From 4d5843616d16eb1a5851a976ec82b8d436233ad7 Mon Sep 17 00:00:00 2001 From: Christoph Fritz Date: Fri, 19 Apr 2013 18:29:41 +0200 Subject: ARM: OMAP2+: nand: reorganize gpmc timing values This patch removes omap2_nand_gpmc_retime() which was used to quirk some timing values before gpmc_cs_set_timings(). Due to recent changes, gpmc_cs_set_timings() has evolved so that there is no more need for a retime function. To keep the gpmc configuration consistent for legacy board files, this patch also adds oe_on and we_on to nand_default_timings[] as they would be by the retime function. Signed-off-by: Christoph Fritz Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/board-flash.c | 3 +++ arch/arm/mach-omap2/gpmc-nand.c | 40 +-------------------------------------- 2 files changed, 4 insertions(+), 39 deletions(-) diff --git a/arch/arm/mach-omap2/board-flash.c b/arch/arm/mach-omap2/board-flash.c index c33adea0247c..fc20a61f6b2a 100644 --- a/arch/arm/mach-omap2/board-flash.c +++ b/arch/arm/mach-omap2/board-flash.c @@ -112,6 +112,9 @@ struct gpmc_timings nand_default_timings[1] = { .cs_rd_off = 36, .cs_wr_off = 36, + .we_on = 6, + .oe_on = 6, + .adv_on = 6, .adv_rd_off = 24, .adv_wr_off = 36, diff --git a/arch/arm/mach-omap2/gpmc-nand.c b/arch/arm/mach-omap2/gpmc-nand.c index d9c27195caf0..c8044b08dada 100644 --- a/arch/arm/mach-omap2/gpmc-nand.c +++ b/arch/arm/mach-omap2/gpmc-nand.c @@ -43,44 +43,6 @@ static struct platform_device gpmc_nand_device = { .resource = gpmc_nand_resource, }; -static int omap2_nand_gpmc_retime( - struct omap_nand_platform_data *gpmc_nand_data, - struct gpmc_timings *gpmc_t) -{ - struct gpmc_timings t; - int err; - - memset(&t, 0, sizeof(t)); - t.sync_clk = gpmc_t->sync_clk; - t.cs_on = gpmc_t->cs_on; - t.adv_on = gpmc_t->adv_on; - - /* Read */ - t.adv_rd_off = gpmc_t->adv_rd_off; - t.oe_on = t.adv_on; - t.access = gpmc_t->access; - t.oe_off = gpmc_t->oe_off; - t.cs_rd_off = gpmc_t->cs_rd_off; - t.rd_cycle = gpmc_t->rd_cycle; - - /* Write */ - t.adv_wr_off = gpmc_t->adv_wr_off; - t.we_on = t.oe_on; - if (cpu_is_omap34xx()) { - t.wr_data_mux_bus = gpmc_t->wr_data_mux_bus; - t.wr_access = gpmc_t->wr_access; - } - t.we_off = gpmc_t->we_off; - t.cs_wr_off = gpmc_t->cs_wr_off; - t.wr_cycle = gpmc_t->wr_cycle; - - err = gpmc_cs_set_timings(gpmc_nand_data->cs, &t); - if (err) - return err; - - return 0; -} - static bool gpmc_hwecc_bch_capable(enum omap_ecc ecc_opt) { /* support only OMAP3 class */ @@ -131,7 +93,7 @@ int gpmc_nand_init(struct omap_nand_platform_data *gpmc_nand_data, gpmc_get_client_irq(GPMC_IRQ_COUNT_EVENT); if (gpmc_t) { - err = omap2_nand_gpmc_retime(gpmc_nand_data, gpmc_t); + err = gpmc_cs_set_timings(gpmc_nand_data->cs, gpmc_t); if (err < 0) { dev_err(dev, "Unable to set gpmc timings: %d\n", err); return err; -- cgit v1.2.3 From 496c8a0bbb726c2608b3b1318d231ab04a9a2ec3 Mon Sep 17 00:00:00 2001 From: Mark Jackson Date: Fri, 19 Apr 2013 21:08:28 +0100 Subject: ARM: OMAP2+: Allow NAND transfer mode to be specified in DT OMAP devices support various NAND transfer modes. Currently all device-tree definitions will use the default "prefetch polled" mode, so this patch enables the transfer mode to be specified in the device-tree. Signed-off-by: Mark Jackson Acked-by: Pekon Gupta Signed-off-by: Tony Lindgren --- Documentation/devicetree/bindings/mtd/gpmc-nand.txt | 8 ++++++++ arch/arm/mach-omap2/gpmc.c | 14 ++++++++++++++ 2 files changed, 22 insertions(+) diff --git a/Documentation/devicetree/bindings/mtd/gpmc-nand.txt b/Documentation/devicetree/bindings/mtd/gpmc-nand.txt index 6a983c1d87cd..df338cb5059c 100644 --- a/Documentation/devicetree/bindings/mtd/gpmc-nand.txt +++ b/Documentation/devicetree/bindings/mtd/gpmc-nand.txt @@ -29,6 +29,13 @@ Optional properties: "bch4" 4-bit BCH ecc code "bch8" 8-bit BCH ecc code + - ti,nand-xfer-type: A string setting the data transfer type. One of: + + "prefetch-polled" Prefetch polled mode (default) + "polled" Polled mode, without prefetch + "prefetch-dma" Prefetch enabled sDMA mode + "prefetch-irq" Prefetch enabled irq mode + - elm_id: Specifies elm device node. This is required to support BCH error correction using ELM module. @@ -55,6 +62,7 @@ Example for an AM33xx board: reg = <0 0 0>; /* CS0, offset 0 */ nand-bus-width = <16>; ti,nand-ecc-opt = "bch8"; + ti,nand-xfer-type = "polled"; gpmc,sync-clk-ps = <0>; gpmc,cs-on-ns = <0>; diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c index 6c4da1254f53..a195468286f4 100644 --- a/arch/arm/mach-omap2/gpmc.c +++ b/arch/arm/mach-omap2/gpmc.c @@ -1345,6 +1345,13 @@ static const char * const nand_ecc_opts[] = { [OMAP_ECC_BCH8_CODE_HW] = "bch8", }; +static const char * const nand_xfer_types[] = { + [NAND_OMAP_PREFETCH_POLLED] = "prefetch-polled", + [NAND_OMAP_POLLED] = "polled", + [NAND_OMAP_PREFETCH_DMA] = "prefetch-dma", + [NAND_OMAP_PREFETCH_IRQ] = "prefetch-irq", +}; + static int gpmc_probe_nand_child(struct platform_device *pdev, struct device_node *child) { @@ -1374,6 +1381,13 @@ static int gpmc_probe_nand_child(struct platform_device *pdev, break; } + if (!of_property_read_string(child, "ti,nand-xfer-type", &s)) + for (val = 0; val < ARRAY_SIZE(nand_xfer_types); val++) + if (!strcasecmp(s, nand_xfer_types[val])) { + gpmc_nand_data->xfer_type = val; + break; + } + val = of_get_nand_bus_width(child); if (val == 16) gpmc_nand_data->devsize = NAND_BUSWIDTH_16; -- cgit v1.2.3 From f40739faba8e804cf46505869ab98ad7c4a88833 Mon Sep 17 00:00:00 2001 From: Jon Hunter Date: Tue, 30 Apr 2013 09:11:22 -0500 Subject: ARM: dts: OMAP2+: Simplify NAND support Commit 8c8a777 (ARM: OMAP2+: Add function to read GPMC settings from device-tree) added a device-tree property "gpmc,device-nand" to indicate is the GPMC child device is NAND. This commit should have updated the GPMC NAND documentation (Documentation/devicetree/bindings/mtd/gpmc-nand.txt) to list the property "gpmc,device-nand" as a required property and also updated the example. However, this property is redundant and not needed because the GPMC child device node for NAND is called "nand". Therefore, remove this property. Signed-off-by: Jon Hunter Signed-off-by: Tony Lindgren --- Documentation/devicetree/bindings/bus/ti-gpmc.txt | 1 - arch/arm/boot/dts/omap3430-sdp.dts | 1 - arch/arm/mach-omap2/gpmc-nand.c | 4 ++-- arch/arm/mach-omap2/gpmc.c | 1 - 4 files changed, 2 insertions(+), 5 deletions(-) diff --git a/Documentation/devicetree/bindings/bus/ti-gpmc.txt b/Documentation/devicetree/bindings/bus/ti-gpmc.txt index 4b87ea1194e3..704be9306c9f 100644 --- a/Documentation/devicetree/bindings/bus/ti-gpmc.txt +++ b/Documentation/devicetree/bindings/bus/ti-gpmc.txt @@ -95,7 +95,6 @@ GPMC chip-select settings properties for child nodes. All are optional. - gpmc,burst-wrap Enables wrap bursting - gpmc,burst-read Enables read page/burst mode - gpmc,burst-write Enables write page/burst mode -- gpmc,device-nand Device is NAND - gpmc,device-width Total width of device(s) connected to a GPMC chip-select in bytes. The GPMC supports 8-bit and 16-bit devices and so this property must be diff --git a/arch/arm/boot/dts/omap3430-sdp.dts b/arch/arm/boot/dts/omap3430-sdp.dts index 144ae43453c4..6076d016b479 100644 --- a/arch/arm/boot/dts/omap3430-sdp.dts +++ b/arch/arm/boot/dts/omap3430-sdp.dts @@ -105,7 +105,6 @@ nand-bus-width = <8>; ti,nand-ecc-opt = "sw"; - gpmc,device-nand; gpmc,cs-on-ns = <0>; gpmc,cs-rd-off-ns = <36>; gpmc,cs-wr-off-ns = <36>; diff --git a/arch/arm/mach-omap2/gpmc-nand.c b/arch/arm/mach-omap2/gpmc-nand.c index c8044b08dada..662c7fd633cc 100644 --- a/arch/arm/mach-omap2/gpmc-nand.c +++ b/arch/arm/mach-omap2/gpmc-nand.c @@ -102,8 +102,6 @@ int gpmc_nand_init(struct omap_nand_platform_data *gpmc_nand_data, if (gpmc_nand_data->of_node) { gpmc_read_settings_dt(gpmc_nand_data->of_node, &s); } else { - s.device_nand = true; - /* Enable RD PIN Monitoring Reg */ if (gpmc_nand_data->dev_ready) { s.wait_on_read = true; @@ -111,6 +109,8 @@ int gpmc_nand_init(struct omap_nand_platform_data *gpmc_nand_data, } } + s.device_nand = true; + if (gpmc_nand_data->devsize == NAND_BUSWIDTH_16) s.device_width = GPMC_DEVWIDTH_16BIT; else diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c index a195468286f4..70d11ceec0d7 100644 --- a/arch/arm/mach-omap2/gpmc.c +++ b/arch/arm/mach-omap2/gpmc.c @@ -1245,7 +1245,6 @@ void gpmc_read_settings_dt(struct device_node *np, struct gpmc_settings *p) p->sync_read = of_property_read_bool(np, "gpmc,sync-read"); p->sync_write = of_property_read_bool(np, "gpmc,sync-write"); - p->device_nand = of_property_read_bool(np, "gpmc,device-nand"); of_property_read_u32(np, "gpmc,device-width", &p->device_width); of_property_read_u32(np, "gpmc,mux-add-data", &p->mux_add_data); -- cgit v1.2.3 From f023f8dd59bf93e29e9b9bd98a92eeef43b1a32a Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Thu, 4 Apr 2013 12:54:15 +0000 Subject: cpufreq: s3c24xx: move cpufreq driver to drivers/cpufreq This patch moves cpufreq driver of Samsung's ARM based s3c24xx platform to drivers/cpufreq. Signed-off-by: Viresh Kumar Acked-by: Arnd Bergmann Acked-by: Rafael J. Wysocki Signed-off-by: Kukjin Kim --- arch/arm/Kconfig | 47 -- arch/arm/mach-s3c24xx/Kconfig | 66 +- arch/arm/mach-s3c24xx/Makefile | 6 - arch/arm/mach-s3c24xx/cpufreq-debugfs.c | 198 ------ arch/arm/mach-s3c24xx/cpufreq-s3c2410.c | 160 ----- arch/arm/mach-s3c24xx/cpufreq-s3c2412.c | 258 -------- arch/arm/mach-s3c24xx/cpufreq-s3c2440.c | 312 --------- arch/arm/mach-s3c24xx/cpufreq.c | 711 --------------------- arch/arm/mach-s3c24xx/include/mach/s3c2412.h | 26 + arch/arm/mach-s3c24xx/iotiming-s3c2412.c | 2 +- arch/arm/mach-s3c24xx/s3c2412.h | 26 - arch/arm/plat-samsung/include/plat/cpu-freq-core.h | 10 +- arch/arm/plat-samsung/include/plat/cpu-freq.h | 6 +- drivers/cpufreq/Kconfig.arm | 58 ++ drivers/cpufreq/Makefile | 5 + drivers/cpufreq/s3c2410-cpufreq.c | 160 +++++ drivers/cpufreq/s3c2412-cpufreq.c | 257 ++++++++ drivers/cpufreq/s3c2440-cpufreq.c | 312 +++++++++ drivers/cpufreq/s3c24xx-cpufreq-debugfs.c | 198 ++++++ drivers/cpufreq/s3c24xx-cpufreq.c | 711 +++++++++++++++++++++ 20 files changed, 1763 insertions(+), 1766 deletions(-) delete mode 100644 arch/arm/mach-s3c24xx/cpufreq-debugfs.c delete mode 100644 arch/arm/mach-s3c24xx/cpufreq-s3c2410.c delete mode 100644 arch/arm/mach-s3c24xx/cpufreq-s3c2412.c delete mode 100644 arch/arm/mach-s3c24xx/cpufreq-s3c2440.c delete mode 100644 arch/arm/mach-s3c24xx/cpufreq.c create mode 100644 arch/arm/mach-s3c24xx/include/mach/s3c2412.h delete mode 100644 arch/arm/mach-s3c24xx/s3c2412.h create mode 100644 drivers/cpufreq/s3c2410-cpufreq.c create mode 100644 drivers/cpufreq/s3c2412-cpufreq.c create mode 100644 drivers/cpufreq/s3c2440-cpufreq.c create mode 100644 drivers/cpufreq/s3c24xx-cpufreq-debugfs.c create mode 100644 drivers/cpufreq/s3c24xx-cpufreq.c diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index d423d58f938d..f6762794fbb4 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -2053,53 +2053,6 @@ menu "CPU Power Management" if ARCH_HAS_CPUFREQ source "drivers/cpufreq/Kconfig" - -config CPU_FREQ_S3C - bool - help - Internal configuration node for common cpufreq on Samsung SoC - -config CPU_FREQ_S3C24XX - bool "CPUfreq driver for Samsung S3C24XX series CPUs (EXPERIMENTAL)" - depends on ARCH_S3C24XX && CPU_FREQ - select CPU_FREQ_S3C - help - This enables the CPUfreq driver for the Samsung S3C24XX family - of CPUs. - - For details, take a look at . - - If in doubt, say N. - -config CPU_FREQ_S3C24XX_PLL - bool "Support CPUfreq changing of PLL frequency (EXPERIMENTAL)" - depends on CPU_FREQ_S3C24XX - help - Compile in support for changing the PLL frequency from the - S3C24XX series CPUfreq driver. The PLL takes time to settle - after a frequency change, so by default it is not enabled. - - This also means that the PLL tables for the selected CPU(s) will - be built which may increase the size of the kernel image. - -config CPU_FREQ_S3C24XX_DEBUG - bool "Debug CPUfreq Samsung driver core" - depends on CPU_FREQ_S3C24XX - help - Enable s3c_freq_dbg for the Samsung S3C CPUfreq core - -config CPU_FREQ_S3C24XX_IODEBUG - bool "Debug CPUfreq Samsung driver IO timing" - depends on CPU_FREQ_S3C24XX - help - Enable s3c_freq_iodbg for the Samsung S3C CPUfreq core - -config CPU_FREQ_S3C24XX_DEBUGFS - bool "Export debugfs for CPUFreq" - depends on CPU_FREQ_S3C24XX && DEBUG_FS - help - Export status information via debugfs. - endif source "drivers/cpuidle/Kconfig" diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig index f2f7088bfd22..ed8aadc646f9 100644 --- a/arch/arm/mach-s3c24xx/Kconfig +++ b/arch/arm/mach-s3c24xx/Kconfig @@ -28,7 +28,7 @@ config CPU_S3C2410 select CPU_ARM920T select CPU_LLSERIAL_S3C2410 select S3C2410_CLOCK - select S3C2410_CPUFREQ if CPU_FREQ_S3C24XX + select ARM_S3C2410_CPUFREQ if ARM_S3C24XX_CPUFREQ select S3C2410_PM if PM select SAMSUNG_HRT help @@ -204,27 +204,38 @@ config S3C24XX_GPIO_EXTRA128 Add an extra 128 gpio numbers to the available GPIO pool. This is available for boards that need extra gpios for external devices. +config S3C24XX_PLL + bool "Support CPUfreq changing of PLL frequency (EXPERIMENTAL)" + depends on ARM_S3C24XX + help + Compile in support for changing the PLL frequency from the + S3C24XX series CPUfreq driver. The PLL takes time to settle + after a frequency change, so by default it is not enabled. + + This also means that the PLL tables for the selected CPU(s) will + be built which may increase the size of the kernel image. + # cpu frequency items common between s3c2410 and s3c2440/s3c2442 config S3C2410_IOTIMING bool - depends on CPU_FREQ_S3C24XX + depends on ARM_S3C24XX_CPUFREQ help Internal node to select io timing code that is common to the s3c2410 and s3c2440/s3c2442 cpu frequency support. config S3C2410_CPUFREQ_UTILS - bool - depends on CPU_FREQ_S3C24XX - help - Internal node to select timing code that is common to the s3c2410 - and s3c2440/s3c244 cpu frequency support. + bool + depends on ARM_S3C24XX_CPUFREQ + help + Internal node to select timing code that is common to the s3c2410 + and s3c2440/s3c244 cpu frequency support. # cpu frequency support common to s3c2412, s3c2413 and s3c2442 config S3C2412_IOTIMING bool - depends on CPU_FREQ_S3C24XX && (CPU_S3C2412 || CPU_S3C2443) + depends on ARM_S3C24XX_CPUFREQ && (CPU_S3C2412 || CPU_S3C2443) help Intel node to select io timing code that is common to the s3c2412 and the s3c2443. @@ -233,16 +244,9 @@ config S3C2412_IOTIMING if CPU_S3C2410 -config S3C2410_CPUFREQ - bool - depends on CPU_FREQ_S3C24XX - select S3C2410_CPUFREQ_UTILS - help - CPU Frequency scaling support for S3C2410 - config S3C2410_PLL bool - depends on S3C2410_CPUFREQ && CPU_FREQ_S3C24XX_PLL + depends on ARM_S3C2410_CPUFREQ && S3C24XX_PLL default y help Select the PLL table for the S3C2410 @@ -278,7 +282,7 @@ config ARCH_BAST bool "Simtec Electronics BAST (EB2410ITX)" select ISA select MACH_BAST_IDE - select S3C2410_IOTIMING if S3C2410_CPUFREQ + select S3C2410_IOTIMING if ARM_S3C2410_CPUFREQ select S3C24XX_DCLK select S3C24XX_SIMTEC_NOR select S3C24XX_SIMTEC_PM if PM @@ -385,14 +389,6 @@ config CPU_S3C2412_ONLY !CPU_S3C2442 && !CPU_S3C2443 default y -config S3C2412_CPUFREQ - bool - depends on CPU_FREQ_S3C24XX - default y - select S3C2412_IOTIMING - help - CPU Frequency scaling support for S3C2412 and S3C2413 SoC CPUs. - config S3C2412_DMA bool help @@ -494,14 +490,6 @@ endif # CPU_S3C2416 if CPU_S3C2440 -config S3C2440_CPUFREQ - bool "S3C2440/S3C2442 CPU Frequency scaling support" - depends on CPU_FREQ_S3C24XX && (CPU_S3C2440 || CPU_S3C2442) - default y - select S3C2410_CPUFREQ_UTILS - help - CPU Frequency scaling support for S3C2440 and S3C2442 SoC CPUs. - config S3C2440_DMA bool help @@ -521,15 +509,15 @@ config S3C2440_XTAL_16934400 config S3C2440_PLL_12000000 bool - depends on S3C2440_CPUFREQ && S3C2440_XTAL_12000000 - default y if CPU_FREQ_S3C24XX_PLL + depends on ARM_S3C2440_CPUFREQ && S3C2440_XTAL_12000000 + default y if S3C24XX_PLL help PLL tables for S3C2440 or S3C2442 CPUs with 12MHz crystals. config S3C2440_PLL_16934400 bool - depends on S3C2440_CPUFREQ && S3C2440_XTAL_16934400 - default y if CPU_FREQ_S3C24XX_PLL + depends on ARM_S3C2440_CPUFREQ && S3C2440_XTAL_16934400 + default y if S3C24XX_PLL help PLL tables for S3C2440 or S3C2442 CPUs with 16.934MHz crystals. @@ -583,7 +571,7 @@ config MACH_NEXCODER_2440 config MACH_OSIRIS bool "Simtec IM2440D20 (OSIRIS) module" - select S3C2410_IOTIMING if S3C2440_CPUFREQ + select S3C2410_IOTIMING if ARM_S3C2440_CPUFREQ select S3C2440_XTAL_12000000 select S3C24XX_DCLK select S3C24XX_GPIO_EXTRA128 @@ -655,7 +643,7 @@ config MACH_RX1950 bool "HP iPAQ rx1950" select I2C select PM_H1940 if PM - select S3C2410_IOTIMING if S3C2440_CPUFREQ + select S3C2410_IOTIMING if ARM_S3C2440_CPUFREQ select S3C2440_XTAL_16934400 select S3C24XX_DCLK select S3C24XX_PWM diff --git a/arch/arm/mach-s3c24xx/Makefile b/arch/arm/mach-s3c24xx/Makefile index 6f46ecfc8396..a3b495a4bba0 100644 --- a/arch/arm/mach-s3c24xx/Makefile +++ b/arch/arm/mach-s3c24xx/Makefile @@ -17,13 +17,11 @@ obj- := obj-y += common.o obj-$(CONFIG_CPU_S3C2410) += s3c2410.o -obj-$(CONFIG_S3C2410_CPUFREQ) += cpufreq-s3c2410.o obj-$(CONFIG_S3C2410_DMA) += dma-s3c2410.o obj-$(CONFIG_S3C2410_PLL) += pll-s3c2410.o obj-$(CONFIG_S3C2410_PM) += pm-s3c2410.o sleep-s3c2410.o obj-$(CONFIG_CPU_S3C2412) += s3c2412.o clock-s3c2412.o -obj-$(CONFIG_S3C2412_CPUFREQ) += cpufreq-s3c2412.o obj-$(CONFIG_S3C2412_DMA) += dma-s3c2412.o obj-$(CONFIG_S3C2412_PM) += pm-s3c2412.o obj-$(CONFIG_S3C2412_PM_SLEEP) += sleep-s3c2412.o @@ -34,7 +32,6 @@ obj-$(CONFIG_S3C2416_PM) += pm-s3c2416.o obj-$(CONFIG_CPU_S3C2440) += s3c2440.o clock-s3c2440.o obj-$(CONFIG_CPU_S3C2442) += s3c2442.o obj-$(CONFIG_CPU_S3C244X) += s3c244x.o clock-s3c244x.o -obj-$(CONFIG_S3C2440_CPUFREQ) += cpufreq-s3c2440.o obj-$(CONFIG_S3C2440_DMA) += dma-s3c2440.o obj-$(CONFIG_S3C2440_PLL_12000000) += pll-s3c2440-12000000.o obj-$(CONFIG_S3C2440_PLL_16934400) += pll-s3c2440-16934400.o @@ -59,9 +56,6 @@ obj-$(CONFIG_S3C2412_IOTIMING) += iotiming-s3c2412.o obj-$(CONFIG_S3C2443_COMMON) += common-s3c2443.o obj-$(CONFIG_S3C2443_DMA) += dma-s3c2443.o -obj-$(CONFIG_CPU_FREQ_S3C24XX) += cpufreq.o -obj-$(CONFIG_CPU_FREQ_S3C24XX_DEBUGFS) += cpufreq-debugfs.o - # # machine support # following is ordered alphabetically by option text. diff --git a/arch/arm/mach-s3c24xx/cpufreq-debugfs.c b/arch/arm/mach-s3c24xx/cpufreq-debugfs.c deleted file mode 100644 index 9b7b4289d66c..000000000000 --- a/arch/arm/mach-s3c24xx/cpufreq-debugfs.c +++ /dev/null @@ -1,198 +0,0 @@ -/* - * Copyright (c) 2009 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks - * - * S3C24XX CPU Frequency scaling - debugfs status support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include -#include -#include -#include -#include -#include -#include -#include - -#include - -static struct dentry *dbgfs_root; -static struct dentry *dbgfs_file_io; -static struct dentry *dbgfs_file_info; -static struct dentry *dbgfs_file_board; - -#define print_ns(x) ((x) / 10), ((x) % 10) - -static void show_max(struct seq_file *seq, struct s3c_freq *f) -{ - seq_printf(seq, "MAX: F=%lu, H=%lu, P=%lu, A=%lu\n", - f->fclk, f->hclk, f->pclk, f->armclk); -} - -static int board_show(struct seq_file *seq, void *p) -{ - struct s3c_cpufreq_config *cfg; - struct s3c_cpufreq_board *brd; - - cfg = s3c_cpufreq_getconfig(); - if (!cfg) { - seq_printf(seq, "no configuration registered\n"); - return 0; - } - - brd = cfg->board; - if (!brd) { - seq_printf(seq, "no board definition set?\n"); - return 0; - } - - seq_printf(seq, "SDRAM refresh %u ns\n", brd->refresh); - seq_printf(seq, "auto_io=%u\n", brd->auto_io); - seq_printf(seq, "need_io=%u\n", brd->need_io); - - show_max(seq, &brd->max); - - - return 0; -} - -static int fops_board_open(struct inode *inode, struct file *file) -{ - return single_open(file, board_show, NULL); -} - -static const struct file_operations fops_board = { - .open = fops_board_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, - .owner = THIS_MODULE, -}; - -static int info_show(struct seq_file *seq, void *p) -{ - struct s3c_cpufreq_config *cfg; - - cfg = s3c_cpufreq_getconfig(); - if (!cfg) { - seq_printf(seq, "no configuration registered\n"); - return 0; - } - - seq_printf(seq, " FCLK %ld Hz\n", cfg->freq.fclk); - seq_printf(seq, " HCLK %ld Hz (%lu.%lu ns)\n", - cfg->freq.hclk, print_ns(cfg->freq.hclk_tns)); - seq_printf(seq, " PCLK %ld Hz\n", cfg->freq.hclk); - seq_printf(seq, "ARMCLK %ld Hz\n", cfg->freq.armclk); - seq_printf(seq, "\n"); - - show_max(seq, &cfg->max); - - seq_printf(seq, "Divisors: P=%d, H=%d, A=%d, dvs=%s\n", - cfg->divs.h_divisor, cfg->divs.p_divisor, - cfg->divs.arm_divisor, cfg->divs.dvs ? "on" : "off"); - seq_printf(seq, "\n"); - - seq_printf(seq, "lock_pll=%u\n", cfg->lock_pll); - - return 0; -} - -static int fops_info_open(struct inode *inode, struct file *file) -{ - return single_open(file, info_show, NULL); -} - -static const struct file_operations fops_info = { - .open = fops_info_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, - .owner = THIS_MODULE, -}; - -static int io_show(struct seq_file *seq, void *p) -{ - void (*show_bank)(struct seq_file *, struct s3c_cpufreq_config *, union s3c_iobank *); - struct s3c_cpufreq_config *cfg; - struct s3c_iotimings *iot; - union s3c_iobank *iob; - int bank; - - cfg = s3c_cpufreq_getconfig(); - if (!cfg) { - seq_printf(seq, "no configuration registered\n"); - return 0; - } - - show_bank = cfg->info->debug_io_show; - if (!show_bank) { - seq_printf(seq, "no code to show bank timing\n"); - return 0; - } - - iot = s3c_cpufreq_getiotimings(); - if (!iot) { - seq_printf(seq, "no io timings registered\n"); - return 0; - } - - seq_printf(seq, "hclk period is %lu.%lu ns\n", print_ns(cfg->freq.hclk_tns)); - - for (bank = 0; bank < MAX_BANKS; bank++) { - iob = &iot->bank[bank]; - - seq_printf(seq, "bank %d: ", bank); - - if (!iob->io_2410) { - seq_printf(seq, "nothing set\n"); - continue; - } - - show_bank(seq, cfg, iob); - } - - return 0; -} - -static int fops_io_open(struct inode *inode, struct file *file) -{ - return single_open(file, io_show, NULL); -} - -static const struct file_operations fops_io = { - .open = fops_io_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, - .owner = THIS_MODULE, -}; - - -static int __init s3c_freq_debugfs_init(void) -{ - dbgfs_root = debugfs_create_dir("s3c-cpufreq", NULL); - if (IS_ERR(dbgfs_root)) { - printk(KERN_ERR "%s: error creating debugfs root\n", __func__); - return PTR_ERR(dbgfs_root); - } - - dbgfs_file_io = debugfs_create_file("io-timing", S_IRUGO, dbgfs_root, - NULL, &fops_io); - - dbgfs_file_info = debugfs_create_file("info", S_IRUGO, dbgfs_root, - NULL, &fops_info); - - dbgfs_file_board = debugfs_create_file("board", S_IRUGO, dbgfs_root, - NULL, &fops_board); - - return 0; -} - -late_initcall(s3c_freq_debugfs_init); - diff --git a/arch/arm/mach-s3c24xx/cpufreq-s3c2410.c b/arch/arm/mach-s3c24xx/cpufreq-s3c2410.c deleted file mode 100644 index cfa0dd8723ec..000000000000 --- a/arch/arm/mach-s3c24xx/cpufreq-s3c2410.c +++ /dev/null @@ -1,160 +0,0 @@ -/* - * Copyright (c) 2006-2008 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks - * - * S3C2410 CPU Frequency scaling - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include - -#include - -#include -#include -#include - -/* Note, 2410A has an extra mode for 1:4:4 ratio, bit 2 of CLKDIV */ - -static void s3c2410_cpufreq_setdivs(struct s3c_cpufreq_config *cfg) -{ - u32 clkdiv = 0; - - if (cfg->divs.h_divisor == 2) - clkdiv |= S3C2410_CLKDIVN_HDIVN; - - if (cfg->divs.p_divisor != cfg->divs.h_divisor) - clkdiv |= S3C2410_CLKDIVN_PDIVN; - - __raw_writel(clkdiv, S3C2410_CLKDIVN); -} - -static int s3c2410_cpufreq_calcdivs(struct s3c_cpufreq_config *cfg) -{ - unsigned long hclk, fclk, pclk; - unsigned int hdiv, pdiv; - unsigned long hclk_max; - - fclk = cfg->freq.fclk; - hclk_max = cfg->max.hclk; - - cfg->freq.armclk = fclk; - - s3c_freq_dbg("%s: fclk is %lu, max hclk %lu\n", - __func__, fclk, hclk_max); - - hdiv = (fclk > cfg->max.hclk) ? 2 : 1; - hclk = fclk / hdiv; - - if (hclk > cfg->max.hclk) { - s3c_freq_dbg("%s: hclk too big\n", __func__); - return -EINVAL; - } - - pdiv = (hclk > cfg->max.pclk) ? 2 : 1; - pclk = hclk / pdiv; - - if (pclk > cfg->max.pclk) { - s3c_freq_dbg("%s: pclk too big\n", __func__); - return -EINVAL; - } - - pdiv *= hdiv; - - /* record the result */ - cfg->divs.p_divisor = pdiv; - cfg->divs.h_divisor = hdiv; - - return 0; -} - -static struct s3c_cpufreq_info s3c2410_cpufreq_info = { - .max = { - .fclk = 200000000, - .hclk = 100000000, - .pclk = 50000000, - }, - - /* transition latency is about 5ms worst-case, so - * set 10ms to be sure */ - .latency = 10000000, - - .locktime_m = 150, - .locktime_u = 150, - .locktime_bits = 12, - - .need_pll = 1, - - .name = "s3c2410", - .calc_iotiming = s3c2410_iotiming_calc, - .set_iotiming = s3c2410_iotiming_set, - .get_iotiming = s3c2410_iotiming_get, - .resume_clocks = s3c2410_setup_clocks, - - .set_fvco = s3c2410_set_fvco, - .set_refresh = s3c2410_cpufreq_setrefresh, - .set_divs = s3c2410_cpufreq_setdivs, - .calc_divs = s3c2410_cpufreq_calcdivs, - - .debug_io_show = s3c_cpufreq_debugfs_call(s3c2410_iotiming_debugfs), -}; - -static int s3c2410_cpufreq_add(struct device *dev, - struct subsys_interface *sif) -{ - return s3c_cpufreq_register(&s3c2410_cpufreq_info); -} - -static struct subsys_interface s3c2410_cpufreq_interface = { - .name = "s3c2410_cpufreq", - .subsys = &s3c2410_subsys, - .add_dev = s3c2410_cpufreq_add, -}; - -static int __init s3c2410_cpufreq_init(void) -{ - return subsys_interface_register(&s3c2410_cpufreq_interface); -} -arch_initcall(s3c2410_cpufreq_init); - -static int s3c2410a_cpufreq_add(struct device *dev, - struct subsys_interface *sif) -{ - /* alter the maximum freq settings for S3C2410A. If a board knows - * it only has a maximum of 200, then it should register its own - * limits. */ - - s3c2410_cpufreq_info.max.fclk = 266000000; - s3c2410_cpufreq_info.max.hclk = 133000000; - s3c2410_cpufreq_info.max.pclk = 66500000; - s3c2410_cpufreq_info.name = "s3c2410a"; - - return s3c2410_cpufreq_add(dev, sif); -} - -static struct subsys_interface s3c2410a_cpufreq_interface = { - .name = "s3c2410a_cpufreq", - .subsys = &s3c2410a_subsys, - .add_dev = s3c2410a_cpufreq_add, -}; - -static int __init s3c2410a_cpufreq_init(void) -{ - return subsys_interface_register(&s3c2410a_cpufreq_interface); -} -arch_initcall(s3c2410a_cpufreq_init); diff --git a/arch/arm/mach-s3c24xx/cpufreq-s3c2412.c b/arch/arm/mach-s3c24xx/cpufreq-s3c2412.c deleted file mode 100644 index 8bf0f3a77476..000000000000 --- a/arch/arm/mach-s3c24xx/cpufreq-s3c2412.c +++ /dev/null @@ -1,258 +0,0 @@ -/* - * Copyright 2008 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks - * - * S3C2412 CPU Frequency scalling - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include - -#include - -#include -#include -#include - -#include "s3c2412.h" - -/* our clock resources. */ -static struct clk *xtal; -static struct clk *fclk; -static struct clk *hclk; -static struct clk *armclk; - -/* HDIV: 1, 2, 3, 4, 6, 8 */ - -static int s3c2412_cpufreq_calcdivs(struct s3c_cpufreq_config *cfg) -{ - unsigned int hdiv, pdiv, armdiv, dvs; - unsigned long hclk, fclk, armclk, armdiv_clk; - unsigned long hclk_max; - - fclk = cfg->freq.fclk; - armclk = cfg->freq.armclk; - hclk_max = cfg->max.hclk; - - /* We can't run hclk above armclk as at the best we have to - * have armclk and hclk in dvs mode. */ - - if (hclk_max > armclk) - hclk_max = armclk; - - s3c_freq_dbg("%s: fclk=%lu, armclk=%lu, hclk_max=%lu\n", - __func__, fclk, armclk, hclk_max); - s3c_freq_dbg("%s: want f=%lu, arm=%lu, h=%lu, p=%lu\n", - __func__, cfg->freq.fclk, cfg->freq.armclk, - cfg->freq.hclk, cfg->freq.pclk); - - armdiv = fclk / armclk; - - if (armdiv < 1) - armdiv = 1; - if (armdiv > 2) - armdiv = 2; - - cfg->divs.arm_divisor = armdiv; - armdiv_clk = fclk / armdiv; - - hdiv = armdiv_clk / hclk_max; - if (hdiv < 1) - hdiv = 1; - - cfg->freq.hclk = hclk = armdiv_clk / hdiv; - - /* set dvs depending on whether we reached armclk or not. */ - cfg->divs.dvs = dvs = armclk < armdiv_clk; - - /* update the actual armclk we achieved. */ - cfg->freq.armclk = dvs ? hclk : armdiv_clk; - - s3c_freq_dbg("%s: armclk %lu, hclk %lu, armdiv %d, hdiv %d, dvs %d\n", - __func__, armclk, hclk, armdiv, hdiv, cfg->divs.dvs); - - if (hdiv > 4) - goto invalid; - - pdiv = (hclk > cfg->max.pclk) ? 2 : 1; - - if ((hclk / pdiv) > cfg->max.pclk) - pdiv++; - - cfg->freq.pclk = hclk / pdiv; - - s3c_freq_dbg("%s: pdiv %d\n", __func__, pdiv); - - if (pdiv > 2) - goto invalid; - - pdiv *= hdiv; - - /* store the result, and then return */ - - cfg->divs.h_divisor = hdiv * armdiv; - cfg->divs.p_divisor = pdiv * armdiv; - - return 0; - -invalid: - return -EINVAL; -} - -static void s3c2412_cpufreq_setdivs(struct s3c_cpufreq_config *cfg) -{ - unsigned long clkdiv; - unsigned long olddiv; - - olddiv = clkdiv = __raw_readl(S3C2410_CLKDIVN); - - /* clear off current clock info */ - - clkdiv &= ~S3C2412_CLKDIVN_ARMDIVN; - clkdiv &= ~S3C2412_CLKDIVN_HDIVN_MASK; - clkdiv &= ~S3C2412_CLKDIVN_PDIVN; - - if (cfg->divs.arm_divisor == 2) - clkdiv |= S3C2412_CLKDIVN_ARMDIVN; - - clkdiv |= ((cfg->divs.h_divisor / cfg->divs.arm_divisor) - 1); - - if (cfg->divs.p_divisor != cfg->divs.h_divisor) - clkdiv |= S3C2412_CLKDIVN_PDIVN; - - s3c_freq_dbg("%s: div %08lx => %08lx\n", __func__, olddiv, clkdiv); - __raw_writel(clkdiv, S3C2410_CLKDIVN); - - clk_set_parent(armclk, cfg->divs.dvs ? hclk : fclk); -} - -static void s3c2412_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg) -{ - struct s3c_cpufreq_board *board = cfg->board; - unsigned long refresh; - - s3c_freq_dbg("%s: refresh %u ns, hclk %lu\n", __func__, - board->refresh, cfg->freq.hclk); - - /* Reduce both the refresh time (in ns) and the frequency (in MHz) - * by 10 each to ensure that we do not overflow 32 bit numbers. This - * should work for HCLK up to 133MHz and refresh period up to 30usec. - */ - - refresh = (board->refresh / 10); - refresh *= (cfg->freq.hclk / 100); - refresh /= (1 * 1000 * 1000); /* 10^6 */ - - s3c_freq_dbg("%s: setting refresh 0x%08lx\n", __func__, refresh); - __raw_writel(refresh, S3C2412_REFRESH); -} - -/* set the default cpu frequency information, based on an 200MHz part - * as we have no other way of detecting the speed rating in software. - */ - -static struct s3c_cpufreq_info s3c2412_cpufreq_info = { - .max = { - .fclk = 200000000, - .hclk = 100000000, - .pclk = 50000000, - }, - - .latency = 5000000, /* 5ms */ - - .locktime_m = 150, - .locktime_u = 150, - .locktime_bits = 16, - - .name = "s3c2412", - .set_refresh = s3c2412_cpufreq_setrefresh, - .set_divs = s3c2412_cpufreq_setdivs, - .calc_divs = s3c2412_cpufreq_calcdivs, - - .calc_iotiming = s3c2412_iotiming_calc, - .set_iotiming = s3c2412_iotiming_set, - .get_iotiming = s3c2412_iotiming_get, - - .resume_clocks = s3c2412_setup_clocks, - - .debug_io_show = s3c_cpufreq_debugfs_call(s3c2412_iotiming_debugfs), -}; - -static int s3c2412_cpufreq_add(struct device *dev, - struct subsys_interface *sif) -{ - unsigned long fclk_rate; - - hclk = clk_get(NULL, "hclk"); - if (IS_ERR(hclk)) { - printk(KERN_ERR "%s: cannot find hclk clock\n", __func__); - return -ENOENT; - } - - fclk = clk_get(NULL, "fclk"); - if (IS_ERR(fclk)) { - printk(KERN_ERR "%s: cannot find fclk clock\n", __func__); - goto err_fclk; - } - - fclk_rate = clk_get_rate(fclk); - if (fclk_rate > 200000000) { - printk(KERN_INFO - "%s: fclk %ld MHz, assuming 266MHz capable part\n", - __func__, fclk_rate / 1000000); - s3c2412_cpufreq_info.max.fclk = 266000000; - s3c2412_cpufreq_info.max.hclk = 133000000; - s3c2412_cpufreq_info.max.pclk = 66000000; - } - - armclk = clk_get(NULL, "armclk"); - if (IS_ERR(armclk)) { - printk(KERN_ERR "%s: cannot find arm clock\n", __func__); - goto err_armclk; - } - - xtal = clk_get(NULL, "xtal"); - if (IS_ERR(xtal)) { - printk(KERN_ERR "%s: cannot find xtal clock\n", __func__); - goto err_xtal; - } - - return s3c_cpufreq_register(&s3c2412_cpufreq_info); - -err_xtal: - clk_put(armclk); -err_armclk: - clk_put(fclk); -err_fclk: - clk_put(hclk); - - return -ENOENT; -} - -static struct subsys_interface s3c2412_cpufreq_interface = { - .name = "s3c2412_cpufreq", - .subsys = &s3c2412_subsys, - .add_dev = s3c2412_cpufreq_add, -}; - -static int s3c2412_cpufreq_init(void) -{ - return subsys_interface_register(&s3c2412_cpufreq_interface); -} -arch_initcall(s3c2412_cpufreq_init); diff --git a/arch/arm/mach-s3c24xx/cpufreq-s3c2440.c b/arch/arm/mach-s3c24xx/cpufreq-s3c2440.c deleted file mode 100644 index 72b2cc8a5a85..000000000000 --- a/arch/arm/mach-s3c24xx/cpufreq-s3c2440.c +++ /dev/null @@ -1,312 +0,0 @@ -/* - * Copyright (c) 2006-2009 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks - * Vincent Sanders - * - * S3C2440/S3C2442 CPU Frequency scaling - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include - -#include -#include - -#include - -#include -#include -#include - -static struct clk *xtal; -static struct clk *fclk; -static struct clk *hclk; -static struct clk *armclk; - -/* HDIV: 1, 2, 3, 4, 6, 8 */ - -static inline int within_khz(unsigned long a, unsigned long b) -{ - long diff = a - b; - - return (diff >= -1000 && diff <= 1000); -} - -/** - * s3c2440_cpufreq_calcdivs - calculate divider settings - * @cfg: The cpu frequency settings. - * - * Calcualte the divider values for the given frequency settings - * specified in @cfg. The values are stored in @cfg for later use - * by the relevant set routine if the request settings can be reached. - */ -int s3c2440_cpufreq_calcdivs(struct s3c_cpufreq_config *cfg) -{ - unsigned int hdiv, pdiv; - unsigned long hclk, fclk, armclk; - unsigned long hclk_max; - - fclk = cfg->freq.fclk; - armclk = cfg->freq.armclk; - hclk_max = cfg->max.hclk; - - s3c_freq_dbg("%s: fclk is %lu, armclk %lu, max hclk %lu\n", - __func__, fclk, armclk, hclk_max); - - if (armclk > fclk) { - printk(KERN_WARNING "%s: armclk > fclk\n", __func__); - armclk = fclk; - } - - /* if we are in DVS, we need HCLK to be <= ARMCLK */ - if (armclk < fclk && armclk < hclk_max) - hclk_max = armclk; - - for (hdiv = 1; hdiv < 9; hdiv++) { - if (hdiv == 5 || hdiv == 7) - hdiv++; - - hclk = (fclk / hdiv); - if (hclk <= hclk_max || within_khz(hclk, hclk_max)) - break; - } - - s3c_freq_dbg("%s: hclk %lu, div %d\n", __func__, hclk, hdiv); - - if (hdiv > 8) - goto invalid; - - pdiv = (hclk > cfg->max.pclk) ? 2 : 1; - - if ((hclk / pdiv) > cfg->max.pclk) - pdiv++; - - s3c_freq_dbg("%s: pdiv %d\n", __func__, pdiv); - - if (pdiv > 2) - goto invalid; - - pdiv *= hdiv; - - /* calculate a valid armclk */ - - if (armclk < hclk) - armclk = hclk; - - /* if we're running armclk lower than fclk, this really means - * that the system should go into dvs mode, which means that - * armclk is connected to hclk. */ - if (armclk < fclk) { - cfg->divs.dvs = 1; - armclk = hclk; - } else - cfg->divs.dvs = 0; - - cfg->freq.armclk = armclk; - - /* store the result, and then return */ - - cfg->divs.h_divisor = hdiv; - cfg->divs.p_divisor = pdiv; - - return 0; - - invalid: - return -EINVAL; -} - -#define CAMDIVN_HCLK_HALF (S3C2440_CAMDIVN_HCLK3_HALF | \ - S3C2440_CAMDIVN_HCLK4_HALF) - -/** - * s3c2440_cpufreq_setdivs - set the cpu frequency divider settings - * @cfg: The cpu frequency settings. - * - * Set the divisors from the settings in @cfg, which where generated - * during the calculation phase by s3c2440_cpufreq_calcdivs(). - */ -static void s3c2440_cpufreq_setdivs(struct s3c_cpufreq_config *cfg) -{ - unsigned long clkdiv, camdiv; - - s3c_freq_dbg("%s: divsiors: h=%d, p=%d\n", __func__, - cfg->divs.h_divisor, cfg->divs.p_divisor); - - clkdiv = __raw_readl(S3C2410_CLKDIVN); - camdiv = __raw_readl(S3C2440_CAMDIVN); - - clkdiv &= ~(S3C2440_CLKDIVN_HDIVN_MASK | S3C2440_CLKDIVN_PDIVN); - camdiv &= ~CAMDIVN_HCLK_HALF; - - switch (cfg->divs.h_divisor) { - case 1: - clkdiv |= S3C2440_CLKDIVN_HDIVN_1; - break; - - case 2: - clkdiv |= S3C2440_CLKDIVN_HDIVN_2; - break; - - case 6: - camdiv |= S3C2440_CAMDIVN_HCLK3_HALF; - case 3: - clkdiv |= S3C2440_CLKDIVN_HDIVN_3_6; - break; - - case 8: - camdiv |= S3C2440_CAMDIVN_HCLK4_HALF; - case 4: - clkdiv |= S3C2440_CLKDIVN_HDIVN_4_8; - break; - - default: - BUG(); /* we don't expect to get here. */ - } - - if (cfg->divs.p_divisor != cfg->divs.h_divisor) - clkdiv |= S3C2440_CLKDIVN_PDIVN; - - /* todo - set pclk. */ - - /* Write the divisors first with hclk intentionally halved so that - * when we write clkdiv we will under-frequency instead of over. We - * then make a short delay and remove the hclk halving if necessary. - */ - - __raw_writel(camdiv | CAMDIVN_HCLK_HALF, S3C2440_CAMDIVN); - __raw_writel(clkdiv, S3C2410_CLKDIVN); - - ndelay(20); - __raw_writel(camdiv, S3C2440_CAMDIVN); - - clk_set_parent(armclk, cfg->divs.dvs ? hclk : fclk); -} - -static int run_freq_for(unsigned long max_hclk, unsigned long fclk, - int *divs, - struct cpufreq_frequency_table *table, - size_t table_size) -{ - unsigned long freq; - int index = 0; - int div; - - for (div = *divs; div > 0; div = *divs++) { - freq = fclk / div; - - if (freq > max_hclk && div != 1) - continue; - - freq /= 1000; /* table is in kHz */ - index = s3c_cpufreq_addfreq(table, index, table_size, freq); - if (index < 0) - break; - } - - return index; -} - -static int hclk_divs[] = { 1, 2, 3, 4, 6, 8, -1 }; - -static int s3c2440_cpufreq_calctable(struct s3c_cpufreq_config *cfg, - struct cpufreq_frequency_table *table, - size_t table_size) -{ - int ret; - - WARN_ON(cfg->info == NULL); - WARN_ON(cfg->board == NULL); - - ret = run_freq_for(cfg->info->max.hclk, - cfg->info->max.fclk, - hclk_divs, - table, table_size); - - s3c_freq_dbg("%s: returning %d\n", __func__, ret); - - return ret; -} - -struct s3c_cpufreq_info s3c2440_cpufreq_info = { - .max = { - .fclk = 400000000, - .hclk = 133333333, - .pclk = 66666666, - }, - - .locktime_m = 300, - .locktime_u = 300, - .locktime_bits = 16, - - .name = "s3c244x", - .calc_iotiming = s3c2410_iotiming_calc, - .set_iotiming = s3c2410_iotiming_set, - .get_iotiming = s3c2410_iotiming_get, - .set_fvco = s3c2410_set_fvco, - - .set_refresh = s3c2410_cpufreq_setrefresh, - .set_divs = s3c2440_cpufreq_setdivs, - .calc_divs = s3c2440_cpufreq_calcdivs, - .calc_freqtable = s3c2440_cpufreq_calctable, - - .resume_clocks = s3c244x_setup_clocks, - - .debug_io_show = s3c_cpufreq_debugfs_call(s3c2410_iotiming_debugfs), -}; - -static int s3c2440_cpufreq_add(struct device *dev, - struct subsys_interface *sif) -{ - xtal = s3c_cpufreq_clk_get(NULL, "xtal"); - hclk = s3c_cpufreq_clk_get(NULL, "hclk"); - fclk = s3c_cpufreq_clk_get(NULL, "fclk"); - armclk = s3c_cpufreq_clk_get(NULL, "armclk"); - - if (IS_ERR(xtal) || IS_ERR(hclk) || IS_ERR(fclk) || IS_ERR(armclk)) { - printk(KERN_ERR "%s: failed to get clocks\n", __func__); - return -ENOENT; - } - - return s3c_cpufreq_register(&s3c2440_cpufreq_info); -} - -static struct subsys_interface s3c2440_cpufreq_interface = { - .name = "s3c2440_cpufreq", - .subsys = &s3c2440_subsys, - .add_dev = s3c2440_cpufreq_add, -}; - -static int s3c2440_cpufreq_init(void) -{ - return subsys_interface_register(&s3c2440_cpufreq_interface); -} - -/* arch_initcall adds the clocks we need, so use subsys_initcall. */ -subsys_initcall(s3c2440_cpufreq_init); - -static struct subsys_interface s3c2442_cpufreq_interface = { - .name = "s3c2442_cpufreq", - .subsys = &s3c2442_subsys, - .add_dev = s3c2440_cpufreq_add, -}; - -static int s3c2442_cpufreq_init(void) -{ - return subsys_interface_register(&s3c2442_cpufreq_interface); -} -subsys_initcall(s3c2442_cpufreq_init); diff --git a/arch/arm/mach-s3c24xx/cpufreq.c b/arch/arm/mach-s3c24xx/cpufreq.c deleted file mode 100644 index 3c0e78ede0da..000000000000 --- a/arch/arm/mach-s3c24xx/cpufreq.c +++ /dev/null @@ -1,711 +0,0 @@ -/* - * Copyright (c) 2006-2008 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks - * - * S3C24XX CPU Frequency scaling - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include - -#include -#include -#include - -#include - -/* note, cpufreq support deals in kHz, no Hz */ - -static struct cpufreq_driver s3c24xx_driver; -static struct s3c_cpufreq_config cpu_cur; -static struct s3c_iotimings s3c24xx_iotiming; -static struct cpufreq_frequency_table *pll_reg; -static unsigned int last_target = ~0; -static unsigned int ftab_size; -static struct cpufreq_frequency_table *ftab; - -static struct clk *_clk_mpll; -static struct clk *_clk_xtal; -static struct clk *clk_fclk; -static struct clk *clk_hclk; -static struct clk *clk_pclk; -static struct clk *clk_arm; - -#ifdef CONFIG_CPU_FREQ_S3C24XX_DEBUGFS -struct s3c_cpufreq_config *s3c_cpufreq_getconfig(void) -{ - return &cpu_cur; -} - -struct s3c_iotimings *s3c_cpufreq_getiotimings(void) -{ - return &s3c24xx_iotiming; -} -#endif /* CONFIG_CPU_FREQ_S3C24XX_DEBUGFS */ - -static void s3c_cpufreq_getcur(struct s3c_cpufreq_config *cfg) -{ - unsigned long fclk, pclk, hclk, armclk; - - cfg->freq.fclk = fclk = clk_get_rate(clk_fclk); - cfg->freq.hclk = hclk = clk_get_rate(clk_hclk); - cfg->freq.pclk = pclk = clk_get_rate(clk_pclk); - cfg->freq.armclk = armclk = clk_get_rate(clk_arm); - - cfg->pll.index = __raw_readl(S3C2410_MPLLCON); - cfg->pll.frequency = fclk; - - cfg->freq.hclk_tns = 1000000000 / (cfg->freq.hclk / 10); - - cfg->divs.h_divisor = fclk / hclk; - cfg->divs.p_divisor = fclk / pclk; -} - -static inline void s3c_cpufreq_calc(struct s3c_cpufreq_config *cfg) -{ - unsigned long pll = cfg->pll.frequency; - - cfg->freq.fclk = pll; - cfg->freq.hclk = pll / cfg->divs.h_divisor; - cfg->freq.pclk = pll / cfg->divs.p_divisor; - - /* convert hclk into 10ths of nanoseconds for io calcs */ - cfg->freq.hclk_tns = 1000000000 / (cfg->freq.hclk / 10); -} - -static inline int closer(unsigned int target, unsigned int n, unsigned int c) -{ - int diff_cur = abs(target - c); - int diff_new = abs(target - n); - - return (diff_new < diff_cur); -} - -static void s3c_cpufreq_show(const char *pfx, - struct s3c_cpufreq_config *cfg) -{ - s3c_freq_dbg("%s: Fvco=%u, F=%lu, A=%lu, H=%lu (%u), P=%lu (%u)\n", - pfx, cfg->pll.frequency, cfg->freq.fclk, cfg->freq.armclk, - cfg->freq.hclk, cfg->divs.h_divisor, - cfg->freq.pclk, cfg->divs.p_divisor); -} - -/* functions to wrapper the driver info calls to do the cpu specific work */ - -static void s3c_cpufreq_setio(struct s3c_cpufreq_config *cfg) -{ - if (cfg->info->set_iotiming) - (cfg->info->set_iotiming)(cfg, &s3c24xx_iotiming); -} - -static int s3c_cpufreq_calcio(struct s3c_cpufreq_config *cfg) -{ - if (cfg->info->calc_iotiming) - return (cfg->info->calc_iotiming)(cfg, &s3c24xx_iotiming); - - return 0; -} - -static void s3c_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg) -{ - (cfg->info->set_refresh)(cfg); -} - -static void s3c_cpufreq_setdivs(struct s3c_cpufreq_config *cfg) -{ - (cfg->info->set_divs)(cfg); -} - -static int s3c_cpufreq_calcdivs(struct s3c_cpufreq_config *cfg) -{ - return (cfg->info->calc_divs)(cfg); -} - -static void s3c_cpufreq_setfvco(struct s3c_cpufreq_config *cfg) -{ - (cfg->info->set_fvco)(cfg); -} - -static inline void s3c_cpufreq_resume_clocks(void) -{ - cpu_cur.info->resume_clocks(); -} - -static inline void s3c_cpufreq_updateclk(struct clk *clk, - unsigned int freq) -{ - clk_set_rate(clk, freq); -} - -static int s3c_cpufreq_settarget(struct cpufreq_policy *policy, - unsigned int target_freq, - struct cpufreq_frequency_table *pll) -{ - struct s3c_cpufreq_freqs freqs; - struct s3c_cpufreq_config cpu_new; - unsigned long flags; - - cpu_new = cpu_cur; /* copy new from current */ - - s3c_cpufreq_show("cur", &cpu_cur); - - /* TODO - check for DMA currently outstanding */ - - cpu_new.pll = pll ? *pll : cpu_cur.pll; - - if (pll) - freqs.pll_changing = 1; - - /* update our frequencies */ - - cpu_new.freq.armclk = target_freq; - cpu_new.freq.fclk = cpu_new.pll.frequency; - - if (s3c_cpufreq_calcdivs(&cpu_new) < 0) { - printk(KERN_ERR "no divisors for %d\n", target_freq); - goto err_notpossible; - } - - s3c_freq_dbg("%s: got divs\n", __func__); - - s3c_cpufreq_calc(&cpu_new); - - s3c_freq_dbg("%s: calculated frequencies for new\n", __func__); - - if (cpu_new.freq.hclk != cpu_cur.freq.hclk) { - if (s3c_cpufreq_calcio(&cpu_new) < 0) { - printk(KERN_ERR "%s: no IO timings\n", __func__); - goto err_notpossible; - } - } - - s3c_cpufreq_show("new", &cpu_new); - - /* setup our cpufreq parameters */ - - freqs.old = cpu_cur.freq; - freqs.new = cpu_new.freq; - - freqs.freqs.old = cpu_cur.freq.armclk / 1000; - freqs.freqs.new = cpu_new.freq.armclk / 1000; - - /* update f/h/p clock settings before we issue the change - * notification, so that drivers do not need to do anything - * special if they want to recalculate on CPUFREQ_PRECHANGE. */ - - s3c_cpufreq_updateclk(_clk_mpll, cpu_new.pll.frequency); - s3c_cpufreq_updateclk(clk_fclk, cpu_new.freq.fclk); - s3c_cpufreq_updateclk(clk_hclk, cpu_new.freq.hclk); - s3c_cpufreq_updateclk(clk_pclk, cpu_new.freq.pclk); - - /* start the frequency change */ - cpufreq_notify_transition(policy, &freqs.freqs, CPUFREQ_PRECHANGE); - - /* If hclk is staying the same, then we do not need to - * re-write the IO or the refresh timings whilst we are changing - * speed. */ - - local_irq_save(flags); - - /* is our memory clock slowing down? */ - if (cpu_new.freq.hclk < cpu_cur.freq.hclk) { - s3c_cpufreq_setrefresh(&cpu_new); - s3c_cpufreq_setio(&cpu_new); - } - - if (cpu_new.freq.fclk == cpu_cur.freq.fclk) { - /* not changing PLL, just set the divisors */ - - s3c_cpufreq_setdivs(&cpu_new); - } else { - if (cpu_new.freq.fclk < cpu_cur.freq.fclk) { - /* slow the cpu down, then set divisors */ - - s3c_cpufreq_setfvco(&cpu_new); - s3c_cpufreq_setdivs(&cpu_new); - } else { - /* set the divisors, then speed up */ - - s3c_cpufreq_setdivs(&cpu_new); - s3c_cpufreq_setfvco(&cpu_new); - } - } - - /* did our memory clock speed up */ - if (cpu_new.freq.hclk > cpu_cur.freq.hclk) { - s3c_cpufreq_setrefresh(&cpu_new); - s3c_cpufreq_setio(&cpu_new); - } - - /* update our current settings */ - cpu_cur = cpu_new; - - local_irq_restore(flags); - - /* notify everyone we've done this */ - cpufreq_notify_transition(policy, &freqs.freqs, CPUFREQ_POSTCHANGE); - - s3c_freq_dbg("%s: finished\n", __func__); - return 0; - - err_notpossible: - printk(KERN_ERR "no compatible settings for %d\n", target_freq); - return -EINVAL; -} - -/* s3c_cpufreq_target - * - * called by the cpufreq core to adjust the frequency that the CPU - * is currently running at. - */ - -static int s3c_cpufreq_target(struct cpufreq_policy *policy, - unsigned int target_freq, - unsigned int relation) -{ - struct cpufreq_frequency_table *pll; - unsigned int index; - - /* avoid repeated calls which cause a needless amout of duplicated - * logging output (and CPU time as the calculation process is - * done) */ - if (target_freq == last_target) - return 0; - - last_target = target_freq; - - s3c_freq_dbg("%s: policy %p, target %u, relation %u\n", - __func__, policy, target_freq, relation); - - if (ftab) { - if (cpufreq_frequency_table_target(policy, ftab, - target_freq, relation, - &index)) { - s3c_freq_dbg("%s: table failed\n", __func__); - return -EINVAL; - } - - s3c_freq_dbg("%s: adjust %d to entry %d (%u)\n", __func__, - target_freq, index, ftab[index].frequency); - target_freq = ftab[index].frequency; - } - - target_freq *= 1000; /* convert target to Hz */ - - /* find the settings for our new frequency */ - - if (!pll_reg || cpu_cur.lock_pll) { - /* either we've not got any PLL values, or we've locked - * to the current one. */ - pll = NULL; - } else { - struct cpufreq_policy tmp_policy; - int ret; - - /* we keep the cpu pll table in Hz, to ensure we get an - * accurate value for the PLL output. */ - - tmp_policy.min = policy->min * 1000; - tmp_policy.max = policy->max * 1000; - tmp_policy.cpu = policy->cpu; - - /* cpufreq_frequency_table_target uses a pointer to 'index' - * which is the number of the table entry, not the value of - * the table entry's index field. */ - - ret = cpufreq_frequency_table_target(&tmp_policy, pll_reg, - target_freq, relation, - &index); - - if (ret < 0) { - printk(KERN_ERR "%s: no PLL available\n", __func__); - goto err_notpossible; - } - - pll = pll_reg + index; - - s3c_freq_dbg("%s: target %u => %u\n", - __func__, target_freq, pll->frequency); - - target_freq = pll->frequency; - } - - return s3c_cpufreq_settarget(policy, target_freq, pll); - - err_notpossible: - printk(KERN_ERR "no compatible settings for %d\n", target_freq); - return -EINVAL; -} - -static unsigned int s3c_cpufreq_get(unsigned int cpu) -{ - return clk_get_rate(clk_arm) / 1000; -} - -struct clk *s3c_cpufreq_clk_get(struct device *dev, const char *name) -{ - struct clk *clk; - - clk = clk_get(dev, name); - if (IS_ERR(clk)) - printk(KERN_ERR "cpufreq: failed to get clock '%s'\n", name); - - return clk; -} - -static int s3c_cpufreq_init(struct cpufreq_policy *policy) -{ - printk(KERN_INFO "%s: initialising policy %p\n", __func__, policy); - - if (policy->cpu != 0) - return -EINVAL; - - policy->cur = s3c_cpufreq_get(0); - policy->min = policy->cpuinfo.min_freq = 0; - policy->max = policy->cpuinfo.max_freq = cpu_cur.info->max.fclk / 1000; - policy->governor = CPUFREQ_DEFAULT_GOVERNOR; - - /* feed the latency information from the cpu driver */ - policy->cpuinfo.transition_latency = cpu_cur.info->latency; - - if (ftab) - cpufreq_frequency_table_cpuinfo(policy, ftab); - - return 0; -} - -static __init int s3c_cpufreq_initclks(void) -{ - _clk_mpll = s3c_cpufreq_clk_get(NULL, "mpll"); - _clk_xtal = s3c_cpufreq_clk_get(NULL, "xtal"); - clk_fclk = s3c_cpufreq_clk_get(NULL, "fclk"); - clk_hclk = s3c_cpufreq_clk_get(NULL, "hclk"); - clk_pclk = s3c_cpufreq_clk_get(NULL, "pclk"); - clk_arm = s3c_cpufreq_clk_get(NULL, "armclk"); - - if (IS_ERR(clk_fclk) || IS_ERR(clk_hclk) || IS_ERR(clk_pclk) || - IS_ERR(_clk_mpll) || IS_ERR(clk_arm) || IS_ERR(_clk_xtal)) { - printk(KERN_ERR "%s: could not get clock(s)\n", __func__); - return -ENOENT; - } - - printk(KERN_INFO "%s: clocks f=%lu,h=%lu,p=%lu,a=%lu\n", __func__, - clk_get_rate(clk_fclk) / 1000, - clk_get_rate(clk_hclk) / 1000, - clk_get_rate(clk_pclk) / 1000, - clk_get_rate(clk_arm) / 1000); - - return 0; -} - -static int s3c_cpufreq_verify(struct cpufreq_policy *policy) -{ - if (policy->cpu != 0) - return -EINVAL; - - return 0; -} - -#ifdef CONFIG_PM -static struct cpufreq_frequency_table suspend_pll; -static unsigned int suspend_freq; - -static int s3c_cpufreq_suspend(struct cpufreq_policy *policy) -{ - suspend_pll.frequency = clk_get_rate(_clk_mpll); - suspend_pll.index = __raw_readl(S3C2410_MPLLCON); - suspend_freq = s3c_cpufreq_get(0) * 1000; - - return 0; -} - -static int s3c_cpufreq_resume(struct cpufreq_policy *policy) -{ - int ret; - - s3c_freq_dbg("%s: resuming with policy %p\n", __func__, policy); - - last_target = ~0; /* invalidate last_target setting */ - - /* first, find out what speed we resumed at. */ - s3c_cpufreq_resume_clocks(); - - /* whilst we will be called later on, we try and re-set the - * cpu frequencies as soon as possible so that we do not end - * up resuming devices and then immediately having to re-set - * a number of settings once these devices have restarted. - * - * as a note, it is expected devices are not used until they - * have been un-suspended and at that time they should have - * used the updated clock settings. - */ - - ret = s3c_cpufreq_settarget(NULL, suspend_freq, &suspend_pll); - if (ret) { - printk(KERN_ERR "%s: failed to reset pll/freq\n", __func__); - return ret; - } - - return 0; -} -#else -#define s3c_cpufreq_resume NULL -#define s3c_cpufreq_suspend NULL -#endif - -static struct cpufreq_driver s3c24xx_driver = { - .flags = CPUFREQ_STICKY, - .verify = s3c_cpufreq_verify, - .target = s3c_cpufreq_target, - .get = s3c_cpufreq_get, - .init = s3c_cpufreq_init, - .suspend = s3c_cpufreq_suspend, - .resume = s3c_cpufreq_resume, - .name = "s3c24xx", -}; - - -int __init s3c_cpufreq_register(struct s3c_cpufreq_info *info) -{ - if (!info || !info->name) { - printk(KERN_ERR "%s: failed to pass valid information\n", - __func__); - return -EINVAL; - } - - printk(KERN_INFO "S3C24XX CPU Frequency driver, %s cpu support\n", - info->name); - - /* check our driver info has valid data */ - - BUG_ON(info->set_refresh == NULL); - BUG_ON(info->set_divs == NULL); - BUG_ON(info->calc_divs == NULL); - - /* info->set_fvco is optional, depending on whether there - * is a need to set the clock code. */ - - cpu_cur.info = info; - - /* Note, driver registering should probably update locktime */ - - return 0; -} - -int __init s3c_cpufreq_setboard(struct s3c_cpufreq_board *board) -{ - struct s3c_cpufreq_board *ours; - - if (!board) { - printk(KERN_INFO "%s: no board data\n", __func__); - return -EINVAL; - } - - /* Copy the board information so that each board can make this - * initdata. */ - - ours = kzalloc(sizeof(struct s3c_cpufreq_board), GFP_KERNEL); - if (ours == NULL) { - printk(KERN_ERR "%s: no memory\n", __func__); - return -ENOMEM; - } - - *ours = *board; - cpu_cur.board = ours; - - return 0; -} - -int __init s3c_cpufreq_auto_io(void) -{ - int ret; - - if (!cpu_cur.info->get_iotiming) { - printk(KERN_ERR "%s: get_iotiming undefined\n", __func__); - return -ENOENT; - } - - printk(KERN_INFO "%s: working out IO settings\n", __func__); - - ret = (cpu_cur.info->get_iotiming)(&cpu_cur, &s3c24xx_iotiming); - if (ret) - printk(KERN_ERR "%s: failed to get timings\n", __func__); - - return ret; -} - -/* if one or is zero, then return the other, otherwise return the min */ -#define do_min(_a, _b) ((_a) == 0 ? (_b) : (_b) == 0 ? (_a) : min(_a, _b)) - -/** - * s3c_cpufreq_freq_min - find the minimum settings for the given freq. - * @dst: The destination structure - * @a: One argument. - * @b: The other argument. - * - * Create a minimum of each frequency entry in the 'struct s3c_freq', - * unless the entry is zero when it is ignored and the non-zero argument - * used. - */ -static void s3c_cpufreq_freq_min(struct s3c_freq *dst, - struct s3c_freq *a, struct s3c_freq *b) -{ - dst->fclk = do_min(a->fclk, b->fclk); - dst->hclk = do_min(a->hclk, b->hclk); - dst->pclk = do_min(a->pclk, b->pclk); - dst->armclk = do_min(a->armclk, b->armclk); -} - -static inline u32 calc_locktime(u32 freq, u32 time_us) -{ - u32 result; - - result = freq * time_us; - result = DIV_ROUND_UP(result, 1000 * 1000); - - return result; -} - -static void s3c_cpufreq_update_loctkime(void) -{ - unsigned int bits = cpu_cur.info->locktime_bits; - u32 rate = (u32)clk_get_rate(_clk_xtal); - u32 val; - - if (bits == 0) { - WARN_ON(1); - return; - } - - val = calc_locktime(rate, cpu_cur.info->locktime_u) << bits; - val |= calc_locktime(rate, cpu_cur.info->locktime_m); - - printk(KERN_INFO "%s: new locktime is 0x%08x\n", __func__, val); - __raw_writel(val, S3C2410_LOCKTIME); -} - -static int s3c_cpufreq_build_freq(void) -{ - int size, ret; - - if (!cpu_cur.info->calc_freqtable) - return -EINVAL; - - kfree(ftab); - ftab = NULL; - - size = cpu_cur.info->calc_freqtable(&cpu_cur, NULL, 0); - size++; - - ftab = kmalloc(sizeof(struct cpufreq_frequency_table) * size, GFP_KERNEL); - if (!ftab) { - printk(KERN_ERR "%s: no memory for tables\n", __func__); - return -ENOMEM; - } - - ftab_size = size; - - ret = cpu_cur.info->calc_freqtable(&cpu_cur, ftab, size); - s3c_cpufreq_addfreq(ftab, ret, size, CPUFREQ_TABLE_END); - - return 0; -} - -static int __init s3c_cpufreq_initcall(void) -{ - int ret = 0; - - if (cpu_cur.info && cpu_cur.board) { - ret = s3c_cpufreq_initclks(); - if (ret) - goto out; - - /* get current settings */ - s3c_cpufreq_getcur(&cpu_cur); - s3c_cpufreq_show("cur", &cpu_cur); - - if (cpu_cur.board->auto_io) { - ret = s3c_cpufreq_auto_io(); - if (ret) { - printk(KERN_ERR "%s: failed to get io timing\n", - __func__); - goto out; - } - } - - if (cpu_cur.board->need_io && !cpu_cur.info->set_iotiming) { - printk(KERN_ERR "%s: no IO support registered\n", - __func__); - ret = -EINVAL; - goto out; - } - - if (!cpu_cur.info->need_pll) - cpu_cur.lock_pll = 1; - - s3c_cpufreq_update_loctkime(); - - s3c_cpufreq_freq_min(&cpu_cur.max, &cpu_cur.board->max, - &cpu_cur.info->max); - - if (cpu_cur.info->calc_freqtable) - s3c_cpufreq_build_freq(); - - ret = cpufreq_register_driver(&s3c24xx_driver); - } - - out: - return ret; -} - -late_initcall(s3c_cpufreq_initcall); - -/** - * s3c_plltab_register - register CPU PLL table. - * @plls: The list of PLL entries. - * @plls_no: The size of the PLL entries @plls. - * - * Register the given set of PLLs with the system. - */ -int __init s3c_plltab_register(struct cpufreq_frequency_table *plls, - unsigned int plls_no) -{ - struct cpufreq_frequency_table *vals; - unsigned int size; - - size = sizeof(struct cpufreq_frequency_table) * (plls_no + 1); - - vals = kmalloc(size, GFP_KERNEL); - if (vals) { - memcpy(vals, plls, size); - pll_reg = vals; - - /* write a terminating entry, we don't store it in the - * table that is stored in the kernel */ - vals += plls_no; - vals->frequency = CPUFREQ_TABLE_END; - - printk(KERN_INFO "cpufreq: %d PLL entries\n", plls_no); - } else - printk(KERN_ERR "cpufreq: no memory for PLL tables\n"); - - return vals ? 0 : -ENOMEM; -} diff --git a/arch/arm/mach-s3c24xx/include/mach/s3c2412.h b/arch/arm/mach-s3c24xx/include/mach/s3c2412.h new file mode 100644 index 000000000000..548ced42cbb7 --- /dev/null +++ b/arch/arm/mach-s3c24xx/include/mach/s3c2412.h @@ -0,0 +1,26 @@ +/* + * Copyright (c) 2008 Simtec Electronics + * Ben Dooks + * http://armlinux.simtec.co.uk/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ARCH_ARM_MACH_S3C24XX_S3C2412_H +#define __ARCH_ARM_REGS_S3C24XX_S3C2412_H __FILE__ + +#define S3C2412_MEMREG(x) (S3C24XX_VA_MEMCTRL + (x)) +#define S3C2412_EBIREG(x) (S3C2412_VA_EBI + (x)) + +#define S3C2412_SSMCREG(x) (S3C2412_VA_SSMC + (x)) +#define S3C2412_SSMC(x, o) (S3C2412_SSMCREG((x * 0x20) + (o))) + +#define S3C2412_REFRESH S3C2412_MEMREG(0x10) + +#define S3C2412_EBI_BANKCFG S3C2412_EBIREG(0x4) + +#define S3C2412_SSMC_BANK(x) S3C2412_SSMC(x, 0x0) + +#endif /* __ARCH_ARM_MACH_S3C24XX_S3C2412_H */ diff --git a/arch/arm/mach-s3c24xx/iotiming-s3c2412.c b/arch/arm/mach-s3c24xx/iotiming-s3c2412.c index 663436d9db01..bd064c05c473 100644 --- a/arch/arm/mach-s3c24xx/iotiming-s3c2412.c +++ b/arch/arm/mach-s3c24xx/iotiming-s3c2412.c @@ -31,7 +31,7 @@ #include #include -#include "s3c2412.h" +#include #define print_ns(x) ((x) / 10), ((x) % 10) diff --git a/arch/arm/mach-s3c24xx/s3c2412.h b/arch/arm/mach-s3c24xx/s3c2412.h deleted file mode 100644 index 548ced42cbb7..000000000000 --- a/arch/arm/mach-s3c24xx/s3c2412.h +++ /dev/null @@ -1,26 +0,0 @@ -/* - * Copyright (c) 2008 Simtec Electronics - * Ben Dooks - * http://armlinux.simtec.co.uk/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ARCH_ARM_MACH_S3C24XX_S3C2412_H -#define __ARCH_ARM_REGS_S3C24XX_S3C2412_H __FILE__ - -#define S3C2412_MEMREG(x) (S3C24XX_VA_MEMCTRL + (x)) -#define S3C2412_EBIREG(x) (S3C2412_VA_EBI + (x)) - -#define S3C2412_SSMCREG(x) (S3C2412_VA_SSMC + (x)) -#define S3C2412_SSMC(x, o) (S3C2412_SSMCREG((x * 0x20) + (o))) - -#define S3C2412_REFRESH S3C2412_MEMREG(0x10) - -#define S3C2412_EBI_BANKCFG S3C2412_EBIREG(0x4) - -#define S3C2412_SSMC_BANK(x) S3C2412_SSMC(x, 0x0) - -#endif /* __ARCH_ARM_MACH_S3C24XX_S3C2412_H */ diff --git a/arch/arm/plat-samsung/include/plat/cpu-freq-core.h b/arch/arm/plat-samsung/include/plat/cpu-freq-core.h index 95509d8eb140..d7e17150028a 100644 --- a/arch/arm/plat-samsung/include/plat/cpu-freq-core.h +++ b/arch/arm/plat-samsung/include/plat/cpu-freq-core.h @@ -202,7 +202,7 @@ extern int s3c_plltab_register(struct cpufreq_frequency_table *plls, extern struct s3c_cpufreq_config *s3c_cpufreq_getconfig(void); extern struct s3c_iotimings *s3c_cpufreq_getiotimings(void); -#ifdef CONFIG_CPU_FREQ_S3C24XX_DEBUGFS +#ifdef CONFIG_ARM_S3C24XX_CPUFREQ_DEBUGFS #define s3c_cpufreq_debugfs_call(x) x #else #define s3c_cpufreq_debugfs_call(x) NULL @@ -259,17 +259,17 @@ extern void s3c2412_iotiming_set(struct s3c_cpufreq_config *cfg, #define s3c2412_iotiming_set NULL #endif /* CONFIG_S3C2412_IOTIMING */ -#ifdef CONFIG_CPU_FREQ_S3C24XX_DEBUG +#ifdef CONFIG_ARM_S3C24XX_CPUFREQ_DEBUG #define s3c_freq_dbg(x...) printk(KERN_INFO x) #else #define s3c_freq_dbg(x...) do { if (0) printk(x); } while (0) -#endif /* CONFIG_CPU_FREQ_S3C24XX_DEBUG */ +#endif /* CONFIG_ARM_S3C24XX_CPUFREQ_DEBUG */ -#ifdef CONFIG_CPU_FREQ_S3C24XX_IODEBUG +#ifdef CONFIG_ARM_S3C24XX_CPUFREQ_IODEBUG #define s3c_freq_iodbg(x...) printk(KERN_INFO x) #else #define s3c_freq_iodbg(x...) do { if (0) printk(x); } while (0) -#endif /* CONFIG_CPU_FREQ_S3C24XX_IODEBUG */ +#endif /* CONFIG_ARM_S3C24XX_CPUFREQ_IODEBUG */ static inline int s3c_cpufreq_addfreq(struct cpufreq_frequency_table *table, int index, size_t table_size, diff --git a/arch/arm/plat-samsung/include/plat/cpu-freq.h b/arch/arm/plat-samsung/include/plat/cpu-freq.h index 80c4a809c721..85517ab962ae 100644 --- a/arch/arm/plat-samsung/include/plat/cpu-freq.h +++ b/arch/arm/plat-samsung/include/plat/cpu-freq.h @@ -126,7 +126,7 @@ struct s3c_cpufreq_board { }; /* Things depending on frequency scaling. */ -#ifdef CONFIG_CPU_FREQ_S3C +#ifdef CONFIG_ARM_S3C_CPUFREQ #define __init_or_cpufreq #else #define __init_or_cpufreq __init @@ -134,7 +134,7 @@ struct s3c_cpufreq_board { /* Board functions */ -#ifdef CONFIG_CPU_FREQ_S3C +#ifdef CONFIG_ARM_S3C_CPUFREQ extern int s3c_cpufreq_setboard(struct s3c_cpufreq_board *board); #else @@ -142,4 +142,4 @@ static inline int s3c_cpufreq_setboard(struct s3c_cpufreq_board *board) { return 0; } -#endif /* CONFIG_CPU_FREQ_S3C */ +#endif /* CONFIG_ARM_S3C_CPUFREQ */ diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm index f3af18b9acc5..bbcd7199257b 100644 --- a/drivers/cpufreq/Kconfig.arm +++ b/drivers/cpufreq/Kconfig.arm @@ -95,6 +95,56 @@ config ARM_OMAP2PLUS_CPUFREQ default ARCH_OMAP2PLUS select CPU_FREQ_TABLE +config ARM_S3C_CPUFREQ + bool + help + Internal configuration node for common cpufreq on Samsung SoC + +config ARM_S3C24XX_CPUFREQ + bool "CPUfreq driver for Samsung S3C24XX series CPUs (EXPERIMENTAL)" + depends on ARCH_S3C24XX + select ARM_S3C_CPUFREQ + help + This enables the CPUfreq driver for the Samsung S3C24XX family + of CPUs. + + For details, take a look at . + + If in doubt, say N. + +config ARM_S3C24XX_CPUFREQ_DEBUG + bool "Debug CPUfreq Samsung driver core" + depends on ARM_S3C24XX_CPUFREQ + help + Enable s3c_freq_dbg for the Samsung S3C CPUfreq core + +config ARM_S3C24XX_CPUFREQ_IODEBUG + bool "Debug CPUfreq Samsung driver IO timing" + depends on ARM_S3C24XX_CPUFREQ + help + Enable s3c_freq_iodbg for the Samsung S3C CPUfreq core + +config ARM_S3C24XX_CPUFREQ_DEBUGFS + bool "Export debugfs for CPUFreq" + depends on ARM_S3C24XX_CPUFREQ && DEBUG_FS + help + Export status information via debugfs. + +config ARM_S3C2410_CPUFREQ + bool + depends on ARM_S3C24XX_CPUFREQ && CPU_S3C2410 + select S3C2410_CPUFREQ_UTILS + help + CPU Frequency scaling support for S3C2410 + +config ARM_S3C2412_CPUFREQ + bool + depends on ARM_S3C24XX_CPUFREQ && CPU_S3C2412 + default y + select S3C2412_IOTIMING + help + CPU Frequency scaling support for S3C2412 and S3C2413 SoC CPUs. + config ARM_S3C2416_CPUFREQ bool "S3C2416 CPU Frequency scaling support" depends on CPU_S3C2416 @@ -117,6 +167,14 @@ config ARM_S3C2416_CPUFREQ_VCORESCALE If in doubt, say N. +config ARM_S3C2440_CPUFREQ + bool "S3C2440/S3C2442 CPU Frequency scaling support" + depends on ARM_S3C24XX_CPUFREQ && (CPU_S3C2440 || CPU_S3C2442) + select S3C2410_CPUFREQ_UTILS + default y + help + CPU Frequency scaling support for S3C2440 and S3C2442 SoC CPUs. + config ARM_S3C64XX_CPUFREQ bool "Samsung S3C64XX" depends on CPU_S3C6410 diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile index 315b9231feb1..6ad0b913ca17 100644 --- a/drivers/cpufreq/Makefile +++ b/drivers/cpufreq/Makefile @@ -65,7 +65,12 @@ obj-$(CONFIG_ARM_OMAP2PLUS_CPUFREQ) += omap-cpufreq.o obj-$(CONFIG_PXA25x) += pxa2xx-cpufreq.o obj-$(CONFIG_PXA27x) += pxa2xx-cpufreq.o obj-$(CONFIG_PXA3xx) += pxa3xx-cpufreq.o +obj-$(CONFIG_ARM_S3C24XX_CPUFREQ) += s3c24xx-cpufreq.o +obj-$(CONFIG_ARM_S3C24XX_CPUFREQ_DEBUGFS) += s3c24xx-cpufreq-debugfs.o +obj-$(CONFIG_ARM_S3C2410_CPUFREQ) += s3c2410-cpufreq.o +obj-$(CONFIG_ARM_S3C2412_CPUFREQ) += s3c2412-cpufreq.o obj-$(CONFIG_ARM_S3C2416_CPUFREQ) += s3c2416-cpufreq.o +obj-$(CONFIG_ARM_S3C2440_CPUFREQ) += s3c2440-cpufreq.o obj-$(CONFIG_ARM_S3C64XX_CPUFREQ) += s3c64xx-cpufreq.o obj-$(CONFIG_ARM_S5PV210_CPUFREQ) += s5pv210-cpufreq.o obj-$(CONFIG_ARM_SA1100_CPUFREQ) += sa1100-cpufreq.o diff --git a/drivers/cpufreq/s3c2410-cpufreq.c b/drivers/cpufreq/s3c2410-cpufreq.c new file mode 100644 index 000000000000..cfa0dd8723ec --- /dev/null +++ b/drivers/cpufreq/s3c2410-cpufreq.c @@ -0,0 +1,160 @@ +/* + * Copyright (c) 2006-2008 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks + * + * S3C2410 CPU Frequency scaling + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include + +#include +#include +#include + +/* Note, 2410A has an extra mode for 1:4:4 ratio, bit 2 of CLKDIV */ + +static void s3c2410_cpufreq_setdivs(struct s3c_cpufreq_config *cfg) +{ + u32 clkdiv = 0; + + if (cfg->divs.h_divisor == 2) + clkdiv |= S3C2410_CLKDIVN_HDIVN; + + if (cfg->divs.p_divisor != cfg->divs.h_divisor) + clkdiv |= S3C2410_CLKDIVN_PDIVN; + + __raw_writel(clkdiv, S3C2410_CLKDIVN); +} + +static int s3c2410_cpufreq_calcdivs(struct s3c_cpufreq_config *cfg) +{ + unsigned long hclk, fclk, pclk; + unsigned int hdiv, pdiv; + unsigned long hclk_max; + + fclk = cfg->freq.fclk; + hclk_max = cfg->max.hclk; + + cfg->freq.armclk = fclk; + + s3c_freq_dbg("%s: fclk is %lu, max hclk %lu\n", + __func__, fclk, hclk_max); + + hdiv = (fclk > cfg->max.hclk) ? 2 : 1; + hclk = fclk / hdiv; + + if (hclk > cfg->max.hclk) { + s3c_freq_dbg("%s: hclk too big\n", __func__); + return -EINVAL; + } + + pdiv = (hclk > cfg->max.pclk) ? 2 : 1; + pclk = hclk / pdiv; + + if (pclk > cfg->max.pclk) { + s3c_freq_dbg("%s: pclk too big\n", __func__); + return -EINVAL; + } + + pdiv *= hdiv; + + /* record the result */ + cfg->divs.p_divisor = pdiv; + cfg->divs.h_divisor = hdiv; + + return 0; +} + +static struct s3c_cpufreq_info s3c2410_cpufreq_info = { + .max = { + .fclk = 200000000, + .hclk = 100000000, + .pclk = 50000000, + }, + + /* transition latency is about 5ms worst-case, so + * set 10ms to be sure */ + .latency = 10000000, + + .locktime_m = 150, + .locktime_u = 150, + .locktime_bits = 12, + + .need_pll = 1, + + .name = "s3c2410", + .calc_iotiming = s3c2410_iotiming_calc, + .set_iotiming = s3c2410_iotiming_set, + .get_iotiming = s3c2410_iotiming_get, + .resume_clocks = s3c2410_setup_clocks, + + .set_fvco = s3c2410_set_fvco, + .set_refresh = s3c2410_cpufreq_setrefresh, + .set_divs = s3c2410_cpufreq_setdivs, + .calc_divs = s3c2410_cpufreq_calcdivs, + + .debug_io_show = s3c_cpufreq_debugfs_call(s3c2410_iotiming_debugfs), +}; + +static int s3c2410_cpufreq_add(struct device *dev, + struct subsys_interface *sif) +{ + return s3c_cpufreq_register(&s3c2410_cpufreq_info); +} + +static struct subsys_interface s3c2410_cpufreq_interface = { + .name = "s3c2410_cpufreq", + .subsys = &s3c2410_subsys, + .add_dev = s3c2410_cpufreq_add, +}; + +static int __init s3c2410_cpufreq_init(void) +{ + return subsys_interface_register(&s3c2410_cpufreq_interface); +} +arch_initcall(s3c2410_cpufreq_init); + +static int s3c2410a_cpufreq_add(struct device *dev, + struct subsys_interface *sif) +{ + /* alter the maximum freq settings for S3C2410A. If a board knows + * it only has a maximum of 200, then it should register its own + * limits. */ + + s3c2410_cpufreq_info.max.fclk = 266000000; + s3c2410_cpufreq_info.max.hclk = 133000000; + s3c2410_cpufreq_info.max.pclk = 66500000; + s3c2410_cpufreq_info.name = "s3c2410a"; + + return s3c2410_cpufreq_add(dev, sif); +} + +static struct subsys_interface s3c2410a_cpufreq_interface = { + .name = "s3c2410a_cpufreq", + .subsys = &s3c2410a_subsys, + .add_dev = s3c2410a_cpufreq_add, +}; + +static int __init s3c2410a_cpufreq_init(void) +{ + return subsys_interface_register(&s3c2410a_cpufreq_interface); +} +arch_initcall(s3c2410a_cpufreq_init); diff --git a/drivers/cpufreq/s3c2412-cpufreq.c b/drivers/cpufreq/s3c2412-cpufreq.c new file mode 100644 index 000000000000..4645b4898996 --- /dev/null +++ b/drivers/cpufreq/s3c2412-cpufreq.c @@ -0,0 +1,257 @@ +/* + * Copyright 2008 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks + * + * S3C2412 CPU Frequency scalling + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include +#include + +#include +#include +#include + +/* our clock resources. */ +static struct clk *xtal; +static struct clk *fclk; +static struct clk *hclk; +static struct clk *armclk; + +/* HDIV: 1, 2, 3, 4, 6, 8 */ + +static int s3c2412_cpufreq_calcdivs(struct s3c_cpufreq_config *cfg) +{ + unsigned int hdiv, pdiv, armdiv, dvs; + unsigned long hclk, fclk, armclk, armdiv_clk; + unsigned long hclk_max; + + fclk = cfg->freq.fclk; + armclk = cfg->freq.armclk; + hclk_max = cfg->max.hclk; + + /* We can't run hclk above armclk as at the best we have to + * have armclk and hclk in dvs mode. */ + + if (hclk_max > armclk) + hclk_max = armclk; + + s3c_freq_dbg("%s: fclk=%lu, armclk=%lu, hclk_max=%lu\n", + __func__, fclk, armclk, hclk_max); + s3c_freq_dbg("%s: want f=%lu, arm=%lu, h=%lu, p=%lu\n", + __func__, cfg->freq.fclk, cfg->freq.armclk, + cfg->freq.hclk, cfg->freq.pclk); + + armdiv = fclk / armclk; + + if (armdiv < 1) + armdiv = 1; + if (armdiv > 2) + armdiv = 2; + + cfg->divs.arm_divisor = armdiv; + armdiv_clk = fclk / armdiv; + + hdiv = armdiv_clk / hclk_max; + if (hdiv < 1) + hdiv = 1; + + cfg->freq.hclk = hclk = armdiv_clk / hdiv; + + /* set dvs depending on whether we reached armclk or not. */ + cfg->divs.dvs = dvs = armclk < armdiv_clk; + + /* update the actual armclk we achieved. */ + cfg->freq.armclk = dvs ? hclk : armdiv_clk; + + s3c_freq_dbg("%s: armclk %lu, hclk %lu, armdiv %d, hdiv %d, dvs %d\n", + __func__, armclk, hclk, armdiv, hdiv, cfg->divs.dvs); + + if (hdiv > 4) + goto invalid; + + pdiv = (hclk > cfg->max.pclk) ? 2 : 1; + + if ((hclk / pdiv) > cfg->max.pclk) + pdiv++; + + cfg->freq.pclk = hclk / pdiv; + + s3c_freq_dbg("%s: pdiv %d\n", __func__, pdiv); + + if (pdiv > 2) + goto invalid; + + pdiv *= hdiv; + + /* store the result, and then return */ + + cfg->divs.h_divisor = hdiv * armdiv; + cfg->divs.p_divisor = pdiv * armdiv; + + return 0; + +invalid: + return -EINVAL; +} + +static void s3c2412_cpufreq_setdivs(struct s3c_cpufreq_config *cfg) +{ + unsigned long clkdiv; + unsigned long olddiv; + + olddiv = clkdiv = __raw_readl(S3C2410_CLKDIVN); + + /* clear off current clock info */ + + clkdiv &= ~S3C2412_CLKDIVN_ARMDIVN; + clkdiv &= ~S3C2412_CLKDIVN_HDIVN_MASK; + clkdiv &= ~S3C2412_CLKDIVN_PDIVN; + + if (cfg->divs.arm_divisor == 2) + clkdiv |= S3C2412_CLKDIVN_ARMDIVN; + + clkdiv |= ((cfg->divs.h_divisor / cfg->divs.arm_divisor) - 1); + + if (cfg->divs.p_divisor != cfg->divs.h_divisor) + clkdiv |= S3C2412_CLKDIVN_PDIVN; + + s3c_freq_dbg("%s: div %08lx => %08lx\n", __func__, olddiv, clkdiv); + __raw_writel(clkdiv, S3C2410_CLKDIVN); + + clk_set_parent(armclk, cfg->divs.dvs ? hclk : fclk); +} + +static void s3c2412_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg) +{ + struct s3c_cpufreq_board *board = cfg->board; + unsigned long refresh; + + s3c_freq_dbg("%s: refresh %u ns, hclk %lu\n", __func__, + board->refresh, cfg->freq.hclk); + + /* Reduce both the refresh time (in ns) and the frequency (in MHz) + * by 10 each to ensure that we do not overflow 32 bit numbers. This + * should work for HCLK up to 133MHz and refresh period up to 30usec. + */ + + refresh = (board->refresh / 10); + refresh *= (cfg->freq.hclk / 100); + refresh /= (1 * 1000 * 1000); /* 10^6 */ + + s3c_freq_dbg("%s: setting refresh 0x%08lx\n", __func__, refresh); + __raw_writel(refresh, S3C2412_REFRESH); +} + +/* set the default cpu frequency information, based on an 200MHz part + * as we have no other way of detecting the speed rating in software. + */ + +static struct s3c_cpufreq_info s3c2412_cpufreq_info = { + .max = { + .fclk = 200000000, + .hclk = 100000000, + .pclk = 50000000, + }, + + .latency = 5000000, /* 5ms */ + + .locktime_m = 150, + .locktime_u = 150, + .locktime_bits = 16, + + .name = "s3c2412", + .set_refresh = s3c2412_cpufreq_setrefresh, + .set_divs = s3c2412_cpufreq_setdivs, + .calc_divs = s3c2412_cpufreq_calcdivs, + + .calc_iotiming = s3c2412_iotiming_calc, + .set_iotiming = s3c2412_iotiming_set, + .get_iotiming = s3c2412_iotiming_get, + + .resume_clocks = s3c2412_setup_clocks, + + .debug_io_show = s3c_cpufreq_debugfs_call(s3c2412_iotiming_debugfs), +}; + +static int s3c2412_cpufreq_add(struct device *dev, + struct subsys_interface *sif) +{ + unsigned long fclk_rate; + + hclk = clk_get(NULL, "hclk"); + if (IS_ERR(hclk)) { + printk(KERN_ERR "%s: cannot find hclk clock\n", __func__); + return -ENOENT; + } + + fclk = clk_get(NULL, "fclk"); + if (IS_ERR(fclk)) { + printk(KERN_ERR "%s: cannot find fclk clock\n", __func__); + goto err_fclk; + } + + fclk_rate = clk_get_rate(fclk); + if (fclk_rate > 200000000) { + printk(KERN_INFO + "%s: fclk %ld MHz, assuming 266MHz capable part\n", + __func__, fclk_rate / 1000000); + s3c2412_cpufreq_info.max.fclk = 266000000; + s3c2412_cpufreq_info.max.hclk = 133000000; + s3c2412_cpufreq_info.max.pclk = 66000000; + } + + armclk = clk_get(NULL, "armclk"); + if (IS_ERR(armclk)) { + printk(KERN_ERR "%s: cannot find arm clock\n", __func__); + goto err_armclk; + } + + xtal = clk_get(NULL, "xtal"); + if (IS_ERR(xtal)) { + printk(KERN_ERR "%s: cannot find xtal clock\n", __func__); + goto err_xtal; + } + + return s3c_cpufreq_register(&s3c2412_cpufreq_info); + +err_xtal: + clk_put(armclk); +err_armclk: + clk_put(fclk); +err_fclk: + clk_put(hclk); + + return -ENOENT; +} + +static struct subsys_interface s3c2412_cpufreq_interface = { + .name = "s3c2412_cpufreq", + .subsys = &s3c2412_subsys, + .add_dev = s3c2412_cpufreq_add, +}; + +static int s3c2412_cpufreq_init(void) +{ + return subsys_interface_register(&s3c2412_cpufreq_interface); +} +arch_initcall(s3c2412_cpufreq_init); diff --git a/drivers/cpufreq/s3c2440-cpufreq.c b/drivers/cpufreq/s3c2440-cpufreq.c new file mode 100644 index 000000000000..72b2cc8a5a85 --- /dev/null +++ b/drivers/cpufreq/s3c2440-cpufreq.c @@ -0,0 +1,312 @@ +/* + * Copyright (c) 2006-2009 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks + * Vincent Sanders + * + * S3C2440/S3C2442 CPU Frequency scaling + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#include +#include + +#include + +#include +#include +#include + +static struct clk *xtal; +static struct clk *fclk; +static struct clk *hclk; +static struct clk *armclk; + +/* HDIV: 1, 2, 3, 4, 6, 8 */ + +static inline int within_khz(unsigned long a, unsigned long b) +{ + long diff = a - b; + + return (diff >= -1000 && diff <= 1000); +} + +/** + * s3c2440_cpufreq_calcdivs - calculate divider settings + * @cfg: The cpu frequency settings. + * + * Calcualte the divider values for the given frequency settings + * specified in @cfg. The values are stored in @cfg for later use + * by the relevant set routine if the request settings can be reached. + */ +int s3c2440_cpufreq_calcdivs(struct s3c_cpufreq_config *cfg) +{ + unsigned int hdiv, pdiv; + unsigned long hclk, fclk, armclk; + unsigned long hclk_max; + + fclk = cfg->freq.fclk; + armclk = cfg->freq.armclk; + hclk_max = cfg->max.hclk; + + s3c_freq_dbg("%s: fclk is %lu, armclk %lu, max hclk %lu\n", + __func__, fclk, armclk, hclk_max); + + if (armclk > fclk) { + printk(KERN_WARNING "%s: armclk > fclk\n", __func__); + armclk = fclk; + } + + /* if we are in DVS, we need HCLK to be <= ARMCLK */ + if (armclk < fclk && armclk < hclk_max) + hclk_max = armclk; + + for (hdiv = 1; hdiv < 9; hdiv++) { + if (hdiv == 5 || hdiv == 7) + hdiv++; + + hclk = (fclk / hdiv); + if (hclk <= hclk_max || within_khz(hclk, hclk_max)) + break; + } + + s3c_freq_dbg("%s: hclk %lu, div %d\n", __func__, hclk, hdiv); + + if (hdiv > 8) + goto invalid; + + pdiv = (hclk > cfg->max.pclk) ? 2 : 1; + + if ((hclk / pdiv) > cfg->max.pclk) + pdiv++; + + s3c_freq_dbg("%s: pdiv %d\n", __func__, pdiv); + + if (pdiv > 2) + goto invalid; + + pdiv *= hdiv; + + /* calculate a valid armclk */ + + if (armclk < hclk) + armclk = hclk; + + /* if we're running armclk lower than fclk, this really means + * that the system should go into dvs mode, which means that + * armclk is connected to hclk. */ + if (armclk < fclk) { + cfg->divs.dvs = 1; + armclk = hclk; + } else + cfg->divs.dvs = 0; + + cfg->freq.armclk = armclk; + + /* store the result, and then return */ + + cfg->divs.h_divisor = hdiv; + cfg->divs.p_divisor = pdiv; + + return 0; + + invalid: + return -EINVAL; +} + +#define CAMDIVN_HCLK_HALF (S3C2440_CAMDIVN_HCLK3_HALF | \ + S3C2440_CAMDIVN_HCLK4_HALF) + +/** + * s3c2440_cpufreq_setdivs - set the cpu frequency divider settings + * @cfg: The cpu frequency settings. + * + * Set the divisors from the settings in @cfg, which where generated + * during the calculation phase by s3c2440_cpufreq_calcdivs(). + */ +static void s3c2440_cpufreq_setdivs(struct s3c_cpufreq_config *cfg) +{ + unsigned long clkdiv, camdiv; + + s3c_freq_dbg("%s: divsiors: h=%d, p=%d\n", __func__, + cfg->divs.h_divisor, cfg->divs.p_divisor); + + clkdiv = __raw_readl(S3C2410_CLKDIVN); + camdiv = __raw_readl(S3C2440_CAMDIVN); + + clkdiv &= ~(S3C2440_CLKDIVN_HDIVN_MASK | S3C2440_CLKDIVN_PDIVN); + camdiv &= ~CAMDIVN_HCLK_HALF; + + switch (cfg->divs.h_divisor) { + case 1: + clkdiv |= S3C2440_CLKDIVN_HDIVN_1; + break; + + case 2: + clkdiv |= S3C2440_CLKDIVN_HDIVN_2; + break; + + case 6: + camdiv |= S3C2440_CAMDIVN_HCLK3_HALF; + case 3: + clkdiv |= S3C2440_CLKDIVN_HDIVN_3_6; + break; + + case 8: + camdiv |= S3C2440_CAMDIVN_HCLK4_HALF; + case 4: + clkdiv |= S3C2440_CLKDIVN_HDIVN_4_8; + break; + + default: + BUG(); /* we don't expect to get here. */ + } + + if (cfg->divs.p_divisor != cfg->divs.h_divisor) + clkdiv |= S3C2440_CLKDIVN_PDIVN; + + /* todo - set pclk. */ + + /* Write the divisors first with hclk intentionally halved so that + * when we write clkdiv we will under-frequency instead of over. We + * then make a short delay and remove the hclk halving if necessary. + */ + + __raw_writel(camdiv | CAMDIVN_HCLK_HALF, S3C2440_CAMDIVN); + __raw_writel(clkdiv, S3C2410_CLKDIVN); + + ndelay(20); + __raw_writel(camdiv, S3C2440_CAMDIVN); + + clk_set_parent(armclk, cfg->divs.dvs ? hclk : fclk); +} + +static int run_freq_for(unsigned long max_hclk, unsigned long fclk, + int *divs, + struct cpufreq_frequency_table *table, + size_t table_size) +{ + unsigned long freq; + int index = 0; + int div; + + for (div = *divs; div > 0; div = *divs++) { + freq = fclk / div; + + if (freq > max_hclk && div != 1) + continue; + + freq /= 1000; /* table is in kHz */ + index = s3c_cpufreq_addfreq(table, index, table_size, freq); + if (index < 0) + break; + } + + return index; +} + +static int hclk_divs[] = { 1, 2, 3, 4, 6, 8, -1 }; + +static int s3c2440_cpufreq_calctable(struct s3c_cpufreq_config *cfg, + struct cpufreq_frequency_table *table, + size_t table_size) +{ + int ret; + + WARN_ON(cfg->info == NULL); + WARN_ON(cfg->board == NULL); + + ret = run_freq_for(cfg->info->max.hclk, + cfg->info->max.fclk, + hclk_divs, + table, table_size); + + s3c_freq_dbg("%s: returning %d\n", __func__, ret); + + return ret; +} + +struct s3c_cpufreq_info s3c2440_cpufreq_info = { + .max = { + .fclk = 400000000, + .hclk = 133333333, + .pclk = 66666666, + }, + + .locktime_m = 300, + .locktime_u = 300, + .locktime_bits = 16, + + .name = "s3c244x", + .calc_iotiming = s3c2410_iotiming_calc, + .set_iotiming = s3c2410_iotiming_set, + .get_iotiming = s3c2410_iotiming_get, + .set_fvco = s3c2410_set_fvco, + + .set_refresh = s3c2410_cpufreq_setrefresh, + .set_divs = s3c2440_cpufreq_setdivs, + .calc_divs = s3c2440_cpufreq_calcdivs, + .calc_freqtable = s3c2440_cpufreq_calctable, + + .resume_clocks = s3c244x_setup_clocks, + + .debug_io_show = s3c_cpufreq_debugfs_call(s3c2410_iotiming_debugfs), +}; + +static int s3c2440_cpufreq_add(struct device *dev, + struct subsys_interface *sif) +{ + xtal = s3c_cpufreq_clk_get(NULL, "xtal"); + hclk = s3c_cpufreq_clk_get(NULL, "hclk"); + fclk = s3c_cpufreq_clk_get(NULL, "fclk"); + armclk = s3c_cpufreq_clk_get(NULL, "armclk"); + + if (IS_ERR(xtal) || IS_ERR(hclk) || IS_ERR(fclk) || IS_ERR(armclk)) { + printk(KERN_ERR "%s: failed to get clocks\n", __func__); + return -ENOENT; + } + + return s3c_cpufreq_register(&s3c2440_cpufreq_info); +} + +static struct subsys_interface s3c2440_cpufreq_interface = { + .name = "s3c2440_cpufreq", + .subsys = &s3c2440_subsys, + .add_dev = s3c2440_cpufreq_add, +}; + +static int s3c2440_cpufreq_init(void) +{ + return subsys_interface_register(&s3c2440_cpufreq_interface); +} + +/* arch_initcall adds the clocks we need, so use subsys_initcall. */ +subsys_initcall(s3c2440_cpufreq_init); + +static struct subsys_interface s3c2442_cpufreq_interface = { + .name = "s3c2442_cpufreq", + .subsys = &s3c2442_subsys, + .add_dev = s3c2440_cpufreq_add, +}; + +static int s3c2442_cpufreq_init(void) +{ + return subsys_interface_register(&s3c2442_cpufreq_interface); +} +subsys_initcall(s3c2442_cpufreq_init); diff --git a/drivers/cpufreq/s3c24xx-cpufreq-debugfs.c b/drivers/cpufreq/s3c24xx-cpufreq-debugfs.c new file mode 100644 index 000000000000..9b7b4289d66c --- /dev/null +++ b/drivers/cpufreq/s3c24xx-cpufreq-debugfs.c @@ -0,0 +1,198 @@ +/* + * Copyright (c) 2009 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks + * + * S3C24XX CPU Frequency scaling - debugfs status support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +static struct dentry *dbgfs_root; +static struct dentry *dbgfs_file_io; +static struct dentry *dbgfs_file_info; +static struct dentry *dbgfs_file_board; + +#define print_ns(x) ((x) / 10), ((x) % 10) + +static void show_max(struct seq_file *seq, struct s3c_freq *f) +{ + seq_printf(seq, "MAX: F=%lu, H=%lu, P=%lu, A=%lu\n", + f->fclk, f->hclk, f->pclk, f->armclk); +} + +static int board_show(struct seq_file *seq, void *p) +{ + struct s3c_cpufreq_config *cfg; + struct s3c_cpufreq_board *brd; + + cfg = s3c_cpufreq_getconfig(); + if (!cfg) { + seq_printf(seq, "no configuration registered\n"); + return 0; + } + + brd = cfg->board; + if (!brd) { + seq_printf(seq, "no board definition set?\n"); + return 0; + } + + seq_printf(seq, "SDRAM refresh %u ns\n", brd->refresh); + seq_printf(seq, "auto_io=%u\n", brd->auto_io); + seq_printf(seq, "need_io=%u\n", brd->need_io); + + show_max(seq, &brd->max); + + + return 0; +} + +static int fops_board_open(struct inode *inode, struct file *file) +{ + return single_open(file, board_show, NULL); +} + +static const struct file_operations fops_board = { + .open = fops_board_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, + .owner = THIS_MODULE, +}; + +static int info_show(struct seq_file *seq, void *p) +{ + struct s3c_cpufreq_config *cfg; + + cfg = s3c_cpufreq_getconfig(); + if (!cfg) { + seq_printf(seq, "no configuration registered\n"); + return 0; + } + + seq_printf(seq, " FCLK %ld Hz\n", cfg->freq.fclk); + seq_printf(seq, " HCLK %ld Hz (%lu.%lu ns)\n", + cfg->freq.hclk, print_ns(cfg->freq.hclk_tns)); + seq_printf(seq, " PCLK %ld Hz\n", cfg->freq.hclk); + seq_printf(seq, "ARMCLK %ld Hz\n", cfg->freq.armclk); + seq_printf(seq, "\n"); + + show_max(seq, &cfg->max); + + seq_printf(seq, "Divisors: P=%d, H=%d, A=%d, dvs=%s\n", + cfg->divs.h_divisor, cfg->divs.p_divisor, + cfg->divs.arm_divisor, cfg->divs.dvs ? "on" : "off"); + seq_printf(seq, "\n"); + + seq_printf(seq, "lock_pll=%u\n", cfg->lock_pll); + + return 0; +} + +static int fops_info_open(struct inode *inode, struct file *file) +{ + return single_open(file, info_show, NULL); +} + +static const struct file_operations fops_info = { + .open = fops_info_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, + .owner = THIS_MODULE, +}; + +static int io_show(struct seq_file *seq, void *p) +{ + void (*show_bank)(struct seq_file *, struct s3c_cpufreq_config *, union s3c_iobank *); + struct s3c_cpufreq_config *cfg; + struct s3c_iotimings *iot; + union s3c_iobank *iob; + int bank; + + cfg = s3c_cpufreq_getconfig(); + if (!cfg) { + seq_printf(seq, "no configuration registered\n"); + return 0; + } + + show_bank = cfg->info->debug_io_show; + if (!show_bank) { + seq_printf(seq, "no code to show bank timing\n"); + return 0; + } + + iot = s3c_cpufreq_getiotimings(); + if (!iot) { + seq_printf(seq, "no io timings registered\n"); + return 0; + } + + seq_printf(seq, "hclk period is %lu.%lu ns\n", print_ns(cfg->freq.hclk_tns)); + + for (bank = 0; bank < MAX_BANKS; bank++) { + iob = &iot->bank[bank]; + + seq_printf(seq, "bank %d: ", bank); + + if (!iob->io_2410) { + seq_printf(seq, "nothing set\n"); + continue; + } + + show_bank(seq, cfg, iob); + } + + return 0; +} + +static int fops_io_open(struct inode *inode, struct file *file) +{ + return single_open(file, io_show, NULL); +} + +static const struct file_operations fops_io = { + .open = fops_io_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, + .owner = THIS_MODULE, +}; + + +static int __init s3c_freq_debugfs_init(void) +{ + dbgfs_root = debugfs_create_dir("s3c-cpufreq", NULL); + if (IS_ERR(dbgfs_root)) { + printk(KERN_ERR "%s: error creating debugfs root\n", __func__); + return PTR_ERR(dbgfs_root); + } + + dbgfs_file_io = debugfs_create_file("io-timing", S_IRUGO, dbgfs_root, + NULL, &fops_io); + + dbgfs_file_info = debugfs_create_file("info", S_IRUGO, dbgfs_root, + NULL, &fops_info); + + dbgfs_file_board = debugfs_create_file("board", S_IRUGO, dbgfs_root, + NULL, &fops_board); + + return 0; +} + +late_initcall(s3c_freq_debugfs_init); + diff --git a/drivers/cpufreq/s3c24xx-cpufreq.c b/drivers/cpufreq/s3c24xx-cpufreq.c new file mode 100644 index 000000000000..3c0e78ede0da --- /dev/null +++ b/drivers/cpufreq/s3c24xx-cpufreq.c @@ -0,0 +1,711 @@ +/* + * Copyright (c) 2006-2008 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks + * + * S3C24XX CPU Frequency scaling + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include +#include +#include + +#include + +/* note, cpufreq support deals in kHz, no Hz */ + +static struct cpufreq_driver s3c24xx_driver; +static struct s3c_cpufreq_config cpu_cur; +static struct s3c_iotimings s3c24xx_iotiming; +static struct cpufreq_frequency_table *pll_reg; +static unsigned int last_target = ~0; +static unsigned int ftab_size; +static struct cpufreq_frequency_table *ftab; + +static struct clk *_clk_mpll; +static struct clk *_clk_xtal; +static struct clk *clk_fclk; +static struct clk *clk_hclk; +static struct clk *clk_pclk; +static struct clk *clk_arm; + +#ifdef CONFIG_CPU_FREQ_S3C24XX_DEBUGFS +struct s3c_cpufreq_config *s3c_cpufreq_getconfig(void) +{ + return &cpu_cur; +} + +struct s3c_iotimings *s3c_cpufreq_getiotimings(void) +{ + return &s3c24xx_iotiming; +} +#endif /* CONFIG_CPU_FREQ_S3C24XX_DEBUGFS */ + +static void s3c_cpufreq_getcur(struct s3c_cpufreq_config *cfg) +{ + unsigned long fclk, pclk, hclk, armclk; + + cfg->freq.fclk = fclk = clk_get_rate(clk_fclk); + cfg->freq.hclk = hclk = clk_get_rate(clk_hclk); + cfg->freq.pclk = pclk = clk_get_rate(clk_pclk); + cfg->freq.armclk = armclk = clk_get_rate(clk_arm); + + cfg->pll.index = __raw_readl(S3C2410_MPLLCON); + cfg->pll.frequency = fclk; + + cfg->freq.hclk_tns = 1000000000 / (cfg->freq.hclk / 10); + + cfg->divs.h_divisor = fclk / hclk; + cfg->divs.p_divisor = fclk / pclk; +} + +static inline void s3c_cpufreq_calc(struct s3c_cpufreq_config *cfg) +{ + unsigned long pll = cfg->pll.frequency; + + cfg->freq.fclk = pll; + cfg->freq.hclk = pll / cfg->divs.h_divisor; + cfg->freq.pclk = pll / cfg->divs.p_divisor; + + /* convert hclk into 10ths of nanoseconds for io calcs */ + cfg->freq.hclk_tns = 1000000000 / (cfg->freq.hclk / 10); +} + +static inline int closer(unsigned int target, unsigned int n, unsigned int c) +{ + int diff_cur = abs(target - c); + int diff_new = abs(target - n); + + return (diff_new < diff_cur); +} + +static void s3c_cpufreq_show(const char *pfx, + struct s3c_cpufreq_config *cfg) +{ + s3c_freq_dbg("%s: Fvco=%u, F=%lu, A=%lu, H=%lu (%u), P=%lu (%u)\n", + pfx, cfg->pll.frequency, cfg->freq.fclk, cfg->freq.armclk, + cfg->freq.hclk, cfg->divs.h_divisor, + cfg->freq.pclk, cfg->divs.p_divisor); +} + +/* functions to wrapper the driver info calls to do the cpu specific work */ + +static void s3c_cpufreq_setio(struct s3c_cpufreq_config *cfg) +{ + if (cfg->info->set_iotiming) + (cfg->info->set_iotiming)(cfg, &s3c24xx_iotiming); +} + +static int s3c_cpufreq_calcio(struct s3c_cpufreq_config *cfg) +{ + if (cfg->info->calc_iotiming) + return (cfg->info->calc_iotiming)(cfg, &s3c24xx_iotiming); + + return 0; +} + +static void s3c_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg) +{ + (cfg->info->set_refresh)(cfg); +} + +static void s3c_cpufreq_setdivs(struct s3c_cpufreq_config *cfg) +{ + (cfg->info->set_divs)(cfg); +} + +static int s3c_cpufreq_calcdivs(struct s3c_cpufreq_config *cfg) +{ + return (cfg->info->calc_divs)(cfg); +} + +static void s3c_cpufreq_setfvco(struct s3c_cpufreq_config *cfg) +{ + (cfg->info->set_fvco)(cfg); +} + +static inline void s3c_cpufreq_resume_clocks(void) +{ + cpu_cur.info->resume_clocks(); +} + +static inline void s3c_cpufreq_updateclk(struct clk *clk, + unsigned int freq) +{ + clk_set_rate(clk, freq); +} + +static int s3c_cpufreq_settarget(struct cpufreq_policy *policy, + unsigned int target_freq, + struct cpufreq_frequency_table *pll) +{ + struct s3c_cpufreq_freqs freqs; + struct s3c_cpufreq_config cpu_new; + unsigned long flags; + + cpu_new = cpu_cur; /* copy new from current */ + + s3c_cpufreq_show("cur", &cpu_cur); + + /* TODO - check for DMA currently outstanding */ + + cpu_new.pll = pll ? *pll : cpu_cur.pll; + + if (pll) + freqs.pll_changing = 1; + + /* update our frequencies */ + + cpu_new.freq.armclk = target_freq; + cpu_new.freq.fclk = cpu_new.pll.frequency; + + if (s3c_cpufreq_calcdivs(&cpu_new) < 0) { + printk(KERN_ERR "no divisors for %d\n", target_freq); + goto err_notpossible; + } + + s3c_freq_dbg("%s: got divs\n", __func__); + + s3c_cpufreq_calc(&cpu_new); + + s3c_freq_dbg("%s: calculated frequencies for new\n", __func__); + + if (cpu_new.freq.hclk != cpu_cur.freq.hclk) { + if (s3c_cpufreq_calcio(&cpu_new) < 0) { + printk(KERN_ERR "%s: no IO timings\n", __func__); + goto err_notpossible; + } + } + + s3c_cpufreq_show("new", &cpu_new); + + /* setup our cpufreq parameters */ + + freqs.old = cpu_cur.freq; + freqs.new = cpu_new.freq; + + freqs.freqs.old = cpu_cur.freq.armclk / 1000; + freqs.freqs.new = cpu_new.freq.armclk / 1000; + + /* update f/h/p clock settings before we issue the change + * notification, so that drivers do not need to do anything + * special if they want to recalculate on CPUFREQ_PRECHANGE. */ + + s3c_cpufreq_updateclk(_clk_mpll, cpu_new.pll.frequency); + s3c_cpufreq_updateclk(clk_fclk, cpu_new.freq.fclk); + s3c_cpufreq_updateclk(clk_hclk, cpu_new.freq.hclk); + s3c_cpufreq_updateclk(clk_pclk, cpu_new.freq.pclk); + + /* start the frequency change */ + cpufreq_notify_transition(policy, &freqs.freqs, CPUFREQ_PRECHANGE); + + /* If hclk is staying the same, then we do not need to + * re-write the IO or the refresh timings whilst we are changing + * speed. */ + + local_irq_save(flags); + + /* is our memory clock slowing down? */ + if (cpu_new.freq.hclk < cpu_cur.freq.hclk) { + s3c_cpufreq_setrefresh(&cpu_new); + s3c_cpufreq_setio(&cpu_new); + } + + if (cpu_new.freq.fclk == cpu_cur.freq.fclk) { + /* not changing PLL, just set the divisors */ + + s3c_cpufreq_setdivs(&cpu_new); + } else { + if (cpu_new.freq.fclk < cpu_cur.freq.fclk) { + /* slow the cpu down, then set divisors */ + + s3c_cpufreq_setfvco(&cpu_new); + s3c_cpufreq_setdivs(&cpu_new); + } else { + /* set the divisors, then speed up */ + + s3c_cpufreq_setdivs(&cpu_new); + s3c_cpufreq_setfvco(&cpu_new); + } + } + + /* did our memory clock speed up */ + if (cpu_new.freq.hclk > cpu_cur.freq.hclk) { + s3c_cpufreq_setrefresh(&cpu_new); + s3c_cpufreq_setio(&cpu_new); + } + + /* update our current settings */ + cpu_cur = cpu_new; + + local_irq_restore(flags); + + /* notify everyone we've done this */ + cpufreq_notify_transition(policy, &freqs.freqs, CPUFREQ_POSTCHANGE); + + s3c_freq_dbg("%s: finished\n", __func__); + return 0; + + err_notpossible: + printk(KERN_ERR "no compatible settings for %d\n", target_freq); + return -EINVAL; +} + +/* s3c_cpufreq_target + * + * called by the cpufreq core to adjust the frequency that the CPU + * is currently running at. + */ + +static int s3c_cpufreq_target(struct cpufreq_policy *policy, + unsigned int target_freq, + unsigned int relation) +{ + struct cpufreq_frequency_table *pll; + unsigned int index; + + /* avoid repeated calls which cause a needless amout of duplicated + * logging output (and CPU time as the calculation process is + * done) */ + if (target_freq == last_target) + return 0; + + last_target = target_freq; + + s3c_freq_dbg("%s: policy %p, target %u, relation %u\n", + __func__, policy, target_freq, relation); + + if (ftab) { + if (cpufreq_frequency_table_target(policy, ftab, + target_freq, relation, + &index)) { + s3c_freq_dbg("%s: table failed\n", __func__); + return -EINVAL; + } + + s3c_freq_dbg("%s: adjust %d to entry %d (%u)\n", __func__, + target_freq, index, ftab[index].frequency); + target_freq = ftab[index].frequency; + } + + target_freq *= 1000; /* convert target to Hz */ + + /* find the settings for our new frequency */ + + if (!pll_reg || cpu_cur.lock_pll) { + /* either we've not got any PLL values, or we've locked + * to the current one. */ + pll = NULL; + } else { + struct cpufreq_policy tmp_policy; + int ret; + + /* we keep the cpu pll table in Hz, to ensure we get an + * accurate value for the PLL output. */ + + tmp_policy.min = policy->min * 1000; + tmp_policy.max = policy->max * 1000; + tmp_policy.cpu = policy->cpu; + + /* cpufreq_frequency_table_target uses a pointer to 'index' + * which is the number of the table entry, not the value of + * the table entry's index field. */ + + ret = cpufreq_frequency_table_target(&tmp_policy, pll_reg, + target_freq, relation, + &index); + + if (ret < 0) { + printk(KERN_ERR "%s: no PLL available\n", __func__); + goto err_notpossible; + } + + pll = pll_reg + index; + + s3c_freq_dbg("%s: target %u => %u\n", + __func__, target_freq, pll->frequency); + + target_freq = pll->frequency; + } + + return s3c_cpufreq_settarget(policy, target_freq, pll); + + err_notpossible: + printk(KERN_ERR "no compatible settings for %d\n", target_freq); + return -EINVAL; +} + +static unsigned int s3c_cpufreq_get(unsigned int cpu) +{ + return clk_get_rate(clk_arm) / 1000; +} + +struct clk *s3c_cpufreq_clk_get(struct device *dev, const char *name) +{ + struct clk *clk; + + clk = clk_get(dev, name); + if (IS_ERR(clk)) + printk(KERN_ERR "cpufreq: failed to get clock '%s'\n", name); + + return clk; +} + +static int s3c_cpufreq_init(struct cpufreq_policy *policy) +{ + printk(KERN_INFO "%s: initialising policy %p\n", __func__, policy); + + if (policy->cpu != 0) + return -EINVAL; + + policy->cur = s3c_cpufreq_get(0); + policy->min = policy->cpuinfo.min_freq = 0; + policy->max = policy->cpuinfo.max_freq = cpu_cur.info->max.fclk / 1000; + policy->governor = CPUFREQ_DEFAULT_GOVERNOR; + + /* feed the latency information from the cpu driver */ + policy->cpuinfo.transition_latency = cpu_cur.info->latency; + + if (ftab) + cpufreq_frequency_table_cpuinfo(policy, ftab); + + return 0; +} + +static __init int s3c_cpufreq_initclks(void) +{ + _clk_mpll = s3c_cpufreq_clk_get(NULL, "mpll"); + _clk_xtal = s3c_cpufreq_clk_get(NULL, "xtal"); + clk_fclk = s3c_cpufreq_clk_get(NULL, "fclk"); + clk_hclk = s3c_cpufreq_clk_get(NULL, "hclk"); + clk_pclk = s3c_cpufreq_clk_get(NULL, "pclk"); + clk_arm = s3c_cpufreq_clk_get(NULL, "armclk"); + + if (IS_ERR(clk_fclk) || IS_ERR(clk_hclk) || IS_ERR(clk_pclk) || + IS_ERR(_clk_mpll) || IS_ERR(clk_arm) || IS_ERR(_clk_xtal)) { + printk(KERN_ERR "%s: could not get clock(s)\n", __func__); + return -ENOENT; + } + + printk(KERN_INFO "%s: clocks f=%lu,h=%lu,p=%lu,a=%lu\n", __func__, + clk_get_rate(clk_fclk) / 1000, + clk_get_rate(clk_hclk) / 1000, + clk_get_rate(clk_pclk) / 1000, + clk_get_rate(clk_arm) / 1000); + + return 0; +} + +static int s3c_cpufreq_verify(struct cpufreq_policy *policy) +{ + if (policy->cpu != 0) + return -EINVAL; + + return 0; +} + +#ifdef CONFIG_PM +static struct cpufreq_frequency_table suspend_pll; +static unsigned int suspend_freq; + +static int s3c_cpufreq_suspend(struct cpufreq_policy *policy) +{ + suspend_pll.frequency = clk_get_rate(_clk_mpll); + suspend_pll.index = __raw_readl(S3C2410_MPLLCON); + suspend_freq = s3c_cpufreq_get(0) * 1000; + + return 0; +} + +static int s3c_cpufreq_resume(struct cpufreq_policy *policy) +{ + int ret; + + s3c_freq_dbg("%s: resuming with policy %p\n", __func__, policy); + + last_target = ~0; /* invalidate last_target setting */ + + /* first, find out what speed we resumed at. */ + s3c_cpufreq_resume_clocks(); + + /* whilst we will be called later on, we try and re-set the + * cpu frequencies as soon as possible so that we do not end + * up resuming devices and then immediately having to re-set + * a number of settings once these devices have restarted. + * + * as a note, it is expected devices are not used until they + * have been un-suspended and at that time they should have + * used the updated clock settings. + */ + + ret = s3c_cpufreq_settarget(NULL, suspend_freq, &suspend_pll); + if (ret) { + printk(KERN_ERR "%s: failed to reset pll/freq\n", __func__); + return ret; + } + + return 0; +} +#else +#define s3c_cpufreq_resume NULL +#define s3c_cpufreq_suspend NULL +#endif + +static struct cpufreq_driver s3c24xx_driver = { + .flags = CPUFREQ_STICKY, + .verify = s3c_cpufreq_verify, + .target = s3c_cpufreq_target, + .get = s3c_cpufreq_get, + .init = s3c_cpufreq_init, + .suspend = s3c_cpufreq_suspend, + .resume = s3c_cpufreq_resume, + .name = "s3c24xx", +}; + + +int __init s3c_cpufreq_register(struct s3c_cpufreq_info *info) +{ + if (!info || !info->name) { + printk(KERN_ERR "%s: failed to pass valid information\n", + __func__); + return -EINVAL; + } + + printk(KERN_INFO "S3C24XX CPU Frequency driver, %s cpu support\n", + info->name); + + /* check our driver info has valid data */ + + BUG_ON(info->set_refresh == NULL); + BUG_ON(info->set_divs == NULL); + BUG_ON(info->calc_divs == NULL); + + /* info->set_fvco is optional, depending on whether there + * is a need to set the clock code. */ + + cpu_cur.info = info; + + /* Note, driver registering should probably update locktime */ + + return 0; +} + +int __init s3c_cpufreq_setboard(struct s3c_cpufreq_board *board) +{ + struct s3c_cpufreq_board *ours; + + if (!board) { + printk(KERN_INFO "%s: no board data\n", __func__); + return -EINVAL; + } + + /* Copy the board information so that each board can make this + * initdata. */ + + ours = kzalloc(sizeof(struct s3c_cpufreq_board), GFP_KERNEL); + if (ours == NULL) { + printk(KERN_ERR "%s: no memory\n", __func__); + return -ENOMEM; + } + + *ours = *board; + cpu_cur.board = ours; + + return 0; +} + +int __init s3c_cpufreq_auto_io(void) +{ + int ret; + + if (!cpu_cur.info->get_iotiming) { + printk(KERN_ERR "%s: get_iotiming undefined\n", __func__); + return -ENOENT; + } + + printk(KERN_INFO "%s: working out IO settings\n", __func__); + + ret = (cpu_cur.info->get_iotiming)(&cpu_cur, &s3c24xx_iotiming); + if (ret) + printk(KERN_ERR "%s: failed to get timings\n", __func__); + + return ret; +} + +/* if one or is zero, then return the other, otherwise return the min */ +#define do_min(_a, _b) ((_a) == 0 ? (_b) : (_b) == 0 ? (_a) : min(_a, _b)) + +/** + * s3c_cpufreq_freq_min - find the minimum settings for the given freq. + * @dst: The destination structure + * @a: One argument. + * @b: The other argument. + * + * Create a minimum of each frequency entry in the 'struct s3c_freq', + * unless the entry is zero when it is ignored and the non-zero argument + * used. + */ +static void s3c_cpufreq_freq_min(struct s3c_freq *dst, + struct s3c_freq *a, struct s3c_freq *b) +{ + dst->fclk = do_min(a->fclk, b->fclk); + dst->hclk = do_min(a->hclk, b->hclk); + dst->pclk = do_min(a->pclk, b->pclk); + dst->armclk = do_min(a->armclk, b->armclk); +} + +static inline u32 calc_locktime(u32 freq, u32 time_us) +{ + u32 result; + + result = freq * time_us; + result = DIV_ROUND_UP(result, 1000 * 1000); + + return result; +} + +static void s3c_cpufreq_update_loctkime(void) +{ + unsigned int bits = cpu_cur.info->locktime_bits; + u32 rate = (u32)clk_get_rate(_clk_xtal); + u32 val; + + if (bits == 0) { + WARN_ON(1); + return; + } + + val = calc_locktime(rate, cpu_cur.info->locktime_u) << bits; + val |= calc_locktime(rate, cpu_cur.info->locktime_m); + + printk(KERN_INFO "%s: new locktime is 0x%08x\n", __func__, val); + __raw_writel(val, S3C2410_LOCKTIME); +} + +static int s3c_cpufreq_build_freq(void) +{ + int size, ret; + + if (!cpu_cur.info->calc_freqtable) + return -EINVAL; + + kfree(ftab); + ftab = NULL; + + size = cpu_cur.info->calc_freqtable(&cpu_cur, NULL, 0); + size++; + + ftab = kmalloc(sizeof(struct cpufreq_frequency_table) * size, GFP_KERNEL); + if (!ftab) { + printk(KERN_ERR "%s: no memory for tables\n", __func__); + return -ENOMEM; + } + + ftab_size = size; + + ret = cpu_cur.info->calc_freqtable(&cpu_cur, ftab, size); + s3c_cpufreq_addfreq(ftab, ret, size, CPUFREQ_TABLE_END); + + return 0; +} + +static int __init s3c_cpufreq_initcall(void) +{ + int ret = 0; + + if (cpu_cur.info && cpu_cur.board) { + ret = s3c_cpufreq_initclks(); + if (ret) + goto out; + + /* get current settings */ + s3c_cpufreq_getcur(&cpu_cur); + s3c_cpufreq_show("cur", &cpu_cur); + + if (cpu_cur.board->auto_io) { + ret = s3c_cpufreq_auto_io(); + if (ret) { + printk(KERN_ERR "%s: failed to get io timing\n", + __func__); + goto out; + } + } + + if (cpu_cur.board->need_io && !cpu_cur.info->set_iotiming) { + printk(KERN_ERR "%s: no IO support registered\n", + __func__); + ret = -EINVAL; + goto out; + } + + if (!cpu_cur.info->need_pll) + cpu_cur.lock_pll = 1; + + s3c_cpufreq_update_loctkime(); + + s3c_cpufreq_freq_min(&cpu_cur.max, &cpu_cur.board->max, + &cpu_cur.info->max); + + if (cpu_cur.info->calc_freqtable) + s3c_cpufreq_build_freq(); + + ret = cpufreq_register_driver(&s3c24xx_driver); + } + + out: + return ret; +} + +late_initcall(s3c_cpufreq_initcall); + +/** + * s3c_plltab_register - register CPU PLL table. + * @plls: The list of PLL entries. + * @plls_no: The size of the PLL entries @plls. + * + * Register the given set of PLLs with the system. + */ +int __init s3c_plltab_register(struct cpufreq_frequency_table *plls, + unsigned int plls_no) +{ + struct cpufreq_frequency_table *vals; + unsigned int size; + + size = sizeof(struct cpufreq_frequency_table) * (plls_no + 1); + + vals = kmalloc(size, GFP_KERNEL); + if (vals) { + memcpy(vals, plls, size); + pll_reg = vals; + + /* write a terminating entry, we don't store it in the + * table that is stored in the kernel */ + vals += plls_no; + vals->frequency = CPUFREQ_TABLE_END; + + printk(KERN_INFO "cpufreq: %d PLL entries\n", plls_no); + } else + printk(KERN_ERR "cpufreq: no memory for PLL tables\n"); + + return vals ? 0 : -ENOMEM; +} -- cgit v1.2.3 From af99a7507469d4fa6dd4d8d633e093b1ff7aff6e Mon Sep 17 00:00:00 2001 From: Heiko Stuebner Date: Tue, 21 May 2013 00:56:13 +0900 Subject: pinctrl: Add pinctrl-s3c24xx driver The s3c24xx pins follow a similar pattern as the other Samsung SoCs and can therefore reuse the already introduced infrastructure. The s3c24xx SoCs have one design oddity in that the first 4 external interrupts do not reside in the eint pending register but in the main interrupt controller instead. We solve this by forwarding the external interrupt from the main controller into the irq domain of the pin bank. The masking/acking of these interrupts is handled in the same way. Furthermore the S3C2412/2413 SoCs contain another oddity in that they keep the same 4 eints in the main interrupt controller and eintpend register and requiring ack operations to happen in both. This is solved by using different compatible properties for the wakeup eint node which set a property accordingly. Signed-off-by: Heiko Stuebner Reviewed-by: Tomasz Figa Reviewed-by: Sylwester Nawrocki Acked-by: Linus Walleij Signed-off-by: Kukjin Kim --- .../bindings/pinctrl/samsung-pinctrl.txt | 8 + drivers/gpio/gpio-samsung.c | 4 + drivers/pinctrl/Kconfig | 5 + drivers/pinctrl/Makefile | 1 + drivers/pinctrl/pinctrl-s3c24xx.c | 652 +++++++++++++++++++++ drivers/pinctrl/pinctrl-samsung.c | 10 + drivers/pinctrl/pinctrl-samsung.h | 4 + 7 files changed, 684 insertions(+) create mode 100644 drivers/pinctrl/pinctrl-s3c24xx.c diff --git a/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt index c70fca146e91..b2bc219e2003 100644 --- a/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt @@ -7,6 +7,10 @@ on-chip controllers onto these pads. Required Properties: - compatible: should be one of the following. + - "samsung,s3c2412-pinctrl": for S3C2412-compatible pin-controller, + - "samsung,s3c2416-pinctrl": for S3C2416-compatible pin-controller, + - "samsung,s3c2440-pinctrl": for S3C2440-compatible pin-controller, + - "samsung,s3c2450-pinctrl": for S3C2450-compatible pin-controller, - "samsung,s3c64xx-pinctrl": for S3C64xx-compatible pin-controller, - "samsung,exynos4210-pinctrl": for Exynos4210 compatible pin-controller. - "samsung,exynos4x12-pinctrl": for Exynos4x12 compatible pin-controller. @@ -106,6 +110,10 @@ B. External Wakeup Interrupts: For supporting external wakeup interrupts, a - compatible: identifies the type of the external wakeup interrupt controller The possible values are: + - samsung,s3c2410-wakeup-eint: represents wakeup interrupt controller + found on Samsung S3C24xx SoCs except S3C2412 and S3C2413, + - samsung,s3c2412-wakeup-eint: represents wakeup interrupt controller + found on Samsung S3C2412 and S3C2413 SoCs, - samsung,s3c64xx-wakeup-eint: represents wakeup interrupt controller found on Samsung S3C64xx SoCs, - samsung,exynos4210-wakeup-eint: represents wakeup interrupt controller diff --git a/drivers/gpio/gpio-samsung.c b/drivers/gpio/gpio-samsung.c index b22ca7933745..83a0d711b154 100644 --- a/drivers/gpio/gpio-samsung.c +++ b/drivers/gpio/gpio-samsung.c @@ -3026,6 +3026,10 @@ static __init int samsung_gpiolib_init(void) */ struct device_node *pctrl_np; static const struct of_device_id exynos_pinctrl_ids[] = { + { .compatible = "samsung,s3c2412-pinctrl", }, + { .compatible = "samsung,s3c2416-pinctrl", }, + { .compatible = "samsung,s3c2440-pinctrl", }, + { .compatible = "samsung,s3c2450-pinctrl", }, { .compatible = "samsung,exynos4210-pinctrl", }, { .compatible = "samsung,exynos4x12-pinctrl", }, { .compatible = "samsung,exynos5250-pinctrl", }, diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig index 8f6692438149..526a5d04c216 100644 --- a/drivers/pinctrl/Kconfig +++ b/drivers/pinctrl/Kconfig @@ -216,6 +216,11 @@ config PINCTRL_EXYNOS5440 select PINMUX select PINCONF +config PINCTRL_S3C24XX + bool "Samsung S3C24XX SoC pinctrl driver" + depends on ARCH_S3C24XX + select PINCTRL_SAMSUNG + config PINCTRL_S3C64XX bool "Samsung S3C64XX SoC pinctrl driver" depends on ARCH_S3C64XX diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile index 9bdaeb8785ce..f90b645fb601 100644 --- a/drivers/pinctrl/Makefile +++ b/drivers/pinctrl/Makefile @@ -42,6 +42,7 @@ obj-$(CONFIG_PINCTRL_COH901) += pinctrl-coh901.o obj-$(CONFIG_PINCTRL_SAMSUNG) += pinctrl-samsung.o obj-$(CONFIG_PINCTRL_EXYNOS) += pinctrl-exynos.o obj-$(CONFIG_PINCTRL_EXYNOS5440) += pinctrl-exynos5440.o +obj-$(CONFIG_PINCTRL_S3C24XX) += pinctrl-s3c24xx.o obj-$(CONFIG_PINCTRL_S3C64XX) += pinctrl-s3c64xx.o obj-$(CONFIG_PINCTRL_XWAY) += pinctrl-xway.o obj-$(CONFIG_PINCTRL_LANTIQ) += pinctrl-lantiq.o diff --git a/drivers/pinctrl/pinctrl-s3c24xx.c b/drivers/pinctrl/pinctrl-s3c24xx.c new file mode 100644 index 000000000000..c8b03996cdcb --- /dev/null +++ b/drivers/pinctrl/pinctrl-s3c24xx.c @@ -0,0 +1,652 @@ +/* + * S3C24XX specific support for Samsung pinctrl/gpiolib driver. + * + * Copyright (c) 2013 Heiko Stuebner + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This file contains the SamsungS3C24XX specific information required by the + * Samsung pinctrl/gpiolib driver. It also includes the implementation of + * external gpio and wakeup interrupt support. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#include "pinctrl-samsung.h" + +#define NUM_EINT 24 +#define NUM_EINT_IRQ 6 +#define EINT_MAX_PER_GROUP 8 + +#define EINTPEND_REG 0xa8 +#define EINTMASK_REG 0xa4 + +#define EINT_GROUP(i) ((int)((i) / EINT_MAX_PER_GROUP)) +#define EINT_REG(i) ((EINT_GROUP(i) * 4) + 0x88) +#define EINT_OFFS(i) ((i) % EINT_MAX_PER_GROUP * 4) + +#define EINT_LEVEL_LOW 0 +#define EINT_LEVEL_HIGH 1 +#define EINT_EDGE_FALLING 2 +#define EINT_EDGE_RISING 4 +#define EINT_EDGE_BOTH 6 +#define EINT_MASK 0xf + +static struct samsung_pin_bank_type bank_type_1bit = { + .fld_width = { 1, 1, }, + .reg_offset = { 0x00, 0x04, }, +}; + +static struct samsung_pin_bank_type bank_type_2bit = { + .fld_width = { 2, 1, 2, }, + .reg_offset = { 0x00, 0x04, 0x08, }, +}; + +#define PIN_BANK_A(pins, reg, id) \ + { \ + .type = &bank_type_1bit, \ + .pctl_offset = reg, \ + .nr_pins = pins, \ + .eint_type = EINT_TYPE_NONE, \ + .name = id \ + } + +#define PIN_BANK_2BIT(pins, reg, id) \ + { \ + .type = &bank_type_2bit, \ + .pctl_offset = reg, \ + .nr_pins = pins, \ + .eint_type = EINT_TYPE_NONE, \ + .name = id \ + } + +#define PIN_BANK_2BIT_EINTW(pins, reg, id, eoffs, emask)\ + { \ + .type = &bank_type_2bit, \ + .pctl_offset = reg, \ + .nr_pins = pins, \ + .eint_type = EINT_TYPE_WKUP, \ + .eint_func = 2, \ + .eint_mask = emask, \ + .eint_offset = eoffs, \ + .name = id \ + } + +/** + * struct s3c24xx_eint_data: EINT common data + * @drvdata: pin controller driver data + * @domains: IRQ domains of particular EINT interrupts + * @parents: mapped parent irqs in the main interrupt controller + */ +struct s3c24xx_eint_data { + struct samsung_pinctrl_drv_data *drvdata; + struct irq_domain *domains[NUM_EINT]; + int parents[NUM_EINT_IRQ]; +}; + +/** + * struct s3c24xx_eint_domain_data: per irq-domain data + * @bank: pin bank related to the domain + * @eint_data: common data + * eint0_3_parent_only: live eints 0-3 only in the main intc + */ +struct s3c24xx_eint_domain_data { + struct samsung_pin_bank *bank; + struct s3c24xx_eint_data *eint_data; + bool eint0_3_parent_only; +}; + +static int s3c24xx_eint_get_trigger(unsigned int type) +{ + switch (type) { + case IRQ_TYPE_EDGE_RISING: + return EINT_EDGE_RISING; + break; + case IRQ_TYPE_EDGE_FALLING: + return EINT_EDGE_FALLING; + break; + case IRQ_TYPE_EDGE_BOTH: + return EINT_EDGE_BOTH; + break; + case IRQ_TYPE_LEVEL_HIGH: + return EINT_LEVEL_HIGH; + break; + case IRQ_TYPE_LEVEL_LOW: + return EINT_LEVEL_LOW; + break; + default: + return -EINVAL; + } +} + +static void s3c24xx_eint_set_handler(unsigned int irq, unsigned int type) +{ + /* Edge- and level-triggered interrupts need different handlers */ + if (type & IRQ_TYPE_EDGE_BOTH) + __irq_set_handler_locked(irq, handle_edge_irq); + else + __irq_set_handler_locked(irq, handle_level_irq); +} + +static void s3c24xx_eint_set_function(struct samsung_pinctrl_drv_data *d, + struct samsung_pin_bank *bank, int pin) +{ + struct samsung_pin_bank_type *bank_type = bank->type; + unsigned long flags; + void __iomem *reg; + u8 shift; + u32 mask; + u32 val; + + /* Make sure that pin is configured as interrupt */ + reg = d->virt_base + bank->pctl_offset; + shift = pin * bank_type->fld_width[PINCFG_TYPE_FUNC]; + mask = (1 << bank_type->fld_width[PINCFG_TYPE_FUNC]) - 1; + + spin_lock_irqsave(&bank->slock, flags); + + val = readl(reg); + val &= ~(mask << shift); + val |= bank->eint_func << shift; + writel(val, reg); + + spin_unlock_irqrestore(&bank->slock, flags); +} + +static int s3c24xx_eint_type(struct irq_data *data, unsigned int type) +{ + struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(data); + struct samsung_pinctrl_drv_data *d = bank->drvdata; + int index = bank->eint_offset + data->hwirq; + void __iomem *reg; + int trigger; + u8 shift; + u32 val; + + trigger = s3c24xx_eint_get_trigger(type); + if (trigger < 0) { + dev_err(d->dev, "unsupported external interrupt type\n"); + return -EINVAL; + } + + s3c24xx_eint_set_handler(data->irq, type); + + /* Set up interrupt trigger */ + reg = d->virt_base + EINT_REG(index); + shift = EINT_OFFS(index); + + val = readl(reg); + val &= ~(EINT_MASK << shift); + val |= trigger << shift; + writel(val, reg); + + s3c24xx_eint_set_function(d, bank, data->hwirq); + + return 0; +} + +/* Handling of EINTs 0-3 on all except S3C2412 and S3C2413 */ + +static void s3c2410_eint0_3_ack(struct irq_data *data) +{ + struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(data); + struct s3c24xx_eint_domain_data *ddata = bank->irq_domain->host_data; + struct s3c24xx_eint_data *eint_data = ddata->eint_data; + int parent_irq = eint_data->parents[data->hwirq]; + struct irq_chip *parent_chip = irq_get_chip(parent_irq); + + parent_chip->irq_ack(irq_get_irq_data(parent_irq)); +} + +static void s3c2410_eint0_3_mask(struct irq_data *data) +{ + struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(data); + struct s3c24xx_eint_domain_data *ddata = bank->irq_domain->host_data; + struct s3c24xx_eint_data *eint_data = ddata->eint_data; + int parent_irq = eint_data->parents[data->hwirq]; + struct irq_chip *parent_chip = irq_get_chip(parent_irq); + + parent_chip->irq_mask(irq_get_irq_data(parent_irq)); +} + +static void s3c2410_eint0_3_unmask(struct irq_data *data) +{ + struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(data); + struct s3c24xx_eint_domain_data *ddata = bank->irq_domain->host_data; + struct s3c24xx_eint_data *eint_data = ddata->eint_data; + int parent_irq = eint_data->parents[data->hwirq]; + struct irq_chip *parent_chip = irq_get_chip(parent_irq); + + parent_chip->irq_unmask(irq_get_irq_data(parent_irq)); +} + +static struct irq_chip s3c2410_eint0_3_chip = { + .name = "s3c2410-eint0_3", + .irq_ack = s3c2410_eint0_3_ack, + .irq_mask = s3c2410_eint0_3_mask, + .irq_unmask = s3c2410_eint0_3_unmask, + .irq_set_type = s3c24xx_eint_type, +}; + +static void s3c2410_demux_eint0_3(unsigned int irq, struct irq_desc *desc) +{ + struct irq_data *data = irq_desc_get_irq_data(desc); + struct s3c24xx_eint_data *eint_data = irq_get_handler_data(irq); + unsigned int virq; + + /* the first 4 eints have a simple 1 to 1 mapping */ + virq = irq_linear_revmap(eint_data->domains[data->hwirq], data->hwirq); + /* Something must be really wrong if an unmapped EINT is unmasked */ + BUG_ON(!virq); + + generic_handle_irq(virq); +} + +/* Handling of EINTs 0-3 on S3C2412 and S3C2413 */ + +static void s3c2412_eint0_3_ack(struct irq_data *data) +{ + struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(data); + struct samsung_pinctrl_drv_data *d = bank->drvdata; + + unsigned long bitval = 1UL << data->hwirq; + writel(bitval, d->virt_base + EINTPEND_REG); +} + +static void s3c2412_eint0_3_mask(struct irq_data *data) +{ + struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(data); + struct samsung_pinctrl_drv_data *d = bank->drvdata; + unsigned long mask; + + mask = readl(d->virt_base + EINTMASK_REG); + mask |= (1UL << data->hwirq); + writel(mask, d->virt_base + EINTMASK_REG); +} + +static void s3c2412_eint0_3_unmask(struct irq_data *data) +{ + struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(data); + struct samsung_pinctrl_drv_data *d = bank->drvdata; + unsigned long mask; + + mask = readl(d->virt_base + EINTMASK_REG); + mask &= ~(1UL << data->hwirq); + writel(mask, d->virt_base + EINTMASK_REG); +} + +static struct irq_chip s3c2412_eint0_3_chip = { + .name = "s3c2412-eint0_3", + .irq_ack = s3c2412_eint0_3_ack, + .irq_mask = s3c2412_eint0_3_mask, + .irq_unmask = s3c2412_eint0_3_unmask, + .irq_set_type = s3c24xx_eint_type, +}; + +static void s3c2412_demux_eint0_3(unsigned int irq, struct irq_desc *desc) +{ + struct irq_chip *chip = irq_get_chip(irq); + struct irq_data *data = irq_desc_get_irq_data(desc); + struct s3c24xx_eint_data *eint_data = irq_get_handler_data(irq); + unsigned int virq; + + chained_irq_enter(chip, desc); + + /* the first 4 eints have a simple 1 to 1 mapping */ + virq = irq_linear_revmap(eint_data->domains[data->hwirq], data->hwirq); + /* Something must be really wrong if an unmapped EINT is unmasked */ + BUG_ON(!virq); + + generic_handle_irq(virq); + + chained_irq_exit(chip, desc); +} + +/* Handling of all other eints */ + +static void s3c24xx_eint_ack(struct irq_data *data) +{ + struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(data); + struct samsung_pinctrl_drv_data *d = bank->drvdata; + unsigned char index = bank->eint_offset + data->hwirq; + + writel(1UL << index, d->virt_base + EINTPEND_REG); +} + +static void s3c24xx_eint_mask(struct irq_data *data) +{ + struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(data); + struct samsung_pinctrl_drv_data *d = bank->drvdata; + unsigned char index = bank->eint_offset + data->hwirq; + unsigned long mask; + + mask = readl(d->virt_base + EINTMASK_REG); + mask |= (1UL << index); + writel(mask, d->virt_base + EINTMASK_REG); +} + +static void s3c24xx_eint_unmask(struct irq_data *data) +{ + struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(data); + struct samsung_pinctrl_drv_data *d = bank->drvdata; + unsigned char index = bank->eint_offset + data->hwirq; + unsigned long mask; + + mask = readl(d->virt_base + EINTMASK_REG); + mask &= ~(1UL << index); + writel(mask, d->virt_base + EINTMASK_REG); +} + +static struct irq_chip s3c24xx_eint_chip = { + .name = "s3c-eint", + .irq_ack = s3c24xx_eint_ack, + .irq_mask = s3c24xx_eint_mask, + .irq_unmask = s3c24xx_eint_unmask, + .irq_set_type = s3c24xx_eint_type, +}; + +static inline void s3c24xx_demux_eint(unsigned int irq, struct irq_desc *desc, + u32 offset, u32 range) +{ + struct irq_chip *chip = irq_get_chip(irq); + struct s3c24xx_eint_data *data = irq_get_handler_data(irq); + struct samsung_pinctrl_drv_data *d = data->drvdata; + unsigned int pend, mask; + + chained_irq_enter(chip, desc); + + pend = readl(d->virt_base + EINTPEND_REG); + mask = readl(d->virt_base + EINTMASK_REG); + + pend &= ~mask; + pend &= range; + + while (pend) { + unsigned int virq; + + irq = __ffs(pend); + pend &= ~(1 << irq); + virq = irq_linear_revmap(data->domains[irq], irq - offset); + /* Something is really wrong if an unmapped EINT is unmasked */ + BUG_ON(!virq); + + generic_handle_irq(virq); + } + + chained_irq_exit(chip, desc); +} + +static void s3c24xx_demux_eint4_7(unsigned int irq, struct irq_desc *desc) +{ + s3c24xx_demux_eint(irq, desc, 0, 0xf0); +} + +static void s3c24xx_demux_eint8_23(unsigned int irq, struct irq_desc *desc) +{ + s3c24xx_demux_eint(irq, desc, 8, 0xffff00); +} + +static irq_flow_handler_t s3c2410_eint_handlers[NUM_EINT_IRQ] = { + s3c2410_demux_eint0_3, + s3c2410_demux_eint0_3, + s3c2410_demux_eint0_3, + s3c2410_demux_eint0_3, + s3c24xx_demux_eint4_7, + s3c24xx_demux_eint8_23, +}; + +static irq_flow_handler_t s3c2412_eint_handlers[NUM_EINT_IRQ] = { + s3c2412_demux_eint0_3, + s3c2412_demux_eint0_3, + s3c2412_demux_eint0_3, + s3c2412_demux_eint0_3, + s3c24xx_demux_eint4_7, + s3c24xx_demux_eint8_23, +}; + +static int s3c24xx_gpf_irq_map(struct irq_domain *h, unsigned int virq, + irq_hw_number_t hw) +{ + struct s3c24xx_eint_domain_data *ddata = h->host_data; + struct samsung_pin_bank *bank = ddata->bank; + + if (!(bank->eint_mask & (1 << (bank->eint_offset + hw)))) + return -EINVAL; + + if (hw <= 3) { + if (ddata->eint0_3_parent_only) + irq_set_chip_and_handler(virq, &s3c2410_eint0_3_chip, + handle_edge_irq); + else + irq_set_chip_and_handler(virq, &s3c2412_eint0_3_chip, + handle_edge_irq); + } else { + irq_set_chip_and_handler(virq, &s3c24xx_eint_chip, + handle_edge_irq); + } + irq_set_chip_data(virq, bank); + set_irq_flags(virq, IRQF_VALID); + return 0; +} + +static const struct irq_domain_ops s3c24xx_gpf_irq_ops = { + .map = s3c24xx_gpf_irq_map, + .xlate = irq_domain_xlate_twocell, +}; + +static int s3c24xx_gpg_irq_map(struct irq_domain *h, unsigned int virq, + irq_hw_number_t hw) +{ + struct s3c24xx_eint_domain_data *ddata = h->host_data; + struct samsung_pin_bank *bank = ddata->bank; + + if (!(bank->eint_mask & (1 << (bank->eint_offset + hw)))) + return -EINVAL; + + irq_set_chip_and_handler(virq, &s3c24xx_eint_chip, handle_edge_irq); + irq_set_chip_data(virq, bank); + set_irq_flags(virq, IRQF_VALID); + return 0; +} + +static const struct irq_domain_ops s3c24xx_gpg_irq_ops = { + .map = s3c24xx_gpg_irq_map, + .xlate = irq_domain_xlate_twocell, +}; + +static const struct of_device_id s3c24xx_eint_irq_ids[] = { + { .compatible = "samsung,s3c2410-wakeup-eint", .data = (void *)1 }, + { .compatible = "samsung,s3c2412-wakeup-eint", .data = (void *)0 }, + { } +}; + +static int s3c24xx_eint_init(struct samsung_pinctrl_drv_data *d) +{ + struct device *dev = d->dev; + const struct of_device_id *match; + struct device_node *eint_np = NULL; + struct device_node *np; + struct samsung_pin_bank *bank; + struct s3c24xx_eint_data *eint_data; + const struct irq_domain_ops *ops; + unsigned int i; + bool eint0_3_parent_only; + irq_flow_handler_t *handlers; + + for_each_child_of_node(dev->of_node, np) { + match = of_match_node(s3c24xx_eint_irq_ids, np); + if (match) { + eint_np = np; + eint0_3_parent_only = (bool)match->data; + break; + } + } + if (!eint_np) + return -ENODEV; + + eint_data = devm_kzalloc(dev, sizeof(*eint_data), GFP_KERNEL); + if (!eint_data) + return -ENOMEM; + + eint_data->drvdata = d; + + handlers = eint0_3_parent_only ? s3c2410_eint_handlers + : s3c2412_eint_handlers; + for (i = 0; i < NUM_EINT_IRQ; ++i) { + unsigned int irq; + + irq = irq_of_parse_and_map(eint_np, i); + if (!irq) { + dev_err(dev, "failed to get wakeup EINT IRQ %d\n", i); + return -ENXIO; + } + + eint_data->parents[i] = irq; + irq_set_chained_handler(irq, handlers[i]); + irq_set_handler_data(irq, eint_data); + } + + bank = d->ctrl->pin_banks; + for (i = 0; i < d->ctrl->nr_banks; ++i, ++bank) { + struct s3c24xx_eint_domain_data *ddata; + unsigned int mask; + unsigned int irq; + unsigned int pin; + + if (bank->eint_type != EINT_TYPE_WKUP) + continue; + + ddata = devm_kzalloc(dev, sizeof(*ddata), GFP_KERNEL); + if (!ddata) + return -ENOMEM; + + ddata->bank = bank; + ddata->eint_data = eint_data; + ddata->eint0_3_parent_only = eint0_3_parent_only; + + ops = (bank->eint_offset == 0) ? &s3c24xx_gpf_irq_ops + : &s3c24xx_gpg_irq_ops; + + bank->irq_domain = irq_domain_add_linear(bank->of_node, + bank->nr_pins, ops, ddata); + if (!bank->irq_domain) { + dev_err(dev, "wkup irq domain add failed\n"); + return -ENXIO; + } + + irq = bank->eint_offset; + mask = bank->eint_mask; + for (pin = 0; mask; ++pin, mask >>= 1) { + if (irq > NUM_EINT) + break; + if (!(mask & 1)) + continue; + eint_data->domains[irq] = bank->irq_domain; + ++irq; + } + } + + return 0; +} + +static struct samsung_pin_bank s3c2412_pin_banks[] = { + PIN_BANK_A(23, 0x000, "gpa"), + PIN_BANK_2BIT(11, 0x010, "gpb"), + PIN_BANK_2BIT(16, 0x020, "gpc"), + PIN_BANK_2BIT(16, 0x030, "gpd"), + PIN_BANK_2BIT(16, 0x040, "gpe"), + PIN_BANK_2BIT_EINTW(8, 0x050, "gpf", 0, 0xff), + PIN_BANK_2BIT_EINTW(16, 0x060, "gpg", 8, 0xffff00), + PIN_BANK_2BIT(11, 0x070, "gph"), + PIN_BANK_2BIT(13, 0x080, "gpj"), +}; + +struct samsung_pin_ctrl s3c2412_pin_ctrl[] = { + { + .pin_banks = s3c2412_pin_banks, + .nr_banks = ARRAY_SIZE(s3c2412_pin_banks), + .eint_wkup_init = s3c24xx_eint_init, + .label = "S3C2412-GPIO", + }, +}; + +static struct samsung_pin_bank s3c2416_pin_banks[] = { + PIN_BANK_A(27, 0x000, "gpa"), + PIN_BANK_2BIT(11, 0x010, "gpb"), + PIN_BANK_2BIT(16, 0x020, "gpc"), + PIN_BANK_2BIT(16, 0x030, "gpd"), + PIN_BANK_2BIT(16, 0x040, "gpe"), + PIN_BANK_2BIT_EINTW(8, 0x050, "gpf", 0, 0xff), + PIN_BANK_2BIT_EINTW(8, 0x060, "gpg", 8, 0xff00), + PIN_BANK_2BIT(15, 0x070, "gph"), + PIN_BANK_2BIT(16, 0x0e0, "gpk"), + PIN_BANK_2BIT(14, 0x0f0, "gpl"), + PIN_BANK_2BIT(2, 0x100, "gpm"), +}; + +struct samsung_pin_ctrl s3c2416_pin_ctrl[] = { + { + .pin_banks = s3c2416_pin_banks, + .nr_banks = ARRAY_SIZE(s3c2416_pin_banks), + .eint_wkup_init = s3c24xx_eint_init, + .label = "S3C2416-GPIO", + }, +}; + +static struct samsung_pin_bank s3c2440_pin_banks[] = { + PIN_BANK_A(25, 0x000, "gpa"), + PIN_BANK_2BIT(11, 0x010, "gpb"), + PIN_BANK_2BIT(16, 0x020, "gpc"), + PIN_BANK_2BIT(16, 0x030, "gpd"), + PIN_BANK_2BIT(16, 0x040, "gpe"), + PIN_BANK_2BIT_EINTW(8, 0x050, "gpf", 0, 0xff), + PIN_BANK_2BIT_EINTW(16, 0x060, "gpg", 8, 0xffff00), + PIN_BANK_2BIT(11, 0x070, "gph"), + PIN_BANK_2BIT(13, 0x0d0, "gpj"), +}; + +struct samsung_pin_ctrl s3c2440_pin_ctrl[] = { + { + .pin_banks = s3c2440_pin_banks, + .nr_banks = ARRAY_SIZE(s3c2440_pin_banks), + .eint_wkup_init = s3c24xx_eint_init, + .label = "S3C2440-GPIO", + }, +}; + +static struct samsung_pin_bank s3c2450_pin_banks[] = { + PIN_BANK_A(28, 0x000, "gpa"), + PIN_BANK_2BIT(11, 0x010, "gpb"), + PIN_BANK_2BIT(16, 0x020, "gpc"), + PIN_BANK_2BIT(16, 0x030, "gpd"), + PIN_BANK_2BIT(16, 0x040, "gpe"), + PIN_BANK_2BIT_EINTW(8, 0x050, "gpf", 0, 0xff), + PIN_BANK_2BIT_EINTW(16, 0x060, "gpg", 8, 0xffff00), + PIN_BANK_2BIT(15, 0x070, "gph"), + PIN_BANK_2BIT(16, 0x0d0, "gpj"), + PIN_BANK_2BIT(16, 0x0e0, "gpk"), + PIN_BANK_2BIT(15, 0x0f0, "gpl"), + PIN_BANK_2BIT(2, 0x100, "gpm"), +}; + +struct samsung_pin_ctrl s3c2450_pin_ctrl[] = { + { + .pin_banks = s3c2450_pin_banks, + .nr_banks = ARRAY_SIZE(s3c2450_pin_banks), + .eint_wkup_init = s3c24xx_eint_init, + .label = "S3C2450-GPIO", + }, +}; diff --git a/drivers/pinctrl/pinctrl-samsung.c b/drivers/pinctrl/pinctrl-samsung.c index 976366899f68..e2102062f40f 100644 --- a/drivers/pinctrl/pinctrl-samsung.c +++ b/drivers/pinctrl/pinctrl-samsung.c @@ -976,6 +976,16 @@ static const struct of_device_id samsung_pinctrl_dt_match[] = { #ifdef CONFIG_PINCTRL_S3C64XX { .compatible = "samsung,s3c64xx-pinctrl", .data = s3c64xx_pin_ctrl }, +#endif +#ifdef CONFIG_PINCTRL_S3C24XX + { .compatible = "samsung,s3c2412-pinctrl", + .data = s3c2412_pin_ctrl }, + { .compatible = "samsung,s3c2416-pinctrl", + .data = s3c2416_pin_ctrl }, + { .compatible = "samsung,s3c2440-pinctrl", + .data = s3c2440_pin_ctrl }, + { .compatible = "samsung,s3c2450-pinctrl", + .data = s3c2450_pin_ctrl }, #endif {}, }; diff --git a/drivers/pinctrl/pinctrl-samsung.h b/drivers/pinctrl/pinctrl-samsung.h index 7c7f9ebcd05b..b2e850e91372 100644 --- a/drivers/pinctrl/pinctrl-samsung.h +++ b/drivers/pinctrl/pinctrl-samsung.h @@ -246,5 +246,9 @@ extern struct samsung_pin_ctrl exynos4210_pin_ctrl[]; extern struct samsung_pin_ctrl exynos4x12_pin_ctrl[]; extern struct samsung_pin_ctrl exynos5250_pin_ctrl[]; extern struct samsung_pin_ctrl s3c64xx_pin_ctrl[]; +extern struct samsung_pin_ctrl s3c2412_pin_ctrl[]; +extern struct samsung_pin_ctrl s3c2416_pin_ctrl[]; +extern struct samsung_pin_ctrl s3c2440_pin_ctrl[]; +extern struct samsung_pin_ctrl s3c2450_pin_ctrl[]; #endif /* __PINCTRL_SAMSUNG_H */ -- cgit v1.2.3 From 664a57ecb026dc47f9d8b002e6dcb557e877e4d1 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Fri, 3 May 2013 15:31:53 +0100 Subject: dmaengine: ste_dma40: Assign memcpy channels in the driver The channels reserved for memcpy are the same for all currently supported platforms. With this in mind, we can ease the platform data passing requirement by moving these assignments out from platform code and place them directly into the driver. Acked-by: Vinod Koul Acked-by: Arnd Bergmann Signed-off-by: Lee Jones Signed-off-by: Linus Walleij --- arch/arm/mach-ux500/devices-db8500.c | 12 ------------ drivers/dma/ste_dma40.c | 12 +++++++----- include/linux/platform_data/dma-ste-dma40.h | 4 ---- 3 files changed, 7 insertions(+), 21 deletions(-) diff --git a/arch/arm/mach-ux500/devices-db8500.c b/arch/arm/mach-ux500/devices-db8500.c index 1cf94ce0feec..159855fae55b 100644 --- a/arch/arm/mach-ux500/devices-db8500.c +++ b/arch/arm/mach-ux500/devices-db8500.c @@ -146,22 +146,10 @@ static const dma_addr_t dma40_rx_map[DB8500_DMA_NR_DEV] = { [DB8500_DMA_DEV48_CAC1_RX] = U8500_CRYP1_BASE + CRYP1_RX_REG_OFFSET, }; -/* Reserved event lines for memcpy only */ -static int dma40_memcpy_event[] = { - DB8500_DMA_MEMCPY_TX_0, - DB8500_DMA_MEMCPY_TX_1, - DB8500_DMA_MEMCPY_TX_2, - DB8500_DMA_MEMCPY_TX_3, - DB8500_DMA_MEMCPY_TX_4, - DB8500_DMA_MEMCPY_TX_5, -}; - static struct stedma40_platform_data dma40_plat_data = { .dev_len = DB8500_DMA_NR_DEV, .dev_rx = dma40_rx_map, .dev_tx = dma40_tx_map, - .memcpy = dma40_memcpy_event, - .memcpy_len = ARRAY_SIZE(dma40_memcpy_event), .memcpy_conf_phy = &dma40_memcpy_conf_phy, .memcpy_conf_log = &dma40_memcpy_conf_log, .disabled_channels = {-1}, diff --git a/drivers/dma/ste_dma40.c b/drivers/dma/ste_dma40.c index 1734feec47b1..12de79e84b15 100644 --- a/drivers/dma/ste_dma40.c +++ b/drivers/dma/ste_dma40.c @@ -55,6 +55,9 @@ #define MAX(a, b) (((a) < (b)) ? (b) : (a)) +/* Reserved event lines for memcpy only. */ +static int dma40_memcpy_channels[] = { 56, 57, 58, 59, 60 }; + /** * enum 40_command - The different commands and/or statuses. * @@ -2014,8 +2017,7 @@ static int d40_config_memcpy(struct d40_chan *d40c) if (dma_has_cap(DMA_MEMCPY, cap) && !dma_has_cap(DMA_SLAVE, cap)) { d40c->dma_cfg = *d40c->base->plat_data->memcpy_conf_log; d40c->dma_cfg.src_dev_type = STEDMA40_DEV_SRC_MEMORY; - d40c->dma_cfg.dst_dev_type = d40c->base->plat_data-> - memcpy[d40c->chan.chan_id]; + d40c->dma_cfg.dst_dev_type = dma40_memcpy_channels[d40c->chan.chan_id]; } else if (dma_has_cap(DMA_MEMCPY, cap) && dma_has_cap(DMA_SLAVE, cap)) { @@ -2927,7 +2929,7 @@ static int __init d40_dmaengine_init(struct d40_base *base, } d40_chan_init(base, &base->dma_memcpy, base->log_chans, - base->num_log_chans, base->plat_data->memcpy_len); + base->num_log_chans, ARRAY_SIZE(dma40_memcpy_channels)); dma_cap_zero(base->dma_memcpy.cap_mask); dma_cap_set(DMA_MEMCPY, base->dma_memcpy.cap_mask); @@ -3215,7 +3217,7 @@ static struct d40_base * __init d40_hw_detect_init(struct platform_device *pdev) num_log_chans++; base = kzalloc(ALIGN(sizeof(struct d40_base), 4) + - (num_phy_chans + num_log_chans + plat_data->memcpy_len) * + (num_phy_chans + num_log_chans + ARRAY_SIZE(dma40_memcpy_channels)) * sizeof(struct d40_chan), GFP_KERNEL); if (base == NULL) { @@ -3276,7 +3278,7 @@ static struct d40_base * __init d40_hw_detect_init(struct platform_device *pdev) if (!base->lookup_phy_chans) goto failure; - if (num_log_chans + plat_data->memcpy_len) { + if (num_log_chans + ARRAY_SIZE(dma40_memcpy_channels)) { /* * The max number of logical channels are event lines for all * src devices and dst devices diff --git a/include/linux/platform_data/dma-ste-dma40.h b/include/linux/platform_data/dma-ste-dma40.h index 4b781014b0a0..a8087843a99b 100644 --- a/include/linux/platform_data/dma-ste-dma40.h +++ b/include/linux/platform_data/dma-ste-dma40.h @@ -141,8 +141,6 @@ struct stedma40_chan_cfg { * @dev_len: length of dev_tx and dev_rx * @dev_tx: mapping between destination event line and io address * @dev_rx: mapping between source event line and io address - * @memcpy: list of memcpy event lines - * @memcpy_len: length of memcpy * @memcpy_conf_phy: default configuration of physical channel memcpy * @memcpy_conf_log: default configuration of logical channel memcpy * @disabled_channels: A vector, ending with -1, that marks physical channels @@ -162,8 +160,6 @@ struct stedma40_platform_data { u32 dev_len; const dma_addr_t *dev_tx; const dma_addr_t *dev_rx; - int *memcpy; - u32 memcpy_len; struct stedma40_chan_cfg *memcpy_conf_phy; struct stedma40_chan_cfg *memcpy_conf_log; int disabled_channels[STEDMA40_MAX_PHYS]; -- cgit v1.2.3 From a2acaa2163566ad2e04b10fdf81de650e9b9261b Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Fri, 3 May 2013 21:46:09 +0200 Subject: dmaengine: ste_dma40: Fix up static memcpy event lines The commit "dmaengine: ste_dma40: Assign memcpy channels in the driver" had two problems: - It assigned magic numbers to the memcpy event lines instead of giving them symbolic names. - It seems to have missed one of the memcpy event lines, number 51. This patch fixes it up. Acked-by: Lee Jones Acked-by: Vinod Koul Signed-off-by: Linus Walleij --- drivers/dma/ste_dma40.c | 16 +++++++++++++++- 1 file changed, 15 insertions(+), 1 deletion(-) diff --git a/drivers/dma/ste_dma40.c b/drivers/dma/ste_dma40.c index 12de79e84b15..cd7b4808d08c 100644 --- a/drivers/dma/ste_dma40.c +++ b/drivers/dma/ste_dma40.c @@ -56,7 +56,21 @@ #define MAX(a, b) (((a) < (b)) ? (b) : (a)) /* Reserved event lines for memcpy only. */ -static int dma40_memcpy_channels[] = { 56, 57, 58, 59, 60 }; +#define DB8500_DMA_MEMCPY_EV_0 51 +#define DB8500_DMA_MEMCPY_EV_1 56 +#define DB8500_DMA_MEMCPY_EV_2 57 +#define DB8500_DMA_MEMCPY_EV_3 58 +#define DB8500_DMA_MEMCPY_EV_4 59 +#define DB8500_DMA_MEMCPY_EV_5 60 + +static int dma40_memcpy_channels[] = { + DB8500_DMA_MEMCPY_EV_0, + DB8500_DMA_MEMCPY_EV_1, + DB8500_DMA_MEMCPY_EV_2, + DB8500_DMA_MEMCPY_EV_3, + DB8500_DMA_MEMCPY_EV_4, + DB8500_DMA_MEMCPY_EV_5, +}; /** * enum 40_command - The different commands and/or statuses. -- cgit v1.2.3 From 29027a1e1121a1c9c5e726cf09dc2e9789a282f3 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Fri, 3 May 2013 15:31:54 +0100 Subject: dmaengine: ste_dma40: Move default memcpy configs into the driver There are only two default memcpy configurations used for the DMA40 driver; one for physical memcpy and one for logical memcpy. Instead of invariably passing the same configurations though platform data, we're moving them into the driver instead. Acked-by: Vinod Koul Acked-by: Arnd Bergmann Acked-by: Linus Walleij Signed-off-by: Lee Jones Signed-off-by: Linus Walleij --- arch/arm/mach-ux500/devices-db8500.c | 28 ------------------------- drivers/dma/ste_dma40.c | 32 +++++++++++++++++++++++++++-- include/linux/platform_data/dma-ste-dma40.h | 4 ---- 3 files changed, 30 insertions(+), 34 deletions(-) diff --git a/arch/arm/mach-ux500/devices-db8500.c b/arch/arm/mach-ux500/devices-db8500.c index 159855fae55b..a30977b374ba 100644 --- a/arch/arm/mach-ux500/devices-db8500.c +++ b/arch/arm/mach-ux500/devices-db8500.c @@ -42,32 +42,6 @@ static struct resource dma40_resources[] = { } }; -/* Default configuration for physcial memcpy */ -struct stedma40_chan_cfg dma40_memcpy_conf_phy = { - .mode = STEDMA40_MODE_PHYSICAL, - .dir = STEDMA40_MEM_TO_MEM, - - .src_info.data_width = STEDMA40_BYTE_WIDTH, - .src_info.psize = STEDMA40_PSIZE_PHY_1, - .src_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL, - - .dst_info.data_width = STEDMA40_BYTE_WIDTH, - .dst_info.psize = STEDMA40_PSIZE_PHY_1, - .dst_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL, -}; -/* Default configuration for logical memcpy */ -struct stedma40_chan_cfg dma40_memcpy_conf_log = { - .dir = STEDMA40_MEM_TO_MEM, - - .src_info.data_width = STEDMA40_BYTE_WIDTH, - .src_info.psize = STEDMA40_PSIZE_LOG_1, - .src_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL, - - .dst_info.data_width = STEDMA40_BYTE_WIDTH, - .dst_info.psize = STEDMA40_PSIZE_LOG_1, - .dst_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL, -}; - /* * Mapping between destination event lines and physical device address. * The event line is tied to a device and therefore the address is constant. @@ -150,8 +124,6 @@ static struct stedma40_platform_data dma40_plat_data = { .dev_len = DB8500_DMA_NR_DEV, .dev_rx = dma40_rx_map, .dev_tx = dma40_tx_map, - .memcpy_conf_phy = &dma40_memcpy_conf_phy, - .memcpy_conf_log = &dma40_memcpy_conf_log, .disabled_channels = {-1}, }; diff --git a/drivers/dma/ste_dma40.c b/drivers/dma/ste_dma40.c index cd7b4808d08c..c47139ae8fa8 100644 --- a/drivers/dma/ste_dma40.c +++ b/drivers/dma/ste_dma40.c @@ -72,6 +72,34 @@ static int dma40_memcpy_channels[] = { DB8500_DMA_MEMCPY_EV_5, }; +/* Default configuration for physcial memcpy */ +struct stedma40_chan_cfg dma40_memcpy_conf_phy = { + .mode = STEDMA40_MODE_PHYSICAL, + .dir = STEDMA40_MEM_TO_MEM, + + .src_info.data_width = STEDMA40_BYTE_WIDTH, + .src_info.psize = STEDMA40_PSIZE_PHY_1, + .src_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL, + + .dst_info.data_width = STEDMA40_BYTE_WIDTH, + .dst_info.psize = STEDMA40_PSIZE_PHY_1, + .dst_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL, +}; + +/* Default configuration for logical memcpy */ +struct stedma40_chan_cfg dma40_memcpy_conf_log = { + .mode = STEDMA40_MODE_LOGICAL, + .dir = STEDMA40_MEM_TO_MEM, + + .src_info.data_width = STEDMA40_BYTE_WIDTH, + .src_info.psize = STEDMA40_PSIZE_LOG_1, + .src_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL, + + .dst_info.data_width = STEDMA40_BYTE_WIDTH, + .dst_info.psize = STEDMA40_PSIZE_LOG_1, + .dst_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL, +}; + /** * enum 40_command - The different commands and/or statuses. * @@ -2029,13 +2057,13 @@ static int d40_config_memcpy(struct d40_chan *d40c) dma_cap_mask_t cap = d40c->chan.device->cap_mask; if (dma_has_cap(DMA_MEMCPY, cap) && !dma_has_cap(DMA_SLAVE, cap)) { - d40c->dma_cfg = *d40c->base->plat_data->memcpy_conf_log; + d40c->dma_cfg = dma40_memcpy_conf_log; d40c->dma_cfg.src_dev_type = STEDMA40_DEV_SRC_MEMORY; d40c->dma_cfg.dst_dev_type = dma40_memcpy_channels[d40c->chan.chan_id]; } else if (dma_has_cap(DMA_MEMCPY, cap) && dma_has_cap(DMA_SLAVE, cap)) { - d40c->dma_cfg = *d40c->base->plat_data->memcpy_conf_phy; + d40c->dma_cfg = dma40_memcpy_conf_phy; } else { chan_err(d40c, "No memcpy\n"); return -EINVAL; diff --git a/include/linux/platform_data/dma-ste-dma40.h b/include/linux/platform_data/dma-ste-dma40.h index a8087843a99b..869c571c8c08 100644 --- a/include/linux/platform_data/dma-ste-dma40.h +++ b/include/linux/platform_data/dma-ste-dma40.h @@ -141,8 +141,6 @@ struct stedma40_chan_cfg { * @dev_len: length of dev_tx and dev_rx * @dev_tx: mapping between destination event line and io address * @dev_rx: mapping between source event line and io address - * @memcpy_conf_phy: default configuration of physical channel memcpy - * @memcpy_conf_log: default configuration of logical channel memcpy * @disabled_channels: A vector, ending with -1, that marks physical channels * that are for different reasons not available for the driver. * @soft_lli_chans: A vector, that marks physical channels will use LLI by SW @@ -160,8 +158,6 @@ struct stedma40_platform_data { u32 dev_len; const dma_addr_t *dev_tx; const dma_addr_t *dev_rx; - struct stedma40_chan_cfg *memcpy_conf_phy; - struct stedma40_chan_cfg *memcpy_conf_log; int disabled_channels[STEDMA40_MAX_PHYS]; int *soft_lli_chans; int num_of_soft_lli_chans; -- cgit v1.2.3 From 4f8fc46c797015dddc1d4c76e1b485b57373683b Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Fri, 3 May 2013 15:31:55 +0100 Subject: dmaengine: ste_dma40: Rectify incorrect configuration validation checking If we compare an event's group (dev_type / 16) with STEDMA40_DEV_DST_MEMORY (-1), the only way we'd obtain a positive result is if we passed -16 as a device type, which is unfeasible. Instead, it would be much more sane to compare STEDMA40_DEV_DST_MEMORY against the raw dev_type in order to expect the expected result. Acked-by: Vinod Koul Signed-off-by: Lee Jones Signed-off-by: Linus Walleij --- drivers/dma/ste_dma40.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/dma/ste_dma40.c b/drivers/dma/ste_dma40.c index c47139ae8fa8..d481cb8521d9 100644 --- a/drivers/dma/ste_dma40.c +++ b/drivers/dma/ste_dma40.c @@ -1785,19 +1785,19 @@ static int d40_validate_conf(struct d40_chan *d40c, } if (conf->dir == STEDMA40_MEM_TO_PERIPH && - dst_event_group == STEDMA40_DEV_DST_MEMORY) { + conf->dst_dev_type == STEDMA40_DEV_DST_MEMORY) { chan_err(d40c, "Invalid dst\n"); res = -EINVAL; } if (conf->dir == STEDMA40_PERIPH_TO_MEM && - src_event_group == STEDMA40_DEV_SRC_MEMORY) { + conf->src_dev_type == STEDMA40_DEV_SRC_MEMORY) { chan_err(d40c, "Invalid src\n"); res = -EINVAL; } - if (src_event_group == STEDMA40_DEV_SRC_MEMORY && - dst_event_group == STEDMA40_DEV_DST_MEMORY && is_log) { + if (conf->src_dev_type == STEDMA40_DEV_SRC_MEMORY && + conf->dst_dev_type == STEDMA40_DEV_DST_MEMORY && is_log) { chan_err(d40c, "No event line\n"); res = -EINVAL; } -- cgit v1.2.3 From 26955c07dcf3c36b6427e52fec0f725300ca079e Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Fri, 3 May 2013 15:31:56 +0100 Subject: dmaengine: ste_dma40: Amalgamate DMA source and destination channel numbers Devices which utilise DMA use the same device numbers for transmitting and receiving. In this patch we encode the source and destination information into one single attribute. We can subsequently exploit the direction attribute to see which of the transfer directions are being described. This also lessens the burden on platform data. Cc: Dan Williams Cc: Per Forlin Cc: Rabin Vincent Acked-by: Vinod Koul Acked-by: Arnd Bergmann Signed-off-by: Lee Jones Signed-off-by: Linus Walleij --- arch/arm/mach-ux500/board-mop500-audio.c | 18 +-- arch/arm/mach-ux500/board-mop500-sdi.c | 24 ++-- arch/arm/mach-ux500/board-mop500.c | 33 ++--- arch/arm/mach-ux500/cpu-db8500.c | 32 ++--- arch/arm/mach-ux500/devices-db8500.c | 120 ++++++++--------- arch/arm/mach-ux500/ste-dma40-db8500.h | 193 ++++++++++------------------ arch/arm/mach-ux500/usb.c | 10 +- drivers/dma/ste_dma40.c | 93 +++++--------- drivers/dma/ste_dma40_ll.c | 4 +- include/linux/platform_data/dma-ste-dma40.h | 6 +- 10 files changed, 207 insertions(+), 326 deletions(-) diff --git a/arch/arm/mach-ux500/board-mop500-audio.c b/arch/arm/mach-ux500/board-mop500-audio.c index aba9e5692958..5a968fa8b90c 100644 --- a/arch/arm/mach-ux500/board-mop500-audio.c +++ b/arch/arm/mach-ux500/board-mop500-audio.c @@ -23,8 +23,7 @@ static struct stedma40_chan_cfg msp0_dma_rx = { .high_priority = true, .dir = STEDMA40_PERIPH_TO_MEM, - .src_dev_type = DB8500_DMA_DEV31_MSP0_RX_SLIM0_CH0_RX, - .dst_dev_type = STEDMA40_DEV_DST_MEMORY, + .dev_type = DB8500_DMA_DEV31_MSP0_SLIM0_CH0, .src_info.psize = STEDMA40_PSIZE_LOG_4, .dst_info.psize = STEDMA40_PSIZE_LOG_4, @@ -36,8 +35,7 @@ static struct stedma40_chan_cfg msp0_dma_tx = { .high_priority = true, .dir = STEDMA40_MEM_TO_PERIPH, - .src_dev_type = STEDMA40_DEV_DST_MEMORY, - .dst_dev_type = DB8500_DMA_DEV31_MSP0_TX_SLIM0_CH0_TX, + .dev_type = DB8500_DMA_DEV31_MSP0_SLIM0_CH0, .src_info.psize = STEDMA40_PSIZE_LOG_4, .dst_info.psize = STEDMA40_PSIZE_LOG_4, @@ -55,8 +53,7 @@ static struct stedma40_chan_cfg msp1_dma_rx = { .high_priority = true, .dir = STEDMA40_PERIPH_TO_MEM, - .src_dev_type = DB8500_DMA_DEV30_MSP3_RX, - .dst_dev_type = STEDMA40_DEV_DST_MEMORY, + .dev_type = DB8500_DMA_DEV30_MSP3, .src_info.psize = STEDMA40_PSIZE_LOG_4, .dst_info.psize = STEDMA40_PSIZE_LOG_4, @@ -68,8 +65,7 @@ static struct stedma40_chan_cfg msp1_dma_tx = { .high_priority = true, .dir = STEDMA40_MEM_TO_PERIPH, - .src_dev_type = STEDMA40_DEV_DST_MEMORY, - .dst_dev_type = DB8500_DMA_DEV30_MSP1_TX, + .dev_type = DB8500_DMA_DEV30_MSP1, .src_info.psize = STEDMA40_PSIZE_LOG_4, .dst_info.psize = STEDMA40_PSIZE_LOG_4, @@ -87,8 +83,7 @@ static struct stedma40_chan_cfg msp2_dma_rx = { .high_priority = true, .dir = STEDMA40_PERIPH_TO_MEM, - .src_dev_type = DB8500_DMA_DEV14_MSP2_RX, - .dst_dev_type = STEDMA40_DEV_DST_MEMORY, + .dev_type = DB8500_DMA_DEV14_MSP2, /* MSP2 DMA doesn't work with PSIZE == 4 on DB8500v2 */ .src_info.psize = STEDMA40_PSIZE_LOG_1, @@ -101,8 +96,7 @@ static struct stedma40_chan_cfg msp2_dma_tx = { .high_priority = true, .dir = STEDMA40_MEM_TO_PERIPH, - .src_dev_type = STEDMA40_DEV_DST_MEMORY, - .dst_dev_type = DB8500_DMA_DEV14_MSP2_TX, + .dev_type = DB8500_DMA_DEV14_MSP2, .src_info.psize = STEDMA40_PSIZE_LOG_4, .dst_info.psize = STEDMA40_PSIZE_LOG_4, diff --git a/arch/arm/mach-ux500/board-mop500-sdi.c b/arch/arm/mach-ux500/board-mop500-sdi.c index 0ef38775a0c1..4e30b6dc9ac5 100644 --- a/arch/arm/mach-ux500/board-mop500-sdi.c +++ b/arch/arm/mach-ux500/board-mop500-sdi.c @@ -35,8 +35,7 @@ struct stedma40_chan_cfg mop500_sdi0_dma_cfg_rx = { .mode = STEDMA40_MODE_LOGICAL, .dir = STEDMA40_PERIPH_TO_MEM, - .src_dev_type = DB8500_DMA_DEV29_SD_MM0_RX, - .dst_dev_type = STEDMA40_DEV_DST_MEMORY, + .dev_type = DB8500_DMA_DEV29_SD_MM0, .src_info.data_width = STEDMA40_WORD_WIDTH, .dst_info.data_width = STEDMA40_WORD_WIDTH, }; @@ -44,8 +43,7 @@ struct stedma40_chan_cfg mop500_sdi0_dma_cfg_rx = { static struct stedma40_chan_cfg mop500_sdi0_dma_cfg_tx = { .mode = STEDMA40_MODE_LOGICAL, .dir = STEDMA40_MEM_TO_PERIPH, - .src_dev_type = STEDMA40_DEV_SRC_MEMORY, - .dst_dev_type = DB8500_DMA_DEV29_SD_MM0_TX, + .dev_type = DB8500_DMA_DEV29_SD_MM0, .src_info.data_width = STEDMA40_WORD_WIDTH, .dst_info.data_width = STEDMA40_WORD_WIDTH, }; @@ -88,8 +86,7 @@ void mop500_sdi_tc35892_init(struct device *parent) static struct stedma40_chan_cfg sdi1_dma_cfg_rx = { .mode = STEDMA40_MODE_LOGICAL, .dir = STEDMA40_PERIPH_TO_MEM, - .src_dev_type = DB8500_DMA_DEV32_SD_MM1_RX, - .dst_dev_type = STEDMA40_DEV_DST_MEMORY, + .dev_type = DB8500_DMA_DEV32_SD_MM1, .src_info.data_width = STEDMA40_WORD_WIDTH, .dst_info.data_width = STEDMA40_WORD_WIDTH, }; @@ -97,8 +94,7 @@ static struct stedma40_chan_cfg sdi1_dma_cfg_rx = { static struct stedma40_chan_cfg sdi1_dma_cfg_tx = { .mode = STEDMA40_MODE_LOGICAL, .dir = STEDMA40_MEM_TO_PERIPH, - .src_dev_type = STEDMA40_DEV_SRC_MEMORY, - .dst_dev_type = DB8500_DMA_DEV32_SD_MM1_TX, + .dev_type = DB8500_DMA_DEV32_SD_MM1, .src_info.data_width = STEDMA40_WORD_WIDTH, .dst_info.data_width = STEDMA40_WORD_WIDTH, }; @@ -125,8 +121,7 @@ struct mmci_platform_data mop500_sdi1_data = { struct stedma40_chan_cfg mop500_sdi2_dma_cfg_rx = { .mode = STEDMA40_MODE_LOGICAL, .dir = STEDMA40_PERIPH_TO_MEM, - .src_dev_type = DB8500_DMA_DEV28_SD_MM2_RX, - .dst_dev_type = STEDMA40_DEV_DST_MEMORY, + .dev_type = DB8500_DMA_DEV28_SD_MM2, .src_info.data_width = STEDMA40_WORD_WIDTH, .dst_info.data_width = STEDMA40_WORD_WIDTH, }; @@ -134,8 +129,7 @@ struct stedma40_chan_cfg mop500_sdi2_dma_cfg_rx = { static struct stedma40_chan_cfg mop500_sdi2_dma_cfg_tx = { .mode = STEDMA40_MODE_LOGICAL, .dir = STEDMA40_MEM_TO_PERIPH, - .src_dev_type = STEDMA40_DEV_SRC_MEMORY, - .dst_dev_type = DB8500_DMA_DEV28_SD_MM2_TX, + .dev_type = DB8500_DMA_DEV28_SD_MM2, .src_info.data_width = STEDMA40_WORD_WIDTH, .dst_info.data_width = STEDMA40_WORD_WIDTH, }; @@ -163,8 +157,7 @@ struct mmci_platform_data mop500_sdi2_data = { struct stedma40_chan_cfg mop500_sdi4_dma_cfg_rx = { .mode = STEDMA40_MODE_LOGICAL, .dir = STEDMA40_PERIPH_TO_MEM, - .src_dev_type = DB8500_DMA_DEV42_SD_MM4_RX, - .dst_dev_type = STEDMA40_DEV_DST_MEMORY, + .dev_type = DB8500_DMA_DEV42_SD_MM4, .src_info.data_width = STEDMA40_WORD_WIDTH, .dst_info.data_width = STEDMA40_WORD_WIDTH, }; @@ -172,8 +165,7 @@ struct stedma40_chan_cfg mop500_sdi4_dma_cfg_rx = { static struct stedma40_chan_cfg mop500_sdi4_dma_cfg_tx = { .mode = STEDMA40_MODE_LOGICAL, .dir = STEDMA40_MEM_TO_PERIPH, - .src_dev_type = STEDMA40_DEV_SRC_MEMORY, - .dst_dev_type = DB8500_DMA_DEV42_SD_MM4_TX, + .dev_type = DB8500_DMA_DEV42_SD_MM4, .src_info.data_width = STEDMA40_WORD_WIDTH, .dst_info.data_width = STEDMA40_WORD_WIDTH, }; diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c index 3cd555ac6d0a..871e61517fb2 100644 --- a/arch/arm/mach-ux500/board-mop500.c +++ b/arch/arm/mach-ux500/board-mop500.c @@ -425,8 +425,7 @@ void mop500_snowball_ethernet_clock_enable(void) static struct cryp_platform_data u8500_cryp1_platform_data = { .mem_to_engine = { .dir = STEDMA40_MEM_TO_PERIPH, - .src_dev_type = STEDMA40_DEV_SRC_MEMORY, - .dst_dev_type = DB8500_DMA_DEV48_CAC1_TX, + .dev_type = DB8500_DMA_DEV48_CAC1, .src_info.data_width = STEDMA40_WORD_WIDTH, .dst_info.data_width = STEDMA40_WORD_WIDTH, .mode = STEDMA40_MODE_LOGICAL, @@ -435,8 +434,7 @@ static struct cryp_platform_data u8500_cryp1_platform_data = { }, .engine_to_mem = { .dir = STEDMA40_PERIPH_TO_MEM, - .src_dev_type = DB8500_DMA_DEV48_CAC1_RX, - .dst_dev_type = STEDMA40_DEV_DST_MEMORY, + .dev_type = DB8500_DMA_DEV48_CAC1, .src_info.data_width = STEDMA40_WORD_WIDTH, .dst_info.data_width = STEDMA40_WORD_WIDTH, .mode = STEDMA40_MODE_LOGICAL, @@ -447,8 +445,7 @@ static struct cryp_platform_data u8500_cryp1_platform_data = { static struct stedma40_chan_cfg u8500_hash_dma_cfg_tx = { .dir = STEDMA40_MEM_TO_PERIPH, - .src_dev_type = STEDMA40_DEV_SRC_MEMORY, - .dst_dev_type = DB8500_DMA_DEV50_HAC1_TX, + .dev_type = DB8500_DMA_DEV50_HAC1_TX, .src_info.data_width = STEDMA40_WORD_WIDTH, .dst_info.data_width = STEDMA40_WORD_WIDTH, .mode = STEDMA40_MODE_LOGICAL, @@ -471,8 +468,7 @@ static struct platform_device *mop500_platform_devs[] __initdata = { static struct stedma40_chan_cfg ssp0_dma_cfg_rx = { .mode = STEDMA40_MODE_LOGICAL, .dir = STEDMA40_PERIPH_TO_MEM, - .src_dev_type = DB8500_DMA_DEV8_SSP0_RX, - .dst_dev_type = STEDMA40_DEV_DST_MEMORY, + .dev_type = DB8500_DMA_DEV8_SSP0, .src_info.data_width = STEDMA40_BYTE_WIDTH, .dst_info.data_width = STEDMA40_BYTE_WIDTH, }; @@ -480,8 +476,7 @@ static struct stedma40_chan_cfg ssp0_dma_cfg_rx = { static struct stedma40_chan_cfg ssp0_dma_cfg_tx = { .mode = STEDMA40_MODE_LOGICAL, .dir = STEDMA40_MEM_TO_PERIPH, - .src_dev_type = STEDMA40_DEV_SRC_MEMORY, - .dst_dev_type = DB8500_DMA_DEV8_SSP0_TX, + .dev_type = DB8500_DMA_DEV8_SSP0, .src_info.data_width = STEDMA40_BYTE_WIDTH, .dst_info.data_width = STEDMA40_BYTE_WIDTH, }; @@ -512,8 +507,7 @@ static void __init mop500_spi_init(struct device *parent) static struct stedma40_chan_cfg uart0_dma_cfg_rx = { .mode = STEDMA40_MODE_LOGICAL, .dir = STEDMA40_PERIPH_TO_MEM, - .src_dev_type = DB8500_DMA_DEV13_UART0_RX, - .dst_dev_type = STEDMA40_DEV_DST_MEMORY, + .dev_type = DB8500_DMA_DEV13_UART0, .src_info.data_width = STEDMA40_BYTE_WIDTH, .dst_info.data_width = STEDMA40_BYTE_WIDTH, }; @@ -521,8 +515,7 @@ static struct stedma40_chan_cfg uart0_dma_cfg_rx = { static struct stedma40_chan_cfg uart0_dma_cfg_tx = { .mode = STEDMA40_MODE_LOGICAL, .dir = STEDMA40_MEM_TO_PERIPH, - .src_dev_type = STEDMA40_DEV_SRC_MEMORY, - .dst_dev_type = DB8500_DMA_DEV13_UART0_TX, + .dev_type = DB8500_DMA_DEV13_UART0, .src_info.data_width = STEDMA40_BYTE_WIDTH, .dst_info.data_width = STEDMA40_BYTE_WIDTH, }; @@ -530,8 +523,7 @@ static struct stedma40_chan_cfg uart0_dma_cfg_tx = { static struct stedma40_chan_cfg uart1_dma_cfg_rx = { .mode = STEDMA40_MODE_LOGICAL, .dir = STEDMA40_PERIPH_TO_MEM, - .src_dev_type = DB8500_DMA_DEV12_UART1_RX, - .dst_dev_type = STEDMA40_DEV_DST_MEMORY, + .dev_type = DB8500_DMA_DEV12_UART1, .src_info.data_width = STEDMA40_BYTE_WIDTH, .dst_info.data_width = STEDMA40_BYTE_WIDTH, }; @@ -539,8 +531,7 @@ static struct stedma40_chan_cfg uart1_dma_cfg_rx = { static struct stedma40_chan_cfg uart1_dma_cfg_tx = { .mode = STEDMA40_MODE_LOGICAL, .dir = STEDMA40_MEM_TO_PERIPH, - .src_dev_type = STEDMA40_DEV_SRC_MEMORY, - .dst_dev_type = DB8500_DMA_DEV12_UART1_TX, + .dev_type = DB8500_DMA_DEV12_UART1, .src_info.data_width = STEDMA40_BYTE_WIDTH, .dst_info.data_width = STEDMA40_BYTE_WIDTH, }; @@ -548,8 +539,7 @@ static struct stedma40_chan_cfg uart1_dma_cfg_tx = { static struct stedma40_chan_cfg uart2_dma_cfg_rx = { .mode = STEDMA40_MODE_LOGICAL, .dir = STEDMA40_PERIPH_TO_MEM, - .src_dev_type = DB8500_DMA_DEV11_UART2_RX, - .dst_dev_type = STEDMA40_DEV_DST_MEMORY, + .dev_type = DB8500_DMA_DEV11_UART2, .src_info.data_width = STEDMA40_BYTE_WIDTH, .dst_info.data_width = STEDMA40_BYTE_WIDTH, }; @@ -557,8 +547,7 @@ static struct stedma40_chan_cfg uart2_dma_cfg_rx = { static struct stedma40_chan_cfg uart2_dma_cfg_tx = { .mode = STEDMA40_MODE_LOGICAL, .dir = STEDMA40_MEM_TO_PERIPH, - .src_dev_type = STEDMA40_DEV_SRC_MEMORY, - .dst_dev_type = DB8500_DMA_DEV11_UART2_TX, + .dev_type = DB8500_DMA_DEV11_UART2, .src_info.data_width = STEDMA40_BYTE_WIDTH, .dst_info.data_width = STEDMA40_BYTE_WIDTH, }; diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c index e90b5ab23b6d..67d68e05f3a7 100644 --- a/arch/arm/mach-ux500/cpu-db8500.c +++ b/arch/arm/mach-ux500/cpu-db8500.c @@ -163,25 +163,25 @@ static void __init db8500_add_gpios(struct device *parent) } static int usb_db8500_rx_dma_cfg[] = { - DB8500_DMA_DEV38_USB_OTG_IEP_1_9, - DB8500_DMA_DEV37_USB_OTG_IEP_2_10, - DB8500_DMA_DEV36_USB_OTG_IEP_3_11, - DB8500_DMA_DEV19_USB_OTG_IEP_4_12, - DB8500_DMA_DEV18_USB_OTG_IEP_5_13, - DB8500_DMA_DEV17_USB_OTG_IEP_6_14, - DB8500_DMA_DEV16_USB_OTG_IEP_7_15, - DB8500_DMA_DEV39_USB_OTG_IEP_8 + DB8500_DMA_DEV38_USB_OTG_IEP_AND_OEP_1_9, + DB8500_DMA_DEV37_USB_OTG_IEP_AND_OEP_2_10, + DB8500_DMA_DEV36_USB_OTG_IEP_AND_OEP_3_11, + DB8500_DMA_DEV19_USB_OTG_IEP_AND_OEP_4_12, + DB8500_DMA_DEV18_USB_OTG_IEP_AND_OEP_5_13, + DB8500_DMA_DEV17_USB_OTG_IEP_AND_OEP_6_14, + DB8500_DMA_DEV16_USB_OTG_IEP_AND_OEP_7_15, + DB8500_DMA_DEV39_USB_OTG_IEP_AND_OEP_8 }; static int usb_db8500_tx_dma_cfg[] = { - DB8500_DMA_DEV38_USB_OTG_OEP_1_9, - DB8500_DMA_DEV37_USB_OTG_OEP_2_10, - DB8500_DMA_DEV36_USB_OTG_OEP_3_11, - DB8500_DMA_DEV19_USB_OTG_OEP_4_12, - DB8500_DMA_DEV18_USB_OTG_OEP_5_13, - DB8500_DMA_DEV17_USB_OTG_OEP_6_14, - DB8500_DMA_DEV16_USB_OTG_OEP_7_15, - DB8500_DMA_DEV39_USB_OTG_OEP_8 + DB8500_DMA_DEV38_USB_OTG_IEP_AND_OEP_1_9, + DB8500_DMA_DEV37_USB_OTG_IEP_AND_OEP_2_10, + DB8500_DMA_DEV36_USB_OTG_IEP_AND_OEP_3_11, + DB8500_DMA_DEV19_USB_OTG_IEP_AND_OEP_4_12, + DB8500_DMA_DEV18_USB_OTG_IEP_AND_OEP_5_13, + DB8500_DMA_DEV17_USB_OTG_IEP_AND_OEP_6_14, + DB8500_DMA_DEV16_USB_OTG_IEP_AND_OEP_7_15, + DB8500_DMA_DEV39_USB_OTG_IEP_AND_OEP_8 }; static const char *db8500_read_soc_id(void) diff --git a/arch/arm/mach-ux500/devices-db8500.c b/arch/arm/mach-ux500/devices-db8500.c index a30977b374ba..7989c564e47a 100644 --- a/arch/arm/mach-ux500/devices-db8500.c +++ b/arch/arm/mach-ux500/devices-db8500.c @@ -50,74 +50,74 @@ static struct resource dma40_resources[] = { */ static const dma_addr_t dma40_tx_map[DB8500_DMA_NR_DEV] = { /* MUSB - these will be runtime-reconfigured */ - [DB8500_DMA_DEV39_USB_OTG_OEP_8] = -1, - [DB8500_DMA_DEV16_USB_OTG_OEP_7_15] = -1, - [DB8500_DMA_DEV17_USB_OTG_OEP_6_14] = -1, - [DB8500_DMA_DEV18_USB_OTG_OEP_5_13] = -1, - [DB8500_DMA_DEV19_USB_OTG_OEP_4_12] = -1, - [DB8500_DMA_DEV36_USB_OTG_OEP_3_11] = -1, - [DB8500_DMA_DEV37_USB_OTG_OEP_2_10] = -1, - [DB8500_DMA_DEV38_USB_OTG_OEP_1_9] = -1, + [DB8500_DMA_DEV39_USB_OTG_IEP_AND_OEP_8] = -1, + [DB8500_DMA_DEV16_USB_OTG_IEP_AND_OEP_7_15] = -1, + [DB8500_DMA_DEV17_USB_OTG_IEP_AND_OEP_6_14] = -1, + [DB8500_DMA_DEV18_USB_OTG_IEP_AND_OEP_5_13] = -1, + [DB8500_DMA_DEV19_USB_OTG_IEP_AND_OEP_4_12] = -1, + [DB8500_DMA_DEV36_USB_OTG_IEP_AND_OEP_3_11] = -1, + [DB8500_DMA_DEV37_USB_OTG_IEP_AND_OEP_2_10] = -1, + [DB8500_DMA_DEV38_USB_OTG_IEP_AND_OEP_1_9] = -1, /* PrimeCells - run-time configured */ - [DB8500_DMA_DEV0_SPI0_TX] = -1, - [DB8500_DMA_DEV1_SD_MMC0_TX] = -1, - [DB8500_DMA_DEV2_SD_MMC1_TX] = -1, - [DB8500_DMA_DEV3_SD_MMC2_TX] = -1, - [DB8500_DMA_DEV8_SSP0_TX] = -1, - [DB8500_DMA_DEV9_SSP1_TX] = -1, - [DB8500_DMA_DEV11_UART2_TX] = -1, - [DB8500_DMA_DEV12_UART1_TX] = -1, - [DB8500_DMA_DEV13_UART0_TX] = -1, - [DB8500_DMA_DEV28_SD_MM2_TX] = -1, - [DB8500_DMA_DEV29_SD_MM0_TX] = -1, - [DB8500_DMA_DEV32_SD_MM1_TX] = -1, - [DB8500_DMA_DEV33_SPI2_TX] = -1, - [DB8500_DMA_DEV35_SPI1_TX] = -1, - [DB8500_DMA_DEV40_SPI3_TX] = -1, - [DB8500_DMA_DEV41_SD_MM3_TX] = -1, - [DB8500_DMA_DEV42_SD_MM4_TX] = -1, - [DB8500_DMA_DEV43_SD_MM5_TX] = -1, - [DB8500_DMA_DEV14_MSP2_TX] = U8500_MSP2_BASE + MSP_TX_RX_REG_OFFSET, - [DB8500_DMA_DEV30_MSP1_TX] = U8500_MSP1_BASE + MSP_TX_RX_REG_OFFSET, - [DB8500_DMA_DEV31_MSP0_TX_SLIM0_CH0_TX] = U8500_MSP0_BASE + MSP_TX_RX_REG_OFFSET, - [DB8500_DMA_DEV48_CAC1_TX] = U8500_CRYP1_BASE + CRYP1_TX_REG_OFFSET, + [DB8500_DMA_DEV0_SPI0] = -1, + [DB8500_DMA_DEV1_SD_MMC0] = -1, + [DB8500_DMA_DEV2_SD_MMC1] = -1, + [DB8500_DMA_DEV3_SD_MMC2] = -1, + [DB8500_DMA_DEV8_SSP0] = -1, + [DB8500_DMA_DEV9_SSP1] = -1, + [DB8500_DMA_DEV11_UART2] = -1, + [DB8500_DMA_DEV12_UART1] = -1, + [DB8500_DMA_DEV13_UART0] = -1, + [DB8500_DMA_DEV28_SD_MM2] = -1, + [DB8500_DMA_DEV29_SD_MM0] = -1, + [DB8500_DMA_DEV32_SD_MM1] = -1, + [DB8500_DMA_DEV33_SPI2] = -1, + [DB8500_DMA_DEV35_SPI1] = -1, + [DB8500_DMA_DEV40_SPI3] = -1, + [DB8500_DMA_DEV41_SD_MM3] = -1, + [DB8500_DMA_DEV42_SD_MM4] = -1, + [DB8500_DMA_DEV43_SD_MM5] = -1, + [DB8500_DMA_DEV14_MSP2] = U8500_MSP2_BASE + MSP_TX_RX_REG_OFFSET, + [DB8500_DMA_DEV30_MSP1] = U8500_MSP1_BASE + MSP_TX_RX_REG_OFFSET, + [DB8500_DMA_DEV31_MSP0_SLIM0_CH0] = U8500_MSP0_BASE + MSP_TX_RX_REG_OFFSET, + [DB8500_DMA_DEV48_CAC1] = U8500_CRYP1_BASE + CRYP1_TX_REG_OFFSET, [DB8500_DMA_DEV50_HAC1_TX] = U8500_HASH1_BASE + HASH1_TX_REG_OFFSET, }; /* Mapping between source event lines and physical device address */ static const dma_addr_t dma40_rx_map[DB8500_DMA_NR_DEV] = { /* MUSB - these will be runtime-reconfigured */ - [DB8500_DMA_DEV39_USB_OTG_IEP_8] = -1, - [DB8500_DMA_DEV16_USB_OTG_IEP_7_15] = -1, - [DB8500_DMA_DEV17_USB_OTG_IEP_6_14] = -1, - [DB8500_DMA_DEV18_USB_OTG_IEP_5_13] = -1, - [DB8500_DMA_DEV19_USB_OTG_IEP_4_12] = -1, - [DB8500_DMA_DEV36_USB_OTG_IEP_3_11] = -1, - [DB8500_DMA_DEV37_USB_OTG_IEP_2_10] = -1, - [DB8500_DMA_DEV38_USB_OTG_IEP_1_9] = -1, + [DB8500_DMA_DEV39_USB_OTG_IEP_AND_OEP_8] = -1, + [DB8500_DMA_DEV16_USB_OTG_IEP_AND_OEP_7_15] = -1, + [DB8500_DMA_DEV17_USB_OTG_IEP_AND_OEP_6_14] = -1, + [DB8500_DMA_DEV18_USB_OTG_IEP_AND_OEP_5_13] = -1, + [DB8500_DMA_DEV19_USB_OTG_IEP_AND_OEP_4_12] = -1, + [DB8500_DMA_DEV36_USB_OTG_IEP_AND_OEP_3_11] = -1, + [DB8500_DMA_DEV37_USB_OTG_IEP_AND_OEP_2_10] = -1, + [DB8500_DMA_DEV38_USB_OTG_IEP_AND_OEP_1_9] = -1, /* PrimeCells */ - [DB8500_DMA_DEV0_SPI0_RX] = -1, - [DB8500_DMA_DEV1_SD_MMC0_RX] = -1, - [DB8500_DMA_DEV2_SD_MMC1_RX] = -1, - [DB8500_DMA_DEV3_SD_MMC2_RX] = -1, - [DB8500_DMA_DEV8_SSP0_RX] = -1, - [DB8500_DMA_DEV9_SSP1_RX] = -1, - [DB8500_DMA_DEV11_UART2_RX] = -1, - [DB8500_DMA_DEV12_UART1_RX] = -1, - [DB8500_DMA_DEV13_UART0_RX] = -1, - [DB8500_DMA_DEV28_SD_MM2_RX] = -1, - [DB8500_DMA_DEV29_SD_MM0_RX] = -1, - [DB8500_DMA_DEV32_SD_MM1_RX] = -1, - [DB8500_DMA_DEV33_SPI2_RX] = -1, - [DB8500_DMA_DEV35_SPI1_RX] = -1, - [DB8500_DMA_DEV40_SPI3_RX] = -1, - [DB8500_DMA_DEV41_SD_MM3_RX] = -1, - [DB8500_DMA_DEV42_SD_MM4_RX] = -1, - [DB8500_DMA_DEV43_SD_MM5_RX] = -1, - [DB8500_DMA_DEV14_MSP2_RX] = U8500_MSP2_BASE + MSP_TX_RX_REG_OFFSET, - [DB8500_DMA_DEV30_MSP3_RX] = U8500_MSP3_BASE + MSP_TX_RX_REG_OFFSET, - [DB8500_DMA_DEV31_MSP0_RX_SLIM0_CH0_RX] = U8500_MSP0_BASE + MSP_TX_RX_REG_OFFSET, - [DB8500_DMA_DEV48_CAC1_RX] = U8500_CRYP1_BASE + CRYP1_RX_REG_OFFSET, + [DB8500_DMA_DEV0_SPI0] = -1, + [DB8500_DMA_DEV1_SD_MMC0] = -1, + [DB8500_DMA_DEV2_SD_MMC1] = -1, + [DB8500_DMA_DEV3_SD_MMC2] = -1, + [DB8500_DMA_DEV8_SSP0] = -1, + [DB8500_DMA_DEV9_SSP1] = -1, + [DB8500_DMA_DEV11_UART2] = -1, + [DB8500_DMA_DEV12_UART1] = -1, + [DB8500_DMA_DEV13_UART0] = -1, + [DB8500_DMA_DEV28_SD_MM2] = -1, + [DB8500_DMA_DEV29_SD_MM0] = -1, + [DB8500_DMA_DEV32_SD_MM1] = -1, + [DB8500_DMA_DEV33_SPI2] = -1, + [DB8500_DMA_DEV35_SPI1] = -1, + [DB8500_DMA_DEV40_SPI3] = -1, + [DB8500_DMA_DEV41_SD_MM3] = -1, + [DB8500_DMA_DEV42_SD_MM4] = -1, + [DB8500_DMA_DEV43_SD_MM5] = -1, + [DB8500_DMA_DEV14_MSP2] = U8500_MSP2_BASE + MSP_TX_RX_REG_OFFSET, + [DB8500_DMA_DEV30_MSP3] = U8500_MSP3_BASE + MSP_TX_RX_REG_OFFSET, + [DB8500_DMA_DEV31_MSP0_SLIM0_CH0] = U8500_MSP0_BASE + MSP_TX_RX_REG_OFFSET, + [DB8500_DMA_DEV48_CAC1] = U8500_CRYP1_BASE + CRYP1_RX_REG_OFFSET, }; static struct stedma40_platform_data dma40_plat_data = { diff --git a/arch/arm/mach-ux500/ste-dma40-db8500.h b/arch/arm/mach-ux500/ste-dma40-db8500.h index a616419bea76..0296ae5b0fd9 100644 --- a/arch/arm/mach-ux500/ste-dma40-db8500.h +++ b/arch/arm/mach-ux500/ste-dma40-db8500.h @@ -12,133 +12,74 @@ #define DB8500_DMA_NR_DEV 64 -enum dma_src_dev_type { - DB8500_DMA_DEV0_SPI0_RX = 0, - DB8500_DMA_DEV1_SD_MMC0_RX = 1, - DB8500_DMA_DEV2_SD_MMC1_RX = 2, - DB8500_DMA_DEV3_SD_MMC2_RX = 3, - DB8500_DMA_DEV4_I2C1_RX = 4, - DB8500_DMA_DEV5_I2C3_RX = 5, - DB8500_DMA_DEV6_I2C2_RX = 6, - DB8500_DMA_DEV7_I2C4_RX = 7, /* Only on V1 and later */ - DB8500_DMA_DEV8_SSP0_RX = 8, - DB8500_DMA_DEV9_SSP1_RX = 9, - DB8500_DMA_DEV10_MCDE_RX = 10, - DB8500_DMA_DEV11_UART2_RX = 11, - DB8500_DMA_DEV12_UART1_RX = 12, - DB8500_DMA_DEV13_UART0_RX = 13, - DB8500_DMA_DEV14_MSP2_RX = 14, - DB8500_DMA_DEV15_I2C0_RX = 15, - DB8500_DMA_DEV16_USB_OTG_IEP_7_15 = 16, - DB8500_DMA_DEV17_USB_OTG_IEP_6_14 = 17, - DB8500_DMA_DEV18_USB_OTG_IEP_5_13 = 18, - DB8500_DMA_DEV19_USB_OTG_IEP_4_12 = 19, - DB8500_DMA_DEV20_SLIM0_CH0_RX_HSI_RX_CH0 = 20, - DB8500_DMA_DEV21_SLIM0_CH1_RX_HSI_RX_CH1 = 21, - DB8500_DMA_DEV22_SLIM0_CH2_RX_HSI_RX_CH2 = 22, - DB8500_DMA_DEV23_SLIM0_CH3_RX_HSI_RX_CH3 = 23, - DB8500_DMA_DEV24_SRC_SXA0_RX_TX = 24, - DB8500_DMA_DEV25_SRC_SXA1_RX_TX = 25, - DB8500_DMA_DEV26_SRC_SXA2_RX_TX = 26, - DB8500_DMA_DEV27_SRC_SXA3_RX_TX = 27, - DB8500_DMA_DEV28_SD_MM2_RX = 28, - DB8500_DMA_DEV29_SD_MM0_RX = 29, - DB8500_DMA_DEV30_MSP1_RX = 30, +/* + * Unless otherwise specified, all channels numbers are used for + * TX & RX, and can be used for either source or destination + * channels. + */ +enum dma_dev_type { + DB8500_DMA_DEV0_SPI0 = 0, + DB8500_DMA_DEV1_SD_MMC0 = 1, + DB8500_DMA_DEV2_SD_MMC1 = 2, + DB8500_DMA_DEV3_SD_MMC2 = 3, + DB8500_DMA_DEV4_I2C1 = 4, + DB8500_DMA_DEV5_I2C3 = 5, + DB8500_DMA_DEV6_I2C2 = 6, + DB8500_DMA_DEV7_I2C4 = 7, /* Only on V1 and later */ + DB8500_DMA_DEV8_SSP0 = 8, + DB8500_DMA_DEV9_SSP1 = 9, + DB8500_DMA_DEV10_MCDE_RX = 10, /* RX only */ + DB8500_DMA_DEV11_UART2 = 11, + DB8500_DMA_DEV12_UART1 = 12, + DB8500_DMA_DEV13_UART0 = 13, + DB8500_DMA_DEV14_MSP2 = 14, + DB8500_DMA_DEV15_I2C0 = 15, + DB8500_DMA_DEV16_USB_OTG_IEP_AND_OEP_7_15 = 16, + DB8500_DMA_DEV17_USB_OTG_IEP_AND_OEP_6_14 = 17, + DB8500_DMA_DEV18_USB_OTG_IEP_AND_OEP_5_13 = 18, + DB8500_DMA_DEV19_USB_OTG_IEP_AND_OEP_4_12 = 19, + DB8500_DMA_DEV20_SLIM0_CH0_HSI_CH0 = 20, + DB8500_DMA_DEV21_SLIM0_CH1_HSI_CH1 = 21, + DB8500_DMA_DEV22_SLIM0_CH2_HSI_CH2 = 22, + DB8500_DMA_DEV23_SLIM0_CH3_HSI_CH3 = 23, + DB8500_DMA_DEV24_SXA0 = 24, + DB8500_DMA_DEV25_SXA1 = 25, + DB8500_DMA_DEV26_SXA2 = 26, + DB8500_DMA_DEV27_SXA3 = 27, + DB8500_DMA_DEV28_SD_MM2 = 28, + DB8500_DMA_DEV29_SD_MM0 = 29, + DB8500_DMA_DEV30_MSP1 = 30, /* On DB8500v2, MSP3 RX replaces MSP1 RX */ - DB8500_DMA_DEV30_MSP3_RX = 30, - DB8500_DMA_DEV31_MSP0_RX_SLIM0_CH0_RX = 31, - DB8500_DMA_DEV32_SD_MM1_RX = 32, - DB8500_DMA_DEV33_SPI2_RX = 33, - DB8500_DMA_DEV34_I2C3_RX2 = 34, - DB8500_DMA_DEV35_SPI1_RX = 35, - DB8500_DMA_DEV36_USB_OTG_IEP_3_11 = 36, - DB8500_DMA_DEV37_USB_OTG_IEP_2_10 = 37, - DB8500_DMA_DEV38_USB_OTG_IEP_1_9 = 38, - DB8500_DMA_DEV39_USB_OTG_IEP_8 = 39, - DB8500_DMA_DEV40_SPI3_RX = 40, - DB8500_DMA_DEV41_SD_MM3_RX = 41, - DB8500_DMA_DEV42_SD_MM4_RX = 42, - DB8500_DMA_DEV43_SD_MM5_RX = 43, - DB8500_DMA_DEV44_SRC_SXA4_RX_TX = 44, - DB8500_DMA_DEV45_SRC_SXA5_RX_TX = 45, - DB8500_DMA_DEV46_SLIM0_CH8_RX_SRC_SXA6_RX_TX = 46, - DB8500_DMA_DEV47_SLIM0_CH9_RX_SRC_SXA7_RX_TX = 47, - DB8500_DMA_DEV48_CAC1_RX = 48, - /* 49, 50 and 51 are not used */ - DB8500_DMA_DEV52_SLIM0_CH4_RX_HSI_RX_CH4 = 52, - DB8500_DMA_DEV53_SLIM0_CH5_RX_HSI_RX_CH5 = 53, - DB8500_DMA_DEV54_SLIM0_CH6_RX_HSI_RX_CH6 = 54, - DB8500_DMA_DEV55_SLIM0_CH7_RX_HSI_RX_CH7 = 55, - /* 56, 57, 58, 59 and 60 are not used */ - DB8500_DMA_DEV61_CAC0_RX = 61, - /* 62 and 63 are not used */ -}; - -enum dma_dest_dev_type { - DB8500_DMA_DEV0_SPI0_TX = 0, - DB8500_DMA_DEV1_SD_MMC0_TX = 1, - DB8500_DMA_DEV2_SD_MMC1_TX = 2, - DB8500_DMA_DEV3_SD_MMC2_TX = 3, - DB8500_DMA_DEV4_I2C1_TX = 4, - DB8500_DMA_DEV5_I2C3_TX = 5, - DB8500_DMA_DEV6_I2C2_TX = 6, - DB8500_DMA_DEV7_I2C4_TX = 7, /* Only on V1 and later */ - DB8500_DMA_DEV8_SSP0_TX = 8, - DB8500_DMA_DEV9_SSP1_TX = 9, - /* 10 is not used*/ - DB8500_DMA_DEV11_UART2_TX = 11, - DB8500_DMA_DEV12_UART1_TX = 12, - DB8500_DMA_DEV13_UART0_TX = 13, - DB8500_DMA_DEV14_MSP2_TX = 14, - DB8500_DMA_DEV15_I2C0_TX = 15, - DB8500_DMA_DEV16_USB_OTG_OEP_7_15 = 16, - DB8500_DMA_DEV17_USB_OTG_OEP_6_14 = 17, - DB8500_DMA_DEV18_USB_OTG_OEP_5_13 = 18, - DB8500_DMA_DEV19_USB_OTG_OEP_4_12 = 19, - DB8500_DMA_DEV20_SLIM0_CH0_TX_HSI_TX_CH0 = 20, - DB8500_DMA_DEV21_SLIM0_CH1_TX_HSI_TX_CH1 = 21, - DB8500_DMA_DEV22_SLIM0_CH2_TX_HSI_TX_CH2 = 22, - DB8500_DMA_DEV23_SLIM0_CH3_TX_HSI_TX_CH3 = 23, - DB8500_DMA_DEV24_DST_SXA0_RX_TX = 24, - DB8500_DMA_DEV25_DST_SXA1_RX_TX = 25, - DB8500_DMA_DEV26_DST_SXA2_RX_TX = 26, - DB8500_DMA_DEV27_DST_SXA3_RX_TX = 27, - DB8500_DMA_DEV28_SD_MM2_TX = 28, - DB8500_DMA_DEV29_SD_MM0_TX = 29, - DB8500_DMA_DEV30_MSP1_TX = 30, - DB8500_DMA_DEV31_MSP0_TX_SLIM0_CH0_TX = 31, - DB8500_DMA_DEV32_SD_MM1_TX = 32, - DB8500_DMA_DEV33_SPI2_TX = 33, - DB8500_DMA_DEV34_I2C3_TX2 = 34, - DB8500_DMA_DEV35_SPI1_TX = 35, - DB8500_DMA_DEV36_USB_OTG_OEP_3_11 = 36, - DB8500_DMA_DEV37_USB_OTG_OEP_2_10 = 37, - DB8500_DMA_DEV38_USB_OTG_OEP_1_9 = 38, - DB8500_DMA_DEV39_USB_OTG_OEP_8 = 39, - DB8500_DMA_DEV40_SPI3_TX = 40, - DB8500_DMA_DEV41_SD_MM3_TX = 41, - DB8500_DMA_DEV42_SD_MM4_TX = 42, - DB8500_DMA_DEV43_SD_MM5_TX = 43, - DB8500_DMA_DEV44_DST_SXA4_RX_TX = 44, - DB8500_DMA_DEV45_DST_SXA5_RX_TX = 45, - DB8500_DMA_DEV46_SLIM0_CH8_TX_DST_SXA6_RX_TX = 46, - DB8500_DMA_DEV47_SLIM0_CH9_TX_DST_SXA7_RX_TX = 47, - DB8500_DMA_DEV48_CAC1_TX = 48, - DB8500_DMA_DEV49_CAC1_TX_HAC1_TX = 49, - DB8500_DMA_DEV50_HAC1_TX = 50, - DB8500_DMA_MEMCPY_TX_0 = 51, - DB8500_DMA_DEV52_SLIM1_CH4_TX_HSI_TX_CH4 = 52, - DB8500_DMA_DEV53_SLIM1_CH5_TX_HSI_TX_CH5 = 53, - DB8500_DMA_DEV54_SLIM1_CH6_TX_HSI_TX_CH6 = 54, - DB8500_DMA_DEV55_SLIM1_CH7_TX_HSI_TX_CH7 = 55, - DB8500_DMA_MEMCPY_TX_1 = 56, - DB8500_DMA_MEMCPY_TX_2 = 57, - DB8500_DMA_MEMCPY_TX_3 = 58, - DB8500_DMA_MEMCPY_TX_4 = 59, - DB8500_DMA_MEMCPY_TX_5 = 60, - DB8500_DMA_DEV61_CAC0_TX = 61, - DB8500_DMA_DEV62_CAC0_TX_HAC0_TX = 62, - DB8500_DMA_DEV63_HAC0_TX = 63, + DB8500_DMA_DEV30_MSP3 = 30, + DB8500_DMA_DEV31_MSP0_SLIM0_CH0 = 31, + DB8500_DMA_DEV32_SD_MM1 = 32, + DB8500_DMA_DEV33_SPI2 = 33, + DB8500_DMA_DEV34_I2C3_RX2_TX2 = 34, + DB8500_DMA_DEV35_SPI1 = 35, + DB8500_DMA_DEV36_USB_OTG_IEP_AND_OEP_3_11 = 36, + DB8500_DMA_DEV37_USB_OTG_IEP_AND_OEP_2_10 = 37, + DB8500_DMA_DEV38_USB_OTG_IEP_AND_OEP_1_9 = 38, + DB8500_DMA_DEV39_USB_OTG_IEP_AND_OEP_8 = 39, + DB8500_DMA_DEV40_SPI3 = 40, + DB8500_DMA_DEV41_SD_MM3 = 41, + DB8500_DMA_DEV42_SD_MM4 = 42, + DB8500_DMA_DEV43_SD_MM5 = 43, + DB8500_DMA_DEV44_SXA4 = 44, + DB8500_DMA_DEV45_SXA5 = 45, + DB8500_DMA_DEV46_SLIM0_CH8_SRC_SXA6 = 46, + DB8500_DMA_DEV47_SLIM0_CH9_SRC_SXA7 = 47, + DB8500_DMA_DEV48_CAC1 = 48, + DB8500_DMA_DEV49_CAC1_TX_HAC1_TX = 49, /* TX only */ + DB8500_DMA_DEV50_HAC1_TX = 50, /* TX only */ + DB8500_DMA_MEMCPY_TX_0 = 51, /* TX only */ + DB8500_DMA_DEV52_SLIM0_CH4_HSI_CH4 = 52, + DB8500_DMA_DEV53_SLIM0_CH5_HSI_CH5 = 53, + DB8500_DMA_DEV54_SLIM0_CH6_HSI_CH6 = 54, + DB8500_DMA_DEV55_SLIM0_CH7_HSI_CH7 = 55, + /* 56 -> 60 are channels reserved for memcpy only */ + DB8500_DMA_DEV61_CAC0 = 61, + DB8500_DMA_DEV62_CAC0_TX_HAC0_TX = 62, /* TX only */ + DB8500_DMA_DEV63_HAC0_TX = 63, /* TX only */ }; #endif diff --git a/arch/arm/mach-ux500/usb.c b/arch/arm/mach-ux500/usb.c index 2dfc72f7cd8a..45af3031dfef 100644 --- a/arch/arm/mach-ux500/usb.c +++ b/arch/arm/mach-ux500/usb.c @@ -15,7 +15,6 @@ #define MUSB_DMA40_RX_CH { \ .mode = STEDMA40_MODE_LOGICAL, \ .dir = STEDMA40_PERIPH_TO_MEM, \ - .dst_dev_type = STEDMA40_DEV_DST_MEMORY, \ .src_info.data_width = STEDMA40_WORD_WIDTH, \ .dst_info.data_width = STEDMA40_WORD_WIDTH, \ .src_info.psize = STEDMA40_PSIZE_LOG_16, \ @@ -25,7 +24,6 @@ #define MUSB_DMA40_TX_CH { \ .mode = STEDMA40_MODE_LOGICAL, \ .dir = STEDMA40_MEM_TO_PERIPH, \ - .src_dev_type = STEDMA40_DEV_SRC_MEMORY, \ .src_info.data_width = STEDMA40_WORD_WIDTH, \ .dst_info.data_width = STEDMA40_WORD_WIDTH, \ .src_info.psize = STEDMA40_PSIZE_LOG_16, \ @@ -125,20 +123,20 @@ struct platform_device ux500_musb_device = { .resource = usb_resources, }; -static inline void ux500_usb_dma_update_rx_ch_config(int *src_dev_type) +static inline void ux500_usb_dma_update_rx_ch_config(int *dev_type) { u32 idx; for (idx = 0; idx < UX500_MUSB_DMA_NUM_RX_CHANNELS; idx++) - musb_dma_rx_ch[idx].src_dev_type = src_dev_type[idx]; + musb_dma_rx_ch[idx].dev_type = dev_type[idx]; } -static inline void ux500_usb_dma_update_tx_ch_config(int *dst_dev_type) +static inline void ux500_usb_dma_update_tx_ch_config(int *dev_type) { u32 idx; for (idx = 0; idx < UX500_MUSB_DMA_NUM_TX_CHANNELS; idx++) - musb_dma_tx_ch[idx].dst_dev_type = dst_dev_type[idx]; + musb_dma_tx_ch[idx].dev_type = dev_type[idx]; } void ux500_add_usb(struct device *parent, resource_size_t base, int irq, diff --git a/drivers/dma/ste_dma40.c b/drivers/dma/ste_dma40.c index d481cb8521d9..63495f6a36f9 100644 --- a/drivers/dma/ste_dma40.c +++ b/drivers/dma/ste_dma40.c @@ -1302,21 +1302,17 @@ static void __d40_config_set_event(struct d40_chan *d40c, static void d40_config_set_event(struct d40_chan *d40c, enum d40_events event_type) { + u32 event = D40_TYPE_TO_EVENT(d40c->dma_cfg.dev_type); + /* Enable event line connected to device (or memcpy) */ if ((d40c->dma_cfg.dir == STEDMA40_PERIPH_TO_MEM) || - (d40c->dma_cfg.dir == STEDMA40_PERIPH_TO_PERIPH)) { - u32 event = D40_TYPE_TO_EVENT(d40c->dma_cfg.src_dev_type); - + (d40c->dma_cfg.dir == STEDMA40_PERIPH_TO_PERIPH)) __d40_config_set_event(d40c, event_type, event, D40_CHAN_REG_SSLNK); - } - - if (d40c->dma_cfg.dir != STEDMA40_PERIPH_TO_MEM) { - u32 event = D40_TYPE_TO_EVENT(d40c->dma_cfg.dst_dev_type); + if (d40c->dma_cfg.dir != STEDMA40_PERIPH_TO_MEM) __d40_config_set_event(d40c, event_type, event, D40_CHAN_REG_SDLNK); - } } static u32 d40_chan_has_events(struct d40_chan *d40c) @@ -1758,8 +1754,6 @@ static int d40_validate_conf(struct d40_chan *d40c, struct stedma40_chan_cfg *conf) { int res = 0; - u32 dst_event_group = D40_TYPE_TO_GROUP(conf->dst_dev_type); - u32 src_event_group = D40_TYPE_TO_GROUP(conf->src_dev_type); bool is_log = conf->mode == STEDMA40_MODE_LOGICAL; if (!conf->dir) { @@ -1767,44 +1761,26 @@ static int d40_validate_conf(struct d40_chan *d40c, res = -EINVAL; } - if (conf->dst_dev_type != STEDMA40_DEV_DST_MEMORY && - d40c->base->plat_data->dev_tx[conf->dst_dev_type] == 0 && - d40c->runtime_addr == 0) { - - chan_err(d40c, "Invalid TX channel address (%d)\n", - conf->dst_dev_type); - res = -EINVAL; - } - - if (conf->src_dev_type != STEDMA40_DEV_SRC_MEMORY && - d40c->base->plat_data->dev_rx[conf->src_dev_type] == 0 && - d40c->runtime_addr == 0) { - chan_err(d40c, "Invalid RX channel address (%d)\n", - conf->src_dev_type); + if ((is_log && conf->dev_type > d40c->base->num_log_chans) || + (!is_log && conf->dev_type > d40c->base->num_phy_chans) || + (conf->dev_type < 0)) { + chan_err(d40c, "Invalid device type (%d)\n", conf->dev_type); res = -EINVAL; } if (conf->dir == STEDMA40_MEM_TO_PERIPH && - conf->dst_dev_type == STEDMA40_DEV_DST_MEMORY) { - chan_err(d40c, "Invalid dst\n"); + d40c->base->plat_data->dev_tx[conf->dev_type] == 0 && + d40c->runtime_addr == 0) { + chan_err(d40c, "Invalid TX channel address (%d)\n", + conf->dev_type); res = -EINVAL; } if (conf->dir == STEDMA40_PERIPH_TO_MEM && - conf->src_dev_type == STEDMA40_DEV_SRC_MEMORY) { - chan_err(d40c, "Invalid src\n"); - res = -EINVAL; - } - - if (conf->src_dev_type == STEDMA40_DEV_SRC_MEMORY && - conf->dst_dev_type == STEDMA40_DEV_DST_MEMORY && is_log) { - chan_err(d40c, "No event line\n"); - res = -EINVAL; - } - - if (conf->dir == STEDMA40_PERIPH_TO_PERIPH && - (src_event_group != dst_event_group)) { - chan_err(d40c, "Invalid event group\n"); + d40c->base->plat_data->dev_rx[conf->dev_type] == 0 && + d40c->runtime_addr == 0) { + chan_err(d40c, "Invalid RX channel address (%d)\n", + conf->dev_type); res = -EINVAL; } @@ -1925,7 +1901,7 @@ out: static int d40_allocate_channel(struct d40_chan *d40c, bool *first_phy_user) { - int dev_type; + int dev_type = d40c->dma_cfg.dev_type; int event_group; int event_line; struct d40_phy_res *phys; @@ -1940,13 +1916,11 @@ static int d40_allocate_channel(struct d40_chan *d40c, bool *first_phy_user) num_phy_chans = d40c->base->num_phy_chans; if (d40c->dma_cfg.dir == STEDMA40_PERIPH_TO_MEM) { - dev_type = d40c->dma_cfg.src_dev_type; log_num = 2 * dev_type; is_src = true; } else if (d40c->dma_cfg.dir == STEDMA40_MEM_TO_PERIPH || d40c->dma_cfg.dir == STEDMA40_MEM_TO_MEM) { /* dst event lines are used for logical memcpy */ - dev_type = d40c->dma_cfg.dst_dev_type; log_num = 2 * dev_type + 1; is_src = false; } else @@ -2058,8 +2032,7 @@ static int d40_config_memcpy(struct d40_chan *d40c) if (dma_has_cap(DMA_MEMCPY, cap) && !dma_has_cap(DMA_SLAVE, cap)) { d40c->dma_cfg = dma40_memcpy_conf_log; - d40c->dma_cfg.src_dev_type = STEDMA40_DEV_SRC_MEMORY; - d40c->dma_cfg.dst_dev_type = dma40_memcpy_channels[d40c->chan.chan_id]; + d40c->dma_cfg.dev_type = dma40_memcpy_channels[d40c->chan.chan_id]; } else if (dma_has_cap(DMA_MEMCPY, cap) && dma_has_cap(DMA_SLAVE, cap)) { @@ -2076,7 +2049,7 @@ static int d40_free_dma(struct d40_chan *d40c) { int res = 0; - u32 event; + u32 event = D40_TYPE_TO_EVENT(d40c->dma_cfg.dev_type); struct d40_phy_res *phy = d40c->phy_chan; bool is_src; @@ -2095,13 +2068,11 @@ static int d40_free_dma(struct d40_chan *d40c) } if (d40c->dma_cfg.dir == STEDMA40_MEM_TO_PERIPH || - d40c->dma_cfg.dir == STEDMA40_MEM_TO_MEM) { - event = D40_TYPE_TO_EVENT(d40c->dma_cfg.dst_dev_type); + d40c->dma_cfg.dir == STEDMA40_MEM_TO_MEM) is_src = false; - } else if (d40c->dma_cfg.dir == STEDMA40_PERIPH_TO_MEM) { - event = D40_TYPE_TO_EVENT(d40c->dma_cfg.src_dev_type); + else if (d40c->dma_cfg.dir == STEDMA40_PERIPH_TO_MEM) is_src = true; - } else { + else { chan_err(d40c, "Unknown direction\n"); return -EINVAL; } @@ -2142,7 +2113,7 @@ static bool d40_is_paused(struct d40_chan *d40c) unsigned long flags; void __iomem *active_reg; u32 status; - u32 event; + u32 event = D40_TYPE_TO_EVENT(d40c->dma_cfg.dev_type); spin_lock_irqsave(&d40c->lock, flags); @@ -2163,10 +2134,8 @@ static bool d40_is_paused(struct d40_chan *d40c) if (d40c->dma_cfg.dir == STEDMA40_MEM_TO_PERIPH || d40c->dma_cfg.dir == STEDMA40_MEM_TO_MEM) { - event = D40_TYPE_TO_EVENT(d40c->dma_cfg.dst_dev_type); status = readl(chanbase + D40_CHAN_REG_SDLNK); } else if (d40c->dma_cfg.dir == STEDMA40_PERIPH_TO_MEM) { - event = D40_TYPE_TO_EVENT(d40c->dma_cfg.src_dev_type); status = readl(chanbase + D40_CHAN_REG_SSLNK); } else { chan_err(d40c, "Unknown direction\n"); @@ -2308,9 +2277,9 @@ d40_get_dev_addr(struct d40_chan *chan, enum dma_transfer_direction direction) return chan->runtime_addr; if (direction == DMA_DEV_TO_MEM) - addr = plat->dev_rx[cfg->src_dev_type]; + addr = plat->dev_rx[cfg->dev_type]; else if (direction == DMA_MEM_TO_DEV) - addr = plat->dev_tx[cfg->dst_dev_type]; + addr = plat->dev_tx[cfg->dev_type]; return addr; } @@ -2441,11 +2410,11 @@ static void d40_set_prio_realtime(struct d40_chan *d40c) if ((d40c->dma_cfg.dir == STEDMA40_PERIPH_TO_MEM) || (d40c->dma_cfg.dir == STEDMA40_PERIPH_TO_PERIPH)) - __d40_set_prio_rt(d40c, d40c->dma_cfg.src_dev_type, true); + __d40_set_prio_rt(d40c, d40c->dma_cfg.dev_type, true); if ((d40c->dma_cfg.dir == STEDMA40_MEM_TO_PERIPH) || (d40c->dma_cfg.dir == STEDMA40_PERIPH_TO_PERIPH)) - __d40_set_prio_rt(d40c, d40c->dma_cfg.dst_dev_type, false); + __d40_set_prio_rt(d40c, d40c->dma_cfg.dev_type, false); } /* DMA ENGINE functions */ @@ -2489,10 +2458,10 @@ static int d40_alloc_chan_resources(struct dma_chan *chan) if (d40c->dma_cfg.dir == STEDMA40_PERIPH_TO_MEM) d40c->lcpa = d40c->base->lcpa_base + - d40c->dma_cfg.src_dev_type * D40_LCPA_CHAN_SIZE; + d40c->dma_cfg.dev_type * D40_LCPA_CHAN_SIZE; else d40c->lcpa = d40c->base->lcpa_base + - d40c->dma_cfg.dst_dev_type * + d40c->dma_cfg.dev_type * D40_LCPA_CHAN_SIZE + D40_LCPA_CHAN_DST_DELTA; } @@ -2755,7 +2724,7 @@ static int d40_set_runtime_config(struct dma_chan *chan, if (config->direction == DMA_DEV_TO_MEM) { dma_addr_t dev_addr_rx = - d40c->base->plat_data->dev_rx[cfg->src_dev_type]; + d40c->base->plat_data->dev_rx[cfg->dev_type]; config_addr = config->src_addr; if (dev_addr_rx) @@ -2778,7 +2747,7 @@ static int d40_set_runtime_config(struct dma_chan *chan, } else if (config->direction == DMA_MEM_TO_DEV) { dma_addr_t dev_addr_tx = - d40c->base->plat_data->dev_tx[cfg->dst_dev_type]; + d40c->base->plat_data->dev_tx[cfg->dev_type]; config_addr = config->dst_addr; if (dev_addr_tx) diff --git a/drivers/dma/ste_dma40_ll.c b/drivers/dma/ste_dma40_ll.c index 7180e0d41722..5eb6c10beae1 100644 --- a/drivers/dma/ste_dma40_ll.c +++ b/drivers/dma/ste_dma40_ll.c @@ -63,7 +63,7 @@ void d40_phy_cfg(struct stedma40_chan_cfg *cfg, (cfg->dir == STEDMA40_PERIPH_TO_PERIPH)) { /* Set master port to 1 */ src |= 1 << D40_SREG_CFG_MST_POS; - src |= D40_TYPE_TO_EVENT(cfg->src_dev_type); + src |= D40_TYPE_TO_EVENT(cfg->dev_type); if (cfg->src_info.flow_ctrl == STEDMA40_NO_FLOW_CTRL) src |= 1 << D40_SREG_CFG_PHY_TM_POS; @@ -74,7 +74,7 @@ void d40_phy_cfg(struct stedma40_chan_cfg *cfg, (cfg->dir == STEDMA40_PERIPH_TO_PERIPH)) { /* Set master port to 1 */ dst |= 1 << D40_SREG_CFG_MST_POS; - dst |= D40_TYPE_TO_EVENT(cfg->dst_dev_type); + dst |= D40_TYPE_TO_EVENT(cfg->dev_type); if (cfg->dst_info.flow_ctrl == STEDMA40_NO_FLOW_CTRL) dst |= 1 << D40_SREG_CFG_PHY_TM_POS; diff --git a/include/linux/platform_data/dma-ste-dma40.h b/include/linux/platform_data/dma-ste-dma40.h index 869c571c8c08..9e42a67d0cd5 100644 --- a/include/linux/platform_data/dma-ste-dma40.h +++ b/include/linux/platform_data/dma-ste-dma40.h @@ -109,8 +109,7 @@ struct stedma40_half_channel_info { * version 3+, i.e DB8500v2+ * @mode: channel mode: physical, logical, or operation * @mode_opt: options for the chosen channel mode - * @src_dev_type: Src device type - * @dst_dev_type: Dst device type + * @dev_type: src/dst device type (driver uses dir to figure out which) * @src_info: Parameters for dst half channel * @dst_info: Parameters for dst half channel * @use_fixed_channel: if true, use physical channel specified by phy_channel @@ -126,8 +125,7 @@ struct stedma40_chan_cfg { bool realtime; enum stedma40_mode mode; enum stedma40_mode_opt mode_opt; - int src_dev_type; - int dst_dev_type; + int dev_type; struct stedma40_half_channel_info src_info; struct stedma40_half_channel_info dst_info; -- cgit v1.2.3 From df7c9bbc246e6f173a2e718976aad7c163ed81ba Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Fri, 3 May 2013 15:31:57 +0100 Subject: ARM: ux500: Strip out duplicate USB DMA configuration For the moment at least, the TX and RX channels for DB8500 USB are identical, so this patch generalises them into a single structure and passes it twice. Once as the TX and again for the RX configuration. We're keeping the infrastructure the same i.e. passing the TX and RX separately in case they start to differ on latter incarnations of the platform. Acked-by: Arnd Bergmann Signed-off-by: Lee Jones Signed-off-by: Linus Walleij --- arch/arm/mach-ux500/cpu-db8500.c | 17 +++-------------- 1 file changed, 3 insertions(+), 14 deletions(-) diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c index 67d68e05f3a7..5f0b2ed55df6 100644 --- a/arch/arm/mach-ux500/cpu-db8500.c +++ b/arch/arm/mach-ux500/cpu-db8500.c @@ -162,18 +162,7 @@ static void __init db8500_add_gpios(struct device *parent) dbx500_add_pinctrl(parent, "pinctrl-db8500", U8500_PRCMU_BASE); } -static int usb_db8500_rx_dma_cfg[] = { - DB8500_DMA_DEV38_USB_OTG_IEP_AND_OEP_1_9, - DB8500_DMA_DEV37_USB_OTG_IEP_AND_OEP_2_10, - DB8500_DMA_DEV36_USB_OTG_IEP_AND_OEP_3_11, - DB8500_DMA_DEV19_USB_OTG_IEP_AND_OEP_4_12, - DB8500_DMA_DEV18_USB_OTG_IEP_AND_OEP_5_13, - DB8500_DMA_DEV17_USB_OTG_IEP_AND_OEP_6_14, - DB8500_DMA_DEV16_USB_OTG_IEP_AND_OEP_7_15, - DB8500_DMA_DEV39_USB_OTG_IEP_AND_OEP_8 -}; - -static int usb_db8500_tx_dma_cfg[] = { +static int usb_db8500_dma_cfg[] = { DB8500_DMA_DEV38_USB_OTG_IEP_AND_OEP_1_9, DB8500_DMA_DEV37_USB_OTG_IEP_AND_OEP_2_10, DB8500_DMA_DEV36_USB_OTG_IEP_AND_OEP_3_11, @@ -215,7 +204,7 @@ struct device * __init u8500_init_devices(struct ab8500_platform_data *ab8500) db8500_add_rtc(parent); db8500_add_gpios(parent); - db8500_add_usb(parent, usb_db8500_rx_dma_cfg, usb_db8500_tx_dma_cfg); + db8500_add_usb(parent, usb_db8500_dma_cfg, usb_db8500_dma_cfg); for (i = 0; i < ARRAY_SIZE(platform_devs); i++) platform_devs[i]->dev.parent = parent; @@ -234,7 +223,7 @@ static struct device * __init u8500_of_init_devices(void) { struct device *parent = db8500_soc_device_init(); - db8500_add_usb(parent, usb_db8500_rx_dma_cfg, usb_db8500_tx_dma_cfg); + db8500_add_usb(parent, usb_db8500_dma_cfg, usb_db8500_dma_cfg); u8500_dma40_device.dev.parent = parent; -- cgit v1.2.3 From 84b3da1498943840005d7d5652caf4fe6fd333e6 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Fri, 3 May 2013 15:31:58 +0100 Subject: dmaengine: ste_dma40: Remove home-brew MAX() macro The current implementation of the DMA40's local MAX() macro evaluates its arguments more times than is necessary and it not type checked. This patch strips replaces it with a new, more efficient constant. Cc: Dan Williams Cc: Per Forlin Cc: Rabin Vincent Acked-by: Vinod Koul Reported-by: Harvey Harrison Signed-off-by: Lee Jones Signed-off-by: Linus Walleij --- drivers/dma/ste_dma40.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/dma/ste_dma40.c b/drivers/dma/ste_dma40.c index 63495f6a36f9..367ef15a3cd8 100644 --- a/drivers/dma/ste_dma40.c +++ b/drivers/dma/ste_dma40.c @@ -53,8 +53,6 @@ #define D40_ALLOC_PHY (1 << 30) #define D40_ALLOC_LOG_FREE 0 -#define MAX(a, b) (((a) < (b)) ? (b) : (a)) - /* Reserved event lines for memcpy only. */ #define DB8500_DMA_MEMCPY_EV_0 51 #define DB8500_DMA_MEMCPY_EV_1 56 @@ -216,6 +214,9 @@ static u32 d40_backup_regs_chan[] = { D40_CHAN_REG_SDLNK, }; +#define BACKUP_REGS_SZ_MAX ((BACKUP_REGS_SZ_V4A > BACKUP_REGS_SZ_V4B) ? \ + BACKUP_REGS_SZ_V4A : BACKUP_REGS_SZ_V4B) + /** * struct d40_interrupt_lookup - lookup table for interrupt handler * @@ -579,7 +580,7 @@ struct d40_base { resource_size_t lcpa_size; struct kmem_cache *desc_slab; u32 reg_val_backup[BACKUP_REGS_SZ]; - u32 reg_val_backup_v4[MAX(BACKUP_REGS_SZ_V4A, BACKUP_REGS_SZ_V4B)]; + u32 reg_val_backup_v4[BACKUP_REGS_SZ_MAX]; u32 *reg_val_backup_chan; u16 gcc_pwr_off_mask; bool initialized; -- cgit v1.2.3 From 7636d1dcdbc299a3ffa405d99b15261693e16268 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Fri, 3 May 2013 15:31:59 +0100 Subject: ARM: ux500: Remove unused 'data_width' attributes from SDI DMA configs DMA configuration data is now allocated in the MMCI driver, so these are just ignored. Signed-off-by: Lee Jones Signed-off-by: Linus Walleij --- arch/arm/mach-ux500/board-mop500-sdi.c | 16 ---------------- 1 file changed, 16 deletions(-) diff --git a/arch/arm/mach-ux500/board-mop500-sdi.c b/arch/arm/mach-ux500/board-mop500-sdi.c index 4e30b6dc9ac5..29be714b8a73 100644 --- a/arch/arm/mach-ux500/board-mop500-sdi.c +++ b/arch/arm/mach-ux500/board-mop500-sdi.c @@ -36,16 +36,12 @@ struct stedma40_chan_cfg mop500_sdi0_dma_cfg_rx = { .mode = STEDMA40_MODE_LOGICAL, .dir = STEDMA40_PERIPH_TO_MEM, .dev_type = DB8500_DMA_DEV29_SD_MM0, - .src_info.data_width = STEDMA40_WORD_WIDTH, - .dst_info.data_width = STEDMA40_WORD_WIDTH, }; static struct stedma40_chan_cfg mop500_sdi0_dma_cfg_tx = { .mode = STEDMA40_MODE_LOGICAL, .dir = STEDMA40_MEM_TO_PERIPH, .dev_type = DB8500_DMA_DEV29_SD_MM0, - .src_info.data_width = STEDMA40_WORD_WIDTH, - .dst_info.data_width = STEDMA40_WORD_WIDTH, }; #endif @@ -87,16 +83,12 @@ static struct stedma40_chan_cfg sdi1_dma_cfg_rx = { .mode = STEDMA40_MODE_LOGICAL, .dir = STEDMA40_PERIPH_TO_MEM, .dev_type = DB8500_DMA_DEV32_SD_MM1, - .src_info.data_width = STEDMA40_WORD_WIDTH, - .dst_info.data_width = STEDMA40_WORD_WIDTH, }; static struct stedma40_chan_cfg sdi1_dma_cfg_tx = { .mode = STEDMA40_MODE_LOGICAL, .dir = STEDMA40_MEM_TO_PERIPH, .dev_type = DB8500_DMA_DEV32_SD_MM1, - .src_info.data_width = STEDMA40_WORD_WIDTH, - .dst_info.data_width = STEDMA40_WORD_WIDTH, }; #endif @@ -122,16 +114,12 @@ struct stedma40_chan_cfg mop500_sdi2_dma_cfg_rx = { .mode = STEDMA40_MODE_LOGICAL, .dir = STEDMA40_PERIPH_TO_MEM, .dev_type = DB8500_DMA_DEV28_SD_MM2, - .src_info.data_width = STEDMA40_WORD_WIDTH, - .dst_info.data_width = STEDMA40_WORD_WIDTH, }; static struct stedma40_chan_cfg mop500_sdi2_dma_cfg_tx = { .mode = STEDMA40_MODE_LOGICAL, .dir = STEDMA40_MEM_TO_PERIPH, .dev_type = DB8500_DMA_DEV28_SD_MM2, - .src_info.data_width = STEDMA40_WORD_WIDTH, - .dst_info.data_width = STEDMA40_WORD_WIDTH, }; #endif @@ -158,16 +146,12 @@ struct stedma40_chan_cfg mop500_sdi4_dma_cfg_rx = { .mode = STEDMA40_MODE_LOGICAL, .dir = STEDMA40_PERIPH_TO_MEM, .dev_type = DB8500_DMA_DEV42_SD_MM4, - .src_info.data_width = STEDMA40_WORD_WIDTH, - .dst_info.data_width = STEDMA40_WORD_WIDTH, }; static struct stedma40_chan_cfg mop500_sdi4_dma_cfg_tx = { .mode = STEDMA40_MODE_LOGICAL, .dir = STEDMA40_MEM_TO_PERIPH, .dev_type = DB8500_DMA_DEV42_SD_MM4, - .src_info.data_width = STEDMA40_WORD_WIDTH, - .dst_info.data_width = STEDMA40_WORD_WIDTH, }; #endif -- cgit v1.2.3 From de63589efa7950a74949073699b26703b833d162 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Fri, 3 May 2013 15:32:00 +0100 Subject: ARM: ux500: Remove unused 'data_width' attributes from SSP DMA configs DMA configuration data is now allocated in the SSP driver, so these are just ignored. Signed-off-by: Lee Jones Signed-off-by: Linus Walleij --- arch/arm/mach-ux500/board-mop500.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c index 871e61517fb2..f48e88dbda15 100644 --- a/arch/arm/mach-ux500/board-mop500.c +++ b/arch/arm/mach-ux500/board-mop500.c @@ -469,16 +469,12 @@ static struct stedma40_chan_cfg ssp0_dma_cfg_rx = { .mode = STEDMA40_MODE_LOGICAL, .dir = STEDMA40_PERIPH_TO_MEM, .dev_type = DB8500_DMA_DEV8_SSP0, - .src_info.data_width = STEDMA40_BYTE_WIDTH, - .dst_info.data_width = STEDMA40_BYTE_WIDTH, }; static struct stedma40_chan_cfg ssp0_dma_cfg_tx = { .mode = STEDMA40_MODE_LOGICAL, .dir = STEDMA40_MEM_TO_PERIPH, .dev_type = DB8500_DMA_DEV8_SSP0, - .src_info.data_width = STEDMA40_BYTE_WIDTH, - .dst_info.data_width = STEDMA40_BYTE_WIDTH, }; #endif -- cgit v1.2.3 From c86519c1ab025969e551441bb35bb8ec28f8cff0 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Fri, 3 May 2013 15:32:01 +0100 Subject: ARM: ux500: Remove unused 'data_width' attributes from UART DMA configs DMA configuration data is now allocated in the UART driver, so these are just ignored. Signed-off-by: Lee Jones Signed-off-by: Linus Walleij --- arch/arm/mach-ux500/board-mop500.c | 12 ------------ 1 file changed, 12 deletions(-) diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c index f48e88dbda15..e3dafdd713c9 100644 --- a/arch/arm/mach-ux500/board-mop500.c +++ b/arch/arm/mach-ux500/board-mop500.c @@ -504,48 +504,36 @@ static struct stedma40_chan_cfg uart0_dma_cfg_rx = { .mode = STEDMA40_MODE_LOGICAL, .dir = STEDMA40_PERIPH_TO_MEM, .dev_type = DB8500_DMA_DEV13_UART0, - .src_info.data_width = STEDMA40_BYTE_WIDTH, - .dst_info.data_width = STEDMA40_BYTE_WIDTH, }; static struct stedma40_chan_cfg uart0_dma_cfg_tx = { .mode = STEDMA40_MODE_LOGICAL, .dir = STEDMA40_MEM_TO_PERIPH, .dev_type = DB8500_DMA_DEV13_UART0, - .src_info.data_width = STEDMA40_BYTE_WIDTH, - .dst_info.data_width = STEDMA40_BYTE_WIDTH, }; static struct stedma40_chan_cfg uart1_dma_cfg_rx = { .mode = STEDMA40_MODE_LOGICAL, .dir = STEDMA40_PERIPH_TO_MEM, .dev_type = DB8500_DMA_DEV12_UART1, - .src_info.data_width = STEDMA40_BYTE_WIDTH, - .dst_info.data_width = STEDMA40_BYTE_WIDTH, }; static struct stedma40_chan_cfg uart1_dma_cfg_tx = { .mode = STEDMA40_MODE_LOGICAL, .dir = STEDMA40_MEM_TO_PERIPH, .dev_type = DB8500_DMA_DEV12_UART1, - .src_info.data_width = STEDMA40_BYTE_WIDTH, - .dst_info.data_width = STEDMA40_BYTE_WIDTH, }; static struct stedma40_chan_cfg uart2_dma_cfg_rx = { .mode = STEDMA40_MODE_LOGICAL, .dir = STEDMA40_PERIPH_TO_MEM, .dev_type = DB8500_DMA_DEV11_UART2, - .src_info.data_width = STEDMA40_BYTE_WIDTH, - .dst_info.data_width = STEDMA40_BYTE_WIDTH, }; static struct stedma40_chan_cfg uart2_dma_cfg_tx = { .mode = STEDMA40_MODE_LOGICAL, .dir = STEDMA40_MEM_TO_PERIPH, .dev_type = DB8500_DMA_DEV11_UART2, - .src_info.data_width = STEDMA40_BYTE_WIDTH, - .dst_info.data_width = STEDMA40_BYTE_WIDTH, }; #endif -- cgit v1.2.3 From 4bd04e2ed415754a38118399328bc2c494f68632 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Fri, 3 May 2013 15:32:02 +0100 Subject: ARM: ux500: Remove superfluous 'psize' attribute from Audio platform data 'psize' is used to calculate the maximum DMA burst size. However it is only taken into consideration when editing the DMA channel's configuration. The Audio DMA platform data is only used to allocate a channel, not configure it. That will be done at a later date within the MSP driver. We're also removing comments which are no longer required, as 'data_width' is no longer set in any device's platform data period. Tested-by: Fabio Baltieri Signed-off-by: Lee Jones Signed-off-by: Linus Walleij --- arch/arm/mach-ux500/board-mop500-audio.c | 38 -------------------------------- 1 file changed, 38 deletions(-) diff --git a/arch/arm/mach-ux500/board-mop500-audio.c b/arch/arm/mach-ux500/board-mop500-audio.c index 5a968fa8b90c..ec872622340f 100644 --- a/arch/arm/mach-ux500/board-mop500-audio.c +++ b/arch/arm/mach-ux500/board-mop500-audio.c @@ -22,25 +22,13 @@ static struct stedma40_chan_cfg msp0_dma_rx = { .high_priority = true, .dir = STEDMA40_PERIPH_TO_MEM, - .dev_type = DB8500_DMA_DEV31_MSP0_SLIM0_CH0, - - .src_info.psize = STEDMA40_PSIZE_LOG_4, - .dst_info.psize = STEDMA40_PSIZE_LOG_4, - - /* data_width is set during configuration */ }; static struct stedma40_chan_cfg msp0_dma_tx = { .high_priority = true, .dir = STEDMA40_MEM_TO_PERIPH, - .dev_type = DB8500_DMA_DEV31_MSP0_SLIM0_CH0, - - .src_info.psize = STEDMA40_PSIZE_LOG_4, - .dst_info.psize = STEDMA40_PSIZE_LOG_4, - - /* data_width is set during configuration */ }; struct msp_i2s_platform_data msp0_platform_data = { @@ -52,25 +40,13 @@ struct msp_i2s_platform_data msp0_platform_data = { static struct stedma40_chan_cfg msp1_dma_rx = { .high_priority = true, .dir = STEDMA40_PERIPH_TO_MEM, - .dev_type = DB8500_DMA_DEV30_MSP3, - - .src_info.psize = STEDMA40_PSIZE_LOG_4, - .dst_info.psize = STEDMA40_PSIZE_LOG_4, - - /* data_width is set during configuration */ }; static struct stedma40_chan_cfg msp1_dma_tx = { .high_priority = true, .dir = STEDMA40_MEM_TO_PERIPH, - .dev_type = DB8500_DMA_DEV30_MSP1, - - .src_info.psize = STEDMA40_PSIZE_LOG_4, - .dst_info.psize = STEDMA40_PSIZE_LOG_4, - - /* data_width is set during configuration */ }; struct msp_i2s_platform_data msp1_platform_data = { @@ -82,29 +58,15 @@ struct msp_i2s_platform_data msp1_platform_data = { static struct stedma40_chan_cfg msp2_dma_rx = { .high_priority = true, .dir = STEDMA40_PERIPH_TO_MEM, - .dev_type = DB8500_DMA_DEV14_MSP2, - - /* MSP2 DMA doesn't work with PSIZE == 4 on DB8500v2 */ - .src_info.psize = STEDMA40_PSIZE_LOG_1, - .dst_info.psize = STEDMA40_PSIZE_LOG_1, - - /* data_width is set during configuration */ }; static struct stedma40_chan_cfg msp2_dma_tx = { .high_priority = true, .dir = STEDMA40_MEM_TO_PERIPH, - .dev_type = DB8500_DMA_DEV14_MSP2, - - .src_info.psize = STEDMA40_PSIZE_LOG_4, - .dst_info.psize = STEDMA40_PSIZE_LOG_4, - .use_fixed_channel = true, .phy_channel = 1, - - /* data_width is set during configuration */ }; static struct platform_device *db8500_add_msp_i2s(struct device *parent, -- cgit v1.2.3 From db72da92103e3023e6a4fdfe65183b21bfe5d883 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Fri, 3 May 2013 15:32:03 +0100 Subject: dmaengine: ste_dma40: Calculate number of logical channels from physical ones This change will cost ~25KB of memory, but it's worth the trade-off, as it removes a great deal of overhead. It means that instead of only allocating memory for the logical channels in use, it does so for all available ones, which is 32 per physical channel. However, this now means we can remove some platform data and we don't have to worry about adding vendor specific variables to Device Tree. Acked-by: Vinod Koul Signed-off-by: Lee Jones Signed-off-by: Linus Walleij --- arch/arm/mach-ux500/devices-db8500.c | 1 - drivers/dma/ste_dma40.c | 16 ++++++---------- include/linux/platform_data/dma-ste-dma40.h | 2 -- 3 files changed, 6 insertions(+), 13 deletions(-) diff --git a/arch/arm/mach-ux500/devices-db8500.c b/arch/arm/mach-ux500/devices-db8500.c index 7989c564e47a..130f3d9917e7 100644 --- a/arch/arm/mach-ux500/devices-db8500.c +++ b/arch/arm/mach-ux500/devices-db8500.c @@ -121,7 +121,6 @@ static const dma_addr_t dma40_rx_map[DB8500_DMA_NR_DEV] = { }; static struct stedma40_platform_data dma40_plat_data = { - .dev_len = DB8500_DMA_NR_DEV, .dev_rx = dma40_rx_map, .dev_tx = dma40_tx_map, .disabled_channels = {-1}, diff --git a/drivers/dma/ste_dma40.c b/drivers/dma/ste_dma40.c index 367ef15a3cd8..f25c9ccf28e8 100644 --- a/drivers/dma/ste_dma40.c +++ b/drivers/dma/ste_dma40.c @@ -45,6 +45,9 @@ #define D40_LCLA_LINK_PER_EVENT_GRP 128 #define D40_LCLA_END D40_LCLA_LINK_PER_EVENT_GRP +/* Max number of logical channels per physical channel */ +#define D40_MAX_LOG_CHAN_PER_PHY 32 + /* Attempts before giving up to trying to get pages that are aligned */ #define MAX_LCLA_ALLOC_ATTEMPTS 256 @@ -3210,6 +3213,8 @@ static struct d40_base * __init d40_hw_detect_init(struct platform_device *pdev) else num_phy_chans = 4 * (readl(virtbase + D40_DREG_ICFG) & 0x7) + 4; + num_log_chans = num_phy_chans * D40_MAX_LOG_CHAN_PER_PHY; + dev_info(&pdev->dev, "hardware revision: %d @ 0x%x with %d physical channels\n", rev, res->start, num_phy_chans); @@ -3219,15 +3224,6 @@ static struct d40_base * __init d40_hw_detect_init(struct platform_device *pdev) goto failure; } - /* Count the number of logical channels in use */ - for (i = 0; i < plat_data->dev_len; i++) - if (plat_data->dev_rx[i] != 0) - num_log_chans++; - - for (i = 0; i < plat_data->dev_len; i++) - if (plat_data->dev_tx[i] != 0) - num_log_chans++; - base = kzalloc(ALIGN(sizeof(struct d40_base), 4) + (num_phy_chans + num_log_chans + ARRAY_SIZE(dma40_memcpy_channels)) * sizeof(struct d40_chan), GFP_KERNEL); @@ -3295,7 +3291,7 @@ static struct d40_base * __init d40_hw_detect_init(struct platform_device *pdev) * The max number of logical channels are event lines for all * src devices and dst devices */ - base->lookup_log_chans = kzalloc(plat_data->dev_len * 2 * + base->lookup_log_chans = kzalloc(num_log_chans * sizeof(struct d40_chan *), GFP_KERNEL); if (!base->lookup_log_chans) diff --git a/include/linux/platform_data/dma-ste-dma40.h b/include/linux/platform_data/dma-ste-dma40.h index 9e42a67d0cd5..c54af61c9e48 100644 --- a/include/linux/platform_data/dma-ste-dma40.h +++ b/include/linux/platform_data/dma-ste-dma40.h @@ -136,7 +136,6 @@ struct stedma40_chan_cfg { /** * struct stedma40_platform_data - Configuration struct for the dma device. * - * @dev_len: length of dev_tx and dev_rx * @dev_tx: mapping between destination event line and io address * @dev_rx: mapping between source event line and io address * @disabled_channels: A vector, ending with -1, that marks physical channels @@ -153,7 +152,6 @@ struct stedma40_chan_cfg { * for 'multiple of 4' channels, like 8. */ struct stedma40_platform_data { - u32 dev_len; const dma_addr_t *dev_tx; const dma_addr_t *dev_rx; int disabled_channels[STEDMA40_MAX_PHYS]; -- cgit v1.2.3 From 8a59fed39577d7313921a59dba8cc1711ae90da5 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Fri, 3 May 2013 15:32:04 +0100 Subject: dmaengine: ste_dma40: Remove 'always true' checking Before allocating memory for logical channels, the current driver checks to see if there are any. Well as the dma40_memcpy_channels[] array is always populated, the check is always true. Best to remove the check. Cc: Dan Williams Cc: Per Forlin Cc: Rabin Vincent Acked-by: Vinod Koul Acked-by: Arnd Bergmann Signed-off-by: Lee Jones Signed-off-by: Linus Walleij --- drivers/dma/ste_dma40.c | 16 +++++----------- 1 file changed, 5 insertions(+), 11 deletions(-) diff --git a/drivers/dma/ste_dma40.c b/drivers/dma/ste_dma40.c index f25c9ccf28e8..7ccb8e2d59be 100644 --- a/drivers/dma/ste_dma40.c +++ b/drivers/dma/ste_dma40.c @@ -3286,17 +3286,11 @@ static struct d40_base * __init d40_hw_detect_init(struct platform_device *pdev) if (!base->lookup_phy_chans) goto failure; - if (num_log_chans + ARRAY_SIZE(dma40_memcpy_channels)) { - /* - * The max number of logical channels are event lines for all - * src devices and dst devices - */ - base->lookup_log_chans = kzalloc(num_log_chans * - sizeof(struct d40_chan *), - GFP_KERNEL); - if (!base->lookup_log_chans) - goto failure; - } + base->lookup_log_chans = kzalloc(num_log_chans * + sizeof(struct d40_chan *), + GFP_KERNEL); + if (!base->lookup_log_chans) + goto failure; base->reg_val_backup_chan = kmalloc(base->num_phy_chans * sizeof(d40_backup_regs_chan), -- cgit v1.2.3 From 8b2fe9b6b310a6e5d68de648d6f0697227581d66 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Fri, 3 May 2013 15:32:08 +0100 Subject: dmaengine: ste_dma40: Move rev error-check up to revision acquisition At the moment we fetch the hardware revision, then do some stuff, then check whether the revision is correct and return in error if it's not. Well we may as well check it as soon as we know what it is, so let's move the check right up underneath where we acquire the version. Acked-by: Vinod Koul Signed-off-by: Lee Jones Signed-off-by: Linus Walleij --- drivers/dma/ste_dma40.c | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-) diff --git a/drivers/dma/ste_dma40.c b/drivers/dma/ste_dma40.c index 7ccb8e2d59be..fb79db3313d3 100644 --- a/drivers/dma/ste_dma40.c +++ b/drivers/dma/ste_dma40.c @@ -3204,6 +3204,10 @@ static struct d40_base * __init d40_hw_detect_init(struct platform_device *pdev) * DB8540v1 has revision 4 */ rev = AMBA_REV_BITS(pid); + if (rev < 2) { + d40_err(&pdev->dev, "hardware revision: %d is not supported", rev); + goto failure; + } plat_data = pdev->dev.platform_data; @@ -3218,12 +3222,6 @@ static struct d40_base * __init d40_hw_detect_init(struct platform_device *pdev) dev_info(&pdev->dev, "hardware revision: %d @ 0x%x with %d physical channels\n", rev, res->start, num_phy_chans); - if (rev < 2) { - d40_err(&pdev->dev, "hardware revision: %d is not supported", - rev); - goto failure; - } - base = kzalloc(ALIGN(sizeof(struct d40_base), 4) + (num_phy_chans + num_log_chans + ARRAY_SIZE(dma40_memcpy_channels)) * sizeof(struct d40_chan), GFP_KERNEL); -- cgit v1.2.3 From b2abb249de5ffca71ade8b79c9969e046fc03722 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Fri, 3 May 2013 15:32:09 +0100 Subject: dmaengine: ste_dma40: Also report the number of logical channels Now we know the total of physical and logical channels, we may as well report them within the information log. Before: dma40 dma40.0: hardware revision: 3 @ 0x801c0000 with 8 physical channels After: and 256 logical channels Cc: Dan Williams Cc: Per Forlin Cc: Rabin Vincent Acked-by: Vinod Koul Signed-off-by: Lee Jones Signed-off-by: Linus Walleij --- drivers/dma/ste_dma40.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/dma/ste_dma40.c b/drivers/dma/ste_dma40.c index fb79db3313d3..665541df5798 100644 --- a/drivers/dma/ste_dma40.c +++ b/drivers/dma/ste_dma40.c @@ -3219,8 +3219,9 @@ static struct d40_base * __init d40_hw_detect_init(struct platform_device *pdev) num_log_chans = num_phy_chans * D40_MAX_LOG_CHAN_PER_PHY; - dev_info(&pdev->dev, "hardware revision: %d @ 0x%x with %d physical channels\n", - rev, res->start, num_phy_chans); + dev_info(&pdev->dev, + "hardware rev: %d @ 0x%x with %d physical and %d logical channels\n", + rev, res->start, num_phy_chans, num_log_chans); base = kzalloc(ALIGN(sizeof(struct d40_base), 4) + (num_phy_chans + num_log_chans + ARRAY_SIZE(dma40_memcpy_channels)) * -- cgit v1.2.3 From bb75d93b903afcd0904c83850835857fd9f8ef2d Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Fri, 3 May 2013 15:32:10 +0100 Subject: dmaengine: ste_dma40: Allocate plat_data on declaration It's the way that most other drivers do it. Very trivial clean-up which reduces line count and simplifies code. Acked-by: Vinod Koul Signed-off-by: Lee Jones Signed-off-by: Linus Walleij --- drivers/dma/ste_dma40.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/drivers/dma/ste_dma40.c b/drivers/dma/ste_dma40.c index 665541df5798..925cdbe08c2e 100644 --- a/drivers/dma/ste_dma40.c +++ b/drivers/dma/ste_dma40.c @@ -3138,7 +3138,7 @@ static int __init d40_phy_res_init(struct d40_base *base) static struct d40_base * __init d40_hw_detect_init(struct platform_device *pdev) { - struct stedma40_platform_data *plat_data; + struct stedma40_platform_data *plat_data = pdev->dev.platform_data; struct clk *clk = NULL; void __iomem *virtbase = NULL; struct resource *res = NULL; @@ -3209,8 +3209,6 @@ static struct d40_base * __init d40_hw_detect_init(struct platform_device *pdev) goto failure; } - plat_data = pdev->dev.platform_data; - /* The number of physical channels on this HW */ if (plat_data->num_of_phy_chans) num_phy_chans = plat_data->num_of_phy_chans; -- cgit v1.2.3 From 1814a1703ce2d6d4b88b5f62a52b137afebad990 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Fri, 3 May 2013 15:32:11 +0100 Subject: dmaengine: ste_dma40: Allow driver to be probe()able when DT is enabled When booting using Device Tree, devices aren't registered in the normal way. Instead, they need to be provided with a compatible string which is held in an OF Match Table for comparison during start-up. Here we provide the compatible string and prepare the driver to not receive a platform data pointer. Acked-by: Vinod Koul Acked-by: Arnd Bergmann Signed-off-by: Lee Jones [Fixed up whitespace error] Signed-off-by: Linus Walleij --- drivers/dma/ste_dma40.c | 46 ++++++++++++++++++++++++++++++++++++++++++++-- 1 file changed, 44 insertions(+), 2 deletions(-) diff --git a/drivers/dma/ste_dma40.c b/drivers/dma/ste_dma40.c index 925cdbe08c2e..495e8869b9b0 100644 --- a/drivers/dma/ste_dma40.c +++ b/drivers/dma/ste_dma40.c @@ -17,6 +17,7 @@ #include #include #include +#include #include #include #include @@ -3471,17 +3472,52 @@ failure: return ret; } +static int __init d40_of_probe(struct platform_device *pdev, + struct device_node *np) +{ + struct stedma40_platform_data *pdata; + + /* + * FIXME: Fill in this routine as more support is added. + * First platform enabled (u8500) doens't need any extra + * properties to run, so this is fairly sparce currently. + */ + + pdata = devm_kzalloc(&pdev->dev, + sizeof(struct stedma40_platform_data), + GFP_KERNEL); + if (!pdata) + return -ENOMEM; + + pdev->dev.platform_data = pdata; + + return 0; +} + static int __init d40_probe(struct platform_device *pdev) { + struct stedma40_platform_data *plat_data = pdev->dev.platform_data; + struct device_node *np = pdev->dev.of_node; int err; int ret = -ENOENT; - struct d40_base *base; + struct d40_base *base = NULL; struct resource *res = NULL; int num_reserved_chans; u32 val; - base = d40_hw_detect_init(pdev); + if (!plat_data) { + if (np) { + if(d40_of_probe(pdev, np)) { + ret = -ENOMEM; + goto failure; + } + } else { + d40_err(&pdev->dev, "No pdata or Device Tree provided\n"); + goto failure; + } + } + base = d40_hw_detect_init(pdev); if (!base) goto failure; @@ -3655,11 +3691,17 @@ failure: return ret; } +static const struct of_device_id d40_match[] = { + { .compatible = "stericsson,dma40", }, + {} +}; + static struct platform_driver d40_driver = { .driver = { .owner = THIS_MODULE, .name = D40_NAME, .pm = DMA40_PM_OPS, + .of_match_table = d40_match, }, }; -- cgit v1.2.3 From fa332de5c6b3891485798adfe3252125457e5377 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Fri, 3 May 2013 15:32:12 +0100 Subject: dmaengine: ste_dma40: Supply full Device Tree parsing support Using the new DMA DT bindings and API, we can register the DMA40 driver as Device Tree capable. Now, when a client attempts to allocate a channel using the DMA DT bindings via its own node, we are able to parse the request and allocate a channel in the correct manner. Cc: Dan Williams Cc: Per Forlin Cc: Rabin Vincent Cc: Rob Herring Cc: devicetree-discuss@lists.ozlabs.org Acked-by: Vinod Koul Reviewed-by: Arnd Bergmann Signed-off-by: Lee Jones Signed-off-by: Linus Walleij --- .../devicetree/bindings/dma/ste-dma40.txt | 62 ++++++++++++++++++++++ drivers/dma/ste_dma40.c | 52 ++++++++++++++++++ 2 files changed, 114 insertions(+) create mode 100644 Documentation/devicetree/bindings/dma/ste-dma40.txt diff --git a/Documentation/devicetree/bindings/dma/ste-dma40.txt b/Documentation/devicetree/bindings/dma/ste-dma40.txt new file mode 100644 index 000000000000..2679a873522d --- /dev/null +++ b/Documentation/devicetree/bindings/dma/ste-dma40.txt @@ -0,0 +1,62 @@ +* DMA40 DMA Controller + +Required properties: +- compatible: "stericsson,dma40" +- reg: Address range of the DMAC registers +- reg-names: Names of the above areas to use during resource look-up +- interrupt: Should contain the DMAC interrupt number +- #dma-cells: must be <3> + +Optional properties: +- dma-channels: Number of channels supported by hardware - if not present + the driver will attempt to obtain the information from H/W + +Example: + + dma: dma-controller@801C0000 { + compatible = "stericsson,db8500-dma40", "stericsson,dma40"; + reg = <0x801C0000 0x1000 0x40010000 0x800>; + reg-names = "base", "lcpa"; + interrupt-parent = <&intc>; + interrupts = <0 25 0x4>; + + #dma-cells = <2>; + dma-channels = <8>; + }; + +Clients +Required properties: +- dmas: Comma separated list of dma channel requests +- dma-names: Names of the aforementioned requested channels + +Each dmas request consists of 4 cells: + 1. A phandle pointing to the DMA controller + 2. Device Type + 3. The DMA request line number (only when 'use fixed channel' is set) + 4. A 32bit mask specifying; mode, direction and endianess [NB: This list will grow] + 0x00000001: Mode: + Logical channel when unset + Physical channel when set + 0x00000002: Direction: + Memory to Device when unset + Device to Memory when set + 0x00000004: Endianess: + Little endian when unset + Big endian when set + 0x00000008: Use fixed channel: + Use automatic channel selection when unset + Use DMA request line number when set + +Example: + + uart@80120000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x80120000 0x1000>; + interrupts = <0 11 0x4>; + + dmas = <&dma 13 0 0x2>, /* Logical - DevToMem */ + <&dma 13 0 0x0>; /* Logical - MemToDev */ + dma-names = "rx", "rx"; + + status = "disabled"; + }; diff --git a/drivers/dma/ste_dma40.c b/drivers/dma/ste_dma40.c index 495e8869b9b0..5e9f6d670891 100644 --- a/drivers/dma/ste_dma40.c +++ b/drivers/dma/ste_dma40.c @@ -18,6 +18,7 @@ #include #include #include +#include #include #include #include @@ -2422,6 +2423,50 @@ static void d40_set_prio_realtime(struct d40_chan *d40c) __d40_set_prio_rt(d40c, d40c->dma_cfg.dev_type, false); } +#define D40_DT_FLAGS_MODE(flags) ((flags >> 0) & 0x1) +#define D40_DT_FLAGS_DIR(flags) ((flags >> 1) & 0x1) +#define D40_DT_FLAGS_BIG_ENDIAN(flags) ((flags >> 2) & 0x1) +#define D40_DT_FLAGS_FIXED_CHAN(flags) ((flags >> 3) & 0x1) + +static struct dma_chan *d40_xlate(struct of_phandle_args *dma_spec, + struct of_dma *ofdma) +{ + struct stedma40_chan_cfg cfg; + dma_cap_mask_t cap; + u32 flags; + + memset(&cfg, 0, sizeof(struct stedma40_chan_cfg)); + + dma_cap_zero(cap); + dma_cap_set(DMA_SLAVE, cap); + + cfg.dev_type = dma_spec->args[0]; + flags = dma_spec->args[2]; + + switch (D40_DT_FLAGS_MODE(flags)) { + case 0: cfg.mode = STEDMA40_MODE_LOGICAL; break; + case 1: cfg.mode = STEDMA40_MODE_PHYSICAL; break; + } + + switch (D40_DT_FLAGS_DIR(flags)) { + case 0: + cfg.dir = STEDMA40_MEM_TO_PERIPH; + cfg.dst_info.big_endian = D40_DT_FLAGS_BIG_ENDIAN(flags); + break; + case 1: + cfg.dir = STEDMA40_PERIPH_TO_MEM; + cfg.src_info.big_endian = D40_DT_FLAGS_BIG_ENDIAN(flags); + break; + } + + if (D40_DT_FLAGS_FIXED_CHAN(flags)) { + cfg.phy_channel = dma_spec->args[1]; + cfg.use_fixed_channel = true; + } + + return dma_request_channel(cap, stedma40_filter, &cfg); +} + /* DMA ENGINE functions */ static int d40_alloc_chan_resources(struct dma_chan *chan) { @@ -3638,6 +3683,13 @@ static int __init d40_probe(struct platform_device *pdev) d40_hw_init(base); + if (np) { + err = of_dma_controller_register(np, d40_xlate, NULL); + if (err && err != -ENODEV) + dev_err(&pdev->dev, + "could not register of_dma_controller\n"); + } + dev_info(base->dev, "initialized\n"); return 0; -- cgit v1.2.3 From 252f27b0f21a875601ced115893f34f37e37ecbf Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Fri, 3 May 2013 15:32:13 +0100 Subject: ARM: ux500: Pass remnant platform data though to DMA40 driver Ironically, in order to remove lots of the auxdata assignments, we have to add just one more. A lot of them require DMA information to be passed into clients for DMA channel allocation, but we now have this capability in Device Tree. However, the DMA40 driver still relies on a reverse table look-up to obtain DMA addresses. Until all of the clients are converted, over to the new API, we're stuck with this. Also, now the DMA40 has been DT:ed, there's no requirement to register it using traditional methods, so let's remove it. Acked-by: Arnd Bergmann Signed-off-by: Lee Jones Signed-off-by: Linus Walleij --- arch/arm/mach-ux500/board-mop500.h | 1 + arch/arm/mach-ux500/cpu-db8500.c | 13 +++---------- arch/arm/mach-ux500/devices-db8500.c | 2 +- 3 files changed, 5 insertions(+), 11 deletions(-) diff --git a/arch/arm/mach-ux500/board-mop500.h b/arch/arm/mach-ux500/board-mop500.h index 49514b825034..6f0bfcb08907 100644 --- a/arch/arm/mach-ux500/board-mop500.h +++ b/arch/arm/mach-ux500/board-mop500.h @@ -93,6 +93,7 @@ extern struct amba_pl011_data uart0_plat; extern struct amba_pl011_data uart1_plat; extern struct amba_pl011_data uart2_plat; extern struct pl022_ssp_controller ssp0_plat; +extern struct stedma40_platform_data dma40_plat_data; extern void mop500_sdi_init(struct device *parent); extern void snowball_sdi_init(struct device *parent); diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c index 5f0b2ed55df6..648fa0cd0123 100644 --- a/arch/arm/mach-ux500/cpu-db8500.c +++ b/arch/arm/mach-ux500/cpu-db8500.c @@ -225,16 +225,6 @@ static struct device * __init u8500_of_init_devices(void) db8500_add_usb(parent, usb_db8500_dma_cfg, usb_db8500_dma_cfg); - u8500_dma40_device.dev.parent = parent; - - /* - * Devices to be DT:ed: - * u8500_dma40_device = todo - * db8500_pmu_device = done - * db8500_prcmu_device = done - */ - platform_device_register(&u8500_dma40_device); - return parent; } @@ -280,6 +270,9 @@ static struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = { "ux500-msp-i2s.2", &msp2_platform_data), OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80125000, "ux500-msp-i2s.3", &msp3_platform_data), + /* Requires clock name bindings and channel address lookup table. */ + OF_DEV_AUXDATA("stericsson,db8500-dma40", 0x801C0000, + "dma40.0", &dma40_plat_data), {}, }; diff --git a/arch/arm/mach-ux500/devices-db8500.c b/arch/arm/mach-ux500/devices-db8500.c index 130f3d9917e7..bed25a39e68b 100644 --- a/arch/arm/mach-ux500/devices-db8500.c +++ b/arch/arm/mach-ux500/devices-db8500.c @@ -120,7 +120,7 @@ static const dma_addr_t dma40_rx_map[DB8500_DMA_NR_DEV] = { [DB8500_DMA_DEV48_CAC1] = U8500_CRYP1_BASE + CRYP1_RX_REG_OFFSET, }; -static struct stedma40_platform_data dma40_plat_data = { +struct stedma40_platform_data dma40_plat_data = { .dev_rx = dma40_rx_map, .dev_tx = dma40_tx_map, .disabled_channels = {-1}, -- cgit v1.2.3 From 9778256b9810d2c758a7537a43825b7d81b5765f Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Wed, 15 May 2013 10:51:24 +0100 Subject: dmaengine: ste_dma40: Separate Logical Global Interrupt Mask (GIM) unmasking During the initial setup of a logical channel, it is necessary to unmask the GIM in order to receive generated terminal count and error interrupts. We're separating out this required code so it will be possible to move the remaining code in d40_phy_cfg(), which is mostly runtime configuration into the runtime_config() routine. Cc: Dan Williams Cc: Per Forlin Cc: Rabin Vincent Acked-by: Vinod Koul Acked-by: Arnd Bergmann Signed-off-by: Lee Jones Signed-off-by: Linus Walleij --- drivers/dma/ste_dma40.c | 4 ++++ drivers/dma/ste_dma40_ll.c | 5 ----- 2 files changed, 4 insertions(+), 5 deletions(-) diff --git a/drivers/dma/ste_dma40.c b/drivers/dma/ste_dma40.c index 5e9f6d670891..759293e4a1cc 100644 --- a/drivers/dma/ste_dma40.c +++ b/drivers/dma/ste_dma40.c @@ -2513,6 +2513,10 @@ static int d40_alloc_chan_resources(struct dma_chan *chan) d40c->lcpa = d40c->base->lcpa_base + d40c->dma_cfg.dev_type * D40_LCPA_CHAN_SIZE + D40_LCPA_CHAN_DST_DELTA; + + /* Unmask the Global Interrupt Mask. */ + d40c->src_def_cfg |= BIT(D40_SREG_CFG_LOG_GIM_POS); + d40c->dst_def_cfg |= BIT(D40_SREG_CFG_LOG_GIM_POS); } dev_dbg(chan2dev(d40c), "allocated %s channel (phy %d%s)\n", diff --git a/drivers/dma/ste_dma40_ll.c b/drivers/dma/ste_dma40_ll.c index 5eb6c10beae1..435a223c891f 100644 --- a/drivers/dma/ste_dma40_ll.c +++ b/drivers/dma/ste_dma40_ll.c @@ -107,11 +107,6 @@ void d40_phy_cfg(struct stedma40_chan_cfg *cfg, src |= 1 << D40_SREG_CFG_PRI_POS; dst |= 1 << D40_SREG_CFG_PRI_POS; } - - } else { - /* Logical channel */ - dst |= 1 << D40_SREG_CFG_LOG_GIM_POS; - src |= 1 << D40_SREG_CFG_LOG_GIM_POS; } if (cfg->src_info.big_endian) -- cgit v1.2.3 From 57e65ad77fef1b026f5bdf1cd417bb6346b24fdf Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Wed, 15 May 2013 10:51:25 +0100 Subject: dmaengine: ste_dma40: Remove unnecessary call to d40_phy_cfg() The majority of configuration done in d40_phy_config() pertains to physical channels. Move the call over to runtime config which has different code paths for physical and logical channels already, and make it an exclusive physical channel config function as the name implies, and drop the is_log argument. Since we moved the call to runtime_config() it only gets called for device transfers, so encode the small snippet of configuration pertaining to memcpy channels into the d40_config_memcpy() function. Acked-by: Vinod Koul Acked-by: Arnd Bergmann Signed-off-by: Lee Jones [rewrote the commit message] Signed-off-by: Linus Walleij --- drivers/dma/ste_dma40.c | 14 ++++--- drivers/dma/ste_dma40_ll.c | 101 +++++++++++++++++++++------------------------ drivers/dma/ste_dma40_ll.h | 3 +- 3 files changed, 58 insertions(+), 60 deletions(-) diff --git a/drivers/dma/ste_dma40.c b/drivers/dma/ste_dma40.c index 759293e4a1cc..b7fe46bd6a8e 100644 --- a/drivers/dma/ste_dma40.c +++ b/drivers/dma/ste_dma40.c @@ -2043,6 +2043,14 @@ static int d40_config_memcpy(struct d40_chan *d40c) } else if (dma_has_cap(DMA_MEMCPY, cap) && dma_has_cap(DMA_SLAVE, cap)) { d40c->dma_cfg = dma40_memcpy_conf_phy; + + /* Generate interrrupt at end of transfer or relink. */ + d40c->dst_def_cfg |= BIT(D40_SREG_CFG_TIM_POS); + + /* Generate interrupt on error. */ + d40c->src_def_cfg |= BIT(D40_SREG_CFG_EIM_POS); + d40c->dst_def_cfg |= BIT(D40_SREG_CFG_EIM_POS); + } else { chan_err(d40c, "No memcpy\n"); return -EINVAL; @@ -2496,9 +2504,6 @@ static int d40_alloc_chan_resources(struct dma_chan *chan) } pm_runtime_get_sync(d40c->base->dev); - /* Fill in basic CFG register values */ - d40_phy_cfg(&d40c->dma_cfg, &d40c->src_def_cfg, - &d40c->dst_def_cfg, chan_is_logical(d40c)); d40_set_prio_realtime(d40c); @@ -2862,8 +2867,7 @@ static int d40_set_runtime_config(struct dma_chan *chan, if (chan_is_logical(d40c)) d40_log_cfg(cfg, &d40c->log_def.lcsp1, &d40c->log_def.lcsp3); else - d40_phy_cfg(cfg, &d40c->src_def_cfg, - &d40c->dst_def_cfg, false); + d40_phy_cfg(cfg, &d40c->src_def_cfg, &d40c->dst_def_cfg); /* These settings will take precedence later */ d40c->runtime_addr = config_addr; diff --git a/drivers/dma/ste_dma40_ll.c b/drivers/dma/ste_dma40_ll.c index 435a223c891f..ab5a2a706f7a 100644 --- a/drivers/dma/ste_dma40_ll.c +++ b/drivers/dma/ste_dma40_ll.c @@ -50,63 +50,58 @@ void d40_log_cfg(struct stedma40_chan_cfg *cfg, } -/* Sets up SRC and DST CFG register for both logical and physical channels */ -void d40_phy_cfg(struct stedma40_chan_cfg *cfg, - u32 *src_cfg, u32 *dst_cfg, bool is_log) +void d40_phy_cfg(struct stedma40_chan_cfg *cfg, u32 *src_cfg, u32 *dst_cfg) { u32 src = 0; u32 dst = 0; - if (!is_log) { - /* Physical channel */ - if ((cfg->dir == STEDMA40_PERIPH_TO_MEM) || - (cfg->dir == STEDMA40_PERIPH_TO_PERIPH)) { - /* Set master port to 1 */ - src |= 1 << D40_SREG_CFG_MST_POS; - src |= D40_TYPE_TO_EVENT(cfg->dev_type); - - if (cfg->src_info.flow_ctrl == STEDMA40_NO_FLOW_CTRL) - src |= 1 << D40_SREG_CFG_PHY_TM_POS; - else - src |= 3 << D40_SREG_CFG_PHY_TM_POS; - } - if ((cfg->dir == STEDMA40_MEM_TO_PERIPH) || - (cfg->dir == STEDMA40_PERIPH_TO_PERIPH)) { - /* Set master port to 1 */ - dst |= 1 << D40_SREG_CFG_MST_POS; - dst |= D40_TYPE_TO_EVENT(cfg->dev_type); - - if (cfg->dst_info.flow_ctrl == STEDMA40_NO_FLOW_CTRL) - dst |= 1 << D40_SREG_CFG_PHY_TM_POS; - else - dst |= 3 << D40_SREG_CFG_PHY_TM_POS; - } - /* Interrupt on end of transfer for destination */ - dst |= 1 << D40_SREG_CFG_TIM_POS; - - /* Generate interrupt on error */ - src |= 1 << D40_SREG_CFG_EIM_POS; - dst |= 1 << D40_SREG_CFG_EIM_POS; - - /* PSIZE */ - if (cfg->src_info.psize != STEDMA40_PSIZE_PHY_1) { - src |= 1 << D40_SREG_CFG_PHY_PEN_POS; - src |= cfg->src_info.psize << D40_SREG_CFG_PSIZE_POS; - } - if (cfg->dst_info.psize != STEDMA40_PSIZE_PHY_1) { - dst |= 1 << D40_SREG_CFG_PHY_PEN_POS; - dst |= cfg->dst_info.psize << D40_SREG_CFG_PSIZE_POS; - } - - /* Element size */ - src |= cfg->src_info.data_width << D40_SREG_CFG_ESIZE_POS; - dst |= cfg->dst_info.data_width << D40_SREG_CFG_ESIZE_POS; - - /* Set the priority bit to high for the physical channel */ - if (cfg->high_priority) { - src |= 1 << D40_SREG_CFG_PRI_POS; - dst |= 1 << D40_SREG_CFG_PRI_POS; - } + if ((cfg->dir == STEDMA40_PERIPH_TO_MEM) || + (cfg->dir == STEDMA40_PERIPH_TO_PERIPH)) { + /* Set master port to 1 */ + src |= 1 << D40_SREG_CFG_MST_POS; + src |= D40_TYPE_TO_EVENT(cfg->dev_type); + + if (cfg->src_info.flow_ctrl == STEDMA40_NO_FLOW_CTRL) + src |= 1 << D40_SREG_CFG_PHY_TM_POS; + else + src |= 3 << D40_SREG_CFG_PHY_TM_POS; + } + if ((cfg->dir == STEDMA40_MEM_TO_PERIPH) || + (cfg->dir == STEDMA40_PERIPH_TO_PERIPH)) { + /* Set master port to 1 */ + dst |= 1 << D40_SREG_CFG_MST_POS; + dst |= D40_TYPE_TO_EVENT(cfg->dev_type); + + if (cfg->dst_info.flow_ctrl == STEDMA40_NO_FLOW_CTRL) + dst |= 1 << D40_SREG_CFG_PHY_TM_POS; + else + dst |= 3 << D40_SREG_CFG_PHY_TM_POS; + } + /* Interrupt on end of transfer for destination */ + dst |= 1 << D40_SREG_CFG_TIM_POS; + + /* Generate interrupt on error */ + src |= 1 << D40_SREG_CFG_EIM_POS; + dst |= 1 << D40_SREG_CFG_EIM_POS; + + /* PSIZE */ + if (cfg->src_info.psize != STEDMA40_PSIZE_PHY_1) { + src |= 1 << D40_SREG_CFG_PHY_PEN_POS; + src |= cfg->src_info.psize << D40_SREG_CFG_PSIZE_POS; + } + if (cfg->dst_info.psize != STEDMA40_PSIZE_PHY_1) { + dst |= 1 << D40_SREG_CFG_PHY_PEN_POS; + dst |= cfg->dst_info.psize << D40_SREG_CFG_PSIZE_POS; + } + + /* Element size */ + src |= cfg->src_info.data_width << D40_SREG_CFG_ESIZE_POS; + dst |= cfg->dst_info.data_width << D40_SREG_CFG_ESIZE_POS; + + /* Set the priority bit to high for the physical channel */ + if (cfg->high_priority) { + src |= 1 << D40_SREG_CFG_PRI_POS; + dst |= 1 << D40_SREG_CFG_PRI_POS; } if (cfg->src_info.big_endian) diff --git a/drivers/dma/ste_dma40_ll.h b/drivers/dma/ste_dma40_ll.h index fdde8ef77542..1b47312bc574 100644 --- a/drivers/dma/ste_dma40_ll.h +++ b/drivers/dma/ste_dma40_ll.h @@ -432,8 +432,7 @@ enum d40_lli_flags { void d40_phy_cfg(struct stedma40_chan_cfg *cfg, u32 *src_cfg, - u32 *dst_cfg, - bool is_log); + u32 *dst_cfg); void d40_log_cfg(struct stedma40_chan_cfg *cfg, u32 *lcsp1, -- cgit v1.2.3 From 9b233f9b2e927a93b3dc8b8e9c1d59f79be13dcc Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Wed, 15 May 2013 10:51:26 +0100 Subject: dmaengine: ste_dma40: Don't configure runtime configurable setup during allocate Using the dmaengine API for slave transfers, allocating and configuring a channel are two separate actions. Here we're removing logical channel configuration from the channel allocation routine for slave transfers, as the same config is already done in the runtime config function, and put the corresponding call into d40_config_memcpy() for the memcpy code path. Cc: Dan Williams Cc: Per Forlin Cc: Rabin Vincent Acked-by: Vinod Koul Signed-off-by: Lee Jones [Edited the commit message] Signed-off-by: Linus Walleij --- drivers/dma/ste_dma40.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/dma/ste_dma40.c b/drivers/dma/ste_dma40.c index b7fe46bd6a8e..ba84df8fc9d8 100644 --- a/drivers/dma/ste_dma40.c +++ b/drivers/dma/ste_dma40.c @@ -2040,6 +2040,9 @@ static int d40_config_memcpy(struct d40_chan *d40c) d40c->dma_cfg = dma40_memcpy_conf_log; d40c->dma_cfg.dev_type = dma40_memcpy_channels[d40c->chan.chan_id]; + d40_log_cfg(&d40c->dma_cfg, + &d40c->log_def.lcsp1, &d40c->log_def.lcsp3); + } else if (dma_has_cap(DMA_MEMCPY, cap) && dma_has_cap(DMA_SLAVE, cap)) { d40c->dma_cfg = dma40_memcpy_conf_phy; @@ -2508,9 +2511,6 @@ static int d40_alloc_chan_resources(struct dma_chan *chan) d40_set_prio_realtime(d40c); if (chan_is_logical(d40c)) { - d40_log_cfg(&d40c->dma_cfg, - &d40c->log_def.lcsp1, &d40c->log_def.lcsp3); - if (d40c->dma_cfg.dir == STEDMA40_PERIPH_TO_MEM) d40c->lcpa = d40c->base->lcpa_base + d40c->dma_cfg.dev_type * D40_LCPA_CHAN_SIZE; -- cgit v1.2.3 From b722487507b757b03e4e9cbb215f8965fa9b5e47 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Wed, 15 May 2013 10:51:27 +0100 Subject: ARM: ux500: Stop passing UART's platform data for Device Tree boots It was required to pass DMA channel configuration information to the UART driver before the new DMA API was in place. Now that it is, and is fully compatible with Device Tree we can stop doing that. Reviewed-by: Linus Walleij Signed-off-by: Lee Jones Signed-off-by: Linus Walleij --- arch/arm/mach-ux500/cpu-db8500.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c index 648fa0cd0123..959a105d2ba7 100644 --- a/arch/arm/mach-ux500/cpu-db8500.c +++ b/arch/arm/mach-ux500/cpu-db8500.c @@ -232,9 +232,9 @@ static struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = { /* Requires call-back bindings. */ OF_DEV_AUXDATA("arm,cortex-a9-pmu", 0, "arm-pmu", &db8500_pmu_platdata), /* Requires DMA bindings. */ - OF_DEV_AUXDATA("arm,pl011", 0x80120000, "uart0", &uart0_plat), - OF_DEV_AUXDATA("arm,pl011", 0x80121000, "uart1", &uart1_plat), - OF_DEV_AUXDATA("arm,pl011", 0x80007000, "uart2", &uart2_plat), + OF_DEV_AUXDATA("arm,pl011", 0x80120000, "uart0", NULL), + OF_DEV_AUXDATA("arm,pl011", 0x80121000, "uart1", NULL), + OF_DEV_AUXDATA("arm,pl011", 0x80007000, "uart2", NULL), OF_DEV_AUXDATA("arm,pl022", 0x80002000, "ssp0", &ssp0_plat), OF_DEV_AUXDATA("arm,pl18x", 0x80126000, "sdi0", &mop500_sdi0_data), OF_DEV_AUXDATA("arm,pl18x", 0x80118000, "sdi1", &mop500_sdi1_data), -- cgit v1.2.3 From ef9c89b3ec6916dd0b7db1563d51d85af3e7f031 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Wed, 15 May 2013 10:51:30 +0100 Subject: dmaengine: ste_dma40: Only use addresses passed as configuration information Addresses are passed in from the client's driver via the invocation of dmaengine_slave_config(), so there's no need to fetch them from platform data too, hardwired or otherwise. This is a great step forward, as it elevates a large burden from platform data in the way of a look-up table. Signed-off-by: Lee Jones Acked-by: Vinod Koul Signed-off-by: Linus Walleij --- drivers/dma/ste_dma40.c | 51 +++++++++++-------------------------------------- 1 file changed, 11 insertions(+), 40 deletions(-) diff --git a/drivers/dma/ste_dma40.c b/drivers/dma/ste_dma40.c index ba84df8fc9d8..57a127e5c896 100644 --- a/drivers/dma/ste_dma40.c +++ b/drivers/dma/ste_dma40.c @@ -1774,22 +1774,6 @@ static int d40_validate_conf(struct d40_chan *d40c, res = -EINVAL; } - if (conf->dir == STEDMA40_MEM_TO_PERIPH && - d40c->base->plat_data->dev_tx[conf->dev_type] == 0 && - d40c->runtime_addr == 0) { - chan_err(d40c, "Invalid TX channel address (%d)\n", - conf->dev_type); - res = -EINVAL; - } - - if (conf->dir == STEDMA40_PERIPH_TO_MEM && - d40c->base->plat_data->dev_rx[conf->dev_type] == 0 && - d40c->runtime_addr == 0) { - chan_err(d40c, "Invalid RX channel address (%d)\n", - conf->dev_type); - res = -EINVAL; - } - if (conf->dir == STEDMA40_PERIPH_TO_PERIPH) { /* * DMAC HW supports it. Will be added to this driver, @@ -2327,14 +2311,10 @@ d40_prep_sg(struct dma_chan *dchan, struct scatterlist *sg_src, if (sg_next(&sg_src[sg_len - 1]) == sg_src) desc->cyclic = true; - if (direction != DMA_TRANS_NONE) { - dma_addr_t dev_addr = d40_get_dev_addr(chan, direction); - - if (direction == DMA_DEV_TO_MEM) - src_dev_addr = dev_addr; - else if (direction == DMA_MEM_TO_DEV) - dst_dev_addr = dev_addr; - } + if (direction == DMA_DEV_TO_MEM) + src_dev_addr = chan->runtime_addr; + else if (direction == DMA_MEM_TO_DEV) + dst_dev_addr = chan->runtime_addr; if (chan_is_logical(chan)) ret = d40_prep_sg_log(chan, desc, sg_src, sg_dst, @@ -2782,15 +2762,8 @@ static int d40_set_runtime_config(struct dma_chan *chan, dst_maxburst = config->dst_maxburst; if (config->direction == DMA_DEV_TO_MEM) { - dma_addr_t dev_addr_rx = - d40c->base->plat_data->dev_rx[cfg->dev_type]; - config_addr = config->src_addr; - if (dev_addr_rx) - dev_dbg(d40c->base->dev, - "channel has a pre-wired RX address %08x " - "overriding with %08x\n", - dev_addr_rx, config_addr); + if (cfg->dir != STEDMA40_PERIPH_TO_MEM) dev_dbg(d40c->base->dev, "channel was not configured for peripheral " @@ -2805,15 +2778,8 @@ static int d40_set_runtime_config(struct dma_chan *chan, dst_maxburst = src_maxburst; } else if (config->direction == DMA_MEM_TO_DEV) { - dma_addr_t dev_addr_tx = - d40c->base->plat_data->dev_tx[cfg->dev_type]; - config_addr = config->dst_addr; - if (dev_addr_tx) - dev_dbg(d40c->base->dev, - "channel has a pre-wired TX address %08x " - "overriding with %08x\n", - dev_addr_tx, config_addr); + if (cfg->dir != STEDMA40_MEM_TO_PERIPH) dev_dbg(d40c->base->dev, "channel was not configured for memory " @@ -2833,6 +2799,11 @@ static int d40_set_runtime_config(struct dma_chan *chan, return -EINVAL; } + if (config_addr <= 0) { + dev_err(d40c->base->dev, "no address supplied\n"); + return -EINVAL; + } + if (src_maxburst * src_addr_width != dst_maxburst * dst_addr_width) { dev_err(d40c->base->dev, "src/dst width/maxburst mismatch: %d*%d != %d*%d\n", -- cgit v1.2.3 From 01c935c4ecbf6e67d8b7b8258c5eb3be84c248aa Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Wed, 15 May 2013 10:51:31 +0100 Subject: dmaengine: ste_dma40: Remove redundant address fetching function Addresses are now stored in local data structures and are easy to obtain, thus a specialist function used to fetch them is now surplus to requirement. Signed-off-by: Lee Jones Acked-by: Vinod Koul Signed-off-by: Linus Walleij --- drivers/dma/ste_dma40.c | 18 ------------------ 1 file changed, 18 deletions(-) diff --git a/drivers/dma/ste_dma40.c b/drivers/dma/ste_dma40.c index 57a127e5c896..6ed775736853 100644 --- a/drivers/dma/ste_dma40.c +++ b/drivers/dma/ste_dma40.c @@ -2267,24 +2267,6 @@ err: return NULL; } -static dma_addr_t -d40_get_dev_addr(struct d40_chan *chan, enum dma_transfer_direction direction) -{ - struct stedma40_platform_data *plat = chan->base->plat_data; - struct stedma40_chan_cfg *cfg = &chan->dma_cfg; - dma_addr_t addr = 0; - - if (chan->runtime_addr) - return chan->runtime_addr; - - if (direction == DMA_DEV_TO_MEM) - addr = plat->dev_rx[cfg->dev_type]; - else if (direction == DMA_MEM_TO_DEV) - addr = plat->dev_tx[cfg->dev_type]; - - return addr; -} - static struct dma_async_tx_descriptor * d40_prep_sg(struct dma_chan *dchan, struct scatterlist *sg_src, struct scatterlist *sg_dst, unsigned int sg_len, -- cgit v1.2.3 From 9c3c95147cdd30756a08c511c3c80e8fdf05a36a Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Wed, 15 May 2013 10:51:32 +0100 Subject: ARM: ux500: Remove DMA address look-up table DMA addresses are now passed as part of the dmaengine API by invoking dmaengine_slave_config(). So there's no requirement for the DMA40 driver to look them up in a table provided by platform data. This method does not fit in well using Device Tree either. Acked-by: Vinod Koul Signed-off-by: Lee Jones Signed-off-by: Linus Walleij --- arch/arm/mach-ux500/devices-db8500.c | 80 ----------------------------- include/linux/platform_data/dma-ste-dma40.h | 2 - 2 files changed, 82 deletions(-) diff --git a/arch/arm/mach-ux500/devices-db8500.c b/arch/arm/mach-ux500/devices-db8500.c index bed25a39e68b..e21ffd8c1412 100644 --- a/arch/arm/mach-ux500/devices-db8500.c +++ b/arch/arm/mach-ux500/devices-db8500.c @@ -42,87 +42,7 @@ static struct resource dma40_resources[] = { } }; -/* - * Mapping between destination event lines and physical device address. - * The event line is tied to a device and therefore the address is constant. - * When the address comes from a primecell it will be configured in runtime - * and we set the address to -1 as a placeholder. - */ -static const dma_addr_t dma40_tx_map[DB8500_DMA_NR_DEV] = { - /* MUSB - these will be runtime-reconfigured */ - [DB8500_DMA_DEV39_USB_OTG_IEP_AND_OEP_8] = -1, - [DB8500_DMA_DEV16_USB_OTG_IEP_AND_OEP_7_15] = -1, - [DB8500_DMA_DEV17_USB_OTG_IEP_AND_OEP_6_14] = -1, - [DB8500_DMA_DEV18_USB_OTG_IEP_AND_OEP_5_13] = -1, - [DB8500_DMA_DEV19_USB_OTG_IEP_AND_OEP_4_12] = -1, - [DB8500_DMA_DEV36_USB_OTG_IEP_AND_OEP_3_11] = -1, - [DB8500_DMA_DEV37_USB_OTG_IEP_AND_OEP_2_10] = -1, - [DB8500_DMA_DEV38_USB_OTG_IEP_AND_OEP_1_9] = -1, - /* PrimeCells - run-time configured */ - [DB8500_DMA_DEV0_SPI0] = -1, - [DB8500_DMA_DEV1_SD_MMC0] = -1, - [DB8500_DMA_DEV2_SD_MMC1] = -1, - [DB8500_DMA_DEV3_SD_MMC2] = -1, - [DB8500_DMA_DEV8_SSP0] = -1, - [DB8500_DMA_DEV9_SSP1] = -1, - [DB8500_DMA_DEV11_UART2] = -1, - [DB8500_DMA_DEV12_UART1] = -1, - [DB8500_DMA_DEV13_UART0] = -1, - [DB8500_DMA_DEV28_SD_MM2] = -1, - [DB8500_DMA_DEV29_SD_MM0] = -1, - [DB8500_DMA_DEV32_SD_MM1] = -1, - [DB8500_DMA_DEV33_SPI2] = -1, - [DB8500_DMA_DEV35_SPI1] = -1, - [DB8500_DMA_DEV40_SPI3] = -1, - [DB8500_DMA_DEV41_SD_MM3] = -1, - [DB8500_DMA_DEV42_SD_MM4] = -1, - [DB8500_DMA_DEV43_SD_MM5] = -1, - [DB8500_DMA_DEV14_MSP2] = U8500_MSP2_BASE + MSP_TX_RX_REG_OFFSET, - [DB8500_DMA_DEV30_MSP1] = U8500_MSP1_BASE + MSP_TX_RX_REG_OFFSET, - [DB8500_DMA_DEV31_MSP0_SLIM0_CH0] = U8500_MSP0_BASE + MSP_TX_RX_REG_OFFSET, - [DB8500_DMA_DEV48_CAC1] = U8500_CRYP1_BASE + CRYP1_TX_REG_OFFSET, - [DB8500_DMA_DEV50_HAC1_TX] = U8500_HASH1_BASE + HASH1_TX_REG_OFFSET, -}; - -/* Mapping between source event lines and physical device address */ -static const dma_addr_t dma40_rx_map[DB8500_DMA_NR_DEV] = { - /* MUSB - these will be runtime-reconfigured */ - [DB8500_DMA_DEV39_USB_OTG_IEP_AND_OEP_8] = -1, - [DB8500_DMA_DEV16_USB_OTG_IEP_AND_OEP_7_15] = -1, - [DB8500_DMA_DEV17_USB_OTG_IEP_AND_OEP_6_14] = -1, - [DB8500_DMA_DEV18_USB_OTG_IEP_AND_OEP_5_13] = -1, - [DB8500_DMA_DEV19_USB_OTG_IEP_AND_OEP_4_12] = -1, - [DB8500_DMA_DEV36_USB_OTG_IEP_AND_OEP_3_11] = -1, - [DB8500_DMA_DEV37_USB_OTG_IEP_AND_OEP_2_10] = -1, - [DB8500_DMA_DEV38_USB_OTG_IEP_AND_OEP_1_9] = -1, - /* PrimeCells */ - [DB8500_DMA_DEV0_SPI0] = -1, - [DB8500_DMA_DEV1_SD_MMC0] = -1, - [DB8500_DMA_DEV2_SD_MMC1] = -1, - [DB8500_DMA_DEV3_SD_MMC2] = -1, - [DB8500_DMA_DEV8_SSP0] = -1, - [DB8500_DMA_DEV9_SSP1] = -1, - [DB8500_DMA_DEV11_UART2] = -1, - [DB8500_DMA_DEV12_UART1] = -1, - [DB8500_DMA_DEV13_UART0] = -1, - [DB8500_DMA_DEV28_SD_MM2] = -1, - [DB8500_DMA_DEV29_SD_MM0] = -1, - [DB8500_DMA_DEV32_SD_MM1] = -1, - [DB8500_DMA_DEV33_SPI2] = -1, - [DB8500_DMA_DEV35_SPI1] = -1, - [DB8500_DMA_DEV40_SPI3] = -1, - [DB8500_DMA_DEV41_SD_MM3] = -1, - [DB8500_DMA_DEV42_SD_MM4] = -1, - [DB8500_DMA_DEV43_SD_MM5] = -1, - [DB8500_DMA_DEV14_MSP2] = U8500_MSP2_BASE + MSP_TX_RX_REG_OFFSET, - [DB8500_DMA_DEV30_MSP3] = U8500_MSP3_BASE + MSP_TX_RX_REG_OFFSET, - [DB8500_DMA_DEV31_MSP0_SLIM0_CH0] = U8500_MSP0_BASE + MSP_TX_RX_REG_OFFSET, - [DB8500_DMA_DEV48_CAC1] = U8500_CRYP1_BASE + CRYP1_RX_REG_OFFSET, -}; - struct stedma40_platform_data dma40_plat_data = { - .dev_rx = dma40_rx_map, - .dev_tx = dma40_tx_map, .disabled_channels = {-1}, }; diff --git a/include/linux/platform_data/dma-ste-dma40.h b/include/linux/platform_data/dma-ste-dma40.h index c54af61c9e48..af0064e3e139 100644 --- a/include/linux/platform_data/dma-ste-dma40.h +++ b/include/linux/platform_data/dma-ste-dma40.h @@ -152,8 +152,6 @@ struct stedma40_chan_cfg { * for 'multiple of 4' channels, like 8. */ struct stedma40_platform_data { - const dma_addr_t *dev_tx; - const dma_addr_t *dev_rx; int disabled_channels[STEDMA40_MAX_PHYS]; int *soft_lli_chans; int num_of_soft_lli_chans; -- cgit v1.2.3 From 5d489a435169d6e95bafcab048b5acc677c9bca7 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Wed, 15 May 2013 10:51:33 +0100 Subject: dmaengine: ste_dma40: Correct copy/paste error 'struct stedma40_half_channel_info's header comment says that it's called 'struct stedma40_chan_cfg'. Let's straighten that out. Signed-off-by: Lee Jones Acked-by: Vinod Koul Signed-off-by: Linus Walleij --- include/linux/platform_data/dma-ste-dma40.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/linux/platform_data/dma-ste-dma40.h b/include/linux/platform_data/dma-ste-dma40.h index af0064e3e139..288dc2420ee6 100644 --- a/include/linux/platform_data/dma-ste-dma40.h +++ b/include/linux/platform_data/dma-ste-dma40.h @@ -86,7 +86,7 @@ enum stedma40_xfer_dir { /** - * struct stedma40_chan_cfg - dst/src channel configuration + * struct stedma40_half_channel_info - dst/src channel configuration * * @big_endian: true if the src/dst should be read as big endian * @data_width: Data width of the src/dst hardware -- cgit v1.2.3 From 50511449dd89099067fd9727c96449b5bc048da6 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Wed, 15 May 2013 10:51:34 +0100 Subject: ARM: ux500: Remove unnecessary attributes from DMA channel request pdata DMA data width and packet size information is only required at channel configuration time. Any information passed from platform data is passed directly to the DMA40 driver to use during channel allocation, but these pieces of information are subsequently ignored by the driver, so we may as well remove them. Signed-off-by: Lee Jones Signed-off-by: Linus Walleij --- arch/arm/mach-ux500/usb.c | 8 -------- 1 file changed, 8 deletions(-) diff --git a/arch/arm/mach-ux500/usb.c b/arch/arm/mach-ux500/usb.c index 45af3031dfef..72754e369417 100644 --- a/arch/arm/mach-ux500/usb.c +++ b/arch/arm/mach-ux500/usb.c @@ -15,19 +15,11 @@ #define MUSB_DMA40_RX_CH { \ .mode = STEDMA40_MODE_LOGICAL, \ .dir = STEDMA40_PERIPH_TO_MEM, \ - .src_info.data_width = STEDMA40_WORD_WIDTH, \ - .dst_info.data_width = STEDMA40_WORD_WIDTH, \ - .src_info.psize = STEDMA40_PSIZE_LOG_16, \ - .dst_info.psize = STEDMA40_PSIZE_LOG_16, \ } #define MUSB_DMA40_TX_CH { \ .mode = STEDMA40_MODE_LOGICAL, \ .dir = STEDMA40_MEM_TO_PERIPH, \ - .src_info.data_width = STEDMA40_WORD_WIDTH, \ - .dst_info.data_width = STEDMA40_WORD_WIDTH, \ - .src_info.psize = STEDMA40_PSIZE_LOG_16, \ - .dst_info.psize = STEDMA40_PSIZE_LOG_16, \ } static struct stedma40_chan_cfg musb_dma_rx_ch[UX500_MUSB_DMA_NUM_RX_CHANNELS] -- cgit v1.2.3 From 58ba67dd36aa393132108ffcaa83873a1f82d70a Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Wed, 15 May 2013 10:51:35 +0100 Subject: crypto: ux500/hash - Prepare clock before enabling it If we fail to prepare the ux500-hash clock before enabling it the platform will fail to boot. Here we insure this happens. Cc: David S. Miller Cc: Andreas Westin Cc: linux-crypto@vger.kernel.org Acked-by: Herbert Xu Acked-by: Arnd Bergmann Acked-by: Ulf Hansson Signed-off-by: Lee Jones Signed-off-by: Linus Walleij --- drivers/crypto/ux500/hash/hash_core.c | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-) diff --git a/drivers/crypto/ux500/hash/hash_core.c b/drivers/crypto/ux500/hash/hash_core.c index cf5508967539..4b024280def1 100644 --- a/drivers/crypto/ux500/hash/hash_core.c +++ b/drivers/crypto/ux500/hash/hash_core.c @@ -1726,11 +1726,17 @@ static int ux500_hash_probe(struct platform_device *pdev) goto out_regulator; } + ret = clk_prepare(device_data->clk); + if (ret) { + dev_err(dev, "[%s] clk_prepare() failed!", __func__); + goto out_clk; + } + /* Enable device power (and clock) */ ret = hash_enable_power(device_data, false); if (ret) { dev_err(dev, "[%s]: hash_enable_power() failed!", __func__); - goto out_clk; + goto out_clk_unprepare; } ret = hash_check_hw(device_data); @@ -1762,6 +1768,9 @@ static int ux500_hash_probe(struct platform_device *pdev) out_power: hash_disable_power(device_data, false); +out_clk_unprepare: + clk_unprepare(device_data->clk); + out_clk: clk_put(device_data->clk); @@ -1826,6 +1835,7 @@ static int ux500_hash_remove(struct platform_device *pdev) dev_err(dev, "[%s]: hash_disable_power() failed", __func__); + clk_unprepare(device_data->clk); clk_put(device_data->clk); regulator_put(device_data->regulator); -- cgit v1.2.3 From 85c5632d1f7f487d6ac0fb187ee0dacded60abc4 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Wed, 15 May 2013 10:51:36 +0100 Subject: crypto: ux500/hash - Set DMA configuration though dma_slave_config() The DMA controller currently takes configuration information from information passed though dma_channel_request(), but it shouldn't. Using the API, the DMA channel should only be configured during a dma_slave_config() call. Cc: David S. Miller Cc: Andreas Westin Cc: linux-crypto@vger.kernel.org Acked-by: Herbert Xu Acked-by: Arnd Bergmann Signed-off-by: Lee Jones Signed-off-by: Linus Walleij --- drivers/crypto/ux500/hash/hash_alg.h | 5 ++++- drivers/crypto/ux500/hash/hash_core.c | 10 ++++++++++ 2 files changed, 14 insertions(+), 1 deletion(-) diff --git a/drivers/crypto/ux500/hash/hash_alg.h b/drivers/crypto/ux500/hash/hash_alg.h index cd9351cb24df..be6eb54da40f 100644 --- a/drivers/crypto/ux500/hash/hash_alg.h +++ b/drivers/crypto/ux500/hash/hash_alg.h @@ -11,6 +11,7 @@ #include #define HASH_BLOCK_SIZE 64 +#define HASH_DMA_FIFO 4 #define HASH_DMA_ALIGN_SIZE 4 #define HASH_DMA_PERFORMANCE_MIN_SIZE 1024 #define HASH_BYTES_PER_WORD 4 @@ -347,7 +348,8 @@ struct hash_req_ctx { /** * struct hash_device_data - structure for a hash device. - * @base: Pointer to the hardware base address. + * @base: Pointer to virtual base address of the hash device. + * @phybase: Pointer to physical memory location of the hash device. * @list_node: For inclusion in klist. * @dev: Pointer to the device dev structure. * @ctx_lock: Spinlock for current_ctx. @@ -361,6 +363,7 @@ struct hash_req_ctx { */ struct hash_device_data { struct hash_register __iomem *base; + phys_addr_t phybase; struct klist_node list_node; struct device *dev; struct spinlock ctx_lock; diff --git a/drivers/crypto/ux500/hash/hash_core.c b/drivers/crypto/ux500/hash/hash_core.c index 4b024280def1..62695764de1c 100644 --- a/drivers/crypto/ux500/hash/hash_core.c +++ b/drivers/crypto/ux500/hash/hash_core.c @@ -122,6 +122,13 @@ static void hash_dma_setup_channel(struct hash_device_data *device_data, struct device *dev) { struct hash_platform_data *platform_data = dev->platform_data; + struct dma_slave_config conf = { + .direction = DMA_MEM_TO_DEV, + .dst_addr = device_data->phybase + HASH_DMA_FIFO, + .dst_addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES, + .dst_maxburst = 16, + }; + dma_cap_zero(device_data->dma.mask); dma_cap_set(DMA_SLAVE, device_data->dma.mask); @@ -131,6 +138,8 @@ static void hash_dma_setup_channel(struct hash_device_data *device_data, platform_data->dma_filter, device_data->dma.cfg_mem2hash); + dmaengine_slave_config(device_data->dma.chan_mem2hash, &conf); + init_completion(&device_data->dma.complete); } @@ -1699,6 +1708,7 @@ static int ux500_hash_probe(struct platform_device *pdev) goto out_kfree; } + device_data->phybase = res->start; device_data->base = ioremap(res->start, resource_size(res)); if (!device_data->base) { dev_err(dev, "[%s] ioremap() failed!", -- cgit v1.2.3 From 4db17745c22429b89c55dbb8d9a072103bacd0de Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Wed, 15 May 2013 10:51:37 +0100 Subject: ARM: ux500: Stop passing Hash DMA channel config information though pdata DMA channel configuration information should be setup in the driver. The Ux500 Hash driver now does this, so there's no need to send it though here too. Acked-by: Arnd Bergmann Signed-off-by: Lee Jones Signed-off-by: Linus Walleij --- arch/arm/mach-ux500/board-mop500.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c index e3dafdd713c9..9426b86213bb 100644 --- a/arch/arm/mach-ux500/board-mop500.c +++ b/arch/arm/mach-ux500/board-mop500.c @@ -446,11 +446,7 @@ static struct cryp_platform_data u8500_cryp1_platform_data = { static struct stedma40_chan_cfg u8500_hash_dma_cfg_tx = { .dir = STEDMA40_MEM_TO_PERIPH, .dev_type = DB8500_DMA_DEV50_HAC1_TX, - .src_info.data_width = STEDMA40_WORD_WIDTH, - .dst_info.data_width = STEDMA40_WORD_WIDTH, .mode = STEDMA40_MODE_LOGICAL, - .src_info.psize = STEDMA40_PSIZE_LOG_16, - .dst_info.psize = STEDMA40_PSIZE_LOG_16, }; static struct hash_platform_data u8500_hash1_platform_data = { -- cgit v1.2.3 From 8703ffdd90c696bd66bb3247e59e76811fbdf22e Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Wed, 15 May 2013 10:51:38 +0100 Subject: crypto: ux500/cryp - Prepare clock before enabling it If we fail to prepare the ux500-cryp clock before enabling it the platform will fail to boot. Here we insure this happens. Cc: David S. Miller Cc: Andreas Westin Cc: linux-crypto@vger.kernel.org Acked-by: Herbert Xu Acked-by: Ulf Hansson Acked-by: Arnd Bergmann Signed-off-by: Lee Jones Signed-off-by: Linus Walleij --- drivers/crypto/ux500/cryp/cryp_core.c | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-) diff --git a/drivers/crypto/ux500/cryp/cryp_core.c b/drivers/crypto/ux500/cryp/cryp_core.c index 32f480622b97..ccdf17392411 100644 --- a/drivers/crypto/ux500/cryp/cryp_core.c +++ b/drivers/crypto/ux500/cryp/cryp_core.c @@ -1458,11 +1458,17 @@ static int ux500_cryp_probe(struct platform_device *pdev) goto out_regulator; } + ret = clk_prepare(device_data->clk); + if (ret) { + dev_err(dev, "[%s]: clk_prepare() failed!", __func__); + goto out_clk; + } + /* Enable device power (and clock) */ ret = cryp_enable_power(device_data->dev, device_data, false); if (ret) { dev_err(dev, "[%s]: cryp_enable_power() failed!", __func__); - goto out_clk; + goto out_clk_unprepare; } cryp_error = cryp_check(device_data); @@ -1523,6 +1529,9 @@ static int ux500_cryp_probe(struct platform_device *pdev) out_power: cryp_disable_power(device_data->dev, device_data, false); +out_clk_unprepare: + clk_unprepare(device_data->clk); + out_clk: clk_put(device_data->clk); @@ -1593,6 +1602,7 @@ static int ux500_cryp_remove(struct platform_device *pdev) dev_err(&pdev->dev, "[%s]: cryp_disable_power() failed", __func__); + clk_unprepare(device_data->clk); clk_put(device_data->clk); regulator_put(device_data->pwr_regulator); -- cgit v1.2.3 From 3fc63d762ff4595c90d4b9b5682a9655fc28cae4 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Wed, 15 May 2013 10:51:39 +0100 Subject: crypto: ux500/cryp - Set DMA configuration though dma_slave_config() The DMA controller currently takes configuration information from information passed though dma_channel_request(), but it shouldn't. Using the API, the DMA channel should only be configured during a dma_slave_config() call. Cc: David S. Miller Cc: Andreas Westin Cc: linux-crypto@vger.kernel.org Acked-by: Herbert Xu Acked-by: Arnd Bergmann Acked-by: Linus Walleij Signed-off-by: Lee Jones Signed-off-by: Linus Walleij --- drivers/crypto/ux500/cryp/cryp.h | 7 ++++++- drivers/crypto/ux500/cryp/cryp_core.c | 17 +++++++++++++++++ 2 files changed, 23 insertions(+), 1 deletion(-) diff --git a/drivers/crypto/ux500/cryp/cryp.h b/drivers/crypto/ux500/cryp/cryp.h index 14cfd05b777a..d1d6606fe56c 100644 --- a/drivers/crypto/ux500/cryp/cryp.h +++ b/drivers/crypto/ux500/cryp/cryp.h @@ -114,6 +114,9 @@ enum cryp_status_id { }; /* Cryp DMA interface */ +#define CRYP_DMA_TX_FIFO 0x08 +#define CRYP_DMA_RX_FIFO 0x10 + enum cryp_dma_req_type { CRYP_DMA_DISABLE_BOTH, CRYP_DMA_ENABLE_IN_DATA, @@ -217,7 +220,8 @@ struct cryp_dma { /** * struct cryp_device_data - structure for a cryp device. - * @base: Pointer to the hardware base address. + * @base: Pointer to virtual base address of the cryp device. + * @phybase: Pointer to physical memory location of the cryp device. * @dev: Pointer to the devices dev structure. * @clk: Pointer to the device's clock control. * @pwr_regulator: Pointer to the device's power control. @@ -232,6 +236,7 @@ struct cryp_dma { */ struct cryp_device_data { struct cryp_register __iomem *base; + phys_addr_t phybase; struct device *dev; struct clk *clk; struct regulator *pwr_regulator; diff --git a/drivers/crypto/ux500/cryp/cryp_core.c b/drivers/crypto/ux500/cryp/cryp_core.c index ccdf17392411..d9c863d5ba7d 100644 --- a/drivers/crypto/ux500/cryp/cryp_core.c +++ b/drivers/crypto/ux500/cryp/cryp_core.c @@ -475,6 +475,19 @@ static int cryp_get_device_data(struct cryp_ctx *ctx, static void cryp_dma_setup_channel(struct cryp_device_data *device_data, struct device *dev) { + struct dma_slave_config mem2cryp = { + .direction = DMA_MEM_TO_DEV, + .dst_addr = device_data->phybase + CRYP_DMA_TX_FIFO, + .dst_addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES, + .dst_maxburst = 4, + }; + struct dma_slave_config cryp2mem = { + .direction = DMA_DEV_TO_MEM, + .src_addr = device_data->phybase + CRYP_DMA_RX_FIFO, + .src_addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES, + .src_maxburst = 4, + }; + dma_cap_zero(device_data->dma.mask); dma_cap_set(DMA_SLAVE, device_data->dma.mask); @@ -490,6 +503,9 @@ static void cryp_dma_setup_channel(struct cryp_device_data *device_data, stedma40_filter, device_data->dma.cfg_cryp2mem); + dmaengine_slave_config(device_data->dma.chan_mem2cryp, &mem2cryp); + dmaengine_slave_config(device_data->dma.chan_cryp2mem, &cryp2mem); + init_completion(&device_data->dma.cryp_dma_complete); } @@ -1431,6 +1447,7 @@ static int ux500_cryp_probe(struct platform_device *pdev) goto out_kfree; } + device_data->phybase = res->start; device_data->base = ioremap(res->start, resource_size(res)); if (!device_data->base) { dev_err(dev, "[%s]: ioremap failed!", __func__); -- cgit v1.2.3 From 75dc6893f5eaf42ddb9cbab841d29a68079f799a Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Wed, 15 May 2013 10:51:40 +0100 Subject: ARM: ux500: Stop passing Cryp DMA channel config information though pdata DMA channel configuration information should be setup in the driver. The Ux500 Cryp driver now does this, so there's no need to send it though here too. Acked-by: Arnd Bergmann Signed-off-by: Lee Jones Signed-off-by: Linus Walleij --- arch/arm/mach-ux500/board-mop500.c | 8 -------- 1 file changed, 8 deletions(-) diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c index 9426b86213bb..f747c6476aa3 100644 --- a/arch/arm/mach-ux500/board-mop500.c +++ b/arch/arm/mach-ux500/board-mop500.c @@ -426,20 +426,12 @@ static struct cryp_platform_data u8500_cryp1_platform_data = { .mem_to_engine = { .dir = STEDMA40_MEM_TO_PERIPH, .dev_type = DB8500_DMA_DEV48_CAC1, - .src_info.data_width = STEDMA40_WORD_WIDTH, - .dst_info.data_width = STEDMA40_WORD_WIDTH, .mode = STEDMA40_MODE_LOGICAL, - .src_info.psize = STEDMA40_PSIZE_LOG_4, - .dst_info.psize = STEDMA40_PSIZE_LOG_4, }, .engine_to_mem = { .dir = STEDMA40_PERIPH_TO_MEM, .dev_type = DB8500_DMA_DEV48_CAC1, - .src_info.data_width = STEDMA40_WORD_WIDTH, - .dst_info.data_width = STEDMA40_WORD_WIDTH, .mode = STEDMA40_MODE_LOGICAL, - .src_info.psize = STEDMA40_PSIZE_LOG_4, - .dst_info.psize = STEDMA40_PSIZE_LOG_4, } }; -- cgit v1.2.3 From de97630d52069c96476dc156badaf1e2f74c55d5 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Wed, 15 May 2013 10:51:41 +0100 Subject: crypto: ux500/[cryp|hash] - Show successful start-up in the bootlog The Cryp driver is currently silent and the Hash driver prints the name of its probe function unnecessarily. Let's just put a nice descriptive one-liner there instead. Cc: David S. Miller Cc: Andreas Westin Cc: linux-crypto@vger.kernel.org Acked-by: Herbert Xu Acked-by: Arnd Bergmann Signed-off-by: Lee Jones Signed-off-by: Linus Walleij --- drivers/crypto/ux500/cryp/cryp_core.c | 2 ++ drivers/crypto/ux500/hash/hash_core.c | 2 +- 2 files changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/crypto/ux500/cryp/cryp_core.c b/drivers/crypto/ux500/cryp/cryp_core.c index d9c863d5ba7d..4f8b11af29a6 100644 --- a/drivers/crypto/ux500/cryp/cryp_core.c +++ b/drivers/crypto/ux500/cryp/cryp_core.c @@ -1541,6 +1541,8 @@ static int ux500_cryp_probe(struct platform_device *pdev) goto out_power; } + dev_info(dev, "successfully registered\n"); + return 0; out_power: diff --git a/drivers/crypto/ux500/hash/hash_core.c b/drivers/crypto/ux500/hash/hash_core.c index 62695764de1c..9ca6fbb5e30d 100644 --- a/drivers/crypto/ux500/hash/hash_core.c +++ b/drivers/crypto/ux500/hash/hash_core.c @@ -1772,7 +1772,7 @@ static int ux500_hash_probe(struct platform_device *pdev) goto out_power; } - dev_info(dev, "[%s] successfully probed\n", __func__); + dev_info(dev, "successfully registered\n"); return 0; out_power: -- cgit v1.2.3 From 95e4bf98520c9a92cd1b87d12c89e8c60c5fe2ca Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Wed, 15 May 2013 10:51:42 +0100 Subject: ARM: ux500: Register Cryp and Hash platform drivers on Snowball These drivers are now operational and even use the latest common clk and DMA APIs. There's no reason why we shouldn't start them up now. Signed-off-by: Lee Jones Signed-off-by: Linus Walleij --- arch/arm/mach-ux500/board-mop500.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c index f747c6476aa3..3507399d8909 100644 --- a/arch/arm/mach-ux500/board-mop500.c +++ b/arch/arm/mach-ux500/board-mop500.c @@ -637,6 +637,8 @@ static void __init snowball_init_machine(void) mop500_snowball_ethernet_clock_enable(); + u8500_cryp1_hash1_init(parent); + /* This board has full regulator constraints */ regulator_has_full_constraints(); } -- cgit v1.2.3 From 68522de70e4b08445c10cded43c08b016ebda538 Mon Sep 17 00:00:00 2001 From: Jean-Christophe PLAGNIOL-VILLARD Date: Mon, 20 May 2013 22:36:23 +0800 Subject: USB: gadget: atmel_usba: move global struct usba_ep usba_ep to struct usba_udc so we can have multiple usb gadget instance Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD Acked-by: Felipe Balbi Acked-by: Nicolas Ferre Tested-by: Bo Shen --- drivers/usb/gadget/atmel_usba_udc.c | 20 +++++++++++--------- drivers/usb/gadget/atmel_usba_udc.h | 1 + 2 files changed, 12 insertions(+), 9 deletions(-) diff --git a/drivers/usb/gadget/atmel_usba_udc.c b/drivers/usb/gadget/atmel_usba_udc.c index f2a970f75bfa..d2ffd0438a6b 100644 --- a/drivers/usb/gadget/atmel_usba_udc.c +++ b/drivers/usb/gadget/atmel_usba_udc.c @@ -29,7 +29,6 @@ static struct usba_udc the_udc; -static struct usba_ep *usba_ep; #ifdef CONFIG_USB_GADGET_DEBUG_FS #include @@ -1147,7 +1146,7 @@ static int do_test_mode(struct usba_udc *udc) * Test_SE0_NAK: Force high-speed mode and set up ep0 * for Bulk IN transfers */ - ep = &usba_ep[0]; + ep = &udc->usba_ep[0]; usba_writel(udc, TST, USBA_BF(SPEED_CFG, USBA_SPEED_CFG_FORCE_HIGH)); usba_ep_writel(ep, CFG, @@ -1165,7 +1164,7 @@ static int do_test_mode(struct usba_udc *udc) break; case 0x0400: /* Test_Packet */ - ep = &usba_ep[0]; + ep = &udc->usba_ep[0]; usba_ep_writel(ep, CFG, USBA_BF(EPT_SIZE, USBA_EPT_SIZE_64) | USBA_EPT_DIR_IN @@ -1668,7 +1667,7 @@ static irqreturn_t usba_udc_irq(int irq, void *devid) for (i = 1; i < USBA_NR_ENDPOINTS; i++) if (dma_status & (1 << i)) - usba_dma_irq(udc, &usba_ep[i]); + usba_dma_irq(udc, &udc->usba_ep[i]); } ep_status = USBA_BFEXT(EPT_INT, status); @@ -1677,10 +1676,10 @@ static irqreturn_t usba_udc_irq(int irq, void *devid) for (i = 0; i < USBA_NR_ENDPOINTS; i++) if (ep_status & (1 << i)) { - if (ep_is_control(&usba_ep[i])) - usba_control_irq(udc, &usba_ep[i]); + if (ep_is_control(&udc->usba_ep[i])) + usba_control_irq(udc, &udc->usba_ep[i]); else - usba_ep_irq(udc, &usba_ep[i]); + usba_ep_irq(udc, &udc->usba_ep[i]); } } @@ -1705,7 +1704,7 @@ static irqreturn_t usba_udc_irq(int irq, void *devid) DBG(DBG_BUS, "%s bus reset detected\n", usb_speed_string(udc->gadget.speed)); - ep0 = &usba_ep[0]; + ep0 = &udc->usba_ep[0]; ep0->ep.desc = &usba_ep0_desc; ep0->state = WAIT_FOR_SETUP; usba_ep_writel(ep0, CFG, @@ -1841,6 +1840,7 @@ static int __init usba_udc_probe(struct platform_device *pdev) struct resource *regs, *fifo; struct clk *pclk, *hclk; struct usba_udc *udc = &the_udc; + static struct usba_ep *usba_ep; int irq, ret, i; regs = platform_get_resource(pdev, IORESOURCE_MEM, CTRL_IOMEM_ID); @@ -1896,6 +1896,8 @@ static int __init usba_udc_probe(struct platform_device *pdev) if (!usba_ep) goto err_alloc_ep; + udc->usba_ep = usba_ep; + the_udc.gadget.ep0 = &usba_ep[0].ep; INIT_LIST_HEAD(&usba_ep[0].ep.ep_list); @@ -2008,7 +2010,7 @@ static int __exit usba_udc_remove(struct platform_device *pdev) usb_del_gadget_udc(&udc->gadget); for (i = 1; i < pdata->num_ep; i++) - usba_ep_cleanup_debugfs(&usba_ep[i]); + usba_ep_cleanup_debugfs(&udc->usba_ep[i]); usba_cleanup_debugfs(udc); if (gpio_is_valid(udc->vbus_pin)) { diff --git a/drivers/usb/gadget/atmel_usba_udc.h b/drivers/usb/gadget/atmel_usba_udc.h index d65a61851d3d..08419867013f 100644 --- a/drivers/usb/gadget/atmel_usba_udc.h +++ b/drivers/usb/gadget/atmel_usba_udc.h @@ -319,6 +319,7 @@ struct usba_udc { int vbus_pin_inverted; struct clk *pclk; struct clk *hclk; + struct usba_ep *usba_ep; u16 devstatus; -- cgit v1.2.3 From e8f2ea39327a1f76aa9f0c606812eb0b154b8e45 Mon Sep 17 00:00:00 2001 From: Jean-Christophe PLAGNIOL-VILLARD Date: Mon, 20 May 2013 22:46:02 +0800 Subject: USB: gadget: atmel_usba: allow multi instance drop static struct usba_udc the_udc Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD Acked-by: Felipe Balbi Acked-by: Nicolas Ferre Tested-by: Bo Shen --- drivers/usb/gadget/atmel_usba_udc.c | 36 ++++++++++++++++++------------------ 1 file changed, 18 insertions(+), 18 deletions(-) diff --git a/drivers/usb/gadget/atmel_usba_udc.c b/drivers/usb/gadget/atmel_usba_udc.c index d2ffd0438a6b..eea57a3ca778 100644 --- a/drivers/usb/gadget/atmel_usba_udc.c +++ b/drivers/usb/gadget/atmel_usba_udc.c @@ -27,9 +27,6 @@ #include "atmel_usba_udc.h" - -static struct usba_udc the_udc; - #ifdef CONFIG_USB_GADGET_DEBUG_FS #include #include @@ -1013,16 +1010,13 @@ static void nop_release(struct device *dev) } -static struct usba_udc the_udc = { - .gadget = { - .ops = &usba_udc_ops, - .ep_list = LIST_HEAD_INIT(the_udc.gadget.ep_list), - .max_speed = USB_SPEED_HIGH, - .name = "atmel_usba_udc", - .dev = { - .init_name = "gadget", - .release = nop_release, - }, +struct usb_gadget usba_gadget_template = { + .ops = &usba_udc_ops, + .max_speed = USB_SPEED_HIGH, + .name = "atmel_usba_udc", + .dev = { + .init_name = "gadget", + .release = nop_release, }, }; @@ -1839,10 +1833,17 @@ static int __init usba_udc_probe(struct platform_device *pdev) struct usba_platform_data *pdata = pdev->dev.platform_data; struct resource *regs, *fifo; struct clk *pclk, *hclk; - struct usba_udc *udc = &the_udc; + struct usba_udc *udc; static struct usba_ep *usba_ep; int irq, ret, i; + udc = devm_kzalloc(&pdev->dev, sizeof(*udc), GFP_KERNEL); + if (!udc) + return -ENOMEM; + + udc->gadget = usba_gadget_template; + INIT_LIST_HEAD(&udc->gadget.ep_list); + regs = platform_get_resource(pdev, IORESOURCE_MEM, CTRL_IOMEM_ID); fifo = platform_get_resource(pdev, IORESOURCE_MEM, FIFO_IOMEM_ID); if (!regs || !fifo || !pdata) @@ -1897,8 +1898,7 @@ static int __init usba_udc_probe(struct platform_device *pdev) goto err_alloc_ep; udc->usba_ep = usba_ep; - - the_udc.gadget.ep0 = &usba_ep[0].ep; + udc->gadget.ep0 = &usba_ep[0].ep; INIT_LIST_HEAD(&usba_ep[0].ep.ep_list); usba_ep[0].ep_regs = udc->regs + USBA_EPT_BASE(0); @@ -1907,7 +1907,7 @@ static int __init usba_udc_probe(struct platform_device *pdev) usba_ep[0].ep.ops = &usba_ep_ops; usba_ep[0].ep.name = pdata->ep[0].name; usba_ep[0].ep.maxpacket = pdata->ep[0].fifo_size; - usba_ep[0].udc = &the_udc; + usba_ep[0].udc = udc; INIT_LIST_HEAD(&usba_ep[0].queue); usba_ep[0].fifo_size = pdata->ep[0].fifo_size; usba_ep[0].nr_banks = pdata->ep[0].nr_banks; @@ -1924,7 +1924,7 @@ static int __init usba_udc_probe(struct platform_device *pdev) ep->ep.ops = &usba_ep_ops; ep->ep.name = pdata->ep[i].name; ep->ep.maxpacket = pdata->ep[i].fifo_size; - ep->udc = &the_udc; + ep->udc = udc; INIT_LIST_HEAD(&ep->queue); ep->fifo_size = pdata->ep[i].fifo_size; ep->nr_banks = pdata->ep[i].nr_banks; -- cgit v1.2.3 From 4a3ae9324ebeb9715369d2bca799bfd7dcff6dd7 Mon Sep 17 00:00:00 2001 From: Jean-Christophe PLAGNIOL-VILLARD Date: Fri, 3 May 2013 20:22:57 +0800 Subject: USB: gadget: atmel_usba: add DT support Allow to compile the driver all the time if AT91 enabled. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD Acked-by: Felipe Balbi Acked-by: Nicolas Ferre Tested-by: Bo Shen --- .../devicetree/bindings/usb/atmel-usb.txt | 82 ++++++++ drivers/usb/gadget/Kconfig | 2 +- drivers/usb/gadget/atmel_usba_udc.c | 220 +++++++++++++++------ drivers/usb/gadget/atmel_usba_udc.h | 1 + 4 files changed, 245 insertions(+), 60 deletions(-) diff --git a/Documentation/devicetree/bindings/usb/atmel-usb.txt b/Documentation/devicetree/bindings/usb/atmel-usb.txt index 60bd2150a3e6..55f51af08bc7 100644 --- a/Documentation/devicetree/bindings/usb/atmel-usb.txt +++ b/Documentation/devicetree/bindings/usb/atmel-usb.txt @@ -47,3 +47,85 @@ usb1: gadget@fffa4000 { interrupts = <10 4>; atmel,vbus-gpio = <&pioC 5 0>; }; + +Atmel High-Speed USB device controller + +Required properties: + - compatible: Should be "atmel,at91sam9rl-udc" + - reg: Address and length of the register set for the device + - interrupts: Should contain usba interrupt + - ep childnode: To specify the number of endpoints and their properties. + +Optional properties: + - atmel,vbus-gpio: If present, specifies a gpio that needs to be + activated for the bus to be powered. + +Required child node properties: + - name: Name of the endpoint. + - reg: Num of the endpoint. + - atmel,fifo-size: Size of the fifo. + - atmel,nb-banks: Number of banks. + - atmel,can-dma: Boolean to specify if the endpoint support DMA. + - atmel,can-isoc: Boolean to specify if the endpoint support ISOC. + +usb2: gadget@fff78000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "atmel,at91sam9rl-udc"; + reg = <0x00600000 0x80000 + 0xfff78000 0x400>; + interrupts = <27 4 0>; + atmel,vbus-gpio = <&pioB 19 0>; + + ep0 { + reg = <0>; + atmel,fifo-size = <64>; + atmel,nb-banks = <1>; + }; + + ep1 { + reg = <1>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <2>; + atmel,can-dma; + atmel,can-isoc; + }; + + ep2 { + reg = <2>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <2>; + atmel,can-dma; + atmel,can-isoc; + }; + + ep3 { + reg = <3>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <3>; + atmel,can-dma; + }; + + ep4 { + reg = <4>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <3>; + atmel,can-dma; + }; + + ep5 { + reg = <5>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <3>; + atmel,can-dma; + atmel,can-isoc; + }; + + ep6 { + reg = <6>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <3>; + atmel,can-dma; + atmel,can-isoc; + }; +}; diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig index 83300d94a893..5e47d50f01ca 100644 --- a/drivers/usb/gadget/Kconfig +++ b/drivers/usb/gadget/Kconfig @@ -156,7 +156,7 @@ config USB_LPC32XX config USB_ATMEL_USBA tristate "Atmel USBA" - depends on AVR32 || ARCH_AT91SAM9RL || ARCH_AT91SAM9G45 + depends on AVR32 || ARCH_AT91 help USBA is the integrated high-speed USB Device controller on the AT32AP700x, some AT91SAM9 and AT91CAP9 processors from Atmel. diff --git a/drivers/usb/gadget/atmel_usba_udc.c b/drivers/usb/gadget/atmel_usba_udc.c index eea57a3ca778..f89ce5eb2704 100644 --- a/drivers/usb/gadget/atmel_usba_udc.c +++ b/drivers/usb/gadget/atmel_usba_udc.c @@ -22,6 +22,8 @@ #include #include #include +#include +#include #include @@ -1828,13 +1830,146 @@ static int atmel_usba_stop(struct usb_gadget *gadget, return 0; } -static int __init usba_udc_probe(struct platform_device *pdev) +#ifdef CONFIG_OF +static struct usba_ep * atmel_udc_of_init(struct platform_device *pdev, + struct usba_udc *udc) +{ + u32 val; + const char *name; + enum of_gpio_flags flags; + struct device_node *np = pdev->dev.of_node; + struct device_node *pp; + int i, ret; + struct usba_ep *eps, *ep; + + udc->num_ep = 0; + + udc->vbus_pin = of_get_named_gpio_flags(np, "atmel,vbus-gpio", 0, + &flags); + udc->vbus_pin_inverted = (flags & OF_GPIO_ACTIVE_LOW) ? 1 : 0; + + pp = NULL; + while ((pp = of_get_next_child(np, pp))) + udc->num_ep++; + + eps = devm_kzalloc(&pdev->dev, sizeof(struct usba_ep) * udc->num_ep, + GFP_KERNEL); + if (!eps) + return ERR_PTR(-ENOMEM); + + udc->gadget.ep0 = &eps[0].ep; + + INIT_LIST_HEAD(&eps[0].ep.ep_list); + + pp = NULL; + i = 0; + while ((pp = of_get_next_child(np, pp))) { + ep = &eps[i]; + + ret = of_property_read_u32(pp, "reg", &val); + if (ret) { + dev_err(&pdev->dev, "of_probe: reg error(%d)\n", ret); + goto err; + } + ep->index = val; + + ret = of_property_read_u32(pp, "atmel,fifo-size", &val); + if (ret) { + dev_err(&pdev->dev, "of_probe: fifo-size error(%d)\n", ret); + goto err; + } + ep->fifo_size = val; + + ret = of_property_read_u32(pp, "atmel,nb-banks", &val); + if (ret) { + dev_err(&pdev->dev, "of_probe: nb-banks error(%d)\n", ret); + goto err; + } + ep->nr_banks = val; + + ep->can_dma = of_property_read_bool(pp, "atmel,can-dma"); + ep->can_isoc = of_property_read_bool(pp, "atmel,can-isoc"); + + ret = of_property_read_string(pp, "name", &name); + ep->ep.name = name; + + ep->ep_regs = udc->regs + USBA_EPT_BASE(i); + ep->dma_regs = udc->regs + USBA_DMA_BASE(i); + ep->fifo = udc->fifo + USBA_FIFO_BASE(i); + ep->ep.ops = &usba_ep_ops; + ep->ep.maxpacket = ep->fifo_size; + ep->udc = udc; + INIT_LIST_HEAD(&ep->queue); + + if (i) + list_add_tail(&ep->ep.ep_list, &udc->gadget.ep_list); + + i++; + } + + return eps; +err: + return ERR_PTR(ret); +} +#else +static struct usba_ep * atmel_udc_of_init(struct platform_device *pdev, + struct usba_udc *udc) +{ + return ERR_PTR(-ENOSYS); +} +#endif + +static struct usba_ep * usba_udc_pdata(struct platform_device *pdev, + struct usba_udc *udc) { struct usba_platform_data *pdata = pdev->dev.platform_data; + struct usba_ep *eps; + int i; + + if (!pdata) + return ERR_PTR(-ENXIO); + + eps = devm_kzalloc(&pdev->dev, sizeof(struct usba_ep) * pdata->num_ep, + GFP_KERNEL); + if (!eps) + return ERR_PTR(-ENOMEM); + + udc->gadget.ep0 = &eps[0].ep; + + udc->vbus_pin = pdata->vbus_pin; + udc->vbus_pin_inverted = pdata->vbus_pin_inverted; + udc->num_ep = pdata->num_ep; + + INIT_LIST_HEAD(&eps[0].ep.ep_list); + + for (i = 0; i < pdata->num_ep; i++) { + struct usba_ep *ep = &eps[i]; + + ep->ep_regs = udc->regs + USBA_EPT_BASE(i); + ep->dma_regs = udc->regs + USBA_DMA_BASE(i); + ep->fifo = udc->fifo + USBA_FIFO_BASE(i); + ep->ep.ops = &usba_ep_ops; + ep->ep.name = pdata->ep[i].name; + ep->fifo_size = ep->ep.maxpacket = pdata->ep[i].fifo_size; + ep->udc = udc; + INIT_LIST_HEAD(&ep->queue); + ep->nr_banks = pdata->ep[i].nr_banks; + ep->index = pdata->ep[i].index; + ep->can_dma = pdata->ep[i].can_dma; + ep->can_isoc = pdata->ep[i].can_isoc; + + if (i) + list_add_tail(&ep->ep.ep_list, &udc->gadget.ep_list); + } + + return eps; +} + +static int __init usba_udc_probe(struct platform_device *pdev) +{ struct resource *regs, *fifo; struct clk *pclk, *hclk; struct usba_udc *udc; - static struct usba_ep *usba_ep; int irq, ret, i; udc = devm_kzalloc(&pdev->dev, sizeof(*udc), GFP_KERNEL); @@ -1846,7 +1981,7 @@ static int __init usba_udc_probe(struct platform_device *pdev) regs = platform_get_resource(pdev, IORESOURCE_MEM, CTRL_IOMEM_ID); fifo = platform_get_resource(pdev, IORESOURCE_MEM, FIFO_IOMEM_ID); - if (!regs || !fifo || !pdata) + if (!regs || !fifo) return -ENXIO; irq = platform_get_irq(pdev, 0); @@ -1892,47 +2027,14 @@ static int __init usba_udc_probe(struct platform_device *pdev) usba_writel(udc, CTRL, USBA_DISABLE_MASK); clk_disable(pclk); - usba_ep = kzalloc(sizeof(struct usba_ep) * pdata->num_ep, - GFP_KERNEL); - if (!usba_ep) - goto err_alloc_ep; - - udc->usba_ep = usba_ep; - udc->gadget.ep0 = &usba_ep[0].ep; - - INIT_LIST_HEAD(&usba_ep[0].ep.ep_list); - usba_ep[0].ep_regs = udc->regs + USBA_EPT_BASE(0); - usba_ep[0].dma_regs = udc->regs + USBA_DMA_BASE(0); - usba_ep[0].fifo = udc->fifo + USBA_FIFO_BASE(0); - usba_ep[0].ep.ops = &usba_ep_ops; - usba_ep[0].ep.name = pdata->ep[0].name; - usba_ep[0].ep.maxpacket = pdata->ep[0].fifo_size; - usba_ep[0].udc = udc; - INIT_LIST_HEAD(&usba_ep[0].queue); - usba_ep[0].fifo_size = pdata->ep[0].fifo_size; - usba_ep[0].nr_banks = pdata->ep[0].nr_banks; - usba_ep[0].index = pdata->ep[0].index; - usba_ep[0].can_dma = pdata->ep[0].can_dma; - usba_ep[0].can_isoc = pdata->ep[0].can_isoc; - - for (i = 1; i < pdata->num_ep; i++) { - struct usba_ep *ep = &usba_ep[i]; - - ep->ep_regs = udc->regs + USBA_EPT_BASE(i); - ep->dma_regs = udc->regs + USBA_DMA_BASE(i); - ep->fifo = udc->fifo + USBA_FIFO_BASE(i); - ep->ep.ops = &usba_ep_ops; - ep->ep.name = pdata->ep[i].name; - ep->ep.maxpacket = pdata->ep[i].fifo_size; - ep->udc = udc; - INIT_LIST_HEAD(&ep->queue); - ep->fifo_size = pdata->ep[i].fifo_size; - ep->nr_banks = pdata->ep[i].nr_banks; - ep->index = pdata->ep[i].index; - ep->can_dma = pdata->ep[i].can_dma; - ep->can_isoc = pdata->ep[i].can_isoc; + if (pdev->dev.of_node) + udc->usba_ep = atmel_udc_of_init(pdev, udc); + else + udc->usba_ep = usba_udc_pdata(pdev, udc); - list_add_tail(&ep->ep.ep_list, &udc->gadget.ep_list); + if (IS_ERR(udc->usba_ep)) { + ret = PTR_ERR(udc->usba_ep); + goto err_alloc_ep; } ret = request_irq(irq, usba_udc_irq, 0, "atmel_usba_udc", udc); @@ -1943,16 +2045,12 @@ static int __init usba_udc_probe(struct platform_device *pdev) } udc->irq = irq; - if (gpio_is_valid(pdata->vbus_pin)) { - if (!gpio_request(pdata->vbus_pin, "atmel_usba_udc")) { - udc->vbus_pin = pdata->vbus_pin; - udc->vbus_pin_inverted = pdata->vbus_pin_inverted; - + if (gpio_is_valid(udc->vbus_pin)) { + if (!devm_gpio_request(&pdev->dev, udc->vbus_pin, "atmel_usba_udc")) { ret = request_irq(gpio_to_irq(udc->vbus_pin), usba_vbus_irq, 0, "atmel_usba_udc", udc); if (ret) { - gpio_free(udc->vbus_pin); udc->vbus_pin = -ENODEV; dev_warn(&udc->pdev->dev, "failed to request vbus irq; " @@ -1971,20 +2069,17 @@ static int __init usba_udc_probe(struct platform_device *pdev) goto err_add_udc; usba_init_debugfs(udc); - for (i = 1; i < pdata->num_ep; i++) - usba_ep_init_debugfs(udc, &usba_ep[i]); + for (i = 1; i < udc->num_ep; i++) + usba_ep_init_debugfs(udc, &udc->usba_ep[i]); return 0; err_add_udc: - if (gpio_is_valid(pdata->vbus_pin)) { + if (gpio_is_valid(udc->vbus_pin)) free_irq(gpio_to_irq(udc->vbus_pin), udc); - gpio_free(udc->vbus_pin); - } free_irq(irq, udc); err_request_irq: - kfree(usba_ep); err_alloc_ep: iounmap(udc->fifo); err_map_fifo: @@ -2003,23 +2098,20 @@ static int __exit usba_udc_remove(struct platform_device *pdev) { struct usba_udc *udc; int i; - struct usba_platform_data *pdata = pdev->dev.platform_data; udc = platform_get_drvdata(pdev); usb_del_gadget_udc(&udc->gadget); - for (i = 1; i < pdata->num_ep; i++) + for (i = 1; i < udc->num_ep; i++) usba_ep_cleanup_debugfs(&udc->usba_ep[i]); usba_cleanup_debugfs(udc); if (gpio_is_valid(udc->vbus_pin)) { free_irq(gpio_to_irq(udc->vbus_pin), udc); - gpio_free(udc->vbus_pin); } free_irq(udc->irq, udc); - kfree(usba_ep); iounmap(udc->fifo); iounmap(udc->regs); clk_put(udc->hclk); @@ -2028,11 +2120,21 @@ static int __exit usba_udc_remove(struct platform_device *pdev) return 0; } +#if defined(CONFIG_OF) +static const struct of_device_id atmel_udc_dt_ids[] = { + { .compatible = "atmel,at91sam9rl-udc" }, + { /* sentinel */ } +}; + +MODULE_DEVICE_TABLE(of, atmel_udc_dt_ids); +#endif + static struct platform_driver udc_driver = { .remove = __exit_p(usba_udc_remove), .driver = { .name = "atmel_usba_udc", .owner = THIS_MODULE, + .of_match_table = of_match_ptr(atmel_udc_dt_ids), }, }; diff --git a/drivers/usb/gadget/atmel_usba_udc.h b/drivers/usb/gadget/atmel_usba_udc.h index 08419867013f..2922db50befe 100644 --- a/drivers/usb/gadget/atmel_usba_udc.h +++ b/drivers/usb/gadget/atmel_usba_udc.h @@ -317,6 +317,7 @@ struct usba_udc { int irq; int vbus_pin; int vbus_pin_inverted; + int num_ep; struct clk *pclk; struct clk *hclk; struct usba_ep *usba_ep; -- cgit v1.2.3 From 530282278bc8ceca122f75c2f1c7f77f28aecc89 Mon Sep 17 00:00:00 2001 From: Rabin Vincent Date: Mon, 21 Jan 2013 13:09:31 +0100 Subject: clocksource: dbx500-prcmu: use relaxed readl variant Modify clksrc_dbx500_prcmu_read to replace readl() with readl_relaxed(). This speeds up calls to the function by about 40%. Signed-off-by: Rabin Vincent Acked-by: Linus Walleij Signed-off-by: Fabio Baltieri Signed-off-by: Linus Walleij --- drivers/clocksource/clksrc-dbx500-prcmu.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) diff --git a/drivers/clocksource/clksrc-dbx500-prcmu.c b/drivers/clocksource/clksrc-dbx500-prcmu.c index 54f3d119d99c..138c5a579550 100644 --- a/drivers/clocksource/clksrc-dbx500-prcmu.c +++ b/drivers/clocksource/clksrc-dbx500-prcmu.c @@ -30,15 +30,14 @@ static void __iomem *clksrc_dbx500_timer_base; -static cycle_t clksrc_dbx500_prcmu_read(struct clocksource *cs) +static cycle_t notrace clksrc_dbx500_prcmu_read(struct clocksource *cs) { + void __iomem *base = clksrc_dbx500_timer_base; u32 count, count2; do { - count = readl(clksrc_dbx500_timer_base + - PRCMU_TIMER_DOWNCOUNT); - count2 = readl(clksrc_dbx500_timer_base + - PRCMU_TIMER_DOWNCOUNT); + count = readl_relaxed(base + PRCMU_TIMER_DOWNCOUNT); + count2 = readl_relaxed(base + PRCMU_TIMER_DOWNCOUNT); } while (count2 != count); /* Negate because the timer is a decrementing counter */ -- cgit v1.2.3 From 807eba55f73e98b76d0afdc197d942c46122bdca Mon Sep 17 00:00:00 2001 From: Fabio Baltieri Date: Mon, 21 Jan 2013 13:09:32 +0100 Subject: clocksource: dbx500-prcmu: comment cleanup Remove references to the deprecated DB5500 platform. Acked-by: Linus Walleij Signed-off-by: Fabio Baltieri Signed-off-by: Linus Walleij --- drivers/clocksource/clksrc-dbx500-prcmu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/clocksource/clksrc-dbx500-prcmu.c b/drivers/clocksource/clksrc-dbx500-prcmu.c index 138c5a579550..77398f8c19a0 100644 --- a/drivers/clocksource/clksrc-dbx500-prcmu.c +++ b/drivers/clocksource/clksrc-dbx500-prcmu.c @@ -10,7 +10,7 @@ * DBx500-PRCMU Timer * The PRCMU has 5 timers which are available in a always-on * power domain. We use the Timer 4 for our always-on clock - * source on DB8500 and Timer 3 on DB5500. + * source on DB8500. */ #include #include -- cgit v1.2.3 From be2dbb09a014cba5691c8483ad2d0747d3eeb514 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Wed, 15 May 2013 10:51:43 +0100 Subject: usb: musb: ux500: move channel number knowledge into the driver For all ux500 based platforms the maximum number of end-points are used. Move this knowledge into the driver so we can relinquish the burden from platform data. This also removes quite a bit of complexity from the driver and will aid us when we come to enable the driver for Device Tree. Cc: linux-usb@vger.kernel.org Acked-by: Felipe Balbi Acked-by: Fabio Baltieri Signed-off-by: Lee Jones Signed-off-by: Linus Walleij --- arch/arm/mach-ux500/usb.c | 14 ++++++------- drivers/usb/musb/ux500_dma.c | 30 +++++++++------------------- include/linux/platform_data/usb-musb-ux500.h | 5 +---- 3 files changed, 16 insertions(+), 33 deletions(-) diff --git a/arch/arm/mach-ux500/usb.c b/arch/arm/mach-ux500/usb.c index 72754e369417..a21c2e1b7333 100644 --- a/arch/arm/mach-ux500/usb.c +++ b/arch/arm/mach-ux500/usb.c @@ -22,7 +22,7 @@ .dir = STEDMA40_MEM_TO_PERIPH, \ } -static struct stedma40_chan_cfg musb_dma_rx_ch[UX500_MUSB_DMA_NUM_RX_CHANNELS] +static struct stedma40_chan_cfg musb_dma_rx_ch[UX500_MUSB_DMA_NUM_RX_TX_CHANNELS] = { MUSB_DMA40_RX_CH, MUSB_DMA40_RX_CH, @@ -34,7 +34,7 @@ static struct stedma40_chan_cfg musb_dma_rx_ch[UX500_MUSB_DMA_NUM_RX_CHANNELS] MUSB_DMA40_RX_CH }; -static struct stedma40_chan_cfg musb_dma_tx_ch[UX500_MUSB_DMA_NUM_TX_CHANNELS] +static struct stedma40_chan_cfg musb_dma_tx_ch[UX500_MUSB_DMA_NUM_RX_TX_CHANNELS] = { MUSB_DMA40_TX_CH, MUSB_DMA40_TX_CH, @@ -46,7 +46,7 @@ static struct stedma40_chan_cfg musb_dma_tx_ch[UX500_MUSB_DMA_NUM_TX_CHANNELS] MUSB_DMA40_TX_CH, }; -static void *ux500_dma_rx_param_array[UX500_MUSB_DMA_NUM_RX_CHANNELS] = { +static void *ux500_dma_rx_param_array[UX500_MUSB_DMA_NUM_RX_TX_CHANNELS] = { &musb_dma_rx_ch[0], &musb_dma_rx_ch[1], &musb_dma_rx_ch[2], @@ -57,7 +57,7 @@ static void *ux500_dma_rx_param_array[UX500_MUSB_DMA_NUM_RX_CHANNELS] = { &musb_dma_rx_ch[7] }; -static void *ux500_dma_tx_param_array[UX500_MUSB_DMA_NUM_TX_CHANNELS] = { +static void *ux500_dma_tx_param_array[UX500_MUSB_DMA_NUM_RX_TX_CHANNELS] = { &musb_dma_tx_ch[0], &musb_dma_tx_ch[1], &musb_dma_tx_ch[2], @@ -71,8 +71,6 @@ static void *ux500_dma_tx_param_array[UX500_MUSB_DMA_NUM_TX_CHANNELS] = { static struct ux500_musb_board_data musb_board_data = { .dma_rx_param_array = ux500_dma_rx_param_array, .dma_tx_param_array = ux500_dma_tx_param_array, - .num_rx_channels = UX500_MUSB_DMA_NUM_RX_CHANNELS, - .num_tx_channels = UX500_MUSB_DMA_NUM_TX_CHANNELS, .dma_filter = stedma40_filter, }; @@ -119,7 +117,7 @@ static inline void ux500_usb_dma_update_rx_ch_config(int *dev_type) { u32 idx; - for (idx = 0; idx < UX500_MUSB_DMA_NUM_RX_CHANNELS; idx++) + for (idx = 0; idx < UX500_MUSB_DMA_NUM_RX_TX_CHANNELS; idx++) musb_dma_rx_ch[idx].dev_type = dev_type[idx]; } @@ -127,7 +125,7 @@ static inline void ux500_usb_dma_update_tx_ch_config(int *dev_type) { u32 idx; - for (idx = 0; idx < UX500_MUSB_DMA_NUM_TX_CHANNELS; idx++) + for (idx = 0; idx < UX500_MUSB_DMA_NUM_RX_TX_CHANNELS; idx++) musb_dma_tx_ch[idx].dev_type = dev_type[idx]; } diff --git a/drivers/usb/musb/ux500_dma.c b/drivers/usb/musb/ux500_dma.c index 338120641145..382291b91f7b 100644 --- a/drivers/usb/musb/ux500_dma.c +++ b/drivers/usb/musb/ux500_dma.c @@ -48,10 +48,8 @@ struct ux500_dma_channel { struct ux500_dma_controller { struct dma_controller controller; - struct ux500_dma_channel rx_channel[UX500_MUSB_DMA_NUM_RX_CHANNELS]; - struct ux500_dma_channel tx_channel[UX500_MUSB_DMA_NUM_TX_CHANNELS]; - u32 num_rx_channels; - u32 num_tx_channels; + struct ux500_dma_channel rx_channel[UX500_MUSB_DMA_NUM_RX_TX_CHANNELS]; + struct ux500_dma_channel tx_channel[UX500_MUSB_DMA_NUM_RX_TX_CHANNELS]; void *private_data; dma_addr_t phy_base; }; @@ -144,19 +142,15 @@ static struct dma_channel *ux500_dma_channel_allocate(struct dma_controller *c, struct ux500_dma_channel *ux500_channel = NULL; struct musb *musb = controller->private_data; u8 ch_num = hw_ep->epnum - 1; - u32 max_ch; - /* Max 8 DMA channels (0 - 7). Each DMA channel can only be allocated + /* 8 DMA channels (0 - 7). Each DMA channel can only be allocated * to specified hw_ep. For example DMA channel 0 can only be allocated * to hw_ep 1 and 9. */ if (ch_num > 7) ch_num -= 8; - max_ch = is_tx ? controller->num_tx_channels : - controller->num_rx_channels; - - if (ch_num >= max_ch) + if (ch_num >= UX500_MUSB_DMA_NUM_RX_TX_CHANNELS) return NULL; ux500_channel = is_tx ? &(controller->tx_channel[ch_num]) : @@ -264,7 +258,7 @@ static int ux500_dma_controller_stop(struct dma_controller *c) struct dma_channel *channel; u8 ch_num; - for (ch_num = 0; ch_num < controller->num_rx_channels; ch_num++) { + for (ch_num = 0; ch_num < UX500_MUSB_DMA_NUM_RX_TX_CHANNELS; ch_num++) { channel = &controller->rx_channel[ch_num].channel; ux500_channel = channel->private_data; @@ -274,7 +268,7 @@ static int ux500_dma_controller_stop(struct dma_controller *c) dma_release_channel(ux500_channel->dma_chan); } - for (ch_num = 0; ch_num < controller->num_tx_channels; ch_num++) { + for (ch_num = 0; ch_num < UX500_MUSB_DMA_NUM_RX_TX_CHANNELS; ch_num++) { channel = &controller->tx_channel[ch_num].channel; ux500_channel = channel->private_data; @@ -303,26 +297,21 @@ static int ux500_dma_controller_start(struct dma_controller *c) void **param_array; struct ux500_dma_channel *channel_array; - u32 ch_count; dma_cap_mask_t mask; - if ((data->num_rx_channels > UX500_MUSB_DMA_NUM_RX_CHANNELS) || - (data->num_tx_channels > UX500_MUSB_DMA_NUM_TX_CHANNELS)) - return -EINVAL; - controller->num_rx_channels = data->num_rx_channels; - controller->num_tx_channels = data->num_tx_channels; dma_cap_zero(mask); dma_cap_set(DMA_SLAVE, mask); /* Prepare the loop for RX channels */ channel_array = controller->rx_channel; - ch_count = data->num_rx_channels; param_array = data->dma_rx_param_array; for (dir = 0; dir < 2; dir++) { - for (ch_num = 0; ch_num < ch_count; ch_num++) { + for (ch_num = 0; + ch_num < UX500_MUSB_DMA_NUM_RX_TX_CHANNELS; + ch_num++) { ux500_channel = &channel_array[ch_num]; ux500_channel->controller = controller; ux500_channel->ch_num = ch_num; @@ -350,7 +339,6 @@ static int ux500_dma_controller_start(struct dma_controller *c) /* Prepare the loop for TX channels */ channel_array = controller->tx_channel; - ch_count = data->num_tx_channels; param_array = data->dma_tx_param_array; is_tx = 1; } diff --git a/include/linux/platform_data/usb-musb-ux500.h b/include/linux/platform_data/usb-musb-ux500.h index 4c1cc50a595a..dd9c83ac7de0 100644 --- a/include/linux/platform_data/usb-musb-ux500.h +++ b/include/linux/platform_data/usb-musb-ux500.h @@ -9,14 +9,11 @@ #include -#define UX500_MUSB_DMA_NUM_RX_CHANNELS 8 -#define UX500_MUSB_DMA_NUM_TX_CHANNELS 8 +#define UX500_MUSB_DMA_NUM_RX_TX_CHANNELS 8 struct ux500_musb_board_data { void **dma_rx_param_array; void **dma_tx_param_array; - u32 num_rx_channels; - u32 num_tx_channels; bool (*dma_filter)(struct dma_chan *chan, void *filter_param); }; -- cgit v1.2.3 From a20b1b791e42d84dedd5854b60abb841ec1a7585 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Wed, 15 May 2013 10:51:44 +0100 Subject: usb: musb: ux500: move the MUSB HDRC configuration into the driver The MUSB HDRC configuration never changes between each of the ux500 supported platforms, so there's little point passing it though platform data. If we set it in the driver instead, we can make good use of it when booting with either ATAGs or Device Tree. Cc: linux-usb@vger.kernel.org Acked-by: Felipe Balbi Acked-by: Fabio Baltieri Signed-off-by: Lee Jones Signed-off-by: Linus Walleij --- arch/arm/mach-ux500/usb.c | 8 -------- drivers/usb/musb/ux500.c | 8 ++++++++ 2 files changed, 8 insertions(+), 8 deletions(-) diff --git a/arch/arm/mach-ux500/usb.c b/arch/arm/mach-ux500/usb.c index a21c2e1b7333..49d6e571f5af 100644 --- a/arch/arm/mach-ux500/usb.c +++ b/arch/arm/mach-ux500/usb.c @@ -76,16 +76,8 @@ static struct ux500_musb_board_data musb_board_data = { static u64 ux500_musb_dmamask = DMA_BIT_MASK(32); -static struct musb_hdrc_config musb_hdrc_config = { - .multipoint = true, - .dyn_fifo = true, - .num_eps = 16, - .ram_bits = 16, -}; - static struct musb_hdrc_platform_data musb_platform_data = { .mode = MUSB_OTG, - .config = &musb_hdrc_config, .board_data = &musb_board_data, }; diff --git a/drivers/usb/musb/ux500.c b/drivers/usb/musb/ux500.c index 2c80004e0a83..371776f76ba2 100644 --- a/drivers/usb/musb/ux500.c +++ b/drivers/usb/musb/ux500.c @@ -30,6 +30,13 @@ #include "musb_core.h" +static struct musb_hdrc_config ux500_musb_hdrc_config = { + .multipoint = true, + .dyn_fifo = true, + .num_eps = 16, + .ram_bits = 16, +}; + struct ux500_glue { struct device *dev; struct platform_device *musb; @@ -229,6 +236,7 @@ static int ux500_probe(struct platform_device *pdev) glue->clk = clk; pdata->platform_ops = &ux500_ops; + pdata->config = &ux500_musb_hdrc_config; platform_set_drvdata(pdev, glue); -- cgit v1.2.3 From 1e6eebb4e907548d53347a6e90769feb3d73e9da Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Wed, 15 May 2013 10:51:45 +0100 Subject: usb: musb: ux500: take the dma_mask from coherent_dma_mask The dma_mask will always be the same as the coherent_dma_mask, so let's cut down on the platform_data burden and set it as such in the driver. This also saves us from supporting it separately when we come to enable this driver for Device Tree. Cc: linux-usb@vger.kernel.org Acked-by: Felipe Balbi Acked-by: Fabio Baltieri Signed-off-by: Lee Jones Signed-off-by: Linus Walleij --- arch/arm/mach-ux500/usb.c | 3 --- drivers/usb/musb/ux500.c | 2 +- 2 files changed, 1 insertion(+), 4 deletions(-) diff --git a/arch/arm/mach-ux500/usb.c b/arch/arm/mach-ux500/usb.c index 49d6e571f5af..2f9abe99dfaa 100644 --- a/arch/arm/mach-ux500/usb.c +++ b/arch/arm/mach-ux500/usb.c @@ -74,8 +74,6 @@ static struct ux500_musb_board_data musb_board_data = { .dma_filter = stedma40_filter, }; -static u64 ux500_musb_dmamask = DMA_BIT_MASK(32); - static struct musb_hdrc_platform_data musb_platform_data = { .mode = MUSB_OTG, .board_data = &musb_board_data, @@ -98,7 +96,6 @@ struct platform_device ux500_musb_device = { .id = 0, .dev = { .platform_data = &musb_platform_data, - .dma_mask = &ux500_musb_dmamask, .coherent_dma_mask = DMA_BIT_MASK(32), }, .num_resources = ARRAY_SIZE(usb_resources), diff --git a/drivers/usb/musb/ux500.c b/drivers/usb/musb/ux500.c index 371776f76ba2..3cf10bcaf118 100644 --- a/drivers/usb/musb/ux500.c +++ b/drivers/usb/musb/ux500.c @@ -228,7 +228,7 @@ static int ux500_probe(struct platform_device *pdev) } musb->dev.parent = &pdev->dev; - musb->dev.dma_mask = pdev->dev.dma_mask; + musb->dev.dma_mask = &pdev->dev.coherent_dma_mask; musb->dev.coherent_dma_mask = pdev->dev.coherent_dma_mask; glue->dev = &pdev->dev; -- cgit v1.2.3 From 5f6091a023ca435c49467348e388fa89e635436a Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Wed, 15 May 2013 10:51:46 +0100 Subject: usb: musb: ux500: harden checks for platform data In its current state, the ux500-musb driver uses platform data pointers blindly with no prior checking. If no platform data pointer is passed this will Oops the kernel. In this patch we ensure platform data and board data are present prior to using them. Cc: linux-usb@vger.kernel.org Acked-by: Felipe Balbi Acked-by: Fabio Baltieri Signed-off-by: Lee Jones Signed-off-by: Linus Walleij --- drivers/usb/musb/ux500_dma.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) diff --git a/drivers/usb/musb/ux500_dma.c b/drivers/usb/musb/ux500_dma.c index 382291b91f7b..4bd5400e0395 100644 --- a/drivers/usb/musb/ux500_dma.c +++ b/drivers/usb/musb/ux500_dma.c @@ -289,7 +289,7 @@ static int ux500_dma_controller_start(struct dma_controller *c) struct musb *musb = controller->private_data; struct device *dev = musb->controller; struct musb_hdrc_platform_data *plat = dev->platform_data; - struct ux500_musb_board_data *data = plat->board_data; + struct ux500_musb_board_data *data; struct dma_channel *dma_channel = NULL; u32 ch_num; u8 dir; @@ -299,14 +299,19 @@ static int ux500_dma_controller_start(struct dma_controller *c) struct ux500_dma_channel *channel_array; dma_cap_mask_t mask; + if (!plat) { + dev_err(musb->controller, "No platform data\n"); + return -EINVAL; + } + data = plat->board_data; dma_cap_zero(mask); dma_cap_set(DMA_SLAVE, mask); /* Prepare the loop for RX channels */ channel_array = controller->rx_channel; - param_array = data->dma_rx_param_array; + param_array = data ? data->dma_rx_param_array : NULL; for (dir = 0; dir < 2; dir++) { for (ch_num = 0; @@ -339,7 +344,7 @@ static int ux500_dma_controller_start(struct dma_controller *c) /* Prepare the loop for TX channels */ channel_array = controller->tx_channel; - param_array = data->dma_tx_param_array; + param_array = data ? data->dma_tx_param_array : NULL; is_tx = 1; } -- cgit v1.2.3 From 2968da0b2c7297a29d49c7084d6865c2cf627093 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Wed, 15 May 2013 10:51:47 +0100 Subject: usb: musb: ux500: attempt to find channels by name before using pdata If we can ever get to a state where we can solely search for DMA channels by name, this will almost completely alleviate the requirement to pass copious amounts of information though platform data. Here we take the first step towards this. The next step will be to enable Device Tree complete with name<->event_line mapping. Cc: linux-usb@vger.kernel.org Acked-by: Felipe Balbi Acked-by: Fabio Baltieri Signed-off-by: Lee Jones Signed-off-by: Linus Walleij --- drivers/usb/musb/ux500_dma.c | 20 +++++++++++++++++--- 1 file changed, 17 insertions(+), 3 deletions(-) diff --git a/drivers/usb/musb/ux500_dma.c b/drivers/usb/musb/ux500_dma.c index 4bd5400e0395..7d80699a5ff7 100644 --- a/drivers/usb/musb/ux500_dma.c +++ b/drivers/usb/musb/ux500_dma.c @@ -34,6 +34,11 @@ #include #include "musb_core.h" +static const char *iep_chan_names[] = { "iep_1_9", "iep_2_10", "iep_3_11", "iep_4_12", + "iep_5_13", "iep_6_14", "iep_7_15", "iep_8" }; +static const char *oep_chan_names[] = { "oep_1_9", "oep_2_10", "oep_3_11", "oep_4_12", + "oep_5_13", "oep_6_14", "oep_7_15", "oep_8" }; + struct ux500_dma_channel { struct dma_channel channel; struct ux500_dma_controller *controller; @@ -291,6 +296,7 @@ static int ux500_dma_controller_start(struct dma_controller *c) struct musb_hdrc_platform_data *plat = dev->platform_data; struct ux500_musb_board_data *data; struct dma_channel *dma_channel = NULL; + char **chan_names; u32 ch_num; u8 dir; u8 is_tx = 0; @@ -312,6 +318,7 @@ static int ux500_dma_controller_start(struct dma_controller *c) /* Prepare the loop for RX channels */ channel_array = controller->rx_channel; param_array = data ? data->dma_rx_param_array : NULL; + chan_names = (char **)iep_chan_names; for (dir = 0; dir < 2; dir++) { for (ch_num = 0; @@ -327,9 +334,15 @@ static int ux500_dma_controller_start(struct dma_controller *c) dma_channel->status = MUSB_DMA_STATUS_FREE; dma_channel->max_len = SZ_16M; - ux500_channel->dma_chan = dma_request_channel(mask, - data->dma_filter, - param_array[ch_num]); + ux500_channel->dma_chan = + dma_request_slave_channel(dev, chan_names[ch_num]); + + if (!ux500_channel->dma_chan) + ux500_channel->dma_chan = + dma_request_channel(mask, + data->dma_filter, + param_array[ch_num]); + if (!ux500_channel->dma_chan) { ERR("Dma pipe allocation error dir=%d ch=%d\n", dir, ch_num); @@ -345,6 +358,7 @@ static int ux500_dma_controller_start(struct dma_controller *c) /* Prepare the loop for TX channels */ channel_array = controller->tx_channel; param_array = data ? data->dma_tx_param_array : NULL; + chan_names = (char **)oep_chan_names; is_tx = 1; } -- cgit v1.2.3 From 313bdb11e52a301aa7f6f8729a87ff0908785163 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Wed, 15 May 2013 10:51:48 +0100 Subject: usb: musb: ux500: add device tree probing support This patch will allow ux500-musb to be probed and configured solely from configuration found in Device Tree. Cc: Rob Herring Cc: linux-usb@vger.kernel.org Cc: devicetree-discuss@lists.ozlabs.org Acked-by: Felipe Balbi Acked-by: Fabio Baltieri Signed-off-by: Lee Jones Signed-off-by: Linus Walleij --- .../devicetree/bindings/usb/ux500-usb.txt | 50 +++++++++++++++++++++ drivers/usb/musb/ux500.c | 51 ++++++++++++++++++++++ 2 files changed, 101 insertions(+) create mode 100644 Documentation/devicetree/bindings/usb/ux500-usb.txt diff --git a/Documentation/devicetree/bindings/usb/ux500-usb.txt b/Documentation/devicetree/bindings/usb/ux500-usb.txt new file mode 100644 index 000000000000..330d6ec15401 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/ux500-usb.txt @@ -0,0 +1,50 @@ +Ux500 MUSB + +Required properties: + - compatible : Should be "stericsson,db8500-musb" + - reg : Offset and length of registers + - interrupts : Interrupt; mode, number and trigger + - dr_mode : Dual-role; either host mode "host", peripheral mode "peripheral" + or both "otg" + +Optional properties: + - dmas : A list of dma channels; + dma-controller, event-line, fixed-channel, flags + - dma-names : An ordered list of channel names affiliated to the above + +Example: + +usb_per5@a03e0000 { + compatible = "stericsson,db8500-musb", "mentor,musb"; + reg = <0xa03e0000 0x10000>; + interrupts = <0 23 0x4>; + interrupt-names = "mc"; + + dr_mode = "otg"; + + dmas = <&dma 38 0 0x2>, /* Logical - DevToMem */ + <&dma 38 0 0x0>, /* Logical - MemToDev */ + <&dma 37 0 0x2>, /* Logical - DevToMem */ + <&dma 37 0 0x0>, /* Logical - MemToDev */ + <&dma 36 0 0x2>, /* Logical - DevToMem */ + <&dma 36 0 0x0>, /* Logical - MemToDev */ + <&dma 19 0 0x2>, /* Logical - DevToMem */ + <&dma 19 0 0x0>, /* Logical - MemToDev */ + <&dma 18 0 0x2>, /* Logical - DevToMem */ + <&dma 18 0 0x0>, /* Logical - MemToDev */ + <&dma 17 0 0x2>, /* Logical - DevToMem */ + <&dma 17 0 0x0>, /* Logical - MemToDev */ + <&dma 16 0 0x2>, /* Logical - DevToMem */ + <&dma 16 0 0x0>, /* Logical - MemToDev */ + <&dma 39 0 0x2>, /* Logical - DevToMem */ + <&dma 39 0 0x0>; /* Logical - MemToDev */ + + dma-names = "iep_1_9", "oep_1_9", + "iep_2_10", "oep_2_10", + "iep_3_11", "oep_3_11", + "iep_4_12", "oep_4_12", + "iep_5_13", "oep_5_13", + "iep_6_14", "oep_6_14", + "iep_7_15", "oep_7_15", + "iep_8", "oep_8"; +}; diff --git a/drivers/usb/musb/ux500.c b/drivers/usb/musb/ux500.c index 3cf10bcaf118..f0beee7b868e 100644 --- a/drivers/usb/musb/ux500.c +++ b/drivers/usb/musb/ux500.c @@ -25,6 +25,7 @@ #include #include #include +#include #include #include @@ -194,14 +195,57 @@ static const struct musb_platform_ops ux500_ops = { .set_vbus = ux500_musb_set_vbus, }; +static struct musb_hdrc_platform_data * +ux500_of_probe(struct platform_device *pdev, struct device_node *np) +{ + struct musb_hdrc_platform_data *pdata; + const char *mode; + int strlen; + + pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL); + if (!pdata) + return NULL; + + mode = of_get_property(np, "dr_mode", &strlen); + if (!mode) { + dev_err(&pdev->dev, "No 'dr_mode' property found\n"); + return NULL; + } + + if (strlen > 0) { + if (!strcmp(mode, "host")) + pdata->mode = MUSB_HOST; + if (!strcmp(mode, "otg")) + pdata->mode = MUSB_OTG; + if (!strcmp(mode, "peripheral")) + pdata->mode = MUSB_PERIPHERAL; + } + + return pdata; +} + static int ux500_probe(struct platform_device *pdev) { struct musb_hdrc_platform_data *pdata = pdev->dev.platform_data; + struct device_node *np = pdev->dev.of_node; struct platform_device *musb; struct ux500_glue *glue; struct clk *clk; int ret = -ENOMEM; + if (!pdata) { + if (np) { + pdata = ux500_of_probe(pdev, np); + if (!pdata) + goto err0; + + pdev->dev.platform_data = pdata; + } else { + dev_err(&pdev->dev, "no pdata or device tree found\n"); + goto err0; + } + } + glue = kzalloc(sizeof(*glue), GFP_KERNEL); if (!glue) { dev_err(&pdev->dev, "failed to allocate glue context\n"); @@ -230,6 +274,7 @@ static int ux500_probe(struct platform_device *pdev) musb->dev.parent = &pdev->dev; musb->dev.dma_mask = &pdev->dev.coherent_dma_mask; musb->dev.coherent_dma_mask = pdev->dev.coherent_dma_mask; + musb->dev.of_node = pdev->dev.of_node; glue->dev = &pdev->dev; glue->musb = musb; @@ -328,12 +373,18 @@ static const struct dev_pm_ops ux500_pm_ops = { #define DEV_PM_OPS NULL #endif +static const struct of_device_id ux500_match[] = { + { .compatible = "stericsson,db8500-musb", }, + {} +}; + static struct platform_driver ux500_driver = { .probe = ux500_probe, .remove = ux500_remove, .driver = { .name = "musb-ux500", .pm = DEV_PM_OPS, + .of_match_table = ux500_match, }, }; -- cgit v1.2.3 From d4999b19d96decc48eb456b0a33be0e6dc5d793b Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Wed, 15 May 2013 10:51:50 +0100 Subject: ARM: ux500: Remove ux500-musb platform registation when booting with DT Now the ux500-musb driver has been enabled for Device Tree, there is no requirement to register it from platform code. Acked-by: Fabio Baltieri Signed-off-by: Lee Jones Signed-off-by: Linus Walleij --- arch/arm/mach-ux500/cpu-db8500.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c index 959a105d2ba7..fbe1fb88b379 100644 --- a/arch/arm/mach-ux500/cpu-db8500.c +++ b/arch/arm/mach-ux500/cpu-db8500.c @@ -223,8 +223,6 @@ static struct device * __init u8500_of_init_devices(void) { struct device *parent = db8500_soc_device_init(); - db8500_add_usb(parent, usb_db8500_dma_cfg, usb_db8500_dma_cfg); - return parent; } -- cgit v1.2.3 From 1e74043a29cdec67279d6e4f494dd1674a1b2365 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Wed, 15 May 2013 10:51:51 +0100 Subject: ARM: ux500: Remove empty function u8500_of_init_devices() As promised, now all devices which resided in u8500_of_init_devices() have been enabled for Device Tree, we can completely remove it. Acked-by: Fabio Baltieri Signed-off-by: Lee Jones Signed-off-by: Linus Walleij --- arch/arm/mach-ux500/cpu-db8500.c | 14 +------------- 1 file changed, 1 insertion(+), 13 deletions(-) diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c index fbe1fb88b379..6e49e4ff6755 100644 --- a/arch/arm/mach-ux500/cpu-db8500.c +++ b/arch/arm/mach-ux500/cpu-db8500.c @@ -217,15 +217,6 @@ struct device * __init u8500_init_devices(struct ab8500_platform_data *ab8500) } #ifdef CONFIG_MACH_UX500_DT - -/* TODO: Once all pieces are DT:ed, remove completely. */ -static struct device * __init u8500_of_init_devices(void) -{ - struct device *parent = db8500_soc_device_init(); - - return parent; -} - static struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = { /* Requires call-back bindings. */ OF_DEV_AUXDATA("arm,cortex-a9-pmu", 0, "arm-pmu", &db8500_pmu_platdata), @@ -284,7 +275,7 @@ static const struct of_device_id u8500_local_bus_nodes[] = { static void __init u8500_init_machine(void) { - struct device *parent = NULL; + struct device *parent = db8500_soc_device_init(); /* Pinmaps must be in place before devices register */ if (of_machine_is_compatible("st-ericsson,mop500")) @@ -297,9 +288,6 @@ static void __init u8500_init_machine(void) else if (of_machine_is_compatible("st-ericsson,ccu9540")) {} /* TODO: Add pinmaps for ccu9540 board. */ - /* TODO: Export SoC, USB, cpu-freq and DMA40 */ - parent = u8500_of_init_devices(); - /* automatically probe child nodes of db8500 device */ of_platform_populate(NULL, u8500_local_bus_nodes, u8500_auxdata_lookup, parent); } -- cgit v1.2.3 From 8a3b6e143c3aa31fab4a820105e91e1cdb17ad42 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Wed, 15 May 2013 10:51:52 +0100 Subject: dmaengine: ste_dma40: Use the BIT macro to replace ugly '(1 << x)'s The aim is to make the code that little more readable. Acked-by: Vinod Koul Acked-by: Arnd Bergmann Signed-off-by: Lee Jones Signed-off-by: Linus Walleij --- drivers/dma/ste_dma40.c | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) diff --git a/drivers/dma/ste_dma40.c b/drivers/dma/ste_dma40.c index 6ed775736853..08bc58ae4ceb 100644 --- a/drivers/dma/ste_dma40.c +++ b/drivers/dma/ste_dma40.c @@ -54,8 +54,8 @@ #define MAX_LCLA_ALLOC_ATTEMPTS 256 /* Bit markings for allocation map */ -#define D40_ALLOC_FREE (1 << 31) -#define D40_ALLOC_PHY (1 << 30) +#define D40_ALLOC_FREE BIT(31) +#define D40_ALLOC_PHY BIT(30) #define D40_ALLOC_LOG_FREE 0 /* Reserved event lines for memcpy only. */ @@ -1738,7 +1738,7 @@ static irqreturn_t d40_handle_interrupt(int irq, void *data) } /* ACK interrupt */ - writel(1 << idx, base->virtbase + il[row].clr); + writel(BIT(idx), base->virtbase + il[row].clr); spin_lock(&d40c->lock); @@ -1828,8 +1828,8 @@ static bool d40_alloc_mask_set(struct d40_phy_res *phy, if (phy->allocated_src == D40_ALLOC_FREE) phy->allocated_src = D40_ALLOC_LOG_FREE; - if (!(phy->allocated_src & (1 << log_event_line))) { - phy->allocated_src |= 1 << log_event_line; + if (!(phy->allocated_src & BIT(log_event_line))) { + phy->allocated_src |= BIT(log_event_line); goto found; } else goto not_found; @@ -1840,8 +1840,8 @@ static bool d40_alloc_mask_set(struct d40_phy_res *phy, if (phy->allocated_dst == D40_ALLOC_FREE) phy->allocated_dst = D40_ALLOC_LOG_FREE; - if (!(phy->allocated_dst & (1 << log_event_line))) { - phy->allocated_dst |= 1 << log_event_line; + if (!(phy->allocated_dst & BIT(log_event_line))) { + phy->allocated_dst |= BIT(log_event_line); goto found; } else goto not_found; @@ -1871,11 +1871,11 @@ static bool d40_alloc_mask_free(struct d40_phy_res *phy, bool is_src, /* Logical channel */ if (is_src) { - phy->allocated_src &= ~(1 << log_event_line); + phy->allocated_src &= ~BIT(log_event_line); if (phy->allocated_src == D40_ALLOC_LOG_FREE) phy->allocated_src = D40_ALLOC_FREE; } else { - phy->allocated_dst &= ~(1 << log_event_line); + phy->allocated_dst &= ~BIT(log_event_line); if (phy->allocated_dst == D40_ALLOC_LOG_FREE) phy->allocated_dst = D40_ALLOC_FREE; } @@ -2356,7 +2356,7 @@ static void __d40_set_prio_rt(struct d40_chan *d40c, int dev_type, bool src) u32 rtreg; u32 event = D40_TYPE_TO_EVENT(dev_type); u32 group = D40_TYPE_TO_GROUP(dev_type); - u32 bit = 1 << event; + u32 bit = BIT(event); u32 prioreg; struct d40_gen_dmac *dmac = &d40c->base->gen_dmac; -- cgit v1.2.3 From 98b68ab5ce2a8d1b98a375f9bed66724222ef9b4 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Wed, 15 May 2013 10:51:53 +0100 Subject: ARM: ux500: Replace ST-E's home-brew DMA direction definition with the generic one STEDMA40_*_TO_* direction definitions are identical in all but name to the pre-defined generic DMA_*_TO_* ones. Let's make things easy by not duplicating such things. Signed-off-by: Lee Jones Signed-off-by: Linus Walleij --- arch/arm/mach-ux500/board-mop500-audio.c | 12 ++++++------ arch/arm/mach-ux500/board-mop500-sdi.c | 16 ++++++++-------- arch/arm/mach-ux500/board-mop500.c | 22 +++++++++++----------- arch/arm/mach-ux500/usb.c | 4 ++-- 4 files changed, 27 insertions(+), 27 deletions(-) diff --git a/arch/arm/mach-ux500/board-mop500-audio.c b/arch/arm/mach-ux500/board-mop500-audio.c index ec872622340f..bfe443daf4b0 100644 --- a/arch/arm/mach-ux500/board-mop500-audio.c +++ b/arch/arm/mach-ux500/board-mop500-audio.c @@ -21,13 +21,13 @@ static struct stedma40_chan_cfg msp0_dma_rx = { .high_priority = true, - .dir = STEDMA40_PERIPH_TO_MEM, + .dir = DMA_DEV_TO_MEM, .dev_type = DB8500_DMA_DEV31_MSP0_SLIM0_CH0, }; static struct stedma40_chan_cfg msp0_dma_tx = { .high_priority = true, - .dir = STEDMA40_MEM_TO_PERIPH, + .dir = DMA_MEM_TO_DEV, .dev_type = DB8500_DMA_DEV31_MSP0_SLIM0_CH0, }; @@ -39,13 +39,13 @@ struct msp_i2s_platform_data msp0_platform_data = { static struct stedma40_chan_cfg msp1_dma_rx = { .high_priority = true, - .dir = STEDMA40_PERIPH_TO_MEM, + .dir = DMA_DEV_TO_MEM, .dev_type = DB8500_DMA_DEV30_MSP3, }; static struct stedma40_chan_cfg msp1_dma_tx = { .high_priority = true, - .dir = STEDMA40_MEM_TO_PERIPH, + .dir = DMA_MEM_TO_DEV, .dev_type = DB8500_DMA_DEV30_MSP1, }; @@ -57,13 +57,13 @@ struct msp_i2s_platform_data msp1_platform_data = { static struct stedma40_chan_cfg msp2_dma_rx = { .high_priority = true, - .dir = STEDMA40_PERIPH_TO_MEM, + .dir = DMA_DEV_TO_MEM, .dev_type = DB8500_DMA_DEV14_MSP2, }; static struct stedma40_chan_cfg msp2_dma_tx = { .high_priority = true, - .dir = STEDMA40_MEM_TO_PERIPH, + .dir = DMA_MEM_TO_DEV, .dev_type = DB8500_DMA_DEV14_MSP2, .use_fixed_channel = true, .phy_channel = 1, diff --git a/arch/arm/mach-ux500/board-mop500-sdi.c b/arch/arm/mach-ux500/board-mop500-sdi.c index 29be714b8a73..e6891d1933fa 100644 --- a/arch/arm/mach-ux500/board-mop500-sdi.c +++ b/arch/arm/mach-ux500/board-mop500-sdi.c @@ -34,13 +34,13 @@ #ifdef CONFIG_STE_DMA40 struct stedma40_chan_cfg mop500_sdi0_dma_cfg_rx = { .mode = STEDMA40_MODE_LOGICAL, - .dir = STEDMA40_PERIPH_TO_MEM, + .dir = DMA_DEV_TO_MEM, .dev_type = DB8500_DMA_DEV29_SD_MM0, }; static struct stedma40_chan_cfg mop500_sdi0_dma_cfg_tx = { .mode = STEDMA40_MODE_LOGICAL, - .dir = STEDMA40_MEM_TO_PERIPH, + .dir = DMA_MEM_TO_DEV, .dev_type = DB8500_DMA_DEV29_SD_MM0, }; #endif @@ -81,13 +81,13 @@ void mop500_sdi_tc35892_init(struct device *parent) #ifdef CONFIG_STE_DMA40 static struct stedma40_chan_cfg sdi1_dma_cfg_rx = { .mode = STEDMA40_MODE_LOGICAL, - .dir = STEDMA40_PERIPH_TO_MEM, + .dir = DMA_DEV_TO_MEM, .dev_type = DB8500_DMA_DEV32_SD_MM1, }; static struct stedma40_chan_cfg sdi1_dma_cfg_tx = { .mode = STEDMA40_MODE_LOGICAL, - .dir = STEDMA40_MEM_TO_PERIPH, + .dir = DMA_MEM_TO_DEV, .dev_type = DB8500_DMA_DEV32_SD_MM1, }; #endif @@ -112,13 +112,13 @@ struct mmci_platform_data mop500_sdi1_data = { #ifdef CONFIG_STE_DMA40 struct stedma40_chan_cfg mop500_sdi2_dma_cfg_rx = { .mode = STEDMA40_MODE_LOGICAL, - .dir = STEDMA40_PERIPH_TO_MEM, + .dir = DMA_DEV_TO_MEM, .dev_type = DB8500_DMA_DEV28_SD_MM2, }; static struct stedma40_chan_cfg mop500_sdi2_dma_cfg_tx = { .mode = STEDMA40_MODE_LOGICAL, - .dir = STEDMA40_MEM_TO_PERIPH, + .dir = DMA_MEM_TO_DEV, .dev_type = DB8500_DMA_DEV28_SD_MM2, }; #endif @@ -144,13 +144,13 @@ struct mmci_platform_data mop500_sdi2_data = { #ifdef CONFIG_STE_DMA40 struct stedma40_chan_cfg mop500_sdi4_dma_cfg_rx = { .mode = STEDMA40_MODE_LOGICAL, - .dir = STEDMA40_PERIPH_TO_MEM, + .dir = DMA_DEV_TO_MEM, .dev_type = DB8500_DMA_DEV42_SD_MM4, }; static struct stedma40_chan_cfg mop500_sdi4_dma_cfg_tx = { .mode = STEDMA40_MODE_LOGICAL, - .dir = STEDMA40_MEM_TO_PERIPH, + .dir = DMA_MEM_TO_DEV, .dev_type = DB8500_DMA_DEV42_SD_MM4, }; #endif diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c index 3507399d8909..fcf06accb66c 100644 --- a/arch/arm/mach-ux500/board-mop500.c +++ b/arch/arm/mach-ux500/board-mop500.c @@ -424,19 +424,19 @@ void mop500_snowball_ethernet_clock_enable(void) static struct cryp_platform_data u8500_cryp1_platform_data = { .mem_to_engine = { - .dir = STEDMA40_MEM_TO_PERIPH, + .dir = DMA_MEM_TO_DEV, .dev_type = DB8500_DMA_DEV48_CAC1, .mode = STEDMA40_MODE_LOGICAL, }, .engine_to_mem = { - .dir = STEDMA40_PERIPH_TO_MEM, + .dir = DMA_DEV_TO_MEM, .dev_type = DB8500_DMA_DEV48_CAC1, .mode = STEDMA40_MODE_LOGICAL, } }; static struct stedma40_chan_cfg u8500_hash_dma_cfg_tx = { - .dir = STEDMA40_MEM_TO_PERIPH, + .dir = DMA_MEM_TO_DEV, .dev_type = DB8500_DMA_DEV50_HAC1_TX, .mode = STEDMA40_MODE_LOGICAL, }; @@ -455,13 +455,13 @@ static struct platform_device *mop500_platform_devs[] __initdata = { #ifdef CONFIG_STE_DMA40 static struct stedma40_chan_cfg ssp0_dma_cfg_rx = { .mode = STEDMA40_MODE_LOGICAL, - .dir = STEDMA40_PERIPH_TO_MEM, + .dir = DMA_DEV_TO_MEM, .dev_type = DB8500_DMA_DEV8_SSP0, }; static struct stedma40_chan_cfg ssp0_dma_cfg_tx = { .mode = STEDMA40_MODE_LOGICAL, - .dir = STEDMA40_MEM_TO_PERIPH, + .dir = DMA_MEM_TO_DEV, .dev_type = DB8500_DMA_DEV8_SSP0, }; #endif @@ -490,37 +490,37 @@ static void __init mop500_spi_init(struct device *parent) #ifdef CONFIG_STE_DMA40 static struct stedma40_chan_cfg uart0_dma_cfg_rx = { .mode = STEDMA40_MODE_LOGICAL, - .dir = STEDMA40_PERIPH_TO_MEM, + .dir = DMA_DEV_TO_MEM, .dev_type = DB8500_DMA_DEV13_UART0, }; static struct stedma40_chan_cfg uart0_dma_cfg_tx = { .mode = STEDMA40_MODE_LOGICAL, - .dir = STEDMA40_MEM_TO_PERIPH, + .dir = DMA_MEM_TO_DEV, .dev_type = DB8500_DMA_DEV13_UART0, }; static struct stedma40_chan_cfg uart1_dma_cfg_rx = { .mode = STEDMA40_MODE_LOGICAL, - .dir = STEDMA40_PERIPH_TO_MEM, + .dir = DMA_DEV_TO_MEM, .dev_type = DB8500_DMA_DEV12_UART1, }; static struct stedma40_chan_cfg uart1_dma_cfg_tx = { .mode = STEDMA40_MODE_LOGICAL, - .dir = STEDMA40_MEM_TO_PERIPH, + .dir = DMA_MEM_TO_DEV, .dev_type = DB8500_DMA_DEV12_UART1, }; static struct stedma40_chan_cfg uart2_dma_cfg_rx = { .mode = STEDMA40_MODE_LOGICAL, - .dir = STEDMA40_PERIPH_TO_MEM, + .dir = DMA_DEV_TO_MEM, .dev_type = DB8500_DMA_DEV11_UART2, }; static struct stedma40_chan_cfg uart2_dma_cfg_tx = { .mode = STEDMA40_MODE_LOGICAL, - .dir = STEDMA40_MEM_TO_PERIPH, + .dir = DMA_MEM_TO_DEV, .dev_type = DB8500_DMA_DEV11_UART2, }; #endif diff --git a/arch/arm/mach-ux500/usb.c b/arch/arm/mach-ux500/usb.c index 2f9abe99dfaa..b7bd8d3a5507 100644 --- a/arch/arm/mach-ux500/usb.c +++ b/arch/arm/mach-ux500/usb.c @@ -14,12 +14,12 @@ #define MUSB_DMA40_RX_CH { \ .mode = STEDMA40_MODE_LOGICAL, \ - .dir = STEDMA40_PERIPH_TO_MEM, \ + .dir = DMA_DEV_TO_MEM, \ } #define MUSB_DMA40_TX_CH { \ .mode = STEDMA40_MODE_LOGICAL, \ - .dir = STEDMA40_MEM_TO_PERIPH, \ + .dir = DMA_MEM_TO_DEV, \ } static struct stedma40_chan_cfg musb_dma_rx_ch[UX500_MUSB_DMA_NUM_RX_TX_CHANNELS] -- cgit v1.2.3 From 2c2b62d5d911da10c0fc37c31458baf4047d531c Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Wed, 15 May 2013 10:51:54 +0100 Subject: dmaengine: ste_dma40: Replace ST-E's home-brew DMA direction defs with generic ones STEDMA40_*_TO_* direction definitions are identical in all but name to the pre-defined generic DMA_*_TO_* ones. Let's make things easy by not duplicating such things. Cc: Dan Williams Cc: Per Forlin Cc: Rabin Vincent Acked-by: Vinod Koul Signed-off-by: Lee Jones Signed-off-by: Linus Walleij --- drivers/dma/ste_dma40.c | 56 +++++++++++++++++++++++----------------------- drivers/dma/ste_dma40_ll.c | 24 ++++++++++---------- 2 files changed, 40 insertions(+), 40 deletions(-) diff --git a/drivers/dma/ste_dma40.c b/drivers/dma/ste_dma40.c index 08bc58ae4ceb..483da1660eae 100644 --- a/drivers/dma/ste_dma40.c +++ b/drivers/dma/ste_dma40.c @@ -78,7 +78,7 @@ static int dma40_memcpy_channels[] = { /* Default configuration for physcial memcpy */ struct stedma40_chan_cfg dma40_memcpy_conf_phy = { .mode = STEDMA40_MODE_PHYSICAL, - .dir = STEDMA40_MEM_TO_MEM, + .dir = DMA_MEM_TO_MEM, .src_info.data_width = STEDMA40_BYTE_WIDTH, .src_info.psize = STEDMA40_PSIZE_PHY_1, @@ -92,7 +92,7 @@ struct stedma40_chan_cfg dma40_memcpy_conf_phy = { /* Default configuration for logical memcpy */ struct stedma40_chan_cfg dma40_memcpy_conf_log = { .mode = STEDMA40_MODE_LOGICAL, - .dir = STEDMA40_MEM_TO_MEM, + .dir = DMA_MEM_TO_MEM, .src_info.data_width = STEDMA40_BYTE_WIDTH, .src_info.psize = STEDMA40_PSIZE_LOG_1, @@ -843,7 +843,7 @@ static void d40_log_lli_to_lcxa(struct d40_chan *chan, struct d40_desc *desc) * that uses linked lists. */ if (!(chan->phy_chan->use_soft_lli && - chan->dma_cfg.dir == STEDMA40_PERIPH_TO_MEM)) + chan->dma_cfg.dir == DMA_DEV_TO_MEM)) curr_lcla = d40_lcla_alloc_one(chan, desc); first_lcla = curr_lcla; @@ -1311,12 +1311,12 @@ static void d40_config_set_event(struct d40_chan *d40c, u32 event = D40_TYPE_TO_EVENT(d40c->dma_cfg.dev_type); /* Enable event line connected to device (or memcpy) */ - if ((d40c->dma_cfg.dir == STEDMA40_PERIPH_TO_MEM) || - (d40c->dma_cfg.dir == STEDMA40_PERIPH_TO_PERIPH)) + if ((d40c->dma_cfg.dir == DMA_DEV_TO_MEM) || + (d40c->dma_cfg.dir == DMA_DEV_TO_DEV)) __d40_config_set_event(d40c, event_type, event, D40_CHAN_REG_SSLNK); - if (d40c->dma_cfg.dir != STEDMA40_PERIPH_TO_MEM) + if (d40c->dma_cfg.dir != DMA_DEV_TO_MEM) __d40_config_set_event(d40c, event_type, event, D40_CHAN_REG_SDLNK); } @@ -1774,7 +1774,7 @@ static int d40_validate_conf(struct d40_chan *d40c, res = -EINVAL; } - if (conf->dir == STEDMA40_PERIPH_TO_PERIPH) { + if (conf->dir == DMA_DEV_TO_DEV) { /* * DMAC HW supports it. Will be added to this driver, * in case any dma client requires it. @@ -1905,11 +1905,11 @@ static int d40_allocate_channel(struct d40_chan *d40c, bool *first_phy_user) phys = d40c->base->phy_res; num_phy_chans = d40c->base->num_phy_chans; - if (d40c->dma_cfg.dir == STEDMA40_PERIPH_TO_MEM) { + if (d40c->dma_cfg.dir == DMA_DEV_TO_MEM) { log_num = 2 * dev_type; is_src = true; - } else if (d40c->dma_cfg.dir == STEDMA40_MEM_TO_PERIPH || - d40c->dma_cfg.dir == STEDMA40_MEM_TO_MEM) { + } else if (d40c->dma_cfg.dir == DMA_MEM_TO_DEV || + d40c->dma_cfg.dir == DMA_MEM_TO_MEM) { /* dst event lines are used for logical memcpy */ log_num = 2 * dev_type + 1; is_src = false; @@ -1920,7 +1920,7 @@ static int d40_allocate_channel(struct d40_chan *d40c, bool *first_phy_user) event_line = D40_TYPE_TO_EVENT(dev_type); if (!is_log) { - if (d40c->dma_cfg.dir == STEDMA40_MEM_TO_MEM) { + if (d40c->dma_cfg.dir == DMA_MEM_TO_MEM) { /* Find physical half channel */ if (d40c->dma_cfg.use_fixed_channel) { i = d40c->dma_cfg.phy_channel; @@ -2068,10 +2068,10 @@ static int d40_free_dma(struct d40_chan *d40c) return -EINVAL; } - if (d40c->dma_cfg.dir == STEDMA40_MEM_TO_PERIPH || - d40c->dma_cfg.dir == STEDMA40_MEM_TO_MEM) + if (d40c->dma_cfg.dir == DMA_MEM_TO_DEV || + d40c->dma_cfg.dir == DMA_MEM_TO_MEM) is_src = false; - else if (d40c->dma_cfg.dir == STEDMA40_PERIPH_TO_MEM) + else if (d40c->dma_cfg.dir == DMA_DEV_TO_MEM) is_src = true; else { chan_err(d40c, "Unknown direction\n"); @@ -2133,10 +2133,10 @@ static bool d40_is_paused(struct d40_chan *d40c) goto _exit; } - if (d40c->dma_cfg.dir == STEDMA40_MEM_TO_PERIPH || - d40c->dma_cfg.dir == STEDMA40_MEM_TO_MEM) { + if (d40c->dma_cfg.dir == DMA_MEM_TO_DEV || + d40c->dma_cfg.dir == DMA_MEM_TO_MEM) { status = readl(chanbase + D40_CHAN_REG_SDLNK); - } else if (d40c->dma_cfg.dir == STEDMA40_PERIPH_TO_MEM) { + } else if (d40c->dma_cfg.dir == DMA_DEV_TO_MEM) { status = readl(chanbase + D40_CHAN_REG_SSLNK); } else { chan_err(d40c, "Unknown direction\n"); @@ -2387,12 +2387,12 @@ static void d40_set_prio_realtime(struct d40_chan *d40c) if (d40c->base->rev < 3) return; - if ((d40c->dma_cfg.dir == STEDMA40_PERIPH_TO_MEM) || - (d40c->dma_cfg.dir == STEDMA40_PERIPH_TO_PERIPH)) + if ((d40c->dma_cfg.dir == DMA_DEV_TO_MEM) || + (d40c->dma_cfg.dir == DMA_DEV_TO_DEV)) __d40_set_prio_rt(d40c, d40c->dma_cfg.dev_type, true); - if ((d40c->dma_cfg.dir == STEDMA40_MEM_TO_PERIPH) || - (d40c->dma_cfg.dir == STEDMA40_PERIPH_TO_PERIPH)) + if ((d40c->dma_cfg.dir == DMA_MEM_TO_DEV) || + (d40c->dma_cfg.dir == DMA_DEV_TO_DEV)) __d40_set_prio_rt(d40c, d40c->dma_cfg.dev_type, false); } @@ -2423,11 +2423,11 @@ static struct dma_chan *d40_xlate(struct of_phandle_args *dma_spec, switch (D40_DT_FLAGS_DIR(flags)) { case 0: - cfg.dir = STEDMA40_MEM_TO_PERIPH; + cfg.dir = DMA_MEM_TO_DEV; cfg.dst_info.big_endian = D40_DT_FLAGS_BIG_ENDIAN(flags); break; case 1: - cfg.dir = STEDMA40_PERIPH_TO_MEM; + cfg.dir = DMA_DEV_TO_MEM; cfg.src_info.big_endian = D40_DT_FLAGS_BIG_ENDIAN(flags); break; } @@ -2473,7 +2473,7 @@ static int d40_alloc_chan_resources(struct dma_chan *chan) d40_set_prio_realtime(d40c); if (chan_is_logical(d40c)) { - if (d40c->dma_cfg.dir == STEDMA40_PERIPH_TO_MEM) + if (d40c->dma_cfg.dir == DMA_DEV_TO_MEM) d40c->lcpa = d40c->base->lcpa_base + d40c->dma_cfg.dev_type * D40_LCPA_CHAN_SIZE; else @@ -2746,12 +2746,12 @@ static int d40_set_runtime_config(struct dma_chan *chan, if (config->direction == DMA_DEV_TO_MEM) { config_addr = config->src_addr; - if (cfg->dir != STEDMA40_PERIPH_TO_MEM) + if (cfg->dir != DMA_DEV_TO_MEM) dev_dbg(d40c->base->dev, "channel was not configured for peripheral " "to memory transfer (%d) overriding\n", cfg->dir); - cfg->dir = STEDMA40_PERIPH_TO_MEM; + cfg->dir = DMA_DEV_TO_MEM; /* Configure the memory side */ if (dst_addr_width == DMA_SLAVE_BUSWIDTH_UNDEFINED) @@ -2762,12 +2762,12 @@ static int d40_set_runtime_config(struct dma_chan *chan, } else if (config->direction == DMA_MEM_TO_DEV) { config_addr = config->dst_addr; - if (cfg->dir != STEDMA40_MEM_TO_PERIPH) + if (cfg->dir != DMA_MEM_TO_DEV) dev_dbg(d40c->base->dev, "channel was not configured for memory " "to peripheral transfer (%d) overriding\n", cfg->dir); - cfg->dir = STEDMA40_MEM_TO_PERIPH; + cfg->dir = DMA_MEM_TO_DEV; /* Configure the memory side */ if (src_addr_width == DMA_SLAVE_BUSWIDTH_UNDEFINED) diff --git a/drivers/dma/ste_dma40_ll.c b/drivers/dma/ste_dma40_ll.c index ab5a2a706f7a..121c0cec4614 100644 --- a/drivers/dma/ste_dma40_ll.c +++ b/drivers/dma/ste_dma40_ll.c @@ -18,23 +18,23 @@ void d40_log_cfg(struct stedma40_chan_cfg *cfg, u32 l1 = 0; /* src */ /* src is mem? -> increase address pos */ - if (cfg->dir == STEDMA40_MEM_TO_PERIPH || - cfg->dir == STEDMA40_MEM_TO_MEM) + if (cfg->dir == DMA_MEM_TO_DEV || + cfg->dir == DMA_MEM_TO_MEM) l1 |= 1 << D40_MEM_LCSP1_SCFG_INCR_POS; /* dst is mem? -> increase address pos */ - if (cfg->dir == STEDMA40_PERIPH_TO_MEM || - cfg->dir == STEDMA40_MEM_TO_MEM) + if (cfg->dir == DMA_DEV_TO_MEM || + cfg->dir == DMA_MEM_TO_MEM) l3 |= 1 << D40_MEM_LCSP3_DCFG_INCR_POS; /* src is hw? -> master port 1 */ - if (cfg->dir == STEDMA40_PERIPH_TO_MEM || - cfg->dir == STEDMA40_PERIPH_TO_PERIPH) + if (cfg->dir == DMA_DEV_TO_MEM || + cfg->dir == DMA_DEV_TO_DEV) l1 |= 1 << D40_MEM_LCSP1_SCFG_MST_POS; /* dst is hw? -> master port 1 */ - if (cfg->dir == STEDMA40_MEM_TO_PERIPH || - cfg->dir == STEDMA40_PERIPH_TO_PERIPH) + if (cfg->dir == DMA_MEM_TO_DEV || + cfg->dir == DMA_DEV_TO_DEV) l3 |= 1 << D40_MEM_LCSP3_DCFG_MST_POS; l3 |= 1 << D40_MEM_LCSP3_DCFG_EIM_POS; @@ -55,8 +55,8 @@ void d40_phy_cfg(struct stedma40_chan_cfg *cfg, u32 *src_cfg, u32 *dst_cfg) u32 src = 0; u32 dst = 0; - if ((cfg->dir == STEDMA40_PERIPH_TO_MEM) || - (cfg->dir == STEDMA40_PERIPH_TO_PERIPH)) { + if ((cfg->dir == DMA_DEV_TO_MEM) || + (cfg->dir == DMA_DEV_TO_DEV)) { /* Set master port to 1 */ src |= 1 << D40_SREG_CFG_MST_POS; src |= D40_TYPE_TO_EVENT(cfg->dev_type); @@ -66,8 +66,8 @@ void d40_phy_cfg(struct stedma40_chan_cfg *cfg, u32 *src_cfg, u32 *dst_cfg) else src |= 3 << D40_SREG_CFG_PHY_TM_POS; } - if ((cfg->dir == STEDMA40_MEM_TO_PERIPH) || - (cfg->dir == STEDMA40_PERIPH_TO_PERIPH)) { + if ((cfg->dir == DMA_MEM_TO_DEV) || + (cfg->dir == DMA_DEV_TO_DEV)) { /* Set master port to 1 */ dst |= 1 << D40_SREG_CFG_MST_POS; dst |= D40_TYPE_TO_EVENT(cfg->dev_type); -- cgit v1.2.3 From e7bab58b73a653d4c226b11ead07fd30ffaea914 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Wed, 15 May 2013 10:51:55 +0100 Subject: ARM: ux500: Remove recently unused stedma40_xfer_dir enums We're now using the transfer direction definitions provided by the DMA sub-system, so the home-brew ones have become obsolete. Signed-off-by: Lee Jones Signed-off-by: Linus Walleij --- include/linux/platform_data/dma-ste-dma40.h | 10 +--------- 1 file changed, 1 insertion(+), 9 deletions(-) diff --git a/include/linux/platform_data/dma-ste-dma40.h b/include/linux/platform_data/dma-ste-dma40.h index 288dc2420ee6..54ddca615cb4 100644 --- a/include/linux/platform_data/dma-ste-dma40.h +++ b/include/linux/platform_data/dma-ste-dma40.h @@ -77,14 +77,6 @@ enum stedma40_periph_data_width { STEDMA40_DOUBLEWORD_WIDTH = STEDMA40_ESIZE_64_BIT }; -enum stedma40_xfer_dir { - STEDMA40_MEM_TO_MEM = 1, - STEDMA40_MEM_TO_PERIPH, - STEDMA40_PERIPH_TO_MEM, - STEDMA40_PERIPH_TO_PERIPH -}; - - /** * struct stedma40_half_channel_info - dst/src channel configuration * @@ -120,7 +112,7 @@ struct stedma40_half_channel_info { * */ struct stedma40_chan_cfg { - enum stedma40_xfer_dir dir; + enum dma_transfer_direction dir; bool high_priority; bool realtime; enum stedma40_mode mode; -- cgit v1.2.3 From 16db3411ebd4777b0b1b7207b10730b726fb751c Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Wed, 15 May 2013 10:51:56 +0100 Subject: dmaengine: ste_dma40_ll: Use the BIT macro to replace ugly '(1 << x)'s The aim is to make the code that little more readable. Cc: Dan Williams Cc: Per Forlin Cc: Rabin Vincent Acked-by: Vinod Koul Signed-off-by: Lee Jones Signed-off-by: Linus Walleij --- drivers/dma/ste_dma40_ll.c | 44 ++++++++++++++++++++++---------------------- 1 file changed, 22 insertions(+), 22 deletions(-) diff --git a/drivers/dma/ste_dma40_ll.c b/drivers/dma/ste_dma40_ll.c index 121c0cec4614..5ddd724dcdc5 100644 --- a/drivers/dma/ste_dma40_ll.c +++ b/drivers/dma/ste_dma40_ll.c @@ -20,28 +20,28 @@ void d40_log_cfg(struct stedma40_chan_cfg *cfg, /* src is mem? -> increase address pos */ if (cfg->dir == DMA_MEM_TO_DEV || cfg->dir == DMA_MEM_TO_MEM) - l1 |= 1 << D40_MEM_LCSP1_SCFG_INCR_POS; + l1 |= BIT(D40_MEM_LCSP1_SCFG_INCR_POS); /* dst is mem? -> increase address pos */ if (cfg->dir == DMA_DEV_TO_MEM || cfg->dir == DMA_MEM_TO_MEM) - l3 |= 1 << D40_MEM_LCSP3_DCFG_INCR_POS; + l3 |= BIT(D40_MEM_LCSP3_DCFG_INCR_POS); /* src is hw? -> master port 1 */ if (cfg->dir == DMA_DEV_TO_MEM || cfg->dir == DMA_DEV_TO_DEV) - l1 |= 1 << D40_MEM_LCSP1_SCFG_MST_POS; + l1 |= BIT(D40_MEM_LCSP1_SCFG_MST_POS); /* dst is hw? -> master port 1 */ if (cfg->dir == DMA_MEM_TO_DEV || cfg->dir == DMA_DEV_TO_DEV) - l3 |= 1 << D40_MEM_LCSP3_DCFG_MST_POS; + l3 |= BIT(D40_MEM_LCSP3_DCFG_MST_POS); - l3 |= 1 << D40_MEM_LCSP3_DCFG_EIM_POS; + l3 |= BIT(D40_MEM_LCSP3_DCFG_EIM_POS); l3 |= cfg->dst_info.psize << D40_MEM_LCSP3_DCFG_PSIZE_POS; l3 |= cfg->dst_info.data_width << D40_MEM_LCSP3_DCFG_ESIZE_POS; - l1 |= 1 << D40_MEM_LCSP1_SCFG_EIM_POS; + l1 |= BIT(D40_MEM_LCSP1_SCFG_EIM_POS); l1 |= cfg->src_info.psize << D40_MEM_LCSP1_SCFG_PSIZE_POS; l1 |= cfg->src_info.data_width << D40_MEM_LCSP1_SCFG_ESIZE_POS; @@ -58,39 +58,39 @@ void d40_phy_cfg(struct stedma40_chan_cfg *cfg, u32 *src_cfg, u32 *dst_cfg) if ((cfg->dir == DMA_DEV_TO_MEM) || (cfg->dir == DMA_DEV_TO_DEV)) { /* Set master port to 1 */ - src |= 1 << D40_SREG_CFG_MST_POS; + src |= BIT(D40_SREG_CFG_MST_POS); src |= D40_TYPE_TO_EVENT(cfg->dev_type); if (cfg->src_info.flow_ctrl == STEDMA40_NO_FLOW_CTRL) - src |= 1 << D40_SREG_CFG_PHY_TM_POS; + src |= BIT(D40_SREG_CFG_PHY_TM_POS); else src |= 3 << D40_SREG_CFG_PHY_TM_POS; } if ((cfg->dir == DMA_MEM_TO_DEV) || (cfg->dir == DMA_DEV_TO_DEV)) { /* Set master port to 1 */ - dst |= 1 << D40_SREG_CFG_MST_POS; + dst |= BIT(D40_SREG_CFG_MST_POS); dst |= D40_TYPE_TO_EVENT(cfg->dev_type); if (cfg->dst_info.flow_ctrl == STEDMA40_NO_FLOW_CTRL) - dst |= 1 << D40_SREG_CFG_PHY_TM_POS; + dst |= BIT(D40_SREG_CFG_PHY_TM_POS); else dst |= 3 << D40_SREG_CFG_PHY_TM_POS; } /* Interrupt on end of transfer for destination */ - dst |= 1 << D40_SREG_CFG_TIM_POS; + dst |= BIT(D40_SREG_CFG_TIM_POS); /* Generate interrupt on error */ - src |= 1 << D40_SREG_CFG_EIM_POS; - dst |= 1 << D40_SREG_CFG_EIM_POS; + src |= BIT(D40_SREG_CFG_EIM_POS); + dst |= BIT(D40_SREG_CFG_EIM_POS); /* PSIZE */ if (cfg->src_info.psize != STEDMA40_PSIZE_PHY_1) { - src |= 1 << D40_SREG_CFG_PHY_PEN_POS; + src |= BIT(D40_SREG_CFG_PHY_PEN_POS); src |= cfg->src_info.psize << D40_SREG_CFG_PSIZE_POS; } if (cfg->dst_info.psize != STEDMA40_PSIZE_PHY_1) { - dst |= 1 << D40_SREG_CFG_PHY_PEN_POS; + dst |= BIT(D40_SREG_CFG_PHY_PEN_POS); dst |= cfg->dst_info.psize << D40_SREG_CFG_PSIZE_POS; } @@ -100,14 +100,14 @@ void d40_phy_cfg(struct stedma40_chan_cfg *cfg, u32 *src_cfg, u32 *dst_cfg) /* Set the priority bit to high for the physical channel */ if (cfg->high_priority) { - src |= 1 << D40_SREG_CFG_PRI_POS; - dst |= 1 << D40_SREG_CFG_PRI_POS; + src |= BIT(D40_SREG_CFG_PRI_POS); + dst |= BIT(D40_SREG_CFG_PRI_POS); } if (cfg->src_info.big_endian) - src |= 1 << D40_SREG_CFG_LBE_POS; + src |= BIT(D40_SREG_CFG_LBE_POS); if (cfg->dst_info.big_endian) - dst |= 1 << D40_SREG_CFG_LBE_POS; + dst |= BIT(D40_SREG_CFG_LBE_POS); *src_cfg = src; *dst_cfg = dst; @@ -157,15 +157,15 @@ static int d40_phy_fill_lli(struct d40_phy_lli *lli, /* If this scatter list entry is the last one, no next link */ if (next_lli == 0) - lli->reg_lnk = 0x1 << D40_SREG_LNK_PHY_TCP_POS; + lli->reg_lnk = BIT(D40_SREG_LNK_PHY_TCP_POS); else lli->reg_lnk = next_lli; /* Set/clear interrupt generation on this link item.*/ if (term_int) - lli->reg_cfg |= 0x1 << D40_SREG_CFG_TIM_POS; + lli->reg_cfg |= BIT(D40_SREG_CFG_TIM_POS); else - lli->reg_cfg &= ~(0x1 << D40_SREG_CFG_TIM_POS); + lli->reg_cfg &= ~BIT(D40_SREG_CFG_TIM_POS); /* Post link */ lli->reg_lnk |= 0 << D40_SREG_LNK_PHY_PRE_POS; -- cgit v1.2.3 From 43f2e1a3be5d83004f09bcb53c46f273e7473a00 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Wed, 15 May 2013 11:51:57 +0200 Subject: dmaengine: ste_dma40: Convert data_width from register bit format to value When a DMA client requests and configures a DMA channel, it requests data_width in Bytes. The DMA40 driver then swiftly converts it over to the necessary register bit value. Unfortunately, for any subsequent calculations we have to shift '1' by the bit pattern (1 << data_width) times to make any sense of it. This patch flips the semantics on its head and only converts the value to its respective register bit pattern when writing to registers. This way we can use the true data_width (in Bytes) value. Cc: Dan Williams Cc: Per Forlin Cc: Rabin Vincent Acked-by: Vinod Koul Signed-off-by: Lee Jones Signed-off-by: Linus Walleij --- drivers/dma/ste_dma40.c | 63 ++++++++++++----------------- drivers/dma/ste_dma40_ll.c | 43 +++++++++++++------- include/linux/platform_data/dma-ste-dma40.h | 9 +---- sound/soc/ux500/ux500_pcm.c | 10 ++--- 4 files changed, 60 insertions(+), 65 deletions(-) diff --git a/drivers/dma/ste_dma40.c b/drivers/dma/ste_dma40.c index 483da1660eae..76c255fcdc2d 100644 --- a/drivers/dma/ste_dma40.c +++ b/drivers/dma/ste_dma40.c @@ -80,11 +80,11 @@ struct stedma40_chan_cfg dma40_memcpy_conf_phy = { .mode = STEDMA40_MODE_PHYSICAL, .dir = DMA_MEM_TO_MEM, - .src_info.data_width = STEDMA40_BYTE_WIDTH, + .src_info.data_width = DMA_SLAVE_BUSWIDTH_1_BYTE, .src_info.psize = STEDMA40_PSIZE_PHY_1, .src_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL, - .dst_info.data_width = STEDMA40_BYTE_WIDTH, + .dst_info.data_width = DMA_SLAVE_BUSWIDTH_1_BYTE, .dst_info.psize = STEDMA40_PSIZE_PHY_1, .dst_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL, }; @@ -94,11 +94,11 @@ struct stedma40_chan_cfg dma40_memcpy_conf_log = { .mode = STEDMA40_MODE_LOGICAL, .dir = DMA_MEM_TO_MEM, - .src_info.data_width = STEDMA40_BYTE_WIDTH, + .src_info.data_width = DMA_SLAVE_BUSWIDTH_1_BYTE, .src_info.psize = STEDMA40_PSIZE_LOG_1, .src_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL, - .dst_info.data_width = STEDMA40_BYTE_WIDTH, + .dst_info.data_width = DMA_SLAVE_BUSWIDTH_1_BYTE, .dst_info.psize = STEDMA40_PSIZE_LOG_1, .dst_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL, }; @@ -1005,20 +1005,21 @@ static int d40_psize_2_burst_size(bool is_log, int psize) /* * The dma only supports transmitting packages up to - * STEDMA40_MAX_SEG_SIZE << data_width. Calculate the total number of - * dma elements required to send the entire sg list + * STEDMA40_MAX_SEG_SIZE * data_width, where data_width is stored in Bytes. + * + * Calculate the total number of dma elements required to send the entire sg list. */ static int d40_size_2_dmalen(int size, u32 data_width1, u32 data_width2) { int dmalen; u32 max_w = max(data_width1, data_width2); u32 min_w = min(data_width1, data_width2); - u32 seg_max = ALIGN(STEDMA40_MAX_SEG_SIZE << min_w, 1 << max_w); + u32 seg_max = ALIGN(STEDMA40_MAX_SEG_SIZE * min_w, max_w); if (seg_max > STEDMA40_MAX_SEG_SIZE) - seg_max -= (1 << max_w); + seg_max -= max_w; - if (!IS_ALIGNED(size, 1 << max_w)) + if (!IS_ALIGNED(size, max_w)) return -EINVAL; if (size <= seg_max) @@ -1464,7 +1465,7 @@ static u32 d40_residue(struct d40_chan *d40c) >> D40_SREG_ELEM_PHY_ECNT_POS; } - return num_elt * (1 << d40c->dma_cfg.dst_info.data_width); + return num_elt * d40c->dma_cfg.dst_info.data_width; } static bool d40_tx_is_linked(struct d40_chan *d40c) @@ -1784,9 +1785,9 @@ static int d40_validate_conf(struct d40_chan *d40c, } if (d40_psize_2_burst_size(is_log, conf->src_info.psize) * - (1 << conf->src_info.data_width) != + conf->src_info.data_width != d40_psize_2_burst_size(is_log, conf->dst_info.psize) * - (1 << conf->dst_info.data_width)) { + conf->dst_info.data_width) { /* * The DMAC hardware only supports * src (burst x width) == dst (burst x width) @@ -2673,33 +2674,10 @@ static void d40_terminate_all(struct dma_chan *chan) static int dma40_config_to_halfchannel(struct d40_chan *d40c, struct stedma40_half_channel_info *info, - enum dma_slave_buswidth width, u32 maxburst) { - enum stedma40_periph_data_width addr_width; int psize; - switch (width) { - case DMA_SLAVE_BUSWIDTH_1_BYTE: - addr_width = STEDMA40_BYTE_WIDTH; - break; - case DMA_SLAVE_BUSWIDTH_2_BYTES: - addr_width = STEDMA40_HALFWORD_WIDTH; - break; - case DMA_SLAVE_BUSWIDTH_4_BYTES: - addr_width = STEDMA40_WORD_WIDTH; - break; - case DMA_SLAVE_BUSWIDTH_8_BYTES: - addr_width = STEDMA40_DOUBLEWORD_WIDTH; - break; - default: - dev_err(d40c->base->dev, - "illegal peripheral address width " - "requested (%d)\n", - width); - return -EINVAL; - } - if (chan_is_logical(d40c)) { if (maxburst >= 16) psize = STEDMA40_PSIZE_LOG_16; @@ -2720,7 +2698,6 @@ dma40_config_to_halfchannel(struct d40_chan *d40c, psize = STEDMA40_PSIZE_PHY_1; } - info->data_width = addr_width; info->psize = psize; info->flow_ctrl = STEDMA40_NO_FLOW_CTRL; @@ -2804,14 +2781,24 @@ static int d40_set_runtime_config(struct dma_chan *chan, src_maxburst = dst_maxburst * dst_addr_width / src_addr_width; } + /* Only valid widths are; 1, 2, 4 and 8. */ + if (src_addr_width <= DMA_SLAVE_BUSWIDTH_UNDEFINED || + src_addr_width > DMA_SLAVE_BUSWIDTH_8_BYTES || + dst_addr_width <= DMA_SLAVE_BUSWIDTH_UNDEFINED || + dst_addr_width > DMA_SLAVE_BUSWIDTH_8_BYTES || + ((src_addr_width > 1) && (src_addr_width & 1)) || + ((dst_addr_width > 1) && (dst_addr_width & 1))) + return -EINVAL; + + cfg->src_info.data_width = src_addr_width; + cfg->dst_info.data_width = dst_addr_width; + ret = dma40_config_to_halfchannel(d40c, &cfg->src_info, - src_addr_width, src_maxburst); if (ret) return ret; ret = dma40_config_to_halfchannel(d40c, &cfg->dst_info, - dst_addr_width, dst_maxburst); if (ret) return ret; diff --git a/drivers/dma/ste_dma40_ll.c b/drivers/dma/ste_dma40_ll.c index 5ddd724dcdc5..a035dfeab6cb 100644 --- a/drivers/dma/ste_dma40_ll.c +++ b/drivers/dma/ste_dma40_ll.c @@ -10,6 +10,18 @@ #include "ste_dma40_ll.h" +u8 d40_width_to_bits(enum dma_slave_buswidth width) +{ + if (width == DMA_SLAVE_BUSWIDTH_1_BYTE) + return STEDMA40_ESIZE_8_BIT; + else if (width == DMA_SLAVE_BUSWIDTH_2_BYTES) + return STEDMA40_ESIZE_16_BIT; + else if (width == DMA_SLAVE_BUSWIDTH_8_BYTES) + return STEDMA40_ESIZE_64_BIT; + else + return STEDMA40_ESIZE_32_BIT; +} + /* Sets up proper LCSP1 and LCSP3 register for a logical channel */ void d40_log_cfg(struct stedma40_chan_cfg *cfg, u32 *lcsp1, u32 *lcsp3) @@ -39,11 +51,13 @@ void d40_log_cfg(struct stedma40_chan_cfg *cfg, l3 |= BIT(D40_MEM_LCSP3_DCFG_EIM_POS); l3 |= cfg->dst_info.psize << D40_MEM_LCSP3_DCFG_PSIZE_POS; - l3 |= cfg->dst_info.data_width << D40_MEM_LCSP3_DCFG_ESIZE_POS; + l3 |= d40_width_to_bits(cfg->dst_info.data_width) + << D40_MEM_LCSP3_DCFG_ESIZE_POS; l1 |= BIT(D40_MEM_LCSP1_SCFG_EIM_POS); l1 |= cfg->src_info.psize << D40_MEM_LCSP1_SCFG_PSIZE_POS; - l1 |= cfg->src_info.data_width << D40_MEM_LCSP1_SCFG_ESIZE_POS; + l1 |= d40_width_to_bits(cfg->src_info.data_width) + << D40_MEM_LCSP1_SCFG_ESIZE_POS; *lcsp1 = l1; *lcsp3 = l3; @@ -95,8 +109,10 @@ void d40_phy_cfg(struct stedma40_chan_cfg *cfg, u32 *src_cfg, u32 *dst_cfg) } /* Element size */ - src |= cfg->src_info.data_width << D40_SREG_CFG_ESIZE_POS; - dst |= cfg->dst_info.data_width << D40_SREG_CFG_ESIZE_POS; + src |= d40_width_to_bits(cfg->src_info.data_width) + << D40_SREG_CFG_ESIZE_POS; + dst |= d40_width_to_bits(cfg->dst_info.data_width) + << D40_SREG_CFG_ESIZE_POS; /* Set the priority bit to high for the physical channel */ if (cfg->high_priority) { @@ -133,23 +149,22 @@ static int d40_phy_fill_lli(struct d40_phy_lli *lli, num_elems = 2 << psize; /* Must be aligned */ - if (!IS_ALIGNED(data, 0x1 << data_width)) + if (!IS_ALIGNED(data, data_width)) return -EINVAL; /* Transfer size can't be smaller than (num_elms * elem_size) */ - if (data_size < num_elems * (0x1 << data_width)) + if (data_size < num_elems * data_width) return -EINVAL; /* The number of elements. IE now many chunks */ - lli->reg_elt = (data_size >> data_width) << D40_SREG_ELEM_PHY_ECNT_POS; + lli->reg_elt = (data_size / data_width) << D40_SREG_ELEM_PHY_ECNT_POS; /* * Distance to next element sized entry. * Usually the size of the element unless you want gaps. */ if (addr_inc) - lli->reg_elt |= (0x1 << data_width) << - D40_SREG_ELEM_PHY_EIDX_POS; + lli->reg_elt |= data_width << D40_SREG_ELEM_PHY_EIDX_POS; /* Where the data is */ lli->reg_ptr = data; @@ -177,16 +192,16 @@ static int d40_seg_size(int size, int data_width1, int data_width2) { u32 max_w = max(data_width1, data_width2); u32 min_w = min(data_width1, data_width2); - u32 seg_max = ALIGN(STEDMA40_MAX_SEG_SIZE << min_w, 1 << max_w); + u32 seg_max = ALIGN(STEDMA40_MAX_SEG_SIZE * min_w, max_w); if (seg_max > STEDMA40_MAX_SEG_SIZE) - seg_max -= (1 << max_w); + seg_max -= max_w; if (size <= seg_max) return size; if (size <= 2 * seg_max) - return ALIGN(size / 2, 1 << max_w); + return ALIGN(size / 2, max_w); return seg_max; } @@ -352,10 +367,10 @@ static void d40_log_fill_lli(struct d40_log_lli *lli, lli->lcsp13 = reg_cfg; /* The number of elements to transfer */ - lli->lcsp02 = ((data_size >> data_width) << + lli->lcsp02 = ((data_size / data_width) << D40_MEM_LCSP0_ECNT_POS) & D40_MEM_LCSP0_ECNT_MASK; - BUG_ON((data_size >> data_width) > STEDMA40_MAX_SEG_SIZE); + BUG_ON((data_size / data_width) > STEDMA40_MAX_SEG_SIZE); /* 16 LSBs address of the current element */ lli->lcsp02 |= data & D40_MEM_LCSP0_SPTR_MASK; diff --git a/include/linux/platform_data/dma-ste-dma40.h b/include/linux/platform_data/dma-ste-dma40.h index 54ddca615cb4..ceba6dc566a9 100644 --- a/include/linux/platform_data/dma-ste-dma40.h +++ b/include/linux/platform_data/dma-ste-dma40.h @@ -70,13 +70,6 @@ enum stedma40_flow_ctrl { STEDMA40_FLOW_CTRL, }; -enum stedma40_periph_data_width { - STEDMA40_BYTE_WIDTH = STEDMA40_ESIZE_8_BIT, - STEDMA40_HALFWORD_WIDTH = STEDMA40_ESIZE_16_BIT, - STEDMA40_WORD_WIDTH = STEDMA40_ESIZE_32_BIT, - STEDMA40_DOUBLEWORD_WIDTH = STEDMA40_ESIZE_64_BIT -}; - /** * struct stedma40_half_channel_info - dst/src channel configuration * @@ -87,7 +80,7 @@ enum stedma40_periph_data_width { */ struct stedma40_half_channel_info { bool big_endian; - enum stedma40_periph_data_width data_width; + enum dma_slave_buswidth data_width; int psize; enum stedma40_flow_ctrl flow_ctrl; }; diff --git a/sound/soc/ux500/ux500_pcm.c b/sound/soc/ux500/ux500_pcm.c index b6e5ae277299..31f9bbc74521 100644 --- a/sound/soc/ux500/ux500_pcm.c +++ b/sound/soc/ux500/ux500_pcm.c @@ -76,20 +76,20 @@ static struct dma_chan *ux500_pcm_request_chan(struct snd_soc_pcm_runtime *rtd, dma_params = snd_soc_dai_get_dma_data(dai, substream); dma_cfg = dma_params->dma_cfg; - mem_data_width = STEDMA40_HALFWORD_WIDTH; + mem_data_width = DMA_SLAVE_BUSWIDTH_2_BYTES; switch (dma_params->data_size) { case 32: - per_data_width = STEDMA40_WORD_WIDTH; + per_data_width = DMA_SLAVE_BUSWIDTH_4_BYTES; break; case 16: - per_data_width = STEDMA40_HALFWORD_WIDTH; + per_data_width = DMA_SLAVE_BUSWIDTH_2_BYTES; break; case 8: - per_data_width = STEDMA40_BYTE_WIDTH; + per_data_width = DMA_SLAVE_BUSWIDTH_1_BYTE; break; default: - per_data_width = STEDMA40_WORD_WIDTH; + per_data_width = DMA_SLAVE_BUSWIDTH_4_BYTES; } if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { -- cgit v1.2.3 From 8cc5af1255966ed82117249a64fe8b13edabc8c5 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Wed, 15 May 2013 10:51:58 +0100 Subject: dmaengine: ste_dma40_ll: Replace meaningless register set with comment Unsure of the author's intentions, rather than just removing the nop, we're replacing it with a comment containing the possible intention of the statement OR:ing with 0. Cc: Dan Williams Cc: Per Forlin Cc: Rabin Vincent Acked-by: Vinod Koul Signed-off-by: Lee Jones Signed-off-by: Linus Walleij --- drivers/dma/ste_dma40_ll.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/dma/ste_dma40_ll.c b/drivers/dma/ste_dma40_ll.c index a035dfeab6cb..27b818dee7c7 100644 --- a/drivers/dma/ste_dma40_ll.c +++ b/drivers/dma/ste_dma40_ll.c @@ -182,8 +182,10 @@ static int d40_phy_fill_lli(struct d40_phy_lli *lli, else lli->reg_cfg &= ~BIT(D40_SREG_CFG_TIM_POS); - /* Post link */ - lli->reg_lnk |= 0 << D40_SREG_LNK_PHY_PRE_POS; + /* + * Post link - D40_SREG_LNK_PHY_PRE_POS = 0 + * Relink happens after transfer completion. + */ return 0; } -- cgit v1.2.3 From a7dacb68b35a193d9bdaabde1e4e98140d81a991 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Wed, 15 May 2013 10:51:59 +0100 Subject: dmaengine: ste_dma40: Allow memcpy channels to be configured from DT At this moment in time the memcpy channels which can be used by the D40 are fixed, as each supported platform in Mainline uses the same ones. However, platforms do exist which don't follow this convention, so these will need to be tailored. Fortunately, these platforms will be DT only, so this change has very little impact on platform data. Cc: Dan Williams Cc: Per Forlin Cc: Rabin Vincent Acked-by: Vinod Koul Acked-by: Arnd Bergmann Signed-off-by: Lee Jones Signed-off-by: Linus Walleij --- .../devicetree/bindings/dma/ste-dma40.txt | 2 ++ drivers/dma/ste_dma40.c | 40 +++++++++++++++++----- include/linux/platform_data/dma-ste-dma40.h | 2 ++ 3 files changed, 36 insertions(+), 8 deletions(-) diff --git a/Documentation/devicetree/bindings/dma/ste-dma40.txt b/Documentation/devicetree/bindings/dma/ste-dma40.txt index 2679a873522d..aa272d866f6e 100644 --- a/Documentation/devicetree/bindings/dma/ste-dma40.txt +++ b/Documentation/devicetree/bindings/dma/ste-dma40.txt @@ -6,6 +6,7 @@ Required properties: - reg-names: Names of the above areas to use during resource look-up - interrupt: Should contain the DMAC interrupt number - #dma-cells: must be <3> +- memcpy-channels: Channels to be used for memcpy Optional properties: - dma-channels: Number of channels supported by hardware - if not present @@ -21,6 +22,7 @@ Example: interrupts = <0 25 0x4>; #dma-cells = <2>; + memcpy-channels = <56 57 58 59 60>; dma-channels = <8>; }; diff --git a/drivers/dma/ste_dma40.c b/drivers/dma/ste_dma40.c index 76c255fcdc2d..ae462d352110 100644 --- a/drivers/dma/ste_dma40.c +++ b/drivers/dma/ste_dma40.c @@ -58,6 +58,8 @@ #define D40_ALLOC_PHY BIT(30) #define D40_ALLOC_LOG_FREE 0 +#define D40_MEMCPY_MAX_CHANS 8 + /* Reserved event lines for memcpy only. */ #define DB8500_DMA_MEMCPY_EV_0 51 #define DB8500_DMA_MEMCPY_EV_1 56 @@ -522,6 +524,8 @@ struct d40_gen_dmac { * @phy_start: Physical memory start of the DMA registers. * @phy_size: Size of the DMA register map. * @irq: The IRQ number. + * @num_memcpy_chans: The number of channels used for memcpy (mem-to-mem + * transfers). * @num_phy_chans: The number of physical channels. Read from HW. This * is the number of available channels for this driver, not counting "Secure * mode" allocated physical channels. @@ -565,6 +569,7 @@ struct d40_base { phys_addr_t phy_start; resource_size_t phy_size; int irq; + int num_memcpy_chans; int num_phy_chans; int num_log_chans; struct device_dma_parameters dma_parms; @@ -2938,7 +2943,7 @@ static int __init d40_dmaengine_init(struct d40_base *base, } d40_chan_init(base, &base->dma_memcpy, base->log_chans, - base->num_log_chans, ARRAY_SIZE(dma40_memcpy_channels)); + base->num_log_chans, base->num_memcpy_chans); dma_cap_zero(base->dma_memcpy.cap_mask); dma_cap_set(DMA_MEMCPY, base->dma_memcpy.cap_mask); @@ -3139,6 +3144,7 @@ static struct d40_base * __init d40_hw_detect_init(struct platform_device *pdev) struct d40_base *base = NULL; int num_log_chans = 0; int num_phy_chans; + int num_memcpy_chans; int clk_ret = -EINVAL; int i; u32 pid; @@ -3209,6 +3215,12 @@ static struct d40_base * __init d40_hw_detect_init(struct platform_device *pdev) else num_phy_chans = 4 * (readl(virtbase + D40_DREG_ICFG) & 0x7) + 4; + /* The number of channels used for memcpy */ + if (plat_data->num_of_memcpy_chans) + num_memcpy_chans = plat_data->num_of_memcpy_chans; + else + num_memcpy_chans = ARRAY_SIZE(dma40_memcpy_channels); + num_log_chans = num_phy_chans * D40_MAX_LOG_CHAN_PER_PHY; dev_info(&pdev->dev, @@ -3216,7 +3228,7 @@ static struct d40_base * __init d40_hw_detect_init(struct platform_device *pdev) rev, res->start, num_phy_chans, num_log_chans); base = kzalloc(ALIGN(sizeof(struct d40_base), 4) + - (num_phy_chans + num_log_chans + ARRAY_SIZE(dma40_memcpy_channels)) * + (num_phy_chans + num_log_chans + num_memcpy_chans) * sizeof(struct d40_chan), GFP_KERNEL); if (base == NULL) { @@ -3226,6 +3238,7 @@ static struct d40_base * __init d40_hw_detect_init(struct platform_device *pdev) base->rev = rev; base->clk = clk; + base->num_memcpy_chans = num_memcpy_chans; base->num_phy_chans = num_phy_chans; base->num_log_chans = num_log_chans; base->phy_start = res->start; @@ -3469,12 +3482,8 @@ static int __init d40_of_probe(struct platform_device *pdev, struct device_node *np) { struct stedma40_platform_data *pdata; - - /* - * FIXME: Fill in this routine as more support is added. - * First platform enabled (u8500) doens't need any extra - * properties to run, so this is fairly sparce currently. - */ + int num_memcpy = 0; + const const __be32 *list; pdata = devm_kzalloc(&pdev->dev, sizeof(struct stedma40_platform_data), @@ -3482,6 +3491,21 @@ static int __init d40_of_probe(struct platform_device *pdev, if (!pdata) return -ENOMEM; + list = of_get_property(np, "memcpy-channels", &num_memcpy); + num_memcpy /= sizeof(*list); + + if (num_memcpy > D40_MEMCPY_MAX_CHANS || num_memcpy <= 0) { + d40_err(&pdev->dev, + "Invalid number of memcpy channels specified (%d)\n", + num_memcpy); + return -EINVAL; + } + pdata->num_of_memcpy_chans = num_memcpy; + + of_property_read_u32_array(np, "memcpy-channels", + dma40_memcpy_channels, + num_memcpy); + pdev->dev.platform_data = pdata; return 0; diff --git a/include/linux/platform_data/dma-ste-dma40.h b/include/linux/platform_data/dma-ste-dma40.h index ceba6dc566a9..1bb9b1852256 100644 --- a/include/linux/platform_data/dma-ste-dma40.h +++ b/include/linux/platform_data/dma-ste-dma40.h @@ -132,6 +132,7 @@ struct stedma40_chan_cfg { * @num_of_soft_lli_chans: The number of channels that needs to be configured * to use SoftLLI. * @use_esram_lcla: flag for mapping the lcla into esram region + * @num_of_memcpy_chans: The number of channels reserved for memcpy. * @num_of_phy_chans: The number of physical channels implemented in HW. * 0 means reading the number of channels from DMA HW but this is only valid * for 'multiple of 4' channels, like 8. @@ -141,6 +142,7 @@ struct stedma40_platform_data { int *soft_lli_chans; int num_of_soft_lli_chans; bool use_esram_lcla; + int num_of_memcpy_chans; int num_of_phy_chans; }; -- cgit v1.2.3 From 0117f7c7a3e8cdf72bea7d463b142db35e9c9cdc Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Wed, 15 May 2013 10:52:00 +0100 Subject: ARM: ux500: Stop passing DMA platform data though AUXDATA The DMA platform data is now empty due to some recent refactoring, so there is no longer a requirement to pass it though. Acked-by: Arnd Bergmann Signed-off-by: Lee Jones Signed-off-by: Linus Walleij --- arch/arm/mach-ux500/cpu-db8500.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c index 6e49e4ff6755..a40afd9d6e92 100644 --- a/arch/arm/mach-ux500/cpu-db8500.c +++ b/arch/arm/mach-ux500/cpu-db8500.c @@ -260,8 +260,7 @@ static struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = { OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80125000, "ux500-msp-i2s.3", &msp3_platform_data), /* Requires clock name bindings and channel address lookup table. */ - OF_DEV_AUXDATA("stericsson,db8500-dma40", 0x801C0000, - "dma40.0", &dma40_plat_data), + OF_DEV_AUXDATA("stericsson,db8500-dma40", 0x801C0000, "dma40.0", NULL), {}, }; -- cgit v1.2.3 From fd59f9e6abf2ebf0098c616e1742168db4360d13 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Wed, 15 May 2013 10:52:01 +0100 Subject: dmaengine: ste_dma40: Fetch the number of physical channels from DT Some platforms insist on obscure physical channel availability. This information is currently passed though platform data in internal BSP kernels. Once those platforms land, they'll need to configure them appropriately, so we may as well add the infrastructure. Cc: Dan Williams Cc: Per Forlin Cc: Rabin Vincent Acked-by: Vinod Koul Signed-off-by: Lee Jones Signed-off-by: Linus Walleij --- drivers/dma/ste_dma40.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/dma/ste_dma40.c b/drivers/dma/ste_dma40.c index ae462d352110..4e528dd30ad5 100644 --- a/drivers/dma/ste_dma40.c +++ b/drivers/dma/ste_dma40.c @@ -3482,7 +3482,7 @@ static int __init d40_of_probe(struct platform_device *pdev, struct device_node *np) { struct stedma40_platform_data *pdata; - int num_memcpy = 0; + int num_phy = 0, num_memcpy = 0; const const __be32 *list; pdata = devm_kzalloc(&pdev->dev, @@ -3491,6 +3491,11 @@ static int __init d40_of_probe(struct platform_device *pdev, if (!pdata) return -ENOMEM; + /* If absent this value will be obtained from h/w. */ + of_property_read_u32(np, "dma-channels", &num_phy); + if (num_phy > 0) + pdata->num_of_phy_chans = num_phy; + list = of_get_property(np, "memcpy-channels", &num_memcpy); num_memcpy /= sizeof(*list); -- cgit v1.2.3 From 499c2bc3cc89dcbbf08aa526cd4a984b92a4d2a8 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Wed, 15 May 2013 10:52:02 +0100 Subject: dmaengine: ste_dma40: Fetch disabled channels from DT Some platforms have channels which are not available for normal use. This information is currently passed though platform data in internal BSP kernels. Once those platforms land, they'll need to configure them appropriately, so we may as well add the infrastructure. Cc: Dan Williams Cc: Per Forlin Cc: Rabin Vincent Acked-by: Vinod Koul Acked-by: Arnd Bergmann Signed-off-by: Lee Jones Signed-off-by: Linus Walleij --- Documentation/devicetree/bindings/dma/ste-dma40.txt | 2 ++ drivers/dma/ste_dma40.c | 17 ++++++++++++++++- 2 files changed, 18 insertions(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/dma/ste-dma40.txt b/Documentation/devicetree/bindings/dma/ste-dma40.txt index aa272d866f6e..bea5b73a7390 100644 --- a/Documentation/devicetree/bindings/dma/ste-dma40.txt +++ b/Documentation/devicetree/bindings/dma/ste-dma40.txt @@ -11,6 +11,7 @@ Required properties: Optional properties: - dma-channels: Number of channels supported by hardware - if not present the driver will attempt to obtain the information from H/W +- disabled-channels: Channels which can not be used Example: @@ -23,6 +24,7 @@ Example: #dma-cells = <2>; memcpy-channels = <56 57 58 59 60>; + disabled-channels = <12>; dma-channels = <8>; }; diff --git a/drivers/dma/ste_dma40.c b/drivers/dma/ste_dma40.c index 4e528dd30ad5..ffac8225ff54 100644 --- a/drivers/dma/ste_dma40.c +++ b/drivers/dma/ste_dma40.c @@ -3482,7 +3482,7 @@ static int __init d40_of_probe(struct platform_device *pdev, struct device_node *np) { struct stedma40_platform_data *pdata; - int num_phy = 0, num_memcpy = 0; + int num_phy = 0, num_memcpy = 0, num_disabled = 0; const const __be32 *list; pdata = devm_kzalloc(&pdev->dev, @@ -3511,6 +3511,21 @@ static int __init d40_of_probe(struct platform_device *pdev, dma40_memcpy_channels, num_memcpy); + list = of_get_property(np, "disabled-channels", &num_disabled); + num_disabled /= sizeof(*list); + + if (num_disabled > STEDMA40_MAX_PHYS || num_disabled < 0) { + d40_err(&pdev->dev, + "Invalid number of disabled channels specified (%d)\n", + num_disabled); + return -EINVAL; + } + + of_property_read_u32_array(np, "disabled-channels", + pdata->disabled_channels, + num_disabled); + pdata->disabled_channels[num_disabled] = -1; + pdev->dev.platform_data = pdata; return 0; -- cgit v1.2.3 From 8581bbcd30afa9d2fa12ad1605c809b7ada495ea Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Fri, 31 May 2013 09:50:07 +0800 Subject: dmaengine: ste_dma40: fix error return code in d40_probe() In many of the error handling case, the return value 'ret' not set and 0 will be return from d40_probe() even if error, but we should return a negative error code instead in those error handling case. This patch fixed them, and also removed useless variable 'err'. Signed-off-by: Wei Yongjun Signed-off-by: Linus Walleij --- drivers/dma/ste_dma40.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/drivers/dma/ste_dma40.c b/drivers/dma/ste_dma40.c index ffac8225ff54..842e2ed04659 100644 --- a/drivers/dma/ste_dma40.c +++ b/drivers/dma/ste_dma40.c @@ -3535,7 +3535,6 @@ static int __init d40_probe(struct platform_device *pdev) { struct stedma40_platform_data *plat_data = pdev->dev.platform_data; struct device_node *np = pdev->dev.of_node; - int err; int ret = -ENOENT; struct d40_base *base = NULL; struct resource *res = NULL; @@ -3647,6 +3646,7 @@ static int __init d40_probe(struct platform_device *pdev) base->lcpa_regulator = regulator_get(base->dev, "lcla_esram"); if (IS_ERR(base->lcpa_regulator)) { d40_err(&pdev->dev, "Failed to get lcpa_regulator\n"); + ret = PTR_ERR(base->lcpa_regulator); base->lcpa_regulator = NULL; goto failure; } @@ -3662,13 +3662,13 @@ static int __init d40_probe(struct platform_device *pdev) } base->initialized = true; - err = d40_dmaengine_init(base, num_reserved_chans); - if (err) + ret = d40_dmaengine_init(base, num_reserved_chans); + if (ret) goto failure; base->dev->dma_parms = &base->dma_parms; - err = dma_set_max_seg_size(base->dev, STEDMA40_MAX_SEG_SIZE); - if (err) { + ret = dma_set_max_seg_size(base->dev, STEDMA40_MAX_SEG_SIZE); + if (ret) { d40_err(&pdev->dev, "Failed to set dma max seg size\n"); goto failure; } @@ -3676,8 +3676,8 @@ static int __init d40_probe(struct platform_device *pdev) d40_hw_init(base); if (np) { - err = of_dma_controller_register(np, d40_xlate, NULL); - if (err && err != -ENODEV) + ret = of_dma_controller_register(np, d40_xlate, NULL); + if (ret) dev_err(&pdev->dev, "could not register of_dma_controller\n"); } -- cgit v1.2.3 From a41677c6c5160f031038951fb94defeb93fe8160 Mon Sep 17 00:00:00 2001 From: Suman Anna Date: Fri, 1 Feb 2013 20:24:51 -0600 Subject: omap: mailbox: check iomem resource before dereferencing it Add a NULL check for iomem resource in mailbox probe functions. Signed-off-by: Fernando Guzman Lugo Signed-off-by: Suman Anna --- arch/arm/mach-omap1/mailbox.c | 3 +++ arch/arm/mach-omap2/mailbox.c | 3 +++ 2 files changed, 6 insertions(+) diff --git a/arch/arm/mach-omap1/mailbox.c b/arch/arm/mach-omap1/mailbox.c index efc8f207f6fc..a343d5f9a50a 100644 --- a/arch/arm/mach-omap1/mailbox.c +++ b/arch/arm/mach-omap1/mailbox.c @@ -152,6 +152,9 @@ static int omap1_mbox_probe(struct platform_device *pdev) list[0]->irq = platform_get_irq_byname(pdev, "dsp"); mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!mem) + return -ENOENT; + mbox_base = ioremap(mem->start, resource_size(mem)); if (!mbox_base) return -ENOMEM; diff --git a/arch/arm/mach-omap2/mailbox.c b/arch/arm/mach-omap2/mailbox.c index 0b080267b7f6..9fe0bf2fef33 100644 --- a/arch/arm/mach-omap2/mailbox.c +++ b/arch/arm/mach-omap2/mailbox.c @@ -382,6 +382,9 @@ static int omap2_mbox_probe(struct platform_device *pdev) } mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!mem) + return -ENOENT; + mbox_base = ioremap(mem->start, resource_size(mem)); if (!mbox_base) return -ENOMEM; -- cgit v1.2.3 From ecf305cf81c68446508c283015694e304939be5f Mon Sep 17 00:00:00 2001 From: Suman Anna Date: Fri, 1 Feb 2013 20:37:06 -0600 Subject: omap: mailbox: call request_irq after mbox queues are allocated The OMAP mailbox startup code is enabling the interrupt before any of the associated mailbox queues are allocated. Move this code so that the interrupt configuration for a mailbox is together. Signed-off-by: Fernando Guzman Lugo Signed-off-by: Suman Anna --- arch/arm/plat-omap/mailbox.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) diff --git a/arch/arm/plat-omap/mailbox.c b/arch/arm/plat-omap/mailbox.c index 42377ef9ea3d..f65eaf00fce6 100644 --- a/arch/arm/plat-omap/mailbox.c +++ b/arch/arm/plat-omap/mailbox.c @@ -261,13 +261,6 @@ static int omap_mbox_startup(struct omap_mbox *mbox) } if (!mbox->use_count++) { - ret = request_irq(mbox->irq, mbox_interrupt, IRQF_SHARED, - mbox->name, mbox); - if (unlikely(ret)) { - pr_err("failed to register mailbox interrupt:%d\n", - ret); - goto fail_request_irq; - } mq = mbox_queue_alloc(mbox, NULL, mbox_tx_tasklet); if (!mq) { ret = -ENOMEM; @@ -282,17 +275,24 @@ static int omap_mbox_startup(struct omap_mbox *mbox) } mbox->rxq = mq; mq->mbox = mbox; + ret = request_irq(mbox->irq, mbox_interrupt, IRQF_SHARED, + mbox->name, mbox); + if (unlikely(ret)) { + pr_err("failed to register mailbox interrupt:%d\n", + ret); + goto fail_request_irq; + } omap_mbox_enable_irq(mbox, IRQ_RX); } mutex_unlock(&mbox_configured_lock); return 0; +fail_request_irq: + mbox_queue_free(mbox->rxq); fail_alloc_rxq: mbox_queue_free(mbox->txq); fail_alloc_txq: - free_irq(mbox->irq, mbox); -fail_request_irq: if (mbox->ops->shutdown) mbox->ops->shutdown(mbox); mbox->use_count--; -- cgit v1.2.3 From f91ca05ff490421d348e27baa2363a49547dee57 Mon Sep 17 00:00:00 2001 From: Suman Anna Date: Fri, 7 Jun 2013 16:27:45 -0500 Subject: omap: mailbox: correct the argument type for irq ops The argument type used in the actual individual omap_mbox_ops for irqs should be omap_mbox_irq_t instead of omap_mbox_type_t. Signed-off-by: Suman Anna --- arch/arm/mach-omap1/mailbox.c | 6 +++--- arch/arm/mach-omap2/mailbox.c | 15 ++++----------- 2 files changed, 7 insertions(+), 14 deletions(-) diff --git a/arch/arm/mach-omap1/mailbox.c b/arch/arm/mach-omap1/mailbox.c index a343d5f9a50a..7246a5258292 100644 --- a/arch/arm/mach-omap1/mailbox.c +++ b/arch/arm/mach-omap1/mailbox.c @@ -86,21 +86,21 @@ static int omap1_mbox_fifo_full(struct omap_mbox *mbox) /* irq */ static void -omap1_mbox_enable_irq(struct omap_mbox *mbox, omap_mbox_type_t irq) +omap1_mbox_enable_irq(struct omap_mbox *mbox, omap_mbox_irq_t irq) { if (irq == IRQ_RX) enable_irq(mbox->irq); } static void -omap1_mbox_disable_irq(struct omap_mbox *mbox, omap_mbox_type_t irq) +omap1_mbox_disable_irq(struct omap_mbox *mbox, omap_mbox_irq_t irq) { if (irq == IRQ_RX) disable_irq(mbox->irq); } static int -omap1_mbox_is_irq(struct omap_mbox *mbox, omap_mbox_type_t irq) +omap1_mbox_is_irq(struct omap_mbox *mbox, omap_mbox_irq_t irq) { if (irq == IRQ_TX) return 0; diff --git a/arch/arm/mach-omap2/mailbox.c b/arch/arm/mach-omap2/mailbox.c index 9fe0bf2fef33..b01aae69010f 100644 --- a/arch/arm/mach-omap2/mailbox.c +++ b/arch/arm/mach-omap2/mailbox.c @@ -61,9 +61,6 @@ struct omap_mbox2_priv { unsigned long irqdisable; }; -static void omap2_mbox_enable_irq(struct omap_mbox *mbox, - omap_mbox_type_t irq); - static inline unsigned int mbox_read_reg(size_t ofs) { return __raw_readl(mbox_base + ofs); @@ -124,8 +121,7 @@ static int omap2_mbox_fifo_full(struct omap_mbox *mbox) } /* Mailbox IRQ handle functions */ -static void omap2_mbox_enable_irq(struct omap_mbox *mbox, - omap_mbox_type_t irq) +static void omap2_mbox_enable_irq(struct omap_mbox *mbox, omap_mbox_irq_t irq) { struct omap_mbox2_priv *p = mbox->priv; u32 l, bit = (irq == IRQ_TX) ? p->notfull_bit : p->newmsg_bit; @@ -135,8 +131,7 @@ static void omap2_mbox_enable_irq(struct omap_mbox *mbox, mbox_write_reg(l, p->irqenable); } -static void omap2_mbox_disable_irq(struct omap_mbox *mbox, - omap_mbox_type_t irq) +static void omap2_mbox_disable_irq(struct omap_mbox *mbox, omap_mbox_irq_t irq) { struct omap_mbox2_priv *p = mbox->priv; u32 bit = (irq == IRQ_TX) ? p->notfull_bit : p->newmsg_bit; @@ -147,8 +142,7 @@ static void omap2_mbox_disable_irq(struct omap_mbox *mbox, mbox_write_reg(bit, p->irqdisable); } -static void omap2_mbox_ack_irq(struct omap_mbox *mbox, - omap_mbox_type_t irq) +static void omap2_mbox_ack_irq(struct omap_mbox *mbox, omap_mbox_irq_t irq) { struct omap_mbox2_priv *p = mbox->priv; u32 bit = (irq == IRQ_TX) ? p->notfull_bit : p->newmsg_bit; @@ -159,8 +153,7 @@ static void omap2_mbox_ack_irq(struct omap_mbox *mbox, mbox_read_reg(p->irqstatus); } -static int omap2_mbox_is_irq(struct omap_mbox *mbox, - omap_mbox_type_t irq) +static int omap2_mbox_is_irq(struct omap_mbox *mbox, omap_mbox_irq_t irq) { struct omap_mbox2_priv *p = mbox->priv; u32 bit = (irq == IRQ_TX) ? p->notfull_bit : p->newmsg_bit; -- cgit v1.2.3 From b8a7cf8e2b15a3abac0a9e376b6b7ed4bbb6ee8e Mon Sep 17 00:00:00 2001 From: Suman Anna Date: Mon, 28 Jan 2013 17:21:58 -0600 Subject: ARM: OMAP2+: mbox: remove dependencies with soc.h The OMAP mailbox platform driver code has been cleaned up to remove the dependencies with soc.h in preparation for moving the mailbox code to drivers folder. The code relied on cpu_is_xxx/soc_is_xxx macros previously to pick the the right set of mailbox devices and register with the mailbox driver. This data is now represented in a concise format and moved to the respective omap_hwmod data files and published to the driver through the platform data. Cc: Paul Walmsley Signed-off-by: Suman Anna --- arch/arm/mach-omap2/devices.c | 9 +- arch/arm/mach-omap2/mailbox.c | 254 +++++++++++------------------ arch/arm/mach-omap2/omap_hwmod_2420_data.c | 12 ++ arch/arm/mach-omap2/omap_hwmod_2430_data.c | 11 ++ arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 11 ++ arch/arm/plat-omap/include/plat/mailbox.h | 2 +- include/linux/platform_data/mailbox-omap.h | 53 ++++++ 7 files changed, 189 insertions(+), 163 deletions(-) create mode 100644 include/linux/platform_data/mailbox-omap.h diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index 4269fc145698..4c97a86115e6 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -20,6 +20,7 @@ #include #include #include +#include #include #include @@ -332,14 +333,20 @@ static inline void __init omap_init_mbox(void) { struct omap_hwmod *oh; struct platform_device *pdev; + struct omap_mbox_pdata *pdata; oh = omap_hwmod_lookup("mailbox"); if (!oh) { pr_err("%s: unable to find hwmod\n", __func__); return; } + if (!oh->dev_attr) { + pr_err("%s: hwmod doesn't have valid attrs\n", __func__); + return; + } - pdev = omap_device_build("omap-mailbox", -1, oh, NULL, 0); + pdata = (struct omap_mbox_pdata *)oh->dev_attr; + pdev = omap_device_build("omap-mailbox", -1, oh, pdata, sizeof(*pdata)); WARN(IS_ERR(pdev), "%s: could not build device, err %ld\n", __func__, PTR_ERR(pdev)); } diff --git a/arch/arm/mach-omap2/mailbox.c b/arch/arm/mach-omap2/mailbox.c index b01aae69010f..de21198d54ff 100644 --- a/arch/arm/mach-omap2/mailbox.c +++ b/arch/arm/mach-omap2/mailbox.c @@ -11,16 +11,16 @@ */ #include +#include #include #include #include #include #include +#include #include -#include "soc.h" - #define MAILBOX_REVISION 0x000 #define MAILBOX_MESSAGE(m) (0x040 + 4 * (m)) #define MAILBOX_FIFOSTATUS(m) (0x080 + 4 * (m)) @@ -59,6 +59,7 @@ struct omap_mbox2_priv { u32 notfull_bit; u32 ctx[OMAP4_MBOX_NR_REGS]; unsigned long irqdisable; + u32 intr_type; }; static inline unsigned int mbox_read_reg(size_t ofs) @@ -136,7 +137,11 @@ static void omap2_mbox_disable_irq(struct omap_mbox *mbox, omap_mbox_irq_t irq) struct omap_mbox2_priv *p = mbox->priv; u32 bit = (irq == IRQ_TX) ? p->notfull_bit : p->newmsg_bit; - if (!cpu_is_omap44xx()) + /* + * Read and update the interrupt configuration register for pre-OMAP4. + * OMAP4 and later SoCs have a dedicated interrupt disabling register. + */ + if (!p->intr_type) bit = mbox_read_reg(p->irqdisable) & ~bit; mbox_write_reg(bit, p->irqdisable); @@ -168,7 +173,8 @@ static void omap2_mbox_save_ctx(struct omap_mbox *mbox) int i; struct omap_mbox2_priv *p = mbox->priv; int nr_regs; - if (cpu_is_omap44xx()) + + if (p->intr_type) nr_regs = OMAP4_MBOX_NR_REGS; else nr_regs = MBOX_NR_REGS; @@ -185,7 +191,8 @@ static void omap2_mbox_restore_ctx(struct omap_mbox *mbox) int i; struct omap_mbox2_priv *p = mbox->priv; int nr_regs; - if (cpu_is_omap44xx()) + + if (p->intr_type) nr_regs = OMAP4_MBOX_NR_REGS; else nr_regs = MBOX_NR_REGS; @@ -213,188 +220,113 @@ static struct omap_mbox_ops omap2_mbox_ops = { .restore_ctx = omap2_mbox_restore_ctx, }; -/* - * MAILBOX 0: ARM -> DSP, - * MAILBOX 1: ARM <- DSP. - * MAILBOX 2: ARM -> IVA, - * MAILBOX 3: ARM <- IVA. - */ - -/* FIXME: the following structs should be filled automatically by the user id */ - -#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP2) -/* DSP */ -static struct omap_mbox2_priv omap2_mbox_dsp_priv = { - .tx_fifo = { - .msg = MAILBOX_MESSAGE(0), - .fifo_stat = MAILBOX_FIFOSTATUS(0), - }, - .rx_fifo = { - .msg = MAILBOX_MESSAGE(1), - .msg_stat = MAILBOX_MSGSTATUS(1), - }, - .irqenable = MAILBOX_IRQENABLE(0), - .irqstatus = MAILBOX_IRQSTATUS(0), - .notfull_bit = MAILBOX_IRQ_NOTFULL(0), - .newmsg_bit = MAILBOX_IRQ_NEWMSG(1), - .irqdisable = MAILBOX_IRQENABLE(0), -}; - -struct omap_mbox mbox_dsp_info = { - .name = "dsp", - .ops = &omap2_mbox_ops, - .priv = &omap2_mbox_dsp_priv, -}; -#endif - -#if defined(CONFIG_ARCH_OMAP3) -struct omap_mbox *omap3_mboxes[] = { &mbox_dsp_info, NULL }; -#endif - -#if defined(CONFIG_SOC_OMAP2420) -/* IVA */ -static struct omap_mbox2_priv omap2_mbox_iva_priv = { - .tx_fifo = { - .msg = MAILBOX_MESSAGE(2), - .fifo_stat = MAILBOX_FIFOSTATUS(2), - }, - .rx_fifo = { - .msg = MAILBOX_MESSAGE(3), - .msg_stat = MAILBOX_MSGSTATUS(3), - }, - .irqenable = MAILBOX_IRQENABLE(3), - .irqstatus = MAILBOX_IRQSTATUS(3), - .notfull_bit = MAILBOX_IRQ_NOTFULL(2), - .newmsg_bit = MAILBOX_IRQ_NEWMSG(3), - .irqdisable = MAILBOX_IRQENABLE(3), -}; - -static struct omap_mbox mbox_iva_info = { - .name = "iva", - .ops = &omap2_mbox_ops, - .priv = &omap2_mbox_iva_priv, -}; -#endif - -#ifdef CONFIG_ARCH_OMAP2 -struct omap_mbox *omap2_mboxes[] = { - &mbox_dsp_info, -#ifdef CONFIG_SOC_OMAP2420 - &mbox_iva_info, -#endif - NULL -}; -#endif - -#if defined(CONFIG_ARCH_OMAP4) -/* OMAP4 */ -static struct omap_mbox2_priv omap2_mbox_1_priv = { - .tx_fifo = { - .msg = MAILBOX_MESSAGE(0), - .fifo_stat = MAILBOX_FIFOSTATUS(0), - }, - .rx_fifo = { - .msg = MAILBOX_MESSAGE(1), - .msg_stat = MAILBOX_MSGSTATUS(1), - }, - .irqenable = OMAP4_MAILBOX_IRQENABLE(0), - .irqstatus = OMAP4_MAILBOX_IRQSTATUS(0), - .notfull_bit = MAILBOX_IRQ_NOTFULL(0), - .newmsg_bit = MAILBOX_IRQ_NEWMSG(1), - .irqdisable = OMAP4_MAILBOX_IRQENABLE_CLR(0), -}; - -struct omap_mbox mbox_1_info = { - .name = "mailbox-1", - .ops = &omap2_mbox_ops, - .priv = &omap2_mbox_1_priv, -}; - -static struct omap_mbox2_priv omap2_mbox_2_priv = { - .tx_fifo = { - .msg = MAILBOX_MESSAGE(3), - .fifo_stat = MAILBOX_FIFOSTATUS(3), - }, - .rx_fifo = { - .msg = MAILBOX_MESSAGE(2), - .msg_stat = MAILBOX_MSGSTATUS(2), - }, - .irqenable = OMAP4_MAILBOX_IRQENABLE(0), - .irqstatus = OMAP4_MAILBOX_IRQSTATUS(0), - .notfull_bit = MAILBOX_IRQ_NOTFULL(3), - .newmsg_bit = MAILBOX_IRQ_NEWMSG(2), - .irqdisable = OMAP4_MAILBOX_IRQENABLE_CLR(0), -}; - -struct omap_mbox mbox_2_info = { - .name = "mailbox-2", - .ops = &omap2_mbox_ops, - .priv = &omap2_mbox_2_priv, -}; - -struct omap_mbox *omap4_mboxes[] = { &mbox_1_info, &mbox_2_info, NULL }; -#endif - static int omap2_mbox_probe(struct platform_device *pdev) { struct resource *mem; int ret; - struct omap_mbox **list; - - if (false) - ; -#if defined(CONFIG_ARCH_OMAP3) - else if (cpu_is_omap34xx()) { - list = omap3_mboxes; + struct omap_mbox **list, *mbox, *mboxblk; + struct omap_mbox2_priv *priv, *privblk; + struct omap_mbox_pdata *pdata = pdev->dev.platform_data; + struct omap_mbox_dev_info *info; + int i; - list[0]->irq = platform_get_irq(pdev, 0); + if (!pdata || !pdata->info_cnt || !pdata->info) { + pr_err("%s: platform not supported\n", __func__); + return -ENODEV; } -#endif -#if defined(CONFIG_ARCH_OMAP2) - else if (cpu_is_omap2430()) { - list = omap2_mboxes; - list[0]->irq = platform_get_irq(pdev, 0); - } else if (cpu_is_omap2420()) { - list = omap2_mboxes; + /* allocate one extra for marking end of list */ + list = kzalloc((pdata->info_cnt + 1) * sizeof(*list), GFP_KERNEL); + if (!list) + return -ENOMEM; - list[0]->irq = platform_get_irq_byname(pdev, "dsp"); - list[1]->irq = platform_get_irq_byname(pdev, "iva"); + mboxblk = mbox = kzalloc(pdata->info_cnt * sizeof(*mbox), GFP_KERNEL); + if (!mboxblk) { + ret = -ENOMEM; + goto free_list; } -#endif -#if defined(CONFIG_ARCH_OMAP4) - else if (cpu_is_omap44xx()) { - list = omap4_mboxes; - list[0]->irq = list[1]->irq = platform_get_irq(pdev, 0); + privblk = priv = kzalloc(pdata->info_cnt * sizeof(*priv), GFP_KERNEL); + if (!privblk) { + ret = -ENOMEM; + goto free_mboxblk; } -#endif - else { - pr_err("%s: platform not supported\n", __func__); - return -ENODEV; + + info = pdata->info; + for (i = 0; i < pdata->info_cnt; i++, info++, priv++) { + priv->tx_fifo.msg = MAILBOX_MESSAGE(info->tx_id); + priv->tx_fifo.fifo_stat = MAILBOX_FIFOSTATUS(info->tx_id); + priv->rx_fifo.msg = MAILBOX_MESSAGE(info->rx_id); + priv->rx_fifo.msg_stat = MAILBOX_MSGSTATUS(info->rx_id); + priv->notfull_bit = MAILBOX_IRQ_NOTFULL(info->tx_id); + priv->newmsg_bit = MAILBOX_IRQ_NEWMSG(info->rx_id); + if (pdata->intr_type) { + priv->irqenable = OMAP4_MAILBOX_IRQENABLE(info->usr_id); + priv->irqstatus = OMAP4_MAILBOX_IRQSTATUS(info->usr_id); + priv->irqdisable = + OMAP4_MAILBOX_IRQENABLE_CLR(info->usr_id); + } else { + priv->irqenable = MAILBOX_IRQENABLE(info->usr_id); + priv->irqstatus = MAILBOX_IRQSTATUS(info->usr_id); + priv->irqdisable = MAILBOX_IRQENABLE(info->usr_id); + } + priv->intr_type = pdata->intr_type; + + mbox->priv = priv; + mbox->name = info->name; + mbox->ops = &omap2_mbox_ops; + mbox->irq = platform_get_irq(pdev, info->irq_id); + if (mbox->irq < 0) { + ret = mbox->irq; + goto free_privblk; + } + list[i] = mbox++; } mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!mem) - return -ENOENT; + if (!mem) { + ret = -ENOENT; + goto free_privblk; + } mbox_base = ioremap(mem->start, resource_size(mem)); - if (!mbox_base) - return -ENOMEM; + if (!mbox_base) { + ret = -ENOMEM; + goto free_privblk; + } ret = omap_mbox_register(&pdev->dev, list); - if (ret) { - iounmap(mbox_base); - return ret; - } + if (ret) + goto unmap_mbox; + platform_set_drvdata(pdev, list); return 0; + +unmap_mbox: + iounmap(mbox_base); +free_privblk: + kfree(privblk); +free_mboxblk: + kfree(mboxblk); +free_list: + kfree(list); + return ret; } static int omap2_mbox_remove(struct platform_device *pdev) { + struct omap_mbox2_priv *privblk; + struct omap_mbox **list = platform_get_drvdata(pdev); + struct omap_mbox *mboxblk = list[0]; + + privblk = mboxblk->priv; omap_mbox_unregister(); iounmap(mbox_base); + kfree(privblk); + kfree(mboxblk); + kfree(list); + platform_set_drvdata(pdev, NULL); + return 0; } diff --git a/arch/arm/mach-omap2/omap_hwmod_2420_data.c b/arch/arm/mach-omap2/omap_hwmod_2420_data.c index 5137cc84b504..dbcb928eea50 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2420_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2420_data.c @@ -16,6 +16,7 @@ #include #include #include +#include #include #include "omap_hwmod.h" @@ -166,6 +167,16 @@ static struct omap_hwmod omap2420_dma_system_hwmod = { }; /* mailbox */ +static struct omap_mbox_dev_info omap2420_mailbox_info[] = { + { .name = "dsp", .tx_id = 0, .rx_id = 1, .irq_id = 0, .usr_id = 0 }, + { .name = "iva", .tx_id = 2, .rx_id = 3, .irq_id = 1, .usr_id = 3 }, +}; + +static struct omap_mbox_pdata omap2420_mailbox_attrs = { + .info_cnt = ARRAY_SIZE(omap2420_mailbox_info), + .info = omap2420_mailbox_info, +}; + static struct omap_hwmod_irq_info omap2420_mailbox_irqs[] = { { .name = "dsp", .irq = 26 + OMAP_INTC_START, }, { .name = "iva", .irq = 34 + OMAP_INTC_START, }, @@ -186,6 +197,7 @@ static struct omap_hwmod omap2420_mailbox_hwmod = { .idlest_idle_bit = OMAP24XX_ST_MAILBOXES_SHIFT, }, }, + .dev_attr = &omap2420_mailbox_attrs, }; /* diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c index 4ce999ee3ee9..df2f8742fe41 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c @@ -17,6 +17,7 @@ #include #include #include +#include #include #include "omap_hwmod.h" @@ -170,6 +171,15 @@ static struct omap_hwmod omap2430_dma_system_hwmod = { }; /* mailbox */ +static struct omap_mbox_dev_info omap2430_mailbox_info[] = { + { .name = "dsp", .tx_id = 0, .rx_id = 1 }, +}; + +static struct omap_mbox_pdata omap2430_mailbox_attrs = { + .info_cnt = ARRAY_SIZE(omap2430_mailbox_info), + .info = omap2430_mailbox_info, +}; + static struct omap_hwmod_irq_info omap2430_mailbox_irqs[] = { { .irq = 26 + OMAP_INTC_START, }, { .irq = -1 }, @@ -189,6 +199,7 @@ static struct omap_hwmod omap2430_mailbox_hwmod = { .idlest_idle_bit = OMAP24XX_ST_MAILBOXES_SHIFT, }, }, + .dev_attr = &omap2430_mailbox_attrs, }; /* mcspi3 */ diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index 31c7126eb3bb..9ac5122396d8 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -25,6 +25,7 @@ #include #include #include +#include #include #include "am35xx.h" @@ -1505,6 +1506,15 @@ static struct omap_hwmod_class omap3xxx_mailbox_hwmod_class = { .sysc = &omap3xxx_mailbox_sysc, }; +static struct omap_mbox_dev_info omap3xxx_mailbox_info[] = { + { .name = "dsp", .tx_id = 0, .rx_id = 1 }, +}; + +static struct omap_mbox_pdata omap3xxx_mailbox_attrs = { + .info_cnt = ARRAY_SIZE(omap3xxx_mailbox_info), + .info = omap3xxx_mailbox_info, +}; + static struct omap_hwmod_irq_info omap3xxx_mailbox_irqs[] = { { .irq = 26 + OMAP_INTC_START, }, { .irq = -1 }, @@ -1524,6 +1534,7 @@ static struct omap_hwmod omap3xxx_mailbox_hwmod = { .idlest_idle_bit = OMAP3430_ST_MAILBOXES_SHIFT, }, }, + .dev_attr = &omap3xxx_mailbox_attrs, }; /* diff --git a/arch/arm/plat-omap/include/plat/mailbox.h b/arch/arm/plat-omap/include/plat/mailbox.h index cc3921e9059c..e98f7e234686 100644 --- a/arch/arm/plat-omap/include/plat/mailbox.h +++ b/arch/arm/plat-omap/include/plat/mailbox.h @@ -51,7 +51,7 @@ struct omap_mbox_queue { }; struct omap_mbox { - char *name; + const char *name; unsigned int irq; struct omap_mbox_queue *txq, *rxq; struct omap_mbox_ops *ops; diff --git a/include/linux/platform_data/mailbox-omap.h b/include/linux/platform_data/mailbox-omap.h new file mode 100644 index 000000000000..676cd642bb3f --- /dev/null +++ b/include/linux/platform_data/mailbox-omap.h @@ -0,0 +1,53 @@ +/* + * mailbox-omap.h + * + * Copyright (C) 2013 Texas Instruments, Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef _PLAT_MAILBOX_H +#define _PLAT_MAILBOX_H + +/* Interrupt register configuration types */ +#define MBOX_INTR_CFG_TYPE1 (0) +#define MBOX_INTR_CFG_TYPE2 (1) + +/** + * struct omap_mbox_dev_info - OMAP mailbox device attribute info + * @name: name of the mailbox device + * @tx_id: mailbox queue id used for transmitting messages + * @rx_id: mailbox queue id on which messages are received + * @irq_id: irq identifier number to use from the hwmod data + * @usr_id: mailbox user id for identifying the interrupt into + * the MPU interrupt controller. + */ +struct omap_mbox_dev_info { + const char *name; + u32 tx_id; + u32 rx_id; + u32 irq_id; + u32 usr_id; +}; + +/** + * struct omap_mbox_pdata - OMAP mailbox platform data + * @intr_type: type of interrupt configuration registers used + while programming mailbox queue interrupts + * @info_cnt: number of mailbox devices for the platform + * @info: array of mailbox device attributes + */ +struct omap_mbox_pdata { + u32 intr_type; + u32 info_cnt; + struct omap_mbox_dev_info *info; +}; + +#endif /* _PLAT_MAILBOX_H */ -- cgit v1.2.3 From fe32c1f6024e357f586b1d666237cab80a1215ce Mon Sep 17 00:00:00 2001 From: Suman Anna Date: Tue, 7 May 2013 17:30:27 -0500 Subject: ARM: OMAP2+: add user and fifo info to mailbox platform data The different generations of OMAP2+ SoCs have almost the same mailbox IP, but the IP has configurable parameters for number of users (interrupts it can generate out towards processors) and number of fifos (the base unidirectional h/w communication channel). This data cannot be read from any registers, and so has been added to the platform data. This data together with the interrupt-type configuration can be used in properly figuring out the number of registers to save and restore in the OMAP mailbox driver code. Cc: Paul Walmsley Signed-off-by: Suman Anna --- arch/arm/mach-omap2/omap_hwmod_2420_data.c | 2 ++ arch/arm/mach-omap2/omap_hwmod_2430_data.c | 2 ++ arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 2 ++ include/linux/platform_data/mailbox-omap.h | 5 +++++ 4 files changed, 11 insertions(+) diff --git a/arch/arm/mach-omap2/omap_hwmod_2420_data.c b/arch/arm/mach-omap2/omap_hwmod_2420_data.c index dbcb928eea50..d8b9d60f854f 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2420_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2420_data.c @@ -173,6 +173,8 @@ static struct omap_mbox_dev_info omap2420_mailbox_info[] = { }; static struct omap_mbox_pdata omap2420_mailbox_attrs = { + .num_users = 4, + .num_fifos = 6, .info_cnt = ARRAY_SIZE(omap2420_mailbox_info), .info = omap2420_mailbox_info, }; diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c index df2f8742fe41..5b9083461dc5 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c @@ -176,6 +176,8 @@ static struct omap_mbox_dev_info omap2430_mailbox_info[] = { }; static struct omap_mbox_pdata omap2430_mailbox_attrs = { + .num_users = 4, + .num_fifos = 6, .info_cnt = ARRAY_SIZE(omap2430_mailbox_info), .info = omap2430_mailbox_info, }; diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index 9ac5122396d8..8e4cbc99ce28 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -1511,6 +1511,8 @@ static struct omap_mbox_dev_info omap3xxx_mailbox_info[] = { }; static struct omap_mbox_pdata omap3xxx_mailbox_attrs = { + .num_users = 2, + .num_fifos = 2, .info_cnt = ARRAY_SIZE(omap3xxx_mailbox_info), .info = omap3xxx_mailbox_info, }; diff --git a/include/linux/platform_data/mailbox-omap.h b/include/linux/platform_data/mailbox-omap.h index 676cd642bb3f..4631dbb4255e 100644 --- a/include/linux/platform_data/mailbox-omap.h +++ b/include/linux/platform_data/mailbox-omap.h @@ -41,11 +41,16 @@ struct omap_mbox_dev_info { * struct omap_mbox_pdata - OMAP mailbox platform data * @intr_type: type of interrupt configuration registers used while programming mailbox queue interrupts + * @num_users: number of users (processor devices) that the mailbox + * h/w block can interrupt + * @num_fifos: number of h/w fifos within the mailbox h/w block * @info_cnt: number of mailbox devices for the platform * @info: array of mailbox device attributes */ struct omap_mbox_pdata { u32 intr_type; + u32 num_users; + u32 num_fifos; u32 info_cnt; struct omap_mbox_dev_info *info; }; -- cgit v1.2.3 From c869c75c16b3d1ffcf64fb2fd63ba0c4a369071c Mon Sep 17 00:00:00 2001 From: Suman Anna Date: Tue, 12 Mar 2013 17:55:29 -0500 Subject: mailbox/omap: move the OMAP mailbox framework to drivers The mailbox hardware (in OMAP) uses a queued mailbox interrupt mechanism that provides a communication channel between processors through a set of registers and their associated interrupt signals by sending and receiving messages. The OMAP mailbox framework/driver code is moved to be under drivers/mailbox, in preparation for adapting to a common mailbox driver framework. This allows the build for OMAP mailbox to be enabled (it was disabled during the multi-platform support). As part of the migration from plat and mach code: - Kconfig symbols have been renamed to build OMAP1 or OMAP2+ drivers. - mailbox.h under plat-omap/plat/include has been split into a public and private header files. The public header has only the API related functions and types. - The module name mailbox.ko from plat-omap is changed to omap-mailbox.ko - The module name mailbox_mach.ko from mach-omapX is changed as mailbox_omap1.ko for OMAP1 mailbox_omap2.ko for OMAP2+ Cc: Tony Lindgren [gregkh@linuxfoundation.org: ack for staging part] Acked-by: Greg Kroah-Hartman Signed-off-by: Omar Ramirez Luna Signed-off-by: Suman Anna --- arch/arm/configs/omap1_defconfig | 3 +- arch/arm/mach-omap1/Makefile | 4 - arch/arm/mach-omap1/mailbox.c | 202 --------- arch/arm/mach-omap2/Makefile | 3 - arch/arm/mach-omap2/devices.c | 4 +- arch/arm/mach-omap2/mailbox.c | 358 ---------------- arch/arm/plat-omap/Kconfig | 16 - arch/arm/plat-omap/Makefile | 3 - arch/arm/plat-omap/include/plat/mailbox.h | 105 ----- arch/arm/plat-omap/mailbox.c | 435 ------------------- drivers/mailbox/Kconfig | 34 ++ drivers/mailbox/Makefile | 6 + drivers/mailbox/mailbox-omap1.c | 203 +++++++++ drivers/mailbox/mailbox-omap2.c | 358 ++++++++++++++++ drivers/mailbox/omap-mailbox.c | 469 +++++++++++++++++++++ drivers/mailbox/omap-mbox.h | 67 +++ drivers/remoteproc/Kconfig | 3 +- drivers/remoteproc/omap_remoteproc.c | 2 +- drivers/staging/tidspbridge/Kconfig | 3 +- .../tidspbridge/include/dspbridge/host_os.h | 2 +- include/linux/omap-mailbox.h | 29 ++ 21 files changed, 1176 insertions(+), 1133 deletions(-) delete mode 100644 arch/arm/mach-omap1/mailbox.c delete mode 100644 arch/arm/mach-omap2/mailbox.c delete mode 100644 arch/arm/plat-omap/include/plat/mailbox.h delete mode 100644 arch/arm/plat-omap/mailbox.c create mode 100644 drivers/mailbox/mailbox-omap1.c create mode 100644 drivers/mailbox/mailbox-omap2.c create mode 100644 drivers/mailbox/omap-mailbox.c create mode 100644 drivers/mailbox/omap-mbox.h create mode 100644 include/linux/omap-mailbox.h diff --git a/arch/arm/configs/omap1_defconfig b/arch/arm/configs/omap1_defconfig index 9940f7b4e438..d74edbad18fc 100644 --- a/arch/arm/configs/omap1_defconfig +++ b/arch/arm/configs/omap1_defconfig @@ -26,7 +26,8 @@ CONFIG_ARCH_OMAP=y CONFIG_ARCH_OMAP1=y CONFIG_OMAP_RESET_CLOCKS=y # CONFIG_OMAP_MUX is not set -CONFIG_OMAP_MBOX_FWK=y +CONFIG_MAILBOX=y +CONFIG_OMAP1_MBOX=y CONFIG_OMAP_32K_TIMER=y CONFIG_OMAP_DM_TIMER=y CONFIG_ARCH_OMAP730=y diff --git a/arch/arm/mach-omap1/Makefile b/arch/arm/mach-omap1/Makefile index 222d58c0ae76..3889b6cd211e 100644 --- a/arch/arm/mach-omap1/Makefile +++ b/arch/arm/mach-omap1/Makefile @@ -19,10 +19,6 @@ obj-$(CONFIG_ARCH_OMAP16XX) += ocpi.o # Power Management obj-$(CONFIG_PM) += pm.o sleep.o -# DSP -obj-$(CONFIG_OMAP_MBOX_FWK) += mailbox_mach.o -mailbox_mach-objs := mailbox.o - i2c-omap-$(CONFIG_I2C_OMAP) := i2c.o obj-y += $(i2c-omap-m) $(i2c-omap-y) diff --git a/arch/arm/mach-omap1/mailbox.c b/arch/arm/mach-omap1/mailbox.c deleted file mode 100644 index 7246a5258292..000000000000 --- a/arch/arm/mach-omap1/mailbox.c +++ /dev/null @@ -1,202 +0,0 @@ -/* - * Mailbox reservation modules for OMAP1 - * - * Copyright (C) 2006-2009 Nokia Corporation - * Written by: Hiroshi DOYU - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ - -#include -#include -#include -#include -#include - -#define MAILBOX_ARM2DSP1 0x00 -#define MAILBOX_ARM2DSP1b 0x04 -#define MAILBOX_DSP2ARM1 0x08 -#define MAILBOX_DSP2ARM1b 0x0c -#define MAILBOX_DSP2ARM2 0x10 -#define MAILBOX_DSP2ARM2b 0x14 -#define MAILBOX_ARM2DSP1_Flag 0x18 -#define MAILBOX_DSP2ARM1_Flag 0x1c -#define MAILBOX_DSP2ARM2_Flag 0x20 - -static void __iomem *mbox_base; - -struct omap_mbox1_fifo { - unsigned long cmd; - unsigned long data; - unsigned long flag; -}; - -struct omap_mbox1_priv { - struct omap_mbox1_fifo tx_fifo; - struct omap_mbox1_fifo rx_fifo; -}; - -static inline int mbox_read_reg(size_t ofs) -{ - return __raw_readw(mbox_base + ofs); -} - -static inline void mbox_write_reg(u32 val, size_t ofs) -{ - __raw_writew(val, mbox_base + ofs); -} - -/* msg */ -static mbox_msg_t omap1_mbox_fifo_read(struct omap_mbox *mbox) -{ - struct omap_mbox1_fifo *fifo = - &((struct omap_mbox1_priv *)mbox->priv)->rx_fifo; - mbox_msg_t msg; - - msg = mbox_read_reg(fifo->data); - msg |= ((mbox_msg_t) mbox_read_reg(fifo->cmd)) << 16; - - return msg; -} - -static void -omap1_mbox_fifo_write(struct omap_mbox *mbox, mbox_msg_t msg) -{ - struct omap_mbox1_fifo *fifo = - &((struct omap_mbox1_priv *)mbox->priv)->tx_fifo; - - mbox_write_reg(msg & 0xffff, fifo->data); - mbox_write_reg(msg >> 16, fifo->cmd); -} - -static int omap1_mbox_fifo_empty(struct omap_mbox *mbox) -{ - return 0; -} - -static int omap1_mbox_fifo_full(struct omap_mbox *mbox) -{ - struct omap_mbox1_fifo *fifo = - &((struct omap_mbox1_priv *)mbox->priv)->rx_fifo; - - return mbox_read_reg(fifo->flag); -} - -/* irq */ -static void -omap1_mbox_enable_irq(struct omap_mbox *mbox, omap_mbox_irq_t irq) -{ - if (irq == IRQ_RX) - enable_irq(mbox->irq); -} - -static void -omap1_mbox_disable_irq(struct omap_mbox *mbox, omap_mbox_irq_t irq) -{ - if (irq == IRQ_RX) - disable_irq(mbox->irq); -} - -static int -omap1_mbox_is_irq(struct omap_mbox *mbox, omap_mbox_irq_t irq) -{ - if (irq == IRQ_TX) - return 0; - return 1; -} - -static struct omap_mbox_ops omap1_mbox_ops = { - .type = OMAP_MBOX_TYPE1, - .fifo_read = omap1_mbox_fifo_read, - .fifo_write = omap1_mbox_fifo_write, - .fifo_empty = omap1_mbox_fifo_empty, - .fifo_full = omap1_mbox_fifo_full, - .enable_irq = omap1_mbox_enable_irq, - .disable_irq = omap1_mbox_disable_irq, - .is_irq = omap1_mbox_is_irq, -}; - -/* FIXME: the following struct should be created automatically by the user id */ - -/* DSP */ -static struct omap_mbox1_priv omap1_mbox_dsp_priv = { - .tx_fifo = { - .cmd = MAILBOX_ARM2DSP1b, - .data = MAILBOX_ARM2DSP1, - .flag = MAILBOX_ARM2DSP1_Flag, - }, - .rx_fifo = { - .cmd = MAILBOX_DSP2ARM1b, - .data = MAILBOX_DSP2ARM1, - .flag = MAILBOX_DSP2ARM1_Flag, - }, -}; - -static struct omap_mbox mbox_dsp_info = { - .name = "dsp", - .ops = &omap1_mbox_ops, - .priv = &omap1_mbox_dsp_priv, -}; - -static struct omap_mbox *omap1_mboxes[] = { &mbox_dsp_info, NULL }; - -static int omap1_mbox_probe(struct platform_device *pdev) -{ - struct resource *mem; - int ret; - struct omap_mbox **list; - - list = omap1_mboxes; - list[0]->irq = platform_get_irq_byname(pdev, "dsp"); - - mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!mem) - return -ENOENT; - - mbox_base = ioremap(mem->start, resource_size(mem)); - if (!mbox_base) - return -ENOMEM; - - ret = omap_mbox_register(&pdev->dev, list); - if (ret) { - iounmap(mbox_base); - return ret; - } - - return 0; -} - -static int omap1_mbox_remove(struct platform_device *pdev) -{ - omap_mbox_unregister(); - iounmap(mbox_base); - return 0; -} - -static struct platform_driver omap1_mbox_driver = { - .probe = omap1_mbox_probe, - .remove = omap1_mbox_remove, - .driver = { - .name = "omap-mailbox", - }, -}; - -static int __init omap1_mbox_init(void) -{ - return platform_driver_register(&omap1_mbox_driver); -} - -static void __exit omap1_mbox_exit(void) -{ - platform_driver_unregister(&omap1_mbox_driver); -} - -module_init(omap1_mbox_init); -module_exit(omap1_mbox_exit); - -MODULE_LICENSE("GPL v2"); -MODULE_DESCRIPTION("omap mailbox: omap1 architecture specific functions"); -MODULE_AUTHOR("Hiroshi DOYU "); -MODULE_ALIAS("platform:omap1-mailbox"); diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index 55a9d6777683..f2d19af051eb 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -203,9 +203,6 @@ obj-$(CONFIG_ARCH_OMAP4) += omap_hwmod_44xx_data.o obj-$(CONFIG_OMAP3_EMU) += emu.o obj-$(CONFIG_HW_PERF_EVENTS) += pmu.o -obj-$(CONFIG_OMAP_MBOX_FWK) += mailbox_mach.o -mailbox_mach-objs := mailbox.o - iommu-$(CONFIG_OMAP_IOMMU) := omap-iommu.o obj-y += $(iommu-m) $(iommu-y) diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index 4c97a86115e6..73762accd128 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -328,7 +328,7 @@ int __init omap4_keyboard_init(struct omap4_keypad_platform_data return 0; } -#if defined(CONFIG_OMAP_MBOX_FWK) || defined(CONFIG_OMAP_MBOX_FWK_MODULE) +#if defined(CONFIG_OMAP2PLUS_MBOX) || defined(CONFIG_OMAP2PLUS_MBOX_MODULE) static inline void __init omap_init_mbox(void) { struct omap_hwmod *oh; @@ -352,7 +352,7 @@ static inline void __init omap_init_mbox(void) } #else static inline void omap_init_mbox(void) { } -#endif /* CONFIG_OMAP_MBOX_FWK */ +#endif /* CONFIG_OMAP2PLUS_MBOX */ static inline void omap_init_sti(void) {} diff --git a/arch/arm/mach-omap2/mailbox.c b/arch/arm/mach-omap2/mailbox.c deleted file mode 100644 index de21198d54ff..000000000000 --- a/arch/arm/mach-omap2/mailbox.c +++ /dev/null @@ -1,358 +0,0 @@ -/* - * Mailbox reservation modules for OMAP2/3 - * - * Copyright (C) 2006-2009 Nokia Corporation - * Written by: Hiroshi DOYU - * and Paul Mundt - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ - -#include -#include -#include -#include -#include -#include -#include -#include - -#include - -#define MAILBOX_REVISION 0x000 -#define MAILBOX_MESSAGE(m) (0x040 + 4 * (m)) -#define MAILBOX_FIFOSTATUS(m) (0x080 + 4 * (m)) -#define MAILBOX_MSGSTATUS(m) (0x0c0 + 4 * (m)) -#define MAILBOX_IRQSTATUS(u) (0x100 + 8 * (u)) -#define MAILBOX_IRQENABLE(u) (0x104 + 8 * (u)) - -#define OMAP4_MAILBOX_IRQSTATUS(u) (0x104 + 0x10 * (u)) -#define OMAP4_MAILBOX_IRQENABLE(u) (0x108 + 0x10 * (u)) -#define OMAP4_MAILBOX_IRQENABLE_CLR(u) (0x10c + 0x10 * (u)) - -#define MAILBOX_IRQ_NEWMSG(m) (1 << (2 * (m))) -#define MAILBOX_IRQ_NOTFULL(m) (1 << (2 * (m) + 1)) - -#define MBOX_REG_SIZE 0x120 - -#define OMAP4_MBOX_REG_SIZE 0x130 - -#define MBOX_NR_REGS (MBOX_REG_SIZE / sizeof(u32)) -#define OMAP4_MBOX_NR_REGS (OMAP4_MBOX_REG_SIZE / sizeof(u32)) - -static void __iomem *mbox_base; - -struct omap_mbox2_fifo { - unsigned long msg; - unsigned long fifo_stat; - unsigned long msg_stat; -}; - -struct omap_mbox2_priv { - struct omap_mbox2_fifo tx_fifo; - struct omap_mbox2_fifo rx_fifo; - unsigned long irqenable; - unsigned long irqstatus; - u32 newmsg_bit; - u32 notfull_bit; - u32 ctx[OMAP4_MBOX_NR_REGS]; - unsigned long irqdisable; - u32 intr_type; -}; - -static inline unsigned int mbox_read_reg(size_t ofs) -{ - return __raw_readl(mbox_base + ofs); -} - -static inline void mbox_write_reg(u32 val, size_t ofs) -{ - __raw_writel(val, mbox_base + ofs); -} - -/* Mailbox H/W preparations */ -static int omap2_mbox_startup(struct omap_mbox *mbox) -{ - u32 l; - - pm_runtime_enable(mbox->dev->parent); - pm_runtime_get_sync(mbox->dev->parent); - - l = mbox_read_reg(MAILBOX_REVISION); - pr_debug("omap mailbox rev %d.%d\n", (l & 0xf0) >> 4, (l & 0x0f)); - - return 0; -} - -static void omap2_mbox_shutdown(struct omap_mbox *mbox) -{ - pm_runtime_put_sync(mbox->dev->parent); - pm_runtime_disable(mbox->dev->parent); -} - -/* Mailbox FIFO handle functions */ -static mbox_msg_t omap2_mbox_fifo_read(struct omap_mbox *mbox) -{ - struct omap_mbox2_fifo *fifo = - &((struct omap_mbox2_priv *)mbox->priv)->rx_fifo; - return (mbox_msg_t) mbox_read_reg(fifo->msg); -} - -static void omap2_mbox_fifo_write(struct omap_mbox *mbox, mbox_msg_t msg) -{ - struct omap_mbox2_fifo *fifo = - &((struct omap_mbox2_priv *)mbox->priv)->tx_fifo; - mbox_write_reg(msg, fifo->msg); -} - -static int omap2_mbox_fifo_empty(struct omap_mbox *mbox) -{ - struct omap_mbox2_fifo *fifo = - &((struct omap_mbox2_priv *)mbox->priv)->rx_fifo; - return (mbox_read_reg(fifo->msg_stat) == 0); -} - -static int omap2_mbox_fifo_full(struct omap_mbox *mbox) -{ - struct omap_mbox2_fifo *fifo = - &((struct omap_mbox2_priv *)mbox->priv)->tx_fifo; - return mbox_read_reg(fifo->fifo_stat); -} - -/* Mailbox IRQ handle functions */ -static void omap2_mbox_enable_irq(struct omap_mbox *mbox, omap_mbox_irq_t irq) -{ - struct omap_mbox2_priv *p = mbox->priv; - u32 l, bit = (irq == IRQ_TX) ? p->notfull_bit : p->newmsg_bit; - - l = mbox_read_reg(p->irqenable); - l |= bit; - mbox_write_reg(l, p->irqenable); -} - -static void omap2_mbox_disable_irq(struct omap_mbox *mbox, omap_mbox_irq_t irq) -{ - struct omap_mbox2_priv *p = mbox->priv; - u32 bit = (irq == IRQ_TX) ? p->notfull_bit : p->newmsg_bit; - - /* - * Read and update the interrupt configuration register for pre-OMAP4. - * OMAP4 and later SoCs have a dedicated interrupt disabling register. - */ - if (!p->intr_type) - bit = mbox_read_reg(p->irqdisable) & ~bit; - - mbox_write_reg(bit, p->irqdisable); -} - -static void omap2_mbox_ack_irq(struct omap_mbox *mbox, omap_mbox_irq_t irq) -{ - struct omap_mbox2_priv *p = mbox->priv; - u32 bit = (irq == IRQ_TX) ? p->notfull_bit : p->newmsg_bit; - - mbox_write_reg(bit, p->irqstatus); - - /* Flush posted write for irq status to avoid spurious interrupts */ - mbox_read_reg(p->irqstatus); -} - -static int omap2_mbox_is_irq(struct omap_mbox *mbox, omap_mbox_irq_t irq) -{ - struct omap_mbox2_priv *p = mbox->priv; - u32 bit = (irq == IRQ_TX) ? p->notfull_bit : p->newmsg_bit; - u32 enable = mbox_read_reg(p->irqenable); - u32 status = mbox_read_reg(p->irqstatus); - - return (int)(enable & status & bit); -} - -static void omap2_mbox_save_ctx(struct omap_mbox *mbox) -{ - int i; - struct omap_mbox2_priv *p = mbox->priv; - int nr_regs; - - if (p->intr_type) - nr_regs = OMAP4_MBOX_NR_REGS; - else - nr_regs = MBOX_NR_REGS; - for (i = 0; i < nr_regs; i++) { - p->ctx[i] = mbox_read_reg(i * sizeof(u32)); - - dev_dbg(mbox->dev, "%s: [%02x] %08x\n", __func__, - i, p->ctx[i]); - } -} - -static void omap2_mbox_restore_ctx(struct omap_mbox *mbox) -{ - int i; - struct omap_mbox2_priv *p = mbox->priv; - int nr_regs; - - if (p->intr_type) - nr_regs = OMAP4_MBOX_NR_REGS; - else - nr_regs = MBOX_NR_REGS; - for (i = 0; i < nr_regs; i++) { - mbox_write_reg(p->ctx[i], i * sizeof(u32)); - - dev_dbg(mbox->dev, "%s: [%02x] %08x\n", __func__, - i, p->ctx[i]); - } -} - -static struct omap_mbox_ops omap2_mbox_ops = { - .type = OMAP_MBOX_TYPE2, - .startup = omap2_mbox_startup, - .shutdown = omap2_mbox_shutdown, - .fifo_read = omap2_mbox_fifo_read, - .fifo_write = omap2_mbox_fifo_write, - .fifo_empty = omap2_mbox_fifo_empty, - .fifo_full = omap2_mbox_fifo_full, - .enable_irq = omap2_mbox_enable_irq, - .disable_irq = omap2_mbox_disable_irq, - .ack_irq = omap2_mbox_ack_irq, - .is_irq = omap2_mbox_is_irq, - .save_ctx = omap2_mbox_save_ctx, - .restore_ctx = omap2_mbox_restore_ctx, -}; - -static int omap2_mbox_probe(struct platform_device *pdev) -{ - struct resource *mem; - int ret; - struct omap_mbox **list, *mbox, *mboxblk; - struct omap_mbox2_priv *priv, *privblk; - struct omap_mbox_pdata *pdata = pdev->dev.platform_data; - struct omap_mbox_dev_info *info; - int i; - - if (!pdata || !pdata->info_cnt || !pdata->info) { - pr_err("%s: platform not supported\n", __func__); - return -ENODEV; - } - - /* allocate one extra for marking end of list */ - list = kzalloc((pdata->info_cnt + 1) * sizeof(*list), GFP_KERNEL); - if (!list) - return -ENOMEM; - - mboxblk = mbox = kzalloc(pdata->info_cnt * sizeof(*mbox), GFP_KERNEL); - if (!mboxblk) { - ret = -ENOMEM; - goto free_list; - } - - privblk = priv = kzalloc(pdata->info_cnt * sizeof(*priv), GFP_KERNEL); - if (!privblk) { - ret = -ENOMEM; - goto free_mboxblk; - } - - info = pdata->info; - for (i = 0; i < pdata->info_cnt; i++, info++, priv++) { - priv->tx_fifo.msg = MAILBOX_MESSAGE(info->tx_id); - priv->tx_fifo.fifo_stat = MAILBOX_FIFOSTATUS(info->tx_id); - priv->rx_fifo.msg = MAILBOX_MESSAGE(info->rx_id); - priv->rx_fifo.msg_stat = MAILBOX_MSGSTATUS(info->rx_id); - priv->notfull_bit = MAILBOX_IRQ_NOTFULL(info->tx_id); - priv->newmsg_bit = MAILBOX_IRQ_NEWMSG(info->rx_id); - if (pdata->intr_type) { - priv->irqenable = OMAP4_MAILBOX_IRQENABLE(info->usr_id); - priv->irqstatus = OMAP4_MAILBOX_IRQSTATUS(info->usr_id); - priv->irqdisable = - OMAP4_MAILBOX_IRQENABLE_CLR(info->usr_id); - } else { - priv->irqenable = MAILBOX_IRQENABLE(info->usr_id); - priv->irqstatus = MAILBOX_IRQSTATUS(info->usr_id); - priv->irqdisable = MAILBOX_IRQENABLE(info->usr_id); - } - priv->intr_type = pdata->intr_type; - - mbox->priv = priv; - mbox->name = info->name; - mbox->ops = &omap2_mbox_ops; - mbox->irq = platform_get_irq(pdev, info->irq_id); - if (mbox->irq < 0) { - ret = mbox->irq; - goto free_privblk; - } - list[i] = mbox++; - } - - mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!mem) { - ret = -ENOENT; - goto free_privblk; - } - - mbox_base = ioremap(mem->start, resource_size(mem)); - if (!mbox_base) { - ret = -ENOMEM; - goto free_privblk; - } - - ret = omap_mbox_register(&pdev->dev, list); - if (ret) - goto unmap_mbox; - platform_set_drvdata(pdev, list); - - return 0; - -unmap_mbox: - iounmap(mbox_base); -free_privblk: - kfree(privblk); -free_mboxblk: - kfree(mboxblk); -free_list: - kfree(list); - return ret; -} - -static int omap2_mbox_remove(struct platform_device *pdev) -{ - struct omap_mbox2_priv *privblk; - struct omap_mbox **list = platform_get_drvdata(pdev); - struct omap_mbox *mboxblk = list[0]; - - privblk = mboxblk->priv; - omap_mbox_unregister(); - iounmap(mbox_base); - kfree(privblk); - kfree(mboxblk); - kfree(list); - platform_set_drvdata(pdev, NULL); - - return 0; -} - -static struct platform_driver omap2_mbox_driver = { - .probe = omap2_mbox_probe, - .remove = omap2_mbox_remove, - .driver = { - .name = "omap-mailbox", - }, -}; - -static int __init omap2_mbox_init(void) -{ - return platform_driver_register(&omap2_mbox_driver); -} - -static void __exit omap2_mbox_exit(void) -{ - platform_driver_unregister(&omap2_mbox_driver); -} - -module_init(omap2_mbox_init); -module_exit(omap2_mbox_exit); - -MODULE_LICENSE("GPL v2"); -MODULE_DESCRIPTION("omap mailbox: omap2/3/4 architecture specific functions"); -MODULE_AUTHOR("Hiroshi DOYU "); -MODULE_AUTHOR("Paul Mundt"); -MODULE_ALIAS("platform:omap2-mailbox"); diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig index ce66eb9be481..f82bae2171eb 100644 --- a/arch/arm/plat-omap/Kconfig +++ b/arch/arm/plat-omap/Kconfig @@ -86,22 +86,6 @@ config OMAP_MUX_WARNINGS to change the pin multiplexing setup. When there are no warnings printed, it's safe to deselect OMAP_MUX for your product. -config OMAP_MBOX_FWK - tristate "Mailbox framework support" - depends on ARCH_OMAP && !ARCH_MULTIPLATFORM - help - Say Y here if you want to use OMAP Mailbox framework support for - DSP, IVA1.0 and IVA2 in OMAP1/2/3. - -config OMAP_MBOX_KFIFO_SIZE - int "Mailbox kfifo default buffer size (bytes)" - depends on OMAP_MBOX_FWK - default 256 - help - Specify the default size of mailbox's kfifo buffers (bytes). - This can also be changed at runtime (via the mbox_kfifo_size - module parameter). - config OMAP_IOMMU_IVA2 bool diff --git a/arch/arm/plat-omap/Makefile b/arch/arm/plat-omap/Makefile index 31199417b56a..0b01b68fd033 100644 --- a/arch/arm/plat-omap/Makefile +++ b/arch/arm/plat-omap/Makefile @@ -17,6 +17,3 @@ obj-$(CONFIG_OMAP_DEBUG_LEDS) += debug-leds.o i2c-omap-$(CONFIG_I2C_OMAP) := i2c.o obj-y += $(i2c-omap-m) $(i2c-omap-y) -# OMAP mailbox framework -obj-$(CONFIG_OMAP_MBOX_FWK) += mailbox.o - diff --git a/arch/arm/plat-omap/include/plat/mailbox.h b/arch/arm/plat-omap/include/plat/mailbox.h deleted file mode 100644 index e98f7e234686..000000000000 --- a/arch/arm/plat-omap/include/plat/mailbox.h +++ /dev/null @@ -1,105 +0,0 @@ -/* mailbox.h */ - -#ifndef MAILBOX_H -#define MAILBOX_H - -#include -#include -#include -#include -#include - -typedef u32 mbox_msg_t; -struct omap_mbox; - -typedef int __bitwise omap_mbox_irq_t; -#define IRQ_TX ((__force omap_mbox_irq_t) 1) -#define IRQ_RX ((__force omap_mbox_irq_t) 2) - -typedef int __bitwise omap_mbox_type_t; -#define OMAP_MBOX_TYPE1 ((__force omap_mbox_type_t) 1) -#define OMAP_MBOX_TYPE2 ((__force omap_mbox_type_t) 2) - -struct omap_mbox_ops { - omap_mbox_type_t type; - int (*startup)(struct omap_mbox *mbox); - void (*shutdown)(struct omap_mbox *mbox); - /* fifo */ - mbox_msg_t (*fifo_read)(struct omap_mbox *mbox); - void (*fifo_write)(struct omap_mbox *mbox, mbox_msg_t msg); - int (*fifo_empty)(struct omap_mbox *mbox); - int (*fifo_full)(struct omap_mbox *mbox); - /* irq */ - void (*enable_irq)(struct omap_mbox *mbox, - omap_mbox_irq_t irq); - void (*disable_irq)(struct omap_mbox *mbox, - omap_mbox_irq_t irq); - void (*ack_irq)(struct omap_mbox *mbox, omap_mbox_irq_t irq); - int (*is_irq)(struct omap_mbox *mbox, omap_mbox_irq_t irq); - /* ctx */ - void (*save_ctx)(struct omap_mbox *mbox); - void (*restore_ctx)(struct omap_mbox *mbox); -}; - -struct omap_mbox_queue { - spinlock_t lock; - struct kfifo fifo; - struct work_struct work; - struct tasklet_struct tasklet; - struct omap_mbox *mbox; - bool full; -}; - -struct omap_mbox { - const char *name; - unsigned int irq; - struct omap_mbox_queue *txq, *rxq; - struct omap_mbox_ops *ops; - struct device *dev; - void *priv; - int use_count; - struct blocking_notifier_head notifier; -}; - -int omap_mbox_msg_send(struct omap_mbox *, mbox_msg_t msg); -void omap_mbox_init_seq(struct omap_mbox *); - -struct omap_mbox *omap_mbox_get(const char *, struct notifier_block *nb); -void omap_mbox_put(struct omap_mbox *mbox, struct notifier_block *nb); - -int omap_mbox_register(struct device *parent, struct omap_mbox **); -int omap_mbox_unregister(void); - -static inline void omap_mbox_save_ctx(struct omap_mbox *mbox) -{ - if (!mbox->ops->save_ctx) { - dev_err(mbox->dev, "%s:\tno save\n", __func__); - return; - } - - mbox->ops->save_ctx(mbox); -} - -static inline void omap_mbox_restore_ctx(struct omap_mbox *mbox) -{ - if (!mbox->ops->restore_ctx) { - dev_err(mbox->dev, "%s:\tno restore\n", __func__); - return; - } - - mbox->ops->restore_ctx(mbox); -} - -static inline void omap_mbox_enable_irq(struct omap_mbox *mbox, - omap_mbox_irq_t irq) -{ - mbox->ops->enable_irq(mbox, irq); -} - -static inline void omap_mbox_disable_irq(struct omap_mbox *mbox, - omap_mbox_irq_t irq) -{ - mbox->ops->disable_irq(mbox, irq); -} - -#endif /* MAILBOX_H */ diff --git a/arch/arm/plat-omap/mailbox.c b/arch/arm/plat-omap/mailbox.c deleted file mode 100644 index f65eaf00fce6..000000000000 --- a/arch/arm/plat-omap/mailbox.c +++ /dev/null @@ -1,435 +0,0 @@ -/* - * OMAP mailbox driver - * - * Copyright (C) 2006-2009 Nokia Corporation. All rights reserved. - * - * Contact: Hiroshi DOYU - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA - * 02110-1301 USA - * - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include - -static struct omap_mbox **mboxes; - -static int mbox_configured; -static DEFINE_MUTEX(mbox_configured_lock); - -static unsigned int mbox_kfifo_size = CONFIG_OMAP_MBOX_KFIFO_SIZE; -module_param(mbox_kfifo_size, uint, S_IRUGO); -MODULE_PARM_DESC(mbox_kfifo_size, "Size of omap's mailbox kfifo (bytes)"); - -/* Mailbox FIFO handle functions */ -static inline mbox_msg_t mbox_fifo_read(struct omap_mbox *mbox) -{ - return mbox->ops->fifo_read(mbox); -} -static inline void mbox_fifo_write(struct omap_mbox *mbox, mbox_msg_t msg) -{ - mbox->ops->fifo_write(mbox, msg); -} -static inline int mbox_fifo_empty(struct omap_mbox *mbox) -{ - return mbox->ops->fifo_empty(mbox); -} -static inline int mbox_fifo_full(struct omap_mbox *mbox) -{ - return mbox->ops->fifo_full(mbox); -} - -/* Mailbox IRQ handle functions */ -static inline void ack_mbox_irq(struct omap_mbox *mbox, omap_mbox_irq_t irq) -{ - if (mbox->ops->ack_irq) - mbox->ops->ack_irq(mbox, irq); -} -static inline int is_mbox_irq(struct omap_mbox *mbox, omap_mbox_irq_t irq) -{ - return mbox->ops->is_irq(mbox, irq); -} - -/* - * message sender - */ -static int __mbox_poll_for_space(struct omap_mbox *mbox) -{ - int ret = 0, i = 1000; - - while (mbox_fifo_full(mbox)) { - if (mbox->ops->type == OMAP_MBOX_TYPE2) - return -1; - if (--i == 0) - return -1; - udelay(1); - } - return ret; -} - -int omap_mbox_msg_send(struct omap_mbox *mbox, mbox_msg_t msg) -{ - struct omap_mbox_queue *mq = mbox->txq; - int ret = 0, len; - - spin_lock_bh(&mq->lock); - - if (kfifo_avail(&mq->fifo) < sizeof(msg)) { - ret = -ENOMEM; - goto out; - } - - if (kfifo_is_empty(&mq->fifo) && !__mbox_poll_for_space(mbox)) { - mbox_fifo_write(mbox, msg); - goto out; - } - - len = kfifo_in(&mq->fifo, (unsigned char *)&msg, sizeof(msg)); - WARN_ON(len != sizeof(msg)); - - tasklet_schedule(&mbox->txq->tasklet); - -out: - spin_unlock_bh(&mq->lock); - return ret; -} -EXPORT_SYMBOL(omap_mbox_msg_send); - -static void mbox_tx_tasklet(unsigned long tx_data) -{ - struct omap_mbox *mbox = (struct omap_mbox *)tx_data; - struct omap_mbox_queue *mq = mbox->txq; - mbox_msg_t msg; - int ret; - - while (kfifo_len(&mq->fifo)) { - if (__mbox_poll_for_space(mbox)) { - omap_mbox_enable_irq(mbox, IRQ_TX); - break; - } - - ret = kfifo_out(&mq->fifo, (unsigned char *)&msg, - sizeof(msg)); - WARN_ON(ret != sizeof(msg)); - - mbox_fifo_write(mbox, msg); - } -} - -/* - * Message receiver(workqueue) - */ -static void mbox_rx_work(struct work_struct *work) -{ - struct omap_mbox_queue *mq = - container_of(work, struct omap_mbox_queue, work); - mbox_msg_t msg; - int len; - - while (kfifo_len(&mq->fifo) >= sizeof(msg)) { - len = kfifo_out(&mq->fifo, (unsigned char *)&msg, sizeof(msg)); - WARN_ON(len != sizeof(msg)); - - blocking_notifier_call_chain(&mq->mbox->notifier, len, - (void *)msg); - spin_lock_irq(&mq->lock); - if (mq->full) { - mq->full = false; - omap_mbox_enable_irq(mq->mbox, IRQ_RX); - } - spin_unlock_irq(&mq->lock); - } -} - -/* - * Mailbox interrupt handler - */ -static void __mbox_tx_interrupt(struct omap_mbox *mbox) -{ - omap_mbox_disable_irq(mbox, IRQ_TX); - ack_mbox_irq(mbox, IRQ_TX); - tasklet_schedule(&mbox->txq->tasklet); -} - -static void __mbox_rx_interrupt(struct omap_mbox *mbox) -{ - struct omap_mbox_queue *mq = mbox->rxq; - mbox_msg_t msg; - int len; - - while (!mbox_fifo_empty(mbox)) { - if (unlikely(kfifo_avail(&mq->fifo) < sizeof(msg))) { - omap_mbox_disable_irq(mbox, IRQ_RX); - mq->full = true; - goto nomem; - } - - msg = mbox_fifo_read(mbox); - - len = kfifo_in(&mq->fifo, (unsigned char *)&msg, sizeof(msg)); - WARN_ON(len != sizeof(msg)); - - if (mbox->ops->type == OMAP_MBOX_TYPE1) - break; - } - - /* no more messages in the fifo. clear IRQ source. */ - ack_mbox_irq(mbox, IRQ_RX); -nomem: - schedule_work(&mbox->rxq->work); -} - -static irqreturn_t mbox_interrupt(int irq, void *p) -{ - struct omap_mbox *mbox = p; - - if (is_mbox_irq(mbox, IRQ_TX)) - __mbox_tx_interrupt(mbox); - - if (is_mbox_irq(mbox, IRQ_RX)) - __mbox_rx_interrupt(mbox); - - return IRQ_HANDLED; -} - -static struct omap_mbox_queue *mbox_queue_alloc(struct omap_mbox *mbox, - void (*work) (struct work_struct *), - void (*tasklet)(unsigned long)) -{ - struct omap_mbox_queue *mq; - - mq = kzalloc(sizeof(struct omap_mbox_queue), GFP_KERNEL); - if (!mq) - return NULL; - - spin_lock_init(&mq->lock); - - if (kfifo_alloc(&mq->fifo, mbox_kfifo_size, GFP_KERNEL)) - goto error; - - if (work) - INIT_WORK(&mq->work, work); - - if (tasklet) - tasklet_init(&mq->tasklet, tasklet, (unsigned long)mbox); - return mq; -error: - kfree(mq); - return NULL; -} - -static void mbox_queue_free(struct omap_mbox_queue *q) -{ - kfifo_free(&q->fifo); - kfree(q); -} - -static int omap_mbox_startup(struct omap_mbox *mbox) -{ - int ret = 0; - struct omap_mbox_queue *mq; - - mutex_lock(&mbox_configured_lock); - if (!mbox_configured++) { - if (likely(mbox->ops->startup)) { - ret = mbox->ops->startup(mbox); - if (unlikely(ret)) - goto fail_startup; - } else - goto fail_startup; - } - - if (!mbox->use_count++) { - mq = mbox_queue_alloc(mbox, NULL, mbox_tx_tasklet); - if (!mq) { - ret = -ENOMEM; - goto fail_alloc_txq; - } - mbox->txq = mq; - - mq = mbox_queue_alloc(mbox, mbox_rx_work, NULL); - if (!mq) { - ret = -ENOMEM; - goto fail_alloc_rxq; - } - mbox->rxq = mq; - mq->mbox = mbox; - ret = request_irq(mbox->irq, mbox_interrupt, IRQF_SHARED, - mbox->name, mbox); - if (unlikely(ret)) { - pr_err("failed to register mailbox interrupt:%d\n", - ret); - goto fail_request_irq; - } - - omap_mbox_enable_irq(mbox, IRQ_RX); - } - mutex_unlock(&mbox_configured_lock); - return 0; - -fail_request_irq: - mbox_queue_free(mbox->rxq); -fail_alloc_rxq: - mbox_queue_free(mbox->txq); -fail_alloc_txq: - if (mbox->ops->shutdown) - mbox->ops->shutdown(mbox); - mbox->use_count--; -fail_startup: - mbox_configured--; - mutex_unlock(&mbox_configured_lock); - return ret; -} - -static void omap_mbox_fini(struct omap_mbox *mbox) -{ - mutex_lock(&mbox_configured_lock); - - if (!--mbox->use_count) { - omap_mbox_disable_irq(mbox, IRQ_RX); - free_irq(mbox->irq, mbox); - tasklet_kill(&mbox->txq->tasklet); - flush_work(&mbox->rxq->work); - mbox_queue_free(mbox->txq); - mbox_queue_free(mbox->rxq); - } - - if (likely(mbox->ops->shutdown)) { - if (!--mbox_configured) - mbox->ops->shutdown(mbox); - } - - mutex_unlock(&mbox_configured_lock); -} - -struct omap_mbox *omap_mbox_get(const char *name, struct notifier_block *nb) -{ - struct omap_mbox *_mbox, *mbox = NULL; - int i, ret; - - if (!mboxes) - return ERR_PTR(-EINVAL); - - for (i = 0; (_mbox = mboxes[i]); i++) { - if (!strcmp(_mbox->name, name)) { - mbox = _mbox; - break; - } - } - - if (!mbox) - return ERR_PTR(-ENOENT); - - if (nb) - blocking_notifier_chain_register(&mbox->notifier, nb); - - ret = omap_mbox_startup(mbox); - if (ret) { - blocking_notifier_chain_unregister(&mbox->notifier, nb); - return ERR_PTR(-ENODEV); - } - - return mbox; -} -EXPORT_SYMBOL(omap_mbox_get); - -void omap_mbox_put(struct omap_mbox *mbox, struct notifier_block *nb) -{ - blocking_notifier_chain_unregister(&mbox->notifier, nb); - omap_mbox_fini(mbox); -} -EXPORT_SYMBOL(omap_mbox_put); - -static struct class omap_mbox_class = { .name = "mbox", }; - -int omap_mbox_register(struct device *parent, struct omap_mbox **list) -{ - int ret; - int i; - - mboxes = list; - if (!mboxes) - return -EINVAL; - - for (i = 0; mboxes[i]; i++) { - struct omap_mbox *mbox = mboxes[i]; - mbox->dev = device_create(&omap_mbox_class, - parent, 0, mbox, "%s", mbox->name); - if (IS_ERR(mbox->dev)) { - ret = PTR_ERR(mbox->dev); - goto err_out; - } - - BLOCKING_INIT_NOTIFIER_HEAD(&mbox->notifier); - } - return 0; - -err_out: - while (i--) - device_unregister(mboxes[i]->dev); - return ret; -} -EXPORT_SYMBOL(omap_mbox_register); - -int omap_mbox_unregister(void) -{ - int i; - - if (!mboxes) - return -EINVAL; - - for (i = 0; mboxes[i]; i++) - device_unregister(mboxes[i]->dev); - mboxes = NULL; - return 0; -} -EXPORT_SYMBOL(omap_mbox_unregister); - -static int __init omap_mbox_init(void) -{ - int err; - - err = class_register(&omap_mbox_class); - if (err) - return err; - - /* kfifo size sanity check: alignment and minimal size */ - mbox_kfifo_size = ALIGN(mbox_kfifo_size, sizeof(mbox_msg_t)); - mbox_kfifo_size = max_t(unsigned int, mbox_kfifo_size, - sizeof(mbox_msg_t)); - - return 0; -} -subsys_initcall(omap_mbox_init); - -static void __exit omap_mbox_exit(void) -{ - class_unregister(&omap_mbox_class); -} -module_exit(omap_mbox_exit); - -MODULE_LICENSE("GPL v2"); -MODULE_DESCRIPTION("omap mailbox: interrupt driven messaging"); -MODULE_AUTHOR("Toshihiro Kobayashi"); -MODULE_AUTHOR("Hiroshi DOYU"); diff --git a/drivers/mailbox/Kconfig b/drivers/mailbox/Kconfig index 9545c9f03809..c8b5c13bcd05 100644 --- a/drivers/mailbox/Kconfig +++ b/drivers/mailbox/Kconfig @@ -16,4 +16,38 @@ config PL320_MBOX Management Engine, primarily for cpufreq. Say Y here if you want to use the PL320 IPCM support. +config OMAP_MBOX + tristate + help + This option is selected by any OMAP architecture specific mailbox + driver such as CONFIG_OMAP1_MBOX or CONFIG_OMAP2PLUS_MBOX. This + enables the common OMAP mailbox framework code. + +config OMAP1_MBOX + tristate "OMAP1 Mailbox framework support" + depends on ARCH_OMAP1 + select OMAP_MBOX + help + Mailbox implementation for OMAP chips with hardware for + interprocessor communication involving DSP in OMAP1. Say Y here + if you want to use OMAP1 Mailbox framework support. + +config OMAP2PLUS_MBOX + tristate "OMAP2+ Mailbox framework support" + depends on ARCH_OMAP2PLUS + select OMAP_MBOX + help + Mailbox implementation for OMAP family chips with hardware for + interprocessor communication involving DSP, IVA1.0 and IVA2 in + OMAP2/3; or IPU, IVA HD and DSP in OMAP4/5. Say Y here if you + want to use OMAP2+ Mailbox framework support. + +config OMAP_MBOX_KFIFO_SIZE + int "Mailbox kfifo default buffer size (bytes)" + depends on OMAP2PLUS_MBOX || OMAP1_MBOX + default 256 + help + Specify the default size of mailbox's kfifo buffers (bytes). + This can also be changed at runtime (via the mbox_kfifo_size + module parameter). endif diff --git a/drivers/mailbox/Makefile b/drivers/mailbox/Makefile index 543ad6a79505..e0facb34084a 100644 --- a/drivers/mailbox/Makefile +++ b/drivers/mailbox/Makefile @@ -1 +1,7 @@ obj-$(CONFIG_PL320_MBOX) += pl320-ipc.o + +obj-$(CONFIG_OMAP_MBOX) += omap-mailbox.o +obj-$(CONFIG_OMAP1_MBOX) += mailbox_omap1.o +mailbox_omap1-objs := mailbox-omap1.o +obj-$(CONFIG_OMAP2PLUS_MBOX) += mailbox_omap2.o +mailbox_omap2-objs := mailbox-omap2.o diff --git a/drivers/mailbox/mailbox-omap1.c b/drivers/mailbox/mailbox-omap1.c new file mode 100644 index 000000000000..9001b7633f10 --- /dev/null +++ b/drivers/mailbox/mailbox-omap1.c @@ -0,0 +1,203 @@ +/* + * Mailbox reservation modules for OMAP1 + * + * Copyright (C) 2006-2009 Nokia Corporation + * Written by: Hiroshi DOYU + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#include +#include +#include +#include + +#include "omap-mbox.h" + +#define MAILBOX_ARM2DSP1 0x00 +#define MAILBOX_ARM2DSP1b 0x04 +#define MAILBOX_DSP2ARM1 0x08 +#define MAILBOX_DSP2ARM1b 0x0c +#define MAILBOX_DSP2ARM2 0x10 +#define MAILBOX_DSP2ARM2b 0x14 +#define MAILBOX_ARM2DSP1_Flag 0x18 +#define MAILBOX_DSP2ARM1_Flag 0x1c +#define MAILBOX_DSP2ARM2_Flag 0x20 + +static void __iomem *mbox_base; + +struct omap_mbox1_fifo { + unsigned long cmd; + unsigned long data; + unsigned long flag; +}; + +struct omap_mbox1_priv { + struct omap_mbox1_fifo tx_fifo; + struct omap_mbox1_fifo rx_fifo; +}; + +static inline int mbox_read_reg(size_t ofs) +{ + return __raw_readw(mbox_base + ofs); +} + +static inline void mbox_write_reg(u32 val, size_t ofs) +{ + __raw_writew(val, mbox_base + ofs); +} + +/* msg */ +static mbox_msg_t omap1_mbox_fifo_read(struct omap_mbox *mbox) +{ + struct omap_mbox1_fifo *fifo = + &((struct omap_mbox1_priv *)mbox->priv)->rx_fifo; + mbox_msg_t msg; + + msg = mbox_read_reg(fifo->data); + msg |= ((mbox_msg_t) mbox_read_reg(fifo->cmd)) << 16; + + return msg; +} + +static void +omap1_mbox_fifo_write(struct omap_mbox *mbox, mbox_msg_t msg) +{ + struct omap_mbox1_fifo *fifo = + &((struct omap_mbox1_priv *)mbox->priv)->tx_fifo; + + mbox_write_reg(msg & 0xffff, fifo->data); + mbox_write_reg(msg >> 16, fifo->cmd); +} + +static int omap1_mbox_fifo_empty(struct omap_mbox *mbox) +{ + return 0; +} + +static int omap1_mbox_fifo_full(struct omap_mbox *mbox) +{ + struct omap_mbox1_fifo *fifo = + &((struct omap_mbox1_priv *)mbox->priv)->rx_fifo; + + return mbox_read_reg(fifo->flag); +} + +/* irq */ +static void +omap1_mbox_enable_irq(struct omap_mbox *mbox, omap_mbox_irq_t irq) +{ + if (irq == IRQ_RX) + enable_irq(mbox->irq); +} + +static void +omap1_mbox_disable_irq(struct omap_mbox *mbox, omap_mbox_irq_t irq) +{ + if (irq == IRQ_RX) + disable_irq(mbox->irq); +} + +static int +omap1_mbox_is_irq(struct omap_mbox *mbox, omap_mbox_irq_t irq) +{ + if (irq == IRQ_TX) + return 0; + return 1; +} + +static struct omap_mbox_ops omap1_mbox_ops = { + .type = OMAP_MBOX_TYPE1, + .fifo_read = omap1_mbox_fifo_read, + .fifo_write = omap1_mbox_fifo_write, + .fifo_empty = omap1_mbox_fifo_empty, + .fifo_full = omap1_mbox_fifo_full, + .enable_irq = omap1_mbox_enable_irq, + .disable_irq = omap1_mbox_disable_irq, + .is_irq = omap1_mbox_is_irq, +}; + +/* FIXME: the following struct should be created automatically by the user id */ + +/* DSP */ +static struct omap_mbox1_priv omap1_mbox_dsp_priv = { + .tx_fifo = { + .cmd = MAILBOX_ARM2DSP1b, + .data = MAILBOX_ARM2DSP1, + .flag = MAILBOX_ARM2DSP1_Flag, + }, + .rx_fifo = { + .cmd = MAILBOX_DSP2ARM1b, + .data = MAILBOX_DSP2ARM1, + .flag = MAILBOX_DSP2ARM1_Flag, + }, +}; + +static struct omap_mbox mbox_dsp_info = { + .name = "dsp", + .ops = &omap1_mbox_ops, + .priv = &omap1_mbox_dsp_priv, +}; + +static struct omap_mbox *omap1_mboxes[] = { &mbox_dsp_info, NULL }; + +static int omap1_mbox_probe(struct platform_device *pdev) +{ + struct resource *mem; + int ret; + struct omap_mbox **list; + + list = omap1_mboxes; + list[0]->irq = platform_get_irq_byname(pdev, "dsp"); + + mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!mem) + return -ENOENT; + + mbox_base = ioremap(mem->start, resource_size(mem)); + if (!mbox_base) + return -ENOMEM; + + ret = omap_mbox_register(&pdev->dev, list); + if (ret) { + iounmap(mbox_base); + return ret; + } + + return 0; +} + +static int omap1_mbox_remove(struct platform_device *pdev) +{ + omap_mbox_unregister(); + iounmap(mbox_base); + return 0; +} + +static struct platform_driver omap1_mbox_driver = { + .probe = omap1_mbox_probe, + .remove = omap1_mbox_remove, + .driver = { + .name = "omap-mailbox", + }, +}; + +static int __init omap1_mbox_init(void) +{ + return platform_driver_register(&omap1_mbox_driver); +} + +static void __exit omap1_mbox_exit(void) +{ + platform_driver_unregister(&omap1_mbox_driver); +} + +module_init(omap1_mbox_init); +module_exit(omap1_mbox_exit); + +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("omap mailbox: omap1 architecture specific functions"); +MODULE_AUTHOR("Hiroshi DOYU "); +MODULE_ALIAS("platform:omap1-mailbox"); diff --git a/drivers/mailbox/mailbox-omap2.c b/drivers/mailbox/mailbox-omap2.c new file mode 100644 index 000000000000..eba380d7b17f --- /dev/null +++ b/drivers/mailbox/mailbox-omap2.c @@ -0,0 +1,358 @@ +/* + * Mailbox reservation modules for OMAP2/3 + * + * Copyright (C) 2006-2009 Nokia Corporation + * Written by: Hiroshi DOYU + * and Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include "omap-mbox.h" + +#define MAILBOX_REVISION 0x000 +#define MAILBOX_MESSAGE(m) (0x040 + 4 * (m)) +#define MAILBOX_FIFOSTATUS(m) (0x080 + 4 * (m)) +#define MAILBOX_MSGSTATUS(m) (0x0c0 + 4 * (m)) +#define MAILBOX_IRQSTATUS(u) (0x100 + 8 * (u)) +#define MAILBOX_IRQENABLE(u) (0x104 + 8 * (u)) + +#define OMAP4_MAILBOX_IRQSTATUS(u) (0x104 + 0x10 * (u)) +#define OMAP4_MAILBOX_IRQENABLE(u) (0x108 + 0x10 * (u)) +#define OMAP4_MAILBOX_IRQENABLE_CLR(u) (0x10c + 0x10 * (u)) + +#define MAILBOX_IRQ_NEWMSG(m) (1 << (2 * (m))) +#define MAILBOX_IRQ_NOTFULL(m) (1 << (2 * (m) + 1)) + +#define MBOX_REG_SIZE 0x120 + +#define OMAP4_MBOX_REG_SIZE 0x130 + +#define MBOX_NR_REGS (MBOX_REG_SIZE / sizeof(u32)) +#define OMAP4_MBOX_NR_REGS (OMAP4_MBOX_REG_SIZE / sizeof(u32)) + +static void __iomem *mbox_base; + +struct omap_mbox2_fifo { + unsigned long msg; + unsigned long fifo_stat; + unsigned long msg_stat; +}; + +struct omap_mbox2_priv { + struct omap_mbox2_fifo tx_fifo; + struct omap_mbox2_fifo rx_fifo; + unsigned long irqenable; + unsigned long irqstatus; + u32 newmsg_bit; + u32 notfull_bit; + u32 ctx[OMAP4_MBOX_NR_REGS]; + unsigned long irqdisable; + u32 intr_type; +}; + +static inline unsigned int mbox_read_reg(size_t ofs) +{ + return __raw_readl(mbox_base + ofs); +} + +static inline void mbox_write_reg(u32 val, size_t ofs) +{ + __raw_writel(val, mbox_base + ofs); +} + +/* Mailbox H/W preparations */ +static int omap2_mbox_startup(struct omap_mbox *mbox) +{ + u32 l; + + pm_runtime_enable(mbox->dev->parent); + pm_runtime_get_sync(mbox->dev->parent); + + l = mbox_read_reg(MAILBOX_REVISION); + pr_debug("omap mailbox rev %d.%d\n", (l & 0xf0) >> 4, (l & 0x0f)); + + return 0; +} + +static void omap2_mbox_shutdown(struct omap_mbox *mbox) +{ + pm_runtime_put_sync(mbox->dev->parent); + pm_runtime_disable(mbox->dev->parent); +} + +/* Mailbox FIFO handle functions */ +static mbox_msg_t omap2_mbox_fifo_read(struct omap_mbox *mbox) +{ + struct omap_mbox2_fifo *fifo = + &((struct omap_mbox2_priv *)mbox->priv)->rx_fifo; + return (mbox_msg_t) mbox_read_reg(fifo->msg); +} + +static void omap2_mbox_fifo_write(struct omap_mbox *mbox, mbox_msg_t msg) +{ + struct omap_mbox2_fifo *fifo = + &((struct omap_mbox2_priv *)mbox->priv)->tx_fifo; + mbox_write_reg(msg, fifo->msg); +} + +static int omap2_mbox_fifo_empty(struct omap_mbox *mbox) +{ + struct omap_mbox2_fifo *fifo = + &((struct omap_mbox2_priv *)mbox->priv)->rx_fifo; + return (mbox_read_reg(fifo->msg_stat) == 0); +} + +static int omap2_mbox_fifo_full(struct omap_mbox *mbox) +{ + struct omap_mbox2_fifo *fifo = + &((struct omap_mbox2_priv *)mbox->priv)->tx_fifo; + return mbox_read_reg(fifo->fifo_stat); +} + +/* Mailbox IRQ handle functions */ +static void omap2_mbox_enable_irq(struct omap_mbox *mbox, omap_mbox_irq_t irq) +{ + struct omap_mbox2_priv *p = mbox->priv; + u32 l, bit = (irq == IRQ_TX) ? p->notfull_bit : p->newmsg_bit; + + l = mbox_read_reg(p->irqenable); + l |= bit; + mbox_write_reg(l, p->irqenable); +} + +static void omap2_mbox_disable_irq(struct omap_mbox *mbox, omap_mbox_irq_t irq) +{ + struct omap_mbox2_priv *p = mbox->priv; + u32 bit = (irq == IRQ_TX) ? p->notfull_bit : p->newmsg_bit; + + /* + * Read and update the interrupt configuration register for pre-OMAP4. + * OMAP4 and later SoCs have a dedicated interrupt disabling register. + */ + if (!p->intr_type) + bit = mbox_read_reg(p->irqdisable) & ~bit; + + mbox_write_reg(bit, p->irqdisable); +} + +static void omap2_mbox_ack_irq(struct omap_mbox *mbox, omap_mbox_irq_t irq) +{ + struct omap_mbox2_priv *p = mbox->priv; + u32 bit = (irq == IRQ_TX) ? p->notfull_bit : p->newmsg_bit; + + mbox_write_reg(bit, p->irqstatus); + + /* Flush posted write for irq status to avoid spurious interrupts */ + mbox_read_reg(p->irqstatus); +} + +static int omap2_mbox_is_irq(struct omap_mbox *mbox, omap_mbox_irq_t irq) +{ + struct omap_mbox2_priv *p = mbox->priv; + u32 bit = (irq == IRQ_TX) ? p->notfull_bit : p->newmsg_bit; + u32 enable = mbox_read_reg(p->irqenable); + u32 status = mbox_read_reg(p->irqstatus); + + return (int)(enable & status & bit); +} + +static void omap2_mbox_save_ctx(struct omap_mbox *mbox) +{ + int i; + struct omap_mbox2_priv *p = mbox->priv; + int nr_regs; + + if (p->intr_type) + nr_regs = OMAP4_MBOX_NR_REGS; + else + nr_regs = MBOX_NR_REGS; + for (i = 0; i < nr_regs; i++) { + p->ctx[i] = mbox_read_reg(i * sizeof(u32)); + + dev_dbg(mbox->dev, "%s: [%02x] %08x\n", __func__, + i, p->ctx[i]); + } +} + +static void omap2_mbox_restore_ctx(struct omap_mbox *mbox) +{ + int i; + struct omap_mbox2_priv *p = mbox->priv; + int nr_regs; + + if (p->intr_type) + nr_regs = OMAP4_MBOX_NR_REGS; + else + nr_regs = MBOX_NR_REGS; + for (i = 0; i < nr_regs; i++) { + mbox_write_reg(p->ctx[i], i * sizeof(u32)); + + dev_dbg(mbox->dev, "%s: [%02x] %08x\n", __func__, + i, p->ctx[i]); + } +} + +static struct omap_mbox_ops omap2_mbox_ops = { + .type = OMAP_MBOX_TYPE2, + .startup = omap2_mbox_startup, + .shutdown = omap2_mbox_shutdown, + .fifo_read = omap2_mbox_fifo_read, + .fifo_write = omap2_mbox_fifo_write, + .fifo_empty = omap2_mbox_fifo_empty, + .fifo_full = omap2_mbox_fifo_full, + .enable_irq = omap2_mbox_enable_irq, + .disable_irq = omap2_mbox_disable_irq, + .ack_irq = omap2_mbox_ack_irq, + .is_irq = omap2_mbox_is_irq, + .save_ctx = omap2_mbox_save_ctx, + .restore_ctx = omap2_mbox_restore_ctx, +}; + +static int omap2_mbox_probe(struct platform_device *pdev) +{ + struct resource *mem; + int ret; + struct omap_mbox **list, *mbox, *mboxblk; + struct omap_mbox2_priv *priv, *privblk; + struct omap_mbox_pdata *pdata = pdev->dev.platform_data; + struct omap_mbox_dev_info *info; + int i; + + if (!pdata || !pdata->info_cnt || !pdata->info) { + pr_err("%s: platform not supported\n", __func__); + return -ENODEV; + } + + /* allocate one extra for marking end of list */ + list = kzalloc((pdata->info_cnt + 1) * sizeof(*list), GFP_KERNEL); + if (!list) + return -ENOMEM; + + mboxblk = mbox = kzalloc(pdata->info_cnt * sizeof(*mbox), GFP_KERNEL); + if (!mboxblk) { + ret = -ENOMEM; + goto free_list; + } + + privblk = priv = kzalloc(pdata->info_cnt * sizeof(*priv), GFP_KERNEL); + if (!privblk) { + ret = -ENOMEM; + goto free_mboxblk; + } + + info = pdata->info; + for (i = 0; i < pdata->info_cnt; i++, info++, priv++) { + priv->tx_fifo.msg = MAILBOX_MESSAGE(info->tx_id); + priv->tx_fifo.fifo_stat = MAILBOX_FIFOSTATUS(info->tx_id); + priv->rx_fifo.msg = MAILBOX_MESSAGE(info->rx_id); + priv->rx_fifo.msg_stat = MAILBOX_MSGSTATUS(info->rx_id); + priv->notfull_bit = MAILBOX_IRQ_NOTFULL(info->tx_id); + priv->newmsg_bit = MAILBOX_IRQ_NEWMSG(info->rx_id); + if (pdata->intr_type) { + priv->irqenable = OMAP4_MAILBOX_IRQENABLE(info->usr_id); + priv->irqstatus = OMAP4_MAILBOX_IRQSTATUS(info->usr_id); + priv->irqdisable = + OMAP4_MAILBOX_IRQENABLE_CLR(info->usr_id); + } else { + priv->irqenable = MAILBOX_IRQENABLE(info->usr_id); + priv->irqstatus = MAILBOX_IRQSTATUS(info->usr_id); + priv->irqdisable = MAILBOX_IRQENABLE(info->usr_id); + } + priv->intr_type = pdata->intr_type; + + mbox->priv = priv; + mbox->name = info->name; + mbox->ops = &omap2_mbox_ops; + mbox->irq = platform_get_irq(pdev, info->irq_id); + if (mbox->irq < 0) { + ret = mbox->irq; + goto free_privblk; + } + list[i] = mbox++; + } + + mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!mem) { + ret = -ENOENT; + goto free_privblk; + } + + mbox_base = ioremap(mem->start, resource_size(mem)); + if (!mbox_base) { + ret = -ENOMEM; + goto free_privblk; + } + + ret = omap_mbox_register(&pdev->dev, list); + if (ret) + goto unmap_mbox; + platform_set_drvdata(pdev, list); + + return 0; + +unmap_mbox: + iounmap(mbox_base); +free_privblk: + kfree(privblk); +free_mboxblk: + kfree(mboxblk); +free_list: + kfree(list); + return ret; +} + +static int omap2_mbox_remove(struct platform_device *pdev) +{ + struct omap_mbox2_priv *privblk; + struct omap_mbox **list = platform_get_drvdata(pdev); + struct omap_mbox *mboxblk = list[0]; + + privblk = mboxblk->priv; + omap_mbox_unregister(); + iounmap(mbox_base); + kfree(privblk); + kfree(mboxblk); + kfree(list); + platform_set_drvdata(pdev, NULL); + + return 0; +} + +static struct platform_driver omap2_mbox_driver = { + .probe = omap2_mbox_probe, + .remove = omap2_mbox_remove, + .driver = { + .name = "omap-mailbox", + }, +}; + +static int __init omap2_mbox_init(void) +{ + return platform_driver_register(&omap2_mbox_driver); +} + +static void __exit omap2_mbox_exit(void) +{ + platform_driver_unregister(&omap2_mbox_driver); +} + +module_init(omap2_mbox_init); +module_exit(omap2_mbox_exit); + +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("omap mailbox: omap2/3/4 architecture specific functions"); +MODULE_AUTHOR("Hiroshi DOYU "); +MODULE_AUTHOR("Paul Mundt"); +MODULE_ALIAS("platform:omap2-mailbox"); diff --git a/drivers/mailbox/omap-mailbox.c b/drivers/mailbox/omap-mailbox.c new file mode 100644 index 000000000000..d79a646b9042 --- /dev/null +++ b/drivers/mailbox/omap-mailbox.c @@ -0,0 +1,469 @@ +/* + * OMAP mailbox driver + * + * Copyright (C) 2006-2009 Nokia Corporation. All rights reserved. + * + * Contact: Hiroshi DOYU + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "omap-mbox.h" + +static struct omap_mbox **mboxes; + +static int mbox_configured; +static DEFINE_MUTEX(mbox_configured_lock); + +static unsigned int mbox_kfifo_size = CONFIG_OMAP_MBOX_KFIFO_SIZE; +module_param(mbox_kfifo_size, uint, S_IRUGO); +MODULE_PARM_DESC(mbox_kfifo_size, "Size of omap's mailbox kfifo (bytes)"); + +/* Mailbox FIFO handle functions */ +static inline mbox_msg_t mbox_fifo_read(struct omap_mbox *mbox) +{ + return mbox->ops->fifo_read(mbox); +} +static inline void mbox_fifo_write(struct omap_mbox *mbox, mbox_msg_t msg) +{ + mbox->ops->fifo_write(mbox, msg); +} +static inline int mbox_fifo_empty(struct omap_mbox *mbox) +{ + return mbox->ops->fifo_empty(mbox); +} +static inline int mbox_fifo_full(struct omap_mbox *mbox) +{ + return mbox->ops->fifo_full(mbox); +} + +/* Mailbox IRQ handle functions */ +static inline void ack_mbox_irq(struct omap_mbox *mbox, omap_mbox_irq_t irq) +{ + if (mbox->ops->ack_irq) + mbox->ops->ack_irq(mbox, irq); +} +static inline int is_mbox_irq(struct omap_mbox *mbox, omap_mbox_irq_t irq) +{ + return mbox->ops->is_irq(mbox, irq); +} + +/* + * message sender + */ +static int __mbox_poll_for_space(struct omap_mbox *mbox) +{ + int ret = 0, i = 1000; + + while (mbox_fifo_full(mbox)) { + if (mbox->ops->type == OMAP_MBOX_TYPE2) + return -1; + if (--i == 0) + return -1; + udelay(1); + } + return ret; +} + +int omap_mbox_msg_send(struct omap_mbox *mbox, mbox_msg_t msg) +{ + struct omap_mbox_queue *mq = mbox->txq; + int ret = 0, len; + + spin_lock_bh(&mq->lock); + + if (kfifo_avail(&mq->fifo) < sizeof(msg)) { + ret = -ENOMEM; + goto out; + } + + if (kfifo_is_empty(&mq->fifo) && !__mbox_poll_for_space(mbox)) { + mbox_fifo_write(mbox, msg); + goto out; + } + + len = kfifo_in(&mq->fifo, (unsigned char *)&msg, sizeof(msg)); + WARN_ON(len != sizeof(msg)); + + tasklet_schedule(&mbox->txq->tasklet); + +out: + spin_unlock_bh(&mq->lock); + return ret; +} +EXPORT_SYMBOL(omap_mbox_msg_send); + +void omap_mbox_save_ctx(struct omap_mbox *mbox) +{ + if (!mbox->ops->save_ctx) { + dev_err(mbox->dev, "%s:\tno save\n", __func__); + return; + } + + mbox->ops->save_ctx(mbox); +} +EXPORT_SYMBOL(omap_mbox_save_ctx); + +void omap_mbox_restore_ctx(struct omap_mbox *mbox) +{ + if (!mbox->ops->restore_ctx) { + dev_err(mbox->dev, "%s:\tno restore\n", __func__); + return; + } + + mbox->ops->restore_ctx(mbox); +} +EXPORT_SYMBOL(omap_mbox_restore_ctx); + +void omap_mbox_enable_irq(struct omap_mbox *mbox, omap_mbox_irq_t irq) +{ + mbox->ops->enable_irq(mbox, irq); +} +EXPORT_SYMBOL(omap_mbox_enable_irq); + +void omap_mbox_disable_irq(struct omap_mbox *mbox, omap_mbox_irq_t irq) +{ + mbox->ops->disable_irq(mbox, irq); +} +EXPORT_SYMBOL(omap_mbox_disable_irq); + +static void mbox_tx_tasklet(unsigned long tx_data) +{ + struct omap_mbox *mbox = (struct omap_mbox *)tx_data; + struct omap_mbox_queue *mq = mbox->txq; + mbox_msg_t msg; + int ret; + + while (kfifo_len(&mq->fifo)) { + if (__mbox_poll_for_space(mbox)) { + omap_mbox_enable_irq(mbox, IRQ_TX); + break; + } + + ret = kfifo_out(&mq->fifo, (unsigned char *)&msg, + sizeof(msg)); + WARN_ON(ret != sizeof(msg)); + + mbox_fifo_write(mbox, msg); + } +} + +/* + * Message receiver(workqueue) + */ +static void mbox_rx_work(struct work_struct *work) +{ + struct omap_mbox_queue *mq = + container_of(work, struct omap_mbox_queue, work); + mbox_msg_t msg; + int len; + + while (kfifo_len(&mq->fifo) >= sizeof(msg)) { + len = kfifo_out(&mq->fifo, (unsigned char *)&msg, sizeof(msg)); + WARN_ON(len != sizeof(msg)); + + blocking_notifier_call_chain(&mq->mbox->notifier, len, + (void *)msg); + spin_lock_irq(&mq->lock); + if (mq->full) { + mq->full = false; + omap_mbox_enable_irq(mq->mbox, IRQ_RX); + } + spin_unlock_irq(&mq->lock); + } +} + +/* + * Mailbox interrupt handler + */ +static void __mbox_tx_interrupt(struct omap_mbox *mbox) +{ + omap_mbox_disable_irq(mbox, IRQ_TX); + ack_mbox_irq(mbox, IRQ_TX); + tasklet_schedule(&mbox->txq->tasklet); +} + +static void __mbox_rx_interrupt(struct omap_mbox *mbox) +{ + struct omap_mbox_queue *mq = mbox->rxq; + mbox_msg_t msg; + int len; + + while (!mbox_fifo_empty(mbox)) { + if (unlikely(kfifo_avail(&mq->fifo) < sizeof(msg))) { + omap_mbox_disable_irq(mbox, IRQ_RX); + mq->full = true; + goto nomem; + } + + msg = mbox_fifo_read(mbox); + + len = kfifo_in(&mq->fifo, (unsigned char *)&msg, sizeof(msg)); + WARN_ON(len != sizeof(msg)); + + if (mbox->ops->type == OMAP_MBOX_TYPE1) + break; + } + + /* no more messages in the fifo. clear IRQ source. */ + ack_mbox_irq(mbox, IRQ_RX); +nomem: + schedule_work(&mbox->rxq->work); +} + +static irqreturn_t mbox_interrupt(int irq, void *p) +{ + struct omap_mbox *mbox = p; + + if (is_mbox_irq(mbox, IRQ_TX)) + __mbox_tx_interrupt(mbox); + + if (is_mbox_irq(mbox, IRQ_RX)) + __mbox_rx_interrupt(mbox); + + return IRQ_HANDLED; +} + +static struct omap_mbox_queue *mbox_queue_alloc(struct omap_mbox *mbox, + void (*work) (struct work_struct *), + void (*tasklet)(unsigned long)) +{ + struct omap_mbox_queue *mq; + + mq = kzalloc(sizeof(struct omap_mbox_queue), GFP_KERNEL); + if (!mq) + return NULL; + + spin_lock_init(&mq->lock); + + if (kfifo_alloc(&mq->fifo, mbox_kfifo_size, GFP_KERNEL)) + goto error; + + if (work) + INIT_WORK(&mq->work, work); + + if (tasklet) + tasklet_init(&mq->tasklet, tasklet, (unsigned long)mbox); + return mq; +error: + kfree(mq); + return NULL; +} + +static void mbox_queue_free(struct omap_mbox_queue *q) +{ + kfifo_free(&q->fifo); + kfree(q); +} + +static int omap_mbox_startup(struct omap_mbox *mbox) +{ + int ret = 0; + struct omap_mbox_queue *mq; + + mutex_lock(&mbox_configured_lock); + if (!mbox_configured++) { + if (likely(mbox->ops->startup)) { + ret = mbox->ops->startup(mbox); + if (unlikely(ret)) + goto fail_startup; + } else + goto fail_startup; + } + + if (!mbox->use_count++) { + mq = mbox_queue_alloc(mbox, NULL, mbox_tx_tasklet); + if (!mq) { + ret = -ENOMEM; + goto fail_alloc_txq; + } + mbox->txq = mq; + + mq = mbox_queue_alloc(mbox, mbox_rx_work, NULL); + if (!mq) { + ret = -ENOMEM; + goto fail_alloc_rxq; + } + mbox->rxq = mq; + mq->mbox = mbox; + ret = request_irq(mbox->irq, mbox_interrupt, IRQF_SHARED, + mbox->name, mbox); + if (unlikely(ret)) { + pr_err("failed to register mailbox interrupt:%d\n", + ret); + goto fail_request_irq; + } + + omap_mbox_enable_irq(mbox, IRQ_RX); + } + mutex_unlock(&mbox_configured_lock); + return 0; + +fail_request_irq: + mbox_queue_free(mbox->rxq); +fail_alloc_rxq: + mbox_queue_free(mbox->txq); +fail_alloc_txq: + if (mbox->ops->shutdown) + mbox->ops->shutdown(mbox); + mbox->use_count--; +fail_startup: + mbox_configured--; + mutex_unlock(&mbox_configured_lock); + return ret; +} + +static void omap_mbox_fini(struct omap_mbox *mbox) +{ + mutex_lock(&mbox_configured_lock); + + if (!--mbox->use_count) { + omap_mbox_disable_irq(mbox, IRQ_RX); + free_irq(mbox->irq, mbox); + tasklet_kill(&mbox->txq->tasklet); + flush_work(&mbox->rxq->work); + mbox_queue_free(mbox->txq); + mbox_queue_free(mbox->rxq); + } + + if (likely(mbox->ops->shutdown)) { + if (!--mbox_configured) + mbox->ops->shutdown(mbox); + } + + mutex_unlock(&mbox_configured_lock); +} + +struct omap_mbox *omap_mbox_get(const char *name, struct notifier_block *nb) +{ + struct omap_mbox *_mbox, *mbox = NULL; + int i, ret; + + if (!mboxes) + return ERR_PTR(-EINVAL); + + for (i = 0; (_mbox = mboxes[i]); i++) { + if (!strcmp(_mbox->name, name)) { + mbox = _mbox; + break; + } + } + + if (!mbox) + return ERR_PTR(-ENOENT); + + if (nb) + blocking_notifier_chain_register(&mbox->notifier, nb); + + ret = omap_mbox_startup(mbox); + if (ret) { + blocking_notifier_chain_unregister(&mbox->notifier, nb); + return ERR_PTR(-ENODEV); + } + + return mbox; +} +EXPORT_SYMBOL(omap_mbox_get); + +void omap_mbox_put(struct omap_mbox *mbox, struct notifier_block *nb) +{ + blocking_notifier_chain_unregister(&mbox->notifier, nb); + omap_mbox_fini(mbox); +} +EXPORT_SYMBOL(omap_mbox_put); + +static struct class omap_mbox_class = { .name = "mbox", }; + +int omap_mbox_register(struct device *parent, struct omap_mbox **list) +{ + int ret; + int i; + + mboxes = list; + if (!mboxes) + return -EINVAL; + + for (i = 0; mboxes[i]; i++) { + struct omap_mbox *mbox = mboxes[i]; + mbox->dev = device_create(&omap_mbox_class, + parent, 0, mbox, "%s", mbox->name); + if (IS_ERR(mbox->dev)) { + ret = PTR_ERR(mbox->dev); + goto err_out; + } + + BLOCKING_INIT_NOTIFIER_HEAD(&mbox->notifier); + } + return 0; + +err_out: + while (i--) + device_unregister(mboxes[i]->dev); + return ret; +} +EXPORT_SYMBOL(omap_mbox_register); + +int omap_mbox_unregister(void) +{ + int i; + + if (!mboxes) + return -EINVAL; + + for (i = 0; mboxes[i]; i++) + device_unregister(mboxes[i]->dev); + mboxes = NULL; + return 0; +} +EXPORT_SYMBOL(omap_mbox_unregister); + +static int __init omap_mbox_init(void) +{ + int err; + + err = class_register(&omap_mbox_class); + if (err) + return err; + + /* kfifo size sanity check: alignment and minimal size */ + mbox_kfifo_size = ALIGN(mbox_kfifo_size, sizeof(mbox_msg_t)); + mbox_kfifo_size = max_t(unsigned int, mbox_kfifo_size, + sizeof(mbox_msg_t)); + + return 0; +} +subsys_initcall(omap_mbox_init); + +static void __exit omap_mbox_exit(void) +{ + class_unregister(&omap_mbox_class); +} +module_exit(omap_mbox_exit); + +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("omap mailbox: interrupt driven messaging"); +MODULE_AUTHOR("Toshihiro Kobayashi"); +MODULE_AUTHOR("Hiroshi DOYU"); diff --git a/drivers/mailbox/omap-mbox.h b/drivers/mailbox/omap-mbox.h new file mode 100644 index 000000000000..6cd38fc68599 --- /dev/null +++ b/drivers/mailbox/omap-mbox.h @@ -0,0 +1,67 @@ +/* + * omap-mbox.h: OMAP mailbox internal definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef OMAP_MBOX_H +#define OMAP_MBOX_H + +#include +#include +#include +#include +#include +#include + +typedef int __bitwise omap_mbox_type_t; +#define OMAP_MBOX_TYPE1 ((__force omap_mbox_type_t) 1) +#define OMAP_MBOX_TYPE2 ((__force omap_mbox_type_t) 2) + +struct omap_mbox_ops { + omap_mbox_type_t type; + int (*startup)(struct omap_mbox *mbox); + void (*shutdown)(struct omap_mbox *mbox); + /* fifo */ + mbox_msg_t (*fifo_read)(struct omap_mbox *mbox); + void (*fifo_write)(struct omap_mbox *mbox, mbox_msg_t msg); + int (*fifo_empty)(struct omap_mbox *mbox); + int (*fifo_full)(struct omap_mbox *mbox); + /* irq */ + void (*enable_irq)(struct omap_mbox *mbox, + omap_mbox_irq_t irq); + void (*disable_irq)(struct omap_mbox *mbox, + omap_mbox_irq_t irq); + void (*ack_irq)(struct omap_mbox *mbox, omap_mbox_irq_t irq); + int (*is_irq)(struct omap_mbox *mbox, omap_mbox_irq_t irq); + /* ctx */ + void (*save_ctx)(struct omap_mbox *mbox); + void (*restore_ctx)(struct omap_mbox *mbox); +}; + +struct omap_mbox_queue { + spinlock_t lock; + struct kfifo fifo; + struct work_struct work; + struct tasklet_struct tasklet; + struct omap_mbox *mbox; + bool full; +}; + +struct omap_mbox { + const char *name; + unsigned int irq; + struct omap_mbox_queue *txq, *rxq; + struct omap_mbox_ops *ops; + struct device *dev; + void *priv; + int use_count; + struct blocking_notifier_head notifier; +}; + +int omap_mbox_register(struct device *parent, struct omap_mbox **); +int omap_mbox_unregister(void); + +#endif /* OMAP_MBOX_H */ diff --git a/drivers/remoteproc/Kconfig b/drivers/remoteproc/Kconfig index d4d377c40ec9..ce1743d0b679 100644 --- a/drivers/remoteproc/Kconfig +++ b/drivers/remoteproc/Kconfig @@ -14,8 +14,9 @@ config OMAP_REMOTEPROC depends on HAS_DMA depends on ARCH_OMAP4 || SOC_OMAP5 depends on OMAP_IOMMU - depends on OMAP_MBOX_FWK select REMOTEPROC + select MAILBOX + select OMAP2PLUS_MBOX select RPMSG help Say y here to support OMAP's remote processors (dual M3 diff --git a/drivers/remoteproc/omap_remoteproc.c b/drivers/remoteproc/omap_remoteproc.c index 0e396c155b3b..51689721ea7a 100644 --- a/drivers/remoteproc/omap_remoteproc.c +++ b/drivers/remoteproc/omap_remoteproc.c @@ -27,8 +27,8 @@ #include #include #include +#include -#include #include #include "omap_remoteproc.h" diff --git a/drivers/staging/tidspbridge/Kconfig b/drivers/staging/tidspbridge/Kconfig index 60848f198b48..165b918b8171 100644 --- a/drivers/staging/tidspbridge/Kconfig +++ b/drivers/staging/tidspbridge/Kconfig @@ -5,7 +5,8 @@ menuconfig TIDSPBRIDGE tristate "DSP Bridge driver" depends on ARCH_OMAP3 && !ARCH_MULTIPLATFORM - select OMAP_MBOX_FWK + select MAILBOX + select OMAP2PLUS_MBOX help DSP/BIOS Bridge is designed for platforms that contain a GPP and one or more attached DSPs. The GPP is considered the master or diff --git a/drivers/staging/tidspbridge/include/dspbridge/host_os.h b/drivers/staging/tidspbridge/include/dspbridge/host_os.h index 7f3a1db31619..d1441db469fc 100644 --- a/drivers/staging/tidspbridge/include/dspbridge/host_os.h +++ b/drivers/staging/tidspbridge/include/dspbridge/host_os.h @@ -41,7 +41,7 @@ #include #include #include -#include +#include #include #include #include diff --git a/include/linux/omap-mailbox.h b/include/linux/omap-mailbox.h new file mode 100644 index 000000000000..f8322d9cd235 --- /dev/null +++ b/include/linux/omap-mailbox.h @@ -0,0 +1,29 @@ +/* + * omap-mailbox: interprocessor communication module for OMAP + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef OMAP_MAILBOX_H +#define OMAP_MAILBOX_H + +typedef u32 mbox_msg_t; +struct omap_mbox; + +typedef int __bitwise omap_mbox_irq_t; +#define IRQ_TX ((__force omap_mbox_irq_t) 1) +#define IRQ_RX ((__force omap_mbox_irq_t) 2) + +int omap_mbox_msg_send(struct omap_mbox *, mbox_msg_t msg); + +struct omap_mbox *omap_mbox_get(const char *, struct notifier_block *nb); +void omap_mbox_put(struct omap_mbox *mbox, struct notifier_block *nb); + +void omap_mbox_save_ctx(struct omap_mbox *mbox); +void omap_mbox_restore_ctx(struct omap_mbox *mbox); +void omap_mbox_enable_irq(struct omap_mbox *mbox, omap_mbox_irq_t irq); +void omap_mbox_disable_irq(struct omap_mbox *mbox, omap_mbox_irq_t irq); + +#endif /* OMAP_MAILBOX_H */ -- cgit v1.2.3 From 9fdb27d48a3a1abae4c3554b82dce9f0aafc377a Mon Sep 17 00:00:00 2001 From: Sylwester Nawrocki Date: Mon, 10 Jun 2013 18:22:19 +0900 Subject: gpio: samsung: Remove OF support for s3c24xx There is no users of this code and there is already a pinctrl driver written for s3c24xx which is going to be used on any s3c24xx DT platforms. Hence this has been effectively a dead code in mainline. This reverts commit 172c6a13653ac8cd6a231293b87c93821e90c1d6 gpio: samsung: add devicetree init for s3c24xx arches Signed-off-by: Sylwester Nawrocki Signed-off-by: Kyungmin Park Acked-by: Heiko Stuebner Acked-by: Linus Walleij Signed-off-by: Kukjin Kim --- .../devicetree/bindings/gpio/gpio-samsung.txt | 43 --------------- drivers/gpio/gpio-samsung.c | 63 ---------------------- 2 files changed, 106 deletions(-) diff --git a/Documentation/devicetree/bindings/gpio/gpio-samsung.txt b/Documentation/devicetree/bindings/gpio/gpio-samsung.txt index f1e5dfecf55d..5375625e8cd2 100644 --- a/Documentation/devicetree/bindings/gpio/gpio-samsung.txt +++ b/Documentation/devicetree/bindings/gpio/gpio-samsung.txt @@ -39,46 +39,3 @@ Example: #gpio-cells = <4>; gpio-controller; }; - - -Samsung S3C24XX GPIO Controller - -Required properties: -- compatible: Compatible property value should be "samsung,s3c24xx-gpio". - -- reg: Physical base address of the controller and length of memory mapped - region. - -- #gpio-cells: Should be 3. The syntax of the gpio specifier used by client nodes - should be the following with values derived from the SoC user manual. - <[phandle of the gpio controller node] - [pin number within the gpio controller] - [mux function] - [flags and pull up/down] - - Values for gpio specifier: - - Pin number: depending on the controller a number from 0 up to 15. - - Mux function: Depending on the SoC and the gpio bank the gpio can be set - as input, output or a special function - - Flags and Pull Up/Down: the values to use differ for the individual SoCs - example S3C2416/S3C2450: - 0 - Pull Up/Down Disabled. - 1 - Pull Down Enabled. - 2 - Pull Up Enabled. - Bit 16 (0x00010000) - Input is active low. - Consult the user manual for the correct values of Mux and Pull Up/Down. - -- gpio-controller: Specifies that the node is a gpio controller. -- #address-cells: should be 1. -- #size-cells: should be 1. - -Example: - - gpa: gpio-controller@56000000 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "samsung,s3c24xx-gpio"; - reg = <0x56000000 0x10>; - #gpio-cells = <3>; - gpio-controller; - }; diff --git a/drivers/gpio/gpio-samsung.c b/drivers/gpio/gpio-samsung.c index b22ca7933745..96f6a7c7a326 100644 --- a/drivers/gpio/gpio-samsung.c +++ b/drivers/gpio/gpio-samsung.c @@ -933,67 +933,6 @@ static void __init samsung_gpiolib_add(struct samsung_gpio_chip *chip) s3c_gpiolib_track(chip); } -#if defined(CONFIG_PLAT_S3C24XX) && defined(CONFIG_OF) -static int s3c24xx_gpio_xlate(struct gpio_chip *gc, - const struct of_phandle_args *gpiospec, u32 *flags) -{ - unsigned int pin; - - if (WARN_ON(gc->of_gpio_n_cells < 3)) - return -EINVAL; - - if (WARN_ON(gpiospec->args_count < gc->of_gpio_n_cells)) - return -EINVAL; - - if (gpiospec->args[0] > gc->ngpio) - return -EINVAL; - - pin = gc->base + gpiospec->args[0]; - - if (s3c_gpio_cfgpin(pin, S3C_GPIO_SFN(gpiospec->args[1]))) - pr_warn("gpio_xlate: failed to set pin function\n"); - if (s3c_gpio_setpull(pin, gpiospec->args[2] & 0xffff)) - pr_warn("gpio_xlate: failed to set pin pull up/down\n"); - - if (flags) - *flags = gpiospec->args[2] >> 16; - - return gpiospec->args[0]; -} - -static const struct of_device_id s3c24xx_gpio_dt_match[] __initdata = { - { .compatible = "samsung,s3c24xx-gpio", }, - {} -}; - -static __init void s3c24xx_gpiolib_attach_ofnode(struct samsung_gpio_chip *chip, - u64 base, u64 offset) -{ - struct gpio_chip *gc = &chip->chip; - u64 address; - - if (!of_have_populated_dt()) - return; - - address = chip->base ? base + ((u32)chip->base & 0xfff) : base + offset; - gc->of_node = of_find_matching_node_by_address(NULL, - s3c24xx_gpio_dt_match, address); - if (!gc->of_node) { - pr_info("gpio: device tree node not found for gpio controller" - " with base address %08llx\n", address); - return; - } - gc->of_gpio_n_cells = 3; - gc->of_xlate = s3c24xx_gpio_xlate; -} -#else -static __init void s3c24xx_gpiolib_attach_ofnode(struct samsung_gpio_chip *chip, - u64 base, u64 offset) -{ - return; -} -#endif /* defined(CONFIG_PLAT_S3C24XX) && defined(CONFIG_OF) */ - static void __init s3c24xx_gpiolib_add_chips(struct samsung_gpio_chip *chip, int nr_chips, void __iomem *base) { @@ -1018,8 +957,6 @@ static void __init s3c24xx_gpiolib_add_chips(struct samsung_gpio_chip *chip, gc->direction_output = samsung_gpiolib_2bit_output; samsung_gpiolib_add(chip); - - s3c24xx_gpiolib_attach_ofnode(chip, S3C24XX_PA_GPIO, i * 0x10); } } -- cgit v1.2.3 From 6e8d1d41bba39e051c9c860efbd83078a94f59a3 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Tue, 11 Jun 2013 13:37:48 +0200 Subject: pinctrl: r8a73a4: add pinmux data for MMCIF and SDHI interfaces This patch adds pinmux groups and functions for the two MMCIF and three SDHI interfaces on r8a73a4 (APE6). Signed-off-by: Guennadi Liakhovetski Acked-by: Laurent Pinchart Signed-off-by: Simon Horman --- drivers/pinctrl/sh-pfc/pfc-r8a73a4.c | 198 +++++++++++++++++++++++++++++++++++ 1 file changed, 198 insertions(+) diff --git a/drivers/pinctrl/sh-pfc/pfc-r8a73a4.c b/drivers/pinctrl/sh-pfc/pfc-r8a73a4.c index bbff5596e922..82bf6aba0074 100644 --- a/drivers/pinctrl/sh-pfc/pfc-r8a73a4.c +++ b/drivers/pinctrl/sh-pfc/pfc-r8a73a4.c @@ -1488,6 +1488,66 @@ IRQC_PINS_MUX(326, 54); IRQC_PINS_MUX(327, 55); IRQC_PINS_MUX(328, 56); IRQC_PINS_MUX(329, 57); +/* - MMCIF0 ----------------------------------------------------------------- */ +static const unsigned int mmc0_data1_pins[] = { + /* D[0] */ + 164, +}; +static const unsigned int mmc0_data1_mux[] = { + MMCD0_0_MARK, +}; +static const unsigned int mmc0_data4_pins[] = { + /* D[0:3] */ + 164, 165, 166, 167, +}; +static const unsigned int mmc0_data4_mux[] = { + MMCD0_0_MARK, MMCD0_1_MARK, MMCD0_2_MARK, MMCD0_3_MARK, +}; +static const unsigned int mmc0_data8_pins[] = { + /* D[0:7] */ + 164, 165, 166, 167, 168, 169, 170, 171, +}; +static const unsigned int mmc0_data8_mux[] = { + MMCD0_0_MARK, MMCD0_1_MARK, MMCD0_2_MARK, MMCD0_3_MARK, + MMCD0_4_MARK, MMCD0_5_MARK, MMCD0_6_MARK, MMCD0_7_MARK, +}; +static const unsigned int mmc0_ctrl_pins[] = { + /* CMD, CLK */ + 172, 173, +}; +static const unsigned int mmc0_ctrl_mux[] = { + MMCCMD0_MARK, MMCCLK0_MARK, +}; +/* - MMCIF1 ----------------------------------------------------------------- */ +static const unsigned int mmc1_data1_pins[] = { + /* D[0] */ + 199, +}; +static const unsigned int mmc1_data1_mux[] = { + MMCD1_0_MARK, +}; +static const unsigned int mmc1_data4_pins[] = { + /* D[0:3] */ + 199, 198, 197, 196, +}; +static const unsigned int mmc1_data4_mux[] = { + MMCD1_0_MARK, MMCD1_1_MARK, MMCD1_2_MARK, MMCD1_3_MARK, +}; +static const unsigned int mmc1_data8_pins[] = { + /* D[0:7] */ + 199, 198, 197, 196, 195, 194, 193, 192, +}; +static const unsigned int mmc1_data8_mux[] = { + MMCD1_0_MARK, MMCD1_1_MARK, MMCD1_2_MARK, MMCD1_3_MARK, + MMCD1_4_MARK, MMCD1_5_MARK, MMCD1_6_MARK, MMCD1_7_MARK, +}; +static const unsigned int mmc1_ctrl_pins[] = { + /* CMD, CLK */ + 200, 203, +}; +static const unsigned int mmc1_ctrl_mux[] = { + MMCCMD1_MARK, MMCCLK1_MARK, +}; /* - SCIFA0 ----------------------------------------------------------------- */ static const unsigned int scifa0_data_pins[] = { /* SCIFA0_RXD, SCIFA0_TXD */ @@ -1683,6 +1743,86 @@ static const unsigned int scifb3_ctrl_b_pins[] = { static const unsigned int scifb3_ctrl_b_mux[] = { SCIFB3_RTS_38_MARK, SCIFB3_CTS_39_MARK, }; +/* - SDHI0 ------------------------------------------------------------------ */ +static const unsigned int sdhi0_data1_pins[] = { + /* D0 */ + 302, +}; +static const unsigned int sdhi0_data1_mux[] = { + SDHID0_0_MARK, +}; +static const unsigned int sdhi0_data4_pins[] = { + /* D[0:3] */ + 302, 303, 304, 305, +}; +static const unsigned int sdhi0_data4_mux[] = { + SDHID0_0_MARK, SDHID0_1_MARK, SDHID0_2_MARK, SDHID0_3_MARK, +}; +static const unsigned int sdhi0_ctrl_pins[] = { + /* CLK, CMD */ + 308, 306, +}; +static const unsigned int sdhi0_ctrl_mux[] = { + SDHICLK0_MARK, SDHICMD0_MARK, +}; +static const unsigned int sdhi0_cd_pins[] = { + /* CD */ + 301, +}; +static const unsigned int sdhi0_cd_mux[] = { + SDHICD0_MARK, +}; +static const unsigned int sdhi0_wp_pins[] = { + /* WP */ + 307, +}; +static const unsigned int sdhi0_wp_mux[] = { + SDHIWP0_MARK, +}; +/* - SDHI1 ------------------------------------------------------------------ */ +static const unsigned int sdhi1_data1_pins[] = { + /* D0 */ + 289, +}; +static const unsigned int sdhi1_data1_mux[] = { + SDHID1_0_MARK, +}; +static const unsigned int sdhi1_data4_pins[] = { + /* D[0:3] */ + 289, 290, 291, 292, +}; +static const unsigned int sdhi1_data4_mux[] = { + SDHID1_0_MARK, SDHID1_1_MARK, SDHID1_2_MARK, SDHID1_3_MARK, +}; +static const unsigned int sdhi1_ctrl_pins[] = { + /* CLK, CMD */ + 293, 294, +}; +static const unsigned int sdhi1_ctrl_mux[] = { + SDHICLK1_MARK, SDHICMD1_MARK, +}; +/* - SDHI2 ------------------------------------------------------------------ */ +static const unsigned int sdhi2_data1_pins[] = { + /* D0 */ + 295, +}; +static const unsigned int sdhi2_data1_mux[] = { + SDHID2_0_MARK, +}; +static const unsigned int sdhi2_data4_pins[] = { + /* D[0:3] */ + 295, 296, 297, 298, +}; +static const unsigned int sdhi2_data4_mux[] = { + SDHID2_0_MARK, SDHID2_1_MARK, SDHID2_2_MARK, SDHID2_3_MARK, +}; +static const unsigned int sdhi2_ctrl_pins[] = { + /* CLK, CMD */ + 299, 300, +}; +static const unsigned int sdhi2_ctrl_mux[] = { + SDHICLK2_MARK, SDHICMD2_MARK, +}; static const struct sh_pfc_pin_group pinmux_groups[] = { SH_PFC_PIN_GROUP(irqc_irq0), @@ -1743,6 +1883,14 @@ static const struct sh_pfc_pin_group pinmux_groups[] = { SH_PFC_PIN_GROUP(irqc_irq55), SH_PFC_PIN_GROUP(irqc_irq56), SH_PFC_PIN_GROUP(irqc_irq57), + SH_PFC_PIN_GROUP(mmc0_data1), + SH_PFC_PIN_GROUP(mmc0_data4), + SH_PFC_PIN_GROUP(mmc0_data8), + SH_PFC_PIN_GROUP(mmc0_ctrl), + SH_PFC_PIN_GROUP(mmc1_data1), + SH_PFC_PIN_GROUP(mmc1_data4), + SH_PFC_PIN_GROUP(mmc1_data8), + SH_PFC_PIN_GROUP(mmc1_ctrl), SH_PFC_PIN_GROUP(scifa0_data), SH_PFC_PIN_GROUP(scifa0_clk), SH_PFC_PIN_GROUP(scifa0_ctrl), @@ -1770,6 +1918,17 @@ static const struct sh_pfc_pin_group pinmux_groups[] = { SH_PFC_PIN_GROUP(scifb3_data_b), SH_PFC_PIN_GROUP(scifb3_clk_b), SH_PFC_PIN_GROUP(scifb3_ctrl_b), + SH_PFC_PIN_GROUP(sdhi0_data1), + SH_PFC_PIN_GROUP(sdhi0_data4), + SH_PFC_PIN_GROUP(sdhi0_ctrl), + SH_PFC_PIN_GROUP(sdhi0_cd), + SH_PFC_PIN_GROUP(sdhi0_wp), + SH_PFC_PIN_GROUP(sdhi1_data1), + SH_PFC_PIN_GROUP(sdhi1_data4), + SH_PFC_PIN_GROUP(sdhi1_ctrl), + SH_PFC_PIN_GROUP(sdhi2_data1), + SH_PFC_PIN_GROUP(sdhi2_data4), + SH_PFC_PIN_GROUP(sdhi2_ctrl), }; static const char * const irqc_groups[] = { @@ -1833,6 +1992,20 @@ static const char * const irqc_groups[] = { "irqc_irq57", }; +static const char * const mmc0_groups[] = { + "mmc0_data1", + "mmc0_data4", + "mmc0_data8", + "mmc0_ctrl", +}; + +static const char * const mmc1_groups[] = { + "mmc1_data1", + "mmc1_data4", + "mmc1_data8", + "mmc1_ctrl", +}; + static const char * const scifa0_groups[] = { "scifa0_data", "scifa0_clk", @@ -1878,14 +2051,39 @@ static const char * const scifb3_groups[] = { "scifb3_ctrl_b", }; +static const char * const sdhi0_groups[] = { + "sdhi0_data1", + "sdhi0_data4", + "sdhi0_ctrl", + "sdhi0_cd", + "sdhi0_wp", +}; + +static const char * const sdhi1_groups[] = { + "sdhi1_data1", + "sdhi1_data4", + "sdhi1_ctrl", +}; + +static const char * const sdhi2_groups[] = { + "sdhi2_data1", + "sdhi2_data4", + "sdhi2_ctrl", +}; + static const struct sh_pfc_function pinmux_functions[] = { SH_PFC_FUNCTION(irqc), + SH_PFC_FUNCTION(mmc0), + SH_PFC_FUNCTION(mmc1), SH_PFC_FUNCTION(scifa0), SH_PFC_FUNCTION(scifa1), SH_PFC_FUNCTION(scifb0), SH_PFC_FUNCTION(scifb1), SH_PFC_FUNCTION(scifb2), SH_PFC_FUNCTION(scifb3), + SH_PFC_FUNCTION(sdhi0), + SH_PFC_FUNCTION(sdhi1), + SH_PFC_FUNCTION(sdhi2), }; #undef PORTCR -- cgit v1.2.3 From fbd0ca3de1380cf1881e5e92fb8a97ad24171b4c Mon Sep 17 00:00:00 2001 From: Ulrich Hecht Date: Fri, 31 May 2013 15:57:03 +0000 Subject: sh-pfc: r8a7790: add HSCIF pin groups Adds HSCIF data/clk/ctrl groups to R8A7790 PFC driver. Signed-off-by: Ulrich Hecht Reviewed-by: Laurent Pinchart Signed-off-by: Simon Horman --- drivers/pinctrl/sh-pfc/pfc-r8a7790.c | 211 ++++++++++++++++++++++++++++++++--- 1 file changed, 196 insertions(+), 15 deletions(-) diff --git a/drivers/pinctrl/sh-pfc/pfc-r8a7790.c b/drivers/pinctrl/sh-pfc/pfc-r8a7790.c index 85d77a417c0e..1e7a5eb70a00 100644 --- a/drivers/pinctrl/sh-pfc/pfc-r8a7790.c +++ b/drivers/pinctrl/sh-pfc/pfc-r8a7790.c @@ -1979,6 +1979,141 @@ static const unsigned int scif1_clk_e_pins[] = { static const unsigned int scif1_clk_e_mux[] = { SCK1_E_MARK, }; +/* - HSCIF0 ----------------------------------------------------------------- */ +static const unsigned int hscif0_data_pins[] = { + /* RX, TX */ + RCAR_GP_PIN(5, 8), RCAR_GP_PIN(5, 9), +}; +static const unsigned int hscif0_data_mux[] = { + HRX0_MARK, HTX0_MARK, +}; +static const unsigned int hscif0_clk_pins[] = { + /* SCK */ + RCAR_GP_PIN(5, 7), +}; +static const unsigned int hscif0_clk_mux[] = { + HSCK0_MARK, +}; +static const unsigned int hscif0_ctrl_pins[] = { + /* RTS, CTS */ + RCAR_GP_PIN(5, 11), RCAR_GP_PIN(5, 10), +}; +static const unsigned int hscif0_ctrl_mux[] = { + HRTS0_N_MARK, HCTS0_N_MARK, +}; +static const unsigned int hscif0_data_b_pins[] = { + /* RX, TX */ + RCAR_GP_PIN(1, 23), RCAR_GP_PIN(1, 12), +}; +static const unsigned int hscif0_data_b_mux[] = { + HRX0_B_MARK, HTX0_B_MARK, +}; +static const unsigned int hscif0_ctrl_b_pins[] = { + /* RTS, CTS */ + RCAR_GP_PIN(1, 29), RCAR_GP_PIN(1, 28), +}; +static const unsigned int hscif0_ctrl_b_mux[] = { + HRTS0_N_B_MARK, HCTS0_N_B_MARK, +}; +static const unsigned int hscif0_data_c_pins[] = { + /* RX, TX */ + RCAR_GP_PIN(5, 13), RCAR_GP_PIN(5, 16), +}; +static const unsigned int hscif0_data_c_mux[] = { + HRX0_C_MARK, HTX0_C_MARK, +}; +static const unsigned int hscif0_ctrl_c_pins[] = { + /* RTS, CTS */ + RCAR_GP_PIN(5, 3), RCAR_GP_PIN(5, 7), +}; +static const unsigned int hscif0_ctrl_c_mux[] = { + HRTS0_N_C_MARK, HCTS0_N_C_MARK, +}; +static const unsigned int hscif0_data_d_pins[] = { + /* RX, TX */ + RCAR_GP_PIN(3, 20), RCAR_GP_PIN(3, 21), +}; +static const unsigned int hscif0_data_d_mux[] = { + HRX0_D_MARK, HTX0_D_MARK, +}; +static const unsigned int hscif0_ctrl_d_pins[] = { + /* RTS, CTS */ + RCAR_GP_PIN(3, 23), RCAR_GP_PIN(3, 22), +}; +static const unsigned int hscif0_ctrl_d_mux[] = { + HRTS0_N_D_MARK, HCTS0_N_D_MARK, +}; +static const unsigned int hscif0_data_e_pins[] = { + /* RX, TX */ + RCAR_GP_PIN(2, 21), RCAR_GP_PIN(2, 22), +}; +static const unsigned int hscif0_data_e_mux[] = { + HRX0_E_MARK, HTX0_E_MARK, +}; +static const unsigned int hscif0_ctrl_e_pins[] = { + /* RTS, CTS */ + RCAR_GP_PIN(2, 24), RCAR_GP_PIN(2, 23), +}; +static const unsigned int hscif0_ctrl_e_mux[] = { + HRTS0_N_E_MARK, HCTS0_N_E_MARK, +}; +static const unsigned int hscif0_data_f_pins[] = { + /* RX, TX */ + RCAR_GP_PIN(2, 23), RCAR_GP_PIN(2, 25), +}; +static const unsigned int hscif0_data_f_mux[] = { + HRX0_F_MARK, HTX0_F_MARK, +}; +static const unsigned int hscif0_ctrl_f_pins[] = { + /* RTS, CTS */ + RCAR_GP_PIN(2, 26), RCAR_GP_PIN(2, 24), +}; +static const unsigned int hscif0_ctrl_f_mux[] = { + HRTS0_N_F_MARK, HCTS0_N_F_MARK, +}; +/* - HSCIF1 ----------------------------------------------------------------- */ +static const unsigned int hscif1_data_pins[] = { + /* RX, TX */ + RCAR_GP_PIN(4, 28), RCAR_GP_PIN(4, 29), +}; +static const unsigned int hscif1_data_mux[] = { + HRX1_MARK, HTX1_MARK, +}; +static const unsigned int hscif1_clk_pins[] = { + /* SCK */ + RCAR_GP_PIN(4, 27), +}; +static const unsigned int hscif1_clk_mux[] = { + HSCK1_MARK, +}; +static const unsigned int hscif1_ctrl_pins[] = { + /* RTS, CTS */ + RCAR_GP_PIN(4, 31), RCAR_GP_PIN(4, 30), +}; +static const unsigned int hscif1_ctrl_mux[] = { + HRTS1_N_MARK, HCTS1_N_MARK, +}; +static const unsigned int hscif1_data_b_pins[] = { + /* RX, TX */ + RCAR_GP_PIN(1, 12), RCAR_GP_PIN(1, 18), +}; +static const unsigned int hscif1_data_b_mux[] = { + HRX1_B_MARK, HTX1_B_MARK, +}; +static const unsigned int hscif1_clk_b_pins[] = { + /* SCK */ + RCAR_GP_PIN(1, 28), +}; +static const unsigned int hscif1_clk_b_mux[] = { + HSCK1_B_MARK, +}; +static const unsigned int hscif1_ctrl_b_pins[] = { + /* RTS, CTS */ + RCAR_GP_PIN(1, 14), RCAR_GP_PIN(1, 13), +}; +static const unsigned int hscif1_ctrl_b_mux[] = { + HRTS1_N_B_MARK, HCTS1_N_B_MARK, +}; /* - SCIFA0 ----------------------------------------------------------------- */ static const unsigned int scifa0_data_pins[] = { /* RXD, TXD */ @@ -2591,10 +2726,37 @@ static const struct sh_pfc_pin_group pinmux_groups[] = { SH_PFC_PIN_GROUP(eth_magic), SH_PFC_PIN_GROUP(eth_mdio), SH_PFC_PIN_GROUP(eth_rmii), + SH_PFC_PIN_GROUP(hscif0_data), + SH_PFC_PIN_GROUP(hscif0_clk), + SH_PFC_PIN_GROUP(hscif0_ctrl), + SH_PFC_PIN_GROUP(hscif0_data_b), + SH_PFC_PIN_GROUP(hscif0_ctrl_b), + SH_PFC_PIN_GROUP(hscif0_data_c), + SH_PFC_PIN_GROUP(hscif0_ctrl_c), + SH_PFC_PIN_GROUP(hscif0_data_d), + SH_PFC_PIN_GROUP(hscif0_ctrl_d), + SH_PFC_PIN_GROUP(hscif0_data_e), + SH_PFC_PIN_GROUP(hscif0_ctrl_e), + SH_PFC_PIN_GROUP(hscif0_data_f), + SH_PFC_PIN_GROUP(hscif0_ctrl_f), + SH_PFC_PIN_GROUP(hscif1_data), + SH_PFC_PIN_GROUP(hscif1_clk), + SH_PFC_PIN_GROUP(hscif1_ctrl), + SH_PFC_PIN_GROUP(hscif1_data_b), + SH_PFC_PIN_GROUP(hscif1_clk_b), + SH_PFC_PIN_GROUP(hscif1_ctrl_b), SH_PFC_PIN_GROUP(intc_irq0), SH_PFC_PIN_GROUP(intc_irq1), SH_PFC_PIN_GROUP(intc_irq2), SH_PFC_PIN_GROUP(intc_irq3), + SH_PFC_PIN_GROUP(mmc0_data1), + SH_PFC_PIN_GROUP(mmc0_data4), + SH_PFC_PIN_GROUP(mmc0_data8), + SH_PFC_PIN_GROUP(mmc0_ctrl), + SH_PFC_PIN_GROUP(mmc1_data1), + SH_PFC_PIN_GROUP(mmc1_data4), + SH_PFC_PIN_GROUP(mmc1_data8), + SH_PFC_PIN_GROUP(mmc1_ctrl), SH_PFC_PIN_GROUP(scif0_data), SH_PFC_PIN_GROUP(scif0_clk), SH_PFC_PIN_GROUP(scif0_ctrl), @@ -2659,18 +2821,6 @@ static const struct sh_pfc_pin_group pinmux_groups[] = { SH_PFC_PIN_GROUP(scifb2_clk_b), SH_PFC_PIN_GROUP(scifb2_ctrl_b), SH_PFC_PIN_GROUP(scifb2_data_c), - SH_PFC_PIN_GROUP(tpu0_to0), - SH_PFC_PIN_GROUP(tpu0_to1), - SH_PFC_PIN_GROUP(tpu0_to2), - SH_PFC_PIN_GROUP(tpu0_to3), - SH_PFC_PIN_GROUP(mmc0_data1), - SH_PFC_PIN_GROUP(mmc0_data4), - SH_PFC_PIN_GROUP(mmc0_data8), - SH_PFC_PIN_GROUP(mmc0_ctrl), - SH_PFC_PIN_GROUP(mmc1_data1), - SH_PFC_PIN_GROUP(mmc1_data4), - SH_PFC_PIN_GROUP(mmc1_data8), - SH_PFC_PIN_GROUP(mmc1_ctrl), SH_PFC_PIN_GROUP(sdhi0_data1), SH_PFC_PIN_GROUP(sdhi0_data4), SH_PFC_PIN_GROUP(sdhi0_ctrl), @@ -2691,6 +2841,10 @@ static const struct sh_pfc_pin_group pinmux_groups[] = { SH_PFC_PIN_GROUP(sdhi3_ctrl), SH_PFC_PIN_GROUP(sdhi3_cd), SH_PFC_PIN_GROUP(sdhi3_wp), + SH_PFC_PIN_GROUP(tpu0_to0), + SH_PFC_PIN_GROUP(tpu0_to1), + SH_PFC_PIN_GROUP(tpu0_to2), + SH_PFC_PIN_GROUP(tpu0_to3), }; static const char * const eth_groups[] = { @@ -2726,6 +2880,31 @@ static const char * const scif1_groups[] = { "scif1_clk_e", }; +static const char * const hscif0_groups[] = { + "hscif0_data", + "hscif0_clk", + "hscif0_ctrl", + "hscif0_data_b", + "hscif0_ctrl_b", + "hscif0_data_c", + "hscif0_ctrl_c", + "hscif0_data_d", + "hscif0_ctrl_d", + "hscif0_data_e", + "hscif0_ctrl_e", + "hscif0_data_f", + "hscif0_ctrl_f", +}; + +static const char * const hscif1_groups[] = { + "hscif1_data", + "hscif1_clk", + "hscif1_ctrl", + "hscif1_data_b", + "hscif1_clk_b", + "hscif1_ctrl_b", +}; + static const char * const scifa0_groups[] = { "scifa0_data", "scifa0_clk", @@ -2850,7 +3029,11 @@ static const char * const sdhi3_groups[] = { static const struct sh_pfc_function pinmux_functions[] = { SH_PFC_FUNCTION(eth), + SH_PFC_FUNCTION(hscif0), + SH_PFC_FUNCTION(hscif1), SH_PFC_FUNCTION(intc), + SH_PFC_FUNCTION(mmc0), + SH_PFC_FUNCTION(mmc1), SH_PFC_FUNCTION(scif0), SH_PFC_FUNCTION(scif1), SH_PFC_FUNCTION(scifa0), @@ -2859,13 +3042,11 @@ static const struct sh_pfc_function pinmux_functions[] = { SH_PFC_FUNCTION(scifb0), SH_PFC_FUNCTION(scifb1), SH_PFC_FUNCTION(scifb2), - SH_PFC_FUNCTION(tpu0), - SH_PFC_FUNCTION(mmc0), - SH_PFC_FUNCTION(mmc1), SH_PFC_FUNCTION(sdhi0), SH_PFC_FUNCTION(sdhi1), SH_PFC_FUNCTION(sdhi2), SH_PFC_FUNCTION(sdhi3), + SH_PFC_FUNCTION(tpu0), }; static struct pinmux_cfg_reg pinmux_config_regs[] = { -- cgit v1.2.3 From 159f8a0209aff155af7f6fcdedd4a4484dd19c23 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Tue, 21 May 2013 13:40:06 +0200 Subject: gpio-rcar: Add DT support Add DT bindings for the gpio-rcar driver and read the device configuration from the DT node at probe time if available. Cc: devicetree-discuss@lists.ozlabs.org Signed-off-by: Laurent Pinchart Signed-off-by: Simon Horman --- .../devicetree/bindings/gpio/renesas,gpio-rcar.txt | 52 +++++++++++++++++ drivers/gpio/gpio-rcar.c | 66 ++++++++++++++++++---- 2 files changed, 108 insertions(+), 10 deletions(-) create mode 100644 Documentation/devicetree/bindings/gpio/renesas,gpio-rcar.txt diff --git a/Documentation/devicetree/bindings/gpio/renesas,gpio-rcar.txt b/Documentation/devicetree/bindings/gpio/renesas,gpio-rcar.txt new file mode 100644 index 000000000000..46d76a004246 --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/renesas,gpio-rcar.txt @@ -0,0 +1,52 @@ +* Renesas R-Car GPIO Controller + +Required Properties: + + - compatible: should be one of the following. + - "renesas,gpio-r8a7778": for R8A7778 (R-Mobile M1) compatible GPIO controller. + - "renesas,gpio-r8a7779": for R8A7779 (R-Car H1) compatible GPIO controller. + - "renesas,gpio-r8a7790": for R8A7790 (R-Car H2) compatible GPIO controller. + - "renesas,gpio-rcar": for generic R-Car GPIO controller. + + - reg: Base address and length of each memory resource used by the GPIO + controller hardware module. + + - interrupt-parent: phandle of the parent interrupt controller. + - interrupts: Interrupt specifier for the controllers interrupt. + + - gpio-controller: Marks the device node as a gpio controller. + - #gpio-cells: Should be 2. The first cell is the GPIO number and the second + cell is used to specify optional parameters as bit flags. Only the GPIO + active low flag (bit 0) is currently supported. + - gpio-ranges: Range of pins managed by the GPIO controller as a 4-cells + tuple using the following syntax. + + <[phandle of the pin controller node] + 0 + [index of the first pin] + [number of pins]> + +Please refer to gpio.txt in this directory for details of the common GPIO +bindings used by client devices. + +Example: R8A7779 (R-Car H1) GPIO controller nodes + + gpio0: gpio@ffc40000 { + compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar"; + reg = <0xffc40000 0x2c>; + interrupt-parent = <&gic>; + interrupts = <0 141 0x4>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 0 32>; + }; + ... + gpio6: gpio@ffc46000 { + compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar"; + reg = <0xffc46000 0x2c>; + interrupt-parent = <&gic>; + interrupts = <0 147 0x4>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 192 9>; + }; diff --git a/drivers/gpio/gpio-rcar.c b/drivers/gpio/gpio-rcar.c index d173d56dbb8c..5a693dd0ac7a 100644 --- a/drivers/gpio/gpio-rcar.c +++ b/drivers/gpio/gpio-rcar.c @@ -51,6 +51,8 @@ struct gpio_rcar_priv { #define FILONOFF 0x28 #define BOTHEDGE 0x4c +#define RCAR_MAX_GPIO_PER_BANK 32 + static inline u32 gpio_rcar_read(struct gpio_rcar_priv *p, int offs) { return ioread32(p->base + offs); @@ -274,9 +276,39 @@ static struct irq_domain_ops gpio_rcar_irq_domain_ops = { .map = gpio_rcar_irq_domain_map, }; +static void gpio_rcar_parse_pdata(struct gpio_rcar_priv *p) +{ + struct gpio_rcar_config *pdata = p->pdev->dev.platform_data; +#ifdef CONFIG_OF + struct device_node *np = p->pdev->dev.of_node; + struct of_phandle_args args; + int ret; +#endif + + if (pdata) + p->config = *pdata; +#ifdef CONFIG_OF + else if (np) { + ret = of_parse_phandle_with_args(np, "gpio-ranges", + "#gpio-range-cells", 0, &args); + p->config.number_of_pins = ret == 0 && args.args_count == 3 + ? args.args[2] + : RCAR_MAX_GPIO_PER_BANK; + p->config.gpio_base = -1; + } +#endif + + if (p->config.number_of_pins == 0 || + p->config.number_of_pins > RCAR_MAX_GPIO_PER_BANK) { + dev_warn(&p->pdev->dev, + "Invalid number of gpio lines %u, using %u\n", + p->config.number_of_pins, RCAR_MAX_GPIO_PER_BANK); + p->config.number_of_pins = RCAR_MAX_GPIO_PER_BANK; + } +} + static int gpio_rcar_probe(struct platform_device *pdev) { - struct gpio_rcar_config *pdata = pdev->dev.platform_data; struct gpio_rcar_priv *p; struct resource *io, *irq; struct gpio_chip *gpio_chip; @@ -291,14 +323,14 @@ static int gpio_rcar_probe(struct platform_device *pdev) goto err0; } - /* deal with driver instance configuration */ - if (pdata) - p->config = *pdata; - p->pdev = pdev; - platform_set_drvdata(pdev, p); spin_lock_init(&p->lock); + /* Get device configuration from DT node or platform data. */ + gpio_rcar_parse_pdata(p); + + platform_set_drvdata(pdev, p); + io = platform_get_resource(pdev, IORESOURCE_MEM, 0); irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0); @@ -325,6 +357,7 @@ static int gpio_rcar_probe(struct platform_device *pdev) gpio_chip->set = gpio_rcar_set; gpio_chip->to_irq = gpio_rcar_to_irq; gpio_chip->label = name; + gpio_chip->dev = &pdev->dev; gpio_chip->owner = THIS_MODULE; gpio_chip->base = p->config.gpio_base; gpio_chip->ngpio = p->config.number_of_pins; @@ -371,10 +404,12 @@ static int gpio_rcar_probe(struct platform_device *pdev) p->config.irq_base, ret); } - ret = gpiochip_add_pin_range(gpio_chip, p->config.pctl_name, 0, - gpio_chip->base, gpio_chip->ngpio); - if (ret < 0) - dev_warn(&pdev->dev, "failed to add pin range\n"); + if (p->config.pctl_name) { + ret = gpiochip_add_pin_range(gpio_chip, p->config.pctl_name, 0, + gpio_chip->base, gpio_chip->ngpio); + if (ret < 0) + dev_warn(&pdev->dev, "failed to add pin range\n"); + } return 0; @@ -397,11 +432,22 @@ static int gpio_rcar_remove(struct platform_device *pdev) return 0; } +#ifdef CONFIG_OF +static const struct of_device_id gpio_rcar_of_table[] = { + { + .compatible = "renesas,gpio-rcar", + }, +}; + +MODULE_DEVICE_TABLE(of, gpio_rcar_of_table); +#endif + static struct platform_driver gpio_rcar_device_driver = { .probe = gpio_rcar_probe, .remove = gpio_rcar_remove, .driver = { .name = "gpio_rcar", + .of_match_table = of_match_ptr(gpio_rcar_of_table), } }; -- cgit v1.2.3 From f34f37160c2960a763ed05d1e13b2ea75a48d0fb Mon Sep 17 00:00:00 2001 From: Gupta Pekon Date: Fri, 31 May 2013 17:31:30 +0530 Subject: ARM: OMAP2+: gpmc: get number of useable GPMC chip-selects via DT This patch enables usage of DT property 'gpmc,num-cs' as already documented in Documentation/devicetree/bindings/bus/ti-gpmc.txt Though GPMC hardware supports upto 8 chip-selects, but all chip-selects may not be available for use because: - chip-select pin may not be bonded out at SoC device boundary. - chip-select pin-mux may conflict with other pins usage. - board level constrains. gpmc,num-cs allows user to configure maximum number of GPMC chip-selects available for use on any given platform. This ensures: - GPMC child nodes having chip-selects within allowed range are only probed. - And un-used GPMC chip-selects remain blocked.(may be for security reasons). Signed-off-by: Gupta, Pekon Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/gpmc.c | 38 +++++++++++++++++++++++++++++--------- 1 file changed, 29 insertions(+), 9 deletions(-) diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c index 70d11ceec0d7..21b963604430 100644 --- a/arch/arm/mach-omap2/gpmc.c +++ b/arch/arm/mach-omap2/gpmc.c @@ -155,6 +155,7 @@ static struct resource gpmc_cs_mem[GPMC_CS_NUM]; static DEFINE_SPINLOCK(gpmc_mem_lock); /* Define chip-selects as reserved by default until probe completes */ static unsigned int gpmc_cs_map = ((1 << GPMC_CS_NUM) - 1); +static unsigned int gpmc_cs_num = GPMC_CS_NUM; static unsigned int gpmc_nr_waitpins; static struct device *gpmc_dev; static int gpmc_irq; @@ -521,8 +522,10 @@ static int gpmc_cs_remap(int cs, u32 base) int ret; u32 old_base, size; - if (cs > GPMC_CS_NUM) + if (cs > gpmc_cs_num) { + pr_err("%s: requested chip-select is disabled\n", __func__); return -ENODEV; + } gpmc_cs_get_memconf(cs, &old_base, &size); if (base == old_base) return 0; @@ -545,9 +548,10 @@ int gpmc_cs_request(int cs, unsigned long size, unsigned long *base) struct resource *res = &gpmc_cs_mem[cs]; int r = -1; - if (cs > GPMC_CS_NUM) + if (cs > gpmc_cs_num) { + pr_err("%s: requested chip-select is disabled\n", __func__); return -ENODEV; - + } size = gpmc_mem_align(size); if (size > (1 << GPMC_SECTION_SHIFT)) return -ENOMEM; @@ -582,7 +586,7 @@ EXPORT_SYMBOL(gpmc_cs_request); void gpmc_cs_free(int cs) { spin_lock(&gpmc_mem_lock); - if (cs >= GPMC_CS_NUM || cs < 0 || !gpmc_cs_reserved(cs)) { + if (cs >= gpmc_cs_num || cs < 0 || !gpmc_cs_reserved(cs)) { printk(KERN_ERR "Trying to free non-reserved GPMC CS%d\n", cs); BUG(); spin_unlock(&gpmc_mem_lock); @@ -777,7 +781,7 @@ static void gpmc_mem_exit(void) { int cs; - for (cs = 0; cs < GPMC_CS_NUM; cs++) { + for (cs = 0; cs < gpmc_cs_num; cs++) { if (!gpmc_cs_mem_enabled(cs)) continue; gpmc_cs_delete_mem(cs); @@ -798,7 +802,7 @@ static void gpmc_mem_init(void) gpmc_mem_root.end = GPMC_MEM_END; /* Reserve all regions that has been set up by bootloader */ - for (cs = 0; cs < GPMC_CS_NUM; cs++) { + for (cs = 0; cs < gpmc_cs_num; cs++) { u32 base, size; if (!gpmc_cs_mem_enabled(cs)) @@ -1526,6 +1530,20 @@ static int gpmc_probe_dt(struct platform_device *pdev) if (!of_id) return 0; + ret = of_property_read_u32(pdev->dev.of_node, "gpmc,num-cs", + &gpmc_cs_num); + if (ret < 0) { + pr_err("%s: number of chip-selects not defined\n", __func__); + return ret; + } else if (gpmc_cs_num < 1) { + pr_err("%s: all chip-selects are disabled\n", __func__); + return -EINVAL; + } else if (gpmc_cs_num > GPMC_CS_NUM) { + pr_err("%s: number of supported chip-selects cannot be > %d\n", + __func__, GPMC_CS_NUM); + return -EINVAL; + } + ret = of_property_read_u32(pdev->dev.of_node, "gpmc,num-waitpins", &gpmc_nr_waitpins); if (ret < 0) { @@ -1623,8 +1641,10 @@ static int gpmc_probe(struct platform_device *pdev) /* Now the GPMC is initialised, unreserve the chip-selects */ gpmc_cs_map = 0; - if (!pdev->dev.of_node) + if (!pdev->dev.of_node) { + gpmc_cs_num = GPMC_CS_NUM; gpmc_nr_waitpins = GPMC_NR_WAITPINS; + } rc = gpmc_probe_dt(pdev); if (rc < 0) { @@ -1728,7 +1748,7 @@ void omap3_gpmc_save_context(void) gpmc_context.prefetch_config1 = gpmc_read_reg(GPMC_PREFETCH_CONFIG1); gpmc_context.prefetch_config2 = gpmc_read_reg(GPMC_PREFETCH_CONFIG2); gpmc_context.prefetch_control = gpmc_read_reg(GPMC_PREFETCH_CONTROL); - for (i = 0; i < GPMC_CS_NUM; i++) { + for (i = 0; i < gpmc_cs_num; i++) { gpmc_context.cs_context[i].is_valid = gpmc_cs_mem_enabled(i); if (gpmc_context.cs_context[i].is_valid) { gpmc_context.cs_context[i].config1 = @@ -1760,7 +1780,7 @@ void omap3_gpmc_restore_context(void) gpmc_write_reg(GPMC_PREFETCH_CONFIG1, gpmc_context.prefetch_config1); gpmc_write_reg(GPMC_PREFETCH_CONFIG2, gpmc_context.prefetch_config2); gpmc_write_reg(GPMC_PREFETCH_CONTROL, gpmc_context.prefetch_control); - for (i = 0; i < GPMC_CS_NUM; i++) { + for (i = 0; i < gpmc_cs_num; i++) { if (gpmc_context.cs_context[i].is_valid) { gpmc_cs_write_reg(i, GPMC_CS_CONFIG1, gpmc_context.cs_context[i].config1); -- cgit v1.2.3 From b3f5525c55ce5cb67af06f04dbbf28358da23a2c Mon Sep 17 00:00:00 2001 From: avinash philip Date: Wed, 12 Jun 2013 16:30:56 +0530 Subject: ARM: OMAP2+: gpmc: Converts GPMC driver to pm_runtime capable Support for pm_runtime add to GPMC driver. Signed-off-by: Philip Avinash Signed-off-by: Pekon Gupta Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/gpmc.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c index 21b963604430..bac18b3ebbfb 100644 --- a/arch/arm/mach-omap2/gpmc.c +++ b/arch/arm/mach-omap2/gpmc.c @@ -30,6 +30,7 @@ #include #include #include +#include #include @@ -1608,7 +1609,8 @@ static int gpmc_probe(struct platform_device *pdev) return PTR_ERR(gpmc_l3_clk); } - clk_prepare_enable(gpmc_l3_clk); + pm_runtime_enable(&pdev->dev); + pm_runtime_get_sync(&pdev->dev); gpmc_dev = &pdev->dev; @@ -1648,7 +1650,7 @@ static int gpmc_probe(struct platform_device *pdev) rc = gpmc_probe_dt(pdev); if (rc < 0) { - clk_disable_unprepare(gpmc_l3_clk); + pm_runtime_put_sync(&pdev->dev); clk_put(gpmc_l3_clk); dev_err(gpmc_dev, "failed to probe DT parameters\n"); return rc; @@ -1661,6 +1663,8 @@ static int gpmc_remove(struct platform_device *pdev) { gpmc_free_irq(); gpmc_mem_exit(); + pm_runtime_put_sync(&pdev->dev); + pm_runtime_disable(&pdev->dev); gpmc_dev = NULL; return 0; } -- cgit v1.2.3 From 0a6ea54ff0fd1ac72223af44939fcd7197537b14 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Tue, 11 Jun 2013 11:42:17 +0000 Subject: pinctrl: r8a7790: fix two pin numbers Fix two erroneous MMCIF1 pin numbers on r8a7790. Signed-off-by: Guennadi Liakhovetski Acked-by: Laurent Pinchart Signed-off-by: Simon Horman --- drivers/pinctrl/sh-pfc/pfc-r8a7790.c | 16 +++++++--------- 1 file changed, 7 insertions(+), 9 deletions(-) diff --git a/drivers/pinctrl/sh-pfc/pfc-r8a7790.c b/drivers/pinctrl/sh-pfc/pfc-r8a7790.c index 1e7a5eb70a00..14f3ec267e1f 100644 --- a/drivers/pinctrl/sh-pfc/pfc-r8a7790.c +++ b/drivers/pinctrl/sh-pfc/pfc-r8a7790.c @@ -2506,8 +2506,7 @@ static const unsigned int tpu0_to3_pins[] = { static const unsigned int tpu0_to3_mux[] = { TPU0TO3_MARK, }; - -/* - MMCIF ------------------------------------------------------------------ */ +/* - MMCIF0 ----------------------------------------------------------------- */ static const unsigned int mmc0_data1_pins[] = { /* D[0] */ RCAR_GP_PIN(3, 18), @@ -2541,7 +2540,7 @@ static const unsigned int mmc0_ctrl_pins[] = { static const unsigned int mmc0_ctrl_mux[] = { MMC0_CLK_MARK, MMC0_CMD_MARK, }; - +/* - MMCIF1 ----------------------------------------------------------------- */ static const unsigned int mmc1_data1_pins[] = { /* D[0] */ RCAR_GP_PIN(3, 26), @@ -2562,7 +2561,7 @@ static const unsigned int mmc1_data8_pins[] = { RCAR_GP_PIN(3, 26), RCAR_GP_PIN(3, 27), RCAR_GP_PIN(3, 28), RCAR_GP_PIN(3, 29), RCAR_GP_PIN(3, 30), RCAR_GP_PIN(3, 31), - RCAR_GP_PIN(3, 13), RCAR_GP_PIN(3, 14), + RCAR_GP_PIN(3, 14), RCAR_GP_PIN(3, 15), }; static const unsigned int mmc1_data8_mux[] = { MMC1_D0_MARK, MMC1_D1_MARK, MMC1_D2_MARK, MMC1_D3_MARK, @@ -2575,8 +2574,7 @@ static const unsigned int mmc1_ctrl_pins[] = { static const unsigned int mmc1_ctrl_mux[] = { MMC1_CLK_MARK, MMC1_CMD_MARK, }; - -/* - SDHI ------------------------------------------------------------------- */ +/* - SDHI0 ------------------------------------------------------------------ */ static const unsigned int sdhi0_data1_pins[] = { /* D0 */ RCAR_GP_PIN(3, 2), @@ -2612,7 +2610,7 @@ static const unsigned int sdhi0_wp_pins[] = { static const unsigned int sdhi0_wp_mux[] = { SD0_WP_MARK, }; - +/* - SDHI1 ------------------------------------------------------------------ */ static const unsigned int sdhi1_data1_pins[] = { /* D0 */ RCAR_GP_PIN(3, 10), @@ -2648,7 +2646,7 @@ static const unsigned int sdhi1_wp_pins[] = { static const unsigned int sdhi1_wp_mux[] = { SD1_WP_MARK, }; - +/* - SDHI2 ------------------------------------------------------------------ */ static const unsigned int sdhi2_data1_pins[] = { /* D0 */ RCAR_GP_PIN(3, 18), @@ -2684,7 +2682,7 @@ static const unsigned int sdhi2_wp_pins[] = { static const unsigned int sdhi2_wp_mux[] = { SD2_WP_MARK, }; - +/* - SDHI3 ------------------------------------------------------------------ */ static const unsigned int sdhi3_data1_pins[] = { /* D0 */ RCAR_GP_PIN(3, 26), -- cgit v1.2.3 From cd622017eb3e0ab841502df88fb7fda3c3a58eb9 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Tue, 11 Jun 2013 19:02:20 -0700 Subject: sh-pfc: r8a7778: tidyup MMC_D1 pin MMC_D1 is RCAR_GP_PIN(1, 8), not RCAR_GP_PIN(2, 8) Reported-by: Yusuke Goda Signed-off-by: Kuninori Morimoto Acked-by: Laurent Pinchart Signed-off-by: Simon Horman --- drivers/pinctrl/sh-pfc/pfc-r8a7778.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/pinctrl/sh-pfc/pfc-r8a7778.c b/drivers/pinctrl/sh-pfc/pfc-r8a7778.c index 1dcbabcd7b3c..f9039102bb43 100644 --- a/drivers/pinctrl/sh-pfc/pfc-r8a7778.c +++ b/drivers/pinctrl/sh-pfc/pfc-r8a7778.c @@ -1447,11 +1447,11 @@ MMC_PFC_PINS(mmc_ctrl, RCAR_GP_PIN(1, 5), RCAR_GP_PIN(1, 6)); MMC_PFC_CTRL(mmc_ctrl, MMC_CLK, MMC_CMD); MMC_PFC_PINS(mmc_data1, RCAR_GP_PIN(1, 7)); MMC_PFC_DAT1(mmc_data1, MMC_D0); -MMC_PFC_PINS(mmc_data4, RCAR_GP_PIN(1, 7), RCAR_GP_PIN(2, 8), +MMC_PFC_PINS(mmc_data4, RCAR_GP_PIN(1, 7), RCAR_GP_PIN(1, 8), RCAR_GP_PIN(0, 5), RCAR_GP_PIN(0, 6)); MMC_PFC_DAT4(mmc_data4, MMC_D0, MMC_D1, MMC_D2, MMC_D3); -MMC_PFC_PINS(mmc_data8, RCAR_GP_PIN(1, 7), RCAR_GP_PIN(2, 8), +MMC_PFC_PINS(mmc_data8, RCAR_GP_PIN(1, 7), RCAR_GP_PIN(1, 8), RCAR_GP_PIN(0, 5), RCAR_GP_PIN(0, 6), RCAR_GP_PIN(1, 4), RCAR_GP_PIN(1, 0), RCAR_GP_PIN(0, 30), RCAR_GP_PIN(0, 31)); -- cgit v1.2.3 From b536dd412b4364df2f9495c6550ee38f6ad3b0fe Mon Sep 17 00:00:00 2001 From: avinash philip Date: Tue, 18 Jun 2013 00:16:38 +0530 Subject: ARM: OMAP2+: gpmc: Low power transition support GPMC is hardware controller for external memory interfaces. This patch adds suspend/resume support for GPMC driver. It also preserves GPMC register configurations across device low-power states in which GPMC hardware can be powered-off. gpmc_suspend()/gpmc_resume() are called by default by core PM framework as part of driver's runtime PM callbacks. Signed-off-by: Philip Avinash Signed-off-by: Pekon Gupta Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/gpmc.c | 21 +++++++++++++++++++-- 1 file changed, 19 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c index bac18b3ebbfb..1c7969e965d7 100644 --- a/arch/arm/mach-omap2/gpmc.c +++ b/arch/arm/mach-omap2/gpmc.c @@ -1669,6 +1669,24 @@ static int gpmc_remove(struct platform_device *pdev) return 0; } +#ifdef CONFIG_PM_SLEEP +static int gpmc_suspend(struct device *dev) +{ + omap3_gpmc_save_context(); + pm_runtime_put_sync(dev); + return 0; +} + +static int gpmc_resume(struct device *dev) +{ + pm_runtime_get_sync(dev); + omap3_gpmc_restore_context(); + return 0; +} +#endif + +static SIMPLE_DEV_PM_OPS(gpmc_pm_ops, gpmc_suspend, gpmc_resume); + static struct platform_driver gpmc_driver = { .probe = gpmc_probe, .remove = gpmc_remove, @@ -1676,6 +1694,7 @@ static struct platform_driver gpmc_driver = { .name = DEVICE_NAME, .owner = THIS_MODULE, .of_match_table = of_match_ptr(gpmc_dt_ids), + .pm = &gpmc_pm_ops, }, }; @@ -1738,7 +1757,6 @@ static irqreturn_t gpmc_handle_irq(int irq, void *dev) return IRQ_HANDLED; } -#ifdef CONFIG_ARCH_OMAP3 static struct omap3_gpmc_regs gpmc_context; void omap3_gpmc_save_context(void) @@ -1803,4 +1821,3 @@ void omap3_gpmc_restore_context(void) } } } -#endif /* CONFIG_ARCH_OMAP3 */ -- cgit v1.2.3 From c2c70a7905dbf97472e9a5fa6919675462373994 Mon Sep 17 00:00:00 2001 From: Heiko Stuebner Date: Wed, 19 Jun 2013 02:41:14 +0900 Subject: pinctrl: s3c24xx: use correct header for chained_irq functions chained_irq_enter and chained_irq_exit moved to a real header under linux/pinctrl instead of asm/. Update the pinctrl driver to use the correct header and fix the build error. Signed-off-by: Heiko Stuebner Acked-by: Linus Walleij ` Signed-off-by: Kukjin Kim --- drivers/pinctrl/pinctrl-s3c24xx.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/pinctrl/pinctrl-s3c24xx.c b/drivers/pinctrl/pinctrl-s3c24xx.c index c8b03996cdcb..24446daaad7d 100644 --- a/drivers/pinctrl/pinctrl-s3c24xx.c +++ b/drivers/pinctrl/pinctrl-s3c24xx.c @@ -19,12 +19,11 @@ #include #include #include +#include #include #include #include -#include - #include "pinctrl-samsung.h" #define NUM_EINT 24 -- cgit v1.2.3 From 3799279f70f1aa4fc452f1af59031122c93522aa Mon Sep 17 00:00:00 2001 From: Padmavathi Venna Date: Tue, 18 Jun 2013 00:02:08 +0900 Subject: ARM: dts: use #include for all device trees for Samsung Replace /include/ (dtc) with #include (C pre-processor) for all Samsung DT files Signed-off-by: Padmavathi Venna Reviewed-by: Sylwester Nawrocki Reviewed-by: Doug Anderson Signed-off-by: Kukjin Kim --- arch/arm/boot/dts/exynos4.dtsi | 2 +- arch/arm/boot/dts/exynos4210-origen.dts | 2 +- arch/arm/boot/dts/exynos4210-smdkv310.dts | 2 +- arch/arm/boot/dts/exynos4210-trats.dts | 2 +- arch/arm/boot/dts/exynos4210-universal_c210.dts | 2 +- arch/arm/boot/dts/exynos4210.dtsi | 4 ++-- arch/arm/boot/dts/exynos4212.dtsi | 2 +- arch/arm/boot/dts/exynos4412-odroidx.dts | 2 +- arch/arm/boot/dts/exynos4412-origen.dts | 2 +- arch/arm/boot/dts/exynos4412-smdk4412.dts | 2 +- arch/arm/boot/dts/exynos4412.dtsi | 2 +- arch/arm/boot/dts/exynos4x12.dtsi | 4 ++-- arch/arm/boot/dts/exynos5250-arndale.dts | 2 +- arch/arm/boot/dts/exynos5250-smdk5250.dts | 2 +- arch/arm/boot/dts/exynos5250-snow.dts | 4 ++-- arch/arm/boot/dts/exynos5250.dtsi | 4 ++-- arch/arm/boot/dts/exynos5440-sd5v1.dts | 2 +- arch/arm/boot/dts/exynos5440-ssdk5440.dts | 2 +- arch/arm/boot/dts/exynos5440.dtsi | 2 +- arch/arm/boot/dts/s3c2416-smdk2416.dts | 2 +- arch/arm/boot/dts/s3c2416.dtsi | 4 ++-- arch/arm/boot/dts/s3c24xx.dtsi | 2 +- 22 files changed, 27 insertions(+), 27 deletions(-) diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi index bed40ee2e4f6..3f94fe8e3706 100644 --- a/arch/arm/boot/dts/exynos4.dtsi +++ b/arch/arm/boot/dts/exynos4.dtsi @@ -19,7 +19,7 @@ * published by the Free Software Foundation. */ -/include/ "skeleton.dtsi" +#include "skeleton.dtsi" / { interrupt-parent = <&gic>; diff --git a/arch/arm/boot/dts/exynos4210-origen.dts b/arch/arm/boot/dts/exynos4210-origen.dts index 08609b8bdaf1..382d8c7e2906 100644 --- a/arch/arm/boot/dts/exynos4210-origen.dts +++ b/arch/arm/boot/dts/exynos4210-origen.dts @@ -15,7 +15,7 @@ */ /dts-v1/; -/include/ "exynos4210.dtsi" +#include "exynos4210.dtsi" / { model = "Insignal Origen evaluation board based on Exynos4210"; diff --git a/arch/arm/boot/dts/exynos4210-smdkv310.dts b/arch/arm/boot/dts/exynos4210-smdkv310.dts index 91332b72acf5..9c01b718d29d 100644 --- a/arch/arm/boot/dts/exynos4210-smdkv310.dts +++ b/arch/arm/boot/dts/exynos4210-smdkv310.dts @@ -15,7 +15,7 @@ */ /dts-v1/; -/include/ "exynos4210.dtsi" +#include "exynos4210.dtsi" / { model = "Samsung smdkv310 evaluation board based on Exynos4210"; diff --git a/arch/arm/boot/dts/exynos4210-trats.dts b/arch/arm/boot/dts/exynos4210-trats.dts index 9a14484c7bb1..94eebffe3044 100644 --- a/arch/arm/boot/dts/exynos4210-trats.dts +++ b/arch/arm/boot/dts/exynos4210-trats.dts @@ -13,7 +13,7 @@ */ /dts-v1/; -/include/ "exynos4210.dtsi" +#include "exynos4210.dtsi" / { model = "Samsung Trats based on Exynos4210"; diff --git a/arch/arm/boot/dts/exynos4210-universal_c210.dts b/arch/arm/boot/dts/exynos4210-universal_c210.dts index 345cdb51dcb7..889cdada1ce9 100644 --- a/arch/arm/boot/dts/exynos4210-universal_c210.dts +++ b/arch/arm/boot/dts/exynos4210-universal_c210.dts @@ -13,7 +13,7 @@ */ /dts-v1/; -/include/ "exynos4210.dtsi" +#include "exynos4210.dtsi" / { model = "Samsung Universal C210 based on Exynos4210 rev0"; diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi index d4f8067e89ba..b7f358a93bcb 100644 --- a/arch/arm/boot/dts/exynos4210.dtsi +++ b/arch/arm/boot/dts/exynos4210.dtsi @@ -19,8 +19,8 @@ * published by the Free Software Foundation. */ -/include/ "exynos4.dtsi" -/include/ "exynos4210-pinctrl.dtsi" +#include "exynos4.dtsi" +#include "exynos4210-pinctrl.dtsi" / { compatible = "samsung,exynos4210"; diff --git a/arch/arm/boot/dts/exynos4212.dtsi b/arch/arm/boot/dts/exynos4212.dtsi index c0f60f49cea6..6f34d7f6ba7e 100644 --- a/arch/arm/boot/dts/exynos4212.dtsi +++ b/arch/arm/boot/dts/exynos4212.dtsi @@ -17,7 +17,7 @@ * published by the Free Software Foundation. */ -/include/ "exynos4x12.dtsi" +#include "exynos4x12.dtsi" / { compatible = "samsung,exynos4212"; diff --git a/arch/arm/boot/dts/exynos4412-odroidx.dts b/arch/arm/boot/dts/exynos4412-odroidx.dts index 867d9452619b..46c678ee119c 100644 --- a/arch/arm/boot/dts/exynos4412-odroidx.dts +++ b/arch/arm/boot/dts/exynos4412-odroidx.dts @@ -12,7 +12,7 @@ */ /dts-v1/; -/include/ "exynos4412.dtsi" +#include "exynos4412.dtsi" / { model = "Hardkernel ODROID-X board based on Exynos4412"; diff --git a/arch/arm/boot/dts/exynos4412-origen.dts b/arch/arm/boot/dts/exynos4412-origen.dts index ca73c42f77e1..7993641cb32a 100644 --- a/arch/arm/boot/dts/exynos4412-origen.dts +++ b/arch/arm/boot/dts/exynos4412-origen.dts @@ -13,7 +13,7 @@ */ /dts-v1/; -/include/ "exynos4412.dtsi" +#include "exynos4412.dtsi" / { model = "Insignal Origen evaluation board based on Exynos4412"; diff --git a/arch/arm/boot/dts/exynos4412-smdk4412.dts b/arch/arm/boot/dts/exynos4412-smdk4412.dts index a8ba195c41ac..ad316a1ee9e0 100644 --- a/arch/arm/boot/dts/exynos4412-smdk4412.dts +++ b/arch/arm/boot/dts/exynos4412-smdk4412.dts @@ -13,7 +13,7 @@ */ /dts-v1/; -/include/ "exynos4412.dtsi" +#include "exynos4412.dtsi" / { model = "Samsung SMDK evaluation board based on Exynos4412"; diff --git a/arch/arm/boot/dts/exynos4412.dtsi b/arch/arm/boot/dts/exynos4412.dtsi index 270b389e0a1b..e743e677a9e2 100644 --- a/arch/arm/boot/dts/exynos4412.dtsi +++ b/arch/arm/boot/dts/exynos4412.dtsi @@ -17,7 +17,7 @@ * published by the Free Software Foundation. */ -/include/ "exynos4x12.dtsi" +#include "exynos4x12.dtsi" / { compatible = "samsung,exynos4412"; diff --git a/arch/arm/boot/dts/exynos4x12.dtsi b/arch/arm/boot/dts/exynos4x12.dtsi index 35cb2099d55e..01da194ba329 100644 --- a/arch/arm/boot/dts/exynos4x12.dtsi +++ b/arch/arm/boot/dts/exynos4x12.dtsi @@ -17,8 +17,8 @@ * published by the Free Software Foundation. */ -/include/ "exynos4.dtsi" -/include/ "exynos4x12-pinctrl.dtsi" +#include "exynos4.dtsi" +#include "exynos4x12-pinctrl.dtsi" / { aliases { diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts index c6db281a3430..abc7272c7afd 100644 --- a/arch/arm/boot/dts/exynos5250-arndale.dts +++ b/arch/arm/boot/dts/exynos5250-arndale.dts @@ -10,7 +10,7 @@ */ /dts-v1/; -/include/ "exynos5250.dtsi" +#include "exynos5250.dtsi" / { model = "Insignal Arndale evaluation board based on EXYNOS5250"; diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts index 1e21200b6d85..35a66dee4011 100644 --- a/arch/arm/boot/dts/exynos5250-smdk5250.dts +++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts @@ -10,7 +10,7 @@ */ /dts-v1/; -/include/ "exynos5250.dtsi" +#include "exynos5250.dtsi" / { model = "SAMSUNG SMDK5250 board based on EXYNOS5250"; diff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/exynos5250-snow.dts index 05244f150dd9..e79331dba12d 100644 --- a/arch/arm/boot/dts/exynos5250-snow.dts +++ b/arch/arm/boot/dts/exynos5250-snow.dts @@ -9,8 +9,8 @@ */ /dts-v1/; -/include/ "exynos5250.dtsi" -/include/ "cros5250-common.dtsi" +#include "exynos5250.dtsi" +#include "cros5250-common.dtsi" / { model = "Google Snow"; diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi index 8b1f9b63f9f7..5cfc5b78d951 100644 --- a/arch/arm/boot/dts/exynos5250.dtsi +++ b/arch/arm/boot/dts/exynos5250.dtsi @@ -17,8 +17,8 @@ * published by the Free Software Foundation. */ -/include/ "skeleton.dtsi" -/include/ "exynos5250-pinctrl.dtsi" +#include "skeleton.dtsi" +#include "exynos5250-pinctrl.dtsi" / { compatible = "samsung,exynos5250"; diff --git a/arch/arm/boot/dts/exynos5440-sd5v1.dts b/arch/arm/boot/dts/exynos5440-sd5v1.dts index f722a0263ac8..5b22508050da 100644 --- a/arch/arm/boot/dts/exynos5440-sd5v1.dts +++ b/arch/arm/boot/dts/exynos5440-sd5v1.dts @@ -10,7 +10,7 @@ */ /dts-v1/; -/include/ "exynos5440.dtsi" +#include "exynos5440.dtsi" / { model = "SAMSUNG SD5v1 board based on EXYNOS5440"; diff --git a/arch/arm/boot/dts/exynos5440-ssdk5440.dts b/arch/arm/boot/dts/exynos5440-ssdk5440.dts index 3aa65bb28020..f32cd77930a6 100644 --- a/arch/arm/boot/dts/exynos5440-ssdk5440.dts +++ b/arch/arm/boot/dts/exynos5440-ssdk5440.dts @@ -10,7 +10,7 @@ */ /dts-v1/; -/include/ "exynos5440.dtsi" +#include "exynos5440.dtsi" / { model = "SAMSUNG SSDK5440 board based on EXYNOS5440"; diff --git a/arch/arm/boot/dts/exynos5440.dtsi b/arch/arm/boot/dts/exynos5440.dtsi index 72c114cfbaa0..8b6f8f0c9171 100644 --- a/arch/arm/boot/dts/exynos5440.dtsi +++ b/arch/arm/boot/dts/exynos5440.dtsi @@ -9,7 +9,7 @@ * published by the Free Software Foundation. */ -/include/ "skeleton.dtsi" +#include "skeleton.dtsi" / { compatible = "samsung,exynos5440"; diff --git a/arch/arm/boot/dts/s3c2416-smdk2416.dts b/arch/arm/boot/dts/s3c2416-smdk2416.dts index ad1dd09c10eb..59594cf15998 100644 --- a/arch/arm/boot/dts/s3c2416-smdk2416.dts +++ b/arch/arm/boot/dts/s3c2416-smdk2416.dts @@ -9,7 +9,7 @@ */ /dts-v1/; -/include/ "s3c2416.dtsi" +#include "s3c2416.dtsi" / { model = "SMDK2416"; diff --git a/arch/arm/boot/dts/s3c2416.dtsi b/arch/arm/boot/dts/s3c2416.dtsi index 6809324934a3..e6555bdd81b8 100644 --- a/arch/arm/boot/dts/s3c2416.dtsi +++ b/arch/arm/boot/dts/s3c2416.dtsi @@ -8,8 +8,8 @@ * published by the Free Software Foundation. */ -/include/ "s3c24xx.dtsi" -/include/ "s3c2416-pinctrl.dtsi" +#include "s3c24xx.dtsi" +#include "s3c2416-pinctrl.dtsi" / { model = "Samsung S3C2416 SoC"; diff --git a/arch/arm/boot/dts/s3c24xx.dtsi b/arch/arm/boot/dts/s3c24xx.dtsi index cab46ff5fb4d..2d1d7dc9418a 100644 --- a/arch/arm/boot/dts/s3c24xx.dtsi +++ b/arch/arm/boot/dts/s3c24xx.dtsi @@ -8,7 +8,7 @@ * published by the Free Software Foundation. */ -/include/ "skeleton.dtsi" +#include "skeleton.dtsi" / { compatible = "samsung,s3c24xx"; -- cgit v1.2.3 From 1241ef94ccc3aeaeecf73b2889efd9bcd6ffa4f7 Mon Sep 17 00:00:00 2001 From: Padmavathi Venna Date: Tue, 18 Jun 2013 00:02:17 +0900 Subject: clk: samsung: register audio subsystem clocks using common clock framework Audio subsystem is introduced in s5pv210 and exynos platforms. This has seperate clock controller which can control i2s0 and pcm0 clocks. This patch registers the audio subsystem clocks with the common clock framework on Exynos family. Signed-off-by: Padmavathi Venna Reviewed-by: Sylwester Nawrocki Reviewed-by: Doug Anderson Acked-by: Mike Turquette Signed-off-by: Kukjin Kim --- .../devicetree/bindings/clock/clk-exynos-audss.txt | 64 ++++++++++ drivers/clk/samsung/Makefile | 1 + drivers/clk/samsung/clk-exynos-audss.c | 133 +++++++++++++++++++++ include/dt-bindings/clk/exynos-audss-clk.h | 25 ++++ 4 files changed, 223 insertions(+) create mode 100644 Documentation/devicetree/bindings/clock/clk-exynos-audss.txt create mode 100644 drivers/clk/samsung/clk-exynos-audss.c create mode 100644 include/dt-bindings/clk/exynos-audss-clk.h diff --git a/Documentation/devicetree/bindings/clock/clk-exynos-audss.txt b/Documentation/devicetree/bindings/clock/clk-exynos-audss.txt new file mode 100644 index 000000000000..a1201802f90d --- /dev/null +++ b/Documentation/devicetree/bindings/clock/clk-exynos-audss.txt @@ -0,0 +1,64 @@ +* Samsung Audio Subsystem Clock Controller + +The Samsung Audio Subsystem clock controller generates and supplies clocks +to Audio Subsystem block available in the S5PV210 and Exynos SoCs. The clock +binding described here is applicable to all SoC's in Exynos family. + +Required Properties: + +- compatible: should be one of the following: + - "samsung,exynos4210-audss-clock" - controller compatible with all Exynos4 SoCs. + - "samsung,exynos5250-audss-clock" - controller compatible with all Exynos5 SoCs. + +- reg: physical base address and length of the controller's register set. + +- #clock-cells: should be 1. + +The following is the list of clocks generated by the controller. Each clock is +assigned an identifier and client nodes use this identifier to specify the +clock which they consume. Some of the clocks are available only on a particular +Exynos4 SoC and this is specified where applicable. + +Provided clocks: + +Clock ID SoC (if specific) +----------------------------------------------- + +mout_audss 0 +mout_i2s 1 +dout_srp 2 +dout_aud_bus 3 +dout_i2s 4 +srp_clk 5 +i2s_bus 6 +sclk_i2s 7 +pcm_bus 8 +sclk_pcm 9 + +Example 1: An example of a clock controller node is listed below. + +clock_audss: audss-clock-controller@3810000 { + compatible = "samsung,exynos5250-audss-clock"; + reg = <0x03810000 0x0C>; + #clock-cells = <1>; +}; + +Example 2: I2S controller node that consumes the clock generated by the clock + controller. Refer to the standard clock bindings for information + about 'clocks' and 'clock-names' property. + +i2s0: i2s@03830000 { + compatible = "samsung,i2s-v5"; + reg = <0x03830000 0x100>; + dmas = <&pdma0 10 + &pdma0 9 + &pdma0 8>; + dma-names = "tx", "rx", "tx-sec"; + clocks = <&clock_audss EXYNOS_I2S_BUS>, + <&clock_audss EXYNOS_I2S_BUS>, + <&clock_audss EXYNOS_SCLK_I2S>, + <&clock_audss EXYNOS_MOUT_AUDSS>, + <&clock_audss EXYNOS_MOUT_I2S>; + clock-names = "iis", "i2s_opclk0", "i2s_opclk1", + "mout_audss", "mout_i2s"; +}; diff --git a/drivers/clk/samsung/Makefile b/drivers/clk/samsung/Makefile index b7c232e67425..187681013bdb 100644 --- a/drivers/clk/samsung/Makefile +++ b/drivers/clk/samsung/Makefile @@ -6,3 +6,4 @@ obj-$(CONFIG_COMMON_CLK) += clk.o clk-pll.o obj-$(CONFIG_ARCH_EXYNOS4) += clk-exynos4.o obj-$(CONFIG_SOC_EXYNOS5250) += clk-exynos5250.o obj-$(CONFIG_SOC_EXYNOS5440) += clk-exynos5440.o +obj-$(CONFIG_ARCH_EXYNOS) += clk-exynos-audss.o diff --git a/drivers/clk/samsung/clk-exynos-audss.c b/drivers/clk/samsung/clk-exynos-audss.c new file mode 100644 index 000000000000..9b1bbd52fd1f --- /dev/null +++ b/drivers/clk/samsung/clk-exynos-audss.c @@ -0,0 +1,133 @@ +/* + * Copyright (c) 2013 Samsung Electronics Co., Ltd. + * Author: Padmavathi Venna + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Common Clock Framework support for Audio Subsystem Clock Controller. +*/ + +#include +#include +#include +#include +#include + +#include + +static DEFINE_SPINLOCK(lock); +static struct clk **clk_table; +static void __iomem *reg_base; +static struct clk_onecell_data clk_data; + +#define ASS_CLK_SRC 0x0 +#define ASS_CLK_DIV 0x4 +#define ASS_CLK_GATE 0x8 + +static unsigned long reg_save[][2] = { + {ASS_CLK_SRC, 0}, + {ASS_CLK_DIV, 0}, + {ASS_CLK_GATE, 0}, +}; + +/* list of all parent clock list */ +static const char *mout_audss_p[] = { "fin_pll", "fout_epll" }; +static const char *mout_i2s_p[] = { "mout_audss", "cdclk0", "sclk_audio0" }; + +#ifdef CONFIG_PM_SLEEP +static int exynos_audss_clk_suspend(void) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(reg_save); i++) + reg_save[i][1] = readl(reg_base + reg_save[i][0]); + + return 0; +} + +static void exynos_audss_clk_resume(void) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(reg_save); i++) + writel(reg_save[i][1], reg_base + reg_save[i][0]); +} + +static struct syscore_ops exynos_audss_clk_syscore_ops = { + .suspend = exynos_audss_clk_suspend, + .resume = exynos_audss_clk_resume, +}; +#endif /* CONFIG_PM_SLEEP */ + +/* register exynos_audss clocks */ +void __init exynos_audss_clk_init(struct device_node *np) +{ + reg_base = of_iomap(np, 0); + if (!reg_base) { + pr_err("%s: failed to map audss registers\n", __func__); + return; + } + + clk_table = kzalloc(sizeof(struct clk *) * EXYNOS_AUDSS_MAX_CLKS, + GFP_KERNEL); + if (!clk_table) { + pr_err("%s: could not allocate clk lookup table\n", __func__); + return; + } + + clk_data.clks = clk_table; + clk_data.clk_num = EXYNOS_AUDSS_MAX_CLKS; + of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data); + + clk_table[EXYNOS_MOUT_AUDSS] = clk_register_mux(NULL, "mout_audss", + mout_audss_p, ARRAY_SIZE(mout_audss_p), 0, + reg_base + ASS_CLK_SRC, 0, 1, 0, &lock); + + clk_table[EXYNOS_MOUT_I2S] = clk_register_mux(NULL, "mout_i2s", + mout_i2s_p, ARRAY_SIZE(mout_i2s_p), 0, + reg_base + ASS_CLK_SRC, 2, 2, 0, &lock); + + clk_table[EXYNOS_DOUT_SRP] = clk_register_divider(NULL, "dout_srp", + "mout_audss", 0, reg_base + ASS_CLK_DIV, 0, 4, + 0, &lock); + + clk_table[EXYNOS_DOUT_AUD_BUS] = clk_register_divider(NULL, + "dout_aud_bus", "dout_srp", 0, + reg_base + ASS_CLK_DIV, 4, 4, 0, &lock); + + clk_table[EXYNOS_DOUT_I2S] = clk_register_divider(NULL, "dout_i2s", + "mout_i2s", 0, reg_base + ASS_CLK_DIV, 8, 4, 0, + &lock); + + clk_table[EXYNOS_SRP_CLK] = clk_register_gate(NULL, "srp_clk", + "dout_srp", CLK_SET_RATE_PARENT, + reg_base + ASS_CLK_GATE, 0, 0, &lock); + + clk_table[EXYNOS_I2S_BUS] = clk_register_gate(NULL, "i2s_bus", + "dout_aud_bus", CLK_SET_RATE_PARENT, + reg_base + ASS_CLK_GATE, 2, 0, &lock); + + clk_table[EXYNOS_SCLK_I2S] = clk_register_gate(NULL, "sclk_i2s", + "dout_i2s", CLK_SET_RATE_PARENT, + reg_base + ASS_CLK_GATE, 3, 0, &lock); + + clk_table[EXYNOS_PCM_BUS] = clk_register_gate(NULL, "pcm_bus", + "sclk_pcm", CLK_SET_RATE_PARENT, + reg_base + ASS_CLK_GATE, 4, 0, &lock); + + clk_table[EXYNOS_SCLK_PCM] = clk_register_gate(NULL, "sclk_pcm", + "div_pcm0", CLK_SET_RATE_PARENT, + reg_base + ASS_CLK_GATE, 5, 0, &lock); + +#ifdef CONFIG_PM_SLEEP + register_syscore_ops(&exynos_audss_clk_syscore_ops); +#endif + + pr_info("Exynos: Audss: clock setup completed\n"); +} +CLK_OF_DECLARE(exynos4210_audss_clk, "samsung,exynos4210-audss-clock", + exynos_audss_clk_init); +CLK_OF_DECLARE(exynos5250_audss_clk, "samsung,exynos5250-audss-clock", + exynos_audss_clk_init); diff --git a/include/dt-bindings/clk/exynos-audss-clk.h b/include/dt-bindings/clk/exynos-audss-clk.h new file mode 100644 index 000000000000..8279f427c60f --- /dev/null +++ b/include/dt-bindings/clk/exynos-audss-clk.h @@ -0,0 +1,25 @@ +/* + * This header provides constants for Samsung audio subsystem + * clock controller. + * + * The constants defined in this header are being used in dts + * and exynos audss driver. + */ + +#ifndef _DT_BINDINGS_CLK_EXYNOS_AUDSS_H +#define _DT_BINDINGS_CLK_EXYNOS_AUDSS_H + +#define EXYNOS_MOUT_AUDSS 0 +#define EXYNOS_MOUT_I2S 1 +#define EXYNOS_DOUT_SRP 2 +#define EXYNOS_DOUT_AUD_BUS 3 +#define EXYNOS_DOUT_I2S 4 +#define EXYNOS_SRP_CLK 5 +#define EXYNOS_I2S_BUS 6 +#define EXYNOS_SCLK_I2S 7 +#define EXYNOS_PCM_BUS 8 +#define EXYNOS_SCLK_PCM 9 + +#define EXYNOS_AUDSS_MAX_CLKS 10 + +#endif -- cgit v1.2.3 From bba23d954fb806a2f806d12ad1af56b4e00a07ca Mon Sep 17 00:00:00 2001 From: Padmavathi Venna Date: Tue, 18 Jun 2013 00:02:21 +0900 Subject: ARM: dts: add Exynos audio subsystem clock controller node Audio subsystem introduced in s5pv210 and exynos platforms which has a internal clock controller. This patch adds a node for the same on exynos5250. Signed-off-by: Padmavathi Venna Reviewed-by: Sylwester Nawrocki Reviewed-by: Doug Anderson Signed-off-by: Kukjin Kim --- arch/arm/boot/dts/exynos5250.dtsi | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi index 5cfc5b78d951..84edf42fd685 100644 --- a/arch/arm/boot/dts/exynos5250.dtsi +++ b/arch/arm/boot/dts/exynos5250.dtsi @@ -72,6 +72,12 @@ #clock-cells = <1>; }; + clock_audss: audss-clock-controller@3810000 { + compatible = "samsung,exynos5250-audss-clock"; + reg = <0x03810000 0x0C>; + #clock-cells = <1>; + }; + gic:interrupt-controller@10481000 { compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic"; #interrupt-cells = <3>; -- cgit v1.2.3 From 916ec47ed8812abf7955998c866f9f4e6ad425f9 Mon Sep 17 00:00:00 2001 From: Padmavathi Venna Date: Tue, 18 Jun 2013 00:02:26 +0900 Subject: ARM: dts: add clock provider information for i2s controllers in Exynos5250 Add clock lookup information for i2s controllers on exynos5250 SoC. Signed-off-by: Padmavathi Venna Reviewed-by: Sylwester Nawrocki Signed-off-by: Kukjin Kim --- arch/arm/boot/dts/exynos5250.dtsi | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi index 84edf42fd685..0aa9091ed7c5 100644 --- a/arch/arm/boot/dts/exynos5250.dtsi +++ b/arch/arm/boot/dts/exynos5250.dtsi @@ -20,6 +20,8 @@ #include "skeleton.dtsi" #include "exynos5250-pinctrl.dtsi" +#include + / { compatible = "samsung,exynos5250"; interrupt-parent = <&gic>; @@ -457,6 +459,10 @@ &pdma0 9 &pdma0 8>; dma-names = "tx", "rx", "tx-sec"; + clocks = <&clock_audss EXYNOS_I2S_BUS>, + <&clock_audss EXYNOS_I2S_BUS>, + <&clock_audss EXYNOS_SCLK_I2S>; + clock-names = "iis", "i2s_opclk0", "i2s_opclk1"; samsung,supports-6ch; samsung,supports-rstclr; samsung,supports-secdai; @@ -471,6 +477,8 @@ dmas = <&pdma1 12 &pdma1 11>; dma-names = "tx", "rx"; + clocks = <&clock 307>, <&clock 157>; + clock-names = "iis", "i2s_opclk0"; pinctrl-names = "default"; pinctrl-0 = <&i2s1_bus>; }; @@ -481,6 +489,8 @@ dmas = <&pdma0 12 &pdma0 11>; dma-names = "tx", "rx"; + clocks = <&clock 308>, <&clock 158>; + clock-names = "iis", "i2s_opclk0"; pinctrl-names = "default"; pinctrl-0 = <&i2s2_bus>; }; -- cgit v1.2.3 From 4a3afb73cdeaec0b4d4b39b6af0968cfa804b662 Mon Sep 17 00:00:00 2001 From: Padmavathi Venna Date: Tue, 18 Jun 2013 00:02:31 +0900 Subject: ARM: dts: Update Samsung I2S documentation This patch updates the samsung i2s documentation for pinmux and clock entries. Signed-off-by: Padmavathi Venna Signed-off-by: Kukjin Kim --- .../devicetree/bindings/sound/samsung-i2s.txt | 46 +++++++++------------- 1 file changed, 19 insertions(+), 27 deletions(-) diff --git a/Documentation/devicetree/bindings/sound/samsung-i2s.txt b/Documentation/devicetree/bindings/sound/samsung-i2s.txt index 3070046da2e5..025e66b85a43 100644 --- a/Documentation/devicetree/bindings/sound/samsung-i2s.txt +++ b/Documentation/devicetree/bindings/sound/samsung-i2s.txt @@ -8,6 +8,16 @@ Required SoC Specific Properties: - dmas: list of DMA controller phandle and DMA request line ordered pairs. - dma-names: identifier string for each DMA request line in the dmas property. These strings correspond 1:1 with the ordered pairs in dmas. +- clocks: Handle to iis clock and RCLK source clk. +- clock-names: + i2s0 uses some base clks from CMU and some are from audio subsystem internal + clock controller. The clock names for i2s0 should be "iis", "i2s_opclk0" and + "i2s_opclk1" as shown in the example below. + i2s1 and i2s2 uses clocks from CMU. The clock names for i2s1 and i2s2 should + be "iis" and "i2s_opclk0". + "iis" is the i2s bus clock and i2s_opclk0, i2s_opclk1 are sources of the root + clk. i2s0 has internal mux to select the source of root clk and i2s1 and i2s2 + doesn't have any such mux. Optional SoC Specific Properties: @@ -20,44 +30,26 @@ Optional SoC Specific Properties: then this flag is enabled. - samsung,idma-addr: Internal DMA register base address of the audio sub system(used in secondary sound source). - -Required Board Specific Properties: - -- gpios: The gpio specifier for data out,data in, LRCLK, CDCLK and SCLK - interface lines. The format of the gpio specifier depends on the gpio - controller. - The syntax of samsung gpio specifier is - <[phandle of the gpio controller node] - [pin number within the gpio controller] - [mux function] - [flags and pull up/down] - [drive strength]> +- pinctrl-0: Should specify pin control groups used for this controller. +- pinctrl-names: Should contain only one value - "default". Example: -- SoC Specific Portion: - -i2s@03830000 { +i2s0: i2s@03830000 { compatible = "samsung,i2s-v5"; reg = <0x03830000 0x100>; dmas = <&pdma0 10 &pdma0 9 &pdma0 8>; dma-names = "tx", "rx", "tx-sec"; + clocks = <&clock_audss EXYNOS_I2S_BUS>, + <&clock_audss EXYNOS_I2S_BUS>, + <&clock_audss EXYNOS_SCLK_I2S>; + clock-names = "iis", "i2s_opclk0", "i2s_opclk1"; samsung,supports-6ch; samsung,supports-rstclr; samsung,supports-secdai; samsung,idma-addr = <0x03000000>; -}; - -- Board Specific Portion: - -i2s@03830000 { - gpios = <&gpz 0 2 0 0>, /* I2S_0_SCLK */ - <&gpz 1 2 0 0>, /* I2S_0_CDCLK */ - <&gpz 2 2 0 0>, /* I2S_0_LRCK */ - <&gpz 3 2 0 0>, /* I2S_0_SDI */ - <&gpz 4 2 0 0>, /* I2S_0_SDO[1] */ - <&gpz 5 2 0 0>, /* I2S_0_SDO[2] */ - <&gpz 6 2 0 0>; /* I2S_0_SDO[3] */ + pinctrl-names = "default"; + pinctrl-0 = <&i2s0_bus>; }; -- cgit v1.2.3 From 79d743c177f99d6854e152d9e7fac5bbbeb7c25e Mon Sep 17 00:00:00 2001 From: Padmavathi Venna Date: Tue, 18 Jun 2013 00:02:36 +0900 Subject: clk: exynos5250: Add enum entries for divider clock of i2s1 and i2s2 This patch adds enum entries for div_i2s1 and div_i2s2 which are required for i2s1 and i2s2 controllers. Signed-off-by: Padmavathi Venna Acked-by: Mike Turquette Signed-off-by: Kukjin Kim --- drivers/clk/samsung/clk-exynos5250.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/clk/samsung/clk-exynos5250.c b/drivers/clk/samsung/clk-exynos5250.c index 5c97e75924a8..7c6885058cef 100644 --- a/drivers/clk/samsung/clk-exynos5250.c +++ b/drivers/clk/samsung/clk-exynos5250.c @@ -87,6 +87,7 @@ enum exynos5250_clks { sclk_mmc0, sclk_mmc1, sclk_mmc2, sclk_mmc3, sclk_sata, sclk_usb3, sclk_jpeg, sclk_uart0, sclk_uart1, sclk_uart2, sclk_uart3, sclk_pwm, sclk_audio1, sclk_audio2, sclk_spdif, sclk_spi0, sclk_spi1, sclk_spi2, + div_i2s1, div_i2s2, /* gate clocks */ gscl0 = 256, gscl1, gscl2, gscl3, gscl_wa, gscl_wb, smmu_gscl0, @@ -291,8 +292,8 @@ struct samsung_div_clock exynos5250_div_clks[] __initdata = { DIV(none, "div_pcm1", "sclk_audio1", DIV_PERIC4, 4, 8), DIV(none, "div_audio2", "mout_audio2", DIV_PERIC4, 16, 4), DIV(none, "div_pcm2", "sclk_audio2", DIV_PERIC4, 20, 8), - DIV(none, "div_i2s1", "sclk_audio1", DIV_PERIC5, 0, 6), - DIV(none, "div_i2s2", "sclk_audio2", DIV_PERIC5, 8, 6), + DIV(div_i2s1, "div_i2s1", "sclk_audio1", DIV_PERIC5, 0, 6), + DIV(div_i2s2, "div_i2s2", "sclk_audio2", DIV_PERIC5, 8, 6), DIV(sclk_pixel, "div_hdmi_pixel", "sclk_vpll", DIV_DISP1_0, 28, 4), DIV_A(none, "armclk", "div_arm", DIV_CPU0, 28, 3, "armclk"), DIV_F(none, "div_mipi1_pre", "div_mipi1", -- cgit v1.2.3 From b559c3e8e7ca469921987925baf892ab2038396e Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Tue, 18 Jun 2013 12:29:48 +0200 Subject: gpio-rcar: Reference core gpio documentation in the DT bindings Replaced the detailed gpio-ranges documentation with a reference to the code gpio DT bindings, and mention the gpio flags symbolic names. Signed-off-by: Laurent Pinchart Signed-off-by: Simon Horman --- .../devicetree/bindings/gpio/renesas,gpio-rcar.txt | 18 ++++++------------ 1 file changed, 6 insertions(+), 12 deletions(-) diff --git a/Documentation/devicetree/bindings/gpio/renesas,gpio-rcar.txt b/Documentation/devicetree/bindings/gpio/renesas,gpio-rcar.txt index 46d76a004246..cb3dc7bcd8e6 100644 --- a/Documentation/devicetree/bindings/gpio/renesas,gpio-rcar.txt +++ b/Documentation/devicetree/bindings/gpio/renesas,gpio-rcar.txt @@ -16,18 +16,12 @@ Required Properties: - gpio-controller: Marks the device node as a gpio controller. - #gpio-cells: Should be 2. The first cell is the GPIO number and the second - cell is used to specify optional parameters as bit flags. Only the GPIO - active low flag (bit 0) is currently supported. - - gpio-ranges: Range of pins managed by the GPIO controller as a 4-cells - tuple using the following syntax. - - <[phandle of the pin controller node] - 0 - [index of the first pin] - [number of pins]> - -Please refer to gpio.txt in this directory for details of the common GPIO -bindings used by client devices. + cell specifies GPIO flags, as defined in . Only the + GPIO_ACTIVE_HIGH and GPIO_ACTIVE_LOW flags are supported. + - gpio-ranges: Range of pins managed by the GPIO controller. + +Please refer to gpio.txt in this directory for details of gpio-ranges property +and the common GPIO bindings used by client devices. Example: R8A7779 (R-Car H1) GPIO controller nodes -- cgit v1.2.3 From e305062e94719ef543ae936dd56501b5a36406c6 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Tue, 18 Jun 2013 12:29:49 +0200 Subject: gpio-rcar: Remove #ifdef CONFIG_OF around OF-specific sections All functions and data types used by OF-specific code paths are declared in regardless of CONFIG_OF. Replace the #ifdef CONFIG_OF guard with a if(IS_ENABLED(CONFIG_OF)) and let the compiler optimize the unused code away. Signed-off-by: Laurent Pinchart Signed-off-by: Simon Horman --- drivers/gpio/gpio-rcar.c | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-) diff --git a/drivers/gpio/gpio-rcar.c b/drivers/gpio/gpio-rcar.c index 5a693dd0ac7a..7fd09efd708f 100644 --- a/drivers/gpio/gpio-rcar.c +++ b/drivers/gpio/gpio-rcar.c @@ -279,16 +279,13 @@ static struct irq_domain_ops gpio_rcar_irq_domain_ops = { static void gpio_rcar_parse_pdata(struct gpio_rcar_priv *p) { struct gpio_rcar_config *pdata = p->pdev->dev.platform_data; -#ifdef CONFIG_OF struct device_node *np = p->pdev->dev.of_node; struct of_phandle_args args; int ret; -#endif - if (pdata) + if (pdata) { p->config = *pdata; -#ifdef CONFIG_OF - else if (np) { + } else if (IS_ENABLED(CONFIG_OF) && np) { ret = of_parse_phandle_with_args(np, "gpio-ranges", "#gpio-range-cells", 0, &args); p->config.number_of_pins = ret == 0 && args.args_count == 3 @@ -296,7 +293,6 @@ static void gpio_rcar_parse_pdata(struct gpio_rcar_priv *p) : RCAR_MAX_GPIO_PER_BANK; p->config.gpio_base = -1; } -#endif if (p->config.number_of_pins == 0 || p->config.number_of_pins > RCAR_MAX_GPIO_PER_BANK) { -- cgit v1.2.3 From 30d2266c685ce9f560e5023e4add58f890554a46 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Mon, 17 Jun 2013 09:55:50 +0200 Subject: gpio: rcar: fix gpio_rcar_of_table The device table needs to be terminated with an empty element. Signed-off-by: Arnd Bergmann Cc: Laurent Pinchart Cc: Simon Horman --- drivers/gpio/gpio-rcar.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpio/gpio-rcar.c b/drivers/gpio/gpio-rcar.c index 5a693dd0ac7a..f3327533bfd5 100644 --- a/drivers/gpio/gpio-rcar.c +++ b/drivers/gpio/gpio-rcar.c @@ -437,6 +437,7 @@ static const struct of_device_id gpio_rcar_of_table[] = { { .compatible = "renesas,gpio-rcar", }, + { }, }; MODULE_DEVICE_TABLE(of, gpio_rcar_of_table); -- cgit v1.2.3 From 348f3bc6e92e95aa153e9dc413755aaee892b139 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Tue, 18 Jun 2013 09:51:57 +0100 Subject: ARM: ux500: Provide a AB8500 GPIO Device Tree node Here we're adding a node for the AB8500 GPIO device. This will allow other DT:ed components to obtain GPIOs for use within their drivers. Signed-off-by: Lee Jones Signed-off-by: Arnd Bergmann Acked-by: Linus Walleij --- arch/arm/boot/dts/dbx5x0.dtsi | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/arch/arm/boot/dts/dbx5x0.dtsi b/arch/arm/boot/dts/dbx5x0.dtsi index b6bc4ff17f26..544824b512e1 100644 --- a/arch/arm/boot/dts/dbx5x0.dtsi +++ b/arch/arm/boot/dts/dbx5x0.dtsi @@ -326,6 +326,11 @@ interrupt-controller; #interrupt-cells = <2>; + ab8500_gpio: ab8500-gpio { + gpio-controller; + #gpio-cells = <2>; + }; + ab8500-rtc { compatible = "stericsson,ab8500-rtc"; interrupts = <17 0x4 -- cgit v1.2.3 From b099576de9d7352a1f4b7650eef562f3d4d29198 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Tue, 18 Jun 2013 09:51:58 +0100 Subject: ARM: ux500: Correct the EN_3v3 regulator's on/off GPIO When this node was added, the AB8500 GPIO driver was pretty broken. As a hack, we pretended that NOMADIK GPIO 26 was the correct on/off pin, as it was unused. It worked because AB8500 GPIO 26 was in an 'always on from boot' state. Now the AB8500 GPIO driver is working, the default state for all the pins is 'off'. Let's flip back over to use the correct GPIO which is _actually_ attached to the regulator. We're also taking the opportunity to straighten out some formatting misdemeanours, swapping spaces for tabs. Signed-off-by: Lee Jones Signed-off-by: Arnd Bergmann Acked-by: Linus Walleij --- arch/arm/boot/dts/snowball.dts | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) diff --git a/arch/arm/boot/dts/snowball.dts b/arch/arm/boot/dts/snowball.dts index db5db24fd544..da3f02a7d84b 100644 --- a/arch/arm/boot/dts/snowball.dts +++ b/arch/arm/boot/dts/snowball.dts @@ -22,12 +22,13 @@ en_3v3_reg: en_3v3 { compatible = "regulator-fixed"; - regulator-name = "en-3v3-fixed-supply"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpios = <&gpio0 26 0x4>; // 26 - startup-delay-us = <5000>; - enable-active-high; + regulator-name = "en-3v3-fixed-supply"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + /* AB8500 GPIOs start from 1 - offset 25 is GPIO26. */ + gpio = <&ab8500_gpio 25 0x4>; + startup-delay-us = <5000>; + enable-active-high; }; gpio_keys { -- cgit v1.2.3 From b6f5f4a5930855175dff7f783c0595bcdfb08280 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Tue, 18 Jun 2013 09:51:59 +0100 Subject: ARM: ux500: Remove mop500_snowball_ethernet_clock_enable() mop500_snowball_ethernet_clock_enable() provided a means to enable a clock which was used for the SMSC911x Ethernet device on Snowball. It was merely a stand-in until the driver was common clk compliant. Now that it is, this can be removed for both DT and ATAGs booting. Signed-off-by: Lee Jones Signed-off-by: Arnd Bergmann Acked-by: Linus Walleij --- arch/arm/mach-ux500/board-mop500.c | 11 ----------- arch/arm/mach-ux500/board-mop500.h | 1 - arch/arm/mach-ux500/cpu-db8500.c | 1 - 3 files changed, 13 deletions(-) diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c index 78389de94dde..70a8057f3acf 100644 --- a/arch/arm/mach-ux500/board-mop500.c +++ b/arch/arm/mach-ux500/board-mop500.c @@ -413,15 +413,6 @@ static void mop500_prox_deactivate(struct device *dev) regulator_put(prox_regulator); } -void mop500_snowball_ethernet_clock_enable(void) -{ - struct clk *clk; - - clk = clk_get_sys("fsmc", NULL); - if (!IS_ERR(clk)) - clk_prepare_enable(clk); -} - static struct cryp_platform_data u8500_cryp1_platform_data = { .mem_to_engine = { .dir = STEDMA40_MEM_TO_PERIPH, @@ -674,8 +665,6 @@ static void __init snowball_init_machine(void) mop500_audio_init(parent); mop500_uart_init(parent); - mop500_snowball_ethernet_clock_enable(); - /* This board has full regulator constraints */ regulator_has_full_constraints(); } diff --git a/arch/arm/mach-ux500/board-mop500.h b/arch/arm/mach-ux500/board-mop500.h index 49514b825034..16bf1ac020a8 100644 --- a/arch/arm/mach-ux500/board-mop500.h +++ b/arch/arm/mach-ux500/board-mop500.h @@ -104,7 +104,6 @@ void __init mop500_pinmaps_init(void); void __init snowball_pinmaps_init(void); void __init hrefv60_pinmaps_init(void); void mop500_audio_init(struct device *parent); -void mop500_snowball_ethernet_clock_enable(void); int __init mop500_uib_init(void); void mop500_uib_i2c_add(int busnum, struct i2c_board_info *info, diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c index 46cca52890bc..17a487177dab 100644 --- a/arch/arm/mach-ux500/cpu-db8500.c +++ b/arch/arm/mach-ux500/cpu-db8500.c @@ -309,7 +309,6 @@ static void __init u8500_init_machine(void) mop500_pinmaps_init(); else if (of_machine_is_compatible("calaosystems,snowball-a9500")) { snowball_pinmaps_init(); - mop500_snowball_ethernet_clock_enable(); } else if (of_machine_is_compatible("st-ericsson,hrefv60+")) hrefv60_pinmaps_init(); else if (of_machine_is_compatible("st-ericsson,ccu9540")) {} -- cgit v1.2.3 From b4a1ccdf27d140394250ddeeb274deeddc9a9b2e Mon Sep 17 00:00:00 2001 From: Fabio Baltieri Date: Thu, 20 Jun 2013 11:17:39 +0200 Subject: dmaengine: ste_dma40: Declare memcpy config as static Fix sparse warnings: drivers/dma/ste_dma40.c:81:26: warning: symbol 'dma40_memcpy_conf_phy' was not declared. Should it be static? drivers/dma/ste_dma40.c:95:26: warning: symbol 'dma40_memcpy_conf_log' was not declared. Should it be static? Signed-off-by: Fabio Baltieri Acked-by: Vinod Koul Signed-off-by: Linus Walleij --- drivers/dma/ste_dma40.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/dma/ste_dma40.c b/drivers/dma/ste_dma40.c index 842e2ed04659..9f8ba7c5c01b 100644 --- a/drivers/dma/ste_dma40.c +++ b/drivers/dma/ste_dma40.c @@ -78,7 +78,7 @@ static int dma40_memcpy_channels[] = { }; /* Default configuration for physcial memcpy */ -struct stedma40_chan_cfg dma40_memcpy_conf_phy = { +static struct stedma40_chan_cfg dma40_memcpy_conf_phy = { .mode = STEDMA40_MODE_PHYSICAL, .dir = DMA_MEM_TO_MEM, @@ -92,7 +92,7 @@ struct stedma40_chan_cfg dma40_memcpy_conf_phy = { }; /* Default configuration for logical memcpy */ -struct stedma40_chan_cfg dma40_memcpy_conf_log = { +static struct stedma40_chan_cfg dma40_memcpy_conf_log = { .mode = STEDMA40_MODE_LOGICAL, .dir = DMA_MEM_TO_MEM, -- cgit v1.2.3 From e3f511479376f073085b3a974343290cec350279 Mon Sep 17 00:00:00 2001 From: Fabio Baltieri Date: Tue, 25 Jun 2013 10:54:44 +0200 Subject: crypto: ux500/hash: use readl on iomem addresses Always use readl when reading memory mapped registers. Signed-off-by: Fabio Baltieri Acked-by: Herbert Xu Signed-off-by: Linus Walleij --- drivers/crypto/ux500/hash/hash_core.c | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) diff --git a/drivers/crypto/ux500/hash/hash_core.c b/drivers/crypto/ux500/hash/hash_core.c index 9ca6fbb5e30d..23bda940abd7 100644 --- a/drivers/crypto/ux500/hash/hash_core.c +++ b/drivers/crypto/ux500/hash/hash_core.c @@ -473,12 +473,12 @@ static void hash_hw_write_key(struct hash_device_data *device_data, HASH_SET_DIN(&word, nwords); } - while (device_data->base->str & HASH_STR_DCAL_MASK) + while (readl(&device_data->base->str) & HASH_STR_DCAL_MASK) cpu_relax(); HASH_SET_DCAL; - while (device_data->base->str & HASH_STR_DCAL_MASK) + while (readl(&device_data->base->str) & HASH_STR_DCAL_MASK) cpu_relax(); } @@ -661,7 +661,7 @@ static void hash_messagepad(struct hash_device_data *device_data, if (index_bytes) HASH_SET_DIN(message, nwords); - while (device_data->base->str & HASH_STR_DCAL_MASK) + while (readl(&device_data->base->str) & HASH_STR_DCAL_MASK) cpu_relax(); /* num_of_bytes == 0 => NBLW <- 0 (32 bits valid in DATAIN) */ @@ -676,7 +676,7 @@ static void hash_messagepad(struct hash_device_data *device_data, (int)(readl_relaxed(&device_data->base->str) & HASH_STR_NBLW_MASK)); - while (device_data->base->str & HASH_STR_DCAL_MASK) + while (readl(&device_data->base->str) & HASH_STR_DCAL_MASK) cpu_relax(); } @@ -776,7 +776,7 @@ void hash_begin(struct hash_device_data *device_data, struct hash_ctx *ctx) /* HW and SW initializations */ /* Note: there is no need to initialize buffer and digest members */ - while (device_data->base->str & HASH_STR_DCAL_MASK) + while (readl(&device_data->base->str) & HASH_STR_DCAL_MASK) cpu_relax(); /* @@ -962,7 +962,7 @@ static int hash_dma_final(struct ahash_request *req) wait_for_completion(&ctx->device->dma.complete); hash_dma_done(ctx); - while (device_data->base->str & HASH_STR_DCAL_MASK) + while (readl(&device_data->base->str) & HASH_STR_DCAL_MASK) cpu_relax(); if (ctx->config.oper_mode == HASH_OPER_MODE_HMAC && ctx->key) { @@ -1060,7 +1060,7 @@ int hash_hw_final(struct ahash_request *req) req_ctx->state.index); } else { HASH_SET_DCAL; - while (device_data->base->str & HASH_STR_DCAL_MASK) + while (readl(&device_data->base->str) & HASH_STR_DCAL_MASK) cpu_relax(); } @@ -1189,7 +1189,7 @@ int hash_resume_state(struct hash_device_data *device_data, temp_cr = device_state->temp_cr; writel_relaxed(temp_cr & HASH_CR_RESUME_MASK, &device_data->base->cr); - if (device_data->base->cr & HASH_CR_MODE_MASK) + if (readl(&device_data->base->cr) & HASH_CR_MODE_MASK) hash_mode = HASH_OPER_MODE_HMAC; else hash_mode = HASH_OPER_MODE_HASH; @@ -1233,7 +1233,7 @@ int hash_save_state(struct hash_device_data *device_data, * actually makes sure that there isn't any ongoing calculation in the * hardware. */ - while (device_data->base->str & HASH_STR_DCAL_MASK) + while (readl(&device_data->base->str) & HASH_STR_DCAL_MASK) cpu_relax(); temp_cr = readl_relaxed(&device_data->base->cr); @@ -1242,7 +1242,7 @@ int hash_save_state(struct hash_device_data *device_data, device_state->din_reg = readl_relaxed(&device_data->base->din); - if (device_data->base->cr & HASH_CR_MODE_MASK) + if (readl(&device_data->base->cr) & HASH_CR_MODE_MASK) hash_mode = HASH_OPER_MODE_HMAC; else hash_mode = HASH_OPER_MODE_HASH; -- cgit v1.2.3 From 756bed2d0e55ab3b063447d150436bbc1de1301b Mon Sep 17 00:00:00 2001 From: Fabio Baltieri Date: Tue, 25 Jun 2013 10:54:45 +0200 Subject: crypto: ux500/hash: add missing static qualifiers Add missing static qualifiers to hash_process_data and hash_hw_final. Signed-off-by: Fabio Baltieri Acked-by: Herbert Xu Signed-off-by: Linus Walleij --- drivers/crypto/ux500/hash/hash_core.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/crypto/ux500/hash/hash_core.c b/drivers/crypto/ux500/hash/hash_core.c index 23bda940abd7..cffe26ea716f 100644 --- a/drivers/crypto/ux500/hash/hash_core.c +++ b/drivers/crypto/ux500/hash/hash_core.c @@ -792,8 +792,7 @@ void hash_begin(struct hash_device_data *device_data, struct hash_ctx *ctx) HASH_CLEAR_BITS(&device_data->base->str, HASH_STR_NBLW_MASK); } -int hash_process_data( - struct hash_device_data *device_data, +static int hash_process_data(struct hash_device_data *device_data, struct hash_ctx *ctx, struct hash_req_ctx *req_ctx, int msg_length, u8 *data_buffer, u8 *buffer, u8 *index) { @@ -992,7 +991,7 @@ out: * hash_hw_final - The final hash calculation function * @req: The hash request for the job. */ -int hash_hw_final(struct ahash_request *req) +static int hash_hw_final(struct ahash_request *req) { int ret = 0; struct crypto_ahash *tfm = crypto_ahash_reqtfm(req); -- cgit v1.2.3 From fe14ed43ee7d1aec9778388a7a07ab7bfb499736 Mon Sep 17 00:00:00 2001 From: Fabio Baltieri Date: Tue, 25 Jun 2013 10:54:46 +0200 Subject: crypto: ux500/crypt: add missing __iomem qualifiers Add missing __iomem to struct cryp_register pointers, this solve some "incorrect type in initializer (different address spaces)" sparse warnings. Signed-off-by: Fabio Baltieri Acked-by: Herbert Xu Signed-off-by: Linus Walleij --- drivers/crypto/ux500/cryp/cryp.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/crypto/ux500/cryp/cryp.c b/drivers/crypto/ux500/cryp/cryp.c index 3eafa903ebcd..43a0c8a26ab0 100644 --- a/drivers/crypto/ux500/cryp/cryp.c +++ b/drivers/crypto/ux500/cryp/cryp.c @@ -291,7 +291,7 @@ void cryp_save_device_context(struct cryp_device_data *device_data, int cryp_mode) { enum cryp_algo_mode algomode; - struct cryp_register *src_reg = device_data->base; + struct cryp_register __iomem *src_reg = device_data->base; struct cryp_config *config = (struct cryp_config *)device_data->current_ctx; @@ -349,7 +349,7 @@ void cryp_save_device_context(struct cryp_device_data *device_data, void cryp_restore_device_context(struct cryp_device_data *device_data, struct cryp_device_context *ctx) { - struct cryp_register *reg = device_data->base; + struct cryp_register __iomem *reg = device_data->base; struct cryp_config *config = (struct cryp_config *)device_data->current_ctx; -- cgit v1.2.3 From 97453dfbbb5c26211998ed2639a45750ea5cc543 Mon Sep 17 00:00:00 2001 From: Fabio Baltieri Date: Tue, 25 Jun 2013 10:54:47 +0200 Subject: crypto: ux500: use dmaengine_device_control API Use dmaengine_device_control inline function instead of going through the structures manually. Signed-off-by: Fabio Baltieri Acked-by: Herbert Xu Signed-off-by: Linus Walleij --- drivers/crypto/ux500/cryp/cryp_core.c | 4 ++-- drivers/crypto/ux500/hash/hash_core.c | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/crypto/ux500/cryp/cryp_core.c b/drivers/crypto/ux500/cryp/cryp_core.c index 4f8b11af29a6..8e9dc05705a9 100644 --- a/drivers/crypto/ux500/cryp/cryp_core.c +++ b/drivers/crypto/ux500/cryp/cryp_core.c @@ -607,12 +607,12 @@ static void cryp_dma_done(struct cryp_ctx *ctx) dev_dbg(ctx->device->dev, "[%s]: ", __func__); chan = ctx->device->dma.chan_mem2cryp; - chan->device->device_control(chan, DMA_TERMINATE_ALL, 0); + dmaengine_device_control(chan, DMA_TERMINATE_ALL, 0); dma_unmap_sg(chan->device->dev, ctx->device->dma.sg_src, ctx->device->dma.sg_src_len, DMA_TO_DEVICE); chan = ctx->device->dma.chan_cryp2mem; - chan->device->device_control(chan, DMA_TERMINATE_ALL, 0); + dmaengine_device_control(chan, DMA_TERMINATE_ALL, 0); dma_unmap_sg(chan->device->dev, ctx->device->dma.sg_dst, ctx->device->dma.sg_dst_len, DMA_FROM_DEVICE); } diff --git a/drivers/crypto/ux500/hash/hash_core.c b/drivers/crypto/ux500/hash/hash_core.c index cffe26ea716f..58d6fcfe2d0f 100644 --- a/drivers/crypto/ux500/hash/hash_core.c +++ b/drivers/crypto/ux500/hash/hash_core.c @@ -203,7 +203,7 @@ static void hash_dma_done(struct hash_ctx *ctx) struct dma_chan *chan; chan = ctx->device->dma.chan_mem2hash; - chan->device->device_control(chan, DMA_TERMINATE_ALL, 0); + dmaengine_device_control(chan, DMA_TERMINATE_ALL, 0); dma_unmap_sg(chan->device->dev, ctx->device->dma.sg, ctx->device->dma.sg_len, DMA_TO_DEVICE); -- cgit v1.2.3 From 7e933d3b1e25b250b58b827ef455a1b489c84157 Mon Sep 17 00:00:00 2001 From: Fabio Baltieri Date: Tue, 25 Jun 2013 10:54:48 +0200 Subject: crypto: ux500: use dmaengine_prep_slave_sg API Use dmaengine_prep_slave_sg inline function instead of going through the structures manually. Signed-off-by: Fabio Baltieri Acked-by: Herbert Xu Signed-off-by: Linus Walleij --- drivers/crypto/ux500/cryp/cryp_core.c | 20 ++++++++++---------- drivers/crypto/ux500/hash/hash_core.c | 4 ++-- 2 files changed, 12 insertions(+), 12 deletions(-) diff --git a/drivers/crypto/ux500/cryp/cryp_core.c b/drivers/crypto/ux500/cryp/cryp_core.c index 8e9dc05705a9..19a3a60706fc 100644 --- a/drivers/crypto/ux500/cryp/cryp_core.c +++ b/drivers/crypto/ux500/cryp/cryp_core.c @@ -553,10 +553,10 @@ static int cryp_set_dma_transfer(struct cryp_ctx *ctx, dev_dbg(ctx->device->dev, "[%s]: Setting up DMA for buffer " "(TO_DEVICE)", __func__); - desc = channel->device->device_prep_slave_sg(channel, - ctx->device->dma.sg_src, - ctx->device->dma.sg_src_len, - direction, DMA_CTRL_ACK, NULL); + desc = dmaengine_prep_slave_sg(channel, + ctx->device->dma.sg_src, + ctx->device->dma.sg_src_len, + direction, DMA_CTRL_ACK); break; case DMA_FROM_DEVICE: @@ -577,12 +577,12 @@ static int cryp_set_dma_transfer(struct cryp_ctx *ctx, dev_dbg(ctx->device->dev, "[%s]: Setting up DMA for buffer " "(FROM_DEVICE)", __func__); - desc = channel->device->device_prep_slave_sg(channel, - ctx->device->dma.sg_dst, - ctx->device->dma.sg_dst_len, - direction, - DMA_CTRL_ACK | - DMA_PREP_INTERRUPT, NULL); + desc = dmaengine_prep_slave_sg(channel, + ctx->device->dma.sg_dst, + ctx->device->dma.sg_dst_len, + direction, + DMA_CTRL_ACK | + DMA_PREP_INTERRUPT); desc->callback = cryp_dma_out_callback; desc->callback_param = ctx; diff --git a/drivers/crypto/ux500/hash/hash_core.c b/drivers/crypto/ux500/hash/hash_core.c index 58d6fcfe2d0f..ba2ed2110664 100644 --- a/drivers/crypto/ux500/hash/hash_core.c +++ b/drivers/crypto/ux500/hash/hash_core.c @@ -180,9 +180,9 @@ static int hash_set_dma_transfer(struct hash_ctx *ctx, struct scatterlist *sg, dev_dbg(ctx->device->dev, "[%s]: Setting up DMA for buffer " "(TO_DEVICE)", __func__); - desc = channel->device->device_prep_slave_sg(channel, + desc = dmaengine_prep_slave_sg(channel, ctx->device->dma.sg, ctx->device->dma.sg_len, - direction, DMA_CTRL_ACK | DMA_PREP_INTERRUPT, NULL); + direction, DMA_CTRL_ACK | DMA_PREP_INTERRUPT); if (!desc) { dev_err(ctx->device->dev, "[%s]: device_prep_slave_sg() failed!", __func__); -- cgit v1.2.3 From 06568483297739f6ce8f2d25983f88dd8b563a9d Mon Sep 17 00:00:00 2001 From: Fabio Baltieri Date: Tue, 25 Jun 2013 10:54:49 +0200 Subject: crypto: ux500: use dmaengine_submit API Use dmaengine_submit instead of calling desc->tx_submit manually. Signed-off-by: Fabio Baltieri Acked-by: Herbert Xu Signed-off-by: Linus Walleij --- drivers/crypto/ux500/cryp/cryp_core.c | 2 +- drivers/crypto/ux500/hash/hash_core.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/crypto/ux500/cryp/cryp_core.c b/drivers/crypto/ux500/cryp/cryp_core.c index 19a3a60706fc..0257f6b32642 100644 --- a/drivers/crypto/ux500/cryp/cryp_core.c +++ b/drivers/crypto/ux500/cryp/cryp_core.c @@ -594,7 +594,7 @@ static int cryp_set_dma_transfer(struct cryp_ctx *ctx, return -EFAULT; } - cookie = desc->tx_submit(desc); + cookie = dmaengine_submit(desc); dma_async_issue_pending(channel); return 0; diff --git a/drivers/crypto/ux500/hash/hash_core.c b/drivers/crypto/ux500/hash/hash_core.c index ba2ed2110664..95490f14ddb8 100644 --- a/drivers/crypto/ux500/hash/hash_core.c +++ b/drivers/crypto/ux500/hash/hash_core.c @@ -192,7 +192,7 @@ static int hash_set_dma_transfer(struct hash_ctx *ctx, struct scatterlist *sg, desc->callback = hash_dma_callback; desc->callback_param = ctx; - cookie = desc->tx_submit(desc); + cookie = dmaengine_submit(desc); dma_async_issue_pending(channel); return 0; -- cgit v1.2.3