk = &osc_32k_clk, - .en_reg = PERIP1_CLK_ENB, - .en_reg_bit = RTC_CLK_ENB, - .recalc = &follow_parent, -}; - -/* clock derived from 30 MHz osc clk */ -/* pll masks structure */ -static struct pll_clk_masks pll1_masks = { - .mode_mask = PLL_MODE_MASK, - .mode_shift = PLL_MODE_SHIFT, - .norm_fdbk_m_mask = PLL_NORM_FDBK_M_MASK, - .norm_fdbk_m_shift = PLL_NORM_FDBK_M_SHIFT, - .dith_fdbk_m_mask = PLL_DITH_FDBK_M_MASK, - .dith_fdbk_m_shift = PLL_DITH_FDBK_M_SHIFT, - .div_p_mask = PLL_DIV_P_MASK, - .div_p_shift = PLL_DIV_P_SHIFT, - .div_n_mask = PLL_DIV_N_MASK, - .div_n_shift = PLL_DIV_N_SHIFT, -}; - -/* pll1 configuration structure */ -static struct pll_clk_config pll1_config = { - .mode_reg = PLL1_CTR, - .cfg_reg = PLL1_FRQ, - .masks = &pll1_masks, -}; - -/* pll rate configuration table, in ascending order of rates */ -struct pll_rate_tbl pll_rtbl[] = { - {.mode = 0, .m = 0x85, .n = 0x0C, .p = 0x1}, /* 266 MHz */ - {.mode = 0, .m = 0xA6, .n = 0x0C, .p = 0x1}, /* 332 MHz */ -}; - -/* PLL1 clock */ -static struct clk pll1_clk = { - .flags = ENABLED_ON_INIT, - .pclk = &osc_30m_clk, - .en_reg = PLL1_CTR, - .en_reg_bit = PLL_ENABLE, - .calc_rate = &pll_calc_rate, - .recalc = &pll_clk_recalc, - .set_rate = &pll_clk_set_rate, - .rate_config = {pll_rtbl, ARRAY_SIZE(pll_rtbl), 1}, - .private_data = &pll1_config, -}; - -/* PLL3 48 MHz clock */ -static struct clk pll3_48m_clk = { - .flags = ALWAYS_ENABLED, - .pclk = &osc_30m_clk, - .rate = 48000000, -}; - -/* watch dog timer clock */ -static struct clk wdt_clk = { - .flags = ALWAYS_ENABLED, - .pclk = &osc_30m_clk, - .recalc = &follow_parent, -}; - -/* clock derived from pll1 clk */ -/* cpu clock */ -static struct clk cpu_clk = { - .flags = ALWAYS_ENABLED, - .pclk = &pll1_clk, - .recalc = &follow_parent, -}; - -/* ahb masks structure */ -static struct bus_clk_masks ahb_masks = { - .mask = PLL_HCLK_RATIO_MASK, - .shift = PLL_HCLK_RATIO_SHIFT, -}; - -/* ahb configuration structure */ -static struct bus_clk_config ahb_config = { - .reg = CORE_CLK_CFG, - .masks = &ahb_masks, -}; - -/* ahb rate configuration table, in ascending order of rates */ -struct bus_rate_tbl bus_rtbl[] = { - {.div = 3}, /* == parent divided by 4 */ - {.div = 2}, /* == parent divided by 3 */ - {.div = 1}, /* == parent divided by 2 */ - {.div = 0}, /* == parent divided by 1 */ -}; - -/* ahb clock */ -static struct clk ahb_clk = { - .flags = ALWAYS_ENABLED, - .pclk = &pll1_clk, - .calc_rate = &bus_calc_rate, - .recalc = &bus_clk_recalc, - .set_rate = &bus_clk_set_rate, - .rate_config = {bus_rtbl, ARRAY_SIZE(bus_rtbl), 2}, - .private_data = &ahb_config, -}; - -/* auxiliary synthesizers masks */ -static struct aux_clk_masks aux_masks = { - .eq_sel_mask = AUX_EQ_SEL_MASK, - .eq_sel_shift = AUX_EQ_SEL_SHIFT, - .eq1_mask = AUX_EQ1_SEL, - .eq2_mask = AUX_EQ2_SEL, - .xscale_sel_mask = AUX_XSCALE_MASK, - .xscale_sel_shift = AUX_XSCALE_SHIFT, - .yscale_sel_mask = AUX_YSCALE_MASK, - .yscale_sel_shift = AUX_YSCALE_SHIFT, -}; - -/* uart configurations */ -static struct aux_clk_config uart_synth_config = { - .synth_reg = UART_CLK_SYNT, - .masks = &aux_masks, -}; - -/* aux rate configuration table, in ascending order of rates */ -struct aux_rate_tbl aux_rtbl[] = { - /* For PLL1 = 332 MHz */ - {.xscale = 1, .yscale = 8, .eq = 1}, /* 41.5 MHz */ - {.xscale = 1, .yscale = 4, .eq = 1}, /* 83 MHz */ - {.xscale = 1, .yscale = 2, .eq = 1}, /* 166 MHz */ -}; - -/* uart synth clock */ -static struct clk uart_synth_clk = { - .en_reg = UART_CLK_SYNT, - .en_reg_bit = AUX_SYNT_ENB, - .pclk = &pll1_clk, - .calc_rate = &aux_calc_rate, - .recalc = &aux_clk_recalc, - .set_rate = &aux_clk_set_rate, - .rate_config = {aux_rtbl, ARRAY_SIZE(aux_rtbl), 2}, - .private_data = &uart_synth_config, -}; - -/* uart parents */ -static struct pclk_info uart_pclk_info[] = { - { - .pclk = &uart_synth_clk, - .pclk_val = AUX_CLK_PLL1_VAL, - }, { - .pclk = &pll3_48m_clk, - .pclk_val = AUX_CLK_PLL3_VAL, - }, -}; - -/* uart parent select structure */ -static struct pclk_sel uart_pclk_sel = { - .pclk_info = uart_pclk_info, - .pclk_count = ARRAY_SIZE(uart_pclk_info), - .pclk_sel_reg = PERIP_CLK_CFG, - .pclk_sel_mask = UART_CLK_MASK, -}; - -/* uart0 clock */ -static struct clk uart0_clk = { - .en_reg = PERIP1_CLK_ENB, - .en_reg_bit = UART0_CLK_ENB, - .pclk_sel = &uart_pclk_sel, - .pclk_sel_shift = UART_CLK_SHIFT, - .recalc = &follow_parent, -}; - -/* uart1 clock */ -static struct clk uart1_clk = { - .en_reg = PERIP1_CLK_ENB, - .en_reg_bit = UART1_CLK_ENB, - .pclk_sel = &uart_pclk_sel, - .pclk_sel_shift = UART_CLK_SHIFT, - .recalc = &follow_parent, -}; - -/* firda configurations */ -static struct aux_clk_config firda_synth_config = { - .synth_reg = FIRDA_CLK_SYNT, - .masks = &aux_masks, -}; - -/* firda synth clock */ -static struct clk firda_synth_clk = { - .en_reg = FIRDA_CLK_SYNT, - .en_reg_bit = AUX_SYNT_ENB, - .pclk = &pll1_clk, - .calc_rate = &aux_calc_rate, - .recalc = &aux_clk_recalc, - .set_rate = &aux_clk_set_rate, - .rate_config = {aux_rtbl, ARRAY_SIZE(aux_rtbl), 2}, - .private_data = &firda_synth_config, -}; - -/* firda parents */ -static struct pclk_info firda_pclk_info[] = { - { - .pclk = &firda_synth_clk, - .pclk_val = AUX_CLK_PLL1_VAL, - }, { - .pclk = &pll3_48m_clk, - .pclk_val = AUX_CLK_PLL3_VAL, - }, -}; - -/* firda parent select structure */ -static struct pclk_sel firda_pclk_sel = { - .pclk_info = firda_pclk_info, - .pclk_count = ARRAY_SIZE(firda_pclk_info), - .pclk_sel_reg = PERIP_CLK_CFG, - .pclk_sel_mask = FIRDA_CLK_MASK, -}; - -/* firda clock */ -static struct clk firda_clk = { - .en_reg = PERIP1_CLK_ENB, - .en_reg_bit = FIRDA_CLK_ENB, - .pclk_sel = &firda_pclk_sel, - .pclk_sel_shift = FIRDA_CLK_SHIFT, - .recalc = &follow_parent, -}; - -/* clcd configurations */ -static struct aux_clk_config clcd_synth_config = { - .synth_reg = CLCD_CLK_SYNT, - .masks = &aux_masks, -}; - -/* firda synth clock */ -static struct clk clcd_synth_clk = { - .en_reg = CLCD_CLK_SYNT, - .en_reg_bit = AUX_SYNT_ENB, - .pclk = &pll1_clk, - .calc_rate = &aux_calc_rate, - .recalc = &aux_clk_recalc, - .set_rate = &aux_clk_set_rate, - .rate_config = {aux_rtbl, ARRAY_SIZE(aux_rtbl), 2}, - .private_data = &clcd_synth_config, -}; - -/* clcd parents */ -static struct pclk_info clcd_pclk_info[] = { - { - .pclk = &clcd_synth_clk, - .pclk_val = AUX_CLK_PLL1_VAL, - }, { - .pclk = &pll3_48m_clk, - .pclk_val = AUX_CLK_PLL3_VAL, - }, -}; - -/* clcd parent select structure */ -static struct pclk_sel clcd_pclk_sel = { - .pclk_info = clcd_pclk_info, - .pclk_count = ARRAY_SIZE(clcd_pclk_info), - .pclk_sel_reg = PERIP_CLK_CFG, - .pclk_sel_mask = CLCD_CLK_MASK, -}; - -/* clcd clock */ -static struct clk clcd_clk = { - .en_reg = PERIP1_CLK_ENB, - .en_reg_bit = CLCD_CLK_ENB, - .pclk_sel = &clcd_pclk_sel, - .pclk_sel_shift = CLCD_CLK_SHIFT, - .recalc = &follow_parent, -}; - -/* gpt synthesizer masks */ -static struct gpt_clk_masks gpt_masks = { - .mscale_sel_mask = GPT_MSCALE_MASK, - .mscale_sel_shift = GPT_MSCALE_SHIFT, - .nscale_sel_mask = GPT_NSCALE_MASK, - .nscale_sel_shift = GPT_NSCALE_SHIFT, -}; - -/* gpt rate configuration table, in ascending order of rates */ -struct gpt_rate_tbl gpt_rtbl[] = { - /* For pll1 = 332 MHz */ - {.mscale = 4, .nscale = 0}, /* 41.5 MHz */ - {.mscale = 2, .nscale = 0}, /* 55.3 MHz */ - {.mscale = 1, .nscale = 0}, /* 83 MHz */ -}; - -/* gpt0 synth clk config*/ -static struct gpt_clk_config gpt0_synth_config = { - .synth_reg = PRSC1_CLK_CFG, - .masks = &gpt_masks, -}; - -/* gpt synth clock */ -static struct clk gpt0_synth_clk = { - .flags = ALWAYS_ENABLED, - .pclk = &pll1_clk, - .calc_rate = &gpt_calc_rate, - .recalc = &gpt_clk_recalc, - .set_rate = &gpt_clk_set_rate, - .rate_config = {gpt_rtbl, ARRAY_SIZE(gpt_rtbl), 2}, - .private_data = &gpt0_synth_config, -}; - -/* gpt parents */ -static struct pclk_info gpt0_pclk_info[] = { - { - .pclk = &gpt0_synth_clk, - .pclk_val = AUX_CLK_PLL1_VAL, - }, { - .pclk = &pll3_48m_clk, - .pclk_val = AUX_CLK_PLL3_VAL, - }, -}; - -/* gpt parent select structure */ -static struct pclk_sel gpt0_pclk_sel = { - .pclk_info = gpt0_pclk_info, - .pclk_count = ARRAY_SIZE(gpt0_pclk_info), - .pclk_sel_reg = PERIP_CLK_CFG, - .pclk_sel_mask = GPT_CLK_MASK, -}; - -/* gpt0 ARM1 subsystem timer clock */ -static struct clk gpt0_clk = { - .flags = ALWAYS_ENABLED, - .pclk_sel = &gpt0_pclk_sel, - .pclk_sel_shift = GPT0_CLK_SHIFT, - .recalc = &follow_parent, -}; - - -/* Note: gpt0 and gpt1 share same parent clocks */ -/* gpt parent select structure */ -static struct pclk_sel gpt1_pclk_sel = { - .pclk_info = gpt0_pclk_info, - .pclk_count = ARRAY_SIZE(gpt0_pclk_info), - .pclk_sel_reg = PERIP_CLK_CFG, - .pclk_sel_mask = GPT_CLK_MASK, -}; - -/* gpt1 timer clock */ -static struct clk gpt1_clk = { - .flags = ALWAYS_ENABLED, - .pclk_sel = &gpt1_pclk_sel, - .pclk_sel_shift = GPT1_CLK_SHIFT, - .recalc = &follow_parent, -}; - -/* gpt2 synth clk config*/ -static struct gpt_clk_config gpt2_synth_config = { - .synth_reg = PRSC2_CLK_CFG, - .masks = &gpt_masks, -}; - -/* gpt synth clock */ -static struct clk gpt2_synth_clk = { - .flags = ALWAYS_ENABLED, - .pclk = &pll1_clk, - .calc_rate = &gpt_calc_rate, - .recalc = &gpt_clk_recalc, - .set_rate = &gpt_clk_set_rate, - .rate_config = {gpt_rtbl, ARRAY_SIZE(gpt_rtbl), 2}, - .private_data = &gpt2_synth_config, -}; - -/* gpt parents */ -static struct pclk_info gpt2_pclk_info[] = { - { - .pclk = &gpt2_synth_clk, - .pclk_val = AUX_CLK_PLL1_VAL, - }, { - .pclk = &pll3_48m_clk, - .pclk_val = AUX_CLK_PLL3_VAL, - }, -}; - -/* gpt parent select structure */ -static struct pclk_sel gpt2_pclk_sel = { - .pclk_info = gpt2_pclk_info, - .pclk_count = ARRAY_SIZE(gpt2_pclk_info), - .pclk_sel_reg = PERIP_CLK_CFG, - .pclk_sel_mask = GPT_CLK_MASK, -}; - -/* gpt2 timer clock */ -static struct clk gpt2_clk = { - .flags = ALWAYS_ENABLED, - .pclk_sel = &gpt2_pclk_sel, - .pclk_sel_shift = GPT2_CLK_SHIFT, - .recalc = &follow_parent, -}; - -/* gpt3 synth clk config*/ -static struct gpt_clk_config gpt3_synth_config = { - .synth_reg = PRSC3_CLK_CFG, - .masks = &gpt_masks, -}; - -/* gpt synth clock */ -static struct clk gpt3_synth_clk = { - .flags = ALWAYS_ENABLED, - .pclk = &pll1_clk, - .calc_rate = &gpt_calc_rate, - .recalc = &gpt_clk_recalc, - .set_rate = &gpt_clk_set_rate, - .rate_config = {gpt_rtbl, ARRAY_SIZE(gpt_rtbl), 2}, - .private_data = &gpt3_synth_config, -}; - -/* gpt parents */ -static struct pclk_info gpt3_pclk_info[] = { - { - .pclk = &gpt3_synth_clk, - .pclk_val = AUX_CLK_PLL1_VAL, - }, { - .pclk = &pll3_48m_clk, - .pclk_val = AUX_CLK_PLL3_VAL, - }, -}; - -/* gpt parent select structure */ -static struct pclk_sel gpt3_pclk_sel = { - .pclk_info = gpt3_pclk_info, - .pclk_count = ARRAY_SIZE(gpt3_pclk_info), - .pclk_sel_reg = PERIP_CLK_CFG, - .pclk_sel_mask = GPT_CLK_MASK, -}; - -/* gpt3 timer clock */ -static struct clk gpt3_clk = { - .flags = ALWAYS_ENABLED, - .pclk_sel = &gpt3_pclk_sel, - .pclk_sel_shift = GPT3_CLK_SHIFT, - .recalc = &follow_parent, -}; - -/* clock derived from pll3 clk */ -/* usbh0 clock */ -static struct clk usbh0_clk = { - .pclk = &pll3_48m_clk, - .en_reg = PERIP1_CLK_ENB, - .en_reg_bit = USBH0_CLK_ENB, - .recalc = &follow_parent, -}; - -/* usbh1 clock */ -static struct clk usbh1_clk = { - .pclk = &pll3_48m_clk, - .en_reg = PERIP1_CLK_ENB, - .en_reg_bit = USBH1_CLK_ENB, - .recalc = &follow_parent, -}; - -/* usbd clock */ -static struct clk usbd_clk = { - .pclk = &pll3_48m_clk, - .en_reg = PERIP1_CLK_ENB, - .en_reg_bit = USBD_CLK_ENB, - .recalc = &follow_parent, -}; - -/* clock derived from ahb clk */ -/* apb masks structure */ -static struct bus_clk_masks apb_masks = { - .mask = HCLK_PCLK_RATIO_MASK, - .shift = HCLK_PCLK_RATIO_SHIFT, -}; - -/* apb configuration structure */ -static struct bus_clk_config apb_config = { - .reg = CORE_CLK_CFG, - .masks = &apb_masks, -}; - -/* apb clock */ -static struct clk apb_clk = { - .flags = ALWAYS_ENABLED, - .pclk = &ahb_clk, - .calc_rate = &bus_calc_rate, - .recalc = &bus_clk_recalc, - .set_rate = &bus_clk_set_rate, - .rate_config = {bus_rtbl, ARRAY_SIZE(bus_rtbl), 2}, - .private_data = &apb_config, -}; - -/* i2c clock */ -static struct clk i2c_clk = { - .pclk = &ahb_clk, - .en_reg = PERIP1_CLK_ENB, - .en_reg_bit = I2C_CLK_ENB, - .recalc = &follow_parent, -}; - -/* dma clock */ -static struct clk dma_clk = { - .pclk = &ahb_clk, - .en_reg = PERIP1_CLK_ENB, - .en_reg_bit = DMA_CLK_ENB, - .recalc = &follow_parent, -}; - -/* jpeg clock */ -static struct clk jpeg_clk = { - .pclk = &ahb_clk, - .en_reg = PERIP1_CLK_ENB, - .en_reg_bit = JPEG_CLK_ENB, - .recalc = &follow_parent, -}; - -/* gmac clock */ -static struct clk gmac_clk = { - .pclk = &ahb_clk, - .en_reg = PERIP1_CLK_ENB, - .en_reg_bit = GMAC_CLK_ENB, - .recalc = &follow_parent, -}; - -/* smi clock */ -static struct clk smi_clk = { - .pclk = &ahb_clk, - .en_reg = PERIP1_CLK_ENB, - .en_reg_bit = SMI_CLK_ENB, - .recalc = &follow_parent, -}; - -/* fsmc clock */ -static struct clk fsmc_clk = { - .pclk = &ahb_clk, - .en_reg = PERIP1_CLK_ENB, - .en_reg_bit = FSMC_CLK_ENB, - .recalc = &follow_parent, -}; - -/* clock derived from apb clk */ -/* adc clock */ -static struct clk adc_clk = { - .pclk = &apb_clk, - .en_reg = PERIP1_CLK_ENB, - .en_reg_bit = ADC_CLK_ENB, - .recalc = &follow_parent, -}; - -/* ssp0 clock */ -static struct clk ssp0_clk = { - .pclk = &apb_clk, - .en_reg = PERIP1_CLK_ENB, - .en_reg_bit = SSP0_CLK_ENB, - .recalc = &follow_parent, -}; - -/* ssp1 clock */ -static struct clk ssp1_clk = { - .pclk = &apb_clk, - .en_reg = PERIP1_CLK_ENB, - .en_reg_bit = SSP1_CLK_ENB, - .recalc = &follow_parent, -}; - -/* ssp2 clock */ -static struct clk ssp2_clk = { - .pclk = &apb_clk, - .en_reg = PERIP1_CLK_ENB, - .en_reg_bit = SSP2_CLK_ENB, - .recalc = &follow_parent, -}; - -/* gpio0 ARM subsystem clock */ -static struct clk gpio0_clk = { - .flags = ALWAYS_ENABLED, - .pclk = &apb_clk, - .recalc = &follow_parent, -}; - -/* gpio1 clock */ -static struct clk gpio1_clk = { - .pclk = &apb_clk, - .en_reg = PERIP1_CLK_ENB, - .en_reg_bit = GPIO1_CLK_ENB, - .recalc = &follow_parent, -}; - -/* gpio2 clock */ -static struct clk gpio2_clk = { - .pclk = &apb_clk, - .en_reg = PERIP1_CLK_ENB, - .en_reg_bit = GPIO2_CLK_ENB, - .recalc = &follow_parent, -}; - -static struct clk dummy_apb_pclk; - -/* array of all spear 6xx clock lookups */ -static struct clk_lookup spear_clk_lookups[] = { - { .con_id = "apb_pclk", .clk = &dummy_apb_pclk}, - /* root clks */ - { .con_id = "osc_32k_clk", .clk = &osc_32k_clk}, - { .con_id = "osc_30m_clk", .clk = &osc_30m_clk}, - /* clock derived from 32 KHz os clk */ - { .dev_id = "rtc-spear", .clk = &rtc_clk}, - /* clock derived from 30 MHz os clk */ - { .con_id = "pll1_clk", .clk = &pll1_clk}, - { .con_id = "pll3_48m_clk", .clk = &pll3_48m_clk}, - { .dev_id = "wdt", .clk = &wdt_clk}, - /* clock derived from pll1 clk */ - { .con_id = "cpu_clk", .clk = &cpu_clk}, - { .con_id = "ahb_clk", .clk = &ahb_clk}, - { .con_id = "uart_synth_clk", .clk = &uart_synth_clk}, - { .con_id = "firda_synth_clk", .clk = &firda_synth_clk}, - { .con_id = "clcd_synth_clk", .clk = &clcd_synth_clk}, - { .con_id = "gpt0_synth_clk", .clk = &gpt0_synth_clk}, - { .con_id = "gpt2_synth_clk", .clk = &gpt2_synth_clk}, - { .con_id = "gpt3_synth_clk", .clk = &gpt3_synth_clk}, - { .dev_id = "d0000000.serial", .clk = &uart0_clk}, - { .dev_id = "d0080000.serial", .clk = &uart1_clk}, - { .dev_id = "firda", .clk = &firda_clk}, - { .dev_id = "clcd", .clk = &clcd_clk}, - { .dev_id = "gpt0", .clk = &gpt0_clk}, - { .dev_id = "gpt1", .clk = &gpt1_clk}, - { .dev_id = "gpt2", .clk = &gpt2_clk}, - { .dev_id = "gpt3", .clk = &gpt3_clk}, - /* clock derived from pll3 clk */ - { .dev_id = "designware_udc", .clk = &usbd_clk}, - { .con_id = "usbh.0_clk", .clk = &usbh0_clk}, - { .con_id = "usbh.1_clk", .clk = &usbh1_clk}, - /* clock derived from ahb clk */ - { .con_id = "apb_clk", .clk = &apb_clk}, - { .dev_id = "d0200000.i2c", .clk = &i2c_clk}, - { .dev_id = "dma", .clk = &dma_clk}, - { .dev_id = "jpeg", .clk = &jpeg_clk}, - { .dev_id = "gmac", .clk = &gmac_clk}, - { .dev_id = "smi", .clk = &smi_clk}, - { .dev_id = "fsmc-nand", .clk = &fsmc_clk}, - /* clock derived from apb clk */ - { .dev_id = "adc", .clk = &adc_clk}, - { .dev_id = "ssp-pl022.0", .clk = &ssp0_clk}, - { .dev_id = "ssp-pl022.1", .clk = &ssp1_clk}, - { .dev_id = "ssp-pl022.2", .clk = &ssp2_clk}, - { .dev_id = "f0100000.gpio", .clk = &gpio0_clk}, - { .dev_id = "fc980000.gpio", .clk = &gpio1_clk}, - { .dev_id = "d8100000.gpio", .clk = &gpio2_clk}, -}; - -void __init spear6xx_clk_init(void) -{ - int i; - - for (i = 0; i < ARRAY_SIZE(spear_clk_lookups); i++) - clk_register(&spear_clk_lookups[i]); - - clk_init(); -} diff --git a/arch/arm/mach-spear6xx/include/mach/misc_regs.h b/arch/arm/mach-spear6xx/include/mach/misc_regs.h index 68c20a007b0d..633074fddf9a 100644 --- a/arch/arm/mach-spear6xx/include/mach/misc_regs.h +++ b/arch/arm/mach-spear6xx/include/mach/misc_regs.h @@ -15,160 +15,8 @@ #define __MACH_MISC_REGS_H #include +#include #define MISC_BASE IOMEM(VA_SPEAR6XX_ICM3_MISC_REG_BASE) -#define SOC_CFG_CTR (MISC_BASE + 0x000) -#define DIAG_CFG_CTR (MISC_BASE + 0x004) -#define PLL1_CTR (MISC_BASE + 0x008) -#define PLL1_FRQ (MISC_BASE + 0x00C) -#define PLL1_MOD (MISC_BASE + 0x010) -#define PLL2_CTR (MISC_BASE + 0x014) -/* PLL_CTR register masks */ -#define PLL_ENABLE 2 -#define PLL_MODE_SHIFT 4 -#define PLL_MODE_MASK 0x3 -#define PLL_MODE_NORMAL 0 -#define PLL_MODE_FRACTION 1 -#define PLL_MODE_DITH_DSB 2 -#define PLL_MODE_DITH_SSB 3 - -#define PLL2_FRQ (MISC_BASE + 0x018) -/* PLL FRQ register masks */ -#define PLL_DIV_N_SHIFT 0 -#define PLL_DIV_N_MASK 0xFF -#define PLL_DIV_P_SHIFT 8 -#define PLL_DIV_P_MASK 0x7 -#define PLL_NORM_FDBK_M_SHIFT 24 -#define PLL_NORM_FDBK_M_MASK 0xFF -#define PLL_DITH_FDBK_M_SHIFT 16 -#define PLL_DITH_FDBK_M_MASK 0xFFFF - -#define PLL2_MOD (MISC_BASE + 0x01C) -#define PLL_CLK_CFG (MISC_BASE + 0x020) -#define CORE_CLK_CFG (MISC_BASE + 0x024) -/* CORE CLK CFG register masks */ -#define PLL_HCLK_RATIO_SHIFT 10 -#define PLL_HCLK_RATIO_MASK 0x3 -#define HCLK_PCLK_RATIO_SHIFT 8 -#define HCLK_PCLK_RATIO_MASK 0x3 - -#define PERIP_CLK_CFG (MISC_BASE + 0x028) -/* PERIP_CLK_CFG register masks */ -#define CLCD_CLK_SHIFT 2 -#define CLCD_CLK_MASK 0x3 -#define UART_CLK_SHIFT 4 -#define UART_CLK_MASK 0x1 -#define FIRDA_CLK_SHIFT 5 -#define FIRDA_CLK_MASK 0x3 -#define GPT0_CLK_SHIFT 8 -#define GPT1_CLK_SHIFT 10 -#define GPT2_CLK_SHIFT 11 -#define GPT3_CLK_SHIFT 12 -#define GPT_CLK_MASK 0x1 -#define AUX_CLK_PLL3_VAL 0 -#define AUX_CLK_PLL1_VAL 1 - -#define PERIP1_CLK_ENB (MISC_BASE + 0x02C) -/* PERIP1_CLK_ENB register masks */ -#define UART0_CLK_ENB 3 -#define UART1_CLK_ENB 4 -#define SSP0_CLK_ENB 5 -#define SSP1_CLK_ENB 6 -#define I2C_CLK_ENB 7 -#define JPEG_CLK_ENB 8 -#define FSMC_CLK_ENB 9 -#define FIRDA_CLK_ENB 10 -#define GPT2_CLK_ENB 11 -#define GPT3_CLK_ENB 12 -#define GPIO2_CLK_ENB 13 -#define SSP2_CLK_ENB 14 -#define ADC_CLK_ENB 15 -#define GPT1_CLK_ENB 11 -#define RTC_CLK_ENB 17 -#define GPIO1_CLK_ENB 18 -#define DMA_CLK_ENB 19 -#define SMI_CLK_ENB 21 -#define CLCD_CLK_ENB 22 -#define GMAC_CLK_ENB 23 -#define USBD_CLK_ENB 24 -#define USBH0_CLK_ENB 25 -#define USBH1_CLK_ENB 26 - -#define SOC_CORE_ID (MISC_BASE + 0x030) -#define RAS_CLK_ENB (MISC_BASE + 0x034) -#define PERIP1_SOF_RST (MISC_BASE + 0x038) -/* PERIP1_SOF_RST register masks */ -#define JPEG_SOF_RST 8 - -#define SOC_USER_ID (MISC_BASE + 0x03C) -#define RAS_SOF_RST (MISC_BASE + 0x040) -#define PRSC1_CLK_CFG (MISC_BASE + 0x044) -#define PRSC2_CLK_CFG (MISC_BASE + 0x048) -#define PRSC3_CLK_CFG (MISC_BASE + 0x04C) -/* gpt synthesizer register masks */ -#define GPT_MSCALE_SHIFT 0 -#define GPT_MSCALE_MASK 0xFFF -#define GPT_NSCALE_SHIFT 12 -#define GPT_NSCALE_MASK 0xF - -#define AMEM_CLK_CFG (MISC_BASE + 0x050) -#define EXPI_CLK_CFG (MISC_BASE + 0x054) -#define CLCD_CLK_SYNT (MISC_BASE + 0x05C) -#define FIRDA_CLK_SYNT (MISC_BASE + 0x060) -#define UART_CLK_SYNT (MISC_BASE + 0x064) -#define GMAC_CLK_SYNT (MISC_BASE + 0x068) -#define RAS1_CLK_SYNT (MISC_BASE + 0x06C) -#define RAS2_CLK_SYNT (MISC_BASE + 0x070) -#define RAS3_CLK_SYNT (MISC_BASE + 0x074) -#define RAS4_CLK_SYNT (MISC_BASE + 0x078) -/* aux clk synthesiser register masks for irda to ras4 */ -#define AUX_SYNT_ENB 31 -#define AUX_EQ_SEL_SHIFT 30 -#define AUX_EQ_SEL_MASK 1 -#define AUX_EQ1_SEL 0 -#define AUX_EQ2_SEL 1 -#define AUX_XSCALE_SHIFT 16 -#define AUX_XSCALE_MASK 0xFFF -#define AUX_YSCALE_SHIFT 0 -#define AUX_YSCALE_MASK 0xFFF - -#define ICM1_ARB_CFG (MISC_BASE + 0x07C) -#define ICM2_ARB_CFG (MISC_BASE + 0x080) -#define ICM3_ARB_CFG (MISC_BASE + 0x084) -#define ICM4_ARB_CFG (MISC_BASE + 0x088) -#define ICM5_ARB_CFG (MISC_BASE + 0x08C) -#define ICM6_ARB_CFG (MISC_BASE + 0x090) -#define ICM7_ARB_CFG (MISC_BASE + 0x094) -#define ICM8_ARB_CFG (MISC_BASE + 0x098) -#define ICM9_ARB_CFG (MISC_BASE + 0x09C) -#define DMA_CHN_CFG (MISC_BASE + 0x0A0) -#define USB2_PHY_CFG (MISC_BASE + 0x0A4) -#define GMAC_CFG_CTR (MISC_BASE + 0x0A8) -#define EXPI_CFG_CTR (MISC_BASE + 0x0AC) -#define PRC1_LOCK_CTR (MISC_BASE + 0x0C0) -#define PRC2_LOCK_CTR (MISC_BASE + 0x0C4) -#define PRC3_LOCK_CTR (MISC_BASE + 0x0C8) -#define PRC4_LOCK_CTR (MISC_BASE + 0x0CC) -#define PRC1_IRQ_CTR (MISC_BASE + 0x0D0) -#define PRC2_IRQ_CTR (MISC_BASE + 0x0D4) -#define PRC3_IRQ_CTR (MISC_BASE + 0x0D8) -#define PRC4_IRQ_CTR (MISC_BASE + 0x0DC) -#define PWRDOWN_CFG_CTR (MISC_BASE + 0x0E0) -#define COMPSSTL_1V8_CFG (MISC_BASE + 0x0E4) -#define COMPSSTL_2V5_CFG (MISC_BASE + 0x0E8) -#define COMPCOR_3V3_CFG (MISC_BASE + 0x0EC) -#define SSTLPAD_CFG_CTR (MISC_BASE + 0x0F0) -#define BIST1_CFG_CTR (MISC_BASE + 0x0F4) -#define BIST2_CFG_CTR (MISC_BASE + 0x0F8) -#define BIST3_CFG_CTR (MISC_BASE + 0x0FC) -#define BIST4_CFG_CTR (MISC_BASE + 0x100) -#define BIST5_CFG_CTR (MISC_BASE + 0x104) -#define BIST1_STS_RES (MISC_BASE + 0x108) -#define BIST2_STS_RES (MISC_BASE + 0x10C) -#define BIST3_STS_RES (MISC_BASE + 0x110) -#define BIST4_STS_RES (MISC_BASE + 0x114) -#define BIST5_STS_RES (MISC_BASE + 0x118) -#define SYSERR_CFG_CTR (MISC_BASE + 0x11C) - #endif /* __MACH_MISC_REGS_H */ diff --git a/arch/arm/mach-spear6xx/spear6xx.c b/arch/arm/mach-spear6xx/spear6xx.c index 2ed8b14c82c8..771e19e3c43c 100644 --- a/arch/arm/mach-spear6xx/spear6xx.c +++ b/arch/arm/mach-spear6xx/spear6xx.c @@ -56,9 +56,6 @@ static struct map_desc spear6xx_io_desc[] __initdata = { void __init spear6xx_map_io(void) { iotable_init(spear6xx_io_desc, ARRAY_SIZE(spear6xx_io_desc)); - - /* This will initialize clock framework */ - spear6xx_clk_init(); } static void __init spear6xx_timer_init(void) @@ -66,6 +63,8 @@ static void __init spear6xx_timer_init(void) char pclk_name[] = "pll3_48m_clk"; struct clk *gpt_clk, *pclk; + spear6xx_clk_init(); + /* get the system timer clock */ gpt_clk = clk_get_sys("gpt0", NULL); if (IS_ERR(gpt_clk)) { diff --git a/arch/arm/plat-spear/Makefile b/arch/arm/plat-spear/Makefile index e0f2e5b9530c..8c0cb6a965a3 100644 --- a/arch/arm/plat-spear/Makefile +++ b/arch/arm/plat-spear/Makefile @@ -3,6 +3,6 @@ # # Common support -obj-y := clock.o restart.o time.o +obj-y := restart.o time.o obj-$(CONFIG_ARCH_SPEAR3XX) += shirq.o padmux.o diff --git a/arch/arm/plat-spear/clock.c b/arch/arm/plat-spear/clock.c deleted file mode 100644 index 67dd00381ea6..000000000000 --- a/arch/arm/plat-spear/clock.c +++ /dev/null @@ -1,1005 +0,0 @@ -/* - * arch/arm/plat-spear/clock.c - * - * Clock framework for SPEAr platform - * - * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -static DEFINE_SPINLOCK(clocks_lock); -static LIST_HEAD(root_clks); -#ifdef CONFIG_DEBUG_FS -static LIST_HEAD(clocks); -#endif - -static void propagate_rate(struct clk *, int on_init); -#ifdef CONFIG_DEBUG_FS -static int clk_debugfs_reparent(struct clk *); -#endif - -static int generic_clk_enable(struct clk *clk) -{ - unsigned int val; - - if (!clk->en_reg) - return -EFAULT; - - val = readl(clk->en_reg); - if (unlikely(clk->flags & RESET_TO_ENABLE)) - val &= ~(1 << clk->en_reg_bit); - else - val |= 1 << clk->en_reg_bit; - - writel(val, clk->en_reg); - - return 0; -} - -static void generic_clk_disable(struct clk *clk) -{ - unsigned int val; - - if (!clk->en_reg) - return; - - val = readl(clk->en_reg); - if (unlikely(clk->flags & RESET_TO_ENABLE)) - val |= 1 << clk->en_reg_bit; - else - val &= ~(1 << clk->en_reg_bit); - - writel(val, clk->en_reg); -} - -/* generic clk ops */ -static struct clkops generic_clkops = { - .enable = generic_clk_enable, - .disable = generic_clk_disable, -}; - -/* returns current programmed clocks clock info structure */ -static struct pclk_info *pclk_info_get(struct clk *clk) -{ - unsigned int val, i; - struct pclk_info *info = NULL; - - val = (readl(clk->pclk_sel->pclk_sel_reg) >> clk->pclk_sel_shift) - & clk->pclk_sel->pclk_sel_mask; - - for (i = 0; i < clk->pclk_sel->pclk_count; i++) { - if (clk->pclk_sel->pclk_info[i].pclk_val == val) - info = &clk->pclk_sel->pclk_info[i]; - } - - return info; -} - -/* - * Set Update pclk, and pclk_info of clk and add clock sibling node to current - * parents children list - */ -static void clk_reparent(struct clk *clk, struct pclk_info *pclk_info) -{ - unsigned long flags; - - spin_lock_irqsave(&clocks_lock, flags); - list_del(&clk->sibling); - list_add(&clk->sibling, &pclk_info->pclk->children); - - clk->pclk = pclk_info->pclk; - spin_unlock_irqrestore(&clocks_lock, flags); - -#ifdef CONFIG_DEBUG_FS - clk_debugfs_reparent(clk); -#endif -} - -static void do_clk_disable(struct clk *clk) -{ - if (!clk) - return; - - if (!clk->usage_count) { - WARN_ON(1); - return; - } - - clk->usage_count--; - - if (clk->usage_count == 0) { - /* - * Surely, there are no active childrens or direct users - * of this clock - */ - if (clk->pclk) - do_clk_disable(clk->pclk); - - if (clk->ops && clk->ops->disable) - clk->ops->disable(clk); - } -} - -static int do_clk_enable(struct clk *clk) -{ - int ret = 0; - - if (!clk) - return -EFAULT; - - if (clk->usage_count == 0) { - if (clk->pclk) { - ret = do_clk_enable(clk->pclk); - if (ret) - goto err; - } - if (clk->ops && clk->ops->enable) { - ret = clk->ops->enable(clk); - if (ret) { - if (clk->pclk) - do_clk_disable(clk->pclk); - goto err; - } - } - /* - * Since the clock is going to be used for the first - * time please reclac - */ - if (clk->recalc) { - ret = clk->recalc(clk); - if (ret) - goto err; - } - } - clk->usage_count++; -err: - return ret; -} - -/* - * clk_enable - inform the system when the clock source should be running. - * @clk: clock source - * - * If the clock can not be enabled/disabled, this should return success. - * - * Returns success (0) or negative errno. - */ -int clk_enable(struct clk *clk) -{ - unsigned long flags; - int ret = 0; - - spin_lock_irqsave(&clocks_lock, flags); - ret = do_clk_enable(clk); - spin_unlock_irqrestore(&clocks_lock, flags); - return ret; -} -EXPORT_SYMBOL(clk_enable); - -/* - * clk_disable - inform the system when the clock source is no longer required. - * @clk: clock source - * - * Inform the system that a clock source is no longer required by - * a driver and may be shut down. - * - * Implementation detail: if the clock source is shared between - * multiple drivers, clk_enable() calls must be balanced by the - * same number of clk_disable() calls for the clock source to be - * disabled. - */ -void clk_disable(struct clk *clk) -{ - unsigned long flags; - - spin_lock_irqsave(&clocks_lock, flags); - do_clk_disable(clk); - spin_unlock_irqrestore(&clocks_lock, flags); -} -EXPORT_SYMBOL(clk_disable); - -/** - * clk_get_rate - obtain the current clock rate (in Hz) for a clock source. - * This is only valid once the clock source has been enabled. - * @clk: clock source - */ -unsigned long clk_get_rate(struct clk *clk) -{ - unsigned long flags, rate; - - spin_lock_irqsave(&clocks_lock, flags); - rate = clk->rate; - spin_unlock_irqrestore(&clocks_lock, flags); - - return rate; -} -EXPORT_SYMBOL(clk_get_rate); - -/** - * clk_set_parent - set the parent clock source for this clock - * @clk: clock source - * @parent: parent clock source - * - * Returns success (0) or negative errno. - */ -int clk_set_parent(struct clk *clk, struct clk *parent) -{ - int i, found = 0, val = 0; - unsigned long flags; - - if (!clk || !parent) - return -EFAULT; - if (clk->pclk == parent) - return 0; - if (!clk->pclk_sel) - return -EPERM; - - /* check if requested parent is in clk parent list */ - for (i = 0; i < clk->pclk_sel->pclk_count; i++) { - if (clk->pclk_sel->pclk_info[i].pclk == parent) { - found = 1; - break; - } - } - - if (!found) - return -EINVAL; - - spin_lock_irqsave(&clocks_lock, flags); - /* reflect parent change in hardware */ - val = readl(clk->pclk_sel->pclk_sel_reg); - val &= ~(clk->pclk_sel->pclk_sel_mask << clk->pclk_sel_shift); - val |= clk->pclk_sel->pclk_info[i].pclk_val << clk->pclk_sel_shift; - writel(val, clk->pclk_sel->pclk_sel_reg); - spin_unlock_irqrestore(&clocks_lock, flags); - - /* reflect parent change in software */ - clk_reparent(clk, &clk->pclk_sel->pclk_info[i]); - - propagate_rate(clk, 0); - return 0; -} -EXPORT_SYMBOL(clk_set_parent); - -/** - * clk_set_rate - set the clock rate for a clock source - * @clk: clock source - * @rate: desired clock rate in Hz - * - * Returns success (0) or negative errno. - */ -int clk_set_rate(struct clk *clk, unsigned long rate) -{ - unsigned long flags; - int ret = -EINVAL; - - if (!clk || !rate) - return -EFAULT; - - if (clk->set_rate) { - spin_lock_irqsave(&clocks_lock, flags); - ret = clk->set_rate(clk, rate); - if (!ret) - /* if successful -> propagate */ - propagate_rate(clk, 0); - spin_unlock_irqrestore(&clocks_lock, flags); - } else if (clk->pclk) { - u32 mult = clk->div_factor ? clk->div_factor : 1; - ret = clk_set_rate(clk->pclk, mult * rate); - } - - return ret; -} -EXPORT_SYMBOL(clk_set_rate); - -/* registers clock in platform clock framework */ -void clk_register(struct clk_lookup *cl) -{ - struct clk *clk; - unsigned long flags; - - if (!cl || !cl->clk) - return; - clk = cl->clk; - - spin_lock_irqsave(&clocks_lock, flags); - - INIT_LIST_HEAD(&clk->children); - if (clk->flags & ALWAYS_ENABLED) - clk->ops = NULL; - else if (!clk->ops) - clk->ops = &generic_clkops; - - /* root clock don't have any parents */ - if (!clk->pclk && !clk->pclk_sel) { - list_add(&clk->sibling, &root_clks); - } else if (clk->pclk && !clk->pclk_sel) { - /* add clocks with only one parent to parent's children list */ - list_add(&clk->sibling, &clk->pclk->children); - } else { - /* clocks with more than one parent */ - struct pclk_info *pclk_info; - - pclk_info = pclk_info_get(clk); - if (!pclk_info) { - pr_err("CLKDEV: invalid pclk info of clk with" - " %s dev_id and %s con_id\n", - cl->dev_id, cl->con_id); - } else { - clk->pclk = pclk_info->pclk; - list_add(&clk->sibling, &pclk_info->pclk->children); - } - } - - spin_unlock_irqrestore(&clocks_lock, flags); - - /* debugfs specific */ -#ifdef CONFIG_DEBUG_FS - list_add(&clk->node, &clocks); - clk->cl = cl; -#endif - - /* add clock to arm clockdev framework */ - clkdev_add(cl); -} - -/** - * propagate_rate - recalculate and propagate all clocks to children - * @pclk: parent clock required to be propogated - * @on_init: flag for enabling clocks which are ENABLED_ON_INIT. - * - * Recalculates all children clocks - */ -void propagate_rate(struct clk *pclk, int on_init) -{ - struct clk *clk, *_temp; - int ret = 0; - - list_for_each_entry_safe(clk, _temp, &pclk->children, sibling) { - if (clk->recalc) { - ret = clk->recalc(clk); - /* - * recalc will return error if clk out is not programmed - * In this case configure default rate. - */ - if (ret && clk->set_rate) - clk->set_rate(clk, 0); - } - propagate_rate(clk, on_init); - - if (!on_init) - continue; - - /* Enable clks enabled on init, in software view */ - if (clk->flags & ENABLED_ON_INIT) - do_clk_enable(clk); - } -} - -/** - * round_rate_index - return closest programmable rate index in rate_config tbl - * @clk: ptr to clock structure - * @drate: desired rate - * @rate: final rate will be returned in this variable only. - * - * Finds index in rate_config for highest clk rate which is less than - * requested rate. If there is no clk rate lesser than requested rate then - * -EINVAL is returned. This routine assumes that rate_config is written - * in incrementing order of clk rates. - * If drate passed is zero then default rate is programmed. - */ -static int -round_rate_index(struct clk *clk, unsigned long drate, unsigned long *rate) -{ - unsigned long tmp = 0, prev_rate = 0; - int index; - - if (!clk->calc_rate) - return -EFAULT; - - if (!drate) - return -EINVAL; - - /* - * This loops ends on two conditions: - * - as soon as clk is found with rate greater than requested rate. - * - if all clks in rate_config are smaller than requested rate. - */ - for (index = 0; index < clk->rate_config.count; index++) { - prev_rate = tmp; - tmp = clk->calc_rate(clk, index); - if (drate < tmp) { - index--; - break; - } - } - /* return if can't find suitable clock */ - if (index < 0) { - index = -EINVAL; - *rate = 0; - } else if (index == clk->rate_config.count) { - /* program with highest clk rate possible */ - index = clk->rate_config.count - 1; - *rate = tmp; - } else - *rate = prev_rate; - - return index; -} - -/** - * clk_round_rate - adjust a rate to the exact rate a clock can provide - * @clk: clock source - * @rate: desired clock rate in Hz - * - * Returns rounded clock rate in Hz, or negative errno. - */ -long clk_round_rate(struct clk *clk, unsigned long drate) -{ - long rate = 0; - int index; - - /* - * propagate call to parent who supports calc_rate. Similar approach is - * used in clk_set_rate. - */ - if (!clk->calc_rate) { - u32 mult; - if (!clk->pclk) - return clk->rate; - - mult = clk->div_factor ? clk->div_factor : 1; - return clk_round_rate(clk->pclk, mult * drate) / mult; - } - - index = round_rate_index(clk, drate, &rate); - if (index >= 0) - return rate; - else - return index; -} -EXPORT_SYMBOL(clk_round_rate); - -/*All below functions are called with lock held */ - -/* - * Calculates pll clk rate for specific value of mode, m, n and p - * - * In normal mode - * rate = (2 * M[15:8] * Fin)/(N * 2^P) - * - * In Dithered mode - * rate = (2 * M[15:0] * Fin)/(256 * N * 2^P) - */ -unsigned long pll_calc_rate(struct clk *clk, int index) -{ - unsigned long rate = clk->pclk->rate; - struct pll_rate_tbl *tbls = clk->rate_config.tbls; - unsigned int mode; - - mode = tbls[index].mode ? 256 : 1; - return (((2 * rate / 10000) * tbls[index].m) / - (mode * tbls[index].n * (1 << tbls[index].p))) * 10000; -} - -/* - * calculates current programmed rate of pll1 - * - * In normal mode - * rate = (2 * M[15:8] * Fin)/(N * 2^P) - * - * In Dithered mode - * rate = (2 * M[15:0] * Fin)/(256 * N * 2^P) - */ -int pll_clk_recalc(struct clk *clk) -{ - struct pll_clk_config *config = clk->private_data; - unsigned int num = 2, den = 0, val, mode = 0; - - mode = (readl(config->mode_reg) >> config->masks->mode_shift) & - config->masks->mode_mask; - - val = readl(config->cfg_reg); - /* calculate denominator */ - den = (val >> config->masks->div_p_shift) & config->masks->div_p_mask; - den = 1 << den; - den *= (val >> config->masks->div_n_shift) & config->masks->div_n_mask; - - /* calculate numerator & denominator */ - if (!mode) { - /* Normal mode */ - num *= (val >> config->masks->norm_fdbk_m_shift) & - config->masks->norm_fdbk_m_mask; - } else { - /* Dithered mode */ - num *= (val >> config->masks->dith_fdbk_m_shift) & - config->masks->dith_fdbk_m_mask; - den *= 256; - } - - if (!den) - return -EINVAL; - - clk->rate = (((clk->pclk->rate/10000) * num) / den) * 10000; - return 0; -} - -/* - * Configures new clock rate of pll - */ -int pll_clk_set_rate(struct clk *clk, unsigned long desired_rate) -{ - struct pll_rate_tbl *tbls = clk->rate_config.tbls; - struct pll_clk_config *config = clk->private_data; - unsigned long val, rate; - int i; - - i = round_rate_index(clk, desired_rate, &rate); - if (i < 0) - return i; - - val = readl(config->mode_reg) & - ~(config->masks->mode_mask << config->masks->mode_shift); - val |= (tbls[i].mode & config->masks->mode_mask) << - config->masks->mode_shift; - writel(val, config->mode_reg); - - val = readl(config->cfg_reg) & - ~(config->masks->div_p_mask << config->masks->div_p_shift); - val |= (tbls[i].p & config->masks->div_p_mask) << - config->masks->div_p_shift; - val &= ~(config->masks->div_n_mask << config->masks->div_n_shift); - val |= (tbls[i].n & config->masks->div_n_mask) << - config->masks->div_n_shift; - val &= ~(config->masks->dith_fdbk_m_mask << - config->masks->dith_fdbk_m_shift); - if (tbls[i].mode) - val |= (tbls[i].m & config->masks->dith_fdbk_m_mask) << - config->masks->dith_fdbk_m_shift; - else - val |= (tbls[i].m & config->masks->norm_fdbk_m_mask) << - config->masks->norm_fdbk_m_shift; - - writel(val, config->cfg_reg); - - clk->rate = rate; - - return 0; -} - -/* - * Calculates ahb, apb clk rate for specific value of div - */ -unsigned long bus_calc_rate(struct clk *clk, int index) -{ - unsigned long rate = clk->pclk->rate; - struct bus_rate_tbl *tbls = clk->rate_config.tbls; - - return rate / (tbls[index].div + 1); -} - -/* calculates current programmed rate of ahb or apb bus */ -int bus_clk_recalc(struct clk *clk) -{ - struct bus_clk_config *config = clk->private_data; - unsigned int div; - - div = ((readl(config->reg) >> config->masks->shift) & - config->masks->mask) + 1; - - if (!div) - return -EINVAL; - - clk->rate = (unsigned long)clk->pclk->rate / div; - return 0; -} - -/* Configures new clock rate of AHB OR APB bus */ -int bus_clk_set_rate(struct clk *clk, unsigned long desired_rate) -{ - struct bus_rate_tbl *tbls = clk->rate_config.tbls; - struct bus_clk_config *config = clk->private_data; - unsigned long val, rate; - int i; - - i = round_rate_index(clk, desired_rate, &rate); - if (i < 0) - return i; - - val = readl(config->reg) & - ~(config->masks->mask << config->masks->shift); - val |= (tbls[i].div & config->masks->mask) << config->masks->shift; - writel(val, config->reg); - - clk->rate = rate; - - return 0; -} - -/* - * gives rate for different values of eq, x and y - * - * Fout from synthesizer can be given from two equations: - * Fout1 = (Fin * X/Y)/2 EQ1 - * Fout2 = Fin * X/Y EQ2 - */ -unsigned long aux_calc_rate(struct clk *clk, int index) -{ - unsigned long rate = clk->pclk->rate; - struct aux_rate_tbl *tbls = clk->rate_config.tbls; - u8 eq = tbls[index].eq ? 1 : 2; - - return (((rate/10000) * tbls[index].xscale) / - (tbls[index].yscale * eq)) * 10000; -} - -/* - * calculates current programmed rate of auxiliary synthesizers - * used by: UART, FIRDA - * - * Fout from synthesizer can be given from two equations: - * Fout1 = (Fin * X/Y)/2 - * Fout2 = Fin * X/Y - * - * Selection of eqn 1 or 2 is programmed in register - */ -int aux_clk_recalc(struct clk *clk) -{ - struct aux_clk_config *config = clk->private_data; - unsigned int num = 1, den = 1, val, eqn; - - val = readl(config->synth_reg); - - eqn = (val >> config->masks->eq_sel_shift) & - config->masks->eq_sel_mask; - if (eqn == config->masks->eq1_mask) - den *= 2; - - /* calculate numerator */ - num = (val >> config->masks->xscale_sel_shift) & - config->masks->xscale_sel_mask; - - /* calculate denominator */ - den *= (val >> config->masks->yscale_sel_shift) & - config->masks->yscale_sel_mask; - - if (!den) - return -EINVAL; - - clk->rate = (((clk->pclk->rate/10000) * num) / den) * 10000; - return 0; -} - -/* Configures new clock rate of auxiliary synthesizers used by: UART, FIRDA*/ -int aux_clk_set_rate(struct clk *clk, unsigned long desired_rate) -{ - struct aux_rate_tbl *tbls = clk->rate_config.tbls; - struct aux_clk_config *config = clk->private_data; - unsigned long val, rate; - int i; - - i = round_rate_index(clk, desired_rate, &rate); - if (i < 0) - return i; - - val = readl(config->synth_reg) & - ~(config->masks->eq_sel_mask << config->masks->eq_sel_shift); - val |= (tbls[i].eq & config->masks->eq_sel_mask) << - config->masks->eq_sel_shift; - val &= ~(config->masks->xscale_sel_mask << - config->masks->xscale_sel_shift); - val |= (tbls[i].xscale & config->masks->xscale_sel_mask) << - config->masks->xscale_sel_shift; - val &= ~(config->masks->yscale_sel_mask << - config->masks->yscale_sel_shift); - val |= (tbls[i].yscale & config->masks->yscale_sel_mask) << - config->masks->yscale_sel_shift; - writel(val, config->synth_reg); - - clk->rate = rate; - - return 0; -} - -/* - * Calculates gpt clk rate for different values of mscale and nscale - * - * Fout= Fin/((2 ^ (N+1)) * (M+1)) - */ -unsigned long gpt_calc_rate(struct clk *clk, int index) -{ - unsigned long rate = clk->pclk->rate; - struct gpt_rate_tbl *tbls = clk->rate_config.tbls; - - return rate / ((1 << (tbls[index].nscale + 1)) * - (tbls[index].mscale + 1)); -} - -/* - * calculates current programmed rate of gpt synthesizers - * Fout from synthesizer can be given from below equations: - * Fout= Fin/((2 ^ (N+1)) * (M+1)) - */ -int gpt_clk_recalc(struct clk *clk) -{ - struct gpt_clk_config *config = clk->private_data; - unsigned int div = 1, val; - - val = readl(config->synth_reg); - div += (val >> config->masks->mscale_sel_shift) & - config->masks->mscale_sel_mask; - div *= 1 << (((val >> config->masks->nscale_sel_shift) & - config->masks->nscale_sel_mask) + 1); - - if (!div) - return -EINVAL; - - clk->rate = (unsigned long)clk->pclk->rate / div; - return 0; -} - -/* Configures new clock rate of gptiliary synthesizers used by: UART, FIRDA*/ -int gpt_clk_set_rate(struct clk *clk, unsigned long desired_rate) -{ - struct gpt_rate_tbl *tbls = clk->rate_config.tbls; - struct gpt_clk_config *config = clk->private_data; - unsigned long val, rate; - int i; - - i = round_rate_index(clk, desired_rate, &rate); - if (i < 0) - return i; - - val = readl(config->synth_reg) & ~(config->masks->mscale_sel_mask << - config->masks->mscale_sel_shift); - val |= (tbls[i].mscale & config->masks->mscale_sel_mask) << - config->masks->mscale_sel_shift; - val &= ~(config->masks->nscale_sel_mask << - config->masks->nscale_sel_shift); - val |= (tbls[i].nscale & config->masks->nscale_sel_mask) << - config->masks->nscale_sel_shift; - writel(val, config->synth_reg); - - clk->rate = rate; - - return 0; -} - -/* - * Calculates clcd clk rate for different values of div - * - * Fout from synthesizer can be given from below equation: - * Fout= Fin/2*div (division factor) - * div is 17 bits:- - * 0-13 (fractional part) - * 14-16 (integer part) - * To calculate Fout we left shift val by 14 bits and divide Fin by - * complete div (including fractional part) and then right shift the - * result by 14 places. - */ -unsigned long clcd_calc_rate(struct clk *clk, int index) -{ - unsigned long rate = clk->pclk->rate; - struct clcd_rate_tbl *tbls = clk->rate_config.tbls; - - rate /= 1000; - rate <<= 12; - rate /= (2 * tbls[index].div); - rate >>= 12; - rate *= 1000; - - return rate; -} - -/* - * calculates current programmed rate of clcd synthesizer - * Fout from synthesizer can be given from below equation: - * Fout= Fin/2*div (division factor) - * div is 17 bits:- - * 0-13 (fractional part) - * 14-16 (integer part) - * To calculate Fout we left shift val by 14 bits and divide Fin by - * complete div (including fractional part) and then right shift the - * result by 14 places. - */ -int clcd_clk_recalc(struct clk *clk) -{ - struct clcd_clk_config *config = clk->private_data; - unsigned int div = 1; - unsigned long prate; - unsigned int val; - - val = readl(config->synth_reg); - div = (val >> config->masks->div_factor_shift) & - config->masks->div_factor_mask; - - if (!div) - return -EINVAL; - - prate = clk->pclk->rate / 1000; /* first level division, make it KHz */ - - clk->rate = (((unsigned long)prate << 12) / (2 * div)) >> 12; - clk->rate *= 1000; - return 0; -} - -/* Configures new clock rate of auxiliary synthesizers used by: UART, FIRDA*/ -int clcd_clk_set_rate(struct clk *clk, unsigned long desired_rate) -{ - struct clcd_rate_tbl *tbls = clk->rate_config.tbls; - struct clcd_clk_config *config = clk->private_data; - unsigned long val, rate; - int i; - - i = round_rate_index(clk, desired_rate, &rate); - if (i < 0) - return i; - - val = readl(config->synth_reg) & ~(config->masks->div_factor_mask << - config->masks->div_factor_shift); - val |= (tbls[i].div & config->masks->div_factor_mask) << - config->masks->div_factor_shift; - writel(val, config->synth_reg); - - clk->rate = rate; - - return 0; -} - -/* - * Used for clocks that always have value as the parent clock divided by a - * fixed divisor - */ -int follow_parent(struct clk *clk) -{ - unsigned int div_factor = (clk->div_factor < 1) ? 1 : clk->div_factor; - - clk->rate = clk->pclk->rate/div_factor; - return 0; -} - -/** - * recalc_root_clocks - recalculate and propagate all root clocks - * - * Recalculates all root clocks (clocks with no parent), which if the - * clock's .recalc is set correctly, should also propagate their rates. - */ -void recalc_root_clocks(void) -{ - struct clk *pclk; - unsigned long flags; - int ret = 0; - - spin_lock_irqsave(&clocks_lock, flags); - list_for_each_entry(pclk, &root_clks, sibling) { - if (pclk->recalc) { - ret = pclk->recalc(pclk); - /* - * recalc will return error if clk out is not programmed - * In this case configure default clock. - */ - if (ret && pclk->set_rate) - pclk->set_rate(pclk, 0); - } - propagate_rate(pclk, 1); - /* Enable clks enabled on init, in software view */ - if (pclk->flags & ENABLED_ON_INIT) - do_clk_enable(pclk); - } - spin_unlock_irqrestore(&clocks_lock, flags); -} - -void __init clk_init(void) -{ - recalc_root_clocks(); -} - -#ifdef CONFIG_DEBUG_FS -/* - * debugfs support to trace clock tree hierarchy and attributes - */ -static struct dentry *clk_debugfs_root; -static int clk_debugfs_register_one(struct clk *c) -{ - int err; - struct dentry *d; - struct clk *pa = c->pclk; - char s[255]; - char *p = s; - - if (c) { - if (c->cl->con_id) - p += sprintf(p, "%s", c->cl->con_id); - if (c->cl->dev_id) - p += sprintf(p, "%s", c->cl->dev_id); - } - d = debugfs_create_dir(s, pa ? pa->dent : clk_debugfs_root); - if (!d) - return -ENOMEM; - c->dent = d; - - d = debugfs_create_u32("usage_count", S_IRUGO, c->dent, - (u32 *)&c->usage_count); - if (!d) { - err = -ENOMEM; - goto err_out; - } - d = debugfs_create_u32("rate", S_IRUGO, c->dent, (u32 *)&c->rate); - if (!d) { - err = -ENOMEM; - goto err_out; - } - d = debugfs_create_x32("flags", S_IRUGO, c->dent, (u32 *)&c->flags); - if (!d) { - err = -ENOMEM; - goto err_out; - } - return 0; - -err_out: - debugfs_remove_recursive(c->dent); - return err; -} - -static int clk_debugfs_register(struct clk *c) -{ - int err; - struct clk *pa = c->pclk; - - if (pa && !pa->dent) { - err = clk_debugfs_register(pa); - if (err) - return err; - } - - if (!c->dent) { - err = clk_debugfs_register_one(c); - if (err) - return err; - } - return 0; -} - -static int __init clk_debugfs_init(void) -{ - struct clk *c; - struct dentry *d; - int err; - - d = debugfs_create_dir("clock", NULL); - if (!d) - return -ENOMEM; - clk_debugfs_root = d; - - list_for_each_entry(c, &clocks, node) { - err = clk_debugfs_register(c); - if (err) - goto err_out; - } - return 0; -err_out: - debugfs_remove_recursive(clk_debugfs_root); - return err; -} -late_initcall(clk_debugfs_init); - -static int clk_debugfs_reparent(struct clk *c) -{ - debugfs_remove(c->dent); - return clk_debugfs_register_one(c); -} -#endif /* CONFIG_DEBUG_FS */ diff --git a/arch/arm/plat-spear/include/plat/clock.h b/arch/arm/plat-spear/include/plat/clock.h deleted file mode 100644 index 0062bafef12d..000000000000 --- a/arch/arm/plat-spear/include/plat/clock.h +++ /dev/null @@ -1,249 +0,0 @@ -/* - * arch/arm/plat-spear/include/plat/clock.h - * - * Clock framework definitions for SPEAr platform - * - * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __PLAT_CLOCK_H -#define __PLAT_CLOCK_H - -#include -#include -#include - -/* clk structure flags */ -#define ALWAYS_ENABLED (1 << 0) /* clock always enabled */ -#define RESET_TO_ENABLE (1 << 1) /* reset register bit to enable clk */ -#define ENABLED_ON_INIT (1 << 2) /* clocks enabled at init */ - -/** - * struct clkops - clock operations - * @enable: pointer to clock enable function - * @disable: pointer to clock disable function - */ -struct clkops { - int (*enable) (struct clk *); - void (*disable) (struct clk *); -}; - -/** - * struct pclk_info - parents info - * @pclk: pointer to parent clk - * @pclk_val: value to be written for selecting this parent - */ -struct pclk_info { - struct clk *pclk; - u8 pclk_val; -}; - -/** - * struct pclk_sel - parents selection configuration - * @pclk_info: pointer to array of parent clock info - * @pclk_count: number of parents - * @pclk_sel_reg: register for selecting a parent - * @pclk_sel_mask: mask for selecting parent (can be used to clear bits also) - */ -struct pclk_sel { - struct pclk_info *pclk_info; - u8 pclk_count; - void __iomem *pclk_sel_reg; - unsigned int pclk_sel_mask; -}; - -/** - * struct rate_config - clk rate configurations - * @tbls: array of device specific clk rate tables, in ascending order of rates - * @count: size of tbls array - * @default_index: default setting when originally disabled - */ -struct rate_config { - void *tbls; - u8 count; - u8 default_index; -}; - -/** - * struct clk - clock structure - * @usage_count: num of users who enabled this clock - * @flags: flags for clock properties - * @rate: programmed clock rate in Hz - * @en_reg: clk enable/disable reg - * @en_reg_bit: clk enable/disable bit - * @ops: clk enable/disable ops - generic_clkops selected if NULL - * @recalc: pointer to clock rate recalculate function - * @set_rate: pointer to clock set rate function - * @calc_rate: pointer to clock get rate function for index - * @rate_config: rate configuration information, used by set_rate - * @div_factor: division factor to parent clock. - * @pclk: current parent clk - * @pclk_sel: pointer to parent selection structure - * @pclk_sel_shift: register shift for selecting parent of this clock - * @children: list for childrens or this clock - * @sibling: node for list of clocks having same parents - * @private_data: clock specific private data - * @node: list to maintain clocks linearly - * @cl: clocklook up associated with this clock - * @dent: object for debugfs - */ -struct clk { - unsigned int usage_count; - unsigned int flags; - unsigned long rate; - void __iomem *en_reg; - u8 en_reg_bit; - const struct clkops *ops; - int (*recalc) (struct clk *); - int (*set_rate) (struct clk *, unsigned long rate); - unsigned long (*calc_rate)(struct clk *, int index); - struct rate_config rate_config; - unsigned int div_factor; - - struct clk *pclk; - struct pclk_sel *pclk_sel; - unsigned int pclk_sel_shift; - - struct list_head children; - struct list_head sibling; - void *private_data; -#ifdef CONFIG_DEBUG_FS - struct list_head node; - struct clk_lookup *cl; - struct dentry *dent; -#endif -}; - -/* pll configuration structure */ -struct pll_clk_masks { - u32 mode_mask; - u32 mode_shift; - - u32 norm_fdbk_m_mask; - u32 norm_fdbk_m_shift; - u32 dith_fdbk_m_mask; - u32 dith_fdbk_m_shift; - u32 div_p_mask; - u32 div_p_shift; - u32 div_n_mask; - u32 div_n_shift; -}; - -struct pll_clk_config { - void __iomem *mode_reg; - void __iomem *cfg_reg; - struct pll_clk_masks *masks; -}; - -/* pll clk rate config structure */ -struct pll_rate_tbl { - u8 mode; - u16 m; - u8 n; - u8 p; -}; - -/* ahb and apb bus configuration structure */ -struct bus_clk_masks { - u32 mask; - u32 shift; -}; - -struct bus_clk_config { - void __iomem *reg; - struct bus_clk_masks *masks; -}; - -/* ahb and apb clk bus rate config structure */ -struct bus_rate_tbl { - u8 div; -}; - -/* Aux clk configuration structure: applicable to UART and FIRDA */ -struct aux_clk_masks { - u32 eq_sel_mask; - u32 eq_sel_shift; - u32 eq1_mask; - u32 eq2_mask; - u32 xscale_sel_mask; - u32 xscale_sel_shift; - u32 yscale_sel_mask; - u32 yscale_sel_shift; -}; - -struct aux_clk_config { - void __iomem *synth_reg; - struct aux_clk_masks *masks; -}; - -/* aux clk rate config structure */ -struct aux_rate_tbl { - u16 xscale; - u16 yscale; - u8 eq; -}; - -/* GPT clk configuration structure */ -struct gpt_clk_masks { - u32 mscale_sel_mask; - u32 mscale_sel_shift; - u32 nscale_sel_mask; - u32 nscale_sel_shift; -}; - -struct gpt_clk_config { - void __iomem *synth_reg; - struct gpt_clk_masks *masks; -}; - -/* gpt clk rate config structure */ -struct gpt_rate_tbl { - u16 mscale; - u16 nscale; -}; - -/* clcd clk configuration structure */ -struct clcd_synth_masks { - u32 div_factor_mask; - u32 div_factor_shift; -}; - -struct clcd_clk_config { - void __iomem *synth_reg; - struct clcd_synth_masks *masks; -}; - -/* clcd clk rate config structure */ -struct clcd_rate_tbl { - u16 div; -}; - -/* platform specific clock functions */ -void __init clk_init(void); -void clk_register(struct clk_lookup *cl); -void recalc_root_clocks(void); - -/* clock recalc & set rate functions */ -int follow_parent(struct clk *clk); -unsigned long pll_calc_rate(struct clk *clk, int index); -int pll_clk_recalc(struct clk *clk); -int pll_clk_set_rate(struct clk *clk, unsigned long desired_rate); -unsigned long bus_calc_rate(struct clk *clk, int index); -int bus_clk_recalc(struct clk *clk); -int bus_clk_set_rate(struct clk *clk, unsigned long desired_rate); -unsigned long gpt_calc_rate(struct clk *clk, int index); -int gpt_clk_recalc(struct clk *clk); -int gpt_clk_set_rate(struct clk *clk, unsigned long desired_rate); -unsigned long aux_calc_rate(struct clk *clk, int index); -int aux_clk_recalc(struct clk *clk); -int aux_clk_set_rate(struct clk *clk, unsigned long desired_rate); -unsigned long clcd_calc_rate(struct clk *clk, int index); -int clcd_clk_recalc(struct clk *clk); -int clcd_clk_set_rate(struct clk *clk, unsigned long desired_rate); - -#endif /* __PLAT_CLOCK_H */ diff --git a/drivers/clk/spear/Makefile b/drivers/clk/spear/Makefile index 9e64824a8000..335886049c83 100644 --- a/drivers/clk/spear/Makefile +++ b/drivers/clk/spear/Makefile @@ -3,3 +3,6 @@ # obj-y += clk.o clk-aux-synth.o clk-frac-synth.o clk-gpt-synth.o clk-vco-pll.o + +obj-$(CONFIG_ARCH_SPEAR3XX) += spear3xx_clock.o +obj-$(CONFIG_ARCH_SPEAR6XX) += spear6xx_clock.o diff --git a/drivers/clk/spear/spear3xx_clock.c b/drivers/clk/spear/spear3xx_clock.c new file mode 100644 index 000000000000..440bb3e4c971 --- /dev/null +++ b/drivers/clk/spear/spear3xx_clock.c @@ -0,0 +1,612 @@ +/* + * SPEAr3xx machines clock framework source file + * + * Copyright (C) 2012 ST Microelectronics + * Viresh Kumar + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include +#include +#include +#include +#include +#include +#include +#include "clk.h" + +static DEFINE_SPINLOCK(_lock); + +#define PLL1_CTR (MISC_BASE + 0x008) +#define PLL1_FRQ (MISC_BASE + 0x00C) +#define PLL2_CTR (MISC_BASE + 0x014) +#define PLL2_FRQ (MISC_BASE + 0x018) +#define PLL_CLK_CFG (MISC_BASE + 0x020) + /* PLL_CLK_CFG register masks */ + #define MCTR_CLK_SHIFT 28 + #define MCTR_CLK_MASK 3 + +#define CORE_CLK_CFG (MISC_BASE + 0x024) + /* CORE CLK CFG register masks */ + #define GEN_SYNTH2_3_CLK_SHIFT 18 + #define GEN_SYNTH2_3_CLK_MASK 1 + + #define HCLK_RATIO_SHIFT 10 + #define HCLK_RATIO_MASK 2 + #define PCLK_RATIO_SHIFT 8 + #define PCLK_RATIO_MASK 2 + +#define PERIP_CLK_CFG (MISC_BASE + 0x028) + /* PERIP_CLK_CFG register masks */ + #define UART_CLK_SHIFT 4 + #define UART_CLK_MASK 1 + #define FIRDA_CLK_SHIFT 5 + #define FIRDA_CLK_MASK 2 + #define GPT0_CLK_SHIFT 8 + #define GPT1_CLK_SHIFT 11 + #define GPT2_CLK_SHIFT 12 + #define GPT_CLK_MASK 1 + +#define PERIP1_CLK_ENB (MISC_BASE + 0x02C) + /* PERIP1_CLK_ENB register masks */ + #define UART_CLK_ENB 3 + #define SSP_CLK_ENB 5 + #define I2C_CLK_ENB 7 + #define JPEG_CLK_ENB 8 + #define FIRDA_CLK_ENB 10 + #define GPT1_CLK_ENB 11 + #define GPT2_CLK_ENB 12 + #define ADC_CLK_ENB 15 + #define RTC_CLK_ENB 17 + #define GPIO_CLK_ENB 18 + #define DMA_CLK_ENB 19 + #define SMI_CLK_ENB 21 + #define GMAC_CLK_ENB 23 + #define USBD_CLK_ENB 24 + #define USBH_CLK_ENB 25 + #define C3_CLK_ENB 31 + +#define RAS_CLK_ENB (MISC_BASE + 0x034) + #define RAS_AHB_CLK_ENB 0 + #define RAS_PLL1_CLK_ENB 1 + #define RAS_APB_CLK_ENB 2 + #define RAS_32K_CLK_ENB 3 + #define RAS_24M_CLK_ENB 4 + #define RAS_48M_CLK_ENB 5 + #define RAS_PLL2_CLK_ENB 7 + #define RAS_SYNT0_CLK_ENB 8 + #define RAS_SYNT1_CLK_ENB 9 + #define RAS_SYNT2_CLK_ENB 10 + #define RAS_SYNT3_CLK_ENB 11 + +#define PRSC0_CLK_CFG (MISC_BASE + 0x044) +#define PRSC1_CLK_CFG (MISC_BASE + 0x048) +#define PRSC2_CLK_CFG (MISC_BASE + 0x04C) +#define AMEM_CLK_CFG (MISC_BASE + 0x050) + #define AMEM_CLK_ENB 0 + +#define CLCD_CLK_SYNT (MISC_BASE + 0x05C) +#define FIRDA_CLK_SYNT (MISC_BASE + 0x060) +#define UART_CLK_SYNT (MISC_BASE + 0x064) +#define GMAC_CLK_SYNT (MISC_BASE + 0x068) +#define GEN0_CLK_SYNT (MISC_BASE + 0x06C) +#define GEN1_CLK_SYNT (MISC_BASE + 0x070) +#define GEN2_CLK_SYNT (MISC_BASE + 0x074) +#define GEN3_CLK_SYNT (MISC_BASE + 0x078) + +/* pll rate configuration table, in ascending order of rates */ +static struct pll_rate_tbl pll_rtbl[] = { + {.mode = 0, .m = 0x53, .n = 0x0C, .p = 0x1}, /* vco 332 & pll 166 MHz */ + {.mode = 0, .m = 0x85, .n = 0x0C, .p = 0x1}, /* vco 532 & pll 266 MHz */ + {.mode = 0, .m = 0xA6, .n = 0x0C, .p = 0x1}, /* vco 664 & pll 332 MHz */ +}; + +/* aux rate configuration table, in ascending order of rates */ +static struct aux_rate_tbl aux_rtbl[] = { + /* For PLL1 = 332 MHz */ + {.xscale = 2, .yscale = 27, .eq = 0}, /* 12.296 MHz */ + {.xscale = 2, .yscale = 8, .eq = 0}, /* 41.5 MHz */ + {.xscale = 2, .yscale = 4, .eq = 0}, /* 83 MHz */ + {.xscale = 1, .yscale = 2, .eq = 1}, /* 166 MHz */ +}; + +/* gpt rate configuration table, in ascending order of rates */ +static struct gpt_rate_tbl gpt_rtbl[] = { + /* For pll1 = 332 MHz */ + {.mscale = 4, .nscale = 0}, /* 41.5 MHz */ + {.mscale = 2, .nscale = 0}, /* 55.3 MHz */ + {.mscale = 1, .nscale = 0}, /* 83 MHz */ +}; + +/* clock parents */ +static const char *uart0_parents[] = { "pll3_48m_clk", "uart_synth_gate_clk", }; +static const char *firda_parents[] = { "pll3_48m_clk", "firda_synth_gate_clk", +}; +static const char *gpt0_parents[] = { "pll3_48m_clk", "gpt0_synth_clk", }; +static const char *gpt1_parents[] = { "pll3_48m_clk", "gpt1_synth_clk", }; +static const char *gpt2_parents[] = { "pll3_48m_clk", "gpt2_synth_clk", }; +static const char *gen2_3_parents[] = { "pll1_clk", "pll2_clk", }; +static const char *ddr_parents[] = { "ahb_clk", "ahbmult2_clk", "none", + "pll2_clk", }; + +#ifdef CONFIG_MACH_SPEAR300 +static void __init spear300_clk_init(void) +{ + struct clk *clk; + + clk = clk_register_fixed_factor(NULL, "clcd_clk", "ras_pll3_48m_clk", 0, + 1, 1); + clk_register_clkdev(clk, NULL, "60000000.clcd"); + + clk = clk_register_fixed_factor(NULL, "fsmc_clk", "ras_ahb_clk", 0, 1, + 1); + clk_register_clkdev(clk, NULL, "94000000.flash"); + + clk = clk_register_fixed_factor(NULL, "sdhci_clk", "ras_ahb_clk", 0, 1, + 1); + clk_register_clkdev(clk, NULL, "70000000.sdhci"); + + clk = clk_register_fixed_factor(NULL, "gpio1_clk", "ras_apb_clk", 0, 1, + 1); + clk_register_clkdev(clk, NULL, "a9000000.gpio"); + + clk = clk_register_fixed_factor(NULL, "kbd_clk", "ras_apb_clk", 0, 1, + 1); + clk_register_clkdev(clk, NULL, "a0000000.kbd"); +} +#endif + +/* array of all spear 310 clock lookups */ +#ifdef CONFIG_MACH_SPEAR310 +static void __init spear310_clk_init(void) +{ + struct clk *clk; + + clk = clk_register_fixed_factor(NULL, "emi_clk", "ras_ahb_clk", 0, 1, + 1); + clk_register_clkdev(clk, "emi", NULL); + + clk = clk_register_fixed_factor(NULL, "fsmc_clk", "ras_ahb_clk", 0, 1, + 1); + clk_register_clkdev(clk, NULL, "44000000.flash"); + + clk = clk_register_fixed_factor(NULL, "tdm_clk", "ras_ahb_clk", 0, 1, + 1); + clk_register_clkdev(clk, NULL, "tdm"); + + clk = clk_register_fixed_factor(NULL, "uart1_clk", "ras_apb_clk", 0, 1, + 1); + clk_register_clkdev(clk, NULL, "b2000000.serial"); + + clk = clk_register_fixed_factor(NULL, "uart2_clk", "ras_apb_clk", 0, 1, + 1); + clk_register_clkdev(clk, NULL, "b2080000.serial"); + + clk = clk_register_fixed_factor(NULL, "uart3_clk", "ras_apb_clk", 0, 1, + 1); + clk_register_clkdev(clk, NULL, "b2100000.serial"); + + clk = clk_register_fixed_factor(NULL, "uart4_clk", "ras_apb_clk", 0, 1, + 1); + clk_register_clkdev(clk, NULL, "b2180000.serial"); + + clk = clk_register_fixed_factor(NULL, "uart5_clk", "ras_apb_clk", 0, 1, + 1); + clk_register_clkdev(clk, NULL, "b2200000.serial"); +} +#endif + +/* array of all spear 320 clock lookups */ +#ifdef CONFIG_MACH_SPEAR320 + #define SMII_PCLK_SHIFT 18 + #define SMII_PCLK_MASK 2 + #define SMII_PCLK_VAL_PAD 0x0 + #define SMII_PCLK_VAL_PLL2 0x1 + #define SMII_PCLK_VAL_SYNTH0 0x2 + #define SDHCI_PCLK_SHIFT 15 + #define SDHCI_PCLK_MASK 1 + #define SDHCI_PCLK_VAL_48M 0x0 + #define SDHCI_PCLK_VAL_SYNTH3 0x1 + #define I2S_REF_PCLK_SHIFT 8 + #define I2S_REF_PCLK_MASK 1 + #define I2S_REF_PCLK_SYNTH_VAL 0x1 + #define I2S_REF_PCLK_PLL2_VAL 0x0 + #define UART1_PCLK_SHIFT 6 + #define UART1_PCLK_MASK 1 + #define SPEAR320_UARTX_PCLK_VAL_SYNTH1 0x0 + #define SPEAR320_UARTX_PCLK_VAL_APB 0x1 + +static const char *i2s_ref_parents[] = { "ras_pll2_clk", + "ras_gen2_synth_gate_clk", }; +static const char *sdhci_parents[] = { "ras_pll3_48m_clk", + "ras_gen3_synth_gate_clk", +}; +static const char *smii0_parents[] = { "smii_125m_pad", "ras_pll2_clk", + "ras_gen0_synth_gate_clk", }; +static const char *uartx_parents[] = { "ras_gen1_synth_gate_clk", "ras_apb_clk", +}; + +static void __init spear320_clk_init(void) +{ + struct clk *clk; + + clk = clk_register_fixed_rate(NULL, "smii_125m_pad_clk", NULL, + CLK_IS_ROOT, 125000000); + clk_register_clkdev(clk, "smii_125m_pad", NULL); + + clk = clk_register_fixed_factor(NULL, "clcd_clk", "ras_pll3_48m_clk", 0, + 1, 1); + clk_register_clkdev(clk, NULL, "90000000.clcd"); + + clk = clk_register_fixed_factor(NULL, "emi_clk", "ras_ahb_clk", 0, 1, + 1); + clk_register_clkdev(clk, "emi", NULL); + + clk = clk_register_fixed_factor(NULL, "fsmc_clk", "ras_ahb_clk", 0, 1, + 1); + clk_register_clkdev(clk, NULL, "4c000000.flash"); + + clk = clk_register_fixed_factor(NULL, "i2c1_clk", "ras_ahb_clk", 0, 1, + 1); + clk_register_clkdev(clk, NULL, "a7000000.i2c"); + + clk = clk_register_fixed_factor(NULL, "pwm_clk", "ras_ahb_clk", 0, 1, + 1); + clk_register_clkdev(clk, "pwm", NULL); + + clk = clk_register_fixed_factor(NULL, "ssp1_clk", "ras_ahb_clk", 0, 1, + 1); + clk_register_clkdev(clk, NULL, "a5000000.spi"); + + clk = clk_register_fixed_factor(NULL, "ssp2_clk", "ras_ahb_clk", 0, 1, + 1); + clk_register_clkdev(clk, NULL, "a6000000.spi"); + + clk = clk_register_fixed_factor(NULL, "can0_clk", "ras_apb_clk", 0, 1, + 1); + clk_register_clkdev(clk, NULL, "c_can_platform.0"); + + clk = clk_register_fixed_factor(NULL, "can1_clk", "ras_apb_clk", 0, 1, + 1); + clk_register_clkdev(clk, NULL, "c_can_platform.1"); + + clk = clk_register_fixed_factor(NULL, "i2s_clk", "ras_apb_clk", 0, 1, + 1); + clk_register_clkdev(clk, NULL, "i2s"); + + clk = clk_register_mux(NULL, "i2s_ref_clk", i2s_ref_parents, + ARRAY_SIZE(i2s_ref_parents), 0, SPEAR320_CONTROL_REG, + I2S_REF_PCLK_SHIFT, I2S_REF_PCLK_MASK, 0, &_lock); + clk_register_clkdev(clk, "i2s_ref_clk", NULL); + + clk = clk_register_fixed_factor(NULL, "i2s_sclk", "i2s_ref_clk", 0, 1, + 4); + clk_register_clkdev(clk, "i2s_sclk", NULL); + + clk = clk_register_mux(NULL, "rs485_clk", uartx_parents, + ARRAY_SIZE(uartx_parents), 0, SPEAR320_EXT_CTRL_REG, + SPEAR320_RS485_PCLK_SHIFT, SPEAR320_UARTX_PCLK_MASK, 0, + &_lock); + clk_register_clkdev(clk, NULL, "a9300000.serial"); + + clk = clk_register_mux(NULL, "sdhci_clk", sdhci_parents, + ARRAY_SIZE(sdhci_parents), 0, SPEAR320_CONTROL_REG, + SDHCI_PCLK_SHIFT, SDHCI_PCLK_MASK, 0, &_lock); + clk_register_clkdev(clk, NULL, "70000000.sdhci"); + + clk = clk_register_mux(NULL, "smii_pclk", smii0_parents, + ARRAY_SIZE(smii0_parents), 0, SPEAR320_CONTROL_REG, + SMII_PCLK_SHIFT, SMII_PCLK_MASK, 0, &_lock); + clk_register_clkdev(clk, NULL, "smii_pclk"); + + clk = clk_register_fixed_factor(NULL, "smii_clk", "smii_pclk", 0, 1, 1); + clk_register_clkdev(clk, NULL, "smii"); + + clk = clk_register_mux(NULL, "uart1_clk", uartx_parents, + ARRAY_SIZE(uartx_parents), 0, SPEAR320_CONTROL_REG, + UART1_PCLK_SHIFT, UART1_PCLK_MASK, 0, &_lock); + clk_register_clkdev(clk, NULL, "a3000000.serial"); + + clk = clk_register_mux(NULL, "uart2_clk", uartx_parents, + ARRAY_SIZE(uartx_parents), 0, SPEAR320_EXT_CTRL_REG, + SPEAR320_UART2_PCLK_SHIFT, SPEAR320_UARTX_PCLK_MASK, 0, + &_lock); + clk_register_clkdev(clk, NULL, "a4000000.serial"); + + clk = clk_register_mux(NULL, "uart3_clk", uartx_parents, + ARRAY_SIZE(uartx_parents), 0, SPEAR320_EXT_CTRL_REG, + SPEAR320_UART3_PCLK_SHIFT, SPEAR320_UARTX_PCLK_MASK, 0, + &_lock); + clk_register_clkdev(clk, NULL, "a9100000.serial"); + + clk = clk_register_mux(NULL, "uart4_clk", uartx_parents, + ARRAY_SIZE(uartx_parents), 0, SPEAR320_EXT_CTRL_REG, + SPEAR320_UART4_PCLK_SHIFT, SPEAR320_UARTX_PCLK_MASK, 0, + &_lock); + clk_register_clkdev(clk, NULL, "a9200000.serial"); + + clk = clk_register_mux(NULL, "uart5_clk", uartx_parents, + ARRAY_SIZE(uartx_parents), 0, SPEAR320_EXT_CTRL_REG, + SPEAR320_UART5_PCLK_SHIFT, SPEAR320_UARTX_PCLK_MASK, 0, + &_lock); + clk_register_clkdev(clk, NULL, "60000000.serial"); + + clk = clk_register_mux(NULL, "uart6_clk", uartx_parents, + ARRAY_SIZE(uartx_parents), 0, SPEAR320_EXT_CTRL_REG, + SPEAR320_UART6_PCLK_SHIFT, SPEAR320_UARTX_PCLK_MASK, 0, + &_lock); + clk_register_clkdev(clk, NULL, "60100000.serial"); +} +#endif + +void __init spear3xx_clk_init(void) +{ + struct clk *clk, *clk1; + + clk = clk_register_fixed_rate(NULL, "apb_pclk", NULL, CLK_IS_ROOT, 0); + clk_register_clkdev(clk, "apb_pclk", NULL); + + clk = clk_register_fixed_rate(NULL, "osc_32k_clk", NULL, CLK_IS_ROOT, + 32000); + clk_register_clkdev(clk, "osc_32k_clk", NULL); + + clk = clk_register_fixed_rate(NULL, "osc_24m_clk", NULL, CLK_IS_ROOT, + 24000000); + clk_register_clkdev(clk, "osc_24m_clk", NULL); + + /* clock derived from 32 KHz osc clk */ + clk = clk_register_gate(NULL, "rtc-spear", "osc_32k_clk", 0, + PERIP1_CLK_ENB, RTC_CLK_ENB, 0, &_lock); + clk_register_clkdev(clk, NULL, "fc900000.rtc"); + + /* clock derived from 24 MHz osc clk */ + clk = clk_register_fixed_rate(NULL, "pll3_48m_clk", "osc_24m_clk", 0, + 48000000); + clk_register_clkdev(clk, "pll3_48m_clk", NULL); + + clk = clk_register_fixed_factor(NULL, "wdt_clk", "osc_24m_clk", 0, 1, + 1); + clk_register_clkdev(clk, NULL, "fc880000.wdt"); + + clk = clk_register_vco_pll("vco1_clk", "pll1_clk", NULL, + "osc_24m_clk", 0, PLL1_CTR, PLL1_FRQ, pll_rtbl, + ARRAY_SIZE(pll_rtbl), &_lock, &clk1, NULL); + clk_register_clkdev(clk, "vco1_clk", NULL); + clk_register_clkdev(clk1, "pll1_clk", NULL); + + clk = clk_register_vco_pll("vco2_clk", "pll2_clk", NULL, + "osc_24m_clk", 0, PLL2_CTR, PLL2_FRQ, pll_rtbl, + ARRAY_SIZE(pll_rtbl), &_lock, &clk1, NULL); + clk_register_clkdev(clk, "vco2_clk", NULL); + clk_register_clkdev(clk1, "pll2_clk", NULL); + + /* clock derived from pll1 clk */ + clk = clk_register_fixed_factor(NULL, "cpu_clk", "pll1_clk", 0, 1, 1); + clk_register_clkdev(clk, "cpu_clk", NULL); + + clk = clk_register_divider(NULL, "ahb_clk", "pll1_clk", + CLK_SET_RATE_PARENT, CORE_CLK_CFG, HCLK_RATIO_SHIFT, + HCLK_RATIO_MASK, 0, &_lock); + clk_register_clkdev(clk, "ahb_clk", NULL); + + clk = clk_register_aux("uart_synth_clk", "uart_synth_gate_clk", + "pll1_clk", 0, UART_CLK_SYNT, NULL, aux_rtbl, + ARRAY_SIZE(aux_rtbl), &_lock, &clk1); + clk_register_clkdev(clk, "uart_synth_clk", NULL); + clk_register_clkdev(clk1, "uart_synth_gate_clk", NULL); + + clk = clk_register_mux(NULL, "uart0_mux_clk", uart0_parents, + ARRAY_SIZE(uart0_parents), 0, PERIP_CLK_CFG, + UART_CLK_SHIFT, UART_CLK_MASK, 0, &_lock); + clk_register_clkdev(clk, "uart0_mux_clk", NULL); + + clk = clk_register_gate(NULL, "uart0", "uart0_mux_clk", 0, + PERIP1_CLK_ENB, UART_CLK_ENB, 0, &_lock); + clk_register_clkdev(clk, NULL, "d0000000.serial"); + + clk = clk_register_aux("firda_synth_clk", "firda_synth_gate_clk", + "pll1_clk", 0, FIRDA_CLK_SYNT, NULL, aux_rtbl, + ARRAY_SIZE(aux_rtbl), &_lock, &clk1); + clk_register_clkdev(clk, "firda_synth_clk", NULL); + clk_register_clkdev(clk1, "firda_synth_gate_clk", NULL); + + clk = clk_register_mux(NULL, "firda_mux_clk", firda_parents, + ARRAY_SIZE(firda_parents), 0, PERIP_CLK_CFG, + FIRDA_CLK_SHIFT, FIRDA_CLK_MASK, 0, &_lock); + clk_register_clkdev(clk, "firda_mux_clk", NULL); + + clk = clk_register_gate(NULL, "firda_clk", "firda_mux_clk", 0, + PERIP1_CLK_ENB, FIRDA_CLK_ENB, 0, &_lock); + clk_register_clkdev(clk, NULL, "firda"); + + /* gpt clocks */ + clk_register_gpt("gpt0_synth_clk", "pll1_clk", 0, PRSC0_CLK_CFG, + gpt_rtbl, ARRAY_SIZE(gpt_rtbl), &_lock); + clk = clk_register_mux(NULL, "gpt0_clk", gpt0_parents, + ARRAY_SIZE(gpt0_parents), 0, PERIP_CLK_CFG, + GPT0_CLK_SHIFT, GPT_CLK_MASK, 0, &_lock); + clk_register_clkdev(clk, NULL, "gpt0"); + + clk_register_gpt("gpt1_synth_clk", "pll1_clk", 0, PRSC1_CLK_CFG, + gpt_rtbl, ARRAY_SIZE(gpt_rtbl), &_lock); + clk = clk_register_mux(NULL, "gpt1_mux_clk", gpt1_parents, + ARRAY_SIZE(gpt1_parents), 0, PERIP_CLK_CFG, + GPT1_CLK_SHIFT, GPT_CLK_MASK, 0, &_lock); + clk_register_clkdev(clk, "gpt1_mux_clk", NULL); + clk = clk_register_gate(NULL, "gpt1_clk", "gpt1_mux_clk", 0, + PERIP1_CLK_ENB, GPT1_CLK_ENB, 0, &_lock); + clk_register_clkdev(clk, NULL, "gpt1"); + + clk_register_gpt("gpt2_synth_clk", "pll1_clk", 0, PRSC2_CLK_CFG, + gpt_rtbl, ARRAY_SIZE(gpt_rtbl), &_lock); + clk = clk_register_mux(NULL, "gpt2_mux_clk", gpt2_parents, + ARRAY_SIZE(gpt2_parents), 0, PERIP_CLK_CFG, + GPT2_CLK_SHIFT, GPT_CLK_MASK, 0, &_lock); + clk_register_clkdev(clk, "gpt2_mux_clk", NULL); + clk = clk_register_gate(NULL, "gpt2_clk", "gpt2_mux_clk", 0, + PERIP1_CLK_ENB, GPT2_CLK_ENB, 0, &_lock); + clk_register_clkdev(clk, NULL, "gpt2"); + + /* general synths clocks */ + clk = clk_register_aux("gen0_synth_clk", "gen0_synth_gate_clk", + "pll1_clk", 0, GEN0_CLK_SYNT, NULL, aux_rtbl, + ARRAY_SIZE(aux_rtbl), &_lock, &clk1); + clk_register_clkdev(clk, "gen0_synth_clk", NULL); + clk_register_clkdev(clk1, "gen0_synth_gate_clk", NULL); + + clk = clk_register_aux("gen1_synth_clk", "gen1_synth_gate_clk", + "pll1_clk", 0, GEN1_CLK_SYNT, NULL, aux_rtbl, + ARRAY_SIZE(aux_rtbl), &_lock, &clk1); + clk_register_clkdev(clk, "gen1_synth_clk", NULL); + clk_register_clkdev(clk1, "gen1_synth_gate_clk", NULL); + + clk = clk_register_mux(NULL, "gen2_3_parent_clk", gen2_3_parents, + ARRAY_SIZE(gen2_3_parents), 0, CORE_CLK_CFG, + GEN_SYNTH2_3_CLK_SHIFT, GEN_SYNTH2_3_CLK_MASK, 0, + &_lock); + clk_register_clkdev(clk, "gen2_3_parent_clk", NULL); + + clk = clk_register_aux("gen2_synth_clk", "gen2_synth_gate_clk", + "gen2_3_parent_clk", 0, GEN2_CLK_SYNT, NULL, aux_rtbl, + ARRAY_SIZE(aux_rtbl), &_lock, &clk1); + clk_register_clkdev(clk, "gen2_synth_clk", NULL); + clk_register_clkdev(clk1, "gen2_synth_gate_clk", NULL); + + clk = clk_register_aux("gen3_synth_clk", "gen3_synth_gate_clk", + "gen2_3_parent_clk", 0, GEN3_CLK_SYNT, NULL, aux_rtbl, + ARRAY_SIZE(aux_rtbl), &_lock, &clk1); + clk_register_clkdev(clk, "gen3_synth_clk", NULL); + clk_register_clkdev(clk1, "gen3_synth_gate_clk", NULL); + + /* clock derived from pll3 clk */ + clk = clk_register_gate(NULL, "usbh_clk", "pll3_48m_clk", 0, + PERIP1_CLK_ENB, USBH_CLK_ENB, 0, &_lock); + clk_register_clkdev(clk, "usbh_clk", NULL); + + clk = clk_register_fixed_factor(NULL, "usbh.0_clk", "usbh_clk", 0, 1, + 1); + clk_register_clkdev(clk, "usbh.0_clk", NULL); + + clk = clk_register_fixed_factor(NULL, "usbh.1_clk", "usbh_clk", 0, 1, + 1); + clk_register_clkdev(clk, "usbh.1_clk", NULL); + + clk = clk_register_gate(NULL, "usbd_clk", "pll3_48m_clk", 0, + PERIP1_CLK_ENB, USBD_CLK_ENB, 0, &_lock); + clk_register_clkdev(clk, NULL, "designware_udc"); + + /* clock derived from ahb clk */ + clk = clk_register_fixed_factor(NULL, "ahbmult2_clk", "ahb_clk", 0, 2, + 1); + clk_register_clkdev(clk, "ahbmult2_clk", NULL); + + clk = clk_register_mux(NULL, "ddr_clk", ddr_parents, + ARRAY_SIZE(ddr_parents), 0, PLL_CLK_CFG, MCTR_CLK_SHIFT, + MCTR_CLK_MASK, 0, &_lock); + clk_register_clkdev(clk, "ddr_clk", NULL); + + clk = clk_register_divider(NULL, "apb_clk", "ahb_clk", + CLK_SET_RATE_PARENT, CORE_CLK_CFG, PCLK_RATIO_SHIFT, + PCLK_RATIO_MASK, 0, &_lock); + clk_register_clkdev(clk, "apb_clk", NULL); + + clk = clk_register_gate(NULL, "amem_clk", "ahb_clk", 0, AMEM_CLK_CFG, + AMEM_CLK_ENB, 0, &_lock); + clk_register_clkdev(clk, "amem_clk", NULL); + + clk = clk_register_gate(NULL, "c3_clk", "ahb_clk", 0, PERIP1_CLK_ENB, + C3_CLK_ENB, 0, &_lock); + clk_register_clkdev(clk, NULL, "c3_clk"); + + clk = clk_register_gate(NULL, "dma_clk", "ahb_clk", 0, PERIP1_CLK_ENB, + DMA_CLK_ENB, 0, &_lock); + clk_register_clkdev(clk, NULL, "fc400000.dma"); + + clk = clk_register_gate(NULL, "gmac_clk", "ahb_clk", 0, PERIP1_CLK_ENB, + GMAC_CLK_ENB, 0, &_lock); + clk_register_clkdev(clk, NULL, "e0800000.eth"); + + clk = clk_register_gate(NULL, "i2c0_clk", "ahb_clk", 0, PERIP1_CLK_ENB, + I2C_CLK_ENB, 0, &_lock); + clk_register_clkdev(clk, NULL, "d0180000.i2c"); + + clk = clk_register_gate(NULL, "jpeg_clk", "ahb_clk", 0, PERIP1_CLK_ENB, + JPEG_CLK_ENB, 0, &_lock); + clk_register_clkdev(clk, NULL, "jpeg"); + + clk = clk_register_gate(NULL, "smi_clk", "ahb_clk", 0, PERIP1_CLK_ENB, + SMI_CLK_ENB, 0, &_lock); + clk_register_clkdev(clk, NULL, "fc000000.flash"); + + /* clock derived from apb clk */ + clk = clk_register_gate(NULL, "adc_clk", "apb_clk", 0, PERIP1_CLK_ENB, + ADC_CLK_ENB, 0, &_lock); + clk_register_clkdev(clk, NULL, "adc"); + + clk = clk_register_gate(NULL, "gpio0_clk", "apb_clk", 0, PERIP1_CLK_ENB, + GPIO_CLK_ENB, 0, &_lock); + clk_register_clkdev(clk, NULL, "fc980000.gpio"); + + clk = clk_register_gate(NULL, "ssp0_clk", "apb_clk", 0, PERIP1_CLK_ENB, + SSP_CLK_ENB, 0, &_lock); + clk_register_clkdev(clk, NULL, "d0100000.spi"); + + /* RAS clk enable */ + clk = clk_register_gate(NULL, "ras_ahb_clk", "ahb_clk", 0, RAS_CLK_ENB, + RAS_AHB_CLK_ENB, 0, &_lock); + clk_register_clkdev(clk, "ras_ahb_clk", NULL); + + clk = clk_register_gate(NULL, "ras_apb_clk", "apb_clk", 0, RAS_CLK_ENB, + RAS_APB_CLK_ENB, 0, &_lock); + clk_register_clkdev(clk, "ras_apb_clk", NULL); + + clk = clk_register_gate(NULL, "ras_32k_clk", "osc_32k_clk", 0, + RAS_CLK_ENB, RAS_32K_CLK_ENB, 0, &_lock); + clk_register_clkdev(clk, "ras_32k_clk", NULL); + + clk = clk_register_gate(NULL, "ras_24m_clk", "osc_24m_clk", 0, + RAS_CLK_ENB, RAS_24M_CLK_ENB, 0, &_lock); + clk_register_clkdev(clk, "ras_24m_clk", NULL); + + clk = clk_register_gate(NULL, "ras_pll1_clk", "pll1_clk", 0, + RAS_CLK_ENB, RAS_PLL1_CLK_ENB, 0, &_lock); + clk_register_clkdev(clk, "ras_pll1_clk", NULL); + + clk = clk_register_gate(NULL, "ras_pll2_clk", "pll2_clk", 0, + RAS_CLK_ENB, RAS_PLL2_CLK_ENB, 0, &_lock); + clk_register_clkdev(clk, "ras_pll2_clk", NULL); + + clk = clk_register_gate(NULL, "ras_pll3_48m_clk", "pll3_48m_clk", 0, + RAS_CLK_ENB, RAS_48M_CLK_ENB, 0, &_lock); + clk_register_clkdev(clk, "ras_pll3_48m_clk", NULL); + + clk = clk_register_gate(NULL, "ras_gen0_synth_gate_clk", + "gen0_synth_gate_clk", 0, RAS_CLK_ENB, + RAS_SYNT0_CLK_ENB, 0, &_lock); + clk_register_clkdev(clk, "ras_gen0_synth_gate_clk", NULL); + + clk = clk_register_gate(NULL, "ras_gen1_synth_gate_clk", + "gen1_synth_gate_clk", 0, RAS_CLK_ENB, + RAS_SYNT1_CLK_ENB, 0, &_lock); + clk_register_clkdev(clk, "ras_gen1_synth_gate_clk", NULL); + + clk = clk_register_gate(NULL, "ras_gen2_synth_gate_clk", + "gen2_synth_gate_clk", 0, RAS_CLK_ENB, + RAS_SYNT2_CLK_ENB, 0, &_lock); + clk_register_clkdev(clk, "ras_gen2_synth_gate_clk", NULL); + + clk = clk_register_gate(NULL, "ras_gen3_synth_gate_clk", + "gen3_synth_gate_clk", 0, RAS_CLK_ENB, + RAS_SYNT3_CLK_ENB, 0, &_lock); + clk_register_clkdev(clk, "ras_gen3_synth_gate_clk", NULL); + + if (of_machine_is_compatible("st,spear300")) + spear300_clk_init(); + else if (of_machine_is_compatible("st,spear310")) + spear310_clk_init(); + else if (of_machine_is_compatible("st,spear320")) + spear320_clk_init(); +} diff --git a/drivers/clk/spear/spear6xx_clock.c b/drivers/clk/spear/spear6xx_clock.c new file mode 100644 index 000000000000..f9a20b382304 --- /dev/null +++ b/drivers/clk/spear/spear6xx_clock.c @@ -0,0 +1,342 @@ +/* + * SPEAr6xx machines clock framework source file + * + * Copyright (C) 2012 ST Microelectronics + * Viresh Kumar + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include +#include +#include +#include +#include +#include "clk.h" + +static DEFINE_SPINLOCK(_lock); + +#define PLL1_CTR (MISC_BASE + 0x008) +#define PLL1_FRQ (MISC_BASE + 0x00C) +#define PLL2_CTR (MISC_BASE + 0x014) +#define PLL2_FRQ (MISC_BASE + 0x018) +#define PLL_CLK_CFG (MISC_BASE + 0x020) + /* PLL_CLK_CFG register masks */ + #define MCTR_CLK_SHIFT 28 + #define MCTR_CLK_MASK 3 + +#define CORE_CLK_CFG (MISC_BASE + 0x024) + /* CORE CLK CFG register masks */ + #define HCLK_RATIO_SHIFT 10 + #define HCLK_RATIO_MASK 2 + #define PCLK_RATIO_SHIFT 8 + #define PCLK_RATIO_MASK 2 + +#define PERIP_CLK_CFG (MISC_BASE + 0x028) + /* PERIP_CLK_CFG register masks */ + #define CLCD_CLK_SHIFT 2 + #define CLCD_CLK_MASK 2 + #define UART_CLK_SHIFT 4 + #define UART_CLK_MASK 1 + #define FIRDA_CLK_SHIFT 5 + #define FIRDA_CLK_MASK 2 + #define GPT0_CLK_SHIFT 8 + #define GPT1_CLK_SHIFT 10 + #define GPT2_CLK_SHIFT 11 + #define GPT3_CLK_SHIFT 12 + #define GPT_CLK_MASK 1 + +#define PERIP1_CLK_ENB (MISC_BASE + 0x02C) + /* PERIP1_CLK_ENB register masks */ + #define UART0_CLK_ENB 3 + #define UART1_CLK_ENB 4 + #define SSP0_CLK_ENB 5 + #define SSP1_CLK_ENB 6 + #define I2C_CLK_ENB 7 + #define JPEG_CLK_ENB 8 + #define FSMC_CLK_ENB 9 + #define FIRDA_CLK_ENB 10 + #define GPT2_CLK_ENB 11 + #define GPT3_CLK_ENB 12 + #define GPIO2_CLK_ENB 13 + #define SSP2_CLK_ENB 14 + #define ADC_CLK_ENB 15 + #define GPT1_CLK_ENB 11 + #define RTC_CLK_ENB 17 + #define GPIO1_CLK_ENB 18 + #define DMA_CLK_ENB 19 + #define SMI_CLK_ENB 21 + #define CLCD_CLK_ENB 22 + #define GMAC_CLK_ENB 23 + #define USBD_CLK_ENB 24 + #define USBH0_CLK_ENB 25 + #define USBH1_CLK_ENB 26 + +#define PRSC0_CLK_CFG (MISC_BASE + 0x044) +#define PRSC1_CLK_CFG (MISC_BASE + 0x048) +#define PRSC2_CLK_CFG (MISC_BASE + 0x04C) + +#define CLCD_CLK_SYNT (MISC_BASE + 0x05C) +#define FIRDA_CLK_SYNT (MISC_BASE + 0x060) +#define UART_CLK_SYNT (MISC_BASE + 0x064) + +/* vco rate configuration table, in ascending order of rates */ +static struct pll_rate_tbl pll_rtbl[] = { + {.mode = 0, .m = 0x53, .n = 0x0F, .p = 0x1}, /* vco 332 & pll 166 MHz */ + {.mode = 0, .m = 0x85, .n = 0x0F, .p = 0x1}, /* vco 532 & pll 266 MHz */ + {.mode = 0, .m = 0xA6, .n = 0x0F, .p = 0x1}, /* vco 664 & pll 332 MHz */ +}; + +/* aux rate configuration table, in ascending order of rates */ +static struct aux_rate_tbl aux_rtbl[] = { + /* For PLL1 = 332 MHz */ + {.xscale = 2, .yscale = 8, .eq = 0}, /* 41.5 MHz */ + {.xscale = 2, .yscale = 4, .eq = 0}, /* 83 MHz */ + {.xscale = 1, .yscale = 2, .eq = 1}, /* 166 MHz */ +}; + +static const char *clcd_parents[] = { "pll3_48m_clk", "clcd_synth_gate_clk", }; +static const char *firda_parents[] = { "pll3_48m_clk", "firda_synth_gate_clk", +}; +static const char *uart_parents[] = { "pll3_48m_clk", "uart_synth_gate_clk", }; +static const char *gpt0_1_parents[] = { "pll3_48m_clk", "gpt0_1_synth_clk", }; +static const char *gpt2_parents[] = { "pll3_48m_clk", "gpt2_synth_clk", }; +static const char *gpt3_parents[] = { "pll3_48m_clk", "gpt3_synth_clk", }; +static const char *ddr_parents[] = { "ahb_clk", "ahbmult2_clk", "none", + "pll2_clk", }; + +/* gpt rate configuration table, in ascending order of rates */ +static struct gpt_rate_tbl gpt_rtbl[] = { + /* For pll1 = 332 MHz */ + {.mscale = 4, .nscale = 0}, /* 41.5 MHz */ + {.mscale = 2, .nscale = 0}, /* 55.3 MHz */ + {.mscale = 1, .nscale = 0}, /* 83 MHz */ +}; + +void __init spear6xx_clk_init(void) +{ + struct clk *clk, *clk1; + + clk = clk_register_fixed_rate(NULL, "apb_pclk", NULL, CLK_IS_ROOT, 0); + clk_register_clkdev(clk, "apb_pclk", NULL); + + clk = clk_register_fixed_rate(NULL, "osc_32k_clk", NULL, CLK_IS_ROOT, + 32000); + clk_register_clkdev(clk, "osc_32k_clk", NULL); + + clk = clk_register_fixed_rate(NULL, "osc_30m_clk", NULL, CLK_IS_ROOT, + 30000000); + clk_register_clkdev(clk, "osc_30m_clk", NULL); + + /* clock derived from 32 KHz osc clk */ + clk = clk_register_gate(NULL, "rtc_spear", "osc_32k_clk", 0, + PERIP1_CLK_ENB, RTC_CLK_ENB, 0, &_lock); + clk_register_clkdev(clk, NULL, "rtc-spear"); + + /* clock derived from 30 MHz osc clk */ + clk = clk_register_fixed_rate(NULL, "pll3_48m_clk", "osc_24m_clk", 0, + 48000000); + clk_register_clkdev(clk, "pll3_48m_clk", NULL); + + clk = clk_register_vco_pll("vco1_clk", "pll1_clk", NULL, "osc_30m_clk", + 0, PLL1_CTR, PLL1_FRQ, pll_rtbl, ARRAY_SIZE(pll_rtbl), + &_lock, &clk1, NULL); + clk_register_clkdev(clk, "vco1_clk", NULL); + clk_register_clkdev(clk1, "pll1_clk", NULL); + + clk = clk_register_vco_pll("vco2_clk", "pll2_clk", NULL, + "osc_30m_clk", 0, PLL2_CTR, PLL2_FRQ, pll_rtbl, + ARRAY_SIZE(pll_rtbl), &_lock, &clk1, NULL); + clk_register_clkdev(clk, "vco2_clk", NULL); + clk_register_clkdev(clk1, "pll2_clk", NULL); + + clk = clk_register_fixed_factor(NULL, "wdt_clk", "osc_30m_clk", 0, 1, + 1); + clk_register_clkdev(clk, NULL, "wdt"); + + /* clock derived from pll1 clk */ + clk = clk_register_fixed_factor(NULL, "cpu_clk", "pll1_clk", 0, 1, 1); + clk_register_clkdev(clk, "cpu_clk", NULL); + + clk = clk_register_divider(NULL, "ahb_clk", "pll1_clk", + CLK_SET_RATE_PARENT, CORE_CLK_CFG, HCLK_RATIO_SHIFT, + HCLK_RATIO_MASK, 0, &_lock); + clk_register_clkdev(clk, "ahb_clk", NULL); + + clk = clk_register_aux("uart_synth_clk", "uart_synth_gate_clk", + "pll1_clk", 0, UART_CLK_SYNT, NULL, aux_rtbl, + ARRAY_SIZE(aux_rtbl), &_lock, &clk1); + clk_register_clkdev(clk, "uart_synth_clk", NULL); + clk_register_clkdev(clk1, "uart_synth_gate_clk", NULL); + + clk = clk_register_mux(NULL, "uart_mux_clk", uart_parents, + ARRAY_SIZE(uart_parents), 0, PERIP_CLK_CFG, + UART_CLK_SHIFT, UART_CLK_MASK, 0, &_lock); + clk_register_clkdev(clk, "uart_mux_clk", NULL); + + clk = clk_register_gate(NULL, "uart0", "uart_mux_clk", 0, + PERIP1_CLK_ENB, UART0_CLK_ENB, 0, &_lock); + clk_register_clkdev(clk, NULL, "d0000000.serial"); + + clk = clk_register_gate(NULL, "uart1", "uart_mux_clk", 0, + PERIP1_CLK_ENB, UART1_CLK_ENB, 0, &_lock); + clk_register_clkdev(clk, NULL, "d0080000.serial"); + + clk = clk_register_aux("firda_synth_clk", "firda_synth_gate_clk", + "pll1_clk", 0, FIRDA_CLK_SYNT, NULL, aux_rtbl, + ARRAY_SIZE(aux_rtbl), &_lock, &clk1); + clk_register_clkdev(clk, "firda_synth_clk", NULL); + clk_register_clkdev(clk1, "firda_synth_gate_clk", NULL); + + clk = clk_register_mux(NULL, "firda_mux_clk", firda_parents, + ARRAY_SIZE(firda_parents), 0, PERIP_CLK_CFG, + FIRDA_CLK_SHIFT, FIRDA_CLK_MASK, 0, &_lock); + clk_register_clkdev(clk, "firda_mux_clk", NULL); + + clk = clk_register_gate(NULL, "firda_clk", "firda_mux_clk", 0, + PERIP1_CLK_ENB, FIRDA_CLK_ENB, 0, &_lock); + clk_register_clkdev(clk, NULL, "firda"); + + clk = clk_register_aux("clcd_synth_clk", "clcd_synth_gate_clk", + "pll1_clk", 0, CLCD_CLK_SYNT, NULL, aux_rtbl, + ARRAY_SIZE(aux_rtbl), &_lock, &clk1); + clk_register_clkdev(clk, "clcd_synth_clk", NULL); + clk_register_clkdev(clk1, "clcd_synth_gate_clk", NULL); + + clk = clk_register_mux(NULL, "clcd_mux_clk", clcd_parents, + ARRAY_SIZE(clcd_parents), 0, PERIP_CLK_CFG, + CLCD_CLK_SHIFT, CLCD_CLK_MASK, 0, &_lock); + clk_register_clkdev(clk, "clcd_mux_clk", NULL); + + clk = clk_register_gate(NULL, "clcd_clk", "clcd_mux_clk", 0, + PERIP1_CLK_ENB, CLCD_CLK_ENB, 0, &_lock); + clk_register_clkdev(clk, NULL, "clcd"); + + /* gpt clocks */ + clk = clk_register_gpt("gpt0_1_synth_clk", "pll1_clk", 0, PRSC0_CLK_CFG, + gpt_rtbl, ARRAY_SIZE(gpt_rtbl), &_lock); + clk_register_clkdev(clk, "gpt0_1_synth_clk", NULL); + + clk = clk_register_mux(NULL, "gpt0_mux_clk", gpt0_1_parents, + ARRAY_SIZE(gpt0_1_parents), 0, PERIP_CLK_CFG, + GPT0_CLK_SHIFT, GPT_CLK_MASK, 0, &_lock); + clk_register_clkdev(clk, NULL, "gpt0"); + + clk = clk_register_mux(NULL, "gpt1_mux_clk", gpt0_1_parents, + ARRAY_SIZE(gpt0_1_parents), 0, PERIP_CLK_CFG, + GPT1_CLK_SHIFT, GPT_CLK_MASK, 0, &_lock); + clk_register_clkdev(clk, "gpt1_mux_clk", NULL); + + clk = clk_register_gate(NULL, "gpt1_clk", "gpt1_mux_clk", 0, + PERIP1_CLK_ENB, GPT1_CLK_ENB, 0, &_lock); + clk_register_clkdev(clk, NULL, "gpt1"); + + clk = clk_register_gpt("gpt2_synth_clk", "pll1_clk", 0, PRSC1_CLK_CFG, + gpt_rtbl, ARRAY_SIZE(gpt_rtbl), &_lock); + clk_register_clkdev(clk, "gpt2_synth_clk", NULL); + + clk = clk_register_mux(NULL, "gpt2_mux_clk", gpt2_parents, + ARRAY_SIZE(gpt2_parents), 0, PERIP_CLK_CFG, + GPT2_CLK_SHIFT, GPT_CLK_MASK, 0, &_lock); + clk_register_clkdev(clk, "gpt2_mux_clk", NULL); + + clk = clk_register_gate(NULL, "gpt2_clk", "gpt2_mux_clk", 0, + PERIP1_CLK_ENB, GPT2_CLK_ENB, 0, &_lock); + clk_register_clkdev(clk, NULL, "gpt2"); + + clk = clk_register_gpt("gpt3_synth_clk", "pll1_clk", 0, PRSC2_CLK_CFG, + gpt_rtbl, ARRAY_SIZE(gpt_rtbl), &_lock); + clk_register_clkdev(clk, "gpt3_synth_clk", NULL); + + clk = clk_register_mux(NULL, "gpt3_mux_clk", gpt3_parents, + ARRAY_SIZE(gpt3_parents), 0, PERIP_CLK_CFG, + GPT3_CLK_SHIFT, GPT_CLK_MASK, 0, &_lock); + clk_register_clkdev(clk, "gpt3_mux_clk", NULL); + + clk = clk_register_gate(NULL, "gpt3_clk", "gpt3_mux_clk", 0, + PERIP1_CLK_ENB, GPT3_CLK_ENB, 0, &_lock); + clk_register_clkdev(clk, NULL, "gpt3"); + + /* clock derived from pll3 clk */ + clk = clk_register_gate(NULL, "usbh0_clk", "pll3_48m_clk", 0, + PERIP1_CLK_ENB, USBH0_CLK_ENB, 0, &_lock); + clk_register_clkdev(clk, NULL, "usbh.0_clk"); + + clk = clk_register_gate(NULL, "usbh1_clk", "pll3_48m_clk", 0, + PERIP1_CLK_ENB, USBH1_CLK_ENB, 0, &_lock); + clk_register_clkdev(clk, NULL, "usbh.1_clk"); + + clk = clk_register_gate(NULL, "usbd_clk", "pll3_48m_clk", 0, + PERIP1_CLK_ENB, USBD_CLK_ENB, 0, &_lock); + clk_register_clkdev(clk, NULL, "designware_udc"); + + /* clock derived from ahb clk */ + clk = clk_register_fixed_factor(NULL, "ahbmult2_clk", "ahb_clk", 0, 2, + 1); + clk_register_clkdev(clk, "ahbmult2_clk", NULL); + + clk = clk_register_mux(NULL, "ddr_clk", ddr_parents, + ARRAY_SIZE(ddr_parents), + 0, PLL_CLK_CFG, MCTR_CLK_SHIFT, MCTR_CLK_MASK, 0, + &_lock); + clk_register_clkdev(clk, "ddr_clk", NULL); + + clk = clk_register_divider(NULL, "apb_clk", "ahb_clk", + CLK_SET_RATE_PARENT, CORE_CLK_CFG, PCLK_RATIO_SHIFT, + PCLK_RATIO_MASK, 0, &_lock); + clk_register_clkdev(clk, "apb_clk", NULL); + + clk = clk_register_gate(NULL, "dma_clk", "ahb_clk", 0, PERIP1_CLK_ENB, + DMA_CLK_ENB, 0, &_lock); + clk_register_clkdev(clk, NULL, "fc400000.dma"); + + clk = clk_register_gate(NULL, "fsmc_clk", "ahb_clk", 0, PERIP1_CLK_ENB, + FSMC_CLK_ENB, 0, &_lock); + clk_register_clkdev(clk, NULL, "d1800000.flash"); + + clk = clk_register_gate(NULL, "gmac_clk", "ahb_clk", 0, PERIP1_CLK_ENB, + GMAC_CLK_ENB, 0, &_lock); + clk_register_clkdev(clk, NULL, "gmac"); + + clk = clk_register_gate(NULL, "i2c_clk", "ahb_clk", 0, PERIP1_CLK_ENB, + I2C_CLK_ENB, 0, &_lock); + clk_register_clkdev(clk, NULL, "d0200000.i2c"); + + clk = clk_register_gate(NULL, "jpeg_clk", "ahb_clk", 0, PERIP1_CLK_ENB, + JPEG_CLK_ENB, 0, &_lock); + clk_register_clkdev(clk, NULL, "jpeg"); + + clk = clk_register_gate(NULL, "smi_clk", "ahb_clk", 0, PERIP1_CLK_ENB, + SMI_CLK_ENB, 0, &_lock); + clk_register_clkdev(clk, NULL, "fc000000.flash"); + + /* clock derived from apb clk */ + clk = clk_register_gate(NULL, "adc_clk", "apb_clk", 0, PERIP1_CLK_ENB, + ADC_CLK_ENB, 0, &_lock); + clk_register_clkdev(clk, NULL, "adc"); + + clk = clk_register_fixed_factor(NULL, "gpio0_clk", "apb_clk", 0, 1, 1); + clk_register_clkdev(clk, NULL, "f0100000.gpio"); + + clk = clk_register_gate(NULL, "gpio1_clk", "apb_clk", 0, PERIP1_CLK_ENB, + GPIO1_CLK_ENB, 0, &_lock); + clk_register_clkdev(clk, NULL, "fc980000.gpio"); + + clk = clk_register_gate(NULL, "gpio2_clk", "apb_clk", 0, PERIP1_CLK_ENB, + GPIO2_CLK_ENB, 0, &_lock); + clk_register_clkdev(clk, NULL, "d8100000.gpio"); + + clk = clk_register_gate(NULL, "ssp0_clk", "apb_clk", 0, PERIP1_CLK_ENB, + SSP0_CLK_ENB, 0, &_lock); + clk_register_clkdev(clk, NULL, "ssp-pl022.0"); + + clk = clk_register_gate(NULL, "ssp1_clk", "apb_clk", 0, PERIP1_CLK_ENB, + SSP1_CLK_ENB, 0, &_lock); + clk_register_clkdev(clk, NULL, "ssp-pl022.1"); + + clk = clk_register_gate(NULL, "ssp2_clk", "apb_clk", 0, PERIP1_CLK_ENB, + SSP2_CLK_ENB, 0, &_lock); + clk_register_clkdev(clk, NULL, "ssp-pl022.2"); +} -- cgit v1.2.3 From 30a0d03776ff2d7ee5ec72d515d8e3cc6d2f0c62 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Tue, 1 May 2012 18:09:22 +0530 Subject: SPEAr: Add SMI NOR partition info in dts files This patch adds NOR partitions in all SPEAr boards dts files. Signed-off-by: Viresh Kumar Acked-by: Arnd Bergmann Acked-by: Stefan Roese Signed-off-by: Arnd Bergmann --- arch/arm/boot/dts/spear300-evb.dts | 25 +++++++++++++++++++++++++ arch/arm/boot/dts/spear310-evb.dts | 20 ++++++++++++++++++-- arch/arm/boot/dts/spear320-evb.dts | 25 +++++++++++++++++++++++++ arch/arm/boot/dts/spear600-evb.dts | 29 +++++++++++++++++++++++++++++ 4 files changed, 97 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/spear300-evb.dts b/arch/arm/boot/dts/spear300-evb.dts index 6a79d69775b5..bf491a332145 100644 --- a/arch/arm/boot/dts/spear300-evb.dts +++ b/arch/arm/boot/dts/spear300-evb.dts @@ -49,6 +49,31 @@ smi: flash@fc000000 { status = "okay"; + clock-rate=<50000000>; + + flash@f8000000 { + #address-cells = <1>; + #size-cells = <1>; + reg = <0xf8000000 0x800000>; + st,smi-fast-mode; + + partition@0 { + label = "xloader"; + reg = <0x0 0x10000>; + }; + partition@10000 { + label = "u-boot"; + reg = <0x10000 0x40000>; + }; + partition@50000 { + label = "linux"; + reg = <0x50000 0x2c0000>; + }; + partition@310000 { + label = "rootfs"; + reg = <0x310000 0x4f0000>; + }; + }; }; spi0: spi@d0100000 { diff --git a/arch/arm/boot/dts/spear310-evb.dts b/arch/arm/boot/dts/spear310-evb.dts index c86af33f700e..f7ecb0c1c6e8 100644 --- a/arch/arm/boot/dts/spear310-evb.dts +++ b/arch/arm/boot/dts/spear310-evb.dts @@ -42,11 +42,27 @@ clock-rate=<50000000>; flash@f8000000 { - label = "m25p64"; - reg = <0xf8000000 0x800000>; #address-cells = <1>; #size-cells = <1>; + reg = <0xf8000000 0x800000>; st,smi-fast-mode; + + partition@0 { + label = "xloader"; + reg = <0x0 0x10000>; + }; + partition@10000 { + label = "u-boot"; + reg = <0x10000 0x40000>; + }; + partition@50000 { + label = "linux"; + reg = <0x50000 0x2c0000>; + }; + partition@310000 { + label = "rootfs"; + reg = <0x310000 0x4f0000>; + }; }; }; diff --git a/arch/arm/boot/dts/spear320-evb.dts b/arch/arm/boot/dts/spear320-evb.dts index d43de712e863..8fb59d805be3 100644 --- a/arch/arm/boot/dts/spear320-evb.dts +++ b/arch/arm/boot/dts/spear320-evb.dts @@ -49,6 +49,31 @@ smi: flash@fc000000 { status = "okay"; + clock-rate=<50000000>; + + flash@f8000000 { + #address-cells = <1>; + #size-cells = <1>; + reg = <0xf8000000 0x800000>; + st,smi-fast-mode; + + partition@0 { + label = "xloader"; + reg = <0x0 0x10000>; + }; + partition@10000 { + label = "u-boot"; + reg = <0x10000 0x40000>; + }; + partition@50000 { + label = "linux"; + reg = <0x50000 0x2c0000>; + }; + partition@310000 { + label = "rootfs"; + reg = <0x310000 0x4f0000>; + }; + }; }; spi0: spi@d0100000 { diff --git a/arch/arm/boot/dts/spear600-evb.dts b/arch/arm/boot/dts/spear600-evb.dts index 790a7a8a5ccd..1119c22c9a82 100644 --- a/arch/arm/boot/dts/spear600-evb.dts +++ b/arch/arm/boot/dts/spear600-evb.dts @@ -33,6 +33,35 @@ status = "okay"; }; + smi: flash@fc000000 { + status = "okay"; + clock-rate=<50000000>; + + flash@f8000000 { + #address-cells = <1>; + #size-cells = <1>; + reg = <0xf8000000 0x800000>; + st,smi-fast-mode; + + partition@0 { + label = "xloader"; + reg = <0x0 0x10000>; + }; + partition@10000 { + label = "u-boot"; + reg = <0x10000 0x40000>; + }; + partition@50000 { + label = "linux"; + reg = <0x50000 0x2c0000>; + }; + partition@310000 { + label = "rootfs"; + reg = <0x310000 0x4f0000>; + }; + }; + }; + apb { serial@d0000000 { status = "okay"; -- cgit v1.2.3 From f613e220aebfafb653f7ce264950c15c99e27f2a Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Tue, 1 May 2012 18:16:50 +0530 Subject: SPEAr: Update defconfigs This patch updates following configuration: - Update MTD specific configurations - Enables JFFS2 FS support - Updates 6xx defconfig, with recent changes done by Arnd in 6xx Kconfig Signed-off-by: Viresh Kumar Signed-off-by: Arnd Bergmann Acked-by: Stefan Roese --- arch/arm/configs/spear3xx_defconfig | 4 ++++ arch/arm/configs/spear6xx_defconfig | 5 ++++- 2 files changed, 8 insertions(+), 1 deletion(-) diff --git a/arch/arm/configs/spear3xx_defconfig b/arch/arm/configs/spear3xx_defconfig index 7ed42912d69a..865980c5f212 100644 --- a/arch/arm/configs/spear3xx_defconfig +++ b/arch/arm/configs/spear3xx_defconfig @@ -14,6 +14,9 @@ CONFIG_BINFMT_MISC=y CONFIG_NET=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_MTD=y +CONFIG_MTD_OF_PARTS=y +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLOCK=y CONFIG_MTD_NAND=y CONFIG_MTD_NAND_FSMC=y CONFIG_BLK_DEV_RAM=y @@ -73,6 +76,7 @@ CONFIG_MSDOS_FS=m CONFIG_VFAT_FS=m CONFIG_FAT_DEFAULT_IOCHARSET="ascii" CONFIG_TMPFS=y +CONFIG_JFFS2_FS=y CONFIG_NLS_DEFAULT="utf8" CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_ASCII=m diff --git a/arch/arm/configs/spear6xx_defconfig b/arch/arm/configs/spear6xx_defconfig index cf94bc73a0e0..a2a1265f86b6 100644 --- a/arch/arm/configs/spear6xx_defconfig +++ b/arch/arm/configs/spear6xx_defconfig @@ -8,11 +8,13 @@ CONFIG_MODVERSIONS=y CONFIG_PARTITION_ADVANCED=y CONFIG_PLAT_SPEAR=y CONFIG_ARCH_SPEAR6XX=y -CONFIG_BOARD_SPEAR600_DT=y CONFIG_BINFMT_MISC=y CONFIG_NET=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_MTD=y +CONFIG_MTD_OF_PARTS=y +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLOCK=y CONFIG_MTD_NAND=y CONFIG_MTD_NAND_FSMC=y CONFIG_BLK_DEV_RAM=y @@ -64,6 +66,7 @@ CONFIG_MSDOS_FS=m CONFIG_VFAT_FS=m CONFIG_FAT_DEFAULT_IOCHARSET="ascii" CONFIG_TMPFS=y +CONFIG_JFFS2_FS=y CONFIG_NLS_DEFAULT="utf8" CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_ASCII=m -- cgit v1.2.3 From b31e23726bb9d6cd8848fc539b23330769830110 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Thu, 19 Apr 2012 22:23:13 +0530 Subject: SPEAr13xx: Add header files This patch adds basic header files for SPEAr13xx Machines. Signed-off-by: Viresh Kumar --- arch/arm/mach-spear13xx/include/mach/debug-macro.S | 14 +++ arch/arm/mach-spear13xx/include/mach/dma.h | 128 +++++++++++++++++++++ arch/arm/mach-spear13xx/include/mach/generic.h | 49 ++++++++ arch/arm/mach-spear13xx/include/mach/gpio.h | 19 +++ arch/arm/mach-spear13xx/include/mach/hardware.h | 1 + arch/arm/mach-spear13xx/include/mach/irqs.h | 20 ++++ arch/arm/mach-spear13xx/include/mach/spear.h | 62 ++++++++++ .../include/mach/spear1310_misc_regs.h | 0 .../include/mach/spear1340_misc_regs.h | 0 arch/arm/mach-spear13xx/include/mach/timex.h | 19 +++ arch/arm/mach-spear13xx/include/mach/uncompress.h | 19 +++ 11 files changed, 331 insertions(+) create mode 100644 arch/arm/mach-spear13xx/include/mach/debug-macro.S create mode 100644 arch/arm/mach-spear13xx/include/mach/dma.h create mode 100644 arch/arm/mach-spear13xx/include/mach/generic.h create mode 100644 arch/arm/mach-spear13xx/include/mach/gpio.h create mode 100644 arch/arm/mach-spear13xx/include/mach/hardware.h create mode 100644 arch/arm/mach-spear13xx/include/mach/irqs.h create mode 100644 arch/arm/mach-spear13xx/include/mach/spear.h create mode 100644 arch/arm/mach-spear13xx/include/mach/spear1310_misc_regs.h create mode 100644 arch/arm/mach-spear13xx/include/mach/spear1340_misc_regs.h create mode 100644 arch/arm/mach-spear13xx/include/mach/timex.h create mode 100644 arch/arm/mach-spear13xx/include/mach/uncompress.h diff --git a/arch/arm/mach-spear13xx/include/mach/debug-macro.S b/arch/arm/mach-spear13xx/include/mach/debug-macro.S new file mode 100644 index 000000000000..ea1564609bd4 --- /dev/null +++ b/arch/arm/mach-spear13xx/include/mach/debug-macro.S @@ -0,0 +1,14 @@ +/* + * arch/arm/mach-spear13xx/include/mach/debug-macro.S + * + * Debugging macro include header spear13xx machine family + * + * Copyright (C) 2012 ST Microelectronics + * Viresh Kumar + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include diff --git a/arch/arm/mach-spear13xx/include/mach/dma.h b/arch/arm/mach-spear13xx/include/mach/dma.h new file mode 100644 index 000000000000..383ab04dc6c9 --- /dev/null +++ b/arch/arm/mach-spear13xx/include/mach/dma.h @@ -0,0 +1,128 @@ +/* + * arch/arm/mach-spear13xx/include/mach/dma.h + * + * DMA information for SPEAr13xx machine family + * + * Copyright (C) 2012 ST Microelectronics + * Viresh Kumar + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __MACH_DMA_H +#define __MACH_DMA_H + +/* request id of all the peripherals */ +enum dma_master_info { + /* Accessible from only one master */ + DMA_MASTER_MCIF = 0, + DMA_MASTER_FSMC = 1, + /* Accessible from both 0 & 1 */ + DMA_MASTER_MEMORY = 0, + DMA_MASTER_ADC = 0, + DMA_MASTER_UART0 = 0, + DMA_MASTER_SSP0 = 0, + DMA_MASTER_I2C0 = 0, + +#ifdef CONFIG_MACH_SPEAR1310 + /* Accessible from only one master */ + SPEAR1310_DMA_MASTER_JPEG = 1, + + /* Accessible from both 0 & 1 */ + SPEAR1310_DMA_MASTER_I2S = 0, + SPEAR1310_DMA_MASTER_UART1 = 0, + SPEAR1310_DMA_MASTER_UART2 = 0, + SPEAR1310_DMA_MASTER_UART3 = 0, + SPEAR1310_DMA_MASTER_UART4 = 0, + SPEAR1310_DMA_MASTER_UART5 = 0, + SPEAR1310_DMA_MASTER_I2C1 = 0, + SPEAR1310_DMA_MASTER_I2C2 = 0, + SPEAR1310_DMA_MASTER_I2C3 = 0, + SPEAR1310_DMA_MASTER_I2C4 = 0, + SPEAR1310_DMA_MASTER_I2C5 = 0, + SPEAR1310_DMA_MASTER_I2C6 = 0, + SPEAR1310_DMA_MASTER_I2C7 = 0, + SPEAR1310_DMA_MASTER_SSP1 = 0, +#endif + +#ifdef CONFIG_MACH_SPEAR1340 + /* Accessible from only one master */ + SPEAR1340_DMA_MASTER_I2S_PLAY = 1, + SPEAR1340_DMA_MASTER_I2S_REC = 1, + SPEAR1340_DMA_MASTER_I2C1 = 1, + SPEAR1340_DMA_MASTER_UART1 = 1, + + /* following are accessible from both master 0 & 1 */ + SPEAR1340_DMA_MASTER_SPDIF = 0, + SPEAR1340_DMA_MASTER_CAM = 1, + SPEAR1340_DMA_MASTER_VIDEO_IN = 0, + SPEAR1340_DMA_MASTER_MALI = 0, +#endif +}; + +enum request_id { + DMA_REQ_ADC = 0, + DMA_REQ_SSP0_TX = 4, + DMA_REQ_SSP0_RX = 5, + DMA_REQ_UART0_TX = 6, + DMA_REQ_UART0_RX = 7, + DMA_REQ_I2C0_TX = 8, + DMA_REQ_I2C0_RX = 9, + +#ifdef CONFIG_MACH_SPEAR1310 + SPEAR1310_DMA_REQ_FROM_JPEG = 2, + SPEAR1310_DMA_REQ_TO_JPEG = 3, + SPEAR1310_DMA_REQ_I2S_TX = 10, + SPEAR1310_DMA_REQ_I2S_RX = 11, + + SPEAR1310_DMA_REQ_I2C1_RX = 0, + SPEAR1310_DMA_REQ_I2C1_TX = 1, + SPEAR1310_DMA_REQ_I2C2_RX = 2, + SPEAR1310_DMA_REQ_I2C2_TX = 3, + SPEAR1310_DMA_REQ_I2C3_RX = 4, + SPEAR1310_DMA_REQ_I2C3_TX = 5, + SPEAR1310_DMA_REQ_I2C4_RX = 6, + SPEAR1310_DMA_REQ_I2C4_TX = 7, + SPEAR1310_DMA_REQ_I2C5_RX = 8, + SPEAR1310_DMA_REQ_I2C5_TX = 9, + SPEAR1310_DMA_REQ_I2C6_RX = 10, + SPEAR1310_DMA_REQ_I2C6_TX = 11, + SPEAR1310_DMA_REQ_UART1_RX = 12, + SPEAR1310_DMA_REQ_UART1_TX = 13, + SPEAR1310_DMA_REQ_UART2_RX = 14, + SPEAR1310_DMA_REQ_UART2_TX = 15, + SPEAR1310_DMA_REQ_UART5_RX = 16, + SPEAR1310_DMA_REQ_UART5_TX = 17, + SPEAR1310_DMA_REQ_SSP1_RX = 18, + SPEAR1310_DMA_REQ_SSP1_TX = 19, + SPEAR1310_DMA_REQ_I2C7_RX = 20, + SPEAR1310_DMA_REQ_I2C7_TX = 21, + SPEAR1310_DMA_REQ_UART3_RX = 28, + SPEAR1310_DMA_REQ_UART3_TX = 29, + SPEAR1310_DMA_REQ_UART4_RX = 30, + SPEAR1310_DMA_REQ_UART4_TX = 31, +#endif + +#ifdef CONFIG_MACH_SPEAR1340 + SPEAR1340_DMA_REQ_SPDIF_TX = 2, + SPEAR1340_DMA_REQ_SPDIF_RX = 3, + SPEAR1340_DMA_REQ_I2S_TX = 10, + SPEAR1340_DMA_REQ_I2S_RX = 11, + SPEAR1340_DMA_REQ_UART1_TX = 12, + SPEAR1340_DMA_REQ_UART1_RX = 13, + SPEAR1340_DMA_REQ_I2C1_TX = 14, + SPEAR1340_DMA_REQ_I2C1_RX = 15, + SPEAR1340_DMA_REQ_CAM0_EVEN = 0, + SPEAR1340_DMA_REQ_CAM0_ODD = 1, + SPEAR1340_DMA_REQ_CAM1_EVEN = 2, + SPEAR1340_DMA_REQ_CAM1_ODD = 3, + SPEAR1340_DMA_REQ_CAM2_EVEN = 4, + SPEAR1340_DMA_REQ_CAM2_ODD = 5, + SPEAR1340_DMA_REQ_CAM3_EVEN = 6, + SPEAR1340_DMA_REQ_CAM3_ODD = 7, +#endif +}; + +#endif /* __MACH_DMA_H */ diff --git a/arch/arm/mach-spear13xx/include/mach/generic.h b/arch/arm/mach-spear13xx/include/mach/generic.h new file mode 100644 index 000000000000..6d8c45b9f298 --- /dev/null +++ b/arch/arm/mach-spear13xx/include/mach/generic.h @@ -0,0 +1,49 @@ +/* + * arch/arm/mach-spear13xx/include/mach/generic.h + * + * spear13xx machine family generic header file + * + * Copyright (C) 2012 ST Microelectronics + * Viresh Kumar + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __MACH_GENERIC_H +#define __MACH_GENERIC_H + +#include +#include + +/* Add spear13xx structure declarations here */ +extern struct sys_timer spear13xx_timer; +extern struct pl022_ssp_controller pl022_plat_data; +extern struct dw_dma_platform_data dmac_plat_data; +extern struct dw_dma_slave cf_dma_priv; +extern struct dw_dma_slave nand_read_dma_priv; +extern struct dw_dma_slave nand_write_dma_priv; + +/* Add spear13xx family function declarations here */ +void __init spear_setup_of_timer(void); +void __init spear13xx_map_io(void); +void __init spear13xx_dt_init_irq(void); +void __init spear13xx_l2x0_init(void); +bool dw_dma_filter(struct dma_chan *chan, void *slave); +void spear_restart(char, const char *); +void spear13xx_secondary_startup(void); + +#ifdef CONFIG_MACH_SPEAR1310 +void __init spear1310_clk_init(void); +#else +static inline void spear1310_clk_init(void) {} +#endif + +#ifdef CONFIG_MACH_SPEAR1340 +void __init spear1340_clk_init(void); +#else +static inline void spear1340_clk_init(void) {} +#endif + +#endif /* __MACH_GENERIC_H */ diff --git a/arch/arm/mach-spear13xx/include/mach/gpio.h b/arch/arm/mach-spear13xx/include/mach/gpio.h new file mode 100644 index 000000000000..cd6f4f86a56b --- /dev/null +++ b/arch/arm/mach-spear13xx/include/mach/gpio.h @@ -0,0 +1,19 @@ +/* + * arch/arm/mach-spear13xx/include/mach/gpio.h + * + * GPIO macros for SPEAr13xx machine family + * + * Copyright (C) 2012 ST Microelectronics + * Viresh Kumar + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __MACH_GPIO_H +#define __MACH_GPIO_H + +#include + +#endif /* __MACH_GPIO_H */ diff --git a/arch/arm/mach-spear13xx/include/mach/hardware.h b/arch/arm/mach-spear13xx/include/mach/hardware.h new file mode 100644 index 000000000000..40a8c178f10d --- /dev/null +++ b/arch/arm/mach-spear13xx/include/mach/hardware.h @@ -0,0 +1 @@ +/* empty */ diff --git a/arch/arm/mach-spear13xx/include/mach/irqs.h b/arch/arm/mach-spear13xx/include/mach/irqs.h new file mode 100644 index 000000000000..f542a24aa5f2 --- /dev/null +++ b/arch/arm/mach-spear13xx/include/mach/irqs.h @@ -0,0 +1,20 @@ +/* + * arch/arm/mach-spear13xx/include/mach/irqs.h + * + * IRQ helper macros for spear13xx machine family + * + * Copyright (C) 2012 ST Microelectronics + * Viresh Kumar + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __MACH_IRQS_H +#define __MACH_IRQS_H + +#define IRQ_GIC_END 160 +#define NR_IRQS IRQ_GIC_END + +#endif /* __MACH_IRQS_H */ diff --git a/arch/arm/mach-spear13xx/include/mach/spear.h b/arch/arm/mach-spear13xx/include/mach/spear.h new file mode 100644 index 000000000000..30c57ef72686 --- /dev/null +++ b/arch/arm/mach-spear13xx/include/mach/spear.h @@ -0,0 +1,62 @@ +/* + * arch/arm/mach-spear13xx/include/mach/spear.h + * + * spear13xx Machine family specific definition + * + * Copyright (C) 2012 ST Microelectronics + * Viresh Kumar + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __MACH_SPEAR13XX_H +#define __MACH_SPEAR13XX_H + +#include + +#define PERIP_GRP2_BASE UL(0xB3000000) +#define VA_PERIP_GRP2_BASE UL(0xFE000000) +#define MCIF_SDHCI_BASE UL(0xB3000000) +#define SYSRAM0_BASE UL(0xB3800000) +#define VA_SYSRAM0_BASE UL(0xFE800000) +#define SYS_LOCATION (VA_SYSRAM0_BASE + 0x600) + +#define PERIP_GRP1_BASE UL(0xE0000000) +#define VA_PERIP_GRP1_BASE UL(0xFD000000) +#define UART_BASE UL(0xE0000000) +#define VA_UART_BASE UL(0xFD000000) +#define SSP_BASE UL(0xE0100000) +#define MISC_BASE UL(0xE0700000) +#define VA_MISC_BASE IOMEM(UL(0xFD700000)) + +#define A9SM_AND_MPMC_BASE UL(0xEC000000) +#define VA_A9SM_AND_MPMC_BASE UL(0xFC000000) + +/* A9SM peripheral offsets */ +#define A9SM_PERIP_BASE UL(0xEC800000) +#define VA_A9SM_PERIP_BASE UL(0xFC800000) +#define VA_SCU_BASE (VA_A9SM_PERIP_BASE + 0x00) + +#define L2CC_BASE UL(0xED000000) +#define VA_L2CC_BASE IOMEM(UL(0xFB000000)) + +/* others */ +#define DMAC0_BASE UL(0xEA800000) +#define DMAC1_BASE UL(0xEB000000) +#define MCIF_CF_BASE UL(0xB2800000) + +/* Devices present in SPEAr1310 */ +#ifdef CONFIG_MACH_SPEAR1310 +#define SPEAR1310_RAS_GRP1_BASE UL(0xD8000000) +#define VA_SPEAR1310_RAS_GRP1_BASE UL(0xFA000000) +#define SPEAR1310_RAS_BASE UL(0xD8400000) +#define VA_SPEAR1310_RAS_BASE IOMEM(UL(0xFA400000)) +#endif /* CONFIG_MACH_SPEAR1310 */ + +/* Debug uart for linux, will be used for debug and uncompress messages */ +#define SPEAR_DBG_UART_BASE UART_BASE +#define VA_SPEAR_DBG_UART_BASE VA_UART_BASE + +#endif /* __MACH_SPEAR13XX_H */ diff --git a/arch/arm/mach-spear13xx/include/mach/spear1310_misc_regs.h b/arch/arm/mach-spear13xx/include/mach/spear1310_misc_regs.h new file mode 100644 index 000000000000..e69de29bb2d1 diff --git a/arch/arm/mach-spear13xx/include/mach/spear1340_misc_regs.h b/arch/arm/mach-spear13xx/include/mach/spear1340_misc_regs.h new file mode 100644 index 000000000000..e69de29bb2d1 diff --git a/arch/arm/mach-spear13xx/include/mach/timex.h b/arch/arm/mach-spear13xx/include/mach/timex.h new file mode 100644 index 000000000000..31af3e8d976e --- /dev/null +++ b/arch/arm/mach-spear13xx/include/mach/timex.h @@ -0,0 +1,19 @@ +/* + * arch/arm/mach-spear3xx/include/mach/timex.h + * + * SPEAr3XX machine family specific timex definitions + * + * Copyright (C) 2012 ST Microelectronics + * Viresh Kumar + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __MACH_TIMEX_H +#define __MACH_TIMEX_H + +#include + +#endif /* __MACH_TIMEX_H */ diff --git a/arch/arm/mach-spear13xx/include/mach/uncompress.h b/arch/arm/mach-spear13xx/include/mach/uncompress.h new file mode 100644 index 000000000000..c7840896ae6e --- /dev/null +++ b/arch/arm/mach-spear13xx/include/mach/uncompress.h @@ -0,0 +1,19 @@ +/* + * arch/arm/mach-spear13xx/include/mach/uncompress.h + * + * Serial port stubs for kernel decompress status messages + * + * Copyright (C) 2012 ST Microelectronics + * Viresh Kumar + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __MACH_UNCOMPRESS_H +#define __MACH_UNCOMPRESS_H + +#include + +#endif /* __MACH_UNCOMPRESS_H */ -- cgit v1.2.3 From e3978dc7dfcb9e7b022bda775929943b43bdefd8 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Thu, 19 Apr 2012 22:23:13 +0530 Subject: SPEAr13xx: Add source files This patch adds source files for SPEAr13xx Machines. Signed-off-by: Viresh Kumar Signed-off-by: Deepak Sikri Signed-off-by: Shiraz Hashim --- arch/arm/mach-spear13xx/Kconfig | 18 ++++ arch/arm/mach-spear13xx/Makefile | 10 ++ arch/arm/mach-spear13xx/Makefile.boot | 6 ++ arch/arm/mach-spear13xx/headsmp.S | 47 ++++++++ arch/arm/mach-spear13xx/hotplug.c | 119 ++++++++++++++++++++ arch/arm/mach-spear13xx/platsmp.c | 127 ++++++++++++++++++++++ arch/arm/mach-spear13xx/spear1310.c | 88 +++++++++++++++ arch/arm/mach-spear13xx/spear1340.c | 192 +++++++++++++++++++++++++++++++++ arch/arm/mach-spear13xx/spear13xx.c | 197 ++++++++++++++++++++++++++++++++++ arch/arm/plat-spear/restart.c | 5 + 10 files changed, 809 insertions(+) create mode 100644 arch/arm/mach-spear13xx/Kconfig create mode 100644 arch/arm/mach-spear13xx/Makefile create mode 100644 arch/arm/mach-spear13xx/Makefile.boot create mode 100644 arch/arm/mach-spear13xx/headsmp.S create mode 100644 arch/arm/mach-spear13xx/hotplug.c create mode 100644 arch/arm/mach-spear13xx/platsmp.c create mode 100644 arch/arm/mach-spear13xx/spear1310.c create mode 100644 arch/arm/mach-spear13xx/spear1340.c create mode 100644 arch/arm/mach-spear13xx/spear13xx.c diff --git a/arch/arm/mach-spear13xx/Kconfig b/arch/arm/mach-spear13xx/Kconfig new file mode 100644 index 000000000000..138e8918f3e0 --- /dev/null +++ b/arch/arm/mach-spear13xx/Kconfig @@ -0,0 +1,18 @@ +# +# SPEAr13XX Machine configuration file +# + +if ARCH_SPEAR13XX + +menu "SPEAr13xx Implementations" +config MACH_SPEAR1310 + bool "SPEAr1310 Machine support with Device Tree" + help + Supports ST SPEAr1310 machine configured via the device-tree + +config MACH_SPEAR1340 + bool "SPEAr1340 Machine support with Device Tree" + help + Supports ST SPEAr1340 machine configured via the device-tree +endmenu +endif #ARCH_SPEAR13XX diff --git a/arch/arm/mach-spear13xx/Makefile b/arch/arm/mach-spear13xx/Makefile new file mode 100644 index 000000000000..3435ea78c15d --- /dev/null +++ b/arch/arm/mach-spear13xx/Makefile @@ -0,0 +1,10 @@ +# +# Makefile for SPEAr13XX machine series +# + +obj-$(CONFIG_SMP) += headsmp.o platsmp.o +obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o + +obj-$(CONFIG_ARCH_SPEAR13XX) += spear13xx.o +obj-$(CONFIG_MACH_SPEAR1310) += spear1310.o +obj-$(CONFIG_MACH_SPEAR1340) += spear1340.o diff --git a/arch/arm/mach-spear13xx/Makefile.boot b/arch/arm/mach-spear13xx/Makefile.boot new file mode 100644 index 000000000000..403efd7e6d27 --- /dev/null +++ b/arch/arm/mach-spear13xx/Makefile.boot @@ -0,0 +1,6 @@ +zreladdr-y += 0x00008000 +params_phys-y := 0x00000100 +initrd_phys-y := 0x00800000 + +dtb-$(CONFIG_MACH_SPEAR1310) += spear1310-evb.dtb +dtb-$(CONFIG_MACH_SPEAR1340) += spear1340-evb.dtb diff --git a/arch/arm/mach-spear13xx/headsmp.S b/arch/arm/mach-spear13xx/headsmp.S new file mode 100644 index 000000000000..ed85473a047f --- /dev/null +++ b/arch/arm/mach-spear13xx/headsmp.S @@ -0,0 +1,47 @@ +/* + * arch/arm/mach-spear13XX/headsmp.S + * + * Picked from realview + * Copyright (c) 2012 ST Microelectronics Limited + * Shiraz Hashim + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include + + __INIT + +/* + * spear13xx specific entry point for secondary CPUs. This provides + * a "holding pen" into which all secondary cores are held until we're + * ready for them to initialise. + */ +ENTRY(spear13xx_secondary_startup) + mrc p15, 0, r0, c0, c0, 5 + and r0, r0, #15 + adr r4, 1f + ldmia r4, {r5, r6} + sub r4, r4, r5 + add r6, r6, r4 +pen: ldr r7, [r6] + cmp r7, r0 + bne pen + + /* re-enable coherency */ + mrc p15, 0, r0, c1, c0, 1 + orr r0, r0, #(1 << 6) | (1 << 0) + mcr p15, 0, r0, c1, c0, 1 + /* + * we've been released from the holding pen: secondary_stack + * should now contain the SVC stack for this core + */ + b secondary_startup + + .align +1: .long . + .long pen_release +ENDPROC(spear13xx_secondary_startup) diff --git a/arch/arm/mach-spear13xx/hotplug.c b/arch/arm/mach-spear13xx/hotplug.c new file mode 100644 index 000000000000..5c6867b46d09 --- /dev/null +++ b/arch/arm/mach-spear13xx/hotplug.c @@ -0,0 +1,119 @@ +/* + * linux/arch/arm/mach-spear13xx/hotplug.c + * + * Copyright (C) 2012 ST Microelectronics Ltd. + * Deepak Sikri + * + * based upon linux/arch/arm/mach-realview/hotplug.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include +#include +#include +#include +#include +#include + +extern volatile int pen_release; + +static inline void cpu_enter_lowpower(void) +{ + unsigned int v; + + flush_cache_all(); + asm volatile( + " mcr p15, 0, %1, c7, c5, 0\n" + " dsb\n" + /* + * Turn off coherency + */ + " mrc p15, 0, %0, c1, c0, 1\n" + " bic %0, %0, #0x20\n" + " mcr p15, 0, %0, c1, c0, 1\n" + " mrc p15, 0, %0, c1, c0, 0\n" + " bic %0, %0, %2\n" + " mcr p15, 0, %0, c1, c0, 0\n" + : "=&r" (v) + : "r" (0), "Ir" (CR_C) + : "cc", "memory"); +} + +static inline void cpu_leave_lowpower(void) +{ + unsigned int v; + + asm volatile("mrc p15, 0, %0, c1, c0, 0\n" + " orr %0, %0, %1\n" + " mcr p15, 0, %0, c1, c0, 0\n" + " mrc p15, 0, %0, c1, c0, 1\n" + " orr %0, %0, #0x20\n" + " mcr p15, 0, %0, c1, c0, 1\n" + : "=&r" (v) + : "Ir" (CR_C) + : "cc"); +} + +static inline void platform_do_lowpower(unsigned int cpu, int *spurious) +{ + for (;;) { + wfi(); + + if (pen_release == cpu) { + /* + * OK, proper wakeup, we're done + */ + break; + } + + /* + * Getting here, means that we have come out of WFI without + * having been woken up - this shouldn't happen + * + * Just note it happening - when we're woken, we can report + * its occurrence. + */ + (*spurious)++; + } +} + +int platform_cpu_kill(unsigned int cpu) +{ + return 1; +} + +/* + * platform-specific code to shutdown a CPU + * + * Called with IRQs disabled + */ +void __cpuinit platform_cpu_die(unsigned int cpu) +{ + int spurious = 0; + + /* + * we're ready for shutdown now, so do it + */ + cpu_enter_lowpower(); + platform_do_lowpower(cpu, &spurious); + + /* + * bring this CPU back into the world of cache + * coherency, and then restore interrupts + */ + cpu_leave_lowpower(); + + if (spurious) + pr_warn("CPU%u: %u spurious wakeup calls\n", cpu, spurious); +} + +int platform_cpu_disable(unsigned int cpu) +{ + /* + * we don't allow CPU 0 to be shutdown (it is still too special + * e.g. clock tick interrupts) + */ + return cpu == 0 ? -EPERM : 0; +} diff --git a/arch/arm/mach-spear13xx/platsmp.c b/arch/arm/mach-spear13xx/platsmp.c new file mode 100644 index 000000000000..f5d07f2663d7 --- /dev/null +++ b/arch/arm/mach-spear13xx/platsmp.c @@ -0,0 +1,127 @@ +/* + * arch/arm/mach-spear13xx/platsmp.c + * + * based upon linux/arch/arm/mach-realview/platsmp.c + * + * Copyright (C) 2012 ST Microelectronics Ltd. + * Shiraz Hashim + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +/* + * control for which core is the next to come out of the secondary + * boot "holding pen" + */ +volatile int __cpuinitdata pen_release = -1; +static DEFINE_SPINLOCK(boot_lock); + +static void __iomem *scu_base = IOMEM(VA_SCU_BASE); +extern void spear13xx_secondary_startup(void); + +void __cpuinit platform_secondary_init(unsigned int cpu) +{ + /* + * if any interrupts are already enabled for the primary + * core (e.g. timer irq), then they will not have been enabled + * for us: do so + */ + gic_secondary_init(0); + + /* + * let the primary processor know we're out of the + * pen, then head off into the C entry point + */ + pen_release = -1; + smp_wmb(); + + /* + * Synchronise with the boot thread. + */ + spin_lock(&boot_lock); + spin_unlock(&boot_lock); +} + +int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle) +{ + unsigned long timeout; + + /* + * set synchronisation state between this boot processor + * and the secondary one + */ + spin_lock(&boot_lock); + + /* + * The secondary processor is waiting to be released from + * the holding pen - release it, then wait for it to flag + * that it has been released by resetting pen_release. + * + * Note that "pen_release" is the hardware CPU ID, whereas + * "cpu" is Linux's internal ID. + */ + pen_release = cpu; + flush_cache_all(); + outer_flush_all(); + + timeout = jiffies + (1 * HZ); + while (time_before(jiffies, timeout)) { + smp_rmb(); + if (pen_release == -1) + break; + + udelay(10); + } + + /* + * now the secondary core is starting up let it run its + * calibrations, then wait for it to finish + */ + spin_unlock(&boot_lock); + + return pen_release != -1 ? -ENOSYS : 0; +} + +/* + * Initialise the CPU possible map early - this describes the CPUs + * which may be present or become present in the system. + */ +void __init smp_init_cpus(void) +{ + unsigned int i, ncores = scu_get_core_count(scu_base); + + if (ncores > nr_cpu_ids) { + pr_warn("SMP: %u cores greater than maximum (%u), clipping\n", + ncores, nr_cpu_ids); + ncores = nr_cpu_ids; + } + + for (i = 0; i < ncores; i++) + set_cpu_possible(i, true); + + set_smp_cross_call(gic_raise_softirq); +} + +void __init platform_smp_prepare_cpus(unsigned int max_cpus) +{ + + scu_enable(scu_base); + + /* + * Write the address of secondary startup into the system-wide location + * (presently it is in SRAM). The BootMonitor waits until it receives a + * soft interrupt, and then the secondary CPU branches to this address. + */ + __raw_writel(virt_to_phys(spear13xx_secondary_startup), SYS_LOCATION); +} diff --git a/arch/arm/mach-spear13xx/spear1310.c b/arch/arm/mach-spear13xx/spear1310.c new file mode 100644 index 000000000000..fefd15b2f380 --- /dev/null +++ b/arch/arm/mach-spear13xx/spear1310.c @@ -0,0 +1,88 @@ +/* + * arch/arm/mach-spear13xx/spear1310.c + * + * SPEAr1310 machine source file + * + * Copyright (C) 2012 ST Microelectronics + * Viresh Kumar + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#define pr_fmt(fmt) "SPEAr1310: " fmt + +#include +#include +#include +#include +#include +#include +#include + +/* Base addresses */ +#define SPEAR1310_SSP1_BASE UL(0x5D400000) +#define SPEAR1310_SATA0_BASE UL(0xB1000000) +#define SPEAR1310_SATA1_BASE UL(0xB1800000) +#define SPEAR1310_SATA2_BASE UL(0xB4000000) + +/* ssp device registration */ +static struct pl022_ssp_controller ssp1_plat_data = { + .bus_id = 0, + .enable_dma = 0, + .num_chipselect = 3, +}; + +/* Add SPEAr1310 auxdata to pass platform data */ +static struct of_dev_auxdata spear1310_auxdata_lookup[] __initdata = { + OF_DEV_AUXDATA("arasan,cf-spear1340", MCIF_CF_BASE, NULL, &cf_dma_priv), + OF_DEV_AUXDATA("snps,dma-spear1340", DMAC0_BASE, NULL, &dmac_plat_data), + OF_DEV_AUXDATA("snps,dma-spear1340", DMAC1_BASE, NULL, &dmac_plat_data), + OF_DEV_AUXDATA("arm,pl022", SSP_BASE, NULL, &pl022_plat_data), + + OF_DEV_AUXDATA("arm,pl022", SPEAR1310_SSP1_BASE, NULL, &ssp1_plat_data), + {} +}; + +static void __init spear1310_dt_init(void) +{ + of_platform_populate(NULL, of_default_bus_match_table, + spear1310_auxdata_lookup, NULL); +} + +static const char * const spear1310_dt_board_compat[] = { + "st,spear1310", + "st,spear1310-evb", + NULL, +}; + +/* + * Following will create 16MB static virtual/physical mappings + * PHYSICAL VIRTUAL + * 0xD8000000 0xFA000000 + */ +struct map_desc spear1310_io_desc[] __initdata = { + { + .virtual = VA_SPEAR1310_RAS_GRP1_BASE, + .pfn = __phys_to_pfn(SPEAR1310_RAS_GRP1_BASE), + .length = SZ_16M, + .type = MT_DEVICE + }, +}; + +static void __init spear1310_map_io(void) +{ + iotable_init(spear1310_io_desc, ARRAY_SIZE(spear1310_io_desc)); + spear13xx_map_io(); +} + +DT_MACHINE_START(SPEAR1310_DT, "ST SPEAr1310 SoC with Flattened Device Tree") + .map_io = spear1310_map_io, + .init_irq = spear13xx_dt_init_irq, + .handle_irq = gic_handle_irq, + .timer = &spear13xx_timer, + .init_machine = spear1310_dt_init, + .restart = spear_restart, + .dt_compat = spear1310_dt_board_compat, +MACHINE_END diff --git a/arch/arm/mach-spear13xx/spear1340.c b/arch/arm/mach-spear13xx/spear1340.c new file mode 100644 index 000000000000..ee38cbc56869 --- /dev/null +++ b/arch/arm/mach-spear13xx/spear1340.c @@ -0,0 +1,192 @@ +/* + * arch/arm/mach-spear13xx/spear1340.c + * + * SPEAr1340 machine source file + * + * Copyright (C) 2012 ST Microelectronics + * Viresh Kumar + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#define pr_fmt(fmt) "SPEAr1340: " fmt + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* Base addresses */ +#define SPEAR1340_SATA_BASE UL(0xB1000000) +#define SPEAR1340_UART1_BASE UL(0xB4100000) + +/* Power Management Registers */ +#define SPEAR1340_PCM_CFG (VA_MISC_BASE + 0x100) +#define SPEAR1340_PCM_WKUP_CFG (VA_MISC_BASE + 0x104) +#define SPEAR1340_SWITCH_CTR (VA_MISC_BASE + 0x108) + +#define SPEAR1340_PERIP1_SW_RST (VA_MISC_BASE + 0x318) +#define SPEAR1340_PERIP2_SW_RST (VA_MISC_BASE + 0x31C) +#define SPEAR1340_PERIP3_SW_RST (VA_MISC_BASE + 0x320) + +/* PCIE - SATA configuration registers */ +#define SPEAR1340_PCIE_SATA_CFG (VA_MISC_BASE + 0x424) + /* PCIE CFG MASks */ + #define SPEAR1340_PCIE_CFG_DEVICE_PRESENT (1 << 11) + #define SPEAR1340_PCIE_CFG_POWERUP_RESET (1 << 10) + #define SPEAR1340_PCIE_CFG_CORE_CLK_EN (1 << 9) + #define SPEAR1340_PCIE_CFG_AUX_CLK_EN (1 << 8) + #define SPEAR1340_SATA_CFG_TX_CLK_EN (1 << 4) + #define SPEAR1340_SATA_CFG_RX_CLK_EN (1 << 3) + #define SPEAR1340_SATA_CFG_POWERUP_RESET (1 << 2) + #define SPEAR1340_SATA_CFG_PM_CLK_EN (1 << 1) + #define SPEAR1340_PCIE_SATA_SEL_PCIE (0) + #define SPEAR1340_PCIE_SATA_SEL_SATA (1) + #define SPEAR1340_SATA_PCIE_CFG_MASK 0xF1F + #define SPEAR1340_PCIE_CFG_VAL (SPEAR1340_PCIE_SATA_SEL_PCIE | \ + SPEAR1340_PCIE_CFG_AUX_CLK_EN | \ + SPEAR1340_PCIE_CFG_CORE_CLK_EN | \ + SPEAR1340_PCIE_CFG_POWERUP_RESET | \ + SPEAR1340_PCIE_CFG_DEVICE_PRESENT) + #define SPEAR1340_SATA_CFG_VAL (SPEAR1340_PCIE_SATA_SEL_SATA | \ + SPEAR1340_SATA_CFG_PM_CLK_EN | \ + SPEAR1340_SATA_CFG_POWERUP_RESET | \ + SPEAR1340_SATA_CFG_RX_CLK_EN | \ + SPEAR1340_SATA_CFG_TX_CLK_EN) + +#define SPEAR1340_PCIE_MIPHY_CFG (VA_MISC_BASE + 0x428) + #define SPEAR1340_MIPHY_OSC_BYPASS_EXT (1 << 31) + #define SPEAR1340_MIPHY_CLK_REF_DIV2 (1 << 27) + #define SPEAR1340_MIPHY_CLK_REF_DIV4 (2 << 27) + #define SPEAR1340_MIPHY_CLK_REF_DIV8 (3 << 27) + #define SPEAR1340_MIPHY_PLL_RATIO_TOP(x) (x << 0) + #define SPEAR1340_PCIE_SATA_MIPHY_CFG_SATA \ + (SPEAR1340_MIPHY_OSC_BYPASS_EXT | \ + SPEAR1340_MIPHY_CLK_REF_DIV2 | \ + SPEAR1340_MIPHY_PLL_RATIO_TOP(60)) + #define SPEAR1340_PCIE_SATA_MIPHY_CFG_SATA_25M_CRYSTAL_CLK \ + (SPEAR1340_MIPHY_PLL_RATIO_TOP(120)) + #define SPEAR1340_PCIE_SATA_MIPHY_CFG_PCIE \ + (SPEAR1340_MIPHY_OSC_BYPASS_EXT | \ + SPEAR1340_MIPHY_PLL_RATIO_TOP(25)) + +static struct dw_dma_slave uart1_dma_param[] = { + { + /* Tx */ + .cfg_hi = DWC_CFGH_DST_PER(SPEAR1340_DMA_REQ_UART1_TX), + .cfg_lo = 0, + .src_master = DMA_MASTER_MEMORY, + .dst_master = SPEAR1340_DMA_MASTER_UART1, + }, { + /* Rx */ + .cfg_hi = DWC_CFGH_SRC_PER(SPEAR1340_DMA_REQ_UART1_RX), + .cfg_lo = 0, + .src_master = SPEAR1340_DMA_MASTER_UART1, + .dst_master = DMA_MASTER_MEMORY, + } +}; + +static struct amba_pl011_data uart1_data = { + .dma_filter = dw_dma_filter, + .dma_tx_param = &uart1_dma_param[0], + .dma_rx_param = &uart1_dma_param[1], +}; + +/* SATA device registration */ +static int sata_miphy_init(struct device *dev, void __iomem *addr) +{ + writel(SPEAR1340_SATA_CFG_VAL, SPEAR1340_PCIE_SATA_CFG); + writel(SPEAR1340_PCIE_SATA_MIPHY_CFG_SATA_25M_CRYSTAL_CLK, + SPEAR1340_PCIE_MIPHY_CFG); + /* Switch on sata power domain */ + writel((readl(SPEAR1340_PCM_CFG) | (0x800)), SPEAR1340_PCM_CFG); + msleep(20); + /* Disable PCIE SATA Controller reset */ + writel((readl(SPEAR1340_PERIP1_SW_RST) & (~0x1000)), + SPEAR1340_PERIP1_SW_RST); + msleep(20); + + return 0; +} + +void sata_miphy_exit(struct device *dev) +{ + writel(0, SPEAR1340_PCIE_SATA_CFG); + writel(0, SPEAR1340_PCIE_MIPHY_CFG); + + /* Enable PCIE SATA Controller reset */ + writel((readl(SPEAR1340_PERIP1_SW_RST) | (0x1000)), + SPEAR1340_PERIP1_SW_RST); + msleep(20); + /* Switch off sata power domain */ + writel((readl(SPEAR1340_PCM_CFG) & (~0x800)), SPEAR1340_PCM_CFG); + msleep(20); +} + +int sata_suspend(struct device *dev) +{ + if (dev->power.power_state.event == PM_EVENT_FREEZE) + return 0; + + sata_miphy_exit(dev); + + return 0; +} + +int sata_resume(struct device *dev) +{ + if (dev->power.power_state.event == PM_EVENT_THAW) + return 0; + + return sata_miphy_init(dev, NULL); +} + +static struct ahci_platform_data sata_pdata = { + .init = sata_miphy_init, + .exit = sata_miphy_exit, + .suspend = sata_suspend, + .resume = sata_resume, +}; + +/* Add SPEAr1340 auxdata to pass platform data */ +static struct of_dev_auxdata spear1340_auxdata_lookup[] __initdata = { + OF_DEV_AUXDATA("arasan,cf-spear1340", MCIF_CF_BASE, NULL, &cf_dma_priv), + OF_DEV_AUXDATA("snps,dma-spear1340", DMAC0_BASE, NULL, &dmac_plat_data), + OF_DEV_AUXDATA("snps,dma-spear1340", DMAC1_BASE, NULL, &dmac_plat_data), + OF_DEV_AUXDATA("arm,pl022", SSP_BASE, NULL, &pl022_plat_data), + + OF_DEV_AUXDATA("snps,spear-ahci", SPEAR1340_SATA_BASE, NULL, + &sata_pdata), + OF_DEV_AUXDATA("arm,pl011", SPEAR1340_UART1_BASE, NULL, &uart1_data), + {} +}; + +static void __init spear1340_dt_init(void) +{ + of_platform_populate(NULL, of_default_bus_match_table, + spear1340_auxdata_lookup, NULL); +} + +static const char * const spear1340_dt_board_compat[] = { + "st,spear1340", + "st,spear1340-evb", + NULL, +}; + +DT_MACHINE_START(SPEAR1340_DT, "ST SPEAr1340 SoC with Flattened Device Tree") + .map_io = spear13xx_map_io, + .init_irq = spear13xx_dt_init_irq, + .handle_irq = gic_handle_irq, + .timer = &spear13xx_timer, + .init_machine = spear1340_dt_init, + .restart = spear_restart, + .dt_compat = spear1340_dt_board_compat, +MACHINE_END diff --git a/arch/arm/mach-spear13xx/spear13xx.c b/arch/arm/mach-spear13xx/spear13xx.c new file mode 100644 index 000000000000..50b349ae863d --- /dev/null +++ b/arch/arm/mach-spear13xx/spear13xx.c @@ -0,0 +1,197 @@ +/* + * arch/arm/mach-spear13xx/spear13xx.c + * + * SPEAr13XX machines common source file + * + * Copyright (C) 2012 ST Microelectronics + * Viresh Kumar + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#define pr_fmt(fmt) "SPEAr13xx: " fmt + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* common dw_dma filter routine to be used by peripherals */ +bool dw_dma_filter(struct dma_chan *chan, void *slave) +{ + struct dw_dma_slave *dws = (struct dw_dma_slave *)slave; + + if (chan->device->dev == dws->dma_dev) { + chan->private = slave; + return true; + } else { + return false; + } +} + +/* ssp device registration */ +static struct dw_dma_slave ssp_dma_param[] = { + { + /* Tx */ + .cfg_hi = DWC_CFGH_DST_PER(DMA_REQ_SSP0_TX), + .cfg_lo = 0, + .src_master = DMA_MASTER_MEMORY, + .dst_master = DMA_MASTER_SSP0, + }, { + /* Rx */ + .cfg_hi = DWC_CFGH_SRC_PER(DMA_REQ_SSP0_RX), + .cfg_lo = 0, + .src_master = DMA_MASTER_SSP0, + .dst_master = DMA_MASTER_MEMORY, + } +}; + +struct pl022_ssp_controller pl022_plat_data = { + .bus_id = 0, + .enable_dma = 1, + .dma_filter = dw_dma_filter, + .dma_rx_param = &ssp_dma_param[1], + .dma_tx_param = &ssp_dma_param[0], + .num_chipselect = 3, +}; + +/* CF device registration */ +struct dw_dma_slave cf_dma_priv = { + .cfg_hi = 0, + .cfg_lo = 0, + .src_master = 0, + .dst_master = 0, +}; + +/* dmac device registeration */ +struct dw_dma_platform_data dmac_plat_data = { + .nr_channels = 8, + .chan_allocation_order = CHAN_ALLOCATION_DESCENDING, + .chan_priority = CHAN_PRIORITY_DESCENDING, +}; + +void __init spear13xx_l2x0_init(void) +{ + /* + * 512KB (64KB/way), 8-way associativity, parity supported + * + * FIXME: 9th bit, of Auxillary Controller register must be set + * for some spear13xx devices for stable L2 operation. + * + * Enable Early BRESP, L2 prefetch for Instruction and Data, + * write alloc and 'Full line of zero' options + * + */ + + writel_relaxed(0x06, VA_L2CC_BASE + L2X0_PREFETCH_CTRL); + + /* + * Program following latencies in order to make + * SPEAr1340 work at 600 MHz + */ + writel_relaxed(0x221, VA_L2CC_BASE + L2X0_TAG_LATENCY_CTRL); + writel_relaxed(0x441, VA_L2CC_BASE + L2X0_DATA_LATENCY_CTRL); + l2x0_init(VA_L2CC_BASE, 0x70A60001, 0xfe00ffff); +} + +/* + * Following will create 16MB static virtual/physical mappings + * PHYSICAL VIRTUAL + * 0xB3000000 0xFE000000 + * 0xE0000000 0xFD000000 + * 0xEC000000 0xFC000000 + * 0xED000000 0xFB000000 + */ +struct map_desc spear13xx_io_desc[] __initdata = { + { + .virtual = VA_PERIP_GRP2_BASE, + .pfn = __phys_to_pfn(PERIP_GRP2_BASE), + .length = SZ_16M, + .type = MT_DEVICE + }, { + .virtual = VA_PERIP_GRP1_BASE, + .pfn = __phys_to_pfn(PERIP_GRP1_BASE), + .length = SZ_16M, + .type = MT_DEVICE + }, { + .virtual = VA_A9SM_AND_MPMC_BASE, + .pfn = __phys_to_pfn(A9SM_AND_MPMC_BASE), + .length = SZ_16M, + .type = MT_DEVICE + }, { + .virtual = (unsigned long)VA_L2CC_BASE, + .pfn = __phys_to_pfn(L2CC_BASE), + .length = SZ_4K, + .type = MT_DEVICE + }, +}; + +/* This will create static memory mapping for selected devices */ +void __init spear13xx_map_io(void) +{ + iotable_init(spear13xx_io_desc, ARRAY_SIZE(spear13xx_io_desc)); +} + +static void __init spear13xx_clk_init(void) +{ + if (of_machine_is_compatible("st,spear1310")) + spear1310_clk_init(); + else if (of_machine_is_compatible("st,spear1340")) + spear1340_clk_init(); + else + pr_err("%s: Unknown machine\n", __func__); +} + +static void __init spear13xx_timer_init(void) +{ + char pclk_name[] = "osc_24m_clk"; + struct clk *gpt_clk, *pclk; + + spear13xx_clk_init(); + + /* get the system timer clock */ + gpt_clk = clk_get_sys("gpt0", NULL); + if (IS_ERR(gpt_clk)) { + pr_err("%s:couldn't get clk for gpt\n", __func__); + BUG(); + } + + /* get the suitable parent clock for timer*/ + pclk = clk_get(NULL, pclk_name); + if (IS_ERR(pclk)) { + pr_err("%s:couldn't get %s as parent for gpt\n", __func__, + pclk_name); + BUG(); + } + + clk_set_parent(gpt_clk, pclk); + clk_put(gpt_clk); + clk_put(pclk); + + spear_setup_of_timer(); + twd_local_timer_of_register(); +} + +struct sys_timer spear13xx_timer = { + .init = spear13xx_timer_init, +}; + +static const struct of_device_id gic_of_match[] __initconst = { + { .compatible = "arm,cortex-a9-gic", .data = gic_of_init }, + { /* Sentinel */ } +}; + +void __init spear13xx_dt_init_irq(void) +{ + of_irq_init(gic_of_match); +} diff --git a/arch/arm/plat-spear/restart.c b/arch/arm/plat-spear/restart.c index 4471a232713a..ea0a61302b7e 100644 --- a/arch/arm/plat-spear/restart.c +++ b/arch/arm/plat-spear/restart.c @@ -16,6 +16,7 @@ #include #include +#define SPEAR13XX_SYS_SW_RES (VA_MISC_BASE + 0x204) void spear_restart(char mode, const char *cmd) { if (mode == 's') { @@ -23,6 +24,10 @@ void spear_restart(char mode, const char *cmd) soft_restart(0); } else { /* hardware reset, Use on-chip reset capability */ +#ifdef CONFIG_ARCH_SPEAR13XX + writel_relaxed(0x01, SPEAR13XX_SYS_SW_RES); +#else sysctl_soft_reset((void __iomem *)VA_SPEAR_SYS_CTRL_BASE); +#endif } } -- cgit v1.2.3 From 0b928af1f40f152dd6469f32b7792480048e6b44 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Thu, 19 Apr 2012 22:23:13 +0530 Subject: SPEAr13xx: Add common clock framework support This patch adds SPEAr1310 and SPEAr1340's clock framework support. It is based on earlier support for SPEAr3xx family. Signed-off-by: Viresh Kumar Reviewed-by: Mike Turquette --- drivers/clk/spear/Makefile | 2 + drivers/clk/spear/spear1310_clock.c | 1106 +++++++++++++++++++++++++++++++++++ drivers/clk/spear/spear1340_clock.c | 964 ++++++++++++++++++++++++++++++ 3 files changed, 2072 insertions(+) create mode 100644 drivers/clk/spear/spear1310_clock.c create mode 100644 drivers/clk/spear/spear1340_clock.c diff --git a/drivers/clk/spear/Makefile b/drivers/clk/spear/Makefile index 335886049c83..cdb425d3b8ee 100644 --- a/drivers/clk/spear/Makefile +++ b/drivers/clk/spear/Makefile @@ -6,3 +6,5 @@ obj-y += clk.o clk-aux-synth.o clk-frac-synth.o clk-gpt-synth.o clk-vco-pll.o obj-$(CONFIG_ARCH_SPEAR3XX) += spear3xx_clock.o obj-$(CONFIG_ARCH_SPEAR6XX) += spear6xx_clock.o +obj-$(CONFIG_MACH_SPEAR1310) += spear1310_clock.o +obj-$(CONFIG_MACH_SPEAR1340) += spear1340_clock.o diff --git a/drivers/clk/spear/spear1310_clock.c b/drivers/clk/spear/spear1310_clock.c new file mode 100644 index 000000000000..42b68df9aeef --- /dev/null +++ b/drivers/clk/spear/spear1310_clock.c @@ -0,0 +1,1106 @@ +/* + * arch/arm/mach-spear13xx/spear1310_clock.c + * + * SPEAr1310 machine clock framework source file + * + * Copyright (C) 2012 ST Microelectronics + * Viresh Kumar + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include +#include +#include +#include +#include +#include +#include +#include "clk.h" + +/* PLL related registers and bit values */ +#define SPEAR1310_PLL_CFG (VA_MISC_BASE + 0x210) + /* PLL_CFG bit values */ + #define SPEAR1310_CLCD_SYNT_CLK_MASK 1 + #define SPEAR1310_CLCD_SYNT_CLK_SHIFT 31 + #define SPEAR1310_RAS_SYNT2_3_CLK_MASK 2 + #define SPEAR1310_RAS_SYNT2_3_CLK_SHIFT 29 + #define SPEAR1310_RAS_SYNT_CLK_MASK 2 + #define SPEAR1310_RAS_SYNT0_1_CLK_SHIFT 27 + #define SPEAR1310_PLL_CLK_MASK 2 + #define SPEAR1310_PLL3_CLK_SHIFT 24 + #define SPEAR1310_PLL2_CLK_SHIFT 22 + #define SPEAR1310_PLL1_CLK_SHIFT 20 + +#define SPEAR1310_PLL1_CTR (VA_MISC_BASE + 0x214) +#define SPEAR1310_PLL1_FRQ (VA_MISC_BASE + 0x218) +#define SPEAR1310_PLL2_CTR (VA_MISC_BASE + 0x220) +#define SPEAR1310_PLL2_FRQ (VA_MISC_BASE + 0x224) +#define SPEAR1310_PLL3_CTR (VA_MISC_BASE + 0x22C) +#define SPEAR1310_PLL3_FRQ (VA_MISC_BASE + 0x230) +#define SPEAR1310_PLL4_CTR (VA_MISC_BASE + 0x238) +#define SPEAR1310_PLL4_FRQ (VA_MISC_BASE + 0x23C) +#define SPEAR1310_PERIP_CLK_CFG (VA_MISC_BASE + 0x244) + /* PERIP_CLK_CFG bit values */ + #define SPEAR1310_GPT_OSC24_VAL 0 + #define SPEAR1310_GPT_APB_VAL 1 + #define SPEAR1310_GPT_CLK_MASK 1 + #define SPEAR1310_GPT3_CLK_SHIFT 11 + #define SPEAR1310_GPT2_CLK_SHIFT 10 + #define SPEAR1310_GPT1_CLK_SHIFT 9 + #define SPEAR1310_GPT0_CLK_SHIFT 8 + #define SPEAR1310_UART_CLK_PLL5_VAL 0 + #define SPEAR1310_UART_CLK_OSC24_VAL 1 + #define SPEAR1310_UART_CLK_SYNT_VAL 2 + #define SPEAR1310_UART_CLK_MASK 2 + #define SPEAR1310_UART_CLK_SHIFT 4 + + #define SPEAR1310_AUX_CLK_PLL5_VAL 0 + #define SPEAR1310_AUX_CLK_SYNT_VAL 1 + #define SPEAR1310_CLCD_CLK_MASK 2 + #define SPEAR1310_CLCD_CLK_SHIFT 2 + #define SPEAR1310_C3_CLK_MASK 1 + #define SPEAR1310_C3_CLK_SHIFT 1 + +#define SPEAR1310_GMAC_CLK_CFG (VA_MISC_BASE + 0x248) + #define SPEAR1310_GMAC_PHY_IF_SEL_MASK 3 + #define SPEAR1310_GMAC_PHY_IF_SEL_SHIFT 4 + #define SPEAR1310_GMAC_PHY_CLK_MASK 1 + #define SPEAR1310_GMAC_PHY_CLK_SHIFT 3 + #define SPEAR1310_GMAC_PHY_INPUT_CLK_MASK 2 + #define SPEAR1310_GMAC_PHY_INPUT_CLK_SHIFT 1 + +#define SPEAR1310_I2S_CLK_CFG (VA_MISC_BASE + 0x24C) + /* I2S_CLK_CFG register mask */ + #define SPEAR1310_I2S_SCLK_X_MASK 0x1F + #define SPEAR1310_I2S_SCLK_X_SHIFT 27 + #define SPEAR1310_I2S_SCLK_Y_MASK 0x1F + #define SPEAR1310_I2S_SCLK_Y_SHIFT 22 + #define SPEAR1310_I2S_SCLK_EQ_SEL_SHIFT 21 + #define SPEAR1310_I2S_SCLK_SYNTH_ENB 20 + #define SPEAR1310_I2S_PRS1_CLK_X_MASK 0xFF + #define SPEAR1310_I2S_PRS1_CLK_X_SHIFT 12 + #define SPEAR1310_I2S_PRS1_CLK_Y_MASK 0xFF + #define SPEAR1310_I2S_PRS1_CLK_Y_SHIFT 4 + #define SPEAR1310_I2S_PRS1_EQ_SEL_SHIFT 3 + #define SPEAR1310_I2S_REF_SEL_MASK 1 + #define SPEAR1310_I2S_REF_SHIFT 2 + #define SPEAR1310_I2S_SRC_CLK_MASK 2 + #define SPEAR1310_I2S_SRC_CLK_SHIFT 0 + +#define SPEAR1310_C3_CLK_SYNT (VA_MISC_BASE + 0x250) +#define SPEAR1310_UART_CLK_SYNT (VA_MISC_BASE + 0x254) +#define SPEAR1310_GMAC_CLK_SYNT (VA_MISC_BASE + 0x258) +#define SPEAR1310_SDHCI_CLK_SYNT (VA_MISC_BASE + 0x25C) +#define SPEAR1310_CFXD_CLK_SYNT (VA_MISC_BASE + 0x260) +#define SPEAR1310_ADC_CLK_SYNT (VA_MISC_BASE + 0x264) +#define SPEAR1310_AMBA_CLK_SYNT (VA_MISC_BASE + 0x268) +#define SPEAR1310_CLCD_CLK_SYNT (VA_MISC_BASE + 0x270) +#define SPEAR1310_RAS_CLK_SYNT0 (VA_MISC_BASE + 0x280) +#define SPEAR1310_RAS_CLK_SYNT1 (VA_MISC_BASE + 0x288) +#define SPEAR1310_RAS_CLK_SYNT2 (VA_MISC_BASE + 0x290) +#define SPEAR1310_RAS_CLK_SYNT3 (VA_MISC_BASE + 0x298) + /* Check Fractional synthesizer reg masks */ + +#define SPEAR1310_PERIP1_CLK_ENB (VA_MISC_BASE + 0x300) + /* PERIP1_CLK_ENB register masks */ + #define SPEAR1310_RTC_CLK_ENB 31 + #define SPEAR1310_ADC_CLK_ENB 30 + #define SPEAR1310_C3_CLK_ENB 29 + #define SPEAR1310_JPEG_CLK_ENB 28 + #define SPEAR1310_CLCD_CLK_ENB 27 + #define SPEAR1310_DMA_CLK_ENB 25 + #define SPEAR1310_GPIO1_CLK_ENB 24 + #define SPEAR1310_GPIO0_CLK_ENB 23 + #define SPEAR1310_GPT1_CLK_ENB 22 + #define SPEAR1310_GPT0_CLK_ENB 21 + #define SPEAR1310_I2S0_CLK_ENB 20 + #define SPEAR1310_I2S1_CLK_ENB 19 + #define SPEAR1310_I2C0_CLK_ENB 18 + #define SPEAR1310_SSP_CLK_ENB 17 + #define SPEAR1310_UART_CLK_ENB 15 + #define SPEAR1310_PCIE_SATA_2_CLK_ENB 14 + #define SPEAR1310_PCIE_SATA_1_CLK_ENB 13 + #define SPEAR1310_PCIE_SATA_0_CLK_ENB 12 + #define SPEAR1310_UOC_CLK_ENB 11 + #define SPEAR1310_UHC1_CLK_ENB 10 + #define SPEAR1310_UHC0_CLK_ENB 9 + #define SPEAR1310_GMAC_CLK_ENB 8 + #define SPEAR1310_CFXD_CLK_ENB 7 + #define SPEAR1310_SDHCI_CLK_ENB 6 + #define SPEAR1310_SMI_CLK_ENB 5 + #define SPEAR1310_FSMC_CLK_ENB 4 + #define SPEAR1310_SYSRAM0_CLK_ENB 3 + #define SPEAR1310_SYSRAM1_CLK_ENB 2 + #define SPEAR1310_SYSROM_CLK_ENB 1 + #define SPEAR1310_BUS_CLK_ENB 0 + +#define SPEAR1310_PERIP2_CLK_ENB (VA_MISC_BASE + 0x304) + /* PERIP2_CLK_ENB register masks */ + #define SPEAR1310_THSENS_CLK_ENB 8 + #define SPEAR1310_I2S_REF_PAD_CLK_ENB 7 + #define SPEAR1310_ACP_CLK_ENB 6 + #define SPEAR1310_GPT3_CLK_ENB 5 + #define SPEAR1310_GPT2_CLK_ENB 4 + #define SPEAR1310_KBD_CLK_ENB 3 + #define SPEAR1310_CPU_DBG_CLK_ENB 2 + #define SPEAR1310_DDR_CORE_CLK_ENB 1 + #define SPEAR1310_DDR_CTRL_CLK_ENB 0 + +#define SPEAR1310_RAS_CLK_ENB (VA_MISC_BASE + 0x310) + /* RAS_CLK_ENB register masks */ + #define SPEAR1310_SYNT3_CLK_ENB 17 + #define SPEAR1310_SYNT2_CLK_ENB 16 + #define SPEAR1310_SYNT1_CLK_ENB 15 + #define SPEAR1310_SYNT0_CLK_ENB 14 + #define SPEAR1310_PCLK3_CLK_ENB 13 + #define SPEAR1310_PCLK2_CLK_ENB 12 + #define SPEAR1310_PCLK1_CLK_ENB 11 + #define SPEAR1310_PCLK0_CLK_ENB 10 + #define SPEAR1310_PLL3_CLK_ENB 9 + #define SPEAR1310_PLL2_CLK_ENB 8 + #define SPEAR1310_C125M_PAD_CLK_ENB 7 + #define SPEAR1310_C30M_CLK_ENB 6 + #define SPEAR1310_C48M_CLK_ENB 5 + #define SPEAR1310_OSC_25M_CLK_ENB 4 + #define SPEAR1310_OSC_32K_CLK_ENB 3 + #define SPEAR1310_OSC_24M_CLK_ENB 2 + #define SPEAR1310_PCLK_CLK_ENB 1 + #define SPEAR1310_ACLK_CLK_ENB 0 + +/* RAS Area Control Register */ +#define SPEAR1310_RAS_CTRL_REG0 (VA_SPEAR1310_RAS_BASE + 0x000) + #define SPEAR1310_SSP1_CLK_MASK 3 + #define SPEAR1310_SSP1_CLK_SHIFT 26 + #define SPEAR1310_TDM_CLK_MASK 1 + #define SPEAR1310_TDM2_CLK_SHIFT 24 + #define SPEAR1310_TDM1_CLK_SHIFT 23 + #define SPEAR1310_I2C_CLK_MASK 1 + #define SPEAR1310_I2C7_CLK_SHIFT 22 + #define SPEAR1310_I2C6_CLK_SHIFT 21 + #define SPEAR1310_I2C5_CLK_SHIFT 20 + #define SPEAR1310_I2C4_CLK_SHIFT 19 + #define SPEAR1310_I2C3_CLK_SHIFT 18 + #define SPEAR1310_I2C2_CLK_SHIFT 17 + #define SPEAR1310_I2C1_CLK_SHIFT 16 + #define SPEAR1310_GPT64_CLK_MASK 1 + #define SPEAR1310_GPT64_CLK_SHIFT 15 + #define SPEAR1310_RAS_UART_CLK_MASK 1 + #define SPEAR1310_UART5_CLK_SHIFT 14 + #define SPEAR1310_UART4_CLK_SHIFT 13 + #define SPEAR1310_UART3_CLK_SHIFT 12 + #define SPEAR1310_UART2_CLK_SHIFT 11 + #define SPEAR1310_UART1_CLK_SHIFT 10 + #define SPEAR1310_PCI_CLK_MASK 1 + #define SPEAR1310_PCI_CLK_SHIFT 0 + +#define SPEAR1310_RAS_CTRL_REG1 (VA_SPEAR1310_RAS_BASE + 0x004) + #define SPEAR1310_PHY_CLK_MASK 0x3 + #define SPEAR1310_RMII_PHY_CLK_SHIFT 0 + #define SPEAR1310_SMII_RGMII_PHY_CLK_SHIFT 2 + +#define SPEAR1310_RAS_SW_CLK_CTRL (VA_SPEAR1310_RAS_BASE + 0x0148) + #define SPEAR1310_CAN1_CLK_ENB 25 + #define SPEAR1310_CAN0_CLK_ENB 24 + #define SPEAR1310_GPT64_CLK_ENB 23 + #define SPEAR1310_SSP1_CLK_ENB 22 + #define SPEAR1310_I2C7_CLK_ENB 21 + #define SPEAR1310_I2C6_CLK_ENB 20 + #define SPEAR1310_I2C5_CLK_ENB 19 + #define SPEAR1310_I2C4_CLK_ENB 18 + #define SPEAR1310_I2C3_CLK_ENB 17 + #define SPEAR1310_I2C2_CLK_ENB 16 + #define SPEAR1310_I2C1_CLK_ENB 15 + #define SPEAR1310_UART5_CLK_ENB 14 + #define SPEAR1310_UART4_CLK_ENB 13 + #define SPEAR1310_UART3_CLK_ENB 12 + #define SPEAR1310_UART2_CLK_ENB 11 + #define SPEAR1310_UART1_CLK_ENB 10 + #define SPEAR1310_RS485_1_CLK_ENB 9 + #define SPEAR1310_RS485_0_CLK_ENB 8 + #define SPEAR1310_TDM2_CLK_ENB 7 + #define SPEAR1310_TDM1_CLK_ENB 6 + #define SPEAR1310_PCI_CLK_ENB 5 + #define SPEAR1310_GMII_CLK_ENB 4 + #define SPEAR1310_MII2_CLK_ENB 3 + #define SPEAR1310_MII1_CLK_ENB 2 + #define SPEAR1310_MII0_CLK_ENB 1 + #define SPEAR1310_ESRAM_CLK_ENB 0 + +static DEFINE_SPINLOCK(_lock); + +/* pll rate configuration table, in ascending order of rates */ +static struct pll_rate_tbl pll_rtbl[] = { + /* PCLK 24MHz */ + {.mode = 0, .m = 0x83, .n = 0x04, .p = 0x5}, /* vco 1572, pll 49.125 MHz */ + {.mode = 0, .m = 0x7D, .n = 0x06, .p = 0x3}, /* vco 1000, pll 125 MHz */ + {.mode = 0, .m = 0x64, .n = 0x06, .p = 0x1}, /* vco 800, pll 400 MHz */ + {.mode = 0, .m = 0x7D, .n = 0x06, .p = 0x1}, /* vco 1000, pll 500 MHz */ + {.mode = 0, .m = 0xA6, .n = 0x06, .p = 0x1}, /* vco 1328, pll 664 MHz */ + {.mode = 0, .m = 0xC8, .n = 0x06, .p = 0x1}, /* vco 1600, pll 800 MHz */ + {.mode = 0, .m = 0x7D, .n = 0x06, .p = 0x0}, /* vco 1, pll 1 GHz */ +}; + +/* vco-pll4 rate configuration table, in ascending order of rates */ +static struct pll_rate_tbl pll4_rtbl[] = { + {.mode = 0, .m = 0x7D, .n = 0x06, .p = 0x2}, /* vco 1000, pll 250 MHz */ + {.mode = 0, .m = 0xA6, .n = 0x06, .p = 0x2}, /* vco 1328, pll 332 MHz */ + {.mode = 0, .m = 0xC8, .n = 0x06, .p = 0x2}, /* vco 1600, pll 400 MHz */ + {.mode = 0, .m = 0x7D, .n = 0x06, .p = 0x0}, /* vco 1, pll 1 GHz */ +}; + +/* aux rate configuration table, in ascending order of rates */ +static struct aux_rate_tbl aux_rtbl[] = { + /* For VCO1div2 = 500 MHz */ + {.xscale = 10, .yscale = 204, .eq = 0}, /* 12.29 MHz */ + {.xscale = 4, .yscale = 21, .eq = 0}, /* 48 MHz */ + {.xscale = 2, .yscale = 6, .eq = 0}, /* 83 MHz */ + {.xscale = 2, .yscale = 4, .eq = 0}, /* 125 MHz */ + {.xscale = 1, .yscale = 3, .eq = 1}, /* 166 MHz */ + {.xscale = 1, .yscale = 2, .eq = 1}, /* 250 MHz */ +}; + +/* gmac rate configuration table, in ascending order of rates */ +static struct aux_rate_tbl gmac_rtbl[] = { + /* For gmac phy input clk */ + {.xscale = 2, .yscale = 6, .eq = 0}, /* divided by 6 */ + {.xscale = 2, .yscale = 4, .eq = 0}, /* divided by 4 */ + {.xscale = 1, .yscale = 3, .eq = 1}, /* divided by 3 */ + {.xscale = 1, .yscale = 2, .eq = 1}, /* divided by 2 */ +}; + +/* clcd rate configuration table, in ascending order of rates */ +static struct frac_rate_tbl clcd_rtbl[] = { + {.div = 0x14000}, /* 25 Mhz , for vc01div4 = 250 MHz*/ + {.div = 0x1284B}, /* 27 Mhz , for vc01div4 = 250 MHz*/ + {.div = 0x0D8D3}, /* 58 Mhz , for vco1div4 = 393 MHz */ + {.div = 0x0B72C}, /* 58 Mhz , for vco1div4 = 332 MHz */ + {.div = 0x089EE}, /* 58 Mhz , for vc01div4 = 250 MHz*/ + {.div = 0x06f1C}, /* 72 Mhz , for vc01div4 = 250 MHz*/ + {.div = 0x06E58}, /* 58 Mhz , for vco1div4 = 200 MHz */ + {.div = 0x06c1B}, /* 74 Mhz , for vc01div4 = 250 MHz*/ + {.div = 0x04A12}, /* 108 Mhz , for vc01div4 = 250 MHz*/ + {.div = 0x0378E}, /* 144 Mhz , for vc01div4 = 250 MHz*/ +}; + +/* i2s prescaler1 masks */ +static struct aux_clk_masks i2s_prs1_masks = { + .eq_sel_mask = AUX_EQ_SEL_MASK, + .eq_sel_shift = SPEAR1310_I2S_PRS1_EQ_SEL_SHIFT, + .eq1_mask = AUX_EQ1_SEL, + .eq2_mask = AUX_EQ2_SEL, + .xscale_sel_mask = SPEAR1310_I2S_PRS1_CLK_X_MASK, + .xscale_sel_shift = SPEAR1310_I2S_PRS1_CLK_X_SHIFT, + .yscale_sel_mask = SPEAR1310_I2S_PRS1_CLK_Y_MASK, + .yscale_sel_shift = SPEAR1310_I2S_PRS1_CLK_Y_SHIFT, +}; + +/* i2s sclk (bit clock) syynthesizers masks */ +static struct aux_clk_masks i2s_sclk_masks = { + .eq_sel_mask = AUX_EQ_SEL_MASK, + .eq_sel_shift = SPEAR1310_I2S_SCLK_EQ_SEL_SHIFT, + .eq1_mask = AUX_EQ1_SEL, + .eq2_mask = AUX_EQ2_SEL, + .xscale_sel_mask = SPEAR1310_I2S_SCLK_X_MASK, + .xscale_sel_shift = SPEAR1310_I2S_SCLK_X_SHIFT, + .yscale_sel_mask = SPEAR1310_I2S_SCLK_Y_MASK, + .yscale_sel_shift = SPEAR1310_I2S_SCLK_Y_SHIFT, + .enable_bit = SPEAR1310_I2S_SCLK_SYNTH_ENB, +}; + +/* i2s prs1 aux rate configuration table, in ascending order of rates */ +static struct aux_rate_tbl i2s_prs1_rtbl[] = { + /* For parent clk = 49.152 MHz */ + {.xscale = 1, .yscale = 2, .eq = 0}, /* 12.288 MHz */ +}; + +/* i2s sclk aux rate configuration table, in ascending order of rates */ +static struct aux_rate_tbl i2s_sclk_rtbl[] = { + /* For i2s_ref_clk = 12.288MHz */ + {.xscale = 1, .yscale = 4, .eq = 0}, /* 1.53 MHz */ + {.xscale = 1, .yscale = 2, .eq = 0}, /* 3.07 Mhz */ +}; + +/* adc rate configuration table, in ascending order of rates */ +/* possible adc range is 2.5 MHz to 20 MHz. */ +static struct aux_rate_tbl adc_rtbl[] = { + /* For ahb = 166.67 MHz */ + {.xscale = 1, .yscale = 31, .eq = 0}, /* 2.68 MHz */ + {.xscale = 2, .yscale = 21, .eq = 0}, /* 7.94 MHz */ + {.xscale = 4, .yscale = 21, .eq = 0}, /* 15.87 MHz */ + {.xscale = 10, .yscale = 42, .eq = 0}, /* 19.84 MHz */ +}; + +/* General synth rate configuration table, in ascending order of rates */ +static struct frac_rate_tbl gen_rtbl[] = { + /* For vco1div4 = 250 MHz */ + {.div = 0x14000}, /* 25 MHz */ + {.div = 0x0A000}, /* 50 MHz */ + {.div = 0x05000}, /* 100 MHz */ + {.div = 0x02000}, /* 250 MHz */ +}; + +/* clock parents */ +static const char *vco_parents[] = { "osc_24m_clk", "osc_25m_clk", }; +static const char *gpt_parents[] = { "osc_24m_clk", "apb_clk", }; +static const char *uart0_parents[] = { "pll5_clk", "uart_synth_gate_clk", }; +static const char *c3_parents[] = { "pll5_clk", "c3_synth_gate_clk", }; +static const char *gmac_phy_input_parents[] = { "gmii_125m_pad_clk", "pll2_clk", + "osc_25m_clk", }; +static const char *gmac_phy_parents[] = { "gmac_phy_input_mux_clk", + "gmac_phy_synth_gate_clk", }; +static const char *clcd_synth_parents[] = { "vco1div4_clk", "pll2_clk", }; +static const char *clcd_pixel_parents[] = { "pll5_clk", "clcd_synth_clk", }; +static const char *i2s_src_parents[] = { "vco1div2_clk", "none", "pll3_clk", + "i2s_src_pad_clk", }; +static const char *i2s_ref_parents[] = { "i2s_src_mux_clk", "i2s_prs1_clk", }; +static const char *gen_synth0_1_parents[] = { "vco1div4_clk", "vco3div2_clk", + "pll3_clk", }; +static const char *gen_synth2_3_parents[] = { "vco1div4_clk", "vco3div2_clk", + "pll2_clk", }; +static const char *rmii_phy_parents[] = { "ras_tx50_clk", "none", + "ras_pll2_clk", "ras_synth0_clk", }; +static const char *smii_rgmii_phy_parents[] = { "none", "ras_tx125_clk", + "ras_pll2_clk", "ras_synth0_clk", }; +static const char *uart_parents[] = { "ras_apb_clk", "gen_synth3_clk", }; +static const char *i2c_parents[] = { "ras_apb_clk", "gen_synth1_clk", }; +static const char *ssp1_parents[] = { "ras_apb_clk", "gen_synth1_clk", + "ras_plclk0_clk", }; +static const char *pci_parents[] = { "ras_pll3_clk", "gen_synth2_clk", }; +static const char *tdm_parents[] = { "ras_pll3_clk", "gen_synth1_clk", }; + +void __init spear1310_clk_init(void) +{ + struct clk *clk, *clk1; + + clk = clk_register_fixed_rate(NULL, "apb_pclk", NULL, CLK_IS_ROOT, 0); + clk_register_clkdev(clk, "apb_pclk", NULL); + + clk = clk_register_fixed_rate(NULL, "osc_32k_clk", NULL, CLK_IS_ROOT, + 32000); + clk_register_clkdev(clk, "osc_32k_clk", NULL); + + clk = clk_register_fixed_rate(NULL, "osc_24m_clk", NULL, CLK_IS_ROOT, + 24000000); + clk_register_clkdev(clk, "osc_24m_clk", NULL); + + clk = clk_register_fixed_rate(NULL, "osc_25m_clk", NULL, CLK_IS_ROOT, + 25000000); + clk_register_clkdev(clk, "osc_25m_clk", NULL); + + clk = clk_register_fixed_rate(NULL, "gmii_125m_pad_clk", NULL, + CLK_IS_ROOT, 125000000); + clk_register_clkdev(clk, "gmii_125m_pad_clk", NULL); + + clk = clk_register_fixed_rate(NULL, "i2s_src_pad_clk", NULL, + CLK_IS_ROOT, 12288000); + clk_register_clkdev(clk, "i2s_src_pad_clk", NULL); + + /* clock derived from 32 KHz osc clk */ + clk = clk_register_gate(NULL, "rtc-spear", "osc_32k_clk", 0, + SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_RTC_CLK_ENB, 0, + &_lock); + clk_register_clkdev(clk, NULL, "fc900000.rtc"); + + /* clock derived from 24 or 25 MHz osc clk */ + /* vco-pll */ + clk = clk_register_mux(NULL, "vco1_mux_clk", vco_parents, + ARRAY_SIZE(vco_parents), 0, SPEAR1310_PLL_CFG, + SPEAR1310_PLL1_CLK_SHIFT, SPEAR1310_PLL_CLK_MASK, 0, + &_lock); + clk_register_clkdev(clk, "vco1_mux_clk", NULL); + clk = clk_register_vco_pll("vco1_clk", "pll1_clk", NULL, "vco1_mux_clk", + 0, SPEAR1310_PLL1_CTR, SPEAR1310_PLL1_FRQ, pll_rtbl, + ARRAY_SIZE(pll_rtbl), &_lock, &clk1, NULL); + clk_register_clkdev(clk, "vco1_clk", NULL); + clk_register_clkdev(clk1, "pll1_clk", NULL); + + clk = clk_register_mux(NULL, "vco2_mux_clk", vco_parents, + ARRAY_SIZE(vco_parents), 0, SPEAR1310_PLL_CFG, + SPEAR1310_PLL2_CLK_SHIFT, SPEAR1310_PLL_CLK_MASK, 0, + &_lock); + clk_register_clkdev(clk, "vco2_mux_clk", NULL); + clk = clk_register_vco_pll("vco2_clk", "pll2_clk", NULL, "vco2_mux_clk", + 0, SPEAR1310_PLL2_CTR, SPEAR1310_PLL2_FRQ, pll_rtbl, + ARRAY_SIZE(pll_rtbl), &_lock, &clk1, NULL); + clk_register_clkdev(clk, "vco2_clk", NULL); + clk_register_clkdev(clk1, "pll2_clk", NULL); + + clk = clk_register_mux(NULL, "vco3_mux_clk", vco_parents, + ARRAY_SIZE(vco_parents), 0, SPEAR1310_PLL_CFG, + SPEAR1310_PLL3_CLK_SHIFT, SPEAR1310_PLL_CLK_MASK, 0, + &_lock); + clk_register_clkdev(clk, "vco3_mux_clk", NULL); + clk = clk_register_vco_pll("vco3_clk", "pll3_clk", NULL, "vco3_mux_clk", + 0, SPEAR1310_PLL3_CTR, SPEAR1310_PLL3_FRQ, pll_rtbl, + ARRAY_SIZE(pll_rtbl), &_lock, &clk1, NULL); + clk_register_clkdev(clk, "vco3_clk", NULL); + clk_register_clkdev(clk1, "pll3_clk", NULL); + + clk = clk_register_vco_pll("vco4_clk", "pll4_clk", NULL, "osc_24m_clk", + 0, SPEAR1310_PLL4_CTR, SPEAR1310_PLL4_FRQ, pll4_rtbl, + ARRAY_SIZE(pll4_rtbl), &_lock, &clk1, NULL); + clk_register_clkdev(clk, "vco4_clk", NULL); + clk_register_clkdev(clk1, "pll4_clk", NULL); + + clk = clk_register_fixed_rate(NULL, "pll5_clk", "osc_24m_clk", 0, + 48000000); + clk_register_clkdev(clk, "pll5_clk", NULL); + + clk = clk_register_fixed_rate(NULL, "pll6_clk", "osc_25m_clk", 0, + 25000000); + clk_register_clkdev(clk, "pll6_clk", NULL); + + /* vco div n clocks */ + clk = clk_register_fixed_factor(NULL, "vco1div2_clk", "vco1_clk", 0, 1, + 2); + clk_register_clkdev(clk, "vco1div2_clk", NULL); + + clk = clk_register_fixed_factor(NULL, "vco1div4_clk", "vco1_clk", 0, 1, + 4); + clk_register_clkdev(clk, "vco1div4_clk", NULL); + + clk = clk_register_fixed_factor(NULL, "vco2div2_clk", "vco2_clk", 0, 1, + 2); + clk_register_clkdev(clk, "vco2div2_clk", NULL); + + clk = clk_register_fixed_factor(NULL, "vco3div2_clk", "vco3_clk", 0, 1, + 2); + clk_register_clkdev(clk, "vco3div2_clk", NULL); + + /* peripherals */ + clk_register_fixed_factor(NULL, "thermal_clk", "osc_24m_clk", 0, 1, + 128); + clk = clk_register_gate(NULL, "thermal_gate_clk", "thermal_clk", 0, + SPEAR1310_PERIP2_CLK_ENB, SPEAR1310_THSENS_CLK_ENB, 0, + &_lock); + clk_register_clkdev(clk, NULL, "spear_thermal"); + + /* clock derived from pll4 clk */ + clk = clk_register_fixed_factor(NULL, "ddr_clk", "pll4_clk", 0, 1, + 1); + clk_register_clkdev(clk, "ddr_clk", NULL); + + /* clock derived from pll1 clk */ + clk = clk_register_fixed_factor(NULL, "cpu_clk", "pll1_clk", 0, 1, 2); + clk_register_clkdev(clk, "cpu_clk", NULL); + + clk = clk_register_fixed_factor(NULL, "wdt_clk", "cpu_clk", 0, 1, + 2); + clk_register_clkdev(clk, NULL, "ec800620.wdt"); + + clk = clk_register_fixed_factor(NULL, "ahb_clk", "pll1_clk", 0, 1, + 6); + clk_register_clkdev(clk, "ahb_clk", NULL); + + clk = clk_register_fixed_factor(NULL, "apb_clk", "pll1_clk", 0, 1, + 12); + clk_register_clkdev(clk, "apb_clk", NULL); + + /* gpt clocks */ + clk = clk_register_mux(NULL, "gpt0_mux_clk", gpt_parents, + ARRAY_SIZE(gpt_parents), 0, SPEAR1310_PERIP_CLK_CFG, + SPEAR1310_GPT0_CLK_SHIFT, SPEAR1310_GPT_CLK_MASK, 0, + &_lock); + clk_register_clkdev(clk, "gpt0_mux_clk", NULL); + clk = clk_register_gate(NULL, "gpt0_clk", "gpt0_mux_clk", 0, + SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_GPT0_CLK_ENB, 0, + &_lock); + clk_register_clkdev(clk, NULL, "gpt0"); + + clk = clk_register_mux(NULL, "gpt1_mux_clk", gpt_parents, + ARRAY_SIZE(gpt_parents), 0, SPEAR1310_PERIP_CLK_CFG, + SPEAR1310_GPT1_CLK_SHIFT, SPEAR1310_GPT_CLK_MASK, 0, + &_lock); + clk_register_clkdev(clk, "gpt1_mux_clk", NULL); + clk = clk_register_gate(NULL, "gpt1_clk", "gpt1_mux_clk", 0, + SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_GPT1_CLK_ENB, 0, + &_lock); + clk_register_clkdev(clk, NULL, "gpt1"); + + clk = clk_register_mux(NULL, "gpt2_mux_clk", gpt_parents, + ARRAY_SIZE(gpt_parents), 0, SPEAR1310_PERIP_CLK_CFG, + SPEAR1310_GPT2_CLK_SHIFT, SPEAR1310_GPT_CLK_MASK, 0, + &_lock); + clk_register_clkdev(clk, "gpt2_mux_clk", NULL); + clk = clk_register_gate(NULL, "gpt2_clk", "gpt2_mux_clk", 0, + SPEAR1310_PERIP2_CLK_ENB, SPEAR1310_GPT2_CLK_ENB, 0, + &_lock); + clk_register_clkdev(clk, NULL, "gpt2"); + + clk = clk_register_mux(NULL, "gpt3_mux_clk", gpt_parents, + ARRAY_SIZE(gpt_parents), 0, SPEAR1310_PERIP_CLK_CFG, + SPEAR1310_GPT3_CLK_SHIFT, SPEAR1310_GPT_CLK_MASK, 0, + &_lock); + clk_register_clkdev(clk, "gpt3_mux_clk", NULL); + clk = clk_register_gate(NULL, "gpt3_clk", "gpt3_mux_clk", 0, + SPEAR1310_PERIP2_CLK_ENB, SPEAR1310_GPT3_CLK_ENB, 0, + &_lock); + clk_register_clkdev(clk, NULL, "gpt3"); + + /* others */ + clk = clk_register_aux("uart_synth_clk", "uart_synth_gate_clk", + "vco1div2_clk", 0, SPEAR1310_UART_CLK_SYNT, NULL, + aux_rtbl, ARRAY_SIZE(aux_rtbl), &_lock, &clk1); + clk_register_clkdev(clk, "uart_synth_clk", NULL); + clk_register_clkdev(clk1, "uart_synth_gate_clk", NULL); + + clk = clk_register_mux(NULL, "uart0_mux_clk", uart0_parents, + ARRAY_SIZE(uart0_parents), 0, SPEAR1310_PERIP_CLK_CFG, + SPEAR1310_UART_CLK_SHIFT, SPEAR1310_UART_CLK_MASK, 0, + &_lock); + clk_register_clkdev(clk, "uart0_mux_clk", NULL); + + clk = clk_register_gate(NULL, "uart0_clk", "uart0_mux_clk", 0, + SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_UART_CLK_ENB, 0, + &_lock); + clk_register_clkdev(clk, NULL, "e0000000.serial"); + + clk = clk_register_aux("sdhci_synth_clk", "sdhci_synth_gate_clk", + "vco1div2_clk", 0, SPEAR1310_SDHCI_CLK_SYNT, NULL, + aux_rtbl, ARRAY_SIZE(aux_rtbl), &_lock, &clk1); + clk_register_clkdev(clk, "sdhci_synth_clk", NULL); + clk_register_clkdev(clk1, "sdhci_synth_gate_clk", NULL); + + clk = clk_register_gate(NULL, "sdhci_clk", "sdhci_synth_gate_clk", 0, + SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_SDHCI_CLK_ENB, 0, + &_lock); + clk_register_clkdev(clk, NULL, "b3000000.sdhci"); + + clk = clk_register_aux("cfxd_synth_clk", "cfxd_synth_gate_clk", + "vco1div2_clk", 0, SPEAR1310_CFXD_CLK_SYNT, NULL, + aux_rtbl, ARRAY_SIZE(aux_rtbl), &_lock, &clk1); + clk_register_clkdev(clk, "cfxd_synth_clk", NULL); + clk_register_clkdev(clk1, "cfxd_synth_gate_clk", NULL); + + clk = clk_register_gate(NULL, "cfxd_clk", "cfxd_synth_gate_clk", 0, + SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_CFXD_CLK_ENB, 0, + &_lock); + clk_register_clkdev(clk, NULL, "b2800000.cf"); + clk_register_clkdev(clk, NULL, "arasan_xd"); + + clk = clk_register_aux("c3_synth_clk", "c3_synth_gate_clk", + "vco1div2_clk", 0, SPEAR1310_C3_CLK_SYNT, NULL, + aux_rtbl, ARRAY_SIZE(aux_rtbl), &_lock, &clk1); + clk_register_clkdev(clk, "c3_synth_clk", NULL); + clk_register_clkdev(clk1, "c3_synth_gate_clk", NULL); + + clk = clk_register_mux(NULL, "c3_mux_clk", c3_parents, + ARRAY_SIZE(c3_parents), 0, SPEAR1310_PERIP_CLK_CFG, + SPEAR1310_C3_CLK_SHIFT, SPEAR1310_C3_CLK_MASK, 0, + &_lock); + clk_register_clkdev(clk, "c3_mux_clk", NULL); + + clk = clk_register_gate(NULL, "c3_clk", "c3_mux_clk", 0, + SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_C3_CLK_ENB, 0, + &_lock); + clk_register_clkdev(clk, NULL, "c3"); + + /* gmac */ + clk = clk_register_mux(NULL, "gmac_phy_input_mux_clk", + gmac_phy_input_parents, + ARRAY_SIZE(gmac_phy_input_parents), 0, + SPEAR1310_GMAC_CLK_CFG, + SPEAR1310_GMAC_PHY_INPUT_CLK_SHIFT, + SPEAR1310_GMAC_PHY_INPUT_CLK_MASK, 0, &_lock); + clk_register_clkdev(clk, "gmac_phy_input_mux_clk", NULL); + + clk = clk_register_aux("gmac_phy_synth_clk", "gmac_phy_synth_gate_clk", + "gmac_phy_input_mux_clk", 0, SPEAR1310_GMAC_CLK_SYNT, + NULL, gmac_rtbl, ARRAY_SIZE(gmac_rtbl), &_lock, &clk1); + clk_register_clkdev(clk, "gmac_phy_synth_clk", NULL); + clk_register_clkdev(clk1, "gmac_phy_synth_gate_clk", NULL); + + clk = clk_register_mux(NULL, "gmac_phy_mux_clk", gmac_phy_parents, + ARRAY_SIZE(gmac_phy_parents), 0, + SPEAR1310_PERIP_CLK_CFG, SPEAR1310_GMAC_PHY_CLK_SHIFT, + SPEAR1310_GMAC_PHY_CLK_MASK, 0, &_lock); + clk_register_clkdev(clk, NULL, "stmmacphy.0"); + + /* clcd */ + clk = clk_register_mux(NULL, "clcd_synth_mux_clk", clcd_synth_parents, + ARRAY_SIZE(clcd_synth_parents), 0, + SPEAR1310_CLCD_CLK_SYNT, SPEAR1310_CLCD_SYNT_CLK_SHIFT, + SPEAR1310_CLCD_SYNT_CLK_MASK, 0, &_lock); + clk_register_clkdev(clk, "clcd_synth_mux_clk", NULL); + + clk = clk_register_frac("clcd_synth_clk", "clcd_synth_mux_clk", 0, + SPEAR1310_CLCD_CLK_SYNT, clcd_rtbl, + ARRAY_SIZE(clcd_rtbl), &_lock); + clk_register_clkdev(clk, "clcd_synth_clk", NULL); + + clk = clk_register_mux(NULL, "clcd_pixel_mux_clk", clcd_pixel_parents, + ARRAY_SIZE(clcd_pixel_parents), 0, + SPEAR1310_PERIP_CLK_CFG, SPEAR1310_CLCD_CLK_SHIFT, + SPEAR1310_CLCD_CLK_MASK, 0, &_lock); + clk_register_clkdev(clk, "clcd_pixel_clk", NULL); + + clk = clk_register_gate(NULL, "clcd_clk", "clcd_pixel_mux_clk", 0, + SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_CLCD_CLK_ENB, 0, + &_lock); + clk_register_clkdev(clk, "clcd_clk", NULL); + + /* i2s */ + clk = clk_register_mux(NULL, "i2s_src_mux_clk", i2s_src_parents, + ARRAY_SIZE(i2s_src_parents), 0, SPEAR1310_I2S_CLK_CFG, + SPEAR1310_I2S_SRC_CLK_SHIFT, SPEAR1310_I2S_SRC_CLK_MASK, + 0, &_lock); + clk_register_clkdev(clk, "i2s_src_clk", NULL); + + clk = clk_register_aux("i2s_prs1_clk", NULL, "i2s_src_mux_clk", 0, + SPEAR1310_I2S_CLK_CFG, &i2s_prs1_masks, i2s_prs1_rtbl, + ARRAY_SIZE(i2s_prs1_rtbl), &_lock, NULL); + clk_register_clkdev(clk, "i2s_prs1_clk", NULL); + + clk = clk_register_mux(NULL, "i2s_ref_mux_clk", i2s_ref_parents, + ARRAY_SIZE(i2s_ref_parents), 0, SPEAR1310_I2S_CLK_CFG, + SPEAR1310_I2S_REF_SHIFT, SPEAR1310_I2S_REF_SEL_MASK, 0, + &_lock); + clk_register_clkdev(clk, "i2s_ref_clk", NULL); + + clk = clk_register_gate(NULL, "i2s_ref_pad_clk", "i2s_ref_mux_clk", 0, + SPEAR1310_PERIP2_CLK_ENB, SPEAR1310_I2S_REF_PAD_CLK_ENB, + 0, &_lock); + clk_register_clkdev(clk, "i2s_ref_pad_clk", NULL); + + clk = clk_register_aux("i2s_sclk_clk", "i2s_sclk_gate_clk", + "i2s_ref_pad_clk", 0, SPEAR1310_I2S_CLK_CFG, + &i2s_sclk_masks, i2s_sclk_rtbl, + ARRAY_SIZE(i2s_sclk_rtbl), &_lock, &clk1); + clk_register_clkdev(clk, "i2s_sclk_clk", NULL); + clk_register_clkdev(clk1, "i2s_sclk_gate_clk", NULL); + + /* clock derived from ahb clk */ + clk = clk_register_gate(NULL, "i2c0_clk", "ahb_clk", 0, + SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_I2C0_CLK_ENB, 0, + &_lock); + clk_register_clkdev(clk, NULL, "e0280000.i2c"); + + clk = clk_register_gate(NULL, "dma_clk", "ahb_clk", 0, + SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_DMA_CLK_ENB, 0, + &_lock); + clk_register_clkdev(clk, NULL, "ea800000.dma"); + clk_register_clkdev(clk, NULL, "eb000000.dma"); + + clk = clk_register_gate(NULL, "jpeg_clk", "ahb_clk", 0, + SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_JPEG_CLK_ENB, 0, + &_lock); + clk_register_clkdev(clk, NULL, "b2000000.jpeg"); + + clk = clk_register_gate(NULL, "gmac_clk", "ahb_clk", 0, + SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_GMAC_CLK_ENB, 0, + &_lock); + clk_register_clkdev(clk, NULL, "e2000000.eth"); + + clk = clk_register_gate(NULL, "fsmc_clk", "ahb_clk", 0, + SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_FSMC_CLK_ENB, 0, + &_lock); + clk_register_clkdev(clk, NULL, "b0000000.flash"); + + clk = clk_register_gate(NULL, "smi_clk", "ahb_clk", 0, + SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_SMI_CLK_ENB, 0, + &_lock); + clk_register_clkdev(clk, NULL, "ea000000.flash"); + + clk = clk_register_gate(NULL, "usbh0_clk", "ahb_clk", 0, + SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_UHC0_CLK_ENB, 0, + &_lock); + clk_register_clkdev(clk, "usbh.0_clk", NULL); + + clk = clk_register_gate(NULL, "usbh1_clk", "ahb_clk", 0, + SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_UHC1_CLK_ENB, 0, + &_lock); + clk_register_clkdev(clk, "usbh.1_clk", NULL); + + clk = clk_register_gate(NULL, "uoc_clk", "ahb_clk", 0, + SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_UOC_CLK_ENB, 0, + &_lock); + clk_register_clkdev(clk, NULL, "uoc"); + + clk = clk_register_gate(NULL, "pcie_sata_0_clk", "ahb_clk", 0, + SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_PCIE_SATA_0_CLK_ENB, + 0, &_lock); + clk_register_clkdev(clk, NULL, "dw_pcie.0"); + clk_register_clkdev(clk, NULL, "ahci.0"); + + clk = clk_register_gate(NULL, "pcie_sata_1_clk", "ahb_clk", 0, + SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_PCIE_SATA_1_CLK_ENB, + 0, &_lock); + clk_register_clkdev(clk, NULL, "dw_pcie.1"); + clk_register_clkdev(clk, NULL, "ahci.1"); + + clk = clk_register_gate(NULL, "pcie_sata_2_clk", "ahb_clk", 0, + SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_PCIE_SATA_2_CLK_ENB, + 0, &_lock); + clk_register_clkdev(clk, NULL, "dw_pcie.2"); + clk_register_clkdev(clk, NULL, "ahci.2"); + + clk = clk_register_gate(NULL, "sysram0_clk", "ahb_clk", 0, + SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_SYSRAM0_CLK_ENB, 0, + &_lock); + clk_register_clkdev(clk, "sysram0_clk", NULL); + + clk = clk_register_gate(NULL, "sysram1_clk", "ahb_clk", 0, + SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_SYSRAM1_CLK_ENB, 0, + &_lock); + clk_register_clkdev(clk, "sysram1_clk", NULL); + + clk = clk_register_aux("adc_synth_clk", "adc_synth_gate_clk", "ahb_clk", + 0, SPEAR1310_ADC_CLK_SYNT, NULL, adc_rtbl, + ARRAY_SIZE(adc_rtbl), &_lock, &clk1); + clk_register_clkdev(clk, "adc_synth_clk", NULL); + clk_register_clkdev(clk1, "adc_synth_gate_clk", NULL); + + clk = clk_register_gate(NULL, "adc_clk", "adc_synth_gate_clk", 0, + SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_ADC_CLK_ENB, 0, + &_lock); + clk_register_clkdev(clk, NULL, "adc_clk"); + + /* clock derived from apb clk */ + clk = clk_register_gate(NULL, "ssp0_clk", "apb_clk", 0, + SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_SSP_CLK_ENB, 0, + &_lock); + clk_register_clkdev(clk, NULL, "e0100000.spi"); + + clk = clk_register_gate(NULL, "gpio0_clk", "apb_clk", 0, + SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_GPIO0_CLK_ENB, 0, + &_lock); + clk_register_clkdev(clk, NULL, "e0600000.gpio"); + + clk = clk_register_gate(NULL, "gpio1_clk", "apb_clk", 0, + SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_GPIO1_CLK_ENB, 0, + &_lock); + clk_register_clkdev(clk, NULL, "e0680000.gpio"); + + clk = clk_register_gate(NULL, "i2s0_clk", "apb_clk", 0, + SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_I2S0_CLK_ENB, 0, + &_lock); + clk_register_clkdev(clk, NULL, "e0180000.i2s"); + + clk = clk_register_gate(NULL, "i2s1_clk", "apb_clk", 0, + SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_I2S1_CLK_ENB, 0, + &_lock); + clk_register_clkdev(clk, NULL, "e0200000.i2s"); + + clk = clk_register_gate(NULL, "kbd_clk", "apb_clk", 0, + SPEAR1310_PERIP2_CLK_ENB, SPEAR1310_KBD_CLK_ENB, 0, + &_lock); + clk_register_clkdev(clk, NULL, "e0300000.kbd"); + + /* RAS clks */ + clk = clk_register_mux(NULL, "gen_synth0_1_mux_clk", + gen_synth0_1_parents, ARRAY_SIZE(gen_synth0_1_parents), + 0, SPEAR1310_PLL_CFG, SPEAR1310_RAS_SYNT0_1_CLK_SHIFT, + SPEAR1310_RAS_SYNT_CLK_MASK, 0, &_lock); + clk_register_clkdev(clk, "gen_synth0_1_clk", NULL); + + clk = clk_register_mux(NULL, "gen_synth2_3_mux_clk", + gen_synth2_3_parents, ARRAY_SIZE(gen_synth2_3_parents), + 0, SPEAR1310_PLL_CFG, SPEAR1310_RAS_SYNT2_3_CLK_SHIFT, + SPEAR1310_RAS_SYNT_CLK_MASK, 0, &_lock); + clk_register_clkdev(clk, "gen_synth2_3_clk", NULL); + + clk = clk_register_frac("gen_synth0_clk", "gen_synth0_1_clk", 0, + SPEAR1310_RAS_CLK_SYNT0, gen_rtbl, ARRAY_SIZE(gen_rtbl), + &_lock); + clk_register_clkdev(clk, "gen_synth0_clk", NULL); + + clk = clk_register_frac("gen_synth1_clk", "gen_synth0_1_clk", 0, + SPEAR1310_RAS_CLK_SYNT1, gen_rtbl, ARRAY_SIZE(gen_rtbl), + &_lock); + clk_register_clkdev(clk, "gen_synth1_clk", NULL); + + clk = clk_register_frac("gen_synth2_clk", "gen_synth2_3_clk", 0, + SPEAR1310_RAS_CLK_SYNT2, gen_rtbl, ARRAY_SIZE(gen_rtbl), + &_lock); + clk_register_clkdev(clk, "gen_synth2_clk", NULL); + + clk = clk_register_frac("gen_synth3_clk", "gen_synth2_3_clk", 0, + SPEAR1310_RAS_CLK_SYNT3, gen_rtbl, ARRAY_SIZE(gen_rtbl), + &_lock); + clk_register_clkdev(clk, "gen_synth3_clk", NULL); + + clk = clk_register_gate(NULL, "ras_osc_24m_clk", "osc_24m_clk", 0, + SPEAR1310_RAS_CLK_ENB, SPEAR1310_OSC_24M_CLK_ENB, 0, + &_lock); + clk_register_clkdev(clk, "ras_osc_24m_clk", NULL); + + clk = clk_register_gate(NULL, "ras_osc_25m_clk", "osc_25m_clk", 0, + SPEAR1310_RAS_CLK_ENB, SPEAR1310_OSC_25M_CLK_ENB, 0, + &_lock); + clk_register_clkdev(clk, "ras_osc_25m_clk", NULL); + + clk = clk_register_gate(NULL, "ras_osc_32k_clk", "osc_32k_clk", 0, + SPEAR1310_RAS_CLK_ENB, SPEAR1310_OSC_32K_CLK_ENB, 0, + &_lock); + clk_register_clkdev(clk, "ras_osc_32k_clk", NULL); + + clk = clk_register_gate(NULL, "ras_pll2_clk", "pll2_clk", 0, + SPEAR1310_RAS_CLK_ENB, SPEAR1310_PLL2_CLK_ENB, 0, + &_lock); + clk_register_clkdev(clk, "ras_pll2_clk", NULL); + + clk = clk_register_gate(NULL, "ras_pll3_clk", "pll3_clk", 0, + SPEAR1310_RAS_CLK_ENB, SPEAR1310_PLL3_CLK_ENB, 0, + &_lock); + clk_register_clkdev(clk, "ras_pll3_clk", NULL); + + clk = clk_register_gate(NULL, "ras_tx125_clk", "gmii_125m_pad_clk", 0, + SPEAR1310_RAS_CLK_ENB, SPEAR1310_C125M_PAD_CLK_ENB, 0, + &_lock); + clk_register_clkdev(clk, "ras_tx125_clk", NULL); + + clk = clk_register_fixed_rate(NULL, "ras_30m_fixed_clk", "pll5_clk", 0, + 30000000); + clk = clk_register_gate(NULL, "ras_30m_clk", "ras_30m_fixed_clk", 0, + SPEAR1310_RAS_CLK_ENB, SPEAR1310_C30M_CLK_ENB, 0, + &_lock); + clk_register_clkdev(clk, "ras_30m_clk", NULL); + + clk = clk_register_fixed_rate(NULL, "ras_48m_fixed_clk", "pll5_clk", 0, + 48000000); + clk = clk_register_gate(NULL, "ras_48m_clk", "ras_48m_fixed_clk", 0, + SPEAR1310_RAS_CLK_ENB, SPEAR1310_C48M_CLK_ENB, 0, + &_lock); + clk_register_clkdev(clk, "ras_48m_clk", NULL); + + clk = clk_register_gate(NULL, "ras_ahb_clk", "ahb_clk", 0, + SPEAR1310_RAS_CLK_ENB, SPEAR1310_ACLK_CLK_ENB, 0, + &_lock); + clk_register_clkdev(clk, "ras_ahb_clk", NULL); + + clk = clk_register_gate(NULL, "ras_apb_clk", "apb_clk", 0, + SPEAR1310_RAS_CLK_ENB, SPEAR1310_PCLK_CLK_ENB, 0, + &_lock); + clk_register_clkdev(clk, "ras_apb_clk", NULL); + + clk = clk_register_fixed_rate(NULL, "ras_plclk0_clk", NULL, CLK_IS_ROOT, + 50000000); + + clk = clk_register_fixed_rate(NULL, "ras_tx50_clk", NULL, CLK_IS_ROOT, + 50000000); + + clk = clk_register_gate(NULL, "can0_clk", "apb_clk", 0, + SPEAR1310_RAS_SW_CLK_CTRL, SPEAR1310_CAN0_CLK_ENB, 0, + &_lock); + clk_register_clkdev(clk, NULL, "c_can_platform.0"); + + clk = clk_register_gate(NULL, "can1_clk", "apb_clk", 0, + SPEAR1310_RAS_SW_CLK_CTRL, SPEAR1310_CAN1_CLK_ENB, 0, + &_lock); + clk_register_clkdev(clk, NULL, "c_can_platform.1"); + + clk = clk_register_gate(NULL, "ras_smii0_clk", "ras_ahb_clk", 0, + SPEAR1310_RAS_SW_CLK_CTRL, SPEAR1310_MII0_CLK_ENB, 0, + &_lock); + clk_register_clkdev(clk, NULL, "5c400000.eth"); + + clk = clk_register_gate(NULL, "ras_smii1_clk", "ras_ahb_clk", 0, + SPEAR1310_RAS_SW_CLK_CTRL, SPEAR1310_MII1_CLK_ENB, 0, + &_lock); + clk_register_clkdev(clk, NULL, "5c500000.eth"); + + clk = clk_register_gate(NULL, "ras_smii2_clk", "ras_ahb_clk", 0, + SPEAR1310_RAS_SW_CLK_CTRL, SPEAR1310_MII2_CLK_ENB, 0, + &_lock); + clk_register_clkdev(clk, NULL, "5c600000.eth"); + + clk = clk_register_gate(NULL, "ras_rgmii_clk", "ras_ahb_clk", 0, + SPEAR1310_RAS_SW_CLK_CTRL, SPEAR1310_GMII_CLK_ENB, 0, + &_lock); + clk_register_clkdev(clk, NULL, "5c700000.eth"); + + clk = clk_register_mux(NULL, "smii_rgmii_phy_mux_clk", + smii_rgmii_phy_parents, + ARRAY_SIZE(smii_rgmii_phy_parents), 0, + SPEAR1310_RAS_CTRL_REG1, + SPEAR1310_SMII_RGMII_PHY_CLK_SHIFT, + SPEAR1310_PHY_CLK_MASK, 0, &_lock); + clk_register_clkdev(clk, NULL, "stmmacphy.1"); + clk_register_clkdev(clk, NULL, "stmmacphy.2"); + clk_register_clkdev(clk, NULL, "stmmacphy.4"); + + clk = clk_register_mux(NULL, "rmii_phy_mux_clk", rmii_phy_parents, + ARRAY_SIZE(rmii_phy_parents), 0, + SPEAR1310_RAS_CTRL_REG1, SPEAR1310_RMII_PHY_CLK_SHIFT, + SPEAR1310_PHY_CLK_MASK, 0, &_lock); + clk_register_clkdev(clk, NULL, "stmmacphy.3"); + + clk = clk_register_mux(NULL, "uart1_mux_clk", uart_parents, + ARRAY_SIZE(uart_parents), 0, SPEAR1310_RAS_CTRL_REG0, + SPEAR1310_UART1_CLK_SHIFT, SPEAR1310_RAS_UART_CLK_MASK, + 0, &_lock); + clk_register_clkdev(clk, "uart1_mux_clk", NULL); + + clk = clk_register_gate(NULL, "uart1_clk", "uart1_mux_clk", 0, + SPEAR1310_RAS_SW_CLK_CTRL, SPEAR1310_UART1_CLK_ENB, 0, + &_lock); + clk_register_clkdev(clk, NULL, "5c800000.serial"); + + clk = clk_register_mux(NULL, "uart2_mux_clk", uart_parents, + ARRAY_SIZE(uart_parents), 0, SPEAR1310_RAS_CTRL_REG0, + SPEAR1310_UART2_CLK_SHIFT, SPEAR1310_RAS_UART_CLK_MASK, + 0, &_lock); + clk_register_clkdev(clk, "uart2_mux_clk", NULL); + + clk = clk_register_gate(NULL, "uart2_clk", "uart2_mux_clk", 0, + SPEAR1310_RAS_SW_CLK_CTRL, SPEAR1310_UART2_CLK_ENB, 0, + &_lock); + clk_register_clkdev(clk, NULL, "5c900000.serial"); + + clk = clk_register_mux(NULL, "uart3_mux_clk", uart_parents, + ARRAY_SIZE(uart_parents), 0, SPEAR1310_RAS_CTRL_REG0, + SPEAR1310_UART3_CLK_SHIFT, SPEAR1310_RAS_UART_CLK_MASK, + 0, &_lock); + clk_register_clkdev(clk, "uart3_mux_clk", NULL); + + clk = clk_register_gate(NULL, "uart3_clk", "uart3_mux_clk", 0, + SPEAR1310_RAS_SW_CLK_CTRL, SPEAR1310_UART3_CLK_ENB, 0, + &_lock); + clk_register_clkdev(clk, NULL, "5ca00000.serial"); + + clk = clk_register_mux(NULL, "uart4_mux_clk", uart_parents, + ARRAY_SIZE(uart_parents), 0, SPEAR1310_RAS_CTRL_REG0, + SPEAR1310_UART4_CLK_SHIFT, SPEAR1310_RAS_UART_CLK_MASK, + 0, &_lock); + clk_register_clkdev(clk, "uart4_mux_clk", NULL); + + clk = clk_register_gate(NULL, "uart4_clk", "uart4_mux_clk", 0, + SPEAR1310_RAS_SW_CLK_CTRL, SPEAR1310_UART4_CLK_ENB, 0, + &_lock); + clk_register_clkdev(clk, NULL, "5cb00000.serial"); + + clk = clk_register_mux(NULL, "uart5_mux_clk", uart_parents, + ARRAY_SIZE(uart_parents), 0, SPEAR1310_RAS_CTRL_REG0, + SPEAR1310_UART5_CLK_SHIFT, SPEAR1310_RAS_UART_CLK_MASK, + 0, &_lock); + clk_register_clkdev(clk, "uart5_mux_clk", NULL); + + clk = clk_register_gate(NULL, "uart5_clk", "uart5_mux_clk", 0, + SPEAR1310_RAS_SW_CLK_CTRL, SPEAR1310_UART5_CLK_ENB, 0, + &_lock); + clk_register_clkdev(clk, NULL, "5cc00000.serial"); + + clk = clk_register_mux(NULL, "i2c1_mux_clk", i2c_parents, + ARRAY_SIZE(i2c_parents), 0, SPEAR1310_RAS_CTRL_REG0, + SPEAR1310_I2C1_CLK_SHIFT, SPEAR1310_I2C_CLK_MASK, 0, + &_lock); + clk_register_clkdev(clk, "i2c1_mux_clk", NULL); + + clk = clk_register_gate(NULL, "i2c1_clk", "i2c1_mux_clk", 0, + SPEAR1310_RAS_SW_CLK_CTRL, SPEAR1310_I2C1_CLK_ENB, 0, + &_lock); + clk_register_clkdev(clk, NULL, "5cd00000.i2c"); + + clk = clk_register_mux(NULL, "i2c2_mux_clk", i2c_parents, + ARRAY_SIZE(i2c_parents), 0, SPEAR1310_RAS_CTRL_REG0, + SPEAR1310_I2C2_CLK_SHIFT, SPEAR1310_I2C_CLK_MASK, 0, + &_lock); + clk_register_clkdev(clk, "i2c2_mux_clk", NULL); + + clk = clk_register_gate(NULL, "i2c2_clk", "i2c2_mux_clk", 0, + SPEAR1310_RAS_SW_CLK_CTRL, SPEAR1310_I2C2_CLK_ENB, 0, + &_lock); + clk_register_clkdev(clk, NULL, "5ce00000.i2c"); + + clk = clk_register_mux(NULL, "i2c3_mux_clk", i2c_parents, + ARRAY_SIZE(i2c_parents), 0, SPEAR1310_RAS_CTRL_REG0, + SPEAR1310_I2C3_CLK_SHIFT, SPEAR1310_I2C_CLK_MASK, 0, + &_lock); + clk_register_clkdev(clk, "i2c3_mux_clk", NULL); + + clk = clk_register_gate(NULL, "i2c3_clk", "i2c3_mux_clk", 0, + SPEAR1310_RAS_SW_CLK_CTRL, SPEAR1310_I2C3_CLK_ENB, 0, + &_lock); + clk_register_clkdev(clk, NULL, "5cf00000.i2c"); + + clk = clk_register_mux(NULL, "i2c4_mux_clk", i2c_parents, + ARRAY_SIZE(i2c_parents), 0, SPEAR1310_RAS_CTRL_REG0, + SPEAR1310_I2C4_CLK_SHIFT, SPEAR1310_I2C_CLK_MASK, 0, + &_lock); + clk_register_clkdev(clk, "i2c4_mux_clk", NULL); + + clk = clk_register_gate(NULL, "i2c4_clk", "i2c4_mux_clk", 0, + SPEAR1310_RAS_SW_CLK_CTRL, SPEAR1310_I2C4_CLK_ENB, 0, + &_lock); + clk_register_clkdev(clk, NULL, "5d000000.i2c"); + + clk = clk_register_mux(NULL, "i2c5_mux_clk", i2c_parents, + ARRAY_SIZE(i2c_parents), 0, SPEAR1310_RAS_CTRL_REG0, + SPEAR1310_I2C5_CLK_SHIFT, SPEAR1310_I2C_CLK_MASK, 0, + &_lock); + clk_register_clkdev(clk, "i2c5_mux_clk", NULL); + + clk = clk_register_gate(NULL, "i2c5_clk", "i2c5_mux_clk", 0, + SPEAR1310_RAS_SW_CLK_CTRL, SPEAR1310_I2C5_CLK_ENB, 0, + &_lock); + clk_register_clkdev(clk, NULL, "5d100000.i2c"); + + clk = clk_register_mux(NULL, "i2c6_mux_clk", i2c_parents, + ARRAY_SIZE(i2c_parents), 0, SPEAR1310_RAS_CTRL_REG0, + SPEAR1310_I2C6_CLK_SHIFT, SPEAR1310_I2C_CLK_MASK, 0, + &_lock); + clk_register_clkdev(clk, "i2c6_mux_clk", NULL); + + clk = clk_register_gate(NULL, "i2c6_clk", "i2c6_mux_clk", 0, + SPEAR1310_RAS_SW_CLK_CTRL, SPEAR1310_I2C6_CLK_ENB, 0, + &_lock); + clk_register_clkdev(clk, NULL, "5d200000.i2c"); + + clk = clk_register_mux(NULL, "i2c7_mux_clk", i2c_parents, + ARRAY_SIZE(i2c_parents), 0, SPEAR1310_RAS_CTRL_REG0, + SPEAR1310_I2C7_CLK_SHIFT, SPEAR1310_I2C_CLK_MASK, 0, + &_lock); + clk_register_clkdev(clk, "i2c7_mux_clk", NULL); + + clk = clk_register_gate(NULL, "i2c7_clk", "i2c7_mux_clk", 0, + SPEAR1310_RAS_SW_CLK_CTRL, SPEAR1310_I2C7_CLK_ENB, 0, + &_lock); + clk_register_clkdev(clk, NULL, "5d300000.i2c"); + + clk = clk_register_mux(NULL, "ssp1_mux_clk", ssp1_parents, + ARRAY_SIZE(ssp1_parents), 0, SPEAR1310_RAS_CTRL_REG0, + SPEAR1310_SSP1_CLK_SHIFT, SPEAR1310_SSP1_CLK_MASK, 0, + &_lock); + clk_register_clkdev(clk, "ssp1_mux_clk", NULL); + + clk = clk_register_gate(NULL, "ssp1_clk", "ssp1_mux_clk", 0, + SPEAR1310_RAS_SW_CLK_CTRL, SPEAR1310_SSP1_CLK_ENB, 0, + &_lock); + clk_register_clkdev(clk, NULL, "5d400000.spi"); + + clk = clk_register_mux(NULL, "pci_mux_clk", pci_parents, + ARRAY_SIZE(pci_parents), 0, SPEAR1310_RAS_CTRL_REG0, + SPEAR1310_PCI_CLK_SHIFT, SPEAR1310_PCI_CLK_MASK, 0, + &_lock); + clk_register_clkdev(clk, "pci_mux_clk", NULL); + + clk = clk_register_gate(NULL, "pci_clk", "pci_mux_clk", 0, + SPEAR1310_RAS_SW_CLK_CTRL, SPEAR1310_PCI_CLK_ENB, 0, + &_lock); + clk_register_clkdev(clk, NULL, "pci"); + + clk = clk_register_mux(NULL, "tdm1_mux_clk", tdm_parents, + ARRAY_SIZE(tdm_parents), 0, SPEAR1310_RAS_CTRL_REG0, + SPEAR1310_TDM1_CLK_SHIFT, SPEAR1310_TDM_CLK_MASK, 0, + &_lock); + clk_register_clkdev(clk, "tdm1_mux_clk", NULL); + + clk = clk_register_gate(NULL, "tdm1_clk", "tdm1_mux_clk", 0, + SPEAR1310_RAS_SW_CLK_CTRL, SPEAR1310_TDM1_CLK_ENB, 0, + &_lock); + clk_register_clkdev(clk, NULL, "tdm_hdlc.0"); + + clk = clk_register_mux(NULL, "tdm2_mux_clk", tdm_parents, + ARRAY_SIZE(tdm_parents), 0, SPEAR1310_RAS_CTRL_REG0, + SPEAR1310_TDM2_CLK_SHIFT, SPEAR1310_TDM_CLK_MASK, 0, + &_lock); + clk_register_clkdev(clk, "tdm2_mux_clk", NULL); + + clk = clk_register_gate(NULL, "tdm2_clk", "tdm2_mux_clk", 0, + SPEAR1310_RAS_SW_CLK_CTRL, SPEAR1310_TDM2_CLK_ENB, 0, + &_lock); + clk_register_clkdev(clk, NULL, "tdm_hdlc.1"); +} diff --git a/drivers/clk/spear/spear1340_clock.c b/drivers/clk/spear/spear1340_clock.c new file mode 100644 index 000000000000..f130919d5bf8 --- /dev/null +++ b/drivers/clk/spear/spear1340_clock.c @@ -0,0 +1,964 @@ +/* + * arch/arm/mach-spear13xx/spear1340_clock.c + * + * SPEAr1340 machine clock framework source file + * + * Copyright (C) 2012 ST Microelectronics + * Viresh Kumar + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include +#include +#include +#include +#include +#include +#include +#include "clk.h" + +/* Clock Configuration Registers */ +#define SPEAR1340_SYS_CLK_CTRL (VA_MISC_BASE + 0x200) + #define SPEAR1340_HCLK_SRC_SEL_SHIFT 27 + #define SPEAR1340_HCLK_SRC_SEL_MASK 1 + #define SPEAR1340_SCLK_SRC_SEL_SHIFT 23 + #define SPEAR1340_SCLK_SRC_SEL_MASK 3 + +/* PLL related registers and bit values */ +#define SPEAR1340_PLL_CFG (VA_MISC_BASE + 0x210) + /* PLL_CFG bit values */ + #define SPEAR1340_CLCD_SYNT_CLK_MASK 1 + #define SPEAR1340_CLCD_SYNT_CLK_SHIFT 31 + #define SPEAR1340_GEN_SYNT2_3_CLK_SHIFT 29 + #define SPEAR1340_GEN_SYNT_CLK_MASK 2 + #define SPEAR1340_GEN_SYNT0_1_CLK_SHIFT 27 + #define SPEAR1340_PLL_CLK_MASK 2 + #define SPEAR1340_PLL3_CLK_SHIFT 24 + #define SPEAR1340_PLL2_CLK_SHIFT 22 + #define SPEAR1340_PLL1_CLK_SHIFT 20 + +#define SPEAR1340_PLL1_CTR (VA_MISC_BASE + 0x214) +#define SPEAR1340_PLL1_FRQ (VA_MISC_BASE + 0x218) +#define SPEAR1340_PLL2_CTR (VA_MISC_BASE + 0x220) +#define SPEAR1340_PLL2_FRQ (VA_MISC_BASE + 0x224) +#define SPEAR1340_PLL3_CTR (VA_MISC_BASE + 0x22C) +#define SPEAR1340_PLL3_FRQ (VA_MISC_BASE + 0x230) +#define SPEAR1340_PLL4_CTR (VA_MISC_BASE + 0x238) +#define SPEAR1340_PLL4_FRQ (VA_MISC_BASE + 0x23C) +#define SPEAR1340_PERIP_CLK_CFG (VA_MISC_BASE + 0x244) + /* PERIP_CLK_CFG bit values */ + #define SPEAR1340_SPDIF_CLK_MASK 1 + #define SPEAR1340_SPDIF_OUT_CLK_SHIFT 15 + #define SPEAR1340_SPDIF_IN_CLK_SHIFT 14 + #define SPEAR1340_GPT3_CLK_SHIFT 13 + #define SPEAR1340_GPT2_CLK_SHIFT 12 + #define SPEAR1340_GPT_CLK_MASK 1 + #define SPEAR1340_GPT1_CLK_SHIFT 9 + #define SPEAR1340_GPT0_CLK_SHIFT 8 + #define SPEAR1340_UART_CLK_MASK 2 + #define SPEAR1340_UART1_CLK_SHIFT 6 + #define SPEAR1340_UART0_CLK_SHIFT 4 + #define SPEAR1340_CLCD_CLK_MASK 2 + #define SPEAR1340_CLCD_CLK_SHIFT 2 + #define SPEAR1340_C3_CLK_MASK 1 + #define SPEAR1340_C3_CLK_SHIFT 1 + +#define SPEAR1340_GMAC_CLK_CFG (VA_MISC_BASE + 0x248) + #define SPEAR1340_GMAC_PHY_CLK_MASK 1 + #define SPEAR1340_GMAC_PHY_CLK_SHIFT 2 + #define SPEAR1340_GMAC_PHY_INPUT_CLK_MASK 2 + #define SPEAR1340_GMAC_PHY_INPUT_CLK_SHIFT 0 + +#define SPEAR1340_I2S_CLK_CFG (VA_MISC_BASE + 0x24C) + /* I2S_CLK_CFG register mask */ + #define SPEAR1340_I2S_SCLK_X_MASK 0x1F + #define SPEAR1340_I2S_SCLK_X_SHIFT 27 + #define SPEAR1340_I2S_SCLK_Y_MASK 0x1F + #define SPEAR1340_I2S_SCLK_Y_SHIFT 22 + #define SPEAR1340_I2S_SCLK_EQ_SEL_SHIFT 21 + #define SPEAR1340_I2S_SCLK_SYNTH_ENB 20 + #define SPEAR1340_I2S_PRS1_CLK_X_MASK 0xFF + #define SPEAR1340_I2S_PRS1_CLK_X_SHIFT 12 + #define SPEAR1340_I2S_PRS1_CLK_Y_MASK 0xFF + #define SPEAR1340_I2S_PRS1_CLK_Y_SHIFT 4 + #define SPEAR1340_I2S_PRS1_EQ_SEL_SHIFT 3 + #define SPEAR1340_I2S_REF_SEL_MASK 1 + #define SPEAR1340_I2S_REF_SHIFT 2 + #define SPEAR1340_I2S_SRC_CLK_MASK 2 + #define SPEAR1340_I2S_SRC_CLK_SHIFT 0 + +#define SPEAR1340_C3_CLK_SYNT (VA_MISC_BASE + 0x250) +#define SPEAR1340_UART0_CLK_SYNT (VA_MISC_BASE + 0x254) +#define SPEAR1340_UART1_CLK_SYNT (VA_MISC_BASE + 0x258) +#define SPEAR1340_GMAC_CLK_SYNT (VA_MISC_BASE + 0x25C) +#define SPEAR1340_SDHCI_CLK_SYNT (VA_MISC_BASE + 0x260) +#define SPEAR1340_CFXD_CLK_SYNT (VA_MISC_BASE + 0x264) +#define SPEAR1340_ADC_CLK_SYNT (VA_MISC_BASE + 0x270) +#define SPEAR1340_AMBA_CLK_SYNT (VA_MISC_BASE + 0x274) +#define SPEAR1340_CLCD_CLK_SYNT (VA_MISC_BASE + 0x27C) +#define SPEAR1340_SYS_CLK_SYNT (VA_MISC_BASE + 0x284) +#define SPEAR1340_GEN_CLK_SYNT0 (VA_MISC_BASE + 0x28C) +#define SPEAR1340_GEN_CLK_SYNT1 (VA_MISC_BASE + 0x294) +#define SPEAR1340_GEN_CLK_SYNT2 (VA_MISC_BASE + 0x29C) +#define SPEAR1340_GEN_CLK_SYNT3 (VA_MISC_BASE + 0x304) +#define SPEAR1340_PERIP1_CLK_ENB (VA_MISC_BASE + 0x30C) + #define SPEAR1340_RTC_CLK_ENB 31 + #define SPEAR1340_ADC_CLK_ENB 30 + #define SPEAR1340_C3_CLK_ENB 29 + #define SPEAR1340_CLCD_CLK_ENB 27 + #define SPEAR1340_DMA_CLK_ENB 25 + #define SPEAR1340_GPIO1_CLK_ENB 24 + #define SPEAR1340_GPIO0_CLK_ENB 23 + #define SPEAR1340_GPT1_CLK_ENB 22 + #define SPEAR1340_GPT0_CLK_ENB 21 + #define SPEAR1340_I2S_PLAY_CLK_ENB 20 + #define SPEAR1340_I2S_REC_CLK_ENB 19 + #define SPEAR1340_I2C0_CLK_ENB 18 + #define SPEAR1340_SSP_CLK_ENB 17 + #define SPEAR1340_UART0_CLK_ENB 15 + #define SPEAR1340_PCIE_SATA_CLK_ENB 12 + #define SPEAR1340_UOC_CLK_ENB 11 + #define SPEAR1340_UHC1_CLK_ENB 10 + #define SPEAR1340_UHC0_CLK_ENB 9 + #define SPEAR1340_GMAC_CLK_ENB 8 + #define SPEAR1340_CFXD_CLK_ENB 7 + #define SPEAR1340_SDHCI_CLK_ENB 6 + #define SPEAR1340_SMI_CLK_ENB 5 + #define SPEAR1340_FSMC_CLK_ENB 4 + #define SPEAR1340_SYSRAM0_CLK_ENB 3 + #define SPEAR1340_SYSRAM1_CLK_ENB 2 + #define SPEAR1340_SYSROM_CLK_ENB 1 + #define SPEAR1340_BUS_CLK_ENB 0 + +#define SPEAR1340_PERIP2_CLK_ENB (VA_MISC_BASE + 0x310) + #define SPEAR1340_THSENS_CLK_ENB 8 + #define SPEAR1340_I2S_REF_PAD_CLK_ENB 7 + #define SPEAR1340_ACP_CLK_ENB 6 + #define SPEAR1340_GPT3_CLK_ENB 5 + #define SPEAR1340_GPT2_CLK_ENB 4 + #define SPEAR1340_KBD_CLK_ENB 3 + #define SPEAR1340_CPU_DBG_CLK_ENB 2 + #define SPEAR1340_DDR_CORE_CLK_ENB 1 + #define SPEAR1340_DDR_CTRL_CLK_ENB 0 + +#define SPEAR1340_PERIP3_CLK_ENB (VA_MISC_BASE + 0x314) + #define SPEAR1340_PLGPIO_CLK_ENB 18 + #define SPEAR1340_VIDEO_DEC_CLK_ENB 16 + #define SPEAR1340_VIDEO_ENC_CLK_ENB 15 + #define SPEAR1340_SPDIF_OUT_CLK_ENB 13 + #define SPEAR1340_SPDIF_IN_CLK_ENB 12 + #define SPEAR1340_VIDEO_IN_CLK_ENB 11 + #define SPEAR1340_CAM0_CLK_ENB 10 + #define SPEAR1340_CAM1_CLK_ENB 9 + #define SPEAR1340_CAM2_CLK_ENB 8 + #define SPEAR1340_CAM3_CLK_ENB 7 + #define SPEAR1340_MALI_CLK_ENB 6 + #define SPEAR1340_CEC0_CLK_ENB 5 + #define SPEAR1340_CEC1_CLK_ENB 4 + #define SPEAR1340_PWM_CLK_ENB 3 + #define SPEAR1340_I2C1_CLK_ENB 2 + #define SPEAR1340_UART1_CLK_ENB 1 + +static DEFINE_SPINLOCK(_lock); + +/* pll rate configuration table, in ascending order of rates */ +static struct pll_rate_tbl pll_rtbl[] = { + /* PCLK 24MHz */ + {.mode = 0, .m = 0x83, .n = 0x04, .p = 0x5}, /* vco 1572, pll 49.125 MHz */ + {.mode = 0, .m = 0x7D, .n = 0x06, .p = 0x3}, /* vco 1000, pll 125 MHz */ + {.mode = 0, .m = 0x64, .n = 0x06, .p = 0x1}, /* vco 800, pll 400 MHz */ + {.mode = 0, .m = 0x7D, .n = 0x06, .p = 0x1}, /* vco 1000, pll 500 MHz */ + {.mode = 0, .m = 0xA6, .n = 0x06, .p = 0x1}, /* vco 1328, pll 664 MHz */ + {.mode = 0, .m = 0xC8, .n = 0x06, .p = 0x1}, /* vco 1600, pll 800 MHz */ + {.mode = 0, .m = 0x7D, .n = 0x06, .p = 0x0}, /* vco 1, pll 1 GHz */ + {.mode = 0, .m = 0x96, .n = 0x06, .p = 0x0}, /* vco 1200, pll 1200 MHz */ +}; + +/* vco-pll4 rate configuration table, in ascending order of rates */ +static struct pll_rate_tbl pll4_rtbl[] = { + {.mode = 0, .m = 0x7D, .n = 0x06, .p = 0x2}, /* vco 1000, pll 250 MHz */ + {.mode = 0, .m = 0xA6, .n = 0x06, .p = 0x2}, /* vco 1328, pll 332 MHz */ + {.mode = 0, .m = 0xC8, .n = 0x06, .p = 0x2}, /* vco 1600, pll 400 MHz */ + {.mode = 0, .m = 0x7D, .n = 0x06, .p = 0x0}, /* vco 1, pll 1 GHz */ +}; + +/* + * All below entries generate 166 MHz for + * different values of vco1div2 + */ +static struct frac_rate_tbl amba_synth_rtbl[] = { + {.div = 0x06062}, /* for vco1div2 = 500 MHz */ + {.div = 0x04D1B}, /* for vco1div2 = 400 MHz */ + {.div = 0x04000}, /* for vco1div2 = 332 MHz */ + {.div = 0x03031}, /* for vco1div2 = 250 MHz */ + {.div = 0x0268D}, /* for vco1div2 = 200 MHz */ +}; + +/* + * Synthesizer Clock derived from vcodiv2. This clock is one of the + * possible clocks to feed cpu directly. + * We can program this synthesizer to make cpu run on different clock + * frequencies. + * Following table provides configuration values to let cpu run on 200, + * 250, 332, 400 or 500 MHz considering different possibilites of input + * (vco1div2) clock. + * + * -------------------------------------------------------------------- + * vco1div2(Mhz) fout(Mhz) cpuclk = fout/2 div + * -------------------------------------------------------------------- + * 400 200 100 0x04000 + * 400 250 125 0x03333 + * 400 332 166 0x0268D + * 400 400 200 0x02000 + * -------------------------------------------------------------------- + * 500 200 100 0x05000 + * 500 250 125 0x04000 + * 500 332 166 0x03031 + * 500 400 200 0x02800 + * 500 500 250 0x02000 + * -------------------------------------------------------------------- + * 664 200 100 0x06a38 + * 664 250 125 0x054FD + * 664 332 166 0x04000 + * 664 400 200 0x0351E + * 664 500 250 0x02A7E + * -------------------------------------------------------------------- + * 800 200 100 0x08000 + * 800 250 125 0x06666 + * 800 332 166 0x04D18 + * 800 400 200 0x04000 + * 800 500 250 0x03333 + * -------------------------------------------------------------------- + * sys rate configuration table is in descending order of divisor. + */ +static struct frac_rate_tbl sys_synth_rtbl[] = { + {.div = 0x08000}, + {.div = 0x06a38}, + {.div = 0x06666}, + {.div = 0x054FD}, + {.div = 0x05000}, + {.div = 0x04D18}, + {.div = 0x04000}, + {.div = 0x0351E}, + {.div = 0x03333}, + {.div = 0x03031}, + {.div = 0x02A7E}, + {.div = 0x02800}, + {.div = 0x0268D}, + {.div = 0x02000}, +}; + +/* aux rate configuration table, in ascending order of rates */ +static struct aux_rate_tbl aux_rtbl[] = { + /* For VCO1div2 = 500 MHz */ + {.xscale = 10, .yscale = 204, .eq = 0}, /* 12.29 MHz */ + {.xscale = 4, .yscale = 21, .eq = 0}, /* 48 MHz */ + {.xscale = 2, .yscale = 6, .eq = 0}, /* 83 MHz */ + {.xscale = 2, .yscale = 4, .eq = 0}, /* 125 MHz */ + {.xscale = 1, .yscale = 3, .eq = 1}, /* 166 MHz */ + {.xscale = 1, .yscale = 2, .eq = 1}, /* 250 MHz */ +}; + +/* gmac rate configuration table, in ascending order of rates */ +static struct aux_rate_tbl gmac_rtbl[] = { + /* For gmac phy input clk */ + {.xscale = 2, .yscale = 6, .eq = 0}, /* divided by 6 */ + {.xscale = 2, .yscale = 4, .eq = 0}, /* divided by 4 */ + {.xscale = 1, .yscale = 3, .eq = 1}, /* divided by 3 */ + {.xscale = 1, .yscale = 2, .eq = 1}, /* divided by 2 */ +}; + +/* clcd rate configuration table, in ascending order of rates */ +static struct frac_rate_tbl clcd_rtbl[] = { + {.div = 0x14000}, /* 25 Mhz , for vc01div4 = 250 MHz*/ + {.div = 0x1284B}, /* 27 Mhz , for vc01div4 = 250 MHz*/ + {.div = 0x0D8D3}, /* 58 Mhz , for vco1div4 = 393 MHz */ + {.div = 0x0B72C}, /* 58 Mhz , for vco1div4 = 332 MHz */ + {.div = 0x089EE}, /* 58 Mhz , for vc01div4 = 250 MHz*/ + {.div = 0x07BA0}, /* 65 Mhz , for vc01div4 = 250 MHz*/ + {.div = 0x06f1C}, /* 72 Mhz , for vc01div4 = 250 MHz*/ + {.div = 0x06E58}, /* 58 Mhz , for vco1div4 = 200 MHz */ + {.div = 0x06c1B}, /* 74 Mhz , for vc01div4 = 250 MHz*/ + {.div = 0x04A12}, /* 108 Mhz , for vc01div4 = 250 MHz*/ + {.div = 0x0378E}, /* 144 Mhz , for vc01div4 = 250 MHz*/ + {.div = 0x0360D}, /* 148 Mhz , for vc01div4 = 250 MHz*/ + {.div = 0x035E0}, /* 148.5 MHz, for vc01div4 = 250 MHz*/ +}; + +/* i2s prescaler1 masks */ +static struct aux_clk_masks i2s_prs1_masks = { + .eq_sel_mask = AUX_EQ_SEL_MASK, + .eq_sel_shift = SPEAR1340_I2S_PRS1_EQ_SEL_SHIFT, + .eq1_mask = AUX_EQ1_SEL, + .eq2_mask = AUX_EQ2_SEL, + .xscale_sel_mask = SPEAR1340_I2S_PRS1_CLK_X_MASK, + .xscale_sel_shift = SPEAR1340_I2S_PRS1_CLK_X_SHIFT, + .yscale_sel_mask = SPEAR1340_I2S_PRS1_CLK_Y_MASK, + .yscale_sel_shift = SPEAR1340_I2S_PRS1_CLK_Y_SHIFT, +}; + +/* i2s sclk (bit clock) syynthesizers masks */ +static struct aux_clk_masks i2s_sclk_masks = { + .eq_sel_mask = AUX_EQ_SEL_MASK, + .eq_sel_shift = SPEAR1340_I2S_SCLK_EQ_SEL_SHIFT, + .eq1_mask = AUX_EQ1_SEL, + .eq2_mask = AUX_EQ2_SEL, + .xscale_sel_mask = SPEAR1340_I2S_SCLK_X_MASK, + .xscale_sel_shift = SPEAR1340_I2S_SCLK_X_SHIFT, + .yscale_sel_mask = SPEAR1340_I2S_SCLK_Y_MASK, + .yscale_sel_shift = SPEAR1340_I2S_SCLK_Y_SHIFT, + .enable_bit = SPEAR1340_I2S_SCLK_SYNTH_ENB, +}; + +/* i2s prs1 aux rate configuration table, in ascending order of rates */ +static struct aux_rate_tbl i2s_prs1_rtbl[] = { + /* For parent clk = 49.152 MHz */ + {.xscale = 1, .yscale = 12, .eq = 0}, /* 2.048 MHz, smp freq = 8Khz */ + {.xscale = 11, .yscale = 96, .eq = 0}, /* 2.816 MHz, smp freq = 11Khz */ + {.xscale = 1, .yscale = 6, .eq = 0}, /* 4.096 MHz, smp freq = 16Khz */ + {.xscale = 11, .yscale = 48, .eq = 0}, /* 5.632 MHz, smp freq = 22Khz */ + + /* + * with parent clk = 49.152, freq gen is 8.192 MHz, smp freq = 32Khz + * with parent clk = 12.288, freq gen is 2.048 MHz, smp freq = 8Khz + */ + {.xscale = 1, .yscale = 3, .eq = 0}, + + /* For parent clk = 49.152 MHz */ + {.xscale = 17, .yscale = 37, .eq = 0}, /* 11.289 MHz, smp freq = 44Khz*/ + {.xscale = 1, .yscale = 2, .eq = 0}, /* 12.288 MHz, smp freq = 48Khz*/ +}; + +/* i2s sclk aux rate configuration table, in ascending order of rates */ +static struct aux_rate_tbl i2s_sclk_rtbl[] = { + /* For sclk = ref_clk * x/2/y */ + {.xscale = 1, .yscale = 4, .eq = 0}, + {.xscale = 1, .yscale = 2, .eq = 0}, +}; + +/* adc rate configuration table, in ascending order of rates */ +/* possible adc range is 2.5 MHz to 20 MHz. */ +static struct aux_rate_tbl adc_rtbl[] = { + /* For ahb = 166.67 MHz */ + {.xscale = 1, .yscale = 31, .eq = 0}, /* 2.68 MHz */ + {.xscale = 2, .yscale = 21, .eq = 0}, /* 7.94 MHz */ + {.xscale = 4, .yscale = 21, .eq = 0}, /* 15.87 MHz */ + {.xscale = 10, .yscale = 42, .eq = 0}, /* 19.84 MHz */ +}; + +/* General synth rate configuration table, in ascending order of rates */ +static struct frac_rate_tbl gen_rtbl[] = { + /* For vco1div4 = 250 MHz */ + {.div = 0x1624E}, /* 22.5792 MHz */ + {.div = 0x14585}, /* 24.576 MHz */ + {.div = 0x14000}, /* 25 MHz */ + {.div = 0x0B127}, /* 45.1584 MHz */ + {.div = 0x0A000}, /* 50 MHz */ + {.div = 0x061A8}, /* 81.92 MHz */ + {.div = 0x05000}, /* 100 MHz */ + {.div = 0x02800}, /* 200 MHz */ + {.div = 0x02620}, /* 210 MHz */ + {.div = 0x02460}, /* 220 MHz */ + {.div = 0x022C0}, /* 230 MHz */ + {.div = 0x02160}, /* 240 MHz */ + {.div = 0x02000}, /* 250 MHz */ +}; + +/* clock parents */ +static const char *vco_parents[] = { "osc_24m_clk", "osc_25m_clk", }; +static const char *sys_parents[] = { "none", "pll1_clk", "none", "none", + "sys_synth_clk", "none", "pll2_clk", "pll3_clk", }; +static const char *ahb_parents[] = { "cpu_div3_clk", "amba_synth_clk", }; +static const char *gpt_parents[] = { "osc_24m_clk", "apb_clk", }; +static const char *uart0_parents[] = { "pll5_clk", "osc_24m_clk", + "uart0_synth_gate_clk", }; +static const char *uart1_parents[] = { "pll5_clk", "osc_24m_clk", + "uart1_synth_gate_clk", }; +static const char *c3_parents[] = { "pll5_clk", "c3_synth_gate_clk", }; +static const char *gmac_phy_input_parents[] = { "gmii_125m_pad_clk", "pll2_clk", + "osc_25m_clk", }; +static const char *gmac_phy_parents[] = { "gmac_phy_input_mux_clk", + "gmac_phy_synth_gate_clk", }; +static const char *clcd_synth_parents[] = { "vco1div4_clk", "pll2_clk", }; +static const char *clcd_pixel_parents[] = { "pll5_clk", "clcd_synth_clk", }; +static const char *i2s_src_parents[] = { "vco1div2_clk", "pll2_clk", "pll3_clk", + "i2s_src_pad_clk", }; +static const char *i2s_ref_parents[] = { "i2s_src_mux_clk", "i2s_prs1_clk", }; +static const char *spdif_out_parents[] = { "i2s_src_pad_clk", "gen_synth2_clk", +}; +static const char *spdif_in_parents[] = { "pll2_clk", "gen_synth3_clk", }; + +static const char *gen_synth0_1_parents[] = { "vco1div4_clk", "vco3div2_clk", + "pll3_clk", }; +static const char *gen_synth2_3_parents[] = { "vco1div4_clk", "vco3div2_clk", + "pll2_clk", }; + +void __init spear1340_clk_init(void) +{ + struct clk *clk, *clk1; + + clk = clk_register_fixed_rate(NULL, "apb_pclk", NULL, CLK_IS_ROOT, 0); + clk_register_clkdev(clk, "apb_pclk", NULL); + + clk = clk_register_fixed_rate(NULL, "osc_32k_clk", NULL, CLK_IS_ROOT, + 32000); + clk_register_clkdev(clk, "osc_32k_clk", NULL); + + clk = clk_register_fixed_rate(NULL, "osc_24m_clk", NULL, CLK_IS_ROOT, + 24000000); + clk_register_clkdev(clk, "osc_24m_clk", NULL); + + clk = clk_register_fixed_rate(NULL, "osc_25m_clk", NULL, CLK_IS_ROOT, + 25000000); + clk_register_clkdev(clk, "osc_25m_clk", NULL); + + clk = clk_register_fixed_rate(NULL, "gmii_125m_pad_clk", NULL, + CLK_IS_ROOT, 125000000); + clk_register_clkdev(clk, "gmii_125m_pad_clk", NULL); + + clk = clk_register_fixed_rate(NULL, "i2s_src_pad_clk", NULL, + CLK_IS_ROOT, 12288000); + clk_register_clkdev(clk, "i2s_src_pad_clk", NULL); + + /* clock derived from 32 KHz osc clk */ + clk = clk_register_gate(NULL, "rtc-spear", "osc_32k_clk", 0, + SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_RTC_CLK_ENB, 0, + &_lock); + clk_register_clkdev(clk, NULL, "fc900000.rtc"); + + /* clock derived from 24 or 25 MHz osc clk */ + /* vco-pll */ + clk = clk_register_mux(NULL, "vco1_mux_clk", vco_parents, + ARRAY_SIZE(vco_parents), 0, SPEAR1340_PLL_CFG, + SPEAR1340_PLL1_CLK_SHIFT, SPEAR1340_PLL_CLK_MASK, 0, + &_lock); + clk_register_clkdev(clk, "vco1_mux_clk", NULL); + clk = clk_register_vco_pll("vco1_clk", "pll1_clk", NULL, "vco1_mux_clk", + 0, SPEAR1340_PLL1_CTR, SPEAR1340_PLL1_FRQ, pll_rtbl, + ARRAY_SIZE(pll_rtbl), &_lock, &clk1, NULL); + clk_register_clkdev(clk, "vco1_clk", NULL); + clk_register_clkdev(clk1, "pll1_clk", NULL); + + clk = clk_register_mux(NULL, "vco2_mux_clk", vco_parents, + ARRAY_SIZE(vco_parents), 0, SPEAR1340_PLL_CFG, + SPEAR1340_PLL2_CLK_SHIFT, SPEAR1340_PLL_CLK_MASK, 0, + &_lock); + clk_register_clkdev(clk, "vco2_mux_clk", NULL); + clk = clk_register_vco_pll("vco2_clk", "pll2_clk", NULL, "vco2_mux_clk", + 0, SPEAR1340_PLL2_CTR, SPEAR1340_PLL2_FRQ, pll_rtbl, + ARRAY_SIZE(pll_rtbl), &_lock, &clk1, NULL); + clk_register_clkdev(clk, "vco2_clk", NULL); + clk_register_clkdev(clk1, "pll2_clk", NULL); + + clk = clk_register_mux(NULL, "vco3_mux_clk", vco_parents, + ARRAY_SIZE(vco_parents), 0, SPEAR1340_PLL_CFG, + SPEAR1340_PLL3_CLK_SHIFT, SPEAR1340_PLL_CLK_MASK, 0, + &_lock); + clk_register_clkdev(clk, "vco3_mux_clk", NULL); + clk = clk_register_vco_pll("vco3_clk", "pll3_clk", NULL, "vco3_mux_clk", + 0, SPEAR1340_PLL3_CTR, SPEAR1340_PLL3_FRQ, pll_rtbl, + ARRAY_SIZE(pll_rtbl), &_lock, &clk1, NULL); + clk_register_clkdev(clk, "vco3_clk", NULL); + clk_register_clkdev(clk1, "pll3_clk", NULL); + + clk = clk_register_vco_pll("vco4_clk", "pll4_clk", NULL, "osc_24m_clk", + 0, SPEAR1340_PLL4_CTR, SPEAR1340_PLL4_FRQ, pll4_rtbl, + ARRAY_SIZE(pll4_rtbl), &_lock, &clk1, NULL); + clk_register_clkdev(clk, "vco4_clk", NULL); + clk_register_clkdev(clk1, "pll4_clk", NULL); + + clk = clk_register_fixed_rate(NULL, "pll5_clk", "osc_24m_clk", 0, + 48000000); + clk_register_clkdev(clk, "pll5_clk", NULL); + + clk = clk_register_fixed_rate(NULL, "pll6_clk", "osc_25m_clk", 0, + 25000000); + clk_register_clkdev(clk, "pll6_clk", NULL); + + /* vco div n clocks */ + clk = clk_register_fixed_factor(NULL, "vco1div2_clk", "vco1_clk", 0, 1, + 2); + clk_register_clkdev(clk, "vco1div2_clk", NULL); + + clk = clk_register_fixed_factor(NULL, "vco1div4_clk", "vco1_clk", 0, 1, + 4); + clk_register_clkdev(clk, "vco1div4_clk", NULL); + + clk = clk_register_fixed_factor(NULL, "vco2div2_clk", "vco2_clk", 0, 1, + 2); + clk_register_clkdev(clk, "vco2div2_clk", NULL); + + clk = clk_register_fixed_factor(NULL, "vco3div2_clk", "vco3_clk", 0, 1, + 2); + clk_register_clkdev(clk, "vco3div2_clk", NULL); + + /* peripherals */ + clk_register_fixed_factor(NULL, "thermal_clk", "osc_24m_clk", 0, 1, + 128); + clk = clk_register_gate(NULL, "thermal_gate_clk", "thermal_clk", 0, + SPEAR1340_PERIP2_CLK_ENB, SPEAR1340_THSENS_CLK_ENB, 0, + &_lock); + clk_register_clkdev(clk, NULL, "spear_thermal"); + + /* clock derived from pll4 clk */ + clk = clk_register_fixed_factor(NULL, "ddr_clk", "pll4_clk", 0, 1, + 1); + clk_register_clkdev(clk, "ddr_clk", NULL); + + /* clock derived from pll1 clk */ + clk = clk_register_frac("sys_synth_clk", "vco1div2_clk", 0, + SPEAR1340_SYS_CLK_SYNT, sys_synth_rtbl, + ARRAY_SIZE(sys_synth_rtbl), &_lock); + clk_register_clkdev(clk, "sys_synth_clk", NULL); + + clk = clk_register_frac("amba_synth_clk", "vco1div2_clk", 0, + SPEAR1340_AMBA_CLK_SYNT, amba_synth_rtbl, + ARRAY_SIZE(amba_synth_rtbl), &_lock); + clk_register_clkdev(clk, "amba_synth_clk", NULL); + + clk = clk_register_mux(NULL, "sys_mux_clk", sys_parents, + ARRAY_SIZE(sys_parents), 0, SPEAR1340_SYS_CLK_CTRL, + SPEAR1340_SCLK_SRC_SEL_SHIFT, + SPEAR1340_SCLK_SRC_SEL_MASK, 0, &_lock); + clk_register_clkdev(clk, "sys_clk", NULL); + + clk = clk_register_fixed_factor(NULL, "cpu_clk", "sys_mux_clk", 0, 1, + 2); + clk_register_clkdev(clk, "cpu_clk", NULL); + + clk = clk_register_fixed_factor(NULL, "cpu_div3_clk", "cpu_clk", 0, 1, + 3); + clk_register_clkdev(clk, "cpu_div3_clk", NULL); + + clk = clk_register_fixed_factor(NULL, "wdt_clk", "cpu_clk", 0, 1, + 2); + clk_register_clkdev(clk, NULL, "ec800620.wdt"); + + clk = clk_register_mux(NULL, "ahb_clk", ahb_parents, + ARRAY_SIZE(ahb_parents), 0, SPEAR1340_SYS_CLK_CTRL, + SPEAR1340_HCLK_SRC_SEL_SHIFT, + SPEAR1340_HCLK_SRC_SEL_MASK, 0, &_lock); + clk_register_clkdev(clk, "ahb_clk", NULL); + + clk = clk_register_fixed_factor(NULL, "apb_clk", "ahb_clk", 0, 1, + 2); + clk_register_clkdev(clk, "apb_clk", NULL); + + /* gpt clocks */ + clk = clk_register_mux(NULL, "gpt0_mux_clk", gpt_parents, + ARRAY_SIZE(gpt_parents), 0, SPEAR1340_PERIP_CLK_CFG, + SPEAR1340_GPT0_CLK_SHIFT, SPEAR1340_GPT_CLK_MASK, 0, + &_lock); + clk_register_clkdev(clk, "gpt0_mux_clk", NULL); + clk = clk_register_gate(NULL, "gpt0_clk", "gpt0_mux_clk", 0, + SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_GPT0_CLK_ENB, 0, + &_lock); + clk_register_clkdev(clk, NULL, "gpt0"); + + clk = clk_register_mux(NULL, "gpt1_mux_clk", gpt_parents, + ARRAY_SIZE(gpt_parents), 0, SPEAR1340_PERIP_CLK_CFG, + SPEAR1340_GPT1_CLK_SHIFT, SPEAR1340_GPT_CLK_MASK, 0, + &_lock); + clk_register_clkdev(clk, "gpt1_mux_clk", NULL); + clk = clk_register_gate(NULL, "gpt1_clk", "gpt1_mux_clk", 0, + SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_GPT1_CLK_ENB, 0, + &_lock); + clk_register_clkdev(clk, NULL, "gpt1"); + + clk = clk_register_mux(NULL, "gpt2_mux_clk", gpt_parents, + ARRAY_SIZE(gpt_parents), 0, SPEAR1340_PERIP_CLK_CFG, + SPEAR1340_GPT2_CLK_SHIFT, SPEAR1340_GPT_CLK_MASK, 0, + &_lock); + clk_register_clkdev(clk, "gpt2_mux_clk", NULL); + clk = clk_register_gate(NULL, "gpt2_clk", "gpt2_mux_clk", 0, + SPEAR1340_PERIP2_CLK_ENB, SPEAR1340_GPT2_CLK_ENB, 0, + &_lock); + clk_register_clkdev(clk, NULL, "gpt2"); + + clk = clk_register_mux(NULL, "gpt3_mux_clk", gpt_parents, + ARRAY_SIZE(gpt_parents), 0, SPEAR1340_PERIP_CLK_CFG, + SPEAR1340_GPT3_CLK_SHIFT, SPEAR1340_GPT_CLK_MASK, 0, + &_lock); + clk_register_clkdev(clk, "gpt3_mux_clk", NULL); + clk = clk_register_gate(NULL, "gpt3_clk", "gpt3_mux_clk", 0, + SPEAR1340_PERIP2_CLK_ENB, SPEAR1340_GPT3_CLK_ENB, 0, + &_lock); + clk_register_clkdev(clk, NULL, "gpt3"); + + /* others */ + clk = clk_register_aux("uart0_synth_clk", "uart0_synth_gate_clk", + "vco1div2_clk", 0, SPEAR1340_UART0_CLK_SYNT, NULL, + aux_rtbl, ARRAY_SIZE(aux_rtbl), &_lock, &clk1); + clk_register_clkdev(clk, "uart0_synth_clk", NULL); + clk_register_clkdev(clk1, "uart0_synth_gate_clk", NULL); + + clk = clk_register_mux(NULL, "uart0_mux_clk", uart0_parents, + ARRAY_SIZE(uart0_parents), 0, SPEAR1340_PERIP_CLK_CFG, + SPEAR1340_UART0_CLK_SHIFT, SPEAR1340_UART_CLK_MASK, 0, + &_lock); + clk_register_clkdev(clk, "uart0_mux_clk", NULL); + + clk = clk_register_gate(NULL, "uart0_clk", "uart0_mux_clk", 0, + SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_UART0_CLK_ENB, 0, + &_lock); + clk_register_clkdev(clk, NULL, "e0000000.serial"); + + clk = clk_register_aux("uart1_synth_clk", "uart1_synth_gate_clk", + "vco1div2_clk", 0, SPEAR1340_UART1_CLK_SYNT, NULL, + aux_rtbl, ARRAY_SIZE(aux_rtbl), &_lock, &clk1); + clk_register_clkdev(clk, "uart1_synth_clk", NULL); + clk_register_clkdev(clk1, "uart1_synth_gate_clk", NULL); + + clk = clk_register_mux(NULL, "uart1_mux_clk", uart1_parents, + ARRAY_SIZE(uart1_parents), 0, SPEAR1340_PERIP_CLK_CFG, + SPEAR1340_UART1_CLK_SHIFT, SPEAR1340_UART_CLK_MASK, 0, + &_lock); + clk_register_clkdev(clk, "uart1_mux_clk", NULL); + + clk = clk_register_gate(NULL, "uart1_clk", "uart1_mux_clk", 0, + SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_UART1_CLK_ENB, 0, + &_lock); + clk_register_clkdev(clk, NULL, "b4100000.serial"); + + clk = clk_register_aux("sdhci_synth_clk", "sdhci_synth_gate_clk", + "vco1div2_clk", 0, SPEAR1340_SDHCI_CLK_SYNT, NULL, + aux_rtbl, ARRAY_SIZE(aux_rtbl), &_lock, &clk1); + clk_register_clkdev(clk, "sdhci_synth_clk", NULL); + clk_register_clkdev(clk1, "sdhci_synth_gate_clk", NULL); + + clk = clk_register_gate(NULL, "sdhci_clk", "sdhci_synth_gate_clk", 0, + SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_SDHCI_CLK_ENB, 0, + &_lock); + clk_register_clkdev(clk, NULL, "b3000000.sdhci"); + + clk = clk_register_aux("cfxd_synth_clk", "cfxd_synth_gate_clk", + "vco1div2_clk", 0, SPEAR1340_CFXD_CLK_SYNT, NULL, + aux_rtbl, ARRAY_SIZE(aux_rtbl), &_lock, &clk1); + clk_register_clkdev(clk, "cfxd_synth_clk", NULL); + clk_register_clkdev(clk1, "cfxd_synth_gate_clk", NULL); + + clk = clk_register_gate(NULL, "cfxd_clk", "cfxd_synth_gate_clk", 0, + SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_CFXD_CLK_ENB, 0, + &_lock); + clk_register_clkdev(clk, NULL, "b2800000.cf"); + clk_register_clkdev(clk, NULL, "arasan_xd"); + + clk = clk_register_aux("c3_synth_clk", "c3_synth_gate_clk", + "vco1div2_clk", 0, SPEAR1340_C3_CLK_SYNT, NULL, + aux_rtbl, ARRAY_SIZE(aux_rtbl), &_lock, &clk1); + clk_register_clkdev(clk, "c3_synth_clk", NULL); + clk_register_clkdev(clk1, "c3_synth_gate_clk", NULL); + + clk = clk_register_mux(NULL, "c3_mux_clk", c3_parents, + ARRAY_SIZE(c3_parents), 0, SPEAR1340_PERIP_CLK_CFG, + SPEAR1340_C3_CLK_SHIFT, SPEAR1340_C3_CLK_MASK, 0, + &_lock); + clk_register_clkdev(clk, "c3_mux_clk", NULL); + + clk = clk_register_gate(NULL, "c3_clk", "c3_mux_clk", 0, + SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_C3_CLK_ENB, 0, + &_lock); + clk_register_clkdev(clk, NULL, "c3"); + + /* gmac */ + clk = clk_register_mux(NULL, "gmac_phy_input_mux_clk", + gmac_phy_input_parents, + ARRAY_SIZE(gmac_phy_input_parents), 0, + SPEAR1340_GMAC_CLK_CFG, + SPEAR1340_GMAC_PHY_INPUT_CLK_SHIFT, + SPEAR1340_GMAC_PHY_INPUT_CLK_MASK, 0, &_lock); + clk_register_clkdev(clk, "gmac_phy_input_mux_clk", NULL); + + clk = clk_register_aux("gmac_phy_synth_clk", "gmac_phy_synth_gate_clk", + "gmac_phy_input_mux_clk", 0, SPEAR1340_GMAC_CLK_SYNT, + NULL, gmac_rtbl, ARRAY_SIZE(gmac_rtbl), &_lock, &clk1); + clk_register_clkdev(clk, "gmac_phy_synth_clk", NULL); + clk_register_clkdev(clk1, "gmac_phy_synth_gate_clk", NULL); + + clk = clk_register_mux(NULL, "gmac_phy_mux_clk", gmac_phy_parents, + ARRAY_SIZE(gmac_phy_parents), 0, + SPEAR1340_PERIP_CLK_CFG, SPEAR1340_GMAC_PHY_CLK_SHIFT, + SPEAR1340_GMAC_PHY_CLK_MASK, 0, &_lock); + clk_register_clkdev(clk, NULL, "stmmacphy.0"); + + /* clcd */ + clk = clk_register_mux(NULL, "clcd_synth_mux_clk", clcd_synth_parents, + ARRAY_SIZE(clcd_synth_parents), 0, + SPEAR1340_CLCD_CLK_SYNT, SPEAR1340_CLCD_SYNT_CLK_SHIFT, + SPEAR1340_CLCD_SYNT_CLK_MASK, 0, &_lock); + clk_register_clkdev(clk, "clcd_synth_mux_clk", NULL); + + clk = clk_register_frac("clcd_synth_clk", "clcd_synth_mux_clk", 0, + SPEAR1340_CLCD_CLK_SYNT, clcd_rtbl, + ARRAY_SIZE(clcd_rtbl), &_lock); + clk_register_clkdev(clk, "clcd_synth_clk", NULL); + + clk = clk_register_mux(NULL, "clcd_pixel_mux_clk", clcd_pixel_parents, + ARRAY_SIZE(clcd_pixel_parents), 0, + SPEAR1340_PERIP_CLK_CFG, SPEAR1340_CLCD_CLK_SHIFT, + SPEAR1340_CLCD_CLK_MASK, 0, &_lock); + clk_register_clkdev(clk, "clcd_pixel_clk", NULL); + + clk = clk_register_gate(NULL, "clcd_clk", "clcd_pixel_mux_clk", 0, + SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_CLCD_CLK_ENB, 0, + &_lock); + clk_register_clkdev(clk, "clcd_clk", NULL); + + /* i2s */ + clk = clk_register_mux(NULL, "i2s_src_mux_clk", i2s_src_parents, + ARRAY_SIZE(i2s_src_parents), 0, SPEAR1340_I2S_CLK_CFG, + SPEAR1340_I2S_SRC_CLK_SHIFT, SPEAR1340_I2S_SRC_CLK_MASK, + 0, &_lock); + clk_register_clkdev(clk, "i2s_src_clk", NULL); + + clk = clk_register_aux("i2s_prs1_clk", NULL, "i2s_src_mux_clk", 0, + SPEAR1340_I2S_CLK_CFG, &i2s_prs1_masks, i2s_prs1_rtbl, + ARRAY_SIZE(i2s_prs1_rtbl), &_lock, NULL); + clk_register_clkdev(clk, "i2s_prs1_clk", NULL); + + clk = clk_register_mux(NULL, "i2s_ref_mux_clk", i2s_ref_parents, + ARRAY_SIZE(i2s_ref_parents), 0, SPEAR1340_I2S_CLK_CFG, + SPEAR1340_I2S_REF_SHIFT, SPEAR1340_I2S_REF_SEL_MASK, 0, + &_lock); + clk_register_clkdev(clk, "i2s_ref_clk", NULL); + + clk = clk_register_gate(NULL, "i2s_ref_pad_clk", "i2s_ref_mux_clk", 0, + SPEAR1340_PERIP2_CLK_ENB, SPEAR1340_I2S_REF_PAD_CLK_ENB, + 0, &_lock); + clk_register_clkdev(clk, "i2s_ref_pad_clk", NULL); + + clk = clk_register_aux("i2s_sclk_clk", "i2s_sclk_gate_clk", + "i2s_ref_mux_clk", 0, SPEAR1340_I2S_CLK_CFG, + &i2s_sclk_masks, i2s_sclk_rtbl, + ARRAY_SIZE(i2s_sclk_rtbl), &_lock, &clk1); + clk_register_clkdev(clk, "i2s_sclk_clk", NULL); + clk_register_clkdev(clk1, "i2s_sclk_gate_clk", NULL); + + /* clock derived from ahb clk */ + clk = clk_register_gate(NULL, "i2c0_clk", "ahb_clk", 0, + SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_I2C0_CLK_ENB, 0, + &_lock); + clk_register_clkdev(clk, NULL, "e0280000.i2c"); + + clk = clk_register_gate(NULL, "i2c1_clk", "ahb_clk", 0, + SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_I2C1_CLK_ENB, 0, + &_lock); + clk_register_clkdev(clk, NULL, "b4000000.i2c"); + + clk = clk_register_gate(NULL, "dma_clk", "ahb_clk", 0, + SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_DMA_CLK_ENB, 0, + &_lock); + clk_register_clkdev(clk, NULL, "ea800000.dma"); + clk_register_clkdev(clk, NULL, "eb000000.dma"); + + clk = clk_register_gate(NULL, "gmac_clk", "ahb_clk", 0, + SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_GMAC_CLK_ENB, 0, + &_lock); + clk_register_clkdev(clk, NULL, "e2000000.eth"); + + clk = clk_register_gate(NULL, "fsmc_clk", "ahb_clk", 0, + SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_FSMC_CLK_ENB, 0, + &_lock); + clk_register_clkdev(clk, NULL, "b0000000.flash"); + + clk = clk_register_gate(NULL, "smi_clk", "ahb_clk", 0, + SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_SMI_CLK_ENB, 0, + &_lock); + clk_register_clkdev(clk, NULL, "ea000000.flash"); + + clk = clk_register_gate(NULL, "usbh0_clk", "ahb_clk", 0, + SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_UHC0_CLK_ENB, 0, + &_lock); + clk_register_clkdev(clk, "usbh.0_clk", NULL); + + clk = clk_register_gate(NULL, "usbh1_clk", "ahb_clk", 0, + SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_UHC1_CLK_ENB, 0, + &_lock); + clk_register_clkdev(clk, "usbh.1_clk", NULL); + + clk = clk_register_gate(NULL, "uoc_clk", "ahb_clk", 0, + SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_UOC_CLK_ENB, 0, + &_lock); + clk_register_clkdev(clk, NULL, "uoc"); + + clk = clk_register_gate(NULL, "pcie_sata_clk", "ahb_clk", 0, + SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_PCIE_SATA_CLK_ENB, + 0, &_lock); + clk_register_clkdev(clk, NULL, "dw_pcie"); + clk_register_clkdev(clk, NULL, "ahci"); + + clk = clk_register_gate(NULL, "sysram0_clk", "ahb_clk", 0, + SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_SYSRAM0_CLK_ENB, 0, + &_lock); + clk_register_clkdev(clk, "sysram0_clk", NULL); + + clk = clk_register_gate(NULL, "sysram1_clk", "ahb_clk", 0, + SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_SYSRAM1_CLK_ENB, 0, + &_lock); + clk_register_clkdev(clk, "sysram1_clk", NULL); + + clk = clk_register_aux("adc_synth_clk", "adc_synth_gate_clk", "ahb_clk", + 0, SPEAR1340_ADC_CLK_SYNT, NULL, adc_rtbl, + ARRAY_SIZE(adc_rtbl), &_lock, &clk1); + clk_register_clkdev(clk, "adc_synth_clk", NULL); + clk_register_clkdev(clk1, "adc_synth_gate_clk", NULL); + + clk = clk_register_gate(NULL, "adc_clk", "adc_synth_gate_clk", 0, + SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_ADC_CLK_ENB, 0, + &_lock); + clk_register_clkdev(clk, NULL, "adc_clk"); + + /* clock derived from apb clk */ + clk = clk_register_gate(NULL, "ssp_clk", "apb_clk", 0, + SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_SSP_CLK_ENB, 0, + &_lock); + clk_register_clkdev(clk, NULL, "e0100000.spi"); + + clk = clk_register_gate(NULL, "gpio0_clk", "apb_clk", 0, + SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_GPIO0_CLK_ENB, 0, + &_lock); + clk_register_clkdev(clk, NULL, "e0600000.gpio"); + + clk = clk_register_gate(NULL, "gpio1_clk", "apb_clk", 0, + SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_GPIO1_CLK_ENB, 0, + &_lock); + clk_register_clkdev(clk, NULL, "e0680000.gpio"); + + clk = clk_register_gate(NULL, "i2s_play_clk", "apb_clk", 0, + SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_I2S_PLAY_CLK_ENB, 0, + &_lock); + clk_register_clkdev(clk, NULL, "b2400000.i2s"); + + clk = clk_register_gate(NULL, "i2s_rec_clk", "apb_clk", 0, + SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_I2S_REC_CLK_ENB, 0, + &_lock); + clk_register_clkdev(clk, NULL, "b2000000.i2s"); + + clk = clk_register_gate(NULL, "kbd_clk", "apb_clk", 0, + SPEAR1340_PERIP2_CLK_ENB, SPEAR1340_KBD_CLK_ENB, 0, + &_lock); + clk_register_clkdev(clk, NULL, "e0300000.kbd"); + + /* RAS clks */ + clk = clk_register_mux(NULL, "gen_synth0_1_mux_clk", + gen_synth0_1_parents, ARRAY_SIZE(gen_synth0_1_parents), + 0, SPEAR1340_PLL_CFG, SPEAR1340_GEN_SYNT0_1_CLK_SHIFT, + SPEAR1340_GEN_SYNT_CLK_MASK, 0, &_lock); + clk_register_clkdev(clk, "gen_synth0_1_clk", NULL); + + clk = clk_register_mux(NULL, "gen_synth2_3_mux_clk", + gen_synth2_3_parents, ARRAY_SIZE(gen_synth2_3_parents), + 0, SPEAR1340_PLL_CFG, SPEAR1340_GEN_SYNT2_3_CLK_SHIFT, + SPEAR1340_GEN_SYNT_CLK_MASK, 0, &_lock); + clk_register_clkdev(clk, "gen_synth2_3_clk", NULL); + + clk = clk_register_frac("gen_synth0_clk", "gen_synth0_1_clk", 0, + SPEAR1340_GEN_CLK_SYNT0, gen_rtbl, ARRAY_SIZE(gen_rtbl), + &_lock); + clk_register_clkdev(clk, "gen_synth0_clk", NULL); + + clk = clk_register_frac("gen_synth1_clk", "gen_synth0_1_clk", 0, + SPEAR1340_GEN_CLK_SYNT1, gen_rtbl, ARRAY_SIZE(gen_rtbl), + &_lock); + clk_register_clkdev(clk, "gen_synth1_clk", NULL); + + clk = clk_register_frac("gen_synth2_clk", "gen_synth2_3_clk", 0, + SPEAR1340_GEN_CLK_SYNT2, gen_rtbl, ARRAY_SIZE(gen_rtbl), + &_lock); + clk_register_clkdev(clk, "gen_synth2_clk", NULL); + + clk = clk_register_frac("gen_synth3_clk", "gen_synth2_3_clk", 0, + SPEAR1340_GEN_CLK_SYNT3, gen_rtbl, ARRAY_SIZE(gen_rtbl), + &_lock); + clk_register_clkdev(clk, "gen_synth3_clk", NULL); + + clk = clk_register_gate(NULL, "mali_clk", "gen_synth3_clk", 0, + SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_MALI_CLK_ENB, 0, + &_lock); + clk_register_clkdev(clk, NULL, "mali"); + + clk = clk_register_gate(NULL, "cec0_clk", "ahb_clk", 0, + SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_CEC0_CLK_ENB, 0, + &_lock); + clk_register_clkdev(clk, NULL, "spear_cec.0"); + + clk = clk_register_gate(NULL, "cec1_clk", "ahb_clk", 0, + SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_CEC1_CLK_ENB, 0, + &_lock); + clk_register_clkdev(clk, NULL, "spear_cec.1"); + + clk = clk_register_mux(NULL, "spdif_out_mux_clk", spdif_out_parents, + ARRAY_SIZE(spdif_out_parents), 0, + SPEAR1340_PERIP_CLK_CFG, SPEAR1340_SPDIF_OUT_CLK_SHIFT, + SPEAR1340_SPDIF_CLK_MASK, 0, &_lock); + clk_register_clkdev(clk, "spdif_out_mux_clk", NULL); + + clk = clk_register_gate(NULL, "spdif_out_clk", "spdif_out_mux_clk", 0, + SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_SPDIF_OUT_CLK_ENB, + 0, &_lock); + clk_register_clkdev(clk, NULL, "spdif-out"); + + clk = clk_register_mux(NULL, "spdif_in_mux_clk", spdif_in_parents, + ARRAY_SIZE(spdif_in_parents), 0, + SPEAR1340_PERIP_CLK_CFG, SPEAR1340_SPDIF_IN_CLK_SHIFT, + SPEAR1340_SPDIF_CLK_MASK, 0, &_lock); + clk_register_clkdev(clk, "spdif_in_mux_clk", NULL); + + clk = clk_register_gate(NULL, "spdif_in_clk", "spdif_in_mux_clk", 0, + SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_SPDIF_IN_CLK_ENB, 0, + &_lock); + clk_register_clkdev(clk, NULL, "spdif-in"); + + clk = clk_register_gate(NULL, "acp_clk", "acp_mux_clk", 0, + SPEAR1340_PERIP2_CLK_ENB, SPEAR1340_ACP_CLK_ENB, 0, + &_lock); + clk_register_clkdev(clk, NULL, "acp_clk"); + + clk = clk_register_gate(NULL, "plgpio_clk", "plgpio_mux_clk", 0, + SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_PLGPIO_CLK_ENB, 0, + &_lock); + clk_register_clkdev(clk, NULL, "plgpio"); + + clk = clk_register_gate(NULL, "video_dec_clk", "video_dec_mux_clk", 0, + SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_VIDEO_DEC_CLK_ENB, + 0, &_lock); + clk_register_clkdev(clk, NULL, "video_dec"); + + clk = clk_register_gate(NULL, "video_enc_clk", "video_enc_mux_clk", 0, + SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_VIDEO_ENC_CLK_ENB, + 0, &_lock); + clk_register_clkdev(clk, NULL, "video_enc"); + + clk = clk_register_gate(NULL, "video_in_clk", "video_in_mux_clk", 0, + SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_VIDEO_IN_CLK_ENB, 0, + &_lock); + clk_register_clkdev(clk, NULL, "spear_vip"); + + clk = clk_register_gate(NULL, "cam0_clk", "cam0_mux_clk", 0, + SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_CAM0_CLK_ENB, 0, + &_lock); + clk_register_clkdev(clk, NULL, "spear_camif.0"); + + clk = clk_register_gate(NULL, "cam1_clk", "cam1_mux_clk", 0, + SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_CAM1_CLK_ENB, 0, + &_lock); + clk_register_clkdev(clk, NULL, "spear_camif.1"); + + clk = clk_register_gate(NULL, "cam2_clk", "cam2_mux_clk", 0, + SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_CAM2_CLK_ENB, 0, + &_lock); + clk_register_clkdev(clk, NULL, "spear_camif.2"); + + clk = clk_register_gate(NULL, "cam3_clk", "cam3_mux_clk", 0, + SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_CAM3_CLK_ENB, 0, + &_lock); + clk_register_clkdev(clk, NULL, "spear_camif.3"); + + clk = clk_register_gate(NULL, "pwm_clk", "pwm_mux_clk", 0, + SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_PWM_CLK_ENB, 0, + &_lock); + clk_register_clkdev(clk, NULL, "pwm"); +} -- cgit v1.2.3 From d1e77afe9d647174428de7d29be85a13f94f645b Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Thu, 5 Apr 2012 18:59:23 +0530 Subject: pinctrl: SPEAr: Create macro for declaring GPIO PINS Same GPIO pins declarations would be required for other SoCs and that will be a lot of lines of code. Its better to create common macros for it. Signed-off-by: Viresh Kumar Acked-by: Linus Walleij --- drivers/pinctrl/spear/pinctrl-spear.h | 105 +++++++++++++++++++++++++++++++ drivers/pinctrl/spear/pinctrl-spear3xx.c | 103 +----------------------------- 2 files changed, 106 insertions(+), 102 deletions(-) diff --git a/drivers/pinctrl/spear/pinctrl-spear.h b/drivers/pinctrl/spear/pinctrl-spear.h index 47a6b5b72f90..1f51dc9fbb62 100644 --- a/drivers/pinctrl/spear/pinctrl-spear.h +++ b/drivers/pinctrl/spear/pinctrl-spear.h @@ -139,4 +139,109 @@ void __devinit pmx_init_addr(struct spear_pinctrl_machdata *machdata, u16 reg); int __devinit spear_pinctrl_probe(struct platform_device *pdev, struct spear_pinctrl_machdata *machdata); int __devexit spear_pinctrl_remove(struct platform_device *pdev); + +#define SPEAR_PIN_0_TO_101 \ + PINCTRL_PIN(0, "PLGPIO0"), \ + PINCTRL_PIN(1, "PLGPIO1"), \ + PINCTRL_PIN(2, "PLGPIO2"), \ + PINCTRL_PIN(3, "PLGPIO3"), \ + PINCTRL_PIN(4, "PLGPIO4"), \ + PINCTRL_PIN(5, "PLGPIO5"), \ + PINCTRL_PIN(6, "PLGPIO6"), \ + PINCTRL_PIN(7, "PLGPIO7"), \ + PINCTRL_PIN(8, "PLGPIO8"), \ + PINCTRL_PIN(9, "PLGPIO9"), \ + PINCTRL_PIN(10, "PLGPIO10"), \ + PINCTRL_PIN(11, "PLGPIO11"), \ + PINCTRL_PIN(12, "PLGPIO12"), \ + PINCTRL_PIN(13, "PLGPIO13"), \ + PINCTRL_PIN(14, "PLGPIO14"), \ + PINCTRL_PIN(15, "PLGPIO15"), \ + PINCTRL_PIN(16, "PLGPIO16"), \ + PINCTRL_PIN(17, "PLGPIO17"), \ + PINCTRL_PIN(18, "PLGPIO18"), \ + PINCTRL_PIN(19, "PLGPIO19"), \ + PINCTRL_PIN(20, "PLGPIO20"), \ + PINCTRL_PIN(21, "PLGPIO21"), \ + PINCTRL_PIN(22, "PLGPIO22"), \ + PINCTRL_PIN(23, "PLGPIO23"), \ + PINCTRL_PIN(24, "PLGPIO24"), \ + PINCTRL_PIN(25, "PLGPIO25"), \ + PINCTRL_PIN(26, "PLGPIO26"), \ + PINCTRL_PIN(27, "PLGPIO27"), \ + PINCTRL_PIN(28, "PLGPIO28"), \ + PINCTRL_PIN(29, "PLGPIO29"), \ + PINCTRL_PIN(30, "PLGPIO30"), \ + PINCTRL_PIN(31, "PLGPIO31"), \ + PINCTRL_PIN(32, "PLGPIO32"), \ + PINCTRL_PIN(33, "PLGPIO33"), \ + PINCTRL_PIN(34, "PLGPIO34"), \ + PINCTRL_PIN(35, "PLGPIO35"), \ + PINCTRL_PIN(36, "PLGPIO36"), \ + PINCTRL_PIN(37, "PLGPIO37"), \ + PINCTRL_PIN(38, "PLGPIO38"), \ + PINCTRL_PIN(39, "PLGPIO39"), \ + PINCTRL_PIN(40, "PLGPIO40"), \ + PINCTRL_PIN(41, "PLGPIO41"), \ + PINCTRL_PIN(42, "PLGPIO42"), \ + PINCTRL_PIN(43, "PLGPIO43"), \ + PINCTRL_PIN(44, "PLGPIO44"), \ + PINCTRL_PIN(45, "PLGPIO45"), \ + PINCTRL_PIN(46, "PLGPIO46"), \ + PINCTRL_PIN(47, "PLGPIO47"), \ + PINCTRL_PIN(48, "PLGPIO48"), \ + PINCTRL_PIN(49, "PLGPIO49"), \ + PINCTRL_PIN(50, "PLGPIO50"), \ + PINCTRL_PIN(51, "PLGPIO51"), \ + PINCTRL_PIN(52, "PLGPIO52"), \ + PINCTRL_PIN(53, "PLGPIO53"), \ + PINCTRL_PIN(54, "PLGPIO54"), \ + PINCTRL_PIN(55, "PLGPIO55"), \ + PINCTRL_PIN(56, "PLGPIO56"), \ + PINCTRL_PIN(57, "PLGPIO57"), \ + PINCTRL_PIN(58, "PLGPIO58"), \ + PINCTRL_PIN(59, "PLGPIO59"), \ + PINCTRL_PIN(60, "PLGPIO60"), \ + PINCTRL_PIN(61, "PLGPIO61"), \ + PINCTRL_PIN(62, "PLGPIO62"), \ + PINCTRL_PIN(63, "PLGPIO63"), \ + PINCTRL_PIN(64, "PLGPIO64"), \ + PINCTRL_PIN(65, "PLGPIO65"), \ + PINCTRL_PIN(66, "PLGPIO66"), \ + PINCTRL_PIN(67, "PLGPIO67"), \ + PINCTRL_PIN(68, "PLGPIO68"), \ + PINCTRL_PIN(69, "PLGPIO69"), \ + PINCTRL_PIN(70, "PLGPIO70"), \ + PINCTRL_PIN(71, "PLGPIO71"), \ + PINCTRL_PIN(72, "PLGPIO72"), \ + PINCTRL_PIN(73, "PLGPIO73"), \ + PINCTRL_PIN(74, "PLGPIO74"), \ + PINCTRL_PIN(75, "PLGPIO75"), \ + PINCTRL_PIN(76, "PLGPIO76"), \ + PINCTRL_PIN(77, "PLGPIO77"), \ + PINCTRL_PIN(78, "PLGPIO78"), \ + PINCTRL_PIN(79, "PLGPIO79"), \ + PINCTRL_PIN(80, "PLGPIO80"), \ + PINCTRL_PIN(81, "PLGPIO81"), \ + PINCTRL_PIN(82, "PLGPIO82"), \ + PINCTRL_PIN(83, "PLGPIO83"), \ + PINCTRL_PIN(84, "PLGPIO84"), \ + PINCTRL_PIN(85, "PLGPIO85"), \ + PINCTRL_PIN(86, "PLGPIO86"), \ + PINCTRL_PIN(87, "PLGPIO87"), \ + PINCTRL_PIN(88, "PLGPIO88"), \ + PINCTRL_PIN(89, "PLGPIO89"), \ + PINCTRL_PIN(90, "PLGPIO90"), \ + PINCTRL_PIN(91, "PLGPIO91"), \ + PINCTRL_PIN(92, "PLGPIO92"), \ + PINCTRL_PIN(93, "PLGPIO93"), \ + PINCTRL_PIN(94, "PLGPIO94"), \ + PINCTRL_PIN(95, "PLGPIO95"), \ + PINCTRL_PIN(96, "PLGPIO96"), \ + PINCTRL_PIN(97, "PLGPIO97"), \ + PINCTRL_PIN(98, "PLGPIO98"), \ + PINCTRL_PIN(99, "PLGPIO99"), \ + PINCTRL_PIN(100, "PLGPIO100"), \ + PINCTRL_PIN(101, "PLGPIO101") + #endif /* __PINMUX_SPEAR_H__ */ diff --git a/drivers/pinctrl/spear/pinctrl-spear3xx.c b/drivers/pinctrl/spear/pinctrl-spear3xx.c index 832049a8b1c9..91c883bc46a6 100644 --- a/drivers/pinctrl/spear/pinctrl-spear3xx.c +++ b/drivers/pinctrl/spear/pinctrl-spear3xx.c @@ -15,108 +15,7 @@ /* pins */ static const struct pinctrl_pin_desc spear3xx_pins[] = { - PINCTRL_PIN(0, "PLGPIO0"), - PINCTRL_PIN(1, "PLGPIO1"), - PINCTRL_PIN(2, "PLGPIO2"), - PINCTRL_PIN(3, "PLGPIO3"), - PINCTRL_PIN(4, "PLGPIO4"), - PINCTRL_PIN(5, "PLGPIO5"), - PINCTRL_PIN(6, "PLGPIO6"), - PINCTRL_PIN(7, "PLGPIO7"), - PINCTRL_PIN(8, "PLGPIO8"), - PINCTRL_PIN(9, "PLGPIO9"), - PINCTRL_PIN(10, "PLGPIO10"), - PINCTRL_PIN(11, "PLGPIO11"), - PINCTRL_PIN(12, "PLGPIO12"), - PINCTRL_PIN(13, "PLGPIO13"), - PINCTRL_PIN(14, "PLGPIO14"), - PINCTRL_PIN(15, "PLGPIO15"), - PINCTRL_PIN(16, "PLGPIO16"), - PINCTRL_PIN(17, "PLGPIO17"), - PINCTRL_PIN(18, "PLGPIO18"), - PINCTRL_PIN(19, "PLGPIO19"), - PINCTRL_PIN(20, "PLGPIO20"), - PINCTRL_PIN(21, "PLGPIO21"), - PINCTRL_PIN(22, "PLGPIO22"), - PINCTRL_PIN(23, "PLGPIO23"), - PINCTRL_PIN(24, "PLGPIO24"), - PINCTRL_PIN(25, "PLGPIO25"), - PINCTRL_PIN(26, "PLGPIO26"), - PINCTRL_PIN(27, "PLGPIO27"), - PINCTRL_PIN(28, "PLGPIO28"), - PINCTRL_PIN(29, "PLGPIO29"), - PINCTRL_PIN(30, "PLGPIO30"), - PINCTRL_PIN(31, "PLGPIO31"), - PINCTRL_PIN(32, "PLGPIO32"), - PINCTRL_PIN(33, "PLGPIO33"), - PINCTRL_PIN(34, "PLGPIO34"), - PINCTRL_PIN(35, "PLGPIO35"), - PINCTRL_PIN(36, "PLGPIO36"), - PINCTRL_PIN(37, "PLGPIO37"), - PINCTRL_PIN(38, "PLGPIO38"), - PINCTRL_PIN(39, "PLGPIO39"), - PINCTRL_PIN(40, "PLGPIO40"), - PINCTRL_PIN(41, "PLGPIO41"), - PINCTRL_PIN(42, "PLGPIO42"), - PINCTRL_PIN(43, "PLGPIO43"), - PINCTRL_PIN(44, "PLGPIO44"), - PINCTRL_PIN(45, "PLGPIO45"), - PINCTRL_PIN(46, "PLGPIO46"), - PINCTRL_PIN(47, "PLGPIO47"), - PINCTRL_PIN(48, "PLGPIO48"), - PINCTRL_PIN(49, "PLGPIO49"), - PINCTRL_PIN(50, "PLGPIO50"), - PINCTRL_PIN(51, "PLGPIO51"), - PINCTRL_PIN(52, "PLGPIO52"), - PINCTRL_PIN(53, "PLGPIO53"), - PINCTRL_PIN(54, "PLGPIO54"), - PINCTRL_PIN(55, "PLGPIO55"), - PINCTRL_PIN(56, "PLGPIO56"), - PINCTRL_PIN(57, "PLGPIO57"), - PINCTRL_PIN(58, "PLGPIO58"), - PINCTRL_PIN(59, "PLGPIO59"), - PINCTRL_PIN(60, "PLGPIO60"), - PINCTRL_PIN(61, "PLGPIO61"), - PINCTRL_PIN(62, "PLGPIO62"), - PINCTRL_PIN(63, "PLGPIO63"), - PINCTRL_PIN(64, "PLGPIO64"), - PINCTRL_PIN(65, "PLGPIO65"), - PINCTRL_PIN(66, "PLGPIO66"), - PINCTRL_PIN(67, "PLGPIO67"), - PINCTRL_PIN(68, "PLGPIO68"), - PINCTRL_PIN(69, "PLGPIO69"), - PINCTRL_PIN(70, "PLGPIO70"), - PINCTRL_PIN(71, "PLGPIO71"), - PINCTRL_PIN(72, "PLGPIO72"), - PINCTRL_PIN(73, "PLGPIO73"), - PINCTRL_PIN(74, "PLGPIO74"), - PINCTRL_PIN(75, "PLGPIO75"), - PINCTRL_PIN(76, "PLGPIO76"), - PINCTRL_PIN(77, "PLGPIO77"), - PINCTRL_PIN(78, "PLGPIO78"), - PINCTRL_PIN(79, "PLGPIO79"), - PINCTRL_PIN(80, "PLGPIO80"), - PINCTRL_PIN(81, "PLGPIO81"), - PINCTRL_PIN(82, "PLGPIO82"), - PINCTRL_PIN(83, "PLGPIO83"), - PINCTRL_PIN(84, "PLGPIO84"), - PINCTRL_PIN(85, "PLGPIO85"), - PINCTRL_PIN(86, "PLGPIO86"), - PINCTRL_PIN(87, "PLGPIO87"), - PINCTRL_PIN(88, "PLGPIO88"), - PINCTRL_PIN(89, "PLGPIO89"), - PINCTRL_PIN(90, "PLGPIO90"), - PINCTRL_PIN(91, "PLGPIO91"), - PINCTRL_PIN(92, "PLGPIO92"), - PINCTRL_PIN(93, "PLGPIO93"), - PINCTRL_PIN(94, "PLGPIO94"), - PINCTRL_PIN(95, "PLGPIO95"), - PINCTRL_PIN(96, "PLGPIO96"), - PINCTRL_PIN(97, "PLGPIO97"), - PINCTRL_PIN(98, "PLGPIO98"), - PINCTRL_PIN(99, "PLGPIO99"), - PINCTRL_PIN(100, "PLGPIO100"), - PINCTRL_PIN(101, "PLGPIO101"), + SPEAR_PIN_0_TO_101, }; /* firda_pins */ -- cgit v1.2.3 From 85ed41a76f7a3939b55872f39df841039321f033 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Wed, 28 Mar 2012 22:27:07 +0530 Subject: pinctrl: Add SPEAr13xx pinctrl drivers This adds pinctrl driver for SPEAr13xx family. SPEAr13xx family supports two machines: SPEAr1310 and SPEAr1340. Signed-off-by: Viresh Kumar Acked-by: Linus Walleij --- .../devicetree/bindings/pinctrl/pinctrl_spear.txt | 47 + arch/arm/mach-spear13xx/Kconfig | 2 + drivers/pinctrl/spear/Kconfig | 10 + drivers/pinctrl/spear/Makefile | 2 + drivers/pinctrl/spear/pinctrl-spear.h | 146 ++ drivers/pinctrl/spear/pinctrl-spear1310.c | 2198 ++++++++++++++++++++ drivers/pinctrl/spear/pinctrl-spear1340.c | 1989 ++++++++++++++++++ 7 files changed, 4394 insertions(+) create mode 100644 drivers/pinctrl/spear/pinctrl-spear1310.c create mode 100644 drivers/pinctrl/spear/pinctrl-spear1340.c diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl_spear.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl_spear.txt index 3664d37e6799..b4480d5c3aca 100644 --- a/Documentation/devicetree/bindings/pinctrl/pinctrl_spear.txt +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl_spear.txt @@ -4,6 +4,8 @@ Required properties: - compatible : "st,spear300-pinmux" : "st,spear310-pinmux" : "st,spear320-pinmux" + : "st,spear1310-pinmux" + : "st,spear1340-pinmux" - reg : Address range of the pinctrl registers - st,pinmux-mode: Mandatory for SPEAr300 and SPEAr320 and invalid for others. - Its values for SPEAr300: @@ -89,6 +91,37 @@ For SPEAr320 machines: "rmii0_1_grp", "i2c1_8_9_grp", "i2c1_98_99_grp", "i2c2_0_1_grp", "i2c2_2_3_grp", "i2c2_19_20_grp", "i2c2_75_76_grp", "i2c2_96_97_grp" +For SPEAr1310 machines: + "i2c0_grp", "ssp0_grp", "ssp0_cs0_grp", "ssp0_cs1_2_grp", "i2s0_grp", + "i2s1_grp", "clcd_grp", "clcd_high_res_grp", "arm_gpio_grp", + "smi_2_chips_grp", "smi_4_chips_grp", "gmii_grp", "rgmii_grp", + "smii_0_1_2_grp", "ras_mii_txclk_grp", "nand_8bit_grp", + "nand_16bit_grp", "nand_4_chips_grp", "keyboard_6x6_grp", + "keyboard_rowcol6_8_grp", "uart0_grp", "uart0_modem_grp", + "gpt0_tmr0_grp", "gpt0_tmr1_grp", "gpt1_tmr0_grp", "gpt1_tmr1_grp", + "sdhci_grp", "cf_grp", "xd_grp", "touch_xy_grp", + "uart1_disable_i2c_grp", "uart1_disable_sd_grp", "uart2_3_grp", + "uart4_grp", "uart5_grp", "rs485_0_1_tdm_0_1_grp", "i2c_1_2_grp", + "i2c3_dis_smi_clcd_grp", "i2c3_dis_sd_i2s0_grp", "i2c_4_5_dis_smi_grp", + "i2c4_dis_sd_grp", "i2c5_dis_sd_grp", "i2c_6_7_dis_kbd_grp", + "i2c6_dis_sd_grp", "i2c7_dis_sd_grp", "can0_dis_nor_grp", + "can0_dis_sd_grp", "can1_dis_sd_grp", "can1_dis_kbd_grp", "pcie0_grp", + "pcie1_grp", "pcie2_grp", "sata0_grp", "sata1_grp", "sata2_grp", + "ssp1_dis_kbd_grp", "ssp1_dis_sd_grp", "gpt64_grp" + +For SPEAr1340 machines: + "pads_as_gpio_grp", "fsmc_8bit_grp", "fsmc_16bit_grp", "fsmc_pnor_grp", + "keyboard_row_col_grp", "keyboard_col5_grp", "spdif_in_grp", + "spdif_out_grp", "gpt_0_1_grp", "pwm0_grp", "pwm1_grp", "pwm2_grp", + "pwm3_grp", "vip_mux_grp", "vip_mux_cam0_grp", "vip_mux_cam1_grp", + "vip_mux_cam2_grp", "vip_mux_cam3_grp", "cam0_grp", "cam1_grp", + "cam2_grp", "cam3_grp", "smi_grp", "ssp0_grp", "ssp0_cs1_grp", + "ssp0_cs2_grp", "ssp0_cs3_grp", "uart0_grp", "uart0_enh_grp", + "uart1_grp", "i2s_in_grp", "i2s_out_grp", "gmii_grp", "rgmii_grp", + "rmii_grp", "sgmii_grp", "i2c0_grp", "i2c1_grp", "cec0_grp", "cec1_grp", + "sdhci_grp", "cf_grp", "xd_grp", "clcd_grp", "arm_trace_grp", + "miphy_dbg_grp", "pcie_grp", "sata_grp" + Valid values for function names are: For All SPEAr3xx machines: "firda", "i2c0", "ssp_cs", "ssp0", "mii0", "gpio0", "uart0_ext", @@ -106,3 +139,17 @@ For SPEAr320 machines: "uart2", "uart3", "uart4", "uart5", "uart6", "rs485", "touchscreen", "can0", "can1", "pwm0_1", "pwm2", "pwm3", "ssp1", "ssp2", "mii2", "mii0_1", "i2c1", "i2c2" + + +For SPEAr1310 machines: + "i2c0", "ssp0", "i2s0", "i2s1", "clcd", "arm_gpio", "smi", "gmii", + "rgmii", "smii_0_1_2", "ras_mii_txclk", "nand", "keyboard", "uart0", + "gpt0", "gpt1", "sdhci", "cf", "xd", "touchscreen", "uart1", "uart2_3", + "uart4", "uart5", "rs485_0_1_tdm_0_1", "i2c_1_2", "i2c3_i2s1", + "i2c_4_5", "i2c_6_7", "can0", "can1", "pci", "sata", "ssp1", "gpt64" + +For SPEAr1340 machines: + "pads_as_gpio", "fsmc", "keyboard", "spdif_in", "spdif_out", "gpt_0_1", + "pwm", "vip", "cam0", "cam1", "cam2", "cam3", "smi", "ssp0", "uart0", + "uart1", "i2s", "gmac", "i2c0", "i2c1", "cec0", "cec1", "sdhci", "cf", + "xd", "clcd", "arm_trace", "miphy_dbg", "pcie", "sata" diff --git a/arch/arm/mach-spear13xx/Kconfig b/arch/arm/mach-spear13xx/Kconfig index 138e8918f3e0..eaadc66d96b3 100644 --- a/arch/arm/mach-spear13xx/Kconfig +++ b/arch/arm/mach-spear13xx/Kconfig @@ -7,11 +7,13 @@ if ARCH_SPEAR13XX menu "SPEAr13xx Implementations" config MACH_SPEAR1310 bool "SPEAr1310 Machine support with Device Tree" + select PINCTRL_SPEAR1310 help Supports ST SPEAr1310 machine configured via the device-tree config MACH_SPEAR1340 bool "SPEAr1340 Machine support with Device Tree" + select PINCTRL_SPEAR1340 help Supports ST SPEAr1340 machine configured via the device-tree endmenu diff --git a/drivers/pinctrl/spear/Kconfig b/drivers/pinctrl/spear/Kconfig index 6a2596b4f359..91558791e766 100644 --- a/drivers/pinctrl/spear/Kconfig +++ b/drivers/pinctrl/spear/Kconfig @@ -31,4 +31,14 @@ config PINCTRL_SPEAR320 depends on MACH_SPEAR320 select PINCTRL_SPEAR3XX +config PINCTRL_SPEAR1310 + bool "ST Microelectronics SPEAr1310 SoC pin controller driver" + depends on MACH_SPEAR1310 + select PINCTRL_SPEAR + +config PINCTRL_SPEAR1340 + bool "ST Microelectronics SPEAr1340 SoC pin controller driver" + depends on MACH_SPEAR1340 + select PINCTRL_SPEAR + endif diff --git a/drivers/pinctrl/spear/Makefile b/drivers/pinctrl/spear/Makefile index 15dcb85da22d..b28a7ba22443 100644 --- a/drivers/pinctrl/spear/Makefile +++ b/drivers/pinctrl/spear/Makefile @@ -5,3 +5,5 @@ obj-$(CONFIG_PINCTRL_SPEAR3XX) += pinctrl-spear3xx.o obj-$(CONFIG_PINCTRL_SPEAR300) += pinctrl-spear300.o obj-$(CONFIG_PINCTRL_SPEAR310) += pinctrl-spear310.o obj-$(CONFIG_PINCTRL_SPEAR320) += pinctrl-spear320.o +obj-$(CONFIG_PINCTRL_SPEAR1310) += pinctrl-spear1310.o +obj-$(CONFIG_PINCTRL_SPEAR1340) += pinctrl-spear1340.o diff --git a/drivers/pinctrl/spear/pinctrl-spear.h b/drivers/pinctrl/spear/pinctrl-spear.h index 1f51dc9fbb62..9155783bb47f 100644 --- a/drivers/pinctrl/spear/pinctrl-spear.h +++ b/drivers/pinctrl/spear/pinctrl-spear.h @@ -244,4 +244,150 @@ int __devexit spear_pinctrl_remove(struct platform_device *pdev); PINCTRL_PIN(100, "PLGPIO100"), \ PINCTRL_PIN(101, "PLGPIO101") +#define SPEAR_PIN_102_TO_245 \ + PINCTRL_PIN(102, "PLGPIO102"), \ + PINCTRL_PIN(103, "PLGPIO103"), \ + PINCTRL_PIN(104, "PLGPIO104"), \ + PINCTRL_PIN(105, "PLGPIO105"), \ + PINCTRL_PIN(106, "PLGPIO106"), \ + PINCTRL_PIN(107, "PLGPIO107"), \ + PINCTRL_PIN(108, "PLGPIO108"), \ + PINCTRL_PIN(109, "PLGPIO109"), \ + PINCTRL_PIN(110, "PLGPIO110"), \ + PINCTRL_PIN(111, "PLGPIO111"), \ + PINCTRL_PIN(112, "PLGPIO112"), \ + PINCTRL_PIN(113, "PLGPIO113"), \ + PINCTRL_PIN(114, "PLGPIO114"), \ + PINCTRL_PIN(115, "PLGPIO115"), \ + PINCTRL_PIN(116, "PLGPIO116"), \ + PINCTRL_PIN(117, "PLGPIO117"), \ + PINCTRL_PIN(118, "PLGPIO118"), \ + PINCTRL_PIN(119, "PLGPIO119"), \ + PINCTRL_PIN(120, "PLGPIO120"), \ + PINCTRL_PIN(121, "PLGPIO121"), \ + PINCTRL_PIN(122, "PLGPIO122"), \ + PINCTRL_PIN(123, "PLGPIO123"), \ + PINCTRL_PIN(124, "PLGPIO124"), \ + PINCTRL_PIN(125, "PLGPIO125"), \ + PINCTRL_PIN(126, "PLGPIO126"), \ + PINCTRL_PIN(127, "PLGPIO127"), \ + PINCTRL_PIN(128, "PLGPIO128"), \ + PINCTRL_PIN(129, "PLGPIO129"), \ + PINCTRL_PIN(130, "PLGPIO130"), \ + PINCTRL_PIN(131, "PLGPIO131"), \ + PINCTRL_PIN(132, "PLGPIO132"), \ + PINCTRL_PIN(133, "PLGPIO133"), \ + PINCTRL_PIN(134, "PLGPIO134"), \ + PINCTRL_PIN(135, "PLGPIO135"), \ + PINCTRL_PIN(136, "PLGPIO136"), \ + PINCTRL_PIN(137, "PLGPIO137"), \ + PINCTRL_PIN(138, "PLGPIO138"), \ + PINCTRL_PIN(139, "PLGPIO139"), \ + PINCTRL_PIN(140, "PLGPIO140"), \ + PINCTRL_PIN(141, "PLGPIO141"), \ + PINCTRL_PIN(142, "PLGPIO142"), \ + PINCTRL_PIN(143, "PLGPIO143"), \ + PINCTRL_PIN(144, "PLGPIO144"), \ + PINCTRL_PIN(145, "PLGPIO145"), \ + PINCTRL_PIN(146, "PLGPIO146"), \ + PINCTRL_PIN(147, "PLGPIO147"), \ + PINCTRL_PIN(148, "PLGPIO148"), \ + PINCTRL_PIN(149, "PLGPIO149"), \ + PINCTRL_PIN(150, "PLGPIO150"), \ + PINCTRL_PIN(151, "PLGPIO151"), \ + PINCTRL_PIN(152, "PLGPIO152"), \ + PINCTRL_PIN(153, "PLGPIO153"), \ + PINCTRL_PIN(154, "PLGPIO154"), \ + PINCTRL_PIN(155, "PLGPIO155"), \ + PINCTRL_PIN(156, "PLGPIO156"), \ + PINCTRL_PIN(157, "PLGPIO157"), \ + PINCTRL_PIN(158, "PLGPIO158"), \ + PINCTRL_PIN(159, "PLGPIO159"), \ + PINCTRL_PIN(160, "PLGPIO160"), \ + PINCTRL_PIN(161, "PLGPIO161"), \ + PINCTRL_PIN(162, "PLGPIO162"), \ + PINCTRL_PIN(163, "PLGPIO163"), \ + PINCTRL_PIN(164, "PLGPIO164"), \ + PINCTRL_PIN(165, "PLGPIO165"), \ + PINCTRL_PIN(166, "PLGPIO166"), \ + PINCTRL_PIN(167, "PLGPIO167"), \ + PINCTRL_PIN(168, "PLGPIO168"), \ + PINCTRL_PIN(169, "PLGPIO169"), \ + PINCTRL_PIN(170, "PLGPIO170"), \ + PINCTRL_PIN(171, "PLGPIO171"), \ + PINCTRL_PIN(172, "PLGPIO172"), \ + PINCTRL_PIN(173, "PLGPIO173"), \ + PINCTRL_PIN(174, "PLGPIO174"), \ + PINCTRL_PIN(175, "PLGPIO175"), \ + PINCTRL_PIN(176, "PLGPIO176"), \ + PINCTRL_PIN(177, "PLGPIO177"), \ + PINCTRL_PIN(178, "PLGPIO178"), \ + PINCTRL_PIN(179, "PLGPIO179"), \ + PINCTRL_PIN(180, "PLGPIO180"), \ + PINCTRL_PIN(181, "PLGPIO181"), \ + PINCTRL_PIN(182, "PLGPIO182"), \ + PINCTRL_PIN(183, "PLGPIO183"), \ + PINCTRL_PIN(184, "PLGPIO184"), \ + PINCTRL_PIN(185, "PLGPIO185"), \ + PINCTRL_PIN(186, "PLGPIO186"), \ + PINCTRL_PIN(187, "PLGPIO187"), \ + PINCTRL_PIN(188, "PLGPIO188"), \ + PINCTRL_PIN(189, "PLGPIO189"), \ + PINCTRL_PIN(190, "PLGPIO190"), \ + PINCTRL_PIN(191, "PLGPIO191"), \ + PINCTRL_PIN(192, "PLGPIO192"), \ + PINCTRL_PIN(193, "PLGPIO193"), \ + PINCTRL_PIN(194, "PLGPIO194"), \ + PINCTRL_PIN(195, "PLGPIO195"), \ + PINCTRL_PIN(196, "PLGPIO196"), \ + PINCTRL_PIN(197, "PLGPIO197"), \ + PINCTRL_PIN(198, "PLGPIO198"), \ + PINCTRL_PIN(199, "PLGPIO199"), \ + PINCTRL_PIN(200, "PLGPIO200"), \ + PINCTRL_PIN(201, "PLGPIO201"), \ + PINCTRL_PIN(202, "PLGPIO202"), \ + PINCTRL_PIN(203, "PLGPIO203"), \ + PINCTRL_PIN(204, "PLGPIO204"), \ + PINCTRL_PIN(205, "PLGPIO205"), \ + PINCTRL_PIN(206, "PLGPIO206"), \ + PINCTRL_PIN(207, "PLGPIO207"), \ + PINCTRL_PIN(208, "PLGPIO208"), \ + PINCTRL_PIN(209, "PLGPIO209"), \ + PINCTRL_PIN(210, "PLGPIO210"), \ + PINCTRL_PIN(211, "PLGPIO211"), \ + PINCTRL_PIN(212, "PLGPIO212"), \ + PINCTRL_PIN(213, "PLGPIO213"), \ + PINCTRL_PIN(214, "PLGPIO214"), \ + PINCTRL_PIN(215, "PLGPIO215"), \ + PINCTRL_PIN(216, "PLGPIO216"), \ + PINCTRL_PIN(217, "PLGPIO217"), \ + PINCTRL_PIN(218, "PLGPIO218"), \ + PINCTRL_PIN(219, "PLGPIO219"), \ + PINCTRL_PIN(220, "PLGPIO220"), \ + PINCTRL_PIN(221, "PLGPIO221"), \ + PINCTRL_PIN(222, "PLGPIO222"), \ + PINCTRL_PIN(223, "PLGPIO223"), \ + PINCTRL_PIN(224, "PLGPIO224"), \ + PINCTRL_PIN(225, "PLGPIO225"), \ + PINCTRL_PIN(226, "PLGPIO226"), \ + PINCTRL_PIN(227, "PLGPIO227"), \ + PINCTRL_PIN(228, "PLGPIO228"), \ + PINCTRL_PIN(229, "PLGPIO229"), \ + PINCTRL_PIN(230, "PLGPIO230"), \ + PINCTRL_PIN(231, "PLGPIO231"), \ + PINCTRL_PIN(232, "PLGPIO232"), \ + PINCTRL_PIN(233, "PLGPIO233"), \ + PINCTRL_PIN(234, "PLGPIO234"), \ + PINCTRL_PIN(235, "PLGPIO235"), \ + PINCTRL_PIN(236, "PLGPIO236"), \ + PINCTRL_PIN(237, "PLGPIO237"), \ + PINCTRL_PIN(238, "PLGPIO238"), \ + PINCTRL_PIN(239, "PLGPIO239"), \ + PINCTRL_PIN(240, "PLGPIO240"), \ + PINCTRL_PIN(241, "PLGPIO241"), \ + PINCTRL_PIN(242, "PLGPIO242"), \ + PINCTRL_PIN(243, "PLGPIO243"), \ + PINCTRL_PIN(244, "PLGPIO244"), \ + PINCTRL_PIN(245, "PLGPIO245") + #endif /* __PINMUX_SPEAR_H__ */ diff --git a/drivers/pinctrl/spear/pinctrl-spear1310.c b/drivers/pinctrl/spear/pinctrl-spear1310.c new file mode 100644 index 000000000000..12b094dc806f --- /dev/null +++ b/drivers/pinctrl/spear/pinctrl-spear1310.c @@ -0,0 +1,2198 @@ +/* + * Driver for the ST Microelectronics SPEAr1310 pinmux + * + * Copyright (C) 2012 ST Microelectronics + * Viresh Kumar + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include +#include +#include +#include +#include +#include "pinctrl-spear.h" + +#define DRIVER_NAME "spear1310-pinmux" + +/* pins */ +static const struct pinctrl_pin_desc spear1310_pins[] = { + SPEAR_PIN_0_TO_101, + SPEAR_PIN_102_TO_245, +}; + +/* registers */ +#define PERIP_CFG 0x32C + #define MCIF_SEL_SHIFT 3 + #define MCIF_SEL_SD (0x1 << MCIF_SEL_SHIFT) + #define MCIF_SEL_CF (0x2 << MCIF_SEL_SHIFT) + #define MCIF_SEL_XD (0x3 << MCIF_SEL_SHIFT) + #define MCIF_SEL_MASK (0x3 << MCIF_SEL_SHIFT) + +#define PCIE_SATA_CFG 0x3A4 + #define PCIE_SATA2_SEL_PCIE (0 << 31) + #define PCIE_SATA1_SEL_PCIE (0 << 30) + #define PCIE_SATA0_SEL_PCIE (0 << 29) + #define PCIE_SATA2_SEL_SATA (1 << 31) + #define PCIE_SATA1_SEL_SATA (1 << 30) + #define PCIE_SATA0_SEL_SATA (1 << 29) + #define SATA2_CFG_TX_CLK_EN (1 << 27) + #define SATA2_CFG_RX_CLK_EN (1 << 26) + #define SATA2_CFG_POWERUP_RESET (1 << 25) + #define SATA2_CFG_PM_CLK_EN (1 << 24) + #define SATA1_CFG_TX_CLK_EN (1 << 23) + #define SATA1_CFG_RX_CLK_EN (1 << 22) + #define SATA1_CFG_POWERUP_RESET (1 << 21) + #define SATA1_CFG_PM_CLK_EN (1 << 20) + #define SATA0_CFG_TX_CLK_EN (1 << 19) + #define SATA0_CFG_RX_CLK_EN (1 << 18) + #define SATA0_CFG_POWERUP_RESET (1 << 17) + #define SATA0_CFG_PM_CLK_EN (1 << 16) + #define PCIE2_CFG_DEVICE_PRESENT (1 << 11) + #define PCIE2_CFG_POWERUP_RESET (1 << 10) + #define PCIE2_CFG_CORE_CLK_EN (1 << 9) + #define PCIE2_CFG_AUX_CLK_EN (1 << 8) + #define PCIE1_CFG_DEVICE_PRESENT (1 << 7) + #define PCIE1_CFG_POWERUP_RESET (1 << 6) + #define PCIE1_CFG_CORE_CLK_EN (1 << 5) + #define PCIE1_CFG_AUX_CLK_EN (1 << 4) + #define PCIE0_CFG_DEVICE_PRESENT (1 << 3) + #define PCIE0_CFG_POWERUP_RESET (1 << 2) + #define PCIE0_CFG_CORE_CLK_EN (1 << 1) + #define PCIE0_CFG_AUX_CLK_EN (1 << 0) + +#define PAD_FUNCTION_EN_0 0x650 + #define PMX_UART0_MASK (1 << 1) + #define PMX_I2C0_MASK (1 << 2) + #define PMX_I2S0_MASK (1 << 3) + #define PMX_SSP0_MASK (1 << 4) + #define PMX_CLCD1_MASK (1 << 5) + #define PMX_EGPIO00_MASK (1 << 6) + #define PMX_EGPIO01_MASK (1 << 7) + #define PMX_EGPIO02_MASK (1 << 8) + #define PMX_EGPIO03_MASK (1 << 9) + #define PMX_EGPIO04_MASK (1 << 10) + #define PMX_EGPIO05_MASK (1 << 11) + #define PMX_EGPIO06_MASK (1 << 12) + #define PMX_EGPIO07_MASK (1 << 13) + #define PMX_EGPIO08_MASK (1 << 14) + #define PMX_EGPIO09_MASK (1 << 15) + #define PMX_SMI_MASK (1 << 16) + #define PMX_NAND8_MASK (1 << 17) + #define PMX_GMIICLK_MASK (1 << 18) + #define PMX_GMIICOL_CRS_XFERER_MIITXCLK_MASK (1 << 19) + #define PMX_RXCLK_RDV_TXEN_D03_MASK (1 << 20) + #define PMX_GMIID47_MASK (1 << 21) + #define PMX_MDC_MDIO_MASK (1 << 22) + #define PMX_MCI_DATA8_15_MASK (1 << 23) + #define PMX_NFAD23_MASK (1 << 24) + #define PMX_NFAD24_MASK (1 << 25) + #define PMX_NFAD25_MASK (1 << 26) + #define PMX_NFCE3_MASK (1 << 27) + #define PMX_NFWPRT3_MASK (1 << 28) + #define PMX_NFRSTPWDWN0_MASK (1 << 29) + #define PMX_NFRSTPWDWN1_MASK (1 << 30) + #define PMX_NFRSTPWDWN2_MASK (1 << 31) + +#define PAD_FUNCTION_EN_1 0x654 + #define PMX_NFRSTPWDWN3_MASK (1 << 0) + #define PMX_SMINCS2_MASK (1 << 1) + #define PMX_SMINCS3_MASK (1 << 2) + #define PMX_CLCD2_MASK (1 << 3) + #define PMX_KBD_ROWCOL68_MASK (1 << 4) + #define PMX_EGPIO10_MASK (1 << 5) + #define PMX_EGPIO11_MASK (1 << 6) + #define PMX_EGPIO12_MASK (1 << 7) + #define PMX_EGPIO13_MASK (1 << 8) + #define PMX_EGPIO14_MASK (1 << 9) + #define PMX_EGPIO15_MASK (1 << 10) + #define PMX_UART0_MODEM_MASK (1 << 11) + #define PMX_GPT0_TMR0_MASK (1 << 12) + #define PMX_GPT0_TMR1_MASK (1 << 13) + #define PMX_GPT1_TMR0_MASK (1 << 14) + #define PMX_GPT1_TMR1_MASK (1 << 15) + #define PMX_I2S1_MASK (1 << 16) + #define PMX_KBD_ROWCOL25_MASK (1 << 17) + #define PMX_NFIO8_15_MASK (1 << 18) + #define PMX_KBD_COL1_MASK (1 << 19) + #define PMX_NFCE1_MASK (1 << 20) + #define PMX_KBD_COL0_MASK (1 << 21) + #define PMX_NFCE2_MASK (1 << 22) + #define PMX_KBD_ROW1_MASK (1 << 23) + #define PMX_NFWPRT1_MASK (1 << 24) + #define PMX_KBD_ROW0_MASK (1 << 25) + #define PMX_NFWPRT2_MASK (1 << 26) + #define PMX_MCIDATA0_MASK (1 << 27) + #define PMX_MCIDATA1_MASK (1 << 28) + #define PMX_MCIDATA2_MASK (1 << 29) + #define PMX_MCIDATA3_MASK (1 << 30) + #define PMX_MCIDATA4_MASK (1 << 31) + +#define PAD_FUNCTION_EN_2 0x658 + #define PMX_MCIDATA5_MASK (1 << 0) + #define PMX_MCIDATA6_MASK (1 << 1) + #define PMX_MCIDATA7_MASK (1 << 2) + #define PMX_MCIDATA1SD_MASK (1 << 3) + #define PMX_MCIDATA2SD_MASK (1 << 4) + #define PMX_MCIDATA3SD_MASK (1 << 5) + #define PMX_MCIADDR0ALE_MASK (1 << 6) + #define PMX_MCIADDR1CLECLK_MASK (1 << 7) + #define PMX_MCIADDR2_MASK (1 << 8) + #define PMX_MCICECF_MASK (1 << 9) + #define PMX_MCICEXD_MASK (1 << 10) + #define PMX_MCICESDMMC_MASK (1 << 11) + #define PMX_MCICDCF1_MASK (1 << 12) + #define PMX_MCICDCF2_MASK (1 << 13) + #define PMX_MCICDXD_MASK (1 << 14) + #define PMX_MCICDSDMMC_MASK (1 << 15) + #define PMX_MCIDATADIR_MASK (1 << 16) + #define PMX_MCIDMARQWP_MASK (1 << 17) + #define PMX_MCIIORDRE_MASK (1 << 18) + #define PMX_MCIIOWRWE_MASK (1 << 19) + #define PMX_MCIRESETCF_MASK (1 << 20) + #define PMX_MCICS0CE_MASK (1 << 21) + #define PMX_MCICFINTR_MASK (1 << 22) + #define PMX_MCIIORDY_MASK (1 << 23) + #define PMX_MCICS1_MASK (1 << 24) + #define PMX_MCIDMAACK_MASK (1 << 25) + #define PMX_MCISDCMD_MASK (1 << 26) + #define PMX_MCILEDS_MASK (1 << 27) + #define PMX_TOUCH_XY_MASK (1 << 28) + #define PMX_SSP0_CS0_MASK (1 << 29) + #define PMX_SSP0_CS1_2_MASK (1 << 30) + +/* combined macros */ +#define PMX_GMII_MASK (PMX_GMIICLK_MASK | \ + PMX_GMIICOL_CRS_XFERER_MIITXCLK_MASK | \ + PMX_RXCLK_RDV_TXEN_D03_MASK | \ + PMX_GMIID47_MASK | PMX_MDC_MDIO_MASK) + +#define PMX_EGPIO_0_GRP_MASK (PMX_EGPIO00_MASK | PMX_EGPIO01_MASK | \ + PMX_EGPIO02_MASK | \ + PMX_EGPIO03_MASK | PMX_EGPIO04_MASK | \ + PMX_EGPIO05_MASK | PMX_EGPIO06_MASK | \ + PMX_EGPIO07_MASK | PMX_EGPIO08_MASK | \ + PMX_EGPIO09_MASK) +#define PMX_EGPIO_1_GRP_MASK (PMX_EGPIO10_MASK | PMX_EGPIO11_MASK | \ + PMX_EGPIO12_MASK | PMX_EGPIO13_MASK | \ + PMX_EGPIO14_MASK | PMX_EGPIO15_MASK) + +#define PMX_KEYBOARD_6X6_MASK (PMX_KBD_ROW0_MASK | PMX_KBD_ROW1_MASK | \ + PMX_KBD_ROWCOL25_MASK | PMX_KBD_COL0_MASK | \ + PMX_KBD_COL1_MASK) + +#define PMX_NAND8BIT_0_MASK (PMX_NAND8_MASK | PMX_NFAD23_MASK | \ + PMX_NFAD24_MASK | PMX_NFAD25_MASK | \ + PMX_NFWPRT3_MASK | PMX_NFRSTPWDWN0_MASK | \ + PMX_NFRSTPWDWN1_MASK | PMX_NFRSTPWDWN2_MASK | \ + PMX_NFCE3_MASK) +#define PMX_NAND8BIT_1_MASK PMX_NFRSTPWDWN3_MASK + +#define PMX_NAND16BIT_1_MASK (PMX_KBD_ROWCOL25_MASK | PMX_NFIO8_15_MASK) +#define PMX_NAND_4CHIPS_MASK (PMX_NFCE1_MASK | PMX_NFCE2_MASK | \ + PMX_NFWPRT1_MASK | PMX_NFWPRT2_MASK | \ + PMX_KBD_ROW0_MASK | PMX_KBD_ROW1_MASK | \ + PMX_KBD_COL0_MASK | PMX_KBD_COL1_MASK) + +#define PMX_MCIFALL_1_MASK 0xF8000000 +#define PMX_MCIFALL_2_MASK 0x0FFFFFFF + +#define PMX_PCI_REG1_MASK (PMX_SMINCS2_MASK | PMX_SMINCS3_MASK | \ + PMX_CLCD2_MASK | PMX_KBD_ROWCOL68_MASK | \ + PMX_EGPIO_1_GRP_MASK | PMX_GPT0_TMR0_MASK | \ + PMX_GPT0_TMR1_MASK | PMX_GPT1_TMR0_MASK | \ + PMX_GPT1_TMR1_MASK | PMX_I2S1_MASK | \ + PMX_NFCE2_MASK) +#define PMX_PCI_REG2_MASK (PMX_TOUCH_XY_MASK | PMX_SSP0_CS0_MASK | \ + PMX_SSP0_CS1_2_MASK) + +#define PMX_SMII_0_1_2_MASK (PMX_CLCD2_MASK | PMX_KBD_ROWCOL68_MASK) +#define PMX_RGMII_REG0_MASK (PMX_MCI_DATA8_15_MASK | \ + PMX_GMIICOL_CRS_XFERER_MIITXCLK_MASK | \ + PMX_GMIID47_MASK) +#define PMX_RGMII_REG1_MASK (PMX_KBD_ROWCOL68_MASK | PMX_EGPIO_1_GRP_MASK |\ + PMX_KBD_ROW1_MASK | PMX_NFWPRT1_MASK | \ + PMX_KBD_ROW0_MASK | PMX_NFWPRT2_MASK) +#define PMX_RGMII_REG2_MASK (PMX_TOUCH_XY_MASK | PMX_SSP0_CS0_MASK | \ + PMX_SSP0_CS1_2_MASK) + +#define PCIE_CFG_VAL(x) (PCIE_SATA##x##_SEL_PCIE | \ + PCIE##x##_CFG_AUX_CLK_EN | \ + PCIE##x##_CFG_CORE_CLK_EN | \ + PCIE##x##_CFG_POWERUP_RESET | \ + PCIE##x##_CFG_DEVICE_PRESENT) +#define SATA_CFG_VAL(x) (PCIE_SATA##x##_SEL_SATA | \ + SATA##x##_CFG_PM_CLK_EN | \ + SATA##x##_CFG_POWERUP_RESET | \ + SATA##x##_CFG_RX_CLK_EN | \ + SATA##x##_CFG_TX_CLK_EN) + +/* Pad multiplexing for i2c0 device */ +static const unsigned i2c0_pins[] = { 102, 103 }; +static struct spear_muxreg i2c0_muxreg[] = { + { + .reg = PAD_FUNCTION_EN_0, + .mask = PMX_I2C0_MASK, + .val = PMX_I2C0_MASK, + }, +}; + +static struct spear_modemux i2c0_modemux[] = { + { + .muxregs = i2c0_muxreg, + .nmuxregs = ARRAY_SIZE(i2c0_muxreg), + }, +}; + +static struct spear_pingroup i2c0_pingroup = { + .name = "i2c0_grp", + .pins = i2c0_pins, + .npins = ARRAY_SIZE(i2c0_pins), + .modemuxs = i2c0_modemux, + .nmodemuxs = ARRAY_SIZE(i2c0_modemux), +}; + +static const char *const i2c0_grps[] = { "i2c0_grp" }; +static struct spear_function i2c0_function = { + .name = "i2c0", + .groups = i2c0_grps, + .ngroups = ARRAY_SIZE(i2c0_grps), +}; + +/* Pad multiplexing for ssp0 device */ +static const unsigned ssp0_pins[] = { 109, 110, 111, 112 }; +static struct spear_muxreg ssp0_muxreg[] = { + { + .reg = PAD_FUNCTION_EN_0, + .mask = PMX_SSP0_MASK, + .val = PMX_SSP0_MASK, + }, +}; + +static struct spear_modemux ssp0_modemux[] = { + { + .muxregs = ssp0_muxreg, + .nmuxregs = ARRAY_SIZE(ssp0_muxreg), + }, +}; + +static struct spear_pingroup ssp0_pingroup = { + .name = "ssp0_grp", + .pins = ssp0_pins, + .npins = ARRAY_SIZE(ssp0_pins), + .modemuxs = ssp0_modemux, + .nmodemuxs = ARRAY_SIZE(ssp0_modemux), +}; + +/* Pad multiplexing for ssp0_cs0 device */ +static const unsigned ssp0_cs0_pins[] = { 96 }; +static struct spear_muxreg ssp0_cs0_muxreg[] = { + { + .reg = PAD_FUNCTION_EN_2, + .mask = PMX_SSP0_CS0_MASK, + .val = PMX_SSP0_CS0_MASK, + }, +}; + +static struct spear_modemux ssp0_cs0_modemux[] = { + { + .muxregs = ssp0_cs0_muxreg, + .nmuxregs = ARRAY_SIZE(ssp0_cs0_muxreg), + }, +}; + +static struct spear_pingroup ssp0_cs0_pingroup = { + .name = "ssp0_cs0_grp", + .pins = ssp0_cs0_pins, + .npins = ARRAY_SIZE(ssp0_cs0_pins), + .modemuxs = ssp0_cs0_modemux, + .nmodemuxs = ARRAY_SIZE(ssp0_cs0_modemux), +}; + +/* ssp0_cs1_2 device */ +static const unsigned ssp0_cs1_2_pins[] = { 94, 95 }; +static struct spear_muxreg ssp0_cs1_2_muxreg[] = { + { + .reg = PAD_FUNCTION_EN_2, + .mask = PMX_SSP0_CS1_2_MASK, + .val = PMX_SSP0_CS1_2_MASK, + }, +}; + +static struct spear_modemux ssp0_cs1_2_modemux[] = { + { + .muxregs = ssp0_cs1_2_muxreg, + .nmuxregs = ARRAY_SIZE(ssp0_cs1_2_muxreg), + }, +}; + +static struct spear_pingroup ssp0_cs1_2_pingroup = { + .name = "ssp0_cs1_2_grp", + .pins = ssp0_cs1_2_pins, + .npins = ARRAY_SIZE(ssp0_cs1_2_pins), + .modemuxs = ssp0_cs1_2_modemux, + .nmodemuxs = ARRAY_SIZE(ssp0_cs1_2_modemux), +}; + +static const char *const ssp0_grps[] = { "ssp0_grp", "ssp0_cs0_grp", + "ssp0_cs1_2_grp" }; +static struct spear_function ssp0_function = { + .name = "ssp0", + .groups = ssp0_grps, + .ngroups = ARRAY_SIZE(ssp0_grps), +}; + +/* Pad multiplexing for i2s0 device */ +static const unsigned i2s0_pins[] = { 104, 105, 106, 107, 108 }; +static struct spear_muxreg i2s0_muxreg[] = { + { + .reg = PAD_FUNCTION_EN_0, + .mask = PMX_I2S0_MASK, + .val = PMX_I2S0_MASK, + }, +}; + +static struct spear_modemux i2s0_modemux[] = { + { + .muxregs = i2s0_muxreg, + .nmuxregs = ARRAY_SIZE(i2s0_muxreg), + }, +}; + +static struct spear_pingroup i2s0_pingroup = { + .name = "i2s0_grp", + .pins = i2s0_pins, + .npins = ARRAY_SIZE(i2s0_pins), + .modemuxs = i2s0_modemux, + .nmodemuxs = ARRAY_SIZE(i2s0_modemux), +}; + +static const char *const i2s0_grps[] = { "i2s0_grp" }; +static struct spear_function i2s0_function = { + .name = "i2s0", + .groups = i2s0_grps, + .ngroups = ARRAY_SIZE(i2s0_grps), +}; + +/* Pad multiplexing for i2s1 device */ +static const unsigned i2s1_pins[] = { 0, 1, 2, 3 }; +static struct spear_muxreg i2s1_muxreg[] = { + { + .reg = PAD_FUNCTION_EN_1, + .mask = PMX_I2S1_MASK, + .val = PMX_I2S1_MASK, + }, +}; + +static struct spear_modemux i2s1_modemux[] = { + { + .muxregs = i2s1_muxreg, + .nmuxregs = ARRAY_SIZE(i2s1_muxreg), + }, +}; + +static struct spear_pingroup i2s1_pingroup = { + .name = "i2s1_grp", + .pins = i2s1_pins, + .npins = ARRAY_SIZE(i2s1_pins), + .modemuxs = i2s1_modemux, + .nmodemuxs = ARRAY_SIZE(i2s1_modemux), +}; + +static const char *const i2s1_grps[] = { "i2s1_grp" }; +static struct spear_function i2s1_function = { + .name = "i2s1", + .groups = i2s1_grps, + .ngroups = ARRAY_SIZE(i2s1_grps), +}; + +/* Pad multiplexing for clcd device */ +static const unsigned clcd_pins[] = { 113, 114, 115, 116, 117, 118, 119, 120, + 121, 122, 123, 124, 125, 126, 127, 128, 129, 130, 131, 132, 133, 134, + 135, 136, 137, 138, 139, 140, 141, 142 }; +static struct spear_muxreg clcd_muxreg[] = { + { + .reg = PAD_FUNCTION_EN_0, + .mask = PMX_CLCD1_MASK, + .val = PMX_CLCD1_MASK, + }, +}; + +static struct spear_modemux clcd_modemux[] = { + { + .muxregs = clcd_muxreg, + .nmuxregs = ARRAY_SIZE(clcd_muxreg), + }, +}; + +static struct spear_pingroup clcd_pingroup = { + .name = "clcd_grp", + .pins = clcd_pins, + .npins = ARRAY_SIZE(clcd_pins), + .modemuxs = clcd_modemux, + .nmodemuxs = ARRAY_SIZE(clcd_modemux), +}; + +static const unsigned clcd_high_res_pins[] = { 30, 31, 32, 33, 34, 35, 36, 37, + 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50, 51, 52 }; +static struct spear_muxreg clcd_high_res_muxreg[] = { + { + .reg = PAD_FUNCTION_EN_1, + .mask = PMX_CLCD2_MASK, + .val = PMX_CLCD2_MASK, + }, +}; + +static struct spear_modemux clcd_high_res_modemux[] = { + { + .muxregs = clcd_high_res_muxreg, + .nmuxregs = ARRAY_SIZE(clcd_high_res_muxreg), + }, +}; + +static struct spear_pingroup clcd_high_res_pingroup = { + .name = "clcd_high_res_grp", + .pins = clcd_high_res_pins, + .npins = ARRAY_SIZE(clcd_high_res_pins), + .modemuxs = clcd_high_res_modemux, + .nmodemuxs = ARRAY_SIZE(clcd_high_res_modemux), +}; + +static const char *const clcd_grps[] = { "clcd_grp", "clcd_high_res" }; +static struct spear_function clcd_function = { + .name = "clcd", + .groups = clcd_grps, + .ngroups = ARRAY_SIZE(clcd_grps), +}; + +static const unsigned arm_gpio_pins[] = { 18, 19, 20, 21, 22, 23, 143, 144, 145, + 146, 147, 148, 149, 150, 151, 152 }; +static struct spear_muxreg arm_gpio_muxreg[] = { + { + .reg = PAD_FUNCTION_EN_0, + .mask = PMX_EGPIO_0_GRP_MASK, + .val = PMX_EGPIO_0_GRP_MASK, + }, { + .reg = PAD_FUNCTION_EN_1, + .mask = PMX_EGPIO_1_GRP_MASK, + .val = PMX_EGPIO_1_GRP_MASK, + }, +}; + +static struct spear_modemux arm_gpio_modemux[] = { + { + .muxregs = arm_gpio_muxreg, + .nmuxregs = ARRAY_SIZE(arm_gpio_muxreg), + }, +}; + +static struct spear_pingroup arm_gpio_pingroup = { + .name = "arm_gpio_grp", + .pins = arm_gpio_pins, + .npins = ARRAY_SIZE(arm_gpio_pins), + .modemuxs = arm_gpio_modemux, + .nmodemuxs = ARRAY_SIZE(arm_gpio_modemux), +}; + +static const char *const arm_gpio_grps[] = { "arm_gpio_grp" }; +static struct spear_function arm_gpio_function = { + .name = "arm_gpio", + .groups = arm_gpio_grps, + .ngroups = ARRAY_SIZE(arm_gpio_grps), +}; + +/* Pad multiplexing for smi 2 chips device */ +static const unsigned smi_2_chips_pins[] = { 153, 154, 155, 156, 157 }; +static struct spear_muxreg smi_2_chips_muxreg[] = { + { + .reg = PAD_FUNCTION_EN_0, + .mask = PMX_SMI_MASK, + .val = PMX_SMI_MASK, + }, +}; + +static struct spear_modemux smi_2_chips_modemux[] = { + { + .muxregs = smi_2_chips_muxreg, + .nmuxregs = ARRAY_SIZE(smi_2_chips_muxreg), + }, +}; + +static struct spear_pingroup smi_2_chips_pingroup = { + .name = "smi_2_chips_grp", + .pins = smi_2_chips_pins, + .npins = ARRAY_SIZE(smi_2_chips_pins), + .modemuxs = smi_2_chips_modemux, + .nmodemuxs = ARRAY_SIZE(smi_2_chips_modemux), +}; + +static const unsigned smi_4_chips_pins[] = { 54, 55 }; +static struct spear_muxreg smi_4_chips_muxreg[] = { + { + .reg = PAD_FUNCTION_EN_0, + .mask = PMX_SMI_MASK, + .val = PMX_SMI_MASK, + }, { + .reg = PAD_FUNCTION_EN_1, + .mask = PMX_SMINCS2_MASK | PMX_SMINCS3_MASK, + .val = PMX_SMINCS2_MASK | PMX_SMINCS3_MASK, + }, +}; + +static struct spear_modemux smi_4_chips_modemux[] = { + { + .muxregs = smi_4_chips_muxreg, + .nmuxregs = ARRAY_SIZE(smi_4_chips_muxreg), + }, +}; + +static struct spear_pingroup smi_4_chips_pingroup = { + .name = "smi_4_chips_grp", + .pins = smi_4_chips_pins, + .npins = ARRAY_SIZE(smi_4_chips_pins), + .modemuxs = smi_4_chips_modemux, + .nmodemuxs = ARRAY_SIZE(smi_4_chips_modemux), +}; + +static const char *const smi_grps[] = { "smi_2_chips_grp", "smi_4_chips_grp" }; +static struct spear_function smi_function = { + .name = "smi", + .groups = smi_grps, + .ngroups = ARRAY_SIZE(smi_grps), +}; + +/* Pad multiplexing for gmii device */ +static const unsigned gmii_pins[] = { 173, 174, 175, 176, 177, 178, 179, 180, + 181, 182, 183, 184, 185, 186, 187, 188, 189, 190, 191, 192, 193, 194, + 195, 196, 197, 198, 199, 200 }; +static struct spear_muxreg gmii_muxreg[] = { + { + .reg = PAD_FUNCTION_EN_0, + .mask = PMX_GMII_MASK, + .val = PMX_GMII_MASK, + }, +}; + +static struct spear_modemux gmii_modemux[] = { + { + .muxregs = gmii_muxreg, + .nmuxregs = ARRAY_SIZE(gmii_muxreg), + }, +}; + +static struct spear_pingroup gmii_pingroup = { + .name = "gmii_grp", + .pins = gmii_pins, + .npins = ARRAY_SIZE(gmii_pins), + .modemuxs = gmii_modemux, + .nmodemuxs = ARRAY_SIZE(gmii_modemux), +}; + +static const char *const gmii_grps[] = { "gmii_grp" }; +static struct spear_function gmii_function = { + .name = "gmii", + .groups = gmii_grps, + .ngroups = ARRAY_SIZE(gmii_grps), +}; + +/* Pad multiplexing for rgmii device */ +static const unsigned rgmii_pins[] = { 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, + 28, 29, 86, 87, 88, 89, 90, 91, 92, 93, 94, 95, 96, 97, 98, 99, 175, + 180, 181, 182, 183, 185, 188, 193, 194, 195, 196, 197, 198, 211, 212 }; +static struct spear_muxreg rgmii_muxreg[] = { + { + .reg = PAD_FUNCTION_EN_0, + .mask = PMX_RGMII_REG0_MASK, + .val = 0, + }, { + .reg = PAD_FUNCTION_EN_1, + .mask = PMX_RGMII_REG1_MASK, + .val = 0, + }, { + .reg = PAD_FUNCTION_EN_2, + .mask = PMX_RGMII_REG2_MASK, + .val = 0, + }, +}; + +static struct spear_modemux rgmii_modemux[] = { + { + .muxregs = rgmii_muxreg, + .nmuxregs = ARRAY_SIZE(rgmii_muxreg), + }, +}; + +static struct spear_pingroup rgmii_pingroup = { + .name = "rgmii_grp", + .pins = rgmii_pins, + .npins = ARRAY_SIZE(rgmii_pins), + .modemuxs = rgmii_modemux, + .nmodemuxs = ARRAY_SIZE(rgmii_modemux), +}; + +static const char *const rgmii_grps[] = { "rgmii_grp" }; +static struct spear_function rgmii_function = { + .name = "rgmii", + .groups = rgmii_grps, + .ngroups = ARRAY_SIZE(rgmii_grps), +}; + +/* Pad multiplexing for smii_0_1_2 device */ +static const unsigned smii_0_1_2_pins[] = { 24, 25, 26, 27, 28, 29, 30, 31, 32, + 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50, + 51, 52, 53, 54, 55 }; +static struct spear_muxreg smii_0_1_2_muxreg[] = { + { + .reg = PAD_FUNCTION_EN_1, + .mask = PMX_SMII_0_1_2_MASK, + .val = 0, + }, +}; + +static struct spear_modemux smii_0_1_2_modemux[] = { + { + .muxregs = smii_0_1_2_muxreg, + .nmuxregs = ARRAY_SIZE(smii_0_1_2_muxreg), + }, +}; + +static struct spear_pingroup smii_0_1_2_pingroup = { + .name = "smii_0_1_2_grp", + .pins = smii_0_1_2_pins, + .npins = ARRAY_SIZE(smii_0_1_2_pins), + .modemuxs = smii_0_1_2_modemux, + .nmodemuxs = ARRAY_SIZE(smii_0_1_2_modemux), +}; + +static const char *const smii_0_1_2_grps[] = { "smii_0_1_2_grp" }; +static struct spear_function smii_0_1_2_function = { + .name = "smii_0_1_2", + .groups = smii_0_1_2_grps, + .ngroups = ARRAY_SIZE(smii_0_1_2_grps), +}; + +/* Pad multiplexing for ras_mii_txclk device */ +static const unsigned ras_mii_txclk_pins[] = { 98, 99 }; +static struct spear_muxreg ras_mii_txclk_muxreg[] = { + { + .reg = PAD_FUNCTION_EN_1, + .mask = PMX_NFCE2_MASK, + .val = 0, + }, +}; + +static struct spear_modemux ras_mii_txclk_modemux[] = { + { + .muxregs = ras_mii_txclk_muxreg, + .nmuxregs = ARRAY_SIZE(ras_mii_txclk_muxreg), + }, +}; + +static struct spear_pingroup ras_mii_txclk_pingroup = { + .name = "ras_mii_txclk_grp", + .pins = ras_mii_txclk_pins, + .npins = ARRAY_SIZE(ras_mii_txclk_pins), + .modemuxs = ras_mii_txclk_modemux, + .nmodemuxs = ARRAY_SIZE(ras_mii_txclk_modemux), +}; + +static const char *const ras_mii_txclk_grps[] = { "ras_mii_txclk_grp" }; +static struct spear_function ras_mii_txclk_function = { + .name = "ras_mii_txclk", + .groups = ras_mii_txclk_grps, + .ngroups = ARRAY_SIZE(ras_mii_txclk_grps), +}; + +/* Pad multiplexing for nand 8bit device (cs0 only) */ +static const unsigned nand_8bit_pins[] = { 56, 57, 58, 59, 60, 61, 62, 63, 64, + 65, 66, 67, 68, 69, 70, 71, 72, 73, 74, 75, 76, 77, 78, 79, 80, 81, 82, + 83, 84, 85, 158, 159, 160, 161, 162, 163, 164, 165, 166, 167, 168, 169, + 170, 171, 172, 201, 202, 203, 204, 205, 206, 207, 208, 209, 210, 211, + 212 }; +static struct spear_muxreg nand_8bit_muxreg[] = { + { + .reg = PAD_FUNCTION_EN_0, + .mask = PMX_NAND8BIT_0_MASK, + .val = PMX_NAND8BIT_0_MASK, + }, { + .reg = PAD_FUNCTION_EN_1, + .mask = PMX_NAND8BIT_1_MASK, + .val = PMX_NAND8BIT_1_MASK, + }, +}; + +static struct spear_modemux nand_8bit_modemux[] = { + { + .muxregs = nand_8bit_muxreg, + .nmuxregs = ARRAY_SIZE(nand_8bit_muxreg), + }, +}; + +static struct spear_pingroup nand_8bit_pingroup = { + .name = "nand_8bit_grp", + .pins = nand_8bit_pins, + .npins = ARRAY_SIZE(nand_8bit_pins), + .modemuxs = nand_8bit_modemux, + .nmodemuxs = ARRAY_SIZE(nand_8bit_modemux), +}; + +/* Pad multiplexing for nand 16bit device */ +static const unsigned nand_16bit_pins[] = { 201, 202, 203, 204, 207, 208, 209, + 210 }; +static struct spear_muxreg nand_16bit_muxreg[] = { + { + .reg = PAD_FUNCTION_EN_1, + .mask = PMX_NAND16BIT_1_MASK, + .val = PMX_NAND16BIT_1_MASK, + }, +}; + +static struct spear_modemux nand_16bit_modemux[] = { + { + .muxregs = nand_16bit_muxreg, + .nmuxregs = ARRAY_SIZE(nand_16bit_muxreg), + }, +}; + +static struct spear_pingroup nand_16bit_pingroup = { + .name = "nand_16bit_grp", + .pins = nand_16bit_pins, + .npins = ARRAY_SIZE(nand_16bit_pins), + .modemuxs = nand_16bit_modemux, + .nmodemuxs = ARRAY_SIZE(nand_16bit_modemux), +}; + +/* Pad multiplexing for nand 4 chips */ +static const unsigned nand_4_chips_pins[] = { 205, 206, 211, 212 }; +static struct spear_muxreg nand_4_chips_muxreg[] = { + { + .reg = PAD_FUNCTION_EN_1, + .mask = PMX_NAND_4CHIPS_MASK, + .val = PMX_NAND_4CHIPS_MASK, + }, +}; + +static struct spear_modemux nand_4_chips_modemux[] = { + { + .muxregs = nand_4_chips_muxreg, + .nmuxregs = ARRAY_SIZE(nand_4_chips_muxreg), + }, +}; + +static struct spear_pingroup nand_4_chips_pingroup = { + .name = "nand_4_chips_grp", + .pins = nand_4_chips_pins, + .npins = ARRAY_SIZE(nand_4_chips_pins), + .modemuxs = nand_4_chips_modemux, + .nmodemuxs = ARRAY_SIZE(nand_4_chips_modemux), +}; + +static const char *const nand_grps[] = { "nand_8bit_grp", "nand_16bit_grp", + "nand_4_chips_grp" }; +static struct spear_function nand_function = { + .name = "nand", + .groups = nand_grps, + .ngroups = ARRAY_SIZE(nand_grps), +}; + +/* Pad multiplexing for keyboard_6x6 device */ +static const unsigned keyboard_6x6_pins[] = { 201, 202, 203, 204, 205, 206, 207, + 208, 209, 210, 211, 212 }; +static struct spear_muxreg keyboard_6x6_muxreg[] = { + { + .reg = PAD_FUNCTION_EN_1, + .mask = PMX_KEYBOARD_6X6_MASK | PMX_NFIO8_15_MASK | + PMX_NFCE1_MASK | PMX_NFCE2_MASK | PMX_NFWPRT1_MASK | + PMX_NFWPRT2_MASK, + .val = PMX_KEYBOARD_6X6_MASK, + }, +}; + +static struct spear_modemux keyboard_6x6_modemux[] = { + { + .muxregs = keyboard_6x6_muxreg, + .nmuxregs = ARRAY_SIZE(keyboard_6x6_muxreg), + }, +}; + +static struct spear_pingroup keyboard_6x6_pingroup = { + .name = "keyboard_6x6_grp", + .pins = keyboard_6x6_pins, + .npins = ARRAY_SIZE(keyboard_6x6_pins), + .modemuxs = keyboard_6x6_modemux, + .nmodemuxs = ARRAY_SIZE(keyboard_6x6_modemux), +}; + +/* Pad multiplexing for keyboard_rowcol6_8 device */ +static const unsigned keyboard_rowcol6_8_pins[] = { 24, 25, 26, 27, 28, 29 }; +static struct spear_muxreg keyboard_rowcol6_8_muxreg[] = { + { + .reg = PAD_FUNCTION_EN_1, + .mask = PMX_KBD_ROWCOL68_MASK, + .val = PMX_KBD_ROWCOL68_MASK, + }, +}; + +static struct spear_modemux keyboard_rowcol6_8_modemux[] = { + { + .muxregs = keyboard_rowcol6_8_muxreg, + .nmuxregs = ARRAY_SIZE(keyboard_rowcol6_8_muxreg), + }, +}; + +static struct spear_pingroup keyboard_rowcol6_8_pingroup = { + .name = "keyboard_rowcol6_8_grp", + .pins = keyboard_rowcol6_8_pins, + .npins = ARRAY_SIZE(keyboard_rowcol6_8_pins), + .modemuxs = keyboard_rowcol6_8_modemux, + .nmodemuxs = ARRAY_SIZE(keyboard_rowcol6_8_modemux), +}; + +static const char *const keyboard_grps[] = { "keyboard_6x6_grp", + "keyboard_rowcol6_8_grp" }; +static struct spear_function keyboard_function = { + .name = "keyboard", + .groups = keyboard_grps, + .ngroups = ARRAY_SIZE(keyboard_grps), +}; + +/* Pad multiplexing for uart0 device */ +static const unsigned uart0_pins[] = { 100, 101 }; +static struct spear_muxreg uart0_muxreg[] = { + { + .reg = PAD_FUNCTION_EN_0, + .mask = PMX_UART0_MASK, + .val = PMX_UART0_MASK, + }, +}; + +static struct spear_modemux uart0_modemux[] = { + { + .muxregs = uart0_muxreg, + .nmuxregs = ARRAY_SIZE(uart0_muxreg), + }, +}; + +static struct spear_pingroup uart0_pingroup = { + .name = "uart0_grp", + .pins = uart0_pins, + .npins = ARRAY_SIZE(uart0_pins), + .modemuxs = uart0_modemux, + .nmodemuxs = ARRAY_SIZE(uart0_modemux), +}; + +/* Pad multiplexing for uart0_modem device */ +static const unsigned uart0_modem_pins[] = { 12, 13, 14, 15, 16, 17 }; +static struct spear_muxreg uart0_modem_muxreg[] = { + { + .reg = PAD_FUNCTION_EN_1, + .mask = PMX_UART0_MODEM_MASK, + .val = PMX_UART0_MODEM_MASK, + }, +}; + +static struct spear_modemux uart0_modem_modemux[] = { + { + .muxregs = uart0_modem_muxreg, + .nmuxregs = ARRAY_SIZE(uart0_modem_muxreg), + }, +}; + +static struct spear_pingroup uart0_modem_pingroup = { + .name = "uart0_modem_grp", + .pins = uart0_modem_pins, + .npins = ARRAY_SIZE(uart0_modem_pins), + .modemuxs = uart0_modem_modemux, + .nmodemuxs = ARRAY_SIZE(uart0_modem_modemux), +}; + +static const char *const uart0_grps[] = { "uart0_grp", "uart0_modem_grp" }; +static struct spear_function uart0_function = { + .name = "uart0", + .groups = uart0_grps, + .ngroups = ARRAY_SIZE(uart0_grps), +}; + +/* Pad multiplexing for gpt0_tmr0 device */ +static const unsigned gpt0_tmr0_pins[] = { 10, 11 }; +static struct spear_muxreg gpt0_tmr0_muxreg[] = { + { + .reg = PAD_FUNCTION_EN_1, + .mask = PMX_GPT0_TMR0_MASK, + .val = PMX_GPT0_TMR0_MASK, + }, +}; + +static struct spear_modemux gpt0_tmr0_modemux[] = { + { + .muxregs = gpt0_tmr0_muxreg, + .nmuxregs = ARRAY_SIZE(gpt0_tmr0_muxreg), + }, +}; + +static struct spear_pingroup gpt0_tmr0_pingroup = { + .name = "gpt0_tmr0_grp", + .pins = gpt0_tmr0_pins, + .npins = ARRAY_SIZE(gpt0_tmr0_pins), + .modemuxs = gpt0_tmr0_modemux, + .nmodemuxs = ARRAY_SIZE(gpt0_tmr0_modemux), +}; + +/* Pad multiplexing for gpt0_tmr1 device */ +static const unsigned gpt0_tmr1_pins[] = { 8, 9 }; +static struct spear_muxreg gpt0_tmr1_muxreg[] = { + { + .reg = PAD_FUNCTION_EN_1, + .mask = PMX_GPT0_TMR1_MASK, + .val = PMX_GPT0_TMR1_MASK, + }, +}; + +static struct spear_modemux gpt0_tmr1_modemux[] = { + { + .muxregs = gpt0_tmr1_muxreg, + .nmuxregs = ARRAY_SIZE(gpt0_tmr1_muxreg), + }, +}; + +static struct spear_pingroup gpt0_tmr1_pingroup = { + .name = "gpt0_tmr1_grp", + .pins = gpt0_tmr1_pins, + .npins = ARRAY_SIZE(gpt0_tmr1_pins), + .modemuxs = gpt0_tmr1_modemux, + .nmodemuxs = ARRAY_SIZE(gpt0_tmr1_modemux), +}; + +static const char *const gpt0_grps[] = { "gpt0_tmr0_grp", "gpt0_tmr1_grp" }; +static struct spear_function gpt0_function = { + .name = "gpt0", + .groups = gpt0_grps, + .ngroups = ARRAY_SIZE(gpt0_grps), +}; + +/* Pad multiplexing for gpt1_tmr0 device */ +static const unsigned gpt1_tmr0_pins[] = { 6, 7 }; +static struct spear_muxreg gpt1_tmr0_muxreg[] = { + { + .reg = PAD_FUNCTION_EN_1, + .mask = PMX_GPT1_TMR0_MASK, + .val = PMX_GPT1_TMR0_MASK, + }, +}; + +static struct spear_modemux gpt1_tmr0_modemux[] = { + { + .muxregs = gpt1_tmr0_muxreg, + .nmuxregs = ARRAY_SIZE(gpt1_tmr0_muxreg), + }, +}; + +static struct spear_pingroup gpt1_tmr0_pingroup = { + .name = "gpt1_tmr0_grp", + .pins = gpt1_tmr0_pins, + .npins = ARRAY_SIZE(gpt1_tmr0_pins), + .modemuxs = gpt1_tmr0_modemux, + .nmodemuxs = ARRAY_SIZE(gpt1_tmr0_modemux), +}; + +/* Pad multiplexing for gpt1_tmr1 device */ +static const unsigned gpt1_tmr1_pins[] = { 4, 5 }; +static struct spear_muxreg gpt1_tmr1_muxreg[] = { + { + .reg = PAD_FUNCTION_EN_1, + .mask = PMX_GPT1_TMR1_MASK, + .val = PMX_GPT1_TMR1_MASK, + }, +}; + +static struct spear_modemux gpt1_tmr1_modemux[] = { + { + .muxregs = gpt1_tmr1_muxreg, + .nmuxregs = ARRAY_SIZE(gpt1_tmr1_muxreg), + }, +}; + +static struct spear_pingroup gpt1_tmr1_pingroup = { + .name = "gpt1_tmr1_grp", + .pins = gpt1_tmr1_pins, + .npins = ARRAY_SIZE(gpt1_tmr1_pins), + .modemuxs = gpt1_tmr1_modemux, + .nmodemuxs = ARRAY_SIZE(gpt1_tmr1_modemux), +}; + +static const char *const gpt1_grps[] = { "gpt1_tmr1_grp", "gpt1_tmr0_grp" }; +static struct spear_function gpt1_function = { + .name = "gpt1", + .groups = gpt1_grps, + .ngroups = ARRAY_SIZE(gpt1_grps), +}; + +/* Pad multiplexing for mcif device */ +static const unsigned mcif_pins[] = { 86, 87, 88, 89, 90, 91, 92, 93, 213, 214, + 215, 216, 217, 218, 219, 220, 221, 222, 223, 224, 225, 226, 227, 228, + 229, 230, 231, 232, 233, 234, 235, 236, 237, 238, 239, 240, 241, 242, + 243, 244, 245 }; +#define MCIF_MUXREG \ + { \ + .reg = PAD_FUNCTION_EN_0, \ + .mask = PMX_MCI_DATA8_15_MASK, \ + .val = PMX_MCI_DATA8_15_MASK, \ + }, { \ + .reg = PAD_FUNCTION_EN_1, \ + .mask = PMX_MCIFALL_1_MASK | PMX_NFWPRT1_MASK | \ + PMX_NFWPRT2_MASK, \ + .val = PMX_MCIFALL_1_MASK, \ + }, { \ + .reg = PAD_FUNCTION_EN_2, \ + .mask = PMX_MCIFALL_2_MASK, \ + .val = PMX_MCIFALL_2_MASK, \ + } + +/* sdhci device */ +static struct spear_muxreg sdhci_muxreg[] = { + MCIF_MUXREG, + { + .reg = PERIP_CFG, + .mask = MCIF_SEL_MASK, + .val = MCIF_SEL_SD, + }, +}; + +static struct spear_modemux sdhci_modemux[] = { + { + .muxregs = sdhci_muxreg, + .nmuxregs = ARRAY_SIZE(sdhci_muxreg), + }, +}; + +static struct spear_pingroup sdhci_pingroup = { + .name = "sdhci_grp", + .pins = mcif_pins, + .npins = ARRAY_SIZE(mcif_pins), + .modemuxs = sdhci_modemux, + .nmodemuxs = ARRAY_SIZE(sdhci_modemux), +}; + +static const char *const sdhci_grps[] = { "sdhci_grp" }; +static struct spear_function sdhci_function = { + .name = "sdhci", + .groups = sdhci_grps, + .ngroups = ARRAY_SIZE(sdhci_grps), +}; + +/* cf device */ +static struct spear_muxreg cf_muxreg[] = { + MCIF_MUXREG, + { + .reg = PERIP_CFG, + .mask = MCIF_SEL_MASK, + .val = MCIF_SEL_CF, + }, +}; + +static struct spear_modemux cf_modemux[] = { + { + .muxregs = cf_muxreg, + .nmuxregs = ARRAY_SIZE(cf_muxreg), + }, +}; + +static struct spear_pingroup cf_pingroup = { + .name = "cf_grp", + .pins = mcif_pins, + .npins = ARRAY_SIZE(mcif_pins), + .modemuxs = cf_modemux, + .nmodemuxs = ARRAY_SIZE(cf_modemux), +}; + +static const char *const cf_grps[] = { "cf_grp" }; +static struct spear_function cf_function = { + .name = "cf", + .groups = cf_grps, + .ngroups = ARRAY_SIZE(cf_grps), +}; + +/* xd device */ +static struct spear_muxreg xd_muxreg[] = { + MCIF_MUXREG, + { + .reg = PERIP_CFG, + .mask = MCIF_SEL_MASK, + .val = MCIF_SEL_XD, + }, +}; + +static struct spear_modemux xd_modemux[] = { + { + .muxregs = xd_muxreg, + .nmuxregs = ARRAY_SIZE(xd_muxreg), + }, +}; + +static struct spear_pingroup xd_pingroup = { + .name = "xd_grp", + .pins = mcif_pins, + .npins = ARRAY_SIZE(mcif_pins), + .modemuxs = xd_modemux, + .nmodemuxs = ARRAY_SIZE(xd_modemux), +}; + +static const char *const xd_grps[] = { "xd_grp" }; +static struct spear_function xd_function = { + .name = "xd", + .groups = xd_grps, + .ngroups = ARRAY_SIZE(xd_grps), +}; + +/* Pad multiplexing for touch_xy device */ +static const unsigned touch_xy_pins[] = { 97 }; +static struct spear_muxreg touch_xy_muxreg[] = { + { + .reg = PAD_FUNCTION_EN_2, + .mask = PMX_TOUCH_XY_MASK, + .val = PMX_TOUCH_XY_MASK, + }, +}; + +static struct spear_modemux touch_xy_modemux[] = { + { + .muxregs = touch_xy_muxreg, + .nmuxregs = ARRAY_SIZE(touch_xy_muxreg), + }, +}; + +static struct spear_pingroup touch_xy_pingroup = { + .name = "touch_xy_grp", + .pins = touch_xy_pins, + .npins = ARRAY_SIZE(touch_xy_pins), + .modemuxs = touch_xy_modemux, + .nmodemuxs = ARRAY_SIZE(touch_xy_modemux), +}; + +static const char *const touch_xy_grps[] = { "touch_xy_grp" }; +static struct spear_function touch_xy_function = { + .name = "touchscreen", + .groups = touch_xy_grps, + .ngroups = ARRAY_SIZE(touch_xy_grps), +}; + +/* Pad multiplexing for uart1 device */ +/* Muxed with I2C */ +static const unsigned uart1_dis_i2c_pins[] = { 102, 103 }; +static struct spear_muxreg uart1_dis_i2c_muxreg[] = { + { + .reg = PAD_FUNCTION_EN_0, + .mask = PMX_I2C0_MASK, + .val = 0, + }, +}; + +static struct spear_modemux uart1_dis_i2c_modemux[] = { + { + .muxregs = uart1_dis_i2c_muxreg, + .nmuxregs = ARRAY_SIZE(uart1_dis_i2c_muxreg), + }, +}; + +static struct spear_pingroup uart_1_dis_i2c_pingroup = { + .name = "uart1_disable_i2c_grp", + .pins = uart1_dis_i2c_pins, + .npins = ARRAY_SIZE(uart1_dis_i2c_pins), + .modemuxs = uart1_dis_i2c_modemux, + .nmodemuxs = ARRAY_SIZE(uart1_dis_i2c_modemux), +}; + +/* Muxed with SD/MMC */ +static const unsigned uart1_dis_sd_pins[] = { 214, 215 }; +static struct spear_muxreg uart1_dis_sd_muxreg[] = { + { + .reg = PAD_FUNCTION_EN_1, + .mask = PMX_MCIDATA1_MASK | + PMX_MCIDATA2_MASK, + .val = 0, + }, +}; + +static struct spear_modemux uart1_dis_sd_modemux[] = { + { + .muxregs = uart1_dis_sd_muxreg, + .nmuxregs = ARRAY_SIZE(uart1_dis_sd_muxreg), + }, +}; + +static struct spear_pingroup uart_1_dis_sd_pingroup = { + .name = "uart1_disable_sd_grp", + .pins = uart1_dis_sd_pins, + .npins = ARRAY_SIZE(uart1_dis_sd_pins), + .modemuxs = uart1_dis_sd_modemux, + .nmodemuxs = ARRAY_SIZE(uart1_dis_sd_modemux), +}; + +static const char *const uart1_grps[] = { "uart1_disable_i2c_grp", + "uart1_disable_sd_grp" }; +static struct spear_function uart1_function = { + .name = "uart1", + .groups = uart1_grps, + .ngroups = ARRAY_SIZE(uart1_grps), +}; + +/* Pad multiplexing for uart2_3 device */ +static const unsigned uart2_3_pins[] = { 104, 105, 106, 107 }; +static struct spear_muxreg uart2_3_muxreg[] = { + { + .reg = PAD_FUNCTION_EN_0, + .mask = PMX_I2S0_MASK, + .val = 0, + }, +}; + +static struct spear_modemux uart2_3_modemux[] = { + { + .muxregs = uart2_3_muxreg, + .nmuxregs = ARRAY_SIZE(uart2_3_muxreg), + }, +}; + +static struct spear_pingroup uart_2_3_pingroup = { + .name = "uart2_3_grp", + .pins = uart2_3_pins, + .npins = ARRAY_SIZE(uart2_3_pins), + .modemuxs = uart2_3_modemux, + .nmodemuxs = ARRAY_SIZE(uart2_3_modemux), +}; + +static const char *const uart2_3_grps[] = { "uart2_3_grp" }; +static struct spear_function uart2_3_function = { + .name = "uart2_3", + .groups = uart2_3_grps, + .ngroups = ARRAY_SIZE(uart2_3_grps), +}; + +/* Pad multiplexing for uart4 device */ +static const unsigned uart4_pins[] = { 108, 113 }; +static struct spear_muxreg uart4_muxreg[] = { + { + .reg = PAD_FUNCTION_EN_0, + .mask = PMX_I2S0_MASK | PMX_CLCD1_MASK, + .val = 0, + }, +}; + +static struct spear_modemux uart4_modemux[] = { + { + .muxregs = uart4_muxreg, + .nmuxregs = ARRAY_SIZE(uart4_muxreg), + }, +}; + +static struct spear_pingroup uart_4_pingroup = { + .name = "uart4_grp", + .pins = uart4_pins, + .npins = ARRAY_SIZE(uart4_pins), + .modemuxs = uart4_modemux, + .nmodemuxs = ARRAY_SIZE(uart4_modemux), +}; + +static const char *const uart4_grps[] = { "uart4_grp" }; +static struct spear_function uart4_function = { + .name = "uart4", + .groups = uart4_grps, + .ngroups = ARRAY_SIZE(uart4_grps), +}; + +/* Pad multiplexing for uart5 device */ +static const unsigned uart5_pins[] = { 114, 115 }; +static struct spear_muxreg uart5_muxreg[] = { + { + .reg = PAD_FUNCTION_EN_0, + .mask = PMX_CLCD1_MASK, + .val = 0, + }, +}; + +static struct spear_modemux uart5_modemux[] = { + { + .muxregs = uart5_muxreg, + .nmuxregs = ARRAY_SIZE(uart5_muxreg), + }, +}; + +static struct spear_pingroup uart_5_pingroup = { + .name = "uart5_grp", + .pins = uart5_pins, + .npins = ARRAY_SIZE(uart5_pins), + .modemuxs = uart5_modemux, + .nmodemuxs = ARRAY_SIZE(uart5_modemux), +}; + +static const char *const uart5_grps[] = { "uart5_grp" }; +static struct spear_function uart5_function = { + .name = "uart5", + .groups = uart5_grps, + .ngroups = ARRAY_SIZE(uart5_grps), +}; + +/* Pad multiplexing for rs485_0_1_tdm_0_1 device */ +static const unsigned rs485_0_1_tdm_0_1_pins[] = { 116, 117, 118, 119, 120, 121, + 122, 123, 124, 125, 126, 127, 128, 129, 130, 131, 132, 133, 134, 135, + 136, 137 }; +static struct spear_muxreg rs485_0_1_tdm_0_1_muxreg[] = { + { + .reg = PAD_FUNCTION_EN_0, + .mask = PMX_CLCD1_MASK, + .val = 0, + }, +}; + +static struct spear_modemux rs485_0_1_tdm_0_1_modemux[] = { + { + .muxregs = rs485_0_1_tdm_0_1_muxreg, + .nmuxregs = ARRAY_SIZE(rs485_0_1_tdm_0_1_muxreg), + }, +}; + +static struct spear_pingroup rs485_0_1_tdm_0_1_pingroup = { + .name = "rs485_0_1_tdm_0_1_grp", + .pins = rs485_0_1_tdm_0_1_pins, + .npins = ARRAY_SIZE(rs485_0_1_tdm_0_1_pins), + .modemuxs = rs485_0_1_tdm_0_1_modemux, + .nmodemuxs = ARRAY_SIZE(rs485_0_1_tdm_0_1_modemux), +}; + +static const char *const rs485_0_1_tdm_0_1_grps[] = { "rs485_0_1_tdm_0_1_grp" }; +static struct spear_function rs485_0_1_tdm_0_1_function = { + .name = "rs485_0_1_tdm_0_1", + .groups = rs485_0_1_tdm_0_1_grps, + .ngroups = ARRAY_SIZE(rs485_0_1_tdm_0_1_grps), +}; + +/* Pad multiplexing for i2c_1_2 device */ +static const unsigned i2c_1_2_pins[] = { 138, 139, 140, 141 }; +static struct spear_muxreg i2c_1_2_muxreg[] = { + { + .reg = PAD_FUNCTION_EN_0, + .mask = PMX_CLCD1_MASK, + .val = 0, + }, +}; + +static struct spear_modemux i2c_1_2_modemux[] = { + { + .muxregs = i2c_1_2_muxreg, + .nmuxregs = ARRAY_SIZE(i2c_1_2_muxreg), + }, +}; + +static struct spear_pingroup i2c_1_2_pingroup = { + .name = "i2c_1_2_grp", + .pins = i2c_1_2_pins, + .npins = ARRAY_SIZE(i2c_1_2_pins), + .modemuxs = i2c_1_2_modemux, + .nmodemuxs = ARRAY_SIZE(i2c_1_2_modemux), +}; + +static const char *const i2c_1_2_grps[] = { "i2c_1_2_grp" }; +static struct spear_function i2c_1_2_function = { + .name = "i2c_1_2", + .groups = i2c_1_2_grps, + .ngroups = ARRAY_SIZE(i2c_1_2_grps), +}; + +/* Pad multiplexing for i2c3_dis_smi_clcd device */ +/* Muxed with SMI & CLCD */ +static const unsigned i2c3_dis_smi_clcd_pins[] = { 142, 153 }; +static struct spear_muxreg i2c3_dis_smi_clcd_muxreg[] = { + { + .reg = PAD_FUNCTION_EN_0, + .mask = PMX_CLCD1_MASK | PMX_SMI_MASK, + .val = 0, + }, +}; + +static struct spear_modemux i2c3_dis_smi_clcd_modemux[] = { + { + .muxregs = i2c3_dis_smi_clcd_muxreg, + .nmuxregs = ARRAY_SIZE(i2c3_dis_smi_clcd_muxreg), + }, +}; + +static struct spear_pingroup i2c3_dis_smi_clcd_pingroup = { + .name = "i2c3_dis_smi_clcd_grp", + .pins = i2c3_dis_smi_clcd_pins, + .npins = ARRAY_SIZE(i2c3_dis_smi_clcd_pins), + .modemuxs = i2c3_dis_smi_clcd_modemux, + .nmodemuxs = ARRAY_SIZE(i2c3_dis_smi_clcd_modemux), +}; + +/* Pad multiplexing for i2c3_dis_sd_i2s0 device */ +/* Muxed with SD/MMC & I2S1 */ +static const unsigned i2c3_dis_sd_i2s0_pins[] = { 0, 216 }; +static struct spear_muxreg i2c3_dis_sd_i2s0_muxreg[] = { + { + .reg = PAD_FUNCTION_EN_1, + .mask = PMX_I2S1_MASK | PMX_MCIDATA3_MASK, + .val = 0, + }, +}; + +static struct spear_modemux i2c3_dis_sd_i2s0_modemux[] = { + { + .muxregs = i2c3_dis_sd_i2s0_muxreg, + .nmuxregs = ARRAY_SIZE(i2c3_dis_sd_i2s0_muxreg), + }, +}; + +static struct spear_pingroup i2c3_dis_sd_i2s0_pingroup = { + .name = "i2c3_dis_sd_i2s0_grp", + .pins = i2c3_dis_sd_i2s0_pins, + .npins = ARRAY_SIZE(i2c3_dis_sd_i2s0_pins), + .modemuxs = i2c3_dis_sd_i2s0_modemux, + .nmodemuxs = ARRAY_SIZE(i2c3_dis_sd_i2s0_modemux), +}; + +static const char *const i2c3_grps[] = { "i2c3_dis_smi_clcd_grp", + "i2c3_dis_sd_i2s0_grp" }; +static struct spear_function i2c3_unction = { + .name = "i2c3_i2s1", + .groups = i2c3_grps, + .ngroups = ARRAY_SIZE(i2c3_grps), +}; + +/* Pad multiplexing for i2c_4_5_dis_smi device */ +/* Muxed with SMI */ +static const unsigned i2c_4_5_dis_smi_pins[] = { 154, 155, 156, 157 }; +static struct spear_muxreg i2c_4_5_dis_smi_muxreg[] = { + { + .reg = PAD_FUNCTION_EN_0, + .mask = PMX_SMI_MASK, + .val = 0, + }, +}; + +static struct spear_modemux i2c_4_5_dis_smi_modemux[] = { + { + .muxregs = i2c_4_5_dis_smi_muxreg, + .nmuxregs = ARRAY_SIZE(i2c_4_5_dis_smi_muxreg), + }, +}; + +static struct spear_pingroup i2c_4_5_dis_smi_pingroup = { + .name = "i2c_4_5_dis_smi_grp", + .pins = i2c_4_5_dis_smi_pins, + .npins = ARRAY_SIZE(i2c_4_5_dis_smi_pins), + .modemuxs = i2c_4_5_dis_smi_modemux, + .nmodemuxs = ARRAY_SIZE(i2c_4_5_dis_smi_modemux), +}; + +/* Pad multiplexing for i2c4_dis_sd device */ +/* Muxed with SD/MMC */ +static const unsigned i2c4_dis_sd_pins[] = { 217, 218 }; +static struct spear_muxreg i2c4_dis_sd_muxreg[] = { + { + .reg = PAD_FUNCTION_EN_1, + .mask = PMX_MCIDATA4_MASK, + .val = 0, + }, { + .reg = PAD_FUNCTION_EN_2, + .mask = PMX_MCIDATA5_MASK, + .val = 0, + }, +}; + +static struct spear_modemux i2c4_dis_sd_modemux[] = { + { + .muxregs = i2c4_dis_sd_muxreg, + .nmuxregs = ARRAY_SIZE(i2c4_dis_sd_muxreg), + }, +}; + +static struct spear_pingroup i2c4_dis_sd_pingroup = { + .name = "i2c4_dis_sd_grp", + .pins = i2c4_dis_sd_pins, + .npins = ARRAY_SIZE(i2c4_dis_sd_pins), + .modemuxs = i2c4_dis_sd_modemux, + .nmodemuxs = ARRAY_SIZE(i2c4_dis_sd_modemux), +}; + +/* Pad multiplexing for i2c5_dis_sd device */ +/* Muxed with SD/MMC */ +static const unsigned i2c5_dis_sd_pins[] = { 219, 220 }; +static struct spear_muxreg i2c5_dis_sd_muxreg[] = { + { + .reg = PAD_FUNCTION_EN_2, + .mask = PMX_MCIDATA6_MASK | + PMX_MCIDATA7_MASK, + .val = 0, + }, +}; + +static struct spear_modemux i2c5_dis_sd_modemux[] = { + { + .muxregs = i2c5_dis_sd_muxreg, + .nmuxregs = ARRAY_SIZE(i2c5_dis_sd_muxreg), + }, +}; + +static struct spear_pingroup i2c5_dis_sd_pingroup = { + .name = "i2c5_dis_sd_grp", + .pins = i2c5_dis_sd_pins, + .npins = ARRAY_SIZE(i2c5_dis_sd_pins), + .modemuxs = i2c5_dis_sd_modemux, + .nmodemuxs = ARRAY_SIZE(i2c5_dis_sd_modemux), +}; + +static const char *const i2c_4_5_grps[] = { "i2c5_dis_sd_grp", + "i2c4_dis_sd_grp", "i2c_4_5_dis_smi_grp" }; +static struct spear_function i2c_4_5_function = { + .name = "i2c_4_5", + .groups = i2c_4_5_grps, + .ngroups = ARRAY_SIZE(i2c_4_5_grps), +}; + +/* Pad multiplexing for i2c_6_7_dis_kbd device */ +/* Muxed with KBD */ +static const unsigned i2c_6_7_dis_kbd_pins[] = { 207, 208, 209, 210 }; +static struct spear_muxreg i2c_6_7_dis_kbd_muxreg[] = { + { + .reg = PAD_FUNCTION_EN_1, + .mask = PMX_KBD_ROWCOL25_MASK, + .val = 0, + }, +}; + +static struct spear_modemux i2c_6_7_dis_kbd_modemux[] = { + { + .muxregs = i2c_6_7_dis_kbd_muxreg, + .nmuxregs = ARRAY_SIZE(i2c_6_7_dis_kbd_muxreg), + }, +}; + +static struct spear_pingroup i2c_6_7_dis_kbd_pingroup = { + .name = "i2c_6_7_dis_kbd_grp", + .pins = i2c_6_7_dis_kbd_pins, + .npins = ARRAY_SIZE(i2c_6_7_dis_kbd_pins), + .modemuxs = i2c_6_7_dis_kbd_modemux, + .nmodemuxs = ARRAY_SIZE(i2c_6_7_dis_kbd_modemux), +}; + +/* Pad multiplexing for i2c6_dis_sd device */ +/* Muxed with SD/MMC */ +static const unsigned i2c6_dis_sd_pins[] = { 236, 237 }; +static struct spear_muxreg i2c6_dis_sd_muxreg[] = { + { + .reg = PAD_FUNCTION_EN_2, + .mask = PMX_MCIIORDRE_MASK | + PMX_MCIIOWRWE_MASK, + .val = 0, + }, +}; + +static struct spear_modemux i2c6_dis_sd_modemux[] = { + { + .muxregs = i2c6_dis_sd_muxreg, + .nmuxregs = ARRAY_SIZE(i2c6_dis_sd_muxreg), + }, +}; + +static struct spear_pingroup i2c6_dis_sd_pingroup = { + .name = "i2c6_dis_sd_grp", + .pins = i2c6_dis_sd_pins, + .npins = ARRAY_SIZE(i2c6_dis_sd_pins), + .modemuxs = i2c6_dis_sd_modemux, + .nmodemuxs = ARRAY_SIZE(i2c6_dis_sd_modemux), +}; + +/* Pad multiplexing for i2c7_dis_sd device */ +static const unsigned i2c7_dis_sd_pins[] = { 238, 239 }; +static struct spear_muxreg i2c7_dis_sd_muxreg[] = { + { + .reg = PAD_FUNCTION_EN_2, + .mask = PMX_MCIRESETCF_MASK | + PMX_MCICS0CE_MASK, + .val = 0, + }, +}; + +static struct spear_modemux i2c7_dis_sd_modemux[] = { + { + .muxregs = i2c7_dis_sd_muxreg, + .nmuxregs = ARRAY_SIZE(i2c7_dis_sd_muxreg), + }, +}; + +static struct spear_pingroup i2c7_dis_sd_pingroup = { + .name = "i2c7_dis_sd_grp", + .pins = i2c7_dis_sd_pins, + .npins = ARRAY_SIZE(i2c7_dis_sd_pins), + .modemuxs = i2c7_dis_sd_modemux, + .nmodemuxs = ARRAY_SIZE(i2c7_dis_sd_modemux), +}; + +static const char *const i2c_6_7_grps[] = { "i2c6_dis_sd_grp", + "i2c7_dis_sd_grp", "i2c_6_7_dis_kbd_grp" }; +static struct spear_function i2c_6_7_function = { + .name = "i2c_6_7", + .groups = i2c_6_7_grps, + .ngroups = ARRAY_SIZE(i2c_6_7_grps), +}; + +/* Pad multiplexing for can0_dis_nor device */ +/* Muxed with NOR */ +static const unsigned can0_dis_nor_pins[] = { 56, 57 }; +static struct spear_muxreg can0_dis_nor_muxreg[] = { + { + .reg = PAD_FUNCTION_EN_0, + .mask = PMX_NFRSTPWDWN2_MASK, + .val = 0, + }, { + .reg = PAD_FUNCTION_EN_1, + .mask = PMX_NFRSTPWDWN3_MASK, + .val = 0, + }, +}; + +static struct spear_modemux can0_dis_nor_modemux[] = { + { + .muxregs = can0_dis_nor_muxreg, + .nmuxregs = ARRAY_SIZE(can0_dis_nor_muxreg), + }, +}; + +static struct spear_pingroup can0_dis_nor_pingroup = { + .name = "can0_dis_nor_grp", + .pins = can0_dis_nor_pins, + .npins = ARRAY_SIZE(can0_dis_nor_pins), + .modemuxs = can0_dis_nor_modemux, + .nmodemuxs = ARRAY_SIZE(can0_dis_nor_modemux), +}; + +/* Pad multiplexing for can0_dis_sd device */ +/* Muxed with SD/MMC */ +static const unsigned can0_dis_sd_pins[] = { 240, 241 }; +static struct spear_muxreg can0_dis_sd_muxreg[] = { + { + .reg = PAD_FUNCTION_EN_2, + .mask = PMX_MCICFINTR_MASK | PMX_MCIIORDY_MASK, + .val = 0, + }, +}; + +static struct spear_modemux can0_dis_sd_modemux[] = { + { + .muxregs = can0_dis_sd_muxreg, + .nmuxregs = ARRAY_SIZE(can0_dis_sd_muxreg), + }, +}; + +static struct spear_pingroup can0_dis_sd_pingroup = { + .name = "can0_dis_sd_grp", + .pins = can0_dis_sd_pins, + .npins = ARRAY_SIZE(can0_dis_sd_pins), + .modemuxs = can0_dis_sd_modemux, + .nmodemuxs = ARRAY_SIZE(can0_dis_sd_modemux), +}; + +static const char *const can0_grps[] = { "can0_dis_nor_grp", "can0_dis_sd_grp" +}; +static struct spear_function can0_function = { + .name = "can0", + .groups = can0_grps, + .ngroups = ARRAY_SIZE(can0_grps), +}; + +/* Pad multiplexing for can1_dis_sd device */ +/* Muxed with SD/MMC */ +static const unsigned can1_dis_sd_pins[] = { 242, 243 }; +static struct spear_muxreg can1_dis_sd_muxreg[] = { + { + .reg = PAD_FUNCTION_EN_2, + .mask = PMX_MCICS1_MASK | PMX_MCIDMAACK_MASK, + .val = 0, + }, +}; + +static struct spear_modemux can1_dis_sd_modemux[] = { + { + .muxregs = can1_dis_sd_muxreg, + .nmuxregs = ARRAY_SIZE(can1_dis_sd_muxreg), + }, +}; + +static struct spear_pingroup can1_dis_sd_pingroup = { + .name = "can1_dis_sd_grp", + .pins = can1_dis_sd_pins, + .npins = ARRAY_SIZE(can1_dis_sd_pins), + .modemuxs = can1_dis_sd_modemux, + .nmodemuxs = ARRAY_SIZE(can1_dis_sd_modemux), +}; + +/* Pad multiplexing for can1_dis_kbd device */ +/* Muxed with KBD */ +static const unsigned can1_dis_kbd_pins[] = { 201, 202 }; +static struct spear_muxreg can1_dis_kbd_muxreg[] = { + { + .reg = PAD_FUNCTION_EN_1, + .mask = PMX_KBD_ROWCOL25_MASK, + .val = 0, + }, +}; + +static struct spear_modemux can1_dis_kbd_modemux[] = { + { + .muxregs = can1_dis_kbd_muxreg, + .nmuxregs = ARRAY_SIZE(can1_dis_kbd_muxreg), + }, +}; + +static struct spear_pingroup can1_dis_kbd_pingroup = { + .name = "can1_dis_kbd_grp", + .pins = can1_dis_kbd_pins, + .npins = ARRAY_SIZE(can1_dis_kbd_pins), + .modemuxs = can1_dis_kbd_modemux, + .nmodemuxs = ARRAY_SIZE(can1_dis_kbd_modemux), +}; + +static const char *const can1_grps[] = { "can1_dis_sd_grp", "can1_dis_kbd_grp" +}; +static struct spear_function can1_function = { + .name = "can1", + .groups = can1_grps, + .ngroups = ARRAY_SIZE(can1_grps), +}; + +/* Pad multiplexing for pci device */ +static const unsigned pci_sata_pins[] = { 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 18, + 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, + 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50, 51, 52, 53, 54, + 55, 86, 87, 88, 89, 90, 91, 92, 93, 94, 95, 96, 97, 98, 99 }; +#define PCI_SATA_MUXREG \ + { \ + .reg = PAD_FUNCTION_EN_0, \ + .mask = PMX_MCI_DATA8_15_MASK, \ + .val = 0, \ + }, { \ + .reg = PAD_FUNCTION_EN_1, \ + .mask = PMX_PCI_REG1_MASK, \ + .val = 0, \ + }, { \ + .reg = PAD_FUNCTION_EN_2, \ + .mask = PMX_PCI_REG2_MASK, \ + .val = 0, \ + } + +/* pad multiplexing for pcie0 device */ +static struct spear_muxreg pcie0_muxreg[] = { + PCI_SATA_MUXREG, + { + .reg = PCIE_SATA_CFG, + .mask = PCIE_CFG_VAL(0), + .val = PCIE_CFG_VAL(0), + }, +}; + +static struct spear_modemux pcie0_modemux[] = { + { + .muxregs = pcie0_muxreg, + .nmuxregs = ARRAY_SIZE(pcie0_muxreg), + }, +}; + +static struct spear_pingroup pcie0_pingroup = { + .name = "pcie0_grp", + .pins = pci_sata_pins, + .npins = ARRAY_SIZE(pci_sata_pins), + .modemuxs = pcie0_modemux, + .nmodemuxs = ARRAY_SIZE(pcie0_modemux), +}; + +/* pad multiplexing for pcie1 device */ +static struct spear_muxreg pcie1_muxreg[] = { + PCI_SATA_MUXREG, + { + .reg = PCIE_SATA_CFG, + .mask = PCIE_CFG_VAL(1), + .val = PCIE_CFG_VAL(1), + }, +}; + +static struct spear_modemux pcie1_modemux[] = { + { + .muxregs = pcie1_muxreg, + .nmuxregs = ARRAY_SIZE(pcie1_muxreg), + }, +}; + +static struct spear_pingroup pcie1_pingroup = { + .name = "pcie1_grp", + .pins = pci_sata_pins, + .npins = ARRAY_SIZE(pci_sata_pins), + .modemuxs = pcie1_modemux, + .nmodemuxs = ARRAY_SIZE(pcie1_modemux), +}; + +/* pad multiplexing for pcie2 device */ +static struct spear_muxreg pcie2_muxreg[] = { + PCI_SATA_MUXREG, + { + .reg = PCIE_SATA_CFG, + .mask = PCIE_CFG_VAL(2), + .val = PCIE_CFG_VAL(2), + }, +}; + +static struct spear_modemux pcie2_modemux[] = { + { + .muxregs = pcie2_muxreg, + .nmuxregs = ARRAY_SIZE(pcie2_muxreg), + }, +}; + +static struct spear_pingroup pcie2_pingroup = { + .name = "pcie2_grp", + .pins = pci_sata_pins, + .npins = ARRAY_SIZE(pci_sata_pins), + .modemuxs = pcie2_modemux, + .nmodemuxs = ARRAY_SIZE(pcie2_modemux), +}; + +static const char *const pci_grps[] = { "pcie0_grp", "pcie1_grp", "pcie2_grp" }; +static struct spear_function pci_function = { + .name = "pci", + .groups = pci_grps, + .ngroups = ARRAY_SIZE(pci_grps), +}; + +/* pad multiplexing for sata0 device */ +static struct spear_muxreg sata0_muxreg[] = { + PCI_SATA_MUXREG, + { + .reg = PCIE_SATA_CFG, + .mask = SATA_CFG_VAL(0), + .val = SATA_CFG_VAL(0), + }, +}; + +static struct spear_modemux sata0_modemux[] = { + { + .muxregs = sata0_muxreg, + .nmuxregs = ARRAY_SIZE(sata0_muxreg), + }, +}; + +static struct spear_pingroup sata0_pingroup = { + .name = "sata0_grp", + .pins = pci_sata_pins, + .npins = ARRAY_SIZE(pci_sata_pins), + .modemuxs = sata0_modemux, + .nmodemuxs = ARRAY_SIZE(sata0_modemux), +}; + +/* pad multiplexing for sata1 device */ +static struct spear_muxreg sata1_muxreg[] = { + PCI_SATA_MUXREG, + { + .reg = PCIE_SATA_CFG, + .mask = SATA_CFG_VAL(1), + .val = SATA_CFG_VAL(1), + }, +}; + +static struct spear_modemux sata1_modemux[] = { + { + .muxregs = sata1_muxreg, + .nmuxregs = ARRAY_SIZE(sata1_muxreg), + }, +}; + +static struct spear_pingroup sata1_pingroup = { + .name = "sata1_grp", + .pins = pci_sata_pins, + .npins = ARRAY_SIZE(pci_sata_pins), + .modemuxs = sata1_modemux, + .nmodemuxs = ARRAY_SIZE(sata1_modemux), +}; + +/* pad multiplexing for sata2 device */ +static struct spear_muxreg sata2_muxreg[] = { + PCI_SATA_MUXREG, + { + .reg = PCIE_SATA_CFG, + .mask = SATA_CFG_VAL(2), + .val = SATA_CFG_VAL(2), + }, +}; + +static struct spear_modemux sata2_modemux[] = { + { + .muxregs = sata2_muxreg, + .nmuxregs = ARRAY_SIZE(sata2_muxreg), + }, +}; + +static struct spear_pingroup sata2_pingroup = { + .name = "sata2_grp", + .pins = pci_sata_pins, + .npins = ARRAY_SIZE(pci_sata_pins), + .modemuxs = sata2_modemux, + .nmodemuxs = ARRAY_SIZE(sata2_modemux), +}; + +static const char *const sata_grps[] = { "sata0_grp", "sata1_grp", "sata2_grp" +}; +static struct spear_function sata_function = { + .name = "sata", + .groups = sata_grps, + .ngroups = ARRAY_SIZE(sata_grps), +}; + +/* Pad multiplexing for ssp1_dis_kbd device */ +static const unsigned ssp1_dis_kbd_pins[] = { 203, 204, 205, 206 }; +static struct spear_muxreg ssp1_dis_kbd_muxreg[] = { + { + .reg = PAD_FUNCTION_EN_1, + .mask = PMX_KBD_ROWCOL25_MASK | PMX_KBD_COL1_MASK | + PMX_KBD_COL0_MASK | PMX_NFIO8_15_MASK | PMX_NFCE1_MASK | + PMX_NFCE2_MASK, + .val = 0, + }, +}; + +static struct spear_modemux ssp1_dis_kbd_modemux[] = { + { + .muxregs = ssp1_dis_kbd_muxreg, + .nmuxregs = ARRAY_SIZE(ssp1_dis_kbd_muxreg), + }, +}; + +static struct spear_pingroup ssp1_dis_kbd_pingroup = { + .name = "ssp1_dis_kbd_grp", + .pins = ssp1_dis_kbd_pins, + .npins = ARRAY_SIZE(ssp1_dis_kbd_pins), + .modemuxs = ssp1_dis_kbd_modemux, + .nmodemuxs = ARRAY_SIZE(ssp1_dis_kbd_modemux), +}; + +/* Pad multiplexing for ssp1_dis_sd device */ +static const unsigned ssp1_dis_sd_pins[] = { 224, 226, 227, 228 }; +static struct spear_muxreg ssp1_dis_sd_muxreg[] = { + { + .reg = PAD_FUNCTION_EN_2, + .mask = PMX_MCIADDR0ALE_MASK | PMX_MCIADDR2_MASK | + PMX_MCICECF_MASK | PMX_MCICEXD_MASK, + .val = 0, + }, +}; + +static struct spear_modemux ssp1_dis_sd_modemux[] = { + { + .muxregs = ssp1_dis_sd_muxreg, + .nmuxregs = ARRAY_SIZE(ssp1_dis_sd_muxreg), + }, +}; + +static struct spear_pingroup ssp1_dis_sd_pingroup = { + .name = "ssp1_dis_sd_grp", + .pins = ssp1_dis_sd_pins, + .npins = ARRAY_SIZE(ssp1_dis_sd_pins), + .modemuxs = ssp1_dis_sd_modemux, + .nmodemuxs = ARRAY_SIZE(ssp1_dis_sd_modemux), +}; + +static const char *const ssp1_grps[] = { "ssp1_dis_kbd_grp", + "ssp1_dis_sd_grp" }; +static struct spear_function ssp1_function = { + .name = "ssp1", + .groups = ssp1_grps, + .ngroups = ARRAY_SIZE(ssp1_grps), +}; + +/* Pad multiplexing for gpt64 device */ +static const unsigned gpt64_pins[] = { 230, 231, 232, 245 }; +static struct spear_muxreg gpt64_muxreg[] = { + { + .reg = PAD_FUNCTION_EN_2, + .mask = PMX_MCICDCF1_MASK | PMX_MCICDCF2_MASK | PMX_MCICDXD_MASK + | PMX_MCILEDS_MASK, + .val = 0, + }, +}; + +static struct spear_modemux gpt64_modemux[] = { + { + .muxregs = gpt64_muxreg, + .nmuxregs = ARRAY_SIZE(gpt64_muxreg), + }, +}; + +static struct spear_pingroup gpt64_pingroup = { + .name = "gpt64_grp", + .pins = gpt64_pins, + .npins = ARRAY_SIZE(gpt64_pins), + .modemuxs = gpt64_modemux, + .nmodemuxs = ARRAY_SIZE(gpt64_modemux), +}; + +static const char *const gpt64_grps[] = { "gpt64_grp" }; +static struct spear_function gpt64_function = { + .name = "gpt64", + .groups = gpt64_grps, + .ngroups = ARRAY_SIZE(gpt64_grps), +}; + +/* pingroups */ +static struct spear_pingroup *spear1310_pingroups[] = { + &i2c0_pingroup, + &ssp0_pingroup, + &i2s0_pingroup, + &i2s1_pingroup, + &clcd_pingroup, + &clcd_high_res_pingroup, + &arm_gpio_pingroup, + &smi_2_chips_pingroup, + &smi_4_chips_pingroup, + &gmii_pingroup, + &rgmii_pingroup, + &smii_0_1_2_pingroup, + &ras_mii_txclk_pingroup, + &nand_8bit_pingroup, + &nand_16bit_pingroup, + &nand_4_chips_pingroup, + &keyboard_6x6_pingroup, + &keyboard_rowcol6_8_pingroup, + &uart0_pingroup, + &uart0_modem_pingroup, + &gpt0_tmr0_pingroup, + &gpt0_tmr1_pingroup, + &gpt1_tmr0_pingroup, + &gpt1_tmr1_pingroup, + &sdhci_pingroup, + &cf_pingroup, + &xd_pingroup, + &touch_xy_pingroup, + &ssp0_cs0_pingroup, + &ssp0_cs1_2_pingroup, + &uart_1_dis_i2c_pingroup, + &uart_1_dis_sd_pingroup, + &uart_2_3_pingroup, + &uart_4_pingroup, + &uart_5_pingroup, + &rs485_0_1_tdm_0_1_pingroup, + &i2c_1_2_pingroup, + &i2c3_dis_smi_clcd_pingroup, + &i2c3_dis_sd_i2s0_pingroup, + &i2c_4_5_dis_smi_pingroup, + &i2c4_dis_sd_pingroup, + &i2c5_dis_sd_pingroup, + &i2c_6_7_dis_kbd_pingroup, + &i2c6_dis_sd_pingroup, + &i2c7_dis_sd_pingroup, + &can0_dis_nor_pingroup, + &can0_dis_sd_pingroup, + &can1_dis_sd_pingroup, + &can1_dis_kbd_pingroup, + &pcie0_pingroup, + &pcie1_pingroup, + &pcie2_pingroup, + &sata0_pingroup, + &sata1_pingroup, + &sata2_pingroup, + &ssp1_dis_kbd_pingroup, + &ssp1_dis_sd_pingroup, + &gpt64_pingroup, +}; + +/* functions */ +static struct spear_function *spear1310_functions[] = { + &i2c0_function, + &ssp0_function, + &i2s0_function, + &i2s1_function, + &clcd_function, + &arm_gpio_function, + &smi_function, + &gmii_function, + &rgmii_function, + &smii_0_1_2_function, + &ras_mii_txclk_function, + &nand_function, + &keyboard_function, + &uart0_function, + &gpt0_function, + &gpt1_function, + &sdhci_function, + &cf_function, + &xd_function, + &touch_xy_function, + &uart1_function, + &uart2_3_function, + &uart4_function, + &uart5_function, + &rs485_0_1_tdm_0_1_function, + &i2c_1_2_function, + &i2c3_unction, + &i2c_4_5_function, + &i2c_6_7_function, + &can0_function, + &can1_function, + &pci_function, + &sata_function, + &ssp1_function, + &gpt64_function, +}; + +static struct spear_pinctrl_machdata spear1310_machdata = { + .pins = spear1310_pins, + .npins = ARRAY_SIZE(spear1310_pins), + .groups = spear1310_pingroups, + .ngroups = ARRAY_SIZE(spear1310_pingroups), + .functions = spear1310_functions, + .nfunctions = ARRAY_SIZE(spear1310_functions), + .modes_supported = false, +}; + +static struct of_device_id spear1310_pinctrl_of_match[] __devinitdata = { + { + .compatible = "st,spear1310-pinmux", + }, + {}, +}; + +static int __devinit spear1310_pinctrl_probe(struct platform_device *pdev) +{ + return spear_pinctrl_probe(pdev, &spear1310_machdata); +} + +static int __devexit spear1310_pinctrl_remove(struct platform_device *pdev) +{ + return spear_pinctrl_remove(pdev); +} + +static struct platform_driver spear1310_pinctrl_driver = { + .driver = { + .name = DRIVER_NAME, + .owner = THIS_MODULE, + .of_match_table = spear1310_pinctrl_of_match, + }, + .probe = spear1310_pinctrl_probe, + .remove = __devexit_p(spear1310_pinctrl_remove), +}; + +static int __init spear1310_pinctrl_init(void) +{ + return platform_driver_register(&spear1310_pinctrl_driver); +} +arch_initcall(spear1310_pinctrl_init); + +static void __exit spear1310_pinctrl_exit(void) +{ + platform_driver_unregister(&spear1310_pinctrl_driver); +} +module_exit(spear1310_pinctrl_exit); + +MODULE_AUTHOR("Viresh Kumar "); +MODULE_DESCRIPTION("ST Microelectronics SPEAr1310 pinctrl driver"); +MODULE_LICENSE("GPL v2"); +MODULE_DEVICE_TABLE(of, spear1310_pinctrl_of_match); diff --git a/drivers/pinctrl/spear/pinctrl-spear1340.c b/drivers/pinctrl/spear/pinctrl-spear1340.c new file mode 100644 index 000000000000..a8ab2a6f51bf --- /dev/null +++ b/drivers/pinctrl/spear/pinctrl-spear1340.c @@ -0,0 +1,1989 @@ +/* + * Driver for the ST Microelectronics SPEAr1340 pinmux + * + * Copyright (C) 2012 ST Microelectronics + * Viresh Kumar + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include +#include +#include +#include +#include +#include "pinctrl-spear.h" + +#define DRIVER_NAME "spear1340-pinmux" + +/* pins */ +static const struct pinctrl_pin_desc spear1340_pins[] = { + SPEAR_PIN_0_TO_101, + SPEAR_PIN_102_TO_245, + PINCTRL_PIN(246, "PLGPIO246"), + PINCTRL_PIN(247, "PLGPIO247"), + PINCTRL_PIN(248, "PLGPIO248"), + PINCTRL_PIN(249, "PLGPIO249"), + PINCTRL_PIN(250, "PLGPIO250"), + PINCTRL_PIN(251, "PLGPIO251"), +}; + +/* In SPEAr1340 there are two levels of pad muxing */ +/* - pads as gpio OR peripherals */ +#define PAD_FUNCTION_EN_1 0x668 +#define PAD_FUNCTION_EN_2 0x66C +#define PAD_FUNCTION_EN_3 0x670 +#define PAD_FUNCTION_EN_4 0x674 +#define PAD_FUNCTION_EN_5 0x690 +#define PAD_FUNCTION_EN_6 0x694 +#define PAD_FUNCTION_EN_7 0x698 +#define PAD_FUNCTION_EN_8 0x69C + +/* - If peripherals, then primary OR alternate peripheral */ +#define PAD_SHARED_IP_EN_1 0x6A0 +#define PAD_SHARED_IP_EN_2 0x6A4 + +/* + * Macro's for first level of pmx - pads as gpio OR peripherals. There are 8 + * registers with 32 bits each for handling gpio pads, register 8 has only 26 + * relevant bits. + */ +/* macro's for making pads as gpio's */ +#define PADS_AS_GPIO_REG0_MASK 0xFFFFFFFE +#define PADS_AS_GPIO_REGS_MASK 0xFFFFFFFF +#define PADS_AS_GPIO_REG7_MASK 0x07FFFFFF + +/* macro's for making pads as peripherals */ +#define FSMC_16_BIT_AND_KBD_ROW_COL_REG0_MASK 0x00000FFE +#define UART0_ENH_AND_GPT_REG0_MASK 0x0003F000 +#define PWM1_AND_KBD_COL5_REG0_MASK 0x00040000 +#define I2C1_REG0_MASK 0x01080000 +#define SPDIF_IN_REG0_MASK 0x00100000 +#define PWM2_AND_GPT0_TMR0_CPT_REG0_MASK 0x00400000 +#define PWM3_AND_GPT0_TMR1_CLK_REG0_MASK 0x00800000 +#define PWM0_AND_SSP0_CS1_REG0_MASK 0x02000000 +#define VIP_AND_CAM3_REG0_MASK 0xFC200000 +#define VIP_AND_CAM3_REG1_MASK 0x0000000F +#define VIP_REG1_MASK 0x00001EF0 +#define VIP_AND_CAM2_REG1_MASK 0x007FE100 +#define VIP_AND_CAM1_REG1_MASK 0xFF800000 +#define VIP_AND_CAM1_REG2_MASK 0x00000003 +#define VIP_AND_CAM0_REG2_MASK 0x00001FFC +#define SMI_REG2_MASK 0x0021E000 +#define SSP0_REG2_MASK 0x001E0000 +#define TS_AND_SSP0_CS2_REG2_MASK 0x00400000 +#define UART0_REG2_MASK 0x01800000 +#define UART1_REG2_MASK 0x06000000 +#define I2S_IN_REG2_MASK 0xF8000000 +#define DEVS_GRP_AND_MIPHY_DBG_REG3_MASK 0x000001FE +#define I2S_OUT_REG3_MASK 0x000001EF +#define I2S_IN_REG3_MASK 0x00000010 +#define GMAC_REG3_MASK 0xFFFFFE00 +#define GMAC_REG4_MASK 0x0000001F +#define DEVS_GRP_AND_MIPHY_DBG_REG4_MASK 0x7FFFFF20 +#define SSP0_CS3_REG4_MASK 0x00000020 +#define I2C0_REG4_MASK 0x000000C0 +#define CEC0_REG4_MASK 0x00000100 +#define CEC1_REG4_MASK 0x00000200 +#define SPDIF_OUT_REG4_MASK 0x00000400 +#define CLCD_REG4_MASK 0x7FFFF800 +#define CLCD_AND_ARM_TRACE_REG4_MASK 0x80000000 +#define CLCD_AND_ARM_TRACE_REG5_MASK 0xFFFFFFFF +#define CLCD_AND_ARM_TRACE_REG6_MASK 0x00000001 +#define FSMC_PNOR_AND_MCIF_REG6_MASK 0x073FFFFE +#define MCIF_REG6_MASK 0xF8C00000 +#define MCIF_REG7_MASK 0x000043FF +#define FSMC_8BIT_REG7_MASK 0x07FFBC00 + +/* other registers */ +#define PERIP_CFG 0x42C + /* PERIP_CFG register masks */ + #define SSP_CS_CTL_HW 0 + #define SSP_CS_CTL_SW 1 + #define SSP_CS_CTL_MASK 1 + #define SSP_CS_CTL_SHIFT 21 + #define SSP_CS_VAL_MASK 1 + #define SSP_CS_VAL_SHIFT 20 + #define SSP_CS_SEL_CS0 0 + #define SSP_CS_SEL_CS1 1 + #define SSP_CS_SEL_CS2 2 + #define SSP_CS_SEL_MASK 3 + #define SSP_CS_SEL_SHIFT 18 + + #define I2S_CHNL_2_0 (0) + #define I2S_CHNL_3_1 (1) + #define I2S_CHNL_5_1 (2) + #define I2S_CHNL_7_1 (3) + #define I2S_CHNL_PLAY_SHIFT (4) + #define I2S_CHNL_PLAY_MASK (3 << 4) + #define I2S_CHNL_REC_SHIFT (6) + #define I2S_CHNL_REC_MASK (3 << 6) + + #define SPDIF_OUT_ENB_MASK (1 << 2) + #define SPDIF_OUT_ENB_SHIFT 2 + + #define MCIF_SEL_SD 1 + #define MCIF_SEL_CF 2 + #define MCIF_SEL_XD 3 + #define MCIF_SEL_MASK 3 + #define MCIF_SEL_SHIFT 0 + +#define GMAC_CLK_CFG 0x248 + #define GMAC_PHY_IF_GMII_VAL (0 << 3) + #define GMAC_PHY_IF_RGMII_VAL (1 << 3) + #define GMAC_PHY_IF_SGMII_VAL (2 << 3) + #define GMAC_PHY_IF_RMII_VAL (4 << 3) + #define GMAC_PHY_IF_SEL_MASK (7 << 3) + #define GMAC_PHY_INPUT_ENB_VAL 0 + #define GMAC_PHY_SYNT_ENB_VAL 1 + #define GMAC_PHY_CLK_MASK 1 + #define GMAC_PHY_CLK_SHIFT 2 + #define GMAC_PHY_125M_PAD_VAL 0 + #define GMAC_PHY_PLL2_VAL 1 + #define GMAC_PHY_OSC3_VAL 2 + #define GMAC_PHY_INPUT_CLK_MASK 3 + #define GMAC_PHY_INPUT_CLK_SHIFT 0 + +#define PCIE_SATA_CFG 0x424 + /* PCIE CFG MASks */ + #define PCIE_CFG_DEVICE_PRESENT (1 << 11) + #define PCIE_CFG_POWERUP_RESET (1 << 10) + #define PCIE_CFG_CORE_CLK_EN (1 << 9) + #define PCIE_CFG_AUX_CLK_EN (1 << 8) + #define SATA_CFG_TX_CLK_EN (1 << 4) + #define SATA_CFG_RX_CLK_EN (1 << 3) + #define SATA_CFG_POWERUP_RESET (1 << 2) + #define SATA_CFG_PM_CLK_EN (1 << 1) + #define PCIE_SATA_SEL_PCIE (0) + #define PCIE_SATA_SEL_SATA (1) + #define SATA_PCIE_CFG_MASK 0xF1F + #define PCIE_CFG_VAL (PCIE_SATA_SEL_PCIE | PCIE_CFG_AUX_CLK_EN | \ + PCIE_CFG_CORE_CLK_EN | PCIE_CFG_POWERUP_RESET |\ + PCIE_CFG_DEVICE_PRESENT) + #define SATA_CFG_VAL (PCIE_SATA_SEL_SATA | SATA_CFG_PM_CLK_EN | \ + SATA_CFG_POWERUP_RESET | SATA_CFG_RX_CLK_EN | \ + SATA_CFG_TX_CLK_EN) + +/* Macro's for second level of pmx - pads as primary OR alternate peripheral */ +/* Write 0 to enable FSMC_16_BIT */ +#define KBD_ROW_COL_MASK (1 << 0) + +/* Write 0 to enable UART0_ENH */ +#define GPT_MASK (1 << 1) /* Only clk & cpt */ + +/* Write 0 to enable PWM1 */ +#define KBD_COL5_MASK (1 << 2) + +/* Write 0 to enable PWM2 */ +#define GPT0_TMR0_CPT_MASK (1 << 3) /* Only clk & cpt */ + +/* Write 0 to enable PWM3 */ +#define GPT0_TMR1_CLK_MASK (1 << 4) /* Only clk & cpt */ + +/* Write 0 to enable PWM0 */ +#define SSP0_CS1_MASK (1 << 5) + +/* Write 0 to enable VIP */ +#define CAM3_MASK (1 << 6) + +/* Write 0 to enable VIP */ +#define CAM2_MASK (1 << 7) + +/* Write 0 to enable VIP */ +#define CAM1_MASK (1 << 8) + +/* Write 0 to enable VIP */ +#define CAM0_MASK (1 << 9) + +/* Write 0 to enable TS */ +#define SSP0_CS2_MASK (1 << 10) + +/* Write 0 to enable FSMC PNOR */ +#define MCIF_MASK (1 << 11) + +/* Write 0 to enable CLCD */ +#define ARM_TRACE_MASK (1 << 12) + +/* Write 0 to enable I2S, SSP0_CS2, CEC0, 1, SPDIF out, CLCD */ +#define MIPHY_DBG_MASK (1 << 13) + +/* + * Pad multiplexing for making all pads as gpio's. This is done to override the + * values passed from bootloader and start from scratch. + */ +static const unsigned pads_as_gpio_pins[] = { 251 }; +static struct spear_muxreg pads_as_gpio_muxreg[] = { + { + .reg = PAD_FUNCTION_EN_1, + .mask = PADS_AS_GPIO_REG0_MASK, + .val = 0x0, + }, { + .reg = PAD_FUNCTION_EN_2, + .mask = PADS_AS_GPIO_REGS_MASK, + .val = 0x0, + }, { + .reg = PAD_FUNCTION_EN_3, + .mask = PADS_AS_GPIO_REGS_MASK, + .val = 0x0, + }, { + .reg = PAD_FUNCTION_EN_4, + .mask = PADS_AS_GPIO_REGS_MASK, + .val = 0x0, + }, { + .reg = PAD_FUNCTION_EN_5, + .mask = PADS_AS_GPIO_REGS_MASK, + .val = 0x0, + }, { + .reg = PAD_FUNCTION_EN_6, + .mask = PADS_AS_GPIO_REGS_MASK, + .val = 0x0, + }, { + .reg = PAD_FUNCTION_EN_7, + .mask = PADS_AS_GPIO_REGS_MASK, + .val = 0x0, + }, { + .reg = PAD_FUNCTION_EN_8, + .mask = PADS_AS_GPIO_REG7_MASK, + .val = 0x0, + }, +}; + +static struct spear_modemux pads_as_gpio_modemux[] = { + { + .muxregs = pads_as_gpio_muxreg, + .nmuxregs = ARRAY_SIZE(pads_as_gpio_muxreg), + }, +}; + +static struct spear_pingroup pads_as_gpio_pingroup = { + .name = "pads_as_gpio_grp", + .pins = pads_as_gpio_pins, + .npins = ARRAY_SIZE(pads_as_gpio_pins), + .modemuxs = pads_as_gpio_modemux, + .nmodemuxs = ARRAY_SIZE(pads_as_gpio_modemux), +}; + +static const char *const pads_as_gpio_grps[] = { "pads_as_gpio_grp" }; +static struct spear_function pads_as_gpio_function = { + .name = "pads_as_gpio", + .groups = pads_as_gpio_grps, + .ngroups = ARRAY_SIZE(pads_as_gpio_grps), +}; + +/* Pad multiplexing for fsmc_8bit device */ +static const unsigned fsmc_8bit_pins[] = { 233, 234, 235, 236, 238, 239, 240, + 241, 242, 243, 244, 245, 246, 247, 248, 249 }; +static struct spear_muxreg fsmc_8bit_muxreg[] = { + { + .reg = PAD_FUNCTION_EN_8, + .mask = FSMC_8BIT_REG7_MASK, + .val = FSMC_8BIT_REG7_MASK, + } +}; + +static struct spear_modemux fsmc_8bit_modemux[] = { + { + .muxregs = fsmc_8bit_muxreg, + .nmuxregs = ARRAY_SIZE(fsmc_8bit_muxreg), + }, +}; + +static struct spear_pingroup fsmc_8bit_pingroup = { + .name = "fsmc_8bit_grp", + .pins = fsmc_8bit_pins, + .npins = ARRAY_SIZE(fsmc_8bit_pins), + .modemuxs = fsmc_8bit_modemux, + .nmodemuxs = ARRAY_SIZE(fsmc_8bit_modemux), +}; + +/* Pad multiplexing for fsmc_16bit device */ +static const unsigned fsmc_16bit_pins[] = { 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10 }; +static struct spear_muxreg fsmc_16bit_muxreg[] = { + { + .reg = PAD_SHARED_IP_EN_1, + .mask = KBD_ROW_COL_MASK, + .val = 0, + }, { + .reg = PAD_FUNCTION_EN_1, + .mask = FSMC_16_BIT_AND_KBD_ROW_COL_REG0_MASK, + .val = FSMC_16_BIT_AND_KBD_ROW_COL_REG0_MASK, + }, +}; + +static struct spear_modemux fsmc_16bit_modemux[] = { + { + .muxregs = fsmc_16bit_muxreg, + .nmuxregs = ARRAY_SIZE(fsmc_16bit_muxreg), + }, +}; + +static struct spear_pingroup fsmc_16bit_pingroup = { + .name = "fsmc_16bit_grp", + .pins = fsmc_16bit_pins, + .npins = ARRAY_SIZE(fsmc_16bit_pins), + .modemuxs = fsmc_16bit_modemux, + .nmodemuxs = ARRAY_SIZE(fsmc_16bit_modemux), +}; + +/* pad multiplexing for fsmc_pnor device */ +static const unsigned fsmc_pnor_pins[] = { 192, 193, 194, 195, 196, 197, 198, + 199, 200, 201, 202, 203, 204, 205, 206, 207, 208, 209, 210, 211, 212, + 215, 216, 217 }; +static struct spear_muxreg fsmc_pnor_muxreg[] = { + { + .reg = PAD_SHARED_IP_EN_1, + .mask = MCIF_MASK, + .val = 0, + }, { + .reg = PAD_FUNCTION_EN_7, + .mask = FSMC_PNOR_AND_MCIF_REG6_MASK, + .val = FSMC_PNOR_AND_MCIF_REG6_MASK, + }, +}; + +static struct spear_modemux fsmc_pnor_modemux[] = { + { + .muxregs = fsmc_pnor_muxreg, + .nmuxregs = ARRAY_SIZE(fsmc_pnor_muxreg), + }, +}; + +static struct spear_pingroup fsmc_pnor_pingroup = { + .name = "fsmc_pnor_grp", + .pins = fsmc_pnor_pins, + .npins = ARRAY_SIZE(fsmc_pnor_pins), + .modemuxs = fsmc_pnor_modemux, + .nmodemuxs = ARRAY_SIZE(fsmc_pnor_modemux), +}; + +static const char *const fsmc_grps[] = { "fsmc_8bit_grp", "fsmc_16bit_grp", + "fsmc_pnor_grp" }; +static struct spear_function fsmc_function = { + .name = "fsmc", + .groups = fsmc_grps, + .ngroups = ARRAY_SIZE(fsmc_grps), +}; + +/* pad multiplexing for keyboard rows-cols device */ +static const unsigned keyboard_row_col_pins[] = { 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, + 10 }; +static struct spear_muxreg keyboard_row_col_muxreg[] = { + { + .reg = PAD_SHARED_IP_EN_1, + .mask = KBD_ROW_COL_MASK, + .val = KBD_ROW_COL_MASK, + }, { + .reg = PAD_FUNCTION_EN_1, + .mask = FSMC_16_BIT_AND_KBD_ROW_COL_REG0_MASK, + .val = FSMC_16_BIT_AND_KBD_ROW_COL_REG0_MASK, + }, +}; + +static struct spear_modemux keyboard_row_col_modemux[] = { + { + .muxregs = keyboard_row_col_muxreg, + .nmuxregs = ARRAY_SIZE(keyboard_row_col_muxreg), + }, +}; + +static struct spear_pingroup keyboard_row_col_pingroup = { + .name = "keyboard_row_col_grp", + .pins = keyboard_row_col_pins, + .npins = ARRAY_SIZE(keyboard_row_col_pins), + .modemuxs = keyboard_row_col_modemux, + .nmodemuxs = ARRAY_SIZE(keyboard_row_col_modemux), +}; + +/* pad multiplexing for keyboard col5 device */ +static const unsigned keyboard_col5_pins[] = { 17 }; +static struct spear_muxreg keyboard_col5_muxreg[] = { + { + .reg = PAD_SHARED_IP_EN_1, + .mask = KBD_COL5_MASK, + .val = KBD_COL5_MASK, + }, { + .reg = PAD_FUNCTION_EN_1, + .mask = PWM1_AND_KBD_COL5_REG0_MASK, + .val = PWM1_AND_KBD_COL5_REG0_MASK, + }, +}; + +static struct spear_modemux keyboard_col5_modemux[] = { + { + .muxregs = keyboard_col5_muxreg, + .nmuxregs = ARRAY_SIZE(keyboard_col5_muxreg), + }, +}; + +static struct spear_pingroup keyboard_col5_pingroup = { + .name = "keyboard_col5_grp", + .pins = keyboard_col5_pins, + .npins = ARRAY_SIZE(keyboard_col5_pins), + .modemuxs = keyboard_col5_modemux, + .nmodemuxs = ARRAY_SIZE(keyboard_col5_modemux), +}; + +static const char *const keyboard_grps[] = { "keyboard_row_col_grp", + "keyboard_col5_grp" }; +static struct spear_function keyboard_function = { + .name = "keyboard", + .groups = keyboard_grps, + .ngroups = ARRAY_SIZE(keyboard_grps), +}; + +/* pad multiplexing for spdif_in device */ +static const unsigned spdif_in_pins[] = { 19 }; +static struct spear_muxreg spdif_in_muxreg[] = { + { + .reg = PAD_FUNCTION_EN_1, + .mask = SPDIF_IN_REG0_MASK, + .val = SPDIF_IN_REG0_MASK, + }, +}; + +static struct spear_modemux spdif_in_modemux[] = { + { + .muxregs = spdif_in_muxreg, + .nmuxregs = ARRAY_SIZE(spdif_in_muxreg), + }, +}; + +static struct spear_pingroup spdif_in_pingroup = { + .name = "spdif_in_grp", + .pins = spdif_in_pins, + .npins = ARRAY_SIZE(spdif_in_pins), + .modemuxs = spdif_in_modemux, + .nmodemuxs = ARRAY_SIZE(spdif_in_modemux), +}; + +static const char *const spdif_in_grps[] = { "spdif_in_grp" }; +static struct spear_function spdif_in_function = { + .name = "spdif_in", + .groups = spdif_in_grps, + .ngroups = ARRAY_SIZE(spdif_in_grps), +}; + +/* pad multiplexing for spdif_out device */ +static const unsigned spdif_out_pins[] = { 137 }; +static struct spear_muxreg spdif_out_muxreg[] = { + { + .reg = PAD_FUNCTION_EN_5, + .mask = SPDIF_OUT_REG4_MASK, + .val = SPDIF_OUT_REG4_MASK, + }, { + .reg = PERIP_CFG, + .mask = SPDIF_OUT_ENB_MASK, + .val = SPDIF_OUT_ENB_MASK, + } +}; + +static struct spear_modemux spdif_out_modemux[] = { + { + .muxregs = spdif_out_muxreg, + .nmuxregs = ARRAY_SIZE(spdif_out_muxreg), + }, +}; + +static struct spear_pingroup spdif_out_pingroup = { + .name = "spdif_out_grp", + .pins = spdif_out_pins, + .npins = ARRAY_SIZE(spdif_out_pins), + .modemuxs = spdif_out_modemux, + .nmodemuxs = ARRAY_SIZE(spdif_out_modemux), +}; + +static const char *const spdif_out_grps[] = { "spdif_out_grp" }; +static struct spear_function spdif_out_function = { + .name = "spdif_out", + .groups = spdif_out_grps, + .ngroups = ARRAY_SIZE(spdif_out_grps), +}; + +/* pad multiplexing for gpt_0_1 device */ +static const unsigned gpt_0_1_pins[] = { 11, 12, 13, 14, 15, 16, 21, 22 }; +static struct spear_muxreg gpt_0_1_muxreg[] = { + { + .reg = PAD_SHARED_IP_EN_1, + .mask = GPT_MASK | GPT0_TMR0_CPT_MASK | GPT0_TMR1_CLK_MASK, + .val = GPT_MASK | GPT0_TMR0_CPT_MASK | GPT0_TMR1_CLK_MASK, + }, { + .reg = PAD_FUNCTION_EN_1, + .mask = UART0_ENH_AND_GPT_REG0_MASK | + PWM2_AND_GPT0_TMR0_CPT_REG0_MASK | + PWM3_AND_GPT0_TMR1_CLK_REG0_MASK, + .val = UART0_ENH_AND_GPT_REG0_MASK | + PWM2_AND_GPT0_TMR0_CPT_REG0_MASK | + PWM3_AND_GPT0_TMR1_CLK_REG0_MASK, + }, +}; + +static struct spear_modemux gpt_0_1_modemux[] = { + { + .muxregs = gpt_0_1_muxreg, + .nmuxregs = ARRAY_SIZE(gpt_0_1_muxreg), + }, +}; + +static struct spear_pingroup gpt_0_1_pingroup = { + .name = "gpt_0_1_grp", + .pins = gpt_0_1_pins, + .npins = ARRAY_SIZE(gpt_0_1_pins), + .modemuxs = gpt_0_1_modemux, + .nmodemuxs = ARRAY_SIZE(gpt_0_1_modemux), +}; + +static const char *const gpt_0_1_grps[] = { "gpt_0_1_grp" }; +static struct spear_function gpt_0_1_function = { + .name = "gpt_0_1", + .groups = gpt_0_1_grps, + .ngroups = ARRAY_SIZE(gpt_0_1_grps), +}; + +/* pad multiplexing for pwm0 device */ +static const unsigned pwm0_pins[] = { 24 }; +static struct spear_muxreg pwm0_muxreg[] = { + { + .reg = PAD_SHARED_IP_EN_1, + .mask = SSP0_CS1_MASK, + .val = 0, + }, { + .reg = PAD_FUNCTION_EN_1, + .mask = PWM0_AND_SSP0_CS1_REG0_MASK, + .val = PWM0_AND_SSP0_CS1_REG0_MASK, + }, +}; + +static struct spear_modemux pwm0_modemux[] = { + { + .muxregs = pwm0_muxreg, + .nmuxregs = ARRAY_SIZE(pwm0_muxreg), + }, +}; + +static struct spear_pingroup pwm0_pingroup = { + .name = "pwm0_grp", + .pins = pwm0_pins, + .npins = ARRAY_SIZE(pwm0_pins), + .modemuxs = pwm0_modemux, + .nmodemuxs = ARRAY_SIZE(pwm0_modemux), +}; + +/* pad multiplexing for pwm1 device */ +static const unsigned pwm1_pins[] = { 17 }; +static struct spear_muxreg pwm1_muxreg[] = { + { + .reg = PAD_SHARED_IP_EN_1, + .mask = KBD_COL5_MASK, + .val = 0, + }, { + .reg = PAD_FUNCTION_EN_1, + .mask = PWM1_AND_KBD_COL5_REG0_MASK, + .val = PWM1_AND_KBD_COL5_REG0_MASK, + }, +}; + +static struct spear_modemux pwm1_modemux[] = { + { + .muxregs = pwm1_muxreg, + .nmuxregs = ARRAY_SIZE(pwm1_muxreg), + }, +}; + +static struct spear_pingroup pwm1_pingroup = { + .name = "pwm1_grp", + .pins = pwm1_pins, + .npins = ARRAY_SIZE(pwm1_pins), + .modemuxs = pwm1_modemux, + .nmodemuxs = ARRAY_SIZE(pwm1_modemux), +}; + +/* pad multiplexing for pwm2 device */ +static const unsigned pwm2_pins[] = { 21 }; +static struct spear_muxreg pwm2_muxreg[] = { + { + .reg = PAD_SHARED_IP_EN_1, + .mask = GPT0_TMR0_CPT_MASK, + .val = 0, + }, { + .reg = PAD_FUNCTION_EN_1, + .mask = PWM2_AND_GPT0_TMR0_CPT_REG0_MASK, + .val = PWM2_AND_GPT0_TMR0_CPT_REG0_MASK, + }, +}; + +static struct spear_modemux pwm2_modemux[] = { + { + .muxregs = pwm2_muxreg, + .nmuxregs = ARRAY_SIZE(pwm2_muxreg), + }, +}; + +static struct spear_pingroup pwm2_pingroup = { + .name = "pwm2_grp", + .pins = pwm2_pins, + .npins = ARRAY_SIZE(pwm2_pins), + .modemuxs = pwm2_modemux, + .nmodemuxs = ARRAY_SIZE(pwm2_modemux), +}; + +/* pad multiplexing for pwm3 device */ +static const unsigned pwm3_pins[] = { 22 }; +static struct spear_muxreg pwm3_muxreg[] = { + { + .reg = PAD_SHARED_IP_EN_1, + .mask = GPT0_TMR1_CLK_MASK, + .val = 0, + }, { + .reg = PAD_FUNCTION_EN_1, + .mask = PWM3_AND_GPT0_TMR1_CLK_REG0_MASK, + .val = PWM3_AND_GPT0_TMR1_CLK_REG0_MASK, + }, +}; + +static struct spear_modemux pwm3_modemux[] = { + { + .muxregs = pwm3_muxreg, + .nmuxregs = ARRAY_SIZE(pwm3_muxreg), + }, +}; + +static struct spear_pingroup pwm3_pingroup = { + .name = "pwm3_grp", + .pins = pwm3_pins, + .npins = ARRAY_SIZE(pwm3_pins), + .modemuxs = pwm3_modemux, + .nmodemuxs = ARRAY_SIZE(pwm3_modemux), +}; + +static const char *const pwm_grps[] = { "pwm0_grp", "pwm1_grp", "pwm2_grp", + "pwm3_grp" }; +static struct spear_function pwm_function = { + .name = "pwm", + .groups = pwm_grps, + .ngroups = ARRAY_SIZE(pwm_grps), +}; + +/* pad multiplexing for vip_mux device */ +static const unsigned vip_mux_pins[] = { 35, 36, 37, 38, 40, 41, 42, 43 }; +static struct spear_muxreg vip_mux_muxreg[] = { + { + .reg = PAD_FUNCTION_EN_2, + .mask = VIP_REG1_MASK, + .val = VIP_REG1_MASK, + }, +}; + +static struct spear_modemux vip_mux_modemux[] = { + { + .muxregs = vip_mux_muxreg, + .nmuxregs = ARRAY_SIZE(vip_mux_muxreg), + }, +}; + +static struct spear_pingroup vip_mux_pingroup = { + .name = "vip_mux_grp", + .pins = vip_mux_pins, + .npins = ARRAY_SIZE(vip_mux_pins), + .modemuxs = vip_mux_modemux, + .nmodemuxs = ARRAY_SIZE(vip_mux_modemux), +}; + +/* pad multiplexing for vip_mux_cam0 (disables cam0) device */ +static const unsigned vip_mux_cam0_pins[] = { 65, 66, 67, 68, 69, 70, 71, 72, + 73, 74, 75 }; +static struct spear_muxreg vip_mux_cam0_muxreg[] = { + { + .reg = PAD_SHARED_IP_EN_1, + .mask = CAM0_MASK, + .val = 0, + }, { + .reg = PAD_FUNCTION_EN_3, + .mask = VIP_AND_CAM0_REG2_MASK, + .val = VIP_AND_CAM0_REG2_MASK, + }, +}; + +static struct spear_modemux vip_mux_cam0_modemux[] = { + { + .muxregs = vip_mux_cam0_muxreg, + .nmuxregs = ARRAY_SIZE(vip_mux_cam0_muxreg), + }, +}; + +static struct spear_pingroup vip_mux_cam0_pingroup = { + .name = "vip_mux_cam0_grp", + .pins = vip_mux_cam0_pins, + .npins = ARRAY_SIZE(vip_mux_cam0_pins), + .modemuxs = vip_mux_cam0_modemux, + .nmodemuxs = ARRAY_SIZE(vip_mux_cam0_modemux), +}; + +/* pad multiplexing for vip_mux_cam1 (disables cam1) device */ +static const unsigned vip_mux_cam1_pins[] = { 54, 55, 56, 57, 58, 59, 60, 61, + 62, 63, 64 }; +static struct spear_muxreg vip_mux_cam1_muxreg[] = { + { + .reg = PAD_SHARED_IP_EN_1, + .mask = CAM1_MASK, + .val = 0, + }, { + .reg = PAD_FUNCTION_EN_2, + .mask = VIP_AND_CAM1_REG1_MASK, + .val = VIP_AND_CAM1_REG1_MASK, + }, { + .reg = PAD_FUNCTION_EN_3, + .mask = VIP_AND_CAM1_REG2_MASK, + .val = VIP_AND_CAM1_REG2_MASK, + }, +}; + +static struct spear_modemux vip_mux_cam1_modemux[] = { + { + .muxregs = vip_mux_cam1_muxreg, + .nmuxregs = ARRAY_SIZE(vip_mux_cam1_muxreg), + }, +}; + +static struct spear_pingroup vip_mux_cam1_pingroup = { + .name = "vip_mux_cam1_grp", + .pins = vip_mux_cam1_pins, + .npins = ARRAY_SIZE(vip_mux_cam1_pins), + .modemuxs = vip_mux_cam1_modemux, + .nmodemuxs = ARRAY_SIZE(vip_mux_cam1_modemux), +}; + +/* pad multiplexing for vip_mux_cam2 (disables cam2) device */ +static const unsigned vip_mux_cam2_pins[] = { 39, 44, 45, 46, 47, 48, 49, 50, + 51, 52, 53 }; +static struct spear_muxreg vip_mux_cam2_muxreg[] = { + { + .reg = PAD_SHARED_IP_EN_1, + .mask = CAM2_MASK, + .val = 0, + }, { + .reg = PAD_FUNCTION_EN_2, + .mask = VIP_AND_CAM2_REG1_MASK, + .val = VIP_AND_CAM2_REG1_MASK, + }, +}; + +static struct spear_modemux vip_mux_cam2_modemux[] = { + { + .muxregs = vip_mux_cam2_muxreg, + .nmuxregs = ARRAY_SIZE(vip_mux_cam2_muxreg), + }, +}; + +static struct spear_pingroup vip_mux_cam2_pingroup = { + .name = "vip_mux_cam2_grp", + .pins = vip_mux_cam2_pins, + .npins = ARRAY_SIZE(vip_mux_cam2_pins), + .modemuxs = vip_mux_cam2_modemux, + .nmodemuxs = ARRAY_SIZE(vip_mux_cam2_modemux), +}; + +/* pad multiplexing for vip_mux_cam3 (disables cam3) device */ +static const unsigned vip_mux_cam3_pins[] = { 20, 25, 26, 27, 28, 29, 30, 31, + 32, 33, 34 }; +static struct spear_muxreg vip_mux_cam3_muxreg[] = { + { + .reg = PAD_SHARED_IP_EN_1, + .mask = CAM3_MASK, + .val = 0, + }, { + .reg = PAD_FUNCTION_EN_1, + .mask = VIP_AND_CAM3_REG0_MASK, + .val = VIP_AND_CAM3_REG0_MASK, + }, { + .reg = PAD_FUNCTION_EN_2, + .mask = VIP_AND_CAM3_REG1_MASK, + .val = VIP_AND_CAM3_REG1_MASK, + }, +}; + +static struct spear_modemux vip_mux_cam3_modemux[] = { + { + .muxregs = vip_mux_cam3_muxreg, + .nmuxregs = ARRAY_SIZE(vip_mux_cam3_muxreg), + }, +}; + +static struct spear_pingroup vip_mux_cam3_pingroup = { + .name = "vip_mux_cam3_grp", + .pins = vip_mux_cam3_pins, + .npins = ARRAY_SIZE(vip_mux_cam3_pins), + .modemuxs = vip_mux_cam3_modemux, + .nmodemuxs = ARRAY_SIZE(vip_mux_cam3_modemux), +}; + +static const char *const vip_grps[] = { "vip_mux_grp", "vip_mux_cam0_grp" , + "vip_mux_cam1_grp" , "vip_mux_cam2_grp", "vip_mux_cam3_grp" }; +static struct spear_function vip_function = { + .name = "vip", + .groups = vip_grps, + .ngroups = ARRAY_SIZE(vip_grps), +}; + +/* pad multiplexing for cam0 device */ +static const unsigned cam0_pins[] = { 65, 66, 67, 68, 69, 70, 71, 72, 73, 74, 75 +}; +static struct spear_muxreg cam0_muxreg[] = { + { + .reg = PAD_SHARED_IP_EN_1, + .mask = CAM0_MASK, + .val = CAM0_MASK, + }, { + .reg = PAD_FUNCTION_EN_3, + .mask = VIP_AND_CAM0_REG2_MASK, + .val = VIP_AND_CAM0_REG2_MASK, + }, +}; + +static struct spear_modemux cam0_modemux[] = { + { + .muxregs = cam0_muxreg, + .nmuxregs = ARRAY_SIZE(cam0_muxreg), + }, +}; + +static struct spear_pingroup cam0_pingroup = { + .name = "cam0_grp", + .pins = cam0_pins, + .npins = ARRAY_SIZE(cam0_pins), + .modemuxs = cam0_modemux, + .nmodemuxs = ARRAY_SIZE(cam0_modemux), +}; + +static const char *const cam0_grps[] = { "cam0_grp" }; +static struct spear_function cam0_function = { + .name = "cam0", + .groups = cam0_grps, + .ngroups = ARRAY_SIZE(cam0_grps), +}; + +/* pad multiplexing for cam1 device */ +static const unsigned cam1_pins[] = { 54, 55, 56, 57, 58, 59, 60, 61, 62, 63, 64 +}; +static struct spear_muxreg cam1_muxreg[] = { + { + .reg = PAD_SHARED_IP_EN_1, + .mask = CAM1_MASK, + .val = CAM1_MASK, + }, { + .reg = PAD_FUNCTION_EN_2, + .mask = VIP_AND_CAM1_REG1_MASK, + .val = VIP_AND_CAM1_REG1_MASK, + }, { + .reg = PAD_FUNCTION_EN_3, + .mask = VIP_AND_CAM1_REG2_MASK, + .val = VIP_AND_CAM1_REG2_MASK, + }, +}; + +static struct spear_modemux cam1_modemux[] = { + { + .muxregs = cam1_muxreg, + .nmuxregs = ARRAY_SIZE(cam1_muxreg), + }, +}; + +static struct spear_pingroup cam1_pingroup = { + .name = "cam1_grp", + .pins = cam1_pins, + .npins = ARRAY_SIZE(cam1_pins), + .modemuxs = cam1_modemux, + .nmodemuxs = ARRAY_SIZE(cam1_modemux), +}; + +static const char *const cam1_grps[] = { "cam1_grp" }; +static struct spear_function cam1_function = { + .name = "cam1", + .groups = cam1_grps, + .ngroups = ARRAY_SIZE(cam1_grps), +}; + +/* pad multiplexing for cam2 device */ +static const unsigned cam2_pins[] = { 39, 44, 45, 46, 47, 48, 49, 50, 51, 52, 53 +}; +static struct spear_muxreg cam2_muxreg[] = { + { + .reg = PAD_SHARED_IP_EN_1, + .mask = CAM2_MASK, + .val = CAM2_MASK, + }, { + .reg = PAD_FUNCTION_EN_2, + .mask = VIP_AND_CAM2_REG1_MASK, + .val = VIP_AND_CAM2_REG1_MASK, + }, +}; + +static struct spear_modemux cam2_modemux[] = { + { + .muxregs = cam2_muxreg, + .nmuxregs = ARRAY_SIZE(cam2_muxreg), + }, +}; + +static struct spear_pingroup cam2_pingroup = { + .name = "cam2_grp", + .pins = cam2_pins, + .npins = ARRAY_SIZE(cam2_pins), + .modemuxs = cam2_modemux, + .nmodemuxs = ARRAY_SIZE(cam2_modemux), +}; + +static const char *const cam2_grps[] = { "cam2_grp" }; +static struct spear_function cam2_function = { + .name = "cam2", + .groups = cam2_grps, + .ngroups = ARRAY_SIZE(cam2_grps), +}; + +/* pad multiplexing for cam3 device */ +static const unsigned cam3_pins[] = { 20, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34 +}; +static struct spear_muxreg cam3_muxreg[] = { + { + .reg = PAD_SHARED_IP_EN_1, + .mask = CAM3_MASK, + .val = CAM3_MASK, + }, { + .reg = PAD_FUNCTION_EN_1, + .mask = VIP_AND_CAM3_REG0_MASK, + .val = VIP_AND_CAM3_REG0_MASK, + }, { + .reg = PAD_FUNCTION_EN_2, + .mask = VIP_AND_CAM3_REG1_MASK, + .val = VIP_AND_CAM3_REG1_MASK, + }, +}; + +static struct spear_modemux cam3_modemux[] = { + { + .muxregs = cam3_muxreg, + .nmuxregs = ARRAY_SIZE(cam3_muxreg), + }, +}; + +static struct spear_pingroup cam3_pingroup = { + .name = "cam3_grp", + .pins = cam3_pins, + .npins = ARRAY_SIZE(cam3_pins), + .modemuxs = cam3_modemux, + .nmodemuxs = ARRAY_SIZE(cam3_modemux), +}; + +static const char *const cam3_grps[] = { "cam3_grp" }; +static struct spear_function cam3_function = { + .name = "cam3", + .groups = cam3_grps, + .ngroups = ARRAY_SIZE(cam3_grps), +}; + +/* pad multiplexing for smi device */ +static const unsigned smi_pins[] = { 76, 77, 78, 79, 84 }; +static struct spear_muxreg smi_muxreg[] = { + { + .reg = PAD_FUNCTION_EN_3, + .mask = SMI_REG2_MASK, + .val = SMI_REG2_MASK, + }, +}; + +static struct spear_modemux smi_modemux[] = { + { + .muxregs = smi_muxreg, + .nmuxregs = ARRAY_SIZE(smi_muxreg), + }, +}; + +static struct spear_pingroup smi_pingroup = { + .name = "smi_grp", + .pins = smi_pins, + .npins = ARRAY_SIZE(smi_pins), + .modemuxs = smi_modemux, + .nmodemuxs = ARRAY_SIZE(smi_modemux), +}; + +static const char *const smi_grps[] = { "smi_grp" }; +static struct spear_function smi_function = { + .name = "smi", + .groups = smi_grps, + .ngroups = ARRAY_SIZE(smi_grps), +}; + +/* pad multiplexing for ssp0 device */ +static const unsigned ssp0_pins[] = { 80, 81, 82, 83 }; +static struct spear_muxreg ssp0_muxreg[] = { + { + .reg = PAD_FUNCTION_EN_3, + .mask = SSP0_REG2_MASK, + .val = SSP0_REG2_MASK, + }, +}; + +static struct spear_modemux ssp0_modemux[] = { + { + .muxregs = ssp0_muxreg, + .nmuxregs = ARRAY_SIZE(ssp0_muxreg), + }, +}; + +static struct spear_pingroup ssp0_pingroup = { + .name = "ssp0_grp", + .pins = ssp0_pins, + .npins = ARRAY_SIZE(ssp0_pins), + .modemuxs = ssp0_modemux, + .nmodemuxs = ARRAY_SIZE(ssp0_modemux), +}; + +/* pad multiplexing for ssp0_cs1 device */ +static const unsigned ssp0_cs1_pins[] = { 24 }; +static struct spear_muxreg ssp0_cs1_muxreg[] = { + { + .reg = PAD_SHARED_IP_EN_1, + .mask = SSP0_CS1_MASK, + .val = SSP0_CS1_MASK, + }, { + .reg = PAD_FUNCTION_EN_1, + .mask = PWM0_AND_SSP0_CS1_REG0_MASK, + .val = PWM0_AND_SSP0_CS1_REG0_MASK, + }, +}; + +static struct spear_modemux ssp0_cs1_modemux[] = { + { + .muxregs = ssp0_cs1_muxreg, + .nmuxregs = ARRAY_SIZE(ssp0_cs1_muxreg), + }, +}; + +static struct spear_pingroup ssp0_cs1_pingroup = { + .name = "ssp0_cs1_grp", + .pins = ssp0_cs1_pins, + .npins = ARRAY_SIZE(ssp0_cs1_pins), + .modemuxs = ssp0_cs1_modemux, + .nmodemuxs = ARRAY_SIZE(ssp0_cs1_modemux), +}; + +/* pad multiplexing for ssp0_cs2 device */ +static const unsigned ssp0_cs2_pins[] = { 85 }; +static struct spear_muxreg ssp0_cs2_muxreg[] = { + { + .reg = PAD_SHARED_IP_EN_1, + .mask = SSP0_CS2_MASK, + .val = SSP0_CS2_MASK, + }, { + .reg = PAD_FUNCTION_EN_3, + .mask = TS_AND_SSP0_CS2_REG2_MASK, + .val = TS_AND_SSP0_CS2_REG2_MASK, + }, +}; + +static struct spear_modemux ssp0_cs2_modemux[] = { + { + .muxregs = ssp0_cs2_muxreg, + .nmuxregs = ARRAY_SIZE(ssp0_cs2_muxreg), + }, +}; + +static struct spear_pingroup ssp0_cs2_pingroup = { + .name = "ssp0_cs2_grp", + .pins = ssp0_cs2_pins, + .npins = ARRAY_SIZE(ssp0_cs2_pins), + .modemuxs = ssp0_cs2_modemux, + .nmodemuxs = ARRAY_SIZE(ssp0_cs2_modemux), +}; + +/* pad multiplexing for ssp0_cs3 device */ +static const unsigned ssp0_cs3_pins[] = { 132 }; +static struct spear_muxreg ssp0_cs3_muxreg[] = { + { + .reg = PAD_FUNCTION_EN_5, + .mask = SSP0_CS3_REG4_MASK, + .val = SSP0_CS3_REG4_MASK, + }, +}; + +static struct spear_modemux ssp0_cs3_modemux[] = { + { + .muxregs = ssp0_cs3_muxreg, + .nmuxregs = ARRAY_SIZE(ssp0_cs3_muxreg), + }, +}; + +static struct spear_pingroup ssp0_cs3_pingroup = { + .name = "ssp0_cs3_grp", + .pins = ssp0_cs3_pins, + .npins = ARRAY_SIZE(ssp0_cs3_pins), + .modemuxs = ssp0_cs3_modemux, + .nmodemuxs = ARRAY_SIZE(ssp0_cs3_modemux), +}; + +static const char *const ssp0_grps[] = { "ssp0_grp", "ssp0_cs1_grp", + "ssp0_cs2_grp", "ssp0_cs3_grp" }; +static struct spear_function ssp0_function = { + .name = "ssp0", + .groups = ssp0_grps, + .ngroups = ARRAY_SIZE(ssp0_grps), +}; + +/* pad multiplexing for uart0 device */ +static const unsigned uart0_pins[] = { 86, 87 }; +static struct spear_muxreg uart0_muxreg[] = { + { + .reg = PAD_FUNCTION_EN_3, + .mask = UART0_REG2_MASK, + .val = UART0_REG2_MASK, + }, +}; + +static struct spear_modemux uart0_modemux[] = { + { + .muxregs = uart0_muxreg, + .nmuxregs = ARRAY_SIZE(uart0_muxreg), + }, +}; + +static struct spear_pingroup uart0_pingroup = { + .name = "uart0_grp", + .pins = uart0_pins, + .npins = ARRAY_SIZE(uart0_pins), + .modemuxs = uart0_modemux, + .nmodemuxs = ARRAY_SIZE(uart0_modemux), +}; + +/* pad multiplexing for uart0_enh device */ +static const unsigned uart0_enh_pins[] = { 11, 12, 13, 14, 15, 16 }; +static struct spear_muxreg uart0_enh_muxreg[] = { + { + .reg = PAD_SHARED_IP_EN_1, + .mask = GPT_MASK, + .val = 0, + }, { + .reg = PAD_FUNCTION_EN_1, + .mask = UART0_ENH_AND_GPT_REG0_MASK, + .val = UART0_ENH_AND_GPT_REG0_MASK, + }, +}; + +static struct spear_modemux uart0_enh_modemux[] = { + { + .muxregs = uart0_enh_muxreg, + .nmuxregs = ARRAY_SIZE(uart0_enh_muxreg), + }, +}; + +static struct spear_pingroup uart0_enh_pingroup = { + .name = "uart0_enh_grp", + .pins = uart0_enh_pins, + .npins = ARRAY_SIZE(uart0_enh_pins), + .modemuxs = uart0_enh_modemux, + .nmodemuxs = ARRAY_SIZE(uart0_enh_modemux), +}; + +static const char *const uart0_grps[] = { "uart0_grp", "uart0_enh_grp" }; +static struct spear_function uart0_function = { + .name = "uart0", + .groups = uart0_grps, + .ngroups = ARRAY_SIZE(uart0_grps), +}; + +/* pad multiplexing for uart1 device */ +static const unsigned uart1_pins[] = { 88, 89 }; +static struct spear_muxreg uart1_muxreg[] = { + { + .reg = PAD_FUNCTION_EN_3, + .mask = UART1_REG2_MASK, + .val = UART1_REG2_MASK, + }, +}; + +static struct spear_modemux uart1_modemux[] = { + { + .muxregs = uart1_muxreg, + .nmuxregs = ARRAY_SIZE(uart1_muxreg), + }, +}; + +static struct spear_pingroup uart1_pingroup = { + .name = "uart1_grp", + .pins = uart1_pins, + .npins = ARRAY_SIZE(uart1_pins), + .modemuxs = uart1_modemux, + .nmodemuxs = ARRAY_SIZE(uart1_modemux), +}; + +static const char *const uart1_grps[] = { "uart1_grp" }; +static struct spear_function uart1_function = { + .name = "uart1", + .groups = uart1_grps, + .ngroups = ARRAY_SIZE(uart1_grps), +}; + +/* pad multiplexing for i2s_in device */ +static const unsigned i2s_in_pins[] = { 90, 91, 92, 93, 94, 99 }; +static struct spear_muxreg i2s_in_muxreg[] = { + { + .reg = PAD_FUNCTION_EN_3, + .mask = I2S_IN_REG2_MASK, + .val = I2S_IN_REG2_MASK, + }, { + .reg = PAD_FUNCTION_EN_4, + .mask = I2S_IN_REG3_MASK, + .val = I2S_IN_REG3_MASK, + }, +}; + +static struct spear_modemux i2s_in_modemux[] = { + { + .muxregs = i2s_in_muxreg, + .nmuxregs = ARRAY_SIZE(i2s_in_muxreg), + }, +}; + +static struct spear_pingroup i2s_in_pingroup = { + .name = "i2s_in_grp", + .pins = i2s_in_pins, + .npins = ARRAY_SIZE(i2s_in_pins), + .modemuxs = i2s_in_modemux, + .nmodemuxs = ARRAY_SIZE(i2s_in_modemux), +}; + +/* pad multiplexing for i2s_out device */ +static const unsigned i2s_out_pins[] = { 95, 96, 97, 98, 100, 101, 102, 103 }; +static struct spear_muxreg i2s_out_muxreg[] = { + { + .reg = PAD_FUNCTION_EN_4, + .mask = I2S_OUT_REG3_MASK, + .val = I2S_OUT_REG3_MASK, + }, +}; + +static struct spear_modemux i2s_out_modemux[] = { + { + .muxregs = i2s_out_muxreg, + .nmuxregs = ARRAY_SIZE(i2s_out_muxreg), + }, +}; + +static struct spear_pingroup i2s_out_pingroup = { + .name = "i2s_out_grp", + .pins = i2s_out_pins, + .npins = ARRAY_SIZE(i2s_out_pins), + .modemuxs = i2s_out_modemux, + .nmodemuxs = ARRAY_SIZE(i2s_out_modemux), +}; + +static const char *const i2s_grps[] = { "i2s_in_grp", "i2s_out_grp" }; +static struct spear_function i2s_function = { + .name = "i2s", + .groups = i2s_grps, + .ngroups = ARRAY_SIZE(i2s_grps), +}; + +/* pad multiplexing for gmac device */ +static const unsigned gmac_pins[] = { 104, 105, 106, 107, 108, 109, 110, 111, + 112, 113, 114, 115, 116, 117, 118, 119, 120, 121, 122, 123, 124, 125, + 126, 127, 128, 129, 130, 131 }; +#define GMAC_MUXREG \ + { \ + .reg = PAD_FUNCTION_EN_4, \ + .mask = GMAC_REG3_MASK, \ + .val = GMAC_REG3_MASK, \ + }, { \ + .reg = PAD_FUNCTION_EN_5, \ + .mask = GMAC_REG4_MASK, \ + .val = GMAC_REG4_MASK, \ + } + +/* pad multiplexing for gmii device */ +static struct spear_muxreg gmii_muxreg[] = { + GMAC_MUXREG, + { + .reg = GMAC_CLK_CFG, + .mask = GMAC_PHY_IF_SEL_MASK, + .val = GMAC_PHY_IF_GMII_VAL, + }, +}; + +static struct spear_modemux gmii_modemux[] = { + { + .muxregs = gmii_muxreg, + .nmuxregs = ARRAY_SIZE(gmii_muxreg), + }, +}; + +static struct spear_pingroup gmii_pingroup = { + .name = "gmii_grp", + .pins = gmac_pins, + .npins = ARRAY_SIZE(gmac_pins), + .modemuxs = gmii_modemux, + .nmodemuxs = ARRAY_SIZE(gmii_modemux), +}; + +/* pad multiplexing for rgmii device */ +static struct spear_muxreg rgmii_muxreg[] = { + GMAC_MUXREG, + { + .reg = GMAC_CLK_CFG, + .mask = GMAC_PHY_IF_SEL_MASK, + .val = GMAC_PHY_IF_RGMII_VAL, + }, +}; + +static struct spear_modemux rgmii_modemux[] = { + { + .muxregs = rgmii_muxreg, + .nmuxregs = ARRAY_SIZE(rgmii_muxreg), + }, +}; + +static struct spear_pingroup rgmii_pingroup = { + .name = "rgmii_grp", + .pins = gmac_pins, + .npins = ARRAY_SIZE(gmac_pins), + .modemuxs = rgmii_modemux, + .nmodemuxs = ARRAY_SIZE(rgmii_modemux), +}; + +/* pad multiplexing for rmii device */ +static struct spear_muxreg rmii_muxreg[] = { + GMAC_MUXREG, + { + .reg = GMAC_CLK_CFG, + .mask = GMAC_PHY_IF_SEL_MASK, + .val = GMAC_PHY_IF_RMII_VAL, + }, +}; + +static struct spear_modemux rmii_modemux[] = { + { + .muxregs = rmii_muxreg, + .nmuxregs = ARRAY_SIZE(rmii_muxreg), + }, +}; + +static struct spear_pingroup rmii_pingroup = { + .name = "rmii_grp", + .pins = gmac_pins, + .npins = ARRAY_SIZE(gmac_pins), + .modemuxs = rmii_modemux, + .nmodemuxs = ARRAY_SIZE(rmii_modemux), +}; + +/* pad multiplexing for sgmii device */ +static struct spear_muxreg sgmii_muxreg[] = { + GMAC_MUXREG, + { + .reg = GMAC_CLK_CFG, + .mask = GMAC_PHY_IF_SEL_MASK, + .val = GMAC_PHY_IF_SGMII_VAL, + }, +}; + +static struct spear_modemux sgmii_modemux[] = { + { + .muxregs = sgmii_muxreg, + .nmuxregs = ARRAY_SIZE(sgmii_muxreg), + }, +}; + +static struct spear_pingroup sgmii_pingroup = { + .name = "sgmii_grp", + .pins = gmac_pins, + .npins = ARRAY_SIZE(gmac_pins), + .modemuxs = sgmii_modemux, + .nmodemuxs = ARRAY_SIZE(sgmii_modemux), +}; + +static const char *const gmac_grps[] = { "gmii_grp", "rgmii_grp", "rmii_grp", + "sgmii_grp" }; +static struct spear_function gmac_function = { + .name = "gmac", + .groups = gmac_grps, + .ngroups = ARRAY_SIZE(gmac_grps), +}; + +/* pad multiplexing for i2c0 device */ +static const unsigned i2c0_pins[] = { 133, 134 }; +static struct spear_muxreg i2c0_muxreg[] = { + { + .reg = PAD_FUNCTION_EN_5, + .mask = I2C0_REG4_MASK, + .val = I2C0_REG4_MASK, + }, +}; + +static struct spear_modemux i2c0_modemux[] = { + { + .muxregs = i2c0_muxreg, + .nmuxregs = ARRAY_SIZE(i2c0_muxreg), + }, +}; + +static struct spear_pingroup i2c0_pingroup = { + .name = "i2c0_grp", + .pins = i2c0_pins, + .npins = ARRAY_SIZE(i2c0_pins), + .modemuxs = i2c0_modemux, + .nmodemuxs = ARRAY_SIZE(i2c0_modemux), +}; + +static const char *const i2c0_grps[] = { "i2c0_grp" }; +static struct spear_function i2c0_function = { + .name = "i2c0", + .groups = i2c0_grps, + .ngroups = ARRAY_SIZE(i2c0_grps), +}; + +/* pad multiplexing for i2c1 device */ +static const unsigned i2c1_pins[] = { 18, 23 }; +static struct spear_muxreg i2c1_muxreg[] = { + { + .reg = PAD_FUNCTION_EN_1, + .mask = I2C1_REG0_MASK, + .val = I2C1_REG0_MASK, + }, +}; + +static struct spear_modemux i2c1_modemux[] = { + { + .muxregs = i2c1_muxreg, + .nmuxregs = ARRAY_SIZE(i2c1_muxreg), + }, +}; + +static struct spear_pingroup i2c1_pingroup = { + .name = "i2c1_grp", + .pins = i2c1_pins, + .npins = ARRAY_SIZE(i2c1_pins), + .modemuxs = i2c1_modemux, + .nmodemuxs = ARRAY_SIZE(i2c1_modemux), +}; + +static const char *const i2c1_grps[] = { "i2c1_grp" }; +static struct spear_function i2c1_function = { + .name = "i2c1", + .groups = i2c1_grps, + .ngroups = ARRAY_SIZE(i2c1_grps), +}; + +/* pad multiplexing for cec0 device */ +static const unsigned cec0_pins[] = { 135 }; +static struct spear_muxreg cec0_muxreg[] = { + { + .reg = PAD_FUNCTION_EN_5, + .mask = CEC0_REG4_MASK, + .val = CEC0_REG4_MASK, + }, +}; + +static struct spear_modemux cec0_modemux[] = { + { + .muxregs = cec0_muxreg, + .nmuxregs = ARRAY_SIZE(cec0_muxreg), + }, +}; + +static struct spear_pingroup cec0_pingroup = { + .name = "cec0_grp", + .pins = cec0_pins, + .npins = ARRAY_SIZE(cec0_pins), + .modemuxs = cec0_modemux, + .nmodemuxs = ARRAY_SIZE(cec0_modemux), +}; + +static const char *const cec0_grps[] = { "cec0_grp" }; +static struct spear_function cec0_function = { + .name = "cec0", + .groups = cec0_grps, + .ngroups = ARRAY_SIZE(cec0_grps), +}; + +/* pad multiplexing for cec1 device */ +static const unsigned cec1_pins[] = { 136 }; +static struct spear_muxreg cec1_muxreg[] = { + { + .reg = PAD_FUNCTION_EN_5, + .mask = CEC1_REG4_MASK, + .val = CEC1_REG4_MASK, + }, +}; + +static struct spear_modemux cec1_modemux[] = { + { + .muxregs = cec1_muxreg, + .nmuxregs = ARRAY_SIZE(cec1_muxreg), + }, +}; + +static struct spear_pingroup cec1_pingroup = { + .name = "cec1_grp", + .pins = cec1_pins, + .npins = ARRAY_SIZE(cec1_pins), + .modemuxs = cec1_modemux, + .nmodemuxs = ARRAY_SIZE(cec1_modemux), +}; + +static const char *const cec1_grps[] = { "cec1_grp" }; +static struct spear_function cec1_function = { + .name = "cec1", + .groups = cec1_grps, + .ngroups = ARRAY_SIZE(cec1_grps), +}; + +/* pad multiplexing for mcif devices */ +static const unsigned mcif_pins[] = { 193, 194, 195, 196, 197, 198, 199, 200, + 201, 202, 203, 204, 205, 206, 207, 208, 209, 210, 211, 212, 213, 214, + 215, 216, 217, 218, 219, 220, 221, 222, 223, 224, 225, 226, 227, 228, + 229, 230, 231, 232, 237 }; +#define MCIF_MUXREG \ + { \ + .reg = PAD_SHARED_IP_EN_1, \ + .mask = MCIF_MASK, \ + .val = MCIF_MASK, \ + }, { \ + .reg = PAD_FUNCTION_EN_7, \ + .mask = FSMC_PNOR_AND_MCIF_REG6_MASK | MCIF_REG6_MASK, \ + .val = FSMC_PNOR_AND_MCIF_REG6_MASK | MCIF_REG6_MASK, \ + }, { \ + .reg = PAD_FUNCTION_EN_8, \ + .mask = MCIF_REG7_MASK, \ + .val = MCIF_REG7_MASK, \ + } + +/* Pad multiplexing for sdhci device */ +static struct spear_muxreg sdhci_muxreg[] = { + MCIF_MUXREG, + { + .reg = PERIP_CFG, + .mask = MCIF_SEL_MASK, + .val = MCIF_SEL_SD, + }, +}; + +static struct spear_modemux sdhci_modemux[] = { + { + .muxregs = sdhci_muxreg, + .nmuxregs = ARRAY_SIZE(sdhci_muxreg), + }, +}; + +static struct spear_pingroup sdhci_pingroup = { + .name = "sdhci_grp", + .pins = mcif_pins, + .npins = ARRAY_SIZE(mcif_pins), + .modemuxs = sdhci_modemux, + .nmodemuxs = ARRAY_SIZE(sdhci_modemux), +}; + +static const char *const sdhci_grps[] = { "sdhci_grp" }; +static struct spear_function sdhci_function = { + .name = "sdhci", + .groups = sdhci_grps, + .ngroups = ARRAY_SIZE(sdhci_grps), +}; + +/* Pad multiplexing for cf device */ +static struct spear_muxreg cf_muxreg[] = { + MCIF_MUXREG, + { + .reg = PERIP_CFG, + .mask = MCIF_SEL_MASK, + .val = MCIF_SEL_CF, + }, +}; + +static struct spear_modemux cf_modemux[] = { + { + .muxregs = cf_muxreg, + .nmuxregs = ARRAY_SIZE(cf_muxreg), + }, +}; + +static struct spear_pingroup cf_pingroup = { + .name = "cf_grp", + .pins = mcif_pins, + .npins = ARRAY_SIZE(mcif_pins), + .modemuxs = cf_modemux, + .nmodemuxs = ARRAY_SIZE(cf_modemux), +}; + +static const char *const cf_grps[] = { "cf_grp" }; +static struct spear_function cf_function = { + .name = "cf", + .groups = cf_grps, + .ngroups = ARRAY_SIZE(cf_grps), +}; + +/* Pad multiplexing for xd device */ +static struct spear_muxreg xd_muxreg[] = { + MCIF_MUXREG, + { + .reg = PERIP_CFG, + .mask = MCIF_SEL_MASK, + .val = MCIF_SEL_XD, + }, +}; + +static struct spear_modemux xd_modemux[] = { + { + .muxregs = xd_muxreg, + .nmuxregs = ARRAY_SIZE(xd_muxreg), + }, +}; + +static struct spear_pingroup xd_pingroup = { + .name = "xd_grp", + .pins = mcif_pins, + .npins = ARRAY_SIZE(mcif_pins), + .modemuxs = xd_modemux, + .nmodemuxs = ARRAY_SIZE(xd_modemux), +}; + +static const char *const xd_grps[] = { "xd_grp" }; +static struct spear_function xd_function = { + .name = "xd", + .groups = xd_grps, + .ngroups = ARRAY_SIZE(xd_grps), +}; + +/* pad multiplexing for clcd device */ +static const unsigned clcd_pins[] = { 138, 139, 140, 141, 142, 143, 144, 145, + 146, 147, 148, 149, 150, 151, 152, 153, 154, 155, 156, 157, 158, 159, + 160, 161, 162, 163, 164, 165, 166, 167, 168, 169, 170, 171, 172, 173, + 174, 175, 176, 177, 178, 179, 180, 181, 182, 183, 184, 185, 186, 187, + 188, 189, 190, 191 }; +static struct spear_muxreg clcd_muxreg[] = { + { + .reg = PAD_SHARED_IP_EN_1, + .mask = ARM_TRACE_MASK | MIPHY_DBG_MASK, + .val = 0, + }, { + .reg = PAD_FUNCTION_EN_5, + .mask = CLCD_REG4_MASK | CLCD_AND_ARM_TRACE_REG4_MASK, + .val = CLCD_REG4_MASK | CLCD_AND_ARM_TRACE_REG4_MASK, + }, { + .reg = PAD_FUNCTION_EN_6, + .mask = CLCD_AND_ARM_TRACE_REG5_MASK, + .val = CLCD_AND_ARM_TRACE_REG5_MASK, + }, { + .reg = PAD_FUNCTION_EN_7, + .mask = CLCD_AND_ARM_TRACE_REG6_MASK, + .val = CLCD_AND_ARM_TRACE_REG6_MASK, + }, +}; + +static struct spear_modemux clcd_modemux[] = { + { + .muxregs = clcd_muxreg, + .nmuxregs = ARRAY_SIZE(clcd_muxreg), + }, +}; + +static struct spear_pingroup clcd_pingroup = { + .name = "clcd_grp", + .pins = clcd_pins, + .npins = ARRAY_SIZE(clcd_pins), + .modemuxs = clcd_modemux, + .nmodemuxs = ARRAY_SIZE(clcd_modemux), +}; + +static const char *const clcd_grps[] = { "clcd_grp" }; +static struct spear_function clcd_function = { + .name = "clcd", + .groups = clcd_grps, + .ngroups = ARRAY_SIZE(clcd_grps), +}; + +/* pad multiplexing for arm_trace device */ +static const unsigned arm_trace_pins[] = { 158, 159, 160, 161, 162, 163, 164, + 165, 166, 167, 168, 169, 170, 171, 172, 173, 174, 175, 176, 177, 178, + 179, 180, 181, 182, 183, 184, 185, 186, 187, 188, 189, 190, 191, 192, + 193, 194, 195, 196, 197, 198, 199, 200 }; +static struct spear_muxreg arm_trace_muxreg[] = { + { + .reg = PAD_SHARED_IP_EN_1, + .mask = ARM_TRACE_MASK, + .val = ARM_TRACE_MASK, + }, { + .reg = PAD_FUNCTION_EN_5, + .mask = CLCD_AND_ARM_TRACE_REG4_MASK, + .val = CLCD_AND_ARM_TRACE_REG4_MASK, + }, { + .reg = PAD_FUNCTION_EN_6, + .mask = CLCD_AND_ARM_TRACE_REG5_MASK, + .val = CLCD_AND_ARM_TRACE_REG5_MASK, + }, { + .reg = PAD_FUNCTION_EN_7, + .mask = CLCD_AND_ARM_TRACE_REG6_MASK, + .val = CLCD_AND_ARM_TRACE_REG6_MASK, + }, +}; + +static struct spear_modemux arm_trace_modemux[] = { + { + .muxregs = arm_trace_muxreg, + .nmuxregs = ARRAY_SIZE(arm_trace_muxreg), + }, +}; + +static struct spear_pingroup arm_trace_pingroup = { + .name = "arm_trace_grp", + .pins = arm_trace_pins, + .npins = ARRAY_SIZE(arm_trace_pins), + .modemuxs = arm_trace_modemux, + .nmodemuxs = ARRAY_SIZE(arm_trace_modemux), +}; + +static const char *const arm_trace_grps[] = { "arm_trace_grp" }; +static struct spear_function arm_trace_function = { + .name = "arm_trace", + .groups = arm_trace_grps, + .ngroups = ARRAY_SIZE(arm_trace_grps), +}; + +/* pad multiplexing for miphy_dbg device */ +static const unsigned miphy_dbg_pins[] = { 96, 97, 98, 99, 100, 101, 102, 103, + 132, 135, 136, 137, 138, 139, 140, 141, 142, 143, 144, 145, 146, 147, + 148, 149, 150, 151, 152, 153, 154, 155, 156, 157 }; +static struct spear_muxreg miphy_dbg_muxreg[] = { + { + .reg = PAD_SHARED_IP_EN_1, + .mask = MIPHY_DBG_MASK, + .val = MIPHY_DBG_MASK, + }, { + .reg = PAD_FUNCTION_EN_5, + .mask = DEVS_GRP_AND_MIPHY_DBG_REG4_MASK, + .val = DEVS_GRP_AND_MIPHY_DBG_REG4_MASK, + }, +}; + +static struct spear_modemux miphy_dbg_modemux[] = { + { + .muxregs = miphy_dbg_muxreg, + .nmuxregs = ARRAY_SIZE(miphy_dbg_muxreg), + }, +}; + +static struct spear_pingroup miphy_dbg_pingroup = { + .name = "miphy_dbg_grp", + .pins = miphy_dbg_pins, + .npins = ARRAY_SIZE(miphy_dbg_pins), + .modemuxs = miphy_dbg_modemux, + .nmodemuxs = ARRAY_SIZE(miphy_dbg_modemux), +}; + +static const char *const miphy_dbg_grps[] = { "miphy_dbg_grp" }; +static struct spear_function miphy_dbg_function = { + .name = "miphy_dbg", + .groups = miphy_dbg_grps, + .ngroups = ARRAY_SIZE(miphy_dbg_grps), +}; + +/* pad multiplexing for pcie device */ +static const unsigned pcie_pins[] = { 250 }; +static struct spear_muxreg pcie_muxreg[] = { + { + .reg = PCIE_SATA_CFG, + .mask = SATA_PCIE_CFG_MASK, + .val = PCIE_CFG_VAL, + }, +}; + +static struct spear_modemux pcie_modemux[] = { + { + .muxregs = pcie_muxreg, + .nmuxregs = ARRAY_SIZE(pcie_muxreg), + }, +}; + +static struct spear_pingroup pcie_pingroup = { + .name = "pcie_grp", + .pins = pcie_pins, + .npins = ARRAY_SIZE(pcie_pins), + .modemuxs = pcie_modemux, + .nmodemuxs = ARRAY_SIZE(pcie_modemux), +}; + +static const char *const pcie_grps[] = { "pcie_grp" }; +static struct spear_function pcie_function = { + .name = "pcie", + .groups = pcie_grps, + .ngroups = ARRAY_SIZE(pcie_grps), +}; + +/* pad multiplexing for sata device */ +static const unsigned sata_pins[] = { 250 }; +static struct spear_muxreg sata_muxreg[] = { + { + .reg = PCIE_SATA_CFG, + .mask = SATA_PCIE_CFG_MASK, + .val = SATA_CFG_VAL, + }, +}; + +static struct spear_modemux sata_modemux[] = { + { + .muxregs = sata_muxreg, + .nmuxregs = ARRAY_SIZE(sata_muxreg), + }, +}; + +static struct spear_pingroup sata_pingroup = { + .name = "sata_grp", + .pins = sata_pins, + .npins = ARRAY_SIZE(sata_pins), + .modemuxs = sata_modemux, + .nmodemuxs = ARRAY_SIZE(sata_modemux), +}; + +static const char *const sata_grps[] = { "sata_grp" }; +static struct spear_function sata_function = { + .name = "sata", + .groups = sata_grps, + .ngroups = ARRAY_SIZE(sata_grps), +}; + +/* pingroups */ +static struct spear_pingroup *spear1340_pingroups[] = { + &pads_as_gpio_pingroup, + &fsmc_8bit_pingroup, + &fsmc_16bit_pingroup, + &fsmc_pnor_pingroup, + &keyboard_row_col_pingroup, + &keyboard_col5_pingroup, + &spdif_in_pingroup, + &spdif_out_pingroup, + &gpt_0_1_pingroup, + &pwm0_pingroup, + &pwm1_pingroup, + &pwm2_pingroup, + &pwm3_pingroup, + &vip_mux_pingroup, + &vip_mux_cam0_pingroup, + &vip_mux_cam1_pingroup, + &vip_mux_cam2_pingroup, + &vip_mux_cam3_pingroup, + &cam0_pingroup, + &cam1_pingroup, + &cam2_pingroup, + &cam3_pingroup, + &smi_pingroup, + &ssp0_pingroup, + &ssp0_cs1_pingroup, + &ssp0_cs2_pingroup, + &ssp0_cs3_pingroup, + &uart0_pingroup, + &uart0_enh_pingroup, + &uart1_pingroup, + &i2s_in_pingroup, + &i2s_out_pingroup, + &gmii_pingroup, + &rgmii_pingroup, + &rmii_pingroup, + &sgmii_pingroup, + &i2c0_pingroup, + &i2c1_pingroup, + &cec0_pingroup, + &cec1_pingroup, + &sdhci_pingroup, + &cf_pingroup, + &xd_pingroup, + &clcd_pingroup, + &arm_trace_pingroup, + &miphy_dbg_pingroup, + &pcie_pingroup, + &sata_pingroup, +}; + +/* functions */ +static struct spear_function *spear1340_functions[] = { + &pads_as_gpio_function, + &fsmc_function, + &keyboard_function, + &spdif_in_function, + &spdif_out_function, + &gpt_0_1_function, + &pwm_function, + &vip_function, + &cam0_function, + &cam1_function, + &cam2_function, + &cam3_function, + &smi_function, + &ssp0_function, + &uart0_function, + &uart1_function, + &i2s_function, + &gmac_function, + &i2c0_function, + &i2c1_function, + &cec0_function, + &cec1_function, + &sdhci_function, + &cf_function, + &xd_function, + &clcd_function, + &arm_trace_function, + &miphy_dbg_function, + &pcie_function, + &sata_function, +}; + +static struct spear_pinctrl_machdata spear1340_machdata = { + .pins = spear1340_pins, + .npins = ARRAY_SIZE(spear1340_pins), + .groups = spear1340_pingroups, + .ngroups = ARRAY_SIZE(spear1340_pingroups), + .functions = spear1340_functions, + .nfunctions = ARRAY_SIZE(spear1340_functions), + .modes_supported = false, +}; + +static struct of_device_id spear1340_pinctrl_of_match[] __devinitdata = { + { + .compatible = "st,spear1340-pinmux", + }, + {}, +}; + +static int __devinit spear1340_pinctrl_probe(struct platform_device *pdev) +{ + return spear_pinctrl_probe(pdev, &spear1340_machdata); +} + +static int __devexit spear1340_pinctrl_remove(struct platform_device *pdev) +{ + return spear_pinctrl_remove(pdev); +} + +static struct platform_driver spear1340_pinctrl_driver = { + .driver = { + .name = DRIVER_NAME, + .owner = THIS_MODULE, + .of_match_table = spear1340_pinctrl_of_match, + }, + .probe = spear1340_pinctrl_probe, + .remove = __devexit_p(spear1340_pinctrl_remove), +}; + +static int __init spear1340_pinctrl_init(void) +{ + return platform_driver_register(&spear1340_pinctrl_driver); +} +arch_initcall(spear1340_pinctrl_init); + +static void __exit spear1340_pinctrl_exit(void) +{ + platform_driver_unregister(&spear1340_pinctrl_driver); +} +module_exit(spear1340_pinctrl_exit); + +MODULE_AUTHOR("Viresh Kumar "); +MODULE_DESCRIPTION("ST Microelectronics SPEAr1340 pinctrl driver"); +MODULE_LICENSE("GPL v2"); +MODULE_DEVICE_TABLE(of, spear1340_pinctrl_of_match); -- cgit v1.2.3 From 07658d9a659ba2e297cead3872ad4be8ec38b5b9 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Mon, 16 Apr 2012 23:57:51 +0530 Subject: SPEAr13xx: Add dts and dtsi files This patch adds machines/boards dts{i} files for SPEAr1310 and SPEAr1340. Both are based on ARM, Cortex A9 processor family. Signed-off-by: Viresh Kumar --- arch/arm/boot/dts/spear1310-evb.dts | 292 ++++++++++++++++++++++++++++++++++ arch/arm/boot/dts/spear1310.dtsi | 184 +++++++++++++++++++++ arch/arm/boot/dts/spear1340-evb.dts | 308 ++++++++++++++++++++++++++++++++++++ arch/arm/boot/dts/spear1340.dtsi | 56 +++++++ arch/arm/boot/dts/spear13xx.dtsi | 262 ++++++++++++++++++++++++++++++ 5 files changed, 1102 insertions(+) create mode 100644 arch/arm/boot/dts/spear1310-evb.dts create mode 100644 arch/arm/boot/dts/spear1310.dtsi create mode 100644 arch/arm/boot/dts/spear1340-evb.dts create mode 100644 arch/arm/boot/dts/spear1340.dtsi create mode 100644 arch/arm/boot/dts/spear13xx.dtsi diff --git a/arch/arm/boot/dts/spear1310-evb.dts b/arch/arm/boot/dts/spear1310-evb.dts new file mode 100644 index 000000000000..8314e4171884 --- /dev/null +++ b/arch/arm/boot/dts/spear1310-evb.dts @@ -0,0 +1,292 @@ +/* + * DTS file for SPEAr1310 Evaluation Baord + * + * Copyright 2012 Viresh Kumar + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "spear1310.dtsi" + +/ { + model = "ST SPEAr1310 Evaluation Board"; + compatible = "st,spear1310-evb", "st,spear1310"; + #address-cells = <1>; + #size-cells = <1>; + + memory { + reg = <0 0x40000000>; + }; + + ahb { + pinmux@e0700000 { + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux { + i2c0-pmx { + st,pins = "i2c0_grp"; + st,function = "i2c0"; + }; + i2s1 { + st,pins = "i2s1_grp"; + st,function = "i2s1"; + }; + gpio { + st,pins = "arm_gpio_grp"; + st,function = "arm_gpio"; + }; + eth { + st,pins = "gmii_grp"; + st,function = "gmii"; + }; + ssp0 { + st,pins = "ssp0_grp"; + st,function = "ssp0"; + }; + kbd { + st,pins = "keyboard_6x6_grp"; + st,function = "keyboard"; + }; + sdhci { + st,pins = "sdhci_grp"; + st,function = "sdhci"; + }; + smi-pmx { + st,pins = "smi_2_chips_grp"; + st,function = "smi"; + }; + uart0 { + st,pins = "uart0_grp"; + st,function = "uart0"; + }; + rs485 { + st,pins = "rs485_0_1_tdm_0_1_grp"; + st,function = "rs485_0_1_tdm_0_1"; + }; + i2c1_2 { + st,pins = "i2c_1_2_grp"; + st,function = "i2c_1_2"; + }; + pci { + st,pins = "pcie0_grp","pcie1_grp", + "pcie2_grp"; + st,function = "pci"; + }; + smii { + st,pins = "smii_0_1_2_grp"; + st,function = "smii_0_1_2"; + }; + nand { + st,pins = "nand_8bit_grp", + "nand_16bit_grp"; + st,function = "nand"; + }; + }; + }; + + ahci@b1000000 { + status = "okay"; + }; + + cf@b2800000 { + status = "okay"; + }; + + dma@ea800000 { + status = "okay"; + }; + + dma@eb000000 { + status = "okay"; + }; + + fsmc: flash@b0000000 { + status = "okay"; + }; + + gmac0: eth@e2000000 { + status = "okay"; + }; + + sdhci@b3000000 { + status = "okay"; + }; + + smi: flash@ea000000 { + status = "okay"; + clock-rate=<50000000>; + + flash@e6000000 { + #address-cells = <1>; + #size-cells = <1>; + reg = <0xe6000000 0x800000>; + st,smi-fast-mode; + + partition@0 { + label = "xloader"; + reg = <0x0 0x10000>; + }; + partition@10000 { + label = "u-boot"; + reg = <0x10000 0x40000>; + }; + partition@50000 { + label = "linux"; + reg = <0x50000 0x2c0000>; + }; + partition@310000 { + label = "rootfs"; + reg = <0x310000 0x4f0000>; + }; + }; + }; + + spi0: spi@e0100000 { + status = "okay"; + }; + + ehci@e4800000 { + status = "okay"; + }; + + ehci@e5800000 { + status = "okay"; + }; + + ohci@e4000000 { + status = "okay"; + }; + + ohci@e5000000 { + status = "okay"; + }; + + apb { + adc@e0080000 { + status = "okay"; + }; + + gpio0: gpio@e0600000 { + status = "okay"; + }; + + gpio1: gpio@e0680000 { + status = "okay"; + }; + + i2c0: i2c@e0280000 { + status = "okay"; + }; + + i2c1: i2c@5cd00000 { + status = "okay"; + }; + + kbd@e0300000 { + linux,keymap = < 0x00000001 + 0x00010002 + 0x00020003 + 0x00030004 + 0x00040005 + 0x00050006 + 0x00060007 + 0x00070008 + 0x00080009 + 0x0100000a + 0x0101000c + 0x0102000d + 0x0103000e + 0x0104000f + 0x01050010 + 0x01060011 + 0x01070012 + 0x01080013 + 0x02000014 + 0x02010015 + 0x02020016 + 0x02030017 + 0x02040018 + 0x02050019 + 0x0206001a + 0x0207001b + 0x0208001c + 0x0300001d + 0x0301001e + 0x0302001f + 0x03030020 + 0x03040021 + 0x03050022 + 0x03060023 + 0x03070024 + 0x03080025 + 0x04000026 + 0x04010027 + 0x04020028 + 0x04030029 + 0x0404002a + 0x0405002b + 0x0406002c + 0x0407002d + 0x0408002e + 0x0500002f + 0x05010030 + 0x05020031 + 0x05030032 + 0x05040033 + 0x05050034 + 0x05060035 + 0x05070036 + 0x05080037 + 0x06000038 + 0x06010039 + 0x0602003a + 0x0603003b + 0x0604003c + 0x0605003d + 0x0606003e + 0x0607003f + 0x06080040 + 0x07000041 + 0x07010042 + 0x07020043 + 0x07030044 + 0x07040045 + 0x07050046 + 0x07060047 + 0x07070048 + 0x07080049 + 0x0800004a + 0x0801004b + 0x0802004c + 0x0803004d + 0x0804004e + 0x0805004f + 0x08060050 + 0x08070051 + 0x08080052 >; + autorepeat; + st,mode = <0>; + status = "okay"; + }; + + rtc@e0580000 { + status = "okay"; + }; + + serial@e0000000 { + status = "okay"; + }; + + wdt@ec800620 { + status = "okay"; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/spear1310.dtsi b/arch/arm/boot/dts/spear1310.dtsi new file mode 100644 index 000000000000..9e61da404d57 --- /dev/null +++ b/arch/arm/boot/dts/spear1310.dtsi @@ -0,0 +1,184 @@ +/* + * DTS file for all SPEAr1310 SoCs + * + * Copyright 2012 Viresh Kumar + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/include/ "spear13xx.dtsi" + +/ { + compatible = "st,spear1310"; + + ahb { + ahci@b1000000 { + compatible = "snps,spear-ahci"; + reg = <0xb1000000 0x10000>; + interrupts = <0 68 0x4>; + status = "disabled"; + }; + + ahci@b1800000 { + compatible = "snps,spear-ahci"; + reg = <0xb1800000 0x10000>; + interrupts = <0 69 0x4>; + status = "disabled"; + }; + + ahci@b4000000 { + compatible = "snps,spear-ahci"; + reg = <0xb4000000 0x10000>; + interrupts = <0 70 0x4>; + status = "disabled"; + }; + + gmac1: eth@5c400000 { + compatible = "st,spear600-gmac"; + reg = <0x5c400000 0x8000>; + interrupts = <0 95 0x4>; + interrupt-names = "macirq"; + status = "disabled"; + }; + + gmac2: eth@5c500000 { + compatible = "st,spear600-gmac"; + reg = <0x5c500000 0x8000>; + interrupts = <0 96 0x4>; + interrupt-names = "macirq"; + status = "disabled"; + }; + + gmac3: eth@5c600000 { + compatible = "st,spear600-gmac"; + reg = <0x5c600000 0x8000>; + interrupts = <0 97 0x4>; + interrupt-names = "macirq"; + status = "disabled"; + }; + + gmac4: eth@5c700000 { + compatible = "st,spear600-gmac"; + reg = <0x5c700000 0x8000>; + interrupts = <0 98 0x4>; + interrupt-names = "macirq"; + status = "disabled"; + }; + + spi1: spi@5d400000 { + compatible = "arm,pl022", "arm,primecell"; + reg = <0x5d400000 0x1000>; + interrupts = <0 99 0x4>; + status = "disabled"; + }; + + apb { + i2c1: i2c@5cd00000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,designware-i2c"; + reg = <0x5cd00000 0x1000>; + interrupts = <0 87 0x4>; + status = "disabled"; + }; + + i2c2: i2c@5ce00000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,designware-i2c"; + reg = <0x5ce00000 0x1000>; + interrupts = <0 88 0x4>; + status = "disabled"; + }; + + i2c3: i2c@5cf00000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,designware-i2c"; + reg = <0x5cf00000 0x1000>; + interrupts = <0 89 0x4>; + status = "disabled"; + }; + + i2c4: i2c@5d000000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,designware-i2c"; + reg = <0x5d000000 0x1000>; + interrupts = <0 90 0x4>; + status = "disabled"; + }; + + i2c5: i2c@5d100000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,designware-i2c"; + reg = <0x5d100000 0x1000>; + interrupts = <0 91 0x4>; + status = "disabled"; + }; + + i2c6: i2c@5d200000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,designware-i2c"; + reg = <0x5d200000 0x1000>; + interrupts = <0 92 0x4>; + status = "disabled"; + }; + + i2c7: i2c@5d300000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,designware-i2c"; + reg = <0x5d300000 0x1000>; + interrupts = <0 93 0x4>; + status = "disabled"; + }; + + serial@5c800000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x5c800000 0x1000>; + interrupts = <0 82 0x4>; + status = "disabled"; + }; + + serial@5c900000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x5c900000 0x1000>; + interrupts = <0 83 0x4>; + status = "disabled"; + }; + + serial@5ca00000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x5ca00000 0x1000>; + interrupts = <0 84 0x4>; + status = "disabled"; + }; + + serial@5cb00000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x5cb00000 0x1000>; + interrupts = <0 85 0x4>; + status = "disabled"; + }; + + serial@5cc00000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x5cc00000 0x1000>; + interrupts = <0 86 0x4>; + status = "disabled"; + }; + + thermal@e07008c4 { + st,thermal-flags = <0x7000>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/spear1340-evb.dts b/arch/arm/boot/dts/spear1340-evb.dts new file mode 100644 index 000000000000..0d8472e5ab9f --- /dev/null +++ b/arch/arm/boot/dts/spear1340-evb.dts @@ -0,0 +1,308 @@ +/* + * DTS file for SPEAr1340 Evaluation Baord + * + * Copyright 2012 Viresh Kumar + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "spear1340.dtsi" + +/ { + model = "ST SPEAr1340 Evaluation Board"; + compatible = "st,spear1340-evb", "st,spear1340"; + #address-cells = <1>; + #size-cells = <1>; + + memory { + reg = <0 0x40000000>; + }; + + ahb { + pinmux@e0700000 { + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux { + pads_as_gpio { + st,pins = "pads_as_gpio_grp"; + st,function = "pads_as_gpio"; + }; + fsmc { + st,pins = "fsmc_8bit_grp"; + st,function = "fsmc"; + }; + kbd { + st,pins = "keyboard_row_col_grp", + "keyboard_col5_grp"; + st,function = "keyboard"; + }; + uart0 { + st,pins = "uart0_grp", "uart0_enh_grp"; + st,function = "uart0"; + }; + i2c0-pmx { + st,pins = "i2c0_grp"; + st,function = "i2c0"; + }; + i2c1-pmx { + st,pins = "i2c1_grp"; + st,function = "i2c1"; + }; + spdif-in { + st,pins = "spdif_in_grp"; + st,function = "spdif_in"; + }; + spdif-out { + st,pins = "spdif_out_grp"; + st,function = "spdif_out"; + }; + ssp0 { + st,pins = "ssp0_grp", "ssp0_cs1_grp", + "ssp0_cs3_grp"; + st,function = "ssp0"; + }; + pwm { + st,pins = "pwm2_grp", "pwm3_grp"; + st,function = "pwm"; + }; + smi-pmx { + st,pins = "smi_grp"; + st,function = "smi"; + }; + i2s { + st,pins = "i2s_in_grp", "i2s_out_grp"; + st,function = "i2s"; + }; + gmac { + st,pins = "gmii_grp", "rgmii_grp"; + st,function = "gmac"; + }; + cam3 { + st,pins = "cam3_grp"; + st,function = "cam3"; + }; + cec0 { + st,pins = "cec0_grp"; + st,function = "cec0"; + }; + cec1 { + st,pins = "cec1_grp"; + st,function = "cec1"; + }; + sdhci { + st,pins = "sdhci_grp"; + st,function = "sdhci"; + }; + clcd { + st,pins = "clcd_grp"; + st,function = "clcd"; + }; + sata { + st,pins = "sata_grp"; + st,function = "sata"; + }; + }; + }; + + dma@ea800000 { + status = "okay"; + }; + + dma@eb000000 { + status = "okay"; + }; + + fsmc: flash@b0000000 { + status = "okay"; + }; + + gmac0: eth@e2000000 { + status = "okay"; + }; + + sdhci@b3000000 { + status = "okay"; + }; + + smi: flash@ea000000 { + status = "okay"; + clock-rate=<50000000>; + + flash@e6000000 { + #address-cells = <1>; + #size-cells = <1>; + reg = <0xe6000000 0x800000>; + st,smi-fast-mode; + + partition@0 { + label = "xloader"; + reg = <0x0 0x10000>; + }; + partition@10000 { + label = "u-boot"; + reg = <0x10000 0x40000>; + }; + partition@50000 { + label = "linux"; + reg = <0x50000 0x2c0000>; + }; + partition@310000 { + label = "rootfs"; + reg = <0x310000 0x4f0000>; + }; + }; + }; + + spi0: spi@e0100000 { + status = "okay"; + }; + + ehci@e4800000 { + status = "okay"; + }; + + ehci@e5800000 { + status = "okay"; + }; + + ohci@e4000000 { + status = "okay"; + }; + + ohci@e5000000 { + status = "okay"; + }; + + apb { + adc@e0080000 { + status = "okay"; + }; + + gpio0: gpio@e0600000 { + status = "okay"; + }; + + gpio1: gpio@e0680000 { + status = "okay"; + }; + + i2c0: i2c@e0280000 { + status = "okay"; + }; + + i2c1: i2c@b4000000 { + status = "okay"; + }; + + kbd@e0300000 { + linux,keymap = < 0x00000001 + 0x00010002 + 0x00020003 + 0x00030004 + 0x00040005 + 0x00050006 + 0x00060007 + 0x00070008 + 0x00080009 + 0x0100000a + 0x0101000c + 0x0102000d + 0x0103000e + 0x0104000f + 0x01050010 + 0x01060011 + 0x01070012 + 0x01080013 + 0x02000014 + 0x02010015 + 0x02020016 + 0x02030017 + 0x02040018 + 0x02050019 + 0x0206001a + 0x0207001b + 0x0208001c + 0x0300001d + 0x0301001e + 0x0302001f + 0x03030020 + 0x03040021 + 0x03050022 + 0x03060023 + 0x03070024 + 0x03080025 + 0x04000026 + 0x04010027 + 0x04020028 + 0x04030029 + 0x0404002a + 0x0405002b + 0x0406002c + 0x0407002d + 0x0408002e + 0x0500002f + 0x05010030 + 0x05020031 + 0x05030032 + 0x05040033 + 0x05050034 + 0x05060035 + 0x05070036 + 0x05080037 + 0x06000038 + 0x06010039 + 0x0602003a + 0x0603003b + 0x0604003c + 0x0605003d + 0x0606003e + 0x0607003f + 0x06080040 + 0x07000041 + 0x07010042 + 0x07020043 + 0x07030044 + 0x07040045 + 0x07050046 + 0x07060047 + 0x07070048 + 0x07080049 + 0x0800004a + 0x0801004b + 0x0802004c + 0x0803004d + 0x0804004e + 0x0805004f + 0x08060050 + 0x08070051 + 0x08080052 >; + autorepeat; + st,mode = <0>; + status = "okay"; + }; + + rtc@e0580000 { + status = "okay"; + }; + + serial@e0000000 { + status = "okay"; + }; + + serial@b4100000 { + status = "okay"; + }; + + wdt@ec800620 { + status = "okay"; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/spear1340.dtsi b/arch/arm/boot/dts/spear1340.dtsi new file mode 100644 index 000000000000..a26fc47a55e8 --- /dev/null +++ b/arch/arm/boot/dts/spear1340.dtsi @@ -0,0 +1,56 @@ +/* + * DTS file for all SPEAr1340 SoCs + * + * Copyright 2012 Viresh Kumar + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/include/ "spear13xx.dtsi" + +/ { + compatible = "st,spear1340"; + + ahb { + ahci@b1000000 { + compatible = "snps,spear-ahci"; + reg = <0xb1000000 0x10000>; + interrupts = <0 72 0x4>; + status = "disabled"; + }; + + spi1: spi@5d400000 { + compatible = "arm,pl022", "arm,primecell"; + reg = <0x5d400000 0x1000>; + interrupts = <0 99 0x4>; + status = "disabled"; + }; + + apb { + i2c1: i2c@b4000000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,designware-i2c"; + reg = <0xb4000000 0x1000>; + interrupts = <0 104 0x4>; + status = "disabled"; + }; + + serial@b4100000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0xb4100000 0x1000>; + interrupts = <0 105 0x4>; + status = "disabled"; + }; + + thermal@e07008c4 { + st,thermal-flags = <0x2a00>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/spear13xx.dtsi b/arch/arm/boot/dts/spear13xx.dtsi new file mode 100644 index 000000000000..1f8e1e1481df --- /dev/null +++ b/arch/arm/boot/dts/spear13xx.dtsi @@ -0,0 +1,262 @@ +/* + * DTS file for all SPEAr13xx SoCs + * + * Copyright 2012 Viresh Kumar + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/include/ "skeleton.dtsi" + +/ { + interrupt-parent = <&gic>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + compatible = "arm,cortex-a9"; + reg = <0>; + next-level-cache = <&L2>; + }; + + cpu@1 { + compatible = "arm,cortex-a9"; + reg = <1>; + next-level-cache = <&L2>; + }; + }; + + gic: interrupt-controller@ec801000 { + compatible = "arm,cortex-a9-gic"; + interrupt-controller; + #interrupt-cells = <3>; + reg = < 0xec801000 0x1000 >, + < 0xec800100 0x0100 >; + }; + + pmu { + compatible = "arm,cortex-a9-pmu"; + interrupts = <0 8 0x04 + 0 9 0x04>; + }; + + L2: l2-cache { + compatible = "arm,pl310-cache"; + reg = <0xed000000 0x1000>; + cache-unified; + cache-level = <2>; + }; + + memory { + name = "memory"; + device_type = "memory"; + reg = <0 0x40000000>; + }; + + chosen { + bootargs = "console=ttyAMA0,115200"; + }; + + ahb { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges = <0x50000000 0x50000000 0x10000000 + 0xb0000000 0xb0000000 0x10000000 + 0xe0000000 0xe0000000 0x10000000>; + + sdhci@b3000000 { + compatible = "st,sdhci-spear"; + reg = <0xb3000000 0x100>; + interrupts = <0 28 0x4>; + status = "disabled"; + }; + + cf@b2800000 { + compatible = "arasan,cf-spear1340"; + reg = <0xb2800000 0x100>; + interrupts = <0 29 0x4>; + status = "disabled"; + }; + + dma@ea800000 { + compatible = "snps,dma-spear1340"; + reg = <0xea800000 0x1000>; + interrupts = <0 19 0x4>; + status = "disabled"; + }; + + dma@eb000000 { + compatible = "snps,dma-spear1340"; + reg = <0xeb000000 0x1000>; + interrupts = <0 59 0x4>; + status = "disabled"; + }; + + fsmc: flash@b0000000 { + compatible = "st,spear600-fsmc-nand"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0xb0000000 0x1000 /* FSMC Register */ + 0xb0800000 0x0010>; /* NAND Base */ + reg-names = "fsmc_regs", "nand_data"; + interrupts = <0 20 0x4 + 0 21 0x4 + 0 22 0x4 + 0 23 0x4>; + st,ale-off = <0x20000>; + st,cle-off = <0x10000>; + status = "disabled"; + }; + + gmac0: eth@e2000000 { + compatible = "st,spear600-gmac"; + reg = <0xe2000000 0x8000>; + interrupts = <0 23 0x4 + 0 24 0x4>; + interrupt-names = "macirq", "eth_wake_irq"; + status = "disabled"; + }; + + smi: flash@ea000000 { + compatible = "st,spear600-smi"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0xea000000 0x1000>; + interrupts = <0 30 0x4>; + status = "disabled"; + }; + + spi0: spi@e0100000 { + compatible = "arm,pl022", "arm,primecell"; + reg = <0xe0100000 0x1000>; + interrupts = <0 31 0x4>; + status = "disabled"; + }; + + ehci@e4800000 { + compatible = "st,spear600-ehci", "usb-ehci"; + reg = <0xe4800000 0x1000>; + interrupts = <0 64 0x4>; + status = "disabled"; + }; + + ehci@e5800000 { + compatible = "st,spear600-ehci", "usb-ehci"; + reg = <0xe5800000 0x1000>; + interrupts = <0 66 0x4>; + status = "disabled"; + }; + + ohci@e4000000 { + compatible = "st,spear600-ohci", "usb-ohci"; + reg = <0xe4000000 0x1000>; + interrupts = <0 65 0x4>; + status = "disabled"; + }; + + ohci@e5000000 { + compatible = "st,spear600-ohci", "usb-ohci"; + reg = <0xe5000000 0x1000>; + interrupts = <0 67 0x4>; + status = "disabled"; + }; + + apb { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges = <0x50000000 0x50000000 0x10000000 + 0xb0000000 0xb0000000 0x10000000 + 0xe0000000 0xe0000000 0x10000000>; + + gpio0: gpio@e0600000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0xe0600000 0x1000>; + interrupts = <0 24 0x4>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + status = "disabled"; + }; + + gpio1: gpio@e0680000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0xe0680000 0x1000>; + interrupts = <0 25 0x4>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + status = "disabled"; + }; + + kbd@e0300000 { + compatible = "st,spear300-kbd"; + reg = <0xe0300000 0x1000>; + status = "disabled"; + }; + + i2c0: i2c@e0280000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,designware-i2c"; + reg = <0xe0280000 0x1000>; + interrupts = <0 41 0x4>; + status = "disabled"; + }; + + rtc@e0580000 { + compatible = "st,spear-rtc"; + reg = <0xe0580000 0x1000>; + interrupts = <0 36 0x4>; + status = "disabled"; + }; + + serial@e0000000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0xe0000000 0x1000>; + interrupts = <0 36 0x4>; + status = "disabled"; + }; + + adc@e0080000 { + compatible = "st,spear600-adc"; + reg = <0xe0080000 0x1000>; + interrupts = <0 44 0x4>; + status = "disabled"; + }; + + timer@e0380000 { + compatible = "st,spear-timer"; + reg = <0xe0380000 0x400>; + interrupts = <0 37 0x4>; + }; + + timer@ec800600 { + compatible = "arm,cortex-a9-twd-timer"; + reg = <0xec800600 0x20>; + interrupts = <1 13 0x301>; + }; + + wdt@ec800620 { + compatible = "arm,cortex-a9-twd-wdt"; + reg = <0xec800620 0x20>; + status = "disabled"; + }; + + thermal@e07008c4 { + compatible = "st,thermal-spear1340"; + reg = <0xe07008c4 0x4>; + }; + }; + }; +}; -- cgit v1.2.3 From 0d8e08f5a3b8cda3785e5bc854d89ebba60e9994 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Thu, 19 Apr 2012 22:34:25 +0530 Subject: SPEAr13xx: Add compilation support Signed-off-by: Viresh Kumar --- arch/arm/Makefile | 2 ++ arch/arm/plat-spear/Kconfig | 12 ++++++++++++ arch/arm/plat-spear/Makefile | 5 +++-- 3 files changed, 17 insertions(+), 2 deletions(-) diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 047a20780fc1..2aa75b58bf12 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -192,6 +192,8 @@ machine-$(CONFIG_ARCH_VEXPRESS) := vexpress machine-$(CONFIG_ARCH_VT8500) := vt8500 machine-$(CONFIG_ARCH_W90X900) := w90x900 machine-$(CONFIG_FOOTBRIDGE) := footbridge +machine-$(CONFIG_MACH_SPEAR1310) := spear13xx +machine-$(CONFIG_MACH_SPEAR1340) := spear13xx machine-$(CONFIG_MACH_SPEAR300) := spear3xx machine-$(CONFIG_MACH_SPEAR310) := spear3xx machine-$(CONFIG_MACH_SPEAR320) := spear3xx diff --git a/arch/arm/plat-spear/Kconfig b/arch/arm/plat-spear/Kconfig index 387655b5ce05..4404f82d5979 100644 --- a/arch/arm/plat-spear/Kconfig +++ b/arch/arm/plat-spear/Kconfig @@ -8,6 +8,17 @@ choice prompt "ST SPEAr Family" default ARCH_SPEAR3XX +config ARCH_SPEAR13XX + bool "ST SPEAr13xx with Device Tree" + select ARM_GIC + select CPU_V7 + select USE_OF + select HAVE_SMP + select MIGHT_HAVE_CACHE_L2X0 + select PINCTRL + help + Supports for ARM's SPEAR13XX family + config ARCH_SPEAR3XX bool "ST SPEAr3xx with Device Tree" select ARM_VIC @@ -27,6 +38,7 @@ config ARCH_SPEAR6XX endchoice # Adding SPEAr machine specific configuration files +source "arch/arm/mach-spear13xx/Kconfig" source "arch/arm/mach-spear3xx/Kconfig" source "arch/arm/mach-spear6xx/Kconfig" diff --git a/arch/arm/plat-spear/Makefile b/arch/arm/plat-spear/Makefile index 38f1235f4632..2607bd05c525 100644 --- a/arch/arm/plat-spear/Makefile +++ b/arch/arm/plat-spear/Makefile @@ -3,6 +3,7 @@ # # Common support -obj-y := restart.o time.o pl080.o +obj-y := restart.o time.o -obj-$(CONFIG_ARCH_SPEAR3XX) += shirq.o +obj-$(CONFIG_ARCH_SPEAR3XX) += pl080.o shirq.o +obj-$(CONFIG_ARCH_SPEAR6XX) += pl080.o -- cgit v1.2.3 From d57bde8d73e809c935cbe68fa950e430d0a6201c Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Wed, 18 Apr 2012 08:31:46 +0530 Subject: SPEAr13xx: Add defconfig Signed-off-by: Viresh Kumar --- arch/arm/configs/spear13xx_defconfig | 95 ++++++++++++++++++++++++++++++++++++ 1 file changed, 95 insertions(+) create mode 100644 arch/arm/configs/spear13xx_defconfig diff --git a/arch/arm/configs/spear13xx_defconfig b/arch/arm/configs/spear13xx_defconfig new file mode 100644 index 000000000000..1fdb82694ca2 --- /dev/null +++ b/arch/arm/configs/spear13xx_defconfig @@ -0,0 +1,95 @@ +CONFIG_EXPERIMENTAL=y +CONFIG_SYSVIPC=y +CONFIG_BSD_PROCESS_ACCT=y +CONFIG_BLK_DEV_INITRD=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODVERSIONS=y +CONFIG_PARTITION_ADVANCED=y +CONFIG_PLAT_SPEAR=y +CONFIG_ARCH_SPEAR13XX=y +CONFIG_MACH_SPEAR1310=y +CONFIG_MACH_SPEAR1340=y +# CONFIG_SWP_EMULATE is not set +CONFIG_SMP=y +# CONFIG_SMP_ON_UP is not set +# CONFIG_ARM_CPU_TOPOLOGY is not set +CONFIG_ARM_APPENDED_DTB=y +CONFIG_ARM_ATAG_DTB_COMPAT=y +CONFIG_BINFMT_MISC=y +CONFIG_NET=y +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_MTD=y +CONFIG_MTD_OF_PARTS=y +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLOCK=y +CONFIG_MTD_NAND=y +CONFIG_MTD_NAND_FSMC=y +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_SIZE=16384 +CONFIG_ATA=y +# CONFIG_SATA_PMP is not set +CONFIG_SATA_AHCI_PLATFORM=y +CONFIG_PATA_ARASAN_CF=y +CONFIG_NETDEVICES=y +# CONFIG_NET_VENDOR_BROADCOM is not set +# CONFIG_NET_VENDOR_CIRRUS is not set +# CONFIG_NET_VENDOR_FARADAY is not set +# CONFIG_NET_VENDOR_INTEL is not set +# CONFIG_NET_VENDOR_MICREL is not set +# CONFIG_NET_VENDOR_NATSEMI is not set +# CONFIG_NET_VENDOR_SEEQ is not set +# CONFIG_NET_VENDOR_SMSC is not set +CONFIG_STMMAC_ETH=y +# CONFIG_WLAN is not set +CONFIG_INPUT_FF_MEMLESS=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +# CONFIG_KEYBOARD_ATKBD is not set +CONFIG_KEYBOARD_SPEAR=y +# CONFIG_INPUT_MOUSE is not set +# CONFIG_LEGACY_PTYS is not set +CONFIG_SERIAL_AMBA_PL011=y +CONFIG_SERIAL_AMBA_PL011_CONSOLE=y +# CONFIG_HW_RANDOM is not set +CONFIG_RAW_DRIVER=y +CONFIG_MAX_RAW_DEVS=8192 +CONFIG_I2C=y +CONFIG_I2C_DESIGNWARE_PLATFORM=y +CONFIG_SPI=y +CONFIG_SPI_PL022=y +CONFIG_GPIO_SYSFS=y +CONFIG_GPIO_PL061=y +# CONFIG_HWMON is not set +CONFIG_WATCHDOG=y +CONFIG_MPCORE_WATCHDOG=y +# CONFIG_HID_SUPPORT is not set +CONFIG_USB=y +# CONFIG_USB_DEVICE_CLASS is not set +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_OHCI_HCD=y +CONFIG_MMC=y +CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_SPEAR=y +CONFIG_RTC_CLASS=y +CONFIG_DMADEVICES=y +CONFIG_DW_DMAC=y +CONFIG_DMATEST=m +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +CONFIG_EXT2_FS_SECURITY=y +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_SECURITY=y +CONFIG_AUTOFS4_FS=m +CONFIG_MSDOS_FS=m +CONFIG_VFAT_FS=m +CONFIG_FAT_DEFAULT_IOCHARSET="ascii" +CONFIG_TMPFS=y +CONFIG_JFFS2_FS=y +CONFIG_NLS_DEFAULT="utf8" +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_ASCII=m +CONFIG_MAGIC_SYSRQ=y +CONFIG_DEBUG_FS=y +CONFIG_DEBUG_KERNEL=y +CONFIG_DEBUG_SPINLOCK=y +CONFIG_DEBUG_INFO=y -- cgit v1.2.3 From 71e09a9e7d36151e33de8aeef76cc956259a258c Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Fri, 20 Apr 2012 22:39:48 +0530 Subject: SPEAr: Update MAINTAINERS and Documentation This patchset updates MAINTAINERS files, makes shiraz as second Maintainer for SPEAr SoCs. It also updates Documentation mostly for SPEAr13xx. Signed-off-by: Viresh Kumar --- Documentation/arm/SPEAr/overview.txt | 32 +++++++++++++------------ Documentation/devicetree/bindings/arm/spear.txt | 14 +++++------ MAINTAINERS | 13 ++++++++++ 3 files changed, 37 insertions(+), 22 deletions(-) diff --git a/Documentation/arm/SPEAr/overview.txt b/Documentation/arm/SPEAr/overview.txt index 28a9af953b9d..57aae7765c74 100644 --- a/Documentation/arm/SPEAr/overview.txt +++ b/Documentation/arm/SPEAr/overview.txt @@ -8,9 +8,8 @@ Introduction weblink : http://www.st.com/spear The ST Microelectronics SPEAr range of ARM9/CortexA9 System-on-Chip CPUs are - supported by the 'spear' platform of ARM Linux. Currently SPEAr300, - SPEAr310, SPEAr320 and SPEAr600 SOCs are supported. Support for the SPEAr13XX - series is in progress. + supported by the 'spear' platform of ARM Linux. Currently SPEAr1310, + SPEAr1340, SPEAr300, SPEAr310, SPEAr320 and SPEAr600 SOCs are supported. Hierarchy in SPEAr is as follows: @@ -26,33 +25,36 @@ Introduction - SPEAr600 (SOC) - SPEAr600 Evaluation Board - SPEAr13XX (13XX SOC series, based on ARM CORTEXA9) - - SPEAr1300 (SOC) + - SPEAr1310 (SOC) + - SPEAr1310 Evaluation Board + - SPEAr1340 (SOC) + - SPEAr1340 Evaluation Board Configuration ------------- A generic configuration is provided for each machine, and can be used as the default by - make spear600_defconfig - make spear300_defconfig - make spear310_defconfig - make spear320_defconfig + make spear13xx_defconfig + make spear3xx_defconfig + make spear6xx_defconfig Layout ------ - The common files for multiple machine families (SPEAr3XX, SPEAr6XX and - SPEAr13XX) are located in the platform code contained in arch/arm/plat-spear + The common files for multiple machine families (SPEAr3xx, SPEAr6xx and + SPEAr13xx) are located in the platform code contained in arch/arm/plat-spear with headers in plat/. Each machine series have a directory with name arch/arm/mach-spear followed by series name. Like mach-spear3xx, mach-spear6xx and mach-spear13xx. - Common file for machines of spear3xx family is mach-spear3xx/spear3xx.c and for - spear6xx is mach-spear6xx/spear6xx.c. mach-spear* also contain soc/machine - specific files, like spear300.c, spear310.c, spear320.c and spear600.c. - mach-spear* doesn't contains board specific files as they fully support - Flattened Device Tree. + Common file for machines of spear3xx family is mach-spear3xx/spear3xx.c, for + spear6xx is mach-spear6xx/spear6xx.c and for spear13xx family is + mach-spear13xx/spear13xx.c. mach-spear* also contain soc/machine specific + files, like spear1310.c, spear1340.c spear300.c, spear310.c, spear320.c and + spear600.c. mach-spear* doesn't contains board specific files as they fully + support Flattened Device Tree. Document Author diff --git a/Documentation/devicetree/bindings/arm/spear.txt b/Documentation/devicetree/bindings/arm/spear.txt index aa5f355cc947..0d42949df6c2 100644 --- a/Documentation/devicetree/bindings/arm/spear.txt +++ b/Documentation/devicetree/bindings/arm/spear.txt @@ -2,25 +2,25 @@ ST SPEAr Platforms Device Tree Bindings --------------------------------------- Boards with the ST SPEAr600 SoC shall have the following properties: - Required root node property: - compatible = "st,spear600"; Boards with the ST SPEAr300 SoC shall have the following properties: - Required root node property: - compatible = "st,spear300"; Boards with the ST SPEAr310 SoC shall have the following properties: - Required root node property: - compatible = "st,spear310"; Boards with the ST SPEAr320 SoC shall have the following properties: +Required root node property: +compatible = "st,spear320"; +Boards with the ST SPEAr1310 SoC shall have the following properties: Required root node property: +compatible = "st,spear1310"; -compatible = "st,spear320"; +Boards with the ST SPEAr1340 SoC shall have the following properties: +Required root node property: +compatible = "st,spear1340"; diff --git a/MAINTAINERS b/MAINTAINERS index 27085a75162f..3139e56f8790 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -6316,14 +6316,25 @@ F: include/linux/compiler.h SPEAR PLATFORM SUPPORT M: Viresh Kumar +M: Shiraz Hashim L: spear-devel@list.st.com L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) W: http://www.st.com/spear S: Maintained F: arch/arm/plat-spear/ +SPEAR13XX MACHINE SUPPORT +M: Viresh Kumar +M: Shiraz Hashim +L: spear-devel@list.st.com +L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) +W: http://www.st.com/spear +S: Maintained +F: arch/arm/mach-spear13xx/ + SPEAR3XX MACHINE SUPPORT M: Viresh Kumar +M: Shiraz Hashim L: spear-devel@list.st.com L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) W: http://www.st.com/spear @@ -6332,6 +6343,8 @@ F: arch/arm/mach-spear3xx/ SPEAR6XX MACHINE SUPPORT M: Rajeev Kumar +M: Shiraz Hashim +M: Viresh Kumar L: spear-devel@list.st.com L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) W: http://www.st.com/spear -- cgit v1.2.3 From eb3f995d7e73fd78b8fcdc55cfbf01a74a09a6e8 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Fri, 27 Apr 2012 17:05:10 +0530 Subject: pinctrl: SPEAr1310: Fix pin numbers for clcd_high_res Signed-off-by: Viresh Kumar Acked-by: Linus Walleij --- drivers/pinctrl/spear/pinctrl-spear1310.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/pinctrl/spear/pinctrl-spear1310.c b/drivers/pinctrl/spear/pinctrl-spear1310.c index 12b094dc806f..fff168be7f00 100644 --- a/drivers/pinctrl/spear/pinctrl-spear1310.c +++ b/drivers/pinctrl/spear/pinctrl-spear1310.c @@ -437,7 +437,7 @@ static struct spear_pingroup clcd_pingroup = { }; static const unsigned clcd_high_res_pins[] = { 30, 31, 32, 33, 34, 35, 36, 37, - 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50, 51, 52 }; + 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50, 51, 52, 53 }; static struct spear_muxreg clcd_high_res_muxreg[] = { { .reg = PAD_FUNCTION_EN_1, -- cgit v1.2.3