From 4d1827485acecac0016eaaec199e97697afdaa84 Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Mon, 31 Jul 2023 14:02:11 +0800 Subject: tools/power/turbostat: Fix failure with new uncore sysfs On some platforms, turbostat fails during launch time like below, turbostat version 2023.03.17 - Len Brown ... cpu40: MSR_IA32_PACKAGE_THERM_STATUS: 0x884c0000 (24 C) cpu40: MSR_IA32_PACKAGE_THERM_INTERRUPT: 0x00000003 (100 C, 100 C) turbostat: snapshot_sysfs_counter(/sys/devices/system/cpu/intel_uncore_frequency/package_00_die_00/current_freq_khz): No data available This is because new uncore sysfs is used on these platforms as introduced by commit 9b8dea80e3cb ("platform/x86/intel-uncore-freq: Support for cluster level controls"). With the new uncore sysfs interface, /sys/devices/system/cpu/intel_uncore_frequency/package_00_die_00/current_freq_khz is still available, but reading it fails. How to support the fabric cluster level uncore sysfs is not settled yet, as a short term fix, clear the BIC_UNCORE_MHZ bit when new sysfs I/F is detected. Signed-off-by: Zhang Rui Reviewed-by: Len Brown --- tools/power/x86/turbostat/turbostat.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c index 9a10512e3407..9de1ff6f82ce 100644 --- a/tools/power/x86/turbostat/turbostat.c +++ b/tools/power/x86/turbostat/turbostat.c @@ -4163,6 +4163,10 @@ static void intel_uncore_frequency_probe(void) if (access("/sys/devices/system/cpu/intel_uncore_frequency/package_00_die_00", R_OK)) return; + /* Cluster level sysfs not supported yet. */ + if (!access("/sys/devices/system/cpu/intel_uncore_frequency/uncore00", R_OK)) + return; + if (!access("/sys/devices/system/cpu/intel_uncore_frequency/package_00_die_00/current_freq_khz", R_OK)) BIC_PRESENT(BIC_UNCORE_MHZ); -- cgit v1.2.3 From 137f01b3529d292a68d22e9681e2f903c768f790 Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Sat, 25 Mar 2023 21:57:07 +0800 Subject: tools/power/turbostat: Fix a knl bug MSR_KNL_CORE_C6_RESIDENCY should be evaluated only if 1. this is KNL platform AND 2. need to get C6 residency or need to calculate C1 residency Fix the broken logic introduced by commit 1e9042b9c8d4 ("tools/power turbostat: Fix CPU%C1 display value"). Fixes: 1e9042b9c8d4 ("tools/power turbostat: Fix CPU%C1 display value") Signed-off-by: Zhang Rui Reviewed-by: Len Brown --- tools/power/x86/turbostat/turbostat.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c index 9de1ff6f82ce..fb6c6ddbdb60 100644 --- a/tools/power/x86/turbostat/turbostat.c +++ b/tools/power/x86/turbostat/turbostat.c @@ -2180,7 +2180,7 @@ retry: if ((DO_BIC(BIC_CPU_c6) || soft_c1_residency_display(BIC_CPU_c6)) && !do_knl_cstates) { if (get_msr(cpu, MSR_CORE_C6_RESIDENCY, &c->c6)) return -7; - } else if (do_knl_cstates || soft_c1_residency_display(BIC_CPU_c6)) { + } else if (do_knl_cstates && soft_c1_residency_display(BIC_CPU_c6)) { if (get_msr(cpu, MSR_KNL_CORE_C6_RESIDENCY, &c->c6)) return -7; } -- cgit v1.2.3 From b61b7d8c4c22c4298a50ae5d0ee88facb85ce665 Mon Sep 17 00:00:00 2001 From: Chen Yu Date: Mon, 27 Mar 2023 11:17:44 +0800 Subject: tools/power/turbostat: Enable the C-state Pre-wake printing Currently the C-state Pre-wake will not be printed due to the probe has not been invoked. Invoke the probe function accordingly. Fixes: aeb01e6d71ff ("tools/power turbostat: Print the C-state Pre-wake settings") Signed-off-by: Chen Yu Reviewed-by: Zhang Rui Reviewed-by: Len Brown --- tools/power/x86/turbostat/turbostat.c | 1 + 1 file changed, 1 insertion(+) diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c index fb6c6ddbdb60..03d4f09b103a 100644 --- a/tools/power/x86/turbostat/turbostat.c +++ b/tools/power/x86/turbostat/turbostat.c @@ -5794,6 +5794,7 @@ void process_cpuid() rapl_probe(family, model); perf_limit_reasons_probe(family, model); automatic_cstate_conversion_probe(family, model); + prewake_cstate_probe(family, model); check_tcc_offset(model_orig); -- cgit v1.2.3 From b98a6d78768ec459d394db8bc086d071eb6556c8 Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Fri, 24 Mar 2023 16:30:55 +0800 Subject: tools/power/turbostat: Enable TCC Offset on more models All Models that duplicate INTEL_FAM6_CANNONLAKE_L support TCC Offset. Enable this feature on all these models. Delete obsolete model_orig. Signed-off-by: Zhang Rui Reviewed-by: Len Brown --- tools/power/x86/turbostat/turbostat.c | 19 ++++--------------- 1 file changed, 4 insertions(+), 15 deletions(-) diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c index 03d4f09b103a..d7880870ef68 100644 --- a/tools/power/x86/turbostat/turbostat.c +++ b/tools/power/x86/turbostat/turbostat.c @@ -211,9 +211,6 @@ int *fd_instr_count_percpu; struct timeval interval_tv = { 5, 0 }; struct timespec interval_ts = { 5, 0 }; -/* Save original CPU model */ -unsigned int model_orig; - unsigned int num_iterations; unsigned int header_iterations; unsigned int debug; @@ -4046,14 +4043,7 @@ void check_tcc_offset(int model) switch (model) { case INTEL_FAM6_SKYLAKE_L: - case INTEL_FAM6_SKYLAKE: - case INTEL_FAM6_KABYLAKE_L: - case INTEL_FAM6_KABYLAKE: - case INTEL_FAM6_ICELAKE_L: - case INTEL_FAM6_ICELAKE: - case INTEL_FAM6_TIGERLAKE_L: - case INTEL_FAM6_TIGERLAKE: - case INTEL_FAM6_COMETLAKE: + case INTEL_FAM6_CANNONLAKE_L: if (!get_msr(base_cpu, MSR_PLATFORM_INFO, &msr)) { msr = (msr >> 30) & 1; if (msr) @@ -5573,10 +5563,9 @@ void process_cpuid() edx_flags & (1 << 22) ? "ACPI-TM" : "-", edx_flags & (1 << 28) ? "HT" : "-", edx_flags & (1 << 29) ? "TM" : "-"); } - if (genuine_intel) { - model_orig = model; + + if (genuine_intel) model = intel_model_duplicates(model); - } if (!(edx_flags & (1 << 5))) errx(1, "CPUID: no MSR"); @@ -5796,7 +5785,7 @@ void process_cpuid() automatic_cstate_conversion_probe(family, model); prewake_cstate_probe(family, model); - check_tcc_offset(model_orig); + check_tcc_offset(model); if (!quiet) dump_cstate_pstate_config_info(family, model); -- cgit v1.2.3 From 2c019d657968bdd93e11615e0919d8181a54742d Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Sun, 21 Aug 2022 22:39:16 +0800 Subject: tools/power/turbostat: Support alternative graphics sysfs knobs /sys/class/graphics/fb0/device/drm/card0/ and /sys/class/drm/card0/ point to the same device node. But in some cases, one exists and the other one does not. Prefer to use /sys/class/drm/card0/, and fall back to /sys/class/graphics/fb0/device/drm/card0/. This recovers the "GFXMHz" and "GFXAMHz" columns on some platforms like a SPR server. Reviewed-by: Rodrigo Vivi Signed-off-by: Zhang Rui Reviewed-by: Len Brown --- tools/power/x86/turbostat/turbostat.c | 30 ++++++++++++++++++------------ 1 file changed, 18 insertions(+), 12 deletions(-) diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c index d7880870ef68..f9bc2230db73 100644 --- a/tools/power/x86/turbostat/turbostat.c +++ b/tools/power/x86/turbostat/turbostat.c @@ -3188,8 +3188,8 @@ int snapshot_gfx_rc6_ms(void) /* * snapshot_gfx_mhz() * - * record snapshot of - * /sys/class/graphics/fb0/device/drm/card0/gt_cur_freq_mhz + * fall back to /sys/class/graphics/fb0/device/drm/card0/gt_cur_freq_mhz + * when /sys/class/drm/card0/gt_cur_freq_mhz is not available. * * return 1 if config change requires a restart, else return 0 */ @@ -3198,9 +3198,11 @@ int snapshot_gfx_mhz(void) static FILE *fp; int retval; - if (fp == NULL) - fp = fopen_or_die("/sys/class/graphics/fb0/device/drm/card0/gt_cur_freq_mhz", "r"); - else { + if (fp == NULL) { + fp = fopen("/sys/class/drm/card0/gt_cur_freq_mhz", "r"); + if (!fp) + fp = fopen_or_die("/sys/class/graphics/fb0/device/drm/card0/gt_cur_freq_mhz", "r"); + } else { rewind(fp); fflush(fp); } @@ -3215,8 +3217,8 @@ int snapshot_gfx_mhz(void) /* * snapshot_gfx_cur_mhz() * - * record snapshot of - * /sys/class/graphics/fb0/device/drm/card0/gt_act_freq_mhz + * fall back to /sys/class/graphics/fb0/device/drm/card0/gt_act_freq_mhz + * when /sys/class/drm/card0/gt_act_freq_mhz is not available. * * return 1 if config change requires a restart, else return 0 */ @@ -3225,9 +3227,11 @@ int snapshot_gfx_act_mhz(void) static FILE *fp; int retval; - if (fp == NULL) - fp = fopen_or_die("/sys/class/graphics/fb0/device/drm/card0/gt_act_freq_mhz", "r"); - else { + if (fp == NULL) { + fp = fopen("/sys/class/drm/card0/gt_act_freq_mhz", "r"); + if (!fp) + fp = fopen_or_die("/sys/class/graphics/fb0/device/drm/card0/gt_act_freq_mhz", "r"); + } else { rewind(fp); fflush(fp); } @@ -5804,10 +5808,12 @@ void process_cpuid() if (!access("/sys/class/drm/card0/power/rc6_residency_ms", R_OK)) BIC_PRESENT(BIC_GFX_rc6); - if (!access("/sys/class/graphics/fb0/device/drm/card0/gt_cur_freq_mhz", R_OK)) + if (!access("/sys/class/drm/card0/gt_cur_freq_mhz", R_OK) || + !access("/sys/class/graphics/fb0/device/drm/card0/gt_cur_freq_mhz", R_OK)) BIC_PRESENT(BIC_GFXMHz); - if (!access("/sys/class/graphics/fb0/device/drm/card0/gt_act_freq_mhz", R_OK)) + if (!access("/sys/class/drm/card0/gt_act_freq_mhz", R_OK) || + !access("/sys/class/graphics/fb0/device/drm/card0/gt_act_freq_mhz", R_OK)) BIC_PRESENT(BIC_GFXACTMHz); if (!access("/sys/devices/system/cpu/cpuidle/low_power_idle_cpu_residency_us", R_OK)) -- cgit v1.2.3 From 6d306d6ec7e0f9a5e90f5afd70e3b6c32ae50ce6 Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Fri, 24 Mar 2023 16:26:25 +0800 Subject: tools/power/turbostat: Replace raw value cpu model with Macro Kernel already has #define INTEL_FAM6_NEHALEM_G 0x1F /* Auburndale / Havendale */ Use standard Macro for CPU Model instead of raw value. Signed-off-by: Zhang Rui Reviewed-by: Len Brown --- tools/power/x86/turbostat/turbostat.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c index f9bc2230db73..8d3a8af3692a 100644 --- a/tools/power/x86/turbostat/turbostat.c +++ b/tools/power/x86/turbostat/turbostat.c @@ -5413,7 +5413,7 @@ unsigned int intel_model_duplicates(unsigned int model) switch (model) { case INTEL_FAM6_NEHALEM_EP: /* Core i7, Xeon 5500 series - Bloomfield, Gainstown NHM-EP */ case INTEL_FAM6_NEHALEM: /* Core i7 and i5 Processor - Clarksfield, Lynnfield, Jasper Forest */ - case 0x1F: /* Core i7 and i5 Processor - Nehalem */ + case INTEL_FAM6_NEHALEM_G: /* Core i7 and i5 Processor - Nehalem */ case INTEL_FAM6_WESTMERE: /* Westmere Client - Clarkdale, Arrandale */ case INTEL_FAM6_WESTMERE_EP: /* Westmere EP - Gulftown */ return INTEL_FAM6_NEHALEM; -- cgit v1.2.3 From bbfc33b1e49f443296e56d8b76c77373f700aedc Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Fri, 24 Mar 2023 16:27:30 +0800 Subject: tools/power/turbostat: Remove redundant duplicates Remove redundant duplicates in intel_model_duplicates(). Signed-off-by: Zhang Rui Reviewed-by: Len Brown --- tools/power/x86/turbostat/turbostat.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c index 8d3a8af3692a..2420300939da 100644 --- a/tools/power/x86/turbostat/turbostat.c +++ b/tools/power/x86/turbostat/turbostat.c @@ -5412,24 +5412,20 @@ unsigned int intel_model_duplicates(unsigned int model) switch (model) { case INTEL_FAM6_NEHALEM_EP: /* Core i7, Xeon 5500 series - Bloomfield, Gainstown NHM-EP */ - case INTEL_FAM6_NEHALEM: /* Core i7 and i5 Processor - Clarksfield, Lynnfield, Jasper Forest */ case INTEL_FAM6_NEHALEM_G: /* Core i7 and i5 Processor - Nehalem */ case INTEL_FAM6_WESTMERE: /* Westmere Client - Clarkdale, Arrandale */ case INTEL_FAM6_WESTMERE_EP: /* Westmere EP - Gulftown */ return INTEL_FAM6_NEHALEM; - case INTEL_FAM6_NEHALEM_EX: /* Nehalem-EX Xeon - Beckton */ case INTEL_FAM6_WESTMERE_EX: /* Westmere-EX Xeon - Eagleton */ return INTEL_FAM6_NEHALEM_EX; case INTEL_FAM6_XEON_PHI_KNM: return INTEL_FAM6_XEON_PHI_KNL; - case INTEL_FAM6_BROADWELL_X: case INTEL_FAM6_BROADWELL_D: /* BDX-DE */ return INTEL_FAM6_BROADWELL_X; - case INTEL_FAM6_SKYLAKE_L: case INTEL_FAM6_SKYLAKE: case INTEL_FAM6_KABYLAKE_L: case INTEL_FAM6_KABYLAKE: -- cgit v1.2.3 From 48674c1bb6124fe392e8fed80a39fcb3f62e6551 Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Mon, 27 Mar 2023 12:36:55 +0800 Subject: tools/power/turbostat: Remove pseudo check for two models INTEL_FAM6_ATOM_SILVERMONT_MID/INTEL_FAM6_ATOM_AIRMONT_MID are not listed in probe_nhm_msrs(). This means that most of the turbostat features are not available on these two platforms. Further more, checking for these two models in has_slv_msrs() is dead code. Because has_slv_msrs() is called by the code guarded by probe_nhm_msrs(). For these two reasons, remove pseudo check for INTEL_FAM6_ATOM_SILVERMONT_MID and INTEL_FAM6_ATOM_AIRMONT_MID. Will add back the support when we can access these two platforms. Signed-off-by: Zhang Rui Reviewed-by: Len Brown --- tools/power/x86/turbostat/turbostat.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c index 2420300939da..b8874d3dc83e 100644 --- a/tools/power/x86/turbostat/turbostat.c +++ b/tools/power/x86/turbostat/turbostat.c @@ -3792,8 +3792,6 @@ int has_slv_msrs(unsigned int family, unsigned int model) switch (model) { case INTEL_FAM6_ATOM_SILVERMONT: - case INTEL_FAM6_ATOM_SILVERMONT_MID: - case INTEL_FAM6_ATOM_AIRMONT_MID: return 1; } return 0; -- cgit v1.2.3 From 45232ab168a3c5abad86eafaef2beed8d7037666 Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Sun, 27 Aug 2023 21:52:53 +0800 Subject: tools/power/turbostat: Add skeleton support for table driven feature enumeration Turbostat supports a series of features that may diverge among different CPU models. Current code uses various of CPU model checks in different places to handle this, which makes the code hard to maintain. Add skeleton support for table driven feature enumeration to replace the current error-prone CPU model checks and global variables. Note: by comparing the CPU models with intel-family.h, it is found that turbostat support for below four Models are missing, including INTEL_FAM6_ICELAKE, INTEL_FAM6_ATOM_SILVERMONT_MID, INTEL_FAM6_ATOM_AIRMONT_MID and INTEL_FAM6_ATOM_AIRMONT_NP. Adding support for these models is a different work, thus it is not covered in this patch set. Signed-off-by: Zhang Rui Reviewed-by: Len Brown --- tools/power/x86/turbostat/turbostat.c | 192 ++++++++++++++++++++++++++++++++++ 1 file changed, 192 insertions(+) diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c index b8874d3dc83e..4deea374188a 100644 --- a/tools/power/x86/turbostat/turbostat.c +++ b/tools/power/x86/turbostat/turbostat.c @@ -281,6 +281,197 @@ unsigned int has_misc_feature_control; unsigned int first_counter_read = 1; int ignore_stdin; +/* Model specific support Start */ + +/* List of features that may diverge among different platforms */ +struct platform_features { +}; + +struct platform_data { + unsigned int model; + const struct platform_features *features; +}; + +static const struct platform_features nhm_features = { +}; + +static const struct platform_features nhx_features = { +}; + +static const struct platform_features snb_features = { +}; + +static const struct platform_features snx_features = { +}; + +static const struct platform_features ivb_features = { +}; + +static const struct platform_features ivx_features = { +}; + +static const struct platform_features hsw_features = { +}; + +static const struct platform_features hsx_features = { +}; + +static const struct platform_features hswl_features = { +}; + +static const struct platform_features hswg_features = { +}; + +static const struct platform_features bdw_features = { +}; + +static const struct platform_features bdwg_features = { +}; + +static const struct platform_features bdx_features = { +}; + +static const struct platform_features skl_features = { +}; + +static const struct platform_features cnl_features = { +}; + +static const struct platform_features skx_features = { +}; + +static const struct platform_features icx_features = { +}; + +static const struct platform_features spr_features = { +}; + +static const struct platform_features slv_features = { +}; + +static const struct platform_features slvd_features = { +}; + +static const struct platform_features amt_features = { +}; + +static const struct platform_features gmt_features = { +}; + +static const struct platform_features gmtd_features = { +}; + +static const struct platform_features gmtp_features = { +}; + +static const struct platform_features tmt_features = { +}; + +static const struct platform_features tmtd_features = { +}; + +static const struct platform_features knl_features = { +}; + +static const struct platform_features default_features = { +}; + +static const struct platform_features amd_features = { +}; + +static const struct platform_data turbostat_pdata[] = { + { INTEL_FAM6_NEHALEM, &nhm_features }, + { INTEL_FAM6_NEHALEM_G, &nhm_features }, + { INTEL_FAM6_NEHALEM_EP, &nhm_features }, + { INTEL_FAM6_NEHALEM_EX, &nhx_features }, + { INTEL_FAM6_WESTMERE, &nhm_features }, + { INTEL_FAM6_WESTMERE_EP, &nhm_features }, + { INTEL_FAM6_WESTMERE_EX, &nhx_features }, + { INTEL_FAM6_SANDYBRIDGE, &snb_features }, + { INTEL_FAM6_SANDYBRIDGE_X, &snx_features }, + { INTEL_FAM6_IVYBRIDGE, &ivb_features }, + { INTEL_FAM6_IVYBRIDGE_X, &ivx_features }, + { INTEL_FAM6_HASWELL, &hsw_features }, + { INTEL_FAM6_HASWELL_X, &hsx_features }, + { INTEL_FAM6_HASWELL_L, &hswl_features }, + { INTEL_FAM6_HASWELL_G, &hswg_features }, + { INTEL_FAM6_BROADWELL, &bdw_features }, + { INTEL_FAM6_BROADWELL_G, &bdwg_features }, + { INTEL_FAM6_BROADWELL_X, &bdx_features }, + { INTEL_FAM6_BROADWELL_D, &bdx_features }, + { INTEL_FAM6_SKYLAKE_L, &skl_features }, + { INTEL_FAM6_SKYLAKE, &skl_features }, + { INTEL_FAM6_SKYLAKE_X, &skx_features }, + { INTEL_FAM6_KABYLAKE_L, &skl_features }, + { INTEL_FAM6_KABYLAKE, &skl_features }, + { INTEL_FAM6_COMETLAKE, &skl_features }, + { INTEL_FAM6_COMETLAKE_L, &skl_features }, + { INTEL_FAM6_CANNONLAKE_L, &cnl_features }, + { INTEL_FAM6_ICELAKE_X, &icx_features }, + { INTEL_FAM6_ICELAKE_D, &icx_features }, + { INTEL_FAM6_ICELAKE_L, &cnl_features }, + { INTEL_FAM6_ICELAKE_NNPI, &cnl_features }, + { INTEL_FAM6_ROCKETLAKE, &cnl_features }, + { INTEL_FAM6_TIGERLAKE_L, &cnl_features }, + { INTEL_FAM6_TIGERLAKE, &cnl_features }, + { INTEL_FAM6_SAPPHIRERAPIDS_X, &spr_features }, + { INTEL_FAM6_EMERALDRAPIDS_X, &spr_features }, + { INTEL_FAM6_LAKEFIELD, &cnl_features }, + { INTEL_FAM6_ALDERLAKE, &cnl_features }, + { INTEL_FAM6_ALDERLAKE_L, &cnl_features }, + { INTEL_FAM6_RAPTORLAKE, &cnl_features }, + { INTEL_FAM6_RAPTORLAKE_P, &cnl_features }, + { INTEL_FAM6_RAPTORLAKE_S, &cnl_features }, + { INTEL_FAM6_METEORLAKE, &cnl_features }, + { INTEL_FAM6_METEORLAKE_L, &cnl_features }, + { INTEL_FAM6_ATOM_SILVERMONT, &slv_features }, + { INTEL_FAM6_ATOM_SILVERMONT_D, &slvd_features }, + { INTEL_FAM6_ATOM_AIRMONT, &amt_features }, + { INTEL_FAM6_ATOM_GOLDMONT, &gmt_features }, + { INTEL_FAM6_ATOM_GOLDMONT_D, &gmtd_features }, + { INTEL_FAM6_ATOM_GOLDMONT_PLUS, &gmtp_features }, + { INTEL_FAM6_ATOM_TREMONT_D, &tmtd_features }, + { INTEL_FAM6_ATOM_TREMONT, &tmt_features }, + { INTEL_FAM6_ATOM_TREMONT_L, &tmt_features }, + { INTEL_FAM6_ATOM_GRACEMONT, &cnl_features }, + { INTEL_FAM6_XEON_PHI_KNL, &knl_features }, + { INTEL_FAM6_XEON_PHI_KNM, &knl_features }, + /* + * Missing support for + * INTEL_FAM6_ICELAKE + * INTEL_FAM6_ATOM_SILVERMONT_MID + * INTEL_FAM6_ATOM_AIRMONT_MID + * INTEL_FAM6_ATOM_AIRMONT_NP + */ + { 0, NULL }, +}; + +static const struct platform_features *platform; + +void probe_platform_features(unsigned int family, unsigned int model) +{ + int i; + + if (authentic_amd || hygon_genuine) { + platform = &amd_features; + return; + } + + platform = &default_features; + + if (!genuine_intel || family != 6) + return; + + for (i = 0; turbostat_pdata[i].features; i++) { + if (turbostat_pdata[i].model == model) { + platform = turbostat_pdata[i].features; + return; + } + } +} + +/* Model specific support End */ + #define RAPL_PKG (1 << 0) /* 0x610 MSR_PKG_POWER_LIMIT */ /* 0x611 MSR_PKG_ENERGY_STATUS */ @@ -5562,6 +5753,7 @@ void process_cpuid() edx_flags & (1 << 28) ? "HT" : "-", edx_flags & (1 << 29) ? "TM" : "-"); } + probe_platform_features(family, model); if (genuine_intel) model = intel_model_duplicates(model); -- cgit v1.2.3 From 778fc34a7a3db2811e28ce570318dd047f278cb2 Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Mon, 21 Aug 2023 15:26:32 +0800 Subject: tools/power/turbostat: Abstract MSR_MISC_FEATURE_CONTROL support Abstract MSR_MISC_FEATURE_CONTROL support. Signed-off-by: Zhang Rui Reviewed-by: Len Brown --- tools/power/x86/turbostat/turbostat.c | 25 ++++++++++++++++++------- 1 file changed, 18 insertions(+), 7 deletions(-) diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c index 4deea374188a..7eaa0adf72e0 100644 --- a/tools/power/x86/turbostat/turbostat.c +++ b/tools/power/x86/turbostat/turbostat.c @@ -277,7 +277,6 @@ unsigned int has_hwp_notify; /* IA32_HWP_INTERRUPT */ unsigned int has_hwp_activity_window; /* IA32_HWP_REQUEST[bits 41:32] */ unsigned int has_hwp_epp; /* IA32_HWP_REQUEST[bits 31:24] */ unsigned int has_hwp_pkg; /* IA32_HWP_REQUEST_PKG */ -unsigned int has_misc_feature_control; unsigned int first_counter_read = 1; int ignore_stdin; @@ -285,6 +284,7 @@ int ignore_stdin; /* List of features that may diverge among different platforms */ struct platform_features { + bool has_msr_misc_feature_control; /* MSR_MISC_FEATURE_CONTROL */ }; struct platform_data { @@ -299,51 +299,67 @@ static const struct platform_features nhx_features = { }; static const struct platform_features snb_features = { + .has_msr_misc_feature_control = 1, }; static const struct platform_features snx_features = { + .has_msr_misc_feature_control = 1, }; static const struct platform_features ivb_features = { + .has_msr_misc_feature_control = 1, }; static const struct platform_features ivx_features = { + .has_msr_misc_feature_control = 1, }; static const struct platform_features hsw_features = { + .has_msr_misc_feature_control = 1, }; static const struct platform_features hsx_features = { + .has_msr_misc_feature_control = 1, }; static const struct platform_features hswl_features = { + .has_msr_misc_feature_control = 1, }; static const struct platform_features hswg_features = { + .has_msr_misc_feature_control = 1, }; static const struct platform_features bdw_features = { + .has_msr_misc_feature_control = 1, }; static const struct platform_features bdwg_features = { + .has_msr_misc_feature_control = 1, }; static const struct platform_features bdx_features = { + .has_msr_misc_feature_control = 1, }; static const struct platform_features skl_features = { + .has_msr_misc_feature_control = 1, }; static const struct platform_features cnl_features = { + .has_msr_misc_feature_control = 1, }; static const struct platform_features skx_features = { + .has_msr_misc_feature_control = 1, }; static const struct platform_features icx_features = { + .has_msr_misc_feature_control = 1, }; static const struct platform_features spr_features = { + .has_msr_misc_feature_control = 1, }; static const struct platform_features slv_features = { @@ -3883,7 +3899,6 @@ void check_permissions(void) * * Side effect: * sets global pkg_cstate_limit to decode MSR_PKG_CST_CONFIG_CONTROL - * sets has_misc_feature_control */ int probe_nhm_msrs(unsigned int family, unsigned int model) { @@ -3909,7 +3924,6 @@ int probe_nhm_msrs(unsigned int family, unsigned int model) case INTEL_FAM6_IVYBRIDGE: /* IVB */ case INTEL_FAM6_IVYBRIDGE_X: /* IVB Xeon */ pkg_cstate_limits = snb_pkg_cstate_limits; - has_misc_feature_control = 1; break; case INTEL_FAM6_HASWELL: /* HSW */ case INTEL_FAM6_HASWELL_G: /* HSW */ @@ -3921,16 +3935,13 @@ int probe_nhm_msrs(unsigned int family, unsigned int model) case INTEL_FAM6_SKYLAKE_L: /* SKL */ case INTEL_FAM6_CANNONLAKE_L: /* CNL */ pkg_cstate_limits = hsw_pkg_cstate_limits; - has_misc_feature_control = 1; break; case INTEL_FAM6_SKYLAKE_X: /* SKX */ case INTEL_FAM6_SAPPHIRERAPIDS_X: /* SPR */ pkg_cstate_limits = skx_pkg_cstate_limits; - has_misc_feature_control = 1; break; case INTEL_FAM6_ICELAKE_X: /* ICX */ pkg_cstate_limits = icx_pkg_cstate_limits; - has_misc_feature_control = 1; break; case INTEL_FAM6_ATOM_SILVERMONT: /* BYT */ no_MSR_MISC_PWR_MGMT = 1; @@ -5541,7 +5552,7 @@ void decode_misc_feature_control(void) { unsigned long long msr; - if (!has_misc_feature_control) + if (!platform->has_msr_misc_feature_control) return; if (!get_msr(base_cpu, MSR_MISC_FEATURE_CONTROL, &msr)) -- cgit v1.2.3 From 3dd0e7547d11e770bafb40ad41f2631cc4b16649 Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Mon, 21 Aug 2023 22:12:57 +0800 Subject: tools/power/turbostat: Abstract MSR_MISC_PWR_MGMT support Abstract MSR_MISC_PWR_MGMT support. Signed-off-by: Zhang Rui Reviewed-by: Len Brown --- tools/power/x86/turbostat/turbostat.c | 31 +++++++++++++++++++++++++++---- 1 file changed, 27 insertions(+), 4 deletions(-) diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c index 7eaa0adf72e0..9507f310e212 100644 --- a/tools/power/x86/turbostat/turbostat.c +++ b/tools/power/x86/turbostat/turbostat.c @@ -238,7 +238,6 @@ unsigned int hygon_genuine; unsigned int max_level, max_extended_level; unsigned int has_invariant_tsc; unsigned int do_nhm_platform_info; -unsigned int no_MSR_MISC_PWR_MGMT; unsigned int aperf_mperf_multiplier = 1; double bclk; double base_hz; @@ -285,6 +284,7 @@ int ignore_stdin; /* List of features that may diverge among different platforms */ struct platform_features { bool has_msr_misc_feature_control; /* MSR_MISC_FEATURE_CONTROL */ + bool has_msr_misc_pwr_mgmt; /* MSR_MISC_PWR_MGMT */ }; struct platform_data { @@ -293,100 +293,125 @@ struct platform_data { }; static const struct platform_features nhm_features = { + .has_msr_misc_pwr_mgmt = 1, }; static const struct platform_features nhx_features = { + .has_msr_misc_pwr_mgmt = 1, }; static const struct platform_features snb_features = { .has_msr_misc_feature_control = 1, + .has_msr_misc_pwr_mgmt = 1, }; static const struct platform_features snx_features = { .has_msr_misc_feature_control = 1, + .has_msr_misc_pwr_mgmt = 1, }; static const struct platform_features ivb_features = { .has_msr_misc_feature_control = 1, + .has_msr_misc_pwr_mgmt = 1, }; static const struct platform_features ivx_features = { .has_msr_misc_feature_control = 1, + .has_msr_misc_pwr_mgmt = 1, }; static const struct platform_features hsw_features = { .has_msr_misc_feature_control = 1, + .has_msr_misc_pwr_mgmt = 1, }; static const struct platform_features hsx_features = { .has_msr_misc_feature_control = 1, + .has_msr_misc_pwr_mgmt = 1, }; static const struct platform_features hswl_features = { .has_msr_misc_feature_control = 1, + .has_msr_misc_pwr_mgmt = 1, }; static const struct platform_features hswg_features = { .has_msr_misc_feature_control = 1, + .has_msr_misc_pwr_mgmt = 1, }; static const struct platform_features bdw_features = { .has_msr_misc_feature_control = 1, + .has_msr_misc_pwr_mgmt = 1, }; static const struct platform_features bdwg_features = { .has_msr_misc_feature_control = 1, + .has_msr_misc_pwr_mgmt = 1, }; static const struct platform_features bdx_features = { .has_msr_misc_feature_control = 1, + .has_msr_misc_pwr_mgmt = 1, }; static const struct platform_features skl_features = { .has_msr_misc_feature_control = 1, + .has_msr_misc_pwr_mgmt = 1, }; static const struct platform_features cnl_features = { .has_msr_misc_feature_control = 1, + .has_msr_misc_pwr_mgmt = 1, }; static const struct platform_features skx_features = { .has_msr_misc_feature_control = 1, + .has_msr_misc_pwr_mgmt = 1, }; static const struct platform_features icx_features = { .has_msr_misc_feature_control = 1, + .has_msr_misc_pwr_mgmt = 1, }; static const struct platform_features spr_features = { .has_msr_misc_feature_control = 1, + .has_msr_misc_pwr_mgmt = 1, }; static const struct platform_features slv_features = { }; static const struct platform_features slvd_features = { + .has_msr_misc_pwr_mgmt = 1, }; static const struct platform_features amt_features = { }; static const struct platform_features gmt_features = { + .has_msr_misc_pwr_mgmt = 1, }; static const struct platform_features gmtd_features = { + .has_msr_misc_pwr_mgmt = 1, }; static const struct platform_features gmtp_features = { + .has_msr_misc_pwr_mgmt = 1, }; static const struct platform_features tmt_features = { + .has_msr_misc_pwr_mgmt = 1, }; static const struct platform_features tmtd_features = { + .has_msr_misc_pwr_mgmt = 1, }; static const struct platform_features knl_features = { + .has_msr_misc_pwr_mgmt = 1, }; static const struct platform_features default_features = { @@ -3944,14 +3969,12 @@ int probe_nhm_msrs(unsigned int family, unsigned int model) pkg_cstate_limits = icx_pkg_cstate_limits; break; case INTEL_FAM6_ATOM_SILVERMONT: /* BYT */ - no_MSR_MISC_PWR_MGMT = 1; /* FALLTHRU */ case INTEL_FAM6_ATOM_SILVERMONT_D: /* AVN */ pkg_cstate_limits = slv_pkg_cstate_limits; break; case INTEL_FAM6_ATOM_AIRMONT: /* AMT */ pkg_cstate_limits = amt_pkg_cstate_limits; - no_MSR_MISC_PWR_MGMT = 1; break; case INTEL_FAM6_XEON_PHI_KNL: /* PHI */ pkg_cstate_limits = phi_pkg_cstate_limits; @@ -5576,7 +5599,7 @@ void decode_misc_pwr_mgmt_msr(void) if (!do_nhm_platform_info) return; - if (no_MSR_MISC_PWR_MGMT) + if (!platform->has_msr_misc_pwr_mgmt) return; if (!get_msr(base_cpu, MSR_MISC_PWR_MGMT, &msr)) -- cgit v1.2.3 From 71e841293c715797d8c6ae8cdc3f74b4396c5570 Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Mon, 21 Aug 2023 22:22:48 +0800 Subject: tools/power/turbostat: Abstract BCLK frequency support Abstract CPU base clock frequency support. Note that bclk is used by 1. calculate base_hz using MSR_PLATFORM_INFO, which is guarded by probe_nhm_msrs(). 2. dump MSR_PLATFORM_INFO and Turbo Ratio Limit MSRs, which are also guarded by probe_nhm_msrs(). Thus probe_bclk() works for probe_nhm_msrs() models only. Signed-off-by: Zhang Rui Reviewed-by: Len Brown --- tools/power/x86/turbostat/turbostat.c | 131 ++++++++++++++++++++++------------ 1 file changed, 87 insertions(+), 44 deletions(-) diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c index 9507f310e212..66ba70017d53 100644 --- a/tools/power/x86/turbostat/turbostat.c +++ b/tools/power/x86/turbostat/turbostat.c @@ -269,7 +269,6 @@ unsigned int do_ring_perf_limit_reasons; unsigned int crystal_hz; unsigned long long tsc_hz; int base_cpu; -double discover_bclk(unsigned int family, unsigned int model); unsigned int has_hwp; /* IA32_PM_ENABLE, IA32_HWP_CAPABILITIES */ /* IA32_HWP_REQUEST, IA32_HWP_STATUS */ unsigned int has_hwp_notify; /* IA32_HWP_INTERRUPT */ @@ -279,12 +278,15 @@ unsigned int has_hwp_pkg; /* IA32_HWP_REQUEST_PKG */ unsigned int first_counter_read = 1; int ignore_stdin; +int get_msr(int cpu, off_t offset, unsigned long long *msr); + /* Model specific support Start */ /* List of features that may diverge among different platforms */ struct platform_features { bool has_msr_misc_feature_control; /* MSR_MISC_FEATURE_CONTROL */ bool has_msr_misc_pwr_mgmt; /* MSR_MISC_PWR_MGMT */ + int bclk_freq; /* CPU base clock */ }; struct platform_data { @@ -292,126 +294,185 @@ struct platform_data { const struct platform_features *features; }; +/* For BCLK */ +enum bclk_freq { + BCLK_100MHZ = 1, + BCLK_133MHZ, + BCLK_SLV, +}; + +#define SLM_BCLK_FREQS 5 +double slm_freq_table[SLM_BCLK_FREQS] = { 83.3, 100.0, 133.3, 116.7, 80.0 }; + +double slm_bclk(void) +{ + unsigned long long msr = 3; + unsigned int i; + double freq; + + if (get_msr(base_cpu, MSR_FSB_FREQ, &msr)) + fprintf(outf, "SLM BCLK: unknown\n"); + + i = msr & 0xf; + if (i >= SLM_BCLK_FREQS) { + fprintf(outf, "SLM BCLK[%d] invalid\n", i); + i = 3; + } + freq = slm_freq_table[i]; + + if (!quiet) + fprintf(outf, "SLM BCLK: %.1f Mhz\n", freq); + + return freq; +} + static const struct platform_features nhm_features = { .has_msr_misc_pwr_mgmt = 1, + .bclk_freq = BCLK_133MHZ, }; static const struct platform_features nhx_features = { .has_msr_misc_pwr_mgmt = 1, + .bclk_freq = BCLK_133MHZ, }; static const struct platform_features snb_features = { .has_msr_misc_feature_control = 1, .has_msr_misc_pwr_mgmt = 1, + .bclk_freq = BCLK_100MHZ, }; static const struct platform_features snx_features = { .has_msr_misc_feature_control = 1, .has_msr_misc_pwr_mgmt = 1, + .bclk_freq = BCLK_100MHZ, }; static const struct platform_features ivb_features = { .has_msr_misc_feature_control = 1, .has_msr_misc_pwr_mgmt = 1, + .bclk_freq = BCLK_100MHZ, }; static const struct platform_features ivx_features = { .has_msr_misc_feature_control = 1, .has_msr_misc_pwr_mgmt = 1, + .bclk_freq = BCLK_100MHZ, }; static const struct platform_features hsw_features = { .has_msr_misc_feature_control = 1, .has_msr_misc_pwr_mgmt = 1, + .bclk_freq = BCLK_100MHZ, }; static const struct platform_features hsx_features = { .has_msr_misc_feature_control = 1, .has_msr_misc_pwr_mgmt = 1, + .bclk_freq = BCLK_100MHZ, }; static const struct platform_features hswl_features = { .has_msr_misc_feature_control = 1, .has_msr_misc_pwr_mgmt = 1, + .bclk_freq = BCLK_100MHZ, }; static const struct platform_features hswg_features = { .has_msr_misc_feature_control = 1, .has_msr_misc_pwr_mgmt = 1, + .bclk_freq = BCLK_100MHZ, }; static const struct platform_features bdw_features = { .has_msr_misc_feature_control = 1, .has_msr_misc_pwr_mgmt = 1, + .bclk_freq = BCLK_100MHZ, }; static const struct platform_features bdwg_features = { .has_msr_misc_feature_control = 1, .has_msr_misc_pwr_mgmt = 1, + .bclk_freq = BCLK_100MHZ, }; static const struct platform_features bdx_features = { .has_msr_misc_feature_control = 1, .has_msr_misc_pwr_mgmt = 1, + .bclk_freq = BCLK_100MHZ, }; static const struct platform_features skl_features = { .has_msr_misc_feature_control = 1, .has_msr_misc_pwr_mgmt = 1, + .bclk_freq = BCLK_100MHZ, }; static const struct platform_features cnl_features = { .has_msr_misc_feature_control = 1, .has_msr_misc_pwr_mgmt = 1, + .bclk_freq = BCLK_100MHZ, }; static const struct platform_features skx_features = { .has_msr_misc_feature_control = 1, .has_msr_misc_pwr_mgmt = 1, + .bclk_freq = BCLK_100MHZ, }; static const struct platform_features icx_features = { .has_msr_misc_feature_control = 1, .has_msr_misc_pwr_mgmt = 1, + .bclk_freq = BCLK_100MHZ, }; static const struct platform_features spr_features = { .has_msr_misc_feature_control = 1, .has_msr_misc_pwr_mgmt = 1, + .bclk_freq = BCLK_100MHZ, }; static const struct platform_features slv_features = { + .bclk_freq = BCLK_SLV, }; static const struct platform_features slvd_features = { .has_msr_misc_pwr_mgmt = 1, + .bclk_freq = BCLK_SLV, }; static const struct platform_features amt_features = { + .bclk_freq = BCLK_133MHZ, }; static const struct platform_features gmt_features = { .has_msr_misc_pwr_mgmt = 1, + .bclk_freq = BCLK_100MHZ, }; static const struct platform_features gmtd_features = { .has_msr_misc_pwr_mgmt = 1, + .bclk_freq = BCLK_100MHZ, }; static const struct platform_features gmtp_features = { .has_msr_misc_pwr_mgmt = 1, + .bclk_freq = BCLK_100MHZ, }; static const struct platform_features tmt_features = { .has_msr_misc_pwr_mgmt = 1, + .bclk_freq = BCLK_100MHZ, }; static const struct platform_features tmtd_features = { .has_msr_misc_pwr_mgmt = 1, + .bclk_freq = BCLK_100MHZ, }; static const struct platform_features knl_features = { .has_msr_misc_pwr_mgmt = 1, + .bclk_freq = BCLK_100MHZ, }; static const struct platform_features default_features = { @@ -3907,6 +3968,30 @@ void check_permissions(void) exit(-6); } +void probe_bclk(void) +{ + unsigned long long msr; + unsigned int base_ratio; + + if (!do_nhm_platform_info) + return; + + if (platform->bclk_freq == BCLK_100MHZ) + bclk = 100.00; + else if (platform->bclk_freq == BCLK_133MHZ) + bclk = 133.33; + else if (platform->bclk_freq == BCLK_SLV) + bclk = slm_bclk(); + else + return; + + get_msr(base_cpu, MSR_PLATFORM_INFO, &msr); + base_ratio = (msr >> 8) & 0xFF; + + base_hz = base_ratio * bclk * 1000000; + has_base_hz = 1; +} + /* * NHM adds support for additional MSRs: * @@ -3928,7 +4013,6 @@ void check_permissions(void) int probe_nhm_msrs(unsigned int family, unsigned int model) { unsigned long long msr; - unsigned int base_ratio; int *pkg_cstate_limits; if (!genuine_intel) @@ -3937,8 +4021,6 @@ int probe_nhm_msrs(unsigned int family, unsigned int model) if (family != 6) return 0; - bclk = discover_bclk(family, model); - switch (model) { case INTEL_FAM6_NEHALEM: /* Core i7 and i5 Processor - Clarksfield, Lynnfield, Jasper Forest */ case INTEL_FAM6_NEHALEM_EX: /* Nehalem-EX Xeon - Beckton */ @@ -3992,11 +4074,6 @@ int probe_nhm_msrs(unsigned int family, unsigned int model) get_msr(base_cpu, MSR_PKG_CST_CONFIG_CONTROL, &msr); pkg_cstate_limit = pkg_cstate_limits[msr & 0xF]; - get_msr(base_cpu, MSR_PLATFORM_INFO, &msr); - base_ratio = (msr >> 8) & 0xFF; - - base_hz = base_ratio * bclk * 1000000; - has_base_hz = 1; return 1; } @@ -5403,41 +5480,6 @@ unsigned int get_aperf_mperf_multiplier(unsigned int family, unsigned int model) return 1; } -#define SLM_BCLK_FREQS 5 -double slm_freq_table[SLM_BCLK_FREQS] = { 83.3, 100.0, 133.3, 116.7, 80.0 }; - -double slm_bclk(void) -{ - unsigned long long msr = 3; - unsigned int i; - double freq; - - if (get_msr(base_cpu, MSR_FSB_FREQ, &msr)) - fprintf(outf, "SLM BCLK: unknown\n"); - - i = msr & 0xf; - if (i >= SLM_BCLK_FREQS) { - fprintf(outf, "SLM BCLK[%d] invalid\n", i); - i = 3; - } - freq = slm_freq_table[i]; - - if (!quiet) - fprintf(outf, "SLM BCLK: %.1f Mhz\n", freq); - - return freq; -} - -double discover_bclk(unsigned int family, unsigned int model) -{ - if (has_snb_msrs(family, model) || is_knl(family, model)) - return 100.00; - else if (is_slm(family, model)) - return slm_bclk(); - else - return 133.33; -} - int get_cpu_type(struct thread_data *t, struct core_data *c, struct pkg_data *p) { unsigned int eax, ebx, ecx, edx; @@ -5929,6 +5971,7 @@ void process_cpuid() BIC_PRESENT(BIC_CPU_c6); BIC_PRESENT(BIC_SMI); } + probe_bclk(); do_snb_cstates = has_snb_msrs(family, model); if (do_snb_cstates) -- cgit v1.2.3 From 3989fc890782c8002477895e9f24ffb98a132293 Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Sun, 27 Aug 2023 22:37:06 +0800 Subject: tools/power/turbostat: Abstract Package cstate limit decoding support Abstract the support for decoding package cstate limit from MSR_PKG_CST_CONFIG_CONTROL. Signed-off-by: Zhang Rui Reviewed-by: Len Brown --- tools/power/x86/turbostat/turbostat.c | 112 ++++++++++++++++++++++++++-------- 1 file changed, 86 insertions(+), 26 deletions(-) diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c index 66ba70017d53..bcad9332a3b2 100644 --- a/tools/power/x86/turbostat/turbostat.c +++ b/tools/power/x86/turbostat/turbostat.c @@ -287,6 +287,7 @@ struct platform_features { bool has_msr_misc_feature_control; /* MSR_MISC_FEATURE_CONTROL */ bool has_msr_misc_pwr_mgmt; /* MSR_MISC_PWR_MGMT */ int bclk_freq; /* CPU base clock */ + int cst_limit; /* MSR_PKG_CST_CONFIG_CONTROL */ }; struct platform_data { @@ -326,153 +327,193 @@ double slm_bclk(void) return freq; } +/* For Package cstate limit */ +enum package_cstate_limit { + CST_LIMIT_NHM = 1, + CST_LIMIT_SNB, + CST_LIMIT_HSW, + CST_LIMIT_SKX, + CST_LIMIT_ICX, + CST_LIMIT_SLV, + CST_LIMIT_AMT, + CST_LIMIT_KNL, + CST_LIMIT_GMT, +}; + static const struct platform_features nhm_features = { .has_msr_misc_pwr_mgmt = 1, .bclk_freq = BCLK_133MHZ, + .cst_limit = CST_LIMIT_NHM, }; static const struct platform_features nhx_features = { .has_msr_misc_pwr_mgmt = 1, .bclk_freq = BCLK_133MHZ, + .cst_limit = CST_LIMIT_NHM, }; static const struct platform_features snb_features = { .has_msr_misc_feature_control = 1, .has_msr_misc_pwr_mgmt = 1, .bclk_freq = BCLK_100MHZ, + .cst_limit = CST_LIMIT_SNB, }; static const struct platform_features snx_features = { .has_msr_misc_feature_control = 1, .has_msr_misc_pwr_mgmt = 1, .bclk_freq = BCLK_100MHZ, + .cst_limit = CST_LIMIT_SNB, }; static const struct platform_features ivb_features = { .has_msr_misc_feature_control = 1, .has_msr_misc_pwr_mgmt = 1, .bclk_freq = BCLK_100MHZ, + .cst_limit = CST_LIMIT_SNB, }; static const struct platform_features ivx_features = { .has_msr_misc_feature_control = 1, .has_msr_misc_pwr_mgmt = 1, .bclk_freq = BCLK_100MHZ, + .cst_limit = CST_LIMIT_SNB, }; static const struct platform_features hsw_features = { .has_msr_misc_feature_control = 1, .has_msr_misc_pwr_mgmt = 1, .bclk_freq = BCLK_100MHZ, + .cst_limit = CST_LIMIT_HSW, }; static const struct platform_features hsx_features = { .has_msr_misc_feature_control = 1, .has_msr_misc_pwr_mgmt = 1, .bclk_freq = BCLK_100MHZ, + .cst_limit = CST_LIMIT_HSW, }; static const struct platform_features hswl_features = { .has_msr_misc_feature_control = 1, .has_msr_misc_pwr_mgmt = 1, .bclk_freq = BCLK_100MHZ, + .cst_limit = CST_LIMIT_HSW, }; static const struct platform_features hswg_features = { .has_msr_misc_feature_control = 1, .has_msr_misc_pwr_mgmt = 1, .bclk_freq = BCLK_100MHZ, + .cst_limit = CST_LIMIT_HSW, }; static const struct platform_features bdw_features = { .has_msr_misc_feature_control = 1, .has_msr_misc_pwr_mgmt = 1, .bclk_freq = BCLK_100MHZ, + .cst_limit = CST_LIMIT_HSW, }; static const struct platform_features bdwg_features = { .has_msr_misc_feature_control = 1, .has_msr_misc_pwr_mgmt = 1, .bclk_freq = BCLK_100MHZ, + .cst_limit = CST_LIMIT_HSW, }; static const struct platform_features bdx_features = { .has_msr_misc_feature_control = 1, .has_msr_misc_pwr_mgmt = 1, .bclk_freq = BCLK_100MHZ, + .cst_limit = CST_LIMIT_HSW, }; static const struct platform_features skl_features = { .has_msr_misc_feature_control = 1, .has_msr_misc_pwr_mgmt = 1, .bclk_freq = BCLK_100MHZ, + .cst_limit = CST_LIMIT_HSW, }; static const struct platform_features cnl_features = { .has_msr_misc_feature_control = 1, .has_msr_misc_pwr_mgmt = 1, .bclk_freq = BCLK_100MHZ, + .cst_limit = CST_LIMIT_HSW, }; static const struct platform_features skx_features = { .has_msr_misc_feature_control = 1, .has_msr_misc_pwr_mgmt = 1, .bclk_freq = BCLK_100MHZ, + .cst_limit = CST_LIMIT_SKX, }; static const struct platform_features icx_features = { .has_msr_misc_feature_control = 1, .has_msr_misc_pwr_mgmt = 1, .bclk_freq = BCLK_100MHZ, + .cst_limit = CST_LIMIT_ICX, }; static const struct platform_features spr_features = { .has_msr_misc_feature_control = 1, .has_msr_misc_pwr_mgmt = 1, .bclk_freq = BCLK_100MHZ, + .cst_limit = CST_LIMIT_SKX, }; static const struct platform_features slv_features = { .bclk_freq = BCLK_SLV, + .cst_limit = CST_LIMIT_SLV, }; static const struct platform_features slvd_features = { .has_msr_misc_pwr_mgmt = 1, .bclk_freq = BCLK_SLV, + .cst_limit = CST_LIMIT_SLV, }; static const struct platform_features amt_features = { .bclk_freq = BCLK_133MHZ, + .cst_limit = CST_LIMIT_AMT, }; static const struct platform_features gmt_features = { .has_msr_misc_pwr_mgmt = 1, .bclk_freq = BCLK_100MHZ, + .cst_limit = CST_LIMIT_GMT, }; static const struct platform_features gmtd_features = { .has_msr_misc_pwr_mgmt = 1, .bclk_freq = BCLK_100MHZ, + .cst_limit = CST_LIMIT_GMT, }; static const struct platform_features gmtp_features = { .has_msr_misc_pwr_mgmt = 1, .bclk_freq = BCLK_100MHZ, + .cst_limit = CST_LIMIT_GMT, }; static const struct platform_features tmt_features = { .has_msr_misc_pwr_mgmt = 1, .bclk_freq = BCLK_100MHZ, + .cst_limit = CST_LIMIT_GMT, }; static const struct platform_features tmtd_features = { .has_msr_misc_pwr_mgmt = 1, .bclk_freq = BCLK_100MHZ, + .cst_limit = CST_LIMIT_GMT, }; static const struct platform_features knl_features = { .has_msr_misc_pwr_mgmt = 1, .bclk_freq = BCLK_100MHZ, + .cst_limit = CST_LIMIT_KNL, }; static const struct platform_features default_features = { @@ -2704,6 +2745,50 @@ int icx_pkg_cstate_limits[16] = PCLRSV, PCLRSV }; +void probe_cst_limit(void) +{ + unsigned long long msr; + int *pkg_cstate_limits; + + if (!do_nhm_platform_info) + return; + + switch (platform->cst_limit) { + case CST_LIMIT_NHM: + pkg_cstate_limits = nhm_pkg_cstate_limits; + break; + case CST_LIMIT_SNB: + pkg_cstate_limits = snb_pkg_cstate_limits; + break; + case CST_LIMIT_HSW: + pkg_cstate_limits = hsw_pkg_cstate_limits; + break; + case CST_LIMIT_SKX: + pkg_cstate_limits = skx_pkg_cstate_limits; + break; + case CST_LIMIT_ICX: + pkg_cstate_limits = icx_pkg_cstate_limits; + break; + case CST_LIMIT_SLV: + pkg_cstate_limits = slv_pkg_cstate_limits; + break; + case CST_LIMIT_AMT: + pkg_cstate_limits = amt_pkg_cstate_limits; + break; + case CST_LIMIT_KNL: + pkg_cstate_limits = phi_pkg_cstate_limits; + break; + case CST_LIMIT_GMT: + pkg_cstate_limits = glm_pkg_cstate_limits; + break; + default: + return; + } + + get_msr(base_cpu, MSR_PKG_CST_CONFIG_CONTROL, &msr); + pkg_cstate_limit = pkg_cstate_limits[msr & 0xF]; +} + static void calculate_tsc_tweak() { tsc_tweak = base_hz / tsc_hz; @@ -4006,15 +4091,9 @@ void probe_bclk(void) * MSR_PKG_C6_RESIDENCY 0x000003f9 * MSR_CORE_C3_RESIDENCY 0x000003fc * MSR_CORE_C6_RESIDENCY 0x000003fd - * - * Side effect: - * sets global pkg_cstate_limit to decode MSR_PKG_CST_CONFIG_CONTROL */ int probe_nhm_msrs(unsigned int family, unsigned int model) { - unsigned long long msr; - int *pkg_cstate_limits; - if (!genuine_intel) return 0; @@ -4024,14 +4103,10 @@ int probe_nhm_msrs(unsigned int family, unsigned int model) switch (model) { case INTEL_FAM6_NEHALEM: /* Core i7 and i5 Processor - Clarksfield, Lynnfield, Jasper Forest */ case INTEL_FAM6_NEHALEM_EX: /* Nehalem-EX Xeon - Beckton */ - pkg_cstate_limits = nhm_pkg_cstate_limits; - break; case INTEL_FAM6_SANDYBRIDGE: /* SNB */ case INTEL_FAM6_SANDYBRIDGE_X: /* SNB Xeon */ case INTEL_FAM6_IVYBRIDGE: /* IVB */ case INTEL_FAM6_IVYBRIDGE_X: /* IVB Xeon */ - pkg_cstate_limits = snb_pkg_cstate_limits; - break; case INTEL_FAM6_HASWELL: /* HSW */ case INTEL_FAM6_HASWELL_G: /* HSW */ case INTEL_FAM6_HASWELL_X: /* HSX */ @@ -4041,38 +4116,22 @@ int probe_nhm_msrs(unsigned int family, unsigned int model) case INTEL_FAM6_BROADWELL_X: /* BDX */ case INTEL_FAM6_SKYLAKE_L: /* SKL */ case INTEL_FAM6_CANNONLAKE_L: /* CNL */ - pkg_cstate_limits = hsw_pkg_cstate_limits; - break; case INTEL_FAM6_SKYLAKE_X: /* SKX */ case INTEL_FAM6_SAPPHIRERAPIDS_X: /* SPR */ - pkg_cstate_limits = skx_pkg_cstate_limits; - break; case INTEL_FAM6_ICELAKE_X: /* ICX */ - pkg_cstate_limits = icx_pkg_cstate_limits; - break; case INTEL_FAM6_ATOM_SILVERMONT: /* BYT */ - /* FALLTHRU */ case INTEL_FAM6_ATOM_SILVERMONT_D: /* AVN */ - pkg_cstate_limits = slv_pkg_cstate_limits; - break; case INTEL_FAM6_ATOM_AIRMONT: /* AMT */ - pkg_cstate_limits = amt_pkg_cstate_limits; - break; case INTEL_FAM6_XEON_PHI_KNL: /* PHI */ - pkg_cstate_limits = phi_pkg_cstate_limits; - break; case INTEL_FAM6_ATOM_GOLDMONT: /* BXT */ case INTEL_FAM6_ATOM_GOLDMONT_PLUS: case INTEL_FAM6_ATOM_GOLDMONT_D: /* DNV */ case INTEL_FAM6_ATOM_TREMONT: /* EHL */ case INTEL_FAM6_ATOM_TREMONT_D: /* JVL */ - pkg_cstate_limits = glm_pkg_cstate_limits; break; default: return 0; } - get_msr(base_cpu, MSR_PKG_CST_CONFIG_CONTROL, &msr); - pkg_cstate_limit = pkg_cstate_limits[msr & 0xF]; return 1; } @@ -5964,6 +6023,7 @@ void process_cpuid() BIC_PRESENT(BIC_IRQ); BIC_PRESENT(BIC_TSC_MHz); + probe_cst_limit(); if (probe_nhm_msrs(family, model)) { do_nhm_platform_info = 1; BIC_PRESENT(BIC_CPU_c1); -- cgit v1.2.3 From fcfa1ce074ab76272639961d4d7900b91657a8d5 Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Fri, 25 Aug 2023 16:52:23 +0800 Subject: tools/power/turbostat: Abstract Nehalem MSRs support MSR_PLATFORM_INFO, MSR_IA32_TEMPERATURE_TARGET, MSR_SMI_COUNT, MSR_PKG_CST_CONFIG_CONTROL, and the TRL MSRs are always available for platforms since Nehalem. Support for these msrs can be described altogether. Abstract the support for these MSRs. Delete probe_nhm_msrs() CPU model check. Signed-off-by: Zhang Rui Reviewed-by: Len Brown --- tools/power/x86/turbostat/turbostat.c | 101 ++++++++++++---------------------- 1 file changed, 34 insertions(+), 67 deletions(-) diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c index bcad9332a3b2..bc221e800aec 100644 --- a/tools/power/x86/turbostat/turbostat.c +++ b/tools/power/x86/turbostat/turbostat.c @@ -237,7 +237,6 @@ unsigned int authentic_amd; unsigned int hygon_genuine; unsigned int max_level, max_extended_level; unsigned int has_invariant_tsc; -unsigned int do_nhm_platform_info; unsigned int aperf_mperf_multiplier = 1; double bclk; double base_hz; @@ -286,6 +285,7 @@ int get_msr(int cpu, off_t offset, unsigned long long *msr); struct platform_features { bool has_msr_misc_feature_control; /* MSR_MISC_FEATURE_CONTROL */ bool has_msr_misc_pwr_mgmt; /* MSR_MISC_PWR_MGMT */ + bool has_nhm_msrs; /* MSR_PLATFORM_INFO, MSR_IA32_TEMPERATURE_TARGET, MSR_SMI_COUNT, MSR_PKG_CST_CONFIG_CONTROL, TRL MSRs */ int bclk_freq; /* CPU base clock */ int cst_limit; /* MSR_PKG_CST_CONFIG_CONTROL */ }; @@ -342,12 +342,14 @@ enum package_cstate_limit { static const struct platform_features nhm_features = { .has_msr_misc_pwr_mgmt = 1, + .has_nhm_msrs = 1, .bclk_freq = BCLK_133MHZ, .cst_limit = CST_LIMIT_NHM, }; static const struct platform_features nhx_features = { .has_msr_misc_pwr_mgmt = 1, + .has_nhm_msrs = 1, .bclk_freq = BCLK_133MHZ, .cst_limit = CST_LIMIT_NHM, }; @@ -355,6 +357,7 @@ static const struct platform_features nhx_features = { static const struct platform_features snb_features = { .has_msr_misc_feature_control = 1, .has_msr_misc_pwr_mgmt = 1, + .has_nhm_msrs = 1, .bclk_freq = BCLK_100MHZ, .cst_limit = CST_LIMIT_SNB, }; @@ -362,6 +365,7 @@ static const struct platform_features snb_features = { static const struct platform_features snx_features = { .has_msr_misc_feature_control = 1, .has_msr_misc_pwr_mgmt = 1, + .has_nhm_msrs = 1, .bclk_freq = BCLK_100MHZ, .cst_limit = CST_LIMIT_SNB, }; @@ -369,6 +373,7 @@ static const struct platform_features snx_features = { static const struct platform_features ivb_features = { .has_msr_misc_feature_control = 1, .has_msr_misc_pwr_mgmt = 1, + .has_nhm_msrs = 1, .bclk_freq = BCLK_100MHZ, .cst_limit = CST_LIMIT_SNB, }; @@ -376,6 +381,7 @@ static const struct platform_features ivb_features = { static const struct platform_features ivx_features = { .has_msr_misc_feature_control = 1, .has_msr_misc_pwr_mgmt = 1, + .has_nhm_msrs = 1, .bclk_freq = BCLK_100MHZ, .cst_limit = CST_LIMIT_SNB, }; @@ -383,6 +389,7 @@ static const struct platform_features ivx_features = { static const struct platform_features hsw_features = { .has_msr_misc_feature_control = 1, .has_msr_misc_pwr_mgmt = 1, + .has_nhm_msrs = 1, .bclk_freq = BCLK_100MHZ, .cst_limit = CST_LIMIT_HSW, }; @@ -390,6 +397,7 @@ static const struct platform_features hsw_features = { static const struct platform_features hsx_features = { .has_msr_misc_feature_control = 1, .has_msr_misc_pwr_mgmt = 1, + .has_nhm_msrs = 1, .bclk_freq = BCLK_100MHZ, .cst_limit = CST_LIMIT_HSW, }; @@ -397,6 +405,7 @@ static const struct platform_features hsx_features = { static const struct platform_features hswl_features = { .has_msr_misc_feature_control = 1, .has_msr_misc_pwr_mgmt = 1, + .has_nhm_msrs = 1, .bclk_freq = BCLK_100MHZ, .cst_limit = CST_LIMIT_HSW, }; @@ -404,6 +413,7 @@ static const struct platform_features hswl_features = { static const struct platform_features hswg_features = { .has_msr_misc_feature_control = 1, .has_msr_misc_pwr_mgmt = 1, + .has_nhm_msrs = 1, .bclk_freq = BCLK_100MHZ, .cst_limit = CST_LIMIT_HSW, }; @@ -411,6 +421,7 @@ static const struct platform_features hswg_features = { static const struct platform_features bdw_features = { .has_msr_misc_feature_control = 1, .has_msr_misc_pwr_mgmt = 1, + .has_nhm_msrs = 1, .bclk_freq = BCLK_100MHZ, .cst_limit = CST_LIMIT_HSW, }; @@ -418,6 +429,7 @@ static const struct platform_features bdw_features = { static const struct platform_features bdwg_features = { .has_msr_misc_feature_control = 1, .has_msr_misc_pwr_mgmt = 1, + .has_nhm_msrs = 1, .bclk_freq = BCLK_100MHZ, .cst_limit = CST_LIMIT_HSW, }; @@ -425,6 +437,7 @@ static const struct platform_features bdwg_features = { static const struct platform_features bdx_features = { .has_msr_misc_feature_control = 1, .has_msr_misc_pwr_mgmt = 1, + .has_nhm_msrs = 1, .bclk_freq = BCLK_100MHZ, .cst_limit = CST_LIMIT_HSW, }; @@ -432,6 +445,7 @@ static const struct platform_features bdx_features = { static const struct platform_features skl_features = { .has_msr_misc_feature_control = 1, .has_msr_misc_pwr_mgmt = 1, + .has_nhm_msrs = 1, .bclk_freq = BCLK_100MHZ, .cst_limit = CST_LIMIT_HSW, }; @@ -439,6 +453,7 @@ static const struct platform_features skl_features = { static const struct platform_features cnl_features = { .has_msr_misc_feature_control = 1, .has_msr_misc_pwr_mgmt = 1, + .has_nhm_msrs = 1, .bclk_freq = BCLK_100MHZ, .cst_limit = CST_LIMIT_HSW, }; @@ -446,6 +461,7 @@ static const struct platform_features cnl_features = { static const struct platform_features skx_features = { .has_msr_misc_feature_control = 1, .has_msr_misc_pwr_mgmt = 1, + .has_nhm_msrs = 1, .bclk_freq = BCLK_100MHZ, .cst_limit = CST_LIMIT_SKX, }; @@ -453,6 +469,7 @@ static const struct platform_features skx_features = { static const struct platform_features icx_features = { .has_msr_misc_feature_control = 1, .has_msr_misc_pwr_mgmt = 1, + .has_nhm_msrs = 1, .bclk_freq = BCLK_100MHZ, .cst_limit = CST_LIMIT_ICX, }; @@ -460,58 +477,68 @@ static const struct platform_features icx_features = { static const struct platform_features spr_features = { .has_msr_misc_feature_control = 1, .has_msr_misc_pwr_mgmt = 1, + .has_nhm_msrs = 1, .bclk_freq = BCLK_100MHZ, .cst_limit = CST_LIMIT_SKX, }; static const struct platform_features slv_features = { + .has_nhm_msrs = 1, .bclk_freq = BCLK_SLV, .cst_limit = CST_LIMIT_SLV, }; static const struct platform_features slvd_features = { .has_msr_misc_pwr_mgmt = 1, + .has_nhm_msrs = 1, .bclk_freq = BCLK_SLV, .cst_limit = CST_LIMIT_SLV, }; static const struct platform_features amt_features = { + .has_nhm_msrs = 1, .bclk_freq = BCLK_133MHZ, .cst_limit = CST_LIMIT_AMT, }; static const struct platform_features gmt_features = { .has_msr_misc_pwr_mgmt = 1, + .has_nhm_msrs = 1, .bclk_freq = BCLK_100MHZ, .cst_limit = CST_LIMIT_GMT, }; static const struct platform_features gmtd_features = { .has_msr_misc_pwr_mgmt = 1, + .has_nhm_msrs = 1, .bclk_freq = BCLK_100MHZ, .cst_limit = CST_LIMIT_GMT, }; static const struct platform_features gmtp_features = { .has_msr_misc_pwr_mgmt = 1, + .has_nhm_msrs = 1, .bclk_freq = BCLK_100MHZ, .cst_limit = CST_LIMIT_GMT, }; static const struct platform_features tmt_features = { .has_msr_misc_pwr_mgmt = 1, + .has_nhm_msrs = 1, .bclk_freq = BCLK_100MHZ, .cst_limit = CST_LIMIT_GMT, }; static const struct platform_features tmtd_features = { .has_msr_misc_pwr_mgmt = 1, + .has_nhm_msrs = 1, .bclk_freq = BCLK_100MHZ, .cst_limit = CST_LIMIT_GMT, }; static const struct platform_features knl_features = { .has_msr_misc_pwr_mgmt = 1, + .has_nhm_msrs = 1, .bclk_freq = BCLK_100MHZ, .cst_limit = CST_LIMIT_KNL, }; @@ -2750,7 +2777,7 @@ void probe_cst_limit(void) unsigned long long msr; int *pkg_cstate_limits; - if (!do_nhm_platform_info) + if (!platform->has_nhm_msrs) return; switch (platform->cst_limit) { @@ -4058,7 +4085,7 @@ void probe_bclk(void) unsigned long long msr; unsigned int base_ratio; - if (!do_nhm_platform_info) + if (!platform->has_nhm_msrs) return; if (platform->bclk_freq == BCLK_100MHZ) @@ -4077,65 +4104,6 @@ void probe_bclk(void) has_base_hz = 1; } -/* - * NHM adds support for additional MSRs: - * - * MSR_SMI_COUNT 0x00000034 - * - * MSR_PLATFORM_INFO 0x000000ce - * MSR_PKG_CST_CONFIG_CONTROL 0x000000e2 - * - * MSR_MISC_PWR_MGMT 0x000001aa - * - * MSR_PKG_C3_RESIDENCY 0x000003f8 - * MSR_PKG_C6_RESIDENCY 0x000003f9 - * MSR_CORE_C3_RESIDENCY 0x000003fc - * MSR_CORE_C6_RESIDENCY 0x000003fd - */ -int probe_nhm_msrs(unsigned int family, unsigned int model) -{ - if (!genuine_intel) - return 0; - - if (family != 6) - return 0; - - switch (model) { - case INTEL_FAM6_NEHALEM: /* Core i7 and i5 Processor - Clarksfield, Lynnfield, Jasper Forest */ - case INTEL_FAM6_NEHALEM_EX: /* Nehalem-EX Xeon - Beckton */ - case INTEL_FAM6_SANDYBRIDGE: /* SNB */ - case INTEL_FAM6_SANDYBRIDGE_X: /* SNB Xeon */ - case INTEL_FAM6_IVYBRIDGE: /* IVB */ - case INTEL_FAM6_IVYBRIDGE_X: /* IVB Xeon */ - case INTEL_FAM6_HASWELL: /* HSW */ - case INTEL_FAM6_HASWELL_G: /* HSW */ - case INTEL_FAM6_HASWELL_X: /* HSX */ - case INTEL_FAM6_HASWELL_L: /* HSW */ - case INTEL_FAM6_BROADWELL: /* BDW */ - case INTEL_FAM6_BROADWELL_G: /* BDW */ - case INTEL_FAM6_BROADWELL_X: /* BDX */ - case INTEL_FAM6_SKYLAKE_L: /* SKL */ - case INTEL_FAM6_CANNONLAKE_L: /* CNL */ - case INTEL_FAM6_SKYLAKE_X: /* SKX */ - case INTEL_FAM6_SAPPHIRERAPIDS_X: /* SPR */ - case INTEL_FAM6_ICELAKE_X: /* ICX */ - case INTEL_FAM6_ATOM_SILVERMONT: /* BYT */ - case INTEL_FAM6_ATOM_SILVERMONT_D: /* AVN */ - case INTEL_FAM6_ATOM_AIRMONT: /* AMT */ - case INTEL_FAM6_XEON_PHI_KNL: /* PHI */ - case INTEL_FAM6_ATOM_GOLDMONT: /* BXT */ - case INTEL_FAM6_ATOM_GOLDMONT_PLUS: - case INTEL_FAM6_ATOM_GOLDMONT_D: /* DNV */ - case INTEL_FAM6_ATOM_TREMONT: /* EHL */ - case INTEL_FAM6_ATOM_TREMONT_D: /* JVL */ - break; - default: - return 0; - } - - return 1; -} - /* * SLV client has support for unique MSRs: * @@ -4461,7 +4429,7 @@ static void dump_turbo_ratio_info(unsigned int family, unsigned int model) static void dump_cstate_pstate_config_info(unsigned int family, unsigned int model) { - if (!do_nhm_platform_info) + if (!platform->has_nhm_msrs) return; dump_nhm_platform_info(); @@ -5606,7 +5574,7 @@ int set_temperature_target(struct thread_data *t, struct core_data *c, struct pk } /* Temperature Target MSR is Nehalem and newer only */ - if (!do_nhm_platform_info) + if (!platform->has_nhm_msrs) goto guess; if (get_msr(base_cpu, MSR_IA32_TEMPERATURE_TARGET, &msr)) @@ -5697,7 +5665,7 @@ void decode_misc_pwr_mgmt_msr(void) { unsigned long long msr; - if (!do_nhm_platform_info) + if (!platform->has_nhm_msrs) return; if (!platform->has_msr_misc_pwr_mgmt) @@ -6024,8 +5992,7 @@ void process_cpuid() BIC_PRESENT(BIC_TSC_MHz); probe_cst_limit(); - if (probe_nhm_msrs(family, model)) { - do_nhm_platform_info = 1; + if (platform->has_nhm_msrs) { BIC_PRESENT(BIC_CPU_c1); BIC_PRESENT(BIC_CPU_c3); BIC_PRESENT(BIC_CPU_c6); -- cgit v1.2.3 From c2c25e85df316a624e4a8ee85d65ea29265f486d Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Mon, 27 Mar 2023 14:57:06 +0800 Subject: tools/power/turbostat: Remove a redundant check Platforms with has_msr_misc_pwr_mgmt set is a subset of platforms with has_nhm_msrs set. Thus remove the redudant check for platform->has_nhm_msrs. Signed-off-by: Zhang Rui Reviewed-by: Len Brown --- tools/power/x86/turbostat/turbostat.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c index bc221e800aec..4eb10491f714 100644 --- a/tools/power/x86/turbostat/turbostat.c +++ b/tools/power/x86/turbostat/turbostat.c @@ -5665,9 +5665,6 @@ void decode_misc_pwr_mgmt_msr(void) { unsigned long long msr; - if (!platform->has_nhm_msrs) - return; - if (!platform->has_msr_misc_pwr_mgmt) return; -- cgit v1.2.3 From 8b7199c0855e3b22532a21aaaed78e699431e4e5 Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Mon, 27 Mar 2023 14:58:35 +0800 Subject: tools/power/turbostat: Rename some functions Rename dump_nhm_platform_info() and dump_nhm_cst_cfg() to dump_platform_info() and dump_cst_cfg() because these MSRs' behavior is consistent when they're available. Signed-off-by: Zhang Rui Reviewed-by: Len Brown --- tools/power/x86/turbostat/turbostat.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c index 4eb10491f714..654ae1ce130c 100644 --- a/tools/power/x86/turbostat/turbostat.c +++ b/tools/power/x86/turbostat/turbostat.c @@ -2823,7 +2823,7 @@ static void calculate_tsc_tweak() void prewake_cstate_probe(unsigned int family, unsigned int model); -static void dump_nhm_platform_info(void) +static void dump_platform_info(void) { unsigned long long msr; unsigned int ratio; @@ -3059,7 +3059,7 @@ static void dump_knl_turbo_ratio_limits(void) ratio[i], bclk, ratio[i] * bclk, cores[i]); } -static void dump_nhm_cst_cfg(void) +static void dump_cst_cfg(void) { unsigned long long msr; @@ -4432,9 +4432,9 @@ static void dump_cstate_pstate_config_info(unsigned int family, unsigned int mod if (!platform->has_nhm_msrs) return; - dump_nhm_platform_info(); + dump_platform_info(); dump_turbo_ratio_info(family, model); - dump_nhm_cst_cfg(); + dump_cst_cfg(); } static int read_sysfs_int(char *path) -- cgit v1.2.3 From 10d85d85ab4f3ae7faca4450ce7b0a166fd396f0 Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Fri, 8 Sep 2023 23:16:00 +0800 Subject: tools/power/turbostat: Abstract Turbo Ratio Limit MSRs support Abstract the support for MSR_TURBO_RATIO_LIMIT, MSR_TRUBO_RATIO_LIMIT1, MSR_TURBO_RATIO_LIMIT2, MSR_SECONDARY_TURBO_RATIO_LIMIT, MSR_ATOM_CORE_RATIOS and MSR_ATOM_CORE_TURBO_RATIOS. Delete has_turbo_ratio_group_limits(), has_turbo_ratio_limit(), has_atom_turbo_ratio_limit(), has_ivt_turbo_ratio_limit(), has_hsw_turbo_ratio_limit(), has_knl_turbo_ratio_limit() and has_glm_turbo_ratio_limit() CPU model checks. Signed-off-by: Zhang Rui Reviewed-by: Len Brown --- tools/power/x86/turbostat/turbostat.c | 171 +++++++++------------------------- 1 file changed, 46 insertions(+), 125 deletions(-) diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c index 654ae1ce130c..b6c53ec740d3 100644 --- a/tools/power/x86/turbostat/turbostat.c +++ b/tools/power/x86/turbostat/turbostat.c @@ -288,6 +288,7 @@ struct platform_features { bool has_nhm_msrs; /* MSR_PLATFORM_INFO, MSR_IA32_TEMPERATURE_TARGET, MSR_SMI_COUNT, MSR_PKG_CST_CONFIG_CONTROL, TRL MSRs */ int bclk_freq; /* CPU base clock */ int cst_limit; /* MSR_PKG_CST_CONFIG_CONTROL */ + int trl_msrs; /* MSR_TURBO_RATIO_LIMIT/LIMIT1/LIMIT2/SECONDARY, Atom TRL MSRs */ }; struct platform_data { @@ -340,11 +341,22 @@ enum package_cstate_limit { CST_LIMIT_GMT, }; +/* For Turbo Ratio Limit MSRs */ +enum turbo_ratio_limit_msrs { + TRL_BASE = BIT(0), + TRL_LIMIT1 = BIT(1), + TRL_LIMIT2 = BIT(2), + TRL_ATOM = BIT(3), + TRL_KNL = BIT(4), + TRL_CORECOUNT = BIT(5), +}; + static const struct platform_features nhm_features = { .has_msr_misc_pwr_mgmt = 1, .has_nhm_msrs = 1, .bclk_freq = BCLK_133MHZ, .cst_limit = CST_LIMIT_NHM, + .trl_msrs = TRL_BASE, }; static const struct platform_features nhx_features = { @@ -360,6 +372,7 @@ static const struct platform_features snb_features = { .has_nhm_msrs = 1, .bclk_freq = BCLK_100MHZ, .cst_limit = CST_LIMIT_SNB, + .trl_msrs = TRL_BASE, }; static const struct platform_features snx_features = { @@ -368,6 +381,7 @@ static const struct platform_features snx_features = { .has_nhm_msrs = 1, .bclk_freq = BCLK_100MHZ, .cst_limit = CST_LIMIT_SNB, + .trl_msrs = TRL_BASE, }; static const struct platform_features ivb_features = { @@ -376,6 +390,7 @@ static const struct platform_features ivb_features = { .has_nhm_msrs = 1, .bclk_freq = BCLK_100MHZ, .cst_limit = CST_LIMIT_SNB, + .trl_msrs = TRL_BASE, }; static const struct platform_features ivx_features = { @@ -384,6 +399,7 @@ static const struct platform_features ivx_features = { .has_nhm_msrs = 1, .bclk_freq = BCLK_100MHZ, .cst_limit = CST_LIMIT_SNB, + .trl_msrs = TRL_BASE | TRL_LIMIT1, }; static const struct platform_features hsw_features = { @@ -392,6 +408,7 @@ static const struct platform_features hsw_features = { .has_nhm_msrs = 1, .bclk_freq = BCLK_100MHZ, .cst_limit = CST_LIMIT_HSW, + .trl_msrs = TRL_BASE, }; static const struct platform_features hsx_features = { @@ -400,6 +417,7 @@ static const struct platform_features hsx_features = { .has_nhm_msrs = 1, .bclk_freq = BCLK_100MHZ, .cst_limit = CST_LIMIT_HSW, + .trl_msrs = TRL_BASE | TRL_LIMIT1 | TRL_LIMIT2, }; static const struct platform_features hswl_features = { @@ -408,6 +426,7 @@ static const struct platform_features hswl_features = { .has_nhm_msrs = 1, .bclk_freq = BCLK_100MHZ, .cst_limit = CST_LIMIT_HSW, + .trl_msrs = TRL_BASE, }; static const struct platform_features hswg_features = { @@ -416,6 +435,7 @@ static const struct platform_features hswg_features = { .has_nhm_msrs = 1, .bclk_freq = BCLK_100MHZ, .cst_limit = CST_LIMIT_HSW, + .trl_msrs = TRL_BASE, }; static const struct platform_features bdw_features = { @@ -424,6 +444,7 @@ static const struct platform_features bdw_features = { .has_nhm_msrs = 1, .bclk_freq = BCLK_100MHZ, .cst_limit = CST_LIMIT_HSW, + .trl_msrs = TRL_BASE, }; static const struct platform_features bdwg_features = { @@ -432,6 +453,7 @@ static const struct platform_features bdwg_features = { .has_nhm_msrs = 1, .bclk_freq = BCLK_100MHZ, .cst_limit = CST_LIMIT_HSW, + .trl_msrs = TRL_BASE, }; static const struct platform_features bdx_features = { @@ -440,6 +462,7 @@ static const struct platform_features bdx_features = { .has_nhm_msrs = 1, .bclk_freq = BCLK_100MHZ, .cst_limit = CST_LIMIT_HSW, + .trl_msrs = TRL_BASE, }; static const struct platform_features skl_features = { @@ -448,6 +471,7 @@ static const struct platform_features skl_features = { .has_nhm_msrs = 1, .bclk_freq = BCLK_100MHZ, .cst_limit = CST_LIMIT_HSW, + .trl_msrs = TRL_BASE, }; static const struct platform_features cnl_features = { @@ -456,6 +480,7 @@ static const struct platform_features cnl_features = { .has_nhm_msrs = 1, .bclk_freq = BCLK_100MHZ, .cst_limit = CST_LIMIT_HSW, + .trl_msrs = TRL_BASE, }; static const struct platform_features skx_features = { @@ -464,6 +489,7 @@ static const struct platform_features skx_features = { .has_nhm_msrs = 1, .bclk_freq = BCLK_100MHZ, .cst_limit = CST_LIMIT_SKX, + .trl_msrs = TRL_BASE | TRL_CORECOUNT, }; static const struct platform_features icx_features = { @@ -472,6 +498,7 @@ static const struct platform_features icx_features = { .has_nhm_msrs = 1, .bclk_freq = BCLK_100MHZ, .cst_limit = CST_LIMIT_ICX, + .trl_msrs = TRL_BASE | TRL_CORECOUNT, }; static const struct platform_features spr_features = { @@ -480,12 +507,14 @@ static const struct platform_features spr_features = { .has_nhm_msrs = 1, .bclk_freq = BCLK_100MHZ, .cst_limit = CST_LIMIT_SKX, + .trl_msrs = TRL_BASE | TRL_CORECOUNT, }; static const struct platform_features slv_features = { .has_nhm_msrs = 1, .bclk_freq = BCLK_SLV, .cst_limit = CST_LIMIT_SLV, + .trl_msrs = TRL_ATOM, }; static const struct platform_features slvd_features = { @@ -493,12 +522,14 @@ static const struct platform_features slvd_features = { .has_nhm_msrs = 1, .bclk_freq = BCLK_SLV, .cst_limit = CST_LIMIT_SLV, + .trl_msrs = TRL_BASE, }; static const struct platform_features amt_features = { .has_nhm_msrs = 1, .bclk_freq = BCLK_133MHZ, .cst_limit = CST_LIMIT_AMT, + .trl_msrs = TRL_BASE, }; static const struct platform_features gmt_features = { @@ -506,6 +537,7 @@ static const struct platform_features gmt_features = { .has_nhm_msrs = 1, .bclk_freq = BCLK_100MHZ, .cst_limit = CST_LIMIT_GMT, + .trl_msrs = TRL_BASE | TRL_CORECOUNT, }; static const struct platform_features gmtd_features = { @@ -513,6 +545,7 @@ static const struct platform_features gmtd_features = { .has_nhm_msrs = 1, .bclk_freq = BCLK_100MHZ, .cst_limit = CST_LIMIT_GMT, + .trl_msrs = TRL_BASE | TRL_CORECOUNT, }; static const struct platform_features gmtp_features = { @@ -520,6 +553,7 @@ static const struct platform_features gmtp_features = { .has_nhm_msrs = 1, .bclk_freq = BCLK_100MHZ, .cst_limit = CST_LIMIT_GMT, + .trl_msrs = TRL_BASE, }; static const struct platform_features tmt_features = { @@ -527,6 +561,7 @@ static const struct platform_features tmt_features = { .has_nhm_msrs = 1, .bclk_freq = BCLK_100MHZ, .cst_limit = CST_LIMIT_GMT, + .trl_msrs = TRL_BASE, }; static const struct platform_features tmtd_features = { @@ -534,6 +569,7 @@ static const struct platform_features tmtd_features = { .has_nhm_msrs = 1, .bclk_freq = BCLK_100MHZ, .cst_limit = CST_LIMIT_GMT, + .trl_msrs = TRL_BASE | TRL_CORECOUNT, }; static const struct platform_features knl_features = { @@ -541,6 +577,7 @@ static const struct platform_features knl_features = { .has_nhm_msrs = 1, .bclk_freq = BCLK_100MHZ, .cst_limit = CST_LIMIT_KNL, + .trl_msrs = TRL_KNL, }; static const struct platform_features default_features = { @@ -2911,29 +2948,7 @@ static void dump_ivt_turbo_ratio_limits(void) return; } -int has_turbo_ratio_group_limits(int family, int model) -{ - - if (!genuine_intel) - return 0; - - if (family != 6) - return 0; - - switch (model) { - case INTEL_FAM6_ATOM_GOLDMONT: - case INTEL_FAM6_SKYLAKE_X: - case INTEL_FAM6_ICELAKE_X: - case INTEL_FAM6_SAPPHIRERAPIDS_X: - case INTEL_FAM6_ATOM_GOLDMONT_D: - case INTEL_FAM6_ATOM_TREMONT_D: - return 1; - default: - return 0; - } -} - -static void dump_turbo_ratio_limits(int trl_msr_offset, int family, int model) +static void dump_turbo_ratio_limits(int trl_msr_offset) { unsigned long long msr, core_counts; int shift; @@ -2942,7 +2957,7 @@ static void dump_turbo_ratio_limits(int trl_msr_offset, int family, int model) fprintf(outf, "cpu%d: MSR_%sTURBO_RATIO_LIMIT: 0x%08llx\n", base_cpu, trl_msr_offset == MSR_SECONDARY_TURBO_RATIO_LIMIT ? "SECONDARY_" : "", msr); - if (has_turbo_ratio_group_limits(family, model)) { + if (platform->trl_msrs & TRL_CORECOUNT) { get_msr(base_cpu, MSR_TURBO_RATIO_LIMIT1, &core_counts); fprintf(outf, "cpu%d: MSR_TURBO_RATIO_LIMIT1: 0x%08llx\n", base_cpu, core_counts); } else { @@ -4236,100 +4251,6 @@ int is_jvl(unsigned int family, unsigned int model) return 0; } -int has_turbo_ratio_limit(unsigned int family, unsigned int model) -{ - if (has_slv_msrs(family, model)) - return 0; - - if (family != 6) - return 0; - - switch (model) { - /* Nehalem compatible, but do not include turbo-ratio limit support */ - case INTEL_FAM6_NEHALEM_EX: /* Nehalem-EX Xeon - Beckton */ - case INTEL_FAM6_XEON_PHI_KNL: /* PHI - Knights Landing (different MSR definition) */ - return 0; - default: - return 1; - } -} - -int has_atom_turbo_ratio_limit(unsigned int family, unsigned int model) -{ - if (has_slv_msrs(family, model)) - return 1; - - return 0; -} - -int has_ivt_turbo_ratio_limit(unsigned int family, unsigned int model) -{ - if (!genuine_intel) - return 0; - - if (family != 6) - return 0; - - switch (model) { - case INTEL_FAM6_IVYBRIDGE_X: /* IVB Xeon */ - case INTEL_FAM6_HASWELL_X: /* HSW Xeon */ - return 1; - default: - return 0; - } -} - -int has_hsw_turbo_ratio_limit(unsigned int family, unsigned int model) -{ - if (!genuine_intel) - return 0; - - if (family != 6) - return 0; - - switch (model) { - case INTEL_FAM6_HASWELL_X: /* HSW Xeon */ - return 1; - default: - return 0; - } -} - -int has_knl_turbo_ratio_limit(unsigned int family, unsigned int model) -{ - if (!genuine_intel) - return 0; - - if (family != 6) - return 0; - - switch (model) { - case INTEL_FAM6_XEON_PHI_KNL: /* Knights Landing */ - return 1; - default: - return 0; - } -} - -int has_glm_turbo_ratio_limit(unsigned int family, unsigned int model) -{ - if (!genuine_intel) - return 0; - - if (family != 6) - return 0; - - switch (model) { - case INTEL_FAM6_ATOM_GOLDMONT: - case INTEL_FAM6_SKYLAKE_X: - case INTEL_FAM6_ICELAKE_X: - case INTEL_FAM6_SAPPHIRERAPIDS_X: - return 1; - default: - return 0; - } -} - int has_config_tdp(unsigned int family, unsigned int model) { if (!genuine_intel) @@ -4404,23 +4325,23 @@ static void dump_turbo_ratio_info(unsigned int family, unsigned int model) if (!has_turbo) return; - if (has_hsw_turbo_ratio_limit(family, model)) + if (platform->trl_msrs & TRL_LIMIT2) dump_hsw_turbo_ratio_limits(); - if (has_ivt_turbo_ratio_limit(family, model)) + if (platform->trl_msrs & TRL_LIMIT1) dump_ivt_turbo_ratio_limits(); - if (has_turbo_ratio_limit(family, model)) { - dump_turbo_ratio_limits(MSR_TURBO_RATIO_LIMIT, family, model); + if (platform->trl_msrs & TRL_BASE) { + dump_turbo_ratio_limits(MSR_TURBO_RATIO_LIMIT); if (is_hybrid) - dump_turbo_ratio_limits(MSR_SECONDARY_TURBO_RATIO_LIMIT, family, model); + dump_turbo_ratio_limits(MSR_SECONDARY_TURBO_RATIO_LIMIT); } - if (has_atom_turbo_ratio_limit(family, model)) + if (platform->trl_msrs & TRL_ATOM) dump_atom_turbo_ratio_limits(); - if (has_knl_turbo_ratio_limit(family, model)) + if (platform->trl_msrs & TRL_KNL) dump_knl_turbo_ratio_limits(); if (has_config_tdp(family, model)) -- cgit v1.2.3 From a3943deaf98f713c819dd7e67af734d4ed4da030 Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Sun, 30 Jul 2023 13:54:25 +0800 Subject: tools/power/turbostat: Rename some TRL functions Rename dump_hsw_turbo_ratio_limits() and dump_ivt_turbo_ratio_limits() to dump_turbo_ratio_limit2() and dump_turbo_ratio_limit1() because they dump MSR_TURBO_RATIO_LIMIT1/LIMIT2, and the MSRs' behavior is consistent when they are available. Signed-off-by: Zhang Rui Reviewed-by: Len Brown --- tools/power/x86/turbostat/turbostat.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c index b6c53ec740d3..abcc055ea0e1 100644 --- a/tools/power/x86/turbostat/turbostat.c +++ b/tools/power/x86/turbostat/turbostat.c @@ -2886,7 +2886,7 @@ static void dump_platform_info(void) return; } -static void dump_hsw_turbo_ratio_limits(void) +static void dump_turbo_ratio_limit2(void) { unsigned long long msr; unsigned int ratio; @@ -2905,7 +2905,7 @@ static void dump_hsw_turbo_ratio_limits(void) return; } -static void dump_ivt_turbo_ratio_limits(void) +static void dump_turbo_ratio_limit1(void) { unsigned long long msr; unsigned int ratio; @@ -4326,10 +4326,10 @@ static void dump_turbo_ratio_info(unsigned int family, unsigned int model) return; if (platform->trl_msrs & TRL_LIMIT2) - dump_hsw_turbo_ratio_limits(); + dump_turbo_ratio_limit2(); if (platform->trl_msrs & TRL_LIMIT1) - dump_ivt_turbo_ratio_limits(); + dump_turbo_ratio_limit1(); if (platform->trl_msrs & TRL_BASE) { dump_turbo_ratio_limits(MSR_TURBO_RATIO_LIMIT); -- cgit v1.2.3 From a61c9cb478c0bf31a50d1829834e822e92876c95 Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Thu, 31 Aug 2023 14:19:46 +0800 Subject: tools/power/turbostat: Abstract Config TDP MSRs support Abstract the support for MSR_CONFIG_TDP_NOMINAL/LEVEL_1/LEVEL_2/CONTROL and MSR_TURBO_ACTIVATION_RATIO. Delete has_config_tdp() CPU model check. Signed-off-by: Zhang Rui Reviewed-by: Len Brown --- tools/power/x86/turbostat/turbostat.c | 54 +++++++++++++---------------------- 1 file changed, 20 insertions(+), 34 deletions(-) diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c index abcc055ea0e1..bb9d8c2605c8 100644 --- a/tools/power/x86/turbostat/turbostat.c +++ b/tools/power/x86/turbostat/turbostat.c @@ -286,6 +286,7 @@ struct platform_features { bool has_msr_misc_feature_control; /* MSR_MISC_FEATURE_CONTROL */ bool has_msr_misc_pwr_mgmt; /* MSR_MISC_PWR_MGMT */ bool has_nhm_msrs; /* MSR_PLATFORM_INFO, MSR_IA32_TEMPERATURE_TARGET, MSR_SMI_COUNT, MSR_PKG_CST_CONFIG_CONTROL, TRL MSRs */ + bool has_config_tdp; /* MSR_CONFIG_TDP_NOMINAL/LEVEL_1/LEVEL_2/CONTROL, MSR_TURBO_ACTIVATION_RATIO */ int bclk_freq; /* CPU base clock */ int cst_limit; /* MSR_PKG_CST_CONFIG_CONTROL */ int trl_msrs; /* MSR_TURBO_RATIO_LIMIT/LIMIT1/LIMIT2/SECONDARY, Atom TRL MSRs */ @@ -388,6 +389,7 @@ static const struct platform_features ivb_features = { .has_msr_misc_feature_control = 1, .has_msr_misc_pwr_mgmt = 1, .has_nhm_msrs = 1, + .has_config_tdp = 1, .bclk_freq = BCLK_100MHZ, .cst_limit = CST_LIMIT_SNB, .trl_msrs = TRL_BASE, @@ -406,6 +408,7 @@ static const struct platform_features hsw_features = { .has_msr_misc_feature_control = 1, .has_msr_misc_pwr_mgmt = 1, .has_nhm_msrs = 1, + .has_config_tdp = 1, .bclk_freq = BCLK_100MHZ, .cst_limit = CST_LIMIT_HSW, .trl_msrs = TRL_BASE, @@ -415,6 +418,7 @@ static const struct platform_features hsx_features = { .has_msr_misc_feature_control = 1, .has_msr_misc_pwr_mgmt = 1, .has_nhm_msrs = 1, + .has_config_tdp = 1, .bclk_freq = BCLK_100MHZ, .cst_limit = CST_LIMIT_HSW, .trl_msrs = TRL_BASE | TRL_LIMIT1 | TRL_LIMIT2, @@ -424,6 +428,7 @@ static const struct platform_features hswl_features = { .has_msr_misc_feature_control = 1, .has_msr_misc_pwr_mgmt = 1, .has_nhm_msrs = 1, + .has_config_tdp = 1, .bclk_freq = BCLK_100MHZ, .cst_limit = CST_LIMIT_HSW, .trl_msrs = TRL_BASE, @@ -433,6 +438,7 @@ static const struct platform_features hswg_features = { .has_msr_misc_feature_control = 1, .has_msr_misc_pwr_mgmt = 1, .has_nhm_msrs = 1, + .has_config_tdp = 1, .bclk_freq = BCLK_100MHZ, .cst_limit = CST_LIMIT_HSW, .trl_msrs = TRL_BASE, @@ -442,6 +448,7 @@ static const struct platform_features bdw_features = { .has_msr_misc_feature_control = 1, .has_msr_misc_pwr_mgmt = 1, .has_nhm_msrs = 1, + .has_config_tdp = 1, .bclk_freq = BCLK_100MHZ, .cst_limit = CST_LIMIT_HSW, .trl_msrs = TRL_BASE, @@ -451,6 +458,7 @@ static const struct platform_features bdwg_features = { .has_msr_misc_feature_control = 1, .has_msr_misc_pwr_mgmt = 1, .has_nhm_msrs = 1, + .has_config_tdp = 1, .bclk_freq = BCLK_100MHZ, .cst_limit = CST_LIMIT_HSW, .trl_msrs = TRL_BASE, @@ -460,6 +468,7 @@ static const struct platform_features bdx_features = { .has_msr_misc_feature_control = 1, .has_msr_misc_pwr_mgmt = 1, .has_nhm_msrs = 1, + .has_config_tdp = 1, .bclk_freq = BCLK_100MHZ, .cst_limit = CST_LIMIT_HSW, .trl_msrs = TRL_BASE, @@ -469,6 +478,7 @@ static const struct platform_features skl_features = { .has_msr_misc_feature_control = 1, .has_msr_misc_pwr_mgmt = 1, .has_nhm_msrs = 1, + .has_config_tdp = 1, .bclk_freq = BCLK_100MHZ, .cst_limit = CST_LIMIT_HSW, .trl_msrs = TRL_BASE, @@ -478,6 +488,7 @@ static const struct platform_features cnl_features = { .has_msr_misc_feature_control = 1, .has_msr_misc_pwr_mgmt = 1, .has_nhm_msrs = 1, + .has_config_tdp = 1, .bclk_freq = BCLK_100MHZ, .cst_limit = CST_LIMIT_HSW, .trl_msrs = TRL_BASE, @@ -487,6 +498,7 @@ static const struct platform_features skx_features = { .has_msr_misc_feature_control = 1, .has_msr_misc_pwr_mgmt = 1, .has_nhm_msrs = 1, + .has_config_tdp = 1, .bclk_freq = BCLK_100MHZ, .cst_limit = CST_LIMIT_SKX, .trl_msrs = TRL_BASE | TRL_CORECOUNT, @@ -496,6 +508,7 @@ static const struct platform_features icx_features = { .has_msr_misc_feature_control = 1, .has_msr_misc_pwr_mgmt = 1, .has_nhm_msrs = 1, + .has_config_tdp = 1, .bclk_freq = BCLK_100MHZ, .cst_limit = CST_LIMIT_ICX, .trl_msrs = TRL_BASE | TRL_CORECOUNT, @@ -505,6 +518,7 @@ static const struct platform_features spr_features = { .has_msr_misc_feature_control = 1, .has_msr_misc_pwr_mgmt = 1, .has_nhm_msrs = 1, + .has_config_tdp = 1, .bclk_freq = BCLK_100MHZ, .cst_limit = CST_LIMIT_SKX, .trl_msrs = TRL_BASE | TRL_CORECOUNT, @@ -575,6 +589,7 @@ static const struct platform_features tmtd_features = { static const struct platform_features knl_features = { .has_msr_misc_pwr_mgmt = 1, .has_nhm_msrs = 1, + .has_config_tdp = 1, .bclk_freq = BCLK_100MHZ, .cst_limit = CST_LIMIT_KNL, .trl_msrs = TRL_KNL, @@ -4251,35 +4266,6 @@ int is_jvl(unsigned int family, unsigned int model) return 0; } -int has_config_tdp(unsigned int family, unsigned int model) -{ - if (!genuine_intel) - return 0; - - if (family != 6) - return 0; - - switch (model) { - case INTEL_FAM6_IVYBRIDGE: /* IVB */ - case INTEL_FAM6_HASWELL: /* HSW */ - case INTEL_FAM6_HASWELL_X: /* HSX */ - case INTEL_FAM6_HASWELL_L: /* HSW */ - case INTEL_FAM6_HASWELL_G: /* HSW */ - case INTEL_FAM6_BROADWELL: /* BDW */ - case INTEL_FAM6_BROADWELL_G: /* BDW */ - case INTEL_FAM6_BROADWELL_X: /* BDX */ - case INTEL_FAM6_SKYLAKE_L: /* SKL */ - case INTEL_FAM6_CANNONLAKE_L: /* CNL */ - case INTEL_FAM6_SKYLAKE_X: /* SKX */ - case INTEL_FAM6_ICELAKE_X: /* ICX */ - case INTEL_FAM6_SAPPHIRERAPIDS_X: /* SPR */ - case INTEL_FAM6_XEON_PHI_KNL: /* Knights Landing */ - return 1; - default: - return 0; - } -} - /* * tcc_offset_bits: * 0: Tcc Offset not supported (Default) @@ -4320,7 +4306,7 @@ static void remove_underbar(char *s) *to = 0; } -static void dump_turbo_ratio_info(unsigned int family, unsigned int model) +static void dump_turbo_ratio_info(void) { if (!has_turbo) return; @@ -4344,17 +4330,17 @@ static void dump_turbo_ratio_info(unsigned int family, unsigned int model) if (platform->trl_msrs & TRL_KNL) dump_knl_turbo_ratio_limits(); - if (has_config_tdp(family, model)) + if (platform->has_config_tdp) dump_config_tdp(); } -static void dump_cstate_pstate_config_info(unsigned int family, unsigned int model) +static void dump_cstate_pstate_config_info(void) { if (!platform->has_nhm_msrs) return; dump_platform_info(); - dump_turbo_ratio_info(family, model); + dump_turbo_ratio_info(); dump_cst_cfg(); } @@ -6000,7 +5986,7 @@ void process_cpuid() check_tcc_offset(model); if (!quiet) - dump_cstate_pstate_config_info(family, model); + dump_cstate_pstate_config_info(); intel_uncore_frequency_probe(); if (!quiet) -- cgit v1.2.3 From d8e1623baa0b49aa90cf5801cfaac9e3d3aa1e19 Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Fri, 25 Aug 2023 23:04:44 +0800 Subject: tools/power/turbostat: Abstract TCC Offset bits support Abstract the support for different TCC Offset bits in MSR_IA32_TEMPERATURE_TARGET. Delete check_tcc_offset() CPU model check. Signed-off-by: Zhang Rui Reviewed-by: Len Brown --- tools/power/x86/turbostat/turbostat.c | 53 ++++++++--------------------------- 1 file changed, 12 insertions(+), 41 deletions(-) diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c index bb9d8c2605c8..c39beb4078da 100644 --- a/tools/power/x86/turbostat/turbostat.c +++ b/tools/power/x86/turbostat/turbostat.c @@ -256,7 +256,6 @@ unsigned int gfx_cur_mhz; unsigned int gfx_act_mhz; unsigned int tj_max; unsigned int tj_max_override; -int tcc_offset_bits; double rapl_power_units, rapl_time_units; double rapl_dram_energy_units, rapl_energy_units; double rapl_joule_counter_range; @@ -290,6 +289,7 @@ struct platform_features { int bclk_freq; /* CPU base clock */ int cst_limit; /* MSR_PKG_CST_CONFIG_CONTROL */ int trl_msrs; /* MSR_TURBO_RATIO_LIMIT/LIMIT1/LIMIT2/SECONDARY, Atom TRL MSRs */ + int tcc_offset_bits; /* TCC Offset bits in MSR_IA32_TEMPERATURE_TARGET */ }; struct platform_data { @@ -482,6 +482,7 @@ static const struct platform_features skl_features = { .bclk_freq = BCLK_100MHZ, .cst_limit = CST_LIMIT_HSW, .trl_msrs = TRL_BASE, + .tcc_offset_bits = 6, }; static const struct platform_features cnl_features = { @@ -492,6 +493,7 @@ static const struct platform_features cnl_features = { .bclk_freq = BCLK_100MHZ, .cst_limit = CST_LIMIT_HSW, .trl_msrs = TRL_BASE, + .tcc_offset_bits = 6, }; static const struct platform_features skx_features = { @@ -4266,33 +4268,6 @@ int is_jvl(unsigned int family, unsigned int model) return 0; } -/* - * tcc_offset_bits: - * 0: Tcc Offset not supported (Default) - * 6: Bit 29:24 of MSR_PLATFORM_INFO - * 4: Bit 27:24 of MSR_PLATFORM_INFO - */ -void check_tcc_offset(int model) -{ - unsigned long long msr; - - if (!genuine_intel) - return; - - switch (model) { - case INTEL_FAM6_SKYLAKE_L: - case INTEL_FAM6_CANNONLAKE_L: - if (!get_msr(base_cpu, MSR_PLATFORM_INFO, &msr)) { - msr = (msr >> 30) & 1; - if (msr) - tcc_offset_bits = 6; - } - return; - default: - return; - } -} - static void remove_underbar(char *s) { char *to = s; @@ -5490,20 +5465,18 @@ int set_temperature_target(struct thread_data *t, struct core_data *c, struct pk tcc_default = (msr >> 16) & 0xFF; if (!quiet) { - switch (tcc_offset_bits) { - case 4: - tcc_offset = (msr >> 24) & 0xF; - fprintf(outf, "cpu%d: MSR_IA32_TEMPERATURE_TARGET: 0x%08llx (%d C) (%d default - %d offset)\n", - cpu, msr, tcc_default - tcc_offset, tcc_default, tcc_offset); - break; - case 6: - tcc_offset = (msr >> 24) & 0x3F; + int bits = platform->tcc_offset_bits; + unsigned long long enabled = 0; + + if (bits && !get_msr(base_cpu, MSR_PLATFORM_INFO, &enabled)) + enabled = (enabled >> 30) & 1; + + if (bits && enabled) { + tcc_offset = (msr >> 24) & GENMASK(bits - 1, 0); fprintf(outf, "cpu%d: MSR_IA32_TEMPERATURE_TARGET: 0x%08llx (%d C) (%d default - %d offset)\n", cpu, msr, tcc_default - tcc_offset, tcc_default, tcc_offset); - break; - default: + } else { fprintf(outf, "cpu%d: MSR_IA32_TEMPERATURE_TARGET: 0x%08llx (%d C)\n", cpu, msr, tcc_default); - break; } } @@ -5983,8 +5956,6 @@ void process_cpuid() automatic_cstate_conversion_probe(family, model); prewake_cstate_probe(family, model); - check_tcc_offset(model); - if (!quiet) dump_cstate_pstate_config_info(); intel_uncore_frequency_probe(); -- cgit v1.2.3 From 0c057cf7a0e163bf9631b83c002b3a55691674c7 Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Sun, 30 Jul 2023 14:25:17 +0800 Subject: tools/power/turbostat: Abstract Perf Limit Reasons MSRs support Abstract the support for MSR_CORE/GFX/RING_PERF_LIMIT_REASONS MSRs. Delete perf_limit_reasons_probe() CPU model check. Signed-off-by: Zhang Rui Reviewed-by: Len Brown --- tools/power/x86/turbostat/turbostat.c | 44 ++++++++++++----------------------- 1 file changed, 15 insertions(+), 29 deletions(-) diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c index c39beb4078da..1207845340ad 100644 --- a/tools/power/x86/turbostat/turbostat.c +++ b/tools/power/x86/turbostat/turbostat.c @@ -259,11 +259,8 @@ unsigned int tj_max_override; double rapl_power_units, rapl_time_units; double rapl_dram_energy_units, rapl_energy_units; double rapl_joule_counter_range; -unsigned int do_core_perf_limit_reasons; unsigned int has_automatic_cstate_conversion; unsigned int dis_cstate_prewake; -unsigned int do_gfx_perf_limit_reasons; -unsigned int do_ring_perf_limit_reasons; unsigned int crystal_hz; unsigned long long tsc_hz; int base_cpu; @@ -289,6 +286,7 @@ struct platform_features { int bclk_freq; /* CPU base clock */ int cst_limit; /* MSR_PKG_CST_CONFIG_CONTROL */ int trl_msrs; /* MSR_TURBO_RATIO_LIMIT/LIMIT1/LIMIT2/SECONDARY, Atom TRL MSRs */ + int plr_msrs; /* MSR_CORE/GFX/RING_PERF_LIMIT_REASONS */ int tcc_offset_bits; /* TCC Offset bits in MSR_IA32_TEMPERATURE_TARGET */ }; @@ -352,6 +350,13 @@ enum turbo_ratio_limit_msrs { TRL_CORECOUNT = BIT(5), }; +/* For Perf Limit Reason MSRs */ +enum perf_limit_reason_msrs { + PLR_CORE = BIT(0), + PLR_GFX = BIT(1), + PLR_RING = BIT(2), +}; + static const struct platform_features nhm_features = { .has_msr_misc_pwr_mgmt = 1, .has_nhm_msrs = 1, @@ -412,6 +417,7 @@ static const struct platform_features hsw_features = { .bclk_freq = BCLK_100MHZ, .cst_limit = CST_LIMIT_HSW, .trl_msrs = TRL_BASE, + .plr_msrs = PLR_CORE | PLR_GFX | PLR_RING, }; static const struct platform_features hsx_features = { @@ -422,6 +428,7 @@ static const struct platform_features hsx_features = { .bclk_freq = BCLK_100MHZ, .cst_limit = CST_LIMIT_HSW, .trl_msrs = TRL_BASE | TRL_LIMIT1 | TRL_LIMIT2, + .plr_msrs = PLR_CORE | PLR_RING, }; static const struct platform_features hswl_features = { @@ -432,6 +439,7 @@ static const struct platform_features hswl_features = { .bclk_freq = BCLK_100MHZ, .cst_limit = CST_LIMIT_HSW, .trl_msrs = TRL_BASE, + .plr_msrs = PLR_CORE | PLR_GFX | PLR_RING, }; static const struct platform_features hswg_features = { @@ -442,6 +450,7 @@ static const struct platform_features hswg_features = { .bclk_freq = BCLK_100MHZ, .cst_limit = CST_LIMIT_HSW, .trl_msrs = TRL_BASE, + .plr_msrs = PLR_CORE | PLR_GFX | PLR_RING, }; static const struct platform_features bdw_features = { @@ -4657,7 +4666,7 @@ int print_perf_limit(struct thread_data *t, struct core_data *c, struct pkg_data return -1; } - if (do_core_perf_limit_reasons) { + if (platform->plr_msrs & PLR_CORE) { get_msr(cpu, MSR_CORE_PERF_LIMIT_REASONS, &msr); fprintf(outf, "cpu%d: MSR_CORE_PERF_LIMIT_REASONS, 0x%08llx", cpu, msr); fprintf(outf, " (Active: %s%s%s%s%s%s%s%s%s%s%s%s%s%s)", @@ -4690,7 +4699,7 @@ int print_perf_limit(struct thread_data *t, struct core_data *c, struct pkg_data (msr & 1 << 17) ? "ThermStatus, " : "", (msr & 1 << 16) ? "PROCHOT, " : ""); } - if (do_gfx_perf_limit_reasons) { + if (platform->plr_msrs & PLR_GFX) { get_msr(cpu, MSR_GFX_PERF_LIMIT_REASONS, &msr); fprintf(outf, "cpu%d: MSR_GFX_PERF_LIMIT_REASONS, 0x%08llx", cpu, msr); fprintf(outf, " (Active: %s%s%s%s%s%s%s%s)", @@ -4710,7 +4719,7 @@ int print_perf_limit(struct thread_data *t, struct core_data *c, struct pkg_data (msr & 1 << 25) ? "GFXPwr, " : "", (msr & 1 << 26) ? "PkgPwrL1, " : "", (msr & 1 << 27) ? "PkgPwrL2, " : ""); } - if (do_ring_perf_limit_reasons) { + if (platform->plr_msrs & PLR_RING) { get_msr(cpu, MSR_RING_PERF_LIMIT_REASONS, &msr); fprintf(outf, "cpu%d: MSR_RING_PERF_LIMIT_REASONS, 0x%08llx", cpu, msr); fprintf(outf, " (Active: %s%s%s%s%s%s)", @@ -5002,28 +5011,6 @@ void rapl_probe(unsigned int family, unsigned int model) rapl_probe_amd(family, model); } -void perf_limit_reasons_probe(unsigned int family, unsigned int model) -{ - if (!genuine_intel) - return; - - if (family != 6) - return; - - switch (model) { - case INTEL_FAM6_HASWELL: /* HSW */ - case INTEL_FAM6_HASWELL_L: /* HSW */ - case INTEL_FAM6_HASWELL_G: /* HSW */ - do_gfx_perf_limit_reasons = 1; - /* FALLTHRU */ - case INTEL_FAM6_HASWELL_X: /* HSX */ - do_core_perf_limit_reasons = 1; - do_ring_perf_limit_reasons = 1; - default: - return; - } -} - void automatic_cstate_conversion_probe(unsigned int family, unsigned int model) { if (family != 6) @@ -5952,7 +5939,6 @@ void process_cpuid() decode_c6_demotion_policy_msr(); rapl_probe(family, model); - perf_limit_reasons_probe(family, model); automatic_cstate_conversion_probe(family, model); prewake_cstate_probe(family, model); -- cgit v1.2.3 From d90120bf9f111bec8ba0b8ef86c46ccbcd9df188 Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Sat, 22 Apr 2023 11:29:18 +0800 Subject: tools/power/turbostat: Abstract Automatic Cstate Conversion support Abstract the support for AUTOMATIC_CSTATE_CONVERSION bit in MSR_PKG_CST_CONFIG_CONTROL. Delete automatic_cstate_conversion_probe() CPU model check. Signed-off-by: Zhang Rui Reviewed-by: Len Brown --- tools/power/x86/turbostat/turbostat.c | 19 ++++--------------- 1 file changed, 4 insertions(+), 15 deletions(-) diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c index 1207845340ad..a235cbf7b581 100644 --- a/tools/power/x86/turbostat/turbostat.c +++ b/tools/power/x86/turbostat/turbostat.c @@ -259,7 +259,6 @@ unsigned int tj_max_override; double rapl_power_units, rapl_time_units; double rapl_dram_energy_units, rapl_energy_units; double rapl_joule_counter_range; -unsigned int has_automatic_cstate_conversion; unsigned int dis_cstate_prewake; unsigned int crystal_hz; unsigned long long tsc_hz; @@ -285,6 +284,7 @@ struct platform_features { bool has_config_tdp; /* MSR_CONFIG_TDP_NOMINAL/LEVEL_1/LEVEL_2/CONTROL, MSR_TURBO_ACTIVATION_RATIO */ int bclk_freq; /* CPU base clock */ int cst_limit; /* MSR_PKG_CST_CONFIG_CONTROL */ + bool has_cst_auto_convension; /* AUTOMATIC_CSTATE_CONVERSION bit in MSR_PKG_CST_CONFIG_CONTROL */ int trl_msrs; /* MSR_TURBO_RATIO_LIMIT/LIMIT1/LIMIT2/SECONDARY, Atom TRL MSRs */ int plr_msrs; /* MSR_CORE/GFX/RING_PERF_LIMIT_REASONS */ int tcc_offset_bits; /* TCC Offset bits in MSR_IA32_TEMPERATURE_TARGET */ @@ -480,6 +480,7 @@ static const struct platform_features bdx_features = { .has_config_tdp = 1, .bclk_freq = BCLK_100MHZ, .cst_limit = CST_LIMIT_HSW, + .has_cst_auto_convension = 1, .trl_msrs = TRL_BASE, }; @@ -512,6 +513,7 @@ static const struct platform_features skx_features = { .has_config_tdp = 1, .bclk_freq = BCLK_100MHZ, .cst_limit = CST_LIMIT_SKX, + .has_cst_auto_convension = 1, .trl_msrs = TRL_BASE | TRL_CORECOUNT, }; @@ -3116,7 +3118,7 @@ static void dump_cst_cfg(void) (msr & (1 << 15)) ? "" : "UN", (unsigned int)msr & 0xF, pkg_cstate_limit_strings[pkg_cstate_limit]); #define AUTOMATIC_CSTATE_CONVERSION (1UL << 16) - if (has_automatic_cstate_conversion) { + if (platform->has_cst_auto_convension) { fprintf(outf, ", automatic c-state conversion=%s", (msr & AUTOMATIC_CSTATE_CONVERSION) ? "on" : "off"); } @@ -5011,18 +5013,6 @@ void rapl_probe(unsigned int family, unsigned int model) rapl_probe_amd(family, model); } -void automatic_cstate_conversion_probe(unsigned int family, unsigned int model) -{ - if (family != 6) - return; - - switch (model) { - case INTEL_FAM6_BROADWELL_X: - case INTEL_FAM6_SKYLAKE_X: - has_automatic_cstate_conversion = 1; - } -} - void prewake_cstate_probe(unsigned int family, unsigned int model) { if (is_icx(family, model) || is_spr(family, model)) @@ -5939,7 +5929,6 @@ void process_cpuid() decode_c6_demotion_policy_msr(); rapl_probe(family, model); - automatic_cstate_conversion_probe(family, model); prewake_cstate_probe(family, model); if (!quiet) -- cgit v1.2.3 From a5d1ab93a0993616efbf61378e491d6673f4684d Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Sat, 22 Apr 2023 11:39:49 +0800 Subject: tools/power/turbostat: Abstract hardcoded Crystal Clock frequency Abstract the support for hardcoded Crystal Clock frequency, which is used when crystal clock is not available from CPUID.15. Delete CPU model checks in process_cpuid(). Signed-off-by: Zhang Rui Reviewed-by: Len Brown --- tools/power/x86/turbostat/turbostat.c | 21 ++++++--------------- 1 file changed, 6 insertions(+), 15 deletions(-) diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c index a235cbf7b581..c76baa10f4eb 100644 --- a/tools/power/x86/turbostat/turbostat.c +++ b/tools/power/x86/turbostat/turbostat.c @@ -283,6 +283,7 @@ struct platform_features { bool has_nhm_msrs; /* MSR_PLATFORM_INFO, MSR_IA32_TEMPERATURE_TARGET, MSR_SMI_COUNT, MSR_PKG_CST_CONFIG_CONTROL, TRL MSRs */ bool has_config_tdp; /* MSR_CONFIG_TDP_NOMINAL/LEVEL_1/LEVEL_2/CONTROL, MSR_TURBO_ACTIVATION_RATIO */ int bclk_freq; /* CPU base clock */ + int crystal_freq; /* Crystal clock to use when not available from CPUID.15 */ int cst_limit; /* MSR_PKG_CST_CONFIG_CONTROL */ bool has_cst_auto_convension; /* AUTOMATIC_CSTATE_CONVERSION bit in MSR_PKG_CST_CONFIG_CONTROL */ int trl_msrs; /* MSR_TURBO_RATIO_LIMIT/LIMIT1/LIMIT2/SECONDARY, Atom TRL MSRs */ @@ -490,6 +491,7 @@ static const struct platform_features skl_features = { .has_nhm_msrs = 1, .has_config_tdp = 1, .bclk_freq = BCLK_100MHZ, + .crystal_freq = 24000000, .cst_limit = CST_LIMIT_HSW, .trl_msrs = TRL_BASE, .tcc_offset_bits = 6, @@ -563,6 +565,7 @@ static const struct platform_features gmt_features = { .has_msr_misc_pwr_mgmt = 1, .has_nhm_msrs = 1, .bclk_freq = BCLK_100MHZ, + .crystal_freq = 19200000, .cst_limit = CST_LIMIT_GMT, .trl_msrs = TRL_BASE | TRL_CORECOUNT, }; @@ -571,6 +574,7 @@ static const struct platform_features gmtd_features = { .has_msr_misc_pwr_mgmt = 1, .has_nhm_msrs = 1, .bclk_freq = BCLK_100MHZ, + .crystal_freq = 25000000, .cst_limit = CST_LIMIT_GMT, .trl_msrs = TRL_BASE | TRL_CORECOUNT, }; @@ -579,6 +583,7 @@ static const struct platform_features gmtp_features = { .has_msr_misc_pwr_mgmt = 1, .has_nhm_msrs = 1, .bclk_freq = BCLK_100MHZ, + .crystal_freq = 19200000, .cst_limit = CST_LIMIT_GMT, .trl_msrs = TRL_BASE, }; @@ -5796,26 +5801,12 @@ void process_cpuid() __cpuid(0x15, eax_crystal, ebx_tsc, crystal_hz, edx); if (ebx_tsc != 0) { - if (!quiet && (ebx != 0)) fprintf(outf, "CPUID(0x15): eax_crystal: %d ebx_tsc: %d ecx_crystal_hz: %d\n", eax_crystal, ebx_tsc, crystal_hz); if (crystal_hz == 0) - switch (model) { - case INTEL_FAM6_SKYLAKE_L: /* SKL */ - crystal_hz = 24000000; /* 24.0 MHz */ - break; - case INTEL_FAM6_ATOM_GOLDMONT_D: /* DNV */ - crystal_hz = 25000000; /* 25.0 MHz */ - break; - case INTEL_FAM6_ATOM_GOLDMONT: /* BXT */ - case INTEL_FAM6_ATOM_GOLDMONT_PLUS: - crystal_hz = 19200000; /* 19.2 MHz */ - break; - default: - crystal_hz = 0; - } + crystal_hz = platform->crystal_freq; if (crystal_hz) { tsc_hz = (unsigned long long)crystal_hz *ebx_tsc / eax_crystal; -- cgit v1.2.3 From b9cd66833d3a651cea10666674e9abcf2182e8ad Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Sat, 26 Aug 2023 14:38:38 +0800 Subject: tools/power/turbostat: Redefine RAPL macros Redefine RAPL macros to make the code more readable. Signed-off-by: Zhang Rui Reviewed-by: Len Brown --- tools/power/x86/turbostat/turbostat.c | 102 +++++++++++++++------------------- 1 file changed, 45 insertions(+), 57 deletions(-) diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c index c76baa10f4eb..4829e8289feb 100644 --- a/tools/power/x86/turbostat/turbostat.c +++ b/tools/power/x86/turbostat/turbostat.c @@ -358,6 +358,40 @@ enum perf_limit_reason_msrs { PLR_RING = BIT(2), }; +/* For RAPL MSRs */ +enum rapl_msrs { + RAPL_PKG_POWER_LIMIT = BIT(0), /* 0x610 MSR_PKG_POWER_LIMIT */ + RAPL_PKG_ENERGY_STATUS = BIT(1), /* 0x611 MSR_PKG_ENERGY_STATUS */ + RAPL_PKG_PERF_STATUS = BIT(2), /* 0x613 MSR_PKG_PERF_STATUS */ + RAPL_PKG_POWER_INFO = BIT(3), /* 0x614 MSR_PKG_POWER_INFO */ + RAPL_DRAM_POWER_LIMIT = BIT(4), /* 0x618 MSR_DRAM_POWER_LIMIT */ + RAPL_DRAM_ENERGY_STATUS = BIT(5), /* 0x619 MSR_DRAM_ENERGY_STATUS */ + RAPL_DRAM_PERF_STATUS = BIT(6), /* 0x61b MSR_DRAM_PERF_STATUS */ + RAPL_DRAM_POWER_INFO = BIT(7), /* 0x61c MSR_DRAM_POWER_INFO */ + RAPL_CORE_POWER_LIMIT = BIT(8), /* 0x638 MSR_PP0_POWER_LIMIT */ + RAPL_CORE_ENERGY_STATUS = BIT(9), /* 0x639 MSR_PP0_ENERGY_STATUS */ + RAPL_CORE_POLICY = BIT(10), /* 0x63a MSR_PP0_POLICY */ + RAPL_GFX_POWER_LIMIT = BIT(11), /* 0x640 MSR_PP1_POWER_LIMIT */ + RAPL_GFX_ENERGY_STATUS = BIT(12), /* 0x641 MSR_PP1_ENERGY_STATUS */ + RAPL_GFX_POLICY = BIT(13), /* 0x642 MSR_PP1_POLICY */ + RAPL_AMD_PWR_UNIT = BIT(14), /* 0xc0010299 MSR_AMD_RAPL_POWER_UNIT */ + RAPL_AMD_CORE_ENERGY_STAT = BIT(15), /* 0xc001029a MSR_AMD_CORE_ENERGY_STATUS */ + RAPL_AMD_PKG_ENERGY_STAT = BIT(16), /* 0xc001029b MSR_AMD_PKG_ENERGY_STATUS */ + RAPL_PER_CORE_ENERGY = BIT(17), /* Indicates cores energy collection is per-core, not per-package. */ +}; + +#define RAPL_PKG (RAPL_PKG_ENERGY_STATUS | RAPL_PKG_POWER_LIMIT) +#define RAPL_DRAM (RAPL_DRAM_ENERGY_STATUS | RAPL_DRAM_POWER_LIMIT) +#define RAPL_CORE (RAPL_CORE_ENERGY_STATUS | RAPL_CORE_POWER_LIMIT) +#define RAPL_GFX (RAPL_GFX_POWER_LIMIT | RAPL_GFX_ENERGY_STATUS) + +#define RAPL_PKG_ALL (RAPL_PKG | RAPL_PKG_PERF_STATUS | RAPL_PKG_POWER_INFO) +#define RAPL_DRAM_ALL (RAPL_DRAM | RAPL_DRAM_PERF_STATUS | RAPL_DRAM_POWER_INFO) +#define RAPL_CORE_ALL (RAPL_CORE | RAPL_CORE_POLICY) +#define RAPL_GFX_ALL (RAPL_GFX | RAPL_GFX_POLIGY) + +#define RAPL_AMD_F17H (RAPL_AMD_PWR_UNIT | RAPL_AMD_CORE_ENERGY_STAT | RAPL_AMD_PKG_ENERGY_STAT) + static const struct platform_features nhm_features = { .has_msr_misc_pwr_mgmt = 1, .has_nhm_msrs = 1, @@ -712,42 +746,6 @@ void probe_platform_features(unsigned int family, unsigned int model) /* Model specific support End */ -#define RAPL_PKG (1 << 0) - /* 0x610 MSR_PKG_POWER_LIMIT */ - /* 0x611 MSR_PKG_ENERGY_STATUS */ -#define RAPL_PKG_PERF_STATUS (1 << 1) - /* 0x613 MSR_PKG_PERF_STATUS */ -#define RAPL_PKG_POWER_INFO (1 << 2) - /* 0x614 MSR_PKG_POWER_INFO */ - -#define RAPL_DRAM (1 << 3) - /* 0x618 MSR_DRAM_POWER_LIMIT */ - /* 0x619 MSR_DRAM_ENERGY_STATUS */ -#define RAPL_DRAM_PERF_STATUS (1 << 4) - /* 0x61b MSR_DRAM_PERF_STATUS */ -#define RAPL_DRAM_POWER_INFO (1 << 5) - /* 0x61c MSR_DRAM_POWER_INFO */ - -#define RAPL_CORES_POWER_LIMIT (1 << 6) - /* 0x638 MSR_PP0_POWER_LIMIT */ -#define RAPL_CORE_POLICY (1 << 7) - /* 0x63a MSR_PP0_POLICY */ - -#define RAPL_GFX (1 << 8) - /* 0x640 MSR_PP1_POWER_LIMIT */ - /* 0x641 MSR_PP1_ENERGY_STATUS */ - /* 0x642 MSR_PP1_POLICY */ - -#define RAPL_CORES_ENERGY_STATUS (1 << 9) - /* 0x639 MSR_PP0_ENERGY_STATUS */ -#define RAPL_PER_CORE_ENERGY (1 << 10) - /* Indicates cores energy collection is per-core, - * not per-package. */ -#define RAPL_AMD_F17H (1 << 11) - /* 0xc0010299 MSR_RAPL_PWR_UNIT */ - /* 0xc001029a MSR_CORE_ENERGY_STAT */ - /* 0xc001029b MSR_PKG_ENERGY_STAT */ -#define RAPL_CORES (RAPL_CORES_ENERGY_STATUS | RAPL_CORES_POWER_LIMIT) #define TJMAX_DEFAULT 100 /* MSRs that are not yet in the kernel-provided header. */ @@ -948,7 +946,7 @@ int idx_valid(int idx) case IDX_DRAM_ENERGY: return do_rapl & RAPL_DRAM; case IDX_PP0_ENERGY: - return do_rapl & RAPL_CORES_ENERGY_STATUS; + return do_rapl & RAPL_CORE_ENERGY_STATUS; case IDX_PP1_ENERGY: return do_rapl & RAPL_GFX; case IDX_PKG_PERF: @@ -2710,7 +2708,7 @@ retry: return -13; p->energy_pkg = msr; } - if (do_rapl & RAPL_CORES_ENERGY_STATUS) { + if (do_rapl & RAPL_CORE_ENERGY_STATUS) { if (get_msr_sum(cpu, MSR_PP0_ENERGY_STATUS, &msr)) return -14; p->energy_cores = msr; @@ -4810,7 +4808,7 @@ void rapl_probe_intel(unsigned int family, unsigned int model) case INTEL_FAM6_HASWELL_G: /* HSW */ case INTEL_FAM6_BROADWELL: /* BDW */ case INTEL_FAM6_BROADWELL_G: /* BDW */ - do_rapl = RAPL_PKG | RAPL_CORES | RAPL_CORE_POLICY | RAPL_GFX | RAPL_PKG_POWER_INFO; + do_rapl = RAPL_PKG | RAPL_CORE_ALL | RAPL_GFX | RAPL_PKG_POWER_INFO; if (rapl_joules) { BIC_PRESENT(BIC_Pkg_J); BIC_PRESENT(BIC_Cor_J); @@ -4830,9 +4828,7 @@ void rapl_probe_intel(unsigned int family, unsigned int model) BIC_PRESENT(BIC_PkgWatt); break; case INTEL_FAM6_ATOM_TREMONT: /* EHL */ - do_rapl = - RAPL_PKG | RAPL_CORES | RAPL_CORE_POLICY | RAPL_DRAM | RAPL_DRAM_PERF_STATUS | RAPL_PKG_PERF_STATUS - | RAPL_GFX | RAPL_PKG_POWER_INFO; + do_rapl = RAPL_PKG_ALL | RAPL_CORE_ALL | RAPL_DRAM | RAPL_DRAM_PERF_STATUS | RAPL_GFX; if (rapl_joules) { BIC_PRESENT(BIC_Pkg_J); BIC_PRESENT(BIC_Cor_J); @@ -4846,7 +4842,7 @@ void rapl_probe_intel(unsigned int family, unsigned int model) } break; case INTEL_FAM6_ATOM_TREMONT_D: /* JVL */ - do_rapl = RAPL_PKG | RAPL_PKG_PERF_STATUS | RAPL_PKG_POWER_INFO; + do_rapl = RAPL_PKG_ALL; BIC_PRESENT(BIC_PKG__); if (rapl_joules) BIC_PRESENT(BIC_Pkg_J); @@ -4855,9 +4851,7 @@ void rapl_probe_intel(unsigned int family, unsigned int model) break; case INTEL_FAM6_SKYLAKE_L: /* SKL */ case INTEL_FAM6_CANNONLAKE_L: /* CNL */ - do_rapl = - RAPL_PKG | RAPL_CORES | RAPL_CORE_POLICY | RAPL_DRAM | RAPL_DRAM_PERF_STATUS | RAPL_PKG_PERF_STATUS - | RAPL_GFX | RAPL_PKG_POWER_INFO; + do_rapl = RAPL_PKG_ALL | RAPL_CORE_ALL | RAPL_DRAM | RAPL_DRAM_PERF_STATUS | RAPL_GFX; BIC_PRESENT(BIC_PKG__); BIC_PRESENT(BIC_RAM__); if (rapl_joules) { @@ -4878,9 +4872,7 @@ void rapl_probe_intel(unsigned int family, unsigned int model) case INTEL_FAM6_ICELAKE_X: /* ICX */ case INTEL_FAM6_SAPPHIRERAPIDS_X: /* SPR */ case INTEL_FAM6_XEON_PHI_KNL: /* KNL */ - do_rapl = - RAPL_PKG | RAPL_DRAM | RAPL_DRAM_POWER_INFO | RAPL_DRAM_PERF_STATUS | RAPL_PKG_PERF_STATUS | - RAPL_PKG_POWER_INFO; + do_rapl = RAPL_PKG_ALL | RAPL_DRAM_ALL; BIC_PRESENT(BIC_PKG__); BIC_PRESENT(BIC_RAM__); if (rapl_joules) { @@ -4893,9 +4885,7 @@ void rapl_probe_intel(unsigned int family, unsigned int model) break; case INTEL_FAM6_SANDYBRIDGE_X: case INTEL_FAM6_IVYBRIDGE_X: - do_rapl = - RAPL_PKG | RAPL_CORES | RAPL_CORE_POLICY | RAPL_DRAM | RAPL_DRAM_POWER_INFO | RAPL_PKG_PERF_STATUS | - RAPL_DRAM_PERF_STATUS | RAPL_PKG_POWER_INFO; + do_rapl = RAPL_PKG_ALL | RAPL_CORE_ALL | RAPL_DRAM_ALL; BIC_PRESENT(BIC_PKG__); BIC_PRESENT(BIC_RAM__); if (rapl_joules) { @@ -4910,7 +4900,7 @@ void rapl_probe_intel(unsigned int family, unsigned int model) break; case INTEL_FAM6_ATOM_SILVERMONT: /* BYT */ case INTEL_FAM6_ATOM_SILVERMONT_D: /* AVN */ - do_rapl = RAPL_PKG | RAPL_CORES; + do_rapl = RAPL_PKG | RAPL_CORE; if (rapl_joules) { BIC_PRESENT(BIC_Pkg_J); BIC_PRESENT(BIC_Cor_J); @@ -4920,9 +4910,7 @@ void rapl_probe_intel(unsigned int family, unsigned int model) } break; case INTEL_FAM6_ATOM_GOLDMONT_D: /* DNV */ - do_rapl = - RAPL_PKG | RAPL_DRAM | RAPL_DRAM_POWER_INFO | RAPL_DRAM_PERF_STATUS | RAPL_PKG_PERF_STATUS | - RAPL_PKG_POWER_INFO | RAPL_CORES_ENERGY_STATUS; + do_rapl = RAPL_PKG_ALL | RAPL_DRAM_ALL | RAPL_CORE_ENERGY_STATUS; BIC_PRESENT(BIC_PKG__); BIC_PRESENT(BIC_RAM__); if (rapl_joules) { @@ -5195,7 +5183,7 @@ int print_rapl(struct thread_data *t, struct core_data *c, struct pkg_data *p) fprintf(outf, "cpu%d: MSR_PP0_POLICY: %lld\n", cpu, msr & 0xF); } - if (do_rapl & RAPL_CORES_POWER_LIMIT) { + if (do_rapl & RAPL_CORE_POWER_LIMIT) { if (get_msr(cpu, MSR_PP0_POWER_LIMIT, &msr)) return -9; fprintf(outf, "cpu%d: MSR_PP0_POWER_LIMIT: 0x%08llx (%slocked)\n", -- cgit v1.2.3 From a98f886035d5f7e0ec66036dd6bf98b40e75b692 Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Sat, 26 Aug 2023 14:57:12 +0800 Subject: tools/power/turbostat: Simplify the logic for RAPL enumeration The support for each RAPL domains, as well as the support for the perf status of each RAPL domains, can be detected by checking the availabilities of the corresponding RAPL MSRs. Change the code accordingly and remove the hardcoded logic for each model. Note that this also fixes the INTEL_FAM6_ATOM_TREMONT model, which has RAPL_PKG_PERF_STATUS and MSR_DRAM_PERF_STATUS but doesn't have BIC_PKG__ and BIC_RAM__ set. Signed-off-by: Zhang Rui Reviewed-by: Len Brown --- tools/power/x86/turbostat/turbostat.c | 99 ++++++++--------------------------- 1 file changed, 22 insertions(+), 77 deletions(-) diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c index 4829e8289feb..b2da36437b12 100644 --- a/tools/power/x86/turbostat/turbostat.c +++ b/tools/power/x86/turbostat/turbostat.c @@ -4809,62 +4809,20 @@ void rapl_probe_intel(unsigned int family, unsigned int model) case INTEL_FAM6_BROADWELL: /* BDW */ case INTEL_FAM6_BROADWELL_G: /* BDW */ do_rapl = RAPL_PKG | RAPL_CORE_ALL | RAPL_GFX | RAPL_PKG_POWER_INFO; - if (rapl_joules) { - BIC_PRESENT(BIC_Pkg_J); - BIC_PRESENT(BIC_Cor_J); - BIC_PRESENT(BIC_GFX_J); - } else { - BIC_PRESENT(BIC_PkgWatt); - BIC_PRESENT(BIC_CorWatt); - BIC_PRESENT(BIC_GFXWatt); - } break; case INTEL_FAM6_ATOM_GOLDMONT: /* BXT */ case INTEL_FAM6_ATOM_GOLDMONT_PLUS: do_rapl = RAPL_PKG | RAPL_PKG_POWER_INFO; - if (rapl_joules) - BIC_PRESENT(BIC_Pkg_J); - else - BIC_PRESENT(BIC_PkgWatt); break; case INTEL_FAM6_ATOM_TREMONT: /* EHL */ do_rapl = RAPL_PKG_ALL | RAPL_CORE_ALL | RAPL_DRAM | RAPL_DRAM_PERF_STATUS | RAPL_GFX; - if (rapl_joules) { - BIC_PRESENT(BIC_Pkg_J); - BIC_PRESENT(BIC_Cor_J); - BIC_PRESENT(BIC_RAM_J); - BIC_PRESENT(BIC_GFX_J); - } else { - BIC_PRESENT(BIC_PkgWatt); - BIC_PRESENT(BIC_CorWatt); - BIC_PRESENT(BIC_RAMWatt); - BIC_PRESENT(BIC_GFXWatt); - } break; case INTEL_FAM6_ATOM_TREMONT_D: /* JVL */ do_rapl = RAPL_PKG_ALL; - BIC_PRESENT(BIC_PKG__); - if (rapl_joules) - BIC_PRESENT(BIC_Pkg_J); - else - BIC_PRESENT(BIC_PkgWatt); break; case INTEL_FAM6_SKYLAKE_L: /* SKL */ case INTEL_FAM6_CANNONLAKE_L: /* CNL */ do_rapl = RAPL_PKG_ALL | RAPL_CORE_ALL | RAPL_DRAM | RAPL_DRAM_PERF_STATUS | RAPL_GFX; - BIC_PRESENT(BIC_PKG__); - BIC_PRESENT(BIC_RAM__); - if (rapl_joules) { - BIC_PRESENT(BIC_Pkg_J); - BIC_PRESENT(BIC_Cor_J); - BIC_PRESENT(BIC_RAM_J); - BIC_PRESENT(BIC_GFX_J); - } else { - BIC_PRESENT(BIC_PkgWatt); - BIC_PRESENT(BIC_CorWatt); - BIC_PRESENT(BIC_RAMWatt); - BIC_PRESENT(BIC_GFXWatt); - } break; case INTEL_FAM6_HASWELL_X: /* HSX */ case INTEL_FAM6_BROADWELL_X: /* BDX */ @@ -4873,60 +4831,47 @@ void rapl_probe_intel(unsigned int family, unsigned int model) case INTEL_FAM6_SAPPHIRERAPIDS_X: /* SPR */ case INTEL_FAM6_XEON_PHI_KNL: /* KNL */ do_rapl = RAPL_PKG_ALL | RAPL_DRAM_ALL; - BIC_PRESENT(BIC_PKG__); - BIC_PRESENT(BIC_RAM__); - if (rapl_joules) { - BIC_PRESENT(BIC_Pkg_J); - BIC_PRESENT(BIC_RAM_J); - } else { - BIC_PRESENT(BIC_PkgWatt); - BIC_PRESENT(BIC_RAMWatt); - } break; case INTEL_FAM6_SANDYBRIDGE_X: case INTEL_FAM6_IVYBRIDGE_X: do_rapl = RAPL_PKG_ALL | RAPL_CORE_ALL | RAPL_DRAM_ALL; - BIC_PRESENT(BIC_PKG__); - BIC_PRESENT(BIC_RAM__); - if (rapl_joules) { - BIC_PRESENT(BIC_Pkg_J); - BIC_PRESENT(BIC_Cor_J); - BIC_PRESENT(BIC_RAM_J); - } else { - BIC_PRESENT(BIC_PkgWatt); - BIC_PRESENT(BIC_CorWatt); - BIC_PRESENT(BIC_RAMWatt); - } break; case INTEL_FAM6_ATOM_SILVERMONT: /* BYT */ case INTEL_FAM6_ATOM_SILVERMONT_D: /* AVN */ do_rapl = RAPL_PKG | RAPL_CORE; - if (rapl_joules) { - BIC_PRESENT(BIC_Pkg_J); - BIC_PRESENT(BIC_Cor_J); - } else { - BIC_PRESENT(BIC_PkgWatt); - BIC_PRESENT(BIC_CorWatt); - } break; case INTEL_FAM6_ATOM_GOLDMONT_D: /* DNV */ do_rapl = RAPL_PKG_ALL | RAPL_DRAM_ALL | RAPL_CORE_ENERGY_STATUS; - BIC_PRESENT(BIC_PKG__); - BIC_PRESENT(BIC_RAM__); - if (rapl_joules) { + break; + default: + return; + } + + if (rapl_joules) { + if (do_rapl & RAPL_PKG_ENERGY_STATUS) BIC_PRESENT(BIC_Pkg_J); + if (do_rapl & RAPL_CORE_ENERGY_STATUS) BIC_PRESENT(BIC_Cor_J); + if (do_rapl & RAPL_DRAM_ENERGY_STATUS) BIC_PRESENT(BIC_RAM_J); - } else { + if (do_rapl & RAPL_GFX_ENERGY_STATUS) + BIC_PRESENT(BIC_GFX_J); + } else { + if (do_rapl & RAPL_PKG_ENERGY_STATUS) BIC_PRESENT(BIC_PkgWatt); + if (do_rapl & RAPL_CORE_ENERGY_STATUS) BIC_PRESENT(BIC_CorWatt); + if (do_rapl & RAPL_DRAM_ENERGY_STATUS) BIC_PRESENT(BIC_RAMWatt); - } - break; - default: - return; + if (do_rapl & RAPL_GFX_ENERGY_STATUS) + BIC_PRESENT(BIC_GFXWatt); } + if (do_rapl & RAPL_PKG_PERF_STATUS) + BIC_PRESENT(BIC_PKG__); + if (do_rapl & RAPL_DRAM_PERF_STATUS) + BIC_PRESENT(BIC_RAM__); + /* units on package 0, verify later other packages match */ if (get_msr(base_cpu, MSR_RAPL_POWER_UNIT, &msr)) return; -- cgit v1.2.3 From 86ba263d9b72b7766a99059e9b3bd104d089b7fa Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Mon, 28 Aug 2023 15:09:40 +0800 Subject: tools/power/turbostat: Abstract RAPL MSRs support Abstract the support for RAPL MSRs. Delete CPU model checks in rapl_probe_intel(). Signed-off-by: Zhang Rui Reviewed-by: Len Brown --- tools/power/x86/turbostat/turbostat.c | 189 +++++++++++++++------------------- 1 file changed, 85 insertions(+), 104 deletions(-) diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c index b2da36437b12..90e1abe96dd5 100644 --- a/tools/power/x86/turbostat/turbostat.c +++ b/tools/power/x86/turbostat/turbostat.c @@ -288,6 +288,7 @@ struct platform_features { bool has_cst_auto_convension; /* AUTOMATIC_CSTATE_CONVERSION bit in MSR_PKG_CST_CONFIG_CONTROL */ int trl_msrs; /* MSR_TURBO_RATIO_LIMIT/LIMIT1/LIMIT2/SECONDARY, Atom TRL MSRs */ int plr_msrs; /* MSR_CORE/GFX/RING_PERF_LIMIT_REASONS */ + int rapl_msrs; /* RAPL PKG/DRAM/CORE/GFX MSRs, AMD RAPL MSRs */ int tcc_offset_bits; /* TCC Offset bits in MSR_IA32_TEMPERATURE_TARGET */ }; @@ -414,6 +415,7 @@ static const struct platform_features snb_features = { .bclk_freq = BCLK_100MHZ, .cst_limit = CST_LIMIT_SNB, .trl_msrs = TRL_BASE, + .rapl_msrs = RAPL_PKG | RAPL_CORE_ALL | RAPL_GFX | RAPL_PKG_POWER_INFO, }; static const struct platform_features snx_features = { @@ -423,6 +425,7 @@ static const struct platform_features snx_features = { .bclk_freq = BCLK_100MHZ, .cst_limit = CST_LIMIT_SNB, .trl_msrs = TRL_BASE, + .rapl_msrs = RAPL_PKG_ALL | RAPL_CORE_ALL | RAPL_DRAM_ALL, }; static const struct platform_features ivb_features = { @@ -433,6 +436,7 @@ static const struct platform_features ivb_features = { .bclk_freq = BCLK_100MHZ, .cst_limit = CST_LIMIT_SNB, .trl_msrs = TRL_BASE, + .rapl_msrs = RAPL_PKG | RAPL_CORE_ALL | RAPL_GFX | RAPL_PKG_POWER_INFO, }; static const struct platform_features ivx_features = { @@ -442,6 +446,7 @@ static const struct platform_features ivx_features = { .bclk_freq = BCLK_100MHZ, .cst_limit = CST_LIMIT_SNB, .trl_msrs = TRL_BASE | TRL_LIMIT1, + .rapl_msrs = RAPL_PKG_ALL | RAPL_CORE_ALL | RAPL_DRAM_ALL, }; static const struct platform_features hsw_features = { @@ -453,6 +458,7 @@ static const struct platform_features hsw_features = { .cst_limit = CST_LIMIT_HSW, .trl_msrs = TRL_BASE, .plr_msrs = PLR_CORE | PLR_GFX | PLR_RING, + .rapl_msrs = RAPL_PKG | RAPL_CORE_ALL | RAPL_GFX | RAPL_PKG_POWER_INFO, }; static const struct platform_features hsx_features = { @@ -464,6 +470,7 @@ static const struct platform_features hsx_features = { .cst_limit = CST_LIMIT_HSW, .trl_msrs = TRL_BASE | TRL_LIMIT1 | TRL_LIMIT2, .plr_msrs = PLR_CORE | PLR_RING, + .rapl_msrs = RAPL_PKG_ALL | RAPL_DRAM_ALL, }; static const struct platform_features hswl_features = { @@ -475,6 +482,7 @@ static const struct platform_features hswl_features = { .cst_limit = CST_LIMIT_HSW, .trl_msrs = TRL_BASE, .plr_msrs = PLR_CORE | PLR_GFX | PLR_RING, + .rapl_msrs = RAPL_PKG | RAPL_CORE_ALL | RAPL_GFX | RAPL_PKG_POWER_INFO, }; static const struct platform_features hswg_features = { @@ -486,6 +494,7 @@ static const struct platform_features hswg_features = { .cst_limit = CST_LIMIT_HSW, .trl_msrs = TRL_BASE, .plr_msrs = PLR_CORE | PLR_GFX | PLR_RING, + .rapl_msrs = RAPL_PKG | RAPL_CORE_ALL | RAPL_GFX | RAPL_PKG_POWER_INFO, }; static const struct platform_features bdw_features = { @@ -496,6 +505,7 @@ static const struct platform_features bdw_features = { .bclk_freq = BCLK_100MHZ, .cst_limit = CST_LIMIT_HSW, .trl_msrs = TRL_BASE, + .rapl_msrs = RAPL_PKG | RAPL_CORE_ALL | RAPL_GFX | RAPL_PKG_POWER_INFO, }; static const struct platform_features bdwg_features = { @@ -506,6 +516,7 @@ static const struct platform_features bdwg_features = { .bclk_freq = BCLK_100MHZ, .cst_limit = CST_LIMIT_HSW, .trl_msrs = TRL_BASE, + .rapl_msrs = RAPL_PKG | RAPL_CORE_ALL | RAPL_GFX | RAPL_PKG_POWER_INFO, }; static const struct platform_features bdx_features = { @@ -517,6 +528,7 @@ static const struct platform_features bdx_features = { .cst_limit = CST_LIMIT_HSW, .has_cst_auto_convension = 1, .trl_msrs = TRL_BASE, + .rapl_msrs = RAPL_PKG_ALL | RAPL_DRAM_ALL, }; static const struct platform_features skl_features = { @@ -529,6 +541,7 @@ static const struct platform_features skl_features = { .cst_limit = CST_LIMIT_HSW, .trl_msrs = TRL_BASE, .tcc_offset_bits = 6, + .rapl_msrs = RAPL_PKG_ALL | RAPL_CORE_ALL | RAPL_DRAM | RAPL_DRAM_PERF_STATUS | RAPL_GFX, }; static const struct platform_features cnl_features = { @@ -540,6 +553,7 @@ static const struct platform_features cnl_features = { .cst_limit = CST_LIMIT_HSW, .trl_msrs = TRL_BASE, .tcc_offset_bits = 6, + .rapl_msrs = RAPL_PKG_ALL | RAPL_CORE_ALL | RAPL_DRAM | RAPL_DRAM_PERF_STATUS | RAPL_GFX, }; static const struct platform_features skx_features = { @@ -551,6 +565,7 @@ static const struct platform_features skx_features = { .cst_limit = CST_LIMIT_SKX, .has_cst_auto_convension = 1, .trl_msrs = TRL_BASE | TRL_CORECOUNT, + .rapl_msrs = RAPL_PKG_ALL | RAPL_DRAM_ALL, }; static const struct platform_features icx_features = { @@ -561,6 +576,7 @@ static const struct platform_features icx_features = { .bclk_freq = BCLK_100MHZ, .cst_limit = CST_LIMIT_ICX, .trl_msrs = TRL_BASE | TRL_CORECOUNT, + .rapl_msrs = RAPL_PKG_ALL | RAPL_DRAM_ALL, }; static const struct platform_features spr_features = { @@ -571,6 +587,7 @@ static const struct platform_features spr_features = { .bclk_freq = BCLK_100MHZ, .cst_limit = CST_LIMIT_SKX, .trl_msrs = TRL_BASE | TRL_CORECOUNT, + .rapl_msrs = RAPL_PKG_ALL | RAPL_DRAM_ALL, }; static const struct platform_features slv_features = { @@ -578,6 +595,7 @@ static const struct platform_features slv_features = { .bclk_freq = BCLK_SLV, .cst_limit = CST_LIMIT_SLV, .trl_msrs = TRL_ATOM, + .rapl_msrs = RAPL_PKG | RAPL_CORE, }; static const struct platform_features slvd_features = { @@ -586,6 +604,7 @@ static const struct platform_features slvd_features = { .bclk_freq = BCLK_SLV, .cst_limit = CST_LIMIT_SLV, .trl_msrs = TRL_BASE, + .rapl_msrs = RAPL_PKG | RAPL_CORE, }; static const struct platform_features amt_features = { @@ -602,6 +621,7 @@ static const struct platform_features gmt_features = { .crystal_freq = 19200000, .cst_limit = CST_LIMIT_GMT, .trl_msrs = TRL_BASE | TRL_CORECOUNT, + .rapl_msrs = RAPL_PKG | RAPL_PKG_POWER_INFO, }; static const struct platform_features gmtd_features = { @@ -611,6 +631,7 @@ static const struct platform_features gmtd_features = { .crystal_freq = 25000000, .cst_limit = CST_LIMIT_GMT, .trl_msrs = TRL_BASE | TRL_CORECOUNT, + .rapl_msrs = RAPL_PKG_ALL | RAPL_DRAM_ALL | RAPL_CORE_ENERGY_STATUS, }; static const struct platform_features gmtp_features = { @@ -620,6 +641,7 @@ static const struct platform_features gmtp_features = { .crystal_freq = 19200000, .cst_limit = CST_LIMIT_GMT, .trl_msrs = TRL_BASE, + .rapl_msrs = RAPL_PKG | RAPL_PKG_POWER_INFO, }; static const struct platform_features tmt_features = { @@ -628,6 +650,7 @@ static const struct platform_features tmt_features = { .bclk_freq = BCLK_100MHZ, .cst_limit = CST_LIMIT_GMT, .trl_msrs = TRL_BASE, + .rapl_msrs = RAPL_PKG_ALL | RAPL_CORE_ALL | RAPL_DRAM | RAPL_DRAM_PERF_STATUS | RAPL_GFX, }; static const struct platform_features tmtd_features = { @@ -636,6 +659,7 @@ static const struct platform_features tmtd_features = { .bclk_freq = BCLK_100MHZ, .cst_limit = CST_LIMIT_GMT, .trl_msrs = TRL_BASE | TRL_CORECOUNT, + .rapl_msrs = RAPL_PKG_ALL, }; static const struct platform_features knl_features = { @@ -645,6 +669,7 @@ static const struct platform_features knl_features = { .bclk_freq = BCLK_100MHZ, .cst_limit = CST_LIMIT_KNL, .trl_msrs = TRL_KNL, + .rapl_msrs = RAPL_PKG_ALL | RAPL_DRAM_ALL, }; static const struct platform_features default_features = { @@ -653,6 +678,10 @@ static const struct platform_features default_features = { static const struct platform_features amd_features = { }; +static const struct platform_features amd_features_with_rapl = { + .rapl_msrs = RAPL_AMD_F17H, +}; + static const struct platform_data turbostat_pdata[] = { { INTEL_FAM6_NEHALEM, &nhm_features }, { INTEL_FAM6_NEHALEM_G, &nhm_features }, @@ -728,6 +757,17 @@ void probe_platform_features(unsigned int family, unsigned int model) if (authentic_amd || hygon_genuine) { platform = &amd_features; + + if (max_extended_level >= 0x80000007) { + unsigned int eax, ebx, ecx, edx; + + __cpuid(0x80000007, eax, ebx, ecx, edx); + /* RAPL (Fam 17h+) */ + if ((edx & (1 << 14)) && family >= 0x17) { + platform = &amd_features_with_rapl; + do_rapl = RAPL_PER_CORE_ENERGY; + } + } return; } @@ -882,7 +922,7 @@ off_t idx_to_offset(int idx) switch (idx) { case IDX_PKG_ENERGY: - if (do_rapl & RAPL_AMD_F17H) + if (platform->rapl_msrs & RAPL_AMD_F17H) offset = MSR_PKG_ENERGY_STAT; else offset = MSR_PKG_ENERGY_STATUS; @@ -942,17 +982,17 @@ int idx_valid(int idx) { switch (idx) { case IDX_PKG_ENERGY: - return do_rapl & (RAPL_PKG | RAPL_AMD_F17H); + return platform->rapl_msrs & (RAPL_PKG | RAPL_AMD_F17H); case IDX_DRAM_ENERGY: - return do_rapl & RAPL_DRAM; + return platform->rapl_msrs & RAPL_DRAM; case IDX_PP0_ENERGY: - return do_rapl & RAPL_CORE_ENERGY_STATUS; + return platform->rapl_msrs & RAPL_CORE_ENERGY_STATUS; case IDX_PP1_ENERGY: - return do_rapl & RAPL_GFX; + return platform->rapl_msrs & RAPL_GFX; case IDX_PKG_PERF: - return do_rapl & RAPL_PKG_PERF_STATUS; + return platform->rapl_msrs & RAPL_PKG_PERF_STATUS; case IDX_DRAM_PERF: - return do_rapl & RAPL_DRAM_PERF_STATUS; + return platform->rapl_msrs & RAPL_DRAM_PERF_STATUS; default: return 0; } @@ -1330,10 +1370,10 @@ void print_header(char *delim) if (DO_BIC(BIC_CORE_THROT_CNT)) outp += sprintf(outp, "%sCoreThr", (printed++ ? delim : "")); - if (do_rapl && !rapl_joules) { + if (platform->rapl_msrs && !rapl_joules) { if (DO_BIC(BIC_CorWatt) && (do_rapl & RAPL_PER_CORE_ENERGY)) outp += sprintf(outp, "%sCorWatt", (printed++ ? delim : "")); - } else if (do_rapl && rapl_joules) { + } else if (platform->rapl_msrs && rapl_joules) { if (DO_BIC(BIC_Cor_J) && (do_rapl & RAPL_PER_CORE_ENERGY)) outp += sprintf(outp, "%sCor_J", (printed++ ? delim : "")); } @@ -1392,7 +1432,7 @@ void print_header(char *delim) if (DO_BIC(BIC_SYS_LPI)) outp += sprintf(outp, "%sSYS%%LPI", (printed++ ? delim : "")); - if (do_rapl && !rapl_joules) { + if (platform->rapl_msrs && !rapl_joules) { if (DO_BIC(BIC_PkgWatt)) outp += sprintf(outp, "%sPkgWatt", (printed++ ? delim : "")); if (DO_BIC(BIC_CorWatt) && !(do_rapl & RAPL_PER_CORE_ENERGY)) @@ -1405,7 +1445,7 @@ void print_header(char *delim) outp += sprintf(outp, "%sPKG_%%", (printed++ ? delim : "")); if (DO_BIC(BIC_RAM__)) outp += sprintf(outp, "%sRAM_%%", (printed++ ? delim : "")); - } else if (do_rapl && rapl_joules) { + } else if (platform->rapl_msrs && rapl_joules) { if (DO_BIC(BIC_Pkg_J)) outp += sprintf(outp, "%sPkg_J", (printed++ ? delim : "")); if (DO_BIC(BIC_Cor_J) && !(do_rapl & RAPL_PER_CORE_ENERGY)) @@ -2638,7 +2678,7 @@ retry: if (DO_BIC(BIC_CORE_THROT_CNT)) get_core_throt_cnt(cpu, &c->core_throt_cnt); - if (do_rapl & RAPL_AMD_F17H) { + if (platform->rapl_msrs & RAPL_AMD_F17H) { if (get_msr(cpu, MSR_CORE_ENERGY_STAT, &msr)) return -14; c->core_energy = msr & 0xFFFFFFFF; @@ -2703,37 +2743,37 @@ retry: if (DO_BIC(BIC_SYS_LPI)) p->sys_lpi = cpuidle_cur_sys_lpi_us; - if (do_rapl & RAPL_PKG) { + if (platform->rapl_msrs & RAPL_PKG) { if (get_msr_sum(cpu, MSR_PKG_ENERGY_STATUS, &msr)) return -13; p->energy_pkg = msr; } - if (do_rapl & RAPL_CORE_ENERGY_STATUS) { + if (platform->rapl_msrs & RAPL_CORE_ENERGY_STATUS) { if (get_msr_sum(cpu, MSR_PP0_ENERGY_STATUS, &msr)) return -14; p->energy_cores = msr; } - if (do_rapl & RAPL_DRAM) { + if (platform->rapl_msrs & RAPL_DRAM) { if (get_msr_sum(cpu, MSR_DRAM_ENERGY_STATUS, &msr)) return -15; p->energy_dram = msr; } - if (do_rapl & RAPL_GFX) { + if (platform->rapl_msrs & RAPL_GFX) { if (get_msr_sum(cpu, MSR_PP1_ENERGY_STATUS, &msr)) return -16; p->energy_gfx = msr; } - if (do_rapl & RAPL_PKG_PERF_STATUS) { + if (platform->rapl_msrs & RAPL_PKG_PERF_STATUS) { if (get_msr_sum(cpu, MSR_PKG_PERF_STATUS, &msr)) return -16; p->rapl_pkg_perf_status = msr; } - if (do_rapl & RAPL_DRAM_PERF_STATUS) { + if (platform->rapl_msrs & RAPL_DRAM_PERF_STATUS) { if (get_msr_sum(cpu, MSR_DRAM_PERF_STATUS, &msr)) return -16; p->rapl_dram_perf_status = msr; } - if (do_rapl & RAPL_AMD_F17H) { + if (platform->rapl_msrs & RAPL_AMD_F17H) { if (get_msr_sum(cpu, MSR_PKG_ENERGY_STAT, &msr)) return -13; p->energy_pkg = msr; @@ -4750,7 +4790,7 @@ double get_tdp_intel(unsigned int model) { unsigned long long msr; - if (do_rapl & RAPL_PKG_POWER_INFO) + if (platform->rapl_msrs & RAPL_PKG_POWER_INFO) if (!get_msr(base_cpu, MSR_PKG_POWER_INFO, &msr)) return ((msr >> 0) & RAPL_POWER_GRANULARITY) * rapl_power_units; @@ -4791,85 +4831,35 @@ static double rapl_dram_energy_units_probe(int model, double rapl_energy_units) } } -void rapl_probe_intel(unsigned int family, unsigned int model) +void rapl_probe_intel(unsigned int model) { unsigned long long msr; unsigned int time_unit; double tdp; - if (family != 6) - return; - - switch (model) { - case INTEL_FAM6_SANDYBRIDGE: - case INTEL_FAM6_IVYBRIDGE: - case INTEL_FAM6_HASWELL: /* HSW */ - case INTEL_FAM6_HASWELL_L: /* HSW */ - case INTEL_FAM6_HASWELL_G: /* HSW */ - case INTEL_FAM6_BROADWELL: /* BDW */ - case INTEL_FAM6_BROADWELL_G: /* BDW */ - do_rapl = RAPL_PKG | RAPL_CORE_ALL | RAPL_GFX | RAPL_PKG_POWER_INFO; - break; - case INTEL_FAM6_ATOM_GOLDMONT: /* BXT */ - case INTEL_FAM6_ATOM_GOLDMONT_PLUS: - do_rapl = RAPL_PKG | RAPL_PKG_POWER_INFO; - break; - case INTEL_FAM6_ATOM_TREMONT: /* EHL */ - do_rapl = RAPL_PKG_ALL | RAPL_CORE_ALL | RAPL_DRAM | RAPL_DRAM_PERF_STATUS | RAPL_GFX; - break; - case INTEL_FAM6_ATOM_TREMONT_D: /* JVL */ - do_rapl = RAPL_PKG_ALL; - break; - case INTEL_FAM6_SKYLAKE_L: /* SKL */ - case INTEL_FAM6_CANNONLAKE_L: /* CNL */ - do_rapl = RAPL_PKG_ALL | RAPL_CORE_ALL | RAPL_DRAM | RAPL_DRAM_PERF_STATUS | RAPL_GFX; - break; - case INTEL_FAM6_HASWELL_X: /* HSX */ - case INTEL_FAM6_BROADWELL_X: /* BDX */ - case INTEL_FAM6_SKYLAKE_X: /* SKX */ - case INTEL_FAM6_ICELAKE_X: /* ICX */ - case INTEL_FAM6_SAPPHIRERAPIDS_X: /* SPR */ - case INTEL_FAM6_XEON_PHI_KNL: /* KNL */ - do_rapl = RAPL_PKG_ALL | RAPL_DRAM_ALL; - break; - case INTEL_FAM6_SANDYBRIDGE_X: - case INTEL_FAM6_IVYBRIDGE_X: - do_rapl = RAPL_PKG_ALL | RAPL_CORE_ALL | RAPL_DRAM_ALL; - break; - case INTEL_FAM6_ATOM_SILVERMONT: /* BYT */ - case INTEL_FAM6_ATOM_SILVERMONT_D: /* AVN */ - do_rapl = RAPL_PKG | RAPL_CORE; - break; - case INTEL_FAM6_ATOM_GOLDMONT_D: /* DNV */ - do_rapl = RAPL_PKG_ALL | RAPL_DRAM_ALL | RAPL_CORE_ENERGY_STATUS; - break; - default: - return; - } - if (rapl_joules) { - if (do_rapl & RAPL_PKG_ENERGY_STATUS) + if (platform->rapl_msrs & RAPL_PKG_ENERGY_STATUS) BIC_PRESENT(BIC_Pkg_J); - if (do_rapl & RAPL_CORE_ENERGY_STATUS) + if (platform->rapl_msrs & RAPL_CORE_ENERGY_STATUS) BIC_PRESENT(BIC_Cor_J); - if (do_rapl & RAPL_DRAM_ENERGY_STATUS) + if (platform->rapl_msrs & RAPL_DRAM_ENERGY_STATUS) BIC_PRESENT(BIC_RAM_J); - if (do_rapl & RAPL_GFX_ENERGY_STATUS) + if (platform->rapl_msrs & RAPL_GFX_ENERGY_STATUS) BIC_PRESENT(BIC_GFX_J); } else { - if (do_rapl & RAPL_PKG_ENERGY_STATUS) + if (platform->rapl_msrs & RAPL_PKG_ENERGY_STATUS) BIC_PRESENT(BIC_PkgWatt); - if (do_rapl & RAPL_CORE_ENERGY_STATUS) + if (platform->rapl_msrs & RAPL_CORE_ENERGY_STATUS) BIC_PRESENT(BIC_CorWatt); - if (do_rapl & RAPL_DRAM_ENERGY_STATUS) + if (platform->rapl_msrs & RAPL_DRAM_ENERGY_STATUS) BIC_PRESENT(BIC_RAMWatt); - if (do_rapl & RAPL_GFX_ENERGY_STATUS) + if (platform->rapl_msrs & RAPL_GFX_ENERGY_STATUS) BIC_PRESENT(BIC_GFXWatt); } - if (do_rapl & RAPL_PKG_PERF_STATUS) + if (platform->rapl_msrs & RAPL_PKG_PERF_STATUS) BIC_PRESENT(BIC_PKG__); - if (do_rapl & RAPL_DRAM_PERF_STATUS) + if (platform->rapl_msrs & RAPL_DRAM_PERF_STATUS) BIC_PRESENT(BIC_RAM__); /* units on package 0, verify later other packages match */ @@ -4900,22 +4890,10 @@ void rapl_probe_intel(unsigned int family, unsigned int model) void rapl_probe_amd(unsigned int family, unsigned int model) { unsigned long long msr; - unsigned int eax, ebx, ecx, edx; - unsigned int has_rapl = 0; double tdp; UNUSED(model); - if (max_extended_level >= 0x80000007) { - __cpuid(0x80000007, eax, ebx, ecx, edx); - /* RAPL (Fam 17h+) */ - has_rapl = edx & (1 << 14); - } - - if (!has_rapl || family < 0x17) - return; - - do_rapl = RAPL_AMD_F17H | RAPL_PER_CORE_ENERGY; if (rapl_joules) { BIC_PRESENT(BIC_Pkg_J); BIC_PRESENT(BIC_Cor_J); @@ -4941,12 +4919,15 @@ void rapl_probe_amd(unsigned int family, unsigned int model) /* * rapl_probe() * - * sets do_rapl, rapl_power_units, rapl_energy_units, rapl_time_units + * sets rapl_power_units, rapl_energy_units, rapl_time_units */ void rapl_probe(unsigned int family, unsigned int model) { + if (!platform->rapl_msrs) + return; + if (genuine_intel) - rapl_probe_intel(family, model); + rapl_probe_intel(model); if (authentic_amd || hygon_genuine) rapl_probe_amd(family, model); } @@ -5040,7 +5021,7 @@ int print_rapl(struct thread_data *t, struct core_data *c, struct pkg_data *p) UNUSED(c); UNUSED(p); - if (!do_rapl) + if (!platform->rapl_msrs) return 0; /* RAPL counters are per package, so print only for 1st thread/package */ @@ -5053,7 +5034,7 @@ int print_rapl(struct thread_data *t, struct core_data *c, struct pkg_data *p) return -1; } - if (do_rapl & RAPL_AMD_F17H) { + if (platform->rapl_msrs & RAPL_AMD_F17H) { msr_name = "MSR_RAPL_PWR_UNIT"; if (get_msr(cpu, MSR_RAPL_PWR_UNIT, &msr)) return -1; @@ -5066,7 +5047,7 @@ int print_rapl(struct thread_data *t, struct core_data *c, struct pkg_data *p) fprintf(outf, "cpu%d: %s: 0x%08llx (%f Watts, %f Joules, %f sec.)\n", cpu, msr_name, msr, rapl_power_units, rapl_energy_units, rapl_time_units); - if (do_rapl & RAPL_PKG_POWER_INFO) { + if (platform->rapl_msrs & RAPL_PKG_POWER_INFO) { if (get_msr(cpu, MSR_PKG_POWER_INFO, &msr)) return -5; @@ -5079,7 +5060,7 @@ int print_rapl(struct thread_data *t, struct core_data *c, struct pkg_data *p) ((msr >> 48) & RAPL_TIME_GRANULARITY) * rapl_time_units); } - if (do_rapl & RAPL_PKG) { + if (platform->rapl_msrs & RAPL_PKG) { if (get_msr(cpu, MSR_PKG_POWER_LIMIT, &msr)) return -9; @@ -5103,7 +5084,7 @@ int print_rapl(struct thread_data *t, struct core_data *c, struct pkg_data *p) cpu, ((msr >> 0) & 0x1FFF) * rapl_power_units, (msr >> 31) & 1 ? "" : "UN"); } - if (do_rapl & RAPL_DRAM_POWER_INFO) { + if (platform->rapl_msrs & RAPL_DRAM_POWER_INFO) { if (get_msr(cpu, MSR_DRAM_POWER_INFO, &msr)) return -6; @@ -5114,7 +5095,7 @@ int print_rapl(struct thread_data *t, struct core_data *c, struct pkg_data *p) ((msr >> 32) & RAPL_POWER_GRANULARITY) * rapl_power_units, ((msr >> 48) & RAPL_TIME_GRANULARITY) * rapl_time_units); } - if (do_rapl & RAPL_DRAM) { + if (platform->rapl_msrs & RAPL_DRAM) { if (get_msr(cpu, MSR_DRAM_POWER_LIMIT, &msr)) return -9; fprintf(outf, "cpu%d: MSR_DRAM_POWER_LIMIT: 0x%08llx (%slocked)\n", @@ -5122,20 +5103,20 @@ int print_rapl(struct thread_data *t, struct core_data *c, struct pkg_data *p) print_power_limit_msr(cpu, msr, "DRAM Limit"); } - if (do_rapl & RAPL_CORE_POLICY) { + if (platform->rapl_msrs & RAPL_CORE_POLICY) { if (get_msr(cpu, MSR_PP0_POLICY, &msr)) return -7; fprintf(outf, "cpu%d: MSR_PP0_POLICY: %lld\n", cpu, msr & 0xF); } - if (do_rapl & RAPL_CORE_POWER_LIMIT) { + if (platform->rapl_msrs & RAPL_CORE_POWER_LIMIT) { if (get_msr(cpu, MSR_PP0_POWER_LIMIT, &msr)) return -9; fprintf(outf, "cpu%d: MSR_PP0_POWER_LIMIT: 0x%08llx (%slocked)\n", cpu, msr, (msr >> 31) & 1 ? "" : "UN"); print_power_limit_msr(cpu, msr, "Cores Limit"); } - if (do_rapl & RAPL_GFX) { + if (platform->rapl_msrs & RAPL_GFX) { if (get_msr(cpu, MSR_PP1_POLICY, &msr)) return -8; -- cgit v1.2.3 From e338831b14d2da921348c8c4055b9f2c94effe73 Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Sun, 27 Aug 2023 21:37:46 +0800 Subject: tools/power/turbostat: Abstract Per Core RAPL support Abstract the support for Per Core RAPL. Signed-off-by: Zhang Rui Reviewed-by: Len Brown --- tools/power/x86/turbostat/turbostat.c | 24 +++++++++++------------- 1 file changed, 11 insertions(+), 13 deletions(-) diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c index 90e1abe96dd5..6314c40dc15b 100644 --- a/tools/power/x86/turbostat/turbostat.c +++ b/tools/power/x86/turbostat/turbostat.c @@ -245,7 +245,6 @@ double tsc_tweak = 1.0; unsigned int show_pkg_only; unsigned int show_core_only; char *output_buffer, *outp; -unsigned int do_rapl; unsigned int do_dts; unsigned int do_ptm; unsigned int do_ipc; @@ -289,6 +288,7 @@ struct platform_features { int trl_msrs; /* MSR_TURBO_RATIO_LIMIT/LIMIT1/LIMIT2/SECONDARY, Atom TRL MSRs */ int plr_msrs; /* MSR_CORE/GFX/RING_PERF_LIMIT_REASONS */ int rapl_msrs; /* RAPL PKG/DRAM/CORE/GFX MSRs, AMD RAPL MSRs */ + bool has_per_core_rapl; /* Indicates cores energy collection is per-core, not per-package. AMD specific for now */ int tcc_offset_bits; /* TCC Offset bits in MSR_IA32_TEMPERATURE_TARGET */ }; @@ -378,7 +378,6 @@ enum rapl_msrs { RAPL_AMD_PWR_UNIT = BIT(14), /* 0xc0010299 MSR_AMD_RAPL_POWER_UNIT */ RAPL_AMD_CORE_ENERGY_STAT = BIT(15), /* 0xc001029a MSR_AMD_CORE_ENERGY_STATUS */ RAPL_AMD_PKG_ENERGY_STAT = BIT(16), /* 0xc001029b MSR_AMD_PKG_ENERGY_STATUS */ - RAPL_PER_CORE_ENERGY = BIT(17), /* Indicates cores energy collection is per-core, not per-package. */ }; #define RAPL_PKG (RAPL_PKG_ENERGY_STATUS | RAPL_PKG_POWER_LIMIT) @@ -680,6 +679,7 @@ static const struct platform_features amd_features = { static const struct platform_features amd_features_with_rapl = { .rapl_msrs = RAPL_AMD_F17H, + .has_per_core_rapl = 1, }; static const struct platform_data turbostat_pdata[] = { @@ -763,10 +763,8 @@ void probe_platform_features(unsigned int family, unsigned int model) __cpuid(0x80000007, eax, ebx, ecx, edx); /* RAPL (Fam 17h+) */ - if ((edx & (1 << 14)) && family >= 0x17) { + if ((edx & (1 << 14)) && family >= 0x17) platform = &amd_features_with_rapl; - do_rapl = RAPL_PER_CORE_ENERGY; - } } return; } @@ -1371,10 +1369,10 @@ void print_header(char *delim) outp += sprintf(outp, "%sCoreThr", (printed++ ? delim : "")); if (platform->rapl_msrs && !rapl_joules) { - if (DO_BIC(BIC_CorWatt) && (do_rapl & RAPL_PER_CORE_ENERGY)) + if (DO_BIC(BIC_CorWatt) && platform->has_per_core_rapl) outp += sprintf(outp, "%sCorWatt", (printed++ ? delim : "")); } else if (platform->rapl_msrs && rapl_joules) { - if (DO_BIC(BIC_Cor_J) && (do_rapl & RAPL_PER_CORE_ENERGY)) + if (DO_BIC(BIC_Cor_J) && platform->has_per_core_rapl) outp += sprintf(outp, "%sCor_J", (printed++ ? delim : "")); } @@ -1435,7 +1433,7 @@ void print_header(char *delim) if (platform->rapl_msrs && !rapl_joules) { if (DO_BIC(BIC_PkgWatt)) outp += sprintf(outp, "%sPkgWatt", (printed++ ? delim : "")); - if (DO_BIC(BIC_CorWatt) && !(do_rapl & RAPL_PER_CORE_ENERGY)) + if (DO_BIC(BIC_CorWatt) && !platform->has_per_core_rapl) outp += sprintf(outp, "%sCorWatt", (printed++ ? delim : "")); if (DO_BIC(BIC_GFXWatt)) outp += sprintf(outp, "%sGFXWatt", (printed++ ? delim : "")); @@ -1448,7 +1446,7 @@ void print_header(char *delim) } else if (platform->rapl_msrs && rapl_joules) { if (DO_BIC(BIC_Pkg_J)) outp += sprintf(outp, "%sPkg_J", (printed++ ? delim : "")); - if (DO_BIC(BIC_Cor_J) && !(do_rapl & RAPL_PER_CORE_ENERGY)) + if (DO_BIC(BIC_Cor_J) && !platform->has_per_core_rapl) outp += sprintf(outp, "%sCor_J", (printed++ ? delim : "")); if (DO_BIC(BIC_GFX_J)) outp += sprintf(outp, "%sGFX_J", (printed++ ? delim : "")); @@ -1750,10 +1748,10 @@ int format_counters(struct thread_data *t, struct core_data *c, struct pkg_data fmt8 = "%s%.2f"; - if (DO_BIC(BIC_CorWatt) && (do_rapl & RAPL_PER_CORE_ENERGY)) + if (DO_BIC(BIC_CorWatt) && platform->has_per_core_rapl) outp += sprintf(outp, fmt8, (printed++ ? delim : ""), c->core_energy * rapl_energy_units / interval_float); - if (DO_BIC(BIC_Cor_J) && (do_rapl & RAPL_PER_CORE_ENERGY)) + if (DO_BIC(BIC_Cor_J) && platform->has_per_core_rapl) outp += sprintf(outp, fmt8, (printed++ ? delim : ""), c->core_energy * rapl_energy_units); /* print per-package data only for 1st core in package */ @@ -1818,7 +1816,7 @@ int format_counters(struct thread_data *t, struct core_data *c, struct pkg_data outp += sprintf(outp, fmt8, (printed++ ? delim : ""), p->energy_pkg * rapl_energy_units / interval_float); - if (DO_BIC(BIC_CorWatt) && !(do_rapl & RAPL_PER_CORE_ENERGY)) + if (DO_BIC(BIC_CorWatt) && !platform->has_per_core_rapl) outp += sprintf(outp, fmt8, (printed++ ? delim : ""), p->energy_cores * rapl_energy_units / interval_float); if (DO_BIC(BIC_GFXWatt)) @@ -1830,7 +1828,7 @@ int format_counters(struct thread_data *t, struct core_data *c, struct pkg_data p->energy_dram * rapl_dram_energy_units / interval_float); if (DO_BIC(BIC_Pkg_J)) outp += sprintf(outp, fmt8, (printed++ ? delim : ""), p->energy_pkg * rapl_energy_units); - if (DO_BIC(BIC_Cor_J) && !(do_rapl & RAPL_PER_CORE_ENERGY)) + if (DO_BIC(BIC_Cor_J) && !platform->has_per_core_rapl) outp += sprintf(outp, fmt8, (printed++ ? delim : ""), p->energy_cores * rapl_energy_units); if (DO_BIC(BIC_GFX_J)) outp += sprintf(outp, fmt8, (printed++ ? delim : ""), p->energy_gfx * rapl_energy_units); -- cgit v1.2.3 From 6d35b8c4a661c849361239fe316035ea952606a3 Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Sat, 22 Apr 2023 11:59:04 +0800 Subject: tools/power/turbostat: Abstract RAPL divisor support INTEL_FAM6_ATOM_SILVERMONT model needs a divisor to convert the raw Energy Units value from MSR_RAPL_POWER_UNIT. Abstract the support for RAPL divisor. Delete CPU model check in rapl_probe_intel(). Signed-off-by: Zhang Rui Reviewed-by: Len Brown --- tools/power/x86/turbostat/turbostat.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c index 6314c40dc15b..a31724335671 100644 --- a/tools/power/x86/turbostat/turbostat.c +++ b/tools/power/x86/turbostat/turbostat.c @@ -289,6 +289,7 @@ struct platform_features { int plr_msrs; /* MSR_CORE/GFX/RING_PERF_LIMIT_REASONS */ int rapl_msrs; /* RAPL PKG/DRAM/CORE/GFX MSRs, AMD RAPL MSRs */ bool has_per_core_rapl; /* Indicates cores energy collection is per-core, not per-package. AMD specific for now */ + bool has_rapl_divisor; /* Divisor for Energy unit raw value from MSR_RAPL_POWER_UNIT */ int tcc_offset_bits; /* TCC Offset bits in MSR_IA32_TEMPERATURE_TARGET */ }; @@ -595,6 +596,7 @@ static const struct platform_features slv_features = { .cst_limit = CST_LIMIT_SLV, .trl_msrs = TRL_ATOM, .rapl_msrs = RAPL_PKG | RAPL_CORE, + .has_rapl_divisor = 1, }; static const struct platform_features slvd_features = { @@ -4865,7 +4867,7 @@ void rapl_probe_intel(unsigned int model) return; rapl_power_units = 1.0 / (1 << (msr & 0xF)); - if (model == INTEL_FAM6_ATOM_SILVERMONT) + if (platform->has_rapl_divisor) rapl_energy_units = 1.0 * (1 << (msr >> 8 & 0x1F)) / 1000000; else rapl_energy_units = 1.0 / (1 << (msr >> 8 & 0x1F)); -- cgit v1.2.3 From 9e6f35159cdef148c711d2fb7d5fd2b2b6fb772d Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Sat, 22 Apr 2023 12:21:58 +0800 Subject: tools/power/turbostat: Abstract fixed DRAM Energy unit support Abstract the support for fixed Dram domain energy unit. Delete rapl_dram_energy_units_probe() CPU model check. Signed-off-by: Zhang Rui Reviewed-by: Len Brown --- tools/power/x86/turbostat/turbostat.c | 31 ++++++++++--------------------- 1 file changed, 10 insertions(+), 21 deletions(-) diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c index a31724335671..a26ae5a2e2bd 100644 --- a/tools/power/x86/turbostat/turbostat.c +++ b/tools/power/x86/turbostat/turbostat.c @@ -290,6 +290,7 @@ struct platform_features { int rapl_msrs; /* RAPL PKG/DRAM/CORE/GFX MSRs, AMD RAPL MSRs */ bool has_per_core_rapl; /* Indicates cores energy collection is per-core, not per-package. AMD specific for now */ bool has_rapl_divisor; /* Divisor for Energy unit raw value from MSR_RAPL_POWER_UNIT */ + bool has_fixed_rapl_unit; /* Fixed Energy Unit used for DRAM RAPL Domain */ int tcc_offset_bits; /* TCC Offset bits in MSR_IA32_TEMPERATURE_TARGET */ }; @@ -471,6 +472,7 @@ static const struct platform_features hsx_features = { .trl_msrs = TRL_BASE | TRL_LIMIT1 | TRL_LIMIT2, .plr_msrs = PLR_CORE | PLR_RING, .rapl_msrs = RAPL_PKG_ALL | RAPL_DRAM_ALL, + .has_fixed_rapl_unit = 1, }; static const struct platform_features hswl_features = { @@ -529,6 +531,7 @@ static const struct platform_features bdx_features = { .has_cst_auto_convension = 1, .trl_msrs = TRL_BASE, .rapl_msrs = RAPL_PKG_ALL | RAPL_DRAM_ALL, + .has_fixed_rapl_unit = 1, }; static const struct platform_features skl_features = { @@ -566,6 +569,7 @@ static const struct platform_features skx_features = { .has_cst_auto_convension = 1, .trl_msrs = TRL_BASE | TRL_CORECOUNT, .rapl_msrs = RAPL_PKG_ALL | RAPL_DRAM_ALL, + .has_fixed_rapl_unit = 1, }; static const struct platform_features icx_features = { @@ -577,6 +581,7 @@ static const struct platform_features icx_features = { .cst_limit = CST_LIMIT_ICX, .trl_msrs = TRL_BASE | TRL_CORECOUNT, .rapl_msrs = RAPL_PKG_ALL | RAPL_DRAM_ALL, + .has_fixed_rapl_unit = 1, }; static const struct platform_features spr_features = { @@ -671,6 +676,7 @@ static const struct platform_features knl_features = { .cst_limit = CST_LIMIT_KNL, .trl_msrs = TRL_KNL, .rapl_msrs = RAPL_PKG_ALL | RAPL_DRAM_ALL, + .has_fixed_rapl_unit = 1, }; static const struct platform_features default_features = { @@ -4811,26 +4817,6 @@ double get_tdp_amd(unsigned int family) return 280.0; } -/* - * rapl_dram_energy_units_probe() - * Energy units are either hard-coded, or come from RAPL Energy Unit MSR. - */ -static double rapl_dram_energy_units_probe(int model, double rapl_energy_units) -{ - /* only called for genuine_intel, family 6 */ - - switch (model) { - case INTEL_FAM6_HASWELL_X: /* HSX */ - case INTEL_FAM6_BROADWELL_X: /* BDX */ - case INTEL_FAM6_SKYLAKE_X: /* SKX */ - case INTEL_FAM6_XEON_PHI_KNL: /* KNL */ - case INTEL_FAM6_ICELAKE_X: /* ICX */ - return (rapl_dram_energy_units = 15.3 / 1000000); - default: - return (rapl_energy_units); - } -} - void rapl_probe_intel(unsigned int model) { unsigned long long msr; @@ -4872,7 +4858,10 @@ void rapl_probe_intel(unsigned int model) else rapl_energy_units = 1.0 / (1 << (msr >> 8 & 0x1F)); - rapl_dram_energy_units = rapl_dram_energy_units_probe(model, rapl_energy_units); + if (platform->has_fixed_rapl_unit) + rapl_dram_energy_units = (15.3 / 1000000); + else + rapl_dram_energy_units = rapl_energy_units; time_unit = msr >> 16 & 0xF; if (time_unit == 0) -- cgit v1.2.3 From 7c60409382a4be05d601e0b45db7b0166845b0cf Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Sun, 27 Aug 2023 10:21:10 +0800 Subject: tools/power/turbostat: Abstract hardcoded TDP value Different hardcoded TDP values are used when TDP can not be retrieved from the hardware. Abstract hardcoded TDP value. Delete CPU model checks in get_tdp_intel(). Signed-off-by: Zhang Rui Reviewed-by: Len Brown --- tools/power/x86/turbostat/turbostat.c | 26 ++++++++++++++++---------- 1 file changed, 16 insertions(+), 10 deletions(-) diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c index a26ae5a2e2bd..45698c3a9e72 100644 --- a/tools/power/x86/turbostat/turbostat.c +++ b/tools/power/x86/turbostat/turbostat.c @@ -291,6 +291,7 @@ struct platform_features { bool has_per_core_rapl; /* Indicates cores energy collection is per-core, not per-package. AMD specific for now */ bool has_rapl_divisor; /* Divisor for Energy unit raw value from MSR_RAPL_POWER_UNIT */ bool has_fixed_rapl_unit; /* Fixed Energy Unit used for DRAM RAPL Domain */ + int rapl_quirk_tdp; /* Hardcoded TDP value when cannot be retrieved from hardware */ int tcc_offset_bits; /* TCC Offset bits in MSR_IA32_TEMPERATURE_TARGET */ }; @@ -602,6 +603,7 @@ static const struct platform_features slv_features = { .trl_msrs = TRL_ATOM, .rapl_msrs = RAPL_PKG | RAPL_CORE, .has_rapl_divisor = 1, + .rapl_quirk_tdp = 30, }; static const struct platform_features slvd_features = { @@ -611,6 +613,7 @@ static const struct platform_features slvd_features = { .cst_limit = CST_LIMIT_SLV, .trl_msrs = TRL_BASE, .rapl_msrs = RAPL_PKG | RAPL_CORE, + .rapl_quirk_tdp = 30, }; static const struct platform_features amt_features = { @@ -688,6 +691,7 @@ static const struct platform_features amd_features = { static const struct platform_features amd_features_with_rapl = { .rapl_msrs = RAPL_AMD_F17H, .has_per_core_rapl = 1, + .rapl_quirk_tdp = 280, /* This is the max stock TDP of HEDT/Server Fam17h+ chips */ }; static const struct platform_data turbostat_pdata[] = { @@ -4792,29 +4796,31 @@ int print_perf_limit(struct thread_data *t, struct core_data *c, struct pkg_data #define RAPL_POWER_GRANULARITY 0x7FFF /* 15 bit power granularity */ #define RAPL_TIME_GRANULARITY 0x3F /* 6 bit time granularity */ +double get_quirk_tdp(void) +{ + if (platform->rapl_quirk_tdp) + return platform->rapl_quirk_tdp; + + return 135.0; +} + double get_tdp_intel(unsigned int model) { unsigned long long msr; + UNUSED(model); + if (platform->rapl_msrs & RAPL_PKG_POWER_INFO) if (!get_msr(base_cpu, MSR_PKG_POWER_INFO, &msr)) return ((msr >> 0) & RAPL_POWER_GRANULARITY) * rapl_power_units; - - switch (model) { - case INTEL_FAM6_ATOM_SILVERMONT: - case INTEL_FAM6_ATOM_SILVERMONT_D: - return 30.0; - default: - return 135.0; - } + return get_quirk_tdp(); } double get_tdp_amd(unsigned int family) { UNUSED(family); - /* This is the max stock TDP of HEDT/Server Fam17h+ chips */ - return 280.0; + return get_quirk_tdp(); } void rapl_probe_intel(unsigned int model) -- cgit v1.2.3 From bf1ad57c3f92c551dbfdcecd49797253f55cb7c1 Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Sun, 27 Aug 2023 10:28:04 +0800 Subject: tools/power/turbostat: Remove unused family/model parameters for RAPL functions RAPL probing can be done without family/model checking. Remove these parameters in rapl probe functions. Signed-off-by: Zhang Rui Reviewed-by: Len Brown --- tools/power/x86/turbostat/turbostat.c | 26 ++++++++++---------------- 1 file changed, 10 insertions(+), 16 deletions(-) diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c index 45698c3a9e72..44d7321b004e 100644 --- a/tools/power/x86/turbostat/turbostat.c +++ b/tools/power/x86/turbostat/turbostat.c @@ -4804,26 +4804,22 @@ double get_quirk_tdp(void) return 135.0; } -double get_tdp_intel(unsigned int model) +double get_tdp_intel(void) { unsigned long long msr; - UNUSED(model); - if (platform->rapl_msrs & RAPL_PKG_POWER_INFO) if (!get_msr(base_cpu, MSR_PKG_POWER_INFO, &msr)) return ((msr >> 0) & RAPL_POWER_GRANULARITY) * rapl_power_units; return get_quirk_tdp(); } -double get_tdp_amd(unsigned int family) +double get_tdp_amd(void) { - UNUSED(family); - return get_quirk_tdp(); } -void rapl_probe_intel(unsigned int model) +void rapl_probe_intel(void) { unsigned long long msr; unsigned int time_unit; @@ -4875,20 +4871,18 @@ void rapl_probe_intel(unsigned int model) rapl_time_units = 1.0 / (1 << (time_unit)); - tdp = get_tdp_intel(model); + tdp = get_tdp_intel(); rapl_joule_counter_range = 0xFFFFFFFF * rapl_energy_units / tdp; if (!quiet) fprintf(outf, "RAPL: %.0f sec. Joule Counter Range, at %.0f Watts\n", rapl_joule_counter_range, tdp); } -void rapl_probe_amd(unsigned int family, unsigned int model) +void rapl_probe_amd(void) { unsigned long long msr; double tdp; - UNUSED(model); - if (rapl_joules) { BIC_PRESENT(BIC_Pkg_J); BIC_PRESENT(BIC_Cor_J); @@ -4904,7 +4898,7 @@ void rapl_probe_amd(unsigned int family, unsigned int model) rapl_energy_units = ldexp(1.0, -(msr >> 8 & 0x1f)); rapl_power_units = ldexp(1.0, -(msr & 0xf)); - tdp = get_tdp_amd(family); + tdp = get_tdp_amd(); rapl_joule_counter_range = 0xFFFFFFFF * rapl_energy_units / tdp; if (!quiet) @@ -4916,15 +4910,15 @@ void rapl_probe_amd(unsigned int family, unsigned int model) * * sets rapl_power_units, rapl_energy_units, rapl_time_units */ -void rapl_probe(unsigned int family, unsigned int model) +void rapl_probe(void) { if (!platform->rapl_msrs) return; if (genuine_intel) - rapl_probe_intel(model); + rapl_probe_intel(); if (authentic_amd || hygon_genuine) - rapl_probe_amd(family, model); + rapl_probe_amd(); } void prewake_cstate_probe(unsigned int family, unsigned int model) @@ -5828,7 +5822,7 @@ void process_cpuid() if (!quiet && has_slv_msrs(family, model)) decode_c6_demotion_policy_msr(); - rapl_probe(family, model); + rapl_probe(); prewake_cstate_probe(family, model); if (!quiet) -- cgit v1.2.3 From 485a017c45200ed82518f6cdeea554f77e9a0562 Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Sun, 27 Aug 2023 10:37:23 +0800 Subject: tools/power/turbostat: Abstract TSC tweak support On some models, the CPU base frequency is different from the TSC frequency, and the aperf/mperf counters are running at CPU base frequency instead of TSC frequency. Abstract support for TSC tweak. Given that tsc_tweak depends on base_hz, move the code to probe_bclk() after base_hz is available. Signed-off-by: Zhang Rui Reviewed-by: Len Brown --- tools/power/x86/turbostat/turbostat.c | 15 +++++++-------- 1 file changed, 7 insertions(+), 8 deletions(-) diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c index 44d7321b004e..05385fabc83a 100644 --- a/tools/power/x86/turbostat/turbostat.c +++ b/tools/power/x86/turbostat/turbostat.c @@ -293,6 +293,7 @@ struct platform_features { bool has_fixed_rapl_unit; /* Fixed Energy Unit used for DRAM RAPL Domain */ int rapl_quirk_tdp; /* Hardcoded TDP value when cannot be retrieved from hardware */ int tcc_offset_bits; /* TCC Offset bits in MSR_IA32_TEMPERATURE_TARGET */ + bool enable_tsc_tweak; /* Use CPU Base freq instead of TSC freq for aperf/mperf counter */ }; struct platform_data { @@ -546,6 +547,7 @@ static const struct platform_features skl_features = { .trl_msrs = TRL_BASE, .tcc_offset_bits = 6, .rapl_msrs = RAPL_PKG_ALL | RAPL_CORE_ALL | RAPL_DRAM | RAPL_DRAM_PERF_STATUS | RAPL_GFX, + .enable_tsc_tweak = 1, }; static const struct platform_features cnl_features = { @@ -558,6 +560,7 @@ static const struct platform_features cnl_features = { .trl_msrs = TRL_BASE, .tcc_offset_bits = 6, .rapl_msrs = RAPL_PKG_ALL | RAPL_CORE_ALL | RAPL_DRAM | RAPL_DRAM_PERF_STATUS | RAPL_GFX, + .enable_tsc_tweak = 1, }; static const struct platform_features skx_features = { @@ -660,6 +663,7 @@ static const struct platform_features tmt_features = { .cst_limit = CST_LIMIT_GMT, .trl_msrs = TRL_BASE, .rapl_msrs = RAPL_PKG_ALL | RAPL_CORE_ALL | RAPL_DRAM | RAPL_DRAM_PERF_STATUS | RAPL_GFX, + .enable_tsc_tweak = 1, }; static const struct platform_features tmtd_features = { @@ -2934,11 +2938,6 @@ void probe_cst_limit(void) pkg_cstate_limit = pkg_cstate_limits[msr & 0xF]; } -static void calculate_tsc_tweak() -{ - tsc_tweak = base_hz / tsc_hz; -} - void prewake_cstate_probe(unsigned int family, unsigned int model); static void dump_platform_info(void) @@ -4198,6 +4197,9 @@ void probe_bclk(void) base_hz = base_ratio * bclk * 1000000; has_base_hz = 1; + + if (platform->enable_tsc_tweak) + tsc_tweak = base_hz / tsc_hz; } /* @@ -5836,9 +5838,6 @@ void process_cpuid() if (!quiet) dump_sysfs_pstate_config(); - if (has_skl_msrs(family, model) || is_ehl(family, model)) - calculate_tsc_tweak(); - if (!access("/sys/class/drm/card0/power/rc6_residency_ms", R_OK)) BIC_PRESENT(BIC_GFX_rc6); -- cgit v1.2.3 From 3c6a17b8ae44b0116e303402803c173fe2a3da92 Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Sun, 27 Aug 2023 22:37:37 +0800 Subject: tools/power/turbostat: Add skeleton support for cstate enumeration Add skeleton support for cstate enumeration. Note that the previous logic may override the cstate setting for multiple times for different reasons. The conversion to new cstate enumeration must be done step by step following the previous code order strictly. Signed-off-by: Zhang Rui Reviewed-by: Len Brown --- tools/power/x86/turbostat/turbostat.c | 57 ++++++++++++++++++++++++++++++++++- 1 file changed, 56 insertions(+), 1 deletion(-) diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c index 05385fabc83a..6a49eb941fe0 100644 --- a/tools/power/x86/turbostat/turbostat.c +++ b/tools/power/x86/turbostat/turbostat.c @@ -283,6 +283,7 @@ struct platform_features { bool has_config_tdp; /* MSR_CONFIG_TDP_NOMINAL/LEVEL_1/LEVEL_2/CONTROL, MSR_TURBO_ACTIVATION_RATIO */ int bclk_freq; /* CPU base clock */ int crystal_freq; /* Crystal clock to use when not available from CPUID.15 */ + int supported_cstates; /* Core cstates and Package cstates supported */ int cst_limit; /* MSR_PKG_CST_CONFIG_CONTROL */ bool has_cst_auto_convension; /* AUTOMATIC_CSTATE_CONVERSION bit in MSR_PKG_CST_CONFIG_CONTROL */ int trl_msrs; /* MSR_TURBO_RATIO_LIMIT/LIMIT1/LIMIT2/SECONDARY, Atom TRL MSRs */ @@ -396,6 +397,21 @@ enum rapl_msrs { #define RAPL_AMD_F17H (RAPL_AMD_PWR_UNIT | RAPL_AMD_CORE_ENERGY_STAT | RAPL_AMD_PKG_ENERGY_STAT) +/* For Cstates */ +enum cstates { + CC1 = BIT(0), + CC3 = BIT(1), + CC6 = BIT(2), + CC7 = BIT(3), + PC2 = BIT(4), + PC3 = BIT(5), + PC6 = BIT(6), + PC7 = BIT(7), + PC8 = BIT(8), + PC9 = BIT(9), + PC10 = BIT(10), +}; + static const struct platform_features nhm_features = { .has_msr_misc_pwr_mgmt = 1, .has_nhm_msrs = 1, @@ -5560,6 +5576,44 @@ void linux_perf_init(void) BIC_PRESENT(BIC_IPC); } +void probe_cstates(void) +{ + probe_cst_limit(); + + if (platform->supported_cstates & CC1) + BIC_PRESENT(BIC_CPU_c1); + + if (platform->supported_cstates & CC3) + BIC_PRESENT(BIC_CPU_c3); + + if (platform->supported_cstates & CC6) + BIC_PRESENT(BIC_CPU_c6); + + if (platform->supported_cstates & CC7) + BIC_PRESENT(BIC_CPU_c7); + + if (platform->supported_cstates & PC2 && (pkg_cstate_limit >= PCL__2)) + BIC_PRESENT(BIC_Pkgpc2); + + if (platform->supported_cstates & PC3 && (pkg_cstate_limit >= PCL__3)) + BIC_PRESENT(BIC_Pkgpc3); + + if (platform->supported_cstates & PC6 && (pkg_cstate_limit >= PCL__6)) + BIC_PRESENT(BIC_Pkgpc6); + + if (platform->supported_cstates & PC7 && (pkg_cstate_limit >= PCL__7)) + BIC_PRESENT(BIC_Pkgpc7); + + if (platform->supported_cstates & PC8 && (pkg_cstate_limit >= PCL__8)) + BIC_PRESENT(BIC_Pkgpc8); + + if (platform->supported_cstates & PC9 && (pkg_cstate_limit >= PCL__9)) + BIC_PRESENT(BIC_Pkgpc9); + + if (platform->supported_cstates & PC10 && (pkg_cstate_limit >= PCL_10)) + BIC_PRESENT(BIC_Pkgpc10); +} + void process_cpuid() { unsigned int eax, ebx, ecx, edx; @@ -5741,7 +5795,8 @@ void process_cpuid() BIC_PRESENT(BIC_IRQ); BIC_PRESENT(BIC_TSC_MHz); - probe_cst_limit(); + probe_cstates(); + if (platform->has_nhm_msrs) { BIC_PRESENT(BIC_CPU_c1); BIC_PRESENT(BIC_CPU_c3); -- cgit v1.2.3 From ce7ddf8af2f96a8a7af4cc2273843518c5810166 Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Fri, 8 Sep 2023 23:16:27 +0800 Subject: tools/power/turbostat: Adjust cstate for models with .has_nhm_msrs set Enable CC1/CC3/CC6 for platforms with .has_nhm_msrs set. Signed-off-by: Zhang Rui Reviewed-by: Len Brown --- tools/power/x86/turbostat/turbostat.c | 33 ++++++++++++++++++++++++++++----- 1 file changed, 28 insertions(+), 5 deletions(-) diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c index 6a49eb941fe0..c7345e0c5185 100644 --- a/tools/power/x86/turbostat/turbostat.c +++ b/tools/power/x86/turbostat/turbostat.c @@ -416,6 +416,7 @@ static const struct platform_features nhm_features = { .has_msr_misc_pwr_mgmt = 1, .has_nhm_msrs = 1, .bclk_freq = BCLK_133MHZ, + .supported_cstates = CC1 | CC3 | CC6, .cst_limit = CST_LIMIT_NHM, .trl_msrs = TRL_BASE, }; @@ -424,6 +425,7 @@ static const struct platform_features nhx_features = { .has_msr_misc_pwr_mgmt = 1, .has_nhm_msrs = 1, .bclk_freq = BCLK_133MHZ, + .supported_cstates = CC1 | CC3 | CC6, .cst_limit = CST_LIMIT_NHM, }; @@ -432,6 +434,7 @@ static const struct platform_features snb_features = { .has_msr_misc_pwr_mgmt = 1, .has_nhm_msrs = 1, .bclk_freq = BCLK_100MHZ, + .supported_cstates = CC1 | CC3 | CC6, .cst_limit = CST_LIMIT_SNB, .trl_msrs = TRL_BASE, .rapl_msrs = RAPL_PKG | RAPL_CORE_ALL | RAPL_GFX | RAPL_PKG_POWER_INFO, @@ -442,6 +445,7 @@ static const struct platform_features snx_features = { .has_msr_misc_pwr_mgmt = 1, .has_nhm_msrs = 1, .bclk_freq = BCLK_100MHZ, + .supported_cstates = CC1 | CC3 | CC6, .cst_limit = CST_LIMIT_SNB, .trl_msrs = TRL_BASE, .rapl_msrs = RAPL_PKG_ALL | RAPL_CORE_ALL | RAPL_DRAM_ALL, @@ -453,6 +457,7 @@ static const struct platform_features ivb_features = { .has_nhm_msrs = 1, .has_config_tdp = 1, .bclk_freq = BCLK_100MHZ, + .supported_cstates = CC1 | CC3 | CC6, .cst_limit = CST_LIMIT_SNB, .trl_msrs = TRL_BASE, .rapl_msrs = RAPL_PKG | RAPL_CORE_ALL | RAPL_GFX | RAPL_PKG_POWER_INFO, @@ -463,6 +468,7 @@ static const struct platform_features ivx_features = { .has_msr_misc_pwr_mgmt = 1, .has_nhm_msrs = 1, .bclk_freq = BCLK_100MHZ, + .supported_cstates = CC1 | CC3 | CC6, .cst_limit = CST_LIMIT_SNB, .trl_msrs = TRL_BASE | TRL_LIMIT1, .rapl_msrs = RAPL_PKG_ALL | RAPL_CORE_ALL | RAPL_DRAM_ALL, @@ -474,6 +480,7 @@ static const struct platform_features hsw_features = { .has_nhm_msrs = 1, .has_config_tdp = 1, .bclk_freq = BCLK_100MHZ, + .supported_cstates = CC1 | CC3 | CC6, .cst_limit = CST_LIMIT_HSW, .trl_msrs = TRL_BASE, .plr_msrs = PLR_CORE | PLR_GFX | PLR_RING, @@ -486,6 +493,7 @@ static const struct platform_features hsx_features = { .has_nhm_msrs = 1, .has_config_tdp = 1, .bclk_freq = BCLK_100MHZ, + .supported_cstates = CC1 | CC3 | CC6, .cst_limit = CST_LIMIT_HSW, .trl_msrs = TRL_BASE | TRL_LIMIT1 | TRL_LIMIT2, .plr_msrs = PLR_CORE | PLR_RING, @@ -499,6 +507,7 @@ static const struct platform_features hswl_features = { .has_nhm_msrs = 1, .has_config_tdp = 1, .bclk_freq = BCLK_100MHZ, + .supported_cstates = CC1 | CC3 | CC6, .cst_limit = CST_LIMIT_HSW, .trl_msrs = TRL_BASE, .plr_msrs = PLR_CORE | PLR_GFX | PLR_RING, @@ -511,6 +520,7 @@ static const struct platform_features hswg_features = { .has_nhm_msrs = 1, .has_config_tdp = 1, .bclk_freq = BCLK_100MHZ, + .supported_cstates = CC1 | CC3 | CC6, .cst_limit = CST_LIMIT_HSW, .trl_msrs = TRL_BASE, .plr_msrs = PLR_CORE | PLR_GFX | PLR_RING, @@ -523,6 +533,7 @@ static const struct platform_features bdw_features = { .has_nhm_msrs = 1, .has_config_tdp = 1, .bclk_freq = BCLK_100MHZ, + .supported_cstates = CC1 | CC3 | CC6, .cst_limit = CST_LIMIT_HSW, .trl_msrs = TRL_BASE, .rapl_msrs = RAPL_PKG | RAPL_CORE_ALL | RAPL_GFX | RAPL_PKG_POWER_INFO, @@ -534,6 +545,7 @@ static const struct platform_features bdwg_features = { .has_nhm_msrs = 1, .has_config_tdp = 1, .bclk_freq = BCLK_100MHZ, + .supported_cstates = CC1 | CC3 | CC6, .cst_limit = CST_LIMIT_HSW, .trl_msrs = TRL_BASE, .rapl_msrs = RAPL_PKG | RAPL_CORE_ALL | RAPL_GFX | RAPL_PKG_POWER_INFO, @@ -545,6 +557,7 @@ static const struct platform_features bdx_features = { .has_nhm_msrs = 1, .has_config_tdp = 1, .bclk_freq = BCLK_100MHZ, + .supported_cstates = CC1 | CC3 | CC6, .cst_limit = CST_LIMIT_HSW, .has_cst_auto_convension = 1, .trl_msrs = TRL_BASE, @@ -559,6 +572,7 @@ static const struct platform_features skl_features = { .has_config_tdp = 1, .bclk_freq = BCLK_100MHZ, .crystal_freq = 24000000, + .supported_cstates = CC1 | CC3 | CC6, .cst_limit = CST_LIMIT_HSW, .trl_msrs = TRL_BASE, .tcc_offset_bits = 6, @@ -572,6 +586,7 @@ static const struct platform_features cnl_features = { .has_nhm_msrs = 1, .has_config_tdp = 1, .bclk_freq = BCLK_100MHZ, + .supported_cstates = CC1 | CC3 | CC6, .cst_limit = CST_LIMIT_HSW, .trl_msrs = TRL_BASE, .tcc_offset_bits = 6, @@ -585,6 +600,7 @@ static const struct platform_features skx_features = { .has_nhm_msrs = 1, .has_config_tdp = 1, .bclk_freq = BCLK_100MHZ, + .supported_cstates = CC1 | CC3 | CC6, .cst_limit = CST_LIMIT_SKX, .has_cst_auto_convension = 1, .trl_msrs = TRL_BASE | TRL_CORECOUNT, @@ -598,6 +614,7 @@ static const struct platform_features icx_features = { .has_nhm_msrs = 1, .has_config_tdp = 1, .bclk_freq = BCLK_100MHZ, + .supported_cstates = CC1 | CC3 | CC6, .cst_limit = CST_LIMIT_ICX, .trl_msrs = TRL_BASE | TRL_CORECOUNT, .rapl_msrs = RAPL_PKG_ALL | RAPL_DRAM_ALL, @@ -610,6 +627,7 @@ static const struct platform_features spr_features = { .has_nhm_msrs = 1, .has_config_tdp = 1, .bclk_freq = BCLK_100MHZ, + .supported_cstates = CC1 | CC3 | CC6, .cst_limit = CST_LIMIT_SKX, .trl_msrs = TRL_BASE | TRL_CORECOUNT, .rapl_msrs = RAPL_PKG_ALL | RAPL_DRAM_ALL, @@ -618,6 +636,7 @@ static const struct platform_features spr_features = { static const struct platform_features slv_features = { .has_nhm_msrs = 1, .bclk_freq = BCLK_SLV, + .supported_cstates = CC1 | CC3 | CC6, .cst_limit = CST_LIMIT_SLV, .trl_msrs = TRL_ATOM, .rapl_msrs = RAPL_PKG | RAPL_CORE, @@ -629,6 +648,7 @@ static const struct platform_features slvd_features = { .has_msr_misc_pwr_mgmt = 1, .has_nhm_msrs = 1, .bclk_freq = BCLK_SLV, + .supported_cstates = CC1 | CC3 | CC6, .cst_limit = CST_LIMIT_SLV, .trl_msrs = TRL_BASE, .rapl_msrs = RAPL_PKG | RAPL_CORE, @@ -638,6 +658,7 @@ static const struct platform_features slvd_features = { static const struct platform_features amt_features = { .has_nhm_msrs = 1, .bclk_freq = BCLK_133MHZ, + .supported_cstates = CC1 | CC3 | CC6, .cst_limit = CST_LIMIT_AMT, .trl_msrs = TRL_BASE, }; @@ -647,6 +668,7 @@ static const struct platform_features gmt_features = { .has_nhm_msrs = 1, .bclk_freq = BCLK_100MHZ, .crystal_freq = 19200000, + .supported_cstates = CC1 | CC3 | CC6, .cst_limit = CST_LIMIT_GMT, .trl_msrs = TRL_BASE | TRL_CORECOUNT, .rapl_msrs = RAPL_PKG | RAPL_PKG_POWER_INFO, @@ -657,6 +679,7 @@ static const struct platform_features gmtd_features = { .has_nhm_msrs = 1, .bclk_freq = BCLK_100MHZ, .crystal_freq = 25000000, + .supported_cstates = CC1 | CC3 | CC6, .cst_limit = CST_LIMIT_GMT, .trl_msrs = TRL_BASE | TRL_CORECOUNT, .rapl_msrs = RAPL_PKG_ALL | RAPL_DRAM_ALL | RAPL_CORE_ENERGY_STATUS, @@ -667,6 +690,7 @@ static const struct platform_features gmtp_features = { .has_nhm_msrs = 1, .bclk_freq = BCLK_100MHZ, .crystal_freq = 19200000, + .supported_cstates = CC1 | CC3 | CC6, .cst_limit = CST_LIMIT_GMT, .trl_msrs = TRL_BASE, .rapl_msrs = RAPL_PKG | RAPL_PKG_POWER_INFO, @@ -676,6 +700,7 @@ static const struct platform_features tmt_features = { .has_msr_misc_pwr_mgmt = 1, .has_nhm_msrs = 1, .bclk_freq = BCLK_100MHZ, + .supported_cstates = CC1 | CC3 | CC6, .cst_limit = CST_LIMIT_GMT, .trl_msrs = TRL_BASE, .rapl_msrs = RAPL_PKG_ALL | RAPL_CORE_ALL | RAPL_DRAM | RAPL_DRAM_PERF_STATUS | RAPL_GFX, @@ -686,6 +711,7 @@ static const struct platform_features tmtd_features = { .has_msr_misc_pwr_mgmt = 1, .has_nhm_msrs = 1, .bclk_freq = BCLK_100MHZ, + .supported_cstates = CC1 | CC3 | CC6, .cst_limit = CST_LIMIT_GMT, .trl_msrs = TRL_BASE | TRL_CORECOUNT, .rapl_msrs = RAPL_PKG_ALL, @@ -696,6 +722,7 @@ static const struct platform_features knl_features = { .has_nhm_msrs = 1, .has_config_tdp = 1, .bclk_freq = BCLK_100MHZ, + .supported_cstates = CC1 | CC3 | CC6, .cst_limit = CST_LIMIT_KNL, .trl_msrs = TRL_KNL, .rapl_msrs = RAPL_PKG_ALL | RAPL_DRAM_ALL, @@ -5797,12 +5824,8 @@ void process_cpuid() probe_cstates(); - if (platform->has_nhm_msrs) { - BIC_PRESENT(BIC_CPU_c1); - BIC_PRESENT(BIC_CPU_c3); - BIC_PRESENT(BIC_CPU_c6); + if (platform->has_nhm_msrs) BIC_PRESENT(BIC_SMI); - } probe_bclk(); do_snb_cstates = has_snb_msrs(family, model); -- cgit v1.2.3 From 942c854d8d0f6c6fc0864a9da5f5e374a8e146e5 Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Fri, 8 Sep 2023 23:16:56 +0800 Subject: tools/power/turbostat: Adjust cstate for has_snb_msrs() models Enable CC7 and PC2 for has_snb_msrs() models. Signed-off-by: Zhang Rui Reviewed-by: Len Brown --- tools/power/x86/turbostat/turbostat.c | 47 ++++++++++++++++------------------- 1 file changed, 21 insertions(+), 26 deletions(-) diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c index c7345e0c5185..174a8d0750da 100644 --- a/tools/power/x86/turbostat/turbostat.c +++ b/tools/power/x86/turbostat/turbostat.c @@ -434,7 +434,7 @@ static const struct platform_features snb_features = { .has_msr_misc_pwr_mgmt = 1, .has_nhm_msrs = 1, .bclk_freq = BCLK_100MHZ, - .supported_cstates = CC1 | CC3 | CC6, + .supported_cstates = CC1 | CC3 | CC6 | CC7 | PC2, .cst_limit = CST_LIMIT_SNB, .trl_msrs = TRL_BASE, .rapl_msrs = RAPL_PKG | RAPL_CORE_ALL | RAPL_GFX | RAPL_PKG_POWER_INFO, @@ -445,7 +445,7 @@ static const struct platform_features snx_features = { .has_msr_misc_pwr_mgmt = 1, .has_nhm_msrs = 1, .bclk_freq = BCLK_100MHZ, - .supported_cstates = CC1 | CC3 | CC6, + .supported_cstates = CC1 | CC3 | CC6 | CC7 | PC2, .cst_limit = CST_LIMIT_SNB, .trl_msrs = TRL_BASE, .rapl_msrs = RAPL_PKG_ALL | RAPL_CORE_ALL | RAPL_DRAM_ALL, @@ -457,7 +457,7 @@ static const struct platform_features ivb_features = { .has_nhm_msrs = 1, .has_config_tdp = 1, .bclk_freq = BCLK_100MHZ, - .supported_cstates = CC1 | CC3 | CC6, + .supported_cstates = CC1 | CC3 | CC6 | CC7 | PC2, .cst_limit = CST_LIMIT_SNB, .trl_msrs = TRL_BASE, .rapl_msrs = RAPL_PKG | RAPL_CORE_ALL | RAPL_GFX | RAPL_PKG_POWER_INFO, @@ -468,7 +468,7 @@ static const struct platform_features ivx_features = { .has_msr_misc_pwr_mgmt = 1, .has_nhm_msrs = 1, .bclk_freq = BCLK_100MHZ, - .supported_cstates = CC1 | CC3 | CC6, + .supported_cstates = CC1 | CC3 | CC6 | CC7 | PC2, .cst_limit = CST_LIMIT_SNB, .trl_msrs = TRL_BASE | TRL_LIMIT1, .rapl_msrs = RAPL_PKG_ALL | RAPL_CORE_ALL | RAPL_DRAM_ALL, @@ -480,7 +480,7 @@ static const struct platform_features hsw_features = { .has_nhm_msrs = 1, .has_config_tdp = 1, .bclk_freq = BCLK_100MHZ, - .supported_cstates = CC1 | CC3 | CC6, + .supported_cstates = CC1 | CC3 | CC6 | CC7 | PC2, .cst_limit = CST_LIMIT_HSW, .trl_msrs = TRL_BASE, .plr_msrs = PLR_CORE | PLR_GFX | PLR_RING, @@ -493,7 +493,7 @@ static const struct platform_features hsx_features = { .has_nhm_msrs = 1, .has_config_tdp = 1, .bclk_freq = BCLK_100MHZ, - .supported_cstates = CC1 | CC3 | CC6, + .supported_cstates = CC1 | CC3 | CC6 | CC7 | PC2, .cst_limit = CST_LIMIT_HSW, .trl_msrs = TRL_BASE | TRL_LIMIT1 | TRL_LIMIT2, .plr_msrs = PLR_CORE | PLR_RING, @@ -507,7 +507,7 @@ static const struct platform_features hswl_features = { .has_nhm_msrs = 1, .has_config_tdp = 1, .bclk_freq = BCLK_100MHZ, - .supported_cstates = CC1 | CC3 | CC6, + .supported_cstates = CC1 | CC3 | CC6 | CC7 | PC2, .cst_limit = CST_LIMIT_HSW, .trl_msrs = TRL_BASE, .plr_msrs = PLR_CORE | PLR_GFX | PLR_RING, @@ -520,7 +520,7 @@ static const struct platform_features hswg_features = { .has_nhm_msrs = 1, .has_config_tdp = 1, .bclk_freq = BCLK_100MHZ, - .supported_cstates = CC1 | CC3 | CC6, + .supported_cstates = CC1 | CC3 | CC6 | CC7 | PC2, .cst_limit = CST_LIMIT_HSW, .trl_msrs = TRL_BASE, .plr_msrs = PLR_CORE | PLR_GFX | PLR_RING, @@ -533,7 +533,7 @@ static const struct platform_features bdw_features = { .has_nhm_msrs = 1, .has_config_tdp = 1, .bclk_freq = BCLK_100MHZ, - .supported_cstates = CC1 | CC3 | CC6, + .supported_cstates = CC1 | CC3 | CC6 | CC7 | PC2, .cst_limit = CST_LIMIT_HSW, .trl_msrs = TRL_BASE, .rapl_msrs = RAPL_PKG | RAPL_CORE_ALL | RAPL_GFX | RAPL_PKG_POWER_INFO, @@ -545,7 +545,7 @@ static const struct platform_features bdwg_features = { .has_nhm_msrs = 1, .has_config_tdp = 1, .bclk_freq = BCLK_100MHZ, - .supported_cstates = CC1 | CC3 | CC6, + .supported_cstates = CC1 | CC3 | CC6 | CC7 | PC2, .cst_limit = CST_LIMIT_HSW, .trl_msrs = TRL_BASE, .rapl_msrs = RAPL_PKG | RAPL_CORE_ALL | RAPL_GFX | RAPL_PKG_POWER_INFO, @@ -557,7 +557,7 @@ static const struct platform_features bdx_features = { .has_nhm_msrs = 1, .has_config_tdp = 1, .bclk_freq = BCLK_100MHZ, - .supported_cstates = CC1 | CC3 | CC6, + .supported_cstates = CC1 | CC3 | CC6 | CC7 | PC2, .cst_limit = CST_LIMIT_HSW, .has_cst_auto_convension = 1, .trl_msrs = TRL_BASE, @@ -572,7 +572,7 @@ static const struct platform_features skl_features = { .has_config_tdp = 1, .bclk_freq = BCLK_100MHZ, .crystal_freq = 24000000, - .supported_cstates = CC1 | CC3 | CC6, + .supported_cstates = CC1 | CC3 | CC6 | CC7 | PC2, .cst_limit = CST_LIMIT_HSW, .trl_msrs = TRL_BASE, .tcc_offset_bits = 6, @@ -586,7 +586,7 @@ static const struct platform_features cnl_features = { .has_nhm_msrs = 1, .has_config_tdp = 1, .bclk_freq = BCLK_100MHZ, - .supported_cstates = CC1 | CC3 | CC6, + .supported_cstates = CC1 | CC3 | CC6 | CC7 | PC2, .cst_limit = CST_LIMIT_HSW, .trl_msrs = TRL_BASE, .tcc_offset_bits = 6, @@ -600,7 +600,7 @@ static const struct platform_features skx_features = { .has_nhm_msrs = 1, .has_config_tdp = 1, .bclk_freq = BCLK_100MHZ, - .supported_cstates = CC1 | CC3 | CC6, + .supported_cstates = CC1 | CC3 | CC6 | CC7 | PC2, .cst_limit = CST_LIMIT_SKX, .has_cst_auto_convension = 1, .trl_msrs = TRL_BASE | TRL_CORECOUNT, @@ -614,7 +614,7 @@ static const struct platform_features icx_features = { .has_nhm_msrs = 1, .has_config_tdp = 1, .bclk_freq = BCLK_100MHZ, - .supported_cstates = CC1 | CC3 | CC6, + .supported_cstates = CC1 | CC3 | CC6 | CC7 | PC2, .cst_limit = CST_LIMIT_ICX, .trl_msrs = TRL_BASE | TRL_CORECOUNT, .rapl_msrs = RAPL_PKG_ALL | RAPL_DRAM_ALL, @@ -627,7 +627,7 @@ static const struct platform_features spr_features = { .has_nhm_msrs = 1, .has_config_tdp = 1, .bclk_freq = BCLK_100MHZ, - .supported_cstates = CC1 | CC3 | CC6, + .supported_cstates = CC1 | CC3 | CC6 | CC7 | PC2, .cst_limit = CST_LIMIT_SKX, .trl_msrs = TRL_BASE | TRL_CORECOUNT, .rapl_msrs = RAPL_PKG_ALL | RAPL_DRAM_ALL, @@ -668,7 +668,7 @@ static const struct platform_features gmt_features = { .has_nhm_msrs = 1, .bclk_freq = BCLK_100MHZ, .crystal_freq = 19200000, - .supported_cstates = CC1 | CC3 | CC6, + .supported_cstates = CC1 | CC3 | CC6 | CC7 | PC2, .cst_limit = CST_LIMIT_GMT, .trl_msrs = TRL_BASE | TRL_CORECOUNT, .rapl_msrs = RAPL_PKG | RAPL_PKG_POWER_INFO, @@ -679,7 +679,7 @@ static const struct platform_features gmtd_features = { .has_nhm_msrs = 1, .bclk_freq = BCLK_100MHZ, .crystal_freq = 25000000, - .supported_cstates = CC1 | CC3 | CC6, + .supported_cstates = CC1 | CC3 | CC6 | CC7 | PC2, .cst_limit = CST_LIMIT_GMT, .trl_msrs = TRL_BASE | TRL_CORECOUNT, .rapl_msrs = RAPL_PKG_ALL | RAPL_DRAM_ALL | RAPL_CORE_ENERGY_STATUS, @@ -690,7 +690,7 @@ static const struct platform_features gmtp_features = { .has_nhm_msrs = 1, .bclk_freq = BCLK_100MHZ, .crystal_freq = 19200000, - .supported_cstates = CC1 | CC3 | CC6, + .supported_cstates = CC1 | CC3 | CC6 | CC7 | PC2, .cst_limit = CST_LIMIT_GMT, .trl_msrs = TRL_BASE, .rapl_msrs = RAPL_PKG | RAPL_PKG_POWER_INFO, @@ -700,7 +700,7 @@ static const struct platform_features tmt_features = { .has_msr_misc_pwr_mgmt = 1, .has_nhm_msrs = 1, .bclk_freq = BCLK_100MHZ, - .supported_cstates = CC1 | CC3 | CC6, + .supported_cstates = CC1 | CC3 | CC6 | CC7 | PC2, .cst_limit = CST_LIMIT_GMT, .trl_msrs = TRL_BASE, .rapl_msrs = RAPL_PKG_ALL | RAPL_CORE_ALL | RAPL_DRAM | RAPL_DRAM_PERF_STATUS | RAPL_GFX, @@ -711,7 +711,7 @@ static const struct platform_features tmtd_features = { .has_msr_misc_pwr_mgmt = 1, .has_nhm_msrs = 1, .bclk_freq = BCLK_100MHZ, - .supported_cstates = CC1 | CC3 | CC6, + .supported_cstates = CC1 | CC3 | CC6 | CC7 | PC2, .cst_limit = CST_LIMIT_GMT, .trl_msrs = TRL_BASE | TRL_CORECOUNT, .rapl_msrs = RAPL_PKG_ALL, @@ -5829,12 +5829,7 @@ void process_cpuid() probe_bclk(); do_snb_cstates = has_snb_msrs(family, model); - if (do_snb_cstates) - BIC_PRESENT(BIC_CPU_c7); - do_irtl_snb = has_snb_msrs(family, model); - if (do_snb_cstates && (pkg_cstate_limit >= PCL__2)) - BIC_PRESENT(BIC_Pkgpc2); if (pkg_cstate_limit >= PCL__3) BIC_PRESENT(BIC_Pkgpc3); if (pkg_cstate_limit >= PCL__6) -- cgit v1.2.3 From 6f1935c036f79b56b6a1dc6e51c8c6fe483983ec Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Fri, 8 Sep 2023 23:17:23 +0800 Subject: tools/power/turbostat: Adjust cstate for models with .cst_limit set Enable PC3/PC6 for platforms with .cst_limit set because package cstates are guarded by pkg_cstate_limit. Signed-off-by: Zhang Rui Reviewed-by: Len Brown --- tools/power/x86/turbostat/turbostat.c | 58 ++++++++++++++++------------------- 1 file changed, 27 insertions(+), 31 deletions(-) diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c index 174a8d0750da..2bfbf4ccf5ac 100644 --- a/tools/power/x86/turbostat/turbostat.c +++ b/tools/power/x86/turbostat/turbostat.c @@ -416,7 +416,7 @@ static const struct platform_features nhm_features = { .has_msr_misc_pwr_mgmt = 1, .has_nhm_msrs = 1, .bclk_freq = BCLK_133MHZ, - .supported_cstates = CC1 | CC3 | CC6, + .supported_cstates = CC1 | CC3 | CC6 | PC3 | PC6, .cst_limit = CST_LIMIT_NHM, .trl_msrs = TRL_BASE, }; @@ -425,7 +425,7 @@ static const struct platform_features nhx_features = { .has_msr_misc_pwr_mgmt = 1, .has_nhm_msrs = 1, .bclk_freq = BCLK_133MHZ, - .supported_cstates = CC1 | CC3 | CC6, + .supported_cstates = CC1 | CC3 | CC6 | PC3 | PC6, .cst_limit = CST_LIMIT_NHM, }; @@ -434,7 +434,7 @@ static const struct platform_features snb_features = { .has_msr_misc_pwr_mgmt = 1, .has_nhm_msrs = 1, .bclk_freq = BCLK_100MHZ, - .supported_cstates = CC1 | CC3 | CC6 | CC7 | PC2, + .supported_cstates = CC1 | CC3 | CC6 | CC7 | PC2 | PC3 | PC6, .cst_limit = CST_LIMIT_SNB, .trl_msrs = TRL_BASE, .rapl_msrs = RAPL_PKG | RAPL_CORE_ALL | RAPL_GFX | RAPL_PKG_POWER_INFO, @@ -445,7 +445,7 @@ static const struct platform_features snx_features = { .has_msr_misc_pwr_mgmt = 1, .has_nhm_msrs = 1, .bclk_freq = BCLK_100MHZ, - .supported_cstates = CC1 | CC3 | CC6 | CC7 | PC2, + .supported_cstates = CC1 | CC3 | CC6 | CC7 | PC2 | PC3 | PC6, .cst_limit = CST_LIMIT_SNB, .trl_msrs = TRL_BASE, .rapl_msrs = RAPL_PKG_ALL | RAPL_CORE_ALL | RAPL_DRAM_ALL, @@ -457,7 +457,7 @@ static const struct platform_features ivb_features = { .has_nhm_msrs = 1, .has_config_tdp = 1, .bclk_freq = BCLK_100MHZ, - .supported_cstates = CC1 | CC3 | CC6 | CC7 | PC2, + .supported_cstates = CC1 | CC3 | CC6 | CC7 | PC2 | PC3 | PC6, .cst_limit = CST_LIMIT_SNB, .trl_msrs = TRL_BASE, .rapl_msrs = RAPL_PKG | RAPL_CORE_ALL | RAPL_GFX | RAPL_PKG_POWER_INFO, @@ -468,7 +468,7 @@ static const struct platform_features ivx_features = { .has_msr_misc_pwr_mgmt = 1, .has_nhm_msrs = 1, .bclk_freq = BCLK_100MHZ, - .supported_cstates = CC1 | CC3 | CC6 | CC7 | PC2, + .supported_cstates = CC1 | CC3 | CC6 | CC7 | PC2 | PC3 | PC6, .cst_limit = CST_LIMIT_SNB, .trl_msrs = TRL_BASE | TRL_LIMIT1, .rapl_msrs = RAPL_PKG_ALL | RAPL_CORE_ALL | RAPL_DRAM_ALL, @@ -480,7 +480,7 @@ static const struct platform_features hsw_features = { .has_nhm_msrs = 1, .has_config_tdp = 1, .bclk_freq = BCLK_100MHZ, - .supported_cstates = CC1 | CC3 | CC6 | CC7 | PC2, + .supported_cstates = CC1 | CC3 | CC6 | CC7 | PC2 | PC3 | PC6, .cst_limit = CST_LIMIT_HSW, .trl_msrs = TRL_BASE, .plr_msrs = PLR_CORE | PLR_GFX | PLR_RING, @@ -493,7 +493,7 @@ static const struct platform_features hsx_features = { .has_nhm_msrs = 1, .has_config_tdp = 1, .bclk_freq = BCLK_100MHZ, - .supported_cstates = CC1 | CC3 | CC6 | CC7 | PC2, + .supported_cstates = CC1 | CC3 | CC6 | CC7 | PC2 | PC3 | PC6, .cst_limit = CST_LIMIT_HSW, .trl_msrs = TRL_BASE | TRL_LIMIT1 | TRL_LIMIT2, .plr_msrs = PLR_CORE | PLR_RING, @@ -507,7 +507,7 @@ static const struct platform_features hswl_features = { .has_nhm_msrs = 1, .has_config_tdp = 1, .bclk_freq = BCLK_100MHZ, - .supported_cstates = CC1 | CC3 | CC6 | CC7 | PC2, + .supported_cstates = CC1 | CC3 | CC6 | CC7 | PC2 | PC3 | PC6, .cst_limit = CST_LIMIT_HSW, .trl_msrs = TRL_BASE, .plr_msrs = PLR_CORE | PLR_GFX | PLR_RING, @@ -520,7 +520,7 @@ static const struct platform_features hswg_features = { .has_nhm_msrs = 1, .has_config_tdp = 1, .bclk_freq = BCLK_100MHZ, - .supported_cstates = CC1 | CC3 | CC6 | CC7 | PC2, + .supported_cstates = CC1 | CC3 | CC6 | CC7 | PC2 | PC3 | PC6, .cst_limit = CST_LIMIT_HSW, .trl_msrs = TRL_BASE, .plr_msrs = PLR_CORE | PLR_GFX | PLR_RING, @@ -533,7 +533,7 @@ static const struct platform_features bdw_features = { .has_nhm_msrs = 1, .has_config_tdp = 1, .bclk_freq = BCLK_100MHZ, - .supported_cstates = CC1 | CC3 | CC6 | CC7 | PC2, + .supported_cstates = CC1 | CC3 | CC6 | CC7 | PC2 | PC3 | PC6, .cst_limit = CST_LIMIT_HSW, .trl_msrs = TRL_BASE, .rapl_msrs = RAPL_PKG | RAPL_CORE_ALL | RAPL_GFX | RAPL_PKG_POWER_INFO, @@ -545,7 +545,7 @@ static const struct platform_features bdwg_features = { .has_nhm_msrs = 1, .has_config_tdp = 1, .bclk_freq = BCLK_100MHZ, - .supported_cstates = CC1 | CC3 | CC6 | CC7 | PC2, + .supported_cstates = CC1 | CC3 | CC6 | CC7 | PC2 | PC3 | PC6, .cst_limit = CST_LIMIT_HSW, .trl_msrs = TRL_BASE, .rapl_msrs = RAPL_PKG | RAPL_CORE_ALL | RAPL_GFX | RAPL_PKG_POWER_INFO, @@ -557,7 +557,7 @@ static const struct platform_features bdx_features = { .has_nhm_msrs = 1, .has_config_tdp = 1, .bclk_freq = BCLK_100MHZ, - .supported_cstates = CC1 | CC3 | CC6 | CC7 | PC2, + .supported_cstates = CC1 | CC3 | CC6 | CC7 | PC2 | PC3 | PC6, .cst_limit = CST_LIMIT_HSW, .has_cst_auto_convension = 1, .trl_msrs = TRL_BASE, @@ -572,7 +572,7 @@ static const struct platform_features skl_features = { .has_config_tdp = 1, .bclk_freq = BCLK_100MHZ, .crystal_freq = 24000000, - .supported_cstates = CC1 | CC3 | CC6 | CC7 | PC2, + .supported_cstates = CC1 | CC3 | CC6 | CC7 | PC2 | PC3 | PC6, .cst_limit = CST_LIMIT_HSW, .trl_msrs = TRL_BASE, .tcc_offset_bits = 6, @@ -586,7 +586,7 @@ static const struct platform_features cnl_features = { .has_nhm_msrs = 1, .has_config_tdp = 1, .bclk_freq = BCLK_100MHZ, - .supported_cstates = CC1 | CC3 | CC6 | CC7 | PC2, + .supported_cstates = CC1 | CC3 | CC6 | CC7 | PC2 | PC3 | PC6, .cst_limit = CST_LIMIT_HSW, .trl_msrs = TRL_BASE, .tcc_offset_bits = 6, @@ -600,7 +600,7 @@ static const struct platform_features skx_features = { .has_nhm_msrs = 1, .has_config_tdp = 1, .bclk_freq = BCLK_100MHZ, - .supported_cstates = CC1 | CC3 | CC6 | CC7 | PC2, + .supported_cstates = CC1 | CC3 | CC6 | CC7 | PC2 | PC3 | PC6, .cst_limit = CST_LIMIT_SKX, .has_cst_auto_convension = 1, .trl_msrs = TRL_BASE | TRL_CORECOUNT, @@ -614,7 +614,7 @@ static const struct platform_features icx_features = { .has_nhm_msrs = 1, .has_config_tdp = 1, .bclk_freq = BCLK_100MHZ, - .supported_cstates = CC1 | CC3 | CC6 | CC7 | PC2, + .supported_cstates = CC1 | CC3 | CC6 | CC7 | PC2 | PC3 | PC6, .cst_limit = CST_LIMIT_ICX, .trl_msrs = TRL_BASE | TRL_CORECOUNT, .rapl_msrs = RAPL_PKG_ALL | RAPL_DRAM_ALL, @@ -627,7 +627,7 @@ static const struct platform_features spr_features = { .has_nhm_msrs = 1, .has_config_tdp = 1, .bclk_freq = BCLK_100MHZ, - .supported_cstates = CC1 | CC3 | CC6 | CC7 | PC2, + .supported_cstates = CC1 | CC3 | CC6 | CC7 | PC2 | PC3 | PC6, .cst_limit = CST_LIMIT_SKX, .trl_msrs = TRL_BASE | TRL_CORECOUNT, .rapl_msrs = RAPL_PKG_ALL | RAPL_DRAM_ALL, @@ -636,7 +636,7 @@ static const struct platform_features spr_features = { static const struct platform_features slv_features = { .has_nhm_msrs = 1, .bclk_freq = BCLK_SLV, - .supported_cstates = CC1 | CC3 | CC6, + .supported_cstates = CC1 | CC3 | CC6 | PC3 | PC6, .cst_limit = CST_LIMIT_SLV, .trl_msrs = TRL_ATOM, .rapl_msrs = RAPL_PKG | RAPL_CORE, @@ -648,7 +648,7 @@ static const struct platform_features slvd_features = { .has_msr_misc_pwr_mgmt = 1, .has_nhm_msrs = 1, .bclk_freq = BCLK_SLV, - .supported_cstates = CC1 | CC3 | CC6, + .supported_cstates = CC1 | CC3 | CC6 | PC3 | PC6, .cst_limit = CST_LIMIT_SLV, .trl_msrs = TRL_BASE, .rapl_msrs = RAPL_PKG | RAPL_CORE, @@ -658,7 +658,7 @@ static const struct platform_features slvd_features = { static const struct platform_features amt_features = { .has_nhm_msrs = 1, .bclk_freq = BCLK_133MHZ, - .supported_cstates = CC1 | CC3 | CC6, + .supported_cstates = CC1 | CC3 | CC6 | PC3 | PC6, .cst_limit = CST_LIMIT_AMT, .trl_msrs = TRL_BASE, }; @@ -668,7 +668,7 @@ static const struct platform_features gmt_features = { .has_nhm_msrs = 1, .bclk_freq = BCLK_100MHZ, .crystal_freq = 19200000, - .supported_cstates = CC1 | CC3 | CC6 | CC7 | PC2, + .supported_cstates = CC1 | CC3 | CC6 | CC7 | PC2 | PC3 | PC6, .cst_limit = CST_LIMIT_GMT, .trl_msrs = TRL_BASE | TRL_CORECOUNT, .rapl_msrs = RAPL_PKG | RAPL_PKG_POWER_INFO, @@ -679,7 +679,7 @@ static const struct platform_features gmtd_features = { .has_nhm_msrs = 1, .bclk_freq = BCLK_100MHZ, .crystal_freq = 25000000, - .supported_cstates = CC1 | CC3 | CC6 | CC7 | PC2, + .supported_cstates = CC1 | CC3 | CC6 | CC7 | PC2 | PC3 | PC6, .cst_limit = CST_LIMIT_GMT, .trl_msrs = TRL_BASE | TRL_CORECOUNT, .rapl_msrs = RAPL_PKG_ALL | RAPL_DRAM_ALL | RAPL_CORE_ENERGY_STATUS, @@ -690,7 +690,7 @@ static const struct platform_features gmtp_features = { .has_nhm_msrs = 1, .bclk_freq = BCLK_100MHZ, .crystal_freq = 19200000, - .supported_cstates = CC1 | CC3 | CC6 | CC7 | PC2, + .supported_cstates = CC1 | CC3 | CC6 | CC7 | PC2 | PC3 | PC6, .cst_limit = CST_LIMIT_GMT, .trl_msrs = TRL_BASE, .rapl_msrs = RAPL_PKG | RAPL_PKG_POWER_INFO, @@ -700,7 +700,7 @@ static const struct platform_features tmt_features = { .has_msr_misc_pwr_mgmt = 1, .has_nhm_msrs = 1, .bclk_freq = BCLK_100MHZ, - .supported_cstates = CC1 | CC3 | CC6 | CC7 | PC2, + .supported_cstates = CC1 | CC3 | CC6 | CC7 | PC2 | PC3 | PC6, .cst_limit = CST_LIMIT_GMT, .trl_msrs = TRL_BASE, .rapl_msrs = RAPL_PKG_ALL | RAPL_CORE_ALL | RAPL_DRAM | RAPL_DRAM_PERF_STATUS | RAPL_GFX, @@ -711,7 +711,7 @@ static const struct platform_features tmtd_features = { .has_msr_misc_pwr_mgmt = 1, .has_nhm_msrs = 1, .bclk_freq = BCLK_100MHZ, - .supported_cstates = CC1 | CC3 | CC6 | CC7 | PC2, + .supported_cstates = CC1 | CC3 | CC6 | CC7 | PC2 | PC3 | PC6, .cst_limit = CST_LIMIT_GMT, .trl_msrs = TRL_BASE | TRL_CORECOUNT, .rapl_msrs = RAPL_PKG_ALL, @@ -722,7 +722,7 @@ static const struct platform_features knl_features = { .has_nhm_msrs = 1, .has_config_tdp = 1, .bclk_freq = BCLK_100MHZ, - .supported_cstates = CC1 | CC3 | CC6, + .supported_cstates = CC1 | CC3 | CC6 | PC3 | PC6, .cst_limit = CST_LIMIT_KNL, .trl_msrs = TRL_KNL, .rapl_msrs = RAPL_PKG_ALL | RAPL_DRAM_ALL, @@ -5830,10 +5830,6 @@ void process_cpuid() do_snb_cstates = has_snb_msrs(family, model); do_irtl_snb = has_snb_msrs(family, model); - if (pkg_cstate_limit >= PCL__3) - BIC_PRESENT(BIC_Pkgpc3); - if (pkg_cstate_limit >= PCL__6) - BIC_PRESENT(BIC_Pkgpc6); if (do_snb_cstates && (pkg_cstate_limit >= PCL__7)) BIC_PRESENT(BIC_Pkgpc7); if (has_slv_msrs(family, model)) { -- cgit v1.2.3 From 192cbf0468ae31062526287e257f5b56214d2da5 Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Fri, 8 Sep 2023 23:17:58 +0800 Subject: tools/power/turbostat: Adjust cstate for has_snb_msrs() models Enable PC7 for has_snb_msrs() models. Signed-off-by: Zhang Rui Reviewed-by: Len Brown --- tools/power/x86/turbostat/turbostat.c | 46 ++++++++++++++++------------------- 1 file changed, 21 insertions(+), 25 deletions(-) diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c index 2bfbf4ccf5ac..f3d44e81d7d5 100644 --- a/tools/power/x86/turbostat/turbostat.c +++ b/tools/power/x86/turbostat/turbostat.c @@ -221,7 +221,6 @@ unsigned int rapl_joules; unsigned int summary_only; unsigned int list_header_only; unsigned int dump_only; -unsigned int do_snb_cstates; unsigned int do_knl_cstates; unsigned int do_slm_cstates; unsigned int use_c1_residency_msr; @@ -434,7 +433,7 @@ static const struct platform_features snb_features = { .has_msr_misc_pwr_mgmt = 1, .has_nhm_msrs = 1, .bclk_freq = BCLK_100MHZ, - .supported_cstates = CC1 | CC3 | CC6 | CC7 | PC2 | PC3 | PC6, + .supported_cstates = CC1 | CC3 | CC6 | CC7 | PC2 | PC3 | PC6 | PC7, .cst_limit = CST_LIMIT_SNB, .trl_msrs = TRL_BASE, .rapl_msrs = RAPL_PKG | RAPL_CORE_ALL | RAPL_GFX | RAPL_PKG_POWER_INFO, @@ -445,7 +444,7 @@ static const struct platform_features snx_features = { .has_msr_misc_pwr_mgmt = 1, .has_nhm_msrs = 1, .bclk_freq = BCLK_100MHZ, - .supported_cstates = CC1 | CC3 | CC6 | CC7 | PC2 | PC3 | PC6, + .supported_cstates = CC1 | CC3 | CC6 | CC7 | PC2 | PC3 | PC6 | PC7, .cst_limit = CST_LIMIT_SNB, .trl_msrs = TRL_BASE, .rapl_msrs = RAPL_PKG_ALL | RAPL_CORE_ALL | RAPL_DRAM_ALL, @@ -457,7 +456,7 @@ static const struct platform_features ivb_features = { .has_nhm_msrs = 1, .has_config_tdp = 1, .bclk_freq = BCLK_100MHZ, - .supported_cstates = CC1 | CC3 | CC6 | CC7 | PC2 | PC3 | PC6, + .supported_cstates = CC1 | CC3 | CC6 | CC7 | PC2 | PC3 | PC6 | PC7, .cst_limit = CST_LIMIT_SNB, .trl_msrs = TRL_BASE, .rapl_msrs = RAPL_PKG | RAPL_CORE_ALL | RAPL_GFX | RAPL_PKG_POWER_INFO, @@ -468,7 +467,7 @@ static const struct platform_features ivx_features = { .has_msr_misc_pwr_mgmt = 1, .has_nhm_msrs = 1, .bclk_freq = BCLK_100MHZ, - .supported_cstates = CC1 | CC3 | CC6 | CC7 | PC2 | PC3 | PC6, + .supported_cstates = CC1 | CC3 | CC6 | CC7 | PC2 | PC3 | PC6 | PC7, .cst_limit = CST_LIMIT_SNB, .trl_msrs = TRL_BASE | TRL_LIMIT1, .rapl_msrs = RAPL_PKG_ALL | RAPL_CORE_ALL | RAPL_DRAM_ALL, @@ -480,7 +479,7 @@ static const struct platform_features hsw_features = { .has_nhm_msrs = 1, .has_config_tdp = 1, .bclk_freq = BCLK_100MHZ, - .supported_cstates = CC1 | CC3 | CC6 | CC7 | PC2 | PC3 | PC6, + .supported_cstates = CC1 | CC3 | CC6 | CC7 | PC2 | PC3 | PC6 | PC7, .cst_limit = CST_LIMIT_HSW, .trl_msrs = TRL_BASE, .plr_msrs = PLR_CORE | PLR_GFX | PLR_RING, @@ -493,7 +492,7 @@ static const struct platform_features hsx_features = { .has_nhm_msrs = 1, .has_config_tdp = 1, .bclk_freq = BCLK_100MHZ, - .supported_cstates = CC1 | CC3 | CC6 | CC7 | PC2 | PC3 | PC6, + .supported_cstates = CC1 | CC3 | CC6 | CC7 | PC2 | PC3 | PC6 | PC7, .cst_limit = CST_LIMIT_HSW, .trl_msrs = TRL_BASE | TRL_LIMIT1 | TRL_LIMIT2, .plr_msrs = PLR_CORE | PLR_RING, @@ -507,7 +506,7 @@ static const struct platform_features hswl_features = { .has_nhm_msrs = 1, .has_config_tdp = 1, .bclk_freq = BCLK_100MHZ, - .supported_cstates = CC1 | CC3 | CC6 | CC7 | PC2 | PC3 | PC6, + .supported_cstates = CC1 | CC3 | CC6 | CC7 | PC2 | PC3 | PC6 | PC7, .cst_limit = CST_LIMIT_HSW, .trl_msrs = TRL_BASE, .plr_msrs = PLR_CORE | PLR_GFX | PLR_RING, @@ -520,7 +519,7 @@ static const struct platform_features hswg_features = { .has_nhm_msrs = 1, .has_config_tdp = 1, .bclk_freq = BCLK_100MHZ, - .supported_cstates = CC1 | CC3 | CC6 | CC7 | PC2 | PC3 | PC6, + .supported_cstates = CC1 | CC3 | CC6 | CC7 | PC2 | PC3 | PC6 | PC7, .cst_limit = CST_LIMIT_HSW, .trl_msrs = TRL_BASE, .plr_msrs = PLR_CORE | PLR_GFX | PLR_RING, @@ -533,7 +532,7 @@ static const struct platform_features bdw_features = { .has_nhm_msrs = 1, .has_config_tdp = 1, .bclk_freq = BCLK_100MHZ, - .supported_cstates = CC1 | CC3 | CC6 | CC7 | PC2 | PC3 | PC6, + .supported_cstates = CC1 | CC3 | CC6 | CC7 | PC2 | PC3 | PC6 | PC7, .cst_limit = CST_LIMIT_HSW, .trl_msrs = TRL_BASE, .rapl_msrs = RAPL_PKG | RAPL_CORE_ALL | RAPL_GFX | RAPL_PKG_POWER_INFO, @@ -545,7 +544,7 @@ static const struct platform_features bdwg_features = { .has_nhm_msrs = 1, .has_config_tdp = 1, .bclk_freq = BCLK_100MHZ, - .supported_cstates = CC1 | CC3 | CC6 | CC7 | PC2 | PC3 | PC6, + .supported_cstates = CC1 | CC3 | CC6 | CC7 | PC2 | PC3 | PC6 | PC7, .cst_limit = CST_LIMIT_HSW, .trl_msrs = TRL_BASE, .rapl_msrs = RAPL_PKG | RAPL_CORE_ALL | RAPL_GFX | RAPL_PKG_POWER_INFO, @@ -557,7 +556,7 @@ static const struct platform_features bdx_features = { .has_nhm_msrs = 1, .has_config_tdp = 1, .bclk_freq = BCLK_100MHZ, - .supported_cstates = CC1 | CC3 | CC6 | CC7 | PC2 | PC3 | PC6, + .supported_cstates = CC1 | CC3 | CC6 | CC7 | PC2 | PC3 | PC6 | PC7, .cst_limit = CST_LIMIT_HSW, .has_cst_auto_convension = 1, .trl_msrs = TRL_BASE, @@ -572,7 +571,7 @@ static const struct platform_features skl_features = { .has_config_tdp = 1, .bclk_freq = BCLK_100MHZ, .crystal_freq = 24000000, - .supported_cstates = CC1 | CC3 | CC6 | CC7 | PC2 | PC3 | PC6, + .supported_cstates = CC1 | CC3 | CC6 | CC7 | PC2 | PC3 | PC6 | PC7, .cst_limit = CST_LIMIT_HSW, .trl_msrs = TRL_BASE, .tcc_offset_bits = 6, @@ -586,7 +585,7 @@ static const struct platform_features cnl_features = { .has_nhm_msrs = 1, .has_config_tdp = 1, .bclk_freq = BCLK_100MHZ, - .supported_cstates = CC1 | CC3 | CC6 | CC7 | PC2 | PC3 | PC6, + .supported_cstates = CC1 | CC3 | CC6 | CC7 | PC2 | PC3 | PC6 | PC7, .cst_limit = CST_LIMIT_HSW, .trl_msrs = TRL_BASE, .tcc_offset_bits = 6, @@ -600,7 +599,7 @@ static const struct platform_features skx_features = { .has_nhm_msrs = 1, .has_config_tdp = 1, .bclk_freq = BCLK_100MHZ, - .supported_cstates = CC1 | CC3 | CC6 | CC7 | PC2 | PC3 | PC6, + .supported_cstates = CC1 | CC3 | CC6 | CC7 | PC2 | PC3 | PC6 | PC7, .cst_limit = CST_LIMIT_SKX, .has_cst_auto_convension = 1, .trl_msrs = TRL_BASE | TRL_CORECOUNT, @@ -614,7 +613,7 @@ static const struct platform_features icx_features = { .has_nhm_msrs = 1, .has_config_tdp = 1, .bclk_freq = BCLK_100MHZ, - .supported_cstates = CC1 | CC3 | CC6 | CC7 | PC2 | PC3 | PC6, + .supported_cstates = CC1 | CC3 | CC6 | CC7 | PC2 | PC3 | PC6 | PC7, .cst_limit = CST_LIMIT_ICX, .trl_msrs = TRL_BASE | TRL_CORECOUNT, .rapl_msrs = RAPL_PKG_ALL | RAPL_DRAM_ALL, @@ -627,7 +626,7 @@ static const struct platform_features spr_features = { .has_nhm_msrs = 1, .has_config_tdp = 1, .bclk_freq = BCLK_100MHZ, - .supported_cstates = CC1 | CC3 | CC6 | CC7 | PC2 | PC3 | PC6, + .supported_cstates = CC1 | CC3 | CC6 | CC7 | PC2 | PC3 | PC6 | PC7, .cst_limit = CST_LIMIT_SKX, .trl_msrs = TRL_BASE | TRL_CORECOUNT, .rapl_msrs = RAPL_PKG_ALL | RAPL_DRAM_ALL, @@ -668,7 +667,7 @@ static const struct platform_features gmt_features = { .has_nhm_msrs = 1, .bclk_freq = BCLK_100MHZ, .crystal_freq = 19200000, - .supported_cstates = CC1 | CC3 | CC6 | CC7 | PC2 | PC3 | PC6, + .supported_cstates = CC1 | CC3 | CC6 | CC7 | PC2 | PC3 | PC6 | PC7, .cst_limit = CST_LIMIT_GMT, .trl_msrs = TRL_BASE | TRL_CORECOUNT, .rapl_msrs = RAPL_PKG | RAPL_PKG_POWER_INFO, @@ -679,7 +678,7 @@ static const struct platform_features gmtd_features = { .has_nhm_msrs = 1, .bclk_freq = BCLK_100MHZ, .crystal_freq = 25000000, - .supported_cstates = CC1 | CC3 | CC6 | CC7 | PC2 | PC3 | PC6, + .supported_cstates = CC1 | CC3 | CC6 | CC7 | PC2 | PC3 | PC6 | PC7, .cst_limit = CST_LIMIT_GMT, .trl_msrs = TRL_BASE | TRL_CORECOUNT, .rapl_msrs = RAPL_PKG_ALL | RAPL_DRAM_ALL | RAPL_CORE_ENERGY_STATUS, @@ -690,7 +689,7 @@ static const struct platform_features gmtp_features = { .has_nhm_msrs = 1, .bclk_freq = BCLK_100MHZ, .crystal_freq = 19200000, - .supported_cstates = CC1 | CC3 | CC6 | CC7 | PC2 | PC3 | PC6, + .supported_cstates = CC1 | CC3 | CC6 | CC7 | PC2 | PC3 | PC6 | PC7, .cst_limit = CST_LIMIT_GMT, .trl_msrs = TRL_BASE, .rapl_msrs = RAPL_PKG | RAPL_PKG_POWER_INFO, @@ -700,7 +699,7 @@ static const struct platform_features tmt_features = { .has_msr_misc_pwr_mgmt = 1, .has_nhm_msrs = 1, .bclk_freq = BCLK_100MHZ, - .supported_cstates = CC1 | CC3 | CC6 | CC7 | PC2 | PC3 | PC6, + .supported_cstates = CC1 | CC3 | CC6 | CC7 | PC2 | PC3 | PC6 | PC7, .cst_limit = CST_LIMIT_GMT, .trl_msrs = TRL_BASE, .rapl_msrs = RAPL_PKG_ALL | RAPL_CORE_ALL | RAPL_DRAM | RAPL_DRAM_PERF_STATUS | RAPL_GFX, @@ -711,7 +710,7 @@ static const struct platform_features tmtd_features = { .has_msr_misc_pwr_mgmt = 1, .has_nhm_msrs = 1, .bclk_freq = BCLK_100MHZ, - .supported_cstates = CC1 | CC3 | CC6 | CC7 | PC2 | PC3 | PC6, + .supported_cstates = CC1 | CC3 | CC6 | CC7 | PC2 | PC3 | PC6 | PC7, .cst_limit = CST_LIMIT_GMT, .trl_msrs = TRL_BASE | TRL_CORECOUNT, .rapl_msrs = RAPL_PKG_ALL, @@ -5827,11 +5826,8 @@ void process_cpuid() if (platform->has_nhm_msrs) BIC_PRESENT(BIC_SMI); probe_bclk(); - do_snb_cstates = has_snb_msrs(family, model); do_irtl_snb = has_snb_msrs(family, model); - if (do_snb_cstates && (pkg_cstate_limit >= PCL__7)) - BIC_PRESENT(BIC_Pkgpc7); if (has_slv_msrs(family, model)) { BIC_NOT_PRESENT(BIC_Pkgpc2); BIC_NOT_PRESENT(BIC_Pkgpc3); -- cgit v1.2.3 From ff206149551f09117f44883650a45ae692745703 Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Sun, 27 Aug 2023 14:07:08 +0800 Subject: tools/power/turbostat: Adjust cstate for has_slv_msrs() models Disable PC2/PC3/PC7 and enable PC6 for has_slv_msrs() models. Signed-off-by: Zhang Rui Reviewed-by: Len Brown --- tools/power/x86/turbostat/turbostat.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c index f3d44e81d7d5..972f5a9b14e6 100644 --- a/tools/power/x86/turbostat/turbostat.c +++ b/tools/power/x86/turbostat/turbostat.c @@ -635,7 +635,7 @@ static const struct platform_features spr_features = { static const struct platform_features slv_features = { .has_nhm_msrs = 1, .bclk_freq = BCLK_SLV, - .supported_cstates = CC1 | CC3 | CC6 | PC3 | PC6, + .supported_cstates = CC1 | CC3 | CC6 | PC6, .cst_limit = CST_LIMIT_SLV, .trl_msrs = TRL_ATOM, .rapl_msrs = RAPL_PKG | RAPL_CORE, @@ -5829,10 +5829,6 @@ void process_cpuid() do_irtl_snb = has_snb_msrs(family, model); if (has_slv_msrs(family, model)) { - BIC_NOT_PRESENT(BIC_Pkgpc2); - BIC_NOT_PRESENT(BIC_Pkgpc3); - BIC_PRESENT(BIC_Pkgpc6); - BIC_NOT_PRESENT(BIC_Pkgpc7); BIC_PRESENT(BIC_Mod_c6); use_c1_residency_msr = 1; } -- cgit v1.2.3 From 3d982ac0dafeab860b9d42f5cc41a78753275fdd Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Sun, 27 Aug 2023 14:09:20 +0800 Subject: tools/power/turbostat: Adjust cstate for is_jvl() models Disable CC3/CC7/PC2/PC3/PC6/PC7 for is_jvl() models. Delete is_jvl() CPU model check. Signed-off-by: Zhang Rui Reviewed-by: Len Brown --- tools/power/x86/turbostat/turbostat.c | 25 +------------------------ 1 file changed, 1 insertion(+), 24 deletions(-) diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c index 972f5a9b14e6..e95972edde3c 100644 --- a/tools/power/x86/turbostat/turbostat.c +++ b/tools/power/x86/turbostat/turbostat.c @@ -710,7 +710,7 @@ static const struct platform_features tmtd_features = { .has_msr_misc_pwr_mgmt = 1, .has_nhm_msrs = 1, .bclk_freq = BCLK_100MHZ, - .supported_cstates = CC1 | CC3 | CC6 | CC7 | PC2 | PC3 | PC6 | PC7, + .supported_cstates = CC1 | CC6, .cst_limit = CST_LIMIT_GMT, .trl_msrs = TRL_BASE | TRL_CORECOUNT, .rapl_msrs = RAPL_PKG_ALL, @@ -4361,21 +4361,6 @@ int is_ehl(unsigned int family, unsigned int model) return 0; } -int is_jvl(unsigned int family, unsigned int model) -{ - if (!genuine_intel) - return 0; - - if (family != 6) - return 0; - - switch (model) { - case INTEL_FAM6_ATOM_TREMONT_D: - return 1; - } - return 0; -} - static void remove_underbar(char *s) { char *to = s; @@ -5832,14 +5817,6 @@ void process_cpuid() BIC_PRESENT(BIC_Mod_c6); use_c1_residency_msr = 1; } - if (is_jvl(family, model)) { - BIC_NOT_PRESENT(BIC_CPU_c3); - BIC_NOT_PRESENT(BIC_CPU_c7); - BIC_NOT_PRESENT(BIC_Pkgpc2); - BIC_NOT_PRESENT(BIC_Pkgpc3); - BIC_NOT_PRESENT(BIC_Pkgpc6); - BIC_NOT_PRESENT(BIC_Pkgpc7); - } if (is_dnv(family, model)) { BIC_PRESENT(BIC_CPU_c1); BIC_NOT_PRESENT(BIC_CPU_c3); -- cgit v1.2.3 From 8e20ced057423f0edaf40b650facc221e8030b33 Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Sun, 27 Aug 2023 14:12:29 +0800 Subject: tools/power/turbostat: Adjust cstate for is_dnv() models Enable CC1 and disable CC3/CC7/PC3/PC7 for is_dnv() models. Signed-off-by: Zhang Rui Reviewed-by: Len Brown --- tools/power/x86/turbostat/turbostat.c | 7 +------ 1 file changed, 1 insertion(+), 6 deletions(-) diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c index e95972edde3c..069704ef3c80 100644 --- a/tools/power/x86/turbostat/turbostat.c +++ b/tools/power/x86/turbostat/turbostat.c @@ -678,7 +678,7 @@ static const struct platform_features gmtd_features = { .has_nhm_msrs = 1, .bclk_freq = BCLK_100MHZ, .crystal_freq = 25000000, - .supported_cstates = CC1 | CC3 | CC6 | CC7 | PC2 | PC3 | PC6 | PC7, + .supported_cstates = CC1 | CC6 | PC2 | PC6, .cst_limit = CST_LIMIT_GMT, .trl_msrs = TRL_BASE | TRL_CORECOUNT, .rapl_msrs = RAPL_PKG_ALL | RAPL_DRAM_ALL | RAPL_CORE_ENERGY_STATUS, @@ -5818,11 +5818,6 @@ void process_cpuid() use_c1_residency_msr = 1; } if (is_dnv(family, model)) { - BIC_PRESENT(BIC_CPU_c1); - BIC_NOT_PRESENT(BIC_CPU_c3); - BIC_NOT_PRESENT(BIC_Pkgpc3); - BIC_NOT_PRESENT(BIC_CPU_c7); - BIC_NOT_PRESENT(BIC_Pkgpc7); use_c1_residency_msr = 1; } if (is_skx(family, model) || is_icx(family, model) || is_spr(family, model)) { -- cgit v1.2.3 From 24d16bec379db6eea2d72e18c97c6c80e486a5e1 Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Fri, 8 Sep 2023 23:18:27 +0800 Subject: tools/power/turbostat: Adjust cstate for is_skx()/is_icx()/is_spr() models Disable CC3/CC7/PC3/PC7 for is_skx()/is_icx()/is_spr() models. Delete is_skx() CPU model check. Signed-off-by: Zhang Rui Reviewed-by: Len Brown --- tools/power/x86/turbostat/turbostat.c | 28 +++------------------------- 1 file changed, 3 insertions(+), 25 deletions(-) diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c index 069704ef3c80..262af40fe35d 100644 --- a/tools/power/x86/turbostat/turbostat.c +++ b/tools/power/x86/turbostat/turbostat.c @@ -599,7 +599,7 @@ static const struct platform_features skx_features = { .has_nhm_msrs = 1, .has_config_tdp = 1, .bclk_freq = BCLK_100MHZ, - .supported_cstates = CC1 | CC3 | CC6 | CC7 | PC2 | PC3 | PC6 | PC7, + .supported_cstates = CC1 | CC6 | PC2 | PC6, .cst_limit = CST_LIMIT_SKX, .has_cst_auto_convension = 1, .trl_msrs = TRL_BASE | TRL_CORECOUNT, @@ -613,7 +613,7 @@ static const struct platform_features icx_features = { .has_nhm_msrs = 1, .has_config_tdp = 1, .bclk_freq = BCLK_100MHZ, - .supported_cstates = CC1 | CC3 | CC6 | CC7 | PC2 | PC3 | PC6 | PC7, + .supported_cstates = CC1 | CC6 | PC2 | PC6, .cst_limit = CST_LIMIT_ICX, .trl_msrs = TRL_BASE | TRL_CORECOUNT, .rapl_msrs = RAPL_PKG_ALL | RAPL_DRAM_ALL, @@ -626,7 +626,7 @@ static const struct platform_features spr_features = { .has_nhm_msrs = 1, .has_config_tdp = 1, .bclk_freq = BCLK_100MHZ, - .supported_cstates = CC1 | CC3 | CC6 | CC7 | PC2 | PC3 | PC6 | PC7, + .supported_cstates = CC1 | CC6 | PC2 | PC6, .cst_limit = CST_LIMIT_SKX, .trl_msrs = TRL_BASE | TRL_CORECOUNT, .rapl_msrs = RAPL_PKG_ALL | RAPL_DRAM_ALL, @@ -4298,22 +4298,6 @@ int is_bdx(unsigned int family, unsigned int model) return 0; } -int is_skx(unsigned int family, unsigned int model) -{ - - if (!genuine_intel) - return 0; - - if (family != 6) - return 0; - - switch (model) { - case INTEL_FAM6_SKYLAKE_X: - return 1; - } - return 0; -} - int is_icx(unsigned int family, unsigned int model) { @@ -5820,12 +5804,6 @@ void process_cpuid() if (is_dnv(family, model)) { use_c1_residency_msr = 1; } - if (is_skx(family, model) || is_icx(family, model) || is_spr(family, model)) { - BIC_NOT_PRESENT(BIC_CPU_c3); - BIC_NOT_PRESENT(BIC_Pkgpc3); - BIC_NOT_PRESENT(BIC_CPU_c7); - BIC_NOT_PRESENT(BIC_Pkgpc7); - } if (is_bdx(family, model)) { BIC_NOT_PRESENT(BIC_CPU_c7); BIC_NOT_PRESENT(BIC_Pkgpc7); -- cgit v1.2.3 From 1109694817fb4fcdfccb1a86fd58e69fb60f4eab Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Sun, 27 Aug 2023 14:16:52 +0800 Subject: tools/power/turbostat: Adjust cstate for is_bdx() models Disable CC7/PC7 for is_bdx() models. Delete is_bdx() CPU model check. Signed-off-by: Zhang Rui Reviewed-by: Len Brown --- tools/power/x86/turbostat/turbostat.c | 22 +--------------------- 1 file changed, 1 insertion(+), 21 deletions(-) diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c index 262af40fe35d..27ca29f0545a 100644 --- a/tools/power/x86/turbostat/turbostat.c +++ b/tools/power/x86/turbostat/turbostat.c @@ -556,7 +556,7 @@ static const struct platform_features bdx_features = { .has_nhm_msrs = 1, .has_config_tdp = 1, .bclk_freq = BCLK_100MHZ, - .supported_cstates = CC1 | CC3 | CC6 | CC7 | PC2 | PC3 | PC6 | PC7, + .supported_cstates = CC1 | CC3 | CC6 | PC2 | PC3 | PC6, .cst_limit = CST_LIMIT_HSW, .has_cst_auto_convension = 1, .trl_msrs = TRL_BASE, @@ -4282,22 +4282,6 @@ int is_dnv(unsigned int family, unsigned int model) return 0; } -int is_bdx(unsigned int family, unsigned int model) -{ - - if (!genuine_intel) - return 0; - - if (family != 6) - return 0; - - switch (model) { - case INTEL_FAM6_BROADWELL_X: - return 1; - } - return 0; -} - int is_icx(unsigned int family, unsigned int model) { @@ -5804,10 +5788,6 @@ void process_cpuid() if (is_dnv(family, model)) { use_c1_residency_msr = 1; } - if (is_bdx(family, model)) { - BIC_NOT_PRESENT(BIC_CPU_c7); - BIC_NOT_PRESENT(BIC_Pkgpc7); - } if (has_c8910_msrs(family, model)) { if (pkg_cstate_limit >= PCL__8) BIC_PRESENT(BIC_Pkgpc8); -- cgit v1.2.3 From 4d2c95d40a90877ffd8f961055419f1f550a7ed9 Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Sun, 27 Aug 2023 14:20:02 +0800 Subject: tools/power/turbostat: Adjust cstate for has_c8910_msrs() models Enable PC8/PC9/PC10 for has_c8910_msrs() models. Signed-off-by: Zhang Rui Reviewed-by: Len Brown --- tools/power/x86/turbostat/turbostat.c | 22 +++++++--------------- 1 file changed, 7 insertions(+), 15 deletions(-) diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c index 27ca29f0545a..b0bc973c077d 100644 --- a/tools/power/x86/turbostat/turbostat.c +++ b/tools/power/x86/turbostat/turbostat.c @@ -506,7 +506,7 @@ static const struct platform_features hswl_features = { .has_nhm_msrs = 1, .has_config_tdp = 1, .bclk_freq = BCLK_100MHZ, - .supported_cstates = CC1 | CC3 | CC6 | CC7 | PC2 | PC3 | PC6 | PC7, + .supported_cstates = CC1 | CC3 | CC6 | CC7 | PC2 | PC3 | PC6 | PC7 | PC8 | PC9 | PC10, .cst_limit = CST_LIMIT_HSW, .trl_msrs = TRL_BASE, .plr_msrs = PLR_CORE | PLR_GFX | PLR_RING, @@ -532,7 +532,7 @@ static const struct platform_features bdw_features = { .has_nhm_msrs = 1, .has_config_tdp = 1, .bclk_freq = BCLK_100MHZ, - .supported_cstates = CC1 | CC3 | CC6 | CC7 | PC2 | PC3 | PC6 | PC7, + .supported_cstates = CC1 | CC3 | CC6 | CC7 | PC2 | PC3 | PC6 | PC7 | PC8 | PC9 | PC10, .cst_limit = CST_LIMIT_HSW, .trl_msrs = TRL_BASE, .rapl_msrs = RAPL_PKG | RAPL_CORE_ALL | RAPL_GFX | RAPL_PKG_POWER_INFO, @@ -571,7 +571,7 @@ static const struct platform_features skl_features = { .has_config_tdp = 1, .bclk_freq = BCLK_100MHZ, .crystal_freq = 24000000, - .supported_cstates = CC1 | CC3 | CC6 | CC7 | PC2 | PC3 | PC6 | PC7, + .supported_cstates = CC1 | CC3 | CC6 | CC7 | PC2 | PC3 | PC6 | PC7 | PC8 | PC9 | PC10, .cst_limit = CST_LIMIT_HSW, .trl_msrs = TRL_BASE, .tcc_offset_bits = 6, @@ -585,7 +585,7 @@ static const struct platform_features cnl_features = { .has_nhm_msrs = 1, .has_config_tdp = 1, .bclk_freq = BCLK_100MHZ, - .supported_cstates = CC1 | CC3 | CC6 | CC7 | PC2 | PC3 | PC6 | PC7, + .supported_cstates = CC1 | CC3 | CC6 | CC7 | PC2 | PC3 | PC6 | PC7 | PC8 | PC9 | PC10, .cst_limit = CST_LIMIT_HSW, .trl_msrs = TRL_BASE, .tcc_offset_bits = 6, @@ -667,7 +667,7 @@ static const struct platform_features gmt_features = { .has_nhm_msrs = 1, .bclk_freq = BCLK_100MHZ, .crystal_freq = 19200000, - .supported_cstates = CC1 | CC3 | CC6 | CC7 | PC2 | PC3 | PC6 | PC7, + .supported_cstates = CC1 | CC3 | CC6 | CC7 | PC2 | PC3 | PC6 | PC7 | PC8 | PC9 | PC10, .cst_limit = CST_LIMIT_GMT, .trl_msrs = TRL_BASE | TRL_CORECOUNT, .rapl_msrs = RAPL_PKG | RAPL_PKG_POWER_INFO, @@ -689,7 +689,7 @@ static const struct platform_features gmtp_features = { .has_nhm_msrs = 1, .bclk_freq = BCLK_100MHZ, .crystal_freq = 19200000, - .supported_cstates = CC1 | CC3 | CC6 | CC7 | PC2 | PC3 | PC6 | PC7, + .supported_cstates = CC1 | CC3 | CC6 | CC7 | PC2 | PC3 | PC6 | PC7 | PC8 | PC9 | PC10, .cst_limit = CST_LIMIT_GMT, .trl_msrs = TRL_BASE, .rapl_msrs = RAPL_PKG | RAPL_PKG_POWER_INFO, @@ -699,7 +699,7 @@ static const struct platform_features tmt_features = { .has_msr_misc_pwr_mgmt = 1, .has_nhm_msrs = 1, .bclk_freq = BCLK_100MHZ, - .supported_cstates = CC1 | CC3 | CC6 | CC7 | PC2 | PC3 | PC6 | PC7, + .supported_cstates = CC1 | CC3 | CC6 | CC7 | PC2 | PC3 | PC6 | PC7 | PC8 | PC9 | PC10, .cst_limit = CST_LIMIT_GMT, .trl_msrs = TRL_BASE, .rapl_msrs = RAPL_PKG_ALL | RAPL_CORE_ALL | RAPL_DRAM | RAPL_DRAM_PERF_STATUS | RAPL_GFX, @@ -5788,14 +5788,6 @@ void process_cpuid() if (is_dnv(family, model)) { use_c1_residency_msr = 1; } - if (has_c8910_msrs(family, model)) { - if (pkg_cstate_limit >= PCL__8) - BIC_PRESENT(BIC_Pkgpc8); - if (pkg_cstate_limit >= PCL__9) - BIC_PRESENT(BIC_Pkgpc9); - if (pkg_cstate_limit >= PCL_10) - BIC_PRESENT(BIC_Pkgpc10); - } do_irtl_hsw = has_c8910_msrs(family, model); if (has_skl_msrs(family, model)) { BIC_PRESENT(BIC_Totl_c0); -- cgit v1.2.3 From cd7a2b6a61100a0fe8a40916d1afbd72d8833d57 Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Sun, 27 Aug 2023 14:24:19 +0800 Subject: tools/power/turbostat: Adjust cstate for is_slm()/is_knl()/is_cnl()/is_ehl() models Disable CC3 for is_slm()/is_knl()/is_cnl()/is_ehl() models. Delete is_cnl()/is_ehl() CPU model checks. Signed-off-by: Zhang Rui Reviewed-by: Len Brown --- tools/power/x86/turbostat/turbostat.c | 44 ++++------------------------------- 1 file changed, 5 insertions(+), 39 deletions(-) diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c index b0bc973c077d..24f470883ca2 100644 --- a/tools/power/x86/turbostat/turbostat.c +++ b/tools/power/x86/turbostat/turbostat.c @@ -585,7 +585,7 @@ static const struct platform_features cnl_features = { .has_nhm_msrs = 1, .has_config_tdp = 1, .bclk_freq = BCLK_100MHZ, - .supported_cstates = CC1 | CC3 | CC6 | CC7 | PC2 | PC3 | PC6 | PC7 | PC8 | PC9 | PC10, + .supported_cstates = CC1 | CC6 | CC7 | PC2 | PC3 | PC6 | PC7 | PC8 | PC9 | PC10, .cst_limit = CST_LIMIT_HSW, .trl_msrs = TRL_BASE, .tcc_offset_bits = 6, @@ -635,7 +635,7 @@ static const struct platform_features spr_features = { static const struct platform_features slv_features = { .has_nhm_msrs = 1, .bclk_freq = BCLK_SLV, - .supported_cstates = CC1 | CC3 | CC6 | PC6, + .supported_cstates = CC1 | CC6 | PC6, .cst_limit = CST_LIMIT_SLV, .trl_msrs = TRL_ATOM, .rapl_msrs = RAPL_PKG | RAPL_CORE, @@ -647,7 +647,7 @@ static const struct platform_features slvd_features = { .has_msr_misc_pwr_mgmt = 1, .has_nhm_msrs = 1, .bclk_freq = BCLK_SLV, - .supported_cstates = CC1 | CC3 | CC6 | PC3 | PC6, + .supported_cstates = CC1 | CC6 | PC3 | PC6, .cst_limit = CST_LIMIT_SLV, .trl_msrs = TRL_BASE, .rapl_msrs = RAPL_PKG | RAPL_CORE, @@ -699,7 +699,7 @@ static const struct platform_features tmt_features = { .has_msr_misc_pwr_mgmt = 1, .has_nhm_msrs = 1, .bclk_freq = BCLK_100MHZ, - .supported_cstates = CC1 | CC3 | CC6 | CC7 | PC2 | PC3 | PC6 | PC7 | PC8 | PC9 | PC10, + .supported_cstates = CC1 | CC6 | CC7 | PC2 | PC3 | PC6 | PC7 | PC8 | PC9 | PC10, .cst_limit = CST_LIMIT_GMT, .trl_msrs = TRL_BASE, .rapl_msrs = RAPL_PKG_ALL | RAPL_CORE_ALL | RAPL_DRAM | RAPL_DRAM_PERF_STATUS | RAPL_GFX, @@ -721,7 +721,7 @@ static const struct platform_features knl_features = { .has_nhm_msrs = 1, .has_config_tdp = 1, .bclk_freq = BCLK_100MHZ, - .supported_cstates = CC1 | CC3 | CC6 | PC3 | PC6, + .supported_cstates = CC1 | CC6 | PC3 | PC6, .cst_limit = CST_LIMIT_KNL, .trl_msrs = TRL_KNL, .rapl_msrs = RAPL_PKG_ALL | RAPL_DRAM_ALL, @@ -4314,21 +4314,6 @@ int is_spr(unsigned int family, unsigned int model) return 0; } -int is_ehl(unsigned int family, unsigned int model) -{ - if (!genuine_intel) - return 0; - - if (family != 6) - return 0; - - switch (model) { - case INTEL_FAM6_ATOM_TREMONT: - return 1; - } - return 0; -} - static void remove_underbar(char *s) { char *to = s; @@ -5248,22 +5233,6 @@ int is_knl(unsigned int family, unsigned int model) return 0; } -int is_cnl(unsigned int family, unsigned int model) -{ - if (!genuine_intel) - return 0; - - if (family != 6) - return 0; - - switch (model) { - case INTEL_FAM6_CANNONLAKE_L: /* CNL */ - return 1; - } - - return 0; -} - unsigned int get_aperf_mperf_multiplier(unsigned int family, unsigned int model) { if (is_knl(family, model)) @@ -5798,9 +5767,6 @@ void process_cpuid() do_slm_cstates = is_slm(family, model); do_knl_cstates = is_knl(family, model); - if (do_slm_cstates || do_knl_cstates || is_cnl(family, model) || is_ehl(family, model)) - BIC_NOT_PRESENT(BIC_CPU_c3); - if (!quiet) decode_misc_pwr_mgmt_msr(); -- cgit v1.2.3 From 8c382f9e74663072805565036026d4e79de96425 Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Sun, 27 Aug 2023 14:27:26 +0800 Subject: tools/power/turbostat: Use fine grained IRTL output It is pointless to dump the IRTL register for a package cstate that is not supported by the platform. Print IRTL only for states that are available in platform->supported_cstates. Delete has_c8910_msrs() CPU model check. Signed-off-by: Zhang Rui Reviewed-by: Len Brown --- tools/power/x86/turbostat/turbostat.c | 99 +++++++++++++---------------------- 1 file changed, 36 insertions(+), 63 deletions(-) diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c index 24f470883ca2..680373010b01 100644 --- a/tools/power/x86/turbostat/turbostat.c +++ b/tools/power/x86/turbostat/turbostat.c @@ -229,7 +229,6 @@ unsigned int has_epb; unsigned int has_turbo; unsigned int is_hybrid; unsigned int do_irtl_snb; -unsigned int do_irtl_hsw; unsigned int units = 1000000; /* MHz etc */ unsigned int genuine_intel; unsigned int authentic_amd; @@ -3269,39 +3268,47 @@ void print_irtl(void) { unsigned long long msr; - get_msr(base_cpu, MSR_PKGC3_IRTL, &msr); - fprintf(outf, "cpu%d: MSR_PKGC3_IRTL: 0x%08llx (", base_cpu, msr); - fprintf(outf, "%svalid, %lld ns)\n", msr & (1 << 15) ? "" : "NOT", - (msr & 0x3FF) * irtl_time_units[(msr >> 10) & 0x3]); - - get_msr(base_cpu, MSR_PKGC6_IRTL, &msr); - fprintf(outf, "cpu%d: MSR_PKGC6_IRTL: 0x%08llx (", base_cpu, msr); - fprintf(outf, "%svalid, %lld ns)\n", msr & (1 << 15) ? "" : "NOT", - (msr & 0x3FF) * irtl_time_units[(msr >> 10) & 0x3]); - - get_msr(base_cpu, MSR_PKGC7_IRTL, &msr); - fprintf(outf, "cpu%d: MSR_PKGC7_IRTL: 0x%08llx (", base_cpu, msr); - fprintf(outf, "%svalid, %lld ns)\n", msr & (1 << 15) ? "" : "NOT", - (msr & 0x3FF) * irtl_time_units[(msr >> 10) & 0x3]); + if (platform->supported_cstates & PC3) { + get_msr(base_cpu, MSR_PKGC3_IRTL, &msr); + fprintf(outf, "cpu%d: MSR_PKGC3_IRTL: 0x%08llx (", base_cpu, msr); + fprintf(outf, "%svalid, %lld ns)\n", msr & (1 << 15) ? "" : "NOT", + (msr & 0x3FF) * irtl_time_units[(msr >> 10) & 0x3]); + } - if (!do_irtl_hsw) - return; + if (platform->supported_cstates & PC6) { + get_msr(base_cpu, MSR_PKGC6_IRTL, &msr); + fprintf(outf, "cpu%d: MSR_PKGC6_IRTL: 0x%08llx (", base_cpu, msr); + fprintf(outf, "%svalid, %lld ns)\n", msr & (1 << 15) ? "" : "NOT", + (msr & 0x3FF) * irtl_time_units[(msr >> 10) & 0x3]); + } - get_msr(base_cpu, MSR_PKGC8_IRTL, &msr); - fprintf(outf, "cpu%d: MSR_PKGC8_IRTL: 0x%08llx (", base_cpu, msr); - fprintf(outf, "%svalid, %lld ns)\n", msr & (1 << 15) ? "" : "NOT", - (msr & 0x3FF) * irtl_time_units[(msr >> 10) & 0x3]); + if (platform->supported_cstates & PC7) { + get_msr(base_cpu, MSR_PKGC7_IRTL, &msr); + fprintf(outf, "cpu%d: MSR_PKGC7_IRTL: 0x%08llx (", base_cpu, msr); + fprintf(outf, "%svalid, %lld ns)\n", msr & (1 << 15) ? "" : "NOT", + (msr & 0x3FF) * irtl_time_units[(msr >> 10) & 0x3]); + } - get_msr(base_cpu, MSR_PKGC9_IRTL, &msr); - fprintf(outf, "cpu%d: MSR_PKGC9_IRTL: 0x%08llx (", base_cpu, msr); - fprintf(outf, "%svalid, %lld ns)\n", msr & (1 << 15) ? "" : "NOT", - (msr & 0x3FF) * irtl_time_units[(msr >> 10) & 0x3]); + if (platform->supported_cstates & PC8) { + get_msr(base_cpu, MSR_PKGC8_IRTL, &msr); + fprintf(outf, "cpu%d: MSR_PKGC8_IRTL: 0x%08llx (", base_cpu, msr); + fprintf(outf, "%svalid, %lld ns)\n", msr & (1 << 15) ? "" : "NOT", + (msr & 0x3FF) * irtl_time_units[(msr >> 10) & 0x3]); + } - get_msr(base_cpu, MSR_PKGC10_IRTL, &msr); - fprintf(outf, "cpu%d: MSR_PKGC10_IRTL: 0x%08llx (", base_cpu, msr); - fprintf(outf, "%svalid, %lld ns)\n", msr & (1 << 15) ? "" : "NOT", - (msr & 0x3FF) * irtl_time_units[(msr >> 10) & 0x3]); + if (platform->supported_cstates & PC9) { + get_msr(base_cpu, MSR_PKGC9_IRTL, &msr); + fprintf(outf, "cpu%d: MSR_PKGC9_IRTL: 0x%08llx (", base_cpu, msr); + fprintf(outf, "%svalid, %lld ns)\n", msr & (1 << 15) ? "" : "NOT", + (msr & 0x3FF) * irtl_time_units[(msr >> 10) & 0x3]); + } + if (platform->supported_cstates & PC10) { + get_msr(base_cpu, MSR_PKGC10_IRTL, &msr); + fprintf(outf, "cpu%d: MSR_PKGC10_IRTL: 0x%08llx (", base_cpu, msr); + fprintf(outf, "%svalid, %lld ns)\n", msr & (1 << 15) ? "" : "NOT", + (msr & 0x3FF) * irtl_time_units[(msr >> 10) & 0x3]); + } } void free_fd_percpu(void) @@ -5145,39 +5152,6 @@ int has_snb_msrs(unsigned int family, unsigned int model) return 0; } -/* - * HSW ULT added support for C8/C9/C10 MSRs: - * - * MSR_PKG_C8_RESIDENCY 0x00000630 - * MSR_PKG_C9_RESIDENCY 0x00000631 - * MSR_PKG_C10_RESIDENCY 0x00000632 - * - * MSR_PKGC8_IRTL 0x00000633 - * MSR_PKGC9_IRTL 0x00000634 - * MSR_PKGC10_IRTL 0x00000635 - * - */ -int has_c8910_msrs(unsigned int family, unsigned int model) -{ - if (!genuine_intel) - return 0; - - if (family != 6) - return 0; - - switch (model) { - case INTEL_FAM6_HASWELL_L: /* HSW */ - case INTEL_FAM6_BROADWELL: /* BDW */ - case INTEL_FAM6_SKYLAKE_L: /* SKL */ - case INTEL_FAM6_CANNONLAKE_L: /* CNL */ - case INTEL_FAM6_ATOM_GOLDMONT: /* BXT */ - case INTEL_FAM6_ATOM_GOLDMONT_PLUS: - case INTEL_FAM6_ATOM_TREMONT: /* EHL */ - return 1; - } - return 0; -} - /* * SKL adds support for additional MSRS: * @@ -5757,7 +5731,6 @@ void process_cpuid() if (is_dnv(family, model)) { use_c1_residency_msr = 1; } - do_irtl_hsw = has_c8910_msrs(family, model); if (has_skl_msrs(family, model)) { BIC_PRESENT(BIC_Totl_c0); BIC_PRESENT(BIC_Any_c0); -- cgit v1.2.3 From 148df4fd04a98fb24198ecb4419c87e07d38af30 Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Fri, 8 Sep 2023 23:18:51 +0800 Subject: tools/power/turbostat: Abstract IRTL support Abstract the support for MSR_PKGC3/PKGC6/PKGC7/PKGC8/PKGC9/PKGC10_IRTL. Delete has_snb_msrs() CPU model check. Signed-off-by: Zhang Rui Reviewed-by: Len Brown --- tools/power/x86/turbostat/turbostat.c | 72 +++++++++++++---------------------- 1 file changed, 26 insertions(+), 46 deletions(-) diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c index 680373010b01..44be06b763b2 100644 --- a/tools/power/x86/turbostat/turbostat.c +++ b/tools/power/x86/turbostat/turbostat.c @@ -228,7 +228,6 @@ unsigned int has_aperf; unsigned int has_epb; unsigned int has_turbo; unsigned int is_hybrid; -unsigned int do_irtl_snb; unsigned int units = 1000000; /* MHz etc */ unsigned int genuine_intel; unsigned int authentic_amd; @@ -284,6 +283,7 @@ struct platform_features { int supported_cstates; /* Core cstates and Package cstates supported */ int cst_limit; /* MSR_PKG_CST_CONFIG_CONTROL */ bool has_cst_auto_convension; /* AUTOMATIC_CSTATE_CONVERSION bit in MSR_PKG_CST_CONFIG_CONTROL */ + bool has_irtl_msrs; /* MSR_PKGC3/PKGC6/PKGC7/PKGC8/PKGC9/PKGC10_IRTL */ int trl_msrs; /* MSR_TURBO_RATIO_LIMIT/LIMIT1/LIMIT2/SECONDARY, Atom TRL MSRs */ int plr_msrs; /* MSR_CORE/GFX/RING_PERF_LIMIT_REASONS */ int rapl_msrs; /* RAPL PKG/DRAM/CORE/GFX MSRs, AMD RAPL MSRs */ @@ -434,6 +434,7 @@ static const struct platform_features snb_features = { .bclk_freq = BCLK_100MHZ, .supported_cstates = CC1 | CC3 | CC6 | CC7 | PC2 | PC3 | PC6 | PC7, .cst_limit = CST_LIMIT_SNB, + .has_irtl_msrs = 1, .trl_msrs = TRL_BASE, .rapl_msrs = RAPL_PKG | RAPL_CORE_ALL | RAPL_GFX | RAPL_PKG_POWER_INFO, }; @@ -445,6 +446,7 @@ static const struct platform_features snx_features = { .bclk_freq = BCLK_100MHZ, .supported_cstates = CC1 | CC3 | CC6 | CC7 | PC2 | PC3 | PC6 | PC7, .cst_limit = CST_LIMIT_SNB, + .has_irtl_msrs = 1, .trl_msrs = TRL_BASE, .rapl_msrs = RAPL_PKG_ALL | RAPL_CORE_ALL | RAPL_DRAM_ALL, }; @@ -457,6 +459,7 @@ static const struct platform_features ivb_features = { .bclk_freq = BCLK_100MHZ, .supported_cstates = CC1 | CC3 | CC6 | CC7 | PC2 | PC3 | PC6 | PC7, .cst_limit = CST_LIMIT_SNB, + .has_irtl_msrs = 1, .trl_msrs = TRL_BASE, .rapl_msrs = RAPL_PKG | RAPL_CORE_ALL | RAPL_GFX | RAPL_PKG_POWER_INFO, }; @@ -468,6 +471,7 @@ static const struct platform_features ivx_features = { .bclk_freq = BCLK_100MHZ, .supported_cstates = CC1 | CC3 | CC6 | CC7 | PC2 | PC3 | PC6 | PC7, .cst_limit = CST_LIMIT_SNB, + .has_irtl_msrs = 1, .trl_msrs = TRL_BASE | TRL_LIMIT1, .rapl_msrs = RAPL_PKG_ALL | RAPL_CORE_ALL | RAPL_DRAM_ALL, }; @@ -480,6 +484,7 @@ static const struct platform_features hsw_features = { .bclk_freq = BCLK_100MHZ, .supported_cstates = CC1 | CC3 | CC6 | CC7 | PC2 | PC3 | PC6 | PC7, .cst_limit = CST_LIMIT_HSW, + .has_irtl_msrs = 1, .trl_msrs = TRL_BASE, .plr_msrs = PLR_CORE | PLR_GFX | PLR_RING, .rapl_msrs = RAPL_PKG | RAPL_CORE_ALL | RAPL_GFX | RAPL_PKG_POWER_INFO, @@ -493,6 +498,7 @@ static const struct platform_features hsx_features = { .bclk_freq = BCLK_100MHZ, .supported_cstates = CC1 | CC3 | CC6 | CC7 | PC2 | PC3 | PC6 | PC7, .cst_limit = CST_LIMIT_HSW, + .has_irtl_msrs = 1, .trl_msrs = TRL_BASE | TRL_LIMIT1 | TRL_LIMIT2, .plr_msrs = PLR_CORE | PLR_RING, .rapl_msrs = RAPL_PKG_ALL | RAPL_DRAM_ALL, @@ -507,6 +513,7 @@ static const struct platform_features hswl_features = { .bclk_freq = BCLK_100MHZ, .supported_cstates = CC1 | CC3 | CC6 | CC7 | PC2 | PC3 | PC6 | PC7 | PC8 | PC9 | PC10, .cst_limit = CST_LIMIT_HSW, + .has_irtl_msrs = 1, .trl_msrs = TRL_BASE, .plr_msrs = PLR_CORE | PLR_GFX | PLR_RING, .rapl_msrs = RAPL_PKG | RAPL_CORE_ALL | RAPL_GFX | RAPL_PKG_POWER_INFO, @@ -520,6 +527,7 @@ static const struct platform_features hswg_features = { .bclk_freq = BCLK_100MHZ, .supported_cstates = CC1 | CC3 | CC6 | CC7 | PC2 | PC3 | PC6 | PC7, .cst_limit = CST_LIMIT_HSW, + .has_irtl_msrs = 1, .trl_msrs = TRL_BASE, .plr_msrs = PLR_CORE | PLR_GFX | PLR_RING, .rapl_msrs = RAPL_PKG | RAPL_CORE_ALL | RAPL_GFX | RAPL_PKG_POWER_INFO, @@ -533,6 +541,7 @@ static const struct platform_features bdw_features = { .bclk_freq = BCLK_100MHZ, .supported_cstates = CC1 | CC3 | CC6 | CC7 | PC2 | PC3 | PC6 | PC7 | PC8 | PC9 | PC10, .cst_limit = CST_LIMIT_HSW, + .has_irtl_msrs = 1, .trl_msrs = TRL_BASE, .rapl_msrs = RAPL_PKG | RAPL_CORE_ALL | RAPL_GFX | RAPL_PKG_POWER_INFO, }; @@ -545,6 +554,7 @@ static const struct platform_features bdwg_features = { .bclk_freq = BCLK_100MHZ, .supported_cstates = CC1 | CC3 | CC6 | CC7 | PC2 | PC3 | PC6 | PC7, .cst_limit = CST_LIMIT_HSW, + .has_irtl_msrs = 1, .trl_msrs = TRL_BASE, .rapl_msrs = RAPL_PKG | RAPL_CORE_ALL | RAPL_GFX | RAPL_PKG_POWER_INFO, }; @@ -557,6 +567,7 @@ static const struct platform_features bdx_features = { .bclk_freq = BCLK_100MHZ, .supported_cstates = CC1 | CC3 | CC6 | PC2 | PC3 | PC6, .cst_limit = CST_LIMIT_HSW, + .has_irtl_msrs = 1, .has_cst_auto_convension = 1, .trl_msrs = TRL_BASE, .rapl_msrs = RAPL_PKG_ALL | RAPL_DRAM_ALL, @@ -572,6 +583,7 @@ static const struct platform_features skl_features = { .crystal_freq = 24000000, .supported_cstates = CC1 | CC3 | CC6 | CC7 | PC2 | PC3 | PC6 | PC7 | PC8 | PC9 | PC10, .cst_limit = CST_LIMIT_HSW, + .has_irtl_msrs = 1, .trl_msrs = TRL_BASE, .tcc_offset_bits = 6, .rapl_msrs = RAPL_PKG_ALL | RAPL_CORE_ALL | RAPL_DRAM | RAPL_DRAM_PERF_STATUS | RAPL_GFX, @@ -586,6 +598,7 @@ static const struct platform_features cnl_features = { .bclk_freq = BCLK_100MHZ, .supported_cstates = CC1 | CC6 | CC7 | PC2 | PC3 | PC6 | PC7 | PC8 | PC9 | PC10, .cst_limit = CST_LIMIT_HSW, + .has_irtl_msrs = 1, .trl_msrs = TRL_BASE, .tcc_offset_bits = 6, .rapl_msrs = RAPL_PKG_ALL | RAPL_CORE_ALL | RAPL_DRAM | RAPL_DRAM_PERF_STATUS | RAPL_GFX, @@ -600,6 +613,7 @@ static const struct platform_features skx_features = { .bclk_freq = BCLK_100MHZ, .supported_cstates = CC1 | CC6 | PC2 | PC6, .cst_limit = CST_LIMIT_SKX, + .has_irtl_msrs = 1, .has_cst_auto_convension = 1, .trl_msrs = TRL_BASE | TRL_CORECOUNT, .rapl_msrs = RAPL_PKG_ALL | RAPL_DRAM_ALL, @@ -614,6 +628,7 @@ static const struct platform_features icx_features = { .bclk_freq = BCLK_100MHZ, .supported_cstates = CC1 | CC6 | PC2 | PC6, .cst_limit = CST_LIMIT_ICX, + .has_irtl_msrs = 1, .trl_msrs = TRL_BASE | TRL_CORECOUNT, .rapl_msrs = RAPL_PKG_ALL | RAPL_DRAM_ALL, .has_fixed_rapl_unit = 1, @@ -627,6 +642,7 @@ static const struct platform_features spr_features = { .bclk_freq = BCLK_100MHZ, .supported_cstates = CC1 | CC6 | PC2 | PC6, .cst_limit = CST_LIMIT_SKX, + .has_irtl_msrs = 1, .trl_msrs = TRL_BASE | TRL_CORECOUNT, .rapl_msrs = RAPL_PKG_ALL | RAPL_DRAM_ALL, }; @@ -668,6 +684,7 @@ static const struct platform_features gmt_features = { .crystal_freq = 19200000, .supported_cstates = CC1 | CC3 | CC6 | CC7 | PC2 | PC3 | PC6 | PC7 | PC8 | PC9 | PC10, .cst_limit = CST_LIMIT_GMT, + .has_irtl_msrs = 1, .trl_msrs = TRL_BASE | TRL_CORECOUNT, .rapl_msrs = RAPL_PKG | RAPL_PKG_POWER_INFO, }; @@ -679,6 +696,7 @@ static const struct platform_features gmtd_features = { .crystal_freq = 25000000, .supported_cstates = CC1 | CC6 | PC2 | PC6, .cst_limit = CST_LIMIT_GMT, + .has_irtl_msrs = 1, .trl_msrs = TRL_BASE | TRL_CORECOUNT, .rapl_msrs = RAPL_PKG_ALL | RAPL_DRAM_ALL | RAPL_CORE_ENERGY_STATUS, }; @@ -690,6 +708,7 @@ static const struct platform_features gmtp_features = { .crystal_freq = 19200000, .supported_cstates = CC1 | CC3 | CC6 | CC7 | PC2 | PC3 | PC6 | PC7 | PC8 | PC9 | PC10, .cst_limit = CST_LIMIT_GMT, + .has_irtl_msrs = 1, .trl_msrs = TRL_BASE, .rapl_msrs = RAPL_PKG | RAPL_PKG_POWER_INFO, }; @@ -700,6 +719,7 @@ static const struct platform_features tmt_features = { .bclk_freq = BCLK_100MHZ, .supported_cstates = CC1 | CC6 | CC7 | PC2 | PC3 | PC6 | PC7 | PC8 | PC9 | PC10, .cst_limit = CST_LIMIT_GMT, + .has_irtl_msrs = 1, .trl_msrs = TRL_BASE, .rapl_msrs = RAPL_PKG_ALL | RAPL_CORE_ALL | RAPL_DRAM | RAPL_DRAM_PERF_STATUS | RAPL_GFX, .enable_tsc_tweak = 1, @@ -711,6 +731,7 @@ static const struct platform_features tmtd_features = { .bclk_freq = BCLK_100MHZ, .supported_cstates = CC1 | CC6, .cst_limit = CST_LIMIT_GMT, + .has_irtl_msrs = 1, .trl_msrs = TRL_BASE | TRL_CORECOUNT, .rapl_msrs = RAPL_PKG_ALL, }; @@ -3268,6 +3289,9 @@ void print_irtl(void) { unsigned long long msr; + if (!platform->has_irtl_msrs) + return; + if (platform->supported_cstates & PC3) { get_msr(base_cpu, MSR_PKGC3_IRTL, &msr); fprintf(outf, "cpu%d: MSR_PKGC3_IRTL: 0x%08llx (", base_cpu, msr); @@ -5109,49 +5133,6 @@ int print_rapl(struct thread_data *t, struct core_data *c, struct pkg_data *p) return 0; } -/* - * SNB adds support for additional MSRs: - * - * MSR_PKG_C7_RESIDENCY 0x000003fa - * MSR_CORE_C7_RESIDENCY 0x000003fe - * MSR_PKG_C2_RESIDENCY 0x0000060d - */ - -int has_snb_msrs(unsigned int family, unsigned int model) -{ - if (!genuine_intel) - return 0; - - if (family != 6) - return 0; - - switch (model) { - case INTEL_FAM6_SANDYBRIDGE: - case INTEL_FAM6_SANDYBRIDGE_X: - case INTEL_FAM6_IVYBRIDGE: /* IVB */ - case INTEL_FAM6_IVYBRIDGE_X: /* IVB Xeon */ - case INTEL_FAM6_HASWELL: /* HSW */ - case INTEL_FAM6_HASWELL_X: /* HSW */ - case INTEL_FAM6_HASWELL_L: /* HSW */ - case INTEL_FAM6_HASWELL_G: /* HSW */ - case INTEL_FAM6_BROADWELL: /* BDW */ - case INTEL_FAM6_BROADWELL_G: /* BDW */ - case INTEL_FAM6_BROADWELL_X: /* BDX */ - case INTEL_FAM6_SKYLAKE_L: /* SKL */ - case INTEL_FAM6_CANNONLAKE_L: /* CNL */ - case INTEL_FAM6_SKYLAKE_X: /* SKX */ - case INTEL_FAM6_ICELAKE_X: /* ICX */ - case INTEL_FAM6_SAPPHIRERAPIDS_X: /* SPR */ - case INTEL_FAM6_ATOM_GOLDMONT: /* BXT */ - case INTEL_FAM6_ATOM_GOLDMONT_PLUS: - case INTEL_FAM6_ATOM_GOLDMONT_D: /* DNV */ - case INTEL_FAM6_ATOM_TREMONT: /* EHL */ - case INTEL_FAM6_ATOM_TREMONT_D: /* JVL */ - return 1; - } - return 0; -} - /* * SKL adds support for additional MSRS: * @@ -5723,7 +5704,6 @@ void process_cpuid() BIC_PRESENT(BIC_SMI); probe_bclk(); - do_irtl_snb = has_snb_msrs(family, model); if (has_slv_msrs(family, model)) { BIC_PRESENT(BIC_Mod_c6); use_c1_residency_msr = 1; @@ -6098,7 +6078,7 @@ void turbostat_init() if (!quiet) for_all_cpus(print_thermal, ODD_COUNTERS); - if (!quiet && do_irtl_snb) + if (!quiet) print_irtl(); if (DO_BIC(BIC_IPC)) -- cgit v1.2.3 From 76d83d2ae8e3099d9a6bd67fba918108824d7d4d Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Sun, 27 Aug 2023 14:41:30 +0800 Subject: tools/power/turbostat: Abstract MSR_CORE_C1_RES support Abstract the support for MSR_CORE_C1_RES. Delete is_dnv() CPU model check. Signed-off-by: Zhang Rui Reviewed-by: Len Brown --- tools/power/x86/turbostat/turbostat.c | 30 ++++++------------------------ 1 file changed, 6 insertions(+), 24 deletions(-) diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c index 44be06b763b2..de9260c96678 100644 --- a/tools/power/x86/turbostat/turbostat.c +++ b/tools/power/x86/turbostat/turbostat.c @@ -223,7 +223,6 @@ unsigned int list_header_only; unsigned int dump_only; unsigned int do_knl_cstates; unsigned int do_slm_cstates; -unsigned int use_c1_residency_msr; unsigned int has_aperf; unsigned int has_epb; unsigned int has_turbo; @@ -284,6 +283,7 @@ struct platform_features { int cst_limit; /* MSR_PKG_CST_CONFIG_CONTROL */ bool has_cst_auto_convension; /* AUTOMATIC_CSTATE_CONVERSION bit in MSR_PKG_CST_CONFIG_CONTROL */ bool has_irtl_msrs; /* MSR_PKGC3/PKGC6/PKGC7/PKGC8/PKGC9/PKGC10_IRTL */ + bool has_msr_core_c1_res; /* MSR_CORE_C1_RES */ int trl_msrs; /* MSR_TURBO_RATIO_LIMIT/LIMIT1/LIMIT2/SECONDARY, Atom TRL MSRs */ int plr_msrs; /* MSR_CORE/GFX/RING_PERF_LIMIT_REASONS */ int rapl_msrs; /* RAPL PKG/DRAM/CORE/GFX MSRs, AMD RAPL MSRs */ @@ -652,6 +652,7 @@ static const struct platform_features slv_features = { .bclk_freq = BCLK_SLV, .supported_cstates = CC1 | CC6 | PC6, .cst_limit = CST_LIMIT_SLV, + .has_msr_core_c1_res = 1, .trl_msrs = TRL_ATOM, .rapl_msrs = RAPL_PKG | RAPL_CORE, .has_rapl_divisor = 1, @@ -697,6 +698,7 @@ static const struct platform_features gmtd_features = { .supported_cstates = CC1 | CC6 | PC2 | PC6, .cst_limit = CST_LIMIT_GMT, .has_irtl_msrs = 1, + .has_msr_core_c1_res = 1, .trl_msrs = TRL_BASE | TRL_CORECOUNT, .rapl_msrs = RAPL_PKG_ALL | RAPL_DRAM_ALL | RAPL_CORE_ENERGY_STATUS, }; @@ -2069,7 +2071,7 @@ void delta_core(struct core_data *new, struct core_data *old) int soft_c1_residency_display(int bic) { - if (!DO_BIC(BIC_CPU_c1) || use_c1_residency_msr) + if (!DO_BIC(BIC_CPU_c1) || platform->has_msr_core_c1_res) return 0; return DO_BIC_READ(bic); @@ -2118,7 +2120,7 @@ int delta_thread(struct thread_data *new, struct thread_data *old, struct core_d } } - if (use_c1_residency_msr) { + if (platform->has_msr_core_c1_res) { /* * Some models have a dedicated C1 residency MSR, * which should be more accurate than the derivation below. @@ -2700,7 +2702,7 @@ retry: return -5; t->smi_count = msr & 0xFFFFFFFF; } - if (DO_BIC(BIC_CPU_c1) && use_c1_residency_msr) { + if (DO_BIC(BIC_CPU_c1) && platform->has_msr_core_c1_res) { if (get_msr(cpu, MSR_CORE_C1_RES, &t->c1)) return -6; } @@ -4297,22 +4299,6 @@ int has_slv_msrs(unsigned int family, unsigned int model) return 0; } -int is_dnv(unsigned int family, unsigned int model) -{ - - if (!genuine_intel) - return 0; - - if (family != 6) - return 0; - - switch (model) { - case INTEL_FAM6_ATOM_GOLDMONT_D: - return 1; - } - return 0; -} - int is_icx(unsigned int family, unsigned int model) { @@ -5706,10 +5692,6 @@ void process_cpuid() if (has_slv_msrs(family, model)) { BIC_PRESENT(BIC_Mod_c6); - use_c1_residency_msr = 1; - } - if (is_dnv(family, model)) { - use_c1_residency_msr = 1; } if (has_skl_msrs(family, model)) { BIC_PRESENT(BIC_Totl_c0); -- cgit v1.2.3 From 9cc1c1038526a5b6c9a57397def80ba79c260ff2 Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Sun, 27 Aug 2023 14:47:30 +0800 Subject: tools/power/turbostat: Abstract MSR_MODULE_C6_RES_MS support Abstract MSR_MODULE_C6_RES_MS support. Signed-off-by: Zhang Rui Reviewed-by: Len Brown --- tools/power/x86/turbostat/turbostat.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c index de9260c96678..5f90d96bd9e3 100644 --- a/tools/power/x86/turbostat/turbostat.c +++ b/tools/power/x86/turbostat/turbostat.c @@ -284,6 +284,7 @@ struct platform_features { bool has_cst_auto_convension; /* AUTOMATIC_CSTATE_CONVERSION bit in MSR_PKG_CST_CONFIG_CONTROL */ bool has_irtl_msrs; /* MSR_PKGC3/PKGC6/PKGC7/PKGC8/PKGC9/PKGC10_IRTL */ bool has_msr_core_c1_res; /* MSR_CORE_C1_RES */ + bool has_msr_module_c6_res_ms; /* MSR_MODULE_C6_RES_MS */ int trl_msrs; /* MSR_TURBO_RATIO_LIMIT/LIMIT1/LIMIT2/SECONDARY, Atom TRL MSRs */ int plr_msrs; /* MSR_CORE/GFX/RING_PERF_LIMIT_REASONS */ int rapl_msrs; /* RAPL PKG/DRAM/CORE/GFX MSRs, AMD RAPL MSRs */ @@ -653,6 +654,7 @@ static const struct platform_features slv_features = { .supported_cstates = CC1 | CC6 | PC6, .cst_limit = CST_LIMIT_SLV, .has_msr_core_c1_res = 1, + .has_msr_module_c6_res_ms = 1, .trl_msrs = TRL_ATOM, .rapl_msrs = RAPL_PKG | RAPL_CORE, .has_rapl_divisor = 1, @@ -5690,9 +5692,9 @@ void process_cpuid() BIC_PRESENT(BIC_SMI); probe_bclk(); - if (has_slv_msrs(family, model)) { + if (platform->has_msr_module_c6_res_ms) BIC_PRESENT(BIC_Mod_c6); - } + if (has_skl_msrs(family, model)) { BIC_PRESENT(BIC_Totl_c0); BIC_PRESENT(BIC_Any_c0); -- cgit v1.2.3 From 6c36882e09dbc9a44d64180ba7972838d3f45488 Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Sun, 27 Aug 2023 14:52:24 +0800 Subject: tools/power/turbostat: Abstract MSR_CC6/MC6_DEMOTION_POLICY_CONFIG support Abstract the support for MSR_CC6/MC6_DEMOTION_POLICY_CONFIG. Delete has_slv_msrs() CPU model check. Signed-off-by: Zhang Rui Reviewed-by: Len Brown --- tools/power/x86/turbostat/turbostat.c | 29 ++++++----------------------- 1 file changed, 6 insertions(+), 23 deletions(-) diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c index 5f90d96bd9e3..f8d7ba87f968 100644 --- a/tools/power/x86/turbostat/turbostat.c +++ b/tools/power/x86/turbostat/turbostat.c @@ -285,6 +285,7 @@ struct platform_features { bool has_irtl_msrs; /* MSR_PKGC3/PKGC6/PKGC7/PKGC8/PKGC9/PKGC10_IRTL */ bool has_msr_core_c1_res; /* MSR_CORE_C1_RES */ bool has_msr_module_c6_res_ms; /* MSR_MODULE_C6_RES_MS */ + bool has_msr_c6_demotion_policy_config; /* MSR_CC6_DEMOTION_POLICY_CONFIG/MSR_MC6_DEMOTION_POLICY_CONFIG */ int trl_msrs; /* MSR_TURBO_RATIO_LIMIT/LIMIT1/LIMIT2/SECONDARY, Atom TRL MSRs */ int plr_msrs; /* MSR_CORE/GFX/RING_PERF_LIMIT_REASONS */ int rapl_msrs; /* RAPL PKG/DRAM/CORE/GFX MSRs, AMD RAPL MSRs */ @@ -655,6 +656,7 @@ static const struct platform_features slv_features = { .cst_limit = CST_LIMIT_SLV, .has_msr_core_c1_res = 1, .has_msr_module_c6_res_ms = 1, + .has_msr_c6_demotion_policy_config = 1, .trl_msrs = TRL_ATOM, .rapl_msrs = RAPL_PKG | RAPL_CORE, .has_rapl_divisor = 1, @@ -4279,28 +4281,6 @@ void probe_bclk(void) tsc_tweak = base_hz / tsc_hz; } -/* - * SLV client has support for unique MSRs: - * - * MSR_CC6_DEMOTION_POLICY_CONFIG - * MSR_MC6_DEMOTION_POLICY_CONFIG - */ - -int has_slv_msrs(unsigned int family, unsigned int model) -{ - if (!genuine_intel) - return 0; - - if (family != 6) - return 0; - - switch (model) { - case INTEL_FAM6_ATOM_SILVERMONT: - return 1; - } - return 0; -} - int is_icx(unsigned int family, unsigned int model) { @@ -5358,6 +5338,9 @@ void decode_c6_demotion_policy_msr(void) { unsigned long long msr; + if (!platform->has_msr_c6_demotion_policy_config) + return; + if (!get_msr(base_cpu, MSR_CC6_DEMOTION_POLICY_CONFIG, &msr)) fprintf(outf, "cpu%d: MSR_CC6_DEMOTION_POLICY_CONFIG: 0x%08llx (%sable-CC6-Demotion)\n", base_cpu, msr, msr & (1 << 0) ? "EN" : "DIS"); @@ -5707,7 +5690,7 @@ void process_cpuid() if (!quiet) decode_misc_pwr_mgmt_msr(); - if (!quiet && has_slv_msrs(family, model)) + if (!quiet) decode_c6_demotion_policy_msr(); rapl_probe(); -- cgit v1.2.3 From c8202a6c3acf7bbde42b5e389eec40fd8e1b8358 Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Sun, 27 Aug 2023 15:26:14 +0800 Subject: tools/power/turbostat: Abstract MSR_ATOM_PKG_C6_RESIDENCY support Abstract the support for MSR_ATOM_PKG_C6_RESIDENCY. Delete is_slm() CPU model check. Signed-off-by: Zhang Rui Reviewed-by: Len Brown --- tools/power/x86/turbostat/turbostat.c | 23 ++++------------------- 1 file changed, 4 insertions(+), 19 deletions(-) diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c index f8d7ba87f968..a04861846d33 100644 --- a/tools/power/x86/turbostat/turbostat.c +++ b/tools/power/x86/turbostat/turbostat.c @@ -222,7 +222,6 @@ unsigned int summary_only; unsigned int list_header_only; unsigned int dump_only; unsigned int do_knl_cstates; -unsigned int do_slm_cstates; unsigned int has_aperf; unsigned int has_epb; unsigned int has_turbo; @@ -286,6 +285,7 @@ struct platform_features { bool has_msr_core_c1_res; /* MSR_CORE_C1_RES */ bool has_msr_module_c6_res_ms; /* MSR_MODULE_C6_RES_MS */ bool has_msr_c6_demotion_policy_config; /* MSR_CC6_DEMOTION_POLICY_CONFIG/MSR_MC6_DEMOTION_POLICY_CONFIG */ + bool has_msr_atom_pkg_c6_residency; /* MSR_ATOM_PKG_C6_RESIDENCY */ int trl_msrs; /* MSR_TURBO_RATIO_LIMIT/LIMIT1/LIMIT2/SECONDARY, Atom TRL MSRs */ int plr_msrs; /* MSR_CORE/GFX/RING_PERF_LIMIT_REASONS */ int rapl_msrs; /* RAPL PKG/DRAM/CORE/GFX MSRs, AMD RAPL MSRs */ @@ -657,6 +657,7 @@ static const struct platform_features slv_features = { .has_msr_core_c1_res = 1, .has_msr_module_c6_res_ms = 1, .has_msr_c6_demotion_policy_config = 1, + .has_msr_atom_pkg_c6_residency = 1, .trl_msrs = TRL_ATOM, .rapl_msrs = RAPL_PKG | RAPL_CORE, .has_rapl_divisor = 1, @@ -669,6 +670,7 @@ static const struct platform_features slvd_features = { .bclk_freq = BCLK_SLV, .supported_cstates = CC1 | CC6 | PC3 | PC6, .cst_limit = CST_LIMIT_SLV, + .has_msr_atom_pkg_c6_residency = 1, .trl_msrs = TRL_BASE, .rapl_msrs = RAPL_PKG | RAPL_CORE, .rapl_quirk_tdp = 30, @@ -2795,7 +2797,7 @@ retry: if (get_msr(cpu, MSR_PKG_C3_RESIDENCY, &p->pc3)) return -9; if (DO_BIC(BIC_Pkgpc6)) { - if (do_slm_cstates) { + if (platform->has_msr_atom_pkg_c6_residency) { if (get_msr(cpu, MSR_ATOM_PKG_C6_RESIDENCY, &p->pc6)) return -10; } else { @@ -5125,22 +5127,6 @@ int has_skl_msrs(unsigned int family, unsigned int model) return 0; } -int is_slm(unsigned int family, unsigned int model) -{ - if (!genuine_intel) - return 0; - - if (family != 6) - return 0; - - switch (model) { - case INTEL_FAM6_ATOM_SILVERMONT: /* BYT */ - case INTEL_FAM6_ATOM_SILVERMONT_D: /* AVN */ - return 1; - } - return 0; -} - int is_knl(unsigned int family, unsigned int model) { if (!genuine_intel) @@ -5684,7 +5670,6 @@ void process_cpuid() BIC_PRESENT(BIC_GFX_c0); BIC_PRESENT(BIC_CPUGFX); } - do_slm_cstates = is_slm(family, model); do_knl_cstates = is_knl(family, model); if (!quiet) -- cgit v1.2.3 From 80d132cb45f2cc171395bfaacd74567a183ab160 Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Sun, 27 Aug 2023 15:00:58 +0800 Subject: tools/power/turbostat: Abstract MSR_KNL_CORE_C6_RESIDENCY support Abstract the support for MSR_KNL_CORE_C6_RESIDENCY. Signed-off-by: Zhang Rui Reviewed-by: Len Brown --- tools/power/x86/turbostat/turbostat.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c index a04861846d33..f0a99e092fa7 100644 --- a/tools/power/x86/turbostat/turbostat.c +++ b/tools/power/x86/turbostat/turbostat.c @@ -221,7 +221,6 @@ unsigned int rapl_joules; unsigned int summary_only; unsigned int list_header_only; unsigned int dump_only; -unsigned int do_knl_cstates; unsigned int has_aperf; unsigned int has_epb; unsigned int has_turbo; @@ -286,6 +285,7 @@ struct platform_features { bool has_msr_module_c6_res_ms; /* MSR_MODULE_C6_RES_MS */ bool has_msr_c6_demotion_policy_config; /* MSR_CC6_DEMOTION_POLICY_CONFIG/MSR_MC6_DEMOTION_POLICY_CONFIG */ bool has_msr_atom_pkg_c6_residency; /* MSR_ATOM_PKG_C6_RESIDENCY */ + bool has_msr_knl_core_c6_residency; /* MSR_KNL_CORE_C6_RESIDENCY */ int trl_msrs; /* MSR_TURBO_RATIO_LIMIT/LIMIT1/LIMIT2/SECONDARY, Atom TRL MSRs */ int plr_msrs; /* MSR_CORE/GFX/RING_PERF_LIMIT_REASONS */ int rapl_msrs; /* RAPL PKG/DRAM/CORE/GFX MSRs, AMD RAPL MSRs */ @@ -751,6 +751,7 @@ static const struct platform_features knl_features = { .bclk_freq = BCLK_100MHZ, .supported_cstates = CC1 | CC6 | PC3 | PC6, .cst_limit = CST_LIMIT_KNL, + .has_msr_knl_core_c6_residency = 1, .trl_msrs = TRL_KNL, .rapl_msrs = RAPL_PKG_ALL | RAPL_DRAM_ALL, .has_fixed_rapl_unit = 1, @@ -2727,10 +2728,10 @@ retry: return -6; } - if ((DO_BIC(BIC_CPU_c6) || soft_c1_residency_display(BIC_CPU_c6)) && !do_knl_cstates) { + if ((DO_BIC(BIC_CPU_c6) || soft_c1_residency_display(BIC_CPU_c6)) && !platform->has_msr_knl_core_c6_residency) { if (get_msr(cpu, MSR_CORE_C6_RESIDENCY, &c->c6)) return -7; - } else if (do_knl_cstates && soft_c1_residency_display(BIC_CPU_c6)) { + } else if (platform->has_msr_knl_core_c6_residency && soft_c1_residency_display(BIC_CPU_c6)) { if (get_msr(cpu, MSR_KNL_CORE_C6_RESIDENCY, &c->c6)) return -7; } @@ -5670,7 +5671,6 @@ void process_cpuid() BIC_PRESENT(BIC_GFX_c0); BIC_PRESENT(BIC_CPUGFX); } - do_knl_cstates = is_knl(family, model); if (!quiet) decode_misc_pwr_mgmt_msr(); -- cgit v1.2.3 From 58ddb691d8d8a281535406766da4e23e0f011126 Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Sun, 27 Aug 2023 15:07:43 +0800 Subject: tools/power/turbostat: Abstract extended cstate MSRs support Abstract the support for MSR_PKG_WEIGHTED_CORE_C0_RES, MSR_PKG_ANY_CORE_C0_RES, MSR_PKG_ANY_GFXE_C0_RES and MSR_PKG_BOTH_CORE_GFXE_C0_RES. Delete has_skl_msrs() CPU model check. Signed-off-by: Zhang Rui Reviewed-by: Len Brown --- tools/power/x86/turbostat/turbostat.c | 29 ++++------------------------- 1 file changed, 4 insertions(+), 25 deletions(-) diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c index f0a99e092fa7..613b284f2f09 100644 --- a/tools/power/x86/turbostat/turbostat.c +++ b/tools/power/x86/turbostat/turbostat.c @@ -286,6 +286,7 @@ struct platform_features { bool has_msr_c6_demotion_policy_config; /* MSR_CC6_DEMOTION_POLICY_CONFIG/MSR_MC6_DEMOTION_POLICY_CONFIG */ bool has_msr_atom_pkg_c6_residency; /* MSR_ATOM_PKG_C6_RESIDENCY */ bool has_msr_knl_core_c6_residency; /* MSR_KNL_CORE_C6_RESIDENCY */ + bool has_ext_cst_msrs; /* MSR_PKG_WEIGHTED_CORE_C0_RES/MSR_PKG_ANY_CORE_C0_RES/MSR_PKG_ANY_GFXE_C0_RES/MSR_PKG_BOTH_CORE_GFXE_C0_RES */ int trl_msrs; /* MSR_TURBO_RATIO_LIMIT/LIMIT1/LIMIT2/SECONDARY, Atom TRL MSRs */ int plr_msrs; /* MSR_CORE/GFX/RING_PERF_LIMIT_REASONS */ int rapl_msrs; /* RAPL PKG/DRAM/CORE/GFX MSRs, AMD RAPL MSRs */ @@ -586,6 +587,7 @@ static const struct platform_features skl_features = { .supported_cstates = CC1 | CC3 | CC6 | CC7 | PC2 | PC3 | PC6 | PC7 | PC8 | PC9 | PC10, .cst_limit = CST_LIMIT_HSW, .has_irtl_msrs = 1, + .has_ext_cst_msrs = 1, .trl_msrs = TRL_BASE, .tcc_offset_bits = 6, .rapl_msrs = RAPL_PKG_ALL | RAPL_CORE_ALL | RAPL_DRAM | RAPL_DRAM_PERF_STATUS | RAPL_GFX, @@ -601,6 +603,7 @@ static const struct platform_features cnl_features = { .supported_cstates = CC1 | CC6 | CC7 | PC2 | PC3 | PC6 | PC7 | PC8 | PC9 | PC10, .cst_limit = CST_LIMIT_HSW, .has_irtl_msrs = 1, + .has_ext_cst_msrs = 1, .trl_msrs = TRL_BASE, .tcc_offset_bits = 6, .rapl_msrs = RAPL_PKG_ALL | RAPL_CORE_ALL | RAPL_DRAM | RAPL_DRAM_PERF_STATUS | RAPL_GFX, @@ -5104,30 +5107,6 @@ int print_rapl(struct thread_data *t, struct core_data *c, struct pkg_data *p) return 0; } -/* - * SKL adds support for additional MSRS: - * - * MSR_PKG_WEIGHTED_CORE_C0_RES 0x00000658 - * MSR_PKG_ANY_CORE_C0_RES 0x00000659 - * MSR_PKG_ANY_GFXE_C0_RES 0x0000065A - * MSR_PKG_BOTH_CORE_GFXE_C0_RES 0x0000065B - */ -int has_skl_msrs(unsigned int family, unsigned int model) -{ - if (!genuine_intel) - return 0; - - if (family != 6) - return 0; - - switch (model) { - case INTEL_FAM6_SKYLAKE_L: /* SKL */ - case INTEL_FAM6_CANNONLAKE_L: /* CNL */ - return 1; - } - return 0; -} - int is_knl(unsigned int family, unsigned int model) { if (!genuine_intel) @@ -5665,7 +5644,7 @@ void process_cpuid() if (platform->has_msr_module_c6_res_ms) BIC_PRESENT(BIC_Mod_c6); - if (has_skl_msrs(family, model)) { + if (platform->has_ext_cst_msrs) { BIC_PRESENT(BIC_Totl_c0); BIC_PRESENT(BIC_Any_c0); BIC_PRESENT(BIC_GFX_c0); -- cgit v1.2.3 From ed43247b15a4fb4df01c3408fcab6e206f93ab87 Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Thu, 31 Aug 2023 15:49:10 +0800 Subject: tools/power/turbostat: Abstract aperf/mperf multiplier support Abstract aperf/mperf multiplier support. Delete is_knl() CPU model check. Signed-off-by: Zhang Rui Reviewed-by: Len Brown --- tools/power/x86/turbostat/turbostat.c | 26 +++----------------------- 1 file changed, 3 insertions(+), 23 deletions(-) diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c index 613b284f2f09..65a507d82fc4 100644 --- a/tools/power/x86/turbostat/turbostat.c +++ b/tools/power/x86/turbostat/turbostat.c @@ -296,6 +296,7 @@ struct platform_features { int rapl_quirk_tdp; /* Hardcoded TDP value when cannot be retrieved from hardware */ int tcc_offset_bits; /* TCC Offset bits in MSR_IA32_TEMPERATURE_TARGET */ bool enable_tsc_tweak; /* Use CPU Base freq instead of TSC freq for aperf/mperf counter */ + bool need_perf_multiplier; /* mperf/aperf multiplier */ }; struct platform_data { @@ -758,6 +759,7 @@ static const struct platform_features knl_features = { .trl_msrs = TRL_KNL, .rapl_msrs = RAPL_PKG_ALL | RAPL_DRAM_ALL, .has_fixed_rapl_unit = 1, + .need_perf_multiplier = 1, }; static const struct platform_features default_features = { @@ -5107,28 +5109,6 @@ int print_rapl(struct thread_data *t, struct core_data *c, struct pkg_data *p) return 0; } -int is_knl(unsigned int family, unsigned int model) -{ - if (!genuine_intel) - return 0; - - if (family != 6) - return 0; - - switch (model) { - case INTEL_FAM6_XEON_PHI_KNL: /* KNL */ - return 1; - } - return 0; -} - -unsigned int get_aperf_mperf_multiplier(unsigned int family, unsigned int model) -{ - if (is_knl(family, model)) - return 1024; - return 1; -} - int get_cpu_type(struct thread_data *t, struct core_data *c, struct pkg_data *p) { unsigned int eax, ebx, ecx, edx; @@ -5630,7 +5610,7 @@ void process_cpuid() } if (has_aperf) - aperf_mperf_multiplier = get_aperf_mperf_multiplier(family, model); + aperf_mperf_multiplier = platform->need_perf_multiplier ? 1024 : 1; BIC_PRESENT(BIC_IRQ); BIC_PRESENT(BIC_TSC_MHz); -- cgit v1.2.3 From 7d0ebe6f7eaf8c0ac069ddab1fe3793401139fb3 Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Thu, 31 Aug 2023 15:57:44 +0800 Subject: tools/power/turbostat: Abstract cstate prewake bit support Abstract cstate prewake bit support. Delete is_icx()/is_spr() CPU model checks. Signed-off-by: Zhang Rui Reviewed-by: Len Brown --- tools/power/x86/turbostat/turbostat.c | 47 +++-------------------------------- 1 file changed, 4 insertions(+), 43 deletions(-) diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c index 65a507d82fc4..580cc2a3b947 100644 --- a/tools/power/x86/turbostat/turbostat.c +++ b/tools/power/x86/turbostat/turbostat.c @@ -252,7 +252,6 @@ unsigned int tj_max_override; double rapl_power_units, rapl_time_units; double rapl_dram_energy_units, rapl_energy_units; double rapl_joule_counter_range; -unsigned int dis_cstate_prewake; unsigned int crystal_hz; unsigned long long tsc_hz; int base_cpu; @@ -287,6 +286,7 @@ struct platform_features { bool has_msr_atom_pkg_c6_residency; /* MSR_ATOM_PKG_C6_RESIDENCY */ bool has_msr_knl_core_c6_residency; /* MSR_KNL_CORE_C6_RESIDENCY */ bool has_ext_cst_msrs; /* MSR_PKG_WEIGHTED_CORE_C0_RES/MSR_PKG_ANY_CORE_C0_RES/MSR_PKG_ANY_GFXE_C0_RES/MSR_PKG_BOTH_CORE_GFXE_C0_RES */ + bool has_cst_prewake_bit; /* Cstate prewake bit in MSR_IA32_POWER_CTL */ int trl_msrs; /* MSR_TURBO_RATIO_LIMIT/LIMIT1/LIMIT2/SECONDARY, Atom TRL MSRs */ int plr_msrs; /* MSR_CORE/GFX/RING_PERF_LIMIT_REASONS */ int rapl_msrs; /* RAPL PKG/DRAM/CORE/GFX MSRs, AMD RAPL MSRs */ @@ -635,6 +635,7 @@ static const struct platform_features icx_features = { .supported_cstates = CC1 | CC6 | PC2 | PC6, .cst_limit = CST_LIMIT_ICX, .has_irtl_msrs = 1, + .has_cst_prewake_bit = 1, .trl_msrs = TRL_BASE | TRL_CORECOUNT, .rapl_msrs = RAPL_PKG_ALL | RAPL_DRAM_ALL, .has_fixed_rapl_unit = 1, @@ -649,6 +650,7 @@ static const struct platform_features spr_features = { .supported_cstates = CC1 | CC6 | PC2 | PC6, .cst_limit = CST_LIMIT_SKX, .has_irtl_msrs = 1, + .has_cst_prewake_bit = 1, .trl_msrs = TRL_BASE | TRL_CORECOUNT, .rapl_msrs = RAPL_PKG_ALL | RAPL_DRAM_ALL, }; @@ -3014,8 +3016,6 @@ void probe_cst_limit(void) pkg_cstate_limit = pkg_cstate_limits[msr & 0xF]; } -void prewake_cstate_probe(unsigned int family, unsigned int model); - static void dump_platform_info(void) { unsigned long long msr; @@ -3036,7 +3036,7 @@ static void dump_platform_info(void) base_cpu, msr, msr & 0x2 ? "EN" : "DIS"); /* C-state Pre-wake Disable (CSTATE_PREWAKE_DISABLE) */ - if (dis_cstate_prewake) + if (platform->has_cst_prewake_bit) fprintf(outf, "C-state Pre-wake: %sabled\n", msr & 0x40000000 ? "DIS" : "EN"); return; @@ -4289,38 +4289,6 @@ void probe_bclk(void) tsc_tweak = base_hz / tsc_hz; } -int is_icx(unsigned int family, unsigned int model) -{ - - if (!genuine_intel) - return 0; - - if (family != 6) - return 0; - - switch (model) { - case INTEL_FAM6_ICELAKE_X: - return 1; - } - return 0; -} - -int is_spr(unsigned int family, unsigned int model) -{ - - if (!genuine_intel) - return 0; - - if (family != 6) - return 0; - - switch (model) { - case INTEL_FAM6_SAPPHIRERAPIDS_X: - return 1; - } - return 0; -} - static void remove_underbar(char *s) { char *to = s; @@ -4910,12 +4878,6 @@ void rapl_probe(void) rapl_probe_amd(); } -void prewake_cstate_probe(unsigned int family, unsigned int model) -{ - if (is_icx(family, model) || is_spr(family, model)) - dis_cstate_prewake = 1; -} - int print_thermal(struct thread_data *t, struct core_data *c, struct pkg_data *p) { unsigned long long msr; @@ -5638,7 +5600,6 @@ void process_cpuid() decode_c6_demotion_policy_msr(); rapl_probe(); - prewake_cstate_probe(family, model); if (!quiet) dump_cstate_pstate_config_info(); -- cgit v1.2.3 From d085b3b0f11af7d23601b832e0d9e446d18df968 Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Sun, 27 Aug 2023 21:53:21 +0800 Subject: tools/power/turbostat: Delete intel_model_duplicates() Now CPU model checks have been cleaned up, no code depends on the duplicated CPU model value. Delete intel_model_duplicates(). Signed-off-by: Zhang Rui Reviewed-by: Len Brown --- tools/power/x86/turbostat/turbostat.c | 59 ----------------------------------- 1 file changed, 59 deletions(-) diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c index 580cc2a3b947..89f53e1ac63a 100644 --- a/tools/power/x86/turbostat/turbostat.c +++ b/tools/power/x86/turbostat/turbostat.c @@ -5258,63 +5258,6 @@ void decode_c6_demotion_policy_msr(void) base_cpu, msr, msr & (1 << 0) ? "EN" : "DIS"); } -/* - * When models are the same, for the purpose of turbostat, reuse - */ -unsigned int intel_model_duplicates(unsigned int model) -{ - - switch (model) { - case INTEL_FAM6_NEHALEM_EP: /* Core i7, Xeon 5500 series - Bloomfield, Gainstown NHM-EP */ - case INTEL_FAM6_NEHALEM_G: /* Core i7 and i5 Processor - Nehalem */ - case INTEL_FAM6_WESTMERE: /* Westmere Client - Clarkdale, Arrandale */ - case INTEL_FAM6_WESTMERE_EP: /* Westmere EP - Gulftown */ - return INTEL_FAM6_NEHALEM; - - case INTEL_FAM6_WESTMERE_EX: /* Westmere-EX Xeon - Eagleton */ - return INTEL_FAM6_NEHALEM_EX; - - case INTEL_FAM6_XEON_PHI_KNM: - return INTEL_FAM6_XEON_PHI_KNL; - - case INTEL_FAM6_BROADWELL_D: /* BDX-DE */ - return INTEL_FAM6_BROADWELL_X; - - case INTEL_FAM6_SKYLAKE: - case INTEL_FAM6_KABYLAKE_L: - case INTEL_FAM6_KABYLAKE: - case INTEL_FAM6_COMETLAKE_L: - case INTEL_FAM6_COMETLAKE: - return INTEL_FAM6_SKYLAKE_L; - - case INTEL_FAM6_ICELAKE_L: - case INTEL_FAM6_ICELAKE_NNPI: - case INTEL_FAM6_TIGERLAKE_L: - case INTEL_FAM6_TIGERLAKE: - case INTEL_FAM6_ROCKETLAKE: - case INTEL_FAM6_LAKEFIELD: - case INTEL_FAM6_ALDERLAKE: - case INTEL_FAM6_ALDERLAKE_L: - case INTEL_FAM6_ATOM_GRACEMONT: - case INTEL_FAM6_RAPTORLAKE: - case INTEL_FAM6_RAPTORLAKE_P: - case INTEL_FAM6_RAPTORLAKE_S: - case INTEL_FAM6_METEORLAKE: - case INTEL_FAM6_METEORLAKE_L: - return INTEL_FAM6_CANNONLAKE_L; - - case INTEL_FAM6_ATOM_TREMONT_L: - return INTEL_FAM6_ATOM_TREMONT; - - case INTEL_FAM6_ICELAKE_D: - return INTEL_FAM6_ICELAKE_X; - - case INTEL_FAM6_EMERALDRAPIDS_X: - return INTEL_FAM6_SAPPHIRERAPIDS_X; - } - return model; -} - void print_dev_latency(void) { char *path = "/dev/cpu_dma_latency"; @@ -5457,8 +5400,6 @@ void process_cpuid() } probe_platform_features(family, model); - if (genuine_intel) - model = intel_model_duplicates(model); if (!(edx_flags & (1 << 5))) errx(1, "CPUID: no MSR"); -- cgit v1.2.3 From 32e8c6169af7ef7c938b1bd996d27ab171e27d80 Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Thu, 31 Aug 2023 14:44:06 +0800 Subject: tools/power/turbostat: Improve probe_platform_features() logic AMD/Hygon platforms that don't have RAPL use 'amd_features' to describe the platform features. Unknown Intel platforms use 'default_features' to describe the platform features. As none of the platform feature is set for 'amd_features' or 'default_features', there is no need to maintain both of them. Remove 'amd_features' structure and improve the logic in probe_platform_features(). Signed-off-by: Zhang Rui Reviewed-by: Len Brown --- tools/power/x86/turbostat/turbostat.c | 9 ++------- 1 file changed, 2 insertions(+), 7 deletions(-) diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c index 89f53e1ac63a..102ba515cf4b 100644 --- a/tools/power/x86/turbostat/turbostat.c +++ b/tools/power/x86/turbostat/turbostat.c @@ -767,9 +767,6 @@ static const struct platform_features knl_features = { static const struct platform_features default_features = { }; -static const struct platform_features amd_features = { -}; - static const struct platform_features amd_features_with_rapl = { .rapl_msrs = RAPL_AMD_F17H, .has_per_core_rapl = 1, @@ -849,9 +846,9 @@ void probe_platform_features(unsigned int family, unsigned int model) { int i; - if (authentic_amd || hygon_genuine) { - platform = &amd_features; + platform = &default_features; + if (authentic_amd || hygon_genuine) { if (max_extended_level >= 0x80000007) { unsigned int eax, ebx, ecx, edx; @@ -863,8 +860,6 @@ void probe_platform_features(unsigned int family, unsigned int model) return; } - platform = &default_features; - if (!genuine_intel || family != 6) return; -- cgit v1.2.3 From 045acf6064c5567011163e97c28906e0a7791414 Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Tue, 29 Aug 2023 13:47:58 +0800 Subject: tools/power/turbostat: Relocate cstate probing code Move all cstate probing related code into probe_cstates(). Note that dump_platform_info() actually dumps both MSR_PLATFORM_INFO and MSR_IA32_POWER_CTL. MSR_PLATFORM_INFO is for pstate and MSR_IA32_POWER_CTL is for cstate. So split dump_platform_info() and dump MSR_IA32_POWER_CTL in probe_cstates(). Signed-off-by: Zhang Rui Reviewed-by: Len Brown --- tools/power/x86/turbostat/turbostat.c | 50 ++++++++++++++++++++++------------- 1 file changed, 31 insertions(+), 19 deletions(-) diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c index 102ba515cf4b..e5ca1586961e 100644 --- a/tools/power/x86/turbostat/turbostat.c +++ b/tools/power/x86/turbostat/turbostat.c @@ -272,7 +272,7 @@ int get_msr(int cpu, off_t offset, unsigned long long *msr); struct platform_features { bool has_msr_misc_feature_control; /* MSR_MISC_FEATURE_CONTROL */ bool has_msr_misc_pwr_mgmt; /* MSR_MISC_PWR_MGMT */ - bool has_nhm_msrs; /* MSR_PLATFORM_INFO, MSR_IA32_TEMPERATURE_TARGET, MSR_SMI_COUNT, MSR_PKG_CST_CONFIG_CONTROL, TRL MSRs */ + bool has_nhm_msrs; /* MSR_PLATFORM_INFO, MSR_IA32_TEMPERATURE_TARGET, MSR_SMI_COUNT, MSR_PKG_CST_CONFIG_CONTROL, MSR_IA32_POWER_CTL, TRL MSRs */ bool has_config_tdp; /* MSR_CONFIG_TDP_NOMINAL/LEVEL_1/LEVEL_2/CONTROL, MSR_TURBO_ACTIVATION_RATIO */ int bclk_freq; /* CPU base clock */ int crystal_freq; /* Crystal clock to use when not available from CPUID.15 */ @@ -3025,6 +3025,14 @@ static void dump_platform_info(void) ratio = (msr >> 8) & 0xFF; fprintf(outf, "%d * %.1f = %.1f MHz base frequency\n", ratio, bclk, ratio * bclk); +} + +static void dump_power_ctl(void) +{ + unsigned long long msr; + + if (!platform->has_nhm_msrs) + return; get_msr(base_cpu, MSR_IA32_POWER_CTL, &msr); fprintf(outf, "cpu%d: MSR_IA32_POWER_CTL: 0x%08llx (C1E auto-promotion: %sabled)\n", @@ -3229,6 +3237,9 @@ static void dump_cst_cfg(void) { unsigned long long msr; + if (!platform->has_nhm_msrs) + return; + get_msr(base_cpu, MSR_PKG_CST_CONFIG_CONTROL, &msr); fprintf(outf, "cpu%d: MSR_PKG_CST_CONFIG_CONTROL: 0x%08llx", base_cpu, msr); @@ -4332,7 +4343,6 @@ static void dump_cstate_pstate_config_info(void) dump_platform_info(); dump_turbo_ratio_info(); - dump_cst_cfg(); } static int read_sysfs_int(char *path) @@ -5332,6 +5342,25 @@ void probe_cstates(void) if (platform->supported_cstates & PC10 && (pkg_cstate_limit >= PCL_10)) BIC_PRESENT(BIC_Pkgpc10); + + if (platform->has_msr_module_c6_res_ms) + BIC_PRESENT(BIC_Mod_c6); + + if (platform->has_ext_cst_msrs) { + BIC_PRESENT(BIC_Totl_c0); + BIC_PRESENT(BIC_Any_c0); + BIC_PRESENT(BIC_GFX_c0); + BIC_PRESENT(BIC_CPUGFX); + } + + if (quiet) + return; + + dump_power_ctl(); + dump_cst_cfg(); + decode_c6_demotion_policy_msr(); + print_dev_latency(); + dump_sysfs_cstate_config(); } void process_cpuid() @@ -5519,32 +5548,15 @@ void process_cpuid() BIC_PRESENT(BIC_SMI); probe_bclk(); - if (platform->has_msr_module_c6_res_ms) - BIC_PRESENT(BIC_Mod_c6); - - if (platform->has_ext_cst_msrs) { - BIC_PRESENT(BIC_Totl_c0); - BIC_PRESENT(BIC_Any_c0); - BIC_PRESENT(BIC_GFX_c0); - BIC_PRESENT(BIC_CPUGFX); - } - if (!quiet) decode_misc_pwr_mgmt_msr(); - if (!quiet) - decode_c6_demotion_policy_msr(); - rapl_probe(); if (!quiet) dump_cstate_pstate_config_info(); intel_uncore_frequency_probe(); - if (!quiet) - print_dev_latency(); - if (!quiet) - dump_sysfs_cstate_config(); if (!quiet) dump_sysfs_pstate_config(); -- cgit v1.2.3 From 11cd9a09f3e827605cf8fc7c343ddb8c9f4ee95d Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Thu, 31 Aug 2023 15:58:10 +0800 Subject: tools/power/turbostat: Relocate pstate probing code Introduce probe_pstates() and move all pstate probing related code into it. Signed-off-by: Zhang Rui Reviewed-by: Len Brown --- tools/power/x86/turbostat/turbostat.c | 39 +++++++++++++++++++---------------- 1 file changed, 21 insertions(+), 18 deletions(-) diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c index e5ca1586961e..1bcaee6d0ead 100644 --- a/tools/power/x86/turbostat/turbostat.c +++ b/tools/power/x86/turbostat/turbostat.c @@ -3016,6 +3016,9 @@ static void dump_platform_info(void) unsigned long long msr; unsigned int ratio; + if (!platform->has_nhm_msrs) + return; + get_msr(base_cpu, MSR_PLATFORM_INFO, &msr); fprintf(outf, "cpu%d: MSR_PLATFORM_INFO: 0x%08llx\n", base_cpu, msr); @@ -4313,6 +4316,9 @@ static void dump_turbo_ratio_info(void) if (!has_turbo) return; + if (!platform->has_nhm_msrs) + return; + if (platform->trl_msrs & TRL_LIMIT2) dump_turbo_ratio_limit2(); @@ -4336,15 +4342,6 @@ static void dump_turbo_ratio_info(void) dump_config_tdp(); } -static void dump_cstate_pstate_config_info(void) -{ - if (!platform->has_nhm_msrs) - return; - - dump_platform_info(); - dump_turbo_ratio_info(); -} - static int read_sysfs_int(char *path) { FILE *input; @@ -5363,6 +5360,19 @@ void probe_cstates(void) dump_sysfs_cstate_config(); } +void probe_pstates(void) +{ + probe_bclk(); + + if (quiet) + return; + + dump_platform_info(); + dump_turbo_ratio_info(); + dump_sysfs_pstate_config(); + decode_misc_pwr_mgmt_msr(); +} + void process_cpuid() { unsigned int eax, ebx, ecx, edx; @@ -5542,24 +5552,17 @@ void process_cpuid() BIC_PRESENT(BIC_IRQ); BIC_PRESENT(BIC_TSC_MHz); + probe_pstates(); + probe_cstates(); if (platform->has_nhm_msrs) BIC_PRESENT(BIC_SMI); - probe_bclk(); - - if (!quiet) - decode_misc_pwr_mgmt_msr(); rapl_probe(); - if (!quiet) - dump_cstate_pstate_config_info(); intel_uncore_frequency_probe(); - if (!quiet) - dump_sysfs_pstate_config(); - if (!access("/sys/class/drm/card0/power/rc6_residency_ms", R_OK)) BIC_PRESENT(BIC_GFX_rc6); -- cgit v1.2.3 From 622c8f23556266a5afdd657aa0518b7d70d5dfc7 Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Thu, 31 Aug 2023 16:00:15 +0800 Subject: tools/power/turbostat: Rename uncore probing function Rename intel_uncore_frequency_probe() to probe_intel_uncore_frequency() to be consistent with other probing function names. Probe uncore frequency right after probing cstates. Signed-off-by: Zhang Rui Reviewed-by: Len Brown --- tools/power/x86/turbostat/turbostat.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c index 1bcaee6d0ead..a956a30d81de 100644 --- a/tools/power/x86/turbostat/turbostat.c +++ b/tools/power/x86/turbostat/turbostat.c @@ -4378,7 +4378,7 @@ static void dump_sysfs_file(char *path) fprintf(outf, "%s: %s", strrchr(path, '/') + 1, cpuidle_buf); } -static void intel_uncore_frequency_probe(void) +static void probe_intel_uncore_frequency(void) { int i, j; char path[128]; @@ -5556,13 +5556,13 @@ void process_cpuid() probe_cstates(); + probe_intel_uncore_frequency(); + if (platform->has_nhm_msrs) BIC_PRESENT(BIC_SMI); rapl_probe(); - intel_uncore_frequency_probe(); - if (!access("/sys/class/drm/card0/power/rc6_residency_ms", R_OK)) BIC_PRESENT(BIC_GFX_rc6); -- cgit v1.2.3 From 6cb13609a07ba466b4613fdce7da8c98508069b7 Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Thu, 31 Aug 2023 16:00:33 +0800 Subject: tools/power/turbostat: Rename rapl probing function Rename rapl_probe() to probe_rapl() to be consistent with other probing function names. Probe rapl after probing uncore frequency. Signed-off-by: Zhang Rui Reviewed-by: Len Brown --- tools/power/x86/turbostat/turbostat.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c index a956a30d81de..bf2b1d1b2627 100644 --- a/tools/power/x86/turbostat/turbostat.c +++ b/tools/power/x86/turbostat/turbostat.c @@ -4865,11 +4865,11 @@ void rapl_probe_amd(void) } /* - * rapl_probe() + * probe_rapl() * * sets rapl_power_units, rapl_energy_units, rapl_time_units */ -void rapl_probe(void) +void probe_rapl(void) { if (!platform->rapl_msrs) return; @@ -5558,11 +5558,11 @@ void process_cpuid() probe_intel_uncore_frequency(); + probe_rapl(); + if (platform->has_nhm_msrs) BIC_PRESENT(BIC_SMI); - rapl_probe(); - if (!access("/sys/class/drm/card0/power/rc6_residency_ms", R_OK)) BIC_PRESENT(BIC_GFX_rc6); -- cgit v1.2.3 From 2538d1673d02f66f6bdf01eebf36e271228778e9 Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Thu, 31 Aug 2023 16:01:12 +0800 Subject: tools/power/turbostat: Relocate graphics probing code Introduce probe_graphics(), and move all graphics probing related code into it. Signed-off-by: Zhang Rui Reviewed-by: Len Brown --- tools/power/x86/turbostat/turbostat.c | 27 ++++++++++++++++----------- 1 file changed, 16 insertions(+), 11 deletions(-) diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c index bf2b1d1b2627..feff9ecff368 100644 --- a/tools/power/x86/turbostat/turbostat.c +++ b/tools/power/x86/turbostat/turbostat.c @@ -4424,6 +4424,20 @@ static void probe_intel_uncore_frequency(void) } } +static void probe_graphics(void) +{ + if (!access("/sys/class/drm/card0/power/rc6_residency_ms", R_OK)) + BIC_PRESENT(BIC_GFX_rc6); + + if (!access("/sys/class/drm/card0/gt_cur_freq_mhz", R_OK) || + !access("/sys/class/graphics/fb0/device/drm/card0/gt_cur_freq_mhz", R_OK)) + BIC_PRESENT(BIC_GFXMHz); + + if (!access("/sys/class/drm/card0/gt_act_freq_mhz", R_OK) || + !access("/sys/class/graphics/fb0/device/drm/card0/gt_act_freq_mhz", R_OK)) + BIC_PRESENT(BIC_GFXACTMHz); +} + static void dump_sysfs_cstate_config(void) { char path[64]; @@ -5558,22 +5572,13 @@ void process_cpuid() probe_intel_uncore_frequency(); + probe_graphics(); + probe_rapl(); if (platform->has_nhm_msrs) BIC_PRESENT(BIC_SMI); - if (!access("/sys/class/drm/card0/power/rc6_residency_ms", R_OK)) - BIC_PRESENT(BIC_GFX_rc6); - - if (!access("/sys/class/drm/card0/gt_cur_freq_mhz", R_OK) || - !access("/sys/class/graphics/fb0/device/drm/card0/gt_cur_freq_mhz", R_OK)) - BIC_PRESENT(BIC_GFXMHz); - - if (!access("/sys/class/drm/card0/gt_act_freq_mhz", R_OK) || - !access("/sys/class/graphics/fb0/device/drm/card0/gt_act_freq_mhz", R_OK)) - BIC_PRESENT(BIC_GFXACTMHz); - if (!access("/sys/devices/system/cpu/cpuidle/low_power_idle_cpu_residency_us", R_OK)) BIC_PRESENT(BIC_CPU_LPI); else -- cgit v1.2.3 From e7d7b82de192464b733fb2bcc9e305ea6f6ea47e Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Thu, 31 Aug 2023 16:01:36 +0800 Subject: tools/power/turbostat: Relocate lpi probing code Introduce probe_lpi(), and move all lpi probing related code into it. Signed-off-by: Zhang Rui Reviewed-by: Len Brown --- tools/power/x86/turbostat/turbostat.c | 38 ++++++++++++++++++++--------------- 1 file changed, 22 insertions(+), 16 deletions(-) diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c index feff9ecff368..ad9147757d5a 100644 --- a/tools/power/x86/turbostat/turbostat.c +++ b/tools/power/x86/turbostat/turbostat.c @@ -5374,6 +5374,26 @@ void probe_cstates(void) dump_sysfs_cstate_config(); } +void probe_lpi(void) +{ + if (!access("/sys/devices/system/cpu/cpuidle/low_power_idle_cpu_residency_us", R_OK)) + BIC_PRESENT(BIC_CPU_LPI); + else + BIC_NOT_PRESENT(BIC_CPU_LPI); + + if (!access(sys_lpi_file_sysfs, R_OK)) { + sys_lpi_file = sys_lpi_file_sysfs; + BIC_PRESENT(BIC_SYS_LPI); + } else if (!access(sys_lpi_file_debugfs, R_OK)) { + sys_lpi_file = sys_lpi_file_debugfs; + BIC_PRESENT(BIC_SYS_LPI); + } else { + sys_lpi_file_sysfs = NULL; + BIC_NOT_PRESENT(BIC_SYS_LPI); + } + +} + void probe_pstates(void) { probe_bclk(); @@ -5570,6 +5590,8 @@ void process_cpuid() probe_cstates(); + probe_lpi(); + probe_intel_uncore_frequency(); probe_graphics(); @@ -5579,27 +5601,11 @@ void process_cpuid() if (platform->has_nhm_msrs) BIC_PRESENT(BIC_SMI); - if (!access("/sys/devices/system/cpu/cpuidle/low_power_idle_cpu_residency_us", R_OK)) - BIC_PRESENT(BIC_CPU_LPI); - else - BIC_NOT_PRESENT(BIC_CPU_LPI); - if (!access("/sys/devices/system/cpu/cpu0/thermal_throttle/core_throttle_count", R_OK)) BIC_PRESENT(BIC_CORE_THROT_CNT); else BIC_NOT_PRESENT(BIC_CORE_THROT_CNT); - if (!access(sys_lpi_file_sysfs, R_OK)) { - sys_lpi_file = sys_lpi_file_sysfs; - BIC_PRESENT(BIC_SYS_LPI); - } else if (!access(sys_lpi_file_debugfs, R_OK)) { - sys_lpi_file = sys_lpi_file_debugfs; - BIC_PRESENT(BIC_SYS_LPI); - } else { - sys_lpi_file_sysfs = NULL; - BIC_NOT_PRESENT(BIC_SYS_LPI); - } - if (!quiet) decode_misc_feature_control(); -- cgit v1.2.3 From db735f8ba78bf7692579b78f0ca1e40563ef79fd Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Thu, 31 Aug 2023 16:02:16 +0800 Subject: tools/power/turbostat: Relocate thermal probing code Introduce probe_thermal(), and move all thermal probing related code into it. Signed-off-by: Zhang Rui Reviewed-by: Len Brown --- tools/power/x86/turbostat/turbostat.c | 15 ++++++++++----- 1 file changed, 10 insertions(+), 5 deletions(-) diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c index ad9147757d5a..8dae576234a4 100644 --- a/tools/power/x86/turbostat/turbostat.c +++ b/tools/power/x86/turbostat/turbostat.c @@ -4894,6 +4894,14 @@ void probe_rapl(void) rapl_probe_amd(); } +void probe_thermal(void) +{ + if (!access("/sys/devices/system/cpu/cpu0/thermal_throttle/core_throttle_count", R_OK)) + BIC_PRESENT(BIC_CORE_THROT_CNT); + else + BIC_NOT_PRESENT(BIC_CORE_THROT_CNT); +} + int print_thermal(struct thread_data *t, struct core_data *c, struct pkg_data *p) { unsigned long long msr; @@ -5598,14 +5606,11 @@ void process_cpuid() probe_rapl(); + probe_thermal(); + if (platform->has_nhm_msrs) BIC_PRESENT(BIC_SMI); - if (!access("/sys/devices/system/cpu/cpu0/thermal_throttle/core_throttle_count", R_OK)) - BIC_PRESENT(BIC_CORE_THROT_CNT); - else - BIC_NOT_PRESENT(BIC_CORE_THROT_CNT); - if (!quiet) decode_misc_feature_control(); -- cgit v1.2.3 From ce7a32c2a4cdba06ed5ead4ed8f980c893e20cd2 Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Wed, 30 Aug 2023 16:36:06 +0800 Subject: tools/power/turbostat: Reorder some functions Reorder some functions to solve code depdency introduced by next patch. No functional change. Signed-off-by: Zhang Rui Reviewed-by: Len Brown --- tools/power/x86/turbostat/turbostat.c | 214 +++++++++++++++++----------------- 1 file changed, 107 insertions(+), 107 deletions(-) diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c index 8dae576234a4..eb333612bdec 100644 --- a/tools/power/x86/turbostat/turbostat.c +++ b/tools/power/x86/turbostat/turbostat.c @@ -4878,92 +4878,6 @@ void rapl_probe_amd(void) fprintf(outf, "RAPL: %.0f sec. Joule Counter Range, at %.0f Watts\n", rapl_joule_counter_range, tdp); } -/* - * probe_rapl() - * - * sets rapl_power_units, rapl_energy_units, rapl_time_units - */ -void probe_rapl(void) -{ - if (!platform->rapl_msrs) - return; - - if (genuine_intel) - rapl_probe_intel(); - if (authentic_amd || hygon_genuine) - rapl_probe_amd(); -} - -void probe_thermal(void) -{ - if (!access("/sys/devices/system/cpu/cpu0/thermal_throttle/core_throttle_count", R_OK)) - BIC_PRESENT(BIC_CORE_THROT_CNT); - else - BIC_NOT_PRESENT(BIC_CORE_THROT_CNT); -} - -int print_thermal(struct thread_data *t, struct core_data *c, struct pkg_data *p) -{ - unsigned long long msr; - unsigned int dts, dts2; - int cpu; - - UNUSED(c); - UNUSED(p); - - if (!(do_dts || do_ptm)) - return 0; - - cpu = t->cpu_id; - - /* DTS is per-core, no need to print for each thread */ - if (!(t->flags & CPU_IS_FIRST_THREAD_IN_CORE)) - return 0; - - if (cpu_migrate(cpu)) { - fprintf(outf, "print_thermal: Could not migrate to CPU %d\n", cpu); - return -1; - } - - if (do_ptm && (t->flags & CPU_IS_FIRST_CORE_IN_PACKAGE)) { - if (get_msr(cpu, MSR_IA32_PACKAGE_THERM_STATUS, &msr)) - return 0; - - dts = (msr >> 16) & 0x7F; - fprintf(outf, "cpu%d: MSR_IA32_PACKAGE_THERM_STATUS: 0x%08llx (%d C)\n", cpu, msr, tj_max - dts); - - if (get_msr(cpu, MSR_IA32_PACKAGE_THERM_INTERRUPT, &msr)) - return 0; - - dts = (msr >> 16) & 0x7F; - dts2 = (msr >> 8) & 0x7F; - fprintf(outf, "cpu%d: MSR_IA32_PACKAGE_THERM_INTERRUPT: 0x%08llx (%d C, %d C)\n", - cpu, msr, tj_max - dts, tj_max - dts2); - } - - if (do_dts && debug) { - unsigned int resolution; - - if (get_msr(cpu, MSR_IA32_THERM_STATUS, &msr)) - return 0; - - dts = (msr >> 16) & 0x7F; - resolution = (msr >> 27) & 0xF; - fprintf(outf, "cpu%d: MSR_IA32_THERM_STATUS: 0x%08llx (%d C +/- %d)\n", - cpu, msr, tj_max - dts, resolution); - - if (get_msr(cpu, MSR_IA32_THERM_INTERRUPT, &msr)) - return 0; - - dts = (msr >> 16) & 0x7F; - dts2 = (msr >> 8) & 0x7F; - fprintf(outf, "cpu%d: MSR_IA32_THERM_INTERRUPT: 0x%08llx (%d C, %d C)\n", - cpu, msr, tj_max - dts, tj_max - dts2); - } - - return 0; -} - void print_power_limit_msr(int cpu, unsigned long long msr, char *label) { fprintf(outf, "cpu%d: %s: %sabled (%0.3f Watts, %f sec, clamp %sabled)\n", @@ -5095,29 +5009,20 @@ int print_rapl(struct thread_data *t, struct core_data *c, struct pkg_data *p) return 0; } -int get_cpu_type(struct thread_data *t, struct core_data *c, struct pkg_data *p) +/* + * probe_rapl() + * + * sets rapl_power_units, rapl_energy_units, rapl_time_units + */ +void probe_rapl(void) { - unsigned int eax, ebx, ecx, edx; - - UNUSED(c); - UNUSED(p); - - if (!genuine_intel) - return 0; - - if (cpu_migrate(t->cpu_id)) { - fprintf(outf, "Could not migrate to CPU %d\n", t->cpu_id); - return -1; - } - - if (max_level < 0x1a) - return 0; + if (!platform->rapl_msrs) + return; - __cpuid(0x1a, eax, ebx, ecx, edx); - eax = (eax >> 24) & 0xFF; - if (eax == 0x20) - t->is_atom = true; - return 0; + if (genuine_intel) + rapl_probe_intel(); + if (authentic_amd || hygon_genuine) + rapl_probe_amd(); } /* @@ -5200,6 +5105,101 @@ guess: return 0; } +int print_thermal(struct thread_data *t, struct core_data *c, struct pkg_data *p) +{ + unsigned long long msr; + unsigned int dts, dts2; + int cpu; + + UNUSED(c); + UNUSED(p); + + if (!(do_dts || do_ptm)) + return 0; + + cpu = t->cpu_id; + + /* DTS is per-core, no need to print for each thread */ + if (!(t->flags & CPU_IS_FIRST_THREAD_IN_CORE)) + return 0; + + if (cpu_migrate(cpu)) { + fprintf(outf, "print_thermal: Could not migrate to CPU %d\n", cpu); + return -1; + } + + if (do_ptm && (t->flags & CPU_IS_FIRST_CORE_IN_PACKAGE)) { + if (get_msr(cpu, MSR_IA32_PACKAGE_THERM_STATUS, &msr)) + return 0; + + dts = (msr >> 16) & 0x7F; + fprintf(outf, "cpu%d: MSR_IA32_PACKAGE_THERM_STATUS: 0x%08llx (%d C)\n", cpu, msr, tj_max - dts); + + if (get_msr(cpu, MSR_IA32_PACKAGE_THERM_INTERRUPT, &msr)) + return 0; + + dts = (msr >> 16) & 0x7F; + dts2 = (msr >> 8) & 0x7F; + fprintf(outf, "cpu%d: MSR_IA32_PACKAGE_THERM_INTERRUPT: 0x%08llx (%d C, %d C)\n", + cpu, msr, tj_max - dts, tj_max - dts2); + } + + if (do_dts && debug) { + unsigned int resolution; + + if (get_msr(cpu, MSR_IA32_THERM_STATUS, &msr)) + return 0; + + dts = (msr >> 16) & 0x7F; + resolution = (msr >> 27) & 0xF; + fprintf(outf, "cpu%d: MSR_IA32_THERM_STATUS: 0x%08llx (%d C +/- %d)\n", + cpu, msr, tj_max - dts, resolution); + + if (get_msr(cpu, MSR_IA32_THERM_INTERRUPT, &msr)) + return 0; + + dts = (msr >> 16) & 0x7F; + dts2 = (msr >> 8) & 0x7F; + fprintf(outf, "cpu%d: MSR_IA32_THERM_INTERRUPT: 0x%08llx (%d C, %d C)\n", + cpu, msr, tj_max - dts, tj_max - dts2); + } + + return 0; +} + +void probe_thermal(void) +{ + if (!access("/sys/devices/system/cpu/cpu0/thermal_throttle/core_throttle_count", R_OK)) + BIC_PRESENT(BIC_CORE_THROT_CNT); + else + BIC_NOT_PRESENT(BIC_CORE_THROT_CNT); +} + +int get_cpu_type(struct thread_data *t, struct core_data *c, struct pkg_data *p) +{ + unsigned int eax, ebx, ecx, edx; + + UNUSED(c); + UNUSED(p); + + if (!genuine_intel) + return 0; + + if (cpu_migrate(t->cpu_id)) { + fprintf(outf, "Could not migrate to CPU %d\n", t->cpu_id); + return -1; + } + + if (max_level < 0x1a) + return 0; + + __cpuid(0x1a, eax, ebx, ecx, edx); + eax = (eax >> 24) & 0xFF; + if (eax == 0x20) + t->is_atom = true; + return 0; +} + void decode_feature_control_msr(void) { unsigned long long msr; -- cgit v1.2.3 From 5612b2c89bd0a3a2f7c9e8756e6ead971b03f8a3 Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Wed, 30 Aug 2023 16:54:51 +0800 Subject: tools/power/turbostat: Relocate more probing related code Relocate more feature probing code outside of process_cpuids() into the corresponding probing functions. This improves the readability of code and the turbostat output. Signed-off-by: Zhang Rui Reviewed-by: Len Brown --- tools/power/x86/turbostat/turbostat.c | 37 ++++++++++++++++------------------- 1 file changed, 17 insertions(+), 20 deletions(-) diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c index eb333612bdec..ffeee48e8d85 100644 --- a/tools/power/x86/turbostat/turbostat.c +++ b/tools/power/x86/turbostat/turbostat.c @@ -5023,6 +5023,11 @@ void probe_rapl(void) rapl_probe_intel(); if (authentic_amd || hygon_genuine) rapl_probe_amd(); + + if (quiet) + return; + + for_all_cpus(print_rapl, ODD_COUNTERS); } /* @@ -5173,6 +5178,13 @@ void probe_thermal(void) BIC_PRESENT(BIC_CORE_THROT_CNT); else BIC_NOT_PRESENT(BIC_CORE_THROT_CNT); + + for_all_cpus(set_temperature_target, ODD_COUNTERS); + + if (quiet) + return; + + for_all_cpus(print_thermal, ODD_COUNTERS); } int get_cpu_type(struct thread_data *t, struct core_data *c, struct pkg_data *p) @@ -5380,6 +5392,7 @@ void probe_cstates(void) decode_c6_demotion_policy_msr(); print_dev_latency(); dump_sysfs_cstate_config(); + print_irtl(); } void probe_lpi(void) @@ -5413,6 +5426,10 @@ void probe_pstates(void) dump_turbo_ratio_info(); dump_sysfs_pstate_config(); decode_misc_pwr_mgmt_msr(); + + for_all_cpus(print_hwp, ODD_COUNTERS); + for_all_cpus(print_epb, ODD_COUNTERS); + for_all_cpus(print_perf_limit, ODD_COUNTERS); } void process_cpuid() @@ -5897,29 +5914,9 @@ void turbostat_init() process_cpuid(); linux_perf_init(); - if (!quiet) - for_all_cpus(print_hwp, ODD_COUNTERS); - - if (!quiet) - for_all_cpus(print_epb, ODD_COUNTERS); - - if (!quiet) - for_all_cpus(print_perf_limit, ODD_COUNTERS); - - if (!quiet) - for_all_cpus(print_rapl, ODD_COUNTERS); - - for_all_cpus(set_temperature_target, ODD_COUNTERS); - for_all_cpus(get_cpu_type, ODD_COUNTERS); for_all_cpus(get_cpu_type, EVEN_COUNTERS); - if (!quiet) - for_all_cpus(print_thermal, ODD_COUNTERS); - - if (!quiet) - print_irtl(); - if (DO_BIC(BIC_IPC)) (void)get_instr_count_fd(base_cpu); } -- cgit v1.2.3 From 7ee39d8d593e3d28eced0fa1a8c8c6bdcbd4156e Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Wed, 13 Sep 2023 23:32:39 +0800 Subject: tools/power/turbostat: Introduce probe_pm_features() Feature probe has nothing to do with CPUID, thus it should not be in process_cpuids(). Introduce probe_pm_features() and move all feature probing functions into it. Signed-off-by: Zhang Rui Reviewed-by: Len Brown --- tools/power/x86/turbostat/turbostat.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c index ffeee48e8d85..607152b36c1a 100644 --- a/tools/power/x86/turbostat/turbostat.c +++ b/tools/power/x86/turbostat/turbostat.c @@ -5610,7 +5610,10 @@ void process_cpuid() BIC_PRESENT(BIC_IRQ); BIC_PRESENT(BIC_TSC_MHz); +} +void probe_pm_features(void) +{ probe_pstates(); probe_cstates(); @@ -5630,8 +5633,6 @@ void process_cpuid() if (!quiet) decode_misc_feature_control(); - - return; } /* @@ -5912,6 +5913,7 @@ void turbostat_init() check_dev_msr(); check_permissions(); process_cpuid(); + probe_pm_features(); linux_perf_init(); for_all_cpus(get_cpu_type, ODD_COUNTERS); -- cgit v1.2.3 From 05ad96ff0fb9d1b16abb5022b9c62636c6780fc2 Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Sun, 27 Aug 2023 15:33:27 +0800 Subject: tools/power/turbostat: Enable MSR_CORE_C1_RES on recent Intel client platforms All recent Intel client platforms have MSR_CORE_C1_RES. Enable the support on these platforms, including CNL/ICL/LKF/RKL/TGL/ADL/RPL/MTL. Signed-off-by: Zhang Rui Reviewed-by: Len Brown --- tools/power/x86/turbostat/turbostat.c | 1 + 1 file changed, 1 insertion(+) diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c index 607152b36c1a..9895f348b637 100644 --- a/tools/power/x86/turbostat/turbostat.c +++ b/tools/power/x86/turbostat/turbostat.c @@ -604,6 +604,7 @@ static const struct platform_features cnl_features = { .supported_cstates = CC1 | CC6 | CC7 | PC2 | PC3 | PC6 | PC7 | PC8 | PC9 | PC10, .cst_limit = CST_LIMIT_HSW, .has_irtl_msrs = 1, + .has_msr_core_c1_res = 1, .has_ext_cst_msrs = 1, .trl_msrs = TRL_BASE, .tcc_offset_bits = 6, -- cgit v1.2.3 From 6b74a30b767e362eda7deeac52edcd546c5f6d8f Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Sat, 9 Sep 2023 13:26:51 +0800 Subject: tools/power/turbostat: Remove PC7/PC9 support on ADL/RPL Compared with other platforms that share cnl_features, ADL/RPL don't have PC7/PC9. Clone a new platform feature set from cnl_features for ADL/RPL, with PC7/PC9 removed. Signed-off-by: Zhang Rui Reviewed-by: Len Brown --- tools/power/x86/turbostat/turbostat.c | 29 +++++++++++++++++++++++------ 1 file changed, 23 insertions(+), 6 deletions(-) diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c index 9895f348b637..a769daa59b12 100644 --- a/tools/power/x86/turbostat/turbostat.c +++ b/tools/power/x86/turbostat/turbostat.c @@ -612,6 +612,23 @@ static const struct platform_features cnl_features = { .enable_tsc_tweak = 1, }; +static const struct platform_features adl_features = { + .has_msr_misc_feature_control = 1, + .has_msr_misc_pwr_mgmt = 1, + .has_nhm_msrs = 1, + .has_config_tdp = 1, + .bclk_freq = BCLK_100MHZ, + .supported_cstates = CC1 | CC6 | CC7 | PC2 | PC3 | PC6 | PC8 | PC10, + .cst_limit = CST_LIMIT_HSW, + .has_irtl_msrs = 1, + .has_msr_core_c1_res = 1, + .has_ext_cst_msrs = 1, + .trl_msrs = TRL_BASE, + .tcc_offset_bits = 6, + .rapl_msrs = RAPL_PKG_ALL | RAPL_CORE_ALL | RAPL_DRAM | RAPL_DRAM_PERF_STATUS | RAPL_GFX, + .enable_tsc_tweak = 1, +}; + static const struct platform_features skx_features = { .has_msr_misc_feature_control = 1, .has_msr_misc_pwr_mgmt = 1, @@ -812,11 +829,11 @@ static const struct platform_data turbostat_pdata[] = { { INTEL_FAM6_SAPPHIRERAPIDS_X, &spr_features }, { INTEL_FAM6_EMERALDRAPIDS_X, &spr_features }, { INTEL_FAM6_LAKEFIELD, &cnl_features }, - { INTEL_FAM6_ALDERLAKE, &cnl_features }, - { INTEL_FAM6_ALDERLAKE_L, &cnl_features }, - { INTEL_FAM6_RAPTORLAKE, &cnl_features }, - { INTEL_FAM6_RAPTORLAKE_P, &cnl_features }, - { INTEL_FAM6_RAPTORLAKE_S, &cnl_features }, + { INTEL_FAM6_ALDERLAKE, &adl_features }, + { INTEL_FAM6_ALDERLAKE_L, &adl_features }, + { INTEL_FAM6_RAPTORLAKE, &adl_features }, + { INTEL_FAM6_RAPTORLAKE_P, &adl_features }, + { INTEL_FAM6_RAPTORLAKE_S, &adl_features }, { INTEL_FAM6_METEORLAKE, &cnl_features }, { INTEL_FAM6_METEORLAKE_L, &cnl_features }, { INTEL_FAM6_ATOM_SILVERMONT, &slv_features }, @@ -828,7 +845,7 @@ static const struct platform_data turbostat_pdata[] = { { INTEL_FAM6_ATOM_TREMONT_D, &tmtd_features }, { INTEL_FAM6_ATOM_TREMONT, &tmt_features }, { INTEL_FAM6_ATOM_TREMONT_L, &tmt_features }, - { INTEL_FAM6_ATOM_GRACEMONT, &cnl_features }, + { INTEL_FAM6_ATOM_GRACEMONT, &adl_features }, { INTEL_FAM6_XEON_PHI_KNL, &knl_features }, { INTEL_FAM6_XEON_PHI_KNM, &knl_features }, /* -- cgit v1.2.3 From 71cfd1da9f0635ccd7124ad8b67b9aed596be491 Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Fri, 6 Oct 2023 11:01:17 +0800 Subject: tools/power/turbostat: Introduce cpu_allowed_set Turbostat supports "-c" parameter which limits output to system summary plus the specified cpu-set. But some code still uses cpu_present_set to read and dump the counters. Introduce cpu_allowed_set for code that should obey the specified cpu-set. No functional change. Signed-off-by: Zhang Rui --- tools/power/x86/turbostat/turbostat.c | 31 ++++++++++++++++++++++++++++--- 1 file changed, 28 insertions(+), 3 deletions(-) diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c index a769daa59b12..d8f44ea5b4bf 100644 --- a/tools/power/x86/turbostat/turbostat.c +++ b/tools/power/x86/turbostat/turbostat.c @@ -904,8 +904,8 @@ int backwards_count; char *progname; #define CPU_SUBSET_MAXCPUS 1024 /* need to use before probe... */ -cpu_set_t *cpu_present_set, *cpu_affinity_set, *cpu_subset; -size_t cpu_present_setsize, cpu_affinity_setsize, cpu_subset_size; +cpu_set_t *cpu_present_set, *cpu_allowed_set, *cpu_affinity_set, *cpu_subset; +size_t cpu_present_setsize, cpu_allowed_setsize, cpu_affinity_setsize, cpu_subset_size; #define MAX_ADDED_COUNTERS 8 #define MAX_ADDED_THREAD_COUNTERS 24 #define BITMASK_SIZE 32 @@ -1157,6 +1157,11 @@ int cpu_is_not_present(int cpu) return !CPU_ISSET_S(cpu, cpu_present_setsize, cpu_present_set); } +int cpu_is_not_allowed(int cpu) +{ + return !CPU_ISSET_S(cpu, cpu_allowed_setsize, cpu_allowed_set); +} + /* * run func(thread, core, package) in topology order * skip non-present cpus @@ -3396,6 +3401,10 @@ void free_all_buffers(void) cpu_present_set = NULL; cpu_present_setsize = 0; + CPU_FREE(cpu_allowed_set); + cpu_allowed_set = NULL; + cpu_allowed_setsize = 0; + CPU_FREE(cpu_affinity_set); cpu_affinity_set = NULL; cpu_affinity_setsize = 0; @@ -5697,13 +5706,29 @@ void topology_probe() CPU_ZERO_S(cpu_present_setsize, cpu_present_set); for_all_proc_cpus(mark_cpu_present); + /* + * Allocate and initialize cpu_allowed_set + */ + cpu_allowed_set = CPU_ALLOC((topo.max_cpu_num + 1)); + if (cpu_allowed_set == NULL) + err(3, "CPU_ALLOC"); + cpu_allowed_setsize = CPU_ALLOC_SIZE((topo.max_cpu_num + 1)); + CPU_ZERO_S(cpu_allowed_setsize, cpu_allowed_set); + /* * Validate that all cpus in cpu_subset are also in cpu_present_set */ for (i = 0; i < CPU_SUBSET_MAXCPUS; ++i) { - if (CPU_ISSET_S(i, cpu_subset_size, cpu_subset)) + if (!cpu_subset) { + if (CPU_ISSET_S(i, cpu_present_setsize, cpu_present_set)) + CPU_SET_S(i, cpu_allowed_setsize, cpu_allowed_set); + continue; + } + if (CPU_ISSET_S(i, cpu_subset_size, cpu_subset)) { if (!CPU_ISSET_S(i, cpu_present_setsize, cpu_present_set)) err(1, "cpu%d not present", i); + CPU_SET_S(i, cpu_allowed_setsize, cpu_allowed_set); + } } /* -- cgit v1.2.3 From 4ede6d1ce7acba9cafe7df4e935b174623cd2181 Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Wed, 4 Oct 2023 13:52:02 +0800 Subject: tools/power/turbostat: Obey allowed CPUs when accessing CPU counters for_all_cpus/for_all_cpus_2 are used for accessing the per CPU counters, and they should follow the cpu_allowed_set instead of cpu_present_set. Signed-off-by: Zhang Rui --- tools/power/x86/turbostat/turbostat.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c index d8f44ea5b4bf..202cf5231d7a 100644 --- a/tools/power/x86/turbostat/turbostat.c +++ b/tools/power/x86/turbostat/turbostat.c @@ -1182,7 +1182,7 @@ int for_all_cpus(int (func) (struct thread_data *, struct core_data *, struct pk t = GET_THREAD(thread_base, thread_no, core_no, node_no, pkg_no); - if (cpu_is_not_present(t->cpu_id)) + if (cpu_is_not_allowed(t->cpu_id)) continue; c = GET_CORE(core_base, core_no, node_no, pkg_no); @@ -3618,7 +3618,7 @@ int for_all_cpus_2(int (func) (struct thread_data *, struct core_data *, t = GET_THREAD(thread_base, thread_no, core_no, node_no, pkg_no); - if (cpu_is_not_present(t->cpu_id)) + if (cpu_is_not_allowed(t->cpu_id)) continue; t2 = GET_THREAD(thread_base2, thread_no, core_no, node_no, pkg_no); -- cgit v1.2.3 From 7bb3fe27ad4f62039b2ac80a2147452a608b474f Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Wed, 4 Oct 2023 14:25:25 +0800 Subject: tools/power/turbostat: Obey allowed CPUs during startup Set turbostat CPU affinity to make sure turbostat is running on one of the allowed CPUs. Set base_cpu to the first allowed CPU so that some platform information is dumped using one of the allowed CPUs. Signed-off-by: Zhang Rui --- tools/power/x86/turbostat/turbostat.c | 21 ++++++++++++++------- 1 file changed, 14 insertions(+), 7 deletions(-) diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c index 202cf5231d7a..f81ce832d17a 100644 --- a/tools/power/x86/turbostat/turbostat.c +++ b/tools/power/x86/turbostat/turbostat.c @@ -5731,6 +5731,10 @@ void topology_probe() } } + if (!CPU_COUNT_S(cpu_allowed_setsize, cpu_allowed_set)) + err(-ENODEV, "No valid cpus found"); + sched_setaffinity(0, cpu_allowed_setsize, cpu_allowed_set); + /* * Allocate and initialize cpu_affinity_set */ @@ -5941,12 +5945,17 @@ void setup_all_buffers(void) void set_base_cpu(void) { - base_cpu = sched_getcpu(); - if (base_cpu < 0) - err(-ENODEV, "No valid cpus found"); + int i; - if (debug > 1) - fprintf(outf, "base_cpu = %d\n", base_cpu); + for (i = 0; i < topo.max_cpu_num + 1; ++i) { + if (cpu_is_not_allowed(i)) + continue; + base_cpu = i; + if (debug > 1) + fprintf(outf, "base_cpu = %d\n", base_cpu); + return; + } + err(-ENODEV, "No valid cpus found"); } void turbostat_init() @@ -5976,8 +5985,6 @@ int fork_it(char **argv) first_counter_read = 0; if (status) exit(status); - /* clear affinity side-effect of get_counters() */ - sched_setaffinity(0, cpu_present_setsize, cpu_present_set); gettimeofday(&tv_even, (struct timezone *)NULL); child_pid = fork(); -- cgit v1.2.3 From 74318add132365db3026e281ac06836a26cda857 Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Wed, 4 Oct 2023 15:13:23 +0800 Subject: tools/power/turbostat: Abstract several functions When detecting the primary thread/core in a core/package, current code doesn't handle the allowed CPUs. Abstract several functions for further fix of this issue. No functional change. Signed-off-by: Zhang Rui --- tools/power/x86/turbostat/turbostat.c | 58 +++++++++++++++++++++++++---------- 1 file changed, 41 insertions(+), 17 deletions(-) diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c index f81ce832d17a..5f6bc076e1dd 100644 --- a/tools/power/x86/turbostat/turbostat.c +++ b/tools/power/x86/turbostat/turbostat.c @@ -1198,6 +1198,30 @@ int for_all_cpus(int (func) (struct thread_data *, struct core_data *, struct pk return 0; } +int is_cpu_first_thread_in_core(struct thread_data *t, struct core_data *c, struct pkg_data *p) +{ + UNUSED(c); + UNUSED(p); + + return (t->flags & CPU_IS_FIRST_THREAD_IN_CORE); +} + +int is_cpu_first_core_in_package(struct thread_data *t, struct core_data *c, struct pkg_data *p) +{ + UNUSED(c); + UNUSED(p); + + return (t->flags & CPU_IS_FIRST_CORE_IN_PACKAGE); +} + +int is_cpu_first_thread_in_package(struct thread_data *t, struct core_data *c, struct pkg_data *p) +{ + UNUSED(c); + UNUSED(p); + + return (t->flags & CPU_IS_FIRST_THREAD_IN_CORE) && (t->flags & CPU_IS_FIRST_CORE_IN_PACKAGE); +} + int cpu_migrate(int cpu) { CPU_ZERO_S(cpu_affinity_setsize, cpu_affinity_set); @@ -1682,11 +1706,11 @@ int format_counters(struct thread_data *t, struct core_data *c, struct pkg_data int printed = 0; /* if showing only 1st thread in core and this isn't one, bail out */ - if (show_core_only && !(t->flags & CPU_IS_FIRST_THREAD_IN_CORE)) + if (show_core_only && !is_cpu_first_thread_in_core(t, c, p)) return 0; /* if showing only 1st thread in pkg and this isn't one, bail out */ - if (show_pkg_only && !(t->flags & CPU_IS_FIRST_CORE_IN_PACKAGE)) + if (show_pkg_only && !is_cpu_first_core_in_package(t, c, p)) return 0; /*if not summary line and --cpu is used */ @@ -1820,7 +1844,7 @@ int format_counters(struct thread_data *t, struct core_data *c, struct pkg_data outp += sprintf(outp, "%s%.2f", (printed++ ? delim : ""), 100.0 * t->c1 / tsc); /* print per-core data only for 1st thread in core */ - if (!(t->flags & CPU_IS_FIRST_THREAD_IN_CORE)) + if (!is_cpu_first_thread_in_core(t, c, p)) goto done; if (DO_BIC(BIC_CPU_c3)) @@ -1867,7 +1891,7 @@ int format_counters(struct thread_data *t, struct core_data *c, struct pkg_data outp += sprintf(outp, fmt8, (printed++ ? delim : ""), c->core_energy * rapl_energy_units); /* print per-package data only for 1st core in package */ - if (!(t->flags & CPU_IS_FIRST_CORE_IN_PACKAGE)) + if (!is_cpu_first_core_in_package(t, c, p)) goto done; /* PkgTmp */ @@ -2202,7 +2226,7 @@ int delta_cpu(struct thread_data *t, struct core_data *c, int retval = 0; /* calculate core delta only for 1st thread in core */ - if (t->flags & CPU_IS_FIRST_THREAD_IN_CORE) + if (is_cpu_first_thread_in_core(t, c, p)) delta_core(c, c2); /* always calculate thread delta */ @@ -2211,7 +2235,7 @@ int delta_cpu(struct thread_data *t, struct core_data *c, return retval; /* calculate package delta only for 1st core in package */ - if (t->flags & CPU_IS_FIRST_CORE_IN_PACKAGE) + if (is_cpu_first_core_in_package(t, c, p)) retval = delta_package(p, p2); return retval; @@ -2325,7 +2349,7 @@ int sum_counters(struct thread_data *t, struct core_data *c, struct pkg_data *p) } /* sum per-core values only for 1st thread in core */ - if (!(t->flags & CPU_IS_FIRST_THREAD_IN_CORE)) + if (!is_cpu_first_thread_in_core(t, c, p)) return 0; average.cores.c3 += c->c3; @@ -2345,7 +2369,7 @@ int sum_counters(struct thread_data *t, struct core_data *c, struct pkg_data *p) } /* sum per-pkg values only for 1st core in pkg */ - if (!(t->flags & CPU_IS_FIRST_CORE_IN_PACKAGE)) + if (!is_cpu_first_core_in_package(t, c, p)) return 0; if (DO_BIC(BIC_Totl_c0)) @@ -2745,7 +2769,7 @@ retry: } /* collect core counters only for 1st thread in core */ - if (!(t->flags & CPU_IS_FIRST_THREAD_IN_CORE)) + if (!is_cpu_first_thread_in_core(t, c, p)) goto done; if (DO_BIC(BIC_CPU_c3) || soft_c1_residency_display(BIC_CPU_c3)) { @@ -2800,7 +2824,7 @@ retry: } /* collect package counters only for 1st core in package */ - if (!(t->flags & CPU_IS_FIRST_CORE_IN_PACKAGE)) + if (!is_cpu_first_core_in_package(t, c, p)) goto done; if (DO_BIC(BIC_Totl_c0)) { @@ -4581,7 +4605,7 @@ int print_epb(struct thread_data *t, struct core_data *c, struct pkg_data *p) cpu = t->cpu_id; /* EPB is per-package */ - if (!(t->flags & CPU_IS_FIRST_THREAD_IN_CORE) || !(t->flags & CPU_IS_FIRST_CORE_IN_PACKAGE)) + if (!is_cpu_first_thread_in_package(t, c, p)) return 0; if (cpu_migrate(cpu)) { @@ -4630,7 +4654,7 @@ int print_hwp(struct thread_data *t, struct core_data *c, struct pkg_data *p) cpu = t->cpu_id; /* MSR_HWP_CAPABILITIES is per-package */ - if (!(t->flags & CPU_IS_FIRST_THREAD_IN_CORE) || !(t->flags & CPU_IS_FIRST_CORE_IN_PACKAGE)) + if (!is_cpu_first_thread_in_package(t, c, p)) return 0; if (cpu_migrate(cpu)) { @@ -4713,7 +4737,7 @@ int print_perf_limit(struct thread_data *t, struct core_data *c, struct pkg_data cpu = t->cpu_id; /* per-package */ - if (!(t->flags & CPU_IS_FIRST_THREAD_IN_CORE) || !(t->flags & CPU_IS_FIRST_CORE_IN_PACKAGE)) + if (!is_cpu_first_thread_in_package(t, c, p)) return 0; if (cpu_migrate(cpu)) { @@ -4930,7 +4954,7 @@ int print_rapl(struct thread_data *t, struct core_data *c, struct pkg_data *p) return 0; /* RAPL counters are per package, so print only for 1st thread/package */ - if (!(t->flags & CPU_IS_FIRST_THREAD_IN_CORE) || !(t->flags & CPU_IS_FIRST_CORE_IN_PACKAGE)) + if (!is_cpu_first_thread_in_package(t, c, p)) return 0; cpu = t->cpu_id; @@ -5083,7 +5107,7 @@ int set_temperature_target(struct thread_data *t, struct core_data *c, struct pk return 0; /* this is a per-package concept */ - if (!(t->flags & CPU_IS_FIRST_THREAD_IN_CORE) || !(t->flags & CPU_IS_FIRST_CORE_IN_PACKAGE)) + if (!is_cpu_first_thread_in_package(t, c, p)) return 0; cpu = t->cpu_id; @@ -5152,7 +5176,7 @@ int print_thermal(struct thread_data *t, struct core_data *c, struct pkg_data *p cpu = t->cpu_id; /* DTS is per-core, no need to print for each thread */ - if (!(t->flags & CPU_IS_FIRST_THREAD_IN_CORE)) + if (!is_cpu_first_thread_in_core(t, c, p)) return 0; if (cpu_migrate(cpu)) { @@ -5160,7 +5184,7 @@ int print_thermal(struct thread_data *t, struct core_data *c, struct pkg_data *p return -1; } - if (do_ptm && (t->flags & CPU_IS_FIRST_CORE_IN_PACKAGE)) { + if (do_ptm && is_cpu_first_core_in_package(t, c, p)) { if (get_msr(cpu, MSR_IA32_PACKAGE_THERM_STATUS, &msr)) return 0; -- cgit v1.2.3 From ccf8a0528061b4ca5f5c0e73c8d888e7e6d8b054 Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Fri, 6 Oct 2023 09:59:14 +0800 Subject: tools/power/turbostat: Obey allowed CPUs for primary thread/core detection Thread_id doesn't tell if a CPU is allowed or not. Detect allowed CPUs only and use the first detected thread/core as the primary thread/core of a core/package. Signed-off-by: Zhang Rui --- tools/power/x86/turbostat/turbostat.c | 35 ++++++++++++++++------------------- 1 file changed, 16 insertions(+), 19 deletions(-) diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c index 5f6bc076e1dd..e586164906fa 100644 --- a/tools/power/x86/turbostat/turbostat.c +++ b/tools/power/x86/turbostat/turbostat.c @@ -926,12 +926,11 @@ struct thread_data { unsigned int x2apic_id; unsigned int flags; bool is_atom; -#define CPU_IS_FIRST_THREAD_IN_CORE 0x2 -#define CPU_IS_FIRST_CORE_IN_PACKAGE 0x4 unsigned long long counter[MAX_ADDED_THREAD_COUNTERS]; } *thread_even, *thread_odd; struct core_data { + int base_cpu; unsigned long long c3; unsigned long long c6; unsigned long long c7; @@ -944,6 +943,7 @@ struct core_data { } *core_even, *core_odd; struct pkg_data { + int base_cpu; unsigned long long pc2; unsigned long long pc3; unsigned long long pc6; @@ -1200,26 +1200,21 @@ int for_all_cpus(int (func) (struct thread_data *, struct core_data *, struct pk int is_cpu_first_thread_in_core(struct thread_data *t, struct core_data *c, struct pkg_data *p) { - UNUSED(c); UNUSED(p); - return (t->flags & CPU_IS_FIRST_THREAD_IN_CORE); + return ((int)t->cpu_id == c->base_cpu || c->base_cpu < 0); } int is_cpu_first_core_in_package(struct thread_data *t, struct core_data *c, struct pkg_data *p) { UNUSED(c); - UNUSED(p); - return (t->flags & CPU_IS_FIRST_CORE_IN_PACKAGE); + return ((int)t->cpu_id == p->base_cpu || p->base_cpu < 0); } int is_cpu_first_thread_in_package(struct thread_data *t, struct core_data *c, struct pkg_data *p) { - UNUSED(c); - UNUSED(p); - - return (t->flags & CPU_IS_FIRST_THREAD_IN_CORE) && (t->flags & CPU_IS_FIRST_CORE_IN_PACKAGE); + return is_cpu_first_thread_in_core(t, c, p) && is_cpu_first_core_in_package(t, c, p); } int cpu_migrate(int cpu) @@ -2263,9 +2258,6 @@ void clear_counters(struct thread_data *t, struct core_data *c, struct pkg_data t->irq_count = 0; t->smi_count = 0; - /* tells format_counters to dump all fields from this set */ - t->flags = CPU_IS_FIRST_THREAD_IN_CORE | CPU_IS_FIRST_CORE_IN_PACKAGE; - c->c3 = 0; c->c6 = 0; c->c7 = 0; @@ -5872,15 +5864,19 @@ void allocate_counters(struct thread_data **t, struct core_data **c, struct pkg_ if (*c == NULL) goto error; - for (i = 0; i < num_cores; i++) + for (i = 0; i < num_cores; i++) { (*c)[i].core_id = -1; + (*c)[i].base_cpu = -1; + } *p = calloc(topo.num_packages, sizeof(struct pkg_data)); if (*p == NULL) goto error; - for (i = 0; i < topo.num_packages; i++) + for (i = 0; i < topo.num_packages; i++) { (*p)[i].package_id = i; + (*p)[i].base_cpu = -1; + } return; error: @@ -5913,10 +5909,11 @@ void init_counter(struct thread_data *thread_base, struct core_data *core_base, p = GET_PKG(pkg_base, pkg_id); t->cpu_id = cpu_id; - if (thread_id == 0) { - t->flags |= CPU_IS_FIRST_THREAD_IN_CORE; - if (cpu_is_first_core_in_package(cpu_id)) - t->flags |= CPU_IS_FIRST_CORE_IN_PACKAGE; + if (!cpu_is_not_allowed(cpu_id)) { + if (c->base_cpu < 0) + c->base_cpu = t->cpu_id; + if (p->base_cpu < 0) + p->base_cpu = t->cpu_id; } c->core_id = core_id; -- cgit v1.2.3 From 0fe3752901370b83b63d4ddbce708b23c8e41ea9 Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Fri, 6 Oct 2023 18:35:26 +0800 Subject: tools/power/turbostat: Obey allowed CPUs for system summary System summary should summarize the information for allowed CPUs instead of all the present CPUs. Introduce topology information for allowed CPUs, and use them to get system summary. Signed-off-by: Zhang Rui --- tools/power/x86/turbostat/turbostat.c | 71 +++++++++++++++++++++++------------ 1 file changed, 46 insertions(+), 25 deletions(-) diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c index e586164906fa..91aa03989317 100644 --- a/tools/power/x86/turbostat/turbostat.c +++ b/tools/power/x86/turbostat/turbostat.c @@ -1134,6 +1134,9 @@ struct topo_params { int num_die; int num_cpus; int num_cores; + int allowed_packages; + int allowed_cpus; + int allowed_cores; int max_cpu_num; int max_node_num; int nodes_per_pkg; @@ -1179,7 +1182,6 @@ int for_all_cpus(int (func) (struct thread_data *, struct core_data *, struct pk struct thread_data *t; struct core_data *c; struct pkg_data *p; - t = GET_THREAD(thread_base, thread_no, core_no, node_no, pkg_no); if (cpu_is_not_allowed(t->cpu_id)) @@ -2426,40 +2428,40 @@ void compute_average(struct thread_data *t, struct core_data *c, struct pkg_data /* Use the global time delta for the average. */ average.threads.tv_delta = tv_delta; - average.threads.tsc /= topo.num_cpus; - average.threads.aperf /= topo.num_cpus; - average.threads.mperf /= topo.num_cpus; - average.threads.instr_count /= topo.num_cpus; - average.threads.c1 /= topo.num_cpus; + average.threads.tsc /= topo.allowed_cpus; + average.threads.aperf /= topo.allowed_cpus; + average.threads.mperf /= topo.allowed_cpus; + average.threads.instr_count /= topo.allowed_cpus; + average.threads.c1 /= topo.allowed_cpus; if (average.threads.irq_count > 9999999) sums_need_wide_columns = 1; - average.cores.c3 /= topo.num_cores; - average.cores.c6 /= topo.num_cores; - average.cores.c7 /= topo.num_cores; - average.cores.mc6_us /= topo.num_cores; + average.cores.c3 /= topo.allowed_cores; + average.cores.c6 /= topo.allowed_cores; + average.cores.c7 /= topo.allowed_cores; + average.cores.mc6_us /= topo.allowed_cores; if (DO_BIC(BIC_Totl_c0)) - average.packages.pkg_wtd_core_c0 /= topo.num_packages; + average.packages.pkg_wtd_core_c0 /= topo.allowed_packages; if (DO_BIC(BIC_Any_c0)) - average.packages.pkg_any_core_c0 /= topo.num_packages; + average.packages.pkg_any_core_c0 /= topo.allowed_packages; if (DO_BIC(BIC_GFX_c0)) - average.packages.pkg_any_gfxe_c0 /= topo.num_packages; + average.packages.pkg_any_gfxe_c0 /= topo.allowed_packages; if (DO_BIC(BIC_CPUGFX)) - average.packages.pkg_both_core_gfxe_c0 /= topo.num_packages; + average.packages.pkg_both_core_gfxe_c0 /= topo.allowed_packages; - average.packages.pc2 /= topo.num_packages; + average.packages.pc2 /= topo.allowed_packages; if (DO_BIC(BIC_Pkgpc3)) - average.packages.pc3 /= topo.num_packages; + average.packages.pc3 /= topo.allowed_packages; if (DO_BIC(BIC_Pkgpc6)) - average.packages.pc6 /= topo.num_packages; + average.packages.pc6 /= topo.allowed_packages; if (DO_BIC(BIC_Pkgpc7)) - average.packages.pc7 /= topo.num_packages; + average.packages.pc7 /= topo.allowed_packages; - average.packages.pc8 /= topo.num_packages; - average.packages.pc9 /= topo.num_packages; - average.packages.pc10 /= topo.num_packages; + average.packages.pc8 /= topo.allowed_packages; + average.packages.pc9 /= topo.allowed_packages; + average.packages.pc10 /= topo.allowed_packages; for (i = 0, mp = sys.tp; mp; i++, mp = mp->next) { if (mp->format == FORMAT_RAW) @@ -2469,7 +2471,7 @@ void compute_average(struct thread_data *t, struct core_data *c, struct pkg_data sums_need_wide_columns = 1; continue; } - average.threads.counter[i] /= topo.num_cpus; + average.threads.counter[i] /= topo.allowed_cpus; } for (i = 0, mp = sys.cp; mp; i++, mp = mp->next) { if (mp->format == FORMAT_RAW) @@ -2478,7 +2480,7 @@ void compute_average(struct thread_data *t, struct core_data *c, struct pkg_data if (average.cores.counter[i] > 9999999) sums_need_wide_columns = 1; } - average.cores.counter[i] /= topo.num_cores; + average.cores.counter[i] /= topo.allowed_cores; } for (i = 0, mp = sys.pp; mp; i++, mp = mp->next) { if (mp->format == FORMAT_RAW) @@ -2487,7 +2489,7 @@ void compute_average(struct thread_data *t, struct core_data *c, struct pkg_data if (average.packages.counter[i] > 9999999) sums_need_wide_columns = 1; } - average.packages.counter[i] /= topo.num_packages; + average.packages.counter[i] /= topo.allowed_packages; } } @@ -3690,7 +3692,7 @@ void re_initialize(void) { free_all_buffers(); setup_all_buffers(); - fprintf(outf, "turbostat: re-initialized with num_cpus %d\n", topo.num_cpus); + fprintf(outf, "turbostat: re-initialized with num_cpus %d, allowed_cpus %d\n", topo.num_cpus, topo.allowed_cpus); } void set_max_cpu_num(void) @@ -5953,6 +5955,24 @@ void allocate_irq_buffers(void) err(-1, "calloc %d", topo.max_cpu_num + 1); } +int update_topo(struct thread_data *t, struct core_data *c, struct pkg_data *p) +{ + topo.allowed_cpus++; + if ((int)t->cpu_id == c->base_cpu) + topo.allowed_cores++; + if ((int)t->cpu_id == p->base_cpu) + topo.allowed_packages++; + + return 0; +} + +void topology_update(void) +{ + topo.allowed_cpus = 0; + topo.allowed_cores = 0; + topo.allowed_packages = 0; + for_all_cpus(update_topo, ODD_COUNTERS); +} void setup_all_buffers(void) { topology_probe(); @@ -5962,6 +5982,7 @@ void setup_all_buffers(void) allocate_counters(&thread_odd, &core_odd, &package_odd); allocate_output_buffer(); for_all_proc_cpus(initialize_counters); + topology_update(); } void set_base_cpu(void) -- cgit v1.2.3 From c25ef0e5d9d7d5fb9e1679286fc7a11e70f16c70 Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Fri, 20 Oct 2023 14:20:47 +0800 Subject: tools/power/turbostat: Handle offlined CPUs in cpu_subset It is possible that the cpu_subset contains offlined CPUs. If this happens during start, exit immediately because this is likely an operator error that is best fixed by re-invoking. If this happens at runtime, give a warning only because turbostat should do its best effort to continue running. Signed-off-by: Zhang Rui --- tools/power/x86/turbostat/turbostat.c | 31 +++++++++++++++++++++---------- 1 file changed, 21 insertions(+), 10 deletions(-) diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c index 91aa03989317..f9ea07961a22 100644 --- a/tools/power/x86/turbostat/turbostat.c +++ b/tools/power/x86/turbostat/turbostat.c @@ -1149,7 +1149,7 @@ struct timeval tv_even, tv_odd, tv_delta; int *irq_column_2_cpu; /* /proc/interrupts column numbers */ int *irqs_per_cpu; /* indexed by cpu_num */ -void setup_all_buffers(void); +void setup_all_buffers(bool startup); char *sys_lpi_file; char *sys_lpi_file_sysfs = "/sys/devices/system/cpu/cpuidle/low_power_idle_system_residency_us"; @@ -3691,7 +3691,7 @@ int for_all_proc_cpus(int (func) (int)) void re_initialize(void) { free_all_buffers(); - setup_all_buffers(); + setup_all_buffers(false); fprintf(outf, "turbostat: re-initialized with num_cpus %d, allowed_cpus %d\n", topo.num_cpus, topo.allowed_cpus); } @@ -5692,7 +5692,7 @@ int dir_filter(const struct dirent *dirp) return 0; } -void topology_probe() +void topology_probe(bool startup) { int i; int max_core_id = 0; @@ -5734,7 +5734,12 @@ void topology_probe() CPU_ZERO_S(cpu_allowed_setsize, cpu_allowed_set); /* - * Validate that all cpus in cpu_subset are also in cpu_present_set + * Validate cpu_subset and update cpu_allowed_set. + * + * Make sure all cpus in cpu_subset are also in cpu_present_set during startup, + * and give a warning when cpus in cpu_subset become unavailable at runtime. + * + * cpu_allowed_set is the intersection of cpu_present_set and cpu_subset. */ for (i = 0; i < CPU_SUBSET_MAXCPUS; ++i) { if (!cpu_subset) { @@ -5743,9 +5748,15 @@ void topology_probe() continue; } if (CPU_ISSET_S(i, cpu_subset_size, cpu_subset)) { - if (!CPU_ISSET_S(i, cpu_present_setsize, cpu_present_set)) - err(1, "cpu%d not present", i); - CPU_SET_S(i, cpu_allowed_setsize, cpu_allowed_set); + if (!CPU_ISSET_S(i, cpu_present_setsize, cpu_present_set)) { + /* all cpus in cpu_subset must be in cpu_present_set during startup */ + if (startup) + err(1, "cpu%d not present", i); + else + fprintf(stderr, "cpu%d not present\n", i); + } else { + CPU_SET_S(i, cpu_allowed_setsize, cpu_allowed_set); + } } } @@ -5973,9 +5984,9 @@ void topology_update(void) topo.allowed_packages = 0; for_all_cpus(update_topo, ODD_COUNTERS); } -void setup_all_buffers(void) +void setup_all_buffers(bool startup) { - topology_probe(); + topology_probe(startup); allocate_irq_buffers(); allocate_fd_percpu(); allocate_counters(&thread_even, &core_even, &package_even); @@ -6002,7 +6013,7 @@ void set_base_cpu(void) void turbostat_init() { - setup_all_buffers(); + setup_all_buffers(true); set_base_cpu(); check_dev_msr(); check_permissions(); -- cgit v1.2.3 From 8c3dd2c9e54273922ea71b2a4c0e77fc624c396b Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Fri, 20 Oct 2023 09:45:21 +0800 Subject: tools/power/turbostat: Abstrct function for parsing cpu string Abstract parse_cpu_str() which can update any specified cpu_set by a given cpu string. This can be used to handle further CPU limitations from other sources like cgroup. The cpu string parsing code is also enhanced to handle the strings that have an extra '\n' before string terminator. Signed-off-by: Zhang Rui --- tools/power/x86/turbostat/turbostat.c | 104 ++++++++++++++++++---------------- 1 file changed, 55 insertions(+), 49 deletions(-) diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c index f9ea07961a22..3a759b49f25e 100644 --- a/tools/power/x86/turbostat/turbostat.c +++ b/tools/power/x86/turbostat/turbostat.c @@ -3565,6 +3565,59 @@ int get_physical_node_id(struct cpu_topology *thiscpu) return -1; } +static int parse_cpu_str(char *cpu_str, cpu_set_t *cpu_set, int cpu_set_size) +{ + unsigned int start, end; + char *next = cpu_str; + + while (next && *next) { + + if (*next == '-') /* no negative cpu numbers */ + return 1; + + start = strtoul(next, &next, 10); + + if (start >= CPU_SUBSET_MAXCPUS) + return 1; + CPU_SET_S(start, cpu_set_size, cpu_set); + + if (*next == '\0' || *next == '\n') + break; + + if (*next == ',') { + next += 1; + continue; + } + + if (*next == '-') { + next += 1; /* start range */ + } else if (*next == '.') { + next += 1; + if (*next == '.') + next += 1; /* start range */ + else + return 1; + } + + end = strtoul(next, &next, 10); + if (end <= start) + return 1; + + while (++start <= end) { + if (start >= CPU_SUBSET_MAXCPUS) + return 1; + CPU_SET_S(start, cpu_set_size, cpu_set); + } + + if (*next == ',') + next += 1; + else if (*next != '\0' && *next != '\n') + return 1; + } + + return 0; +} + int get_thread_siblings(struct cpu_topology *thiscpu) { char path[80], character; @@ -6384,9 +6437,6 @@ void probe_sysfs(void) */ void parse_cpu_command(char *optarg) { - unsigned int start, end; - char *next; - if (!strcmp(optarg, "core")) { if (cpu_subset) goto error; @@ -6409,52 +6459,8 @@ void parse_cpu_command(char *optarg) CPU_ZERO_S(cpu_subset_size, cpu_subset); - next = optarg; - - while (next && *next) { - - if (*next == '-') /* no negative cpu numbers */ - goto error; - - start = strtoul(next, &next, 10); - - if (start >= CPU_SUBSET_MAXCPUS) - goto error; - CPU_SET_S(start, cpu_subset_size, cpu_subset); - - if (*next == '\0') - break; - - if (*next == ',') { - next += 1; - continue; - } - - if (*next == '-') { - next += 1; /* start range */ - } else if (*next == '.') { - next += 1; - if (*next == '.') - next += 1; /* start range */ - else - goto error; - } - - end = strtoul(next, &next, 10); - if (end <= start) - goto error; - - while (++start <= end) { - if (start >= CPU_SUBSET_MAXCPUS) - goto error; - CPU_SET_S(start, cpu_subset_size, cpu_subset); - } - - if (*next == ',') - next += 1; - else if (*next != '\0') - goto error; - } + if (parse_cpu_str(optarg, cpu_subset, cpu_subset_size)) + goto error; return; -- cgit v1.2.3 From f638858da0925b29122f05135663013dc240eaf9 Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Fri, 20 Oct 2023 09:39:22 +0800 Subject: tools/power/turbostat: Handle cgroup v2 cpu limitation CPUs can be isolated via cgroup settings and turbostat should avoid migrating to these CPUs, just like it does for the '-c' cpus. Introduce cpu_effective_set to save the cgroup cpu limitation info from /sys/fs/cgroup/cpuset.cpus.effective. And use cpu_allowed_set as the intersection of cpu_present_set, cpu_effective_set and cpu_subset. Signed-off-by: Zhang Rui --- tools/power/x86/turbostat/turbostat.c | 95 +++++++++++++++++++++++++++++------ 1 file changed, 80 insertions(+), 15 deletions(-) diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c index 3a759b49f25e..0ef6fba118b1 100644 --- a/tools/power/x86/turbostat/turbostat.c +++ b/tools/power/x86/turbostat/turbostat.c @@ -904,8 +904,8 @@ int backwards_count; char *progname; #define CPU_SUBSET_MAXCPUS 1024 /* need to use before probe... */ -cpu_set_t *cpu_present_set, *cpu_allowed_set, *cpu_affinity_set, *cpu_subset; -size_t cpu_present_setsize, cpu_allowed_setsize, cpu_affinity_setsize, cpu_subset_size; +cpu_set_t *cpu_present_set, *cpu_effective_set, *cpu_allowed_set, *cpu_affinity_set, *cpu_subset; +size_t cpu_present_setsize, cpu_effective_setsize, cpu_allowed_setsize, cpu_affinity_setsize, cpu_subset_size; #define MAX_ADDED_COUNTERS 8 #define MAX_ADDED_THREAD_COUNTERS 24 #define BITMASK_SIZE 32 @@ -3419,6 +3419,10 @@ void free_all_buffers(void) cpu_present_set = NULL; cpu_present_setsize = 0; + CPU_FREE(cpu_effective_set); + cpu_effective_set = NULL; + cpu_effective_setsize = 0; + CPU_FREE(cpu_allowed_set); cpu_allowed_set = NULL; cpu_allowed_setsize = 0; @@ -3741,6 +3745,46 @@ int for_all_proc_cpus(int (func) (int)) return 0; } +#define PATH_EFFECTIVE_CPUS "/sys/fs/cgroup/cpuset.cpus.effective" + +static char cpu_effective_str[1024]; + +static int update_effective_str(bool startup) +{ + FILE *fp; + char *pos; + char buf[1024]; + int ret; + + if (cpu_effective_str[0] == '\0' && !startup) + return 0; + + fp = fopen(PATH_EFFECTIVE_CPUS, "r"); + if (!fp) + return 0; + + pos = fgets(buf, 1024, fp); + if (!pos) + err(1, "%s: file read failed\n", PATH_EFFECTIVE_CPUS); + + fclose(fp); + + ret = strncmp(cpu_effective_str, buf, 1024); + if (!ret) + return 0; + + strncpy(cpu_effective_str, buf, 1024); + return 1; +} + +static void update_effective_set(bool startup) +{ + update_effective_str(startup); + + if (parse_cpu_str(cpu_effective_str, cpu_effective_set, cpu_effective_setsize)) + err(1, "%s: cpu str malformat %s\n", PATH_EFFECTIVE_CPUS, cpu_effective_str); +} + void re_initialize(void) { free_all_buffers(); @@ -4257,6 +4301,10 @@ restart: re_initialize(); goto restart; } + if (update_effective_str(false)) { + re_initialize(); + goto restart; + } do_sleep(); if (snapshot_proc_sysfs_files()) goto restart; @@ -5777,6 +5825,16 @@ void topology_probe(bool startup) CPU_ZERO_S(cpu_present_setsize, cpu_present_set); for_all_proc_cpus(mark_cpu_present); + /* + * Allocate and initialize cpu_effective_set + */ + cpu_effective_set = CPU_ALLOC((topo.max_cpu_num + 1)); + if (cpu_effective_set == NULL) + err(3, "CPU_ALLOC"); + cpu_effective_setsize = CPU_ALLOC_SIZE((topo.max_cpu_num + 1)); + CPU_ZERO_S(cpu_effective_setsize, cpu_effective_set); + update_effective_set(startup); + /* * Allocate and initialize cpu_allowed_set */ @@ -5787,30 +5845,37 @@ void topology_probe(bool startup) CPU_ZERO_S(cpu_allowed_setsize, cpu_allowed_set); /* - * Validate cpu_subset and update cpu_allowed_set. + * Validate and update cpu_allowed_set. * - * Make sure all cpus in cpu_subset are also in cpu_present_set during startup, - * and give a warning when cpus in cpu_subset become unavailable at runtime. + * Make sure all cpus in cpu_subset are also in cpu_present_set during startup. + * Give a warning when cpus in cpu_subset become unavailable at runtime. + * Give a warning when cpus are not effective because of cgroup setting. * - * cpu_allowed_set is the intersection of cpu_present_set and cpu_subset. + * cpu_allowed_set is the intersection of cpu_present_set/cpu_effective_set/cpu_subset. */ for (i = 0; i < CPU_SUBSET_MAXCPUS; ++i) { - if (!cpu_subset) { - if (CPU_ISSET_S(i, cpu_present_setsize, cpu_present_set)) - CPU_SET_S(i, cpu_allowed_setsize, cpu_allowed_set); + if (cpu_subset && !CPU_ISSET_S(i, cpu_subset_size, cpu_subset)) continue; - } - if (CPU_ISSET_S(i, cpu_subset_size, cpu_subset)) { - if (!CPU_ISSET_S(i, cpu_present_setsize, cpu_present_set)) { - /* all cpus in cpu_subset must be in cpu_present_set during startup */ + + if (!CPU_ISSET_S(i, cpu_present_setsize, cpu_present_set)) { + if (cpu_subset) { + /* cpus in cpu_subset must be in cpu_present_set during startup */ if (startup) err(1, "cpu%d not present", i); else fprintf(stderr, "cpu%d not present\n", i); - } else { - CPU_SET_S(i, cpu_allowed_setsize, cpu_allowed_set); } + continue; } + + if (CPU_COUNT_S(cpu_effective_setsize, cpu_effective_set)) { + if (!CPU_ISSET_S(i, cpu_effective_setsize, cpu_effective_set)) { + fprintf(stderr, "cpu%d not effective\n", i); + continue; + } + } + + CPU_SET_S(i, cpu_allowed_setsize, cpu_allowed_set); } if (!CPU_COUNT_S(cpu_allowed_setsize, cpu_allowed_set)) -- cgit v1.2.3 From 37f68a2940558b4f6f8e51b7b1d00f084b4bdde2 Mon Sep 17 00:00:00 2001 From: Srinivas Pandruvada Date: Tue, 24 Jan 2023 10:39:53 -0800 Subject: tools/power/turbostat: Move process to root cgroup When available CPUs are reduced via cgroup cpuset controller, turbostat will exit with errors (For example): get_counters: Could not migrate to CPU 0 turbostat: re-initialized with num_cpus 20 get_counters: Could not migrate to CPU 0 turbostat: re-initialized with num_cpus 20 Move the turbostat to root cgroup, which has every CPU. Writing the value 0 to a cgroup.procs file causes the writing process to be moved to the corresponding cgroup. Signed-off-by: Srinivas Pandruvada Tested-by: Zhang Rui --- tools/power/x86/turbostat/turbostat.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c index 0ef6fba118b1..fea63d9d8e02 100644 --- a/tools/power/x86/turbostat/turbostat.c +++ b/tools/power/x86/turbostat/turbostat.c @@ -6666,6 +6666,19 @@ void cmdline(int argc, char **argv) int main(int argc, char **argv) { + int fd, ret; + + fd = open("/sys/fs/cgroup/cgroup.procs", O_WRONLY); + if (fd < 0) + goto skip_cgroup_setting; + + ret = write(fd, "0\n", 2); + if (ret == -1) + perror("Can't update cgroup\n"); + + close(fd); + +skip_cgroup_setting: outf = stderr; cmdline(argc, argv); -- cgit v1.2.3 From 0e3f10e6aa97b0134b526ec9cdc3ccdac2239b43 Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Thu, 19 Oct 2023 11:04:33 +0800 Subject: tools/power/turbostat: Add MSR_CORE_C1_RES support for spr_features Add MSR_CORE_C1_RES support for spr_features because both Sapphirerapids and Emeraldrapids support this MSR. Signed-off-by: Zhang Rui --- tools/power/x86/turbostat/turbostat.c | 1 + 1 file changed, 1 insertion(+) diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c index fea63d9d8e02..bbeeec02bf5b 100644 --- a/tools/power/x86/turbostat/turbostat.c +++ b/tools/power/x86/turbostat/turbostat.c @@ -667,6 +667,7 @@ static const struct platform_features spr_features = { .bclk_freq = BCLK_100MHZ, .supported_cstates = CC1 | CC6 | PC2 | PC6, .cst_limit = CST_LIMIT_SKX, + .has_msr_core_c1_res = 1, .has_irtl_msrs = 1, .has_cst_prewake_bit = 1, .trl_msrs = TRL_BASE | TRL_CORECOUNT, -- cgit v1.2.3 From 5feab4a6b8a730438a0fe8758dfa0700f951edde Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Sat, 9 Sep 2023 13:28:07 +0800 Subject: tools/power/turbostat: Add initial support for GraniteRapids Add initial support for GraniteRapids. It shares the same features with SapphireRapids. Signed-off-by: Zhang Rui --- tools/power/x86/turbostat/turbostat.c | 1 + 1 file changed, 1 insertion(+) diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c index bbeeec02bf5b..981d39454b49 100644 --- a/tools/power/x86/turbostat/turbostat.c +++ b/tools/power/x86/turbostat/turbostat.c @@ -829,6 +829,7 @@ static const struct platform_data turbostat_pdata[] = { { INTEL_FAM6_TIGERLAKE, &cnl_features }, { INTEL_FAM6_SAPPHIRERAPIDS_X, &spr_features }, { INTEL_FAM6_EMERALDRAPIDS_X, &spr_features }, + { INTEL_FAM6_GRANITERAPIDS_X, &spr_features }, { INTEL_FAM6_LAKEFIELD, &cnl_features }, { INTEL_FAM6_ALDERLAKE, &adl_features }, { INTEL_FAM6_ALDERLAKE_L, &adl_features }, -- cgit v1.2.3 From d33605f367414c7e0009978d1fbe9af01a36e221 Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Thu, 28 Sep 2023 13:09:02 +0800 Subject: tools/power/turbostat: Add initial support for SierraForest Add initial support for SierraForest. It shares the same features with SapphireRapids, except that it has MSR_MODULE_C6_RES_MS support. Signed-off-by: Zhang Rui --- tools/power/x86/turbostat/turbostat.c | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c index 981d39454b49..a50b6d071f6a 100644 --- a/tools/power/x86/turbostat/turbostat.c +++ b/tools/power/x86/turbostat/turbostat.c @@ -674,6 +674,22 @@ static const struct platform_features spr_features = { .rapl_msrs = RAPL_PKG_ALL | RAPL_DRAM_ALL, }; +static const struct platform_features srf_features = { + .has_msr_misc_feature_control = 1, + .has_msr_misc_pwr_mgmt = 1, + .has_nhm_msrs = 1, + .has_config_tdp = 1, + .bclk_freq = BCLK_100MHZ, + .supported_cstates = CC1 | CC6 | PC2 | PC6, + .cst_limit = CST_LIMIT_SKX, + .has_msr_core_c1_res = 1, + .has_msr_module_c6_res_ms = 1, + .has_irtl_msrs = 1, + .has_cst_prewake_bit = 1, + .trl_msrs = TRL_BASE | TRL_CORECOUNT, + .rapl_msrs = RAPL_PKG_ALL | RAPL_DRAM_ALL, +}; + static const struct platform_features slv_features = { .has_nhm_msrs = 1, .bclk_freq = BCLK_SLV, @@ -848,6 +864,7 @@ static const struct platform_data turbostat_pdata[] = { { INTEL_FAM6_ATOM_TREMONT, &tmt_features }, { INTEL_FAM6_ATOM_TREMONT_L, &tmt_features }, { INTEL_FAM6_ATOM_GRACEMONT, &adl_features }, + { INTEL_FAM6_ATOM_CRESTMONT_X, &srf_features }, { INTEL_FAM6_XEON_PHI_KNL, &knl_features }, { INTEL_FAM6_XEON_PHI_KNM, &knl_features }, /* -- cgit v1.2.3 From 5a6efcb9102af4210d5a59182dbfbc594ae50fd4 Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Thu, 19 Oct 2023 11:00:07 +0800 Subject: tools/power/turbostat: Add initial support for GrandRidge Add initial support for GrandRidge. It shares the same features as SierraForest, except that it does not support PC2/PC6. Signed-off-by: Zhang Rui --- tools/power/x86/turbostat/turbostat.c | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c index a50b6d071f6a..3407f08593f8 100644 --- a/tools/power/x86/turbostat/turbostat.c +++ b/tools/power/x86/turbostat/turbostat.c @@ -690,6 +690,22 @@ static const struct platform_features srf_features = { .rapl_msrs = RAPL_PKG_ALL | RAPL_DRAM_ALL, }; +static const struct platform_features grr_features = { + .has_msr_misc_feature_control = 1, + .has_msr_misc_pwr_mgmt = 1, + .has_nhm_msrs = 1, + .has_config_tdp = 1, + .bclk_freq = BCLK_100MHZ, + .supported_cstates = CC1 | CC6, + .cst_limit = CST_LIMIT_SKX, + .has_msr_core_c1_res = 1, + .has_msr_module_c6_res_ms = 1, + .has_irtl_msrs = 1, + .has_cst_prewake_bit = 1, + .trl_msrs = TRL_BASE | TRL_CORECOUNT, + .rapl_msrs = RAPL_PKG_ALL | RAPL_DRAM_ALL, +}; + static const struct platform_features slv_features = { .has_nhm_msrs = 1, .bclk_freq = BCLK_SLV, @@ -865,6 +881,7 @@ static const struct platform_data turbostat_pdata[] = { { INTEL_FAM6_ATOM_TREMONT_L, &tmt_features }, { INTEL_FAM6_ATOM_GRACEMONT, &adl_features }, { INTEL_FAM6_ATOM_CRESTMONT_X, &srf_features }, + { INTEL_FAM6_ATOM_CRESTMONT, &grr_features }, { INTEL_FAM6_XEON_PHI_KNL, &knl_features }, { INTEL_FAM6_XEON_PHI_KNM, &knl_features }, /* -- cgit v1.2.3 From 7b57e7b683e3872b02117f46bd7dc7ad765888a8 Mon Sep 17 00:00:00 2001 From: Sumeet Pawnikar Date: Tue, 23 May 2023 17:46:45 +0530 Subject: tools/power/turbostat: Add initial support for ArrowLake Add initial support for ArrowLake platform. It shares the same features with CannonLake. Signed-off-by: Sumeet Pawnikar --- tools/power/x86/turbostat/turbostat.c | 1 + 1 file changed, 1 insertion(+) diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c index 3407f08593f8..6c52cceae1d7 100644 --- a/tools/power/x86/turbostat/turbostat.c +++ b/tools/power/x86/turbostat/turbostat.c @@ -870,6 +870,7 @@ static const struct platform_data turbostat_pdata[] = { { INTEL_FAM6_RAPTORLAKE_S, &adl_features }, { INTEL_FAM6_METEORLAKE, &cnl_features }, { INTEL_FAM6_METEORLAKE_L, &cnl_features }, + { INTEL_FAM6_ARROWLAKE, &cnl_features }, { INTEL_FAM6_ATOM_SILVERMONT, &slv_features }, { INTEL_FAM6_ATOM_SILVERMONT_D, &slvd_features }, { INTEL_FAM6_ATOM_AIRMONT, &amt_features }, -- cgit v1.2.3 From 956dbd3de400a5665faf08a8588556db9c1bb56e Mon Sep 17 00:00:00 2001 From: Sumeet Pawnikar Date: Tue, 23 May 2023 17:46:45 +0530 Subject: tools/power/turbostat: Add initial support for LunarLake Add initial support for LunarLake platform. It shares the same features with CannonLake. Signed-off-by: Sumeet Pawnikar --- tools/power/x86/turbostat/turbostat.c | 1 + 1 file changed, 1 insertion(+) diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c index 6c52cceae1d7..8a311d7272e7 100644 --- a/tools/power/x86/turbostat/turbostat.c +++ b/tools/power/x86/turbostat/turbostat.c @@ -871,6 +871,7 @@ static const struct platform_data turbostat_pdata[] = { { INTEL_FAM6_METEORLAKE, &cnl_features }, { INTEL_FAM6_METEORLAKE_L, &cnl_features }, { INTEL_FAM6_ARROWLAKE, &cnl_features }, + { INTEL_FAM6_LUNARLAKE_M, &cnl_features }, { INTEL_FAM6_ATOM_SILVERMONT, &slv_features }, { INTEL_FAM6_ATOM_SILVERMONT_D, &slvd_features }, { INTEL_FAM6_ATOM_AIRMONT, &amt_features }, -- cgit v1.2.3 From 3503895788d402d6a3814085ed582c364ec3e903 Mon Sep 17 00:00:00 2001 From: "Michael S. Tsirkin" Date: Tue, 31 Oct 2023 12:02:06 -0400 Subject: virtio_pci: move structure to a header These are guest/host interfaces, so they belong in the header where e.g. qemu will know to find them. Note: we added a new structure as opposed to extending existing one because someone might be relying on the size of the existing structure staying unchanged. Add a warning to avoid using sizeof. Signed-off-by: Michael S. Tsirkin Reviewed-by: Xuan Zhuo --- drivers/virtio/virtio_pci_modern_dev.c | 7 ++++--- include/linux/virtio_pci_modern.h | 7 ------- include/uapi/linux/virtio_pci.h | 11 +++++++++++ 3 files changed, 15 insertions(+), 10 deletions(-) diff --git a/drivers/virtio/virtio_pci_modern_dev.c b/drivers/virtio/virtio_pci_modern_dev.c index e2a1fe7bb66c..7de8b1ebabac 100644 --- a/drivers/virtio/virtio_pci_modern_dev.c +++ b/drivers/virtio/virtio_pci_modern_dev.c @@ -294,9 +294,10 @@ int vp_modern_probe(struct virtio_pci_modern_device *mdev) err = -EINVAL; mdev->common = vp_modern_map_capability(mdev, common, - sizeof(struct virtio_pci_common_cfg), 4, - 0, sizeof(struct virtio_pci_modern_common_cfg), - &mdev->common_len, NULL); + sizeof(struct virtio_pci_common_cfg), 4, 0, + offsetofend(struct virtio_pci_modern_common_cfg, + queue_reset), + &mdev->common_len, NULL); if (!mdev->common) goto err_map_common; mdev->isr = vp_modern_map_capability(mdev, isr, sizeof(u8), 1, diff --git a/include/linux/virtio_pci_modern.h b/include/linux/virtio_pci_modern.h index d0f2797420f7..a09e13a577a9 100644 --- a/include/linux/virtio_pci_modern.h +++ b/include/linux/virtio_pci_modern.h @@ -5,13 +5,6 @@ #include #include -struct virtio_pci_modern_common_cfg { - struct virtio_pci_common_cfg cfg; - - __le16 queue_notify_data; /* read-write */ - __le16 queue_reset; /* read-write */ -}; - /** * struct virtio_pci_modern_device - info for modern PCI virtio * @pci_dev: Ptr to the PCI device struct diff --git a/include/uapi/linux/virtio_pci.h b/include/uapi/linux/virtio_pci.h index f703afc7ad31..44f4dd2add18 100644 --- a/include/uapi/linux/virtio_pci.h +++ b/include/uapi/linux/virtio_pci.h @@ -166,6 +166,17 @@ struct virtio_pci_common_cfg { __le32 queue_used_hi; /* read-write */ }; +/* + * Warning: do not use sizeof on this: use offsetofend for + * specific fields you need. + */ +struct virtio_pci_modern_common_cfg { + struct virtio_pci_common_cfg cfg; + + __le16 queue_notify_data; /* read-write */ + __le16 queue_reset; /* read-write */ +}; + /* Fields in VIRTIO_PCI_CAP_PCI_CFG: */ struct virtio_pci_cfg_cap { struct virtio_pci_cap cap; -- cgit v1.2.3 From 0d82410252ea324f0064e75b9865bb74cccc1dda Mon Sep 17 00:00:00 2001 From: Stefano Garzarella Date: Tue, 31 Oct 2023 15:43:39 +0100 Subject: vdpa_sim_blk: allocate the buffer zeroed MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Deleting and recreating a device can lead to having the same content as the old device, so let's always allocate buffers completely zeroed out. Fixes: abebb16254b3 ("vdpa_sim_blk: support shared backend") Suggested-by: Qing Wang Signed-off-by: Stefano Garzarella Message-Id: <20231031144339.121453-1-sgarzare@redhat.com> Signed-off-by: Michael S. Tsirkin Acked-by: Eugenio Pérez Acked-by: Jason Wang --- drivers/vdpa/vdpa_sim/vdpa_sim_blk.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/vdpa/vdpa_sim/vdpa_sim_blk.c b/drivers/vdpa/vdpa_sim/vdpa_sim_blk.c index b3a3cb165795..b137f3679343 100644 --- a/drivers/vdpa/vdpa_sim/vdpa_sim_blk.c +++ b/drivers/vdpa/vdpa_sim/vdpa_sim_blk.c @@ -437,7 +437,7 @@ static int vdpasim_blk_dev_add(struct vdpa_mgmt_dev *mdev, const char *name, if (blk->shared_backend) { blk->buffer = shared_buffer; } else { - blk->buffer = kvmalloc(VDPASIM_BLK_CAPACITY << SECTOR_SHIFT, + blk->buffer = kvzalloc(VDPASIM_BLK_CAPACITY << SECTOR_SHIFT, GFP_KERNEL); if (!blk->buffer) { ret = -ENOMEM; @@ -495,7 +495,7 @@ static int __init vdpasim_blk_init(void) goto parent_err; if (shared_backend) { - shared_buffer = kvmalloc(VDPASIM_BLK_CAPACITY << SECTOR_SHIFT, + shared_buffer = kvzalloc(VDPASIM_BLK_CAPACITY << SECTOR_SHIFT, GFP_KERNEL); if (!shared_buffer) { ret = -ENOMEM; -- cgit v1.2.3 From f2de37a572853d340f945a7748f74e3ed8c6b743 Mon Sep 17 00:00:00 2001 From: Björn Töpel Date: Thu, 12 Oct 2023 12:28:52 +0200 Subject: riscv, qemu_fw_cfg: Add support for RISC-V architecture MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Qemu fw_cfg support was missing for RISC-V, which made it hard to do proper vmcore dumps from qemu. Add the missing RISC-V arch-defines. You can now do vmcore dumps from qemu. Add "-device vmcoreinfo" to the qemu command-line. From the qemu monitor: (qemu) dump-guest-memory vmcore The vmcore can now be used, e.g., with the "crash" utility. Acked-by: "Michael S. Tsirkin" Acked-by: Alistair Francis Tested-by: Clément Léger Signed-off-by: Björn Töpel Message-Id: <20231012102852.234442-1-bjorn@kernel.org> Signed-off-by: Michael S. Tsirkin --- drivers/firmware/Kconfig | 2 +- drivers/firmware/qemu_fw_cfg.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/firmware/Kconfig b/drivers/firmware/Kconfig index b59e3041fd62..f05ff56629b3 100644 --- a/drivers/firmware/Kconfig +++ b/drivers/firmware/Kconfig @@ -155,7 +155,7 @@ config RASPBERRYPI_FIRMWARE config FW_CFG_SYSFS tristate "QEMU fw_cfg device support in sysfs" - depends on SYSFS && (ARM || ARM64 || PARISC || PPC_PMAC || SPARC || X86) + depends on SYSFS && (ARM || ARM64 || PARISC || PPC_PMAC || RISCV || SPARC || X86) depends on HAS_IOPORT_MAP default n help diff --git a/drivers/firmware/qemu_fw_cfg.c b/drivers/firmware/qemu_fw_cfg.c index a69399a6b7c0..1448f61173b3 100644 --- a/drivers/firmware/qemu_fw_cfg.c +++ b/drivers/firmware/qemu_fw_cfg.c @@ -211,7 +211,7 @@ static void fw_cfg_io_cleanup(void) /* arch-specific ctrl & data register offsets are not available in ACPI, DT */ #if !(defined(FW_CFG_CTRL_OFF) && defined(FW_CFG_DATA_OFF)) -# if (defined(CONFIG_ARM) || defined(CONFIG_ARM64)) +# if (defined(CONFIG_ARM) || defined(CONFIG_ARM64) || defined(CONFIG_RISCV)) # define FW_CFG_CTRL_OFF 0x08 # define FW_CFG_DATA_OFF 0x00 # define FW_CFG_DMA_OFF 0x10 -- cgit v1.2.3 From b2c8b644fac1087dfe69a1762c04df090178a5ae Mon Sep 17 00:00:00 2001 From: Jakub Sitnicki Date: Wed, 25 Oct 2023 16:53:19 +0200 Subject: virtio_pci: Switch away from deprecated irq_set_affinity_hint Since commit 65c7cdedeb30 ("genirq: Provide new interfaces for affinity hints") irq_set_affinity_hint is being phased out. Switch to new interfaces for setting and applying irq affinity hints. Signed-off-by: Jakub Sitnicki Message-Id: <20231025145319.380775-1-jakub@cloudflare.com> Signed-off-by: Michael S. Tsirkin Reviewed-by: Xuan Zhuo --- drivers/virtio/virtio_pci_common.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/virtio/virtio_pci_common.c b/drivers/virtio/virtio_pci_common.c index c2524a7207cf..7a5593997e0e 100644 --- a/drivers/virtio/virtio_pci_common.c +++ b/drivers/virtio/virtio_pci_common.c @@ -242,7 +242,7 @@ void vp_del_vqs(struct virtio_device *vdev) if (v != VIRTIO_MSI_NO_VECTOR) { int irq = pci_irq_vector(vp_dev->pci_dev, v); - irq_set_affinity_hint(irq, NULL); + irq_update_affinity_hint(irq, NULL); free_irq(irq, vq); } } @@ -443,10 +443,10 @@ int vp_set_vq_affinity(struct virtqueue *vq, const struct cpumask *cpu_mask) mask = vp_dev->msix_affinity_masks[info->msix_vector]; irq = pci_irq_vector(vp_dev->pci_dev, info->msix_vector); if (!cpu_mask) - irq_set_affinity_hint(irq, NULL); + irq_update_affinity_hint(irq, NULL); else { cpumask_copy(mask, cpu_mask); - irq_set_affinity_hint(irq, mask); + irq_set_affinity_and_hint(irq, mask); } } return 0; -- cgit v1.2.3 From e07754e0a1ea2d63fb29574253d1fd7405607343 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Fri, 27 Oct 2023 15:12:54 +0300 Subject: vhost-vdpa: fix use after free in vhost_vdpa_probe() The put_device() calls vhost_vdpa_release_dev() which calls ida_simple_remove() and frees "v". So this call to ida_simple_remove() is a use after free and a double free. Fixes: ebe6a354fa7e ("vhost-vdpa: Call ida_simple_remove() when failed") Signed-off-by: Dan Carpenter Message-Id: Signed-off-by: Michael S. Tsirkin Acked-by: Jason Wang --- drivers/vhost/vdpa.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/vhost/vdpa.c b/drivers/vhost/vdpa.c index 30df5c58db73..da7ec77cdaff 100644 --- a/drivers/vhost/vdpa.c +++ b/drivers/vhost/vdpa.c @@ -1582,7 +1582,6 @@ static int vhost_vdpa_probe(struct vdpa_device *vdpa) err: put_device(&v->dev); - ida_simple_remove(&vhost_vdpa_ida, v->minor); return r; } -- cgit v1.2.3 From 7269cba53d906cf257c139d3b3a53ad272176bca Mon Sep 17 00:00:00 2001 From: Sumit Garg Date: Thu, 2 Nov 2023 13:00:55 +0530 Subject: tee: optee: Fix supplicant based device enumeration Currently supplicant dependent optee device enumeration only registers devices whenever tee-supplicant is invoked for the first time. But it forgets to remove devices when tee-supplicant daemon stops running and closes its context gracefully. This leads to following error for fTPM driver during reboot/shutdown: [ 73.466791] tpm tpm0: ftpm_tee_tpm_op_send: SUBMIT_COMMAND invoke error: 0xffff3024 Fix this by adding an attribute for supplicant dependent devices so that the user-space service can detect and detach supplicant devices before closing the supplicant: $ for dev in /sys/bus/tee/devices/*; do if [[ -f "$dev/need_supplicant" && -f "$dev/driver/unbind" ]]; \ then echo $(basename "$dev") > $dev/driver/unbind; fi done Reported-by: Jan Kiszka Closes: https://github.com/OP-TEE/optee_os/issues/6094 Fixes: 5f178bb71e3a ("optee: enable support for multi-stage bus enumeration") Signed-off-by: Sumit Garg Reviewed-by: Ilias Apalodimas Acked-by: Jerome Forissier [jw: fixed up Date documentation] Signed-off-by: Jens Wiklander --- Documentation/ABI/testing/sysfs-bus-optee-devices | 9 +++++++++ drivers/tee/optee/device.c | 17 +++++++++++++++-- 2 files changed, 24 insertions(+), 2 deletions(-) diff --git a/Documentation/ABI/testing/sysfs-bus-optee-devices b/Documentation/ABI/testing/sysfs-bus-optee-devices index 0f58701367b6..af31e5a22d89 100644 --- a/Documentation/ABI/testing/sysfs-bus-optee-devices +++ b/Documentation/ABI/testing/sysfs-bus-optee-devices @@ -6,3 +6,12 @@ Description: OP-TEE bus provides reference to registered drivers under this directory. The matches Trusted Application (TA) driver and corresponding TA in secure OS. Drivers are free to create needed API under optee-ta- directory. + +What: /sys/bus/tee/devices/optee-ta-/need_supplicant +Date: November 2023 +KernelVersion: 6.7 +Contact: op-tee@lists.trustedfirmware.org +Description: + Allows to distinguish whether an OP-TEE based TA/device requires user-space + tee-supplicant to function properly or not. This attribute will be present for + devices which depend on tee-supplicant to be running. diff --git a/drivers/tee/optee/device.c b/drivers/tee/optee/device.c index 64f0e047c23d..4b1092127694 100644 --- a/drivers/tee/optee/device.c +++ b/drivers/tee/optee/device.c @@ -60,7 +60,16 @@ static void optee_release_device(struct device *dev) kfree(optee_device); } -static int optee_register_device(const uuid_t *device_uuid) +static ssize_t need_supplicant_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + return 0; +} + +static DEVICE_ATTR_RO(need_supplicant); + +static int optee_register_device(const uuid_t *device_uuid, u32 func) { struct tee_client_device *optee_device = NULL; int rc; @@ -83,6 +92,10 @@ static int optee_register_device(const uuid_t *device_uuid) put_device(&optee_device->dev); } + if (func == PTA_CMD_GET_DEVICES_SUPP) + device_create_file(&optee_device->dev, + &dev_attr_need_supplicant); + return rc; } @@ -142,7 +155,7 @@ static int __optee_enumerate_devices(u32 func) num_devices = shm_size / sizeof(uuid_t); for (idx = 0; idx < num_devices; idx++) { - rc = optee_register_device(&device_uuid[idx]); + rc = optee_register_device(&device_uuid[idx], func); if (rc) goto out_shm; } -- cgit v1.2.3 From dec96fc2dcb59723e041416b8dc53e011b4bfc2e Mon Sep 17 00:00:00 2001 From: Filipe Manana Date: Fri, 13 Oct 2023 10:05:48 +0100 Subject: btrfs: use u64 for buffer sizes in the tree search ioctls In the tree search v2 ioctl we use the type size_t, which is an unsigned long, to track the buffer size in the local variable 'buf_size'. An unsigned long is 32 bits wide on a 32 bits architecture. The buffer size defined in struct btrfs_ioctl_search_args_v2 is a u64, so when we later try to copy the local variable 'buf_size' to the argument struct, when the search returns -EOVERFLOW, we copy only 32 bits which will be a problem on big endian systems. Fix this by using a u64 type for the buffer sizes, not only at btrfs_ioctl_tree_search_v2(), but also everywhere down the call chain so that we can use the u64 at btrfs_ioctl_tree_search_v2(). Fixes: cc68a8a5a433 ("btrfs: new ioctl TREE_SEARCH_V2") Reported-by: Dan Carpenter Link: https://lore.kernel.org/linux-btrfs/ce6f4bd6-9453-4ffe-ba00-cee35495e10f@moroto.mountain/ Signed-off-by: Filipe Manana Reviewed-by: David Sterba Signed-off-by: David Sterba --- fs/btrfs/ioctl.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c index 89cd212735ea..f7e94aff41ae 100644 --- a/fs/btrfs/ioctl.c +++ b/fs/btrfs/ioctl.c @@ -1528,7 +1528,7 @@ static noinline int key_in_sk(struct btrfs_key *key, static noinline int copy_to_sk(struct btrfs_path *path, struct btrfs_key *key, struct btrfs_ioctl_search_key *sk, - size_t *buf_size, + u64 *buf_size, char __user *ubuf, unsigned long *sk_offset, int *num_found) @@ -1660,7 +1660,7 @@ out: static noinline int search_ioctl(struct inode *inode, struct btrfs_ioctl_search_key *sk, - size_t *buf_size, + u64 *buf_size, char __user *ubuf) { struct btrfs_fs_info *info = btrfs_sb(inode->i_sb); @@ -1733,7 +1733,7 @@ static noinline int btrfs_ioctl_tree_search(struct inode *inode, struct btrfs_ioctl_search_args __user *uargs = argp; struct btrfs_ioctl_search_key sk; int ret; - size_t buf_size; + u64 buf_size; if (!capable(CAP_SYS_ADMIN)) return -EPERM; @@ -1763,8 +1763,8 @@ static noinline int btrfs_ioctl_tree_search_v2(struct inode *inode, struct btrfs_ioctl_search_args_v2 __user *uarg = argp; struct btrfs_ioctl_search_args_v2 args; int ret; - size_t buf_size; - const size_t buf_limit = SZ_16M; + u64 buf_size; + const u64 buf_limit = SZ_16M; if (!capable(CAP_SYS_ADMIN)) return -EPERM; -- cgit v1.2.3 From b8212814d1e8428a082234223105e4071b844fab Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Thu, 12 Oct 2023 12:42:55 +0300 Subject: btrfs: directly return 0 on no error code in btrfs_insert_raid_extent() It's more obvious to return a literal zero instead of "return ret;". Plus Smatch complains that ret could be uninitialized if the ordered_extent->bioc_list list is empty and this silences that warning. Signed-off-by: Dan Carpenter Reviewed-by: David Sterba Signed-off-by: David Sterba --- fs/btrfs/raid-stripe-tree.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/btrfs/raid-stripe-tree.c b/fs/btrfs/raid-stripe-tree.c index 944e8f1862aa..9589362acfbf 100644 --- a/fs/btrfs/raid-stripe-tree.c +++ b/fs/btrfs/raid-stripe-tree.c @@ -145,7 +145,7 @@ int btrfs_insert_raid_extent(struct btrfs_trans_handle *trans, btrfs_put_bioc(bioc); } - return ret; + return 0; } int btrfs_get_raid_extent_offset(struct btrfs_fs_info *fs_info, -- cgit v1.2.3 From dfcb03ae8a341600d72fbf3c79429f306764d653 Mon Sep 17 00:00:00 2001 From: Naohiro Aota Date: Tue, 17 Oct 2023 16:23:22 +0900 Subject: btrfs: zoned: drop no longer valid write pointer check There is a check of the write pointer vs the zone size to reject an invalid write pointer. However, as of now, we have RAID0/RAID10 on the zoned mode, we can have a block group whose size is larger than the zone size. As an equivalent check against the block group's zone_capacity is already there, we can just drop this invalid check. Fixes: 568220fa9657 ("btrfs: zoned: support RAID0/1/10 on top of raid stripe tree") Reviewed-by: Johannes Thumshirn Signed-off-by: Naohiro Aota Signed-off-by: David Sterba --- fs/btrfs/zoned.c | 7 ------- 1 file changed, 7 deletions(-) diff --git a/fs/btrfs/zoned.c b/fs/btrfs/zoned.c index 3504ade30cb0..188378ca19c7 100644 --- a/fs/btrfs/zoned.c +++ b/fs/btrfs/zoned.c @@ -1661,13 +1661,6 @@ int btrfs_load_block_group_zone_info(struct btrfs_block_group *cache, bool new) } out: - if (cache->alloc_offset > fs_info->zone_size) { - btrfs_err(fs_info, - "zoned: invalid write pointer %llu in block group %llu", - cache->alloc_offset, cache->start); - ret = -EIO; - } - if (cache->alloc_offset > cache->zone_capacity) { btrfs_err(fs_info, "zoned: invalid write pointer %llu (larger than zone capacity %llu) in block group %llu", -- cgit v1.2.3 From 776a838f1fa95670c1c1cf7109a898090b473fa3 Mon Sep 17 00:00:00 2001 From: Naohiro Aota Date: Tue, 17 Oct 2023 17:00:31 +0900 Subject: btrfs: zoned: wait for data BG to be finished on direct IO allocation Running the fio command below on a ZNS device results in "Resource temporarily unavailable" error. $ sudo fio --name=w --directory=/mnt --filesize=1GB --bs=16MB --numjobs=16 \ --rw=write --ioengine=libaio --iodepth=128 --direct=1 fio: io_u error on file /mnt/w.2.0: Resource temporarily unavailable: write offset=117440512, buflen=16777216 fio: io_u error on file /mnt/w.2.0: Resource temporarily unavailable: write offset=134217728, buflen=16777216 ... This happens because -EAGAIN error returned from btrfs_reserve_extent() called from btrfs_new_extent_direct() is spilling over to the userland. btrfs_reserve_extent() returns -EAGAIN when there is no active zone available. Then, the caller should wait for some other on-going IO to finish a zone and retry the allocation. This logic is already implemented for buffered write in cow_file_range(), but it is missing for the direct IO counterpart. Implement the same logic for it. Reported-by: Shinichiro Kawasaki Fixes: 2ce543f47843 ("btrfs: zoned: wait until zone is finished when allocation didn't progress") CC: stable@vger.kernel.org # 6.1+ Tested-by: Shinichiro Kawasaki Reviewed-by: Johannes Thumshirn Signed-off-by: Naohiro Aota Signed-off-by: David Sterba --- fs/btrfs/inode.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index b388505c91cc..137c4824ff91 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -6979,8 +6979,15 @@ static struct extent_map *btrfs_new_extent_direct(struct btrfs_inode *inode, int ret; alloc_hint = get_extent_allocation_hint(inode, start, len); +again: ret = btrfs_reserve_extent(root, len, len, fs_info->sectorsize, 0, alloc_hint, &ins, 1, 1); + if (ret == -EAGAIN) { + ASSERT(btrfs_is_zoned(fs_info)); + wait_on_bit_io(&inode->root->fs_info->flags, BTRFS_FS_NEED_ZONE_FINISH, + TASK_UNINTERRUPTIBLE); + goto again; + } if (ret) return ERR_PTR(ret); -- cgit v1.2.3 From d8ba2a91fc3cd0347823435971f58f473cbba7aa Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Fri, 13 Oct 2023 15:18:17 -0400 Subject: btrfs: get correct owning_root when dropping snapshot Dave reported a bug where we were aborting the transaction while trying to cleanup the squota reservation for an extent. This turned out to be because we're doing btrfs_header_owner(next) in do_walk_down when we decide to free the block. However in this code block we haven't explicitly read next, so it could be stale. We would then get whatever garbage happened to be in the pages at this point. The commit that introduced that is "btrfs: track owning root in btrfs_ref". Fix this by saving the owner_root when we do the btrfs_lookup_extent_info(). We always do this in do_walk_down, it is how we make the decision of whether or not to delete the block. This is cheap because we've already done the extent item lookup at this point, so it's straightforward to just grab the owner root as well. Then we can use this when deleting the metadata block without needing to force a read of the extent buffer to find the owner. This fixes the problem that Dave reported. Reviewed-by: Filipe Manana Signed-off-by: Josef Bacik Signed-off-by: David Sterba --- fs/btrfs/ctree.c | 2 +- fs/btrfs/extent-tree.c | 25 +++++++++++++++++-------- fs/btrfs/extent-tree.h | 3 ++- 3 files changed, 20 insertions(+), 10 deletions(-) diff --git a/fs/btrfs/ctree.c b/fs/btrfs/ctree.c index c0c5f2239820..14cefeaf9622 100644 --- a/fs/btrfs/ctree.c +++ b/fs/btrfs/ctree.c @@ -421,7 +421,7 @@ static noinline int update_ref_for_cow(struct btrfs_trans_handle *trans, if (btrfs_block_can_be_shared(root, buf)) { ret = btrfs_lookup_extent_info(trans, fs_info, buf->start, btrfs_header_level(buf), 1, - &refs, &flags); + &refs, &flags, NULL); if (ret) return ret; if (unlikely(refs == 0)) { diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c index c8e5b4715b49..0455935ff558 100644 --- a/fs/btrfs/extent-tree.c +++ b/fs/btrfs/extent-tree.c @@ -102,7 +102,8 @@ int btrfs_lookup_data_extent(struct btrfs_fs_info *fs_info, u64 start, u64 len) */ int btrfs_lookup_extent_info(struct btrfs_trans_handle *trans, struct btrfs_fs_info *fs_info, u64 bytenr, - u64 offset, int metadata, u64 *refs, u64 *flags) + u64 offset, int metadata, u64 *refs, u64 *flags, + u64 *owning_root) { struct btrfs_root *extent_root; struct btrfs_delayed_ref_head *head; @@ -114,6 +115,7 @@ int btrfs_lookup_extent_info(struct btrfs_trans_handle *trans, u32 item_size; u64 num_refs; u64 extent_flags; + u64 owner = 0; int ret; /* @@ -167,6 +169,8 @@ search_again: struct btrfs_extent_item); num_refs = btrfs_extent_refs(leaf, ei); extent_flags = btrfs_extent_flags(leaf, ei); + owner = btrfs_get_extent_owner_root(fs_info, leaf, + path->slots[0]); } else { ret = -EUCLEAN; btrfs_err(fs_info, @@ -226,6 +230,8 @@ out: *refs = num_refs; if (flags) *flags = extent_flags; + if (owning_root) + *owning_root = owner; out_free: btrfs_free_path(path); return ret; @@ -5234,7 +5240,7 @@ static noinline void reada_walk_down(struct btrfs_trans_handle *trans, /* We don't lock the tree block, it's OK to be racy here */ ret = btrfs_lookup_extent_info(trans, fs_info, bytenr, wc->level - 1, 1, &refs, - &flags); + &flags, NULL); /* We don't care about errors in readahead. */ if (ret < 0) continue; @@ -5301,7 +5307,8 @@ static noinline int walk_down_proc(struct btrfs_trans_handle *trans, ret = btrfs_lookup_extent_info(trans, fs_info, eb->start, level, 1, &wc->refs[level], - &wc->flags[level]); + &wc->flags[level], + NULL); BUG_ON(ret == -ENOMEM); if (ret) return ret; @@ -5391,6 +5398,7 @@ static noinline int do_walk_down(struct btrfs_trans_handle *trans, u64 bytenr; u64 generation; u64 parent; + u64 owner_root = 0; struct btrfs_tree_parent_check check = { 0 }; struct btrfs_key key; struct btrfs_ref ref = { 0 }; @@ -5434,7 +5442,8 @@ static noinline int do_walk_down(struct btrfs_trans_handle *trans, ret = btrfs_lookup_extent_info(trans, fs_info, bytenr, level - 1, 1, &wc->refs[level - 1], - &wc->flags[level - 1]); + &wc->flags[level - 1], + &owner_root); if (ret < 0) goto out_unlock; @@ -5567,8 +5576,7 @@ skip: find_next_key(path, level, &wc->drop_progress); btrfs_init_generic_ref(&ref, BTRFS_DROP_DELAYED_REF, bytenr, - fs_info->nodesize, parent, - btrfs_header_owner(next)); + fs_info->nodesize, parent, owner_root); btrfs_init_tree_ref(&ref, level - 1, root->root_key.objectid, 0, false); ret = btrfs_free_extent(trans, &ref); @@ -5635,7 +5643,8 @@ static noinline int walk_up_proc(struct btrfs_trans_handle *trans, ret = btrfs_lookup_extent_info(trans, fs_info, eb->start, level, 1, &wc->refs[level], - &wc->flags[level]); + &wc->flags[level], + NULL); if (ret < 0) { btrfs_tree_unlock_rw(eb, path->locks[level]); path->locks[level] = 0; @@ -5880,7 +5889,7 @@ int btrfs_drop_snapshot(struct btrfs_root *root, int update_ref, int for_reloc) ret = btrfs_lookup_extent_info(trans, fs_info, path->nodes[level]->start, level, 1, &wc->refs[level], - &wc->flags[level]); + &wc->flags[level], NULL); if (ret < 0) { err = ret; goto out_end_trans; diff --git a/fs/btrfs/extent-tree.h b/fs/btrfs/extent-tree.h index 0716f65d9753..2e066035ccee 100644 --- a/fs/btrfs/extent-tree.h +++ b/fs/btrfs/extent-tree.h @@ -99,7 +99,8 @@ u64 btrfs_cleanup_ref_head_accounting(struct btrfs_fs_info *fs_info, int btrfs_lookup_data_extent(struct btrfs_fs_info *fs_info, u64 start, u64 len); int btrfs_lookup_extent_info(struct btrfs_trans_handle *trans, struct btrfs_fs_info *fs_info, u64 bytenr, - u64 offset, int metadata, u64 *refs, u64 *flags); + u64 offset, int metadata, u64 *refs, u64 *flags, + u64 *owner_root); int btrfs_pin_extent(struct btrfs_trans_handle *trans, u64 bytenr, u64 num, int reserved); int btrfs_pin_extent_for_log_replay(struct btrfs_trans_handle *trans, -- cgit v1.2.3 From 47e2b06b7b5cb356a987ba3429550c3a89ea89d6 Mon Sep 17 00:00:00 2001 From: Qu Wenruo Date: Sat, 28 Oct 2023 13:28:45 +1030 Subject: btrfs: make found_logical_ret parameter mandatory for function queue_scrub_stripe() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit [BUG] There is a compilation warning reported on commit ae76d8e3e135 ("btrfs: scrub: fix grouping of read IO"), where gcc (14.0.0 20231022 experimental) is reporting the following uninitialized variable: fs/btrfs/scrub.c: In function ‘scrub_simple_mirror.isra’: fs/btrfs/scrub.c:2075:29: error: ‘found_logical’ may be used uninitialized [-Werror=maybe-uninitialized[https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wmaybe-uninitialized]] 2075 | cur_logical = found_logical + BTRFS_STRIPE_LEN; fs/btrfs/scrub.c:2040:21: note: ‘found_logical’ was declared here 2040 | u64 found_logical; | ^~~~~~~~~~~~~ [CAUSE] This is a false alert, as @found_logical is passed as parameter @found_logical_ret of function queue_scrub_stripe(). As long as queue_scrub_stripe() returned 0, we would update @found_logical_ret. And if queue_scrub_stripe() returned >0 or <0, the caller would not utilized @found_logical, thus there should be nothing wrong. Although the triggering gcc is still experimental, it looks like the extra check on "if (found_logical_ret)" can sometimes confuse the compiler. Meanwhile the only caller of queue_scrub_stripe() is always passing a valid pointer, there is no need for such check at all. [FIX] Although the report itself is a false alert, we can still make it more explicit by: - Replace the check for @found_logical_ret with ASSERT() - Initialize @found_logical to U64_MAX - Add one extra ASSERT() to make sure @found_logical got updated Link: https://lore.kernel.org/linux-btrfs/87fs1x1p93.fsf@gentoo.org/ Fixes: ae76d8e3e135 ("btrfs: scrub: fix grouping of read IO") Reviewed-by: Anand Jain Signed-off-by: Qu Wenruo Reviewed-by: David Sterba Signed-off-by: David Sterba --- fs/btrfs/scrub.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/fs/btrfs/scrub.c b/fs/btrfs/scrub.c index 9ce5be21b036..f62a408671cb 100644 --- a/fs/btrfs/scrub.c +++ b/fs/btrfs/scrub.c @@ -1868,6 +1868,9 @@ static int queue_scrub_stripe(struct scrub_ctx *sctx, struct btrfs_block_group * */ ASSERT(sctx->cur_stripe < SCRUB_TOTAL_STRIPES); + /* @found_logical_ret must be specified. */ + ASSERT(found_logical_ret); + stripe = &sctx->stripes[sctx->cur_stripe]; scrub_reset_stripe(stripe); ret = scrub_find_fill_first_stripe(bg, &sctx->extent_path, @@ -1876,8 +1879,7 @@ static int queue_scrub_stripe(struct scrub_ctx *sctx, struct btrfs_block_group * /* Either >0 as no more extents or <0 for error. */ if (ret) return ret; - if (found_logical_ret) - *found_logical_ret = stripe->logical; + *found_logical_ret = stripe->logical; sctx->cur_stripe++; /* We filled one group, submit it. */ @@ -2080,7 +2082,7 @@ static int scrub_simple_mirror(struct scrub_ctx *sctx, /* Go through each extent items inside the logical range */ while (cur_logical < logical_end) { - u64 found_logical; + u64 found_logical = U64_MAX; u64 cur_physical = physical + cur_logical - logical_start; /* Canceled? */ @@ -2115,6 +2117,8 @@ static int scrub_simple_mirror(struct scrub_ctx *sctx, if (ret < 0) break; + /* queue_scrub_stripe() returned 0, @found_logical must be updated. */ + ASSERT(found_logical != U64_MAX); cur_logical = found_logical + BTRFS_STRIPE_LEN; /* Don't hold CPU for too long time */ -- cgit v1.2.3 From cd63ffbd23edc176f09cac5c9287db732d7cbb73 Mon Sep 17 00:00:00 2001 From: Filipe Manana Date: Mon, 30 Oct 2023 11:54:23 +0000 Subject: btrfs: fix error pointer dereference after failure to allocate fs devices At device_list_add() we allocate a btrfs_fs_devices structure and then before checking if the allocation failed (pointer is ERR_PTR(-ENOMEM)), we dereference the error pointer in a memcpy() argument if the feature BTRFS_FEATURE_INCOMPAT_METADATA_UUID is enabled. Fix this by checking for an allocation error before trying the memcpy(). Fixes: f7361d8c3fc3 ("btrfs: sipmlify uuid parameters of alloc_fs_devices()") Reviewed-by: Qu Wenruo Reviewed-by: Anand Jain Signed-off-by: Filipe Manana Reviewed-by: David Sterba Signed-off-by: David Sterba --- fs/btrfs/volumes.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c index 1fdfa9153e30..dd279241f78c 100644 --- a/fs/btrfs/volumes.c +++ b/fs/btrfs/volumes.c @@ -746,13 +746,13 @@ static noinline struct btrfs_device *device_list_add(const char *path, if (!fs_devices) { fs_devices = alloc_fs_devices(disk_super->fsid); + if (IS_ERR(fs_devices)) + return ERR_CAST(fs_devices); + if (has_metadata_uuid) memcpy(fs_devices->metadata_uuid, disk_super->metadata_uuid, BTRFS_FSID_SIZE); - if (IS_ERR(fs_devices)) - return ERR_CAST(fs_devices); - if (same_fsid_diff_dev) { generate_random_uuid(fs_devices->fsid); fs_devices->temp_fsid = true; -- cgit v1.2.3 From c692800cb2ef7a4f4940c68d765cd4649aff3e46 Mon Sep 17 00:00:00 2001 From: "Kirill A. Shutemov" Date: Thu, 2 Nov 2023 02:33:14 +0300 Subject: MAINTAINERS: Add Intel TDX entry Add myself as Intel TDX maintainer. I drove upstreaming most of TDX code so far and I will continue working on TDX for foreseeable future. [ dhansen: * Add myself as a reviewer too * Swap Maintained=>Supported. I double checked Kirill is still being paid * Add drivers/virt/coco/tdx-guest ] Suggested-by: Dave Hansen Signed-off-by: Kirill A. Shutemov Signed-off-by: Dave Hansen Acked-by: Dave Hansen Acked-by: Kuppuswamy Sathyanarayanan Acked-by: Kai Huang Link: https://lore.kernel.org/all/20231101233314.2567-1-kirill.shutemov%40linux.intel.com --- MAINTAINERS | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index dd5de540ec0b..b697020eca1c 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -23460,6 +23460,20 @@ F: arch/x86/kernel/dumpstack.c F: arch/x86/kernel/stacktrace.c F: arch/x86/kernel/unwind_*.c +X86 TRUST DOMAIN EXTENSIONS (TDX) +M: Kirill A. Shutemov +R: Dave Hansen +L: x86@kernel.org +L: linux-coco@lists.linux.dev +S: Supported +T: git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git x86/tdx +F: arch/x86/boot/compressed/tdx* +F: arch/x86/coco/tdx/ +F: arch/x86/include/asm/shared/tdx.h +F: arch/x86/include/asm/tdx.h +F: arch/x86/virt/vmx/tdx/ +F: drivers/virt/coco/tdx-guest + X86 VDSO M: Andy Lutomirski L: linux-kernel@vger.kernel.org -- cgit v1.2.3 From d3badb15613c14dd35d3495b1dde5c90fcd616dd Mon Sep 17 00:00:00 2001 From: Fang Xiang Date: Mon, 30 Oct 2023 16:32:56 +0800 Subject: irqchip/gic-v3-its: Flush ITS tables correctly in non-coherent GIC designs In non-coherent GIC designs, the ITS tables must be flushed before writing to the GITS_BASER registers, otherwise the ITS could read dirty tables, which results in unpredictable behavior. Flush the tables right at the begin of its_setup_baser() to prevent that. [ tglx: Massage changelog ] Fixes: a8707f553884 ("irqchip/gic-v3: Add Rockchip 3588001 erratum workaround") Suggested-by: Marc Zyngier Signed-off-by: Fang Xiang Signed-off-by: Thomas Gleixner Reviewed-by: Marc Zyngier Link: https://lore.kernel.org/r/20231030083256.4345-1-fangxiang3@xiaomi.com --- drivers/irqchip/irq-gic-v3-its.c | 16 ++++++++++------ 1 file changed, 10 insertions(+), 6 deletions(-) diff --git a/drivers/irqchip/irq-gic-v3-its.c b/drivers/irqchip/irq-gic-v3-its.c index a8c89df1a997..9a7a74239eab 100644 --- a/drivers/irqchip/irq-gic-v3-its.c +++ b/drivers/irqchip/irq-gic-v3-its.c @@ -2379,12 +2379,12 @@ retry_baser: break; } + if (!shr) + gic_flush_dcache_to_poc(base, PAGE_ORDER_TO_SIZE(order)); + its_write_baser(its, baser, val); tmp = baser->val; - if (its->flags & ITS_FLAGS_FORCE_NON_SHAREABLE) - tmp &= ~GITS_BASER_SHAREABILITY_MASK; - if ((val ^ tmp) & GITS_BASER_SHAREABILITY_MASK) { /* * Shareability didn't stick. Just use @@ -2394,10 +2394,9 @@ retry_baser: * non-cacheable as well. */ shr = tmp & GITS_BASER_SHAREABILITY_MASK; - if (!shr) { + if (!shr) cache = GITS_BASER_nC; - gic_flush_dcache_to_poc(base, PAGE_ORDER_TO_SIZE(order)); - } + goto retry_baser; } @@ -2609,6 +2608,11 @@ static int its_alloc_tables(struct its_node *its) /* erratum 24313: ignore memory access type */ cache = GITS_BASER_nCnB; + if (its->flags & ITS_FLAGS_FORCE_NON_SHAREABLE) { + cache = GITS_BASER_nC; + shr = 0; + } + for (i = 0; i < GITS_BASER_NR_REGS; i++) { struct its_baser *baser = its->tables + i; u64 val = its_read_baser(its, baser); -- cgit v1.2.3 From 18216762bcf618c52b85719d3563243f80e4a2d4 Mon Sep 17 00:00:00 2001 From: Bagas Sanjaya Date: Mon, 6 Nov 2023 17:12:04 +0700 Subject: x86/Documentation: Indent 'note::' directive for protocol version number note The protocol version number note is between the protocol version table and the memory layout section. As such, Sphinx renders the note directive not only on the actual note, but until the end of doc. Indent the directive so that only the actual protocol version number note is rendered as such. Fixes: 2c33c27fd603 ("x86/boot: Introduce kernel_info") Signed-off-by: Bagas Sanjaya Signed-off-by: Ingo Molnar Cc: Jonathan Corbet Link: https://lore.kernel.org/r/20231106101206.76487-2-bagasdotme@gmail.com Signed-off-by: Ingo Molnar --- Documentation/arch/x86/boot.rst | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/arch/x86/boot.rst b/Documentation/arch/x86/boot.rst index f5d2f2414de8..22cc7a040dae 100644 --- a/Documentation/arch/x86/boot.rst +++ b/Documentation/arch/x86/boot.rst @@ -77,7 +77,7 @@ Protocol 2.14 BURNT BY INCORRECT COMMIT Protocol 2.15 (Kernel 5.5) Added the kernel_info and kernel_info.setup_type_max. ============= ============================================================ -.. note:: + .. note:: The protocol version number should be changed only if the setup header is changed. There is no need to update the version number if boot_params or kernel_info are changed. Additionally, it is recommended to use -- cgit v1.2.3 From 258ea41c926b7b3a16d0d7aa210a1401c4a1601b Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 6 Nov 2023 12:06:52 +0100 Subject: Revert "phy: realtek: usb: Add driver for the Realtek SoC USB 3.0 PHY" This reverts commit adda6e82a7de7d6d478f6c8ef127f0ac51c510a1. The recently added Realtek PHY drivers depend on the new port status notification mechanism which was built on the deprecated USB PHY implementation and devicetree binding. Specifically, using these PHYs would require describing the very same PHY using both the generic "phy" property and the deprecated "usb-phy" property which is clearly wrong. We should not be building new functionality on top of the legacy USB PHY implementation even if it is currently stuck in some kind of transitional limbo. Revert the new Realtek PHY drivers for now so that the port status notification interface can be reverted and replaced. Fixes: adda6e82a7de ("phy: realtek: usb: Add driver for the Realtek SoC USB 3.0 PHY") Cc: stable@vger.kernel.org # 6.6 Cc: Stanley Chang Signed-off-by: Johan Hovold Link: https://lore.kernel.org/r/20231106110654.31090-2-johan+linaro@kernel.org Signed-off-by: Greg Kroah-Hartman --- drivers/phy/realtek/Kconfig | 12 - drivers/phy/realtek/Makefile | 1 - drivers/phy/realtek/phy-rtk-usb3.c | 761 ------------------------------------- 3 files changed, 774 deletions(-) delete mode 100644 drivers/phy/realtek/phy-rtk-usb3.c diff --git a/drivers/phy/realtek/Kconfig b/drivers/phy/realtek/Kconfig index 75ac7e7c31ae..745587751070 100644 --- a/drivers/phy/realtek/Kconfig +++ b/drivers/phy/realtek/Kconfig @@ -17,16 +17,4 @@ config PHY_RTK_RTD_USB2PHY DWC3 USB IP. This driver will do the PHY initialization of the parameters. -config PHY_RTK_RTD_USB3PHY - tristate "Realtek RTD USB3 PHY Transceiver Driver" - depends on USB_SUPPORT - select GENERIC_PHY - select USB_PHY - select USB_COMMON - help - Enable this to support Realtek SoC USB3 phy transceiver. - The DHC (digital home center) RTD series SoCs used the Synopsys - DWC3 USB IP. This driver will do the PHY initialization - of the parameters. - endif # ARCH_REALTEK || COMPILE_TEST diff --git a/drivers/phy/realtek/Makefile b/drivers/phy/realtek/Makefile index ed7b47ff8a26..cf5d440841a2 100644 --- a/drivers/phy/realtek/Makefile +++ b/drivers/phy/realtek/Makefile @@ -1,3 +1,2 @@ # SPDX-License-Identifier: GPL-2.0 obj-$(CONFIG_PHY_RTK_RTD_USB2PHY) += phy-rtk-usb2.o -obj-$(CONFIG_PHY_RTK_RTD_USB3PHY) += phy-rtk-usb3.o diff --git a/drivers/phy/realtek/phy-rtk-usb3.c b/drivers/phy/realtek/phy-rtk-usb3.c deleted file mode 100644 index 67446a85e968..000000000000 --- a/drivers/phy/realtek/phy-rtk-usb3.c +++ /dev/null @@ -1,761 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * phy-rtk-usb3.c RTK usb3.0 phy driver - * - * copyright (c) 2023 realtek semiconductor corporation - * - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#define USB_MDIO_CTRL_PHY_BUSY BIT(7) -#define USB_MDIO_CTRL_PHY_WRITE BIT(0) -#define USB_MDIO_CTRL_PHY_ADDR_SHIFT 8 -#define USB_MDIO_CTRL_PHY_DATA_SHIFT 16 - -#define MAX_USB_PHY_DATA_SIZE 0x30 -#define PHY_ADDR_0X09 0x09 -#define PHY_ADDR_0X0B 0x0b -#define PHY_ADDR_0X0D 0x0d -#define PHY_ADDR_0X10 0x10 -#define PHY_ADDR_0X1F 0x1f -#define PHY_ADDR_0X20 0x20 -#define PHY_ADDR_0X21 0x21 -#define PHY_ADDR_0X30 0x30 - -#define REG_0X09_FORCE_CALIBRATION BIT(9) -#define REG_0X0B_RX_OFFSET_RANGE_MASK 0xc -#define REG_0X0D_RX_DEBUG_TEST_EN BIT(6) -#define REG_0X10_DEBUG_MODE_SETTING 0x3c0 -#define REG_0X10_DEBUG_MODE_SETTING_MASK 0x3f8 -#define REG_0X1F_RX_OFFSET_CODE_MASK 0x1e - -#define USB_U3_TX_LFPS_SWING_TRIM_SHIFT 4 -#define USB_U3_TX_LFPS_SWING_TRIM_MASK 0xf -#define AMPLITUDE_CONTROL_COARSE_MASK 0xff -#define AMPLITUDE_CONTROL_FINE_MASK 0xffff -#define AMPLITUDE_CONTROL_COARSE_DEFAULT 0xff -#define AMPLITUDE_CONTROL_FINE_DEFAULT 0xffff - -#define PHY_ADDR_MAP_ARRAY_INDEX(addr) (addr) -#define ARRAY_INDEX_MAP_PHY_ADDR(index) (index) - -struct phy_reg { - void __iomem *reg_mdio_ctl; -}; - -struct phy_data { - u8 addr; - u16 data; -}; - -struct phy_cfg { - int param_size; - struct phy_data param[MAX_USB_PHY_DATA_SIZE]; - - bool check_efuse; - bool do_toggle; - bool do_toggle_once; - bool use_default_parameter; - bool check_rx_front_end_offset; -}; - -struct phy_parameter { - struct phy_reg phy_reg; - - /* Get from efuse */ - u8 efuse_usb_u3_tx_lfps_swing_trim; - - /* Get from dts */ - u32 amplitude_control_coarse; - u32 amplitude_control_fine; -}; - -struct rtk_phy { - struct usb_phy phy; - struct device *dev; - - struct phy_cfg *phy_cfg; - int num_phy; - struct phy_parameter *phy_parameter; - - struct dentry *debug_dir; -}; - -#define PHY_IO_TIMEOUT_USEC (50000) -#define PHY_IO_DELAY_US (100) - -static inline int utmi_wait_register(void __iomem *reg, u32 mask, u32 result) -{ - int ret; - unsigned int val; - - ret = read_poll_timeout(readl, val, ((val & mask) == result), - PHY_IO_DELAY_US, PHY_IO_TIMEOUT_USEC, false, reg); - if (ret) { - pr_err("%s can't program USB phy\n", __func__); - return -ETIMEDOUT; - } - - return 0; -} - -static int rtk_phy3_wait_vbusy(struct phy_reg *phy_reg) -{ - return utmi_wait_register(phy_reg->reg_mdio_ctl, USB_MDIO_CTRL_PHY_BUSY, 0); -} - -static u16 rtk_phy_read(struct phy_reg *phy_reg, char addr) -{ - unsigned int tmp; - u32 value; - - tmp = (addr << USB_MDIO_CTRL_PHY_ADDR_SHIFT); - - writel(tmp, phy_reg->reg_mdio_ctl); - - rtk_phy3_wait_vbusy(phy_reg); - - value = readl(phy_reg->reg_mdio_ctl); - value = value >> USB_MDIO_CTRL_PHY_DATA_SHIFT; - - return (u16)value; -} - -static int rtk_phy_write(struct phy_reg *phy_reg, char addr, u16 data) -{ - unsigned int val; - - val = USB_MDIO_CTRL_PHY_WRITE | - (addr << USB_MDIO_CTRL_PHY_ADDR_SHIFT) | - (data << USB_MDIO_CTRL_PHY_DATA_SHIFT); - - writel(val, phy_reg->reg_mdio_ctl); - - rtk_phy3_wait_vbusy(phy_reg); - - return 0; -} - -static void do_rtk_usb3_phy_toggle(struct rtk_phy *rtk_phy, int index, bool connect) -{ - struct phy_cfg *phy_cfg = rtk_phy->phy_cfg; - struct phy_reg *phy_reg; - struct phy_parameter *phy_parameter; - struct phy_data *phy_data; - u8 addr; - u16 data; - int i; - - phy_parameter = &((struct phy_parameter *)rtk_phy->phy_parameter)[index]; - phy_reg = &phy_parameter->phy_reg; - - if (!phy_cfg->do_toggle) - return; - - i = PHY_ADDR_MAP_ARRAY_INDEX(PHY_ADDR_0X09); - phy_data = phy_cfg->param + i; - addr = phy_data->addr; - data = phy_data->data; - - if (!addr && !data) { - addr = PHY_ADDR_0X09; - data = rtk_phy_read(phy_reg, addr); - phy_data->addr = addr; - phy_data->data = data; - } - - rtk_phy_write(phy_reg, addr, data & (~REG_0X09_FORCE_CALIBRATION)); - mdelay(1); - rtk_phy_write(phy_reg, addr, data | REG_0X09_FORCE_CALIBRATION); -} - -static int do_rtk_phy_init(struct rtk_phy *rtk_phy, int index) -{ - struct phy_cfg *phy_cfg; - struct phy_reg *phy_reg; - struct phy_parameter *phy_parameter; - int i = 0; - - phy_cfg = rtk_phy->phy_cfg; - phy_parameter = &((struct phy_parameter *)rtk_phy->phy_parameter)[index]; - phy_reg = &phy_parameter->phy_reg; - - if (phy_cfg->use_default_parameter) - goto do_toggle; - - for (i = 0; i < phy_cfg->param_size; i++) { - struct phy_data *phy_data = phy_cfg->param + i; - u8 addr = phy_data->addr; - u16 data = phy_data->data; - - if (!addr && !data) - continue; - - rtk_phy_write(phy_reg, addr, data); - } - -do_toggle: - if (phy_cfg->do_toggle_once) - phy_cfg->do_toggle = true; - - do_rtk_usb3_phy_toggle(rtk_phy, index, false); - - if (phy_cfg->do_toggle_once) { - u16 check_value = 0; - int count = 10; - u16 value_0x0d, value_0x10; - - /* Enable Debug mode by set 0x0D and 0x10 */ - value_0x0d = rtk_phy_read(phy_reg, PHY_ADDR_0X0D); - value_0x10 = rtk_phy_read(phy_reg, PHY_ADDR_0X10); - - rtk_phy_write(phy_reg, PHY_ADDR_0X0D, - value_0x0d | REG_0X0D_RX_DEBUG_TEST_EN); - rtk_phy_write(phy_reg, PHY_ADDR_0X10, - (value_0x10 & ~REG_0X10_DEBUG_MODE_SETTING_MASK) | - REG_0X10_DEBUG_MODE_SETTING); - - check_value = rtk_phy_read(phy_reg, PHY_ADDR_0X30); - - while (!(check_value & BIT(15))) { - check_value = rtk_phy_read(phy_reg, PHY_ADDR_0X30); - mdelay(1); - if (count-- < 0) - break; - } - - if (!(check_value & BIT(15))) - dev_info(rtk_phy->dev, "toggle fail addr=0x%02x, data=0x%04x\n", - PHY_ADDR_0X30, check_value); - - /* Disable Debug mode by set 0x0D and 0x10 to default*/ - rtk_phy_write(phy_reg, PHY_ADDR_0X0D, value_0x0d); - rtk_phy_write(phy_reg, PHY_ADDR_0X10, value_0x10); - - phy_cfg->do_toggle = false; - } - - if (phy_cfg->check_rx_front_end_offset) { - u16 rx_offset_code, rx_offset_range; - u16 code_mask = REG_0X1F_RX_OFFSET_CODE_MASK; - u16 range_mask = REG_0X0B_RX_OFFSET_RANGE_MASK; - bool do_update = false; - - rx_offset_code = rtk_phy_read(phy_reg, PHY_ADDR_0X1F); - if (((rx_offset_code & code_mask) == 0x0) || - ((rx_offset_code & code_mask) == code_mask)) - do_update = true; - - rx_offset_range = rtk_phy_read(phy_reg, PHY_ADDR_0X0B); - if (((rx_offset_range & range_mask) == range_mask) && do_update) { - dev_warn(rtk_phy->dev, "Don't update rx_offset_range (rx_offset_code=0x%x, rx_offset_range=0x%x)\n", - rx_offset_code, rx_offset_range); - do_update = false; - } - - if (do_update) { - u16 tmp1, tmp2; - - tmp1 = rx_offset_range & (~range_mask); - tmp2 = rx_offset_range & range_mask; - tmp2 += (1 << 2); - rx_offset_range = tmp1 | (tmp2 & range_mask); - rtk_phy_write(phy_reg, PHY_ADDR_0X0B, rx_offset_range); - goto do_toggle; - } - } - - return 0; -} - -static int rtk_phy_init(struct phy *phy) -{ - struct rtk_phy *rtk_phy = phy_get_drvdata(phy); - int ret = 0; - int i; - unsigned long phy_init_time = jiffies; - - for (i = 0; i < rtk_phy->num_phy; i++) - ret = do_rtk_phy_init(rtk_phy, i); - - dev_dbg(rtk_phy->dev, "Initialized RTK USB 3.0 PHY (take %dms)\n", - jiffies_to_msecs(jiffies - phy_init_time)); - - return ret; -} - -static int rtk_phy_exit(struct phy *phy) -{ - return 0; -} - -static const struct phy_ops ops = { - .init = rtk_phy_init, - .exit = rtk_phy_exit, - .owner = THIS_MODULE, -}; - -static void rtk_phy_toggle(struct usb_phy *usb3_phy, bool connect, int port) -{ - int index = port; - struct rtk_phy *rtk_phy = NULL; - - rtk_phy = dev_get_drvdata(usb3_phy->dev); - - if (index > rtk_phy->num_phy) { - dev_err(rtk_phy->dev, "%s: The port=%d is not in usb phy (num_phy=%d)\n", - __func__, index, rtk_phy->num_phy); - return; - } - - do_rtk_usb3_phy_toggle(rtk_phy, index, connect); -} - -static int rtk_phy_notify_port_status(struct usb_phy *x, int port, - u16 portstatus, u16 portchange) -{ - bool connect = false; - - pr_debug("%s port=%d portstatus=0x%x portchange=0x%x\n", - __func__, port, (int)portstatus, (int)portchange); - if (portstatus & USB_PORT_STAT_CONNECTION) - connect = true; - - if (portchange & USB_PORT_STAT_C_CONNECTION) - rtk_phy_toggle(x, connect, port); - - return 0; -} - -#ifdef CONFIG_DEBUG_FS -static struct dentry *create_phy_debug_root(void) -{ - struct dentry *phy_debug_root; - - phy_debug_root = debugfs_lookup("phy", usb_debug_root); - if (!phy_debug_root) - phy_debug_root = debugfs_create_dir("phy", usb_debug_root); - - return phy_debug_root; -} - -static int rtk_usb3_parameter_show(struct seq_file *s, void *unused) -{ - struct rtk_phy *rtk_phy = s->private; - struct phy_cfg *phy_cfg; - int i, index; - - phy_cfg = rtk_phy->phy_cfg; - - seq_puts(s, "Property:\n"); - seq_printf(s, " check_efuse: %s\n", - phy_cfg->check_efuse ? "Enable" : "Disable"); - seq_printf(s, " do_toggle: %s\n", - phy_cfg->do_toggle ? "Enable" : "Disable"); - seq_printf(s, " do_toggle_once: %s\n", - phy_cfg->do_toggle_once ? "Enable" : "Disable"); - seq_printf(s, " use_default_parameter: %s\n", - phy_cfg->use_default_parameter ? "Enable" : "Disable"); - - for (index = 0; index < rtk_phy->num_phy; index++) { - struct phy_reg *phy_reg; - struct phy_parameter *phy_parameter; - - phy_parameter = &((struct phy_parameter *)rtk_phy->phy_parameter)[index]; - phy_reg = &phy_parameter->phy_reg; - - seq_printf(s, "PHY %d:\n", index); - - for (i = 0; i < phy_cfg->param_size; i++) { - struct phy_data *phy_data = phy_cfg->param + i; - u8 addr = ARRAY_INDEX_MAP_PHY_ADDR(i); - u16 data = phy_data->data; - - if (!phy_data->addr && !data) - seq_printf(s, " addr = 0x%02x, data = none ==> read value = 0x%04x\n", - addr, rtk_phy_read(phy_reg, addr)); - else - seq_printf(s, " addr = 0x%02x, data = 0x%04x ==> read value = 0x%04x\n", - addr, data, rtk_phy_read(phy_reg, addr)); - } - - seq_puts(s, "PHY Property:\n"); - seq_printf(s, " efuse_usb_u3_tx_lfps_swing_trim: 0x%x\n", - (int)phy_parameter->efuse_usb_u3_tx_lfps_swing_trim); - seq_printf(s, " amplitude_control_coarse: 0x%x\n", - (int)phy_parameter->amplitude_control_coarse); - seq_printf(s, " amplitude_control_fine: 0x%x\n", - (int)phy_parameter->amplitude_control_fine); - } - - return 0; -} -DEFINE_SHOW_ATTRIBUTE(rtk_usb3_parameter); - -static inline void create_debug_files(struct rtk_phy *rtk_phy) -{ - struct dentry *phy_debug_root = NULL; - - phy_debug_root = create_phy_debug_root(); - - if (!phy_debug_root) - return; - - rtk_phy->debug_dir = debugfs_create_dir(dev_name(rtk_phy->dev), phy_debug_root); - - debugfs_create_file("parameter", 0444, rtk_phy->debug_dir, rtk_phy, - &rtk_usb3_parameter_fops); - - return; -} - -static inline void remove_debug_files(struct rtk_phy *rtk_phy) -{ - debugfs_remove_recursive(rtk_phy->debug_dir); -} -#else -static inline void create_debug_files(struct rtk_phy *rtk_phy) { } -static inline void remove_debug_files(struct rtk_phy *rtk_phy) { } -#endif /* CONFIG_DEBUG_FS */ - -static int get_phy_data_by_efuse(struct rtk_phy *rtk_phy, - struct phy_parameter *phy_parameter, int index) -{ - struct phy_cfg *phy_cfg = rtk_phy->phy_cfg; - u8 value = 0; - struct nvmem_cell *cell; - - if (!phy_cfg->check_efuse) - goto out; - - cell = nvmem_cell_get(rtk_phy->dev, "usb_u3_tx_lfps_swing_trim"); - if (IS_ERR(cell)) { - dev_dbg(rtk_phy->dev, "%s no usb_u3_tx_lfps_swing_trim: %ld\n", - __func__, PTR_ERR(cell)); - } else { - unsigned char *buf; - size_t buf_size; - - buf = nvmem_cell_read(cell, &buf_size); - if (!IS_ERR(buf)) { - value = buf[0] & USB_U3_TX_LFPS_SWING_TRIM_MASK; - kfree(buf); - } - nvmem_cell_put(cell); - } - - if (value > 0 && value < 0x8) - phy_parameter->efuse_usb_u3_tx_lfps_swing_trim = 0x8; - else - phy_parameter->efuse_usb_u3_tx_lfps_swing_trim = (u8)value; - -out: - return 0; -} - -static void update_amplitude_control_value(struct rtk_phy *rtk_phy, - struct phy_parameter *phy_parameter) -{ - struct phy_cfg *phy_cfg; - struct phy_reg *phy_reg; - - phy_reg = &phy_parameter->phy_reg; - phy_cfg = rtk_phy->phy_cfg; - - if (phy_parameter->amplitude_control_coarse != AMPLITUDE_CONTROL_COARSE_DEFAULT) { - u16 val_mask = AMPLITUDE_CONTROL_COARSE_MASK; - u16 data; - - if (!phy_cfg->param[PHY_ADDR_0X20].addr && !phy_cfg->param[PHY_ADDR_0X20].data) { - phy_cfg->param[PHY_ADDR_0X20].addr = PHY_ADDR_0X20; - data = rtk_phy_read(phy_reg, PHY_ADDR_0X20); - } else { - data = phy_cfg->param[PHY_ADDR_0X20].data; - } - - data &= (~val_mask); - data |= (phy_parameter->amplitude_control_coarse & val_mask); - - phy_cfg->param[PHY_ADDR_0X20].data = data; - } - - if (phy_parameter->efuse_usb_u3_tx_lfps_swing_trim) { - u8 efuse_val = phy_parameter->efuse_usb_u3_tx_lfps_swing_trim; - u16 val_mask = USB_U3_TX_LFPS_SWING_TRIM_MASK; - int val_shift = USB_U3_TX_LFPS_SWING_TRIM_SHIFT; - u16 data; - - if (!phy_cfg->param[PHY_ADDR_0X20].addr && !phy_cfg->param[PHY_ADDR_0X20].data) { - phy_cfg->param[PHY_ADDR_0X20].addr = PHY_ADDR_0X20; - data = rtk_phy_read(phy_reg, PHY_ADDR_0X20); - } else { - data = phy_cfg->param[PHY_ADDR_0X20].data; - } - - data &= ~(val_mask << val_shift); - data |= ((efuse_val & val_mask) << val_shift); - - phy_cfg->param[PHY_ADDR_0X20].data = data; - } - - if (phy_parameter->amplitude_control_fine != AMPLITUDE_CONTROL_FINE_DEFAULT) { - u16 val_mask = AMPLITUDE_CONTROL_FINE_MASK; - - if (!phy_cfg->param[PHY_ADDR_0X21].addr && !phy_cfg->param[PHY_ADDR_0X21].data) - phy_cfg->param[PHY_ADDR_0X21].addr = PHY_ADDR_0X21; - - phy_cfg->param[PHY_ADDR_0X21].data = - phy_parameter->amplitude_control_fine & val_mask; - } -} - -static int parse_phy_data(struct rtk_phy *rtk_phy) -{ - struct device *dev = rtk_phy->dev; - struct phy_parameter *phy_parameter; - int ret = 0; - int index; - - rtk_phy->phy_parameter = devm_kzalloc(dev, sizeof(struct phy_parameter) * - rtk_phy->num_phy, GFP_KERNEL); - if (!rtk_phy->phy_parameter) - return -ENOMEM; - - for (index = 0; index < rtk_phy->num_phy; index++) { - phy_parameter = &((struct phy_parameter *)rtk_phy->phy_parameter)[index]; - - phy_parameter->phy_reg.reg_mdio_ctl = of_iomap(dev->of_node, 0) + index; - - /* Amplitude control address 0x20 bit 0 to bit 7 */ - if (of_property_read_u32(dev->of_node, "realtek,amplitude-control-coarse-tuning", - &phy_parameter->amplitude_control_coarse)) - phy_parameter->amplitude_control_coarse = AMPLITUDE_CONTROL_COARSE_DEFAULT; - - /* Amplitude control address 0x21 bit 0 to bit 16 */ - if (of_property_read_u32(dev->of_node, "realtek,amplitude-control-fine-tuning", - &phy_parameter->amplitude_control_fine)) - phy_parameter->amplitude_control_fine = AMPLITUDE_CONTROL_FINE_DEFAULT; - - get_phy_data_by_efuse(rtk_phy, phy_parameter, index); - - update_amplitude_control_value(rtk_phy, phy_parameter); - } - - return ret; -} - -static int rtk_usb3phy_probe(struct platform_device *pdev) -{ - struct rtk_phy *rtk_phy; - struct device *dev = &pdev->dev; - struct phy *generic_phy; - struct phy_provider *phy_provider; - const struct phy_cfg *phy_cfg; - int ret; - - phy_cfg = of_device_get_match_data(dev); - if (!phy_cfg) { - dev_err(dev, "phy config are not assigned!\n"); - return -EINVAL; - } - - rtk_phy = devm_kzalloc(dev, sizeof(*rtk_phy), GFP_KERNEL); - if (!rtk_phy) - return -ENOMEM; - - rtk_phy->dev = &pdev->dev; - rtk_phy->phy.dev = rtk_phy->dev; - rtk_phy->phy.label = "rtk-usb3phy"; - rtk_phy->phy.notify_port_status = rtk_phy_notify_port_status; - - rtk_phy->phy_cfg = devm_kzalloc(dev, sizeof(*phy_cfg), GFP_KERNEL); - - memcpy(rtk_phy->phy_cfg, phy_cfg, sizeof(*phy_cfg)); - - rtk_phy->num_phy = 1; - - ret = parse_phy_data(rtk_phy); - if (ret) - goto err; - - platform_set_drvdata(pdev, rtk_phy); - - generic_phy = devm_phy_create(rtk_phy->dev, NULL, &ops); - if (IS_ERR(generic_phy)) - return PTR_ERR(generic_phy); - - phy_set_drvdata(generic_phy, rtk_phy); - - phy_provider = devm_of_phy_provider_register(rtk_phy->dev, of_phy_simple_xlate); - if (IS_ERR(phy_provider)) - return PTR_ERR(phy_provider); - - ret = usb_add_phy_dev(&rtk_phy->phy); - if (ret) - goto err; - - create_debug_files(rtk_phy); - -err: - return ret; -} - -static void rtk_usb3phy_remove(struct platform_device *pdev) -{ - struct rtk_phy *rtk_phy = platform_get_drvdata(pdev); - - remove_debug_files(rtk_phy); - - usb_remove_phy(&rtk_phy->phy); -} - -static const struct phy_cfg rtd1295_phy_cfg = { - .param_size = MAX_USB_PHY_DATA_SIZE, - .param = { [0] = {0x01, 0x4008}, [1] = {0x01, 0xe046}, - [2] = {0x02, 0x6046}, [3] = {0x03, 0x2779}, - [4] = {0x04, 0x72f5}, [5] = {0x05, 0x2ad3}, - [6] = {0x06, 0x000e}, [7] = {0x07, 0x2e00}, - [8] = {0x08, 0x3591}, [9] = {0x09, 0x525c}, - [10] = {0x0a, 0xa600}, [11] = {0x0b, 0xa904}, - [12] = {0x0c, 0xc000}, [13] = {0x0d, 0xef1c}, - [14] = {0x0e, 0x2000}, [15] = {0x0f, 0x0000}, - [16] = {0x10, 0x000c}, [17] = {0x11, 0x4c00}, - [18] = {0x12, 0xfc00}, [19] = {0x13, 0x0c81}, - [20] = {0x14, 0xde01}, [21] = {0x15, 0x0000}, - [22] = {0x16, 0x0000}, [23] = {0x17, 0x0000}, - [24] = {0x18, 0x0000}, [25] = {0x19, 0x4004}, - [26] = {0x1a, 0x1260}, [27] = {0x1b, 0xff00}, - [28] = {0x1c, 0xcb00}, [29] = {0x1d, 0xa03f}, - [30] = {0x1e, 0xc2e0}, [31] = {0x1f, 0x2807}, - [32] = {0x20, 0x947a}, [33] = {0x21, 0x88aa}, - [34] = {0x22, 0x0057}, [35] = {0x23, 0xab66}, - [36] = {0x24, 0x0800}, [37] = {0x25, 0x0000}, - [38] = {0x26, 0x040a}, [39] = {0x27, 0x01d6}, - [40] = {0x28, 0xf8c2}, [41] = {0x29, 0x3080}, - [42] = {0x2a, 0x3082}, [43] = {0x2b, 0x2078}, - [44] = {0x2c, 0xffff}, [45] = {0x2d, 0xffff}, - [46] = {0x2e, 0x0000}, [47] = {0x2f, 0x0040}, }, - .check_efuse = false, - .do_toggle = true, - .do_toggle_once = false, - .use_default_parameter = false, - .check_rx_front_end_offset = false, -}; - -static const struct phy_cfg rtd1619_phy_cfg = { - .param_size = MAX_USB_PHY_DATA_SIZE, - .param = { [8] = {0x08, 0x3591}, - [38] = {0x26, 0x840b}, - [40] = {0x28, 0xf842}, }, - .check_efuse = false, - .do_toggle = true, - .do_toggle_once = false, - .use_default_parameter = false, - .check_rx_front_end_offset = false, -}; - -static const struct phy_cfg rtd1319_phy_cfg = { - .param_size = MAX_USB_PHY_DATA_SIZE, - .param = { [1] = {0x01, 0xac86}, - [6] = {0x06, 0x0003}, - [9] = {0x09, 0x924c}, - [10] = {0x0a, 0xa608}, - [11] = {0x0b, 0xb905}, - [14] = {0x0e, 0x2010}, - [32] = {0x20, 0x705a}, - [33] = {0x21, 0xf645}, - [34] = {0x22, 0x0013}, - [35] = {0x23, 0xcb66}, - [41] = {0x29, 0xff00}, }, - .check_efuse = true, - .do_toggle = true, - .do_toggle_once = false, - .use_default_parameter = false, - .check_rx_front_end_offset = false, -}; - -static const struct phy_cfg rtd1619b_phy_cfg = { - .param_size = MAX_USB_PHY_DATA_SIZE, - .param = { [1] = {0x01, 0xac8c}, - [6] = {0x06, 0x0017}, - [9] = {0x09, 0x724c}, - [10] = {0x0a, 0xb610}, - [11] = {0x0b, 0xb90d}, - [13] = {0x0d, 0xef2a}, - [15] = {0x0f, 0x9050}, - [16] = {0x10, 0x000c}, - [32] = {0x20, 0x70ff}, - [34] = {0x22, 0x0013}, - [35] = {0x23, 0xdb66}, - [38] = {0x26, 0x8609}, - [41] = {0x29, 0xff13}, - [42] = {0x2a, 0x3070}, }, - .check_efuse = true, - .do_toggle = false, - .do_toggle_once = true, - .use_default_parameter = false, - .check_rx_front_end_offset = false, -}; - -static const struct phy_cfg rtd1319d_phy_cfg = { - .param_size = MAX_USB_PHY_DATA_SIZE, - .param = { [1] = {0x01, 0xac89}, - [4] = {0x04, 0xf2f5}, - [6] = {0x06, 0x0017}, - [9] = {0x09, 0x424c}, - [10] = {0x0a, 0x9610}, - [11] = {0x0b, 0x9901}, - [12] = {0x0c, 0xf000}, - [13] = {0x0d, 0xef2a}, - [14] = {0x0e, 0x1000}, - [15] = {0x0f, 0x9050}, - [32] = {0x20, 0x7077}, - [35] = {0x23, 0x0b62}, - [37] = {0x25, 0x10ec}, - [42] = {0x2a, 0x3070}, }, - .check_efuse = true, - .do_toggle = false, - .do_toggle_once = true, - .use_default_parameter = false, - .check_rx_front_end_offset = true, -}; - -static const struct of_device_id usbphy_rtk_dt_match[] = { - { .compatible = "realtek,rtd1295-usb3phy", .data = &rtd1295_phy_cfg }, - { .compatible = "realtek,rtd1319-usb3phy", .data = &rtd1319_phy_cfg }, - { .compatible = "realtek,rtd1319d-usb3phy", .data = &rtd1319d_phy_cfg }, - { .compatible = "realtek,rtd1619-usb3phy", .data = &rtd1619_phy_cfg }, - { .compatible = "realtek,rtd1619b-usb3phy", .data = &rtd1619b_phy_cfg }, - {}, -}; -MODULE_DEVICE_TABLE(of, usbphy_rtk_dt_match); - -static struct platform_driver rtk_usb3phy_driver = { - .probe = rtk_usb3phy_probe, - .remove_new = rtk_usb3phy_remove, - .driver = { - .name = "rtk-usb3phy", - .of_match_table = usbphy_rtk_dt_match, - }, -}; - -module_platform_driver(rtk_usb3phy_driver); - -MODULE_LICENSE("GPL"); -MODULE_ALIAS("platform: rtk-usb3phy"); -MODULE_AUTHOR("Stanley Chang "); -MODULE_DESCRIPTION("Realtek usb 3.0 phy driver"); -- cgit v1.2.3 From 7a784bcdd7e54f0599da3b2360e472238412623e Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 6 Nov 2023 12:06:53 +0100 Subject: Revert "phy: realtek: usb: Add driver for the Realtek SoC USB 2.0 PHY" This reverts commit 134e6d25f6bd06071e5aac0a7eefcea6f7713955. The recently added Realtek PHY drivers depend on the new port status notification mechanism which was built on the deprecated USB PHY implementation and devicetree binding. Specifically, using these PHYs would require describing the very same PHY using both the generic "phy" property and the deprecated "usb-phy" property which is clearly wrong. We should not be building new functionality on top of the legacy USB PHY implementation even if it is currently stuck in some kind of transitional limbo. Revert the new Realtek PHY drivers for now so that the port status notification interface can be reverted and replaced. Fixes: 134e6d25f6bd ("phy: realtek: usb: Add driver for the Realtek SoC USB 2.0 PHY") Cc: stable@vger.kernel.org # 6.6 Cc: Stanley Chang Signed-off-by: Johan Hovold Link: https://lore.kernel.org/r/20231106110654.31090-3-johan+linaro@kernel.org Signed-off-by: Greg Kroah-Hartman --- drivers/phy/Kconfig | 1 - drivers/phy/Makefile | 1 - drivers/phy/realtek/Kconfig | 20 - drivers/phy/realtek/Makefile | 2 - drivers/phy/realtek/phy-rtk-usb2.c | 1325 ------------------------------------ 5 files changed, 1349 deletions(-) delete mode 100644 drivers/phy/realtek/Kconfig delete mode 100644 drivers/phy/realtek/Makefile delete mode 100644 drivers/phy/realtek/phy-rtk-usb2.c diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig index 787354b849c7..4cef568231bf 100644 --- a/drivers/phy/Kconfig +++ b/drivers/phy/Kconfig @@ -87,7 +87,6 @@ source "drivers/phy/motorola/Kconfig" source "drivers/phy/mscc/Kconfig" source "drivers/phy/qualcomm/Kconfig" source "drivers/phy/ralink/Kconfig" -source "drivers/phy/realtek/Kconfig" source "drivers/phy/renesas/Kconfig" source "drivers/phy/rockchip/Kconfig" source "drivers/phy/samsung/Kconfig" diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile index 868a220ed0f6..fb3dc9de6111 100644 --- a/drivers/phy/Makefile +++ b/drivers/phy/Makefile @@ -26,7 +26,6 @@ obj-y += allwinner/ \ mscc/ \ qualcomm/ \ ralink/ \ - realtek/ \ renesas/ \ rockchip/ \ samsung/ \ diff --git a/drivers/phy/realtek/Kconfig b/drivers/phy/realtek/Kconfig deleted file mode 100644 index 745587751070..000000000000 --- a/drivers/phy/realtek/Kconfig +++ /dev/null @@ -1,20 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -# -# Phy drivers for Realtek platforms -# - -if ARCH_REALTEK || COMPILE_TEST - -config PHY_RTK_RTD_USB2PHY - tristate "Realtek RTD USB2 PHY Transceiver Driver" - depends on USB_SUPPORT - select GENERIC_PHY - select USB_PHY - select USB_COMMON - help - Enable this to support Realtek SoC USB2 phy transceiver. - The DHC (digital home center) RTD series SoCs used the Synopsys - DWC3 USB IP. This driver will do the PHY initialization - of the parameters. - -endif # ARCH_REALTEK || COMPILE_TEST diff --git a/drivers/phy/realtek/Makefile b/drivers/phy/realtek/Makefile deleted file mode 100644 index cf5d440841a2..000000000000 --- a/drivers/phy/realtek/Makefile +++ /dev/null @@ -1,2 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -obj-$(CONFIG_PHY_RTK_RTD_USB2PHY) += phy-rtk-usb2.o diff --git a/drivers/phy/realtek/phy-rtk-usb2.c b/drivers/phy/realtek/phy-rtk-usb2.c deleted file mode 100644 index 0a6426285c67..000000000000 --- a/drivers/phy/realtek/phy-rtk-usb2.c +++ /dev/null @@ -1,1325 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * phy-rtk-usb2.c RTK usb2.0 PHY driver - * - * Copyright (C) 2023 Realtek Semiconductor Corporation - * - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -/* GUSB2PHYACCn register */ -#define PHY_NEW_REG_REQ BIT(25) -#define PHY_VSTS_BUSY BIT(23) -#define PHY_VCTRL_SHIFT 8 -#define PHY_REG_DATA_MASK 0xff - -#define GET_LOW_NIBBLE(addr) ((addr) & 0x0f) -#define GET_HIGH_NIBBLE(addr) (((addr) & 0xf0) >> 4) - -#define EFUS_USB_DC_CAL_RATE 2 -#define EFUS_USB_DC_CAL_MAX 7 - -#define EFUS_USB_DC_DIS_RATE 1 -#define EFUS_USB_DC_DIS_MAX 7 - -#define MAX_PHY_DATA_SIZE 20 -#define OFFEST_PHY_READ 0x20 - -#define MAX_USB_PHY_NUM 4 -#define MAX_USB_PHY_PAGE0_DATA_SIZE 16 -#define MAX_USB_PHY_PAGE1_DATA_SIZE 16 -#define MAX_USB_PHY_PAGE2_DATA_SIZE 8 - -#define SET_PAGE_OFFSET 0xf4 -#define SET_PAGE_0 0x9b -#define SET_PAGE_1 0xbb -#define SET_PAGE_2 0xdb - -#define PAGE_START 0xe0 -#define PAGE0_0XE4 0xe4 -#define PAGE0_0XE6 0xe6 -#define PAGE0_0XE7 0xe7 -#define PAGE1_0XE0 0xe0 -#define PAGE1_0XE2 0xe2 - -#define SENSITIVITY_CTRL (BIT(4) | BIT(5) | BIT(6)) -#define ENABLE_AUTO_SENSITIVITY_CALIBRATION BIT(2) -#define DEFAULT_DC_DRIVING_VALUE (0x8) -#define DEFAULT_DC_DISCONNECTION_VALUE (0x6) -#define HS_CLK_SELECT BIT(6) - -struct phy_reg { - void __iomem *reg_wrap_vstatus; - void __iomem *reg_gusb2phyacc0; - int vstatus_index; -}; - -struct phy_data { - u8 addr; - u8 data; -}; - -struct phy_cfg { - int page0_size; - struct phy_data page0[MAX_USB_PHY_PAGE0_DATA_SIZE]; - int page1_size; - struct phy_data page1[MAX_USB_PHY_PAGE1_DATA_SIZE]; - int page2_size; - struct phy_data page2[MAX_USB_PHY_PAGE2_DATA_SIZE]; - - int num_phy; - - bool check_efuse; - int check_efuse_version; -#define CHECK_EFUSE_V1 1 -#define CHECK_EFUSE_V2 2 - int efuse_dc_driving_rate; - int efuse_dc_disconnect_rate; - int dc_driving_mask; - int dc_disconnect_mask; - bool usb_dc_disconnect_at_page0; - int driving_updated_for_dev_dis; - - bool do_toggle; - bool do_toggle_driving; - bool use_default_parameter; - bool is_double_sensitivity_mode; -}; - -struct phy_parameter { - struct phy_reg phy_reg; - - /* Get from efuse */ - s8 efuse_usb_dc_cal; - s8 efuse_usb_dc_dis; - - /* Get from dts */ - bool inverse_hstx_sync_clock; - u32 driving_level; - s32 driving_level_compensate; - s32 disconnection_compensate; -}; - -struct rtk_phy { - struct usb_phy phy; - struct device *dev; - - struct phy_cfg *phy_cfg; - int num_phy; - struct phy_parameter *phy_parameter; - - struct dentry *debug_dir; -}; - -/* mapping 0xE0 to 0 ... 0xE7 to 7, 0xF0 to 8 ,,, 0xF7 to 15 */ -static inline int page_addr_to_array_index(u8 addr) -{ - return (int)((((addr) - PAGE_START) & 0x7) + - ((((addr) - PAGE_START) & 0x10) >> 1)); -} - -static inline u8 array_index_to_page_addr(int index) -{ - return ((((index) + PAGE_START) & 0x7) + - ((((index) & 0x8) << 1) + PAGE_START)); -} - -#define PHY_IO_TIMEOUT_USEC (50000) -#define PHY_IO_DELAY_US (100) - -static inline int utmi_wait_register(void __iomem *reg, u32 mask, u32 result) -{ - int ret; - unsigned int val; - - ret = read_poll_timeout(readl, val, ((val & mask) == result), - PHY_IO_DELAY_US, PHY_IO_TIMEOUT_USEC, false, reg); - if (ret) { - pr_err("%s can't program USB phy\n", __func__); - return -ETIMEDOUT; - } - - return 0; -} - -static char rtk_phy_read(struct phy_reg *phy_reg, char addr) -{ - void __iomem *reg_gusb2phyacc0 = phy_reg->reg_gusb2phyacc0; - unsigned int val; - int ret = 0; - - addr -= OFFEST_PHY_READ; - - /* polling until VBusy == 0 */ - ret = utmi_wait_register(reg_gusb2phyacc0, PHY_VSTS_BUSY, 0); - if (ret) - return (char)ret; - - /* VCtrl = low nibble of addr, and set PHY_NEW_REG_REQ */ - val = PHY_NEW_REG_REQ | (GET_LOW_NIBBLE(addr) << PHY_VCTRL_SHIFT); - writel(val, reg_gusb2phyacc0); - ret = utmi_wait_register(reg_gusb2phyacc0, PHY_VSTS_BUSY, 0); - if (ret) - return (char)ret; - - /* VCtrl = high nibble of addr, and set PHY_NEW_REG_REQ */ - val = PHY_NEW_REG_REQ | (GET_HIGH_NIBBLE(addr) << PHY_VCTRL_SHIFT); - writel(val, reg_gusb2phyacc0); - ret = utmi_wait_register(reg_gusb2phyacc0, PHY_VSTS_BUSY, 0); - if (ret) - return (char)ret; - - val = readl(reg_gusb2phyacc0); - - return (char)(val & PHY_REG_DATA_MASK); -} - -static int rtk_phy_write(struct phy_reg *phy_reg, char addr, char data) -{ - unsigned int val; - void __iomem *reg_wrap_vstatus = phy_reg->reg_wrap_vstatus; - void __iomem *reg_gusb2phyacc0 = phy_reg->reg_gusb2phyacc0; - int shift_bits = phy_reg->vstatus_index * 8; - int ret = 0; - - /* write data to VStatusOut2 (data output to phy) */ - writel((u32)data << shift_bits, reg_wrap_vstatus); - - ret = utmi_wait_register(reg_gusb2phyacc0, PHY_VSTS_BUSY, 0); - if (ret) - return ret; - - /* VCtrl = low nibble of addr, set PHY_NEW_REG_REQ */ - val = PHY_NEW_REG_REQ | (GET_LOW_NIBBLE(addr) << PHY_VCTRL_SHIFT); - - writel(val, reg_gusb2phyacc0); - ret = utmi_wait_register(reg_gusb2phyacc0, PHY_VSTS_BUSY, 0); - if (ret) - return ret; - - /* VCtrl = high nibble of addr, set PHY_NEW_REG_REQ */ - val = PHY_NEW_REG_REQ | (GET_HIGH_NIBBLE(addr) << PHY_VCTRL_SHIFT); - - writel(val, reg_gusb2phyacc0); - ret = utmi_wait_register(reg_gusb2phyacc0, PHY_VSTS_BUSY, 0); - if (ret) - return ret; - - return 0; -} - -static int rtk_phy_set_page(struct phy_reg *phy_reg, int page) -{ - switch (page) { - case 0: - return rtk_phy_write(phy_reg, SET_PAGE_OFFSET, SET_PAGE_0); - case 1: - return rtk_phy_write(phy_reg, SET_PAGE_OFFSET, SET_PAGE_1); - case 2: - return rtk_phy_write(phy_reg, SET_PAGE_OFFSET, SET_PAGE_2); - default: - pr_err("%s error page=%d\n", __func__, page); - } - - return -EINVAL; -} - -static u8 __updated_dc_disconnect_level_page0_0xe4(struct phy_cfg *phy_cfg, - struct phy_parameter *phy_parameter, u8 data) -{ - u8 ret; - s32 val; - s32 dc_disconnect_mask = phy_cfg->dc_disconnect_mask; - int offset = 4; - - val = (s32)((data >> offset) & dc_disconnect_mask) - + phy_parameter->efuse_usb_dc_dis - + phy_parameter->disconnection_compensate; - - if (val > dc_disconnect_mask) - val = dc_disconnect_mask; - else if (val < 0) - val = 0; - - ret = (data & (~(dc_disconnect_mask << offset))) | - (val & dc_disconnect_mask) << offset; - - return ret; -} - -/* updated disconnect level at page0 */ -static void update_dc_disconnect_level_at_page0(struct rtk_phy *rtk_phy, - struct phy_parameter *phy_parameter, bool update) -{ - struct phy_cfg *phy_cfg; - struct phy_reg *phy_reg; - struct phy_data *phy_data_page; - struct phy_data *phy_data; - u8 addr, data; - int offset = 4; - s32 dc_disconnect_mask; - int i; - - phy_cfg = rtk_phy->phy_cfg; - phy_reg = &phy_parameter->phy_reg; - - /* Set page 0 */ - phy_data_page = phy_cfg->page0; - rtk_phy_set_page(phy_reg, 0); - - i = page_addr_to_array_index(PAGE0_0XE4); - phy_data = phy_data_page + i; - if (!phy_data->addr) { - phy_data->addr = PAGE0_0XE4; - phy_data->data = rtk_phy_read(phy_reg, PAGE0_0XE4); - } - - addr = phy_data->addr; - data = phy_data->data; - dc_disconnect_mask = phy_cfg->dc_disconnect_mask; - - if (update) - data = __updated_dc_disconnect_level_page0_0xe4(phy_cfg, phy_parameter, data); - else - data = (data & ~(dc_disconnect_mask << offset)) | - (DEFAULT_DC_DISCONNECTION_VALUE << offset); - - if (rtk_phy_write(phy_reg, addr, data)) - dev_err(rtk_phy->dev, - "%s: Error to set page1 parameter addr=0x%x value=0x%x\n", - __func__, addr, data); -} - -static u8 __updated_dc_disconnect_level_page1_0xe2(struct phy_cfg *phy_cfg, - struct phy_parameter *phy_parameter, u8 data) -{ - u8 ret; - s32 val; - s32 dc_disconnect_mask = phy_cfg->dc_disconnect_mask; - - if (phy_cfg->check_efuse_version == CHECK_EFUSE_V1) { - val = (s32)(data & dc_disconnect_mask) - + phy_parameter->efuse_usb_dc_dis - + phy_parameter->disconnection_compensate; - } else { /* for CHECK_EFUSE_V2 or no efuse */ - if (phy_parameter->efuse_usb_dc_dis) - val = (s32)(phy_parameter->efuse_usb_dc_dis + - phy_parameter->disconnection_compensate); - else - val = (s32)((data & dc_disconnect_mask) + - phy_parameter->disconnection_compensate); - } - - if (val > dc_disconnect_mask) - val = dc_disconnect_mask; - else if (val < 0) - val = 0; - - ret = (data & (~dc_disconnect_mask)) | (val & dc_disconnect_mask); - - return ret; -} - -/* updated disconnect level at page1 */ -static void update_dc_disconnect_level_at_page1(struct rtk_phy *rtk_phy, - struct phy_parameter *phy_parameter, bool update) -{ - struct phy_cfg *phy_cfg; - struct phy_data *phy_data_page; - struct phy_data *phy_data; - struct phy_reg *phy_reg; - u8 addr, data; - s32 dc_disconnect_mask; - int i; - - phy_cfg = rtk_phy->phy_cfg; - phy_reg = &phy_parameter->phy_reg; - - /* Set page 1 */ - phy_data_page = phy_cfg->page1; - rtk_phy_set_page(phy_reg, 1); - - i = page_addr_to_array_index(PAGE1_0XE2); - phy_data = phy_data_page + i; - if (!phy_data->addr) { - phy_data->addr = PAGE1_0XE2; - phy_data->data = rtk_phy_read(phy_reg, PAGE1_0XE2); - } - - addr = phy_data->addr; - data = phy_data->data; - dc_disconnect_mask = phy_cfg->dc_disconnect_mask; - - if (update) - data = __updated_dc_disconnect_level_page1_0xe2(phy_cfg, phy_parameter, data); - else - data = (data & ~dc_disconnect_mask) | DEFAULT_DC_DISCONNECTION_VALUE; - - if (rtk_phy_write(phy_reg, addr, data)) - dev_err(rtk_phy->dev, - "%s: Error to set page1 parameter addr=0x%x value=0x%x\n", - __func__, addr, data); -} - -static void update_dc_disconnect_level(struct rtk_phy *rtk_phy, - struct phy_parameter *phy_parameter, bool update) -{ - struct phy_cfg *phy_cfg = rtk_phy->phy_cfg; - - if (phy_cfg->usb_dc_disconnect_at_page0) - update_dc_disconnect_level_at_page0(rtk_phy, phy_parameter, update); - else - update_dc_disconnect_level_at_page1(rtk_phy, phy_parameter, update); -} - -static u8 __update_dc_driving_page0_0xe4(struct phy_cfg *phy_cfg, - struct phy_parameter *phy_parameter, u8 data) -{ - s32 driving_level_compensate = phy_parameter->driving_level_compensate; - s32 dc_driving_mask = phy_cfg->dc_driving_mask; - s32 val; - u8 ret; - - if (phy_cfg->check_efuse_version == CHECK_EFUSE_V1) { - val = (s32)(data & dc_driving_mask) + driving_level_compensate - + phy_parameter->efuse_usb_dc_cal; - } else { /* for CHECK_EFUSE_V2 or no efuse */ - if (phy_parameter->efuse_usb_dc_cal) - val = (s32)((phy_parameter->efuse_usb_dc_cal & dc_driving_mask) - + driving_level_compensate); - else - val = (s32)(data & dc_driving_mask); - } - - if (val > dc_driving_mask) - val = dc_driving_mask; - else if (val < 0) - val = 0; - - ret = (data & (~dc_driving_mask)) | (val & dc_driving_mask); - - return ret; -} - -static void update_dc_driving_level(struct rtk_phy *rtk_phy, - struct phy_parameter *phy_parameter) -{ - struct phy_cfg *phy_cfg; - struct phy_reg *phy_reg; - - phy_reg = &phy_parameter->phy_reg; - phy_cfg = rtk_phy->phy_cfg; - if (!phy_cfg->page0[4].addr) { - rtk_phy_set_page(phy_reg, 0); - phy_cfg->page0[4].addr = PAGE0_0XE4; - phy_cfg->page0[4].data = rtk_phy_read(phy_reg, PAGE0_0XE4); - } - - if (phy_parameter->driving_level != DEFAULT_DC_DRIVING_VALUE) { - u32 dc_driving_mask; - u8 driving_level; - u8 data; - - data = phy_cfg->page0[4].data; - dc_driving_mask = phy_cfg->dc_driving_mask; - driving_level = data & dc_driving_mask; - - dev_dbg(rtk_phy->dev, "%s driving_level=%d => dts driving_level=%d\n", - __func__, driving_level, phy_parameter->driving_level); - - phy_cfg->page0[4].data = (data & (~dc_driving_mask)) | - (phy_parameter->driving_level & dc_driving_mask); - } - - phy_cfg->page0[4].data = __update_dc_driving_page0_0xe4(phy_cfg, - phy_parameter, - phy_cfg->page0[4].data); -} - -static void update_hs_clk_select(struct rtk_phy *rtk_phy, - struct phy_parameter *phy_parameter) -{ - struct phy_cfg *phy_cfg; - struct phy_reg *phy_reg; - - phy_cfg = rtk_phy->phy_cfg; - phy_reg = &phy_parameter->phy_reg; - - if (phy_parameter->inverse_hstx_sync_clock) { - if (!phy_cfg->page0[6].addr) { - rtk_phy_set_page(phy_reg, 0); - phy_cfg->page0[6].addr = PAGE0_0XE6; - phy_cfg->page0[6].data = rtk_phy_read(phy_reg, PAGE0_0XE6); - } - - phy_cfg->page0[6].data = phy_cfg->page0[6].data | HS_CLK_SELECT; - } -} - -static void do_rtk_phy_toggle(struct rtk_phy *rtk_phy, - int index, bool connect) -{ - struct phy_parameter *phy_parameter; - struct phy_cfg *phy_cfg; - struct phy_reg *phy_reg; - struct phy_data *phy_data_page; - u8 addr, data; - int i; - - phy_cfg = rtk_phy->phy_cfg; - phy_parameter = &((struct phy_parameter *)rtk_phy->phy_parameter)[index]; - phy_reg = &phy_parameter->phy_reg; - - if (!phy_cfg->do_toggle) - goto out; - - if (phy_cfg->is_double_sensitivity_mode) - goto do_toggle_driving; - - /* Set page 0 */ - rtk_phy_set_page(phy_reg, 0); - - addr = PAGE0_0XE7; - data = rtk_phy_read(phy_reg, addr); - - if (connect) - rtk_phy_write(phy_reg, addr, data & (~SENSITIVITY_CTRL)); - else - rtk_phy_write(phy_reg, addr, data | (SENSITIVITY_CTRL)); - -do_toggle_driving: - - if (!phy_cfg->do_toggle_driving) - goto do_toggle; - - /* Page 0 addr 0xE4 driving capability */ - - /* Set page 0 */ - phy_data_page = phy_cfg->page0; - rtk_phy_set_page(phy_reg, 0); - - i = page_addr_to_array_index(PAGE0_0XE4); - addr = phy_data_page[i].addr; - data = phy_data_page[i].data; - - if (connect) { - rtk_phy_write(phy_reg, addr, data); - } else { - u8 value; - s32 tmp; - s32 driving_updated = - phy_cfg->driving_updated_for_dev_dis; - s32 dc_driving_mask = phy_cfg->dc_driving_mask; - - tmp = (s32)(data & dc_driving_mask) + driving_updated; - - if (tmp > dc_driving_mask) - tmp = dc_driving_mask; - else if (tmp < 0) - tmp = 0; - - value = (data & (~dc_driving_mask)) | (tmp & dc_driving_mask); - - rtk_phy_write(phy_reg, addr, value); - } - -do_toggle: - /* restore dc disconnect level before toggle */ - update_dc_disconnect_level(rtk_phy, phy_parameter, false); - - /* Set page 1 */ - rtk_phy_set_page(phy_reg, 1); - - addr = PAGE1_0XE0; - data = rtk_phy_read(phy_reg, addr); - - rtk_phy_write(phy_reg, addr, data & - (~ENABLE_AUTO_SENSITIVITY_CALIBRATION)); - mdelay(1); - rtk_phy_write(phy_reg, addr, data | - (ENABLE_AUTO_SENSITIVITY_CALIBRATION)); - - /* update dc disconnect level after toggle */ - update_dc_disconnect_level(rtk_phy, phy_parameter, true); - -out: - return; -} - -static int do_rtk_phy_init(struct rtk_phy *rtk_phy, int index) -{ - struct phy_parameter *phy_parameter; - struct phy_cfg *phy_cfg; - struct phy_data *phy_data_page; - struct phy_reg *phy_reg; - int i; - - phy_cfg = rtk_phy->phy_cfg; - phy_parameter = &((struct phy_parameter *)rtk_phy->phy_parameter)[index]; - phy_reg = &phy_parameter->phy_reg; - - if (phy_cfg->use_default_parameter) { - dev_dbg(rtk_phy->dev, "%s phy#%d use default parameter\n", - __func__, index); - goto do_toggle; - } - - /* Set page 0 */ - phy_data_page = phy_cfg->page0; - rtk_phy_set_page(phy_reg, 0); - - for (i = 0; i < phy_cfg->page0_size; i++) { - struct phy_data *phy_data = phy_data_page + i; - u8 addr = phy_data->addr; - u8 data = phy_data->data; - - if (!addr) - continue; - - if (rtk_phy_write(phy_reg, addr, data)) { - dev_err(rtk_phy->dev, - "%s: Error to set page0 parameter addr=0x%x value=0x%x\n", - __func__, addr, data); - return -EINVAL; - } - } - - /* Set page 1 */ - phy_data_page = phy_cfg->page1; - rtk_phy_set_page(phy_reg, 1); - - for (i = 0; i < phy_cfg->page1_size; i++) { - struct phy_data *phy_data = phy_data_page + i; - u8 addr = phy_data->addr; - u8 data = phy_data->data; - - if (!addr) - continue; - - if (rtk_phy_write(phy_reg, addr, data)) { - dev_err(rtk_phy->dev, - "%s: Error to set page1 parameter addr=0x%x value=0x%x\n", - __func__, addr, data); - return -EINVAL; - } - } - - if (phy_cfg->page2_size == 0) - goto do_toggle; - - /* Set page 2 */ - phy_data_page = phy_cfg->page2; - rtk_phy_set_page(phy_reg, 2); - - for (i = 0; i < phy_cfg->page2_size; i++) { - struct phy_data *phy_data = phy_data_page + i; - u8 addr = phy_data->addr; - u8 data = phy_data->data; - - if (!addr) - continue; - - if (rtk_phy_write(phy_reg, addr, data)) { - dev_err(rtk_phy->dev, - "%s: Error to set page2 parameter addr=0x%x value=0x%x\n", - __func__, addr, data); - return -EINVAL; - } - } - -do_toggle: - do_rtk_phy_toggle(rtk_phy, index, false); - - return 0; -} - -static int rtk_phy_init(struct phy *phy) -{ - struct rtk_phy *rtk_phy = phy_get_drvdata(phy); - unsigned long phy_init_time = jiffies; - int i, ret = 0; - - if (!rtk_phy) - return -EINVAL; - - for (i = 0; i < rtk_phy->num_phy; i++) - ret = do_rtk_phy_init(rtk_phy, i); - - dev_dbg(rtk_phy->dev, "Initialized RTK USB 2.0 PHY (take %dms)\n", - jiffies_to_msecs(jiffies - phy_init_time)); - return ret; -} - -static int rtk_phy_exit(struct phy *phy) -{ - return 0; -} - -static const struct phy_ops ops = { - .init = rtk_phy_init, - .exit = rtk_phy_exit, - .owner = THIS_MODULE, -}; - -static void rtk_phy_toggle(struct usb_phy *usb2_phy, bool connect, int port) -{ - int index = port; - struct rtk_phy *rtk_phy = NULL; - - rtk_phy = dev_get_drvdata(usb2_phy->dev); - - if (index > rtk_phy->num_phy) { - dev_err(rtk_phy->dev, "%s: The port=%d is not in usb phy (num_phy=%d)\n", - __func__, index, rtk_phy->num_phy); - return; - } - - do_rtk_phy_toggle(rtk_phy, index, connect); -} - -static int rtk_phy_notify_port_status(struct usb_phy *x, int port, - u16 portstatus, u16 portchange) -{ - bool connect = false; - - pr_debug("%s port=%d portstatus=0x%x portchange=0x%x\n", - __func__, port, (int)portstatus, (int)portchange); - if (portstatus & USB_PORT_STAT_CONNECTION) - connect = true; - - if (portchange & USB_PORT_STAT_C_CONNECTION) - rtk_phy_toggle(x, connect, port); - - return 0; -} - -#ifdef CONFIG_DEBUG_FS -static struct dentry *create_phy_debug_root(void) -{ - struct dentry *phy_debug_root; - - phy_debug_root = debugfs_lookup("phy", usb_debug_root); - if (!phy_debug_root) - phy_debug_root = debugfs_create_dir("phy", usb_debug_root); - - return phy_debug_root; -} - -static int rtk_usb2_parameter_show(struct seq_file *s, void *unused) -{ - struct rtk_phy *rtk_phy = s->private; - struct phy_cfg *phy_cfg; - int i, index; - - phy_cfg = rtk_phy->phy_cfg; - - seq_puts(s, "Property:\n"); - seq_printf(s, " check_efuse: %s\n", - phy_cfg->check_efuse ? "Enable" : "Disable"); - seq_printf(s, " check_efuse_version: %d\n", - phy_cfg->check_efuse_version); - seq_printf(s, " efuse_dc_driving_rate: %d\n", - phy_cfg->efuse_dc_driving_rate); - seq_printf(s, " dc_driving_mask: 0x%x\n", - phy_cfg->dc_driving_mask); - seq_printf(s, " efuse_dc_disconnect_rate: %d\n", - phy_cfg->efuse_dc_disconnect_rate); - seq_printf(s, " dc_disconnect_mask: 0x%x\n", - phy_cfg->dc_disconnect_mask); - seq_printf(s, " usb_dc_disconnect_at_page0: %s\n", - phy_cfg->usb_dc_disconnect_at_page0 ? "true" : "false"); - seq_printf(s, " do_toggle: %s\n", - phy_cfg->do_toggle ? "Enable" : "Disable"); - seq_printf(s, " do_toggle_driving: %s\n", - phy_cfg->do_toggle_driving ? "Enable" : "Disable"); - seq_printf(s, " driving_updated_for_dev_dis: 0x%x\n", - phy_cfg->driving_updated_for_dev_dis); - seq_printf(s, " use_default_parameter: %s\n", - phy_cfg->use_default_parameter ? "Enable" : "Disable"); - seq_printf(s, " is_double_sensitivity_mode: %s\n", - phy_cfg->is_double_sensitivity_mode ? "Enable" : "Disable"); - - for (index = 0; index < rtk_phy->num_phy; index++) { - struct phy_parameter *phy_parameter; - struct phy_reg *phy_reg; - struct phy_data *phy_data_page; - - phy_parameter = &((struct phy_parameter *)rtk_phy->phy_parameter)[index]; - phy_reg = &phy_parameter->phy_reg; - - seq_printf(s, "PHY %d:\n", index); - - seq_puts(s, "Page 0:\n"); - /* Set page 0 */ - phy_data_page = phy_cfg->page0; - rtk_phy_set_page(phy_reg, 0); - - for (i = 0; i < phy_cfg->page0_size; i++) { - struct phy_data *phy_data = phy_data_page + i; - u8 addr = array_index_to_page_addr(i); - u8 data = phy_data->data; - u8 value = rtk_phy_read(phy_reg, addr); - - if (phy_data->addr) - seq_printf(s, " Page 0: addr=0x%x data=0x%02x ==> read value=0x%02x\n", - addr, data, value); - else - seq_printf(s, " Page 0: addr=0x%x data=none ==> read value=0x%02x\n", - addr, value); - } - - seq_puts(s, "Page 1:\n"); - /* Set page 1 */ - phy_data_page = phy_cfg->page1; - rtk_phy_set_page(phy_reg, 1); - - for (i = 0; i < phy_cfg->page1_size; i++) { - struct phy_data *phy_data = phy_data_page + i; - u8 addr = array_index_to_page_addr(i); - u8 data = phy_data->data; - u8 value = rtk_phy_read(phy_reg, addr); - - if (phy_data->addr) - seq_printf(s, " Page 1: addr=0x%x data=0x%02x ==> read value=0x%02x\n", - addr, data, value); - else - seq_printf(s, " Page 1: addr=0x%x data=none ==> read value=0x%02x\n", - addr, value); - } - - if (phy_cfg->page2_size == 0) - goto out; - - seq_puts(s, "Page 2:\n"); - /* Set page 2 */ - phy_data_page = phy_cfg->page2; - rtk_phy_set_page(phy_reg, 2); - - for (i = 0; i < phy_cfg->page2_size; i++) { - struct phy_data *phy_data = phy_data_page + i; - u8 addr = array_index_to_page_addr(i); - u8 data = phy_data->data; - u8 value = rtk_phy_read(phy_reg, addr); - - if (phy_data->addr) - seq_printf(s, " Page 2: addr=0x%x data=0x%02x ==> read value=0x%02x\n", - addr, data, value); - else - seq_printf(s, " Page 2: addr=0x%x data=none ==> read value=0x%02x\n", - addr, value); - } - -out: - seq_puts(s, "PHY Property:\n"); - seq_printf(s, " efuse_usb_dc_cal: %d\n", - (int)phy_parameter->efuse_usb_dc_cal); - seq_printf(s, " efuse_usb_dc_dis: %d\n", - (int)phy_parameter->efuse_usb_dc_dis); - seq_printf(s, " inverse_hstx_sync_clock: %s\n", - phy_parameter->inverse_hstx_sync_clock ? "Enable" : "Disable"); - seq_printf(s, " driving_level: %d\n", - phy_parameter->driving_level); - seq_printf(s, " driving_level_compensate: %d\n", - phy_parameter->driving_level_compensate); - seq_printf(s, " disconnection_compensate: %d\n", - phy_parameter->disconnection_compensate); - } - - return 0; -} -DEFINE_SHOW_ATTRIBUTE(rtk_usb2_parameter); - -static inline void create_debug_files(struct rtk_phy *rtk_phy) -{ - struct dentry *phy_debug_root = NULL; - - phy_debug_root = create_phy_debug_root(); - if (!phy_debug_root) - return; - - rtk_phy->debug_dir = debugfs_create_dir(dev_name(rtk_phy->dev), - phy_debug_root); - - debugfs_create_file("parameter", 0444, rtk_phy->debug_dir, rtk_phy, - &rtk_usb2_parameter_fops); - - return; -} - -static inline void remove_debug_files(struct rtk_phy *rtk_phy) -{ - debugfs_remove_recursive(rtk_phy->debug_dir); -} -#else -static inline void create_debug_files(struct rtk_phy *rtk_phy) { } -static inline void remove_debug_files(struct rtk_phy *rtk_phy) { } -#endif /* CONFIG_DEBUG_FS */ - -static int get_phy_data_by_efuse(struct rtk_phy *rtk_phy, - struct phy_parameter *phy_parameter, int index) -{ - struct phy_cfg *phy_cfg = rtk_phy->phy_cfg; - u8 value = 0; - struct nvmem_cell *cell; - struct soc_device_attribute rtk_soc_groot[] = { - { .family = "Realtek Groot",}, - { /* empty */ } }; - - if (!phy_cfg->check_efuse) - goto out; - - /* Read efuse for usb dc cal */ - cell = nvmem_cell_get(rtk_phy->dev, "usb-dc-cal"); - if (IS_ERR(cell)) { - dev_dbg(rtk_phy->dev, "%s no usb-dc-cal: %ld\n", - __func__, PTR_ERR(cell)); - } else { - unsigned char *buf; - size_t buf_size; - - buf = nvmem_cell_read(cell, &buf_size); - if (!IS_ERR(buf)) { - value = buf[0] & phy_cfg->dc_driving_mask; - kfree(buf); - } - nvmem_cell_put(cell); - } - - if (phy_cfg->check_efuse_version == CHECK_EFUSE_V1) { - int rate = phy_cfg->efuse_dc_driving_rate; - - if (value <= EFUS_USB_DC_CAL_MAX) - phy_parameter->efuse_usb_dc_cal = (int8_t)(value * rate); - else - phy_parameter->efuse_usb_dc_cal = -(int8_t) - ((EFUS_USB_DC_CAL_MAX & value) * rate); - - if (soc_device_match(rtk_soc_groot)) { - dev_dbg(rtk_phy->dev, "For groot IC we need a workaround to adjust efuse_usb_dc_cal\n"); - - /* We don't multiple dc_cal_rate=2 for positive dc cal compensate */ - if (value <= EFUS_USB_DC_CAL_MAX) - phy_parameter->efuse_usb_dc_cal = (int8_t)(value); - - /* We set max dc cal compensate is 0x8 if otp is 0x7 */ - if (value == 0x7) - phy_parameter->efuse_usb_dc_cal = (int8_t)(value + 1); - } - } else { /* for CHECK_EFUSE_V2 */ - phy_parameter->efuse_usb_dc_cal = value & phy_cfg->dc_driving_mask; - } - - /* Read efuse for usb dc disconnect level */ - value = 0; - cell = nvmem_cell_get(rtk_phy->dev, "usb-dc-dis"); - if (IS_ERR(cell)) { - dev_dbg(rtk_phy->dev, "%s no usb-dc-dis: %ld\n", - __func__, PTR_ERR(cell)); - } else { - unsigned char *buf; - size_t buf_size; - - buf = nvmem_cell_read(cell, &buf_size); - if (!IS_ERR(buf)) { - value = buf[0] & phy_cfg->dc_disconnect_mask; - kfree(buf); - } - nvmem_cell_put(cell); - } - - if (phy_cfg->check_efuse_version == CHECK_EFUSE_V1) { - int rate = phy_cfg->efuse_dc_disconnect_rate; - - if (value <= EFUS_USB_DC_DIS_MAX) - phy_parameter->efuse_usb_dc_dis = (int8_t)(value * rate); - else - phy_parameter->efuse_usb_dc_dis = -(int8_t) - ((EFUS_USB_DC_DIS_MAX & value) * rate); - } else { /* for CHECK_EFUSE_V2 */ - phy_parameter->efuse_usb_dc_dis = value & phy_cfg->dc_disconnect_mask; - } - -out: - return 0; -} - -static int parse_phy_data(struct rtk_phy *rtk_phy) -{ - struct device *dev = rtk_phy->dev; - struct device_node *np = dev->of_node; - struct phy_parameter *phy_parameter; - int ret = 0; - int index; - - rtk_phy->phy_parameter = devm_kzalloc(dev, sizeof(struct phy_parameter) * - rtk_phy->num_phy, GFP_KERNEL); - if (!rtk_phy->phy_parameter) - return -ENOMEM; - - for (index = 0; index < rtk_phy->num_phy; index++) { - phy_parameter = &((struct phy_parameter *)rtk_phy->phy_parameter)[index]; - - phy_parameter->phy_reg.reg_wrap_vstatus = of_iomap(np, 0); - phy_parameter->phy_reg.reg_gusb2phyacc0 = of_iomap(np, 1) + index; - phy_parameter->phy_reg.vstatus_index = index; - - if (of_property_read_bool(np, "realtek,inverse-hstx-sync-clock")) - phy_parameter->inverse_hstx_sync_clock = true; - else - phy_parameter->inverse_hstx_sync_clock = false; - - if (of_property_read_u32_index(np, "realtek,driving-level", - index, &phy_parameter->driving_level)) - phy_parameter->driving_level = DEFAULT_DC_DRIVING_VALUE; - - if (of_property_read_u32_index(np, "realtek,driving-level-compensate", - index, &phy_parameter->driving_level_compensate)) - phy_parameter->driving_level_compensate = 0; - - if (of_property_read_u32_index(np, "realtek,disconnection-compensate", - index, &phy_parameter->disconnection_compensate)) - phy_parameter->disconnection_compensate = 0; - - get_phy_data_by_efuse(rtk_phy, phy_parameter, index); - - update_dc_driving_level(rtk_phy, phy_parameter); - - update_hs_clk_select(rtk_phy, phy_parameter); - } - - return ret; -} - -static int rtk_usb2phy_probe(struct platform_device *pdev) -{ - struct rtk_phy *rtk_phy; - struct device *dev = &pdev->dev; - struct phy *generic_phy; - struct phy_provider *phy_provider; - const struct phy_cfg *phy_cfg; - int ret = 0; - - phy_cfg = of_device_get_match_data(dev); - if (!phy_cfg) { - dev_err(dev, "phy config are not assigned!\n"); - return -EINVAL; - } - - rtk_phy = devm_kzalloc(dev, sizeof(*rtk_phy), GFP_KERNEL); - if (!rtk_phy) - return -ENOMEM; - - rtk_phy->dev = &pdev->dev; - rtk_phy->phy.dev = rtk_phy->dev; - rtk_phy->phy.label = "rtk-usb2phy"; - rtk_phy->phy.notify_port_status = rtk_phy_notify_port_status; - - rtk_phy->phy_cfg = devm_kzalloc(dev, sizeof(*phy_cfg), GFP_KERNEL); - - memcpy(rtk_phy->phy_cfg, phy_cfg, sizeof(*phy_cfg)); - - rtk_phy->num_phy = phy_cfg->num_phy; - - ret = parse_phy_data(rtk_phy); - if (ret) - goto err; - - platform_set_drvdata(pdev, rtk_phy); - - generic_phy = devm_phy_create(rtk_phy->dev, NULL, &ops); - if (IS_ERR(generic_phy)) - return PTR_ERR(generic_phy); - - phy_set_drvdata(generic_phy, rtk_phy); - - phy_provider = devm_of_phy_provider_register(rtk_phy->dev, - of_phy_simple_xlate); - if (IS_ERR(phy_provider)) - return PTR_ERR(phy_provider); - - ret = usb_add_phy_dev(&rtk_phy->phy); - if (ret) - goto err; - - create_debug_files(rtk_phy); - -err: - return ret; -} - -static void rtk_usb2phy_remove(struct platform_device *pdev) -{ - struct rtk_phy *rtk_phy = platform_get_drvdata(pdev); - - remove_debug_files(rtk_phy); - - usb_remove_phy(&rtk_phy->phy); -} - -static const struct phy_cfg rtd1295_phy_cfg = { - .page0_size = MAX_USB_PHY_PAGE0_DATA_SIZE, - .page0 = { [0] = {0xe0, 0x90}, - [3] = {0xe3, 0x3a}, - [4] = {0xe4, 0x68}, - [6] = {0xe6, 0x91}, - [13] = {0xf5, 0x81}, - [15] = {0xf7, 0x02}, }, - .page1_size = 8, - .page1 = { /* default parameter */ }, - .page2_size = 0, - .page2 = { /* no parameter */ }, - .num_phy = 1, - .check_efuse = false, - .check_efuse_version = CHECK_EFUSE_V1, - .efuse_dc_driving_rate = 1, - .dc_driving_mask = 0xf, - .efuse_dc_disconnect_rate = EFUS_USB_DC_DIS_RATE, - .dc_disconnect_mask = 0xf, - .usb_dc_disconnect_at_page0 = true, - .do_toggle = true, - .do_toggle_driving = false, - .driving_updated_for_dev_dis = 0xf, - .use_default_parameter = false, - .is_double_sensitivity_mode = false, -}; - -static const struct phy_cfg rtd1395_phy_cfg = { - .page0_size = MAX_USB_PHY_PAGE0_DATA_SIZE, - .page0 = { [4] = {0xe4, 0xac}, - [13] = {0xf5, 0x00}, - [15] = {0xf7, 0x02}, }, - .page1_size = 8, - .page1 = { /* default parameter */ }, - .page2_size = 0, - .page2 = { /* no parameter */ }, - .num_phy = 1, - .check_efuse = false, - .check_efuse_version = CHECK_EFUSE_V1, - .efuse_dc_driving_rate = 1, - .dc_driving_mask = 0xf, - .efuse_dc_disconnect_rate = EFUS_USB_DC_DIS_RATE, - .dc_disconnect_mask = 0xf, - .usb_dc_disconnect_at_page0 = true, - .do_toggle = true, - .do_toggle_driving = false, - .driving_updated_for_dev_dis = 0xf, - .use_default_parameter = false, - .is_double_sensitivity_mode = false, -}; - -static const struct phy_cfg rtd1395_phy_cfg_2port = { - .page0_size = MAX_USB_PHY_PAGE0_DATA_SIZE, - .page0 = { [4] = {0xe4, 0xac}, - [13] = {0xf5, 0x00}, - [15] = {0xf7, 0x02}, }, - .page1_size = 8, - .page1 = { /* default parameter */ }, - .page2_size = 0, - .page2 = { /* no parameter */ }, - .num_phy = 2, - .check_efuse = false, - .check_efuse_version = CHECK_EFUSE_V1, - .efuse_dc_driving_rate = 1, - .dc_driving_mask = 0xf, - .efuse_dc_disconnect_rate = EFUS_USB_DC_DIS_RATE, - .dc_disconnect_mask = 0xf, - .usb_dc_disconnect_at_page0 = true, - .do_toggle = true, - .do_toggle_driving = false, - .driving_updated_for_dev_dis = 0xf, - .use_default_parameter = false, - .is_double_sensitivity_mode = false, -}; - -static const struct phy_cfg rtd1619_phy_cfg = { - .page0_size = MAX_USB_PHY_PAGE0_DATA_SIZE, - .page0 = { [4] = {0xe4, 0x68}, }, - .page1_size = 8, - .page1 = { /* default parameter */ }, - .page2_size = 0, - .page2 = { /* no parameter */ }, - .num_phy = 1, - .check_efuse = true, - .check_efuse_version = CHECK_EFUSE_V1, - .efuse_dc_driving_rate = 1, - .dc_driving_mask = 0xf, - .efuse_dc_disconnect_rate = EFUS_USB_DC_DIS_RATE, - .dc_disconnect_mask = 0xf, - .usb_dc_disconnect_at_page0 = true, - .do_toggle = true, - .do_toggle_driving = false, - .driving_updated_for_dev_dis = 0xf, - .use_default_parameter = false, - .is_double_sensitivity_mode = false, -}; - -static const struct phy_cfg rtd1319_phy_cfg = { - .page0_size = MAX_USB_PHY_PAGE0_DATA_SIZE, - .page0 = { [0] = {0xe0, 0x18}, - [4] = {0xe4, 0x6a}, - [7] = {0xe7, 0x71}, - [13] = {0xf5, 0x15}, - [15] = {0xf7, 0x32}, }, - .page1_size = 8, - .page1 = { [3] = {0xe3, 0x44}, }, - .page2_size = MAX_USB_PHY_PAGE2_DATA_SIZE, - .page2 = { [0] = {0xe0, 0x01}, }, - .num_phy = 1, - .check_efuse = true, - .check_efuse_version = CHECK_EFUSE_V1, - .efuse_dc_driving_rate = 1, - .dc_driving_mask = 0xf, - .efuse_dc_disconnect_rate = EFUS_USB_DC_DIS_RATE, - .dc_disconnect_mask = 0xf, - .usb_dc_disconnect_at_page0 = true, - .do_toggle = true, - .do_toggle_driving = true, - .driving_updated_for_dev_dis = 0xf, - .use_default_parameter = false, - .is_double_sensitivity_mode = true, -}; - -static const struct phy_cfg rtd1312c_phy_cfg = { - .page0_size = MAX_USB_PHY_PAGE0_DATA_SIZE, - .page0 = { [0] = {0xe0, 0x14}, - [4] = {0xe4, 0x67}, - [5] = {0xe5, 0x55}, }, - .page1_size = 8, - .page1 = { [3] = {0xe3, 0x23}, - [6] = {0xe6, 0x58}, }, - .page2_size = MAX_USB_PHY_PAGE2_DATA_SIZE, - .page2 = { /* default parameter */ }, - .num_phy = 1, - .check_efuse = true, - .check_efuse_version = CHECK_EFUSE_V1, - .efuse_dc_driving_rate = 1, - .dc_driving_mask = 0xf, - .efuse_dc_disconnect_rate = EFUS_USB_DC_DIS_RATE, - .dc_disconnect_mask = 0xf, - .usb_dc_disconnect_at_page0 = true, - .do_toggle = true, - .do_toggle_driving = true, - .driving_updated_for_dev_dis = 0xf, - .use_default_parameter = false, - .is_double_sensitivity_mode = true, -}; - -static const struct phy_cfg rtd1619b_phy_cfg = { - .page0_size = MAX_USB_PHY_PAGE0_DATA_SIZE, - .page0 = { [0] = {0xe0, 0xa3}, - [4] = {0xe4, 0x88}, - [5] = {0xe5, 0x4f}, - [6] = {0xe6, 0x02}, }, - .page1_size = 8, - .page1 = { [3] = {0xe3, 0x64}, }, - .page2_size = MAX_USB_PHY_PAGE2_DATA_SIZE, - .page2 = { [7] = {0xe7, 0x45}, }, - .num_phy = 1, - .check_efuse = true, - .check_efuse_version = CHECK_EFUSE_V1, - .efuse_dc_driving_rate = EFUS_USB_DC_CAL_RATE, - .dc_driving_mask = 0x1f, - .efuse_dc_disconnect_rate = EFUS_USB_DC_DIS_RATE, - .dc_disconnect_mask = 0xf, - .usb_dc_disconnect_at_page0 = false, - .do_toggle = true, - .do_toggle_driving = true, - .driving_updated_for_dev_dis = 0x8, - .use_default_parameter = false, - .is_double_sensitivity_mode = true, -}; - -static const struct phy_cfg rtd1319d_phy_cfg = { - .page0_size = MAX_USB_PHY_PAGE0_DATA_SIZE, - .page0 = { [0] = {0xe0, 0xa3}, - [4] = {0xe4, 0x8e}, - [5] = {0xe5, 0x4f}, - [6] = {0xe6, 0x02}, }, - .page1_size = MAX_USB_PHY_PAGE1_DATA_SIZE, - .page1 = { [14] = {0xf5, 0x1}, }, - .page2_size = MAX_USB_PHY_PAGE2_DATA_SIZE, - .page2 = { [7] = {0xe7, 0x44}, }, - .check_efuse = true, - .num_phy = 1, - .check_efuse_version = CHECK_EFUSE_V1, - .efuse_dc_driving_rate = EFUS_USB_DC_CAL_RATE, - .dc_driving_mask = 0x1f, - .efuse_dc_disconnect_rate = EFUS_USB_DC_DIS_RATE, - .dc_disconnect_mask = 0xf, - .usb_dc_disconnect_at_page0 = false, - .do_toggle = true, - .do_toggle_driving = false, - .driving_updated_for_dev_dis = 0x8, - .use_default_parameter = false, - .is_double_sensitivity_mode = true, -}; - -static const struct phy_cfg rtd1315e_phy_cfg = { - .page0_size = MAX_USB_PHY_PAGE0_DATA_SIZE, - .page0 = { [0] = {0xe0, 0xa3}, - [4] = {0xe4, 0x8c}, - [5] = {0xe5, 0x4f}, - [6] = {0xe6, 0x02}, }, - .page1_size = MAX_USB_PHY_PAGE1_DATA_SIZE, - .page1 = { [3] = {0xe3, 0x7f}, - [14] = {0xf5, 0x01}, }, - .page2_size = MAX_USB_PHY_PAGE2_DATA_SIZE, - .page2 = { [7] = {0xe7, 0x44}, }, - .num_phy = 1, - .check_efuse = true, - .check_efuse_version = CHECK_EFUSE_V2, - .efuse_dc_driving_rate = EFUS_USB_DC_CAL_RATE, - .dc_driving_mask = 0x1f, - .efuse_dc_disconnect_rate = EFUS_USB_DC_DIS_RATE, - .dc_disconnect_mask = 0xf, - .usb_dc_disconnect_at_page0 = false, - .do_toggle = true, - .do_toggle_driving = false, - .driving_updated_for_dev_dis = 0x8, - .use_default_parameter = false, - .is_double_sensitivity_mode = true, -}; - -static const struct of_device_id usbphy_rtk_dt_match[] = { - { .compatible = "realtek,rtd1295-usb2phy", .data = &rtd1295_phy_cfg }, - { .compatible = "realtek,rtd1312c-usb2phy", .data = &rtd1312c_phy_cfg }, - { .compatible = "realtek,rtd1315e-usb2phy", .data = &rtd1315e_phy_cfg }, - { .compatible = "realtek,rtd1319-usb2phy", .data = &rtd1319_phy_cfg }, - { .compatible = "realtek,rtd1319d-usb2phy", .data = &rtd1319d_phy_cfg }, - { .compatible = "realtek,rtd1395-usb2phy", .data = &rtd1395_phy_cfg }, - { .compatible = "realtek,rtd1395-usb2phy-2port", .data = &rtd1395_phy_cfg_2port }, - { .compatible = "realtek,rtd1619-usb2phy", .data = &rtd1619_phy_cfg }, - { .compatible = "realtek,rtd1619b-usb2phy", .data = &rtd1619b_phy_cfg }, - {}, -}; -MODULE_DEVICE_TABLE(of, usbphy_rtk_dt_match); - -static struct platform_driver rtk_usb2phy_driver = { - .probe = rtk_usb2phy_probe, - .remove_new = rtk_usb2phy_remove, - .driver = { - .name = "rtk-usb2phy", - .of_match_table = usbphy_rtk_dt_match, - }, -}; - -module_platform_driver(rtk_usb2phy_driver); - -MODULE_LICENSE("GPL"); -MODULE_ALIAS("platform: rtk-usb2phy"); -MODULE_AUTHOR("Stanley Chang "); -MODULE_DESCRIPTION("Realtek usb 2.0 phy driver"); -- cgit v1.2.3 From 1a229d8690a0f8951fc4aa8b76a7efab0d8de342 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 6 Nov 2023 12:06:54 +0100 Subject: Revert "usb: phy: add usb phy notify port status API" This reverts commit a08799cf17c22375752abfad3b4a2b34b3acb287. The recently added Realtek PHY drivers depend on the new port status notification mechanism which was built on the deprecated USB PHY implementation and devicetree binding. Specifically, using these PHYs would require describing the very same PHY using both the generic "phy" property and the deprecated "usb-phy" property which is clearly wrong. We should not be building new functionality on top of the legacy USB PHY implementation even if it is currently stuck in some kind of transitional limbo. Revert the new notification interface which is broken by design. Fixes: a08799cf17c2 ("usb: phy: add usb phy notify port status API") Cc: stable@vger.kernel.org # 6.6 Cc: Stanley Chang Signed-off-by: Johan Hovold Link: https://lore.kernel.org/r/20231106110654.31090-4-johan+linaro@kernel.org Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hub.c | 23 ----------------------- include/linux/usb/phy.h | 13 ------------- 2 files changed, 36 deletions(-) diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index b4584a0cd484..87480a6e6d93 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -622,29 +622,6 @@ static int hub_ext_port_status(struct usb_hub *hub, int port1, int type, ret = 0; } mutex_unlock(&hub->status_mutex); - - /* - * There is no need to lock status_mutex here, because status_mutex - * protects hub->status, and the phy driver only checks the port - * status without changing the status. - */ - if (!ret) { - struct usb_device *hdev = hub->hdev; - - /* - * Only roothub will be notified of port state changes, - * since the USB PHY only cares about changes at the next - * level. - */ - if (is_root_hub(hdev)) { - struct usb_hcd *hcd = bus_to_hcd(hdev->bus); - - if (hcd->usb_phy) - usb_phy_notify_port_status(hcd->usb_phy, - port1 - 1, *status, *change); - } - } - return ret; } diff --git a/include/linux/usb/phy.h b/include/linux/usb/phy.h index b513749582d7..e4de6bc1f69b 100644 --- a/include/linux/usb/phy.h +++ b/include/linux/usb/phy.h @@ -144,10 +144,6 @@ struct usb_phy { */ int (*set_wakeup)(struct usb_phy *x, bool enabled); - /* notify phy port status change */ - int (*notify_port_status)(struct usb_phy *x, int port, - u16 portstatus, u16 portchange); - /* notify phy connect status change */ int (*notify_connect)(struct usb_phy *x, enum usb_device_speed speed); @@ -320,15 +316,6 @@ usb_phy_set_wakeup(struct usb_phy *x, bool enabled) return 0; } -static inline int -usb_phy_notify_port_status(struct usb_phy *x, int port, u16 portstatus, u16 portchange) -{ - if (x && x->notify_port_status) - return x->notify_port_status(x, port, portstatus, portchange); - else - return 0; -} - static inline int usb_phy_notify_connect(struct usb_phy *x, enum usb_device_speed speed) { -- cgit v1.2.3 From f2c1dba31133233697fc96e808c6005fc304a8e9 Mon Sep 17 00:00:00 2001 From: Len Brown Date: Wed, 28 Jun 2023 09:40:53 -0400 Subject: tools/power/turbostat: bugfix "--show IPC" turbostat --show IPC displays "inf" for the IPC column turbostat was missing the explicit dependency of IPC on APERF, and thus neglected to collect APERF when only IPC was requested. typcial use: turbostat --quiet --show CPU,IPC Signed-off-by: Len Brown --- tools/power/x86/turbostat/turbostat.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c index 8a311d7272e7..5aa6598a40a9 100644 --- a/tools/power/x86/turbostat/turbostat.c +++ b/tools/power/x86/turbostat/turbostat.c @@ -2202,7 +2202,8 @@ int delta_thread(struct thread_data *new, struct thread_data *old, struct core_d old->c1 = new->c1 - old->c1; - if (DO_BIC(BIC_Avg_MHz) || DO_BIC(BIC_Busy) || DO_BIC(BIC_Bzy_MHz) || soft_c1_residency_display(BIC_Avg_MHz)) { + if (DO_BIC(BIC_Avg_MHz) || DO_BIC(BIC_Busy) || DO_BIC(BIC_Bzy_MHz) || DO_BIC(BIC_IPC) + || soft_c1_residency_display(BIC_Avg_MHz)) { if ((new->aperf > old->aperf) && (new->mperf > old->mperf)) { old->aperf = new->aperf - old->aperf; old->mperf = new->mperf - old->mperf; @@ -2724,7 +2725,8 @@ int get_counters(struct thread_data *t, struct core_data *c, struct pkg_data *p) retry: t->tsc = rdtsc(); /* we are running on local CPU of interest */ - if (DO_BIC(BIC_Avg_MHz) || DO_BIC(BIC_Busy) || DO_BIC(BIC_Bzy_MHz) || soft_c1_residency_display(BIC_Avg_MHz)) { + if (DO_BIC(BIC_Avg_MHz) || DO_BIC(BIC_Busy) || DO_BIC(BIC_Bzy_MHz) || DO_BIC(BIC_IPC) + || soft_c1_residency_display(BIC_Avg_MHz)) { unsigned long long tsc_before, tsc_between, tsc_after, aperf_time, mperf_time; /* -- cgit v1.2.3 From b8337e6a780dad9505f9d44da07c0a5c52fa0a04 Mon Sep 17 00:00:00 2001 From: Len Brown Date: Tue, 7 Nov 2023 23:28:30 -0500 Subject: tools/power turbostat: version 2023.11.07 Turbostat features are now table-driven (Rui Zhang) Add support for some new platforms (Sumeet Pawnikar, Rui Zhang) Gracefully run in configs when CPUs are limited (Rui Zhang, Srinivas Pandruvada) misc minor fixes. Signed-off-by: Len Brown --- tools/power/x86/turbostat/turbostat.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c index 5aa6598a40a9..7a334377f92b 100644 --- a/tools/power/x86/turbostat/turbostat.c +++ b/tools/power/x86/turbostat/turbostat.c @@ -6259,7 +6259,7 @@ int get_and_dump_counters(void) void print_version() { - fprintf(outf, "turbostat version 2023.03.17 - Len Brown \n"); + fprintf(outf, "turbostat version 2023.11.07 - Len Brown \n"); } #define COMMAND_LINE_SIZE 2048 -- cgit v1.2.3 From 31255e072b2e91f97645d792d25b2db744186dd1 Mon Sep 17 00:00:00 2001 From: Rick Edgecombe Date: Tue, 7 Nov 2023 10:22:51 -0800 Subject: x86/shstk: Delay signal entry SSP write until after user accesses MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit When a signal is being delivered, the kernel needs to make accesses to userspace. These accesses could encounter an access error, in which case the signal delivery itself will trigger a segfault. Usually this would result in the kernel killing the process. But in the case of a SEGV signal handler being configured, the failure of the first signal delivery will result in *another* signal getting delivered. The second signal may succeed if another thread has resolved the issue that triggered the segfault (i.e. a well timed mprotect()/mmap()), or the second signal is being delivered to another stack (i.e. an alt stack). On x86, in the non-shadow stack case, all the accesses to userspace are done before changes to the registers (in pt_regs). The operation is aborted when an access error occurs, so although there may be writes done for the first signal, control flow changes for the signal (regs->ip, regs->sp, etc) are not committed until all the accesses have already completed successfully. This means that the second signal will be delivered as if it happened at the time of the first signal. It will effectively replace the first aborted signal, overwriting the half-written frame of the aborted signal. So on sigreturn from the second signal, control flow will resume happily from the point of control flow where the original signal was delivered. The problem is, when shadow stack is active, the shadow stack SSP register/MSR is updated *before* some of the userspace accesses. This means if the earlier accesses succeed and the later ones fail, the second signal will not be delivered at the same spot on the shadow stack as the first one. So on sigreturn from the second signal, the SSP will be pointing to the wrong location on the shadow stack (off by a frame). Pengfei privately reported that while using a shadow stack enabled glibc, the “signal06” test in the LTP test-suite hung. It turns out it is testing the above described double signal scenario. When this test was compiled with shadow stack, the first signal pushed a shadow stack sigframe, then the second pushed another. When the second signal was handled, the SSP was at the first shadow stack signal frame instead of the original location. The test then got stuck as the #CP from the twice incremented SSP was incorrect and generated segfaults in a loop. Fix this by adjusting the SSP register only after any userspace accesses, such that there can be no failures after the SSP is adjusted. Do this by moving the shadow stack sigframe push logic to happen after all other userspace accesses. Note, sigreturn (as opposed to the signal delivery dealt with in this patch) has ordering behavior that could lead to similar failures. The ordering issues there extend beyond shadow stack to include the alt stack restoration. Fixing that would require cross-arch changes, and the ordering today does not cause any known test or apps breakages. So leave it as is, for now. [ dhansen: minor changelog/subject tweak ] Fixes: 05e36022c054 ("x86/shstk: Handle signals for shadow stack") Reported-by: Pengfei Xu Signed-off-by: Rick Edgecombe Signed-off-by: Dave Hansen Tested-by: Pengfei Xu Cc:stable@vger.kernel.org Link: https://lore.kernel.org/all/20231107182251.91276-1-rick.p.edgecombe%40intel.com Link: https://github.com/linux-test-project/ltp/blob/master/testcases/kernel/syscalls/signal/signal06.c --- arch/x86/kernel/signal_64.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/x86/kernel/signal_64.c b/arch/x86/kernel/signal_64.c index cacf2ede6217..23d8aaf8d9fd 100644 --- a/arch/x86/kernel/signal_64.c +++ b/arch/x86/kernel/signal_64.c @@ -175,9 +175,6 @@ int x64_setup_rt_frame(struct ksignal *ksig, struct pt_regs *regs) frame = get_sigframe(ksig, regs, sizeof(struct rt_sigframe), &fp); uc_flags = frame_uc_flags(regs); - if (setup_signal_shadow_stack(ksig)) - return -EFAULT; - if (!user_access_begin(frame, sizeof(*frame))) return -EFAULT; @@ -198,6 +195,9 @@ int x64_setup_rt_frame(struct ksignal *ksig, struct pt_regs *regs) return -EFAULT; } + if (setup_signal_shadow_stack(ksig)) + return -EFAULT; + /* Set up registers for signal handler */ regs->di = ksig->sig; /* In case the signal handler was declared without prototypes */ -- cgit v1.2.3 From 7a934b5cc3f452df6f9a4903450fc103dee98ee8 Mon Sep 17 00:00:00 2001 From: Ming Yen Hsieh Date: Mon, 30 Oct 2023 15:17:34 +0800 Subject: wifi: mt76: mt7921: fix 6GHz disabled by the missing default CLC config No matter CLC is enabled or disabled, the driver should initialize the default value 0xff for channel configuration of CLC. Otherwise, the zero value would disable channels. Reported-and-tested-by: Ben Greear Closes: https://lore.kernel.org/all/2fb78387-d226-3193-8ca7-90040561b9ad@candelatech.com/ Fixes: 09382d8f8641 ("wifi: mt76: mt7921: update the channel usage when the regd domain changed") Signed-off-by: Ming Yen Hsieh Signed-off-by: Deren Wu Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/5a976ddf1f636b5cb809373501d3cfdc6d8de3e4.1698648737.git.deren.wu@mediatek.com --- drivers/net/wireless/mediatek/mt76/mt7921/mcu.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/wireless/mediatek/mt76/mt7921/mcu.c b/drivers/net/wireless/mediatek/mt76/mt7921/mcu.c index 63f3d4a5c9aa..2cc2d2788f83 100644 --- a/drivers/net/wireless/mediatek/mt76/mt7921/mcu.c +++ b/drivers/net/wireless/mediatek/mt76/mt7921/mcu.c @@ -375,6 +375,7 @@ static int mt7921_load_clc(struct mt792x_dev *dev, const char *fw_name) int ret, i, len, offset = 0; u8 *clc_base = NULL, hw_encap = 0; + dev->phy.clc_chan_conf = 0xff; if (mt7921_disable_clc || mt76_is_usb(&dev->mt76)) return 0; -- cgit v1.2.3 From 65120498aaf8d7320647a8b6d6de7db42e74ea52 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Wed, 8 Nov 2023 13:58:27 +0100 Subject: stackleak: add declarations for global functions With -Wmissing-prototypes enabled, the stackleak code produces a couple of warnings that have no declarations because they are only called from assembler: stackleak.c:127:25: error: no previous prototype for 'stackleak_erase' [-Werror=missing-prototypes] stackleak.c:139:25: error: no previous prototype for 'stackleak_erase_on_task_stack' [-Werror=missing-prototypes] stackleak.c:151:25: error: no previous prototype for 'stackleak_erase_off_task_stack' [-Werror=missing-prototypes] stackleak.c:159:49: error: no previous prototype for 'stackleak_track_stack' [-Werror=missing-prototypes] Add declarations to the stackleak header to shut up the warnings. Signed-off-by: Arnd Bergmann Link: https://lore.kernel.org/r/20231108125843.3806765-7-arnd@kernel.org Signed-off-by: Kees Cook --- include/linux/stackleak.h | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/include/linux/stackleak.h b/include/linux/stackleak.h index c36e7a3b45e7..3be2cb564710 100644 --- a/include/linux/stackleak.h +++ b/include/linux/stackleak.h @@ -14,6 +14,7 @@ #ifdef CONFIG_GCC_PLUGIN_STACKLEAK #include +#include /* * The lowest address on tsk's stack which we can plausibly erase. @@ -76,6 +77,11 @@ static inline void stackleak_task_init(struct task_struct *t) # endif } +asmlinkage void noinstr stackleak_erase(void); +asmlinkage void noinstr stackleak_erase_on_task_stack(void); +asmlinkage void noinstr stackleak_erase_off_task_stack(void); +void __no_caller_saved_registers noinstr stackleak_track_stack(void); + #else /* !CONFIG_GCC_PLUGIN_STACKLEAK */ static inline void stackleak_task_init(struct task_struct *t) { } #endif -- cgit v1.2.3 From 1ee60356c2dca938362528404af95b8ef3e49b6a Mon Sep 17 00:00:00 2001 From: Kees Cook Date: Sat, 4 Nov 2023 13:43:37 -0700 Subject: gcc-plugins: randstruct: Only warn about true flexible arrays The randstruct GCC plugin tried to discover "fake" flexible arrays to issue warnings about them in randomized structs. In the future LSM overhead reduction series, it would be legal to have a randomized struct with a 1-element array, and this should _not_ be treated as a flexible array, especially since commit df8fc4e934c1 ("kbuild: Enable -fstrict-flex-arrays=3"). Disable the 0-sized and 1-element array discovery logic in the plugin, but keep the "true" flexible array check. Cc: KP Singh Cc: linux-hardening@vger.kernel.org Reported-by: kernel test robot Closes: https://lore.kernel.org/oe-kbuild-all/202311021532.iBwuZUZ0-lkp@intel.com/ Fixes: df8fc4e934c1 ("kbuild: Enable -fstrict-flex-arrays=3") Reviewed-by: Bill Wendling Acked-by: "Gustavo A. R. Silva" Link: https://lore.kernel.org/r/20231104204334.work.160-kees@kernel.org Signed-off-by: Kees Cook --- scripts/gcc-plugins/randomize_layout_plugin.c | 10 ---------- 1 file changed, 10 deletions(-) diff --git a/scripts/gcc-plugins/randomize_layout_plugin.c b/scripts/gcc-plugins/randomize_layout_plugin.c index 366395cab490..910bd21d08f4 100644 --- a/scripts/gcc-plugins/randomize_layout_plugin.c +++ b/scripts/gcc-plugins/randomize_layout_plugin.c @@ -278,8 +278,6 @@ static bool is_flexible_array(const_tree field) { const_tree fieldtype; const_tree typesize; - const_tree elemtype; - const_tree elemsize; fieldtype = TREE_TYPE(field); typesize = TYPE_SIZE(fieldtype); @@ -287,20 +285,12 @@ static bool is_flexible_array(const_tree field) if (TREE_CODE(fieldtype) != ARRAY_TYPE) return false; - elemtype = TREE_TYPE(fieldtype); - elemsize = TYPE_SIZE(elemtype); - /* size of type is represented in bits */ if (typesize == NULL_TREE && TYPE_DOMAIN(fieldtype) != NULL_TREE && TYPE_MAX_VALUE(TYPE_DOMAIN(fieldtype)) == NULL_TREE) return true; - if (typesize != NULL_TREE && - (TREE_CONSTANT(typesize) && (!tree_to_uhwi(typesize) || - tree_to_uhwi(typesize) == tree_to_uhwi(elemsize)))) - return true; - return false; } -- cgit v1.2.3 From 19597cad64d608aa8ac2f8aef50a50187a565223 Mon Sep 17 00:00:00 2001 From: Quinn Tran Date: Mon, 30 Oct 2023 12:19:12 +0530 Subject: scsi: qla2xxx: Fix system crash due to bad pointer access User experiences system crash when running AER error injection. The perturbation causes the abort-all-I/O path to trigger. The driver assumes all I/O on this path is FCP only. If there is both NVMe & FCP traffic, a system crash happens. Add additional check to see if I/O is FCP or not before access. PID: 999019 TASK: ff35d769f24722c0 CPU: 53 COMMAND: "kworker/53:1" 0 [ff3f78b964847b58] machine_kexec at ffffffffae86973d 1 [ff3f78b964847ba8] __crash_kexec at ffffffffae9be29d 2 [ff3f78b964847c70] crash_kexec at ffffffffae9bf528 3 [ff3f78b964847c78] oops_end at ffffffffae8282ab 4 [ff3f78b964847c98] exc_page_fault at ffffffffaf2da502 5 [ff3f78b964847cc0] asm_exc_page_fault at ffffffffaf400b62 [exception RIP: qla2x00_abort_srb+444] RIP: ffffffffc07b5f8c RSP: ff3f78b964847d78 RFLAGS: 00010046 RAX: 0000000000000282 RBX: ff35d74a0195a200 RCX: ff35d76886fd03a0 RDX: 0000000000000001 RSI: ffffffffc07c5ec8 RDI: ff35d74a0195a200 RBP: ff35d76913d22080 R8: ff35d7694d103200 R9: ff35d7694d103200 R10: 0000000100000000 R11: ffffffffb05d6630 R12: 0000000000010000 R13: ff3f78b964847df8 R14: ff35d768d8754000 R15: ff35d768877248e0 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 6 [ff3f78b964847d70] qla2x00_abort_srb at ffffffffc07b5f84 [qla2xxx] 7 [ff3f78b964847de0] __qla2x00_abort_all_cmds at ffffffffc07b6238 [qla2xxx] 8 [ff3f78b964847e38] qla2x00_abort_all_cmds at ffffffffc07ba635 [qla2xxx] 9 [ff3f78b964847e58] qla2x00_terminate_rport_io at ffffffffc08145eb [qla2xxx] 10 [ff3f78b964847e70] fc_terminate_rport_io at ffffffffc045987e [scsi_transport_fc] 11 [ff3f78b964847e88] process_one_work at ffffffffae914f15 12 [ff3f78b964847ed0] worker_thread at ffffffffae9154c0 13 [ff3f78b964847f10] kthread at ffffffffae91c456 14 [ff3f78b964847f50] ret_from_fork at ffffffffae8036ef Cc: stable@vger.kernel.org Fixes: f45bca8c5052 ("scsi: qla2xxx: Fix double scsi_done for abort path") Signed-off-by: Quinn Tran Signed-off-by: Nilesh Javali Link: https://lore.kernel.org/r/20231030064912.37912-1-njavali@marvell.com Signed-off-by: Martin K. Petersen --- drivers/scsi/qla2xxx/qla_os.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index 7e103d711825..d24410944f7d 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -1837,8 +1837,16 @@ static void qla2x00_abort_srb(struct qla_qpair *qp, srb_t *sp, const int res, } spin_lock_irqsave(qp->qp_lock_ptr, *flags); - if (ret_cmd && blk_mq_request_started(scsi_cmd_to_rq(cmd))) - sp->done(sp, res); + switch (sp->type) { + case SRB_SCSI_CMD: + if (ret_cmd && blk_mq_request_started(scsi_cmd_to_rq(cmd))) + sp->done(sp, res); + break; + default: + if (ret_cmd) + sp->done(sp, res); + break; + } } else { sp->done(sp, res); } -- cgit v1.2.3 From defde5a50d91c74e1ce71a7f0bce7fb1ae311d84 Mon Sep 17 00:00:00 2001 From: Naomi Chu Date: Thu, 2 Nov 2023 13:24:24 +0800 Subject: scsi: ufs: core: Expand MCQ queue slot to DeviceQueueDepth + 1 The UFSHCI 4.0 specification mandates that there should always be at least one empty slot in each queue for distinguishing between full and empty states. Enlarge 'hwq->max_entries' to 'DeviceQueueDepth + 1' to allow UFSHCI 4.0 controllers to fully utilize MCQ queue slots. Fixes: 4682abfae2eb ("scsi: ufs: core: mcq: Allocate memory for MCQ mode") Signed-off-by: Naomi Chu Link: https://lore.kernel.org/r/20231102052426.12006-2-naomi.chu@mediatek.com Reviewed-by: Stanley Chu Reviewed-by: Bart Van Assche Reviewed-by: Peter Wang Reviewed-by: Chun-Hung Signed-off-by: Martin K. Petersen --- drivers/ufs/core/ufs-mcq.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/ufs/core/ufs-mcq.c b/drivers/ufs/core/ufs-mcq.c index 2ba8ec254dce..5c75ab9d6bb5 100644 --- a/drivers/ufs/core/ufs-mcq.c +++ b/drivers/ufs/core/ufs-mcq.c @@ -436,7 +436,7 @@ int ufshcd_mcq_init(struct ufs_hba *hba) for (i = 0; i < hba->nr_hw_queues; i++) { hwq = &hba->uhq[i]; - hwq->max_entries = hba->nutrs; + hwq->max_entries = hba->nutrs + 1; spin_lock_init(&hwq->sq_lock); spin_lock_init(&hwq->cq_lock); mutex_init(&hwq->sq_mutex); -- cgit v1.2.3 From 27900d7119c464b43cd9eac69c85884d17bae240 Mon Sep 17 00:00:00 2001 From: Peter Wang Date: Mon, 6 Nov 2023 15:51:17 +0800 Subject: scsi: ufs: core: Fix racing issue between ufshcd_mcq_abort() and ISR If command timeout happens and cq complete IRQ is raised at the same time, ufshcd_mcq_abort clears lprb->cmd and a NULL pointer deref happens in the ISR. Error log: ufshcd_abort: Device abort task at tag 18 Unable to handle kernel NULL pointer dereference at virtual address 0000000000000108 pc : [0xffffffe27ef867ac] scsi_dma_unmap+0xc/0x44 lr : [0xffffffe27f1b898c] ufshcd_release_scsi_cmd+0x24/0x114 Fixes: f1304d442077 ("scsi: ufs: mcq: Added ufshcd_mcq_abort()") Cc: stable@vger.kernel.org Signed-off-by: Peter Wang Link: https://lore.kernel.org/r/20231106075117.8995-1-peter.wang@mediatek.com Reviewed-by: Bart Van Assche Signed-off-by: Martin K. Petersen --- drivers/ufs/core/ufs-mcq.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/ufs/core/ufs-mcq.c b/drivers/ufs/core/ufs-mcq.c index 5c75ab9d6bb5..0787456c2b89 100644 --- a/drivers/ufs/core/ufs-mcq.c +++ b/drivers/ufs/core/ufs-mcq.c @@ -630,6 +630,7 @@ int ufshcd_mcq_abort(struct scsi_cmnd *cmd) int tag = scsi_cmd_to_rq(cmd)->tag; struct ufshcd_lrb *lrbp = &hba->lrb[tag]; struct ufs_hw_queue *hwq; + unsigned long flags; int err = FAILED; if (!ufshcd_cmd_inflight(lrbp->cmd)) { @@ -670,8 +671,10 @@ int ufshcd_mcq_abort(struct scsi_cmnd *cmd) } err = SUCCESS; + spin_lock_irqsave(&hwq->cq_lock, flags); if (ufshcd_cmd_inflight(lrbp->cmd)) ufshcd_release_scsi_cmd(hba, lrbp); + spin_unlock_irqrestore(&hwq->cq_lock, flags); out: return err; -- cgit v1.2.3 From 860c3d03bbc3f17aef8600662c488f27fd093142 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Mon, 6 Nov 2023 17:04:33 +0300 Subject: scsi: scsi_debug: Fix some bugs in sdebug_error_write() There are two bug in this code: 1) If count is zero, then it will lead to a NULL dereference. The kmalloc() will successfully allocate zero bytes and the test for "if (buf[0] == '-')" will read beyond the end of the zero size buffer and Oops. 2) The code does not ensure that the user's string is properly NUL terminated which could lead to a read overflow. Fixes: a9996d722b11 ("scsi: scsi_debug: Add interface to manage error injection for a single device") Signed-off-by: Dan Carpenter Link: https://lore.kernel.org/r/7733643d-e102-4581-8d29-769472011c97@moroto.mountain Reviewed-by: Wenchao Hao Signed-off-by: Martin K. Petersen --- drivers/scsi/scsi_debug.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/scsi_debug.c b/drivers/scsi/scsi_debug.c index 67922e2c4c19..0dd21598f7b6 100644 --- a/drivers/scsi/scsi_debug.c +++ b/drivers/scsi/scsi_debug.c @@ -1019,7 +1019,7 @@ static ssize_t sdebug_error_write(struct file *file, const char __user *ubuf, struct sdebug_err_inject *inject; struct scsi_device *sdev = (struct scsi_device *)file->f_inode->i_private; - buf = kmalloc(count, GFP_KERNEL); + buf = kzalloc(count + 1, GFP_KERNEL); if (!buf) return -ENOMEM; -- cgit v1.2.3 From 037fbd3fcfbd99145f9310d93f6637012807cfd0 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Mon, 6 Nov 2023 17:05:04 +0300 Subject: scsi: scsi_debug: Delete some bogus error checking Smatch complains that "dentry" is never initialized. These days everyone initializes all their stack variables to zero so this means that it will trigger a warning every time this function is run. Really, debugfs functions are not supposed to be checked for errors in normal code. For example, if we updated this code to check the correct variable then it would print a warning if CONFIG_DEBUGFS was disabled. We don't want that. Just delete the check. Fixes: f084fe52c640 ("scsi: scsi_debug: Add debugfs interface to fail target reset") Signed-off-by: Dan Carpenter Link: https://lore.kernel.org/r/c602c9ad-5e35-4e18-a47f-87ed956a9ec2@moroto.mountain Reviewed-by: Wenchao Hao Signed-off-by: Martin K. Petersen --- drivers/scsi/scsi_debug.c | 7 ------- 1 file changed, 7 deletions(-) diff --git a/drivers/scsi/scsi_debug.c b/drivers/scsi/scsi_debug.c index 0dd21598f7b6..6d8218a44122 100644 --- a/drivers/scsi/scsi_debug.c +++ b/drivers/scsi/scsi_debug.c @@ -1132,7 +1132,6 @@ static const struct file_operations sdebug_target_reset_fail_fops = { static int sdebug_target_alloc(struct scsi_target *starget) { struct sdebug_target_info *targetip; - struct dentry *dentry; targetip = kzalloc(sizeof(struct sdebug_target_info), GFP_KERNEL); if (!targetip) @@ -1140,15 +1139,9 @@ static int sdebug_target_alloc(struct scsi_target *starget) targetip->debugfs_entry = debugfs_create_dir(dev_name(&starget->dev), sdebug_debugfs_root); - if (IS_ERR_OR_NULL(targetip->debugfs_entry)) - pr_info("%s: failed to create debugfs directory for target %s\n", - __func__, dev_name(&starget->dev)); debugfs_create_file("fail_reset", 0600, targetip->debugfs_entry, starget, &sdebug_target_reset_fail_fops); - if (IS_ERR_OR_NULL(dentry)) - pr_info("%s: failed to create fail_reset file for target %s\n", - __func__, dev_name(&starget->dev)); starget->hostdata = targetip; -- cgit v1.2.3 From 3b83486399a6a9feb9c681b74c21a227d48d7020 Mon Sep 17 00:00:00 2001 From: Mike Christie Date: Mon, 6 Nov 2023 17:13:04 -0600 Subject: scsi: sd: Fix sshdr use in sd_suspend_common() If scsi_execute_cmd() returns < 0, it doesn't initialize the sshdr, so we shouldn't access the sshdr. If it returns 0, then the cmd executed successfully, so there is no need to check the sshdr. sd_sync_cache() will only access the sshdr if it's been setup because it calls scsi_status_is_check_condition() before accessing it. However, the sd_sync_cache() caller, sd_suspend_common(), does not check. sd_suspend_common() is only checking for ILLEGAL_REQUEST which it's using to determine if the command is supported. If it's not it just ignores the error. So to fix its sshdr use this patch just moves that check to sd_sync_cache() where it converts ILLEGAL_REQUEST to success/0. sd_suspend_common() was ignoring that error and sd_shutdown() doesn't check for errors so there will be no behavior changes. Signed-off-by: Mike Christie Link: https://lore.kernel.org/r/20231106231304.5694-2-michael.christie@oracle.com Reviewed-by: Christoph Hellwig Reviewed-by: Martin Wilck Reviewed-by: Bart Van Assche Signed-off-by: Martin K. Petersen --- drivers/scsi/sd.c | 53 +++++++++++++++++++++++------------------------------ 1 file changed, 23 insertions(+), 30 deletions(-) diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c index 864db30b9c8e..3ef3b00397fe 100644 --- a/drivers/scsi/sd.c +++ b/drivers/scsi/sd.c @@ -1565,24 +1565,21 @@ out: return disk_changed ? DISK_EVENT_MEDIA_CHANGE : 0; } -static int sd_sync_cache(struct scsi_disk *sdkp, struct scsi_sense_hdr *sshdr) +static int sd_sync_cache(struct scsi_disk *sdkp) { int retries, res; struct scsi_device *sdp = sdkp->device; const int timeout = sdp->request_queue->rq_timeout * SD_FLUSH_TIMEOUT_MULTIPLIER; - struct scsi_sense_hdr my_sshdr; + struct scsi_sense_hdr sshdr; const struct scsi_exec_args exec_args = { .req_flags = BLK_MQ_REQ_PM, - /* caller might not be interested in sense, but we need it */ - .sshdr = sshdr ? : &my_sshdr, + .sshdr = &sshdr, }; if (!scsi_device_online(sdp)) return -ENODEV; - sshdr = exec_args.sshdr; - for (retries = 3; retries > 0; --retries) { unsigned char cmd[16] = { 0 }; @@ -1607,15 +1604,23 @@ static int sd_sync_cache(struct scsi_disk *sdkp, struct scsi_sense_hdr *sshdr) return res; if (scsi_status_is_check_condition(res) && - scsi_sense_valid(sshdr)) { - sd_print_sense_hdr(sdkp, sshdr); + scsi_sense_valid(&sshdr)) { + sd_print_sense_hdr(sdkp, &sshdr); /* we need to evaluate the error return */ - if (sshdr->asc == 0x3a || /* medium not present */ - sshdr->asc == 0x20 || /* invalid command */ - (sshdr->asc == 0x74 && sshdr->ascq == 0x71)) /* drive is password locked */ + if (sshdr.asc == 0x3a || /* medium not present */ + sshdr.asc == 0x20 || /* invalid command */ + (sshdr.asc == 0x74 && sshdr.ascq == 0x71)) /* drive is password locked */ /* this is no error here */ return 0; + /* + * This drive doesn't support sync and there's not much + * we can do because this is called during shutdown + * or suspend so just return success so those operations + * can proceed. + */ + if (sshdr.sense_key == ILLEGAL_REQUEST) + return 0; } switch (host_byte(res)) { @@ -3774,7 +3779,7 @@ static void sd_shutdown(struct device *dev) if (sdkp->WCE && sdkp->media_present) { sd_printk(KERN_NOTICE, sdkp, "Synchronizing SCSI cache\n"); - sd_sync_cache(sdkp, NULL); + sd_sync_cache(sdkp); } if (system_state != SYSTEM_RESTART && sdkp->device->manage_start_stop) { @@ -3786,7 +3791,6 @@ static void sd_shutdown(struct device *dev) static int sd_suspend_common(struct device *dev, bool ignore_stop_errors) { struct scsi_disk *sdkp = dev_get_drvdata(dev); - struct scsi_sense_hdr sshdr; int ret = 0; if (!sdkp) /* E.g.: runtime suspend following sd_remove() */ @@ -3795,24 +3799,13 @@ static int sd_suspend_common(struct device *dev, bool ignore_stop_errors) if (sdkp->WCE && sdkp->media_present) { if (!sdkp->device->silence_suspend) sd_printk(KERN_NOTICE, sdkp, "Synchronizing SCSI cache\n"); - ret = sd_sync_cache(sdkp, &sshdr); - - if (ret) { - /* ignore OFFLINE device */ - if (ret == -ENODEV) - return 0; - - if (!scsi_sense_valid(&sshdr) || - sshdr.sense_key != ILLEGAL_REQUEST) - return ret; + ret = sd_sync_cache(sdkp); + /* ignore OFFLINE device */ + if (ret == -ENODEV) + return 0; - /* - * sshdr.sense_key == ILLEGAL_REQUEST means this drive - * doesn't support sync. There's not much to do and - * suspend shouldn't fail. - */ - ret = 0; - } + if (ret) + return ret; } if (sdkp->device->manage_start_stop) { -- cgit v1.2.3 From e439e4a62a8ea3c39d65c546de3af7d1c594077c Mon Sep 17 00:00:00 2001 From: Neil Armstrong Date: Mon, 30 Oct 2023 10:43:11 +0100 Subject: scsi: ufs: qcom-ufs: dt-bindings: Document the SM8650 UFS Controller Document the UFS Controller on the SM8650 Platform. Reviewed-by: Alim Akhtar Reviewed-by: Manivannan Sadhasivam Signed-off-by: Neil Armstrong Link: https://lore.kernel.org/r/20231030-topic-sm8650-upstream-bindings-ufs-v3-1-a96364463fd5@linaro.org Reviewed-by: Krzysztof Kozlowski Signed-off-by: Martin K. Petersen --- Documentation/devicetree/bindings/ufs/qcom,ufs.yaml | 2 ++ 1 file changed, 2 insertions(+) diff --git a/Documentation/devicetree/bindings/ufs/qcom,ufs.yaml b/Documentation/devicetree/bindings/ufs/qcom,ufs.yaml index 462ead5a1cec..2cf3d016db42 100644 --- a/Documentation/devicetree/bindings/ufs/qcom,ufs.yaml +++ b/Documentation/devicetree/bindings/ufs/qcom,ufs.yaml @@ -36,6 +36,7 @@ properties: - qcom,sm8350-ufshc - qcom,sm8450-ufshc - qcom,sm8550-ufshc + - qcom,sm8650-ufshc - const: qcom,ufshc - const: jedec,ufs-2.0 @@ -122,6 +123,7 @@ allOf: - qcom,sm8350-ufshc - qcom,sm8450-ufshc - qcom,sm8550-ufshc + - qcom,sm8650-ufshc then: properties: clocks: -- cgit v1.2.3 From 6c8e69e4a702b072206f166111c003d704de15d9 Mon Sep 17 00:00:00 2001 From: Filipe Manana Date: Fri, 3 Nov 2023 12:26:25 +0000 Subject: btrfs: fix race between accounting qgroup extents and removing a qgroup When doing qgroup accounting for an extent, we take the spinlock fs_info->qgroup_lock and then add qgroups to the local list (iterator) named "qgroups". These qgroups are found in the fs_info->qgroup_tree rbtree. After we're done, we unlock fs_info->qgroup_lock and then call qgroup_iterator_nested_clean(), which will iterate over all the qgroups added to the local list "qgroups" and then delete them from the list. Deleting a qgroup from the list can however result in a use-after-free if a qgroup remove operation happens after we unlock fs_info->qgroup_lock and before or while we are at qgroup_iterator_nested_clean(). Fix this by calling qgroup_iterator_nested_clean() while still holding the lock fs_info->qgroup_lock - we don't need it under the 'out' label since before taking the lock the "qgroups" list is always empty. This guarantees safety because btrfs_remove_qgroup() takes that lock before removing a qgroup from the rbtree fs_info->qgroup_tree. This was reported by syzbot with the following stack traces: BUG: KASAN: slab-use-after-free in __list_del_entry_valid_or_report+0x2f/0x130 lib/list_debug.c:49 Read of size 8 at addr ffff888027e420b0 by task kworker/u4:3/48 CPU: 1 PID: 48 Comm: kworker/u4:3 Not tainted 6.6.0-syzkaller-10396-g4652b8e4f3ff #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/09/2023 Workqueue: btrfs-qgroup-rescan btrfs_work_helper Call Trace: __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x1e7/0x2d0 lib/dump_stack.c:106 print_address_description mm/kasan/report.c:364 [inline] print_report+0x163/0x540 mm/kasan/report.c:475 kasan_report+0x175/0x1b0 mm/kasan/report.c:588 __list_del_entry_valid_or_report+0x2f/0x130 lib/list_debug.c:49 __list_del_entry_valid include/linux/list.h:124 [inline] __list_del_entry include/linux/list.h:215 [inline] list_del_init include/linux/list.h:287 [inline] qgroup_iterator_nested_clean fs/btrfs/qgroup.c:2623 [inline] btrfs_qgroup_account_extent+0x18b/0x1150 fs/btrfs/qgroup.c:2883 qgroup_rescan_leaf fs/btrfs/qgroup.c:3543 [inline] btrfs_qgroup_rescan_worker+0x1078/0x1c60 fs/btrfs/qgroup.c:3604 btrfs_work_helper+0x37c/0xbd0 fs/btrfs/async-thread.c:315 process_one_work kernel/workqueue.c:2630 [inline] process_scheduled_works+0x90f/0x1400 kernel/workqueue.c:2703 worker_thread+0xa5f/0xff0 kernel/workqueue.c:2784 kthread+0x2d3/0x370 kernel/kthread.c:388 ret_from_fork+0x48/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:242 Allocated by task 6355: kasan_save_stack mm/kasan/common.c:45 [inline] kasan_set_track+0x4f/0x70 mm/kasan/common.c:52 ____kasan_kmalloc mm/kasan/common.c:374 [inline] __kasan_kmalloc+0x98/0xb0 mm/kasan/common.c:383 kmalloc include/linux/slab.h:600 [inline] kzalloc include/linux/slab.h:721 [inline] btrfs_quota_enable+0xee9/0x2060 fs/btrfs/qgroup.c:1209 btrfs_ioctl_quota_ctl+0x143/0x190 fs/btrfs/ioctl.c:3705 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:871 [inline] __se_sys_ioctl+0xf8/0x170 fs/ioctl.c:857 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x44/0x110 arch/x86/entry/common.c:82 entry_SYSCALL_64_after_hwframe+0x63/0x6b Freed by task 6355: kasan_save_stack mm/kasan/common.c:45 [inline] kasan_set_track+0x4f/0x70 mm/kasan/common.c:52 kasan_save_free_info+0x28/0x40 mm/kasan/generic.c:522 ____kasan_slab_free+0xd6/0x120 mm/kasan/common.c:236 kasan_slab_free include/linux/kasan.h:164 [inline] slab_free_hook mm/slub.c:1800 [inline] slab_free_freelist_hook mm/slub.c:1826 [inline] slab_free mm/slub.c:3809 [inline] __kmem_cache_free+0x263/0x3a0 mm/slub.c:3822 btrfs_remove_qgroup+0x764/0x8c0 fs/btrfs/qgroup.c:1787 btrfs_ioctl_qgroup_create+0x185/0x1e0 fs/btrfs/ioctl.c:3811 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:871 [inline] __se_sys_ioctl+0xf8/0x170 fs/ioctl.c:857 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x44/0x110 arch/x86/entry/common.c:82 entry_SYSCALL_64_after_hwframe+0x63/0x6b Last potentially related work creation: kasan_save_stack+0x3f/0x60 mm/kasan/common.c:45 __kasan_record_aux_stack+0xad/0xc0 mm/kasan/generic.c:492 __call_rcu_common kernel/rcu/tree.c:2667 [inline] call_rcu+0x167/0xa70 kernel/rcu/tree.c:2781 kthread_worker_fn+0x4ba/0xa90 kernel/kthread.c:823 kthread+0x2d3/0x370 kernel/kthread.c:388 ret_from_fork+0x48/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:242 Second to last potentially related work creation: kasan_save_stack+0x3f/0x60 mm/kasan/common.c:45 __kasan_record_aux_stack+0xad/0xc0 mm/kasan/generic.c:492 __call_rcu_common kernel/rcu/tree.c:2667 [inline] call_rcu+0x167/0xa70 kernel/rcu/tree.c:2781 kthread_worker_fn+0x4ba/0xa90 kernel/kthread.c:823 kthread+0x2d3/0x370 kernel/kthread.c:388 ret_from_fork+0x48/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:242 The buggy address belongs to the object at ffff888027e42000 which belongs to the cache kmalloc-512 of size 512 The buggy address is located 176 bytes inside of freed 512-byte region [ffff888027e42000, ffff888027e42200) The buggy address belongs to the physical page: page:ffffea00009f9000 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x27e40 head:ffffea00009f9000 order:2 entire_mapcount:0 nr_pages_mapped:0 pincount:0 flags: 0xfff00000000840(slab|head|node=0|zone=1|lastcpupid=0x7ff) page_type: 0xffffffff() raw: 00fff00000000840 ffff888012c41c80 ffffea0000a5ba00 dead000000000002 raw: 0000000000000000 0000000080100010 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected page_owner tracks the page as allocated page last allocated via order 2, migratetype Unmovable, gfp_mask 0xd20c0(__GFP_IO|__GFP_FS|__GFP_NOWARN|__GFP_NORETRY|__GFP_COMP|__GFP_NOMEMALLOC), pid 4514, tgid 4514 (udevadm), ts 24598439480, free_ts 23755696267 set_page_owner include/linux/page_owner.h:31 [inline] post_alloc_hook+0x1e6/0x210 mm/page_alloc.c:1536 prep_new_page mm/page_alloc.c:1543 [inline] get_page_from_freelist+0x31db/0x3360 mm/page_alloc.c:3170 __alloc_pages+0x255/0x670 mm/page_alloc.c:4426 alloc_slab_page+0x6a/0x160 mm/slub.c:1870 allocate_slab mm/slub.c:2017 [inline] new_slab+0x84/0x2f0 mm/slub.c:2070 ___slab_alloc+0xc85/0x1310 mm/slub.c:3223 __slab_alloc mm/slub.c:3322 [inline] __slab_alloc_node mm/slub.c:3375 [inline] slab_alloc_node mm/slub.c:3468 [inline] __kmem_cache_alloc_node+0x19d/0x270 mm/slub.c:3517 kmalloc_trace+0x2a/0xe0 mm/slab_common.c:1098 kmalloc include/linux/slab.h:600 [inline] kzalloc include/linux/slab.h:721 [inline] kernfs_fop_open+0x3e7/0xcc0 fs/kernfs/file.c:670 do_dentry_open+0x8fd/0x1590 fs/open.c:948 do_open fs/namei.c:3622 [inline] path_openat+0x2845/0x3280 fs/namei.c:3779 do_filp_open+0x234/0x490 fs/namei.c:3809 do_sys_openat2+0x13e/0x1d0 fs/open.c:1440 do_sys_open fs/open.c:1455 [inline] __do_sys_openat fs/open.c:1471 [inline] __se_sys_openat fs/open.c:1466 [inline] __x64_sys_openat+0x247/0x290 fs/open.c:1466 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x44/0x110 arch/x86/entry/common.c:82 entry_SYSCALL_64_after_hwframe+0x63/0x6b page last free stack trace: reset_page_owner include/linux/page_owner.h:24 [inline] free_pages_prepare mm/page_alloc.c:1136 [inline] free_unref_page_prepare+0x8c3/0x9f0 mm/page_alloc.c:2312 free_unref_page+0x37/0x3f0 mm/page_alloc.c:2405 discard_slab mm/slub.c:2116 [inline] __unfreeze_partials+0x1dc/0x220 mm/slub.c:2655 put_cpu_partial+0x17b/0x250 mm/slub.c:2731 __slab_free+0x2b6/0x390 mm/slub.c:3679 qlink_free mm/kasan/quarantine.c:166 [inline] qlist_free_all+0x75/0xe0 mm/kasan/quarantine.c:185 kasan_quarantine_reduce+0x14b/0x160 mm/kasan/quarantine.c:292 __kasan_slab_alloc+0x23/0x70 mm/kasan/common.c:305 kasan_slab_alloc include/linux/kasan.h:188 [inline] slab_post_alloc_hook+0x67/0x3d0 mm/slab.h:762 slab_alloc_node mm/slub.c:3478 [inline] slab_alloc mm/slub.c:3486 [inline] __kmem_cache_alloc_lru mm/slub.c:3493 [inline] kmem_cache_alloc+0x104/0x2c0 mm/slub.c:3502 getname_flags+0xbc/0x4f0 fs/namei.c:140 do_sys_openat2+0xd2/0x1d0 fs/open.c:1434 do_sys_open fs/open.c:1455 [inline] __do_sys_openat fs/open.c:1471 [inline] __se_sys_openat fs/open.c:1466 [inline] __x64_sys_openat+0x247/0x290 fs/open.c:1466 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x44/0x110 arch/x86/entry/common.c:82 entry_SYSCALL_64_after_hwframe+0x63/0x6b Memory state around the buggy address: ffff888027e41f80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff888027e42000: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff888027e42080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff888027e42100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff888027e42180: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb Reported-by: syzbot+e0b615318f8fcfc01ceb@syzkaller.appspotmail.com Fixes: dce28769a33a ("btrfs: qgroup: use qgroup_iterator_nested to in qgroup_update_refcnt()") CC: stable@vger.kernel.org # 6.6 Link: https://lore.kernel.org/linux-btrfs/00000000000091a5b2060936bf6d@google.com/ Reviewed-by: Josef Bacik Reviewed-by: Qu Wenruo Signed-off-by: Filipe Manana Signed-off-by: David Sterba --- fs/btrfs/qgroup.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/fs/btrfs/qgroup.c b/fs/btrfs/qgroup.c index edb84cc03237..e48eba7e9379 100644 --- a/fs/btrfs/qgroup.c +++ b/fs/btrfs/qgroup.c @@ -2874,13 +2874,19 @@ int btrfs_qgroup_account_extent(struct btrfs_trans_handle *trans, u64 bytenr, qgroup_update_counters(fs_info, &qgroups, nr_old_roots, nr_new_roots, num_bytes, seq); + /* + * We're done using the iterator, release all its qgroups while holding + * fs_info->qgroup_lock so that we don't race with btrfs_remove_qgroup() + * and trigger use-after-free accesses to qgroups. + */ + qgroup_iterator_nested_clean(&qgroups); + /* * Bump qgroup_seq to avoid seq overlap */ fs_info->qgroup_seq += max(nr_old_roots, nr_new_roots) + 1; spin_unlock(&fs_info->qgroup_lock); out_free: - qgroup_iterator_nested_clean(&qgroups); ulist_free(old_roots); ulist_free(new_roots); return ret; -- cgit v1.2.3 From 609d99379736aa6c5b0658654084198aa808035a Mon Sep 17 00:00:00 2001 From: Filipe Manana Date: Mon, 6 Nov 2023 20:17:37 +0000 Subject: btrfs: fix qgroup record leaks when using simple quotas When using simple quotas we are not supposed to allocate qgroup records when adding delayed references. However we allocate them if either mode of quotas is enabled (the new simple one or the old one), but then we never free them because running the accounting, which frees the records, is only run when using the old quotas (at btrfs_qgroup_account_extents()), resulting in a memory leak of the records allocated when adding delayed references. Fix this by allocating the records only if the old quotas mode is enabled. Also fix btrfs_qgroup_trace_extent_nolock() to return 1 if the old quotas mode is not enabled - meaning the caller has to free the record. Fixes: 182940f4f4db ("btrfs: qgroup: add new quota mode for simple quotas") Reported-by: syzbot+d3ddc6dcc6386dea398b@syzkaller.appspotmail.com Link: https://lore.kernel.org/linux-btrfs/00000000000004769106097f9a34@google.com/ Reviewed-by: Qu Wenruo Signed-off-by: Filipe Manana Signed-off-by: David Sterba --- fs/btrfs/delayed-ref.c | 4 ++-- fs/btrfs/qgroup.c | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/fs/btrfs/delayed-ref.c b/fs/btrfs/delayed-ref.c index 9223934d95f4..891ea2fa263c 100644 --- a/fs/btrfs/delayed-ref.c +++ b/fs/btrfs/delayed-ref.c @@ -1041,7 +1041,7 @@ int btrfs_add_delayed_tree_ref(struct btrfs_trans_handle *trans, return -ENOMEM; } - if (btrfs_qgroup_enabled(fs_info) && !generic_ref->skip_qgroup) { + if (btrfs_qgroup_full_accounting(fs_info) && !generic_ref->skip_qgroup) { record = kzalloc(sizeof(*record), GFP_NOFS); if (!record) { kmem_cache_free(btrfs_delayed_tree_ref_cachep, ref); @@ -1144,7 +1144,7 @@ int btrfs_add_delayed_data_ref(struct btrfs_trans_handle *trans, return -ENOMEM; } - if (btrfs_qgroup_enabled(fs_info) && !generic_ref->skip_qgroup) { + if (btrfs_qgroup_full_accounting(fs_info) && !generic_ref->skip_qgroup) { record = kzalloc(sizeof(*record), GFP_NOFS); if (!record) { kmem_cache_free(btrfs_delayed_data_ref_cachep, ref); diff --git a/fs/btrfs/qgroup.c b/fs/btrfs/qgroup.c index e48eba7e9379..ce446d9d7f23 100644 --- a/fs/btrfs/qgroup.c +++ b/fs/btrfs/qgroup.c @@ -1888,7 +1888,7 @@ int btrfs_qgroup_trace_extent_nolock(struct btrfs_fs_info *fs_info, u64 bytenr = record->bytenr; if (!btrfs_qgroup_full_accounting(fs_info)) - return 0; + return 1; lockdep_assert_held(&delayed_refs->lock); trace_btrfs_qgroup_trace_extent(fs_info, record); -- cgit v1.2.3 From d3933152442b7f94419e9ea71835d71b620baf0e Mon Sep 17 00:00:00 2001 From: Boris Burkov Date: Fri, 3 Nov 2023 11:38:04 -0700 Subject: btrfs: make OWNER_REF_KEY type value smallest among inline refs BTRFS_EXTENT_OWNER_REF_KEY is the type of simple quotas extent owner refs. This special inline ref goes in front of all other inline refs. In general, inline refs have a required sorted order s.t. type never decreases (among other requirements). This was recently reified into a tree-checker and fsck rule, which broke simple quotas. To be fair, though, in a sense, the new owner ref item had also violated that not yet fully enforced requirement. This fix brings the owner ref item into compliance with the requirement that inline ref type never decrease. btrfs/301 exercises this behavior and should pass again with this fix. Fixes: d9a620f77e33 ("btrfs: new inline ref storing owning subvol of data extents") Signed-off-by: Boris Burkov Reviewed-by: David Sterba Signed-off-by: David Sterba --- include/uapi/linux/btrfs_tree.h | 24 ++++++++++++++++-------- 1 file changed, 16 insertions(+), 8 deletions(-) diff --git a/include/uapi/linux/btrfs_tree.h b/include/uapi/linux/btrfs_tree.h index c25fc9614594..d24e8e121507 100644 --- a/include/uapi/linux/btrfs_tree.h +++ b/include/uapi/linux/btrfs_tree.h @@ -219,6 +219,22 @@ */ #define BTRFS_METADATA_ITEM_KEY 169 +/* + * Special inline ref key which stores the id of the subvolume which originally + * created the extent. This subvolume owns the extent permanently from the + * perspective of simple quotas. Needed to know which subvolume to free quota + * usage from when the extent is deleted. + * + * Stored as an inline ref rather to avoid wasting space on a separate item on + * top of the existing extent item. However, unlike the other inline refs, + * there is one one owner ref per extent rather than one per extent. + * + * Because of this, it goes at the front of the list of inline refs, and thus + * must have a lower type value than any other inline ref type (to satisfy the + * disk format rule that inline refs have non-decreasing type). + */ +#define BTRFS_EXTENT_OWNER_REF_KEY 172 + #define BTRFS_TREE_BLOCK_REF_KEY 176 #define BTRFS_EXTENT_DATA_REF_KEY 178 @@ -233,14 +249,6 @@ #define BTRFS_SHARED_DATA_REF_KEY 184 -/* - * Special inline ref key which stores the id of the subvolume which originally - * created the extent. This subvolume owns the extent permanently from the - * perspective of simple quotas. Needed to know which subvolume to free quota - * usage from when the extent is deleted. - */ -#define BTRFS_EXTENT_OWNER_REF_KEY 188 - /* * block groups give us hints into the extent allocation trees. Which * blocks are free etc etc -- cgit v1.2.3 From ec9aedb2aa1ab7ac420c00b31f5edc5be15ec167 Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Mon, 3 Jul 2023 00:28:02 +0800 Subject: x86/acpi: Ignore invalid x2APIC entries Currently, the kernel enumerates the possible CPUs by parsing both ACPI MADT Local APIC entries and x2APIC entries. So CPUs with "valid" APIC IDs, even if they have duplicated APIC IDs in Local APIC and x2APIC, are always enumerated. Below is what ACPI MADT Local APIC and x2APIC describes on an Ivebridge-EP system, [02Ch 0044 1] Subtable Type : 00 [Processor Local APIC] [02Fh 0047 1] Local Apic ID : 00 ... [164h 0356 1] Subtable Type : 00 [Processor Local APIC] [167h 0359 1] Local Apic ID : 39 [16Ch 0364 1] Subtable Type : 00 [Processor Local APIC] [16Fh 0367 1] Local Apic ID : FF ... [3ECh 1004 1] Subtable Type : 09 [Processor Local x2APIC] [3F0h 1008 4] Processor x2Apic ID : 00000000 ... [B5Ch 2908 1] Subtable Type : 09 [Processor Local x2APIC] [B60h 2912 4] Processor x2Apic ID : 00000077 As a result, kernel shows "smpboot: Allowing 168 CPUs, 120 hotplug CPUs". And this wastes significant amount of memory for the per-cpu data. Plus this also breaks https://lore.kernel.org/all/87edm36qqb.ffs@tglx/, because __max_logical_packages is over-estimated by the APIC IDs in the x2APIC entries. According to https://uefi.org/specs/ACPI/6.5/05_ACPI_Software_Programming_Model.html#processor-local-x2apic-structure: "[Compatibility note] On some legacy OSes, Logical processors with APIC ID values less than 255 (whether in XAPIC or X2APIC mode) must use the Processor Local APIC structure to convey their APIC information to OSPM, and those processors must be declared in the DSDT using the Processor() keyword. Logical processors with APIC ID values 255 and greater must use the Processor Local x2APIC structure and be declared using the Device() keyword." Therefore prevent the registration of x2APIC entries with an APIC ID less than 255 if the local APIC table enumerates valid APIC IDs. [ tglx: Simplify the logic ] Signed-off-by: Zhang Rui Signed-off-by: Thomas Gleixner Tested-by: Peter Zijlstra Link: https://lore.kernel.org/r/20230702162802.344176-1-rui.zhang@intel.com --- arch/x86/kernel/acpi/boot.c | 34 +++++++++++++++------------------- 1 file changed, 15 insertions(+), 19 deletions(-) diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c index c55c0ef47a18..fc5bce1b5047 100644 --- a/arch/x86/kernel/acpi/boot.c +++ b/arch/x86/kernel/acpi/boot.c @@ -63,6 +63,7 @@ int acpi_fix_pin2_polarity __initdata; #ifdef CONFIG_X86_LOCAL_APIC static u64 acpi_lapic_addr __initdata = APIC_DEFAULT_PHYS_BASE; +static bool has_lapic_cpus __initdata; static bool acpi_support_online_capable; #endif @@ -232,6 +233,14 @@ acpi_parse_x2apic(union acpi_subtable_headers *header, const unsigned long end) if (!acpi_is_processor_usable(processor->lapic_flags)) return 0; + /* + * According to https://uefi.org/specs/ACPI/6.5/05_ACPI_Software_Programming_Model.html#processor-local-x2apic-structure + * when MADT provides both valid LAPIC and x2APIC entries, the APIC ID + * in x2APIC must be equal or greater than 0xff. + */ + if (has_lapic_cpus && apic_id < 0xff) + return 0; + /* * We need to register disabled CPU as well to permit * counting disabled CPUs. This allows us to size @@ -1114,10 +1123,7 @@ static int __init early_acpi_parse_madt_lapic_addr_ovr(void) static int __init acpi_parse_madt_lapic_entries(void) { - int count; - int x2count = 0; - int ret; - struct acpi_subtable_proc madt_proc[2]; + int count, x2count = 0; if (!boot_cpu_has(X86_FEATURE_APIC)) return -ENODEV; @@ -1126,21 +1132,11 @@ static int __init acpi_parse_madt_lapic_entries(void) acpi_parse_sapic, MAX_LOCAL_APIC); if (!count) { - memset(madt_proc, 0, sizeof(madt_proc)); - madt_proc[0].id = ACPI_MADT_TYPE_LOCAL_APIC; - madt_proc[0].handler = acpi_parse_lapic; - madt_proc[1].id = ACPI_MADT_TYPE_LOCAL_X2APIC; - madt_proc[1].handler = acpi_parse_x2apic; - ret = acpi_table_parse_entries_array(ACPI_SIG_MADT, - sizeof(struct acpi_table_madt), - madt_proc, ARRAY_SIZE(madt_proc), MAX_LOCAL_APIC); - if (ret < 0) { - pr_err("Error parsing LAPIC/X2APIC entries\n"); - return ret; - } - - count = madt_proc[0].count; - x2count = madt_proc[1].count; + count = acpi_table_parse_madt(ACPI_MADT_TYPE_LOCAL_APIC, + acpi_parse_lapic, MAX_LOCAL_APIC); + has_lapic_cpus = count > 0; + x2count = acpi_table_parse_madt(ACPI_MADT_TYPE_LOCAL_X2APIC, + acpi_parse_x2apic, MAX_LOCAL_APIC); } if (!count && !x2count) { pr_err("No LAPIC entries present\n"); -- cgit v1.2.3 From 8f51593cdcab82fb23ef2e1a0010b2e6f99aae02 Mon Sep 17 00:00:00 2001 From: "Nícolas F. R. A. Prado" Date: Tue, 7 Nov 2023 17:55:28 -0500 Subject: dt: dt-extract-compatibles: Don't follow symlinks when walking tree MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The iglob function, which we use to find C source files in the kernel tree, always follows symbolic links. This can cause unintentional recursions whenever a symbolic link points to a parent directory. A common scenario is building the kernel with the output set to a directory inside the kernel tree, which will contain such a symlink. Instead of using the iglob function, use os.walk to traverse the directory tree, which by default doesn't follow symbolic links. fnmatch is then used to match the glob on the filename, as well as ignore hidden files (which were ignored by default with iglob). This approach runs just as fast as using iglob. Fixes: b6acf8073517 ("dt: Add a check for undocumented compatible strings in kernel") Reported-by: Aishwarya TCV Closes: https://lore.kernel.org/all/e90cb52f-d55b-d3ba-3933-6cc7b43fcfbc@arm.com Signed-off-by: "Nícolas F. R. A. Prado" Link: https://lore.kernel.org/r/20231107225624.9811-1-nfraprado@collabora.com Signed-off-by: Rob Herring --- scripts/dtc/dt-extract-compatibles | 14 ++++++++++++-- 1 file changed, 12 insertions(+), 2 deletions(-) diff --git a/scripts/dtc/dt-extract-compatibles b/scripts/dtc/dt-extract-compatibles index bd07477dd144..5ffb2364409b 100755 --- a/scripts/dtc/dt-extract-compatibles +++ b/scripts/dtc/dt-extract-compatibles @@ -1,8 +1,8 @@ #!/usr/bin/env python3 # SPDX-License-Identifier: GPL-2.0-only +import fnmatch import os -import glob import re import argparse @@ -81,10 +81,20 @@ def print_compat(filename, compatibles): else: print(*compatibles, sep='\n') +def glob_without_symlinks(root, glob): + for path, dirs, files in os.walk(root): + # Ignore hidden directories + for d in dirs: + if fnmatch.fnmatch(d, ".*"): + dirs.remove(d) + for f in files: + if fnmatch.fnmatch(f, glob): + yield os.path.join(path, f) + def files_to_parse(path_args): for f in path_args: if os.path.isdir(f): - for filename in glob.iglob(f + "/**/*.c", recursive=True): + for filename in glob_without_symlinks(f, "*.c"): yield filename else: yield f -- cgit v1.2.3 From fe69a1b1b6ed9ffc2c578c63f526026a8ab74f0c Mon Sep 17 00:00:00 2001 From: Anders Roxell Date: Thu, 9 Nov 2023 18:43:28 +0100 Subject: selftests: bpf: xskxceiver: ksft_print_msg: fix format type error Crossbuilding selftests/bpf for architecture arm64, format specifies type error show up like. xskxceiver.c:912:34: error: format specifies type 'int' but the argument has type '__u64' (aka 'unsigned long long') [-Werror,-Wformat] ksft_print_msg("[%s] expected meta_count [%d], got meta_count [%d]\n", ~~ %llu __func__, pkt->pkt_nb, meta->count); ^~~~~~~~~~~ xskxceiver.c:929:55: error: format specifies type 'unsigned long long' but the argument has type 'u64' (aka 'unsigned long') [-Werror,-Wformat] ksft_print_msg("Frag invalid addr: %llx len: %u\n", addr, len); ~~~~ ^~~~ Fixing the issues by casting to (unsigned long long) and changing the specifiers to be %llu from %d and %u, since with u64s it might be %llx or %lx, depending on architecture. Signed-off-by: Anders Roxell Link: https://lore.kernel.org/r/20231109174328.1774571-1-anders.roxell@linaro.org Signed-off-by: Alexei Starovoitov --- tools/testing/selftests/bpf/xskxceiver.c | 19 ++++++++++++------- 1 file changed, 12 insertions(+), 7 deletions(-) diff --git a/tools/testing/selftests/bpf/xskxceiver.c b/tools/testing/selftests/bpf/xskxceiver.c index 591ca9637b23..b604c570309a 100644 --- a/tools/testing/selftests/bpf/xskxceiver.c +++ b/tools/testing/selftests/bpf/xskxceiver.c @@ -908,8 +908,9 @@ static bool is_metadata_correct(struct pkt *pkt, void *buffer, u64 addr) struct xdp_info *meta = data - sizeof(struct xdp_info); if (meta->count != pkt->pkt_nb) { - ksft_print_msg("[%s] expected meta_count [%d], got meta_count [%d]\n", - __func__, pkt->pkt_nb, meta->count); + ksft_print_msg("[%s] expected meta_count [%d], got meta_count [%llu]\n", + __func__, pkt->pkt_nb, + (unsigned long long)meta->count); return false; } @@ -926,11 +927,13 @@ static bool is_frag_valid(struct xsk_umem_info *umem, u64 addr, u32 len, u32 exp if (addr >= umem->num_frames * umem->frame_size || addr + len > umem->num_frames * umem->frame_size) { - ksft_print_msg("Frag invalid addr: %llx len: %u\n", addr, len); + ksft_print_msg("Frag invalid addr: %llx len: %u\n", + (unsigned long long)addr, len); return false; } if (!umem->unaligned_mode && addr % umem->frame_size + len > umem->frame_size) { - ksft_print_msg("Frag crosses frame boundary addr: %llx len: %u\n", addr, len); + ksft_print_msg("Frag crosses frame boundary addr: %llx len: %u\n", + (unsigned long long)addr, len); return false; } @@ -1029,7 +1032,8 @@ static int complete_pkts(struct xsk_socket_info *xsk, int batch_size) u64 addr = *xsk_ring_cons__comp_addr(&xsk->umem->cq, idx + rcvd - 1); ksft_print_msg("[%s] Too many packets completed\n", __func__); - ksft_print_msg("Last completion address: %llx\n", addr); + ksft_print_msg("Last completion address: %llx\n", + (unsigned long long)addr); return TEST_FAILURE; } @@ -1513,8 +1517,9 @@ static int validate_tx_invalid_descs(struct ifobject *ifobject) } if (stats.tx_invalid_descs != ifobject->xsk->pkt_stream->nb_pkts / 2) { - ksft_print_msg("[%s] tx_invalid_descs incorrect. Got [%u] expected [%u]\n", - __func__, stats.tx_invalid_descs, + ksft_print_msg("[%s] tx_invalid_descs incorrect. Got [%llu] expected [%u]\n", + __func__, + (unsigned long long)stats.tx_invalid_descs, ifobject->xsk->pkt_stream->nb_pkts); return TEST_FAILURE; } -- cgit v1.2.3 From 3feb263bb516ee7e1da0acd22b15afbb9a7daa19 Mon Sep 17 00:00:00 2001 From: Andrii Nakryiko Date: Thu, 9 Nov 2023 16:26:36 -0800 Subject: bpf: handle ldimm64 properly in check_cfg() ldimm64 instructions are 16-byte long, and so have to be handled appropriately in check_cfg(), just like the rest of BPF verifier does. This has implications in three places: - when determining next instruction for non-jump instructions; - when determining next instruction for callback address ldimm64 instructions (in visit_func_call_insn()); - when checking for unreachable instructions, where second half of ldimm64 is expected to be unreachable; We take this also as an opportunity to report jump into the middle of ldimm64. And adjust few test_verifier tests accordingly. Acked-by: Eduard Zingerman Reported-by: Hao Sun Fixes: 475fb78fbf48 ("bpf: verifier (add branch/goto checks)") Signed-off-by: Andrii Nakryiko Link: https://lore.kernel.org/r/20231110002638.4168352-2-andrii@kernel.org Signed-off-by: Alexei Starovoitov --- include/linux/bpf.h | 8 ++++++-- kernel/bpf/verifier.c | 27 ++++++++++++++++++------- tools/testing/selftests/bpf/verifier/ld_imm64.c | 8 ++++---- 3 files changed, 30 insertions(+), 13 deletions(-) diff --git a/include/linux/bpf.h b/include/linux/bpf.h index b4825d3cdb29..35bff17396c0 100644 --- a/include/linux/bpf.h +++ b/include/linux/bpf.h @@ -909,10 +909,14 @@ bpf_ctx_record_field_size(struct bpf_insn_access_aux *aux, u32 size) aux->ctx_field_size = size; } +static bool bpf_is_ldimm64(const struct bpf_insn *insn) +{ + return insn->code == (BPF_LD | BPF_IMM | BPF_DW); +} + static inline bool bpf_pseudo_func(const struct bpf_insn *insn) { - return insn->code == (BPF_LD | BPF_IMM | BPF_DW) && - insn->src_reg == BPF_PSEUDO_FUNC; + return bpf_is_ldimm64(insn) && insn->src_reg == BPF_PSEUDO_FUNC; } struct bpf_prog_ops { diff --git a/kernel/bpf/verifier.c b/kernel/bpf/verifier.c index bd1c42eb540f..b87715b364fd 100644 --- a/kernel/bpf/verifier.c +++ b/kernel/bpf/verifier.c @@ -15439,15 +15439,16 @@ static int visit_func_call_insn(int t, struct bpf_insn *insns, struct bpf_verifier_env *env, bool visit_callee) { - int ret; + int ret, insn_sz; - ret = push_insn(t, t + 1, FALLTHROUGH, env, false); + insn_sz = bpf_is_ldimm64(&insns[t]) ? 2 : 1; + ret = push_insn(t, t + insn_sz, FALLTHROUGH, env, false); if (ret) return ret; - mark_prune_point(env, t + 1); + mark_prune_point(env, t + insn_sz); /* when we exit from subprog, we need to record non-linear history */ - mark_jmp_point(env, t + 1); + mark_jmp_point(env, t + insn_sz); if (visit_callee) { mark_prune_point(env, t); @@ -15469,15 +15470,17 @@ static int visit_func_call_insn(int t, struct bpf_insn *insns, static int visit_insn(int t, struct bpf_verifier_env *env) { struct bpf_insn *insns = env->prog->insnsi, *insn = &insns[t]; - int ret, off; + int ret, off, insn_sz; if (bpf_pseudo_func(insn)) return visit_func_call_insn(t, insns, env, true); /* All non-branch instructions have a single fall-through edge. */ if (BPF_CLASS(insn->code) != BPF_JMP && - BPF_CLASS(insn->code) != BPF_JMP32) - return push_insn(t, t + 1, FALLTHROUGH, env, false); + BPF_CLASS(insn->code) != BPF_JMP32) { + insn_sz = bpf_is_ldimm64(insn) ? 2 : 1; + return push_insn(t, t + insn_sz, FALLTHROUGH, env, false); + } switch (BPF_OP(insn->code)) { case BPF_EXIT: @@ -15607,11 +15610,21 @@ walk_cfg: } for (i = 0; i < insn_cnt; i++) { + struct bpf_insn *insn = &env->prog->insnsi[i]; + if (insn_state[i] != EXPLORED) { verbose(env, "unreachable insn %d\n", i); ret = -EINVAL; goto err_free; } + if (bpf_is_ldimm64(insn)) { + if (insn_state[i + 1] != 0) { + verbose(env, "jump into the middle of ldimm64 insn %d\n", i); + ret = -EINVAL; + goto err_free; + } + i++; /* skip second half of ldimm64 */ + } } ret = 0; /* cfg looks good */ diff --git a/tools/testing/selftests/bpf/verifier/ld_imm64.c b/tools/testing/selftests/bpf/verifier/ld_imm64.c index f9297900cea6..78f19c255f20 100644 --- a/tools/testing/selftests/bpf/verifier/ld_imm64.c +++ b/tools/testing/selftests/bpf/verifier/ld_imm64.c @@ -9,8 +9,8 @@ BPF_MOV64_IMM(BPF_REG_0, 2), BPF_EXIT_INSN(), }, - .errstr = "invalid BPF_LD_IMM insn", - .errstr_unpriv = "R1 pointer comparison", + .errstr = "jump into the middle of ldimm64 insn 1", + .errstr_unpriv = "jump into the middle of ldimm64 insn 1", .result = REJECT, }, { @@ -23,8 +23,8 @@ BPF_LD_IMM64(BPF_REG_0, 1), BPF_EXIT_INSN(), }, - .errstr = "invalid BPF_LD_IMM insn", - .errstr_unpriv = "R1 pointer comparison", + .errstr = "jump into the middle of ldimm64 insn 1", + .errstr_unpriv = "jump into the middle of ldimm64 insn 1", .result = REJECT, }, { -- cgit v1.2.3 From 4bb7ea946a370707315ab774432963ce47291946 Mon Sep 17 00:00:00 2001 From: Andrii Nakryiko Date: Thu, 9 Nov 2023 16:26:37 -0800 Subject: bpf: fix precision backtracking instruction iteration Fix an edge case in __mark_chain_precision() which prematurely stops backtracking instructions in a state if it happens that state's first and last instruction indexes are the same. This situations doesn't necessarily mean that there were no instructions simulated in a state, but rather that we starting from the instruction, jumped around a bit, and then ended up at the same instruction before checkpointing or marking precision. To distinguish between these two possible situations, we need to consult jump history. If it's empty or contain a single record "bridging" parent state and first instruction of processed state, then we indeed backtracked all instructions in this state. But if history is not empty, we are definitely not done yet. Move this logic inside get_prev_insn_idx() to contain it more nicely. Use -ENOENT return code to denote "we are out of instructions" situation. This bug was exposed by verifier_loop1.c's bounded_recursion subtest, once the next fix in this patch set is applied. Acked-by: Eduard Zingerman Fixes: b5dc0163d8fd ("bpf: precise scalar_value tracking") Signed-off-by: Andrii Nakryiko Link: https://lore.kernel.org/r/20231110002638.4168352-3-andrii@kernel.org Signed-off-by: Alexei Starovoitov --- kernel/bpf/verifier.c | 21 +++++++++++++++++++-- 1 file changed, 19 insertions(+), 2 deletions(-) diff --git a/kernel/bpf/verifier.c b/kernel/bpf/verifier.c index b87715b364fd..484c742f733e 100644 --- a/kernel/bpf/verifier.c +++ b/kernel/bpf/verifier.c @@ -3516,12 +3516,29 @@ static int push_jmp_history(struct bpf_verifier_env *env, /* Backtrack one insn at a time. If idx is not at the top of recorded * history then previous instruction came from straight line execution. + * Return -ENOENT if we exhausted all instructions within given state. + * + * It's legal to have a bit of a looping with the same starting and ending + * insn index within the same state, e.g.: 3->4->5->3, so just because current + * instruction index is the same as state's first_idx doesn't mean we are + * done. If there is still some jump history left, we should keep going. We + * need to take into account that we might have a jump history between given + * state's parent and itself, due to checkpointing. In this case, we'll have + * history entry recording a jump from last instruction of parent state and + * first instruction of given state. */ static int get_prev_insn_idx(struct bpf_verifier_state *st, int i, u32 *history) { u32 cnt = *history; + if (i == st->first_insn_idx) { + if (cnt == 0) + return -ENOENT; + if (cnt == 1 && st->jmp_history[0].idx == i) + return -ENOENT; + } + if (cnt && st->jmp_history[cnt - 1].idx == i) { i = st->jmp_history[cnt - 1].prev_idx; (*history)--; @@ -4401,10 +4418,10 @@ static int __mark_chain_precision(struct bpf_verifier_env *env, int regno) * Nothing to be tracked further in the parent state. */ return 0; - if (i == first_idx) - break; subseq_idx = i; i = get_prev_insn_idx(st, i, &history); + if (i == -ENOENT) + break; if (i >= env->prog->len) { /* This can happen if backtracking reached insn 0 * and there are still reg_mask or stack_mask -- cgit v1.2.3 From 62ccdb11d3c63dc697dea1fd92b3496fe43dcc1e Mon Sep 17 00:00:00 2001 From: Andrii Nakryiko Date: Thu, 9 Nov 2023 16:26:38 -0800 Subject: selftests/bpf: add edge case backtracking logic test Add a dedicated selftests to try to set up conditions to have a state with same first and last instruction index, but it actually is a loop 3->4->1->2->3. This confuses mark_chain_precision() if verifier doesn't take into account jump history. Signed-off-by: Andrii Nakryiko Link: https://lore.kernel.org/r/20231110002638.4168352-4-andrii@kernel.org Signed-off-by: Alexei Starovoitov --- .../selftests/bpf/progs/verifier_precision.c | 40 ++++++++++++++++++++++ 1 file changed, 40 insertions(+) diff --git a/tools/testing/selftests/bpf/progs/verifier_precision.c b/tools/testing/selftests/bpf/progs/verifier_precision.c index 193c0f8272d0..6b564d4c0986 100644 --- a/tools/testing/selftests/bpf/progs/verifier_precision.c +++ b/tools/testing/selftests/bpf/progs/verifier_precision.c @@ -91,3 +91,43 @@ __naked int bpf_end_bswap(void) } #endif /* v4 instruction */ + +SEC("?raw_tp") +__success __log_level(2) +/* + * Without the bug fix there will be no history between "last_idx 3 first_idx 3" + * and "parent state regs=" lines. "R0_w=6" parts are here to help anchor + * expected log messages to the one specific mark_chain_precision operation. + * + * This is quite fragile: if verifier checkpointing heuristic changes, this + * might need adjusting. + */ +__msg("2: (07) r0 += 1 ; R0_w=6") +__msg("3: (35) if r0 >= 0xa goto pc+1") +__msg("mark_precise: frame0: last_idx 3 first_idx 3 subseq_idx -1") +__msg("mark_precise: frame0: regs=r0 stack= before 2: (07) r0 += 1") +__msg("mark_precise: frame0: regs=r0 stack= before 1: (07) r0 += 1") +__msg("mark_precise: frame0: regs=r0 stack= before 4: (05) goto pc-4") +__msg("mark_precise: frame0: regs=r0 stack= before 3: (35) if r0 >= 0xa goto pc+1") +__msg("mark_precise: frame0: parent state regs= stack=: R0_rw=P4") +__msg("3: R0_w=6") +__naked int state_loop_first_last_equal(void) +{ + asm volatile ( + "r0 = 0;" + "l0_%=:" + "r0 += 1;" + "r0 += 1;" + /* every few iterations we'll have a checkpoint here with + * first_idx == last_idx, potentially confusing precision + * backtracking logic + */ + "if r0 >= 10 goto l1_%=;" /* checkpoint + mark_precise */ + "goto l0_%=;" + "l1_%=:" + "exit;" + ::: __clobber_common + ); +} + +char _license[] SEC("license") = "GPL"; -- cgit v1.2.3 From 10e14e9652bf9e8104151bfd9200433083deae3d Mon Sep 17 00:00:00 2001 From: Andrii Nakryiko Date: Thu, 9 Nov 2023 22:14:10 -0800 Subject: bpf: fix control-flow graph checking in privileged mode When BPF program is verified in privileged mode, BPF verifier allows bounded loops. This means that from CFG point of view there are definitely some back-edges. Original commit adjusted check_cfg() logic to not detect back-edges in control flow graph if they are resulting from conditional jumps, which the idea that subsequent full BPF verification process will determine whether such loops are bounded or not, and either accept or reject the BPF program. At least that's my reading of the intent. Unfortunately, the implementation of this idea doesn't work correctly in all possible situations. Conditional jump might not result in immediate back-edge, but just a few unconditional instructions later we can arrive at back-edge. In such situations check_cfg() would reject BPF program even in privileged mode, despite it might be bounded loop. Next patch adds one simple program demonstrating such scenario. To keep things simple, instead of trying to detect back edges in privileged mode, just assume every back edge is valid and let subsequent BPF verification prove or reject bounded loops. Note a few test changes. For unknown reason, we have a few tests that are specified to detect a back-edge in a privileged mode, but looking at their code it seems like the right outcome is passing check_cfg() and letting subsequent verification to make a decision about bounded or not bounded looping. Bounded recursion case is also interesting. The example should pass, as recursion is limited to just a few levels and so we never reach maximum number of nested frames and never exhaust maximum stack depth. But the way that max stack depth logic works today it falsely detects this as exceeding max nested frame count. This patch series doesn't attempt to fix this orthogonal problem, so we just adjust expected verifier failure. Suggested-by: Alexei Starovoitov Fixes: 2589726d12a1 ("bpf: introduce bounded loops") Reported-by: Hao Sun Signed-off-by: Andrii Nakryiko Link: https://lore.kernel.org/r/20231110061412.2995786-1-andrii@kernel.org Signed-off-by: Alexei Starovoitov --- kernel/bpf/verifier.c | 23 ++++++++-------------- .../testing/selftests/bpf/progs/verifier_loops1.c | 9 ++++++--- tools/testing/selftests/bpf/verifier/calls.c | 6 +++--- 3 files changed, 17 insertions(+), 21 deletions(-) diff --git a/kernel/bpf/verifier.c b/kernel/bpf/verifier.c index 484c742f733e..a2267d5ed14e 100644 --- a/kernel/bpf/verifier.c +++ b/kernel/bpf/verifier.c @@ -15403,8 +15403,7 @@ enum { * w - next instruction * e - edge */ -static int push_insn(int t, int w, int e, struct bpf_verifier_env *env, - bool loop_ok) +static int push_insn(int t, int w, int e, struct bpf_verifier_env *env) { int *insn_stack = env->cfg.insn_stack; int *insn_state = env->cfg.insn_state; @@ -15436,7 +15435,7 @@ static int push_insn(int t, int w, int e, struct bpf_verifier_env *env, insn_stack[env->cfg.cur_stack++] = w; return KEEP_EXPLORING; } else if ((insn_state[w] & 0xF0) == DISCOVERED) { - if (loop_ok && env->bpf_capable) + if (env->bpf_capable) return DONE_EXPLORING; verbose_linfo(env, t, "%d: ", t); verbose_linfo(env, w, "%d: ", w); @@ -15459,7 +15458,7 @@ static int visit_func_call_insn(int t, struct bpf_insn *insns, int ret, insn_sz; insn_sz = bpf_is_ldimm64(&insns[t]) ? 2 : 1; - ret = push_insn(t, t + insn_sz, FALLTHROUGH, env, false); + ret = push_insn(t, t + insn_sz, FALLTHROUGH, env); if (ret) return ret; @@ -15469,12 +15468,7 @@ static int visit_func_call_insn(int t, struct bpf_insn *insns, if (visit_callee) { mark_prune_point(env, t); - ret = push_insn(t, t + insns[t].imm + 1, BRANCH, env, - /* It's ok to allow recursion from CFG point of - * view. __check_func_call() will do the actual - * check. - */ - bpf_pseudo_func(insns + t)); + ret = push_insn(t, t + insns[t].imm + 1, BRANCH, env); } return ret; } @@ -15496,7 +15490,7 @@ static int visit_insn(int t, struct bpf_verifier_env *env) if (BPF_CLASS(insn->code) != BPF_JMP && BPF_CLASS(insn->code) != BPF_JMP32) { insn_sz = bpf_is_ldimm64(insn) ? 2 : 1; - return push_insn(t, t + insn_sz, FALLTHROUGH, env, false); + return push_insn(t, t + insn_sz, FALLTHROUGH, env); } switch (BPF_OP(insn->code)) { @@ -15543,8 +15537,7 @@ static int visit_insn(int t, struct bpf_verifier_env *env) off = insn->imm; /* unconditional jump with single edge */ - ret = push_insn(t, t + off + 1, FALLTHROUGH, env, - true); + ret = push_insn(t, t + off + 1, FALLTHROUGH, env); if (ret) return ret; @@ -15557,11 +15550,11 @@ static int visit_insn(int t, struct bpf_verifier_env *env) /* conditional jump with two edges */ mark_prune_point(env, t); - ret = push_insn(t, t + 1, FALLTHROUGH, env, true); + ret = push_insn(t, t + 1, FALLTHROUGH, env); if (ret) return ret; - return push_insn(t, t + insn->off + 1, BRANCH, env, true); + return push_insn(t, t + insn->off + 1, BRANCH, env); } } diff --git a/tools/testing/selftests/bpf/progs/verifier_loops1.c b/tools/testing/selftests/bpf/progs/verifier_loops1.c index 5bc86af80a9a..71735dbf33d4 100644 --- a/tools/testing/selftests/bpf/progs/verifier_loops1.c +++ b/tools/testing/selftests/bpf/progs/verifier_loops1.c @@ -75,9 +75,10 @@ l0_%=: r0 += 1; \ " ::: __clobber_all); } -SEC("tracepoint") +SEC("socket") __description("bounded loop, start in the middle") -__failure __msg("back-edge") +__success +__failure_unpriv __msg_unpriv("back-edge") __naked void loop_start_in_the_middle(void) { asm volatile (" \ @@ -136,7 +137,9 @@ l0_%=: exit; \ SEC("tracepoint") __description("bounded recursion") -__failure __msg("back-edge") +__failure +/* verifier limitation in detecting max stack depth */ +__msg("the call stack of 8 frames is too deep !") __naked void bounded_recursion(void) { asm volatile (" \ diff --git a/tools/testing/selftests/bpf/verifier/calls.c b/tools/testing/selftests/bpf/verifier/calls.c index 1bdf2b43e49e..3d5cd51071f0 100644 --- a/tools/testing/selftests/bpf/verifier/calls.c +++ b/tools/testing/selftests/bpf/verifier/calls.c @@ -442,7 +442,7 @@ BPF_EXIT_INSN(), }, .prog_type = BPF_PROG_TYPE_TRACEPOINT, - .errstr = "back-edge from insn 0 to 0", + .errstr = "the call stack of 9 frames is too deep", .result = REJECT, }, { @@ -799,7 +799,7 @@ BPF_EXIT_INSN(), }, .prog_type = BPF_PROG_TYPE_TRACEPOINT, - .errstr = "back-edge", + .errstr = "the call stack of 9 frames is too deep", .result = REJECT, }, { @@ -811,7 +811,7 @@ BPF_EXIT_INSN(), }, .prog_type = BPF_PROG_TYPE_TRACEPOINT, - .errstr = "back-edge", + .errstr = "the call stack of 9 frames is too deep", .result = REJECT, }, { -- cgit v1.2.3 From e2e57d637aa5da0a2f49d83ad44e9febf95df7b4 Mon Sep 17 00:00:00 2001 From: Andrii Nakryiko Date: Thu, 9 Nov 2023 22:14:11 -0800 Subject: selftests/bpf: add more test cases for check_cfg() Add a few more simple cases to validate proper privileged vs unprivileged loop detection behavior. conditional_loop2 is the one reported by Hao Sun that triggered this set of fixes. Acked-by: Eduard Zingerman Suggested-by: Hao Sun Signed-off-by: Andrii Nakryiko Link: https://lore.kernel.org/r/20231110061412.2995786-2-andrii@kernel.org Signed-off-by: Alexei Starovoitov --- tools/testing/selftests/bpf/progs/verifier_cfg.c | 62 ++++++++++++++++++++++++ 1 file changed, 62 insertions(+) diff --git a/tools/testing/selftests/bpf/progs/verifier_cfg.c b/tools/testing/selftests/bpf/progs/verifier_cfg.c index df7697b94007..c1f55e1d80a4 100644 --- a/tools/testing/selftests/bpf/progs/verifier_cfg.c +++ b/tools/testing/selftests/bpf/progs/verifier_cfg.c @@ -97,4 +97,66 @@ l0_%=: r2 = r0; \ " ::: __clobber_all); } +SEC("socket") +__description("conditional loop (2)") +__success +__failure_unpriv __msg_unpriv("back-edge from insn 10 to 11") +__naked void conditional_loop2(void) +{ + asm volatile (" \ + r9 = 2 ll; \ + r3 = 0x20 ll; \ + r4 = 0x35 ll; \ + r8 = r4; \ + goto l1_%=; \ +l0_%=: r9 -= r3; \ + r9 -= r4; \ + r9 -= r8; \ +l1_%=: r8 += r4; \ + if r8 < 0x64 goto l0_%=; \ + r0 = r9; \ + exit; \ +" ::: __clobber_all); +} + +SEC("socket") +__description("unconditional loop after conditional jump") +__failure __msg("infinite loop detected") +__failure_unpriv __msg_unpriv("back-edge from insn 3 to 2") +__naked void uncond_loop_after_cond_jmp(void) +{ + asm volatile (" \ + r0 = 0; \ + if r0 > 0 goto l1_%=; \ +l0_%=: r0 = 1; \ + goto l0_%=; \ +l1_%=: exit; \ +" ::: __clobber_all); +} + + +__naked __noinline __used +static unsigned long never_ending_subprog() +{ + asm volatile (" \ + r0 = r1; \ + goto -1; \ +" ::: __clobber_all); +} + +SEC("socket") +__description("unconditional loop after conditional jump") +/* infinite loop is detected *after* check_cfg() */ +__failure __msg("infinite loop detected") +__naked void uncond_loop_in_subprog_after_cond_jmp(void) +{ + asm volatile (" \ + r0 = 0; \ + if r0 > 0 goto l1_%=; \ +l0_%=: r0 += 1; \ + call never_ending_subprog; \ +l1_%=: exit; \ +" ::: __clobber_all); +} + char _license[] SEC("license") = "GPL"; -- cgit v1.2.3 From 8a4f030dbced6fc255cbe67b2d0a129947e18493 Mon Sep 17 00:00:00 2001 From: Yuran Pereira Date: Wed, 8 Nov 2023 02:18:36 +0530 Subject: ptp: Fixes a null pointer dereference in ptp_ioctl Syzkaller found a null pointer dereference in ptp_ioctl originating from the lack of a null check for tsevq. ``` general protection fault, probably for non-canonical address 0xdffffc000000020b: 0000 [#1] PREEMPT SMP KASAN KASAN: probably user-memory-access in range [0x0000000000001058-0x000000000000105f] CPU: 0 PID: 5053 Comm: syz-executor353 Not tainted 6.6.0-syzkaller-10396-g4652b8e4f3ff #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/09/2023 RIP: 0010:ptp_ioctl+0xcb7/0x1d10 drivers/ptp/ptp_chardev.c:476 ... Call Trace: posix_clock_ioctl+0xf8/0x160 kernel/time/posix-clock.c:86 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:871 [inline] __se_sys_ioctl fs/ioctl.c:857 [inline] __x64_sys_ioctl+0x18f/0x210 fs/ioctl.c:857 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x3f/0x110 arch/x86/entry/common.c:82 entry_SYSCALL_64_after_hwframe+0x63/0x6b ``` This patch fixes the issue by adding a check for tsevq and ensuring ptp_ioctl returns with an error if tsevq is null. Reported-by: syzbot+8a78ecea7ac1a2ea26e5@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=8a78ecea7ac1a2ea26e5 Fixes: c5a445b1e934 ("ptp: support event queue reader channel masks") Signed-off-by: Yuran Pereira Reviewed-by: Przemek Kitszel Signed-off-by: David S. Miller --- drivers/ptp/ptp_chardev.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/ptp/ptp_chardev.c b/drivers/ptp/ptp_chardev.c index 3f7a74788802..e95a6ed130ef 100644 --- a/drivers/ptp/ptp_chardev.c +++ b/drivers/ptp/ptp_chardev.c @@ -176,6 +176,8 @@ long ptp_ioctl(struct posix_clock_context *pccontext, unsigned int cmd, int enable, err = 0; tsevq = pccontext->private_clkdata; + if (!tsevq) + return -EINVAL; switch (cmd) { -- cgit v1.2.3 From 871019b22d1bcc9fab2d1feba1b9a564acbb6e99 Mon Sep 17 00:00:00 2001 From: Stanislav Fomichev Date: Wed, 8 Nov 2023 13:13:25 -0800 Subject: net: set SOCK_RCU_FREE before inserting socket into hashtable We've started to see the following kernel traces: WARNING: CPU: 83 PID: 0 at net/core/filter.c:6641 sk_lookup+0x1bd/0x1d0 Call Trace: __bpf_skc_lookup+0x10d/0x120 bpf_sk_lookup+0x48/0xd0 bpf_sk_lookup_tcp+0x19/0x20 bpf_prog_+0x37c/0x16a3 cls_bpf_classify+0x205/0x2e0 tcf_classify+0x92/0x160 __netif_receive_skb_core+0xe52/0xf10 __netif_receive_skb_list_core+0x96/0x2b0 napi_complete_done+0x7b5/0xb70 _poll+0x94/0xb0 net_rx_action+0x163/0x1d70 __do_softirq+0xdc/0x32e asm_call_irq_on_stack+0x12/0x20 do_softirq_own_stack+0x36/0x50 do_softirq+0x44/0x70 __inet_hash can race with lockless (rcu) readers on the other cpus: __inet_hash __sk_nulls_add_node_rcu <- (bpf triggers here) sock_set_flag(SOCK_RCU_FREE) Let's move the SOCK_RCU_FREE part up a bit, before we are inserting the socket into hashtables. Note, that the race is really harmless; the bpf callers are handling this situation (where listener socket doesn't have SOCK_RCU_FREE set) correctly, so the only annoyance is a WARN_ONCE. More details from Eric regarding SOCK_RCU_FREE timeline: Commit 3b24d854cb35 ("tcp/dccp: do not touch listener sk_refcnt under synflood") added SOCK_RCU_FREE. At that time, the precise location of sock_set_flag(sk, SOCK_RCU_FREE) did not matter, because the thread calling __inet_hash() owns a reference on sk. SOCK_RCU_FREE was only tested at dismantle time. Commit 6acc9b432e67 ("bpf: Add helper to retrieve socket in BPF") started checking SOCK_RCU_FREE _after_ the lookup to infer whether the refcount has been taken care of. Fixes: 6acc9b432e67 ("bpf: Add helper to retrieve socket in BPF") Reviewed-by: Eric Dumazet Signed-off-by: Stanislav Fomichev Reviewed-by: Kuniyuki Iwashima Signed-off-by: David S. Miller --- net/ipv4/inet_hashtables.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/ipv4/inet_hashtables.c b/net/ipv4/inet_hashtables.c index 598c1b114d2c..a532f749e477 100644 --- a/net/ipv4/inet_hashtables.c +++ b/net/ipv4/inet_hashtables.c @@ -751,12 +751,12 @@ int __inet_hash(struct sock *sk, struct sock *osk) if (err) goto unlock; } + sock_set_flag(sk, SOCK_RCU_FREE); if (IS_ENABLED(CONFIG_IPV6) && sk->sk_reuseport && sk->sk_family == AF_INET6) __sk_nulls_add_node_tail_rcu(sk, &ilb2->nulls_head); else __sk_nulls_add_node_rcu(sk, &ilb2->nulls_head); - sock_set_flag(sk, SOCK_RCU_FREE); sock_prot_inuse_add(sock_net(sk), sk->sk_prot, 1); unlock: spin_unlock(&ilb2->lock); -- cgit v1.2.3 From cbe9e68e1e0f965fd3b1caf975eb29083c65e6b0 Mon Sep 17 00:00:00 2001 From: Ravi Gunasekaran Date: Fri, 10 Nov 2023 14:57:49 +0530 Subject: MAINTAINERS: net: Update reviewers for TI's Ethernet drivers Grygorii is no longer associated with TI and messages addressed to him bounce. Add Siddharth, Roger and myself as reviewers. Signed-off-by: Ravi Gunasekaran Signed-off-by: David S. Miller --- MAINTAINERS | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index 350d00657f6b..e3acb36989f0 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -21769,7 +21769,9 @@ F: Documentation/devicetree/bindings/counter/ti-eqep.yaml F: drivers/counter/ti-eqep.c TI ETHERNET SWITCH DRIVER (CPSW) -R: Grygorii Strashko +R: Siddharth Vadapalli +R: Ravi Gunasekaran +R: Roger Quadros L: linux-omap@vger.kernel.org L: netdev@vger.kernel.org S: Maintained -- cgit v1.2.3 From 18f039428c7df183b09c69ebf10ffd4e521035d2 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Thu, 9 Nov 2023 15:22:41 +0000 Subject: ipvlan: add ipvlan_route_v6_outbound() helper Inspired by syzbot reports using a stack of multiple ipvlan devices. Reduce stack size needed in ipvlan_process_v6_outbound() by moving the flowi6 struct used for the route lookup in an non inlined helper. ipvlan_route_v6_outbound() needs 120 bytes on the stack, immediately reclaimed. Also make sure ipvlan_process_v4_outbound() is not inlined. We might also have to lower MAX_NEST_DEV, because only syzbot uses setups with more than four stacked devices. BUG: TASK stack guard page was hit at ffffc9000e803ff8 (stack is ffffc9000e804000..ffffc9000e808000) stack guard page: 0000 [#1] SMP KASAN CPU: 0 PID: 13442 Comm: syz-executor.4 Not tainted 6.1.52-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/09/2023 RIP: 0010:kasan_check_range+0x4/0x2a0 mm/kasan/generic.c:188 Code: 48 01 c6 48 89 c7 e8 db 4e c1 03 31 c0 5d c3 cc 0f 0b eb 02 0f 0b b8 ea ff ff ff 5d c3 cc 00 00 cc cc 00 00 cc cc 55 48 89 e5 <41> 57 41 56 41 55 41 54 53 b0 01 48 85 f6 0f 84 a4 01 00 00 48 89 RSP: 0018:ffffc9000e804000 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffffff817e5bf2 RDX: 0000000000000000 RSI: 0000000000000008 RDI: ffffffff887c6568 RBP: ffffc9000e804000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: dffffc0000000001 R12: 1ffff92001d0080c R13: dffffc0000000000 R14: ffffffff87e6b100 R15: 0000000000000000 FS: 00007fd0c55826c0(0000) GS:ffff8881f6800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffc9000e803ff8 CR3: 0000000170ef7000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <#DF> [] __kasan_check_read+0x11/0x20 mm/kasan/shadow.c:31 [] instrument_atomic_read include/linux/instrumented.h:72 [inline] [] _test_bit include/asm-generic/bitops/instrumented-non-atomic.h:141 [inline] [] cpumask_test_cpu include/linux/cpumask.h:506 [inline] [] cpu_online include/linux/cpumask.h:1092 [inline] [] trace_lock_acquire include/trace/events/lock.h:24 [inline] [] lock_acquire+0xe2/0x590 kernel/locking/lockdep.c:5632 [] rcu_lock_acquire+0x2e/0x40 include/linux/rcupdate.h:306 [] rcu_read_lock include/linux/rcupdate.h:747 [inline] [] ip6_pol_route+0x15d/0x1440 net/ipv6/route.c:2221 [] ip6_pol_route_output+0x50/0x80 net/ipv6/route.c:2606 [] pol_lookup_func include/net/ip6_fib.h:584 [inline] [] fib6_rule_lookup+0x265/0x620 net/ipv6/fib6_rules.c:116 [] ip6_route_output_flags_noref+0x2d9/0x3a0 net/ipv6/route.c:2638 [] ip6_route_output_flags+0xca/0x340 net/ipv6/route.c:2651 [] ip6_route_output include/net/ip6_route.h:100 [inline] [] ipvlan_process_v6_outbound drivers/net/ipvlan/ipvlan_core.c:473 [inline] [] ipvlan_process_outbound drivers/net/ipvlan/ipvlan_core.c:529 [inline] [] ipvlan_xmit_mode_l3 drivers/net/ipvlan/ipvlan_core.c:602 [inline] [] ipvlan_queue_xmit+0xc33/0x1be0 drivers/net/ipvlan/ipvlan_core.c:677 [] ipvlan_start_xmit+0x49/0x100 drivers/net/ipvlan/ipvlan_main.c:229 [] netdev_start_xmit include/linux/netdevice.h:4966 [inline] [] xmit_one net/core/dev.c:3644 [inline] [] dev_hard_start_xmit+0x320/0x980 net/core/dev.c:3660 [] __dev_queue_xmit+0x16b2/0x3370 net/core/dev.c:4324 [] dev_queue_xmit include/linux/netdevice.h:3067 [inline] [] neigh_hh_output include/net/neighbour.h:529 [inline] [] neigh_output include/net/neighbour.h:543 [inline] [] ip6_finish_output2+0x160d/0x1ae0 net/ipv6/ip6_output.c:139 [] __ip6_finish_output net/ipv6/ip6_output.c:200 [inline] [] ip6_finish_output+0x6c6/0xb10 net/ipv6/ip6_output.c:211 [] NF_HOOK_COND include/linux/netfilter.h:298 [inline] [] ip6_output+0x2bc/0x3d0 net/ipv6/ip6_output.c:232 [] dst_output include/net/dst.h:444 [inline] [] ip6_local_out+0x10f/0x140 net/ipv6/output_core.c:161 [] ipvlan_process_v6_outbound drivers/net/ipvlan/ipvlan_core.c:483 [inline] [] ipvlan_process_outbound drivers/net/ipvlan/ipvlan_core.c:529 [inline] [] ipvlan_xmit_mode_l3 drivers/net/ipvlan/ipvlan_core.c:602 [inline] [] ipvlan_queue_xmit+0x1174/0x1be0 drivers/net/ipvlan/ipvlan_core.c:677 [] ipvlan_start_xmit+0x49/0x100 drivers/net/ipvlan/ipvlan_main.c:229 [] netdev_start_xmit include/linux/netdevice.h:4966 [inline] [] xmit_one net/core/dev.c:3644 [inline] [] dev_hard_start_xmit+0x320/0x980 net/core/dev.c:3660 [] __dev_queue_xmit+0x16b2/0x3370 net/core/dev.c:4324 [] dev_queue_xmit include/linux/netdevice.h:3067 [inline] [] neigh_hh_output include/net/neighbour.h:529 [inline] [] neigh_output include/net/neighbour.h:543 [inline] [] ip6_finish_output2+0x160d/0x1ae0 net/ipv6/ip6_output.c:139 [] __ip6_finish_output net/ipv6/ip6_output.c:200 [inline] [] ip6_finish_output+0x6c6/0xb10 net/ipv6/ip6_output.c:211 [] NF_HOOK_COND include/linux/netfilter.h:298 [inline] [] ip6_output+0x2bc/0x3d0 net/ipv6/ip6_output.c:232 [] dst_output include/net/dst.h:444 [inline] [] ip6_local_out+0x10f/0x140 net/ipv6/output_core.c:161 [] ipvlan_process_v6_outbound drivers/net/ipvlan/ipvlan_core.c:483 [inline] [] ipvlan_process_outbound drivers/net/ipvlan/ipvlan_core.c:529 [inline] [] ipvlan_xmit_mode_l3 drivers/net/ipvlan/ipvlan_core.c:602 [inline] [] ipvlan_queue_xmit+0x1174/0x1be0 drivers/net/ipvlan/ipvlan_core.c:677 [] ipvlan_start_xmit+0x49/0x100 drivers/net/ipvlan/ipvlan_main.c:229 [] netdev_start_xmit include/linux/netdevice.h:4966 [inline] [] xmit_one net/core/dev.c:3644 [inline] [] dev_hard_start_xmit+0x320/0x980 net/core/dev.c:3660 [] __dev_queue_xmit+0x16b2/0x3370 net/core/dev.c:4324 [] dev_queue_xmit include/linux/netdevice.h:3067 [inline] [] neigh_hh_output include/net/neighbour.h:529 [inline] [] neigh_output include/net/neighbour.h:543 [inline] [] ip6_finish_output2+0x160d/0x1ae0 net/ipv6/ip6_output.c:139 [] __ip6_finish_output net/ipv6/ip6_output.c:200 [inline] [] ip6_finish_output+0x6c6/0xb10 net/ipv6/ip6_output.c:211 [] NF_HOOK_COND include/linux/netfilter.h:298 [inline] [] ip6_output+0x2bc/0x3d0 net/ipv6/ip6_output.c:232 [] dst_output include/net/dst.h:444 [inline] [] ip6_local_out+0x10f/0x140 net/ipv6/output_core.c:161 [] ipvlan_process_v6_outbound drivers/net/ipvlan/ipvlan_core.c:483 [inline] [] ipvlan_process_outbound drivers/net/ipvlan/ipvlan_core.c:529 [inline] [] ipvlan_xmit_mode_l3 drivers/net/ipvlan/ipvlan_core.c:602 [inline] [] ipvlan_queue_xmit+0x1174/0x1be0 drivers/net/ipvlan/ipvlan_core.c:677 [] ipvlan_start_xmit+0x49/0x100 drivers/net/ipvlan/ipvlan_main.c:229 [] netdev_start_xmit include/linux/netdevice.h:4966 [inline] [] xmit_one net/core/dev.c:3644 [inline] [] dev_hard_start_xmit+0x320/0x980 net/core/dev.c:3660 [] __dev_queue_xmit+0x16b2/0x3370 net/core/dev.c:4324 [] dev_queue_xmit include/linux/netdevice.h:3067 [inline] [] neigh_hh_output include/net/neighbour.h:529 [inline] [] neigh_output include/net/neighbour.h:543 [inline] [] ip6_finish_output2+0x160d/0x1ae0 net/ipv6/ip6_output.c:139 [] __ip6_finish_output net/ipv6/ip6_output.c:200 [inline] [] ip6_finish_output+0x6c6/0xb10 net/ipv6/ip6_output.c:211 [] NF_HOOK_COND include/linux/netfilter.h:298 [inline] [] ip6_output+0x2bc/0x3d0 net/ipv6/ip6_output.c:232 [] dst_output include/net/dst.h:444 [inline] [] ip6_local_out+0x10f/0x140 net/ipv6/output_core.c:161 [] ipvlan_process_v6_outbound drivers/net/ipvlan/ipvlan_core.c:483 [inline] [] ipvlan_process_outbound drivers/net/ipvlan/ipvlan_core.c:529 [inline] [] ipvlan_xmit_mode_l3 drivers/net/ipvlan/ipvlan_core.c:602 [inline] [] ipvlan_queue_xmit+0x1174/0x1be0 drivers/net/ipvlan/ipvlan_core.c:677 [] ipvlan_start_xmit+0x49/0x100 drivers/net/ipvlan/ipvlan_main.c:229 [] netdev_start_xmit include/linux/netdevice.h:4966 [inline] [] xmit_one net/core/dev.c:3644 [inline] [] dev_hard_start_xmit+0x320/0x980 net/core/dev.c:3660 [] __dev_queue_xmit+0x16b2/0x3370 net/core/dev.c:4324 [] dev_queue_xmit include/linux/netdevice.h:3067 [inline] [] neigh_resolve_output+0x64e/0x750 net/core/neighbour.c:1560 [] neigh_output include/net/neighbour.h:545 [inline] [] ip6_finish_output2+0x1643/0x1ae0 net/ipv6/ip6_output.c:139 [] __ip6_finish_output net/ipv6/ip6_output.c:200 [inline] [] ip6_finish_output+0x6c6/0xb10 net/ipv6/ip6_output.c:211 [] NF_HOOK_COND include/linux/netfilter.h:298 [inline] [] ip6_output+0x2bc/0x3d0 net/ipv6/ip6_output.c:232 [] dst_output include/net/dst.h:444 [inline] [] NF_HOOK include/linux/netfilter.h:309 [inline] [] ip6_xmit+0x11a4/0x1b20 net/ipv6/ip6_output.c:352 [] sctp_v6_xmit+0x9ae/0x1230 net/sctp/ipv6.c:250 [] sctp_packet_transmit+0x25de/0x2bc0 net/sctp/output.c:653 [] sctp_packet_singleton+0x202/0x310 net/sctp/outqueue.c:783 [] sctp_outq_flush_ctrl net/sctp/outqueue.c:914 [inline] [] sctp_outq_flush+0x661/0x3d40 net/sctp/outqueue.c:1212 [] sctp_outq_uncork+0x79/0xb0 net/sctp/outqueue.c:764 [] sctp_side_effects net/sctp/sm_sideeffect.c:1199 [inline] [] sctp_do_sm+0x55c0/0x5c30 net/sctp/sm_sideeffect.c:1170 [] sctp_primitive_ASSOCIATE+0x97/0xc0 net/sctp/primitive.c:73 [] sctp_sendmsg_to_asoc+0xf62/0x17b0 net/sctp/socket.c:1839 [] sctp_sendmsg+0x212e/0x33b0 net/sctp/socket.c:2029 [] inet_sendmsg+0x149/0x310 net/ipv4/af_inet.c:849 [] sock_sendmsg_nosec net/socket.c:716 [inline] [] sock_sendmsg net/socket.c:736 [inline] [] ____sys_sendmsg+0x572/0x8c0 net/socket.c:2504 [] ___sys_sendmsg net/socket.c:2558 [inline] [] __sys_sendmsg+0x271/0x360 net/socket.c:2587 [] __do_sys_sendmsg net/socket.c:2596 [inline] [] __se_sys_sendmsg net/socket.c:2594 [inline] [] __x64_sys_sendmsg+0x7f/0x90 net/socket.c:2594 [] do_syscall_x64 arch/x86/entry/common.c:51 [inline] [] do_syscall_64+0x53/0x80 arch/x86/entry/common.c:84 [] entry_SYSCALL_64_after_hwframe+0x63/0xcd Fixes: 2ad7bf363841 ("ipvlan: Initial check-in of the IPVLAN driver.") Reported-by: syzbot Signed-off-by: Eric Dumazet Cc: Mahesh Bandewar Cc: Willem de Bruijn Reviewed-by: Willem de Bruijn Signed-off-by: David S. Miller --- drivers/net/ipvlan/ipvlan_core.c | 41 ++++++++++++++++++++++++---------------- 1 file changed, 25 insertions(+), 16 deletions(-) diff --git a/drivers/net/ipvlan/ipvlan_core.c b/drivers/net/ipvlan/ipvlan_core.c index 21e9cac73121..2d5b021b4ea6 100644 --- a/drivers/net/ipvlan/ipvlan_core.c +++ b/drivers/net/ipvlan/ipvlan_core.c @@ -411,7 +411,7 @@ struct ipvl_addr *ipvlan_addr_lookup(struct ipvl_port *port, void *lyr3h, return addr; } -static int ipvlan_process_v4_outbound(struct sk_buff *skb) +static noinline_for_stack int ipvlan_process_v4_outbound(struct sk_buff *skb) { const struct iphdr *ip4h = ip_hdr(skb); struct net_device *dev = skb->dev; @@ -453,13 +453,11 @@ out: } #if IS_ENABLED(CONFIG_IPV6) -static int ipvlan_process_v6_outbound(struct sk_buff *skb) + +static noinline_for_stack int +ipvlan_route_v6_outbound(struct net_device *dev, struct sk_buff *skb) { const struct ipv6hdr *ip6h = ipv6_hdr(skb); - struct net_device *dev = skb->dev; - struct net *net = dev_net(dev); - struct dst_entry *dst; - int err, ret = NET_XMIT_DROP; struct flowi6 fl6 = { .flowi6_oif = dev->ifindex, .daddr = ip6h->daddr, @@ -469,27 +467,38 @@ static int ipvlan_process_v6_outbound(struct sk_buff *skb) .flowi6_mark = skb->mark, .flowi6_proto = ip6h->nexthdr, }; + struct dst_entry *dst; + int err; - dst = ip6_route_output(net, NULL, &fl6); - if (dst->error) { - ret = dst->error; + dst = ip6_route_output(dev_net(dev), NULL, &fl6); + err = dst->error; + if (err) { dst_release(dst); - goto err; + return err; } skb_dst_set(skb, dst); + return 0; +} + +static int ipvlan_process_v6_outbound(struct sk_buff *skb) +{ + struct net_device *dev = skb->dev; + int err, ret = NET_XMIT_DROP; + + err = ipvlan_route_v6_outbound(dev, skb); + if (unlikely(err)) { + DEV_STATS_INC(dev, tx_errors); + kfree_skb(skb); + return err; + } memset(IP6CB(skb), 0, sizeof(*IP6CB(skb))); - err = ip6_local_out(net, skb->sk, skb); + err = ip6_local_out(dev_net(dev), skb->sk, skb); if (unlikely(net_xmit_eval(err))) DEV_STATS_INC(dev, tx_errors); else ret = NET_XMIT_SUCCESS; - goto out; -err: - DEV_STATS_INC(dev, tx_errors); - kfree_skb(skb); -out: return ret; } #else -- cgit v1.2.3 From 719639853d88071dfdfd8d9971eca9c283ff314c Mon Sep 17 00:00:00 2001 From: Shigeru Yoshida Date: Thu, 9 Nov 2023 00:44:20 +0900 Subject: tty: Fix uninit-value access in ppp_sync_receive() KMSAN reported the following uninit-value access issue: ===================================================== BUG: KMSAN: uninit-value in ppp_sync_input drivers/net/ppp/ppp_synctty.c:690 [inline] BUG: KMSAN: uninit-value in ppp_sync_receive+0xdc9/0xe70 drivers/net/ppp/ppp_synctty.c:334 ppp_sync_input drivers/net/ppp/ppp_synctty.c:690 [inline] ppp_sync_receive+0xdc9/0xe70 drivers/net/ppp/ppp_synctty.c:334 tiocsti+0x328/0x450 drivers/tty/tty_io.c:2295 tty_ioctl+0x808/0x1920 drivers/tty/tty_io.c:2694 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:871 [inline] __se_sys_ioctl+0x211/0x400 fs/ioctl.c:857 __x64_sys_ioctl+0x97/0xe0 fs/ioctl.c:857 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x44/0x110 arch/x86/entry/common.c:82 entry_SYSCALL_64_after_hwframe+0x63/0x6b Uninit was created at: __alloc_pages+0x75d/0xe80 mm/page_alloc.c:4591 __alloc_pages_node include/linux/gfp.h:238 [inline] alloc_pages_node include/linux/gfp.h:261 [inline] __page_frag_cache_refill+0x9a/0x2c0 mm/page_alloc.c:4691 page_frag_alloc_align+0x91/0x5d0 mm/page_alloc.c:4722 page_frag_alloc include/linux/gfp.h:322 [inline] __netdev_alloc_skb+0x215/0x6d0 net/core/skbuff.c:728 netdev_alloc_skb include/linux/skbuff.h:3225 [inline] dev_alloc_skb include/linux/skbuff.h:3238 [inline] ppp_sync_input drivers/net/ppp/ppp_synctty.c:669 [inline] ppp_sync_receive+0x237/0xe70 drivers/net/ppp/ppp_synctty.c:334 tiocsti+0x328/0x450 drivers/tty/tty_io.c:2295 tty_ioctl+0x808/0x1920 drivers/tty/tty_io.c:2694 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:871 [inline] __se_sys_ioctl+0x211/0x400 fs/ioctl.c:857 __x64_sys_ioctl+0x97/0xe0 fs/ioctl.c:857 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x44/0x110 arch/x86/entry/common.c:82 entry_SYSCALL_64_after_hwframe+0x63/0x6b CPU: 0 PID: 12950 Comm: syz-executor.1 Not tainted 6.6.0-14500-g1c41041124bd #10 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-1.fc38 04/01/2014 ===================================================== ppp_sync_input() checks the first 2 bytes of the data are PPP_ALLSTATIONS and PPP_UI. However, if the data length is 1 and the first byte is PPP_ALLSTATIONS, an access to an uninitialized value occurs when checking PPP_UI. This patch resolves this issue by checking the data length. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Shigeru Yoshida Reviewed-by: Simon Horman Signed-off-by: David S. Miller --- drivers/net/ppp/ppp_synctty.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ppp/ppp_synctty.c b/drivers/net/ppp/ppp_synctty.c index ebcdffdf4f0e..ea261a628786 100644 --- a/drivers/net/ppp/ppp_synctty.c +++ b/drivers/net/ppp/ppp_synctty.c @@ -687,7 +687,7 @@ ppp_sync_input(struct syncppp *ap, const u8 *buf, const u8 *flags, int count) /* strip address/control field if present */ p = skb->data; - if (p[0] == PPP_ALLSTATIONS && p[1] == PPP_UI) { + if (skb->len >= 2 && p[0] == PPP_ALLSTATIONS && p[1] == PPP_UI) { /* chop off address/control */ if (skb->len < 3) goto err; -- cgit v1.2.3 From 4b21a669ca21ed8f24ef4530b2918be5730114de Mon Sep 17 00:00:00 2001 From: Kailang Yang Date: Fri, 10 Nov 2023 15:16:06 +0800 Subject: ALSA: hda/realtek - Add Dell ALC295 to pin fall back table Add ALC295 to pin fall back table. Remove 5 pin quirks for Dell ALC295. ALC295 was only support MIC2 for external MIC function. ALC295 assigned model "ALC269_FIXUP_DELL1_MIC_NO_PRESENCE" for pin fall back table. It was assigned wrong model. So, let's remove it. Fixes: fbc571290d9f ("ALSA: hda/realtek - Fixed Headphone Mic can't record on Dell platform") Signed-off-by: Kailang Yang Cc: Link: https://lore.kernel.org/r/7c1998e873834df98d59bd7e0d08c72e@realtek.com Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 19 +++---------------- 1 file changed, 3 insertions(+), 16 deletions(-) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 669ae3d6e447..d689f0050aae 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -10821,22 +10821,6 @@ static const struct snd_hda_pin_quirk alc269_pin_fixup_tbl[] = { {0x12, 0x90a60130}, {0x17, 0x90170110}, {0x21, 0x03211020}), - SND_HDA_PIN_QUIRK(0x10ec0295, 0x1028, "Dell", ALC269_FIXUP_DELL4_MIC_NO_PRESENCE, - {0x14, 0x90170110}, - {0x21, 0x04211020}), - SND_HDA_PIN_QUIRK(0x10ec0295, 0x1028, "Dell", ALC269_FIXUP_DELL4_MIC_NO_PRESENCE, - {0x14, 0x90170110}, - {0x21, 0x04211030}), - SND_HDA_PIN_QUIRK(0x10ec0295, 0x1028, "Dell", ALC269_FIXUP_DELL1_MIC_NO_PRESENCE, - ALC295_STANDARD_PINS, - {0x17, 0x21014020}, - {0x18, 0x21a19030}), - SND_HDA_PIN_QUIRK(0x10ec0295, 0x1028, "Dell", ALC269_FIXUP_DELL1_MIC_NO_PRESENCE, - ALC295_STANDARD_PINS, - {0x17, 0x21014040}, - {0x18, 0x21a19050}), - SND_HDA_PIN_QUIRK(0x10ec0295, 0x1028, "Dell", ALC269_FIXUP_DELL1_MIC_NO_PRESENCE, - ALC295_STANDARD_PINS), SND_HDA_PIN_QUIRK(0x10ec0298, 0x1028, "Dell", ALC298_FIXUP_DELL1_MIC_NO_PRESENCE, ALC298_STANDARD_PINS, {0x17, 0x90170110}), @@ -10880,6 +10864,9 @@ static const struct snd_hda_pin_quirk alc269_fallback_pin_fixup_tbl[] = { SND_HDA_PIN_QUIRK(0x10ec0289, 0x1028, "Dell", ALC269_FIXUP_DELL4_MIC_NO_PRESENCE, {0x19, 0x40000000}, {0x1b, 0x40000000}), + SND_HDA_PIN_QUIRK(0x10ec0295, 0x1028, "Dell", ALC269_FIXUP_DELL4_MIC_NO_PRESENCE, + {0x19, 0x40000000}, + {0x1b, 0x40000000}), SND_HDA_PIN_QUIRK(0x10ec0256, 0x1028, "Dell", ALC255_FIXUP_DELL1_MIC_NO_PRESENCE, {0x19, 0x40000000}, {0x1a, 0x40000000}), -- cgit v1.2.3 From 8384c0baf223e1c3bc7b1c711d80a4c6106d210e Mon Sep 17 00:00:00 2001 From: Eymen Yigit Date: Fri, 10 Nov 2023 18:07:15 +0300 Subject: ALSA: hda/realtek: Enable Mute LED on HP 255 G8 This HP Notebook uses ALC236 codec with COEF 0x07 idx 1 controlling the mute LED. Enable already existing quirk for this device. Signed-off-by: Eymen Yigit Cc: Luka Guzenko Cc: Link: https://lore.kernel.org/r/20231110150715.5141-1-eymenyg01@gmail.com Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index d689f0050aae..c7de74396185 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -9832,6 +9832,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x103c, 0x8898, "HP EliteBook 845 G8 Notebook PC", ALC285_FIXUP_HP_LIMIT_INT_MIC_BOOST), SND_PCI_QUIRK(0x103c, 0x88d0, "HP Pavilion 15-eh1xxx (mainboard 88D0)", ALC287_FIXUP_HP_GPIO_LED), SND_PCI_QUIRK(0x103c, 0x8902, "HP OMEN 16", ALC285_FIXUP_HP_MUTE_LED), + SND_PCI_QUIRK(0x103c, 0x890e, "HP 255 G8 Notebook PC", ALC236_FIXUP_HP_MUTE_LED_COEFBIT2), SND_PCI_QUIRK(0x103c, 0x8919, "HP Pavilion Aero Laptop 13-be0xxx", ALC287_FIXUP_HP_GPIO_LED), SND_PCI_QUIRK(0x103c, 0x896d, "HP ZBook Firefly 16 G9", ALC245_FIXUP_CS35L41_SPI_2_HP_GPIO_LED), SND_PCI_QUIRK(0x103c, 0x896e, "HP EliteBook x360 830 G9", ALC245_FIXUP_CS35L41_SPI_2_HP_GPIO_LED), -- cgit v1.2.3 From c3803203bc5ec910a3eb06172cf6fb368e0e4390 Mon Sep 17 00:00:00 2001 From: Ani Sinha Date: Mon, 16 Oct 2023 19:01:22 +0530 Subject: hv/hv_kvp_daemon: Some small fixes for handling NM keyfiles Some small fixes: - lets make sure we are not adding ipv4 addresses in ipv6 section in keyfile and vice versa. - ADDR_FAMILY_IPV6 is a bit in addr_family. Test that bit instead of checking the whole value of addr_family. - Some trivial fixes in hv_set_ifconfig.sh. These fixes are proposed after doing some internal testing at Red Hat. CC: Shradha Gupta CC: Saurabh Sengar Fixes: 42999c904612 ("hv/hv_kvp_daemon:Support for keyfile based connection profile") Signed-off-by: Ani Sinha Reviewed-by: Shradha Gupta Signed-off-by: Wei Liu Message-ID: <20231016133122.2419537-1-anisinha@redhat.com> --- tools/hv/hv_kvp_daemon.c | 20 ++++++++++++-------- tools/hv/hv_set_ifconfig.sh | 4 ++-- 2 files changed, 14 insertions(+), 10 deletions(-) diff --git a/tools/hv/hv_kvp_daemon.c b/tools/hv/hv_kvp_daemon.c index 264eeb9c46a9..318e2dad27e0 100644 --- a/tools/hv/hv_kvp_daemon.c +++ b/tools/hv/hv_kvp_daemon.c @@ -1421,7 +1421,7 @@ static int kvp_set_ip_info(char *if_name, struct hv_kvp_ipaddr_value *new_val) if (error) goto setval_error; - if (new_val->addr_family == ADDR_FAMILY_IPV6) { + if (new_val->addr_family & ADDR_FAMILY_IPV6) { error = fprintf(nmfile, "\n[ipv6]\n"); if (error < 0) goto setval_error; @@ -1455,14 +1455,18 @@ static int kvp_set_ip_info(char *if_name, struct hv_kvp_ipaddr_value *new_val) if (error < 0) goto setval_error; - error = fprintf(nmfile, "gateway=%s\n", (char *)new_val->gate_way); - if (error < 0) - goto setval_error; - - error = fprintf(nmfile, "dns=%s\n", (char *)new_val->dns_addr); - if (error < 0) - goto setval_error; + /* we do not want ipv4 addresses in ipv6 section and vice versa */ + if (is_ipv6 != is_ipv4((char *)new_val->gate_way)) { + error = fprintf(nmfile, "gateway=%s\n", (char *)new_val->gate_way); + if (error < 0) + goto setval_error; + } + if (is_ipv6 != is_ipv4((char *)new_val->dns_addr)) { + error = fprintf(nmfile, "dns=%s\n", (char *)new_val->dns_addr); + if (error < 0) + goto setval_error; + } fclose(nmfile); fclose(ifcfg_file); diff --git a/tools/hv/hv_set_ifconfig.sh b/tools/hv/hv_set_ifconfig.sh index ae5a7a8249a2..440a91b35823 100755 --- a/tools/hv/hv_set_ifconfig.sh +++ b/tools/hv/hv_set_ifconfig.sh @@ -53,7 +53,7 @@ # or "manual" if no boot-time protocol should be used) # # address1=ipaddr1/plen -# address=ipaddr2/plen +# address2=ipaddr2/plen # # gateway=gateway1;gateway2 # @@ -61,7 +61,7 @@ # # [ipv6] # address1=ipaddr1/plen -# address2=ipaddr1/plen +# address2=ipaddr2/plen # # gateway=gateway1;gateway2 # -- cgit v1.2.3 From 5c0930ccaad5a74d74e8b18b648c5eb21ed2fe94 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Tue, 7 Nov 2023 15:57:13 +0100 Subject: hrtimers: Push pending hrtimers away from outgoing CPU earlier 2b8272ff4a70 ("cpu/hotplug: Prevent self deadlock on CPU hot-unplug") solved the straight forward CPU hotplug deadlock vs. the scheduler bandwidth timer. Yu discovered a more involved variant where a task which has a bandwidth timer started on the outgoing CPU holds a lock and then gets throttled. If the lock required by one of the CPU hotplug callbacks the hotplug operation deadlocks because the unthrottling timer event is not handled on the dying CPU and can only be recovered once the control CPU reaches the hotplug state which pulls the pending hrtimers from the dead CPU. Solve this by pushing the hrtimers away from the dying CPU in the dying callbacks. Nothing can queue a hrtimer on the dying CPU at that point because all other CPUs spin in stop_machine() with interrupts disabled and once the operation is finished the CPU is marked offline. Reported-by: Yu Liao Signed-off-by: Thomas Gleixner Tested-by: Liu Tie Link: https://lore.kernel.org/r/87a5rphara.ffs@tglx --- include/linux/cpuhotplug.h | 1 + include/linux/hrtimer.h | 4 ++-- kernel/cpu.c | 8 +++++++- kernel/time/hrtimer.c | 33 ++++++++++++--------------------- 4 files changed, 22 insertions(+), 24 deletions(-) diff --git a/include/linux/cpuhotplug.h b/include/linux/cpuhotplug.h index 068f7738be22..448f5f995adc 100644 --- a/include/linux/cpuhotplug.h +++ b/include/linux/cpuhotplug.h @@ -193,6 +193,7 @@ enum cpuhp_state { CPUHP_AP_ARM_CORESIGHT_CTI_STARTING, CPUHP_AP_ARM64_ISNDEP_STARTING, CPUHP_AP_SMPCFD_DYING, + CPUHP_AP_HRTIMERS_DYING, CPUHP_AP_X86_TBOOT_DYING, CPUHP_AP_ARM_CACHE_B15_RAC_DYING, CPUHP_AP_ONLINE, diff --git a/include/linux/hrtimer.h b/include/linux/hrtimer.h index 0ee140176f10..f2044d5a652b 100644 --- a/include/linux/hrtimer.h +++ b/include/linux/hrtimer.h @@ -531,9 +531,9 @@ extern void sysrq_timer_list_show(void); int hrtimers_prepare_cpu(unsigned int cpu); #ifdef CONFIG_HOTPLUG_CPU -int hrtimers_dead_cpu(unsigned int cpu); +int hrtimers_cpu_dying(unsigned int cpu); #else -#define hrtimers_dead_cpu NULL +#define hrtimers_cpu_dying NULL #endif #endif diff --git a/kernel/cpu.c b/kernel/cpu.c index 6de7c6bb74ee..2e69a1deaa31 100644 --- a/kernel/cpu.c +++ b/kernel/cpu.c @@ -2098,7 +2098,7 @@ static struct cpuhp_step cpuhp_hp_states[] = { [CPUHP_HRTIMERS_PREPARE] = { .name = "hrtimers:prepare", .startup.single = hrtimers_prepare_cpu, - .teardown.single = hrtimers_dead_cpu, + .teardown.single = NULL, }, [CPUHP_SMPCFD_PREPARE] = { .name = "smpcfd:prepare", @@ -2190,6 +2190,12 @@ static struct cpuhp_step cpuhp_hp_states[] = { .startup.single = NULL, .teardown.single = smpcfd_dying_cpu, }, + [CPUHP_AP_HRTIMERS_DYING] = { + .name = "hrtimers:dying", + .startup.single = NULL, + .teardown.single = hrtimers_cpu_dying, + }, + /* Entry state on starting. Interrupts enabled from here on. Transient * state for synchronsization */ [CPUHP_AP_ONLINE] = { diff --git a/kernel/time/hrtimer.c b/kernel/time/hrtimer.c index 238262e4aba7..760793998cdd 100644 --- a/kernel/time/hrtimer.c +++ b/kernel/time/hrtimer.c @@ -2219,29 +2219,22 @@ static void migrate_hrtimer_list(struct hrtimer_clock_base *old_base, } } -int hrtimers_dead_cpu(unsigned int scpu) +int hrtimers_cpu_dying(unsigned int dying_cpu) { struct hrtimer_cpu_base *old_base, *new_base; - int i; + int i, ncpu = cpumask_first(cpu_active_mask); - BUG_ON(cpu_online(scpu)); - tick_cancel_sched_timer(scpu); + tick_cancel_sched_timer(dying_cpu); + + old_base = this_cpu_ptr(&hrtimer_bases); + new_base = &per_cpu(hrtimer_bases, ncpu); - /* - * this BH disable ensures that raise_softirq_irqoff() does - * not wakeup ksoftirqd (and acquire the pi-lock) while - * holding the cpu_base lock - */ - local_bh_disable(); - local_irq_disable(); - old_base = &per_cpu(hrtimer_bases, scpu); - new_base = this_cpu_ptr(&hrtimer_bases); /* * The caller is globally serialized and nobody else * takes two locks at once, deadlock is not possible. */ - raw_spin_lock(&new_base->lock); - raw_spin_lock_nested(&old_base->lock, SINGLE_DEPTH_NESTING); + raw_spin_lock(&old_base->lock); + raw_spin_lock_nested(&new_base->lock, SINGLE_DEPTH_NESTING); for (i = 0; i < HRTIMER_MAX_CLOCK_BASES; i++) { migrate_hrtimer_list(&old_base->clock_base[i], @@ -2252,15 +2245,13 @@ int hrtimers_dead_cpu(unsigned int scpu) * The migration might have changed the first expiring softirq * timer on this CPU. Update it. */ - hrtimer_update_softirq_timer(new_base, false); + __hrtimer_get_next_event(new_base, HRTIMER_ACTIVE_SOFT); + /* Tell the other CPU to retrigger the next event */ + smp_call_function_single(ncpu, retrigger_next_event, NULL, 0); - raw_spin_unlock(&old_base->lock); raw_spin_unlock(&new_base->lock); + raw_spin_unlock(&old_base->lock); - /* Check, if we got expired work to do */ - __hrtimer_peek_ahead_timers(); - local_irq_enable(); - local_bh_enable(); return 0; } -- cgit v1.2.3 From e409d7346648c9acff84c3cc8d291767ee2d5326 Mon Sep 17 00:00:00 2001 From: Jan Kiszka Date: Fri, 10 Nov 2023 17:13:02 +0100 Subject: net: ti: icssg-prueth: Add missing icss_iep_put to error path Analogously to prueth_remove, just also taking care for NULL'ing the iep pointers. Fixes: 186734c15886 ("net: ti: icssg-prueth: add packet timestamping and ptp support") Fixes: 443a2367ba3c ("net: ti: icssg-prueth: am65x SR2.0 add 10M full duplex support") Signed-off-by: Jan Kiszka Reviewed-by: Wojciech Drewek Reviewed-by: MD Danish Anwar Reviewed-by: Roger Quadros Signed-off-by: David S. Miller --- drivers/net/ethernet/ti/icssg/icssg_prueth.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) diff --git a/drivers/net/ethernet/ti/icssg/icssg_prueth.c b/drivers/net/ethernet/ti/icssg/icssg_prueth.c index 6c4b64227ac8..3abbeba26f1b 100644 --- a/drivers/net/ethernet/ti/icssg/icssg_prueth.c +++ b/drivers/net/ethernet/ti/icssg/icssg_prueth.c @@ -2105,10 +2105,7 @@ static int prueth_probe(struct platform_device *pdev) prueth->iep1 = icss_iep_get_idx(np, 1); if (IS_ERR(prueth->iep1)) { ret = dev_err_probe(dev, PTR_ERR(prueth->iep1), "iep1 get failed\n"); - icss_iep_put(prueth->iep0); - prueth->iep0 = NULL; - prueth->iep1 = NULL; - goto free_pool; + goto put_iep0; } if (prueth->pdata.quirk_10m_link_issue) { @@ -2205,6 +2202,12 @@ netdev_exit: exit_iep: if (prueth->pdata.quirk_10m_link_issue) icss_iep_exit_fw(prueth->iep1); + icss_iep_put(prueth->iep1); + +put_iep0: + icss_iep_put(prueth->iep0); + prueth->iep0 = NULL; + prueth->iep1 = NULL; free_pool: gen_pool_free(prueth->sram_pool, -- cgit v1.2.3 From 2bd5b559a1f391f05927bbb0b31381fa71c61e26 Mon Sep 17 00:00:00 2001 From: Jan Kiszka Date: Fri, 10 Nov 2023 17:13:08 +0100 Subject: net: ti: icssg-prueth: Fix error cleanup on failing pruss_request_mem_region We were just continuing in this case, surely not desired. Fixes: 128d5874c082 ("net: ti: icssg-prueth: Add ICSSG ethernet driver") Signed-off-by: Jan Kiszka Reviewed-by: Wojciech Drewek Reviewed-by: Roger Quadros Signed-off-by: David S. Miller --- drivers/net/ethernet/ti/icssg/icssg_prueth.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/ti/icssg/icssg_prueth.c b/drivers/net/ethernet/ti/icssg/icssg_prueth.c index 3abbeba26f1b..411898a4f38c 100644 --- a/drivers/net/ethernet/ti/icssg/icssg_prueth.c +++ b/drivers/net/ethernet/ti/icssg/icssg_prueth.c @@ -2063,7 +2063,7 @@ static int prueth_probe(struct platform_device *pdev) &prueth->shram); if (ret) { dev_err(dev, "unable to get PRUSS SHRD RAM2: %d\n", ret); - pruss_put(prueth->pruss); + goto put_pruss; } prueth->sram_pool = of_gen_pool_get(np, "sram", 0); @@ -2215,6 +2215,8 @@ free_pool: put_mem: pruss_release_mem_region(prueth->pruss, &prueth->shram); + +put_pruss: pruss_put(prueth->pruss); put_cores: -- cgit v1.2.3 From 713f040cd22285fcc506f40a0d259566e6758c3c Mon Sep 17 00:00:00 2001 From: Chandradeep Dey Date: Sat, 11 Nov 2023 19:25:49 +0100 Subject: ALSA: hda/realtek - Enable internal speaker of ASUS K6500ZC Apply the already existing quirk chain ALC294_FIXUP_ASUS_SPK to enable the internal speaker of ASUS K6500ZC. Signed-off-by: Chandradeep Dey Cc: Link: https://lore.kernel.org/r/NizcVHQ--3-9@chandradeepdey.com Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index c7de74396185..cdd808e02b44 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -9907,6 +9907,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x1043, 0x10a1, "ASUS UX391UA", ALC294_FIXUP_ASUS_SPK), SND_PCI_QUIRK(0x1043, 0x10c0, "ASUS X540SA", ALC256_FIXUP_ASUS_MIC), SND_PCI_QUIRK(0x1043, 0x10d0, "ASUS X540LA/X540LJ", ALC255_FIXUP_ASUS_MIC_NO_PRESENCE), + SND_PCI_QUIRK(0x1043, 0x10d3, "ASUS K6500ZC", ALC294_FIXUP_ASUS_SPK), SND_PCI_QUIRK(0x1043, 0x115d, "Asus 1015E", ALC269_FIXUP_LIMIT_INT_MIC_BOOST), SND_PCI_QUIRK(0x1043, 0x11c0, "ASUS X556UR", ALC255_FIXUP_ASUS_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x1043, 0x125e, "ASUS Q524UQK", ALC255_FIXUP_ASUS_MIC_NO_PRESENCE), -- cgit v1.2.3 From 7e8037b099c0bbe8f2109dc452dbcab8d400fc53 Mon Sep 17 00:00:00 2001 From: Saurabh Sengar Date: Sat, 11 Nov 2023 00:37:47 -0800 Subject: x86/hyperv: Fix the detection of E820_TYPE_PRAM in a Gen2 VM A Gen2 VM doesn't support legacy PCI/PCIe, so both raw_pci_ops and raw_pci_ext_ops are NULL, and pci_subsys_init() -> pcibios_init() doesn't call pcibios_resource_survey() -> e820__reserve_resources_late(); as a result, any emulated persistent memory of E820_TYPE_PRAM (12) via the kernel parameter memmap=nn[KMG]!ss is not added into iomem_resource and hence can't be detected by register_e820_pmem(). Fix this by directly calling e820__reserve_resources_late() in hv_pci_init(), which is called from arch_initcall(pci_arch_init). It's ok to move a Gen2 VM's e820__reserve_resources_late() from subsys_initcall(pci_subsys_init) to arch_initcall(pci_arch_init) because the code in-between doesn't depend on the E820 resources. e820__reserve_resources_late() depends on e820__reserve_resources(), which has been called earlier from setup_arch(). For a Gen-2 VM, the new hv_pci_init() also adds any memory of E820_TYPE_PMEM (7) into iomem_resource, and acpi_nfit_register_region() -> acpi_nfit_insert_resource() -> region_intersects() returns REGION_INTERSECTS, so the memory of E820_TYPE_PMEM won't get added twice. Changed the local variable "int gen2vm" to "bool gen2vm". Signed-off-by: Saurabh Sengar Signed-off-by: Dexuan Cui Signed-off-by: Wei Liu Message-ID: <1699691867-9827-1-git-send-email-ssengar@linux.microsoft.com> --- arch/x86/hyperv/hv_init.c | 25 +++++++++++++++++++++---- 1 file changed, 21 insertions(+), 4 deletions(-) diff --git a/arch/x86/hyperv/hv_init.c b/arch/x86/hyperv/hv_init.c index 21556ad87f4b..8f3a4d16bb79 100644 --- a/arch/x86/hyperv/hv_init.c +++ b/arch/x86/hyperv/hv_init.c @@ -15,6 +15,7 @@ #include #include #include +#include #include #include #include @@ -286,15 +287,31 @@ static int hv_cpu_die(unsigned int cpu) static int __init hv_pci_init(void) { - int gen2vm = efi_enabled(EFI_BOOT); + bool gen2vm = efi_enabled(EFI_BOOT); /* - * For Generation-2 VM, we exit from pci_arch_init() by returning 0. - * The purpose is to suppress the harmless warning: + * A Generation-2 VM doesn't support legacy PCI/PCIe, so both + * raw_pci_ops and raw_pci_ext_ops are NULL, and pci_subsys_init() -> + * pcibios_init() doesn't call pcibios_resource_survey() -> + * e820__reserve_resources_late(); as a result, any emulated persistent + * memory of E820_TYPE_PRAM (12) via the kernel parameter + * memmap=nn[KMG]!ss is not added into iomem_resource and hence can't be + * detected by register_e820_pmem(). Fix this by directly calling + * e820__reserve_resources_late() here: e820__reserve_resources_late() + * depends on e820__reserve_resources(), which has been called earlier + * from setup_arch(). Note: e820__reserve_resources_late() also adds + * any memory of E820_TYPE_PMEM (7) into iomem_resource, and + * acpi_nfit_register_region() -> acpi_nfit_insert_resource() -> + * region_intersects() returns REGION_INTERSECTS, so the memory of + * E820_TYPE_PMEM won't get added twice. + * + * We return 0 here so that pci_arch_init() won't print the warning: * "PCI: Fatal: No config space access function found" */ - if (gen2vm) + if (gen2vm) { + e820__reserve_resources_late(); return 0; + } /* For Generation-1 VM, we'll proceed in pci_arch_init(). */ return 1; -- cgit v1.2.3 From 42d62b7e47d58273c64fc1540e5d81ccfdb60f77 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Tue, 24 Oct 2023 17:18:17 +0300 Subject: media: vsp1: Remove unbalanced .s_stream(0) calls The VSP1 driver uses the subdev .s_stream() operation to stop WPF instances, without a corresponding call to start them. The V4L2 subdev core started warning about unbalanced .s_stream() calls in commit 009905ec5043 ("media: v4l2-subdev: Document and enforce .s_stream() requirements"), causing a regression with this driver. Fix the problem by replacing the .s_stream() operation with an explicit function call for WPF instances. This allows sharing an additional data structure between RPF and WPF instances. Fixes: 009905ec5043 ("media: v4l2-subdev: Document and enforce .s_stream() requirements") Reported-by: Geert Uytterhoeven Closes: https://lore.kernel.org/linux-media/2221395-6a9b-9527-d697-e76aebc6af@linux-m68k.org/ Signed-off-by: Laurent Pinchart Tested-by: Geert Uytterhoeven --- drivers/media/platform/renesas/vsp1/vsp1_pipe.c | 2 +- drivers/media/platform/renesas/vsp1/vsp1_rpf.c | 10 +-------- drivers/media/platform/renesas/vsp1/vsp1_rwpf.c | 8 +++++-- drivers/media/platform/renesas/vsp1/vsp1_rwpf.h | 4 +++- drivers/media/platform/renesas/vsp1/vsp1_wpf.c | 29 +++---------------------- 5 files changed, 14 insertions(+), 39 deletions(-) diff --git a/drivers/media/platform/renesas/vsp1/vsp1_pipe.c b/drivers/media/platform/renesas/vsp1/vsp1_pipe.c index f8093ba9539e..68d05243c3ee 100644 --- a/drivers/media/platform/renesas/vsp1/vsp1_pipe.c +++ b/drivers/media/platform/renesas/vsp1/vsp1_pipe.c @@ -373,7 +373,7 @@ int vsp1_pipeline_stop(struct vsp1_pipeline *pipe) (7 << VI6_DPR_SMPPT_TGW_SHIFT) | (VI6_DPR_NODE_UNUSED << VI6_DPR_SMPPT_PT_SHIFT)); - v4l2_subdev_call(&pipe->output->entity.subdev, video, s_stream, 0); + vsp1_wpf_stop(pipe->output); return ret; } diff --git a/drivers/media/platform/renesas/vsp1/vsp1_rpf.c b/drivers/media/platform/renesas/vsp1/vsp1_rpf.c index 3b17f5fa4067..ea12c3f12c92 100644 --- a/drivers/media/platform/renesas/vsp1/vsp1_rpf.c +++ b/drivers/media/platform/renesas/vsp1/vsp1_rpf.c @@ -43,14 +43,6 @@ static inline void vsp1_rpf_write(struct vsp1_rwpf *rpf, data); } -/* ----------------------------------------------------------------------------- - * V4L2 Subdevice Operations - */ - -static const struct v4l2_subdev_ops rpf_ops = { - .pad = &vsp1_rwpf_pad_ops, -}; - /* ----------------------------------------------------------------------------- * VSP1 Entity Operations */ @@ -411,7 +403,7 @@ struct vsp1_rwpf *vsp1_rpf_create(struct vsp1_device *vsp1, unsigned int index) rpf->entity.index = index; sprintf(name, "rpf.%u", index); - ret = vsp1_entity_init(vsp1, &rpf->entity, name, 2, &rpf_ops, + ret = vsp1_entity_init(vsp1, &rpf->entity, name, 2, &vsp1_rwpf_subdev_ops, MEDIA_ENT_F_PROC_VIDEO_PIXEL_FORMATTER); if (ret < 0) return ERR_PTR(ret); diff --git a/drivers/media/platform/renesas/vsp1/vsp1_rwpf.c b/drivers/media/platform/renesas/vsp1/vsp1_rwpf.c index 22a82d218152..e0f87c8103ca 100644 --- a/drivers/media/platform/renesas/vsp1/vsp1_rwpf.c +++ b/drivers/media/platform/renesas/vsp1/vsp1_rwpf.c @@ -24,7 +24,7 @@ struct v4l2_rect *vsp1_rwpf_get_crop(struct vsp1_rwpf *rwpf, } /* ----------------------------------------------------------------------------- - * V4L2 Subdevice Pad Operations + * V4L2 Subdevice Operations */ static int vsp1_rwpf_enum_mbus_code(struct v4l2_subdev *subdev, @@ -243,7 +243,7 @@ done: return ret; } -const struct v4l2_subdev_pad_ops vsp1_rwpf_pad_ops = { +static const struct v4l2_subdev_pad_ops vsp1_rwpf_pad_ops = { .init_cfg = vsp1_entity_init_cfg, .enum_mbus_code = vsp1_rwpf_enum_mbus_code, .enum_frame_size = vsp1_rwpf_enum_frame_size, @@ -253,6 +253,10 @@ const struct v4l2_subdev_pad_ops vsp1_rwpf_pad_ops = { .set_selection = vsp1_rwpf_set_selection, }; +const struct v4l2_subdev_ops vsp1_rwpf_subdev_ops = { + .pad = &vsp1_rwpf_pad_ops, +}; + /* ----------------------------------------------------------------------------- * Controls */ diff --git a/drivers/media/platform/renesas/vsp1/vsp1_rwpf.h b/drivers/media/platform/renesas/vsp1/vsp1_rwpf.h index eac5c04c2239..e0d212c70b2f 100644 --- a/drivers/media/platform/renesas/vsp1/vsp1_rwpf.h +++ b/drivers/media/platform/renesas/vsp1/vsp1_rwpf.h @@ -79,9 +79,11 @@ static inline struct vsp1_rwpf *entity_to_rwpf(struct vsp1_entity *entity) struct vsp1_rwpf *vsp1_rpf_create(struct vsp1_device *vsp1, unsigned int index); struct vsp1_rwpf *vsp1_wpf_create(struct vsp1_device *vsp1, unsigned int index); +void vsp1_wpf_stop(struct vsp1_rwpf *wpf); + int vsp1_rwpf_init_ctrls(struct vsp1_rwpf *rwpf, unsigned int ncontrols); -extern const struct v4l2_subdev_pad_ops vsp1_rwpf_pad_ops; +extern const struct v4l2_subdev_ops vsp1_rwpf_subdev_ops; struct v4l2_rect *vsp1_rwpf_get_crop(struct vsp1_rwpf *rwpf, struct v4l2_subdev_state *sd_state); diff --git a/drivers/media/platform/renesas/vsp1/vsp1_wpf.c b/drivers/media/platform/renesas/vsp1/vsp1_wpf.c index d0074ca00920..cab4445eca69 100644 --- a/drivers/media/platform/renesas/vsp1/vsp1_wpf.c +++ b/drivers/media/platform/renesas/vsp1/vsp1_wpf.c @@ -186,17 +186,13 @@ static int wpf_init_controls(struct vsp1_rwpf *wpf) } /* ----------------------------------------------------------------------------- - * V4L2 Subdevice Core Operations + * VSP1 Entity Operations */ -static int wpf_s_stream(struct v4l2_subdev *subdev, int enable) +void vsp1_wpf_stop(struct vsp1_rwpf *wpf) { - struct vsp1_rwpf *wpf = to_rwpf(subdev); struct vsp1_device *vsp1 = wpf->entity.vsp1; - if (enable) - return 0; - /* * Write to registers directly when stopping the stream as there will be * no pipeline run to apply the display list. @@ -204,27 +200,8 @@ static int wpf_s_stream(struct v4l2_subdev *subdev, int enable) vsp1_write(vsp1, VI6_WPF_IRQ_ENB(wpf->entity.index), 0); vsp1_write(vsp1, wpf->entity.index * VI6_WPF_OFFSET + VI6_WPF_SRCRPF, 0); - - return 0; } -/* ----------------------------------------------------------------------------- - * V4L2 Subdevice Operations - */ - -static const struct v4l2_subdev_video_ops wpf_video_ops = { - .s_stream = wpf_s_stream, -}; - -static const struct v4l2_subdev_ops wpf_ops = { - .video = &wpf_video_ops, - .pad = &vsp1_rwpf_pad_ops, -}; - -/* ----------------------------------------------------------------------------- - * VSP1 Entity Operations - */ - static void vsp1_wpf_destroy(struct vsp1_entity *entity) { struct vsp1_rwpf *wpf = entity_to_rwpf(entity); @@ -583,7 +560,7 @@ struct vsp1_rwpf *vsp1_wpf_create(struct vsp1_device *vsp1, unsigned int index) wpf->entity.index = index; sprintf(name, "wpf.%u", index); - ret = vsp1_entity_init(vsp1, &wpf->entity, name, 2, &wpf_ops, + ret = vsp1_entity_init(vsp1, &wpf->entity, name, 2, &vsp1_rwpf_subdev_ops, MEDIA_ENT_F_PROC_VIDEO_PIXEL_FORMATTER); if (ret < 0) return ERR_PTR(ret); -- cgit v1.2.3 From 7b211c7671212cad0b83603c674838c7e824d845 Mon Sep 17 00:00:00 2001 From: Robert Marko Date: Fri, 10 Nov 2023 10:30:11 +0100 Subject: Revert "i2c: pxa: move to generic GPIO recovery" This reverts commit 0b01392c18b9993a584f36ace1d61118772ad0ca. Conversion of PXA to generic I2C recovery, makes the I2C bus completely lock up if recovery pinctrl is present in the DT and I2C recovery is enabled. So, until the generic I2C recovery can also work with PXA lets revert to have working I2C and I2C recovery again. Signed-off-by: Robert Marko Cc: stable@vger.kernel.org # 5.11+ Acked-by: Andi Shyti Acked-by: Russell King (Oracle) Acked-by: Linus Walleij Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-pxa.c | 76 +++++++++++++++++++++++++++++++++++++++----- 1 file changed, 68 insertions(+), 8 deletions(-) diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c index 1d7648242749..76f79b68cef8 100644 --- a/drivers/i2c/busses/i2c-pxa.c +++ b/drivers/i2c/busses/i2c-pxa.c @@ -265,6 +265,9 @@ struct pxa_i2c { u32 hs_mask; struct i2c_bus_recovery_info recovery; + struct pinctrl *pinctrl; + struct pinctrl_state *pinctrl_default; + struct pinctrl_state *pinctrl_recovery; }; #define _IBMR(i2c) ((i2c)->reg_ibmr) @@ -1299,12 +1302,13 @@ static void i2c_pxa_prepare_recovery(struct i2c_adapter *adap) */ gpiod_set_value(i2c->recovery.scl_gpiod, ibmr & IBMR_SCLS); gpiod_set_value(i2c->recovery.sda_gpiod, ibmr & IBMR_SDAS); + + WARN_ON(pinctrl_select_state(i2c->pinctrl, i2c->pinctrl_recovery)); } static void i2c_pxa_unprepare_recovery(struct i2c_adapter *adap) { struct pxa_i2c *i2c = adap->algo_data; - struct i2c_bus_recovery_info *bri = adap->bus_recovery_info; u32 isr; /* @@ -1318,7 +1322,7 @@ static void i2c_pxa_unprepare_recovery(struct i2c_adapter *adap) i2c_pxa_do_reset(i2c); } - WARN_ON(pinctrl_select_state(bri->pinctrl, bri->pins_default)); + WARN_ON(pinctrl_select_state(i2c->pinctrl, i2c->pinctrl_default)); dev_dbg(&i2c->adap.dev, "recovery: IBMR 0x%08x ISR 0x%08x\n", readl(_IBMR(i2c)), readl(_ISR(i2c))); @@ -1340,20 +1344,76 @@ static int i2c_pxa_init_recovery(struct pxa_i2c *i2c) if (IS_ENABLED(CONFIG_I2C_PXA_SLAVE)) return 0; - bri->pinctrl = devm_pinctrl_get(dev); - if (PTR_ERR(bri->pinctrl) == -ENODEV) { - bri->pinctrl = NULL; + i2c->pinctrl = devm_pinctrl_get(dev); + if (PTR_ERR(i2c->pinctrl) == -ENODEV) + i2c->pinctrl = NULL; + if (IS_ERR(i2c->pinctrl)) + return PTR_ERR(i2c->pinctrl); + + if (!i2c->pinctrl) + return 0; + + i2c->pinctrl_default = pinctrl_lookup_state(i2c->pinctrl, + PINCTRL_STATE_DEFAULT); + i2c->pinctrl_recovery = pinctrl_lookup_state(i2c->pinctrl, "recovery"); + + if (IS_ERR(i2c->pinctrl_default) || IS_ERR(i2c->pinctrl_recovery)) { + dev_info(dev, "missing pinmux recovery information: %ld %ld\n", + PTR_ERR(i2c->pinctrl_default), + PTR_ERR(i2c->pinctrl_recovery)); + return 0; + } + + /* + * Claiming GPIOs can influence the pinmux state, and may glitch the + * I2C bus. Do this carefully. + */ + bri->scl_gpiod = devm_gpiod_get(dev, "scl", GPIOD_OUT_HIGH_OPEN_DRAIN); + if (bri->scl_gpiod == ERR_PTR(-EPROBE_DEFER)) + return -EPROBE_DEFER; + if (IS_ERR(bri->scl_gpiod)) { + dev_info(dev, "missing scl gpio recovery information: %pe\n", + bri->scl_gpiod); + return 0; + } + + /* + * We have SCL. Pull SCL low and wait a bit so that SDA glitches + * have no effect. + */ + gpiod_direction_output(bri->scl_gpiod, 0); + udelay(10); + bri->sda_gpiod = devm_gpiod_get(dev, "sda", GPIOD_OUT_HIGH_OPEN_DRAIN); + + /* Wait a bit in case of a SDA glitch, and then release SCL. */ + udelay(10); + gpiod_direction_output(bri->scl_gpiod, 1); + + if (bri->sda_gpiod == ERR_PTR(-EPROBE_DEFER)) + return -EPROBE_DEFER; + + if (IS_ERR(bri->sda_gpiod)) { + dev_info(dev, "missing sda gpio recovery information: %pe\n", + bri->sda_gpiod); return 0; } - if (IS_ERR(bri->pinctrl)) - return PTR_ERR(bri->pinctrl); bri->prepare_recovery = i2c_pxa_prepare_recovery; bri->unprepare_recovery = i2c_pxa_unprepare_recovery; + bri->recover_bus = i2c_generic_scl_recovery; i2c->adap.bus_recovery_info = bri; - return 0; + /* + * Claiming GPIOs can change the pinmux state, which confuses the + * pinctrl since pinctrl's idea of the current setting is unaffected + * by the pinmux change caused by claiming the GPIO. Work around that + * by switching pinctrl to the GPIO state here. We do it this way to + * avoid glitching the I2C bus. + */ + pinctrl_select_state(i2c->pinctrl, i2c->pinctrl_recovery); + + return pinctrl_select_state(i2c->pinctrl, i2c->pinctrl_default); } static int i2c_pxa_probe(struct platform_device *dev) -- cgit v1.2.3 From 2a5db859c6825b5d50377dda9c3cc729c20cad43 Mon Sep 17 00:00:00 2001 From: Long Li Date: Mon, 31 Jul 2023 20:46:17 +0800 Subject: xfs: factor out xfs_defer_pending_abort Factor out xfs_defer_pending_abort() from xfs_defer_trans_abort(), which not use transaction parameter, so it can be used after the transaction life cycle. Signed-off-by: Long Li Reviewed-by: Darrick J. Wong Signed-off-by: Chandan Babu R --- fs/xfs/libxfs/xfs_defer.c | 23 +++++++++++++++-------- 1 file changed, 15 insertions(+), 8 deletions(-) diff --git a/fs/xfs/libxfs/xfs_defer.c b/fs/xfs/libxfs/xfs_defer.c index bcfb6a4203cd..88388e12f8e7 100644 --- a/fs/xfs/libxfs/xfs_defer.c +++ b/fs/xfs/libxfs/xfs_defer.c @@ -245,21 +245,18 @@ xfs_defer_create_intents( return ret; } -/* Abort all the intents that were committed. */ STATIC void -xfs_defer_trans_abort( - struct xfs_trans *tp, - struct list_head *dop_pending) +xfs_defer_pending_abort( + struct xfs_mount *mp, + struct list_head *dop_list) { struct xfs_defer_pending *dfp; const struct xfs_defer_op_type *ops; - trace_xfs_defer_trans_abort(tp, _RET_IP_); - /* Abort intent items that don't have a done item. */ - list_for_each_entry(dfp, dop_pending, dfp_list) { + list_for_each_entry(dfp, dop_list, dfp_list) { ops = defer_op_types[dfp->dfp_type]; - trace_xfs_defer_pending_abort(tp->t_mountp, dfp); + trace_xfs_defer_pending_abort(mp, dfp); if (dfp->dfp_intent && !dfp->dfp_done) { ops->abort_intent(dfp->dfp_intent); dfp->dfp_intent = NULL; @@ -267,6 +264,16 @@ xfs_defer_trans_abort( } } +/* Abort all the intents that were committed. */ +STATIC void +xfs_defer_trans_abort( + struct xfs_trans *tp, + struct list_head *dop_pending) +{ + trace_xfs_defer_trans_abort(tp, _RET_IP_); + xfs_defer_pending_abort(tp->t_mountp, dop_pending); +} + /* * Capture resources that the caller said not to release ("held") when the * transaction commits. Caller is responsible for zero-initializing @dres. -- cgit v1.2.3 From f8f9d952e42dd49ae534f61f2fa7ca0876cb9848 Mon Sep 17 00:00:00 2001 From: Long Li Date: Mon, 31 Jul 2023 20:46:18 +0800 Subject: xfs: abort intent items when recovery intents fail When recovering intents, we capture newly created intent items as part of committing recovered intent items. If intent recovery fails at a later point, we forget to remove those newly created intent items from the AIL and hang: [root@localhost ~]# cat /proc/539/stack [<0>] xfs_ail_push_all_sync+0x174/0x230 [<0>] xfs_unmount_flush_inodes+0x8d/0xd0 [<0>] xfs_mountfs+0x15f7/0x1e70 [<0>] xfs_fs_fill_super+0x10ec/0x1b20 [<0>] get_tree_bdev+0x3c8/0x730 [<0>] vfs_get_tree+0x89/0x2c0 [<0>] path_mount+0xecf/0x1800 [<0>] do_mount+0xf3/0x110 [<0>] __x64_sys_mount+0x154/0x1f0 [<0>] do_syscall_64+0x39/0x80 [<0>] entry_SYSCALL_64_after_hwframe+0x63/0xcd When newly created intent items fail to commit via transaction, intent recovery hasn't created done items for these newly created intent items, so the capture structure is the sole owner of the captured intent items. We must release them explicitly or else they leak: unreferenced object 0xffff888016719108 (size 432): comm "mount", pid 529, jiffies 4294706839 (age 144.463s) hex dump (first 32 bytes): 08 91 71 16 80 88 ff ff 08 91 71 16 80 88 ff ff ..q.......q..... 18 91 71 16 80 88 ff ff 18 91 71 16 80 88 ff ff ..q.......q..... backtrace: [] xfs_efi_init+0x18f/0x1d0 [] xfs_extent_free_create_intent+0x50/0x150 [] xfs_defer_create_intents+0x16a/0x340 [] xfs_defer_ops_capture_and_commit+0x8e/0xad0 [] xfs_cui_item_recover+0x819/0x980 [] xlog_recover_process_intents+0x246/0xb70 [] xlog_recover_finish+0x8a/0x9a0 [] xfs_log_mount_finish+0x2bb/0x4a0 [] xfs_mountfs+0x14bf/0x1e70 [] xfs_fs_fill_super+0x10d0/0x1b20 [] get_tree_bdev+0x3d2/0x6d0 [] vfs_get_tree+0x89/0x2c0 [] path_mount+0xecf/0x1800 [] do_mount+0xf3/0x110 [] __x64_sys_mount+0x154/0x1f0 [] do_syscall_64+0x39/0x80 Fix the problem above by abort intent items that don't have a done item when recovery intents fail. Fixes: e6fff81e4870 ("xfs: proper replay of deferred ops queued during log recovery") Signed-off-by: Long Li Reviewed-by: Darrick J. Wong Signed-off-by: Chandan Babu R --- fs/xfs/libxfs/xfs_defer.c | 5 +++-- fs/xfs/libxfs/xfs_defer.h | 2 +- fs/xfs/xfs_log_recover.c | 2 +- 3 files changed, 5 insertions(+), 4 deletions(-) diff --git a/fs/xfs/libxfs/xfs_defer.c b/fs/xfs/libxfs/xfs_defer.c index 88388e12f8e7..f71679ce23b9 100644 --- a/fs/xfs/libxfs/xfs_defer.c +++ b/fs/xfs/libxfs/xfs_defer.c @@ -763,12 +763,13 @@ xfs_defer_ops_capture( /* Release all resources that we used to capture deferred ops. */ void -xfs_defer_ops_capture_free( +xfs_defer_ops_capture_abort( struct xfs_mount *mp, struct xfs_defer_capture *dfc) { unsigned short i; + xfs_defer_pending_abort(mp, &dfc->dfc_dfops); xfs_defer_cancel_list(mp, &dfc->dfc_dfops); for (i = 0; i < dfc->dfc_held.dr_bufs; i++) @@ -809,7 +810,7 @@ xfs_defer_ops_capture_and_commit( /* Commit the transaction and add the capture structure to the list. */ error = xfs_trans_commit(tp); if (error) { - xfs_defer_ops_capture_free(mp, dfc); + xfs_defer_ops_capture_abort(mp, dfc); return error; } diff --git a/fs/xfs/libxfs/xfs_defer.h b/fs/xfs/libxfs/xfs_defer.h index 114a3a4930a3..8788ad5f6a73 100644 --- a/fs/xfs/libxfs/xfs_defer.h +++ b/fs/xfs/libxfs/xfs_defer.h @@ -121,7 +121,7 @@ int xfs_defer_ops_capture_and_commit(struct xfs_trans *tp, struct list_head *capture_list); void xfs_defer_ops_continue(struct xfs_defer_capture *d, struct xfs_trans *tp, struct xfs_defer_resources *dres); -void xfs_defer_ops_capture_free(struct xfs_mount *mp, +void xfs_defer_ops_capture_abort(struct xfs_mount *mp, struct xfs_defer_capture *d); void xfs_defer_resources_rele(struct xfs_defer_resources *dres); diff --git a/fs/xfs/xfs_log_recover.c b/fs/xfs/xfs_log_recover.c index 13b94d2e605b..a1e18b24971a 100644 --- a/fs/xfs/xfs_log_recover.c +++ b/fs/xfs/xfs_log_recover.c @@ -2511,7 +2511,7 @@ xlog_abort_defer_ops( list_for_each_entry_safe(dfc, next, capture_list, dfc_list) { list_del_init(&dfc->dfc_list); - xfs_defer_ops_capture_free(mp, dfc); + xfs_defer_ops_capture_abort(mp, dfc); } } -- cgit v1.2.3 From 00080503612f61d1ad67be641ed9cb4f9f6ba40e Mon Sep 17 00:00:00 2001 From: "Matthew Wilcox (Oracle)" Date: Tue, 19 Sep 2023 17:12:45 -0400 Subject: XFS: Update MAINTAINERS to catch all XFS documentation Assumes that all XFS documentation will be prefixed with xfs-, which seems like a good policy anyway. Reviewed-by: Dave Chinner Reviewed-by: Darrick J. Wong Signed-off-by: Matthew Wilcox (Oracle) Signed-off-by: Chandan Babu R --- MAINTAINERS | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index 97f51d5ec1cf..a78795dc9aee 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -23872,8 +23872,7 @@ T: git git://git.kernel.org/pub/scm/fs/xfs/xfs-linux.git P: Documentation/filesystems/xfs-maintainer-entry-profile.rst F: Documentation/ABI/testing/sysfs-fs-xfs F: Documentation/admin-guide/xfs.rst -F: Documentation/filesystems/xfs-delayed-logging-design.rst -F: Documentation/filesystems/xfs-self-describing-metadata.rst +F: Documentation/filesystems/xfs-* F: fs/xfs/ F: include/uapi/linux/dqblk_xfs.h F: include/uapi/linux/fsmap.h -- cgit v1.2.3 From 55f669f34184ecb25b8353f29c7f6f1ae5b313d1 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Mon, 16 Oct 2023 17:28:52 +0200 Subject: xfs: only remap the written blocks in xfs_reflink_end_cow_extent xfs_reflink_end_cow_extent looks up the COW extent and the data fork extent at offset_fsb, and then proceeds to remap the common subset between the two. It does however not limit the remapped extent to the passed in [*offset_fsbm end_fsb] range and thus potentially remaps more blocks than the one handled by the current I/O completion. This means that with sufficiently large data and COW extents we could be remapping COW fork mappings that have not been written to, leading to a stale data exposure on a powerfail event. We use to have a xfs_trim_range to make the remap fit the I/O completion range, but that got (apparently accidentally) removed in commit df2fd88f8ac7 ("xfs: rewrite xfs_reflink_end_cow to use intents"). Note that I've only found this by code inspection, and a test case would probably require very specific delay and error injection. Fixes: df2fd88f8ac7 ("xfs: rewrite xfs_reflink_end_cow to use intents") Signed-off-by: Christoph Hellwig Reviewed-by: "Darrick J. Wong" Signed-off-by: Chandan Babu R --- fs/xfs/xfs_reflink.c | 1 + 1 file changed, 1 insertion(+) diff --git a/fs/xfs/xfs_reflink.c b/fs/xfs/xfs_reflink.c index 658edee8381d..e5b62dc28466 100644 --- a/fs/xfs/xfs_reflink.c +++ b/fs/xfs/xfs_reflink.c @@ -784,6 +784,7 @@ xfs_reflink_end_cow_extent( } } del = got; + xfs_trim_extent(&del, *offset_fsb, end_fsb - *offset_fsb); /* Grab the corresponding mapping in the data fork. */ nmaps = 1; -- cgit v1.2.3 From 471de20303dda0b67981e06d59cc6c4a83fd2a3c Mon Sep 17 00:00:00 2001 From: Leah Rumancik Date: Mon, 30 Oct 2023 13:33:49 -0700 Subject: xfs: up(ic_sema) if flushing data device fails We flush the data device cache before we issue external log IO. If the flush fails, we shut down the log immediately and return. However, the iclog->ic_sema is left in a decremented state so let's add an up(). Prior to this patch, xfs/438 would fail consistently when running with an external log device: sync -> xfs_log_force -> xlog_write_iclog -> down(&iclog->ic_sema) -> blkdev_issue_flush (fail causes us to intiate shutdown) -> xlog_force_shutdown -> return unmount -> xfs_log_umount -> xlog_wait_iclog_completion -> down(&iclog->ic_sema) --------> HANG There is a second early return / shutdown. Make sure the up() happens for it as well. Also make sure we cleanup the iclog state, xlog_state_done_syncing, before dropping the iclog lock. Fixes: b5d721eaae47 ("xfs: external logs need to flush data device") Fixes: 842a42d126b4 ("xfs: shutdown on failure to add page to log bio") Fixes: 7d839e325af2 ("xfs: check return codes when flushing block devices") Signed-off-by: Leah Rumancik Reviewed-by: "Darrick J. Wong" Signed-off-by: Chandan Babu R --- fs/xfs/xfs_log.c | 23 ++++++++++++----------- 1 file changed, 12 insertions(+), 11 deletions(-) diff --git a/fs/xfs/xfs_log.c b/fs/xfs/xfs_log.c index 51c100c86177..ee206facf0dc 100644 --- a/fs/xfs/xfs_log.c +++ b/fs/xfs/xfs_log.c @@ -1893,9 +1893,7 @@ xlog_write_iclog( * the buffer manually, the code needs to be kept in sync * with the I/O completion path. */ - xlog_state_done_syncing(iclog); - up(&iclog->ic_sema); - return; + goto sync; } /* @@ -1925,20 +1923,17 @@ xlog_write_iclog( * avoid shutdown re-entering this path and erroring out again. */ if (log->l_targ != log->l_mp->m_ddev_targp && - blkdev_issue_flush(log->l_mp->m_ddev_targp->bt_bdev)) { - xlog_force_shutdown(log, SHUTDOWN_LOG_IO_ERROR); - return; - } + blkdev_issue_flush(log->l_mp->m_ddev_targp->bt_bdev)) + goto shutdown; } if (iclog->ic_flags & XLOG_ICL_NEED_FUA) iclog->ic_bio.bi_opf |= REQ_FUA; iclog->ic_flags &= ~(XLOG_ICL_NEED_FLUSH | XLOG_ICL_NEED_FUA); - if (xlog_map_iclog_data(&iclog->ic_bio, iclog->ic_data, count)) { - xlog_force_shutdown(log, SHUTDOWN_LOG_IO_ERROR); - return; - } + if (xlog_map_iclog_data(&iclog->ic_bio, iclog->ic_data, count)) + goto shutdown; + if (is_vmalloc_addr(iclog->ic_data)) flush_kernel_vmap_range(iclog->ic_data, count); @@ -1959,6 +1954,12 @@ xlog_write_iclog( } submit_bio(&iclog->ic_bio); + return; +shutdown: + xlog_force_shutdown(log, SHUTDOWN_LOG_IO_ERROR); +sync: + xlog_state_done_syncing(iclog); + up(&iclog->ic_sema); } /* -- cgit v1.2.3 From f63a5b3769ad7659da4c0420751d78958ab97675 Mon Sep 17 00:00:00 2001 From: Omar Sandoval Date: Wed, 1 Nov 2023 09:41:45 -0700 Subject: xfs: fix internal error from AGFL exhaustion We've been seeing XFS errors like the following: XFS: Internal error i != 1 at line 3526 of file fs/xfs/libxfs/xfs_btree.c. Caller xfs_btree_insert+0x1ec/0x280 ... Call Trace: xfs_corruption_error+0x94/0xa0 xfs_btree_insert+0x221/0x280 xfs_alloc_fixup_trees+0x104/0x3e0 xfs_alloc_ag_vextent_size+0x667/0x820 xfs_alloc_fix_freelist+0x5d9/0x750 xfs_free_extent_fix_freelist+0x65/0xa0 __xfs_free_extent+0x57/0x180 ... This is the XFS_IS_CORRUPT() check in xfs_btree_insert() when xfs_btree_insrec() fails. After converting this into a panic and dissecting the core dump, I found that xfs_btree_insrec() is failing because it's trying to split a leaf node in the cntbt when the AG free list is empty. In particular, it's failing to get a block from the AGFL _while trying to refill the AGFL_. If a single operation splits every level of the bnobt and the cntbt (and the rmapbt if it is enabled) at once, the free list will be empty. Then, when the next operation tries to refill the free list, it allocates space. If the allocation does not use a full extent, it will need to insert records for the remaining space in the bnobt and cntbt. And if those new records go in full leaves, the leaves (and potentially more nodes up to the old root) need to be split. Fix it by accounting for the additional splits that may be required to refill the free list in the calculation for the minimum free list size. P.S. As far as I can tell, this bug has existed for a long time -- maybe back to xfs-history commit afdf80ae7405 ("Add XFS_AG_MAXLEVELS macros ...") in April 1994! It requires a very unlucky sequence of events, and in fact we didn't hit it until a particular sparse mmap workload updated from 5.12 to 5.19. But this bug existed in 5.12, so it must've been exposed by some other change in allocation or writeback patterns. It's also much less likely to be hit with the rmapbt enabled, since that increases the minimum free list size and is unlikely to split at the same time as the bnobt and cntbt. Reviewed-by: "Darrick J. Wong" Reviewed-by: Dave Chinner Signed-off-by: Omar Sandoval Signed-off-by: Chandan Babu R --- fs/xfs/libxfs/xfs_alloc.c | 27 ++++++++++++++++++++++++--- 1 file changed, 24 insertions(+), 3 deletions(-) diff --git a/fs/xfs/libxfs/xfs_alloc.c b/fs/xfs/libxfs/xfs_alloc.c index 3069194527dd..100ab5931b31 100644 --- a/fs/xfs/libxfs/xfs_alloc.c +++ b/fs/xfs/libxfs/xfs_alloc.c @@ -2275,16 +2275,37 @@ xfs_alloc_min_freelist( ASSERT(mp->m_alloc_maxlevels > 0); + /* + * For a btree shorter than the maximum height, the worst case is that + * every level gets split and a new level is added, then while inserting + * another entry to refill the AGFL, every level under the old root gets + * split again. This is: + * + * (full height split reservation) + (AGFL refill split height) + * = (current height + 1) + (current height - 1) + * = (new height) + (new height - 2) + * = 2 * new height - 2 + * + * For a btree of maximum height, the worst case is that every level + * under the root gets split, then while inserting another entry to + * refill the AGFL, every level under the root gets split again. This is + * also: + * + * 2 * (current height - 1) + * = 2 * (new height - 1) + * = 2 * new height - 2 + */ + /* space needed by-bno freespace btree */ min_free = min_t(unsigned int, levels[XFS_BTNUM_BNOi] + 1, - mp->m_alloc_maxlevels); + mp->m_alloc_maxlevels) * 2 - 2; /* space needed by-size freespace btree */ min_free += min_t(unsigned int, levels[XFS_BTNUM_CNTi] + 1, - mp->m_alloc_maxlevels); + mp->m_alloc_maxlevels) * 2 - 2; /* space needed reverse mapping used space btree */ if (xfs_has_rmapbt(mp)) min_free += min_t(unsigned int, levels[XFS_BTNUM_RMAPi] + 1, - mp->m_rmap_maxlevels); + mp->m_rmap_maxlevels) * 2 - 2; return min_free; } -- cgit v1.2.3 From a2e4388adfa44684c7c428a5a5980efe0d75e13e Mon Sep 17 00:00:00 2001 From: Anthony Iliopoulos Date: Sun, 5 Nov 2023 20:23:18 +0100 Subject: xfs: fix again select in kconfig XFS_ONLINE_SCRUB_STATS MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Commit 57c0f4a8ea3a attempted to fix the select in the kconfig entry XFS_ONLINE_SCRUB_STATS by selecting XFS_DEBUG, but the original intention was to select DEBUG_FS, since the feature relies on debugfs to export the related scrub statistics. Fixes: 57c0f4a8ea3a ("xfs: fix select in config XFS_ONLINE_SCRUB_STATS") Reported-by: Holger Hoffstätte Signed-off-by: Anthony Iliopoulos Reviewed-by: Dave Chinner Reviewed-by: "Darrick J. Wong" Signed-off-by: Chandan Babu R --- fs/xfs/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/xfs/Kconfig b/fs/xfs/Kconfig index ed0bc8cbc703..567fb37274d3 100644 --- a/fs/xfs/Kconfig +++ b/fs/xfs/Kconfig @@ -147,7 +147,7 @@ config XFS_ONLINE_SCRUB_STATS bool "XFS online metadata check usage data collection" default y depends on XFS_ONLINE_SCRUB - select XFS_DEBUG + select DEBUG_FS help If you say Y here, the kernel will gather usage data about the online metadata check subsystem. This includes the number -- cgit v1.2.3 From 038ca189c0d2c1570b4d922f25b524007c85cf94 Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Fri, 10 Nov 2023 15:33:13 +1100 Subject: xfs: inode recovery does not validate the recovered inode Discovered when trying to track down a weird recovery corruption issue that wasn't detected at recovery time. The specific corruption was a zero extent count field when big extent counts are in use, and it turns out the dinode verifier doesn't detect that specific corruption case, either. So fix it too. Signed-off-by: Dave Chinner Reviewed-by: "Darrick J. Wong" Signed-off-by: Chandan Babu R --- fs/xfs/libxfs/xfs_inode_buf.c | 3 +++ fs/xfs/xfs_inode_item_recover.c | 14 +++++++++++++- 2 files changed, 16 insertions(+), 1 deletion(-) diff --git a/fs/xfs/libxfs/xfs_inode_buf.c b/fs/xfs/libxfs/xfs_inode_buf.c index 543f3748c2a3..137a65bda95d 100644 --- a/fs/xfs/libxfs/xfs_inode_buf.c +++ b/fs/xfs/libxfs/xfs_inode_buf.c @@ -510,6 +510,9 @@ xfs_dinode_verify( if (mode && nextents + naextents > nblocks) return __this_address; + if (nextents + naextents == 0 && nblocks != 0) + return __this_address; + if (S_ISDIR(mode) && nextents > mp->m_dir_geo->max_extents) return __this_address; diff --git a/fs/xfs/xfs_inode_item_recover.c b/fs/xfs/xfs_inode_item_recover.c index 0e5dba2343ea..1c5ba2a732b0 100644 --- a/fs/xfs/xfs_inode_item_recover.c +++ b/fs/xfs/xfs_inode_item_recover.c @@ -286,6 +286,7 @@ xlog_recover_inode_commit_pass2( struct xfs_log_dinode *ldip; uint isize; int need_free = 0; + xfs_failaddr_t fa; if (item->ri_buf[0].i_len == sizeof(struct xfs_inode_log_format)) { in_f = item->ri_buf[0].i_addr; @@ -528,8 +529,19 @@ out_owner_change: (dip->di_mode != 0)) error = xfs_recover_inode_owner_change(mp, dip, in_f, buffer_list); - /* re-generate the checksum. */ + /* re-generate the checksum and validate the recovered inode. */ xfs_dinode_calc_crc(log->l_mp, dip); + fa = xfs_dinode_verify(log->l_mp, in_f->ilf_ino, dip); + if (fa) { + XFS_CORRUPTION_ERROR( + "Bad dinode after recovery", + XFS_ERRLEVEL_LOW, mp, dip, sizeof(*dip)); + xfs_alert(mp, + "Metadata corruption detected at %pS, inode 0x%llx", + fa, in_f->ilf_ino); + error = -EFSCORRUPTED; + goto out_release; + } ASSERT(bp->b_mount == mp); bp->b_flags |= _XBF_LOGRECOVERY; -- cgit v1.2.3 From 7930d9e103700cde15833638855b750715c12091 Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Fri, 10 Nov 2023 15:33:14 +1100 Subject: xfs: recovery should not clear di_flushiter unconditionally Because on v3 inodes, di_flushiter doesn't exist. It overlaps with zero padding in the inode, except when NREXT64=1 configurations are in use and the zero padding is no longer padding but holds the 64 bit extent counter. This manifests obviously on big endian platforms (e.g. s390) because the log dinode is in host order and the overlap is the LSBs of the extent count field. It is not noticed on little endian machines because the overlap is at the MSB end of the extent count field and we need to get more than 2^^48 extents in the inode before it manifests. i.e. the heat death of the universe will occur before we see the problem in little endian machines. This is a zero-day issue for NREXT64=1 configuraitons on big endian machines. Fix it by only clearing di_flushiter on v2 inodes during recovery. Fixes: 9b7d16e34bbe ("xfs: Introduce XFS_DIFLAG2_NREXT64 and associated helpers") cc: stable@kernel.org # 5.19+ Signed-off-by: Dave Chinner Reviewed-by: "Darrick J. Wong" Signed-off-by: Chandan Babu R --- fs/xfs/xfs_inode_item_recover.c | 32 +++++++++++++++++--------------- 1 file changed, 17 insertions(+), 15 deletions(-) diff --git a/fs/xfs/xfs_inode_item_recover.c b/fs/xfs/xfs_inode_item_recover.c index 1c5ba2a732b0..144198a6b270 100644 --- a/fs/xfs/xfs_inode_item_recover.c +++ b/fs/xfs/xfs_inode_item_recover.c @@ -370,24 +370,26 @@ xlog_recover_inode_commit_pass2( * superblock flag to determine whether we need to look at di_flushiter * to skip replay when the on disk inode is newer than the log one */ - if (!xfs_has_v3inodes(mp) && - ldip->di_flushiter < be16_to_cpu(dip->di_flushiter)) { - /* - * Deal with the wrap case, DI_MAX_FLUSH is less - * than smaller numbers - */ - if (be16_to_cpu(dip->di_flushiter) == DI_MAX_FLUSH && - ldip->di_flushiter < (DI_MAX_FLUSH >> 1)) { - /* do nothing */ - } else { - trace_xfs_log_recover_inode_skip(log, in_f); - error = 0; - goto out_release; + if (!xfs_has_v3inodes(mp)) { + if (ldip->di_flushiter < be16_to_cpu(dip->di_flushiter)) { + /* + * Deal with the wrap case, DI_MAX_FLUSH is less + * than smaller numbers + */ + if (be16_to_cpu(dip->di_flushiter) == DI_MAX_FLUSH && + ldip->di_flushiter < (DI_MAX_FLUSH >> 1)) { + /* do nothing */ + } else { + trace_xfs_log_recover_inode_skip(log, in_f); + error = 0; + goto out_release; + } } + + /* Take the opportunity to reset the flush iteration count */ + ldip->di_flushiter = 0; } - /* Take the opportunity to reset the flush iteration count */ - ldip->di_flushiter = 0; if (unlikely(S_ISREG(ldip->di_mode))) { if ((ldip->di_format != XFS_DINODE_FMT_EXTENTS) && -- cgit v1.2.3 From e64e7c74b99ec9e439abca75f522f4b98f220bd1 Mon Sep 17 00:00:00 2001 From: Juergen Gross Date: Tue, 24 Oct 2023 13:51:36 +0200 Subject: xen/events: avoid using info_for_irq() in xen_send_IPI_one() xen_send_IPI_one() is being used by cpuhp_report_idle_dead() after it calls rcu_report_dead(), meaning that any RCU usage by xen_send_IPI_one() is a bad idea. Unfortunately xen_send_IPI_one() is using notify_remote_via_irq() today, which is using irq_get_chip_data() via info_for_irq(). And irq_get_chip_data() in turn is using a maple-tree lookup requiring RCU. Avoid this problem by caching the ipi event channels in another percpu variable, allowing the use notify_remote_via_evtchn() in xen_send_IPI_one(). Fixes: 721255b9826b ("genirq: Use a maple tree for interrupt descriptor management") Reported-by: David Woodhouse Signed-off-by: Juergen Gross Tested-by: David Woodhouse Acked-by: Stefano Stabellini Signed-off-by: Juergen Gross --- drivers/xen/events/events_base.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) diff --git a/drivers/xen/events/events_base.c b/drivers/xen/events/events_base.c index 6de6b084ea60..237e6b884f72 100644 --- a/drivers/xen/events/events_base.c +++ b/drivers/xen/events/events_base.c @@ -164,6 +164,8 @@ static DEFINE_PER_CPU(int [NR_VIRQS], virq_to_irq) = {[0 ... NR_VIRQS-1] = -1}; /* IRQ <-> IPI mapping */ static DEFINE_PER_CPU(int [XEN_NR_IPIS], ipi_to_irq) = {[0 ... XEN_NR_IPIS-1] = -1}; +/* Cache for IPI event channels - needed for hot cpu unplug (avoid RCU usage). */ +static DEFINE_PER_CPU(evtchn_port_t [XEN_NR_IPIS], ipi_to_evtchn) = {[0 ... XEN_NR_IPIS-1] = 0}; /* Event channel distribution data */ static atomic_t channels_on_cpu[NR_CPUS]; @@ -366,6 +368,7 @@ static int xen_irq_info_ipi_setup(unsigned cpu, info->u.ipi = ipi; per_cpu(ipi_to_irq, cpu)[ipi] = irq; + per_cpu(ipi_to_evtchn, cpu)[ipi] = evtchn; return xen_irq_info_common_setup(info, irq, IRQT_IPI, evtchn, 0); } @@ -981,6 +984,7 @@ static void __unbind_from_irq(unsigned int irq) break; case IRQT_IPI: per_cpu(ipi_to_irq, cpu)[ipi_from_irq(irq)] = -1; + per_cpu(ipi_to_evtchn, cpu)[ipi_from_irq(irq)] = 0; break; case IRQT_EVTCHN: dev = info->u.interdomain; @@ -1632,7 +1636,7 @@ EXPORT_SYMBOL_GPL(evtchn_put); void xen_send_IPI_one(unsigned int cpu, enum ipi_vector vector) { - int irq; + evtchn_port_t evtchn; #ifdef CONFIG_X86 if (unlikely(vector == XEN_NMI_VECTOR)) { @@ -1643,9 +1647,9 @@ void xen_send_IPI_one(unsigned int cpu, enum ipi_vector vector) return; } #endif - irq = per_cpu(ipi_to_irq, cpu)[vector]; - BUG_ON(irq < 0); - notify_remote_via_irq(irq); + evtchn = per_cpu(ipi_to_evtchn, cpu)[vector]; + BUG_ON(evtchn == 0); + notify_remote_via_evtchn(evtchn); } struct evtchn_loop_ctrl { -- cgit v1.2.3 From bfa993b355d33a438a746523e7129391c8664e8a Mon Sep 17 00:00:00 2001 From: Roger Pau Monne Date: Wed, 8 Nov 2023 16:25:15 -0500 Subject: acpi/processor: sanitize _OSC/_PDC capabilities for Xen dom0 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The Processor capability bits notify ACPI of the OS capabilities, and so ACPI can adjust the return of other Processor methods taking the OS capabilities into account. When Linux is running as a Xen dom0, the hypervisor is the entity in charge of processor power management, and hence Xen needs to make sure the capabilities reported by _OSC/_PDC match the capabilities of the driver in Xen. Introduce a small helper to sanitize the buffer when running as Xen dom0. When Xen supports HWP, this serves as the equivalent of commit a21211672c9a ("ACPI / processor: Request native thermal interrupt handling via _OSC") to avoid SMM crashes. Xen will set bit ACPI_PROC_CAP_COLLAB_PROC_PERF (bit 12) in the capability bits and the _OSC/_PDC call will apply it. [ jandryuk: Mention Xen HWP's need. Support _OSC & _PDC ] Signed-off-by: Roger Pau Monné Cc: stable@vger.kernel.org Signed-off-by: Jason Andryuk Reviewed-by: Michal Wilczynski Reviewed-by: Juergen Gross Link: https://lore.kernel.org/r/20231108212517.72279-1-jandryuk@gmail.com Signed-off-by: Juergen Gross --- arch/x86/include/asm/acpi.h | 14 ++++++++++++++ arch/x86/include/asm/xen/hypervisor.h | 9 +++++++++ drivers/xen/pcpu.c | 22 ++++++++++++++++++++++ 3 files changed, 45 insertions(+) diff --git a/arch/x86/include/asm/acpi.h b/arch/x86/include/asm/acpi.h index c8a7fc23f63c..f896eed4516c 100644 --- a/arch/x86/include/asm/acpi.h +++ b/arch/x86/include/asm/acpi.h @@ -16,6 +16,9 @@ #include #include #include +#include + +#include #ifdef CONFIG_ACPI_APEI # include @@ -127,6 +130,17 @@ static inline void arch_acpi_set_proc_cap_bits(u32 *cap) if (!cpu_has(c, X86_FEATURE_MWAIT) || boot_option_idle_override == IDLE_NOMWAIT) *cap &= ~(ACPI_PROC_CAP_C_C1_FFH | ACPI_PROC_CAP_C_C2C3_FFH); + + if (xen_initial_domain()) { + /* + * When Linux is running as Xen dom0, the hypervisor is the + * entity in charge of the processor power management, and so + * Xen needs to check the OS capabilities reported in the + * processor capabilities buffer matches what the hypervisor + * driver supports. + */ + xen_sanitize_proc_cap_bits(cap); + } } static inline bool acpi_has_cpu_in_madt(void) diff --git a/arch/x86/include/asm/xen/hypervisor.h b/arch/x86/include/asm/xen/hypervisor.h index 7048dfacc04b..a9088250770f 100644 --- a/arch/x86/include/asm/xen/hypervisor.h +++ b/arch/x86/include/asm/xen/hypervisor.h @@ -100,4 +100,13 @@ static inline void leave_lazy(enum xen_lazy_mode mode) enum xen_lazy_mode xen_get_lazy_mode(void); +#if defined(CONFIG_XEN_DOM0) && defined(CONFIG_ACPI) +void xen_sanitize_proc_cap_bits(uint32_t *buf); +#else +static inline void xen_sanitize_proc_cap_bits(uint32_t *buf) +{ + BUG(); +} +#endif + #endif /* _ASM_X86_XEN_HYPERVISOR_H */ diff --git a/drivers/xen/pcpu.c b/drivers/xen/pcpu.c index b3e3d1bb37f3..508655273145 100644 --- a/drivers/xen/pcpu.c +++ b/drivers/xen/pcpu.c @@ -47,6 +47,9 @@ #include #include +#ifdef CONFIG_ACPI +#include +#endif /* * @cpu_id: Xen physical cpu logic number @@ -400,4 +403,23 @@ bool __init xen_processor_present(uint32_t acpi_id) return online; } + +void xen_sanitize_proc_cap_bits(uint32_t *cap) +{ + struct xen_platform_op op = { + .cmd = XENPF_set_processor_pminfo, + .u.set_pminfo.id = -1, + .u.set_pminfo.type = XEN_PM_PDC, + }; + u32 buf[3] = { ACPI_PDC_REVISION_ID, 1, *cap }; + int ret; + + set_xen_guest_handle(op.u.set_pminfo.pdc, buf); + ret = HYPERVISOR_platform_op(&op); + if (ret) + pr_err("sanitize of _PDC buffer bits from Xen failed: %d\n", + ret); + else + *cap = buf[2]; +} #endif -- cgit v1.2.3 From 50e865a56876bd7a74a79c1778025631150f104a Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Sun, 5 Nov 2023 21:56:31 -0800 Subject: xen/shbuf: eliminate 17 kernel-doc warnings Don't use kernel-doc markers ("/**") for comments that are not in kernel-doc format. This prevents multiple kernel-doc warnings: xen-front-pgdir-shbuf.c:25: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * This structure represents the structure of a shared page xen-front-pgdir-shbuf.c:37: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * Shared buffer ops which are differently implemented xen-front-pgdir-shbuf.c:65: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * Get granted reference to the very first page of the xen-front-pgdir-shbuf.c:85: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * Map granted references of the shared buffer. xen-front-pgdir-shbuf.c:106: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * Unmap granted references of the shared buffer. xen-front-pgdir-shbuf.c:127: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * Free all the resources of the shared buffer. xen-front-pgdir-shbuf.c:154: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * Get the number of pages the page directory consumes itself. xen-front-pgdir-shbuf.c:164: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * Calculate the number of grant references needed to share the buffer xen-front-pgdir-shbuf.c:176: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * Calculate the number of grant references needed to share the buffer xen-front-pgdir-shbuf.c:194: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * Unmap the buffer previously mapped with grant references xen-front-pgdir-shbuf.c:242: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * Map the buffer with grant references provided by the backend. xen-front-pgdir-shbuf.c:324: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * Fill page directory with grant references to the pages of the xen-front-pgdir-shbuf.c:354: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * Fill page directory with grant references to the pages of the xen-front-pgdir-shbuf.c:393: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * Grant references to the frontend's buffer pages. xen-front-pgdir-shbuf.c:422: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * Grant all the references needed to share the buffer. xen-front-pgdir-shbuf.c:470: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * Allocate all required structures to mange shared buffer. xen-front-pgdir-shbuf.c:510: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * Allocate a new instance of a shared buffer. Signed-off-by: Randy Dunlap Reported-by: kernel test robot Closes: lore.kernel.org/r/202311060203.yQrpPZhm-lkp@intel.com Acked-by: Juergen Gross Cc: Juergen Gross Cc: Stefano Stabellini Cc: Oleksandr Tyshchenko Cc: xen-devel@lists.xenproject.org Link: https://lore.kernel.org/r/20231106055631.21520-1-rdunlap@infradead.org Signed-off-by: Juergen Gross --- drivers/xen/xen-front-pgdir-shbuf.c | 34 +++++++++++++++++----------------- 1 file changed, 17 insertions(+), 17 deletions(-) diff --git a/drivers/xen/xen-front-pgdir-shbuf.c b/drivers/xen/xen-front-pgdir-shbuf.c index b52e0fa595a9..223870a0111b 100644 --- a/drivers/xen/xen-front-pgdir-shbuf.c +++ b/drivers/xen/xen-front-pgdir-shbuf.c @@ -21,7 +21,7 @@ #include -/** +/* * This structure represents the structure of a shared page * that contains grant references to the pages of the shared * buffer. This structure is common to many Xen para-virtualized @@ -33,7 +33,7 @@ struct xen_page_directory { grant_ref_t gref[]; /* Variable length */ }; -/** +/* * Shared buffer ops which are differently implemented * depending on the allocation mode, e.g. if the buffer * is allocated by the corresponding backend or frontend. @@ -61,7 +61,7 @@ struct xen_front_pgdir_shbuf_ops { int (*unmap)(struct xen_front_pgdir_shbuf *buf); }; -/** +/* * Get granted reference to the very first page of the * page directory. Usually this is passed to the backend, * so it can find/fill the grant references to the buffer's @@ -81,7 +81,7 @@ xen_front_pgdir_shbuf_get_dir_start(struct xen_front_pgdir_shbuf *buf) } EXPORT_SYMBOL_GPL(xen_front_pgdir_shbuf_get_dir_start); -/** +/* * Map granted references of the shared buffer. * * Depending on the shared buffer mode of allocation @@ -102,7 +102,7 @@ int xen_front_pgdir_shbuf_map(struct xen_front_pgdir_shbuf *buf) } EXPORT_SYMBOL_GPL(xen_front_pgdir_shbuf_map); -/** +/* * Unmap granted references of the shared buffer. * * Depending on the shared buffer mode of allocation @@ -123,7 +123,7 @@ int xen_front_pgdir_shbuf_unmap(struct xen_front_pgdir_shbuf *buf) } EXPORT_SYMBOL_GPL(xen_front_pgdir_shbuf_unmap); -/** +/* * Free all the resources of the shared buffer. * * \param buf shared buffer which resources to be freed. @@ -150,7 +150,7 @@ EXPORT_SYMBOL_GPL(xen_front_pgdir_shbuf_free); offsetof(struct xen_page_directory, \ gref)) / sizeof(grant_ref_t)) -/** +/* * Get the number of pages the page directory consumes itself. * * \param buf shared buffer. @@ -160,7 +160,7 @@ static int get_num_pages_dir(struct xen_front_pgdir_shbuf *buf) return DIV_ROUND_UP(buf->num_pages, XEN_NUM_GREFS_PER_PAGE); } -/** +/* * Calculate the number of grant references needed to share the buffer * and its pages when backend allocates the buffer. * @@ -172,7 +172,7 @@ static void backend_calc_num_grefs(struct xen_front_pgdir_shbuf *buf) buf->num_grefs = get_num_pages_dir(buf); } -/** +/* * Calculate the number of grant references needed to share the buffer * and its pages when frontend allocates the buffer. * @@ -190,7 +190,7 @@ static void guest_calc_num_grefs(struct xen_front_pgdir_shbuf *buf) #define xen_page_to_vaddr(page) \ ((uintptr_t)pfn_to_kaddr(page_to_xen_pfn(page))) -/** +/* * Unmap the buffer previously mapped with grant references * provided by the backend. * @@ -238,7 +238,7 @@ static int backend_unmap(struct xen_front_pgdir_shbuf *buf) return ret; } -/** +/* * Map the buffer with grant references provided by the backend. * * \param buf shared buffer. @@ -320,7 +320,7 @@ static int backend_map(struct xen_front_pgdir_shbuf *buf) return ret; } -/** +/* * Fill page directory with grant references to the pages of the * page directory itself. * @@ -350,7 +350,7 @@ static void backend_fill_page_dir(struct xen_front_pgdir_shbuf *buf) page_dir->gref_dir_next_page = XEN_GREF_LIST_END; } -/** +/* * Fill page directory with grant references to the pages of the * page directory and the buffer we share with the backend. * @@ -389,7 +389,7 @@ static void guest_fill_page_dir(struct xen_front_pgdir_shbuf *buf) } } -/** +/* * Grant references to the frontend's buffer pages. * * These will be shared with the backend, so it can @@ -418,7 +418,7 @@ static int guest_grant_refs_for_buffer(struct xen_front_pgdir_shbuf *buf, return 0; } -/** +/* * Grant all the references needed to share the buffer. * * Grant references to the page directory pages and, if @@ -466,7 +466,7 @@ static int grant_references(struct xen_front_pgdir_shbuf *buf) return 0; } -/** +/* * Allocate all required structures to mange shared buffer. * * \param buf shared buffer. @@ -506,7 +506,7 @@ static const struct xen_front_pgdir_shbuf_ops local_ops = { .grant_refs_for_buffer = guest_grant_refs_for_buffer, }; -/** +/* * Allocate a new instance of a shared buffer. * * \param cfg configuration to be used while allocating a new shared buffer. -- cgit v1.2.3 From 0550d4604e2ca4e653dc13f0c009fc42106b6bfc Mon Sep 17 00:00:00 2001 From: Shigeru Yoshida Date: Wed, 8 Nov 2023 23:31:13 +0900 Subject: RDMA/core: Fix uninit-value access in ib_get_eth_speed() KMSAN reported the following uninit-value access issue: lo speed is unknown, defaulting to 1000 ===================================================== BUG: KMSAN: uninit-value in ib_get_width_and_speed drivers/infiniband/core/verbs.c:1889 [inline] BUG: KMSAN: uninit-value in ib_get_eth_speed+0x546/0xaf0 drivers/infiniband/core/verbs.c:1998 ib_get_width_and_speed drivers/infiniband/core/verbs.c:1889 [inline] ib_get_eth_speed+0x546/0xaf0 drivers/infiniband/core/verbs.c:1998 siw_query_port drivers/infiniband/sw/siw/siw_verbs.c:173 [inline] siw_get_port_immutable+0x6f/0x120 drivers/infiniband/sw/siw/siw_verbs.c:203 setup_port_data drivers/infiniband/core/device.c:848 [inline] setup_device drivers/infiniband/core/device.c:1244 [inline] ib_register_device+0x1589/0x1df0 drivers/infiniband/core/device.c:1383 siw_device_register drivers/infiniband/sw/siw/siw_main.c:72 [inline] siw_newlink+0x129e/0x13d0 drivers/infiniband/sw/siw/siw_main.c:490 nldev_newlink+0x8fd/0xa60 drivers/infiniband/core/nldev.c:1763 rdma_nl_rcv_skb drivers/infiniband/core/netlink.c:239 [inline] rdma_nl_rcv+0xe8a/0x1120 drivers/infiniband/core/netlink.c:259 netlink_unicast_kernel net/netlink/af_netlink.c:1342 [inline] netlink_unicast+0xf4b/0x1230 net/netlink/af_netlink.c:1368 netlink_sendmsg+0x1242/0x1420 net/netlink/af_netlink.c:1910 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg net/socket.c:745 [inline] ____sys_sendmsg+0x997/0xd60 net/socket.c:2588 ___sys_sendmsg+0x271/0x3b0 net/socket.c:2642 __sys_sendmsg net/socket.c:2671 [inline] __do_sys_sendmsg net/socket.c:2680 [inline] __se_sys_sendmsg net/socket.c:2678 [inline] __x64_sys_sendmsg+0x2fa/0x4a0 net/socket.c:2678 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x44/0x110 arch/x86/entry/common.c:82 entry_SYSCALL_64_after_hwframe+0x63/0x6b Local variable lksettings created at: ib_get_eth_speed+0x4b/0xaf0 drivers/infiniband/core/verbs.c:1974 siw_query_port drivers/infiniband/sw/siw/siw_verbs.c:173 [inline] siw_get_port_immutable+0x6f/0x120 drivers/infiniband/sw/siw/siw_verbs.c:203 CPU: 0 PID: 11257 Comm: syz-executor.1 Not tainted 6.6.0-14500-g1c41041124bd #10 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-1.fc38 04/01/2014 ===================================================== If __ethtool_get_link_ksettings() fails, `netdev_speed` is set to the default value, SPEED_1000. In this case, if `lanes` field of struct ethtool_link_ksettings is not initialized, an uninitialized value is passed to ib_get_width_and_speed(). This causes the above issue. This patch resolves the issue by initializing `lanes` to 0. Fixes: cb06b6b3f6cb ("RDMA/core: Get IB width and speed from netdev") Signed-off-by: Shigeru Yoshida Link: https://lore.kernel.org/r/20231108143113.1360567-1-syoshida@redhat.com Signed-off-by: Leon Romanovsky --- drivers/infiniband/core/verbs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/infiniband/core/verbs.c b/drivers/infiniband/core/verbs.c index 8a6da87f464b..94a7f3b0c71c 100644 --- a/drivers/infiniband/core/verbs.c +++ b/drivers/infiniband/core/verbs.c @@ -1971,7 +1971,7 @@ int ib_get_eth_speed(struct ib_device *dev, u32 port_num, u16 *speed, u8 *width) int rc; u32 netdev_speed; struct net_device *netdev; - struct ethtool_link_ksettings lksettings; + struct ethtool_link_ksettings lksettings = {}; if (rdma_port_get_link_layer(dev, port_num) != IB_LINK_LAYER_ETHERNET) return -EINVAL; -- cgit v1.2.3 From efb9cbf66440482ceaa90493d648226ab7ec2ebf Mon Sep 17 00:00:00 2001 From: Junxian Huang Date: Sat, 28 Oct 2023 17:32:42 +0800 Subject: RDMA/hns: Fix unnecessary err return when using invalid congest control algorithm Add a default congest control algorithm so that driver won't return an error when the configured algorithm is invalid. Fixes: f91696f2f053 ("RDMA/hns: Support congestion control type selection according to the FW") Signed-off-by: Junxian Huang Link: https://lore.kernel.org/r/20231028093242.670325-1-huangjunxian6@hisilicon.com Signed-off-by: Leon Romanovsky --- drivers/infiniband/hw/hns/hns_roce_hw_v2.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) diff --git a/drivers/infiniband/hw/hns/hns_roce_hw_v2.c b/drivers/infiniband/hw/hns/hns_roce_hw_v2.c index 0cd2612a4987..2bca9560f32d 100644 --- a/drivers/infiniband/hw/hns/hns_roce_hw_v2.c +++ b/drivers/infiniband/hw/hns/hns_roce_hw_v2.c @@ -4760,10 +4760,15 @@ static int check_cong_type(struct ib_qp *ibqp, cong_alg->wnd_mode_sel = WND_LIMIT; break; default: - ibdev_err(&hr_dev->ib_dev, - "error type(%u) for congestion selection.\n", - hr_dev->caps.cong_type); - return -EINVAL; + ibdev_warn(&hr_dev->ib_dev, + "invalid type(%u) for congestion selection.\n", + hr_dev->caps.cong_type); + hr_dev->caps.cong_type = CONG_TYPE_DCQCN; + cong_alg->alg_sel = CONG_DCQCN; + cong_alg->alg_sub_sel = UNSUPPORT_CONG_LEVEL; + cong_alg->dip_vld = DIP_INVALID; + cong_alg->wnd_mode_sel = WND_LIMIT; + break; } return 0; -- cgit v1.2.3 From 472a2ff63efb30234cbf6b2cdaf8117f21b4f8bc Mon Sep 17 00:00:00 2001 From: Jian Shen Date: Fri, 10 Nov 2023 17:37:07 +0800 Subject: net: hns3: fix add VLAN fail issue MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The hclge_sync_vlan_filter is called in periodic task, trying to remove VLAN from vlan_del_fail_bmap. It can be concurrence with VLAN adding operation from user. So once user failed to delete a VLAN id, and add it again soon, it may be removed by the periodic task, which may cause the software configuration being inconsistent with hardware. So add mutex handling to avoid this. user hns3 driver periodic task │ add vlan 10 ───── hns3_vlan_rx_add_vid │ │ (suppose success) │ │ │ del vlan 10 ───── hns3_vlan_rx_kill_vid │ │ (suppose fail,add to │ │ vlan_del_fail_bmap) │ │ │ add vlan 10 ───── hns3_vlan_rx_add_vid │ (suppose success) │ foreach vlan_del_fail_bmp del vlan 10 Fixes: fe4144d47eef ("net: hns3: sync VLAN filter entries when kill VLAN ID failed") Signed-off-by: Jian Shen Signed-off-by: Jijie Shao Signed-off-by: David S. Miller --- .../ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 28 +++++++++++++++------- .../ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c | 11 +++++++-- 2 files changed, 29 insertions(+), 10 deletions(-) diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c index 66e5807903a0..e22279e5d43f 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c @@ -10025,8 +10025,6 @@ static void hclge_rm_vport_vlan_table(struct hclge_vport *vport, u16 vlan_id, struct hclge_vport_vlan_cfg *vlan, *tmp; struct hclge_dev *hdev = vport->back; - mutex_lock(&hdev->vport_lock); - list_for_each_entry_safe(vlan, tmp, &vport->vlan_list, node) { if (vlan->vlan_id == vlan_id) { if (is_write_tbl && vlan->hd_tbl_status) @@ -10041,8 +10039,6 @@ static void hclge_rm_vport_vlan_table(struct hclge_vport *vport, u16 vlan_id, break; } } - - mutex_unlock(&hdev->vport_lock); } void hclge_rm_vport_all_vlan_table(struct hclge_vport *vport, bool is_del_list) @@ -10451,11 +10447,16 @@ int hclge_set_vlan_filter(struct hnae3_handle *handle, __be16 proto, * handle mailbox. Just record the vlan id, and remove it after * reset finished. */ + mutex_lock(&hdev->vport_lock); if ((test_bit(HCLGE_STATE_RST_HANDLING, &hdev->state) || test_bit(HCLGE_STATE_RST_FAIL, &hdev->state)) && is_kill) { set_bit(vlan_id, vport->vlan_del_fail_bmap); + mutex_unlock(&hdev->vport_lock); return -EBUSY; + } else if (!is_kill && test_bit(vlan_id, vport->vlan_del_fail_bmap)) { + clear_bit(vlan_id, vport->vlan_del_fail_bmap); } + mutex_unlock(&hdev->vport_lock); /* when port base vlan enabled, we use port base vlan as the vlan * filter entry. In this case, we don't update vlan filter table @@ -10470,17 +10471,22 @@ int hclge_set_vlan_filter(struct hnae3_handle *handle, __be16 proto, } if (!ret) { - if (!is_kill) + if (!is_kill) { hclge_add_vport_vlan_table(vport, vlan_id, writen_to_tbl); - else if (is_kill && vlan_id != 0) + } else if (is_kill && vlan_id != 0) { + mutex_lock(&hdev->vport_lock); hclge_rm_vport_vlan_table(vport, vlan_id, false); + mutex_unlock(&hdev->vport_lock); + } } else if (is_kill) { /* when remove hw vlan filter failed, record the vlan id, * and try to remove it from hw later, to be consistence * with stack */ + mutex_lock(&hdev->vport_lock); set_bit(vlan_id, vport->vlan_del_fail_bmap); + mutex_unlock(&hdev->vport_lock); } hclge_set_vport_vlan_fltr_change(vport); @@ -10520,6 +10526,7 @@ static void hclge_sync_vlan_filter(struct hclge_dev *hdev) int i, ret, sync_cnt = 0; u16 vlan_id; + mutex_lock(&hdev->vport_lock); /* start from vport 1 for PF is always alive */ for (i = 0; i < hdev->num_alloc_vport; i++) { struct hclge_vport *vport = &hdev->vport[i]; @@ -10530,21 +10537,26 @@ static void hclge_sync_vlan_filter(struct hclge_dev *hdev) ret = hclge_set_vlan_filter_hw(hdev, htons(ETH_P_8021Q), vport->vport_id, vlan_id, true); - if (ret && ret != -EINVAL) + if (ret && ret != -EINVAL) { + mutex_unlock(&hdev->vport_lock); return; + } clear_bit(vlan_id, vport->vlan_del_fail_bmap); hclge_rm_vport_vlan_table(vport, vlan_id, false); hclge_set_vport_vlan_fltr_change(vport); sync_cnt++; - if (sync_cnt >= HCLGE_MAX_SYNC_COUNT) + if (sync_cnt >= HCLGE_MAX_SYNC_COUNT) { + mutex_unlock(&hdev->vport_lock); return; + } vlan_id = find_first_bit(vport->vlan_del_fail_bmap, VLAN_N_VID); } } + mutex_unlock(&hdev->vport_lock); hclge_sync_vlan_fltr_state(hdev); } diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c index a4d68fb216fb..1c62e58ff6d8 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c @@ -1206,6 +1206,8 @@ static int hclgevf_set_vlan_filter(struct hnae3_handle *handle, test_bit(HCLGEVF_STATE_RST_FAIL, &hdev->state)) && is_kill) { set_bit(vlan_id, hdev->vlan_del_fail_bmap); return -EBUSY; + } else if (!is_kill && test_bit(vlan_id, hdev->vlan_del_fail_bmap)) { + clear_bit(vlan_id, hdev->vlan_del_fail_bmap); } hclgevf_build_send_msg(&send_msg, HCLGE_MBX_SET_VLAN, @@ -1233,20 +1235,25 @@ static void hclgevf_sync_vlan_filter(struct hclgevf_dev *hdev) int ret, sync_cnt = 0; u16 vlan_id; + if (bitmap_empty(hdev->vlan_del_fail_bmap, VLAN_N_VID)) + return; + + rtnl_lock(); vlan_id = find_first_bit(hdev->vlan_del_fail_bmap, VLAN_N_VID); while (vlan_id != VLAN_N_VID) { ret = hclgevf_set_vlan_filter(handle, htons(ETH_P_8021Q), vlan_id, true); if (ret) - return; + break; clear_bit(vlan_id, hdev->vlan_del_fail_bmap); sync_cnt++; if (sync_cnt >= HCLGEVF_MAX_SYNC_COUNT) - return; + break; vlan_id = find_first_bit(hdev->vlan_del_fail_bmap, VLAN_N_VID); } + rtnl_unlock(); } static int hclgevf_en_hw_strip_rxvtag(struct hnae3_handle *handle, bool enable) -- cgit v1.2.3 From ac92c0a9a0603fb448e60f38e63302e4eebb8035 Mon Sep 17 00:00:00 2001 From: Yonglong Liu Date: Fri, 10 Nov 2023 17:37:08 +0800 Subject: net: hns3: add barrier in vf mailbox reply process In hclgevf_mbx_handler() and hclgevf_get_mbx_resp() functions, there is a typical store-store and load-load scenario between received_resp and additional_info. This patch adds barrier to fix the problem. Fixes: 4671042f1ef0 ("net: hns3: add match_id to check mailbox response from PF to VF") Signed-off-by: Yonglong Liu Signed-off-by: Jijie Shao Signed-off-by: David S. Miller --- drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_mbx.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_mbx.c b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_mbx.c index bbf7b14079de..85c2a634c8f9 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_mbx.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_mbx.c @@ -63,6 +63,9 @@ static int hclgevf_get_mbx_resp(struct hclgevf_dev *hdev, u16 code0, u16 code1, i++; } + /* ensure additional_info will be seen after received_resp */ + smp_rmb(); + if (i >= HCLGEVF_MAX_TRY_TIMES) { dev_err(&hdev->pdev->dev, "VF could not get mbx(%u,%u) resp(=%d) from PF in %d tries\n", @@ -178,6 +181,10 @@ static void hclgevf_handle_mbx_response(struct hclgevf_dev *hdev, resp->resp_status = hclgevf_resp_to_errno(resp_status); memcpy(resp->additional_info, req->msg.resp_data, HCLGE_MBX_MAX_RESP_DATA_SIZE * sizeof(u8)); + + /* ensure additional_info will be seen before setting received_resp */ + smp_wmb(); + if (match_id) { /* If match_id is not zero, it means PF support match_id. * if the match_id is right, VF get the right response, or -- cgit v1.2.3 From 75b247b57d8b71bcb679e4cb37d0db104848806c Mon Sep 17 00:00:00 2001 From: Jian Shen Date: Fri, 10 Nov 2023 17:37:09 +0800 Subject: net: hns3: fix incorrect capability bit display for copper port Currently, the FEC capability bit is default set for device version V2. It's incorrect for the copper port. Eventhough it doesn't make the nic work abnormal, but the capability information display in debugfs may confuse user. So clear it when driver get the port type inforamtion. Fixes: 433ccce83504 ("net: hns3: use FEC capability queried from firmware") Signed-off-by: Jian Shen Signed-off-by: Jijie Shao Signed-off-by: David S. Miller --- drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c index e22279e5d43f..c393b4ee4a32 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c @@ -11663,6 +11663,7 @@ static int hclge_init_ae_dev(struct hnae3_ae_dev *ae_dev) goto err_msi_irq_uninit; if (hdev->hw.mac.media_type == HNAE3_MEDIA_TYPE_COPPER) { + clear_bit(HNAE3_DEV_SUPPORT_FEC_B, ae_dev->caps); if (hnae3_dev_phy_imp_supported(hdev)) ret = hclge_update_tp_port_info(hdev); else -- cgit v1.2.3 From 53aba458f23846112c0d44239580ff59bc5c36c3 Mon Sep 17 00:00:00 2001 From: Yonglong Liu Date: Fri, 10 Nov 2023 17:37:10 +0800 Subject: net: hns3: fix out-of-bounds access may occur when coalesce info is read via debugfs The hns3 driver define an array of string to show the coalesce info, but if the kernel adds a new mode or a new state, out-of-bounds access may occur when coalesce info is read via debugfs, this patch fix the problem. Fixes: c99fead7cb07 ("net: hns3: add debugfs support for interrupt coalesce") Signed-off-by: Yonglong Liu Signed-off-by: Jijie Shao Signed-off-by: David S. Miller --- drivers/net/ethernet/hisilicon/hns3/hns3_debugfs.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_debugfs.c b/drivers/net/ethernet/hisilicon/hns3/hns3_debugfs.c index 0b138635bafa..c083d1d10767 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3_debugfs.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3_debugfs.c @@ -503,11 +503,14 @@ static void hns3_get_coal_info(struct hns3_enet_tqp_vector *tqp_vector, } sprintf(result[j++], "%d", i); - sprintf(result[j++], "%s", dim_state_str[dim->state]); + sprintf(result[j++], "%s", dim->state < ARRAY_SIZE(dim_state_str) ? + dim_state_str[dim->state] : "unknown"); sprintf(result[j++], "%u", dim->profile_ix); - sprintf(result[j++], "%s", dim_cqe_mode_str[dim->mode]); + sprintf(result[j++], "%s", dim->mode < ARRAY_SIZE(dim_cqe_mode_str) ? + dim_cqe_mode_str[dim->mode] : "unknown"); sprintf(result[j++], "%s", - dim_tune_stat_str[dim->tune_state]); + dim->tune_state < ARRAY_SIZE(dim_tune_stat_str) ? + dim_tune_stat_str[dim->tune_state] : "unknown"); sprintf(result[j++], "%u", dim->steps_left); sprintf(result[j++], "%u", dim->steps_right); sprintf(result[j++], "%u", dim->tired); -- cgit v1.2.3 From dbd2f3b20c6ae425665b6975d766e3653d453e73 Mon Sep 17 00:00:00 2001 From: Yonglong Liu Date: Fri, 10 Nov 2023 17:37:11 +0800 Subject: net: hns3: fix variable may not initialized problem in hns3_init_mac_addr() When a VF is calling hns3_init_mac_addr(), get_mac_addr() may return fail, then the value of mac_addr_temp is not initialized. Fixes: 76ad4f0ee747 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC") Signed-off-by: Yonglong Liu Signed-off-by: Jijie Shao Signed-off-by: David S. Miller --- drivers/net/ethernet/hisilicon/hns3/hns3_enet.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c index 06117502001f..b618797a7e8d 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c @@ -5139,7 +5139,7 @@ static int hns3_init_mac_addr(struct net_device *netdev) struct hns3_nic_priv *priv = netdev_priv(netdev); char format_mac_addr[HNAE3_FORMAT_MAC_ADDR_LEN]; struct hnae3_handle *h = priv->ae_handle; - u8 mac_addr_temp[ETH_ALEN]; + u8 mac_addr_temp[ETH_ALEN] = {0}; int ret = 0; if (h->ae_algo->ops->get_mac_addr) -- cgit v1.2.3 From 65e98bb56fa3ce2edb400930c05238c9b380500e Mon Sep 17 00:00:00 2001 From: Jijie Shao Date: Fri, 10 Nov 2023 17:37:12 +0800 Subject: net: hns3: fix VF reset fail issue Currently the reset process in hns3 and firmware watchdog init process is asynchronous. We think firmware watchdog initialization is completed before VF clear the interrupt source. However, firmware initialization may not complete early. So VF will receive multiple reset interrupts and fail to reset. So we add delay before VF interrupt source and 5 ms delay is enough to avoid second reset interrupt. Fixes: 427900d27d86 ("net: hns3: fix the timing issue of VF clearing interrupt sources") Signed-off-by: Jijie Shao Signed-off-by: David S. Miller --- drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c | 14 +++++++++++++- drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.h | 1 + 2 files changed, 14 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c index 1c62e58ff6d8..0aa9beefd1c7 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c @@ -1981,8 +1981,18 @@ static enum hclgevf_evt_cause hclgevf_check_evt_cause(struct hclgevf_dev *hdev, return HCLGEVF_VECTOR0_EVENT_OTHER; } +static void hclgevf_reset_timer(struct timer_list *t) +{ + struct hclgevf_dev *hdev = from_timer(hdev, t, reset_timer); + + hclgevf_clear_event_cause(hdev, HCLGEVF_VECTOR0_EVENT_RST); + hclgevf_reset_task_schedule(hdev); +} + static irqreturn_t hclgevf_misc_irq_handle(int irq, void *data) { +#define HCLGEVF_RESET_DELAY 5 + enum hclgevf_evt_cause event_cause; struct hclgevf_dev *hdev = data; u32 clearval; @@ -1994,7 +2004,8 @@ static irqreturn_t hclgevf_misc_irq_handle(int irq, void *data) switch (event_cause) { case HCLGEVF_VECTOR0_EVENT_RST: - hclgevf_reset_task_schedule(hdev); + mod_timer(&hdev->reset_timer, + jiffies + msecs_to_jiffies(HCLGEVF_RESET_DELAY)); break; case HCLGEVF_VECTOR0_EVENT_MBX: hclgevf_mbx_handler(hdev); @@ -2937,6 +2948,7 @@ static int hclgevf_init_hdev(struct hclgevf_dev *hdev) HCLGEVF_DRIVER_NAME); hclgevf_task_schedule(hdev, round_jiffies_relative(HZ)); + timer_setup(&hdev->reset_timer, hclgevf_reset_timer, 0); return 0; diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.h b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.h index 81c16b8c8da2..a73f2bf3a56a 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.h +++ b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.h @@ -219,6 +219,7 @@ struct hclgevf_dev { enum hnae3_reset_type reset_level; unsigned long reset_pending; enum hnae3_reset_type reset_type; + struct timer_list reset_timer; #define HCLGEVF_RESET_REQUESTED 0 #define HCLGEVF_RESET_PENDING 1 -- cgit v1.2.3 From dff655e82faffc287d4a72a59f66fa120bf904e4 Mon Sep 17 00:00:00 2001 From: Jijie Shao Date: Fri, 10 Nov 2023 17:37:13 +0800 Subject: net: hns3: fix VF wrong speed and duplex issue If PF is down, firmware will returns 10 Mbit/s rate and half-duplex mode when PF queries the port information from firmware. After imp reset command is executed, PF status changes to down, and PF will query link status and updates port information from firmware in a periodic scheduled task. However, there is a low probability that port information is updated when PF is down, and then PF link status changes to up. In this case, PF synchronizes incorrect rate and duplex mode to VF. This patch fixes it by updating port information before PF synchronizes the rate and duplex to the VF when PF changes to up. Fixes: 18b6e31f8bf4 ("net: hns3: PF add support for pushing link status to VFs") Signed-off-by: Jijie Shao Signed-off-by: David S. Miller --- drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c index c393b4ee4a32..5ea9e59569ef 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c @@ -61,6 +61,7 @@ static void hclge_sync_fd_table(struct hclge_dev *hdev); static void hclge_update_fec_stats(struct hclge_dev *hdev); static int hclge_mac_link_status_wait(struct hclge_dev *hdev, int link_ret, int wait_cnt); +static int hclge_update_port_info(struct hclge_dev *hdev); static struct hnae3_ae_algo ae_algo; @@ -3041,6 +3042,9 @@ static void hclge_update_link_status(struct hclge_dev *hdev) if (state != hdev->hw.mac.link) { hdev->hw.mac.link = state; + if (state == HCLGE_LINK_STATUS_UP) + hclge_update_port_info(hdev); + client->ops->link_status_change(handle, state); hclge_config_mac_tnl_int(hdev, state); if (rclient && rclient->ops->link_status_change) -- cgit v1.2.3 From 348ddab81f7b0983d9fb158df910254f08d3f887 Mon Sep 17 00:00:00 2001 From: Uwe Kleine-König Date: Fri, 29 Sep 2023 10:16:37 +0200 Subject: coresight: etm4x: Remove bogous __exit annotation for some functions MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit etm4_platform_driver (which lives in ".data" contains a reference to etm4_remove_platform_dev(). So the latter must not be marked with __exit which results in the function being discarded for a build with CONFIG_CORESIGHT_SOURCE_ETM4X=y which in turn makes the remove pointer contain invalid data. etm4x_amba_driver referencing etm4_remove_amba() has the same issue. Drop the __exit annotations for the two affected functions and a third one that is called by the other two. For reasons I don't understand this isn't catched by building with CONFIG_DEBUG_SECTION_MISMATCH=y. Fixes: c23bc382ef0e ("coresight: etm4x: Refactor probing routine") Fixes: 5214b563588e ("coresight: etm4x: Add support for sysreg only devices") Signed-off-by: Uwe Kleine-König Reviewed-by: James Clark Link: https://lore.kernel.org/all/20230929081540.yija47lsj35xtj4v@pengutronix.de/ Link: https://lore.kernel.org/r/20230929081637.2377335-1-u.kleine-koenig@pengutronix.de Signed-off-by: Suzuki K Poulose --- drivers/hwtracing/coresight/coresight-etm4x-core.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/hwtracing/coresight/coresight-etm4x-core.c b/drivers/hwtracing/coresight/coresight-etm4x-core.c index 77b0271ce6eb..34aee59dd147 100644 --- a/drivers/hwtracing/coresight/coresight-etm4x-core.c +++ b/drivers/hwtracing/coresight/coresight-etm4x-core.c @@ -2224,7 +2224,7 @@ static void clear_etmdrvdata(void *info) per_cpu(delayed_probe, cpu) = NULL; } -static void __exit etm4_remove_dev(struct etmv4_drvdata *drvdata) +static void etm4_remove_dev(struct etmv4_drvdata *drvdata) { bool had_delayed_probe; /* @@ -2253,7 +2253,7 @@ static void __exit etm4_remove_dev(struct etmv4_drvdata *drvdata) } } -static void __exit etm4_remove_amba(struct amba_device *adev) +static void etm4_remove_amba(struct amba_device *adev) { struct etmv4_drvdata *drvdata = dev_get_drvdata(&adev->dev); @@ -2261,7 +2261,7 @@ static void __exit etm4_remove_amba(struct amba_device *adev) etm4_remove_dev(drvdata); } -static int __exit etm4_remove_platform_dev(struct platform_device *pdev) +static int etm4_remove_platform_dev(struct platform_device *pdev) { struct etmv4_drvdata *drvdata = dev_get_drvdata(&pdev->dev); -- cgit v1.2.3 From 287e82cf69aa264a52bc37591bd0eb407e20f85c Mon Sep 17 00:00:00 2001 From: James Clark Date: Fri, 6 Oct 2023 14:14:52 +0100 Subject: coresight: Fix crash when Perf and sysfs modes are used concurrently Partially revert the change in commit 6148652807ba ("coresight: Enable and disable helper devices adjacent to the path") which changed the bare call from source_ops(csdev)->enable() to coresight_enable_source() for Perf sessions. It was missed that coresight_enable_source() is specifically for the sysfs interface, rather than being a generic call. This interferes with the sysfs reference counting to cause the following crash: $ perf record -e cs_etm/@tmc_etr0/ -C 0 & $ echo 1 > /sys/bus/coresight/devices/tmc_etr0/enable_sink $ echo 1 > /sys/bus/coresight/devices/etm0/enable_source $ echo 0 > /sys/bus/coresight/devices/etm0/enable_source Unable to handle kernel NULL pointer dereference at virtual address 00000000000001d0 Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP ... Call trace: etm4_disable+0x54/0x150 [coresight_etm4x] coresight_disable_source+0x6c/0x98 [coresight] coresight_disable+0x74/0x1c0 [coresight] enable_source_store+0x88/0xa0 [coresight] dev_attr_store+0x20/0x40 sysfs_kf_write+0x4c/0x68 kernfs_fop_write_iter+0x120/0x1b8 vfs_write+0x2dc/0x3b0 ksys_write+0x70/0x108 __arm64_sys_write+0x24/0x38 invoke_syscall+0x50/0x128 el0_svc_common.constprop.0+0x104/0x130 do_el0_svc+0x40/0xb8 el0_svc+0x2c/0xb8 el0t_64_sync_handler+0xc0/0xc8 el0t_64_sync+0x1a4/0x1a8 Code: d53cd042 91002000 b9402a81 b8626800 (f940ead5) ---[ end trace 0000000000000000 ]--- This commit linked below also fixes the issue, but has unlocked updates to the mode which could potentially race. So until we come up with a more complete solution that takes all locking and interaction between both modes into account, just revert back to the old behavior for Perf. Reported-by: Junhao He Closes: https://lore.kernel.org/linux-arm-kernel/20230921132904.60996-1-hejunhao3@huawei.com/ Fixes: 6148652807ba ("coresight: Enable and disable helper devices adjacent to the path") Tested-by: Junhao He Signed-off-by: James Clark Signed-off-by: Suzuki K Poulose Link: https://lore.kernel.org/r/20231006131452.646721-1-james.clark@arm.com --- drivers/hwtracing/coresight/coresight-etm-perf.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/hwtracing/coresight/coresight-etm-perf.c b/drivers/hwtracing/coresight/coresight-etm-perf.c index 5ca6278baff4..89e8ed214ea4 100644 --- a/drivers/hwtracing/coresight/coresight-etm-perf.c +++ b/drivers/hwtracing/coresight/coresight-etm-perf.c @@ -493,7 +493,7 @@ static void etm_event_start(struct perf_event *event, int flags) goto fail_end_stop; /* Finally enable the tracer */ - if (coresight_enable_source(csdev, CS_MODE_PERF, event)) + if (source_ops(csdev)->enable(csdev, event, CS_MODE_PERF)) goto fail_disable_path; /* @@ -587,7 +587,7 @@ static void etm_event_stop(struct perf_event *event, int mode) return; /* stop tracer */ - coresight_disable_source(csdev, event); + source_ops(csdev)->disable(csdev, event); /* tell the core */ event->hw.state = PERF_HES_STOPPED; -- cgit v1.2.3 From 55e0a2fb0cb5ab7c9c99c1ad4d3e6954de8b73a0 Mon Sep 17 00:00:00 2001 From: Junhao He Date: Tue, 10 Oct 2023 16:47:31 +0800 Subject: hwtracing: hisi_ptt: Add dummy callback pmu::read() When start trace with perf option "-C $cpu" and immediately stop it with SIGTERM or others, the perf core will invoke pmu::read() while the driver doesn't implement it. Add a dummy pmu::read() to avoid any issues. Fixes: ff0de066b463 ("hwtracing: hisi_ptt: Add trace function support for HiSilicon PCIe Tune and Trace device") Signed-off-by: Junhao He Signed-off-by: Yicong Yang Acked-by: Jonathan Cameron Signed-off-by: Suzuki K Poulose Link: https://lore.kernel.org/r/20231010084731.30450-6-yangyicong@huawei.com --- drivers/hwtracing/ptt/hisi_ptt.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/hwtracing/ptt/hisi_ptt.c b/drivers/hwtracing/ptt/hisi_ptt.c index 49ea1b0f7489..3045d1894b81 100644 --- a/drivers/hwtracing/ptt/hisi_ptt.c +++ b/drivers/hwtracing/ptt/hisi_ptt.c @@ -1178,6 +1178,10 @@ static void hisi_ptt_pmu_del(struct perf_event *event, int flags) hisi_ptt_pmu_stop(event, PERF_EF_UPDATE); } +static void hisi_ptt_pmu_read(struct perf_event *event) +{ +} + static void hisi_ptt_remove_cpuhp_instance(void *hotplug_node) { cpuhp_state_remove_instance_nocalls(hisi_ptt_pmu_online, hotplug_node); @@ -1221,6 +1225,7 @@ static int hisi_ptt_register_pmu(struct hisi_ptt *hisi_ptt) .stop = hisi_ptt_pmu_stop, .add = hisi_ptt_pmu_add, .del = hisi_ptt_pmu_del, + .read = hisi_ptt_pmu_read, }; reg = readl(hisi_ptt->iobase + HISI_PTT_LOCATION); -- cgit v1.2.3 From e0dd27ad8af00f147ac3c9de88e0687986afc3ea Mon Sep 17 00:00:00 2001 From: Yicong Yang Date: Tue, 10 Oct 2023 16:47:28 +0800 Subject: hwtracing: hisi_ptt: Handle the interrupt in hardirq context Handle the trace interrupt in the hardirq context, make sure the irq core won't threaded it by declaring IRQF_NO_THREAD and userspace won't balance it by declaring IRQF_NOBALANCING. Otherwise we may violate the synchronization requirements of the perf core, referenced to the change of arm-ccn PMU commit 0811ef7e2f54 ("bus: arm-ccn: fix PMU interrupt flags"). In the interrupt handler we mainly doing 2 things: - Copy the data from the local DMA buffer to the AUX buffer - Commit the data in the AUX buffer Signed-off-by: Yicong Yang Acked-by: Jonathan Cameron [ Fixed commit description to suppress checkpatch warning ] Signed-off-by: Suzuki K Poulose Link: https://lore.kernel.org/r/20231010084731.30450-3-yangyicong@huawei.com --- drivers/hwtracing/ptt/hisi_ptt.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/hwtracing/ptt/hisi_ptt.c b/drivers/hwtracing/ptt/hisi_ptt.c index 3045d1894b81..dbed4fd4e296 100644 --- a/drivers/hwtracing/ptt/hisi_ptt.c +++ b/drivers/hwtracing/ptt/hisi_ptt.c @@ -342,9 +342,9 @@ static int hisi_ptt_register_irq(struct hisi_ptt *hisi_ptt) return ret; hisi_ptt->trace_irq = pci_irq_vector(pdev, HISI_PTT_TRACE_DMA_IRQ); - ret = devm_request_threaded_irq(&pdev->dev, hisi_ptt->trace_irq, - NULL, hisi_ptt_isr, 0, - DRV_NAME, hisi_ptt); + ret = devm_request_irq(&pdev->dev, hisi_ptt->trace_irq, hisi_ptt_isr, + IRQF_NOBALANCING | IRQF_NO_THREAD, DRV_NAME, + hisi_ptt); if (ret) { pci_err(pdev, "failed to request irq %d, ret = %d\n", hisi_ptt->trace_irq, ret); -- cgit v1.2.3 From aff787f64ad7cbb54614b51b82c682fe06411ef3 Mon Sep 17 00:00:00 2001 From: Yicong Yang Date: Tue, 10 Oct 2023 16:47:30 +0800 Subject: hwtracing: hisi_ptt: Don't try to attach a task PTT is an uncore PMU and shouldn't be attached to any task. Block the usage in pmu::event_init(). Signed-off-by: Yicong Yang Acked-by: Jonathan Cameron Signed-off-by: Suzuki K Poulose Link: https://lore.kernel.org/r/20231010084731.30450-5-yangyicong@huawei.com --- drivers/hwtracing/ptt/hisi_ptt.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/hwtracing/ptt/hisi_ptt.c b/drivers/hwtracing/ptt/hisi_ptt.c index dbed4fd4e296..a991ecb7515a 100644 --- a/drivers/hwtracing/ptt/hisi_ptt.c +++ b/drivers/hwtracing/ptt/hisi_ptt.c @@ -1000,6 +1000,9 @@ static int hisi_ptt_pmu_event_init(struct perf_event *event) return -EOPNOTSUPP; } + if (event->attach_state & PERF_ATTACH_TASK) + return -EOPNOTSUPP; + if (event->attr.type != hisi_ptt->hisi_ptt_pmu.type) return -ENOENT; -- cgit v1.2.3 From f726eaa787e9f9bc858c902d18a09af6bcbfcdaf Mon Sep 17 00:00:00 2001 From: Jan Bottorff Date: Thu, 9 Nov 2023 03:19:27 +0000 Subject: i2c: designware: Fix corrupted memory seen in the ISR When running on a many core ARM64 server, errors were happening in the ISR that looked like corrupted memory. These corruptions would fix themselves if small delays were inserted in the ISR. Errors reported by the driver included "i2c_designware APMC0D0F:00: i2c_dw_xfer_msg: invalid target address" and "i2c_designware APMC0D0F:00:controller timed out" during in-band IPMI SSIF stress tests. The problem was determined to be memory writes in the driver were not becoming visible to all cores when execution rapidly shifted between cores, like when a register write immediately triggers an ISR. Processors with weak memory ordering, like ARM64, make no guarantees about the order normal memory writes become globally visible, unless barrier instructions are used to control ordering. To solve this, regmap accessor functions configured by this driver were changed to use non-relaxed forms of the low-level register access functions, which include a barrier on platforms that require it. This assures memory writes before a controller register access are visible to all cores. The community concluded defaulting to correct operation outweighed defaulting to the small performance gains from using relaxed access functions. Being a low speed device added weight to this choice of default register access behavior. Signed-off-by: Jan Bottorff Acked-by: Jarkko Nikula Tested-by: Serge Semin Reviewed-by: Serge Semin Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-designware-common.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/drivers/i2c/busses/i2c-designware-common.c b/drivers/i2c/busses/i2c-designware-common.c index affcfb243f0f..35f762872b8a 100644 --- a/drivers/i2c/busses/i2c-designware-common.c +++ b/drivers/i2c/busses/i2c-designware-common.c @@ -63,7 +63,7 @@ static int dw_reg_read(void *context, unsigned int reg, unsigned int *val) { struct dw_i2c_dev *dev = context; - *val = readl_relaxed(dev->base + reg); + *val = readl(dev->base + reg); return 0; } @@ -72,7 +72,7 @@ static int dw_reg_write(void *context, unsigned int reg, unsigned int val) { struct dw_i2c_dev *dev = context; - writel_relaxed(val, dev->base + reg); + writel(val, dev->base + reg); return 0; } @@ -81,7 +81,7 @@ static int dw_reg_read_swab(void *context, unsigned int reg, unsigned int *val) { struct dw_i2c_dev *dev = context; - *val = swab32(readl_relaxed(dev->base + reg)); + *val = swab32(readl(dev->base + reg)); return 0; } @@ -90,7 +90,7 @@ static int dw_reg_write_swab(void *context, unsigned int reg, unsigned int val) { struct dw_i2c_dev *dev = context; - writel_relaxed(swab32(val), dev->base + reg); + writel(swab32(val), dev->base + reg); return 0; } @@ -99,8 +99,8 @@ static int dw_reg_read_word(void *context, unsigned int reg, unsigned int *val) { struct dw_i2c_dev *dev = context; - *val = readw_relaxed(dev->base + reg) | - (readw_relaxed(dev->base + reg + 2) << 16); + *val = readw(dev->base + reg) | + (readw(dev->base + reg + 2) << 16); return 0; } @@ -109,8 +109,8 @@ static int dw_reg_write_word(void *context, unsigned int reg, unsigned int val) { struct dw_i2c_dev *dev = context; - writew_relaxed(val, dev->base + reg); - writew_relaxed(val >> 16, dev->base + reg + 2); + writew(val, dev->base + reg); + writew(val >> 16, dev->base + reg + 2); return 0; } -- cgit v1.2.3 From 6979a51ecaec4dfb7c768eb2a77b77df73a74c8e Mon Sep 17 00:00:00 2001 From: MD Danish Anwar Date: Mon, 13 Nov 2023 15:16:56 +0530 Subject: MAINTAINERS: add entry for TI ICSSG Ethernet driver Add record for TI Industrial Communication Subsystem - Gigabit (ICSSG) Ethernet driver. Also add Roger and myself as maintainer. Signed-off-by: MD Danish Anwar Signed-off-by: David S. Miller --- MAINTAINERS | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index e3acb36989f0..0443f4d9f736 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -21795,6 +21795,15 @@ F: Documentation/devicetree/bindings/media/i2c/ti,ds90* F: drivers/media/i2c/ds90* F: include/media/i2c/ds90* +TI ICSSG ETHERNET DRIVER (ICSSG) +R: MD Danish Anwar +R: Roger Quadros +L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) +L: netdev@vger.kernel.org +S: Maintained +F: Documentation/devicetree/bindings/net/ti,icss*.yaml +F: drivers/net/ethernet/ti/icssg/* + TI J721E CSI2RX DRIVER M: Jai Luthra L: linux-media@vger.kernel.org -- cgit v1.2.3 From 438cbcdf105d84449fceb39a2d0e16d0ec20708f Mon Sep 17 00:00:00 2001 From: Marek Behún Date: Fri, 10 Nov 2023 13:05:46 +0100 Subject: net: mdio: fix typo in header MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The quotes symbol in "EEE "link partner ability 1 should be at the end of the register name "EEE link partner ability 1" Signed-off-by: Marek Behún Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller --- include/linux/mdio.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/linux/mdio.h b/include/linux/mdio.h index 8fa23bdcedbf..007fd9c3e4b6 100644 --- a/include/linux/mdio.h +++ b/include/linux/mdio.h @@ -420,7 +420,7 @@ static inline u32 linkmode_adv_to_mii_t1_adv_m_t(unsigned long *advertising) * A function that translates value of following registers to the linkmode: * IEEE 802.3-2018 45.2.3.10 "EEE control and capability 1" register (3.20) * IEEE 802.3-2018 45.2.7.13 "EEE advertisement 1" register (7.60) - * IEEE 802.3-2018 45.2.7.14 "EEE "link partner ability 1 register (7.61) + * IEEE 802.3-2018 45.2.7.14 "EEE link partner ability 1" register (7.61) */ static inline void mii_eee_cap1_mod_linkmode_t(unsigned long *adv, u32 val) { -- cgit v1.2.3 From e6daf129ccb79d3781129f623f82bc676f2cb02c Mon Sep 17 00:00:00 2001 From: Willem de Bruijn Date: Fri, 10 Nov 2023 10:36:00 -0500 Subject: net: gso_test: support CONFIG_MAX_SKB_FRAGS up to 45 The test allocs a single page to hold all the frag_list skbs. This is insufficient on kernels with CONFIG_MAX_SKB_FRAGS=45, due to the increased skb_shared_info frags[] array length. gso_test_func: ASSERTION FAILED at net/core/gso_test.c:210 Expected alloc_size <= ((1UL) << 12), but alloc_size == 5075 (0x13d3) ((1UL) << 12) == 4096 (0x1000) Simplify the logic. Just allocate a page for each frag_list skb. Fixes: 4688ecb1385f ("net: expand skb_segment unit test with frag_list coverage") Signed-off-by: Willem de Bruijn Reviewed-by: Simon Horman Signed-off-by: David S. Miller --- net/core/gso_test.c | 14 +++++--------- 1 file changed, 5 insertions(+), 9 deletions(-) diff --git a/net/core/gso_test.c b/net/core/gso_test.c index ceb684be4cbf..4c2e77bd12f4 100644 --- a/net/core/gso_test.c +++ b/net/core/gso_test.c @@ -180,18 +180,17 @@ static void gso_test_func(struct kunit *test) } if (tcase->frag_skbs) { - unsigned int total_size = 0, total_true_size = 0, alloc_size = 0; + unsigned int total_size = 0, total_true_size = 0; struct sk_buff *frag_skb, *prev = NULL; - page = alloc_page(GFP_KERNEL); - KUNIT_ASSERT_NOT_NULL(test, page); - page_ref_add(page, tcase->nr_frag_skbs - 1); - for (i = 0; i < tcase->nr_frag_skbs; i++) { unsigned int frag_size; + page = alloc_page(GFP_KERNEL); + KUNIT_ASSERT_NOT_NULL(test, page); + frag_size = tcase->frag_skbs[i]; - frag_skb = build_skb(page_address(page) + alloc_size, + frag_skb = build_skb(page_address(page), frag_size + shinfo_size); KUNIT_ASSERT_NOT_NULL(test, frag_skb); __skb_put(frag_skb, frag_size); @@ -204,11 +203,8 @@ static void gso_test_func(struct kunit *test) total_size += frag_size; total_true_size += frag_skb->truesize; - alloc_size += frag_size + shinfo_size; } - KUNIT_ASSERT_LE(test, alloc_size, PAGE_SIZE); - skb->len += total_size; skb->data_len += total_size; skb->truesize += total_true_size; -- cgit v1.2.3 From fb317eb23b5ee4c37b0656a9a52a3db58d9dd072 Mon Sep 17 00:00:00 2001 From: Shigeru Yoshida Date: Sat, 11 Nov 2023 01:39:47 +0900 Subject: tipc: Fix kernel-infoleak due to uninitialized TLV value KMSAN reported the following kernel-infoleak issue: ===================================================== BUG: KMSAN: kernel-infoleak in instrument_copy_to_user include/linux/instrumented.h:114 [inline] BUG: KMSAN: kernel-infoleak in copy_to_user_iter lib/iov_iter.c:24 [inline] BUG: KMSAN: kernel-infoleak in iterate_ubuf include/linux/iov_iter.h:29 [inline] BUG: KMSAN: kernel-infoleak in iterate_and_advance2 include/linux/iov_iter.h:245 [inline] BUG: KMSAN: kernel-infoleak in iterate_and_advance include/linux/iov_iter.h:271 [inline] BUG: KMSAN: kernel-infoleak in _copy_to_iter+0x4ec/0x2bc0 lib/iov_iter.c:186 instrument_copy_to_user include/linux/instrumented.h:114 [inline] copy_to_user_iter lib/iov_iter.c:24 [inline] iterate_ubuf include/linux/iov_iter.h:29 [inline] iterate_and_advance2 include/linux/iov_iter.h:245 [inline] iterate_and_advance include/linux/iov_iter.h:271 [inline] _copy_to_iter+0x4ec/0x2bc0 lib/iov_iter.c:186 copy_to_iter include/linux/uio.h:197 [inline] simple_copy_to_iter net/core/datagram.c:532 [inline] __skb_datagram_iter.5+0x148/0xe30 net/core/datagram.c:420 skb_copy_datagram_iter+0x52/0x210 net/core/datagram.c:546 skb_copy_datagram_msg include/linux/skbuff.h:3960 [inline] netlink_recvmsg+0x43d/0x1630 net/netlink/af_netlink.c:1967 sock_recvmsg_nosec net/socket.c:1044 [inline] sock_recvmsg net/socket.c:1066 [inline] __sys_recvfrom+0x476/0x860 net/socket.c:2246 __do_sys_recvfrom net/socket.c:2264 [inline] __se_sys_recvfrom net/socket.c:2260 [inline] __x64_sys_recvfrom+0x130/0x200 net/socket.c:2260 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x44/0x110 arch/x86/entry/common.c:82 entry_SYSCALL_64_after_hwframe+0x63/0x6b Uninit was created at: slab_post_alloc_hook+0x103/0x9e0 mm/slab.h:768 slab_alloc_node mm/slub.c:3478 [inline] kmem_cache_alloc_node+0x5f7/0xb50 mm/slub.c:3523 kmalloc_reserve+0x13c/0x4a0 net/core/skbuff.c:560 __alloc_skb+0x2fd/0x770 net/core/skbuff.c:651 alloc_skb include/linux/skbuff.h:1286 [inline] tipc_tlv_alloc net/tipc/netlink_compat.c:156 [inline] tipc_get_err_tlv+0x90/0x5d0 net/tipc/netlink_compat.c:170 tipc_nl_compat_recv+0x1042/0x15d0 net/tipc/netlink_compat.c:1324 genl_family_rcv_msg_doit net/netlink/genetlink.c:972 [inline] genl_family_rcv_msg net/netlink/genetlink.c:1052 [inline] genl_rcv_msg+0x1220/0x12c0 net/netlink/genetlink.c:1067 netlink_rcv_skb+0x4a4/0x6a0 net/netlink/af_netlink.c:2545 genl_rcv+0x41/0x60 net/netlink/genetlink.c:1076 netlink_unicast_kernel net/netlink/af_netlink.c:1342 [inline] netlink_unicast+0xf4b/0x1230 net/netlink/af_netlink.c:1368 netlink_sendmsg+0x1242/0x1420 net/netlink/af_netlink.c:1910 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg net/socket.c:745 [inline] ____sys_sendmsg+0x997/0xd60 net/socket.c:2588 ___sys_sendmsg+0x271/0x3b0 net/socket.c:2642 __sys_sendmsg net/socket.c:2671 [inline] __do_sys_sendmsg net/socket.c:2680 [inline] __se_sys_sendmsg net/socket.c:2678 [inline] __x64_sys_sendmsg+0x2fa/0x4a0 net/socket.c:2678 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x44/0x110 arch/x86/entry/common.c:82 entry_SYSCALL_64_after_hwframe+0x63/0x6b Bytes 34-35 of 36 are uninitialized Memory access of size 36 starts at ffff88802d464a00 Data copied to user address 00007ff55033c0a0 CPU: 0 PID: 30322 Comm: syz-executor.0 Not tainted 6.6.0-14500-g1c41041124bd #10 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-1.fc38 04/01/2014 ===================================================== tipc_add_tlv() puts TLV descriptor and value onto `skb`. This size is calculated with TLV_SPACE() macro. It adds the size of struct tlv_desc and the length of TLV value passed as an argument, and aligns the result to a multiple of TLV_ALIGNTO, i.e., a multiple of 4 bytes. If the size of struct tlv_desc plus the length of TLV value is not aligned, the current implementation leaves the remaining bytes uninitialized. This is the cause of the above kernel-infoleak issue. This patch resolves this issue by clearing data up to an aligned size. Fixes: d0796d1ef63d ("tipc: convert legacy nl bearer dump to nl compat") Signed-off-by: Shigeru Yoshida Reviewed-by: Simon Horman Signed-off-by: David S. Miller --- net/tipc/netlink_compat.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/tipc/netlink_compat.c b/net/tipc/netlink_compat.c index 5bc076f2fa74..c763008a8adb 100644 --- a/net/tipc/netlink_compat.c +++ b/net/tipc/netlink_compat.c @@ -102,6 +102,7 @@ static int tipc_add_tlv(struct sk_buff *skb, u16 type, void *data, u16 len) return -EMSGSIZE; skb_put(skb, TLV_SPACE(len)); + memset(tlv, 0, TLV_SPACE(len)); tlv->tlv_type = htons(type); tlv->tlv_len = htons(TLV_LENGTH(len)); if (len && data) -- cgit v1.2.3 From ca8add922f9c7f6e2e3c71039da8e0dcc64b87ed Mon Sep 17 00:00:00 2001 From: Sven Auhagen Date: Sat, 11 Nov 2023 05:41:12 +0100 Subject: net: mvneta: fix calls to page_pool_get_stats Calling page_pool_get_stats in the mvneta driver without checks leads to kernel crashes. First the page pool is only available if the bm is not used. The page pool is also not allocated when the port is stopped. It can also be not allocated in case of errors. The current implementation leads to the following crash calling ethstats on a port that is down or when calling it at the wrong moment: ble to handle kernel NULL pointer dereference at virtual address 00000070 [00000070] *pgd=00000000 Internal error: Oops: 5 [#1] SMP ARM Hardware name: Marvell Armada 380/385 (Device Tree) PC is at page_pool_get_stats+0x18/0x1cc LR is at mvneta_ethtool_get_stats+0xa0/0xe0 [mvneta] pc : [] lr : [] psr: a0000013 sp : f1439d48 ip : f1439dc0 fp : 0000001d r10: 00000100 r9 : c4816b80 r8 : f0d75150 r7 : bf0b400c r6 : c238f000 r5 : 00000000 r4 : f1439d68 r3 : c2091040 r2 : ffffffd8 r1 : f1439d68 r0 : 00000000 Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none Control: 10c5387d Table: 066b004a DAC: 00000051 Register r0 information: NULL pointer Register r1 information: 2-page vmalloc region starting at 0xf1438000 allocated at kernel_clone+0x9c/0x390 Register r2 information: non-paged memory Register r3 information: slab kmalloc-2k start c2091000 pointer offset 64 size 2048 Register r4 information: 2-page vmalloc region starting at 0xf1438000 allocated at kernel_clone+0x9c/0x390 Register r5 information: NULL pointer Register r6 information: slab kmalloc-cg-4k start c238f000 pointer offset 0 size 4096 Register r7 information: 15-page vmalloc region starting at 0xbf0a8000 allocated at load_module+0xa30/0x219c Register r8 information: 1-page vmalloc region starting at 0xf0d75000 allocated at ethtool_get_stats+0x138/0x208 Register r9 information: slab task_struct start c4816b80 pointer offset 0 Register r10 information: non-paged memory Register r11 information: non-paged memory Register r12 information: 2-page vmalloc region starting at 0xf1438000 allocated at kernel_clone+0x9c/0x390 Process snmpd (pid: 733, stack limit = 0x38de3a88) Stack: (0xf1439d48 to 0xf143a000) 9d40: 000000c0 00000001 c238f000 bf0b400c f0d75150 c4816b80 9d60: 00000100 bf0a98d8 00000000 00000000 00000000 00000000 00000000 00000000 9d80: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 9da0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 9dc0: 00000dc0 5335509c 00000035 c238f000 bf0b2214 01067f50 f0d75000 c0b9b9c8 9de0: 0000001d 00000035 c2212094 5335509c c4816b80 c238f000 c5ad6e00 01067f50 9e00: c1b0be80 c4816b80 00014813 c0b9d7f0 00000000 00000000 0000001d 0000001d 9e20: 00000000 00001200 00000000 00000000 c216ed90 c73943b8 00000000 00000000 9e40: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 9e60: 00000000 c0ad9034 00000000 00000000 00000000 00000000 00000000 00000000 9e80: 00000000 00000000 00000000 5335509c c1b0be80 f1439ee4 00008946 c1b0be80 9ea0: 01067f50 f1439ee3 00000000 00000046 b6d77ae0 c0b383f0 00008946 becc83e8 9ec0: c1b0be80 00000051 0000000b c68ca480 c7172d00 c0ad8ff0 f1439ee3 cf600e40 9ee0: 01600e40 32687465 00000000 00000000 00000000 01067f50 00000000 00000000 9f00: 00000000 5335509c 00008946 00008946 00000000 c68ca480 becc83e8 c05e2de0 9f20: f1439fb0 c03002f0 00000006 5ac3c35a c4816b80 00000006 b6d77ae0 c030caf0 9f40: c4817350 00000014 f1439e1c 0000000c 00000000 00000051 01000000 00000014 9f60: 00003fec f1439edc 00000001 c0372abc b6d77ae0 c0372abc cf600e40 5335509c 9f80: c21e6800 01015c9c 0000000b 00008946 00000036 c03002f0 c4816b80 00000036 9fa0: b6d77ae0 c03000c0 01015c9c 0000000b 0000000b 00008946 becc83e8 00000000 9fc0: 01015c9c 0000000b 00008946 00000036 00000035 010678a0 b6d797ec b6d77ae0 9fe0: b6dbf738 becc838c b6d186d7 b6baa858 40000030 0000000b 00000000 00000000 page_pool_get_stats from mvneta_ethtool_get_stats+0xa0/0xe0 [mvneta] mvneta_ethtool_get_stats [mvneta] from ethtool_get_stats+0x154/0x208 ethtool_get_stats from dev_ethtool+0xf48/0x2480 dev_ethtool from dev_ioctl+0x538/0x63c dev_ioctl from sock_ioctl+0x49c/0x53c sock_ioctl from sys_ioctl+0x134/0xbd8 sys_ioctl from ret_fast_syscall+0x0/0x1c Exception stack(0xf1439fa8 to 0xf1439ff0) 9fa0: 01015c9c 0000000b 0000000b 00008946 becc83e8 00000000 9fc0: 01015c9c 0000000b 00008946 00000036 00000035 010678a0 b6d797ec b6d77ae0 9fe0: b6dbf738 becc838c b6d186d7 b6baa858 Code: e28dd004 e1a05000 e2514000 0a00006a (e5902070) This commit adds the proper checks before calling page_pool_get_stats. Fixes: b3fc79225f05 ("net: mvneta: add support for page_pool_get_stats") Signed-off-by: Sven Auhagen Reported-by: Paulo Da Silva Acked-by: Lorenzo Bianconi Signed-off-by: David S. Miller --- drivers/net/ethernet/marvell/mvneta.c | 28 ++++++++++++++++++++-------- 1 file changed, 20 insertions(+), 8 deletions(-) diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c index 90817136808d..29aac327574d 100644 --- a/drivers/net/ethernet/marvell/mvneta.c +++ b/drivers/net/ethernet/marvell/mvneta.c @@ -4790,14 +4790,17 @@ static void mvneta_ethtool_get_strings(struct net_device *netdev, u32 sset, u8 *data) { if (sset == ETH_SS_STATS) { + struct mvneta_port *pp = netdev_priv(netdev); int i; for (i = 0; i < ARRAY_SIZE(mvneta_statistics); i++) memcpy(data + i * ETH_GSTRING_LEN, mvneta_statistics[i].name, ETH_GSTRING_LEN); - data += ETH_GSTRING_LEN * ARRAY_SIZE(mvneta_statistics); - page_pool_ethtool_stats_get_strings(data); + if (!pp->bm_priv) { + data += ETH_GSTRING_LEN * ARRAY_SIZE(mvneta_statistics); + page_pool_ethtool_stats_get_strings(data); + } } } @@ -4915,8 +4918,10 @@ static void mvneta_ethtool_pp_stats(struct mvneta_port *pp, u64 *data) struct page_pool_stats stats = {}; int i; - for (i = 0; i < rxq_number; i++) - page_pool_get_stats(pp->rxqs[i].page_pool, &stats); + for (i = 0; i < rxq_number; i++) { + if (pp->rxqs[i].page_pool) + page_pool_get_stats(pp->rxqs[i].page_pool, &stats); + } page_pool_ethtool_stats_get(data, &stats); } @@ -4932,14 +4937,21 @@ static void mvneta_ethtool_get_stats(struct net_device *dev, for (i = 0; i < ARRAY_SIZE(mvneta_statistics); i++) *data++ = pp->ethtool_stats[i]; - mvneta_ethtool_pp_stats(pp, data); + if (!pp->bm_priv) + mvneta_ethtool_pp_stats(pp, data); } static int mvneta_ethtool_get_sset_count(struct net_device *dev, int sset) { - if (sset == ETH_SS_STATS) - return ARRAY_SIZE(mvneta_statistics) + - page_pool_ethtool_stats_get_count(); + if (sset == ETH_SS_STATS) { + int count = ARRAY_SIZE(mvneta_statistics); + struct mvneta_port *pp = netdev_priv(dev); + + if (!pp->bm_priv) + count += page_pool_ethtool_stats_get_count(); + + return count; + } return -EOPNOTSUPP; } -- cgit v1.2.3 From c0a2a1b0d631fc460d830f52d06211838874d655 Mon Sep 17 00:00:00 2001 From: Willem de Bruijn Date: Sun, 12 Nov 2023 22:16:32 -0500 Subject: ppp: limit MRU to 64K ppp_sync_ioctl allows setting device MRU, but does not sanity check this input. Limit to a sane upper bound of 64KB. No implementation I could find generates larger than 64KB frames. RFC 2823 mentions an upper bound of PPP over SDL of 64KB based on the 16-bit length field. Other protocols will be smaller, such as PPPoE (9KB jumbo frame) and PPPoA (18190 maximum CPCS-SDU size, RFC 2364). PPTP and L2TP encapsulate in IP. Syzbot managed to trigger alloc warning in __alloc_pages: if (WARN_ON_ONCE_GFP(order > MAX_ORDER, gfp)) WARNING: CPU: 1 PID: 37 at mm/page_alloc.c:4544 __alloc_pages+0x3ab/0x4a0 mm/page_alloc.c:4544 __alloc_skb+0x12b/0x330 net/core/skbuff.c:651 __netdev_alloc_skb+0x72/0x3f0 net/core/skbuff.c:715 netdev_alloc_skb include/linux/skbuff.h:3225 [inline] dev_alloc_skb include/linux/skbuff.h:3238 [inline] ppp_sync_input drivers/net/ppp/ppp_synctty.c:669 [inline] ppp_sync_receive+0xff/0x680 drivers/net/ppp/ppp_synctty.c:334 tty_ldisc_receive_buf+0x14c/0x180 drivers/tty/tty_buffer.c:390 tty_port_default_receive_buf+0x70/0xb0 drivers/tty/tty_port.c:37 receive_buf drivers/tty/tty_buffer.c:444 [inline] flush_to_ldisc+0x261/0x780 drivers/tty/tty_buffer.c:494 process_one_work+0x884/0x15c0 kernel/workqueue.c:2630 With call ioctl$PPPIOCSMRU1(r1, 0x40047452, &(0x7f0000000100)=0x5e6417a8) Similar code exists in other drivers that implement ppp_channel_ops ioctl PPPIOCSMRU. Those might also be in scope. Notably excluded from this are pppol2tp_ioctl and pppoe_ioctl. This code goes back to the start of git history. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: syzbot+6177e1f90d92583bcc58@syzkaller.appspotmail.com Signed-off-by: Willem de Bruijn Reviewed-by: Eric Dumazet Signed-off-by: David S. Miller --- drivers/net/ppp/ppp_synctty.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/net/ppp/ppp_synctty.c b/drivers/net/ppp/ppp_synctty.c index ea261a628786..52d05ce4a281 100644 --- a/drivers/net/ppp/ppp_synctty.c +++ b/drivers/net/ppp/ppp_synctty.c @@ -453,6 +453,10 @@ ppp_sync_ioctl(struct ppp_channel *chan, unsigned int cmd, unsigned long arg) case PPPIOCSMRU: if (get_user(val, (int __user *) argp)) break; + if (val > U16_MAX) { + err = -EINVAL; + break; + } if (val < PPP_MRU) val = PPP_MRU; ap->mru = val; -- cgit v1.2.3 From 3fad96e9b21bed214c1593d7d7fb3e40d1fbf6f4 Mon Sep 17 00:00:00 2001 From: Sudeep Holla Date: Tue, 24 Oct 2023 11:57:15 +0100 Subject: firmware: arm_ffa: Declare ffa_bus_type structure in the header smatch reports: drivers/firmware/arm_ffa/bus.c:108:17: warning: symbol 'ffa_bus_type' was not declared. Should it be static? ffa_bus_type is exported to be useful in the FF-A driver. So this warning is not correct. However, declaring the ffa_bus_type structure in the header like many other bus_types do already removes this warning. So let us just do the same and get rid of the warning. Link: https://lore.kernel.org/r/20231024105715.2369638-1-sudeep.holla@arm.com Signed-off-by: Sudeep Holla --- include/linux/arm_ffa.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/include/linux/arm_ffa.h b/include/linux/arm_ffa.h index 1abedb5b2e48..3d0fde57ba90 100644 --- a/include/linux/arm_ffa.h +++ b/include/linux/arm_ffa.h @@ -209,6 +209,8 @@ bool ffa_device_is_valid(struct ffa_device *ffa_dev) { return false; } #define module_ffa_driver(__ffa_driver) \ module_driver(__ffa_driver, ffa_register, ffa_unregister) +extern struct bus_type ffa_bus_type; + /* FFA transport related */ struct ffa_partition_info { u16 id; -- cgit v1.2.3 From 95520fc07743d3f58e8872acd72e928b09fbc143 Mon Sep 17 00:00:00 2001 From: Sudeep Holla Date: Tue, 24 Oct 2023 11:56:17 +0100 Subject: firmware: arm_ffa: Allow FF-A initialisation even when notification fails FF-A notifications are optional feature in the specification. Currently we allow to continue if the firmware reports no support for the notifications. However, we fail to continue and complete the FF-A driver initialisation if the notification setup fails for any reason. Let us allow the FF-A driver to complete the initialisation even if the notification fails to setup. We will just flag the error and continue to provide other features in the driver. Link: https://lore.kernel.org/r/20231024-ffa-notification-fixes-v1-1-d552c0ec260d@arm.com Tested-by: Jens Wiklander Signed-off-by: Sudeep Holla --- drivers/firmware/arm_ffa/driver.c | 20 ++++++++------------ 1 file changed, 8 insertions(+), 12 deletions(-) diff --git a/drivers/firmware/arm_ffa/driver.c b/drivers/firmware/arm_ffa/driver.c index 07b72c679247..585632a444b4 100644 --- a/drivers/firmware/arm_ffa/driver.c +++ b/drivers/firmware/arm_ffa/driver.c @@ -1390,20 +1390,20 @@ static void ffa_notifications_cleanup(void) } } -static int ffa_notifications_setup(void) +static void ffa_notifications_setup(void) { int ret, irq; ret = ffa_features(FFA_NOTIFICATION_BITMAP_CREATE, 0, NULL, NULL); if (ret) { - pr_err("Notifications not supported, continuing with it ..\n"); - return 0; + pr_info("Notifications not supported, continuing with it ..\n"); + return; } ret = ffa_notification_bitmap_create(); if (ret) { - pr_err("notification_bitmap_create error %d\n", ret); - return ret; + pr_info("Notification bitmap create error %d\n", ret); + return; } drv_info->bitmap_created = true; @@ -1426,10 +1426,10 @@ static int ffa_notifications_setup(void) ret = ffa_sched_recv_cb_update(drv_info->vm_id, ffa_self_notif_handle, drv_info, true); if (!ret) - return ret; + return; cleanup: + pr_info("Notification setup failed %d, not enabled\n", ret); ffa_notifications_cleanup(); - return ret; } static int __init ffa_init(void) @@ -1487,13 +1487,9 @@ static int __init ffa_init(void) ffa_set_up_mem_ops_native_flag(); - ret = ffa_notifications_setup(); - if (ret) - goto partitions_cleanup; + ffa_notifications_setup(); return 0; -partitions_cleanup: - ffa_partitions_cleanup(); free_pages: if (drv_info->tx_buffer) free_pages_exact(drv_info->tx_buffer, RXTX_BUFFER_SIZE); -- cgit v1.2.3 From 6f47023f7a52f3482937e9271ba41570b8752067 Mon Sep 17 00:00:00 2001 From: Sudeep Holla Date: Tue, 24 Oct 2023 11:56:18 +0100 Subject: firmware: arm_ffa: Setup the partitions after the notification initialisation Currently the notifications are setup of the partitions are probed and FF-A devices are added on the FF-A bus. The FF-A driver probe can be called even before the FF-A notification setup happens which is wrong and may result in failure or misbehaviour in the FF-A partition device probe. In order to ensure the FF-A notifications are setup before the FF-A devices are probed, let us move the FF-A partition setup after the completion of FF-A notification setup. Link: https://lore.kernel.org/r/20231024-ffa-notification-fixes-v1-2-d552c0ec260d@arm.com Tested-by: Jens Wiklander Signed-off-by: Sudeep Holla --- drivers/firmware/arm_ffa/driver.c | 15 ++++++++------- 1 file changed, 8 insertions(+), 7 deletions(-) diff --git a/drivers/firmware/arm_ffa/driver.c b/drivers/firmware/arm_ffa/driver.c index 585632a444b4..69ad3add3175 100644 --- a/drivers/firmware/arm_ffa/driver.c +++ b/drivers/firmware/arm_ffa/driver.c @@ -1422,11 +1422,7 @@ static void ffa_notifications_setup(void) hash_init(drv_info->notifier_hash); mutex_init(&drv_info->notify_lock); - /* Register internal scheduling callback */ - ret = ffa_sched_recv_cb_update(drv_info->vm_id, ffa_self_notif_handle, - drv_info, true); - if (!ret) - return; + return; cleanup: pr_info("Notification setup failed %d, not enabled\n", ret); ffa_notifications_cleanup(); @@ -1483,12 +1479,17 @@ static int __init ffa_init(void) mutex_init(&drv_info->rx_lock); mutex_init(&drv_info->tx_lock); - ffa_setup_partitions(); - ffa_set_up_mem_ops_native_flag(); ffa_notifications_setup(); + ffa_setup_partitions(); + + ret = ffa_sched_recv_cb_update(drv_info->vm_id, ffa_self_notif_handle, + drv_info, true); + if (ret) + pr_info("Failed to register driver sched callback %d\n", ret); + return 0; free_pages: if (drv_info->tx_buffer) -- cgit v1.2.3 From f4bfcaee34bc9527274710884f8d14039f3ee506 Mon Sep 17 00:00:00 2001 From: Sudeep Holla Date: Tue, 24 Oct 2023 11:56:19 +0100 Subject: firmware: arm_ffa: Add checks for the notification enabled state We need to check if the FF-A notifications are enabled or not in all the notification operations that are accessible for the FF-A device from the FF-A driver. This helps to avoid making calls to the FF-A firmware even if the notification setup has failed. Link: https://lore.kernel.org/r/20231024-ffa-notification-fixes-v1-3-d552c0ec260d@arm.com Tested-by: Jens Wiklander Signed-off-by: Sudeep Holla --- drivers/firmware/arm_ffa/driver.c | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) diff --git a/drivers/firmware/arm_ffa/driver.c b/drivers/firmware/arm_ffa/driver.c index 69ad3add3175..1724a0cbb2cf 100644 --- a/drivers/firmware/arm_ffa/driver.c +++ b/drivers/firmware/arm_ffa/driver.c @@ -99,6 +99,7 @@ struct ffa_drv_info { void *tx_buffer; bool mem_ops_native; bool bitmap_created; + bool notif_enabled; unsigned int sched_recv_irq; unsigned int cpuhp_state; struct ffa_pcpu_irq __percpu *irq_pcpu; @@ -889,6 +890,8 @@ static int ffa_memory_lend(struct ffa_mem_ops_args *args) #define FFA_SECURE_PARTITION_ID_FLAG BIT(15) +#define ffa_notifications_disabled() (!drv_info->notif_enabled) + enum notify_type { NON_SECURE_VM, SECURE_PARTITION, @@ -908,6 +911,9 @@ static int ffa_sched_recv_cb_update(u16 part_id, ffa_sched_recv_cb callback, struct ffa_dev_part_info *partition; bool cb_valid; + if (ffa_notifications_disabled()) + return -EOPNOTSUPP; + partition = xa_load(&drv_info->partition_info, part_id); write_lock(&partition->rw_lock); @@ -1001,6 +1007,9 @@ static int ffa_notify_relinquish(struct ffa_device *dev, int notify_id) int rc; enum notify_type type = ffa_notify_type_get(dev->vm_id); + if (ffa_notifications_disabled()) + return -EOPNOTSUPP; + if (notify_id >= FFA_MAX_NOTIFICATIONS) return -EINVAL; @@ -1027,6 +1036,9 @@ static int ffa_notify_request(struct ffa_device *dev, bool is_per_vcpu, u32 flags = 0; enum notify_type type = ffa_notify_type_get(dev->vm_id); + if (ffa_notifications_disabled()) + return -EOPNOTSUPP; + if (notify_id >= FFA_MAX_NOTIFICATIONS) return -EINVAL; @@ -1057,6 +1069,9 @@ static int ffa_notify_send(struct ffa_device *dev, int notify_id, { u32 flags = 0; + if (ffa_notifications_disabled()) + return -EOPNOTSUPP; + if (is_per_vcpu) flags |= (PER_VCPU_NOTIFICATION_FLAG | vcpu << 16); @@ -1388,6 +1403,7 @@ static void ffa_notifications_cleanup(void) ffa_notification_bitmap_destroy(); drv_info->bitmap_created = false; } + drv_info->notif_enabled = false; } static void ffa_notifications_setup(void) @@ -1422,6 +1438,7 @@ static void ffa_notifications_setup(void) hash_init(drv_info->notifier_hash); mutex_init(&drv_info->notify_lock); + drv_info->notif_enabled = true; return; cleanup: pr_info("Notification setup failed %d, not enabled\n", ret); -- cgit v1.2.3 From 6d67cbe67a86a87307df0c6fafa74394a6820ad6 Mon Sep 17 00:00:00 2001 From: Sudeep Holla Date: Tue, 24 Oct 2023 11:56:20 +0100 Subject: firmware: arm_ffa: Fix FFA notifications cleanup path We allow the FF-A to be initialised successfully even when notification fails. When the notification fails, ffa_notifications_cleanup() gets called on the failure path. However, the driver information about the notifications like the irq, workqueues and cpu hotplug state for enabling and disabling percpu IRQ are not cleared. This may result in unexpected behaviour during CPU hotplug because of percpu IRQ being enabled and disabled or during the driver removal when ffa_notifications_cleanup() gets executed again. Fix the FFA notifications cleanup path by clearing all the notification related driver information. Link: https://lore.kernel.org/r/20231024-ffa-notification-fixes-v1-4-d552c0ec260d@arm.com Tested-by: Jens Wiklander Signed-off-by: Sudeep Holla --- drivers/firmware/arm_ffa/driver.c | 16 ++++++++++++---- 1 file changed, 12 insertions(+), 4 deletions(-) diff --git a/drivers/firmware/arm_ffa/driver.c b/drivers/firmware/arm_ffa/driver.c index 1724a0cbb2cf..49ebdc2775dd 100644 --- a/drivers/firmware/arm_ffa/driver.c +++ b/drivers/firmware/arm_ffa/driver.c @@ -1326,8 +1326,10 @@ static int ffa_sched_recv_irq_map(void) static void ffa_sched_recv_irq_unmap(void) { - if (drv_info->sched_recv_irq) + if (drv_info->sched_recv_irq) { irq_dispose_mapping(drv_info->sched_recv_irq); + drv_info->sched_recv_irq = 0; + } } static int ffa_cpuhp_pcpu_irq_enable(unsigned int cpu) @@ -1344,17 +1346,23 @@ static int ffa_cpuhp_pcpu_irq_disable(unsigned int cpu) static void ffa_uninit_pcpu_irq(void) { - if (drv_info->cpuhp_state) + if (drv_info->cpuhp_state) { cpuhp_remove_state(drv_info->cpuhp_state); + drv_info->cpuhp_state = 0; + } - if (drv_info->notif_pcpu_wq) + if (drv_info->notif_pcpu_wq) { destroy_workqueue(drv_info->notif_pcpu_wq); + drv_info->notif_pcpu_wq = NULL; + } if (drv_info->sched_recv_irq) free_percpu_irq(drv_info->sched_recv_irq, drv_info->irq_pcpu); - if (drv_info->irq_pcpu) + if (drv_info->irq_pcpu) { free_percpu(drv_info->irq_pcpu); + drv_info->irq_pcpu = NULL; + } } static int ffa_init_pcpu_irq(unsigned int irq) -- cgit v1.2.3 From 05857a1eb723190923b091a857184ced17a83770 Mon Sep 17 00:00:00 2001 From: Sudeep Holla Date: Tue, 31 Oct 2023 14:13:35 +0000 Subject: firmware: arm_ffa: Fix the size of the allocation in ffa_partitions_cleanup() Arry of pointer to struct ffa_dev_part_info needs to be allocated to fetch the pointers stored in XArray. However, currently we allocate the entire structure instead of just pointers. Fix the allocation size. This will also eliminate the below Smatch istatic checker warning: | drivers/firmware/arm_ffa/driver.c:1251 ffa_partitions_cleanup() | warn: double check that we're allocating correct size: 8 vs 88 Reported-by: Dan Carpenter Closes: https://lore.kernel.org/all/0e8ddbca-d9da-4a3b-aae3-328993b62ba2@moroto.mountain Link: https://lore.kernel.org/r/20231031141335.3077026-1-sudeep.holla@arm.com Signed-off-by: Sudeep Holla --- drivers/firmware/arm_ffa/driver.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/firmware/arm_ffa/driver.c b/drivers/firmware/arm_ffa/driver.c index 49ebdc2775dd..034bce8a2ca1 100644 --- a/drivers/firmware/arm_ffa/driver.c +++ b/drivers/firmware/arm_ffa/driver.c @@ -1248,7 +1248,7 @@ static void ffa_partitions_cleanup(void) if (!count) return; - info = kcalloc(count, sizeof(**info), GFP_KERNEL); + info = kcalloc(count, sizeof(*info), GFP_KERNEL); if (!info) return; -- cgit v1.2.3 From f1ed48ef97e2d12dee21e42db4a6ebb895ed3a79 Mon Sep 17 00:00:00 2001 From: Lorenzo Pieralisi Date: Wed, 8 Nov 2023 12:15:49 +0100 Subject: firmware: arm_ffa: Fix ffa_notification_info_get() IDs handling To parse the retrieved ID lists appropriately in ffa_notification_info_get() the ids_processed variable should not be pre-incremented - we are dropping an identifier at the beginning of the list. Fix it by using the post-increment operator to increment the number of processed IDs. Fixes: 3522be48d82b ("firmware: arm_ffa: Implement the NOTIFICATION_INFO_GET interface") Signed-off-by: Lorenzo Pieralisi Cc: Sudeep Holla Link: https://lore.kernel.org/r/20231108111549.155974-1-lpieralisi@kernel.org Signed-off-by: Sudeep Holla --- drivers/firmware/arm_ffa/driver.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/firmware/arm_ffa/driver.c b/drivers/firmware/arm_ffa/driver.c index 034bce8a2ca1..6146b2927d5c 100644 --- a/drivers/firmware/arm_ffa/driver.c +++ b/drivers/firmware/arm_ffa/driver.c @@ -783,7 +783,7 @@ static void ffa_notification_info_get(void) if (ids_processed >= max_ids - 1) break; - part_id = packed_id_list[++ids_processed]; + part_id = packed_id_list[ids_processed++]; if (!ids_count[list]) { /* Global Notification */ __do_sched_recv_cb(part_id, 0, false); @@ -795,7 +795,7 @@ static void ffa_notification_info_get(void) if (ids_processed >= max_ids - 1) break; - vcpu_id = packed_id_list[++ids_processed]; + vcpu_id = packed_id_list[ids_processed++]; __do_sched_recv_cb(part_id, vcpu_id, true); } -- cgit v1.2.3 From 0c6498a59fbbcbf3d0a58c282dd6f0bca0eed92a Mon Sep 17 00:00:00 2001 From: Matus Malych Date: Sun, 12 Nov 2023 17:54:04 +0100 Subject: ASoC: amd: yc: Add HP 255 G10 into quirk table HP 255 G10's internal microphone array can be made to work by adding it to the quirk table. Signed-off-by: Matus Malych Link: https://lore.kernel.org/r/20231112165403.3221-1-matus@malych.org Signed-off-by: Mark Brown --- sound/soc/amd/yc/acp6x-mach.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/sound/soc/amd/yc/acp6x-mach.c b/sound/soc/amd/yc/acp6x-mach.c index 15a864dcd7bd..e2a510443bf1 100644 --- a/sound/soc/amd/yc/acp6x-mach.c +++ b/sound/soc/amd/yc/acp6x-mach.c @@ -367,6 +367,13 @@ static const struct dmi_system_id yc_acp_quirk_table[] = { DMI_MATCH(DMI_BOARD_NAME, "8A3E"), } }, + { + .driver_data = &acp6x_card, + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "HP"), + DMI_MATCH(DMI_BOARD_NAME, "8B2F"), + } + }, { .driver_data = &acp6x_card, .matches = { -- cgit v1.2.3 From b0eeba527e704d6023a6cd9103f929226e326b03 Mon Sep 17 00:00:00 2001 From: Chen Ni Date: Tue, 31 Oct 2023 08:08:07 +0000 Subject: pinctrl: stm32: Add check for devm_kcalloc Add check for the return value of devm_kcalloc() and return the error if it fails in order to avoid NULL pointer dereference. Fixes: 32c170ff15b0 ("pinctrl: stm32: set default gpio line names using pin names") Signed-off-by: Chen Ni Acked-by: Valentin Caron Link: https://lore.kernel.org/r/20231031080807.3600656-1-nichen@iscas.ac.cn Signed-off-by: Linus Walleij --- drivers/pinctrl/stm32/pinctrl-stm32.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/pinctrl/stm32/pinctrl-stm32.c b/drivers/pinctrl/stm32/pinctrl-stm32.c index 64e8201c7eac..3a9c458d3fc9 100644 --- a/drivers/pinctrl/stm32/pinctrl-stm32.c +++ b/drivers/pinctrl/stm32/pinctrl-stm32.c @@ -1368,6 +1368,11 @@ static int stm32_gpiolib_register_bank(struct stm32_pinctrl *pctl, struct fwnode } names = devm_kcalloc(dev, npins, sizeof(char *), GFP_KERNEL); + if (!names) { + err = -ENOMEM; + goto err_clk; + } + for (i = 0; i < npins; i++) { stm32_pin = stm32_pctrl_get_desc_pin_from_gpio(pctl, bank, i); if (stm32_pin && stm32_pin->pin.name) -- cgit v1.2.3 From 47d970204054f859f35a2237baa75c2d84fcf436 Mon Sep 17 00:00:00 2001 From: Juergen Gross Date: Mon, 25 Sep 2023 17:54:13 +0200 Subject: xen/events: fix delayed eoi list handling When delaying eoi handling of events, the related elements are queued into the percpu lateeoi list. In case the list isn't empty, the elements should be sorted by the time when eoi handling is to happen. Unfortunately a new element will never be queued at the start of the list, even if it has a handling time lower than all other list elements. Fix that by handling that case the same way as for an empty list. Fixes: e99502f76271 ("xen/events: defer eoi in case of excessive number of events") Reported-by: Jan Beulich Signed-off-by: Juergen Gross Reviewed-by: Oleksandr Tyshchenko Signed-off-by: Juergen Gross --- drivers/xen/events/events_base.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/xen/events/events_base.c b/drivers/xen/events/events_base.c index 237e6b884f72..cd33a418344a 100644 --- a/drivers/xen/events/events_base.c +++ b/drivers/xen/events/events_base.c @@ -604,7 +604,9 @@ static void lateeoi_list_add(struct irq_info *info) spin_lock_irqsave(&eoi->eoi_list_lock, flags); - if (list_empty(&eoi->eoi_list)) { + elem = list_first_entry_or_null(&eoi->eoi_list, struct irq_info, + eoi_list); + if (!elem || info->eoi_time < elem->eoi_time) { list_add(&info->eoi_list, &eoi->eoi_list); mod_delayed_work_on(info->eoi_cpu, system_wq, &eoi->delayed, delay); -- cgit v1.2.3 From f96c6c588ca81255566a5168e51c9cbbe7b86def Mon Sep 17 00:00:00 2001 From: Juergen Gross Date: Tue, 26 Sep 2023 14:29:54 +0200 Subject: xen/events: remove unused functions There are no users of xen_irq_from_pirq() and xen_set_irq_pending(). Remove those functions. Signed-off-by: Juergen Gross Reviewed-by: Oleksandr Tyshchenko Signed-off-by: Juergen Gross --- drivers/xen/events/events_base.c | 30 ------------------------------ include/xen/events.h | 4 ---- 2 files changed, 34 deletions(-) diff --git a/drivers/xen/events/events_base.c b/drivers/xen/events/events_base.c index cd33a418344a..c5d86128eb73 100644 --- a/drivers/xen/events/events_base.c +++ b/drivers/xen/events/events_base.c @@ -1169,29 +1169,6 @@ out: return rc; } -int xen_irq_from_pirq(unsigned pirq) -{ - int irq; - - struct irq_info *info; - - mutex_lock(&irq_mapping_update_lock); - - list_for_each_entry(info, &xen_irq_list_head, list) { - if (info->type != IRQT_PIRQ) - continue; - irq = info->irq; - if (info->u.pirq.pirq == pirq) - goto out; - } - irq = -1; -out: - mutex_unlock(&irq_mapping_update_lock); - - return irq; -} - - int xen_pirq_from_irq(unsigned irq) { return pirq_from_irq(irq); @@ -2031,13 +2008,6 @@ void xen_clear_irq_pending(int irq) event_handler_exit(info); } EXPORT_SYMBOL(xen_clear_irq_pending); -void xen_set_irq_pending(int irq) -{ - evtchn_port_t evtchn = evtchn_from_irq(irq); - - if (VALID_EVTCHN(evtchn)) - set_evtchn(evtchn); -} bool xen_test_irq_pending(int irq) { diff --git a/include/xen/events.h b/include/xen/events.h index 23932b0673dc..a129cafa80ed 100644 --- a/include/xen/events.h +++ b/include/xen/events.h @@ -88,7 +88,6 @@ void xen_irq_resume(void); /* Clear an irq's pending state, in preparation for polling on it */ void xen_clear_irq_pending(int irq); -void xen_set_irq_pending(int irq); bool xen_test_irq_pending(int irq); /* Poll waiting for an irq to become pending. In the usual case, the @@ -122,9 +121,6 @@ int xen_bind_pirq_msi_to_irq(struct pci_dev *dev, struct msi_desc *msidesc, /* De-allocates the above mentioned physical interrupt. */ int xen_destroy_irq(int irq); -/* Return irq from pirq */ -int xen_irq_from_pirq(unsigned pirq); - /* Return the pirq allocated to the irq. */ int xen_pirq_from_irq(unsigned irq); -- cgit v1.2.3 From b0077e269f6c152e807fdac90b58caf012cdbaab Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Mon, 13 Nov 2023 11:52:31 +0800 Subject: blk-mq: make sure active queue usage is held for bio_integrity_prep() blk_integrity_unregister() can come if queue usage counter isn't held for one bio with integrity prepared, so this request may be completed with calling profile->complete_fn, then kernel panic. Another constraint is that bio_integrity_prep() needs to be called before bio merge. Fix the issue by: - call bio_integrity_prep() with one queue usage counter grabbed reliably - call bio_integrity_prep() before bio merge Fixes: 900e080752025f00 ("block: move queue enter logic into blk_mq_submit_bio()") Reported-by: Yi Zhang Cc: Christoph Hellwig Signed-off-by: Ming Lei Tested-by: Yi Zhang Link: https://lore.kernel.org/r/20231113035231.2708053-1-ming.lei@redhat.com Signed-off-by: Jens Axboe --- block/blk-mq.c | 75 +++++++++++++++++++++++++++++----------------------------- 1 file changed, 38 insertions(+), 37 deletions(-) diff --git a/block/blk-mq.c b/block/blk-mq.c index e2d11183f62e..900c1be1fee1 100644 --- a/block/blk-mq.c +++ b/block/blk-mq.c @@ -2858,11 +2858,8 @@ static struct request *blk_mq_get_new_requests(struct request_queue *q, }; struct request *rq; - if (unlikely(bio_queue_enter(bio))) - return NULL; - if (blk_mq_attempt_bio_merge(q, bio, nsegs)) - goto queue_exit; + return NULL; rq_qos_throttle(q, bio); @@ -2878,35 +2875,23 @@ static struct request *blk_mq_get_new_requests(struct request_queue *q, rq_qos_cleanup(q, bio); if (bio->bi_opf & REQ_NOWAIT) bio_wouldblock_error(bio); -queue_exit: - blk_queue_exit(q); return NULL; } -static inline struct request *blk_mq_get_cached_request(struct request_queue *q, - struct blk_plug *plug, struct bio **bio, unsigned int nsegs) +/* return true if this @rq can be used for @bio */ +static bool blk_mq_can_use_cached_rq(struct request *rq, struct blk_plug *plug, + struct bio *bio) { - struct request *rq; - enum hctx_type type, hctx_type; + enum hctx_type type = blk_mq_get_hctx_type(bio->bi_opf); + enum hctx_type hctx_type = rq->mq_hctx->type; - if (!plug) - return NULL; - rq = rq_list_peek(&plug->cached_rq); - if (!rq || rq->q != q) - return NULL; + WARN_ON_ONCE(rq_list_peek(&plug->cached_rq) != rq); - if (blk_mq_attempt_bio_merge(q, *bio, nsegs)) { - *bio = NULL; - return NULL; - } - - type = blk_mq_get_hctx_type((*bio)->bi_opf); - hctx_type = rq->mq_hctx->type; if (type != hctx_type && !(type == HCTX_TYPE_READ && hctx_type == HCTX_TYPE_DEFAULT)) - return NULL; - if (op_is_flush(rq->cmd_flags) != op_is_flush((*bio)->bi_opf)) - return NULL; + return false; + if (op_is_flush(rq->cmd_flags) != op_is_flush(bio->bi_opf)) + return false; /* * If any qos ->throttle() end up blocking, we will have flushed the @@ -2914,12 +2899,12 @@ static inline struct request *blk_mq_get_cached_request(struct request_queue *q, * before we throttle. */ plug->cached_rq = rq_list_next(rq); - rq_qos_throttle(q, *bio); + rq_qos_throttle(rq->q, bio); blk_mq_rq_time_init(rq, 0); - rq->cmd_flags = (*bio)->bi_opf; + rq->cmd_flags = bio->bi_opf; INIT_LIST_HEAD(&rq->queuelist); - return rq; + return true; } static void bio_set_ioprio(struct bio *bio) @@ -2949,7 +2934,7 @@ void blk_mq_submit_bio(struct bio *bio) struct blk_plug *plug = blk_mq_plug(bio); const int is_sync = op_is_sync(bio->bi_opf); struct blk_mq_hw_ctx *hctx; - struct request *rq; + struct request *rq = NULL; unsigned int nr_segs = 1; blk_status_t ret; @@ -2960,20 +2945,36 @@ void blk_mq_submit_bio(struct bio *bio) return; } - if (!bio_integrity_prep(bio)) - return; - bio_set_ioprio(bio); - rq = blk_mq_get_cached_request(q, plug, &bio, nr_segs); - if (!rq) { - if (!bio) + if (plug) { + rq = rq_list_peek(&plug->cached_rq); + if (rq && rq->q != q) + rq = NULL; + } + if (rq) { + if (!bio_integrity_prep(bio)) return; - rq = blk_mq_get_new_requests(q, plug, bio, nr_segs); - if (unlikely(!rq)) + if (blk_mq_attempt_bio_merge(q, bio, nr_segs)) return; + if (blk_mq_can_use_cached_rq(rq, plug, bio)) + goto done; + percpu_ref_get(&q->q_usage_counter); + } else { + if (unlikely(bio_queue_enter(bio))) + return; + if (!bio_integrity_prep(bio)) + goto fail; + } + + rq = blk_mq_get_new_requests(q, plug, bio, nr_segs); + if (unlikely(!rq)) { +fail: + blk_queue_exit(q); + return; } +done: trace_block_getrq(bio); rq_qos_track(q, rq, bio); -- cgit v1.2.3 From d02ef87db9d6137fc2a98231b92f24ead4f7966d Mon Sep 17 00:00:00 2001 From: Simon Trimmer Date: Mon, 13 Nov 2023 16:40:29 +0000 Subject: ALSA: hda: cs35l56: Enable low-power hibernation mode on i2c This can now be re-enabled as the sequence to reliably wake the device has been implemented in the shared ASoC code. This has a functional dependency on commit 3df761bdbc8b ("ASoC: cs35l56: Wake transactions need to be issued twice") To protect against this, enabling hibernation is conditional on CS35L56_WAKE_HOLD_TIME_US being defined, which indicates that the new hibernation sequences are available. Signed-off-by: Simon Trimmer Signed-off-by: Richard Fitzgerald Link: https://lore.kernel.org/r/20231113164029.1156669-1-rf@opensource.cirrus.com Signed-off-by: Takashi Iwai --- sound/pci/hda/cs35l56_hda_i2c.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/sound/pci/hda/cs35l56_hda_i2c.c b/sound/pci/hda/cs35l56_hda_i2c.c index 757a4d193e0f..a9ef6d86de83 100644 --- a/sound/pci/hda/cs35l56_hda_i2c.c +++ b/sound/pci/hda/cs35l56_hda_i2c.c @@ -21,6 +21,10 @@ static int cs35l56_hda_i2c_probe(struct i2c_client *clt) return -ENOMEM; cs35l56->base.dev = &clt->dev; + +#ifdef CS35L56_WAKE_HOLD_TIME_US + cs35l56->base.can_hibernate = true; +#endif cs35l56->base.regmap = devm_regmap_init_i2c(clt, &cs35l56_regmap_i2c); if (IS_ERR(cs35l56->base.regmap)) { ret = PTR_ERR(cs35l56->base.regmap); -- cgit v1.2.3 From 58c09cad1754c56cb000ef07477e8781e3fad4d3 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Mon, 13 Nov 2023 08:52:24 -0800 Subject: drm/ci: make github dependabot happy again The drm CI scripts for gitlab have a requirements file that makes the github 'dependabot' worry about a few of the required tooling versions. It wants to update the pip requirements from 23.2.1 to 23.3: "When installing a package from a Mercurial VCS URL, e.g. pip install hg+..., with pip prior to v23.3, the specified Mercurial revision could be used to inject arbitrary configuration options to the hg clone call (e.g. --config). Controlling the Mercurial configuration can modify how and which repository is installed. This vulnerability does not affect users who aren't installing from Mercurial" and upgrade the urllib3 requirements from 2.0.4 to 2.0.7 due to two issues: "urllib3's request body not stripped after redirect from 303 status changes request method to GET" "`Cookie` HTTP header isn't stripped on cross-origin redirects" The file also ends up not having a newline at the end, that my editor ends up wanting to fix automatically. Link: https://github.com/dependabot Tested-by: Helen Koike Signed-off-by: Linus Torvalds --- drivers/gpu/drm/ci/xfails/requirements.txt | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/ci/xfails/requirements.txt b/drivers/gpu/drm/ci/xfails/requirements.txt index d8856d1581fd..e9994c9db799 100644 --- a/drivers/gpu/drm/ci/xfails/requirements.txt +++ b/drivers/gpu/drm/ci/xfails/requirements.txt @@ -5,7 +5,7 @@ termcolor==2.3.0 certifi==2023.7.22 charset-normalizer==3.2.0 idna==3.4 -pip==23.2.1 +pip==23.3 python-gitlab==3.15.0 requests==2.31.0 requests-toolbelt==1.0.0 @@ -13,5 +13,5 @@ ruamel.yaml==0.17.32 ruamel.yaml.clib==0.2.7 setuptools==68.0.0 tenacity==8.2.3 -urllib3==2.0.4 -wheel==0.41.1 \ No newline at end of file +urllib3==2.0.7 +wheel==0.41.1 -- cgit v1.2.3 From 382561d16854a747e6df71034da08d20d6013dfe Mon Sep 17 00:00:00 2001 From: Samuel Holland Date: Sun, 12 Nov 2023 18:32:45 -0800 Subject: i2c: ocores: Move system PM hooks to the NOIRQ phase When an I2C device contains a wake IRQ subordinate to a regmap-irq chip, the regmap-irq code must be able to perform I2C transactions during suspend_device_irqs() and resume_device_irqs(). Therefore, the bus must be suspended/resumed during the NOIRQ phase. Signed-off-by: Samuel Holland Acked-by: Peter Korsgaard Reviewed-by: Andi Shyti Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-ocores.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/i2c/busses/i2c-ocores.c b/drivers/i2c/busses/i2c-ocores.c index 041a76f71a49..e106af83cef4 100644 --- a/drivers/i2c/busses/i2c-ocores.c +++ b/drivers/i2c/busses/i2c-ocores.c @@ -771,8 +771,8 @@ static int ocores_i2c_resume(struct device *dev) return ocores_init(dev, i2c); } -static DEFINE_SIMPLE_DEV_PM_OPS(ocores_i2c_pm, - ocores_i2c_suspend, ocores_i2c_resume); +static DEFINE_NOIRQ_DEV_PM_OPS(ocores_i2c_pm, + ocores_i2c_suspend, ocores_i2c_resume); static struct platform_driver ocores_i2c_driver = { .probe = ocores_i2c_probe, -- cgit v1.2.3 From 7a1aba89ac54ccf6cad23a91a34c0ab24b1d7997 Mon Sep 17 00:00:00 2001 From: Arkadiusz Kubalewski Date: Fri, 13 Oct 2023 12:25:10 +0200 Subject: ice: dpll: fix initial lock status of dpll When dpll device is registered and dpll subsystem performs notify of a new device, the lock state value provided to dpll subsystem equals 0 which is invalid value for the `enum dpll_lock_status`. Provide correct value by obtaining it from firmware before registering the dpll device. Fixes: d7999f5ea64b ("ice: implement dpll interface to control cgu") Signed-off-by: Aleksandr Loktionov Signed-off-by: Arkadiusz Kubalewski Tested-by: Sunitha Mekala (A Contingent worker at Intel) Signed-off-by: Tony Nguyen --- drivers/net/ethernet/intel/ice/ice_dpll.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/net/ethernet/intel/ice/ice_dpll.c b/drivers/net/ethernet/intel/ice/ice_dpll.c index 835c419ccc74..607f534055b6 100644 --- a/drivers/net/ethernet/intel/ice/ice_dpll.c +++ b/drivers/net/ethernet/intel/ice/ice_dpll.c @@ -1756,6 +1756,7 @@ ice_dpll_init_dpll(struct ice_pf *pf, struct ice_dpll *d, bool cgu, } d->pf = pf; if (cgu) { + ice_dpll_update_state(pf, d, true); ret = dpll_device_register(d->dpll, type, &ice_dpll_ops, d); if (ret) { dpll_device_put(d->dpll); @@ -1796,8 +1797,6 @@ static int ice_dpll_init_worker(struct ice_pf *pf) struct ice_dplls *d = &pf->dplls; struct kthread_worker *kworker; - ice_dpll_update_state(pf, &d->eec, true); - ice_dpll_update_state(pf, &d->pps, true); kthread_init_delayed_work(&d->work, ice_dpll_periodic_work); kworker = kthread_create_worker(0, "ice-dplls-%s", dev_name(ice_pf_to_dev(pf))); -- cgit v1.2.3 From 4a4027f25dc3f39c2aafb3bf8926125c5378c9dc Mon Sep 17 00:00:00 2001 From: Arkadiusz Kubalewski Date: Tue, 31 Oct 2023 18:06:54 +0100 Subject: ice: dpll: fix check for dpll input priority range Supported priority value for input pins may differ with regard of NIC firmware version. E810T NICs with 3.20/4.00 FW versions would accept priority range 0-31, where firmware 4.10+ would support the range 0-9 and extra value of 255. Remove the in-range check as the driver has no information on supported values from the running firmware, let firmware decide if given value is correct and return extack error if the value is not supported. Fixes: d7999f5ea64b ("ice: implement dpll interface to control cgu") Reviewed-by: Przemek Kitszel Reviewed-by: Jacob Keller Signed-off-by: Arkadiusz Kubalewski Tested-by: Sunitha Mekala (A Contingent worker at Intel) Signed-off-by: Tony Nguyen --- drivers/net/ethernet/intel/ice/ice_dpll.c | 6 ------ drivers/net/ethernet/intel/ice/ice_dpll.h | 1 - 2 files changed, 7 deletions(-) diff --git a/drivers/net/ethernet/intel/ice/ice_dpll.c b/drivers/net/ethernet/intel/ice/ice_dpll.c index 607f534055b6..831ba6683962 100644 --- a/drivers/net/ethernet/intel/ice/ice_dpll.c +++ b/drivers/net/ethernet/intel/ice/ice_dpll.c @@ -815,12 +815,6 @@ ice_dpll_input_prio_set(const struct dpll_pin *pin, void *pin_priv, struct ice_pf *pf = d->pf; int ret; - if (prio > ICE_DPLL_PRIO_MAX) { - NL_SET_ERR_MSG_FMT(extack, "prio out of supported range 0-%d", - ICE_DPLL_PRIO_MAX); - return -EINVAL; - } - mutex_lock(&pf->dplls.lock); ret = ice_dpll_hw_input_prio_set(pf, d, p, prio, extack); mutex_unlock(&pf->dplls.lock); diff --git a/drivers/net/ethernet/intel/ice/ice_dpll.h b/drivers/net/ethernet/intel/ice/ice_dpll.h index bb32b6d88373..93172e93995b 100644 --- a/drivers/net/ethernet/intel/ice/ice_dpll.h +++ b/drivers/net/ethernet/intel/ice/ice_dpll.h @@ -6,7 +6,6 @@ #include "ice.h" -#define ICE_DPLL_PRIO_MAX 0xF #define ICE_DPLL_RCLK_NUM_MAX 4 /** ice_dpll_pin - store info about pins -- cgit v1.2.3 From 6db5f2cd9ebb12e930a82c01714a6589576cd50f Mon Sep 17 00:00:00 2001 From: Arkadiusz Kubalewski Date: Tue, 31 Oct 2023 18:08:00 +0100 Subject: ice: dpll: fix output pin capabilities The dpll output pins which are used to feed clock signal of PHY and MAC circuits cannot be disconnected, those integrated circuits require clock signal for operation. By stopping assignment of DPLL_PIN_CAPABILITIES_STATE_CAN_CHANGE pin capability, prevent the user from invoking the state set callback on those pins, setting the state on those pins already returns error, as firmware doesn't allow the change of their state. Fixes: d7999f5ea64b ("ice: implement dpll interface to control cgu") Fixes: 8a3a565ff210 ("ice: add admin commands to access cgu configuration") Reviewed-by: Andrii Staikov Signed-off-by: Arkadiusz Kubalewski Tested-by: Sunitha Mekala (A Contingent worker at Intel) Signed-off-by: Tony Nguyen --- drivers/net/ethernet/intel/ice/ice_dpll.c | 12 ++++--- drivers/net/ethernet/intel/ice/ice_ptp_hw.c | 54 +++++++++++++++++++++++++++++ drivers/net/ethernet/intel/ice/ice_ptp_hw.h | 2 ++ 3 files changed, 64 insertions(+), 4 deletions(-) diff --git a/drivers/net/ethernet/intel/ice/ice_dpll.c b/drivers/net/ethernet/intel/ice/ice_dpll.c index 831ba6683962..86b180cb32a0 100644 --- a/drivers/net/ethernet/intel/ice/ice_dpll.c +++ b/drivers/net/ethernet/intel/ice/ice_dpll.c @@ -1823,6 +1823,7 @@ ice_dpll_init_info_direct_pins(struct ice_pf *pf, int num_pins, i, ret = -EINVAL; struct ice_hw *hw = &pf->hw; struct ice_dpll_pin *pins; + unsigned long caps; u8 freq_supp_num; bool input; @@ -1842,6 +1843,7 @@ ice_dpll_init_info_direct_pins(struct ice_pf *pf, } for (i = 0; i < num_pins; i++) { + caps = 0; pins[i].idx = i; pins[i].prop.board_label = ice_cgu_get_pin_name(hw, i, input); pins[i].prop.type = ice_cgu_get_pin_type(hw, i, input); @@ -1854,8 +1856,8 @@ ice_dpll_init_info_direct_pins(struct ice_pf *pf, &dp->input_prio[i]); if (ret) return ret; - pins[i].prop.capabilities |= - DPLL_PIN_CAPABILITIES_PRIORITY_CAN_CHANGE; + caps |= (DPLL_PIN_CAPABILITIES_PRIORITY_CAN_CHANGE | + DPLL_PIN_CAPABILITIES_STATE_CAN_CHANGE); pins[i].prop.phase_range.min = pf->dplls.input_phase_adj_max; pins[i].prop.phase_range.max = @@ -1865,9 +1867,11 @@ ice_dpll_init_info_direct_pins(struct ice_pf *pf, pf->dplls.output_phase_adj_max; pins[i].prop.phase_range.max = -pf->dplls.output_phase_adj_max; + ret = ice_cgu_get_output_pin_state_caps(hw, i, &caps); + if (ret) + return ret; } - pins[i].prop.capabilities |= - DPLL_PIN_CAPABILITIES_STATE_CAN_CHANGE; + pins[i].prop.capabilities = caps; ret = ice_dpll_pin_state_update(pf, &pins[i], pin_type, NULL); if (ret) return ret; diff --git a/drivers/net/ethernet/intel/ice/ice_ptp_hw.c b/drivers/net/ethernet/intel/ice/ice_ptp_hw.c index 6d573908de7a..a00b55e14aac 100644 --- a/drivers/net/ethernet/intel/ice/ice_ptp_hw.c +++ b/drivers/net/ethernet/intel/ice/ice_ptp_hw.c @@ -3961,3 +3961,57 @@ int ice_get_cgu_rclk_pin_info(struct ice_hw *hw, u8 *base_idx, u8 *pin_num) return ret; } + +/** + * ice_cgu_get_output_pin_state_caps - get output pin state capabilities + * @hw: pointer to the hw struct + * @pin_id: id of a pin + * @caps: capabilities to modify + * + * Return: + * * 0 - success, state capabilities were modified + * * negative - failure, capabilities were not modified + */ +int ice_cgu_get_output_pin_state_caps(struct ice_hw *hw, u8 pin_id, + unsigned long *caps) +{ + bool can_change = true; + + switch (hw->device_id) { + case ICE_DEV_ID_E810C_SFP: + if (pin_id == ZL_OUT2 || pin_id == ZL_OUT3) + can_change = false; + break; + case ICE_DEV_ID_E810C_QSFP: + if (pin_id == ZL_OUT2 || pin_id == ZL_OUT3 || pin_id == ZL_OUT4) + can_change = false; + break; + case ICE_DEV_ID_E823L_10G_BASE_T: + case ICE_DEV_ID_E823L_1GBE: + case ICE_DEV_ID_E823L_BACKPLANE: + case ICE_DEV_ID_E823L_QSFP: + case ICE_DEV_ID_E823L_SFP: + case ICE_DEV_ID_E823C_10G_BASE_T: + case ICE_DEV_ID_E823C_BACKPLANE: + case ICE_DEV_ID_E823C_QSFP: + case ICE_DEV_ID_E823C_SFP: + case ICE_DEV_ID_E823C_SGMII: + if (hw->cgu_part_number == + ICE_AQC_GET_LINK_TOPO_NODE_NR_ZL30632_80032 && + pin_id == ZL_OUT2) + can_change = false; + else if (hw->cgu_part_number == + ICE_AQC_GET_LINK_TOPO_NODE_NR_SI5383_5384 && + pin_id == SI_OUT1) + can_change = false; + break; + default: + return -EINVAL; + } + if (can_change) + *caps |= DPLL_PIN_CAPABILITIES_STATE_CAN_CHANGE; + else + *caps &= ~DPLL_PIN_CAPABILITIES_STATE_CAN_CHANGE; + + return 0; +} diff --git a/drivers/net/ethernet/intel/ice/ice_ptp_hw.h b/drivers/net/ethernet/intel/ice/ice_ptp_hw.h index 36aeeef99ec0..cf76701566c7 100644 --- a/drivers/net/ethernet/intel/ice/ice_ptp_hw.h +++ b/drivers/net/ethernet/intel/ice/ice_ptp_hw.h @@ -282,6 +282,8 @@ int ice_get_cgu_state(struct ice_hw *hw, u8 dpll_idx, int ice_get_cgu_rclk_pin_info(struct ice_hw *hw, u8 *base_idx, u8 *pin_num); void ice_ptp_init_phy_model(struct ice_hw *hw); +int ice_cgu_get_output_pin_state_caps(struct ice_hw *hw, u8 pin_id, + unsigned long *caps); #define PFTSYN_SEM_BYTES 4 -- cgit v1.2.3 From a778616e4cc2d5e3a253c7d8959aafa5218fc5e4 Mon Sep 17 00:00:00 2001 From: Dan Nowlin Date: Tue, 7 Nov 2023 12:32:27 -0500 Subject: ice: fix DDP package download for packages without signature segment Commit 3cbdb0343022 ("ice: Add support for E830 DDP package segment") incorrectly removed support for package download for packages without a signature segment. These packages include the signature buffer inline in the configurations buffers, and not in a signature segment. Fix package download by providing download support for both packages with (ice_download_pkg_with_sig_seg()) and without signature segment (ice_download_pkg_without_sig_seg()). Fixes: 3cbdb0343022 ("ice: Add support for E830 DDP package segment") Reported-by: Maciej Fijalkowski Closes: https://lore.kernel.org/netdev/ZUT50a94kk2pMGKb@boxer/ Tested-by: Maciej Fijalkowski Reviewed-by: Wojciech Drewek Reviewed-by: Jacob Keller Signed-off-by: Dan Nowlin Signed-off-by: Paul Greenwalt Reviewed-by: Simon Horman Tested-by: Arpana Arland (A Contingent worker at Intel) Signed-off-by: Tony Nguyen --- drivers/net/ethernet/intel/ice/ice_ddp.c | 103 ++++++++++++++++++++++++++++++- 1 file changed, 100 insertions(+), 3 deletions(-) diff --git a/drivers/net/ethernet/intel/ice/ice_ddp.c b/drivers/net/ethernet/intel/ice/ice_ddp.c index cfb1580f5850..8b7504a9df31 100644 --- a/drivers/net/ethernet/intel/ice/ice_ddp.c +++ b/drivers/net/ethernet/intel/ice/ice_ddp.c @@ -1479,14 +1479,14 @@ ice_post_dwnld_pkg_actions(struct ice_hw *hw) } /** - * ice_download_pkg + * ice_download_pkg_with_sig_seg * @hw: pointer to the hardware structure * @pkg_hdr: pointer to package header * * Handles the download of a complete package. */ static enum ice_ddp_state -ice_download_pkg(struct ice_hw *hw, struct ice_pkg_hdr *pkg_hdr) +ice_download_pkg_with_sig_seg(struct ice_hw *hw, struct ice_pkg_hdr *pkg_hdr) { enum ice_aq_err aq_err = hw->adminq.sq_last_status; enum ice_ddp_state state = ICE_DDP_PKG_ERR; @@ -1519,6 +1519,103 @@ ice_download_pkg(struct ice_hw *hw, struct ice_pkg_hdr *pkg_hdr) state = ice_post_dwnld_pkg_actions(hw); ice_release_global_cfg_lock(hw); + + return state; +} + +/** + * ice_dwnld_cfg_bufs + * @hw: pointer to the hardware structure + * @bufs: pointer to an array of buffers + * @count: the number of buffers in the array + * + * Obtains global config lock and downloads the package configuration buffers + * to the firmware. + */ +static enum ice_ddp_state +ice_dwnld_cfg_bufs(struct ice_hw *hw, struct ice_buf *bufs, u32 count) +{ + enum ice_ddp_state state; + struct ice_buf_hdr *bh; + int status; + + if (!bufs || !count) + return ICE_DDP_PKG_ERR; + + /* If the first buffer's first section has its metadata bit set + * then there are no buffers to be downloaded, and the operation is + * considered a success. + */ + bh = (struct ice_buf_hdr *)bufs; + if (le32_to_cpu(bh->section_entry[0].type) & ICE_METADATA_BUF) + return ICE_DDP_PKG_SUCCESS; + + status = ice_acquire_global_cfg_lock(hw, ICE_RES_WRITE); + if (status) { + if (status == -EALREADY) + return ICE_DDP_PKG_ALREADY_LOADED; + return ice_map_aq_err_to_ddp_state(hw->adminq.sq_last_status); + } + + state = ice_dwnld_cfg_bufs_no_lock(hw, bufs, 0, count, true); + if (!state) + state = ice_post_dwnld_pkg_actions(hw); + + ice_release_global_cfg_lock(hw); + + return state; +} + +/** + * ice_download_pkg_without_sig_seg + * @hw: pointer to the hardware structure + * @ice_seg: pointer to the segment of the package to be downloaded + * + * Handles the download of a complete package without signature segment. + */ +static enum ice_ddp_state +ice_download_pkg_without_sig_seg(struct ice_hw *hw, struct ice_seg *ice_seg) +{ + struct ice_buf_table *ice_buf_tbl; + + ice_debug(hw, ICE_DBG_PKG, "Segment format version: %d.%d.%d.%d\n", + ice_seg->hdr.seg_format_ver.major, + ice_seg->hdr.seg_format_ver.minor, + ice_seg->hdr.seg_format_ver.update, + ice_seg->hdr.seg_format_ver.draft); + + ice_debug(hw, ICE_DBG_PKG, "Seg: type 0x%X, size %d, name %s\n", + le32_to_cpu(ice_seg->hdr.seg_type), + le32_to_cpu(ice_seg->hdr.seg_size), ice_seg->hdr.seg_id); + + ice_buf_tbl = ice_find_buf_table(ice_seg); + + ice_debug(hw, ICE_DBG_PKG, "Seg buf count: %d\n", + le32_to_cpu(ice_buf_tbl->buf_count)); + + return ice_dwnld_cfg_bufs(hw, ice_buf_tbl->buf_array, + le32_to_cpu(ice_buf_tbl->buf_count)); +} + +/** + * ice_download_pkg + * @hw: pointer to the hardware structure + * @pkg_hdr: pointer to package header + * @ice_seg: pointer to the segment of the package to be downloaded + * + * Handles the download of a complete package. + */ +static enum ice_ddp_state +ice_download_pkg(struct ice_hw *hw, struct ice_pkg_hdr *pkg_hdr, + struct ice_seg *ice_seg) +{ + enum ice_ddp_state state; + + if (hw->pkg_has_signing_seg) + state = ice_download_pkg_with_sig_seg(hw, pkg_hdr); + else + state = ice_download_pkg_without_sig_seg(hw, ice_seg); + ice_post_pkg_dwnld_vlan_mode_cfg(hw); return state; @@ -2083,7 +2180,7 @@ enum ice_ddp_state ice_init_pkg(struct ice_hw *hw, u8 *buf, u32 len) /* initialize package hints and then download package */ ice_init_pkg_hints(hw, seg); - state = ice_download_pkg(hw, pkg); + state = ice_download_pkg(hw, pkg, seg); if (state == ICE_DDP_PKG_ALREADY_LOADED) { ice_debug(hw, ICE_DBG_INIT, "package previously loaded - no work.\n"); -- cgit v1.2.3 From 37e6fd0cebf0b9f71afb38fd95b10408799d1f0b Mon Sep 17 00:00:00 2001 From: Charles Keepax Date: Mon, 13 Nov 2023 15:59:16 +0000 Subject: ASoC: wm8974: Correct boost mixer inputs Bit 6 of INPPGA (INPPGAMUTE) does not control the Aux path, it controls the input PGA path, as can been seen from Figure 8 Input Boost Stage in the datasheet. Update the naming of things in the driver to match this and update the routing to also reflect this. Signed-off-by: Charles Keepax Link: https://lore.kernel.org/r/20231113155916.1741027-1-ckeepax@opensource.cirrus.com Signed-off-by: Mark Brown --- sound/soc/codecs/wm8974.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/sound/soc/codecs/wm8974.c b/sound/soc/codecs/wm8974.c index 044b6f604c09..260bac695b20 100644 --- a/sound/soc/codecs/wm8974.c +++ b/sound/soc/codecs/wm8974.c @@ -186,7 +186,7 @@ SOC_DAPM_SINGLE("PCM Playback Switch", WM8974_MONOMIX, 0, 1, 0), /* Boost mixer */ static const struct snd_kcontrol_new wm8974_boost_mixer[] = { -SOC_DAPM_SINGLE("Aux Switch", WM8974_INPPGA, 6, 1, 1), +SOC_DAPM_SINGLE("PGA Switch", WM8974_INPPGA, 6, 1, 1), }; /* Input PGA */ @@ -246,8 +246,8 @@ static const struct snd_soc_dapm_route wm8974_dapm_routes[] = { /* Boost Mixer */ {"ADC", NULL, "Boost Mixer"}, - {"Boost Mixer", "Aux Switch", "Aux Input"}, - {"Boost Mixer", NULL, "Input PGA"}, + {"Boost Mixer", NULL, "Aux Input"}, + {"Boost Mixer", "PGA Switch", "Input PGA"}, {"Boost Mixer", NULL, "MICP"}, /* Input PGA */ -- cgit v1.2.3 From ff31ba19d732efb9aca3633935d71085e68d5076 Mon Sep 17 00:00:00 2001 From: Anastasia Belova Date: Mon, 13 Nov 2023 17:52:32 +0300 Subject: cifs: spnego: add ';' in HOST_KEY_LEN "host=" should start with ';' (as in cifs_get_spnego_key) So its length should be 6. Found by Linux Verification Center (linuxtesting.org) with SVACE. Reviewed-by: Paulo Alcantara (SUSE) Fixes: 7c9c3760b3a5 ("[CIFS] add constants for string lengths of keynames in SPNEGO upcall string") Signed-off-by: Anastasia Belova Co-developed-by: Ekaterina Esina Signed-off-by: Ekaterina Esina Signed-off-by: Steve French --- fs/smb/client/cifs_spnego.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/smb/client/cifs_spnego.c b/fs/smb/client/cifs_spnego.c index 6f3285f1dfee..af7849e5974f 100644 --- a/fs/smb/client/cifs_spnego.c +++ b/fs/smb/client/cifs_spnego.c @@ -64,8 +64,8 @@ struct key_type cifs_spnego_key_type = { * strlen(";sec=ntlmsspi") */ #define MAX_MECH_STR_LEN 13 -/* strlen of "host=" */ -#define HOST_KEY_LEN 5 +/* strlen of ";host=" */ +#define HOST_KEY_LEN 6 /* strlen of ";ip4=" or ";ip6=" */ #define IP_KEY_LEN 5 -- cgit v1.2.3 From 181724fc72486dec2bec8803459be05b5162aaa8 Mon Sep 17 00:00:00 2001 From: Ekaterina Esina Date: Mon, 13 Nov 2023 19:42:41 +0300 Subject: cifs: fix check of rc in function generate_smb3signingkey Remove extra check after condition, add check after generating key for encryption. The check is needed to return non zero rc before rewriting it with generating key for decryption. Found by Linux Verification Center (linuxtesting.org) with SVACE. Reviewed-by: Paulo Alcantara (SUSE) Fixes: d70e9fa55884 ("cifs: try opening channels after mounting") Signed-off-by: Ekaterina Esina Co-developed-by: Anastasia Belova Signed-off-by: Anastasia Belova Signed-off-by: Steve French --- fs/smb/client/smb2transport.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/fs/smb/client/smb2transport.c b/fs/smb/client/smb2transport.c index 84ea67301303..5a3ca62d2f07 100644 --- a/fs/smb/client/smb2transport.c +++ b/fs/smb/client/smb2transport.c @@ -458,6 +458,8 @@ generate_smb3signingkey(struct cifs_ses *ses, ptriplet->encryption.context, ses->smb3encryptionkey, SMB3_ENC_DEC_KEY_SIZE); + if (rc) + return rc; rc = generate_key(ses, ptriplet->decryption.label, ptriplet->decryption.context, ses->smb3decryptionkey, @@ -466,9 +468,6 @@ generate_smb3signingkey(struct cifs_ses *ses, return rc; } - if (rc) - return rc; - #ifdef CONFIG_CIFS_DEBUG_DUMP_KEYS cifs_dbg(VFS, "%s: dumping generated AES session keys\n", __func__); /* -- cgit v1.2.3 From 48d584b7f90f48d2623fb01743b099efbf0d36c2 Mon Sep 17 00:00:00 2001 From: Jiapeng Chong Date: Mon, 6 Nov 2023 10:34:01 +0800 Subject: bcachefs: make bch2_target_to_text_sb static MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The bch2_target_to_text_sb are not used outside the file disk_groups.c, so the modification is defined as static. fs/bcachefs/disk_groups.c:583:6: warning: no previous prototype for ‘bch2_target_to_text_sb’. Reported-by: Abaci Robot Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=7144 Signed-off-by: Jiapeng Chong Signed-off-by: Kent Overstreet --- fs/bcachefs/disk_groups.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/bcachefs/disk_groups.c b/fs/bcachefs/disk_groups.c index d613695abf9f..1f334124055b 100644 --- a/fs/bcachefs/disk_groups.c +++ b/fs/bcachefs/disk_groups.c @@ -580,7 +580,7 @@ void bch2_target_to_text(struct printbuf *out, struct bch_fs *c, unsigned v) } } -void bch2_target_to_text_sb(struct printbuf *out, struct bch_sb *sb, unsigned v) +static void bch2_target_to_text_sb(struct printbuf *out, struct bch_sb *sb, unsigned v) { struct target t = target_decode(v); -- cgit v1.2.3 From c4f1f80a0e8d829ce4e29ca52cb7f74b22f67454 Mon Sep 17 00:00:00 2001 From: Kent Overstreet Date: Sat, 11 Nov 2023 12:30:19 -0500 Subject: bcachefs: Use correct fgf_t type as function argument This quiets a sparse complaint. Signed-off-by: Kent Overstreet --- fs/bcachefs/fs-io-pagecache.c | 2 +- fs/bcachefs/fs-io-pagecache.h | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/bcachefs/fs-io-pagecache.c b/fs/bcachefs/fs-io-pagecache.c index 8bd9bcdd27f7..ff664fd0d8ef 100644 --- a/fs/bcachefs/fs-io-pagecache.c +++ b/fs/bcachefs/fs-io-pagecache.c @@ -13,7 +13,7 @@ int bch2_filemap_get_contig_folios_d(struct address_space *mapping, loff_t start, u64 end, - int fgp_flags, gfp_t gfp, + fgf_t fgp_flags, gfp_t gfp, folios *fs) { struct folio *f; diff --git a/fs/bcachefs/fs-io-pagecache.h b/fs/bcachefs/fs-io-pagecache.h index a2222ad586e9..27f712ae37a6 100644 --- a/fs/bcachefs/fs-io-pagecache.h +++ b/fs/bcachefs/fs-io-pagecache.h @@ -7,7 +7,7 @@ typedef DARRAY(struct folio *) folios; int bch2_filemap_get_contig_folios_d(struct address_space *, loff_t, - u64, int, gfp_t, folios *); + u64, fgf_t, gfp_t, folios *); int bch2_write_invalidate_inode_pages_range(struct address_space *, loff_t, loff_t); /* -- cgit v1.2.3 From 1b8bc556280d3f4970407480e6a5ff49efe5601b Mon Sep 17 00:00:00 2001 From: "Gustavo A. R. Silva" Date: Mon, 6 Nov 2023 16:27:02 -0600 Subject: bcachefs: Use DECLARE_FLEX_ARRAY() helper and fix multiple -Warray-bounds warnings Transform zero-length array `s` into a proper flexible-array member in `struct snapshot_table` via the DECLARE_FLEX_ARRAY() helper; and fix tons of the following -Warray-bounds warnings: fs/bcachefs/snapshot.h:36:21: warning: array subscript is outside array bounds of 'struct snapshot_t[0]' [-Warray-bounds=] fs/bcachefs/snapshot.h:36:21: warning: array subscript is outside array bounds of 'struct snapshot_t[0]' [-Warray-bounds=] fs/bcachefs/snapshot.c:135:70: warning: array subscript is outside array bounds of 'struct snapshot_t[0]' [-Warray-bounds=] fs/bcachefs/snapshot.h:36:21: warning: array subscript is outside array bounds of 'struct snapshot_t[0]' [-Warray-bounds=] fs/bcachefs/snapshot.h:36:21: warning: array subscript is outside array bounds of 'struct snapshot_t[0]' [-Warray-bounds=] fs/bcachefs/snapshot.h:36:21: warning: array subscript is outside array bounds of 'struct snapshot_t[0]' [-Warray-bounds=] This helps with the ongoing efforts to globally enable -Warray-bounds. Signed-off-by: Gustavo A. R. Silva Signed-off-by: Kent Overstreet --- fs/bcachefs/subvolume_types.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/bcachefs/subvolume_types.h b/fs/bcachefs/subvolume_types.h index 86833445af20..2d2e66a4e468 100644 --- a/fs/bcachefs/subvolume_types.h +++ b/fs/bcachefs/subvolume_types.h @@ -20,7 +20,7 @@ struct snapshot_t { }; struct snapshot_table { - struct snapshot_t s[0]; + DECLARE_FLEX_ARRAY(struct snapshot_t, s); }; typedef struct { -- cgit v1.2.3 From 274c2f8fd27158d15524abe63c3df6fb96707dd3 Mon Sep 17 00:00:00 2001 From: "Gustavo A. R. Silva" Date: Mon, 6 Nov 2023 15:40:22 -0600 Subject: bcachefs: Fix multiple -Warray-bounds warnings Transform zero-length array `entries` into a proper flexible-array member in `struct journal_seq_blacklist_table`; and fix the following -Warray-bounds warnings: fs/bcachefs/journal_seq_blacklist.c:148:26: warning: array subscript idx is outside array bounds of 'struct journal_seq_blacklist_table_entry[0]' [-Warray-bounds=] fs/bcachefs/journal_seq_blacklist.c:150:30: warning: array subscript idx is outside array bounds of 'struct journal_seq_blacklist_table_entry[0]' [-Warray-bounds=] fs/bcachefs/journal_seq_blacklist.c:154:27: warning: array subscript idx is outside array bounds of 'struct journal_seq_blacklist_table_entry[0]' [-Warray-bounds=] fs/bcachefs/journal_seq_blacklist.c:176:27: warning: array subscript i is outside array bounds of 'struct journal_seq_blacklist_table_entry[0]' [-Warray-bounds=] fs/bcachefs/journal_seq_blacklist.c:177:27: warning: array subscript i is outside array bounds of 'struct journal_seq_blacklist_table_entry[0]' [-Warray-bounds=] fs/bcachefs/journal_seq_blacklist.c:297:34: warning: array subscript i is outside array bounds of 'struct journal_seq_blacklist_table_entry[0]' [-Warray-bounds=] fs/bcachefs/journal_seq_blacklist.c:298:34: warning: array subscript i is outside array bounds of 'struct journal_seq_blacklist_table_entry[0]' [-Warray-bounds=] fs/bcachefs/journal_seq_blacklist.c:300:31: warning: array subscript i is outside array bounds of 'struct journal_seq_blacklist_table_entry[0]' [-Warray-bounds=] This results in no differences in binary output. This helps with the ongoing efforts to globally enable -Warray-bounds. Signed-off-by: Gustavo A. R. Silva Signed-off-by: Kent Overstreet --- fs/bcachefs/bcachefs.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/bcachefs/bcachefs.h b/fs/bcachefs/bcachefs.h index 9cb8684959ee..403aa3389fcc 100644 --- a/fs/bcachefs/bcachefs.h +++ b/fs/bcachefs/bcachefs.h @@ -617,7 +617,7 @@ struct journal_seq_blacklist_table { u64 start; u64 end; bool dirty; - } entries[0]; + } entries[]; }; struct journal_keys { -- cgit v1.2.3 From 03cc1e67a243cbb2c85d5fd84f369449f94d4269 Mon Sep 17 00:00:00 2001 From: Kent Overstreet Date: Tue, 7 Nov 2023 10:30:22 -0500 Subject: bcachefs: Fix null ptr deref in bch2_backpointer_get_node() bch2_btree_iter_peek_node() can return a NULL ptr (when the tree is shorter than the search depth); handle this with an early return. Signed-off-by: Kent Overstreet Reported-by: Dan Carpenter Fixes: https://lore.kernel.org/linux-bcachefs/5fc3c28b-c232-4ec7-b0ac-4ef220ddf976@moroto.mountain/T/ Signed-off-by: Kent Overstreet --- fs/bcachefs/backpointers.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/fs/bcachefs/backpointers.c b/fs/bcachefs/backpointers.c index ef02c9bb0354..23c0834a97a4 100644 --- a/fs/bcachefs/backpointers.c +++ b/fs/bcachefs/backpointers.c @@ -313,17 +313,17 @@ struct btree *bch2_backpointer_get_node(struct btree_trans *trans, bp.level - 1, 0); b = bch2_btree_iter_peek_node(iter); - if (IS_ERR(b)) + if (IS_ERR_OR_NULL(b)) goto err; BUG_ON(b->c.level != bp.level - 1); - if (b && extent_matches_bp(c, bp.btree_id, bp.level, - bkey_i_to_s_c(&b->key), - bucket, bp)) + if (extent_matches_bp(c, bp.btree_id, bp.level, + bkey_i_to_s_c(&b->key), + bucket, bp)) return b; - if (b && btree_node_will_make_reachable(b)) { + if (btree_node_will_make_reachable(b)) { b = ERR_PTR(-BCH_ERR_backpointer_to_overwritten_btree_node); } else { backpointer_not_found(trans, bp_pos, bp, bkey_i_to_s_c(&b->key)); -- cgit v1.2.3 From 4d6128dca6d940015fe2aa383ec1a0eeb9632f08 Mon Sep 17 00:00:00 2001 From: Kent Overstreet Date: Mon, 6 Nov 2023 11:59:05 -0500 Subject: bcachefs: Guard against insufficient devices to create stripes We can't create stripes if we don't have enough devices - this manifested as an integer underflow bug later. Signed-off-by: Kent Overstreet --- fs/bcachefs/ec.c | 16 ++++++++++++++-- 1 file changed, 14 insertions(+), 2 deletions(-) diff --git a/fs/bcachefs/ec.c b/fs/bcachefs/ec.c index 875f7c5a6fca..2a77de18c004 100644 --- a/fs/bcachefs/ec.c +++ b/fs/bcachefs/ec.c @@ -1373,6 +1373,15 @@ ec_new_stripe_head_alloc(struct bch_fs *c, unsigned target, h->nr_active_devs++; rcu_read_unlock(); + + /* + * If we only have redundancy + 1 devices, we're better off with just + * replication: + */ + if (h->nr_active_devs < h->redundancy + 2) + bch_err(c, "insufficient devices available to create stripe (have %u, need %u) - mismatched bucket sizes?", + h->nr_active_devs, h->redundancy + 2); + list_add(&h->list, &c->ec_stripe_head_list); return h; } @@ -1424,6 +1433,11 @@ __bch2_ec_stripe_head_get(struct btree_trans *trans, h = ec_new_stripe_head_alloc(c, target, algo, redundancy, watermark); found: + if (!IS_ERR_OR_NULL(h) && + h->nr_active_devs < h->redundancy + 2) { + mutex_unlock(&h->lock); + h = NULL; + } mutex_unlock(&c->ec_stripe_head_lock); return h; } @@ -1681,8 +1695,6 @@ struct ec_stripe_head *bch2_ec_stripe_head_get(struct btree_trans *trans, int ret; h = __bch2_ec_stripe_head_get(trans, target, algo, redundancy, watermark); - if (!h) - bch_err(c, "no stripe head"); if (IS_ERR_OR_NULL(h)) return h; -- cgit v1.2.3 From 1bd5bcc9f5eef968ed021d72b14a157be7abdb49 Mon Sep 17 00:00:00 2001 From: Kent Overstreet Date: Mon, 13 Nov 2023 21:44:14 -0500 Subject: bcachefs: Split out btree_key_cache_types.h More consistent organization. Signed-off-by: Kent Overstreet --- fs/bcachefs/btree_key_cache_types.h | 30 ++++++++++++++++++++++++++++++ fs/bcachefs/btree_types.h | 27 +-------------------------- 2 files changed, 31 insertions(+), 26 deletions(-) create mode 100644 fs/bcachefs/btree_key_cache_types.h diff --git a/fs/bcachefs/btree_key_cache_types.h b/fs/bcachefs/btree_key_cache_types.h new file mode 100644 index 000000000000..0f967808d766 --- /dev/null +++ b/fs/bcachefs/btree_key_cache_types.h @@ -0,0 +1,30 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _BCACHEFS_BTREE_KEY_CACHE_TYPES_H +#define _BCACHEFS_BTREE_KEY_CACHE_TYPES_H + +struct btree_key_cache_freelist { + struct bkey_cached *objs[16]; + unsigned nr; +}; + +struct btree_key_cache { + struct mutex lock; + struct rhashtable table; + bool table_init_done; + struct list_head freed_pcpu; + struct list_head freed_nonpcpu; + struct shrinker *shrink; + unsigned shrink_iter; + struct btree_key_cache_freelist __percpu *pcpu_freed; + + atomic_long_t nr_freed; + atomic_long_t nr_keys; + atomic_long_t nr_dirty; +}; + +struct bkey_cached_key { + u32 btree_id; + struct bpos pos; +} __packed __aligned(4); + +#endif /* _BCACHEFS_BTREE_KEY_CACHE_TYPES_H */ diff --git a/fs/bcachefs/btree_types.h b/fs/bcachefs/btree_types.h index 941841a0c5bf..be5d6027e796 100644 --- a/fs/bcachefs/btree_types.h +++ b/fs/bcachefs/btree_types.h @@ -5,7 +5,7 @@ #include #include -//#include "bkey_methods.h" +#include "btree_key_cache_types.h" #include "buckets_types.h" #include "darray.h" #include "errcode.h" @@ -312,31 +312,6 @@ struct btree_iter { #endif }; -struct btree_key_cache_freelist { - struct bkey_cached *objs[16]; - unsigned nr; -}; - -struct btree_key_cache { - struct mutex lock; - struct rhashtable table; - bool table_init_done; - struct list_head freed_pcpu; - struct list_head freed_nonpcpu; - struct shrinker *shrink; - unsigned shrink_iter; - struct btree_key_cache_freelist __percpu *pcpu_freed; - - atomic_long_t nr_freed; - atomic_long_t nr_keys; - atomic_long_t nr_dirty; -}; - -struct bkey_cached_key { - u32 btree_id; - struct bpos pos; -} __packed __aligned(4); - #define BKEY_CACHED_ACCESSED 0 #define BKEY_CACHED_DIRTY 1 -- cgit v1.2.3 From c65c13f0eac61218c9ee4635c05661c0b9760e58 Mon Sep 17 00:00:00 2001 From: Kent Overstreet Date: Mon, 6 Nov 2023 09:53:14 -0500 Subject: bcachefs: Run btree key cache shrinker less aggressively The btree key cache maintains lists of items that have been freed, but can't yet be reclaimed because a bch2_trans_relock() call might find them - we're waiting for SRCU readers to release. Previously, we wouldn't count these items against the number we're attempting to scan for, which would mean we'd evict more live key cache entries - doing quite a bit of potentially unecessary work. With recent work to make sure we don't hold SRCU locks for too long, it should be safe to count all the items on the freelists against number to scan - even if we can't reclaim them yet, we will be able to soon. Signed-off-by: Kent Overstreet --- fs/bcachefs/btree_key_cache.c | 23 +++++++++++++++++++---- fs/bcachefs/btree_key_cache_types.h | 4 ++++ 2 files changed, 23 insertions(+), 4 deletions(-) diff --git a/fs/bcachefs/btree_key_cache.c b/fs/bcachefs/btree_key_cache.c index 9b78f78a75b5..b3305a04d808 100644 --- a/fs/bcachefs/btree_key_cache.c +++ b/fs/bcachefs/btree_key_cache.c @@ -89,10 +89,13 @@ static void bkey_cached_free(struct btree_key_cache *bc, ck->btree_trans_barrier_seq = start_poll_synchronize_srcu(&c->btree_trans_barrier); - if (ck->c.lock.readers) + if (ck->c.lock.readers) { list_move_tail(&ck->list, &bc->freed_pcpu); - else + bc->nr_freed_pcpu++; + } else { list_move_tail(&ck->list, &bc->freed_nonpcpu); + bc->nr_freed_nonpcpu++; + } atomic_long_inc(&bc->nr_freed); kfree(ck->k); @@ -109,6 +112,8 @@ static void __bkey_cached_move_to_freelist_ordered(struct btree_key_cache *bc, { struct bkey_cached *pos; + bc->nr_freed_nonpcpu++; + list_for_each_entry_reverse(pos, &bc->freed_nonpcpu, list) { if (ULONG_CMP_GE(ck->btree_trans_barrier_seq, pos->btree_trans_barrier_seq)) { @@ -158,6 +163,7 @@ static void bkey_cached_move_to_freelist(struct btree_key_cache *bc, #else mutex_lock(&bc->lock); list_move_tail(&ck->list, &bc->freed_nonpcpu); + bc->nr_freed_nonpcpu++; mutex_unlock(&bc->lock); #endif } else { @@ -217,6 +223,7 @@ bkey_cached_alloc(struct btree_trans *trans, struct btree_path *path, f->nr < ARRAY_SIZE(f->objs) / 2) { ck = list_last_entry(&bc->freed_nonpcpu, struct bkey_cached, list); list_del_init(&ck->list); + bc->nr_freed_nonpcpu--; f->objs[f->nr++] = ck; } @@ -229,6 +236,7 @@ bkey_cached_alloc(struct btree_trans *trans, struct btree_path *path, if (!list_empty(&bc->freed_nonpcpu)) { ck = list_last_entry(&bc->freed_nonpcpu, struct bkey_cached, list); list_del_init(&ck->list); + bc->nr_freed_nonpcpu--; } mutex_unlock(&bc->lock); #endif @@ -850,6 +858,8 @@ static unsigned long bch2_btree_key_cache_scan(struct shrinker *shrink, * Newest freed entries are at the end of the list - once we hit one * that's too new to be freed, we can bail out: */ + scanned += bc->nr_freed_nonpcpu; + list_for_each_entry_safe(ck, t, &bc->freed_nonpcpu, list) { if (!poll_state_synchronize_srcu(&c->btree_trans_barrier, ck->btree_trans_barrier_seq)) @@ -859,13 +869,15 @@ static unsigned long bch2_btree_key_cache_scan(struct shrinker *shrink, six_lock_exit(&ck->c.lock); kmem_cache_free(bch2_key_cache, ck); atomic_long_dec(&bc->nr_freed); - scanned++; freed++; + bc->nr_freed_nonpcpu--; } if (scanned >= nr) goto out; + scanned += bc->nr_freed_pcpu; + list_for_each_entry_safe(ck, t, &bc->freed_pcpu, list) { if (!poll_state_synchronize_srcu(&c->btree_trans_barrier, ck->btree_trans_barrier_seq)) @@ -875,8 +887,8 @@ static unsigned long bch2_btree_key_cache_scan(struct shrinker *shrink, six_lock_exit(&ck->c.lock); kmem_cache_free(bch2_key_cache, ck); atomic_long_dec(&bc->nr_freed); - scanned++; freed++; + bc->nr_freed_pcpu--; } if (scanned >= nr) @@ -982,6 +994,9 @@ void bch2_fs_btree_key_cache_exit(struct btree_key_cache *bc) } #endif + BUG_ON(list_count_nodes(&bc->freed_pcpu) != bc->nr_freed_pcpu); + BUG_ON(list_count_nodes(&bc->freed_nonpcpu) != bc->nr_freed_nonpcpu); + list_splice(&bc->freed_pcpu, &items); list_splice(&bc->freed_nonpcpu, &items); diff --git a/fs/bcachefs/btree_key_cache_types.h b/fs/bcachefs/btree_key_cache_types.h index 0f967808d766..290e4e57df5b 100644 --- a/fs/bcachefs/btree_key_cache_types.h +++ b/fs/bcachefs/btree_key_cache_types.h @@ -11,8 +11,12 @@ struct btree_key_cache { struct mutex lock; struct rhashtable table; bool table_init_done; + struct list_head freed_pcpu; + size_t nr_freed_pcpu; struct list_head freed_nonpcpu; + size_t nr_freed_nonpcpu; + struct shrinker *shrink; unsigned shrink_iter; struct btree_key_cache_freelist __percpu *pcpu_freed; -- cgit v1.2.3 From 3b8c4507779691984e31e64e0b80abb03cc02d0d Mon Sep 17 00:00:00 2001 From: Kent Overstreet Date: Mon, 6 Nov 2023 19:49:47 -0500 Subject: bcachefs: btree_trans->write_locked As prep work for the next patch to fix a key cache reclaim issue, we need to start tracking whether we're currently holding write locks - so that we can release and retake the before calling into memory reclaim. Signed-off-by: Kent Overstreet --- fs/bcachefs/btree_trans_commit.c | 85 +++++++++++++++++++++++----------------- fs/bcachefs/btree_types.h | 1 + 2 files changed, 50 insertions(+), 36 deletions(-) diff --git a/fs/bcachefs/btree_trans_commit.c b/fs/bcachefs/btree_trans_commit.c index decad7b66c59..02491f7bb831 100644 --- a/fs/bcachefs/btree_trans_commit.c +++ b/fs/bcachefs/btree_trans_commit.c @@ -78,6 +78,53 @@ inline void bch2_btree_node_prep_for_write(struct btree_trans *trans, bch2_btree_init_next(trans, b); } +static noinline int trans_lock_write_fail(struct btree_trans *trans, struct btree_insert_entry *i) +{ + while (--i >= trans->updates) { + if (same_leaf_as_prev(trans, i)) + continue; + + bch2_btree_node_unlock_write(trans, i->path, insert_l(i)->b); + } + + trace_and_count(trans->c, trans_restart_would_deadlock_write, trans); + return btree_trans_restart(trans, BCH_ERR_transaction_restart_would_deadlock_write); +} + +static inline int bch2_trans_lock_write(struct btree_trans *trans) +{ + struct btree_insert_entry *i; + + EBUG_ON(trans->write_locked); + + trans_for_each_update(trans, i) { + if (same_leaf_as_prev(trans, i)) + continue; + + if (bch2_btree_node_lock_write(trans, i->path, &insert_l(i)->b->c)) + return trans_lock_write_fail(trans, i); + + if (!i->cached) + bch2_btree_node_prep_for_write(trans, i->path, insert_l(i)->b); + } + + trans->write_locked = true; + return 0; +} + +static inline void bch2_trans_unlock_write(struct btree_trans *trans) +{ + if (likely(trans->write_locked)) { + struct btree_insert_entry *i; + + trans_for_each_update(trans, i) + if (!same_leaf_as_prev(trans, i)) + bch2_btree_node_unlock_write_inlined(trans, i->path, + insert_l(i)->b); + trans->write_locked = false; + } +} + /* Inserting into a given leaf node (last stage of insert): */ /* Handle overwrites and do insert, for non extents: */ @@ -732,37 +779,6 @@ revert_fs_usage: return ret; } -static noinline int trans_lock_write_fail(struct btree_trans *trans, struct btree_insert_entry *i) -{ - while (--i >= trans->updates) { - if (same_leaf_as_prev(trans, i)) - continue; - - bch2_btree_node_unlock_write(trans, i->path, insert_l(i)->b); - } - - trace_and_count(trans->c, trans_restart_would_deadlock_write, trans); - return btree_trans_restart(trans, BCH_ERR_transaction_restart_would_deadlock_write); -} - -static inline int trans_lock_write(struct btree_trans *trans) -{ - struct btree_insert_entry *i; - - trans_for_each_update(trans, i) { - if (same_leaf_as_prev(trans, i)) - continue; - - if (bch2_btree_node_lock_write(trans, i->path, &insert_l(i)->b->c)) - return trans_lock_write_fail(trans, i); - - if (!i->cached) - bch2_btree_node_prep_for_write(trans, i->path, insert_l(i)->b); - } - - return 0; -} - static noinline void bch2_drop_overwrites_from_journal(struct btree_trans *trans) { struct btree_insert_entry *i; @@ -838,7 +854,7 @@ static inline int do_bch2_trans_commit(struct btree_trans *trans, unsigned flags if (unlikely(ret)) return ret; - ret = trans_lock_write(trans); + ret = bch2_trans_lock_write(trans); if (unlikely(ret)) return ret; @@ -847,10 +863,7 @@ static inline int do_bch2_trans_commit(struct btree_trans *trans, unsigned flags if (!ret && unlikely(trans->journal_replay_not_finished)) bch2_drop_overwrites_from_journal(trans); - trans_for_each_update(trans, i) - if (!same_leaf_as_prev(trans, i)) - bch2_btree_node_unlock_write_inlined(trans, i->path, - insert_l(i)->b); + bch2_trans_unlock_write(trans); if (!ret && trans->journal_pin) bch2_journal_pin_add(&c->journal, trans->journal_res.seq, diff --git a/fs/bcachefs/btree_types.h b/fs/bcachefs/btree_types.h index be5d6027e796..f3669fa68591 100644 --- a/fs/bcachefs/btree_types.h +++ b/fs/bcachefs/btree_types.h @@ -409,6 +409,7 @@ struct btree_trans { bool journal_transaction_names:1; bool journal_replay_not_finished:1; bool notrace_relock_fail:1; + bool write_locked:1; enum bch_errcode restarted:16; u32 restart_count; unsigned long last_begin_ip; -- cgit v1.2.3 From 09b0283ee23a02094a43a9b93146d1060c58fc3a Mon Sep 17 00:00:00 2001 From: Kent Overstreet Date: Sun, 5 Nov 2023 15:28:44 -0500 Subject: bcachefs: Make sure to drop/retake btree locks before reclaim We really don't want to be invoking memory reclaim with btree locks held: even aside from (solvable, but tricky) recursion issues, it can cause painful to diagnose performance edge cases. This fixes a recently reported issue in btree_key_can_insert_cached(). Signed-off-by: Kent Overstreet Reported-by: Mateusz Guzik Fixes: https://lore.kernel.org/linux-bcachefs/CAGudoHEsb_hGRMeWeXh+UF6po0qQuuq_NKSEo+s1sEb6bDLjpA@mail.gmail.com/T/ --- fs/bcachefs/btree_trans_commit.c | 48 +++++++++++++++++++++++++++++++++++----- 1 file changed, 42 insertions(+), 6 deletions(-) diff --git a/fs/bcachefs/btree_trans_commit.c b/fs/bcachefs/btree_trans_commit.c index 02491f7bb831..55a120eb8692 100644 --- a/fs/bcachefs/btree_trans_commit.c +++ b/fs/bcachefs/btree_trans_commit.c @@ -368,6 +368,45 @@ static inline int btree_key_can_insert(struct btree_trans *trans, return 0; } +noinline static int +btree_key_can_insert_cached_slowpath(struct btree_trans *trans, unsigned flags, + struct btree_path *path, unsigned new_u64s) +{ + struct bch_fs *c = trans->c; + struct btree_insert_entry *i; + struct bkey_cached *ck = (void *) path->l[0].b; + struct bkey_i *new_k; + int ret; + + bch2_trans_unlock_write(trans); + bch2_trans_unlock(trans); + + new_k = kmalloc(new_u64s * sizeof(u64), GFP_KERNEL); + if (!new_k) { + bch_err(c, "error allocating memory for key cache key, btree %s u64s %u", + bch2_btree_id_str(path->btree_id), new_u64s); + return -BCH_ERR_ENOMEM_btree_key_cache_insert; + } + + ret = bch2_trans_relock(trans) ?: + bch2_trans_lock_write(trans); + if (unlikely(ret)) { + kfree(new_k); + return ret; + } + + memcpy(new_k, ck->k, ck->u64s * sizeof(u64)); + + trans_for_each_update(trans, i) + if (i->old_v == &ck->k->v) + i->old_v = &new_k->v; + + kfree(ck->k); + ck->u64s = new_u64s; + ck->k = new_k; + return 0; +} + static int btree_key_can_insert_cached(struct btree_trans *trans, unsigned flags, struct btree_path *path, unsigned u64s) { @@ -394,12 +433,9 @@ static int btree_key_can_insert_cached(struct btree_trans *trans, unsigned flags return 0; new_u64s = roundup_pow_of_two(u64s); - new_k = krealloc(ck->k, new_u64s * sizeof(u64), GFP_NOFS); - if (!new_k) { - bch_err(c, "error allocating memory for key cache key, btree %s u64s %u", - bch2_btree_id_str(path->btree_id), new_u64s); - return -BCH_ERR_ENOMEM_btree_key_cache_insert; - } + new_k = krealloc(ck->k, new_u64s * sizeof(u64), GFP_NOWAIT); + if (unlikely(!new_k)) + return btree_key_can_insert_cached_slowpath(trans, flags, path, new_u64s); trans_for_each_update(trans, i) if (i->old_v == &ck->k->v) -- cgit v1.2.3 From 701ff57eb3d7c86c9a53de959e0c48fa8ca446d4 Mon Sep 17 00:00:00 2001 From: Kent Overstreet Date: Fri, 3 Nov 2023 18:38:35 -0400 Subject: bcachefs: Check for nonce offset inconsistency in data_update path We've rarely been seeing a nonce offset inconsistency that doesn't show up in tests: this adds some extra verification code to the data update path that prints out more relevant info when it occurs. Signed-off-by: Kent Overstreet --- fs/bcachefs/data_update.c | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+) diff --git a/fs/bcachefs/data_update.c b/fs/bcachefs/data_update.c index 0771a6d880bf..5ed66202c226 100644 --- a/fs/bcachefs/data_update.c +++ b/fs/bcachefs/data_update.c @@ -239,6 +239,34 @@ restart_drop_extra_replicas: next_pos = insert->k.p; + /* + * Check for nonce offset inconsistency: + * This is debug code - we've been seeing this bug rarely, and + * it's been hard to reproduce, so this should give us some more + * information when it does occur: + */ + struct printbuf err = PRINTBUF; + int invalid = bch2_bkey_invalid(c, bkey_i_to_s_c(insert), __btree_node_type(0, m->btree_id), 0, &err); + printbuf_exit(&err); + + if (invalid) { + struct printbuf buf = PRINTBUF; + + prt_str(&buf, "about to insert invalid key in data update path"); + prt_str(&buf, "\nold: "); + bch2_bkey_val_to_text(&buf, c, old); + prt_str(&buf, "\nk: "); + bch2_bkey_val_to_text(&buf, c, k); + prt_str(&buf, "\nnew: "); + bch2_bkey_val_to_text(&buf, c, bkey_i_to_s_c(insert)); + + bch2_print_string_as_lines(KERN_ERR, buf.buf); + printbuf_exit(&buf); + + bch2_fatal_error(c); + goto out; + } + ret = bch2_insert_snapshot_whiteouts(trans, m->btree_id, k.k->p, bkey_start_pos(&insert->k)) ?: bch2_insert_snapshot_whiteouts(trans, m->btree_id, -- cgit v1.2.3 From 4b3812d90b2c93723adf4b6ce99240d301f7d5f9 Mon Sep 17 00:00:00 2001 From: Jakub Kicinski Date: Mon, 13 Nov 2023 20:49:39 -0800 Subject: Revert "ptp: Fixes a null pointer dereference in ptp_ioctl" This reverts commit 8a4f030dbced6fc255cbe67b2d0a129947e18493. Richard says: The test itself is harmless, but keeping it will make people think, "oh this pointer can be invalid." In fact the core stack ensures that ioctl() can't be invoked after release(), otherwise Bad Stuff happens. Fixes: 8a4f030dbced ("ptp: Fixes a null pointer dereference in ptp_ioctl") Link: https://lore.kernel.org/all/ZVAf_qdRfDAQYUt-@hoboy.vegasvil.org/ Signed-off-by: Jakub Kicinski --- drivers/ptp/ptp_chardev.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/ptp/ptp_chardev.c b/drivers/ptp/ptp_chardev.c index e95a6ed130ef..3f7a74788802 100644 --- a/drivers/ptp/ptp_chardev.c +++ b/drivers/ptp/ptp_chardev.c @@ -176,8 +176,6 @@ long ptp_ioctl(struct posix_clock_context *pccontext, unsigned int cmd, int enable, err = 0; tsevq = pccontext->private_clkdata; - if (!tsevq) - return -EINVAL; switch (cmd) { -- cgit v1.2.3 From 73bde5a3294853947252cd9092a3517c7cb0cd2d Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Thu, 9 Nov 2023 17:48:59 +0000 Subject: ptp: annotate data-race around q->head and q->tail As I was working on a syzbot report, I found that KCSAN would probably complain that reading q->head or q->tail without barriers could lead to invalid results. Add corresponding READ_ONCE() and WRITE_ONCE() to avoid load-store tearing. Fixes: d94ba80ebbea ("ptp: Added a brand new class driver for ptp clocks.") Signed-off-by: Eric Dumazet Acked-by: Richard Cochran Link: https://lore.kernel.org/r/20231109174859.3995880-1-edumazet@google.com Signed-off-by: Jakub Kicinski --- drivers/ptp/ptp_chardev.c | 3 ++- drivers/ptp/ptp_clock.c | 5 +++-- drivers/ptp/ptp_private.h | 8 ++++++-- drivers/ptp/ptp_sysfs.c | 3 ++- 4 files changed, 13 insertions(+), 6 deletions(-) diff --git a/drivers/ptp/ptp_chardev.c b/drivers/ptp/ptp_chardev.c index 3f7a74788802..7513018c9f9a 100644 --- a/drivers/ptp/ptp_chardev.c +++ b/drivers/ptp/ptp_chardev.c @@ -572,7 +572,8 @@ ssize_t ptp_read(struct posix_clock_context *pccontext, uint rdflags, for (i = 0; i < cnt; i++) { event[i] = queue->buf[queue->head]; - queue->head = (queue->head + 1) % PTP_MAX_TIMESTAMPS; + /* Paired with READ_ONCE() in queue_cnt() */ + WRITE_ONCE(queue->head, (queue->head + 1) % PTP_MAX_TIMESTAMPS); } spin_unlock_irqrestore(&queue->lock, flags); diff --git a/drivers/ptp/ptp_clock.c b/drivers/ptp/ptp_clock.c index 3134568af622..15b804ba4868 100644 --- a/drivers/ptp/ptp_clock.c +++ b/drivers/ptp/ptp_clock.c @@ -57,10 +57,11 @@ static void enqueue_external_timestamp(struct timestamp_event_queue *queue, dst->t.sec = seconds; dst->t.nsec = remainder; + /* Both WRITE_ONCE() are paired with READ_ONCE() in queue_cnt() */ if (!queue_free(queue)) - queue->head = (queue->head + 1) % PTP_MAX_TIMESTAMPS; + WRITE_ONCE(queue->head, (queue->head + 1) % PTP_MAX_TIMESTAMPS); - queue->tail = (queue->tail + 1) % PTP_MAX_TIMESTAMPS; + WRITE_ONCE(queue->tail, (queue->tail + 1) % PTP_MAX_TIMESTAMPS); spin_unlock_irqrestore(&queue->lock, flags); } diff --git a/drivers/ptp/ptp_private.h b/drivers/ptp/ptp_private.h index 35fde0a05746..45f9002a5dca 100644 --- a/drivers/ptp/ptp_private.h +++ b/drivers/ptp/ptp_private.h @@ -85,9 +85,13 @@ struct ptp_vclock { * that a writer might concurrently increment the tail does not * matter, since the queue remains nonempty nonetheless. */ -static inline int queue_cnt(struct timestamp_event_queue *q) +static inline int queue_cnt(const struct timestamp_event_queue *q) { - int cnt = q->tail - q->head; + /* + * Paired with WRITE_ONCE() in enqueue_external_timestamp(), + * ptp_read(), extts_fifo_show(). + */ + int cnt = READ_ONCE(q->tail) - READ_ONCE(q->head); return cnt < 0 ? PTP_MAX_TIMESTAMPS + cnt : cnt; } diff --git a/drivers/ptp/ptp_sysfs.c b/drivers/ptp/ptp_sysfs.c index 7d023d9d0acb..f7a499a1bd39 100644 --- a/drivers/ptp/ptp_sysfs.c +++ b/drivers/ptp/ptp_sysfs.c @@ -94,7 +94,8 @@ static ssize_t extts_fifo_show(struct device *dev, qcnt = queue_cnt(queue); if (qcnt) { event = queue->buf[queue->head]; - queue->head = (queue->head + 1) % PTP_MAX_TIMESTAMPS; + /* Paired with READ_ONCE() in queue_cnt() */ + WRITE_ONCE(queue->head, (queue->head + 1) % PTP_MAX_TIMESTAMPS); } spin_unlock_irqrestore(&queue->lock, flags); -- cgit v1.2.3 From 3cffa2ddc4d3fcf70cde361236f5a614f81a09b2 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Thu, 9 Nov 2023 18:01:02 +0000 Subject: bonding: stop the device in bond_setup_by_slave() Commit 9eed321cde22 ("net: lapbether: only support ethernet devices") has been able to keep syzbot away from net/lapb, until today. In the following splat [1], the issue is that a lapbether device has been created on a bonding device without members. Then adding a non ARPHRD_ETHER member forced the bonding master to change its type. The fix is to make sure we call dev_close() in bond_setup_by_slave() so that the potential linked lapbether devices (or any other devices having assumptions on the physical device) are removed. A similar bug has been addressed in commit 40baec225765 ("bonding: fix panic on non-ARPHRD_ETHER enslave failure") [1] skbuff: skb_under_panic: text:ffff800089508810 len:44 put:40 head:ffff0000c78e7c00 data:ffff0000c78e7bea tail:0x16 end:0x140 dev:bond0 kernel BUG at net/core/skbuff.c:192 ! Internal error: Oops - BUG: 00000000f2000800 [#1] PREEMPT SMP Modules linked in: CPU: 0 PID: 6007 Comm: syz-executor383 Not tainted 6.6.0-rc3-syzkaller-gbf6547d8715b #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/04/2023 pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : skb_panic net/core/skbuff.c:188 [inline] pc : skb_under_panic+0x13c/0x140 net/core/skbuff.c:202 lr : skb_panic net/core/skbuff.c:188 [inline] lr : skb_under_panic+0x13c/0x140 net/core/skbuff.c:202 sp : ffff800096a06aa0 x29: ffff800096a06ab0 x28: ffff800096a06ba0 x27: dfff800000000000 x26: ffff0000ce9b9b50 x25: 0000000000000016 x24: ffff0000c78e7bea x23: ffff0000c78e7c00 x22: 000000000000002c x21: 0000000000000140 x20: 0000000000000028 x19: ffff800089508810 x18: ffff800096a06100 x17: 0000000000000000 x16: ffff80008a629a3c x15: 0000000000000001 x14: 1fffe00036837a32 x13: 0000000000000000 x12: 0000000000000000 x11: 0000000000000201 x10: 0000000000000000 x9 : cb50b496c519aa00 x8 : cb50b496c519aa00 x7 : 0000000000000001 x6 : 0000000000000001 x5 : ffff800096a063b8 x4 : ffff80008e280f80 x3 : ffff8000805ad11c x2 : 0000000000000001 x1 : 0000000100000201 x0 : 0000000000000086 Call trace: skb_panic net/core/skbuff.c:188 [inline] skb_under_panic+0x13c/0x140 net/core/skbuff.c:202 skb_push+0xf0/0x108 net/core/skbuff.c:2446 ip6gre_header+0xbc/0x738 net/ipv6/ip6_gre.c:1384 dev_hard_header include/linux/netdevice.h:3136 [inline] lapbeth_data_transmit+0x1c4/0x298 drivers/net/wan/lapbether.c:257 lapb_data_transmit+0x8c/0xb0 net/lapb/lapb_iface.c:447 lapb_transmit_buffer+0x178/0x204 net/lapb/lapb_out.c:149 lapb_send_control+0x220/0x320 net/lapb/lapb_subr.c:251 __lapb_disconnect_request+0x9c/0x17c net/lapb/lapb_iface.c:326 lapb_device_event+0x288/0x4e0 net/lapb/lapb_iface.c:492 notifier_call_chain+0x1a4/0x510 kernel/notifier.c:93 raw_notifier_call_chain+0x3c/0x50 kernel/notifier.c:461 call_netdevice_notifiers_info net/core/dev.c:1970 [inline] call_netdevice_notifiers_extack net/core/dev.c:2008 [inline] call_netdevice_notifiers net/core/dev.c:2022 [inline] __dev_close_many+0x1b8/0x3c4 net/core/dev.c:1508 dev_close_many+0x1e0/0x470 net/core/dev.c:1559 dev_close+0x174/0x250 net/core/dev.c:1585 lapbeth_device_event+0x2e4/0x958 drivers/net/wan/lapbether.c:466 notifier_call_chain+0x1a4/0x510 kernel/notifier.c:93 raw_notifier_call_chain+0x3c/0x50 kernel/notifier.c:461 call_netdevice_notifiers_info net/core/dev.c:1970 [inline] call_netdevice_notifiers_extack net/core/dev.c:2008 [inline] call_netdevice_notifiers net/core/dev.c:2022 [inline] __dev_close_many+0x1b8/0x3c4 net/core/dev.c:1508 dev_close_many+0x1e0/0x470 net/core/dev.c:1559 dev_close+0x174/0x250 net/core/dev.c:1585 bond_enslave+0x2298/0x30cc drivers/net/bonding/bond_main.c:2332 bond_do_ioctl+0x268/0xc64 drivers/net/bonding/bond_main.c:4539 dev_ifsioc+0x754/0x9ac dev_ioctl+0x4d8/0xd34 net/core/dev_ioctl.c:786 sock_do_ioctl+0x1d4/0x2d0 net/socket.c:1217 sock_ioctl+0x4e8/0x834 net/socket.c:1322 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:871 [inline] __se_sys_ioctl fs/ioctl.c:857 [inline] __arm64_sys_ioctl+0x14c/0x1c8 fs/ioctl.c:857 __invoke_syscall arch/arm64/kernel/syscall.c:37 [inline] invoke_syscall+0x98/0x2b8 arch/arm64/kernel/syscall.c:51 el0_svc_common+0x130/0x23c arch/arm64/kernel/syscall.c:136 do_el0_svc+0x48/0x58 arch/arm64/kernel/syscall.c:155 el0_svc+0x58/0x16c arch/arm64/kernel/entry-common.c:678 el0t_64_sync_handler+0x84/0xfc arch/arm64/kernel/entry-common.c:696 el0t_64_sync+0x190/0x194 arch/arm64/kernel/entry.S:591 Code: aa1803e6 aa1903e7 a90023f5 94785b8b (d4210000) Fixes: 872254dd6b1f ("net/bonding: Enable bonding to enslave non ARPHRD_ETHER") Reported-by: syzbot Signed-off-by: Eric Dumazet Acked-by: Jay Vosburgh Reviewed-by: Hangbin Liu Link: https://lore.kernel.org/r/20231109180102.4085183-1-edumazet@google.com Signed-off-by: Jakub Kicinski --- drivers/net/bonding/bond_main.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index 51d47eda1c87..8e6cc0e133b7 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -1500,6 +1500,10 @@ done: static void bond_setup_by_slave(struct net_device *bond_dev, struct net_device *slave_dev) { + bool was_up = !!(bond_dev->flags & IFF_UP); + + dev_close(bond_dev); + bond_dev->header_ops = slave_dev->header_ops; bond_dev->type = slave_dev->type; @@ -1514,6 +1518,8 @@ static void bond_setup_by_slave(struct net_device *bond_dev, bond_dev->flags &= ~(IFF_BROADCAST | IFF_MULTICAST); bond_dev->flags |= (IFF_POINTOPOINT | IFF_NOARP); } + if (was_up) + dev_open(bond_dev, NULL); } /* On bonding slaves other than the currently active slave, suppress -- cgit v1.2.3 From 510e35fb931ffc3b100e5d5ae4595cd3beca9f1a Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Thu, 9 Nov 2023 10:03:12 +0100 Subject: net: ethernet: cortina: Fix max RX frame define Enumerator 3 is 1548 bytes according to the datasheet. Not 1542. Fixes: 4d5ae32f5e1e ("net: ethernet: Add a driver for Gemini gigabit ethernet") Reviewed-by: Andrew Lunn Signed-off-by: Linus Walleij Reviewed-by: Vladimir Oltean Link: https://lore.kernel.org/r/20231109-gemini-largeframe-fix-v4-1-6e611528db08@linaro.org Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/cortina/gemini.c | 4 ++-- drivers/net/ethernet/cortina/gemini.h | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/net/ethernet/cortina/gemini.c b/drivers/net/ethernet/cortina/gemini.c index 5423fe26b4ef..562b0917316a 100644 --- a/drivers/net/ethernet/cortina/gemini.c +++ b/drivers/net/ethernet/cortina/gemini.c @@ -432,8 +432,8 @@ static const struct gmac_max_framelen gmac_maxlens[] = { .val = CONFIG0_MAXLEN_1536, }, { - .max_l3_len = 1542, - .val = CONFIG0_MAXLEN_1542, + .max_l3_len = 1548, + .val = CONFIG0_MAXLEN_1548, }, { .max_l3_len = 9212, diff --git a/drivers/net/ethernet/cortina/gemini.h b/drivers/net/ethernet/cortina/gemini.h index 9fdf77d5eb37..99efb1155743 100644 --- a/drivers/net/ethernet/cortina/gemini.h +++ b/drivers/net/ethernet/cortina/gemini.h @@ -787,7 +787,7 @@ union gmac_config0 { #define CONFIG0_MAXLEN_1536 0 #define CONFIG0_MAXLEN_1518 1 #define CONFIG0_MAXLEN_1522 2 -#define CONFIG0_MAXLEN_1542 3 +#define CONFIG0_MAXLEN_1548 3 #define CONFIG0_MAXLEN_9k 4 /* 9212 */ #define CONFIG0_MAXLEN_10k 5 /* 10236 */ #define CONFIG0_MAXLEN_1518__6 6 -- cgit v1.2.3 From d4d0c5b4d279bfe3585fbd806efefd3e51c82afa Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Thu, 9 Nov 2023 10:03:13 +0100 Subject: net: ethernet: cortina: Handle large frames The Gemini ethernet controller provides hardware checksumming for frames up to 1514 bytes including ethernet headers but not FCS. If we start sending bigger frames (after first bumping up the MTU on both interfaces sending and receiving the frames), truncated packets start to appear on the target such as in this tcpdump resulting from ping -s 1474: 23:34:17.241983 14:d6:4d:a8:3c:4f (oui Unknown) > bc:ae:c5:6b:a8:3d (oui Unknown), ethertype IPv4 (0x0800), length 1514: truncated-ip - 2 bytes missing! (tos 0x0, ttl 64, id 32653, offset 0, flags [DF], proto ICMP (1), length 1502) OpenWrt.lan > Fecusia: ICMP echo request, id 1672, seq 50, length 1482 If we bypass the hardware checksumming and provide a software fallback, everything starts working fine up to the max TX MTU of 2047 bytes, for example ping -s2000 192.168.1.2: 00:44:29.587598 bc:ae:c5:6b:a8:3d (oui Unknown) > 14:d6:4d:a8:3c:4f (oui Unknown), ethertype IPv4 (0x0800), length 2042: (tos 0x0, ttl 64, id 51828, offset 0, flags [none], proto ICMP (1), length 2028) Fecusia > OpenWrt.lan: ICMP echo reply, id 1683, seq 4, length 2008 The bit enabling to bypass hardware checksum (or any of the "TSS" bits) are undocumented in the hardware reference manual. The entire hardware checksum unit appears undocumented. The conclusion that we need to use the "bypass" bit was found by trial-and-error. Since no hardware checksum will happen, we slot in a software checksum fallback. Check for the condition where we need to compute checksum on the skb with either hardware or software using == CHECKSUM_PARTIAL instead of != CHECKSUM_NONE which is an incomplete check according to . On the D-Link DIR-685 router this fixes a bug on the conduit interface to the RTL8366RB DSA switch: as the switch needs to add space for its tag it increases the MTU on the conduit interface to 1504 and that means that when the router sends packages of 1500 bytes these get an extra 4 bytes of DSA tag and the transfer fails because of the erroneous hardware checksumming, affecting such basic functionality as the LuCI web interface. Fixes: 4d5ae32f5e1e ("net: ethernet: Add a driver for Gemini gigabit ethernet") Signed-off-by: Linus Walleij Reviewed-by: Vladimir Oltean Link: https://lore.kernel.org/r/20231109-gemini-largeframe-fix-v4-2-6e611528db08@linaro.org Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/cortina/gemini.c | 24 +++++++++++++++++++++++- 1 file changed, 23 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/cortina/gemini.c b/drivers/net/ethernet/cortina/gemini.c index 562b0917316a..e5e73dee13ac 100644 --- a/drivers/net/ethernet/cortina/gemini.c +++ b/drivers/net/ethernet/cortina/gemini.c @@ -1145,6 +1145,7 @@ static int gmac_map_tx_bufs(struct net_device *netdev, struct sk_buff *skb, dma_addr_t mapping; unsigned short mtu; void *buffer; + int ret; mtu = ETH_HLEN; mtu += netdev->mtu; @@ -1159,9 +1160,30 @@ static int gmac_map_tx_bufs(struct net_device *netdev, struct sk_buff *skb, word3 |= mtu; } - if (skb->ip_summed != CHECKSUM_NONE) { + if (skb->len >= ETH_FRAME_LEN) { + /* Hardware offloaded checksumming isn't working on frames + * bigger than 1514 bytes. A hypothesis about this is that the + * checksum buffer is only 1518 bytes, so when the frames get + * bigger they get truncated, or the last few bytes get + * overwritten by the FCS. + * + * Just use software checksumming and bypass on bigger frames. + */ + if (skb->ip_summed == CHECKSUM_PARTIAL) { + ret = skb_checksum_help(skb); + if (ret) + return ret; + } + word1 |= TSS_BYPASS_BIT; + } else if (skb->ip_summed == CHECKSUM_PARTIAL) { int tcp = 0; + /* We do not switch off the checksumming on non TCP/UDP + * frames: as is shown from tests, the checksumming engine + * is smart enough to see that a frame is not actually TCP + * or UDP and then just pass it through without any changes + * to the frame. + */ if (skb->protocol == htons(ETH_P_IP)) { word1 |= TSS_IP_CHKSUM_BIT; tcp = ip_hdr(skb)->protocol == IPPROTO_TCP; -- cgit v1.2.3 From dc6c0bfbaa947dd7976e30e8c29b10c868b6fa42 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Thu, 9 Nov 2023 10:03:14 +0100 Subject: net: ethernet: cortina: Fix MTU max setting The RX max frame size is over 10000 for the Gemini ethernet, but the TX max frame size is actually just 2047 (0x7ff after checking the datasheet). Reflect this in what we offer to Linux, cap the MTU at the TX max frame minus ethernet headers. We delete the code disabling the hardware checksum for large MTUs as netdev->mtu can no longer be larger than netdev->max_mtu meaning the if()-clause in gmac_fix_features() is never true. Fixes: 4d5ae32f5e1e ("net: ethernet: Add a driver for Gemini gigabit ethernet") Reviewed-by: Andrew Lunn Signed-off-by: Linus Walleij Reviewed-by: Vladimir Oltean Link: https://lore.kernel.org/r/20231109-gemini-largeframe-fix-v4-3-6e611528db08@linaro.org Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/cortina/gemini.c | 17 ++++------------- drivers/net/ethernet/cortina/gemini.h | 2 +- 2 files changed, 5 insertions(+), 14 deletions(-) diff --git a/drivers/net/ethernet/cortina/gemini.c b/drivers/net/ethernet/cortina/gemini.c index e5e73dee13ac..78287cfcbf63 100644 --- a/drivers/net/ethernet/cortina/gemini.c +++ b/drivers/net/ethernet/cortina/gemini.c @@ -2000,15 +2000,6 @@ static int gmac_change_mtu(struct net_device *netdev, int new_mtu) return 0; } -static netdev_features_t gmac_fix_features(struct net_device *netdev, - netdev_features_t features) -{ - if (netdev->mtu + ETH_HLEN + VLAN_HLEN > MTU_SIZE_BIT_MASK) - features &= ~GMAC_OFFLOAD_FEATURES; - - return features; -} - static int gmac_set_features(struct net_device *netdev, netdev_features_t features) { @@ -2234,7 +2225,6 @@ static const struct net_device_ops gmac_351x_ops = { .ndo_set_mac_address = gmac_set_mac_address, .ndo_get_stats64 = gmac_get_stats64, .ndo_change_mtu = gmac_change_mtu, - .ndo_fix_features = gmac_fix_features, .ndo_set_features = gmac_set_features, }; @@ -2486,11 +2476,12 @@ static int gemini_ethernet_port_probe(struct platform_device *pdev) netdev->hw_features = GMAC_OFFLOAD_FEATURES; netdev->features |= GMAC_OFFLOAD_FEATURES | NETIF_F_GRO; - /* We can handle jumbo frames up to 10236 bytes so, let's accept - * payloads of 10236 bytes minus VLAN and ethernet header + /* We can receive jumbo frames up to 10236 bytes but only + * transmit 2047 bytes so, let's accept payloads of 2047 + * bytes minus VLAN and ethernet header */ netdev->min_mtu = ETH_MIN_MTU; - netdev->max_mtu = 10236 - VLAN_ETH_HLEN; + netdev->max_mtu = MTU_SIZE_BIT_MASK - VLAN_ETH_HLEN; port->freeq_refill = 0; netif_napi_add(netdev, &port->napi, gmac_napi_poll); diff --git a/drivers/net/ethernet/cortina/gemini.h b/drivers/net/ethernet/cortina/gemini.h index 99efb1155743..24bb989981f2 100644 --- a/drivers/net/ethernet/cortina/gemini.h +++ b/drivers/net/ethernet/cortina/gemini.h @@ -502,7 +502,7 @@ union gmac_txdesc_3 { #define SOF_BIT 0x80000000 #define EOF_BIT 0x40000000 #define EOFIE_BIT BIT(29) -#define MTU_SIZE_BIT_MASK 0x1fff +#define MTU_SIZE_BIT_MASK 0x7ff /* Max MTU 2047 bytes */ /* GMAC Tx Descriptor */ struct gmac_txdesc { -- cgit v1.2.3 From 0ab0c45d8aaea5192328bfa6989673aceafc767c Mon Sep 17 00:00:00 2001 From: ChunHao Lin Date: Fri, 10 Nov 2023 01:33:59 +0800 Subject: r8169: add handling DASH when DASH is disabled For devices that support DASH, even DASH is disabled, there may still exist a default firmware that will influence device behavior. So driver needs to handle DASH for devices that support DASH, no matter the DASH status is. This patch also prepares for "fix network lost after resume on DASH systems". Fixes: ee7a1beb9759 ("r8169:call "rtl8168_driver_start" "rtl8168_driver_stop" only when hardware dash function is enabled") Cc: stable@vger.kernel.org Signed-off-by: ChunHao Lin Reviewed-by: Heiner Kallweit Link: https://lore.kernel.org/r/20231109173400.4573-2-hau@realtek.com Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/realtek/r8169_main.c | 36 +++++++++++++++++++++---------- 1 file changed, 25 insertions(+), 11 deletions(-) diff --git a/drivers/net/ethernet/realtek/r8169_main.c b/drivers/net/ethernet/realtek/r8169_main.c index 0c76c162b8a9..cfcb40d90920 100644 --- a/drivers/net/ethernet/realtek/r8169_main.c +++ b/drivers/net/ethernet/realtek/r8169_main.c @@ -624,6 +624,7 @@ struct rtl8169_private { unsigned supports_gmii:1; unsigned aspm_manageable:1; + unsigned dash_enabled:1; dma_addr_t counters_phys_addr; struct rtl8169_counters *counters; struct rtl8169_tc_offsets tc_offset; @@ -1253,14 +1254,26 @@ static bool r8168ep_check_dash(struct rtl8169_private *tp) return r8168ep_ocp_read(tp, 0x128) & BIT(0); } -static enum rtl_dash_type rtl_check_dash(struct rtl8169_private *tp) +static bool rtl_dash_is_enabled(struct rtl8169_private *tp) +{ + switch (tp->dash_type) { + case RTL_DASH_DP: + return r8168dp_check_dash(tp); + case RTL_DASH_EP: + return r8168ep_check_dash(tp); + default: + return false; + } +} + +static enum rtl_dash_type rtl_get_dash_type(struct rtl8169_private *tp) { switch (tp->mac_version) { case RTL_GIGA_MAC_VER_28: case RTL_GIGA_MAC_VER_31: - return r8168dp_check_dash(tp) ? RTL_DASH_DP : RTL_DASH_NONE; + return RTL_DASH_DP; case RTL_GIGA_MAC_VER_51 ... RTL_GIGA_MAC_VER_53: - return r8168ep_check_dash(tp) ? RTL_DASH_EP : RTL_DASH_NONE; + return RTL_DASH_EP; default: return RTL_DASH_NONE; } @@ -1453,7 +1466,7 @@ static void __rtl8169_set_wol(struct rtl8169_private *tp, u32 wolopts) device_set_wakeup_enable(tp_to_dev(tp), wolopts); - if (tp->dash_type == RTL_DASH_NONE) { + if (!tp->dash_enabled) { rtl_set_d3_pll_down(tp, !wolopts); tp->dev->wol_enabled = wolopts ? 1 : 0; } @@ -2512,7 +2525,7 @@ static void rtl_wol_enable_rx(struct rtl8169_private *tp) static void rtl_prepare_power_down(struct rtl8169_private *tp) { - if (tp->dash_type != RTL_DASH_NONE) + if (tp->dash_enabled) return; if (tp->mac_version == RTL_GIGA_MAC_VER_32 || @@ -4869,7 +4882,7 @@ static int rtl8169_runtime_idle(struct device *device) { struct rtl8169_private *tp = dev_get_drvdata(device); - if (tp->dash_type != RTL_DASH_NONE) + if (tp->dash_enabled) return -EBUSY; if (!netif_running(tp->dev) || !netif_carrier_ok(tp->dev)) @@ -4895,8 +4908,7 @@ static void rtl_shutdown(struct pci_dev *pdev) /* Restore original MAC address */ rtl_rar_set(tp, tp->dev->perm_addr); - if (system_state == SYSTEM_POWER_OFF && - tp->dash_type == RTL_DASH_NONE) { + if (system_state == SYSTEM_POWER_OFF && !tp->dash_enabled) { pci_wake_from_d3(pdev, tp->saved_wolopts); pci_set_power_state(pdev, PCI_D3hot); } @@ -5254,7 +5266,8 @@ static int rtl_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) rc = pci_disable_link_state(pdev, PCIE_LINK_STATE_L1); tp->aspm_manageable = !rc; - tp->dash_type = rtl_check_dash(tp); + tp->dash_type = rtl_get_dash_type(tp); + tp->dash_enabled = rtl_dash_is_enabled(tp); tp->cp_cmd = RTL_R16(tp, CPlusCmd) & CPCMD_MASK; @@ -5325,7 +5338,7 @@ static int rtl_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) /* configure chip for default features */ rtl8169_set_features(dev, dev->features); - if (tp->dash_type == RTL_DASH_NONE) { + if (!tp->dash_enabled) { rtl_set_d3_pll_down(tp, true); } else { rtl_set_d3_pll_down(tp, false); @@ -5365,7 +5378,8 @@ static int rtl_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) "ok" : "ko"); if (tp->dash_type != RTL_DASH_NONE) { - netdev_info(dev, "DASH enabled\n"); + netdev_info(dev, "DASH %s\n", + tp->dash_enabled ? "enabled" : "disabled"); rtl8168_driver_start(tp); } -- cgit v1.2.3 From 868c3b95afef4883bfb66c9397482da6840b5baf Mon Sep 17 00:00:00 2001 From: ChunHao Lin Date: Fri, 10 Nov 2023 01:34:00 +0800 Subject: r8169: fix network lost after resume on DASH systems Device that support DASH may be reseted or powered off during suspend. So driver needs to handle DASH during system suspend and resume. Or DASH firmware will influence device behavior and causes network lost. Fixes: b646d90053f8 ("r8169: magic.") Cc: stable@vger.kernel.org Reviewed-by: Heiner Kallweit Signed-off-by: ChunHao Lin Link: https://lore.kernel.org/r/20231109173400.4573-3-hau@realtek.com Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/realtek/r8169_main.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/net/ethernet/realtek/r8169_main.c b/drivers/net/ethernet/realtek/r8169_main.c index cfcb40d90920..b9bb1d2f0237 100644 --- a/drivers/net/ethernet/realtek/r8169_main.c +++ b/drivers/net/ethernet/realtek/r8169_main.c @@ -4661,10 +4661,16 @@ static void rtl8169_down(struct rtl8169_private *tp) rtl8169_cleanup(tp); rtl_disable_exit_l1(tp); rtl_prepare_power_down(tp); + + if (tp->dash_type != RTL_DASH_NONE) + rtl8168_driver_stop(tp); } static void rtl8169_up(struct rtl8169_private *tp) { + if (tp->dash_type != RTL_DASH_NONE) + rtl8168_driver_start(tp); + pci_set_master(tp->pci_dev); phy_init_hw(tp->phydev); phy_resume(tp->phydev); -- cgit v1.2.3 From b28060db7172e6d8912d88b369123eb89e0d36b4 Mon Sep 17 00:00:00 2001 From: Amir Goldstein Date: Sun, 12 Nov 2023 11:12:49 +0200 Subject: ovl: fix misformatted comment Remove misleading /** prefix from a regular comment. Reported-by: kernel test robot Closes: https://lore.kernel.org/oe-kbuild-all/202311121628.byHp8tkv-lkp@intel.com/ Signed-off-by: Amir Goldstein --- fs/overlayfs/util.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/overlayfs/util.c b/fs/overlayfs/util.c index 50a201e9cd39..c3f020ca13a8 100644 --- a/fs/overlayfs/util.c +++ b/fs/overlayfs/util.c @@ -978,7 +978,7 @@ int ovl_set_protattr(struct inode *inode, struct dentry *upper, return 0; } -/** +/* * Caller must hold a reference to inode to prevent it from being freed while * it is marked inuse. */ -- cgit v1.2.3 From 37f32f52643869131ec01bb69bdf9f404f6109fb Mon Sep 17 00:00:00 2001 From: Amir Goldstein Date: Sun, 12 Nov 2023 10:11:25 +0200 Subject: ovl: fix memory leak in ovl_parse_param() On failure to parse parameters in ovl_parse_param_lowerdir(), it is necessary to update ctx->nr with the correct nr before using ovl_reset_lowerdirs() to release l->name. Reported-and-tested-by: syzbot+26eedf3631650972f17c@syzkaller.appspotmail.com Fixes: c835110b588a ("ovl: remove unused code in lowerdir param parsing") Co-authored-by: Edward Adam Davis Signed-off-by: Amir Goldstein --- fs/overlayfs/params.c | 11 +++++------ 1 file changed, 5 insertions(+), 6 deletions(-) diff --git a/fs/overlayfs/params.c b/fs/overlayfs/params.c index ddab9ea267d1..3fe2dde1598f 100644 --- a/fs/overlayfs/params.c +++ b/fs/overlayfs/params.c @@ -430,7 +430,7 @@ static int ovl_parse_param_lowerdir(const char *name, struct fs_context *fc) struct ovl_fs_context *ctx = fc->fs_private; struct ovl_fs_context_layer *l; char *dup = NULL, *iter; - ssize_t nr_lower = 0, nr = 0, nr_data = 0; + ssize_t nr_lower, nr; bool data_layer = false; /* @@ -482,6 +482,7 @@ static int ovl_parse_param_lowerdir(const char *name, struct fs_context *fc) iter = dup; l = ctx->lower; for (nr = 0; nr < nr_lower; nr++, l++) { + ctx->nr++; memset(l, 0, sizeof(*l)); err = ovl_mount_dir(iter, &l->path); @@ -498,10 +499,10 @@ static int ovl_parse_param_lowerdir(const char *name, struct fs_context *fc) goto out_put; if (data_layer) - nr_data++; + ctx->nr_data++; /* Calling strchr() again would overrun. */ - if ((nr + 1) == nr_lower) + if (ctx->nr == nr_lower) break; err = -EINVAL; @@ -511,7 +512,7 @@ static int ovl_parse_param_lowerdir(const char *name, struct fs_context *fc) * This is a regular layer so we require that * there are no data layers. */ - if ((ctx->nr_data + nr_data) > 0) { + if (ctx->nr_data > 0) { pr_err("regular lower layers cannot follow data lower layers"); goto out_put; } @@ -524,8 +525,6 @@ static int ovl_parse_param_lowerdir(const char *name, struct fs_context *fc) data_layer = true; iter++; } - ctx->nr = nr_lower; - ctx->nr_data += nr_data; kfree(dup); return 0; -- cgit v1.2.3 From 686464514fbebb6c8de4415238319e414c3500a4 Mon Sep 17 00:00:00 2001 From: Juergen Gross Date: Wed, 27 Sep 2023 08:58:05 +0200 Subject: xen/events: reduce externally visible helper functions get_evtchn_to_irq() has only one external user while irq_from_evtchn() provides the same functionality and is exported for a wider user base. Modify the only external user of get_evtchn_to_irq() to use irq_from_evtchn() instead and make get_evtchn_to_irq() static. evtchn_from_irq() and irq_from_virq() have a single external user and can easily be combined to a new helper irq_evtchn_from_virq() allowing to drop irq_from_virq() and to make evtchn_from_irq() static. Signed-off-by: Juergen Gross Reviewed-by: Oleksandr Tyshchenko Signed-off-by: Juergen Gross --- drivers/xen/events/events_2l.c | 8 ++++---- drivers/xen/events/events_base.c | 13 +++++++++---- drivers/xen/events/events_internal.h | 1 - include/xen/events.h | 4 ++-- 4 files changed, 15 insertions(+), 11 deletions(-) diff --git a/drivers/xen/events/events_2l.c b/drivers/xen/events/events_2l.c index b8f2f971c2f0..e3585330cf98 100644 --- a/drivers/xen/events/events_2l.c +++ b/drivers/xen/events/events_2l.c @@ -171,11 +171,11 @@ static void evtchn_2l_handle_events(unsigned cpu, struct evtchn_loop_ctrl *ctrl) int i; struct shared_info *s = HYPERVISOR_shared_info; struct vcpu_info *vcpu_info = __this_cpu_read(xen_vcpu); + evtchn_port_t evtchn; /* Timer interrupt has highest priority. */ - irq = irq_from_virq(cpu, VIRQ_TIMER); + irq = irq_evtchn_from_virq(cpu, VIRQ_TIMER, &evtchn); if (irq != -1) { - evtchn_port_t evtchn = evtchn_from_irq(irq); word_idx = evtchn / BITS_PER_LONG; bit_idx = evtchn % BITS_PER_LONG; if (active_evtchns(cpu, s, word_idx) & (1ULL << bit_idx)) @@ -328,9 +328,9 @@ irqreturn_t xen_debug_interrupt(int irq, void *dev_id) for (i = 0; i < EVTCHN_2L_NR_CHANNELS; i++) { if (sync_test_bit(i, BM(sh->evtchn_pending))) { int word_idx = i / BITS_PER_EVTCHN_WORD; - printk(" %d: event %d -> irq %d%s%s%s\n", + printk(" %d: event %d -> irq %u%s%s%s\n", cpu_from_evtchn(i), i, - get_evtchn_to_irq(i), + irq_from_evtchn(i), sync_test_bit(word_idx, BM(&v->evtchn_pending_sel)) ? "" : " l2-clear", !sync_test_bit(i, BM(sh->evtchn_mask)) diff --git a/drivers/xen/events/events_base.c b/drivers/xen/events/events_base.c index c5d86128eb73..a74ea28dcc3d 100644 --- a/drivers/xen/events/events_base.c +++ b/drivers/xen/events/events_base.c @@ -248,7 +248,7 @@ static int set_evtchn_to_irq(evtchn_port_t evtchn, unsigned int irq) return 0; } -int get_evtchn_to_irq(evtchn_port_t evtchn) +static int get_evtchn_to_irq(evtchn_port_t evtchn) { if (evtchn >= xen_evtchn_max_channels()) return -1; @@ -415,7 +415,7 @@ static void xen_irq_info_cleanup(struct irq_info *info) /* * Accessors for packed IRQ information. */ -evtchn_port_t evtchn_from_irq(unsigned irq) +static evtchn_port_t evtchn_from_irq(unsigned int irq) { const struct irq_info *info = NULL; @@ -433,9 +433,14 @@ unsigned int irq_from_evtchn(evtchn_port_t evtchn) } EXPORT_SYMBOL_GPL(irq_from_evtchn); -int irq_from_virq(unsigned int cpu, unsigned int virq) +int irq_evtchn_from_virq(unsigned int cpu, unsigned int virq, + evtchn_port_t *evtchn) { - return per_cpu(virq_to_irq, cpu)[virq]; + int irq = per_cpu(virq_to_irq, cpu)[virq]; + + *evtchn = evtchn_from_irq(irq); + + return irq; } static enum ipi_vector ipi_from_irq(unsigned irq) diff --git a/drivers/xen/events/events_internal.h b/drivers/xen/events/events_internal.h index 4d3398eff9cd..19ae31695edc 100644 --- a/drivers/xen/events/events_internal.h +++ b/drivers/xen/events/events_internal.h @@ -33,7 +33,6 @@ struct evtchn_ops { extern const struct evtchn_ops *evtchn_ops; -int get_evtchn_to_irq(evtchn_port_t evtchn); void handle_irq_for_port(evtchn_port_t port, struct evtchn_loop_ctrl *ctrl); unsigned int cpu_from_evtchn(evtchn_port_t evtchn); diff --git a/include/xen/events.h b/include/xen/events.h index a129cafa80ed..3b07409f8032 100644 --- a/include/xen/events.h +++ b/include/xen/events.h @@ -100,8 +100,8 @@ void xen_poll_irq_timeout(int irq, u64 timeout); /* Determine the IRQ which is bound to an event channel */ unsigned int irq_from_evtchn(evtchn_port_t evtchn); -int irq_from_virq(unsigned int cpu, unsigned int virq); -evtchn_port_t evtchn_from_irq(unsigned irq); +int irq_evtchn_from_virq(unsigned int cpu, unsigned int virq, + evtchn_port_t *evtchn); int xen_set_callback_via(uint64_t via); int xen_evtchn_do_upcall(void); -- cgit v1.2.3 From 3bdb0ac350fe5e6301562143e4573971dd01ae0b Mon Sep 17 00:00:00 2001 From: Juergen Gross Date: Wed, 27 Sep 2023 08:24:46 +0200 Subject: xen/events: remove some simple helpers from events_base.c The helper functions type_from_irq() and cpu_from_irq() are just one line functions used only internally. Open code them where needed. At the same time modify and rename get_evtchn_to_irq() to return a struct irq_info instead of the IRQ number. Signed-off-by: Juergen Gross Reviewed-by: Oleksandr Tyshchenko Signed-off-by: Juergen Gross --- drivers/xen/events/events_base.c | 97 ++++++++++++++++------------------------ 1 file changed, 38 insertions(+), 59 deletions(-) diff --git a/drivers/xen/events/events_base.c b/drivers/xen/events/events_base.c index a74ea28dcc3d..a810e8904fbf 100644 --- a/drivers/xen/events/events_base.c +++ b/drivers/xen/events/events_base.c @@ -248,15 +248,6 @@ static int set_evtchn_to_irq(evtchn_port_t evtchn, unsigned int irq) return 0; } -static int get_evtchn_to_irq(evtchn_port_t evtchn) -{ - if (evtchn >= xen_evtchn_max_channels()) - return -1; - if (evtchn_to_irq[EVTCHN_ROW(evtchn)] == NULL) - return -1; - return READ_ONCE(evtchn_to_irq[EVTCHN_ROW(evtchn)][EVTCHN_COL(evtchn)]); -} - /* Get info for IRQ */ static struct irq_info *info_for_irq(unsigned irq) { @@ -274,6 +265,19 @@ static void set_info_for_irq(unsigned int irq, struct irq_info *info) irq_set_chip_data(irq, info); } +static struct irq_info *evtchn_to_info(evtchn_port_t evtchn) +{ + int irq; + + if (evtchn >= xen_evtchn_max_channels()) + return NULL; + if (evtchn_to_irq[EVTCHN_ROW(evtchn)] == NULL) + return NULL; + irq = READ_ONCE(evtchn_to_irq[EVTCHN_ROW(evtchn)][EVTCHN_COL(evtchn)]); + + return (irq < 0) ? NULL : info_for_irq(irq); +} + /* Per CPU channel accounting */ static void channels_on_cpu_dec(struct irq_info *info) { @@ -429,7 +433,9 @@ static evtchn_port_t evtchn_from_irq(unsigned int irq) unsigned int irq_from_evtchn(evtchn_port_t evtchn) { - return get_evtchn_to_irq(evtchn); + struct irq_info *info = evtchn_to_info(evtchn); + + return info ? info->irq : -1; } EXPORT_SYMBOL_GPL(irq_from_evtchn); @@ -473,25 +479,11 @@ static unsigned pirq_from_irq(unsigned irq) return info->u.pirq.pirq; } -static enum xen_irq_type type_from_irq(unsigned irq) -{ - return info_for_irq(irq)->type; -} - -static unsigned cpu_from_irq(unsigned irq) -{ - return info_for_irq(irq)->cpu; -} - unsigned int cpu_from_evtchn(evtchn_port_t evtchn) { - int irq = get_evtchn_to_irq(evtchn); - unsigned ret = 0; - - if (irq != -1) - ret = cpu_from_irq(irq); + struct irq_info *info = evtchn_to_info(evtchn); - return ret; + return info ? info->cpu : 0; } static void do_mask(struct irq_info *info, u8 reason) @@ -540,13 +532,12 @@ static bool pirq_needs_eoi_flag(unsigned irq) static void bind_evtchn_to_cpu(evtchn_port_t evtchn, unsigned int cpu, bool force_affinity) { - int irq = get_evtchn_to_irq(evtchn); - struct irq_info *info = info_for_irq(irq); + struct irq_info *info = evtchn_to_info(evtchn); - BUG_ON(irq == -1); + BUG_ON(info == NULL); if (IS_ENABLED(CONFIG_SMP) && force_affinity) { - struct irq_data *data = irq_get_irq_data(irq); + struct irq_data *data = irq_get_irq_data(info->irq); irq_data_update_affinity(data, cpumask_of(cpu)); irq_data_update_effective_affinity(data, cpumask_of(cpu)); @@ -979,13 +970,13 @@ static void __unbind_from_irq(unsigned int irq) } if (VALID_EVTCHN(evtchn)) { - unsigned int cpu = cpu_from_irq(irq); + unsigned int cpu = info->cpu; struct xenbus_device *dev; if (!info->is_static) xen_evtchn_close(evtchn); - switch (type_from_irq(irq)) { + switch (info->type) { case IRQT_VIRQ: per_cpu(virq_to_irq, cpu)[virq_from_irq(irq)] = -1; break; @@ -1185,15 +1176,16 @@ static int bind_evtchn_to_irq_chip(evtchn_port_t evtchn, struct irq_chip *chip, { int irq; int ret; + struct irq_info *info; if (evtchn >= xen_evtchn_max_channels()) return -ENOMEM; mutex_lock(&irq_mapping_update_lock); - irq = get_evtchn_to_irq(evtchn); + info = evtchn_to_info(evtchn); - if (irq == -1) { + if (!info) { irq = xen_allocate_irq_dynamic(); if (irq < 0) goto out; @@ -1216,9 +1208,9 @@ static int bind_evtchn_to_irq_chip(evtchn_port_t evtchn, struct irq_chip *chip, */ bind_evtchn_to_cpu(evtchn, 0, false); } else { - struct irq_info *info = info_for_irq(irq); - if (!WARN_ON(!info || info->type != IRQT_EVTCHN)) + if (!WARN_ON(info->type != IRQT_EVTCHN)) info->refcnt++; + irq = info->irq; } out: @@ -1556,13 +1548,7 @@ EXPORT_SYMBOL_GPL(xen_set_irq_priority); int evtchn_make_refcounted(evtchn_port_t evtchn, bool is_static) { - int irq = get_evtchn_to_irq(evtchn); - struct irq_info *info; - - if (irq == -1) - return -ENOENT; - - info = info_for_irq(irq); + struct irq_info *info = evtchn_to_info(evtchn); if (!info) return -ENOENT; @@ -1578,7 +1564,6 @@ EXPORT_SYMBOL_GPL(evtchn_make_refcounted); int evtchn_get(evtchn_port_t evtchn) { - int irq; struct irq_info *info; int err = -ENOENT; @@ -1587,11 +1572,7 @@ int evtchn_get(evtchn_port_t evtchn) mutex_lock(&irq_mapping_update_lock); - irq = get_evtchn_to_irq(evtchn); - if (irq == -1) - goto done; - - info = info_for_irq(irq); + info = evtchn_to_info(evtchn); if (!info) goto done; @@ -1611,10 +1592,11 @@ EXPORT_SYMBOL_GPL(evtchn_get); void evtchn_put(evtchn_port_t evtchn) { - int irq = get_evtchn_to_irq(evtchn); - if (WARN_ON(irq == -1)) + struct irq_info *info = evtchn_to_info(evtchn); + + if (WARN_ON(!info)) return; - unbind_from_irq(irq); + unbind_from_irq(info->irq); } EXPORT_SYMBOL_GPL(evtchn_put); @@ -1644,12 +1626,10 @@ struct evtchn_loop_ctrl { void handle_irq_for_port(evtchn_port_t port, struct evtchn_loop_ctrl *ctrl) { - int irq; - struct irq_info *info; + struct irq_info *info = evtchn_to_info(port); struct xenbus_device *dev; - irq = get_evtchn_to_irq(port); - if (irq == -1) + if (!info) return; /* @@ -1674,7 +1654,6 @@ void handle_irq_for_port(evtchn_port_t port, struct evtchn_loop_ctrl *ctrl) } } - info = info_for_irq(irq); if (xchg_acquire(&info->is_active, 1)) return; @@ -1688,7 +1667,7 @@ void handle_irq_for_port(evtchn_port_t port, struct evtchn_loop_ctrl *ctrl) info->eoi_time = get_jiffies_64() + event_eoi_delay; } - generic_handle_irq(irq); + generic_handle_irq(info->irq); } int xen_evtchn_do_upcall(void) @@ -1746,7 +1725,7 @@ void rebind_evtchn_irq(evtchn_port_t evtchn, int irq) mutex_lock(&irq_mapping_update_lock); /* After resume the irq<->evtchn mappings are all cleared out */ - BUG_ON(get_evtchn_to_irq(evtchn) != -1); + BUG_ON(evtchn_to_info(evtchn)); /* Expect irq to have been bound before, so there should be a proper type */ BUG_ON(info->type == IRQT_UNBOUND); -- cgit v1.2.3 From 4b7b492615cf3017190f55444f7016812b66611d Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Mon, 13 Nov 2023 13:49:38 +0000 Subject: af_unix: fix use-after-free in unix_stream_read_actor() syzbot reported the following crash [1] After releasing unix socket lock, u->oob_skb can be changed by another thread. We must temporarily increase skb refcount to make sure this other thread will not free the skb under us. [1] BUG: KASAN: slab-use-after-free in unix_stream_read_actor+0xa7/0xc0 net/unix/af_unix.c:2866 Read of size 4 at addr ffff88801f3b9cc4 by task syz-executor107/5297 CPU: 1 PID: 5297 Comm: syz-executor107 Not tainted 6.6.0-syzkaller-15910-gb8e3a87a627b #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/09/2023 Call Trace: __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xd9/0x1b0 lib/dump_stack.c:106 print_address_description mm/kasan/report.c:364 [inline] print_report+0xc4/0x620 mm/kasan/report.c:475 kasan_report+0xda/0x110 mm/kasan/report.c:588 unix_stream_read_actor+0xa7/0xc0 net/unix/af_unix.c:2866 unix_stream_recv_urg net/unix/af_unix.c:2587 [inline] unix_stream_read_generic+0x19a5/0x2480 net/unix/af_unix.c:2666 unix_stream_recvmsg+0x189/0x1b0 net/unix/af_unix.c:2903 sock_recvmsg_nosec net/socket.c:1044 [inline] sock_recvmsg+0xe2/0x170 net/socket.c:1066 ____sys_recvmsg+0x21f/0x5c0 net/socket.c:2803 ___sys_recvmsg+0x115/0x1a0 net/socket.c:2845 __sys_recvmsg+0x114/0x1e0 net/socket.c:2875 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x3f/0x110 arch/x86/entry/common.c:82 entry_SYSCALL_64_after_hwframe+0x63/0x6b RIP: 0033:0x7fc67492c559 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 51 18 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fc6748ab228 EFLAGS: 00000246 ORIG_RAX: 000000000000002f RAX: ffffffffffffffda RBX: 000000000000001c RCX: 00007fc67492c559 RDX: 0000000040010083 RSI: 0000000020000140 RDI: 0000000000000004 RBP: 00007fc6749b6348 R08: 00007fc6748ab6c0 R09: 00007fc6748ab6c0 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fc6749b6340 R13: 00007fc6749b634c R14: 00007ffe9fac52a0 R15: 00007ffe9fac5388 Allocated by task 5295: kasan_save_stack+0x33/0x50 mm/kasan/common.c:45 kasan_set_track+0x25/0x30 mm/kasan/common.c:52 __kasan_slab_alloc+0x81/0x90 mm/kasan/common.c:328 kasan_slab_alloc include/linux/kasan.h:188 [inline] slab_post_alloc_hook mm/slab.h:763 [inline] slab_alloc_node mm/slub.c:3478 [inline] kmem_cache_alloc_node+0x180/0x3c0 mm/slub.c:3523 __alloc_skb+0x287/0x330 net/core/skbuff.c:641 alloc_skb include/linux/skbuff.h:1286 [inline] alloc_skb_with_frags+0xe4/0x710 net/core/skbuff.c:6331 sock_alloc_send_pskb+0x7e4/0x970 net/core/sock.c:2780 sock_alloc_send_skb include/net/sock.h:1884 [inline] queue_oob net/unix/af_unix.c:2147 [inline] unix_stream_sendmsg+0xb5f/0x10a0 net/unix/af_unix.c:2301 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0xd5/0x180 net/socket.c:745 ____sys_sendmsg+0x6ac/0x940 net/socket.c:2584 ___sys_sendmsg+0x135/0x1d0 net/socket.c:2638 __sys_sendmsg+0x117/0x1e0 net/socket.c:2667 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x3f/0x110 arch/x86/entry/common.c:82 entry_SYSCALL_64_after_hwframe+0x63/0x6b Freed by task 5295: kasan_save_stack+0x33/0x50 mm/kasan/common.c:45 kasan_set_track+0x25/0x30 mm/kasan/common.c:52 kasan_save_free_info+0x2b/0x40 mm/kasan/generic.c:522 ____kasan_slab_free mm/kasan/common.c:236 [inline] ____kasan_slab_free+0x15b/0x1b0 mm/kasan/common.c:200 kasan_slab_free include/linux/kasan.h:164 [inline] slab_free_hook mm/slub.c:1800 [inline] slab_free_freelist_hook+0x114/0x1e0 mm/slub.c:1826 slab_free mm/slub.c:3809 [inline] kmem_cache_free+0xf8/0x340 mm/slub.c:3831 kfree_skbmem+0xef/0x1b0 net/core/skbuff.c:1015 __kfree_skb net/core/skbuff.c:1073 [inline] consume_skb net/core/skbuff.c:1288 [inline] consume_skb+0xdf/0x170 net/core/skbuff.c:1282 queue_oob net/unix/af_unix.c:2178 [inline] unix_stream_sendmsg+0xd49/0x10a0 net/unix/af_unix.c:2301 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0xd5/0x180 net/socket.c:745 ____sys_sendmsg+0x6ac/0x940 net/socket.c:2584 ___sys_sendmsg+0x135/0x1d0 net/socket.c:2638 __sys_sendmsg+0x117/0x1e0 net/socket.c:2667 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x3f/0x110 arch/x86/entry/common.c:82 entry_SYSCALL_64_after_hwframe+0x63/0x6b The buggy address belongs to the object at ffff88801f3b9c80 which belongs to the cache skbuff_head_cache of size 240 The buggy address is located 68 bytes inside of freed 240-byte region [ffff88801f3b9c80, ffff88801f3b9d70) The buggy address belongs to the physical page: page:ffffea00007cee40 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1f3b9 flags: 0xfff00000000800(slab|node=0|zone=1|lastcpupid=0x7ff) page_type: 0xffffffff() raw: 00fff00000000800 ffff888142a60640 dead000000000122 0000000000000000 raw: 0000000000000000 00000000000c000c 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected page_owner tracks the page as allocated page last allocated via order 0, migratetype Unmovable, gfp_mask 0x12cc0(GFP_KERNEL|__GFP_NOWARN|__GFP_NORETRY), pid 5299, tgid 5283 (syz-executor107), ts 103803840339, free_ts 103600093431 set_page_owner include/linux/page_owner.h:31 [inline] post_alloc_hook+0x2cf/0x340 mm/page_alloc.c:1537 prep_new_page mm/page_alloc.c:1544 [inline] get_page_from_freelist+0xa25/0x36c0 mm/page_alloc.c:3312 __alloc_pages+0x1d0/0x4a0 mm/page_alloc.c:4568 alloc_pages_mpol+0x258/0x5f0 mm/mempolicy.c:2133 alloc_slab_page mm/slub.c:1870 [inline] allocate_slab+0x251/0x380 mm/slub.c:2017 new_slab mm/slub.c:2070 [inline] ___slab_alloc+0x8c7/0x1580 mm/slub.c:3223 __slab_alloc.constprop.0+0x56/0xa0 mm/slub.c:3322 __slab_alloc_node mm/slub.c:3375 [inline] slab_alloc_node mm/slub.c:3468 [inline] kmem_cache_alloc_node+0x132/0x3c0 mm/slub.c:3523 __alloc_skb+0x287/0x330 net/core/skbuff.c:641 alloc_skb include/linux/skbuff.h:1286 [inline] alloc_skb_with_frags+0xe4/0x710 net/core/skbuff.c:6331 sock_alloc_send_pskb+0x7e4/0x970 net/core/sock.c:2780 sock_alloc_send_skb include/net/sock.h:1884 [inline] queue_oob net/unix/af_unix.c:2147 [inline] unix_stream_sendmsg+0xb5f/0x10a0 net/unix/af_unix.c:2301 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0xd5/0x180 net/socket.c:745 ____sys_sendmsg+0x6ac/0x940 net/socket.c:2584 ___sys_sendmsg+0x135/0x1d0 net/socket.c:2638 __sys_sendmsg+0x117/0x1e0 net/socket.c:2667 page last free stack trace: reset_page_owner include/linux/page_owner.h:24 [inline] free_pages_prepare mm/page_alloc.c:1137 [inline] free_unref_page_prepare+0x4f8/0xa90 mm/page_alloc.c:2347 free_unref_page+0x33/0x3b0 mm/page_alloc.c:2487 __unfreeze_partials+0x21d/0x240 mm/slub.c:2655 qlink_free mm/kasan/quarantine.c:168 [inline] qlist_free_all+0x6a/0x170 mm/kasan/quarantine.c:187 kasan_quarantine_reduce+0x18e/0x1d0 mm/kasan/quarantine.c:294 __kasan_slab_alloc+0x65/0x90 mm/kasan/common.c:305 kasan_slab_alloc include/linux/kasan.h:188 [inline] slab_post_alloc_hook mm/slab.h:763 [inline] slab_alloc_node mm/slub.c:3478 [inline] slab_alloc mm/slub.c:3486 [inline] __kmem_cache_alloc_lru mm/slub.c:3493 [inline] kmem_cache_alloc+0x15d/0x380 mm/slub.c:3502 vm_area_dup+0x21/0x2f0 kernel/fork.c:500 __split_vma+0x17d/0x1070 mm/mmap.c:2365 split_vma mm/mmap.c:2437 [inline] vma_modify+0x25d/0x450 mm/mmap.c:2472 vma_modify_flags include/linux/mm.h:3271 [inline] mprotect_fixup+0x228/0xc80 mm/mprotect.c:635 do_mprotect_pkey+0x852/0xd60 mm/mprotect.c:809 __do_sys_mprotect mm/mprotect.c:830 [inline] __se_sys_mprotect mm/mprotect.c:827 [inline] __x64_sys_mprotect+0x78/0xb0 mm/mprotect.c:827 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x3f/0x110 arch/x86/entry/common.c:82 entry_SYSCALL_64_after_hwframe+0x63/0x6b Memory state around the buggy address: ffff88801f3b9b80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff88801f3b9c00: fb fb fb fb fb fb fc fc fc fc fc fc fc fc fc fc >ffff88801f3b9c80: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff88801f3b9d00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fc fc ffff88801f3b9d80: fc fc fc fc fc fc fc fc fa fb fb fb fb fb fb fb Fixes: 876c14ad014d ("af_unix: fix holding spinlock in oob handling") Reported-and-tested-by: syzbot+7a2d546fa43e49315ed3@syzkaller.appspotmail.com Signed-off-by: Eric Dumazet Cc: Rao Shoaib Reviewed-by: Rao shoaib Link: https://lore.kernel.org/r/20231113134938.168151-1-edumazet@google.com Signed-off-by: Paolo Abeni --- net/unix/af_unix.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/net/unix/af_unix.c b/net/unix/af_unix.c index 45506a95b25f..a357dc5f2404 100644 --- a/net/unix/af_unix.c +++ b/net/unix/af_unix.c @@ -2581,15 +2581,16 @@ static int unix_stream_recv_urg(struct unix_stream_read_state *state) if (!(state->flags & MSG_PEEK)) WRITE_ONCE(u->oob_skb, NULL); - + else + skb_get(oob_skb); unix_state_unlock(sk); chunk = state->recv_actor(oob_skb, 0, chunk, state); - if (!(state->flags & MSG_PEEK)) { + if (!(state->flags & MSG_PEEK)) UNIXCB(oob_skb).consumed += 1; - kfree_skb(oob_skb); - } + + consume_skb(oob_skb); mutex_unlock(&u->iolock); -- cgit v1.2.3 From d9995cd96928fa72963293fa5ca87350fed16930 Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Tue, 31 Oct 2023 08:42:40 +0000 Subject: hwmon: ltc2991: Fix spelling mistake "contiuous" -> "continuous" There is a spelling mistake in a dev_err_probe messages. Fix it. Signed-off-by: Colin Ian King Link: https://lore.kernel.org/r/20231031084240.2148339-1-colin.i.king@gmail.com Signed-off-by: Guenter Roeck --- drivers/hwmon/ltc2991.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/hwmon/ltc2991.c b/drivers/hwmon/ltc2991.c index bd63c61129a9..fc53fdcb2b6c 100644 --- a/drivers/hwmon/ltc2991.c +++ b/drivers/hwmon/ltc2991.c @@ -373,7 +373,7 @@ static int ltc2991_init(struct ltc2991_state *st) LTC2991_REPEAT_ACQ_EN); if (ret) return dev_err_probe(st->dev, ret, - "Error: Failed to set contiuous mode.\n"); + "Error: Failed to set continuous mode.\n"); /* Enable all channels and trigger conversions */ return regmap_write(st->regmap, LTC2991_CH_EN_TRIGGER, -- cgit v1.2.3 From 58ebe7fb6eb2deed0fd05cf57911fea3f36124eb Mon Sep 17 00:00:00 2001 From: Antoniu Miclaus Date: Tue, 31 Oct 2023 11:13:24 +0200 Subject: hwmon: max31827: include regulator header Include `linux/regulator/consumer.h` since the driver is using `devm_regulator_get_enable` function. Signed-off-by: Antoniu Miclaus Link: https://lore.kernel.org/r/20231031091324.23991-1-antoniu.miclaus@analog.com Signed-off-by: Guenter Roeck --- drivers/hwmon/max31827.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/hwmon/max31827.c b/drivers/hwmon/max31827.c index fd1fed1a797c..a1ce65145669 100644 --- a/drivers/hwmon/max31827.c +++ b/drivers/hwmon/max31827.c @@ -12,6 +12,7 @@ #include #include #include +#include #define MAX31827_T_REG 0x0 #define MAX31827_CONFIGURATION_REG 0x2 -- cgit v1.2.3 From edd48fd9d45370d6c8ba0dd834fcc51ff688cc87 Mon Sep 17 00:00:00 2001 From: Antonio Borneo Date: Tue, 7 Nov 2023 12:05:20 +0100 Subject: pinctrl: stm32: fix array read out of bound The existing code does not verify if the "tentative" index exceeds the size of the array, causing out of bound read. Issue identified with kasan. Check the index before using it. Signed-off-by: Antonio Borneo Fixes: 32c170ff15b0 ("pinctrl: stm32: set default gpio line names using pin names") Link: https://lore.kernel.org/r/20231107110520.4449-1-antonio.borneo@foss.st.com Signed-off-by: Linus Walleij --- drivers/pinctrl/stm32/pinctrl-stm32.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/pinctrl/stm32/pinctrl-stm32.c b/drivers/pinctrl/stm32/pinctrl-stm32.c index 3a9c458d3fc9..603f900e88c1 100644 --- a/drivers/pinctrl/stm32/pinctrl-stm32.c +++ b/drivers/pinctrl/stm32/pinctrl-stm32.c @@ -1273,9 +1273,11 @@ static struct stm32_desc_pin *stm32_pctrl_get_desc_pin_from_gpio(struct stm32_pi int i; /* With few exceptions (e.g. bank 'Z'), pin number matches with pin index in array */ - pin_desc = pctl->pins + stm32_pin_nb; - if (pin_desc->pin.number == stm32_pin_nb) - return pin_desc; + if (stm32_pin_nb < pctl->npins) { + pin_desc = pctl->pins + stm32_pin_nb; + if (pin_desc->pin.number == stm32_pin_nb) + return pin_desc; + } /* Otherwise, loop all array to find the pin with the right number */ for (i = 0; i < pctl->npins; i++) { -- cgit v1.2.3 From 08e8734d877a9a0fb8af1254a4ce58734fbef296 Mon Sep 17 00:00:00 2001 From: Chester Lin Date: Tue, 7 Nov 2023 22:10:44 +0800 Subject: pinctrl: s32cc: Avoid possible string truncation With "W=1" and "-Wformat-truncation" build options, the kernel test robot found a possible string truncation warning in pinctrl-s32cc.c, which uses an 8-byte char array to hold a memory region name "map%u". Since the maximum number of digits that a u32 value can present is 10, and the "map" string occupies 3 bytes with a termination '\0', which means the rest 4 bytes cannot fully present the integer "X" that exceeds 4 digits. Here we check if the number >= 10000, which is the lowest value that contains more than 4 digits. Reported-by: kernel test robot Closes: https://lore.kernel.org/oe-kbuild-all/202311030159.iyUGjNGF-lkp@intel.com/ Signed-off-by: Chester Lin Link: https://lore.kernel.org/r/20231107141044.24058-1-clin@suse.com Signed-off-by: Linus Walleij --- drivers/pinctrl/nxp/pinctrl-s32cc.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/pinctrl/nxp/pinctrl-s32cc.c b/drivers/pinctrl/nxp/pinctrl-s32cc.c index 7daff9f186cd..f0cad2c501f7 100644 --- a/drivers/pinctrl/nxp/pinctrl-s32cc.c +++ b/drivers/pinctrl/nxp/pinctrl-s32cc.c @@ -843,8 +843,8 @@ static int s32_pinctrl_probe_dt(struct platform_device *pdev, if (!np) return -ENODEV; - if (mem_regions == 0) { - dev_err(&pdev->dev, "mem_regions is 0\n"); + if (mem_regions == 0 || mem_regions >= 10000) { + dev_err(&pdev->dev, "mem_regions is invalid: %u\n", mem_regions); return -EINVAL; } -- cgit v1.2.3 From df572eba4e6211c6187fa81a0cc1199da1902f63 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Tue, 14 Nov 2023 14:30:04 +0100 Subject: pinctrl: cy8c95x0: Fix doc warning One member of struct cy8c95x0_pinctrl is missing kerneldoc, which leads to warnings. Reported-by: kernel test robot Closes: https://lore.kernel.org/oe-kbuild-all/202311031342.r4To3GaD-lkp@intel.com/ Signed-off-by: Linus Walleij Link: https://lore.kernel.org/r/20231114-cy8c95x0-doc-v1-1-31674103ad18@linaro.org --- drivers/pinctrl/pinctrl-cy8c95x0.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/pinctrl/pinctrl-cy8c95x0.c b/drivers/pinctrl/pinctrl-cy8c95x0.c index 04285c930e94..4ccfa99ed93a 100644 --- a/drivers/pinctrl/pinctrl-cy8c95x0.c +++ b/drivers/pinctrl/pinctrl-cy8c95x0.c @@ -143,6 +143,7 @@ static const struct dmi_system_id cy8c95x0_dmi_acpi_irq_info[] = { * @pinctrl_desc: pin controller description * @name: Chip controller name * @tpin: Total number of pins + * @gpio_reset: GPIO line handler that can reset the IC */ struct cy8c95x0_pinctrl { struct regmap *regmap; -- cgit v1.2.3 From 67059b61597c004e23b074547b40604222bee3a0 Mon Sep 17 00:00:00 2001 From: Yang Li Date: Wed, 1 Nov 2023 09:33:51 +0800 Subject: netfilter: nft_set_rbtree: Remove unused variable nft_net MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The code that uses nft_net has been removed, and the nft_pernet function is merely obtaining a reference to shared data through the net pointer. The content of the net pointer is not modified or changed, so both of them should be removed. silence the warning: net/netfilter/nft_set_rbtree.c:627:26: warning: variable ‘nft_net’ set but not used Reported-by: Abaci Robot Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=7103 Signed-off-by: Yang Li Reviewed-by: Simon Horman Signed-off-by: Pablo Neira Ayuso --- net/netfilter/nft_set_rbtree.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/net/netfilter/nft_set_rbtree.c b/net/netfilter/nft_set_rbtree.c index 6f1186abd47b..baa3fea4fe65 100644 --- a/net/netfilter/nft_set_rbtree.c +++ b/net/netfilter/nft_set_rbtree.c @@ -624,14 +624,12 @@ static void nft_rbtree_gc(struct nft_set *set) { struct nft_rbtree *priv = nft_set_priv(set); struct nft_rbtree_elem *rbe, *rbe_end = NULL; - struct nftables_pernet *nft_net; struct rb_node *node, *next; struct nft_trans_gc *gc; struct net *net; set = nft_set_container_of(priv); net = read_pnet(&set->net); - nft_net = nft_pernet(net); gc = nft_trans_gc_alloc(set, 0, GFP_KERNEL); if (!gc) -- cgit v1.2.3 From a44af08e3d4d7566eeea98d7a29fe06e7b9de944 Mon Sep 17 00:00:00 2001 From: Linkui Xiao Date: Wed, 1 Nov 2023 11:20:18 +0800 Subject: netfilter: nf_conntrack_bridge: initialize err to 0 K2CI reported a problem: consume_skb(skb); return err; [nf_br_ip_fragment() error] uninitialized symbol 'err'. err is not initialized, because returning 0 is expected, initialize err to 0. Fixes: 3c171f496ef5 ("netfilter: bridge: add connection tracking system") Reported-by: k2ci Signed-off-by: Linkui Xiao Signed-off-by: Pablo Neira Ayuso --- net/bridge/netfilter/nf_conntrack_bridge.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/bridge/netfilter/nf_conntrack_bridge.c b/net/bridge/netfilter/nf_conntrack_bridge.c index b5c406a6e765..abb090f94ed2 100644 --- a/net/bridge/netfilter/nf_conntrack_bridge.c +++ b/net/bridge/netfilter/nf_conntrack_bridge.c @@ -37,7 +37,7 @@ static int nf_br_ip_fragment(struct net *net, struct sock *sk, ktime_t tstamp = skb->tstamp; struct ip_frag_state state; struct iphdr *iph; - int err; + int err = 0; /* for offloaded checksums cleanup checksum before fragmentation */ if (skb->ip_summed == CHECKSUM_PARTIAL && -- cgit v1.2.3 From c301f0981fdd3fd1ffac6836b423c4d7a8e0eb63 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Fri, 3 Nov 2023 09:42:51 +0300 Subject: netfilter: nf_tables: fix pointer math issue in nft_byteorder_eval() The problem is in nft_byteorder_eval() where we are iterating through a loop and writing to dst[0], dst[1], dst[2] and so on... On each iteration we are writing 8 bytes. But dst[] is an array of u32 so each element only has space for 4 bytes. That means that every iteration overwrites part of the previous element. I spotted this bug while reviewing commit caf3ef7468f7 ("netfilter: nf_tables: prevent OOB access in nft_byteorder_eval") which is a related issue. I think that the reason we have not detected this bug in testing is that most of time we only write one element. Fixes: ce1e7989d989 ("netfilter: nft_byteorder: provide 64bit le/be conversion") Signed-off-by: Dan Carpenter Signed-off-by: Pablo Neira Ayuso --- include/net/netfilter/nf_tables.h | 4 ++-- net/netfilter/nft_byteorder.c | 5 +++-- net/netfilter/nft_meta.c | 2 +- 3 files changed, 6 insertions(+), 5 deletions(-) diff --git a/include/net/netfilter/nf_tables.h b/include/net/netfilter/nf_tables.h index 3bbd13ab1ecf..b157c5cafd14 100644 --- a/include/net/netfilter/nf_tables.h +++ b/include/net/netfilter/nf_tables.h @@ -178,9 +178,9 @@ static inline __be32 nft_reg_load_be32(const u32 *sreg) return *(__force __be32 *)sreg; } -static inline void nft_reg_store64(u32 *dreg, u64 val) +static inline void nft_reg_store64(u64 *dreg, u64 val) { - put_unaligned(val, (u64 *)dreg); + put_unaligned(val, dreg); } static inline u64 nft_reg_load64(const u32 *sreg) diff --git a/net/netfilter/nft_byteorder.c b/net/netfilter/nft_byteorder.c index e596d1a842f7..f6e791a68101 100644 --- a/net/netfilter/nft_byteorder.c +++ b/net/netfilter/nft_byteorder.c @@ -38,13 +38,14 @@ void nft_byteorder_eval(const struct nft_expr *expr, switch (priv->size) { case 8: { + u64 *dst64 = (void *)dst; u64 src64; switch (priv->op) { case NFT_BYTEORDER_NTOH: for (i = 0; i < priv->len / 8; i++) { src64 = nft_reg_load64(&src[i]); - nft_reg_store64(&dst[i], + nft_reg_store64(&dst64[i], be64_to_cpu((__force __be64)src64)); } break; @@ -52,7 +53,7 @@ void nft_byteorder_eval(const struct nft_expr *expr, for (i = 0; i < priv->len / 8; i++) { src64 = (__force __u64) cpu_to_be64(nft_reg_load64(&src[i])); - nft_reg_store64(&dst[i], src64); + nft_reg_store64(&dst64[i], src64); } break; } diff --git a/net/netfilter/nft_meta.c b/net/netfilter/nft_meta.c index f7da7c43333b..ba0d3683a45d 100644 --- a/net/netfilter/nft_meta.c +++ b/net/netfilter/nft_meta.c @@ -63,7 +63,7 @@ nft_meta_get_eval_time(enum nft_meta_keys key, { switch (key) { case NFT_META_TIME_NS: - nft_reg_store64(dest, ktime_get_real_ns()); + nft_reg_store64((u64 *)dest, ktime_get_real_ns()); break; case NFT_META_TIME_DAY: nft_reg_store8(dest, nft_meta_weekday()); -- cgit v1.2.3 From a7d5a955bfa854ac6b0c53aaf933394b4e6139e4 Mon Sep 17 00:00:00 2001 From: Pablo Neira Ayuso Date: Mon, 13 Nov 2023 20:34:56 +0100 Subject: netfilter: nf_tables: bogus ENOENT when destroying element which does not exist destroy element command bogusly reports ENOENT in case a set element does not exist. ENOENT errors are skipped, however, err is still set and propagated to userspace. # nft destroy element ip raw BLACKLIST { 1.2.3.4 } Error: Could not process rule: No such file or directory destroy element ip raw BLACKLIST { 1.2.3.4 } ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Fixes: f80a612dd77c ("netfilter: nf_tables: add support to destroy operation") Signed-off-by: Pablo Neira Ayuso --- net/netfilter/nf_tables_api.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/net/netfilter/nf_tables_api.c b/net/netfilter/nf_tables_api.c index a761ee6796f6..debea1c67701 100644 --- a/net/netfilter/nf_tables_api.c +++ b/net/netfilter/nf_tables_api.c @@ -7263,10 +7263,11 @@ static int nf_tables_delsetelem(struct sk_buff *skb, if (err < 0) { NL_SET_BAD_ATTR(extack, attr); - break; + return err; } } - return err; + + return 0; } /* -- cgit v1.2.3 From 28628fa952fefc7f2072ce6e8016968cc452b1ba Mon Sep 17 00:00:00 2001 From: Jozsef Kadlecsik Date: Mon, 13 Nov 2023 21:13:23 +0100 Subject: netfilter: ipset: fix race condition between swap/destroy and kernel side add/del/test Linkui Xiao reported that there's a race condition when ipset swap and destroy is called, which can lead to crash in add/del/test element operations. Swap then destroy are usual operations to replace a set with another one in a production system. The issue can in some cases be reproduced with the script: ipset create hash_ip1 hash:net family inet hashsize 1024 maxelem 1048576 ipset add hash_ip1 172.20.0.0/16 ipset add hash_ip1 192.168.0.0/16 iptables -A INPUT -m set --match-set hash_ip1 src -j ACCEPT while [ 1 ] do # ... Ongoing traffic... ipset create hash_ip2 hash:net family inet hashsize 1024 maxelem 1048576 ipset add hash_ip2 172.20.0.0/16 ipset swap hash_ip1 hash_ip2 ipset destroy hash_ip2 sleep 0.05 done In the race case the possible order of the operations are CPU0 CPU1 ip_set_test ipset swap hash_ip1 hash_ip2 ipset destroy hash_ip2 hash_net_kadt Swap replaces hash_ip1 with hash_ip2 and then destroy removes hash_ip2 which is the original hash_ip1. ip_set_test was called on hash_ip1 and because destroy removed it, hash_net_kadt crashes. The fix is to force ip_set_swap() to wait for all readers to finish accessing the old set pointers by calling synchronize_rcu(). The first version of the patch was written by Linkui Xiao . v2: synchronize_rcu() is moved into ip_set_swap() in order not to burden ip_set_destroy() unnecessarily when all sets are destroyed. v3: Florian Westphal pointed out that all netfilter hooks run with rcu_read_lock() held and em_ipset.c wraps the entire ip_set_test() in rcu read lock/unlock pair. So there's no need to extend the rcu read locked area in ipset itself. Closes: https://lore.kernel.org/all/69e7963b-e7f8-3ad0-210-7b86eebf7f78@netfilter.org/ Reported by: Linkui Xiao Signed-off-by: Jozsef Kadlecsik Signed-off-by: Pablo Neira Ayuso --- net/netfilter/ipset/ip_set_core.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/net/netfilter/ipset/ip_set_core.c b/net/netfilter/ipset/ip_set_core.c index 35d2f9c9ada0..4c133e06be1d 100644 --- a/net/netfilter/ipset/ip_set_core.c +++ b/net/netfilter/ipset/ip_set_core.c @@ -61,6 +61,8 @@ MODULE_ALIAS_NFNL_SUBSYS(NFNL_SUBSYS_IPSET); ip_set_dereference((inst)->ip_set_list)[id] #define ip_set_ref_netlink(inst,id) \ rcu_dereference_raw((inst)->ip_set_list)[id] +#define ip_set_dereference_nfnl(p) \ + rcu_dereference_check(p, lockdep_nfnl_is_held(NFNL_SUBSYS_IPSET)) /* The set types are implemented in modules and registered set types * can be found in ip_set_type_list. Adding/deleting types is @@ -708,15 +710,10 @@ __ip_set_put_netlink(struct ip_set *set) static struct ip_set * ip_set_rcu_get(struct net *net, ip_set_id_t index) { - struct ip_set *set; struct ip_set_net *inst = ip_set_pernet(net); - rcu_read_lock(); - /* ip_set_list itself needs to be protected */ - set = rcu_dereference(inst->ip_set_list)[index]; - rcu_read_unlock(); - - return set; + /* ip_set_list and the set pointer need to be protected */ + return ip_set_dereference_nfnl(inst->ip_set_list)[index]; } static inline void @@ -1397,6 +1394,9 @@ static int ip_set_swap(struct sk_buff *skb, const struct nfnl_info *info, ip_set(inst, to_id) = from; write_unlock_bh(&ip_set_ref_lock); + /* Make sure all readers of the old set pointers are completed. */ + synchronize_rcu(); + return 0; } -- cgit v1.2.3 From 8837ba3e58ea1e3d09ae36db80b1e80853aada95 Mon Sep 17 00:00:00 2001 From: Pablo Neira Ayuso Date: Mon, 13 Nov 2023 21:13:31 +0100 Subject: netfilter: nf_tables: split async and sync catchall in two functions list_for_each_entry_safe() does not work for the async case which runs under RCU, therefore, split GC logic for catchall in two functions instead, one for each of the sync and async GC variants. The catchall sync GC variant never sees a _DEAD bit set on ever, thus, this handling is removed in such case, moreover, allocate GC sync batch via GFP_KERNEL. Fixes: 93995bf4af2c ("netfilter: nf_tables: remove catchall element in GC sync path") Reported-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso --- net/netfilter/nf_tables_api.c | 55 +++++++++++++++++++++++-------------------- 1 file changed, 30 insertions(+), 25 deletions(-) diff --git a/net/netfilter/nf_tables_api.c b/net/netfilter/nf_tables_api.c index debea1c67701..c0a42989b982 100644 --- a/net/netfilter/nf_tables_api.c +++ b/net/netfilter/nf_tables_api.c @@ -9680,16 +9680,14 @@ void nft_trans_gc_queue_sync_done(struct nft_trans_gc *trans) call_rcu(&trans->rcu, nft_trans_gc_trans_free); } -static struct nft_trans_gc *nft_trans_gc_catchall(struct nft_trans_gc *gc, - unsigned int gc_seq, - bool sync) +struct nft_trans_gc *nft_trans_gc_catchall_async(struct nft_trans_gc *gc, + unsigned int gc_seq) { - struct nft_set_elem_catchall *catchall, *next; + struct nft_set_elem_catchall *catchall; const struct nft_set *set = gc->set; - struct nft_elem_priv *elem_priv; struct nft_set_ext *ext; - list_for_each_entry_safe(catchall, next, &set->catchall_list, list) { + list_for_each_entry_rcu(catchall, &set->catchall_list, list) { ext = nft_set_elem_ext(set, catchall->elem); if (!nft_set_elem_expired(ext)) @@ -9699,35 +9697,42 @@ static struct nft_trans_gc *nft_trans_gc_catchall(struct nft_trans_gc *gc, nft_set_elem_dead(ext); dead_elem: - if (sync) - gc = nft_trans_gc_queue_sync(gc, GFP_ATOMIC); - else - gc = nft_trans_gc_queue_async(gc, gc_seq, GFP_ATOMIC); - + gc = nft_trans_gc_queue_async(gc, gc_seq, GFP_ATOMIC); if (!gc) return NULL; - elem_priv = catchall->elem; - if (sync) { - nft_setelem_data_deactivate(gc->net, gc->set, elem_priv); - nft_setelem_catchall_destroy(catchall); - } - - nft_trans_gc_elem_add(gc, elem_priv); + nft_trans_gc_elem_add(gc, catchall->elem); } return gc; } -struct nft_trans_gc *nft_trans_gc_catchall_async(struct nft_trans_gc *gc, - unsigned int gc_seq) -{ - return nft_trans_gc_catchall(gc, gc_seq, false); -} - struct nft_trans_gc *nft_trans_gc_catchall_sync(struct nft_trans_gc *gc) { - return nft_trans_gc_catchall(gc, 0, true); + struct nft_set_elem_catchall *catchall, *next; + const struct nft_set *set = gc->set; + struct nft_elem_priv *elem_priv; + struct nft_set_ext *ext; + + WARN_ON_ONCE(!lockdep_commit_lock_is_held(gc->net)); + + list_for_each_entry_safe(catchall, next, &set->catchall_list, list) { + ext = nft_set_elem_ext(set, catchall->elem); + + if (!nft_set_elem_expired(ext)) + continue; + + gc = nft_trans_gc_queue_sync(gc, GFP_KERNEL); + if (!gc) + return NULL; + + elem_priv = catchall->elem; + nft_setelem_data_deactivate(gc->net, gc->set, elem_priv); + nft_setelem_catchall_destroy(catchall); + nft_trans_gc_elem_add(gc, elem_priv); + } + + return gc; } static void nf_tables_module_autoload_cleanup(struct net *net) -- cgit v1.2.3 From 174925d340aac55296318e43fd96c0e1d196e105 Mon Sep 17 00:00:00 2001 From: Adrian Hunter Date: Fri, 3 Nov 2023 10:47:15 +0200 Subject: mmc: block: Do not lose cache flush during CQE error recovery During CQE error recovery, error-free data commands get requeued if there is any data left to transfer, but non-data commands are completed even though they have not been processed. Requeue them instead. Note the only non-data command is cache flush, which would have resulted in a cache flush being lost if it was queued at the time of CQE recovery. Fixes: 1e8e55b67030 ("mmc: block: Add CQE support") Cc: stable@vger.kernel.org Signed-off-by: Adrian Hunter Reviewed-by: Avri Altman Link: https://lore.kernel.org/r/20231103084720.6886-2-adrian.hunter@intel.com Signed-off-by: Ulf Hansson --- drivers/mmc/core/block.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/mmc/core/block.c b/drivers/mmc/core/block.c index 152dfe593c43..f9a5cffa64b1 100644 --- a/drivers/mmc/core/block.c +++ b/drivers/mmc/core/block.c @@ -1482,6 +1482,8 @@ static void mmc_blk_cqe_complete_rq(struct mmc_queue *mq, struct request *req) blk_mq_requeue_request(req, true); else __blk_mq_end_request(req, BLK_STS_OK); + } else if (mq->in_recovery) { + blk_mq_requeue_request(req, true); } else { blk_mq_end_request(req, BLK_STS_OK); } -- cgit v1.2.3 From b578d5d18e929aa7c007a98cce32657145dde219 Mon Sep 17 00:00:00 2001 From: Adrian Hunter Date: Fri, 3 Nov 2023 10:47:16 +0200 Subject: mmc: cqhci: Increase recovery halt timeout Failing to halt complicates the recovery. Additionally, unless the card or controller are stuck, which is expected to be very rare, then the halt should succeed, so it is better to wait. Set a large timeout. Fixes: a4080225f51d ("mmc: cqhci: support for command queue enabled host") Cc: stable@vger.kernel.org Signed-off-by: Adrian Hunter Reviewed-by: Avri Altman Link: https://lore.kernel.org/r/20231103084720.6886-3-adrian.hunter@intel.com Signed-off-by: Ulf Hansson --- drivers/mmc/host/cqhci-core.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/mmc/host/cqhci-core.c b/drivers/mmc/host/cqhci-core.c index b3d7d6d8d654..15f5a069af1f 100644 --- a/drivers/mmc/host/cqhci-core.c +++ b/drivers/mmc/host/cqhci-core.c @@ -984,10 +984,10 @@ static bool cqhci_halt(struct mmc_host *mmc, unsigned int timeout) /* * After halting we expect to be able to use the command line. We interpret the * failure to halt to mean the data lines might still be in use (and the upper - * layers will need to send a STOP command), so we set the timeout based on a - * generous command timeout. + * layers will need to send a STOP command), however failing to halt complicates + * the recovery, so set a timeout that would reasonably allow I/O to complete. */ -#define CQHCI_START_HALT_TIMEOUT 5 +#define CQHCI_START_HALT_TIMEOUT 500 static void cqhci_recovery_start(struct mmc_host *mmc) { -- cgit v1.2.3 From c616696a902987352426fdaeec1b0b3240949e6b Mon Sep 17 00:00:00 2001 From: Adrian Hunter Date: Fri, 3 Nov 2023 10:47:17 +0200 Subject: mmc: block: Be sure to wait while busy in CQE error recovery STOP command does not guarantee to wait while busy, but subsequent command MMC_CMDQ_TASK_MGMT to discard the queue will fail if the card is busy, so be sure to wait by employing mmc_poll_for_busy(). Fixes: 72a5af554df8 ("mmc: core: Add support for handling CQE requests") Cc: stable@vger.kernel.org Signed-off-by: Adrian Hunter Reviewed-by: Avri Altman Reviewed-by: Christian Loehle Link: https://lore.kernel.org/r/20231103084720.6886-4-adrian.hunter@intel.com Signed-off-by: Ulf Hansson --- drivers/mmc/core/core.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c index 3d3e0ca52614..befde2bd26d3 100644 --- a/drivers/mmc/core/core.c +++ b/drivers/mmc/core/core.c @@ -553,6 +553,8 @@ int mmc_cqe_recovery(struct mmc_host *host) cmd.busy_timeout = MMC_CQE_RECOVERY_TIMEOUT; mmc_wait_for_cmd(host, &cmd, 0); + mmc_poll_for_busy(host->card, MMC_CQE_RECOVERY_TIMEOUT, true, MMC_BUSY_IO); + memset(&cmd, 0, sizeof(cmd)); cmd.opcode = MMC_CMDQ_TASK_MGMT; cmd.arg = 1; /* Discard entire queue */ -- cgit v1.2.3 From 8155d1fa3a747baad5caff5f8303321d68ddd48c Mon Sep 17 00:00:00 2001 From: Adrian Hunter Date: Fri, 3 Nov 2023 10:47:18 +0200 Subject: mmc: block: Retry commands in CQE error recovery It is important that MMC_CMDQ_TASK_MGMT command to discard the queue is successful because otherwise a subsequent reset might fail to flush the cache first. Retry it and the previous STOP command. Fixes: 72a5af554df8 ("mmc: core: Add support for handling CQE requests") Cc: stable@vger.kernel.org Signed-off-by: Adrian Hunter Reviewed-by: Avri Altman Link: https://lore.kernel.org/r/20231103084720.6886-5-adrian.hunter@intel.com Signed-off-by: Ulf Hansson --- drivers/mmc/core/core.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c index befde2bd26d3..a8c17b4cd737 100644 --- a/drivers/mmc/core/core.c +++ b/drivers/mmc/core/core.c @@ -551,7 +551,7 @@ int mmc_cqe_recovery(struct mmc_host *host) cmd.flags = MMC_RSP_R1B | MMC_CMD_AC; cmd.flags &= ~MMC_RSP_CRC; /* Ignore CRC */ cmd.busy_timeout = MMC_CQE_RECOVERY_TIMEOUT; - mmc_wait_for_cmd(host, &cmd, 0); + mmc_wait_for_cmd(host, &cmd, MMC_CMD_RETRIES); mmc_poll_for_busy(host->card, MMC_CQE_RECOVERY_TIMEOUT, true, MMC_BUSY_IO); @@ -561,10 +561,13 @@ int mmc_cqe_recovery(struct mmc_host *host) cmd.flags = MMC_RSP_R1B | MMC_CMD_AC; cmd.flags &= ~MMC_RSP_CRC; /* Ignore CRC */ cmd.busy_timeout = MMC_CQE_RECOVERY_TIMEOUT; - err = mmc_wait_for_cmd(host, &cmd, 0); + err = mmc_wait_for_cmd(host, &cmd, MMC_CMD_RETRIES); host->cqe_ops->cqe_recovery_finish(host); + if (err) + err = mmc_wait_for_cmd(host, &cmd, MMC_CMD_RETRIES); + mmc_retune_release(host); return err; -- cgit v1.2.3 From 35597bdb04ec27ef3b1cea007dc69f8ff5df75a5 Mon Sep 17 00:00:00 2001 From: Adrian Hunter Date: Fri, 3 Nov 2023 10:47:19 +0200 Subject: mmc: cqhci: Warn of halt or task clear failure A correctly operating controller should successfully halt and clear tasks. Failure may result in errors elsewhere, so promote messages from debug to warnings. Fixes: a4080225f51d ("mmc: cqhci: support for command queue enabled host") Cc: stable@vger.kernel.org Signed-off-by: Adrian Hunter Reviewed-by: Avri Altman Reviewed-by: Avri Altman Link: https://lore.kernel.org/r/20231103084720.6886-6-adrian.hunter@intel.com Signed-off-by: Ulf Hansson --- drivers/mmc/host/cqhci-core.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/mmc/host/cqhci-core.c b/drivers/mmc/host/cqhci-core.c index 15f5a069af1f..948799a0980c 100644 --- a/drivers/mmc/host/cqhci-core.c +++ b/drivers/mmc/host/cqhci-core.c @@ -942,8 +942,8 @@ static bool cqhci_clear_all_tasks(struct mmc_host *mmc, unsigned int timeout) ret = cqhci_tasks_cleared(cq_host); if (!ret) - pr_debug("%s: cqhci: Failed to clear tasks\n", - mmc_hostname(mmc)); + pr_warn("%s: cqhci: Failed to clear tasks\n", + mmc_hostname(mmc)); return ret; } @@ -976,7 +976,7 @@ static bool cqhci_halt(struct mmc_host *mmc, unsigned int timeout) ret = cqhci_halted(cq_host); if (!ret) - pr_debug("%s: cqhci: Failed to halt\n", mmc_hostname(mmc)); + pr_warn("%s: cqhci: Failed to halt\n", mmc_hostname(mmc)); return ret; } -- cgit v1.2.3 From 1de1b77982e1a1df9707cb11f9b1789e6b8919d4 Mon Sep 17 00:00:00 2001 From: Adrian Hunter Date: Fri, 3 Nov 2023 10:47:20 +0200 Subject: mmc: cqhci: Fix task clearing in CQE error recovery MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit If a task completion notification (TCN) is received when there is no outstanding task, the cqhci driver issues a "spurious TCN" warning. This was observed to happen right after CQE error recovery. When an error interrupt is received the driver runs recovery logic. It halts the controller, clears all pending tasks, and then re-enables it. On some platforms, like Intel Jasper Lake, a stale task completion event was observed, regardless of the CQHCI_CLEAR_ALL_TASKS bit being set. This results in either: a) Spurious TC completion event for an empty slot. b) Corrupted data being passed up the stack, as a result of premature completion for a newly added task. Rather than add a quirk for affected controllers, ensure tasks are cleared by toggling CQHCI_ENABLE, which would happen anyway if cqhci_clear_all_tasks() timed out. This is simpler and should be safe and effective for all controllers. Fixes: a4080225f51d ("mmc: cqhci: support for command queue enabled host") Cc: stable@vger.kernel.org Reported-by: Kornel Dulęba Tested-by: Kornel Dulęba Co-developed-by: Kornel Dulęba Signed-off-by: Kornel Dulęba Signed-off-by: Adrian Hunter Reviewed-by: Avri Altman Link: https://lore.kernel.org/r/20231103084720.6886-7-adrian.hunter@intel.com Signed-off-by: Ulf Hansson --- drivers/mmc/host/cqhci-core.c | 32 ++++++++++++++++---------------- 1 file changed, 16 insertions(+), 16 deletions(-) diff --git a/drivers/mmc/host/cqhci-core.c b/drivers/mmc/host/cqhci-core.c index 948799a0980c..41e94cd14109 100644 --- a/drivers/mmc/host/cqhci-core.c +++ b/drivers/mmc/host/cqhci-core.c @@ -1075,28 +1075,28 @@ static void cqhci_recovery_finish(struct mmc_host *mmc) ok = cqhci_halt(mmc, CQHCI_FINISH_HALT_TIMEOUT); - if (!cqhci_clear_all_tasks(mmc, CQHCI_CLEAR_TIMEOUT)) - ok = false; - /* * The specification contradicts itself, by saying that tasks cannot be * cleared if CQHCI does not halt, but if CQHCI does not halt, it should * be disabled/re-enabled, but not to disable before clearing tasks. * Have a go anyway. */ - if (!ok) { - pr_debug("%s: cqhci: disable / re-enable\n", mmc_hostname(mmc)); - cqcfg = cqhci_readl(cq_host, CQHCI_CFG); - cqcfg &= ~CQHCI_ENABLE; - cqhci_writel(cq_host, cqcfg, CQHCI_CFG); - cqcfg |= CQHCI_ENABLE; - cqhci_writel(cq_host, cqcfg, CQHCI_CFG); - /* Be sure that there are no tasks */ - ok = cqhci_halt(mmc, CQHCI_FINISH_HALT_TIMEOUT); - if (!cqhci_clear_all_tasks(mmc, CQHCI_CLEAR_TIMEOUT)) - ok = false; - WARN_ON(!ok); - } + if (!cqhci_clear_all_tasks(mmc, CQHCI_CLEAR_TIMEOUT)) + ok = false; + + /* Disable to make sure tasks really are cleared */ + cqcfg = cqhci_readl(cq_host, CQHCI_CFG); + cqcfg &= ~CQHCI_ENABLE; + cqhci_writel(cq_host, cqcfg, CQHCI_CFG); + + cqcfg = cqhci_readl(cq_host, CQHCI_CFG); + cqcfg |= CQHCI_ENABLE; + cqhci_writel(cq_host, cqcfg, CQHCI_CFG); + + cqhci_halt(mmc, CQHCI_FINISH_HALT_TIMEOUT); + + if (!ok) + cqhci_clear_all_tasks(mmc, CQHCI_CLEAR_TIMEOUT); cqhci_recover_mrqs(cq_host); -- cgit v1.2.3 From b944aa9d86d5f782bfe5e51336434c960304839c Mon Sep 17 00:00:00 2001 From: Matus Malych Date: Tue, 14 Nov 2023 14:35:25 +0100 Subject: ALSA: hda/realtek: Enable Mute LED on HP 255 G10 HP 255 G10 has a mute LED that can be made to work using quirk ALC236_FIXUP_HP_MUTE_LED_COEFBIT2. Enable already existing quirk - at correct line to keep order Signed-off-by: Matus Malych Cc: Link: https://lore.kernel.org/r/20231114133524.11340-1-matus@malych.org Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index cdd808e02b44..3c85b8247c11 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -9868,6 +9868,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x103c, 0x8abb, "HP ZBook Firefly 14 G9", ALC245_FIXUP_CS35L41_SPI_2_HP_GPIO_LED), SND_PCI_QUIRK(0x103c, 0x8ad1, "HP EliteBook 840 14 inch G9 Notebook PC", ALC245_FIXUP_CS35L41_SPI_2_HP_GPIO_LED), SND_PCI_QUIRK(0x103c, 0x8ad2, "HP EliteBook 860 16 inch G9 Notebook PC", ALC245_FIXUP_CS35L41_SPI_2_HP_GPIO_LED), + SND_PCI_QUIRK(0x103c, 0x8b2f, "HP 255 15.6 inch G10 Notebook PC", ALC236_FIXUP_HP_MUTE_LED_COEFBIT2), SND_PCI_QUIRK(0x103c, 0x8b42, "HP", ALC245_FIXUP_CS35L41_SPI_2_HP_GPIO_LED), SND_PCI_QUIRK(0x103c, 0x8b43, "HP", ALC245_FIXUP_CS35L41_SPI_2_HP_GPIO_LED), SND_PCI_QUIRK(0x103c, 0x8b44, "HP", ALC245_FIXUP_CS35L41_SPI_2_HP_GPIO_LED), -- cgit v1.2.3 From 2e6ef8aaba6b709ce91164401fa1c12668510360 Mon Sep 17 00:00:00 2001 From: Bob Peterson Date: Tue, 14 Nov 2023 07:57:53 -0600 Subject: Remove myself as maintainer of GFS2 I am retiring from Red Hat and will no longer be a maintainer of the gfs2 file system. Signed-off-by: Bob Peterson Signed-off-by: Linus Torvalds --- MAINTAINERS | 1 - 1 file changed, 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index 97f51d5ec1cf..5c9f868e13b6 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -8950,7 +8950,6 @@ S: Maintained F: scripts/get_maintainer.pl GFS2 FILE SYSTEM -M: Bob Peterson M: Andreas Gruenbacher L: gfs2@lists.linux.dev S: Supported -- cgit v1.2.3 From 782ce431613cf08c3a00dca42ad925c3b1108d09 Mon Sep 17 00:00:00 2001 From: Konstantin Runov Date: Mon, 30 Oct 2023 12:45:08 +0300 Subject: gcc-plugins: latent_entropy: Fix typo (args -> argc) in plugin description Fix the typo in the plugin description comment. Clearly, "argc" should be used. Signed-off-by: Konstantin Runov Link: https://lore.kernel.org/r/20231030094508.245432-1-runebone1@gmail.com Signed-off-by: Kees Cook --- scripts/gcc-plugins/latent_entropy_plugin.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/scripts/gcc-plugins/latent_entropy_plugin.c b/scripts/gcc-plugins/latent_entropy_plugin.c index 39e86be60dd2..ff0b192be91f 100644 --- a/scripts/gcc-plugins/latent_entropy_plugin.c +++ b/scripts/gcc-plugins/latent_entropy_plugin.c @@ -17,7 +17,7 @@ * if (argc <= 1) * printf("%s: no command arguments :(\n", *argv); * else - * printf("%s: %d command arguments!\n", *argv, args - 1); + * printf("%s: %d command arguments!\n", *argv, argc - 1); * } * * after: @@ -47,7 +47,7 @@ * // perturb_local_entropy() * } else { * local_entropy ^= 3896280633962944730; - * printf("%s: %d command arguments!\n", *argv, args - 1); + * printf("%s: %d command arguments!\n", *argv, argc - 1); * } * * // latent_entropy_execute() 4. -- cgit v1.2.3 From 29954d5b1e0d67a4cd61c30c2201030c97e94b1e Mon Sep 17 00:00:00 2001 From: Shyam Prasad N Date: Tue, 14 Nov 2023 04:54:12 +0000 Subject: cifs: fix leak of iface for primary channel My last change in this area introduced a change which accounted for primary channel in the interface ref count. However, it did not reduce this ref count on deallocation of the primary channel. i.e. during umount. Fixing this leak here, by dropping this ref count for primary channel while freeing up the session. Fixes: fa1d0508bdd4 ("cifs: account for primary channel in the interface list") Cc: stable@vger.kernel.org Reported-by: Paulo Alcantara Signed-off-by: Shyam Prasad N Signed-off-by: Steve French --- fs/smb/client/connect.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/fs/smb/client/connect.c b/fs/smb/client/connect.c index 57c2a7df3457..f896f60c924b 100644 --- a/fs/smb/client/connect.c +++ b/fs/smb/client/connect.c @@ -2065,6 +2065,12 @@ void __cifs_put_smb_ses(struct cifs_ses *ses) ses->chans[i].server = NULL; } + /* we now account for primary channel in iface->refcount */ + if (ses->chans[0].iface) { + kref_put(&ses->chans[0].iface->refcount, release_iface); + ses->chans[0].server = NULL; + } + sesInfoFree(ses); cifs_put_tcp_session(server, 0); } -- cgit v1.2.3 From 5eef12c4e3230f2025dc46ad8c4a3bc19978e5d7 Mon Sep 17 00:00:00 2001 From: Shyam Prasad N Date: Tue, 14 Nov 2023 04:58:23 +0000 Subject: cifs: fix lock ordering while disabling multichannel The code to handle the case of server disabling multichannel was picking iface_lock with chan_lock held. This goes against the lock ordering rules, as iface_lock is a higher order lock (even if it isn't so obvious). This change fixes the lock ordering by doing the following in that order for each secondary channel: 1. store iface and server pointers in local variable 2. remove references to iface and server in channels 3. unlock chan_lock 4. lock iface_lock 5. dec ref count for iface 6. unlock iface_lock 7. dec ref count for server 8. lock chan_lock again Since this function can only be called in smb2_reconnect, and that cannot be called by two parallel processes, we should not have races due to dropping chan_lock between steps 3 and 8. Fixes: ee1d21794e55 ("cifs: handle when server stops supporting multichannel") Reported-by: Paulo Alcantara Signed-off-by: Shyam Prasad N Signed-off-by: Steve French --- fs/smb/client/sess.c | 22 +++++++++++++--------- 1 file changed, 13 insertions(+), 9 deletions(-) diff --git a/fs/smb/client/sess.c b/fs/smb/client/sess.c index 0bb2ac929061..8b2d7c1ca428 100644 --- a/fs/smb/client/sess.c +++ b/fs/smb/client/sess.c @@ -322,28 +322,32 @@ cifs_disable_secondary_channels(struct cifs_ses *ses) iface = ses->chans[i].iface; server = ses->chans[i].server; + /* + * remove these references first, since we need to unlock + * the chan_lock here, since iface_lock is a higher lock + */ + ses->chans[i].iface = NULL; + ses->chans[i].server = NULL; + spin_unlock(&ses->chan_lock); + if (iface) { spin_lock(&ses->iface_lock); kref_put(&iface->refcount, release_iface); - ses->chans[i].iface = NULL; iface->num_channels--; if (iface->weight_fulfilled) iface->weight_fulfilled--; spin_unlock(&ses->iface_lock); } - spin_unlock(&ses->chan_lock); - if (server && !server->terminate) { - server->terminate = true; - cifs_signal_cifsd_for_reconnect(server, false); - } - spin_lock(&ses->chan_lock); - if (server) { - ses->chans[i].server = NULL; + if (!server->terminate) { + server->terminate = true; + cifs_signal_cifsd_for_reconnect(server, false); + } cifs_put_tcp_session(server, false); } + spin_lock(&ses->chan_lock); } done: -- cgit v1.2.3 From 80aea01c48971a1fffc0252d036995572d84950d Mon Sep 17 00:00:00 2001 From: Claudio Imbrenda Date: Thu, 2 Nov 2023 16:35:49 +0100 Subject: KVM: s390: vsie: fix wrong VIR 37 when MSO is used When the host invalidates a guest page, it will also check if the page was used to map the prefix of any guest CPUs, in which case they are stopped and marked as needing a prefix refresh. Upon starting the affected CPUs again, their prefix pages are explicitly faulted in and revalidated if they had been invalidated. A bit in the PGSTEs indicates whether or not a page might contain a prefix. The bit is allowed to overindicate. Pages above 2G are skipped, because they cannot be prefixes, since KVM runs all guests with MSO = 0. The same applies for nested guests (VSIE). When the host invalidates a guest page that maps the prefix of the nested guest, it has to stop the affected nested guest CPUs and mark them as needing a prefix refresh. The same PGSTE bit used for the guest prefix is also used for the nested guest. Pages above 2G are skipped like for normal guests, which is the source of the bug. The nested guest runs is the guest primary address space. The guest could be running the nested guest using MSO != 0. If the MSO + prefix for the nested guest is above 2G, the check for nested prefix will skip it. This will cause the invalidation notifier to not stop the CPUs of the nested guest and not mark them as needing refresh. When the nested guest is run again, its prefix will not be refreshed, since it has not been marked for refresh. This will cause a fatal validity intercept with VIR code 37. Fix this by removing the check for 2G for nested guests. Now all invalidations of pages with the notify bit set will always scan the existing VSIE shadow state descriptors. This allows to catch invalidations of nested guest prefix mappings even when the prefix is above 2G in the guest virtual address space. Fixes: a3508fbe9dc6 ("KVM: s390: vsie: initial support for nested virtualization") Tested-by: Nico Boehr Reviewed-by: Nico Boehr Reviewed-by: David Hildenbrand Message-ID: <20231102153549.53984-1-imbrenda@linux.ibm.com> Signed-off-by: Claudio Imbrenda --- arch/s390/kvm/vsie.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/arch/s390/kvm/vsie.c b/arch/s390/kvm/vsie.c index 02dcbe82a8e5..8207a892bbe2 100644 --- a/arch/s390/kvm/vsie.c +++ b/arch/s390/kvm/vsie.c @@ -587,10 +587,6 @@ void kvm_s390_vsie_gmap_notifier(struct gmap *gmap, unsigned long start, if (!gmap_is_shadow(gmap)) return; - if (start >= 1UL << 31) - /* We are only interested in prefix pages */ - return; - /* * Only new shadow blocks are added to the list during runtime, * therefore we can safely reference them all the time. -- cgit v1.2.3 From 27072b8e18a73ffeffb1c140939023915a35134b Mon Sep 17 00:00:00 2001 From: Claudio Imbrenda Date: Thu, 9 Nov 2023 13:36:24 +0100 Subject: KVM: s390/mm: Properly reset no-dat When the CMMA state needs to be reset, the no-dat bit also needs to be reset. Failure to do so could cause issues in the guest, since the guest expects the bit to be cleared after a reset. Cc: Reviewed-by: Nico Boehr Message-ID: <20231109123624.37314-1-imbrenda@linux.ibm.com> Signed-off-by: Claudio Imbrenda --- arch/s390/mm/pgtable.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/s390/mm/pgtable.c b/arch/s390/mm/pgtable.c index 3bd2ab2a9a34..5cb92941540b 100644 --- a/arch/s390/mm/pgtable.c +++ b/arch/s390/mm/pgtable.c @@ -756,7 +756,7 @@ void ptep_zap_unused(struct mm_struct *mm, unsigned long addr, pte_clear(mm, addr, ptep); } if (reset) - pgste_val(pgste) &= ~_PGSTE_GPS_USAGE_MASK; + pgste_val(pgste) &= ~(_PGSTE_GPS_USAGE_MASK | _PGSTE_GPS_NODAT); pgste_set_unlock(ptep, pgste); preempt_enable(); } -- cgit v1.2.3 From f8f2847f739dc899d0e563eac01299dadefa64ff Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Thu, 26 Oct 2023 10:59:31 +0200 Subject: kunit: Warn if tests are slow Kunit recently gained support to setup attributes, the first one being the speed of a given test, then allowing to filter out slow tests. A slow test is defined in the documentation as taking more than one second. There's an another speed attribute called "super slow" but whose definition is less clear. Add support to the test runner to check the test execution time, and report tests that should be marked as slow but aren't. Signed-off-by: Maxime Ripard Reviewed-by: David Gow Signed-off-by: Shuah Khan --- lib/kunit/test.c | 38 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 38 insertions(+) diff --git a/lib/kunit/test.c b/lib/kunit/test.c index f2eb71f1a66c..d70fb799eb95 100644 --- a/lib/kunit/test.c +++ b/lib/kunit/test.c @@ -338,6 +338,36 @@ void kunit_init_test(struct kunit *test, const char *name, struct string_stream } EXPORT_SYMBOL_GPL(kunit_init_test); +/* Only warn when a test takes more than twice the threshold */ +#define KUNIT_SPEED_WARNING_MULTIPLIER 2 + +/* Slow tests are defined as taking more than 1s */ +#define KUNIT_SPEED_SLOW_THRESHOLD_S 1 + +#define KUNIT_SPEED_SLOW_WARNING_THRESHOLD_S \ + (KUNIT_SPEED_WARNING_MULTIPLIER * KUNIT_SPEED_SLOW_THRESHOLD_S) + +#define s_to_timespec64(s) ns_to_timespec64((s) * NSEC_PER_SEC) + +static void kunit_run_case_check_speed(struct kunit *test, + struct kunit_case *test_case, + struct timespec64 duration) +{ + struct timespec64 slow_thr = + s_to_timespec64(KUNIT_SPEED_SLOW_WARNING_THRESHOLD_S); + enum kunit_speed speed = test_case->attr.speed; + + if (timespec64_compare(&duration, &slow_thr) < 0) + return; + + if (speed == KUNIT_SPEED_VERY_SLOW || speed == KUNIT_SPEED_SLOW) + return; + + kunit_warn(test, + "Test should be marked slow (runtime: %lld.%09lds)", + duration.tv_sec, duration.tv_nsec); +} + /* * Initializes and runs test case. Does not clean up or do post validations. */ @@ -345,6 +375,8 @@ static void kunit_run_case_internal(struct kunit *test, struct kunit_suite *suite, struct kunit_case *test_case) { + struct timespec64 start, end; + if (suite->init) { int ret; @@ -356,7 +388,13 @@ static void kunit_run_case_internal(struct kunit *test, } } + ktime_get_ts64(&start); + test_case->run_case(test); + + ktime_get_ts64(&end); + + kunit_run_case_check_speed(test, test_case, timespec64_sub(end, start)); } static void kunit_case_internal_cleanup(struct kunit *test) -- cgit v1.2.3 From 2e3c94aed51eabbe9c1c0ee515371ea5441c2fa7 Mon Sep 17 00:00:00 2001 From: Michal Wajdeczko Date: Wed, 4 Oct 2023 22:57:00 +0200 Subject: kunit: Reset suite counter right before running tests Today we reset the suite counter as part of the suite cleanup, called from the module exit callback, but it might not work that well as one can try to collect results without unloading a previous test (either unintentionally or due to dependencies). For easy reproduction try to load the kunit-test.ko and then collect and parse results from the kunit-example-test.ko load. Parser will complain about mismatch of expected test number: [ ] KTAP version 1 [ ] 1..1 [ ] # example: initializing suite [ ] KTAP version 1 [ ] # Subtest: example .. [ ] # example: pass:5 fail:0 skip:4 total:9 [ ] # Totals: pass:6 fail:0 skip:6 total:12 [ ] ok 7 example [ ] [ERROR] Test: example: Expected test number 1 but found 7 [ ] ===================== [PASSED] example ===================== [ ] ============================================================ [ ] Testing complete. Ran 12 tests: passed: 6, skipped: 6, errors: 1 Since we are now printing suite test plan on every module load, right before running suite tests, we should make sure that suite counter will also start from 1. Easiest solution seems to be move counter reset to the __kunit_test_suites_init() function. Signed-off-by: Michal Wajdeczko Cc: David Gow Cc: Rae Moar Reviewed-by: David Gow Signed-off-by: Shuah Khan --- lib/kunit/test.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/lib/kunit/test.c b/lib/kunit/test.c index d70fb799eb95..7aceb07a1af9 100644 --- a/lib/kunit/test.c +++ b/lib/kunit/test.c @@ -708,6 +708,8 @@ int __kunit_test_suites_init(struct kunit_suite * const * const suites, int num_ return 0; } + kunit_suite_counter = 1; + static_branch_inc(&kunit_running); for (i = 0; i < num_suites; i++) { @@ -734,8 +736,6 @@ void __kunit_test_suites_exit(struct kunit_suite **suites, int num_suites) for (i = 0; i < num_suites; i++) kunit_exit_suite(suites[i]); - - kunit_suite_counter = 1; } EXPORT_SYMBOL_GPL(__kunit_test_suites_exit); -- cgit v1.2.3 From 1bddcf77ce6668692fc15e968fd0870d5524d112 Mon Sep 17 00:00:00 2001 From: Richard Fitzgerald Date: Mon, 6 Nov 2023 17:25:57 +0000 Subject: kunit: test: Avoid cast warning when adding kfree() as an action In kunit_log_test() pass the kfree_wrapper() function to kunit_add_action() instead of directly passing kfree(). This prevents a cast warning: lib/kunit/kunit-test.c:565:25: warning: cast from 'void (*)(const void *)' to 'kunit_action_t *' (aka 'void (*)(void *)') converts to incompatible function type [-Wcast-function-type-strict] 564 full_log = string_stream_get_string(test->log); > 565 kunit_add_action(test, (kunit_action_t *)kfree, full_log); Signed-off-by: Richard Fitzgerald Reported-by: kernel test robot Closes: https://lore.kernel.org/oe-kbuild-all/202311070041.kWVYx7YP-lkp@intel.com/ Fixes: 05e2006ce493 ("kunit: Use string_stream for test log") Reviewed-by: David Gow Signed-off-by: Shuah Khan --- lib/kunit/kunit-test.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/lib/kunit/kunit-test.c b/lib/kunit/kunit-test.c index 99d2a3a528e1..de2113a58fa0 100644 --- a/lib/kunit/kunit-test.c +++ b/lib/kunit/kunit-test.c @@ -562,7 +562,7 @@ static void kunit_log_test(struct kunit *test) KUNIT_EXPECT_TRUE(test, test->log->append_newlines); full_log = string_stream_get_string(test->log); - kunit_add_action(test, (kunit_action_t *)kfree, full_log); + kunit_add_action(test, kfree_wrapper, full_log); KUNIT_EXPECT_NOT_ERR_OR_NULL(test, strstr(full_log, "put this in log.")); KUNIT_EXPECT_NOT_ERR_OR_NULL(test, -- cgit v1.2.3 From eab03c23c2a162085b13200d7942fc5a00b5ccc8 Mon Sep 17 00:00:00 2001 From: Abel Wu Date: Tue, 7 Nov 2023 17:05:07 +0800 Subject: sched/eevdf: Fix vruntime adjustment on reweight vruntime of the (on_rq && !0-lag) entity needs to be adjusted when it gets re-weighted, and the calculations can be simplified based on the fact that re-weight won't change the w-average of all the entities. Please check the proofs in comments. But adjusting vruntime can also cause position change in RB-tree hence require re-queue to fix up which might be costly. This might be avoided by deferring adjustment to the time the entity actually leaves tree (dequeue/pick), but that will negatively affect task selection and probably not good enough either. Fixes: 147f3efaa241 ("sched/fair: Implement an EEVDF-like scheduling policy") Signed-off-by: Abel Wu Signed-off-by: Peter Zijlstra (Intel) Link: https://lkml.kernel.org/r/20231107090510.71322-2-wuyun.abel@bytedance.com --- kernel/sched/fair.c | 151 ++++++++++++++++++++++++++++++++++++++++++++-------- 1 file changed, 128 insertions(+), 23 deletions(-) diff --git a/kernel/sched/fair.c b/kernel/sched/fair.c index 2048138ce54b..025d90925bf6 100644 --- a/kernel/sched/fair.c +++ b/kernel/sched/fair.c @@ -3666,41 +3666,140 @@ static inline void dequeue_load_avg(struct cfs_rq *cfs_rq, struct sched_entity *se) { } #endif +static void reweight_eevdf(struct cfs_rq *cfs_rq, struct sched_entity *se, + unsigned long weight) +{ + unsigned long old_weight = se->load.weight; + u64 avruntime = avg_vruntime(cfs_rq); + s64 vlag, vslice; + + /* + * VRUNTIME + * ======== + * + * COROLLARY #1: The virtual runtime of the entity needs to be + * adjusted if re-weight at !0-lag point. + * + * Proof: For contradiction assume this is not true, so we can + * re-weight without changing vruntime at !0-lag point. + * + * Weight VRuntime Avg-VRuntime + * before w v V + * after w' v' V' + * + * Since lag needs to be preserved through re-weight: + * + * lag = (V - v)*w = (V'- v')*w', where v = v' + * ==> V' = (V - v)*w/w' + v (1) + * + * Let W be the total weight of the entities before reweight, + * since V' is the new weighted average of entities: + * + * V' = (WV + w'v - wv) / (W + w' - w) (2) + * + * by using (1) & (2) we obtain: + * + * (WV + w'v - wv) / (W + w' - w) = (V - v)*w/w' + v + * ==> (WV-Wv+Wv+w'v-wv)/(W+w'-w) = (V - v)*w/w' + v + * ==> (WV - Wv)/(W + w' - w) + v = (V - v)*w/w' + v + * ==> (V - v)*W/(W + w' - w) = (V - v)*w/w' (3) + * + * Since we are doing at !0-lag point which means V != v, we + * can simplify (3): + * + * ==> W / (W + w' - w) = w / w' + * ==> Ww' = Ww + ww' - ww + * ==> W * (w' - w) = w * (w' - w) + * ==> W = w (re-weight indicates w' != w) + * + * So the cfs_rq contains only one entity, hence vruntime of + * the entity @v should always equal to the cfs_rq's weighted + * average vruntime @V, which means we will always re-weight + * at 0-lag point, thus breach assumption. Proof completed. + * + * + * COROLLARY #2: Re-weight does NOT affect weighted average + * vruntime of all the entities. + * + * Proof: According to corollary #1, Eq. (1) should be: + * + * (V - v)*w = (V' - v')*w' + * ==> v' = V' - (V - v)*w/w' (4) + * + * According to the weighted average formula, we have: + * + * V' = (WV - wv + w'v') / (W - w + w') + * = (WV - wv + w'(V' - (V - v)w/w')) / (W - w + w') + * = (WV - wv + w'V' - Vw + wv) / (W - w + w') + * = (WV + w'V' - Vw) / (W - w + w') + * + * ==> V'*(W - w + w') = WV + w'V' - Vw + * ==> V' * (W - w) = (W - w) * V (5) + * + * If the entity is the only one in the cfs_rq, then reweight + * always occurs at 0-lag point, so V won't change. Or else + * there are other entities, hence W != w, then Eq. (5) turns + * into V' = V. So V won't change in either case, proof done. + * + * + * So according to corollary #1 & #2, the effect of re-weight + * on vruntime should be: + * + * v' = V' - (V - v) * w / w' (4) + * = V - (V - v) * w / w' + * = V - vl * w / w' + * = V - vl' + */ + if (avruntime != se->vruntime) { + vlag = (s64)(avruntime - se->vruntime); + vlag = div_s64(vlag * old_weight, weight); + se->vruntime = avruntime - vlag; + } + + /* + * DEADLINE + * ======== + * + * When the weight changes, the virtual time slope changes and + * we should adjust the relative virtual deadline accordingly. + * + * d' = v' + (d - v)*w/w' + * = V' - (V - v)*w/w' + (d - v)*w/w' + * = V - (V - v)*w/w' + (d - v)*w/w' + * = V + (d - V)*w/w' + */ + vslice = (s64)(se->deadline - avruntime); + vslice = div_s64(vslice * old_weight, weight); + se->deadline = avruntime + vslice; +} + static void reweight_entity(struct cfs_rq *cfs_rq, struct sched_entity *se, unsigned long weight) { - unsigned long old_weight = se->load.weight; + bool curr = cfs_rq->curr == se; if (se->on_rq) { /* commit outstanding execution time */ - if (cfs_rq->curr == se) + if (curr) update_curr(cfs_rq); else - avg_vruntime_sub(cfs_rq, se); + __dequeue_entity(cfs_rq, se); update_load_sub(&cfs_rq->load, se->load.weight); } dequeue_load_avg(cfs_rq, se); - update_load_set(&se->load, weight); - if (!se->on_rq) { /* * Because we keep se->vlag = V - v_i, while: lag_i = w_i*(V - v_i), * we need to scale se->vlag when w_i changes. */ - se->vlag = div_s64(se->vlag * old_weight, weight); + se->vlag = div_s64(se->vlag * se->load.weight, weight); } else { - s64 deadline = se->deadline - se->vruntime; - /* - * When the weight changes, the virtual time slope changes and - * we should adjust the relative virtual deadline accordingly. - */ - deadline = div_s64(deadline * old_weight, weight); - se->deadline = se->vruntime + deadline; - if (se != cfs_rq->curr) - min_deadline_cb_propagate(&se->run_node, NULL); + reweight_eevdf(cfs_rq, se, weight); } + update_load_set(&se->load, weight); + #ifdef CONFIG_SMP do { u32 divider = get_pelt_divider(&se->avg); @@ -3712,8 +3811,17 @@ static void reweight_entity(struct cfs_rq *cfs_rq, struct sched_entity *se, enqueue_load_avg(cfs_rq, se); if (se->on_rq) { update_load_add(&cfs_rq->load, se->load.weight); - if (cfs_rq->curr != se) - avg_vruntime_add(cfs_rq, se); + if (!curr) { + /* + * The entity's vruntime has been adjusted, so let's check + * whether the rq-wide min_vruntime needs updated too. Since + * the calculations above require stable min_vruntime rather + * than up-to-date one, we do the update at the end of the + * reweight process. + */ + __enqueue_entity(cfs_rq, se); + update_min_vruntime(cfs_rq); + } } } @@ -3857,14 +3965,11 @@ static void update_cfs_group(struct sched_entity *se) #ifndef CONFIG_SMP shares = READ_ONCE(gcfs_rq->tg->shares); - - if (likely(se->load.weight == shares)) - return; #else - shares = calc_group_shares(gcfs_rq); + shares = calc_group_shares(gcfs_rq); #endif - - reweight_entity(cfs_rq_of(se), se, shares); + if (unlikely(se->load.weight != shares)) + reweight_entity(cfs_rq_of(se), se, shares); } #else /* CONFIG_FAIR_GROUP_SCHED */ -- cgit v1.2.3 From 8b39d20eceeda6c4eb23df1497f9ed2fffdc8f69 Mon Sep 17 00:00:00 2001 From: Johannes Weiner Date: Thu, 26 Oct 2023 12:41:14 -0400 Subject: sched: psi: fix unprivileged polling against cgroups 519fabc7aaba ("psi: remove 500ms min window size limitation for triggers") breaks unprivileged psi polling on cgroups. Historically, we had a privilege check for polling in the open() of a pressure file in /proc, but were erroneously missing it for the open() of cgroup pressure files. When unprivileged polling was introduced in d82caa273565 ("sched/psi: Allow unprivileged polling of N*2s period"), it needed to filter privileges depending on the exact polling parameters, and as such moved the CAP_SYS_RESOURCE check from the proc open() callback to psi_trigger_create(). Both the proc files as well as cgroup files go through this during write(). This implicitly added the missing check for privileges required for HT polling for cgroups. When 519fabc7aaba ("psi: remove 500ms min window size limitation for triggers") followed right after to remove further restrictions on the RT polling window, it incorrectly assumed the cgroup privilege check was still missing and added it to the cgroup open(), mirroring what we used to do for proc files in the past. As a result, unprivileged poll requests that would be supported now get rejected when opening the cgroup pressure file for writing. Remove the cgroup open() check. psi_trigger_create() handles it. Fixes: 519fabc7aaba ("psi: remove 500ms min window size limitation for triggers") Reported-by: Luca Boccassi Signed-off-by: Johannes Weiner Signed-off-by: Peter Zijlstra (Intel) Acked-by: Luca Boccassi Acked-by: Suren Baghdasaryan Cc: stable@vger.kernel.org # 6.5+ Link: https://lore.kernel.org/r/20231026164114.2488682-1-hannes@cmpxchg.org --- kernel/cgroup/cgroup.c | 12 ------------ 1 file changed, 12 deletions(-) diff --git a/kernel/cgroup/cgroup.c b/kernel/cgroup/cgroup.c index 1d5b9de3b1b9..4b9ff41ca603 100644 --- a/kernel/cgroup/cgroup.c +++ b/kernel/cgroup/cgroup.c @@ -3885,14 +3885,6 @@ static __poll_t cgroup_pressure_poll(struct kernfs_open_file *of, return psi_trigger_poll(&ctx->psi.trigger, of->file, pt); } -static int cgroup_pressure_open(struct kernfs_open_file *of) -{ - if (of->file->f_mode & FMODE_WRITE && !capable(CAP_SYS_RESOURCE)) - return -EPERM; - - return 0; -} - static void cgroup_pressure_release(struct kernfs_open_file *of) { struct cgroup_file_ctx *ctx = of->priv; @@ -5299,7 +5291,6 @@ static struct cftype cgroup_psi_files[] = { { .name = "io.pressure", .file_offset = offsetof(struct cgroup, psi_files[PSI_IO]), - .open = cgroup_pressure_open, .seq_show = cgroup_io_pressure_show, .write = cgroup_io_pressure_write, .poll = cgroup_pressure_poll, @@ -5308,7 +5299,6 @@ static struct cftype cgroup_psi_files[] = { { .name = "memory.pressure", .file_offset = offsetof(struct cgroup, psi_files[PSI_MEM]), - .open = cgroup_pressure_open, .seq_show = cgroup_memory_pressure_show, .write = cgroup_memory_pressure_write, .poll = cgroup_pressure_poll, @@ -5317,7 +5307,6 @@ static struct cftype cgroup_psi_files[] = { { .name = "cpu.pressure", .file_offset = offsetof(struct cgroup, psi_files[PSI_CPU]), - .open = cgroup_pressure_open, .seq_show = cgroup_cpu_pressure_show, .write = cgroup_cpu_pressure_write, .poll = cgroup_pressure_poll, @@ -5327,7 +5316,6 @@ static struct cftype cgroup_psi_files[] = { { .name = "irq.pressure", .file_offset = offsetof(struct cgroup, psi_files[PSI_IRQ]), - .open = cgroup_pressure_open, .seq_show = cgroup_irq_pressure_show, .write = cgroup_irq_pressure_write, .poll = cgroup_pressure_poll, -- cgit v1.2.3 From 6d7e4782bcf549221b4ccfffec2cf4d1a473f1a3 Mon Sep 17 00:00:00 2001 From: Keisuke Nishimura Date: Tue, 31 Oct 2023 14:38:22 +0100 Subject: sched/fair: Fix the decision for load balance should_we_balance is called for the decision to do load-balancing. When sched ticks invoke this function, only one CPU should return true. However, in the current code, two CPUs can return true. The following situation, where b means busy and i means idle, is an example, because CPU 0 and CPU 2 return true. [0, 1] [2, 3] b b i b This fix checks if there exists an idle CPU with busy sibling(s) after looking for a CPU on an idle core. If some idle CPUs with busy siblings are found, just the first one should do load-balancing. Fixes: b1bfeab9b002 ("sched/fair: Consider the idle state of the whole core for load balance") Signed-off-by: Keisuke Nishimura Signed-off-by: Peter Zijlstra (Intel) Reviewed-by: Chen Yu Reviewed-by: Shrikanth Hegde Reviewed-by: Vincent Guittot Link: https://lkml.kernel.org/r/20231031133821.1570861-1-keisuke.nishimura@inria.fr --- kernel/sched/fair.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/kernel/sched/fair.c b/kernel/sched/fair.c index 025d90925bf6..d7a3c63a2171 100644 --- a/kernel/sched/fair.c +++ b/kernel/sched/fair.c @@ -11184,12 +11184,16 @@ static int should_we_balance(struct lb_env *env) continue; } - /* Are we the first idle CPU? */ + /* + * Are we the first idle core in a non-SMT domain or higher, + * or the first idle CPU in a SMT domain? + */ return cpu == env->dst_cpu; } - if (idle_smt == env->dst_cpu) - return true; + /* Are we the first idle CPU with busy siblings? */ + if (idle_smt != -1) + return idle_smt == env->dst_cpu; /* Are we the first CPU of this group ? */ return group_balance_cpu(sg) == env->dst_cpu; -- cgit v1.2.3 From 09f12bf9f790052710bd6e48a1fc1bc4d9e17389 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Tue, 7 Nov 2023 18:18:31 +0300 Subject: nouveau/gsp/r535: uninitialized variable in r535_gsp_acpi_mux_id() The if we hit the "continue" statement on the first iteration through the loop then "handle_mux" needs to be set to NULL so we continue looping. Fixes: 176fdcbddfd2 ("drm/nouveau/gsp/r535: add support for booting GSP-RM") Signed-off-by: Dan Carpenter Reviewed-by: Danilo Krummrich Signed-off-by: Danilo Krummrich Link: https://patchwork.freedesktop.org/patch/msgid/1d864f6e-43e9-43d8-9d90-30e76c9c843b@moroto.mountain --- drivers/gpu/drm/nouveau/nvkm/subdev/gsp/r535.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/nouveau/nvkm/subdev/gsp/r535.c b/drivers/gpu/drm/nouveau/nvkm/subdev/gsp/r535.c index e31f9641114b..afa8e7377a76 100644 --- a/drivers/gpu/drm/nouveau/nvkm/subdev/gsp/r535.c +++ b/drivers/gpu/drm/nouveau/nvkm/subdev/gsp/r535.c @@ -1159,7 +1159,7 @@ static void r535_gsp_acpi_mux_id(acpi_handle handle, u32 id, MUX_METHOD_DATA_ELEMENT *mode, MUX_METHOD_DATA_ELEMENT *part) { - acpi_handle iter = NULL, handle_mux; + acpi_handle iter = NULL, handle_mux = NULL; acpi_status status; unsigned long long value; -- cgit v1.2.3 From 42bd415bd8bd43721d423930b4695c565661e687 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Wed, 8 Nov 2023 10:40:21 +0300 Subject: nouveau/gsp/r535: Fix a NULL vs error pointer bug The r535_gsp_cmdq_get() function returns error pointers but this code checks for NULL. Also we need to propagate the error pointer back to the callers in r535_gsp_rpc_get(). Returning NULL will lead to a NULL pointer dereference. Fixes: 176fdcbddfd2 ("drm/nouveau/gsp/r535: add support for booting GSP-RM") Signed-off-by: Dan Carpenter Reviewed-by: Danilo Krummrich Signed-off-by: Danilo Krummrich Link: https://patchwork.freedesktop.org/patch/msgid/f71996d9-d1cb-45ea-a4b2-2dfc21312d8c@kili.mountain --- drivers/gpu/drm/nouveau/nvkm/subdev/gsp/r535.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/nouveau/nvkm/subdev/gsp/r535.c b/drivers/gpu/drm/nouveau/nvkm/subdev/gsp/r535.c index afa8e7377a76..dc44f5c7833f 100644 --- a/drivers/gpu/drm/nouveau/nvkm/subdev/gsp/r535.c +++ b/drivers/gpu/drm/nouveau/nvkm/subdev/gsp/r535.c @@ -689,8 +689,8 @@ r535_gsp_rpc_get(struct nvkm_gsp *gsp, u32 fn, u32 argc) struct nvfw_gsp_rpc *rpc; rpc = r535_gsp_cmdq_get(gsp, ALIGN(sizeof(*rpc) + argc, sizeof(u64))); - if (!rpc) - return NULL; + if (IS_ERR(rpc)) + return ERR_CAST(rpc); rpc->header_version = 0x03000000; rpc->signature = ('C' << 24) | ('P' << 16) | ('R' << 8) | 'V'; -- cgit v1.2.3 From a2e36cd56041e277d7d81d35638fd8d9731e21f5 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Tue, 7 Nov 2023 15:32:55 +1000 Subject: nouveau: use an rwlock for the event lock. This allows it to break the following circular locking dependency. Aug 10 07:01:29 dg1test kernel: ====================================================== Aug 10 07:01:29 dg1test kernel: WARNING: possible circular locking dependency detected Aug 10 07:01:29 dg1test kernel: 6.4.0-rc7+ #10 Not tainted Aug 10 07:01:29 dg1test kernel: ------------------------------------------------------ Aug 10 07:01:29 dg1test kernel: wireplumber/2236 is trying to acquire lock: Aug 10 07:01:29 dg1test kernel: ffff8fca5320da18 (&fctx->lock){-...}-{2:2}, at: nouveau_fence_wait_uevent_handler+0x2b/0x100 [nouveau] Aug 10 07:01:29 dg1test kernel: but task is already holding lock: Aug 10 07:01:29 dg1test kernel: ffff8fca41208610 (&event->list_lock#2){-...}-{2:2}, at: nvkm_event_ntfy+0x50/0xf0 [nouveau] Aug 10 07:01:29 dg1test kernel: which lock already depends on the new lock. Aug 10 07:01:29 dg1test kernel: the existing dependency chain (in reverse order) is: Aug 10 07:01:29 dg1test kernel: -> #3 (&event->list_lock#2){-...}-{2:2}: Aug 10 07:01:29 dg1test kernel: _raw_spin_lock_irqsave+0x4b/0x70 Aug 10 07:01:29 dg1test kernel: nvkm_event_ntfy+0x50/0xf0 [nouveau] Aug 10 07:01:29 dg1test kernel: ga100_fifo_nonstall_intr+0x24/0x30 [nouveau] Aug 10 07:01:29 dg1test kernel: nvkm_intr+0x12c/0x240 [nouveau] Aug 10 07:01:29 dg1test kernel: __handle_irq_event_percpu+0x88/0x240 Aug 10 07:01:29 dg1test kernel: handle_irq_event+0x38/0x80 Aug 10 07:01:29 dg1test kernel: handle_edge_irq+0xa3/0x240 Aug 10 07:01:29 dg1test kernel: __common_interrupt+0x72/0x160 Aug 10 07:01:29 dg1test kernel: common_interrupt+0x60/0xe0 Aug 10 07:01:29 dg1test kernel: asm_common_interrupt+0x26/0x40 Aug 10 07:01:29 dg1test kernel: -> #2 (&device->intr.lock){-...}-{2:2}: Aug 10 07:01:29 dg1test kernel: _raw_spin_lock_irqsave+0x4b/0x70 Aug 10 07:01:29 dg1test kernel: nvkm_inth_allow+0x2c/0x80 [nouveau] Aug 10 07:01:29 dg1test kernel: nvkm_event_ntfy_state+0x181/0x250 [nouveau] Aug 10 07:01:29 dg1test kernel: nvkm_event_ntfy_allow+0x63/0xd0 [nouveau] Aug 10 07:01:29 dg1test kernel: nvkm_uevent_mthd+0x4d/0x70 [nouveau] Aug 10 07:01:29 dg1test kernel: nvkm_ioctl+0x10b/0x250 [nouveau] Aug 10 07:01:29 dg1test kernel: nvif_object_mthd+0xa8/0x1f0 [nouveau] Aug 10 07:01:29 dg1test kernel: nvif_event_allow+0x2a/0xa0 [nouveau] Aug 10 07:01:29 dg1test kernel: nouveau_fence_enable_signaling+0x78/0x80 [nouveau] Aug 10 07:01:29 dg1test kernel: __dma_fence_enable_signaling+0x5e/0x100 Aug 10 07:01:29 dg1test kernel: dma_fence_add_callback+0x4b/0xd0 Aug 10 07:01:29 dg1test kernel: nouveau_cli_work_queue+0xae/0x110 [nouveau] Aug 10 07:01:29 dg1test kernel: nouveau_gem_object_close+0x1d1/0x2a0 [nouveau] Aug 10 07:01:29 dg1test kernel: drm_gem_handle_delete+0x70/0xe0 [drm] Aug 10 07:01:29 dg1test kernel: drm_ioctl_kernel+0xa5/0x150 [drm] Aug 10 07:01:29 dg1test kernel: drm_ioctl+0x256/0x490 [drm] Aug 10 07:01:29 dg1test kernel: nouveau_drm_ioctl+0x5a/0xb0 [nouveau] Aug 10 07:01:29 dg1test kernel: __x64_sys_ioctl+0x91/0xd0 Aug 10 07:01:29 dg1test kernel: do_syscall_64+0x3c/0x90 Aug 10 07:01:29 dg1test kernel: entry_SYSCALL_64_after_hwframe+0x72/0xdc Aug 10 07:01:29 dg1test kernel: -> #1 (&event->refs_lock#4){....}-{2:2}: Aug 10 07:01:29 dg1test kernel: _raw_spin_lock_irqsave+0x4b/0x70 Aug 10 07:01:29 dg1test kernel: nvkm_event_ntfy_state+0x37/0x250 [nouveau] Aug 10 07:01:29 dg1test kernel: nvkm_event_ntfy_allow+0x63/0xd0 [nouveau] Aug 10 07:01:29 dg1test kernel: nvkm_uevent_mthd+0x4d/0x70 [nouveau] Aug 10 07:01:29 dg1test kernel: nvkm_ioctl+0x10b/0x250 [nouveau] Aug 10 07:01:29 dg1test kernel: nvif_object_mthd+0xa8/0x1f0 [nouveau] Aug 10 07:01:29 dg1test kernel: nvif_event_allow+0x2a/0xa0 [nouveau] Aug 10 07:01:29 dg1test kernel: nouveau_fence_enable_signaling+0x78/0x80 [nouveau] Aug 10 07:01:29 dg1test kernel: __dma_fence_enable_signaling+0x5e/0x100 Aug 10 07:01:29 dg1test kernel: dma_fence_add_callback+0x4b/0xd0 Aug 10 07:01:29 dg1test kernel: nouveau_cli_work_queue+0xae/0x110 [nouveau] Aug 10 07:01:29 dg1test kernel: nouveau_gem_object_close+0x1d1/0x2a0 [nouveau] Aug 10 07:01:29 dg1test kernel: drm_gem_handle_delete+0x70/0xe0 [drm] Aug 10 07:01:29 dg1test kernel: drm_ioctl_kernel+0xa5/0x150 [drm] Aug 10 07:01:29 dg1test kernel: drm_ioctl+0x256/0x490 [drm] Aug 10 07:01:29 dg1test kernel: nouveau_drm_ioctl+0x5a/0xb0 [nouveau] Aug 10 07:01:29 dg1test kernel: __x64_sys_ioctl+0x91/0xd0 Aug 10 07:01:29 dg1test kernel: do_syscall_64+0x3c/0x90 Aug 10 07:01:29 dg1test kernel: entry_SYSCALL_64_after_hwframe+0x72/0xdc Aug 10 07:01:29 dg1test kernel: -> #0 (&fctx->lock){-...}-{2:2}: Aug 10 07:01:29 dg1test kernel: __lock_acquire+0x14e3/0x2240 Aug 10 07:01:29 dg1test kernel: lock_acquire+0xc8/0x2a0 Aug 10 07:01:29 dg1test kernel: _raw_spin_lock_irqsave+0x4b/0x70 Aug 10 07:01:29 dg1test kernel: nouveau_fence_wait_uevent_handler+0x2b/0x100 [nouveau] Aug 10 07:01:29 dg1test kernel: nvkm_client_event+0xf/0x20 [nouveau] Aug 10 07:01:29 dg1test kernel: nvkm_event_ntfy+0x9b/0xf0 [nouveau] Aug 10 07:01:29 dg1test kernel: ga100_fifo_nonstall_intr+0x24/0x30 [nouveau] Aug 10 07:01:29 dg1test kernel: nvkm_intr+0x12c/0x240 [nouveau] Aug 10 07:01:29 dg1test kernel: __handle_irq_event_percpu+0x88/0x240 Aug 10 07:01:29 dg1test kernel: handle_irq_event+0x38/0x80 Aug 10 07:01:29 dg1test kernel: handle_edge_irq+0xa3/0x240 Aug 10 07:01:29 dg1test kernel: __common_interrupt+0x72/0x160 Aug 10 07:01:29 dg1test kernel: common_interrupt+0x60/0xe0 Aug 10 07:01:29 dg1test kernel: asm_common_interrupt+0x26/0x40 Aug 10 07:01:29 dg1test kernel: other info that might help us debug this: Aug 10 07:01:29 dg1test kernel: Chain exists of: &fctx->lock --> &device->intr.lock --> &event->list_lock#2 Aug 10 07:01:29 dg1test kernel: Possible unsafe locking scenario: Aug 10 07:01:29 dg1test kernel: CPU0 CPU1 Aug 10 07:01:29 dg1test kernel: ---- ---- Aug 10 07:01:29 dg1test kernel: lock(&event->list_lock#2); Aug 10 07:01:29 dg1test kernel: lock(&device->intr.lock); Aug 10 07:01:29 dg1test kernel: lock(&event->list_lock#2); Aug 10 07:01:29 dg1test kernel: lock(&fctx->lock); Aug 10 07:01:29 dg1test kernel: *** DEADLOCK *** Aug 10 07:01:29 dg1test kernel: 2 locks held by wireplumber/2236: Aug 10 07:01:29 dg1test kernel: #0: ffff8fca53177bf8 (&device->intr.lock){-...}-{2:2}, at: nvkm_intr+0x29/0x240 [nouveau] Aug 10 07:01:29 dg1test kernel: #1: ffff8fca41208610 (&event->list_lock#2){-...}-{2:2}, at: nvkm_event_ntfy+0x50/0xf0 [nouveau] Aug 10 07:01:29 dg1test kernel: stack backtrace: Aug 10 07:01:29 dg1test kernel: CPU: 6 PID: 2236 Comm: wireplumber Not tainted 6.4.0-rc7+ #10 Aug 10 07:01:29 dg1test kernel: Hardware name: Gigabyte Technology Co., Ltd. Z390 I AORUS PRO WIFI/Z390 I AORUS PRO WIFI-CF, BIOS F8 11/05/2021 Aug 10 07:01:29 dg1test kernel: Call Trace: Aug 10 07:01:29 dg1test kernel: Aug 10 07:01:29 dg1test kernel: dump_stack_lvl+0x5b/0x90 Aug 10 07:01:29 dg1test kernel: check_noncircular+0xe2/0x110 Aug 10 07:01:29 dg1test kernel: __lock_acquire+0x14e3/0x2240 Aug 10 07:01:29 dg1test kernel: lock_acquire+0xc8/0x2a0 Aug 10 07:01:29 dg1test kernel: ? nouveau_fence_wait_uevent_handler+0x2b/0x100 [nouveau] Aug 10 07:01:29 dg1test kernel: ? lock_acquire+0xc8/0x2a0 Aug 10 07:01:29 dg1test kernel: _raw_spin_lock_irqsave+0x4b/0x70 Aug 10 07:01:29 dg1test kernel: ? nouveau_fence_wait_uevent_handler+0x2b/0x100 [nouveau] Aug 10 07:01:29 dg1test kernel: nouveau_fence_wait_uevent_handler+0x2b/0x100 [nouveau] Aug 10 07:01:29 dg1test kernel: nvkm_client_event+0xf/0x20 [nouveau] Aug 10 07:01:29 dg1test kernel: nvkm_event_ntfy+0x9b/0xf0 [nouveau] Aug 10 07:01:29 dg1test kernel: ga100_fifo_nonstall_intr+0x24/0x30 [nouveau] Aug 10 07:01:29 dg1test kernel: nvkm_intr+0x12c/0x240 [nouveau] Aug 10 07:01:29 dg1test kernel: __handle_irq_event_percpu+0x88/0x240 Aug 10 07:01:29 dg1test kernel: handle_irq_event+0x38/0x80 Aug 10 07:01:29 dg1test kernel: handle_edge_irq+0xa3/0x240 Aug 10 07:01:29 dg1test kernel: __common_interrupt+0x72/0x160 Aug 10 07:01:29 dg1test kernel: common_interrupt+0x60/0xe0 Aug 10 07:01:29 dg1test kernel: asm_common_interrupt+0x26/0x40 Aug 10 07:01:29 dg1test kernel: RIP: 0033:0x7fb66174d700 Aug 10 07:01:29 dg1test kernel: Code: c1 e2 05 29 ca 8d 0c 10 0f be 07 84 c0 75 eb 89 c8 c3 0f 1f 84 00 00 00 00 00 f3 0f 1e fa e9 d7 0f fc ff 0f 1f 80 00 00 00 00 0f 1e fa e9 c7 0f fc> Aug 10 07:01:29 dg1test kernel: RSP: 002b:00007ffdd3c48438 EFLAGS: 00000206 Aug 10 07:01:29 dg1test kernel: RAX: 000055bb758763c0 RBX: 000055bb758752c0 RCX: 00000000000028b0 Aug 10 07:01:29 dg1test kernel: RDX: 000055bb758752c0 RSI: 000055bb75887490 RDI: 000055bb75862950 Aug 10 07:01:29 dg1test kernel: RBP: 00007ffdd3c48490 R08: 000055bb75873b10 R09: 0000000000000001 Aug 10 07:01:29 dg1test kernel: R10: 0000000000000004 R11: 000055bb7587f000 R12: 000055bb75887490 Aug 10 07:01:29 dg1test kernel: R13: 000055bb757f6280 R14: 000055bb758875c0 R15: 000055bb757f6280 Aug 10 07:01:29 dg1test kernel: Signed-off-by: Dave Airlie Tested-by: Danilo Krummrich Reviewed-by: Danilo Krummrich Signed-off-by: Danilo Krummrich Link: https://patchwork.freedesktop.org/patch/msgid/20231107053255.2257079-1-airlied@gmail.com --- drivers/gpu/drm/nouveau/include/nvkm/core/event.h | 4 ++-- drivers/gpu/drm/nouveau/nvkm/core/event.c | 12 ++++++------ 2 files changed, 8 insertions(+), 8 deletions(-) diff --git a/drivers/gpu/drm/nouveau/include/nvkm/core/event.h b/drivers/gpu/drm/nouveau/include/nvkm/core/event.h index 82b267c11147..460459af272d 100644 --- a/drivers/gpu/drm/nouveau/include/nvkm/core/event.h +++ b/drivers/gpu/drm/nouveau/include/nvkm/core/event.h @@ -14,7 +14,7 @@ struct nvkm_event { int index_nr; spinlock_t refs_lock; - spinlock_t list_lock; + rwlock_t list_lock; int *refs; struct list_head ntfy; @@ -38,7 +38,7 @@ nvkm_event_init(const struct nvkm_event_func *func, struct nvkm_subdev *subdev, int types_nr, int index_nr, struct nvkm_event *event) { spin_lock_init(&event->refs_lock); - spin_lock_init(&event->list_lock); + rwlock_init(&event->list_lock); return __nvkm_event_init(func, subdev, types_nr, index_nr, event); } diff --git a/drivers/gpu/drm/nouveau/nvkm/core/event.c b/drivers/gpu/drm/nouveau/nvkm/core/event.c index a6c877135598..61fed7792e41 100644 --- a/drivers/gpu/drm/nouveau/nvkm/core/event.c +++ b/drivers/gpu/drm/nouveau/nvkm/core/event.c @@ -81,17 +81,17 @@ nvkm_event_ntfy_state(struct nvkm_event_ntfy *ntfy) static void nvkm_event_ntfy_remove(struct nvkm_event_ntfy *ntfy) { - spin_lock_irq(&ntfy->event->list_lock); + write_lock_irq(&ntfy->event->list_lock); list_del_init(&ntfy->head); - spin_unlock_irq(&ntfy->event->list_lock); + write_unlock_irq(&ntfy->event->list_lock); } static void nvkm_event_ntfy_insert(struct nvkm_event_ntfy *ntfy) { - spin_lock_irq(&ntfy->event->list_lock); + write_lock_irq(&ntfy->event->list_lock); list_add_tail(&ntfy->head, &ntfy->event->ntfy); - spin_unlock_irq(&ntfy->event->list_lock); + write_unlock_irq(&ntfy->event->list_lock); } static void @@ -176,7 +176,7 @@ nvkm_event_ntfy(struct nvkm_event *event, int id, u32 bits) return; nvkm_trace(event->subdev, "event: ntfy %08x on %d\n", bits, id); - spin_lock_irqsave(&event->list_lock, flags); + read_lock_irqsave(&event->list_lock, flags); list_for_each_entry_safe(ntfy, ntmp, &event->ntfy, head) { if (ntfy->id == id && ntfy->bits & bits) { @@ -185,7 +185,7 @@ nvkm_event_ntfy(struct nvkm_event *event, int id, u32 bits) } } - spin_unlock_irqrestore(&event->list_lock, flags); + read_unlock_irqrestore(&event->list_lock, flags); } void -- cgit v1.2.3 From 969d90ec212bae4b45bf9d21d7daa30aa6cf055e Mon Sep 17 00:00:00 2001 From: Paul Moore Date: Tue, 14 Nov 2023 17:25:48 -0500 Subject: audit: don't WARN_ON_ONCE(!current->mm) in audit_exe_compare() eBPF can end up calling into the audit code from some odd places, and some of these places don't have @current set properly so we end up tripping the `WARN_ON_ONCE(!current->mm)` near the top of `audit_exe_compare()`. While the basic `!current->mm` check is good, the `WARN_ON_ONCE()` results in some scary console messages so let's drop that and just do the regular `!current->mm` check to avoid problems. Cc: Fixes: 47846d51348d ("audit: don't take task_lock() in audit_exe_compare() code path") Reported-by: Artem Savkov Signed-off-by: Paul Moore --- kernel/audit_watch.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/audit_watch.c b/kernel/audit_watch.c index 91e82e34b51e..7a98cd176a12 100644 --- a/kernel/audit_watch.c +++ b/kernel/audit_watch.c @@ -531,7 +531,7 @@ int audit_exe_compare(struct task_struct *tsk, struct audit_fsnotify_mark *mark) if (tsk != current) return 0; - if (WARN_ON_ONCE(!current->mm)) + if (!current->mm) return 0; exe_file = get_mm_exe_file(current->mm); if (!exe_file) -- cgit v1.2.3 From 77618db346455129424fadbbaec596a09feaf3bb Mon Sep 17 00:00:00 2001 From: Nick Terrell Date: Thu, 12 Oct 2023 12:55:34 -0700 Subject: zstd: Fix array-index-out-of-bounds UBSAN warning Zstd used an array of length 1 to mean a flexible array for C89 compatibility. Switch to a C99 flexible array to fix the UBSAN warning. Tested locally by booting the kernel and writing to and reading from a BtrFS filesystem with zstd compression enabled. I was unable to reproduce the issue before the fix, however it is a trivial change. Link: https://lkml.kernel.org/r/20231012213428.1390905-1-nickrterrell@gmail.com Reported-by: syzbot+1f2eb3e8cd123ffce499@syzkaller.appspotmail.com Reported-by: Eric Biggers Reported-by: Kees Cook Signed-off-by: Nick Terrell Reviewed-by: Kees Cook --- lib/zstd/common/fse_decompress.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/lib/zstd/common/fse_decompress.c b/lib/zstd/common/fse_decompress.c index a0d06095be83..8dcb8ca39767 100644 --- a/lib/zstd/common/fse_decompress.c +++ b/lib/zstd/common/fse_decompress.c @@ -312,7 +312,7 @@ size_t FSE_decompress_wksp(void* dst, size_t dstCapacity, const void* cSrc, size typedef struct { short ncount[FSE_MAX_SYMBOL_VALUE + 1]; - FSE_DTable dtable[1]; /* Dynamically sized */ + FSE_DTable dtable[]; /* Dynamically sized */ } FSE_DecompressWksp; -- cgit v1.2.3 From c9bd1568d5462f4108417518ce1af7b924acfb6f Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Tue, 14 Nov 2023 21:36:13 +0100 Subject: futex: Fix hardcoded flags Xi reported that commit 5694289ce183 ("futex: Flag conversion") broke glibc's robust futex tests. This was narrowed down to the change of FLAGS_SHARED from 0x01 to 0x10, at which point Florian noted that handle_futex_death() has a hardcoded flags argument of 1. Change this to: FLAGS_SIZE_32 | FLAGS_SHARED, matching how futex_to_flags() unconditionally sets FLAGS_SIZE_32 for all legacy futex ops. Reported-by: Xi Ruoyao Reported-by: Florian Weimer Signed-off-by: Peter Zijlstra (Intel) Signed-off-by: Ingo Molnar Link: https://lkml.kernel.org/r/20231114201402.GA25315@noisy.programming.kicks-ass.net Fixes: 5694289ce183 ("futex: Flag conversion") Cc: --- kernel/futex/core.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/kernel/futex/core.c b/kernel/futex/core.c index 52695c59d041..dad981a865b8 100644 --- a/kernel/futex/core.c +++ b/kernel/futex/core.c @@ -700,7 +700,8 @@ retry: owner = uval & FUTEX_TID_MASK; if (pending_op && !pi && !owner) { - futex_wake(uaddr, 1, 1, FUTEX_BITSET_MATCH_ANY); + futex_wake(uaddr, FLAGS_SIZE_32 | FLAGS_SHARED, 1, + FUTEX_BITSET_MATCH_ANY); return 0; } @@ -752,8 +753,10 @@ retry: * Wake robust non-PI futexes here. The wakeup of * PI futexes happens in exit_pi_state(): */ - if (!pi && (uval & FUTEX_WAITERS)) - futex_wake(uaddr, 1, 1, FUTEX_BITSET_MATCH_ANY); + if (!pi && (uval & FUTEX_WAITERS)) { + futex_wake(uaddr, FLAGS_SIZE_32 | FLAGS_SHARED, 1, + FUTEX_BITSET_MATCH_ANY); + } return 0; } -- cgit v1.2.3 From 889c58b3155ff4c8e8671c95daef63d6fabbb6b1 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Fri, 9 Jun 2023 12:34:46 +0200 Subject: perf/core: Fix cpuctx refcounting Audit of the refcounting turned up that perf_pmu_migrate_context() fails to migrate the ctx refcount. Fixes: bd2756811766 ("perf: Rewrite core context handling") Signed-off-by: Peter Zijlstra (Intel) Signed-off-by: Ingo Molnar Link: https://lkml.kernel.org/r/20230612093539.085862001@infradead.org Cc: --- include/linux/perf_event.h | 13 ++++++++----- kernel/events/core.c | 17 +++++++++++++++++ 2 files changed, 25 insertions(+), 5 deletions(-) diff --git a/include/linux/perf_event.h b/include/linux/perf_event.h index afb028c54f33..5547ba68e6e4 100644 --- a/include/linux/perf_event.h +++ b/include/linux/perf_event.h @@ -843,11 +843,11 @@ struct perf_event { }; /* - * ,-----------------------[1:n]----------------------. - * V V - * perf_event_context <-[1:n]-> perf_event_pmu_context <--- perf_event - * ^ ^ | | - * `--------[1:n]---------' `-[n:1]-> pmu <-[1:n]-' + * ,-----------------------[1:n]------------------------. + * V V + * perf_event_context <-[1:n]-> perf_event_pmu_context <-[1:n]- perf_event + * | | + * `--[n:1]-> pmu <-[1:n]--' * * * struct perf_event_pmu_context lifetime is refcount based and RCU freed @@ -865,6 +865,9 @@ struct perf_event { * ctx->mutex pinning the configuration. Since we hold a reference on * group_leader (through the filedesc) it can't go away, therefore it's * associated pmu_ctx must exist and cannot change due to ctx->mutex. + * + * perf_event holds a refcount on perf_event_context + * perf_event holds a refcount on perf_event_pmu_context */ struct perf_event_pmu_context { struct pmu *pmu; diff --git a/kernel/events/core.c b/kernel/events/core.c index 683dc086ef10..b704d83a28b2 100644 --- a/kernel/events/core.c +++ b/kernel/events/core.c @@ -4828,6 +4828,11 @@ find_get_pmu_context(struct pmu *pmu, struct perf_event_context *ctx, void *task_ctx_data = NULL; if (!ctx->task) { + /* + * perf_pmu_migrate_context() / __perf_pmu_install_event() + * relies on the fact that find_get_pmu_context() cannot fail + * for CPU contexts. + */ struct perf_cpu_pmu_context *cpc; cpc = per_cpu_ptr(pmu->cpu_pmu_context, event->cpu); @@ -12889,6 +12894,9 @@ static void __perf_pmu_install_event(struct pmu *pmu, int cpu, struct perf_event *event) { struct perf_event_pmu_context *epc; + struct perf_event_context *old_ctx = event->ctx; + + get_ctx(ctx); /* normally find_get_context() */ event->cpu = cpu; epc = find_get_pmu_context(pmu, ctx, event); @@ -12897,6 +12905,11 @@ static void __perf_pmu_install_event(struct pmu *pmu, if (event->state >= PERF_EVENT_STATE_OFF) event->state = PERF_EVENT_STATE_INACTIVE; perf_install_in_context(ctx, event, cpu); + + /* + * Now that event->ctx is updated and visible, put the old ctx. + */ + put_ctx(old_ctx); } static void __perf_pmu_install(struct perf_event_context *ctx, @@ -12935,6 +12948,10 @@ void perf_pmu_migrate_context(struct pmu *pmu, int src_cpu, int dst_cpu) struct perf_event_context *src_ctx, *dst_ctx; LIST_HEAD(events); + /* + * Since per-cpu context is persistent, no need to grab an extra + * reference. + */ src_ctx = &per_cpu_ptr(&perf_cpu_context, src_cpu)->ctx; dst_ctx = &per_cpu_ptr(&perf_cpu_context, dst_cpu)->ctx; -- cgit v1.2.3 From fa02de9e75889915b554eda1964a631fd019973b Mon Sep 17 00:00:00 2001 From: Baruch Siach Date: Mon, 13 Nov 2023 19:42:49 +0200 Subject: net: stmmac: fix rx budget limit check The while loop condition verifies 'count < limit'. Neither value change before the 'count >= limit' check. As is this check is dead code. But code inspection reveals a code path that modifies 'count' and then goto 'drain_data' and back to 'read_again'. So there is a need to verify count value sanity after 'read_again'. Move 'read_again' up to fix the count limit check. Fixes: ec222003bd94 ("net: stmmac: Prepare to add Split Header support") Signed-off-by: Baruch Siach Reviewed-by: Serge Semin Link: https://lore.kernel.org/r/d9486296c3b6b12ab3a0515fcd47d56447a07bfc.1699897370.git.baruch@tkos.co.il Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index 3e50fd53a617..f28838c8cdb3 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -5328,10 +5328,10 @@ static int stmmac_rx(struct stmmac_priv *priv, int limit, u32 queue) len = 0; } +read_again: if (count >= limit) break; -read_again: buf1_len = 0; buf2_len = 0; entry = next_entry; -- cgit v1.2.3 From b6cb4541853c7ee512111b0e7ddf3cb66c99c137 Mon Sep 17 00:00:00 2001 From: Baruch Siach Date: Mon, 13 Nov 2023 19:42:50 +0200 Subject: net: stmmac: avoid rx queue overrun dma_rx_size can be set as low as 64. Rx budget might be higher than that. Make sure to not overrun allocated rx buffers when budget is larger. Leave one descriptor unused to avoid wrap around of 'dirty_rx' vs 'cur_rx'. Signed-off-by: Baruch Siach Reviewed-by: Serge Semin Fixes: 47dd7a540b8a ("net: add support for STMicroelectronics Ethernet controllers.") Link: https://lore.kernel.org/r/d95413e44c97d4692e72cec13a75f894abeb6998.1699897370.git.baruch@tkos.co.il Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index f28838c8cdb3..2afb2bd25977 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -5293,6 +5293,7 @@ static int stmmac_rx(struct stmmac_priv *priv, int limit, u32 queue) dma_dir = page_pool_get_dma_dir(rx_q->page_pool); buf_sz = DIV_ROUND_UP(priv->dma_conf.dma_buf_sz, PAGE_SIZE) * PAGE_SIZE; + limit = min(priv->dma_conf.dma_rx_size - 1, (unsigned int)limit); if (netif_msg_rx_status(priv)) { void *rx_head; -- cgit v1.2.3 From 907d1bdb8b2cc0357d03a1c34d2a08d9943760b1 Mon Sep 17 00:00:00 2001 From: Alex Pakhunov Date: Mon, 13 Nov 2023 10:23:49 -0800 Subject: tg3: Move the [rt]x_dropped counters to tg3_napi This change moves [rt]x_dropped counters to tg3_napi so that they can be updated by a single writer, race-free. Signed-off-by: Alex Pakhunov Signed-off-by: Vincent Wong Reviewed-by: Michael Chan Link: https://lore.kernel.org/r/20231113182350.37472-1-alexey.pakhunov@spacex.com Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/broadcom/tg3.c | 38 ++++++++++++++++++++++++++++++++----- drivers/net/ethernet/broadcom/tg3.h | 4 ++-- 2 files changed, 35 insertions(+), 7 deletions(-) diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c index 1dee27349367..884e9eecc471 100644 --- a/drivers/net/ethernet/broadcom/tg3.c +++ b/drivers/net/ethernet/broadcom/tg3.c @@ -6889,7 +6889,7 @@ static int tg3_rx(struct tg3_napi *tnapi, int budget) desc_idx, *post_ptr); drop_it_no_recycle: /* Other statistics kept track of by card. */ - tp->rx_dropped++; + tnapi->rx_dropped++; goto next_pkt; } @@ -8190,7 +8190,7 @@ dma_error: drop: dev_kfree_skb_any(skb); drop_nofree: - tp->tx_dropped++; + tnapi->tx_dropped++; return NETDEV_TX_OK; } @@ -9405,7 +9405,7 @@ static void __tg3_set_rx_mode(struct net_device *); /* tp->lock is held. */ static int tg3_halt(struct tg3 *tp, int kind, bool silent) { - int err; + int err, i; tg3_stop_fw(tp); @@ -9426,6 +9426,13 @@ static int tg3_halt(struct tg3 *tp, int kind, bool silent) /* And make sure the next sample is new data */ memset(tp->hw_stats, 0, sizeof(struct tg3_hw_stats)); + + for (i = 0; i < TG3_IRQ_MAX_VECS; ++i) { + struct tg3_napi *tnapi = &tp->napi[i]; + + tnapi->rx_dropped = 0; + tnapi->tx_dropped = 0; + } } return err; @@ -11975,6 +11982,9 @@ static void tg3_get_nstats(struct tg3 *tp, struct rtnl_link_stats64 *stats) { struct rtnl_link_stats64 *old_stats = &tp->net_stats_prev; struct tg3_hw_stats *hw_stats = tp->hw_stats; + unsigned long rx_dropped; + unsigned long tx_dropped; + int i; stats->rx_packets = old_stats->rx_packets + get_stat64(&hw_stats->rx_ucast_packets) + @@ -12021,8 +12031,26 @@ static void tg3_get_nstats(struct tg3 *tp, struct rtnl_link_stats64 *stats) stats->rx_missed_errors = old_stats->rx_missed_errors + get_stat64(&hw_stats->rx_discards); - stats->rx_dropped = tp->rx_dropped; - stats->tx_dropped = tp->tx_dropped; + /* Aggregate per-queue counters. The per-queue counters are updated + * by a single writer, race-free. The result computed by this loop + * might not be 100% accurate (counters can be updated in the middle of + * the loop) but the next tg3_get_nstats() will recompute the current + * value so it is acceptable. + * + * Note that these counters wrap around at 4G on 32bit machines. + */ + rx_dropped = (unsigned long)(old_stats->rx_dropped); + tx_dropped = (unsigned long)(old_stats->tx_dropped); + + for (i = 0; i < tp->irq_cnt; i++) { + struct tg3_napi *tnapi = &tp->napi[i]; + + rx_dropped += tnapi->rx_dropped; + tx_dropped += tnapi->tx_dropped; + } + + stats->rx_dropped = rx_dropped; + stats->tx_dropped = tx_dropped; } static int tg3_get_regs_len(struct net_device *dev) diff --git a/drivers/net/ethernet/broadcom/tg3.h b/drivers/net/ethernet/broadcom/tg3.h index ae5c01bd1110..5016475e5005 100644 --- a/drivers/net/ethernet/broadcom/tg3.h +++ b/drivers/net/ethernet/broadcom/tg3.h @@ -3018,6 +3018,7 @@ struct tg3_napi { u16 *rx_rcb_prod_idx; struct tg3_rx_prodring_set prodring; struct tg3_rx_buffer_desc *rx_rcb; + unsigned long rx_dropped; u32 tx_prod ____cacheline_aligned; u32 tx_cons; @@ -3026,6 +3027,7 @@ struct tg3_napi { u32 prodmbox; struct tg3_tx_buffer_desc *tx_ring; struct tg3_tx_ring_info *tx_buffers; + unsigned long tx_dropped; dma_addr_t status_mapping; dma_addr_t rx_rcb_mapping; @@ -3220,8 +3222,6 @@ struct tg3 { /* begin "everything else" cacheline(s) section */ - unsigned long rx_dropped; - unsigned long tx_dropped; struct rtnl_link_stats64 net_stats_prev; struct tg3_ethtool_stats estats_prev; -- cgit v1.2.3 From 17dd5efe5f36a96bd78012594fabe21efb01186b Mon Sep 17 00:00:00 2001 From: Alex Pakhunov Date: Mon, 13 Nov 2023 10:23:50 -0800 Subject: tg3: Increment tx_dropped in tg3_tso_bug() tg3_tso_bug() drops a packet if it cannot be segmented for any reason. The number of discarded frames should be incremented accordingly. Signed-off-by: Alex Pakhunov Signed-off-by: Vincent Wong Reviewed-by: Pavan Chebbi Link: https://lore.kernel.org/r/20231113182350.37472-2-alexey.pakhunov@spacex.com Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/broadcom/tg3.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c index 884e9eecc471..48b6191efa56 100644 --- a/drivers/net/ethernet/broadcom/tg3.c +++ b/drivers/net/ethernet/broadcom/tg3.c @@ -7918,8 +7918,10 @@ static int tg3_tso_bug(struct tg3 *tp, struct tg3_napi *tnapi, segs = skb_gso_segment(skb, tp->dev->features & ~(NETIF_F_TSO | NETIF_F_TSO6)); - if (IS_ERR(segs) || !segs) + if (IS_ERR(segs) || !segs) { + tnapi->tx_dropped++; goto tg3_tso_bug_end; + } skb_list_walk_safe(segs, seg, next) { skb_mark_not_on_list(seg); -- cgit v1.2.3 From 09d4c14c6c5e6e781a3879fed7f8e116a18b8c65 Mon Sep 17 00:00:00 2001 From: Shannon Nelson Date: Mon, 13 Nov 2023 10:32:56 -0800 Subject: pds_core: use correct index to mask irq Use the qcq's interrupt index, not the irq number, to mask the interrupt. Since the irq number can be out of range from the number of possible interrupts, we can end up accessing and potentially scribbling on out-of-range and/or unmapped memory, making the kernel angry. [ 3116.039364] BUG: unable to handle page fault for address: ffffbeea1c3edf84 [ 3116.047059] #PF: supervisor write access in kernel mode [ 3116.052895] #PF: error_code(0x0002) - not-present page [ 3116.058636] PGD 100000067 P4D 100000067 PUD 1001f2067 PMD 10f82e067 PTE 0 [ 3116.066221] Oops: 0002 [#1] SMP NOPTI [ 3116.092948] RIP: 0010:iowrite32+0x9/0x76 [ 3116.190452] Call Trace: [ 3116.193185] [ 3116.195430] ? show_trace_log_lvl+0x1d6/0x2f9 [ 3116.200298] ? show_trace_log_lvl+0x1d6/0x2f9 [ 3116.205166] ? pdsc_adminq_isr+0x43/0x55 [pds_core] [ 3116.210618] ? __die_body.cold+0x8/0xa [ 3116.214806] ? page_fault_oops+0x16d/0x1ac [ 3116.219382] ? exc_page_fault+0xbe/0x13b [ 3116.223764] ? asm_exc_page_fault+0x22/0x27 [ 3116.228440] ? iowrite32+0x9/0x76 [ 3116.232143] pdsc_adminq_isr+0x43/0x55 [pds_core] [ 3116.237627] __handle_irq_event_percpu+0x3a/0x184 [ 3116.243088] handle_irq_event+0x57/0xb0 [ 3116.247575] handle_edge_irq+0x87/0x225 [ 3116.252062] __common_interrupt+0x3e/0xbc [ 3116.256740] common_interrupt+0x7b/0x98 [ 3116.261216] [ 3116.263745] [ 3116.266268] asm_common_interrupt+0x22/0x27 Reported-by: Joao Martins Fixes: 01ba61b55b20 ("pds_core: Add adminq processing and commands") Signed-off-by: Shannon Nelson Link: https://lore.kernel.org/r/20231113183257.71110-2-shannon.nelson@amd.com Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/amd/pds_core/adminq.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/amd/pds_core/adminq.c b/drivers/net/ethernet/amd/pds_core/adminq.c index 045fe133f6ee..5beadabc2136 100644 --- a/drivers/net/ethernet/amd/pds_core/adminq.c +++ b/drivers/net/ethernet/amd/pds_core/adminq.c @@ -146,7 +146,7 @@ irqreturn_t pdsc_adminq_isr(int irq, void *data) } queue_work(pdsc->wq, &qcq->work); - pds_core_intr_mask(&pdsc->intr_ctrl[irq], PDS_CORE_INTR_MASK_CLEAR); + pds_core_intr_mask(&pdsc->intr_ctrl[qcq->intx], PDS_CORE_INTR_MASK_CLEAR); return IRQ_HANDLED; } -- cgit v1.2.3 From 7c02f6ae676a954216a192612040f9a0cde3adf7 Mon Sep 17 00:00:00 2001 From: Shannon Nelson Date: Mon, 13 Nov 2023 10:32:57 -0800 Subject: pds_core: fix up some format-truncation complaints Our friendly kernel test robot pointed out a couple of potential string truncation issues. None of which were we worried about, but can be relatively easily fixed to quiet the complaints. Reported-by: kernel test robot Closes: https://lore.kernel.org/oe-kbuild-all/202310211736.66syyDpp-lkp@intel.com/ Fixes: 45d76f492938 ("pds_core: set up device and adminq") Signed-off-by: Shannon Nelson Link: https://lore.kernel.org/r/20231113183257.71110-3-shannon.nelson@amd.com Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/amd/pds_core/core.h | 2 +- drivers/net/ethernet/amd/pds_core/dev.c | 8 ++++++-- drivers/net/ethernet/amd/pds_core/devlink.c | 2 +- 3 files changed, 8 insertions(+), 4 deletions(-) diff --git a/drivers/net/ethernet/amd/pds_core/core.h b/drivers/net/ethernet/amd/pds_core/core.h index f3a7deda9972..e35d3e7006bf 100644 --- a/drivers/net/ethernet/amd/pds_core/core.h +++ b/drivers/net/ethernet/amd/pds_core/core.h @@ -15,7 +15,7 @@ #define PDSC_DRV_DESCRIPTION "AMD/Pensando Core Driver" #define PDSC_WATCHDOG_SECS 5 -#define PDSC_QUEUE_NAME_MAX_SZ 32 +#define PDSC_QUEUE_NAME_MAX_SZ 16 #define PDSC_ADMINQ_MIN_LENGTH 16 /* must be a power of two */ #define PDSC_NOTIFYQ_LENGTH 64 /* must be a power of two */ #define PDSC_TEARDOWN_RECOVERY false diff --git a/drivers/net/ethernet/amd/pds_core/dev.c b/drivers/net/ethernet/amd/pds_core/dev.c index 7c1b965d61a9..31940b857e0e 100644 --- a/drivers/net/ethernet/amd/pds_core/dev.c +++ b/drivers/net/ethernet/amd/pds_core/dev.c @@ -261,10 +261,14 @@ static int pdsc_identify(struct pdsc *pdsc) struct pds_core_drv_identity drv = {}; size_t sz; int err; + int n; drv.drv_type = cpu_to_le32(PDS_DRIVER_LINUX); - snprintf(drv.driver_ver_str, sizeof(drv.driver_ver_str), - "%s %s", PDS_CORE_DRV_NAME, utsname()->release); + /* Catching the return quiets a Wformat-truncation complaint */ + n = snprintf(drv.driver_ver_str, sizeof(drv.driver_ver_str), + "%s %s", PDS_CORE_DRV_NAME, utsname()->release); + if (n > sizeof(drv.driver_ver_str)) + dev_dbg(pdsc->dev, "release name truncated, don't care\n"); /* Next let's get some info about the device * We use the devcmd_lock at this level in order to diff --git a/drivers/net/ethernet/amd/pds_core/devlink.c b/drivers/net/ethernet/amd/pds_core/devlink.c index 57f88c8b37de..e9948ea5bbcd 100644 --- a/drivers/net/ethernet/amd/pds_core/devlink.c +++ b/drivers/net/ethernet/amd/pds_core/devlink.c @@ -104,7 +104,7 @@ int pdsc_dl_info_get(struct devlink *dl, struct devlink_info_req *req, struct pds_core_fw_list_info fw_list; struct pdsc *pdsc = devlink_priv(dl); union pds_core_dev_comp comp; - char buf[16]; + char buf[32]; int listlen; int err; int i; -- cgit v1.2.3 From 278a370c1766060d2144d6cf0b06c101e1043b6d Mon Sep 17 00:00:00 2001 From: Ziwei Xiao Date: Mon, 13 Nov 2023 16:41:44 -0800 Subject: gve: Fixes for napi_poll when budget is 0 Netpoll will explicilty pass the polling call with a budget of 0 to indicate it's clearing the Tx path only. For the gve_rx_poll and gve_xdp_poll, they were mistakenly taking the 0 budget as the indication to do all the work. Add check to avoid the rx path and xdp path being called when budget is 0. And also avoid napi_complete_done being called when budget is 0 for netpoll. Fixes: f5cedc84a30d ("gve: Add transmit and receive support") Signed-off-by: Ziwei Xiao Link: https://lore.kernel.org/r/20231114004144.2022268-1-ziweixiao@google.com Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/google/gve/gve_main.c | 8 +++++++- drivers/net/ethernet/google/gve/gve_rx.c | 4 ---- drivers/net/ethernet/google/gve/gve_tx.c | 4 ---- 3 files changed, 7 insertions(+), 9 deletions(-) diff --git a/drivers/net/ethernet/google/gve/gve_main.c b/drivers/net/ethernet/google/gve/gve_main.c index 276f996f95dc..2d42e733837b 100644 --- a/drivers/net/ethernet/google/gve/gve_main.c +++ b/drivers/net/ethernet/google/gve/gve_main.c @@ -254,10 +254,13 @@ static int gve_napi_poll(struct napi_struct *napi, int budget) if (block->tx) { if (block->tx->q_num < priv->tx_cfg.num_queues) reschedule |= gve_tx_poll(block, budget); - else + else if (budget) reschedule |= gve_xdp_poll(block, budget); } + if (!budget) + return 0; + if (block->rx) { work_done = gve_rx_poll(block, budget); reschedule |= work_done == budget; @@ -298,6 +301,9 @@ static int gve_napi_poll_dqo(struct napi_struct *napi, int budget) if (block->tx) reschedule |= gve_tx_poll_dqo(block, /*do_clean=*/true); + if (!budget) + return 0; + if (block->rx) { work_done = gve_rx_poll_dqo(block, budget); reschedule |= work_done == budget; diff --git a/drivers/net/ethernet/google/gve/gve_rx.c b/drivers/net/ethernet/google/gve/gve_rx.c index e84a066aa1a4..73655347902d 100644 --- a/drivers/net/ethernet/google/gve/gve_rx.c +++ b/drivers/net/ethernet/google/gve/gve_rx.c @@ -1007,10 +1007,6 @@ int gve_rx_poll(struct gve_notify_block *block, int budget) feat = block->napi.dev->features; - /* If budget is 0, do all the work */ - if (budget == 0) - budget = INT_MAX; - if (budget > 0) work_done = gve_clean_rx_done(rx, budget, feat); diff --git a/drivers/net/ethernet/google/gve/gve_tx.c b/drivers/net/ethernet/google/gve/gve_tx.c index 6957a865cff3..9f6ffc4a54f0 100644 --- a/drivers/net/ethernet/google/gve/gve_tx.c +++ b/drivers/net/ethernet/google/gve/gve_tx.c @@ -925,10 +925,6 @@ bool gve_xdp_poll(struct gve_notify_block *block, int budget) bool repoll; u32 to_do; - /* If budget is 0, do all the work */ - if (budget == 0) - budget = INT_MAX; - /* Find out how much work there is to be done */ nic_done = gve_tx_load_event_counter(priv, tx); to_do = min_t(u32, (nic_done - tx->done), budget); -- cgit v1.2.3 From 9fce92f050f448a0d1ddd9083ef967d9930f1e52 Mon Sep 17 00:00:00 2001 From: Paolo Abeni Date: Tue, 14 Nov 2023 00:16:13 +0100 Subject: mptcp: deal with large GSO size After the blamed commit below, the TCP sockets (and the MPTCP subflows) can build egress packets larger than 64K. That exceeds the maximum DSS data size, the length being misrepresent on the wire and the stream being corrupted, as later observed on the receiver: WARNING: CPU: 0 PID: 9696 at net/mptcp/protocol.c:705 __mptcp_move_skbs_from_subflow+0x2604/0x26e0 CPU: 0 PID: 9696 Comm: syz-executor.7 Not tainted 6.6.0-rc5-gcd8bdf563d46 #45 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2.el7 04/01/2014 netlink: 8 bytes leftover after parsing attributes in process `syz-executor.4'. RIP: 0010:__mptcp_move_skbs_from_subflow+0x2604/0x26e0 net/mptcp/protocol.c:705 RSP: 0018:ffffc90000006e80 EFLAGS: 00010246 RAX: ffffffff83e9f674 RBX: ffff88802f45d870 RCX: ffff888102ad0000 netlink: 8 bytes leftover after parsing attributes in process `syz-executor.4'. RDX: 0000000080000303 RSI: 0000000000013908 RDI: 0000000000003908 RBP: ffffc90000007110 R08: ffffffff83e9e078 R09: 1ffff1100e548c8a R10: dffffc0000000000 R11: ffffed100e548c8b R12: 0000000000013908 R13: dffffc0000000000 R14: 0000000000003908 R15: 000000000031cf29 FS: 00007f239c47e700(0000) GS:ffff88811b200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f239c45cd78 CR3: 000000006a66c006 CR4: 0000000000770ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000600 PKRU: 55555554 Call Trace: mptcp_data_ready+0x263/0xac0 net/mptcp/protocol.c:819 subflow_data_ready+0x268/0x6d0 net/mptcp/subflow.c:1409 tcp_data_queue+0x21a1/0x7a60 net/ipv4/tcp_input.c:5151 tcp_rcv_established+0x950/0x1d90 net/ipv4/tcp_input.c:6098 tcp_v6_do_rcv+0x554/0x12f0 net/ipv6/tcp_ipv6.c:1483 tcp_v6_rcv+0x2e26/0x3810 net/ipv6/tcp_ipv6.c:1749 ip6_protocol_deliver_rcu+0xd6b/0x1ae0 net/ipv6/ip6_input.c:438 ip6_input+0x1c5/0x470 net/ipv6/ip6_input.c:483 ipv6_rcv+0xef/0x2c0 include/linux/netfilter.h:304 __netif_receive_skb+0x1ea/0x6a0 net/core/dev.c:5532 process_backlog+0x353/0x660 net/core/dev.c:5974 __napi_poll+0xc6/0x5a0 net/core/dev.c:6536 net_rx_action+0x6a0/0xfd0 net/core/dev.c:6603 __do_softirq+0x184/0x524 kernel/softirq.c:553 do_softirq+0xdd/0x130 kernel/softirq.c:454 Address the issue explicitly bounding the maximum GSO size to what MPTCP actually allows. Reported-by: Christoph Paasch Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/450 Fixes: 7c4e983c4f3c ("net: allow gso_max_size to exceed 65536") Cc: stable@vger.kernel.org Signed-off-by: Paolo Abeni Reviewed-by: Mat Martineau Signed-off-by: Matthieu Baerts Link: https://lore.kernel.org/r/20231114-upstream-net-20231113-mptcp-misc-fixes-6-7-rc2-v1-1-7b9cd6a7b7f4@kernel.org Signed-off-by: Jakub Kicinski --- net/mptcp/protocol.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/net/mptcp/protocol.c b/net/mptcp/protocol.c index a0b8356cd8c5..66e947054945 100644 --- a/net/mptcp/protocol.c +++ b/net/mptcp/protocol.c @@ -1230,6 +1230,8 @@ static void mptcp_update_infinite_map(struct mptcp_sock *msk, mptcp_do_fallback(ssk); } +#define MPTCP_MAX_GSO_SIZE (GSO_LEGACY_MAX_SIZE - (MAX_TCP_HEADER + 1)) + static int mptcp_sendmsg_frag(struct sock *sk, struct sock *ssk, struct mptcp_data_frag *dfrag, struct mptcp_sendmsg_info *info) @@ -1256,6 +1258,8 @@ static int mptcp_sendmsg_frag(struct sock *sk, struct sock *ssk, return -EAGAIN; /* compute send limit */ + if (unlikely(ssk->sk_gso_max_size > MPTCP_MAX_GSO_SIZE)) + ssk->sk_gso_max_size = MPTCP_MAX_GSO_SIZE; info->mss_now = tcp_send_mss(ssk, &info->size_goal, info->flags); copy = info->size_goal; -- cgit v1.2.3 From d109a7767273d1706b541c22b83a0323823dfde4 Mon Sep 17 00:00:00 2001 From: Paolo Abeni Date: Tue, 14 Nov 2023 00:16:14 +0100 Subject: mptcp: fix possible NULL pointer dereference on close After the blamed commit below, the MPTCP release callback can dereference the first subflow pointer via __mptcp_set_connected() and send buffer auto-tuning. Such pointer is always expected to be valid, except at socket destruction time, when the first subflow is deleted and the pointer zeroed. If the connect event is handled by the release callback while the msk socket is finally released, MPTCP hits the following splat: general protection fault, probably for non-canonical address 0xdffffc00000000f2: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000790-0x0000000000000797] CPU: 1 PID: 26719 Comm: syz-executor.2 Not tainted 6.6.0-syzkaller-10102-gff269e2cd5ad #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/09/2023 RIP: 0010:mptcp_subflow_ctx net/mptcp/protocol.h:542 [inline] RIP: 0010:__mptcp_propagate_sndbuf net/mptcp/protocol.h:813 [inline] RIP: 0010:__mptcp_set_connected+0x57/0x3e0 net/mptcp/subflow.c:424 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffffffff8a62323c RDX: 00000000000000f2 RSI: ffffffff8a630116 RDI: 0000000000000790 RBP: ffff88803334b100 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000034 R12: ffff88803334b198 R13: ffff888054f0b018 R14: 0000000000000000 R15: ffff88803334b100 FS: 0000000000000000(0000) GS:ffff8880b9900000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fbcb4f75198 CR3: 000000006afb5000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: mptcp_release_cb+0xa2c/0xc40 net/mptcp/protocol.c:3405 release_sock+0xba/0x1f0 net/core/sock.c:3537 mptcp_close+0x32/0xf0 net/mptcp/protocol.c:3084 inet_release+0x132/0x270 net/ipv4/af_inet.c:433 inet6_release+0x4f/0x70 net/ipv6/af_inet6.c:485 __sock_release+0xae/0x260 net/socket.c:659 sock_close+0x1c/0x20 net/socket.c:1419 __fput+0x270/0xbb0 fs/file_table.c:394 task_work_run+0x14d/0x240 kernel/task_work.c:180 exit_task_work include/linux/task_work.h:38 [inline] do_exit+0xa92/0x2a20 kernel/exit.c:876 do_group_exit+0xd4/0x2a0 kernel/exit.c:1026 get_signal+0x23ba/0x2790 kernel/signal.c:2900 arch_do_signal_or_restart+0x90/0x7f0 arch/x86/kernel/signal.c:309 exit_to_user_mode_loop kernel/entry/common.c:168 [inline] exit_to_user_mode_prepare+0x11f/0x240 kernel/entry/common.c:204 __syscall_exit_to_user_mode_work kernel/entry/common.c:285 [inline] syscall_exit_to_user_mode+0x1d/0x60 kernel/entry/common.c:296 do_syscall_64+0x4b/0x110 arch/x86/entry/common.c:88 entry_SYSCALL_64_after_hwframe+0x63/0x6b RIP: 0033:0x7fb515e7cae9 Code: Unable to access opcode bytes at 0x7fb515e7cabf. RSP: 002b:00007fb516c560c8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: 000000000000003c RBX: 00007fb515f9c120 RCX: 00007fb515e7cae9 RDX: 0000000000000000 RSI: 0000000020000140 RDI: 0000000000000006 RBP: 00007fb515ec847a R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 000000000000006e R14: 00007fb515f9c120 R15: 00007ffc631eb968 To avoid sparkling unneeded conditionals, address the issue explicitly checking msk->first only in the critical place. Fixes: 8005184fd1ca ("mptcp: refactor sndbuf auto-tuning") Cc: stable@vger.kernel.org Reported-by: Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/454 Reported-by: Eric Dumazet Closes: https://lore.kernel.org/netdev/CANn89iLZUA6S2a=K8GObnS62KK6Jt4B7PsAs7meMFooM8xaTgw@mail.gmail.com/ Signed-off-by: Paolo Abeni Reviewed-by: Eric Dumazet Reviewed-by: Mat Martineau Signed-off-by: Matthieu Baerts Link: https://lore.kernel.org/r/20231114-upstream-net-20231113-mptcp-misc-fixes-6-7-rc2-v1-2-7b9cd6a7b7f4@kernel.org Signed-off-by: Jakub Kicinski --- net/mptcp/protocol.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/net/mptcp/protocol.c b/net/mptcp/protocol.c index 66e947054945..bc81ea53a049 100644 --- a/net/mptcp/protocol.c +++ b/net/mptcp/protocol.c @@ -3402,10 +3402,11 @@ static void mptcp_release_cb(struct sock *sk) if (__test_and_clear_bit(MPTCP_CLEAN_UNA, &msk->cb_flags)) __mptcp_clean_una_wakeup(sk); if (unlikely(msk->cb_flags)) { - /* be sure to set the current sk state before tacking actions - * depending on sk_state, that is processing MPTCP_ERROR_REPORT + /* be sure to set the current sk state before taking actions + * depending on sk_state (MPTCP_ERROR_REPORT) + * On sk release avoid actions depending on the first subflow */ - if (__test_and_clear_bit(MPTCP_CONNECTED, &msk->cb_flags)) + if (__test_and_clear_bit(MPTCP_CONNECTED, &msk->cb_flags) && msk->first) __mptcp_set_connected(sk); if (__test_and_clear_bit(MPTCP_ERROR_REPORT, &msk->cb_flags)) __mptcp_error_report(sk); -- cgit v1.2.3 From 8df220b29282e8b450ea57be62e1eccd4996837c Mon Sep 17 00:00:00 2001 From: Geliang Tang Date: Tue, 14 Nov 2023 00:16:15 +0100 Subject: mptcp: add validity check for sending RM_ADDR This patch adds the validity check for sending RM_ADDRs for userspace PM in mptcp_pm_remove_addrs(), only send a RM_ADDR when the address is in the anno_list or conn_list. Fixes: 8b1c94da1e48 ("mptcp: only send RM_ADDR in nl_cmd_remove") Cc: stable@vger.kernel.org Signed-off-by: Geliang Tang Reviewed-by: Mat Martineau Signed-off-by: Matthieu Baerts Link: https://lore.kernel.org/r/20231114-upstream-net-20231113-mptcp-misc-fixes-6-7-rc2-v1-3-7b9cd6a7b7f4@kernel.org Signed-off-by: Jakub Kicinski --- net/mptcp/pm_netlink.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/net/mptcp/pm_netlink.c b/net/mptcp/pm_netlink.c index 1529ec358815..bf4d96f6f99a 100644 --- a/net/mptcp/pm_netlink.c +++ b/net/mptcp/pm_netlink.c @@ -1515,8 +1515,9 @@ void mptcp_pm_remove_addrs(struct mptcp_sock *msk, struct list_head *rm_list) struct mptcp_pm_addr_entry *entry; list_for_each_entry(entry, rm_list, list) { - remove_anno_list_by_saddr(msk, &entry->addr); - if (alist.nr < MPTCP_RM_IDS_MAX) + if ((remove_anno_list_by_saddr(msk, &entry->addr) || + lookup_subflow_by_saddr(&msk->conn_list, &entry->addr)) && + alist.nr < MPTCP_RM_IDS_MAX) alist.ids[alist.nr++] = entry->addr.id; } -- cgit v1.2.3 From 7679d34f97b7a09fd565f5729f79fd61b7c55329 Mon Sep 17 00:00:00 2001 From: Paolo Abeni Date: Tue, 14 Nov 2023 00:16:16 +0100 Subject: mptcp: fix setsockopt(IP_TOS) subflow locking The MPTCP implementation of the IP_TOS socket option uses the lockless variant of the TOS manipulation helper and does not hold such lock at the helper invocation time. Add the required locking. Fixes: ffcacff87cd6 ("mptcp: Support for IP_TOS for MPTCP setsockopt()") Cc: stable@vger.kernel.org Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/457 Signed-off-by: Paolo Abeni Reviewed-by: Mat Martineau Signed-off-by: Matthieu Baerts Link: https://lore.kernel.org/r/20231114-upstream-net-20231113-mptcp-misc-fixes-6-7-rc2-v1-4-7b9cd6a7b7f4@kernel.org Signed-off-by: Jakub Kicinski --- net/mptcp/sockopt.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/net/mptcp/sockopt.c b/net/mptcp/sockopt.c index 77f5e8932abf..353680733700 100644 --- a/net/mptcp/sockopt.c +++ b/net/mptcp/sockopt.c @@ -738,8 +738,11 @@ static int mptcp_setsockopt_v4_set_tos(struct mptcp_sock *msk, int optname, val = READ_ONCE(inet_sk(sk)->tos); mptcp_for_each_subflow(msk, subflow) { struct sock *ssk = mptcp_subflow_tcp_sock(subflow); + bool slow; + slow = lock_sock_fast(ssk); __ip_sock_set_tos(ssk, val); + unlock_sock_fast(ssk, slow); } release_sock(sk); -- cgit v1.2.3 From 7cefbe5e1dacc7236caa77e9d072423f21422fe2 Mon Sep 17 00:00:00 2001 From: Paolo Abeni Date: Tue, 14 Nov 2023 00:16:17 +0100 Subject: selftests: mptcp: fix fastclose with csum failure Running the mp_join selftest manually with the following command line: ./mptcp_join.sh -z -C leads to some failures: 002 fastclose server test # ... rtx [fail] got 1 MP_RST[s] TX expected 0 # ... rstrx [fail] got 1 MP_RST[s] RX expected 0 The problem is really in the wrong expectations for the RST checks implied by the csum validation. Note that the same check is repeated explicitly in the same test-case, with the correct expectation and pass successfully. Address the issue explicitly setting the correct expectation for the failing checks. Reported-by: Xiumei Mu Fixes: 6bf41020b72b ("selftests: mptcp: update and extend fastclose test-cases") Cc: stable@vger.kernel.org Signed-off-by: Paolo Abeni Reviewed-by: Matthieu Baerts Signed-off-by: Matthieu Baerts Link: https://lore.kernel.org/r/20231114-upstream-net-20231113-mptcp-misc-fixes-6-7-rc2-v1-5-7b9cd6a7b7f4@kernel.org Signed-off-by: Jakub Kicinski --- tools/testing/selftests/net/mptcp/mptcp_join.sh | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/net/mptcp/mptcp_join.sh b/tools/testing/selftests/net/mptcp/mptcp_join.sh index 75a2438efdf3..3c94f2f194d6 100755 --- a/tools/testing/selftests/net/mptcp/mptcp_join.sh +++ b/tools/testing/selftests/net/mptcp/mptcp_join.sh @@ -3240,7 +3240,7 @@ fastclose_tests() if reset_check_counter "fastclose server test" "MPTcpExtMPFastcloseRx"; then test_linkfail=1024 fastclose=server \ run_tests $ns1 $ns2 10.0.1.1 - chk_join_nr 0 0 0 + chk_join_nr 0 0 0 0 0 0 1 chk_fclose_nr 1 1 invert chk_rst_nr 1 1 fi -- cgit v1.2.3 From 006ccc3090e2f30f5f97857f3946312692a5279e Mon Sep 17 00:00:00 2001 From: Kent Overstreet Date: Sat, 4 Nov 2023 22:54:26 -0400 Subject: bcachefs: Kill journal pre-reservations This deletes the complicated and somewhat expensive journal pre-reservation machinery in favor of just using journal watermarks: when the journal is more than half full, we run journal reclaim more aggressively, and when the journal is more than 3/4s full we only allow journal reclaim to get new journal reservations. Signed-off-by: Kent Overstreet --- fs/bcachefs/btree_iter.c | 2 - fs/bcachefs/btree_key_cache.c | 14 ------ fs/bcachefs/btree_trans_commit.c | 36 +------------- fs/bcachefs/btree_types.h | 3 -- fs/bcachefs/btree_update_interior.c | 30 ------------ fs/bcachefs/btree_update_interior.h | 1 - fs/bcachefs/journal.c | 31 ------------ fs/bcachefs/journal.h | 98 ------------------------------------- fs/bcachefs/journal_reclaim.c | 42 ++++++---------- fs/bcachefs/journal_types.h | 26 ---------- fs/bcachefs/trace.h | 11 +---- 11 files changed, 19 insertions(+), 275 deletions(-) diff --git a/fs/bcachefs/btree_iter.c b/fs/bcachefs/btree_iter.c index c2adf3fbb0b3..6fa90bcd7016 100644 --- a/fs/bcachefs/btree_iter.c +++ b/fs/bcachefs/btree_iter.c @@ -3087,8 +3087,6 @@ void bch2_trans_put(struct btree_trans *trans) srcu_read_unlock(&c->btree_trans_barrier, trans->srcu_idx); } - bch2_journal_preres_put(&c->journal, &trans->journal_preres); - kfree(trans->extra_journal_entries.data); if (trans->fs_usage_deltas) { diff --git a/fs/bcachefs/btree_key_cache.c b/fs/bcachefs/btree_key_cache.c index b3305a04d808..37fbf22de8fc 100644 --- a/fs/bcachefs/btree_key_cache.c +++ b/fs/bcachefs/btree_key_cache.c @@ -672,7 +672,6 @@ static int btree_key_cache_flush_pos(struct btree_trans *trans, goto out; bch2_journal_pin_drop(j, &ck->journal); - bch2_journal_preres_put(j, &ck->res); BUG_ON(!btree_node_locked(c_iter.path, 0)); @@ -770,18 +769,6 @@ bool bch2_btree_insert_key_cached(struct btree_trans *trans, BUG_ON(insert->k.u64s > ck->u64s); - if (likely(!(flags & BTREE_INSERT_JOURNAL_REPLAY))) { - int difference; - - BUG_ON(jset_u64s(insert->k.u64s) > trans->journal_preres.u64s); - - difference = jset_u64s(insert->k.u64s) - ck->res.u64s; - if (difference > 0) { - trans->journal_preres.u64s -= difference; - ck->res.u64s += difference; - } - } - bkey_copy(ck->k, insert); ck->valid = true; @@ -1006,7 +993,6 @@ void bch2_fs_btree_key_cache_exit(struct btree_key_cache *bc) cond_resched(); bch2_journal_pin_drop(&c->journal, &ck->journal); - bch2_journal_preres_put(&c->journal, &ck->res); list_del(&ck->list); kfree(ck->k); diff --git a/fs/bcachefs/btree_trans_commit.c b/fs/bcachefs/btree_trans_commit.c index 55a120eb8692..12907beda98c 100644 --- a/fs/bcachefs/btree_trans_commit.c +++ b/fs/bcachefs/btree_trans_commit.c @@ -323,17 +323,6 @@ static inline void btree_insert_entry_checks(struct btree_trans *trans, bch2_snapshot_is_internal_node(trans->c, i->k->k.p.snapshot)); } -static noinline int -bch2_trans_journal_preres_get_cold(struct btree_trans *trans, unsigned flags, - unsigned long trace_ip) -{ - return drop_locks_do(trans, - bch2_journal_preres_get(&trans->c->journal, - &trans->journal_preres, - trans->journal_preres_u64s, - (flags & BCH_WATERMARK_MASK))); -} - static __always_inline int bch2_trans_journal_res_get(struct btree_trans *trans, unsigned flags) { @@ -882,14 +871,6 @@ static inline int do_bch2_trans_commit(struct btree_trans *trans, unsigned flags } } - ret = bch2_journal_preres_get(&c->journal, - &trans->journal_preres, trans->journal_preres_u64s, - (flags & BCH_WATERMARK_MASK)|JOURNAL_RES_GET_NONBLOCK); - if (unlikely(ret == -BCH_ERR_journal_preres_get_blocked)) - ret = bch2_trans_journal_preres_get_cold(trans, flags, trace_ip); - if (unlikely(ret)) - return ret; - ret = bch2_trans_lock_write(trans); if (unlikely(ret)) return ret; @@ -1052,7 +1033,6 @@ int __bch2_trans_commit(struct btree_trans *trans, unsigned flags) struct bch_fs *c = trans->c; struct btree_insert_entry *i = NULL; struct btree_write_buffered_key *wb; - unsigned u64s; int ret = 0; if (!trans->nr_updates && @@ -1112,13 +1092,8 @@ int __bch2_trans_commit(struct btree_trans *trans, unsigned flags) EBUG_ON(test_bit(BCH_FS_CLEAN_SHUTDOWN, &c->flags)); - memset(&trans->journal_preres, 0, sizeof(trans->journal_preres)); - trans->journal_u64s = trans->extra_journal_entries.nr; - trans->journal_preres_u64s = 0; - trans->journal_transaction_names = READ_ONCE(c->opts.journal_transaction_names); - if (trans->journal_transaction_names) trans->journal_u64s += jset_u64s(JSET_ENTRY_LOG_U64s); @@ -1134,16 +1109,11 @@ int __bch2_trans_commit(struct btree_trans *trans, unsigned flags) if (i->key_cache_already_flushed) continue; - /* we're going to journal the key being updated: */ - u64s = jset_u64s(i->k->k.u64s); - if (i->cached && - likely(!(flags & BTREE_INSERT_JOURNAL_REPLAY))) - trans->journal_preres_u64s += u64s; - if (i->flags & BTREE_UPDATE_NOJOURNAL) continue; - trans->journal_u64s += u64s; + /* we're going to journal the key being updated: */ + trans->journal_u64s += jset_u64s(i->k->k.u64s); /* and we're also going to log the overwrite: */ if (trans->journal_transaction_names) @@ -1175,8 +1145,6 @@ retry: trace_and_count(c, transaction_commit, trans, _RET_IP_); out: - bch2_journal_preres_put(&c->journal, &trans->journal_preres); - if (likely(!(flags & BTREE_INSERT_NOCHECK_RW))) bch2_write_ref_put(c, BCH_WRITE_REF_trans); out_reset: diff --git a/fs/bcachefs/btree_types.h b/fs/bcachefs/btree_types.h index f3669fa68591..6fbd4ef3df6b 100644 --- a/fs/bcachefs/btree_types.h +++ b/fs/bcachefs/btree_types.h @@ -327,7 +327,6 @@ struct bkey_cached { struct rhash_head hash; struct list_head list; - struct journal_preres res; struct journal_entry_pin journal; u64 seq; @@ -441,11 +440,9 @@ struct btree_trans { struct journal_entry_pin *journal_pin; struct journal_res journal_res; - struct journal_preres journal_preres; u64 *journal_seq; struct disk_reservation *disk_res; unsigned journal_u64s; - unsigned journal_preres_u64s; struct replicas_delta_list *fs_usage_deltas; }; diff --git a/fs/bcachefs/btree_update_interior.c b/fs/bcachefs/btree_update_interior.c index 39c2db68123b..76f27bc9fa24 100644 --- a/fs/bcachefs/btree_update_interior.c +++ b/fs/bcachefs/btree_update_interior.c @@ -513,8 +513,6 @@ static void bch2_btree_update_free(struct btree_update *as, struct btree_trans * up_read(&c->gc_lock); as->took_gc_lock = false; - bch2_journal_preres_put(&c->journal, &as->journal_preres); - bch2_journal_pin_drop(&c->journal, &as->journal); bch2_journal_pin_flush(&c->journal, &as->journal); bch2_disk_reservation_put(c, &as->disk_res); @@ -734,8 +732,6 @@ err: bch2_journal_pin_drop(&c->journal, &as->journal); - bch2_journal_preres_put(&c->journal, &as->journal_preres); - mutex_lock(&c->btree_interior_update_lock); for (i = 0; i < as->nr_new_nodes; i++) { b = as->new_nodes[i]; @@ -1047,7 +1043,6 @@ bch2_btree_update_start(struct btree_trans *trans, struct btree_path *path, unsigned nr_nodes[2] = { 0, 0 }; unsigned update_level = level; enum bch_watermark watermark = flags & BCH_WATERMARK_MASK; - unsigned journal_flags = 0; int ret = 0; u32 restart_count = trans->restart_count; @@ -1061,10 +1056,6 @@ bch2_btree_update_start(struct btree_trans *trans, struct btree_path *path, flags &= ~BCH_WATERMARK_MASK; flags |= watermark; - if (flags & BTREE_INSERT_JOURNAL_RECLAIM) - journal_flags |= JOURNAL_RES_GET_NONBLOCK; - journal_flags |= watermark; - while (1) { nr_nodes[!!update_level] += 1 + split; update_level++; @@ -1129,27 +1120,6 @@ bch2_btree_update_start(struct btree_trans *trans, struct btree_path *path, if (ret) goto err; - ret = bch2_journal_preres_get(&c->journal, &as->journal_preres, - BTREE_UPDATE_JOURNAL_RES, - journal_flags|JOURNAL_RES_GET_NONBLOCK); - if (ret) { - if (flags & BTREE_INSERT_JOURNAL_RECLAIM) { - ret = -BCH_ERR_journal_reclaim_would_deadlock; - goto err; - } - - ret = drop_locks_do(trans, - bch2_journal_preres_get(&c->journal, &as->journal_preres, - BTREE_UPDATE_JOURNAL_RES, - journal_flags)); - if (ret == -BCH_ERR_journal_preres_get_blocked) { - trace_and_count(c, trans_restart_journal_preres_get, trans, _RET_IP_, journal_flags); - ret = btree_trans_restart(trans, BCH_ERR_transaction_restart_journal_preres_get); - } - if (ret) - goto err; - } - ret = bch2_disk_reservation_get(c, &as->disk_res, (nr_nodes[0] + nr_nodes[1]) * btree_sectors(c), c->opts.metadata_replicas, diff --git a/fs/bcachefs/btree_update_interior.h b/fs/bcachefs/btree_update_interior.h index 4df21512d640..031076e75fa1 100644 --- a/fs/bcachefs/btree_update_interior.h +++ b/fs/bcachefs/btree_update_interior.h @@ -55,7 +55,6 @@ struct btree_update { unsigned update_level; struct disk_reservation disk_res; - struct journal_preres journal_preres; /* * BTREE_INTERIOR_UPDATING_NODE: diff --git a/fs/bcachefs/journal.c b/fs/bcachefs/journal.c index 5b5d69f2316b..23a9b7845d11 100644 --- a/fs/bcachefs/journal.c +++ b/fs/bcachefs/journal.c @@ -526,36 +526,6 @@ int bch2_journal_res_get_slowpath(struct journal *j, struct journal_res *res, return ret; } -/* journal_preres: */ - -static bool journal_preres_available(struct journal *j, - struct journal_preres *res, - unsigned new_u64s, - unsigned flags) -{ - bool ret = bch2_journal_preres_get_fast(j, res, new_u64s, flags, true); - - if (!ret && mutex_trylock(&j->reclaim_lock)) { - bch2_journal_reclaim(j); - mutex_unlock(&j->reclaim_lock); - } - - return ret; -} - -int __bch2_journal_preres_get(struct journal *j, - struct journal_preres *res, - unsigned new_u64s, - unsigned flags) -{ - int ret; - - closure_wait_event(&j->preres_wait, - (ret = bch2_journal_error(j)) || - journal_preres_available(j, res, new_u64s, flags)); - return ret; -} - /* journal_entry_res: */ void bch2_journal_entry_res_resize(struct journal *j, @@ -1306,7 +1276,6 @@ void __bch2_journal_debug_to_text(struct printbuf *out, struct journal *j) prt_printf(out, "last_seq:\t\t%llu\n", journal_last_seq(j)); prt_printf(out, "last_seq_ondisk:\t%llu\n", j->last_seq_ondisk); prt_printf(out, "flushed_seq_ondisk:\t%llu\n", j->flushed_seq_ondisk); - prt_printf(out, "prereserved:\t\t%u/%u\n", j->prereserved.reserved, j->prereserved.remaining); prt_printf(out, "watermark:\t\t%s\n", bch2_watermarks[j->watermark]); prt_printf(out, "each entry reserved:\t%u\n", j->entry_u64s_reserved); prt_printf(out, "nr flush writes:\t%llu\n", j->nr_flush_writes); diff --git a/fs/bcachefs/journal.h b/fs/bcachefs/journal.h index 011711e99c8d..c85d01cf4948 100644 --- a/fs/bcachefs/journal.h +++ b/fs/bcachefs/journal.h @@ -395,104 +395,6 @@ out: return 0; } -/* journal_preres: */ - -static inline void journal_set_watermark(struct journal *j) -{ - union journal_preres_state s = READ_ONCE(j->prereserved); - unsigned watermark = BCH_WATERMARK_stripe; - - if (fifo_free(&j->pin) < j->pin.size / 4) - watermark = max_t(unsigned, watermark, BCH_WATERMARK_copygc); - if (fifo_free(&j->pin) < j->pin.size / 8) - watermark = max_t(unsigned, watermark, BCH_WATERMARK_reclaim); - - if (s.reserved > s.remaining) - watermark = max_t(unsigned, watermark, BCH_WATERMARK_copygc); - if (!s.remaining) - watermark = max_t(unsigned, watermark, BCH_WATERMARK_reclaim); - - if (watermark == j->watermark) - return; - - swap(watermark, j->watermark); - if (watermark > j->watermark) - journal_wake(j); -} - -static inline void bch2_journal_preres_put(struct journal *j, - struct journal_preres *res) -{ - union journal_preres_state s = { .reserved = res->u64s }; - - if (!res->u64s) - return; - - s.v = atomic64_sub_return(s.v, &j->prereserved.counter); - res->u64s = 0; - - if (unlikely(s.waiting)) { - clear_bit(ilog2((((union journal_preres_state) { .waiting = 1 }).v)), - (unsigned long *) &j->prereserved.v); - closure_wake_up(&j->preres_wait); - } - - if (s.reserved <= s.remaining && j->watermark) - journal_set_watermark(j); -} - -int __bch2_journal_preres_get(struct journal *, - struct journal_preres *, unsigned, unsigned); - -static inline int bch2_journal_preres_get_fast(struct journal *j, - struct journal_preres *res, - unsigned new_u64s, - unsigned flags, - bool set_waiting) -{ - int d = new_u64s - res->u64s; - union journal_preres_state old, new; - u64 v = atomic64_read(&j->prereserved.counter); - enum bch_watermark watermark = flags & BCH_WATERMARK_MASK; - int ret; - - do { - old.v = new.v = v; - ret = 0; - - if (watermark == BCH_WATERMARK_reclaim || - new.reserved + d < new.remaining) { - new.reserved += d; - ret = 1; - } else if (set_waiting && !new.waiting) - new.waiting = true; - else - return 0; - } while ((v = atomic64_cmpxchg(&j->prereserved.counter, - old.v, new.v)) != old.v); - - if (ret) - res->u64s += d; - return ret; -} - -static inline int bch2_journal_preres_get(struct journal *j, - struct journal_preres *res, - unsigned new_u64s, - unsigned flags) -{ - if (new_u64s <= res->u64s) - return 0; - - if (bch2_journal_preres_get_fast(j, res, new_u64s, flags, false)) - return 0; - - if (flags & JOURNAL_RES_GET_NONBLOCK) - return -BCH_ERR_journal_preres_get_blocked; - - return __bch2_journal_preres_get(j, res, new_u64s, flags); -} - /* journal_entry_res: */ void bch2_journal_entry_res_resize(struct journal *, diff --git a/fs/bcachefs/journal_reclaim.c b/fs/bcachefs/journal_reclaim.c index 9a584aaaa2eb..e63c6eda86af 100644 --- a/fs/bcachefs/journal_reclaim.c +++ b/fs/bcachefs/journal_reclaim.c @@ -50,16 +50,21 @@ unsigned bch2_journal_dev_buckets_available(struct journal *j, return available; } -static void journal_set_remaining(struct journal *j, unsigned u64s_remaining) +static inline void journal_set_watermark(struct journal *j, bool low_on_space) { - union journal_preres_state old, new; - u64 v = atomic64_read(&j->prereserved.counter); + unsigned watermark = BCH_WATERMARK_stripe; - do { - old.v = new.v = v; - new.remaining = u64s_remaining; - } while ((v = atomic64_cmpxchg(&j->prereserved.counter, - old.v, new.v)) != old.v); + if (low_on_space) + watermark = max_t(unsigned, watermark, BCH_WATERMARK_reclaim); + if (fifo_free(&j->pin) < j->pin.size / 4) + watermark = max_t(unsigned, watermark, BCH_WATERMARK_reclaim); + + if (watermark == j->watermark) + return; + + swap(watermark, j->watermark); + if (watermark > j->watermark) + journal_wake(j); } static struct journal_space @@ -162,7 +167,6 @@ void bch2_journal_space_available(struct journal *j) struct bch_fs *c = container_of(j, struct bch_fs, journal); struct bch_dev *ca; unsigned clean, clean_ondisk, total; - s64 u64s_remaining = 0; unsigned max_entry_size = min(j->buf[0].buf_size >> 9, j->buf[1].buf_size >> 9); unsigned i, nr_online = 0, nr_devs_want; @@ -222,16 +226,10 @@ void bch2_journal_space_available(struct journal *j) else clear_bit(JOURNAL_MAY_SKIP_FLUSH, &j->flags); - u64s_remaining = (u64) clean << 6; - u64s_remaining -= (u64) total << 3; - u64s_remaining = max(0LL, u64s_remaining); - u64s_remaining /= 4; - u64s_remaining = min_t(u64, u64s_remaining, U32_MAX); + journal_set_watermark(j, clean * 4 <= total); out: j->cur_entry_sectors = !ret ? j->space[journal_space_discarded].next_entry : 0; j->cur_entry_error = ret; - journal_set_remaining(j, u64s_remaining); - journal_set_watermark(j); if (!ret) journal_wake(j); @@ -555,11 +553,6 @@ static u64 journal_seq_to_flush(struct journal *j) /* Try to keep the journal at most half full: */ nr_buckets = ja->nr / 2; - /* And include pre-reservations: */ - nr_buckets += DIV_ROUND_UP(j->prereserved.reserved, - (ca->mi.bucket_size << 6) - - journal_entry_overhead(j)); - nr_buckets = min(nr_buckets, ja->nr); bucket_to_flush = (ja->cur_idx + nr_buckets) % ja->nr; @@ -638,10 +631,7 @@ static int __bch2_journal_reclaim(struct journal *j, bool direct, bool kicked) msecs_to_jiffies(c->opts.journal_reclaim_delay))) min_nr = 1; - if (j->prereserved.reserved * 4 > j->prereserved.remaining) - min_nr = 1; - - if (fifo_free(&j->pin) <= 32) + if (j->watermark != BCH_WATERMARK_stripe) min_nr = 1; if (atomic_read(&c->btree_cache.dirty) * 2 > c->btree_cache.used) @@ -652,8 +642,6 @@ static int __bch2_journal_reclaim(struct journal *j, bool direct, bool kicked) trace_and_count(c, journal_reclaim_start, c, direct, kicked, min_nr, min_key_cache, - j->prereserved.reserved, - j->prereserved.remaining, atomic_read(&c->btree_cache.dirty), c->btree_cache.used, atomic_long_read(&c->btree_key_cache.nr_dirty), diff --git a/fs/bcachefs/journal_types.h b/fs/bcachefs/journal_types.h index 42504e16acb6..a756b69582e3 100644 --- a/fs/bcachefs/journal_types.h +++ b/fs/bcachefs/journal_types.h @@ -76,14 +76,6 @@ struct journal_res { u64 seq; }; -/* - * For reserving space in the journal prior to getting a reservation on a - * particular journal entry: - */ -struct journal_preres { - unsigned u64s; -}; - union journal_res_state { struct { atomic64_t counter; @@ -104,22 +96,6 @@ union journal_res_state { }; }; -union journal_preres_state { - struct { - atomic64_t counter; - }; - - struct { - u64 v; - }; - - struct { - u64 waiting:1, - reserved:31, - remaining:32; - }; -}; - /* bytes: */ #define JOURNAL_ENTRY_SIZE_MIN (64U << 10) /* 64k */ #define JOURNAL_ENTRY_SIZE_MAX (4U << 20) /* 4M */ @@ -180,8 +156,6 @@ struct journal { union journal_res_state reservations; enum bch_watermark watermark; - union journal_preres_state prereserved; - } __aligned(SMP_CACHE_BYTES); unsigned long flags; diff --git a/fs/bcachefs/trace.h b/fs/bcachefs/trace.h index 893304a1f06e..7857671159b4 100644 --- a/fs/bcachefs/trace.h +++ b/fs/bcachefs/trace.h @@ -196,10 +196,9 @@ DEFINE_EVENT(bio, journal_write, TRACE_EVENT(journal_reclaim_start, TP_PROTO(struct bch_fs *c, bool direct, bool kicked, u64 min_nr, u64 min_key_cache, - u64 prereserved, u64 prereserved_total, u64 btree_cache_dirty, u64 btree_cache_total, u64 btree_key_cache_dirty, u64 btree_key_cache_total), - TP_ARGS(c, direct, kicked, min_nr, min_key_cache, prereserved, prereserved_total, + TP_ARGS(c, direct, kicked, min_nr, min_key_cache, btree_cache_dirty, btree_cache_total, btree_key_cache_dirty, btree_key_cache_total), @@ -209,8 +208,6 @@ TRACE_EVENT(journal_reclaim_start, __field(bool, kicked ) __field(u64, min_nr ) __field(u64, min_key_cache ) - __field(u64, prereserved ) - __field(u64, prereserved_total ) __field(u64, btree_cache_dirty ) __field(u64, btree_cache_total ) __field(u64, btree_key_cache_dirty ) @@ -223,22 +220,18 @@ TRACE_EVENT(journal_reclaim_start, __entry->kicked = kicked; __entry->min_nr = min_nr; __entry->min_key_cache = min_key_cache; - __entry->prereserved = prereserved; - __entry->prereserved_total = prereserved_total; __entry->btree_cache_dirty = btree_cache_dirty; __entry->btree_cache_total = btree_cache_total; __entry->btree_key_cache_dirty = btree_key_cache_dirty; __entry->btree_key_cache_total = btree_key_cache_total; ), - TP_printk("%d,%d direct %u kicked %u min %llu key cache %llu prereserved %llu/%llu btree cache %llu/%llu key cache %llu/%llu", + TP_printk("%d,%d direct %u kicked %u min %llu key cache %llu btree cache %llu/%llu key cache %llu/%llu", MAJOR(__entry->dev), MINOR(__entry->dev), __entry->direct, __entry->kicked, __entry->min_nr, __entry->min_key_cache, - __entry->prereserved, - __entry->prereserved_total, __entry->btree_cache_dirty, __entry->btree_cache_total, __entry->btree_key_cache_dirty, -- cgit v1.2.3 From 069749688ea4bbaeff0ca3b229b443ea96b03757 Mon Sep 17 00:00:00 2001 From: Kent Overstreet Date: Sat, 11 Nov 2023 22:15:59 -0500 Subject: bcachefs: Fix iterator leak in may_delete_deleted_inode() may_delete_deleted_inode() was returning without exiting a btree iterator, eventually causing propagate_key_to_snaphot_leaves() to go into an infinite loop hitting btree_trans_too_many_iters(). Signed-off-by: Kent Overstreet --- fs/bcachefs/inode.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/bcachefs/inode.c b/fs/bcachefs/inode.c index def77f2d8802..dab12c14d1ad 100644 --- a/fs/bcachefs/inode.c +++ b/fs/bcachefs/inode.c @@ -1134,7 +1134,7 @@ static int may_delete_deleted_inode(struct btree_trans *trans, * unlinked inodes in the snapshot leaves: */ *need_another_pass = true; - return 0; + goto out; } ret = 1; -- cgit v1.2.3 From b783fc4d1366658200bf759e1010655a9e2e145c Mon Sep 17 00:00:00 2001 From: Daniel J Blueman Date: Sun, 12 Nov 2023 00:38:41 +0000 Subject: bcachefs: Fix potential sleeping during mount During mount, bcachefs mount option processing may sleep while allocating a string buffer. Fix this by reference counting in order to take the atomic path. Signed-off-by: Daniel J Blueman Signed-off-by: Kent Overstreet --- fs/bcachefs/disk_groups.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/fs/bcachefs/disk_groups.c b/fs/bcachefs/disk_groups.c index 1f334124055b..4d0cb0ccff32 100644 --- a/fs/bcachefs/disk_groups.c +++ b/fs/bcachefs/disk_groups.c @@ -555,6 +555,7 @@ void bch2_target_to_text(struct printbuf *out, struct bch_fs *c, unsigned v) case TARGET_DEV: { struct bch_dev *ca; + out->atomic++; rcu_read_lock(); ca = t.dev < c->sb.nr_devices ? rcu_dereference(c->devs[t.dev]) @@ -570,6 +571,7 @@ void bch2_target_to_text(struct printbuf *out, struct bch_fs *c, unsigned v) } rcu_read_unlock(); + out->atomic--; break; } case TARGET_GROUP: -- cgit v1.2.3 From 178c4873fd06c0361d260547ce70fcdc29b74809 Mon Sep 17 00:00:00 2001 From: Kent Overstreet Date: Sun, 12 Nov 2023 14:15:35 -0500 Subject: bcachefs: Fix error path in bch2_mount() This fixes a bug discovered by generic/388 where sb->s_fs_info was NULL while the superblock was still active - the error path was entirely fubar, and was trying to do something unclear and unecessary. Signed-off-by: Kent Overstreet --- fs/bcachefs/fs.c | 8 +------- 1 file changed, 1 insertion(+), 7 deletions(-) diff --git a/fs/bcachefs/fs.c b/fs/bcachefs/fs.c index 166d8d8abe68..8ef817304e4a 100644 --- a/fs/bcachefs/fs.c +++ b/fs/bcachefs/fs.c @@ -1922,10 +1922,7 @@ out: return dget(sb->s_root); err_put_super: - sb->s_fs_info = NULL; - c->vfs_sb = NULL; deactivate_locked_super(sb); - bch2_fs_stop(c); return ERR_PTR(bch2_err_class(ret)); } @@ -1933,11 +1930,8 @@ static void bch2_kill_sb(struct super_block *sb) { struct bch_fs *c = sb->s_fs_info; - if (c) - c->vfs_sb = NULL; generic_shutdown_super(sb); - if (c) - bch2_fs_free(c); + bch2_fs_free(c); } static struct file_system_type bcache_fs_type = { -- cgit v1.2.3 From f42fa17883e73d8509fff5925781d4157db82f00 Mon Sep 17 00:00:00 2001 From: Kent Overstreet Date: Sun, 12 Nov 2023 15:47:02 -0500 Subject: bcachefs: Fix missing transaction commit In may_delete_deleted_inode(), there's a corner case when a snapshot was taken while we had an unlinked inode: we don't want to delete the inode in the internal (shared) snapshot node, since it might have been reattached in a descendent snapshot. Instead we propagate the key to any snapshot leaves it doesn't exist in, so that it can be deleted there if necessary, and then clear the unlinked flag in the internal node. But we forgot to commit after clearing the unlinked flag, causing us to go into an infinite loop. Signed-off-by: Kent Overstreet --- fs/bcachefs/inode.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/fs/bcachefs/inode.c b/fs/bcachefs/inode.c index dab12c14d1ad..c7849b0753e7 100644 --- a/fs/bcachefs/inode.c +++ b/fs/bcachefs/inode.c @@ -1169,8 +1169,10 @@ again: */ for_each_btree_key(trans, iter, BTREE_ID_deleted_inodes, POS_MIN, BTREE_ITER_PREFETCH|BTREE_ITER_ALL_SNAPSHOTS, k, ret) { - ret = lockrestart_do(trans, may_delete_deleted_inode(trans, &iter, k.k->p, - &need_another_pass)); + ret = commit_do(trans, NULL, NULL, + BTREE_INSERT_NOFAIL| + BTREE_INSERT_LAZY_RW, + may_delete_deleted_inode(trans, &iter, k.k->p, &need_another_pass)); if (ret < 0) break; -- cgit v1.2.3 From 497c57a303590ea69ace23506e182c489e85694d Mon Sep 17 00:00:00 2001 From: Kent Overstreet Date: Sun, 12 Nov 2023 17:02:08 -0500 Subject: bcachefs: Disable debug log statements The journal read path had some informational log statements preperatory for ZNS support - they're not of interest to users, so we can turn them off. Signed-off-by: Kent Overstreet --- fs/bcachefs/journal_io.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/fs/bcachefs/journal_io.c b/fs/bcachefs/journal_io.c index f4bc2cdbfdd7..786a09285509 100644 --- a/fs/bcachefs/journal_io.c +++ b/fs/bcachefs/journal_io.c @@ -1079,6 +1079,12 @@ found: if (ja->bucket_seq[ja->cur_idx] && ja->sectors_free == ca->mi.bucket_size) { +#if 0 + /* + * Debug code for ZNS support, where we (probably) want to be + * correlated where we stopped in the journal to the zone write + * points: + */ bch_err(c, "ja->sectors_free == ca->mi.bucket_size"); bch_err(c, "cur_idx %u/%u", ja->cur_idx, ja->nr); for (i = 0; i < 3; i++) { @@ -1086,6 +1092,7 @@ found: bch_err(c, "bucket_seq[%u] = %llu", idx, ja->bucket_seq[idx]); } +#endif ja->sectors_free = 0; } -- cgit v1.2.3 From 7125063fc6dfb77138b3a100527f3d8f9203ff2a Mon Sep 17 00:00:00 2001 From: Kent Overstreet Date: Thu, 2 Mar 2023 23:52:57 -0500 Subject: bcachefs: Don't decrease BTREE_ITER_MAX when LOCKDEP=y Running with fewer max btree paths doesn't work anymore when replication is enabled - as we've added e.g. the freespace and bucket gens btrees, we naturally end up needing more btree paths. This is an issue with lockdep, we end up taking more locks than lockdep will track (the MAX_LOCKD_DEPTH constant). But bcachefs as merged does not yet support lockdep anyways, so we can leave that for later. Signed-off-by: Kent Overstreet --- fs/bcachefs/btree_types.h | 4 ---- 1 file changed, 4 deletions(-) diff --git a/fs/bcachefs/btree_types.h b/fs/bcachefs/btree_types.h index 6fbd4ef3df6b..60453ba86c4b 100644 --- a/fs/bcachefs/btree_types.h +++ b/fs/bcachefs/btree_types.h @@ -363,11 +363,7 @@ struct btree_insert_entry { unsigned long ip_allocated; }; -#ifndef CONFIG_LOCKDEP #define BTREE_ITER_MAX 64 -#else -#define BTREE_ITER_MAX 32 -#endif struct btree_trans_commit_hook; typedef int (btree_trans_commit_hook_fn)(struct btree_trans *, struct btree_trans_commit_hook *); -- cgit v1.2.3 From db18ef1a02bc2cd924f86b2582302f2c2711b67c Mon Sep 17 00:00:00 2001 From: Kent Overstreet Date: Mon, 13 Nov 2023 21:17:19 -0500 Subject: bcachefs: Fix bch2_check_nlinks() for snapshots When searching the link table for the matching inode, we were searching for a specific - incorrect - snapshot ID as well, causing us to fail to find the inode. Signed-off-by: Kent Overstreet --- fs/bcachefs/fsck.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/bcachefs/fsck.c b/fs/bcachefs/fsck.c index 9f3e9bd3d767..e0c5cd119acc 100644 --- a/fs/bcachefs/fsck.c +++ b/fs/bcachefs/fsck.c @@ -2220,7 +2220,7 @@ static int nlink_cmp(const void *_l, const void *_r) const struct nlink *l = _l; const struct nlink *r = _r; - return cmp_int(l->inum, r->inum) ?: cmp_int(l->snapshot, r->snapshot); + return cmp_int(l->inum, r->inum); } static void inc_link(struct bch_fs *c, struct snapshots_seen *s, -- cgit v1.2.3 From 62d73dfc44d54c97e0df6b947f0bccf6c4b8030e Mon Sep 17 00:00:00 2001 From: Kent Overstreet Date: Sun, 12 Nov 2023 21:46:52 -0500 Subject: bcachefs: Fix no_data_io mode checksum check In no_data_io mode, we expect data checksums to be wrong - don't want to spew the log with them. Signed-off-by: Kent Overstreet --- fs/bcachefs/io_write.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/bcachefs/io_write.c b/fs/bcachefs/io_write.c index f02b3f7d26a0..d704a8f829c8 100644 --- a/fs/bcachefs/io_write.c +++ b/fs/bcachefs/io_write.c @@ -795,7 +795,7 @@ static int bch2_write_decrypt(struct bch_write_op *op) * checksum: */ csum = bch2_checksum_bio(c, op->crc.csum_type, nonce, &op->wbio.bio); - if (bch2_crc_cmp(op->crc.csum, csum)) + if (bch2_crc_cmp(op->crc.csum, csum) && !c->opts.no_data_io) return -EIO; ret = bch2_encrypt_bio(c, op->crc.csum_type, nonce, &op->wbio.bio); -- cgit v1.2.3 From 61b85cb0d773115d9a4b20c3e67286844cf73f34 Mon Sep 17 00:00:00 2001 From: Kent Overstreet Date: Tue, 14 Nov 2023 18:52:22 -0500 Subject: bcachefs: six locks: Fix lost wakeup In percpu reader mode, trylock() for read had a lost wakeup: on failure to get the lock, we may have caused a writer to fail to get the lock, because we temporarily elevated the reader count. We need to check for waiters after decrementing the read count - not before. Signed-off-by: Kent Overstreet --- fs/bcachefs/six.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/fs/bcachefs/six.c b/fs/bcachefs/six.c index b775cf0fb7cb..97790445e67a 100644 --- a/fs/bcachefs/six.c +++ b/fs/bcachefs/six.c @@ -163,8 +163,11 @@ static int __do_six_trylock(struct six_lock *lock, enum six_lock_type type, this_cpu_sub(*lock->readers, !ret); preempt_enable(); - if (!ret && (old & SIX_LOCK_WAITING_write)) - ret = -1 - SIX_LOCK_write; + if (!ret) { + smp_mb(); + if (atomic_read(&lock->state) & SIX_LOCK_WAITING_write) + ret = -1 - SIX_LOCK_write; + } } else if (type == SIX_LOCK_write && lock->readers) { if (try) { atomic_add(SIX_LOCK_HELD_write, &lock->state); -- cgit v1.2.3 From 5dd9ad32d7758b1a76742f394acf0eb3ac8a636a Mon Sep 17 00:00:00 2001 From: Juergen Gross Date: Wed, 27 Sep 2023 10:29:02 +0200 Subject: xen/events: drop xen_allocate_irqs_dynamic() Instead of having a common function for allocating a single IRQ or a consecutive number of IRQs, split up the functionality into the callers of xen_allocate_irqs_dynamic(). This allows to handle any allocation error in xen_irq_init() gracefully instead of panicing the system. Let xen_irq_init() return the irq_info pointer or NULL in case of an allocation error. Additionally set the IRQ into irq_info already at allocation time, as otherwise the IRQ would be '0' (which is a valid IRQ number) until being set. Signed-off-by: Juergen Gross Reviewed-by: Oleksandr Tyshchenko Signed-off-by: Juergen Gross --- drivers/xen/events/events_base.c | 74 ++++++++++++++++++++++++---------------- 1 file changed, 44 insertions(+), 30 deletions(-) diff --git a/drivers/xen/events/events_base.c b/drivers/xen/events/events_base.c index a810e8904fbf..75f8d1dcbbb7 100644 --- a/drivers/xen/events/events_base.c +++ b/drivers/xen/events/events_base.c @@ -304,6 +304,13 @@ static void channels_on_cpu_inc(struct irq_info *info) info->is_accounted = 1; } +static void xen_irq_free_desc(unsigned int irq) +{ + /* Legacy IRQ descriptors are managed by the arch. */ + if (irq >= nr_legacy_irqs()) + irq_free_desc(irq); +} + static void delayed_free_irq(struct work_struct *work) { struct irq_info *info = container_of(to_rcu_work(work), struct irq_info, @@ -315,9 +322,7 @@ static void delayed_free_irq(struct work_struct *work) kfree(info); - /* Legacy IRQ descriptors are managed by the arch. */ - if (irq >= nr_legacy_irqs()) - irq_free_desc(irq); + xen_irq_free_desc(irq); } /* Constructors for packed IRQ information. */ @@ -332,7 +337,6 @@ static int xen_irq_info_common_setup(struct irq_info *info, BUG_ON(info->type != IRQT_UNBOUND && info->type != type); info->type = type; - info->irq = irq; info->evtchn = evtchn; info->cpu = cpu; info->mask_reason = EVT_MASK_REASON_EXPLICIT; @@ -733,47 +737,45 @@ void xen_irq_lateeoi(unsigned int irq, unsigned int eoi_flags) } EXPORT_SYMBOL_GPL(xen_irq_lateeoi); -static void xen_irq_init(unsigned irq) +static struct irq_info *xen_irq_init(unsigned int irq) { struct irq_info *info; info = kzalloc(sizeof(*info), GFP_KERNEL); - if (info == NULL) - panic("Unable to allocate metadata for IRQ%d\n", irq); + if (info) { + info->irq = irq; + info->type = IRQT_UNBOUND; + info->refcnt = -1; + INIT_RCU_WORK(&info->rwork, delayed_free_irq); - info->type = IRQT_UNBOUND; - info->refcnt = -1; - INIT_RCU_WORK(&info->rwork, delayed_free_irq); + set_info_for_irq(irq, info); + /* + * Interrupt affinity setting can be immediate. No point + * in delaying it until an interrupt is handled. + */ + irq_set_status_flags(irq, IRQ_MOVE_PCNTXT); - set_info_for_irq(irq, info); - /* - * Interrupt affinity setting can be immediate. No point - * in delaying it until an interrupt is handled. - */ - irq_set_status_flags(irq, IRQ_MOVE_PCNTXT); + INIT_LIST_HEAD(&info->eoi_list); + list_add_tail(&info->list, &xen_irq_list_head); + } - INIT_LIST_HEAD(&info->eoi_list); - list_add_tail(&info->list, &xen_irq_list_head); + return info; } -static int __must_check xen_allocate_irqs_dynamic(int nvec) +static inline int __must_check xen_allocate_irq_dynamic(void) { - int i, irq = irq_alloc_descs(-1, 0, nvec, -1); + int irq = irq_alloc_desc_from(0, -1); if (irq >= 0) { - for (i = 0; i < nvec; i++) - xen_irq_init(irq + i); + if (!xen_irq_init(irq)) { + xen_irq_free_desc(irq); + irq = -1; + } } return irq; } -static inline int __must_check xen_allocate_irq_dynamic(void) -{ - - return xen_allocate_irqs_dynamic(1); -} - static int __must_check xen_allocate_irq_gsi(unsigned gsi) { int irq; @@ -793,7 +795,10 @@ static int __must_check xen_allocate_irq_gsi(unsigned gsi) else irq = irq_alloc_desc_at(gsi, -1); - xen_irq_init(irq); + if (!xen_irq_init(irq)) { + xen_irq_free_desc(irq); + irq = -1; + } return irq; } @@ -963,6 +968,11 @@ static void __unbind_from_irq(unsigned int irq) evtchn_port_t evtchn = evtchn_from_irq(irq); struct irq_info *info = info_for_irq(irq); + if (!info) { + xen_irq_free_desc(irq); + return; + } + if (info->refcnt > 0) { info->refcnt--; if (info->refcnt != 0) @@ -1101,11 +1111,14 @@ int xen_bind_pirq_msi_to_irq(struct pci_dev *dev, struct msi_desc *msidesc, mutex_lock(&irq_mapping_update_lock); - irq = xen_allocate_irqs_dynamic(nvec); + irq = irq_alloc_descs(-1, 0, nvec, -1); if (irq < 0) goto out; for (i = 0; i < nvec; i++) { + if (!xen_irq_init(irq + i)) + goto error_irq; + irq_set_chip_and_handler_name(irq + i, &xen_pirq_chip, handle_edge_irq, name); ret = xen_irq_info_pirq_setup(irq + i, 0, pirq + i, 0, domid, @@ -1730,6 +1743,7 @@ void rebind_evtchn_irq(evtchn_port_t evtchn, int irq) so there should be a proper type */ BUG_ON(info->type == IRQT_UNBOUND); + info->irq = irq; (void)xen_irq_info_evtchn_setup(irq, evtchn, NULL); mutex_unlock(&irq_mapping_update_lock); -- cgit v1.2.3 From 3fcdaf3d7634338c3f5cbfa7451eb0b6b0024844 Mon Sep 17 00:00:00 2001 From: Juergen Gross Date: Thu, 28 Sep 2023 09:09:52 +0200 Subject: xen/events: modify internal [un]bind interfaces Modify the internal bind- and unbind-interfaces to take a struct irq_info parameter. When allocating a new IRQ pass the pointer from the allocating function further up. This will reduce the number of info_for_irq() calls and make the code more efficient. Signed-off-by: Juergen Gross Reviewed-by: Oleksandr Tyshchenko Signed-off-by: Juergen Gross --- drivers/xen/events/events_base.c | 259 +++++++++++++++++++-------------------- 1 file changed, 124 insertions(+), 135 deletions(-) diff --git a/drivers/xen/events/events_base.c b/drivers/xen/events/events_base.c index 75f8d1dcbbb7..88f0c80d0f87 100644 --- a/drivers/xen/events/events_base.c +++ b/drivers/xen/events/events_base.c @@ -327,7 +327,6 @@ static void delayed_free_irq(struct work_struct *work) /* Constructors for packed IRQ information. */ static int xen_irq_info_common_setup(struct irq_info *info, - unsigned irq, enum xen_irq_type type, evtchn_port_t evtchn, unsigned short cpu) @@ -342,23 +341,22 @@ static int xen_irq_info_common_setup(struct irq_info *info, info->mask_reason = EVT_MASK_REASON_EXPLICIT; raw_spin_lock_init(&info->lock); - ret = set_evtchn_to_irq(evtchn, irq); + ret = set_evtchn_to_irq(evtchn, info->irq); if (ret < 0) return ret; - irq_clear_status_flags(irq, IRQ_NOREQUEST|IRQ_NOAUTOEN); + irq_clear_status_flags(info->irq, IRQ_NOREQUEST | IRQ_NOAUTOEN); return xen_evtchn_port_setup(evtchn); } -static int xen_irq_info_evtchn_setup(unsigned irq, +static int xen_irq_info_evtchn_setup(struct irq_info *info, evtchn_port_t evtchn, struct xenbus_device *dev) { - struct irq_info *info = info_for_irq(irq); int ret; - ret = xen_irq_info_common_setup(info, irq, IRQT_EVTCHN, evtchn, 0); + ret = xen_irq_info_common_setup(info, IRQT_EVTCHN, evtchn, 0); info->u.interdomain = dev; if (dev) atomic_inc(&dev->event_channels); @@ -366,50 +364,37 @@ static int xen_irq_info_evtchn_setup(unsigned irq, return ret; } -static int xen_irq_info_ipi_setup(unsigned cpu, - unsigned irq, - evtchn_port_t evtchn, - enum ipi_vector ipi) +static int xen_irq_info_ipi_setup(struct irq_info *info, unsigned int cpu, + evtchn_port_t evtchn, enum ipi_vector ipi) { - struct irq_info *info = info_for_irq(irq); - info->u.ipi = ipi; - per_cpu(ipi_to_irq, cpu)[ipi] = irq; + per_cpu(ipi_to_irq, cpu)[ipi] = info->irq; per_cpu(ipi_to_evtchn, cpu)[ipi] = evtchn; - return xen_irq_info_common_setup(info, irq, IRQT_IPI, evtchn, 0); + return xen_irq_info_common_setup(info, IRQT_IPI, evtchn, 0); } -static int xen_irq_info_virq_setup(unsigned cpu, - unsigned irq, - evtchn_port_t evtchn, - unsigned virq) +static int xen_irq_info_virq_setup(struct irq_info *info, unsigned int cpu, + evtchn_port_t evtchn, unsigned int virq) { - struct irq_info *info = info_for_irq(irq); - info->u.virq = virq; - per_cpu(virq_to_irq, cpu)[virq] = irq; + per_cpu(virq_to_irq, cpu)[virq] = info->irq; - return xen_irq_info_common_setup(info, irq, IRQT_VIRQ, evtchn, 0); + return xen_irq_info_common_setup(info, IRQT_VIRQ, evtchn, 0); } -static int xen_irq_info_pirq_setup(unsigned irq, - evtchn_port_t evtchn, - unsigned pirq, - unsigned gsi, - uint16_t domid, - unsigned char flags) +static int xen_irq_info_pirq_setup(struct irq_info *info, evtchn_port_t evtchn, + unsigned int pirq, unsigned int gsi, + uint16_t domid, unsigned char flags) { - struct irq_info *info = info_for_irq(irq); - info->u.pirq.pirq = pirq; info->u.pirq.gsi = gsi; info->u.pirq.domid = domid; info->u.pirq.flags = flags; - return xen_irq_info_common_setup(info, irq, IRQT_PIRQ, evtchn, 0); + return xen_irq_info_common_setup(info, IRQT_PIRQ, evtchn, 0); } static void xen_irq_info_cleanup(struct irq_info *info) @@ -453,20 +438,16 @@ int irq_evtchn_from_virq(unsigned int cpu, unsigned int virq, return irq; } -static enum ipi_vector ipi_from_irq(unsigned irq) +static enum ipi_vector ipi_from_irq(struct irq_info *info) { - struct irq_info *info = info_for_irq(irq); - BUG_ON(info == NULL); BUG_ON(info->type != IRQT_IPI); return info->u.ipi; } -static unsigned virq_from_irq(unsigned irq) +static unsigned int virq_from_irq(struct irq_info *info) { - struct irq_info *info = info_for_irq(irq); - BUG_ON(info == NULL); BUG_ON(info->type != IRQT_VIRQ); @@ -533,13 +514,9 @@ static bool pirq_needs_eoi_flag(unsigned irq) return info->u.pirq.flags & PIRQ_NEEDS_EOI; } -static void bind_evtchn_to_cpu(evtchn_port_t evtchn, unsigned int cpu, +static void bind_evtchn_to_cpu(struct irq_info *info, unsigned int cpu, bool force_affinity) { - struct irq_info *info = evtchn_to_info(evtchn); - - BUG_ON(info == NULL); - if (IS_ENABLED(CONFIG_SMP) && force_affinity) { struct irq_data *data = irq_get_irq_data(info->irq); @@ -547,7 +524,7 @@ static void bind_evtchn_to_cpu(evtchn_port_t evtchn, unsigned int cpu, irq_data_update_effective_affinity(data, cpumask_of(cpu)); } - xen_evtchn_port_bind_to_cpu(evtchn, cpu, info->cpu); + xen_evtchn_port_bind_to_cpu(info->evtchn, cpu, info->cpu); channels_on_cpu_dec(info); info->cpu = cpu; @@ -762,23 +739,24 @@ static struct irq_info *xen_irq_init(unsigned int irq) return info; } -static inline int __must_check xen_allocate_irq_dynamic(void) +static struct irq_info *xen_allocate_irq_dynamic(void) { int irq = irq_alloc_desc_from(0, -1); + struct irq_info *info = NULL; if (irq >= 0) { - if (!xen_irq_init(irq)) { + info = xen_irq_init(irq); + if (!info) xen_irq_free_desc(irq); - irq = -1; - } } - return irq; + return info; } -static int __must_check xen_allocate_irq_gsi(unsigned gsi) +static struct irq_info *xen_allocate_irq_gsi(unsigned int gsi) { int irq; + struct irq_info *info; /* * A PV guest has no concept of a GSI (since it has no ACPI @@ -795,18 +773,15 @@ static int __must_check xen_allocate_irq_gsi(unsigned gsi) else irq = irq_alloc_desc_at(gsi, -1); - if (!xen_irq_init(irq)) { + info = xen_irq_init(irq); + if (!info) xen_irq_free_desc(irq); - irq = -1; - } - return irq; + return info; } -static void xen_free_irq(unsigned irq) +static void xen_free_irq(struct irq_info *info) { - struct irq_info *info = info_for_irq(irq); - if (WARN_ON(!info)) return; @@ -897,7 +872,7 @@ static unsigned int __startup_pirq(unsigned int irq) goto err; info->evtchn = evtchn; - bind_evtchn_to_cpu(evtchn, 0, false); + bind_evtchn_to_cpu(info, 0, false); rc = xen_evtchn_port_setup(evtchn); if (rc) @@ -963,10 +938,9 @@ int xen_irq_from_gsi(unsigned gsi) } EXPORT_SYMBOL_GPL(xen_irq_from_gsi); -static void __unbind_from_irq(unsigned int irq) +static void __unbind_from_irq(struct irq_info *info, unsigned int irq) { - evtchn_port_t evtchn = evtchn_from_irq(irq); - struct irq_info *info = info_for_irq(irq); + evtchn_port_t evtchn; if (!info) { xen_irq_free_desc(irq); @@ -979,6 +953,8 @@ static void __unbind_from_irq(unsigned int irq) return; } + evtchn = info->evtchn; + if (VALID_EVTCHN(evtchn)) { unsigned int cpu = info->cpu; struct xenbus_device *dev; @@ -988,11 +964,11 @@ static void __unbind_from_irq(unsigned int irq) switch (info->type) { case IRQT_VIRQ: - per_cpu(virq_to_irq, cpu)[virq_from_irq(irq)] = -1; + per_cpu(virq_to_irq, cpu)[virq_from_irq(info)] = -1; break; case IRQT_IPI: - per_cpu(ipi_to_irq, cpu)[ipi_from_irq(irq)] = -1; - per_cpu(ipi_to_evtchn, cpu)[ipi_from_irq(irq)] = 0; + per_cpu(ipi_to_irq, cpu)[ipi_from_irq(info)] = -1; + per_cpu(ipi_to_evtchn, cpu)[ipi_from_irq(info)] = 0; break; case IRQT_EVTCHN: dev = info->u.interdomain; @@ -1006,7 +982,7 @@ static void __unbind_from_irq(unsigned int irq) xen_irq_info_cleanup(info); } - xen_free_irq(irq); + xen_free_irq(info); } /* @@ -1022,24 +998,24 @@ static void __unbind_from_irq(unsigned int irq) int xen_bind_pirq_gsi_to_irq(unsigned gsi, unsigned pirq, int shareable, char *name) { - int irq; + struct irq_info *info; struct physdev_irq irq_op; int ret; mutex_lock(&irq_mapping_update_lock); - irq = xen_irq_from_gsi(gsi); - if (irq != -1) { + ret = xen_irq_from_gsi(gsi); + if (ret != -1) { pr_info("%s: returning irq %d for gsi %u\n", - __func__, irq, gsi); + __func__, ret, gsi); goto out; } - irq = xen_allocate_irq_gsi(gsi); - if (irq < 0) + info = xen_allocate_irq_gsi(gsi); + if (!info) goto out; - irq_op.irq = irq; + irq_op.irq = info->irq; irq_op.vector = 0; /* Only the privileged domain can do this. For non-priv, the pcifront @@ -1047,20 +1023,19 @@ int xen_bind_pirq_gsi_to_irq(unsigned gsi, * this in the priv domain. */ if (xen_initial_domain() && HYPERVISOR_physdev_op(PHYSDEVOP_alloc_irq_vector, &irq_op)) { - xen_free_irq(irq); - irq = -ENOSPC; + xen_free_irq(info); + ret = -ENOSPC; goto out; } - ret = xen_irq_info_pirq_setup(irq, 0, pirq, gsi, DOMID_SELF, + ret = xen_irq_info_pirq_setup(info, 0, pirq, gsi, DOMID_SELF, shareable ? PIRQ_SHAREABLE : 0); if (ret < 0) { - __unbind_from_irq(irq); - irq = ret; + __unbind_from_irq(info, info->irq); goto out; } - pirq_query_unmask(irq); + pirq_query_unmask(info->irq); /* We try to use the handler with the appropriate semantic for the * type of interrupt: if the interrupt is an edge triggered * interrupt we use handle_edge_irq. @@ -1077,16 +1052,18 @@ int xen_bind_pirq_gsi_to_irq(unsigned gsi, * is the right choice either way. */ if (shareable) - irq_set_chip_and_handler_name(irq, &xen_pirq_chip, + irq_set_chip_and_handler_name(info->irq, &xen_pirq_chip, handle_fasteoi_irq, name); else - irq_set_chip_and_handler_name(irq, &xen_pirq_chip, + irq_set_chip_and_handler_name(info->irq, &xen_pirq_chip, handle_edge_irq, name); + ret = info->irq; + out: mutex_unlock(&irq_mapping_update_lock); - return irq; + return ret; } #ifdef CONFIG_PCI_MSI @@ -1108,6 +1085,7 @@ int xen_bind_pirq_msi_to_irq(struct pci_dev *dev, struct msi_desc *msidesc, int pirq, int nvec, const char *name, domid_t domid) { int i, irq, ret; + struct irq_info *info; mutex_lock(&irq_mapping_update_lock); @@ -1116,12 +1094,13 @@ int xen_bind_pirq_msi_to_irq(struct pci_dev *dev, struct msi_desc *msidesc, goto out; for (i = 0; i < nvec; i++) { - if (!xen_irq_init(irq + i)) + info = xen_irq_init(irq + i); + if (!info) goto error_irq; irq_set_chip_and_handler_name(irq + i, &xen_pirq_chip, handle_edge_irq, name); - ret = xen_irq_info_pirq_setup(irq + i, 0, pirq + i, 0, domid, + ret = xen_irq_info_pirq_setup(info, 0, pirq + i, 0, domid, i == 0 ? 0 : PIRQ_MSI_GROUP); if (ret < 0) goto error_irq; @@ -1133,9 +1112,12 @@ int xen_bind_pirq_msi_to_irq(struct pci_dev *dev, struct msi_desc *msidesc, out: mutex_unlock(&irq_mapping_update_lock); return irq; + error_irq: - while (nvec--) - __unbind_from_irq(irq + nvec); + while (nvec--) { + info = info_for_irq(irq + nvec); + __unbind_from_irq(info, irq + nvec); + } mutex_unlock(&irq_mapping_update_lock); return ret; } @@ -1171,7 +1153,7 @@ int xen_destroy_irq(int irq) } } - xen_free_irq(irq); + xen_free_irq(info); out: mutex_unlock(&irq_mapping_update_lock); @@ -1187,8 +1169,7 @@ EXPORT_SYMBOL_GPL(xen_pirq_from_irq); static int bind_evtchn_to_irq_chip(evtchn_port_t evtchn, struct irq_chip *chip, struct xenbus_device *dev) { - int irq; - int ret; + int ret = -ENOMEM; struct irq_info *info; if (evtchn >= xen_evtchn_max_channels()) @@ -1199,17 +1180,16 @@ static int bind_evtchn_to_irq_chip(evtchn_port_t evtchn, struct irq_chip *chip, info = evtchn_to_info(evtchn); if (!info) { - irq = xen_allocate_irq_dynamic(); - if (irq < 0) + info = xen_allocate_irq_dynamic(); + if (!info) goto out; - irq_set_chip_and_handler_name(irq, chip, + irq_set_chip_and_handler_name(info->irq, chip, handle_edge_irq, "event"); - ret = xen_irq_info_evtchn_setup(irq, evtchn, dev); + ret = xen_irq_info_evtchn_setup(info, evtchn, dev); if (ret < 0) { - __unbind_from_irq(irq); - irq = ret; + __unbind_from_irq(info, info->irq); goto out; } /* @@ -1219,17 +1199,17 @@ static int bind_evtchn_to_irq_chip(evtchn_port_t evtchn, struct irq_chip *chip, * affinity setting is not invoked on them so nothing would * bind the channel. */ - bind_evtchn_to_cpu(evtchn, 0, false); - } else { - if (!WARN_ON(info->type != IRQT_EVTCHN)) - info->refcnt++; - irq = info->irq; + bind_evtchn_to_cpu(info, 0, false); + } else if (!WARN_ON(info->type != IRQT_EVTCHN)) { + info->refcnt++; } + ret = info->irq; + out: mutex_unlock(&irq_mapping_update_lock); - return irq; + return ret; } int bind_evtchn_to_irq(evtchn_port_t evtchn) @@ -1248,18 +1228,19 @@ static int bind_ipi_to_irq(unsigned int ipi, unsigned int cpu) { struct evtchn_bind_ipi bind_ipi; evtchn_port_t evtchn; - int ret, irq; + struct irq_info *info; + int ret; mutex_lock(&irq_mapping_update_lock); - irq = per_cpu(ipi_to_irq, cpu)[ipi]; + ret = per_cpu(ipi_to_irq, cpu)[ipi]; - if (irq == -1) { - irq = xen_allocate_irq_dynamic(); - if (irq < 0) + if (ret == -1) { + info = xen_allocate_irq_dynamic(); + if (!info) goto out; - irq_set_chip_and_handler_name(irq, &xen_percpu_chip, + irq_set_chip_and_handler_name(info->irq, &xen_percpu_chip, handle_percpu_irq, "ipi"); bind_ipi.vcpu = xen_vcpu_nr(cpu); @@ -1268,25 +1249,25 @@ static int bind_ipi_to_irq(unsigned int ipi, unsigned int cpu) BUG(); evtchn = bind_ipi.port; - ret = xen_irq_info_ipi_setup(cpu, irq, evtchn, ipi); + ret = xen_irq_info_ipi_setup(info, cpu, evtchn, ipi); if (ret < 0) { - __unbind_from_irq(irq); - irq = ret; + __unbind_from_irq(info, info->irq); goto out; } /* * Force the affinity mask to the target CPU so proc shows * the correct target. */ - bind_evtchn_to_cpu(evtchn, cpu, true); + bind_evtchn_to_cpu(info, cpu, true); + ret = info->irq; } else { - struct irq_info *info = info_for_irq(irq); + info = info_for_irq(ret); WARN_ON(info == NULL || info->type != IRQT_IPI); } out: mutex_unlock(&irq_mapping_update_lock); - return irq; + return ret; } static int bind_interdomain_evtchn_to_irq_chip(struct xenbus_device *dev, @@ -1354,22 +1335,23 @@ int bind_virq_to_irq(unsigned int virq, unsigned int cpu, bool percpu) { struct evtchn_bind_virq bind_virq; evtchn_port_t evtchn = 0; - int irq, ret; + struct irq_info *info; + int ret; mutex_lock(&irq_mapping_update_lock); - irq = per_cpu(virq_to_irq, cpu)[virq]; + ret = per_cpu(virq_to_irq, cpu)[virq]; - if (irq == -1) { - irq = xen_allocate_irq_dynamic(); - if (irq < 0) + if (ret == -1) { + info = xen_allocate_irq_dynamic(); + if (!info) goto out; if (percpu) - irq_set_chip_and_handler_name(irq, &xen_percpu_chip, + irq_set_chip_and_handler_name(info->irq, &xen_percpu_chip, handle_percpu_irq, "virq"); else - irq_set_chip_and_handler_name(irq, &xen_dynamic_chip, + irq_set_chip_and_handler_name(info->irq, &xen_dynamic_chip, handle_edge_irq, "virq"); bind_virq.virq = virq; @@ -1384,10 +1366,9 @@ int bind_virq_to_irq(unsigned int virq, unsigned int cpu, bool percpu) BUG_ON(ret < 0); } - ret = xen_irq_info_virq_setup(cpu, irq, evtchn, virq); + ret = xen_irq_info_virq_setup(info, cpu, evtchn, virq); if (ret < 0) { - __unbind_from_irq(irq); - irq = ret; + __unbind_from_irq(info, info->irq); goto out; } @@ -1395,22 +1376,26 @@ int bind_virq_to_irq(unsigned int virq, unsigned int cpu, bool percpu) * Force the affinity mask for percpu interrupts so proc * shows the correct target. */ - bind_evtchn_to_cpu(evtchn, cpu, percpu); + bind_evtchn_to_cpu(info, cpu, percpu); + ret = info->irq; } else { - struct irq_info *info = info_for_irq(irq); + info = info_for_irq(ret); WARN_ON(info == NULL || info->type != IRQT_VIRQ); } out: mutex_unlock(&irq_mapping_update_lock); - return irq; + return ret; } static void unbind_from_irq(unsigned int irq) { + struct irq_info *info; + mutex_lock(&irq_mapping_update_lock); - __unbind_from_irq(irq); + info = info_for_irq(irq); + __unbind_from_irq(info, irq); mutex_unlock(&irq_mapping_update_lock); } @@ -1744,11 +1729,11 @@ void rebind_evtchn_irq(evtchn_port_t evtchn, int irq) BUG_ON(info->type == IRQT_UNBOUND); info->irq = irq; - (void)xen_irq_info_evtchn_setup(irq, evtchn, NULL); + (void)xen_irq_info_evtchn_setup(info, evtchn, NULL); mutex_unlock(&irq_mapping_update_lock); - bind_evtchn_to_cpu(evtchn, info->cpu, false); + bind_evtchn_to_cpu(info, info->cpu, false); /* Unmask the event channel. */ enable_irq(irq); @@ -1782,7 +1767,7 @@ static int xen_rebind_evtchn_to_cpu(struct irq_info *info, unsigned int tcpu) * it, but don't do the xenlinux-level rebind in that case. */ if (HYPERVISOR_event_channel_op(EVTCHNOP_bind_vcpu, &bind_vcpu) >= 0) - bind_evtchn_to_cpu(evtchn, tcpu, false); + bind_evtchn_to_cpu(info, tcpu, false); do_unmask(info, EVT_MASK_REASON_TEMPORARY); @@ -1933,7 +1918,7 @@ static void restore_pirqs(void) if (rc) { pr_warn("xen map irq failed gsi=%d irq=%d pirq=%d rc=%d\n", gsi, irq, pirq, rc); - xen_free_irq(irq); + xen_free_irq(info); continue; } @@ -1947,13 +1932,15 @@ static void restore_cpu_virqs(unsigned int cpu) { struct evtchn_bind_virq bind_virq; evtchn_port_t evtchn; + struct irq_info *info; int virq, irq; for (virq = 0; virq < NR_VIRQS; virq++) { if ((irq = per_cpu(virq_to_irq, cpu)[virq]) == -1) continue; + info = info_for_irq(irq); - BUG_ON(virq_from_irq(irq) != virq); + BUG_ON(virq_from_irq(info) != virq); /* Get a new binding from Xen. */ bind_virq.virq = virq; @@ -1964,9 +1951,9 @@ static void restore_cpu_virqs(unsigned int cpu) evtchn = bind_virq.port; /* Record the new mapping. */ - (void)xen_irq_info_virq_setup(cpu, irq, evtchn, virq); + xen_irq_info_virq_setup(info, cpu, evtchn, virq); /* The affinity mask is still valid */ - bind_evtchn_to_cpu(evtchn, cpu, false); + bind_evtchn_to_cpu(info, cpu, false); } } @@ -1974,13 +1961,15 @@ static void restore_cpu_ipis(unsigned int cpu) { struct evtchn_bind_ipi bind_ipi; evtchn_port_t evtchn; + struct irq_info *info; int ipi, irq; for (ipi = 0; ipi < XEN_NR_IPIS; ipi++) { if ((irq = per_cpu(ipi_to_irq, cpu)[ipi]) == -1) continue; + info = info_for_irq(irq); - BUG_ON(ipi_from_irq(irq) != ipi); + BUG_ON(ipi_from_irq(info) != ipi); /* Get a new binding from Xen. */ bind_ipi.vcpu = xen_vcpu_nr(cpu); @@ -1990,9 +1979,9 @@ static void restore_cpu_ipis(unsigned int cpu) evtchn = bind_ipi.port; /* Record the new mapping. */ - (void)xen_irq_info_ipi_setup(cpu, irq, evtchn, ipi); + xen_irq_info_ipi_setup(info, cpu, evtchn, ipi); /* The affinity mask is still valid */ - bind_evtchn_to_cpu(evtchn, cpu, false); + bind_evtchn_to_cpu(info, cpu, false); } } -- cgit v1.2.3 From cee96422e863f0b0e9d3d0c2d617271ef2255858 Mon Sep 17 00:00:00 2001 From: Juergen Gross Date: Thu, 28 Sep 2023 11:25:32 +0200 Subject: xen/events: remove some info_for_irq() calls in pirq handling Instead of the IRQ number user the struct irq_info pointer as parameter in the internal pirq related functions. This allows to drop some calls of info_for_irq(). Signed-off-by: Juergen Gross Reviewed-by: Oleksandr Tyshchenko Signed-off-by: Juergen Gross --- drivers/xen/events/events_base.c | 117 +++++++++++++++++++++++---------------- 1 file changed, 68 insertions(+), 49 deletions(-) diff --git a/drivers/xen/events/events_base.c b/drivers/xen/events/events_base.c index 88f0c80d0f87..f5edb9e27e3c 100644 --- a/drivers/xen/events/events_base.c +++ b/drivers/xen/events/events_base.c @@ -174,7 +174,7 @@ static int **evtchn_to_irq; #ifdef CONFIG_X86 static unsigned long *pirq_eoi_map; #endif -static bool (*pirq_needs_eoi)(unsigned irq); +static bool (*pirq_needs_eoi)(struct irq_info *info); #define EVTCHN_ROW(e) (e / (PAGE_SIZE/sizeof(**evtchn_to_irq))) #define EVTCHN_COL(e) (e % (PAGE_SIZE/sizeof(**evtchn_to_irq))) @@ -190,7 +190,6 @@ static struct irq_chip xen_lateeoi_chip; static struct irq_chip xen_percpu_chip; static struct irq_chip xen_pirq_chip; static void enable_dynirq(struct irq_data *data); -static void disable_dynirq(struct irq_data *data); static DEFINE_PER_CPU(unsigned int, irq_epoch); @@ -454,10 +453,8 @@ static unsigned int virq_from_irq(struct irq_info *info) return info->u.virq; } -static unsigned pirq_from_irq(unsigned irq) +static unsigned int pirq_from_irq(struct irq_info *info) { - struct irq_info *info = info_for_irq(irq); - BUG_ON(info == NULL); BUG_ON(info->type != IRQT_PIRQ); @@ -500,15 +497,14 @@ static void do_unmask(struct irq_info *info, u8 reason) } #ifdef CONFIG_X86 -static bool pirq_check_eoi_map(unsigned irq) +static bool pirq_check_eoi_map(struct irq_info *info) { - return test_bit(pirq_from_irq(irq), pirq_eoi_map); + return test_bit(pirq_from_irq(info), pirq_eoi_map); } #endif -static bool pirq_needs_eoi_flag(unsigned irq) +static bool pirq_needs_eoi_flag(struct irq_info *info) { - struct irq_info *info = info_for_irq(irq); BUG_ON(info->type != IRQT_PIRQ); return info->u.pirq.flags & PIRQ_NEEDS_EOI; @@ -802,14 +798,11 @@ static void event_handler_exit(struct irq_info *info) clear_evtchn(info->evtchn); } -static void pirq_query_unmask(int irq) +static void pirq_query_unmask(struct irq_info *info) { struct physdev_irq_status_query irq_status; - struct irq_info *info = info_for_irq(irq); - BUG_ON(info->type != IRQT_PIRQ); - - irq_status.irq = pirq_from_irq(irq); + irq_status.irq = pirq_from_irq(info); if (HYPERVISOR_physdev_op(PHYSDEVOP_irq_status_query, &irq_status)) irq_status.flags = 0; @@ -818,56 +811,76 @@ static void pirq_query_unmask(int irq) info->u.pirq.flags |= PIRQ_NEEDS_EOI; } -static void eoi_pirq(struct irq_data *data) +static void do_eoi_pirq(struct irq_info *info) { - struct irq_info *info = info_for_irq(data->irq); - evtchn_port_t evtchn = info ? info->evtchn : 0; - struct physdev_eoi eoi = { .irq = pirq_from_irq(data->irq) }; + struct physdev_eoi eoi = { .irq = pirq_from_irq(info) }; int rc = 0; - if (!VALID_EVTCHN(evtchn)) + if (!VALID_EVTCHN(info->evtchn)) return; event_handler_exit(info); - if (pirq_needs_eoi(data->irq)) { + if (pirq_needs_eoi(info)) { rc = HYPERVISOR_physdev_op(PHYSDEVOP_eoi, &eoi); WARN_ON(rc); } } +static void eoi_pirq(struct irq_data *data) +{ + struct irq_info *info = info_for_irq(data->irq); + + do_eoi_pirq(info); +} + +static void do_disable_dynirq(struct irq_info *info) +{ + if (VALID_EVTCHN(info->evtchn)) + do_mask(info, EVT_MASK_REASON_EXPLICIT); +} + +static void disable_dynirq(struct irq_data *data) +{ + struct irq_info *info = info_for_irq(data->irq); + + if (info) + do_disable_dynirq(info); +} + static void mask_ack_pirq(struct irq_data *data) { - disable_dynirq(data); - eoi_pirq(data); + struct irq_info *info = info_for_irq(data->irq); + + if (info) { + do_disable_dynirq(info); + do_eoi_pirq(info); + } } -static unsigned int __startup_pirq(unsigned int irq) +static unsigned int __startup_pirq(struct irq_info *info) { struct evtchn_bind_pirq bind_pirq; - struct irq_info *info = info_for_irq(irq); - evtchn_port_t evtchn = evtchn_from_irq(irq); + evtchn_port_t evtchn = info->evtchn; int rc; - BUG_ON(info->type != IRQT_PIRQ); - if (VALID_EVTCHN(evtchn)) goto out; - bind_pirq.pirq = pirq_from_irq(irq); + bind_pirq.pirq = pirq_from_irq(info); /* NB. We are happy to share unless we are probing. */ bind_pirq.flags = info->u.pirq.flags & PIRQ_SHAREABLE ? BIND_PIRQ__WILL_SHARE : 0; rc = HYPERVISOR_event_channel_op(EVTCHNOP_bind_pirq, &bind_pirq); if (rc != 0) { - pr_warn("Failed to obtain physical IRQ %d\n", irq); + pr_warn("Failed to obtain physical IRQ %d\n", info->irq); return 0; } evtchn = bind_pirq.port; - pirq_query_unmask(irq); + pirq_query_unmask(info); - rc = set_evtchn_to_irq(evtchn, irq); + rc = set_evtchn_to_irq(evtchn, info->irq); if (rc) goto err; @@ -881,26 +894,28 @@ static unsigned int __startup_pirq(unsigned int irq) out: do_unmask(info, EVT_MASK_REASON_EXPLICIT); - eoi_pirq(irq_get_irq_data(irq)); + do_eoi_pirq(info); return 0; err: - pr_err("irq%d: Failed to set port to irq mapping (%d)\n", irq, rc); + pr_err("irq%d: Failed to set port to irq mapping (%d)\n", info->irq, + rc); xen_evtchn_close(evtchn); return 0; } static unsigned int startup_pirq(struct irq_data *data) { - return __startup_pirq(data->irq); + struct irq_info *info = info_for_irq(data->irq); + + return __startup_pirq(info); } static void shutdown_pirq(struct irq_data *data) { - unsigned int irq = data->irq; - struct irq_info *info = info_for_irq(irq); - evtchn_port_t evtchn = evtchn_from_irq(irq); + struct irq_info *info = info_for_irq(data->irq); + evtchn_port_t evtchn = info->evtchn; BUG_ON(info->type != IRQT_PIRQ); @@ -1035,7 +1050,7 @@ int xen_bind_pirq_gsi_to_irq(unsigned gsi, goto out; } - pirq_query_unmask(info->irq); + pirq_query_unmask(info); /* We try to use the handler with the appropriate semantic for the * type of interrupt: if the interrupt is an edge triggered * interrupt we use handle_edge_irq. @@ -1162,7 +1177,9 @@ out: int xen_pirq_from_irq(unsigned irq) { - return pirq_from_irq(irq); + struct irq_info *info = info_for_irq(irq); + + return pirq_from_irq(info); } EXPORT_SYMBOL_GPL(xen_pirq_from_irq); @@ -1824,28 +1841,30 @@ static void enable_dynirq(struct irq_data *data) do_unmask(info, EVT_MASK_REASON_EXPLICIT); } -static void disable_dynirq(struct irq_data *data) +static void do_ack_dynirq(struct irq_info *info) { - struct irq_info *info = info_for_irq(data->irq); - evtchn_port_t evtchn = info ? info->evtchn : 0; + evtchn_port_t evtchn = info->evtchn; if (VALID_EVTCHN(evtchn)) - do_mask(info, EVT_MASK_REASON_EXPLICIT); + event_handler_exit(info); } static void ack_dynirq(struct irq_data *data) { struct irq_info *info = info_for_irq(data->irq); - evtchn_port_t evtchn = info ? info->evtchn : 0; - if (VALID_EVTCHN(evtchn)) - event_handler_exit(info); + if (info) + do_ack_dynirq(info); } static void mask_ack_dynirq(struct irq_data *data) { - disable_dynirq(data); - ack_dynirq(data); + struct irq_info *info = info_for_irq(data->irq); + + if (info) { + do_disable_dynirq(info); + do_ack_dynirq(info); + } } static void lateeoi_ack_dynirq(struct irq_data *data) @@ -1924,7 +1943,7 @@ static void restore_pirqs(void) printk(KERN_DEBUG "xen: --> irq=%d, pirq=%d\n", irq, map_irq.pirq); - __startup_pirq(irq); + __startup_pirq(info); } } -- cgit v1.2.3 From 9e2e7efbbbff69d8340abb56d375dd79d1f5770f Mon Sep 17 00:00:00 2001 From: Johnathan Mantey Date: Mon, 13 Nov 2023 08:30:29 -0800 Subject: Revert ncsi: Propagate carrier gain/loss events to the NCSI controller This reverts commit 3780bb29311eccb7a1c9641032a112eed237f7e3. The cited commit introduced unwanted behavior. The intent for the commit was to be able to detect carrier loss/gain for just the NIC connected to the BMC. The unwanted effect is a carrier loss for auxiliary paths also causes the BMC to lose carrier. The BMC never regains carrier despite the secondary NIC regaining a link. This change, when merged, needs to be backported to stable kernels. 5.4-stable, 5.10-stable, 5.15-stable, 6.1-stable, 6.5-stable Fixes: 3780bb29311e ("ncsi: Propagate carrier gain/loss events to the NCSI controller") CC: stable@vger.kernel.org Signed-off-by: Johnathan Mantey Reviewed-by: Simon Horman Signed-off-by: David S. Miller --- net/ncsi/ncsi-aen.c | 5 ----- 1 file changed, 5 deletions(-) diff --git a/net/ncsi/ncsi-aen.c b/net/ncsi/ncsi-aen.c index f8854bff286c..62fb1031763d 100644 --- a/net/ncsi/ncsi-aen.c +++ b/net/ncsi/ncsi-aen.c @@ -89,11 +89,6 @@ static int ncsi_aen_handler_lsc(struct ncsi_dev_priv *ndp, if ((had_link == has_link) || chained) return 0; - if (had_link) - netif_carrier_off(ndp->ndev.dev); - else - netif_carrier_on(ndp->ndev.dev); - if (!ndp->multi_package && !nc->package->multi_channel) { if (had_link) { ndp->flags |= NCSI_DEV_RESHUFFLE; -- cgit v1.2.3 From efc0c8363bc6dab2cd540acc886e6097deee8bb9 Mon Sep 17 00:00:00 2001 From: Niklas Söderlund Date: Mon, 13 Nov 2023 17:44:12 +0100 Subject: dt-bindings: net: ethernet-controller: Fix formatting error MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit When moving the *-internal-delay-ps properties to only apply for RGMII interface modes there where a typo in the text formatting. Signed-off-by: Niklas Söderlund Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller --- Documentation/devicetree/bindings/net/ethernet-controller.yaml | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/Documentation/devicetree/bindings/net/ethernet-controller.yaml b/Documentation/devicetree/bindings/net/ethernet-controller.yaml index 9f6a5ccbcefe..d14d123ad7a0 100644 --- a/Documentation/devicetree/bindings/net/ethernet-controller.yaml +++ b/Documentation/devicetree/bindings/net/ethernet-controller.yaml @@ -275,12 +275,12 @@ allOf: properties: rx-internal-delay-ps: description: - RGMII Receive Clock Delay defined in pico seconds.This is used for + RGMII Receive Clock Delay defined in pico seconds. This is used for controllers that have configurable RX internal delays. If this property is present then the MAC applies the RX delay. tx-internal-delay-ps: description: - RGMII Transmit Clock Delay defined in pico seconds.This is used for + RGMII Transmit Clock Delay defined in pico seconds. This is used for controllers that have configurable TX internal delays. If this property is present then the MAC applies the TX delay. -- cgit v1.2.3 From 00a614fc3527ba8846e6d823013bcf724e9a68f6 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Fri, 27 Oct 2023 17:26:23 +0200 Subject: accel/ivpu: avoid build failure with CONFIG_PM=n The usage count of struct dev_pm_info is an implementation detail that is only available if CONFIG_PM is enabled, so printing it in a debug message causes a build failure in configurations without PM: In file included from include/linux/device.h:15, from include/linux/pci.h:37, from drivers/accel/ivpu/ivpu_pm.c:8: drivers/accel/ivpu/ivpu_pm.c: In function 'ivpu_rpm_get_if_active': drivers/accel/ivpu/ivpu_pm.c:254:51: error: 'struct dev_pm_info' has no member named 'usage_count' 254 | atomic_read(&vdev->drm.dev->power.usage_count)); | ^ include/linux/dev_printk.h:129:48: note: in definition of macro 'dev_printk' 129 | _dev_printk(level, dev, fmt, ##__VA_ARGS__); \ | ^~~~~~~~~~~ drivers/accel/ivpu/ivpu_drv.h:75:17: note: in expansion of macro 'dev_dbg' 75 | dev_dbg((vdev)->drm.dev, "[%s] " fmt, #type, ##args); \ | ^~~~~~~ drivers/accel/ivpu/ivpu_pm.c:253:9: note: in expansion of macro 'ivpu_dbg' 253 | ivpu_dbg(vdev, RPM, "rpm_get_if_active count %d\n", | ^~~~~~~~ The print message does not seem essential, so the easiest workaround is to just remove it. Fixes: c39dc15191c4 ("accel/ivpu: Read clock rate only if device is up") Signed-off-by: Arnd Bergmann Reviewed-by: Stanislaw Gruszka Signed-off-by: Stanislaw Gruszka Link: https://patchwork.freedesktop.org/patch/msgid/20231027152633.528490-1-arnd@kernel.org (cherry picked from commit 1470acbef122c7e2e588f6346ce459c26d0568a2) Signed-off-by: Jacek Lawrynowicz --- drivers/accel/ivpu/ivpu_pm.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/drivers/accel/ivpu/ivpu_pm.c b/drivers/accel/ivpu/ivpu_pm.c index 0ace218783c8..e9b16cbc26f4 100644 --- a/drivers/accel/ivpu/ivpu_pm.c +++ b/drivers/accel/ivpu/ivpu_pm.c @@ -250,9 +250,6 @@ int ivpu_rpm_get_if_active(struct ivpu_device *vdev) { int ret; - ivpu_dbg(vdev, RPM, "rpm_get_if_active count %d\n", - atomic_read(&vdev->drm.dev->power.usage_count)); - ret = pm_runtime_get_if_active(vdev->drm.dev, false); drm_WARN_ON(&vdev->drm, ret < 0); -- cgit v1.2.3 From 4198a9b571065978632276264e01d71d68000ac5 Mon Sep 17 00:00:00 2001 From: Maria Yu Date: Wed, 15 Nov 2023 18:28:24 +0800 Subject: pinctrl: avoid reload of p state in list iteration When in the list_for_each_entry iteration, reload of p->state->settings with a local setting from old_state will turn the list iteration into an infinite loop. The typical symptom when the issue happens, will be a printk message like: "not freeing pin xx (xxx) as part of deactivating group xxx - it is already used for some other setting". This is a compiler-dependent problem, one instance occurred using Clang version 10.0 on the arm64 architecture with linux version 4.19. Fixes: 6e5e959dde0d ("pinctrl: API changes to support multiple states per device") Signed-off-by: Maria Yu Cc: Link: https://lore.kernel.org/r/20231115102824.23727-1-quic_aiquny@quicinc.com Signed-off-by: Linus Walleij --- drivers/pinctrl/core.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/pinctrl/core.c b/drivers/pinctrl/core.c index 1fa89be29b8f..f2977eb65522 100644 --- a/drivers/pinctrl/core.c +++ b/drivers/pinctrl/core.c @@ -1262,17 +1262,17 @@ static void pinctrl_link_add(struct pinctrl_dev *pctldev, static int pinctrl_commit_state(struct pinctrl *p, struct pinctrl_state *state) { struct pinctrl_setting *setting, *setting2; - struct pinctrl_state *old_state = p->state; + struct pinctrl_state *old_state = READ_ONCE(p->state); int ret; - if (p->state) { + if (old_state) { /* * For each pinmux setting in the old state, forget SW's record * of mux owner for that pingroup. Any pingroups which are * still owned by the new state will be re-acquired by the call * to pinmux_enable_setting() in the loop below. */ - list_for_each_entry(setting, &p->state->settings, node) { + list_for_each_entry(setting, &old_state->settings, node) { if (setting->type != PIN_MAP_TYPE_MUX_GROUP) continue; pinmux_disable_setting(setting); -- cgit v1.2.3 From 674e318089468ece99aef4796eaef7add57f36b2 Mon Sep 17 00:00:00 2001 From: Gal Pressman Date: Tue, 14 Nov 2023 09:56:18 +0200 Subject: net: Fix undefined behavior in netdev name allocation Cited commit removed the strscpy() call and kept the snprintf() only. It is common to use 'dev->name' as the format string before a netdev is registered, this results in 'res' and 'name' pointers being equal. According to POSIX, if copying takes place between objects that overlap as a result of a call to sprintf() or snprintf(), the results are undefined. Add back the strscpy() and use 'buf' as an intermediate buffer. Fixes: 7ad17b04dc7b ("net: trust the bitmap in __dev_alloc_name()") Cc: Jakub Kicinski Reviewed-by: Vlad Buslov Signed-off-by: Gal Pressman Reviewed-by: Jakub Kicinski Reviewed-by: Simon Horman Reviewed-by: Jiri Pirko Signed-off-by: David S. Miller --- net/core/dev.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/net/core/dev.c b/net/core/dev.c index 0d548431f3fa..af53f6d838ce 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -1119,7 +1119,9 @@ static int __dev_alloc_name(struct net *net, const char *name, char *res) if (i == max_netdevices) return -ENFILE; - snprintf(res, IFNAMSIZ, name, i); + /* 'res' and 'name' could overlap, use 'buf' as an intermediate buffer */ + strscpy(buf, name, IFNAMSIZ); + snprintf(res, IFNAMSIZ, buf, i); return i; } -- cgit v1.2.3 From 9fadd4509966e375952f31ae954ab5eae76f90fe Mon Sep 17 00:00:00 2001 From: Jithu Joseph Date: Thu, 2 Nov 2023 12:52:18 -0700 Subject: MAINTAINERS: Remove stale entry for SBL platform driver MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Maurice is no longer with Intel and his e-mail address is no longer active. Remove the stale entry from Slim boot loader section. Signed-off-by: Jithu Joseph Link: https://lore.kernel.org/r/20231102195218.143440-1-jithu.joseph@intel.com Signed-off-by: Ilpo Järvinen --- MAINTAINERS | 1 - 1 file changed, 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index 97f51d5ec1cf..0666ddb65552 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -11025,7 +11025,6 @@ F: drivers/net/wireless/intel/iwlwifi/ INTEL WMI SLIM BOOTLOADER (SBL) FIRMWARE UPDATE DRIVER M: Jithu Joseph -R: Maurice Ma S: Maintained W: https://slimbootloader.github.io/security/firmware-update.html F: drivers/platform/x86/intel/wmi/sbl-fw-update.c -- cgit v1.2.3 From 7a3c36eef9a5d13b16aa954da54224c9c6bed339 Mon Sep 17 00:00:00 2001 From: Stuart Hayhurst Date: Tue, 14 Nov 2023 11:38:08 +0000 Subject: platform/x86: ideapad-laptop: Set max_brightness before using it MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit max_brightness is used in ideapad_kbd_bl_brightness_get() before it's set, causing ideapad_kbd_bl_brightness_get() to return -EINVAL sometimes. Fixes: ecaa1867b524 ("platform/x86: ideapad-laptop: Add support for keyboard backlights using KBLC ACPI symbol") Signed-off-by: Stuart Hayhurst Cc: stable@vger.kernel.org Reviewed-by: Ilpo Järvinen Link: https://lore.kernel.org/r/20231114114055.6220-2-stuart.a.hayhurst@gmail.com Signed-off-by: Ilpo Järvinen --- drivers/platform/x86/ideapad-laptop.c | 11 +++++------ 1 file changed, 5 insertions(+), 6 deletions(-) diff --git a/drivers/platform/x86/ideapad-laptop.c b/drivers/platform/x86/ideapad-laptop.c index ac037540acfc..88eefccb6ed2 100644 --- a/drivers/platform/x86/ideapad-laptop.c +++ b/drivers/platform/x86/ideapad-laptop.c @@ -1425,18 +1425,17 @@ static int ideapad_kbd_bl_init(struct ideapad_private *priv) if (WARN_ON(priv->kbd_bl.initialized)) return -EEXIST; - brightness = ideapad_kbd_bl_brightness_get(priv); - if (brightness < 0) - return brightness; - - priv->kbd_bl.last_brightness = brightness; - if (ideapad_kbd_bl_check_tristate(priv->kbd_bl.type)) { priv->kbd_bl.led.max_brightness = 2; } else { priv->kbd_bl.led.max_brightness = 1; } + brightness = ideapad_kbd_bl_brightness_get(priv); + if (brightness < 0) + return brightness; + + priv->kbd_bl.last_brightness = brightness; priv->kbd_bl.led.name = "platform::" LED_FUNCTION_KBD_BACKLIGHT; priv->kbd_bl.led.brightness_get = ideapad_kbd_bl_led_cdev_brightness_get; priv->kbd_bl.led.brightness_set_blocking = ideapad_kbd_bl_led_cdev_brightness_set; -- cgit v1.2.3 From c5dbf04160005e07e8ca7232a7faa77ab1547ae0 Mon Sep 17 00:00:00 2001 From: Harshit Mogalapalli Date: Mon, 13 Nov 2023 12:07:37 -0800 Subject: platform/x86: hp-bioscfg: Simplify return check in hp_add_other_attributes() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit All cases in switch-case have a same goto on error, move the return check out of the switch. This is a cleanup. Signed-off-by: Harshit Mogalapalli Reviewed-by: Ilpo Järvinen Link: https://lore.kernel.org/r/20231113200742.3593548-1-harshit.m.mogalapalli@oracle.com Signed-off-by: Ilpo Järvinen --- drivers/platform/x86/hp/hp-bioscfg/bioscfg.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) diff --git a/drivers/platform/x86/hp/hp-bioscfg/bioscfg.c b/drivers/platform/x86/hp/hp-bioscfg/bioscfg.c index 5798b49ddaba..10676e1abc28 100644 --- a/drivers/platform/x86/hp/hp-bioscfg/bioscfg.c +++ b/drivers/platform/x86/hp/hp-bioscfg/bioscfg.c @@ -630,21 +630,19 @@ static int hp_add_other_attributes(int attr_type) switch (attr_type) { case HPWMI_SECURE_PLATFORM_TYPE: ret = hp_populate_secure_platform_data(attr_name_kobj); - if (ret) - goto err_other_attr_init; break; case HPWMI_SURE_START_TYPE: ret = hp_populate_sure_start_data(attr_name_kobj); - if (ret) - goto err_other_attr_init; break; default: ret = -EINVAL; - goto err_other_attr_init; } + if (ret) + goto err_other_attr_init; + mutex_unlock(&bioscfg_drv.mutex); return 0; -- cgit v1.2.3 From 5736aa9537c9b8927dec32d3d47c8c31fe560f62 Mon Sep 17 00:00:00 2001 From: Harshit Mogalapalli Date: Mon, 13 Nov 2023 12:07:38 -0800 Subject: platform/x86: hp-bioscfg: move mutex_lock() down in hp_add_other_attributes() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit attr_name_kobj's memory allocation is done with mutex_lock() held, this is not needed. Move allocation outside of mutex_lock() so unlock is not needed when allocation fails. Suggested-by: Ilpo Järvinen Signed-off-by: Harshit Mogalapalli Reviewed-by: Ilpo Järvinen Link: https://lore.kernel.org/r/20231113200742.3593548-2-harshit.m.mogalapalli@oracle.com Signed-off-by: Ilpo Järvinen --- drivers/platform/x86/hp/hp-bioscfg/bioscfg.c | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-) diff --git a/drivers/platform/x86/hp/hp-bioscfg/bioscfg.c b/drivers/platform/x86/hp/hp-bioscfg/bioscfg.c index 10676e1abc28..a3599498c4e8 100644 --- a/drivers/platform/x86/hp/hp-bioscfg/bioscfg.c +++ b/drivers/platform/x86/hp/hp-bioscfg/bioscfg.c @@ -592,13 +592,11 @@ static int hp_add_other_attributes(int attr_type) int ret; char *attr_name; - mutex_lock(&bioscfg_drv.mutex); - attr_name_kobj = kzalloc(sizeof(*attr_name_kobj), GFP_KERNEL); - if (!attr_name_kobj) { - ret = -ENOMEM; - goto err_other_attr_init; - } + if (!attr_name_kobj) + return -ENOMEM; + + mutex_lock(&bioscfg_drv.mutex); /* Check if attribute type is supported */ switch (attr_type) { -- cgit v1.2.3 From 9e88b493157a9901fa498f23cc3c9ab82b43ce83 Mon Sep 17 00:00:00 2001 From: Maarten Lankhorst Date: Wed, 15 Nov 2023 13:36:25 +0100 Subject: ALSA: hda: i915: Alays handle -EPROBE_DEFER MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit It turns out that even if the comment says that the driver can load fine, it's not really the case and no codecs are detected. Specifically for -EPROBE_DEFER, always fail the probe. This fixes a regression when HDA-intel is loaded before i915. Reported-by: Ville Syrjälä Closes: https://lore.kernel.org/r/ZVNUxZzCGcxQzqJX@intel.com Signed-off-by: Maarten Lankhorst Tested-by: Kai Vehmanen Fixes: e6d0c13e9f46 ("ALSA: hda: i915: Remove extra argument from snd_hdac_i915_init") Link: https://gitlab.freedesktop.org/drm/intel/-/issues/9671 Link: https://lore.kernel.org/r/20231115123625.74286-1-maarten.lankhorst@linux.intel.com Signed-off-by: Takashi Iwai --- sound/pci/hda/hda_intel.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c index e871afeeb383..e79508002bb1 100644 --- a/sound/pci/hda/hda_intel.c +++ b/sound/pci/hda/hda_intel.c @@ -2141,6 +2141,9 @@ static int azx_probe(struct pci_dev *pci, if (chip->driver_caps & AZX_DCAPS_I915_COMPONENT) { err = snd_hdac_i915_init(azx_bus(chip)); if (err < 0) { + if (err == -EPROBE_DEFER) + goto out_free; + /* if the controller is bound only with HDMI/DP * (for HSW and BDW), we need to abort the probe; * for other chips, still continue probing as other -- cgit v1.2.3 From f40f939917b2b4cbf18450096c0ce1c58ed59fae Mon Sep 17 00:00:00 2001 From: Harshit Mogalapalli Date: Mon, 13 Nov 2023 12:07:39 -0800 Subject: platform/x86: hp-bioscfg: Fix error handling in hp_add_other_attributes() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit 'attr_name_kobj' is allocated using kzalloc, but on all the error paths it is not freed, hence we have a memory leak. Fix the error path before kobject_init_and_add() by adding kfree(). kobject_put() must be always called after passing the object to kobject_init_and_add(). Only the error path which is immediately next to kobject_init_and_add() calls kobject_put() and not any other error path after it. Fix the error handling after kobject_init_and_add() by moving the kobject_put() into the goto label err_other_attr_init that is already used by all the error paths after kobject_init_and_add(). Fixes: a34fc329b189 ("platform/x86: hp-bioscfg: bioscfg") Cc: stable@vger.kernel.org # 6.6.x: c5dbf0416000: platform/x86: hp-bioscfg: Simplify return check in hp_add_other_attributes() Cc: stable@vger.kernel.org # 6.6.x: 5736aa9537c9: platform/x86: hp-bioscfg: move mutex_lock() down in hp_add_other_attributes() Reported-by: kernel test robot Reported-by: Dan Carpenter Closes: https://lore.kernel.org/r/202309201412.on0VXJGo-lkp@intel.com/ Signed-off-by: Harshit Mogalapalli [ij: Added the stable dep tags] Reviewed-by: Ilpo Järvinen Link: https://lore.kernel.org/r/20231113200742.3593548-3-harshit.m.mogalapalli@oracle.com Signed-off-by: Ilpo Järvinen --- drivers/platform/x86/hp/hp-bioscfg/bioscfg.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/platform/x86/hp/hp-bioscfg/bioscfg.c b/drivers/platform/x86/hp/hp-bioscfg/bioscfg.c index a3599498c4e8..6ddca857cc4d 100644 --- a/drivers/platform/x86/hp/hp-bioscfg/bioscfg.c +++ b/drivers/platform/x86/hp/hp-bioscfg/bioscfg.c @@ -613,14 +613,14 @@ static int hp_add_other_attributes(int attr_type) default: pr_err("Error: Unknown attr_type: %d\n", attr_type); ret = -EINVAL; - goto err_other_attr_init; + kfree(attr_name_kobj); + goto unlock_drv_mutex; } ret = kobject_init_and_add(attr_name_kobj, &attr_name_ktype, NULL, "%s", attr_name); if (ret) { pr_err("Error encountered [%d]\n", ret); - kobject_put(attr_name_kobj); goto err_other_attr_init; } @@ -645,6 +645,8 @@ static int hp_add_other_attributes(int attr_type) return 0; err_other_attr_init: + kobject_put(attr_name_kobj); +unlock_drv_mutex: mutex_unlock(&bioscfg_drv.mutex); kfree(obj); return ret; -- cgit v1.2.3 From 92c47597db7d8fb500a4b04ebd457ec7360279cc Mon Sep 17 00:00:00 2001 From: Harshit Mogalapalli Date: Mon, 13 Nov 2023 12:07:40 -0800 Subject: platform/x86: hp-bioscfg: Remove unused obj in hp_add_other_attributes() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit acpi_object *obj is unused in this function, so delete it, also delete a unnecessary kfree(obj); Signed-off-by: Harshit Mogalapalli Reviewed-by: Ilpo Järvinen Link: https://lore.kernel.org/r/20231113200742.3593548-4-harshit.m.mogalapalli@oracle.com Signed-off-by: Ilpo Järvinen --- drivers/platform/x86/hp/hp-bioscfg/bioscfg.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/platform/x86/hp/hp-bioscfg/bioscfg.c b/drivers/platform/x86/hp/hp-bioscfg/bioscfg.c index 6ddca857cc4d..8c9f4f3227fc 100644 --- a/drivers/platform/x86/hp/hp-bioscfg/bioscfg.c +++ b/drivers/platform/x86/hp/hp-bioscfg/bioscfg.c @@ -588,7 +588,6 @@ static void release_attributes_data(void) static int hp_add_other_attributes(int attr_type) { struct kobject *attr_name_kobj; - union acpi_object *obj = NULL; int ret; char *attr_name; @@ -648,7 +647,6 @@ err_other_attr_init: kobject_put(attr_name_kobj); unlock_drv_mutex: mutex_unlock(&bioscfg_drv.mutex); - kfree(obj); return ret; } -- cgit v1.2.3 From a0d45c3f596be53c1bd8822a1984532d14fdcea9 Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Tue, 14 Nov 2023 09:55:50 -0700 Subject: io_uring/fdinfo: remove need for sqpoll lock for thread/pid retrieval A previous commit added a trylock for getting the SQPOLL thread info via fdinfo, but this introduced a regression where we often fail to get it if the thread is busy. For that case, we end up not printing the current CPU and PID info. Rather than rely on this lock, just print the pid we already stored in the io_sq_data struct, and ensure we update the current CPU every time we've slept or potentially rescheduled. The latter won't potentially be 100% accurate, but that wasn't the case before either as the task can get migrated at any time unless it has been pinned at creation time. We retain keeping the io_sq_data dereference inside the ctx->uring_lock, as it has always been, as destruction of the thread and data happen below that. We could make this RCU safe, but there's little point in doing that. With this, we always print the last valid information we had, rather than have spurious outputs with missing information. Fixes: 7644b1a1c9a7 ("io_uring/fdinfo: lock SQ thread while retrieving thread cpu/pid") Signed-off-by: Jens Axboe --- io_uring/fdinfo.c | 9 ++------- io_uring/sqpoll.c | 12 ++++++++++-- 2 files changed, 12 insertions(+), 9 deletions(-) diff --git a/io_uring/fdinfo.c b/io_uring/fdinfo.c index f04a43044d91..976e9500f651 100644 --- a/io_uring/fdinfo.c +++ b/io_uring/fdinfo.c @@ -145,13 +145,8 @@ __cold void io_uring_show_fdinfo(struct seq_file *m, struct file *f) if (has_lock && (ctx->flags & IORING_SETUP_SQPOLL)) { struct io_sq_data *sq = ctx->sq_data; - if (mutex_trylock(&sq->lock)) { - if (sq->thread) { - sq_pid = task_pid_nr(sq->thread); - sq_cpu = task_cpu(sq->thread); - } - mutex_unlock(&sq->lock); - } + sq_pid = sq->task_pid; + sq_cpu = sq->sq_cpu; } seq_printf(m, "SqThread:\t%d\n", sq_pid); diff --git a/io_uring/sqpoll.c b/io_uring/sqpoll.c index bd6c2c7959a5..65b5dbe3c850 100644 --- a/io_uring/sqpoll.c +++ b/io_uring/sqpoll.c @@ -214,6 +214,7 @@ static bool io_sqd_handle_event(struct io_sq_data *sqd) did_sig = get_signal(&ksig); cond_resched(); mutex_lock(&sqd->lock); + sqd->sq_cpu = raw_smp_processor_id(); } return did_sig || test_bit(IO_SQ_THREAD_SHOULD_STOP, &sqd->state); } @@ -229,10 +230,15 @@ static int io_sq_thread(void *data) snprintf(buf, sizeof(buf), "iou-sqp-%d", sqd->task_pid); set_task_comm(current, buf); - if (sqd->sq_cpu != -1) + /* reset to our pid after we've set task_comm, for fdinfo */ + sqd->task_pid = current->pid; + + if (sqd->sq_cpu != -1) { set_cpus_allowed_ptr(current, cpumask_of(sqd->sq_cpu)); - else + } else { set_cpus_allowed_ptr(current, cpu_online_mask); + sqd->sq_cpu = raw_smp_processor_id(); + } mutex_lock(&sqd->lock); while (1) { @@ -261,6 +267,7 @@ static int io_sq_thread(void *data) mutex_unlock(&sqd->lock); cond_resched(); mutex_lock(&sqd->lock); + sqd->sq_cpu = raw_smp_processor_id(); } continue; } @@ -294,6 +301,7 @@ static int io_sq_thread(void *data) mutex_unlock(&sqd->lock); schedule(); mutex_lock(&sqd->lock); + sqd->sq_cpu = raw_smp_processor_id(); } list_for_each_entry(ctx, &sqd->ctx_list, sqd_list) atomic_andnot(IORING_SQ_NEED_WAKEUP, -- cgit v1.2.3 From ba12ab66aa83a2340a51ad6e74b284269745138c Mon Sep 17 00:00:00 2001 From: Mustafa Ismail Date: Tue, 14 Nov 2023 11:02:45 -0600 Subject: RDMA/irdma: Do not modify to SQD on error Remove the modify to SQD before going to ERROR state. It is not needed. Fixes: b48c24c2d710 ("RDMA/irdma: Implement device supported verb APIs") Signed-off-by: Mustafa Ismail Signed-off-by: Shiraz Saleem Link: https://lore.kernel.org/r/20231114170246.238-2-shiraz.saleem@intel.com Signed-off-by: Leon Romanovsky --- drivers/infiniband/hw/irdma/verbs.c | 7 ------- 1 file changed, 7 deletions(-) diff --git a/drivers/infiniband/hw/irdma/verbs.c b/drivers/infiniband/hw/irdma/verbs.c index 2138f0a2ff85..36e69e6ca9f8 100644 --- a/drivers/infiniband/hw/irdma/verbs.c +++ b/drivers/infiniband/hw/irdma/verbs.c @@ -1424,13 +1424,6 @@ int irdma_modify_qp_roce(struct ib_qp *ibqp, struct ib_qp_attr *attr, case IB_QPS_SQE: case IB_QPS_ERR: case IB_QPS_RESET: - if (iwqp->iwarp_state == IRDMA_QP_STATE_RTS) { - spin_unlock_irqrestore(&iwqp->lock, flags); - info.next_iwarp_state = IRDMA_QP_STATE_SQD; - irdma_hw_modify_qp(iwdev, iwqp, &info, true); - spin_lock_irqsave(&iwqp->lock, flags); - } - if (iwqp->iwarp_state == IRDMA_QP_STATE_ERROR) { spin_unlock_irqrestore(&iwqp->lock, flags); if (udata && udata->inlen) { -- cgit v1.2.3 From bd6da690c27d75cae432c09162d054b34fa2156f Mon Sep 17 00:00:00 2001 From: Mustafa Ismail Date: Tue, 14 Nov 2023 11:02:46 -0600 Subject: RDMA/irdma: Add wait for suspend on SQD Currently, there is no wait for the QP suspend to complete on a modify to SQD state. Add a wait, after the modify to SQD state, for the Suspend Complete AE. While we are at it, update the suspend timeout value in irdma_prep_tc_change to use IRDMA_EVENT_TIMEOUT_MS too. Fixes: b48c24c2d710 ("RDMA/irdma: Implement device supported verb APIs") Signed-off-by: Mustafa Ismail Signed-off-by: Shiraz Saleem Link: https://lore.kernel.org/r/20231114170246.238-3-shiraz.saleem@intel.com Signed-off-by: Leon Romanovsky --- drivers/infiniband/hw/irdma/hw.c | 6 +++++- drivers/infiniband/hw/irdma/main.c | 2 +- drivers/infiniband/hw/irdma/main.h | 2 +- drivers/infiniband/hw/irdma/verbs.c | 21 +++++++++++++++++++++ drivers/infiniband/hw/irdma/verbs.h | 1 + 5 files changed, 29 insertions(+), 3 deletions(-) diff --git a/drivers/infiniband/hw/irdma/hw.c b/drivers/infiniband/hw/irdma/hw.c index 8fa7e4a18e73..74f6bc7b7ad1 100644 --- a/drivers/infiniband/hw/irdma/hw.c +++ b/drivers/infiniband/hw/irdma/hw.c @@ -321,7 +321,11 @@ static void irdma_process_aeq(struct irdma_pci_f *rf) break; case IRDMA_AE_QP_SUSPEND_COMPLETE: if (iwqp->iwdev->vsi.tc_change_pending) { - atomic_dec(&iwqp->sc_qp.vsi->qp_suspend_reqs); + if (!atomic_dec_return(&qp->vsi->qp_suspend_reqs)) + wake_up(&iwqp->iwdev->suspend_wq); + } + if (iwqp->suspend_pending) { + iwqp->suspend_pending = false; wake_up(&iwqp->iwdev->suspend_wq); } break; diff --git a/drivers/infiniband/hw/irdma/main.c b/drivers/infiniband/hw/irdma/main.c index 9ac48b4dab41..3f13200ff71b 100644 --- a/drivers/infiniband/hw/irdma/main.c +++ b/drivers/infiniband/hw/irdma/main.c @@ -48,7 +48,7 @@ static void irdma_prep_tc_change(struct irdma_device *iwdev) /* Wait for all qp's to suspend */ wait_event_timeout(iwdev->suspend_wq, !atomic_read(&iwdev->vsi.qp_suspend_reqs), - IRDMA_EVENT_TIMEOUT); + msecs_to_jiffies(IRDMA_EVENT_TIMEOUT_MS)); irdma_ws_reset(&iwdev->vsi); } diff --git a/drivers/infiniband/hw/irdma/main.h b/drivers/infiniband/hw/irdma/main.h index d66d87bb8bc4..b65bc2ea542f 100644 --- a/drivers/infiniband/hw/irdma/main.h +++ b/drivers/infiniband/hw/irdma/main.h @@ -78,7 +78,7 @@ extern struct auxiliary_driver i40iw_auxiliary_drv; #define MAX_DPC_ITERATIONS 128 -#define IRDMA_EVENT_TIMEOUT 50000 +#define IRDMA_EVENT_TIMEOUT_MS 5000 #define IRDMA_VCHNL_EVENT_TIMEOUT 100000 #define IRDMA_RST_TIMEOUT_HZ 4 diff --git a/drivers/infiniband/hw/irdma/verbs.c b/drivers/infiniband/hw/irdma/verbs.c index 36e69e6ca9f8..5fa88e6cca4e 100644 --- a/drivers/infiniband/hw/irdma/verbs.c +++ b/drivers/infiniband/hw/irdma/verbs.c @@ -1157,6 +1157,21 @@ exit: return prio; } +static int irdma_wait_for_suspend(struct irdma_qp *iwqp) +{ + if (!wait_event_timeout(iwqp->iwdev->suspend_wq, + !iwqp->suspend_pending, + msecs_to_jiffies(IRDMA_EVENT_TIMEOUT_MS))) { + iwqp->suspend_pending = false; + ibdev_warn(&iwqp->iwdev->ibdev, + "modify_qp timed out waiting for suspend. qp_id = %d, last_ae = 0x%x\n", + iwqp->ibqp.qp_num, iwqp->last_aeq); + return -EBUSY; + } + + return 0; +} + /** * irdma_modify_qp_roce - modify qp request * @ibqp: qp's pointer for modify @@ -1420,6 +1435,7 @@ int irdma_modify_qp_roce(struct ib_qp *ibqp, struct ib_qp_attr *attr, info.next_iwarp_state = IRDMA_QP_STATE_SQD; issue_modify_qp = 1; + iwqp->suspend_pending = true; break; case IB_QPS_SQE: case IB_QPS_ERR: @@ -1460,6 +1476,11 @@ int irdma_modify_qp_roce(struct ib_qp *ibqp, struct ib_qp_attr *attr, ctx_info->rem_endpoint_idx = udp_info->arp_idx; if (irdma_hw_modify_qp(iwdev, iwqp, &info, true)) return -EINVAL; + if (info.next_iwarp_state == IRDMA_QP_STATE_SQD) { + ret = irdma_wait_for_suspend(iwqp); + if (ret) + return ret; + } spin_lock_irqsave(&iwqp->lock, flags); if (iwqp->iwarp_state == info.curr_iwarp_state) { iwqp->iwarp_state = info.next_iwarp_state; diff --git a/drivers/infiniband/hw/irdma/verbs.h b/drivers/infiniband/hw/irdma/verbs.h index c42ac22de00e..cfa140b36395 100644 --- a/drivers/infiniband/hw/irdma/verbs.h +++ b/drivers/infiniband/hw/irdma/verbs.h @@ -198,6 +198,7 @@ struct irdma_qp { u8 flush_issued : 1; u8 sig_all : 1; u8 pau_mode : 1; + u8 suspend_pending : 1; u8 rsvd : 1; u8 iwarp_state; u16 term_sq_flush_code; -- cgit v1.2.3 From 1fda5bb66ad8fb24ecb3858e61a13a6548428898 Mon Sep 17 00:00:00 2001 From: Yonghong Song Date: Fri, 10 Nov 2023 17:39:28 -0800 Subject: bpf: Do not allocate percpu memory at init stage Kirill Shutemov reported significant percpu memory consumption increase after booting in 288-cpu VM ([1]) due to commit 41a5db8d8161 ("bpf: Add support for non-fix-size percpu mem allocation"). The percpu memory consumption is increased from 111MB to 969MB. The number is from /proc/meminfo. I tried to reproduce the issue with my local VM which at most supports upto 255 cpus. With 252 cpus, without the above commit, the percpu memory consumption immediately after boot is 57MB while with the above commit the percpu memory consumption is 231MB. This is not good since so far percpu memory from bpf memory allocator is not widely used yet. Let us change pre-allocation in init stage to on-demand allocation when verifier detects there is a need of percpu memory for bpf program. With this change, percpu memory consumption after boot can be reduced signicantly. [1] https://lore.kernel.org/lkml/20231109154934.4saimljtqx625l3v@box.shutemov.name/ Fixes: 41a5db8d8161 ("bpf: Add support for non-fix-size percpu mem allocation") Reported-and-tested-by: Kirill A. Shutemov Signed-off-by: Yonghong Song Acked-by: Hou Tao Link: https://lore.kernel.org/r/20231111013928.948838-1-yonghong.song@linux.dev Signed-off-by: Alexei Starovoitov --- include/linux/bpf.h | 2 +- kernel/bpf/core.c | 8 +++----- kernel/bpf/verifier.c | 20 ++++++++++++++++++-- 3 files changed, 22 insertions(+), 8 deletions(-) diff --git a/include/linux/bpf.h b/include/linux/bpf.h index 35bff17396c0..6762dac3ef76 100644 --- a/include/linux/bpf.h +++ b/include/linux/bpf.h @@ -56,7 +56,7 @@ extern struct idr btf_idr; extern spinlock_t btf_idr_lock; extern struct kobject *btf_kobj; extern struct bpf_mem_alloc bpf_global_ma, bpf_global_percpu_ma; -extern bool bpf_global_ma_set, bpf_global_percpu_ma_set; +extern bool bpf_global_ma_set; typedef u64 (*bpf_callback_t)(u64, u64, u64, u64, u64); typedef int (*bpf_iter_init_seq_priv_t)(void *private_data, diff --git a/kernel/bpf/core.c b/kernel/bpf/core.c index 08626b519ce2..cd3afe57ece3 100644 --- a/kernel/bpf/core.c +++ b/kernel/bpf/core.c @@ -64,8 +64,8 @@ #define OFF insn->off #define IMM insn->imm -struct bpf_mem_alloc bpf_global_ma, bpf_global_percpu_ma; -bool bpf_global_ma_set, bpf_global_percpu_ma_set; +struct bpf_mem_alloc bpf_global_ma; +bool bpf_global_ma_set; /* No hurry in this branch * @@ -2934,9 +2934,7 @@ static int __init bpf_global_ma_init(void) ret = bpf_mem_alloc_init(&bpf_global_ma, 0, false); bpf_global_ma_set = !ret; - ret = bpf_mem_alloc_init(&bpf_global_percpu_ma, 0, true); - bpf_global_percpu_ma_set = !ret; - return !bpf_global_ma_set || !bpf_global_percpu_ma_set; + return ret; } late_initcall(bpf_global_ma_init); #endif diff --git a/kernel/bpf/verifier.c b/kernel/bpf/verifier.c index a2267d5ed14e..6da370a047fe 100644 --- a/kernel/bpf/verifier.c +++ b/kernel/bpf/verifier.c @@ -26,6 +26,7 @@ #include #include #include +#include #include #include "disasm.h" @@ -41,6 +42,9 @@ static const struct bpf_verifier_ops * const bpf_verifier_ops[] = { #undef BPF_LINK_TYPE }; +struct bpf_mem_alloc bpf_global_percpu_ma; +static bool bpf_global_percpu_ma_set; + /* bpf_check() is a static code analyzer that walks eBPF program * instruction by instruction and updates register/stack state. * All paths of conditional branches are analyzed until 'bpf_exit' insn. @@ -336,6 +340,7 @@ struct bpf_kfunc_call_arg_meta { struct btf *btf_vmlinux; static DEFINE_MUTEX(bpf_verifier_lock); +static DEFINE_MUTEX(bpf_percpu_ma_lock); static const struct bpf_line_info * find_linfo(const struct bpf_verifier_env *env, u32 insn_off) @@ -12091,8 +12096,19 @@ static int check_kfunc_call(struct bpf_verifier_env *env, struct bpf_insn *insn, if (meta.func_id == special_kfunc_list[KF_bpf_obj_new_impl] && !bpf_global_ma_set) return -ENOMEM; - if (meta.func_id == special_kfunc_list[KF_bpf_percpu_obj_new_impl] && !bpf_global_percpu_ma_set) - return -ENOMEM; + if (meta.func_id == special_kfunc_list[KF_bpf_percpu_obj_new_impl]) { + if (!bpf_global_percpu_ma_set) { + mutex_lock(&bpf_percpu_ma_lock); + if (!bpf_global_percpu_ma_set) { + err = bpf_mem_alloc_init(&bpf_global_percpu_ma, 0, true); + if (!err) + bpf_global_percpu_ma_set = true; + } + mutex_unlock(&bpf_percpu_ma_lock); + if (err) + return err; + } + } if (((u64)(u32)meta.arg_constant.value) != meta.arg_constant.value) { verbose(env, "local type ID argument must be in range [0, U32_MAX]\n"); -- cgit v1.2.3 From 430143b0d3611f4a9c8434319e5e504244749e79 Mon Sep 17 00:00:00 2001 From: Brenton Simpson Date: Tue, 14 Nov 2023 23:38:59 +0000 Subject: drm: panel-orientation-quirks: Add quirk for Lenovo Legion Go MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The Legion Go has a 2560x1600 portrait screen, with the native "up" facing the right controller (90° CW from the rest of the device). Signed-off-by: Brenton Simpson Signed-off-by: Hans de Goede Link: https://lore.kernel.org/r/20231114233859.274189-1-appsforartists@google.com --- drivers/gpu/drm/drm_panel_orientation_quirks.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/gpu/drm/drm_panel_orientation_quirks.c b/drivers/gpu/drm/drm_panel_orientation_quirks.c index d5c15292ae93..3d92f66e550c 100644 --- a/drivers/gpu/drm/drm_panel_orientation_quirks.c +++ b/drivers/gpu/drm/drm_panel_orientation_quirks.c @@ -336,6 +336,12 @@ static const struct dmi_system_id orientation_data[] = { DMI_EXACT_MATCH(DMI_PRODUCT_VERSION, "IdeaPad Duet 3 10IGL5"), }, .driver_data = (void *)&lcd1200x1920_rightside_up, + }, { /* Lenovo Legion Go 8APU1 */ + .matches = { + DMI_EXACT_MATCH(DMI_SYS_VENDOR, "LENOVO"), + DMI_EXACT_MATCH(DMI_PRODUCT_VERSION, "Legion Go 8APU1"), + }, + .driver_data = (void *)&lcd1600x2560_leftside_up, }, { /* Lenovo Yoga Book X90F / X90L */ .matches = { DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Intel Corporation"), -- cgit v1.2.3 From 1645c283a87c61f84b2bffd81f50724df959b11a Mon Sep 17 00:00:00 2001 From: Qu Wenruo Date: Tue, 24 Oct 2023 12:41:11 +1030 Subject: btrfs: tree-checker: add type and sequence check for inline backrefs [BUG] There is a bug report that ntfs2btrfs had a bug that it can lead to transaction abort and the filesystem flips to read-only. [CAUSE] For inline backref items, kernel has a strict requirement for their ordered, they must follow the following rules: - All btrfs_extent_inline_ref::type should be in an ascending order - Within the same type, the items should follow a descending order by their sequence number For EXTENT_DATA_REF type, the sequence number is result from hash_extent_data_ref(). For other types, their sequence numbers are btrfs_extent_inline_ref::offset. Thus if there is any code not following above rules, the resulted inline backrefs can prevent the kernel to locate the needed inline backref and lead to transaction abort. [FIX] Ntrfs2btrfs has already fixed the problem, and btrfs-progs has added the ability to detect such problems. For kernel, let's be more noisy and be more specific about the order, so that the next time kernel hits such problem we would reject it in the first place, without leading to transaction abort. Link: https://github.com/kdave/btrfs-progs/pull/622 Reviewed-by: Josef Bacik Signed-off-by: Qu Wenruo Signed-off-by: David Sterba --- fs/btrfs/tree-checker.c | 39 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 39 insertions(+) diff --git a/fs/btrfs/tree-checker.c b/fs/btrfs/tree-checker.c index a416cbea75d1..50fdc69fdddf 100644 --- a/fs/btrfs/tree-checker.c +++ b/fs/btrfs/tree-checker.c @@ -31,6 +31,7 @@ #include "inode-item.h" #include "dir-item.h" #include "raid-stripe-tree.h" +#include "extent-tree.h" /* * Error message should follow the following format: @@ -1276,6 +1277,8 @@ static int check_extent_item(struct extent_buffer *leaf, unsigned long ptr; /* Current pointer inside inline refs */ unsigned long end; /* Extent item end */ const u32 item_size = btrfs_item_size(leaf, slot); + u8 last_type = 0; + u64 last_seq = U64_MAX; u64 flags; u64 generation; u64 total_refs; /* Total refs in btrfs_extent_item */ @@ -1322,6 +1325,18 @@ static int check_extent_item(struct extent_buffer *leaf, * 2.2) Ref type specific data * Either using btrfs_extent_inline_ref::offset, or specific * data structure. + * + * All above inline items should follow the order: + * + * - All btrfs_extent_inline_ref::type should be in an ascending + * order + * + * - Within the same type, the items should follow a descending + * order by their sequence number. The sequence number is + * determined by: + * * btrfs_extent_inline_ref::offset for all types other than + * EXTENT_DATA_REF + * * hash_extent_data_ref() for EXTENT_DATA_REF */ if (unlikely(item_size < sizeof(*ei))) { extent_err(leaf, slot, @@ -1403,6 +1418,7 @@ static int check_extent_item(struct extent_buffer *leaf, struct btrfs_extent_inline_ref *iref; struct btrfs_extent_data_ref *dref; struct btrfs_shared_data_ref *sref; + u64 seq; u64 dref_offset; u64 inline_offset; u8 inline_type; @@ -1416,6 +1432,7 @@ static int check_extent_item(struct extent_buffer *leaf, iref = (struct btrfs_extent_inline_ref *)ptr; inline_type = btrfs_extent_inline_ref_type(leaf, iref); inline_offset = btrfs_extent_inline_ref_offset(leaf, iref); + seq = inline_offset; if (unlikely(ptr + btrfs_extent_inline_ref_size(inline_type) > end)) { extent_err(leaf, slot, "inline ref item overflows extent item, ptr %lu iref size %u end %lu", @@ -1446,6 +1463,10 @@ static int check_extent_item(struct extent_buffer *leaf, case BTRFS_EXTENT_DATA_REF_KEY: dref = (struct btrfs_extent_data_ref *)(&iref->offset); dref_offset = btrfs_extent_data_ref_offset(leaf, dref); + seq = hash_extent_data_ref( + btrfs_extent_data_ref_root(leaf, dref), + btrfs_extent_data_ref_objectid(leaf, dref), + btrfs_extent_data_ref_offset(leaf, dref)); if (unlikely(!IS_ALIGNED(dref_offset, fs_info->sectorsize))) { extent_err(leaf, slot, @@ -1475,6 +1496,24 @@ static int check_extent_item(struct extent_buffer *leaf, inline_type); return -EUCLEAN; } + if (inline_type < last_type) { + extent_err(leaf, slot, + "inline ref out-of-order: has type %u, prev type %u", + inline_type, last_type); + return -EUCLEAN; + } + /* Type changed, allow the sequence starts from U64_MAX again. */ + if (inline_type > last_type) + last_seq = U64_MAX; + if (seq > last_seq) { + extent_err(leaf, slot, +"inline ref out-of-order: has type %u offset %llu seq 0x%llx, prev type %u seq 0x%llx", + inline_type, inline_offset, seq, + last_type, last_seq); + return -EUCLEAN; + } + last_type = inline_type; + last_seq = seq; ptr += btrfs_extent_inline_ref_size(inline_type); } /* No padding is allowed */ -- cgit v1.2.3 From 8049ba5d0a28c7208285e94e71a8df5e41a2e889 Mon Sep 17 00:00:00 2001 From: Qu Wenruo Date: Sat, 11 Nov 2023 07:14:57 +1030 Subject: btrfs: do not abort transaction if there is already an existing qgroup [BUG] Syzbot reported a regression that after commit 6ed05643ddb1 ("btrfs: create qgroup earlier in snapshot creation") we can trigger transaction abort during snapshot creation: BTRFS: Transaction aborted (error -17) WARNING: CPU: 0 PID: 5057 at fs/btrfs/transaction.c:1778 create_pending_snapshot+0x25f4/0x2b70 fs/btrfs/transaction.c:1778 Modules linked in: CPU: 0 PID: 5057 Comm: syz-executor225 Not tainted 6.6.0-syzkaller-15365-g305230142ae0 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/09/2023 RIP: 0010:create_pending_snapshot+0x25f4/0x2b70 fs/btrfs/transaction.c:1778 Call Trace: create_pending_snapshots+0x195/0x1d0 fs/btrfs/transaction.c:1967 btrfs_commit_transaction+0xf1c/0x3730 fs/btrfs/transaction.c:2440 create_snapshot+0x4a5/0x7e0 fs/btrfs/ioctl.c:845 btrfs_mksubvol+0x5d0/0x750 fs/btrfs/ioctl.c:995 btrfs_mksnapshot+0xb5/0xf0 fs/btrfs/ioctl.c:1041 __btrfs_ioctl_snap_create+0x344/0x460 fs/btrfs/ioctl.c:1294 btrfs_ioctl_snap_create+0x13c/0x190 fs/btrfs/ioctl.c:1321 btrfs_ioctl+0xbbf/0xd40 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:871 [inline] __se_sys_ioctl+0xf8/0x170 fs/ioctl.c:857 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x44/0x110 arch/x86/entry/common.c:82 entry_SYSCALL_64_after_hwframe+0x63/0x6b RIP: 0033:0x7f2f791127b9 [CAUSE] The error number is -EEXIST, which can happen for qgroup if there is already an existing qgroup and then we're trying to create a snapshot for it. [FIX] In that case, we can continue creating the snapshot, although it may lead to qgroup inconsistency, it's not so critical to abort the current transaction. So in this case, we can just ignore the non-critical errors, mostly -EEXIST (there is already a qgroup). Reported-by: syzbot+4d81015bc10889fd12ea@syzkaller.appspotmail.com Fixes: 6ed05643ddb1 ("btrfs: create qgroup earlier in snapshot creation") Reviewed-by: Filipe Manana Signed-off-by: Qu Wenruo Signed-off-by: David Sterba --- fs/btrfs/transaction.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/btrfs/transaction.c b/fs/btrfs/transaction.c index 9694a3ca1739..7af9665bebae 100644 --- a/fs/btrfs/transaction.c +++ b/fs/btrfs/transaction.c @@ -1774,7 +1774,7 @@ static noinline int create_pending_snapshot(struct btrfs_trans_handle *trans, btrfs_release_path(path); ret = btrfs_create_qgroup(trans, objectid); - if (ret) { + if (ret && ret != -EEXIST) { btrfs_abort_transaction(trans, ret); goto fail; } -- cgit v1.2.3 From ae1aadb1eb8d3cbc52e42bee71d67bd4a71f9f07 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Thu, 16 Nov 2023 00:39:33 +1000 Subject: nouveau: don't fail driver load if no display hw present. If we get back ENODEV don't fail load. There are nvidia devices that don't have display blocks and the driver should work on those. Fixes: 15740541e8f0 ("drm/nouveau/devinit/tu102-: prepare for GSP-RM") Link: https://gitlab.freedesktop.org/drm/nouveau/-/issues/270 Signed-off-by: Dave Airlie Signed-off-by: Danilo Krummrich Link: https://patchwork.freedesktop.org/patch/msgid/20231115143933.261287-1-airlied@gmail.com --- drivers/gpu/drm/nouveau/nouveau_display.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/gpu/drm/nouveau/nouveau_display.c b/drivers/gpu/drm/nouveau/nouveau_display.c index d8c92521226d..f28f9a857458 100644 --- a/drivers/gpu/drm/nouveau/nouveau_display.c +++ b/drivers/gpu/drm/nouveau/nouveau_display.c @@ -726,6 +726,11 @@ nouveau_display_create(struct drm_device *dev) if (nouveau_modeset != 2) { ret = nvif_disp_ctor(&drm->client.device, "kmsDisp", 0, &disp->disp); + /* no display hw */ + if (ret == -ENODEV) { + ret = 0; + goto disp_create_err; + } if (!ret && (disp->disp.outp_mask || drm->vbios.dcb.entries)) { nouveau_display_create_properties(dev); -- cgit v1.2.3 From 61cbc08fdb04fd445458b0f4cba7e6929afdfaef Mon Sep 17 00:00:00 2001 From: Stefan Binding Date: Wed, 15 Nov 2023 16:21:15 +0000 Subject: ALSA: hda/realtek: Add quirks for ASUS 2024 Zenbooks These ASUS Zenbook laptops use Realtek HDA codec combined with 2xCS35L41 Amplifiers using SPI or I2C with External Boost or Internal Boost. Signed-off-by: Stefan Binding Cc: Link: https://lore.kernel.org/r/20231115162116.494968-2-sbinding@opensource.cirrus.com Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 3c85b8247c11..a1e124370283 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -9947,13 +9947,17 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x1043, 0x19e1, "ASUS UX581LV", ALC295_FIXUP_ASUS_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x1043, 0x1a13, "Asus G73Jw", ALC269_FIXUP_ASUS_G73JW), SND_PCI_QUIRK(0x1043, 0x1a30, "ASUS X705UD", ALC256_FIXUP_ASUS_MIC), + SND_PCI_QUIRK(0x1043, 0x1a63, "ASUS UX3405MA", ALC245_FIXUP_CS35L41_SPI_2), SND_PCI_QUIRK(0x1043, 0x1a83, "ASUS UM5302LA", ALC294_FIXUP_CS35L41_I2C_2), SND_PCI_QUIRK(0x1043, 0x1a8f, "ASUS UX582ZS", ALC245_FIXUP_CS35L41_SPI_2), SND_PCI_QUIRK(0x1043, 0x1b11, "ASUS UX431DA", ALC294_FIXUP_ASUS_COEF_1B), SND_PCI_QUIRK(0x1043, 0x1b13, "Asus U41SV", ALC269_FIXUP_INV_DMIC), SND_PCI_QUIRK(0x1043, 0x1b93, "ASUS G614JVR/JIR", ALC245_FIXUP_CS35L41_SPI_2), SND_PCI_QUIRK(0x1043, 0x1bbd, "ASUS Z550MA", ALC255_FIXUP_ASUS_MIC_NO_PRESENCE), + SND_PCI_QUIRK(0x1043, 0x1c03, "ASUS UM3406HA", ALC287_FIXUP_CS35L41_I2C_2), SND_PCI_QUIRK(0x1043, 0x1c23, "Asus X55U", ALC269_FIXUP_LIMIT_INT_MIC_BOOST), + SND_PCI_QUIRK(0x1043, 0x1c33, "ASUS UX5304MA", ALC245_FIXUP_CS35L41_SPI_2), + SND_PCI_QUIRK(0x1043, 0x1c43, "ASUS UX8406MA", ALC245_FIXUP_CS35L41_SPI_2), SND_PCI_QUIRK(0x1043, 0x1c62, "ASUS GU603", ALC289_FIXUP_ASUS_GA401), SND_PCI_QUIRK(0x1043, 0x1c92, "ASUS ROG Strix G15", ALC285_FIXUP_ASUS_G533Z_PINS), SND_PCI_QUIRK(0x1043, 0x1c9f, "ASUS G614JI", ALC285_FIXUP_ASUS_HEADSET_MIC), -- cgit v1.2.3 From 5d639b60971f003d3a9b2b31f8ec73b0718b5d57 Mon Sep 17 00:00:00 2001 From: Stefan Binding Date: Wed, 15 Nov 2023 16:21:16 +0000 Subject: ALSA: hda/realtek: Add quirks for HP Laptops These HP laptops use Realtek HDA codec combined with 2 or 4 CS35L41 Amplifiers using SPI with Internal Boost. Signed-off-by: Stefan Binding Cc: Link: https://lore.kernel.org/r/20231115162116.494968-3-sbinding@opensource.cirrus.com Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index a1e124370283..5618b1d9bfd1 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -9902,6 +9902,9 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x103c, 0x8c70, "HP EliteBook 835 G11", ALC287_FIXUP_CS35L41_I2C_2_HP_GPIO_LED), SND_PCI_QUIRK(0x103c, 0x8c71, "HP EliteBook 845 G11", ALC287_FIXUP_CS35L41_I2C_2_HP_GPIO_LED), SND_PCI_QUIRK(0x103c, 0x8c72, "HP EliteBook 865 G11", ALC287_FIXUP_CS35L41_I2C_2_HP_GPIO_LED), + SND_PCI_QUIRK(0x103c, 0x8ca4, "HP ZBook Fury", ALC245_FIXUP_CS35L41_SPI_2_HP_GPIO_LED), + SND_PCI_QUIRK(0x103c, 0x8ca7, "HP ZBook Fury", ALC245_FIXUP_CS35L41_SPI_2_HP_GPIO_LED), + SND_PCI_QUIRK(0x103c, 0x8cf5, "HP ZBook Studio 16", ALC245_FIXUP_CS35L41_SPI_4_HP_GPIO_LED), SND_PCI_QUIRK(0x1043, 0x103e, "ASUS X540SA", ALC256_FIXUP_ASUS_MIC), SND_PCI_QUIRK(0x1043, 0x103f, "ASUS TX300", ALC282_FIXUP_ASUS_TX300), SND_PCI_QUIRK(0x1043, 0x106d, "Asus K53BE", ALC269_FIXUP_LIMIT_INT_MIC_BOOST), -- cgit v1.2.3 From 85c2ceaafbd306814a3a4740bf4d95ac26a8b36a Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Mon, 6 Nov 2023 17:07:40 +0300 Subject: mm/damon/sysfs: eliminate potential uninitialized variable warning The "err" variable is not initialized if damon_target_has_pid(ctx) is false and sys_target->regions->nr is zero. Link: https://lkml.kernel.org/r/739e6aaf-a634-4e33-98a8-16546379ec9f@moroto.mountain Fixes: 0bcd216c4741 ("mm/damon/sysfs: update monitoring target regions for online input commit") Signed-off-by: Dan Carpenter Reviewed-by: SeongJae Park Signed-off-by: Andrew Morton --- mm/damon/sysfs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/mm/damon/sysfs.c b/mm/damon/sysfs.c index e27846708b5a..1dfa96d4de99 100644 --- a/mm/damon/sysfs.c +++ b/mm/damon/sysfs.c @@ -1172,7 +1172,7 @@ static int damon_sysfs_update_target(struct damon_target *target, struct damon_ctx *ctx, struct damon_sysfs_target *sys_target) { - int err; + int err = 0; if (damon_target_has_pid(ctx)) { err = damon_sysfs_update_target_pid(target, sys_target->pid); -- cgit v1.2.3 From 019b277b680f5b95135c042c78dd79318d8f9e3c Mon Sep 17 00:00:00 2001 From: Muhammad Usama Anjum Date: Fri, 3 Nov 2023 23:23:41 +0500 Subject: selftests: mm: skip whole test instead of failure Some architectures don't support userfaultfd. Skip running the whole test on them instead of registering the failure. Link: https://lkml.kernel.org/r/20231103182343.2874015-1-usama.anjum@collabora.com Fixes: 46fd75d4a3c9 ("selftests: mm: add pagemap ioctl tests") Reported-by: Ryan Roberts Closes: https://lore.kernel.org/all/f8463381-2697-49e9-9460-9dc73452830d@arm.com Signed-off-by: Muhammad Usama Anjum Cc: Shuah Khan Signed-off-by: Andrew Morton --- tools/testing/selftests/mm/pagemap_ioctl.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) diff --git a/tools/testing/selftests/mm/pagemap_ioctl.c b/tools/testing/selftests/mm/pagemap_ioctl.c index 0161fb49fc6e..f8685a2ea07e 100644 --- a/tools/testing/selftests/mm/pagemap_ioctl.c +++ b/tools/testing/selftests/mm/pagemap_ioctl.c @@ -94,19 +94,19 @@ int init_uffd(void) uffd = syscall(__NR_userfaultfd, O_CLOEXEC | O_NONBLOCK | UFFD_USER_MODE_ONLY); if (uffd == -1) - ksft_exit_fail_msg("uffd syscall failed\n"); + return uffd; uffdio_api.api = UFFD_API; uffdio_api.features = UFFD_FEATURE_WP_UNPOPULATED | UFFD_FEATURE_WP_ASYNC | UFFD_FEATURE_WP_HUGETLBFS_SHMEM; if (ioctl(uffd, UFFDIO_API, &uffdio_api)) - ksft_exit_fail_msg("UFFDIO_API\n"); + return -1; if (!(uffdio_api.api & UFFDIO_REGISTER_MODE_WP) || !(uffdio_api.features & UFFD_FEATURE_WP_UNPOPULATED) || !(uffdio_api.features & UFFD_FEATURE_WP_ASYNC) || !(uffdio_api.features & UFFD_FEATURE_WP_HUGETLBFS_SHMEM)) - ksft_exit_fail_msg("UFFDIO_API error %llu\n", uffdio_api.api); + return -1; return 0; } @@ -1479,6 +1479,10 @@ int main(void) struct stat sbuf; ksft_print_header(); + + if (init_uffd()) + return ksft_exit_pass(); + ksft_set_plan(115); page_size = getpagesize(); @@ -1488,9 +1492,6 @@ int main(void) if (pagemap_fd < 0) return -EINVAL; - if (init_uffd()) - ksft_exit_fail_msg("uffd init failed\n"); - /* 1. Sanity testing */ sanity_tests_sd(); -- cgit v1.2.3 From 9297e5360c3bd777f95d5146dbeda7fb9ba4273a Mon Sep 17 00:00:00 2001 From: Muhammad Usama Anjum Date: Fri, 3 Nov 2023 23:23:42 +0500 Subject: selftests: mm: fix some build warnings Fix build warnings: pagemap_ioctl.c:1154:38: warning: format `%s' expects a matching `char *' argument [-Wformat=] pagemap_ioctl.c:1162:51: warning: format `%ld' expects argument of type `long int', but argument 2 has type `int' [-Wformat=] pagemap_ioctl.c:1192:51: warning: format `%ld' expects argument of type `long int', but argument 2 has type `int' [-Wformat=] pagemap_ioctl.c:1600:51: warning: format `%ld' expects argument of type `long int', but argument 2 has type `int' [-Wformat=] pagemap_ioctl.c:1628:51: warning: format `%ld' expects argument of type `long int', but argument 2 has type `int' [-Wformat=] Link: https://lkml.kernel.org/r/20231103182343.2874015-2-usama.anjum@collabora.com Fixes: 46fd75d4a3c9 ("selftests: mm: add pagemap ioctl tests") Signed-off-by: Muhammad Usama Anjum Cc: Shuah Khan Cc: Ryan Roberts Signed-off-by: Andrew Morton --- tools/testing/selftests/mm/pagemap_ioctl.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/tools/testing/selftests/mm/pagemap_ioctl.c b/tools/testing/selftests/mm/pagemap_ioctl.c index f8685a2ea07e..befab43719ba 100644 --- a/tools/testing/selftests/mm/pagemap_ioctl.c +++ b/tools/testing/selftests/mm/pagemap_ioctl.c @@ -1151,7 +1151,7 @@ int sanity_tests(void) /* 9. Memory mapped file */ fd = open(__FILE__, O_RDONLY); if (fd < 0) - ksft_exit_fail_msg("%s Memory mapped file\n"); + ksft_exit_fail_msg("%s Memory mapped file\n", __func__); ret = stat(__FILE__, &sbuf); if (ret < 0) @@ -1159,7 +1159,7 @@ int sanity_tests(void) fmem = mmap(NULL, sbuf.st_size, PROT_READ, MAP_PRIVATE, fd, 0); if (fmem == MAP_FAILED) - ksft_exit_fail_msg("error nomem %ld %s\n", errno, strerror(errno)); + ksft_exit_fail_msg("error nomem %d %s\n", errno, strerror(errno)); tmp_buf = malloc(sbuf.st_size); memcpy(tmp_buf, fmem, sbuf.st_size); @@ -1189,7 +1189,7 @@ int sanity_tests(void) fmem = mmap(NULL, buf_size, PROT_READ | PROT_WRITE, MAP_PRIVATE, fd, 0); if (fmem == MAP_FAILED) - ksft_exit_fail_msg("error nomem %ld %s\n", errno, strerror(errno)); + ksft_exit_fail_msg("error nomem %d %s\n", errno, strerror(errno)); wp_init(fmem, buf_size); wp_addr_range(fmem, buf_size); @@ -1596,7 +1596,7 @@ int main(void) fmem = mmap(NULL, sbuf.st_size, PROT_READ | PROT_WRITE, MAP_PRIVATE, fd, 0); if (fmem == MAP_FAILED) - ksft_exit_fail_msg("error nomem %ld %s\n", errno, strerror(errno)); + ksft_exit_fail_msg("error nomem %d %s\n", errno, strerror(errno)); wp_init(fmem, sbuf.st_size); wp_addr_range(fmem, sbuf.st_size); @@ -1624,7 +1624,7 @@ int main(void) fmem = mmap(NULL, buf_size, PROT_READ | PROT_WRITE, MAP_PRIVATE, fd, 0); if (fmem == MAP_FAILED) - ksft_exit_fail_msg("error nomem %ld %s\n", errno, strerror(errno)); + ksft_exit_fail_msg("error nomem %d %s\n", errno, strerror(errno)); wp_init(fmem, buf_size); wp_addr_range(fmem, buf_size); -- cgit v1.2.3 From dd9b35efd719be242e227f9eebad1e50ea5c914f Mon Sep 17 00:00:00 2001 From: Breno Leitao Date: Fri, 3 Nov 2023 10:33:59 -0700 Subject: selftests/mm: restore number of hugepages The test mm `hugetlb_fault_after_madv` selftest needs one and only one huge page to run, thus it sets `/proc/sys/vm/nr_hugepages` to 1. The problem is that further tests require the previous number of hugepages allocated in order to succeed. Save the number of huge pages before changing it, and restore it once the test finishes, so, further tests could run successfully. Link: https://lkml.kernel.org/r/20231103173400.1608403-1-leitao@debian.org Fixes: 116d57303a05 ("selftests/mm: add a new test for madv and hugetlb") Signed-off-by: Breno Leitao Reported-by: Ryan Roberts Closes: https://lore.kernel.org/all/662df57e-47f1-4c15-9b84-f2f2d587fc5c@arm.com/ Signed-off-by: Andrew Morton --- tools/testing/selftests/mm/run_vmtests.sh | 3 +++ 1 file changed, 3 insertions(+) diff --git a/tools/testing/selftests/mm/run_vmtests.sh b/tools/testing/selftests/mm/run_vmtests.sh index cc16f6ca8533..00757445278e 100755 --- a/tools/testing/selftests/mm/run_vmtests.sh +++ b/tools/testing/selftests/mm/run_vmtests.sh @@ -223,9 +223,12 @@ CATEGORY="hugetlb" run_test ./hugepage-mremap CATEGORY="hugetlb" run_test ./hugepage-vmemmap CATEGORY="hugetlb" run_test ./hugetlb-madvise +nr_hugepages_tmp=$(cat /proc/sys/vm/nr_hugepages) # For this test, we need one and just one huge page echo 1 > /proc/sys/vm/nr_hugepages CATEGORY="hugetlb" run_test ./hugetlb_fault_after_madv +# Restore the previous number of huge pages, since further tests rely on it +echo "$nr_hugepages_tmp" > /proc/sys/vm/nr_hugepages if test_selected "hugetlb"; then echo "NOTE: These hugetlb tests provide minimal coverage. Use" -- cgit v1.2.3 From edf14544324dd036183fafe372fe5709708bdddd Mon Sep 17 00:00:00 2001 From: Breno Leitao Date: Fri, 3 Nov 2023 10:34:00 -0700 Subject: selftests/mm: add hugetlb_fault_after_madv to .gitignore commit 116d57303a05 ("selftests/mm: add a new test for madv and hugetlb") added a new test case, but, it didn't add the binary name in tools/testing/selftests/mm/.gitignore. Add hugetlb_fault_after_madv to tools/testing/selftests/mm/.gitignore. Link: https://lkml.kernel.org/r/20231103173400.1608403-2-leitao@debian.org Fixes: 116d57303a05 ("selftests/mm: add a new test for madv and hugetlb") Signed-off-by: Breno Leitao Reported-by: Ryan Roberts Closes: https://lore.kernel.org/all/662df57e-47f1-4c15-9b84-f2f2d587fc5c@arm.com/ Signed-off-by: Andrew Morton --- tools/testing/selftests/mm/.gitignore | 1 + 1 file changed, 1 insertion(+) diff --git a/tools/testing/selftests/mm/.gitignore b/tools/testing/selftests/mm/.gitignore index cc920c79ff1c..4ff10ea61461 100644 --- a/tools/testing/selftests/mm/.gitignore +++ b/tools/testing/selftests/mm/.gitignore @@ -45,3 +45,4 @@ mdwe_test gup_longterm mkdirty va_high_addr_switch +hugetlb_fault_after_madv -- cgit v1.2.3 From a48d5bdc877b85201e42cef9c2fdf5378164c23a Mon Sep 17 00:00:00 2001 From: Stefan Roesch Date: Mon, 6 Nov 2023 10:19:18 -0800 Subject: mm: fix for negative counter: nr_file_hugepages While qualifiying the 6.4 release, the following warning was detected in messages: vmstat_refresh: nr_file_hugepages -15664 The warning is caused by the incorrect updating of the NR_FILE_THPS counter in the function split_huge_page_to_list. The if case is checking for folio_test_swapbacked, but the else case is missing the check for folio_test_pmd_mappable. The other functions that manipulate the counter like __filemap_add_folio and filemap_unaccount_folio have the corresponding check. I have a test case, which reproduces the problem. It can be found here: https://github.com/sroeschus/testcase/blob/main/vmstat_refresh/madv.c The test case reproduces on an XFS filesystem. Running the same test case on a BTRFS filesystem does not reproduce the problem. AFAIK version 6.1 until 6.6 are affected by this problem. [akpm@linux-foundation.org: whitespace fix] [shr@devkernel.io: test for folio_test_pmd_mappable()] Link: https://lkml.kernel.org/r/20231108171517.2436103-1-shr@devkernel.io Link: https://lkml.kernel.org/r/20231106181918.1091043-1-shr@devkernel.io Signed-off-by: Stefan Roesch Co-debugged-by: Johannes Weiner Acked-by: Johannes Weiner Reviewed-by: Matthew Wilcox (Oracle) Reviewed-by: David Hildenbrand Reviewed-by: Yang Shi Cc: Rik van Riel Cc: Signed-off-by: Andrew Morton --- mm/huge_memory.c | 16 +++++++++------- 1 file changed, 9 insertions(+), 7 deletions(-) diff --git a/mm/huge_memory.c b/mm/huge_memory.c index f31f02472396..4f542444a91f 100644 --- a/mm/huge_memory.c +++ b/mm/huge_memory.c @@ -2769,13 +2769,15 @@ int split_huge_page_to_list(struct page *page, struct list_head *list) int nr = folio_nr_pages(folio); xas_split(&xas, folio, folio_order(folio)); - if (folio_test_swapbacked(folio)) { - __lruvec_stat_mod_folio(folio, NR_SHMEM_THPS, - -nr); - } else { - __lruvec_stat_mod_folio(folio, NR_FILE_THPS, - -nr); - filemap_nr_thps_dec(mapping); + if (folio_test_pmd_mappable(folio)) { + if (folio_test_swapbacked(folio)) { + __lruvec_stat_mod_folio(folio, + NR_SHMEM_THPS, -nr); + } else { + __lruvec_stat_mod_folio(folio, + NR_FILE_THPS, -nr); + filemap_nr_thps_dec(mapping); + } } } -- cgit v1.2.3 From b4936b544b08ed44949055b92bd25f77759ebafc Mon Sep 17 00:00:00 2001 From: SeongJae Park Date: Mon, 6 Nov 2023 23:34:06 +0000 Subject: mm/damon/sysfs: check error from damon_sysfs_update_target() Patch series "mm/damon/sysfs: fix unhandled return values". Some of DAMON sysfs interface code is not handling return values from some functions. As a result, confusing user input handling or NULL-dereference is possible. Check those properly. This patch (of 3): damon_sysfs_update_target() returns error code for failures, but its caller, damon_sysfs_set_targets() is ignoring that. The update function seems making no critical change in case of such failures, but the behavior will look like DAMON sysfs is silently ignoring or only partially accepting the user input. Fix it. Link: https://lkml.kernel.org/r/20231106233408.51159-1-sj@kernel.org Link: https://lkml.kernel.org/r/20231106233408.51159-2-sj@kernel.org Fixes: 19467a950b49 ("mm/damon/sysfs: remove requested targets when online-commit inputs") Signed-off-by: SeongJae Park Cc: [5.19+] Signed-off-by: Andrew Morton --- mm/damon/sysfs.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/mm/damon/sysfs.c b/mm/damon/sysfs.c index 1dfa96d4de99..7472404456aa 100644 --- a/mm/damon/sysfs.c +++ b/mm/damon/sysfs.c @@ -1203,8 +1203,10 @@ static int damon_sysfs_set_targets(struct damon_ctx *ctx, damon_for_each_target_safe(t, next, ctx) { if (i < sysfs_targets->nr) { - damon_sysfs_update_target(t, ctx, + err = damon_sysfs_update_target(t, ctx, sysfs_targets->targets_arr[i]); + if (err) + return err; } else { if (damon_target_has_pid(ctx)) put_pid(t->pid); -- cgit v1.2.3 From 84055688b6bc075c92a88e2d6c3ad26ab93919f9 Mon Sep 17 00:00:00 2001 From: SeongJae Park Date: Mon, 6 Nov 2023 23:34:07 +0000 Subject: mm/damon/sysfs-schemes: handle tried regions sysfs directory allocation failure DAMOS tried regions sysfs directory allocation function (damon_sysfs_scheme_regions_alloc()) is not handling the memory allocation failure. In the case, the code will dereference NULL pointer. Handle the failure to avoid such invalid access. Link: https://lkml.kernel.org/r/20231106233408.51159-3-sj@kernel.org Fixes: 9277d0367ba1 ("mm/damon/sysfs-schemes: implement scheme region directory") Signed-off-by: SeongJae Park Cc: [6.2+] Signed-off-by: Andrew Morton --- mm/damon/sysfs-schemes.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/mm/damon/sysfs-schemes.c b/mm/damon/sysfs-schemes.c index 45bd0fd4a8b1..7413cb35c5a9 100644 --- a/mm/damon/sysfs-schemes.c +++ b/mm/damon/sysfs-schemes.c @@ -162,6 +162,9 @@ damon_sysfs_scheme_regions_alloc(void) struct damon_sysfs_scheme_regions *regions = kmalloc(sizeof(*regions), GFP_KERNEL); + if (!regions) + return NULL; + regions->kobj = (struct kobject){}; INIT_LIST_HEAD(®ions->regions_list); regions->nr_regions = 0; -- cgit v1.2.3 From ae636ae2bbfd9279f5681dbf320d1da817e52b68 Mon Sep 17 00:00:00 2001 From: SeongJae Park Date: Mon, 6 Nov 2023 23:34:08 +0000 Subject: mm/damon/sysfs-schemes: handle tried region directory allocation failure DAMON sysfs interface's before_damos_apply callback (damon_sysfs_before_damos_apply()), which creates the DAMOS tried regions for each DAMOS action applied region, is not handling the allocation failure for the sysfs directory data. As a result, NULL pointer derefeence is possible. Fix it by handling the case. Link: https://lkml.kernel.org/r/20231106233408.51159-4-sj@kernel.org Fixes: f1d13cacabe1 ("mm/damon/sysfs: implement DAMOS tried regions update command") Signed-off-by: SeongJae Park Cc: [6.2+] Signed-off-by: Andrew Morton --- mm/damon/sysfs-schemes.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/mm/damon/sysfs-schemes.c b/mm/damon/sysfs-schemes.c index 7413cb35c5a9..be667236b8e6 100644 --- a/mm/damon/sysfs-schemes.c +++ b/mm/damon/sysfs-schemes.c @@ -1826,6 +1826,8 @@ static int damon_sysfs_before_damos_apply(struct damon_ctx *ctx, return 0; region = damon_sysfs_scheme_region_alloc(r); + if (!region) + return 0; list_add_tail(®ion->list, &sysfs_regions->regions_list); sysfs_regions->nr_regions++; if (kobject_init_and_add(®ion->kobj, -- cgit v1.2.3 From 24948e3b7b12e0031a6edb4f49bbb9fb2ad1e4e9 Mon Sep 17 00:00:00 2001 From: Roman Gushchin Date: Tue, 7 Nov 2023 09:18:02 -0800 Subject: mm: kmem: drop __GFP_NOFAIL when allocating objcg vectors Objcg vectors attached to slab pages to store slab object ownership information are allocated using gfp flags for the original slab allocation. Depending on slab page order and the size of slab objects, objcg vector can take several pages. If the original allocation was done with the __GFP_NOFAIL flag, it triggered a warning in the page allocation code. Indeed, order > 1 pages should not been allocated with the __GFP_NOFAIL flag. Fix this by simply dropping the __GFP_NOFAIL flag when allocating the objcg vector. It effectively allows to skip the accounting of a single slab object under a heavy memory pressure. An alternative would be to implement the mechanism to fallback to order-0 allocations for accounting metadata, which is also not perfect because it will increase performance penalty and memory footprint of the kernel memory accounting under memory pressure. Link: https://lkml.kernel.org/r/ZUp8ZFGxwmCx4ZFr@P9FQF9L96D.corp.robot.car Signed-off-by: Roman Gushchin Reported-by: Christoph Lameter Closes: https://lkml.kernel.org/r/6b42243e-f197-600a-5d22-56bd728a5ad8@gentwo.org Acked-by: Shakeel Butt Cc: Matthew Wilcox Cc: Signed-off-by: Andrew Morton --- mm/memcontrol.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/mm/memcontrol.c b/mm/memcontrol.c index 774bd6e21e27..1c1061df9cd1 100644 --- a/mm/memcontrol.c +++ b/mm/memcontrol.c @@ -2936,7 +2936,8 @@ void mem_cgroup_commit_charge(struct folio *folio, struct mem_cgroup *memcg) * Moreover, it should not come from DMA buffer and is not readily * reclaimable. So those GFP bits should be masked off. */ -#define OBJCGS_CLEAR_MASK (__GFP_DMA | __GFP_RECLAIMABLE | __GFP_ACCOUNT) +#define OBJCGS_CLEAR_MASK (__GFP_DMA | __GFP_RECLAIMABLE | \ + __GFP_ACCOUNT | __GFP_NOFAIL) /* * mod_objcg_mlstate() may be called with irq enabled, so -- cgit v1.2.3 From 13b2a4b22e98ff80b888a160a2acd92d81b05925 Mon Sep 17 00:00:00 2001 From: Hyeongtak Ji Date: Fri, 10 Nov 2023 14:37:09 +0900 Subject: mm/damon/core.c: avoid unintentional filtering out of schemes The function '__damos_filter_out()' causes DAMON to always filter out schemes whose filter type is anon or memcg if its matching value is set to false. This commit addresses the issue by ensuring that '__damos_filter_out()' no longer applies to filters whose type is 'anon' or 'memcg'. Link: https://lkml.kernel.org/r/1699594629-3816-1-git-send-email-hyeongtak.ji@gmail.com Fixes: ab9bda001b681 ("mm/damon/core: introduce address range type damos filter") Signed-off-by: Hyeongtak Ji Reviewed-by: SeongJae Park Cc: Signed-off-by: Andrew Morton --- mm/damon/core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/mm/damon/core.c b/mm/damon/core.c index 630077d95dc6..6262d55904e7 100644 --- a/mm/damon/core.c +++ b/mm/damon/core.c @@ -924,7 +924,7 @@ static bool __damos_filter_out(struct damon_ctx *ctx, struct damon_target *t, matched = true; break; default: - break; + return false; } return matched == filter->matching; -- cgit v1.2.3 From 5f74f820f6fc844b95f9e5e406e0a07d97510420 Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Mon, 13 Nov 2023 11:12:57 +0100 Subject: parisc: fix mmap_base calculation when stack grows upwards Matoro reported various userspace crashes on the parisc platform with kernel 6.6 and bisected it to commit 3033cd430768 ("parisc: Use generic mmap top-down layout and brk randomization"). That commit switched parisc to use the common infrastructure to calculate mmap_base, but missed that the mmap_base() function takes care for architectures where the stack grows downwards only. Fix the mmap_base() calculation to include the stack-grows-upwards case and thus fix the userspace crashes on parisc. Link: https://lkml.kernel.org/r/ZVH2qeS1bG7/1J/l@p100 Fixes: 3033cd430768 ("parisc: Use generic mmap top-down layout and brk randomization") Signed-off-by: Helge Deller Reported-by: matoro Tested-by: matoro Cc: [6.6+] Signed-off-by: Andrew Morton --- arch/parisc/Kconfig | 6 +++--- arch/parisc/include/asm/elf.h | 10 +--------- arch/parisc/include/asm/processor.h | 2 ++ arch/parisc/kernel/sys_parisc.c | 2 +- mm/util.c | 10 ++++++++++ 5 files changed, 17 insertions(+), 13 deletions(-) diff --git a/arch/parisc/Kconfig b/arch/parisc/Kconfig index fd69dfa0cdab..a7c9c0e69e5a 100644 --- a/arch/parisc/Kconfig +++ b/arch/parisc/Kconfig @@ -140,11 +140,11 @@ config ARCH_MMAP_RND_COMPAT_BITS_MIN default 8 config ARCH_MMAP_RND_BITS_MAX - default 24 if 64BIT - default 17 + default 18 if 64BIT + default 13 config ARCH_MMAP_RND_COMPAT_BITS_MAX - default 17 + default 13 # unless you want to implement ACPI on PA-RISC ... ;-) config PM diff --git a/arch/parisc/include/asm/elf.h b/arch/parisc/include/asm/elf.h index 140eaa97bf21..2d73d3c3cd37 100644 --- a/arch/parisc/include/asm/elf.h +++ b/arch/parisc/include/asm/elf.h @@ -349,15 +349,7 @@ struct pt_regs; /* forward declaration... */ #define ELF_HWCAP 0 -/* Masks for stack and mmap randomization */ -#define BRK_RND_MASK (is_32bit_task() ? 0x07ffUL : 0x3ffffUL) -#define MMAP_RND_MASK (is_32bit_task() ? 0x1fffUL : 0x3ffffUL) -#define STACK_RND_MASK MMAP_RND_MASK - -struct mm_struct; -extern unsigned long arch_randomize_brk(struct mm_struct *); -#define arch_randomize_brk arch_randomize_brk - +#define STACK_RND_MASK 0x7ff /* 8MB of VA */ #define ARCH_HAS_SETUP_ADDITIONAL_PAGES 1 struct linux_binprm; diff --git a/arch/parisc/include/asm/processor.h b/arch/parisc/include/asm/processor.h index c05d121cf5d0..982aca20f56f 100644 --- a/arch/parisc/include/asm/processor.h +++ b/arch/parisc/include/asm/processor.h @@ -47,6 +47,8 @@ #ifndef __ASSEMBLY__ +struct rlimit; +unsigned long mmap_upper_limit(struct rlimit *rlim_stack); unsigned long calc_max_stack_size(unsigned long stack_max); /* diff --git a/arch/parisc/kernel/sys_parisc.c b/arch/parisc/kernel/sys_parisc.c index ab896eff7a1d..98af719d5f85 100644 --- a/arch/parisc/kernel/sys_parisc.c +++ b/arch/parisc/kernel/sys_parisc.c @@ -77,7 +77,7 @@ unsigned long calc_max_stack_size(unsigned long stack_max) * indicating that "current" should be used instead of a passed-in * value from the exec bprm as done with arch_pick_mmap_layout(). */ -static unsigned long mmap_upper_limit(struct rlimit *rlim_stack) +unsigned long mmap_upper_limit(struct rlimit *rlim_stack) { unsigned long stack_base; diff --git a/mm/util.c b/mm/util.c index aa01f6ea5a75..744b4d7e3fae 100644 --- a/mm/util.c +++ b/mm/util.c @@ -414,6 +414,15 @@ static int mmap_is_legacy(struct rlimit *rlim_stack) static unsigned long mmap_base(unsigned long rnd, struct rlimit *rlim_stack) { +#ifdef CONFIG_STACK_GROWSUP + /* + * For an upwards growing stack the calculation is much simpler. + * Memory for the maximum stack size is reserved at the top of the + * task. mmap_base starts directly below the stack and grows + * downwards. + */ + return PAGE_ALIGN_DOWN(mmap_upper_limit(rlim_stack) - rnd); +#else unsigned long gap = rlim_stack->rlim_cur; unsigned long pad = stack_guard_gap; @@ -431,6 +440,7 @@ static unsigned long mmap_base(unsigned long rnd, struct rlimit *rlim_stack) gap = MAX_GAP; return PAGE_ALIGN(STACK_TOP - gap - rnd); +#endif } void arch_pick_mmap_layout(struct mm_struct *mm, struct rlimit *rlim_stack) -- cgit v1.2.3 From afccb0804fc74ac2f6737af6a139632606cb461d Mon Sep 17 00:00:00 2001 From: Ryan Roberts Date: Tue, 14 Nov 2023 15:49:45 +0000 Subject: mm: more ptep_get() conversion Commit c33c794828f2 ("mm: ptep_get() conversion") converted all (non-arch) call sites to use ptep_get() instead of doing a direct dereference of the pte. Full rationale can be found in that commit's log. Since then, three new call sites have snuck in, which directly dereference the pte, so let's fix those up. Unfortunately there is no reliable automated mechanism to catch these; I'm relying on a combination of Coccinelle (which throws up a lot of false positives) and some compiler magic to force a compiler error on dereference (While this approach finds dereferences, it also yields a non-booting kernel so can't be committed). Link: https://lkml.kernel.org/r/20231114154945.490401-1-ryan.roberts@arm.com Signed-off-by: Ryan Roberts Cc: Matthew Wilcox (Oracle) Signed-off-by: Andrew Morton --- mm/filemap.c | 2 +- mm/ksm.c | 2 +- mm/userfaultfd.c | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) diff --git a/mm/filemap.c b/mm/filemap.c index 9710f43a89ac..32eedf3afd45 100644 --- a/mm/filemap.c +++ b/mm/filemap.c @@ -3443,7 +3443,7 @@ static vm_fault_t filemap_map_folio_range(struct vm_fault *vmf, * handled in the specific fault path, and it'll prohibit the * fault-around logic. */ - if (!pte_none(vmf->pte[count])) + if (!pte_none(ptep_get(&vmf->pte[count]))) goto skip; count++; diff --git a/mm/ksm.c b/mm/ksm.c index 7efcc68ccc6e..6a831009b4cb 100644 --- a/mm/ksm.c +++ b/mm/ksm.c @@ -468,7 +468,7 @@ static int break_ksm_pmd_entry(pmd_t *pmd, unsigned long addr, unsigned long nex page = pfn_swap_entry_to_page(entry); } /* return 1 if the page is an normal ksm page or KSM-placed zero page */ - ret = (page && PageKsm(page)) || is_ksm_zero_pte(*pte); + ret = (page && PageKsm(page)) || is_ksm_zero_pte(ptent); pte_unmap_unlock(pte, ptl); return ret; } diff --git a/mm/userfaultfd.c b/mm/userfaultfd.c index 96d9eae5c7cc..0b6ca553bebe 100644 --- a/mm/userfaultfd.c +++ b/mm/userfaultfd.c @@ -312,7 +312,7 @@ static int mfill_atomic_pte_poison(pmd_t *dst_pmd, ret = -EEXIST; /* Refuse to overwrite any PTE, even a PTE marker (e.g. UFFD WP). */ - if (!pte_none(*dst_pte)) + if (!pte_none(ptep_get(dst_pte))) goto out_unlock; set_pte_at(dst_mm, dst_addr, dst_pte, _dst_pte); -- cgit v1.2.3 From df3aafe501853c92bc9e25b05dcb030fee072962 Mon Sep 17 00:00:00 2001 From: Itamar Gozlan Date: Tue, 14 Nov 2023 13:58:32 -0800 Subject: Revert "net/mlx5: DR, Supporting inline WQE when possible" This reverts commit 95c337cce0e11d06a715da73e6796ade9216637f. The revert is required due to the suspicion it cause some tests fail and will be moved to further investigation. Fixes: 95c337cce0e1 ("net/mlx5: DR, Supporting inline WQE when possible") Signed-off-by: Itamar Gozlan Signed-off-by: Saeed Mahameed Link: https://lore.kernel.org/r/20231114215846.5902-2-saeed@kernel.org Signed-off-by: Jakub Kicinski --- .../ethernet/mellanox/mlx5/core/steering/dr_send.c | 115 +++------------------ 1 file changed, 13 insertions(+), 102 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/steering/dr_send.c b/drivers/net/ethernet/mellanox/mlx5/core/steering/dr_send.c index 4e8527a724f5..6fa06ba2d346 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/steering/dr_send.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/steering/dr_send.c @@ -52,7 +52,6 @@ struct dr_qp_init_attr { u32 cqn; u32 pdn; u32 max_send_wr; - u32 max_send_sge; struct mlx5_uars_page *uar; u8 isolate_vl_tc:1; }; @@ -247,37 +246,6 @@ static int dr_poll_cq(struct mlx5dr_cq *dr_cq, int ne) return err == CQ_POLL_ERR ? err : npolled; } -static int dr_qp_get_args_update_send_wqe_size(struct dr_qp_init_attr *attr) -{ - return roundup_pow_of_two(sizeof(struct mlx5_wqe_ctrl_seg) + - sizeof(struct mlx5_wqe_flow_update_ctrl_seg) + - sizeof(struct mlx5_wqe_header_modify_argument_update_seg)); -} - -/* We calculate for specific RC QP with the required functionality */ -static int dr_qp_calc_rc_send_wqe(struct dr_qp_init_attr *attr) -{ - int update_arg_size; - int inl_size = 0; - int tot_size; - int size; - - update_arg_size = dr_qp_get_args_update_send_wqe_size(attr); - - size = sizeof(struct mlx5_wqe_ctrl_seg) + - sizeof(struct mlx5_wqe_raddr_seg); - inl_size = size + ALIGN(sizeof(struct mlx5_wqe_inline_seg) + - DR_STE_SIZE, 16); - - size += attr->max_send_sge * sizeof(struct mlx5_wqe_data_seg); - - size = max(size, update_arg_size); - - tot_size = max(size, inl_size); - - return ALIGN(tot_size, MLX5_SEND_WQE_BB); -} - static struct mlx5dr_qp *dr_create_rc_qp(struct mlx5_core_dev *mdev, struct dr_qp_init_attr *attr) { @@ -285,7 +253,6 @@ static struct mlx5dr_qp *dr_create_rc_qp(struct mlx5_core_dev *mdev, u32 temp_qpc[MLX5_ST_SZ_DW(qpc)] = {}; struct mlx5_wq_param wqp; struct mlx5dr_qp *dr_qp; - int wqe_size; int inlen; void *qpc; void *in; @@ -365,15 +332,6 @@ static struct mlx5dr_qp *dr_create_rc_qp(struct mlx5_core_dev *mdev, if (err) goto err_in; dr_qp->uar = attr->uar; - wqe_size = dr_qp_calc_rc_send_wqe(attr); - dr_qp->max_inline_data = min(wqe_size - - (sizeof(struct mlx5_wqe_ctrl_seg) + - sizeof(struct mlx5_wqe_raddr_seg) + - sizeof(struct mlx5_wqe_inline_seg)), - (2 * MLX5_SEND_WQE_BB - - (sizeof(struct mlx5_wqe_ctrl_seg) + - sizeof(struct mlx5_wqe_raddr_seg) + - sizeof(struct mlx5_wqe_inline_seg)))); return dr_qp; @@ -437,48 +395,8 @@ dr_rdma_handle_flow_access_arg_segments(struct mlx5_wqe_ctrl_seg *wq_ctrl, MLX5_SEND_WQE_DS; } -static int dr_set_data_inl_seg(struct mlx5dr_qp *dr_qp, - struct dr_data_seg *data_seg, void *wqe) -{ - int inline_header_size = sizeof(struct mlx5_wqe_ctrl_seg) + - sizeof(struct mlx5_wqe_raddr_seg) + - sizeof(struct mlx5_wqe_inline_seg); - struct mlx5_wqe_inline_seg *seg; - int left_space; - int inl = 0; - void *addr; - int len; - int idx; - - seg = wqe; - wqe += sizeof(*seg); - addr = (void *)(unsigned long)(data_seg->addr); - len = data_seg->length; - inl += len; - left_space = MLX5_SEND_WQE_BB - inline_header_size; - - if (likely(len > left_space)) { - memcpy(wqe, addr, left_space); - len -= left_space; - addr += left_space; - idx = (dr_qp->sq.pc + 1) & (dr_qp->sq.wqe_cnt - 1); - wqe = mlx5_wq_cyc_get_wqe(&dr_qp->wq.sq, idx); - } - - memcpy(wqe, addr, len); - - if (likely(inl)) { - seg->byte_count = cpu_to_be32(inl | MLX5_INLINE_SEG); - return DIV_ROUND_UP(inl + sizeof(seg->byte_count), - MLX5_SEND_WQE_DS); - } else { - return 0; - } -} - static void -dr_rdma_handle_icm_write_segments(struct mlx5dr_qp *dr_qp, - struct mlx5_wqe_ctrl_seg *wq_ctrl, +dr_rdma_handle_icm_write_segments(struct mlx5_wqe_ctrl_seg *wq_ctrl, u64 remote_addr, u32 rkey, struct dr_data_seg *data_seg, @@ -494,17 +412,15 @@ dr_rdma_handle_icm_write_segments(struct mlx5dr_qp *dr_qp, wq_raddr->reserved = 0; wq_dseg = (void *)(wq_raddr + 1); - /* WQE ctrl segment + WQE remote addr segment */ - *size = (sizeof(*wq_ctrl) + sizeof(*wq_raddr)) / MLX5_SEND_WQE_DS; - if (data_seg->send_flags & IB_SEND_INLINE) { - *size += dr_set_data_inl_seg(dr_qp, data_seg, wq_dseg); - } else { - wq_dseg->byte_count = cpu_to_be32(data_seg->length); - wq_dseg->lkey = cpu_to_be32(data_seg->lkey); - wq_dseg->addr = cpu_to_be64(data_seg->addr); - *size += sizeof(*wq_dseg) / MLX5_SEND_WQE_DS; /* WQE data segment */ - } + wq_dseg->byte_count = cpu_to_be32(data_seg->length); + wq_dseg->lkey = cpu_to_be32(data_seg->lkey); + wq_dseg->addr = cpu_to_be64(data_seg->addr); + + *size = (sizeof(*wq_ctrl) + /* WQE ctrl segment */ + sizeof(*wq_dseg) + /* WQE data segment */ + sizeof(*wq_raddr)) / /* WQE remote addr segment */ + MLX5_SEND_WQE_DS; } static void dr_set_ctrl_seg(struct mlx5_wqe_ctrl_seg *wq_ctrl, @@ -535,7 +451,7 @@ static void dr_rdma_segments(struct mlx5dr_qp *dr_qp, u64 remote_addr, switch (opcode) { case MLX5_OPCODE_RDMA_READ: case MLX5_OPCODE_RDMA_WRITE: - dr_rdma_handle_icm_write_segments(dr_qp, wq_ctrl, remote_addr, + dr_rdma_handle_icm_write_segments(wq_ctrl, remote_addr, rkey, data_seg, &size); break; case MLX5_OPCODE_FLOW_TBL_ACCESS: @@ -656,7 +572,7 @@ static void dr_fill_write_args_segs(struct mlx5dr_send_ring *send_ring, if (send_ring->pending_wqe % send_ring->signal_th == 0) send_info->write.send_flags |= IB_SEND_SIGNALED; else - send_info->write.send_flags &= ~IB_SEND_SIGNALED; + send_info->write.send_flags = 0; } static void dr_fill_write_icm_segs(struct mlx5dr_domain *dmn, @@ -680,13 +596,9 @@ static void dr_fill_write_icm_segs(struct mlx5dr_domain *dmn, } send_ring->pending_wqe++; - if (!send_info->write.lkey) - send_info->write.send_flags |= IB_SEND_INLINE; if (send_ring->pending_wqe % send_ring->signal_th == 0) send_info->write.send_flags |= IB_SEND_SIGNALED; - else - send_info->write.send_flags &= ~IB_SEND_SIGNALED; send_ring->pending_wqe++; send_info->read.length = send_info->write.length; @@ -696,9 +608,9 @@ static void dr_fill_write_icm_segs(struct mlx5dr_domain *dmn, send_info->read.lkey = send_ring->sync_mr->mkey; if (send_ring->pending_wqe % send_ring->signal_th == 0) - send_info->read.send_flags |= IB_SEND_SIGNALED; + send_info->read.send_flags = IB_SEND_SIGNALED; else - send_info->read.send_flags &= ~IB_SEND_SIGNALED; + send_info->read.send_flags = 0; } static void dr_fill_data_segs(struct mlx5dr_domain *dmn, @@ -1345,7 +1257,6 @@ int mlx5dr_send_ring_alloc(struct mlx5dr_domain *dmn) dmn->send_ring->cq->qp = dmn->send_ring->qp; dmn->info.max_send_wr = QUEUE_SIZE; - init_attr.max_send_sge = 1; dmn->info.max_inline_size = min(dmn->send_ring->qp->max_inline_data, DR_STE_SIZE); -- cgit v1.2.3 From 7d2f74d1d4385a5bcf90618537f16a45121c30ae Mon Sep 17 00:00:00 2001 From: Maher Sanalla Date: Tue, 14 Nov 2023 13:58:33 -0800 Subject: net/mlx5: Free used cpus mask when an IRQ is released Each EQ table maintains a cpumask of the already used CPUs that are mapped to IRQs to ensure that each IRQ gets mapped to a unique CPU. However, on IRQ release, the said cpumask is not updated by clearing the CPU from the mask to allow future IRQ request, causing the following error when a SF is reloaded after it has utilized all CPUs for its IRQs: mlx5_irq_affinity_request:135:(pid 306010): Didn't find a matching IRQ. err = -28 Thus, when releasing an IRQ, clear its mapped CPU from the used CPUs mask, to prevent the case described above. While at it, move the used cpumask update to the EQ layer as it is more fitting and preserves symmetricity of the IRQ request/release API. Fixes: a1772de78d73 ("net/mlx5: Refactor completion IRQ request/release API") Signed-off-by: Maher Sanalla Reviewed-by: Tariq Toukan Reviewed-by: Shay Drory Reviewed-by: Moshe Shemesh Signed-off-by: Saeed Mahameed Link: https://lore.kernel.org/r/20231114215846.5902-3-saeed@kernel.org Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/mellanox/mlx5/core/eq.c | 25 +++++++++---- .../net/ethernet/mellanox/mlx5/core/irq_affinity.c | 42 ---------------------- 2 files changed, 19 insertions(+), 48 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/eq.c b/drivers/net/ethernet/mellanox/mlx5/core/eq.c index ea0405e0a43f..40a6cb052a2d 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/eq.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/eq.c @@ -885,11 +885,14 @@ static void comp_irq_release_sf(struct mlx5_core_dev *dev, u16 vecidx) { struct mlx5_eq_table *table = dev->priv.eq_table; struct mlx5_irq *irq; + int cpu; irq = xa_load(&table->comp_irqs, vecidx); if (!irq) return; + cpu = cpumask_first(mlx5_irq_get_affinity_mask(irq)); + cpumask_clear_cpu(cpu, &table->used_cpus); xa_erase(&table->comp_irqs, vecidx); mlx5_irq_affinity_irq_release(dev, irq); } @@ -897,16 +900,26 @@ static void comp_irq_release_sf(struct mlx5_core_dev *dev, u16 vecidx) static int comp_irq_request_sf(struct mlx5_core_dev *dev, u16 vecidx) { struct mlx5_eq_table *table = dev->priv.eq_table; + struct mlx5_irq_pool *pool = mlx5_irq_pool_get(dev); + struct irq_affinity_desc af_desc = {}; struct mlx5_irq *irq; - irq = mlx5_irq_affinity_irq_request_auto(dev, &table->used_cpus, vecidx); - if (IS_ERR(irq)) { - /* In case SF irq pool does not exist, fallback to the PF irqs*/ - if (PTR_ERR(irq) == -ENOENT) - return comp_irq_request_pci(dev, vecidx); + /* In case SF irq pool does not exist, fallback to the PF irqs*/ + if (!mlx5_irq_pool_is_sf_pool(pool)) + return comp_irq_request_pci(dev, vecidx); + af_desc.is_managed = 1; + cpumask_copy(&af_desc.mask, cpu_online_mask); + cpumask_andnot(&af_desc.mask, &af_desc.mask, &table->used_cpus); + irq = mlx5_irq_affinity_request(pool, &af_desc); + if (IS_ERR(irq)) return PTR_ERR(irq); - } + + cpumask_or(&table->used_cpus, &table->used_cpus, mlx5_irq_get_affinity_mask(irq)); + mlx5_core_dbg(pool->dev, "IRQ %u mapped to cpu %*pbl, %u EQs on this irq\n", + pci_irq_vector(dev->pdev, mlx5_irq_get_index(irq)), + cpumask_pr_args(mlx5_irq_get_affinity_mask(irq)), + mlx5_irq_read_locked(irq) / MLX5_EQ_REFS_PER_IRQ); return xa_err(xa_store(&table->comp_irqs, vecidx, irq, GFP_KERNEL)); } diff --git a/drivers/net/ethernet/mellanox/mlx5/core/irq_affinity.c b/drivers/net/ethernet/mellanox/mlx5/core/irq_affinity.c index 047d5fed5f89..612e666ec263 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/irq_affinity.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/irq_affinity.c @@ -168,45 +168,3 @@ void mlx5_irq_affinity_irq_release(struct mlx5_core_dev *dev, struct mlx5_irq *i if (pool->irqs_per_cpu) cpu_put(pool, cpu); } - -/** - * mlx5_irq_affinity_irq_request_auto - request one IRQ for mlx5 device. - * @dev: mlx5 device that is requesting the IRQ. - * @used_cpus: cpumask of bounded cpus by the device - * @vecidx: vector index to request an IRQ for. - * - * Each IRQ is bounded to at most 1 CPU. - * This function is requesting an IRQ according to the default assignment. - * The default assignment policy is: - * - request the least loaded IRQ which is not bound to any - * CPU of the previous IRQs requested. - * - * On success, this function updates used_cpus mask and returns an irq pointer. - * In case of an error, an appropriate error pointer is returned. - */ -struct mlx5_irq *mlx5_irq_affinity_irq_request_auto(struct mlx5_core_dev *dev, - struct cpumask *used_cpus, u16 vecidx) -{ - struct mlx5_irq_pool *pool = mlx5_irq_pool_get(dev); - struct irq_affinity_desc af_desc = {}; - struct mlx5_irq *irq; - - if (!mlx5_irq_pool_is_sf_pool(pool)) - return ERR_PTR(-ENOENT); - - af_desc.is_managed = 1; - cpumask_copy(&af_desc.mask, cpu_online_mask); - cpumask_andnot(&af_desc.mask, &af_desc.mask, used_cpus); - irq = mlx5_irq_affinity_request(pool, &af_desc); - - if (IS_ERR(irq)) - return irq; - - cpumask_or(used_cpus, used_cpus, mlx5_irq_get_affinity_mask(irq)); - mlx5_core_dbg(pool->dev, "IRQ %u mapped to cpu %*pbl, %u EQs on this irq\n", - pci_irq_vector(dev->pdev, mlx5_irq_get_index(irq)), - cpumask_pr_args(mlx5_irq_get_affinity_mask(irq)), - mlx5_irq_read_locked(irq) / MLX5_EQ_REFS_PER_IRQ); - - return irq; -} -- cgit v1.2.3 From ad4d82c3eacdd500a246af736e6e01d96484e35e Mon Sep 17 00:00:00 2001 From: Erez Shitrit Date: Tue, 14 Nov 2023 13:58:34 -0800 Subject: net/mlx5: DR, Allow old devices to use multi destination FTE The current check isn't aware of old devices that don't have the relevant FW capability. This patch allows multi destination FTE in old cards, as it was before this check. Fixes: f6f46e7173cb ("net/mlx5: DR, Add check for multi destination FTE") Signed-off-by: Erez Shitrit Reviewed-by: Yevgeny Kliteynik Signed-off-by: Saeed Mahameed Link: https://lore.kernel.org/r/20231114215846.5902-4-saeed@kernel.org Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/mellanox/mlx5/core/steering/dr_action.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/steering/dr_action.c b/drivers/net/ethernet/mellanox/mlx5/core/steering/dr_action.c index 6ea88a581804..e3ec559369fa 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/steering/dr_action.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/steering/dr_action.c @@ -57,7 +57,8 @@ static const char *dr_action_id_to_str(enum mlx5dr_action_type action_id) static bool mlx5dr_action_supp_fwd_fdb_multi_ft(struct mlx5_core_dev *dev) { - return (MLX5_CAP_ESW_FLOWTABLE(dev, fdb_multi_path_any_table_limit_regc) || + return (MLX5_CAP_GEN(dev, steering_format_version) < MLX5_STEERING_FORMAT_CONNECTX_6DX || + MLX5_CAP_ESW_FLOWTABLE(dev, fdb_multi_path_any_table_limit_regc) || MLX5_CAP_ESW_FLOWTABLE(dev, fdb_multi_path_any_table)); } -- cgit v1.2.3 From fd64fd13c49a53012ce9170449dcd9eb71c11284 Mon Sep 17 00:00:00 2001 From: Rahul Rameshbabu Date: Tue, 14 Nov 2023 13:58:35 -0800 Subject: net/mlx5: Decouple PHC .adjtime and .adjphase implementations When running a phase adjustment operation, the free running clock should not be modified at all. The phase control keyword is intended to trigger an internal servo on the device that will converge to the provided delta. A free running counter cannot implement phase adjustment. Fixes: 8e11a68e2e8a ("net/mlx5: Add adjphase function to support hardware-only offset control") Signed-off-by: Rahul Rameshbabu Reviewed-by: Tariq Toukan Signed-off-by: Saeed Mahameed Link: https://lore.kernel.org/r/20231114215846.5902-5-saeed@kernel.org Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/mellanox/mlx5/core/lib/clock.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/lib/clock.c b/drivers/net/ethernet/mellanox/mlx5/core/lib/clock.c index aa29f09e8356..0c83ef174275 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/lib/clock.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/lib/clock.c @@ -384,7 +384,12 @@ static int mlx5_ptp_adjtime(struct ptp_clock_info *ptp, s64 delta) static int mlx5_ptp_adjphase(struct ptp_clock_info *ptp, s32 delta) { - return mlx5_ptp_adjtime(ptp, delta); + struct mlx5_clock *clock = container_of(ptp, struct mlx5_clock, ptp_info); + struct mlx5_core_dev *mdev; + + mdev = container_of(clock, struct mlx5_core_dev, clock); + + return mlx5_ptp_adjtime_real_time(mdev, delta); } static int mlx5_ptp_freq_adj_real_time(struct mlx5_core_dev *mdev, long scaled_ppm) -- cgit v1.2.3 From 6f9b1a0731662648949a1c0587f6acb3b7f8acf1 Mon Sep 17 00:00:00 2001 From: Dust Li Date: Tue, 14 Nov 2023 13:58:36 -0800 Subject: net/mlx5e: fix double free of encap_header When mlx5_packet_reformat_alloc() fails, the encap_header allocated in mlx5e_tc_tun_create_header_ipv4{6} will be released within it. However, e->encap_header is already set to the previously freed encap_header before mlx5_packet_reformat_alloc(). As a result, the later mlx5e_encap_put() will free e->encap_header again, causing a double free issue. mlx5e_encap_put() --> mlx5e_encap_dealloc() --> kfree(e->encap_header) This happens when cmd: MLX5_CMD_OP_ALLOC_PACKET_REFORMAT_CONTEXT fail. This patch fix it by not setting e->encap_header until mlx5_packet_reformat_alloc() success. Fixes: d589e785baf5e ("net/mlx5e: Allow concurrent creation of encap entries") Reported-by: Cruz Zhao Reported-by: Tianchen Ding Signed-off-by: Dust Li Reviewed-by: Wojciech Drewek Signed-off-by: Saeed Mahameed Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun.c | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun.c b/drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun.c index 00a04fdd756f..8bca696b6658 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun.c @@ -300,9 +300,6 @@ int mlx5e_tc_tun_create_header_ipv4(struct mlx5e_priv *priv, if (err) goto destroy_neigh_entry; - e->encap_size = ipv4_encap_size; - e->encap_header = encap_header; - if (!(nud_state & NUD_VALID)) { neigh_event_send(attr.n, NULL); /* the encap entry will be made valid on neigh update event @@ -322,6 +319,8 @@ int mlx5e_tc_tun_create_header_ipv4(struct mlx5e_priv *priv, goto destroy_neigh_entry; } + e->encap_size = ipv4_encap_size; + e->encap_header = encap_header; e->flags |= MLX5_ENCAP_ENTRY_VALID; mlx5e_rep_queue_neigh_stats_work(netdev_priv(attr.out_dev)); mlx5e_route_lookup_ipv4_put(&attr); @@ -568,9 +567,6 @@ int mlx5e_tc_tun_create_header_ipv6(struct mlx5e_priv *priv, if (err) goto destroy_neigh_entry; - e->encap_size = ipv6_encap_size; - e->encap_header = encap_header; - if (!(nud_state & NUD_VALID)) { neigh_event_send(attr.n, NULL); /* the encap entry will be made valid on neigh update event @@ -590,6 +586,8 @@ int mlx5e_tc_tun_create_header_ipv6(struct mlx5e_priv *priv, goto destroy_neigh_entry; } + e->encap_size = ipv6_encap_size; + e->encap_header = encap_header; e->flags |= MLX5_ENCAP_ENTRY_VALID; mlx5e_rep_queue_neigh_stats_work(netdev_priv(attr.out_dev)); mlx5e_route_lookup_ipv6_put(&attr); -- cgit v1.2.3 From 3a4aa3cb83563df942be49d145ee3b7ddf17d6bb Mon Sep 17 00:00:00 2001 From: Gavin Li Date: Tue, 14 Nov 2023 13:58:37 -0800 Subject: net/mlx5e: fix double free of encap_header in update funcs Follow up to the previous patch to fix the same issue for mlx5e_tc_tun_update_header_ipv4{6} when mlx5_packet_reformat_alloc() fails. When mlx5_packet_reformat_alloc() fails, the encap_header allocated in mlx5e_tc_tun_update_header_ipv4{6} will be released within it. However, e->encap_header is already set to the previously freed encap_header before mlx5_packet_reformat_alloc(). As a result, the later mlx5e_encap_put() will free e->encap_header again, causing a double free issue. mlx5e_encap_put() --> mlx5e_encap_dealloc() --> kfree(e->encap_header) This patch fix it by not setting e->encap_header until mlx5_packet_reformat_alloc() success. Fixes: a54e20b4fcae ("net/mlx5e: Add basic TC tunnel set action for SRIOV offloads") Signed-off-by: Gavin Li Signed-off-by: Saeed Mahameed Link: https://lore.kernel.org/r/20231114215846.5902-7-saeed@kernel.org Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun.c | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun.c b/drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun.c index 8bca696b6658..668da5c70e63 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun.c @@ -403,16 +403,12 @@ int mlx5e_tc_tun_update_header_ipv4(struct mlx5e_priv *priv, if (err) goto free_encap; - e->encap_size = ipv4_encap_size; - kfree(e->encap_header); - e->encap_header = encap_header; - if (!(nud_state & NUD_VALID)) { neigh_event_send(attr.n, NULL); /* the encap entry will be made valid on neigh update event * and not used before that. */ - goto release_neigh; + goto free_encap; } memset(&reformat_params, 0, sizeof(reformat_params)); @@ -426,6 +422,10 @@ int mlx5e_tc_tun_update_header_ipv4(struct mlx5e_priv *priv, goto free_encap; } + e->encap_size = ipv4_encap_size; + kfree(e->encap_header); + e->encap_header = encap_header; + e->flags |= MLX5_ENCAP_ENTRY_VALID; mlx5e_rep_queue_neigh_stats_work(netdev_priv(attr.out_dev)); mlx5e_route_lookup_ipv4_put(&attr); @@ -669,16 +669,12 @@ int mlx5e_tc_tun_update_header_ipv6(struct mlx5e_priv *priv, if (err) goto free_encap; - e->encap_size = ipv6_encap_size; - kfree(e->encap_header); - e->encap_header = encap_header; - if (!(nud_state & NUD_VALID)) { neigh_event_send(attr.n, NULL); /* the encap entry will be made valid on neigh update event * and not used before that. */ - goto release_neigh; + goto free_encap; } memset(&reformat_params, 0, sizeof(reformat_params)); @@ -692,6 +688,10 @@ int mlx5e_tc_tun_update_header_ipv6(struct mlx5e_priv *priv, goto free_encap; } + e->encap_size = ipv6_encap_size; + kfree(e->encap_header); + e->encap_header = encap_header; + e->flags |= MLX5_ENCAP_ENTRY_VALID; mlx5e_rep_queue_neigh_stats_work(netdev_priv(attr.out_dev)); mlx5e_route_lookup_ipv6_put(&attr); -- cgit v1.2.3 From 0c101a23ca7eaf00eef1328eefb04b3a93401cc8 Mon Sep 17 00:00:00 2001 From: Vlad Buslov Date: Tue, 14 Nov 2023 13:58:38 -0800 Subject: net/mlx5e: Fix pedit endianness Referenced commit addressed endianness issue in mlx5 pedit implementation in ad hoc manner instead of systematically treating integer values according to their types which left pedit fields of sizes not equal to 4 and where the bytes being modified are not least significant ones broken on big endian machines since wrong bits will be consumed during parsing which leads to following example error when applying pedit to source and destination MAC addresses: [Wed Oct 18 12:52:42 2023] mlx5_core 0001:00:00.1 p1v3_r: attempt to offload an unsupported field (cmd 0) [Wed Oct 18 12:52:42 2023] mask: 00000000330c5b68: 00 00 00 00 ff ff 00 00 00 00 ff ff 00 00 00 00 ................ [Wed Oct 18 12:52:42 2023] mask: 0000000017d22fd9: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ [Wed Oct 18 12:52:42 2023] mask: 000000008186d717: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ [Wed Oct 18 12:52:42 2023] mask: 0000000029eb6149: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ [Wed Oct 18 12:52:42 2023] mask: 000000007ed103e4: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ [Wed Oct 18 12:52:42 2023] mask: 00000000db8101a6: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ [Wed Oct 18 12:52:42 2023] mask: 00000000ec3c08a9: 00 00 00 00 00 00 00 00 00 00 00 00 ............ Treat masks and values of pedit and filter match as network byte order, refactor pointers to them to void pointers instead of confusing u32 pointers and only cast to pointer-to-integer when reading a value from them. Treat pedit mlx5_fields->field_mask as host byte order according to its type u32, change the constants in fields array accordingly. Fixes: 82198d8bcdef ("net/mlx5e: Fix endianness when calculating pedit mask first bit") Signed-off-by: Vlad Buslov Reviewed-by: Gal Pressman Signed-off-by: Saeed Mahameed Link: https://lore.kernel.org/r/20231114215846.5902-8-saeed@kernel.org Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/mellanox/mlx5/core/en_tc.c | 60 +++++++++++++------------ 1 file changed, 32 insertions(+), 28 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c b/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c index 9a5a5c2c7da9..7ca9e5b86778 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c @@ -3147,7 +3147,7 @@ static struct mlx5_fields fields[] = { OFFLOAD(DIPV6_31_0, 32, U32_MAX, ip6.daddr.s6_addr32[3], 0, dst_ipv4_dst_ipv6.ipv6_layout.ipv6[12]), OFFLOAD(IPV6_HOPLIMIT, 8, U8_MAX, ip6.hop_limit, 0, ttl_hoplimit), - OFFLOAD(IP_DSCP, 16, 0xc00f, ip6, 0, ip_dscp), + OFFLOAD(IP_DSCP, 16, 0x0fc0, ip6, 0, ip_dscp), OFFLOAD(TCP_SPORT, 16, U16_MAX, tcp.source, 0, tcp_sport), OFFLOAD(TCP_DPORT, 16, U16_MAX, tcp.dest, 0, tcp_dport), @@ -3158,21 +3158,31 @@ static struct mlx5_fields fields[] = { OFFLOAD(UDP_DPORT, 16, U16_MAX, udp.dest, 0, udp_dport), }; -static unsigned long mask_to_le(unsigned long mask, int size) +static u32 mask_field_get(void *mask, struct mlx5_fields *f) { - __be32 mask_be32; - __be16 mask_be16; - - if (size == 32) { - mask_be32 = (__force __be32)(mask); - mask = (__force unsigned long)cpu_to_le32(be32_to_cpu(mask_be32)); - } else if (size == 16) { - mask_be32 = (__force __be32)(mask); - mask_be16 = *(__be16 *)&mask_be32; - mask = (__force unsigned long)cpu_to_le16(be16_to_cpu(mask_be16)); + switch (f->field_bsize) { + case 32: + return be32_to_cpu(*(__be32 *)mask) & f->field_mask; + case 16: + return be16_to_cpu(*(__be16 *)mask) & (u16)f->field_mask; + default: + return *(u8 *)mask & (u8)f->field_mask; } +} - return mask; +static void mask_field_clear(void *mask, struct mlx5_fields *f) +{ + switch (f->field_bsize) { + case 32: + *(__be32 *)mask &= ~cpu_to_be32(f->field_mask); + break; + case 16: + *(__be16 *)mask &= ~cpu_to_be16((u16)f->field_mask); + break; + default: + *(u8 *)mask &= ~(u8)f->field_mask; + break; + } } static int offload_pedit_fields(struct mlx5e_priv *priv, @@ -3184,11 +3194,12 @@ static int offload_pedit_fields(struct mlx5e_priv *priv, struct pedit_headers *set_masks, *add_masks, *set_vals, *add_vals; struct pedit_headers_action *hdrs = parse_attr->hdrs; void *headers_c, *headers_v, *action, *vals_p; - u32 *s_masks_p, *a_masks_p, s_mask, a_mask; struct mlx5e_tc_mod_hdr_acts *mod_acts; - unsigned long mask, field_mask; + void *s_masks_p, *a_masks_p; int i, first, last, next_z; struct mlx5_fields *f; + unsigned long mask; + u32 s_mask, a_mask; u8 cmd; mod_acts = &parse_attr->mod_hdr_acts; @@ -3204,15 +3215,11 @@ static int offload_pedit_fields(struct mlx5e_priv *priv, bool skip; f = &fields[i]; - /* avoid seeing bits set from previous iterations */ - s_mask = 0; - a_mask = 0; - s_masks_p = (void *)set_masks + f->offset; a_masks_p = (void *)add_masks + f->offset; - s_mask = *s_masks_p & f->field_mask; - a_mask = *a_masks_p & f->field_mask; + s_mask = mask_field_get(s_masks_p, f); + a_mask = mask_field_get(a_masks_p, f); if (!s_mask && !a_mask) /* nothing to offload here */ continue; @@ -3239,22 +3246,20 @@ static int offload_pedit_fields(struct mlx5e_priv *priv, match_mask, f->field_bsize)) skip = true; /* clear to denote we consumed this field */ - *s_masks_p &= ~f->field_mask; + mask_field_clear(s_masks_p, f); } else { cmd = MLX5_ACTION_TYPE_ADD; mask = a_mask; vals_p = (void *)add_vals + f->offset; /* add 0 is no change */ - if ((*(u32 *)vals_p & f->field_mask) == 0) + if (!mask_field_get(vals_p, f)) skip = true; /* clear to denote we consumed this field */ - *a_masks_p &= ~f->field_mask; + mask_field_clear(a_masks_p, f); } if (skip) continue; - mask = mask_to_le(mask, f->field_bsize); - first = find_first_bit(&mask, f->field_bsize); next_z = find_next_zero_bit(&mask, f->field_bsize, first); last = find_last_bit(&mask, f->field_bsize); @@ -3281,10 +3286,9 @@ static int offload_pedit_fields(struct mlx5e_priv *priv, MLX5_SET(set_action_in, action, field, f->field); if (cmd == MLX5_ACTION_TYPE_SET) { + unsigned long field_mask = f->field_mask; int start; - field_mask = mask_to_le(f->field_mask, f->field_bsize); - /* if field is bit sized it can start not from first bit */ start = find_first_bit(&field_mask, f->field_bsize); -- cgit v1.2.3 From bdf788cf224f61c20a01c58c00685d394d57887f Mon Sep 17 00:00:00 2001 From: Jianbo Liu Date: Tue, 14 Nov 2023 13:58:39 -0800 Subject: net/mlx5e: Don't modify the peer sent-to-vport rules for IPSec offload As IPSec packet offload in switchdev mode is not supported with LAG, it's unnecessary to modify those sent-to-vport rules to the peer eswitch. Fixes: c6c2bf5db4ea ("net/mlx5e: Support IPsec packet offload for TX in switchdev mode") Signed-off-by: Jianbo Liu Reviewed-by: Leon Romanovsky Reviewed-by: Roi Dayan Signed-off-by: Saeed Mahameed Link: https://lore.kernel.org/r/20231114215846.5902-9-saeed@kernel.org Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c b/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c index b296ac52a439..88236e75fd90 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c @@ -984,7 +984,8 @@ mlx5_eswitch_add_send_to_vport_rule(struct mlx5_eswitch *on_esw, dest.vport.flags |= MLX5_FLOW_DEST_VPORT_VHCA_ID; flow_act.action = MLX5_FLOW_CONTEXT_ACTION_FWD_DEST; - if (rep->vport == MLX5_VPORT_UPLINK && on_esw->offloads.ft_ipsec_tx_pol) { + if (rep->vport == MLX5_VPORT_UPLINK && + on_esw == from_esw && on_esw->offloads.ft_ipsec_tx_pol) { dest.ft = on_esw->offloads.ft_ipsec_tx_pol; flow_act.flags = FLOW_ACT_IGNORE_FLOW_LEVEL; dest.type = MLX5_FLOW_DESTINATION_TYPE_FLOW_TABLE; -- cgit v1.2.3 From 64f14d16eef1f939000f2617b50c7c996b5117d4 Mon Sep 17 00:00:00 2001 From: Rahul Rameshbabu Date: Tue, 14 Nov 2023 13:58:40 -0800 Subject: net/mlx5e: Avoid referencing skb after free-ing in drop path of mlx5e_sq_xmit_wqe When SQ is a port timestamping SQ for PTP, do not access tx flags of skb after free-ing the skb. Free the skb only after all references that depend on it have been handled in the dropped WQE path. Fixes: 3178308ad4ca ("net/mlx5e: Make tx_port_ts logic resilient to out-of-order CQEs") Signed-off-by: Rahul Rameshbabu Reviewed-by: Tariq Toukan Signed-off-by: Saeed Mahameed Link: https://lore.kernel.org/r/20231114215846.5902-10-saeed@kernel.org Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/mellanox/mlx5/core/en_tx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_tx.c b/drivers/net/ethernet/mellanox/mlx5/core/en_tx.c index d41435c22ce5..19f2c25b05a0 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_tx.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_tx.c @@ -494,10 +494,10 @@ mlx5e_sq_xmit_wqe(struct mlx5e_txqsq *sq, struct sk_buff *skb, err_drop: stats->dropped++; - dev_kfree_skb_any(skb); if (unlikely(sq->ptpsq && (skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP))) mlx5e_ptp_metadata_fifo_push(&sq->ptpsq->metadata_freelist, be32_to_cpu(eseg->flow_table_metadata)); + dev_kfree_skb_any(skb); mlx5e_tx_flush(sq); } -- cgit v1.2.3 From 7e3f3ba97e6cc6fce5bf62df2ca06c8e59040167 Mon Sep 17 00:00:00 2001 From: Rahul Rameshbabu Date: Tue, 14 Nov 2023 13:58:41 -0800 Subject: net/mlx5e: Track xmit submission to PTP WQ after populating metadata map Ensure the skb is available in metadata mapping to skbs before tracking the metadata index for detecting undelivered CQEs. If the metadata index is put in the tracking list before putting the skb in the map, the metadata index might be used for detecting undelivered CQEs before the relevant skb is available in the map, which can lead to a null-ptr-deref. Log: general protection fault, probably for non-canonical address 0xdffffc0000000005: 0000 [#1] SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000028-0x000000000000002f] CPU: 0 PID: 1243 Comm: kworker/0:2 Not tainted 6.6.0-rc4+ #108 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 Workqueue: events mlx5e_rx_dim_work [mlx5_core] RIP: 0010:mlx5e_ptp_napi_poll+0x9a4/0x2290 [mlx5_core] Code: 8c 24 38 cc ff ff 4c 8d 3c c1 4c 89 f9 48 c1 e9 03 42 80 3c 31 00 0f 85 97 0f 00 00 4d 8b 3f 49 8d 7f 28 48 89 f9 48 c1 e9 03 <42> 80 3c 31 00 0f 85 8b 0f 00 00 49 8b 47 28 48 85 c0 0f 84 05 07 RSP: 0018:ffff8884d3c09c88 EFLAGS: 00010206 RAX: 0000000000000069 RBX: ffff8881160349d8 RCX: 0000000000000005 RDX: ffffed10218f48cf RSI: 0000000000000004 RDI: 0000000000000028 RBP: ffff888122707700 R08: 0000000000000001 R09: ffffed109a781383 R10: 0000000000000003 R11: 0000000000000003 R12: ffff88810c7a7a40 R13: ffff888122707700 R14: dffffc0000000000 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff8884d3c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f4f878dd6e0 CR3: 000000014d108002 CR4: 0000000000370eb0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: ? die_addr+0x3c/0xa0 ? exc_general_protection+0x144/0x210 ? asm_exc_general_protection+0x22/0x30 ? mlx5e_ptp_napi_poll+0x9a4/0x2290 [mlx5_core] ? mlx5e_ptp_napi_poll+0x8f6/0x2290 [mlx5_core] __napi_poll.constprop.0+0xa4/0x580 net_rx_action+0x460/0xb80 ? _raw_spin_unlock_irqrestore+0x32/0x60 ? __napi_poll.constprop.0+0x580/0x580 ? tasklet_action_common.isra.0+0x2ef/0x760 __do_softirq+0x26c/0x827 irq_exit_rcu+0xc2/0x100 common_interrupt+0x7f/0xa0 asm_common_interrupt+0x22/0x40 RIP: 0010:__kmem_cache_alloc_node+0xb/0x330 Code: 41 5d 41 5e 41 5f c3 8b 44 24 14 8b 4c 24 10 09 c8 eb d5 e8 b7 43 ca 01 0f 1f 80 00 00 00 00 0f 1f 44 00 00 55 48 89 e5 41 57 <41> 56 41 89 d6 41 55 41 89 f5 41 54 49 89 fc 53 48 83 e4 f0 48 83 RSP: 0018:ffff88812c4079c0 EFLAGS: 00000246 RAX: 1ffffffff083c7fe RBX: ffff888100042dc0 RCX: 0000000000000218 RDX: 00000000ffffffff RSI: 0000000000000dc0 RDI: ffff888100042dc0 RBP: ffff88812c4079c8 R08: ffffffffa0289f96 R09: ffffed1025880ea9 R10: ffff888138839f80 R11: 0000000000000002 R12: 0000000000000dc0 R13: 0000000000000100 R14: 000000000000008c R15: ffff8881271fc450 ? cmd_exec+0x796/0x2200 [mlx5_core] kmalloc_trace+0x26/0xc0 cmd_exec+0x796/0x2200 [mlx5_core] mlx5_cmd_do+0x22/0xc0 [mlx5_core] mlx5_cmd_exec+0x17/0x30 [mlx5_core] mlx5_core_modify_cq_moderation+0x139/0x1b0 [mlx5_core] ? mlx5_add_cq_to_tasklet+0x280/0x280 [mlx5_core] ? lockdep_set_lock_cmp_fn+0x190/0x190 ? process_one_work+0x659/0x1220 mlx5e_rx_dim_work+0x9d/0x100 [mlx5_core] process_one_work+0x730/0x1220 ? lockdep_hardirqs_on_prepare+0x400/0x400 ? max_active_store+0xf0/0xf0 ? assign_work+0x168/0x240 worker_thread+0x70f/0x12d0 ? __kthread_parkme+0xd1/0x1d0 ? process_one_work+0x1220/0x1220 kthread+0x2d9/0x3b0 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x2d/0x70 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork_asm+0x11/0x20 Modules linked in: xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xt_addrtype iptable_nat nf_nat br_netfilter rpcsec_gss_krb5 auth_rpcgss oid_registry overlay mlx5_ib ib_uverbs ib_core zram zsmalloc mlx5_core fuse ---[ end trace 0000000000000000 ]--- Fixes: 3178308ad4ca ("net/mlx5e: Make tx_port_ts logic resilient to out-of-order CQEs") Signed-off-by: Rahul Rameshbabu Reviewed-by: Tariq Toukan Signed-off-by: Saeed Mahameed Link: https://lore.kernel.org/r/20231114215846.5902-11-saeed@kernel.org Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/mellanox/mlx5/core/en_tx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_tx.c b/drivers/net/ethernet/mellanox/mlx5/core/en_tx.c index 19f2c25b05a0..f0b506e562df 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_tx.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_tx.c @@ -399,9 +399,9 @@ mlx5e_txwqe_complete(struct mlx5e_txqsq *sq, struct sk_buff *skb, u8 metadata_index = be32_to_cpu(eseg->flow_table_metadata); mlx5e_skb_cb_hwtstamp_init(skb); - mlx5e_ptpsq_track_metadata(sq->ptpsq, metadata_index); mlx5e_ptp_metadata_map_put(&sq->ptpsq->metadata_map, skb, metadata_index); + mlx5e_ptpsq_track_metadata(sq->ptpsq, metadata_index); if (!netif_tx_queue_stopped(sq->txq) && mlx5e_ptpsq_metadata_freelist_empty(sq->ptpsq)) { netif_tx_stop_queue(sq->txq); -- cgit v1.2.3 From 92214be5979c0961a471b7eaaaeacab41bdf456c Mon Sep 17 00:00:00 2001 From: Rahul Rameshbabu Date: Tue, 14 Nov 2023 13:58:42 -0800 Subject: net/mlx5e: Update doorbell for port timestamping CQ before the software counter Previously, mlx5e_ptp_poll_ts_cq would update the device doorbell with the incremented consumer index after the relevant software counters in the kernel were updated. In the mlx5e_sq_xmit_wqe context, this would lead to either overrunning the device CQ or exceeding the expected software buffer size in the device CQ if the device CQ size was greater than the software buffer size. Update the relevant software counter only after updating the device CQ consumer index in the port timestamping napi_poll context. Log: mlx5_core 0000:08:00.0: cq_err_event_notifier:517:(pid 0): CQ error on CQN 0x487, syndrome 0x1 mlx5_core 0000:08:00.0 eth2: mlx5e_cq_error_event: cqn=0x000487 event=0x04 Fixes: 1880bc4e4a96 ("net/mlx5e: Add TX port timestamp support") Signed-off-by: Rahul Rameshbabu Signed-off-by: Saeed Mahameed Link: https://lore.kernel.org/r/20231114215846.5902-12-saeed@kernel.org Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/mellanox/mlx5/core/en/ptp.c | 20 ++++++++++++++++---- 1 file changed, 16 insertions(+), 4 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en/ptp.c b/drivers/net/ethernet/mellanox/mlx5/core/en/ptp.c index bb11e644d24f..af3928eddafd 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en/ptp.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en/ptp.c @@ -177,6 +177,8 @@ static void mlx5e_ptpsq_mark_ts_cqes_undelivered(struct mlx5e_ptpsq *ptpsq, static void mlx5e_ptp_handle_ts_cqe(struct mlx5e_ptpsq *ptpsq, struct mlx5_cqe64 *cqe, + u8 *md_buff, + u8 *md_buff_sz, int budget) { struct mlx5e_ptp_port_ts_cqe_list *pending_cqe_list = ptpsq->ts_cqe_pending_list; @@ -211,19 +213,24 @@ static void mlx5e_ptp_handle_ts_cqe(struct mlx5e_ptpsq *ptpsq, mlx5e_ptpsq_mark_ts_cqes_undelivered(ptpsq, hwtstamp); out: napi_consume_skb(skb, budget); - mlx5e_ptp_metadata_fifo_push(&ptpsq->metadata_freelist, metadata_id); + md_buff[*md_buff_sz++] = metadata_id; if (unlikely(mlx5e_ptp_metadata_map_unhealthy(&ptpsq->metadata_map)) && !test_and_set_bit(MLX5E_SQ_STATE_RECOVERING, &sq->state)) queue_work(ptpsq->txqsq.priv->wq, &ptpsq->report_unhealthy_work); } -static bool mlx5e_ptp_poll_ts_cq(struct mlx5e_cq *cq, int budget) +static bool mlx5e_ptp_poll_ts_cq(struct mlx5e_cq *cq, int napi_budget) { struct mlx5e_ptpsq *ptpsq = container_of(cq, struct mlx5e_ptpsq, ts_cq); - struct mlx5_cqwq *cqwq = &cq->wq; + int budget = min(napi_budget, MLX5E_TX_CQ_POLL_BUDGET); + u8 metadata_buff[MLX5E_TX_CQ_POLL_BUDGET]; + u8 metadata_buff_sz = 0; + struct mlx5_cqwq *cqwq; struct mlx5_cqe64 *cqe; int work_done = 0; + cqwq = &cq->wq; + if (unlikely(!test_bit(MLX5E_SQ_STATE_ENABLED, &ptpsq->txqsq.state))) return false; @@ -234,7 +241,8 @@ static bool mlx5e_ptp_poll_ts_cq(struct mlx5e_cq *cq, int budget) do { mlx5_cqwq_pop(cqwq); - mlx5e_ptp_handle_ts_cqe(ptpsq, cqe, budget); + mlx5e_ptp_handle_ts_cqe(ptpsq, cqe, + metadata_buff, &metadata_buff_sz, napi_budget); } while ((++work_done < budget) && (cqe = mlx5_cqwq_get_cqe(cqwq))); mlx5_cqwq_update_db_record(cqwq); @@ -242,6 +250,10 @@ static bool mlx5e_ptp_poll_ts_cq(struct mlx5e_cq *cq, int budget) /* ensure cq space is freed before enabling more cqes */ wmb(); + while (metadata_buff_sz > 0) + mlx5e_ptp_metadata_fifo_push(&ptpsq->metadata_freelist, + metadata_buff[--metadata_buff_sz]); + mlx5e_txqsq_wake(&ptpsq->txqsq); return work_done == budget; -- cgit v1.2.3 From 3338bebfc26a1e2cebbba82a1cf12c0159608e73 Mon Sep 17 00:00:00 2001 From: Rahul Rameshbabu Date: Tue, 14 Nov 2023 13:58:43 -0800 Subject: net/mlx5: Increase size of irq name buffer Without increased buffer size, will trigger -Wformat-truncation with W=1 for the snprintf operation writing to the buffer. drivers/net/ethernet/mellanox/mlx5/core/pci_irq.c: In function 'mlx5_irq_alloc': drivers/net/ethernet/mellanox/mlx5/core/pci_irq.c:296:7: error: '@pci:' directive output may be truncated writing 5 bytes into a region of size between 1 and 32 [-Werror=format-truncation=] 296 | "%s@pci:%s", name, pci_name(dev->pdev)); | ^~~~~ drivers/net/ethernet/mellanox/mlx5/core/pci_irq.c:295:2: note: 'snprintf' output 6 or more bytes (assuming 37) into a destination of size 32 295 | snprintf(irq->name, MLX5_MAX_IRQ_NAME, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 296 | "%s@pci:%s", name, pci_name(dev->pdev)); | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Fixes: ada9f5d00797 ("IB/mlx5: Fix eq names to display nicely in /proc/interrupts") Link: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=6d4ab2e97dcfbcd748ae71761a9d8e5e41cc732c Signed-off-by: Rahul Rameshbabu Reviewed-by: Dragos Tatulea Signed-off-by: Saeed Mahameed Link: https://lore.kernel.org/r/20231114215846.5902-13-saeed@kernel.org Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/mellanox/mlx5/core/pci_irq.c | 6 +++--- drivers/net/ethernet/mellanox/mlx5/core/pci_irq.h | 3 +++ 2 files changed, 6 insertions(+), 3 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/pci_irq.c b/drivers/net/ethernet/mellanox/mlx5/core/pci_irq.c index 653648216730..4dcf995cb1a2 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/pci_irq.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/pci_irq.c @@ -28,7 +28,7 @@ struct mlx5_irq { struct atomic_notifier_head nh; cpumask_var_t mask; - char name[MLX5_MAX_IRQ_NAME]; + char name[MLX5_MAX_IRQ_FORMATTED_NAME]; struct mlx5_irq_pool *pool; int refcount; struct msi_map map; @@ -292,8 +292,8 @@ struct mlx5_irq *mlx5_irq_alloc(struct mlx5_irq_pool *pool, int i, else irq_sf_set_name(pool, name, i); ATOMIC_INIT_NOTIFIER_HEAD(&irq->nh); - snprintf(irq->name, MLX5_MAX_IRQ_NAME, - "%s@pci:%s", name, pci_name(dev->pdev)); + snprintf(irq->name, MLX5_MAX_IRQ_FORMATTED_NAME, + MLX5_IRQ_NAME_FORMAT_STR, name, pci_name(dev->pdev)); err = request_irq(irq->map.virq, irq_int_handler, 0, irq->name, &irq->nh); if (err) { diff --git a/drivers/net/ethernet/mellanox/mlx5/core/pci_irq.h b/drivers/net/ethernet/mellanox/mlx5/core/pci_irq.h index d3a77a0ab848..c4d377f8df30 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/pci_irq.h +++ b/drivers/net/ethernet/mellanox/mlx5/core/pci_irq.h @@ -7,6 +7,9 @@ #include #define MLX5_MAX_IRQ_NAME (32) +#define MLX5_IRQ_NAME_FORMAT_STR ("%s@pci:%s") +#define MLX5_MAX_IRQ_FORMATTED_NAME \ + (MLX5_MAX_IRQ_NAME + sizeof(MLX5_IRQ_NAME_FORMAT_STR)) /* max irq_index is 2047, so four chars */ #define MLX5_MAX_IRQ_IDX_CHARS (4) #define MLX5_EQ_REFS_PER_IRQ (2) -- cgit v1.2.3 From dce94142842e119b982c27c1b62bd20890c7fd21 Mon Sep 17 00:00:00 2001 From: Saeed Mahameed Date: Tue, 14 Nov 2023 13:58:44 -0800 Subject: net/mlx5e: Reduce the size of icosq_str icosq_str size is unnecessarily too long, and it causes a build warning -Wformat-truncation with W=1. Looking closely, It doesn't need to be 255B, hence this patch reduces the size to 32B which should be more than enough to host the string: "ICOSQ: 0x%x, ". While here, add a missing space in the formatted string. This fixes the following build warning: $ KCFLAGS='-Wall -Werror' $ make O=/tmp/kbuild/linux W=1 -s -j12 drivers/net/ethernet/mellanox/mlx5/core/ drivers/net/ethernet/mellanox/mlx5/core/en/reporter_rx.c: In function 'mlx5e_reporter_rx_timeout': drivers/net/ethernet/mellanox/mlx5/core/en/reporter_rx.c:718:56: error: ', CQ: 0x' directive output may be truncated writing 8 bytes into a region of size between 0 and 255 [-Werror=format-truncation=] 718 | "RX timeout on channel: %d, %sRQ: 0x%x, CQ: 0x%x", | ^~~~~~~~ drivers/net/ethernet/mellanox/mlx5/core/en/reporter_rx.c:717:9: note: 'snprintf' output between 43 and 322 bytes into a destination of size 288 717 | snprintf(err_str, sizeof(err_str), | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 718 | "RX timeout on channel: %d, %sRQ: 0x%x, CQ: 0x%x", | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 719 | rq->ix, icosq_str, rq->rqn, rq->cq.mcq.cqn); | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Fixes: 521f31af004a ("net/mlx5e: Allow RQ outside of channel context") Link: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=6d4ab2e97dcfbcd748ae71761a9d8e5e41cc732c Signed-off-by: Saeed Mahameed Link: https://lore.kernel.org/r/20231114215846.5902-14-saeed@kernel.org Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/mellanox/mlx5/core/en/reporter_rx.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en/reporter_rx.c b/drivers/net/ethernet/mellanox/mlx5/core/en/reporter_rx.c index fea8c0a5fe89..4358798d6ce1 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en/reporter_rx.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en/reporter_rx.c @@ -492,11 +492,11 @@ static int mlx5e_rx_reporter_dump(struct devlink_health_reporter *reporter, void mlx5e_reporter_rx_timeout(struct mlx5e_rq *rq) { - char icosq_str[MLX5E_REPORTER_PER_Q_MAX_LEN] = {}; char err_str[MLX5E_REPORTER_PER_Q_MAX_LEN]; struct mlx5e_icosq *icosq = rq->icosq; struct mlx5e_priv *priv = rq->priv; struct mlx5e_err_ctx err_ctx = {}; + char icosq_str[32] = {}; err_ctx.ctx = rq; err_ctx.recover = mlx5e_rx_reporter_timeout_recover; @@ -505,7 +505,7 @@ void mlx5e_reporter_rx_timeout(struct mlx5e_rq *rq) if (icosq) snprintf(icosq_str, sizeof(icosq_str), "ICOSQ: 0x%x, ", icosq->sqn); snprintf(err_str, sizeof(err_str), - "RX timeout on channel: %d, %sRQ: 0x%x, CQ: 0x%x", + "RX timeout on channel: %d, %s RQ: 0x%x, CQ: 0x%x", rq->ix, icosq_str, rq->rqn, rq->cq.mcq.cqn); mlx5e_health_report(priv, priv->rx_reporter, err_str, &err_ctx); -- cgit v1.2.3 From 41e63c2baa11dc2aa71df5dd27a5bd87d11b6bbb Mon Sep 17 00:00:00 2001 From: Rahul Rameshbabu Date: Tue, 14 Nov 2023 13:58:45 -0800 Subject: net/mlx5e: Check return value of snprintf writing to fw_version buffer Treat the operation as an error case when the return value is equivalent to the size of the name buffer. Failed to write null terminator to the name buffer, making the string malformed and should not be used. Provide a string with only the firmware version when forming the string with the board id fails. Without check, will trigger -Wformat-truncation with W=1. drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c: In function 'mlx5e_ethtool_get_drvinfo': drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c:49:31: warning: '%.16s' directive output may be truncated writing up to 16 bytes into a region of size between 13 and 22 [-Wformat-truncation=] 49 | "%d.%d.%04d (%.16s)", | ^~~~~ drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c:48:9: note: 'snprintf' output between 12 and 37 bytes into a destination of size 32 48 | snprintf(drvinfo->fw_version, sizeof(drvinfo->fw_version), | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 49 | "%d.%d.%04d (%.16s)", | ~~~~~~~~~~~~~~~~~~~~~ 50 | fw_rev_maj(mdev), fw_rev_min(mdev), fw_rev_sub(mdev), | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 51 | mdev->board_id); | ~~~~~~~~~~~~~~~ Fixes: 84e11edb71de ("net/mlx5e: Show board id in ethtool driver information") Link: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=6d4ab2e97dcfbcd748ae71761a9d8e5e41cc732c Signed-off-by: Rahul Rameshbabu Reviewed-by: Dragos Tatulea Signed-off-by: Saeed Mahameed Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c b/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c index 215261a69255..792a0ea544cd 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c @@ -43,12 +43,17 @@ void mlx5e_ethtool_get_drvinfo(struct mlx5e_priv *priv, struct ethtool_drvinfo *drvinfo) { struct mlx5_core_dev *mdev = priv->mdev; + int count; strscpy(drvinfo->driver, KBUILD_MODNAME, sizeof(drvinfo->driver)); - snprintf(drvinfo->fw_version, sizeof(drvinfo->fw_version), - "%d.%d.%04d (%.16s)", - fw_rev_maj(mdev), fw_rev_min(mdev), fw_rev_sub(mdev), - mdev->board_id); + count = snprintf(drvinfo->fw_version, sizeof(drvinfo->fw_version), + "%d.%d.%04d (%.16s)", fw_rev_maj(mdev), + fw_rev_min(mdev), fw_rev_sub(mdev), mdev->board_id); + if (count == sizeof(drvinfo->fw_version)) + snprintf(drvinfo->fw_version, sizeof(drvinfo->fw_version), + "%d.%d.%04d", fw_rev_maj(mdev), + fw_rev_min(mdev), fw_rev_sub(mdev)); + strscpy(drvinfo->bus_info, dev_name(mdev->device), sizeof(drvinfo->bus_info)); } -- cgit v1.2.3 From 1b2bd0c0264febcd8d47209079a6671c38e6558b Mon Sep 17 00:00:00 2001 From: Rahul Rameshbabu Date: Tue, 14 Nov 2023 13:58:46 -0800 Subject: net/mlx5e: Check return value of snprintf writing to fw_version buffer for representors Treat the operation as an error case when the return value is equivalent to the size of the name buffer. Failed to write null terminator to the name buffer, making the string malformed and should not be used. Provide a string with only the firmware version when forming the string with the board id fails. This logic for representors is identical to normal flow with ethtool. Without check, will trigger -Wformat-truncation with W=1. drivers/net/ethernet/mellanox/mlx5/core/en_rep.c: In function 'mlx5e_rep_get_drvinfo': drivers/net/ethernet/mellanox/mlx5/core/en_rep.c:78:31: warning: '%.16s' directive output may be truncated writing up to 16 bytes into a region of size between 13 and 22 [-Wformat-truncation=] 78 | "%d.%d.%04d (%.16s)", | ^~~~~ drivers/net/ethernet/mellanox/mlx5/core/en_rep.c:77:9: note: 'snprintf' output between 12 and 37 bytes into a destination of size 32 77 | snprintf(drvinfo->fw_version, sizeof(drvinfo->fw_version), | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 78 | "%d.%d.%04d (%.16s)", | ~~~~~~~~~~~~~~~~~~~~~ 79 | fw_rev_maj(mdev), fw_rev_min(mdev), | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 80 | fw_rev_sub(mdev), mdev->board_id); | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Fixes: cf83c8fdcd47 ("net/mlx5e: Add missing ethtool driver info for representors") Link: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=6d4ab2e97dcfbcd748ae71761a9d8e5e41cc732c Signed-off-by: Rahul Rameshbabu Reviewed-by: Dragos Tatulea Signed-off-by: Saeed Mahameed Link: https://lore.kernel.org/r/20231114215846.5902-16-saeed@kernel.org Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/mellanox/mlx5/core/en_rep.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c b/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c index 693e55b010d9..3ab682bbcf86 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c @@ -71,13 +71,17 @@ static void mlx5e_rep_get_drvinfo(struct net_device *dev, { struct mlx5e_priv *priv = netdev_priv(dev); struct mlx5_core_dev *mdev = priv->mdev; + int count; strscpy(drvinfo->driver, mlx5e_rep_driver_name, sizeof(drvinfo->driver)); - snprintf(drvinfo->fw_version, sizeof(drvinfo->fw_version), - "%d.%d.%04d (%.16s)", - fw_rev_maj(mdev), fw_rev_min(mdev), - fw_rev_sub(mdev), mdev->board_id); + count = snprintf(drvinfo->fw_version, sizeof(drvinfo->fw_version), + "%d.%d.%04d (%.16s)", fw_rev_maj(mdev), + fw_rev_min(mdev), fw_rev_sub(mdev), mdev->board_id); + if (count == sizeof(drvinfo->fw_version)) + snprintf(drvinfo->fw_version, sizeof(drvinfo->fw_version), + "%d.%d.%04d", fw_rev_maj(mdev), + fw_rev_min(mdev), fw_rev_sub(mdev)); } static const struct counter_desc sw_rep_stats_desc[] = { -- cgit v1.2.3 From 7cd5af0e937a197295f3aa3721031f0fbae49cff Mon Sep 17 00:00:00 2001 From: Xin Long Date: Mon, 13 Nov 2023 12:53:28 -0500 Subject: net: sched: do not offload flows with a helper in act_ct There is no hardware supporting ct helper offload. However, prior to this patch, a flower filter with a helper in the ct action can be successfully set into the HW, for example (eth1 is a bnxt NIC): # tc qdisc add dev eth1 ingress_block 22 ingress # tc filter add block 22 proto ip flower skip_sw ip_proto tcp \ dst_port 21 ct_state -trk action ct helper ipv4-tcp-ftp # tc filter show dev eth1 ingress filter block 22 protocol ip pref 49152 flower chain 0 handle 0x1 eth_type ipv4 ip_proto tcp dst_port 21 ct_state -trk skip_sw in_hw in_hw_count 1 <---- action order 1: ct zone 0 helper ipv4-tcp-ftp pipe index 2 ref 1 bind 1 used_hw_stats delayed This might cause the flower filter not to work as expected in the HW. This patch avoids this problem by simply returning -EOPNOTSUPP in tcf_ct_offload_act_setup() to not allow to offload flows with a helper in act_ct. Fixes: a21b06e73191 ("net: sched: add helper support in act_ct") Signed-off-by: Xin Long Reviewed-by: Jamal Hadi Salim Link: https://lore.kernel.org/r/f8685ec7702c4a448a1371a8b34b43217b583b9d.1699898008.git.lucien.xin@gmail.com Signed-off-by: Paolo Abeni --- include/net/tc_act/tc_ct.h | 9 +++++++++ net/sched/act_ct.c | 3 +++ 2 files changed, 12 insertions(+) diff --git a/include/net/tc_act/tc_ct.h b/include/net/tc_act/tc_ct.h index 8a6dbfb23336..77f87c622a2e 100644 --- a/include/net/tc_act/tc_ct.h +++ b/include/net/tc_act/tc_ct.h @@ -58,6 +58,11 @@ static inline struct nf_flowtable *tcf_ct_ft(const struct tc_action *a) return to_ct_params(a)->nf_ft; } +static inline struct nf_conntrack_helper *tcf_ct_helper(const struct tc_action *a) +{ + return to_ct_params(a)->helper; +} + #else static inline uint16_t tcf_ct_zone(const struct tc_action *a) { return 0; } static inline int tcf_ct_action(const struct tc_action *a) { return 0; } @@ -65,6 +70,10 @@ static inline struct nf_flowtable *tcf_ct_ft(const struct tc_action *a) { return NULL; } +static inline struct nf_conntrack_helper *tcf_ct_helper(const struct tc_action *a) +{ + return NULL; +} #endif /* CONFIG_NF_CONNTRACK */ #if IS_ENABLED(CONFIG_NET_ACT_CT) diff --git a/net/sched/act_ct.c b/net/sched/act_ct.c index 0db0ecf1d110..b3f4a503ee2b 100644 --- a/net/sched/act_ct.c +++ b/net/sched/act_ct.c @@ -1549,6 +1549,9 @@ static int tcf_ct_offload_act_setup(struct tc_action *act, void *entry_data, if (bind) { struct flow_action_entry *entry = entry_data; + if (tcf_ct_helper(act)) + return -EOPNOTSUPP; + entry->id = FLOW_ACTION_CT; entry->ct.action = tcf_ct_action(act); entry->ct.zone = tcf_ct_zone(act); -- cgit v1.2.3 From e49c0b1401d0d0efc8aeeb9db5a9d54e980d9f69 Mon Sep 17 00:00:00 2001 From: Vegard Nossum Date: Sun, 22 Oct 2023 20:58:06 +0200 Subject: Documentation: coresight: fix `make refcheckdocs` warning This reference uses a glob pattern to match multiple files, but the asterisk was escaped as \* in order to not be interpreted by sphinx as reStructuredText markup. refcheckdocs/documentation-file-ref-check doesn't know about rST syntax and tries to interpret the \* literally (instead of as a glob). We can work around the warning by putting the Documentation reference inside double backticks (``..``), which allows us to not escape the asterisk. Fixes: c06475910b52 ("Documentation: coresight: Escape coresight bindings file wildcard") Cc: Mathieu Poirier Cc: Suzuki K Poulose Cc: Mike Leach Cc: Leo Yan Cc: Jonathan Corbet Cc: Rob Herring Cc: coresight@lists.linaro.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-next@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: Stephen Rothwell Cc: Bagas Sanjaya Signed-off-by: Vegard Nossum Reviewed-by: Bagas Sanjaya Signed-off-by: Suzuki K Poulose Link: https://lore.kernel.org/r/20231022185806.919434-1-vegard.nossum@oracle.com --- Documentation/trace/coresight/coresight.rst | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/trace/coresight/coresight.rst b/Documentation/trace/coresight/coresight.rst index 4a71ea6cb390..826e59a698da 100644 --- a/Documentation/trace/coresight/coresight.rst +++ b/Documentation/trace/coresight/coresight.rst @@ -130,7 +130,7 @@ Misc: Device Tree Bindings -------------------- -See Documentation/devicetree/bindings/arm/arm,coresight-\*.yaml for details. +See ``Documentation/devicetree/bindings/arm/arm,coresight-*.yaml`` for details. As of this writing drivers for ITM, STMs and CTIs are not provided but are expected to be added as the solution matures. -- cgit v1.2.3 From 7e1caeace0418381f36b3aa8403dfd82fc57fc53 Mon Sep 17 00:00:00 2001 From: Vlad Buslov Date: Tue, 14 Nov 2023 18:59:15 +0100 Subject: macvlan: Don't propagate promisc change to lower dev in passthru Macvlan device in passthru mode sets its lower device promiscuous mode according to its MACVLAN_FLAG_NOPROMISC flag instead of synchronizing it to its own promiscuity setting. However, macvlan_change_rx_flags() function doesn't check the mode before propagating such changes to the lower device which can cause net_device->promiscuity counter overflow as illustrated by reproduction example [0] and resulting dmesg log [1]. Fix the issue by first verifying the mode in macvlan_change_rx_flags() function before propagating promiscuous mode change to the lower device. [0]: ip link add macvlan1 link enp8s0f0 type macvlan mode passthru ip link set macvlan1 promisc on ip l set dev macvlan1 up ip link set macvlan1 promisc off ip l set dev macvlan1 down ip l set dev macvlan1 up [1]: [ 5156.281724] macvlan1: entered promiscuous mode [ 5156.285467] mlx5_core 0000:08:00.0 enp8s0f0: entered promiscuous mode [ 5156.287639] macvlan1: left promiscuous mode [ 5156.288339] mlx5_core 0000:08:00.0 enp8s0f0: left promiscuous mode [ 5156.290907] mlx5_core 0000:08:00.0 enp8s0f0: entered promiscuous mode [ 5156.317197] mlx5_core 0000:08:00.0 enp8s0f0: promiscuity touches roof, set promiscuity failed. promiscuity feature of device might be broken. Fixes: efdbd2b30caa ("macvlan: Propagate promiscuity setting to lower devices.") Reviewed-by: Gal Pressman Signed-off-by: Vlad Buslov Reviewed-by: Jiri Pirko Link: https://lore.kernel.org/r/20231114175915.1649154-1-vladbu@nvidia.com Signed-off-by: Paolo Abeni --- drivers/net/macvlan.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/macvlan.c b/drivers/net/macvlan.c index 02bd201bc7e5..c8da94af4161 100644 --- a/drivers/net/macvlan.c +++ b/drivers/net/macvlan.c @@ -780,7 +780,7 @@ static void macvlan_change_rx_flags(struct net_device *dev, int change) if (dev->flags & IFF_UP) { if (change & IFF_ALLMULTI) dev_set_allmulti(lowerdev, dev->flags & IFF_ALLMULTI ? 1 : -1); - if (change & IFF_PROMISC) + if (!macvlan_passthru(vlan->port) && change & IFF_PROMISC) dev_set_promiscuity(lowerdev, dev->flags & IFF_PROMISC ? 1 : -1); -- cgit v1.2.3 From b8411287aef4a994eff0c68f5597910c4194dfe3 Mon Sep 17 00:00:00 2001 From: Junhao He Date: Tue, 14 Nov 2023 21:33:43 +0800 Subject: coresight: ultrasoc-smb: Fix sleep while close preempt in enable_smb When we to enable the SMB by perf, the perf sched will call perf_ctx_lock() to close system preempt in event_function_call(). But SMB::enable_smb() use mutex to lock the critical section, which may sleep. BUG: sleeping function called from invalid context at kernel/locking/mutex.c:580 in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 153023, name: perf preempt_count: 2, expected: 0 RCU nest depth: 0, expected: 0 INFO: lockdep is turned off. irq event stamp: 0 hardirqs last enabled at (0): [<0000000000000000>] 0x0 hardirqs last disabled at (0): [] copy_process+0xae8/0x2b48 softirqs last enabled at (0): [] copy_process+0xae8/0x2b48 softirqs last disabled at (0): [<0000000000000000>] 0x0 CPU: 2 PID: 153023 Comm: perf Kdump: loaded Tainted: G W O 6.5.0-rc4+ #1 Call trace: ... __mutex_lock+0xbc/0xa70 mutex_lock_nested+0x34/0x48 smb_update_buffer+0x58/0x360 [ultrasoc_smb] etm_event_stop+0x204/0x2d8 [coresight] etm_event_del+0x1c/0x30 [coresight] event_sched_out+0x17c/0x3b8 group_sched_out.part.0+0x5c/0x208 __perf_event_disable+0x15c/0x210 event_function+0xe0/0x230 remote_function+0xb4/0xe8 generic_exec_single+0x160/0x268 smp_call_function_single+0x20c/0x2a0 event_function_call+0x20c/0x220 _perf_event_disable+0x5c/0x90 perf_event_for_each_child+0x58/0xc0 _perf_ioctl+0x34c/0x1250 perf_ioctl+0x64/0x98 ... Use spinlock to replace mutex to control driver data access to one at a time. The function copy_to_user() may sleep, it cannot be in a spinlock context, so we can't simply replace it in smb_read(). But we can ensure that only one user gets the SMB device fd by smb_open(), so remove the locks from smb_read() and buffer synchronization is guaranteed by the user. Fixes: 06f5c2926aaa ("drivers/coresight: Add UltraSoc System Memory Buffer driver") Signed-off-by: Junhao He Reviewed-by: James Clark Signed-off-by: Suzuki K Poulose Link: https://lore.kernel.org/r/20231114133346.30489-2-hejunhao3@huawei.com --- drivers/hwtracing/coresight/ultrasoc-smb.c | 35 ++++++++++++------------------ drivers/hwtracing/coresight/ultrasoc-smb.h | 6 ++--- 2 files changed, 17 insertions(+), 24 deletions(-) diff --git a/drivers/hwtracing/coresight/ultrasoc-smb.c b/drivers/hwtracing/coresight/ultrasoc-smb.c index e9a32a97fbee..0a0fe9fcc57f 100644 --- a/drivers/hwtracing/coresight/ultrasoc-smb.c +++ b/drivers/hwtracing/coresight/ultrasoc-smb.c @@ -99,7 +99,7 @@ static int smb_open(struct inode *inode, struct file *file) struct smb_drv_data, miscdev); int ret = 0; - mutex_lock(&drvdata->mutex); + spin_lock(&drvdata->spinlock); if (drvdata->reading) { ret = -EBUSY; @@ -115,7 +115,7 @@ static int smb_open(struct inode *inode, struct file *file) drvdata->reading = true; out: - mutex_unlock(&drvdata->mutex); + spin_unlock(&drvdata->spinlock); return ret; } @@ -132,10 +132,8 @@ static ssize_t smb_read(struct file *file, char __user *data, size_t len, if (!len) return 0; - mutex_lock(&drvdata->mutex); - if (!sdb->data_size) - goto out; + return 0; to_copy = min(sdb->data_size, len); @@ -145,20 +143,15 @@ static ssize_t smb_read(struct file *file, char __user *data, size_t len, if (copy_to_user(data, sdb->buf_base + sdb->buf_rdptr, to_copy)) { dev_dbg(dev, "Failed to copy data to user\n"); - to_copy = -EFAULT; - goto out; + return -EFAULT; } *ppos += to_copy; - smb_update_read_ptr(drvdata, to_copy); - - dev_dbg(dev, "%zu bytes copied\n", to_copy); -out: if (!sdb->data_size) smb_reset_buffer(drvdata); - mutex_unlock(&drvdata->mutex); + dev_dbg(dev, "%zu bytes copied\n", to_copy); return to_copy; } @@ -167,9 +160,9 @@ static int smb_release(struct inode *inode, struct file *file) struct smb_drv_data *drvdata = container_of(file->private_data, struct smb_drv_data, miscdev); - mutex_lock(&drvdata->mutex); + spin_lock(&drvdata->spinlock); drvdata->reading = false; - mutex_unlock(&drvdata->mutex); + spin_unlock(&drvdata->spinlock); return 0; } @@ -262,7 +255,7 @@ static int smb_enable(struct coresight_device *csdev, enum cs_mode mode, struct smb_drv_data *drvdata = dev_get_drvdata(csdev->dev.parent); int ret = 0; - mutex_lock(&drvdata->mutex); + spin_lock(&drvdata->spinlock); /* Do nothing, the trace data is reading by other interface now */ if (drvdata->reading) { @@ -294,7 +287,7 @@ static int smb_enable(struct coresight_device *csdev, enum cs_mode mode, dev_dbg(&csdev->dev, "Ultrasoc SMB enabled\n"); out: - mutex_unlock(&drvdata->mutex); + spin_unlock(&drvdata->spinlock); return ret; } @@ -304,7 +297,7 @@ static int smb_disable(struct coresight_device *csdev) struct smb_drv_data *drvdata = dev_get_drvdata(csdev->dev.parent); int ret = 0; - mutex_lock(&drvdata->mutex); + spin_lock(&drvdata->spinlock); if (drvdata->reading) { ret = -EBUSY; @@ -327,7 +320,7 @@ static int smb_disable(struct coresight_device *csdev) dev_dbg(&csdev->dev, "Ultrasoc SMB disabled\n"); out: - mutex_unlock(&drvdata->mutex); + spin_unlock(&drvdata->spinlock); return ret; } @@ -408,7 +401,7 @@ static unsigned long smb_update_buffer(struct coresight_device *csdev, if (!buf) return 0; - mutex_lock(&drvdata->mutex); + spin_lock(&drvdata->spinlock); /* Don't do anything if another tracer is using this sink. */ if (atomic_read(&csdev->refcnt) != 1) @@ -432,7 +425,7 @@ static unsigned long smb_update_buffer(struct coresight_device *csdev, if (!buf->snapshot && lost) perf_aux_output_flag(handle, PERF_AUX_FLAG_TRUNCATED); out: - mutex_unlock(&drvdata->mutex); + spin_unlock(&drvdata->spinlock); return data_size; } @@ -590,7 +583,7 @@ static int smb_probe(struct platform_device *pdev) return ret; } - mutex_init(&drvdata->mutex); + spin_lock_init(&drvdata->spinlock); drvdata->pid = -1; ret = smb_register_sink(pdev, drvdata); diff --git a/drivers/hwtracing/coresight/ultrasoc-smb.h b/drivers/hwtracing/coresight/ultrasoc-smb.h index d2e14e8d2c8a..82a44c14a882 100644 --- a/drivers/hwtracing/coresight/ultrasoc-smb.h +++ b/drivers/hwtracing/coresight/ultrasoc-smb.h @@ -8,7 +8,7 @@ #define _ULTRASOC_SMB_H #include -#include +#include /* Offset of SMB global registers */ #define SMB_GLB_CFG_REG 0x00 @@ -105,7 +105,7 @@ struct smb_data_buffer { * @csdev: Component vitals needed by the framework. * @sdb: Data buffer for SMB. * @miscdev: Specifics to handle "/dev/xyz.smb" entry. - * @mutex: Control data access to one at a time. + * @spinlock: Control data access to one at a time. * @reading: Synchronise user space access to SMB buffer. * @pid: Process ID of the process being monitored by the * session that is using this component. @@ -116,7 +116,7 @@ struct smb_drv_data { struct coresight_device *csdev; struct smb_data_buffer sdb; struct miscdevice miscdev; - struct mutex mutex; + spinlock_t spinlock; bool reading; pid_t pid; enum cs_mode mode; -- cgit v1.2.3 From 830a7f54db102c889a3fe1c0a225f369ac05f07f Mon Sep 17 00:00:00 2001 From: Junhao He Date: Tue, 14 Nov 2023 21:33:44 +0800 Subject: coresight: ultrasoc-smb: Config SMB buffer before register sink The SMB dirver register the enable/disable sysfs interface in function smb_register_sink(), however the buffer depends on the following configuration to work well. So it'll be possible for user to access an unreset one. Move the config buffer operation to before register_sink(). Ignore the return value, if smb_config_inport() fails. That will cause the hardwares disable trace path to fail, should not affect SMB driver remove. So we make smb_remove() return success, Fixes: 06f5c2926aaa ("drivers/coresight: Add UltraSoc System Memory Buffer driver") Signed-off-by: Junhao He Reviewed-by: James Clark Signed-off-by: Suzuki K Poulose Link: https://lore.kernel.org/r/20231114133346.30489-3-hejunhao3@huawei.com --- drivers/hwtracing/coresight/ultrasoc-smb.c | 21 ++++++++------------- 1 file changed, 8 insertions(+), 13 deletions(-) diff --git a/drivers/hwtracing/coresight/ultrasoc-smb.c b/drivers/hwtracing/coresight/ultrasoc-smb.c index 0a0fe9fcc57f..2f2aba90a514 100644 --- a/drivers/hwtracing/coresight/ultrasoc-smb.c +++ b/drivers/hwtracing/coresight/ultrasoc-smb.c @@ -583,37 +583,32 @@ static int smb_probe(struct platform_device *pdev) return ret; } + ret = smb_config_inport(dev, true); + if (ret) + return ret; + + platform_set_drvdata(pdev, drvdata); spin_lock_init(&drvdata->spinlock); drvdata->pid = -1; ret = smb_register_sink(pdev, drvdata); if (ret) { + smb_config_inport(&pdev->dev, false); dev_err(dev, "Failed to register SMB sink\n"); return ret; } - ret = smb_config_inport(dev, true); - if (ret) { - smb_unregister_sink(drvdata); - return ret; - } - - platform_set_drvdata(pdev, drvdata); - return 0; } static int smb_remove(struct platform_device *pdev) { struct smb_drv_data *drvdata = platform_get_drvdata(pdev); - int ret; - - ret = smb_config_inport(&pdev->dev, false); - if (ret) - return ret; smb_unregister_sink(drvdata); + smb_config_inport(&pdev->dev, false); + return 0; } -- cgit v1.2.3 From 862c135bde8bc185e8aae2110374175e6a1b6ed5 Mon Sep 17 00:00:00 2001 From: Junhao He Date: Tue, 14 Nov 2023 21:33:45 +0800 Subject: coresight: ultrasoc-smb: Fix uninitialized before use buf_hw_base In smb_reset_buffer, the sdb->buf_hw_base variable is uninitialized before use, which initializes it in smb_init_data_buffer. And the SMB regiester are set in smb_config_inport. So move the call after smb_config_inport. Fixes: 06f5c2926aaa ("drivers/coresight: Add UltraSoc System Memory Buffer driver") Signed-off-by: Junhao He Reviewed-by: James Clark Signed-off-by: Suzuki K Poulose Link: https://lore.kernel.org/r/20231114133346.30489-4-hejunhao3@huawei.com --- drivers/hwtracing/coresight/ultrasoc-smb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/hwtracing/coresight/ultrasoc-smb.c b/drivers/hwtracing/coresight/ultrasoc-smb.c index 2f2aba90a514..6e32d31a95fe 100644 --- a/drivers/hwtracing/coresight/ultrasoc-smb.c +++ b/drivers/hwtracing/coresight/ultrasoc-smb.c @@ -477,7 +477,6 @@ static int smb_init_data_buffer(struct platform_device *pdev, static void smb_init_hw(struct smb_drv_data *drvdata) { smb_disable_hw(drvdata); - smb_reset_buffer(drvdata); writel(SMB_LB_CFG_LO_DEFAULT, drvdata->base + SMB_LB_CFG_LO_REG); writel(SMB_LB_CFG_HI_DEFAULT, drvdata->base + SMB_LB_CFG_HI_REG); @@ -587,6 +586,7 @@ static int smb_probe(struct platform_device *pdev) if (ret) return ret; + smb_reset_buffer(drvdata); platform_set_drvdata(pdev, drvdata); spin_lock_init(&drvdata->spinlock); drvdata->pid = -1; -- cgit v1.2.3 From 1c4a7587d1bbee0fd53b63af60e4244a62775f57 Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Wed, 1 Nov 2023 02:46:27 +0900 Subject: modpost: fix section mismatch message for RELA The section mismatch check prints a bogus symbol name on some architectures. [test code] #include int __initdata foo; int get_foo(void) { return foo; } If you compile it with GCC for riscv or loongarch, modpost will show an incorrect symbol name: WARNING: modpost: vmlinux: section mismatch in reference: get_foo+0x8 (section: .text) -> done (section: .init.data) To get the correct symbol address, the st_value must be added. This issue has never been noticed since commit 93684d3b8062 ("kbuild: include symbol names in section mismatch warnings") presumably because st_value becomes zero on most architectures when the referenced symbol is looked up. It is not true for riscv or loongarch, at least. With this fix, modpost will show the correct symbol name: WARNING: modpost: vmlinux: section mismatch in reference: get_foo+0x8 (section: .text) -> foo (section: .init.data) Signed-off-by: Masahiro Yamada Reviewed-by: Nick Desaulniers --- scripts/mod/modpost.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/scripts/mod/modpost.c b/scripts/mod/modpost.c index 973b5e5ae2dd..cb6406f485a9 100644 --- a/scripts/mod/modpost.c +++ b/scripts/mod/modpost.c @@ -1383,13 +1383,15 @@ static void section_rela(struct module *mod, struct elf_info *elf, const Elf_Rela *rela; for (rela = start; rela < stop; rela++) { + Elf_Sym *tsym; Elf_Addr taddr, r_offset; unsigned int r_type, r_sym; r_offset = TO_NATIVE(rela->r_offset); get_rel_type_and_sym(elf, rela->r_info, &r_type, &r_sym); - taddr = TO_NATIVE(rela->r_addend); + tsym = elf->symtab_start + r_sym; + taddr = tsym->st_value + TO_NATIVE(rela->r_addend); switch (elf->hdr->e_machine) { case EM_RISCV: @@ -1404,7 +1406,7 @@ static void section_rela(struct module *mod, struct elf_info *elf, break; } - check_section_mismatch(mod, elf, elf->symtab_start + r_sym, + check_section_mismatch(mod, elf, tsym, fsecndx, fromsec, r_offset, taddr); } } -- cgit v1.2.3 From 0f40d5099cd6d828fd7de6227d3eabe86016724c Mon Sep 17 00:00:00 2001 From: Andrew Davis Date: Wed, 25 Oct 2023 09:33:02 -0500 Subject: phy: ti: gmii-sel: Fix register offset when parent is not a syscon node When the node for this phy selector is a child node of a syscon node then the property 'reg' is used as an offset into the parent regmap. When the node is standalone and gets its own regmap this offset is pre-applied. So we need to track which method was used to get the regmap and not apply the offset in the standalone case. Fixes: 1fdfa7cccd35 ("phy: ti: gmii-sel: Allow parent to not be syscon node") Signed-off-by: Andrew Davis Reviewed-by: Roger Quadros Link: https://lore.kernel.org/r/20231025143302.1265633-1-afd@ti.com Signed-off-by: Vinod Koul --- drivers/phy/ti/phy-gmii-sel.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/phy/ti/phy-gmii-sel.c b/drivers/phy/ti/phy-gmii-sel.c index 555b323f45da..bc847d3879f7 100644 --- a/drivers/phy/ti/phy-gmii-sel.c +++ b/drivers/phy/ti/phy-gmii-sel.c @@ -64,6 +64,7 @@ struct phy_gmii_sel_priv { u32 num_ports; u32 reg_offset; u32 qsgmii_main_ports; + bool no_offset; }; static int phy_gmii_sel_mode(struct phy *phy, enum phy_mode mode, int submode) @@ -402,7 +403,8 @@ static int phy_gmii_sel_init_ports(struct phy_gmii_sel_priv *priv) priv->num_ports = size / sizeof(u32); if (!priv->num_ports) return -EINVAL; - priv->reg_offset = __be32_to_cpu(*offset); + if (!priv->no_offset) + priv->reg_offset = __be32_to_cpu(*offset); } if_phys = devm_kcalloc(dev, priv->num_ports, @@ -471,6 +473,7 @@ static int phy_gmii_sel_probe(struct platform_device *pdev) dev_err(dev, "Failed to get syscon %d\n", ret); return ret; } + priv->no_offset = true; } ret = phy_gmii_sel_init_ports(priv); -- cgit v1.2.3 From 9ea7be95d3d4d76df63cef13b4360cd58548b2ef Mon Sep 17 00:00:00 2001 From: Martin Tůma Date: Wed, 25 Oct 2023 18:51:47 +0200 Subject: media: mgb4: Added support for T200 card variant MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit T200 card variants use the XC7A200T FPGA instead of XC7A100T. The SPI FLASH memory layout is different as the FPGA requires bigger FW images. Signed-off-by: Martin Tůma Signed-off-by: Hans Verkuil --- drivers/media/pci/mgb4/mgb4_core.c | 20 +++++++++++++++----- 1 file changed, 15 insertions(+), 5 deletions(-) diff --git a/drivers/media/pci/mgb4/mgb4_core.c b/drivers/media/pci/mgb4/mgb4_core.c index 3efb33fbf40c..5bfb8a06202e 100644 --- a/drivers/media/pci/mgb4/mgb4_core.c +++ b/drivers/media/pci/mgb4/mgb4_core.c @@ -42,6 +42,10 @@ #define MGB4_USER_IRQS 16 +#define DIGITEQ_VID 0x1ed8 +#define T100_DID 0x0101 +#define T200_DID 0x0201 + ATTRIBUTE_GROUPS(mgb4_pci); static int flashid; @@ -151,7 +155,7 @@ static struct spi_master *get_spi_adap(struct platform_device *pdev) return dev ? container_of(dev, struct spi_master, dev) : NULL; } -static int init_spi(struct mgb4_dev *mgbdev) +static int init_spi(struct mgb4_dev *mgbdev, u32 devid) { struct resource spi_resources[] = { { @@ -213,8 +217,13 @@ static int init_spi(struct mgb4_dev *mgbdev) snprintf(mgbdev->fw_part_name, sizeof(mgbdev->fw_part_name), "mgb4-fw.%d", flashid); mgbdev->partitions[0].name = mgbdev->fw_part_name; - mgbdev->partitions[0].size = 0x400000; - mgbdev->partitions[0].offset = 0x400000; + if (devid == T200_DID) { + mgbdev->partitions[0].size = 0x950000; + mgbdev->partitions[0].offset = 0x1000000; + } else { + mgbdev->partitions[0].size = 0x400000; + mgbdev->partitions[0].offset = 0x400000; + } mgbdev->partitions[0].mask_flags = 0; snprintf(mgbdev->data_part_name, sizeof(mgbdev->data_part_name), @@ -551,7 +560,7 @@ static int mgb4_probe(struct pci_dev *pdev, const struct pci_device_id *id) goto err_video_regs; /* SPI FLASH */ - rv = init_spi(mgbdev); + rv = init_spi(mgbdev, id->device); if (rv < 0) goto err_cmt_regs; @@ -666,7 +675,8 @@ static void mgb4_remove(struct pci_dev *pdev) } static const struct pci_device_id mgb4_pci_ids[] = { - { PCI_DEVICE(0x1ed8, 0x0101), }, + { PCI_DEVICE(DIGITEQ_VID, T100_DID), }, + { PCI_DEVICE(DIGITEQ_VID, T200_DID), }, { 0, } }; MODULE_DEVICE_TABLE(pci, mgb4_pci_ids); -- cgit v1.2.3 From 5d33213fac5929a2e7766c88d78779fd443b0fe8 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Fri, 3 Nov 2023 10:39:24 +0300 Subject: media: v4l2-subdev: Fix a 64bit bug The problem is this line here from subdev_do_ioctl(). client_cap->capabilities &= ~V4L2_SUBDEV_CLIENT_CAP_STREAMS; The "client_cap->capabilities" variable is a u64. The AND operation is supposed to clear out the V4L2_SUBDEV_CLIENT_CAP_STREAMS flag. But because it's a 32 bit variable it accidentally clears out the high 32 bits as well. Currently we only use the first bit and none of the upper bits so this doesn't affect runtime behavior. Fixes: f57fa2959244 ("media: v4l2-subdev: Add new ioctl for client capabilities") Signed-off-by: Dan Carpenter Reviewed-by: Tomi Valkeinen Signed-off-by: Hans Verkuil --- include/uapi/linux/v4l2-subdev.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/uapi/linux/v4l2-subdev.h b/include/uapi/linux/v4l2-subdev.h index 4a195b68f28f..b383c2fe0cf3 100644 --- a/include/uapi/linux/v4l2-subdev.h +++ b/include/uapi/linux/v4l2-subdev.h @@ -239,7 +239,7 @@ struct v4l2_subdev_routing { * set (which is the default), the 'stream' fields will be forced to 0 by the * kernel. */ - #define V4L2_SUBDEV_CLIENT_CAP_STREAMS (1U << 0) + #define V4L2_SUBDEV_CLIENT_CAP_STREAMS (1ULL << 0) /** * struct v4l2_subdev_client_capability - Capabilities of the client accessing -- cgit v1.2.3 From 173d167ce350961d7d689a4d59d66a5f2ad70a76 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Mon, 23 Oct 2023 18:05:31 +0200 Subject: media: pci: mgb4: add COMMON_CLK dependency MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This driver fails to build when HAVE_CLK and COMMON_CLK are disabled: x86_64-linux-ld: vmlinux.o: in function `mgb4_remove': mgb4_core.c:(.text+0x1915e8c): undefined reference to `clkdev_drop' x86_64-linux-ld: mgb4_core.c:(.text+0x1915e98): undefined reference to `clk_hw_unregister' Add a Kconfig dependency to enforce a clean build. Fixes: 0ab13674a9bd ("media: pci: mgb4: Added Digiteq Automotive MGB4 driver") Signed-off-by: Arnd Bergmann Reviewed-by: Martin Tůma Signed-off-by: Hans Verkuil --- drivers/media/pci/mgb4/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/media/pci/mgb4/Kconfig b/drivers/media/pci/mgb4/Kconfig index 13fad15a434c..f2a05a1c8ffa 100644 --- a/drivers/media/pci/mgb4/Kconfig +++ b/drivers/media/pci/mgb4/Kconfig @@ -2,6 +2,7 @@ config VIDEO_MGB4 tristate "Digiteq Automotive MGB4 support" depends on VIDEO_DEV && PCI && I2C && DMADEVICES && SPI && MTD && IIO + depends on COMMON_CLK select VIDEOBUF2_DMA_SG select IIO_BUFFER select IIO_TRIGGERED_BUFFER -- cgit v1.2.3 From 6588732445ff19f6183f0fa72ddedf67e5a5be32 Mon Sep 17 00:00:00 2001 From: Charles Keepax Date: Wed, 15 Nov 2023 16:28:53 +0000 Subject: pinctrl: lochnagar: Don't build on MIPS MIPS appears to define a RST symbol at a high level, which clashes with some register naming in the driver. Since there is currently no case for running this driver on MIPS devices simply cut off the build of this driver on MIPS. Reported-by: kernel test robot Closes: https://lore.kernel.org/oe-kbuild-all/202311071303.JJMAOjy4-lkp@intel.com/ Suggested-by: Linus Walleij Signed-off-by: Charles Keepax Link: https://lore.kernel.org/r/20231115162853.1891940-1-ckeepax@opensource.cirrus.com Signed-off-by: Linus Walleij --- drivers/pinctrl/cirrus/Kconfig | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/pinctrl/cirrus/Kconfig b/drivers/pinctrl/cirrus/Kconfig index d6318cb57aff..e7e827a8877a 100644 --- a/drivers/pinctrl/cirrus/Kconfig +++ b/drivers/pinctrl/cirrus/Kconfig @@ -12,7 +12,8 @@ config PINCTRL_CS42L43 config PINCTRL_LOCHNAGAR tristate "Cirrus Logic Lochnagar pinctrl driver" - depends on MFD_LOCHNAGAR + # Avoid clash caused by MIPS defining RST, which is used in the driver + depends on MFD_LOCHNAGAR && !MIPS select GPIOLIB select PINMUX select PINCONF -- cgit v1.2.3 From 0b6240d697a96eaa45a2a5503a274ebb4f162fa3 Mon Sep 17 00:00:00 2001 From: Jonas Karlman Date: Sun, 5 Nov 2023 23:36:15 +0000 Subject: arm64: dts: rockchip: Expand reg size of vdec node for RK3328 Expand the reg size for the vdec node to include cache/performance registers the rkvdec driver writes to. Fixes: 17408c9b119d ("arm64: dts: rockchip: Add vdec support for RK3328") Signed-off-by: Jonas Karlman Link: https://lore.kernel.org/r/20231105233630.3927502-9-jonas@kwiboo.se Signed-off-by: Heiko Stuebner --- arch/arm64/boot/dts/rockchip/rk3328.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi index e729e7a22b23..cc8209795c3e 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi @@ -668,7 +668,7 @@ vdec: video-codec@ff360000 { compatible = "rockchip,rk3328-vdec", "rockchip,rk3399-vdec"; - reg = <0x0 0xff360000 0x0 0x400>; + reg = <0x0 0xff360000 0x0 0x480>; interrupts = ; clocks = <&cru ACLK_RKVDEC>, <&cru HCLK_RKVDEC>, <&cru SCLK_VDEC_CABAC>, <&cru SCLK_VDEC_CORE>; -- cgit v1.2.3 From 35938c18291b5da7422b2fac6dac0af11aa8d0d7 Mon Sep 17 00:00:00 2001 From: Alex Bee Date: Sun, 5 Nov 2023 23:36:16 +0000 Subject: arm64: dts: rockchip: Expand reg size of vdec node for RK3399 Expand the reg size for the vdec node to include cache/performance registers the rkvdec driver writes to. Also add missing clocks to the related power-domain. Fixes: cbd7214402ec ("arm64: dts: rockchip: Define the rockchip Video Decoder node on rk3399") Signed-off-by: Alex Bee Signed-off-by: Jonas Karlman Link: https://lore.kernel.org/r/20231105233630.3927502-10-jonas@kwiboo.se Signed-off-by: Heiko Stuebner --- arch/arm64/boot/dts/rockchip/rk3399.dtsi | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi index faf02e59d6c7..da0dfb237f85 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi @@ -1109,7 +1109,9 @@ power-domain@RK3399_PD_VDU { reg = ; clocks = <&cru ACLK_VDU>, - <&cru HCLK_VDU>; + <&cru HCLK_VDU>, + <&cru SCLK_VDU_CA>, + <&cru SCLK_VDU_CORE>; pm_qos = <&qos_video_m1_r>, <&qos_video_m1_w>; #power-domain-cells = <0>; @@ -1384,7 +1386,7 @@ vdec: video-codec@ff660000 { compatible = "rockchip,rk3399-vdec"; - reg = <0x0 0xff660000 0x0 0x400>; + reg = <0x0 0xff660000 0x0 0x480>; interrupts = ; clocks = <&cru ACLK_VDU>, <&cru HCLK_VDU>, <&cru SCLK_VDU_CA>, <&cru SCLK_VDU_CORE>; -- cgit v1.2.3 From 3cee9c635f27d1003d46f624d816f3455698b625 Mon Sep 17 00:00:00 2001 From: Heiko Stuebner Date: Tue, 14 Nov 2023 16:38:34 +0100 Subject: arm64: dts: rockchip: fix rk356x pcie msg interrupt name The expected name by the binding at this position is "msg" and the SoC's manual also calls the interrupt in question "msg", so fix the rk356x dtsi to use the correct name. Reviewed-by: Sebastian Reichel Signed-off-by: Heiko Stuebner Link: https://lore.kernel.org/r/20231114153834.934978-1-heiko@sntech.de --- arch/arm64/boot/dts/rockchip/rk356x.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/rockchip/rk356x.dtsi b/arch/arm64/boot/dts/rockchip/rk356x.dtsi index 0964761e3ce9..c19c0f1b3778 100644 --- a/arch/arm64/boot/dts/rockchip/rk356x.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk356x.dtsi @@ -977,7 +977,7 @@ , , ; - interrupt-names = "sys", "pmc", "msi", "legacy", "err"; + interrupt-names = "sys", "pmc", "msg", "legacy", "err"; bus-range = <0x0 0xf>; clocks = <&cru ACLK_PCIE20_MST>, <&cru ACLK_PCIE20_SLV>, <&cru ACLK_PCIE20_DBI>, <&cru PCLK_PCIE20>, -- cgit v1.2.3 From 1af27671f62ce919f1fb76082ed81f71cb090989 Mon Sep 17 00:00:00 2001 From: Chris Morgan Date: Wed, 18 Oct 2023 10:33:55 -0500 Subject: clk: rockchip: rk3568: Add PLL rate for 292.5MHz Add support for a PLL rate of 292.5MHz so that the Powkiddy RGB30 panel can run at a requested 60hz (59.96, close enough). I have confirmed this rate fits with all the constraints listed in the TRM for the VPLL (as an integer PLL) in Part 1 "Chapter 2 Clock & Reset Unit (CRU)." Signed-off-by: Chris Morgan Link: https://lore.kernel.org/r/20231018153357.343142-2-macroalpha82@gmail.com Signed-off-by: Heiko Stuebner --- drivers/clk/rockchip/clk-rk3568.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/clk/rockchip/clk-rk3568.c b/drivers/clk/rockchip/clk-rk3568.c index 16dabe2b9c47..db713e1526cd 100644 --- a/drivers/clk/rockchip/clk-rk3568.c +++ b/drivers/clk/rockchip/clk-rk3568.c @@ -72,6 +72,7 @@ static struct rockchip_pll_rate_table rk3568_pll_rates[] = { RK3036_PLL_RATE(408000000, 1, 68, 2, 2, 1, 0), RK3036_PLL_RATE(312000000, 1, 78, 6, 1, 1, 0), RK3036_PLL_RATE(297000000, 2, 99, 4, 1, 1, 0), + RK3036_PLL_RATE(292500000, 1, 195, 4, 4, 1, 0), RK3036_PLL_RATE(241500000, 2, 161, 4, 2, 1, 0), RK3036_PLL_RATE(216000000, 1, 72, 4, 2, 1, 0), RK3036_PLL_RATE(200000000, 1, 100, 3, 4, 1, 0), -- cgit v1.2.3 From c6c5a5580dcb6631aa6369dabe12ef3ce784d1d2 Mon Sep 17 00:00:00 2001 From: Weihao Li Date: Tue, 31 Oct 2023 19:18:16 +0800 Subject: clk: rockchip: rk3128: Fix HCLK_OTG gate register The HCLK_OTG gate control is in CRU_CLKGATE5_CON, not CRU_CLKGATE3_CON. Signed-off-by: Weihao Li Link: https://lore.kernel.org/r/20231031111816.8777-1-cn.liweihao@gmail.com Signed-off-by: Heiko Stuebner --- drivers/clk/rockchip/clk-rk3128.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/clk/rockchip/clk-rk3128.c b/drivers/clk/rockchip/clk-rk3128.c index aa53797dbfc1..7782785a86e6 100644 --- a/drivers/clk/rockchip/clk-rk3128.c +++ b/drivers/clk/rockchip/clk-rk3128.c @@ -490,7 +490,7 @@ static struct rockchip_clk_branch common_clk_branches[] __initdata = { GATE(HCLK_I2S_2CH, "hclk_i2s_2ch", "hclk_peri", 0, RK2928_CLKGATE_CON(7), 2, GFLAGS), GATE(0, "hclk_usb_peri", "hclk_peri", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(9), 13, GFLAGS), GATE(HCLK_HOST2, "hclk_host2", "hclk_peri", 0, RK2928_CLKGATE_CON(7), 3, GFLAGS), - GATE(HCLK_OTG, "hclk_otg", "hclk_peri", 0, RK2928_CLKGATE_CON(3), 13, GFLAGS), + GATE(HCLK_OTG, "hclk_otg", "hclk_peri", 0, RK2928_CLKGATE_CON(5), 13, GFLAGS), GATE(0, "hclk_peri_ahb", "hclk_peri", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(9), 14, GFLAGS), GATE(HCLK_SPDIF, "hclk_spdif", "hclk_peri", 0, RK2928_CLKGATE_CON(10), 9, GFLAGS), GATE(HCLK_TSP, "hclk_tsp", "hclk_peri", 0, RK2928_CLKGATE_CON(10), 12, GFLAGS), -- cgit v1.2.3 From b3e0f94d15700ac8e8c1c2355834f5d5c753c41d Mon Sep 17 00:00:00 2001 From: Jonathan Marek Date: Thu, 9 Nov 2023 19:02:14 -0500 Subject: drm/msm/dsi: use the correct VREG_CTRL_1 value for 4nm cphy Use the same value as the downstream driver. This change is needed for CPHY mode to work correctly. Fixes: 8b034e677111 ("drm/msm/dsi: add support for DSI-PHY on SM8550") Signed-off-by: Jonathan Marek Reviewed-by: Abhinav Kumar Patchwork: https://patchwork.freedesktop.org/patch/566987/ Link: https://lore.kernel.org/r/20231110000216.29979-1-jonathan@marek.ca Signed-off-by: Abhinav Kumar --- drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c index 3b1ed02f644d..89a6344bc865 100644 --- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c +++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c @@ -918,7 +918,7 @@ static int dsi_7nm_phy_enable(struct msm_dsi_phy *phy, if ((phy->cfg->quirks & DSI_PHY_7NM_QUIRK_V5_2)) { if (phy->cphy_mode) { vreg_ctrl_0 = 0x45; - vreg_ctrl_1 = 0x45; + vreg_ctrl_1 = 0x41; glbl_rescode_top_ctrl = 0x00; glbl_rescode_bot_ctrl = 0x00; } else { -- cgit v1.2.3 From 3944e343e54b93d3fef30eacc4738e77fdf5444e Mon Sep 17 00:00:00 2001 From: Dmitry Baryshkov Date: Tue, 7 Nov 2023 13:14:13 +0200 Subject: drm/msm: remove exra drm_kms_helper_poll_init() call It seems during rebases I have left a call to drm_kms_helper_poll_init() which is not guarded by the (priv->kms_init) check. This leads to the crash for the boards which don't have KMS output. Drop this call, as there is a correctly guarded one next to the one being removed. Fixes: 506efcba3129 ("drm/msm: carve out KMS code from msm_drv.c") Signed-off-by: Dmitry Baryshkov Reviewed-by: Abhinav Kumar Patchwork: https://patchwork.freedesktop.org/patch/566299/ Link: https://lore.kernel.org/r/20231107111413.2212942-1-dmitry.baryshkov@linaro.org Signed-off-by: Abhinav Kumar --- drivers/gpu/drm/msm/msm_drv.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/gpu/drm/msm/msm_drv.c b/drivers/gpu/drm/msm/msm_drv.c index b61ccea05327..841f9c102b28 100644 --- a/drivers/gpu/drm/msm/msm_drv.c +++ b/drivers/gpu/drm/msm/msm_drv.c @@ -286,8 +286,6 @@ static int msm_drm_init(struct device *dev, const struct drm_driver *drv) if (ret) goto err_msm_uninit; - drm_kms_helper_poll_init(ddev); - if (priv->kms_init) { drm_kms_helper_poll_init(ddev); msm_fbdev_setup(ddev); -- cgit v1.2.3 From a33b2431d11b4df137bbcfdd5a5adfa054c2479e Mon Sep 17 00:00:00 2001 From: Bjorn Andersson Date: Mon, 30 Oct 2023 16:23:20 -0700 Subject: drm/msm/dpu: Add missing safe_lut_tbl in sc8280xp catalog During USB transfers on the SC8280XP __arm_smmu_tlb_sync() is seen to typically take 1-2ms to complete. As expected this results in poor performance, something that has been mitigated by proposing running the iommu in non-strict mode (boot with iommu.strict=0). This turns out to be related to the SAFE logic, and programming the QOS SAFE values in the DPU (per suggestion from Rob and Doug) reduces the TLB sync time to below 10us, which means significant less time spent with interrupts disabled and a significant boost in throughput. Fixes: 4a352c2fc15a ("drm/msm/dpu: Introduce SC8280XP") Cc: stable@vger.kernel.org Suggested-by: Doug Anderson Suggested-by: Rob Clark Signed-off-by: Bjorn Andersson Tested-by: Johan Hovold Tested-by: Steev Klimaszewski Reviewed-by: Abhinav Kumar Patchwork: https://patchwork.freedesktop.org/patch/565094/ Link: https://lore.kernel.org/r/20231030-sc8280xp-dpu-safe-lut-v1-1-6d485d7b428f@quicinc.com Signed-off-by: Abhinav Kumar --- drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_8_0_sc8280xp.h | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_8_0_sc8280xp.h b/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_8_0_sc8280xp.h index 1ccd1edd693c..4c0528794e7a 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_8_0_sc8280xp.h +++ b/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_8_0_sc8280xp.h @@ -406,6 +406,7 @@ static const struct dpu_perf_cfg sc8280xp_perf_data = { .min_llcc_ib = 0, .min_dram_ib = 800000, .danger_lut_tbl = {0xf, 0xffff, 0x0}, + .safe_lut_tbl = {0xfe00, 0xfe00, 0xffff}, .qos_lut_tbl = { {.nentry = ARRAY_SIZE(sc8180x_qos_linear), .entries = sc8180x_qos_linear -- cgit v1.2.3 From ebfa85c504cb34f2fd3257c6f5d54158a0ff1bf6 Mon Sep 17 00:00:00 2001 From: Abel Vesa Date: Wed, 25 Oct 2023 12:23:09 +0300 Subject: drm/msm/dp: don't touch DP subconnector property in eDP case In case of the eDP connection there is no subconnetor and as such no subconnector property. Put drm_dp_set_subconnector_property() calls under the !is_edp condition. Fixes: bfcc3d8f94f4 ("drm/msm/dp: support setting the DP subconnector type") Signed-off-by: Abel Vesa Signed-off-by: Dmitry Baryshkov Reviewed-by: Abhinav Kumar Tested-by: Jessica Zhang # SC7280 Reviewed-by: Johan Hovold Tested-by: Johan Hovold Patchwork: https://patchwork.freedesktop.org/patch/564284/ Link: https://lore.kernel.org/r/20231025092711.851168-2-dmitry.baryshkov@linaro.org Signed-off-by: Abhinav Kumar --- drivers/gpu/drm/msm/dp/dp_display.c | 15 ++++++++++----- 1 file changed, 10 insertions(+), 5 deletions(-) diff --git a/drivers/gpu/drm/msm/dp/dp_display.c b/drivers/gpu/drm/msm/dp/dp_display.c index 17bfa72727aa..165e4a51d52f 100644 --- a/drivers/gpu/drm/msm/dp/dp_display.c +++ b/drivers/gpu/drm/msm/dp/dp_display.c @@ -365,9 +365,11 @@ static int dp_display_send_hpd_notification(struct dp_display_private *dp, /* reset video pattern flag on disconnect */ if (!hpd) { dp->panel->video_test = false; - drm_dp_set_subconnector_property(dp->dp_display.connector, - connector_status_disconnected, - dp->panel->dpcd, dp->panel->downstream_ports); + if (!dp->dp_display.is_edp) + drm_dp_set_subconnector_property(dp->dp_display.connector, + connector_status_disconnected, + dp->panel->dpcd, + dp->panel->downstream_ports); } dp->dp_display.is_connected = hpd; @@ -396,8 +398,11 @@ static int dp_display_process_hpd_high(struct dp_display_private *dp) dp_link_process_request(dp->link); - drm_dp_set_subconnector_property(dp->dp_display.connector, connector_status_connected, - dp->panel->dpcd, dp->panel->downstream_ports); + if (!dp->dp_display.is_edp) + drm_dp_set_subconnector_property(dp->dp_display.connector, + connector_status_connected, + dp->panel->dpcd, + dp->panel->downstream_ports); edid = dp->panel->edid; -- cgit v1.2.3 From 21133266ca12f82b6e59c9711258cca2097c167c Mon Sep 17 00:00:00 2001 From: Dmitry Baryshkov Date: Wed, 25 Oct 2023 12:23:10 +0300 Subject: drm/msm/dp: attach the DP subconnector property While developing and testing the commit bfcc3d8f94f4 ("drm/msm/dp: support setting the DP subconnector type") I had the patch [1] in my tree. I haven't noticed that it was a dependency for the commit in question. Mea culpa. Since the patch has not landed yet (and even was not reviewed) and since one of the bridges erroneously uses USB connector type instead of DP, attach the property directly from the MSM DP driver. This fixes the following oops on DP HPD event: drm_object_property_set_value (drivers/gpu/drm/drm_mode_object.c:288) dp_display_process_hpd_high (drivers/gpu/drm/msm/dp/dp_display.c:402) dp_hpd_plug_handle.isra.0 (drivers/gpu/drm/msm/dp/dp_display.c:604) hpd_event_thread (drivers/gpu/drm/msm/dp/dp_display.c:1110) kthread (kernel/kthread.c:388) ret_from_fork (arch/arm64/kernel/entry.S:858) [1] https://patchwork.freedesktop.org/patch/555530/ Fixes: bfcc3d8f94f4 ("drm/msm/dp: support setting the DP subconnector type") Reviewed-by: Abhinav Kumar Signed-off-by: Dmitry Baryshkov Tested-by: Jessica Zhang # SC7280 Reviewed-by: Johan Hovold Tested-by: Johan Hovold Patchwork: https://patchwork.freedesktop.org/patch/564286/ Link: https://lore.kernel.org/r/20231025092711.851168-3-dmitry.baryshkov@linaro.org Signed-off-by: Abhinav Kumar --- drivers/gpu/drm/msm/dp/dp_drm.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/gpu/drm/msm/dp/dp_drm.c b/drivers/gpu/drm/msm/dp/dp_drm.c index 40e7344180e3..e3bdd7dd4cdc 100644 --- a/drivers/gpu/drm/msm/dp/dp_drm.c +++ b/drivers/gpu/drm/msm/dp/dp_drm.c @@ -345,6 +345,9 @@ struct drm_connector *dp_drm_connector_init(struct msm_dp *dp_display, struct dr if (IS_ERR(connector)) return connector; + if (!dp_display->is_edp) + drm_connector_attach_dp_subconnector_property(connector); + drm_connector_attach_encoder(connector, encoder); return connector; -- cgit v1.2.3 From e80ed63affc9a9b4aacb44180ecd7ed601839599 Mon Sep 17 00:00:00 2001 From: Conor Dooley Date: Tue, 24 Oct 2023 09:20:35 +0100 Subject: riscv: dts: sophgo: remove address-cells from intc node A recent submission [1] from Rob has added additionalProperties: false to the interrupt-controller child node of RISC-V cpus, highlighting that the new cv1800b DT has been incorrectly using #address-cells. It has no child nodes, so #address-cells is not needed. Remove it. Link: https://patchwork.kernel.org/project/linux-riscv/patch/20230915201946.4184468-1-robh@kernel.org/ [1] Fixes: c3dffa879cca ("riscv: dts: sophgo: add initial CV1800B SoC device tree") Reviewed-by: Jisheng Zhang Acked-by: Chen Wang Signed-off-by: Conor Dooley --- arch/riscv/boot/dts/sophgo/cv1800b.dtsi | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/riscv/boot/dts/sophgo/cv1800b.dtsi b/arch/riscv/boot/dts/sophgo/cv1800b.dtsi index df40e87ee063..aec6401a467b 100644 --- a/arch/riscv/boot/dts/sophgo/cv1800b.dtsi +++ b/arch/riscv/boot/dts/sophgo/cv1800b.dtsi @@ -34,7 +34,6 @@ cpu0_intc: interrupt-controller { compatible = "riscv,cpu-intc"; interrupt-controller; - #address-cells = <0>; #interrupt-cells = <1>; }; }; -- cgit v1.2.3 From ba276ce5865b5a22ee96c4c5664bfefd9c1bb593 Mon Sep 17 00:00:00 2001 From: Kent Overstreet Date: Tue, 14 Nov 2023 19:11:04 -0500 Subject: bcachefs: Fix missing locking for dentry->d_parent access Reported-by: Al Viro Signed-off-by: Kent Overstreet --- fs/bcachefs/xattr.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/fs/bcachefs/xattr.c b/fs/bcachefs/xattr.c index a39ff0c296ec..79d982674c18 100644 --- a/fs/bcachefs/xattr.c +++ b/fs/bcachefs/xattr.c @@ -552,6 +552,14 @@ static int bch2_xattr_bcachefs_set(const struct xattr_handler *handler, s.v = v + 1; s.defined = true; } else { + /* + * Check if this option was set on the parent - if so, switched + * back to inheriting from the parent: + * + * rename() also has to deal with keeping inherited options up + * to date - see bch2_reinherit_attrs() + */ + spin_lock(&dentry->d_lock); if (!IS_ROOT(dentry)) { struct bch_inode_info *dir = to_bch_ei(d_inode(dentry->d_parent)); @@ -560,6 +568,7 @@ static int bch2_xattr_bcachefs_set(const struct xattr_handler *handler, } else { s.v = 0; } + spin_unlock(&dentry->d_lock); s.defined = false; } -- cgit v1.2.3 From ccab434e674ca95d483788b1895a70c21b7f016a Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Wed, 15 Nov 2023 11:08:57 +0100 Subject: usb: aqc111: check packet for fixup for true limit If a device sends a packet that is inbetween 0 and sizeof(u64) the value passed to skb_trim() as length will wrap around ending up as some very large value. The driver will then proceed to parse the header located at that position, which will either oops or process some random value. The fix is to check against sizeof(u64) rather than 0, which the driver currently does. The issue exists since the introduction of the driver. Signed-off-by: Oliver Neukum Signed-off-by: David S. Miller --- drivers/net/usb/aqc111.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/net/usb/aqc111.c b/drivers/net/usb/aqc111.c index a017e9de2119..7b8afa589a53 100644 --- a/drivers/net/usb/aqc111.c +++ b/drivers/net/usb/aqc111.c @@ -1079,17 +1079,17 @@ static int aqc111_rx_fixup(struct usbnet *dev, struct sk_buff *skb) u16 pkt_count = 0; u64 desc_hdr = 0; u16 vlan_tag = 0; - u32 skb_len = 0; + u32 skb_len; if (!skb) goto err; - if (skb->len == 0) + skb_len = skb->len; + if (skb_len < sizeof(desc_hdr)) goto err; - skb_len = skb->len; /* RX Descriptor Header */ - skb_trim(skb, skb->len - sizeof(desc_hdr)); + skb_trim(skb, skb_len - sizeof(desc_hdr)); desc_hdr = le64_to_cpup((u64 *)skb_tail_pointer(skb)); /* Check these packets */ -- cgit v1.2.3 From 7fbd5fc2b35a8f559a6b380dfa9bcd964a758186 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Wed, 15 Nov 2023 11:53:31 +0100 Subject: stmmac: dwmac-loongson: Add architecture dependency Only present the DWMAC_LOONGSON option on architectures where it can actually be used. This follows the same logic as the DWMAC_INTEL option. Signed-off-by: Jean Delvare Cc: Keguang Zhang Reviewed-by: Simon Horman Signed-off-by: David S. Miller --- drivers/net/ethernet/stmicro/stmmac/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/stmicro/stmmac/Kconfig b/drivers/net/ethernet/stmicro/stmmac/Kconfig index a2b9e289aa36..85dcda51df05 100644 --- a/drivers/net/ethernet/stmicro/stmmac/Kconfig +++ b/drivers/net/ethernet/stmicro/stmmac/Kconfig @@ -280,7 +280,7 @@ config DWMAC_INTEL config DWMAC_LOONGSON tristate "Loongson PCI DWMAC support" default MACH_LOONGSON64 - depends on STMMAC_ETH && PCI + depends on (MACH_LOONGSON64 || COMPILE_TEST) && STMMAC_ETH && PCI depends on COMMON_CLK help This selects the LOONGSON PCI bus support for the stmmac driver, -- cgit v1.2.3 From 0c3bd086d12d185650d095a906662593ec607bd0 Mon Sep 17 00:00:00 2001 From: David Howells Date: Wed, 15 Nov 2023 17:15:40 +0000 Subject: rxrpc: Fix some minor issues with bundle tracing Fix some superficial issues with the tracing of rxrpc_bundle structs, including: (1) Set the debug_id when the bundle is allocated rather than when it is set up so that the "NEW" trace line displays the correct bundle ID. (2) Show the refcount when emitting the "FREE" traceline. Signed-off-by: David Howells cc: Marc Dionne cc: "David S. Miller" cc: Eric Dumazet cc: Jakub Kicinski cc: Paolo Abeni cc: linux-afs@lists.infradead.org cc: netdev@vger.kernel.org Signed-off-by: David S. Miller --- net/rxrpc/conn_client.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/net/rxrpc/conn_client.c b/net/rxrpc/conn_client.c index 981ca5b98bcb..1d95f8bc769f 100644 --- a/net/rxrpc/conn_client.c +++ b/net/rxrpc/conn_client.c @@ -73,6 +73,7 @@ static void rxrpc_destroy_client_conn_ids(struct rxrpc_local *local) static struct rxrpc_bundle *rxrpc_alloc_bundle(struct rxrpc_call *call, gfp_t gfp) { + static atomic_t rxrpc_bundle_id; struct rxrpc_bundle *bundle; bundle = kzalloc(sizeof(*bundle), gfp); @@ -85,6 +86,7 @@ static struct rxrpc_bundle *rxrpc_alloc_bundle(struct rxrpc_call *call, bundle->upgrade = test_bit(RXRPC_CALL_UPGRADE, &call->flags); bundle->service_id = call->dest_srx.srx_service; bundle->security_level = call->security_level; + bundle->debug_id = atomic_inc_return(&rxrpc_bundle_id); refcount_set(&bundle->ref, 1); atomic_set(&bundle->active, 1); INIT_LIST_HEAD(&bundle->waiting_calls); @@ -105,7 +107,8 @@ struct rxrpc_bundle *rxrpc_get_bundle(struct rxrpc_bundle *bundle, static void rxrpc_free_bundle(struct rxrpc_bundle *bundle) { - trace_rxrpc_bundle(bundle->debug_id, 1, rxrpc_bundle_free); + trace_rxrpc_bundle(bundle->debug_id, refcount_read(&bundle->ref), + rxrpc_bundle_free); rxrpc_put_peer(bundle->peer, rxrpc_peer_put_bundle); key_put(bundle->key); kfree(bundle); @@ -239,7 +242,6 @@ dont_reuse: */ int rxrpc_look_up_bundle(struct rxrpc_call *call, gfp_t gfp) { - static atomic_t rxrpc_bundle_id; struct rxrpc_bundle *bundle, *candidate; struct rxrpc_local *local = call->local; struct rb_node *p, **pp, *parent; @@ -306,7 +308,6 @@ int rxrpc_look_up_bundle(struct rxrpc_call *call, gfp_t gfp) } _debug("new bundle"); - candidate->debug_id = atomic_inc_return(&rxrpc_bundle_id); rb_link_node(&candidate->local_node, parent, pp); rb_insert_color(&candidate->local_node, &local->client_bundles); call->bundle = rxrpc_get_bundle(candidate, rxrpc_bundle_get_client_call); -- cgit v1.2.3 From d565fa4300d9ebd5ba3bbd259ce841f8dab609d6 Mon Sep 17 00:00:00 2001 From: Gerd Bayer Date: Wed, 15 Nov 2023 16:59:58 +0100 Subject: s390/ism: ism driver implies smc protocol Since commit a72178cfe855 ("net/smc: Fix dependency of SMC on ISM") you can build the ism code without selecting the SMC network protocol. That leaves some ism functions be reported as unused. Move these functions under the conditional compile with CONFIG_SMC. Also codify the suggestion to also configure the SMC protocol in ism's Kconfig - but with an "imply" rather than a "select" as SMC depends on other config options and allow for a deliberate decision not to build SMC. Also, mention that in ISM's help. Fixes: a72178cfe855 ("net/smc: Fix dependency of SMC on ISM") Reported-by: Randy Dunlap Closes: https://lore.kernel.org/netdev/afd142a2-1fa0-46b9-8b2d-7652d41d3ab8@infradead.org/ Signed-off-by: Gerd Bayer Reviewed-by: Wenjia Zhang Reviewed-by: Simon Horman Acked-by: Randy Dunlap Tested-by: Randy Dunlap # build-tested Signed-off-by: David S. Miller --- drivers/s390/net/Kconfig | 3 +- drivers/s390/net/ism_drv.c | 93 +++++++++++++++++++++++----------------------- 2 files changed, 48 insertions(+), 48 deletions(-) diff --git a/drivers/s390/net/Kconfig b/drivers/s390/net/Kconfig index 4902d45e929c..c61e6427384c 100644 --- a/drivers/s390/net/Kconfig +++ b/drivers/s390/net/Kconfig @@ -103,10 +103,11 @@ config CCWGROUP config ISM tristate "Support for ISM vPCI Adapter" depends on PCI + imply SMC default n help Select this option if you want to use the Internal Shared Memory - vPCI Adapter. + vPCI Adapter. The adapter can be used with the SMC network protocol. To compile as a module choose M. The module name is ism. If unsure, choose N. diff --git a/drivers/s390/net/ism_drv.c b/drivers/s390/net/ism_drv.c index 6df7f377d2f9..81aabbfbbe2c 100644 --- a/drivers/s390/net/ism_drv.c +++ b/drivers/s390/net/ism_drv.c @@ -30,7 +30,6 @@ static const struct pci_device_id ism_device_table[] = { MODULE_DEVICE_TABLE(pci, ism_device_table); static debug_info_t *ism_debug_info; -static const struct smcd_ops ism_ops; #define NO_CLIENT 0xff /* must be >= MAX_CLIENTS */ static struct ism_client *clients[MAX_CLIENTS]; /* use an array rather than */ @@ -289,22 +288,6 @@ out: return ret; } -static int ism_query_rgid(struct ism_dev *ism, u64 rgid, u32 vid_valid, - u32 vid) -{ - union ism_query_rgid cmd; - - memset(&cmd, 0, sizeof(cmd)); - cmd.request.hdr.cmd = ISM_QUERY_RGID; - cmd.request.hdr.len = sizeof(cmd.request); - - cmd.request.rgid = rgid; - cmd.request.vlan_valid = vid_valid; - cmd.request.vlan_id = vid; - - return ism_cmd(ism, &cmd); -} - static void ism_free_dmb(struct ism_dev *ism, struct ism_dmb *dmb) { clear_bit(dmb->sba_idx, ism->sba_bitmap); @@ -429,23 +412,6 @@ static int ism_del_vlan_id(struct ism_dev *ism, u64 vlan_id) return ism_cmd(ism, &cmd); } -static int ism_signal_ieq(struct ism_dev *ism, u64 rgid, u32 trigger_irq, - u32 event_code, u64 info) -{ - union ism_sig_ieq cmd; - - memset(&cmd, 0, sizeof(cmd)); - cmd.request.hdr.cmd = ISM_SIGNAL_IEQ; - cmd.request.hdr.len = sizeof(cmd.request); - - cmd.request.rgid = rgid; - cmd.request.trigger_irq = trigger_irq; - cmd.request.event_code = event_code; - cmd.request.info = info; - - return ism_cmd(ism, &cmd); -} - static unsigned int max_bytes(unsigned int start, unsigned int len, unsigned int boundary) { @@ -503,14 +469,6 @@ u8 *ism_get_seid(void) } EXPORT_SYMBOL_GPL(ism_get_seid); -static u16 ism_get_chid(struct ism_dev *ism) -{ - if (!ism || !ism->pdev) - return 0; - - return to_zpci(ism->pdev)->pchid; -} - static void ism_handle_event(struct ism_dev *ism) { struct ism_event *entry; @@ -569,11 +527,6 @@ static irqreturn_t ism_handle_irq(int irq, void *data) return IRQ_HANDLED; } -static u64 ism_get_local_gid(struct ism_dev *ism) -{ - return ism->local_gid; -} - static int ism_dev_init(struct ism_dev *ism) { struct pci_dev *pdev = ism->pdev; @@ -774,6 +727,22 @@ module_exit(ism_exit); /*************************** SMC-D Implementation *****************************/ #if IS_ENABLED(CONFIG_SMC) +static int ism_query_rgid(struct ism_dev *ism, u64 rgid, u32 vid_valid, + u32 vid) +{ + union ism_query_rgid cmd; + + memset(&cmd, 0, sizeof(cmd)); + cmd.request.hdr.cmd = ISM_QUERY_RGID; + cmd.request.hdr.len = sizeof(cmd.request); + + cmd.request.rgid = rgid; + cmd.request.vlan_valid = vid_valid; + cmd.request.vlan_id = vid; + + return ism_cmd(ism, &cmd); +} + static int smcd_query_rgid(struct smcd_dev *smcd, u64 rgid, u32 vid_valid, u32 vid) { @@ -811,6 +780,23 @@ static int smcd_reset_vlan_required(struct smcd_dev *smcd) return ism_cmd_simple(smcd->priv, ISM_RESET_VLAN); } +static int ism_signal_ieq(struct ism_dev *ism, u64 rgid, u32 trigger_irq, + u32 event_code, u64 info) +{ + union ism_sig_ieq cmd; + + memset(&cmd, 0, sizeof(cmd)); + cmd.request.hdr.cmd = ISM_SIGNAL_IEQ; + cmd.request.hdr.len = sizeof(cmd.request); + + cmd.request.rgid = rgid; + cmd.request.trigger_irq = trigger_irq; + cmd.request.event_code = event_code; + cmd.request.info = info; + + return ism_cmd(ism, &cmd); +} + static int smcd_signal_ieq(struct smcd_dev *smcd, u64 rgid, u32 trigger_irq, u32 event_code, u64 info) { @@ -830,11 +816,24 @@ static int smcd_supports_v2(void) SYSTEM_EID.type[0] != '0'; } +static u64 ism_get_local_gid(struct ism_dev *ism) +{ + return ism->local_gid; +} + static u64 smcd_get_local_gid(struct smcd_dev *smcd) { return ism_get_local_gid(smcd->priv); } +static u16 ism_get_chid(struct ism_dev *ism) +{ + if (!ism || !ism->pdev) + return 0; + + return to_zpci(ism->pdev)->pchid; +} + static u16 smcd_get_chid(struct smcd_dev *smcd) { return ism_get_chid(smcd->priv); -- cgit v1.2.3 From 75a50c4f5b957a34dedb7c8cce52b582a9162828 Mon Sep 17 00:00:00 2001 From: Paolo Abeni Date: Thu, 16 Nov 2023 18:01:41 +0100 Subject: kselftest: rtnetlink: fix ip route command typo The blamed commit below introduced a typo causing 'gretap' test-case failures: ./rtnetlink.sh -t kci_test_gretap -v COMMAND: ip link add name test-dummy0 type dummy COMMAND: ip link set test-dummy0 up COMMAND: ip netns add testns COMMAND: ip link help gretap 2>&1 | grep -q '^Usage:' COMMAND: ip -netns testns link add dev gretap00 type gretap seq key 102 local 172.16.1.100 remote 172.16.1.200 COMMAND: ip -netns testns addr add dev gretap00 10.1.1.100/24 COMMAND: ip -netns testns link set dev gretap00 ups Error: either "dev" is duplicate, or "ups" is a garbage. COMMAND: ip -netns testns link del gretap00 COMMAND: ip -netns testns link add dev gretap00 type gretap external COMMAND: ip -netns testns link del gretap00 FAIL: gretap Fix it by using the correct keyword. Fixes: 9c2a19f71515 ("kselftest: rtnetlink.sh: add verbose flag") Signed-off-by: Paolo Abeni Reviewed-by: Hangbin Liu Signed-off-by: David S. Miller --- tools/testing/selftests/net/rtnetlink.sh | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/net/rtnetlink.sh b/tools/testing/selftests/net/rtnetlink.sh index 5f2b3f6c0d74..38be9706c45f 100755 --- a/tools/testing/selftests/net/rtnetlink.sh +++ b/tools/testing/selftests/net/rtnetlink.sh @@ -859,7 +859,7 @@ kci_test_gretap() run_cmd ip -netns "$testns" addr add dev "$DEV_NS" 10.1.1.100/24 - run_cmd ip -netns "$testns" link set dev $DEV_NS ups + run_cmd ip -netns "$testns" link set dev $DEV_NS up run_cmd ip -netns "$testns" link del "$DEV_NS" # test external mode -- cgit v1.2.3 From 3798680f2fbbe0ca3ab6138b34e0d161c36497ee Mon Sep 17 00:00:00 2001 From: David Howells Date: Thu, 16 Nov 2023 13:12:58 +0000 Subject: rxrpc: Fix RTT determination to use any ACK as a source Fix RTT determination to be able to use any type of ACK as the response from which RTT can be calculated provided its ack.serial is non-zero and matches the serial number of an outgoing DATA or ACK packet. This shouldn't be limited to REQUESTED-type ACKs as these can have other types substituted for them for things like duplicate or out-of-order packets. Fixes: 4700c4d80b7b ("rxrpc: Fix loss of RTT samples due to interposed ACK") Signed-off-by: David Howells cc: Marc Dionne cc: "David S. Miller" cc: Eric Dumazet cc: Jakub Kicinski cc: Paolo Abeni cc: linux-afs@lists.infradead.org cc: netdev@vger.kernel.org Signed-off-by: David S. Miller --- include/trace/events/rxrpc.h | 2 +- net/rxrpc/input.c | 35 ++++++++++++++++------------------- 2 files changed, 17 insertions(+), 20 deletions(-) diff --git a/include/trace/events/rxrpc.h b/include/trace/events/rxrpc.h index 4c53a5ef6257..f7e537f64db4 100644 --- a/include/trace/events/rxrpc.h +++ b/include/trace/events/rxrpc.h @@ -328,7 +328,7 @@ E_(rxrpc_rtt_tx_ping, "PING") #define rxrpc_rtt_rx_traces \ - EM(rxrpc_rtt_rx_cancel, "CNCL") \ + EM(rxrpc_rtt_rx_other_ack, "OACK") \ EM(rxrpc_rtt_rx_obsolete, "OBSL") \ EM(rxrpc_rtt_rx_lost, "LOST") \ EM(rxrpc_rtt_rx_ping_response, "PONG") \ diff --git a/net/rxrpc/input.c b/net/rxrpc/input.c index 030d64f282f3..3f9594d12519 100644 --- a/net/rxrpc/input.c +++ b/net/rxrpc/input.c @@ -643,12 +643,8 @@ static void rxrpc_complete_rtt_probe(struct rxrpc_call *call, clear_bit(i + RXRPC_CALL_RTT_PEND_SHIFT, &call->rtt_avail); smp_mb(); /* Read data before setting avail bit */ set_bit(i, &call->rtt_avail); - if (type != rxrpc_rtt_rx_cancel) - rxrpc_peer_add_rtt(call, type, i, acked_serial, ack_serial, - sent_at, resp_time); - else - trace_rxrpc_rtt_rx(call, rxrpc_rtt_rx_cancel, i, - orig_serial, acked_serial, 0, 0); + rxrpc_peer_add_rtt(call, type, i, acked_serial, ack_serial, + sent_at, resp_time); matched = true; } @@ -801,20 +797,21 @@ static void rxrpc_input_ack(struct rxrpc_call *call, struct sk_buff *skb) summary.ack_reason, nr_acks); rxrpc_inc_stat(call->rxnet, stat_rx_acks[ack.reason]); - switch (ack.reason) { - case RXRPC_ACK_PING_RESPONSE: - rxrpc_complete_rtt_probe(call, skb->tstamp, acked_serial, ack_serial, - rxrpc_rtt_rx_ping_response); - break; - case RXRPC_ACK_REQUESTED: - rxrpc_complete_rtt_probe(call, skb->tstamp, acked_serial, ack_serial, - rxrpc_rtt_rx_requested_ack); - break; - default: - if (acked_serial != 0) + if (acked_serial != 0) { + switch (ack.reason) { + case RXRPC_ACK_PING_RESPONSE: rxrpc_complete_rtt_probe(call, skb->tstamp, acked_serial, ack_serial, - rxrpc_rtt_rx_cancel); - break; + rxrpc_rtt_rx_ping_response); + break; + case RXRPC_ACK_REQUESTED: + rxrpc_complete_rtt_probe(call, skb->tstamp, acked_serial, ack_serial, + rxrpc_rtt_rx_requested_ack); + break; + default: + rxrpc_complete_rtt_probe(call, skb->tstamp, acked_serial, ack_serial, + rxrpc_rtt_rx_other_ack); + break; + } } if (ack.reason == RXRPC_ACK_PING) { -- cgit v1.2.3 From 1a01319feef7047aa2ba400ffa3e047776aa29ca Mon Sep 17 00:00:00 2001 From: David Howells Date: Thu, 16 Nov 2023 13:12:59 +0000 Subject: rxrpc: Defer the response to a PING ACK until we've parsed it Defer the generation of a PING RESPONSE ACK in response to a PING ACK until we've parsed the PING ACK so that we pick up any changes to the packet queue so that we can update ackinfo. This is also applied to an ACK generated in response to an ACK with the REQUEST_ACK flag set. Note that whilst the problem was added in commit 248f219cb8bc, it didn't really matter at that point because the ACK was proposed in softirq mode and generated asynchronously later in process context, taking the latest values at the time. But this fix is only needed since the move to parse incoming packets in an I/O thread rather than in softirq and generate the ACK at point of proposal (b0346843b1076b34a0278ff601f8f287535cb064). Fixes: 248f219cb8bc ("rxrpc: Rewrite the data and ack handling code") Signed-off-by: David Howells cc: Marc Dionne cc: "David S. Miller" cc: Eric Dumazet cc: Jakub Kicinski cc: Paolo Abeni cc: linux-afs@lists.infradead.org cc: netdev@vger.kernel.org Signed-off-by: David S. Miller --- net/rxrpc/input.c | 26 +++++++++++++------------- 1 file changed, 13 insertions(+), 13 deletions(-) diff --git a/net/rxrpc/input.c b/net/rxrpc/input.c index 3f9594d12519..92495e73b869 100644 --- a/net/rxrpc/input.c +++ b/net/rxrpc/input.c @@ -814,14 +814,6 @@ static void rxrpc_input_ack(struct rxrpc_call *call, struct sk_buff *skb) } } - if (ack.reason == RXRPC_ACK_PING) { - rxrpc_send_ACK(call, RXRPC_ACK_PING_RESPONSE, ack_serial, - rxrpc_propose_ack_respond_to_ping); - } else if (sp->hdr.flags & RXRPC_REQUEST_ACK) { - rxrpc_send_ACK(call, RXRPC_ACK_REQUESTED, ack_serial, - rxrpc_propose_ack_respond_to_ack); - } - /* If we get an EXCEEDS_WINDOW ACK from the server, it probably * indicates that the client address changed due to NAT. The server * lost the call because it switched to a different peer. @@ -832,7 +824,7 @@ static void rxrpc_input_ack(struct rxrpc_call *call, struct sk_buff *skb) rxrpc_is_client_call(call)) { rxrpc_set_call_completion(call, RXRPC_CALL_REMOTELY_ABORTED, 0, -ENETRESET); - return; + goto send_response; } /* If we get an OUT_OF_SEQUENCE ACK from the server, that can also @@ -846,7 +838,7 @@ static void rxrpc_input_ack(struct rxrpc_call *call, struct sk_buff *skb) rxrpc_is_client_call(call)) { rxrpc_set_call_completion(call, RXRPC_CALL_REMOTELY_ABORTED, 0, -ENETRESET); - return; + goto send_response; } /* Discard any out-of-order or duplicate ACKs (outside lock). */ @@ -854,7 +846,7 @@ static void rxrpc_input_ack(struct rxrpc_call *call, struct sk_buff *skb) trace_rxrpc_rx_discard_ack(call->debug_id, ack_serial, first_soft_ack, call->acks_first_seq, prev_pkt, call->acks_prev_seq); - return; + goto send_response; } info.rxMTU = 0; @@ -894,7 +886,7 @@ static void rxrpc_input_ack(struct rxrpc_call *call, struct sk_buff *skb) case RXRPC_CALL_SERVER_AWAIT_ACK: break; default: - return; + goto send_response; } if (before(hard_ack, call->acks_hard_ack) || @@ -906,7 +898,7 @@ static void rxrpc_input_ack(struct rxrpc_call *call, struct sk_buff *skb) if (after(hard_ack, call->acks_hard_ack)) { if (rxrpc_rotate_tx_window(call, hard_ack, &summary)) { rxrpc_end_tx_phase(call, false, rxrpc_eproto_unexpected_ack); - return; + goto send_response; } } @@ -924,6 +916,14 @@ static void rxrpc_input_ack(struct rxrpc_call *call, struct sk_buff *skb) rxrpc_propose_ack_ping_for_lost_reply); rxrpc_congestion_management(call, skb, &summary, acked_serial); + +send_response: + if (ack.reason == RXRPC_ACK_PING) + rxrpc_send_ACK(call, RXRPC_ACK_PING_RESPONSE, ack_serial, + rxrpc_propose_ack_respond_to_ping); + else if (sp->hdr.flags & RXRPC_REQUEST_ACK) + rxrpc_send_ACK(call, RXRPC_ACK_REQUESTED, ack_serial, + rxrpc_propose_ack_respond_to_ack); } /* -- cgit v1.2.3 From 76df934c6d5f5c93ba7a0112b1818620ddc10b19 Mon Sep 17 00:00:00 2001 From: Kees Cook Date: Thu, 16 Nov 2023 12:11:51 -0800 Subject: MAINTAINERS: Add netdev subsystem profile link The netdev subsystem has had a subsystem process document for a while now. Link it appropriately in MAINTAINERS with the P: tag. Cc: Jakub Kicinski Cc: "David S. Miller" Cc: Eric Dumazet Cc: Paolo Abeni Cc: netdev@vger.kernel.org Signed-off-by: Kees Cook Signed-off-by: David S. Miller --- MAINTAINERS | 2 ++ 1 file changed, 2 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index 482d428472e7..80a95878c61d 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -14994,6 +14994,7 @@ M: Jakub Kicinski M: Paolo Abeni L: netdev@vger.kernel.org S: Maintained +P: Documentation/process/maintainer-netdev.rst Q: https://patchwork.kernel.org/project/netdevbpf/list/ T: git git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net.git T: git git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next.git @@ -15045,6 +15046,7 @@ M: Jakub Kicinski M: Paolo Abeni L: netdev@vger.kernel.org S: Maintained +P: Documentation/process/maintainer-netdev.rst Q: https://patchwork.kernel.org/project/netdevbpf/list/ B: mailto:netdev@vger.kernel.org T: git git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net.git -- cgit v1.2.3 From 9e0be3f50c0e8517d0238b62409c20bcb8cd8785 Mon Sep 17 00:00:00 2001 From: Lukas Bulwahn Date: Fri, 10 Nov 2023 13:07:22 +0100 Subject: linux/export: clean up the IA-64 KSYM_FUNC macro With commit cf8e8658100d ("arch: Remove Itanium (IA-64) architecture"), there is no need to keep the IA-64 definition of the KSYM_FUNC macro. Clean up the IA-64 definition of the KSYM_FUNC macro. Signed-off-by: Lukas Bulwahn Reviewed-by: Nathan Chancellor Signed-off-by: Masahiro Yamada --- include/linux/export-internal.h | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/include/linux/export-internal.h b/include/linux/export-internal.h index 45fca09b2319..69501e0ec239 100644 --- a/include/linux/export-internal.h +++ b/include/linux/export-internal.h @@ -50,9 +50,7 @@ " .previous" "\n" \ ) -#ifdef CONFIG_IA64 -#define KSYM_FUNC(name) @fptr(name) -#elif defined(CONFIG_PARISC) && defined(CONFIG_64BIT) +#if defined(CONFIG_PARISC) && defined(CONFIG_64BIT) #define KSYM_FUNC(name) P%name #else #define KSYM_FUNC(name) name -- cgit v1.2.3 From 76020731d4ee897411ce4a73916ed805ea15d946 Mon Sep 17 00:00:00 2001 From: Simon Glass Date: Fri, 10 Nov 2023 17:28:01 -0700 Subject: kbuild: Move the single quotes for image name Add quotes where UIMAGE_NAME is used, rather than where it is defined. This allows the UIMAGE_NAME variable to be set by the user. Signed-off-by: Simon Glass Signed-off-by: Masahiro Yamada --- scripts/Makefile.lib | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/scripts/Makefile.lib b/scripts/Makefile.lib index 68d0134bdbf9..1a965fe68e01 100644 --- a/scripts/Makefile.lib +++ b/scripts/Makefile.lib @@ -487,14 +487,14 @@ UIMAGE_OPTS-y ?= UIMAGE_TYPE ?= kernel UIMAGE_LOADADDR ?= arch_must_set_this UIMAGE_ENTRYADDR ?= $(UIMAGE_LOADADDR) -UIMAGE_NAME ?= 'Linux-$(KERNELRELEASE)' +UIMAGE_NAME ?= Linux-$(KERNELRELEASE) quiet_cmd_uimage = UIMAGE $@ cmd_uimage = $(BASH) $(MKIMAGE) -A $(UIMAGE_ARCH) -O linux \ -C $(UIMAGE_COMPRESSION) $(UIMAGE_OPTS-y) \ -T $(UIMAGE_TYPE) \ -a $(UIMAGE_LOADADDR) -e $(UIMAGE_ENTRYADDR) \ - -n $(UIMAGE_NAME) -d $< $@ + -n '$(UIMAGE_NAME)' -d $< $@ # XZ # --------------------------------------------------------------------------- -- cgit v1.2.3 From ae1eff0349f2e908fc083630e8441ea6dc434dc0 Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Wed, 15 Nov 2023 13:16:53 +0900 Subject: kconfig: fix memory leak from range properties Currently, sym_validate_range() duplicates the range string using xstrdup(), which is overwritten by a subsequent sym_calc_value() call. It results in a memory leak. Instead, only the pointer should be copied. Below is a test case, with a summary from Valgrind. [Test Kconfig] config FOO int "foo" range 10 20 [Test .config] CONFIG_FOO=0 [Before] LEAK SUMMARY: definitely lost: 3 bytes in 1 blocks indirectly lost: 0 bytes in 0 blocks possibly lost: 0 bytes in 0 blocks still reachable: 17,465 bytes in 21 blocks suppressed: 0 bytes in 0 blocks [After] LEAK SUMMARY: definitely lost: 0 bytes in 0 blocks indirectly lost: 0 bytes in 0 blocks possibly lost: 0 bytes in 0 blocks still reachable: 17,462 bytes in 20 blocks suppressed: 0 bytes in 0 blocks Signed-off-by: Masahiro Yamada --- scripts/kconfig/symbol.c | 14 ++++++-------- 1 file changed, 6 insertions(+), 8 deletions(-) diff --git a/scripts/kconfig/symbol.c b/scripts/kconfig/symbol.c index 0572330bf8a7..a76925b46ce6 100644 --- a/scripts/kconfig/symbol.c +++ b/scripts/kconfig/symbol.c @@ -122,9 +122,9 @@ static long long sym_get_range_val(struct symbol *sym, int base) static void sym_validate_range(struct symbol *sym) { struct property *prop; + struct symbol *range_sym; int base; long long val, val2; - char str[64]; switch (sym->type) { case S_INT: @@ -140,17 +140,15 @@ static void sym_validate_range(struct symbol *sym) if (!prop) return; val = strtoll(sym->curr.val, NULL, base); - val2 = sym_get_range_val(prop->expr->left.sym, base); + range_sym = prop->expr->left.sym; + val2 = sym_get_range_val(range_sym, base); if (val >= val2) { - val2 = sym_get_range_val(prop->expr->right.sym, base); + range_sym = prop->expr->right.sym; + val2 = sym_get_range_val(range_sym, base); if (val <= val2) return; } - if (sym->type == S_INT) - sprintf(str, "%lld", val2); - else - sprintf(str, "0x%llx", val2); - sym->curr.val = xstrdup(str); + sym->curr.val = range_sym->curr.val; } static void sym_set_changed(struct symbol *sym) -- cgit v1.2.3 From 1ffa8602e39b89469dc703ebab7a7e44c33da0f7 Mon Sep 17 00:00:00 2001 From: Nicholas Kazlauskas Date: Wed, 13 Sep 2023 16:18:44 -0400 Subject: drm/amd/display: Guard against invalid RPTR/WPTR being set [WHY] HW can return invalid values on register read, guard against these being set and causing us to access memory out of range and page fault. [HOW] Guard at sync_inbox1 and guard at pushing commands. Cc: Mario Limonciello Cc: Alex Deucher Cc: stable@vger.kernel.org Reviewed-by: Hansen Dsouza Acked-by: Alex Hung Signed-off-by: Nicholas Kazlauskas Tested-by: Daniel Wheeler Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/dmub/src/dmub_srv.c | 18 +++++++++++++++--- 1 file changed, 15 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/amd/display/dmub/src/dmub_srv.c b/drivers/gpu/drm/amd/display/dmub/src/dmub_srv.c index e43e8d4bfe37..5d36f3e5dc2b 100644 --- a/drivers/gpu/drm/amd/display/dmub/src/dmub_srv.c +++ b/drivers/gpu/drm/amd/display/dmub/src/dmub_srv.c @@ -707,9 +707,16 @@ enum dmub_status dmub_srv_sync_inbox1(struct dmub_srv *dmub) return DMUB_STATUS_INVALID; if (dmub->hw_funcs.get_inbox1_rptr && dmub->hw_funcs.get_inbox1_wptr) { - dmub->inbox1_rb.rptr = dmub->hw_funcs.get_inbox1_rptr(dmub); - dmub->inbox1_rb.wrpt = dmub->hw_funcs.get_inbox1_wptr(dmub); - dmub->inbox1_last_wptr = dmub->inbox1_rb.wrpt; + uint32_t rptr = dmub->hw_funcs.get_inbox1_rptr(dmub); + uint32_t wptr = dmub->hw_funcs.get_inbox1_wptr(dmub); + + if (rptr > dmub->inbox1_rb.capacity || wptr > dmub->inbox1_rb.capacity) { + return DMUB_STATUS_HW_FAILURE; + } else { + dmub->inbox1_rb.rptr = rptr; + dmub->inbox1_rb.wrpt = wptr; + dmub->inbox1_last_wptr = dmub->inbox1_rb.wrpt; + } } return DMUB_STATUS_OK; @@ -743,6 +750,11 @@ enum dmub_status dmub_srv_cmd_queue(struct dmub_srv *dmub, if (!dmub->hw_init) return DMUB_STATUS_INVALID; + if (dmub->inbox1_rb.rptr > dmub->inbox1_rb.capacity || + dmub->inbox1_rb.wrpt > dmub->inbox1_rb.capacity) { + return DMUB_STATUS_HW_FAILURE; + } + if (dmub_rb_push_front(&dmub->inbox1_rb, cmd)) return DMUB_STATUS_OK; -- cgit v1.2.3 From 0288603040c38ccfeb5342f34a52673366d90038 Mon Sep 17 00:00:00 2001 From: Victor Lu Date: Wed, 4 Oct 2023 14:24:15 -0400 Subject: drm/amdgpu: Do not program VF copy regs in mmhub v1.8 under SRIOV (v2) MC_VM_AGP_* registers should not be programmed by guest driver. v2: move early return outside of loop Signed-off-by: Victor Lu Reviewed-by: Samir Dhume Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/mmhub_v1_8.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/amd/amdgpu/mmhub_v1_8.c b/drivers/gpu/drm/amd/amdgpu/mmhub_v1_8.c index ea142611be1c..9b0146732e13 100644 --- a/drivers/gpu/drm/amd/amdgpu/mmhub_v1_8.c +++ b/drivers/gpu/drm/amd/amdgpu/mmhub_v1_8.c @@ -130,6 +130,9 @@ static void mmhub_v1_8_init_system_aperture_regs(struct amdgpu_device *adev) uint64_t value; int i; + if (amdgpu_sriov_vf(adev)) + return; + inst_mask = adev->aid_mask; for_each_inst(i, inst_mask) { /* Program the AGP BAR */ @@ -139,9 +142,6 @@ static void mmhub_v1_8_init_system_aperture_regs(struct amdgpu_device *adev) WREG32_SOC15(MMHUB, i, regMC_VM_AGP_TOP, adev->gmc.agp_end >> 24); - if (amdgpu_sriov_vf(adev)) - return; - /* Program the system aperture low logical page number. */ WREG32_SOC15(MMHUB, i, regMC_VM_SYSTEM_APERTURE_LOW_ADDR, min(adev->gmc.fb_start, adev->gmc.agp_start) >> 18); -- cgit v1.2.3 From bdb72185d310fc8049c7ea95221d640e9e7165e5 Mon Sep 17 00:00:00 2001 From: Le Ma Date: Mon, 13 Nov 2023 18:05:34 +0800 Subject: drm/amdgpu: finalizing mem_partitions at the end of GMC v9 sw_fini The valid num_mem_partitions is required during ttm pool fini, thus move the cleanup at the end of the function. Signed-off-by: Le Ma Reviewed-by: Hawking Zhang Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/gmc_v9_0.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/amd/amdgpu/gmc_v9_0.c b/drivers/gpu/drm/amd/amdgpu/gmc_v9_0.c index bde25eb4ed8e..c1f2f166f064 100644 --- a/drivers/gpu/drm/amd/amdgpu/gmc_v9_0.c +++ b/drivers/gpu/drm/amd/amdgpu/gmc_v9_0.c @@ -2170,8 +2170,6 @@ static int gmc_v9_0_sw_fini(void *handle) if (amdgpu_ip_version(adev, GC_HWIP, 0) == IP_VERSION(9, 4, 3)) amdgpu_gmc_sysfs_fini(adev); - adev->gmc.num_mem_partitions = 0; - kfree(adev->gmc.mem_partitions); amdgpu_gmc_ras_fini(adev); amdgpu_gem_force_release(adev); @@ -2185,6 +2183,9 @@ static int gmc_v9_0_sw_fini(void *handle) amdgpu_bo_free_kernel(&adev->gmc.pdb0_bo, NULL, &adev->gmc.ptr_pdb0); amdgpu_bo_fini(adev); + adev->gmc.num_mem_partitions = 0; + kfree(adev->gmc.mem_partitions); + return 0; } -- cgit v1.2.3 From 8a0173cd90984835645022bf1997abd1bcd81aae Mon Sep 17 00:00:00 2001 From: Srinivasan Shanmugam Date: Sun, 12 Nov 2023 09:51:19 +0530 Subject: drm/amdgpu: Address member 'ring' not described in 'amdgpu_ vce, uvd_entity_init()' MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Fixes the following: drivers/gpu/drm/amd/amdgpu/amdgpu_vce.c:237: warning: Function parameter or member 'ring' not described in 'amdgpu_vce_entity_init' drivers/gpu/drm/amd/amdgpu/amdgpu_uvd.c:405: warning: Function parameter or member 'ring' not described in 'amdgpu_uvd_entity_init' Cc: Christian König Cc: Alex Deucher Cc: "Pan, Xinhui" Signed-off-by: Srinivasan Shanmugam Reviewed-by: Christian König Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu_uvd.c | 1 + drivers/gpu/drm/amd/amdgpu/amdgpu_vce.c | 1 + 2 files changed, 2 insertions(+) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_uvd.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_uvd.c index 65949cc7abb9..07d930339b07 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_uvd.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_uvd.c @@ -398,6 +398,7 @@ int amdgpu_uvd_sw_fini(struct amdgpu_device *adev) * amdgpu_uvd_entity_init - init entity * * @adev: amdgpu_device pointer + * @ring: amdgpu_ring pointer to check * * Initialize the entity used for handle management in the kernel driver. */ diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_vce.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_vce.c index 0954447f689d..59acf424a078 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_vce.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_vce.c @@ -230,6 +230,7 @@ int amdgpu_vce_sw_fini(struct amdgpu_device *adev) * amdgpu_vce_entity_init - init entity * * @adev: amdgpu_device pointer + * @ring: amdgpu_ring pointer to check * * Initialize the entity used for handle management in the kernel driver. */ -- cgit v1.2.3 From a58555359a9f870543aaddef277c3396159895ce Mon Sep 17 00:00:00 2001 From: Fangzhi Zuo Date: Mon, 23 Oct 2023 13:57:32 -0400 Subject: drm/amd/display: Fix DSC not Enabled on Direct MST Sink [WHY & HOW] For the scenario when a dsc capable MST sink device is directly connected, it needs to use max dsc compression as the link bw constraint. Cc: Mario Limonciello Cc: Alex Deucher Cc: stable@vger.kernel.org Reviewed-by: Roman Li Acked-by: Alex Hung Signed-off-by: Fangzhi Zuo Tested-by: Daniel Wheeler Signed-off-by: Alex Deucher --- .../amd/display/amdgpu_dm/amdgpu_dm_mst_types.c | 29 +++++++++++----------- 1 file changed, 14 insertions(+), 15 deletions(-) diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c index d3b13d362eda..11da0eebee6c 100644 --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c @@ -1604,31 +1604,31 @@ enum dc_status dm_dp_mst_is_port_support_mode( unsigned int upper_link_bw_in_kbps = 0, down_link_bw_in_kbps = 0; unsigned int max_compressed_bw_in_kbps = 0; struct dc_dsc_bw_range bw_range = {0}; - struct drm_dp_mst_topology_mgr *mst_mgr; + uint16_t full_pbn = aconnector->mst_output_port->full_pbn; /* - * check if the mode could be supported if DSC pass-through is supported - * AND check if there enough bandwidth available to support the mode - * with DSC enabled. + * Consider the case with the depth of the mst topology tree is equal or less than 2 + * A. When dsc bitstream can be transmitted along the entire path + * 1. dsc is possible between source and branch/leaf device (common dsc params is possible), AND + * 2. dsc passthrough supported at MST branch, or + * 3. dsc decoding supported at leaf MST device + * Use maximum dsc compression as bw constraint + * B. When dsc bitstream cannot be transmitted along the entire path + * Use native bw as bw constraint */ if (is_dsc_common_config_possible(stream, &bw_range) && - aconnector->mst_output_port->passthrough_aux) { - mst_mgr = aconnector->mst_output_port->mgr; - mutex_lock(&mst_mgr->lock); - + (aconnector->mst_output_port->passthrough_aux || + aconnector->dsc_aux == &aconnector->mst_output_port->aux)) { cur_link_settings = stream->link->verified_link_cap; upper_link_bw_in_kbps = dc_link_bandwidth_kbps(aconnector->dc_link, - &cur_link_settings - ); - down_link_bw_in_kbps = kbps_from_pbn(aconnector->mst_output_port->full_pbn); + &cur_link_settings); + down_link_bw_in_kbps = kbps_from_pbn(full_pbn); /* pick the bottleneck */ end_to_end_bw_in_kbps = min(upper_link_bw_in_kbps, down_link_bw_in_kbps); - mutex_unlock(&mst_mgr->lock); - /* * use the maximum dsc compression bandwidth as the required * bandwidth for the mode @@ -1643,8 +1643,7 @@ enum dc_status dm_dp_mst_is_port_support_mode( /* check if mode could be supported within full_pbn */ bpp = convert_dc_color_depth_into_bpc(stream->timing.display_color_depth) * 3; pbn = drm_dp_calc_pbn_mode(stream->timing.pix_clk_100hz / 10, bpp, false); - - if (pbn > aconnector->mst_output_port->full_pbn) + if (pbn > full_pbn) return DC_FAIL_BANDWIDTH_VALIDATE; } -- cgit v1.2.3 From 50d51374b498457c4dea26779d32ccfed12ddaff Mon Sep 17 00:00:00 2001 From: YuanShang Date: Tue, 31 Oct 2023 10:32:37 +0800 Subject: drm/amdgpu: correct chunk_ptr to a pointer to chunk. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The variable "chunk_ptr" should be a pointer pointing to a struct drm_amdgpu_cs_chunk instead of to a pointer of that. Signed-off-by: YuanShang Reviewed-by: Christian König Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c index df3ecfa9e13f..e50be6500030 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c @@ -207,7 +207,7 @@ static int amdgpu_cs_pass1(struct amdgpu_cs_parser *p, } for (i = 0; i < p->nchunks; i++) { - struct drm_amdgpu_cs_chunk __user **chunk_ptr = NULL; + struct drm_amdgpu_cs_chunk __user *chunk_ptr = NULL; struct drm_amdgpu_cs_chunk user_chunk; uint32_t __user *cdata; -- cgit v1.2.3 From 786c355797b3942725829d02ce9e2e6a9eba11fe Mon Sep 17 00:00:00 2001 From: Asad Kamal Date: Tue, 31 Oct 2023 03:14:02 +0800 Subject: drm/amd/pm: Update metric table for smu v13_0_6 Update pmfw metric table to include pcie instantaneous bandwidth & pcie error counters Signed-off-by: Asad Kamal Reviewed-by: Le Ma Reviewed-by: Lijo Lazar Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/pm/swsmu/inc/pmfw_if/smu_v13_0_6_pmfw.h | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/amd/pm/swsmu/inc/pmfw_if/smu_v13_0_6_pmfw.h b/drivers/gpu/drm/amd/pm/swsmu/inc/pmfw_if/smu_v13_0_6_pmfw.h index dab35d878a90..fef2d290f3f2 100644 --- a/drivers/gpu/drm/amd/pm/swsmu/inc/pmfw_if/smu_v13_0_6_pmfw.h +++ b/drivers/gpu/drm/amd/pm/swsmu/inc/pmfw_if/smu_v13_0_6_pmfw.h @@ -123,7 +123,7 @@ typedef enum { VOLTAGE_GUARDBAND_COUNT } GFX_GUARDBAND_e; -#define SMU_METRICS_TABLE_VERSION 0x8 +#define SMU_METRICS_TABLE_VERSION 0x9 typedef struct __attribute__((packed, aligned(4))) { uint32_t AccumulationCounter; @@ -211,6 +211,14 @@ typedef struct __attribute__((packed, aligned(4))) { //XGMI Data tranfser size uint64_t XgmiReadDataSizeAcc[8];//in KByte uint64_t XgmiWriteDataSizeAcc[8];//in KByte + + //PCIE BW Data and error count + uint32_t PcieBandwidth[4]; + uint32_t PCIeL0ToRecoveryCountAcc; // The Pcie counter itself is accumulated + uint32_t PCIenReplayAAcc; // The Pcie counter itself is accumulated + uint32_t PCIenReplayARolloverCountAcc; // The Pcie counter itself is accumulated + uint32_t PCIeNAKSentCountAcc; // The Pcie counter itself is accumulated + uint32_t PCIeNAKReceivedCountAcc; // The Pcie counter itself is accumulated } MetricsTable_t; #define SMU_VF_METRICS_TABLE_VERSION 0x3 -- cgit v1.2.3 From e4d0be18243ca006258b5c7c148796c0b43505c4 Mon Sep 17 00:00:00 2001 From: Asad Kamal Date: Tue, 14 Nov 2023 16:17:17 +0800 Subject: drm/amd/pm: Fill pcie error counters for gpu v1_4 Fill PCIE error counters & instantaneous bandwidth in gpu metrics v1_4 for smu v_13_0_6 Signed-off-by: Asad Kamal Reviewed-by: Le Ma Reviewed-by: Lijo Lazar Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0_6_ppt.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0_6_ppt.c b/drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0_6_ppt.c index 891605d4975f..84fac499cf0c 100644 --- a/drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0_6_ppt.c +++ b/drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0_6_ppt.c @@ -2095,6 +2095,14 @@ static ssize_t smu_v13_0_6_get_gpu_metrics(struct smu_context *smu, void **table smu_v13_0_6_get_current_pcie_link_speed(smu); gpu_metrics->pcie_bandwidth_acc = SMUQ10_ROUND(metrics->PcieBandwidthAcc[0]); + gpu_metrics->pcie_bandwidth_inst = + SMUQ10_ROUND(metrics->PcieBandwidth[0]); + gpu_metrics->pcie_l0_to_recov_count_acc = + metrics->PCIeL0ToRecoveryCountAcc; + gpu_metrics->pcie_replay_count_acc = + metrics->PCIenReplayAAcc; + gpu_metrics->pcie_replay_rover_count_acc = + metrics->PCIenReplayARolloverCountAcc; } gpu_metrics->system_clock_counter = ktime_get_boottime_ns(); -- cgit v1.2.3 From 9725a4f9eb495bfa6c7f5ccdb49440ff06dba0a1 Mon Sep 17 00:00:00 2001 From: Muhammad Ahmed Date: Tue, 31 Oct 2023 16:03:21 -0400 Subject: drm/amd/display: Add null checks for 8K60 lightup [WHY & HOW] Add some null checks to fix an issue where 8k60 tiled display fails to light up. Cc: Mario Limonciello Cc: Alex Deucher Cc: stable@vger.kernel.org Reviewed-by: Charlene Liu Acked-by: Alex Hung Signed-off-by: Muhammad Ahmed Tested-by: Daniel Wheeler Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/dc/core/dc.c | 2 +- drivers/gpu/drm/amd/display/dc/core/dc_resource.c | 3 +++ 2 files changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/amd/display/dc/core/dc.c b/drivers/gpu/drm/amd/display/dc/core/dc.c index 7b9bf5cb4529..d8f434738212 100644 --- a/drivers/gpu/drm/amd/display/dc/core/dc.c +++ b/drivers/gpu/drm/amd/display/dc/core/dc.c @@ -3178,7 +3178,7 @@ static bool update_planes_and_stream_state(struct dc *dc, struct pipe_ctx *otg_master = resource_get_otg_master_for_stream(&context->res_ctx, context->streams[i]); - if (otg_master->stream->test_pattern.type != DP_TEST_PATTERN_VIDEO_MODE) + if (otg_master && otg_master->stream->test_pattern.type != DP_TEST_PATTERN_VIDEO_MODE) resource_build_test_pattern_params(&context->res_ctx, otg_master); } } diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_resource.c b/drivers/gpu/drm/amd/display/dc/core/dc_resource.c index 1d48278cba96..a1f1d1003992 100644 --- a/drivers/gpu/drm/amd/display/dc/core/dc_resource.c +++ b/drivers/gpu/drm/amd/display/dc/core/dc_resource.c @@ -5190,6 +5190,9 @@ bool dc_resource_acquire_secondary_pipe_for_mpc_odm_legacy( sec_next = sec_pipe->next_odm_pipe; sec_prev = sec_pipe->prev_odm_pipe; + if (pri_pipe == NULL) + return false; + *sec_pipe = *pri_pipe; sec_pipe->top_pipe = sec_top; -- cgit v1.2.3 From b71f4ade1b8900d30c661d6c27f87c35214c398c Mon Sep 17 00:00:00 2001 From: Mario Limonciello Date: Wed, 8 Nov 2023 13:31:57 -0600 Subject: drm/amd/display: fix a NULL pointer dereference in amdgpu_dm_i2c_xfer() When ddc_service_construct() is called, it explicitly checks both the link type and whether there is something on the link which will dictate whether the pin is marked as hw_supported. If the pin isn't set or the link is not set (such as from unloading/reloading amdgpu in an IGT test) then fail the amdgpu_dm_i2c_xfer() call. Cc: stable@vger.kernel.org Fixes: 22676bc500c2 ("drm/amd/display: Fix dmub soft hang for PSR 1") Link: https://github.com/fwupd/fwupd/issues/6327 Signed-off-by: Mario Limonciello Reviewed-by: Harry Wentland Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c index 6f99f6754c11..5ec7acf65ee1 100644 --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c @@ -7481,6 +7481,9 @@ static int amdgpu_dm_i2c_xfer(struct i2c_adapter *i2c_adap, int i; int result = -EIO; + if (!ddc_service->ddc_pin || !ddc_service->ddc_pin->hw_info.hw_supported) + return result; + cmd.payloads = kcalloc(num, sizeof(struct i2c_payload), GFP_KERNEL); if (!cmd.payloads) -- cgit v1.2.3 From 270b301beca58e427a0fda7523a71a9562e644bb Mon Sep 17 00:00:00 2001 From: José Pekkarinen Date: Tue, 14 Nov 2023 17:27:51 +0200 Subject: drm/amd/display: fix NULL dereference MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The following patch will fix a minor issue where a debug message is referencing an struct that has just being checked whether is null or not. This has been noticed by using coccinelle, in the following output: drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_helpers.c:540:25-29: ERROR: aconnector is NULL but dereferenced. Fixes: 5d72e247e58c ("drm/amd/display: switch DC over to the new DRM logging macros") Signed-off-by: José Pekkarinen Signed-off-by: Hamza Mahfooz Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_helpers.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_helpers.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_helpers.c index ed784cf27d39..c7a29bb737e2 100644 --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_helpers.c +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_helpers.c @@ -536,11 +536,8 @@ bool dm_helpers_dp_read_dpcd( struct amdgpu_dm_connector *aconnector = link->priv; - if (!aconnector) { - drm_dbg_dp(aconnector->base.dev, - "Failed to find connector for link!\n"); + if (!aconnector) return false; - } return drm_dp_dpcd_read(&aconnector->dm_dp_aux.aux, address, data, size) == size; -- cgit v1.2.3 From 435f5b369657cffee4b04db1f5805b48599f4dbe Mon Sep 17 00:00:00 2001 From: Tianci Yin Date: Wed, 1 Nov 2023 09:47:13 +0800 Subject: drm/amd/display: Enable fast plane updates on DCN3.2 and above [WHY] When cursor moves across screen boarder, lag cursor observed, since subvp settings need to sync up with vblank that causes cursor updates being delayed. [HOW] Enable fast plane updates on DCN3.2 to fix it. Cc: Mario Limonciello Cc: Alex Deucher Cc: stable@vger.kernel.org Reviewed-by: Aurabindo Pillai Acked-by: Alex Hung Signed-off-by: Tianci Yin Tested-by: Daniel Wheeler Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c index 5ec7acf65ee1..9581510d3740 100644 --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c @@ -9606,14 +9606,14 @@ static bool should_reset_plane(struct drm_atomic_state *state, struct drm_plane *other; struct drm_plane_state *old_other_state, *new_other_state; struct drm_crtc_state *new_crtc_state; + struct amdgpu_device *adev = drm_to_adev(plane->dev); int i; /* - * TODO: Remove this hack once the checks below are sufficient - * enough to determine when we need to reset all the planes on - * the stream. + * TODO: Remove this hack for all asics once it proves that the + * fast updates works fine on DCN3.2+. */ - if (state->allow_modeset) + if (adev->ip_versions[DCE_HWIP][0] < IP_VERSION(3, 2, 0) && state->allow_modeset) return true; /* Exit early if we know that we're adding or removing the plane. */ -- cgit v1.2.3 From 923bbfe6c888812db1088d684bd30c24036226d2 Mon Sep 17 00:00:00 2001 From: Paul Hsieh Date: Wed, 25 Oct 2023 10:53:35 +0800 Subject: drm/amd/display: Clear dpcd_sink_ext_caps if not set [WHY] Some eDP panels' ext caps don't set initial values and the value of dpcd_addr (0x317) is random. It means that sometimes the eDP can be OLED, miniLED and etc, and cause incorrect backlight control interface. [HOW] Add remove_sink_ext_caps to remove sink ext caps (HDR, OLED and etc) Cc: Mario Limonciello Cc: Alex Deucher Cc: stable@vger.kernel.org Reviewed-by: Anthony Koo Acked-by: Alex Hung Signed-off-by: Paul Hsieh Tested-by: Daniel Wheeler Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/dc/dc_types.h | 1 + drivers/gpu/drm/amd/display/dc/link/link_detection.c | 3 +++ 2 files changed, 4 insertions(+) diff --git a/drivers/gpu/drm/amd/display/dc/dc_types.h b/drivers/gpu/drm/amd/display/dc/dc_types.h index cea666ea66c6..fcb825e4f1bb 100644 --- a/drivers/gpu/drm/amd/display/dc/dc_types.h +++ b/drivers/gpu/drm/amd/display/dc/dc_types.h @@ -177,6 +177,7 @@ struct dc_panel_patch { unsigned int disable_fams; unsigned int skip_avmute; unsigned int mst_start_top_delay; + unsigned int remove_sink_ext_caps; }; struct dc_edid_caps { diff --git a/drivers/gpu/drm/amd/display/dc/link/link_detection.c b/drivers/gpu/drm/amd/display/dc/link/link_detection.c index d6f0f857c05a..f2fe523f914f 100644 --- a/drivers/gpu/drm/amd/display/dc/link/link_detection.c +++ b/drivers/gpu/drm/amd/display/dc/link/link_detection.c @@ -1088,6 +1088,9 @@ static bool detect_link_and_local_sink(struct dc_link *link, if (sink->edid_caps.panel_patch.skip_scdc_overwrite) link->ctx->dc->debug.hdmi20_disable = true; + if (sink->edid_caps.panel_patch.remove_sink_ext_caps) + link->dpcd_sink_ext_caps.raw = 0; + if (dc_is_hdmi_signal(link->connector_signal)) read_scdc_caps(link->ddc, link->local_sink); -- cgit v1.2.3 From 07ee43faeb7eb088e49a7549fcabcae94c443d3b Mon Sep 17 00:00:00 2001 From: Yang Wang Date: Mon, 13 Nov 2023 14:34:55 +0800 Subject: drm/amdgpu: fix ras err_data null pointer issue in amdgpu_ras.c fix ras err_data null pointer issue in amdgpu_ras.c Fixes: 8cc0f5669eb6 ("drm/amdgpu: Support multiple error query modes") Signed-off-by: Yang Wang Reviewed-by: Hawking Zhang Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c index 84e5987b14e0..a3dc68e98910 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c @@ -1188,7 +1188,7 @@ static int amdgpu_ras_query_error_status_helper(struct amdgpu_device *adev, } if (block_obj->hw_ops->query_ras_error_count) - block_obj->hw_ops->query_ras_error_count(adev, &err_data); + block_obj->hw_ops->query_ras_error_count(adev, err_data); if ((info->head.block == AMDGPU_RAS_BLOCK__SDMA) || (info->head.block == AMDGPU_RAS_BLOCK__GFX) || -- cgit v1.2.3 From 0f216364625cb453b4f933deacfa92df7f2a2fc9 Mon Sep 17 00:00:00 2001 From: Lijo Lazar Date: Fri, 10 Nov 2023 13:15:39 +0530 Subject: drm/amd/pm: Don't send unload message for reset No need to notify about unload during reset. Also remove the FW version check. Signed-off-by: Lijo Lazar Reviewed-by: Yang Wang Reviewed-by: Asad Kamal Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0_6_ppt.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0_6_ppt.c b/drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0_6_ppt.c index 84fac499cf0c..0e5a77c3c2e2 100644 --- a/drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0_6_ppt.c +++ b/drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0_6_ppt.c @@ -1454,7 +1454,7 @@ static int smu_v13_0_6_register_irq_handler(struct smu_context *smu) static int smu_v13_0_6_notify_unload(struct smu_context *smu) { - if (smu->smc_fw_version <= 0x553500) + if (amdgpu_in_reset(smu->adev)) return 0; dev_dbg(smu->adev->dev, "Notify PMFW about driver unload"); -- cgit v1.2.3 From 5e8a0d3598b47ee5a57708072bdef08816264538 Mon Sep 17 00:00:00 2001 From: Duncan Ma Date: Wed, 25 Oct 2023 19:07:21 -0400 Subject: drm/amd/display: Negate IPS allow and commit bits [WHY] On s0i3, IPS mask isn't saved and restored. It is reset to zero on exit. If it is cleared unexpectedly, driver will proceed operations while DCN is in IPS2 and cause a hang. [HOW] Negate the bit logic. Default value of zero indicates it is still in IPS2. Driver must poll for the bit to assert. Cc: Mario Limonciello Cc: Alex Deucher Cc: stable@vger.kernel.org Reviewed-by: Charlene Liu Acked-by: Alex Hung Signed-off-by: Duncan Ma Tested-by: Daniel Wheeler Signed-off-by: Alex Deucher --- .../drm/amd/display/dc/clk_mgr/dcn35/dcn35_clk_mgr.c | 18 +++++++++--------- drivers/gpu/drm/amd/display/dc/core/dc.c | 4 ++-- drivers/gpu/drm/amd/display/dc/dc_dmub_srv.c | 10 +++++----- 3 files changed, 16 insertions(+), 16 deletions(-) diff --git a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn35/dcn35_clk_mgr.c b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn35/dcn35_clk_mgr.c index 0fa4fcd00de2..507a7cf56711 100644 --- a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn35/dcn35_clk_mgr.c +++ b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn35/dcn35_clk_mgr.c @@ -820,22 +820,22 @@ static void dcn35_set_idle_state(struct clk_mgr *clk_mgr_base, bool allow_idle) if (dc->config.disable_ips == DMUB_IPS_ENABLE || dc->config.disable_ips == DMUB_IPS_DISABLE_DYNAMIC) { - val |= DMUB_IPS1_ALLOW_MASK; - val |= DMUB_IPS2_ALLOW_MASK; - } else if (dc->config.disable_ips == DMUB_IPS_DISABLE_IPS1) { val = val & ~DMUB_IPS1_ALLOW_MASK; val = val & ~DMUB_IPS2_ALLOW_MASK; - } else if (dc->config.disable_ips == DMUB_IPS_DISABLE_IPS2) { - val |= DMUB_IPS1_ALLOW_MASK; - val = val & ~DMUB_IPS2_ALLOW_MASK; - } else if (dc->config.disable_ips == DMUB_IPS_DISABLE_IPS2_Z10) { + } else if (dc->config.disable_ips == DMUB_IPS_DISABLE_IPS1) { val |= DMUB_IPS1_ALLOW_MASK; val |= DMUB_IPS2_ALLOW_MASK; + } else if (dc->config.disable_ips == DMUB_IPS_DISABLE_IPS2) { + val = val & ~DMUB_IPS1_ALLOW_MASK; + val |= DMUB_IPS2_ALLOW_MASK; + } else if (dc->config.disable_ips == DMUB_IPS_DISABLE_IPS2_Z10) { + val = val & ~DMUB_IPS1_ALLOW_MASK; + val = val & ~DMUB_IPS2_ALLOW_MASK; } if (!allow_idle) { - val = val & ~DMUB_IPS1_ALLOW_MASK; - val = val & ~DMUB_IPS2_ALLOW_MASK; + val |= DMUB_IPS1_ALLOW_MASK; + val |= DMUB_IPS2_ALLOW_MASK; } dcn35_smu_write_ips_scratch(clk_mgr, val); diff --git a/drivers/gpu/drm/amd/display/dc/core/dc.c b/drivers/gpu/drm/amd/display/dc/core/dc.c index d8f434738212..76b47f178127 100644 --- a/drivers/gpu/drm/amd/display/dc/core/dc.c +++ b/drivers/gpu/drm/amd/display/dc/core/dc.c @@ -4934,8 +4934,8 @@ bool dc_dmub_is_ips_idle_state(struct dc *dc) if (dc->hwss.get_idle_state) idle_state = dc->hwss.get_idle_state(dc); - if ((idle_state & DMUB_IPS1_ALLOW_MASK) || - (idle_state & DMUB_IPS2_ALLOW_MASK)) + if (!(idle_state & DMUB_IPS1_ALLOW_MASK) || + !(idle_state & DMUB_IPS2_ALLOW_MASK)) return true; return false; diff --git a/drivers/gpu/drm/amd/display/dc/dc_dmub_srv.c b/drivers/gpu/drm/amd/display/dc/dc_dmub_srv.c index e4c007203318..0e07699c1e83 100644 --- a/drivers/gpu/drm/amd/display/dc/dc_dmub_srv.c +++ b/drivers/gpu/drm/amd/display/dc/dc_dmub_srv.c @@ -1202,11 +1202,11 @@ void dc_dmub_srv_exit_low_power_state(const struct dc *dc) allow_state = dc->hwss.get_idle_state(dc); dc->hwss.set_idle_state(dc, false); - if (allow_state & DMUB_IPS2_ALLOW_MASK) { + if (!(allow_state & DMUB_IPS2_ALLOW_MASK)) { // Wait for evaluation time udelay(dc->debug.ips2_eval_delay_us); commit_state = dc->hwss.get_idle_state(dc); - if (commit_state & DMUB_IPS2_COMMIT_MASK) { + if (!(commit_state & DMUB_IPS2_COMMIT_MASK)) { // Tell PMFW to exit low power state dc->clk_mgr->funcs->exit_low_power_state(dc->clk_mgr); @@ -1216,7 +1216,7 @@ void dc_dmub_srv_exit_low_power_state(const struct dc *dc) for (i = 0; i < max_num_polls; ++i) { commit_state = dc->hwss.get_idle_state(dc); - if (!(commit_state & DMUB_IPS2_COMMIT_MASK)) + if (commit_state & DMUB_IPS2_COMMIT_MASK) break; udelay(1); @@ -1235,10 +1235,10 @@ void dc_dmub_srv_exit_low_power_state(const struct dc *dc) } dc_dmub_srv_notify_idle(dc, false); - if (allow_state & DMUB_IPS1_ALLOW_MASK) { + if (!(allow_state & DMUB_IPS1_ALLOW_MASK)) { for (i = 0; i < max_num_polls; ++i) { commit_state = dc->hwss.get_idle_state(dc); - if (!(commit_state & DMUB_IPS1_COMMIT_MASK)) + if (commit_state & DMUB_IPS1_COMMIT_MASK) break; udelay(1); -- cgit v1.2.3 From 9ddea8c9775d9379d71e6ac1519c552461b90b07 Mon Sep 17 00:00:00 2001 From: Shiwu Zhang Date: Tue, 31 Oct 2023 11:02:49 +0800 Subject: drm/amdgpu: add and populate the port num into xgmi topology info The port num info is firstly introduced with 20.00.01.13 xgmi ta and make them as part of topology info. Signed-off-by: Shiwu Zhang Reviewed-by: Le Ma Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu_psp.c | 5 +++++ drivers/gpu/drm/amd/amdgpu/amdgpu_psp.h | 1 + 2 files changed, 6 insertions(+) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_psp.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_psp.c index 32b701cc0376..a21045d018f2 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_psp.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_psp.c @@ -1473,6 +1473,11 @@ int psp_xgmi_get_topology_info(struct psp_context *psp, topology->nodes[i].num_links = (requires_reflection && topology->nodes[i].num_links) ? topology->nodes[i].num_links : node_num_links; } + /* popluate the connected port num info if supported and available */ + if (ta_port_num_support && topology->nodes[i].num_links) { + memcpy(topology->nodes[i].port_num, link_extend_info_output->nodes[i].port_num, + sizeof(struct xgmi_connected_port_num) * TA_XGMI__MAX_PORT_NUM); + } /* reflect the topology information for bi-directionality */ if (requires_reflection && topology->nodes[i].num_hops) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_psp.h b/drivers/gpu/drm/amd/amdgpu/amdgpu_psp.h index 5d36ad3f48c7..c4d9cbde55b9 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_psp.h +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_psp.h @@ -150,6 +150,7 @@ struct psp_xgmi_node_info { uint8_t is_sharing_enabled; enum ta_xgmi_assigned_sdma_engine sdma_engine; uint8_t num_links; + struct xgmi_connected_port_num port_num[TA_XGMI__MAX_PORT_NUM]; }; struct psp_xgmi_topology_info { -- cgit v1.2.3 From 5911d02cac70d7fb52009fbd37423e63f8f6f9bc Mon Sep 17 00:00:00 2001 From: Lewis Huang Date: Thu, 19 Oct 2023 17:22:21 +0800 Subject: drm/amd/display: Change the DMCUB mailbox memory location from FB to inbox [WHY] Flush command sent to DMCUB spends more time for execution on a dGPU than on an APU. This causes cursor lag when using high refresh rate mouses. [HOW] 1. Change the DMCUB mailbox memory location from FB to inbox. 2. Only change windows memory to inbox. Cc: Mario Limonciello Cc: Alex Deucher Cc: stable@vger.kernel.org Reviewed-by: Nicholas Kazlauskas Acked-by: Alex Hung Signed-off-by: Lewis Huang Tested-by: Daniel Wheeler Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 13 ++++----- drivers/gpu/drm/amd/display/dmub/dmub_srv.h | 22 ++++++++++------ drivers/gpu/drm/amd/display/dmub/src/dmub_srv.c | 32 +++++++++++++++++------ 3 files changed, 45 insertions(+), 22 deletions(-) diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c index 9581510d3740..ee97814ebd99 100644 --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c @@ -2079,7 +2079,7 @@ static int dm_dmub_sw_init(struct amdgpu_device *adev) struct dmub_srv_create_params create_params; struct dmub_srv_region_params region_params; struct dmub_srv_region_info region_info; - struct dmub_srv_fb_params fb_params; + struct dmub_srv_memory_params memory_params; struct dmub_srv_fb_info *fb_info; struct dmub_srv *dmub_srv; const struct dmcub_firmware_header_v1_0 *hdr; @@ -2182,6 +2182,7 @@ static int dm_dmub_sw_init(struct amdgpu_device *adev) adev->dm.dmub_fw->data + le32_to_cpu(hdr->header.ucode_array_offset_bytes) + PSP_HEADER_BYTES; + region_params.is_mailbox_in_inbox = false; status = dmub_srv_calc_region_info(dmub_srv, ®ion_params, ®ion_info); @@ -2205,10 +2206,10 @@ static int dm_dmub_sw_init(struct amdgpu_device *adev) return r; /* Rebase the regions on the framebuffer address. */ - memset(&fb_params, 0, sizeof(fb_params)); - fb_params.cpu_addr = adev->dm.dmub_bo_cpu_addr; - fb_params.gpu_addr = adev->dm.dmub_bo_gpu_addr; - fb_params.region_info = ®ion_info; + memset(&memory_params, 0, sizeof(memory_params)); + memory_params.cpu_fb_addr = adev->dm.dmub_bo_cpu_addr; + memory_params.gpu_fb_addr = adev->dm.dmub_bo_gpu_addr; + memory_params.region_info = ®ion_info; adev->dm.dmub_fb_info = kzalloc(sizeof(*adev->dm.dmub_fb_info), GFP_KERNEL); @@ -2220,7 +2221,7 @@ static int dm_dmub_sw_init(struct amdgpu_device *adev) return -ENOMEM; } - status = dmub_srv_calc_fb_info(dmub_srv, &fb_params, fb_info); + status = dmub_srv_calc_mem_info(dmub_srv, &memory_params, fb_info); if (status != DMUB_STATUS_OK) { DRM_ERROR("Error calculating DMUB FB info: %d\n", status); return -EINVAL; diff --git a/drivers/gpu/drm/amd/display/dmub/dmub_srv.h b/drivers/gpu/drm/amd/display/dmub/dmub_srv.h index 9665ada0f894..df63aa8f01e9 100644 --- a/drivers/gpu/drm/amd/display/dmub/dmub_srv.h +++ b/drivers/gpu/drm/amd/display/dmub/dmub_srv.h @@ -195,6 +195,7 @@ struct dmub_srv_region_params { uint32_t vbios_size; const uint8_t *fw_inst_const; const uint8_t *fw_bss_data; + bool is_mailbox_in_inbox; }; /** @@ -214,20 +215,25 @@ struct dmub_srv_region_params { */ struct dmub_srv_region_info { uint32_t fb_size; + uint32_t inbox_size; uint8_t num_regions; struct dmub_region regions[DMUB_WINDOW_TOTAL]; }; /** - * struct dmub_srv_fb_params - parameters used for driver fb setup + * struct dmub_srv_memory_params - parameters used for driver fb setup * @region_info: region info calculated by dmub service - * @cpu_addr: base cpu address for the framebuffer - * @gpu_addr: base gpu virtual address for the framebuffer + * @cpu_fb_addr: base cpu address for the framebuffer + * @cpu_inbox_addr: base cpu address for the gart + * @gpu_fb_addr: base gpu virtual address for the framebuffer + * @gpu_inbox_addr: base gpu virtual address for the gart */ -struct dmub_srv_fb_params { +struct dmub_srv_memory_params { const struct dmub_srv_region_info *region_info; - void *cpu_addr; - uint64_t gpu_addr; + void *cpu_fb_addr; + void *cpu_inbox_addr; + uint64_t gpu_fb_addr; + uint64_t gpu_inbox_addr; }; /** @@ -563,8 +569,8 @@ dmub_srv_calc_region_info(struct dmub_srv *dmub, * DMUB_STATUS_OK - success * DMUB_STATUS_INVALID - unspecified error */ -enum dmub_status dmub_srv_calc_fb_info(struct dmub_srv *dmub, - const struct dmub_srv_fb_params *params, +enum dmub_status dmub_srv_calc_mem_info(struct dmub_srv *dmub, + const struct dmub_srv_memory_params *params, struct dmub_srv_fb_info *out); /** diff --git a/drivers/gpu/drm/amd/display/dmub/src/dmub_srv.c b/drivers/gpu/drm/amd/display/dmub/src/dmub_srv.c index 5d36f3e5dc2b..22fc4ba96def 100644 --- a/drivers/gpu/drm/amd/display/dmub/src/dmub_srv.c +++ b/drivers/gpu/drm/amd/display/dmub/src/dmub_srv.c @@ -434,7 +434,7 @@ dmub_srv_calc_region_info(struct dmub_srv *dmub, uint32_t fw_state_size = DMUB_FW_STATE_SIZE; uint32_t trace_buffer_size = DMUB_TRACE_BUFFER_SIZE; uint32_t scratch_mem_size = DMUB_SCRATCH_MEM_SIZE; - + uint32_t previous_top = 0; if (!dmub->sw_init) return DMUB_STATUS_INVALID; @@ -459,8 +459,15 @@ dmub_srv_calc_region_info(struct dmub_srv *dmub, bios->base = dmub_align(stack->top, 256); bios->top = bios->base + params->vbios_size; - mail->base = dmub_align(bios->top, 256); - mail->top = mail->base + DMUB_MAILBOX_SIZE; + if (params->is_mailbox_in_inbox) { + mail->base = 0; + mail->top = mail->base + DMUB_MAILBOX_SIZE; + previous_top = bios->top; + } else { + mail->base = dmub_align(bios->top, 256); + mail->top = mail->base + DMUB_MAILBOX_SIZE; + previous_top = mail->top; + } fw_info = dmub_get_fw_meta_info(params); @@ -479,7 +486,7 @@ dmub_srv_calc_region_info(struct dmub_srv *dmub, dmub->fw_version = fw_info->fw_version; } - trace_buff->base = dmub_align(mail->top, 256); + trace_buff->base = dmub_align(previous_top, 256); trace_buff->top = trace_buff->base + dmub_align(trace_buffer_size, 64); fw_state->base = dmub_align(trace_buff->top, 256); @@ -490,11 +497,14 @@ dmub_srv_calc_region_info(struct dmub_srv *dmub, out->fb_size = dmub_align(scratch_mem->top, 4096); + if (params->is_mailbox_in_inbox) + out->inbox_size = dmub_align(mail->top, 4096); + return DMUB_STATUS_OK; } -enum dmub_status dmub_srv_calc_fb_info(struct dmub_srv *dmub, - const struct dmub_srv_fb_params *params, +enum dmub_status dmub_srv_calc_mem_info(struct dmub_srv *dmub, + const struct dmub_srv_memory_params *params, struct dmub_srv_fb_info *out) { uint8_t *cpu_base; @@ -509,8 +519,8 @@ enum dmub_status dmub_srv_calc_fb_info(struct dmub_srv *dmub, if (params->region_info->num_regions != DMUB_NUM_WINDOWS) return DMUB_STATUS_INVALID; - cpu_base = (uint8_t *)params->cpu_addr; - gpu_base = params->gpu_addr; + cpu_base = (uint8_t *)params->cpu_fb_addr; + gpu_base = params->gpu_fb_addr; for (i = 0; i < DMUB_NUM_WINDOWS; ++i) { const struct dmub_region *reg = @@ -518,6 +528,12 @@ enum dmub_status dmub_srv_calc_fb_info(struct dmub_srv *dmub, out->fb[i].cpu_addr = cpu_base + reg->base; out->fb[i].gpu_addr = gpu_base + reg->base; + + if (i == DMUB_WINDOW_4_MAILBOX && params->cpu_inbox_addr != 0) { + out->fb[i].cpu_addr = (uint8_t *)params->cpu_inbox_addr + reg->base; + out->fb[i].gpu_addr = params->gpu_inbox_addr + reg->base; + } + out->fb[i].size = reg->top - reg->base; } -- cgit v1.2.3 From 0ee057e66c4b782809a0a9265cdac5542e646706 Mon Sep 17 00:00:00 2001 From: Nicholas Susanto Date: Wed, 1 Nov 2023 15:30:10 -0400 Subject: drm/amd/display: Fix encoder disable logic [WHY] DENTIST hangs when OTG is off and encoder is on. We were not disabling the encoder properly when switching from extended mode to external monitor only. [HOW] Disable the encoder using an existing enable/disable fifo helper instead of enc35_stream_encoder_enable. Cc: Mario Limonciello Cc: Alex Deucher Cc: stable@vger.kernel.org Reviewed-by: Nicholas Kazlauskas Acked-by: Alex Hung Signed-off-by: Nicholas Susanto Tested-by: Daniel Wheeler Signed-off-by: Alex Deucher --- .../gpu/drm/amd/display/dc/dcn35/dcn35_dio_stream_encoder.c | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-) diff --git a/drivers/gpu/drm/amd/display/dc/dcn35/dcn35_dio_stream_encoder.c b/drivers/gpu/drm/amd/display/dc/dcn35/dcn35_dio_stream_encoder.c index 001f9eb66920..62a8f0b56006 100644 --- a/drivers/gpu/drm/amd/display/dc/dcn35/dcn35_dio_stream_encoder.c +++ b/drivers/gpu/drm/amd/display/dc/dcn35/dcn35_dio_stream_encoder.c @@ -261,12 +261,6 @@ static void enc35_stream_encoder_enable( /* invalid mode ! */ ASSERT_CRITICAL(false); } - - REG_UPDATE(DIG_FE_CLK_CNTL, DIG_FE_CLK_EN, 1); - REG_UPDATE(DIG_FE_EN_CNTL, DIG_FE_ENABLE, 1); - } else { - REG_UPDATE(DIG_FE_EN_CNTL, DIG_FE_ENABLE, 0); - REG_UPDATE(DIG_FE_CLK_CNTL, DIG_FE_CLK_EN, 0); } } @@ -436,6 +430,8 @@ static void enc35_disable_fifo(struct stream_encoder *enc) struct dcn10_stream_encoder *enc1 = DCN10STRENC_FROM_STRENC(enc); REG_UPDATE(DIG_FIFO_CTRL0, DIG_FIFO_ENABLE, 0); + REG_UPDATE(DIG_FE_EN_CNTL, DIG_FE_ENABLE, 0); + REG_UPDATE(DIG_FE_CLK_CNTL, DIG_FE_CLK_EN, 0); } static void enc35_enable_fifo(struct stream_encoder *enc) @@ -443,6 +439,8 @@ static void enc35_enable_fifo(struct stream_encoder *enc) struct dcn10_stream_encoder *enc1 = DCN10STRENC_FROM_STRENC(enc); REG_UPDATE(DIG_FIFO_CTRL0, DIG_FIFO_READ_START_LEVEL, 0x7); + REG_UPDATE(DIG_FE_CLK_CNTL, DIG_FE_CLK_EN, 1); + REG_UPDATE(DIG_FE_EN_CNTL, DIG_FE_ENABLE, 1); enc35_reset_fifo(enc, true); enc35_reset_fifo(enc, false); -- cgit v1.2.3 From 564ca1b53ece166b5915c2ac90f3e9313100f4ea Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Tue, 14 Nov 2023 11:36:56 -0500 Subject: drm/amdgpu/gmc11: fix logic typo in AGP check MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Should be && rather than ||. Fixes: b2e1cbe6281f ("drm/amdgpu/gmc11: disable AGP on GC 11.5") Acked-by: Christian König Reviewed-by: Mario Limonciello Tested-by: Mario Limonciello # PHX & Navi33 Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/gmc_v11_0.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/amd/amdgpu/gmc_v11_0.c b/drivers/gpu/drm/amd/amdgpu/gmc_v11_0.c index 6dce9b29f675..ba4c82f5e617 100644 --- a/drivers/gpu/drm/amd/amdgpu/gmc_v11_0.c +++ b/drivers/gpu/drm/amd/amdgpu/gmc_v11_0.c @@ -640,7 +640,7 @@ static void gmc_v11_0_vram_gtt_location(struct amdgpu_device *adev, amdgpu_gmc_set_agp_default(adev, mc); amdgpu_gmc_vram_location(adev, &adev->gmc, base); amdgpu_gmc_gart_location(adev, mc, AMDGPU_GART_PLACEMENT_HIGH); - if (!amdgpu_sriov_vf(adev) || + if (!amdgpu_sriov_vf(adev) && (amdgpu_ip_version(adev, GC_HWIP, 0) < IP_VERSION(11, 5, 0))) amdgpu_gmc_agp_location(adev, mc); -- cgit v1.2.3 From 6ba5b613837c5d997ad8297b22fc46cd0be58d76 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 9 Nov 2023 15:31:00 -0500 Subject: drm/amdgpu: add a module parameter to control the AGP aperture MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Add a module parameter to control the AGP aperture. The AGP aperture is an aperture in the GPU's internal address space which provides direct non-paged access to the platform address space. This access is non-snooped so only uncached memory can be accessed. Add a knob so that we can toggle this for debugging. Fixes: 67318cb84341 ("drm/amdgpu/gmc11: set gart placement GC11") Acked-by: Christian König Reviewed-by: Mario Limonciello Tested-by: Mario Limonciello # PHX & Navi33 Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu.h | 1 + drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c | 10 ++++++++++ drivers/gpu/drm/amd/amdgpu/gmc_v10_0.c | 2 +- drivers/gpu/drm/amd/amdgpu/gmc_v11_0.c | 3 ++- drivers/gpu/drm/amd/amdgpu/gmc_v9_0.c | 2 +- 5 files changed, 15 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu.h b/drivers/gpu/drm/amd/amdgpu/amdgpu.h index afec09930efa..9d92ca157677 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu.h +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu.h @@ -248,6 +248,7 @@ extern int amdgpu_umsch_mm; extern int amdgpu_seamless; extern int amdgpu_user_partt_mode; +extern int amdgpu_agp; #define AMDGPU_VM_MAX_NUM_CTX 4096 #define AMDGPU_SG_THRESHOLD (256*1024*1024) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c index 3095a3a864af..8f24cabe2155 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c @@ -207,6 +207,7 @@ int amdgpu_user_partt_mode = AMDGPU_AUTO_COMPUTE_PARTITION_MODE; int amdgpu_umsch_mm; int amdgpu_seamless = -1; /* auto */ uint amdgpu_debug_mask; +int amdgpu_agp = -1; /* auto */ static void amdgpu_drv_delayed_reset_work_handler(struct work_struct *work); @@ -961,6 +962,15 @@ module_param_named(seamless, amdgpu_seamless, int, 0444); MODULE_PARM_DESC(debug_mask, "debug options for amdgpu, disabled by default"); module_param_named(debug_mask, amdgpu_debug_mask, uint, 0444); +/** + * DOC: agp (int) + * Enable the AGP aperture. This provides an aperture in the GPU's internal + * address space for direct access to system memory. Note that these accesses + * are non-snooped, so they are only used for access to uncached memory. + */ +MODULE_PARM_DESC(agp, "AGP (-1 = auto (default), 0 = disable, 1 = enable)"); +module_param_named(agp, amdgpu_agp, int, 0444); + /* These devices are not supported by amdgpu. * They are supported by the mach64, r128, radeon drivers */ diff --git a/drivers/gpu/drm/amd/amdgpu/gmc_v10_0.c b/drivers/gpu/drm/amd/amdgpu/gmc_v10_0.c index 0ec7b061d7c2..23483bffa1c7 100644 --- a/drivers/gpu/drm/amd/amdgpu/gmc_v10_0.c +++ b/drivers/gpu/drm/amd/amdgpu/gmc_v10_0.c @@ -675,7 +675,7 @@ static void gmc_v10_0_vram_gtt_location(struct amdgpu_device *adev, amdgpu_gmc_set_agp_default(adev, mc); amdgpu_gmc_vram_location(adev, &adev->gmc, base); amdgpu_gmc_gart_location(adev, mc, AMDGPU_GART_PLACEMENT_BEST_FIT); - if (!amdgpu_sriov_vf(adev)) + if (!amdgpu_sriov_vf(adev) && (amdgpu_agp != 0)) amdgpu_gmc_agp_location(adev, mc); /* base offset of vram pages */ diff --git a/drivers/gpu/drm/amd/amdgpu/gmc_v11_0.c b/drivers/gpu/drm/amd/amdgpu/gmc_v11_0.c index ba4c82f5e617..e1078b53e942 100644 --- a/drivers/gpu/drm/amd/amdgpu/gmc_v11_0.c +++ b/drivers/gpu/drm/amd/amdgpu/gmc_v11_0.c @@ -641,7 +641,8 @@ static void gmc_v11_0_vram_gtt_location(struct amdgpu_device *adev, amdgpu_gmc_vram_location(adev, &adev->gmc, base); amdgpu_gmc_gart_location(adev, mc, AMDGPU_GART_PLACEMENT_HIGH); if (!amdgpu_sriov_vf(adev) && - (amdgpu_ip_version(adev, GC_HWIP, 0) < IP_VERSION(11, 5, 0))) + (amdgpu_ip_version(adev, GC_HWIP, 0) < IP_VERSION(11, 5, 0)) && + (amdgpu_agp != 0)) amdgpu_gmc_agp_location(adev, mc); /* base offset of vram pages */ diff --git a/drivers/gpu/drm/amd/amdgpu/gmc_v9_0.c b/drivers/gpu/drm/amd/amdgpu/gmc_v9_0.c index c1f2f166f064..1638c3177799 100644 --- a/drivers/gpu/drm/amd/amdgpu/gmc_v9_0.c +++ b/drivers/gpu/drm/amd/amdgpu/gmc_v9_0.c @@ -1630,7 +1630,7 @@ static void gmc_v9_0_vram_gtt_location(struct amdgpu_device *adev, } else { amdgpu_gmc_vram_location(adev, mc, base); amdgpu_gmc_gart_location(adev, mc, AMDGPU_GART_PLACEMENT_BEST_FIT); - if (!amdgpu_sriov_vf(adev)) + if (!amdgpu_sriov_vf(adev) && (amdgpu_agp != 0)) amdgpu_gmc_agp_location(adev, mc); } /* base offset of vram pages */ -- cgit v1.2.3 From 0db062eac3e0846c6f120867a79df83b4c3db46f Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 9 Nov 2023 15:34:19 -0500 Subject: drm/amdgpu/gmc11: disable AGP aperture MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit We've had misc reports of random IOMMU page faults when this is used. It's just a rarely used optimization anyway, so let's just disable it. It can still be toggled via the module parameter for testing. v2: leave it configurable via module parameter Fixes: 67318cb84341 ("drm/amdgpu/gmc11: set gart placement GC11") Reviewed-by: Yang Wang (v1) Acked-by: Christian König Reviewed-by: Mario Limonciello Tested-by: Mario Limonciello # PHX & Navi33 Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/gmc_v11_0.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/amd/amdgpu/gmc_v11_0.c b/drivers/gpu/drm/amd/amdgpu/gmc_v11_0.c index e1078b53e942..23d7b548d13f 100644 --- a/drivers/gpu/drm/amd/amdgpu/gmc_v11_0.c +++ b/drivers/gpu/drm/amd/amdgpu/gmc_v11_0.c @@ -642,7 +642,7 @@ static void gmc_v11_0_vram_gtt_location(struct amdgpu_device *adev, amdgpu_gmc_gart_location(adev, mc, AMDGPU_GART_PLACEMENT_HIGH); if (!amdgpu_sriov_vf(adev) && (amdgpu_ip_version(adev, GC_HWIP, 0) < IP_VERSION(11, 5, 0)) && - (amdgpu_agp != 0)) + (amdgpu_agp == 1)) amdgpu_gmc_agp_location(adev, mc); /* base offset of vram pages */ -- cgit v1.2.3 From 61fc93695bbfde218d5f9f0b8051ce36eb649669 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 9 Nov 2023 15:38:54 -0500 Subject: drm/amdgpu/gmc10: disable AGP aperture MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit We've had misc reports of random IOMMU page faults when this is used. It's just a rarely used optimization anyway, so let's just disable it. It can still be toggled via the module parameter for testing. v2: leave it configurable via module parameter Reviewed-by: Yang Wang (v1) Acked-by: Christian König Reviewed-by: Mario Limonciello Tested-by: Mario Limonciello # PHX & Navi33 Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/gmc_v10_0.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/amd/amdgpu/gmc_v10_0.c b/drivers/gpu/drm/amd/amdgpu/gmc_v10_0.c index 23483bffa1c7..a5a05c16c10d 100644 --- a/drivers/gpu/drm/amd/amdgpu/gmc_v10_0.c +++ b/drivers/gpu/drm/amd/amdgpu/gmc_v10_0.c @@ -675,7 +675,7 @@ static void gmc_v10_0_vram_gtt_location(struct amdgpu_device *adev, amdgpu_gmc_set_agp_default(adev, mc); amdgpu_gmc_vram_location(adev, &adev->gmc, base); amdgpu_gmc_gart_location(adev, mc, AMDGPU_GART_PLACEMENT_BEST_FIT); - if (!amdgpu_sriov_vf(adev) && (amdgpu_agp != 0)) + if (!amdgpu_sriov_vf(adev) && (amdgpu_agp == 1)) amdgpu_gmc_agp_location(adev, mc); /* base offset of vram pages */ -- cgit v1.2.3 From e8c2d3e25b844ad8f7c8b269a7cfd65285329264 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 9 Nov 2023 15:40:00 -0500 Subject: drm/amdgpu/gmc9: disable AGP aperture MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit We've had misc reports of random IOMMU page faults when this is used. It's just a rarely used optimization anyway, so let's just disable it. It can still be toggled via the module parameter for testing. v2: leave it configurable via module parameter Reviewed-by: Yang Wang (v1) Acked-by: Christian König Reviewed-by: Mario Limonciello Tested-by: Mario Limonciello # PHX & Navi33 Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/gmc_v9_0.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/amd/amdgpu/gmc_v9_0.c b/drivers/gpu/drm/amd/amdgpu/gmc_v9_0.c index 1638c3177799..2ac5820e9c92 100644 --- a/drivers/gpu/drm/amd/amdgpu/gmc_v9_0.c +++ b/drivers/gpu/drm/amd/amdgpu/gmc_v9_0.c @@ -1630,7 +1630,7 @@ static void gmc_v9_0_vram_gtt_location(struct amdgpu_device *adev, } else { amdgpu_gmc_vram_location(adev, mc, base); amdgpu_gmc_gart_location(adev, mc, AMDGPU_GART_PLACEMENT_BEST_FIT); - if (!amdgpu_sriov_vf(adev) && (amdgpu_agp != 0)) + if (!amdgpu_sriov_vf(adev) && (amdgpu_agp == 1)) amdgpu_gmc_agp_location(adev, mc); } /* base offset of vram pages */ -- cgit v1.2.3 From e6bace7313d61e31f2b16fa3d774fd8cb3cb869e Mon Sep 17 00:00:00 2001 From: David Howells Date: Thu, 2 Nov 2023 16:26:59 +0000 Subject: afs: Fix afs_server_list to be cleaned up with RCU afs_server_list is accessed with the rcu_read_lock() held from volume->servers, so it needs to be cleaned up correctly. Fix this by using kfree_rcu() instead of kfree(). Fixes: 8a070a964877 ("afs: Detect cell aliases 1 - Cells with root volumes") Signed-off-by: David Howells cc: Marc Dionne cc: linux-afs@lists.infradead.org --- fs/afs/internal.h | 1 + fs/afs/server_list.c | 2 +- 2 files changed, 2 insertions(+), 1 deletion(-) diff --git a/fs/afs/internal.h b/fs/afs/internal.h index c9cef3782b4a..a812952be1c9 100644 --- a/fs/afs/internal.h +++ b/fs/afs/internal.h @@ -553,6 +553,7 @@ struct afs_server_entry { }; struct afs_server_list { + struct rcu_head rcu; afs_volid_t vids[AFS_MAXTYPES]; /* Volume IDs */ refcount_t usage; unsigned char nr_servers; diff --git a/fs/afs/server_list.c b/fs/afs/server_list.c index ed9056703505..b59896b1de0a 100644 --- a/fs/afs/server_list.c +++ b/fs/afs/server_list.c @@ -17,7 +17,7 @@ void afs_put_serverlist(struct afs_net *net, struct afs_server_list *slist) for (i = 0; i < slist->nr_servers; i++) afs_unuse_server(net, slist->servers[i].server, afs_server_trace_put_slist); - kfree(slist); + kfree_rcu(slist, rcu); } } -- cgit v1.2.3 From 2a4ca1b4b77850544408595e2433f5d7811a9daa Mon Sep 17 00:00:00 2001 From: David Howells Date: Thu, 8 Jun 2023 09:43:54 +0100 Subject: afs: Make error on cell lookup failure consistent with OpenAFS When kafs tries to look up a cell in the DNS or the local config, it will translate a lookup failure into EDESTADDRREQ whereas OpenAFS translates it into ENOENT. Applications such as West expect the latter behaviour and fail if they see the former. This can be seen by trying to mount an unknown cell: # mount -t afs %example.com:cell.root /mnt mount: /mnt: mount(2) system call failed: Destination address required. Fixes: 4d673da14533 ("afs: Support the AFS dynamic root") Reported-by: Markus Suvanto Link: https://bugzilla.kernel.org/show_bug.cgi?id=216637 Signed-off-by: David Howells Reviewed-by: Jeffrey Altman cc: Marc Dionne cc: linux-afs@lists.infradead.org --- fs/afs/dynroot.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/afs/dynroot.c b/fs/afs/dynroot.c index 4d04ef2d3ae7..1fa8cf23bd36 100644 --- a/fs/afs/dynroot.c +++ b/fs/afs/dynroot.c @@ -132,8 +132,8 @@ static int afs_probe_cell_name(struct dentry *dentry) ret = dns_query(net->net, "afsdb", name, len, "srv=1", NULL, NULL, false); - if (ret == -ENODATA) - ret = -EDESTADDRREQ; + if (ret == -ENODATA || ret == -ENOKEY) + ret = -ENOENT; return ret; } -- cgit v1.2.3 From bff2a2d453a1b683378b4508b86b84389f551a00 Mon Sep 17 00:00:00 2001 From: Keith Busch Date: Mon, 6 Nov 2023 18:12:30 +0100 Subject: swiotlb-xen: provide the "max_mapping_size" method MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit There's a bug that when using the XEN hypervisor with bios with large multi-page bio vectors on NVMe, the kernel deadlocks [1]. The deadlocks are caused by inability to map a large bio vector - dma_map_sgtable always returns an error, this gets propagated to the block layer as BLK_STS_RESOURCE and the block layer retries the request indefinitely. XEN uses the swiotlb framework to map discontiguous pages into contiguous runs that are submitted to the PCIe device. The swiotlb framework has a limitation on the length of a mapping - this needs to be announced with the max_mapping_size method to make sure that the hardware drivers do not create larger mappings. Without max_mapping_size, the NVMe block driver would create large mappings that overrun the maximum mapping size. Reported-by: Marek Marczykowski-Górecki Link: https://lore.kernel.org/stable/ZTNH0qtmint%2FzLJZ@mail-itl/ [1] Tested-by: Marek Marczykowski-Górecki Suggested-by: Christoph Hellwig Cc: stable@vger.kernel.org Signed-off-by: Keith Busch Signed-off-by: Mikulas Patocka Acked-by: Stefano Stabellini Reviewed-by: Christoph Hellwig Link: https://lore.kernel.org/r/151bef41-e817-aea9-675-a35fdac4ed@redhat.com Signed-off-by: Juergen Gross --- drivers/xen/swiotlb-xen.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/xen/swiotlb-xen.c b/drivers/xen/swiotlb-xen.c index 946bd56f0ac5..0e6c6c25d154 100644 --- a/drivers/xen/swiotlb-xen.c +++ b/drivers/xen/swiotlb-xen.c @@ -405,4 +405,5 @@ const struct dma_map_ops xen_swiotlb_dma_ops = { .get_sgtable = dma_common_get_sgtable, .alloc_pages = dma_common_alloc_pages, .free_pages = dma_common_free_pages, + .max_mapping_size = swiotlb_max_mapping_size, }; -- cgit v1.2.3 From 2a842c4e2f76736f4ed2da9f02ca3ae3330d6b11 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Wed, 18 Oct 2023 08:17:11 +0200 Subject: dt-bindings: soc: rockchip: grf: add rockchip,rk3588-pmugrf Add rockchip,rk3588-pmugrf compatible string. Acked-by: Conor Dooley Signed-off-by: Sascha Hauer Link: https://lore.kernel.org/r/20231018061714.3553817-24-s.hauer@pengutronix.de Signed-off-by: Heiko Stuebner --- Documentation/devicetree/bindings/soc/rockchip/grf.yaml | 1 + 1 file changed, 1 insertion(+) diff --git a/Documentation/devicetree/bindings/soc/rockchip/grf.yaml b/Documentation/devicetree/bindings/soc/rockchip/grf.yaml index e4fa6a07b4fa..1309bf5ae0cd 100644 --- a/Documentation/devicetree/bindings/soc/rockchip/grf.yaml +++ b/Documentation/devicetree/bindings/soc/rockchip/grf.yaml @@ -233,6 +233,7 @@ allOf: - rockchip,rk3399-grf - rockchip,rk3399-pmugrf - rockchip,rk3568-pmugrf + - rockchip,rk3588-pmugrf - rockchip,rv1108-grf - rockchip,rv1108-pmugrf -- cgit v1.2.3 From 295b202227e98edb2fb5cc29b6ec4b96b2792d9c Mon Sep 17 00:00:00 2001 From: "Gustavo A. R. Silva" Date: Thu, 16 Nov 2023 12:54:59 -0600 Subject: xen: privcmd: Replace zero-length array with flex-array member and use __counted_by Fake flexible arrays (zero-length and one-element arrays) are deprecated, and should be replaced by flexible-array members. So, replace zero-length array with a flexible-array member in `struct privcmd_kernel_ioreq`. Also annotate array `ports` with `__counted_by()` to prepare for the coming implementation by GCC and Clang of the `__counted_by` attribute. Flexible array members annotated with `__counted_by` can have their accesses bounds-checked at run-time via `CONFIG_UBSAN_BOUNDS` (for array indexing) and `CONFIG_FORTIFY_SOURCE` (for strcpy/memcpy-family functions). This fixes multiple -Warray-bounds warnings: drivers/xen/privcmd.c:1239:30: warning: array subscript i is outside array bounds of 'struct ioreq_port[0]' [-Warray-bounds=] drivers/xen/privcmd.c:1240:30: warning: array subscript i is outside array bounds of 'struct ioreq_port[0]' [-Warray-bounds=] drivers/xen/privcmd.c:1241:30: warning: array subscript i is outside array bounds of 'struct ioreq_port[0]' [-Warray-bounds=] drivers/xen/privcmd.c:1245:33: warning: array subscript i is outside array bounds of 'struct ioreq_port[0]' [-Warray-bounds=] drivers/xen/privcmd.c:1258:67: warning: array subscript i is outside array bounds of 'struct ioreq_port[0]' [-Warray-bounds=] This results in no differences in binary output. Signed-off-by: Gustavo A. R. Silva Reviewed-by: Kees Cook Reviewed-by: Juergen Gross Link: https://lore.kernel.org/r/ZVZlg3tPMPCRdteh@work Signed-off-by: Juergen Gross --- drivers/xen/privcmd.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/xen/privcmd.c b/drivers/xen/privcmd.c index 1ce7f3c7a950..0eb337a8ec0f 100644 --- a/drivers/xen/privcmd.c +++ b/drivers/xen/privcmd.c @@ -1115,7 +1115,7 @@ struct privcmd_kernel_ioreq { spinlock_t lock; /* Protects ioeventfds list */ struct list_head ioeventfds; struct list_head list; - struct ioreq_port ports[0]; + struct ioreq_port ports[] __counted_by(vcpus); }; static irqreturn_t ioeventfd_interrupt(int irq, void *dev_id) -- cgit v1.2.3 From c6ea14d557343cd3af6c6be2f5a78c98bdb281bb Mon Sep 17 00:00:00 2001 From: Shyam Sundar S K Date: Thu, 16 Nov 2023 22:31:21 +0530 Subject: platform/x86/amd/pmc: adjust getting DRAM size behavior MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit amd_pmc_get_dram_size() is used to get the DRAM size information. But in the current code, mailbox command to get the DRAM size info is sent based on the values of dev->major and dev->minor. But dev->major and dev->minor will have either junk or zero assigned to them until at least once a call to amd_pmc_get_smu_version() is made which ideally populates dev->major and dev->minor. However, adding a amd_pmc_get_smu_version() call to amd_pmc_get_dram_size() has a downside of elevating the boot times. After talking to the PMFW team, it's understood that the "get dram size" mbox command would only be supported on specific platforms (like Mendocino) and not all. So, adjust getting DRAM size behavior such that, - if running on Rembrandt or Mendocino and the underlying PMFW knows how to execute the "get dram size" command it shall give the custom dram size. - if the underlying FW does not report the dram size, we just proceed further and assign the default dram size. The simplest way to address this is to remove amd_pmc_get_dram_size() function and directly call the "get dram size" command in the amd_pmc_s2d_init(). Reported-by: Mark Hasemeyer Fixes: be8325fb3d8c ("platform/x86/amd: pmc: Get STB DRAM size from PMFW") Cc: stable@vger.kernel.org Suggested-by: Sanket Goswami Signed-off-by: Shyam Sundar S K Link: https://lore.kernel.org/r/20231116170121.3372222-1-Shyam-sundar.S-k@amd.com Reviewed-by: Mario Limonciello Reviewed-by: Ilpo Järvinen Signed-off-by: Ilpo Järvinen --- drivers/platform/x86/amd/pmc/pmc.c | 31 ++----------------------------- 1 file changed, 2 insertions(+), 29 deletions(-) diff --git a/drivers/platform/x86/amd/pmc/pmc.c b/drivers/platform/x86/amd/pmc/pmc.c index cd6ac04c1468..c3104714b480 100644 --- a/drivers/platform/x86/amd/pmc/pmc.c +++ b/drivers/platform/x86/amd/pmc/pmc.c @@ -964,33 +964,6 @@ static const struct pci_device_id pmc_pci_ids[] = { { } }; -static int amd_pmc_get_dram_size(struct amd_pmc_dev *dev) -{ - int ret; - - switch (dev->cpu_id) { - case AMD_CPU_ID_YC: - if (!(dev->major > 90 || (dev->major == 90 && dev->minor > 39))) { - ret = -EINVAL; - goto err_dram_size; - } - break; - default: - ret = -EINVAL; - goto err_dram_size; - } - - ret = amd_pmc_send_cmd(dev, S2D_DRAM_SIZE, &dev->dram_size, dev->s2d_msg_id, true); - if (ret || !dev->dram_size) - goto err_dram_size; - - return 0; - -err_dram_size: - dev_err(dev->dev, "DRAM size command not supported for this platform\n"); - return ret; -} - static int amd_pmc_s2d_init(struct amd_pmc_dev *dev) { u32 phys_addr_low, phys_addr_hi; @@ -1009,8 +982,8 @@ static int amd_pmc_s2d_init(struct amd_pmc_dev *dev) return -EIO; /* Get DRAM size */ - ret = amd_pmc_get_dram_size(dev); - if (ret) + ret = amd_pmc_send_cmd(dev, S2D_DRAM_SIZE, &dev->dram_size, dev->s2d_msg_id, true); + if (ret || !dev->dram_size) dev->dram_size = S2D_TELEMETRY_DRAMBYTES_MAX; /* Get STB DRAM address */ -- cgit v1.2.3 From 24d85bb3be373b5831699bddf698b392bd2b904d Mon Sep 17 00:00:00 2001 From: Gil Fine Date: Tue, 7 Nov 2023 12:22:40 +0200 Subject: thunderbolt: Set lane bonding bit only for downstream port Fix the lane bonding procedure to follow the steps described in USB4 Connection Manager guide. Hence, set the lane bonding bit only for downstream port. This is needed for certain ASMedia device, otherwise lane bonding fails and the device disconnects. Cc: stable@vger.kernel.org Signed-off-by: Gil Fine Signed-off-by: Mika Westerberg --- drivers/thunderbolt/switch.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/thunderbolt/switch.c b/drivers/thunderbolt/switch.c index 1e15ffa79295..9e5cc285cc8d 100644 --- a/drivers/thunderbolt/switch.c +++ b/drivers/thunderbolt/switch.c @@ -1143,7 +1143,7 @@ int tb_port_lane_bonding_enable(struct tb_port *port) * Only set bonding if the link was not already bonded. This * avoids the lane adapter to re-enter bonding state. */ - if (width == TB_LINK_WIDTH_SINGLE) { + if (width == TB_LINK_WIDTH_SINGLE && !tb_is_upstream_port(port)) { ret = tb_port_set_lane_bonding(port, true); if (ret) goto err_lane1; -- cgit v1.2.3 From 5391bcfa56c79a891734e4d22aa0ca3217b86491 Mon Sep 17 00:00:00 2001 From: Mika Westerberg Date: Tue, 7 Nov 2023 14:34:27 +0200 Subject: thunderbolt: Send uevent after asymmetric/symmetric switch We should send uevent to userspace whenever the link speed or width changes but tb_switch_asym_enable() and tb_switch_asym_disable() set the sw->link_width already so tb_switch_update_link_attributes() never noticed the change. Fix this so that we let tb_switch_update_link_attributes() update the fields accordingly. Fixes: 81af2952e606 ("thunderbolt: Add support for asymmetric link") Reported-by: Pengfei Xu Tested-by: Pengfei Xu Signed-off-by: Mika Westerberg --- drivers/thunderbolt/switch.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/thunderbolt/switch.c b/drivers/thunderbolt/switch.c index 9e5cc285cc8d..44e9b09de47a 100644 --- a/drivers/thunderbolt/switch.c +++ b/drivers/thunderbolt/switch.c @@ -2880,6 +2880,7 @@ static int tb_switch_lane_bonding_disable(struct tb_switch *sw) return tb_port_wait_for_link_width(down, TB_LINK_WIDTH_SINGLE, 100); } +/* Note updating sw->link_width done in tb_switch_update_link_attributes() */ static int tb_switch_asym_enable(struct tb_switch *sw, enum tb_link_width width) { struct tb_port *up, *down, *port; @@ -2919,10 +2920,10 @@ static int tb_switch_asym_enable(struct tb_switch *sw, enum tb_link_width width) return ret; } - sw->link_width = width; return 0; } +/* Note updating sw->link_width done in tb_switch_update_link_attributes() */ static int tb_switch_asym_disable(struct tb_switch *sw) { struct tb_port *up, *down; @@ -2957,7 +2958,6 @@ static int tb_switch_asym_disable(struct tb_switch *sw) return ret; } - sw->link_width = TB_LINK_WIDTH_DUAL; return 0; } -- cgit v1.2.3 From 480713b1ba8eac4617936f8404da34bda991c30e Mon Sep 17 00:00:00 2001 From: Mika Westerberg Date: Mon, 13 Nov 2023 12:49:13 +0200 Subject: thunderbolt: Only add device router DP IN to the head of the DP resource list When pairing DP IN and DP OUT adapters for DisplayPort tunneling, we should prioritize the possible external GPU DP IN adapters to take advantage of the its capabilities. However the commit in question did this for host router DP IN adapters too and that changes ordering of the initial DP IN resources in such way that resuming from suspend may end up using different resource and that may confuse the user. Fix this so that we only put DP IN adapters of device routers to the top of the resource list and leave host routers as is. Fixes: 274baf695b08 ("thunderbolt: Add DP IN added last in the head of the list of DP resources") Reported-by: Pengfei Xu Signed-off-by: Mika Westerberg --- drivers/thunderbolt/tb.c | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-) diff --git a/drivers/thunderbolt/tb.c b/drivers/thunderbolt/tb.c index 5acdeb766860..fd49f86e0353 100644 --- a/drivers/thunderbolt/tb.c +++ b/drivers/thunderbolt/tb.c @@ -213,7 +213,17 @@ static void tb_add_dp_resources(struct tb_switch *sw) if (!tb_switch_query_dp_resource(sw, port)) continue; - list_add(&port->list, &tcm->dp_resources); + /* + * If DP IN on device router exist, position it at the + * beginning of the DP resources list, so that it is used + * before DP IN of the host router. This way external GPU(s) + * will be prioritized when pairing DP IN to a DP OUT. + */ + if (tb_route(sw)) + list_add(&port->list, &tcm->dp_resources); + else + list_add_tail(&port->list, &tcm->dp_resources); + tb_port_dbg(port, "DP IN resource available\n"); } } -- cgit v1.2.3 From 914fa861e3d7803c9bbafc229652c2a69edb8b60 Mon Sep 17 00:00:00 2001 From: Ferry Meng Date: Thu, 9 Nov 2023 19:18:22 +0800 Subject: erofs: simplify erofs_read_inode() After commit 1c7f49a76773 ("erofs: tidy up EROFS on-disk naming"), there is a unique `union erofs_inode_i_u` so that we could parse the union directly. Besides, it also replaces `inode->i_sb` with `sb` for simplicity. Signed-off-by: Ferry Meng Reviewed-by: Gao Xiang Reviewed-by: Yue Hu Reviewed-by: Chao Yu Link: https://lore.kernel.org/r/20231109111822.17944-1-mengferry@linux.alibaba.com Signed-off-by: Gao Xiang --- fs/erofs/inode.c | 98 ++++++++++++++++++++------------------------------------ 1 file changed, 35 insertions(+), 63 deletions(-) diff --git a/fs/erofs/inode.c b/fs/erofs/inode.c index b8ad05b4509d..14a79d3226ab 100644 --- a/fs/erofs/inode.c +++ b/fs/erofs/inode.c @@ -15,11 +15,11 @@ static void *erofs_read_inode(struct erofs_buf *buf, struct erofs_sb_info *sbi = EROFS_SB(sb); struct erofs_inode *vi = EROFS_I(inode); const erofs_off_t inode_loc = erofs_iloc(inode); - erofs_blk_t blkaddr, nblks = 0; void *kaddr; struct erofs_inode_compact *dic; struct erofs_inode_extended *die, *copied = NULL; + union erofs_inode_i_u iu; unsigned int ifmt; int err; @@ -35,9 +35,8 @@ static void *erofs_read_inode(struct erofs_buf *buf, dic = kaddr + *ofs; ifmt = le16_to_cpu(dic->i_format); - if (ifmt & ~EROFS_I_ALL) { - erofs_err(inode->i_sb, "unsupported i_format %u of nid %llu", + erofs_err(sb, "unsupported i_format %u of nid %llu", ifmt, vi->nid); err = -EOPNOTSUPP; goto err_out; @@ -45,7 +44,7 @@ static void *erofs_read_inode(struct erofs_buf *buf, vi->datalayout = erofs_inode_datalayout(ifmt); if (vi->datalayout >= EROFS_INODE_DATALAYOUT_MAX) { - erofs_err(inode->i_sb, "unsupported datalayout %u of nid %llu", + erofs_err(sb, "unsupported datalayout %u of nid %llu", vi->datalayout, vi->nid); err = -EOPNOTSUPP; goto err_out; @@ -82,40 +81,15 @@ static void *erofs_read_inode(struct erofs_buf *buf, vi->xattr_isize = erofs_xattr_ibody_size(die->i_xattr_icount); inode->i_mode = le16_to_cpu(die->i_mode); - switch (inode->i_mode & S_IFMT) { - case S_IFREG: - case S_IFDIR: - case S_IFLNK: - vi->raw_blkaddr = le32_to_cpu(die->i_u.raw_blkaddr); - break; - case S_IFCHR: - case S_IFBLK: - inode->i_rdev = - new_decode_dev(le32_to_cpu(die->i_u.rdev)); - break; - case S_IFIFO: - case S_IFSOCK: - inode->i_rdev = 0; - break; - default: - goto bogusimode; - } + iu = die->i_u; i_uid_write(inode, le32_to_cpu(die->i_uid)); i_gid_write(inode, le32_to_cpu(die->i_gid)); set_nlink(inode, le32_to_cpu(die->i_nlink)); - - /* extended inode has its own timestamp */ + /* each extended inode has its own timestamp */ inode_set_ctime(inode, le64_to_cpu(die->i_mtime), le32_to_cpu(die->i_mtime_nsec)); inode->i_size = le64_to_cpu(die->i_size); - - /* total blocks for compressed files */ - if (erofs_inode_is_data_compressed(vi->datalayout)) - nblks = le32_to_cpu(die->i_u.compressed_blocks); - else if (vi->datalayout == EROFS_INODE_CHUNK_BASED) - /* fill chunked inode summary info */ - vi->chunkformat = le16_to_cpu(die->i_u.c.format); kfree(copied); copied = NULL; break; @@ -125,49 +99,51 @@ static void *erofs_read_inode(struct erofs_buf *buf, vi->xattr_isize = erofs_xattr_ibody_size(dic->i_xattr_icount); inode->i_mode = le16_to_cpu(dic->i_mode); - switch (inode->i_mode & S_IFMT) { - case S_IFREG: - case S_IFDIR: - case S_IFLNK: - vi->raw_blkaddr = le32_to_cpu(dic->i_u.raw_blkaddr); - break; - case S_IFCHR: - case S_IFBLK: - inode->i_rdev = - new_decode_dev(le32_to_cpu(dic->i_u.rdev)); - break; - case S_IFIFO: - case S_IFSOCK: - inode->i_rdev = 0; - break; - default: - goto bogusimode; - } + iu = dic->i_u; i_uid_write(inode, le16_to_cpu(dic->i_uid)); i_gid_write(inode, le16_to_cpu(dic->i_gid)); set_nlink(inode, le16_to_cpu(dic->i_nlink)); - /* use build time for compact inodes */ inode_set_ctime(inode, sbi->build_time, sbi->build_time_nsec); inode->i_size = le32_to_cpu(dic->i_size); - if (erofs_inode_is_data_compressed(vi->datalayout)) - nblks = le32_to_cpu(dic->i_u.compressed_blocks); - else if (vi->datalayout == EROFS_INODE_CHUNK_BASED) - vi->chunkformat = le16_to_cpu(dic->i_u.c.format); break; default: - erofs_err(inode->i_sb, - "unsupported on-disk inode version %u of nid %llu", + erofs_err(sb, "unsupported on-disk inode version %u of nid %llu", erofs_inode_version(ifmt), vi->nid); err = -EOPNOTSUPP; goto err_out; } - if (vi->datalayout == EROFS_INODE_CHUNK_BASED) { + switch (inode->i_mode & S_IFMT) { + case S_IFREG: + case S_IFDIR: + case S_IFLNK: + vi->raw_blkaddr = le32_to_cpu(iu.raw_blkaddr); + break; + case S_IFCHR: + case S_IFBLK: + inode->i_rdev = new_decode_dev(le32_to_cpu(iu.rdev)); + break; + case S_IFIFO: + case S_IFSOCK: + inode->i_rdev = 0; + break; + default: + erofs_err(sb, "bogus i_mode (%o) @ nid %llu", inode->i_mode, + vi->nid); + err = -EFSCORRUPTED; + goto err_out; + } + + /* total blocks for compressed files */ + if (erofs_inode_is_data_compressed(vi->datalayout)) { + nblks = le32_to_cpu(iu.compressed_blocks); + } else if (vi->datalayout == EROFS_INODE_CHUNK_BASED) { + /* fill chunked inode summary info */ + vi->chunkformat = le16_to_cpu(iu.c.format); if (vi->chunkformat & ~EROFS_CHUNK_FORMAT_ALL) { - erofs_err(inode->i_sb, - "unsupported chunk format %x of nid %llu", + erofs_err(sb, "unsupported chunk format %x of nid %llu", vi->chunkformat, vi->nid); err = -EOPNOTSUPP; goto err_out; @@ -191,10 +167,6 @@ static void *erofs_read_inode(struct erofs_buf *buf, inode->i_blocks = nblks << (sb->s_blocksize_bits - 9); return kaddr; -bogusimode: - erofs_err(inode->i_sb, "bogus i_mode (%o) @ nid %llu", - inode->i_mode, vi->nid); - err = -EFSCORRUPTED; err_out: DBG_BUGON(1); kfree(copied); -- cgit v1.2.3 From 8bd90b6ae7856dd5000b75691d905b39b9ea5d6b Mon Sep 17 00:00:00 2001 From: Jingbo Xu Date: Tue, 14 Nov 2023 15:07:04 +0800 Subject: erofs: fix NULL dereference of dif->bdev_handle in fscache mode Avoid NULL dereference of dif->bdev_handle, as dif->bdev_handle is NULL in fscache mode. BUG: kernel NULL pointer dereference, address: 0000000000000000 RIP: 0010:erofs_map_dev+0xbd/0x1c0 Call Trace: erofs_fscache_data_read_slice+0xa7/0x340 erofs_fscache_data_read+0x11/0x30 erofs_fscache_readahead+0xd9/0x100 read_pages+0x47/0x1f0 page_cache_ra_order+0x1e5/0x270 filemap_get_pages+0xf2/0x5f0 filemap_read+0xb8/0x2e0 vfs_read+0x18d/0x2b0 ksys_read+0x53/0xd0 do_syscall_64+0x42/0xf0 entry_SYSCALL_64_after_hwframe+0x6e/0x76 Reported-by: Yiqun Leng Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=7245 Fixes: 49845720080d ("erofs: Convert to use bdev_open_by_path()") Signed-off-by: Jingbo Xu Reviewed-by: Gao Xiang Reviewed-by: Yue Hu Reviewed-by: Chao Yu Link: https://lore.kernel.org/r/20231114070704.23398-1-jefflexu@linux.alibaba.com Signed-off-by: Gao Xiang --- fs/erofs/data.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/fs/erofs/data.c b/fs/erofs/data.c index 029c761670bf..c98aeda8abb2 100644 --- a/fs/erofs/data.c +++ b/fs/erofs/data.c @@ -220,7 +220,7 @@ int erofs_map_dev(struct super_block *sb, struct erofs_map_dev *map) up_read(&devs->rwsem); return 0; } - map->m_bdev = dif->bdev_handle->bdev; + map->m_bdev = dif->bdev_handle ? dif->bdev_handle->bdev : NULL; map->m_daxdev = dif->dax_dev; map->m_dax_part_off = dif->dax_part_off; map->m_fscache = dif->fscache; @@ -238,7 +238,8 @@ int erofs_map_dev(struct super_block *sb, struct erofs_map_dev *map) if (map->m_pa >= startoff && map->m_pa < startoff + length) { map->m_pa -= startoff; - map->m_bdev = dif->bdev_handle->bdev; + map->m_bdev = dif->bdev_handle ? + dif->bdev_handle->bdev : NULL; map->m_daxdev = dif->dax_dev; map->m_dax_part_off = dif->dax_part_off; map->m_fscache = dif->fscache; -- cgit v1.2.3 From 62b241efff99fc4d88a86f1c67c7516e31f432a3 Mon Sep 17 00:00:00 2001 From: Gao Xiang Date: Fri, 17 Nov 2023 16:53:29 +0800 Subject: MAINTAINERS: erofs: add EROFS webpage Add a new `W:` field of the EROFS entry points to the documentation site at . In addition, update the in-tree documentation and Kconfig too. Signed-off-by: Gao Xiang Link: https://lore.kernel.org/r/20231117085329.1624223-1-hsiangkao@linux.alibaba.com --- Documentation/filesystems/erofs.rst | 4 ++++ MAINTAINERS | 1 + fs/erofs/Kconfig | 2 +- 3 files changed, 6 insertions(+), 1 deletion(-) diff --git a/Documentation/filesystems/erofs.rst b/Documentation/filesystems/erofs.rst index 57c6ae23b3fc..cc4626d6ee4f 100644 --- a/Documentation/filesystems/erofs.rst +++ b/Documentation/filesystems/erofs.rst @@ -91,6 +91,10 @@ compatibility checking tool (fsck.erofs), and a debugging tool (dump.erofs): - git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs-utils.git +For more information, please also refer to the documentation site: + +- https://erofs.docs.kernel.org + Bugs and patches are welcome, please kindly help us and send to the following linux-erofs mailing list: diff --git a/MAINTAINERS b/MAINTAINERS index 97f51d5ec1cf..cf39d16ad22a 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -7855,6 +7855,7 @@ R: Yue Hu R: Jeffle Xu L: linux-erofs@lists.ozlabs.org S: Maintained +W: https://erofs.docs.kernel.org T: git git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs.git F: Documentation/ABI/testing/sysfs-fs-erofs F: Documentation/filesystems/erofs.rst diff --git a/fs/erofs/Kconfig b/fs/erofs/Kconfig index e540648dedc2..1d318f85232d 100644 --- a/fs/erofs/Kconfig +++ b/fs/erofs/Kconfig @@ -21,7 +21,7 @@ config EROFS_FS performance under extremely memory pressure without extra cost. See the documentation at - for more details. + and the web pages at for more details. If unsure, say N. -- cgit v1.2.3 From d5c65be34df73fa01ed05611aafb73b440d89e29 Mon Sep 17 00:00:00 2001 From: Kamil Duljas Date: Thu, 16 Nov 2023 13:51:50 +0100 Subject: ASoC: Intel: Skylake: Fix mem leak in few functions MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The resources should be freed when function return error. Signed-off-by: Kamil Duljas Reviewed-by: Amadeusz Sławiński Link: https://lore.kernel.org/r/20231116125150.1436-1-kamil.duljas@gmail.com Signed-off-by: Mark Brown --- sound/soc/intel/skylake/skl-pcm.c | 4 +++- sound/soc/intel/skylake/skl-sst-ipc.c | 4 +++- 2 files changed, 6 insertions(+), 2 deletions(-) diff --git a/sound/soc/intel/skylake/skl-pcm.c b/sound/soc/intel/skylake/skl-pcm.c index d0c02e8a6785..18866bc415a5 100644 --- a/sound/soc/intel/skylake/skl-pcm.c +++ b/sound/soc/intel/skylake/skl-pcm.c @@ -240,8 +240,10 @@ static int skl_pcm_open(struct snd_pcm_substream *substream, snd_pcm_set_sync(substream); mconfig = skl_tplg_fe_get_cpr_module(dai, substream->stream); - if (!mconfig) + if (!mconfig) { + kfree(dma_params); return -EINVAL; + } skl_tplg_d0i3_get(skl, mconfig->d0i3_caps); diff --git a/sound/soc/intel/skylake/skl-sst-ipc.c b/sound/soc/intel/skylake/skl-sst-ipc.c index 7a425271b08b..fd9624ad5f72 100644 --- a/sound/soc/intel/skylake/skl-sst-ipc.c +++ b/sound/soc/intel/skylake/skl-sst-ipc.c @@ -1003,8 +1003,10 @@ int skl_ipc_get_large_config(struct sst_generic_ipc *ipc, reply.size = (reply.header >> 32) & IPC_DATA_OFFSET_SZ_MASK; buf = krealloc(reply.data, reply.size, GFP_KERNEL); - if (!buf) + if (!buf) { + kfree(reply.data); return -ENOMEM; + } *payload = buf; *bytes = reply.size; -- cgit v1.2.3 From c1501f2597dd08601acd42256a4b0a0fc36bf302 Mon Sep 17 00:00:00 2001 From: David Lin Date: Fri, 17 Nov 2023 12:30:12 +0800 Subject: ASoC: nau8822: Fix incorrect type in assignment and cast to restricted __be16 This issue is reproduced when W=1 build in compiler gcc-12. The following are sparse warnings: sound/soc/codecs/nau8822.c:199:25: sparse: sparse: incorrect type in assignment sound/soc/codecs/nau8822.c:199:25: sparse: expected unsigned short sound/soc/codecs/nau8822.c:199:25: sparse: got restricted __be16 sound/soc/codecs/nau8822.c:235:25: sparse: sparse: cast to restricted __be16 sound/soc/codecs/nau8822.c:235:25: sparse: sparse: cast to restricted __be16 sound/soc/codecs/nau8822.c:235:25: sparse: sparse: cast to restricted __be16 sound/soc/codecs/nau8822.c:235:25: sparse: sparse: cast to restricted __be16 Reported-by: kernel test robot Closes: https://lore.kernel.org/oe-kbuild-all/202311122320.T1opZVkP-lkp@intel.com/ Signed-off-by: David Lin Link: https://lore.kernel.org/r/20231117043011.1747594-1-CTLIN0@nuvoton.com Signed-off-by: Mark Brown --- sound/soc/codecs/nau8822.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/sound/soc/codecs/nau8822.c b/sound/soc/codecs/nau8822.c index ff3024899f45..7199d734c79f 100644 --- a/sound/soc/codecs/nau8822.c +++ b/sound/soc/codecs/nau8822.c @@ -184,6 +184,7 @@ static int nau8822_eq_get(struct snd_kcontrol *kcontrol, struct soc_bytes_ext *params = (void *)kcontrol->private_value; int i, reg; u16 reg_val, *val; + __be16 tmp; val = (u16 *)ucontrol->value.bytes.data; reg = NAU8822_REG_EQ1; @@ -192,8 +193,8 @@ static int nau8822_eq_get(struct snd_kcontrol *kcontrol, /* conversion of 16-bit integers between native CPU format * and big endian format */ - reg_val = cpu_to_be16(reg_val); - memcpy(val + i, ®_val, sizeof(reg_val)); + tmp = cpu_to_be16(reg_val); + memcpy(val + i, &tmp, sizeof(tmp)); } return 0; @@ -216,6 +217,7 @@ static int nau8822_eq_put(struct snd_kcontrol *kcontrol, void *data; u16 *val, value; int i, reg, ret; + __be16 *tmp; data = kmemdup(ucontrol->value.bytes.data, params->max, GFP_KERNEL | GFP_DMA); @@ -228,7 +230,8 @@ static int nau8822_eq_put(struct snd_kcontrol *kcontrol, /* conversion of 16-bit integers between native CPU format * and big endian format */ - value = be16_to_cpu(*(val + i)); + tmp = (__be16 *)(val + i); + value = be16_to_cpup(tmp); ret = snd_soc_component_write(component, reg + i, value); if (ret) { dev_err(component->dev, -- cgit v1.2.3 From 31e721fbd194d5723722eaa21df1d14cee7e12b5 Mon Sep 17 00:00:00 2001 From: Kamil Duljas Date: Thu, 16 Nov 2023 22:39:17 +0100 Subject: ASoC: SOF: topology: Fix mem leak in sof_dai_load() The function has multiple return points at which it is not released previously allocated memory. Signed-off-by: Kamil Duljas Acked-by: Peter Ujfalusi Link: https://lore.kernel.org/r/20231116213926.2034-2-kamil.duljas@gmail.com Signed-off-by: Mark Brown --- sound/soc/sof/topology.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/sound/soc/sof/topology.c b/sound/soc/sof/topology.c index a3a3af252259..37ec671a2d76 100644 --- a/sound/soc/sof/topology.c +++ b/sound/soc/sof/topology.c @@ -1736,8 +1736,10 @@ static int sof_dai_load(struct snd_soc_component *scomp, int index, /* perform pcm set op */ if (ipc_pcm_ops && ipc_pcm_ops->pcm_setup) { ret = ipc_pcm_ops->pcm_setup(sdev, spcm); - if (ret < 0) + if (ret < 0) { + kfree(spcm); return ret; + } } dai_drv->dobj.private = spcm; -- cgit v1.2.3 From f8ba14b780273fd290ddf7ee0d7d7decb44cc365 Mon Sep 17 00:00:00 2001 From: Kamil Duljas Date: Thu, 16 Nov 2023 23:41:13 +0100 Subject: ASoC: Intel: Skylake: mem leak in skl register function MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit skl_platform_register() uses krealloc. When krealloc is fail, then previous memory is not freed. The leak is also when soc component registration failed. Signed-off-by: Kamil Duljas Reviewed-by: Amadeusz Sławiński Link: https://lore.kernel.org/r/20231116224112.2209-2-kamil.duljas@gmail.com Signed-off-by: Mark Brown --- sound/soc/intel/skylake/skl-pcm.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/sound/soc/intel/skylake/skl-pcm.c b/sound/soc/intel/skylake/skl-pcm.c index 18866bc415a5..174aae6e0398 100644 --- a/sound/soc/intel/skylake/skl-pcm.c +++ b/sound/soc/intel/skylake/skl-pcm.c @@ -1464,6 +1464,7 @@ int skl_platform_register(struct device *dev) dais = krealloc(skl->dais, sizeof(skl_fe_dai) + sizeof(skl_platform_dai), GFP_KERNEL); if (!dais) { + kfree(skl->dais); ret = -ENOMEM; goto err; } @@ -1476,8 +1477,10 @@ int skl_platform_register(struct device *dev) ret = devm_snd_soc_register_component(dev, &skl_component, skl->dais, num_dais); - if (ret) + if (ret) { + kfree(skl->dais); dev_err(dev, "soc component registration failed %d\n", ret); + } err: return ret; } -- cgit v1.2.3 From e7f289a59e76a5890a57bc27b198f69f175f75d9 Mon Sep 17 00:00:00 2001 From: Maciej Strozek Date: Fri, 17 Nov 2023 14:13:38 +0000 Subject: ASoC: cs43130: Fix the position of const qualifier Signed-off-by: Maciej Strozek Acked-by: Charles Keepax Link: https://lore.kernel.org/r/20231117141344.64320-2-mstrozek@opensource.cirrus.com Signed-off-by: Mark Brown --- sound/soc/codecs/cs43130.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/soc/codecs/cs43130.c b/sound/soc/codecs/cs43130.c index 0b40fdfb1825..20f06679b8f7 100644 --- a/sound/soc/codecs/cs43130.c +++ b/sound/soc/codecs/cs43130.c @@ -1682,7 +1682,7 @@ static ssize_t hpload_dc_r_show(struct device *dev, return cs43130_show_dc(dev, buf, HP_RIGHT); } -static u16 const cs43130_ac_freq[CS43130_AC_FREQ] = { +static const u16 cs43130_ac_freq[CS43130_AC_FREQ] = { 24, 43, 93, @@ -2362,7 +2362,7 @@ static const struct regmap_config cs43130_regmap = { .use_single_write = true, }; -static u16 const cs43130_dc_threshold[CS43130_DC_THRESHOLD] = { +static const u16 cs43130_dc_threshold[CS43130_DC_THRESHOLD] = { 50, 120, }; -- cgit v1.2.3 From aa7e8e5e4011571022dc06e4d7a2f108feb53d1a Mon Sep 17 00:00:00 2001 From: Maciej Strozek Date: Fri, 17 Nov 2023 14:13:39 +0000 Subject: ASoC: cs43130: Fix incorrect frame delay configuration Signed-off-by: Maciej Strozek Acked-by: Charles Keepax Link: https://lore.kernel.org/r/20231117141344.64320-3-mstrozek@opensource.cirrus.com Signed-off-by: Mark Brown --- sound/soc/codecs/cs43130.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/codecs/cs43130.c b/sound/soc/codecs/cs43130.c index 20f06679b8f7..d8ec325b9cc9 100644 --- a/sound/soc/codecs/cs43130.c +++ b/sound/soc/codecs/cs43130.c @@ -578,7 +578,7 @@ static int cs43130_set_sp_fmt(int dai_id, unsigned int bitwidth_sclk, break; case SND_SOC_DAIFMT_LEFT_J: hi_size = bitwidth_sclk; - frm_delay = 2; + frm_delay = 0; frm_phase = 1; break; case SND_SOC_DAIFMT_DSP_A: -- cgit v1.2.3 From 27b13e209ddca5979847a1b57890e0372c1edcee Mon Sep 17 00:00:00 2001 From: Ming Lei Date: Fri, 17 Nov 2023 10:35:22 +0800 Subject: blk-throttle: fix lockdep warning of "cgroup_mutex or RCU read lock required!" Inside blkg_for_each_descendant_pre(), both css_for_each_descendant_pre() and blkg_lookup() requires RCU read lock, and either cgroup_assert_mutex_or_rcu_locked() or rcu_read_lock_held() is called. Fix the warning by adding rcu read lock. Reported-by: Changhui Zhong Signed-off-by: Ming Lei Link: https://lore.kernel.org/r/20231117023527.3188627-2-ming.lei@redhat.com Signed-off-by: Jens Axboe --- block/blk-throttle.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/block/blk-throttle.c b/block/blk-throttle.c index 13e4377a8b28..16f5766620a4 100644 --- a/block/blk-throttle.c +++ b/block/blk-throttle.c @@ -1320,6 +1320,7 @@ static void tg_conf_updated(struct throtl_grp *tg, bool global) tg_bps_limit(tg, READ), tg_bps_limit(tg, WRITE), tg_iops_limit(tg, READ), tg_iops_limit(tg, WRITE)); + rcu_read_lock(); /* * Update has_rules[] flags for the updated tg's subtree. A tg is * considered to have rules if either the tg itself or any of its @@ -1347,6 +1348,7 @@ static void tg_conf_updated(struct throtl_grp *tg, bool global) this_tg->latency_target = max(this_tg->latency_target, parent_tg->latency_target); } + rcu_read_unlock(); /* * We're already holding queue_lock and know @tg is valid. Let's -- cgit v1.2.3 From 35a99d6557cacbc177314735342f77a2dda41872 Mon Sep 17 00:00:00 2001 From: Ming Lei Date: Fri, 17 Nov 2023 10:35:23 +0800 Subject: blk-cgroup: avoid to warn !rcu_read_lock_held() in blkg_lookup() So far, all callers either holds spin lock or rcu read explicitly, and most of the caller has added WARN_ON_ONCE(!rcu_read_lock_held()) or lockdep_assert_held(&disk->queue->queue_lock). Remove WARN_ON_ONCE(!rcu_read_lock_held()) from blkg_lookup() for killing the false positive warning from blkg_conf_prep(). Reported-by: Changhui Zhong Fixes: 83462a6c971c ("blkcg: Drop unnecessary RCU read [un]locks from blkg_conf_prep/finish()") Signed-off-by: Ming Lei Link: https://lore.kernel.org/r/20231117023527.3188627-3-ming.lei@redhat.com Signed-off-by: Jens Axboe --- block/blk-cgroup.h | 2 -- 1 file changed, 2 deletions(-) diff --git a/block/blk-cgroup.h b/block/blk-cgroup.h index 624c03c8fe64..fd482439afbc 100644 --- a/block/blk-cgroup.h +++ b/block/blk-cgroup.h @@ -249,8 +249,6 @@ static inline struct blkcg_gq *blkg_lookup(struct blkcg *blkcg, { struct blkcg_gq *blkg; - WARN_ON_ONCE(!rcu_read_lock_held()); - if (blkcg == &blkcg_root) return q->root_blkg; -- cgit v1.2.3 From e63a57303599b17290cd8bc48e6f20b24289a8bc Mon Sep 17 00:00:00 2001 From: Ming Lei Date: Fri, 17 Nov 2023 10:35:24 +0800 Subject: blk-cgroup: bypass blkcg_deactivate_policy after destroying blkcg_deactivate_policy() can be called after blkg_destroy_all() returns, and it isn't necessary since blkg_destroy_all has covered policy deactivation. Signed-off-by: Ming Lei Link: https://lore.kernel.org/r/20231117023527.3188627-4-ming.lei@redhat.com Signed-off-by: Jens Axboe --- block/blk-cgroup.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/block/blk-cgroup.c b/block/blk-cgroup.c index 4a42ea2972ad..4b48c2c44098 100644 --- a/block/blk-cgroup.c +++ b/block/blk-cgroup.c @@ -577,6 +577,7 @@ static void blkg_destroy_all(struct gendisk *disk) struct request_queue *q = disk->queue; struct blkcg_gq *blkg, *n; int count = BLKG_DESTROY_BATCH_SIZE; + int i; restart: spin_lock_irq(&q->queue_lock); @@ -602,6 +603,18 @@ restart: } } + /* + * Mark policy deactivated since policy offline has been done, and + * the free is scheduled, so future blkcg_deactivate_policy() can + * be bypassed + */ + for (i = 0; i < BLKCG_MAX_POLS; i++) { + struct blkcg_policy *pol = blkcg_policy[i]; + + if (pol) + __clear_bit(pol->plid, q->blkcg_pols); + } + q->root_blkg = NULL; spin_unlock_irq(&q->queue_lock); } -- cgit v1.2.3 From 6fc45b6ed921dc00dfb264dc08c7d67ee63d2656 Mon Sep 17 00:00:00 2001 From: Mikulas Patocka Date: Fri, 17 Nov 2023 18:21:14 +0100 Subject: dm-delay: fix a race between delay_presuspend and delay_bio In delay_presuspend, we set the atomic variable may_delay and then stop the timer and flush pending bios. The intention here is to prevent the delay target from re-arming the timer again. However, this test is racy. Suppose that one thread goes to delay_bio, sees that dc->may_delay is one and proceeds; now, another thread executes delay_presuspend, it sets dc->may_delay to zero, deletes the timer and flushes pending bios. Then, the first thread continues and adds the bio to delayed->list despite the fact that dc->may_delay is false. Fix this bug by changing may_delay's type from atomic_t to bool and only access it while holding the delayed_bios_lock mutex. Note that we don't have to grab the mutex in delay_resume because there are no bios in flight at this point. Signed-off-by: Mikulas Patocka Cc: stable@vger.kernel.org Signed-off-by: Mike Snitzer --- drivers/md/dm-delay.c | 16 +++++++++++----- 1 file changed, 11 insertions(+), 5 deletions(-) diff --git a/drivers/md/dm-delay.c b/drivers/md/dm-delay.c index efd510984e25..2d6b900e4353 100644 --- a/drivers/md/dm-delay.c +++ b/drivers/md/dm-delay.c @@ -33,7 +33,7 @@ struct delay_c { struct work_struct flush_expired_bios; struct list_head delayed_bios; struct task_struct *worker; - atomic_t may_delay; + bool may_delay; struct delay_class read; struct delay_class write; @@ -236,7 +236,7 @@ static int delay_ctr(struct dm_target *ti, unsigned int argc, char **argv) ti->private = dc; INIT_LIST_HEAD(&dc->delayed_bios); - atomic_set(&dc->may_delay, 1); + dc->may_delay = true; dc->argc = argc; ret = delay_class_ctr(ti, &dc->read, argv); @@ -312,7 +312,7 @@ static int delay_bio(struct delay_c *dc, struct delay_class *c, struct bio *bio) struct dm_delay_info *delayed; unsigned long expires = 0; - if (!c->delay || !atomic_read(&dc->may_delay)) + if (!c->delay) return DM_MAPIO_REMAPPED; delayed = dm_per_bio_data(bio, sizeof(struct dm_delay_info)); @@ -321,6 +321,10 @@ static int delay_bio(struct delay_c *dc, struct delay_class *c, struct bio *bio) delayed->expires = expires = jiffies + msecs_to_jiffies(c->delay); mutex_lock(&delayed_bios_lock); + if (unlikely(!dc->may_delay)) { + mutex_unlock(&delayed_bios_lock); + return DM_MAPIO_REMAPPED; + } c->ops++; list_add_tail(&delayed->list, &dc->delayed_bios); mutex_unlock(&delayed_bios_lock); @@ -337,7 +341,9 @@ static void delay_presuspend(struct dm_target *ti) { struct delay_c *dc = ti->private; - atomic_set(&dc->may_delay, 0); + mutex_lock(&delayed_bios_lock); + dc->may_delay = false; + mutex_unlock(&delayed_bios_lock); if (delay_is_fast(dc)) flush_delayed_bios_fast(dc, true); @@ -351,7 +357,7 @@ static void delay_resume(struct dm_target *ti) { struct delay_c *dc = ti->private; - atomic_set(&dc->may_delay, 1); + dc->may_delay = true; } static int delay_map(struct dm_target *ti, struct bio *bio) -- cgit v1.2.3 From 38cfff568169ff9f99784948f79f62ca1af5a187 Mon Sep 17 00:00:00 2001 From: Mikulas Patocka Date: Fri, 17 Nov 2023 18:22:47 +0100 Subject: dm-delay: fix bugs introduced by kthread mode This commit fixes the following bugs introduced by commit 70bbeb29fab0 ("dm delay: for short delays, use kthread instead of timers and wq"): * the function flush_worker_fn has no exit path - on unload, this function will just loop and consume 100% CPU without any progress * the wake-up mechanism in flush_worker_fn is racy - a wake up will be missed if the process adds entries to the delayed_bios list just before set_current_state(TASK_INTERRUPTIBLE) * flush_delayed_bios_fast submits a bio while holding a global mutex; this may deadlock if we have multiple stacked dm-delay devices and the underlying device attempts to acquire the mutex too * if the target constructor fails, it will call delay_dtr. delay_dtr would attempt to free dc->timer_lock without it being initialized by the constructor. * if the target constructor's kthread allocation fails, delay_dtr would crash trying to dereference dc->worker because it is non-NULL due to ERR_PTR. Fixes: 70bbeb29fab0 ("dm delay: for short delays, use kthread instead of timers and wq") Signed-off-by: Mikulas Patocka Signed-off-by: Mike Snitzer --- drivers/md/dm-delay.c | 61 +++++++++++++++++++++++++++++---------------------- 1 file changed, 35 insertions(+), 26 deletions(-) diff --git a/drivers/md/dm-delay.c b/drivers/md/dm-delay.c index 2d6b900e4353..00c09d9fffeb 100644 --- a/drivers/md/dm-delay.c +++ b/drivers/md/dm-delay.c @@ -73,9 +73,23 @@ static inline bool delay_is_fast(struct delay_c *dc) return !!dc->worker; } +static void flush_bios(struct bio *bio) +{ + struct bio *n; + + while (bio) { + n = bio->bi_next; + bio->bi_next = NULL; + dm_submit_bio_remap(bio, NULL); + bio = n; + } +} + static void flush_delayed_bios_fast(struct delay_c *dc, bool flush_all) { struct dm_delay_info *delayed, *next; + struct bio_list flush_bio_list; + bio_list_init(&flush_bio_list); mutex_lock(&delayed_bios_lock); list_for_each_entry_safe(delayed, next, &dc->delayed_bios, list) { @@ -83,47 +97,42 @@ static void flush_delayed_bios_fast(struct delay_c *dc, bool flush_all) struct bio *bio = dm_bio_from_per_bio_data(delayed, sizeof(struct dm_delay_info)); list_del(&delayed->list); - dm_submit_bio_remap(bio, NULL); + bio_list_add(&flush_bio_list, bio); delayed->class->ops--; } } mutex_unlock(&delayed_bios_lock); + + flush_bios(bio_list_get(&flush_bio_list)); } static int flush_worker_fn(void *data) { struct delay_c *dc = data; - while (1) { + while (!kthread_should_stop()) { flush_delayed_bios_fast(dc, false); + mutex_lock(&delayed_bios_lock); if (unlikely(list_empty(&dc->delayed_bios))) { set_current_state(TASK_INTERRUPTIBLE); + mutex_unlock(&delayed_bios_lock); schedule(); - } else + } else { + mutex_unlock(&delayed_bios_lock); cond_resched(); + } } return 0; } -static void flush_bios(struct bio *bio) -{ - struct bio *n; - - while (bio) { - n = bio->bi_next; - bio->bi_next = NULL; - dm_submit_bio_remap(bio, NULL); - bio = n; - } -} - -static struct bio *flush_delayed_bios(struct delay_c *dc, bool flush_all) +static void flush_delayed_bios(struct delay_c *dc, bool flush_all) { struct dm_delay_info *delayed, *next; unsigned long next_expires = 0; unsigned long start_timer = 0; - struct bio_list flush_bios = { }; + struct bio_list flush_bio_list; + bio_list_init(&flush_bio_list); mutex_lock(&delayed_bios_lock); list_for_each_entry_safe(delayed, next, &dc->delayed_bios, list) { @@ -131,7 +140,7 @@ static struct bio *flush_delayed_bios(struct delay_c *dc, bool flush_all) struct bio *bio = dm_bio_from_per_bio_data(delayed, sizeof(struct dm_delay_info)); list_del(&delayed->list); - bio_list_add(&flush_bios, bio); + bio_list_add(&flush_bio_list, bio); delayed->class->ops--; continue; } @@ -147,7 +156,7 @@ static struct bio *flush_delayed_bios(struct delay_c *dc, bool flush_all) if (start_timer) queue_timeout(dc, next_expires); - return bio_list_get(&flush_bios); + flush_bios(bio_list_get(&flush_bio_list)); } static void flush_expired_bios(struct work_struct *work) @@ -158,7 +167,7 @@ static void flush_expired_bios(struct work_struct *work) if (delay_is_fast(dc)) flush_delayed_bios_fast(dc, false); else - flush_bios(flush_delayed_bios(dc, false)); + flush_delayed_bios(dc, false); } static void delay_dtr(struct dm_target *ti) @@ -177,8 +186,7 @@ static void delay_dtr(struct dm_target *ti) if (dc->worker) kthread_stop(dc->worker); - if (!delay_is_fast(dc)) - mutex_destroy(&dc->timer_lock); + mutex_destroy(&dc->timer_lock); kfree(dc); } @@ -236,6 +244,7 @@ static int delay_ctr(struct dm_target *ti, unsigned int argc, char **argv) ti->private = dc; INIT_LIST_HEAD(&dc->delayed_bios); + mutex_init(&dc->timer_lock); dc->may_delay = true; dc->argc = argc; @@ -282,12 +291,12 @@ out: "dm-delay-flush-worker"); if (IS_ERR(dc->worker)) { ret = PTR_ERR(dc->worker); + dc->worker = NULL; goto bad; } } else { timer_setup(&dc->delay_timer, handle_delayed_timer, 0); INIT_WORK(&dc->flush_expired_bios, flush_expired_bios); - mutex_init(&dc->timer_lock); dc->kdelayd_wq = alloc_workqueue("kdelayd", WQ_MEM_RECLAIM, 0); if (!dc->kdelayd_wq) { ret = -EINVAL; @@ -345,11 +354,11 @@ static void delay_presuspend(struct dm_target *ti) dc->may_delay = false; mutex_unlock(&delayed_bios_lock); - if (delay_is_fast(dc)) + if (delay_is_fast(dc)) { flush_delayed_bios_fast(dc, true); - else { + } else { del_timer_sync(&dc->delay_timer); - flush_bios(flush_delayed_bios(dc, true)); + flush_delayed_bios(dc, true); } } -- cgit v1.2.3 From ccadc8a21ef13eb80006ecff6a7466810e4f0dd6 Mon Sep 17 00:00:00 2001 From: Mikulas Patocka Date: Fri, 17 Nov 2023 18:24:04 +0100 Subject: dm-delay: avoid duplicate logic This is small refactoring of dm-delay - we avoid duplicate logic in flush_delayed_bios and flush_delayed_bios_fast and join these two functions into one. We also add cond_resched() to flush_delayed_bios because the list may have unbounded number of entries. Signed-off-by: Mikulas Patocka Signed-off-by: Mike Snitzer --- drivers/md/dm-delay.c | 65 +++++++++++++++++---------------------------------- 1 file changed, 21 insertions(+), 44 deletions(-) diff --git a/drivers/md/dm-delay.c b/drivers/md/dm-delay.c index 00c09d9fffeb..5eabdb06c649 100644 --- a/drivers/md/dm-delay.c +++ b/drivers/md/dm-delay.c @@ -85,24 +85,40 @@ static void flush_bios(struct bio *bio) } } -static void flush_delayed_bios_fast(struct delay_c *dc, bool flush_all) +static void flush_delayed_bios(struct delay_c *dc, bool flush_all) { struct dm_delay_info *delayed, *next; struct bio_list flush_bio_list; + unsigned long next_expires = 0; + bool start_timer = false; bio_list_init(&flush_bio_list); mutex_lock(&delayed_bios_lock); list_for_each_entry_safe(delayed, next, &dc->delayed_bios, list) { + cond_resched(); if (flush_all || time_after_eq(jiffies, delayed->expires)) { struct bio *bio = dm_bio_from_per_bio_data(delayed, sizeof(struct dm_delay_info)); list_del(&delayed->list); bio_list_add(&flush_bio_list, bio); delayed->class->ops--; + continue; + } + + if (!delay_is_fast(dc)) { + if (!start_timer) { + start_timer = true; + next_expires = delayed->expires; + } else { + next_expires = min(next_expires, delayed->expires); + } } } mutex_unlock(&delayed_bios_lock); + if (start_timer) + queue_timeout(dc, next_expires); + flush_bios(bio_list_get(&flush_bio_list)); } @@ -111,7 +127,7 @@ static int flush_worker_fn(void *data) struct delay_c *dc = data; while (!kthread_should_stop()) { - flush_delayed_bios_fast(dc, false); + flush_delayed_bios(dc, false); mutex_lock(&delayed_bios_lock); if (unlikely(list_empty(&dc->delayed_bios))) { set_current_state(TASK_INTERRUPTIBLE); @@ -126,48 +142,12 @@ static int flush_worker_fn(void *data) return 0; } -static void flush_delayed_bios(struct delay_c *dc, bool flush_all) -{ - struct dm_delay_info *delayed, *next; - unsigned long next_expires = 0; - unsigned long start_timer = 0; - struct bio_list flush_bio_list; - bio_list_init(&flush_bio_list); - - mutex_lock(&delayed_bios_lock); - list_for_each_entry_safe(delayed, next, &dc->delayed_bios, list) { - if (flush_all || time_after_eq(jiffies, delayed->expires)) { - struct bio *bio = dm_bio_from_per_bio_data(delayed, - sizeof(struct dm_delay_info)); - list_del(&delayed->list); - bio_list_add(&flush_bio_list, bio); - delayed->class->ops--; - continue; - } - - if (!start_timer) { - start_timer = 1; - next_expires = delayed->expires; - } else - next_expires = min(next_expires, delayed->expires); - } - mutex_unlock(&delayed_bios_lock); - - if (start_timer) - queue_timeout(dc, next_expires); - - flush_bios(bio_list_get(&flush_bio_list)); -} - static void flush_expired_bios(struct work_struct *work) { struct delay_c *dc; dc = container_of(work, struct delay_c, flush_expired_bios); - if (delay_is_fast(dc)) - flush_delayed_bios_fast(dc, false); - else - flush_delayed_bios(dc, false); + flush_delayed_bios(dc, false); } static void delay_dtr(struct dm_target *ti) @@ -354,12 +334,9 @@ static void delay_presuspend(struct dm_target *ti) dc->may_delay = false; mutex_unlock(&delayed_bios_lock); - if (delay_is_fast(dc)) { - flush_delayed_bios_fast(dc, true); - } else { + if (!delay_is_fast(dc)) del_timer_sync(&dc->delay_timer); - flush_delayed_bios(dc, true); - } + flush_delayed_bios(dc, true); } static void delay_resume(struct dm_target *ti) -- cgit v1.2.3 From 2a695062a5a42aead8c539a344168d4806b3fda2 Mon Sep 17 00:00:00 2001 From: Mikulas Patocka Date: Fri, 17 Nov 2023 18:36:34 +0100 Subject: dm-bufio: fix no-sleep mode dm-bufio has a no-sleep mode. When activated (with the DM_BUFIO_CLIENT_NO_SLEEP flag), the bufio client is read-only and we could call dm_bufio_get from tasklets. This is used by dm-verity. Unfortunately, commit 450e8dee51aa ("dm bufio: improve concurrent IO performance") broke this and the kernel would warn that cache_get() was calling down_read() from no-sleeping context. The bug can be reproduced by using "veritysetup open" with the "--use-tasklets" flag. This commit fixes dm-bufio, so that the tasklet mode works again, by expanding use of the 'no_sleep_enabled' static_key to conditionally use either a rw_semaphore or rwlock_t (which are colocated in the buffer_tree structure using a union). Signed-off-by: Mikulas Patocka Cc: stable@vger.kernel.org # v6.4 Fixes: 450e8dee51aa ("dm bufio: improve concurrent IO performance") Signed-off-by: Mike Snitzer --- drivers/md/dm-bufio.c | 87 ++++++++++++++++++++++++++++++++++++--------------- 1 file changed, 62 insertions(+), 25 deletions(-) diff --git a/drivers/md/dm-bufio.c b/drivers/md/dm-bufio.c index 62eb27639c9b..f03d7dba270c 100644 --- a/drivers/md/dm-bufio.c +++ b/drivers/md/dm-bufio.c @@ -254,7 +254,7 @@ enum evict_result { typedef enum evict_result (*le_predicate)(struct lru_entry *le, void *context); -static struct lru_entry *lru_evict(struct lru *lru, le_predicate pred, void *context) +static struct lru_entry *lru_evict(struct lru *lru, le_predicate pred, void *context, bool no_sleep) { unsigned long tested = 0; struct list_head *h = lru->cursor; @@ -295,7 +295,8 @@ static struct lru_entry *lru_evict(struct lru *lru, le_predicate pred, void *con h = h->next; - cond_resched(); + if (!no_sleep) + cond_resched(); } return NULL; @@ -382,7 +383,10 @@ struct dm_buffer { */ struct buffer_tree { - struct rw_semaphore lock; + union { + struct rw_semaphore lock; + rwlock_t spinlock; + } u; struct rb_root root; } ____cacheline_aligned_in_smp; @@ -393,9 +397,12 @@ struct dm_buffer_cache { * on the locks. */ unsigned int num_locks; + bool no_sleep; struct buffer_tree trees[]; }; +static DEFINE_STATIC_KEY_FALSE(no_sleep_enabled); + static inline unsigned int cache_index(sector_t block, unsigned int num_locks) { return dm_hash_locks_index(block, num_locks); @@ -403,22 +410,34 @@ static inline unsigned int cache_index(sector_t block, unsigned int num_locks) static inline void cache_read_lock(struct dm_buffer_cache *bc, sector_t block) { - down_read(&bc->trees[cache_index(block, bc->num_locks)].lock); + if (static_branch_unlikely(&no_sleep_enabled) && bc->no_sleep) + read_lock_bh(&bc->trees[cache_index(block, bc->num_locks)].u.spinlock); + else + down_read(&bc->trees[cache_index(block, bc->num_locks)].u.lock); } static inline void cache_read_unlock(struct dm_buffer_cache *bc, sector_t block) { - up_read(&bc->trees[cache_index(block, bc->num_locks)].lock); + if (static_branch_unlikely(&no_sleep_enabled) && bc->no_sleep) + read_unlock_bh(&bc->trees[cache_index(block, bc->num_locks)].u.spinlock); + else + up_read(&bc->trees[cache_index(block, bc->num_locks)].u.lock); } static inline void cache_write_lock(struct dm_buffer_cache *bc, sector_t block) { - down_write(&bc->trees[cache_index(block, bc->num_locks)].lock); + if (static_branch_unlikely(&no_sleep_enabled) && bc->no_sleep) + write_lock_bh(&bc->trees[cache_index(block, bc->num_locks)].u.spinlock); + else + down_write(&bc->trees[cache_index(block, bc->num_locks)].u.lock); } static inline void cache_write_unlock(struct dm_buffer_cache *bc, sector_t block) { - up_write(&bc->trees[cache_index(block, bc->num_locks)].lock); + if (static_branch_unlikely(&no_sleep_enabled) && bc->no_sleep) + write_unlock_bh(&bc->trees[cache_index(block, bc->num_locks)].u.spinlock); + else + up_write(&bc->trees[cache_index(block, bc->num_locks)].u.lock); } /* @@ -442,18 +461,32 @@ static void lh_init(struct lock_history *lh, struct dm_buffer_cache *cache, bool static void __lh_lock(struct lock_history *lh, unsigned int index) { - if (lh->write) - down_write(&lh->cache->trees[index].lock); - else - down_read(&lh->cache->trees[index].lock); + if (lh->write) { + if (static_branch_unlikely(&no_sleep_enabled) && lh->cache->no_sleep) + write_lock_bh(&lh->cache->trees[index].u.spinlock); + else + down_write(&lh->cache->trees[index].u.lock); + } else { + if (static_branch_unlikely(&no_sleep_enabled) && lh->cache->no_sleep) + read_lock_bh(&lh->cache->trees[index].u.spinlock); + else + down_read(&lh->cache->trees[index].u.lock); + } } static void __lh_unlock(struct lock_history *lh, unsigned int index) { - if (lh->write) - up_write(&lh->cache->trees[index].lock); - else - up_read(&lh->cache->trees[index].lock); + if (lh->write) { + if (static_branch_unlikely(&no_sleep_enabled) && lh->cache->no_sleep) + write_unlock_bh(&lh->cache->trees[index].u.spinlock); + else + up_write(&lh->cache->trees[index].u.lock); + } else { + if (static_branch_unlikely(&no_sleep_enabled) && lh->cache->no_sleep) + read_unlock_bh(&lh->cache->trees[index].u.spinlock); + else + up_read(&lh->cache->trees[index].u.lock); + } } /* @@ -502,14 +535,18 @@ static struct dm_buffer *list_to_buffer(struct list_head *l) return le_to_buffer(le); } -static void cache_init(struct dm_buffer_cache *bc, unsigned int num_locks) +static void cache_init(struct dm_buffer_cache *bc, unsigned int num_locks, bool no_sleep) { unsigned int i; bc->num_locks = num_locks; + bc->no_sleep = no_sleep; for (i = 0; i < bc->num_locks; i++) { - init_rwsem(&bc->trees[i].lock); + if (no_sleep) + rwlock_init(&bc->trees[i].u.spinlock); + else + init_rwsem(&bc->trees[i].u.lock); bc->trees[i].root = RB_ROOT; } @@ -648,7 +685,7 @@ static struct dm_buffer *__cache_evict(struct dm_buffer_cache *bc, int list_mode struct lru_entry *le; struct dm_buffer *b; - le = lru_evict(&bc->lru[list_mode], __evict_pred, &w); + le = lru_evict(&bc->lru[list_mode], __evict_pred, &w, bc->no_sleep); if (!le) return NULL; @@ -702,7 +739,7 @@ static void __cache_mark_many(struct dm_buffer_cache *bc, int old_mode, int new_ struct evict_wrapper w = {.lh = lh, .pred = pred, .context = context}; while (true) { - le = lru_evict(&bc->lru[old_mode], __evict_pred, &w); + le = lru_evict(&bc->lru[old_mode], __evict_pred, &w, bc->no_sleep); if (!le) break; @@ -915,10 +952,11 @@ static void cache_remove_range(struct dm_buffer_cache *bc, { unsigned int i; + BUG_ON(bc->no_sleep); for (i = 0; i < bc->num_locks; i++) { - down_write(&bc->trees[i].lock); + down_write(&bc->trees[i].u.lock); __remove_range(bc, &bc->trees[i].root, begin, end, pred, release); - up_write(&bc->trees[i].lock); + up_write(&bc->trees[i].u.lock); } } @@ -979,8 +1017,6 @@ struct dm_bufio_client { struct dm_buffer_cache cache; /* must be last member */ }; -static DEFINE_STATIC_KEY_FALSE(no_sleep_enabled); - /*----------------------------------------------------------------*/ #define dm_bufio_in_request() (!!current->bio_list) @@ -1871,7 +1907,8 @@ static void *new_read(struct dm_bufio_client *c, sector_t block, if (need_submit) submit_io(b, REQ_OP_READ, read_endio); - wait_on_bit_io(&b->state, B_READING, TASK_UNINTERRUPTIBLE); + if (nf != NF_GET) /* we already tested this condition above */ + wait_on_bit_io(&b->state, B_READING, TASK_UNINTERRUPTIBLE); if (b->read_error) { int error = blk_status_to_errno(b->read_error); @@ -2421,7 +2458,7 @@ struct dm_bufio_client *dm_bufio_client_create(struct block_device *bdev, unsign r = -ENOMEM; goto bad_client; } - cache_init(&c->cache, num_locks); + cache_init(&c->cache, num_locks, (flags & DM_BUFIO_CLIENT_NO_SLEEP) != 0); c->bdev = bdev; c->block_size = block_size; -- cgit v1.2.3 From 28f07f2ab4b3a2714f1fefcc58ada4bcc195f806 Mon Sep 17 00:00:00 2001 From: Mikulas Patocka Date: Fri, 17 Nov 2023 18:37:25 +0100 Subject: dm-verity: don't use blocking calls from tasklets The commit 5721d4e5a9cd enhanced dm-verity, so that it can verify blocks from tasklets rather than from workqueues. This reportedly improves performance significantly. However, dm-verity was using the flag CRYPTO_TFM_REQ_MAY_SLEEP from tasklets which resulted in warnings about sleeping function being called from non-sleeping context. BUG: sleeping function called from invalid context at crypto/internal.h:206 in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 14, name: ksoftirqd/0 preempt_count: 100, expected: 0 RCU nest depth: 0, expected: 0 CPU: 0 PID: 14 Comm: ksoftirqd/0 Tainted: G W 6.7.0-rc1 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014 Call Trace: dump_stack_lvl+0x32/0x50 __might_resched+0x110/0x160 crypto_hash_walk_done+0x54/0xb0 shash_ahash_update+0x51/0x60 verity_hash_update.isra.0+0x4a/0x130 [dm_verity] verity_verify_io+0x165/0x550 [dm_verity] ? free_unref_page+0xdf/0x170 ? psi_group_change+0x113/0x390 verity_tasklet+0xd/0x70 [dm_verity] tasklet_action_common.isra.0+0xb3/0xc0 __do_softirq+0xaf/0x1ec ? smpboot_thread_fn+0x1d/0x200 ? sort_range+0x20/0x20 run_ksoftirqd+0x15/0x30 smpboot_thread_fn+0xed/0x200 kthread+0xdc/0x110 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x28/0x40 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork_asm+0x11/0x20 This commit fixes dm-verity so that it doesn't use the flags CRYPTO_TFM_REQ_MAY_SLEEP and CRYPTO_TFM_REQ_MAY_BACKLOG from tasklets. The crypto API would do GFP_ATOMIC allocation instead, it could return -ENOMEM and we catch -ENOMEM in verity_tasklet and requeue the request to the workqueue. Signed-off-by: Mikulas Patocka Cc: stable@vger.kernel.org # v6.0+ Fixes: 5721d4e5a9cd ("dm verity: Add optional "try_verify_in_tasklet" feature") Signed-off-by: Mike Snitzer --- drivers/md/dm-verity-fec.c | 4 ++-- drivers/md/dm-verity-target.c | 23 ++++++++++++----------- drivers/md/dm-verity.h | 2 +- 3 files changed, 15 insertions(+), 14 deletions(-) diff --git a/drivers/md/dm-verity-fec.c b/drivers/md/dm-verity-fec.c index 3ef9f018da60..2099c755119e 100644 --- a/drivers/md/dm-verity-fec.c +++ b/drivers/md/dm-verity-fec.c @@ -185,7 +185,7 @@ static int fec_is_erasure(struct dm_verity *v, struct dm_verity_io *io, { if (unlikely(verity_hash(v, verity_io_hash_req(v, io), data, 1 << v->data_dev_block_bits, - verity_io_real_digest(v, io)))) + verity_io_real_digest(v, io), true))) return 0; return memcmp(verity_io_real_digest(v, io), want_digest, @@ -386,7 +386,7 @@ static int fec_decode_rsb(struct dm_verity *v, struct dm_verity_io *io, /* Always re-validate the corrected block against the expected hash */ r = verity_hash(v, verity_io_hash_req(v, io), fio->output, 1 << v->data_dev_block_bits, - verity_io_real_digest(v, io)); + verity_io_real_digest(v, io), true); if (unlikely(r < 0)) return r; diff --git a/drivers/md/dm-verity-target.c b/drivers/md/dm-verity-target.c index 26adcfea0302..e115fcfe723c 100644 --- a/drivers/md/dm-verity-target.c +++ b/drivers/md/dm-verity-target.c @@ -135,20 +135,21 @@ static int verity_hash_update(struct dm_verity *v, struct ahash_request *req, * Wrapper for crypto_ahash_init, which handles verity salting. */ static int verity_hash_init(struct dm_verity *v, struct ahash_request *req, - struct crypto_wait *wait) + struct crypto_wait *wait, bool may_sleep) { int r; ahash_request_set_tfm(req, v->tfm); - ahash_request_set_callback(req, CRYPTO_TFM_REQ_MAY_SLEEP | - CRYPTO_TFM_REQ_MAY_BACKLOG, - crypto_req_done, (void *)wait); + ahash_request_set_callback(req, + may_sleep ? CRYPTO_TFM_REQ_MAY_SLEEP | CRYPTO_TFM_REQ_MAY_BACKLOG : 0, + crypto_req_done, (void *)wait); crypto_init_wait(wait); r = crypto_wait_req(crypto_ahash_init(req), wait); if (unlikely(r < 0)) { - DMERR("crypto_ahash_init failed: %d", r); + if (r != -ENOMEM) + DMERR("crypto_ahash_init failed: %d", r); return r; } @@ -179,12 +180,12 @@ out: } int verity_hash(struct dm_verity *v, struct ahash_request *req, - const u8 *data, size_t len, u8 *digest) + const u8 *data, size_t len, u8 *digest, bool may_sleep) { int r; struct crypto_wait wait; - r = verity_hash_init(v, req, &wait); + r = verity_hash_init(v, req, &wait, may_sleep); if (unlikely(r < 0)) goto out; @@ -322,7 +323,7 @@ static int verity_verify_level(struct dm_verity *v, struct dm_verity_io *io, r = verity_hash(v, verity_io_hash_req(v, io), data, 1 << v->hash_dev_block_bits, - verity_io_real_digest(v, io)); + verity_io_real_digest(v, io), !io->in_tasklet); if (unlikely(r < 0)) goto release_ret_r; @@ -556,7 +557,7 @@ static int verity_verify_io(struct dm_verity_io *io) continue; } - r = verity_hash_init(v, req, &wait); + r = verity_hash_init(v, req, &wait, !io->in_tasklet); if (unlikely(r < 0)) return r; @@ -652,7 +653,7 @@ static void verity_tasklet(unsigned long data) io->in_tasklet = true; err = verity_verify_io(io); - if (err == -EAGAIN) { + if (err == -EAGAIN || err == -ENOMEM) { /* fallback to retrying with work-queue */ INIT_WORK(&io->work, verity_work); queue_work(io->v->verify_wq, &io->work); @@ -1033,7 +1034,7 @@ static int verity_alloc_zero_digest(struct dm_verity *v) goto out; r = verity_hash(v, req, zero_data, 1 << v->data_dev_block_bits, - v->zero_digest); + v->zero_digest, true); out: kfree(req); diff --git a/drivers/md/dm-verity.h b/drivers/md/dm-verity.h index 2f555b420367..f96f4e281ee4 100644 --- a/drivers/md/dm-verity.h +++ b/drivers/md/dm-verity.h @@ -128,7 +128,7 @@ extern int verity_for_bv_block(struct dm_verity *v, struct dm_verity_io *io, u8 *data, size_t len)); extern int verity_hash(struct dm_verity *v, struct ahash_request *req, - const u8 *data, size_t len, u8 *digest); + const u8 *data, size_t len, u8 *digest, bool may_sleep); extern int verity_hash_for_block(struct dm_verity *v, struct dm_verity_io *io, sector_t block, u8 *digest, bool *is_zero); -- cgit v1.2.3 From 13648e04a9b831b3dfa5cf3887dfa6cf8fe5fe69 Mon Sep 17 00:00:00 2001 From: Mikulas Patocka Date: Fri, 17 Nov 2023 18:38:33 +0100 Subject: dm-crypt: start allocating with MAX_ORDER Commit 23baf831a32c ("mm, treewide: redefine MAX_ORDER sanely") changed the meaning of MAX_ORDER from exclusive to inclusive. So, we can allocate compound pages with up to 1 << MAX_ORDER pages. Reflect this change in dm-crypt and start trying to allocate compound pages with MAX_ORDER. Signed-off-by: Mikulas Patocka Signed-off-by: Mike Snitzer --- drivers/md/dm-crypt.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/md/dm-crypt.c b/drivers/md/dm-crypt.c index 6de107aff331..2ae8560b6a14 100644 --- a/drivers/md/dm-crypt.c +++ b/drivers/md/dm-crypt.c @@ -1673,7 +1673,7 @@ static struct bio *crypt_alloc_buffer(struct dm_crypt_io *io, unsigned int size) unsigned int nr_iovecs = (size + PAGE_SIZE - 1) >> PAGE_SHIFT; gfp_t gfp_mask = GFP_NOWAIT | __GFP_HIGHMEM; unsigned int remaining_size; - unsigned int order = MAX_ORDER - 1; + unsigned int order = MAX_ORDER; retry: if (unlikely(gfp_mask & __GFP_DIRECT_RECLAIM)) -- cgit v1.2.3 From bc1b5acb40201a0746d68a7d7cfc141899937f4f Mon Sep 17 00:00:00 2001 From: Mahmoud Adam Date: Fri, 10 Nov 2023 19:21:04 +0100 Subject: nfsd: fix file memleak on client_opens_release seq_release should be called to free the allocated seq_file Cc: stable@vger.kernel.org # v5.3+ Signed-off-by: Mahmoud Adam Reviewed-by: Jeff Layton Fixes: 78599c42ae3c ("nfsd4: add file to display list of client's opens") Reviewed-by: NeilBrown Tested-by: Jeff Layton Signed-off-by: Chuck Lever --- fs/nfsd/nfs4state.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/nfsd/nfs4state.c b/fs/nfsd/nfs4state.c index 65fd5510323a..3709e58f0a4a 100644 --- a/fs/nfsd/nfs4state.c +++ b/fs/nfsd/nfs4state.c @@ -2804,7 +2804,7 @@ static int client_opens_release(struct inode *inode, struct file *file) /* XXX: alternatively, we could get/drop in seq start/stop */ drop_client(clp); - return 0; + return seq_release(inode, file); } static const struct file_operations client_states_fops = { -- cgit v1.2.3 From 49cecd8628a9855cd993792a0377559ea32d5e7c Mon Sep 17 00:00:00 2001 From: Chuck Lever Date: Fri, 10 Nov 2023 11:28:39 -0500 Subject: NFSD: Update nfsd_cache_append() to use xdr_stream When inserting a DRC-cached response into the reply buffer, ensure that the reply buffer's xdr_stream is updated properly. Otherwise the server will send a garbage response. Cc: stable@vger.kernel.org # v6.3+ Reviewed-by: Jeff Layton Tested-by: Jeff Layton Signed-off-by: Chuck Lever --- fs/nfsd/nfscache.c | 23 ++++++++--------------- 1 file changed, 8 insertions(+), 15 deletions(-) diff --git a/fs/nfsd/nfscache.c b/fs/nfsd/nfscache.c index 80621a709510..abb453be71ca 100644 --- a/fs/nfsd/nfscache.c +++ b/fs/nfsd/nfscache.c @@ -640,24 +640,17 @@ void nfsd_cache_update(struct svc_rqst *rqstp, struct nfsd_cacherep *rp, return; } -/* - * Copy cached reply to current reply buffer. Should always fit. - * FIXME as reply is in a page, we should just attach the page, and - * keep a refcount.... - */ static int nfsd_cache_append(struct svc_rqst *rqstp, struct kvec *data) { - struct kvec *vec = &rqstp->rq_res.head[0]; - - if (vec->iov_len + data->iov_len > PAGE_SIZE) { - printk(KERN_WARNING "nfsd: cached reply too large (%zd).\n", - data->iov_len); - return 0; - } - memcpy((char*)vec->iov_base + vec->iov_len, data->iov_base, data->iov_len); - vec->iov_len += data->iov_len; - return 1; + __be32 *p; + + p = xdr_reserve_space(&rqstp->rq_res_stream, data->iov_len); + if (unlikely(!p)) + return false; + memcpy(p, data->iov_base, data->iov_len); + xdr_commit_encode(&rqstp->rq_res_stream); + return true; } /* -- cgit v1.2.3 From 1caf5f61dd8430ae5a0b4538afe4953ce7517cbb Mon Sep 17 00:00:00 2001 From: Chuck Lever Date: Fri, 10 Nov 2023 11:28:33 -0500 Subject: NFSD: Fix "start of NFS reply" pointer passed to nfsd_cache_update() The "statp + 1" pointer that is passed to nfsd_cache_update() is supposed to point to the start of the egress NFS Reply header. In fact, it does point there for AUTH_SYS and RPCSEC_GSS_KRB5 requests. But both krb5i and krb5p add fields between the RPC header's accept_stat field and the start of the NFS Reply header. In those cases, "statp + 1" points at the extra fields instead of the Reply. The result is that nfsd_cache_update() caches what looks to the client like garbage. A connection break can occur for a number of reasons, but the most common reason when using krb5i/p is a GSS sequence number window underrun. When an underrun is detected, the server is obliged to drop the RPC and the connection to force a retransmit with a fresh GSS sequence number. The client presents the same XID, it hits in the server's DRC, and the server returns the garbage cache entry. The "statp + 1" argument has been used since the oldest changeset in the kernel history repo, so it has been in nfsd_dispatch() literally since before history began. The problem arose only when the server-side GSS implementation was added twenty years ago. Reviewed-by: Jeff Layton Tested-by: Jeff Layton --- fs/nfsd/nfssvc.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/fs/nfsd/nfssvc.c b/fs/nfsd/nfssvc.c index d6122bb2d167..b4e4e04f9931 100644 --- a/fs/nfsd/nfssvc.c +++ b/fs/nfsd/nfssvc.c @@ -981,6 +981,7 @@ int nfsd_dispatch(struct svc_rqst *rqstp) const struct svc_procedure *proc = rqstp->rq_procinfo; __be32 *statp = rqstp->rq_accept_statp; struct nfsd_cacherep *rp; + __be32 *nfs_reply; /* * Give the xdr decoder a chance to change this if it wants @@ -1010,6 +1011,7 @@ int nfsd_dispatch(struct svc_rqst *rqstp) goto out_dropit; } + nfs_reply = xdr_inline_decode(&rqstp->rq_res_stream, 0); *statp = proc->pc_func(rqstp); if (test_bit(RQ_DROPME, &rqstp->rq_flags)) goto out_update_drop; @@ -1023,7 +1025,7 @@ int nfsd_dispatch(struct svc_rqst *rqstp) */ smp_store_release(&rqstp->rq_status_counter, rqstp->rq_status_counter + 1); - nfsd_cache_update(rqstp, rp, rqstp->rq_cachetype, statp + 1); + nfsd_cache_update(rqstp, rp, rqstp->rq_cachetype, nfs_reply); out_cached_reply: return 1; -- cgit v1.2.3 From bf51c52a1f3c238d72c64e14d5e7702d3a245b82 Mon Sep 17 00:00:00 2001 From: Chuck Lever Date: Fri, 10 Nov 2023 11:28:45 -0500 Subject: NFSD: Fix checksum mismatches in the duplicate reply cache nfsd_cache_csum() currently assumes that the server's RPC layer has been advancing rq_arg.head[0].iov_base as it decodes an incoming request, because that's the way it used to work. On entry, it expects that buf->head[0].iov_base points to the start of the NFS header, and excludes the already-decoded RPC header. These days however, head[0].iov_base now points to the start of the RPC header during all processing. It no longer points at the NFS Call header when execution arrives at nfsd_cache_csum(). In a retransmitted RPC the XID and the NFS header are supposed to be the same as the original message, but the contents of the retransmitted RPC header can be different. For example, for krb5, the GSS sequence number will be different between the two. Thus if the RPC header is always included in the DRC checksum computation, the checksum of the retransmitted message might not match the checksum of the original message, even though the NFS part of these messages is identical. The result is that, even if a matching XID is found in the DRC, the checksum mismatch causes the server to execute the retransmitted RPC transaction again. Reviewed-by: Jeff Layton Tested-by: Jeff Layton Signed-off-by: Chuck Lever --- fs/nfsd/cache.h | 4 ++-- fs/nfsd/nfscache.c | 64 ++++++++++++++++++++++++++++++++++++------------------ fs/nfsd/nfssvc.c | 10 ++++++++- 3 files changed, 54 insertions(+), 24 deletions(-) diff --git a/fs/nfsd/cache.h b/fs/nfsd/cache.h index 929248c6ca84..4cbe0434cbb8 100644 --- a/fs/nfsd/cache.h +++ b/fs/nfsd/cache.h @@ -84,8 +84,8 @@ int nfsd_net_reply_cache_init(struct nfsd_net *nn); void nfsd_net_reply_cache_destroy(struct nfsd_net *nn); int nfsd_reply_cache_init(struct nfsd_net *); void nfsd_reply_cache_shutdown(struct nfsd_net *); -int nfsd_cache_lookup(struct svc_rqst *rqstp, - struct nfsd_cacherep **cacherep); +int nfsd_cache_lookup(struct svc_rqst *rqstp, unsigned int start, + unsigned int len, struct nfsd_cacherep **cacherep); void nfsd_cache_update(struct svc_rqst *rqstp, struct nfsd_cacherep *rp, int cachetype, __be32 *statp); int nfsd_reply_cache_stats_show(struct seq_file *m, void *v); diff --git a/fs/nfsd/nfscache.c b/fs/nfsd/nfscache.c index abb453be71ca..6cd36af2f97e 100644 --- a/fs/nfsd/nfscache.c +++ b/fs/nfsd/nfscache.c @@ -368,33 +368,52 @@ nfsd_reply_cache_scan(struct shrinker *shrink, struct shrink_control *sc) return freed; } -/* - * Walk an xdr_buf and get a CRC for at most the first RC_CSUMLEN bytes +/** + * nfsd_cache_csum - Checksum incoming NFS Call arguments + * @buf: buffer containing a whole RPC Call message + * @start: starting byte of the NFS Call header + * @remaining: size of the NFS Call header, in bytes + * + * Compute a weak checksum of the leading bytes of an NFS procedure + * call header to help verify that a retransmitted Call matches an + * entry in the duplicate reply cache. + * + * To avoid assumptions about how the RPC message is laid out in + * @buf and what else it might contain (eg, a GSS MIC suffix), the + * caller passes us the exact location and length of the NFS Call + * header. + * + * Returns a 32-bit checksum value, as defined in RFC 793. */ -static __wsum -nfsd_cache_csum(struct svc_rqst *rqstp) +static __wsum nfsd_cache_csum(struct xdr_buf *buf, unsigned int start, + unsigned int remaining) { + unsigned int base, len; + struct xdr_buf subbuf; + __wsum csum = 0; + void *p; int idx; - unsigned int base; - __wsum csum; - struct xdr_buf *buf = &rqstp->rq_arg; - const unsigned char *p = buf->head[0].iov_base; - size_t csum_len = min_t(size_t, buf->head[0].iov_len + buf->page_len, - RC_CSUMLEN); - size_t len = min(buf->head[0].iov_len, csum_len); + + if (remaining > RC_CSUMLEN) + remaining = RC_CSUMLEN; + if (xdr_buf_subsegment(buf, &subbuf, start, remaining)) + return csum; /* rq_arg.head first */ - csum = csum_partial(p, len, 0); - csum_len -= len; + if (subbuf.head[0].iov_len) { + len = min_t(unsigned int, subbuf.head[0].iov_len, remaining); + csum = csum_partial(subbuf.head[0].iov_base, len, csum); + remaining -= len; + } /* Continue into page array */ - idx = buf->page_base / PAGE_SIZE; - base = buf->page_base & ~PAGE_MASK; - while (csum_len) { - p = page_address(buf->pages[idx]) + base; - len = min_t(size_t, PAGE_SIZE - base, csum_len); + idx = subbuf.page_base / PAGE_SIZE; + base = subbuf.page_base & ~PAGE_MASK; + while (remaining) { + p = page_address(subbuf.pages[idx]) + base; + len = min_t(unsigned int, PAGE_SIZE - base, remaining); csum = csum_partial(p, len, csum); - csum_len -= len; + remaining -= len; base = 0; ++idx; } @@ -465,6 +484,8 @@ out: /** * nfsd_cache_lookup - Find an entry in the duplicate reply cache * @rqstp: Incoming Call to find + * @start: starting byte in @rqstp->rq_arg of the NFS Call header + * @len: size of the NFS Call header, in bytes * @cacherep: OUT: DRC entry for this request * * Try to find an entry matching the current call in the cache. When none @@ -478,7 +499,8 @@ out: * %RC_REPLY: Reply from cache * %RC_DROPIT: Do not process the request further */ -int nfsd_cache_lookup(struct svc_rqst *rqstp, struct nfsd_cacherep **cacherep) +int nfsd_cache_lookup(struct svc_rqst *rqstp, unsigned int start, + unsigned int len, struct nfsd_cacherep **cacherep) { struct nfsd_net *nn; struct nfsd_cacherep *rp, *found; @@ -494,7 +516,7 @@ int nfsd_cache_lookup(struct svc_rqst *rqstp, struct nfsd_cacherep **cacherep) goto out; } - csum = nfsd_cache_csum(rqstp); + csum = nfsd_cache_csum(&rqstp->rq_arg, start, len); /* * Since the common case is a cache miss followed by an insert, diff --git a/fs/nfsd/nfssvc.c b/fs/nfsd/nfssvc.c index b4e4e04f9931..fe61d9bbcc1f 100644 --- a/fs/nfsd/nfssvc.c +++ b/fs/nfsd/nfssvc.c @@ -981,6 +981,7 @@ int nfsd_dispatch(struct svc_rqst *rqstp) const struct svc_procedure *proc = rqstp->rq_procinfo; __be32 *statp = rqstp->rq_accept_statp; struct nfsd_cacherep *rp; + unsigned int start, len; __be32 *nfs_reply; /* @@ -989,6 +990,13 @@ int nfsd_dispatch(struct svc_rqst *rqstp) */ rqstp->rq_cachetype = proc->pc_cachetype; + /* + * ->pc_decode advances the argument stream past the NFS + * Call header, so grab the header's starting location and + * size now for the call to nfsd_cache_lookup(). + */ + start = xdr_stream_pos(&rqstp->rq_arg_stream); + len = xdr_stream_remaining(&rqstp->rq_arg_stream); if (!proc->pc_decode(rqstp, &rqstp->rq_arg_stream)) goto out_decode_err; @@ -1002,7 +1010,7 @@ int nfsd_dispatch(struct svc_rqst *rqstp) smp_store_release(&rqstp->rq_status_counter, rqstp->rq_status_counter | 1); rp = NULL; - switch (nfsd_cache_lookup(rqstp, &rp)) { + switch (nfsd_cache_lookup(rqstp, start, len, &rp)) { case RC_DOIT: break; case RC_REPLY: -- cgit v1.2.3 From 6965809e526917b73c8f9178173184dcf13cec4b Mon Sep 17 00:00:00 2001 From: Xuxin Xiong Date: Tue, 14 Nov 2023 12:42:05 +0800 Subject: drm/panel: auo,b101uan08.3: Fine tune the panel power sequence For "auo,b101uan08.3" this panel, it is stipulated in the panel spec that MIPI needs to keep the LP11 state before the lcm_reset pin is pulled high. Fixes: 56ad624b4cb5 ("drm/panel: support for auo, b101uan08.3 wuxga dsi video mode panel") Signed-off-by: Xuxin Xiong Reviewed-by: Douglas Anderson Signed-off-by: Douglas Anderson Link: https://patchwork.freedesktop.org/patch/msgid/20231114044205.613421-1-xuxinxiong@huaqin.corp-partner.google.com --- drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c b/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c index 9323e7b9e384..a287be1aaf70 100644 --- a/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c +++ b/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c @@ -1709,6 +1709,7 @@ static const struct panel_desc auo_b101uan08_3_desc = { .mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_SYNC_PULSE | MIPI_DSI_MODE_LPM, .init_cmds = auo_b101uan08_3_init_cmd, + .lp11_before_reset = true, }; static const struct drm_display_mode boe_tv105wum_nw0_default_mode = { -- cgit v1.2.3 From 56466f653cb59a8f46e991ad1e285f43afdca7d4 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Fri, 13 Oct 2023 11:25:15 +0300 Subject: drm/msm: remove unnecessary NULL check MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This NULL check was required when it was added, but we shuffled the code around and now it's not. The inconsistent NULL checking triggers a Smatch warning: drivers/gpu/drm/msm/disp/mdp5/mdp5_kms.c:847 mdp5_init() warn: variable dereferenced before check 'mdp5_kms' (see line 782) Fixes: 1f50db2f3e1e ("drm/msm/mdp5: move resource allocation to the _probe function") Signed-off-by: Dan Carpenter Reviewed-by: Uwe Kleine-König Reviewed-by: Dmitry Baryshkov Reviewed-by: Abhinav Kumar Patchwork: https://patchwork.freedesktop.org/patch/562559/ Link: https://lore.kernel.org/r/ZSj+6/J6YsoSpLak@kadam Signed-off-by: Abhinav Kumar --- drivers/gpu/drm/msm/disp/mdp5/mdp5_kms.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/gpu/drm/msm/disp/mdp5/mdp5_kms.c b/drivers/gpu/drm/msm/disp/mdp5/mdp5_kms.c index a28fbcd09684..40cda31c8ed1 100644 --- a/drivers/gpu/drm/msm/disp/mdp5/mdp5_kms.c +++ b/drivers/gpu/drm/msm/disp/mdp5/mdp5_kms.c @@ -844,8 +844,7 @@ static int mdp5_init(struct platform_device *pdev, struct drm_device *dev) return 0; fail: - if (mdp5_kms) - mdp5_destroy(mdp5_kms); + mdp5_destroy(mdp5_kms); return ret; } -- cgit v1.2.3 From 8a924db2d7b5eb69ba08b1a0af46e9f1359a9bdf Mon Sep 17 00:00:00 2001 From: Stefan Berger Date: Mon, 2 Oct 2023 08:57:33 -0400 Subject: fs: Pass AT_GETATTR_NOSEC flag to getattr interface function When vfs_getattr_nosec() calls a filesystem's getattr interface function then the 'nosec' should propagate into this function so that vfs_getattr_nosec() can again be called from the filesystem's gettattr rather than vfs_getattr(). The latter would add unnecessary security checks that the initial vfs_getattr_nosec() call wanted to avoid. Therefore, introduce the getattr flag GETATTR_NOSEC and allow to pass with the new getattr_flags parameter to the getattr interface function. In overlayfs and ecryptfs use this flag to determine which one of the two functions to call. In a recent code change introduced to IMA vfs_getattr_nosec() ended up calling vfs_getattr() in overlayfs, which in turn called security_inode_getattr() on an exiting process that did not have current->fs set anymore, which then caused a kernel NULL pointer dereference. With this change the call to security_inode_getattr() can be avoided, thus avoiding the NULL pointer dereference. Reported-by: Fixes: db1d1e8b9867 ("IMA: use vfs_getattr_nosec to get the i_version") Cc: Alexander Viro Cc: Cc: Miklos Szeredi Cc: Amir Goldstein Cc: Tyler Hicks Cc: Mimi Zohar Suggested-by: Christian Brauner Co-developed-by: Amir Goldstein Signed-off-by: Stefan Berger Link: https://lore.kernel.org/r/20231002125733.1251467-1-stefanb@linux.vnet.ibm.com Reviewed-by: Amir Goldstein Signed-off-by: Christian Brauner --- fs/ecryptfs/inode.c | 12 ++++++++++-- fs/overlayfs/inode.c | 10 +++++----- fs/overlayfs/overlayfs.h | 8 ++++++++ fs/stat.c | 6 +++++- include/uapi/linux/fcntl.h | 3 +++ 5 files changed, 31 insertions(+), 8 deletions(-) diff --git a/fs/ecryptfs/inode.c b/fs/ecryptfs/inode.c index a25dd3d20008..b0e8774c435a 100644 --- a/fs/ecryptfs/inode.c +++ b/fs/ecryptfs/inode.c @@ -998,6 +998,14 @@ static int ecryptfs_getattr_link(struct mnt_idmap *idmap, return rc; } +static int ecryptfs_do_getattr(const struct path *path, struct kstat *stat, + u32 request_mask, unsigned int flags) +{ + if (flags & AT_GETATTR_NOSEC) + return vfs_getattr_nosec(path, stat, request_mask, flags); + return vfs_getattr(path, stat, request_mask, flags); +} + static int ecryptfs_getattr(struct mnt_idmap *idmap, const struct path *path, struct kstat *stat, u32 request_mask, unsigned int flags) @@ -1006,8 +1014,8 @@ static int ecryptfs_getattr(struct mnt_idmap *idmap, struct kstat lower_stat; int rc; - rc = vfs_getattr(ecryptfs_dentry_to_lower_path(dentry), &lower_stat, - request_mask, flags); + rc = ecryptfs_do_getattr(ecryptfs_dentry_to_lower_path(dentry), + &lower_stat, request_mask, flags); if (!rc) { fsstack_copy_attr_all(d_inode(dentry), ecryptfs_inode_to_lower(d_inode(dentry))); diff --git a/fs/overlayfs/inode.c b/fs/overlayfs/inode.c index 345b8f161ca4..c63b31a460be 100644 --- a/fs/overlayfs/inode.c +++ b/fs/overlayfs/inode.c @@ -171,7 +171,7 @@ int ovl_getattr(struct mnt_idmap *idmap, const struct path *path, type = ovl_path_real(dentry, &realpath); old_cred = ovl_override_creds(dentry->d_sb); - err = vfs_getattr(&realpath, stat, request_mask, flags); + err = ovl_do_getattr(&realpath, stat, request_mask, flags); if (err) goto out; @@ -196,8 +196,8 @@ int ovl_getattr(struct mnt_idmap *idmap, const struct path *path, (!is_dir ? STATX_NLINK : 0); ovl_path_lower(dentry, &realpath); - err = vfs_getattr(&realpath, &lowerstat, - lowermask, flags); + err = ovl_do_getattr(&realpath, &lowerstat, lowermask, + flags); if (err) goto out; @@ -249,8 +249,8 @@ int ovl_getattr(struct mnt_idmap *idmap, const struct path *path, ovl_path_lowerdata(dentry, &realpath); if (realpath.dentry) { - err = vfs_getattr(&realpath, &lowerdatastat, - lowermask, flags); + err = ovl_do_getattr(&realpath, &lowerdatastat, + lowermask, flags); if (err) goto out; } else { diff --git a/fs/overlayfs/overlayfs.h b/fs/overlayfs/overlayfs.h index ca88b2636a57..05c3dd597fa8 100644 --- a/fs/overlayfs/overlayfs.h +++ b/fs/overlayfs/overlayfs.h @@ -408,6 +408,14 @@ static inline bool ovl_open_flags_need_copy_up(int flags) return ((OPEN_FMODE(flags) & FMODE_WRITE) || (flags & O_TRUNC)); } +static inline int ovl_do_getattr(const struct path *path, struct kstat *stat, + u32 request_mask, unsigned int flags) +{ + if (flags & AT_GETATTR_NOSEC) + return vfs_getattr_nosec(path, stat, request_mask, flags); + return vfs_getattr(path, stat, request_mask, flags); +} + /* util.c */ int ovl_get_write_access(struct dentry *dentry); void ovl_put_write_access(struct dentry *dentry); diff --git a/fs/stat.c b/fs/stat.c index 24bb0209e459..f721d26ec3f7 100644 --- a/fs/stat.c +++ b/fs/stat.c @@ -133,7 +133,8 @@ int vfs_getattr_nosec(const struct path *path, struct kstat *stat, idmap = mnt_idmap(path->mnt); if (inode->i_op->getattr) return inode->i_op->getattr(idmap, path, stat, - request_mask, query_flags); + request_mask, + query_flags | AT_GETATTR_NOSEC); generic_fillattr(idmap, request_mask, inode, stat); return 0; @@ -166,6 +167,9 @@ int vfs_getattr(const struct path *path, struct kstat *stat, { int retval; + if (WARN_ON_ONCE(query_flags & AT_GETATTR_NOSEC)) + return -EPERM; + retval = security_inode_getattr(path); if (retval) return retval; diff --git a/include/uapi/linux/fcntl.h b/include/uapi/linux/fcntl.h index 6c80f96049bd..282e90aeb163 100644 --- a/include/uapi/linux/fcntl.h +++ b/include/uapi/linux/fcntl.h @@ -116,5 +116,8 @@ #define AT_HANDLE_FID AT_REMOVEDIR /* file handle is needed to compare object identity and may not be usable to open_by_handle_at(2) */ +#if defined(__KERNEL__) +#define AT_GETATTR_NOSEC 0x80000000 +#endif #endif /* _UAPI_LINUX_FCNTL_H */ -- cgit v1.2.3 From fe2c34bab6d46469ad3095955dc37e984dc24e38 Mon Sep 17 00:00:00 2001 From: Omar Sandoval Date: Fri, 17 Nov 2023 13:38:46 -0800 Subject: iov_iter: fix copy_page_to_iter_nofault() The recent conversion to inline functions made two mistakes: 1. It tries to copy the full amount requested (bytes), not just what's available in the kmap'd page (n). 2. It's not applying the offset in the first page. Note that copy_page_to_iter_nofault() is only used by /proc/kcore. This was detected by drgn's test suite. Fixes: f1982740f5e7 ("iov_iter: Convert iterate*() to inline funcs") Signed-off-by: Omar Sandoval Link: https://lore.kernel.org/r/c1616e06b5248013cbbb1881bb4fef85a7a69ccb.1700257019.git.osandov@fb.com Acked-by: David Howells Signed-off-by: Christian Brauner --- lib/iov_iter.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/lib/iov_iter.c b/lib/iov_iter.c index de7d11cf4c63..8ff6824a1005 100644 --- a/lib/iov_iter.c +++ b/lib/iov_iter.c @@ -409,7 +409,7 @@ size_t copy_page_to_iter_nofault(struct page *page, unsigned offset, size_t byte void *kaddr = kmap_local_page(page); size_t n = min(bytes, (size_t)PAGE_SIZE - offset); - n = iterate_and_advance(i, bytes, kaddr, + n = iterate_and_advance(i, n, kaddr + offset, copy_to_user_iter_nofault, memcpy_to_iter); kunmap_local(kaddr); -- cgit v1.2.3 From 721d28f3dfb3e40c45ce45fbeeff47b72c230bc9 Mon Sep 17 00:00:00 2001 From: Kees Cook Date: Thu, 16 Nov 2023 11:13:40 -0800 Subject: parisc: Replace strlcpy() with strscpy() strlcpy() reads the entire source buffer first. This read may exceed the destination size limit. This is both inefficient and can lead to linear read overflows if a source string is not NUL-terminated[1]. Additionally, it returns the size of the source string, not the resulting size of the destination string. In an effort to remove strlcpy() completely[2], replace strlcpy() here with strscpy(). Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strlcpy [1] Link: https://github.com/KSPP/linux/issues/89 [2] Cc: "James E.J. Bottomley" Cc: Helge Deller Cc: Azeem Shaikh Cc: linux-parisc@vger.kernel.org Signed-off-by: Kees Cook Signed-off-by: Helge Deller --- arch/parisc/kernel/processor.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/parisc/kernel/processor.c b/arch/parisc/kernel/processor.c index 29e2750f86a4..e95a977ba5f3 100644 --- a/arch/parisc/kernel/processor.c +++ b/arch/parisc/kernel/processor.c @@ -383,7 +383,7 @@ show_cpuinfo (struct seq_file *m, void *v) char cpu_name[60], *p; /* strip PA path from CPU name to not confuse lscpu */ - strlcpy(cpu_name, per_cpu(cpu_data, 0).dev->name, sizeof(cpu_name)); + strscpy(cpu_name, per_cpu(cpu_data, 0).dev->name, sizeof(cpu_name)); p = strrchr(cpu_name, '['); if (p) *(--p) = 0; -- cgit v1.2.3 From 6ad6e15a9c46b8f0932cd99724f26f3db4db1cdf Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Fri, 17 Nov 2023 16:43:52 +0100 Subject: parisc/power: Fix power soft-off when running on qemu Firmware returns the physical address of the power switch, so need to use gsc_writel() instead of direct memory access. Fixes: d0c219472980 ("parisc/power: Add power soft-off when running on qemu") Signed-off-by: Helge Deller Cc: stable@vger.kernel.org # v6.0+ --- drivers/parisc/power.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/parisc/power.c b/drivers/parisc/power.c index 539d8920c202..bb0d92461b08 100644 --- a/drivers/parisc/power.c +++ b/drivers/parisc/power.c @@ -176,7 +176,7 @@ static struct notifier_block parisc_panic_block = { static int qemu_power_off(struct sys_off_data *data) { /* this turns the system off via SeaBIOS */ - *(int *)data->cb_data = 0; + gsc_writel(0, (unsigned long) data->cb_data); pdc_soft_power_button(1); return NOTIFY_DONE; } -- cgit v1.2.3 From 793838138c157d4c49f4fb744b170747e3dabf58 Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Sat, 18 Nov 2023 19:33:35 +0100 Subject: prctl: Disable prctl(PR_SET_MDWE) on parisc systemd-254 tries to use prctl(PR_SET_MDWE) for it's MemoryDenyWriteExecute functionality, but fails on parisc which still needs executable stacks in certain combinations of gcc/glibc/kernel. Disable prctl(PR_SET_MDWE) by returning -EINVAL for now on parisc, until userspace has catched up. Signed-off-by: Helge Deller Co-developed-by: Linus Torvalds Reported-by: Sam James Closes: https://github.com/systemd/systemd/issues/29775 Tested-by: Sam James Link: https://lore.kernel.org/all/875y2jro9a.fsf@gentoo.org/ Cc: # v6.3+ --- kernel/sys.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/kernel/sys.c b/kernel/sys.c index 420d9cb9cc8e..e219fcfa112d 100644 --- a/kernel/sys.c +++ b/kernel/sys.c @@ -2394,6 +2394,10 @@ static inline int prctl_set_mdwe(unsigned long bits, unsigned long arg3, if (bits & PR_MDWE_NO_INHERIT && !(bits & PR_MDWE_REFUSE_EXEC_GAIN)) return -EINVAL; + /* PARISC cannot allow mdwe as it needs writable stacks */ + if (IS_ENABLED(CONFIG_PARISC)) + return -EINVAL; + current_bits = get_current_mdwe(); if (current_bits && current_bits != bits) return -EPERM; /* Cannot unset the flags */ -- cgit v1.2.3 From b6f09b16558f31d93cdcda3cab90a2d309a7c823 Mon Sep 17 00:00:00 2001 From: Junxian Huang Date: Fri, 17 Nov 2023 16:06:57 +0800 Subject: MAINTAINERS: Add Chengchang Tang as Hisilicon RoCE maintainer Add Chengchang Tang as Hisilicon RoCE maintainer. Signed-off-by: Junxian Huang Link: https://lore.kernel.org/r/20231117080657.1844316-1-huangjunxian6@hisilicon.com Signed-off-by: Leon Romanovsky --- MAINTAINERS | 1 + 1 file changed, 1 insertion(+) diff --git a/MAINTAINERS b/MAINTAINERS index 97f51d5ec1cf..5e93f355c786 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -9628,6 +9628,7 @@ F: drivers/crypto/hisilicon/sgl.c F: include/linux/hisi_acc_qm.h HISILICON ROCE DRIVER +M: Chengchang Tang M: Junxian Huang L: linux-rdma@vger.kernel.org S: Maintained -- cgit v1.2.3 From 06fc41b09cfbc02977acd9189473593a37d82d9b Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Mon, 9 Oct 2023 00:33:15 +0200 Subject: drm/panel: simple: Fix Innolux G101ICE-L01 bus flags Add missing .bus_flags = DRM_BUS_FLAG_DE_HIGH to this panel description, ones which match both the datasheet and the panel display_timing flags . Fixes: 1e29b840af9f ("drm/panel: simple: Add Innolux G101ICE-L01 panel") Signed-off-by: Marek Vasut Reviewed-by: Neil Armstrong Link: https://patchwork.freedesktop.org/patch/msgid/20231008223315.279215-1-marex@denx.de --- drivers/gpu/drm/panel/panel-simple.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c index 6cd32b909087..086750f99d27 100644 --- a/drivers/gpu/drm/panel/panel-simple.c +++ b/drivers/gpu/drm/panel/panel-simple.c @@ -2402,6 +2402,7 @@ static const struct panel_desc innolux_g101ice_l01 = { .disable = 200, }, .bus_format = MEDIA_BUS_FMT_RGB888_1X7X4_SPWG, + .bus_flags = DRM_BUS_FLAG_DE_HIGH, .connector_type = DRM_MODE_CONNECTOR_LVDS, }; -- cgit v1.2.3 From 3f9a91b6c00e655d27bd785dcda1742dbdc31bda Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Mon, 9 Oct 2023 00:32:56 +0200 Subject: drm/panel: simple: Fix Innolux G101ICE-L01 timings The Innolux G101ICE-L01 datasheet [1] page 17 table 6.1 INPUT SIGNAL TIMING SPECIFICATIONS indicates that maximum vertical blanking time is 40 lines. Currently the driver uses 29 lines. Fix it, and since this panel is a DE panel, adjust the timings to make them less hostile to controllers which cannot do 1 px HSA/VSA, distribute the delays evenly between all three parts. [1] https://www.data-modul.com/sites/default/files/products/G101ICE-L01-C2-specification-12042389.pdf Fixes: 1e29b840af9f ("drm/panel: simple: Add Innolux G101ICE-L01 panel") Signed-off-by: Marek Vasut Reviewed-by: Neil Armstrong Link: https://patchwork.freedesktop.org/patch/msgid/20231008223256.279196-1-marex@denx.de --- drivers/gpu/drm/panel/panel-simple.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c index 086750f99d27..9367a4572dcf 100644 --- a/drivers/gpu/drm/panel/panel-simple.c +++ b/drivers/gpu/drm/panel/panel-simple.c @@ -2379,13 +2379,13 @@ static const struct panel_desc innolux_g070y2_t02 = { static const struct display_timing innolux_g101ice_l01_timing = { .pixelclock = { 60400000, 71100000, 74700000 }, .hactive = { 1280, 1280, 1280 }, - .hfront_porch = { 41, 80, 100 }, - .hback_porch = { 40, 79, 99 }, - .hsync_len = { 1, 1, 1 }, + .hfront_porch = { 30, 60, 70 }, + .hback_porch = { 30, 60, 70 }, + .hsync_len = { 22, 40, 60 }, .vactive = { 800, 800, 800 }, - .vfront_porch = { 5, 11, 14 }, - .vback_porch = { 4, 11, 14 }, - .vsync_len = { 1, 1, 1 }, + .vfront_porch = { 3, 8, 14 }, + .vback_porch = { 3, 8, 14 }, + .vsync_len = { 4, 7, 12 }, .flags = DISPLAY_FLAGS_DE_HIGH, }; -- cgit v1.2.3 From 8ba2c459668cfe2aaacc5ebcd35b4b9ef8643013 Mon Sep 17 00:00:00 2001 From: Jiawen Wu Date: Fri, 17 Nov 2023 18:11:08 +0800 Subject: net: wangxun: fix kernel panic due to null pointer When the device uses a custom subsystem vendor ID, the function wx_sw_init() returns before the memory of 'wx->mac_table' is allocated. The null pointer will causes the kernel panic. Fixes: 79625f45ca73 ("net: wangxun: Move MAC address handling to libwx") Signed-off-by: Jiawen Wu Reviewed-by: Simon Horman Signed-off-by: David S. Miller --- drivers/net/ethernet/wangxun/libwx/wx_hw.c | 8 +++++--- drivers/net/ethernet/wangxun/ngbe/ngbe_main.c | 4 +--- drivers/net/ethernet/wangxun/txgbe/txgbe_main.c | 4 +--- 3 files changed, 7 insertions(+), 9 deletions(-) diff --git a/drivers/net/ethernet/wangxun/libwx/wx_hw.c b/drivers/net/ethernet/wangxun/libwx/wx_hw.c index a3c5de9d547a..533e912af089 100644 --- a/drivers/net/ethernet/wangxun/libwx/wx_hw.c +++ b/drivers/net/ethernet/wangxun/libwx/wx_hw.c @@ -1769,10 +1769,12 @@ int wx_sw_init(struct wx *wx) wx->subsystem_device_id = pdev->subsystem_device; } else { err = wx_flash_read_dword(wx, 0xfffdc, &ssid); - if (!err) - wx->subsystem_device_id = swab16((u16)ssid); + if (err < 0) { + wx_err(wx, "read of internal subsystem device id failed\n"); + return err; + } - return err; + wx->subsystem_device_id = swab16((u16)ssid); } wx->mac_table = kcalloc(wx->mac.num_rar_entries, diff --git a/drivers/net/ethernet/wangxun/ngbe/ngbe_main.c b/drivers/net/ethernet/wangxun/ngbe/ngbe_main.c index 3d43f808c86b..8db804543e66 100644 --- a/drivers/net/ethernet/wangxun/ngbe/ngbe_main.c +++ b/drivers/net/ethernet/wangxun/ngbe/ngbe_main.c @@ -121,10 +121,8 @@ static int ngbe_sw_init(struct wx *wx) /* PCI config space info */ err = wx_sw_init(wx); - if (err < 0) { - wx_err(wx, "read of internal subsystem device id failed\n"); + if (err < 0) return err; - } /* mac type, phy type , oem type */ ngbe_init_type_code(wx); diff --git a/drivers/net/ethernet/wangxun/txgbe/txgbe_main.c b/drivers/net/ethernet/wangxun/txgbe/txgbe_main.c index 70f0b5c01dac..526250102db2 100644 --- a/drivers/net/ethernet/wangxun/txgbe/txgbe_main.c +++ b/drivers/net/ethernet/wangxun/txgbe/txgbe_main.c @@ -364,10 +364,8 @@ static int txgbe_sw_init(struct wx *wx) /* PCI config space info */ err = wx_sw_init(wx); - if (err < 0) { - wx_err(wx, "read of internal subsystem device id failed\n"); + if (err < 0) return err; - } txgbe_init_type_code(wx); -- cgit v1.2.3 From 93da8d75a66568ba4bb5b14ad2833acd7304cd02 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Fri, 17 Nov 2023 14:17:33 +0000 Subject: wireguard: use DEV_STATS_INC() wg_xmit() can be called concurrently, KCSAN reported [1] some device stats updates can be lost. Use DEV_STATS_INC() for this unlikely case. [1] BUG: KCSAN: data-race in wg_xmit / wg_xmit read-write to 0xffff888104239160 of 8 bytes by task 1375 on cpu 0: wg_xmit+0x60f/0x680 drivers/net/wireguard/device.c:231 __netdev_start_xmit include/linux/netdevice.h:4918 [inline] netdev_start_xmit include/linux/netdevice.h:4932 [inline] xmit_one net/core/dev.c:3543 [inline] dev_hard_start_xmit+0x11b/0x3f0 net/core/dev.c:3559 ... read-write to 0xffff888104239160 of 8 bytes by task 1378 on cpu 1: wg_xmit+0x60f/0x680 drivers/net/wireguard/device.c:231 __netdev_start_xmit include/linux/netdevice.h:4918 [inline] netdev_start_xmit include/linux/netdevice.h:4932 [inline] xmit_one net/core/dev.c:3543 [inline] dev_hard_start_xmit+0x11b/0x3f0 net/core/dev.c:3559 ... v2: also change wg_packet_consume_data_done() (Hangbin Liu) and wg_packet_purge_staged_packets() Fixes: e7096c131e51 ("net: WireGuard secure network tunnel") Reported-by: syzbot Signed-off-by: Eric Dumazet Cc: Jason A. Donenfeld Cc: Hangbin Liu Signed-off-by: Jason A. Donenfeld Reviewed-by: Hangbin Liu Signed-off-by: David S. Miller --- drivers/net/wireguard/device.c | 4 ++-- drivers/net/wireguard/receive.c | 12 ++++++------ drivers/net/wireguard/send.c | 3 ++- 3 files changed, 10 insertions(+), 9 deletions(-) diff --git a/drivers/net/wireguard/device.c b/drivers/net/wireguard/device.c index 258dcc103921..deb9636b0ecf 100644 --- a/drivers/net/wireguard/device.c +++ b/drivers/net/wireguard/device.c @@ -210,7 +210,7 @@ static netdev_tx_t wg_xmit(struct sk_buff *skb, struct net_device *dev) */ while (skb_queue_len(&peer->staged_packet_queue) > MAX_STAGED_PACKETS) { dev_kfree_skb(__skb_dequeue(&peer->staged_packet_queue)); - ++dev->stats.tx_dropped; + DEV_STATS_INC(dev, tx_dropped); } skb_queue_splice_tail(&packets, &peer->staged_packet_queue); spin_unlock_bh(&peer->staged_packet_queue.lock); @@ -228,7 +228,7 @@ err_icmp: else if (skb->protocol == htons(ETH_P_IPV6)) icmpv6_ndo_send(skb, ICMPV6_DEST_UNREACH, ICMPV6_ADDR_UNREACH, 0); err: - ++dev->stats.tx_errors; + DEV_STATS_INC(dev, tx_errors); kfree_skb(skb); return ret; } diff --git a/drivers/net/wireguard/receive.c b/drivers/net/wireguard/receive.c index 0b3f0c843550..a176653c8861 100644 --- a/drivers/net/wireguard/receive.c +++ b/drivers/net/wireguard/receive.c @@ -416,20 +416,20 @@ dishonest_packet_peer: net_dbg_skb_ratelimited("%s: Packet has unallowed src IP (%pISc) from peer %llu (%pISpfsc)\n", dev->name, skb, peer->internal_id, &peer->endpoint.addr); - ++dev->stats.rx_errors; - ++dev->stats.rx_frame_errors; + DEV_STATS_INC(dev, rx_errors); + DEV_STATS_INC(dev, rx_frame_errors); goto packet_processed; dishonest_packet_type: net_dbg_ratelimited("%s: Packet is neither ipv4 nor ipv6 from peer %llu (%pISpfsc)\n", dev->name, peer->internal_id, &peer->endpoint.addr); - ++dev->stats.rx_errors; - ++dev->stats.rx_frame_errors; + DEV_STATS_INC(dev, rx_errors); + DEV_STATS_INC(dev, rx_frame_errors); goto packet_processed; dishonest_packet_size: net_dbg_ratelimited("%s: Packet has incorrect size from peer %llu (%pISpfsc)\n", dev->name, peer->internal_id, &peer->endpoint.addr); - ++dev->stats.rx_errors; - ++dev->stats.rx_length_errors; + DEV_STATS_INC(dev, rx_errors); + DEV_STATS_INC(dev, rx_length_errors); goto packet_processed; packet_processed: dev_kfree_skb(skb); diff --git a/drivers/net/wireguard/send.c b/drivers/net/wireguard/send.c index 95c853b59e1d..0d48e0f4a1ba 100644 --- a/drivers/net/wireguard/send.c +++ b/drivers/net/wireguard/send.c @@ -333,7 +333,8 @@ err: void wg_packet_purge_staged_packets(struct wg_peer *peer) { spin_lock_bh(&peer->staged_packet_queue.lock); - peer->device->dev->stats.tx_dropped += peer->staged_packet_queue.qlen; + DEV_STATS_ADD(peer->device->dev, tx_dropped, + peer->staged_packet_queue.qlen); __skb_queue_purge(&peer->staged_packet_queue); spin_unlock_bh(&peer->staged_packet_queue.lock); } -- cgit v1.2.3 From 5f228d7c8a539714c1e9b7e7534f76bb7979f268 Mon Sep 17 00:00:00 2001 From: Suman Ghosh Date: Fri, 17 Nov 2023 16:10:18 +0530 Subject: octeontx2-pf: Fix memory leak during interface down During 'ifconfig down' one RSS memory was not getting freed. This patch fixes the same. Fixes: 81a4362016e7 ("octeontx2-pf: Add RSS multi group support") Signed-off-by: Suman Ghosh Reviewed-by: Simon Horman Signed-off-by: David S. Miller --- drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c index 91b99fd70361..ba95ac913274 100644 --- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c +++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c @@ -1934,6 +1934,8 @@ int otx2_stop(struct net_device *netdev) /* Clear RSS enable flag */ rss = &pf->hw.rss_info; rss->enable = false; + if (!netif_is_rxfh_configured(netdev)) + kfree(rss->rss_ctx[DEFAULT_RSS_CONTEXT_GROUP]); /* Cleanup Queue IRQ */ vec = pci_irq_vector(pf->pdev, -- cgit v1.2.3 From 938dbead34cd139c50c5d51cc58e18ef2f1c3d2c Mon Sep 17 00:00:00 2001 From: Jakub Kicinski Date: Sat, 18 Nov 2023 19:30:06 -0800 Subject: net: fill in MODULE_DESCRIPTION()s for SOCK_DIAG modules W=1 builds now warn if module is built without a MODULE_DESCRIPTION(). Add descriptions to all the sock diag modules in one fell swoop. Signed-off-by: Jakub Kicinski Signed-off-by: David S. Miller --- net/ipv4/inet_diag.c | 1 + net/ipv4/raw_diag.c | 1 + net/ipv4/tcp_diag.c | 1 + net/ipv4/udp_diag.c | 1 + net/mptcp/mptcp_diag.c | 1 + net/packet/diag.c | 1 + net/sctp/diag.c | 1 + net/smc/smc_diag.c | 1 + net/tipc/diag.c | 1 + net/unix/diag.c | 1 + net/vmw_vsock/diag.c | 1 + net/xdp/xsk_diag.c | 1 + 12 files changed, 12 insertions(+) diff --git a/net/ipv4/inet_diag.c b/net/ipv4/inet_diag.c index f01aee832aab..7d0e7aaa71e0 100644 --- a/net/ipv4/inet_diag.c +++ b/net/ipv4/inet_diag.c @@ -1481,5 +1481,6 @@ static void __exit inet_diag_exit(void) module_init(inet_diag_init); module_exit(inet_diag_exit); MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("INET/INET6: socket monitoring via SOCK_DIAG"); MODULE_ALIAS_NET_PF_PROTO_TYPE(PF_NETLINK, NETLINK_SOCK_DIAG, 2 /* AF_INET */); MODULE_ALIAS_NET_PF_PROTO_TYPE(PF_NETLINK, NETLINK_SOCK_DIAG, 10 /* AF_INET6 */); diff --git a/net/ipv4/raw_diag.c b/net/ipv4/raw_diag.c index 63a40e4b678f..fe2140c8375c 100644 --- a/net/ipv4/raw_diag.c +++ b/net/ipv4/raw_diag.c @@ -257,5 +257,6 @@ static void __exit raw_diag_exit(void) module_init(raw_diag_init); module_exit(raw_diag_exit); MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("RAW socket monitoring via SOCK_DIAG"); MODULE_ALIAS_NET_PF_PROTO_TYPE(PF_NETLINK, NETLINK_SOCK_DIAG, 2-255 /* AF_INET - IPPROTO_RAW */); MODULE_ALIAS_NET_PF_PROTO_TYPE(PF_NETLINK, NETLINK_SOCK_DIAG, 10-255 /* AF_INET6 - IPPROTO_RAW */); diff --git a/net/ipv4/tcp_diag.c b/net/ipv4/tcp_diag.c index 01b50fa79189..4cbe4b44425a 100644 --- a/net/ipv4/tcp_diag.c +++ b/net/ipv4/tcp_diag.c @@ -247,4 +247,5 @@ static void __exit tcp_diag_exit(void) module_init(tcp_diag_init); module_exit(tcp_diag_exit); MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("TCP socket monitoring via SOCK_DIAG"); MODULE_ALIAS_NET_PF_PROTO_TYPE(PF_NETLINK, NETLINK_SOCK_DIAG, 2-6 /* AF_INET - IPPROTO_TCP */); diff --git a/net/ipv4/udp_diag.c b/net/ipv4/udp_diag.c index de3f2d31f510..dc41a22ee80e 100644 --- a/net/ipv4/udp_diag.c +++ b/net/ipv4/udp_diag.c @@ -296,5 +296,6 @@ static void __exit udp_diag_exit(void) module_init(udp_diag_init); module_exit(udp_diag_exit); MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("UDP socket monitoring via SOCK_DIAG"); MODULE_ALIAS_NET_PF_PROTO_TYPE(PF_NETLINK, NETLINK_SOCK_DIAG, 2-17 /* AF_INET - IPPROTO_UDP */); MODULE_ALIAS_NET_PF_PROTO_TYPE(PF_NETLINK, NETLINK_SOCK_DIAG, 2-136 /* AF_INET - IPPROTO_UDPLITE */); diff --git a/net/mptcp/mptcp_diag.c b/net/mptcp/mptcp_diag.c index 8df1bdb647e2..5409c2ea3f57 100644 --- a/net/mptcp/mptcp_diag.c +++ b/net/mptcp/mptcp_diag.c @@ -245,4 +245,5 @@ static void __exit mptcp_diag_exit(void) module_init(mptcp_diag_init); module_exit(mptcp_diag_exit); MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("MPTCP socket monitoring via SOCK_DIAG"); MODULE_ALIAS_NET_PF_PROTO_TYPE(PF_NETLINK, NETLINK_SOCK_DIAG, 2-262 /* AF_INET - IPPROTO_MPTCP */); diff --git a/net/packet/diag.c b/net/packet/diag.c index f6b200cb3c06..9a7980e3309d 100644 --- a/net/packet/diag.c +++ b/net/packet/diag.c @@ -262,4 +262,5 @@ static void __exit packet_diag_exit(void) module_init(packet_diag_init); module_exit(packet_diag_exit); MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("PACKET socket monitoring via SOCK_DIAG"); MODULE_ALIAS_NET_PF_PROTO_TYPE(PF_NETLINK, NETLINK_SOCK_DIAG, 17 /* AF_PACKET */); diff --git a/net/sctp/diag.c b/net/sctp/diag.c index c3d6b92dd386..eb05131ff1dd 100644 --- a/net/sctp/diag.c +++ b/net/sctp/diag.c @@ -527,4 +527,5 @@ static void __exit sctp_diag_exit(void) module_init(sctp_diag_init); module_exit(sctp_diag_exit); MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("SCTP socket monitoring via SOCK_DIAG"); MODULE_ALIAS_NET_PF_PROTO_TYPE(PF_NETLINK, NETLINK_SOCK_DIAG, 2-132); diff --git a/net/smc/smc_diag.c b/net/smc/smc_diag.c index 7ff2152971a5..a584613aca12 100644 --- a/net/smc/smc_diag.c +++ b/net/smc/smc_diag.c @@ -268,5 +268,6 @@ static void __exit smc_diag_exit(void) module_init(smc_diag_init); module_exit(smc_diag_exit); MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("SMC socket monitoring via SOCK_DIAG"); MODULE_ALIAS_NET_PF_PROTO_TYPE(PF_NETLINK, NETLINK_SOCK_DIAG, 43 /* AF_SMC */); MODULE_ALIAS_GENL_FAMILY(SMCR_GENL_FAMILY_NAME); diff --git a/net/tipc/diag.c b/net/tipc/diag.c index 73137f4aeb68..18733451c9e0 100644 --- a/net/tipc/diag.c +++ b/net/tipc/diag.c @@ -113,4 +113,5 @@ module_init(tipc_diag_init); module_exit(tipc_diag_exit); MODULE_LICENSE("Dual BSD/GPL"); +MODULE_DESCRIPTION("TIPC socket monitoring via SOCK_DIAG"); MODULE_ALIAS_NET_PF_PROTO_TYPE(PF_NETLINK, NETLINK_SOCK_DIAG, AF_TIPC); diff --git a/net/unix/diag.c b/net/unix/diag.c index 616b55c5b890..bec09a3a1d44 100644 --- a/net/unix/diag.c +++ b/net/unix/diag.c @@ -339,4 +339,5 @@ static void __exit unix_diag_exit(void) module_init(unix_diag_init); module_exit(unix_diag_exit); MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("UNIX socket monitoring via SOCK_DIAG"); MODULE_ALIAS_NET_PF_PROTO_TYPE(PF_NETLINK, NETLINK_SOCK_DIAG, 1 /* AF_LOCAL */); diff --git a/net/vmw_vsock/diag.c b/net/vmw_vsock/diag.c index a2823b1c5e28..2e29994f92ff 100644 --- a/net/vmw_vsock/diag.c +++ b/net/vmw_vsock/diag.c @@ -174,5 +174,6 @@ static void __exit vsock_diag_exit(void) module_init(vsock_diag_init); module_exit(vsock_diag_exit); MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("VMware Virtual Sockets monitoring via SOCK_DIAG"); MODULE_ALIAS_NET_PF_PROTO_TYPE(PF_NETLINK, NETLINK_SOCK_DIAG, 40 /* AF_VSOCK */); diff --git a/net/xdp/xsk_diag.c b/net/xdp/xsk_diag.c index 22b36c8143cf..9f8955367275 100644 --- a/net/xdp/xsk_diag.c +++ b/net/xdp/xsk_diag.c @@ -211,4 +211,5 @@ static void __exit xsk_diag_exit(void) module_init(xsk_diag_init); module_exit(xsk_diag_exit); MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("XDP socket monitoring via SOCK_DIAG"); MODULE_ALIAS_NET_PF_PROTO_TYPE(PF_NETLINK, NETLINK_SOCK_DIAG, AF_XDP); -- cgit v1.2.3 From 98b1cc82c4affc16f5598d4fa14b1858671b2263 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sun, 19 Nov 2023 15:02:14 -0800 Subject: Linux 6.7-rc2 --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index ede0bd241056..724c79bebe72 100644 --- a/Makefile +++ b/Makefile @@ -2,7 +2,7 @@ VERSION = 6 PATCHLEVEL = 7 SUBLEVEL = 0 -EXTRAVERSION = -rc1 +EXTRAVERSION = -rc2 NAME = Hurr durr I'ma ninja sloth # *DOCUMENTATION* -- cgit v1.2.3 From a6925165ea82b7765269ddd8dcad57c731aa00de Mon Sep 17 00:00:00 2001 From: Chen Ni Date: Tue, 31 Oct 2023 04:00:07 +0000 Subject: ata: pata_isapnp: Add missing error check for devm_ioport_map() Add missing error return check for devm_ioport_map() and return the error if this function call fails. Fixes: 0d5ff566779f ("libata: convert to iomap") Signed-off-by: Chen Ni Reviewed-by: Sergey Shtylyov Signed-off-by: Damien Le Moal --- drivers/ata/pata_isapnp.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/ata/pata_isapnp.c b/drivers/ata/pata_isapnp.c index 25a63d043c8e..0f77e0424066 100644 --- a/drivers/ata/pata_isapnp.c +++ b/drivers/ata/pata_isapnp.c @@ -82,6 +82,9 @@ static int isapnp_init_one(struct pnp_dev *idev, const struct pnp_device_id *dev if (pnp_port_valid(idev, 1)) { ctl_addr = devm_ioport_map(&idev->dev, pnp_port_start(idev, 1), 1); + if (!ctl_addr) + return -ENOMEM; + ap->ioaddr.altstatus_addr = ctl_addr; ap->ioaddr.ctl_addr = ctl_addr; ap->ops = &isapnp_port_ops; -- cgit v1.2.3 From 45b478951b2ba5aea70b2850c49c1aa83aedd0d2 Mon Sep 17 00:00:00 2001 From: Song Liu Date: Fri, 17 Nov 2023 15:56:30 -0800 Subject: md: fix bi_status reporting in md_end_clone_io md_end_clone_io() may overwrite error status in orig_bio->bi_status with BLK_STS_OK. This could happen when orig_bio has BIO_CHAIN (split by md_submit_bio => bio_split_to_limits, for example). As a result, upper layer may miss error reported from md (or the device) and consider the failed IO was successful. Fix this by only update orig_bio->bi_status when current bio reports error and orig_bio is BLK_STS_OK. This is the same behavior as __bio_chain_endio(). Fixes: 10764815ff47 ("md: add io accounting for raid0 and raid5") Cc: stable@vger.kernel.org # v5.14+ Reported-by: Bhanu Victor DiCara <00bvd0+linux@gmail.com> Closes: https://lore.kernel.org/regressions/5727380.DvuYhMxLoT@bvd0/ Signed-off-by: Song Liu Tested-by: Xiao Ni Reviewed-by: Yu Kuai Acked-by: Guoqing Jiang --- drivers/md/md.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/md/md.c b/drivers/md/md.c index 4ee4593c874a..c94373d64f2c 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -8666,7 +8666,8 @@ static void md_end_clone_io(struct bio *bio) struct bio *orig_bio = md_io_clone->orig_bio; struct mddev *mddev = md_io_clone->mddev; - orig_bio->bi_status = bio->bi_status; + if (bio->bi_status && !orig_bio->bi_status) + orig_bio->bi_status = bio->bi_status; if (md_io_clone->start_time) bio_end_io_acct(orig_bio, md_io_clone->start_time); -- cgit v1.2.3 From 018903e1cec3421a6198589fabd30682eb277904 Mon Sep 17 00:00:00 2001 From: Imre Deak Date: Mon, 30 Oct 2023 01:13:08 +0200 Subject: drm/i915/dp_mst: Fix race between connector registration and setup MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit After drm_connector_init() is called the connector is visible to the rest of the kernel via the drm_mode_config::connector_list. Make sure that the DSC AUX device and capabilities are setup by that time. Another race condition is adding the connector to the connector list before drm_connector_helper_add() sets the connector helper functions. That's an unrelated issue, for which the fix is for a follow-up. One solution would be adding the connector to the connector list only during its registration in drm_connector_register(). Cc: Stanislav Lisovskiy Cc: Ville Syrjälä Fixes: 808b43fa7e56 ("drm/i915/dp_mst: Set connector DSC capabilities and decompression AUX") Reviewed-by: Stanislav Lisovskiy Signed-off-by: Imre Deak Link: https://patchwork.freedesktop.org/patch/msgid/20231030155843.2251023-2-imre.deak@intel.com (cherry picked from commit 560ea72c76eb6d0c59f77580414e64cc09f1093d) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/display/intel_dp_mst.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/drivers/gpu/drm/i915/display/intel_dp_mst.c b/drivers/gpu/drm/i915/display/intel_dp_mst.c index 7b4628f4f124..851b312bd844 100644 --- a/drivers/gpu/drm/i915/display/intel_dp_mst.c +++ b/drivers/gpu/drm/i915/display/intel_dp_mst.c @@ -1161,6 +1161,14 @@ static struct drm_connector *intel_dp_add_mst_connector(struct drm_dp_mst_topolo intel_connector->port = port; drm_dp_mst_get_port_malloc(port); + /* + * TODO: set the AUX for the actual MST port decompressing the stream. + * At the moment the driver only supports enabling this globally in the + * first downstream MST branch, via intel_dp's (root port) AUX. + */ + intel_connector->dp.dsc_decompression_aux = &intel_dp->aux; + intel_dp_mst_read_decompression_port_dsc_caps(intel_dp, intel_connector); + connector = &intel_connector->base; ret = drm_connector_init(dev, connector, &intel_dp_mst_connector_funcs, DRM_MODE_CONNECTOR_DisplayPort); @@ -1172,14 +1180,6 @@ static struct drm_connector *intel_dp_add_mst_connector(struct drm_dp_mst_topolo drm_connector_helper_add(connector, &intel_dp_mst_connector_helper_funcs); - /* - * TODO: set the AUX for the actual MST port decompressing the stream. - * At the moment the driver only supports enabling this globally in the - * first downstream MST branch, via intel_dp's (root port) AUX. - */ - intel_connector->dp.dsc_decompression_aux = &intel_dp->aux; - intel_dp_mst_read_decompression_port_dsc_caps(intel_dp, intel_connector); - for_each_pipe(dev_priv, pipe) { struct drm_encoder *enc = &intel_dp->mst_encoders[pipe]->base.base; -- cgit v1.2.3 From 0561794b6b642b84b879bf97061c4b4fa692839e Mon Sep 17 00:00:00 2001 From: Andrzej Hajda Date: Wed, 15 Nov 2023 11:54:03 +0100 Subject: drm/i915: do not clean GT table on error path The only task of intel_gt_release_all is to zero gt table. Calling it on error path prevents intel_gt_driver_late_release_all (called from i915_driver_late_release) to cleanup GTs, causing leakage. After i915_driver_late_release GT array is not used anymore so it does not need cleaning at all. Sample leak report: BUG i915_request (...): Objects remaining in i915_request on __kmem_cache_shutdown() ... Object 0xffff888113420040 @offset=64 Allocated in __i915_request_create+0x75/0x610 [i915] age=18339 cpu=1 pid=1454 kmem_cache_alloc+0x25b/0x270 __i915_request_create+0x75/0x610 [i915] i915_request_create+0x109/0x290 [i915] __engines_record_defaults+0xca/0x440 [i915] intel_gt_init+0x275/0x430 [i915] i915_gem_init+0x135/0x2c0 [i915] i915_driver_probe+0x8d1/0xdc0 [i915] v2: removed whole intel_gt_release_all Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/8489 Fixes: bec68cc9ea42 ("drm/i915: Prepare for multiple GTs") Signed-off-by: Andrzej Hajda Reviewed-by: Tvrtko Ursulin Reviewed-by: Nirmoy Das Reviewed-by: Andi Shyti Link: https://patchwork.freedesktop.org/patch/msgid/20231115-dont_clean_gt_on_error_path-v2-1-54250125470a@intel.com (cherry picked from commit e899505533852bf1da133f2f4c9a9655ff77f7e5) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/gt/intel_gt.c | 11 ----------- drivers/gpu/drm/i915/i915_driver.c | 4 +--- 2 files changed, 1 insertion(+), 14 deletions(-) diff --git a/drivers/gpu/drm/i915/gt/intel_gt.c b/drivers/gpu/drm/i915/gt/intel_gt.c index ed32bf5b1546..ba1186fc524f 100644 --- a/drivers/gpu/drm/i915/gt/intel_gt.c +++ b/drivers/gpu/drm/i915/gt/intel_gt.c @@ -982,8 +982,6 @@ int intel_gt_probe_all(struct drm_i915_private *i915) err: i915_probe_error(i915, "Failed to initialize %s! (%d)\n", gtdef->name, ret); - intel_gt_release_all(i915); - return ret; } @@ -1002,15 +1000,6 @@ int intel_gt_tiles_init(struct drm_i915_private *i915) return 0; } -void intel_gt_release_all(struct drm_i915_private *i915) -{ - struct intel_gt *gt; - unsigned int id; - - for_each_gt(gt, i915, id) - i915->gt[id] = NULL; -} - void intel_gt_info_print(const struct intel_gt_info *info, struct drm_printer *p) { diff --git a/drivers/gpu/drm/i915/i915_driver.c b/drivers/gpu/drm/i915/i915_driver.c index 8a0e2c745e1f..802de2c6decb 100644 --- a/drivers/gpu/drm/i915/i915_driver.c +++ b/drivers/gpu/drm/i915/i915_driver.c @@ -782,7 +782,7 @@ int i915_driver_probe(struct pci_dev *pdev, const struct pci_device_id *ent) ret = i915_driver_mmio_probe(i915); if (ret < 0) - goto out_tiles_cleanup; + goto out_runtime_pm_put; ret = i915_driver_hw_probe(i915); if (ret < 0) @@ -842,8 +842,6 @@ out_cleanup_hw: i915_ggtt_driver_late_release(i915); out_cleanup_mmio: i915_driver_mmio_release(i915); -out_tiles_cleanup: - intel_gt_release_all(i915); out_runtime_pm_put: enable_rpm_wakeref_asserts(&i915->runtime_pm); i915_driver_late_release(i915); -- cgit v1.2.3 From 7c9caa299335df94ad1c58f70a22f16a540eab60 Mon Sep 17 00:00:00 2001 From: Vasiliy Kovalev Date: Fri, 17 Nov 2023 20:09:23 +0300 Subject: ALSA: hda - Fix speaker and headset mic pin config for CHUWI CoreBook XPro This patch corrected the speaker and headset mic pin config to the more appropriate values. Signed-off-by: Vasiliy Kovalev Link: https://lore.kernel.org/r/20231117170923.106822-1-kovalev@altlinux.org Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 5618b1d9bfd1..079876b7b3e7 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -7249,6 +7249,7 @@ enum { ALC290_FIXUP_SUBWOOFER_HSJACK, ALC269_FIXUP_THINKPAD_ACPI, ALC269_FIXUP_DMIC_THINKPAD_ACPI, + ALC269VB_FIXUP_CHUWI_COREBOOK_XPRO, ALC255_FIXUP_ACER_MIC_NO_PRESENCE, ALC255_FIXUP_ASUS_MIC_NO_PRESENCE, ALC255_FIXUP_DELL1_MIC_NO_PRESENCE, @@ -7601,6 +7602,14 @@ static const struct hda_fixup alc269_fixups[] = { .type = HDA_FIXUP_FUNC, .v.func = alc269_fixup_pincfg_U7x7_headset_mic, }, + [ALC269VB_FIXUP_CHUWI_COREBOOK_XPRO] = { + .type = HDA_FIXUP_PINS, + .v.pins = (const struct hda_pintbl[]) { + { 0x18, 0x03a19020 }, /* headset mic */ + { 0x1b, 0x90170150 }, /* speaker */ + { } + }, + }, [ALC269_FIXUP_AMIC] = { .type = HDA_FIXUP_PINS, .v.pins = (const struct hda_pintbl[]) { @@ -10244,6 +10253,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x1d72, 0x1901, "RedmiBook 14", ALC256_FIXUP_ASUS_HEADSET_MIC), SND_PCI_QUIRK(0x1d72, 0x1945, "Redmi G", ALC256_FIXUP_ASUS_HEADSET_MIC), SND_PCI_QUIRK(0x1d72, 0x1947, "RedmiBook Air", ALC255_FIXUP_XIAOMI_HEADSET_MIC), + SND_PCI_QUIRK(0x2782, 0x0232, "CHUWI CoreBook XPro", ALC269VB_FIXUP_CHUWI_COREBOOK_XPRO), SND_PCI_QUIRK(0x8086, 0x2074, "Intel NUC 8", ALC233_FIXUP_INTEL_NUC8_DMIC), SND_PCI_QUIRK(0x8086, 0x2080, "Intel NUC 8 Rugged", ALC256_FIXUP_INTEL_NUC8_RUGGED), SND_PCI_QUIRK(0x8086, 0x2081, "Intel NUC 10", ALC256_FIXUP_INTEL_NUC10), -- cgit v1.2.3 From 37f67abe08557a79c3aabf684a49c6b99dbc259a Mon Sep 17 00:00:00 2001 From: Stefan Binding Date: Fri, 17 Nov 2023 16:36:08 +0000 Subject: ALSA: hda: cs35l41: Remove unnecessary boolean state variable firmware_running This state duplicates the running state inside cs_dsp, so is not necessary. Remove it, and use cs_dsp.running instead. This brings the CS35L41 HDA driver more inline with its ASoC version, allowing the same state to be used when calling library functions. Fixes: fa3efcc36aac ("ALSA: cs35l41: Use mbox command to enable speaker output for external boost") Signed-off-by: Stefan Binding Link: https://lore.kernel.org/r/20231117163609.823627-2-sbinding@opensource.cirrus.com Signed-off-by: Takashi Iwai --- sound/pci/hda/cs35l41_hda.c | 28 ++++++++++++---------------- 1 file changed, 12 insertions(+), 16 deletions(-) diff --git a/sound/pci/hda/cs35l41_hda.c b/sound/pci/hda/cs35l41_hda.c index b2db8091f0ed..b7d2aa18c566 100644 --- a/sound/pci/hda/cs35l41_hda.c +++ b/sound/pci/hda/cs35l41_hda.c @@ -504,7 +504,6 @@ static void cs35l41_shutdown_dsp(struct cs35l41_hda *cs35l41) cs_dsp_stop(dsp); cs_dsp_power_down(dsp); - cs35l41->firmware_running = false; dev_dbg(cs35l41->dev, "Unloaded Firmware\n"); } @@ -550,7 +549,7 @@ static void cs35l41_hda_play_start(struct device *dev) cs35l41->playback_started = true; - if (cs35l41->firmware_running) { + if (cs35l41->cs_dsp.running) { regmap_multi_reg_write(reg, cs35l41_hda_config_dsp, ARRAY_SIZE(cs35l41_hda_config_dsp)); regmap_update_bits(reg, CS35L41_PWR_CTRL2, @@ -580,7 +579,7 @@ static void cs35l41_mute(struct device *dev, bool mute) regmap_multi_reg_write(reg, cs35l41_hda_mute, ARRAY_SIZE(cs35l41_hda_mute)); } else { dev_dbg(dev, "Unmuting\n"); - if (cs35l41->firmware_running) { + if (cs35l41->cs_dsp.running) { regmap_multi_reg_write(reg, cs35l41_hda_unmute_dsp, ARRAY_SIZE(cs35l41_hda_unmute_dsp)); } else { @@ -599,7 +598,7 @@ static void cs35l41_hda_play_done(struct device *dev) dev_dbg(dev, "Play (Complete)\n"); cs35l41_global_enable(dev, reg, cs35l41->hw_cfg.bst_type, 1, - cs35l41->firmware_running); + cs35l41->cs_dsp.running); cs35l41_mute(dev, false); } @@ -612,7 +611,7 @@ static void cs35l41_hda_pause_start(struct device *dev) cs35l41_mute(dev, true); cs35l41_global_enable(dev, reg, cs35l41->hw_cfg.bst_type, 0, - cs35l41->firmware_running); + cs35l41->cs_dsp.running); } static void cs35l41_hda_pause_done(struct device *dev) @@ -625,7 +624,7 @@ static void cs35l41_hda_pause_done(struct device *dev) regmap_update_bits(reg, CS35L41_PWR_CTRL2, CS35L41_AMP_EN_MASK, 0 << CS35L41_AMP_EN_SHIFT); if (cs35l41->hw_cfg.bst_type == CS35L41_EXT_BOOST) regmap_write(reg, CS35L41_GPIO1_CTRL1, 0x00000001); - if (cs35l41->firmware_running) { + if (cs35l41->cs_dsp.running) { cs35l41_set_cspl_mbox_cmd(dev, reg, CSPL_MBOX_CMD_PAUSE); regmap_update_bits(reg, CS35L41_PWR_CTRL2, CS35L41_VMON_EN_MASK | CS35L41_IMON_EN_MASK, @@ -675,7 +674,7 @@ static void cs35l41_hda_playback_hook(struct device *dev, int action) break; case HDA_GEN_PCM_ACT_CLOSE: mutex_lock(&cs35l41->fw_mutex); - if (!cs35l41->firmware_running && cs35l41->request_fw_load && + if (!cs35l41->cs_dsp.running && cs35l41->request_fw_load && !cs35l41->fw_request_ongoing) { dev_info(dev, "Requesting Firmware Load after HDA_GEN_PCM_ACT_CLOSE\n"); cs35l41->fw_request_ongoing = true; @@ -761,10 +760,9 @@ static int cs35l41_verify_id(struct cs35l41_hda *cs35l41, unsigned int *regid, u static int cs35l41_ready_for_reset(struct cs35l41_hda *cs35l41) { mutex_lock(&cs35l41->fw_mutex); - if (cs35l41->firmware_running) { + if (cs35l41->cs_dsp.running) { cs35l41->cs_dsp.running = false; cs35l41->cs_dsp.booted = false; - cs35l41->firmware_running = false; } regcache_mark_dirty(cs35l41->regmap); mutex_unlock(&cs35l41->fw_mutex); @@ -925,7 +923,7 @@ static int cs35l41_runtime_suspend(struct device *dev) mutex_lock(&cs35l41->fw_mutex); - if (cs35l41->firmware_running) { + if (cs35l41->cs_dsp.running) { ret = cs35l41_enter_hibernate(cs35l41->dev, cs35l41->regmap, cs35l41->hw_cfg.bst_type); if (ret) @@ -960,7 +958,7 @@ static int cs35l41_runtime_resume(struct device *dev) regcache_cache_only(cs35l41->regmap, false); - if (cs35l41->firmware_running) { + if (cs35l41->cs_dsp.running) { ret = cs35l41_exit_hibernate(cs35l41->dev, cs35l41->regmap); if (ret) { dev_warn(cs35l41->dev, "Unable to exit Hibernate."); @@ -1052,8 +1050,6 @@ static int cs35l41_smart_amp(struct cs35l41_hda *cs35l41) goto clean_dsp; } - cs35l41->firmware_running = true; - return 0; clean_dsp: @@ -1063,10 +1059,10 @@ clean_dsp: static void cs35l41_load_firmware(struct cs35l41_hda *cs35l41, bool load) { - if (cs35l41->firmware_running && !load) { + if (cs35l41->cs_dsp.running && !load) { dev_dbg(cs35l41->dev, "Unloading Firmware\n"); cs35l41_shutdown_dsp(cs35l41); - } else if (!cs35l41->firmware_running && load) { + } else if (!cs35l41->cs_dsp.running && load) { dev_dbg(cs35l41->dev, "Loading Firmware\n"); cs35l41_smart_amp(cs35l41); } else { @@ -1346,7 +1342,7 @@ static int cs35l41_hda_bind(struct device *dev, struct device *master, void *mas cs35l41->acpi_subsystem_id, cs35l41->hw_cfg.bst_type, cs35l41->hw_cfg.gpio1.func == CS35l41_VSPK_SWITCH, cs35l41->hw_cfg.spk_pos ? 'R' : 'L', - cs35l41->firmware_running, cs35l41->speaker_id); + cs35l41->cs_dsp.running, cs35l41->speaker_id); return ret; } -- cgit v1.2.3 From d04ce4113cb4e5c2deddcb161db42a25917f285f Mon Sep 17 00:00:00 2001 From: Stefan Binding Date: Fri, 17 Nov 2023 16:36:09 +0000 Subject: ALSA: cs35l41: Fix for old systems which do not support command Some older laptops using cs35l41 use firmware which does not support the CSPL_MBOX_CMD_SPK_OUT_ENABLE command. Firmware versions v0.28.0 and older do not support this command. Fixes: fa3efcc36aac ("ALSA: cs35l41: Use mbox command to enable speaker output for external boost") Signed-off-by: Stefan Binding Link: https://lore.kernel.org/r/20231117163609.823627-3-sbinding@opensource.cirrus.com Signed-off-by: Takashi Iwai --- include/sound/cs35l41.h | 2 +- sound/pci/hda/cs35l41_hda.c | 4 ++-- sound/soc/codecs/cs35l41-lib.c | 6 ++++-- sound/soc/codecs/cs35l41.c | 4 ++-- 4 files changed, 9 insertions(+), 7 deletions(-) diff --git a/include/sound/cs35l41.h b/include/sound/cs35l41.h index 043f8ac65dbf..68e053fe7340 100644 --- a/include/sound/cs35l41.h +++ b/include/sound/cs35l41.h @@ -906,6 +906,6 @@ int cs35l41_init_boost(struct device *dev, struct regmap *regmap, bool cs35l41_safe_reset(struct regmap *regmap, enum cs35l41_boost_type b_type); int cs35l41_mdsync_up(struct regmap *regmap); int cs35l41_global_enable(struct device *dev, struct regmap *regmap, enum cs35l41_boost_type b_type, - int enable, bool firmware_running); + int enable, struct cs_dsp *dsp); #endif /* __CS35L41_H */ diff --git a/sound/pci/hda/cs35l41_hda.c b/sound/pci/hda/cs35l41_hda.c index b7d2aa18c566..cbd7d8badf91 100644 --- a/sound/pci/hda/cs35l41_hda.c +++ b/sound/pci/hda/cs35l41_hda.c @@ -598,7 +598,7 @@ static void cs35l41_hda_play_done(struct device *dev) dev_dbg(dev, "Play (Complete)\n"); cs35l41_global_enable(dev, reg, cs35l41->hw_cfg.bst_type, 1, - cs35l41->cs_dsp.running); + &cs35l41->cs_dsp); cs35l41_mute(dev, false); } @@ -611,7 +611,7 @@ static void cs35l41_hda_pause_start(struct device *dev) cs35l41_mute(dev, true); cs35l41_global_enable(dev, reg, cs35l41->hw_cfg.bst_type, 0, - cs35l41->cs_dsp.running); + &cs35l41->cs_dsp); } static void cs35l41_hda_pause_done(struct device *dev) diff --git a/sound/soc/codecs/cs35l41-lib.c b/sound/soc/codecs/cs35l41-lib.c index 4569e4f7cf7e..e9993a39f7d0 100644 --- a/sound/soc/codecs/cs35l41-lib.c +++ b/sound/soc/codecs/cs35l41-lib.c @@ -16,6 +16,8 @@ #include +#define CS35L41_FIRMWARE_OLD_VERSION 0x001C00 /* v0.28.0 */ + static const struct reg_default cs35l41_reg[] = { { CS35L41_PWR_CTRL1, 0x00000000 }, { CS35L41_PWR_CTRL2, 0x00000000 }, @@ -1214,7 +1216,7 @@ EXPORT_SYMBOL_GPL(cs35l41_safe_reset); * the PLL Lock interrupt, in the IRQ handler. */ int cs35l41_global_enable(struct device *dev, struct regmap *regmap, enum cs35l41_boost_type b_type, - int enable, bool firmware_running) + int enable, struct cs_dsp *dsp) { int ret; unsigned int gpio1_func, pad_control, pwr_ctrl1, pwr_ctrl3, int_status, pup_pdn_mask; @@ -1309,7 +1311,7 @@ int cs35l41_global_enable(struct device *dev, struct regmap *regmap, enum cs35l4 } regmap_write(regmap, CS35L41_IRQ1_STATUS1, CS35L41_PUP_DONE_MASK); - if (firmware_running) + if (dsp->running && dsp->fw_id_version > CS35L41_FIRMWARE_OLD_VERSION) ret = cs35l41_set_cspl_mbox_cmd(dev, regmap, CSPL_MBOX_CMD_SPK_OUT_ENABLE); else diff --git a/sound/soc/codecs/cs35l41.c b/sound/soc/codecs/cs35l41.c index d0e9128ac6d0..dfb4ce53491b 100644 --- a/sound/soc/codecs/cs35l41.c +++ b/sound/soc/codecs/cs35l41.c @@ -519,11 +519,11 @@ static int cs35l41_main_amp_event(struct snd_soc_dapm_widget *w, ARRAY_SIZE(cs35l41_pup_patch)); ret = cs35l41_global_enable(cs35l41->dev, cs35l41->regmap, cs35l41->hw_cfg.bst_type, - 1, cs35l41->dsp.cs_dsp.running); + 1, &cs35l41->dsp.cs_dsp); break; case SND_SOC_DAPM_POST_PMD: ret = cs35l41_global_enable(cs35l41->dev, cs35l41->regmap, cs35l41->hw_cfg.bst_type, - 0, cs35l41->dsp.cs_dsp.running); + 0, &cs35l41->dsp.cs_dsp); regmap_multi_reg_write_bypassed(cs35l41->regmap, cs35l41_pdn_patch, -- cgit v1.2.3 From 14e8442e0789598514f3c9de014950de9feda7a4 Mon Sep 17 00:00:00 2001 From: Shengjiu Wang Date: Mon, 20 Nov 2023 18:05:35 +0800 Subject: ASoC: fsl_sai: Fix no frame sync clock issue on i.MX8MP On i.MX8MP, when the TERE and FSD_MSTR enabled before configuring the word width, there will be no frame sync clock issue, because old word width impact the generation of frame sync. TERE enabled earlier only for i.MX8MP case for the hardware limitation, So need to disable FSD_MSTR before configuring word width, then enable FSD_MSTR bit for this specific case. Fixes: 3e4a82612998 ("ASoC: fsl_sai: MCLK bind with TX/RX enable bit") Signed-off-by: Shengjiu Wang Link: https://lore.kernel.org/r/1700474735-3863-1-git-send-email-shengjiu.wang@nxp.com Signed-off-by: Mark Brown --- sound/soc/fsl/fsl_sai.c | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) diff --git a/sound/soc/fsl/fsl_sai.c b/sound/soc/fsl/fsl_sai.c index 79e7c6b98a75..32bbe5056a63 100644 --- a/sound/soc/fsl/fsl_sai.c +++ b/sound/soc/fsl/fsl_sai.c @@ -673,6 +673,20 @@ static int fsl_sai_hw_params(struct snd_pcm_substream *substream, FSL_SAI_CR3_TRCE_MASK, FSL_SAI_CR3_TRCE((dl_cfg[dl_cfg_idx].mask[tx] & trce_mask))); + /* + * When the TERE and FSD_MSTR enabled before configuring the word width + * There will be no frame sync clock issue, because word width impact + * the generation of frame sync clock. + * + * TERE enabled earlier only for i.MX8MP case for the hardware limitation, + * We need to disable FSD_MSTR before configuring word width, then enable + * FSD_MSTR bit for this specific case. + */ + if (sai->soc_data->mclk_with_tere && sai->mclk_direction_output && + !sai->is_consumer_mode) + regmap_update_bits(sai->regmap, FSL_SAI_xCR4(tx, ofs), + FSL_SAI_CR4_FSD_MSTR, 0); + regmap_update_bits(sai->regmap, FSL_SAI_xCR4(tx, ofs), FSL_SAI_CR4_SYWD_MASK | FSL_SAI_CR4_FRSZ_MASK | FSL_SAI_CR4_CHMOD_MASK, @@ -680,6 +694,13 @@ static int fsl_sai_hw_params(struct snd_pcm_substream *substream, regmap_update_bits(sai->regmap, FSL_SAI_xCR5(tx, ofs), FSL_SAI_CR5_WNW_MASK | FSL_SAI_CR5_W0W_MASK | FSL_SAI_CR5_FBT_MASK, val_cr5); + + /* Enable FSD_MSTR after configuring word width */ + if (sai->soc_data->mclk_with_tere && sai->mclk_direction_output && + !sai->is_consumer_mode) + regmap_update_bits(sai->regmap, FSL_SAI_xCR4(tx, ofs), + FSL_SAI_CR4_FSD_MSTR, FSL_SAI_CR4_FSD_MSTR); + regmap_write(sai->regmap, FSL_SAI_xMR(tx), ~0UL - ((1 << min(channels, slots)) - 1)); -- cgit v1.2.3 From 66917f85db6002ed09cd24186258892fcfca64b6 Mon Sep 17 00:00:00 2001 From: Ian Kent Date: Mon, 20 Nov 2023 06:53:19 +0800 Subject: autofs: add: new_inode check in autofs_fill_super() Add missing NULL check of root_inode in autofs_fill_super(). While we are at it simplify the logic by taking advantage of the VFS cleanup procedures and get rid of the goto error handling, as suggested by Al Viro. Signed-off-by: Ian Kent Link: https://lore.kernel.org/r/20231119225319.331156-1-raven@themaw.net Reviewed-by: Bill O'Donnell Cc: Al Viro Cc: Christian Brauner Cc: Bill O'Donnell Reported-by: Signed-off-by: Christian Brauner --- fs/autofs/inode.c | 56 +++++++++++++++++++++---------------------------------- 1 file changed, 21 insertions(+), 35 deletions(-) diff --git a/fs/autofs/inode.c b/fs/autofs/inode.c index a5083d447a62..1f5db6863663 100644 --- a/fs/autofs/inode.c +++ b/fs/autofs/inode.c @@ -309,9 +309,7 @@ static int autofs_fill_super(struct super_block *s, struct fs_context *fc) struct autofs_fs_context *ctx = fc->fs_private; struct autofs_sb_info *sbi = s->s_fs_info; struct inode *root_inode; - struct dentry *root; struct autofs_info *ino; - int ret = -ENOMEM; pr_debug("starting up, sbi = %p\n", sbi); @@ -328,56 +326,44 @@ static int autofs_fill_super(struct super_block *s, struct fs_context *fc) */ ino = autofs_new_ino(sbi); if (!ino) - goto fail; + return -ENOMEM; root_inode = autofs_get_inode(s, S_IFDIR | 0755); + if (!root_inode) + return -ENOMEM; + root_inode->i_uid = ctx->uid; root_inode->i_gid = ctx->gid; + root_inode->i_fop = &autofs_root_operations; + root_inode->i_op = &autofs_dir_inode_operations; - root = d_make_root(root_inode); - if (!root) - goto fail_ino; - - root->d_fsdata = ino; + s->s_root = d_make_root(root_inode); + if (unlikely(!s->s_root)) { + autofs_free_ino(ino); + return -ENOMEM; + } + s->s_root->d_fsdata = ino; if (ctx->pgrp_set) { sbi->oz_pgrp = find_get_pid(ctx->pgrp); - if (!sbi->oz_pgrp) { - ret = invalf(fc, "Could not find process group %d", - ctx->pgrp); - goto fail_dput; - } - } else { + if (!sbi->oz_pgrp) + return invalf(fc, "Could not find process group %d", + ctx->pgrp); + } else sbi->oz_pgrp = get_task_pid(current, PIDTYPE_PGID); - } if (autofs_type_trigger(sbi->type)) - __managed_dentry_set_managed(root); - - root_inode->i_fop = &autofs_root_operations; - root_inode->i_op = &autofs_dir_inode_operations; + /* s->s_root won't be contended so there's little to + * be gained by not taking the d_lock when setting + * d_flags, even when a lot mounts are being done. + */ + managed_dentry_set_managed(s->s_root); pr_debug("pipe fd = %d, pgrp = %u\n", sbi->pipefd, pid_nr(sbi->oz_pgrp)); sbi->flags &= ~AUTOFS_SBI_CATATONIC; - - /* - * Success! Install the root dentry now to indicate completion. - */ - s->s_root = root; return 0; - - /* - * Failure ... clean up. - */ -fail_dput: - dput(root); - goto fail; -fail_ino: - autofs_free_ino(ino); -fail: - return ret; } /* -- cgit v1.2.3 From 762321dab9a72760bf9aec48362f932717c9424d Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Wed, 25 Oct 2023 16:10:17 +0200 Subject: filemap: add a per-mapping stable writes flag folio_wait_stable waits for writeback to finish before modifying the contents of a folio again, e.g. to support check summing of the data in the block integrity code. Currently this behavior is controlled by the SB_I_STABLE_WRITES flag on the super_block, which means it is uniform for the entire file system. This is wrong for the block device pseudofs which is shared by all block devices, or file systems that can use multiple devices like XFS witht the RT subvolume or btrfs (although btrfs currently reimplements folio_wait_stable anyway). Add a per-address_space AS_STABLE_WRITES flag to control the behavior in a more fine grained way. The existing SB_I_STABLE_WRITES is kept to initialize AS_STABLE_WRITES to the existing default which covers most cases. Signed-off-by: Christoph Hellwig Link: https://lore.kernel.org/r/20231025141020.192413-2-hch@lst.de Tested-by: Ilya Dryomov Reviewed-by: Matthew Wilcox (Oracle) Reviewed-by: Darrick J. Wong Signed-off-by: Christian Brauner --- fs/inode.c | 2 ++ include/linux/pagemap.h | 17 +++++++++++++++++ mm/page-writeback.c | 2 +- 3 files changed, 20 insertions(+), 1 deletion(-) diff --git a/fs/inode.c b/fs/inode.c index edcd8a61975f..f238d987dec9 100644 --- a/fs/inode.c +++ b/fs/inode.c @@ -215,6 +215,8 @@ int inode_init_always(struct super_block *sb, struct inode *inode) lockdep_set_class_and_name(&mapping->invalidate_lock, &sb->s_type->invalidate_lock_key, "mapping.invalidate_lock"); + if (sb->s_iflags & SB_I_STABLE_WRITES) + mapping_set_stable_writes(mapping); inode->i_private = NULL; inode->i_mapping = mapping; INIT_HLIST_HEAD(&inode->i_dentry); /* buggered by rcu freeing */ diff --git a/include/linux/pagemap.h b/include/linux/pagemap.h index bcc1ea44b4e8..06142ff7f9ce 100644 --- a/include/linux/pagemap.h +++ b/include/linux/pagemap.h @@ -204,6 +204,8 @@ enum mapping_flags { AS_NO_WRITEBACK_TAGS = 5, AS_LARGE_FOLIO_SUPPORT = 6, AS_RELEASE_ALWAYS, /* Call ->release_folio(), even if no private data */ + AS_STABLE_WRITES, /* must wait for writeback before modifying + folio contents */ }; /** @@ -289,6 +291,21 @@ static inline void mapping_clear_release_always(struct address_space *mapping) clear_bit(AS_RELEASE_ALWAYS, &mapping->flags); } +static inline bool mapping_stable_writes(const struct address_space *mapping) +{ + return test_bit(AS_STABLE_WRITES, &mapping->flags); +} + +static inline void mapping_set_stable_writes(struct address_space *mapping) +{ + set_bit(AS_STABLE_WRITES, &mapping->flags); +} + +static inline void mapping_clear_stable_writes(struct address_space *mapping) +{ + clear_bit(AS_STABLE_WRITES, &mapping->flags); +} + static inline gfp_t mapping_gfp_mask(struct address_space * mapping) { return mapping->gfp_mask; diff --git a/mm/page-writeback.c b/mm/page-writeback.c index 46f2f5d3d183..ee2fd6a6af40 100644 --- a/mm/page-writeback.c +++ b/mm/page-writeback.c @@ -3107,7 +3107,7 @@ EXPORT_SYMBOL_GPL(folio_wait_writeback_killable); */ void folio_wait_stable(struct folio *folio) { - if (folio_inode(folio)->i_sb->s_iflags & SB_I_STABLE_WRITES) + if (mapping_stable_writes(folio_mapping(folio))) folio_wait_writeback(folio); } EXPORT_SYMBOL_GPL(folio_wait_stable); -- cgit v1.2.3 From 1898efcdbed32bb1c67269c985a50bab0dbc9493 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Wed, 25 Oct 2023 16:10:18 +0200 Subject: block: update the stable_writes flag in bdev_add Propagate the per-queue stable_write flags into each bdev inode in bdev_add. This makes sure devices that require stable writes have it set for I/O on the block device node as well. Note that this doesn't cover the case of a flag changing on a live device yet. We should handle that as well, but I plan to cover it as part of a more general rework of how changing runtime paramters on block devices works. Fixes: 1cb039f3dc16 ("bdi: replace BDI_CAP_STABLE_WRITES with a queue and a sb flag") Reported-by: Ilya Dryomov Signed-off-by: Christoph Hellwig Link: https://lore.kernel.org/r/20231025141020.192413-3-hch@lst.de Tested-by: Ilya Dryomov Reviewed-by: Darrick J. Wong Signed-off-by: Christian Brauner --- block/bdev.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/block/bdev.c b/block/bdev.c index e4cfb7adb645..750aec178b6a 100644 --- a/block/bdev.c +++ b/block/bdev.c @@ -425,6 +425,8 @@ void bdev_set_nr_sectors(struct block_device *bdev, sector_t sectors) void bdev_add(struct block_device *bdev, dev_t dev) { + if (bdev_stable_writes(bdev)) + mapping_set_stable_writes(bdev->bd_inode->i_mapping); bdev->bd_dev = dev; bdev->bd_inode->i_rdev = dev; bdev->bd_inode->i_ino = dev; -- cgit v1.2.3 From c421df0b19430417a04f68919fc3d1943d20ac04 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Wed, 25 Oct 2023 16:10:19 +0200 Subject: xfs: clean up FS_XFLAG_REALTIME handling in xfs_ioctl_setattr_xflags Introduce a local boolean variable if FS_XFLAG_REALTIME to make the checks for it more obvious, and de-densify a few of the conditionals using it to make them more readable while at it. Signed-off-by: Christoph Hellwig Link: https://lore.kernel.org/r/20231025141020.192413-4-hch@lst.de Reviewed-by: Darrick J. Wong Signed-off-by: Christian Brauner --- fs/xfs/xfs_ioctl.c | 22 ++++++++++++---------- 1 file changed, 12 insertions(+), 10 deletions(-) diff --git a/fs/xfs/xfs_ioctl.c b/fs/xfs/xfs_ioctl.c index a82470e027f7..022dc2dc78d2 100644 --- a/fs/xfs/xfs_ioctl.c +++ b/fs/xfs/xfs_ioctl.c @@ -1121,23 +1121,25 @@ xfs_ioctl_setattr_xflags( struct fileattr *fa) { struct xfs_mount *mp = ip->i_mount; + bool rtflag = (fa->fsx_xflags & FS_XFLAG_REALTIME); uint64_t i_flags2; - /* Can't change realtime flag if any extents are allocated. */ - if ((ip->i_df.if_nextents || ip->i_delayed_blks) && - XFS_IS_REALTIME_INODE(ip) != (fa->fsx_xflags & FS_XFLAG_REALTIME)) - return -EINVAL; + if (rtflag != XFS_IS_REALTIME_INODE(ip)) { + /* Can't change realtime flag if any extents are allocated. */ + if (ip->i_df.if_nextents || ip->i_delayed_blks) + return -EINVAL; + } - /* If realtime flag is set then must have realtime device */ - if (fa->fsx_xflags & FS_XFLAG_REALTIME) { + if (rtflag) { + /* If realtime flag is set then must have realtime device */ if (mp->m_sb.sb_rblocks == 0 || mp->m_sb.sb_rextsize == 0 || xfs_extlen_to_rtxmod(mp, ip->i_extsize)) return -EINVAL; - } - /* Clear reflink if we are actually able to set the rt flag. */ - if ((fa->fsx_xflags & FS_XFLAG_REALTIME) && xfs_is_reflink_inode(ip)) - ip->i_diflags2 &= ~XFS_DIFLAG2_REFLINK; + /* Clear reflink if we are actually able to set the rt flag. */ + if (xfs_is_reflink_inode(ip)) + ip->i_diflags2 &= ~XFS_DIFLAG2_REFLINK; + } /* diflags2 only valid for v3 inodes. */ i_flags2 = xfs_flags2diflags2(ip, fa->fsx_xflags); -- cgit v1.2.3 From 9c04138414c00ae61421f36ada002712c4bac94a Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Wed, 25 Oct 2023 16:10:20 +0200 Subject: xfs: respect the stable writes flag on the RT device Update the per-folio stable writes flag dependening on which device an inode resides on. Signed-off-by: Christoph Hellwig Link: https://lore.kernel.org/r/20231025141020.192413-5-hch@lst.de Reviewed-by: Darrick J. Wong Signed-off-by: Christian Brauner --- fs/xfs/xfs_inode.h | 8 ++++++++ fs/xfs/xfs_ioctl.c | 8 ++++++++ fs/xfs/xfs_iops.c | 7 +++++++ 3 files changed, 23 insertions(+) diff --git a/fs/xfs/xfs_inode.h b/fs/xfs/xfs_inode.h index 3dc47937da5d..3beb470f1892 100644 --- a/fs/xfs/xfs_inode.h +++ b/fs/xfs/xfs_inode.h @@ -569,6 +569,14 @@ extern void xfs_setup_inode(struct xfs_inode *ip); extern void xfs_setup_iops(struct xfs_inode *ip); extern void xfs_diflags_to_iflags(struct xfs_inode *ip, bool init); +static inline void xfs_update_stable_writes(struct xfs_inode *ip) +{ + if (bdev_stable_writes(xfs_inode_buftarg(ip)->bt_bdev)) + mapping_set_stable_writes(VFS_I(ip)->i_mapping); + else + mapping_clear_stable_writes(VFS_I(ip)->i_mapping); +} + /* * When setting up a newly allocated inode, we need to call * xfs_finish_inode_setup() once the inode is fully instantiated at diff --git a/fs/xfs/xfs_ioctl.c b/fs/xfs/xfs_ioctl.c index 022dc2dc78d2..6c3919687ea6 100644 --- a/fs/xfs/xfs_ioctl.c +++ b/fs/xfs/xfs_ioctl.c @@ -1150,6 +1150,14 @@ xfs_ioctl_setattr_xflags( ip->i_diflags2 = i_flags2; xfs_diflags_to_iflags(ip, false); + + /* + * Make the stable writes flag match that of the device the inode + * resides on when flipping the RT flag. + */ + if (rtflag != XFS_IS_REALTIME_INODE(ip) && S_ISREG(VFS_I(ip)->i_mode)) + xfs_update_stable_writes(ip); + xfs_trans_ichgtime(tp, ip, XFS_ICHGTIME_CHG); xfs_trans_log_inode(tp, ip, XFS_ILOG_CORE); XFS_STATS_INC(mp, xs_ig_attrchg); diff --git a/fs/xfs/xfs_iops.c b/fs/xfs/xfs_iops.c index fdfda4fba12b..a0d77f5f512e 100644 --- a/fs/xfs/xfs_iops.c +++ b/fs/xfs/xfs_iops.c @@ -1298,6 +1298,13 @@ xfs_setup_inode( gfp_mask = mapping_gfp_mask(inode->i_mapping); mapping_set_gfp_mask(inode->i_mapping, (gfp_mask & ~(__GFP_FS))); + /* + * For real-time inodes update the stable write flags to that of the RT + * device instead of the data device. + */ + if (S_ISREG(inode->i_mode) && XFS_IS_REALTIME_INODE(ip)) + xfs_update_stable_writes(ip); + /* * If there is no attribute fork no ACL can exist on this inode, * and it can't have any file capabilities attached to it either. -- cgit v1.2.3 From 796432efab1e372d404e7a71cc6891a53f105051 Mon Sep 17 00:00:00 2001 From: Chuck Lever Date: Sun, 19 Nov 2023 18:56:17 -0500 Subject: libfs: getdents() should return 0 after reaching EOD The new directory offset helpers don't conform with the convention of getdents() returning no more entries once a directory file descriptor has reached the current end-of-directory. To address this, copy the logic from dcache_readdir() to mark the open directory file descriptor once EOD has been reached. Seeking resets the mark. Reported-by: Tavian Barnes Closes: https://lore.kernel.org/linux-fsdevel/20231113180616.2831430-1-tavianator@tavianator.com/ Fixes: 6faddda69f62 ("libfs: Add directory operations for stable offsets") Signed-off-by: Chuck Lever Link: https://lore.kernel.org/r/170043792492.4628.15646203084646716134.stgit@bazille.1015granger.net Signed-off-by: Christian Brauner --- fs/libfs.c | 14 +++++++++++--- 1 file changed, 11 insertions(+), 3 deletions(-) diff --git a/fs/libfs.c b/fs/libfs.c index e9440d55073c..c2aa6fd4795c 100644 --- a/fs/libfs.c +++ b/fs/libfs.c @@ -399,6 +399,8 @@ static loff_t offset_dir_llseek(struct file *file, loff_t offset, int whence) return -EINVAL; } + /* In this case, ->private_data is protected by f_pos_lock */ + file->private_data = NULL; return vfs_setpos(file, offset, U32_MAX); } @@ -428,7 +430,7 @@ static bool offset_dir_emit(struct dir_context *ctx, struct dentry *dentry) inode->i_ino, fs_umode_to_dtype(inode->i_mode)); } -static void offset_iterate_dir(struct inode *inode, struct dir_context *ctx) +static void *offset_iterate_dir(struct inode *inode, struct dir_context *ctx) { struct offset_ctx *so_ctx = inode->i_op->get_offset_ctx(inode); XA_STATE(xas, &so_ctx->xa, ctx->pos); @@ -437,7 +439,7 @@ static void offset_iterate_dir(struct inode *inode, struct dir_context *ctx) while (true) { dentry = offset_find_next(&xas); if (!dentry) - break; + return ERR_PTR(-ENOENT); if (!offset_dir_emit(ctx, dentry)) { dput(dentry); @@ -447,6 +449,7 @@ static void offset_iterate_dir(struct inode *inode, struct dir_context *ctx) dput(dentry); ctx->pos = xas.xa_index + 1; } + return NULL; } /** @@ -479,7 +482,12 @@ static int offset_readdir(struct file *file, struct dir_context *ctx) if (!dir_emit_dots(file, ctx)) return 0; - offset_iterate_dir(d_inode(dir), ctx); + /* In this case, ->private_data is protected by f_pos_lock */ + if (ctx->pos == 2) + file->private_data = NULL; + else if (file->private_data == ERR_PTR(-ENOENT)) + return 0; + file->private_data = offset_iterate_dir(d_inode(dir), ctx); return 0; } -- cgit v1.2.3 From 8479063f1fbee201a8739130e816cc331b675838 Mon Sep 17 00:00:00 2001 From: Charles Mirabile Date: Mon, 20 Nov 2023 05:55:45 -0500 Subject: io_uring/fs: consider link->flags when getting path for LINKAT In order for `AT_EMPTY_PATH` to work as expected, the fact that the user wants that behavior needs to make it to `getname_flags` or it will return ENOENT. Fixes: cf30da90bc3a ("io_uring: add support for IORING_OP_LINKAT") Cc: Link: https://github.com/axboe/liburing/issues/995 Signed-off-by: Charles Mirabile Link: https://lore.kernel.org/r/20231120105545.1209530-1-cmirabil@redhat.com Signed-off-by: Jens Axboe --- io_uring/fs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/io_uring/fs.c b/io_uring/fs.c index 08e3b175469c..eccea851dd5a 100644 --- a/io_uring/fs.c +++ b/io_uring/fs.c @@ -254,7 +254,7 @@ int io_linkat_prep(struct io_kiocb *req, const struct io_uring_sqe *sqe) newf = u64_to_user_ptr(READ_ONCE(sqe->addr2)); lnk->flags = READ_ONCE(sqe->hardlink_flags); - lnk->oldpath = getname(oldf); + lnk->oldpath = getname_uflags(oldf, lnk->flags); if (IS_ERR(lnk->oldpath)) return PTR_ERR(lnk->oldpath); -- cgit v1.2.3 From bb0a05acd6121ff0e810b44fdc24dbdfaa46b642 Mon Sep 17 00:00:00 2001 From: Jonas Karlman Date: Thu, 26 Oct 2023 19:14:58 +0000 Subject: drm/rockchip: vop: Fix color for RGB888/BGR888 format on VOP full Use of DRM_FORMAT_RGB888 and DRM_FORMAT_BGR888 on e.g. RK3288, RK3328 and RK3399 result in wrong colors being displayed. The issue can be observed using modetest: modetest -s @:1920x1080-60@RG24 modetest -s @:1920x1080-60@BG24 Vendor 4.4 kernel apply an inverted rb swap for these formats on VOP full framework (IP version 3.x) compared to VOP little framework (2.x). Fix colors by applying different rb swap for VOP full framework (3.x) and VOP little framework (2.x) similar to vendor 4.4 kernel. Fixes: 85a359f25388 ("drm/rockchip: Add BGR formats to VOP") Signed-off-by: Jonas Karlman Tested-by: Diederik de Haas Reviewed-by: Christopher Obbard Tested-by: Christopher Obbard Signed-off-by: Heiko Stuebner Link: https://patchwork.freedesktop.org/patch/msgid/20231026191500.2994225-1-jonas@kwiboo.se --- drivers/gpu/drm/rockchip/rockchip_drm_vop.c | 14 +++++++++++--- 1 file changed, 11 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_vop.c b/drivers/gpu/drm/rockchip/rockchip_drm_vop.c index 066299894d04..a13473b2d54c 100644 --- a/drivers/gpu/drm/rockchip/rockchip_drm_vop.c +++ b/drivers/gpu/drm/rockchip/rockchip_drm_vop.c @@ -247,14 +247,22 @@ static inline void vop_cfg_done(struct vop *vop) VOP_REG_SET(vop, common, cfg_done, 1); } -static bool has_rb_swapped(uint32_t format) +static bool has_rb_swapped(uint32_t version, uint32_t format) { switch (format) { case DRM_FORMAT_XBGR8888: case DRM_FORMAT_ABGR8888: - case DRM_FORMAT_BGR888: case DRM_FORMAT_BGR565: return true; + /* + * full framework (IP version 3.x) only need rb swapped for RGB888 and + * little framework (IP version 2.x) only need rb swapped for BGR888, + * check for 3.x to also only rb swap BGR888 for unknown vop version + */ + case DRM_FORMAT_RGB888: + return VOP_MAJOR(version) == 3; + case DRM_FORMAT_BGR888: + return VOP_MAJOR(version) != 3; default: return false; } @@ -1030,7 +1038,7 @@ static void vop_plane_atomic_update(struct drm_plane *plane, VOP_WIN_SET(vop, win, dsp_info, dsp_info); VOP_WIN_SET(vop, win, dsp_st, dsp_st); - rb_swap = has_rb_swapped(fb->format->format); + rb_swap = has_rb_swapped(vop->data->version, fb->format->format); VOP_WIN_SET(vop, win, rb_swap, rb_swap); /* -- cgit v1.2.3 From baf8fb7e0e5ec54ea0839f0c534f2cdcd79bea9c Mon Sep 17 00:00:00 2001 From: Coly Li Date: Mon, 20 Nov 2023 13:24:54 +0800 Subject: bcache: avoid oversize memory allocation by small stripe_size Arraies bcache->stripe_sectors_dirty and bcache->full_dirty_stripes are used for dirty data writeback, their sizes are decided by backing device capacity and stripe size. Larger backing device capacity or smaller stripe size make these two arraies occupies more dynamic memory space. Currently bcache->stripe_size is directly inherited from queue->limits.io_opt of underlying storage device. For normal hard drives, its limits.io_opt is 0, and bcache sets the corresponding stripe_size to 1TB (1<<31 sectors), it works fine 10+ years. But for devices do declare value for queue->limits.io_opt, small stripe_size (comparing to 1TB) becomes an issue for oversize memory allocations of bcache->stripe_sectors_dirty and bcache->full_dirty_stripes, while the capacity of hard drives gets much larger in recent decade. For example a raid5 array assembled by three 20TB hardrives, the raid device capacity is 40TB with typical 512KB limits.io_opt. After the math calculation in bcache code, these two arraies will occupy 400MB dynamic memory. Even worse Andrea Tomassetti reports that a 4KB limits.io_opt is declared on a new 2TB hard drive, then these two arraies request 2GB and 512MB dynamic memory from kzalloc(). The result is that bcache device always fails to initialize on his system. To avoid the oversize memory allocation, bcache->stripe_size should not directly inherited by queue->limits.io_opt from the underlying device. This patch defines BCH_MIN_STRIPE_SZ (4MB) as minimal bcache stripe size and set bcache device's stripe size against the declared limits.io_opt value from the underlying storage device, - If the declared limits.io_opt > BCH_MIN_STRIPE_SZ, bcache device will set its stripe size directly by this limits.io_opt value. - If the declared limits.io_opt < BCH_MIN_STRIPE_SZ, bcache device will set its stripe size by a value multiplying limits.io_opt and euqal or large than BCH_MIN_STRIPE_SZ. Then the minimal stripe size of a bcache device will always be >= 4MB. For a 40TB raid5 device with 512KB limits.io_opt, memory occupied by bcache->stripe_sectors_dirty and bcache->full_dirty_stripes will be 50MB in total. For a 2TB hard drive with 4KB limits.io_opt, memory occupied by these two arraies will be 2.5MB in total. Such mount of memory allocated for bcache->stripe_sectors_dirty and bcache->full_dirty_stripes is reasonable for most of storage devices. Reported-by: Andrea Tomassetti Signed-off-by: Coly Li Reviewed-by: Eric Wheeler Link: https://lore.kernel.org/r/20231120052503.6122-2-colyli@suse.de Signed-off-by: Jens Axboe --- drivers/md/bcache/bcache.h | 1 + drivers/md/bcache/super.c | 2 ++ 2 files changed, 3 insertions(+) diff --git a/drivers/md/bcache/bcache.h b/drivers/md/bcache/bcache.h index 05be59ae21b2..6ae2329052c9 100644 --- a/drivers/md/bcache/bcache.h +++ b/drivers/md/bcache/bcache.h @@ -265,6 +265,7 @@ struct bcache_device { #define BCACHE_DEV_WB_RUNNING 3 #define BCACHE_DEV_RATE_DW_RUNNING 4 int nr_stripes; +#define BCH_MIN_STRIPE_SZ ((4 << 20) >> SECTOR_SHIFT) unsigned int stripe_size; atomic_t *stripe_sectors_dirty; unsigned long *full_dirty_stripes; diff --git a/drivers/md/bcache/super.c b/drivers/md/bcache/super.c index 8bd899766372..c7ecc7058d77 100644 --- a/drivers/md/bcache/super.c +++ b/drivers/md/bcache/super.c @@ -905,6 +905,8 @@ static int bcache_device_init(struct bcache_device *d, unsigned int block_size, if (!d->stripe_size) d->stripe_size = 1 << 31; + else if (d->stripe_size < BCH_MIN_STRIPE_SZ) + d->stripe_size = roundup(BCH_MIN_STRIPE_SZ, d->stripe_size); n = DIV_ROUND_UP_ULL(sectors, d->stripe_size); if (!n || n > max_stripes) { -- cgit v1.2.3 From 777967e7e9f6f5f3e153abffb562bffaf4430d26 Mon Sep 17 00:00:00 2001 From: Coly Li Date: Mon, 20 Nov 2023 13:24:55 +0800 Subject: bcache: check return value from btree_node_alloc_replacement() In btree_gc_rewrite_node(), pointer 'n' is not checked after it returns from btree_gc_rewrite_node(). There is potential possibility that 'n' is a non NULL ERR_PTR(), referencing such error code is not permitted in following code. Therefore a return value checking is necessary after 'n' is back from btree_node_alloc_replacement(). Signed-off-by: Coly Li Reported-by: Dan Carpenter Cc: Link: https://lore.kernel.org/r/20231120052503.6122-3-colyli@suse.de Signed-off-by: Jens Axboe --- drivers/md/bcache/btree.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/md/bcache/btree.c b/drivers/md/bcache/btree.c index ae5cbb55861f..de8d552201dc 100644 --- a/drivers/md/bcache/btree.c +++ b/drivers/md/bcache/btree.c @@ -1532,6 +1532,8 @@ static int btree_gc_rewrite_node(struct btree *b, struct btree_op *op, return 0; n = btree_node_alloc_replacement(replace, NULL); + if (IS_ERR(n)) + return 0; /* recheck reserve after allocating replacement node */ if (btree_check_reserve(b, NULL)) { -- cgit v1.2.3 From be93825f0e6428c2d3f03a6e4d447dc48d33d7ff Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Mon, 20 Nov 2023 13:24:56 +0800 Subject: bcache: remove redundant assignment to variable cur_idx Variable cur_idx is being initialized with a value that is never read, it is being re-assigned later in a while-loop. Remove the redundant assignment. Cleans up clang scan build warning: drivers/md/bcache/writeback.c:916:2: warning: Value stored to 'cur_idx' is never read [deadcode.DeadStores] Signed-off-by: Colin Ian King Reviewed-by: Coly Li Signed-off-by: Coly Li Link: https://lore.kernel.org/r/20231120052503.6122-4-colyli@suse.de Signed-off-by: Jens Axboe --- drivers/md/bcache/writeback.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/md/bcache/writeback.c b/drivers/md/bcache/writeback.c index 24c049067f61..c3e872e0a6f2 100644 --- a/drivers/md/bcache/writeback.c +++ b/drivers/md/bcache/writeback.c @@ -913,7 +913,7 @@ static int bch_dirty_init_thread(void *arg) int cur_idx, prev_idx, skip_nr; k = p = NULL; - cur_idx = prev_idx = 0; + prev_idx = 0; bch_btree_iter_init(&c->root->keys, &iter, NULL); k = bch_btree_iter_next_filter(&iter, &c->root->keys, bch_ptr_bad); -- cgit v1.2.3 From 2c7f497ac274a14330208b18f6f734000868ebf9 Mon Sep 17 00:00:00 2001 From: Rand Deeb Date: Mon, 20 Nov 2023 13:24:57 +0800 Subject: bcache: prevent potential division by zero error In SHOW(), the variable 'n' is of type 'size_t.' While there is a conditional check to verify that 'n' is not equal to zero before executing the 'do_div' macro, concerns arise regarding potential division by zero error in 64-bit environments. The concern arises when 'n' is 64 bits in size, greater than zero, and the lower 32 bits of it are zeros. In such cases, the conditional check passes because 'n' is non-zero, but the 'do_div' macro casts 'n' to 'uint32_t,' effectively truncating it to its lower 32 bits. Consequently, the 'n' value becomes zero. To fix this potential division by zero error and ensure precise division handling, this commit replaces the 'do_div' macro with div64_u64(). div64_u64() is designed to work with 64-bit operands, guaranteeing that division is performed correctly. This change enhances the robustness of the code, ensuring that division operations yield accurate results in all scenarios, eliminating the possibility of division by zero, and improving compatibility across different 64-bit environments. Found by Linux Verification Center (linuxtesting.org) with SVACE. Signed-off-by: Rand Deeb Cc: Signed-off-by: Coly Li Link: https://lore.kernel.org/r/20231120052503.6122-5-colyli@suse.de Signed-off-by: Jens Axboe --- drivers/md/bcache/sysfs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/md/bcache/sysfs.c b/drivers/md/bcache/sysfs.c index 45d8af755de6..a438efb66069 100644 --- a/drivers/md/bcache/sysfs.c +++ b/drivers/md/bcache/sysfs.c @@ -1104,7 +1104,7 @@ SHOW(__bch_cache) sum += INITIAL_PRIO - cached[i]; if (n) - do_div(sum, n); + sum = div64_u64(sum, n); for (i = 0; i < ARRAY_SIZE(q); i++) q[i] = INITIAL_PRIO - cached[n * (i + 1) / -- cgit v1.2.3 From 7cc47e64d3d69786a2711a4767e26b26ba63d7ed Mon Sep 17 00:00:00 2001 From: Mingzhe Zou Date: Mon, 20 Nov 2023 13:24:58 +0800 Subject: bcache: fixup init dirty data errors We found that after long run, the dirty_data of the bcache device will have errors. This error cannot be eliminated unless re-register. We also found that reattach after detach, this error can accumulate. In bch_sectors_dirty_init(), all inode <= d->id keys will be recounted again. This is wrong, we only need to count the keys of the current device. Fixes: b144e45fc576 ("bcache: make bch_sectors_dirty_init() to be multithreaded") Signed-off-by: Mingzhe Zou Cc: Signed-off-by: Coly Li Link: https://lore.kernel.org/r/20231120052503.6122-6-colyli@suse.de Signed-off-by: Jens Axboe --- drivers/md/bcache/writeback.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/md/bcache/writeback.c b/drivers/md/bcache/writeback.c index c3e872e0a6f2..77fb72ac6b81 100644 --- a/drivers/md/bcache/writeback.c +++ b/drivers/md/bcache/writeback.c @@ -991,8 +991,11 @@ void bch_sectors_dirty_init(struct bcache_device *d) op.count = 0; for_each_key_filter(&c->root->keys, - k, &iter, bch_ptr_invalid) + k, &iter, bch_ptr_invalid) { + if (KEY_INODE(k) != op.inode) + continue; sectors_dirty_init_fn(&op.op, c->root, k); + } rw_unlock(0, c->root); return; -- cgit v1.2.3 From e34820f984512b433ee1fc291417e60c47d56727 Mon Sep 17 00:00:00 2001 From: Mingzhe Zou Date: Mon, 20 Nov 2023 13:24:59 +0800 Subject: bcache: fixup lock c->root error MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit We had a problem with io hung because it was waiting for c->root to release the lock. crash> cache_set.root -l cache_set.list ffffa03fde4c0050 root = 0xffff802ef454c800 crash> btree -o 0xffff802ef454c800 | grep rw_semaphore [ffff802ef454c858] struct rw_semaphore lock; crash> struct rw_semaphore ffff802ef454c858 struct rw_semaphore { count = { counter = -4294967297 }, wait_list = { next = 0xffff00006786fc28, prev = 0xffff00005d0efac8 }, wait_lock = { raw_lock = { { val = { counter = 0 }, { locked = 0 '\000', pending = 0 '\000' }, { locked_pending = 0, tail = 0 } } } }, osq = { tail = { counter = 0 } }, owner = 0xffffa03fdc586603 } The "counter = -4294967297" means that lock count is -1 and a write lock is being attempted. Then, we found that there is a btree with a counter of 1 in btree_cache_freeable. crash> cache_set -l cache_set.list ffffa03fde4c0050 -o|grep btree_cache [ffffa03fde4c1140] struct list_head btree_cache; [ffffa03fde4c1150] struct list_head btree_cache_freeable; [ffffa03fde4c1160] struct list_head btree_cache_freed; [ffffa03fde4c1170] unsigned int btree_cache_used; [ffffa03fde4c1178] wait_queue_head_t btree_cache_wait; [ffffa03fde4c1190] struct task_struct *btree_cache_alloc_lock; crash> list -H ffffa03fde4c1140|wc -l 973 crash> list -H ffffa03fde4c1150|wc -l 1123 crash> cache_set.btree_cache_used -l cache_set.list ffffa03fde4c0050 btree_cache_used = 2097 crash> list -s btree -l btree.list -H ffffa03fde4c1140|grep -E -A2 "^ lock = {" > btree_cache.txt crash> list -s btree -l btree.list -H ffffa03fde4c1150|grep -E -A2 "^ lock = {" > btree_cache_freeable.txt [root@node-3 127.0.0.1-2023-08-04-16:40:28]# pwd /var/crash/127.0.0.1-2023-08-04-16:40:28 [root@node-3 127.0.0.1-2023-08-04-16:40:28]# cat btree_cache.txt|grep counter|grep -v "counter = 0" [root@node-3 127.0.0.1-2023-08-04-16:40:28]# cat btree_cache_freeable.txt|grep counter|grep -v "counter = 0" counter = 1 We found that this is a bug in bch_sectors_dirty_init() when locking c->root: (1). Thread X has locked c->root(A) write. (2). Thread Y failed to lock c->root(A), waiting for the lock(c->root A). (3). Thread X bch_btree_set_root() changes c->root from A to B. (4). Thread X releases the lock(c->root A). (5). Thread Y successfully locks c->root(A). (6). Thread Y releases the lock(c->root B). down_write locked ---(1)----------------------┐ | | | down_read waiting ---(2)----┐ | | | ┌-------------┐ ┌-------------┐ bch_btree_set_root ===(3)========>> | c->root A | | c->root B | | | └-------------┘ └-------------┘ up_write ---(4)---------------------┘ | | | | | down_read locked ---(5)-----------┘ | | | up_read ---(6)-----------------------------┘ Since c->root may change, the correct steps to lock c->root should be the same as bch_root_usage(), compare after locking. static unsigned int bch_root_usage(struct cache_set *c) { unsigned int bytes = 0; struct bkey *k; struct btree *b; struct btree_iter iter; goto lock_root; do { rw_unlock(false, b); lock_root: b = c->root; rw_lock(false, b, b->level); } while (b != c->root); for_each_key_filter(&b->keys, k, &iter, bch_ptr_bad) bytes += bkey_bytes(k); rw_unlock(false, b); return (bytes * 100) / btree_bytes(c); } Fixes: b144e45fc576 ("bcache: make bch_sectors_dirty_init() to be multithreaded") Signed-off-by: Mingzhe Zou Cc: Signed-off-by: Coly Li Link: https://lore.kernel.org/r/20231120052503.6122-7-colyli@suse.de Signed-off-by: Jens Axboe --- drivers/md/bcache/writeback.c | 14 +++++++++++--- 1 file changed, 11 insertions(+), 3 deletions(-) diff --git a/drivers/md/bcache/writeback.c b/drivers/md/bcache/writeback.c index 77fb72ac6b81..a1d760916246 100644 --- a/drivers/md/bcache/writeback.c +++ b/drivers/md/bcache/writeback.c @@ -977,14 +977,22 @@ static int bch_btre_dirty_init_thread_nr(void) void bch_sectors_dirty_init(struct bcache_device *d) { int i; + struct btree *b = NULL; struct bkey *k = NULL; struct btree_iter iter; struct sectors_dirty_init op; struct cache_set *c = d->c; struct bch_dirty_init_state state; +retry_lock: + b = c->root; + rw_lock(0, b, b->level); + if (b != c->root) { + rw_unlock(0, b); + goto retry_lock; + } + /* Just count root keys if no leaf node */ - rw_lock(0, c->root, c->root->level); if (c->root->level == 0) { bch_btree_op_init(&op.op, -1); op.inode = d->id; @@ -997,7 +1005,7 @@ void bch_sectors_dirty_init(struct bcache_device *d) sectors_dirty_init_fn(&op.op, c->root, k); } - rw_unlock(0, c->root); + rw_unlock(0, b); return; } @@ -1033,7 +1041,7 @@ void bch_sectors_dirty_init(struct bcache_device *d) out: /* Must wait for all threads to stop. */ wait_event(state.wait, atomic_read(&state.started) == 0); - rw_unlock(0, c->root); + rw_unlock(0, b); } void bch_cached_dev_writeback_init(struct cached_dev *dc) -- cgit v1.2.3 From 2faac25d7958c4761bb8cec54adb79f806783ad6 Mon Sep 17 00:00:00 2001 From: Mingzhe Zou Date: Mon, 20 Nov 2023 13:25:00 +0800 Subject: bcache: fixup multi-threaded bch_sectors_dirty_init() wake-up race We get a kernel crash about "unable to handle kernel paging request": ```dmesg [368033.032005] BUG: unable to handle kernel paging request at ffffffffad9ae4b5 [368033.032007] PGD fc3a0d067 P4D fc3a0d067 PUD fc3a0e063 PMD 8000000fc38000e1 [368033.032012] Oops: 0003 [#1] SMP PTI [368033.032015] CPU: 23 PID: 55090 Comm: bch_dirtcnt[0] Kdump: loaded Tainted: G OE --------- - - 4.18.0-147.5.1.es8_24.x86_64 #1 [368033.032017] Hardware name: Tsinghua Tongfang THTF Chaoqiang Server/072T6D, BIOS 2.4.3 01/17/2017 [368033.032027] RIP: 0010:native_queued_spin_lock_slowpath+0x183/0x1d0 [368033.032029] Code: 8b 02 48 85 c0 74 f6 48 89 c1 eb d0 c1 e9 12 83 e0 03 83 e9 01 48 c1 e0 05 48 63 c9 48 05 c0 3d 02 00 48 03 04 cd 60 68 93 ad <48> 89 10 8b 42 08 85 c0 75 09 f3 90 8b 42 08 85 c0 74 f7 48 8b 02 [368033.032031] RSP: 0018:ffffbb48852abe00 EFLAGS: 00010082 [368033.032032] RAX: ffffffffad9ae4b5 RBX: 0000000000000246 RCX: 0000000000003bf3 [368033.032033] RDX: ffff97b0ff8e3dc0 RSI: 0000000000600000 RDI: ffffbb4884743c68 [368033.032034] RBP: 0000000000000001 R08: 0000000000000000 R09: 000007ffffffffff [368033.032035] R10: ffffbb486bb01000 R11: 0000000000000001 R12: ffffffffc068da70 [368033.032036] R13: 0000000000000003 R14: 0000000000000000 R15: 0000000000000000 [368033.032038] FS: 0000000000000000(0000) GS:ffff97b0ff8c0000(0000) knlGS:0000000000000000 [368033.032039] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [368033.032040] CR2: ffffffffad9ae4b5 CR3: 0000000fc3a0a002 CR4: 00000000003626e0 [368033.032042] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [368033.032043] bcache: bch_cached_dev_attach() Caching rbd479 as bcache462 on set 8cff3c36-4a76-4242-afaa-7630206bc70b [368033.032045] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [368033.032046] Call Trace: [368033.032054] _raw_spin_lock_irqsave+0x32/0x40 [368033.032061] __wake_up_common_lock+0x63/0xc0 [368033.032073] ? bch_ptr_invalid+0x10/0x10 [bcache] [368033.033502] bch_dirty_init_thread+0x14c/0x160 [bcache] [368033.033511] ? read_dirty_submit+0x60/0x60 [bcache] [368033.033516] kthread+0x112/0x130 [368033.033520] ? kthread_flush_work_fn+0x10/0x10 [368033.034505] ret_from_fork+0x35/0x40 ``` The crash occurred when call wake_up(&state->wait), and then we want to look at the value in the state. However, bch_sectors_dirty_init() is not found in the stack of any task. Since state is allocated on the stack, we guess that bch_sectors_dirty_init() has exited, causing bch_dirty_init_thread() to be unable to handle kernel paging request. In order to verify this idea, we added some printing information during wake_up(&state->wait). We find that "wake up" is printed twice, however we only expect the last thread to wake up once. ```dmesg [ 994.641004] alcache: bch_dirty_init_thread() wake up [ 994.641018] alcache: bch_dirty_init_thread() wake up [ 994.641523] alcache: bch_sectors_dirty_init() init exit ``` There is a race. If bch_sectors_dirty_init() exits after the first wake up, the second wake up will trigger this bug("unable to handle kernel paging request"). Proceed as follows: bch_sectors_dirty_init kthread_run ==============> bch_dirty_init_thread(bch_dirtcnt[0]) ... ... atomic_inc(&state.started) ... ... ... atomic_read(&state.enough) ... ... atomic_set(&state->enough, 1) kthread_run ======================================================> bch_dirty_init_thread(bch_dirtcnt[1]) ... atomic_dec_and_test(&state->started) ... atomic_inc(&state.started) ... ... ... wake_up(&state->wait) ... atomic_read(&state.enough) atomic_dec_and_test(&state->started) ... ... wait_event(state.wait, atomic_read(&state.started) == 0) ... return ... wake_up(&state->wait) We believe it is very common to wake up twice if there is no dirty, but crash is an extremely low probability event. It's hard for us to reproduce this issue. We attached and detached continuously for a week, with a total of more than one million attaches and only one crash. Putting atomic_inc(&state.started) before kthread_run() can avoid waking up twice. Fixes: b144e45fc576 ("bcache: make bch_sectors_dirty_init() to be multithreaded") Signed-off-by: Mingzhe Zou Cc: Signed-off-by: Coly Li Link: https://lore.kernel.org/r/20231120052503.6122-8-colyli@suse.de Signed-off-by: Jens Axboe --- drivers/md/bcache/writeback.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/md/bcache/writeback.c b/drivers/md/bcache/writeback.c index a1d760916246..3accfdaee6b1 100644 --- a/drivers/md/bcache/writeback.c +++ b/drivers/md/bcache/writeback.c @@ -1025,17 +1025,18 @@ retry_lock: if (atomic_read(&state.enough)) break; + atomic_inc(&state.started); state.infos[i].state = &state; state.infos[i].thread = kthread_run(bch_dirty_init_thread, &state.infos[i], "bch_dirtcnt[%d]", i); if (IS_ERR(state.infos[i].thread)) { pr_err("fails to run thread bch_dirty_init[%d]\n", i); + atomic_dec(&state.started); for (--i; i >= 0; i--) kthread_stop(state.infos[i].thread); goto out; } - atomic_inc(&state.started); } out: -- cgit v1.2.3 From f72f4312d4388376fc8a1f6cf37cb21a0d41758b Mon Sep 17 00:00:00 2001 From: Coly Li Date: Mon, 20 Nov 2023 13:25:01 +0800 Subject: bcache: replace a mistaken IS_ERR() by IS_ERR_OR_NULL() in btree_gc_coalesce() Commit 028ddcac477b ("bcache: Remove unnecessary NULL point check in node allocations") do the following change inside btree_gc_coalesce(), 31 @@ -1340,7 +1340,7 @@ static int btree_gc_coalesce( 32 memset(new_nodes, 0, sizeof(new_nodes)); 33 closure_init_stack(&cl); 34 35 - while (nodes < GC_MERGE_NODES && !IS_ERR_OR_NULL(r[nodes].b)) 36 + while (nodes < GC_MERGE_NODES && !IS_ERR(r[nodes].b)) 37 keys += r[nodes++].keys; 38 39 blocks = btree_default_blocks(b->c) * 2 / 3; At line 35 the original r[nodes].b is not always allocatored from __bch_btree_node_alloc(), and possibly initialized as NULL pointer by caller of btree_gc_coalesce(). Therefore the change at line 36 is not correct. This patch replaces the mistaken IS_ERR() by IS_ERR_OR_NULL() to avoid potential issue. Fixes: 028ddcac477b ("bcache: Remove unnecessary NULL point check in node allocations") Cc: # 6.5+ Cc: Zheng Wang Signed-off-by: Coly Li Link: https://lore.kernel.org/r/20231120052503.6122-9-colyli@suse.de Signed-off-by: Jens Axboe --- drivers/md/bcache/btree.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/md/bcache/btree.c b/drivers/md/bcache/btree.c index de8d552201dc..79f1fa4a0d55 100644 --- a/drivers/md/bcache/btree.c +++ b/drivers/md/bcache/btree.c @@ -1368,7 +1368,7 @@ static int btree_gc_coalesce(struct btree *b, struct btree_op *op, memset(new_nodes, 0, sizeof(new_nodes)); closure_init_stack(&cl); - while (nodes < GC_MERGE_NODES && !IS_ERR(r[nodes].b)) + while (nodes < GC_MERGE_NODES && !IS_ERR_OR_NULL(r[nodes].b)) keys += r[nodes++].keys; blocks = btree_default_blocks(b->c) * 2 / 3; -- cgit v1.2.3 From 31f5b956a197d4ec25c8a07cb3a2ab69d0c0b82f Mon Sep 17 00:00:00 2001 From: Coly Li Date: Mon, 20 Nov 2023 13:25:02 +0800 Subject: bcache: add code comments for bch_btree_node_get() and __bch_btree_node_alloc() This patch adds code comments to bch_btree_node_get() and __bch_btree_node_alloc() that NULL pointer will not be returned and it is unnecessary to check NULL pointer by the callers of these routines. Signed-off-by: Coly Li Link: https://lore.kernel.org/r/20231120052503.6122-10-colyli@suse.de Signed-off-by: Jens Axboe --- drivers/md/bcache/btree.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/md/bcache/btree.c b/drivers/md/bcache/btree.c index 79f1fa4a0d55..de3019972b35 100644 --- a/drivers/md/bcache/btree.c +++ b/drivers/md/bcache/btree.c @@ -1000,6 +1000,9 @@ err: * * The btree node will have either a read or a write lock held, depending on * level and op->lock. + * + * Note: Only error code or btree pointer will be returned, it is unncessary + * for callers to check NULL pointer. */ struct btree *bch_btree_node_get(struct cache_set *c, struct btree_op *op, struct bkey *k, int level, bool write, @@ -1111,6 +1114,10 @@ retry: mutex_unlock(&b->c->bucket_lock); } +/* + * Only error code or btree pointer will be returned, it is unncessary for + * callers to check NULL pointer. + */ struct btree *__bch_btree_node_alloc(struct cache_set *c, struct btree_op *op, int level, bool wait, struct btree *parent) -- cgit v1.2.3 From 3eba5e0b2422aec3c9e79822029599961fdcab97 Mon Sep 17 00:00:00 2001 From: Coly Li Date: Mon, 20 Nov 2023 13:25:03 +0800 Subject: bcache: avoid NULL checking to c->root in run_cache_set() In run_cache_set() after c->root returned from bch_btree_node_get(), it is checked by IS_ERR_OR_NULL(). Indeed it is unncessary to check NULL because bch_btree_node_get() will not return NULL pointer to caller. This patch replaces IS_ERR_OR_NULL() by IS_ERR() for the above reason. Signed-off-by: Coly Li Link: https://lore.kernel.org/r/20231120052503.6122-11-colyli@suse.de Signed-off-by: Jens Axboe --- drivers/md/bcache/super.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/md/bcache/super.c b/drivers/md/bcache/super.c index c7ecc7058d77..bfe1685dbae5 100644 --- a/drivers/md/bcache/super.c +++ b/drivers/md/bcache/super.c @@ -2018,7 +2018,7 @@ static int run_cache_set(struct cache_set *c) c->root = bch_btree_node_get(c, NULL, k, j->btree_level, true, NULL); - if (IS_ERR_OR_NULL(c->root)) + if (IS_ERR(c->root)) goto err; list_del_init(&c->root->list); -- cgit v1.2.3 From 9bb69ba4c177dccaa1f5b5cbdf80b67813328348 Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Fri, 27 Oct 2023 19:36:51 +0100 Subject: ACPI: processor_idle: use raw_safe_halt() in acpi_idle_play_dead() Xen HVM guests were observed taking triple-faults when attempting to online a previously offlined vCPU. Investigation showed that the fault was coming from a failing call to lockdep_assert_irqs_disabled(), in load_current_idt() which was too early in the CPU bringup to actually catch the exception and report the failure cleanly. This was a false positive, caused by acpi_idle_play_dead() setting the per-cpu hardirqs_enabled flag by calling safe_halt(). Switch it to use raw_safe_halt() instead, which doesn't do so. Signed-off-by: David Woodhouse Acked-by: Peter Zijlstra (Intel) Cc: 6.6+ # 6.6+ Signed-off-by: Rafael J. Wysocki --- drivers/acpi/processor_idle.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c index 3a34a8c425fe..55437f5e0c3a 100644 --- a/drivers/acpi/processor_idle.c +++ b/drivers/acpi/processor_idle.c @@ -592,7 +592,7 @@ static int acpi_idle_play_dead(struct cpuidle_device *dev, int index) while (1) { if (cx->entry_method == ACPI_CSTATE_HALT) - safe_halt(); + raw_safe_halt(); else if (cx->entry_method == ACPI_CSTATE_SYSTEMIO) { io_idle(cx->address); } else -- cgit v1.2.3 From 37ba91a82e3b9de35f64348c62b5ec7d74e3a41c Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sun, 12 Nov 2023 21:36:26 +0100 Subject: ACPI: PM: Add acpi_device_fix_up_power_children() function In some cases it is necessary to fix-up the power-state of an ACPI device's children without touching the ACPI device itself add a new acpi_device_fix_up_power_children() function for this. Signed-off-by: Hans de Goede Cc: 6.6+ # 6.6+ Signed-off-by: Rafael J. Wysocki --- drivers/acpi/device_pm.c | 13 +++++++++++++ include/acpi/acpi_bus.h | 1 + 2 files changed, 14 insertions(+) diff --git a/drivers/acpi/device_pm.c b/drivers/acpi/device_pm.c index f007116a8427..3b4d048c4941 100644 --- a/drivers/acpi/device_pm.c +++ b/drivers/acpi/device_pm.c @@ -397,6 +397,19 @@ void acpi_device_fix_up_power_extended(struct acpi_device *adev) } EXPORT_SYMBOL_GPL(acpi_device_fix_up_power_extended); +/** + * acpi_device_fix_up_power_children - Force a device's children into D0. + * @adev: Parent device object whose children's power state is to be fixed up. + * + * Call acpi_device_fix_up_power() for @adev's children so long as they + * are reported as present and enabled. + */ +void acpi_device_fix_up_power_children(struct acpi_device *adev) +{ + acpi_dev_for_each_child(adev, fix_up_power_if_applicable, NULL); +} +EXPORT_SYMBOL_GPL(acpi_device_fix_up_power_children); + int acpi_device_update_power(struct acpi_device *device, int *state_p) { int state; diff --git a/include/acpi/acpi_bus.h b/include/acpi/acpi_bus.h index afeed6e72049..1216d72c650f 100644 --- a/include/acpi/acpi_bus.h +++ b/include/acpi/acpi_bus.h @@ -542,6 +542,7 @@ int acpi_device_set_power(struct acpi_device *device, int state); int acpi_bus_init_power(struct acpi_device *device); int acpi_device_fix_up_power(struct acpi_device *device); void acpi_device_fix_up_power_extended(struct acpi_device *adev); +void acpi_device_fix_up_power_children(struct acpi_device *adev); int acpi_bus_update_power(acpi_handle handle, int *state_p); int acpi_device_update_power(struct acpi_device *device, int *state_p); bool acpi_bus_power_manageable(acpi_handle handle); -- cgit v1.2.3 From c93695494606326d7fd72b46a2a657139ccb0dec Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sun, 12 Nov 2023 21:36:27 +0100 Subject: ACPI: video: Use acpi_device_fix_up_power_children() Commit 89c290ea7589 ("ACPI: video: Put ACPI video and its child devices into D0 on boot") introduced calling acpi_device_fix_up_power_extended() on the video card for which the ACPI video bus is the companion device. This unnecessarily touches the power-state of the GPU itself, while the issue it tries to address only requires calling _PS0 on the child devices. Touching the power-state of the GPU itself is causing suspend / resume issues on e.g. a Lenovo ThinkPad W530. Instead use acpi_device_fix_up_power_children(), which only touches the child devices, to fix this. Fixes: 89c290ea7589 ("ACPI: video: Put ACPI video and its child devices into D0 on boot") Reported-by: Owen T. Heisler Closes: https://lore.kernel.org/regressions/9f36fb06-64c4-4264-aaeb-4e1289e764c4@owenh.net/ Closes: https://gitlab.freedesktop.org/drm/nouveau/-/issues/273 Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218124 Tested-by: Kai-Heng Feng Tested-by: Owen T. Heisler Signed-off-by: Hans de Goede Cc: 6.6+ # 6.6+ Signed-off-by: Rafael J. Wysocki --- drivers/acpi/acpi_video.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/acpi/acpi_video.c b/drivers/acpi/acpi_video.c index 0b7a01f38b65..d321ca7160d9 100644 --- a/drivers/acpi/acpi_video.c +++ b/drivers/acpi/acpi_video.c @@ -2031,7 +2031,7 @@ static int acpi_video_bus_add(struct acpi_device *device) * HP ZBook Fury 16 G10 requires ACPI video's child devices have _PS0 * evaluated to have functional panel brightness control. */ - acpi_device_fix_up_power_extended(device); + acpi_device_fix_up_power_children(device); pr_info("%s [%s] (multi-head: %s rom: %s post: %s)\n", ACPI_VIDEO_DEVICE_NAME, acpi_device_bid(device), -- cgit v1.2.3 From bd911485294a6f0596e4592ed442438015cffc8a Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Wed, 15 Nov 2023 19:02:22 +0100 Subject: ACPI: resource: Skip IRQ override on ASUS ExpertBook B1402CVA Like various other ASUS ExpertBook-s, the ASUS ExpertBook B1402CVA has an ACPI DSDT table that describes IRQ 1 as ActiveLow while the kernel overrides it to EdgeHigh. This prevents the keyboard from working. To fix this issue, add this laptop to the skip_override_table so that the kernel does not override IRQ 1. Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218114 Cc: All applicable Signed-off-by: Hans de Goede Signed-off-by: Rafael J. Wysocki --- drivers/acpi/resource.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/acpi/resource.c b/drivers/acpi/resource.c index 15a3bdbd0755..9bd9f79cd409 100644 --- a/drivers/acpi/resource.c +++ b/drivers/acpi/resource.c @@ -447,6 +447,13 @@ static const struct dmi_system_id irq1_level_low_skip_override[] = { DMI_MATCH(DMI_BOARD_NAME, "B1402CBA"), }, }, + { + /* Asus ExpertBook B1402CVA */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."), + DMI_MATCH(DMI_BOARD_NAME, "B1402CVA"), + }, + }, { /* Asus ExpertBook B1502CBA */ .matches = { -- cgit v1.2.3 From b85e2dab33ce467e8dcf1cb6c0c587132ff17f56 Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Wed, 15 Nov 2023 11:47:51 -0500 Subject: PM: tools: Fix sleepgraph syntax error The sleepgraph tool currently fails: File "/usr/bin/sleepgraph", line 4155 or re.match('psci: CPU(?P[0-9]*) killed.*', msg)): ^ SyntaxError: unmatched ')' Fixes: 34ea427e01ea ("PM: tools: sleepgraph: Recognize "CPU killed" messages") Signed-off-by: David Woodhouse Reviewed-by: Wolfram Sang Signed-off-by: Rafael J. Wysocki --- tools/power/pm-graph/sleepgraph.py | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/power/pm-graph/sleepgraph.py b/tools/power/pm-graph/sleepgraph.py index 4a356a706785..40ad221e8881 100755 --- a/tools/power/pm-graph/sleepgraph.py +++ b/tools/power/pm-graph/sleepgraph.py @@ -4151,7 +4151,7 @@ def parseKernelLog(data): elif(re.match('Enabling non-boot CPUs .*', msg)): # start of first cpu resume cpu_start = ktime - elif(re.match('smpboot: CPU (?P[0-9]*) is now offline', msg)) \ + elif(re.match('smpboot: CPU (?P[0-9]*) is now offline', msg) \ or re.match('psci: CPU(?P[0-9]*) killed.*', msg)): # end of a cpu suspend, start of the next m = re.match('smpboot: CPU (?P[0-9]*) is now offline', msg) -- cgit v1.2.3 From 1b59860540a4018e8071dc18d4893ec389506b7d Mon Sep 17 00:00:00 2001 From: Li Nan Date: Fri, 17 Nov 2023 00:23:14 +0800 Subject: nbd: fold nbd config initialization into nbd_alloc_config() There are no functional changes, make the code cleaner and prepare to fix null-ptr-dereference while accessing 'nbd->config'. Signed-off-by: Li Nan Reviewed-by: Josef Bacik Link: https://lore.kernel.org/r/20231116162316.1740402-2-linan666@huaweicloud.com Signed-off-by: Jens Axboe --- drivers/block/nbd.c | 41 +++++++++++++++++++---------------------- 1 file changed, 19 insertions(+), 22 deletions(-) diff --git a/drivers/block/nbd.c b/drivers/block/nbd.c index 855fdf5c3b4e..02f844832d91 100644 --- a/drivers/block/nbd.c +++ b/drivers/block/nbd.c @@ -1530,17 +1530,20 @@ static int nbd_ioctl(struct block_device *bdev, blk_mode_t mode, return error; } -static struct nbd_config *nbd_alloc_config(void) +static int nbd_alloc_and_init_config(struct nbd_device *nbd) { struct nbd_config *config; + if (WARN_ON(nbd->config)) + return -EINVAL; + if (!try_module_get(THIS_MODULE)) - return ERR_PTR(-ENODEV); + return -ENODEV; config = kzalloc(sizeof(struct nbd_config), GFP_NOFS); if (!config) { module_put(THIS_MODULE); - return ERR_PTR(-ENOMEM); + return -ENOMEM; } atomic_set(&config->recv_threads, 0); @@ -1548,7 +1551,10 @@ static struct nbd_config *nbd_alloc_config(void) init_waitqueue_head(&config->conn_wait); config->blksize_bits = NBD_DEF_BLKSIZE_BITS; atomic_set(&config->live_connections, 0); - return config; + nbd->config = config; + refcount_set(&nbd->config_refs, 1); + + return 0; } static int nbd_open(struct gendisk *disk, blk_mode_t mode) @@ -1567,21 +1573,17 @@ static int nbd_open(struct gendisk *disk, blk_mode_t mode) goto out; } if (!refcount_inc_not_zero(&nbd->config_refs)) { - struct nbd_config *config; - mutex_lock(&nbd->config_lock); if (refcount_inc_not_zero(&nbd->config_refs)) { mutex_unlock(&nbd->config_lock); goto out; } - config = nbd_alloc_config(); - if (IS_ERR(config)) { - ret = PTR_ERR(config); + ret = nbd_alloc_and_init_config(nbd); + if (ret) { mutex_unlock(&nbd->config_lock); goto out; } - nbd->config = config; - refcount_set(&nbd->config_refs, 1); + refcount_inc(&nbd->refs); mutex_unlock(&nbd->config_lock); if (max_part) @@ -1990,22 +1992,17 @@ again: pr_err("nbd%d already in use\n", index); return -EBUSY; } - if (WARN_ON(nbd->config)) { - mutex_unlock(&nbd->config_lock); - nbd_put(nbd); - return -EINVAL; - } - config = nbd_alloc_config(); - if (IS_ERR(config)) { + + ret = nbd_alloc_and_init_config(nbd); + if (ret) { mutex_unlock(&nbd->config_lock); nbd_put(nbd); pr_err("couldn't allocate config\n"); - return PTR_ERR(config); + return ret; } - nbd->config = config; - refcount_set(&nbd->config_refs, 1); - set_bit(NBD_RT_BOUND, &config->runtime_flags); + config = nbd->config; + set_bit(NBD_RT_BOUND, &config->runtime_flags); ret = nbd_genl_size_set(info, nbd); if (ret) goto out; -- cgit v1.2.3 From 3123ac77923341774ca3ad1196ad20bb0732bf70 Mon Sep 17 00:00:00 2001 From: Li Nan Date: Fri, 17 Nov 2023 00:23:15 +0800 Subject: nbd: factor out a helper to get nbd_config without holding 'config_lock' There are no functional changes, just to make code cleaner and prepare to fix null-ptr-dereference while accessing 'nbd->config'. Signed-off-by: Li Nan Reviewed-by: Josef Bacik Link: https://lore.kernel.org/r/20231116162316.1740402-3-linan666@huaweicloud.com Signed-off-by: Jens Axboe --- drivers/block/nbd.c | 27 +++++++++++++++++++-------- 1 file changed, 19 insertions(+), 8 deletions(-) diff --git a/drivers/block/nbd.c b/drivers/block/nbd.c index 02f844832d91..daaf8805e876 100644 --- a/drivers/block/nbd.c +++ b/drivers/block/nbd.c @@ -395,6 +395,14 @@ static u32 req_to_nbd_cmd_type(struct request *req) } } +static struct nbd_config *nbd_get_config_unlocked(struct nbd_device *nbd) +{ + if (refcount_inc_not_zero(&nbd->config_refs)) + return nbd->config; + + return NULL; +} + static enum blk_eh_timer_return nbd_xmit_timeout(struct request *req) { struct nbd_cmd *cmd = blk_mq_rq_to_pdu(req); @@ -409,13 +417,13 @@ static enum blk_eh_timer_return nbd_xmit_timeout(struct request *req) return BLK_EH_DONE; } - if (!refcount_inc_not_zero(&nbd->config_refs)) { + config = nbd_get_config_unlocked(nbd); + if (!config) { cmd->status = BLK_STS_TIMEOUT; __clear_bit(NBD_CMD_INFLIGHT, &cmd->flags); mutex_unlock(&cmd->lock); goto done; } - config = nbd->config; if (config->num_connections > 1 || (config->num_connections == 1 && nbd->tag_set.timeout)) { @@ -977,12 +985,12 @@ static int nbd_handle_cmd(struct nbd_cmd *cmd, int index) struct nbd_sock *nsock; int ret; - if (!refcount_inc_not_zero(&nbd->config_refs)) { + config = nbd_get_config_unlocked(nbd); + if (!config) { dev_err_ratelimited(disk_to_dev(nbd->disk), "Socks array is empty\n"); return -EINVAL; } - config = nbd->config; if (index >= config->num_connections) { dev_err_ratelimited(disk_to_dev(nbd->disk), @@ -1560,6 +1568,7 @@ static int nbd_alloc_and_init_config(struct nbd_device *nbd) static int nbd_open(struct gendisk *disk, blk_mode_t mode) { struct nbd_device *nbd; + struct nbd_config *config; int ret = 0; mutex_lock(&nbd_index_mutex); @@ -1572,7 +1581,9 @@ static int nbd_open(struct gendisk *disk, blk_mode_t mode) ret = -ENXIO; goto out; } - if (!refcount_inc_not_zero(&nbd->config_refs)) { + + config = nbd_get_config_unlocked(nbd); + if (!config) { mutex_lock(&nbd->config_lock); if (refcount_inc_not_zero(&nbd->config_refs)) { mutex_unlock(&nbd->config_lock); @@ -1588,7 +1599,7 @@ static int nbd_open(struct gendisk *disk, blk_mode_t mode) mutex_unlock(&nbd->config_lock); if (max_part) set_bit(GD_NEED_PART_SCAN, &disk->state); - } else if (nbd_disconnected(nbd->config)) { + } else if (nbd_disconnected(config)) { if (max_part) set_bit(GD_NEED_PART_SCAN, &disk->state); } @@ -2205,7 +2216,8 @@ static int nbd_genl_reconfigure(struct sk_buff *skb, struct genl_info *info) } mutex_unlock(&nbd_index_mutex); - if (!refcount_inc_not_zero(&nbd->config_refs)) { + config = nbd_get_config_unlocked(nbd); + if (!config) { dev_err(nbd_to_dev(nbd), "not configured, cannot reconfigure\n"); nbd_put(nbd); @@ -2213,7 +2225,6 @@ static int nbd_genl_reconfigure(struct sk_buff *skb, struct genl_info *info) } mutex_lock(&nbd->config_lock); - config = nbd->config; if (!test_bit(NBD_RT_BOUND, &config->runtime_flags) || !nbd->pid) { dev_err(nbd_to_dev(nbd), -- cgit v1.2.3 From c2da049f419417808466c529999170f5c3ef7d3d Mon Sep 17 00:00:00 2001 From: Li Nan Date: Fri, 17 Nov 2023 00:23:16 +0800 Subject: nbd: fix null-ptr-dereference while accessing 'nbd->config' MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Memory reordering may occur in nbd_genl_connect(), causing config_refs to be set to 1 while nbd->config is still empty. Opening nbd at this time will cause null-ptr-dereference. T1 T2 nbd_open nbd_get_config_unlocked nbd_genl_connect nbd_alloc_and_init_config //memory reordered refcount_set(&nbd->config_refs, 1) // 2 nbd->config ->null point nbd->config = config // 1 Fix it by adding smp barrier to guarantee the execution sequence. Signed-off-by: Li Nan Reviewed-by: Josef Bacik Link: https://lore.kernel.org/r/20231116162316.1740402-4-linan666@huaweicloud.com Signed-off-by: Jens Axboe --- drivers/block/nbd.c | 18 +++++++++++++++++- 1 file changed, 17 insertions(+), 1 deletion(-) diff --git a/drivers/block/nbd.c b/drivers/block/nbd.c index daaf8805e876..3f03cb3dc33c 100644 --- a/drivers/block/nbd.c +++ b/drivers/block/nbd.c @@ -397,8 +397,16 @@ static u32 req_to_nbd_cmd_type(struct request *req) static struct nbd_config *nbd_get_config_unlocked(struct nbd_device *nbd) { - if (refcount_inc_not_zero(&nbd->config_refs)) + if (refcount_inc_not_zero(&nbd->config_refs)) { + /* + * Add smp_mb__after_atomic to ensure that reading nbd->config_refs + * and reading nbd->config is ordered. The pair is the barrier in + * nbd_alloc_and_init_config(), avoid nbd->config_refs is set + * before nbd->config. + */ + smp_mb__after_atomic(); return nbd->config; + } return NULL; } @@ -1559,7 +1567,15 @@ static int nbd_alloc_and_init_config(struct nbd_device *nbd) init_waitqueue_head(&config->conn_wait); config->blksize_bits = NBD_DEF_BLKSIZE_BITS; atomic_set(&config->live_connections, 0); + nbd->config = config; + /* + * Order refcount_set(&nbd->config_refs, 1) and nbd->config assignment, + * its pair is the barrier in nbd_get_config_unlocked(). + * So nbd_get_config_unlocked() won't see nbd->config as null after + * refcount_inc_not_zero() succeed. + */ + smp_mb__before_atomic(); refcount_set(&nbd->config_refs, 1); return 0; -- cgit v1.2.3 From c96b8175522a2c52e297ee0a49827a668f95e1e8 Mon Sep 17 00:00:00 2001 From: Damien Le Moal Date: Mon, 20 Nov 2023 16:06:11 +0900 Subject: block: Remove blk_set_runtime_active() The function blk_set_runtime_active() is called only from blk_post_runtime_resume(), so there is no need for that function to be exported. Open-code this function directly in blk_post_runtime_resume() and remove it. Signed-off-by: Damien Le Moal Reviewed-by: Bart Van Assche Reviewed-by: Johannes Thumshirn Link: https://lore.kernel.org/r/20231120070611.33951-1-dlemoal@kernel.org Signed-off-by: Jens Axboe --- block/blk-pm.c | 33 +++++---------------------------- include/linux/blk-pm.h | 1 - 2 files changed, 5 insertions(+), 29 deletions(-) diff --git a/block/blk-pm.c b/block/blk-pm.c index 6b72b2e03fc8..42e842074715 100644 --- a/block/blk-pm.c +++ b/block/blk-pm.c @@ -163,38 +163,15 @@ EXPORT_SYMBOL(blk_pre_runtime_resume); * @q: the queue of the device * * Description: - * For historical reasons, this routine merely calls blk_set_runtime_active() - * to do the real work of restarting the queue. It does this regardless of - * whether the device's runtime-resume succeeded; even if it failed the + * Restart the queue of a runtime suspended device. It does this regardless + * of whether the device's runtime-resume succeeded; even if it failed the * driver or error handler will need to communicate with the device. * * This function should be called near the end of the device's - * runtime_resume callback. + * runtime_resume callback to correct queue runtime PM status and re-enable + * peeking requests from the queue. */ void blk_post_runtime_resume(struct request_queue *q) -{ - blk_set_runtime_active(q); -} -EXPORT_SYMBOL(blk_post_runtime_resume); - -/** - * blk_set_runtime_active - Force runtime status of the queue to be active - * @q: the queue of the device - * - * If the device is left runtime suspended during system suspend the resume - * hook typically resumes the device and corrects runtime status - * accordingly. However, that does not affect the queue runtime PM status - * which is still "suspended". This prevents processing requests from the - * queue. - * - * This function can be used in driver's resume hook to correct queue - * runtime PM status and re-enable peeking requests from the queue. It - * should be called before first request is added to the queue. - * - * This function is also called by blk_post_runtime_resume() for - * runtime resumes. It does everything necessary to restart the queue. - */ -void blk_set_runtime_active(struct request_queue *q) { int old_status; @@ -211,4 +188,4 @@ void blk_set_runtime_active(struct request_queue *q) if (old_status != RPM_ACTIVE) blk_clear_pm_only(q); } -EXPORT_SYMBOL(blk_set_runtime_active); +EXPORT_SYMBOL(blk_post_runtime_resume); diff --git a/include/linux/blk-pm.h b/include/linux/blk-pm.h index 2580e05a8ab6..004b38a538ff 100644 --- a/include/linux/blk-pm.h +++ b/include/linux/blk-pm.h @@ -15,7 +15,6 @@ extern int blk_pre_runtime_suspend(struct request_queue *q); extern void blk_post_runtime_suspend(struct request_queue *q, int err); extern void blk_pre_runtime_resume(struct request_queue *q); extern void blk_post_runtime_resume(struct request_queue *q); -extern void blk_set_runtime_active(struct request_queue *q); #else static inline void blk_pm_runtime_init(struct request_queue *q, struct device *dev) {} -- cgit v1.2.3 From 616add70bfdc0274a253e84fc78155c27aacde91 Mon Sep 17 00:00:00 2001 From: Mark O'Donovan Date: Wed, 11 Oct 2023 08:45:11 +0000 Subject: nvme-auth: unlock mutex in one place only Signed-off-by: Mark O'Donovan Reviewed-by: Christoph Hellwig Reviewed-by: Sagi Grimberg Reviewed-by: Hannes Reinecke Signed-off-by: Keith Busch --- drivers/nvme/host/auth.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/nvme/host/auth.c b/drivers/nvme/host/auth.c index 48328e36e93b..0f5ea63d3c8d 100644 --- a/drivers/nvme/host/auth.c +++ b/drivers/nvme/host/auth.c @@ -757,12 +757,11 @@ static void nvme_queue_auth_work(struct work_struct *work) __func__, chap->qid); mutex_lock(&ctrl->dhchap_auth_mutex); ret = nvme_auth_dhchap_setup_host_response(ctrl, chap); + mutex_unlock(&ctrl->dhchap_auth_mutex); if (ret) { - mutex_unlock(&ctrl->dhchap_auth_mutex); chap->error = ret; goto fail2; } - mutex_unlock(&ctrl->dhchap_auth_mutex); /* DH-HMAC-CHAP Step 3: send reply */ dev_dbg(ctrl->device, "%s: qid %d send reply\n", -- cgit v1.2.3 From 38ce1570e2c46e7e9af983aa337edd7e43723aa2 Mon Sep 17 00:00:00 2001 From: Mark O'Donovan Date: Wed, 11 Oct 2023 08:45:12 +0000 Subject: nvme-auth: set explanation code for failure2 msgs Some error cases were not setting an auth-failure-reason-code-explanation. This means an AUTH_Failure2 message will be sent with an explanation value of 0 which is a reserved value. Signed-off-by: Mark O'Donovan Reviewed-by: Hannes Reinecke Reviewed-by: Sagi Grimberg Signed-off-by: Keith Busch --- drivers/nvme/host/auth.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/nvme/host/auth.c b/drivers/nvme/host/auth.c index 0f5ea63d3c8d..72c0525c75f5 100644 --- a/drivers/nvme/host/auth.c +++ b/drivers/nvme/host/auth.c @@ -838,6 +838,8 @@ static void nvme_queue_auth_work(struct work_struct *work) } fail2: + if (chap->status == 0) + chap->status = NVME_AUTH_DHCHAP_FAILURE_FAILED; dev_dbg(ctrl->device, "%s: qid %d send failure2, status %x\n", __func__, chap->qid, chap->status); tl = nvme_auth_set_dhchap_failure2_data(ctrl, chap); -- cgit v1.2.3 From 23441536b63677cb2ed9b1637d8ca70315e44bd0 Mon Sep 17 00:00:00 2001 From: Hannes Reinecke Date: Tue, 14 Nov 2023 14:18:21 +0100 Subject: nvme-tcp: only evaluate 'tls' option if TLS is selected We only need to evaluate the 'tls' connect option if TLS is enabled; otherwise we might be getting a link error. Fixes: 706add13676d ("nvme: keyring: fix conditional compilation") Reported-by: kernel test robot Closes: https://lore.kernel.org/r/202311140426.0eHrTXBr-lkp@intel.com/ Signed-off-by: Hannes Reinecke Signed-off-by: Keith Busch --- drivers/nvme/host/tcp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/nvme/host/tcp.c b/drivers/nvme/host/tcp.c index 89661a9cf850..6ed794815517 100644 --- a/drivers/nvme/host/tcp.c +++ b/drivers/nvme/host/tcp.c @@ -1916,7 +1916,7 @@ static int nvme_tcp_alloc_admin_queue(struct nvme_ctrl *ctrl) int ret; key_serial_t pskid = 0; - if (ctrl->opts->tls) { + if (IS_ENABLED(CONFIG_NVME_TCP_TLS) && ctrl->opts->tls) { if (ctrl->opts->tls_key) pskid = key_serial(ctrl->opts->tls_key); else -- cgit v1.2.3 From cd9aed606088d36a7ffff3e808db4e76b1854285 Mon Sep 17 00:00:00 2001 From: Hannes Reinecke Date: Tue, 14 Nov 2023 14:27:01 +0100 Subject: nvme: catch errors from nvme_configure_metadata() nvme_configure_metadata() is issuing I/O, so we might incur an I/O error which will cause the connection to be reset. But in that case any further probing will race with reset and cause UAF errors. So return a status from nvme_configure_metadata() and abort probing if there was an I/O error. Signed-off-by: Hannes Reinecke Signed-off-by: Keith Busch --- drivers/nvme/host/core.c | 19 +++++++++++++------ 1 file changed, 13 insertions(+), 6 deletions(-) diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c index 88b54cdcbd68..fd28e6b6574c 100644 --- a/drivers/nvme/host/core.c +++ b/drivers/nvme/host/core.c @@ -1814,16 +1814,18 @@ set_pi: return ret; } -static void nvme_configure_metadata(struct nvme_ns *ns, struct nvme_id_ns *id) +static int nvme_configure_metadata(struct nvme_ns *ns, struct nvme_id_ns *id) { struct nvme_ctrl *ctrl = ns->ctrl; + int ret; - if (nvme_init_ms(ns, id)) - return; + ret = nvme_init_ms(ns, id); + if (ret) + return ret; ns->features &= ~(NVME_NS_METADATA_SUPPORTED | NVME_NS_EXT_LBAS); if (!ns->ms || !(ctrl->ops->flags & NVME_F_METADATA_SUPPORTED)) - return; + return 0; if (ctrl->ops->flags & NVME_F_FABRICS) { /* @@ -1832,7 +1834,7 @@ static void nvme_configure_metadata(struct nvme_ns *ns, struct nvme_id_ns *id) * remap the separate metadata buffer from the block layer. */ if (WARN_ON_ONCE(!(id->flbas & NVME_NS_FLBAS_META_EXT))) - return; + return 0; ns->features |= NVME_NS_EXT_LBAS; @@ -1859,6 +1861,7 @@ static void nvme_configure_metadata(struct nvme_ns *ns, struct nvme_id_ns *id) else ns->features |= NVME_NS_METADATA_SUPPORTED; } + return 0; } static void nvme_set_queue_limits(struct nvme_ctrl *ctrl, @@ -2032,7 +2035,11 @@ static int nvme_update_ns_info_block(struct nvme_ns *ns, ns->lba_shift = id->lbaf[lbaf].ds; nvme_set_queue_limits(ns->ctrl, ns->queue); - nvme_configure_metadata(ns, id); + ret = nvme_configure_metadata(ns, id); + if (ret < 0) { + blk_mq_unfreeze_queue(ns->disk->queue); + goto out; + } nvme_set_chunk_sectors(ns, id); nvme_update_disk_info(ns->disk, ns, id); -- cgit v1.2.3 From c7ca9757bda35ff9ce27ab42f2cb8b84d983e6ad Mon Sep 17 00:00:00 2001 From: Hannes Reinecke Date: Thu, 16 Nov 2023 13:14:35 +0100 Subject: nvme: blank out authentication fabrics options if not configured If the config option NVME_HOST_AUTH is not selected we should not accept the corresponding fabrics options. This allows userspace to detect if NVMe authentication has been enabled for the kernel. Cc: Shin'ichiro Kawasaki Fixes: f50fff73d620 ("nvme: implement In-Band authentication") Signed-off-by: Hannes Reinecke Tested-by: Shin'ichiro Kawasaki Reviewed-by: Daniel Wagner Reviewed-by: Christoph Hellwig Signed-off-by: Keith Busch --- drivers/nvme/host/fabrics.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/nvme/host/fabrics.c b/drivers/nvme/host/fabrics.c index 4673ead69c5f..aa88606a44c4 100644 --- a/drivers/nvme/host/fabrics.c +++ b/drivers/nvme/host/fabrics.c @@ -667,8 +667,10 @@ static const match_table_t opt_tokens = { #endif { NVMF_OPT_FAIL_FAST_TMO, "fast_io_fail_tmo=%d" }, { NVMF_OPT_DISCOVERY, "discovery" }, +#ifdef CONFIG_NVME_HOST_AUTH { NVMF_OPT_DHCHAP_SECRET, "dhchap_secret=%s" }, { NVMF_OPT_DHCHAP_CTRL_SECRET, "dhchap_ctrl_secret=%s" }, +#endif #ifdef CONFIG_NVME_TCP_TLS { NVMF_OPT_TLS, "tls" }, #endif -- cgit v1.2.3 From 1c22e0295a5eb571c27b53c7371f95699ef705ff Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Fri, 17 Nov 2023 08:13:36 -0500 Subject: nvmet: nul-terminate the NQNs passed in the connect command The host and subsystem NQNs are passed in the connect command payload and interpreted as nul-terminated strings. Ensure they actually are nul-terminated before using them. Fixes: a07b4970f464 "nvmet: add a generic NVMe target") Reported-by: Alon Zahavi Reviewed-by: Chaitanya Kulkarni Signed-off-by: Christoph Hellwig Signed-off-by: Keith Busch --- drivers/nvme/target/fabrics-cmd.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/nvme/target/fabrics-cmd.c b/drivers/nvme/target/fabrics-cmd.c index 43b5bd8bb6a5..d8da840a1c0e 100644 --- a/drivers/nvme/target/fabrics-cmd.c +++ b/drivers/nvme/target/fabrics-cmd.c @@ -244,6 +244,8 @@ static void nvmet_execute_admin_connect(struct nvmet_req *req) goto out; } + d->subsysnqn[NVMF_NQN_FIELD_LEN - 1] = '\0'; + d->hostnqn[NVMF_NQN_FIELD_LEN - 1] = '\0'; status = nvmet_alloc_ctrl(d->subsysnqn, d->hostnqn, req, le32_to_cpu(c->kato), &ctrl); if (status) @@ -313,6 +315,8 @@ static void nvmet_execute_io_connect(struct nvmet_req *req) goto out; } + d->subsysnqn[NVMF_NQN_FIELD_LEN - 1] = '\0'; + d->hostnqn[NVMF_NQN_FIELD_LEN - 1] = '\0'; ctrl = nvmet_ctrl_find_get(d->subsysnqn, d->hostnqn, le16_to_cpu(d->cntlid), req); if (!ctrl) { -- cgit v1.2.3 From 11b9d0b4999705105d1fb7f0e8ac969e0f41b1b8 Mon Sep 17 00:00:00 2001 From: Hannes Reinecke Date: Fri, 20 Oct 2023 07:06:06 +0200 Subject: nvmet-tcp: always initialize tls_handshake_tmo_work The TLS handshake timeout work item should always be initialized to avoid a crash when cancelling the workqueue. Fixes: 675b453e0241 ("nvmet-tcp: enable TLS handshake upcall") Suggested-by: Maurizio Lombardi Signed-off-by: Hannes Reinecke Tested-by: Shin'ichiro Kawasaki Tested-by: Yi Zhang Reviewed-by: Sagi Grimberg Signed-off-by: Keith Busch --- drivers/nvme/target/tcp.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/nvme/target/tcp.c b/drivers/nvme/target/tcp.c index 92b74d0b8686..4cc27856aa8f 100644 --- a/drivers/nvme/target/tcp.c +++ b/drivers/nvme/target/tcp.c @@ -1854,6 +1854,8 @@ static int nvmet_tcp_tls_handshake(struct nvmet_tcp_queue *queue) } return ret; } +#else +static void nvmet_tcp_tls_handshake_timeout(struct work_struct *w) {} #endif static void nvmet_tcp_alloc_queue(struct nvmet_tcp_port *port, @@ -1911,9 +1913,9 @@ static void nvmet_tcp_alloc_queue(struct nvmet_tcp_port *port, list_add_tail(&queue->queue_list, &nvmet_tcp_queue_list); mutex_unlock(&nvmet_tcp_queue_mutex); -#ifdef CONFIG_NVME_TARGET_TCP_TLS INIT_DELAYED_WORK(&queue->tls_handshake_tmo_work, nvmet_tcp_tls_handshake_timeout); +#ifdef CONFIG_NVME_TARGET_TCP_TLS if (queue->state == NVMET_TCP_Q_TLS_HANDSHAKE) { struct sock *sk = queue->sock->sk; -- cgit v1.2.3 From 53f2bca2609237f910531f2c1a7779b16ce7952d Mon Sep 17 00:00:00 2001 From: Chengming Zhou Date: Mon, 20 Nov 2023 03:25:21 +0000 Subject: block/null_blk: Fix double blk_mq_start_request() warning When CONFIG_BLK_DEV_NULL_BLK_FAULT_INJECTION is enabled, null_queue_rq() would return BLK_STS_RESOURCE or BLK_STS_DEV_RESOURCE for the request, which has been marked as MQ_RQ_IN_FLIGHT by blk_mq_start_request(). Then null_queue_rqs() put these requests in the rqlist, return back to the block layer core, which would try to queue them individually again, so the warning in blk_mq_start_request() triggered. Fix it by splitting the null_queue_rq() into two parts: the first is the preparation of request, the second is the handling of request. We put the blk_mq_start_request() after the preparation part, which may fail and return back to the block layer core. The throttling also belongs to the preparation part, so move it before blk_mq_start_request(). And change the return type of null_handle_cmd() to void, since it always return BLK_STS_OK now. Reported-by: Closes: https://lore.kernel.org/all/0000000000000e6aac06098aee0c@google.com/ Fixes: d78bfa1346ab ("block/null_blk: add queue_rqs() support") Suggested-by: Bart Van Assche Signed-off-by: Chengming Zhou Link: https://lore.kernel.org/r/20231120032521.1012037-1-chengming.zhou@linux.dev Signed-off-by: Jens Axboe --- drivers/block/null_blk/main.c | 25 +++++++++++++------------ 1 file changed, 13 insertions(+), 12 deletions(-) diff --git a/drivers/block/null_blk/main.c b/drivers/block/null_blk/main.c index 22a3cf7f32e2..3021d58ca51c 100644 --- a/drivers/block/null_blk/main.c +++ b/drivers/block/null_blk/main.c @@ -1464,19 +1464,13 @@ blk_status_t null_process_cmd(struct nullb_cmd *cmd, enum req_op op, return BLK_STS_OK; } -static blk_status_t null_handle_cmd(struct nullb_cmd *cmd, sector_t sector, - sector_t nr_sectors, enum req_op op) +static void null_handle_cmd(struct nullb_cmd *cmd, sector_t sector, + sector_t nr_sectors, enum req_op op) { struct nullb_device *dev = cmd->nq->dev; struct nullb *nullb = dev->nullb; blk_status_t sts; - if (test_bit(NULLB_DEV_FL_THROTTLED, &dev->flags)) { - sts = null_handle_throttled(cmd); - if (sts != BLK_STS_OK) - return sts; - } - if (op == REQ_OP_FLUSH) { cmd->error = errno_to_blk_status(null_handle_flush(nullb)); goto out; @@ -1493,7 +1487,6 @@ static blk_status_t null_handle_cmd(struct nullb_cmd *cmd, sector_t sector, out: nullb_complete_cmd(cmd); - return BLK_STS_OK; } static enum hrtimer_restart nullb_bwtimer_fn(struct hrtimer *timer) @@ -1724,8 +1717,6 @@ static blk_status_t null_queue_rq(struct blk_mq_hw_ctx *hctx, cmd->fake_timeout = should_timeout_request(rq) || blk_should_fake_timeout(rq->q); - blk_mq_start_request(rq); - if (should_requeue_request(rq)) { /* * Alternate between hitting the core BUSY path, and the @@ -1738,6 +1729,15 @@ static blk_status_t null_queue_rq(struct blk_mq_hw_ctx *hctx, return BLK_STS_OK; } + if (test_bit(NULLB_DEV_FL_THROTTLED, &nq->dev->flags)) { + blk_status_t sts = null_handle_throttled(cmd); + + if (sts != BLK_STS_OK) + return sts; + } + + blk_mq_start_request(rq); + if (is_poll) { spin_lock(&nq->poll_lock); list_add_tail(&rq->queuelist, &nq->poll_list); @@ -1747,7 +1747,8 @@ static blk_status_t null_queue_rq(struct blk_mq_hw_ctx *hctx, if (cmd->fake_timeout) return BLK_STS_OK; - return null_handle_cmd(cmd, sector, nr_sectors, req_op(rq)); + null_handle_cmd(cmd, sector, nr_sectors, req_op(rq)); + return BLK_STS_OK; } static void null_queue_rqs(struct request **rqlist) -- cgit v1.2.3 From 79e0c5be8c73a674c92bd4ba77b75f4f8c91d32e Mon Sep 17 00:00:00 2001 From: Daniel Borkmann Date: Tue, 14 Nov 2023 01:42:13 +0100 Subject: net, vrf: Move dstats structure to core Just move struct pcpu_dstats out of the vrf into the core, and streamline the field names slightly, so they better align with the {t,l}stats ones. No functional change otherwise. A conversion of the u64s to u64_stats_t could be done at a separate point in future. This move is needed as we are moving the {t,l,d}stats allocation/freeing to the core. Signed-off-by: Daniel Borkmann Reviewed-by: Nikolay Aleksandrov Cc: Jakub Kicinski Cc: David Ahern Link: https://lore.kernel.org/r/20231114004220.6495-2-daniel@iogearbox.net Signed-off-by: Martin KaFai Lau --- drivers/net/vrf.c | 24 +++++++----------------- include/linux/netdevice.h | 10 ++++++++++ 2 files changed, 17 insertions(+), 17 deletions(-) diff --git a/drivers/net/vrf.c b/drivers/net/vrf.c index db766941b78f..3e6e0fdc3ba7 100644 --- a/drivers/net/vrf.c +++ b/drivers/net/vrf.c @@ -121,22 +121,12 @@ struct net_vrf { int ifindex; }; -struct pcpu_dstats { - u64 tx_pkts; - u64 tx_bytes; - u64 tx_drps; - u64 rx_pkts; - u64 rx_bytes; - u64 rx_drps; - struct u64_stats_sync syncp; -}; - static void vrf_rx_stats(struct net_device *dev, int len) { struct pcpu_dstats *dstats = this_cpu_ptr(dev->dstats); u64_stats_update_begin(&dstats->syncp); - dstats->rx_pkts++; + dstats->rx_packets++; dstats->rx_bytes += len; u64_stats_update_end(&dstats->syncp); } @@ -161,10 +151,10 @@ static void vrf_get_stats64(struct net_device *dev, do { start = u64_stats_fetch_begin(&dstats->syncp); tbytes = dstats->tx_bytes; - tpkts = dstats->tx_pkts; - tdrops = dstats->tx_drps; + tpkts = dstats->tx_packets; + tdrops = dstats->tx_drops; rbytes = dstats->rx_bytes; - rpkts = dstats->rx_pkts; + rpkts = dstats->rx_packets; } while (u64_stats_fetch_retry(&dstats->syncp, start)); stats->tx_bytes += tbytes; stats->tx_packets += tpkts; @@ -421,7 +411,7 @@ static int vrf_local_xmit(struct sk_buff *skb, struct net_device *dev, if (likely(__netif_rx(skb) == NET_RX_SUCCESS)) vrf_rx_stats(dev, len); else - this_cpu_inc(dev->dstats->rx_drps); + this_cpu_inc(dev->dstats->rx_drops); return NETDEV_TX_OK; } @@ -616,11 +606,11 @@ static netdev_tx_t vrf_xmit(struct sk_buff *skb, struct net_device *dev) struct pcpu_dstats *dstats = this_cpu_ptr(dev->dstats); u64_stats_update_begin(&dstats->syncp); - dstats->tx_pkts++; + dstats->tx_packets++; dstats->tx_bytes += len; u64_stats_update_end(&dstats->syncp); } else { - this_cpu_inc(dev->dstats->tx_drps); + this_cpu_inc(dev->dstats->tx_drops); } return ret; diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index a16c9cc063fe..98082113156e 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -2755,6 +2755,16 @@ struct pcpu_sw_netstats { struct u64_stats_sync syncp; } __aligned(4 * sizeof(u64)); +struct pcpu_dstats { + u64 rx_packets; + u64 rx_bytes; + u64 rx_drops; + u64 tx_packets; + u64 tx_bytes; + u64 tx_drops; + struct u64_stats_sync syncp; +} __aligned(8 * sizeof(u64)); + struct pcpu_lstats { u64_stats_t packets; u64_stats_t bytes; -- cgit v1.2.3 From 34d21de99cea9cb17967874313e5b0262527833c Mon Sep 17 00:00:00 2001 From: Daniel Borkmann Date: Tue, 14 Nov 2023 01:42:14 +0100 Subject: net: Move {l,t,d}stats allocation to core and convert veth & vrf Move {l,t,d}stats allocation to the core and let netdevs pick the stats type they need. That way the driver doesn't have to bother with error handling (allocation failure checking, making sure free happens in the right spot, etc) - all happening in the core. Co-developed-by: Jakub Kicinski Signed-off-by: Jakub Kicinski Signed-off-by: Daniel Borkmann Reviewed-by: Nikolay Aleksandrov Cc: David Ahern Link: https://lore.kernel.org/r/20231114004220.6495-3-daniel@iogearbox.net Signed-off-by: Martin KaFai Lau --- drivers/net/veth.c | 16 ++-------------- drivers/net/vrf.c | 14 +++----------- include/linux/netdevice.h | 20 +++++++++++++++---- net/core/dev.c | 49 ++++++++++++++++++++++++++++++++++++++++++++++- 4 files changed, 69 insertions(+), 30 deletions(-) diff --git a/drivers/net/veth.c b/drivers/net/veth.c index 9980517ed8b0..ac030c241d1a 100644 --- a/drivers/net/veth.c +++ b/drivers/net/veth.c @@ -1506,25 +1506,12 @@ static void veth_free_queues(struct net_device *dev) static int veth_dev_init(struct net_device *dev) { - int err; - - dev->lstats = netdev_alloc_pcpu_stats(struct pcpu_lstats); - if (!dev->lstats) - return -ENOMEM; - - err = veth_alloc_queues(dev); - if (err) { - free_percpu(dev->lstats); - return err; - } - - return 0; + return veth_alloc_queues(dev); } static void veth_dev_free(struct net_device *dev) { veth_free_queues(dev); - free_percpu(dev->lstats); } #ifdef CONFIG_NET_POLL_CONTROLLER @@ -1796,6 +1783,7 @@ static void veth_setup(struct net_device *dev) NETIF_F_HW_VLAN_STAG_RX); dev->needs_free_netdev = true; dev->priv_destructor = veth_dev_free; + dev->pcpu_stat_type = NETDEV_PCPU_STAT_LSTATS; dev->max_mtu = ETH_MAX_MTU; dev->hw_features = VETH_FEATURES; diff --git a/drivers/net/vrf.c b/drivers/net/vrf.c index 3e6e0fdc3ba7..bb95ce43cd97 100644 --- a/drivers/net/vrf.c +++ b/drivers/net/vrf.c @@ -1164,22 +1164,15 @@ static void vrf_dev_uninit(struct net_device *dev) vrf_rtable_release(dev, vrf); vrf_rt6_release(dev, vrf); - - free_percpu(dev->dstats); - dev->dstats = NULL; } static int vrf_dev_init(struct net_device *dev) { struct net_vrf *vrf = netdev_priv(dev); - dev->dstats = netdev_alloc_pcpu_stats(struct pcpu_dstats); - if (!dev->dstats) - goto out_nomem; - /* create the default dst which points back to us */ if (vrf_rtable_create(dev) != 0) - goto out_stats; + goto out_nomem; if (vrf_rt6_create(dev) != 0) goto out_rth; @@ -1193,9 +1186,6 @@ static int vrf_dev_init(struct net_device *dev) out_rth: vrf_rtable_release(dev, vrf); -out_stats: - free_percpu(dev->dstats); - dev->dstats = NULL; out_nomem: return -ENOMEM; } @@ -1694,6 +1684,8 @@ static void vrf_setup(struct net_device *dev) dev->min_mtu = IPV6_MIN_MTU; dev->max_mtu = IP6_MAX_MTU; dev->mtu = dev->max_mtu; + + dev->pcpu_stat_type = NETDEV_PCPU_STAT_DSTATS; } static int vrf_validate(struct nlattr *tb[], struct nlattr *data[], diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index 98082113156e..2564e209465e 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -1797,6 +1797,13 @@ enum netdev_ml_priv_type { ML_PRIV_CAN, }; +enum netdev_stat_type { + NETDEV_PCPU_STAT_NONE, + NETDEV_PCPU_STAT_LSTATS, /* struct pcpu_lstats */ + NETDEV_PCPU_STAT_TSTATS, /* struct pcpu_sw_netstats */ + NETDEV_PCPU_STAT_DSTATS, /* struct pcpu_dstats */ +}; + /** * struct net_device - The DEVICE structure. * @@ -1991,10 +1998,14 @@ enum netdev_ml_priv_type { * * @ml_priv: Mid-layer private * @ml_priv_type: Mid-layer private type - * @lstats: Loopback statistics - * @tstats: Tunnel statistics - * @dstats: Dummy statistics - * @vstats: Virtual ethernet statistics + * + * @pcpu_stat_type: Type of device statistics which the core should + * allocate/free: none, lstats, tstats, dstats. none + * means the driver is handling statistics allocation/ + * freeing internally. + * @lstats: Loopback statistics: packets, bytes + * @tstats: Tunnel statistics: RX/TX packets, RX/TX bytes + * @dstats: Dummy statistics: RX/TX/drop packets, RX/TX bytes * * @garp_port: GARP * @mrp_port: MRP @@ -2354,6 +2365,7 @@ struct net_device { void *ml_priv; enum netdev_ml_priv_type ml_priv_type; + enum netdev_stat_type pcpu_stat_type:8; union { struct pcpu_lstats __percpu *lstats; struct pcpu_sw_netstats __percpu *tstats; diff --git a/net/core/dev.c b/net/core/dev.c index af53f6d838ce..0cc6e283edba 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -10051,6 +10051,46 @@ void netif_tx_stop_all_queues(struct net_device *dev) } EXPORT_SYMBOL(netif_tx_stop_all_queues); +static int netdev_do_alloc_pcpu_stats(struct net_device *dev) +{ + void __percpu *v; + + switch (dev->pcpu_stat_type) { + case NETDEV_PCPU_STAT_NONE: + return 0; + case NETDEV_PCPU_STAT_LSTATS: + v = dev->lstats = netdev_alloc_pcpu_stats(struct pcpu_lstats); + break; + case NETDEV_PCPU_STAT_TSTATS: + v = dev->tstats = netdev_alloc_pcpu_stats(struct pcpu_sw_netstats); + break; + case NETDEV_PCPU_STAT_DSTATS: + v = dev->dstats = netdev_alloc_pcpu_stats(struct pcpu_dstats); + break; + default: + return -EINVAL; + } + + return v ? 0 : -ENOMEM; +} + +static void netdev_do_free_pcpu_stats(struct net_device *dev) +{ + switch (dev->pcpu_stat_type) { + case NETDEV_PCPU_STAT_NONE: + return; + case NETDEV_PCPU_STAT_LSTATS: + free_percpu(dev->lstats); + break; + case NETDEV_PCPU_STAT_TSTATS: + free_percpu(dev->tstats); + break; + case NETDEV_PCPU_STAT_DSTATS: + free_percpu(dev->dstats); + break; + } +} + /** * register_netdevice() - register a network device * @dev: device to register @@ -10111,9 +10151,13 @@ int register_netdevice(struct net_device *dev) goto err_uninit; } + ret = netdev_do_alloc_pcpu_stats(dev); + if (ret) + goto err_uninit; + ret = dev_index_reserve(net, dev->ifindex); if (ret < 0) - goto err_uninit; + goto err_free_pcpu; dev->ifindex = ret; /* Transfer changeable features to wanted_features and enable @@ -10219,6 +10263,8 @@ err_uninit_notify: call_netdevice_notifiers(NETDEV_PRE_UNINIT, dev); err_ifindex_release: dev_index_release(net, dev->ifindex); +err_free_pcpu: + netdev_do_free_pcpu_stats(dev); err_uninit: if (dev->netdev_ops->ndo_uninit) dev->netdev_ops->ndo_uninit(dev); @@ -10471,6 +10517,7 @@ void netdev_run_todo(void) WARN_ON(rcu_access_pointer(dev->ip_ptr)); WARN_ON(rcu_access_pointer(dev->ip6_ptr)); + netdev_do_free_pcpu_stats(dev); if (dev->priv_destructor) dev->priv_destructor(dev); if (dev->needs_free_netdev) -- cgit v1.2.3 From ae1658272c6491a31ac968e39882fc569f312ac3 Mon Sep 17 00:00:00 2001 From: Daniel Borkmann Date: Tue, 14 Nov 2023 01:42:15 +0100 Subject: netkit: Add tstats per-CPU traffic counters Add dev->tstats traffic accounting to netkit. The latter contains per-CPU RX and TX counters. The dev's TX counters are bumped upon pass/unspec as well as redirect verdicts, in other words, on everything except for drops. The dev's RX counters are bumped upon successful __netif_rx(), as well as from skb_do_redirect() (not part of this commit here). Using dev->lstats with having just a single packets/bytes counter and inferring one another's RX counters from the peer dev's lstats is not possible given skb_do_redirect() can also bump the device's stats. Signed-off-by: Daniel Borkmann Acked-by: Nikolay Aleksandrov Link: https://lore.kernel.org/r/20231114004220.6495-4-daniel@iogearbox.net Signed-off-by: Martin KaFai Lau --- drivers/net/netkit.c | 19 ++++++++++++++++++- 1 file changed, 18 insertions(+), 1 deletion(-) diff --git a/drivers/net/netkit.c b/drivers/net/netkit.c index 5a0f86f38f09..99de11f9cde5 100644 --- a/drivers/net/netkit.c +++ b/drivers/net/netkit.c @@ -68,6 +68,7 @@ static netdev_tx_t netkit_xmit(struct sk_buff *skb, struct net_device *dev) netdev_tx_t ret_dev = NET_XMIT_SUCCESS; const struct bpf_mprog_entry *entry; struct net_device *peer; + int len = skb->len; rcu_read_lock(); peer = rcu_dereference(nk->peer); @@ -85,15 +86,22 @@ static netdev_tx_t netkit_xmit(struct sk_buff *skb, struct net_device *dev) case NETKIT_PASS: skb->protocol = eth_type_trans(skb, skb->dev); skb_postpull_rcsum(skb, eth_hdr(skb), ETH_HLEN); - __netif_rx(skb); + if (likely(__netif_rx(skb) == NET_RX_SUCCESS)) { + dev_sw_netstats_tx_add(dev, 1, len); + dev_sw_netstats_rx_add(peer, len); + } else { + goto drop_stats; + } break; case NETKIT_REDIRECT: + dev_sw_netstats_tx_add(dev, 1, len); skb_do_redirect(skb); break; case NETKIT_DROP: default: drop: kfree_skb(skb); +drop_stats: dev_core_stats_tx_dropped_inc(dev); ret_dev = NET_XMIT_DROP; break; @@ -174,6 +182,13 @@ static struct net_device *netkit_peer_dev(struct net_device *dev) return rcu_dereference(netkit_priv(dev)->peer); } +static void netkit_get_stats(struct net_device *dev, + struct rtnl_link_stats64 *stats) +{ + dev_fetch_sw_netstats(stats, dev->tstats); + stats->tx_dropped = DEV_STATS_READ(dev, tx_dropped); +} + static void netkit_uninit(struct net_device *dev); static const struct net_device_ops netkit_netdev_ops = { @@ -184,6 +199,7 @@ static const struct net_device_ops netkit_netdev_ops = { .ndo_set_rx_headroom = netkit_set_headroom, .ndo_get_iflink = netkit_get_iflink, .ndo_get_peer_dev = netkit_peer_dev, + .ndo_get_stats64 = netkit_get_stats, .ndo_uninit = netkit_uninit, .ndo_features_check = passthru_features_check, }; @@ -218,6 +234,7 @@ static void netkit_setup(struct net_device *dev) ether_setup(dev); dev->max_mtu = ETH_MAX_MTU; + dev->pcpu_stat_type = NETDEV_PCPU_STAT_TSTATS; dev->flags |= IFF_NOARP; dev->priv_flags &= ~IFF_TX_SKB_SHARING; -- cgit v1.2.3 From 6f2684bf2b4460c84d0d34612a939f78b96b03fc Mon Sep 17 00:00:00 2001 From: Peilin Ye Date: Tue, 14 Nov 2023 01:42:16 +0100 Subject: veth: Use tstats per-CPU traffic counters Currently veth devices use the lstats per-CPU traffic counters, which only cover TX traffic. veth_get_stats64() actually populates RX stats of a veth device from its peer's TX counters, based on the assumption that a veth device can _only_ receive packets from its peer, which is no longer true: For example, recent CNIs (like Cilium) can use the bpf_redirect_peer() BPF helper to redirect traffic from NIC's tc ingress to veth's tc ingress (in a different netns), skipping veth's peer device. Unfortunately, this kind of traffic isn't currently accounted for in veth's RX stats. In preparation for the fix, use tstats (instead of lstats) to maintain both RX and TX counters for each veth device. We'll use RX counters for bpf_redirect_peer() traffic, and keep using TX counters for the usual "peer-to-peer" traffic. In veth_get_stats64(), calculate RX stats by _adding_ RX count to peer's TX count, in order to cover both kinds of traffic. veth_stats_rx() might need a name change (perhaps to "veth_stats_xdp()") for less confusion, but let's leave it to another patch to keep the fix minimal. Signed-off-by: Peilin Ye Co-developed-by: Daniel Borkmann Signed-off-by: Daniel Borkmann Reviewed-by: Nikolay Aleksandrov Link: https://lore.kernel.org/r/20231114004220.6495-5-daniel@iogearbox.net Signed-off-by: Martin KaFai Lau --- drivers/net/veth.c | 30 +++++++++++------------------- 1 file changed, 11 insertions(+), 19 deletions(-) diff --git a/drivers/net/veth.c b/drivers/net/veth.c index ac030c241d1a..6cc352296c67 100644 --- a/drivers/net/veth.c +++ b/drivers/net/veth.c @@ -373,7 +373,7 @@ static netdev_tx_t veth_xmit(struct sk_buff *skb, struct net_device *dev) skb_tx_timestamp(skb); if (likely(veth_forward_skb(rcv, skb, rq, use_napi) == NET_RX_SUCCESS)) { if (!use_napi) - dev_lstats_add(dev, length); + dev_sw_netstats_tx_add(dev, 1, length); else __veth_xdp_flush(rq); } else { @@ -387,14 +387,6 @@ drop: return ret; } -static u64 veth_stats_tx(struct net_device *dev, u64 *packets, u64 *bytes) -{ - struct veth_priv *priv = netdev_priv(dev); - - dev_lstats_read(dev, packets, bytes); - return atomic64_read(&priv->dropped); -} - static void veth_stats_rx(struct veth_stats *result, struct net_device *dev) { struct veth_priv *priv = netdev_priv(dev); @@ -432,24 +424,24 @@ static void veth_get_stats64(struct net_device *dev, struct veth_priv *priv = netdev_priv(dev); struct net_device *peer; struct veth_stats rx; - u64 packets, bytes; - tot->tx_dropped = veth_stats_tx(dev, &packets, &bytes); - tot->tx_bytes = bytes; - tot->tx_packets = packets; + tot->tx_dropped = atomic64_read(&priv->dropped); + dev_fetch_sw_netstats(tot, dev->tstats); veth_stats_rx(&rx, dev); tot->tx_dropped += rx.xdp_tx_err; tot->rx_dropped = rx.rx_drops + rx.peer_tq_xdp_xmit_err; - tot->rx_bytes = rx.xdp_bytes; - tot->rx_packets = rx.xdp_packets; + tot->rx_bytes += rx.xdp_bytes; + tot->rx_packets += rx.xdp_packets; rcu_read_lock(); peer = rcu_dereference(priv->peer); if (peer) { - veth_stats_tx(peer, &packets, &bytes); - tot->rx_bytes += bytes; - tot->rx_packets += packets; + struct rtnl_link_stats64 tot_peer = {}; + + dev_fetch_sw_netstats(&tot_peer, peer->tstats); + tot->rx_bytes += tot_peer.tx_bytes; + tot->rx_packets += tot_peer.tx_packets; veth_stats_rx(&rx, peer); tot->tx_dropped += rx.peer_tq_xdp_xmit_err; @@ -1783,7 +1775,7 @@ static void veth_setup(struct net_device *dev) NETIF_F_HW_VLAN_STAG_RX); dev->needs_free_netdev = true; dev->priv_destructor = veth_dev_free; - dev->pcpu_stat_type = NETDEV_PCPU_STAT_LSTATS; + dev->pcpu_stat_type = NETDEV_PCPU_STAT_TSTATS; dev->max_mtu = ETH_MAX_MTU; dev->hw_features = VETH_FEATURES; -- cgit v1.2.3 From 024ee930cb3c9ae49e4266aee89cfde0ebb407e1 Mon Sep 17 00:00:00 2001 From: Peilin Ye Date: Tue, 14 Nov 2023 01:42:17 +0100 Subject: bpf: Fix dev's rx stats for bpf_redirect_peer traffic Traffic redirected by bpf_redirect_peer() (used by recent CNIs like Cilium) is not accounted for in the RX stats of supported devices (that is, veth and netkit), confusing user space metrics collectors such as cAdvisor [0], as reported by Youlun. Fix it by calling dev_sw_netstats_rx_add() in skb_do_redirect(), to update RX traffic counters. Devices that support ndo_get_peer_dev _must_ use the @tstats per-CPU counters (instead of @lstats, or @dstats). To make this more fool-proof, error out when ndo_get_peer_dev is set but @tstats are not selected. [0] Specifically, the "container_network_receive_{byte,packet}s_total" counters are affected. Fixes: 9aa1206e8f48 ("bpf: Add redirect_peer helper") Reported-by: Youlun Zhang Signed-off-by: Peilin Ye Co-developed-by: Daniel Borkmann Signed-off-by: Daniel Borkmann Reviewed-by: Nikolay Aleksandrov Link: https://lore.kernel.org/r/20231114004220.6495-6-daniel@iogearbox.net Signed-off-by: Martin KaFai Lau --- net/core/dev.c | 8 ++++++++ net/core/filter.c | 1 + 2 files changed, 9 insertions(+) diff --git a/net/core/dev.c b/net/core/dev.c index 0cc6e283edba..c879246be48d 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -10055,6 +10055,14 @@ static int netdev_do_alloc_pcpu_stats(struct net_device *dev) { void __percpu *v; + /* Drivers implementing ndo_get_peer_dev must support tstat + * accounting, so that skb_do_redirect() can bump the dev's + * RX stats upon network namespace switch. + */ + if (dev->netdev_ops->ndo_get_peer_dev && + dev->pcpu_stat_type != NETDEV_PCPU_STAT_TSTATS) + return -EOPNOTSUPP; + switch (dev->pcpu_stat_type) { case NETDEV_PCPU_STAT_NONE: return 0; diff --git a/net/core/filter.c b/net/core/filter.c index 383f96b0a1c7..cca810987c8d 100644 --- a/net/core/filter.c +++ b/net/core/filter.c @@ -2492,6 +2492,7 @@ int skb_do_redirect(struct sk_buff *skb) net_eq(net, dev_net(dev)))) goto out_drop; skb->dev = dev; + dev_sw_netstats_rx_add(dev, skb->len); return -EAGAIN; } return flags & BPF_F_NEIGH ? -- cgit v1.2.3 From 2c225425704078282e152ba692649237f78b3d7a Mon Sep 17 00:00:00 2001 From: Daniel Borkmann Date: Tue, 14 Nov 2023 01:42:18 +0100 Subject: bpf, netkit: Add indirect call wrapper for fetching peer dev ndo_get_peer_dev is used in tcx BPF fast path, therefore make use of indirect call wrapper and therefore optimize the bpf_redirect_peer() internal handling a bit. Add a small skb_get_peer_dev() wrapper which utilizes the INDIRECT_CALL_1() macro instead of open coding. Future work could potentially add a peer pointer directly into struct net_device in future and convert veth and netkit over to use it so that eventually ndo_get_peer_dev can be removed. Co-developed-by: Nikolay Aleksandrov Signed-off-by: Nikolay Aleksandrov Signed-off-by: Daniel Borkmann Acked-by: Stanislav Fomichev Link: https://lore.kernel.org/r/20231114004220.6495-7-daniel@iogearbox.net Signed-off-by: Martin KaFai Lau --- drivers/net/netkit.c | 3 ++- include/net/netkit.h | 6 ++++++ net/core/filter.c | 18 +++++++++++++----- 3 files changed, 21 insertions(+), 6 deletions(-) diff --git a/drivers/net/netkit.c b/drivers/net/netkit.c index 99de11f9cde5..97bd6705c241 100644 --- a/drivers/net/netkit.c +++ b/drivers/net/netkit.c @@ -7,6 +7,7 @@ #include #include #include +#include #include #include @@ -177,7 +178,7 @@ out: rcu_read_unlock(); } -static struct net_device *netkit_peer_dev(struct net_device *dev) +INDIRECT_CALLABLE_SCOPE struct net_device *netkit_peer_dev(struct net_device *dev) { return rcu_dereference(netkit_priv(dev)->peer); } diff --git a/include/net/netkit.h b/include/net/netkit.h index 0ba2e6b847ca..9ec0163739f4 100644 --- a/include/net/netkit.h +++ b/include/net/netkit.h @@ -10,6 +10,7 @@ int netkit_prog_attach(const union bpf_attr *attr, struct bpf_prog *prog); int netkit_link_attach(const union bpf_attr *attr, struct bpf_prog *prog); int netkit_prog_detach(const union bpf_attr *attr, struct bpf_prog *prog); int netkit_prog_query(const union bpf_attr *attr, union bpf_attr __user *uattr); +INDIRECT_CALLABLE_DECLARE(struct net_device *netkit_peer_dev(struct net_device *dev)); #else static inline int netkit_prog_attach(const union bpf_attr *attr, struct bpf_prog *prog) @@ -34,5 +35,10 @@ static inline int netkit_prog_query(const union bpf_attr *attr, { return -EINVAL; } + +static inline struct net_device *netkit_peer_dev(struct net_device *dev) +{ + return NULL; +} #endif /* CONFIG_NETKIT */ #endif /* __NET_NETKIT_H */ diff --git a/net/core/filter.c b/net/core/filter.c index cca810987c8d..7e4d7c3bcc84 100644 --- a/net/core/filter.c +++ b/net/core/filter.c @@ -81,6 +81,7 @@ #include #include #include +#include #include #include "dev.h" @@ -2468,6 +2469,16 @@ static const struct bpf_func_proto bpf_clone_redirect_proto = { DEFINE_PER_CPU(struct bpf_redirect_info, bpf_redirect_info); EXPORT_PER_CPU_SYMBOL_GPL(bpf_redirect_info); +static struct net_device *skb_get_peer_dev(struct net_device *dev) +{ + const struct net_device_ops *ops = dev->netdev_ops; + + if (likely(ops->ndo_get_peer_dev)) + return INDIRECT_CALL_1(ops->ndo_get_peer_dev, + netkit_peer_dev, dev); + return NULL; +} + int skb_do_redirect(struct sk_buff *skb) { struct bpf_redirect_info *ri = this_cpu_ptr(&bpf_redirect_info); @@ -2481,12 +2492,9 @@ int skb_do_redirect(struct sk_buff *skb) if (unlikely(!dev)) goto out_drop; if (flags & BPF_F_PEER) { - const struct net_device_ops *ops = dev->netdev_ops; - - if (unlikely(!ops->ndo_get_peer_dev || - !skb_at_tc_ingress(skb))) + if (unlikely(!skb_at_tc_ingress(skb))) goto out_drop; - dev = ops->ndo_get_peer_dev(dev); + dev = skb_get_peer_dev(dev); if (unlikely(!dev || !(dev->flags & IFF_UP) || net_eq(net, dev_net(dev)))) -- cgit v1.2.3 From eee82da79f036bb49ff80d3088b9530e3c2e57eb Mon Sep 17 00:00:00 2001 From: Daniel Borkmann Date: Tue, 14 Nov 2023 01:42:19 +0100 Subject: selftests/bpf: De-veth-ize the tc_redirect test case No functional changes to the test case, but just renaming various functions, variables, etc, to remove veth part of their name for making it more generic and reusable later on (e.g. for netkit). Signed-off-by: Daniel Borkmann Acked-by: Stanislav Fomichev Reviewed-by: Nikolay Aleksandrov Link: https://lore.kernel.org/r/20231114004220.6495-8-daniel@iogearbox.net Signed-off-by: Martin KaFai Lau --- .../testing/selftests/bpf/prog_tests/tc_redirect.c | 263 +++++++++++---------- 1 file changed, 137 insertions(+), 126 deletions(-) diff --git a/tools/testing/selftests/bpf/prog_tests/tc_redirect.c b/tools/testing/selftests/bpf/prog_tests/tc_redirect.c index 6ee22c3b251a..407ff4e9bc78 100644 --- a/tools/testing/selftests/bpf/prog_tests/tc_redirect.c +++ b/tools/testing/selftests/bpf/prog_tests/tc_redirect.c @@ -110,11 +110,16 @@ static void netns_setup_namespaces_nofail(const char *verb) } } +enum dev_mode { + MODE_VETH, +}; + struct netns_setup_result { - int ifindex_veth_src; - int ifindex_veth_src_fwd; - int ifindex_veth_dst; - int ifindex_veth_dst_fwd; + enum dev_mode dev_mode; + int ifindex_src; + int ifindex_src_fwd; + int ifindex_dst; + int ifindex_dst_fwd; }; static int get_ifaddr(const char *name, char *ifaddr) @@ -140,55 +145,59 @@ static int get_ifaddr(const char *name, char *ifaddr) static int netns_setup_links_and_routes(struct netns_setup_result *result) { struct nstoken *nstoken = NULL; - char veth_src_fwd_addr[IFADDR_STR_LEN+1] = {}; + char src_fwd_addr[IFADDR_STR_LEN+1] = {}; - SYS(fail, "ip link add veth_src type veth peer name veth_src_fwd"); - SYS(fail, "ip link add veth_dst type veth peer name veth_dst_fwd"); + if (result->dev_mode == MODE_VETH) { + SYS(fail, "ip link add src type veth peer name src_fwd"); + SYS(fail, "ip link add dst type veth peer name dst_fwd"); - SYS(fail, "ip link set veth_dst_fwd address " MAC_DST_FWD); - SYS(fail, "ip link set veth_dst address " MAC_DST); + SYS(fail, "ip link set dst_fwd address " MAC_DST_FWD); + SYS(fail, "ip link set dst address " MAC_DST); + } - if (get_ifaddr("veth_src_fwd", veth_src_fwd_addr)) + if (get_ifaddr("src_fwd", src_fwd_addr)) goto fail; - result->ifindex_veth_src = if_nametoindex("veth_src"); - if (!ASSERT_GT(result->ifindex_veth_src, 0, "ifindex_veth_src")) + result->ifindex_src = if_nametoindex("src"); + if (!ASSERT_GT(result->ifindex_src, 0, "ifindex_src")) goto fail; - result->ifindex_veth_src_fwd = if_nametoindex("veth_src_fwd"); - if (!ASSERT_GT(result->ifindex_veth_src_fwd, 0, "ifindex_veth_src_fwd")) + result->ifindex_src_fwd = if_nametoindex("src_fwd"); + if (!ASSERT_GT(result->ifindex_src_fwd, 0, "ifindex_src_fwd")) goto fail; - result->ifindex_veth_dst = if_nametoindex("veth_dst"); - if (!ASSERT_GT(result->ifindex_veth_dst, 0, "ifindex_veth_dst")) + result->ifindex_dst = if_nametoindex("dst"); + if (!ASSERT_GT(result->ifindex_dst, 0, "ifindex_dst")) goto fail; - result->ifindex_veth_dst_fwd = if_nametoindex("veth_dst_fwd"); - if (!ASSERT_GT(result->ifindex_veth_dst_fwd, 0, "ifindex_veth_dst_fwd")) + result->ifindex_dst_fwd = if_nametoindex("dst_fwd"); + if (!ASSERT_GT(result->ifindex_dst_fwd, 0, "ifindex_dst_fwd")) goto fail; - SYS(fail, "ip link set veth_src netns " NS_SRC); - SYS(fail, "ip link set veth_src_fwd netns " NS_FWD); - SYS(fail, "ip link set veth_dst_fwd netns " NS_FWD); - SYS(fail, "ip link set veth_dst netns " NS_DST); + SYS(fail, "ip link set src netns " NS_SRC); + SYS(fail, "ip link set src_fwd netns " NS_FWD); + SYS(fail, "ip link set dst_fwd netns " NS_FWD); + SYS(fail, "ip link set dst netns " NS_DST); /** setup in 'src' namespace */ nstoken = open_netns(NS_SRC); if (!ASSERT_OK_PTR(nstoken, "setns src")) goto fail; - SYS(fail, "ip addr add " IP4_SRC "/32 dev veth_src"); - SYS(fail, "ip addr add " IP6_SRC "/128 dev veth_src nodad"); - SYS(fail, "ip link set dev veth_src up"); + SYS(fail, "ip addr add " IP4_SRC "/32 dev src"); + SYS(fail, "ip addr add " IP6_SRC "/128 dev src nodad"); + SYS(fail, "ip link set dev src up"); - SYS(fail, "ip route add " IP4_DST "/32 dev veth_src scope global"); - SYS(fail, "ip route add " IP4_NET "/16 dev veth_src scope global"); - SYS(fail, "ip route add " IP6_DST "/128 dev veth_src scope global"); + SYS(fail, "ip route add " IP4_DST "/32 dev src scope global"); + SYS(fail, "ip route add " IP4_NET "/16 dev src scope global"); + SYS(fail, "ip route add " IP6_DST "/128 dev src scope global"); - SYS(fail, "ip neigh add " IP4_DST " dev veth_src lladdr %s", - veth_src_fwd_addr); - SYS(fail, "ip neigh add " IP6_DST " dev veth_src lladdr %s", - veth_src_fwd_addr); + if (result->dev_mode == MODE_VETH) { + SYS(fail, "ip neigh add " IP4_DST " dev src lladdr %s", + src_fwd_addr); + SYS(fail, "ip neigh add " IP6_DST " dev src lladdr %s", + src_fwd_addr); + } close_netns(nstoken); @@ -201,15 +210,15 @@ static int netns_setup_links_and_routes(struct netns_setup_result *result) * needs v4 one in order to start ARP probing. IP4_NET route is added * to the endpoints so that the ARP processing will reply. */ - SYS(fail, "ip addr add " IP4_SLL "/32 dev veth_src_fwd"); - SYS(fail, "ip addr add " IP4_DLL "/32 dev veth_dst_fwd"); - SYS(fail, "ip link set dev veth_src_fwd up"); - SYS(fail, "ip link set dev veth_dst_fwd up"); + SYS(fail, "ip addr add " IP4_SLL "/32 dev src_fwd"); + SYS(fail, "ip addr add " IP4_DLL "/32 dev dst_fwd"); + SYS(fail, "ip link set dev src_fwd up"); + SYS(fail, "ip link set dev dst_fwd up"); - SYS(fail, "ip route add " IP4_SRC "/32 dev veth_src_fwd scope global"); - SYS(fail, "ip route add " IP6_SRC "/128 dev veth_src_fwd scope global"); - SYS(fail, "ip route add " IP4_DST "/32 dev veth_dst_fwd scope global"); - SYS(fail, "ip route add " IP6_DST "/128 dev veth_dst_fwd scope global"); + SYS(fail, "ip route add " IP4_SRC "/32 dev src_fwd scope global"); + SYS(fail, "ip route add " IP6_SRC "/128 dev src_fwd scope global"); + SYS(fail, "ip route add " IP4_DST "/32 dev dst_fwd scope global"); + SYS(fail, "ip route add " IP6_DST "/128 dev dst_fwd scope global"); close_netns(nstoken); @@ -218,16 +227,18 @@ static int netns_setup_links_and_routes(struct netns_setup_result *result) if (!ASSERT_OK_PTR(nstoken, "setns dst")) goto fail; - SYS(fail, "ip addr add " IP4_DST "/32 dev veth_dst"); - SYS(fail, "ip addr add " IP6_DST "/128 dev veth_dst nodad"); - SYS(fail, "ip link set dev veth_dst up"); + SYS(fail, "ip addr add " IP4_DST "/32 dev dst"); + SYS(fail, "ip addr add " IP6_DST "/128 dev dst nodad"); + SYS(fail, "ip link set dev dst up"); - SYS(fail, "ip route add " IP4_SRC "/32 dev veth_dst scope global"); - SYS(fail, "ip route add " IP4_NET "/16 dev veth_dst scope global"); - SYS(fail, "ip route add " IP6_SRC "/128 dev veth_dst scope global"); + SYS(fail, "ip route add " IP4_SRC "/32 dev dst scope global"); + SYS(fail, "ip route add " IP4_NET "/16 dev dst scope global"); + SYS(fail, "ip route add " IP6_SRC "/128 dev dst scope global"); - SYS(fail, "ip neigh add " IP4_SRC " dev veth_dst lladdr " MAC_DST_FWD); - SYS(fail, "ip neigh add " IP6_SRC " dev veth_dst lladdr " MAC_DST_FWD); + if (result->dev_mode == MODE_VETH) { + SYS(fail, "ip neigh add " IP4_SRC " dev dst lladdr " MAC_DST_FWD); + SYS(fail, "ip neigh add " IP6_SRC " dev dst lladdr " MAC_DST_FWD); + } close_netns(nstoken); @@ -293,23 +304,23 @@ static int netns_load_bpf(const struct bpf_program *src_prog, const struct bpf_program *chk_prog, const struct netns_setup_result *setup_result) { - LIBBPF_OPTS(bpf_tc_hook, qdisc_veth_src_fwd); - LIBBPF_OPTS(bpf_tc_hook, qdisc_veth_dst_fwd); + LIBBPF_OPTS(bpf_tc_hook, qdisc_src_fwd); + LIBBPF_OPTS(bpf_tc_hook, qdisc_dst_fwd); int err; - /* tc qdisc add dev veth_src_fwd clsact */ - QDISC_CLSACT_CREATE(&qdisc_veth_src_fwd, setup_result->ifindex_veth_src_fwd); - /* tc filter add dev veth_src_fwd ingress bpf da src_prog */ - XGRESS_FILTER_ADD(&qdisc_veth_src_fwd, BPF_TC_INGRESS, src_prog, 0); - /* tc filter add dev veth_src_fwd egress bpf da chk_prog */ - XGRESS_FILTER_ADD(&qdisc_veth_src_fwd, BPF_TC_EGRESS, chk_prog, 0); + /* tc qdisc add dev src_fwd clsact */ + QDISC_CLSACT_CREATE(&qdisc_src_fwd, setup_result->ifindex_src_fwd); + /* tc filter add dev src_fwd ingress bpf da src_prog */ + XGRESS_FILTER_ADD(&qdisc_src_fwd, BPF_TC_INGRESS, src_prog, 0); + /* tc filter add dev src_fwd egress bpf da chk_prog */ + XGRESS_FILTER_ADD(&qdisc_src_fwd, BPF_TC_EGRESS, chk_prog, 0); - /* tc qdisc add dev veth_dst_fwd clsact */ - QDISC_CLSACT_CREATE(&qdisc_veth_dst_fwd, setup_result->ifindex_veth_dst_fwd); - /* tc filter add dev veth_dst_fwd ingress bpf da dst_prog */ - XGRESS_FILTER_ADD(&qdisc_veth_dst_fwd, BPF_TC_INGRESS, dst_prog, 0); - /* tc filter add dev veth_dst_fwd egress bpf da chk_prog */ - XGRESS_FILTER_ADD(&qdisc_veth_dst_fwd, BPF_TC_EGRESS, chk_prog, 0); + /* tc qdisc add dev dst_fwd clsact */ + QDISC_CLSACT_CREATE(&qdisc_dst_fwd, setup_result->ifindex_dst_fwd); + /* tc filter add dev dst_fwd ingress bpf da dst_prog */ + XGRESS_FILTER_ADD(&qdisc_dst_fwd, BPF_TC_INGRESS, dst_prog, 0); + /* tc filter add dev dst_fwd egress bpf da chk_prog */ + XGRESS_FILTER_ADD(&qdisc_dst_fwd, BPF_TC_EGRESS, chk_prog, 0); return 0; fail: @@ -539,10 +550,10 @@ done: static int netns_load_dtime_bpf(struct test_tc_dtime *skel, const struct netns_setup_result *setup_result) { - LIBBPF_OPTS(bpf_tc_hook, qdisc_veth_src_fwd); - LIBBPF_OPTS(bpf_tc_hook, qdisc_veth_dst_fwd); - LIBBPF_OPTS(bpf_tc_hook, qdisc_veth_src); - LIBBPF_OPTS(bpf_tc_hook, qdisc_veth_dst); + LIBBPF_OPTS(bpf_tc_hook, qdisc_src_fwd); + LIBBPF_OPTS(bpf_tc_hook, qdisc_dst_fwd); + LIBBPF_OPTS(bpf_tc_hook, qdisc_src); + LIBBPF_OPTS(bpf_tc_hook, qdisc_dst); struct nstoken *nstoken; int err; @@ -550,58 +561,58 @@ static int netns_load_dtime_bpf(struct test_tc_dtime *skel, nstoken = open_netns(NS_SRC); if (!ASSERT_OK_PTR(nstoken, "setns " NS_SRC)) return -1; - /* tc qdisc add dev veth_src clsact */ - QDISC_CLSACT_CREATE(&qdisc_veth_src, setup_result->ifindex_veth_src); - /* tc filter add dev veth_src ingress bpf da ingress_host */ - XGRESS_FILTER_ADD(&qdisc_veth_src, BPF_TC_INGRESS, skel->progs.ingress_host, 0); - /* tc filter add dev veth_src egress bpf da egress_host */ - XGRESS_FILTER_ADD(&qdisc_veth_src, BPF_TC_EGRESS, skel->progs.egress_host, 0); + /* tc qdisc add dev src clsact */ + QDISC_CLSACT_CREATE(&qdisc_src, setup_result->ifindex_src); + /* tc filter add dev src ingress bpf da ingress_host */ + XGRESS_FILTER_ADD(&qdisc_src, BPF_TC_INGRESS, skel->progs.ingress_host, 0); + /* tc filter add dev src egress bpf da egress_host */ + XGRESS_FILTER_ADD(&qdisc_src, BPF_TC_EGRESS, skel->progs.egress_host, 0); close_netns(nstoken); /* setup ns_dst tc progs */ nstoken = open_netns(NS_DST); if (!ASSERT_OK_PTR(nstoken, "setns " NS_DST)) return -1; - /* tc qdisc add dev veth_dst clsact */ - QDISC_CLSACT_CREATE(&qdisc_veth_dst, setup_result->ifindex_veth_dst); - /* tc filter add dev veth_dst ingress bpf da ingress_host */ - XGRESS_FILTER_ADD(&qdisc_veth_dst, BPF_TC_INGRESS, skel->progs.ingress_host, 0); - /* tc filter add dev veth_dst egress bpf da egress_host */ - XGRESS_FILTER_ADD(&qdisc_veth_dst, BPF_TC_EGRESS, skel->progs.egress_host, 0); + /* tc qdisc add dev dst clsact */ + QDISC_CLSACT_CREATE(&qdisc_dst, setup_result->ifindex_dst); + /* tc filter add dev dst ingress bpf da ingress_host */ + XGRESS_FILTER_ADD(&qdisc_dst, BPF_TC_INGRESS, skel->progs.ingress_host, 0); + /* tc filter add dev dst egress bpf da egress_host */ + XGRESS_FILTER_ADD(&qdisc_dst, BPF_TC_EGRESS, skel->progs.egress_host, 0); close_netns(nstoken); /* setup ns_fwd tc progs */ nstoken = open_netns(NS_FWD); if (!ASSERT_OK_PTR(nstoken, "setns " NS_FWD)) return -1; - /* tc qdisc add dev veth_dst_fwd clsact */ - QDISC_CLSACT_CREATE(&qdisc_veth_dst_fwd, setup_result->ifindex_veth_dst_fwd); - /* tc filter add dev veth_dst_fwd ingress prio 100 bpf da ingress_fwdns_prio100 */ - XGRESS_FILTER_ADD(&qdisc_veth_dst_fwd, BPF_TC_INGRESS, + /* tc qdisc add dev dst_fwd clsact */ + QDISC_CLSACT_CREATE(&qdisc_dst_fwd, setup_result->ifindex_dst_fwd); + /* tc filter add dev dst_fwd ingress prio 100 bpf da ingress_fwdns_prio100 */ + XGRESS_FILTER_ADD(&qdisc_dst_fwd, BPF_TC_INGRESS, skel->progs.ingress_fwdns_prio100, 100); - /* tc filter add dev veth_dst_fwd ingress prio 101 bpf da ingress_fwdns_prio101 */ - XGRESS_FILTER_ADD(&qdisc_veth_dst_fwd, BPF_TC_INGRESS, + /* tc filter add dev dst_fwd ingress prio 101 bpf da ingress_fwdns_prio101 */ + XGRESS_FILTER_ADD(&qdisc_dst_fwd, BPF_TC_INGRESS, skel->progs.ingress_fwdns_prio101, 101); - /* tc filter add dev veth_dst_fwd egress prio 100 bpf da egress_fwdns_prio100 */ - XGRESS_FILTER_ADD(&qdisc_veth_dst_fwd, BPF_TC_EGRESS, + /* tc filter add dev dst_fwd egress prio 100 bpf da egress_fwdns_prio100 */ + XGRESS_FILTER_ADD(&qdisc_dst_fwd, BPF_TC_EGRESS, skel->progs.egress_fwdns_prio100, 100); - /* tc filter add dev veth_dst_fwd egress prio 101 bpf da egress_fwdns_prio101 */ - XGRESS_FILTER_ADD(&qdisc_veth_dst_fwd, BPF_TC_EGRESS, + /* tc filter add dev dst_fwd egress prio 101 bpf da egress_fwdns_prio101 */ + XGRESS_FILTER_ADD(&qdisc_dst_fwd, BPF_TC_EGRESS, skel->progs.egress_fwdns_prio101, 101); - /* tc qdisc add dev veth_src_fwd clsact */ - QDISC_CLSACT_CREATE(&qdisc_veth_src_fwd, setup_result->ifindex_veth_src_fwd); - /* tc filter add dev veth_src_fwd ingress prio 100 bpf da ingress_fwdns_prio100 */ - XGRESS_FILTER_ADD(&qdisc_veth_src_fwd, BPF_TC_INGRESS, + /* tc qdisc add dev src_fwd clsact */ + QDISC_CLSACT_CREATE(&qdisc_src_fwd, setup_result->ifindex_src_fwd); + /* tc filter add dev src_fwd ingress prio 100 bpf da ingress_fwdns_prio100 */ + XGRESS_FILTER_ADD(&qdisc_src_fwd, BPF_TC_INGRESS, skel->progs.ingress_fwdns_prio100, 100); - /* tc filter add dev veth_src_fwd ingress prio 101 bpf da ingress_fwdns_prio101 */ - XGRESS_FILTER_ADD(&qdisc_veth_src_fwd, BPF_TC_INGRESS, + /* tc filter add dev src_fwd ingress prio 101 bpf da ingress_fwdns_prio101 */ + XGRESS_FILTER_ADD(&qdisc_src_fwd, BPF_TC_INGRESS, skel->progs.ingress_fwdns_prio101, 101); - /* tc filter add dev veth_src_fwd egress prio 100 bpf da egress_fwdns_prio100 */ - XGRESS_FILTER_ADD(&qdisc_veth_src_fwd, BPF_TC_EGRESS, + /* tc filter add dev src_fwd egress prio 100 bpf da egress_fwdns_prio100 */ + XGRESS_FILTER_ADD(&qdisc_src_fwd, BPF_TC_EGRESS, skel->progs.egress_fwdns_prio100, 100); - /* tc filter add dev veth_src_fwd egress prio 101 bpf da egress_fwdns_prio101 */ - XGRESS_FILTER_ADD(&qdisc_veth_src_fwd, BPF_TC_EGRESS, + /* tc filter add dev src_fwd egress prio 101 bpf da egress_fwdns_prio101 */ + XGRESS_FILTER_ADD(&qdisc_src_fwd, BPF_TC_EGRESS, skel->progs.egress_fwdns_prio101, 101); close_netns(nstoken); return 0; @@ -777,8 +788,8 @@ static void test_tc_redirect_dtime(struct netns_setup_result *setup_result) if (!ASSERT_OK_PTR(skel, "test_tc_dtime__open")) return; - skel->rodata->IFINDEX_SRC = setup_result->ifindex_veth_src_fwd; - skel->rodata->IFINDEX_DST = setup_result->ifindex_veth_dst_fwd; + skel->rodata->IFINDEX_SRC = setup_result->ifindex_src_fwd; + skel->rodata->IFINDEX_DST = setup_result->ifindex_dst_fwd; err = test_tc_dtime__load(skel); if (!ASSERT_OK(err, "test_tc_dtime__load")) @@ -868,8 +879,8 @@ static void test_tc_redirect_neigh(struct netns_setup_result *setup_result) if (!ASSERT_OK_PTR(skel, "test_tc_neigh__open")) goto done; - skel->rodata->IFINDEX_SRC = setup_result->ifindex_veth_src_fwd; - skel->rodata->IFINDEX_DST = setup_result->ifindex_veth_dst_fwd; + skel->rodata->IFINDEX_SRC = setup_result->ifindex_src_fwd; + skel->rodata->IFINDEX_DST = setup_result->ifindex_dst_fwd; err = test_tc_neigh__load(skel); if (!ASSERT_OK(err, "test_tc_neigh__load")) @@ -904,8 +915,8 @@ static void test_tc_redirect_peer(struct netns_setup_result *setup_result) if (!ASSERT_OK_PTR(skel, "test_tc_peer__open")) goto done; - skel->rodata->IFINDEX_SRC = setup_result->ifindex_veth_src_fwd; - skel->rodata->IFINDEX_DST = setup_result->ifindex_veth_dst_fwd; + skel->rodata->IFINDEX_SRC = setup_result->ifindex_src_fwd; + skel->rodata->IFINDEX_DST = setup_result->ifindex_dst_fwd; err = test_tc_peer__load(skel); if (!ASSERT_OK(err, "test_tc_peer__load")) @@ -996,7 +1007,7 @@ static int tun_relay_loop(int src_fd, int target_fd) static void test_tc_redirect_peer_l3(struct netns_setup_result *setup_result) { LIBBPF_OPTS(bpf_tc_hook, qdisc_tun_fwd); - LIBBPF_OPTS(bpf_tc_hook, qdisc_veth_dst_fwd); + LIBBPF_OPTS(bpf_tc_hook, qdisc_dst_fwd); struct test_tc_peer *skel = NULL; struct nstoken *nstoken = NULL; int err; @@ -1045,7 +1056,7 @@ static void test_tc_redirect_peer_l3(struct netns_setup_result *setup_result) goto fail; skel->rodata->IFINDEX_SRC = ifindex; - skel->rodata->IFINDEX_DST = setup_result->ifindex_veth_dst_fwd; + skel->rodata->IFINDEX_DST = setup_result->ifindex_dst_fwd; err = test_tc_peer__load(skel); if (!ASSERT_OK(err, "test_tc_peer__load")) @@ -1053,19 +1064,19 @@ static void test_tc_redirect_peer_l3(struct netns_setup_result *setup_result) /* Load "tc_src_l3" to the tun_fwd interface to redirect packets * towards dst, and "tc_dst" to redirect packets - * and "tc_chk" on veth_dst_fwd to drop non-redirected packets. + * and "tc_chk" on dst_fwd to drop non-redirected packets. */ /* tc qdisc add dev tun_fwd clsact */ QDISC_CLSACT_CREATE(&qdisc_tun_fwd, ifindex); /* tc filter add dev tun_fwd ingress bpf da tc_src_l3 */ XGRESS_FILTER_ADD(&qdisc_tun_fwd, BPF_TC_INGRESS, skel->progs.tc_src_l3, 0); - /* tc qdisc add dev veth_dst_fwd clsact */ - QDISC_CLSACT_CREATE(&qdisc_veth_dst_fwd, setup_result->ifindex_veth_dst_fwd); - /* tc filter add dev veth_dst_fwd ingress bpf da tc_dst_l3 */ - XGRESS_FILTER_ADD(&qdisc_veth_dst_fwd, BPF_TC_INGRESS, skel->progs.tc_dst_l3, 0); - /* tc filter add dev veth_dst_fwd egress bpf da tc_chk */ - XGRESS_FILTER_ADD(&qdisc_veth_dst_fwd, BPF_TC_EGRESS, skel->progs.tc_chk, 0); + /* tc qdisc add dev dst_fwd clsact */ + QDISC_CLSACT_CREATE(&qdisc_dst_fwd, setup_result->ifindex_dst_fwd); + /* tc filter add dev dst_fwd ingress bpf da tc_dst_l3 */ + XGRESS_FILTER_ADD(&qdisc_dst_fwd, BPF_TC_INGRESS, skel->progs.tc_dst_l3, 0); + /* tc filter add dev dst_fwd egress bpf da tc_chk */ + XGRESS_FILTER_ADD(&qdisc_dst_fwd, BPF_TC_EGRESS, skel->progs.tc_chk, 0); /* Setup route and neigh tables */ SYS(fail, "ip -netns " NS_SRC " addr add dev tun_src " IP4_TUN_SRC "/24"); @@ -1074,17 +1085,17 @@ static void test_tc_redirect_peer_l3(struct netns_setup_result *setup_result) SYS(fail, "ip -netns " NS_SRC " addr add dev tun_src " IP6_TUN_SRC "/64 nodad"); SYS(fail, "ip -netns " NS_FWD " addr add dev tun_fwd " IP6_TUN_FWD "/64 nodad"); - SYS(fail, "ip -netns " NS_SRC " route del " IP4_DST "/32 dev veth_src scope global"); + SYS(fail, "ip -netns " NS_SRC " route del " IP4_DST "/32 dev src scope global"); SYS(fail, "ip -netns " NS_SRC " route add " IP4_DST "/32 via " IP4_TUN_FWD " dev tun_src scope global"); - SYS(fail, "ip -netns " NS_DST " route add " IP4_TUN_SRC "/32 dev veth_dst scope global"); - SYS(fail, "ip -netns " NS_SRC " route del " IP6_DST "/128 dev veth_src scope global"); + SYS(fail, "ip -netns " NS_DST " route add " IP4_TUN_SRC "/32 dev dst scope global"); + SYS(fail, "ip -netns " NS_SRC " route del " IP6_DST "/128 dev src scope global"); SYS(fail, "ip -netns " NS_SRC " route add " IP6_DST "/128 via " IP6_TUN_FWD " dev tun_src scope global"); - SYS(fail, "ip -netns " NS_DST " route add " IP6_TUN_SRC "/128 dev veth_dst scope global"); + SYS(fail, "ip -netns " NS_DST " route add " IP6_TUN_SRC "/128 dev dst scope global"); - SYS(fail, "ip -netns " NS_DST " neigh add " IP4_TUN_SRC " dev veth_dst lladdr " MAC_DST_FWD); - SYS(fail, "ip -netns " NS_DST " neigh add " IP6_TUN_SRC " dev veth_dst lladdr " MAC_DST_FWD); + SYS(fail, "ip -netns " NS_DST " neigh add " IP4_TUN_SRC " dev dst lladdr " MAC_DST_FWD); + SYS(fail, "ip -netns " NS_DST " neigh add " IP6_TUN_SRC " dev dst lladdr " MAC_DST_FWD); if (!ASSERT_OK(set_forwarding(false), "disable forwarding")) goto fail; @@ -1106,9 +1117,9 @@ fail: close_netns(nstoken); } -#define RUN_TEST(name) \ +#define RUN_TEST(name, mode) \ ({ \ - struct netns_setup_result setup_result; \ + struct netns_setup_result setup_result = { .dev_mode = mode, }; \ if (test__start_subtest(#name)) \ if (ASSERT_OK(netns_setup_namespaces("add"), "setup namespaces")) { \ if (ASSERT_OK(netns_setup_links_and_routes(&setup_result), \ @@ -1122,11 +1133,11 @@ static void *test_tc_redirect_run_tests(void *arg) { netns_setup_namespaces_nofail("delete"); - RUN_TEST(tc_redirect_peer); - RUN_TEST(tc_redirect_peer_l3); - RUN_TEST(tc_redirect_neigh); - RUN_TEST(tc_redirect_neigh_fib); - RUN_TEST(tc_redirect_dtime); + RUN_TEST(tc_redirect_peer, MODE_VETH); + RUN_TEST(tc_redirect_peer_l3, MODE_VETH); + RUN_TEST(tc_redirect_neigh, MODE_VETH); + RUN_TEST(tc_redirect_neigh_fib, MODE_VETH); + RUN_TEST(tc_redirect_dtime, MODE_VETH); return NULL; } -- cgit v1.2.3 From adfeae2d243d9e5b83d094af481d189156b11779 Mon Sep 17 00:00:00 2001 From: Daniel Borkmann Date: Tue, 14 Nov 2023 01:42:20 +0100 Subject: selftests/bpf: Add netkit to tc_redirect selftest Extend the existing tc_redirect selftest to also cover netkit devices for exercising the bpf_redirect_peer() code paths, so that we have both veth as well as netkit covered, all tests still pass after this change. Signed-off-by: Daniel Borkmann Acked-by: Stanislav Fomichev Reviewed-by: Nikolay Aleksandrov Link: https://lore.kernel.org/r/20231114004220.6495-9-daniel@iogearbox.net Signed-off-by: Martin KaFai Lau --- .../testing/selftests/bpf/prog_tests/tc_redirect.c | 52 ++++++++++++++++++++++ 1 file changed, 52 insertions(+) diff --git a/tools/testing/selftests/bpf/prog_tests/tc_redirect.c b/tools/testing/selftests/bpf/prog_tests/tc_redirect.c index 407ff4e9bc78..518f143c5b0f 100644 --- a/tools/testing/selftests/bpf/prog_tests/tc_redirect.c +++ b/tools/testing/selftests/bpf/prog_tests/tc_redirect.c @@ -24,6 +24,7 @@ #include "test_progs.h" #include "network_helpers.h" +#include "netlink_helpers.h" #include "test_tc_neigh_fib.skel.h" #include "test_tc_neigh.skel.h" #include "test_tc_peer.skel.h" @@ -112,6 +113,7 @@ static void netns_setup_namespaces_nofail(const char *verb) enum dev_mode { MODE_VETH, + MODE_NETKIT, }; struct netns_setup_result { @@ -142,10 +144,51 @@ static int get_ifaddr(const char *name, char *ifaddr) return 0; } +static int create_netkit(int mode, char *prim, char *peer) +{ + struct rtattr *linkinfo, *data, *peer_info; + struct rtnl_handle rth = { .fd = -1 }; + const char *type = "netkit"; + struct { + struct nlmsghdr n; + struct ifinfomsg i; + char buf[1024]; + } req = {}; + int err; + + err = rtnl_open(&rth, 0); + if (!ASSERT_OK(err, "open_rtnetlink")) + return err; + + memset(&req, 0, sizeof(req)); + req.n.nlmsg_len = NLMSG_LENGTH(sizeof(struct ifinfomsg)); + req.n.nlmsg_flags = NLM_F_REQUEST | NLM_F_CREATE | NLM_F_EXCL; + req.n.nlmsg_type = RTM_NEWLINK; + req.i.ifi_family = AF_UNSPEC; + + addattr_l(&req.n, sizeof(req), IFLA_IFNAME, prim, strlen(prim)); + linkinfo = addattr_nest(&req.n, sizeof(req), IFLA_LINKINFO); + addattr_l(&req.n, sizeof(req), IFLA_INFO_KIND, type, strlen(type)); + data = addattr_nest(&req.n, sizeof(req), IFLA_INFO_DATA); + addattr32(&req.n, sizeof(req), IFLA_NETKIT_MODE, mode); + peer_info = addattr_nest(&req.n, sizeof(req), IFLA_NETKIT_PEER_INFO); + req.n.nlmsg_len += sizeof(struct ifinfomsg); + addattr_l(&req.n, sizeof(req), IFLA_IFNAME, peer, strlen(peer)); + addattr_nest_end(&req.n, peer_info); + addattr_nest_end(&req.n, data); + addattr_nest_end(&req.n, linkinfo); + + err = rtnl_talk(&rth, &req.n, NULL); + ASSERT_OK(err, "talk_rtnetlink"); + rtnl_close(&rth); + return err; +} + static int netns_setup_links_and_routes(struct netns_setup_result *result) { struct nstoken *nstoken = NULL; char src_fwd_addr[IFADDR_STR_LEN+1] = {}; + int err; if (result->dev_mode == MODE_VETH) { SYS(fail, "ip link add src type veth peer name src_fwd"); @@ -153,6 +196,13 @@ static int netns_setup_links_and_routes(struct netns_setup_result *result) SYS(fail, "ip link set dst_fwd address " MAC_DST_FWD); SYS(fail, "ip link set dst address " MAC_DST); + } else if (result->dev_mode == MODE_NETKIT) { + err = create_netkit(NETKIT_L3, "src", "src_fwd"); + if (!ASSERT_OK(err, "create_ifindex_src")) + goto fail; + err = create_netkit(NETKIT_L3, "dst", "dst_fwd"); + if (!ASSERT_OK(err, "create_ifindex_dst")) + goto fail; } if (get_ifaddr("src_fwd", src_fwd_addr)) @@ -1134,7 +1184,9 @@ static void *test_tc_redirect_run_tests(void *arg) netns_setup_namespaces_nofail("delete"); RUN_TEST(tc_redirect_peer, MODE_VETH); + RUN_TEST(tc_redirect_peer, MODE_NETKIT); RUN_TEST(tc_redirect_peer_l3, MODE_VETH); + RUN_TEST(tc_redirect_peer_l3, MODE_NETKIT); RUN_TEST(tc_redirect_neigh, MODE_VETH); RUN_TEST(tc_redirect_neigh_fib, MODE_VETH); RUN_TEST(tc_redirect_dtime, MODE_VETH); -- cgit v1.2.3 From 5029c5e4f20d8d6b41cefbde4b3eeadaec4662c6 Mon Sep 17 00:00:00 2001 From: Muhammad Muzammil Date: Wed, 25 Oct 2023 15:24:36 +0200 Subject: s390/dasd: resolve spelling mistake resolve typing mistake from pimary to primary Signed-off-by: Muhammad Muzammil Link: https://lore.kernel.org/r/20231010043140.28416-1-m.muzzammilashraf@gmail.com Signed-off-by: Stefan Haberland Link: https://lore.kernel.org/r/20231025132437.1223363-2-sth@linux.ibm.com Signed-off-by: Jens Axboe --- drivers/s390/block/dasd_int.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/s390/block/dasd_int.h b/drivers/s390/block/dasd_int.h index 2e663131adaf..1b1b8a41c4d4 100644 --- a/drivers/s390/block/dasd_int.h +++ b/drivers/s390/block/dasd_int.h @@ -283,7 +283,7 @@ struct dasd_pprc_dev_info { __u8 secondary; /* 7 Secondary device address */ __u16 pprc_id; /* 8-9 Peer-to-Peer Remote Copy ID */ __u8 reserved2[12]; /* 10-21 reserved */ - __u16 prim_cu_ssid; /* 22-23 Pimary Control Unit SSID */ + __u16 prim_cu_ssid; /* 22-23 Primary Control Unit SSID */ __u8 reserved3[12]; /* 24-35 reserved */ __u16 sec_cu_ssid; /* 36-37 Secondary Control Unit SSID */ __u8 reserved4[90]; /* 38-127 reserved */ -- cgit v1.2.3 From db46cd1e0426f52999d50fa72cfa97fa39952885 Mon Sep 17 00:00:00 2001 From: Jan Höppner Date: Wed, 25 Oct 2023 15:24:37 +0200 Subject: s390/dasd: protect device queue against concurrent access MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit In dasd_profile_start() the amount of requests on the device queue are counted. The access to the device queue is unprotected against concurrent access. With a lot of parallel I/O, especially with alias devices enabled, the device queue can change while dasd_profile_start() is accessing the queue. In the worst case this leads to a kernel panic due to incorrect pointer accesses. Fix this by taking the device lock before accessing the queue and counting the requests. Additionally the check for a valid profile data pointer can be done earlier to avoid unnecessary locking in a hot path. Cc: Fixes: 4fa52aa7a82f ("[S390] dasd: add enhanced DASD statistics interface") Reviewed-by: Stefan Haberland Signed-off-by: Jan Höppner Signed-off-by: Stefan Haberland Link: https://lore.kernel.org/r/20231025132437.1223363-3-sth@linux.ibm.com Signed-off-by: Jens Axboe --- drivers/s390/block/dasd.c | 24 +++++++++++++----------- 1 file changed, 13 insertions(+), 11 deletions(-) diff --git a/drivers/s390/block/dasd.c b/drivers/s390/block/dasd.c index d440319a7945..833cfab7d877 100644 --- a/drivers/s390/block/dasd.c +++ b/drivers/s390/block/dasd.c @@ -676,18 +676,20 @@ static void dasd_profile_start(struct dasd_block *block, * we count each request only once. */ device = cqr->startdev; - if (device->profile.data) { - counter = 1; /* request is not yet queued on the start device */ - list_for_each(l, &device->ccw_queue) - if (++counter >= 31) - break; - } + if (!device->profile.data) + return; + + spin_lock(get_ccwdev_lock(device->cdev)); + counter = 1; /* request is not yet queued on the start device */ + list_for_each(l, &device->ccw_queue) + if (++counter >= 31) + break; + spin_unlock(get_ccwdev_lock(device->cdev)); + spin_lock(&device->profile.lock); - if (device->profile.data) { - device->profile.data->dasd_io_nr_req[counter]++; - if (rq_data_dir(req) == READ) - device->profile.data->dasd_read_nr_req[counter]++; - } + device->profile.data->dasd_io_nr_req[counter]++; + if (rq_data_dir(req) == READ) + device->profile.data->dasd_read_nr_req[counter]++; spin_unlock(&device->profile.lock); } -- cgit v1.2.3 From 8e4ece6889a5b1836b6a135827ac831a5350602a Mon Sep 17 00:00:00 2001 From: Kunkun Jiang Date: Mon, 20 Nov 2023 21:12:10 +0800 Subject: KVM: arm64: GICv4: Do not perform a map to a mapped vLPI Before performing a map, let's check whether the vLPI has been mapped. Fixes: 196b136498b3 ("KVM: arm/arm64: GICv4: Wire mapping/unmapping of VLPIs in VFIO irq bypass") Signed-off-by: Kunkun Jiang Acked-by: Marc Zyngier Reviewed-by: Zenghui Yu Link: https://lore.kernel.org/r/20231120131210.2039-1-jiangkunkun@huawei.com Signed-off-by: Oliver Upton --- arch/arm64/kvm/vgic/vgic-v4.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/arm64/kvm/vgic/vgic-v4.c b/arch/arm64/kvm/vgic/vgic-v4.c index 339a55194b2c..74a67ad87f29 100644 --- a/arch/arm64/kvm/vgic/vgic-v4.c +++ b/arch/arm64/kvm/vgic/vgic-v4.c @@ -436,6 +436,10 @@ int kvm_vgic_v4_set_forwarding(struct kvm *kvm, int virq, if (ret) goto out; + /* Silently exit if the vLPI is already mapped */ + if (irq->hw) + goto out; + /* * Emit the mapping request. If it fails, the ITS probably * isn't v4 compatible, so let's silently bail out. Holding -- cgit v1.2.3 From d6fef34ee4d102be448146f24caf96d7b4a05401 Mon Sep 17 00:00:00 2001 From: Keith Busch Date: Mon, 20 Nov 2023 14:18:31 -0800 Subject: io_uring: fix off-by one bvec index If the offset equals the bv_len of the first registered bvec, then the request does not include any of that first bvec. Skip it so that drivers don't have to deal with a zero length bvec, which was observed to break NVMe's PRP list creation. Cc: stable@vger.kernel.org Fixes: bd11b3a391e3 ("io_uring: don't use iov_iter_advance() for fixed buffers") Signed-off-by: Keith Busch Link: https://lore.kernel.org/r/20231120221831.2646460-1-kbusch@meta.com Signed-off-by: Jens Axboe --- io_uring/rsrc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/io_uring/rsrc.c b/io_uring/rsrc.c index 7034be555334..f521c5965a93 100644 --- a/io_uring/rsrc.c +++ b/io_uring/rsrc.c @@ -1258,7 +1258,7 @@ int io_import_fixed(int ddir, struct iov_iter *iter, */ const struct bio_vec *bvec = imu->bvec; - if (offset <= bvec->bv_len) { + if (offset < bvec->bv_len) { /* * Note, huge pages buffers consists of one large * bvec entry and should always go this way. The other -- cgit v1.2.3 From 88903daecacf03b1e5636e1b5f18bda5b07030fc Mon Sep 17 00:00:00 2001 From: "Steven Rostedt (Google)" Date: Mon, 20 Nov 2023 18:51:06 -0500 Subject: eventfs: Remove expectation that ei->is_freed means ei->dentry == NULL The logic to free the eventfs_inode (ei) use to set is_freed and clear the "dentry" field under the eventfs_mutex. But that changed when a race was found where the ei->dentry needed to be cleared when the last dput() was called on it. But there was still logic that checked if ei->dentry was not NULL and is_freed is set, and would warn if it was. But since that situation was changed and the ei->dentry isn't cleared until the last dput() is called on it while the ei->is_freed is set, do not test for that condition anymore, and change the comments to reflect that. Link: https://lkml.kernel.org/r/20231120235154.265826243@goodmis.org Cc: Masami Hiramatsu Cc: Andrew Morton Fixes: 020010fbfa20 ("eventfs: Delete eventfs_inode when the last dentry is freed") Reported-by: Mark Rutland Signed-off-by: Steven Rostedt (Google) --- fs/tracefs/event_inode.c | 22 ++++++++++++---------- 1 file changed, 12 insertions(+), 10 deletions(-) diff --git a/fs/tracefs/event_inode.c b/fs/tracefs/event_inode.c index f8a594a50ae6..f239b2b507a4 100644 --- a/fs/tracefs/event_inode.c +++ b/fs/tracefs/event_inode.c @@ -27,16 +27,16 @@ /* * eventfs_mutex protects the eventfs_inode (ei) dentry. Any access * to the ei->dentry must be done under this mutex and after checking - * if ei->is_freed is not set. The ei->dentry is released under the - * mutex at the same time ei->is_freed is set. If ei->is_freed is set - * then the ei->dentry is invalid. + * if ei->is_freed is not set. When ei->is_freed is set, the dentry + * is on its way to being freed after the last dput() is made on it. */ static DEFINE_MUTEX(eventfs_mutex); /* * The eventfs_inode (ei) itself is protected by SRCU. It is released from * its parent's list and will have is_freed set (under eventfs_mutex). - * After the SRCU grace period is over, the ei may be freed. + * After the SRCU grace period is over and the last dput() is called + * the ei is freed. */ DEFINE_STATIC_SRCU(eventfs_srcu); @@ -365,12 +365,14 @@ create_file_dentry(struct eventfs_inode *ei, int idx, * created the dentry for this e_dentry. In which case * use that one. * - * Note, with the mutex held, the e_dentry cannot have content - * and the ei->is_freed be true at the same time. + * If ei->is_freed is set, the e_dentry is currently on its + * way to being freed, don't return it. If e_dentry is NULL + * it means it was already freed. */ - dentry = *e_dentry; - if (WARN_ON_ONCE(dentry && ei->is_freed)) + if (ei->is_freed) dentry = NULL; + else + dentry = *e_dentry; /* The lookup does not need to up the dentry refcount */ if (dentry && !lookup) dget(dentry); @@ -473,8 +475,8 @@ create_dir_dentry(struct eventfs_inode *pei, struct eventfs_inode *ei, * created the dentry for this e_dentry. In which case * use that one. * - * Note, with the mutex held, the e_dentry cannot have content - * and the ei->is_freed be true at the same time. + * If ei->is_freed is set, the e_dentry is currently on its + * way to being freed. */ dentry = ei->dentry; if (dentry && !lookup) -- cgit v1.2.3 From 71cade82f2b553a74d046c015c986f2df165696f Mon Sep 17 00:00:00 2001 From: "Steven Rostedt (Google)" Date: Mon, 20 Nov 2023 18:51:07 -0500 Subject: eventfs: Do not invalidate dentry in create_file/dir_dentry() With the call to simple_recursive_removal() on the entire eventfs sub system when the directory is removed, it performs the d_invalidate on all the dentries when it is removed. There's no need to do clean ups when a dentry is being created while the directory is being deleted. As dentries are cleaned up by the simpler_recursive_removal(), trying to do d_invalidate() in these functions will cause the dentry to be invalidated twice, and crash the kernel. Link: https://lore.kernel.org/all/20231116123016.140576-1-naresh.kamboju@linaro.org/ Link: https://lkml.kernel.org/r/20231120235154.422970988@goodmis.org Cc: Masami Hiramatsu Cc: Andrew Morton Fixes: 407c6726ca71 ("eventfs: Use simple_recursive_removal() to clean up dentries") Reported-by: Mark Rutland Reported-by: Naresh Kamboju Reported-by: Linux Kernel Functional Testing Signed-off-by: Steven Rostedt (Google) --- fs/tracefs/event_inode.c | 19 ++++++------------- 1 file changed, 6 insertions(+), 13 deletions(-) diff --git a/fs/tracefs/event_inode.c b/fs/tracefs/event_inode.c index f239b2b507a4..3eb6c622a74d 100644 --- a/fs/tracefs/event_inode.c +++ b/fs/tracefs/event_inode.c @@ -326,7 +326,6 @@ create_file_dentry(struct eventfs_inode *ei, int idx, struct eventfs_attr *attr = NULL; struct dentry **e_dentry = &ei->d_children[idx]; struct dentry *dentry; - bool invalidate = false; mutex_lock(&eventfs_mutex); if (ei->is_freed) { @@ -389,17 +388,14 @@ create_file_dentry(struct eventfs_inode *ei, int idx, * Otherwise it means two dentries exist with the same name. */ WARN_ON_ONCE(!ei->is_freed); - invalidate = true; + dentry = NULL; } mutex_unlock(&eventfs_mutex); - if (invalidate) - d_invalidate(dentry); - - if (lookup || invalidate) + if (lookup) dput(dentry); - return invalidate ? NULL : dentry; + return dentry; } /** @@ -439,7 +435,6 @@ static struct dentry * create_dir_dentry(struct eventfs_inode *pei, struct eventfs_inode *ei, struct dentry *parent, bool lookup) { - bool invalidate = false; struct dentry *dentry = NULL; mutex_lock(&eventfs_mutex); @@ -495,16 +490,14 @@ create_dir_dentry(struct eventfs_inode *pei, struct eventfs_inode *ei, * Otherwise it means two dentries exist with the same name. */ WARN_ON_ONCE(!ei->is_freed); - invalidate = true; + dentry = NULL; } mutex_unlock(&eventfs_mutex); - if (invalidate) - d_invalidate(dentry); - if (lookup || invalidate) + if (lookup) dput(dentry); - return invalidate ? NULL : dentry; + return dentry; } /** -- cgit v1.2.3 From 98594181944daa201481ad63242806beb7c89ff4 Mon Sep 17 00:00:00 2001 From: Robin Murphy Date: Thu, 16 Nov 2023 16:52:15 +0000 Subject: iommufd/selftest: Fix _test_mock_dirty_bitmaps() The ASSERT_EQ() macro sneakily expands to two statements, so the loop here needs braces to ensure it captures both and actually terminates the test upon failure. Where these tests are currently failing on my arm64 machine, this reduces the number of logged lines from a rather unreasonable ~197,000 down to 10. While we're at it, we can also clean up the tautologous "count" calculations whose assertions can never fail unless mathematics and/or the C language become fundamentally broken. Fixes: a9af47e382a4 ("iommufd/selftest: Test IOMMU_HWPT_GET_DIRTY_BITMAP") Link: https://lore.kernel.org/r/90e083045243ef407dd592bb1deec89cd1f4ddf2.1700153535.git.robin.murphy@arm.com Signed-off-by: Robin Murphy Reviewed-by: Kevin Tian Reviewed-by: Joao Martins Tested-by: Joao Martins Signed-off-by: Jason Gunthorpe --- tools/testing/selftests/iommu/iommufd_utils.h | 13 ++++++------- 1 file changed, 6 insertions(+), 7 deletions(-) diff --git a/tools/testing/selftests/iommu/iommufd_utils.h b/tools/testing/selftests/iommu/iommufd_utils.h index 050e9751321c..ad9202335656 100644 --- a/tools/testing/selftests/iommu/iommufd_utils.h +++ b/tools/testing/selftests/iommu/iommufd_utils.h @@ -293,15 +293,13 @@ static int _test_mock_dirty_bitmaps(int fd, __u32 hwpt_id, size_t length, __u64 bitmap_size, __u32 flags, struct __test_metadata *_metadata) { - unsigned long i, count, nbits = bitmap_size * BITS_PER_BYTE; + unsigned long i, nbits = bitmap_size * BITS_PER_BYTE; unsigned long nr = nbits / 2; __u64 out_dirty = 0; /* Mark all even bits as dirty in the mock domain */ - for (count = 0, i = 0; i < nbits; count += !(i % 2), i++) - if (!(i % 2)) - set_bit(i, (unsigned long *)bitmap); - ASSERT_EQ(nr, count); + for (i = 0; i < nbits; i += 2) + set_bit(i, (unsigned long *)bitmap); test_cmd_mock_domain_set_dirty(fd, hwpt_id, length, iova, page_size, bitmap, &out_dirty); @@ -311,9 +309,10 @@ static int _test_mock_dirty_bitmaps(int fd, __u32 hwpt_id, size_t length, memset(bitmap, 0, bitmap_size); test_cmd_get_dirty_bitmap(fd, hwpt_id, length, iova, page_size, bitmap, flags); - for (count = 0, i = 0; i < nbits; count += !(i % 2), i++) + /* Beware ASSERT_EQ() is two statements -- braces are not redundant! */ + for (i = 0; i < nbits; i++) { ASSERT_EQ(!(i % 2), test_bit(i, (unsigned long *)bitmap)); - ASSERT_EQ(count, out_dirty); + } memset(bitmap, 0, bitmap_size); test_cmd_get_dirty_bitmap(fd, hwpt_id, length, iova, page_size, bitmap, -- cgit v1.2.3 From 977bc146d4eb7070118d8a974919b33bb52732b4 Mon Sep 17 00:00:00 2001 From: Eduard Zingerman Date: Tue, 21 Nov 2023 04:06:51 +0200 Subject: selftests/bpf: track tcp payload offset as scalar in xdp_synproxy This change prepares syncookie_{tc,xdp} for update in callbakcs verification logic. To allow bpf_loop() verification converge when multiple callback itreations are considered: - track offset inside TCP payload explicitly, not as a part of the pointer; - make sure that offset does not exceed MAX_PACKET_OFF enforced by verifier; - make sure that offset is tracked as unbound scalar between iterations, otherwise verifier won't be able infer that bpf_loop callback reaches identical states. Acked-by: Andrii Nakryiko Signed-off-by: Eduard Zingerman Link: https://lore.kernel.org/r/20231121020701.26440-2-eddyz87@gmail.com Signed-off-by: Alexei Starovoitov --- .../selftests/bpf/progs/xdp_synproxy_kern.c | 84 +++++++++++++--------- 1 file changed, 52 insertions(+), 32 deletions(-) diff --git a/tools/testing/selftests/bpf/progs/xdp_synproxy_kern.c b/tools/testing/selftests/bpf/progs/xdp_synproxy_kern.c index e959336c7a73..80f620602d50 100644 --- a/tools/testing/selftests/bpf/progs/xdp_synproxy_kern.c +++ b/tools/testing/selftests/bpf/progs/xdp_synproxy_kern.c @@ -53,6 +53,8 @@ #define DEFAULT_TTL 64 #define MAX_ALLOWED_PORTS 8 +#define MAX_PACKET_OFF 0xffff + #define swap(a, b) \ do { typeof(a) __tmp = (a); (a) = (b); (b) = __tmp; } while (0) @@ -183,63 +185,76 @@ static __always_inline __u32 tcp_clock_ms(void) } struct tcpopt_context { - __u8 *ptr; - __u8 *end; + void *data; void *data_end; __be32 *tsecr; __u8 wscale; bool option_timestamp; bool option_sack; + __u32 off; }; -static int tscookie_tcpopt_parse(struct tcpopt_context *ctx) +static __always_inline u8 *next(struct tcpopt_context *ctx, __u32 sz) { - __u8 opcode, opsize; + __u64 off = ctx->off; + __u8 *data; - if (ctx->ptr >= ctx->end) - return 1; - if (ctx->ptr >= ctx->data_end) - return 1; + /* Verifier forbids access to packet when offset exceeds MAX_PACKET_OFF */ + if (off > MAX_PACKET_OFF - sz) + return NULL; - opcode = ctx->ptr[0]; + data = ctx->data + off; + barrier_var(data); + if (data + sz >= ctx->data_end) + return NULL; - if (opcode == TCPOPT_EOL) - return 1; - if (opcode == TCPOPT_NOP) { - ++ctx->ptr; - return 0; - } + ctx->off += sz; + return data; +} - if (ctx->ptr + 1 >= ctx->end) - return 1; - if (ctx->ptr + 1 >= ctx->data_end) +static int tscookie_tcpopt_parse(struct tcpopt_context *ctx) +{ + __u8 *opcode, *opsize, *wscale, *tsecr; + __u32 off = ctx->off; + + opcode = next(ctx, 1); + if (!opcode) return 1; - opsize = ctx->ptr[1]; - if (opsize < 2) + + if (*opcode == TCPOPT_EOL) return 1; + if (*opcode == TCPOPT_NOP) + return 0; - if (ctx->ptr + opsize > ctx->end) + opsize = next(ctx, 1); + if (!opsize || *opsize < 2) return 1; - switch (opcode) { + switch (*opcode) { case TCPOPT_WINDOW: - if (opsize == TCPOLEN_WINDOW && ctx->ptr + TCPOLEN_WINDOW <= ctx->data_end) - ctx->wscale = ctx->ptr[2] < TCP_MAX_WSCALE ? ctx->ptr[2] : TCP_MAX_WSCALE; + wscale = next(ctx, 1); + if (!wscale) + return 1; + if (*opsize == TCPOLEN_WINDOW) + ctx->wscale = *wscale < TCP_MAX_WSCALE ? *wscale : TCP_MAX_WSCALE; break; case TCPOPT_TIMESTAMP: - if (opsize == TCPOLEN_TIMESTAMP && ctx->ptr + TCPOLEN_TIMESTAMP <= ctx->data_end) { + tsecr = next(ctx, 4); + if (!tsecr) + return 1; + if (*opsize == TCPOLEN_TIMESTAMP) { ctx->option_timestamp = true; /* Client's tsval becomes our tsecr. */ - *ctx->tsecr = get_unaligned((__be32 *)(ctx->ptr + 2)); + *ctx->tsecr = get_unaligned((__be32 *)tsecr); } break; case TCPOPT_SACK_PERM: - if (opsize == TCPOLEN_SACK_PERM) + if (*opsize == TCPOLEN_SACK_PERM) ctx->option_sack = true; break; } - ctx->ptr += opsize; + ctx->off = off + *opsize; return 0; } @@ -256,16 +271,21 @@ static int tscookie_tcpopt_parse_batch(__u32 index, void *context) static __always_inline bool tscookie_init(struct tcphdr *tcp_header, __u16 tcp_len, __be32 *tsval, - __be32 *tsecr, void *data_end) + __be32 *tsecr, void *data, void *data_end) { struct tcpopt_context loop_ctx = { - .ptr = (__u8 *)(tcp_header + 1), - .end = (__u8 *)tcp_header + tcp_len, + .data = data, .data_end = data_end, .tsecr = tsecr, .wscale = TS_OPT_WSCALE_MASK, .option_timestamp = false, .option_sack = false, + /* Note: currently verifier would track .off as unbound scalar. + * In case if verifier would at some point get smarter and + * compute bounded value for this var, beware that it might + * hinder bpf_loop() convergence validation. + */ + .off = (__u8 *)(tcp_header + 1) - (__u8 *)data, }; u32 cookie; @@ -635,7 +655,7 @@ static __always_inline int syncookie_handle_syn(struct header_pointers *hdr, cookie = (__u32)value; if (tscookie_init((void *)hdr->tcp, hdr->tcp_len, - &tsopt_buf[0], &tsopt_buf[1], data_end)) + &tsopt_buf[0], &tsopt_buf[1], data, data_end)) tsopt = tsopt_buf; /* Check that there is enough space for a SYNACK. It also covers -- cgit v1.2.3 From 87eb0152bcc102ecbda866978f4e54db5a3be1ef Mon Sep 17 00:00:00 2001 From: Eduard Zingerman Date: Tue, 21 Nov 2023 04:06:52 +0200 Subject: selftests/bpf: track string payload offset as scalar in strobemeta This change prepares strobemeta for update in callbacks verification logic. To allow bpf_loop() verification converge when multiple callback iterations are considered: - track offset inside strobemeta_payload->payload directly as scalar value; - at each iteration make sure that remaining strobemeta_payload->payload capacity is sufficient for execution of read_{map,str}_var functions; - make sure that offset is tracked as unbound scalar between iterations, otherwise verifier won't be able infer that bpf_loop callback reaches identical states. Acked-by: Andrii Nakryiko Signed-off-by: Eduard Zingerman Link: https://lore.kernel.org/r/20231121020701.26440-3-eddyz87@gmail.com Signed-off-by: Alexei Starovoitov --- tools/testing/selftests/bpf/progs/strobemeta.h | 78 ++++++++++++++++---------- 1 file changed, 48 insertions(+), 30 deletions(-) diff --git a/tools/testing/selftests/bpf/progs/strobemeta.h b/tools/testing/selftests/bpf/progs/strobemeta.h index e02cfd380746..40df2cc26eaf 100644 --- a/tools/testing/selftests/bpf/progs/strobemeta.h +++ b/tools/testing/selftests/bpf/progs/strobemeta.h @@ -24,9 +24,11 @@ struct task_struct {}; #define STACK_TABLE_EPOCH_SHIFT 20 #define STROBE_MAX_STR_LEN 1 #define STROBE_MAX_CFGS 32 +#define READ_MAP_VAR_PAYLOAD_CAP \ + ((1 + STROBE_MAX_MAP_ENTRIES * 2) * STROBE_MAX_STR_LEN) #define STROBE_MAX_PAYLOAD \ (STROBE_MAX_STRS * STROBE_MAX_STR_LEN + \ - STROBE_MAX_MAPS * (1 + STROBE_MAX_MAP_ENTRIES * 2) * STROBE_MAX_STR_LEN) + STROBE_MAX_MAPS * READ_MAP_VAR_PAYLOAD_CAP) struct strobe_value_header { /* @@ -355,7 +357,7 @@ static __always_inline uint64_t read_str_var(struct strobemeta_cfg *cfg, size_t idx, void *tls_base, struct strobe_value_generic *value, struct strobemeta_payload *data, - void *payload) + size_t off) { void *location; uint64_t len; @@ -366,7 +368,7 @@ static __always_inline uint64_t read_str_var(struct strobemeta_cfg *cfg, return 0; bpf_probe_read_user(value, sizeof(struct strobe_value_generic), location); - len = bpf_probe_read_user_str(payload, STROBE_MAX_STR_LEN, value->ptr); + len = bpf_probe_read_user_str(&data->payload[off], STROBE_MAX_STR_LEN, value->ptr); /* * if bpf_probe_read_user_str returns error (<0), due to casting to * unsinged int, it will become big number, so next check is @@ -378,14 +380,14 @@ static __always_inline uint64_t read_str_var(struct strobemeta_cfg *cfg, return 0; data->str_lens[idx] = len; - return len; + return off + len; } -static __always_inline void *read_map_var(struct strobemeta_cfg *cfg, - size_t idx, void *tls_base, - struct strobe_value_generic *value, - struct strobemeta_payload *data, - void *payload) +static __always_inline uint64_t read_map_var(struct strobemeta_cfg *cfg, + size_t idx, void *tls_base, + struct strobe_value_generic *value, + struct strobemeta_payload *data, + size_t off) { struct strobe_map_descr* descr = &data->map_descrs[idx]; struct strobe_map_raw map; @@ -397,11 +399,11 @@ static __always_inline void *read_map_var(struct strobemeta_cfg *cfg, location = calc_location(&cfg->map_locs[idx], tls_base); if (!location) - return payload; + return off; bpf_probe_read_user(value, sizeof(struct strobe_value_generic), location); if (bpf_probe_read_user(&map, sizeof(struct strobe_map_raw), value->ptr)) - return payload; + return off; descr->id = map.id; descr->cnt = map.cnt; @@ -410,10 +412,10 @@ static __always_inline void *read_map_var(struct strobemeta_cfg *cfg, data->req_meta_valid = 1; } - len = bpf_probe_read_user_str(payload, STROBE_MAX_STR_LEN, map.tag); + len = bpf_probe_read_user_str(&data->payload[off], STROBE_MAX_STR_LEN, map.tag); if (len <= STROBE_MAX_STR_LEN) { descr->tag_len = len; - payload += len; + off += len; } #ifdef NO_UNROLL @@ -426,22 +428,22 @@ static __always_inline void *read_map_var(struct strobemeta_cfg *cfg, break; descr->key_lens[i] = 0; - len = bpf_probe_read_user_str(payload, STROBE_MAX_STR_LEN, + len = bpf_probe_read_user_str(&data->payload[off], STROBE_MAX_STR_LEN, map.entries[i].key); if (len <= STROBE_MAX_STR_LEN) { descr->key_lens[i] = len; - payload += len; + off += len; } descr->val_lens[i] = 0; - len = bpf_probe_read_user_str(payload, STROBE_MAX_STR_LEN, + len = bpf_probe_read_user_str(&data->payload[off], STROBE_MAX_STR_LEN, map.entries[i].val); if (len <= STROBE_MAX_STR_LEN) { descr->val_lens[i] = len; - payload += len; + off += len; } } - return payload; + return off; } #ifdef USE_BPF_LOOP @@ -455,14 +457,20 @@ struct read_var_ctx { struct strobemeta_payload *data; void *tls_base; struct strobemeta_cfg *cfg; - void *payload; + size_t payload_off; /* value gets mutated */ struct strobe_value_generic *value; enum read_type type; }; -static int read_var_callback(__u32 index, struct read_var_ctx *ctx) +static int read_var_callback(__u64 index, struct read_var_ctx *ctx) { + /* lose precision info for ctx->payload_off, verifier won't track + * double xor, barrier_var() is needed to force clang keep both xors. + */ + ctx->payload_off ^= index; + barrier_var(ctx->payload_off); + ctx->payload_off ^= index; switch (ctx->type) { case READ_INT_VAR: if (index >= STROBE_MAX_INTS) @@ -472,14 +480,18 @@ static int read_var_callback(__u32 index, struct read_var_ctx *ctx) case READ_MAP_VAR: if (index >= STROBE_MAX_MAPS) return 1; - ctx->payload = read_map_var(ctx->cfg, index, ctx->tls_base, - ctx->value, ctx->data, ctx->payload); + if (ctx->payload_off > sizeof(ctx->data->payload) - READ_MAP_VAR_PAYLOAD_CAP) + return 1; + ctx->payload_off = read_map_var(ctx->cfg, index, ctx->tls_base, + ctx->value, ctx->data, ctx->payload_off); break; case READ_STR_VAR: if (index >= STROBE_MAX_STRS) return 1; - ctx->payload += read_str_var(ctx->cfg, index, ctx->tls_base, - ctx->value, ctx->data, ctx->payload); + if (ctx->payload_off > sizeof(ctx->data->payload) - STROBE_MAX_STR_LEN) + return 1; + ctx->payload_off = read_str_var(ctx->cfg, index, ctx->tls_base, + ctx->value, ctx->data, ctx->payload_off); break; } return 0; @@ -501,7 +513,8 @@ static void *read_strobe_meta(struct task_struct *task, pid_t pid = bpf_get_current_pid_tgid() >> 32; struct strobe_value_generic value = {0}; struct strobemeta_cfg *cfg; - void *tls_base, *payload; + size_t payload_off; + void *tls_base; cfg = bpf_map_lookup_elem(&strobemeta_cfgs, &pid); if (!cfg) @@ -509,7 +522,7 @@ static void *read_strobe_meta(struct task_struct *task, data->int_vals_set_mask = 0; data->req_meta_valid = 0; - payload = data->payload; + payload_off = 0; /* * we don't have struct task_struct definition, it should be: * tls_base = (void *)task->thread.fsbase; @@ -522,7 +535,7 @@ static void *read_strobe_meta(struct task_struct *task, .tls_base = tls_base, .value = &value, .data = data, - .payload = payload, + .payload_off = 0, }; int err; @@ -540,6 +553,11 @@ static void *read_strobe_meta(struct task_struct *task, err = bpf_loop(STROBE_MAX_MAPS, read_var_callback, &ctx, 0); if (err != STROBE_MAX_MAPS) return NULL; + + payload_off = ctx.payload_off; + /* this should not really happen, here only to satisfy verifer */ + if (payload_off > sizeof(data->payload)) + payload_off = sizeof(data->payload); #else #ifdef NO_UNROLL #pragma clang loop unroll(disable) @@ -555,7 +573,7 @@ static void *read_strobe_meta(struct task_struct *task, #pragma unroll #endif /* NO_UNROLL */ for (int i = 0; i < STROBE_MAX_STRS; ++i) { - payload += read_str_var(cfg, i, tls_base, &value, data, payload); + payload_off = read_str_var(cfg, i, tls_base, &value, data, payload_off); } #ifdef NO_UNROLL #pragma clang loop unroll(disable) @@ -563,7 +581,7 @@ static void *read_strobe_meta(struct task_struct *task, #pragma unroll #endif /* NO_UNROLL */ for (int i = 0; i < STROBE_MAX_MAPS; ++i) { - payload = read_map_var(cfg, i, tls_base, &value, data, payload); + payload_off = read_map_var(cfg, i, tls_base, &value, data, payload_off); } #endif /* USE_BPF_LOOP */ @@ -571,7 +589,7 @@ static void *read_strobe_meta(struct task_struct *task, * return pointer right after end of payload, so it's possible to * calculate exact amount of useful data that needs to be sent */ - return payload; + return &data->payload[payload_off]; } SEC("raw_tracepoint/kfree_skb") -- cgit v1.2.3 From f40bfd1679446b22d321e64a1fa98b7d07d2be08 Mon Sep 17 00:00:00 2001 From: Eduard Zingerman Date: Tue, 21 Nov 2023 04:06:53 +0200 Subject: selftests/bpf: fix bpf_loop_bench for new callback verification scheme MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This is a preparatory change. A follow-up patch "bpf: verify callbacks as if they are called unknown number of times" changes logic for callbacks handling. While previously callbacks were verified as a single function call, new scheme takes into account that callbacks could be executed unknown number of times. This has dire implications for bpf_loop_bench: SEC("fentry/" SYS_PREFIX "sys_getpgid") int benchmark(void *ctx) { for (int i = 0; i < 1000; i++) { bpf_loop(nr_loops, empty_callback, NULL, 0); __sync_add_and_fetch(&hits, nr_loops); } return 0; } W/o callbacks change verifier sees it as a 1000 calls to empty_callback(). However, with callbacks change things become exponential: - i=0: state exploring empty_callback is scheduled with i=0 (a); - i=1: state exploring empty_callback is scheduled with i=1; ... - i=999: state exploring empty_callback is scheduled with i=999; - state (a) is popped from stack; - i=1: state exploring empty_callback is scheduled with i=1; ... Avoid this issue by rewriting outer loop as bpf_loop(). Unfortunately, this adds a function call to a loop at runtime, which negatively affects performance: throughput latency before: 149.919 ± 0.168 M ops/s, 6.670 ns/op after : 137.040 ± 0.187 M ops/s, 7.297 ns/op Acked-by: Andrii Nakryiko Signed-off-by: Eduard Zingerman Link: https://lore.kernel.org/r/20231121020701.26440-4-eddyz87@gmail.com Signed-off-by: Alexei Starovoitov --- tools/testing/selftests/bpf/progs/bpf_loop_bench.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) diff --git a/tools/testing/selftests/bpf/progs/bpf_loop_bench.c b/tools/testing/selftests/bpf/progs/bpf_loop_bench.c index 4ce76eb064c4..d461746fd3c1 100644 --- a/tools/testing/selftests/bpf/progs/bpf_loop_bench.c +++ b/tools/testing/selftests/bpf/progs/bpf_loop_bench.c @@ -15,13 +15,16 @@ static int empty_callback(__u32 index, void *data) return 0; } +static int outer_loop(__u32 index, void *data) +{ + bpf_loop(nr_loops, empty_callback, NULL, 0); + __sync_add_and_fetch(&hits, nr_loops); + return 0; +} + SEC("fentry/" SYS_PREFIX "sys_getpgid") int benchmark(void *ctx) { - for (int i = 0; i < 1000; i++) { - bpf_loop(nr_loops, empty_callback, NULL, 0); - - __sync_add_and_fetch(&hits, nr_loops); - } + bpf_loop(1000, outer_loop, NULL, 0); return 0; } -- cgit v1.2.3 From 683b96f9606ab7308ffb23c46ab43cecdef8a241 Mon Sep 17 00:00:00 2001 From: Eduard Zingerman Date: Tue, 21 Nov 2023 04:06:54 +0200 Subject: bpf: extract __check_reg_arg() utility function Split check_reg_arg() into two utility functions: - check_reg_arg() operating on registers from current verifier state; - __check_reg_arg() operating on a specific set of registers passed as a parameter; The __check_reg_arg() function would be used by a follow-up change for callbacks handling. Acked-by: Andrii Nakryiko Signed-off-by: Eduard Zingerman Link: https://lore.kernel.org/r/20231121020701.26440-5-eddyz87@gmail.com Signed-off-by: Alexei Starovoitov --- kernel/bpf/verifier.c | 19 +++++++++++++------ 1 file changed, 13 insertions(+), 6 deletions(-) diff --git a/kernel/bpf/verifier.c b/kernel/bpf/verifier.c index 6da370a047fe..e6e1bcfe00f5 100644 --- a/kernel/bpf/verifier.c +++ b/kernel/bpf/verifier.c @@ -3439,13 +3439,11 @@ static void mark_insn_zext(struct bpf_verifier_env *env, reg->subreg_def = DEF_NOT_SUBREG; } -static int check_reg_arg(struct bpf_verifier_env *env, u32 regno, - enum reg_arg_type t) +static int __check_reg_arg(struct bpf_verifier_env *env, struct bpf_reg_state *regs, u32 regno, + enum reg_arg_type t) { - struct bpf_verifier_state *vstate = env->cur_state; - struct bpf_func_state *state = vstate->frame[vstate->curframe]; struct bpf_insn *insn = env->prog->insnsi + env->insn_idx; - struct bpf_reg_state *reg, *regs = state->regs; + struct bpf_reg_state *reg; bool rw64; if (regno >= MAX_BPF_REG) { @@ -3486,6 +3484,15 @@ static int check_reg_arg(struct bpf_verifier_env *env, u32 regno, return 0; } +static int check_reg_arg(struct bpf_verifier_env *env, u32 regno, + enum reg_arg_type t) +{ + struct bpf_verifier_state *vstate = env->cur_state; + struct bpf_func_state *state = vstate->frame[vstate->curframe]; + + return __check_reg_arg(env, state->regs, regno, t); +} + static void mark_jmp_point(struct bpf_verifier_env *env, int idx) { env->insn_aux_data[idx].jmp_point = true; @@ -9350,7 +9357,7 @@ static void clear_caller_saved_regs(struct bpf_verifier_env *env, /* after the call registers r0 - r5 were scratched */ for (i = 0; i < CALLER_SAVED_REGS; i++) { mark_reg_not_init(env, regs, caller_saved[i]); - check_reg_arg(env, caller_saved[i], DST_OP_NO_MARK); + __check_reg_arg(env, regs, caller_saved[i], DST_OP_NO_MARK); } } -- cgit v1.2.3 From 58124a98cb8eda69d248d7f1de954c8b2767c945 Mon Sep 17 00:00:00 2001 From: Eduard Zingerman Date: Tue, 21 Nov 2023 04:06:55 +0200 Subject: bpf: extract setup_func_entry() utility function Move code for simulated stack frame creation to a separate utility function. This function would be used in the follow-up change for callbacks handling. Acked-by: Andrii Nakryiko Signed-off-by: Eduard Zingerman Link: https://lore.kernel.org/r/20231121020701.26440-6-eddyz87@gmail.com Signed-off-by: Alexei Starovoitov --- kernel/bpf/verifier.c | 84 +++++++++++++++++++++++++++++---------------------- 1 file changed, 48 insertions(+), 36 deletions(-) diff --git a/kernel/bpf/verifier.c b/kernel/bpf/verifier.c index e6e1bcfe00f5..68ee4803d3a2 100644 --- a/kernel/bpf/verifier.c +++ b/kernel/bpf/verifier.c @@ -9370,11 +9370,10 @@ static int set_callee_state(struct bpf_verifier_env *env, struct bpf_func_state *caller, struct bpf_func_state *callee, int insn_idx); -static int __check_func_call(struct bpf_verifier_env *env, struct bpf_insn *insn, - int *insn_idx, int subprog, - set_callee_state_fn set_callee_state_cb) +static int setup_func_entry(struct bpf_verifier_env *env, int subprog, int callsite, + set_callee_state_fn set_callee_state_cb, + struct bpf_verifier_state *state) { - struct bpf_verifier_state *state = env->cur_state; struct bpf_func_state *caller, *callee; int err; @@ -9384,13 +9383,53 @@ static int __check_func_call(struct bpf_verifier_env *env, struct bpf_insn *insn return -E2BIG; } - caller = state->frame[state->curframe]; if (state->frame[state->curframe + 1]) { verbose(env, "verifier bug. Frame %d already allocated\n", state->curframe + 1); return -EFAULT; } + caller = state->frame[state->curframe]; + callee = kzalloc(sizeof(*callee), GFP_KERNEL); + if (!callee) + return -ENOMEM; + state->frame[state->curframe + 1] = callee; + + /* callee cannot access r0, r6 - r9 for reading and has to write + * into its own stack before reading from it. + * callee can read/write into caller's stack + */ + init_func_state(env, callee, + /* remember the callsite, it will be used by bpf_exit */ + callsite, + state->curframe + 1 /* frameno within this callchain */, + subprog /* subprog number within this prog */); + /* Transfer references to the callee */ + err = copy_reference_state(callee, caller); + err = err ?: set_callee_state_cb(env, caller, callee, callsite); + if (err) + goto err_out; + + /* only increment it after check_reg_arg() finished */ + state->curframe++; + + return 0; + +err_out: + free_func_state(callee); + state->frame[state->curframe + 1] = NULL; + return err; +} + +static int __check_func_call(struct bpf_verifier_env *env, struct bpf_insn *insn, + int *insn_idx, int subprog, + set_callee_state_fn set_callee_state_cb) +{ + struct bpf_verifier_state *state = env->cur_state; + struct bpf_func_state *caller, *callee; + int err; + + caller = state->frame[state->curframe]; err = btf_check_subprog_call(env, subprog, caller->regs); if (err == -EFAULT) return err; @@ -9460,35 +9499,12 @@ static int __check_func_call(struct bpf_verifier_env *env, struct bpf_insn *insn return 0; } - callee = kzalloc(sizeof(*callee), GFP_KERNEL); - if (!callee) - return -ENOMEM; - state->frame[state->curframe + 1] = callee; - - /* callee cannot access r0, r6 - r9 for reading and has to write - * into its own stack before reading from it. - * callee can read/write into caller's stack - */ - init_func_state(env, callee, - /* remember the callsite, it will be used by bpf_exit */ - *insn_idx /* callsite */, - state->curframe + 1 /* frameno within this callchain */, - subprog /* subprog number within this prog */); - - /* Transfer references to the callee */ - err = copy_reference_state(callee, caller); + err = setup_func_entry(env, subprog, *insn_idx, set_callee_state_cb, state); if (err) - goto err_out; - - err = set_callee_state_cb(env, caller, callee, *insn_idx); - if (err) - goto err_out; + return err; clear_caller_saved_regs(env, caller->regs); - /* only increment it after check_reg_arg() finished */ - state->curframe++; - /* and go analyze first insn of the callee */ *insn_idx = env->subprog_info[subprog].start - 1; @@ -9496,14 +9512,10 @@ static int __check_func_call(struct bpf_verifier_env *env, struct bpf_insn *insn verbose(env, "caller:\n"); print_verifier_state(env, caller, true); verbose(env, "callee:\n"); - print_verifier_state(env, callee, true); + print_verifier_state(env, state->frame[state->curframe], true); } - return 0; -err_out: - free_func_state(callee); - state->frame[state->curframe + 1] = NULL; - return err; + return 0; } int map_set_for_each_callback_args(struct bpf_verifier_env *env, -- cgit v1.2.3 From ab5cfac139ab8576fb54630d4cca23c3e690ee90 Mon Sep 17 00:00:00 2001 From: Eduard Zingerman Date: Tue, 21 Nov 2023 04:06:56 +0200 Subject: bpf: verify callbacks as if they are called unknown number of times Prior to this patch callbacks were handled as regular function calls, execution of callback body was modeled exactly once. This patch updates callbacks handling logic as follows: - introduces a function push_callback_call() that schedules callback body verification in env->head stack; - updates prepare_func_exit() to reschedule callback body verification upon BPF_EXIT; - as calls to bpf_*_iter_next(), calls to callback invoking functions are marked as checkpoints; - is_state_visited() is updated to stop callback based iteration when some identical parent state is found. Paths with callback function invoked zero times are now verified first, which leads to necessity to modify some selftests: - the following negative tests required adding release/unlock/drop calls to avoid previously masked unrelated error reports: - cb_refs.c:underflow_prog - exceptions_fail.c:reject_rbtree_add_throw - exceptions_fail.c:reject_with_cp_reference - the following precision tracking selftests needed change in expected log trace: - verifier_subprog_precision.c:callback_result_precise (note: r0 precision is no longer propagated inside callback and I think this is a correct behavior) - verifier_subprog_precision.c:parent_callee_saved_reg_precise_with_callback - verifier_subprog_precision.c:parent_stack_slot_precise_with_callback Reported-by: Andrew Werner Closes: https://lore.kernel.org/bpf/CA+vRuzPChFNXmouzGG+wsy=6eMcfr1mFG0F3g7rbg-sedGKW3w@mail.gmail.com/ Acked-by: Andrii Nakryiko Signed-off-by: Eduard Zingerman Link: https://lore.kernel.org/r/20231121020701.26440-7-eddyz87@gmail.com Signed-off-by: Alexei Starovoitov --- include/linux/bpf_verifier.h | 5 + kernel/bpf/verifier.c | 274 +++++++++++++-------- tools/testing/selftests/bpf/progs/cb_refs.c | 1 + .../testing/selftests/bpf/progs/exceptions_fail.c | 2 + .../bpf/progs/verifier_subprog_precision.c | 71 ++++-- 5 files changed, 240 insertions(+), 113 deletions(-) diff --git a/include/linux/bpf_verifier.h b/include/linux/bpf_verifier.h index 24213a99cc79..dd326936dd6f 100644 --- a/include/linux/bpf_verifier.h +++ b/include/linux/bpf_verifier.h @@ -400,6 +400,7 @@ struct bpf_verifier_state { struct bpf_idx_pair *jmp_history; u32 jmp_history_cnt; u32 dfs_depth; + u32 callback_unroll_depth; }; #define bpf_get_spilled_reg(slot, frame, mask) \ @@ -511,6 +512,10 @@ struct bpf_insn_aux_data { * this instruction, regardless of any heuristics */ bool force_checkpoint; + /* true if instruction is a call to a helper function that + * accepts callback function as a parameter. + */ + bool calls_callback; }; #define MAX_USED_MAPS 64 /* max number of maps accessed by one eBPF program */ diff --git a/kernel/bpf/verifier.c b/kernel/bpf/verifier.c index 68ee4803d3a2..a60dfa56ebb3 100644 --- a/kernel/bpf/verifier.c +++ b/kernel/bpf/verifier.c @@ -547,13 +547,12 @@ static bool is_dynptr_ref_function(enum bpf_func_id func_id) return func_id == BPF_FUNC_dynptr_data; } -static bool is_callback_calling_kfunc(u32 btf_id); +static bool is_sync_callback_calling_kfunc(u32 btf_id); static bool is_bpf_throw_kfunc(struct bpf_insn *insn); -static bool is_callback_calling_function(enum bpf_func_id func_id) +static bool is_sync_callback_calling_function(enum bpf_func_id func_id) { return func_id == BPF_FUNC_for_each_map_elem || - func_id == BPF_FUNC_timer_set_callback || func_id == BPF_FUNC_find_vma || func_id == BPF_FUNC_loop || func_id == BPF_FUNC_user_ringbuf_drain; @@ -564,6 +563,18 @@ static bool is_async_callback_calling_function(enum bpf_func_id func_id) return func_id == BPF_FUNC_timer_set_callback; } +static bool is_callback_calling_function(enum bpf_func_id func_id) +{ + return is_sync_callback_calling_function(func_id) || + is_async_callback_calling_function(func_id); +} + +static bool is_sync_callback_calling_insn(struct bpf_insn *insn) +{ + return (bpf_helper_call(insn) && is_sync_callback_calling_function(insn->imm)) || + (bpf_pseudo_kfunc_call(insn) && is_sync_callback_calling_kfunc(insn->imm)); +} + static bool is_storage_get_function(enum bpf_func_id func_id) { return func_id == BPF_FUNC_sk_storage_get || @@ -1808,6 +1819,7 @@ static int copy_verifier_state(struct bpf_verifier_state *dst_state, dst_state->first_insn_idx = src->first_insn_idx; dst_state->last_insn_idx = src->last_insn_idx; dst_state->dfs_depth = src->dfs_depth; + dst_state->callback_unroll_depth = src->callback_unroll_depth; dst_state->used_as_loop_entry = src->used_as_loop_entry; for (i = 0; i <= src->curframe; i++) { dst = dst_state->frame[i]; @@ -3731,6 +3743,8 @@ static void fmt_stack_mask(char *buf, ssize_t buf_sz, u64 stack_mask) } } +static bool calls_callback(struct bpf_verifier_env *env, int insn_idx); + /* For given verifier state backtrack_insn() is called from the last insn to * the first insn. Its purpose is to compute a bitmask of registers and * stack slots that needs precision in the parent verifier state. @@ -3906,16 +3920,13 @@ static int backtrack_insn(struct bpf_verifier_env *env, int idx, int subseq_idx, return -EFAULT; return 0; } - } else if ((bpf_helper_call(insn) && - is_callback_calling_function(insn->imm) && - !is_async_callback_calling_function(insn->imm)) || - (bpf_pseudo_kfunc_call(insn) && is_callback_calling_kfunc(insn->imm))) { - /* callback-calling helper or kfunc call, which means - * we are exiting from subprog, but unlike the subprog - * call handling above, we shouldn't propagate - * precision of r1-r5 (if any requested), as they are - * not actually arguments passed directly to callback - * subprogs + } else if (is_sync_callback_calling_insn(insn) && idx != subseq_idx - 1) { + /* exit from callback subprog to callback-calling helper or + * kfunc call. Use idx/subseq_idx check to discern it from + * straight line code backtracking. + * Unlike the subprog call handling above, we shouldn't + * propagate precision of r1-r5 (if any requested), as they are + * not actually arguments passed directly to callback subprogs */ if (bt_reg_mask(bt) & ~BPF_REGMASK_ARGS) { verbose(env, "BUG regs %x\n", bt_reg_mask(bt)); @@ -3950,10 +3961,18 @@ static int backtrack_insn(struct bpf_verifier_env *env, int idx, int subseq_idx, } else if (opcode == BPF_EXIT) { bool r0_precise; + /* Backtracking to a nested function call, 'idx' is a part of + * the inner frame 'subseq_idx' is a part of the outer frame. + * In case of a regular function call, instructions giving + * precision to registers R1-R5 should have been found already. + * In case of a callback, it is ok to have R1-R5 marked for + * backtracking, as these registers are set by the function + * invoking callback. + */ + if (subseq_idx >= 0 && calls_callback(env, subseq_idx)) + for (i = BPF_REG_1; i <= BPF_REG_5; i++) + bt_clear_reg(bt, i); if (bt_reg_mask(bt) & BPF_REGMASK_ARGS) { - /* if backtracing was looking for registers R1-R5 - * they should have been found already. - */ verbose(env, "BUG regs %x\n", bt_reg_mask(bt)); WARN_ONCE(1, "verifier backtracking bug"); return -EFAULT; @@ -9421,11 +9440,11 @@ err_out: return err; } -static int __check_func_call(struct bpf_verifier_env *env, struct bpf_insn *insn, - int *insn_idx, int subprog, - set_callee_state_fn set_callee_state_cb) +static int push_callback_call(struct bpf_verifier_env *env, struct bpf_insn *insn, + int insn_idx, int subprog, + set_callee_state_fn set_callee_state_cb) { - struct bpf_verifier_state *state = env->cur_state; + struct bpf_verifier_state *state = env->cur_state, *callback_state; struct bpf_func_state *caller, *callee; int err; @@ -9433,44 +9452,22 @@ static int __check_func_call(struct bpf_verifier_env *env, struct bpf_insn *insn err = btf_check_subprog_call(env, subprog, caller->regs); if (err == -EFAULT) return err; - if (subprog_is_global(env, subprog)) { - if (err) { - verbose(env, "Caller passes invalid args into func#%d\n", - subprog); - return err; - } else { - if (env->log.level & BPF_LOG_LEVEL) - verbose(env, - "Func#%d is global and valid. Skipping.\n", - subprog); - clear_caller_saved_regs(env, caller->regs); - - /* All global functions return a 64-bit SCALAR_VALUE */ - mark_reg_unknown(env, caller->regs, BPF_REG_0); - caller->regs[BPF_REG_0].subreg_def = DEF_NOT_SUBREG; - - /* continue with next insn after call */ - return 0; - } - } /* set_callee_state is used for direct subprog calls, but we are * interested in validating only BPF helpers that can call subprogs as * callbacks */ - if (set_callee_state_cb != set_callee_state) { - env->subprog_info[subprog].is_cb = true; - if (bpf_pseudo_kfunc_call(insn) && - !is_callback_calling_kfunc(insn->imm)) { - verbose(env, "verifier bug: kfunc %s#%d not marked as callback-calling\n", - func_id_name(insn->imm), insn->imm); - return -EFAULT; - } else if (!bpf_pseudo_kfunc_call(insn) && - !is_callback_calling_function(insn->imm)) { /* helper */ - verbose(env, "verifier bug: helper %s#%d not marked as callback-calling\n", - func_id_name(insn->imm), insn->imm); - return -EFAULT; - } + env->subprog_info[subprog].is_cb = true; + if (bpf_pseudo_kfunc_call(insn) && + !is_sync_callback_calling_kfunc(insn->imm)) { + verbose(env, "verifier bug: kfunc %s#%d not marked as callback-calling\n", + func_id_name(insn->imm), insn->imm); + return -EFAULT; + } else if (!bpf_pseudo_kfunc_call(insn) && + !is_callback_calling_function(insn->imm)) { /* helper */ + verbose(env, "verifier bug: helper %s#%d not marked as callback-calling\n", + func_id_name(insn->imm), insn->imm); + return -EFAULT; } if (insn->code == (BPF_JMP | BPF_CALL) && @@ -9481,25 +9478,76 @@ static int __check_func_call(struct bpf_verifier_env *env, struct bpf_insn *insn /* there is no real recursion here. timer callbacks are async */ env->subprog_info[subprog].is_async_cb = true; async_cb = push_async_cb(env, env->subprog_info[subprog].start, - *insn_idx, subprog); + insn_idx, subprog); if (!async_cb) return -EFAULT; callee = async_cb->frame[0]; callee->async_entry_cnt = caller->async_entry_cnt + 1; /* Convert bpf_timer_set_callback() args into timer callback args */ - err = set_callee_state_cb(env, caller, callee, *insn_idx); + err = set_callee_state_cb(env, caller, callee, insn_idx); if (err) return err; + return 0; + } + + /* for callback functions enqueue entry to callback and + * proceed with next instruction within current frame. + */ + callback_state = push_stack(env, env->subprog_info[subprog].start, insn_idx, false); + if (!callback_state) + return -ENOMEM; + + err = setup_func_entry(env, subprog, insn_idx, set_callee_state_cb, + callback_state); + if (err) + return err; + + callback_state->callback_unroll_depth++; + return 0; +} + +static int check_func_call(struct bpf_verifier_env *env, struct bpf_insn *insn, + int *insn_idx) +{ + struct bpf_verifier_state *state = env->cur_state; + struct bpf_func_state *caller; + int err, subprog, target_insn; + + target_insn = *insn_idx + insn->imm + 1; + subprog = find_subprog(env, target_insn); + if (subprog < 0) { + verbose(env, "verifier bug. No program starts at insn %d\n", target_insn); + return -EFAULT; + } + + caller = state->frame[state->curframe]; + err = btf_check_subprog_call(env, subprog, caller->regs); + if (err == -EFAULT) + return err; + if (subprog_is_global(env, subprog)) { + if (err) { + verbose(env, "Caller passes invalid args into func#%d\n", subprog); + return err; + } + + if (env->log.level & BPF_LOG_LEVEL) + verbose(env, "Func#%d is global and valid. Skipping.\n", subprog); clear_caller_saved_regs(env, caller->regs); + + /* All global functions return a 64-bit SCALAR_VALUE */ mark_reg_unknown(env, caller->regs, BPF_REG_0); caller->regs[BPF_REG_0].subreg_def = DEF_NOT_SUBREG; + /* continue with next insn after call */ return 0; } - err = setup_func_entry(env, subprog, *insn_idx, set_callee_state_cb, state); + /* for regular function entry setup new frame and continue + * from that frame. + */ + err = setup_func_entry(env, subprog, *insn_idx, set_callee_state, state); if (err) return err; @@ -9559,22 +9607,6 @@ static int set_callee_state(struct bpf_verifier_env *env, return 0; } -static int check_func_call(struct bpf_verifier_env *env, struct bpf_insn *insn, - int *insn_idx) -{ - int subprog, target_insn; - - target_insn = *insn_idx + insn->imm + 1; - subprog = find_subprog(env, target_insn); - if (subprog < 0) { - verbose(env, "verifier bug. No program starts at insn %d\n", - target_insn); - return -EFAULT; - } - - return __check_func_call(env, insn, insn_idx, subprog, set_callee_state); -} - static int set_map_elem_callback_state(struct bpf_verifier_env *env, struct bpf_func_state *caller, struct bpf_func_state *callee, @@ -9798,6 +9830,11 @@ static int prepare_func_exit(struct bpf_verifier_env *env, int *insn_idx) verbose_invalid_scalar(env, r0, &range, "callback return", "R0"); return -EINVAL; } + if (!calls_callback(env, callee->callsite)) { + verbose(env, "BUG: in callback at %d, callsite %d !calls_callback\n", + *insn_idx, callee->callsite); + return -EFAULT; + } } else { /* return to the caller whatever r0 had in the callee */ caller->regs[BPF_REG_0] = *r0; @@ -9815,7 +9852,15 @@ static int prepare_func_exit(struct bpf_verifier_env *env, int *insn_idx) return err; } - *insn_idx = callee->callsite + 1; + /* for callbacks like bpf_loop or bpf_for_each_map_elem go back to callsite, + * there function call logic would reschedule callback visit. If iteration + * converges is_state_visited() would prune that visit eventually. + */ + if (callee->in_callback_fn) + *insn_idx = callee->callsite; + else + *insn_idx = callee->callsite + 1; + if (env->log.level & BPF_LOG_LEVEL) { verbose(env, "returning from callee:\n"); print_verifier_state(env, callee, true); @@ -10228,24 +10273,24 @@ static int check_helper_call(struct bpf_verifier_env *env, struct bpf_insn *insn } break; case BPF_FUNC_for_each_map_elem: - err = __check_func_call(env, insn, insn_idx_p, meta.subprogno, - set_map_elem_callback_state); + err = push_callback_call(env, insn, insn_idx, meta.subprogno, + set_map_elem_callback_state); break; case BPF_FUNC_timer_set_callback: - err = __check_func_call(env, insn, insn_idx_p, meta.subprogno, - set_timer_callback_state); + err = push_callback_call(env, insn, insn_idx, meta.subprogno, + set_timer_callback_state); break; case BPF_FUNC_find_vma: - err = __check_func_call(env, insn, insn_idx_p, meta.subprogno, - set_find_vma_callback_state); + err = push_callback_call(env, insn, insn_idx, meta.subprogno, + set_find_vma_callback_state); break; case BPF_FUNC_snprintf: err = check_bpf_snprintf_call(env, regs); break; case BPF_FUNC_loop: update_loop_inline_state(env, meta.subprogno); - err = __check_func_call(env, insn, insn_idx_p, meta.subprogno, - set_loop_callback_state); + err = push_callback_call(env, insn, insn_idx, meta.subprogno, + set_loop_callback_state); break; case BPF_FUNC_dynptr_from_mem: if (regs[BPF_REG_1].type != PTR_TO_MAP_VALUE) { @@ -10341,8 +10386,8 @@ static int check_helper_call(struct bpf_verifier_env *env, struct bpf_insn *insn break; } case BPF_FUNC_user_ringbuf_drain: - err = __check_func_call(env, insn, insn_idx_p, meta.subprogno, - set_user_ringbuf_callback_state); + err = push_callback_call(env, insn, insn_idx, meta.subprogno, + set_user_ringbuf_callback_state); break; } @@ -11230,7 +11275,7 @@ static bool is_bpf_graph_api_kfunc(u32 btf_id) btf_id == special_kfunc_list[KF_bpf_refcount_acquire_impl]; } -static bool is_callback_calling_kfunc(u32 btf_id) +static bool is_sync_callback_calling_kfunc(u32 btf_id) { return btf_id == special_kfunc_list[KF_bpf_rbtree_add_impl]; } @@ -11982,6 +12027,21 @@ static int check_kfunc_call(struct bpf_verifier_env *env, struct bpf_insn *insn, return -EACCES; } + /* Check the arguments */ + err = check_kfunc_args(env, &meta, insn_idx); + if (err < 0) + return err; + + if (meta.func_id == special_kfunc_list[KF_bpf_rbtree_add_impl]) { + err = push_callback_call(env, insn, insn_idx, meta.subprogno, + set_rbtree_add_callback_state); + if (err) { + verbose(env, "kfunc %s#%d failed callback verification\n", + func_name, meta.func_id); + return err; + } + } + rcu_lock = is_kfunc_bpf_rcu_read_lock(&meta); rcu_unlock = is_kfunc_bpf_rcu_read_unlock(&meta); @@ -12017,10 +12077,6 @@ static int check_kfunc_call(struct bpf_verifier_env *env, struct bpf_insn *insn, return -EINVAL; } - /* Check the arguments */ - err = check_kfunc_args(env, &meta, insn_idx); - if (err < 0) - return err; /* In case of release function, we get register number of refcounted * PTR_TO_BTF_ID in bpf_kfunc_arg_meta, do the release now. */ @@ -12054,16 +12110,6 @@ static int check_kfunc_call(struct bpf_verifier_env *env, struct bpf_insn *insn, } } - if (meta.func_id == special_kfunc_list[KF_bpf_rbtree_add_impl]) { - err = __check_func_call(env, insn, insn_idx_p, meta.subprogno, - set_rbtree_add_callback_state); - if (err) { - verbose(env, "kfunc %s#%d failed callback verification\n", - func_name, meta.func_id); - return err; - } - } - if (meta.func_id == special_kfunc_list[KF_bpf_throw]) { if (!bpf_jit_supports_exceptions()) { verbose(env, "JIT does not support calling kfunc %s#%d\n", @@ -15427,6 +15473,15 @@ static bool is_force_checkpoint(struct bpf_verifier_env *env, int insn_idx) return env->insn_aux_data[insn_idx].force_checkpoint; } +static void mark_calls_callback(struct bpf_verifier_env *env, int idx) +{ + env->insn_aux_data[idx].calls_callback = true; +} + +static bool calls_callback(struct bpf_verifier_env *env, int insn_idx) +{ + return env->insn_aux_data[insn_idx].calls_callback; +} enum { DONE_EXPLORING = 0, @@ -15540,6 +15595,21 @@ static int visit_insn(int t, struct bpf_verifier_env *env) * async state will be pushed for further exploration. */ mark_prune_point(env, t); + /* For functions that invoke callbacks it is not known how many times + * callback would be called. Verifier models callback calling functions + * by repeatedly visiting callback bodies and returning to origin call + * instruction. + * In order to stop such iteration verifier needs to identify when a + * state identical some state from a previous iteration is reached. + * Check below forces creation of checkpoint before callback calling + * instruction to allow search for such identical states. + */ + if (is_sync_callback_calling_insn(insn)) { + mark_calls_callback(env, t); + mark_force_checkpoint(env, t); + mark_prune_point(env, t); + mark_jmp_point(env, t); + } if (insn->src_reg == BPF_PSEUDO_KFUNC_CALL) { struct bpf_kfunc_call_arg_meta meta; @@ -17009,10 +17079,16 @@ static int is_state_visited(struct bpf_verifier_env *env, int insn_idx) } goto skip_inf_loop_check; } + if (calls_callback(env, insn_idx)) { + if (states_equal(env, &sl->state, cur, true)) + goto hit; + goto skip_inf_loop_check; + } /* attempt to detect infinite loop to avoid unnecessary doomed work */ if (states_maybe_looping(&sl->state, cur) && states_equal(env, &sl->state, cur, false) && - !iter_active_depths_differ(&sl->state, cur)) { + !iter_active_depths_differ(&sl->state, cur) && + sl->state.callback_unroll_depth == cur->callback_unroll_depth) { verbose_linfo(env, insn_idx, "; "); verbose(env, "infinite loop detected at insn %d\n", insn_idx); verbose(env, "cur state:"); diff --git a/tools/testing/selftests/bpf/progs/cb_refs.c b/tools/testing/selftests/bpf/progs/cb_refs.c index 76d661b20e87..56c764df8196 100644 --- a/tools/testing/selftests/bpf/progs/cb_refs.c +++ b/tools/testing/selftests/bpf/progs/cb_refs.c @@ -33,6 +33,7 @@ int underflow_prog(void *ctx) if (!p) return 0; bpf_for_each_map_elem(&array_map, cb1, &p, 0); + bpf_kfunc_call_test_release(p); return 0; } diff --git a/tools/testing/selftests/bpf/progs/exceptions_fail.c b/tools/testing/selftests/bpf/progs/exceptions_fail.c index 4c39e920dac2..8c0ef2742208 100644 --- a/tools/testing/selftests/bpf/progs/exceptions_fail.c +++ b/tools/testing/selftests/bpf/progs/exceptions_fail.c @@ -171,6 +171,7 @@ int reject_with_rbtree_add_throw(void *ctx) return 0; bpf_spin_lock(&lock); bpf_rbtree_add(&rbtree, &f->node, rbless); + bpf_spin_unlock(&lock); return 0; } @@ -214,6 +215,7 @@ int reject_with_cb_reference(void *ctx) if (!f) return 0; bpf_loop(5, subprog_cb_ref, NULL, 0); + bpf_obj_drop(f); return 0; } diff --git a/tools/testing/selftests/bpf/progs/verifier_subprog_precision.c b/tools/testing/selftests/bpf/progs/verifier_subprog_precision.c index db6b3143338b..da803cffb5ef 100644 --- a/tools/testing/selftests/bpf/progs/verifier_subprog_precision.c +++ b/tools/testing/selftests/bpf/progs/verifier_subprog_precision.c @@ -119,15 +119,26 @@ __naked int global_subprog_result_precise(void) SEC("?raw_tp") __success __log_level(2) +/* First simulated path does not include callback body */ __msg("14: (0f) r1 += r6") -__msg("mark_precise: frame0: last_idx 14 first_idx 10") +__msg("mark_precise: frame0: last_idx 14 first_idx 9") __msg("mark_precise: frame0: regs=r6 stack= before 13: (bf) r1 = r7") __msg("mark_precise: frame0: regs=r6 stack= before 12: (27) r6 *= 4") __msg("mark_precise: frame0: regs=r6 stack= before 11: (25) if r6 > 0x3 goto pc+4") __msg("mark_precise: frame0: regs=r6 stack= before 10: (bf) r6 = r0") -__msg("mark_precise: frame0: parent state regs=r0 stack=:") -__msg("mark_precise: frame0: last_idx 18 first_idx 0") -__msg("mark_precise: frame0: regs=r0 stack= before 18: (95) exit") +__msg("mark_precise: frame0: regs=r0 stack= before 9: (85) call bpf_loop") +/* State entering callback body popped from states stack */ +__msg("from 9 to 17: frame1:") +__msg("17: frame1: R1=scalar() R2=0 R10=fp0 cb") +__msg("17: (b7) r0 = 0") +__msg("18: (95) exit") +__msg("returning from callee:") +__msg("to caller at 9:") +/* r4 (flags) is always precise for bpf_loop() */ +__msg("frame 0: propagating r4") +__msg("mark_precise: frame0: last_idx 9 first_idx 9 subseq_idx -1") +__msg("mark_precise: frame0: regs=r4 stack= before 18: (95) exit") +__msg("from 18 to 9: safe") __naked int callback_result_precise(void) { asm volatile ( @@ -233,20 +244,36 @@ __naked int parent_callee_saved_reg_precise_global(void) SEC("?raw_tp") __success __log_level(2) +/* First simulated path does not include callback body */ __msg("12: (0f) r1 += r6") -__msg("mark_precise: frame0: last_idx 12 first_idx 10") +__msg("mark_precise: frame0: last_idx 12 first_idx 9") __msg("mark_precise: frame0: regs=r6 stack= before 11: (bf) r1 = r7") __msg("mark_precise: frame0: regs=r6 stack= before 10: (27) r6 *= 4") +__msg("mark_precise: frame0: regs=r6 stack= before 9: (85) call bpf_loop") __msg("mark_precise: frame0: parent state regs=r6 stack=:") -__msg("mark_precise: frame0: last_idx 16 first_idx 0") -__msg("mark_precise: frame0: regs=r6 stack= before 16: (95) exit") -__msg("mark_precise: frame1: regs= stack= before 15: (b7) r0 = 0") -__msg("mark_precise: frame1: regs= stack= before 9: (85) call bpf_loop#181") +__msg("mark_precise: frame0: last_idx 8 first_idx 0 subseq_idx 9") __msg("mark_precise: frame0: regs=r6 stack= before 8: (b7) r4 = 0") __msg("mark_precise: frame0: regs=r6 stack= before 7: (b7) r3 = 0") __msg("mark_precise: frame0: regs=r6 stack= before 6: (bf) r2 = r8") __msg("mark_precise: frame0: regs=r6 stack= before 5: (b7) r1 = 1") __msg("mark_precise: frame0: regs=r6 stack= before 4: (b7) r6 = 3") +/* State entering callback body popped from states stack */ +__msg("from 9 to 15: frame1:") +__msg("15: frame1: R1=scalar() R2=0 R10=fp0 cb") +__msg("15: (b7) r0 = 0") +__msg("16: (95) exit") +__msg("returning from callee:") +__msg("to caller at 9:") +/* r4 (flags) is always precise for bpf_loop(), + * r6 was marked before backtracking to callback body. + */ +__msg("frame 0: propagating r4,r6") +__msg("mark_precise: frame0: last_idx 9 first_idx 9 subseq_idx -1") +__msg("mark_precise: frame0: regs=r4,r6 stack= before 16: (95) exit") +__msg("mark_precise: frame1: regs= stack= before 15: (b7) r0 = 0") +__msg("mark_precise: frame1: regs= stack= before 9: (85) call bpf_loop") +__msg("mark_precise: frame0: parent state regs= stack=:") +__msg("from 16 to 9: safe") __naked int parent_callee_saved_reg_precise_with_callback(void) { asm volatile ( @@ -373,22 +400,38 @@ __naked int parent_stack_slot_precise_global(void) SEC("?raw_tp") __success __log_level(2) +/* First simulated path does not include callback body */ __msg("14: (0f) r1 += r6") -__msg("mark_precise: frame0: last_idx 14 first_idx 11") +__msg("mark_precise: frame0: last_idx 14 first_idx 10") __msg("mark_precise: frame0: regs=r6 stack= before 13: (bf) r1 = r7") __msg("mark_precise: frame0: regs=r6 stack= before 12: (27) r6 *= 4") __msg("mark_precise: frame0: regs=r6 stack= before 11: (79) r6 = *(u64 *)(r10 -8)") +__msg("mark_precise: frame0: regs= stack=-8 before 10: (85) call bpf_loop") __msg("mark_precise: frame0: parent state regs= stack=-8:") -__msg("mark_precise: frame0: last_idx 18 first_idx 0") -__msg("mark_precise: frame0: regs= stack=-8 before 18: (95) exit") -__msg("mark_precise: frame1: regs= stack= before 17: (b7) r0 = 0") -__msg("mark_precise: frame1: regs= stack= before 10: (85) call bpf_loop#181") +__msg("mark_precise: frame0: last_idx 9 first_idx 0 subseq_idx 10") __msg("mark_precise: frame0: regs= stack=-8 before 9: (b7) r4 = 0") __msg("mark_precise: frame0: regs= stack=-8 before 8: (b7) r3 = 0") __msg("mark_precise: frame0: regs= stack=-8 before 7: (bf) r2 = r8") __msg("mark_precise: frame0: regs= stack=-8 before 6: (bf) r1 = r6") __msg("mark_precise: frame0: regs= stack=-8 before 5: (7b) *(u64 *)(r10 -8) = r6") __msg("mark_precise: frame0: regs=r6 stack= before 4: (b7) r6 = 3") +/* State entering callback body popped from states stack */ +__msg("from 10 to 17: frame1:") +__msg("17: frame1: R1=scalar() R2=0 R10=fp0 cb") +__msg("17: (b7) r0 = 0") +__msg("18: (95) exit") +__msg("returning from callee:") +__msg("to caller at 10:") +/* r4 (flags) is always precise for bpf_loop(), + * fp-8 was marked before backtracking to callback body. + */ +__msg("frame 0: propagating r4,fp-8") +__msg("mark_precise: frame0: last_idx 10 first_idx 10 subseq_idx -1") +__msg("mark_precise: frame0: regs=r4 stack=-8 before 18: (95) exit") +__msg("mark_precise: frame1: regs= stack= before 17: (b7) r0 = 0") +__msg("mark_precise: frame1: regs= stack= before 10: (85) call bpf_loop#181") +__msg("mark_precise: frame0: parent state regs= stack=:") +__msg("from 18 to 10: safe") __naked int parent_stack_slot_precise_with_callback(void) { asm volatile ( -- cgit v1.2.3 From 958465e217dbf5fc6677d42d8827fb3073d86afd Mon Sep 17 00:00:00 2001 From: Eduard Zingerman Date: Tue, 21 Nov 2023 04:06:57 +0200 Subject: selftests/bpf: tests for iterating callbacks A set of test cases to check behavior of callback handling logic, check if verifier catches the following situations: - program not safe on second callback iteration; - program not safe on zero callback iterations; - infinite loop inside a callback. Verify that callback logic works for bpf_loop, bpf_for_each_map_elem, bpf_user_ringbuf_drain, bpf_find_vma. Acked-by: Andrii Nakryiko Signed-off-by: Eduard Zingerman Link: https://lore.kernel.org/r/20231121020701.26440-8-eddyz87@gmail.com Signed-off-by: Alexei Starovoitov --- tools/testing/selftests/bpf/prog_tests/verifier.c | 2 + .../bpf/progs/verifier_iterating_callbacks.c | 147 +++++++++++++++++++++ 2 files changed, 149 insertions(+) create mode 100644 tools/testing/selftests/bpf/progs/verifier_iterating_callbacks.c diff --git a/tools/testing/selftests/bpf/prog_tests/verifier.c b/tools/testing/selftests/bpf/prog_tests/verifier.c index e5c61aa6604a..5cfa7a6316b6 100644 --- a/tools/testing/selftests/bpf/prog_tests/verifier.c +++ b/tools/testing/selftests/bpf/prog_tests/verifier.c @@ -31,6 +31,7 @@ #include "verifier_helper_restricted.skel.h" #include "verifier_helper_value_access.skel.h" #include "verifier_int_ptr.skel.h" +#include "verifier_iterating_callbacks.skel.h" #include "verifier_jeq_infer_not_null.skel.h" #include "verifier_ld_ind.skel.h" #include "verifier_ldsx.skel.h" @@ -139,6 +140,7 @@ void test_verifier_helper_packet_access(void) { RUN(verifier_helper_packet_acces void test_verifier_helper_restricted(void) { RUN(verifier_helper_restricted); } void test_verifier_helper_value_access(void) { RUN(verifier_helper_value_access); } void test_verifier_int_ptr(void) { RUN(verifier_int_ptr); } +void test_verifier_iterating_callbacks(void) { RUN(verifier_iterating_callbacks); } void test_verifier_jeq_infer_not_null(void) { RUN(verifier_jeq_infer_not_null); } void test_verifier_ld_ind(void) { RUN(verifier_ld_ind); } void test_verifier_ldsx(void) { RUN(verifier_ldsx); } diff --git a/tools/testing/selftests/bpf/progs/verifier_iterating_callbacks.c b/tools/testing/selftests/bpf/progs/verifier_iterating_callbacks.c new file mode 100644 index 000000000000..fa9429f77a81 --- /dev/null +++ b/tools/testing/selftests/bpf/progs/verifier_iterating_callbacks.c @@ -0,0 +1,147 @@ +// SPDX-License-Identifier: GPL-2.0 + +#include +#include +#include "bpf_misc.h" + +struct { + __uint(type, BPF_MAP_TYPE_ARRAY); + __uint(max_entries, 8); + __type(key, __u32); + __type(value, __u64); +} map SEC(".maps"); + +struct { + __uint(type, BPF_MAP_TYPE_USER_RINGBUF); + __uint(max_entries, 8); +} ringbuf SEC(".maps"); + +struct vm_area_struct; +struct bpf_map; + +struct buf_context { + char *buf; +}; + +struct num_context { + __u64 i; +}; + +__u8 choice_arr[2] = { 0, 1 }; + +static int unsafe_on_2nd_iter_cb(__u32 idx, struct buf_context *ctx) +{ + if (idx == 0) { + ctx->buf = (char *)(0xDEAD); + return 0; + } + + if (bpf_probe_read_user(ctx->buf, 8, (void *)(0xBADC0FFEE))) + return 1; + + return 0; +} + +SEC("?raw_tp") +__failure __msg("R1 type=scalar expected=fp") +int unsafe_on_2nd_iter(void *unused) +{ + char buf[4]; + struct buf_context loop_ctx = { .buf = buf }; + + bpf_loop(100, unsafe_on_2nd_iter_cb, &loop_ctx, 0); + return 0; +} + +static int unsafe_on_zero_iter_cb(__u32 idx, struct num_context *ctx) +{ + ctx->i = 0; + return 0; +} + +SEC("?raw_tp") +__failure __msg("invalid access to map value, value_size=2 off=32 size=1") +int unsafe_on_zero_iter(void *unused) +{ + struct num_context loop_ctx = { .i = 32 }; + + bpf_loop(100, unsafe_on_zero_iter_cb, &loop_ctx, 0); + return choice_arr[loop_ctx.i]; +} + +static int loop_detection_cb(__u32 idx, struct num_context *ctx) +{ + for (;;) {} + return 0; +} + +SEC("?raw_tp") +__failure __msg("infinite loop detected") +int loop_detection(void *unused) +{ + struct num_context loop_ctx = { .i = 0 }; + + bpf_loop(100, loop_detection_cb, &loop_ctx, 0); + return 0; +} + +static __always_inline __u64 oob_state_machine(struct num_context *ctx) +{ + switch (ctx->i) { + case 0: + ctx->i = 1; + break; + case 1: + ctx->i = 32; + break; + } + return 0; +} + +static __u64 for_each_map_elem_cb(struct bpf_map *map, __u32 *key, __u64 *val, void *data) +{ + return oob_state_machine(data); +} + +SEC("?raw_tp") +__failure __msg("invalid access to map value, value_size=2 off=32 size=1") +int unsafe_for_each_map_elem(void *unused) +{ + struct num_context loop_ctx = { .i = 0 }; + + bpf_for_each_map_elem(&map, for_each_map_elem_cb, &loop_ctx, 0); + return choice_arr[loop_ctx.i]; +} + +static __u64 ringbuf_drain_cb(struct bpf_dynptr *dynptr, void *data) +{ + return oob_state_machine(data); +} + +SEC("?raw_tp") +__failure __msg("invalid access to map value, value_size=2 off=32 size=1") +int unsafe_ringbuf_drain(void *unused) +{ + struct num_context loop_ctx = { .i = 0 }; + + bpf_user_ringbuf_drain(&ringbuf, ringbuf_drain_cb, &loop_ctx, 0); + return choice_arr[loop_ctx.i]; +} + +static __u64 find_vma_cb(struct task_struct *task, struct vm_area_struct *vma, void *data) +{ + return oob_state_machine(data); +} + +SEC("?raw_tp") +__failure __msg("invalid access to map value, value_size=2 off=32 size=1") +int unsafe_find_vma(void *unused) +{ + struct task_struct *task = bpf_get_current_task_btf(); + struct num_context loop_ctx = { .i = 0 }; + + bpf_find_vma(task, 0, find_vma_cb, &loop_ctx, 0); + return choice_arr[loop_ctx.i]; +} + +char _license[] SEC("license") = "GPL"; -- cgit v1.2.3 From cafe2c21508a38cdb3ed22708842e957b2572c3e Mon Sep 17 00:00:00 2001 From: Eduard Zingerman Date: Tue, 21 Nov 2023 04:06:58 +0200 Subject: bpf: widening for callback iterators Callbacks are similar to open coded iterators, so add imprecise widening logic for callback body processing. This makes callback based loops behave identically to open coded iterators, e.g. allowing to verify programs like below: struct ctx { u32 i; }; int cb(u32 idx, struct ctx* ctx) { ++ctx->i; return 0; } ... struct ctx ctx = { .i = 0 }; bpf_loop(100, cb, &ctx, 0); ... Acked-by: Andrii Nakryiko Signed-off-by: Eduard Zingerman Link: https://lore.kernel.org/r/20231121020701.26440-9-eddyz87@gmail.com Signed-off-by: Alexei Starovoitov --- kernel/bpf/verifier.c | 24 ++++++++++++++++++++++-- 1 file changed, 22 insertions(+), 2 deletions(-) diff --git a/kernel/bpf/verifier.c b/kernel/bpf/verifier.c index a60dfa56ebb3..2f03e6b11bb9 100644 --- a/kernel/bpf/verifier.c +++ b/kernel/bpf/verifier.c @@ -9799,9 +9799,10 @@ static bool in_rbtree_lock_required_cb(struct bpf_verifier_env *env) static int prepare_func_exit(struct bpf_verifier_env *env, int *insn_idx) { - struct bpf_verifier_state *state = env->cur_state; + struct bpf_verifier_state *state = env->cur_state, *prev_st; struct bpf_func_state *caller, *callee; struct bpf_reg_state *r0; + bool in_callback_fn; int err; callee = state->frame[state->curframe]; @@ -9856,7 +9857,8 @@ static int prepare_func_exit(struct bpf_verifier_env *env, int *insn_idx) * there function call logic would reschedule callback visit. If iteration * converges is_state_visited() would prune that visit eventually. */ - if (callee->in_callback_fn) + in_callback_fn = callee->in_callback_fn; + if (in_callback_fn) *insn_idx = callee->callsite; else *insn_idx = callee->callsite + 1; @@ -9871,6 +9873,24 @@ static int prepare_func_exit(struct bpf_verifier_env *env, int *insn_idx) * bpf_throw, this will be done by copy_verifier_state for extra frames. */ free_func_state(callee); state->frame[state->curframe--] = NULL; + + /* for callbacks widen imprecise scalars to make programs like below verify: + * + * struct ctx { int i; } + * void cb(int idx, struct ctx *ctx) { ctx->i++; ... } + * ... + * struct ctx = { .i = 0; } + * bpf_loop(100, cb, &ctx, 0); + * + * This is similar to what is done in process_iter_next_call() for open + * coded iterators. + */ + prev_st = in_callback_fn ? find_prev_entry(env, state, *insn_idx) : NULL; + if (prev_st) { + err = widen_imprecise_scalars(env, prev_st, state); + if (err) + return err; + } return 0; } -- cgit v1.2.3 From 9f3330aa644d6d979eb064c46e85c62d4b4eac75 Mon Sep 17 00:00:00 2001 From: Eduard Zingerman Date: Tue, 21 Nov 2023 04:06:59 +0200 Subject: selftests/bpf: test widening for iterating callbacks A test case to verify that imprecise scalars widening is applied to callback entering state, when callback call is simulated repeatedly. Signed-off-by: Eduard Zingerman Link: https://lore.kernel.org/r/20231121020701.26440-10-eddyz87@gmail.com Signed-off-by: Alexei Starovoitov --- .../bpf/progs/verifier_iterating_callbacks.c | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) diff --git a/tools/testing/selftests/bpf/progs/verifier_iterating_callbacks.c b/tools/testing/selftests/bpf/progs/verifier_iterating_callbacks.c index fa9429f77a81..598c1e984b26 100644 --- a/tools/testing/selftests/bpf/progs/verifier_iterating_callbacks.c +++ b/tools/testing/selftests/bpf/progs/verifier_iterating_callbacks.c @@ -25,6 +25,7 @@ struct buf_context { struct num_context { __u64 i; + __u64 j; }; __u8 choice_arr[2] = { 0, 1 }; @@ -69,6 +70,25 @@ int unsafe_on_zero_iter(void *unused) return choice_arr[loop_ctx.i]; } +static int widening_cb(__u32 idx, struct num_context *ctx) +{ + ++ctx->i; + return 0; +} + +SEC("?raw_tp") +__success +int widening(void *unused) +{ + struct num_context loop_ctx = { .i = 0, .j = 1 }; + + bpf_loop(100, widening_cb, &loop_ctx, 0); + /* loop_ctx.j is not changed during callback iteration, + * verifier should not apply widening to it. + */ + return choice_arr[loop_ctx.j]; +} + static int loop_detection_cb(__u32 idx, struct num_context *ctx) { for (;;) {} -- cgit v1.2.3 From bb124da69c47dd98d69361ec13244ece50bec63e Mon Sep 17 00:00:00 2001 From: Eduard Zingerman Date: Tue, 21 Nov 2023 04:07:00 +0200 Subject: bpf: keep track of max number of bpf_loop callback iterations In some cases verifier can't infer convergence of the bpf_loop() iteration. E.g. for the following program: static int cb(__u32 idx, struct num_context* ctx) { ctx->i++; return 0; } SEC("?raw_tp") int prog(void *_) { struct num_context ctx = { .i = 0 }; __u8 choice_arr[2] = { 0, 1 }; bpf_loop(2, cb, &ctx, 0); return choice_arr[ctx.i]; } Each 'cb' simulation would eventually return to 'prog' and reach 'return choice_arr[ctx.i]' statement. At which point ctx.i would be marked precise, thus forcing verifier to track multitude of separate states with {.i=0}, {.i=1}, ... at bpf_loop() callback entry. This commit allows "brute force" handling for such cases by limiting number of callback body simulations using 'umax' value of the first bpf_loop() parameter. For this, extend bpf_func_state with 'callback_depth' field. Increment this field when callback visiting state is pushed to states traversal stack. For frame #N it's 'callback_depth' field counts how many times callback with frame depth N+1 had been executed. Use bpf_func_state specifically to allow independent tracking of callback depths when multiple nested bpf_loop() calls are present. Signed-off-by: Eduard Zingerman Link: https://lore.kernel.org/r/20231121020701.26440-11-eddyz87@gmail.com Signed-off-by: Alexei Starovoitov --- include/linux/bpf_verifier.h | 11 +++++++ kernel/bpf/verifier.c | 19 ++++++++++-- .../bpf/progs/verifier_subprog_precision.c | 35 +++++++++++++++------- 3 files changed, 53 insertions(+), 12 deletions(-) diff --git a/include/linux/bpf_verifier.h b/include/linux/bpf_verifier.h index dd326936dd6f..aa4d19d0bc94 100644 --- a/include/linux/bpf_verifier.h +++ b/include/linux/bpf_verifier.h @@ -301,6 +301,17 @@ struct bpf_func_state { struct tnum callback_ret_range; bool in_async_callback_fn; bool in_exception_callback_fn; + /* For callback calling functions that limit number of possible + * callback executions (e.g. bpf_loop) keeps track of current + * simulated iteration number. + * Value in frame N refers to number of times callback with frame + * N+1 was simulated, e.g. for the following call: + * + * bpf_loop(..., fn, ...); | suppose current frame is N + * | fn would be simulated in frame N+1 + * | number of simulations is tracked in frame N + */ + u32 callback_depth; /* The following fields should be last. See copy_func_state() */ int acquired_refs; diff --git a/kernel/bpf/verifier.c b/kernel/bpf/verifier.c index 2f03e6b11bb9..af2819d5c8ee 100644 --- a/kernel/bpf/verifier.c +++ b/kernel/bpf/verifier.c @@ -9505,6 +9505,8 @@ static int push_callback_call(struct bpf_verifier_env *env, struct bpf_insn *ins return err; callback_state->callback_unroll_depth++; + callback_state->frame[callback_state->curframe - 1]->callback_depth++; + caller->callback_depth = 0; return 0; } @@ -10309,8 +10311,21 @@ static int check_helper_call(struct bpf_verifier_env *env, struct bpf_insn *insn break; case BPF_FUNC_loop: update_loop_inline_state(env, meta.subprogno); - err = push_callback_call(env, insn, insn_idx, meta.subprogno, - set_loop_callback_state); + /* Verifier relies on R1 value to determine if bpf_loop() iteration + * is finished, thus mark it precise. + */ + err = mark_chain_precision(env, BPF_REG_1); + if (err) + return err; + if (cur_func(env)->callback_depth < regs[BPF_REG_1].umax_value) { + err = push_callback_call(env, insn, insn_idx, meta.subprogno, + set_loop_callback_state); + } else { + cur_func(env)->callback_depth = 0; + if (env->log.level & BPF_LOG_LEVEL2) + verbose(env, "frame%d bpf_loop iteration limit reached\n", + env->cur_state->curframe); + } break; case BPF_FUNC_dynptr_from_mem: if (regs[BPF_REG_1].type != PTR_TO_MAP_VALUE) { diff --git a/tools/testing/selftests/bpf/progs/verifier_subprog_precision.c b/tools/testing/selftests/bpf/progs/verifier_subprog_precision.c index da803cffb5ef..f61d623b1ce8 100644 --- a/tools/testing/selftests/bpf/progs/verifier_subprog_precision.c +++ b/tools/testing/selftests/bpf/progs/verifier_subprog_precision.c @@ -119,7 +119,23 @@ __naked int global_subprog_result_precise(void) SEC("?raw_tp") __success __log_level(2) -/* First simulated path does not include callback body */ +/* First simulated path does not include callback body, + * r1 and r4 are always precise for bpf_loop() calls. + */ +__msg("9: (85) call bpf_loop#181") +__msg("mark_precise: frame0: last_idx 9 first_idx 9 subseq_idx -1") +__msg("mark_precise: frame0: parent state regs=r4 stack=:") +__msg("mark_precise: frame0: last_idx 8 first_idx 0 subseq_idx 9") +__msg("mark_precise: frame0: regs=r4 stack= before 8: (b7) r4 = 0") +__msg("mark_precise: frame0: last_idx 9 first_idx 9 subseq_idx -1") +__msg("mark_precise: frame0: parent state regs=r1 stack=:") +__msg("mark_precise: frame0: last_idx 8 first_idx 0 subseq_idx 9") +__msg("mark_precise: frame0: regs=r1 stack= before 8: (b7) r4 = 0") +__msg("mark_precise: frame0: regs=r1 stack= before 7: (b7) r3 = 0") +__msg("mark_precise: frame0: regs=r1 stack= before 6: (bf) r2 = r8") +__msg("mark_precise: frame0: regs=r1 stack= before 5: (bf) r1 = r6") +__msg("mark_precise: frame0: regs=r6 stack= before 4: (b7) r6 = 3") +/* r6 precision propagation */ __msg("14: (0f) r1 += r6") __msg("mark_precise: frame0: last_idx 14 first_idx 9") __msg("mark_precise: frame0: regs=r6 stack= before 13: (bf) r1 = r7") @@ -134,10 +150,9 @@ __msg("17: (b7) r0 = 0") __msg("18: (95) exit") __msg("returning from callee:") __msg("to caller at 9:") -/* r4 (flags) is always precise for bpf_loop() */ -__msg("frame 0: propagating r4") +__msg("frame 0: propagating r1,r4") __msg("mark_precise: frame0: last_idx 9 first_idx 9 subseq_idx -1") -__msg("mark_precise: frame0: regs=r4 stack= before 18: (95) exit") +__msg("mark_precise: frame0: regs=r1,r4 stack= before 18: (95) exit") __msg("from 18 to 9: safe") __naked int callback_result_precise(void) { @@ -264,12 +279,12 @@ __msg("15: (b7) r0 = 0") __msg("16: (95) exit") __msg("returning from callee:") __msg("to caller at 9:") -/* r4 (flags) is always precise for bpf_loop(), +/* r1, r4 are always precise for bpf_loop(), * r6 was marked before backtracking to callback body. */ -__msg("frame 0: propagating r4,r6") +__msg("frame 0: propagating r1,r4,r6") __msg("mark_precise: frame0: last_idx 9 first_idx 9 subseq_idx -1") -__msg("mark_precise: frame0: regs=r4,r6 stack= before 16: (95) exit") +__msg("mark_precise: frame0: regs=r1,r4,r6 stack= before 16: (95) exit") __msg("mark_precise: frame1: regs= stack= before 15: (b7) r0 = 0") __msg("mark_precise: frame1: regs= stack= before 9: (85) call bpf_loop") __msg("mark_precise: frame0: parent state regs= stack=:") @@ -422,12 +437,12 @@ __msg("17: (b7) r0 = 0") __msg("18: (95) exit") __msg("returning from callee:") __msg("to caller at 10:") -/* r4 (flags) is always precise for bpf_loop(), +/* r1, r4 are always precise for bpf_loop(), * fp-8 was marked before backtracking to callback body. */ -__msg("frame 0: propagating r4,fp-8") +__msg("frame 0: propagating r1,r4,fp-8") __msg("mark_precise: frame0: last_idx 10 first_idx 10 subseq_idx -1") -__msg("mark_precise: frame0: regs=r4 stack=-8 before 18: (95) exit") +__msg("mark_precise: frame0: regs=r1,r4 stack=-8 before 18: (95) exit") __msg("mark_precise: frame1: regs= stack= before 17: (b7) r0 = 0") __msg("mark_precise: frame1: regs= stack= before 10: (85) call bpf_loop#181") __msg("mark_precise: frame0: parent state regs= stack=:") -- cgit v1.2.3 From 57e2a52deeb12ab84c15c6d0fb93638b5b94001b Mon Sep 17 00:00:00 2001 From: Eduard Zingerman Date: Tue, 21 Nov 2023 04:07:01 +0200 Subject: selftests/bpf: check if max number of bpf_loop iterations is tracked Check that even if bpf_loop() callback simulation does not converge to a specific state, verification could proceed via "brute force" simulation of maximal number of callback calls. Signed-off-by: Eduard Zingerman Link: https://lore.kernel.org/r/20231121020701.26440-12-eddyz87@gmail.com Signed-off-by: Alexei Starovoitov --- .../bpf/progs/verifier_iterating_callbacks.c | 75 ++++++++++++++++++++++ 1 file changed, 75 insertions(+) diff --git a/tools/testing/selftests/bpf/progs/verifier_iterating_callbacks.c b/tools/testing/selftests/bpf/progs/verifier_iterating_callbacks.c index 598c1e984b26..5905e036e0ea 100644 --- a/tools/testing/selftests/bpf/progs/verifier_iterating_callbacks.c +++ b/tools/testing/selftests/bpf/progs/verifier_iterating_callbacks.c @@ -164,4 +164,79 @@ int unsafe_find_vma(void *unused) return choice_arr[loop_ctx.i]; } +static int iter_limit_cb(__u32 idx, struct num_context *ctx) +{ + ctx->i++; + return 0; +} + +SEC("?raw_tp") +__success +int bpf_loop_iter_limit_ok(void *unused) +{ + struct num_context ctx = { .i = 0 }; + + bpf_loop(1, iter_limit_cb, &ctx, 0); + return choice_arr[ctx.i]; +} + +SEC("?raw_tp") +__failure __msg("invalid access to map value, value_size=2 off=2 size=1") +int bpf_loop_iter_limit_overflow(void *unused) +{ + struct num_context ctx = { .i = 0 }; + + bpf_loop(2, iter_limit_cb, &ctx, 0); + return choice_arr[ctx.i]; +} + +static int iter_limit_level2a_cb(__u32 idx, struct num_context *ctx) +{ + ctx->i += 100; + return 0; +} + +static int iter_limit_level2b_cb(__u32 idx, struct num_context *ctx) +{ + ctx->i += 10; + return 0; +} + +static int iter_limit_level1_cb(__u32 idx, struct num_context *ctx) +{ + ctx->i += 1; + bpf_loop(1, iter_limit_level2a_cb, ctx, 0); + bpf_loop(1, iter_limit_level2b_cb, ctx, 0); + return 0; +} + +/* Check that path visiting every callback function once had been + * reached by verifier. Variables 'ctx{1,2}i' below serve as flags, + * with each decimal digit corresponding to a callback visit marker. + */ +SEC("socket") +__success __retval(111111) +int bpf_loop_iter_limit_nested(void *unused) +{ + struct num_context ctx1 = { .i = 0 }; + struct num_context ctx2 = { .i = 0 }; + __u64 a, b, c; + + bpf_loop(1, iter_limit_level1_cb, &ctx1, 0); + bpf_loop(1, iter_limit_level1_cb, &ctx2, 0); + a = ctx1.i; + b = ctx2.i; + /* Force 'ctx1.i' and 'ctx2.i' precise. */ + c = choice_arr[(a + b) % 2]; + /* This makes 'c' zero, but neither clang nor verifier know it. */ + c /= 10; + /* Make sure that verifier does not visit 'impossible' states: + * enumerate all possible callback visit masks. + */ + if (a != 0 && a != 1 && a != 11 && a != 101 && a != 111 && + b != 0 && b != 1 && b != 11 && b != 101 && b != 111) + asm volatile ("r0 /= 0;" ::: "r0"); + return 1000 * a + b + c; +} + char _license[] SEC("license") = "GPL"; -- cgit v1.2.3 From d3ec75bc635cb0cb8185b63293d33a3d1b942d22 Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Tue, 21 Nov 2023 15:03:25 +0800 Subject: LoongArch: Add dependency between vmlinuz.efi and vmlinux.efi MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit A common issue in Makefile is a race in parallel building. You need to be careful to prevent multiple threads from writing to the same file simultaneously. Commit 3939f3345050 ("ARM: 8418/1: add boot image dependencies to not generate invalid images") addressed such a bad scenario. A similar symptom occurs with the following command: $ make -j$(nproc) ARCH=loongarch vmlinux.efi vmlinuz.efi [ snip ] SORTTAB vmlinux OBJCOPY arch/loongarch/boot/vmlinux.efi OBJCOPY arch/loongarch/boot/vmlinux.efi PAD arch/loongarch/boot/vmlinux.bin GZIP arch/loongarch/boot/vmlinuz OBJCOPY arch/loongarch/boot/vmlinuz.o LD arch/loongarch/boot/vmlinuz.efi.elf OBJCOPY arch/loongarch/boot/vmlinuz.efi The log "OBJCOPY arch/loongarch/boot/vmlinux.efi" is displayed twice. It indicates that two threads simultaneously enter arch/loongarch/boot/ and write to arch/loongarch/boot/vmlinux.efi. It occasionally leads to a build failure: $ make -j$(nproc) ARCH=loongarch vmlinux.efi vmlinuz.efi [ snip ] SORTTAB vmlinux OBJCOPY arch/loongarch/boot/vmlinux.efi PAD arch/loongarch/boot/vmlinux.bin truncate: Invalid number: ‘arch/loongarch/boot/vmlinux.bin’ make[2]: *** [drivers/firmware/efi/libstub/Makefile.zboot:13: arch/loongarch/boot/vmlinux.bin] Error 1 make[2]: *** Deleting file 'arch/loongarch/boot/vmlinux.bin' make[1]: *** [arch/loongarch/Makefile:146: vmlinuz.efi] Error 2 make[1]: *** Waiting for unfinished jobs.... make: *** [Makefile:234: __sub-make] Error 2 vmlinuz.efi depends on vmlinux.efi, but such a dependency is not specified in arch/loongarch/Makefile. Signed-off-by: Masahiro Yamada Signed-off-by: Huacai Chen --- arch/loongarch/Makefile | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/loongarch/Makefile b/arch/loongarch/Makefile index 9eeb0c05f3f4..a8d65eaf1211 100644 --- a/arch/loongarch/Makefile +++ b/arch/loongarch/Makefile @@ -142,6 +142,8 @@ vdso-install-y += arch/loongarch/vdso/vdso.so.dbg all: $(notdir $(KBUILD_IMAGE)) +vmlinuz.efi: vmlinux.efi + vmlinux.elf vmlinux.efi vmlinuz.efi: vmlinux $(Q)$(MAKE) $(build)=$(boot) $(bootvars-y) $(boot)/$@ -- cgit v1.2.3 From cbfd44bd5c6eec0aada0c39130f0b8d7ecba0529 Mon Sep 17 00:00:00 2001 From: WANG Rui Date: Tue, 21 Nov 2023 15:03:25 +0800 Subject: LoongArch: Explicitly set -fdirect-access-external-data for vmlinux After this llvm commit [1], The -fno-pic does not imply direct access external data. Explicitly set -fdirect-access-external-data for vmlinux that can avoids GOT entries. Link: https://github.com/llvm/llvm-project/commit/47eeee297775347cbdb7624d6a766c2a3eec4a59 Suggested-by: Xi Ruoyao Signed-off-by: WANG Rui Signed-off-by: Huacai Chen --- arch/loongarch/Makefile | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/loongarch/Makefile b/arch/loongarch/Makefile index a8d65eaf1211..204b94b2e6aa 100644 --- a/arch/loongarch/Makefile +++ b/arch/loongarch/Makefile @@ -68,6 +68,7 @@ LDFLAGS_vmlinux += -static -n -nostdlib ifdef CONFIG_AS_HAS_EXPLICIT_RELOCS cflags-y += $(call cc-option,-mexplicit-relocs) KBUILD_CFLAGS_KERNEL += $(call cc-option,-mdirect-extern-access) +KBUILD_CFLAGS_KERNEL += $(call cc-option,-fdirect-access-external-data) KBUILD_AFLAGS_MODULE += $(call cc-option,-fno-direct-access-external-data) KBUILD_CFLAGS_MODULE += $(call cc-option,-fno-direct-access-external-data) KBUILD_AFLAGS_MODULE += $(call cc-option,-mno-relax) $(call cc-option,-Wa$(comma)-mno-relax) -- cgit v1.2.3 From aa0cbc1b506b090c3a775b547c693ada108cc0d7 Mon Sep 17 00:00:00 2001 From: WANG Rui Date: Tue, 21 Nov 2023 15:03:25 +0800 Subject: LoongArch: Record pc instead of offset in la_abs relocation To clarify, the previous version functioned flawlessly. However, it's worth noting that the LLVM's LoongArch backend currently lacks support for cross-section label calculations. With this patch, we enable the use of clang to compile relocatable kernels. Tested-by: Nathan Chancellor Signed-off-by: WANG Rui Signed-off-by: Huacai Chen --- arch/loongarch/include/asm/asmmacro.h | 3 +-- arch/loongarch/include/asm/setup.h | 2 +- arch/loongarch/kernel/relocate.c | 2 +- 3 files changed, 3 insertions(+), 4 deletions(-) diff --git a/arch/loongarch/include/asm/asmmacro.h b/arch/loongarch/include/asm/asmmacro.h index c9544f358c33..655db7d7a427 100644 --- a/arch/loongarch/include/asm/asmmacro.h +++ b/arch/loongarch/include/asm/asmmacro.h @@ -609,8 +609,7 @@ lu32i.d \reg, 0 lu52i.d \reg, \reg, 0 .pushsection ".la_abs", "aw", %progbits - 768: - .dword 768b-766b + .dword 766b .dword \sym .popsection #endif diff --git a/arch/loongarch/include/asm/setup.h b/arch/loongarch/include/asm/setup.h index a0bc159ce8bd..ee52fb1e9963 100644 --- a/arch/loongarch/include/asm/setup.h +++ b/arch/loongarch/include/asm/setup.h @@ -25,7 +25,7 @@ extern void set_merr_handler(unsigned long offset, void *addr, unsigned long len #ifdef CONFIG_RELOCATABLE struct rela_la_abs { - long offset; + long pc; long symvalue; }; diff --git a/arch/loongarch/kernel/relocate.c b/arch/loongarch/kernel/relocate.c index 6c3eff9af9fb..288b739ca88d 100644 --- a/arch/loongarch/kernel/relocate.c +++ b/arch/loongarch/kernel/relocate.c @@ -52,7 +52,7 @@ static inline void __init relocate_absolute(long random_offset) for (p = begin; (void *)p < end; p++) { long v = p->symvalue; uint32_t lu12iw, ori, lu32id, lu52id; - union loongarch_instruction *insn = (void *)p - p->offset; + union loongarch_instruction *insn = (void *)p->pc; lu12iw = (v >> 12) & 0xfffff; ori = v & 0xfff; -- cgit v1.2.3 From ee2daf7102f42007b7bf5dbd1ae76478ee62c512 Mon Sep 17 00:00:00 2001 From: Huacai Chen Date: Tue, 21 Nov 2023 15:03:25 +0800 Subject: LoongArch: Add __percpu annotation for __percpu_read()/__percpu_write() When build kernel with C=1, we get: arch/loongarch/kernel/process.c:234:46: warning: incorrect type in argument 1 (different address spaces) arch/loongarch/kernel/process.c:234:46: expected void *ptr arch/loongarch/kernel/process.c:234:46: got unsigned long [noderef] __percpu * arch/loongarch/kernel/process.c:234:46: warning: incorrect type in argument 1 (different address spaces) arch/loongarch/kernel/process.c:234:46: expected void *ptr arch/loongarch/kernel/process.c:234:46: got unsigned long [noderef] __percpu * arch/loongarch/kernel/process.c:234:46: warning: incorrect type in argument 1 (different address spaces) arch/loongarch/kernel/process.c:234:46: expected void *ptr arch/loongarch/kernel/process.c:234:46: got unsigned long [noderef] __percpu * arch/loongarch/kernel/process.c:234:46: warning: incorrect type in argument 1 (different address spaces) arch/loongarch/kernel/process.c:234:46: expected void *ptr arch/loongarch/kernel/process.c:234:46: got unsigned long [noderef] __percpu * Add __percpu annotation for __percpu_read()/__percpu_write() can avoid such warnings. __percpu_xchg() and other functions don't need annotation because their wrapper, i.e. _pcp_protect(), already suppresses warnings. Also adjust the indentations in this file. Reported-by: kernel test robot Closes: https://lore.kernel.org/oe-kbuild-all/202311080409.LlOfTR3m-lkp@intel.com/ Closes: https://lore.kernel.org/oe-kbuild-all/202311080840.Vc2kXhfp-lkp@intel.com/ Closes: https://lore.kernel.org/oe-kbuild-all/202311081340.3k72KKdg-lkp@intel.com/ Closes: https://lore.kernel.org/oe-kbuild-all/202311120926.cjYHyoYw-lkp@intel.com/ Closes: https://lore.kernel.org/oe-kbuild-all/202311152142.g6UyNx1R-lkp@intel.com/ Closes: https://lore.kernel.org/oe-kbuild-all/202311160339.DbhaH8LX-lkp@intel.com/ Closes: https://lore.kernel.org/oe-kbuild-all/202311181454.CTPrSYmQ-lkp@intel.com/ Signed-off-by: Huacai Chen --- arch/loongarch/include/asm/percpu.h | 11 +++++------ 1 file changed, 5 insertions(+), 6 deletions(-) diff --git a/arch/loongarch/include/asm/percpu.h b/arch/loongarch/include/asm/percpu.h index ed5da02b1cf6..9b36ac003f89 100644 --- a/arch/loongarch/include/asm/percpu.h +++ b/arch/loongarch/include/asm/percpu.h @@ -40,13 +40,13 @@ static __always_inline unsigned long __percpu_##op(void *ptr, \ switch (size) { \ case 4: \ __asm__ __volatile__( \ - "am"#asm_op".w" " %[ret], %[val], %[ptr] \n" \ + "am"#asm_op".w" " %[ret], %[val], %[ptr] \n" \ : [ret] "=&r" (ret), [ptr] "+ZB"(*(u32 *)ptr) \ : [val] "r" (val)); \ break; \ case 8: \ __asm__ __volatile__( \ - "am"#asm_op".d" " %[ret], %[val], %[ptr] \n" \ + "am"#asm_op".d" " %[ret], %[val], %[ptr] \n" \ : [ret] "=&r" (ret), [ptr] "+ZB"(*(u64 *)ptr) \ : [val] "r" (val)); \ break; \ @@ -63,7 +63,7 @@ PERCPU_OP(and, and, &) PERCPU_OP(or, or, |) #undef PERCPU_OP -static __always_inline unsigned long __percpu_read(void *ptr, int size) +static __always_inline unsigned long __percpu_read(void __percpu *ptr, int size) { unsigned long ret; @@ -100,7 +100,7 @@ static __always_inline unsigned long __percpu_read(void *ptr, int size) return ret; } -static __always_inline void __percpu_write(void *ptr, unsigned long val, int size) +static __always_inline void __percpu_write(void __percpu *ptr, unsigned long val, int size) { switch (size) { case 1: @@ -132,8 +132,7 @@ static __always_inline void __percpu_write(void *ptr, unsigned long val, int siz } } -static __always_inline unsigned long __percpu_xchg(void *ptr, unsigned long val, - int size) +static __always_inline unsigned long __percpu_xchg(void *ptr, unsigned long val, int size) { switch (size) { case 1: -- cgit v1.2.3 From 902d75cdf0cf0a3fb58550089ee519abf12566f5 Mon Sep 17 00:00:00 2001 From: Huacai Chen Date: Tue, 21 Nov 2023 15:03:25 +0800 Subject: LoongArch: Silence the boot warning about 'nokaslr' The kernel parameter 'nokaslr' is handled before start_kernel(), so we don't need early_param() to mark it technically. But it can cause a boot warning as follows: Unknown kernel command line parameters "nokaslr", will be passed to user space. When we use 'init=/bin/bash', 'nokaslr' which passed to user space will even cause a kernel panic. So we use early_param() to mark 'nokaslr', simply print a notice and silence the boot warning (also fix a potential panic). This logic is similar to RISC-V. Signed-off-by: Huacai Chen --- arch/loongarch/kernel/relocate.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/arch/loongarch/kernel/relocate.c b/arch/loongarch/kernel/relocate.c index 288b739ca88d..1acfa704c8d0 100644 --- a/arch/loongarch/kernel/relocate.c +++ b/arch/loongarch/kernel/relocate.c @@ -102,6 +102,14 @@ static inline __init unsigned long get_random_boot(void) return hash; } +static int __init nokaslr(char *p) +{ + pr_info("KASLR is disabled.\n"); + + return 0; /* Print a notice and silence the boot warning */ +} +early_param("nokaslr", nokaslr); + static inline __init bool kaslr_disabled(void) { char *str; -- cgit v1.2.3 From 19d86a496233731882aea7ec24505ce6641b1c0c Mon Sep 17 00:00:00 2001 From: Huacai Chen Date: Tue, 21 Nov 2023 15:03:25 +0800 Subject: LoongArch: Mark {dmw,tlb}_virt_to_page() exports as non-GPL Mark {dmw,tlb}_virt_to_page() exports as non-GPL, in order to let out-of-tree modules (e.g. OpenZFS) be built without errors. Otherwise we get: ERROR: modpost: GPL-incompatible module zfs.ko uses GPL-only symbol 'dmw_virt_to_page' ERROR: modpost: GPL-incompatible module zfs.ko uses GPL-only symbol 'tlb_virt_to_page' Reported-by: Haowu Ge Signed-off-by: Huacai Chen --- arch/loongarch/mm/pgtable.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/loongarch/mm/pgtable.c b/arch/loongarch/mm/pgtable.c index 71d0539e2d0b..2aae72e63871 100644 --- a/arch/loongarch/mm/pgtable.c +++ b/arch/loongarch/mm/pgtable.c @@ -13,13 +13,13 @@ struct page *dmw_virt_to_page(unsigned long kaddr) { return pfn_to_page(virt_to_pfn(kaddr)); } -EXPORT_SYMBOL_GPL(dmw_virt_to_page); +EXPORT_SYMBOL(dmw_virt_to_page); struct page *tlb_virt_to_page(unsigned long kaddr) { return pfn_to_page(pte_pfn(*virt_to_kpte(kaddr))); } -EXPORT_SYMBOL_GPL(tlb_virt_to_page); +EXPORT_SYMBOL(tlb_virt_to_page); pgd_t *pgd_alloc(struct mm_struct *mm) { -- cgit v1.2.3 From d43f37b73468c172bc89ac4824a1511b411f0778 Mon Sep 17 00:00:00 2001 From: Bibo Mao Date: Tue, 21 Nov 2023 15:03:25 +0800 Subject: LoongArch: Implement constant timer shutdown interface When a cpu is hot-unplugged, it is put in idle state and the function arch_cpu_idle_dead() is called. The timer interrupt for this processor should be disabled, otherwise there will be pending timer interrupt for the unplugged cpu, so that vcpu is prevented from giving up scheduling when system is running in vm mode. This patch implements the timer shutdown interface so that the constant timer will be properly disabled when a CPU is hot-unplugged. Reviewed-by: WANG Xuerui Signed-off-by: Bibo Mao Signed-off-by: Huacai Chen --- arch/loongarch/kernel/time.c | 23 +++++++++-------------- 1 file changed, 9 insertions(+), 14 deletions(-) diff --git a/arch/loongarch/kernel/time.c b/arch/loongarch/kernel/time.c index 3064af94db9c..e7015f7b70e3 100644 --- a/arch/loongarch/kernel/time.c +++ b/arch/loongarch/kernel/time.c @@ -58,14 +58,16 @@ static int constant_set_state_oneshot(struct clock_event_device *evt) return 0; } -static int constant_set_state_oneshot_stopped(struct clock_event_device *evt) +static int constant_set_state_periodic(struct clock_event_device *evt) { + unsigned long period; unsigned long timer_config; raw_spin_lock(&state_lock); - timer_config = csr_read64(LOONGARCH_CSR_TCFG); - timer_config &= ~CSR_TCFG_EN; + period = const_clock_freq / HZ; + timer_config = period & CSR_TCFG_VAL; + timer_config |= (CSR_TCFG_PERIOD | CSR_TCFG_EN); csr_write64(timer_config, LOONGARCH_CSR_TCFG); raw_spin_unlock(&state_lock); @@ -73,16 +75,14 @@ static int constant_set_state_oneshot_stopped(struct clock_event_device *evt) return 0; } -static int constant_set_state_periodic(struct clock_event_device *evt) +static int constant_set_state_shutdown(struct clock_event_device *evt) { - unsigned long period; unsigned long timer_config; raw_spin_lock(&state_lock); - period = const_clock_freq / HZ; - timer_config = period & CSR_TCFG_VAL; - timer_config |= (CSR_TCFG_PERIOD | CSR_TCFG_EN); + timer_config = csr_read64(LOONGARCH_CSR_TCFG); + timer_config &= ~CSR_TCFG_EN; csr_write64(timer_config, LOONGARCH_CSR_TCFG); raw_spin_unlock(&state_lock); @@ -90,11 +90,6 @@ static int constant_set_state_periodic(struct clock_event_device *evt) return 0; } -static int constant_set_state_shutdown(struct clock_event_device *evt) -{ - return 0; -} - static int constant_timer_next_event(unsigned long delta, struct clock_event_device *evt) { unsigned long timer_config; @@ -161,7 +156,7 @@ int constant_clockevent_init(void) cd->rating = 320; cd->cpumask = cpumask_of(cpu); cd->set_state_oneshot = constant_set_state_oneshot; - cd->set_state_oneshot_stopped = constant_set_state_oneshot_stopped; + cd->set_state_oneshot_stopped = constant_set_state_shutdown; cd->set_state_periodic = constant_set_state_periodic; cd->set_state_shutdown = constant_set_state_shutdown; cd->set_next_event = constant_timer_next_event; -- cgit v1.2.3 From 10301780c96e70b694eca86a3ccfa1893a4a6d3e Mon Sep 17 00:00:00 2001 From: Yanteng Si Date: Tue, 21 Nov 2023 15:03:25 +0800 Subject: Docs/LoongArch: Update links in LoongArch introduction.rst LoongArch-Vol1 has been updated to v1.10, the links in the documentation are out of date, let's update it. Signed-off-by: Yanteng Si Signed-off-by: Huacai Chen --- Documentation/arch/loongarch/introduction.rst | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/Documentation/arch/loongarch/introduction.rst b/Documentation/arch/loongarch/introduction.rst index 8c568cfc2107..5e6db78abeaf 100644 --- a/Documentation/arch/loongarch/introduction.rst +++ b/Documentation/arch/loongarch/introduction.rst @@ -375,9 +375,9 @@ Developer web site of Loongson and LoongArch (Software and Documentation): Documentation of LoongArch ISA: - https://github.com/loongson/LoongArch-Documentation/releases/latest/download/LoongArch-Vol1-v1.02-CN.pdf (in Chinese) + https://github.com/loongson/LoongArch-Documentation/releases/latest/download/LoongArch-Vol1-v1.10-CN.pdf (in Chinese) - https://github.com/loongson/LoongArch-Documentation/releases/latest/download/LoongArch-Vol1-v1.02-EN.pdf (in English) + https://github.com/loongson/LoongArch-Documentation/releases/latest/download/LoongArch-Vol1-v1.10-EN.pdf (in English) Documentation of LoongArch ELF psABI: -- cgit v1.2.3 From c517fd2738f472eb0d1db60a70d91629349a9bf8 Mon Sep 17 00:00:00 2001 From: Yanteng Si Date: Tue, 21 Nov 2023 15:03:26 +0800 Subject: Docs/zh_CN/LoongArch: Update links in LoongArch introduction.rst LoongArch-Vol1 has been updated to v1.10, the links in the documentation are out of date, let's update it. Signed-off-by: Yanteng Si Signed-off-by: Huacai Chen --- Documentation/translations/zh_CN/arch/loongarch/introduction.rst | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/Documentation/translations/zh_CN/arch/loongarch/introduction.rst b/Documentation/translations/zh_CN/arch/loongarch/introduction.rst index 59d6bf33050c..bf463c5a4c51 100644 --- a/Documentation/translations/zh_CN/arch/loongarch/introduction.rst +++ b/Documentation/translations/zh_CN/arch/loongarch/introduction.rst @@ -338,9 +338,9 @@ Loongson与LoongArch的开发者网站（软件与文档资源）： LoongArch指令集架构的文档： - https://github.com/loongson/LoongArch-Documentation/releases/latest/download/LoongArch-Vol1-v1.02-CN.pdf （中文版） + https://github.com/loongson/LoongArch-Documentation/releases/latest/download/LoongArch-Vol1-v1.10-CN.pdf （中文版） - https://github.com/loongson/LoongArch-Documentation/releases/latest/download/LoongArch-Vol1-v1.02-EN.pdf （英文版） + https://github.com/loongson/LoongArch-Documentation/releases/latest/download/LoongArch-Vol1-v1.10-EN.pdf （英文版） LoongArch的ELF psABI文档： -- cgit v1.2.3 From 8d9ce3e53bbd2d6241213e9a4deb310499c929ff Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Mon, 20 Nov 2023 16:45:45 +0100 Subject: MAINTAINERS: Drop Mark Gross as maintainer for x86 platform drivers MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Mark has not really been active as maintainer for x86 platform drivers lately, drop Mark from the MAINTAINERS entries for drivers/platform/x86, drivers/platform/mellanox and drivers/platform/surface. Cc: Mark Gross Signed-off-by: Hans de Goede Acked-by: Andy Shevchenko Link: https://lore.kernel.org/r/20231120154548.611041-1-hdegoede@redhat.com Signed-off-by: Ilpo Järvinen --- MAINTAINERS | 3 --- 1 file changed, 3 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index 0666ddb65552..e972ce5f54e7 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -13778,7 +13778,6 @@ F: drivers/net/ethernet/mellanox/mlxfw/ MELLANOX HARDWARE PLATFORM SUPPORT M: Hans de Goede M: Ilpo Järvinen -M: Mark Gross M: Vadim Pasternak L: platform-driver-x86@vger.kernel.org S: Supported @@ -14387,7 +14386,6 @@ F: drivers/platform/surface/surface_gpe.c MICROSOFT SURFACE HARDWARE PLATFORM SUPPORT M: Hans de Goede M: Ilpo Järvinen -M: Mark Gross M: Maximilian Luz L: platform-driver-x86@vger.kernel.org S: Maintained @@ -23653,7 +23651,6 @@ F: drivers/platform/x86/x86-android-tablets/ X86 PLATFORM DRIVERS M: Hans de Goede M: Ilpo Järvinen -M: Mark Gross L: platform-driver-x86@vger.kernel.org S: Maintained Q: https://patchwork.kernel.org/project/platform-driver-x86/list/ -- cgit v1.2.3 From a6584711e64d9d12ab79a450ec3628fd35e4f476 Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Mon, 20 Nov 2023 17:07:56 +0200 Subject: platform/x86: intel_telemetry: Fix kernel doc descriptions MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit LKP found issues with a kernel doc in the driver: core.c:116: warning: Function parameter or member 'ioss_evtconfig' not described in 'telemetry_update_events' core.c:188: warning: Function parameter or member 'ioss_evtconfig' not described in 'telemetry_get_eventconfig' It looks like it were copy'n'paste typos when these descriptions had been introduced. Fix the typos. Reported-by: kernel test robot Closes: https://lore.kernel.org/oe-kbuild-all/202310070743.WALmRGSY-lkp@intel.com/ Signed-off-by: Andy Shevchenko Link: https://lore.kernel.org/r/20231120150756.1661425-1-andriy.shevchenko@linux.intel.com Reviewed-by: Rajneesh Bhardwaj Reviewed-by: Ilpo Järvinen Signed-off-by: Ilpo Järvinen --- drivers/platform/x86/intel/telemetry/core.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/platform/x86/intel/telemetry/core.c b/drivers/platform/x86/intel/telemetry/core.c index fdf55b5d6948..e4be40f73eeb 100644 --- a/drivers/platform/x86/intel/telemetry/core.c +++ b/drivers/platform/x86/intel/telemetry/core.c @@ -102,7 +102,7 @@ static const struct telemetry_core_ops telm_defpltops = { /** * telemetry_update_events() - Update telemetry Configuration * @pss_evtconfig: PSS related config. No change if num_evts = 0. - * @pss_evtconfig: IOSS related config. No change if num_evts = 0. + * @ioss_evtconfig: IOSS related config. No change if num_evts = 0. * * This API updates the IOSS & PSS Telemetry configuration. Old config * is overwritten. Call telemetry_reset_events when logging is over @@ -176,7 +176,7 @@ EXPORT_SYMBOL_GPL(telemetry_reset_events); /** * telemetry_get_eventconfig() - Returns the pss and ioss events enabled * @pss_evtconfig: Pointer to PSS related configuration. - * @pss_evtconfig: Pointer to IOSS related configuration. + * @ioss_evtconfig: Pointer to IOSS related configuration. * @pss_len: Number of u32 elements allocated for pss_evtconfig array * @ioss_len: Number of u32 elements allocated for ioss_evtconfig array * -- cgit v1.2.3 From 3f7c0634926daf48cd2f6db6c1197a1047074088 Mon Sep 17 00:00:00 2001 From: Jacek Lawrynowicz Date: Wed, 15 Nov 2023 12:10:04 +0100 Subject: accel/ivpu/37xx: Fix hangs related to MMIO reset There is no need to call MMIO reset using VPU_37XX_BUTTRESS_VPU_IP_RESET register. IP will be reset by FLR or by entering d0i3. Also IP reset during power_up is not needed as the VPU is already in reset. Removing MMIO reset improves stability as it a partial device reset that is not safe in some corner cases. This change also brings back ivpu_boot_pwr_domain_disable() that helps to properly power down VPU when it is hung by a buggy workload. Signed-off-by: Jacek Lawrynowicz Fixes: 828d63042aec ("accel/ivpu: Don't enter d0i3 during FLR") Reviewed-by: Jeffrey Hugo Link: https://patchwork.freedesktop.org/patch/msgid/20231115111004.1304092-1-jacek.lawrynowicz@linux.intel.com --- drivers/accel/ivpu/ivpu_hw_37xx.c | 46 +++++++++++++++++++-------------------- 1 file changed, 22 insertions(+), 24 deletions(-) diff --git a/drivers/accel/ivpu/ivpu_hw_37xx.c b/drivers/accel/ivpu/ivpu_hw_37xx.c index 5c0246b9e522..4ccf1994b97a 100644 --- a/drivers/accel/ivpu/ivpu_hw_37xx.c +++ b/drivers/accel/ivpu/ivpu_hw_37xx.c @@ -502,6 +502,16 @@ static int ivpu_boot_pwr_domain_enable(struct ivpu_device *vdev) return ret; } +static int ivpu_boot_pwr_domain_disable(struct ivpu_device *vdev) +{ + ivpu_boot_dpu_active_drive(vdev, false); + ivpu_boot_pwr_island_isolation_drive(vdev, true); + ivpu_boot_pwr_island_trickle_drive(vdev, false); + ivpu_boot_pwr_island_drive(vdev, false); + + return ivpu_boot_wait_for_pwr_island_status(vdev, 0x0); +} + static void ivpu_boot_no_snoop_enable(struct ivpu_device *vdev) { u32 val = REGV_RD32(VPU_37XX_HOST_IF_TCU_PTW_OVERRIDES); @@ -600,25 +610,17 @@ static int ivpu_hw_37xx_info_init(struct ivpu_device *vdev) static int ivpu_hw_37xx_reset(struct ivpu_device *vdev) { - int ret; - u32 val; - - if (IVPU_WA(punit_disabled)) - return 0; + int ret = 0; - ret = REGB_POLL_FLD(VPU_37XX_BUTTRESS_VPU_IP_RESET, TRIGGER, 0, TIMEOUT_US); - if (ret) { - ivpu_err(vdev, "Timed out waiting for TRIGGER bit\n"); - return ret; + if (ivpu_boot_pwr_domain_disable(vdev)) { + ivpu_err(vdev, "Failed to disable power domain\n"); + ret = -EIO; } - val = REGB_RD32(VPU_37XX_BUTTRESS_VPU_IP_RESET); - val = REG_SET_FLD(VPU_37XX_BUTTRESS_VPU_IP_RESET, TRIGGER, val); - REGB_WR32(VPU_37XX_BUTTRESS_VPU_IP_RESET, val); - - ret = REGB_POLL_FLD(VPU_37XX_BUTTRESS_VPU_IP_RESET, TRIGGER, 0, TIMEOUT_US); - if (ret) - ivpu_err(vdev, "Timed out waiting for RESET completion\n"); + if (ivpu_pll_disable(vdev)) { + ivpu_err(vdev, "Failed to disable PLL\n"); + ret = -EIO; + } return ret; } @@ -651,10 +653,6 @@ static int ivpu_hw_37xx_power_up(struct ivpu_device *vdev) { int ret; - ret = ivpu_hw_37xx_reset(vdev); - if (ret) - ivpu_warn(vdev, "Failed to reset HW: %d\n", ret); - ret = ivpu_hw_37xx_d0i3_disable(vdev); if (ret) ivpu_warn(vdev, "Failed to disable D0I3: %d\n", ret); @@ -722,11 +720,11 @@ static int ivpu_hw_37xx_power_down(struct ivpu_device *vdev) { int ret = 0; - if (!ivpu_hw_37xx_is_idle(vdev) && ivpu_hw_37xx_reset(vdev)) - ivpu_err(vdev, "Failed to reset the VPU\n"); + if (!ivpu_hw_37xx_is_idle(vdev)) + ivpu_warn(vdev, "VPU not idle during power down\n"); - if (ivpu_pll_disable(vdev)) { - ivpu_err(vdev, "Failed to disable PLL\n"); + if (ivpu_hw_37xx_reset(vdev)) { + ivpu_err(vdev, "Failed to reset VPU\n"); ret = -EIO; } -- cgit v1.2.3 From f2d4a5834638bbc967371b9168c0b481519f7c5e Mon Sep 17 00:00:00 2001 From: Hamish Martin Date: Wed, 25 Oct 2023 16:55:10 +1300 Subject: HID: mcp2221: Set driver data before I2C adapter add The process of adding an I2C adapter can invoke I2C accesses on that new adapter (see i2c_detect()). Ensure we have set the adapter's driver data to avoid null pointer dereferences in the xfer functions during the adapter add. This has been noted in the past and the same fix proposed but not completed. See: https://lore.kernel.org/lkml/ef597e73-ed71-168e-52af-0d19b03734ac@vigem.de/ Signed-off-by: Hamish Martin Signed-off-by: Jiri Kosina --- drivers/hid/hid-mcp2221.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/hid/hid-mcp2221.c b/drivers/hid/hid-mcp2221.c index 72883e0ce757..b95f31cf0fa2 100644 --- a/drivers/hid/hid-mcp2221.c +++ b/drivers/hid/hid-mcp2221.c @@ -1157,12 +1157,12 @@ static int mcp2221_probe(struct hid_device *hdev, snprintf(mcp->adapter.name, sizeof(mcp->adapter.name), "MCP2221 usb-i2c bridge"); + i2c_set_adapdata(&mcp->adapter, mcp); ret = devm_i2c_add_adapter(&hdev->dev, &mcp->adapter); if (ret) { hid_err(hdev, "can't add usb-i2c adapter: %d\n", ret); return ret; } - i2c_set_adapdata(&mcp->adapter, mcp); #if IS_REACHABLE(CONFIG_GPIOLIB) /* Setup GPIO chip */ -- cgit v1.2.3 From 73ce9f1f2741a38f5d27393e627702ae2c46e6f2 Mon Sep 17 00:00:00 2001 From: Hamish Martin Date: Wed, 25 Oct 2023 16:55:11 +1300 Subject: HID: mcp2221: Allow IO to start during probe During the probe we add an I2C adapter and as soon as we add that adapter it may be used for a transfer (e.g via the code in i2cdetect()). Those transfers are not able to complete and time out. This is because the HID raw_event callback (mcp2221_raw_event) will not be invoked until the HID device's 'driver_input_lock' is marked up at the completion of the probe in hid_device_probe(). This starves the driver of the responses it is waiting for. In order to allow the I2C transfers to complete while we are still in the probe, start the IO once we have completed init of the HID device. This issue seems to have been seen before and a patch was submitted but it seems it was never accepted. See: https://lore.kernel.org/all/20221103222714.21566-3-Enrik.Berkhan@inka.de/ Signed-off-by: Hamish Martin Signed-off-by: Jiri Kosina --- drivers/hid/hid-mcp2221.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/hid/hid-mcp2221.c b/drivers/hid/hid-mcp2221.c index b95f31cf0fa2..aef0785c91cc 100644 --- a/drivers/hid/hid-mcp2221.c +++ b/drivers/hid/hid-mcp2221.c @@ -1142,6 +1142,8 @@ static int mcp2221_probe(struct hid_device *hdev, if (ret) return ret; + hid_device_io_start(hdev); + /* Set I2C bus clock diviser */ if (i2c_clk_freq > 400) i2c_clk_freq = 400; -- cgit v1.2.3 From 113f736655e4f20633e107d731dd5bd097d5938c Mon Sep 17 00:00:00 2001 From: Yihong Cao Date: Mon, 30 Oct 2023 01:05:38 +0800 Subject: HID: apple: add Jamesdonkey and A3R to non-apple keyboards list Jamesdonkey A3R keyboard is identified as "Jamesdonkey A3R" in wired mode, "A3R-U" in wireless mode and "A3R" in bluetooth mode. Adding them to non-apple keyboards fixes function key. Signed-off-by: Yihong Cao Signed-off-by: Jiri Kosina --- drivers/hid/hid-apple.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/hid/hid-apple.c b/drivers/hid/hid-apple.c index 3ca45975c686..d9e9829b2200 100644 --- a/drivers/hid/hid-apple.c +++ b/drivers/hid/hid-apple.c @@ -345,6 +345,8 @@ static const struct apple_non_apple_keyboard non_apple_keyboards[] = { { "AONE" }, { "GANSS" }, { "Hailuck" }, + { "Jamesdonkey" }, + { "A3R" }, }; static bool apple_is_non_apple_keyboard(struct hid_device *hdev) -- cgit v1.2.3 From fc43e9c857b7aa55efba9398419b14d9e35dcc7d Mon Sep 17 00:00:00 2001 From: Charles Yi Date: Tue, 31 Oct 2023 12:32:39 +0800 Subject: HID: fix HID device resource race between HID core and debugging support hid_debug_events_release releases resources bound to the HID device instance. hid_device_release releases the underlying HID device instance potentially before hid_debug_events_release has completed releasing debug resources bound to the same HID device instance. Reference count to prevent the HID device instance from being torn down preemptively when HID debugging support is used. When count reaches zero, release core resources of HID device instance using hiddev_free. The crash: [ 120.728477][ T4396] kernel BUG at lib/list_debug.c:53! [ 120.728505][ T4396] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP [ 120.739806][ T4396] Modules linked in: bcmdhd dhd_static_buf 8822cu pcie_mhi r8168 [ 120.747386][ T4396] CPU: 1 PID: 4396 Comm: hidt_bridge Not tainted 5.10.110 #257 [ 120.754771][ T4396] Hardware name: Rockchip RK3588 EVB4 LP4 V10 Board (DT) [ 120.761643][ T4396] pstate: 60400089 (nZCv daIf +PAN -UAO -TCO BTYPE=--) [ 120.768338][ T4396] pc : __list_del_entry_valid+0x98/0xac [ 120.773730][ T4396] lr : __list_del_entry_valid+0x98/0xac [ 120.779120][ T4396] sp : ffffffc01e62bb60 [ 120.783126][ T4396] x29: ffffffc01e62bb60 x28: ffffff818ce3a200 [ 120.789126][ T4396] x27: 0000000000000009 x26: 0000000000980000 [ 120.795126][ T4396] x25: ffffffc012431000 x24: ffffff802c6d4e00 [ 120.801125][ T4396] x23: ffffff8005c66f00 x22: ffffffc01183b5b8 [ 120.807125][ T4396] x21: ffffff819df2f100 x20: 0000000000000000 [ 120.813124][ T4396] x19: ffffff802c3f0700 x18: ffffffc01d2cd058 [ 120.819124][ T4396] x17: 0000000000000000 x16: 0000000000000000 [ 120.825124][ T4396] x15: 0000000000000004 x14: 0000000000003fff [ 120.831123][ T4396] x13: ffffffc012085588 x12: 0000000000000003 [ 120.837123][ T4396] x11: 00000000ffffbfff x10: 0000000000000003 [ 120.843123][ T4396] x9 : 455103d46b329300 x8 : 455103d46b329300 [ 120.849124][ T4396] x7 : 74707572726f6320 x6 : ffffffc0124b8cb5 [ 120.855124][ T4396] x5 : ffffffffffffffff x4 : 0000000000000000 [ 120.861123][ T4396] x3 : ffffffc011cf4f90 x2 : ffffff81fee7b948 [ 120.867122][ T4396] x1 : ffffffc011cf4f90 x0 : 0000000000000054 [ 120.873122][ T4396] Call trace: [ 120.876259][ T4396] __list_del_entry_valid+0x98/0xac [ 120.881304][ T4396] hid_debug_events_release+0x48/0x12c [ 120.886617][ T4396] full_proxy_release+0x50/0xbc [ 120.891323][ T4396] __fput+0xdc/0x238 [ 120.895075][ T4396] ____fput+0x14/0x24 [ 120.898911][ T4396] task_work_run+0x90/0x148 [ 120.903268][ T4396] do_exit+0x1bc/0x8a4 [ 120.907193][ T4396] do_group_exit+0x8c/0xa4 [ 120.911458][ T4396] get_signal+0x468/0x744 [ 120.915643][ T4396] do_signal+0x84/0x280 [ 120.919650][ T4396] do_notify_resume+0xd0/0x218 [ 120.924262][ T4396] work_pending+0xc/0x3f0 [ Rahul Rameshbabu : rework changelog ] Fixes: cd667ce24796 ("HID: use debugfs for events/reports dumping") Signed-off-by: Charles Yi Signed-off-by: Jiri Kosina --- drivers/hid/hid-core.c | 12 ++++++++++-- drivers/hid/hid-debug.c | 3 +++ include/linux/hid.h | 3 +++ 3 files changed, 16 insertions(+), 2 deletions(-) diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c index 8992e3c1e769..e0181218ad85 100644 --- a/drivers/hid/hid-core.c +++ b/drivers/hid/hid-core.c @@ -702,15 +702,22 @@ static void hid_close_report(struct hid_device *device) * Free a device structure, all reports, and all fields. */ -static void hid_device_release(struct device *dev) +void hiddev_free(struct kref *ref) { - struct hid_device *hid = to_hid_device(dev); + struct hid_device *hid = container_of(ref, struct hid_device, ref); hid_close_report(hid); kfree(hid->dev_rdesc); kfree(hid); } +static void hid_device_release(struct device *dev) +{ + struct hid_device *hid = to_hid_device(dev); + + kref_put(&hid->ref, hiddev_free); +} + /* * Fetch a report description item from the data stream. We support long * items, though they are not used yet. @@ -2846,6 +2853,7 @@ struct hid_device *hid_allocate_device(void) spin_lock_init(&hdev->debug_list_lock); sema_init(&hdev->driver_input_lock, 1); mutex_init(&hdev->ll_open_lock); + kref_init(&hdev->ref); hid_bpf_device_init(hdev); diff --git a/drivers/hid/hid-debug.c b/drivers/hid/hid-debug.c index e7ef1ea107c9..7dd83ec74f8a 100644 --- a/drivers/hid/hid-debug.c +++ b/drivers/hid/hid-debug.c @@ -1135,6 +1135,7 @@ static int hid_debug_events_open(struct inode *inode, struct file *file) goto out; } list->hdev = (struct hid_device *) inode->i_private; + kref_get(&list->hdev->ref); file->private_data = list; mutex_init(&list->read_mutex); @@ -1227,6 +1228,8 @@ static int hid_debug_events_release(struct inode *inode, struct file *file) list_del(&list->node); spin_unlock_irqrestore(&list->hdev->debug_list_lock, flags); kfifo_free(&list->hid_debug_fifo); + + kref_put(&list->hdev->ref, hiddev_free); kfree(list); return 0; diff --git a/include/linux/hid.h b/include/linux/hid.h index 5a8387a4a712..bf43f3ff6664 100644 --- a/include/linux/hid.h +++ b/include/linux/hid.h @@ -679,6 +679,7 @@ struct hid_device { /* device report descriptor */ struct list_head debug_list; spinlock_t debug_list_lock; wait_queue_head_t debug_wait; + struct kref ref; unsigned int id; /* system unique id */ @@ -687,6 +688,8 @@ struct hid_device { /* device report descriptor */ #endif /* CONFIG_BPF */ }; +void hiddev_free(struct kref *ref); + #define to_hid_device(pdev) \ container_of(pdev, struct hid_device, dev) -- cgit v1.2.3 From a5e913c25b6b2b6ae02acef6d9400645ac03dfdf Mon Sep 17 00:00:00 2001 From: Brett Raye Date: Thu, 2 Nov 2023 18:10:38 -0700 Subject: HID: glorious: fix Glorious Model I HID report The Glorious Model I mouse has a buggy HID report descriptor for its keyboard endpoint (used for programmable buttons). For report ID 2, there is a mismatch between Logical Minimum and Usage Minimum in the array that reports keycodes. The offending portion of the descriptor: (from hid-decode) 0x95, 0x05, // Report Count (5) 30 0x75, 0x08, // Report Size (8) 32 0x15, 0x00, // Logical Minimum (0) 34 0x25, 0x65, // Logical Maximum (101) 36 0x05, 0x07, // Usage Page (Keyboard) 38 0x19, 0x01, // Usage Minimum (1) 40 0x29, 0x65, // Usage Maximum (101) 42 0x81, 0x00, // Input (Data,Arr,Abs) 44 This bug shifts all programmed keycodes up by 1. Importantly, this causes "empty" array indexes of 0x00 to be interpreted as 0x01, ErrorRollOver. The presence of ErrorRollOver causes the system to ignore all keypresses from the endpoint and breaks the ability to use the programmable buttons. Setting byte 41 to 0x00 fixes this, and causes keycodes to be interpreted correctly. Also, USB_VENDOR_ID_GLORIOUS is changed to USB_VENDOR_ID_SINOWEALTH, and a new ID for Laview Technology is added. Glorious seems to be white-labeling controller boards or mice from these vendors. There isn't a single canonical vendor ID for Glorious products. Signed-off-by: Brett Raye Signed-off-by: Jiri Kosina --- drivers/hid/hid-glorious.c | 16 ++++++++++++++-- drivers/hid/hid-ids.h | 11 +++++++---- 2 files changed, 21 insertions(+), 6 deletions(-) diff --git a/drivers/hid/hid-glorious.c b/drivers/hid/hid-glorious.c index 558eb08c19ef..281b3a7187ce 100644 --- a/drivers/hid/hid-glorious.c +++ b/drivers/hid/hid-glorious.c @@ -21,6 +21,10 @@ MODULE_DESCRIPTION("HID driver for Glorious PC Gaming Race mice"); * Glorious Model O and O- specify the const flag in the consumer input * report descriptor, which leads to inputs being ignored. Fix this * by patching the descriptor. + * + * Glorious Model I incorrectly specifes the Usage Minimum for its + * keyboard HID report, causing keycodes to be misinterpreted. + * Fix this by setting Usage Minimum to 0 in that report. */ static __u8 *glorious_report_fixup(struct hid_device *hdev, __u8 *rdesc, unsigned int *rsize) @@ -32,6 +36,10 @@ static __u8 *glorious_report_fixup(struct hid_device *hdev, __u8 *rdesc, rdesc[85] = rdesc[113] = rdesc[141] = \ HID_MAIN_ITEM_VARIABLE | HID_MAIN_ITEM_RELATIVE; } + if (*rsize == 156 && rdesc[41] == 1) { + hid_info(hdev, "patching Glorious Model I keyboard report descriptor\n"); + rdesc[41] = 0; + } return rdesc; } @@ -44,6 +52,8 @@ static void glorious_update_name(struct hid_device *hdev) model = "Model O"; break; case USB_DEVICE_ID_GLORIOUS_MODEL_D: model = "Model D"; break; + case USB_DEVICE_ID_GLORIOUS_MODEL_I: + model = "Model I"; break; } snprintf(hdev->name, sizeof(hdev->name), "%s %s", "Glorious", model); @@ -66,10 +76,12 @@ static int glorious_probe(struct hid_device *hdev, } static const struct hid_device_id glorious_devices[] = { - { HID_USB_DEVICE(USB_VENDOR_ID_GLORIOUS, + { HID_USB_DEVICE(USB_VENDOR_ID_SINOWEALTH, USB_DEVICE_ID_GLORIOUS_MODEL_O) }, - { HID_USB_DEVICE(USB_VENDOR_ID_GLORIOUS, + { HID_USB_DEVICE(USB_VENDOR_ID_SINOWEALTH, USB_DEVICE_ID_GLORIOUS_MODEL_D) }, + { HID_USB_DEVICE(USB_VENDOR_ID_LAVIEW, + USB_DEVICE_ID_GLORIOUS_MODEL_I) }, { } }; MODULE_DEVICE_TABLE(hid, glorious_devices); diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h index f7973ccd84a2..125c73a20051 100644 --- a/drivers/hid/hid-ids.h +++ b/drivers/hid/hid-ids.h @@ -511,10 +511,6 @@ #define USB_DEVICE_ID_GENERAL_TOUCH_WIN8_PIT_010A 0x010a #define USB_DEVICE_ID_GENERAL_TOUCH_WIN8_PIT_E100 0xe100 -#define USB_VENDOR_ID_GLORIOUS 0x258a -#define USB_DEVICE_ID_GLORIOUS_MODEL_D 0x0033 -#define USB_DEVICE_ID_GLORIOUS_MODEL_O 0x0036 - #define I2C_VENDOR_ID_GOODIX 0x27c6 #define I2C_DEVICE_ID_GOODIX_01F0 0x01f0 @@ -745,6 +741,9 @@ #define USB_VENDOR_ID_LABTEC 0x1020 #define USB_DEVICE_ID_LABTEC_WIRELESS_KEYBOARD 0x0006 +#define USB_VENDOR_ID_LAVIEW 0x22D4 +#define USB_DEVICE_ID_GLORIOUS_MODEL_I 0x1503 + #define USB_VENDOR_ID_LCPOWER 0x1241 #define USB_DEVICE_ID_LCPOWER_LC1000 0xf767 @@ -1160,6 +1159,10 @@ #define USB_VENDOR_ID_SIGMATEL 0x066F #define USB_DEVICE_ID_SIGMATEL_STMP3780 0x3780 +#define USB_VENDOR_ID_SINOWEALTH 0x258a +#define USB_DEVICE_ID_GLORIOUS_MODEL_D 0x0033 +#define USB_DEVICE_ID_GLORIOUS_MODEL_O 0x0036 + #define USB_VENDOR_ID_SIS_TOUCH 0x0457 #define USB_DEVICE_ID_SIS9200_TOUCH 0x9200 #define USB_DEVICE_ID_SIS817_TOUCH 0x0817 -- cgit v1.2.3 From 8d6ef26501b97243ee6c16b8187c5b38cb69b77d Mon Sep 17 00:00:00 2001 From: Thomas Zimmermann Date: Thu, 16 Nov 2023 14:02:12 +0100 Subject: drm/ast: Disconnect BMC if physical connector is connected Many user-space compositors fail with mode setting if a CRTC has more than one connected connector. This is the case with the BMC on Aspeed systems. Work around this problem by setting the BMC's connector status to disconnected when the physical connector has a display attached. This way compositors will only see one connected connector at a time; either the physical one or the BMC. Suggested-by: Jocelyn Falempe Fixes: e329cb53b45d ("drm/ast: Add BMC virtual connector") Signed-off-by: Thomas Zimmermann Cc: # v6.6+ Reviewed-by: Jocelyn Falempe Link: https://patchwork.freedesktop.org/patch/msgid/20231116130217.22931-1-tzimmermann@suse.de --- drivers/gpu/drm/ast/ast_drv.h | 13 ++++++++- drivers/gpu/drm/ast/ast_mode.c | 62 +++++++++++++++++++++++++++++++++++++----- 2 files changed, 67 insertions(+), 8 deletions(-) diff --git a/drivers/gpu/drm/ast/ast_drv.h b/drivers/gpu/drm/ast/ast_drv.h index 2aee32344f4a..772f3b049c16 100644 --- a/drivers/gpu/drm/ast/ast_drv.h +++ b/drivers/gpu/drm/ast/ast_drv.h @@ -174,6 +174,17 @@ to_ast_sil164_connector(struct drm_connector *connector) return container_of(connector, struct ast_sil164_connector, base); } +struct ast_bmc_connector { + struct drm_connector base; + struct drm_connector *physical_connector; +}; + +static inline struct ast_bmc_connector * +to_ast_bmc_connector(struct drm_connector *connector) +{ + return container_of(connector, struct ast_bmc_connector, base); +} + /* * Device */ @@ -218,7 +229,7 @@ struct ast_device { } astdp; struct { struct drm_encoder encoder; - struct drm_connector connector; + struct ast_bmc_connector bmc_connector; } bmc; } output; diff --git a/drivers/gpu/drm/ast/ast_mode.c b/drivers/gpu/drm/ast/ast_mode.c index cb9614984285..c20534d0ef7c 100644 --- a/drivers/gpu/drm/ast/ast_mode.c +++ b/drivers/gpu/drm/ast/ast_mode.c @@ -1767,6 +1767,30 @@ static const struct drm_encoder_funcs ast_bmc_encoder_funcs = { .destroy = drm_encoder_cleanup, }; +static int ast_bmc_connector_helper_detect_ctx(struct drm_connector *connector, + struct drm_modeset_acquire_ctx *ctx, + bool force) +{ + struct ast_bmc_connector *bmc_connector = to_ast_bmc_connector(connector); + struct drm_connector *physical_connector = bmc_connector->physical_connector; + + /* + * Most user-space compositors cannot handle more than one connected + * connector per CRTC. Hence, we only mark the BMC as connected if the + * physical connector is disconnected. If the physical connector's status + * is connected or unknown, the BMC remains disconnected. This has no + * effect on the output of the BMC. + * + * FIXME: Remove this logic once user-space compositors can handle more + * than one connector per CRTC. The BMC should always be connected. + */ + + if (physical_connector && physical_connector->status == connector_status_disconnected) + return connector_status_connected; + + return connector_status_disconnected; +} + static int ast_bmc_connector_helper_get_modes(struct drm_connector *connector) { return drm_add_modes_noedid(connector, 4096, 4096); @@ -1774,6 +1798,7 @@ static int ast_bmc_connector_helper_get_modes(struct drm_connector *connector) static const struct drm_connector_helper_funcs ast_bmc_connector_helper_funcs = { .get_modes = ast_bmc_connector_helper_get_modes, + .detect_ctx = ast_bmc_connector_helper_detect_ctx, }; static const struct drm_connector_funcs ast_bmc_connector_funcs = { @@ -1784,12 +1809,33 @@ static const struct drm_connector_funcs ast_bmc_connector_funcs = { .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, }; -static int ast_bmc_output_init(struct ast_device *ast) +static int ast_bmc_connector_init(struct drm_device *dev, + struct ast_bmc_connector *bmc_connector, + struct drm_connector *physical_connector) +{ + struct drm_connector *connector = &bmc_connector->base; + int ret; + + ret = drm_connector_init(dev, connector, &ast_bmc_connector_funcs, + DRM_MODE_CONNECTOR_VIRTUAL); + if (ret) + return ret; + + drm_connector_helper_add(connector, &ast_bmc_connector_helper_funcs); + + bmc_connector->physical_connector = physical_connector; + + return 0; +} + +static int ast_bmc_output_init(struct ast_device *ast, + struct drm_connector *physical_connector) { struct drm_device *dev = &ast->base; struct drm_crtc *crtc = &ast->crtc; struct drm_encoder *encoder = &ast->output.bmc.encoder; - struct drm_connector *connector = &ast->output.bmc.connector; + struct ast_bmc_connector *bmc_connector = &ast->output.bmc.bmc_connector; + struct drm_connector *connector = &bmc_connector->base; int ret; ret = drm_encoder_init(dev, encoder, @@ -1799,13 +1845,10 @@ static int ast_bmc_output_init(struct ast_device *ast) return ret; encoder->possible_crtcs = drm_crtc_mask(crtc); - ret = drm_connector_init(dev, connector, &ast_bmc_connector_funcs, - DRM_MODE_CONNECTOR_VIRTUAL); + ret = ast_bmc_connector_init(dev, bmc_connector, physical_connector); if (ret) return ret; - drm_connector_helper_add(connector, &ast_bmc_connector_helper_funcs); - ret = drm_connector_attach_encoder(connector, encoder); if (ret) return ret; @@ -1864,6 +1907,7 @@ static const struct drm_mode_config_funcs ast_mode_config_funcs = { int ast_mode_config_init(struct ast_device *ast) { struct drm_device *dev = &ast->base; + struct drm_connector *physical_connector = NULL; int ret; ret = drmm_mode_config_init(dev); @@ -1904,23 +1948,27 @@ int ast_mode_config_init(struct ast_device *ast) ret = ast_vga_output_init(ast); if (ret) return ret; + physical_connector = &ast->output.vga.vga_connector.base; } if (ast->tx_chip_types & AST_TX_SIL164_BIT) { ret = ast_sil164_output_init(ast); if (ret) return ret; + physical_connector = &ast->output.sil164.sil164_connector.base; } if (ast->tx_chip_types & AST_TX_DP501_BIT) { ret = ast_dp501_output_init(ast); if (ret) return ret; + physical_connector = &ast->output.dp501.connector; } if (ast->tx_chip_types & AST_TX_ASTDP_BIT) { ret = ast_astdp_output_init(ast); if (ret) return ret; + physical_connector = &ast->output.astdp.connector; } - ret = ast_bmc_output_init(ast); + ret = ast_bmc_output_init(ast, physical_connector); if (ret) return ret; -- cgit v1.2.3 From c55092187d9ad7b2f8f5a8645286fa03997d442f Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Tue, 14 Nov 2023 15:54:30 +0100 Subject: HID: add ALWAYS_POLL quirk for Apple kb These devices disconnect if suspended without remote wakeup. They can operate with the standard driver. Signed-off-by: Oliver Neukum Signed-off-by: Jiri Kosina --- drivers/hid/hid-quirks.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/hid/hid-quirks.c b/drivers/hid/hid-quirks.c index 5a48fcaa32f0..ea472923fab0 100644 --- a/drivers/hid/hid-quirks.c +++ b/drivers/hid/hid-quirks.c @@ -33,6 +33,7 @@ static const struct hid_device_id hid_quirks[] = { { HID_USB_DEVICE(USB_VENDOR_ID_AKAI, USB_DEVICE_ID_AKAI_MPKMINI2), HID_QUIRK_NO_INIT_REPORTS }, { HID_USB_DEVICE(USB_VENDOR_ID_ALPS, USB_DEVICE_ID_IBM_GAMEPAD), HID_QUIRK_BADPAD }, { HID_USB_DEVICE(USB_VENDOR_ID_AMI, USB_DEVICE_ID_AMI_VIRT_KEYBOARD_AND_MOUSE), HID_QUIRK_ALWAYS_POLL }, + { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_REVB_ANSI), HID_QUIRK_ALWAYS_POLL }, { HID_USB_DEVICE(USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_2PORTKVM), HID_QUIRK_NOGET }, { HID_USB_DEVICE(USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_4PORTKVMC), HID_QUIRK_NOGET }, { HID_USB_DEVICE(USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_4PORTKVM), HID_QUIRK_NOGET }, -- cgit v1.2.3 From 4e7a8dbd2bc0aec4605a5069df7a779bd9e64db1 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Mon, 13 Nov 2023 08:46:32 -0800 Subject: pwm: bcm2835: Fix NPD in suspend/resume MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit When 119a508c4dc9 ("pwm: bcm2835: Add support for suspend/resume") was sent out on October 11th,, there was still a call to platform_set_drvdata() which would ensure that the driver private data structure could be used in bcm2835_pwm_{suspend,resume}. A cleanup now merged as commit commit 2ce7b7f6704c ("pwm: bcm2835: Simplify using devm functions") removed that call which would now cause a NPD in bcm2835_pwm_{suspend,resume} as a consequence. Fixes: 119a508c4dc9 ("pwm: bcm2835: Add support for suspend/resume") Signed-off-by: Florian Fainelli Reviewed-by: Uwe Kleine-König Link: https://lore.kernel.org/linux-pwm/20231113164632.2439400-1-florian.fainelli@broadcom.com Signed-off-by: Uwe Kleine-König --- drivers/pwm/pwm-bcm2835.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/pwm/pwm-bcm2835.c b/drivers/pwm/pwm-bcm2835.c index 9777babd5b95..ab30667f4f95 100644 --- a/drivers/pwm/pwm-bcm2835.c +++ b/drivers/pwm/pwm-bcm2835.c @@ -155,6 +155,8 @@ static int bcm2835_pwm_probe(struct platform_device *pdev) pc->chip.ops = &bcm2835_pwm_ops; pc->chip.npwm = 2; + platform_set_drvdata(pdev, pc); + ret = devm_pwmchip_add(&pdev->dev, &pc->chip); if (ret < 0) return dev_err_probe(&pdev->dev, ret, -- cgit v1.2.3 From c0e2926266af3b5acf28df0a8fc6e4d90effe0bb Mon Sep 17 00:00:00 2001 From: Kunwu Chan Date: Sun, 19 Nov 2023 22:17:59 +0800 Subject: ipv4: Correct/silence an endian warning in __ip_do_redirect net/ipv4/route.c:783:46: warning: incorrect type in argument 2 (different base types) net/ipv4/route.c:783:46: expected unsigned int [usertype] key net/ipv4/route.c:783:46: got restricted __be32 [usertype] new_gw Fixes: 969447f226b4 ("ipv4: use new_gw for redirect neigh lookup") Suggested-by: Eric Dumazet Signed-off-by: Kunwu Chan Link: https://lore.kernel.org/r/20231119141759.420477-1-chentao@kylinos.cn Signed-off-by: Paolo Abeni --- net/ipv4/route.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/ipv4/route.c b/net/ipv4/route.c index 3290a4442b4a..16615d107cf0 100644 --- a/net/ipv4/route.c +++ b/net/ipv4/route.c @@ -780,7 +780,7 @@ static void __ip_do_redirect(struct rtable *rt, struct sk_buff *skb, struct flow goto reject_redirect; } - n = __ipv4_neigh_lookup(rt->dst.dev, new_gw); + n = __ipv4_neigh_lookup(rt->dst.dev, (__force u32)new_gw); if (!n) n = neigh_create(&arp_tbl, &new_gw, rt->dst.dev); if (!IS_ERR(n)) { -- cgit v1.2.3 From d30fb712e52964f2cf9a9c14cf67078394044837 Mon Sep 17 00:00:00 2001 From: Haiyang Zhang Date: Sun, 19 Nov 2023 08:23:41 -0800 Subject: hv_netvsc: fix race of netvsc and VF register_netdevice The rtnl lock also needs to be held before rndis_filter_device_add() which advertises nvsp_2_vsc_capability / sriov bit, and triggers VF NIC offering and registering. If VF NIC finished register_netdev() earlier it may cause name based config failure. To fix this issue, move the call to rtnl_lock() before rndis_filter_device_add(), so VF will be registered later than netvsc / synthetic NIC, and gets a name numbered (ethX) after netvsc. Cc: stable@vger.kernel.org Fixes: e04e7a7bbd4b ("hv_netvsc: Fix a deadlock by getting rtnl lock earlier in netvsc_probe()") Reported-by: Dexuan Cui Signed-off-by: Haiyang Zhang Reviewed-by: Wojciech Drewek Reviewed-by: Simon Horman Reviewed-by: Dexuan Cui Signed-off-by: Paolo Abeni --- drivers/net/hyperv/netvsc_drv.c | 25 +++++++++++++++---------- 1 file changed, 15 insertions(+), 10 deletions(-) diff --git a/drivers/net/hyperv/netvsc_drv.c b/drivers/net/hyperv/netvsc_drv.c index 3ba3c8fb28a5..5e528a76f5f5 100644 --- a/drivers/net/hyperv/netvsc_drv.c +++ b/drivers/net/hyperv/netvsc_drv.c @@ -2531,15 +2531,6 @@ static int netvsc_probe(struct hv_device *dev, goto devinfo_failed; } - nvdev = rndis_filter_device_add(dev, device_info); - if (IS_ERR(nvdev)) { - ret = PTR_ERR(nvdev); - netdev_err(net, "unable to add netvsc device (ret %d)\n", ret); - goto rndis_failed; - } - - eth_hw_addr_set(net, device_info->mac_adr); - /* We must get rtnl lock before scheduling nvdev->subchan_work, * otherwise netvsc_subchan_work() can get rtnl lock first and wait * all subchannels to show up, but that may not happen because @@ -2547,9 +2538,23 @@ static int netvsc_probe(struct hv_device *dev, * -> ... -> device_add() -> ... -> __device_attach() can't get * the device lock, so all the subchannels can't be processed -- * finally netvsc_subchan_work() hangs forever. + * + * The rtnl lock also needs to be held before rndis_filter_device_add() + * which advertises nvsp_2_vsc_capability / sriov bit, and triggers + * VF NIC offering and registering. If VF NIC finished register_netdev() + * earlier it may cause name based config failure. */ rtnl_lock(); + nvdev = rndis_filter_device_add(dev, device_info); + if (IS_ERR(nvdev)) { + ret = PTR_ERR(nvdev); + netdev_err(net, "unable to add netvsc device (ret %d)\n", ret); + goto rndis_failed; + } + + eth_hw_addr_set(net, device_info->mac_adr); + if (nvdev->num_chn > 1) schedule_work(&nvdev->subchan_work); @@ -2586,9 +2591,9 @@ static int netvsc_probe(struct hv_device *dev, return 0; register_failed: - rtnl_unlock(); rndis_filter_device_remove(dev, nvdev); rndis_failed: + rtnl_unlock(); netvsc_devinfo_put(device_info); devinfo_failed: free_percpu(net_device_ctx->vf_stats); -- cgit v1.2.3 From 85520856466ed6bc3b1ccb013cddac70ceb437db Mon Sep 17 00:00:00 2001 From: Haiyang Zhang Date: Sun, 19 Nov 2023 08:23:42 -0800 Subject: hv_netvsc: Fix race of register_netdevice_notifier and VF register If VF NIC is registered earlier, NETDEV_REGISTER event is replayed, but NETDEV_POST_INIT is not. Move register_netdevice_notifier() earlier, so the call back function is set before probing. Cc: stable@vger.kernel.org Fixes: e04e7a7bbd4b ("hv_netvsc: Fix a deadlock by getting rtnl lock earlier in netvsc_probe()") Reported-by: Dexuan Cui Signed-off-by: Haiyang Zhang Reviewed-by: Wojciech Drewek Reviewed-by: Dexuan Cui Signed-off-by: Paolo Abeni --- drivers/net/hyperv/netvsc_drv.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/drivers/net/hyperv/netvsc_drv.c b/drivers/net/hyperv/netvsc_drv.c index 5e528a76f5f5..b7dfd51f09e6 100644 --- a/drivers/net/hyperv/netvsc_drv.c +++ b/drivers/net/hyperv/netvsc_drv.c @@ -2793,12 +2793,17 @@ static int __init netvsc_drv_init(void) } netvsc_ring_bytes = ring_size * PAGE_SIZE; + register_netdevice_notifier(&netvsc_netdev_notifier); + ret = vmbus_driver_register(&netvsc_drv); if (ret) - return ret; + goto err_vmbus_reg; - register_netdevice_notifier(&netvsc_netdev_notifier); return 0; + +err_vmbus_reg: + unregister_netdevice_notifier(&netvsc_netdev_notifier); + return ret; } MODULE_LICENSE("GPL"); -- cgit v1.2.3 From c807d6cd089d2f4951baa838081ec5ae3e2360f8 Mon Sep 17 00:00:00 2001 From: Long Li Date: Sun, 19 Nov 2023 08:23:43 -0800 Subject: hv_netvsc: Mark VF as slave before exposing it to user-mode When a VF is being exposed form the kernel, it should be marked as "slave" before exposing to the user-mode. The VF is not usable without netvsc running as master. The user-mode should never see a VF without the "slave" flag. This commit moves the code of setting the slave flag to the time before VF is exposed to user-mode. Cc: stable@vger.kernel.org Fixes: 0c195567a8f6 ("netvsc: transparent VF management") Signed-off-by: Long Li Signed-off-by: Haiyang Zhang Acked-by: Stephen Hemminger Acked-by: Dexuan Cui Signed-off-by: Paolo Abeni --- drivers/net/hyperv/netvsc_drv.c | 32 +++++++++++++++++++++++--------- 1 file changed, 23 insertions(+), 9 deletions(-) diff --git a/drivers/net/hyperv/netvsc_drv.c b/drivers/net/hyperv/netvsc_drv.c index b7dfd51f09e6..706ea5263e87 100644 --- a/drivers/net/hyperv/netvsc_drv.c +++ b/drivers/net/hyperv/netvsc_drv.c @@ -2206,9 +2206,6 @@ static int netvsc_vf_join(struct net_device *vf_netdev, goto upper_link_failed; } - /* set slave flag before open to prevent IPv6 addrconf */ - vf_netdev->flags |= IFF_SLAVE; - schedule_delayed_work(&ndev_ctx->vf_takeover, VF_TAKEOVER_INT); call_netdevice_notifiers(NETDEV_JOIN, vf_netdev); @@ -2315,16 +2312,18 @@ static struct net_device *get_netvsc_byslot(const struct net_device *vf_netdev) } - /* Fallback path to check synthetic vf with - * help of mac addr + /* Fallback path to check synthetic vf with help of mac addr. + * Because this function can be called before vf_netdev is + * initialized (NETDEV_POST_INIT) when its perm_addr has not been copied + * from dev_addr, also try to match to its dev_addr. + * Note: On Hyper-V and Azure, it's not possible to set a MAC address + * on a VF that matches to the MAC of a unrelated NETVSC device. */ list_for_each_entry(ndev_ctx, &netvsc_dev_list, list) { ndev = hv_get_drvdata(ndev_ctx->device_ctx); - if (ether_addr_equal(vf_netdev->perm_addr, ndev->perm_addr)) { - netdev_notice(vf_netdev, - "falling back to mac addr based matching\n"); + if (ether_addr_equal(vf_netdev->perm_addr, ndev->perm_addr) || + ether_addr_equal(vf_netdev->dev_addr, ndev->perm_addr)) return ndev; - } } netdev_notice(vf_netdev, @@ -2332,6 +2331,19 @@ static struct net_device *get_netvsc_byslot(const struct net_device *vf_netdev) return NULL; } +static int netvsc_prepare_bonding(struct net_device *vf_netdev) +{ + struct net_device *ndev; + + ndev = get_netvsc_byslot(vf_netdev); + if (!ndev) + return NOTIFY_DONE; + + /* set slave flag before open to prevent IPv6 addrconf */ + vf_netdev->flags |= IFF_SLAVE; + return NOTIFY_DONE; +} + static int netvsc_register_vf(struct net_device *vf_netdev) { struct net_device_context *net_device_ctx; @@ -2758,6 +2770,8 @@ static int netvsc_netdev_event(struct notifier_block *this, return NOTIFY_DONE; switch (event) { + case NETDEV_POST_INIT: + return netvsc_prepare_bonding(event_dev); case NETDEV_REGISTER: return netvsc_register_vf(event_dev); case NETDEV_UNREGISTER: -- cgit v1.2.3 From e8df9d9f4209c04161321d8c12640ae560f65939 Mon Sep 17 00:00:00 2001 From: Dapeng Mi Date: Tue, 21 Nov 2023 09:46:28 +0800 Subject: perf/x86/intel: Correct incorrect 'or' operation for PMU capabilities When running perf-stat command on Intel hybrid platform, perf-stat reports the following errors: sudo taskset -c 7 ./perf stat -vvvv -e cpu_atom/instructions/ sleep 1 Opening: cpu/cycles/:HG ------------------------------------------------------------ perf_event_attr: type 0 (PERF_TYPE_HARDWARE) config 0xa00000000 disabled 1 ------------------------------------------------------------ sys_perf_event_open: pid 0 cpu -1 group_fd -1 flags 0x8 sys_perf_event_open failed, error -16 Performance counter stats for 'sleep 1': cpu_atom/instructions/ It looks the cpu_atom/instructions/ event can't be enabled on atom PMU even when the process is pinned on atom core. Investigation shows that exclusive_event_init() helper always returns -EBUSY error in the perf event creation. That's strange since the atom PMU should not be an exclusive PMU. Further investigation shows the issue was introduced by commit: 97588df87b56 ("perf/x86/intel: Add common intel_pmu_init_hybrid()") The commit originally intents to clear the bit PERF_PMU_CAP_AUX_OUTPUT from PMU capabilities if intel_cap.pebs_output_pt_available is not set, but it incorrectly uses 'or' operation and leads to all PMU capabilities bits are set to 1 except bit PERF_PMU_CAP_AUX_OUTPUT. Testing this fix on Intel hybrid platforms, the observed issues disappear. Fixes: 97588df87b56 ("perf/x86/intel: Add common intel_pmu_init_hybrid()") Signed-off-by: Dapeng Mi Signed-off-by: Ingo Molnar Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20231121014628.729989-1-dapeng1.mi@linux.intel.com --- arch/x86/events/intel/core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/events/intel/core.c b/arch/x86/events/intel/core.c index a08f794a0e79..ce1c777227b4 100644 --- a/arch/x86/events/intel/core.c +++ b/arch/x86/events/intel/core.c @@ -4660,7 +4660,7 @@ static void intel_pmu_check_hybrid_pmus(struct x86_hybrid_pmu *pmu) if (pmu->intel_cap.pebs_output_pt_available) pmu->pmu.capabilities |= PERF_PMU_CAP_AUX_OUTPUT; else - pmu->pmu.capabilities |= ~PERF_PMU_CAP_AUX_OUTPUT; + pmu->pmu.capabilities &= ~PERF_PMU_CAP_AUX_OUTPUT; intel_pmu_check_event_constraints(pmu->event_constraints, pmu->num_counters, -- cgit v1.2.3 From 8771127e25d6c20d458ad27cf32f7fcfc1755e05 Mon Sep 17 00:00:00 2001 From: Lech Perczak Date: Sat, 18 Nov 2023 00:19:17 +0100 Subject: USB: serial: option: don't claim interface 4 for ZTE MF290 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Interface 4 is used by for QMI interface in stock firmware of MF28D, the router which uses MF290 modem. Free the interface up, to rebind it to qmi_wwan driver. The proper configuration is: Interface mapping is: 0: QCDM, 1: (unknown), 2: AT (PCUI), 2: AT (Modem), 4: QMI T: Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 4 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=19d2 ProdID=0189 Rev= 0.00 S: Manufacturer=ZTE, Incorporated S: Product=ZTE LTE Technologies MSM C:* #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=84(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=86(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms Cc: Bjørn Mork Signed-off-by: Lech Perczak Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold --- drivers/usb/serial/option.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 45dcfaadaf98..ff9049db6e65 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -1546,7 +1546,8 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0165, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0167, 0xff, 0xff, 0xff), .driver_info = RSVD(4) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0189, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0189, 0xff, 0xff, 0xff), + .driver_info = RSVD(4) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0191, 0xff, 0xff, 0xff), /* ZTE EuFi890 */ .driver_info = RSVD(4) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0196, 0xff, 0xff, 0xff) }, -- cgit v1.2.3 From a1092619dd28ac0fcf23016160a2fdccd98ef935 Mon Sep 17 00:00:00 2001 From: Puliang Lu Date: Thu, 26 Oct 2023 20:35:06 +0800 Subject: USB: serial: option: fix FM101R-GL defines Modify the definition of the two Fibocom FM101R-GL PID macros, which had their PIDs switched. The correct PIDs are: - VID:PID 413C:8213, FM101R-GL ESIM are laptop M.2 cards (with MBIM interfaces for Linux) - VID:PID 413C:8215, FM101R-GL are laptop M.2 cards (with MBIM interface for Linux) 0x8213: mbim, tty 0x8215: mbim, tty Signed-off-by: Puliang Lu Fixes: 52480e1f1a25 ("USB: serial: option: add Fibocom to DELL custom modem FM101R-GL") Link: https://lore.kernel.org/lkml/TYZPR02MB508845BAD7936A62A105CE5D89DFA@TYZPR02MB5088.apcprd02.prod.outlook.com/ Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold --- drivers/usb/serial/option.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index ff9049db6e65..9c76095ebfe1 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -203,8 +203,8 @@ static void option_instat_callback(struct urb *urb); #define DELL_PRODUCT_5829E_ESIM 0x81e4 #define DELL_PRODUCT_5829E 0x81e6 -#define DELL_PRODUCT_FM101R 0x8213 -#define DELL_PRODUCT_FM101R_ESIM 0x8215 +#define DELL_PRODUCT_FM101R_ESIM 0x8213 +#define DELL_PRODUCT_FM101R 0x8215 #define KYOCERA_VENDOR_ID 0x0c88 #define KYOCERA_PRODUCT_KPC650 0x17da -- cgit v1.2.3 From 5b4ffb176d7979ac66b349addf3f7de433335e00 Mon Sep 17 00:00:00 2001 From: Jiri Kosina Date: Tue, 21 Nov 2023 14:38:11 +0100 Subject: Revert "HID: logitech-dj: Add support for a new lightspeed receiver iteration" This reverts commit 9d1bd9346241cd6963b58da7ffb7ed303285f684. Multiple people reported misbehaving devices and reverting this commit fixes the problem for them. As soon as the original commit author starts reacting again, we can try to figure out why he hasn't seen the issues (mismatching report descriptors?), but for the time being, fix for 6.7 by reverting. Link: https://bugzilla.kernel.org/show_bug.cgi?id=218172 Link: https://bugzilla.kernel.org/show_bug.cgi?id=218094 Cc: Signed-off-by: Jiri Kosina --- drivers/hid/hid-ids.h | 1 - drivers/hid/hid-logitech-dj.c | 11 +++-------- 2 files changed, 3 insertions(+), 9 deletions(-) diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h index 125c73a20051..c6e4e0d1f214 100644 --- a/drivers/hid/hid-ids.h +++ b/drivers/hid/hid-ids.h @@ -868,7 +868,6 @@ #define USB_DEVICE_ID_LOGITECH_NANO_RECEIVER_2 0xc534 #define USB_DEVICE_ID_LOGITECH_NANO_RECEIVER_LIGHTSPEED_1 0xc539 #define USB_DEVICE_ID_LOGITECH_NANO_RECEIVER_LIGHTSPEED_1_1 0xc53f -#define USB_DEVICE_ID_LOGITECH_NANO_RECEIVER_LIGHTSPEED_1_2 0xc547 #define USB_DEVICE_ID_LOGITECH_NANO_RECEIVER_POWERPLAY 0xc53a #define USB_DEVICE_ID_SPACETRAVELLER 0xc623 #define USB_DEVICE_ID_SPACENAVIGATOR 0xc626 diff --git a/drivers/hid/hid-logitech-dj.c b/drivers/hid/hid-logitech-dj.c index 8afe3be683ba..e6a8b6d8eab7 100644 --- a/drivers/hid/hid-logitech-dj.c +++ b/drivers/hid/hid-logitech-dj.c @@ -1695,12 +1695,11 @@ static int logi_dj_raw_event(struct hid_device *hdev, } /* * Mouse-only receivers send unnumbered mouse data. The 27 MHz - * receiver uses 6 byte packets, the nano receiver 8 bytes, - * the lightspeed receiver (Pro X Superlight) 13 bytes. + * receiver uses 6 byte packets, the nano receiver 8 bytes. */ if (djrcv_dev->unnumbered_application == HID_GD_MOUSE && - size <= 13){ - u8 mouse_report[14]; + size <= 8) { + u8 mouse_report[9]; /* Prepend report id */ mouse_report[0] = REPORT_TYPE_MOUSE; @@ -1984,10 +1983,6 @@ static const struct hid_device_id logi_dj_receivers[] = { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_NANO_RECEIVER_LIGHTSPEED_1_1), .driver_data = recvr_type_gaming_hidpp}, - { /* Logitech lightspeed receiver (0xc547) */ - HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, - USB_DEVICE_ID_LOGITECH_NANO_RECEIVER_LIGHTSPEED_1_2), - .driver_data = recvr_type_gaming_hidpp}, { /* Logitech 27 MHz HID++ 1.0 receiver (0xc513) */ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_MX3000_RECEIVER), -- cgit v1.2.3 From 9c6dc13106f2dd2d6819d66618b25a6f41f0ee6a Mon Sep 17 00:00:00 2001 From: Simon Horman Date: Mon, 20 Nov 2023 08:28:40 +0000 Subject: MAINTAINERS: Add indirect_call_wrapper.h to NETWORKING [GENERAL] indirect_call_wrapper.h is not, strictly speaking, networking specific. However, it's git history indicates that in practice changes go through netdev and thus the netdev maintainers have effectively been taking responsibility for it. Formalise this by adding it to the NETWORKING [GENERAL] section in the MAINTAINERS file. It is not clear how many other files under include/linux fall into this category and it would be interesting, as a follow-up, to audit that and propose further updates to the MAINTAINERS file as appropriate. Link: https://lore.kernel.org/netdev/20231116010310.4664dd38@kernel.org/ Signed-off-by: Simon Horman Link: https://lore.kernel.org/r/20231120-indirect_call_wrapper-maintainer-v1-1-0a6bb1f7363e@kernel.org Signed-off-by: Paolo Abeni --- MAINTAINERS | 1 + 1 file changed, 1 insertion(+) diff --git a/MAINTAINERS b/MAINTAINERS index 80a95878c61d..6cc0708f77b4 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -15057,6 +15057,7 @@ F: Documentation/networking/ F: Documentation/process/maintainer-netdev.rst F: Documentation/userspace-api/netlink/ F: include/linux/in.h +F: include/linux/indirect_call_wrapper.h F: include/linux/net.h F: include/linux/netdevice.h F: include/net/ -- cgit v1.2.3 From 41058707bea93b979c4854bdb857e46f2b85df92 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Fri, 10 Nov 2023 14:48:02 +0100 Subject: dt-bindings: usb: hcd: add missing phy name to example The example host controller node has two PHYs and therefore needs two PHY names. Fixes: 3aa3c66aedef ("dt-bindings: usb: Bring back phy-names") Signed-off-by: Johan Hovold Reviewed-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20231110134802.32060-1-johan+linaro@kernel.org Signed-off-by: Greg Kroah-Hartman --- Documentation/devicetree/bindings/usb/usb-hcd.yaml | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/usb/usb-hcd.yaml b/Documentation/devicetree/bindings/usb/usb-hcd.yaml index 692dd60e3f73..45a19d4928af 100644 --- a/Documentation/devicetree/bindings/usb/usb-hcd.yaml +++ b/Documentation/devicetree/bindings/usb/usb-hcd.yaml @@ -41,7 +41,7 @@ examples: - | usb { phys = <&usb2_phy1>, <&usb3_phy1>; - phy-names = "usb"; + phy-names = "usb2", "usb3"; #address-cells = <1>; #size-cells = <0>; -- cgit v1.2.3 From a6fe37f428c19dd164c2111157d4a1029bd853aa Mon Sep 17 00:00:00 2001 From: Badhri Jagan Sridharan Date: Wed, 1 Nov 2023 02:19:09 +0000 Subject: usb: typec: tcpm: Skip hard reset when in error recovery Hard reset queued prior to error recovery (or) received during error recovery will make TCPM to prematurely exit error recovery sequence. Ignore hard resets received during error recovery (or) port reset sequence. ``` [46505.459688] state change SNK_READY -> ERROR_RECOVERY [rev3 NONE_AMS] [46505.459706] state change ERROR_RECOVERY -> PORT_RESET [rev3 NONE_AMS] [46505.460433] disable vbus discharge ret:0 [46505.461226] Setting usb_comm capable false [46505.467244] Setting voltage/current limit 0 mV 0 mA [46505.467262] polarity 0 [46505.470695] Requesting mux state 0, usb-role 0, orientation 0 [46505.475621] cc:=0 [46505.476012] pending state change PORT_RESET -> PORT_RESET_WAIT_OFF @ 100 ms [rev3 NONE_AMS] [46505.476020] Received hard reset [46505.476024] state change PORT_RESET -> HARD_RESET_START [rev3 HARD_RESET] ``` Cc: stable@vger.kernel.org Fixes: f0690a25a140 ("staging: typec: USB Type-C Port Manager (tcpm)") Signed-off-by: Badhri Jagan Sridharan Acked-by: Heikki Krogeus Reviewed-by: Guenter Roeck Link: https://lore.kernel.org/r/20231101021909.2962679-1-badhri@google.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/typec/tcpm/tcpm.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/drivers/usb/typec/tcpm/tcpm.c b/drivers/usb/typec/tcpm/tcpm.c index 058d5b853b57..b386102f7a3a 100644 --- a/drivers/usb/typec/tcpm/tcpm.c +++ b/drivers/usb/typec/tcpm/tcpm.c @@ -5391,6 +5391,15 @@ static void _tcpm_pd_hard_reset(struct tcpm_port *port) if (port->bist_request == BDO_MODE_TESTDATA && port->tcpc->set_bist_data) port->tcpc->set_bist_data(port->tcpc, false); + switch (port->state) { + case ERROR_RECOVERY: + case PORT_RESET: + case PORT_RESET_WAIT_OFF: + return; + default: + break; + } + if (port->ams != NONE_AMS) port->ams = NONE_AMS; if (port->hard_reset_count < PD_N_HARD_RESET_COUNT) -- cgit v1.2.3 From cdd0cde8d8837de3d234bb08115d5f196e0ac8dd Mon Sep 17 00:00:00 2001 From: Christophe JAILLET Date: Mon, 30 Oct 2023 07:56:40 +0100 Subject: USB: typec: tps6598x: Fix a memory leak in an error handling path All error handling end to the error handling path, except these ones. Go to 'release_fw' as well here, otherwise 'fw' is leaking. Fixes: 7e7a3c815d22 ("USB: typec: tps6598x: Add TPS25750 support") Signed-off-by: Christophe JAILLET Acked-by: Heikki Krogerus Link: https://lore.kernel.org/r/23168336f18a9f6cb1a5b47130fc134dc0510d7f.1698648980.git.christophe.jaillet@wanadoo.fr Signed-off-by: Greg Kroah-Hartman --- drivers/usb/typec/tipd/core.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/usb/typec/tipd/core.c b/drivers/usb/typec/tipd/core.c index 0e867f531d34..b0184be06c3d 100644 --- a/drivers/usb/typec/tipd/core.c +++ b/drivers/usb/typec/tipd/core.c @@ -968,16 +968,17 @@ static int tps25750_start_patch_burst_mode(struct tps6598x *tps) ret = of_property_match_string(np, "reg-names", "patch-address"); if (ret < 0) { dev_err(tps->dev, "failed to get patch-address %d\n", ret); - return ret; + goto release_fw; } ret = of_property_read_u32_index(np, "reg", ret, &addr); if (ret) - return ret; + goto release_fw; if (addr == 0 || (addr >= 0x20 && addr <= 0x23)) { dev_err(tps->dev, "wrong patch address %u\n", addr); - return -EINVAL; + ret = -EINVAL; + goto release_fw; } bpms_data.addr = (u8)addr; -- cgit v1.2.3 From 10d510abd096d620b9fda2dd3e0047c5efc4ad2b Mon Sep 17 00:00:00 2001 From: Alexander Stein Date: Wed, 25 Oct 2023 11:51:10 +0200 Subject: usb: dwc3: Fix default mode initialization The default mode, configurable by DT, shall be set before usb role switch driver is registered. Otherwise there is a race between default mode and mode set by usb role switch driver. Fixes: 98ed256a4dbad ("usb: dwc3: Add support for role-switch-default-mode binding") Cc: stable Signed-off-by: Alexander Stein Acked-by: Thinh Nguyen Link: https://lore.kernel.org/r/20231025095110.2405281-1-alexander.stein@ew.tq-group.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/dwc3/drd.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/dwc3/drd.c b/drivers/usb/dwc3/drd.c index 039bf241769a..57ddd2e43022 100644 --- a/drivers/usb/dwc3/drd.c +++ b/drivers/usb/dwc3/drd.c @@ -505,6 +505,7 @@ static int dwc3_setup_role_switch(struct dwc3 *dwc) dwc->role_switch_default_mode = USB_DR_MODE_PERIPHERAL; mode = DWC3_GCTL_PRTCAP_DEVICE; } + dwc3_set_mode(dwc, mode); dwc3_role_switch.fwnode = dev_fwnode(dwc->dev); dwc3_role_switch.set = dwc3_usb_role_switch_set; @@ -526,7 +527,6 @@ static int dwc3_setup_role_switch(struct dwc3 *dwc) } } - dwc3_set_mode(dwc, mode); return 0; } #else -- cgit v1.2.3 From 187fb003c57c964ea61ac9fbfe41abf3ca9973eb Mon Sep 17 00:00:00 2001 From: Badhri Jagan Sridharan Date: Wed, 1 Nov 2023 01:28:45 +0000 Subject: usb: typec: tcpm: Fix sink caps op current check TCPM checks for sink caps operational current even when PD is disabled. This incorrectly sets tcpm_set_charge() when PD is disabled. Check for sink caps only when PD is enabled. [ 97.572342] Start toggling [ 97.578949] CC1: 0 -> 0, CC2: 0 -> 0 [state TOGGLING, polarity 0, disconnected] [ 99.571648] CC1: 0 -> 0, CC2: 0 -> 4 [state TOGGLING, polarity 0, connected] [ 99.571658] state change TOGGLING -> SNK_ATTACH_WAIT [rev3 NONE_AMS] [ 99.571673] pending state change SNK_ATTACH_WAIT -> SNK_DEBOUNCED @ 170 ms [rev3 NONE_AMS] [ 99.741778] state change SNK_ATTACH_WAIT -> SNK_DEBOUNCED [delayed 170 ms] [ 99.789283] CC1: 0 -> 0, CC2: 4 -> 5 [state SNK_DEBOUNCED, polarity 0, connected] [ 99.789306] state change SNK_DEBOUNCED -> SNK_DEBOUNCED [rev3 NONE_AMS] [ 99.903584] VBUS on [ 99.903591] state change SNK_DEBOUNCED -> SNK_ATTACHED [rev3 NONE_AMS] [ 99.903600] polarity 1 [ 99.910155] enable vbus discharge ret:0 [ 99.910160] Requesting mux state 1, usb-role 2, orientation 2 [ 99.946791] state change SNK_ATTACHED -> SNK_STARTUP [rev3 NONE_AMS] [ 99.946798] state change SNK_STARTUP -> SNK_DISCOVERY [rev3 NONE_AMS] [ 99.946800] Setting voltage/current limit 5000 mV 500 mA [ 99.946803] vbus=0 charge:=1 [ 100.027139] state change SNK_DISCOVERY -> SNK_READY [rev3 NONE_AMS] [ 100.027145] Setting voltage/current limit 5000 mV 3000 mA [ 100.466830] VBUS on Cc: stable@vger.kernel.org Fixes: 803b1c8a0cea ("usb: typec: tcpm: not sink vbus if operational current is 0mA") Signed-off-by: Badhri Jagan Sridharan Reviewed-by: Guenter Roeck Acked-by: Heikki Krogerus Tested-by: Will McVicker Link: https://lore.kernel.org/r/20231101012845.2701348-1-badhri@google.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/typec/tcpm/tcpm.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/usb/typec/tcpm/tcpm.c b/drivers/usb/typec/tcpm/tcpm.c index b386102f7a3a..bfb6f9481e87 100644 --- a/drivers/usb/typec/tcpm/tcpm.c +++ b/drivers/usb/typec/tcpm/tcpm.c @@ -4273,7 +4273,8 @@ static void run_state_machine(struct tcpm_port *port) current_lim = PD_P_SNK_STDBY_MW / 5; tcpm_set_current_limit(port, current_lim, 5000); /* Not sink vbus if operational current is 0mA */ - tcpm_set_charge(port, !!pdo_max_current(port->snk_pdo[0])); + tcpm_set_charge(port, !port->pd_supported || + pdo_max_current(port->snk_pdo[0])); if (!port->pd_supported) tcpm_set_state(port, SNK_READY, 0); -- cgit v1.2.3 From 58f2fcb3a845fcbbad2f3196bb37d744e0506250 Mon Sep 17 00:00:00 2001 From: Pawel Laszczak Date: Wed, 8 Nov 2023 10:31:25 +0100 Subject: usb: cdnsp: Fix deadlock issue during using NCM gadget The interrupt service routine registered for the gadget is a primary handler which mask the interrupt source and a threaded handler which handles the source of the interrupt. Since the threaded handler is voluntary threaded, the IRQ-core does not disable bottom halves before invoke the handler like it does for the forced-threaded handler. Due to changes in networking it became visible that a network gadget's completions handler may schedule a softirq which remains unprocessed. The gadget's completion handler is usually invoked either in hard-IRQ or soft-IRQ context. In this context it is enough to just raise the softirq because the softirq itself will be handled once that context is left. In the case of the voluntary threaded handler, there is nothing that will process pending softirqs. Which means it remain queued until another random interrupt (on this CPU) fires and handles it on its exit path or another thread locks and unlocks a lock with the bh suffix. Worst case is that the CPU goes idle and the NOHZ complains about unhandled softirqs. Disable bottom halves before acquiring the lock (and disabling interrupts) and enable them after dropping the lock. This ensures that any pending softirqs will handled right away. cc: stable@vger.kernel.org Fixes: 3d82904559f4 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver") Signed-off-by: Pawel Laszczak Acked-by: Peter Chen Link: https://lore.kernel.org/r/20231108093125.224963-1-pawell@cadence.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/cdns3/cdnsp-ring.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/usb/cdns3/cdnsp-ring.c b/drivers/usb/cdns3/cdnsp-ring.c index af981778382d..02f297f5637d 100644 --- a/drivers/usb/cdns3/cdnsp-ring.c +++ b/drivers/usb/cdns3/cdnsp-ring.c @@ -1529,6 +1529,7 @@ irqreturn_t cdnsp_thread_irq_handler(int irq, void *data) unsigned long flags; int counter = 0; + local_bh_disable(); spin_lock_irqsave(&pdev->lock, flags); if (pdev->cdnsp_state & (CDNSP_STATE_HALTED | CDNSP_STATE_DYING)) { @@ -1541,6 +1542,7 @@ irqreturn_t cdnsp_thread_irq_handler(int irq, void *data) cdnsp_died(pdev); spin_unlock_irqrestore(&pdev->lock, flags); + local_bh_enable(); return IRQ_HANDLED; } @@ -1557,6 +1559,7 @@ irqreturn_t cdnsp_thread_irq_handler(int irq, void *data) cdnsp_update_erst_dequeue(pdev, event_ring_deq, 1); spin_unlock_irqrestore(&pdev->lock, flags); + local_bh_enable(); return IRQ_HANDLED; } -- cgit v1.2.3 From 30ce1c03a083c9dc131d09d28ba1bcaafa3d8df2 Mon Sep 17 00:00:00 2001 From: Wentong Wu Date: Tue, 14 Nov 2023 15:25:31 +0800 Subject: usb: misc: ljca: Drop _ADR support to get ljca children devices Currently the shipped platforms use only _HID to distinguish ljca children devices. The _ADR support here is for future HW. This patch is to drop _ADR support and we can then re-introduce it (revert this patch) if future HW actually starts using _ADR to distinguish children devices. Signed-off-by: Wentong Wu Reviewed-by: Hans de Goede Reviewed-by: Andy Shevchenko Link: https://lore.kernel.org/r/20231114072531.1366753-1-wentong.wu@intel.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/misc/usb-ljca.c | 14 ++------------ 1 file changed, 2 insertions(+), 12 deletions(-) diff --git a/drivers/usb/misc/usb-ljca.c b/drivers/usb/misc/usb-ljca.c index c9decd0396d4..7f0deebebc13 100644 --- a/drivers/usb/misc/usb-ljca.c +++ b/drivers/usb/misc/usb-ljca.c @@ -457,8 +457,8 @@ static void ljca_auxdev_acpi_bind(struct ljca_adapter *adap, u64 adr, u8 id) { struct ljca_match_ids_walk_data wd = { 0 }; - struct acpi_device *parent, *adev; struct device *dev = adap->dev; + struct acpi_device *parent; char uid[4]; parent = ACPI_COMPANION(dev); @@ -466,17 +466,7 @@ static void ljca_auxdev_acpi_bind(struct ljca_adapter *adap, return; /* - * get auxdev ACPI handle from the ACPI device directly - * under the parent that matches _ADR. - */ - adev = acpi_find_child_device(parent, adr, false); - if (adev) { - ACPI_COMPANION_SET(&auxdev->dev, adev); - return; - } - - /* - * _ADR is a grey area in the ACPI specification, some + * Currently LJCA hw doesn't use _ADR instead the shipped * platforms use _HID to distinguish children devices. */ switch (adr) { -- cgit v1.2.3 From 0583bc776ca5b5a3f5752869fc31cf7322df2b35 Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Wed, 15 Nov 2023 15:45:07 +0100 Subject: USB: dwc2: write HCINT with INTMASK applied dwc2_hc_n_intr() writes back INTMASK as read but evaluates it with intmask applied. In stress testing this causes spurious interrupts like this: [Mon Aug 14 10:51:07 2023] dwc2 3f980000.usb: dwc2_hc_chhltd_intr_dma: Channel 7 - ChHltd set, but reason is unknown [Mon Aug 14 10:51:07 2023] dwc2 3f980000.usb: hcint 0x00000002, intsts 0x04600001 [Mon Aug 14 10:51:08 2023] dwc2 3f980000.usb: dwc2_hc_chhltd_intr_dma: Channel 0 - ChHltd set, but reason is unknown [Mon Aug 14 10:51:08 2023] dwc2 3f980000.usb: hcint 0x00000002, intsts 0x04600001 [Mon Aug 14 10:51:08 2023] dwc2 3f980000.usb: dwc2_hc_chhltd_intr_dma: Channel 4 - ChHltd set, but reason is unknown [Mon Aug 14 10:51:08 2023] dwc2 3f980000.usb: hcint 0x00000002, intsts 0x04600001 [Mon Aug 14 10:51:08 2023] dwc2 3f980000.usb: dwc2_update_urb_state_abn(): trimming xfer length Applying INTMASK prevents this. The issue exists in all versions of the driver. Signed-off-by: Oliver Neukum Tested-by: Ivan Ivanov Tested-by: Andrea della Porta Link: https://lore.kernel.org/r/20231115144514.15248-1-oneukum@suse.com Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/dwc2/hcd_intr.c | 15 +++++++-------- 1 file changed, 7 insertions(+), 8 deletions(-) diff --git a/drivers/usb/dwc2/hcd_intr.c b/drivers/usb/dwc2/hcd_intr.c index 0144ca8350c3..5c7538d498dd 100644 --- a/drivers/usb/dwc2/hcd_intr.c +++ b/drivers/usb/dwc2/hcd_intr.c @@ -2015,15 +2015,17 @@ static void dwc2_hc_n_intr(struct dwc2_hsotg *hsotg, int chnum) { struct dwc2_qtd *qtd; struct dwc2_host_chan *chan; - u32 hcint, hcintmsk; + u32 hcint, hcintraw, hcintmsk; chan = hsotg->hc_ptr_array[chnum]; - hcint = dwc2_readl(hsotg, HCINT(chnum)); + hcintraw = dwc2_readl(hsotg, HCINT(chnum)); hcintmsk = dwc2_readl(hsotg, HCINTMSK(chnum)); + hcint = hcintraw & hcintmsk; + dwc2_writel(hsotg, hcint, HCINT(chnum)); + if (!chan) { dev_err(hsotg->dev, "## hc_ptr_array for channel is NULL ##\n"); - dwc2_writel(hsotg, hcint, HCINT(chnum)); return; } @@ -2032,11 +2034,9 @@ static void dwc2_hc_n_intr(struct dwc2_hsotg *hsotg, int chnum) chnum); dev_vdbg(hsotg->dev, " hcint 0x%08x, hcintmsk 0x%08x, hcint&hcintmsk 0x%08x\n", - hcint, hcintmsk, hcint & hcintmsk); + hcintraw, hcintmsk, hcint); } - dwc2_writel(hsotg, hcint, HCINT(chnum)); - /* * If we got an interrupt after someone called * dwc2_hcd_endpoint_disable() we don't want to crash below @@ -2046,8 +2046,7 @@ static void dwc2_hc_n_intr(struct dwc2_hsotg *hsotg, int chnum) return; } - chan->hcint = hcint; - hcint &= hcintmsk; + chan->hcint = hcintraw; /* * If the channel was halted due to a dequeue, the qtd list might -- cgit v1.2.3 From 791cd7afe51b0c770264836ab0607766e3e80f52 Mon Sep 17 00:00:00 2001 From: Stanley Chang Date: Fri, 17 Nov 2023 15:03:05 +0800 Subject: usb: dwc3: add missing of_node_put and platform_device_put of_get_compatible_child performs an of_node_get, so an of_node_put is required. Add platform_device_put to match with of_find_device_by_node. Fixes: 34c200483569 ("usb: dwc3: add Realtek DHC RTD SoC dwc3 glue layer driver") Signed-off-by: Stanley Chang Acked-by: Thinh Nguyen Link: https://lore.kernel.org/r/20231117070311.32502-1-stanley_chang@realtek.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/dwc3/dwc3-rtk.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/drivers/usb/dwc3/dwc3-rtk.c b/drivers/usb/dwc3/dwc3-rtk.c index 590028e8fdcb..3cd6b184551c 100644 --- a/drivers/usb/dwc3/dwc3-rtk.c +++ b/drivers/usb/dwc3/dwc3-rtk.c @@ -183,10 +183,13 @@ static enum usb_device_speed __get_dwc3_maximum_speed(struct device_node *np) ret = of_property_read_string(dwc3_np, "maximum-speed", &maximum_speed); if (ret < 0) - return USB_SPEED_UNKNOWN; + goto out; ret = match_string(speed_names, ARRAY_SIZE(speed_names), maximum_speed); +out: + of_node_put(dwc3_np); + return (ret < 0) ? USB_SPEED_UNKNOWN : ret; } @@ -339,6 +342,9 @@ static int dwc3_rtk_probe_dwc3_core(struct dwc3_rtk *rtk) switch_usb2_role(rtk, rtk->cur_role); + platform_device_put(dwc3_pdev); + of_node_put(dwc3_node); + return 0; err_pdev_put: -- cgit v1.2.3 From 974bba5c118f4c2baf00de0356e3e4f7928b4cbc Mon Sep 17 00:00:00 2001 From: Niklas Neronin Date: Wed, 15 Nov 2023 14:13:25 +0200 Subject: usb: config: fix iteration issue in 'usb_get_bos_descriptor()' The BOS descriptor defines a root descriptor and is the base descriptor for accessing a family of related descriptors. Function 'usb_get_bos_descriptor()' encounters an iteration issue when skipping the 'USB_DT_DEVICE_CAPABILITY' descriptor type. This results in the same descriptor being read repeatedly. To address this issue, a 'goto' statement is introduced to ensure that the pointer and the amount read is updated correctly. This ensures that the function iterates to the next descriptor instead of reading the same descriptor repeatedly. Cc: stable@vger.kernel.org Fixes: 3dd550a2d365 ("USB: usbcore: Fix slab-out-of-bounds bug during device reset") Signed-off-by: Niklas Neronin Acked-by: Mathias Nyman Reviewed-by: Alan Stern Link: https://lore.kernel.org/r/20231115121325.471454-1-niklas.neronin@linux.intel.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/config.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/usb/core/config.c b/drivers/usb/core/config.c index b19e38d5fd10..7f8d33f92ddb 100644 --- a/drivers/usb/core/config.c +++ b/drivers/usb/core/config.c @@ -1047,7 +1047,7 @@ int usb_get_bos_descriptor(struct usb_device *dev) if (cap->bDescriptorType != USB_DT_DEVICE_CAPABILITY) { dev_notice(ddev, "descriptor type invalid, skip\n"); - continue; + goto skip_to_next_descriptor; } switch (cap_type) { @@ -1078,6 +1078,7 @@ int usb_get_bos_descriptor(struct usb_device *dev) break; } +skip_to_next_descriptor: total_len -= length; buffer += length; } -- cgit v1.2.3 From 8bbae288a85abed6a1cf7d185d8b9dc2f5dcb12c Mon Sep 17 00:00:00 2001 From: Ricardo Ribalda Date: Fri, 27 Oct 2023 11:28:20 +0000 Subject: usb: dwc3: set the dma max_seg_size Allow devices to have dma operations beyond 4K, and avoid warnings such as: DMA-API: dwc3 a600000.usb: mapping sg segment longer than device claims to support [len=86016] [max=65536] Cc: stable@vger.kernel.org Fixes: 72246da40f37 ("usb: Introduce DesignWare USB3 DRD Driver") Reported-by: Zubin Mithra Signed-off-by: Ricardo Ribalda Acked-by: Thinh Nguyen Link: https://lore.kernel.org/r/20231026-dwc3-v2-1-1d4fd5c3e067@chromium.org Signed-off-by: Greg Kroah-Hartman --- drivers/usb/dwc3/core.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index 0328c86ef806..b101dbf8c5dc 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -2034,6 +2034,8 @@ static int dwc3_probe(struct platform_device *pdev) pm_runtime_put(dev); + dma_set_max_seg_size(dev, UINT_MAX); + return 0; err_exit_debugfs: -- cgit v1.2.3 From 61d2cf0db741827724d33079b4a54bf99a32b8e5 Mon Sep 17 00:00:00 2001 From: Chunfeng Yun Date: Sat, 18 Nov 2023 11:30:11 +0800 Subject: usb: xhci-mtk: fix in-ep's start-split check failure It's wrong to use the data length in a CS (in uframe x) to check whether there is a SS (in uframe x-2), because for a isoc-in ep, it may need some CS to receive data; Save the count of SS in a uframe for isoc/intr in-eps to fix the issue. Fixes: 5c954e030f55 ("usb: xhci-mtk: improve split scheduling by separate IN/OUT budget") Signed-off-by: Chunfeng Yun Link: https://lore.kernel.org/r/20231118033011.22033-1-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-mtk-sch.c | 13 ++++++++++--- drivers/usb/host/xhci-mtk.h | 2 ++ 2 files changed, 12 insertions(+), 3 deletions(-) diff --git a/drivers/usb/host/xhci-mtk-sch.c b/drivers/usb/host/xhci-mtk-sch.c index 5b3cd455adec..61f3f8bbdcea 100644 --- a/drivers/usb/host/xhci-mtk-sch.c +++ b/drivers/usb/host/xhci-mtk-sch.c @@ -650,9 +650,8 @@ static int check_isoc_ss_overlap(struct mu3h_sch_ep_info *sch_ep, u32 offset) if (sch_ep->ep_type == ISOC_OUT_EP) { for (j = 0; j < sch_ep->num_budget_microframes; j++) { - k = XHCI_MTK_BW_INDEX(base + j + CS_OFFSET); - /* use cs to indicate existence of in-ss @(base+j) */ - if (tt->fs_bus_bw_in[k]) + k = XHCI_MTK_BW_INDEX(base + j); + if (tt->in_ss_cnt[k]) return -ESCH_SS_OVERLAP; } } else if (sch_ep->ep_type == ISOC_IN_EP || sch_ep->ep_type == INT_IN_EP) { @@ -769,6 +768,14 @@ static void update_sch_tt(struct mu3h_sch_ep_info *sch_ep, bool used) tt->fs_frame_bw[f] -= (u16)sch_ep->bw_budget_table[j]; } } + + if (sch_ep->ep_type == ISOC_IN_EP || sch_ep->ep_type == INT_IN_EP) { + k = XHCI_MTK_BW_INDEX(base); + if (used) + tt->in_ss_cnt[k]++; + else + tt->in_ss_cnt[k]--; + } } if (used) diff --git a/drivers/usb/host/xhci-mtk.h b/drivers/usb/host/xhci-mtk.h index 865b55e23b15..39f7ae7d3087 100644 --- a/drivers/usb/host/xhci-mtk.h +++ b/drivers/usb/host/xhci-mtk.h @@ -38,6 +38,7 @@ * @fs_bus_bw_in: save bandwidth used by FS/LS IN eps in each uframes * @ls_bus_bw: save bandwidth used by LS eps in each uframes * @fs_frame_bw: save bandwidth used by FS/LS eps in each FS frames + * @in_ss_cnt: the count of Start-Split for IN eps * @ep_list: Endpoints using this TT */ struct mu3h_sch_tt { @@ -45,6 +46,7 @@ struct mu3h_sch_tt { u16 fs_bus_bw_in[XHCI_MTK_MAX_ESIT]; u8 ls_bus_bw[XHCI_MTK_MAX_ESIT]; u16 fs_frame_bw[XHCI_MTK_FRAMES_CNT]; + u8 in_ss_cnt[XHCI_MTK_MAX_ESIT]; struct list_head ep_list; }; -- cgit v1.2.3 From 4b435764f7c2922822962e7f6343cce645d502f1 Mon Sep 17 00:00:00 2001 From: Heikki Krogerus Date: Tue, 21 Nov 2023 13:46:47 +0200 Subject: usb: typec: tipd: Supply also I2C driver data If there is no fwnode, device_get_match_data() does not return anything making the probe to always fail. Using i2c_get_match_data() when there is no fwnode to fix that. Fixes: 5bd4853da049 ("USB: typec: tps6598x: Add device data to of_device_id") Signed-off-by: Heikki Krogerus Link: https://lore.kernel.org/r/20231121114647.2005011-1-heikki.krogerus@linux.intel.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/typec/tipd/core.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/usb/typec/tipd/core.c b/drivers/usb/typec/tipd/core.c index b0184be06c3d..196535ad996d 100644 --- a/drivers/usb/typec/tipd/core.c +++ b/drivers/usb/typec/tipd/core.c @@ -1227,7 +1227,10 @@ static int tps6598x_probe(struct i2c_client *client) TPS_REG_INT_PLUG_EVENT; } - tps->data = device_get_match_data(tps->dev); + if (dev_fwnode(tps->dev)) + tps->data = device_get_match_data(tps->dev); + else + tps->data = i2c_get_match_data(client); if (!tps->data) return -EINVAL; @@ -1426,7 +1429,7 @@ static const struct of_device_id tps6598x_of_match[] = { MODULE_DEVICE_TABLE(of, tps6598x_of_match); static const struct i2c_device_id tps6598x_id[] = { - { "tps6598x" }, + { "tps6598x", (kernel_ulong_t)&tps6598x_data }, { } }; MODULE_DEVICE_TABLE(i2c, tps6598x_id); -- cgit v1.2.3 From 16b7e0cccb243033de4406ffb4d892365041a1e7 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Fri, 3 Nov 2023 17:43:23 +0100 Subject: USB: xhci-plat: fix legacy PHY double init Commits 7b8ef22ea547 ("usb: xhci: plat: Add USB phy support") and 9134c1fd0503 ("usb: xhci: plat: Add USB 3.0 phy support") added support for looking up legacy PHYs from the sysdev devicetree node and initialising them. This broke drivers such as dwc3 which manages PHYs themself as the PHYs would now be initialised twice, something which specifically can lead to resources being left enabled during suspend (e.g. with the usb_phy_generic PHY driver). As the dwc3 driver uses driver-name matching for the xhci platform device, fix this by only looking up and initialising PHYs for devices that have been matched using OF. Note that checking that the platform device has a devicetree node would currently be sufficient, but that could lead to subtle breakages in case anyone ever tries to reuse an ancestor's node. Fixes: 7b8ef22ea547 ("usb: xhci: plat: Add USB phy support") Fixes: 9134c1fd0503 ("usb: xhci: plat: Add USB 3.0 phy support") Cc: stable@vger.kernel.org # 4.1 Cc: Maxime Ripard Cc: Stanley Chang Signed-off-by: Johan Hovold Tested-by: Stefan Eichenberger Tested-by: Stanley Chang Link: https://lore.kernel.org/r/20231103164323.14294-1-johan+linaro@kernel.org Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-plat.c | 50 ++++++++++++++++++++++++++------------------ 1 file changed, 30 insertions(+), 20 deletions(-) diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c index b93161374293..732cdeb73920 100644 --- a/drivers/usb/host/xhci-plat.c +++ b/drivers/usb/host/xhci-plat.c @@ -13,6 +13,7 @@ #include #include #include +#include #include #include #include @@ -148,7 +149,7 @@ int xhci_plat_probe(struct platform_device *pdev, struct device *sysdev, const s int ret; int irq; struct xhci_plat_priv *priv = NULL; - + bool of_match; if (usb_disabled()) return -ENODEV; @@ -253,16 +254,23 @@ int xhci_plat_probe(struct platform_device *pdev, struct device *sysdev, const s &xhci->imod_interval); } - hcd->usb_phy = devm_usb_get_phy_by_phandle(sysdev, "usb-phy", 0); - if (IS_ERR(hcd->usb_phy)) { - ret = PTR_ERR(hcd->usb_phy); - if (ret == -EPROBE_DEFER) - goto disable_clk; - hcd->usb_phy = NULL; - } else { - ret = usb_phy_init(hcd->usb_phy); - if (ret) - goto disable_clk; + /* + * Drivers such as dwc3 manages PHYs themself (and rely on driver name + * matching for the xhci platform device). + */ + of_match = of_match_device(pdev->dev.driver->of_match_table, &pdev->dev); + if (of_match) { + hcd->usb_phy = devm_usb_get_phy_by_phandle(sysdev, "usb-phy", 0); + if (IS_ERR(hcd->usb_phy)) { + ret = PTR_ERR(hcd->usb_phy); + if (ret == -EPROBE_DEFER) + goto disable_clk; + hcd->usb_phy = NULL; + } else { + ret = usb_phy_init(hcd->usb_phy); + if (ret) + goto disable_clk; + } } hcd->tpl_support = of_usb_host_tpl_support(sysdev->of_node); @@ -285,15 +293,17 @@ int xhci_plat_probe(struct platform_device *pdev, struct device *sysdev, const s goto dealloc_usb2_hcd; } - xhci->shared_hcd->usb_phy = devm_usb_get_phy_by_phandle(sysdev, - "usb-phy", 1); - if (IS_ERR(xhci->shared_hcd->usb_phy)) { - xhci->shared_hcd->usb_phy = NULL; - } else { - ret = usb_phy_init(xhci->shared_hcd->usb_phy); - if (ret) - dev_err(sysdev, "%s init usb3phy fail (ret=%d)\n", - __func__, ret); + if (of_match) { + xhci->shared_hcd->usb_phy = devm_usb_get_phy_by_phandle(sysdev, + "usb-phy", 1); + if (IS_ERR(xhci->shared_hcd->usb_phy)) { + xhci->shared_hcd->usb_phy = NULL; + } else { + ret = usb_phy_init(xhci->shared_hcd->usb_phy); + if (ret) + dev_err(sysdev, "%s init usb3phy fail (ret=%d)\n", + __func__, ret); + } } xhci->shared_hcd->tpl_support = hcd->tpl_support; -- cgit v1.2.3 From 98c598afc22d4e43c2ad91860b65996d0c099a5d Mon Sep 17 00:00:00 2001 From: Li Nan Date: Mon, 11 Sep 2023 10:33:08 +0800 Subject: nbd: pass nbd_sock to nbd_read_reply() instead of index If a socket is processing ioctl 'NBD_SET_SOCK', config->socks might be krealloc in nbd_add_socket(), and a garbage request is received now, a UAF may occurs. T1 nbd_ioctl __nbd_ioctl nbd_add_socket blk_mq_freeze_queue T2 recv_work nbd_read_reply sock_xmit krealloc config->socks def config->socks Pass nbd_sock to nbd_read_reply(). And introduce a new function sock_xmit_recv(), which differs from sock_xmit only in the way it get socket. ================================================================== BUG: KASAN: use-after-free in sock_xmit+0x525/0x550 Read of size 8 at addr ffff8880188ec428 by task kworker/u12:1/18779 Workqueue: knbd4-recv recv_work Call Trace: __dump_stack dump_stack+0xbe/0xfd print_address_description.constprop.0+0x19/0x170 __kasan_report.cold+0x6c/0x84 kasan_report+0x3a/0x50 sock_xmit+0x525/0x550 nbd_read_reply+0xfe/0x2c0 recv_work+0x1c2/0x750 process_one_work+0x6b6/0xf10 worker_thread+0xdd/0xd80 kthread+0x30a/0x410 ret_from_fork+0x22/0x30 Allocated by task 18784: kasan_save_stack+0x1b/0x40 kasan_set_track set_alloc_info __kasan_kmalloc __kasan_kmalloc.constprop.0+0xf0/0x130 slab_post_alloc_hook slab_alloc_node slab_alloc __kmalloc_track_caller+0x157/0x550 __do_krealloc krealloc+0x37/0xb0 nbd_add_socket +0x2d3/0x880 __nbd_ioctl nbd_ioctl+0x584/0x8e0 __blkdev_driver_ioctl blkdev_ioctl+0x2a0/0x6e0 block_ioctl+0xee/0x130 vfs_ioctl __do_sys_ioctl __se_sys_ioctl+0x138/0x190 do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x61/0xc6 Freed by task 18784: kasan_save_stack+0x1b/0x40 kasan_set_track+0x1c/0x30 kasan_set_free_info+0x20/0x40 __kasan_slab_free.part.0+0x13f/0x1b0 slab_free_hook slab_free_freelist_hook slab_free kfree+0xcb/0x6c0 krealloc+0x56/0xb0 nbd_add_socket+0x2d3/0x880 __nbd_ioctl nbd_ioctl+0x584/0x8e0 __blkdev_driver_ioctl blkdev_ioctl+0x2a0/0x6e0 block_ioctl+0xee/0x130 vfs_ioctl __do_sys_ioctl __se_sys_ioctl+0x138/0x190 do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x61/0xc6 Signed-off-by: Li Nan Reviewed-by: Yu Kuai Reviewed-by: Ming Lei Link: https://lore.kernel.org/r/20230911023308.3467802-1-linan666@huaweicloud.com Signed-off-by: Jens Axboe --- drivers/block/nbd.c | 35 ++++++++++++++++++++++------------- 1 file changed, 22 insertions(+), 13 deletions(-) diff --git a/drivers/block/nbd.c b/drivers/block/nbd.c index 3f03cb3dc33c..b6414e1e645b 100644 --- a/drivers/block/nbd.c +++ b/drivers/block/nbd.c @@ -67,6 +67,7 @@ struct nbd_sock { struct recv_thread_args { struct work_struct work; struct nbd_device *nbd; + struct nbd_sock *nsock; int index; }; @@ -505,15 +506,9 @@ done: return BLK_EH_DONE; } -/* - * Send or receive packet. Return a positive value on success and - * negtive value on failue, and never return 0. - */ -static int sock_xmit(struct nbd_device *nbd, int index, int send, - struct iov_iter *iter, int msg_flags, int *sent) +static int __sock_xmit(struct nbd_device *nbd, struct socket *sock, int send, + struct iov_iter *iter, int msg_flags, int *sent) { - struct nbd_config *config = nbd->config; - struct socket *sock = config->socks[index]->sock; int result; struct msghdr msg; unsigned int noreclaim_flag; @@ -556,6 +551,19 @@ static int sock_xmit(struct nbd_device *nbd, int index, int send, return result; } +/* + * Send or receive packet. Return a positive value on success and + * negtive value on failure, and never return 0. + */ +static int sock_xmit(struct nbd_device *nbd, int index, int send, + struct iov_iter *iter, int msg_flags, int *sent) +{ + struct nbd_config *config = nbd->config; + struct socket *sock = config->socks[index]->sock; + + return __sock_xmit(nbd, sock, send, iter, msg_flags, sent); +} + /* * Different settings for sk->sk_sndtimeo can result in different return values * if there is a signal pending when we enter sendmsg, because reasons? @@ -712,7 +720,7 @@ out: return 0; } -static int nbd_read_reply(struct nbd_device *nbd, int index, +static int nbd_read_reply(struct nbd_device *nbd, struct socket *sock, struct nbd_reply *reply) { struct kvec iov = {.iov_base = reply, .iov_len = sizeof(*reply)}; @@ -721,7 +729,7 @@ static int nbd_read_reply(struct nbd_device *nbd, int index, reply->magic = 0; iov_iter_kvec(&to, ITER_DEST, &iov, 1, sizeof(*reply)); - result = sock_xmit(nbd, index, 0, &to, MSG_WAITALL, NULL); + result = __sock_xmit(nbd, sock, 0, &to, MSG_WAITALL, NULL); if (result < 0) { if (!nbd_disconnected(nbd->config)) dev_err(disk_to_dev(nbd->disk), @@ -845,14 +853,14 @@ static void recv_work(struct work_struct *work) struct nbd_device *nbd = args->nbd; struct nbd_config *config = nbd->config; struct request_queue *q = nbd->disk->queue; - struct nbd_sock *nsock; + struct nbd_sock *nsock = args->nsock; struct nbd_cmd *cmd; struct request *rq; while (1) { struct nbd_reply reply; - if (nbd_read_reply(nbd, args->index, &reply)) + if (nbd_read_reply(nbd, nsock->sock, &reply)) break; /* @@ -887,7 +895,6 @@ static void recv_work(struct work_struct *work) percpu_ref_put(&q->q_usage_counter); } - nsock = config->socks[args->index]; mutex_lock(&nsock->tx_lock); nbd_mark_nsock_dead(nbd, nsock, 1); mutex_unlock(&nsock->tx_lock); @@ -1231,6 +1238,7 @@ static int nbd_reconnect_socket(struct nbd_device *nbd, unsigned long arg) INIT_WORK(&args->work, recv_work); args->index = i; args->nbd = nbd; + args->nsock = nsock; nsock->cookie++; mutex_unlock(&nsock->tx_lock); sockfd_put(old); @@ -1413,6 +1421,7 @@ static int nbd_start_device(struct nbd_device *nbd) refcount_inc(&nbd->config_refs); INIT_WORK(&args->work, recv_work); args->nbd = nbd; + args->nsock = config->socks[i]; args->index = i; queue_work(nbd->recv_workq, &args->work); } -- cgit v1.2.3 From 2e569ada424c40ce27c99bfab4f9780619061c83 Mon Sep 17 00:00:00 2001 From: "Borislav Petkov (AMD)" Date: Wed, 15 Nov 2023 22:02:11 +0100 Subject: x86/microcode: Remove the driver announcement and version First of all, the print is useless. The driver will either load and say which microcode revision the machine has or issue an error. Then, the version number is meaningless and actively confusing, as Yazen mentioned recently: when a subset of patches are backported to a distro kernel, one can't assume the driver version is the same as the upstream one. And besides, the version number of the loader hasn't been used and incremented for a long time. So drop it. Signed-off-by: Borislav Petkov (AMD) Reviewed-by: Thomas Gleixner Link: https://lore.kernel.org/r/20231115210212.9981-2-bp@alien8.de --- arch/x86/kernel/cpu/microcode/core.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/arch/x86/kernel/cpu/microcode/core.c b/arch/x86/kernel/cpu/microcode/core.c index 666d25bbc5ad..b4be3a2c79df 100644 --- a/arch/x86/kernel/cpu/microcode/core.c +++ b/arch/x86/kernel/cpu/microcode/core.c @@ -41,8 +41,6 @@ #include "internal.h" -#define DRIVER_VERSION "2.2" - static struct microcode_ops *microcode_ops; bool dis_ucode_ldr = true; @@ -846,8 +844,6 @@ static int __init microcode_init(void) cpuhp_setup_state(CPUHP_AP_ONLINE_DYN, "x86/microcode:online", mc_cpu_online, mc_cpu_down_prep); - pr_info("Microcode Update Driver: v%s.", DRIVER_VERSION); - return 0; out_pdev: -- cgit v1.2.3 From 080990aa3344123673f686cda2df0d1b0deee046 Mon Sep 17 00:00:00 2001 From: "Borislav Petkov (AMD)" Date: Wed, 15 Nov 2023 22:02:12 +0100 Subject: x86/microcode: Rework early revisions reporting The AMD side of the loader issues the microcode revision for each logical thread on the system, which can become really noisy on huge machines. And doing that doesn't make a whole lot of sense - the microcode revision is already in /proc/cpuinfo. So in case one is interested in the theoretical support of mixed silicon steppings on AMD, one can check there. What is also missing on the AMD side - something which people have requested before - is showing the microcode revision the CPU had *before* the early update. So abstract that up in the main code and have the BSP on each vendor provide those revision numbers. Then, dump them only once on driver init. On Intel, do not dump the patch date - it is not needed. Reported-by: Linus Torvalds Signed-off-by: Borislav Petkov (AMD) Reviewed-by: Thomas Gleixner Link: https://lore.kernel.org/r/CAHk-=wg=%2B8rceshMkB4VnKxmRccVLtBLPBawnewZuuqyx5U=3A@mail.gmail.com --- arch/x86/kernel/cpu/microcode/amd.c | 39 +++++++++----------------------- arch/x86/kernel/cpu/microcode/core.c | 11 +++++++-- arch/x86/kernel/cpu/microcode/intel.c | 17 ++++++-------- arch/x86/kernel/cpu/microcode/internal.h | 14 ++++++++---- 4 files changed, 37 insertions(+), 44 deletions(-) diff --git a/arch/x86/kernel/cpu/microcode/amd.c b/arch/x86/kernel/cpu/microcode/amd.c index 9373ec01c5ae..13b45b9c806d 100644 --- a/arch/x86/kernel/cpu/microcode/amd.c +++ b/arch/x86/kernel/cpu/microcode/amd.c @@ -104,8 +104,6 @@ struct cont_desc { size_t size; }; -static u32 ucode_new_rev; - /* * Microcode patch container file is prepended to the initrd in cpio * format. See Documentation/arch/x86/microcode.rst @@ -442,12 +440,11 @@ static int __apply_microcode_amd(struct microcode_amd *mc) * * Returns true if container found (sets @desc), false otherwise. */ -static bool early_apply_microcode(u32 cpuid_1_eax, void *ucode, size_t size) +static bool early_apply_microcode(u32 cpuid_1_eax, u32 old_rev, void *ucode, size_t size) { struct cont_desc desc = { 0 }; struct microcode_amd *mc; bool ret = false; - u32 rev, dummy; desc.cpuid_1_eax = cpuid_1_eax; @@ -457,22 +454,15 @@ static bool early_apply_microcode(u32 cpuid_1_eax, void *ucode, size_t size) if (!mc) return ret; - native_rdmsr(MSR_AMD64_PATCH_LEVEL, rev, dummy); - /* * Allow application of the same revision to pick up SMT-specific * changes even if the revision of the other SMT thread is already * up-to-date. */ - if (rev > mc->hdr.patch_id) + if (old_rev > mc->hdr.patch_id) return ret; - if (!__apply_microcode_amd(mc)) { - ucode_new_rev = mc->hdr.patch_id; - ret = true; - } - - return ret; + return !__apply_microcode_amd(mc); } static bool get_builtin_microcode(struct cpio_data *cp, unsigned int family) @@ -506,9 +496,12 @@ static void __init find_blobs_in_containers(unsigned int cpuid_1_eax, struct cpi *ret = cp; } -void __init load_ucode_amd_bsp(unsigned int cpuid_1_eax) +void __init load_ucode_amd_bsp(struct early_load_data *ed, unsigned int cpuid_1_eax) { struct cpio_data cp = { }; + u32 dummy; + + native_rdmsr(MSR_AMD64_PATCH_LEVEL, ed->old_rev, dummy); /* Needed in load_microcode_amd() */ ucode_cpu_info[0].cpu_sig.sig = cpuid_1_eax; @@ -517,7 +510,8 @@ void __init load_ucode_amd_bsp(unsigned int cpuid_1_eax) if (!(cp.data && cp.size)) return; - early_apply_microcode(cpuid_1_eax, cp.data, cp.size); + if (early_apply_microcode(cpuid_1_eax, ed->old_rev, cp.data, cp.size)) + native_rdmsr(MSR_AMD64_PATCH_LEVEL, ed->new_rev, dummy); } static enum ucode_state load_microcode_amd(u8 family, const u8 *data, size_t size); @@ -625,10 +619,8 @@ void reload_ucode_amd(unsigned int cpu) rdmsr(MSR_AMD64_PATCH_LEVEL, rev, dummy); if (rev < mc->hdr.patch_id) { - if (!__apply_microcode_amd(mc)) { - ucode_new_rev = mc->hdr.patch_id; - pr_info("reload patch_level=0x%08x\n", ucode_new_rev); - } + if (!__apply_microcode_amd(mc)) + pr_info_once("reload revision: 0x%08x\n", mc->hdr.patch_id); } } @@ -649,8 +641,6 @@ static int collect_cpu_info_amd(int cpu, struct cpu_signature *csig) if (p && (p->patch_id == csig->rev)) uci->mc = p->data; - pr_info("CPU%d: patch_level=0x%08x\n", cpu, csig->rev); - return 0; } @@ -691,8 +681,6 @@ static enum ucode_state apply_microcode_amd(int cpu) rev = mc_amd->hdr.patch_id; ret = UCODE_UPDATED; - pr_info("CPU%d: new patch_level=0x%08x\n", cpu, rev); - out: uci->cpu_sig.rev = rev; c->microcode = rev; @@ -935,11 +923,6 @@ struct microcode_ops * __init init_amd_microcode(void) pr_warn("AMD CPU family 0x%x not supported\n", c->x86); return NULL; } - - if (ucode_new_rev) - pr_info_once("microcode updated early to new patch_level=0x%08x\n", - ucode_new_rev); - return µcode_amd_ops; } diff --git a/arch/x86/kernel/cpu/microcode/core.c b/arch/x86/kernel/cpu/microcode/core.c index b4be3a2c79df..232026a239a6 100644 --- a/arch/x86/kernel/cpu/microcode/core.c +++ b/arch/x86/kernel/cpu/microcode/core.c @@ -75,6 +75,8 @@ static u32 final_levels[] = { 0, /* T-101 terminator */ }; +struct early_load_data early_data; + /* * Check the current patch level on this CPU. * @@ -153,9 +155,9 @@ void __init load_ucode_bsp(void) return; if (intel) - load_ucode_intel_bsp(); + load_ucode_intel_bsp(&early_data); else - load_ucode_amd_bsp(cpuid_1_eax); + load_ucode_amd_bsp(&early_data, cpuid_1_eax); } void load_ucode_ap(void) @@ -826,6 +828,11 @@ static int __init microcode_init(void) if (!microcode_ops) return -ENODEV; + pr_info_once("Current revision: 0x%08x\n", (early_data.new_rev ?: early_data.old_rev)); + + if (early_data.new_rev) + pr_info_once("Updated early from: 0x%08x\n", early_data.old_rev); + microcode_pdev = platform_device_register_simple("microcode", -1, NULL, 0); if (IS_ERR(microcode_pdev)) return PTR_ERR(microcode_pdev); diff --git a/arch/x86/kernel/cpu/microcode/intel.c b/arch/x86/kernel/cpu/microcode/intel.c index 6024feb98d29..070426b9895f 100644 --- a/arch/x86/kernel/cpu/microcode/intel.c +++ b/arch/x86/kernel/cpu/microcode/intel.c @@ -339,16 +339,9 @@ static enum ucode_state __apply_microcode(struct ucode_cpu_info *uci, static enum ucode_state apply_microcode_early(struct ucode_cpu_info *uci) { struct microcode_intel *mc = uci->mc; - enum ucode_state ret; - u32 cur_rev, date; + u32 cur_rev; - ret = __apply_microcode(uci, mc, &cur_rev); - if (ret == UCODE_UPDATED) { - date = mc->hdr.date; - pr_info_once("updated early: 0x%x -> 0x%x, date = %04x-%02x-%02x\n", - cur_rev, mc->hdr.rev, date & 0xffff, date >> 24, (date >> 16) & 0xff); - } - return ret; + return __apply_microcode(uci, mc, &cur_rev); } static __init bool load_builtin_intel_microcode(struct cpio_data *cp) @@ -413,13 +406,17 @@ static int __init save_builtin_microcode(void) early_initcall(save_builtin_microcode); /* Load microcode on BSP from initrd or builtin blobs */ -void __init load_ucode_intel_bsp(void) +void __init load_ucode_intel_bsp(struct early_load_data *ed) { struct ucode_cpu_info uci; + ed->old_rev = intel_get_microcode_revision(); + uci.mc = get_microcode_blob(&uci, false); if (uci.mc && apply_microcode_early(&uci) == UCODE_UPDATED) ucode_patch_va = UCODE_BSP_LOADED; + + ed->new_rev = uci.cpu_sig.rev; } void load_ucode_intel_ap(void) diff --git a/arch/x86/kernel/cpu/microcode/internal.h b/arch/x86/kernel/cpu/microcode/internal.h index f8047b12329a..21776c529fa9 100644 --- a/arch/x86/kernel/cpu/microcode/internal.h +++ b/arch/x86/kernel/cpu/microcode/internal.h @@ -37,6 +37,12 @@ struct microcode_ops { use_nmi : 1; }; +struct early_load_data { + u32 old_rev; + u32 new_rev; +}; + +extern struct early_load_data early_data; extern struct ucode_cpu_info ucode_cpu_info[]; struct cpio_data find_microcode_in_initrd(const char *path); @@ -92,14 +98,14 @@ extern bool dis_ucode_ldr; extern bool force_minrev; #ifdef CONFIG_CPU_SUP_AMD -void load_ucode_amd_bsp(unsigned int family); +void load_ucode_amd_bsp(struct early_load_data *ed, unsigned int family); void load_ucode_amd_ap(unsigned int family); int save_microcode_in_initrd_amd(unsigned int family); void reload_ucode_amd(unsigned int cpu); struct microcode_ops *init_amd_microcode(void); void exit_amd_microcode(void); #else /* CONFIG_CPU_SUP_AMD */ -static inline void load_ucode_amd_bsp(unsigned int family) { } +static inline void load_ucode_amd_bsp(struct early_load_data *ed, unsigned int family) { } static inline void load_ucode_amd_ap(unsigned int family) { } static inline int save_microcode_in_initrd_amd(unsigned int family) { return -EINVAL; } static inline void reload_ucode_amd(unsigned int cpu) { } @@ -108,12 +114,12 @@ static inline void exit_amd_microcode(void) { } #endif /* !CONFIG_CPU_SUP_AMD */ #ifdef CONFIG_CPU_SUP_INTEL -void load_ucode_intel_bsp(void); +void load_ucode_intel_bsp(struct early_load_data *ed); void load_ucode_intel_ap(void); void reload_ucode_intel(void); struct microcode_ops *init_intel_microcode(void); #else /* CONFIG_CPU_SUP_INTEL */ -static inline void load_ucode_intel_bsp(void) { } +static inline void load_ucode_intel_bsp(struct early_load_data *ed) { } static inline void load_ucode_intel_ap(void) { } static inline void reload_ucode_intel(void) { } static inline struct microcode_ops *init_intel_microcode(void) { return NULL; } -- cgit v1.2.3 From a6dda77a752d918b35ef4a3f94e6b8c7d7ba4a73 Mon Sep 17 00:00:00 2001 From: Yang Jihong Date: Sat, 18 Nov 2023 02:48:56 +0000 Subject: perf kwork: Fix a build error on 32-bit lkft reported a build error for 32-bit system: builtin-kwork.c: In function 'top_print_work': builtin-kwork.c:1646:28: error: format '%ld' expects argument of type 'long int', but argument 3 has type 'u64' {aka 'long long unsigned int'} [-Werror=format=] 1646 | ret += printf(" %*ld ", PRINT_PID_WIDTH, work->id); | ~~~^ ~~~~~~~~ | | | | long int u64 {aka long long unsigned int} | %*lld cc1: all warnings being treated as errors make[3]: *** [/builds/linux/tools/build/Makefile.build:106: /home/tuxbuild/.cache/tuxmake/builds/1/build/builtin-kwork.o] Error 1 Fix it. Fixes: 55c40e505234 ("perf kwork top: Introduce new top utility") Reported-by: Linux Kernel Functional Testing Signed-off-by: Yang Jihong Acked-by: Namhyung Kim Cc: avagin@google.com Cc: daniel.diaz@linaro.org Link: https://lore.kernel.org/r/20231118024858.1567039-2-yangjihong1@huawei.com Signed-off-by: Namhyung Kim --- tools/perf/builtin-kwork.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/perf/builtin-kwork.c b/tools/perf/builtin-kwork.c index f007a9b27065..0092b9b39611 100644 --- a/tools/perf/builtin-kwork.c +++ b/tools/perf/builtin-kwork.c @@ -1643,7 +1643,7 @@ static int top_print_work(struct perf_kwork *kwork __maybe_unused, struct kwork_ /* * pid */ - ret += printf(" %*ld ", PRINT_PID_WIDTH, work->id); + ret += printf(" %*" PRIu64 " ", PRINT_PID_WIDTH, work->id); /* * tgid -- cgit v1.2.3 From 29b8e94dcf2575c17541f843741ee96691ff1ded Mon Sep 17 00:00:00 2001 From: Yang Jihong Date: Sat, 18 Nov 2023 02:48:57 +0000 Subject: perf lock contention: Fix a build error on 32-bit Fix a build error on 32-bit system: util/bpf_lock_contention.c: In function 'lock_contention_get_name': util/bpf_lock_contention.c:253:50: error: format '%lu' expects argument of type 'long unsigned int', but argument 4 has type 'u64 {aka long long unsigned int}' [-Werror=format=] snprintf(name_buf, sizeof(name_buf), "cgroup:%lu", cgrp_id); ~~^ %llu cc1: all warnings being treated as errors Fixes: d0c502e46e97 ("perf lock contention: Prepare to handle cgroups") Signed-off-by: Yang Jihong Acked-by: Namhyung Kim Cc: avagin@google.com Cc: daniel.diaz@linaro.org Link: https://lore.kernel.org/r/20231118024858.1567039-3-yangjihong1@huawei.com Signed-off-by: Namhyung Kim --- tools/perf/util/bpf_lock_contention.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/tools/perf/util/bpf_lock_contention.c b/tools/perf/util/bpf_lock_contention.c index e105245eb905..f1716c089c99 100644 --- a/tools/perf/util/bpf_lock_contention.c +++ b/tools/perf/util/bpf_lock_contention.c @@ -12,6 +12,7 @@ #include #include #include +#include #include "bpf_skel/lock_contention.skel.h" #include "bpf_skel/lock_data.h" @@ -250,7 +251,7 @@ static const char *lock_contention_get_name(struct lock_contention *con, if (cgrp) return cgrp->name; - snprintf(name_buf, sizeof(name_buf), "cgroup:%lu", cgrp_id); + snprintf(name_buf, sizeof(name_buf), "cgroup:%" PRIu64 "", cgrp_id); return name_buf; } -- cgit v1.2.3 From cea7008190ad65b4aaae6e94667a358d2c10a696 Mon Sep 17 00:00:00 2001 From: Cong Yang Date: Mon, 20 Nov 2023 10:01:09 +0800 Subject: drm/panel: boe-tv101wum-nl6: Fine tune Himax83102-j02 panel HFP and HBP The refresh reported by modetest is 60.46Hz, and the actual measurement is 60.01Hz, which is outside the expected tolerance. Adjust hporch and pixel clock to fix it. After repair, modetest and actual measurement were all 60.01Hz. Modetest refresh = Pixel CLK/ htotal* vtotal, but measurement frame rate is HS->LP cycle time(Vblanking). Measured frame rate is not only affecte by Htotal/Vtotal/pixel clock, also affected by Lane-num/PixelBit/LineTime /DSI CLK. Assume that the DSI controller could not make the mode that we requested(presumably it's PLL couldn't generate the exact pixel clock?). If you use a different DSI controller, you may need to readjust these parameters. Now this panel looks like it's only used by me on the MTK platform, so let's change this set of parameters. Fixes: 1bc2ef065f13 ("drm/panel: Support for Starry-himax83102-j02 TDDI MIPI-DSI panel") Signed-off-by: Cong Yang Reviewed-by: Douglas Anderson Signed-off-by: Douglas Anderson Link: https://patchwork.freedesktop.org/patch/msgid/20231120020109.3216343-1-yangcong5@huaqin.corp-partner.google.com --- drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c b/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c index a287be1aaf70..be8f48e3c1db 100644 --- a/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c +++ b/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c @@ -1767,11 +1767,11 @@ static const struct panel_desc starry_qfh032011_53g_desc = { }; static const struct drm_display_mode starry_himax83102_j02_default_mode = { - .clock = 161600, + .clock = 162850, .hdisplay = 1200, - .hsync_start = 1200 + 40, - .hsync_end = 1200 + 40 + 20, - .htotal = 1200 + 40 + 20 + 40, + .hsync_start = 1200 + 50, + .hsync_end = 1200 + 50 + 20, + .htotal = 1200 + 50 + 20 + 50, .vdisplay = 1920, .vsync_start = 1920 + 116, .vsync_end = 1920 + 116 + 8, -- cgit v1.2.3 From ab93edb2f94c3c0d5965be3815782472adbe3f52 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Wed, 22 Nov 2023 06:11:09 +1000 Subject: nouveau/gsp: allocate enough space for all channel ids. This probably isn't the ideal fix, but we ended up using chids sparsely, and lots of things rely on indexing into the full range, so just allocate the full range up front. The GSP code fixes 8 channels into a userd page, but we end up using a single userd page per channel so end up sparsely using the range. Fixes a few crashes seen with multiple channels. Link: https://gitlab.freedesktop.org/drm/nouveau/-/issues/277 Signed-off-by: Dave Airlie Signed-off-by: Danilo Krummrich Link: https://patchwork.freedesktop.org/patch/msgid/20231121201109.2988516-1-airlied@gmail.com --- drivers/gpu/drm/nouveau/nvkm/engine/fifo/r535.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/nouveau/nvkm/engine/fifo/r535.c b/drivers/gpu/drm/nouveau/nvkm/engine/fifo/r535.c index 3adbb05ff587..d088e636edc3 100644 --- a/drivers/gpu/drm/nouveau/nvkm/engine/fifo/r535.c +++ b/drivers/gpu/drm/nouveau/nvkm/engine/fifo/r535.c @@ -539,7 +539,7 @@ r535_fifo_runl_ctor(struct nvkm_fifo *fifo) struct nvkm_runl *runl; struct nvkm_engn *engn; u32 cgids = 2048; - u32 chids = 2048 / CHID_PER_USERD; + u32 chids = 2048; int ret; NV2080_CTRL_FIFO_GET_DEVICE_INFO_TABLE_PARAMS *ctrl; -- cgit v1.2.3 From 0739af07d1d947af27c877f797cb82ceee702515 Mon Sep 17 00:00:00 2001 From: Jose Ignacio Tornos Martinez Date: Mon, 20 Nov 2023 13:06:29 +0100 Subject: net: usb: ax88179_178a: fix failed operations during ax88179_reset Using generic ASIX Electronics Corp. AX88179 Gigabit Ethernet device, the following test cycle has been implemented: - power on - check logs - shutdown - after detecting the system shutdown, disconnect power - after approximately 60 seconds of sleep, power is restored Running some cycles, sometimes error logs like this appear: kernel: ax88179_178a 2-9:1.0 (unnamed net_device) (uninitialized): Failed to write reg index 0x0001: -19 kernel: ax88179_178a 2-9:1.0 (unnamed net_device) (uninitialized): Failed to read reg index 0x0001: -19 ... These failed operation are happening during ax88179_reset execution, so the initialization could not be correct. In order to avoid this, we need to increase the delay after reset and clock initial operations. By using these larger values, many cycles have been run and no failed operations appear. It would be better to check some status register to verify when the operation has finished, but I do not have found any available information (neither in the public datasheets nor in the manufacturer's driver). The only available information for the necessary delays is the maufacturer's driver (original values) but the proposed values are not enough for the tested devices. Fixes: e2ca90c276e1f ("ax88179_178a: ASIX AX88179_178A USB 3.0/2.0 to gigabit ethernet adapter driver") Reported-by: Herb Wei Tested-by: Herb Wei Signed-off-by: Jose Ignacio Tornos Martinez Link: https://lore.kernel.org/r/20231120120642.54334-1-jtornosm@redhat.com Signed-off-by: Jakub Kicinski --- drivers/net/usb/ax88179_178a.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/usb/ax88179_178a.c b/drivers/net/usb/ax88179_178a.c index aff39bf3161d..4ea0e155bb0d 100644 --- a/drivers/net/usb/ax88179_178a.c +++ b/drivers/net/usb/ax88179_178a.c @@ -1583,11 +1583,11 @@ static int ax88179_reset(struct usbnet *dev) *tmp16 = AX_PHYPWR_RSTCTL_IPRL; ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_PHYPWR_RSTCTL, 2, 2, tmp16); - msleep(200); + msleep(500); *tmp = AX_CLK_SELECT_ACS | AX_CLK_SELECT_BCS; ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_CLK_SELECT, 1, 1, tmp); - msleep(100); + msleep(200); /* Ethernet PHY Auto Detach*/ ax88179_auto_detach(dev); -- cgit v1.2.3 From 495ec91b48e489afefb2ad714f0d9b68c3016c6c Mon Sep 17 00:00:00 2001 From: Jakub Kicinski Date: Mon, 20 Nov 2023 12:01:09 -0800 Subject: docs: netdev: try to guide people on dealing with silence There has been more than a few threads which went idle before the merge window and now people came back to them and started asking about next steps. We currently tell people to be patient and not to repost too often. Our "not too often", however, is still a few orders of magnitude faster than other subsystems. Or so I feel after hearing people talk about review rates at LPC. Clarify in the doc that if the discussion went idle for a week on netdev, 95% of the time there's no point waiting longer. Link: https://lore.kernel.org/r/20231120200109.620392-1-kuba@kernel.org Signed-off-by: Jakub Kicinski --- Documentation/process/maintainer-netdev.rst | 20 +++++++++++++++++--- 1 file changed, 17 insertions(+), 3 deletions(-) diff --git a/Documentation/process/maintainer-netdev.rst b/Documentation/process/maintainer-netdev.rst index 7feacc20835e..84ee60fceef2 100644 --- a/Documentation/process/maintainer-netdev.rst +++ b/Documentation/process/maintainer-netdev.rst @@ -193,9 +193,23 @@ Review timelines Generally speaking, the patches get triaged quickly (in less than 48h). But be patient, if your patch is active in patchwork (i.e. it's listed on the project's patch list) the chances it was missed are close to zero. -Asking the maintainer for status updates on your -patch is a good way to ensure your patch is ignored or pushed to the -bottom of the priority list. + +The high volume of development on netdev makes reviewers move on +from discussions relatively quickly. New comments and replies +are very unlikely to arrive after a week of silence. If a patch +is no longer active in patchwork and the thread went idle for more +than a week - clarify the next steps and/or post the next version. + +For RFC postings specifically, if nobody responded in a week - reviewers +either missed the posting or have no strong opinions. If the code is ready, +repost as a PATCH. + +Emails saying just "ping" or "bump" are considered rude. If you can't figure +out the status of the patch from patchwork or where the discussion has +landed - describe your best guess and ask if it's correct. For example:: + + I don't understand what the next steps are. Person X seems to be unhappy + with A, should I do B and repost the patches? .. _Changes requested: -- cgit v1.2.3 From b6fe6f03716da246b453369f98a553d4ab21447c Mon Sep 17 00:00:00 2001 From: Hao Ge Date: Tue, 21 Nov 2023 09:37:09 +0800 Subject: dpll: Fix potential msg memleak when genlmsg_put_reply failed We should clean the skb resource if genlmsg_put_reply failed. Fixes: 9d71b54b65b1 ("dpll: netlink: Add DPLL framework base functions") Signed-off-by: Hao Ge Reviewed-by: Vadim Fedorenko Link: https://lore.kernel.org/r/20231121013709.73323-1-gehao@kylinos.cn Signed-off-by: Jakub Kicinski --- drivers/dpll/dpll_netlink.c | 17 ++++++++++++----- 1 file changed, 12 insertions(+), 5 deletions(-) diff --git a/drivers/dpll/dpll_netlink.c b/drivers/dpll/dpll_netlink.c index a6dc3997bf5c..442a0ebeb953 100644 --- a/drivers/dpll/dpll_netlink.c +++ b/drivers/dpll/dpll_netlink.c @@ -1093,9 +1093,10 @@ int dpll_nl_pin_id_get_doit(struct sk_buff *skb, struct genl_info *info) return -ENOMEM; hdr = genlmsg_put_reply(msg, info, &dpll_nl_family, 0, DPLL_CMD_PIN_ID_GET); - if (!hdr) + if (!hdr) { + nlmsg_free(msg); return -EMSGSIZE; - + } pin = dpll_pin_find_from_nlattr(info); if (!IS_ERR(pin)) { ret = dpll_msg_add_pin_handle(msg, pin); @@ -1123,8 +1124,10 @@ int dpll_nl_pin_get_doit(struct sk_buff *skb, struct genl_info *info) return -ENOMEM; hdr = genlmsg_put_reply(msg, info, &dpll_nl_family, 0, DPLL_CMD_PIN_GET); - if (!hdr) + if (!hdr) { + nlmsg_free(msg); return -EMSGSIZE; + } ret = dpll_cmd_pin_get_one(msg, pin, info->extack); if (ret) { nlmsg_free(msg); @@ -1256,8 +1259,10 @@ int dpll_nl_device_id_get_doit(struct sk_buff *skb, struct genl_info *info) return -ENOMEM; hdr = genlmsg_put_reply(msg, info, &dpll_nl_family, 0, DPLL_CMD_DEVICE_ID_GET); - if (!hdr) + if (!hdr) { + nlmsg_free(msg); return -EMSGSIZE; + } dpll = dpll_device_find_from_nlattr(info); if (!IS_ERR(dpll)) { @@ -1284,8 +1289,10 @@ int dpll_nl_device_get_doit(struct sk_buff *skb, struct genl_info *info) return -ENOMEM; hdr = genlmsg_put_reply(msg, info, &dpll_nl_family, 0, DPLL_CMD_DEVICE_GET); - if (!hdr) + if (!hdr) { + nlmsg_free(msg); return -EMSGSIZE; + } ret = dpll_device_get_one(dpll, msg, info->extack); if (ret) { -- cgit v1.2.3 From 18286883e779fb79b413a7462968ee3f6768f19c Mon Sep 17 00:00:00 2001 From: Uros Bizjak Date: Tue, 14 Nov 2023 17:59:28 +0100 Subject: x86/hyperv: Use atomic_try_cmpxchg() to micro-optimize hv_nmi_unknown() Use atomic_try_cmpxchg() instead of atomic_cmpxchg(*ptr, old, new) == old in hv_nmi_unknown(). On x86 the CMPXCHG instruction returns success in the ZF flag, so this change saves a compare after CMPXCHG. The generated asm code improves from: 3e: 65 8b 15 00 00 00 00 mov %gs:0x0(%rip),%edx 45: b8 ff ff ff ff mov $0xffffffff,%eax 4a: f0 0f b1 15 00 00 00 lock cmpxchg %edx,0x0(%rip) 51: 00 52: 83 f8 ff cmp $0xffffffff,%eax 55: 0f 95 c0 setne %al to: 3e: 65 8b 15 00 00 00 00 mov %gs:0x0(%rip),%edx 45: b8 ff ff ff ff mov $0xffffffff,%eax 4a: f0 0f b1 15 00 00 00 lock cmpxchg %edx,0x0(%rip) 51: 00 52: 0f 95 c0 setne %al No functional change intended. Cc: "K. Y. Srinivasan" Cc: Haiyang Zhang Cc: Wei Liu Cc: Dexuan Cui Cc: Thomas Gleixner Cc: Ingo Molnar Cc: Borislav Petkov Cc: Dave Hansen Cc: "H. Peter Anvin" Signed-off-by: Uros Bizjak Reviewed-by: Michael Kelley Link: https://lore.kernel.org/r/20231114170038.381634-1-ubizjak@gmail.com Signed-off-by: Wei Liu Message-ID: <20231114170038.381634-1-ubizjak@gmail.com> --- arch/x86/kernel/cpu/mshyperv.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/arch/x86/kernel/cpu/mshyperv.c b/arch/x86/kernel/cpu/mshyperv.c index e6bba12c759c..01fa06dd06b6 100644 --- a/arch/x86/kernel/cpu/mshyperv.c +++ b/arch/x86/kernel/cpu/mshyperv.c @@ -262,11 +262,14 @@ static uint32_t __init ms_hyperv_platform(void) static int hv_nmi_unknown(unsigned int val, struct pt_regs *regs) { static atomic_t nmi_cpu = ATOMIC_INIT(-1); + unsigned int old_cpu, this_cpu; if (!unknown_nmi_panic) return NMI_DONE; - if (atomic_cmpxchg(&nmi_cpu, -1, raw_smp_processor_id()) != -1) + old_cpu = -1; + this_cpu = raw_smp_processor_id(); + if (!atomic_try_cmpxchg(&nmi_cpu, &old_cpu, this_cpu)) return NMI_HANDLED; return NMI_DONE; -- cgit v1.2.3 From e389fe8b68137344562fb6e4d53d8a89ef6212dd Mon Sep 17 00:00:00 2001 From: Victor Fragoso Date: Tue, 21 Nov 2023 21:05:56 +0000 Subject: USB: serial: option: add Fibocom L7xx modules Add support for Fibocom L716-EU module series. L716-EU is a Fibocom module based on ZTE's V3E/V3T chipset. Device creates multiple interfaces when connected to PC as follows: - Network Interface: ECM or RNDIS (set by FW or AT Command) - ttyUSB0: AT port - ttyUSB1: Modem port - ttyUSB2: AT2 port - ttyUSB3: Trace port for log information - ADB: ADB port for debugging. ("Driver=usbfs" when ADB server enabled) Here are the outputs of lsusb and usb-devices: $ ls /dev/ttyUSB* /dev/ttyUSB0 /dev/ttyUSB1 /dev/ttyUSB2 /dev/ttyUSB3 usb-devices: L716-EU (ECM mode): T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 51 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=2cb7 ProdID=0001 Rev= 1.00 S: Manufacturer=Fibocom,Incorporated S: Product=Fibocom Mobile Boardband S: SerialNumber=1234567890ABCDEF C:* #Ifs= 7 Cfg#= 1 Atr=e0 MxPwr=500mA A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=06 Prot=00 I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=06 Prot=00 Driver=cdc_ether E: Ad=87(I) Atr=03(Int.) MxPS= 16 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=usbfs E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms L716-EU (RNDIS mode): T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 49 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=2cb7 ProdID=0001 Rev= 1.00 S: Manufacturer=Fibocom,Incorporated S: Product=Fibocom Mobile Boardband S: SerialNumber=1234567890ABCDEF C:* #Ifs= 7 Cfg#= 1 Atr=e0 MxPwr=500mA A: FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=03 I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=02 Prot=ff Driver=rndis_host E: Ad=87(I) Atr=03(Int.) MxPS= 8 Ivl=32ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=usbfs E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Victor Fragoso Reviewed-by: Lars Melin Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold --- drivers/usb/serial/option.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 9c76095ebfe1..06b9b04c022a 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -2250,6 +2250,7 @@ static const struct usb_device_id option_ids[] = { .driver_info = RSVD(4) | RSVD(5) | RSVD(6) }, { USB_DEVICE(0x1782, 0x4d10) }, /* Fibocom L610 (AT mode) */ { USB_DEVICE_INTERFACE_CLASS(0x1782, 0x4d11, 0xff) }, /* Fibocom L610 (ECM/RNDIS mode) */ + { USB_DEVICE_AND_INTERFACE_INFO(0x2cb7, 0x0001, 0xff, 0xff, 0xff) }, /* Fibocom L716-EU (ECM/RNDIS mode) */ { USB_DEVICE(0x2cb7, 0x0104), /* Fibocom NL678 series */ .driver_info = RSVD(4) | RSVD(5) }, { USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x0105, 0xff), /* Fibocom NL678 series */ -- cgit v1.2.3 From 8abc712ea4867a81c860853048f24e511bbc20f2 Mon Sep 17 00:00:00 2001 From: "Ritesh Harjani (IBM)" Date: Wed, 22 Nov 2023 14:32:15 +0530 Subject: ext2: Fix ki_pos update for DIO buffered-io fallback case Commit "filemap: update ki_pos in generic_perform_write", made updating of ki_pos into common code in generic_perform_write() function. This also causes generic/091 to fail. This happened due to an in-flight collision with: fb5de4358e1a ("ext2: Move direct-io to use iomap"). I have chosen fixes tag based on which commit got landed later to upstream kernel. Fixes: 182c25e9c157 ("filemap: update ki_pos in generic_perform_write") Cc: stable@vger.kernel.org Reviewed-by: Christoph Hellwig Signed-off-by: Ritesh Harjani (IBM) Signed-off-by: Jan Kara Message-Id: --- fs/ext2/file.c | 1 - 1 file changed, 1 deletion(-) diff --git a/fs/ext2/file.c b/fs/ext2/file.c index 1039e5bf90af..4ddc36f4dbd4 100644 --- a/fs/ext2/file.c +++ b/fs/ext2/file.c @@ -258,7 +258,6 @@ static ssize_t ext2_dio_write_iter(struct kiocb *iocb, struct iov_iter *from) goto out_unlock; } - iocb->ki_pos += status; ret += status; endbyte = pos + status - 1; ret2 = filemap_write_and_wait_range(inode->i_mapping, pos, -- cgit v1.2.3 From 06ae5afce8cc1f7621cc5c7751e449ce20d68af7 Mon Sep 17 00:00:00 2001 From: Denis Benato Date: Fri, 17 Nov 2023 14:15:55 +1300 Subject: HID: hid-asus: add const to read-only outgoing usb buffer In the function asus_kbd_set_report the parameter buf is read-only as it gets copied in a memory portion suitable for USB transfer, but the parameter is not marked as const: add the missing const and mark const immutable buffers passed to that function. Signed-off-by: Denis Benato Signed-off-by: Luke D. Jones Signed-off-by: Jiri Kosina --- drivers/hid/hid-asus.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/hid/hid-asus.c b/drivers/hid/hid-asus.c index fd61dba88233..b70673a929a1 100644 --- a/drivers/hid/hid-asus.c +++ b/drivers/hid/hid-asus.c @@ -381,7 +381,7 @@ static int asus_raw_event(struct hid_device *hdev, return 0; } -static int asus_kbd_set_report(struct hid_device *hdev, u8 *buf, size_t buf_size) +static int asus_kbd_set_report(struct hid_device *hdev, const u8 *buf, size_t buf_size) { unsigned char *dmabuf; int ret; @@ -404,7 +404,7 @@ static int asus_kbd_set_report(struct hid_device *hdev, u8 *buf, size_t buf_size static int asus_kbd_init(struct hid_device *hdev) { - u8 buf[] = { FEATURE_KBD_REPORT_ID, 0x41, 0x53, 0x55, 0x53, 0x20, 0x54, + const u8 buf[] = { FEATURE_KBD_REPORT_ID, 0x41, 0x53, 0x55, 0x53, 0x20, 0x54, 0x65, 0x63, 0x68, 0x2e, 0x49, 0x6e, 0x63, 0x2e, 0x00 }; int ret; @@ -418,7 +418,7 @@ static int asus_kbd_init(struct hid_device *hdev) static int asus_kbd_get_functions(struct hid_device *hdev, unsigned char *kbd_func) { - u8 buf[] = { FEATURE_KBD_REPORT_ID, 0x05, 0x20, 0x31, 0x00, 0x08 }; + const u8 buf[] = { FEATURE_KBD_REPORT_ID, 0x05, 0x20, 0x31, 0x00, 0x08 }; u8 *readbuf; int ret; @@ -449,7 +449,7 @@ static int asus_kbd_get_functions(struct hid_device *hdev, static int rog_nkey_led_init(struct hid_device *hdev) { - u8 buf_init_start[] = { FEATURE_KBD_LED_REPORT_ID1, 0xB9 }; + const u8 buf_init_start[] = { FEATURE_KBD_LED_REPORT_ID1, 0xB9 }; u8 buf_init2[] = { FEATURE_KBD_LED_REPORT_ID1, 0x41, 0x53, 0x55, 0x53, 0x20, 0x54, 0x65, 0x63, 0x68, 0x2e, 0x49, 0x6e, 0x63, 0x2e, 0x00 }; u8 buf_init3[] = { FEATURE_KBD_LED_REPORT_ID1, -- cgit v1.2.3 From 546edbd26cff7ae990e480a59150e801a06f77b1 Mon Sep 17 00:00:00 2001 From: Denis Benato Date: Fri, 17 Nov 2023 14:15:56 +1300 Subject: HID: hid-asus: reset the backlight brightness level on resume Some devices managed by this driver automatically set brightness to 0 before entering a suspended state and reset it back to a default brightness level after the resume: this has the effect of having the kernel report wrong brightness status after a sleep, and on some devices (like the Asus RC71L) that brightness is the intensity of LEDs directly facing the user. Fix the above issue by setting back brightness to the level it had before entering a sleep state. Signed-off-by: Denis Benato Signed-off-by: Luke D. Jones Signed-off-by: Jiri Kosina --- drivers/hid/hid-asus.c | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) diff --git a/drivers/hid/hid-asus.c b/drivers/hid/hid-asus.c index b70673a929a1..78cdfb8b9a7a 100644 --- a/drivers/hid/hid-asus.c +++ b/drivers/hid/hid-asus.c @@ -1000,6 +1000,24 @@ static int asus_start_multitouch(struct hid_device *hdev) return 0; } +static int __maybe_unused asus_resume(struct hid_device *hdev) { + struct asus_drvdata *drvdata = hid_get_drvdata(hdev); + int ret = 0; + + if (drvdata->kbd_backlight) { + const u8 buf[] = { FEATURE_KBD_REPORT_ID, 0xba, 0xc5, 0xc4, + drvdata->kbd_backlight->cdev.brightness }; + ret = asus_kbd_set_report(hdev, buf, sizeof(buf)); + if (ret < 0) { + hid_err(hdev, "Asus failed to set keyboard backlight: %d\n", ret); + goto asus_resume_err; + } + } + +asus_resume_err: + return ret; +} + static int __maybe_unused asus_reset_resume(struct hid_device *hdev) { struct asus_drvdata *drvdata = hid_get_drvdata(hdev); @@ -1294,6 +1312,7 @@ static struct hid_driver asus_driver = { .input_configured = asus_input_configured, #ifdef CONFIG_PM .reset_resume = asus_reset_resume, + .resume = asus_resume, #endif .event = asus_event, .raw_event = asus_raw_event -- cgit v1.2.3 From 9ffccb691adb854e7b7f3ee57fbbda12ff70533f Mon Sep 17 00:00:00 2001 From: Aoba K Date: Tue, 21 Nov 2023 20:23:11 +0800 Subject: HID: multitouch: Add quirk for HONOR GLO-GXXX touchpad Honor MagicBook 13 2023 has a touchpad which do not switch to the multitouch mode until the input mode feature is written by the host. The touchpad do report the input mode at touchpad(3), while itself working under mouse mode. As a workaround, it is possible to call MT_QUIRE_FORCE_GET_FEATURE to force set feature in mt_set_input_mode for such device. The touchpad reports as BLTP7853, which cannot retrive any useful manufacture information on the internel by this string at present. As the serial number of the laptop is GLO-G52, while DMI info reports the laptop serial number as GLO-GXXX, this workaround should applied to all models which has the GLO-GXXX. Signed-off-by: Aoba K Signed-off-by: Jiri Kosina --- drivers/hid/hid-multitouch.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/hid/hid-multitouch.c b/drivers/hid/hid-multitouch.c index e098cc7b3944..fd5b0637dad6 100644 --- a/drivers/hid/hid-multitouch.c +++ b/drivers/hid/hid-multitouch.c @@ -2046,6 +2046,11 @@ static const struct hid_device_id mt_devices[] = { MT_USB_DEVICE(USB_VENDOR_ID_HANVON_ALT, USB_DEVICE_ID_HANVON_ALT_MULTITOUCH) }, + /* HONOR GLO-GXXX panel */ + { .driver_data = MT_CLS_VTL, + HID_DEVICE(BUS_I2C, HID_GROUP_MULTITOUCH_WIN_8, + 0x347d, 0x7853) }, + /* Ilitek dual touch panel */ { .driver_data = MT_CLS_NSMU, MT_USB_DEVICE(USB_VENDOR_ID_ILITEK, -- cgit v1.2.3 From 84d2db91f14a32dc856a5972e3f0907089093c7a Mon Sep 17 00:00:00 2001 From: Nguyen Dinh Phi Date: Tue, 21 Nov 2023 15:53:57 +0800 Subject: nfc: virtual_ncidev: Add variable to check if ndev is running syzbot reported an memory leak that happens when an skb is add to send_buff after virtual nci closed. This patch adds a variable to track if the ndev is running before handling new skb in send function. Signed-off-by: Nguyen Dinh Phi Reported-by: syzbot+6eb09d75211863f15e3e@syzkaller.appspotmail.com Closes: https://lore.kernel.org/lkml/00000000000075472b06007df4fb@google.com Reviewed-by: Bongsu Jeon Reviewed-by: Krzysztof Kozlowski Signed-off-by: David S. Miller --- drivers/nfc/virtual_ncidev.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/nfc/virtual_ncidev.c b/drivers/nfc/virtual_ncidev.c index b027be0b0b6f..590b038e449e 100644 --- a/drivers/nfc/virtual_ncidev.c +++ b/drivers/nfc/virtual_ncidev.c @@ -26,10 +26,14 @@ struct virtual_nci_dev { struct mutex mtx; struct sk_buff *send_buff; struct wait_queue_head wq; + bool running; }; static int virtual_nci_open(struct nci_dev *ndev) { + struct virtual_nci_dev *vdev = nci_get_drvdata(ndev); + + vdev->running = true; return 0; } @@ -40,6 +44,7 @@ static int virtual_nci_close(struct nci_dev *ndev) mutex_lock(&vdev->mtx); kfree_skb(vdev->send_buff); vdev->send_buff = NULL; + vdev->running = false; mutex_unlock(&vdev->mtx); return 0; @@ -50,7 +55,7 @@ static int virtual_nci_send(struct nci_dev *ndev, struct sk_buff *skb) struct virtual_nci_dev *vdev = nci_get_drvdata(ndev); mutex_lock(&vdev->mtx); - if (vdev->send_buff) { + if (vdev->send_buff || !vdev->running) { mutex_unlock(&vdev->mtx); kfree_skb(skb); return -1; -- cgit v1.2.3 From 3ee7ecd712048ade6482bea4b2f3dcaf039c0348 Mon Sep 17 00:00:00 2001 From: Jack Wang Date: Mon, 20 Nov 2023 16:41:38 +0100 Subject: RDMA/rtrs-srv: Do not unconditionally enable irq When IO is completed, rtrs can be called in softirq context, unconditionally enabling irq could cause panic. To be on safe side, use spin_lock_irqsave and spin_unlock_irqrestore instread. Fixes: 9cb837480424 ("RDMA/rtrs: server: main functionality") Signed-off-by: Jack Wang Signed-off-by: Florian-Ewald Mueller Signed-off-by: Md Haris Iqbal Signed-off-by: Grzegorz Prajsner Link: https://lore.kernel.org/r/20231120154146.920486-2-haris.iqbal@ionos.com Signed-off-by: Leon Romanovsky --- drivers/infiniband/ulp/rtrs/rtrs-srv.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/infiniband/ulp/rtrs/rtrs-srv.c b/drivers/infiniband/ulp/rtrs/rtrs-srv.c index 75e56604e462..ab4200041fd3 100644 --- a/drivers/infiniband/ulp/rtrs/rtrs-srv.c +++ b/drivers/infiniband/ulp/rtrs/rtrs-srv.c @@ -65,8 +65,9 @@ static bool rtrs_srv_change_state(struct rtrs_srv_path *srv_path, { enum rtrs_srv_state old_state; bool changed = false; + unsigned long flags; - spin_lock_irq(&srv_path->state_lock); + spin_lock_irqsave(&srv_path->state_lock, flags); old_state = srv_path->state; switch (new_state) { case RTRS_SRV_CONNECTED: @@ -87,7 +88,7 @@ static bool rtrs_srv_change_state(struct rtrs_srv_path *srv_path, } if (changed) srv_path->state = new_state; - spin_unlock_irq(&srv_path->state_lock); + spin_unlock_irqrestore(&srv_path->state_lock, flags); return changed; } -- cgit v1.2.3 From 3e44a61b5db873612e20e7b7922468d7d1ac2d22 Mon Sep 17 00:00:00 2001 From: Jack Wang Date: Mon, 20 Nov 2023 16:41:39 +0100 Subject: RDMA/rtrs-clt: Start hb after path_up If we start hb too early, it will confuse server side to close the session. Fixes: 6a98d71daea1 ("RDMA/rtrs: client: main functionality") Signed-off-by: Jack Wang Reviewed-by: Md Haris Iqbal Signed-off-by: Grzegorz Prajsner Link: https://lore.kernel.org/r/20231120154146.920486-3-haris.iqbal@ionos.com Signed-off-by: Leon Romanovsky --- drivers/infiniband/ulp/rtrs/rtrs-clt.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/infiniband/ulp/rtrs/rtrs-clt.c b/drivers/infiniband/ulp/rtrs/rtrs-clt.c index 07261523c554..9bf5f7fb7714 100644 --- a/drivers/infiniband/ulp/rtrs/rtrs-clt.c +++ b/drivers/infiniband/ulp/rtrs/rtrs-clt.c @@ -2350,8 +2350,6 @@ static int init_conns(struct rtrs_clt_path *clt_path) if (err) goto destroy; - rtrs_start_hb(&clt_path->s); - return 0; destroy: @@ -2625,6 +2623,7 @@ static int init_path(struct rtrs_clt_path *clt_path) goto out; } rtrs_clt_path_up(clt_path); + rtrs_start_hb(&clt_path->s); out: mutex_unlock(&clt_path->init_mutex); -- cgit v1.2.3 From ed1e52aefa16f15dc2f04054a3baf11726a7460e Mon Sep 17 00:00:00 2001 From: Md Haris Iqbal Date: Mon, 20 Nov 2023 16:41:40 +0100 Subject: RDMA/rtrs-srv: Check return values while processing info request While processing info request, it could so happen that the srv_path goes to CLOSING state, cause of any of the error events from RDMA. That state change should be picked up while trying to change the state in process_info_req, by checking the return value. In case the state change call in process_info_req fails, we fail the processing. We should also check the return value for rtrs_srv_path_up, since it sends a link event to the client above, and the client can fail for any reason. Fixes: 9cb837480424 ("RDMA/rtrs: server: main functionality") Signed-off-by: Md Haris Iqbal Signed-off-by: Jack Wang Signed-off-by: Grzegorz Prajsner Link: https://lore.kernel.org/r/20231120154146.920486-4-haris.iqbal@ionos.com Signed-off-by: Leon Romanovsky --- drivers/infiniband/ulp/rtrs/rtrs-srv.c | 24 ++++++++++++++++++------ 1 file changed, 18 insertions(+), 6 deletions(-) diff --git a/drivers/infiniband/ulp/rtrs/rtrs-srv.c b/drivers/infiniband/ulp/rtrs/rtrs-srv.c index ab4200041fd3..4be0e5b132d4 100644 --- a/drivers/infiniband/ulp/rtrs/rtrs-srv.c +++ b/drivers/infiniband/ulp/rtrs/rtrs-srv.c @@ -710,20 +710,23 @@ static void rtrs_srv_info_rsp_done(struct ib_cq *cq, struct ib_wc *wc) WARN_ON(wc->opcode != IB_WC_SEND); } -static void rtrs_srv_path_up(struct rtrs_srv_path *srv_path) +static int rtrs_srv_path_up(struct rtrs_srv_path *srv_path) { struct rtrs_srv_sess *srv = srv_path->srv; struct rtrs_srv_ctx *ctx = srv->ctx; - int up; + int up, ret = 0; mutex_lock(&srv->paths_ev_mutex); up = ++srv->paths_up; if (up == 1) - ctx->ops.link_ev(srv, RTRS_SRV_LINK_EV_CONNECTED, NULL); + ret = ctx->ops.link_ev(srv, RTRS_SRV_LINK_EV_CONNECTED, NULL); mutex_unlock(&srv->paths_ev_mutex); /* Mark session as established */ - srv_path->established = true; + if (!ret) + srv_path->established = true; + + return ret; } static void rtrs_srv_path_down(struct rtrs_srv_path *srv_path) @@ -852,7 +855,12 @@ static int process_info_req(struct rtrs_srv_con *con, goto iu_free; kobject_get(&srv_path->kobj); get_device(&srv_path->srv->dev); - rtrs_srv_change_state(srv_path, RTRS_SRV_CONNECTED); + err = rtrs_srv_change_state(srv_path, RTRS_SRV_CONNECTED); + if (!err) { + rtrs_err(s, "rtrs_srv_change_state(), err: %d\n", err); + goto iu_free; + } + rtrs_srv_start_hb(srv_path); /* @@ -861,7 +869,11 @@ static int process_info_req(struct rtrs_srv_con *con, * all connections are successfully established. Thus, simply notify * listener with a proper event if we are the first path. */ - rtrs_srv_path_up(srv_path); + err = rtrs_srv_path_up(srv_path); + if (err) { + rtrs_err(s, "rtrs_srv_path_up(), err: %d\n", err); + goto iu_free; + } ib_dma_sync_single_for_device(srv_path->s.dev->ib_dev, tx_iu->dma_addr, -- cgit v1.2.3 From 3a71cd6ca0ce33d1af019ecf1d7167406fa54400 Mon Sep 17 00:00:00 2001 From: Md Haris Iqbal Date: Mon, 20 Nov 2023 16:41:41 +0100 Subject: RDMA/rtrs-srv: Free srv_mr iu only when always_invalidate is true Since srv_mr->iu is allocated and used only when always_invalidate is true, free it only when always_invalidate is true. Fixes: 9cb837480424 ("RDMA/rtrs: server: main functionality") Signed-off-by: Md Haris Iqbal Signed-off-by: Jack Wang Signed-off-by: Grzegorz Prajsner Link: https://lore.kernel.org/r/20231120154146.920486-5-haris.iqbal@ionos.com Signed-off-by: Leon Romanovsky --- drivers/infiniband/ulp/rtrs/rtrs-srv.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/infiniband/ulp/rtrs/rtrs-srv.c b/drivers/infiniband/ulp/rtrs/rtrs-srv.c index 4be0e5b132d4..925b71481c62 100644 --- a/drivers/infiniband/ulp/rtrs/rtrs-srv.c +++ b/drivers/infiniband/ulp/rtrs/rtrs-srv.c @@ -551,7 +551,10 @@ static void unmap_cont_bufs(struct rtrs_srv_path *srv_path) struct rtrs_srv_mr *srv_mr; srv_mr = &srv_path->mrs[i]; - rtrs_iu_free(srv_mr->iu, srv_path->s.dev->ib_dev, 1); + + if (always_invalidate) + rtrs_iu_free(srv_mr->iu, srv_path->s.dev->ib_dev, 1); + ib_dereg_mr(srv_mr->mr); ib_dma_unmap_sg(srv_path->s.dev->ib_dev, srv_mr->sgt.sgl, srv_mr->sgt.nents, DMA_BIDIRECTIONAL); -- cgit v1.2.3 From c4d32e77fc1006f99eeb78417efc3d81a384072a Mon Sep 17 00:00:00 2001 From: Md Haris Iqbal Date: Mon, 20 Nov 2023 16:41:42 +0100 Subject: RDMA/rtrs-srv: Destroy path files after making sure no IOs in-flight Destroying path files may lead to the freeing of rdma_stats. This creates the following race. An IO is in-flight, or has just passed the session state check in process_read/process_write. The close_work gets triggered and the function rtrs_srv_close_work() starts and does destroy path which frees the rdma_stats. After this the function process_read/process_write resumes and tries to update the stats through the function rtrs_srv_update_rdma_stats This commit solves the problem by moving the destroy path function to a later point. This point makes sure any inflights are completed. This is done by qp drain, and waiting for all in-flights through ops_id. Fixes: 9cb837480424 ("RDMA/rtrs: server: main functionality") Signed-off-by: Md Haris Iqbal Signed-off-by: Santosh Kumar Pradhan Signed-off-by: Grzegorz Prajsner Link: https://lore.kernel.org/r/20231120154146.920486-6-haris.iqbal@ionos.com Signed-off-by: Leon Romanovsky --- drivers/infiniband/ulp/rtrs/rtrs-srv.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/infiniband/ulp/rtrs/rtrs-srv.c b/drivers/infiniband/ulp/rtrs/rtrs-srv.c index 925b71481c62..1d33efb8fb03 100644 --- a/drivers/infiniband/ulp/rtrs/rtrs-srv.c +++ b/drivers/infiniband/ulp/rtrs/rtrs-srv.c @@ -1532,7 +1532,6 @@ static void rtrs_srv_close_work(struct work_struct *work) srv_path = container_of(work, typeof(*srv_path), close_work); - rtrs_srv_destroy_path_files(srv_path); rtrs_srv_stop_hb(srv_path); for (i = 0; i < srv_path->s.con_num; i++) { @@ -1552,6 +1551,8 @@ static void rtrs_srv_close_work(struct work_struct *work) /* Wait for all completion */ wait_for_completion(&srv_path->complete_done); + rtrs_srv_destroy_path_files(srv_path); + /* Notify upper layer if we are the last path */ rtrs_srv_path_down(srv_path); -- cgit v1.2.3 From 6d09f6f7d7584e099633282ea915988914f86529 Mon Sep 17 00:00:00 2001 From: Jack Wang Date: Mon, 20 Nov 2023 16:41:43 +0100 Subject: RDMA/rtrs-clt: Fix the max_send_wr setting For each write request, we need Request, Response Memory Registration, Local Invalidate. Fixes: 6a98d71daea1 ("RDMA/rtrs: client: main functionality") Signed-off-by: Jack Wang Reviewed-by: Md Haris Iqbal Signed-off-by: Grzegorz Prajsner Link: https://lore.kernel.org/r/20231120154146.920486-7-haris.iqbal@ionos.com Signed-off-by: Leon Romanovsky --- drivers/infiniband/ulp/rtrs/rtrs-clt.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/infiniband/ulp/rtrs/rtrs-clt.c b/drivers/infiniband/ulp/rtrs/rtrs-clt.c index 9bf5f7fb7714..16535030b442 100644 --- a/drivers/infiniband/ulp/rtrs/rtrs-clt.c +++ b/drivers/infiniband/ulp/rtrs/rtrs-clt.c @@ -1699,7 +1699,7 @@ static int create_con_cq_qp(struct rtrs_clt_con *con) clt_path->s.dev_ref++; max_send_wr = min_t(int, wr_limit, /* QD * (REQ + RSP + FR REGS or INVS) + drain */ - clt_path->queue_depth * 3 + 1); + clt_path->queue_depth * 4 + 1); max_recv_wr = min_t(int, wr_limit, clt_path->queue_depth * 3 + 1); max_send_sge = 2; -- cgit v1.2.3 From 0c8bb6eb70ca41031f663b4481aac9ac78b53bc6 Mon Sep 17 00:00:00 2001 From: Jack Wang Date: Mon, 20 Nov 2023 16:41:44 +0100 Subject: RDMA/rtrs-clt: Remove the warnings for req in_use check As we chain the WR during write request: memory registration, rdma write, local invalidate, if only the last WR fail to send due to send queue overrun, the server can send back the reply, while client mark the req->in_use to false in case of error in rtrs_clt_req when error out from rtrs_post_rdma_write_sg. Fixes: 6a98d71daea1 ("RDMA/rtrs: client: main functionality") Signed-off-by: Jack Wang Reviewed-by: Md Haris Iqbal Signed-off-by: Grzegorz Prajsner Link: https://lore.kernel.org/r/20231120154146.920486-8-haris.iqbal@ionos.com Signed-off-by: Leon Romanovsky --- drivers/infiniband/ulp/rtrs/rtrs-clt.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/infiniband/ulp/rtrs/rtrs-clt.c b/drivers/infiniband/ulp/rtrs/rtrs-clt.c index 16535030b442..7f3167ce2972 100644 --- a/drivers/infiniband/ulp/rtrs/rtrs-clt.c +++ b/drivers/infiniband/ulp/rtrs/rtrs-clt.c @@ -384,7 +384,7 @@ static void complete_rdma_req(struct rtrs_clt_io_req *req, int errno, struct rtrs_clt_path *clt_path; int err; - if (WARN_ON(!req->in_use)) + if (!req->in_use) return; if (WARN_ON(!req->con)) return; -- cgit v1.2.3 From 8f2244c9af245ff72185c0473827125ee6b2d1a5 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 21 Nov 2023 17:23:59 +0100 Subject: leds: class: Don't expose color sysfs entry MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The commit c7d80059b086 ("leds: class: Store the color index in struct led_classdev") introduced a new sysfs entry "color" that is commonly created for the led classdev. Unfortunately, this conflicts with the "color" sysfs entry of already existing drivers such as Logitech HID or System76 ACPI drivers. The driver probe fails due to the conflict, hence it leads to a severe regression with the missing keyboard, for example. This patch reverts partially the change in the commit above for removing the led class color sysfs entries again for addressing the regressions. The newly introduced led_classdev.color field is kept as it's already used by other driver. Fixes: c7d80059b086 ("leds: class: Store the color index in struct led_classdev") Reported-by: Johannes Penßel Closes: https://lore.kernel.org/r/b5646db3-acff-45aa-baef-df3f660486fb@gmail.com Link: https://bugzilla.kernel.org/show_bug.cgi?id=218045 Link: https://bugzilla.kernel.org/show_bug.cgi?id=218155 Link: https://bugzilla.suse.com/show_bug.cgi?id=1217172 Signed-off-by: Takashi Iwai Reviewed-by: Hans de Goede Link: https://lore.kernel.org/r/20231121162359.9332-1-tiwai@suse.de Signed-off-by: Lee Jones --- Documentation/ABI/testing/sysfs-class-led | 9 --------- drivers/leds/led-class.c | 14 -------------- 2 files changed, 23 deletions(-) diff --git a/Documentation/ABI/testing/sysfs-class-led b/Documentation/ABI/testing/sysfs-class-led index b2ff0012c0f2..2e24ac3bd7ef 100644 --- a/Documentation/ABI/testing/sysfs-class-led +++ b/Documentation/ABI/testing/sysfs-class-led @@ -59,15 +59,6 @@ Description: brightness. Reading this file when no hw brightness change event has happened will return an ENODATA error. -What: /sys/class/leds//color -Date: June 2023 -KernelVersion: 6.5 -Description: - Color of the LED. - - This is a read-only file. Reading this file returns the color - of the LED as a string (e.g: "red", "green", "multicolor"). - What: /sys/class/leds//trigger Date: March 2006 KernelVersion: 2.6.17 diff --git a/drivers/leds/led-class.c b/drivers/leds/led-class.c index 974b84f6bd6a..ba1be15cfd8e 100644 --- a/drivers/leds/led-class.c +++ b/drivers/leds/led-class.c @@ -75,19 +75,6 @@ static ssize_t max_brightness_show(struct device *dev, } static DEVICE_ATTR_RO(max_brightness); -static ssize_t color_show(struct device *dev, - struct device_attribute *attr, char *buf) -{ - const char *color_text = "invalid"; - struct led_classdev *led_cdev = dev_get_drvdata(dev); - - if (led_cdev->color < LED_COLOR_ID_MAX) - color_text = led_colors[led_cdev->color]; - - return sysfs_emit(buf, "%s\n", color_text); -} -static DEVICE_ATTR_RO(color); - #ifdef CONFIG_LEDS_TRIGGERS static BIN_ATTR(trigger, 0644, led_trigger_read, led_trigger_write, 0); static struct bin_attribute *led_trigger_bin_attrs[] = { @@ -102,7 +89,6 @@ static const struct attribute_group led_trigger_group = { static struct attribute *led_class_attrs[] = { &dev_attr_brightness.attr, &dev_attr_max_brightness.attr, - &dev_attr_color.attr, NULL, }; -- cgit v1.2.3 From 422b19f7f006e813ee0865aadce6a62b3c263c42 Mon Sep 17 00:00:00 2001 From: Kalesh AP Date: Tue, 21 Nov 2023 00:29:47 -0800 Subject: RDMA/bnxt_re: Correct module description string The word "Driver" is repeated twice in the "modinfo bnxt_re" output description. Fix it. Fixes: 1ac5a4047975 ("RDMA/bnxt_re: Add bnxt_re RoCE driver") Signed-off-by: Kalesh AP Signed-off-by: Selvin Xavier Link: https://lore.kernel.org/r/1700555387-6277-1-git-send-email-selvin.xavier@broadcom.com Signed-off-by: Leon Romanovsky --- drivers/infiniband/hw/bnxt_re/main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/infiniband/hw/bnxt_re/main.c b/drivers/infiniband/hw/bnxt_re/main.c index f79369c8360a..a99c68247af0 100644 --- a/drivers/infiniband/hw/bnxt_re/main.c +++ b/drivers/infiniband/hw/bnxt_re/main.c @@ -71,7 +71,7 @@ static char version[] = BNXT_RE_DESC "\n"; MODULE_AUTHOR("Eddie Wai "); -MODULE_DESCRIPTION(BNXT_RE_DESC " Driver"); +MODULE_DESCRIPTION(BNXT_RE_DESC); MODULE_LICENSE("Dual BSD/GPL"); /* globals */ -- cgit v1.2.3 From 2b78832f50c4d711e161b166d7d8790968051546 Mon Sep 17 00:00:00 2001 From: Shifeng Li Date: Tue, 21 Nov 2023 02:12:36 -0800 Subject: RDMA/irdma: Fix UAF in irdma_sc_ccq_get_cqe_info() When removing the irdma driver or unplugging its aux device, the ccq queue is released before destorying the cqp_cmpl_wq queue. But in the window, there may still be completion events for wqes. That will cause a UAF in irdma_sc_ccq_get_cqe_info(). [34693.333191] BUG: KASAN: use-after-free in irdma_sc_ccq_get_cqe_info+0x82f/0x8c0 [irdma] [34693.333194] Read of size 8 at addr ffff889097f80818 by task kworker/u67:1/26327 [34693.333194] [34693.333199] CPU: 9 PID: 26327 Comm: kworker/u67:1 Kdump: loaded Tainted: G O --------- -t - 4.18.0 #1 [34693.333200] Hardware name: SANGFOR Inspur/NULL, BIOS 4.1.13 08/01/2016 [34693.333211] Workqueue: cqp_cmpl_wq cqp_compl_worker [irdma] [34693.333213] Call Trace: [34693.333220] dump_stack+0x71/0xab [34693.333226] print_address_description+0x6b/0x290 [34693.333238] ? irdma_sc_ccq_get_cqe_info+0x82f/0x8c0 [irdma] [34693.333240] kasan_report+0x14a/0x2b0 [34693.333251] irdma_sc_ccq_get_cqe_info+0x82f/0x8c0 [irdma] [34693.333264] ? irdma_free_cqp_request+0x151/0x1e0 [irdma] [34693.333274] irdma_cqp_ce_handler+0x1fb/0x3b0 [irdma] [34693.333285] ? irdma_ctrl_init_hw+0x2c20/0x2c20 [irdma] [34693.333290] ? __schedule+0x836/0x1570 [34693.333293] ? strscpy+0x83/0x180 [34693.333296] process_one_work+0x56a/0x11f0 [34693.333298] worker_thread+0x8f/0xf40 [34693.333301] ? __kthread_parkme+0x78/0xf0 [34693.333303] ? rescuer_thread+0xc50/0xc50 [34693.333305] kthread+0x2a0/0x390 [34693.333308] ? kthread_destroy_worker+0x90/0x90 [34693.333310] ret_from_fork+0x1f/0x40 Fixes: 44d9e52977a1 ("RDMA/irdma: Implement device initialization definitions") Signed-off-by: Shifeng Li Link: https://lore.kernel.org/r/20231121101236.581694-1-lishifeng1992@126.com Acked-by: Shiraz Saleem Signed-off-by: Leon Romanovsky --- drivers/infiniband/hw/irdma/hw.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/infiniband/hw/irdma/hw.c b/drivers/infiniband/hw/irdma/hw.c index 74f6bc7b7ad1..64a382070e5c 100644 --- a/drivers/infiniband/hw/irdma/hw.c +++ b/drivers/infiniband/hw/irdma/hw.c @@ -585,9 +585,6 @@ static void irdma_destroy_cqp(struct irdma_pci_f *rf) struct irdma_cqp *cqp = &rf->cqp; int status = 0; - if (rf->cqp_cmpl_wq) - destroy_workqueue(rf->cqp_cmpl_wq); - status = irdma_sc_cqp_destroy(dev->cqp); if (status) ibdev_dbg(to_ibdev(dev), "ERR: Destroy CQP failed %d\n", status); @@ -752,6 +749,9 @@ static void irdma_destroy_ccq(struct irdma_pci_f *rf) struct irdma_ccq *ccq = &rf->ccq; int status = 0; + if (rf->cqp_cmpl_wq) + destroy_workqueue(rf->cqp_cmpl_wq); + if (!rf->reset) status = irdma_sc_ccq_destroy(dev->ccq, 0, true); if (status) -- cgit v1.2.3 From c33fd110424dfcb544cf55a1b312f43fe1918235 Mon Sep 17 00:00:00 2001 From: Shengjiu Wang Date: Wed, 22 Nov 2023 09:42:53 +0800 Subject: ASoC: fsl_xcvr: Enable 2 * TX bit clock for spdif only case The bit 10 in TX_DPTH_CTRL register controls the TX clock rate. If this bit is set, TX datapath clock should be = 2* TX bit rate. If this bit is not set, TX datapath clock should be 10* TX bit rate. As the spdif only case, we always use 2 * TX bit clock, so this bit need to be set. Signed-off-by: Shengjiu Wang Link: https://lore.kernel.org/r/1700617373-6472-1-git-send-email-shengjiu.wang@nxp.com Signed-off-by: Mark Brown --- sound/soc/fsl/fsl_xcvr.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/sound/soc/fsl/fsl_xcvr.c b/sound/soc/fsl/fsl_xcvr.c index fa0a15263c66..77f8e2394bf9 100644 --- a/sound/soc/fsl/fsl_xcvr.c +++ b/sound/soc/fsl/fsl_xcvr.c @@ -414,6 +414,16 @@ static int fsl_xcvr_prepare(struct snd_pcm_substream *substream, switch (xcvr->mode) { case FSL_XCVR_MODE_SPDIF: + if (xcvr->soc_data->spdif_only && tx) { + ret = regmap_update_bits(xcvr->regmap, FSL_XCVR_TX_DPTH_CTRL_SET, + FSL_XCVR_TX_DPTH_CTRL_BYPASS_FEM, + FSL_XCVR_TX_DPTH_CTRL_BYPASS_FEM); + if (ret < 0) { + dev_err(dai->dev, "Failed to set bypass fem: %d\n", ret); + return ret; + } + } + fallthrough; case FSL_XCVR_MODE_ARC: if (tx) { ret = fsl_xcvr_en_aud_pll(xcvr, fout); -- cgit v1.2.3 From e6d71b437abc2f249e3b6a1ae1a7228e09c6e563 Mon Sep 17 00:00:00 2001 From: "D. Wythe" Date: Wed, 22 Nov 2023 10:37:05 +0800 Subject: net/smc: avoid data corruption caused by decline MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit We found a data corruption issue during testing of SMC-R on Redis applications. The benchmark has a low probability of reporting a strange error as shown below. "Error: Protocol error, got "\xe2" as reply type byte" Finally, we found that the retrieved error data was as follows: 0xE2 0xD4 0xC3 0xD9 0x04 0x00 0x2C 0x20 0xA6 0x56 0x00 0x16 0x3E 0x0C 0xCB 0x04 0x02 0x01 0x00 0x00 0x20 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0xE2 It is quite obvious that this is a SMC DECLINE message, which means that the applications received SMC protocol message. We found that this was caused by the following situations: client server ¦ clc proposal -------------> ¦ clc accept <------------- ¦ clc confirm -------------> wait llc confirm send llc confirm ¦failed llc confirm ¦ x------ (after 2s)timeout wait llc confirm rsp wait decline (after 1s) timeout (after 2s) timeout ¦ decline --------------> ¦ decline <-------------- As a result, a decline message was sent in the implementation, and this message was read from TCP by the already-fallback connection. This patch double the client timeout as 2x of the server value, With this simple change, the Decline messages should never cross or collide (during Confirm link timeout). This issue requires an immediate solution, since the protocol updates involve a more long-term solution. Fixes: 0fb0b02bd6fd ("net/smc: adapt SMC client code to use the LLC flow") Signed-off-by: D. Wythe Reviewed-by: Wen Gu Reviewed-by: Wenjia Zhang Signed-off-by: David S. Miller --- net/smc/af_smc.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/net/smc/af_smc.c b/net/smc/af_smc.c index da97f946b79b..2a1388841951 100644 --- a/net/smc/af_smc.c +++ b/net/smc/af_smc.c @@ -598,8 +598,12 @@ static int smcr_clnt_conf_first_link(struct smc_sock *smc) struct smc_llc_qentry *qentry; int rc; - /* receive CONFIRM LINK request from server over RoCE fabric */ - qentry = smc_llc_wait(link->lgr, NULL, SMC_LLC_WAIT_TIME, + /* Receive CONFIRM LINK request from server over RoCE fabric. + * Increasing the client's timeout by twice as much as the server's + * timeout by default can temporarily avoid decline messages of + * both sides crossing or colliding + */ + qentry = smc_llc_wait(link->lgr, NULL, 2 * SMC_LLC_WAIT_TIME, SMC_LLC_CONFIRM_LINK); if (!qentry) { struct smc_clc_msg_decline dclc; -- cgit v1.2.3 From 372ee6a3368ec6ff46ee4e6ff4ffe2fe1e059dbb Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Tue, 21 Nov 2023 21:32:05 +0100 Subject: usb: misc: ljca: Fix enumeration error on Dell Latitude 9420 Not all LJCA chips implement SPI and on chips without SPI reading the SPI descriptors will timeout. On laptop models like the Dell Latitude 9420, this is expected behavior and not an error. Modify the driver to continue without instantiating a SPI auxbus child, instead of failing to probe() the whole LJCA chip. Fixes: acd6199f195d ("usb: Add support for Intel LJCA device") Signed-off-by: Hans de Goede Reviewed-by: Wentong Wu Link: https://lore.kernel.org/r/20231104175104.38786-1-hdegoede@redhat.com Link: https://lore.kernel.org/r/20231121203205.223047-1-hdegoede@redhat.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/misc/usb-ljca.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/usb/misc/usb-ljca.c b/drivers/usb/misc/usb-ljca.c index 7f0deebebc13..35770e608c64 100644 --- a/drivers/usb/misc/usb-ljca.c +++ b/drivers/usb/misc/usb-ljca.c @@ -646,10 +646,11 @@ static int ljca_enumerate_spi(struct ljca_adapter *adap) unsigned int i; int ret; + /* Not all LJCA chips implement SPI, a timeout reading the descriptors is normal */ ret = ljca_send(adap, LJCA_CLIENT_MNG, LJCA_MNG_ENUM_SPI, NULL, 0, buf, sizeof(buf), true, LJCA_ENUM_CLIENT_TIMEOUT_MS); if (ret < 0) - return ret; + return (ret == -ETIMEDOUT) ? 0 : ret; /* check firmware response */ desc = (struct ljca_spi_descriptor *)buf; -- cgit v1.2.3 From 6a26310273c323380da21eb23fcfd50e31140913 Mon Sep 17 00:00:00 2001 From: Heiner Kallweit Date: Tue, 21 Nov 2023 09:09:33 +0100 Subject: Revert "net: r8169: Disable multicast filter for RTL8168H and RTL8107E" This reverts commit efa5f1311c4998e9e6317c52bc5ee93b3a0f36df. I couldn't reproduce the reported issue. What I did, based on a pcap packet log provided by the reporter: - Used same chip version (RTL8168h) - Set MAC address to the one used on the reporters system - Replayed the EAPOL unicast packet that, according to the reporter, was filtered out by the mc filter. The packet was properly received. Therefore the root cause of the reported issue seems to be somewhere else. Disabling mc filtering completely for the most common chip version is a quite big hammer. Therefore revert the change and wait for further analysis results from the reporter. Cc: stable@vger.kernel.org Signed-off-by: Heiner Kallweit Signed-off-by: David S. Miller --- drivers/net/ethernet/realtek/r8169_main.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/drivers/net/ethernet/realtek/r8169_main.c b/drivers/net/ethernet/realtek/r8169_main.c index b9bb1d2f0237..295366a85c63 100644 --- a/drivers/net/ethernet/realtek/r8169_main.c +++ b/drivers/net/ethernet/realtek/r8169_main.c @@ -2599,9 +2599,7 @@ static void rtl_set_rx_mode(struct net_device *dev) rx_mode &= ~AcceptMulticast; } else if (netdev_mc_count(dev) > MC_FILTER_LIMIT || dev->flags & IFF_ALLMULTI || - tp->mac_version == RTL_GIGA_MAC_VER_35 || - tp->mac_version == RTL_GIGA_MAC_VER_46 || - tp->mac_version == RTL_GIGA_MAC_VER_48) { + tp->mac_version == RTL_GIGA_MAC_VER_35) { /* accept all multicasts */ } else if (netdev_mc_empty(dev)) { rx_mode &= ~AcceptMulticast; -- cgit v1.2.3 From d0c930b745cafde8e7d25d0356c648bca669556a Mon Sep 17 00:00:00 2001 From: Stefan Eichenberger Date: Mon, 13 Nov 2023 15:59:20 +0100 Subject: dt-bindings: usb: microchip,usb5744: Add second supply The USB5744 has two power supplies one for 3V3 and one for 1V2. Add the second supply to the USB5744 DT binding. Signed-off-by: Stefan Eichenberger Signed-off-by: Francesco Dolcini Acked-by: Conor Dooley Cc: stable Link: https://lore.kernel.org/r/20231113145921.30104-2-francesco@dolcini.it Signed-off-by: Greg Kroah-Hartman --- Documentation/devicetree/bindings/usb/microchip,usb5744.yaml | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/usb/microchip,usb5744.yaml b/Documentation/devicetree/bindings/usb/microchip,usb5744.yaml index ff3a1707ef57..6d4cfd943f58 100644 --- a/Documentation/devicetree/bindings/usb/microchip,usb5744.yaml +++ b/Documentation/devicetree/bindings/usb/microchip,usb5744.yaml @@ -36,7 +36,11 @@ properties: vdd-supply: description: - VDD power supply to the hub + 3V3 power supply to the hub + + vdd2-supply: + description: + 1V2 power supply to the hub peer-hub: $ref: /schemas/types.yaml#/definitions/phandle @@ -62,6 +66,7 @@ allOf: properties: reset-gpios: false vdd-supply: false + vdd2-supply: false peer-hub: false i2c-bus: false else: -- cgit v1.2.3 From 6972b38ca05235f6142715db7062ecc87a422e22 Mon Sep 17 00:00:00 2001 From: Stefan Eichenberger Date: Mon, 13 Nov 2023 15:59:21 +0100 Subject: usb: misc: onboard-hub: add support for Microchip USB5744 Add support for the Microchip USB5744 USB3.0 and USB2.0 Hub. The Microchip USB5744 supports two power supplies, one for 1V2 and one for 3V3. According to the datasheet there is no need for a delay between power on and reset, so this value is set to 0. Signed-off-by: Stefan Eichenberger Signed-off-by: Francesco Dolcini Cc: stable Acked-by: Matthias Kaehlcke Link: https://lore.kernel.org/r/20231113145921.30104-3-francesco@dolcini.it Signed-off-by: Greg Kroah-Hartman --- drivers/usb/misc/onboard_usb_hub.c | 2 ++ drivers/usb/misc/onboard_usb_hub.h | 7 +++++++ 2 files changed, 9 insertions(+) diff --git a/drivers/usb/misc/onboard_usb_hub.c b/drivers/usb/misc/onboard_usb_hub.c index a341b2fbb7b4..2b45404e9732 100644 --- a/drivers/usb/misc/onboard_usb_hub.c +++ b/drivers/usb/misc/onboard_usb_hub.c @@ -432,6 +432,8 @@ static const struct usb_device_id onboard_hub_id_table[] = { { USB_DEVICE(VENDOR_ID_MICROCHIP, 0x2412) }, /* USB2412 USB 2.0 */ { USB_DEVICE(VENDOR_ID_MICROCHIP, 0x2514) }, /* USB2514B USB 2.0 */ { USB_DEVICE(VENDOR_ID_MICROCHIP, 0x2517) }, /* USB2517 USB 2.0 */ + { USB_DEVICE(VENDOR_ID_MICROCHIP, 0x2744) }, /* USB5744 USB 2.0 */ + { USB_DEVICE(VENDOR_ID_MICROCHIP, 0x5744) }, /* USB5744 USB 3.0 */ { USB_DEVICE(VENDOR_ID_REALTEK, 0x0411) }, /* RTS5411 USB 3.1 */ { USB_DEVICE(VENDOR_ID_REALTEK, 0x5411) }, /* RTS5411 USB 2.1 */ { USB_DEVICE(VENDOR_ID_REALTEK, 0x0414) }, /* RTS5414 USB 3.2 */ diff --git a/drivers/usb/misc/onboard_usb_hub.h b/drivers/usb/misc/onboard_usb_hub.h index c4e24a7b9290..292110e64a1d 100644 --- a/drivers/usb/misc/onboard_usb_hub.h +++ b/drivers/usb/misc/onboard_usb_hub.h @@ -16,6 +16,11 @@ static const struct onboard_hub_pdata microchip_usb424_data = { .num_supplies = 1, }; +static const struct onboard_hub_pdata microchip_usb5744_data = { + .reset_us = 0, + .num_supplies = 2, +}; + static const struct onboard_hub_pdata realtek_rts5411_data = { .reset_us = 0, .num_supplies = 1, @@ -50,6 +55,8 @@ static const struct of_device_id onboard_hub_match[] = { { .compatible = "usb424,2412", .data = µchip_usb424_data, }, { .compatible = "usb424,2514", .data = µchip_usb424_data, }, { .compatible = "usb424,2517", .data = µchip_usb424_data, }, + { .compatible = "usb424,2744", .data = µchip_usb5744_data, }, + { .compatible = "usb424,5744", .data = µchip_usb5744_data, }, { .compatible = "usb451,8140", .data = &ti_tusb8041_data, }, { .compatible = "usb451,8142", .data = &ti_tusb8041_data, }, { .compatible = "usb4b4,6504", .data = &cypress_hx3_data, }, -- cgit v1.2.3 From 0c2671f33a9c975d752216739d6a05cb88e98aa4 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 20 Nov 2023 17:16:05 +0100 Subject: dt-bindings: usb: qcom,dwc3: fix example wakeup interrupt types The DP/DM wakeup interrupts are edge triggered and which edge to trigger on depends on use-case and whether a Low speed or Full/High speed device is connected. Fixes: 3828026c9ec8 ("dt-bindings: usb: qcom,dwc3: Convert USB DWC3 bindings") Signed-off-by: Johan Hovold Acked-by: Krzysztof Kozlowski Reviewed-by: Andrew Halaney Link: https://lore.kernel.org/r/20231120161607.7405-2-johan+linaro@kernel.org Signed-off-by: Greg Kroah-Hartman --- Documentation/devicetree/bindings/usb/qcom,dwc3.yaml | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml index e889158ca205..915c8205623b 100644 --- a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml +++ b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml @@ -521,8 +521,8 @@ examples: interrupts = , , - , - ; + , + ; interrupt-names = "hs_phy_irq", "ss_phy_irq", "dm_hs_phy_irq", "dp_hs_phy_irq"; -- cgit v1.2.3 From 41f5a0973259db9e4e3c9963d36505f80107d1a0 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 20 Nov 2023 17:16:06 +0100 Subject: USB: dwc3: qcom: fix wakeup after probe deferral The Qualcomm glue driver is overriding the interrupt trigger types defined by firmware when requesting the wakeup interrupts during probe. This can lead to a failure to map the DP/DM wakeup interrupts after a probe deferral as the firmware defined trigger types do not match the type used for the initial mapping: irq: type mismatch, failed to map hwirq-14 for interrupt-controller@b220000! irq: type mismatch, failed to map hwirq-15 for interrupt-controller@b220000! Fix this by not overriding the firmware provided trigger types when requesting the wakeup interrupts. Fixes: a4333c3a6ba9 ("usb: dwc3: Add Qualcomm DWC3 glue driver") Cc: stable@vger.kernel.org # 4.18 Signed-off-by: Johan Hovold Reviewed-by: Andrew Halaney Link: https://lore.kernel.org/r/20231120161607.7405-3-johan+linaro@kernel.org Signed-off-by: Greg Kroah-Hartman --- drivers/usb/dwc3/dwc3-qcom.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/usb/dwc3/dwc3-qcom.c b/drivers/usb/dwc3/dwc3-qcom.c index 3de43df6bbe8..cf200342273a 100644 --- a/drivers/usb/dwc3/dwc3-qcom.c +++ b/drivers/usb/dwc3/dwc3-qcom.c @@ -549,7 +549,7 @@ static int dwc3_qcom_setup_irq(struct platform_device *pdev) irq_set_status_flags(irq, IRQ_NOAUTOEN); ret = devm_request_threaded_irq(qcom->dev, irq, NULL, qcom_dwc3_resume_irq, - IRQF_TRIGGER_HIGH | IRQF_ONESHOT, + IRQF_ONESHOT, "qcom_dwc3 HS", qcom); if (ret) { dev_err(qcom->dev, "hs_phy_irq failed: %d\n", ret); @@ -564,7 +564,7 @@ static int dwc3_qcom_setup_irq(struct platform_device *pdev) irq_set_status_flags(irq, IRQ_NOAUTOEN); ret = devm_request_threaded_irq(qcom->dev, irq, NULL, qcom_dwc3_resume_irq, - IRQF_TRIGGER_HIGH | IRQF_ONESHOT, + IRQF_ONESHOT, "qcom_dwc3 DP_HS", qcom); if (ret) { dev_err(qcom->dev, "dp_hs_phy_irq failed: %d\n", ret); @@ -579,7 +579,7 @@ static int dwc3_qcom_setup_irq(struct platform_device *pdev) irq_set_status_flags(irq, IRQ_NOAUTOEN); ret = devm_request_threaded_irq(qcom->dev, irq, NULL, qcom_dwc3_resume_irq, - IRQF_TRIGGER_HIGH | IRQF_ONESHOT, + IRQF_ONESHOT, "qcom_dwc3 DM_HS", qcom); if (ret) { dev_err(qcom->dev, "dm_hs_phy_irq failed: %d\n", ret); @@ -594,7 +594,7 @@ static int dwc3_qcom_setup_irq(struct platform_device *pdev) irq_set_status_flags(irq, IRQ_NOAUTOEN); ret = devm_request_threaded_irq(qcom->dev, irq, NULL, qcom_dwc3_resume_irq, - IRQF_TRIGGER_HIGH | IRQF_ONESHOT, + IRQF_ONESHOT, "qcom_dwc3 SS", qcom); if (ret) { dev_err(qcom->dev, "ss_phy_irq failed: %d\n", ret); -- cgit v1.2.3 From aee70a1d711327dae409671035a0368c1dc4a2ea Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 20 Nov 2023 17:16:07 +0100 Subject: USB: dwc3: qcom: simplify wakeup interrupt setup Use the IRQF_NO_AUTOEN irq flag when requesting the wakeup interrupts instead of setting it separately. No functional change intended. Signed-off-by: Johan Hovold Reviewed-by: Andrew Halaney Link: https://lore.kernel.org/r/20231120161607.7405-4-johan+linaro@kernel.org Signed-off-by: Greg Kroah-Hartman --- drivers/usb/dwc3/dwc3-qcom.c | 12 ++++-------- 1 file changed, 4 insertions(+), 8 deletions(-) diff --git a/drivers/usb/dwc3/dwc3-qcom.c b/drivers/usb/dwc3/dwc3-qcom.c index cf200342273a..8a76973f1fa2 100644 --- a/drivers/usb/dwc3/dwc3-qcom.c +++ b/drivers/usb/dwc3/dwc3-qcom.c @@ -546,10 +546,9 @@ static int dwc3_qcom_setup_irq(struct platform_device *pdev) pdata ? pdata->hs_phy_irq_index : -1); if (irq > 0) { /* Keep wakeup interrupts disabled until suspend */ - irq_set_status_flags(irq, IRQ_NOAUTOEN); ret = devm_request_threaded_irq(qcom->dev, irq, NULL, qcom_dwc3_resume_irq, - IRQF_ONESHOT, + IRQF_ONESHOT | IRQF_NO_AUTOEN, "qcom_dwc3 HS", qcom); if (ret) { dev_err(qcom->dev, "hs_phy_irq failed: %d\n", ret); @@ -561,10 +560,9 @@ static int dwc3_qcom_setup_irq(struct platform_device *pdev) irq = dwc3_qcom_get_irq(pdev, "dp_hs_phy_irq", pdata ? pdata->dp_hs_phy_irq_index : -1); if (irq > 0) { - irq_set_status_flags(irq, IRQ_NOAUTOEN); ret = devm_request_threaded_irq(qcom->dev, irq, NULL, qcom_dwc3_resume_irq, - IRQF_ONESHOT, + IRQF_ONESHOT | IRQF_NO_AUTOEN, "qcom_dwc3 DP_HS", qcom); if (ret) { dev_err(qcom->dev, "dp_hs_phy_irq failed: %d\n", ret); @@ -576,10 +574,9 @@ static int dwc3_qcom_setup_irq(struct platform_device *pdev) irq = dwc3_qcom_get_irq(pdev, "dm_hs_phy_irq", pdata ? pdata->dm_hs_phy_irq_index : -1); if (irq > 0) { - irq_set_status_flags(irq, IRQ_NOAUTOEN); ret = devm_request_threaded_irq(qcom->dev, irq, NULL, qcom_dwc3_resume_irq, - IRQF_ONESHOT, + IRQF_ONESHOT | IRQF_NO_AUTOEN, "qcom_dwc3 DM_HS", qcom); if (ret) { dev_err(qcom->dev, "dm_hs_phy_irq failed: %d\n", ret); @@ -591,10 +588,9 @@ static int dwc3_qcom_setup_irq(struct platform_device *pdev) irq = dwc3_qcom_get_irq(pdev, "ss_phy_irq", pdata ? pdata->ss_phy_irq_index : -1); if (irq > 0) { - irq_set_status_flags(irq, IRQ_NOAUTOEN); ret = devm_request_threaded_irq(qcom->dev, irq, NULL, qcom_dwc3_resume_irq, - IRQF_ONESHOT, + IRQF_ONESHOT | IRQF_NO_AUTOEN, "qcom_dwc3 SS", qcom); if (ret) { dev_err(qcom->dev, "ss_phy_irq failed: %d\n", ret); -- cgit v1.2.3 From 51392a1879ff06dc21b68aef4825f6ef68a7be42 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Fri, 17 Nov 2023 18:36:48 +0100 Subject: USB: dwc3: qcom: fix resource leaks on probe deferral The driver needs to deregister and free the newly allocated dwc3 core platform device on ACPI probe errors (e.g. probe deferral) and on driver unbind but instead it leaked those resources while erroneously dropping a reference to the parent platform device which is still in use. For OF probing the driver takes a reference to the dwc3 core platform device which has also always been leaked. Fix the broken ACPI tear down and make sure to drop the dwc3 core reference for both OF and ACPI. Fixes: 8fd95da2cfb5 ("usb: dwc3: qcom: Release the correct resources in dwc3_qcom_remove()") Fixes: 2bc02355f8ba ("usb: dwc3: qcom: Add support for booting with ACPI") Fixes: a4333c3a6ba9 ("usb: dwc3: Add Qualcomm DWC3 glue driver") Cc: stable@vger.kernel.org # 4.18 Cc: Christophe JAILLET Cc: Lee Jones Signed-off-by: Johan Hovold Acked-by: Andrew Halaney Link: https://lore.kernel.org/r/20231117173650.21161-2-johan+linaro@kernel.org Signed-off-by: Greg Kroah-Hartman --- drivers/usb/dwc3/dwc3-qcom.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/drivers/usb/dwc3/dwc3-qcom.c b/drivers/usb/dwc3/dwc3-qcom.c index 8a76973f1fa2..313a8ac2bd60 100644 --- a/drivers/usb/dwc3/dwc3-qcom.c +++ b/drivers/usb/dwc3/dwc3-qcom.c @@ -754,6 +754,7 @@ static int dwc3_qcom_of_register_core(struct platform_device *pdev) if (!qcom->dwc3) { ret = -ENODEV; dev_err(dev, "failed to get dwc3 platform device\n"); + of_platform_depopulate(dev); } node_put: @@ -895,7 +896,7 @@ static int dwc3_qcom_probe(struct platform_device *pdev) if (ret) { dev_err(dev, "failed to register DWC3 Core, err=%d\n", ret); - goto depopulate; + goto clk_disable; } ret = dwc3_qcom_interconnect_init(qcom); @@ -930,7 +931,8 @@ depopulate: if (np) of_platform_depopulate(&pdev->dev); else - platform_device_put(pdev); + platform_device_del(qcom->dwc3); + platform_device_put(qcom->dwc3); clk_disable: for (i = qcom->num_clocks - 1; i >= 0; i--) { clk_disable_unprepare(qcom->clks[i]); @@ -953,7 +955,8 @@ static void dwc3_qcom_remove(struct platform_device *pdev) if (np) of_platform_depopulate(&pdev->dev); else - platform_device_put(pdev); + platform_device_del(qcom->dwc3); + platform_device_put(qcom->dwc3); for (i = qcom->num_clocks - 1; i >= 0; i--) { clk_disable_unprepare(qcom->clks[i]); -- cgit v1.2.3 From 9feefbf57d92e8ee293dad67585d351c7d0b6e37 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Fri, 17 Nov 2023 18:36:49 +0100 Subject: USB: dwc3: qcom: fix software node leak on probe errors Make sure to remove the software node also on (ACPI) probe errors to avoid leaking the underlying resources. Note that the software node is only used for ACPI probe so the driver unbind tear down is updated to match probe. Fixes: 8dc6e6dd1bee ("usb: dwc3: qcom: Constify the software node") Cc: stable@vger.kernel.org # 5.12 Cc: Heikki Krogerus Signed-off-by: Johan Hovold Acked-by: Heikki Krogerus Acked-by: Andrew Halaney Link: https://lore.kernel.org/r/20231117173650.21161-3-johan+linaro@kernel.org Signed-off-by: Greg Kroah-Hartman --- drivers/usb/dwc3/dwc3-qcom.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) diff --git a/drivers/usb/dwc3/dwc3-qcom.c b/drivers/usb/dwc3/dwc3-qcom.c index 313a8ac2bd60..a9bce4548019 100644 --- a/drivers/usb/dwc3/dwc3-qcom.c +++ b/drivers/usb/dwc3/dwc3-qcom.c @@ -928,10 +928,12 @@ static int dwc3_qcom_probe(struct platform_device *pdev) interconnect_exit: dwc3_qcom_interconnect_exit(qcom); depopulate: - if (np) + if (np) { of_platform_depopulate(&pdev->dev); - else + } else { + device_remove_software_node(&qcom->dwc3->dev); platform_device_del(qcom->dwc3); + } platform_device_put(qcom->dwc3); clk_disable: for (i = qcom->num_clocks - 1; i >= 0; i--) { @@ -951,11 +953,12 @@ static void dwc3_qcom_remove(struct platform_device *pdev) struct device *dev = &pdev->dev; int i; - device_remove_software_node(&qcom->dwc3->dev); - if (np) + if (np) { of_platform_depopulate(&pdev->dev); - else + } else { + device_remove_software_node(&qcom->dwc3->dev); platform_device_del(qcom->dwc3); + } platform_device_put(qcom->dwc3); for (i = qcom->num_clocks - 1; i >= 0; i--) { -- cgit v1.2.3 From 9cf87666fc6e08572341fe08ecd909935998fbbd Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Fri, 17 Nov 2023 18:36:50 +0100 Subject: USB: dwc3: qcom: fix ACPI platform device leak Make sure to free the "urs" platform device, which is created for some ACPI platforms, on probe errors and on driver unbind. Compile-tested only. Fixes: c25c210f590e ("usb: dwc3: qcom: add URS Host support for sdm845 ACPI boot") Cc: Shawn Guo Signed-off-by: Johan Hovold Acked-by: Andrew Halaney Acked-by: Shawn Guo Link: https://lore.kernel.org/r/20231117173650.21161-4-johan+linaro@kernel.org Signed-off-by: Greg Kroah-Hartman --- drivers/usb/dwc3/dwc3-qcom.c | 37 ++++++++++++++++++++++++++++++------- 1 file changed, 30 insertions(+), 7 deletions(-) diff --git a/drivers/usb/dwc3/dwc3-qcom.c b/drivers/usb/dwc3/dwc3-qcom.c index a9bce4548019..fdf6d5d3c2ad 100644 --- a/drivers/usb/dwc3/dwc3-qcom.c +++ b/drivers/usb/dwc3/dwc3-qcom.c @@ -763,9 +763,9 @@ node_put: return ret; } -static struct platform_device * -dwc3_qcom_create_urs_usb_platdev(struct device *dev) +static struct platform_device *dwc3_qcom_create_urs_usb_platdev(struct device *dev) { + struct platform_device *urs_usb = NULL; struct fwnode_handle *fwh; struct acpi_device *adev; char name[8]; @@ -785,9 +785,26 @@ dwc3_qcom_create_urs_usb_platdev(struct device *dev) adev = to_acpi_device_node(fwh); if (!adev) - return NULL; + goto err_put_handle; + + urs_usb = acpi_create_platform_device(adev, NULL); + if (IS_ERR_OR_NULL(urs_usb)) + goto err_put_handle; + + return urs_usb; - return acpi_create_platform_device(adev, NULL); +err_put_handle: + fwnode_handle_put(fwh); + + return urs_usb; +} + +static void dwc3_qcom_destroy_urs_usb_platdev(struct platform_device *urs_usb) +{ + struct fwnode_handle *fwh = urs_usb->dev.fwnode; + + platform_device_unregister(urs_usb); + fwnode_handle_put(fwh); } static int dwc3_qcom_probe(struct platform_device *pdev) @@ -871,13 +888,13 @@ static int dwc3_qcom_probe(struct platform_device *pdev) qcom->qscratch_base = devm_ioremap_resource(dev, parent_res); if (IS_ERR(qcom->qscratch_base)) { ret = PTR_ERR(qcom->qscratch_base); - goto clk_disable; + goto free_urs; } ret = dwc3_qcom_setup_irq(pdev); if (ret) { dev_err(dev, "failed to setup IRQs, err=%d\n", ret); - goto clk_disable; + goto free_urs; } /* @@ -896,7 +913,7 @@ static int dwc3_qcom_probe(struct platform_device *pdev) if (ret) { dev_err(dev, "failed to register DWC3 Core, err=%d\n", ret); - goto clk_disable; + goto free_urs; } ret = dwc3_qcom_interconnect_init(qcom); @@ -935,6 +952,9 @@ depopulate: platform_device_del(qcom->dwc3); } platform_device_put(qcom->dwc3); +free_urs: + if (qcom->urs_usb) + dwc3_qcom_destroy_urs_usb_platdev(qcom->urs_usb); clk_disable: for (i = qcom->num_clocks - 1; i >= 0; i--) { clk_disable_unprepare(qcom->clks[i]); @@ -961,6 +981,9 @@ static void dwc3_qcom_remove(struct platform_device *pdev) } platform_device_put(qcom->dwc3); + if (qcom->urs_usb) + dwc3_qcom_destroy_urs_usb_platdev(qcom->urs_usb); + for (i = qcom->num_clocks - 1; i >= 0; i--) { clk_disable_unprepare(qcom->clks[i]); clk_put(qcom->clks[i]); -- cgit v1.2.3 From 4711b7b8f99583f6105a33e91f106125134beacb Mon Sep 17 00:00:00 2001 From: Thomas Richter Date: Mon, 30 Oct 2023 11:41:33 +0100 Subject: s390/pai: cleanup event initialization Setting event::hw.last_tag to zero is not necessary. The memory for each event is dynamically allocated by the kernel common code and initialized to zero already. Remove this unnecessary assignment. Move the comment to function paicrypt_start() for clarification. Suggested-by: Sumanth Korikkar Acked-by: Sumanth Korikkar Signed-off-by: Thomas Richter Signed-off-by: Alexander Gordeev --- arch/s390/kernel/perf_pai_crypto.c | 11 +++++------ arch/s390/kernel/perf_pai_ext.c | 1 - 2 files changed, 5 insertions(+), 7 deletions(-) diff --git a/arch/s390/kernel/perf_pai_crypto.c b/arch/s390/kernel/perf_pai_crypto.c index 77fd24e6cbb6..39a91b00438a 100644 --- a/arch/s390/kernel/perf_pai_crypto.c +++ b/arch/s390/kernel/perf_pai_crypto.c @@ -279,12 +279,6 @@ static int paicrypt_event_init(struct perf_event *event) if (IS_ERR(cpump)) return PTR_ERR(cpump); - /* Event initialization sets last_tag to 0. When later on the events - * are deleted and re-added, do not reset the event count value to zero. - * Events are added, deleted and re-added when 2 or more events - * are active at the same time. - */ - event->hw.last_tag = 0; event->destroy = paicrypt_event_destroy; if (a->sample_period) { @@ -318,6 +312,11 @@ static void paicrypt_start(struct perf_event *event, int flags) { u64 sum; + /* Event initialization sets last_tag to 0. When later on the events + * are deleted and re-added, do not reset the event count value to zero. + * Events are added, deleted and re-added when 2 or more events + * are active at the same time. + */ if (!event->hw.last_tag) { event->hw.last_tag = 1; sum = paicrypt_getall(event); /* Get current value */ diff --git a/arch/s390/kernel/perf_pai_ext.c b/arch/s390/kernel/perf_pai_ext.c index 8ba0f1a3a39d..e7013a2e8960 100644 --- a/arch/s390/kernel/perf_pai_ext.c +++ b/arch/s390/kernel/perf_pai_ext.c @@ -260,7 +260,6 @@ static int paiext_event_init(struct perf_event *event) rc = paiext_alloc(a, event); if (rc) return rc; - event->hw.last_tag = 0; event->destroy = paiext_event_destroy; if (a->sample_period) { -- cgit v1.2.3 From 673752a839694133a328610fcbc54f3d59ae87f3 Mon Sep 17 00:00:00 2001 From: Mikhail Zaslonko Date: Wed, 8 Nov 2023 18:18:52 +0100 Subject: s390/ipl: add missing IPL_TYPE_ECKD_DUMP case to ipl_init() Add missing IPL_TYPE_ECKD_DUMP case to ipl_init() creating ECKD ipl device attribute group similar to IPL_TYPE_ECKD case. Commit e2d2a2968f2a ("s390/ipl: add eckd dump support") should have had it from the beginning. Fixes: e2d2a2968f2a ("s390/ipl: add eckd dump support") Signed-off-by: Mikhail Zaslonko Reviewed-by: Sven Schnelle Signed-off-by: Alexander Gordeev --- arch/s390/kernel/ipl.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/s390/kernel/ipl.c b/arch/s390/kernel/ipl.c index cc364fce6aa9..ba75f6bee774 100644 --- a/arch/s390/kernel/ipl.c +++ b/arch/s390/kernel/ipl.c @@ -666,6 +666,7 @@ static int __init ipl_init(void) &ipl_ccw_attr_group_lpar); break; case IPL_TYPE_ECKD: + case IPL_TYPE_ECKD_DUMP: rc = sysfs_create_group(&ipl_kset->kobj, &ipl_eckd_attr_group); break; case IPL_TYPE_FCP: -- cgit v1.2.3 From 0a9ace1117bbaa25687468af703b472235f5c210 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Wed, 15 Nov 2023 11:39:02 +0100 Subject: s390: remove odd comment In the meantime hopefully most people got used to forward declarations, therefore remove the explanation. Signed-off-by: Heiko Carstens Signed-off-by: Alexander Gordeev --- arch/s390/include/asm/processor.h | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/s390/include/asm/processor.h b/arch/s390/include/asm/processor.h index dc17896a001a..c15eadbb9983 100644 --- a/arch/s390/include/asm/processor.h +++ b/arch/s390/include/asm/processor.h @@ -228,7 +228,6 @@ typedef struct thread_struct thread_struct; execve_tail(); \ } while (0) -/* Forward declaration, a strange C thing */ struct task_struct; struct mm_struct; struct seq_file; -- cgit v1.2.3 From 732c678eb021dbc514a699be1815e194692fdd5c Mon Sep 17 00:00:00 2001 From: Richard Fitzgerald Date: Tue, 21 Nov 2023 15:44:19 +0000 Subject: ALSA: hda: cs35l56: Enable low-power hibernation mode on SPI SPI hibernation is now supported with the latest hibernation/wake sequences in the shared ASoC code. This has a functional dependency on two commits: commit 3df761bdbc8b ("ASoC: cs35l56: Wake transactions need to be issued twice") commit a47cf4dac7dc ("ASoC: cs35l56: Change hibernate sequence to use allow auto hibernate") To protect against this, enabling hibernation is conditional on CS35L56_WAKE_HOLD_TIME_US being defined, which indicates that the new hibernation sequences are available. Signed-off-by: Richard Fitzgerald Link: https://lore.kernel.org/r/20231121154419.19435-1-rf@opensource.cirrus.com Signed-off-by: Takashi Iwai --- sound/pci/hda/cs35l56_hda_spi.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/sound/pci/hda/cs35l56_hda_spi.c b/sound/pci/hda/cs35l56_hda_spi.c index 756aec342eab..27d7fbc56b4c 100644 --- a/sound/pci/hda/cs35l56_hda_spi.c +++ b/sound/pci/hda/cs35l56_hda_spi.c @@ -21,6 +21,10 @@ static int cs35l56_hda_spi_probe(struct spi_device *spi) return -ENOMEM; cs35l56->base.dev = &spi->dev; + +#ifdef CS35L56_WAKE_HOLD_TIME_US + cs35l56->base.can_hibernate = true; +#endif cs35l56->base.regmap = devm_regmap_init_spi(spi, &cs35l56_regmap_spi); if (IS_ERR(cs35l56->base.regmap)) { ret = PTR_ERR(cs35l56->base.regmap); -- cgit v1.2.3 From aab1f809d7540def24498e81347740a7239a74d5 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Mon, 20 Nov 2023 13:00:00 +0100 Subject: scripts/checkstack.pl: match all stack sizes for s390 For some unknown reason the regular expression for checkstack only matches three digit numbers starting with the number "3", or any higher number. Which means that it skips any stack sizes smaller than 304 bytes. This makes the checkstack script a bit less useful than it could be. Change the script to match any number. To be filtered out stack sizes can be configured with the min_stack variable, which omits any stack frame sizes smaller than 100 bytes by default. Tested-by: Alexander Gordeev Signed-off-by: Heiko Carstens Signed-off-by: Alexander Gordeev --- scripts/checkstack.pl | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/scripts/checkstack.pl b/scripts/checkstack.pl index 84f5fb7f1cec..d83ba5d8f3f4 100755 --- a/scripts/checkstack.pl +++ b/scripts/checkstack.pl @@ -97,8 +97,7 @@ my (@stack, $re, $dre, $sub, $x, $xs, $funcre, $min_stack); # 11160: a7 fb ff 60 aghi %r15,-160 # or # 100092: e3 f0 ff c8 ff 71 lay %r15,-56(%r15) - $re = qr/.*(?:lay|ag?hi).*\%r15,-(([0-9]{2}|[3-9])[0-9]{2}) - (?:\(\%r15\))?$/ox; + $re = qr/.*(?:lay|ag?hi).*\%r15,-([0-9]+)(?:\(\%r15\))?$/o; } elsif ($arch eq 'sparc' || $arch eq 'sparc64') { # f0019d10: 9d e3 bf 90 save %sp, -112, %sp $re = qr/.*save.*%sp, -(([0-9]{2}|[3-9])[0-9]{2}), %sp/o; -- cgit v1.2.3 From 695bfba7ca781dd41b5225148cc8cebd74c553c2 Mon Sep 17 00:00:00 2001 From: Lorenzo Bianconi Date: Mon, 13 Nov 2023 11:06:33 +0100 Subject: wifi: mt76: mt7925: fix typo in mt7925_init_he_caps Use iftype for interface type switch in mt7925_init_he_caps routine. This found during code review but later Coverity reported this with id 1549845. Fixes: c948b5da6bbe ("wifi: mt76: mt7925: add Mediatek Wi-Fi7 driver for mt7925 chips") Signed-off-by: Lorenzo Bianconi Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/7de6e939dc75ee08f05bf1ee73253aa7eeccf28e.1699869649.git.lorenzo@kernel.org --- drivers/net/wireless/mediatek/mt76/mt7925/main.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/mediatek/mt76/mt7925/main.c b/drivers/net/wireless/mediatek/mt76/mt7925/main.c index 15c2fb0bcb1b..aa918b9b0469 100644 --- a/drivers/net/wireless/mediatek/mt76/mt7925/main.c +++ b/drivers/net/wireless/mediatek/mt76/mt7925/main.c @@ -14,7 +14,7 @@ static void mt7925_init_he_caps(struct mt792x_phy *phy, enum nl80211_band band, struct ieee80211_sband_iftype_data *data, - enum nl80211_iftype iftype) + enum nl80211_iftype iftype) { struct ieee80211_sta_he_cap *he_cap = &data->he_cap; struct ieee80211_he_cap_elem *he_cap_elem = &he_cap->he_cap_elem; @@ -53,7 +53,7 @@ mt7925_init_he_caps(struct mt792x_phy *phy, enum nl80211_band band, IEEE80211_HE_PHY_CAP2_UL_MU_FULL_MU_MIMO | IEEE80211_HE_PHY_CAP2_UL_MU_PARTIAL_MU_MIMO; - switch (i) { + switch (iftype) { case NL80211_IFTYPE_AP: he_cap_elem->mac_cap_info[2] |= IEEE80211_HE_MAC_CAP2_BSR; -- cgit v1.2.3 From 3af755a46881c32fecaecfdeaf3a8f0a869deca5 Mon Sep 17 00:00:00 2001 From: Hannes Reinecke Date: Tue, 21 Nov 2023 09:01:03 +0100 Subject: nvme: move nvme_stop_keep_alive() back to original position Stopping keep-alive not only stops the keep-alive workqueue, but also needs to be synchronized with I/O termination as we must not send a keep-alive command after all I/O had been terminated. So to avoid any regressions move the call to stop_keep_alive() back to its original position and ensure that keep-alive is correctly stopped failing to setup the admin queue. Fixes: 4733b65d82bd ("nvme: start keep-alive after admin queue setup") Suggested-by: Sagi Grimberg Signed-off-by: Hannes Reinecke Reviewed-by: Sagi Grimberg Signed-off-by: Keith Busch --- drivers/nvme/host/core.c | 2 +- drivers/nvme/host/fc.c | 19 ++++++++----------- drivers/nvme/host/rdma.c | 1 + drivers/nvme/host/tcp.c | 1 + 4 files changed, 11 insertions(+), 12 deletions(-) diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c index fd28e6b6574c..46a4c9c5ea96 100644 --- a/drivers/nvme/host/core.c +++ b/drivers/nvme/host/core.c @@ -482,7 +482,6 @@ EXPORT_SYMBOL_GPL(nvme_cancel_tagset); void nvme_cancel_admin_tagset(struct nvme_ctrl *ctrl) { - nvme_stop_keep_alive(ctrl); if (ctrl->admin_tagset) { blk_mq_tagset_busy_iter(ctrl->admin_tagset, nvme_cancel_request, ctrl); @@ -4355,6 +4354,7 @@ void nvme_stop_ctrl(struct nvme_ctrl *ctrl) { nvme_mpath_stop(ctrl); nvme_auth_stop(ctrl); + nvme_stop_keep_alive(ctrl); nvme_stop_failfast_work(ctrl); flush_work(&ctrl->async_event_work); cancel_work_sync(&ctrl->fw_act_work); diff --git a/drivers/nvme/host/fc.c b/drivers/nvme/host/fc.c index 49c3e46eaa1e..9f9a3b35dc64 100644 --- a/drivers/nvme/host/fc.c +++ b/drivers/nvme/host/fc.c @@ -2530,12 +2530,6 @@ __nvme_fc_abort_outstanding_ios(struct nvme_fc_ctrl *ctrl, bool start_queues) * clean up the admin queue. Same thing as above. */ nvme_quiesce_admin_queue(&ctrl->ctrl); - - /* - * Open-coding nvme_cancel_admin_tagset() as fc - * is not using nvme_cancel_request(). - */ - nvme_stop_keep_alive(&ctrl->ctrl); blk_sync_queue(ctrl->ctrl.admin_q); blk_mq_tagset_busy_iter(&ctrl->admin_tag_set, nvme_fc_terminate_exchange, &ctrl->ctrl); @@ -3138,11 +3132,12 @@ nvme_fc_create_association(struct nvme_fc_ctrl *ctrl) nvme_unquiesce_admin_queue(&ctrl->ctrl); ret = nvme_init_ctrl_finish(&ctrl->ctrl, false); - if (!ret && test_bit(ASSOC_FAILED, &ctrl->flags)) - ret = -EIO; if (ret) goto out_disconnect_admin_queue; - + if (test_bit(ASSOC_FAILED, &ctrl->flags)) { + ret = -EIO; + goto out_stop_keep_alive; + } /* sanity checks */ /* FC-NVME does not have other data in the capsule */ @@ -3150,7 +3145,7 @@ nvme_fc_create_association(struct nvme_fc_ctrl *ctrl) dev_err(ctrl->ctrl.device, "icdoff %d is not supported!\n", ctrl->ctrl.icdoff); ret = NVME_SC_INVALID_FIELD | NVME_SC_DNR; - goto out_disconnect_admin_queue; + goto out_stop_keep_alive; } /* FC-NVME supports normal SGL Data Block Descriptors */ @@ -3158,7 +3153,7 @@ nvme_fc_create_association(struct nvme_fc_ctrl *ctrl) dev_err(ctrl->ctrl.device, "Mandatory sgls are not supported!\n"); ret = NVME_SC_INVALID_FIELD | NVME_SC_DNR; - goto out_disconnect_admin_queue; + goto out_stop_keep_alive; } if (opts->queue_size > ctrl->ctrl.maxcmd) { @@ -3205,6 +3200,8 @@ nvme_fc_create_association(struct nvme_fc_ctrl *ctrl) out_term_aen_ops: nvme_fc_term_aen_ops(ctrl); +out_stop_keep_alive: + nvme_stop_keep_alive(&ctrl->ctrl); out_disconnect_admin_queue: dev_warn(ctrl->ctrl.device, "NVME-FC{%d}: create_assoc failed, assoc_id %llx ret %d\n", diff --git a/drivers/nvme/host/rdma.c b/drivers/nvme/host/rdma.c index a7fea4cbacd7..6d178d555920 100644 --- a/drivers/nvme/host/rdma.c +++ b/drivers/nvme/host/rdma.c @@ -1080,6 +1080,7 @@ destroy_io: nvme_rdma_free_io_queues(ctrl); } destroy_admin: + nvme_stop_keep_alive(&ctrl->ctrl); nvme_quiesce_admin_queue(&ctrl->ctrl); blk_sync_queue(ctrl->ctrl.admin_q); nvme_rdma_stop_queue(&ctrl->queues[0]); diff --git a/drivers/nvme/host/tcp.c b/drivers/nvme/host/tcp.c index 6ed794815517..ddcd23fb8b75 100644 --- a/drivers/nvme/host/tcp.c +++ b/drivers/nvme/host/tcp.c @@ -2237,6 +2237,7 @@ destroy_io: nvme_tcp_destroy_io_queues(ctrl, new); } destroy_admin: + nvme_stop_keep_alive(ctrl); nvme_tcp_teardown_admin_queue(ctrl, false); return ret; } -- cgit v1.2.3 From 4a6c5607d4502ccd1b15b57d57f17d12b6f257a7 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 21 Nov 2023 11:39:36 -1000 Subject: workqueue: Make sure that wq_unbound_cpumask is never empty During boot, depending on how the housekeeping and workqueue.unbound_cpus masks are set, wq_unbound_cpumask can end up empty. Since 8639ecebc9b1 ("workqueue: Implement non-strict affinity scope for unbound workqueues"), this may end up feeding -1 as a CPU number into scheduler leading to oopses. BUG: unable to handle page fault for address: ffffffff8305e9c0 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page ... Call Trace: select_idle_sibling+0x79/0xaf0 select_task_rq_fair+0x1cb/0x7b0 try_to_wake_up+0x29c/0x5c0 wake_up_process+0x19/0x20 kick_pool+0x5e/0xb0 __queue_work+0x119/0x430 queue_work_on+0x29/0x30 ... An empty wq_unbound_cpumask is a clear misconfiguration and already disallowed once system is booted up. Let's warn on and ignore unbound_cpumask restrictions which lead to no unbound cpus. While at it, also remove now unncessary empty check on wq_unbound_cpumask in wq_select_unbound_cpu(). Signed-off-by: Tejun Heo Reported-and-Tested-by: Yong He Link: http://lkml.kernel.org/r/20231120121623.119780-1-alexyonghe@tencent.com Fixes: 8639ecebc9b1 ("workqueue: Implement non-strict affinity scope for unbound workqueues") Cc: stable@vger.kernel.org # v6.6+ Reviewed-by: Waiman Long --- kernel/workqueue.c | 22 +++++++++++++++------- 1 file changed, 15 insertions(+), 7 deletions(-) diff --git a/kernel/workqueue.c b/kernel/workqueue.c index 6e578f576a6f..2989b57e154a 100644 --- a/kernel/workqueue.c +++ b/kernel/workqueue.c @@ -1684,9 +1684,6 @@ static int wq_select_unbound_cpu(int cpu) pr_warn_once("workqueue: round-robin CPU selection forced, expect performance impact\n"); } - if (cpumask_empty(wq_unbound_cpumask)) - return cpu; - new_cpu = __this_cpu_read(wq_rr_cpu_last); new_cpu = cpumask_next_and(new_cpu, wq_unbound_cpumask, cpu_online_mask); if (unlikely(new_cpu >= nr_cpu_ids)) { @@ -6515,6 +6512,17 @@ static inline void wq_watchdog_init(void) { } #endif /* CONFIG_WQ_WATCHDOG */ +static void __init restrict_unbound_cpumask(const char *name, const struct cpumask *mask) +{ + if (!cpumask_intersects(wq_unbound_cpumask, mask)) { + pr_warn("workqueue: Restricting unbound_cpumask (%*pb) with %s (%*pb) leaves no CPU, ignoring\n", + cpumask_pr_args(wq_unbound_cpumask), name, cpumask_pr_args(mask)); + return; + } + + cpumask_and(wq_unbound_cpumask, wq_unbound_cpumask, mask); +} + /** * workqueue_init_early - early init for workqueue subsystem * @@ -6534,11 +6542,11 @@ void __init workqueue_init_early(void) BUILD_BUG_ON(__alignof__(struct pool_workqueue) < __alignof__(long long)); BUG_ON(!alloc_cpumask_var(&wq_unbound_cpumask, GFP_KERNEL)); - cpumask_copy(wq_unbound_cpumask, housekeeping_cpumask(HK_TYPE_WQ)); - cpumask_and(wq_unbound_cpumask, wq_unbound_cpumask, housekeeping_cpumask(HK_TYPE_DOMAIN)); - + cpumask_copy(wq_unbound_cpumask, cpu_possible_mask); + restrict_unbound_cpumask("HK_TYPE_WQ", housekeeping_cpumask(HK_TYPE_WQ)); + restrict_unbound_cpumask("HK_TYPE_DOMAIN", housekeeping_cpumask(HK_TYPE_DOMAIN)); if (!cpumask_empty(&wq_cmdline_cpumask)) - cpumask_and(wq_unbound_cpumask, wq_unbound_cpumask, &wq_cmdline_cpumask); + restrict_unbound_cpumask("workqueue.unbound_cpus", &wq_cmdline_cpumask); pwq_cache = KMEM_CACHE(pool_workqueue, SLAB_PANIC); -- cgit v1.2.3 From cdba4301adda7c60a2064bf808e48fccd352aaa9 Mon Sep 17 00:00:00 2001 From: Shuming Fan Date: Wed, 22 Nov 2023 18:01:23 +0800 Subject: ASoC: rt5650: add mutex to avoid the jack detection failure This patch adds the jd_mutex to protect the jack detection control flow. And only the headset type could check the button status. Signed-off-by: Shuming Fan Link: https://lore.kernel.org/r/20231122100123.2831753-1-shumingf@realtek.com Signed-off-by: Mark Brown --- sound/soc/codecs/rt5645.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/sound/soc/codecs/rt5645.c b/sound/soc/codecs/rt5645.c index 7938b52d741d..a0d01d71d8b5 100644 --- a/sound/soc/codecs/rt5645.c +++ b/sound/soc/codecs/rt5645.c @@ -448,6 +448,7 @@ struct rt5645_priv { struct regulator_bulk_data supplies[ARRAY_SIZE(rt5645_supply_names)]; struct rt5645_eq_param_s *eq_param; struct timer_list btn_check_timer; + struct mutex jd_mutex; int codec_type; int sysclk; @@ -3193,6 +3194,8 @@ static int rt5645_jack_detect(struct snd_soc_component *component, int jack_inse rt5645_enable_push_button_irq(component, true); } } else { + if (rt5645->en_button_func) + rt5645_enable_push_button_irq(component, false); snd_soc_dapm_disable_pin(dapm, "Mic Det Power"); snd_soc_dapm_sync(dapm); rt5645->jack_type = SND_JACK_HEADPHONE; @@ -3295,6 +3298,8 @@ static void rt5645_jack_detect_work(struct work_struct *work) if (!rt5645->component) return; + mutex_lock(&rt5645->jd_mutex); + switch (rt5645->pdata.jd_mode) { case 0: /* Not using rt5645 JD */ if (rt5645->gpiod_hp_det) { @@ -3321,7 +3326,7 @@ static void rt5645_jack_detect_work(struct work_struct *work) if (!val && (rt5645->jack_type == 0)) { /* jack in */ report = rt5645_jack_detect(rt5645->component, 1); - } else if (!val && rt5645->jack_type != 0) { + } else if (!val && rt5645->jack_type == SND_JACK_HEADSET) { /* for push button and jack out */ btn_type = 0; if (snd_soc_component_read(rt5645->component, RT5645_INT_IRQ_ST) & 0x4) { @@ -3377,6 +3382,8 @@ static void rt5645_jack_detect_work(struct work_struct *work) rt5645_jack_detect(rt5645->component, 0); } + mutex_unlock(&rt5645->jd_mutex); + snd_soc_jack_report(rt5645->hp_jack, report, SND_JACK_HEADPHONE); snd_soc_jack_report(rt5645->mic_jack, report, SND_JACK_MICROPHONE); if (rt5645->en_button_func) @@ -4150,6 +4157,7 @@ static int rt5645_i2c_probe(struct i2c_client *i2c) } timer_setup(&rt5645->btn_check_timer, rt5645_btn_check_callback, 0); + mutex_init(&rt5645->jd_mutex); INIT_DELAYED_WORK(&rt5645->jack_detect_work, rt5645_jack_detect_work); INIT_DELAYED_WORK(&rt5645->rcclock_work, rt5645_rcclock_work); -- cgit v1.2.3 From 125b0bb95dd6bec81b806b997a4ccb026eeecf8f Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Thu, 9 Nov 2023 22:22:13 -0800 Subject: asm-generic: qspinlock: fix queued_spin_value_unlocked() implementation We really don't want to do atomic_read() or anything like that, since we already have the value, not the lock. The whole point of this is that we've loaded the lock from memory, and we want to check whether the value we loaded was a locked one or not. The main use of this is the lockref code, which loads both the lock and the reference count in one atomic operation, and then works on that combined value. With the atomic_read(), the compiler would pointlessly spill the value to the stack, in order to then be able to read it back "atomically". This is the qspinlock version of commit c6f4a9002252 ("asm-generic: ticket-lock: Optimize arch_spin_value_unlocked()") which fixed this same bug for ticket locks. Cc: Guo Ren Cc: Ingo Molnar Cc: Waiman Long Link: https://lore.kernel.org/all/CAHk-=whNRv0v6kQiV5QO6DJhjH4KEL36vWQ6Re8Csrnh4zbRkQ@mail.gmail.com/ Signed-off-by: Linus Torvalds --- include/asm-generic/qspinlock.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/asm-generic/qspinlock.h b/include/asm-generic/qspinlock.h index 995513fa2690..0655aa5b57b2 100644 --- a/include/asm-generic/qspinlock.h +++ b/include/asm-generic/qspinlock.h @@ -70,7 +70,7 @@ static __always_inline int queued_spin_is_locked(struct qspinlock *lock) */ static __always_inline int queued_spin_value_unlocked(struct qspinlock lock) { - return !atomic_read(&lock.val); + return !lock.val.counter; } /** -- cgit v1.2.3 From ed17f7da5f0c8b65b7b5f7c98beb0aadbc0546ee Mon Sep 17 00:00:00 2001 From: "Darrick J. Wong" Date: Mon, 20 Nov 2023 10:31:38 -0800 Subject: xfs: clean up dqblk extraction Since the introduction of xfs_dqblk in V5, xfs really ought to find the dqblk pointer from the dquot buffer, then compute the xfs_disk_dquot pointer from the dqblk pointer. Fix the open-coded xfs_buf_offset calls and do the type checking in the correct order. Note that this has made no practical difference since the start of the xfs_disk_dquot is coincident with the start of the xfs_dqblk. Signed-off-by: Darrick J. Wong Reviewed-by: Christoph Hellwig Signed-off-by: Chandan Babu R --- fs/xfs/xfs_dquot.c | 5 +++-- fs/xfs/xfs_dquot_item_recover.c | 7 ++++--- 2 files changed, 7 insertions(+), 5 deletions(-) diff --git a/fs/xfs/xfs_dquot.c b/fs/xfs/xfs_dquot.c index ac6ba646624d..a013b87ab8d5 100644 --- a/fs/xfs/xfs_dquot.c +++ b/fs/xfs/xfs_dquot.c @@ -562,7 +562,8 @@ xfs_dquot_from_disk( struct xfs_dquot *dqp, struct xfs_buf *bp) { - struct xfs_disk_dquot *ddqp = bp->b_addr + dqp->q_bufoffset; + struct xfs_dqblk *dqb = xfs_buf_offset(bp, dqp->q_bufoffset); + struct xfs_disk_dquot *ddqp = &dqb->dd_diskdq; /* * Ensure that we got the type and ID we were looking for. @@ -1250,7 +1251,7 @@ xfs_qm_dqflush( } /* Flush the incore dquot to the ondisk buffer. */ - dqblk = bp->b_addr + dqp->q_bufoffset; + dqblk = xfs_buf_offset(bp, dqp->q_bufoffset); xfs_dquot_to_disk(&dqblk->dd_diskdq, dqp); /* diff --git a/fs/xfs/xfs_dquot_item_recover.c b/fs/xfs/xfs_dquot_item_recover.c index 8966ba842395..db2cb5e4197b 100644 --- a/fs/xfs/xfs_dquot_item_recover.c +++ b/fs/xfs/xfs_dquot_item_recover.c @@ -65,6 +65,7 @@ xlog_recover_dquot_commit_pass2( { struct xfs_mount *mp = log->l_mp; struct xfs_buf *bp; + struct xfs_dqblk *dqb; struct xfs_disk_dquot *ddq, *recddq; struct xfs_dq_logformat *dq_f; xfs_failaddr_t fa; @@ -130,14 +131,14 @@ xlog_recover_dquot_commit_pass2( return error; ASSERT(bp); - ddq = xfs_buf_offset(bp, dq_f->qlf_boffset); + dqb = xfs_buf_offset(bp, dq_f->qlf_boffset); + ddq = &dqb->dd_diskdq; /* * If the dquot has an LSN in it, recover the dquot only if it's less * than the lsn of the transaction we are replaying. */ if (xfs_has_crc(mp)) { - struct xfs_dqblk *dqb = (struct xfs_dqblk *)ddq; xfs_lsn_t lsn = be64_to_cpu(dqb->dd_lsn); if (lsn && lsn != -1 && XFS_LSN_CMP(lsn, current_lsn) >= 0) { @@ -147,7 +148,7 @@ xlog_recover_dquot_commit_pass2( memcpy(ddq, recddq, item->ri_buf[1].i_len); if (xfs_has_crc(mp)) { - xfs_update_cksum((char *)ddq, sizeof(struct xfs_dqblk), + xfs_update_cksum((char *)dqb, sizeof(struct xfs_dqblk), XFS_DQUOT_CRC_OFF); } -- cgit v1.2.3 From 9c235dfc3d3f901fe22acb20f2ab37ff39f2ce02 Mon Sep 17 00:00:00 2001 From: "Darrick J. Wong" Date: Mon, 20 Nov 2023 10:31:44 -0800 Subject: xfs: dquot recovery does not validate the recovered dquot When we're recovering ondisk quota records from the log, we need to validate the recovered buffer contents before writing them to disk. Signed-off-by: Darrick J. Wong Reviewed-by: Christoph Hellwig Signed-off-by: Chandan Babu R --- fs/xfs/xfs_dquot_item_recover.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/fs/xfs/xfs_dquot_item_recover.c b/fs/xfs/xfs_dquot_item_recover.c index db2cb5e4197b..2c2720ce6923 100644 --- a/fs/xfs/xfs_dquot_item_recover.c +++ b/fs/xfs/xfs_dquot_item_recover.c @@ -19,6 +19,7 @@ #include "xfs_log.h" #include "xfs_log_priv.h" #include "xfs_log_recover.h" +#include "xfs_error.h" STATIC void xlog_recover_dquot_ra_pass2( @@ -152,6 +153,19 @@ xlog_recover_dquot_commit_pass2( XFS_DQUOT_CRC_OFF); } + /* Validate the recovered dquot. */ + fa = xfs_dqblk_verify(log->l_mp, dqb, dq_f->qlf_id); + if (fa) { + XFS_CORRUPTION_ERROR("Bad dquot after recovery", + XFS_ERRLEVEL_LOW, mp, dqb, + sizeof(struct xfs_dqblk)); + xfs_alert(mp, + "Metadata corruption detected at %pS, dquot 0x%x", + fa, dq_f->qlf_id); + error = -EFSCORRUPTED; + goto out_release; + } + ASSERT(dq_f->qlf_size == 2); ASSERT(bp->b_mount == mp); bp->b_flags |= _XBF_LOGRECOVERY; -- cgit v1.2.3 From acfa60dbe03802d6afd28401aa47801270e82021 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Fri, 17 Nov 2023 13:14:22 +0000 Subject: arm64: mm: Fix "rodata=on" when CONFIG_RODATA_FULL_DEFAULT_ENABLED=y When CONFIG_RODATA_FULL_DEFAULT_ENABLED=y, passing "rodata=on" on the kernel command-line (rather than "rodata=full") should turn off the "full" behaviour, leaving writable linear aliases of read-only kernel memory. Unfortunately, the option has no effect in this situation and the only way to disable the "rodata=full" behaviour is to disable rodata protection entirely by passing "rodata=off". Fix this by parsing the "on" and "off" options in the arch code, additionally enforcing that 'rodata_full' cannot be set without also setting 'rodata_enabled', allowing us to simplify a couple of checks in the process. Fixes: 2e8cff0a0eee ("arm64: fix rodata=full") Cc: Ard Biesheuvel Cc: Mark Rutland Signed-off-by: Will Deacon Reviewed-by: "Russell King (Oracle)" Reviewed-by: Ard Biesheuvel Link: https://lore.kernel.org/r/20231117131422.29663-1-will@kernel.org Signed-off-by: Catalin Marinas --- arch/arm64/include/asm/setup.h | 17 +++++++++++++++-- arch/arm64/mm/pageattr.c | 7 +++---- 2 files changed, 18 insertions(+), 6 deletions(-) diff --git a/arch/arm64/include/asm/setup.h b/arch/arm64/include/asm/setup.h index f4af547ef54c..2e4d7da74fb8 100644 --- a/arch/arm64/include/asm/setup.h +++ b/arch/arm64/include/asm/setup.h @@ -21,9 +21,22 @@ static inline bool arch_parse_debug_rodata(char *arg) extern bool rodata_enabled; extern bool rodata_full; - if (arg && !strcmp(arg, "full")) { + if (!arg) + return false; + + if (!strcmp(arg, "full")) { + rodata_enabled = rodata_full = true; + return true; + } + + if (!strcmp(arg, "off")) { + rodata_enabled = rodata_full = false; + return true; + } + + if (!strcmp(arg, "on")) { rodata_enabled = true; - rodata_full = true; + rodata_full = false; return true; } diff --git a/arch/arm64/mm/pageattr.c b/arch/arm64/mm/pageattr.c index 8e2017ba5f1b..924843f1f661 100644 --- a/arch/arm64/mm/pageattr.c +++ b/arch/arm64/mm/pageattr.c @@ -29,8 +29,8 @@ bool can_set_direct_map(void) * * KFENCE pool requires page-granular mapping if initialized late. */ - return (rodata_enabled && rodata_full) || debug_pagealloc_enabled() || - arm64_kfence_can_set_direct_map(); + return rodata_full || debug_pagealloc_enabled() || + arm64_kfence_can_set_direct_map(); } static int change_page_range(pte_t *ptep, unsigned long addr, void *data) @@ -105,8 +105,7 @@ static int change_memory_common(unsigned long addr, int numpages, * If we are manipulating read-only permissions, apply the same * change to the linear mapping of the pages that back this VM area. */ - if (rodata_enabled && - rodata_full && (pgprot_val(set_mask) == PTE_RDONLY || + if (rodata_full && (pgprot_val(set_mask) == PTE_RDONLY || pgprot_val(clear_mask) == PTE_RDONLY)) { for (i = 0; i < area->nr_pages; i++) { __change_memory_common((u64)page_address(area->pages[i]), -- cgit v1.2.3 From 1041dfe6109fcb24e9a3d5d4ca9218e64dc0ed29 Mon Sep 17 00:00:00 2001 From: Namhyung Kim Date: Tue, 21 Nov 2023 14:56:36 -0800 Subject: tools headers UAPI: Update tools's copy of drm headers tldr; Just FYI, I'm carrying this on the perf tools tree. Full explanation: There used to be no copies, with tools/ code using kernel headers directly. From time to time tools/perf/ broke due to legitimate kernel hacking. At some point Linus complained about such direct usage. Then we adopted the current model. The way these headers are used in perf are not restricted to just including them to compile something. There are sometimes used in scripts that convert defines into string tables, etc, so some change may break one of these scripts, or new MSRs may use some different #define pattern, etc. E.g.: $ ls -1 tools/perf/trace/beauty/*.sh | head -5 tools/perf/trace/beauty/arch_errno_names.sh tools/perf/trace/beauty/drm_ioctl.sh tools/perf/trace/beauty/fadvise.sh tools/perf/trace/beauty/fsconfig.sh tools/perf/trace/beauty/fsmount.sh $ $ tools/perf/trace/beauty/fadvise.sh static const char *fadvise_advices[] = { [0] = "NORMAL", [1] = "RANDOM", [2] = "SEQUENTIAL", [3] = "WILLNEED", [4] = "DONTNEED", [5] = "NOREUSE", }; $ The tools/perf/check-headers.sh script, part of the tools/ build process, points out changes in the original files. So its important not to touch the copies in tools/ when doing changes in the original kernel headers, that will be done later, when check-headers.sh inform about the change to the perf tools hackers. Cc: David Airlie Cc: Daniel Vetter Cc: Maarten Lankhorst Cc: Maxime Ripard Cc: Thomas Zimmermann Cc: dri-devel@lists.freedesktop.org Signed-off-by: Namhyung Kim Link: https://lore.kernel.org/r/20231121225650.390246-1-namhyung@kernel.org --- tools/include/uapi/drm/drm.h | 20 ++++++++++++++++++++ tools/include/uapi/drm/i915_drm.h | 8 ++++---- 2 files changed, 24 insertions(+), 4 deletions(-) diff --git a/tools/include/uapi/drm/drm.h b/tools/include/uapi/drm/drm.h index 794c1d857677..de723566c5ae 100644 --- a/tools/include/uapi/drm/drm.h +++ b/tools/include/uapi/drm/drm.h @@ -1134,6 +1134,26 @@ extern "C" { #define DRM_IOCTL_MODE_PAGE_FLIP DRM_IOWR(0xB0, struct drm_mode_crtc_page_flip) #define DRM_IOCTL_MODE_DIRTYFB DRM_IOWR(0xB1, struct drm_mode_fb_dirty_cmd) +/** + * DRM_IOCTL_MODE_CREATE_DUMB - Create a new dumb buffer object. + * + * KMS dumb buffers provide a very primitive way to allocate a buffer object + * suitable for scanout and map it for software rendering. KMS dumb buffers are + * not suitable for hardware-accelerated rendering nor video decoding. KMS dumb + * buffers are not suitable to be displayed on any other device than the KMS + * device where they were allocated from. Also see + * :ref:`kms_dumb_buffer_objects`. + * + * The IOCTL argument is a struct drm_mode_create_dumb. + * + * User-space is expected to create a KMS dumb buffer via this IOCTL, then add + * it as a KMS framebuffer via &DRM_IOCTL_MODE_ADDFB and map it via + * &DRM_IOCTL_MODE_MAP_DUMB. + * + * &DRM_CAP_DUMB_BUFFER indicates whether this IOCTL is supported. + * &DRM_CAP_DUMB_PREFERRED_DEPTH and &DRM_CAP_DUMB_PREFER_SHADOW indicate + * driver preferences for dumb buffers. + */ #define DRM_IOCTL_MODE_CREATE_DUMB DRM_IOWR(0xB2, struct drm_mode_create_dumb) #define DRM_IOCTL_MODE_MAP_DUMB DRM_IOWR(0xB3, struct drm_mode_map_dumb) #define DRM_IOCTL_MODE_DESTROY_DUMB DRM_IOWR(0xB4, struct drm_mode_destroy_dumb) diff --git a/tools/include/uapi/drm/i915_drm.h b/tools/include/uapi/drm/i915_drm.h index 7000e5910a1d..218edb0a96f8 100644 --- a/tools/include/uapi/drm/i915_drm.h +++ b/tools/include/uapi/drm/i915_drm.h @@ -38,13 +38,13 @@ extern "C" { */ /** - * DOC: uevents generated by i915 on it's device node + * DOC: uevents generated by i915 on its device node * * I915_L3_PARITY_UEVENT - Generated when the driver receives a parity mismatch - * event from the gpu l3 cache. Additional information supplied is ROW, + * event from the GPU L3 cache. Additional information supplied is ROW, * BANK, SUBBANK, SLICE of the affected cacheline. Userspace should keep - * track of these events and if a specific cache-line seems to have a - * persistent error remap it with the l3 remapping tool supplied in + * track of these events, and if a specific cache-line seems to have a + * persistent error, remap it with the L3 remapping tool supplied in * intel-gpu-tools. The value supplied with the event is always 1. * * I915_ERROR_UEVENT - Generated upon error detection, currently only via -- cgit v1.2.3 From 111844666672347747585e24d6cebda640bd1284 Mon Sep 17 00:00:00 2001 From: Namhyung Kim Date: Tue, 21 Nov 2023 14:56:37 -0800 Subject: tools headers UAPI: Update tools's copy of fscrypt.h header tldr; Just FYI, I'm carrying this on the perf tools tree. Full explanation: There used to be no copies, with tools/ code using kernel headers directly. From time to time tools/perf/ broke due to legitimate kernel hacking. At some point Linus complained about such direct usage. Then we adopted the current model. The way these headers are used in perf are not restricted to just including them to compile something. There are sometimes used in scripts that convert defines into string tables, etc, so some change may break one of these scripts, or new MSRs may use some different #define pattern, etc. E.g.: $ ls -1 tools/perf/trace/beauty/*.sh | head -5 tools/perf/trace/beauty/arch_errno_names.sh tools/perf/trace/beauty/drm_ioctl.sh tools/perf/trace/beauty/fadvise.sh tools/perf/trace/beauty/fsconfig.sh tools/perf/trace/beauty/fsmount.sh $ $ tools/perf/trace/beauty/fadvise.sh static const char *fadvise_advices[] = { [0] = "NORMAL", [1] = "RANDOM", [2] = "SEQUENTIAL", [3] = "WILLNEED", [4] = "DONTNEED", [5] = "NOREUSE", }; $ The tools/perf/check-headers.sh script, part of the tools/ build process, points out changes in the original files. So its important not to touch the copies in tools/ when doing changes in the original kernel headers, that will be done later, when check-headers.sh inform about the change to the perf tools hackers. Cc: Eric Biggers Cc: "Theodore Y. Ts'o" Cc: Jaegeuk Kim Cc: linux-fscrypt@vger.kernel.org Signed-off-by: Namhyung Kim Link: https://lore.kernel.org/r/20231121225650.390246-2-namhyung@kernel.org --- tools/include/uapi/linux/fscrypt.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/tools/include/uapi/linux/fscrypt.h b/tools/include/uapi/linux/fscrypt.h index fd1fb0d5389d..7a8f4c290187 100644 --- a/tools/include/uapi/linux/fscrypt.h +++ b/tools/include/uapi/linux/fscrypt.h @@ -71,7 +71,8 @@ struct fscrypt_policy_v2 { __u8 contents_encryption_mode; __u8 filenames_encryption_mode; __u8 flags; - __u8 __reserved[4]; + __u8 log2_data_unit_size; + __u8 __reserved[3]; __u8 master_key_identifier[FSCRYPT_KEY_IDENTIFIER_SIZE]; }; -- cgit v1.2.3 From 5a9f95b67059dda160f65ab41c48587103b3b3a0 Mon Sep 17 00:00:00 2001 From: Namhyung Kim Date: Tue, 21 Nov 2023 14:56:38 -0800 Subject: tools headers UAPI: Update tools's copy of kvm.h header tldr; Just FYI, I'm carrying this on the perf tools tree. Full explanation: There used to be no copies, with tools/ code using kernel headers directly. From time to time tools/perf/ broke due to legitimate kernel hacking. At some point Linus complained about such direct usage. Then we adopted the current model. The way these headers are used in perf are not restricted to just including them to compile something. There are sometimes used in scripts that convert defines into string tables, etc, so some change may break one of these scripts, or new MSRs may use some different #define pattern, etc. E.g.: $ ls -1 tools/perf/trace/beauty/*.sh | head -5 tools/perf/trace/beauty/arch_errno_names.sh tools/perf/trace/beauty/drm_ioctl.sh tools/perf/trace/beauty/fadvise.sh tools/perf/trace/beauty/fsconfig.sh tools/perf/trace/beauty/fsmount.sh $ $ tools/perf/trace/beauty/fadvise.sh static const char *fadvise_advices[] = { [0] = "NORMAL", [1] = "RANDOM", [2] = "SEQUENTIAL", [3] = "WILLNEED", [4] = "DONTNEED", [5] = "NOREUSE", }; $ The tools/perf/check-headers.sh script, part of the tools/ build process, points out changes in the original files. So its important not to touch the copies in tools/ when doing changes in the original kernel headers, that will be done later, when check-headers.sh inform about the change to the perf tools hackers. Cc: Paolo Bonzini Cc: kvm@vger.kernel.org Signed-off-by: Namhyung Kim Link: https://lore.kernel.org/r/20231121225650.390246-3-namhyung@kernel.org --- tools/include/uapi/linux/kvm.h | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) diff --git a/tools/include/uapi/linux/kvm.h b/tools/include/uapi/linux/kvm.h index f089ab290978..211b86de35ac 100644 --- a/tools/include/uapi/linux/kvm.h +++ b/tools/include/uapi/linux/kvm.h @@ -264,6 +264,7 @@ struct kvm_xen_exit { #define KVM_EXIT_RISCV_SBI 35 #define KVM_EXIT_RISCV_CSR 36 #define KVM_EXIT_NOTIFY 37 +#define KVM_EXIT_LOONGARCH_IOCSR 38 /* For KVM_EXIT_INTERNAL_ERROR */ /* Emulate instruction failed. */ @@ -336,6 +337,13 @@ struct kvm_run { __u32 len; __u8 is_write; } mmio; + /* KVM_EXIT_LOONGARCH_IOCSR */ + struct { + __u64 phys_addr; + __u8 data[8]; + __u32 len; + __u8 is_write; + } iocsr_io; /* KVM_EXIT_HYPERCALL */ struct { __u64 nr; @@ -1192,6 +1200,7 @@ struct kvm_ppc_resize_hpt { #define KVM_CAP_COUNTER_OFFSET 227 #define KVM_CAP_ARM_EAGER_SPLIT_CHUNK_SIZE 228 #define KVM_CAP_ARM_SUPPORTED_BLOCK_SIZES 229 +#define KVM_CAP_ARM_SUPPORTED_REG_MASK_RANGES 230 #ifdef KVM_CAP_IRQ_ROUTING @@ -1362,6 +1371,7 @@ struct kvm_dirty_tlb { #define KVM_REG_ARM64 0x6000000000000000ULL #define KVM_REG_MIPS 0x7000000000000000ULL #define KVM_REG_RISCV 0x8000000000000000ULL +#define KVM_REG_LOONGARCH 0x9000000000000000ULL #define KVM_REG_SIZE_SHIFT 52 #define KVM_REG_SIZE_MASK 0x00f0000000000000ULL @@ -1418,9 +1428,16 @@ struct kvm_device_attr { __u64 addr; /* userspace address of attr data */ }; -#define KVM_DEV_VFIO_GROUP 1 -#define KVM_DEV_VFIO_GROUP_ADD 1 -#define KVM_DEV_VFIO_GROUP_DEL 2 +#define KVM_DEV_VFIO_FILE 1 + +#define KVM_DEV_VFIO_FILE_ADD 1 +#define KVM_DEV_VFIO_FILE_DEL 2 + +/* KVM_DEV_VFIO_GROUP aliases are for compile time uapi compatibility */ +#define KVM_DEV_VFIO_GROUP KVM_DEV_VFIO_FILE + +#define KVM_DEV_VFIO_GROUP_ADD KVM_DEV_VFIO_FILE_ADD +#define KVM_DEV_VFIO_GROUP_DEL KVM_DEV_VFIO_FILE_DEL #define KVM_DEV_VFIO_GROUP_SET_SPAPR_TCE 3 enum kvm_device_type { @@ -1555,6 +1572,7 @@ struct kvm_s390_ucas_mapping { #define KVM_ARM_MTE_COPY_TAGS _IOR(KVMIO, 0xb4, struct kvm_arm_copy_mte_tags) /* Available with KVM_CAP_COUNTER_OFFSET */ #define KVM_ARM_SET_COUNTER_OFFSET _IOW(KVMIO, 0xb5, struct kvm_arm_counter_offset) +#define KVM_ARM_GET_REG_WRITABLE_MASKS _IOR(KVMIO, 0xb6, struct reg_mask_range) /* ioctl for vm fd */ #define KVM_CREATE_DEVICE _IOWR(KVMIO, 0xe0, struct kvm_create_device) -- cgit v1.2.3 From fb3648a6a87b674540f0ba7701a353006c408065 Mon Sep 17 00:00:00 2001 From: Namhyung Kim Date: Tue, 21 Nov 2023 14:56:39 -0800 Subject: tools headers UAPI: Update tools's copy of mount.h header tldr; Just FYI, I'm carrying this on the perf tools tree. Full explanation: There used to be no copies, with tools/ code using kernel headers directly. From time to time tools/perf/ broke due to legitimate kernel hacking. At some point Linus complained about such direct usage. Then we adopted the current model. The way these headers are used in perf are not restricted to just including them to compile something. There are sometimes used in scripts that convert defines into string tables, etc, so some change may break one of these scripts, or new MSRs may use some different #define pattern, etc. E.g.: $ ls -1 tools/perf/trace/beauty/*.sh | head -5 tools/perf/trace/beauty/arch_errno_names.sh tools/perf/trace/beauty/drm_ioctl.sh tools/perf/trace/beauty/fadvise.sh tools/perf/trace/beauty/fsconfig.sh tools/perf/trace/beauty/fsmount.sh $ $ tools/perf/trace/beauty/fadvise.sh static const char *fadvise_advices[] = { [0] = "NORMAL", [1] = "RANDOM", [2] = "SEQUENTIAL", [3] = "WILLNEED", [4] = "DONTNEED", [5] = "NOREUSE", }; $ The tools/perf/check-headers.sh script, part of the tools/ build process, points out changes in the original files. So its important not to touch the copies in tools/ when doing changes in the original kernel headers, that will be done later, when check-headers.sh inform about the change to the perf tools hackers. Cc: Alexander Viro Cc: Christian Brauner Cc: linux-fsdevel@vger.kernel.org Signed-off-by: Namhyung Kim Link: https://lore.kernel.org/r/20231121225650.390246-4-namhyung@kernel.org --- tools/include/uapi/linux/mount.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/tools/include/uapi/linux/mount.h b/tools/include/uapi/linux/mount.h index 8eb0d7b758d2..bb242fdcfe6b 100644 --- a/tools/include/uapi/linux/mount.h +++ b/tools/include/uapi/linux/mount.h @@ -100,8 +100,9 @@ enum fsconfig_command { FSCONFIG_SET_PATH = 3, /* Set parameter, supplying an object by path */ FSCONFIG_SET_PATH_EMPTY = 4, /* Set parameter, supplying an object by (empty) path */ FSCONFIG_SET_FD = 5, /* Set parameter, supplying an object by fd */ - FSCONFIG_CMD_CREATE = 6, /* Invoke superblock creation */ + FSCONFIG_CMD_CREATE = 6, /* Create new or reuse existing superblock */ FSCONFIG_CMD_RECONFIGURE = 7, /* Invoke superblock reconfiguration */ + FSCONFIG_CMD_CREATE_EXCL = 8, /* Create new superblock, fail if reusing existing superblock */ }; /* -- cgit v1.2.3 From daa97513415525e4d17c4978f3c47a7b7e935b36 Mon Sep 17 00:00:00 2001 From: Namhyung Kim Date: Tue, 21 Nov 2023 14:56:40 -0800 Subject: tools headers UAPI: Update tools's copy of vhost.h header tldr; Just FYI, I'm carrying this on the perf tools tree. Full explanation: There used to be no copies, with tools/ code using kernel headers directly. From time to time tools/perf/ broke due to legitimate kernel hacking. At some point Linus complained about such direct usage. Then we adopted the current model. The way these headers are used in perf are not restricted to just including them to compile something. There are sometimes used in scripts that convert defines into string tables, etc, so some change may break one of these scripts, or new MSRs may use some different #define pattern, etc. E.g.: $ ls -1 tools/perf/trace/beauty/*.sh | head -5 tools/perf/trace/beauty/arch_errno_names.sh tools/perf/trace/beauty/drm_ioctl.sh tools/perf/trace/beauty/fadvise.sh tools/perf/trace/beauty/fsconfig.sh tools/perf/trace/beauty/fsmount.sh $ $ tools/perf/trace/beauty/fadvise.sh static const char *fadvise_advices[] = { [0] = "NORMAL", [1] = "RANDOM", [2] = "SEQUENTIAL", [3] = "WILLNEED", [4] = "DONTNEED", [5] = "NOREUSE", }; $ The tools/perf/check-headers.sh script, part of the tools/ build process, points out changes in the original files. So its important not to touch the copies in tools/ when doing changes in the original kernel headers, that will be done later, when check-headers.sh inform about the change to the perf tools hackers. Cc: "Michael S. Tsirkin" Cc: Jason Wang Cc: kvm@vger.kernel.org Cc: virtualization@lists.linux.dev Cc: netdev@vger.kernel.org Signed-off-by: Namhyung Kim Link: https://lore.kernel.org/r/20231121225650.390246-5-namhyung@kernel.org --- tools/include/uapi/linux/vhost.h | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/tools/include/uapi/linux/vhost.h b/tools/include/uapi/linux/vhost.h index f5c48b61ab62..649560c685f1 100644 --- a/tools/include/uapi/linux/vhost.h +++ b/tools/include/uapi/linux/vhost.h @@ -219,4 +219,12 @@ */ #define VHOST_VDPA_RESUME _IO(VHOST_VIRTIO, 0x7E) +/* Get the group for the descriptor table including driver & device areas + * of a virtqueue: read index, write group in num. + * The virtqueue index is stored in the index field of vhost_vring_state. + * The group ID of the descriptor table for this specific virtqueue + * is returned via num field of vhost_vring_state. + */ +#define VHOST_VDPA_GET_VRING_DESC_GROUP _IOWR(VHOST_VIRTIO, 0x7F, \ + struct vhost_vring_state) #endif -- cgit v1.2.3 From 91c97b36bd6939a5c3c29de9e83e6359146c6939 Mon Sep 17 00:00:00 2001 From: Namhyung Kim Date: Tue, 21 Nov 2023 14:56:41 -0800 Subject: tools headers UAPI: Update tools's copy of unistd.h header tldr; Just FYI, I'm carrying this on the perf tools tree. Full explanation: There used to be no copies, with tools/ code using kernel headers directly. From time to time tools/perf/ broke due to legitimate kernel hacking. At some point Linus complained about such direct usage. Then we adopted the current model. The way these headers are used in perf are not restricted to just including them to compile something. There are sometimes used in scripts that convert defines into string tables, etc, so some change may break one of these scripts, or new MSRs may use some different #define pattern, etc. E.g.: $ ls -1 tools/perf/trace/beauty/*.sh | head -5 tools/perf/trace/beauty/arch_errno_names.sh tools/perf/trace/beauty/drm_ioctl.sh tools/perf/trace/beauty/fadvise.sh tools/perf/trace/beauty/fsconfig.sh tools/perf/trace/beauty/fsmount.sh $ $ tools/perf/trace/beauty/fadvise.sh static const char *fadvise_advices[] = { [0] = "NORMAL", [1] = "RANDOM", [2] = "SEQUENTIAL", [3] = "WILLNEED", [4] = "DONTNEED", [5] = "NOREUSE", }; $ The tools/perf/check-headers.sh script, part of the tools/ build process, points out changes in the original files. So its important not to touch the copies in tools/ when doing changes in the original kernel headers, that will be done later, when check-headers.sh inform about the change to the perf tools hackers. Cc: Arnd Bergmann Cc: linux-arch@vger.kernel.org Signed-off-by: Namhyung Kim Link: https://lore.kernel.org/r/20231121225650.390246-6-namhyung@kernel.org --- tools/include/uapi/asm-generic/unistd.h | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) diff --git a/tools/include/uapi/asm-generic/unistd.h b/tools/include/uapi/asm-generic/unistd.h index 76d946445391..756b013fb832 100644 --- a/tools/include/uapi/asm-generic/unistd.h +++ b/tools/include/uapi/asm-generic/unistd.h @@ -816,15 +816,21 @@ __SYSCALL(__NR_process_mrelease, sys_process_mrelease) __SYSCALL(__NR_futex_waitv, sys_futex_waitv) #define __NR_set_mempolicy_home_node 450 __SYSCALL(__NR_set_mempolicy_home_node, sys_set_mempolicy_home_node) - #define __NR_cachestat 451 __SYSCALL(__NR_cachestat, sys_cachestat) - #define __NR_fchmodat2 452 __SYSCALL(__NR_fchmodat2, sys_fchmodat2) +#define __NR_map_shadow_stack 453 +__SYSCALL(__NR_map_shadow_stack, sys_map_shadow_stack) +#define __NR_futex_wake 454 +__SYSCALL(__NR_futex_wake, sys_futex_wake) +#define __NR_futex_wait 455 +__SYSCALL(__NR_futex_wait, sys_futex_wait) +#define __NR_futex_requeue 456 +__SYSCALL(__NR_futex_requeue, sys_futex_requeue) #undef __NR_syscalls -#define __NR_syscalls 453 +#define __NR_syscalls 457 /* * 32 bit systems traditionally used different -- cgit v1.2.3 From fd2ddee727d1ae9296b3875087410cc3698885f0 Mon Sep 17 00:00:00 2001 From: Namhyung Kim Date: Tue, 21 Nov 2023 14:56:42 -0800 Subject: tools headers: Update tools's copy of socket.h header tldr; Just FYI, I'm carrying this on the perf tools tree. Full explanation: There used to be no copies, with tools/ code using kernel headers directly. From time to time tools/perf/ broke due to legitimate kernel hacking. At some point Linus complained about such direct usage. Then we adopted the current model. The way these headers are used in perf are not restricted to just including them to compile something. There are sometimes used in scripts that convert defines into string tables, etc, so some change may break one of these scripts, or new MSRs may use some different #define pattern, etc. E.g.: $ ls -1 tools/perf/trace/beauty/*.sh | head -5 tools/perf/trace/beauty/arch_errno_names.sh tools/perf/trace/beauty/drm_ioctl.sh tools/perf/trace/beauty/fadvise.sh tools/perf/trace/beauty/fsconfig.sh tools/perf/trace/beauty/fsmount.sh $ $ tools/perf/trace/beauty/fadvise.sh static const char *fadvise_advices[] = { [0] = "NORMAL", [1] = "RANDOM", [2] = "SEQUENTIAL", [3] = "WILLNEED", [4] = "DONTNEED", [5] = "NOREUSE", }; $ The tools/perf/check-headers.sh script, part of the tools/ build process, points out changes in the original files. So its important not to touch the copies in tools/ when doing changes in the original kernel headers, that will be done later, when check-headers.sh inform about the change to the perf tools hackers. Cc: netdev@vger.kernel.org Signed-off-by: Namhyung Kim Link: https://lore.kernel.org/r/20231121225650.390246-7-namhyung@kernel.org --- tools/perf/trace/beauty/include/linux/socket.h | 1 + 1 file changed, 1 insertion(+) diff --git a/tools/perf/trace/beauty/include/linux/socket.h b/tools/perf/trace/beauty/include/linux/socket.h index 39b74d83c7c4..cfcb7e2c3813 100644 --- a/tools/perf/trace/beauty/include/linux/socket.h +++ b/tools/perf/trace/beauty/include/linux/socket.h @@ -383,6 +383,7 @@ struct ucred { #define SOL_MPTCP 284 #define SOL_MCTP 285 #define SOL_SMC 286 +#define SOL_VSOCK 287 /* IPX options */ #define IPX_TYPE 1 -- cgit v1.2.3 From c23708f37652b74570409725e0bd70a81c275867 Mon Sep 17 00:00:00 2001 From: Namhyung Kim Date: Tue, 21 Nov 2023 14:56:43 -0800 Subject: tools headers: Update tools's copy of x86/asm headers tldr; Just FYI, I'm carrying this on the perf tools tree. Full explanation: There used to be no copies, with tools/ code using kernel headers directly. From time to time tools/perf/ broke due to legitimate kernel hacking. At some point Linus complained about such direct usage. Then we adopted the current model. The way these headers are used in perf are not restricted to just including them to compile something. There are sometimes used in scripts that convert defines into string tables, etc, so some change may break one of these scripts, or new MSRs may use some different #define pattern, etc. E.g.: $ ls -1 tools/perf/trace/beauty/*.sh | head -5 tools/perf/trace/beauty/arch_errno_names.sh tools/perf/trace/beauty/drm_ioctl.sh tools/perf/trace/beauty/fadvise.sh tools/perf/trace/beauty/fsconfig.sh tools/perf/trace/beauty/fsmount.sh $ $ tools/perf/trace/beauty/fadvise.sh static const char *fadvise_advices[] = { [0] = "NORMAL", [1] = "RANDOM", [2] = "SEQUENTIAL", [3] = "WILLNEED", [4] = "DONTNEED", [5] = "NOREUSE", }; $ The tools/perf/check-headers.sh script, part of the tools/ build process, points out changes in the original files. So its important not to touch the copies in tools/ when doing changes in the original kernel headers, that will be done later, when check-headers.sh inform about the change to the perf tools hackers. Cc: Thomas Gleixner Cc: Ingo Molnar Cc: Borislav Petkov Cc: Dave Hansen Cc: x86@kernel.org Cc: "H. Peter Anvin" Signed-off-by: Namhyung Kim Link: https://lore.kernel.org/r/20231121225650.390246-8-namhyung@kernel.org --- tools/arch/x86/include/asm/cpufeatures.h | 16 +++++++++++++++- tools/arch/x86/include/asm/disabled-features.h | 16 ++++++++++++++-- tools/arch/x86/include/asm/msr-index.h | 23 +++++++++++++++++++---- tools/arch/x86/include/uapi/asm/prctl.h | 12 ++++++++++++ 4 files changed, 60 insertions(+), 7 deletions(-) diff --git a/tools/arch/x86/include/asm/cpufeatures.h b/tools/arch/x86/include/asm/cpufeatures.h index 798e60b5454b..4af140cf5719 100644 --- a/tools/arch/x86/include/asm/cpufeatures.h +++ b/tools/arch/x86/include/asm/cpufeatures.h @@ -198,7 +198,6 @@ #define X86_FEATURE_CAT_L3 ( 7*32+ 4) /* Cache Allocation Technology L3 */ #define X86_FEATURE_CAT_L2 ( 7*32+ 5) /* Cache Allocation Technology L2 */ #define X86_FEATURE_CDP_L3 ( 7*32+ 6) /* Code and Data Prioritization L3 */ -#define X86_FEATURE_INVPCID_SINGLE ( 7*32+ 7) /* Effectively INVPCID && CR4.PCIDE=1 */ #define X86_FEATURE_HW_PSTATE ( 7*32+ 8) /* AMD HW-PState */ #define X86_FEATURE_PROC_FEEDBACK ( 7*32+ 9) /* AMD ProcFeedbackInterface */ #define X86_FEATURE_XCOMPACTED ( 7*32+10) /* "" Use compacted XSTATE (XSAVES or XSAVEC) */ @@ -308,6 +307,11 @@ #define X86_FEATURE_MSR_TSX_CTRL (11*32+20) /* "" MSR IA32_TSX_CTRL (Intel) implemented */ #define X86_FEATURE_SMBA (11*32+21) /* "" Slow Memory Bandwidth Allocation */ #define X86_FEATURE_BMEC (11*32+22) /* "" Bandwidth Monitoring Event Configuration */ +#define X86_FEATURE_USER_SHSTK (11*32+23) /* Shadow stack support for user mode applications */ + +#define X86_FEATURE_SRSO (11*32+24) /* "" AMD BTB untrain RETs */ +#define X86_FEATURE_SRSO_ALIAS (11*32+25) /* "" AMD BTB untrain RETs through aliasing */ +#define X86_FEATURE_IBPB_ON_VMEXIT (11*32+26) /* "" Issue an IBPB only on VMEXIT */ /* Intel-defined CPU features, CPUID level 0x00000007:1 (EAX), word 12 */ #define X86_FEATURE_AVX_VNNI (12*32+ 4) /* AVX VNNI instructions */ @@ -380,6 +384,7 @@ #define X86_FEATURE_OSPKE (16*32+ 4) /* OS Protection Keys Enable */ #define X86_FEATURE_WAITPKG (16*32+ 5) /* UMONITOR/UMWAIT/TPAUSE Instructions */ #define X86_FEATURE_AVX512_VBMI2 (16*32+ 6) /* Additional AVX512 Vector Bit Manipulation Instructions */ +#define X86_FEATURE_SHSTK (16*32+ 7) /* "" Shadow stack */ #define X86_FEATURE_GFNI (16*32+ 8) /* Galois Field New Instructions */ #define X86_FEATURE_VAES (16*32+ 9) /* Vector AES */ #define X86_FEATURE_VPCLMULQDQ (16*32+10) /* Carry-Less Multiplication Double Quadword */ @@ -438,11 +443,16 @@ /* AMD-defined Extended Feature 2 EAX, CPUID level 0x80000021 (EAX), word 20 */ #define X86_FEATURE_NO_NESTED_DATA_BP (20*32+ 0) /* "" No Nested Data Breakpoints */ +#define X86_FEATURE_WRMSR_XX_BASE_NS (20*32+ 1) /* "" WRMSR to {FS,GS,KERNEL_GS}_BASE is non-serializing */ #define X86_FEATURE_LFENCE_RDTSC (20*32+ 2) /* "" LFENCE always serializing / synchronizes RDTSC */ #define X86_FEATURE_NULL_SEL_CLR_BASE (20*32+ 6) /* "" Null Selector Clears Base */ #define X86_FEATURE_AUTOIBRS (20*32+ 8) /* "" Automatic IBRS */ #define X86_FEATURE_NO_SMM_CTL_MSR (20*32+ 9) /* "" SMM_CTL MSR is not present */ +#define X86_FEATURE_SBPB (20*32+27) /* "" Selective Branch Prediction Barrier */ +#define X86_FEATURE_IBPB_BRTYPE (20*32+28) /* "" MSR_PRED_CMD[IBPB] flushes all branch type predictions */ +#define X86_FEATURE_SRSO_NO (20*32+29) /* "" CPU is not affected by SRSO */ + /* * BUG word(s) */ @@ -484,5 +494,9 @@ #define X86_BUG_RETBLEED X86_BUG(27) /* CPU is affected by RETBleed */ #define X86_BUG_EIBRS_PBRSB X86_BUG(28) /* EIBRS is vulnerable to Post Barrier RSB Predictions */ #define X86_BUG_SMT_RSB X86_BUG(29) /* CPU is vulnerable to Cross-Thread Return Address Predictions */ +#define X86_BUG_GDS X86_BUG(30) /* CPU is affected by Gather Data Sampling */ +/* BUG word 2 */ +#define X86_BUG_SRSO X86_BUG(1*32 + 0) /* AMD SRSO bug */ +#define X86_BUG_DIV0 X86_BUG(1*32 + 1) /* AMD DIV0 speculation bug */ #endif /* _ASM_X86_CPUFEATURES_H */ diff --git a/tools/arch/x86/include/asm/disabled-features.h b/tools/arch/x86/include/asm/disabled-features.h index fafe9be7a6f4..702d93fdd10e 100644 --- a/tools/arch/x86/include/asm/disabled-features.h +++ b/tools/arch/x86/include/asm/disabled-features.h @@ -105,6 +105,18 @@ # define DISABLE_TDX_GUEST (1 << (X86_FEATURE_TDX_GUEST & 31)) #endif +#ifdef CONFIG_X86_USER_SHADOW_STACK +#define DISABLE_USER_SHSTK 0 +#else +#define DISABLE_USER_SHSTK (1 << (X86_FEATURE_USER_SHSTK & 31)) +#endif + +#ifdef CONFIG_X86_KERNEL_IBT +#define DISABLE_IBT 0 +#else +#define DISABLE_IBT (1 << (X86_FEATURE_IBT & 31)) +#endif + /* * Make sure to add features to the correct mask */ @@ -120,7 +132,7 @@ #define DISABLED_MASK9 (DISABLE_SGX) #define DISABLED_MASK10 0 #define DISABLED_MASK11 (DISABLE_RETPOLINE|DISABLE_RETHUNK|DISABLE_UNRET| \ - DISABLE_CALL_DEPTH_TRACKING) + DISABLE_CALL_DEPTH_TRACKING|DISABLE_USER_SHSTK) #define DISABLED_MASK12 (DISABLE_LAM) #define DISABLED_MASK13 0 #define DISABLED_MASK14 0 @@ -128,7 +140,7 @@ #define DISABLED_MASK16 (DISABLE_PKU|DISABLE_OSPKE|DISABLE_LA57|DISABLE_UMIP| \ DISABLE_ENQCMD) #define DISABLED_MASK17 0 -#define DISABLED_MASK18 0 +#define DISABLED_MASK18 (DISABLE_IBT) #define DISABLED_MASK19 0 #define DISABLED_MASK20 0 #define DISABLED_MASK_CHECK BUILD_BUG_ON_ZERO(NCAPINTS != 21) diff --git a/tools/arch/x86/include/asm/msr-index.h b/tools/arch/x86/include/asm/msr-index.h index 1d111350197f..1d51e1850ed0 100644 --- a/tools/arch/x86/include/asm/msr-index.h +++ b/tools/arch/x86/include/asm/msr-index.h @@ -222,6 +222,7 @@ #define MSR_INTEGRITY_CAPS_ARRAY_BIST BIT(MSR_INTEGRITY_CAPS_ARRAY_BIST_BIT) #define MSR_INTEGRITY_CAPS_PERIODIC_BIST_BIT 4 #define MSR_INTEGRITY_CAPS_PERIODIC_BIST BIT(MSR_INTEGRITY_CAPS_PERIODIC_BIST_BIT) +#define MSR_INTEGRITY_CAPS_SAF_GEN_MASK GENMASK_ULL(10, 9) #define MSR_LBR_NHM_FROM 0x00000680 #define MSR_LBR_NHM_TO 0x000006c0 @@ -553,6 +554,7 @@ #define MSR_AMD64_CPUID_FN_1 0xc0011004 #define MSR_AMD64_LS_CFG 0xc0011020 #define MSR_AMD64_DC_CFG 0xc0011022 +#define MSR_AMD64_TW_CFG 0xc0011023 #define MSR_AMD64_DE_CFG 0xc0011029 #define MSR_AMD64_DE_CFG_LFENCE_SERIALIZE_BIT 1 @@ -637,12 +639,21 @@ /* AMD Last Branch Record MSRs */ #define MSR_AMD64_LBR_SELECT 0xc000010e +/* Zen4 */ +#define MSR_ZEN4_BP_CFG 0xc001102e +#define MSR_ZEN4_BP_CFG_SHARED_BTB_FIX_BIT 5 + +/* Fam 19h MSRs */ +#define MSR_F19H_UMC_PERF_CTL 0xc0010800 +#define MSR_F19H_UMC_PERF_CTR 0xc0010801 + +/* Zen 2 */ +#define MSR_ZEN2_SPECTRAL_CHICKEN 0xc00110e3 +#define MSR_ZEN2_SPECTRAL_CHICKEN_BIT BIT_ULL(1) + /* Fam 17h MSRs */ #define MSR_F17H_IRPERF 0xc00000e9 -#define MSR_ZEN2_SPECTRAL_CHICKEN 0xc00110e3 -#define MSR_ZEN2_SPECTRAL_CHICKEN_BIT BIT_ULL(1) - /* Fam 16h MSRs */ #define MSR_F16H_L2I_PERF_CTL 0xc0010230 #define MSR_F16H_L2I_PERF_CTR 0xc0010231 @@ -1112,12 +1123,16 @@ #define MSR_IA32_VMX_MISC_INTEL_PT (1ULL << 14) #define MSR_IA32_VMX_MISC_VMWRITE_SHADOW_RO_FIELDS (1ULL << 29) #define MSR_IA32_VMX_MISC_PREEMPTION_TIMER_SCALE 0x1F -/* AMD-V MSRs */ +/* AMD-V MSRs */ #define MSR_VM_CR 0xc0010114 #define MSR_VM_IGNNE 0xc0010115 #define MSR_VM_HSAVE_PA 0xc0010117 +#define SVM_VM_CR_VALID_MASK 0x001fULL +#define SVM_VM_CR_SVM_LOCK_MASK 0x0008ULL +#define SVM_VM_CR_SVM_DIS_MASK 0x0010ULL + /* Hardware Feedback Interface */ #define MSR_IA32_HW_FEEDBACK_PTR 0x17d0 #define MSR_IA32_HW_FEEDBACK_CONFIG 0x17d1 diff --git a/tools/arch/x86/include/uapi/asm/prctl.h b/tools/arch/x86/include/uapi/asm/prctl.h index e8d7ebbca1a4..384e2cc6ac19 100644 --- a/tools/arch/x86/include/uapi/asm/prctl.h +++ b/tools/arch/x86/include/uapi/asm/prctl.h @@ -23,9 +23,21 @@ #define ARCH_MAP_VDSO_32 0x2002 #define ARCH_MAP_VDSO_64 0x2003 +/* Don't use 0x3001-0x3004 because of old glibcs */ + #define ARCH_GET_UNTAG_MASK 0x4001 #define ARCH_ENABLE_TAGGED_ADDR 0x4002 #define ARCH_GET_MAX_TAG_BITS 0x4003 #define ARCH_FORCE_TAGGED_SVA 0x4004 +#define ARCH_SHSTK_ENABLE 0x5001 +#define ARCH_SHSTK_DISABLE 0x5002 +#define ARCH_SHSTK_LOCK 0x5003 +#define ARCH_SHSTK_UNLOCK 0x5004 +#define ARCH_SHSTK_STATUS 0x5005 + +/* ARCH_SHSTK_ features bits */ +#define ARCH_SHSTK_SHSTK (1ULL << 0) +#define ARCH_SHSTK_WRSS (1ULL << 1) + #endif /* _ASM_X86_PRCTL_H */ -- cgit v1.2.3 From fad8afdcc18ff72e1d90c558be364f26534b8a5b Mon Sep 17 00:00:00 2001 From: Namhyung Kim Date: Tue, 21 Nov 2023 14:56:44 -0800 Subject: tools headers: Update tools's copy of arm64/asm headers tldr; Just FYI, I'm carrying this on the perf tools tree. Full explanation: There used to be no copies, with tools/ code using kernel headers directly. From time to time tools/perf/ broke due to legitimate kernel hacking. At some point Linus complained about such direct usage. Then we adopted the current model. The way these headers are used in perf are not restricted to just including them to compile something. There are sometimes used in scripts that convert defines into string tables, etc, so some change may break one of these scripts, or new MSRs may use some different #define pattern, etc. E.g.: $ ls -1 tools/perf/trace/beauty/*.sh | head -5 tools/perf/trace/beauty/arch_errno_names.sh tools/perf/trace/beauty/drm_ioctl.sh tools/perf/trace/beauty/fadvise.sh tools/perf/trace/beauty/fsconfig.sh tools/perf/trace/beauty/fsmount.sh $ $ tools/perf/trace/beauty/fadvise.sh static const char *fadvise_advices[] = { [0] = "NORMAL", [1] = "RANDOM", [2] = "SEQUENTIAL", [3] = "WILLNEED", [4] = "DONTNEED", [5] = "NOREUSE", }; $ The tools/perf/check-headers.sh script, part of the tools/ build process, points out changes in the original files. So its important not to touch the copies in tools/ when doing changes in the original kernel headers, that will be done later, when check-headers.sh inform about the change to the perf tools hackers. Cc: Catalin Marinas Cc: Will Deacon Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Namhyung Kim Link: https://lore.kernel.org/r/20231121225650.390246-9-namhyung@kernel.org --- tools/arch/arm64/include/asm/cputype.h | 5 ++++- tools/arch/arm64/include/uapi/asm/kvm.h | 32 +++++++++++++++++++++++++++ tools/arch/arm64/include/uapi/asm/perf_regs.h | 10 +++++---- 3 files changed, 42 insertions(+), 5 deletions(-) diff --git a/tools/arch/arm64/include/asm/cputype.h b/tools/arch/arm64/include/asm/cputype.h index 5f6f84837a49..7c7493cb571f 100644 --- a/tools/arch/arm64/include/asm/cputype.h +++ b/tools/arch/arm64/include/asm/cputype.h @@ -79,13 +79,15 @@ #define ARM_CPU_PART_CORTEX_A78AE 0xD42 #define ARM_CPU_PART_CORTEX_X1 0xD44 #define ARM_CPU_PART_CORTEX_A510 0xD46 +#define ARM_CPU_PART_CORTEX_A520 0xD80 #define ARM_CPU_PART_CORTEX_A710 0xD47 #define ARM_CPU_PART_CORTEX_A715 0xD4D #define ARM_CPU_PART_CORTEX_X2 0xD48 #define ARM_CPU_PART_NEOVERSE_N2 0xD49 #define ARM_CPU_PART_CORTEX_A78C 0xD4B -#define APM_CPU_PART_POTENZA 0x000 +#define APM_CPU_PART_XGENE 0x000 +#define APM_CPU_VAR_POTENZA 0x00 #define CAVIUM_CPU_PART_THUNDERX 0x0A1 #define CAVIUM_CPU_PART_THUNDERX_81XX 0x0A2 @@ -148,6 +150,7 @@ #define MIDR_CORTEX_A78AE MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A78AE) #define MIDR_CORTEX_X1 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_X1) #define MIDR_CORTEX_A510 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A510) +#define MIDR_CORTEX_A520 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A520) #define MIDR_CORTEX_A710 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A710) #define MIDR_CORTEX_A715 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A715) #define MIDR_CORTEX_X2 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_X2) diff --git a/tools/arch/arm64/include/uapi/asm/kvm.h b/tools/arch/arm64/include/uapi/asm/kvm.h index f7ddd73a8c0f..89d2fc872d9f 100644 --- a/tools/arch/arm64/include/uapi/asm/kvm.h +++ b/tools/arch/arm64/include/uapi/asm/kvm.h @@ -505,6 +505,38 @@ struct kvm_smccc_filter { #define KVM_HYPERCALL_EXIT_SMC (1U << 0) #define KVM_HYPERCALL_EXIT_16BIT (1U << 1) +/* + * Get feature ID registers userspace writable mask. + * + * From DDI0487J.a, D19.2.66 ("ID_AA64MMFR2_EL1, AArch64 Memory Model + * Feature Register 2"): + * + * "The Feature ID space is defined as the System register space in + * AArch64 with op0==3, op1=={0, 1, 3}, CRn==0, CRm=={0-7}, + * op2=={0-7}." + * + * This covers all currently known R/O registers that indicate + * anything useful feature wise, including the ID registers. + * + * If we ever need to introduce a new range, it will be described as + * such in the range field. + */ +#define KVM_ARM_FEATURE_ID_RANGE_IDX(op0, op1, crn, crm, op2) \ + ({ \ + __u64 __op1 = (op1) & 3; \ + __op1 -= (__op1 == 3); \ + (__op1 << 6 | ((crm) & 7) << 3 | (op2)); \ + }) + +#define KVM_ARM_FEATURE_ID_RANGE 0 +#define KVM_ARM_FEATURE_ID_RANGE_SIZE (3 * 8 * 8) + +struct reg_mask_range { + __u64 addr; /* Pointer to mask array */ + __u32 range; /* Requested range */ + __u32 reserved[13]; +}; + #endif #endif /* __ARM_KVM_H__ */ diff --git a/tools/arch/arm64/include/uapi/asm/perf_regs.h b/tools/arch/arm64/include/uapi/asm/perf_regs.h index fd157f46727e..86e556429e0e 100644 --- a/tools/arch/arm64/include/uapi/asm/perf_regs.h +++ b/tools/arch/arm64/include/uapi/asm/perf_regs.h @@ -36,11 +36,13 @@ enum perf_event_arm_regs { PERF_REG_ARM64_LR, PERF_REG_ARM64_SP, PERF_REG_ARM64_PC, + PERF_REG_ARM64_MAX, /* Extended/pseudo registers */ - PERF_REG_ARM64_VG = 46, // SVE Vector Granule - - PERF_REG_ARM64_MAX = PERF_REG_ARM64_PC + 1, - PERF_REG_ARM64_EXTENDED_MAX = PERF_REG_ARM64_VG + 1 + PERF_REG_ARM64_VG = 46, /* SVE Vector Granule */ + PERF_REG_ARM64_EXTENDED_MAX }; + +#define PERF_REG_EXTENDED_MASK (1ULL << PERF_REG_ARM64_VG) + #endif /* _ASM_ARM64_PERF_REGS_H */ -- cgit v1.2.3 From e1d7426bb9156d34d385d0516a7309c8f33c55bc Mon Sep 17 00:00:00 2001 From: Namhyung Kim Date: Tue, 21 Nov 2023 14:56:45 -0800 Subject: tools headers: Update tools's copy of s390/asm headers tldr; Just FYI, I'm carrying this on the perf tools tree. Full explanation: There used to be no copies, with tools/ code using kernel headers directly. From time to time tools/perf/ broke due to legitimate kernel hacking. At some point Linus complained about such direct usage. Then we adopted the current model. The way these headers are used in perf are not restricted to just including them to compile something. There are sometimes used in scripts that convert defines into string tables, etc, so some change may break one of these scripts, or new MSRs may use some different #define pattern, etc. E.g.: $ ls -1 tools/perf/trace/beauty/*.sh | head -5 tools/perf/trace/beauty/arch_errno_names.sh tools/perf/trace/beauty/drm_ioctl.sh tools/perf/trace/beauty/fadvise.sh tools/perf/trace/beauty/fsconfig.sh tools/perf/trace/beauty/fsmount.sh $ $ tools/perf/trace/beauty/fadvise.sh static const char *fadvise_advices[] = { [0] = "NORMAL", [1] = "RANDOM", [2] = "SEQUENTIAL", [3] = "WILLNEED", [4] = "DONTNEED", [5] = "NOREUSE", }; $ The tools/perf/check-headers.sh script, part of the tools/ build process, points out changes in the original files. So its important not to touch the copies in tools/ when doing changes in the original kernel headers, that will be done later, when check-headers.sh inform about the change to the perf tools hackers. Cc: Heiko Carstens Cc: Vasily Gorbik Cc: Alexander Gordeev Cc: Christian Borntraeger Cc: Sven Schnelle Cc: linux-s390@vger.kernel.org Signed-off-by: Namhyung Kim Link: https://lore.kernel.org/r/20231121225650.390246-10-namhyung@kernel.org --- tools/arch/s390/include/uapi/asm/kvm.h | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/tools/arch/s390/include/uapi/asm/kvm.h b/tools/arch/s390/include/uapi/asm/kvm.h index a73cf01a1606..abe926d43cbe 100644 --- a/tools/arch/s390/include/uapi/asm/kvm.h +++ b/tools/arch/s390/include/uapi/asm/kvm.h @@ -159,6 +159,22 @@ struct kvm_s390_vm_cpu_subfunc { __u8 reserved[1728]; }; +#define KVM_S390_VM_CPU_PROCESSOR_UV_FEAT_GUEST 6 +#define KVM_S390_VM_CPU_MACHINE_UV_FEAT_GUEST 7 + +#define KVM_S390_VM_CPU_UV_FEAT_NR_BITS 64 +struct kvm_s390_vm_cpu_uv_feat { + union { + struct { + __u64 : 4; + __u64 ap : 1; /* bit 4 */ + __u64 ap_intr : 1; /* bit 5 */ + __u64 : 58; + }; + __u64 feat; + }; +}; + /* kvm attributes for crypto */ #define KVM_S390_VM_CRYPTO_ENABLE_AES_KW 0 #define KVM_S390_VM_CRYPTO_ENABLE_DEA_KW 1 -- cgit v1.2.3 From b3b11aed147af8f7c3d79c5b0b7474505d1dde7b Mon Sep 17 00:00:00 2001 From: Namhyung Kim Date: Tue, 21 Nov 2023 14:56:46 -0800 Subject: tools/perf: Update tools's copy of x86 syscall table tldr; Just FYI, I'm carrying this on the perf tools tree. Full explanation: There used to be no copies, with tools/ code using kernel headers directly. From time to time tools/perf/ broke due to legitimate kernel hacking. At some point Linus complained about such direct usage. Then we adopted the current model. The way these headers are used in perf are not restricted to just including them to compile something. There are sometimes used in scripts that convert defines into string tables, etc, so some change may break one of these scripts, or new MSRs may use some different #define pattern, etc. E.g.: $ ls -1 tools/perf/trace/beauty/*.sh | head -5 tools/perf/trace/beauty/arch_errno_names.sh tools/perf/trace/beauty/drm_ioctl.sh tools/perf/trace/beauty/fadvise.sh tools/perf/trace/beauty/fsconfig.sh tools/perf/trace/beauty/fsmount.sh $ $ tools/perf/trace/beauty/fadvise.sh static const char *fadvise_advices[] = { [0] = "NORMAL", [1] = "RANDOM", [2] = "SEQUENTIAL", [3] = "WILLNEED", [4] = "DONTNEED", [5] = "NOREUSE", }; $ The tools/perf/check-headers.sh script, part of the tools/ build process, points out changes in the original files. So its important not to touch the copies in tools/ when doing changes in the original kernel headers, that will be done later, when check-headers.sh inform about the change to the perf tools hackers. Cc: Thomas Gleixner Cc: Ingo Molnar Cc: Borislav Petkov Cc: Dave Hansen Cc: x86@kernel.org Cc: "H. Peter Anvin" Signed-off-by: Namhyung Kim Link: https://lore.kernel.org/r/20231121225650.390246-11-namhyung@kernel.org --- tools/perf/arch/x86/entry/syscalls/syscall_64.tbl | 3 +++ 1 file changed, 3 insertions(+) diff --git a/tools/perf/arch/x86/entry/syscalls/syscall_64.tbl b/tools/perf/arch/x86/entry/syscalls/syscall_64.tbl index 2a62eaf30d69..8cb8bf68721c 100644 --- a/tools/perf/arch/x86/entry/syscalls/syscall_64.tbl +++ b/tools/perf/arch/x86/entry/syscalls/syscall_64.tbl @@ -375,6 +375,9 @@ 451 common cachestat sys_cachestat 452 common fchmodat2 sys_fchmodat2 453 64 map_shadow_stack sys_map_shadow_stack +454 common futex_wake sys_futex_wake +455 common futex_wait sys_futex_wait +456 common futex_requeue sys_futex_requeue # # Due to a historical design error, certain syscalls are numbered differently -- cgit v1.2.3 From 3483d2440538aa2575c3cddac0b7f42d488570cf Mon Sep 17 00:00:00 2001 From: Namhyung Kim Date: Tue, 21 Nov 2023 14:56:47 -0800 Subject: tools/perf: Update tools's copy of powerpc syscall table tldr; Just FYI, I'm carrying this on the perf tools tree. Full explanation: There used to be no copies, with tools/ code using kernel headers directly. From time to time tools/perf/ broke due to legitimate kernel hacking. At some point Linus complained about such direct usage. Then we adopted the current model. The way these headers are used in perf are not restricted to just including them to compile something. There are sometimes used in scripts that convert defines into string tables, etc, so some change may break one of these scripts, or new MSRs may use some different #define pattern, etc. E.g.: $ ls -1 tools/perf/trace/beauty/*.sh | head -5 tools/perf/trace/beauty/arch_errno_names.sh tools/perf/trace/beauty/drm_ioctl.sh tools/perf/trace/beauty/fadvise.sh tools/perf/trace/beauty/fsconfig.sh tools/perf/trace/beauty/fsmount.sh $ $ tools/perf/trace/beauty/fadvise.sh static const char *fadvise_advices[] = { [0] = "NORMAL", [1] = "RANDOM", [2] = "SEQUENTIAL", [3] = "WILLNEED", [4] = "DONTNEED", [5] = "NOREUSE", }; $ The tools/perf/check-headers.sh script, part of the tools/ build process, points out changes in the original files. So its important not to touch the copies in tools/ when doing changes in the original kernel headers, that will be done later, when check-headers.sh inform about the change to the perf tools hackers. Cc: Michael Ellerman Cc: Nicholas Piggin Cc: Christophe Leroy Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Namhyung Kim Link: https://lore.kernel.org/r/20231121225650.390246-12-namhyung@kernel.org --- tools/perf/arch/powerpc/entry/syscalls/syscall.tbl | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/tools/perf/arch/powerpc/entry/syscalls/syscall.tbl b/tools/perf/arch/powerpc/entry/syscalls/syscall.tbl index e1412519b4ad..7fab411378f2 100644 --- a/tools/perf/arch/powerpc/entry/syscalls/syscall.tbl +++ b/tools/perf/arch/powerpc/entry/syscalls/syscall.tbl @@ -539,3 +539,7 @@ 450 nospu set_mempolicy_home_node sys_set_mempolicy_home_node 451 common cachestat sys_cachestat 452 common fchmodat2 sys_fchmodat2 +453 common map_shadow_stack sys_ni_syscall +454 common futex_wake sys_futex_wake +455 common futex_wait sys_futex_wait +456 common futex_requeue sys_futex_requeue -- cgit v1.2.3 From d3968c974a2453de9289bdb9d34130b2ce323628 Mon Sep 17 00:00:00 2001 From: Namhyung Kim Date: Tue, 21 Nov 2023 14:56:48 -0800 Subject: tools/perf: Update tools's copy of s390 syscall table tldr; Just FYI, I'm carrying this on the perf tools tree. Full explanation: There used to be no copies, with tools/ code using kernel headers directly. From time to time tools/perf/ broke due to legitimate kernel hacking. At some point Linus complained about such direct usage. Then we adopted the current model. The way these headers are used in perf are not restricted to just including them to compile something. There are sometimes used in scripts that convert defines into string tables, etc, so some change may break one of these scripts, or new MSRs may use some different #define pattern, etc. E.g.: $ ls -1 tools/perf/trace/beauty/*.sh | head -5 tools/perf/trace/beauty/arch_errno_names.sh tools/perf/trace/beauty/drm_ioctl.sh tools/perf/trace/beauty/fadvise.sh tools/perf/trace/beauty/fsconfig.sh tools/perf/trace/beauty/fsmount.sh $ $ tools/perf/trace/beauty/fadvise.sh static const char *fadvise_advices[] = { [0] = "NORMAL", [1] = "RANDOM", [2] = "SEQUENTIAL", [3] = "WILLNEED", [4] = "DONTNEED", [5] = "NOREUSE", }; $ The tools/perf/check-headers.sh script, part of the tools/ build process, points out changes in the original files. So its important not to touch the copies in tools/ when doing changes in the original kernel headers, that will be done later, when check-headers.sh inform about the change to the perf tools hackers. Cc: Heiko Carstens Cc: Vasily Gorbik Cc: Alexander Gordeev Cc: Christian Borntraeger Cc: Sven Schnelle Cc: linux-s390@vger.kernel.org Signed-off-by: Namhyung Kim Link: https://lore.kernel.org/r/20231121225650.390246-13-namhyung@kernel.org --- tools/perf/arch/s390/entry/syscalls/syscall.tbl | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/tools/perf/arch/s390/entry/syscalls/syscall.tbl b/tools/perf/arch/s390/entry/syscalls/syscall.tbl index cc0bc144b661..86fec9b080f6 100644 --- a/tools/perf/arch/s390/entry/syscalls/syscall.tbl +++ b/tools/perf/arch/s390/entry/syscalls/syscall.tbl @@ -455,3 +455,7 @@ 450 common set_mempolicy_home_node sys_set_mempolicy_home_node sys_set_mempolicy_home_node 451 common cachestat sys_cachestat sys_cachestat 452 common fchmodat2 sys_fchmodat2 sys_fchmodat2 +453 common map_shadow_stack sys_map_shadow_stack sys_map_shadow_stack +454 common futex_wake sys_futex_wake sys_futex_wake +455 common futex_wait sys_futex_wait sys_futex_wait +456 common futex_requeue sys_futex_requeue sys_futex_requeue -- cgit v1.2.3 From 027905fe5baec70a00e00890e982d035d6c8b6b3 Mon Sep 17 00:00:00 2001 From: Namhyung Kim Date: Tue, 21 Nov 2023 14:56:49 -0800 Subject: tools/perf: Update tools's copy of mips syscall table tldr; Just FYI, I'm carrying this on the perf tools tree. Full explanation: There used to be no copies, with tools/ code using kernel headers directly. From time to time tools/perf/ broke due to legitimate kernel hacking. At some point Linus complained about such direct usage. Then we adopted the current model. The way these headers are used in perf are not restricted to just including them to compile something. There are sometimes used in scripts that convert defines into string tables, etc, so some change may break one of these scripts, or new MSRs may use some different #define pattern, etc. E.g.: $ ls -1 tools/perf/trace/beauty/*.sh | head -5 tools/perf/trace/beauty/arch_errno_names.sh tools/perf/trace/beauty/drm_ioctl.sh tools/perf/trace/beauty/fadvise.sh tools/perf/trace/beauty/fsconfig.sh tools/perf/trace/beauty/fsmount.sh $ $ tools/perf/trace/beauty/fadvise.sh static const char *fadvise_advices[] = { [0] = "NORMAL", [1] = "RANDOM", [2] = "SEQUENTIAL", [3] = "WILLNEED", [4] = "DONTNEED", [5] = "NOREUSE", }; $ The tools/perf/check-headers.sh script, part of the tools/ build process, points out changes in the original files. So its important not to touch the copies in tools/ when doing changes in the original kernel headers, that will be done later, when check-headers.sh inform about the change to the perf tools hackers. Cc: Thomas Bogendoerfer Cc: linux-mips@vger.kernel.org Signed-off-by: Namhyung Kim Link: https://lore.kernel.org/r/20231121225650.390246-14-namhyung@kernel.org --- tools/perf/arch/mips/entry/syscalls/syscall_n64.tbl | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/tools/perf/arch/mips/entry/syscalls/syscall_n64.tbl b/tools/perf/arch/mips/entry/syscalls/syscall_n64.tbl index 80be0e98ea0c..116ff501bf92 100644 --- a/tools/perf/arch/mips/entry/syscalls/syscall_n64.tbl +++ b/tools/perf/arch/mips/entry/syscalls/syscall_n64.tbl @@ -367,3 +367,7 @@ 450 common set_mempolicy_home_node sys_set_mempolicy_home_node 451 n64 cachestat sys_cachestat 452 n64 fchmodat2 sys_fchmodat2 +453 n64 map_shadow_stack sys_map_shadow_stack +454 n64 futex_wake sys_futex_wake +455 n64 futex_wait sys_futex_wait +456 n64 futex_requeue sys_futex_requeue -- cgit v1.2.3 From ef5c958090a909c9f2ab717ba6abb86869e42da7 Mon Sep 17 00:00:00 2001 From: Oliver Upton Date: Tue, 21 Nov 2023 19:29:55 +0000 Subject: tools perf: Add arm64 sysreg files to MANIFEST Ian pointed out that source tarballs are incomplete as of commit e2bdd172e665 ("perf build: Generate arm64's sysreg-defs.h and add to include path"), since the source files needed from the kernel tree do not appear in the manifest. Add them. Reported-by: Ian Rogers Fixes: e2bdd172e665 ("perf build: Generate arm64's sysreg-defs.h and add to include path") Signed-off-by: Oliver Upton Link: https://lore.kernel.org/r/20231121192956.919380-2-oliver.upton@linux.dev Signed-off-by: Namhyung Kim --- tools/perf/MANIFEST | 2 ++ 1 file changed, 2 insertions(+) diff --git a/tools/perf/MANIFEST b/tools/perf/MANIFEST index 1da7f4b91b4f..dc42de1785ce 100644 --- a/tools/perf/MANIFEST +++ b/tools/perf/MANIFEST @@ -1,3 +1,5 @@ +arch/arm64/tools/gen-sysreg.awk +arch/arm64/tools/sysreg tools/perf tools/arch tools/scripts -- cgit v1.2.3 From a29ee6aea7030786a63fde0d6d83a8f477b060fb Mon Sep 17 00:00:00 2001 From: Oliver Upton Date: Tue, 21 Nov 2023 19:29:56 +0000 Subject: perf build: Ensure sysreg-defs Makefile respects output dir Currently the sysreg-defs are written out to the source tree unconditionally, ignoring the specified output directory. Correct the build rule to emit the header to the output directory. Opportunistically reorganize the rules to avoid interleaving with the set of beauty make rules. Reported-by: Ian Rogers Signed-off-by: Oliver Upton Link: https://lore.kernel.org/r/20231121192956.919380-3-oliver.upton@linux.dev Signed-off-by: Namhyung Kim --- tools/arch/arm64/tools/Makefile | 2 +- tools/perf/Makefile.perf | 24 +++++++++++++++--------- tools/perf/util/Build | 2 +- tools/testing/selftests/kvm/Makefile | 5 +++-- 4 files changed, 20 insertions(+), 13 deletions(-) diff --git a/tools/arch/arm64/tools/Makefile b/tools/arch/arm64/tools/Makefile index 7f64b8bb5107..7b42feedf647 100644 --- a/tools/arch/arm64/tools/Makefile +++ b/tools/arch/arm64/tools/Makefile @@ -22,7 +22,7 @@ endif arm64_tools_dir = $(top_srcdir)/arch/arm64/tools arm64_sysreg_tbl = $(arm64_tools_dir)/sysreg arm64_gen_sysreg = $(arm64_tools_dir)/gen-sysreg.awk -arm64_generated_dir = $(top_srcdir)/tools/arch/arm64/include/generated +arm64_generated_dir = $(OUTPUT)arch/arm64/include/generated arm64_sysreg_defs = $(arm64_generated_dir)/asm/sysreg-defs.h all: $(arm64_sysreg_defs) diff --git a/tools/perf/Makefile.perf b/tools/perf/Makefile.perf index d88da787e815..058c9aecf608 100644 --- a/tools/perf/Makefile.perf +++ b/tools/perf/Makefile.perf @@ -434,6 +434,21 @@ export INSTALL SHELL_PATH SHELL = $(SHELL_PATH) +arm64_gen_sysreg_dir := $(srctree)/tools/arch/arm64/tools +ifneq ($(OUTPUT),) + arm64_gen_sysreg_outdir := $(OUTPUT) +else + arm64_gen_sysreg_outdir := $(CURDIR) +endif + +arm64-sysreg-defs: FORCE + $(Q)$(MAKE) -C $(arm64_gen_sysreg_dir) O=$(arm64_gen_sysreg_outdir) + +arm64-sysreg-defs-clean: + $(call QUIET_CLEAN,arm64-sysreg-defs) + $(Q)$(MAKE) -C $(arm64_gen_sysreg_dir) O=$(arm64_gen_sysreg_outdir) \ + clean > /dev/null + beauty_linux_dir := $(srctree)/tools/perf/trace/beauty/include/linux/ linux_uapi_dir := $(srctree)/tools/include/uapi/linux asm_generic_uapi_dir := $(srctree)/tools/include/uapi/asm-generic @@ -450,15 +465,6 @@ drm_ioctl_tbl := $(srctree)/tools/perf/trace/beauty/drm_ioctl.sh # Create output directory if not already present _dummy := $(shell [ -d '$(beauty_ioctl_outdir)' ] || mkdir -p '$(beauty_ioctl_outdir)') -arm64_gen_sysreg_dir := $(srctree)/tools/arch/arm64/tools - -arm64-sysreg-defs: FORCE - $(Q)$(MAKE) -C $(arm64_gen_sysreg_dir) - -arm64-sysreg-defs-clean: - $(call QUIET_CLEAN,arm64-sysreg-defs) - $(Q)$(MAKE) -C $(arm64_gen_sysreg_dir) clean > /dev/null - $(drm_ioctl_array): $(drm_hdr_dir)/drm.h $(drm_hdr_dir)/i915_drm.h $(drm_ioctl_tbl) $(Q)$(SHELL) '$(drm_ioctl_tbl)' $(drm_hdr_dir) > $@ diff --git a/tools/perf/util/Build b/tools/perf/util/Build index fb661c48992f..988473bf907a 100644 --- a/tools/perf/util/Build +++ b/tools/perf/util/Build @@ -347,7 +347,7 @@ CFLAGS_rbtree.o += -Wno-unused-parameter -DETC_PERFCONFIG="BUILD_STR($(ET CFLAGS_libstring.o += -Wno-unused-parameter -DETC_PERFCONFIG="BUILD_STR($(ETC_PERFCONFIG_SQ))" CFLAGS_hweight.o += -Wno-unused-parameter -DETC_PERFCONFIG="BUILD_STR($(ETC_PERFCONFIG_SQ))" CFLAGS_header.o += -include $(OUTPUT)PERF-VERSION-FILE -CFLAGS_arm-spe.o += -I$(srctree)/tools/arch/arm64/include/ -I$(srctree)/tools/arch/arm64/include/generated/ +CFLAGS_arm-spe.o += -I$(srctree)/tools/arch/arm64/include/ -I$(OUTPUT)arch/arm64/include/generated/ $(OUTPUT)util/argv_split.o: ../lib/argv_split.c FORCE $(call rule_mkdir) diff --git a/tools/testing/selftests/kvm/Makefile b/tools/testing/selftests/kvm/Makefile index a5963ab9215b..52c59bad7213 100644 --- a/tools/testing/selftests/kvm/Makefile +++ b/tools/testing/selftests/kvm/Makefile @@ -18,12 +18,13 @@ else endif ifeq ($(ARCH),arm64) -arm64_tools_dir := $(top_srcdir)/tools/arch/arm64/tools/ +tools_dir := $(top_srcdir)/tools +arm64_tools_dir := $(tools_dir)/arch/arm64/tools/ GEN_HDRS := $(top_srcdir)/tools/arch/arm64/include/generated/ CFLAGS += -I$(GEN_HDRS) $(GEN_HDRS): $(wildcard $(arm64_tools_dir)/*) - $(MAKE) -C $(arm64_tools_dir) + $(MAKE) -C $(arm64_tools_dir) O=$(tools_dir) endif LIBKVM += lib/assert.c -- cgit v1.2.3 From 35732699f5d2922ff674e711e566cf44a4bd86d2 Mon Sep 17 00:00:00 2001 From: Dave Jiang Date: Wed, 22 Nov 2023 08:33:53 -0700 Subject: ACPI: Fix ARM32 platforms compile issue introduced by fw_table changes Linus reported that: After commit a103f46633fd the kernel stopped compiling for several ARM32 platforms that I am building with a bare metal compiler. Bare metal compilers (arm-none-eabi-) don't define __linux__. This is because the header is now in the include path for : CC arch/arm/kernel/irq.o CC kernel/sysctl.o CC crypto/api.o In file included from ../include/acpi/acpi.h:22, from ../include/linux/fw_table.h:29, from ../include/linux/acpi.h:18, from ../include/linux/irqchip.h:14, from ../arch/arm/kernel/irq.c:25: ../include/acpi/platform/acenv.h:218:2: error: #error Unknown target environment 218 | #error Unknown target environment | ^~~~~ The issue is caused by the introducing of splitting out the ACPI code to support the new generic fw_table code. Rafael suggested [1] moving the fw_table.h include in linux/acpi.h to below the linux/mutex.h. Remove the two includes in fw_table.h. Replace linux/fw_table.h include in fw_table.c with linux/acpi.h. Link: https://lore.kernel.org/linux-acpi/CAJZ5v0idWdJq3JSqQWLG5q+b+b=zkEdWR55rGYEoxh7R6N8kFQ@mail.gmail.com/ Fixes: a103f46633fd ("acpi: Move common tables helper functions to common lib") Closes: https://lore.kernel.org/linux-acpi/20231114-arm-build-bug-v1-1-458745fe32a4@linaro.org/ Reported-by: Linus Walleij Suggested-by: Rafael J. Wysocki Tested-by: Linus Walleij Signed-off-by: Dave Jiang Acked-by: Rafael J. Wysocki Signed-off-by: Rafael J. Wysocki --- include/linux/acpi.h | 22 +++++++++++----------- include/linux/fw_table.h | 3 --- lib/fw_table.c | 2 +- 3 files changed, 12 insertions(+), 15 deletions(-) diff --git a/include/linux/acpi.h b/include/linux/acpi.h index 54189e0e5f41..4db54e928b36 100644 --- a/include/linux/acpi.h +++ b/include/linux/acpi.h @@ -15,7 +15,6 @@ #include #include #include -#include struct irq_domain; struct irq_domain_ops; @@ -25,22 +24,13 @@ struct irq_domain_ops; #endif #include -#ifdef CONFIG_ACPI_TABLE_LIB -#define EXPORT_SYMBOL_ACPI_LIB(x) EXPORT_SYMBOL_NS_GPL(x, ACPI) -#define __init_or_acpilib -#define __initdata_or_acpilib -#else -#define EXPORT_SYMBOL_ACPI_LIB(x) -#define __init_or_acpilib __init -#define __initdata_or_acpilib __initdata -#endif - #ifdef CONFIG_ACPI #include #include #include #include +#include #include #include @@ -48,6 +38,16 @@ struct irq_domain_ops; #include #include +#ifdef CONFIG_ACPI_TABLE_LIB +#define EXPORT_SYMBOL_ACPI_LIB(x) EXPORT_SYMBOL_NS_GPL(x, ACPI) +#define __init_or_acpilib +#define __initdata_or_acpilib +#else +#define EXPORT_SYMBOL_ACPI_LIB(x) +#define __init_or_acpilib __init +#define __initdata_or_acpilib __initdata +#endif + static inline acpi_handle acpi_device_handle(struct acpi_device *adev) { return adev ? adev->handle : NULL; diff --git a/include/linux/fw_table.h b/include/linux/fw_table.h index ff8fa58d5818..ca49947f0a77 100644 --- a/include/linux/fw_table.h +++ b/include/linux/fw_table.h @@ -25,9 +25,6 @@ struct acpi_subtable_proc { int count; }; -#include -#include - union acpi_subtable_headers { struct acpi_subtable_header common; struct acpi_hmat_structure hmat; diff --git a/lib/fw_table.c b/lib/fw_table.c index b51f30a28e47..294df54e33b6 100644 --- a/lib/fw_table.c +++ b/lib/fw_table.c @@ -7,7 +7,7 @@ * Copyright (C) 2023 Intel Corp. */ #include -#include +#include #include #include #include -- cgit v1.2.3 From 57686a72da08ae555d93148aa8756b16417a6aff Mon Sep 17 00:00:00 2001 From: Arnaldo Carvalho de Melo Date: Thu, 9 Nov 2023 16:34:09 -0300 Subject: tools: Disable __packed attribute compiler warning due to -Werror=attributes Noticed on several perf tools cross build test containers: [perfbuilder@five ~]$ grep FAIL ~/dm.log/summary 19 10.18 debian:experimental-x-mips : FAIL gcc version 12.3.0 (Debian 12.3.0-6) 20 11.21 debian:experimental-x-mips64 : FAIL gcc version 12.3.0 (Debian 12.3.0-6) 21 11.30 debian:experimental-x-mipsel : FAIL gcc version 12.3.0 (Debian 12.3.0-6) 37 12.07 ubuntu:18.04-x-arm : FAIL gcc version 7.5.0 (Ubuntu/Linaro 7.5.0-3ubuntu1~18.04) 42 11.91 ubuntu:18.04-x-riscv64 : FAIL gcc version 7.5.0 (Ubuntu 7.5.0-3ubuntu1~18.04) 44 13.17 ubuntu:18.04-x-sh4 : FAIL gcc version 7.5.0 (Ubuntu 7.5.0-3ubuntu1~18.04) 45 12.09 ubuntu:18.04-x-sparc64 : FAIL gcc version 7.5.0 (Ubuntu 7.5.0-3ubuntu1~18.04) [perfbuilder@five ~]$ In file included from util/intel-pt-decoder/intel-pt-pkt-decoder.c:10: /tmp/perf-6.6.0-rc1/tools/include/asm-generic/unaligned.h: In function 'get_unaligned_le16': /tmp/perf-6.6.0-rc1/tools/include/asm-generic/unaligned.h:13:29: error: packed attribute causes inefficient alignment for 'x' [-Werror=attributes] 13 | const struct { type x; } __packed *__pptr = (typeof(__pptr))(ptr); \ | ^ /tmp/perf-6.6.0-rc1/tools/include/asm-generic/unaligned.h:27:28: note: in expansion of macro '__get_unaligned_t' 27 | return le16_to_cpu(__get_unaligned_t(__le16, p)); | ^~~~~~~~~~~~~~~~~ This comes from the kernel, where the -Wattributes and -Wpacked isn't used, -Wpacked is already disabled, do it for the attributes as well. Fixes: a91c987254651443 ("perf tools: Add get_unaligned_leNN()") Suggested-by: Adrian Hunter Cc: Ian Rogers Cc: Jiri Olsa Cc: Namhyung Kim Link: https://lore.kernel.org/lkml/7c5b626c-1de9-4c12-a781-e44985b4a797@intel.com Signed-off-by: Arnaldo Carvalho de Melo Signed-off-by: Namhyung Kim --- tools/include/asm-generic/unaligned.h | 1 + 1 file changed, 1 insertion(+) diff --git a/tools/include/asm-generic/unaligned.h b/tools/include/asm-generic/unaligned.h index 156743d399ae..2fd551915c20 100644 --- a/tools/include/asm-generic/unaligned.h +++ b/tools/include/asm-generic/unaligned.h @@ -8,6 +8,7 @@ */ #pragma GCC diagnostic push #pragma GCC diagnostic ignored "-Wpacked" +#pragma GCC diagnostic ignored "-Wattributes" #define __get_unaligned_t(type, ptr) ({ \ const struct { type x; } __packed *__pptr = (typeof(__pptr))(ptr); \ -- cgit v1.2.3 From 4763d635c907baed212664dc579dde1663bb2676 Mon Sep 17 00:00:00 2001 From: "Steven Rostedt (Google)" Date: Tue, 21 Nov 2023 18:10:04 -0500 Subject: eventfs: Use GFP_NOFS for allocation when eventfs_mutex is held If memory reclaim happens, it can reclaim file system pages. The file system pages from eventfs may take the eventfs_mutex on reclaim. This means that allocation while holding the eventfs_mutex must not call into filesystem reclaim. A lockdep splat uncovered this. Link: https://lkml.kernel.org/r/20231121231112.373501894@goodmis.org Cc: Masami Hiramatsu Cc: Andrew Morton Fixes: 28e12c09f5aa0 ("eventfs: Save ownership and mode") Fixes: 5790b1fb3d672 ("eventfs: Remove eventfs_file and just use eventfs_inode") Reported-by: Mark Rutland Reviewed-by: Josef Bacik Signed-off-by: Steven Rostedt (Google) --- fs/tracefs/event_inode.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/tracefs/event_inode.c b/fs/tracefs/event_inode.c index 3eb6c622a74d..56d192f0ead8 100644 --- a/fs/tracefs/event_inode.c +++ b/fs/tracefs/event_inode.c @@ -95,7 +95,7 @@ static int eventfs_set_attr(struct mnt_idmap *idmap, struct dentry *dentry, if (!(dentry->d_inode->i_mode & S_IFDIR)) { if (!ei->entry_attrs) { ei->entry_attrs = kzalloc(sizeof(*ei->entry_attrs) * ei->nr_entries, - GFP_KERNEL); + GFP_NOFS); if (!ei->entry_attrs) { ret = -ENOMEM; goto out; @@ -627,7 +627,7 @@ static int add_dentries(struct dentry ***dentries, struct dentry *d, int cnt) { struct dentry **tmp; - tmp = krealloc(*dentries, sizeof(d) * (cnt + 2), GFP_KERNEL); + tmp = krealloc(*dentries, sizeof(d) * (cnt + 2), GFP_NOFS); if (!tmp) return -1; tmp[cnt] = d; -- cgit v1.2.3 From bcae32c5632fc0a0dbce46fa731cd23403117e66 Mon Sep 17 00:00:00 2001 From: "Steven Rostedt (Google)" Date: Tue, 21 Nov 2023 18:10:05 -0500 Subject: eventfs: Move taking of inode_lock into dcache_dir_open_wrapper() The both create_file_dentry() and create_dir_dentry() takes a boolean parameter "lookup", as on lookup the inode_lock should already be taken, but for dcache_dir_open_wrapper() it is not taken. There's no reason that the dcache_dir_open_wrapper() can't take the inode_lock before calling these functions. In fact, it's better if it does, as the lock can be held throughout both directory and file creations. This also simplifies the code, and possibly prevents unexpected race conditions when the lock is released. Link: https://lkml.kernel.org/r/20231121231112.528544825@goodmis.org Cc: Masami Hiramatsu Cc: Mark Rutland Cc: Andrew Morton Fixes: 5790b1fb3d672 ("eventfs: Remove eventfs_file and just use eventfs_inode") Reviewed-by: Josef Bacik Signed-off-by: Steven Rostedt (Google) --- fs/tracefs/event_inode.c | 16 ++-------------- 1 file changed, 2 insertions(+), 14 deletions(-) diff --git a/fs/tracefs/event_inode.c b/fs/tracefs/event_inode.c index 56d192f0ead8..590e8176449b 100644 --- a/fs/tracefs/event_inode.c +++ b/fs/tracefs/event_inode.c @@ -347,15 +347,8 @@ create_file_dentry(struct eventfs_inode *ei, int idx, mutex_unlock(&eventfs_mutex); - /* The lookup already has the parent->d_inode locked */ - if (!lookup) - inode_lock(parent->d_inode); - dentry = create_file(name, mode, attr, parent, data, fops); - if (!lookup) - inode_unlock(parent->d_inode); - mutex_lock(&eventfs_mutex); if (IS_ERR_OR_NULL(dentry)) { @@ -453,15 +446,8 @@ create_dir_dentry(struct eventfs_inode *pei, struct eventfs_inode *ei, } mutex_unlock(&eventfs_mutex); - /* The lookup already has the parent->d_inode locked */ - if (!lookup) - inode_lock(parent->d_inode); - dentry = create_dir(ei, parent); - if (!lookup) - inode_unlock(parent->d_inode); - mutex_lock(&eventfs_mutex); if (IS_ERR_OR_NULL(dentry) && !ei->is_freed) { @@ -693,6 +679,7 @@ static int dcache_dir_open_wrapper(struct inode *inode, struct file *file) return -ENOMEM; } + inode_lock(parent->d_inode); list_for_each_entry_srcu(ei_child, &ei->children, list, srcu_read_lock_held(&eventfs_srcu)) { d = create_dir_dentry(ei, ei_child, parent, false); @@ -725,6 +712,7 @@ static int dcache_dir_open_wrapper(struct inode *inode, struct file *file) cnt++; } } + inode_unlock(parent->d_inode); srcu_read_unlock(&eventfs_srcu, idx); ret = dcache_dir_open(inode, file); -- cgit v1.2.3 From fc4561226feaad5fcdcb55646c348d77b8ee69c5 Mon Sep 17 00:00:00 2001 From: "Steven Rostedt (Google)" Date: Tue, 21 Nov 2023 18:10:06 -0500 Subject: eventfs: Do not allow NULL parent to eventfs_start_creating() The eventfs directory is dynamically created via the meta data supplied by the existing trace events. All files and directories in eventfs has a parent. Do not allow NULL to be passed into eventfs_start_creating() as the parent because that should never happen. Warn if it does. Link: https://lkml.kernel.org/r/20231121231112.693841807@goodmis.org Cc: Masami Hiramatsu Cc: Mark Rutland Cc: Andrew Morton Reviewed-by: Josef Bacik Signed-off-by: Steven Rostedt (Google) --- fs/tracefs/inode.c | 13 ++++--------- 1 file changed, 4 insertions(+), 9 deletions(-) diff --git a/fs/tracefs/inode.c b/fs/tracefs/inode.c index 5b54948514fe..ae648deed019 100644 --- a/fs/tracefs/inode.c +++ b/fs/tracefs/inode.c @@ -509,20 +509,15 @@ struct dentry *eventfs_start_creating(const char *name, struct dentry *parent) struct dentry *dentry; int error; + /* Must always have a parent. */ + if (WARN_ON_ONCE(!parent)) + return ERR_PTR(-EINVAL); + error = simple_pin_fs(&trace_fs_type, &tracefs_mount, &tracefs_mount_count); if (error) return ERR_PTR(error); - /* - * If the parent is not specified, we create it in the root. - * We need the root dentry to do this, which is in the super - * block. A pointer to that is in the struct vfsmount that we - * have around. - */ - if (!parent) - parent = tracefs_mount->mnt_root; - if (unlikely(IS_DEADDIR(parent->d_inode))) dentry = ERR_PTR(-ENOENT); else -- cgit v1.2.3 From f49f950c217bfb40f11662bab39cb388d41e4cfb Mon Sep 17 00:00:00 2001 From: "Steven Rostedt (Google)" Date: Tue, 21 Nov 2023 18:10:07 -0500 Subject: eventfs: Make sure that parent->d_inode is locked in creating files/dirs Since the locking of the parent->d_inode has been moved outside the creation of the files and directories (as it use to be locked via a conditional), add a WARN_ON_ONCE() to the case that it's not locked. Link: https://lkml.kernel.org/r/20231121231112.853962542@goodmis.org Cc: Masami Hiramatsu Cc: Mark Rutland Cc: Andrew Morton Reviewed-by: Josef Bacik Signed-off-by: Steven Rostedt (Google) --- fs/tracefs/event_inode.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/fs/tracefs/event_inode.c b/fs/tracefs/event_inode.c index 590e8176449b..0b90869fd805 100644 --- a/fs/tracefs/event_inode.c +++ b/fs/tracefs/event_inode.c @@ -327,6 +327,8 @@ create_file_dentry(struct eventfs_inode *ei, int idx, struct dentry **e_dentry = &ei->d_children[idx]; struct dentry *dentry; + WARN_ON_ONCE(!inode_is_locked(parent->d_inode)); + mutex_lock(&eventfs_mutex); if (ei->is_freed) { mutex_unlock(&eventfs_mutex); @@ -430,6 +432,8 @@ create_dir_dentry(struct eventfs_inode *pei, struct eventfs_inode *ei, { struct dentry *dentry = NULL; + WARN_ON_ONCE(!inode_is_locked(parent->d_inode)); + mutex_lock(&eventfs_mutex); if (pei->is_freed || ei->is_freed) { mutex_unlock(&eventfs_mutex); -- cgit v1.2.3 From 76d9eafff4484547ed9e606c8227ac9799a9f2da Mon Sep 17 00:00:00 2001 From: Mathieu Desnoyers Date: Wed, 15 Nov 2023 10:50:18 -0500 Subject: MAINTAINERS: TRACING: Add Mathieu Desnoyers as Reviewer In order to make sure I get CC'd on tracing changes for which my input would be relevant, add my name as reviewer of the TRACING subsystem. Link: https://lore.kernel.org/linux-trace-kernel/20231115155018.8236-1-mathieu.desnoyers@efficios.com Acked-by: Masami Hiramatsu (Google) Signed-off-by: Mathieu Desnoyers Signed-off-by: Steven Rostedt (Google) --- MAINTAINERS | 1 + 1 file changed, 1 insertion(+) diff --git a/MAINTAINERS b/MAINTAINERS index ea790149af79..a2d4ef4d90f6 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -22078,6 +22078,7 @@ F: drivers/watchdog/tqmx86_wdt.c TRACING M: Steven Rostedt M: Masami Hiramatsu +R: Mathieu Desnoyers L: linux-kernel@vger.kernel.org L: linux-trace-kernel@vger.kernel.org S: Maintained -- cgit v1.2.3 From 36a1c2ee50f573972aea3c3019555f47ee0094c0 Mon Sep 17 00:00:00 2001 From: Dave Jiang Date: Fri, 17 Nov 2023 13:18:48 -0700 Subject: cxl/hdm: Fix a benign lockdep splat The new helper "cxl_num_decoders_committed()" added a lockdep assertion to validate that port->commit_end is protected against modification. That assertion fires in init_hdm_decoder() where it is initializing port->commit_end. Given that it is both accessing and writing that property it obstensibly needs the lock. In practice, CXL decoder commit rules (must commit in order) and the in-order discovery of device decoders makes the manipulation of ->commit_end in init_hdm_decoder() safe. However, rather than rely on the subtle rules of CXL hardware, just make the implementation obviously correct from a software perspective. The Fixes: tag is only for cleaning up a lockdep splat, there is no functional issue addressed by this fix. Fixes: 458ba8189cb4 ("cxl: Add cxl_decoders_committed() helper") Signed-off-by: Dave Jiang Link: https://lore.kernel.org/r/170025232811.2147250.16376901801315194121.stgit@djiang5-mobl3 Acked-by: Davidlohr Bueso Signed-off-by: Dan Williams --- drivers/cxl/core/hdm.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/cxl/core/hdm.c b/drivers/cxl/core/hdm.c index 1cc9be85ba4c..529baa8a1759 100644 --- a/drivers/cxl/core/hdm.c +++ b/drivers/cxl/core/hdm.c @@ -839,6 +839,8 @@ static int init_hdm_decoder(struct cxl_port *port, struct cxl_decoder *cxld, cxld->target_type = CXL_DECODER_HOSTONLYMEM; else cxld->target_type = CXL_DECODER_DEVMEM; + + guard(rwsem_write)(&cxl_region_rwsem); if (cxld->id != cxl_num_decoders_committed(port)) { dev_warn(&port->dev, "decoder%d.%d: Committed out of order\n", -- cgit v1.2.3 From d78abcbabe7e98bb4baa4dea87550806944790ed Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Wed, 22 Nov 2023 23:47:17 +0100 Subject: nvme: target: fix nvme_keyring_id() references In configurations without CONFIG_NVME_TARGET_TCP_TLS, the keyring code might not be available, or using it will result in a runtime failure: x86_64-linux-ld: vmlinux.o: in function `nvmet_ports_make': configfs.c:(.text+0x100a211): undefined reference to `nvme_keyring_id' Add a check to ensure we only check the keyring if there is a chance of it being used, which avoids both the runtime and link-time problems. Signed-off-by: Arnd Bergmann Link: https://lore.kernel.org/r/20231122224719.4042108-2-arnd@kernel.org Signed-off-by: Jens Axboe --- drivers/nvme/target/configfs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/nvme/target/configfs.c b/drivers/nvme/target/configfs.c index 9eed6e6765ea..e307a044b1a1 100644 --- a/drivers/nvme/target/configfs.c +++ b/drivers/nvme/target/configfs.c @@ -1893,7 +1893,7 @@ static struct config_group *nvmet_ports_make(struct config_group *group, return ERR_PTR(-ENOMEM); } - if (nvme_keyring_id()) { + if (IS_ENABLED(CONFIG_NVME_TARGET_TCP_TLS) && nvme_keyring_id()) { port->keyring = key_lookup(nvme_keyring_id()); if (IS_ERR(port->keyring)) { pr_warn("NVMe keyring not available, disabling TLS\n"); -- cgit v1.2.3 From 65e2a74c44ddfa174b700f5da2d1d29b4ba6639b Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Wed, 22 Nov 2023 23:47:18 +0100 Subject: nvme: target: fix Kconfig select statements When the NVME target code is built-in but its TCP frontend is a loadable module, enabling keyring support causes a link failure: x86_64-linux-ld: vmlinux.o: in function `nvmet_ports_make': configfs.c:(.text+0x100a211): undefined reference to `nvme_keyring_id' The problem is that CONFIG_NVME_TARGET_TCP_TLS is a 'bool' symbol that depends on the tristate CONFIG_NVME_TARGET_TCP, so any 'select' from it inherits the state of the tristate symbol rather than the intended CONFIG_NVME_TARGET one that contains the actual call. The same thing is true for CONFIG_KEYS, which itself is required for NVME_KEYRING. Signed-off-by: Arnd Bergmann Link: https://lore.kernel.org/r/20231122224719.4042108-3-arnd@kernel.org Signed-off-by: Jens Axboe --- drivers/nvme/target/Kconfig | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/nvme/target/Kconfig b/drivers/nvme/target/Kconfig index 31633da9427c..e1ebc73f3e5e 100644 --- a/drivers/nvme/target/Kconfig +++ b/drivers/nvme/target/Kconfig @@ -4,6 +4,8 @@ config NVME_TARGET tristate "NVMe Target support" depends on BLOCK depends on CONFIGFS_FS + select NVME_KEYRING if NVME_TARGET_TCP_TLS + select KEYS if NVME_TARGET_TCP_TLS select BLK_DEV_INTEGRITY_T10 if BLK_DEV_INTEGRITY select SGL_ALLOC help @@ -87,9 +89,7 @@ config NVME_TARGET_TCP config NVME_TARGET_TCP_TLS bool "NVMe over Fabrics TCP target TLS encryption support" depends on NVME_TARGET_TCP - select NVME_KEYRING select NET_HANDSHAKE - select KEYS help Enables TLS encryption for the NVMe TCP target using the netlink handshake API. -- cgit v1.2.3 From 0e6c4fe782e683ff55a27fbb10e9c6b5c241533b Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Wed, 22 Nov 2023 23:47:19 +0100 Subject: nvme: tcp: fix compile-time checks for TLS mode When CONFIG_NVME_KEYRING is enabled as a loadable module, but the TCP host code is built-in, it fails to link: arm-linux-gnueabi-ld: drivers/nvme/host/tcp.o: in function `nvme_tcp_setup_ctrl': tcp.c:(.text+0x1940): undefined reference to `nvme_tls_psk_default' The problem is that the compile-time conditionals are inconsistent here, using a mix of #ifdef CONFIG_NVME_TCP_TLS, IS_ENABLED(CONFIG_NVME_TCP_TLS) and IS_ENABLED(CONFIG_NVME_KEYRING) checks, with CONFIG_NVME_KEYRING controlling whether the implementation is actually built. Change it to use IS_ENABLED(CONFIG_NVME_KEYRING) checks consistently, which should help readability and make it less error-prone. Combining it with the check for the ctrl->opts->tls flag lets the compiler drop all the TLS code in configurations without this feature, which also helps runtime behavior in addition to avoiding the link failure. To make it possible for the compiler to build the dead code, both the tls_handshake_timeout variable and the TLS specific members of nvme_tcp_queue need to be moved out of the #ifdef block as well, but at least the former of these gets optimized out again. Signed-off-by: Arnd Bergmann Link: https://lore.kernel.org/r/20231122224719.4042108-4-arnd@kernel.org Signed-off-by: Jens Axboe --- drivers/nvme/host/tcp.c | 31 ++++++++++++++----------------- 1 file changed, 14 insertions(+), 17 deletions(-) diff --git a/drivers/nvme/host/tcp.c b/drivers/nvme/host/tcp.c index ddcd23fb8b75..d79811cfa0ce 100644 --- a/drivers/nvme/host/tcp.c +++ b/drivers/nvme/host/tcp.c @@ -36,11 +36,11 @@ static int so_priority; module_param(so_priority, int, 0644); MODULE_PARM_DESC(so_priority, "nvme tcp socket optimize priority"); -#ifdef CONFIG_NVME_TCP_TLS /* * TLS handshake timeout */ static int tls_handshake_timeout = 10; +#ifdef CONFIG_NVME_TCP_TLS module_param(tls_handshake_timeout, int, 0644); MODULE_PARM_DESC(tls_handshake_timeout, "nvme TLS handshake timeout in seconds (default 10)"); @@ -161,10 +161,8 @@ struct nvme_tcp_queue { struct ahash_request *snd_hash; __le32 exp_ddgst; __le32 recv_ddgst; -#ifdef CONFIG_NVME_TCP_TLS struct completion tls_complete; int tls_err; -#endif struct page_frag_cache pf_cache; void (*state_change)(struct sock *); @@ -207,6 +205,14 @@ static inline int nvme_tcp_queue_id(struct nvme_tcp_queue *queue) return queue - queue->ctrl->queues; } +static inline bool nvme_tcp_tls(struct nvme_ctrl *ctrl) +{ + if (!IS_ENABLED(CONFIG_NVME_TCP_TLS)) + return 0; + + return ctrl->opts->tls; +} + static inline struct blk_mq_tags *nvme_tcp_tagset(struct nvme_tcp_queue *queue) { u32 queue_idx = nvme_tcp_queue_id(queue); @@ -1412,7 +1418,7 @@ static int nvme_tcp_init_connection(struct nvme_tcp_queue *queue) memset(&msg, 0, sizeof(msg)); iov.iov_base = icresp; iov.iov_len = sizeof(*icresp); - if (queue->ctrl->ctrl.opts->tls) { + if (nvme_tcp_tls(&queue->ctrl->ctrl)) { msg.msg_control = cbuf; msg.msg_controllen = sizeof(cbuf); } @@ -1424,7 +1430,7 @@ static int nvme_tcp_init_connection(struct nvme_tcp_queue *queue) goto free_icresp; } ret = -ENOTCONN; - if (queue->ctrl->ctrl.opts->tls) { + if (nvme_tcp_tls(&queue->ctrl->ctrl)) { ctype = tls_get_record_type(queue->sock->sk, (struct cmsghdr *)cbuf); if (ctype != TLS_RECORD_TYPE_DATA) { @@ -1548,7 +1554,6 @@ static void nvme_tcp_set_queue_io_cpu(struct nvme_tcp_queue *queue) queue->io_cpu = cpumask_next_wrap(n - 1, cpu_online_mask, -1, false); } -#ifdef CONFIG_NVME_TCP_TLS static void nvme_tcp_tls_done(void *data, int status, key_serial_t pskid) { struct nvme_tcp_queue *queue = data; @@ -1625,14 +1630,6 @@ static int nvme_tcp_start_tls(struct nvme_ctrl *nctrl, } return ret; } -#else -static int nvme_tcp_start_tls(struct nvme_ctrl *nctrl, - struct nvme_tcp_queue *queue, - key_serial_t pskid) -{ - return -EPROTONOSUPPORT; -} -#endif static int nvme_tcp_alloc_queue(struct nvme_ctrl *nctrl, int qid, key_serial_t pskid) @@ -1759,7 +1756,7 @@ static int nvme_tcp_alloc_queue(struct nvme_ctrl *nctrl, int qid, } /* If PSKs are configured try to start TLS */ - if (pskid) { + if (IS_ENABLED(CONFIG_NVME_TCP_TLS) && pskid) { ret = nvme_tcp_start_tls(nctrl, queue, pskid); if (ret) goto err_init_connect; @@ -1916,7 +1913,7 @@ static int nvme_tcp_alloc_admin_queue(struct nvme_ctrl *ctrl) int ret; key_serial_t pskid = 0; - if (IS_ENABLED(CONFIG_NVME_TCP_TLS) && ctrl->opts->tls) { + if (nvme_tcp_tls(ctrl)) { if (ctrl->opts->tls_key) pskid = key_serial(ctrl->opts->tls_key); else @@ -1949,7 +1946,7 @@ static int __nvme_tcp_alloc_io_queues(struct nvme_ctrl *ctrl) { int i, ret; - if (ctrl->opts->tls && !ctrl->tls_key) { + if (nvme_tcp_tls(ctrl) && !ctrl->tls_key) { dev_err(ctrl->device, "no PSK negotiated\n"); return -ENOKEY; } -- cgit v1.2.3 From 2e4e0984c7d696cc74cf2fd7e7f62997f0e9ebe6 Mon Sep 17 00:00:00 2001 From: Christoph Niedermaier Date: Wed, 22 Nov 2023 14:41:13 +0100 Subject: cpufreq: imx6q: Don't disable 792 Mhz OPP unnecessarily For a 900MHz i.MX6ULL CPU the 792MHz OPP is disabled. There is no convincing reason to disable this OPP. If a CPU can run at 900MHz, it should also be able to cope with 792MHz. Looking at the voltage level of 792MHz in [1] (page 24, table 10. "Operating Ranges") the current defined OPP is above the minimum. So the voltage level shouldn't be a problem. However in [2] (page 24, table 10. "Operating Ranges"), it is not mentioned that 792MHz OPP isn't allowed. Change it to only disable 792MHz OPP for i.MX6ULL types below 792 MHz. [1] https://www.nxp.com/docs/en/data-sheet/IMX6ULLIEC.pdf [2] https://www.nxp.com/docs/en/data-sheet/IMX6ULLCEC.pdf Fixes: 0aa9abd4c212 ("cpufreq: imx6q: check speed grades for i.MX6ULL") Signed-off-by: Christoph Niedermaier Reviewed-by: Marek Vasut Reviewed-by: Fabio Estevam [ Viresh: Edited subject ] Signed-off-by: Viresh Kumar --- drivers/cpufreq/imx6q-cpufreq.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/cpufreq/imx6q-cpufreq.c b/drivers/cpufreq/imx6q-cpufreq.c index 494d044b9e72..33728c242f66 100644 --- a/drivers/cpufreq/imx6q-cpufreq.c +++ b/drivers/cpufreq/imx6q-cpufreq.c @@ -327,7 +327,7 @@ static int imx6ul_opp_check_speed_grading(struct device *dev) imx6x_disable_freq_in_opp(dev, 696000000); if (of_machine_is_compatible("fsl,imx6ull")) { - if (val != OCOTP_CFG3_6ULL_SPEED_792MHZ) + if (val < OCOTP_CFG3_6ULL_SPEED_792MHZ) imx6x_disable_freq_in_opp(dev, 792000000); if (val != OCOTP_CFG3_6ULL_SPEED_900MHZ) -- cgit v1.2.3 From 5cbff51e709a72a60b0416b00521b835a1f9a3d5 Mon Sep 17 00:00:00 2001 From: Stephan Gerhold Date: Tue, 14 Nov 2023 11:07:43 +0100 Subject: cpufreq: qcom-nvmem: Enable virtual power domain devices The genpd core caches performance state votes from devices that are runtime suspended as of commit 3c5a272202c2 ("PM: domains: Improve runtime PM performance state handling"). They get applied once the device becomes active again. To attach the power domains needed by qcom-cpufreq-nvmem the OPP core calls genpd_dev_pm_attach_by_id(). This results in "virtual" dummy devices that use runtime PM only to control the enable and performance state for the attached power domain. However, at the moment nothing ever resumes the virtual devices created for qcom-cpufreq-nvmem. They remain permanently runtime suspended. This means that performance state votes made during cpufreq scaling get always cached and never applied to the hardware. Fix this by enabling the devices after attaching them. Without this fix performance states votes are silently ignored, and the CPU/CPR voltage is never adjusted. This has been broken since 5.14 but for some reason no one noticed this on QCS404 so far. Fixes: 1cb8339ca225 ("cpufreq: qcom: Add support for qcs404 on nvmem driver") Signed-off-by: Stephan Gerhold Reviewed-by: Ulf Hansson Signed-off-by: Viresh Kumar --- drivers/cpufreq/qcom-cpufreq-nvmem.c | 46 +++++++++++++++++++++++++++++++++--- 1 file changed, 43 insertions(+), 3 deletions(-) diff --git a/drivers/cpufreq/qcom-cpufreq-nvmem.c b/drivers/cpufreq/qcom-cpufreq-nvmem.c index 6355a39418c5..d239a45ed497 100644 --- a/drivers/cpufreq/qcom-cpufreq-nvmem.c +++ b/drivers/cpufreq/qcom-cpufreq-nvmem.c @@ -25,6 +25,7 @@ #include #include #include +#include #include #include @@ -55,6 +56,7 @@ struct qcom_cpufreq_match_data { struct qcom_cpufreq_drv_cpu { int opp_token; + struct device **virt_devs; }; struct qcom_cpufreq_drv { @@ -424,6 +426,18 @@ static const struct qcom_cpufreq_match_data match_data_ipq8074 = { .get_version = qcom_cpufreq_ipq8074_name_version, }; +static void qcom_cpufreq_put_virt_devs(struct qcom_cpufreq_drv *drv, unsigned int cpu) +{ + const char * const *name = drv->data->genpd_names; + int i; + + if (!drv->cpus[cpu].virt_devs) + return; + + for (i = 0; *name; i++, name++) + pm_runtime_put(drv->cpus[cpu].virt_devs[i]); +} + static int qcom_cpufreq_probe(struct platform_device *pdev) { struct qcom_cpufreq_drv *drv; @@ -478,6 +492,7 @@ static int qcom_cpufreq_probe(struct platform_device *pdev) of_node_put(np); for_each_possible_cpu(cpu) { + struct device **virt_devs = NULL; struct dev_pm_opp_config config = { .supported_hw = NULL, }; @@ -498,7 +513,7 @@ static int qcom_cpufreq_probe(struct platform_device *pdev) if (drv->data->genpd_names) { config.genpd_names = drv->data->genpd_names; - config.virt_devs = NULL; + config.virt_devs = &virt_devs; } if (config.supported_hw || config.genpd_names) { @@ -509,6 +524,27 @@ static int qcom_cpufreq_probe(struct platform_device *pdev) goto free_opp; } } + + if (virt_devs) { + const char * const *name = config.genpd_names; + int i, j; + + for (i = 0; *name; i++, name++) { + ret = pm_runtime_resume_and_get(virt_devs[i]); + if (ret) { + dev_err(cpu_dev, "failed to resume %s: %d\n", + *name, ret); + + /* Rollback previous PM runtime calls */ + name = config.genpd_names; + for (j = 0; *name && j < i; j++, name++) + pm_runtime_put(virt_devs[j]); + + goto free_opp; + } + } + drv->cpus[cpu].virt_devs = virt_devs; + } } cpufreq_dt_pdev = platform_device_register_simple("cpufreq-dt", -1, @@ -522,8 +558,10 @@ static int qcom_cpufreq_probe(struct platform_device *pdev) dev_err(cpu_dev, "Failed to register platform device\n"); free_opp: - for_each_possible_cpu(cpu) + for_each_possible_cpu(cpu) { + qcom_cpufreq_put_virt_devs(drv, cpu); dev_pm_opp_clear_config(drv->cpus[cpu].opp_token); + } return ret; } @@ -534,8 +572,10 @@ static void qcom_cpufreq_remove(struct platform_device *pdev) platform_device_unregister(cpufreq_dt_pdev); - for_each_possible_cpu(cpu) + for_each_possible_cpu(cpu) { + qcom_cpufreq_put_virt_devs(drv, cpu); dev_pm_opp_clear_config(drv->cpus[cpu].opp_token); + } } static struct platform_driver qcom_cpufreq_driver = { -- cgit v1.2.3 From d6048a19a7104ce90dcc140d03dbe5796af3acd4 Mon Sep 17 00:00:00 2001 From: Stephan Gerhold Date: Tue, 14 Nov 2023 11:07:44 +0100 Subject: cpufreq: qcom-nvmem: Preserve PM domain votes in system suspend >From the Linux point of view, the power domains used by the CPU must stay always-on. This is because we still need the CPU to keep running until the last instruction, which will typically be a firmware call that shuts down the CPU cleanly. At the moment the power domain votes (enable + performance state) are dropped during system suspend, which means the CPU could potentially malfunction while entering suspend. We need to distinguish between two different setups used with qcom-cpufreq-nvmem: 1. CPR power domain: The backing regulator used by CPR should stay always-on in Linux; it is typically disabled automatically by hardware when the CPU enters a deep idle state. However, we should pause the CPR state machine during system suspend. 2. RPMPD: The power domains used by the CPU should stay always-on in Linux (also across system suspend). The CPU typically only uses the *_AO ("active-only") variants of the power domains in RPMPD. For those, the RPM firmware will automatically drop the votes internally when the CPU enters a deep idle state. Make this work correctly by calling device_set_awake_path() on the virtual genpd devices, so that the votes are maintained across system suspend. The power domain drivers need to set GENPD_FLAG_ACTIVE_WAKEUP to opt into staying on during system suspend. For now we only set this for the RPMPD case. For CPR, not setting it will ensure the state machine is still paused during system suspend, while the backing regulator will stay on with "regulator-always-on". Signed-off-by: Stephan Gerhold Reviewed-by: Ulf Hansson Signed-off-by: Viresh Kumar --- drivers/cpufreq/qcom-cpufreq-nvmem.c | 27 +++++++++++++++++++++++++++ 1 file changed, 27 insertions(+) diff --git a/drivers/cpufreq/qcom-cpufreq-nvmem.c b/drivers/cpufreq/qcom-cpufreq-nvmem.c index d239a45ed497..ea05d9d67490 100644 --- a/drivers/cpufreq/qcom-cpufreq-nvmem.c +++ b/drivers/cpufreq/qcom-cpufreq-nvmem.c @@ -23,6 +23,7 @@ #include #include #include +#include #include #include #include @@ -426,6 +427,18 @@ static const struct qcom_cpufreq_match_data match_data_ipq8074 = { .get_version = qcom_cpufreq_ipq8074_name_version, }; +static void qcom_cpufreq_suspend_virt_devs(struct qcom_cpufreq_drv *drv, unsigned int cpu) +{ + const char * const *name = drv->data->genpd_names; + int i; + + if (!drv->cpus[cpu].virt_devs) + return; + + for (i = 0; *name; i++, name++) + device_set_awake_path(drv->cpus[cpu].virt_devs[i]); +} + static void qcom_cpufreq_put_virt_devs(struct qcom_cpufreq_drv *drv, unsigned int cpu) { const char * const *name = drv->data->genpd_names; @@ -578,11 +591,25 @@ static void qcom_cpufreq_remove(struct platform_device *pdev) } } +static int qcom_cpufreq_suspend(struct device *dev) +{ + struct qcom_cpufreq_drv *drv = dev_get_drvdata(dev); + unsigned int cpu; + + for_each_possible_cpu(cpu) + qcom_cpufreq_suspend_virt_devs(drv, cpu); + + return 0; +} + +static DEFINE_SIMPLE_DEV_PM_OPS(qcom_cpufreq_pm_ops, qcom_cpufreq_suspend, NULL); + static struct platform_driver qcom_cpufreq_driver = { .probe = qcom_cpufreq_probe, .remove_new = qcom_cpufreq_remove, .driver = { .name = "qcom-cpufreq-nvmem", + .pm = pm_sleep_ptr(&qcom_cpufreq_pm_ops), }, }; -- cgit v1.2.3 From 8f96e29aae31354191227ad476dc7f6147ef1d75 Mon Sep 17 00:00:00 2001 From: Stephan Gerhold Date: Tue, 14 Nov 2023 11:07:45 +0100 Subject: pmdomain: qcom: rpmpd: Set GENPD_FLAG_ACTIVE_WAKEUP Set GENPD_FLAG_ACTIVE_WAKEUP for all RPM power domains so that power domains necessary for wakeup/"awake path" devices are kept on across suspend. This is needed for example for the *_AO ("active-only") variants of the RPMPDs used by the CPU. Those should maintain their votes also across system suspend to ensure the CPU can keep running for the whole suspend process (ending in a firmware call). When the RPM firmware detects that the CPUs are in a deep idle state it will drop those votes automatically. Signed-off-by: Stephan Gerhold Reviewed-by: Ulf Hansson Signed-off-by: Viresh Kumar --- drivers/pmdomain/qcom/rpmpd.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/pmdomain/qcom/rpmpd.c b/drivers/pmdomain/qcom/rpmpd.c index 07590a3ef19c..7796d65f96e8 100644 --- a/drivers/pmdomain/qcom/rpmpd.c +++ b/drivers/pmdomain/qcom/rpmpd.c @@ -1044,6 +1044,7 @@ static int rpmpd_probe(struct platform_device *pdev) rpmpds[i]->pd.power_off = rpmpd_power_off; rpmpds[i]->pd.power_on = rpmpd_power_on; rpmpds[i]->pd.set_performance_state = rpmpd_set_performance; + rpmpds[i]->pd.flags = GENPD_FLAG_ACTIVE_WAKEUP; pm_genpd_init(&rpmpds[i]->pd, NULL, true); data->domains[i] = &rpmpds[i]->pd; -- cgit v1.2.3 From 99360d9620f09fb8bc15548d855011bbb198c680 Mon Sep 17 00:00:00 2001 From: Lech Perczak Date: Sat, 18 Nov 2023 00:19:18 +0100 Subject: net: usb: qmi_wwan: claim interface 4 for ZTE MF290 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Interface 4 is used by for QMI interface in stock firmware of MF28D, the router which uses MF290 modem. Rebind it to qmi_wwan after freeing it up from option driver. The proper configuration is: Interface mapping is: 0: QCDM, 1: (unknown), 2: AT (PCUI), 2: AT (Modem), 4: QMI T: Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 4 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=19d2 ProdID=0189 Rev= 0.00 S: Manufacturer=ZTE, Incorporated S: Product=ZTE LTE Technologies MSM C:* #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=84(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=86(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms Cc: Bjørn Mork Signed-off-by: Lech Perczak Link: https://lore.kernel.org/r/20231117231918.100278-3-lech.perczak@gmail.com Signed-off-by: Paolo Abeni --- drivers/net/usb/qmi_wwan.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c index 344af3c5c836..e2e181378f41 100644 --- a/drivers/net/usb/qmi_wwan.c +++ b/drivers/net/usb/qmi_wwan.c @@ -1289,6 +1289,7 @@ static const struct usb_device_id products[] = { {QMI_FIXED_INTF(0x19d2, 0x0168, 4)}, {QMI_FIXED_INTF(0x19d2, 0x0176, 3)}, {QMI_FIXED_INTF(0x19d2, 0x0178, 3)}, + {QMI_FIXED_INTF(0x19d2, 0x0189, 4)}, /* ZTE MF290 */ {QMI_FIXED_INTF(0x19d2, 0x0191, 4)}, /* ZTE EuFi890 */ {QMI_FIXED_INTF(0x19d2, 0x0199, 1)}, /* ZTE MF820S */ {QMI_FIXED_INTF(0x19d2, 0x0200, 1)}, -- cgit v1.2.3 From 7bf9a6b46549852a37e6d07e52c601c3c706b562 Mon Sep 17 00:00:00 2001 From: Stefano Stabellini Date: Wed, 22 Nov 2023 15:07:41 -0800 Subject: arm/xen: fix xen_vcpu_info allocation alignment xen_vcpu_info is a percpu area than needs to be mapped by Xen. Currently, it could cross a page boundary resulting in Xen being unable to map it: [ 0.567318] kernel BUG at arch/arm64/xen/../../arm/xen/enlighten.c:164! [ 0.574002] Internal error: Oops - BUG: 00000000f2000800 [#1] PREEMPT SMP Fix the issue by using __alloc_percpu and requesting alignment for the memory allocation. Signed-off-by: Stefano Stabellini Link: https://lore.kernel.org/r/alpine.DEB.2.22.394.2311221501340.2053963@ubuntu-linux-20-04-desktop Fixes: 24d5373dda7c ("arm/xen: Use alloc_percpu rather than __alloc_percpu") Reviewed-by: Juergen Gross Signed-off-by: Juergen Gross --- arch/arm/xen/enlighten.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/arm/xen/enlighten.c b/arch/arm/xen/enlighten.c index 9afdc4c4a5dc..a395b6c0aae2 100644 --- a/arch/arm/xen/enlighten.c +++ b/arch/arm/xen/enlighten.c @@ -484,7 +484,8 @@ static int __init xen_guest_init(void) * for secondary CPUs as they are brought up. * For uniformity we use VCPUOP_register_vcpu_info even on cpu0. */ - xen_vcpu_info = alloc_percpu(struct vcpu_info); + xen_vcpu_info = __alloc_percpu(sizeof(struct vcpu_info), + 1 << fls(sizeof(struct vcpu_info) - 1)); if (xen_vcpu_info == NULL) return -ENOMEM; -- cgit v1.2.3 From 744f5e7b69710701dc225020769138f8ca2894df Mon Sep 17 00:00:00 2001 From: Ronald Wahl Date: Mon, 30 Oct 2023 20:01:13 +0100 Subject: dmaengine: ti: k3-psil-am62: Fix SPI PDMA data AM62x has 3 SPI channels where each channel has 4 TX and 4 RX threads. This also fixes the thread numbers. Signed-off-by: Ronald Wahl Fixes: 5ac6bfb58777 ("dmaengine: ti: k3-psil: Add AM62x PSIL and PDMA data") Reviewed-by: Jai Luthra Acked-by: Peter Ujfalusi Link: https://lore.kernel.org/r/20231030190113.16782-1-rwahl@gmx.de Signed-off-by: Vinod Koul --- drivers/dma/ti/k3-psil-am62.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/dma/ti/k3-psil-am62.c b/drivers/dma/ti/k3-psil-am62.c index 2b6fd6e37c61..1272b1541f61 100644 --- a/drivers/dma/ti/k3-psil-am62.c +++ b/drivers/dma/ti/k3-psil-am62.c @@ -74,7 +74,9 @@ static struct psil_ep am62_src_ep_map[] = { PSIL_SAUL(0x7505, 21, 35, 8, 36, 0), PSIL_SAUL(0x7506, 22, 43, 8, 43, 0), PSIL_SAUL(0x7507, 23, 43, 8, 44, 0), - /* PDMA_MAIN0 - SPI0-3 */ + /* PDMA_MAIN0 - SPI0-2 */ + PSIL_PDMA_XY_PKT(0x4300), + PSIL_PDMA_XY_PKT(0x4301), PSIL_PDMA_XY_PKT(0x4302), PSIL_PDMA_XY_PKT(0x4303), PSIL_PDMA_XY_PKT(0x4304), @@ -85,8 +87,6 @@ static struct psil_ep am62_src_ep_map[] = { PSIL_PDMA_XY_PKT(0x4309), PSIL_PDMA_XY_PKT(0x430a), PSIL_PDMA_XY_PKT(0x430b), - PSIL_PDMA_XY_PKT(0x430c), - PSIL_PDMA_XY_PKT(0x430d), /* PDMA_MAIN1 - UART0-6 */ PSIL_PDMA_XY_PKT(0x4400), PSIL_PDMA_XY_PKT(0x4401), @@ -141,7 +141,9 @@ static struct psil_ep am62_dst_ep_map[] = { /* SAUL */ PSIL_SAUL(0xf500, 27, 83, 8, 83, 1), PSIL_SAUL(0xf501, 28, 91, 8, 91, 1), - /* PDMA_MAIN0 - SPI0-3 */ + /* PDMA_MAIN0 - SPI0-2 */ + PSIL_PDMA_XY_PKT(0xc300), + PSIL_PDMA_XY_PKT(0xc301), PSIL_PDMA_XY_PKT(0xc302), PSIL_PDMA_XY_PKT(0xc303), PSIL_PDMA_XY_PKT(0xc304), @@ -152,8 +154,6 @@ static struct psil_ep am62_dst_ep_map[] = { PSIL_PDMA_XY_PKT(0xc309), PSIL_PDMA_XY_PKT(0xc30a), PSIL_PDMA_XY_PKT(0xc30b), - PSIL_PDMA_XY_PKT(0xc30c), - PSIL_PDMA_XY_PKT(0xc30d), /* PDMA_MAIN1 - UART0-6 */ PSIL_PDMA_XY_PKT(0xc400), PSIL_PDMA_XY_PKT(0xc401), -- cgit v1.2.3 From 4aa1d8f89b10cdc25a231dabf808d8935e0b137a Mon Sep 17 00:00:00 2001 From: Suman Ghosh Date: Tue, 21 Nov 2023 22:26:24 +0530 Subject: octeontx2-pf: Fix ntuple rule creation to direct packet to VF with higher Rx queue than its PF It is possible to add a ntuple rule which would like to direct packet to a VF whose number of queues are greater/less than its PF's queue numbers. For example a PF can have 2 Rx queues but a VF created on that PF can have 8 Rx queues. As of today, ntuple rule will reject rule because it is checking the requested queue number against PF's number of Rx queues. As a part of this fix if the action of a ntuple rule is to move a packet to a VF's queue then the check is removed. Also, a debug information is printed to aware user that it is user's responsibility to cross check if the requested queue number on that VF is a valid one. Fixes: f0a1913f8a6f ("octeontx2-pf: Add support for ethtool ntuple filters") Signed-off-by: Suman Ghosh Reviewed-by: Wojciech Drewek Reviewed-by: Simon Horman Link: https://lore.kernel.org/r/20231121165624.3664182-1-sumang@marvell.com Signed-off-by: Paolo Abeni --- .../net/ethernet/marvell/octeontx2/nic/otx2_flows.c | 20 +++++++++++++++++++- 1 file changed, 19 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_flows.c b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_flows.c index 4762dbea64a1..97a71e9b8563 100644 --- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_flows.c +++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_flows.c @@ -1088,6 +1088,7 @@ int otx2_add_flow(struct otx2_nic *pfvf, struct ethtool_rxnfc *nfc) struct ethhdr *eth_hdr; bool new = false; int err = 0; + u64 vf_num; u32 ring; if (!flow_cfg->max_flows) { @@ -1100,7 +1101,21 @@ int otx2_add_flow(struct otx2_nic *pfvf, struct ethtool_rxnfc *nfc) if (!(pfvf->flags & OTX2_FLAG_NTUPLE_SUPPORT)) return -ENOMEM; - if (ring >= pfvf->hw.rx_queues && fsp->ring_cookie != RX_CLS_FLOW_DISC) + /* Number of queues on a VF can be greater or less than + * the PF's queue. Hence no need to check for the + * queue count. Hence no need to check queue count if PF + * is installing for its VF. Below is the expected vf_num value + * based on the ethtool commands. + * + * e.g. + * 1. ethtool -U ... action -1 ==> vf_num:255 + * 2. ethtool -U ... action ==> vf_num:0 + * 3. ethtool -U ... vf queue ==> + * vf_num:vf_idx+1 + */ + vf_num = ethtool_get_flow_spec_ring_vf(fsp->ring_cookie); + if (!is_otx2_vf(pfvf->pcifunc) && !vf_num && + ring >= pfvf->hw.rx_queues && fsp->ring_cookie != RX_CLS_FLOW_DISC) return -EINVAL; if (fsp->location >= otx2_get_maxflows(flow_cfg)) @@ -1182,6 +1197,9 @@ int otx2_add_flow(struct otx2_nic *pfvf, struct ethtool_rxnfc *nfc) flow_cfg->nr_flows++; } + if (flow->is_vf) + netdev_info(pfvf->netdev, + "Make sure that VF's queue number is within its queue limit\n"); return 0; } -- cgit v1.2.3 From 818ad9cc90d4a7165caaee7e32800c50d0564ec3 Mon Sep 17 00:00:00 2001 From: Lorenzo Bianconi Date: Tue, 21 Nov 2023 20:08:44 +0100 Subject: net: veth: fix ethtool stats reporting Fix a possible misalignment between page_pool stats and tx xdp_stats reported in veth_get_ethtool_stats routine. The issue can be reproduced configuring the veth pair with the following tx/rx queues: $ip link add v0 numtxqueues 2 numrxqueues 4 type veth peer name v1 \ numtxqueues 1 numrxqueues 1 and loading a simple XDP program on v0 that just returns XDP_PASS. In this case on v0 the page_pool stats overwrites tx xdp_stats for queue 1. Fix the issue incrementing pp_idx of dev->real_num_tx_queues * VETH_TQ_STATS_LEN since we always report xdp_stats for all tx queues in ethtool. Fixes: 4fc418053ec7 ("net: veth: add page_pool stats") Signed-off-by: Lorenzo Bianconi Link: https://lore.kernel.org/r/c5b5d0485016836448453f12846c7c4ab75b094a.1700593593.git.lorenzo@kernel.org Signed-off-by: Paolo Abeni --- drivers/net/veth.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/veth.c b/drivers/net/veth.c index 6cc352296c67..57efb3454c57 100644 --- a/drivers/net/veth.c +++ b/drivers/net/veth.c @@ -236,8 +236,8 @@ static void veth_get_ethtool_stats(struct net_device *dev, data[tx_idx + j] += *(u64 *)(base + offset); } } while (u64_stats_fetch_retry(&rq_stats->syncp, start)); - pp_idx = tx_idx + VETH_TQ_STATS_LEN; } + pp_idx = idx + dev->real_num_tx_queues * VETH_TQ_STATS_LEN; page_pool_stats: veth_get_page_pool_stats(dev, &data[pp_idx]); -- cgit v1.2.3 From b52cbca22cbf6c9d2700c1e576d0ddcc670e49d5 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Mon, 20 Nov 2023 16:42:33 +0100 Subject: platform/x86: asus-wmi: Move i8042 filter install to shared asus-wmi code MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit asus-nb-wmi calls i8042_install_filter() in some cases, but it never calls i8042_remove_filter(). This means that a dangling pointer to the filter function is left after rmmod leading to crashes. Fix this by moving the i8042-filter installation to the shared asus-wmi code and also remove it from the shared code on driver unbind. Fixes: b5643539b825 ("platform/x86: asus-wmi: Filter buggy scan codes on ASUS Q500A") Cc: Oleksij Rempel Signed-off-by: Hans de Goede Link: https://lore.kernel.org/r/20231120154235.610808-2-hdegoede@redhat.com Reviewed-by: Ilpo Järvinen Signed-off-by: Ilpo Järvinen --- drivers/platform/x86/Kconfig | 2 +- drivers/platform/x86/asus-nb-wmi.c | 11 ----------- drivers/platform/x86/asus-wmi.c | 8 ++++++++ 3 files changed, 9 insertions(+), 12 deletions(-) diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig index 7e69fdaccdd5..c94f31a5c6a3 100644 --- a/drivers/platform/x86/Kconfig +++ b/drivers/platform/x86/Kconfig @@ -263,6 +263,7 @@ config ASUS_WMI depends on RFKILL || RFKILL = n depends on HOTPLUG_PCI depends on ACPI_VIDEO || ACPI_VIDEO = n + depends on SERIO_I8042 || SERIO_I8042 = n select INPUT_SPARSEKMAP select LEDS_CLASS select NEW_LEDS @@ -279,7 +280,6 @@ config ASUS_WMI config ASUS_NB_WMI tristate "Asus Notebook WMI Driver" depends on ASUS_WMI - depends on SERIO_I8042 || SERIO_I8042 = n help This is a driver for newer Asus notebooks. It adds extra features like wireless radio and bluetooth control, leds, hotkeys, backlight... diff --git a/drivers/platform/x86/asus-nb-wmi.c b/drivers/platform/x86/asus-nb-wmi.c index 9aa1226e74e6..ff794387581d 100644 --- a/drivers/platform/x86/asus-nb-wmi.c +++ b/drivers/platform/x86/asus-nb-wmi.c @@ -503,8 +503,6 @@ static const struct dmi_system_id asus_quirks[] = { static void asus_nb_wmi_quirks(struct asus_wmi_driver *driver) { - int ret; - quirks = &quirk_asus_unknown; dmi_check_system(asus_quirks); @@ -519,15 +517,6 @@ static void asus_nb_wmi_quirks(struct asus_wmi_driver *driver) if (tablet_mode_sw != -1) quirks->tablet_switch_mode = tablet_mode_sw; - - if (quirks->i8042_filter) { - ret = i8042_install_filter(quirks->i8042_filter); - if (ret) { - pr_warn("Unable to install key filter\n"); - return; - } - pr_info("Using i8042 filter function for receiving events\n"); - } } static const struct key_entry asus_nb_wmi_keymap[] = { diff --git a/drivers/platform/x86/asus-wmi.c b/drivers/platform/x86/asus-wmi.c index 6a79f16233ab..53e25cb467d7 100644 --- a/drivers/platform/x86/asus-wmi.c +++ b/drivers/platform/x86/asus-wmi.c @@ -4567,6 +4567,12 @@ static int asus_wmi_add(struct platform_device *pdev) goto fail_wmi_handler; } + if (asus->driver->quirks->i8042_filter) { + err = i8042_install_filter(asus->driver->quirks->i8042_filter); + if (err) + pr_warn("Unable to install key filter - %d\n", err); + } + asus_wmi_battery_init(asus); asus_wmi_debugfs_init(asus); @@ -4603,6 +4609,8 @@ static int asus_wmi_remove(struct platform_device *device) struct asus_wmi *asus; asus = platform_get_drvdata(device); + if (asus->driver->quirks->i8042_filter) + i8042_remove_filter(asus->driver->quirks->i8042_filter); wmi_remove_notify_handler(asus->driver->event_guid); asus_wmi_backlight_exit(asus); asus_screenpad_exit(asus); -- cgit v1.2.3 From 6db829fa2f1295aaad51a3c00f6fc57a27c444bb Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Mon, 20 Nov 2023 16:42:34 +0100 Subject: platform/x86: asus-wmi: Change q500a_i8042_filter() into a generic i8042-filter MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Change asus_q500a_i8042_filter() into a generic i8042-filter, using a new filter_i8042_e1_extended_codes flag in the quirks struct to decide if e1 extended codes should be filtered out or not. This is a preparation patch for adding support for filtering volume key events being reported twice through both the PS/2 keyboard and asus-wmi. Note while modifying the code also drop the unnecessary unlikely() annotations, this is not in a hot path so those are not necessary. Signed-off-by: Hans de Goede Link: https://lore.kernel.org/r/20231120154235.610808-3-hdegoede@redhat.com Reviewed-by: Ilpo Järvinen Signed-off-by: Ilpo Järvinen --- drivers/platform/x86/asus-nb-wmi.c | 27 +++++++++++++++------------ drivers/platform/x86/asus-wmi.c | 8 ++++---- drivers/platform/x86/asus-wmi.h | 7 ++++--- 3 files changed, 23 insertions(+), 19 deletions(-) diff --git a/drivers/platform/x86/asus-nb-wmi.c b/drivers/platform/x86/asus-nb-wmi.c index ff794387581d..16241556f6fb 100644 --- a/drivers/platform/x86/asus-nb-wmi.c +++ b/drivers/platform/x86/asus-nb-wmi.c @@ -49,24 +49,26 @@ MODULE_PARM_DESC(tablet_mode_sw, "Tablet mode detect: -1:auto 0:disable 1:kbd-do static struct quirk_entry *quirks; -static bool asus_q500a_i8042_filter(unsigned char data, unsigned char str, - struct serio *port) +static bool asus_i8042_filter(unsigned char data, unsigned char str, struct serio *port) { - static bool extended; - bool ret = false; + static bool extended_e1; if (str & I8042_STR_AUXDATA) return false; - if (unlikely(data == 0xe1)) { - extended = true; - ret = true; - } else if (unlikely(extended)) { - extended = false; - ret = true; + if (quirks->filter_i8042_e1_extended_codes) { + if (data == 0xe1) { + extended_e1 = true; + return true; + } + + if (extended_e1) { + extended_e1 = false; + return true; + } } - return ret; + return false; } static struct quirk_entry quirk_asus_unknown = { @@ -75,7 +77,7 @@ static struct quirk_entry quirk_asus_unknown = { }; static struct quirk_entry quirk_asus_q500a = { - .i8042_filter = asus_q500a_i8042_filter, + .filter_i8042_e1_extended_codes = true, .wmi_backlight_set_devstate = true, }; @@ -619,6 +621,7 @@ static struct asus_wmi_driver asus_nb_wmi_driver = { .input_phys = ASUS_NB_WMI_FILE "/input0", .detect_quirks = asus_nb_wmi_quirks, .key_filter = asus_nb_wmi_key_filter, + .i8042_filter = asus_i8042_filter, }; diff --git a/drivers/platform/x86/asus-wmi.c b/drivers/platform/x86/asus-wmi.c index 53e25cb467d7..ca668cf04020 100644 --- a/drivers/platform/x86/asus-wmi.c +++ b/drivers/platform/x86/asus-wmi.c @@ -4567,8 +4567,8 @@ static int asus_wmi_add(struct platform_device *pdev) goto fail_wmi_handler; } - if (asus->driver->quirks->i8042_filter) { - err = i8042_install_filter(asus->driver->quirks->i8042_filter); + if (asus->driver->i8042_filter) { + err = i8042_install_filter(asus->driver->i8042_filter); if (err) pr_warn("Unable to install key filter - %d\n", err); } @@ -4609,8 +4609,8 @@ static int asus_wmi_remove(struct platform_device *device) struct asus_wmi *asus; asus = platform_get_drvdata(device); - if (asus->driver->quirks->i8042_filter) - i8042_remove_filter(asus->driver->quirks->i8042_filter); + if (asus->driver->i8042_filter) + i8042_remove_filter(asus->driver->i8042_filter); wmi_remove_notify_handler(asus->driver->event_guid); asus_wmi_backlight_exit(asus); asus_screenpad_exit(asus); diff --git a/drivers/platform/x86/asus-wmi.h b/drivers/platform/x86/asus-wmi.h index adb67c925724..cc30f1853847 100644 --- a/drivers/platform/x86/asus-wmi.h +++ b/drivers/platform/x86/asus-wmi.h @@ -39,6 +39,7 @@ struct quirk_entry { bool wmi_backlight_set_devstate; bool wmi_force_als_set; bool wmi_ignore_fan; + bool filter_i8042_e1_extended_codes; enum asus_wmi_tablet_switch_mode tablet_switch_mode; int wapf; /* @@ -49,9 +50,6 @@ struct quirk_entry { */ int no_display_toggle; u32 xusb2pr; - - bool (*i8042_filter)(unsigned char data, unsigned char str, - struct serio *serio); }; struct asus_wmi_driver { @@ -73,6 +71,9 @@ struct asus_wmi_driver { * Return ASUS_WMI_KEY_IGNORE in code if event should be ignored. */ void (*key_filter) (struct asus_wmi_driver *driver, int *code, unsigned int *value, bool *autorelease); + /* Optional standard i8042 filter */ + bool (*i8042_filter)(unsigned char data, unsigned char str, + struct serio *serio); int (*probe) (struct platform_device *device); void (*detect_quirks) (struct asus_wmi_driver *driver); -- cgit v1.2.3 From fb103b90e944ecd664577c0fd37a069282dcd294 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Mon, 20 Nov 2023 16:42:35 +0100 Subject: platform/x86: asus-wmi: Filter Volume key presses if also reported via atkbd MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Use the i8042-filter to check if Volume key presses are also reported via atkbd and if yes then filter out the WMI events to avoid reporting each key-press twice. Note depending on in which order the PS/2 data vs the WMI event are handled the first volume key press may still be reported twice. This is a compromise versus DMI quirks (unmaintainable) or other more complex solutions. Closes: https://bbs.archlinux.org/viewtopic.php?pid=2128536#p2128536 Signed-off-by: Hans de Goede Link: https://lore.kernel.org/r/20231120154235.610808-4-hdegoede@redhat.com Reviewed-by: Ilpo Järvinen Signed-off-by: Ilpo Järvinen --- drivers/platform/x86/asus-nb-wmi.c | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+) diff --git a/drivers/platform/x86/asus-nb-wmi.c b/drivers/platform/x86/asus-nb-wmi.c index 16241556f6fb..fceffe2082ec 100644 --- a/drivers/platform/x86/asus-nb-wmi.c +++ b/drivers/platform/x86/asus-nb-wmi.c @@ -48,9 +48,11 @@ module_param(tablet_mode_sw, uint, 0444); MODULE_PARM_DESC(tablet_mode_sw, "Tablet mode detect: -1:auto 0:disable 1:kbd-dock 2:lid-flip 3:lid-flip-rog"); static struct quirk_entry *quirks; +static bool atkbd_reports_vol_keys; static bool asus_i8042_filter(unsigned char data, unsigned char str, struct serio *port) { + static bool extended_e0; static bool extended_e1; if (str & I8042_STR_AUXDATA) @@ -68,6 +70,20 @@ static bool asus_i8042_filter(unsigned char data, unsigned char str, struct seri } } + if (data == 0xe0) { + extended_e0 = true; + } else if (extended_e0) { + extended_e0 = false; + + switch (data & 0x7f) { + case 0x20: /* e0 20 / e0 a0, Volume Mute press / release */ + case 0x2e: /* e0 2e / e0 ae, Volume Down press / release */ + case 0x30: /* e0 30 / e0 b0, Volume Up press / release */ + atkbd_reports_vol_keys = true; + break; + } + } + return false; } @@ -608,6 +624,13 @@ static void asus_nb_wmi_key_filter(struct asus_wmi_driver *asus_wmi, int *code, if (acpi_video_handles_brightness_key_presses()) *code = ASUS_WMI_KEY_IGNORE; + break; + case 0x30: /* Volume Up */ + case 0x31: /* Volume Down */ + case 0x32: /* Volume Mute */ + if (atkbd_reports_vol_keys) + *code = ASUS_WMI_KEY_IGNORE; + break; } } -- cgit v1.2.3 From 3841d8a563a7473ceb7415ecfe577e20b2a66d37 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Thu, 23 Nov 2023 10:18:15 +0100 Subject: ASoC: soc-pcm: fix up bad merge A recent change to address pops and clicks with codecs like WSA883X touched the same code paths as a fix for clearing DAI parameters and resulted in a bad merge. Specifically, commit f0220575e65a ("ASoC: soc-dai: add flag to mute and unmute stream during trigger") made mute at stream close conditional, while commit 3efcb471f871 ("ASoC: soc-pcm.c: Make sure DAI parameters cleared if the DAI becomes inactive") moved that same mute call back to soc_pcm_hw_clean(). Fix up the bad merge by dropping the second mute call from soc_pcm_clean() and making sure that the call in soc_pcm_hw_clean() is conditional as intended. Fixes: bdb7e1922052 ("ASoC: Merge up workaround for CODECs that play noise on stopped stream") Signed-off-by: Johan Hovold Link: https://lore.kernel.org/r/20231123091815.21933-1-johan+linaro@kernel.org Signed-off-by: Mark Brown --- sound/soc/soc-pcm.c | 11 ++++------- 1 file changed, 4 insertions(+), 7 deletions(-) diff --git a/sound/soc/soc-pcm.c b/sound/soc/soc-pcm.c index 323e4d7b6adf..f6d1b2e11795 100644 --- a/sound/soc/soc-pcm.c +++ b/sound/soc/soc-pcm.c @@ -704,11 +704,6 @@ static int soc_pcm_clean(struct snd_soc_pcm_runtime *rtd, if (snd_soc_dai_active(dai) == 0 && (dai->rate || dai->channels || dai->sample_bits)) soc_pcm_set_dai_params(dai, NULL); - - if (snd_soc_dai_stream_active(dai, substream->stream) == 0) { - if (dai->driver->ops && !dai->driver->ops->mute_unmute_on_trigger) - snd_soc_dai_digital_mute(dai, 1, substream->stream); - } } } @@ -947,8 +942,10 @@ static int soc_pcm_hw_clean(struct snd_soc_pcm_runtime *rtd, if (snd_soc_dai_active(dai) == 1) soc_pcm_set_dai_params(dai, NULL); - if (snd_soc_dai_stream_active(dai, substream->stream) == 1) - snd_soc_dai_digital_mute(dai, 1, substream->stream); + if (snd_soc_dai_stream_active(dai, substream->stream) == 1) { + if (dai->driver->ops && !dai->driver->ops->mute_unmute_on_trigger) + snd_soc_dai_digital_mute(dai, 1, substream->stream); + } } /* run the stream event */ -- cgit v1.2.3 From 505c83212da5bfca95109421b8f5d9f8c6cdfef2 Mon Sep 17 00:00:00 2001 From: AngeloGioacchino Del Regno Date: Thu, 23 Nov 2023 09:44:54 +0100 Subject: ASoC: SOF: mediatek: mt8186: Add Google Steelix topology compatible Add the machine compatible and topology filename for the Google Steelix MT8186 Chromebook to load the correct SOF topology file. Signed-off-by: AngeloGioacchino Del Regno Link: https://lore.kernel.org/r/20231123084454.20471-1-angelogioacchino.delregno@collabora.com Signed-off-by: Mark Brown --- sound/soc/sof/mediatek/mt8186/mt8186.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/sound/soc/sof/mediatek/mt8186/mt8186.c b/sound/soc/sof/mediatek/mt8186/mt8186.c index b69fa788b16f..e0d88e7aa8ca 100644 --- a/sound/soc/sof/mediatek/mt8186/mt8186.c +++ b/sound/soc/sof/mediatek/mt8186/mt8186.c @@ -597,6 +597,9 @@ static struct snd_sof_dsp_ops sof_mt8186_ops = { static struct snd_sof_of_mach sof_mt8186_machs[] = { { + .compatible = "google,steelix", + .sof_tplg_filename = "sof-mt8186-google-steelix.tplg" + }, { .compatible = "mediatek,mt8186", .sof_tplg_filename = "sof-mt8186.tplg", }, -- cgit v1.2.3 From 347ecf29a68cc8958fbcbd26ef410d07fe9d82f4 Mon Sep 17 00:00:00 2001 From: Shengjiu Wang Date: Thu, 23 Nov 2023 09:14:53 +0800 Subject: ASoC: fsl_xcvr: refine the requested phy clock frequency As the input phy clock frequency will divided by 2 by default on i.MX8MP with the implementation of clk-imx8mp-audiomix driver, So the requested frequency need to be updated. The relation of phy clock is: sai_pll_ref_sel sai_pll sai_pll_bypass sai_pll_out sai_pll_out_div2 earc_phy_cg Signed-off-by: Shengjiu Wang Reviewed-by: Iuliana Prodan Link: https://lore.kernel.org/r/1700702093-8008-1-git-send-email-shengjiu.wang@nxp.com Signed-off-by: Mark Brown --- sound/soc/fsl/fsl_xcvr.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/soc/fsl/fsl_xcvr.c b/sound/soc/fsl/fsl_xcvr.c index 77f8e2394bf9..f0fb33d719c2 100644 --- a/sound/soc/fsl/fsl_xcvr.c +++ b/sound/soc/fsl/fsl_xcvr.c @@ -358,7 +358,7 @@ static int fsl_xcvr_en_aud_pll(struct fsl_xcvr *xcvr, u32 freq) struct device *dev = &xcvr->pdev->dev; int ret; - freq = xcvr->soc_data->spdif_only ? freq / 10 : freq; + freq = xcvr->soc_data->spdif_only ? freq / 5 : freq; clk_disable_unprepare(xcvr->phy_clk); ret = clk_set_rate(xcvr->phy_clk, freq); if (ret < 0) { @@ -409,7 +409,7 @@ static int fsl_xcvr_prepare(struct snd_pcm_substream *substream, bool tx = substream->stream == SNDRV_PCM_STREAM_PLAYBACK; u32 m_ctl = 0, v_ctl = 0; u32 r = substream->runtime->rate, ch = substream->runtime->channels; - u32 fout = 32 * r * ch * 10 * 2; + u32 fout = 32 * r * ch * 10; int ret = 0; switch (xcvr->mode) { -- cgit v1.2.3 From 676ec53844cbdf2f47e68a076cdff7f0ec6cbe3f Mon Sep 17 00:00:00 2001 From: Raju Rangoju Date: Wed, 22 Nov 2023 00:44:33 +0530 Subject: amd-xgbe: handle corner-case during sfp hotplug Force the mode change for SFI in Fixed PHY configurations. Fixed PHY configurations needs PLL to be enabled while doing mode set. When the SFP module isn't connected during boot, driver assumes AN is ON and attempts auto-negotiation. However, if the connected SFP comes up in Fixed PHY configuration the link will not come up as PLL isn't enabled while the initial mode set command is issued. So, force the mode change for SFI in Fixed PHY configuration to fix link issues. Fixes: e57f7a3feaef ("amd-xgbe: Prepare for working with more than one type of phy") Acked-by: Shyam Sundar S K Signed-off-by: Raju Rangoju Reviewed-by: Wojciech Drewek Signed-off-by: Paolo Abeni --- drivers/net/ethernet/amd/xgbe/xgbe-mdio.c | 14 +++++++++++++- 1 file changed, 13 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/amd/xgbe/xgbe-mdio.c b/drivers/net/ethernet/amd/xgbe/xgbe-mdio.c index 32d2c6fac652..4a2dc705b528 100644 --- a/drivers/net/ethernet/amd/xgbe/xgbe-mdio.c +++ b/drivers/net/ethernet/amd/xgbe/xgbe-mdio.c @@ -1193,7 +1193,19 @@ static int xgbe_phy_config_fixed(struct xgbe_prv_data *pdata) if (pdata->phy.duplex != DUPLEX_FULL) return -EINVAL; - xgbe_set_mode(pdata, mode); + /* Force the mode change for SFI in Fixed PHY config. + * Fixed PHY configs needs PLL to be enabled while doing mode set. + * When the SFP module isn't connected during boot, driver assumes + * AN is ON and attempts autonegotiation. However, if the connected + * SFP comes up in Fixed PHY config, the link will not come up as + * PLL isn't enabled while the initial mode set command is issued. + * So, force the mode change for SFI in Fixed PHY configuration to + * fix link issues. + */ + if (mode == XGBE_MODE_SFI) + xgbe_change_mode(pdata, mode); + else + xgbe_set_mode(pdata, mode); return 0; } -- cgit v1.2.3 From 7121205d5330c6a3cb3379348886d47c77b78d06 Mon Sep 17 00:00:00 2001 From: Raju Rangoju Date: Wed, 22 Nov 2023 00:44:34 +0530 Subject: amd-xgbe: handle the corner-case during tx completion The existing implementation uses software logic to accumulate tx completions until the specified time (1ms) is met and then poll them. However, there exists a tiny gap which leads to a race between resetting and checking the tx_activate flag. Due to this the tx completions are not reported to upper layer and tx queue timeout kicks-in restarting the device. To address this, introduce a tx cleanup mechanism as part of the periodic maintenance process. Fixes: c5aa9e3b8156 ("amd-xgbe: Initial AMD 10GbE platform driver") Acked-by: Shyam Sundar S K Signed-off-by: Raju Rangoju Reviewed-by: Wojciech Drewek Signed-off-by: Paolo Abeni --- drivers/net/ethernet/amd/xgbe/xgbe-drv.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/drivers/net/ethernet/amd/xgbe/xgbe-drv.c b/drivers/net/ethernet/amd/xgbe/xgbe-drv.c index 614c0278419b..6b73648b3779 100644 --- a/drivers/net/ethernet/amd/xgbe/xgbe-drv.c +++ b/drivers/net/ethernet/amd/xgbe/xgbe-drv.c @@ -682,10 +682,24 @@ static void xgbe_service(struct work_struct *work) static void xgbe_service_timer(struct timer_list *t) { struct xgbe_prv_data *pdata = from_timer(pdata, t, service_timer); + struct xgbe_channel *channel; + unsigned int i; queue_work(pdata->dev_workqueue, &pdata->service_work); mod_timer(&pdata->service_timer, jiffies + HZ); + + if (!pdata->tx_usecs) + return; + + for (i = 0; i < pdata->channel_count; i++) { + channel = pdata->channel[i]; + if (!channel->tx_ring || channel->tx_timer_active) + break; + channel->tx_timer_active = 1; + mod_timer(&channel->tx_timer, + jiffies + usecs_to_jiffies(pdata->tx_usecs)); + } } static void xgbe_init_timers(struct xgbe_prv_data *pdata) -- cgit v1.2.3 From 7a2323ac24a50311f64a3a9b54ed5bef5821ecae Mon Sep 17 00:00:00 2001 From: Raju Rangoju Date: Wed, 22 Nov 2023 00:44:35 +0530 Subject: amd-xgbe: propagate the correct speed and duplex status xgbe_get_link_ksettings() does not propagate correct speed and duplex information to ethtool during cable unplug. Due to which ethtool reports incorrect values for speed and duplex. Address this by propagating correct information. Fixes: 7c12aa08779c ("amd-xgbe: Move the PHY support into amd-xgbe") Acked-by: Shyam Sundar S K Signed-off-by: Raju Rangoju Reviewed-by: Wojciech Drewek Signed-off-by: Paolo Abeni --- drivers/net/ethernet/amd/xgbe/xgbe-ethtool.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) diff --git a/drivers/net/ethernet/amd/xgbe/xgbe-ethtool.c b/drivers/net/ethernet/amd/xgbe/xgbe-ethtool.c index 6e83ff59172a..32fab5e77246 100644 --- a/drivers/net/ethernet/amd/xgbe/xgbe-ethtool.c +++ b/drivers/net/ethernet/amd/xgbe/xgbe-ethtool.c @@ -314,10 +314,15 @@ static int xgbe_get_link_ksettings(struct net_device *netdev, cmd->base.phy_address = pdata->phy.address; - cmd->base.autoneg = pdata->phy.autoneg; - cmd->base.speed = pdata->phy.speed; - cmd->base.duplex = pdata->phy.duplex; + if (netif_carrier_ok(netdev)) { + cmd->base.speed = pdata->phy.speed; + cmd->base.duplex = pdata->phy.duplex; + } else { + cmd->base.speed = SPEED_UNKNOWN; + cmd->base.duplex = DUPLEX_UNKNOWN; + } + cmd->base.autoneg = pdata->phy.autoneg; cmd->base.port = PORT_NONE; XGBE_LM_COPY(cmd, supported, lks, supported); -- cgit v1.2.3 From 460e462d22542adfafd8a5bc979437df73f1cbf3 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Thu, 16 Nov 2023 12:52:29 +0000 Subject: kselftest/arm64: Fix output formatting for za-fork The za-fork test does not output a newline when reporting the result of the one test it runs, causing the counts printed by kselftest to be included in the test name. Add the newline. Fixes: 266679ffd867 ("kselftest/arm64: Convert za-fork to use kselftest.h") Cc: # 6.4.x Signed-off-by: Mark Brown Link: https://lore.kernel.org/r/20231116-arm64-fix-za-fork-output-v1-1-42c03d4f5759@kernel.org Signed-off-by: Catalin Marinas --- tools/testing/selftests/arm64/fp/za-fork.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/arm64/fp/za-fork.c b/tools/testing/selftests/arm64/fp/za-fork.c index b86cb1049497..587b94648222 100644 --- a/tools/testing/selftests/arm64/fp/za-fork.c +++ b/tools/testing/selftests/arm64/fp/za-fork.c @@ -85,7 +85,7 @@ int main(int argc, char **argv) */ ret = open("/proc/sys/abi/sme_default_vector_length", O_RDONLY, 0); if (ret >= 0) { - ksft_test_result(fork_test(), "fork_test"); + ksft_test_result(fork_test(), "fork_test\n"); } else { ksft_print_msg("SME not supported\n"); -- cgit v1.2.3 From 0ffb08b1a45bd6b7694e01da0e1d9e3e788418fb Mon Sep 17 00:00:00 2001 From: Jacob Keller Date: Tue, 21 Nov 2023 13:12:55 -0800 Subject: ice: remove ptp_tx ring parameter flag Before performing a Tx timestamp in ice_stamp(), the driver checks a ptp_tx ring variable to see if timestamping is enabled on that ring. This value is set for all rings whenever userspace configures Tx timestamping. Ostensibly this was done to avoid wasting cycles checking other fields when timestamping has not been enabled. However, for Tx timestamps we already get an individual per-SKB flag indicating whether userspace wants to request a timestamp on that packet. We do not gain much by also having a separate flag to check for whether timestamping was enabled. In fact, the driver currently fails to restore the field after a PF reset. Because of this, if a PF reset occurs, timestamps will be disabled. Since this flag doesn't add value in the hotpath, remove it and always provide a timestamp if the SKB flag has been set. A following change will fix the reset path to properly restore user timestamping configuration completely. This went unnoticed for some time because one of the most common applications using Tx timestamps, ptp4l, will reconfigure the socket as part of its fault recovery logic. Fixes: ea9b847cda64 ("ice: enable transmit timestamps for E810 devices") Signed-off-by: Jacob Keller Reviewed-by: Jesse Brandeburg Reviewed-by: Simon Horman Tested-by: Pucha Himasekhar Reddy (A Contingent worker at Intel) Signed-off-by: Tony Nguyen Signed-off-by: Paolo Abeni --- drivers/net/ethernet/intel/ice/ice_ptp.c | 14 -------------- drivers/net/ethernet/intel/ice/ice_txrx.c | 3 --- drivers/net/ethernet/intel/ice/ice_txrx.h | 1 - 3 files changed, 18 deletions(-) diff --git a/drivers/net/ethernet/intel/ice/ice_ptp.c b/drivers/net/ethernet/intel/ice/ice_ptp.c index 1eddcbe89b0c..affd90622a68 100644 --- a/drivers/net/ethernet/intel/ice/ice_ptp.c +++ b/drivers/net/ethernet/intel/ice/ice_ptp.c @@ -280,20 +280,6 @@ static void ice_ptp_configure_tx_tstamp(struct ice_pf *pf, bool on) */ static void ice_set_tx_tstamp(struct ice_pf *pf, bool on) { - struct ice_vsi *vsi; - u16 i; - - vsi = ice_get_main_vsi(pf); - if (!vsi) - return; - - /* Set the timestamp enable flag for all the Tx rings */ - ice_for_each_txq(vsi, i) { - if (!vsi->tx_rings[i]) - continue; - vsi->tx_rings[i]->ptp_tx = on; - } - if (pf->ptp.tx_interrupt_mode == ICE_PTP_TX_INTERRUPT_SELF) ice_ptp_configure_tx_tstamp(pf, on); diff --git a/drivers/net/ethernet/intel/ice/ice_txrx.c b/drivers/net/ethernet/intel/ice/ice_txrx.c index 52d0a126eb61..9e97ea863068 100644 --- a/drivers/net/ethernet/intel/ice/ice_txrx.c +++ b/drivers/net/ethernet/intel/ice/ice_txrx.c @@ -2306,9 +2306,6 @@ ice_tstamp(struct ice_tx_ring *tx_ring, struct sk_buff *skb, if (likely(!(skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP))) return; - if (!tx_ring->ptp_tx) - return; - /* Tx timestamps cannot be sampled when doing TSO */ if (first->tx_flags & ICE_TX_FLAGS_TSO) return; diff --git a/drivers/net/ethernet/intel/ice/ice_txrx.h b/drivers/net/ethernet/intel/ice/ice_txrx.h index 166413fc33f4..daf7b9dbb143 100644 --- a/drivers/net/ethernet/intel/ice/ice_txrx.h +++ b/drivers/net/ethernet/intel/ice/ice_txrx.h @@ -380,7 +380,6 @@ struct ice_tx_ring { #define ICE_TX_FLAGS_RING_VLAN_L2TAG2 BIT(2) u8 flags; u8 dcb_tc; /* Traffic class of ring */ - u8 ptp_tx; } ____cacheline_internodealigned_in_smp; static inline bool ice_ring_uses_build_skb(struct ice_rx_ring *ring) -- cgit v1.2.3 From 7d606a1e2d0575b6c3a2600f43f90d1e409f9661 Mon Sep 17 00:00:00 2001 From: Jacob Keller Date: Tue, 21 Nov 2023 13:12:56 -0800 Subject: ice: unify logic for programming PFINT_TSYN_MSK Commit d938a8cca88a ("ice: Auxbus devices & driver for E822 TS") modified how Tx timestamps are handled for E822 devices. On these devices, only the clock owner handles reading the Tx timestamp data from firmware. To do this, the PFINT_TSYN_MSK register is modified from the default value to one which enables reacting to a Tx timestamp on all PHY ports. The driver currently programs PFINT_TSYN_MSK in different places depending on whether the port is the clock owner or not. For the clock owner, the PFINT_TSYN_MSK value is programmed during ice_ptp_init_owner just before calling ice_ptp_tx_ena_intr to program the PHY ports. For the non-clock owner ports, the PFINT_TSYN_MSK is programmed during ice_ptp_init_port. If a large enough device reset occurs, the PFINT_TSYN_MSK register will be reset to the default value in which only the PHY associated directly with the PF will cause the Tx timestamp interrupt to trigger. The driver lacks logic to reprogram the PFINT_TSYN_MSK register after a device reset. For the E822 device, this results in the PF no longer responding to interrupts for other ports. This results in failure to deliver Tx timestamps to user space applications. Rename ice_ptp_configure_tx_tstamp to ice_ptp_cfg_tx_interrupt, and unify the logic for programming PFINT_TSYN_MSK and PFINT_OICR_ENA into one place. This function will program both registers according to the combination of user configuration and device requirements. This ensures that PFINT_TSYN_MSK is always restored when we configure the Tx timestamp interrupt. Fixes: d938a8cca88a ("ice: Auxbus devices & driver for E822 TS") Signed-off-by: Jacob Keller Reviewed-by: Jesse Brandeburg Reviewed-by: Simon Horman Tested-by: Pucha Himasekhar Reddy (A Contingent worker at Intel) Signed-off-by: Tony Nguyen Signed-off-by: Paolo Abeni --- drivers/net/ethernet/intel/ice/ice_ptp.c | 60 ++++++++++++++++++-------------- 1 file changed, 34 insertions(+), 26 deletions(-) diff --git a/drivers/net/ethernet/intel/ice/ice_ptp.c b/drivers/net/ethernet/intel/ice/ice_ptp.c index affd90622a68..624d05b4bbd9 100644 --- a/drivers/net/ethernet/intel/ice/ice_ptp.c +++ b/drivers/net/ethernet/intel/ice/ice_ptp.c @@ -256,21 +256,42 @@ ice_verify_pin_e810t(struct ptp_clock_info *info, unsigned int pin, } /** - * ice_ptp_configure_tx_tstamp - Enable or disable Tx timestamp interrupt - * @pf: The PF pointer to search in - * @on: bool value for whether timestamp interrupt is enabled or disabled + * ice_ptp_cfg_tx_interrupt - Configure Tx timestamp interrupt for the device + * @pf: Board private structure + * + * Program the device to respond appropriately to the Tx timestamp interrupt + * cause. */ -static void ice_ptp_configure_tx_tstamp(struct ice_pf *pf, bool on) +static void ice_ptp_cfg_tx_interrupt(struct ice_pf *pf) { + struct ice_hw *hw = &pf->hw; + bool enable; u32 val; + switch (pf->ptp.tx_interrupt_mode) { + case ICE_PTP_TX_INTERRUPT_ALL: + /* React to interrupts across all quads. */ + wr32(hw, PFINT_TSYN_MSK + (0x4 * hw->pf_id), (u32)0x1f); + enable = true; + break; + case ICE_PTP_TX_INTERRUPT_NONE: + /* Do not react to interrupts on any quad. */ + wr32(hw, PFINT_TSYN_MSK + (0x4 * hw->pf_id), (u32)0x0); + enable = false; + break; + case ICE_PTP_TX_INTERRUPT_SELF: + default: + enable = pf->ptp.tstamp_config.tx_type == HWTSTAMP_TX_ON; + break; + } + /* Configure the Tx timestamp interrupt */ - val = rd32(&pf->hw, PFINT_OICR_ENA); - if (on) + val = rd32(hw, PFINT_OICR_ENA); + if (enable) val |= PFINT_OICR_TSYN_TX_M; else val &= ~PFINT_OICR_TSYN_TX_M; - wr32(&pf->hw, PFINT_OICR_ENA, val); + wr32(hw, PFINT_OICR_ENA, val); } /** @@ -280,10 +301,9 @@ static void ice_ptp_configure_tx_tstamp(struct ice_pf *pf, bool on) */ static void ice_set_tx_tstamp(struct ice_pf *pf, bool on) { - if (pf->ptp.tx_interrupt_mode == ICE_PTP_TX_INTERRUPT_SELF) - ice_ptp_configure_tx_tstamp(pf, on); - pf->ptp.tstamp_config.tx_type = on ? HWTSTAMP_TX_ON : HWTSTAMP_TX_OFF; + + ice_ptp_cfg_tx_interrupt(pf); } /** @@ -2789,15 +2809,7 @@ static int ice_ptp_init_owner(struct ice_pf *pf) /* Release the global hardware lock */ ice_ptp_unlock(hw); - if (pf->ptp.tx_interrupt_mode == ICE_PTP_TX_INTERRUPT_ALL) { - /* The clock owner for this device type handles the timestamp - * interrupt for all ports. - */ - ice_ptp_configure_tx_tstamp(pf, true); - - /* React on all quads interrupts for E82x */ - wr32(hw, PFINT_TSYN_MSK + (0x4 * hw->pf_id), (u32)0x1f); - + if (!ice_is_e810(hw)) { /* Enable quad interrupts */ err = ice_ptp_tx_ena_intr(pf, true, itr); if (err) @@ -2867,13 +2879,6 @@ static int ice_ptp_init_port(struct ice_pf *pf, struct ice_ptp_port *ptp_port) case ICE_PHY_E810: return ice_ptp_init_tx_e810(pf, &ptp_port->tx); case ICE_PHY_E822: - /* Non-owner PFs don't react to any interrupts on E82x, - * neither on own quad nor on others - */ - if (!ice_ptp_pf_handles_tx_interrupt(pf)) { - ice_ptp_configure_tx_tstamp(pf, false); - wr32(hw, PFINT_TSYN_MSK + (0x4 * hw->pf_id), (u32)0x0); - } kthread_init_delayed_work(&ptp_port->ov_work, ice_ptp_wait_for_offsets); @@ -3018,6 +3023,9 @@ void ice_ptp_init(struct ice_pf *pf) /* Start the PHY timestamping block */ ice_ptp_reset_phy_timestamping(pf); + /* Configure initial Tx interrupt settings */ + ice_ptp_cfg_tx_interrupt(pf); + set_bit(ICE_FLAG_PTP, pf->flags); err = ice_ptp_init_work(pf, ptp); if (err) -- cgit v1.2.3 From 7758017911a4f2578d54c318e8fe77bcb5899054 Mon Sep 17 00:00:00 2001 From: Jacob Keller Date: Tue, 21 Nov 2023 13:12:57 -0800 Subject: ice: restore timestamp configuration after device reset The driver calls ice_ptp_cfg_timestamp() during ice_ptp_prepare_for_reset() to disable timestamping while the device is resetting. This operation destroys the user requested configuration. While the driver does call ice_ptp_cfg_timestamp in ice_rebuild() to restore some hardware settings after a reset, it unconditionally passes true or false, resulting in failure to restore previous user space configuration. This results in a device reset forcibly disabling timestamp configuration regardless of current user settings. This was not detected previously due to a quirk of the LinuxPTP ptp4l application. If ptp4l detects a missing timestamp, it enters a fault state and performs recovery logic which includes executing SIOCSHWTSTAMP again, restoring the now accidentally cleared configuration. Not every application does this, and for these applications, timestamps will mysteriously stop after a PF reset, without being restored until an application restart. Fix this by replacing ice_ptp_cfg_timestamp() with two new functions: 1) ice_ptp_disable_timestamp_mode() which unconditionally disables the timestamping logic in ice_ptp_prepare_for_reset() and ice_ptp_release() 2) ice_ptp_restore_timestamp_mode() which calls ice_ptp_restore_tx_interrupt() to restore Tx timestamping configuration, calls ice_set_rx_tstamp() to restore Rx timestamping configuration, and issues an immediate TSYN_TX interrupt to ensure that timestamps which may have occurred during the device reset get processed. Modify the ice_ptp_set_timestamp_mode to directly save the user configuration and then call ice_ptp_restore_timestamp_mode. This way, reset no longer destroys the saved user configuration. This obsoletes the ice_set_tx_tstamp() function which can now be safely removed. With this change, all devices should now restore Tx and Rx timestamping functionality correctly after a PF reset without application intervention. Fixes: 77a781155a65 ("ice: enable receive hardware timestamping") Fixes: ea9b847cda64 ("ice: enable transmit timestamps for E810 devices") Signed-off-by: Jacob Keller Reviewed-by: Jesse Brandeburg Reviewed-by: Simon Horman Tested-by: Pucha Himasekhar Reddy (A Contingent worker at Intel) Signed-off-by: Tony Nguyen Signed-off-by: Paolo Abeni --- drivers/net/ethernet/intel/ice/ice_main.c | 12 ++--- drivers/net/ethernet/intel/ice/ice_ptp.c | 74 +++++++++++++++++++------------ drivers/net/ethernet/intel/ice/ice_ptp.h | 5 +-- 3 files changed, 51 insertions(+), 40 deletions(-) diff --git a/drivers/net/ethernet/intel/ice/ice_main.c b/drivers/net/ethernet/intel/ice/ice_main.c index 6607fa6fe556..fb9c93f37e84 100644 --- a/drivers/net/ethernet/intel/ice/ice_main.c +++ b/drivers/net/ethernet/intel/ice/ice_main.c @@ -7401,15 +7401,6 @@ static void ice_rebuild(struct ice_pf *pf, enum ice_reset_req reset_type) goto err_vsi_rebuild; } - /* configure PTP timestamping after VSI rebuild */ - if (test_bit(ICE_FLAG_PTP_SUPPORTED, pf->flags)) { - if (pf->ptp.tx_interrupt_mode == ICE_PTP_TX_INTERRUPT_SELF) - ice_ptp_cfg_timestamp(pf, false); - else if (pf->ptp.tx_interrupt_mode == ICE_PTP_TX_INTERRUPT_ALL) - /* for E82x PHC owner always need to have interrupts */ - ice_ptp_cfg_timestamp(pf, true); - } - err = ice_vsi_rebuild_by_type(pf, ICE_VSI_SWITCHDEV_CTRL); if (err) { dev_err(dev, "Switchdev CTRL VSI rebuild failed: %d\n", err); @@ -7461,6 +7452,9 @@ static void ice_rebuild(struct ice_pf *pf, enum ice_reset_req reset_type) ice_plug_aux_dev(pf); if (ice_is_feature_supported(pf, ICE_F_SRIOV_LAG)) ice_lag_rebuild(pf); + + /* Restore timestamp mode settings after VSI rebuild */ + ice_ptp_restore_timestamp_mode(pf); return; err_vsi_rebuild: diff --git a/drivers/net/ethernet/intel/ice/ice_ptp.c b/drivers/net/ethernet/intel/ice/ice_ptp.c index 624d05b4bbd9..71f405f8a6fe 100644 --- a/drivers/net/ethernet/intel/ice/ice_ptp.c +++ b/drivers/net/ethernet/intel/ice/ice_ptp.c @@ -294,18 +294,6 @@ static void ice_ptp_cfg_tx_interrupt(struct ice_pf *pf) wr32(hw, PFINT_OICR_ENA, val); } -/** - * ice_set_tx_tstamp - Enable or disable Tx timestamping - * @pf: The PF pointer to search in - * @on: bool value for whether timestamps are enabled or disabled - */ -static void ice_set_tx_tstamp(struct ice_pf *pf, bool on) -{ - pf->ptp.tstamp_config.tx_type = on ? HWTSTAMP_TX_ON : HWTSTAMP_TX_OFF; - - ice_ptp_cfg_tx_interrupt(pf); -} - /** * ice_set_rx_tstamp - Enable or disable Rx timestamping * @pf: The PF pointer to search in @@ -317,7 +305,7 @@ static void ice_set_rx_tstamp(struct ice_pf *pf, bool on) u16 i; vsi = ice_get_main_vsi(pf); - if (!vsi) + if (!vsi || !vsi->rx_rings) return; /* Set the timestamp flag for all the Rx rings */ @@ -326,23 +314,50 @@ static void ice_set_rx_tstamp(struct ice_pf *pf, bool on) continue; vsi->rx_rings[i]->ptp_rx = on; } +} + +/** + * ice_ptp_disable_timestamp_mode - Disable current timestamp mode + * @pf: Board private structure + * + * Called during preparation for reset to temporarily disable timestamping on + * the device. Called during remove to disable timestamping while cleaning up + * driver resources. + */ +static void ice_ptp_disable_timestamp_mode(struct ice_pf *pf) +{ + struct ice_hw *hw = &pf->hw; + u32 val; + + val = rd32(hw, PFINT_OICR_ENA); + val &= ~PFINT_OICR_TSYN_TX_M; + wr32(hw, PFINT_OICR_ENA, val); - pf->ptp.tstamp_config.rx_filter = on ? HWTSTAMP_FILTER_ALL : - HWTSTAMP_FILTER_NONE; + ice_set_rx_tstamp(pf, false); } /** - * ice_ptp_cfg_timestamp - Configure timestamp for init/deinit + * ice_ptp_restore_timestamp_mode - Restore timestamp configuration * @pf: Board private structure - * @ena: bool value to enable or disable time stamp * - * This function will configure timestamping during PTP initialization - * and deinitialization + * Called at the end of rebuild to restore timestamp configuration after + * a device reset. */ -void ice_ptp_cfg_timestamp(struct ice_pf *pf, bool ena) +void ice_ptp_restore_timestamp_mode(struct ice_pf *pf) { - ice_set_tx_tstamp(pf, ena); - ice_set_rx_tstamp(pf, ena); + struct ice_hw *hw = &pf->hw; + bool enable_rx; + + ice_ptp_cfg_tx_interrupt(pf); + + enable_rx = pf->ptp.tstamp_config.rx_filter == HWTSTAMP_FILTER_ALL; + ice_set_rx_tstamp(pf, enable_rx); + + /* Trigger an immediate software interrupt to ensure that timestamps + * which occurred during reset are handled now. + */ + wr32(hw, PFINT_OICR, PFINT_OICR_TSYN_TX_M); + ice_flush(hw); } /** @@ -2043,10 +2058,10 @@ ice_ptp_set_timestamp_mode(struct ice_pf *pf, struct hwtstamp_config *config) { switch (config->tx_type) { case HWTSTAMP_TX_OFF: - ice_set_tx_tstamp(pf, false); + pf->ptp.tstamp_config.tx_type = HWTSTAMP_TX_OFF; break; case HWTSTAMP_TX_ON: - ice_set_tx_tstamp(pf, true); + pf->ptp.tstamp_config.tx_type = HWTSTAMP_TX_ON; break; default: return -ERANGE; @@ -2054,7 +2069,7 @@ ice_ptp_set_timestamp_mode(struct ice_pf *pf, struct hwtstamp_config *config) switch (config->rx_filter) { case HWTSTAMP_FILTER_NONE: - ice_set_rx_tstamp(pf, false); + pf->ptp.tstamp_config.rx_filter = HWTSTAMP_FILTER_NONE; break; case HWTSTAMP_FILTER_PTP_V1_L4_EVENT: case HWTSTAMP_FILTER_PTP_V1_L4_SYNC: @@ -2070,12 +2085,15 @@ ice_ptp_set_timestamp_mode(struct ice_pf *pf, struct hwtstamp_config *config) case HWTSTAMP_FILTER_PTP_V2_L4_DELAY_REQ: case HWTSTAMP_FILTER_NTP_ALL: case HWTSTAMP_FILTER_ALL: - ice_set_rx_tstamp(pf, true); + pf->ptp.tstamp_config.rx_filter = HWTSTAMP_FILTER_ALL; break; default: return -ERANGE; } + /* Immediately update the device timestamping mode */ + ice_ptp_restore_timestamp_mode(pf); + return 0; } @@ -2743,7 +2761,7 @@ void ice_ptp_prepare_for_reset(struct ice_pf *pf) clear_bit(ICE_FLAG_PTP, pf->flags); /* Disable timestamping for both Tx and Rx */ - ice_ptp_cfg_timestamp(pf, false); + ice_ptp_disable_timestamp_mode(pf); kthread_cancel_delayed_work_sync(&ptp->work); @@ -3061,7 +3079,7 @@ void ice_ptp_release(struct ice_pf *pf) return; /* Disable timestamping for both Tx and Rx */ - ice_ptp_cfg_timestamp(pf, false); + ice_ptp_disable_timestamp_mode(pf); ice_ptp_remove_auxbus_device(pf); diff --git a/drivers/net/ethernet/intel/ice/ice_ptp.h b/drivers/net/ethernet/intel/ice/ice_ptp.h index 8f6f94392756..06a330867fc9 100644 --- a/drivers/net/ethernet/intel/ice/ice_ptp.h +++ b/drivers/net/ethernet/intel/ice/ice_ptp.h @@ -292,7 +292,7 @@ int ice_ptp_clock_index(struct ice_pf *pf); struct ice_pf; int ice_ptp_set_ts_config(struct ice_pf *pf, struct ifreq *ifr); int ice_ptp_get_ts_config(struct ice_pf *pf, struct ifreq *ifr); -void ice_ptp_cfg_timestamp(struct ice_pf *pf, bool ena); +void ice_ptp_restore_timestamp_mode(struct ice_pf *pf); void ice_ptp_extts_event(struct ice_pf *pf); s8 ice_ptp_request_ts(struct ice_ptp_tx *tx, struct sk_buff *skb); @@ -317,8 +317,7 @@ static inline int ice_ptp_get_ts_config(struct ice_pf *pf, struct ifreq *ifr) return -EOPNOTSUPP; } -static inline void ice_ptp_cfg_timestamp(struct ice_pf *pf, bool ena) { } - +static inline void ice_ptp_restore_timestamp_mode(struct ice_pf *pf) { } static inline void ice_ptp_extts_event(struct ice_pf *pf) { } static inline s8 ice_ptp_request_ts(struct ice_ptp_tx *tx, struct sk_buff *skb) -- cgit v1.2.3 From 9aa6a662c309e6f8770972840948af963bd6ff34 Mon Sep 17 00:00:00 2001 From: AngeloGioacchino Del Regno Date: Wed, 25 Oct 2023 12:49:40 +0200 Subject: drm/mediatek: mtk_disp_gamma: Fix breakage due to merge issue While the commit that was sent to the mailing lists was fine, something happened during merge and the mtk_gamma_set() function got broken as a writel() was turned into a readl(). Fix that by changing that back to the expected writel(). Fixes: a6b39cd248f3 ("drm/mediatek: De-commonize disp_aal/disp_gamma gamma_set functions") Signed-off-by: AngeloGioacchino Del Regno Link: https://patchwork.kernel.org/project/dri-devel/patch/20231025104940.140605-1-angelogioacchino.delregno@collabora.com/ Signed-off-by: Chun-Kuang Hu --- drivers/gpu/drm/mediatek/mtk_disp_gamma.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/mediatek/mtk_disp_gamma.c b/drivers/gpu/drm/mediatek/mtk_disp_gamma.c index f81dc34c9c3e..c1bc8b00d938 100644 --- a/drivers/gpu/drm/mediatek/mtk_disp_gamma.c +++ b/drivers/gpu/drm/mediatek/mtk_disp_gamma.c @@ -203,7 +203,7 @@ void mtk_gamma_set(struct device *dev, struct drm_crtc_state *state) /* Disable RELAY mode to pass the processed image */ cfg_val &= ~GAMMA_RELAY_MODE; - cfg_val = readl(gamma->regs + DISP_GAMMA_CFG); + writel(cfg_val, gamma->regs + DISP_GAMMA_CFG); } void mtk_gamma_config(struct device *dev, unsigned int w, -- cgit v1.2.3 From 4662817aed5a9d6c695658d0105d8ff4b84ac6cb Mon Sep 17 00:00:00 2001 From: Michael Walle Date: Tue, 5 Sep 2023 10:49:21 +0200 Subject: drm/mediatek: fix kernel oops if no crtc is found MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit drm_crtc_from_index(0) might return NULL if there are no CRTCs registered at all which will lead to a kernel oops in mtk_drm_crtc_dma_dev_get(). Add the missing return value check. Fixes: 0d9eee9118b7 ("drm/mediatek: Add drm ovl_adaptor sub driver for MT8195") Signed-off-by: Michael Walle Reviewed-by: Nícolas F. R. A. Prado Tested-by: Nícolas F. R. A. Prado Reviewed-by: AngeloGioacchino Del Regno Tested-by: Eugen Hristev Reviewed-by: Eugen Hristev Link: https://patchwork.kernel.org/project/dri-devel/patch/20230905084922.3908121-1-mwalle@kernel.org/ Signed-off-by: Chun-Kuang Hu --- drivers/gpu/drm/mediatek/mtk_drm_drv.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/mediatek/mtk_drm_drv.c b/drivers/gpu/drm/mediatek/mtk_drm_drv.c index 2dfaa613276a..2b0c35cacbc6 100644 --- a/drivers/gpu/drm/mediatek/mtk_drm_drv.c +++ b/drivers/gpu/drm/mediatek/mtk_drm_drv.c @@ -443,6 +443,7 @@ static int mtk_drm_kms_init(struct drm_device *drm) struct mtk_drm_private *private = drm->dev_private; struct mtk_drm_private *priv_n; struct device *dma_dev = NULL; + struct drm_crtc *crtc; int ret, i, j; if (drm_firmware_drivers_only()) @@ -519,7 +520,9 @@ static int mtk_drm_kms_init(struct drm_device *drm) } /* Use OVL device for all DMA memory allocations */ - dma_dev = mtk_drm_crtc_dma_dev_get(drm_crtc_from_index(drm, 0)); + crtc = drm_crtc_from_index(drm, 0); + if (crtc) + dma_dev = mtk_drm_crtc_dma_dev_get(crtc); if (!dma_dev) { ret = -ENODEV; dev_err(drm->dev, "Need at least one OVL device\n"); -- cgit v1.2.3 From 4e20655e503e3a478cd1682bf25e3202dd823da8 Mon Sep 17 00:00:00 2001 From: Ivan Vecera Date: Tue, 21 Nov 2023 13:13:36 -0800 Subject: i40e: Fix adding unsupported cloud filters If a VF tries to add unsupported cloud filter through virtchnl then i40e_add_del_cloud_filter(_big_buf) returns -ENOTSUPP but this error code is stored in 'ret' instead of 'aq_ret' that is used as error code sent back to VF. In this scenario where one of the mentioned functions fails the value of 'aq_ret' is zero so the VF will incorrectly receive a 'success'. Use 'aq_ret' to store return value and remove 'ret' local variable. Additionally fix the issue when filter allocation fails, in this case no notification is sent back to the VF. Fixes: e284fc280473 ("i40e: Add and delete cloud filter") Reviewed-by: Simon Horman Signed-off-by: Ivan Vecera Tested-by: Rafal Romanowski Signed-off-by: Tony Nguyen Link: https://lore.kernel.org/r/20231121211338.3348677-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c | 16 +++++++++------- 1 file changed, 9 insertions(+), 7 deletions(-) diff --git a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c index 08d7edccfb8d..3f99eb198245 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c +++ b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c @@ -3844,7 +3844,7 @@ static int i40e_vc_add_cloud_filter(struct i40e_vf *vf, u8 *msg) struct i40e_pf *pf = vf->pf; struct i40e_vsi *vsi = NULL; int aq_ret = 0; - int i, ret; + int i; if (!i40e_sync_vf_state(vf, I40E_VF_STATE_ACTIVE)) { aq_ret = -EINVAL; @@ -3868,8 +3868,10 @@ static int i40e_vc_add_cloud_filter(struct i40e_vf *vf, u8 *msg) } cfilter = kzalloc(sizeof(*cfilter), GFP_KERNEL); - if (!cfilter) - return -ENOMEM; + if (!cfilter) { + aq_ret = -ENOMEM; + goto err_out; + } /* parse destination mac address */ for (i = 0; i < ETH_ALEN; i++) @@ -3917,13 +3919,13 @@ static int i40e_vc_add_cloud_filter(struct i40e_vf *vf, u8 *msg) /* Adding cloud filter programmed as TC filter */ if (tcf.dst_port) - ret = i40e_add_del_cloud_filter_big_buf(vsi, cfilter, true); + aq_ret = i40e_add_del_cloud_filter_big_buf(vsi, cfilter, true); else - ret = i40e_add_del_cloud_filter(vsi, cfilter, true); - if (ret) { + aq_ret = i40e_add_del_cloud_filter(vsi, cfilter, true); + if (aq_ret) { dev_err(&pf->pdev->dev, "VF %d: Failed to add cloud filter, err %pe aq_err %s\n", - vf->vf_id, ERR_PTR(ret), + vf->vf_id, ERR_PTR(aq_ret), i40e_aq_str(&pf->hw, pf->hw.aq.asq_last_status)); goto err_free; } -- cgit v1.2.3 From f0863888f6cfef33e3117dccfe94fa78edf76be4 Mon Sep 17 00:00:00 2001 From: Arseniy Krasnov Date: Wed, 22 Nov 2023 00:16:42 +0300 Subject: vsock/test: fix SEQPACKET message bounds test Tune message length calculation to make this test work on machines where 'getpagesize()' returns >32KB. Now maximum message length is not hardcoded (on machines above it was smaller than 'getpagesize()' return value, thus we get negative value and test fails), but calculated at runtime and always bigger than 'getpagesize()' result. Reproduced on aarch64 with 64KB page size. Fixes: 5c338112e48a ("test/vsock: rework message bounds test") Signed-off-by: Arseniy Krasnov Reported-by: Bogdan Marcynkov Reviewed-by: Stefano Garzarella Link: https://lore.kernel.org/r/20231121211642.163474-1-avkrasnov@salutedevices.com Signed-off-by: Jakub Kicinski --- tools/testing/vsock/vsock_test.c | 19 +++++++++++++------ 1 file changed, 13 insertions(+), 6 deletions(-) diff --git a/tools/testing/vsock/vsock_test.c b/tools/testing/vsock/vsock_test.c index 5b0e93f9996c..01fa816868bc 100644 --- a/tools/testing/vsock/vsock_test.c +++ b/tools/testing/vsock/vsock_test.c @@ -353,11 +353,12 @@ static void test_stream_msg_peek_server(const struct test_opts *opts) } #define SOCK_BUF_SIZE (2 * 1024 * 1024) -#define MAX_MSG_SIZE (32 * 1024) +#define MAX_MSG_PAGES 4 static void test_seqpacket_msg_bounds_client(const struct test_opts *opts) { unsigned long curr_hash; + size_t max_msg_size; int page_size; int msg_count; int fd; @@ -373,7 +374,8 @@ static void test_seqpacket_msg_bounds_client(const struct test_opts *opts) curr_hash = 0; page_size = getpagesize(); - msg_count = SOCK_BUF_SIZE / MAX_MSG_SIZE; + max_msg_size = MAX_MSG_PAGES * page_size; + msg_count = SOCK_BUF_SIZE / max_msg_size; for (int i = 0; i < msg_count; i++) { size_t buf_size; @@ -383,7 +385,7 @@ static void test_seqpacket_msg_bounds_client(const struct test_opts *opts) /* Use "small" buffers and "big" buffers. */ if (i & 1) buf_size = page_size + - (rand() % (MAX_MSG_SIZE - page_size)); + (rand() % (max_msg_size - page_size)); else buf_size = 1 + (rand() % page_size); @@ -429,7 +431,6 @@ static void test_seqpacket_msg_bounds_server(const struct test_opts *opts) unsigned long remote_hash; unsigned long curr_hash; int fd; - char buf[MAX_MSG_SIZE]; struct msghdr msg = {0}; struct iovec iov = {0}; @@ -457,8 +458,13 @@ static void test_seqpacket_msg_bounds_server(const struct test_opts *opts) control_writeln("SRVREADY"); /* Wait, until peer sends whole data. */ control_expectln("SENDDONE"); - iov.iov_base = buf; - iov.iov_len = sizeof(buf); + iov.iov_len = MAX_MSG_PAGES * getpagesize(); + iov.iov_base = malloc(iov.iov_len); + if (!iov.iov_base) { + perror("malloc"); + exit(EXIT_FAILURE); + } + msg.msg_iov = &iov; msg.msg_iovlen = 1; @@ -483,6 +489,7 @@ static void test_seqpacket_msg_bounds_server(const struct test_opts *opts) curr_hash += hash_djb2(msg.msg_iov[0].iov_base, recv_size); } + free(iov.iov_base); close(fd); remote_hash = control_readulong(); -- cgit v1.2.3 From fd0413bbf8b11f56e8aa842783b0deda0dfe2926 Mon Sep 17 00:00:00 2001 From: Samuel Holland Date: Tue, 21 Nov 2023 16:42:17 -0800 Subject: net: axienet: Fix check for partial TX checksum Due to a typo, the code checked the RX checksum feature in the TX path. Fixes: 8a3b7a252dca ("drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver") Signed-off-by: Samuel Holland Reviewed-by: Andrew Lunn Reviewed-by: Radhey Shyam Pandey Link: https://lore.kernel.org/r/20231122004219.3504219-1-samuel.holland@sifive.com Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/xilinx/xilinx_axienet_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c index 82d0d44b2b02..bf6e33990490 100644 --- a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c +++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c @@ -822,7 +822,7 @@ axienet_start_xmit(struct sk_buff *skb, struct net_device *ndev) if (lp->features & XAE_FEATURE_FULL_TX_CSUM) { /* Tx Full Checksum Offload Enabled */ cur_p->app0 |= 2; - } else if (lp->features & XAE_FEATURE_PARTIAL_RX_CSUM) { + } else if (lp->features & XAE_FEATURE_PARTIAL_TX_CSUM) { csum_start_off = skb_transport_offset(skb); csum_index_off = csum_start_off + skb->csum_offset; /* Tx Partial Checksum Offload Enabled */ -- cgit v1.2.3 From 53f2cb491b500897a619ff6abd72f565933760f0 Mon Sep 17 00:00:00 2001 From: Jann Horn Date: Wed, 22 Nov 2023 22:44:47 +0100 Subject: tls: fix NULL deref on tls_sw_splice_eof() with empty record syzkaller discovered that if tls_sw_splice_eof() is executed as part of sendfile() when the plaintext/ciphertext sk_msg are empty, the send path gets confused because the empty ciphertext buffer does not have enough space for the encryption overhead. This causes tls_push_record() to go on the `split = true` path (which is only supposed to be used when interacting with an attached BPF program), and then get further confused and hit the tls_merge_open_record() path, which then assumes that there must be at least one populated buffer element, leading to a NULL deref. It is possible to have empty plaintext/ciphertext buffers if we previously bailed from tls_sw_sendmsg_locked() via the tls_trim_both_msgs() path. tls_sw_push_pending_record() already handles this case correctly; let's do the same check in tls_sw_splice_eof(). Fixes: df720d288dbb ("tls/sw: Use splice_eof() to flush") Cc: stable@vger.kernel.org Reported-by: syzbot+40d43509a099ea756317@syzkaller.appspotmail.com Signed-off-by: Jann Horn Link: https://lore.kernel.org/r/20231122214447.675768-1-jannh@google.com Signed-off-by: Jakub Kicinski --- net/tls/tls_sw.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/net/tls/tls_sw.c b/net/tls/tls_sw.c index a78e8e722409..316f76187962 100644 --- a/net/tls/tls_sw.c +++ b/net/tls/tls_sw.c @@ -1232,11 +1232,14 @@ void tls_sw_splice_eof(struct socket *sock) lock_sock(sk); retry: + /* same checks as in tls_sw_push_pending_record() */ rec = ctx->open_rec; if (!rec) goto unlock; msg_pl = &rec->msg_plaintext; + if (msg_pl->sg.size == 0) + goto unlock; /* Check the BPF advisor and perform transmission. */ ret = bpf_exec_tx_verdict(msg_pl, sk, false, TLS_RECORD_TYPE_DATA, -- cgit v1.2.3 From 37f0205538baf70beb57cdcb6c7d14aa13257926 Mon Sep 17 00:00:00 2001 From: Alex Elder Date: Wed, 22 Nov 2023 17:17:08 -0600 Subject: net: ipa: fix one GSI register field width The width of the R_LENGTH field of the EV_CH_E_CNTXT_1 GSI register is 24 bits (not 20 bits) starting with IPA v5.0. Fix this. Fixes: faf0678ec8a0 ("net: ipa: add IPA v5.0 GSI register definitions") Signed-off-by: Alex Elder Link: https://lore.kernel.org/r/20231122231708.896632-1-elder@linaro.org Signed-off-by: Jakub Kicinski --- drivers/net/ipa/reg/gsi_reg-v5.0.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ipa/reg/gsi_reg-v5.0.c b/drivers/net/ipa/reg/gsi_reg-v5.0.c index d7b81a36d673..145eb0bd096d 100644 --- a/drivers/net/ipa/reg/gsi_reg-v5.0.c +++ b/drivers/net/ipa/reg/gsi_reg-v5.0.c @@ -78,7 +78,7 @@ REG_STRIDE_FIELDS(EV_CH_E_CNTXT_0, ev_ch_e_cntxt_0, 0x0001c000 + 0x12000 * GSI_EE_AP, 0x80); static const u32 reg_ev_ch_e_cntxt_1_fmask[] = { - [R_LENGTH] = GENMASK(19, 0), + [R_LENGTH] = GENMASK(23, 0), }; REG_STRIDE_FIELDS(EV_CH_E_CNTXT_1, ev_ch_e_cntxt_1, -- cgit v1.2.3 From 2be35a619482c1f4e5bc7a2d84049b8d7d171882 Mon Sep 17 00:00:00 2001 From: Jakub Kicinski Date: Wed, 22 Nov 2023 19:06:24 -0800 Subject: tools: ynl: fix header path for nfsd The makefile dependency is trying to include the wrong header: : fatal error: ../../../../include/uapi//linux/nfsd.h: No such file or directory The guard also looks wrong. Fixes: f14122b2c2ac ("tools: ynl: Add source files for nfsd netlink protocol") Reviewed-by: Chuck Lever Link: https://lore.kernel.org/r/20231123030624.1611925-1-kuba@kernel.org Signed-off-by: Jakub Kicinski --- tools/net/ynl/Makefile.deps | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/net/ynl/Makefile.deps b/tools/net/ynl/Makefile.deps index 64d139400db1..3110f84dd029 100644 --- a/tools/net/ynl/Makefile.deps +++ b/tools/net/ynl/Makefile.deps @@ -18,4 +18,4 @@ CFLAGS_devlink:=$(call get_hdr_inc,_LINUX_DEVLINK_H_,devlink.h) CFLAGS_ethtool:=$(call get_hdr_inc,_LINUX_ETHTOOL_NETLINK_H_,ethtool_netlink.h) CFLAGS_handshake:=$(call get_hdr_inc,_LINUX_HANDSHAKE_H,handshake.h) CFLAGS_netdev:=$(call get_hdr_inc,_LINUX_NETDEV_H,netdev.h) -CFLAGS_nfsd:=$(call get_hdr_inc,_LINUX_NFSD_H,nfsd.h) +CFLAGS_nfsd:=$(call get_hdr_inc,_LINUX_NFSD_NETLINK_H,nfsd_netlink.h) -- cgit v1.2.3 From 39f04b1406b23fcc129a67e70d6205d5a7322f38 Mon Sep 17 00:00:00 2001 From: Jakub Kicinski Date: Wed, 22 Nov 2023 19:05:58 -0800 Subject: tools: ynl: fix duplicate op name in devlink MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit We don't support CRUD-inspired message types in YNL too well. One aspect that currently trips us up is the fact that single message ID can be used in multiple commands (as the response). This leads to duplicate entries in the id-to-string tables: devlink-user.c:19:34: warning: initialized field overwritten [-Woverride-init] 19 | [DEVLINK_CMD_PORT_NEW] = "port-new", | ^~~~~~~~~~ devlink-user.c:19:34: note: (near initialization for ‘devlink_op_strmap[7]’) Fixes tag points at where the code was generated, the "real" problem is that the code generator does not support CRUD. Fixes: f2f9dd164db0 ("netlink: specs: devlink: add the remaining command to generate complete split_ops") Link: https://lore.kernel.org/r/20231123030558.1611831-1-kuba@kernel.org Signed-off-by: Jakub Kicinski --- tools/net/ynl/generated/devlink-user.c | 2 +- tools/net/ynl/ynl-gen-c.py | 6 ++++++ 2 files changed, 7 insertions(+), 1 deletion(-) diff --git a/tools/net/ynl/generated/devlink-user.c b/tools/net/ynl/generated/devlink-user.c index bc5065bd99b2..c12ca87ca2bb 100644 --- a/tools/net/ynl/generated/devlink-user.c +++ b/tools/net/ynl/generated/devlink-user.c @@ -15,7 +15,7 @@ /* Enums */ static const char * const devlink_op_strmap[] = { [3] = "get", - [7] = "port-get", + // skip "port-get", duplicate reply value [DEVLINK_CMD_PORT_NEW] = "port-new", [13] = "sb-get", [17] = "sb-pool-get", diff --git a/tools/net/ynl/ynl-gen-c.py b/tools/net/ynl/ynl-gen-c.py index c4003a83cd5d..3bd6b928c14f 100755 --- a/tools/net/ynl/ynl-gen-c.py +++ b/tools/net/ynl/ynl-gen-c.py @@ -1505,6 +1505,12 @@ def put_op_name(family, cw): cw.block_start(line=f"static const char * const {map_name}[] =") for op_name, op in family.msgs.items(): if op.rsp_value: + # Make sure we don't add duplicated entries, if multiple commands + # produce the same response in legacy families. + if family.rsp_by_value[op.rsp_value] != op: + cw.p(f'// skip "{op_name}", duplicate reply value') + continue + if op.req_value == op.rsp_value: cw.p(f'[{op.enum_name}] = "{op_name}",') else: -- cgit v1.2.3 From d9ed644f58670865cf067351deb71010bd87a52f Mon Sep 17 00:00:00 2001 From: Kornel Dulęba Date: Tue, 14 Nov 2023 11:54:49 +0000 Subject: mmc: sdhci-pci-gli: Disable LPM during initialization MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit To address IO performance commit f9e5b33934ce ("mmc: host: Improve I/O read/write performance for GL9763E") limited LPM negotiation to runtime suspend state. The problem is that it only flips the switch in the runtime PM resume/suspend logic. Disable LPM negotiation in gl9763e_add_host. This helps in two ways: 1. It was found that the LPM switch stays in the same position after warm reboot. Having it set in init helps with consistency. 2. Disabling LPM during the first runtime resume leaves us susceptible to the performance issue in the time window between boot and the first runtime suspend. Fixes: f9e5b33934ce ("mmc: host: Improve I/O read/write performance for GL9763E") Cc: stable@vger.kernel.org Signed-off-by: Kornel Dulęba Reviewed-by: Sven van Ashbrook Acked-by: Adrian Hunter Link: https://lore.kernel.org/r/20231114115516.1585361-1-korneld@chromium.org Signed-off-by: Ulf Hansson --- drivers/mmc/host/sdhci-pci-gli.c | 54 +++++++++++++++++++++------------------- 1 file changed, 29 insertions(+), 25 deletions(-) diff --git a/drivers/mmc/host/sdhci-pci-gli.c b/drivers/mmc/host/sdhci-pci-gli.c index d8a991b349a8..77911a57b12c 100644 --- a/drivers/mmc/host/sdhci-pci-gli.c +++ b/drivers/mmc/host/sdhci-pci-gli.c @@ -1189,6 +1189,32 @@ static void gl9763e_hs400_enhanced_strobe(struct mmc_host *mmc, sdhci_writel(host, val, SDHCI_GLI_9763E_HS400_ES_REG); } +static void gl9763e_set_low_power_negotiation(struct sdhci_pci_slot *slot, + bool enable) +{ + struct pci_dev *pdev = slot->chip->pdev; + u32 value; + + pci_read_config_dword(pdev, PCIE_GLI_9763E_VHS, &value); + value &= ~GLI_9763E_VHS_REV; + value |= FIELD_PREP(GLI_9763E_VHS_REV, GLI_9763E_VHS_REV_W); + pci_write_config_dword(pdev, PCIE_GLI_9763E_VHS, value); + + pci_read_config_dword(pdev, PCIE_GLI_9763E_CFG, &value); + + if (enable) + value &= ~GLI_9763E_CFG_LPSN_DIS; + else + value |= GLI_9763E_CFG_LPSN_DIS; + + pci_write_config_dword(pdev, PCIE_GLI_9763E_CFG, value); + + pci_read_config_dword(pdev, PCIE_GLI_9763E_VHS, &value); + value &= ~GLI_9763E_VHS_REV; + value |= FIELD_PREP(GLI_9763E_VHS_REV, GLI_9763E_VHS_REV_R); + pci_write_config_dword(pdev, PCIE_GLI_9763E_VHS, value); +} + static void sdhci_set_gl9763e_signaling(struct sdhci_host *host, unsigned int timing) { @@ -1297,6 +1323,9 @@ static int gl9763e_add_host(struct sdhci_pci_slot *slot) if (ret) goto cleanup; + /* Disable LPM negotiation to avoid entering L1 state. */ + gl9763e_set_low_power_negotiation(slot, false); + return 0; cleanup: @@ -1340,31 +1369,6 @@ static void gli_set_gl9763e(struct sdhci_pci_slot *slot) } #ifdef CONFIG_PM -static void gl9763e_set_low_power_negotiation(struct sdhci_pci_slot *slot, bool enable) -{ - struct pci_dev *pdev = slot->chip->pdev; - u32 value; - - pci_read_config_dword(pdev, PCIE_GLI_9763E_VHS, &value); - value &= ~GLI_9763E_VHS_REV; - value |= FIELD_PREP(GLI_9763E_VHS_REV, GLI_9763E_VHS_REV_W); - pci_write_config_dword(pdev, PCIE_GLI_9763E_VHS, value); - - pci_read_config_dword(pdev, PCIE_GLI_9763E_CFG, &value); - - if (enable) - value &= ~GLI_9763E_CFG_LPSN_DIS; - else - value |= GLI_9763E_CFG_LPSN_DIS; - - pci_write_config_dword(pdev, PCIE_GLI_9763E_CFG, value); - - pci_read_config_dword(pdev, PCIE_GLI_9763E_VHS, &value); - value &= ~GLI_9763E_VHS_REV; - value |= FIELD_PREP(GLI_9763E_VHS_REV, GLI_9763E_VHS_REV_R); - pci_write_config_dword(pdev, PCIE_GLI_9763E_VHS, value); -} - static int gl9763e_runtime_suspend(struct sdhci_pci_chip *chip) { struct sdhci_pci_slot *slot = chip->slots[0]; -- cgit v1.2.3 From 477865af60b2117ceaa1d558e03559108c15c78c Mon Sep 17 00:00:00 2001 From: Wenchao Chen Date: Wed, 15 Nov 2023 16:34:06 +0800 Subject: mmc: sdhci-sprd: Fix vqmmc not shutting down after the card was pulled With cat regulator_summary, we found that vqmmc was not shutting down after the card was pulled. cat /sys/kernel/debug/regulator/regulator_summary 1.before fix 1)Insert SD card vddsdio 1 1 0 unknown 3500mV 0mA 1200mV 3750mV 71100000.mmc-vqmmc 1 0mA 3500mV 3600mV 2)Pull out the SD card vddsdio 1 1 0 unknown 3500mV 0mA 1200mV 3750mV 71100000.mmc-vqmmc 1 0mA 3500mV 3600mV 2.after fix 1)Insert SD cardt vddsdio 1 1 0 unknown 3500mV 0mA 1200mV 3750mV 71100000.mmc-vqmmc 1 0mA 3500mV 3600mV 2)Pull out the SD card vddsdio 0 1 0 unknown 3500mV 0mA 1200mV 3750mV 71100000.mmc-vqmmc 0 0mA 3500mV 3600mV Fixes: fb8bd90f83c4 ("mmc: sdhci-sprd: Add Spreadtrum's initial host controller") Signed-off-by: Wenchao Chen Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20231115083406.7368-1-wenchao.chen@unisoc.com Signed-off-by: Ulf Hansson --- drivers/mmc/host/sdhci-sprd.c | 25 +++++++++++++++++++++++++ 1 file changed, 25 insertions(+) diff --git a/drivers/mmc/host/sdhci-sprd.c b/drivers/mmc/host/sdhci-sprd.c index 6b84ba27e6ab..6b8a57e2d20f 100644 --- a/drivers/mmc/host/sdhci-sprd.c +++ b/drivers/mmc/host/sdhci-sprd.c @@ -416,12 +416,33 @@ static void sdhci_sprd_request_done(struct sdhci_host *host, mmc_request_done(host->mmc, mrq); } +static void sdhci_sprd_set_power(struct sdhci_host *host, unsigned char mode, + unsigned short vdd) +{ + struct mmc_host *mmc = host->mmc; + + switch (mode) { + case MMC_POWER_OFF: + mmc_regulator_set_ocr(host->mmc, mmc->supply.vmmc, 0); + + mmc_regulator_disable_vqmmc(mmc); + break; + case MMC_POWER_ON: + mmc_regulator_enable_vqmmc(mmc); + break; + case MMC_POWER_UP: + mmc_regulator_set_ocr(host->mmc, mmc->supply.vmmc, vdd); + break; + } +} + static struct sdhci_ops sdhci_sprd_ops = { .read_l = sdhci_sprd_readl, .write_l = sdhci_sprd_writel, .write_w = sdhci_sprd_writew, .write_b = sdhci_sprd_writeb, .set_clock = sdhci_sprd_set_clock, + .set_power = sdhci_sprd_set_power, .get_max_clock = sdhci_sprd_get_max_clock, .get_min_clock = sdhci_sprd_get_min_clock, .set_bus_width = sdhci_set_bus_width, @@ -823,6 +844,10 @@ static int sdhci_sprd_probe(struct platform_device *pdev) host->caps1 &= ~(SDHCI_SUPPORT_SDR50 | SDHCI_SUPPORT_SDR104 | SDHCI_SUPPORT_DDR50); + ret = mmc_regulator_get_supply(host->mmc); + if (ret) + goto pm_runtime_disable; + ret = sdhci_setup_host(host); if (ret) goto pm_runtime_disable; -- cgit v1.2.3 From da90e45d5afc4da2de7cd3ea7943d0f1baa47cc2 Mon Sep 17 00:00:00 2001 From: Asuna Yang Date: Wed, 22 Nov 2023 22:18:03 +0800 Subject: USB: serial: option: add Luat Air72*U series products Update the USB serial option driver support for Luat Air72*U series products. ID 1782:4e00 Spreadtrum Communications Inc. UNISOC-8910 T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 13 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1782 ProdID=4e00 Rev=00.00 S: Manufacturer=UNISOC S: Product=UNISOC-8910 C: #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=400mA I: If#= 0 Alt= 0 #EPs= 1 Cls=e0(wlcon) Sub=01 Prot=03 Driver=rndis_host E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=4096ms I: If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms If#= 2: AT If#= 3: PPP + AT If#= 4: Debug Co-developed-by: Yangyu Chen Signed-off-by: Yangyu Chen Signed-off-by: Asuna Yang Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold --- drivers/usb/serial/option.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 06b9b04c022a..4dffcfefd62d 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -609,6 +609,8 @@ static void option_instat_callback(struct urb *urb); #define UNISOC_VENDOR_ID 0x1782 /* TOZED LT70-C based on UNISOC SL8563 uses UNISOC's vendor ID */ #define TOZED_PRODUCT_LT70C 0x4055 +/* Luat Air72*U series based on UNISOC UIS8910 uses UNISOC's vendor ID */ +#define LUAT_PRODUCT_AIR720U 0x4e00 /* Device flags */ @@ -2273,6 +2275,7 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(SIERRA_VENDOR_ID, SIERRA_PRODUCT_EM9191, 0xff, 0xff, 0x40) }, { USB_DEVICE_AND_INTERFACE_INFO(SIERRA_VENDOR_ID, SIERRA_PRODUCT_EM9191, 0xff, 0, 0) }, { USB_DEVICE_AND_INTERFACE_INFO(UNISOC_VENDOR_ID, TOZED_PRODUCT_LT70C, 0xff, 0, 0) }, + { USB_DEVICE_AND_INTERFACE_INFO(UNISOC_VENDOR_ID, LUAT_PRODUCT_AIR720U, 0xff, 0, 0) }, { } /* Terminating entry */ }; MODULE_DEVICE_TABLE(usb, option_ids); -- cgit v1.2.3 From a15ccef82d3de9a37dc25898c60a394209368dc8 Mon Sep 17 00:00:00 2001 From: Ritvik Budhiraja Date: Tue, 21 Nov 2023 19:13:47 +0530 Subject: cifs: fix use after free for iface while disabling secondary channels We were deferencing iface after it has been released. Fix is to release after all dereference instances have been encountered. Signed-off-by: Ritvik Budhiraja Reported-by: kernel test robot Reported-by: Dan Carpenter Closes: https://lore.kernel.org/r/202311110815.UJaeU3Tt-lkp@intel.com/ Signed-off-by: Steve French --- fs/smb/client/sess.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/smb/client/sess.c b/fs/smb/client/sess.c index 8b2d7c1ca428..816e01c5589b 100644 --- a/fs/smb/client/sess.c +++ b/fs/smb/client/sess.c @@ -332,10 +332,10 @@ cifs_disable_secondary_channels(struct cifs_ses *ses) if (iface) { spin_lock(&ses->iface_lock); - kref_put(&iface->refcount, release_iface); iface->num_channels--; if (iface->weight_fulfilled) iface->weight_fulfilled--; + kref_put(&iface->refcount, release_iface); spin_unlock(&ses->iface_lock); } -- cgit v1.2.3 From ed3e0a149b58ea8cfd10cc4f7cefb39877ff07ac Mon Sep 17 00:00:00 2001 From: Paulo Alcantara Date: Tue, 21 Nov 2023 20:12:52 -0300 Subject: smb: client: implement ->query_reparse_point() for SMB1 Reparse points are not limited to symlinks, so implement ->query_reparse_point() in order to handle different file types. Signed-off-by: Paulo Alcantara (SUSE) Signed-off-by: Steve French --- fs/smb/client/cifspdu.h | 2 +- fs/smb/client/cifsproto.h | 9 +++ fs/smb/client/cifssmb.c | 193 ++++++++++++++++++---------------------------- fs/smb/client/smb1ops.c | 49 +++--------- fs/smb/client/smb2ops.c | 35 ++++----- 5 files changed, 113 insertions(+), 175 deletions(-) diff --git a/fs/smb/client/cifspdu.h b/fs/smb/client/cifspdu.h index a75220db5c1e..2a90134331a4 100644 --- a/fs/smb/client/cifspdu.h +++ b/fs/smb/client/cifspdu.h @@ -1356,7 +1356,7 @@ typedef struct smb_com_transaction_ioctl_rsp { __le32 DataDisplacement; __u8 SetupCount; /* 1 */ __le16 ReturnedDataLen; - __u16 ByteCount; + __le16 ByteCount; } __attribute__((packed)) TRANSACT_IOCTL_RSP; #define CIFS_ACL_OWNER 1 diff --git a/fs/smb/client/cifsproto.h b/fs/smb/client/cifsproto.h index d87e2c26cce2..8a739c10d634 100644 --- a/fs/smb/client/cifsproto.h +++ b/fs/smb/client/cifsproto.h @@ -458,6 +458,12 @@ extern int CIFSSMBUnixQuerySymLink(const unsigned int xid, struct cifs_tcon *tcon, const unsigned char *searchName, char **syminfo, const struct nls_table *nls_codepage, int remap); +extern int cifs_query_reparse_point(const unsigned int xid, + struct cifs_tcon *tcon, + struct cifs_sb_info *cifs_sb, + const char *full_path, + u32 *tag, struct kvec *rsp, + int *rsp_buftype); extern int CIFSSMBQuerySymLink(const unsigned int xid, struct cifs_tcon *tcon, __u16 fid, char **symlinkinfo, const struct nls_table *nls_codepage); @@ -659,6 +665,9 @@ void cifs_put_tcp_super(struct super_block *sb); int cifs_update_super_prepath(struct cifs_sb_info *cifs_sb, char *prefix); char *extract_hostname(const char *unc); char *extract_sharename(const char *unc); +int parse_reparse_point(struct reparse_data_buffer *buf, + u32 plen, struct cifs_sb_info *cifs_sb, + bool unicode, char **target_path); #ifdef CONFIG_CIFS_DFS_UPCALL static inline int get_dfs_path(const unsigned int xid, struct cifs_ses *ses, diff --git a/fs/smb/client/cifssmb.c b/fs/smb/client/cifssmb.c index 25503f1a4fd2..bad91ba6c3a9 100644 --- a/fs/smb/client/cifssmb.c +++ b/fs/smb/client/cifssmb.c @@ -2690,136 +2690,97 @@ querySymLinkRetry: return rc; } -/* - * Recent Windows versions now create symlinks more frequently - * and they use the "reparse point" mechanism below. We can of course - * do symlinks nicely to Samba and other servers which support the - * CIFS Unix Extensions and we can also do SFU symlinks and "client only" - * "MF" symlinks optionally, but for recent Windows we really need to - * reenable the code below and fix the cifs_symlink callers to handle this. - * In the interim this code has been moved to its own config option so - * it is not compiled in by default until callers fixed up and more tested. - */ -int -CIFSSMBQuerySymLink(const unsigned int xid, struct cifs_tcon *tcon, - __u16 fid, char **symlinkinfo, - const struct nls_table *nls_codepage) +int cifs_query_reparse_point(const unsigned int xid, + struct cifs_tcon *tcon, + struct cifs_sb_info *cifs_sb, + const char *full_path, + u32 *tag, struct kvec *rsp, + int *rsp_buftype) { - int rc = 0; - int bytes_returned; - struct smb_com_transaction_ioctl_req *pSMB; - struct smb_com_transaction_ioctl_rsp *pSMBr; - bool is_unicode; - unsigned int sub_len; - char *sub_start; - struct reparse_symlink_data *reparse_buf; - struct reparse_posix_data *posix_buf; + struct cifs_open_parms oparms; + TRANSACT_IOCTL_REQ *io_req = NULL; + TRANSACT_IOCTL_RSP *io_rsp = NULL; + struct cifs_fid fid; __u32 data_offset, data_count; - char *end_of_smb; + __u8 *start, *end; + int io_rsp_len; + int oplock = 0; + int rc; - cifs_dbg(FYI, "In Windows reparse style QueryLink for fid %u\n", fid); - rc = smb_init(SMB_COM_NT_TRANSACT, 23, tcon, (void **) &pSMB, - (void **) &pSMBr); + cifs_tcon_dbg(FYI, "%s: path=%s\n", __func__, full_path); + + if (cap_unix(tcon->ses)) + return -EOPNOTSUPP; + + oparms = (struct cifs_open_parms) { + .tcon = tcon, + .cifs_sb = cifs_sb, + .desired_access = FILE_READ_ATTRIBUTES, + .create_options = cifs_create_options(cifs_sb, + OPEN_REPARSE_POINT), + .disposition = FILE_OPEN, + .path = full_path, + .fid = &fid, + }; + + rc = CIFS_open(xid, &oparms, &oplock, NULL); if (rc) return rc; - pSMB->TotalParameterCount = 0 ; - pSMB->TotalDataCount = 0; - pSMB->MaxParameterCount = cpu_to_le32(2); - /* BB find exact data count max from sess structure BB */ - pSMB->MaxDataCount = cpu_to_le32(CIFSMaxBufSize & 0xFFFFFF00); - pSMB->MaxSetupCount = 4; - pSMB->Reserved = 0; - pSMB->ParameterOffset = 0; - pSMB->DataCount = 0; - pSMB->DataOffset = 0; - pSMB->SetupCount = 4; - pSMB->SubCommand = cpu_to_le16(NT_TRANSACT_IOCTL); - pSMB->ParameterCount = pSMB->TotalParameterCount; - pSMB->FunctionCode = cpu_to_le32(FSCTL_GET_REPARSE_POINT); - pSMB->IsFsctl = 1; /* FSCTL */ - pSMB->IsRootFlag = 0; - pSMB->Fid = fid; /* file handle always le */ - pSMB->ByteCount = 0; + rc = smb_init(SMB_COM_NT_TRANSACT, 23, tcon, + (void **)&io_req, (void **)&io_rsp); + if (rc) + goto error; - rc = SendReceive(xid, tcon->ses, (struct smb_hdr *) pSMB, - (struct smb_hdr *) pSMBr, &bytes_returned, 0); - if (rc) { - cifs_dbg(FYI, "Send error in QueryReparseLinkInfo = %d\n", rc); - goto qreparse_out; - } + io_req->TotalParameterCount = 0; + io_req->TotalDataCount = 0; + io_req->MaxParameterCount = cpu_to_le32(2); + /* BB find exact data count max from sess structure BB */ + io_req->MaxDataCount = cpu_to_le32(CIFSMaxBufSize & 0xFFFFFF00); + io_req->MaxSetupCount = 4; + io_req->Reserved = 0; + io_req->ParameterOffset = 0; + io_req->DataCount = 0; + io_req->DataOffset = 0; + io_req->SetupCount = 4; + io_req->SubCommand = cpu_to_le16(NT_TRANSACT_IOCTL); + io_req->ParameterCount = io_req->TotalParameterCount; + io_req->FunctionCode = cpu_to_le32(FSCTL_GET_REPARSE_POINT); + io_req->IsFsctl = 1; + io_req->IsRootFlag = 0; + io_req->Fid = fid.netfid; + io_req->ByteCount = 0; + + rc = SendReceive(xid, tcon->ses, (struct smb_hdr *)io_req, + (struct smb_hdr *)io_rsp, &io_rsp_len, 0); + if (rc) + goto error; - data_offset = le32_to_cpu(pSMBr->DataOffset); - data_count = le32_to_cpu(pSMBr->DataCount); - if (get_bcc(&pSMBr->hdr) < 2 || data_offset > 512) { - /* BB also check enough total bytes returned */ - rc = -EIO; /* bad smb */ - goto qreparse_out; - } - if (!data_count || (data_count > 2048)) { + data_offset = le32_to_cpu(io_rsp->DataOffset); + data_count = le32_to_cpu(io_rsp->DataCount); + if (get_bcc(&io_rsp->hdr) < 2 || data_offset > 512 || + !data_count || data_count > 2048) { rc = -EIO; - cifs_dbg(FYI, "Invalid return data count on get reparse info ioctl\n"); - goto qreparse_out; - } - end_of_smb = 2 + get_bcc(&pSMBr->hdr) + (char *)&pSMBr->ByteCount; - reparse_buf = (struct reparse_symlink_data *) - ((char *)&pSMBr->hdr.Protocol + data_offset); - if ((char *)reparse_buf >= end_of_smb) { - rc = -EIO; - goto qreparse_out; - } - if (reparse_buf->ReparseTag == cpu_to_le32(IO_REPARSE_TAG_NFS)) { - cifs_dbg(FYI, "NFS style reparse tag\n"); - posix_buf = (struct reparse_posix_data *)reparse_buf; - - if (posix_buf->InodeType != cpu_to_le64(NFS_SPECFILE_LNK)) { - cifs_dbg(FYI, "unsupported file type 0x%llx\n", - le64_to_cpu(posix_buf->InodeType)); - rc = -EOPNOTSUPP; - goto qreparse_out; - } - is_unicode = true; - sub_len = le16_to_cpu(reparse_buf->ReparseDataLength); - if (posix_buf->PathBuffer + sub_len > end_of_smb) { - cifs_dbg(FYI, "reparse buf beyond SMB\n"); - rc = -EIO; - goto qreparse_out; - } - *symlinkinfo = cifs_strndup_from_utf16(posix_buf->PathBuffer, - sub_len, is_unicode, nls_codepage); - goto qreparse_out; - } else if (reparse_buf->ReparseTag != - cpu_to_le32(IO_REPARSE_TAG_SYMLINK)) { - rc = -EOPNOTSUPP; - goto qreparse_out; + goto error; } - /* Reparse tag is NTFS symlink */ - sub_start = le16_to_cpu(reparse_buf->SubstituteNameOffset) + - reparse_buf->PathBuffer; - sub_len = le16_to_cpu(reparse_buf->SubstituteNameLength); - if (sub_start + sub_len > end_of_smb) { - cifs_dbg(FYI, "reparse buf beyond SMB\n"); + end = 2 + get_bcc(&io_rsp->hdr) + (__u8 *)&io_rsp->ByteCount; + start = (__u8 *)&io_rsp->hdr.Protocol + data_offset; + if (start >= end) { rc = -EIO; - goto qreparse_out; + goto error; } - if (pSMBr->hdr.Flags2 & SMBFLG2_UNICODE) - is_unicode = true; - else - is_unicode = false; - - /* BB FIXME investigate remapping reserved chars here */ - *symlinkinfo = cifs_strndup_from_utf16(sub_start, sub_len, is_unicode, - nls_codepage); - if (!*symlinkinfo) - rc = -ENOMEM; -qreparse_out: - cifs_buf_release(pSMB); - /* - * Note: On -EAGAIN error only caller can retry on handle based calls - * since file handle passed in no longer valid. - */ + *tag = le32_to_cpu(((struct reparse_data_buffer *)start)->ReparseTag); + rsp->iov_base = io_rsp; + rsp->iov_len = io_rsp_len; + *rsp_buftype = CIFS_LARGE_BUFFER; + CIFSSMBClose(xid, tcon, fid.netfid); + return 0; + +error: + cifs_buf_release(io_req); + CIFSSMBClose(xid, tcon, fid.netfid); return rc; } diff --git a/fs/smb/client/smb1ops.c b/fs/smb/client/smb1ops.c index 9bf8735cdd1e..6b4d8effa79d 100644 --- a/fs/smb/client/smb1ops.c +++ b/fs/smb/client/smb1ops.c @@ -979,18 +979,13 @@ static int cifs_query_symlink(const unsigned int xid, char **target_path, struct kvec *rsp_iov) { + struct reparse_data_buffer *buf; + TRANSACT_IOCTL_RSP *io = rsp_iov->iov_base; + bool unicode = !!(io->hdr.Flags2 & SMBFLG2_UNICODE); + u32 plen = le16_to_cpu(io->ByteCount); int rc; - int oplock = 0; - bool is_reparse_point = !!rsp_iov; - struct cifs_fid fid; - struct cifs_open_parms oparms; - cifs_dbg(FYI, "%s: path: %s\n", __func__, full_path); - - if (is_reparse_point) { - cifs_dbg(VFS, "reparse points not handled for SMB1 symlinks\n"); - return -EOPNOTSUPP; - } + cifs_tcon_dbg(FYI, "%s: path=%s\n", __func__, full_path); /* Check for unix extensions */ if (cap_unix(tcon->ses)) { @@ -1001,37 +996,12 @@ static int cifs_query_symlink(const unsigned int xid, rc = cifs_unix_dfs_readlink(xid, tcon, full_path, target_path, cifs_sb->local_nls); - - goto out; + return rc; } - oparms = (struct cifs_open_parms) { - .tcon = tcon, - .cifs_sb = cifs_sb, - .desired_access = FILE_READ_ATTRIBUTES, - .create_options = cifs_create_options(cifs_sb, - OPEN_REPARSE_POINT), - .disposition = FILE_OPEN, - .path = full_path, - .fid = &fid, - }; - - rc = CIFS_open(xid, &oparms, &oplock, NULL); - if (rc) - goto out; - - rc = CIFSSMBQuerySymLink(xid, tcon, fid.netfid, target_path, - cifs_sb->local_nls); - if (rc) - goto out_close; - - convert_delimiter(*target_path, '/'); -out_close: - CIFSSMBClose(xid, tcon, fid.netfid); -out: - if (!rc) - cifs_dbg(FYI, "%s: target path: %s\n", __func__, *target_path); - return rc; + buf = (struct reparse_data_buffer *)((__u8 *)&io->hdr.Protocol + + le32_to_cpu(io->DataOffset)); + return parse_reparse_point(buf, plen, cifs_sb, unicode, target_path); } static bool @@ -1214,6 +1184,7 @@ struct smb_version_operations smb1_operations = { .is_path_accessible = cifs_is_path_accessible, .can_echo = cifs_can_echo, .query_path_info = cifs_query_path_info, + .query_reparse_point = cifs_query_reparse_point, .query_file_info = cifs_query_file_info, .get_srv_inum = cifs_get_srv_inum, .set_path_size = CIFSSMBSetEOF, diff --git a/fs/smb/client/smb2ops.c b/fs/smb/client/smb2ops.c index a959ed2c9b22..e9c8cff0b1d2 100644 --- a/fs/smb/client/smb2ops.c +++ b/fs/smb/client/smb2ops.c @@ -2894,27 +2894,26 @@ parse_reparse_posix(struct reparse_posix_data *symlink_buf, return 0; } -static int -parse_reparse_symlink(struct reparse_symlink_data_buffer *symlink_buf, - u32 plen, char **target_path, - struct cifs_sb_info *cifs_sb) +static int parse_reparse_symlink(struct reparse_symlink_data_buffer *sym, + u32 plen, bool unicode, char **target_path, + struct cifs_sb_info *cifs_sb) { unsigned int sub_len; unsigned int sub_offset; /* We handle Symbolic Link reparse tag here. See: MS-FSCC 2.1.2.4 */ - sub_offset = le16_to_cpu(symlink_buf->SubstituteNameOffset); - sub_len = le16_to_cpu(symlink_buf->SubstituteNameLength); + sub_offset = le16_to_cpu(sym->SubstituteNameOffset); + sub_len = le16_to_cpu(sym->SubstituteNameLength); if (sub_offset + 20 > plen || sub_offset + sub_len + 20 > plen) { cifs_dbg(VFS, "srv returned malformed symlink buffer\n"); return -EIO; } - *target_path = cifs_strndup_from_utf16( - symlink_buf->PathBuffer + sub_offset, - sub_len, true, cifs_sb->local_nls); + *target_path = cifs_strndup_from_utf16(sym->PathBuffer + sub_offset, + sub_len, unicode, + cifs_sb->local_nls); if (!(*target_path)) return -ENOMEM; @@ -2924,19 +2923,17 @@ parse_reparse_symlink(struct reparse_symlink_data_buffer *symlink_buf, return 0; } -static int -parse_reparse_point(struct reparse_data_buffer *buf, - u32 plen, char **target_path, - struct cifs_sb_info *cifs_sb) +int parse_reparse_point(struct reparse_data_buffer *buf, + u32 plen, struct cifs_sb_info *cifs_sb, + bool unicode, char **target_path) { - if (plen < sizeof(struct reparse_data_buffer)) { + if (plen < sizeof(*buf)) { cifs_dbg(VFS, "reparse buffer is too small. Must be at least 8 bytes but was %d\n", plen); return -EIO; } - if (plen < le16_to_cpu(buf->ReparseDataLength) + - sizeof(struct reparse_data_buffer)) { + if (plen < le16_to_cpu(buf->ReparseDataLength) + sizeof(*buf)) { cifs_dbg(VFS, "srv returned invalid reparse buf length: %d\n", plen); return -EIO; @@ -2951,7 +2948,7 @@ parse_reparse_point(struct reparse_data_buffer *buf, case IO_REPARSE_TAG_SYMLINK: return parse_reparse_symlink( (struct reparse_symlink_data_buffer *)buf, - plen, target_path, cifs_sb); + plen, unicode, target_path, cifs_sb); default: cifs_dbg(VFS, "srv returned unknown symlink buffer tag:0x%08x\n", le32_to_cpu(buf->ReparseTag)); @@ -2970,11 +2967,11 @@ static int smb2_query_symlink(const unsigned int xid, struct smb2_ioctl_rsp *io = rsp_iov->iov_base; u32 plen = le32_to_cpu(io->OutputCount); - cifs_dbg(FYI, "%s: path: %s\n", __func__, full_path); + cifs_tcon_dbg(FYI, "%s: path: %s\n", __func__, full_path); buf = (struct reparse_data_buffer *)((u8 *)io + le32_to_cpu(io->OutputOffset)); - return parse_reparse_point(buf, plen, target_path, cifs_sb); + return parse_reparse_point(buf, plen, cifs_sb, true, target_path); } static int smb2_query_reparse_point(const unsigned int xid, -- cgit v1.2.3 From 539aad7f14dab7f947e5ab81901c0b20513a50db Mon Sep 17 00:00:00 2001 From: Paulo Alcantara Date: Tue, 21 Nov 2023 20:12:53 -0300 Subject: smb: client: introduce ->parse_reparse_point() Parse reparse point into cifs_open_info_data structure and feed it through cifs_open_info_to_fattr(). Signed-off-by: Paulo Alcantara (SUSE) Signed-off-by: Steve French --- fs/smb/client/cifsglob.h | 6 ++++-- fs/smb/client/inode.c | 23 ++++++++++++++--------- fs/smb/client/smb1ops.c | 41 +++++++++++++++++++++++------------------ fs/smb/client/smb2ops.c | 28 +++++++++++++++------------- 4 files changed, 56 insertions(+), 42 deletions(-) diff --git a/fs/smb/client/cifsglob.h b/fs/smb/client/cifsglob.h index 6ffbd81bd109..111daa4ff261 100644 --- a/fs/smb/client/cifsglob.h +++ b/fs/smb/client/cifsglob.h @@ -395,8 +395,7 @@ struct smb_version_operations { struct cifs_tcon *tcon, struct cifs_sb_info *cifs_sb, const char *full_path, - char **target_path, - struct kvec *rsp_iov); + char **target_path); /* open a file for non-posix mounts */ int (*open)(const unsigned int xid, struct cifs_open_parms *oparms, __u32 *oplock, void *buf); @@ -551,6 +550,9 @@ struct smb_version_operations { bool (*is_status_io_timeout)(char *buf); /* Check for STATUS_NETWORK_NAME_DELETED */ bool (*is_network_name_deleted)(char *buf, struct TCP_Server_Info *srv); + int (*parse_reparse_point)(struct cifs_sb_info *cifs_sb, + struct kvec *rsp_iov, + struct cifs_open_info_data *data); }; struct smb_version_values { diff --git a/fs/smb/client/inode.c b/fs/smb/client/inode.c index 86fbd3f847d6..dd482de3dc3f 100644 --- a/fs/smb/client/inode.c +++ b/fs/smb/client/inode.c @@ -459,8 +459,7 @@ static int cifs_get_unix_fattr(const unsigned char *full_path, return -EOPNOTSUPP; rc = server->ops->query_symlink(xid, tcon, cifs_sb, full_path, - &fattr->cf_symlink_target, - NULL); + &fattr->cf_symlink_target); cifs_dbg(FYI, "%s: query_symlink: %d\n", __func__, rc); } return rc; @@ -1035,22 +1034,28 @@ static int reparse_info_to_fattr(struct cifs_open_info_data *data, if (!rc) iov = &rsp_iov; } + + rc = -EOPNOTSUPP; switch ((data->reparse_tag = tag)) { case 0: /* SMB1 symlink */ - iov = NULL; - fallthrough; - case IO_REPARSE_TAG_NFS: - case IO_REPARSE_TAG_SYMLINK: - if (!data->symlink_target && server->ops->query_symlink) { + if (server->ops->query_symlink) { rc = server->ops->query_symlink(xid, tcon, cifs_sb, full_path, - &data->symlink_target, - iov); + &data->symlink_target); } break; case IO_REPARSE_TAG_MOUNT_POINT: cifs_create_junction_fattr(fattr, sb); + rc = 0; goto out; + default: + if (data->symlink_target) { + rc = 0; + } else if (server->ops->parse_reparse_point) { + rc = server->ops->parse_reparse_point(cifs_sb, + iov, data); + } + break; } cifs_open_info_to_fattr(fattr, data, sb); diff --git a/fs/smb/client/smb1ops.c b/fs/smb/client/smb1ops.c index 6b4d8effa79d..0dd599004e04 100644 --- a/fs/smb/client/smb1ops.c +++ b/fs/smb/client/smb1ops.c @@ -976,32 +976,36 @@ static int cifs_query_symlink(const unsigned int xid, struct cifs_tcon *tcon, struct cifs_sb_info *cifs_sb, const char *full_path, - char **target_path, - struct kvec *rsp_iov) + char **target_path) { - struct reparse_data_buffer *buf; - TRANSACT_IOCTL_RSP *io = rsp_iov->iov_base; - bool unicode = !!(io->hdr.Flags2 & SMBFLG2_UNICODE); - u32 plen = le16_to_cpu(io->ByteCount); int rc; cifs_tcon_dbg(FYI, "%s: path=%s\n", __func__, full_path); - /* Check for unix extensions */ - if (cap_unix(tcon->ses)) { - rc = CIFSSMBUnixQuerySymLink(xid, tcon, full_path, target_path, - cifs_sb->local_nls, - cifs_remap(cifs_sb)); - if (rc == -EREMOTE) - rc = cifs_unix_dfs_readlink(xid, tcon, full_path, - target_path, - cifs_sb->local_nls); - return rc; - } + if (!cap_unix(tcon->ses)) + return -EOPNOTSUPP; + + rc = CIFSSMBUnixQuerySymLink(xid, tcon, full_path, target_path, + cifs_sb->local_nls, cifs_remap(cifs_sb)); + if (rc == -EREMOTE) + rc = cifs_unix_dfs_readlink(xid, tcon, full_path, + target_path, cifs_sb->local_nls); + return rc; +} + +static int cifs_parse_reparse_point(struct cifs_sb_info *cifs_sb, + struct kvec *rsp_iov, + struct cifs_open_info_data *data) +{ + struct reparse_data_buffer *buf; + TRANSACT_IOCTL_RSP *io = rsp_iov->iov_base; + bool unicode = !!(io->hdr.Flags2 & SMBFLG2_UNICODE); + u32 plen = le16_to_cpu(io->ByteCount); buf = (struct reparse_data_buffer *)((__u8 *)&io->hdr.Protocol + le32_to_cpu(io->DataOffset)); - return parse_reparse_point(buf, plen, cifs_sb, unicode, target_path); + return parse_reparse_point(buf, plen, cifs_sb, unicode, + &data->symlink_target); } static bool @@ -1200,6 +1204,7 @@ struct smb_version_operations smb1_operations = { .rename = CIFSSMBRename, .create_hardlink = CIFSCreateHardLink, .query_symlink = cifs_query_symlink, + .parse_reparse_point = cifs_parse_reparse_point, .open = cifs_open_file, .set_fid = cifs_set_fid, .close = cifs_close_file, diff --git a/fs/smb/client/smb2ops.c b/fs/smb/client/smb2ops.c index e9c8cff0b1d2..2955eaa51d4d 100644 --- a/fs/smb/client/smb2ops.c +++ b/fs/smb/client/smb2ops.c @@ -2949,6 +2949,12 @@ int parse_reparse_point(struct reparse_data_buffer *buf, return parse_reparse_symlink( (struct reparse_symlink_data_buffer *)buf, plen, unicode, target_path, cifs_sb); + case IO_REPARSE_TAG_LX_SYMLINK: + case IO_REPARSE_TAG_AF_UNIX: + case IO_REPARSE_TAG_LX_FIFO: + case IO_REPARSE_TAG_LX_CHR: + case IO_REPARSE_TAG_LX_BLK: + return 0; default: cifs_dbg(VFS, "srv returned unknown symlink buffer tag:0x%08x\n", le32_to_cpu(buf->ReparseTag)); @@ -2956,22 +2962,18 @@ int parse_reparse_point(struct reparse_data_buffer *buf, } } -static int smb2_query_symlink(const unsigned int xid, - struct cifs_tcon *tcon, - struct cifs_sb_info *cifs_sb, - const char *full_path, - char **target_path, - struct kvec *rsp_iov) +static int smb2_parse_reparse_point(struct cifs_sb_info *cifs_sb, + struct kvec *rsp_iov, + struct cifs_open_info_data *data) { struct reparse_data_buffer *buf; struct smb2_ioctl_rsp *io = rsp_iov->iov_base; u32 plen = le32_to_cpu(io->OutputCount); - cifs_tcon_dbg(FYI, "%s: path: %s\n", __func__, full_path); - buf = (struct reparse_data_buffer *)((u8 *)io + le32_to_cpu(io->OutputOffset)); - return parse_reparse_point(buf, plen, cifs_sb, true, target_path); + return parse_reparse_point(buf, plen, cifs_sb, + true, &data->symlink_target); } static int smb2_query_reparse_point(const unsigned int xid, @@ -5206,7 +5208,7 @@ struct smb_version_operations smb20_operations = { .unlink = smb2_unlink, .rename = smb2_rename_path, .create_hardlink = smb2_create_hardlink, - .query_symlink = smb2_query_symlink, + .parse_reparse_point = smb2_parse_reparse_point, .query_mf_symlink = smb3_query_mf_symlink, .create_mf_symlink = smb3_create_mf_symlink, .open = smb2_open_file, @@ -5308,7 +5310,7 @@ struct smb_version_operations smb21_operations = { .unlink = smb2_unlink, .rename = smb2_rename_path, .create_hardlink = smb2_create_hardlink, - .query_symlink = smb2_query_symlink, + .parse_reparse_point = smb2_parse_reparse_point, .query_mf_symlink = smb3_query_mf_symlink, .create_mf_symlink = smb3_create_mf_symlink, .open = smb2_open_file, @@ -5413,7 +5415,7 @@ struct smb_version_operations smb30_operations = { .unlink = smb2_unlink, .rename = smb2_rename_path, .create_hardlink = smb2_create_hardlink, - .query_symlink = smb2_query_symlink, + .parse_reparse_point = smb2_parse_reparse_point, .query_mf_symlink = smb3_query_mf_symlink, .create_mf_symlink = smb3_create_mf_symlink, .open = smb2_open_file, @@ -5527,7 +5529,7 @@ struct smb_version_operations smb311_operations = { .unlink = smb2_unlink, .rename = smb2_rename_path, .create_hardlink = smb2_create_hardlink, - .query_symlink = smb2_query_symlink, + .parse_reparse_point = smb2_parse_reparse_point, .query_mf_symlink = smb3_query_mf_symlink, .create_mf_symlink = smb3_create_mf_symlink, .open = smb2_open_file, -- cgit v1.2.3 From 45e724022e2704b5a5193fd96f378822b0448e07 Mon Sep 17 00:00:00 2001 From: Paulo Alcantara Date: Tue, 21 Nov 2023 20:12:54 -0300 Subject: smb: client: set correct file type from NFS reparse points Handle all file types in NFS reparse points as specified in MS-FSCC 2.1.2.6 Network File System (NFS) Reparse Data Buffer. The client is now able to set all file types based on the parsed NFS reparse point, which used to support only symlinks. This works for SMB1+. Before patch: $ mount.cifs //srv/share /mnt -o ... $ ls -l /mnt ls: cannot access 'block': Operation not supported ls: cannot access 'char': Operation not supported ls: cannot access 'fifo': Operation not supported ls: cannot access 'sock': Operation not supported total 1 l????????? ? ? ? ? ? block l????????? ? ? ? ? ? char -rwxr-xr-x 1 root root 5 Nov 18 23:22 f0 l????????? ? ? ? ? ? fifo l--------- 1 root root 0 Nov 18 23:23 link -> f0 l????????? ? ? ? ? ? sock After patch: $ mount.cifs //srv/share /mnt -o ... $ ls -l /mnt total 1 brwxr-xr-x 1 root root 123, 123 Nov 18 00:34 block crwxr-xr-x 1 root root 1234, 1234 Nov 18 00:33 char -rwxr-xr-x 1 root root 5 Nov 18 23:22 f0 prwxr-xr-x 1 root root 0 Nov 18 23:23 fifo lrwxr-xr-x 1 root root 0 Nov 18 23:23 link -> f0 srwxr-xr-x 1 root root 0 Nov 19 2023 sock Signed-off-by: Paulo Alcantara (SUSE) Signed-off-by: Steve French --- fs/smb/client/cifsglob.h | 8 +++- fs/smb/client/cifspdu.h | 2 +- fs/smb/client/cifsproto.h | 4 +- fs/smb/client/inode.c | 51 ++++++++++++++++++++--- fs/smb/client/readdir.c | 6 ++- fs/smb/client/smb1ops.c | 3 +- fs/smb/client/smb2inode.c | 2 +- fs/smb/client/smb2ops.c | 101 ++++++++++++++++++++++++---------------------- 8 files changed, 116 insertions(+), 61 deletions(-) diff --git a/fs/smb/client/cifsglob.h b/fs/smb/client/cifsglob.h index 111daa4ff261..7558167f603c 100644 --- a/fs/smb/client/cifsglob.h +++ b/fs/smb/client/cifsglob.h @@ -191,7 +191,13 @@ struct cifs_open_info_data { bool reparse_point; bool symlink; }; - __u32 reparse_tag; + struct { + __u32 tag; + union { + struct reparse_data_buffer *buf; + struct reparse_posix_data *posix; + }; + } reparse; char *symlink_target; union { struct smb2_file_all_info fi; diff --git a/fs/smb/client/cifspdu.h b/fs/smb/client/cifspdu.h index 2a90134331a4..83ccc51a54d0 100644 --- a/fs/smb/client/cifspdu.h +++ b/fs/smb/client/cifspdu.h @@ -1509,7 +1509,7 @@ struct reparse_posix_data { __le16 ReparseDataLength; __u16 Reserved; __le64 InodeType; /* LNK, FIFO, CHR etc. */ - char PathBuffer[]; + __u8 DataBuffer[]; } __attribute__((packed)); struct cifs_quota_data { diff --git a/fs/smb/client/cifsproto.h b/fs/smb/client/cifsproto.h index 8a739c10d634..c00f84420559 100644 --- a/fs/smb/client/cifsproto.h +++ b/fs/smb/client/cifsproto.h @@ -210,7 +210,7 @@ int cifs_get_inode_info(struct inode **inode, const char *full_path, const struct cifs_fid *fid); bool cifs_reparse_point_to_fattr(struct cifs_sb_info *cifs_sb, struct cifs_fattr *fattr, - u32 tag); + struct cifs_open_info_data *data); extern int smb311_posix_get_inode_info(struct inode **pinode, const char *search_path, struct super_block *sb, unsigned int xid); extern int cifs_get_inode_info_unix(struct inode **pinode, @@ -667,7 +667,7 @@ char *extract_hostname(const char *unc); char *extract_sharename(const char *unc); int parse_reparse_point(struct reparse_data_buffer *buf, u32 plen, struct cifs_sb_info *cifs_sb, - bool unicode, char **target_path); + bool unicode, struct cifs_open_info_data *data); #ifdef CONFIG_CIFS_DFS_UPCALL static inline int get_dfs_path(const unsigned int xid, struct cifs_ses *ses, diff --git a/fs/smb/client/inode.c b/fs/smb/client/inode.c index dd482de3dc3f..47f49be69ced 100644 --- a/fs/smb/client/inode.c +++ b/fs/smb/client/inode.c @@ -721,10 +721,51 @@ static void smb311_posix_info_to_fattr(struct cifs_fattr *fattr, fattr->cf_mode, fattr->cf_uniqueid, fattr->cf_nlink); } +static inline dev_t nfs_mkdev(struct reparse_posix_data *buf) +{ + u64 v = le64_to_cpu(*(__le64 *)buf->DataBuffer); + + return MKDEV(v >> 32, v & 0xffffffff); +} + bool cifs_reparse_point_to_fattr(struct cifs_sb_info *cifs_sb, struct cifs_fattr *fattr, - u32 tag) + struct cifs_open_info_data *data) { + struct reparse_posix_data *buf = data->reparse.posix; + u32 tag = data->reparse.tag; + + if (tag == IO_REPARSE_TAG_NFS && buf) { + switch (le64_to_cpu(buf->InodeType)) { + case NFS_SPECFILE_CHR: + fattr->cf_mode |= S_IFCHR | cifs_sb->ctx->file_mode; + fattr->cf_dtype = DT_CHR; + fattr->cf_rdev = nfs_mkdev(buf); + break; + case NFS_SPECFILE_BLK: + fattr->cf_mode |= S_IFBLK | cifs_sb->ctx->file_mode; + fattr->cf_dtype = DT_BLK; + fattr->cf_rdev = nfs_mkdev(buf); + break; + case NFS_SPECFILE_FIFO: + fattr->cf_mode |= S_IFIFO | cifs_sb->ctx->file_mode; + fattr->cf_dtype = DT_FIFO; + break; + case NFS_SPECFILE_SOCK: + fattr->cf_mode |= S_IFSOCK | cifs_sb->ctx->file_mode; + fattr->cf_dtype = DT_SOCK; + break; + case NFS_SPECFILE_LNK: + fattr->cf_mode = S_IFLNK | cifs_sb->ctx->file_mode; + fattr->cf_dtype = DT_LNK; + break; + default: + WARN_ON_ONCE(1); + return false; + } + return true; + } + switch (tag) { case IO_REPARSE_TAG_LX_SYMLINK: fattr->cf_mode |= S_IFLNK | cifs_sb->ctx->file_mode; @@ -790,7 +831,7 @@ static void cifs_open_info_to_fattr(struct cifs_fattr *fattr, fattr->cf_nlink = le32_to_cpu(info->NumberOfLinks); if (cifs_open_data_reparse(data) && - cifs_reparse_point_to_fattr(cifs_sb, fattr, data->reparse_tag)) + cifs_reparse_point_to_fattr(cifs_sb, fattr, data)) goto out_reparse; if (fattr->cf_cifsattrs & ATTR_DIRECTORY) { @@ -855,7 +896,7 @@ cifs_get_file_info(struct file *filp) data.adjust_tz = false; if (data.symlink_target) { data.symlink = true; - data.reparse_tag = IO_REPARSE_TAG_SYMLINK; + data.reparse.tag = IO_REPARSE_TAG_SYMLINK; } cifs_open_info_to_fattr(&fattr, &data, inode->i_sb); break; @@ -1024,7 +1065,7 @@ static int reparse_info_to_fattr(struct cifs_open_info_data *data, struct cifs_sb_info *cifs_sb = CIFS_SB(sb); struct kvec rsp_iov, *iov = NULL; int rsp_buftype = CIFS_NO_BUFFER; - u32 tag = data->reparse_tag; + u32 tag = data->reparse.tag; int rc = 0; if (!tag && server->ops->query_reparse_point) { @@ -1036,7 +1077,7 @@ static int reparse_info_to_fattr(struct cifs_open_info_data *data, } rc = -EOPNOTSUPP; - switch ((data->reparse_tag = tag)) { + switch ((data->reparse.tag = tag)) { case 0: /* SMB1 symlink */ if (server->ops->query_symlink) { rc = server->ops->query_symlink(xid, tcon, diff --git a/fs/smb/client/readdir.c b/fs/smb/client/readdir.c index 47fc22de8d20..d30ea2005eb3 100644 --- a/fs/smb/client/readdir.c +++ b/fs/smb/client/readdir.c @@ -153,6 +153,10 @@ static bool reparse_file_needs_reval(const struct cifs_fattr *fattr) static void cifs_fill_common_info(struct cifs_fattr *fattr, struct cifs_sb_info *cifs_sb) { + struct cifs_open_info_data data = { + .reparse = { .tag = fattr->cf_cifstag, }, + }; + fattr->cf_uid = cifs_sb->ctx->linux_uid; fattr->cf_gid = cifs_sb->ctx->linux_gid; @@ -165,7 +169,7 @@ cifs_fill_common_info(struct cifs_fattr *fattr, struct cifs_sb_info *cifs_sb) * reasonably map some of them to directories vs. files vs. symlinks */ if ((fattr->cf_cifsattrs & ATTR_REPARSE) && - cifs_reparse_point_to_fattr(cifs_sb, fattr, fattr->cf_cifstag)) + cifs_reparse_point_to_fattr(cifs_sb, fattr, &data)) goto out_reparse; if (fattr->cf_cifsattrs & ATTR_DIRECTORY) { diff --git a/fs/smb/client/smb1ops.c b/fs/smb/client/smb1ops.c index 0dd599004e04..64e25233e85d 100644 --- a/fs/smb/client/smb1ops.c +++ b/fs/smb/client/smb1ops.c @@ -1004,8 +1004,7 @@ static int cifs_parse_reparse_point(struct cifs_sb_info *cifs_sb, buf = (struct reparse_data_buffer *)((__u8 *)&io->hdr.Protocol + le32_to_cpu(io->DataOffset)); - return parse_reparse_point(buf, plen, cifs_sb, unicode, - &data->symlink_target); + return parse_reparse_point(buf, plen, cifs_sb, unicode, data); } static bool diff --git a/fs/smb/client/smb2inode.c b/fs/smb/client/smb2inode.c index 0b89f7008ac0..c94940af5d4b 100644 --- a/fs/smb/client/smb2inode.c +++ b/fs/smb/client/smb2inode.c @@ -555,7 +555,7 @@ static int parse_create_response(struct cifs_open_info_data *data, break; } data->reparse_point = reparse_point; - data->reparse_tag = tag; + data->reparse.tag = tag; return rc; } diff --git a/fs/smb/client/smb2ops.c b/fs/smb/client/smb2ops.c index 2955eaa51d4d..f01a929a7a3a 100644 --- a/fs/smb/client/smb2ops.c +++ b/fs/smb/client/smb2ops.c @@ -2866,89 +2866,95 @@ smb2_get_dfs_refer(const unsigned int xid, struct cifs_ses *ses, return rc; } -static int -parse_reparse_posix(struct reparse_posix_data *symlink_buf, - u32 plen, char **target_path, - struct cifs_sb_info *cifs_sb) +/* See MS-FSCC 2.1.2.6 for the 'NFS' style reparse tags */ +static int parse_reparse_posix(struct reparse_posix_data *buf, + struct cifs_sb_info *cifs_sb, + struct cifs_open_info_data *data) { unsigned int len; - - /* See MS-FSCC 2.1.2.6 for the 'NFS' style reparse tags */ - len = le16_to_cpu(symlink_buf->ReparseDataLength); - - if (le64_to_cpu(symlink_buf->InodeType) != NFS_SPECFILE_LNK) { - cifs_dbg(VFS, "%lld not a supported symlink type\n", - le64_to_cpu(symlink_buf->InodeType)); + u64 type; + + switch ((type = le64_to_cpu(buf->InodeType))) { + case NFS_SPECFILE_LNK: + len = le16_to_cpu(buf->ReparseDataLength); + data->symlink_target = cifs_strndup_from_utf16(buf->DataBuffer, + len, true, + cifs_sb->local_nls); + if (!data->symlink_target) + return -ENOMEM; + convert_delimiter(data->symlink_target, '/'); + cifs_dbg(FYI, "%s: target path: %s\n", + __func__, data->symlink_target); + break; + case NFS_SPECFILE_CHR: + case NFS_SPECFILE_BLK: + case NFS_SPECFILE_FIFO: + case NFS_SPECFILE_SOCK: + break; + default: + cifs_dbg(VFS, "%s: unhandled inode type: 0x%llx\n", + __func__, type); return -EOPNOTSUPP; } - - *target_path = cifs_strndup_from_utf16( - symlink_buf->PathBuffer, - len, true, cifs_sb->local_nls); - if (!(*target_path)) - return -ENOMEM; - - convert_delimiter(*target_path, '/'); - cifs_dbg(FYI, "%s: target path: %s\n", __func__, *target_path); - return 0; } static int parse_reparse_symlink(struct reparse_symlink_data_buffer *sym, - u32 plen, bool unicode, char **target_path, - struct cifs_sb_info *cifs_sb) + u32 plen, bool unicode, + struct cifs_sb_info *cifs_sb, + struct cifs_open_info_data *data) { - unsigned int sub_len; - unsigned int sub_offset; + unsigned int len; + unsigned int offs; /* We handle Symbolic Link reparse tag here. See: MS-FSCC 2.1.2.4 */ - sub_offset = le16_to_cpu(sym->SubstituteNameOffset); - sub_len = le16_to_cpu(sym->SubstituteNameLength); - if (sub_offset + 20 > plen || - sub_offset + sub_len + 20 > plen) { + offs = le16_to_cpu(sym->SubstituteNameOffset); + len = le16_to_cpu(sym->SubstituteNameLength); + if (offs + 20 > plen || offs + len + 20 > plen) { cifs_dbg(VFS, "srv returned malformed symlink buffer\n"); return -EIO; } - *target_path = cifs_strndup_from_utf16(sym->PathBuffer + sub_offset, - sub_len, unicode, - cifs_sb->local_nls); - if (!(*target_path)) + data->symlink_target = cifs_strndup_from_utf16(sym->PathBuffer + offs, + len, unicode, + cifs_sb->local_nls); + if (!data->symlink_target) return -ENOMEM; - convert_delimiter(*target_path, '/'); - cifs_dbg(FYI, "%s: target path: %s\n", __func__, *target_path); + convert_delimiter(data->symlink_target, '/'); + cifs_dbg(FYI, "%s: target path: %s\n", __func__, data->symlink_target); return 0; } int parse_reparse_point(struct reparse_data_buffer *buf, u32 plen, struct cifs_sb_info *cifs_sb, - bool unicode, char **target_path) + bool unicode, struct cifs_open_info_data *data) { if (plen < sizeof(*buf)) { - cifs_dbg(VFS, "reparse buffer is too small. Must be at least 8 bytes but was %d\n", - plen); + cifs_dbg(VFS, "%s: reparse buffer is too small. Must be at least 8 bytes but was %d\n", + __func__, plen); return -EIO; } if (plen < le16_to_cpu(buf->ReparseDataLength) + sizeof(*buf)) { - cifs_dbg(VFS, "srv returned invalid reparse buf length: %d\n", - plen); + cifs_dbg(VFS, "%s: invalid reparse buf length: %d\n", + __func__, plen); return -EIO; } + data->reparse.buf = buf; + /* See MS-FSCC 2.1.2 */ switch (le32_to_cpu(buf->ReparseTag)) { case IO_REPARSE_TAG_NFS: - return parse_reparse_posix( - (struct reparse_posix_data *)buf, - plen, target_path, cifs_sb); + return parse_reparse_posix((struct reparse_posix_data *)buf, + cifs_sb, data); case IO_REPARSE_TAG_SYMLINK: return parse_reparse_symlink( (struct reparse_symlink_data_buffer *)buf, - plen, unicode, target_path, cifs_sb); + plen, unicode, cifs_sb, data); case IO_REPARSE_TAG_LX_SYMLINK: case IO_REPARSE_TAG_AF_UNIX: case IO_REPARSE_TAG_LX_FIFO: @@ -2956,8 +2962,8 @@ int parse_reparse_point(struct reparse_data_buffer *buf, case IO_REPARSE_TAG_LX_BLK: return 0; default: - cifs_dbg(VFS, "srv returned unknown symlink buffer tag:0x%08x\n", - le32_to_cpu(buf->ReparseTag)); + cifs_dbg(VFS, "%s: unhandled reparse tag: 0x%08x\n", + __func__, le32_to_cpu(buf->ReparseTag)); return -EOPNOTSUPP; } } @@ -2972,8 +2978,7 @@ static int smb2_parse_reparse_point(struct cifs_sb_info *cifs_sb, buf = (struct reparse_data_buffer *)((u8 *)io + le32_to_cpu(io->OutputOffset)); - return parse_reparse_point(buf, plen, cifs_sb, - true, &data->symlink_target); + return parse_reparse_point(buf, plen, cifs_sb, true, data); } static int smb2_query_reparse_point(const unsigned int xid, -- cgit v1.2.3 From b0348e459c836abdb0f4b967e006d15c77cf1c87 Mon Sep 17 00:00:00 2001 From: Paulo Alcantara Date: Tue, 21 Nov 2023 20:12:55 -0300 Subject: smb: client: introduce cifs_sfu_make_node() Remove duplicate code and add new helper for creating special files in SFU (Services for UNIX) format that can be shared by SMB1+ code. Signed-off-by: Paulo Alcantara (SUSE) Signed-off-by: Steve French --- fs/smb/client/cifsproto.h | 3 ++ fs/smb/client/smb1ops.c | 80 +++++------------------------------------- fs/smb/client/smb2ops.c | 89 ++++++++++++++++++++++------------------------- 3 files changed, 52 insertions(+), 120 deletions(-) diff --git a/fs/smb/client/cifsproto.h b/fs/smb/client/cifsproto.h index c00f84420559..46feaa0880bd 100644 --- a/fs/smb/client/cifsproto.h +++ b/fs/smb/client/cifsproto.h @@ -668,6 +668,9 @@ char *extract_sharename(const char *unc); int parse_reparse_point(struct reparse_data_buffer *buf, u32 plen, struct cifs_sb_info *cifs_sb, bool unicode, struct cifs_open_info_data *data); +int cifs_sfu_make_node(unsigned int xid, struct inode *inode, + struct dentry *dentry, struct cifs_tcon *tcon, + const char *full_path, umode_t mode, dev_t dev); #ifdef CONFIG_CIFS_DFS_UPCALL static inline int get_dfs_path(const unsigned int xid, struct cifs_ses *ses, diff --git a/fs/smb/client/smb1ops.c b/fs/smb/client/smb1ops.c index 64e25233e85d..a9eaba8083b0 100644 --- a/fs/smb/client/smb1ops.c +++ b/fs/smb/client/smb1ops.c @@ -1041,15 +1041,7 @@ cifs_make_node(unsigned int xid, struct inode *inode, { struct cifs_sb_info *cifs_sb = CIFS_SB(inode->i_sb); struct inode *newinode = NULL; - int rc = -EPERM; - struct cifs_open_info_data buf = {}; - struct cifs_io_parms io_parms; - __u32 oplock = 0; - struct cifs_fid fid; - struct cifs_open_parms oparms; - unsigned int bytes_written; - struct win_dev *pdev; - struct kvec iov[2]; + int rc; if (tcon->unix_ext) { /* @@ -1083,74 +1075,18 @@ cifs_make_node(unsigned int xid, struct inode *inode, d_instantiate(dentry, newinode); return rc; } - /* - * SMB1 SFU emulation: should work with all servers, but only - * support block and char device (no socket & fifo) + * Check if mounted with mount parm 'sfu' mount parm. + * SFU emulation should work with all servers, but only + * supports block and char device (no socket & fifo), + * and was used by default in earlier versions of Windows */ if (!(cifs_sb->mnt_cifs_flags & CIFS_MOUNT_UNX_EMUL)) - return rc; - - if (!S_ISCHR(mode) && !S_ISBLK(mode)) - return rc; - - cifs_dbg(FYI, "sfu compat create special file\n"); - - oparms = (struct cifs_open_parms) { - .tcon = tcon, - .cifs_sb = cifs_sb, - .desired_access = GENERIC_WRITE, - .create_options = cifs_create_options(cifs_sb, CREATE_NOT_DIR | - CREATE_OPTION_SPECIAL), - .disposition = FILE_CREATE, - .path = full_path, - .fid = &fid, - }; - - if (tcon->ses->server->oplocks) - oplock = REQ_OPLOCK; - else - oplock = 0; - rc = tcon->ses->server->ops->open(xid, &oparms, &oplock, &buf); - if (rc) - return rc; - - /* - * BB Do not bother to decode buf since no local inode yet to put - * timestamps in, but we can reuse it safely. - */ - - pdev = (struct win_dev *)&buf.fi; - io_parms.pid = current->tgid; - io_parms.tcon = tcon; - io_parms.offset = 0; - io_parms.length = sizeof(struct win_dev); - iov[1].iov_base = &buf.fi; - iov[1].iov_len = sizeof(struct win_dev); - if (S_ISCHR(mode)) { - memcpy(pdev->type, "IntxCHR", 8); - pdev->major = cpu_to_le64(MAJOR(dev)); - pdev->minor = cpu_to_le64(MINOR(dev)); - rc = tcon->ses->server->ops->sync_write(xid, &fid, &io_parms, - &bytes_written, iov, 1); - } else if (S_ISBLK(mode)) { - memcpy(pdev->type, "IntxBLK", 8); - pdev->major = cpu_to_le64(MAJOR(dev)); - pdev->minor = cpu_to_le64(MINOR(dev)); - rc = tcon->ses->server->ops->sync_write(xid, &fid, &io_parms, - &bytes_written, iov, 1); - } - tcon->ses->server->ops->close(xid, tcon, &fid); - d_drop(dentry); - - /* FIXME: add code here to set EAs */ - - cifs_free_open_info(&buf); - return rc; + return -EPERM; + return cifs_sfu_make_node(xid, inode, dentry, tcon, + full_path, mode, dev); } - - struct smb_version_operations smb1_operations = { .send_cancel = send_nt_cancel, .compare_fids = cifs_compare_fids, diff --git a/fs/smb/client/smb2ops.c b/fs/smb/client/smb2ops.c index f01a929a7a3a..82ab62fd0040 100644 --- a/fs/smb/client/smb2ops.c +++ b/fs/smb/client/smb2ops.c @@ -5068,41 +5068,24 @@ smb2_next_header(char *buf) return le32_to_cpu(hdr->NextCommand); } -static int -smb2_make_node(unsigned int xid, struct inode *inode, - struct dentry *dentry, struct cifs_tcon *tcon, - const char *full_path, umode_t mode, dev_t dev) +int cifs_sfu_make_node(unsigned int xid, struct inode *inode, + struct dentry *dentry, struct cifs_tcon *tcon, + const char *full_path, umode_t mode, dev_t dev) { - struct cifs_sb_info *cifs_sb = CIFS_SB(inode->i_sb); - int rc = -EPERM; struct cifs_open_info_data buf = {}; - struct cifs_io_parms io_parms = {0}; - __u32 oplock = 0; - struct cifs_fid fid; + struct TCP_Server_Info *server = tcon->ses->server; struct cifs_open_parms oparms; + struct cifs_io_parms io_parms = {}; + struct cifs_sb_info *cifs_sb = CIFS_SB(inode->i_sb); + struct cifs_fid fid; unsigned int bytes_written; struct win_dev *pdev; struct kvec iov[2]; - - /* - * Check if mounted with mount parm 'sfu' mount parm. - * SFU emulation should work with all servers, but only - * supports block and char device (no socket & fifo), - * and was used by default in earlier versions of Windows - */ - if (!(cifs_sb->mnt_cifs_flags & CIFS_MOUNT_UNX_EMUL)) - return rc; - - /* - * TODO: Add ability to create instead via reparse point. Windows (e.g. - * their current NFS server) uses this approach to expose special files - * over SMB2/SMB3 and Samba will do this with SMB3.1.1 POSIX Extensions - */ + __u32 oplock = server->oplocks ? REQ_OPLOCK : 0; + int rc; if (!S_ISCHR(mode) && !S_ISBLK(mode) && !S_ISFIFO(mode)) - return rc; - - cifs_dbg(FYI, "sfu compat create special file\n"); + return -EPERM; oparms = (struct cifs_open_parms) { .tcon = tcon, @@ -5115,11 +5098,7 @@ smb2_make_node(unsigned int xid, struct inode *inode, .fid = &fid, }; - if (tcon->ses->server->oplocks) - oplock = REQ_OPLOCK; - else - oplock = 0; - rc = tcon->ses->server->ops->open(xid, &oparms, &oplock, &buf); + rc = server->ops->open(xid, &oparms, &oplock, &buf); if (rc) return rc; @@ -5127,42 +5106,56 @@ smb2_make_node(unsigned int xid, struct inode *inode, * BB Do not bother to decode buf since no local inode yet to put * timestamps in, but we can reuse it safely. */ - pdev = (struct win_dev *)&buf.fi; io_parms.pid = current->tgid; io_parms.tcon = tcon; - io_parms.offset = 0; - io_parms.length = sizeof(struct win_dev); - iov[1].iov_base = &buf.fi; - iov[1].iov_len = sizeof(struct win_dev); + io_parms.length = sizeof(*pdev); + iov[1].iov_base = pdev; + iov[1].iov_len = sizeof(*pdev); if (S_ISCHR(mode)) { memcpy(pdev->type, "IntxCHR", 8); pdev->major = cpu_to_le64(MAJOR(dev)); pdev->minor = cpu_to_le64(MINOR(dev)); - rc = tcon->ses->server->ops->sync_write(xid, &fid, &io_parms, - &bytes_written, iov, 1); } else if (S_ISBLK(mode)) { memcpy(pdev->type, "IntxBLK", 8); pdev->major = cpu_to_le64(MAJOR(dev)); pdev->minor = cpu_to_le64(MINOR(dev)); - rc = tcon->ses->server->ops->sync_write(xid, &fid, &io_parms, - &bytes_written, iov, 1); } else if (S_ISFIFO(mode)) { memcpy(pdev->type, "LnxFIFO", 8); - pdev->major = 0; - pdev->minor = 0; - rc = tcon->ses->server->ops->sync_write(xid, &fid, &io_parms, - &bytes_written, iov, 1); } - tcon->ses->server->ops->close(xid, tcon, &fid); - d_drop(dentry); + rc = server->ops->sync_write(xid, &fid, &io_parms, + &bytes_written, iov, 1); + server->ops->close(xid, tcon, &fid); + d_drop(dentry); /* FIXME: add code here to set EAs */ - cifs_free_open_info(&buf); return rc; } +static int smb2_make_node(unsigned int xid, struct inode *inode, + struct dentry *dentry, struct cifs_tcon *tcon, + const char *full_path, umode_t mode, dev_t dev) +{ + struct cifs_sb_info *cifs_sb = CIFS_SB(inode->i_sb); + + /* + * Check if mounted with mount parm 'sfu' mount parm. + * SFU emulation should work with all servers, but only + * supports block and char device (no socket & fifo), + * and was used by default in earlier versions of Windows + */ + if (!(cifs_sb->mnt_cifs_flags & CIFS_MOUNT_UNX_EMUL)) + return -EPERM; + /* + * TODO: Add ability to create instead via reparse point. Windows (e.g. + * their current NFS server) uses this approach to expose special files + * over SMB2/SMB3 and Samba will do this with SMB3.1.1 POSIX Extensions + */ + return cifs_sfu_make_node(xid, inode, dentry, tcon, + full_path, mode, dev); +} + #ifdef CONFIG_CIFS_ALLOW_INSECURE_LEGACY struct smb_version_operations smb20_operations = { .compare_fids = smb2_compare_fids, -- cgit v1.2.3 From c0a8574204054effad6ac83cc75c02576e2985fe Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Sun, 19 Nov 2023 14:32:34 +0900 Subject: arm64: add dependency between vmlinuz.efi and Image A common issue in Makefile is a race in parallel building. You need to be careful to prevent multiple threads from writing to the same file simultaneously. Commit 3939f3345050 ("ARM: 8418/1: add boot image dependencies to not generate invalid images") addressed such a bad scenario. A similar symptom occurs with the following command: $ make -j$(nproc) ARCH=arm64 Image vmlinuz.efi [ snip ] SORTTAB vmlinux OBJCOPY arch/arm64/boot/Image OBJCOPY arch/arm64/boot/Image AS arch/arm64/boot/zboot-header.o PAD arch/arm64/boot/vmlinux.bin GZIP arch/arm64/boot/vmlinuz OBJCOPY arch/arm64/boot/vmlinuz.o LD arch/arm64/boot/vmlinuz.efi.elf OBJCOPY arch/arm64/boot/vmlinuz.efi The log "OBJCOPY arch/arm64/boot/Image" is displayed twice. It indicates that two threads simultaneously enter arch/arm64/boot/ and write to arch/arm64/boot/Image. It occasionally leads to a build failure: $ make -j$(nproc) ARCH=arm64 Image vmlinuz.efi [ snip ] SORTTAB vmlinux OBJCOPY arch/arm64/boot/Image PAD arch/arm64/boot/vmlinux.bin truncate: Invalid number: 'arch/arm64/boot/vmlinux.bin' make[2]: *** [drivers/firmware/efi/libstub/Makefile.zboot:13: arch/arm64/boot/vmlinux.bin] Error 1 make[2]: *** Deleting file 'arch/arm64/boot/vmlinux.bin' make[1]: *** [arch/arm64/Makefile:163: vmlinuz.efi] Error 2 make[1]: *** Waiting for unfinished jobs.... make: *** [Makefile:234: __sub-make] Error 2 vmlinuz.efi depends on Image, but such a dependency is not specified in arch/arm64/Makefile. Signed-off-by: Masahiro Yamada Acked-by: Ard Biesheuvel Reviewed-by: SImon Glass Link: https://lore.kernel.org/r/20231119053234.2367621-1-masahiroy@kernel.org Signed-off-by: Catalin Marinas --- arch/arm64/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm64/Makefile b/arch/arm64/Makefile index 4bd85cc0d32b..9a2d3723cd0f 100644 --- a/arch/arm64/Makefile +++ b/arch/arm64/Makefile @@ -158,7 +158,7 @@ endif all: $(notdir $(KBUILD_IMAGE)) - +vmlinuz.efi: Image Image vmlinuz.efi: vmlinux $(Q)$(MAKE) $(build)=$(boot) $(boot)/$@ -- cgit v1.2.3 From c6bb057418876cdfdd29a6f7b8cef54539ee8811 Mon Sep 17 00:00:00 2001 From: Ronald Wahl Date: Wed, 1 Nov 2023 18:14:31 +0100 Subject: serial: 8250: 8250_omap: Do not start RX DMA on THRI interrupt Starting RX DMA on THRI interrupt is too early because TX may not have finished yet. This change is inspired by commit 90b8596ac460 ("serial: 8250: Prevent starting up DMA Rx on THRI interrupt") and fixes DMA issues I had with an AM62 SoC that is using the 8250 OMAP variant. Cc: stable@vger.kernel.org Fixes: c26389f998a8 ("serial: 8250: 8250_omap: Add DMA support for UARTs on K3 SoCs") Signed-off-by: Ronald Wahl Reviewed-by: Vignesh Raghavendra Link: https://lore.kernel.org/r/20231101171431.16495-1-rwahl@gmx.de Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/8250/8250_omap.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/drivers/tty/serial/8250/8250_omap.c b/drivers/tty/serial/8250/8250_omap.c index 2d42f485c987..7d99bc3be0b8 100644 --- a/drivers/tty/serial/8250/8250_omap.c +++ b/drivers/tty/serial/8250/8250_omap.c @@ -1298,10 +1298,12 @@ static int omap_8250_dma_handle_irq(struct uart_port *port) status = serial_port_in(port, UART_LSR); - if (priv->habit & UART_HAS_EFR2) - am654_8250_handle_rx_dma(up, iir, status); - else - status = omap_8250_handle_rx_dma(up, iir, status); + if ((iir & 0x3f) != UART_IIR_THRI) { + if (priv->habit & UART_HAS_EFR2) + am654_8250_handle_rx_dma(up, iir, status); + else + status = omap_8250_handle_rx_dma(up, iir, status); + } serial8250_modem_status(up); if (status & UART_LSR_THRE && up->dma->tx_err) { -- cgit v1.2.3 From 8e42c301ce64e0dcca547626eb486877d502d336 Mon Sep 17 00:00:00 2001 From: Ronald Wahl Date: Tue, 31 Oct 2023 14:12:42 +0100 Subject: serial: 8250_omap: Add earlycon support for the AM654 UART controller Currently there is no support for earlycon on the AM654 UART controller. This commit adds it. Signed-off-by: Ronald Wahl Reviewed-by: Vignesh Raghavendra Link: https://lore.kernel.org/r/20231031131242.15516-1-rwahl@gmx.de Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/8250/8250_early.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/tty/serial/8250/8250_early.c b/drivers/tty/serial/8250/8250_early.c index 9837a27739fd..e3f482fd3de4 100644 --- a/drivers/tty/serial/8250/8250_early.c +++ b/drivers/tty/serial/8250/8250_early.c @@ -189,5 +189,6 @@ static int __init early_omap8250_setup(struct earlycon_device *device, OF_EARLYCON_DECLARE(omap8250, "ti,omap2-uart", early_omap8250_setup); OF_EARLYCON_DECLARE(omap8250, "ti,omap3-uart", early_omap8250_setup); OF_EARLYCON_DECLARE(omap8250, "ti,omap4-uart", early_omap8250_setup); +OF_EARLYCON_DECLARE(omap8250, "ti,am654-uart", early_omap8250_setup); #endif -- cgit v1.2.3 From 8973ab7a2441b286218f4a5c4c33680e2f139996 Mon Sep 17 00:00:00 2001 From: Ronald Wahl Date: Tue, 31 Oct 2023 12:09:09 +0100 Subject: serial: 8250: 8250_omap: Clear UART_HAS_RHR_IT_DIS bit This fixes commit 439c7183e5b9 ("serial: 8250: 8250_omap: Disable RX interrupt after DMA enable") which unfortunately set the UART_HAS_RHR_IT_DIS bit in the UART_OMAP_IER2 register and never cleared it. Cc: stable@vger.kernel.org Fixes: 439c7183e5b9 ("serial: 8250: 8250_omap: Disable RX interrupt after DMA enable") Signed-off-by: Ronald Wahl Reviewed-by: Vignesh Raghavendra Link: https://lore.kernel.org/r/20231031110909.11695-1-rwahl@gmx.de Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/8250/8250_omap.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/tty/serial/8250/8250_omap.c b/drivers/tty/serial/8250/8250_omap.c index 7d99bc3be0b8..578f35895b27 100644 --- a/drivers/tty/serial/8250/8250_omap.c +++ b/drivers/tty/serial/8250/8250_omap.c @@ -933,7 +933,7 @@ static void __dma_rx_do_complete(struct uart_8250_port *p) if (priv->habit & UART_HAS_RHR_IT_DIS) { reg = serial_in(p, UART_OMAP_IER2); reg &= ~UART_OMAP_IER2_RHR_IT_DIS; - serial_out(p, UART_OMAP_IER2, UART_OMAP_IER2_RHR_IT_DIS); + serial_out(p, UART_OMAP_IER2, reg); } dmaengine_tx_status(rxchan, cookie, &state); @@ -1079,7 +1079,7 @@ static int omap_8250_rx_dma(struct uart_8250_port *p) if (priv->habit & UART_HAS_RHR_IT_DIS) { reg = serial_in(p, UART_OMAP_IER2); reg |= UART_OMAP_IER2_RHR_IT_DIS; - serial_out(p, UART_OMAP_IER2, UART_OMAP_IER2_RHR_IT_DIS); + serial_out(p, UART_OMAP_IER2, reg); } dma_async_issue_pending(dma->rxchan); -- cgit v1.2.3 From 08ce9a1b72e38cf44c300a44ac5858533eb3c860 Mon Sep 17 00:00:00 2001 From: Daniel Mack Date: Thu, 23 Nov 2023 08:28:18 +0100 Subject: serial: sc16is7xx: address RX timeout interrupt errata This device has a silicon bug that makes it report a timeout interrupt but no data in the FIFO. The datasheet states the following in the errata section 18.1.4: "If the host reads the receive FIFO at the same time as a time-out interrupt condition happens, the host might read 0xCC (time-out) in the Interrupt Indication Register (IIR), but bit 0 of the Line Status Register (LSR) is not set (means there is no data in the receive FIFO)." The errata description seems to indicate it concerns only polled mode of operation when reading bit 0 of the LSR register. However, tests have shown and NXP has confirmed that the RXLVL register also yields 0 when the bug is triggered, and hence the IRQ driven implementation in this driver is equally affected. This bug has hit us on production units and when it does, sc16is7xx_irq() would spin forever because sc16is7xx_port_irq() keeps seeing an interrupt in the IIR register that is not cleared because the driver does not call into sc16is7xx_handle_rx() unless the RXLVL register reports at least one byte in the FIFO. Fix this by always reading one byte from the FIFO when this condition is detected in order to clear the interrupt. This approach was confirmed to be correct by NXP through their support channels. Tested by: Hugo Villeneuve Signed-off-by: Daniel Mack Co-Developed-by: Maxim Popov Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20231123072818.1394539-1-daniel@zonque.org Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/sc16is7xx.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/drivers/tty/serial/sc16is7xx.c b/drivers/tty/serial/sc16is7xx.c index db2bb1c0d36c..cf0c6120d30e 100644 --- a/drivers/tty/serial/sc16is7xx.c +++ b/drivers/tty/serial/sc16is7xx.c @@ -766,6 +766,18 @@ static bool sc16is7xx_port_irq(struct sc16is7xx_port *s, int portno) case SC16IS7XX_IIR_RTOI_SRC: case SC16IS7XX_IIR_XOFFI_SRC: rxlen = sc16is7xx_port_read(port, SC16IS7XX_RXLVL_REG); + + /* + * There is a silicon bug that makes the chip report a + * time-out interrupt but no data in the FIFO. This is + * described in errata section 18.1.4. + * + * When this happens, read one byte from the FIFO to + * clear the interrupt. + */ + if (iir == SC16IS7XX_IIR_RTOI_SRC && !rxlen) + rxlen = 1; + if (rxlen) sc16is7xx_handle_rx(port, rxlen, iir); break; -- cgit v1.2.3 From 58ac1b3799799069d53f5bf95c093f2fe8dd3cc5 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Wed, 22 Nov 2023 18:15:03 +0100 Subject: ARM: PL011: Fix DMA support Since there is no guarantee that the memory returned by dma_alloc_coherent() is associated with a 'struct page', using the architecture specific phys_to_page() is wrong, but using virt_to_page() would be as well. Stop using sg lists altogether and just use the *_single() functions instead. This also simplifies the code a bit since the scatterlists in this driver always have only one entry anyway. https://lore.kernel.org/lkml/86db0fe5-930d-4cbb-bd7d-03367da38951@app.fastmail.com/ Use consistent names for dma buffers gc: Add a commit log from the initial thread: https://lore.kernel.org/lkml/86db0fe5-930d-4cbb-bd7d-03367da38951@app.fastmail.com/ Use consistent names for dma buffers Fixes: cb06ff102e2d7 ("ARM: PL011: Add support for Rx DMA buffer polling.") Signed-off-by: Arnd Bergmann Tested-by: Gregory CLEMENT Signed-off-by: Gregory CLEMENT Cc: stable Link: https://lore.kernel.org/r/20231122171503.235649-1-gregory.clement@bootlin.com Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/amba-pl011.c | 112 +++++++++++++++++++--------------------- 1 file changed, 54 insertions(+), 58 deletions(-) diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c index 61cc24cd90e4..b7635363373e 100644 --- a/drivers/tty/serial/amba-pl011.c +++ b/drivers/tty/serial/amba-pl011.c @@ -218,17 +218,18 @@ static struct vendor_data vendor_st = { /* Deals with DMA transactions */ -struct pl011_sgbuf { - struct scatterlist sg; - char *buf; +struct pl011_dmabuf { + dma_addr_t dma; + size_t len; + char *buf; }; struct pl011_dmarx_data { struct dma_chan *chan; struct completion complete; bool use_buf_b; - struct pl011_sgbuf sgbuf_a; - struct pl011_sgbuf sgbuf_b; + struct pl011_dmabuf dbuf_a; + struct pl011_dmabuf dbuf_b; dma_cookie_t cookie; bool running; struct timer_list timer; @@ -241,7 +242,8 @@ struct pl011_dmarx_data { struct pl011_dmatx_data { struct dma_chan *chan; - struct scatterlist sg; + dma_addr_t dma; + size_t len; char *buf; bool queued; }; @@ -366,32 +368,24 @@ static int pl011_fifo_to_tty(struct uart_amba_port *uap) #define PL011_DMA_BUFFER_SIZE PAGE_SIZE -static int pl011_sgbuf_init(struct dma_chan *chan, struct pl011_sgbuf *sg, +static int pl011_dmabuf_init(struct dma_chan *chan, struct pl011_dmabuf *db, enum dma_data_direction dir) { - dma_addr_t dma_addr; - - sg->buf = dma_alloc_coherent(chan->device->dev, - PL011_DMA_BUFFER_SIZE, &dma_addr, GFP_KERNEL); - if (!sg->buf) + db->buf = dma_alloc_coherent(chan->device->dev, PL011_DMA_BUFFER_SIZE, + &db->dma, GFP_KERNEL); + if (!db->buf) return -ENOMEM; - - sg_init_table(&sg->sg, 1); - sg_set_page(&sg->sg, phys_to_page(dma_addr), - PL011_DMA_BUFFER_SIZE, offset_in_page(dma_addr)); - sg_dma_address(&sg->sg) = dma_addr; - sg_dma_len(&sg->sg) = PL011_DMA_BUFFER_SIZE; + db->len = PL011_DMA_BUFFER_SIZE; return 0; } -static void pl011_sgbuf_free(struct dma_chan *chan, struct pl011_sgbuf *sg, +static void pl011_dmabuf_free(struct dma_chan *chan, struct pl011_dmabuf *db, enum dma_data_direction dir) { - if (sg->buf) { + if (db->buf) { dma_free_coherent(chan->device->dev, - PL011_DMA_BUFFER_SIZE, sg->buf, - sg_dma_address(&sg->sg)); + PL011_DMA_BUFFER_SIZE, db->buf, db->dma); } } @@ -552,8 +546,8 @@ static void pl011_dma_tx_callback(void *data) uart_port_lock_irqsave(&uap->port, &flags); if (uap->dmatx.queued) - dma_unmap_sg(dmatx->chan->device->dev, &dmatx->sg, 1, - DMA_TO_DEVICE); + dma_unmap_single(dmatx->chan->device->dev, dmatx->dma, + dmatx->len, DMA_TO_DEVICE); dmacr = uap->dmacr; uap->dmacr = dmacr & ~UART011_TXDMAE; @@ -639,18 +633,19 @@ static int pl011_dma_tx_refill(struct uart_amba_port *uap) memcpy(&dmatx->buf[first], &xmit->buf[0], second); } - dmatx->sg.length = count; - - if (dma_map_sg(dma_dev->dev, &dmatx->sg, 1, DMA_TO_DEVICE) != 1) { + dmatx->len = count; + dmatx->dma = dma_map_single(dma_dev->dev, dmatx->buf, count, + DMA_TO_DEVICE); + if (dmatx->dma == DMA_MAPPING_ERROR) { uap->dmatx.queued = false; dev_dbg(uap->port.dev, "unable to map TX DMA\n"); return -EBUSY; } - desc = dmaengine_prep_slave_sg(chan, &dmatx->sg, 1, DMA_MEM_TO_DEV, + desc = dmaengine_prep_slave_single(chan, dmatx->dma, dmatx->len, DMA_MEM_TO_DEV, DMA_PREP_INTERRUPT | DMA_CTRL_ACK); if (!desc) { - dma_unmap_sg(dma_dev->dev, &dmatx->sg, 1, DMA_TO_DEVICE); + dma_unmap_single(dma_dev->dev, dmatx->dma, dmatx->len, DMA_TO_DEVICE); uap->dmatx.queued = false; /* * If DMA cannot be used right now, we complete this @@ -813,8 +808,8 @@ __acquires(&uap->port.lock) dmaengine_terminate_async(uap->dmatx.chan); if (uap->dmatx.queued) { - dma_unmap_sg(uap->dmatx.chan->device->dev, &uap->dmatx.sg, 1, - DMA_TO_DEVICE); + dma_unmap_single(uap->dmatx.chan->device->dev, uap->dmatx.dma, + uap->dmatx.len, DMA_TO_DEVICE); uap->dmatx.queued = false; uap->dmacr &= ~UART011_TXDMAE; pl011_write(uap->dmacr, uap, REG_DMACR); @@ -828,15 +823,15 @@ static int pl011_dma_rx_trigger_dma(struct uart_amba_port *uap) struct dma_chan *rxchan = uap->dmarx.chan; struct pl011_dmarx_data *dmarx = &uap->dmarx; struct dma_async_tx_descriptor *desc; - struct pl011_sgbuf *sgbuf; + struct pl011_dmabuf *dbuf; if (!rxchan) return -EIO; /* Start the RX DMA job */ - sgbuf = uap->dmarx.use_buf_b ? - &uap->dmarx.sgbuf_b : &uap->dmarx.sgbuf_a; - desc = dmaengine_prep_slave_sg(rxchan, &sgbuf->sg, 1, + dbuf = uap->dmarx.use_buf_b ? + &uap->dmarx.dbuf_b : &uap->dmarx.dbuf_a; + desc = dmaengine_prep_slave_single(rxchan, dbuf->dma, dbuf->len, DMA_DEV_TO_MEM, DMA_PREP_INTERRUPT | DMA_CTRL_ACK); /* @@ -876,8 +871,8 @@ static void pl011_dma_rx_chars(struct uart_amba_port *uap, bool readfifo) { struct tty_port *port = &uap->port.state->port; - struct pl011_sgbuf *sgbuf = use_buf_b ? - &uap->dmarx.sgbuf_b : &uap->dmarx.sgbuf_a; + struct pl011_dmabuf *dbuf = use_buf_b ? + &uap->dmarx.dbuf_b : &uap->dmarx.dbuf_a; int dma_count = 0; u32 fifotaken = 0; /* only used for vdbg() */ @@ -886,7 +881,7 @@ static void pl011_dma_rx_chars(struct uart_amba_port *uap, if (uap->dmarx.poll_rate) { /* The data can be taken by polling */ - dmataken = sgbuf->sg.length - dmarx->last_residue; + dmataken = dbuf->len - dmarx->last_residue; /* Recalculate the pending size */ if (pending >= dmataken) pending -= dmataken; @@ -900,7 +895,7 @@ static void pl011_dma_rx_chars(struct uart_amba_port *uap, * Note that tty_insert_flip_buf() tries to take as many chars * as it can. */ - dma_count = tty_insert_flip_string(port, sgbuf->buf + dmataken, + dma_count = tty_insert_flip_string(port, dbuf->buf + dmataken, pending); uap->port.icount.rx += dma_count; @@ -911,7 +906,7 @@ static void pl011_dma_rx_chars(struct uart_amba_port *uap, /* Reset the last_residue for Rx DMA poll */ if (uap->dmarx.poll_rate) - dmarx->last_residue = sgbuf->sg.length; + dmarx->last_residue = dbuf->len; /* * Only continue with trying to read the FIFO if all DMA chars have @@ -946,8 +941,8 @@ static void pl011_dma_rx_irq(struct uart_amba_port *uap) { struct pl011_dmarx_data *dmarx = &uap->dmarx; struct dma_chan *rxchan = dmarx->chan; - struct pl011_sgbuf *sgbuf = dmarx->use_buf_b ? - &dmarx->sgbuf_b : &dmarx->sgbuf_a; + struct pl011_dmabuf *dbuf = dmarx->use_buf_b ? + &dmarx->dbuf_b : &dmarx->dbuf_a; size_t pending; struct dma_tx_state state; enum dma_status dmastat; @@ -969,7 +964,7 @@ static void pl011_dma_rx_irq(struct uart_amba_port *uap) pl011_write(uap->dmacr, uap, REG_DMACR); uap->dmarx.running = false; - pending = sgbuf->sg.length - state.residue; + pending = dbuf->len - state.residue; BUG_ON(pending > PL011_DMA_BUFFER_SIZE); /* Then we terminate the transfer - we now know our residue */ dmaengine_terminate_all(rxchan); @@ -996,8 +991,8 @@ static void pl011_dma_rx_callback(void *data) struct pl011_dmarx_data *dmarx = &uap->dmarx; struct dma_chan *rxchan = dmarx->chan; bool lastbuf = dmarx->use_buf_b; - struct pl011_sgbuf *sgbuf = dmarx->use_buf_b ? - &dmarx->sgbuf_b : &dmarx->sgbuf_a; + struct pl011_dmabuf *dbuf = dmarx->use_buf_b ? + &dmarx->dbuf_b : &dmarx->dbuf_a; size_t pending; struct dma_tx_state state; int ret; @@ -1015,7 +1010,7 @@ static void pl011_dma_rx_callback(void *data) * the DMA irq handler. So we check the residue here. */ rxchan->device->device_tx_status(rxchan, dmarx->cookie, &state); - pending = sgbuf->sg.length - state.residue; + pending = dbuf->len - state.residue; BUG_ON(pending > PL011_DMA_BUFFER_SIZE); /* Then we terminate the transfer - we now know our residue */ dmaengine_terminate_all(rxchan); @@ -1067,16 +1062,16 @@ static void pl011_dma_rx_poll(struct timer_list *t) unsigned long flags; unsigned int dmataken = 0; unsigned int size = 0; - struct pl011_sgbuf *sgbuf; + struct pl011_dmabuf *dbuf; int dma_count; struct dma_tx_state state; - sgbuf = dmarx->use_buf_b ? &uap->dmarx.sgbuf_b : &uap->dmarx.sgbuf_a; + dbuf = dmarx->use_buf_b ? &uap->dmarx.dbuf_b : &uap->dmarx.dbuf_a; rxchan->device->device_tx_status(rxchan, dmarx->cookie, &state); if (likely(state.residue < dmarx->last_residue)) { - dmataken = sgbuf->sg.length - dmarx->last_residue; + dmataken = dbuf->len - dmarx->last_residue; size = dmarx->last_residue - state.residue; - dma_count = tty_insert_flip_string(port, sgbuf->buf + dmataken, + dma_count = tty_insert_flip_string(port, dbuf->buf + dmataken, size); if (dma_count == size) dmarx->last_residue = state.residue; @@ -1123,7 +1118,7 @@ static void pl011_dma_startup(struct uart_amba_port *uap) return; } - sg_init_one(&uap->dmatx.sg, uap->dmatx.buf, PL011_DMA_BUFFER_SIZE); + uap->dmatx.len = PL011_DMA_BUFFER_SIZE; /* The DMA buffer is now the FIFO the TTY subsystem can use */ uap->port.fifosize = PL011_DMA_BUFFER_SIZE; @@ -1133,7 +1128,7 @@ static void pl011_dma_startup(struct uart_amba_port *uap) goto skip_rx; /* Allocate and map DMA RX buffers */ - ret = pl011_sgbuf_init(uap->dmarx.chan, &uap->dmarx.sgbuf_a, + ret = pl011_dmabuf_init(uap->dmarx.chan, &uap->dmarx.dbuf_a, DMA_FROM_DEVICE); if (ret) { dev_err(uap->port.dev, "failed to init DMA %s: %d\n", @@ -1141,12 +1136,12 @@ static void pl011_dma_startup(struct uart_amba_port *uap) goto skip_rx; } - ret = pl011_sgbuf_init(uap->dmarx.chan, &uap->dmarx.sgbuf_b, + ret = pl011_dmabuf_init(uap->dmarx.chan, &uap->dmarx.dbuf_b, DMA_FROM_DEVICE); if (ret) { dev_err(uap->port.dev, "failed to init DMA %s: %d\n", "RX buffer B", ret); - pl011_sgbuf_free(uap->dmarx.chan, &uap->dmarx.sgbuf_a, + pl011_dmabuf_free(uap->dmarx.chan, &uap->dmarx.dbuf_a, DMA_FROM_DEVICE); goto skip_rx; } @@ -1200,8 +1195,9 @@ static void pl011_dma_shutdown(struct uart_amba_port *uap) /* In theory, this should already be done by pl011_dma_flush_buffer */ dmaengine_terminate_all(uap->dmatx.chan); if (uap->dmatx.queued) { - dma_unmap_sg(uap->dmatx.chan->device->dev, &uap->dmatx.sg, 1, - DMA_TO_DEVICE); + dma_unmap_single(uap->dmatx.chan->device->dev, + uap->dmatx.dma, uap->dmatx.len, + DMA_TO_DEVICE); uap->dmatx.queued = false; } @@ -1212,8 +1208,8 @@ static void pl011_dma_shutdown(struct uart_amba_port *uap) if (uap->using_rx_dma) { dmaengine_terminate_all(uap->dmarx.chan); /* Clean up the RX DMA */ - pl011_sgbuf_free(uap->dmarx.chan, &uap->dmarx.sgbuf_a, DMA_FROM_DEVICE); - pl011_sgbuf_free(uap->dmarx.chan, &uap->dmarx.sgbuf_b, DMA_FROM_DEVICE); + pl011_dmabuf_free(uap->dmarx.chan, &uap->dmarx.dbuf_a, DMA_FROM_DEVICE); + pl011_dmabuf_free(uap->dmarx.chan, &uap->dmarx.dbuf_b, DMA_FROM_DEVICE); if (uap->dmarx.poll_rate) del_timer_sync(&uap->dmarx.timer); uap->using_rx_dma = false; -- cgit v1.2.3 From c0c6bde586c7dce82719b4ff32a2db6af9ee3d65 Mon Sep 17 00:00:00 2001 From: Stanislav Fomichev Date: Mon, 13 Nov 2023 20:54:52 -0800 Subject: netdevsim: Don't accept device bound programs Commit 2b3486bc2d23 ("bpf: Introduce device-bound XDP programs") introduced device-bound programs by largely reusing existing offloading infrastructure. This changed the semantics of 'prog->aux->offload' a bit. Now, it's non-NULL for both offloaded and device-bound programs. Instead of looking at 'prog->aux->offload' let's call bpf_prog_is_offloaded which should be true iff the program is offloaded and not merely device-bound. Fixes: 2b3486bc2d23 ("bpf: Introduce device-bound XDP programs") Reported-by: syzbot+44c2416196b7c607f226@syzkaller.appspotmail.com Signed-off-by: Stanislav Fomichev Signed-off-by: Daniel Borkmann Reviewed-by: Jakub Kicinski Cc: Dipendra Khadka Link: https://lore.kernel.org/bpf/20231114045453.1816995-2-sdf@google.com Signed-off-by: Alexei Starovoitov --- drivers/net/netdevsim/bpf.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/netdevsim/bpf.c b/drivers/net/netdevsim/bpf.c index f60eb97e3a62..608953d4f98d 100644 --- a/drivers/net/netdevsim/bpf.c +++ b/drivers/net/netdevsim/bpf.c @@ -93,7 +93,7 @@ static void nsim_prog_set_loaded(struct bpf_prog *prog, bool loaded) { struct nsim_bpf_bound_prog *state; - if (!prog || !prog->aux->offload) + if (!prog || !bpf_prog_is_offloaded(prog->aux)) return; state = prog->aux->offload->dev_priv; @@ -311,7 +311,7 @@ nsim_setup_prog_hw_checks(struct netdevsim *ns, struct netdev_bpf *bpf) if (!bpf->prog) return 0; - if (!bpf->prog->aux->offload) { + if (!bpf_prog_is_offloaded(bpf->prog->aux)) { NSIM_EA(bpf->extack, "xdpoffload of non-bound program"); return -EINVAL; } -- cgit v1.2.3 From 2db313205f8b96eea467691917138d646bb50aef Mon Sep 17 00:00:00 2001 From: Qu Wenruo Date: Thu, 2 Nov 2023 07:54:50 +1030 Subject: btrfs: add dmesg output for first mount and last unmount of a filesystem There is a feature request to add dmesg output when unmounting a btrfs. There are several alternative methods to do the same thing, but with their own problems: - Use eBPF to watch btrfs_put_super()/open_ctree() Not end user friendly, they have to dip their head into the source code. - Watch for directory /sys/fs// This is way more simple, but still requires some simple device -> uuid lookups. And a script needs to use inotify to watch /sys/fs/. Compared to all these, directly outputting the information into dmesg would be the most simple one, with both device and UUID included. And since we're here, also add the output when mounting a filesystem for the first time for parity. A more fine grained monitoring of subvolume mounts should be done by another layer, like audit. Now mounting a btrfs with all default mkfs options would look like this: [81.906566] BTRFS info (device dm-8): first mount of filesystem 633b5c16-afe3-4b79-b195-138fe145e4f2 [81.907494] BTRFS info (device dm-8): using crc32c (crc32c-intel) checksum algorithm [81.908258] BTRFS info (device dm-8): using free space tree [81.912644] BTRFS info (device dm-8): auto enabling async discard [81.913277] BTRFS info (device dm-8): checking UUID tree [91.668256] BTRFS info (device dm-8): last unmount of filesystem 633b5c16-afe3-4b79-b195-138fe145e4f2 CC: stable@vger.kernel.org # 5.4+ Link: https://github.com/kdave/btrfs-progs/issues/689 Reviewed-by: Anand Jain Signed-off-by: Qu Wenruo Reviewed-by: David Sterba [ update changelog ] Signed-off-by: David Sterba --- fs/btrfs/disk-io.c | 1 + fs/btrfs/super.c | 5 ++++- 2 files changed, 5 insertions(+), 1 deletion(-) diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c index 401ea09ae4b8..bbcc3df77646 100644 --- a/fs/btrfs/disk-io.c +++ b/fs/btrfs/disk-io.c @@ -3213,6 +3213,7 @@ int __cold open_ctree(struct super_block *sb, struct btrfs_fs_devices *fs_device goto fail_alloc; } + btrfs_info(fs_info, "first mount of filesystem %pU", disk_super->fsid); /* * Verify the type first, if that or the checksum value are * corrupted, we'll find out diff --git a/fs/btrfs/super.c b/fs/btrfs/super.c index 6ecf78d09694..9e1f3dbc80fa 100644 --- a/fs/btrfs/super.c +++ b/fs/btrfs/super.c @@ -80,7 +80,10 @@ static int btrfs_remount(struct super_block *sb, int *flags, char *data); static void btrfs_put_super(struct super_block *sb) { - close_ctree(btrfs_sb(sb)); + struct btrfs_fs_info *fs_info = btrfs_sb(sb); + + btrfs_info(fs_info, "last unmount of filesystem %pU", fs_info->fs_devices->fsid); + close_ctree(fs_info); } enum { -- cgit v1.2.3 From f91192cd68591c6b037da345bc9fcd5e50540358 Mon Sep 17 00:00:00 2001 From: Bragatheswaran Manickavel Date: Sat, 18 Nov 2023 14:40:12 +0530 Subject: btrfs: ref-verify: fix memory leaks in btrfs_ref_tree_mod() In btrfs_ref_tree_mod(), when !parent 're' was allocated through kmalloc(). In the following code, if an error occurs, the execution will be redirected to 'out' or 'out_unlock' and the function will be exited. However, on some of the paths, 're' are not deallocated and may lead to memory leaks. For example: lookup_block_entry() for 'be' returns NULL, the out label will be invoked. During that flow ref and 'ra' are freed but not 're', which can potentially lead to a memory leak. CC: stable@vger.kernel.org # 5.10+ Reported-and-tested-by: syzbot+d66de4cbf532749df35f@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=d66de4cbf532749df35f Signed-off-by: Bragatheswaran Manickavel Reviewed-by: David Sterba Signed-off-by: David Sterba --- fs/btrfs/ref-verify.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/fs/btrfs/ref-verify.c b/fs/btrfs/ref-verify.c index 1f62976bee82..6486f0d7e993 100644 --- a/fs/btrfs/ref-verify.c +++ b/fs/btrfs/ref-verify.c @@ -794,6 +794,7 @@ int btrfs_ref_tree_mod(struct btrfs_fs_info *fs_info, dump_ref_action(fs_info, ra); kfree(ref); kfree(ra); + kfree(re); goto out_unlock; } else if (be->num_refs == 0) { btrfs_err(fs_info, @@ -803,6 +804,7 @@ int btrfs_ref_tree_mod(struct btrfs_fs_info *fs_info, dump_ref_action(fs_info, ra); kfree(ref); kfree(ra); + kfree(re); goto out_unlock; } -- cgit v1.2.3 From 5fba5a571858ce2d787fdaf55814e42725bfa895 Mon Sep 17 00:00:00 2001 From: Filipe Manana Date: Tue, 21 Nov 2023 13:38:32 +0000 Subject: btrfs: fix off-by-one when checking chunk map includes logical address At btrfs_get_chunk_map() we get the extent map for the chunk that contains the given logical address stored in the 'logical' argument. Then we do sanity checks to verify the extent map contains the logical address. One of these checks verifies if the extent map covers a range with an end offset behind the target logical address - however this check has an off-by-one error since it will consider an extent map whose start offset plus its length matches the target logical address as inclusive, while the fact is that the last byte it covers is behind the target logical address (by 1). So fix this condition by using '<=' rather than '<' when comparing the extent map's "start + length" against the target logical address. CC: stable@vger.kernel.org # 4.14+ Reviewed-by: Josef Bacik Signed-off-by: Filipe Manana Reviewed-by: David Sterba Signed-off-by: David Sterba --- fs/btrfs/volumes.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c index dd279241f78c..1775ae0998b0 100644 --- a/fs/btrfs/volumes.c +++ b/fs/btrfs/volumes.c @@ -3008,7 +3008,7 @@ struct extent_map *btrfs_get_chunk_map(struct btrfs_fs_info *fs_info, return ERR_PTR(-EINVAL); } - if (em->start > logical || em->start + em->len < logical) { + if (em->start > logical || em->start + em->len <= logical) { btrfs_crit(fs_info, "found a bad mapping, wanted %llu-%llu, found %llu-%llu", logical, length, em->start, em->start + em->len); -- cgit v1.2.3 From 7d410d5efe04e42a6cd959bfe6d59d559fdf8b25 Mon Sep 17 00:00:00 2001 From: Filipe Manana Date: Tue, 21 Nov 2023 13:38:33 +0000 Subject: btrfs: make error messages more clear when getting a chunk map When getting a chunk map, at btrfs_get_chunk_map(), we do some sanity checks to verify we found a chunk map and that map found covers the logical address the caller passed in. However the messages aren't very clear in the sense that don't mention the issue is with a chunk map and one of them prints the 'length' argument as if it were the end offset of the requested range (while the in the string format we use %llu-%llu which suggests a range, and the second %llu-%llu is actually a range for the chunk map). So improve these two details in the error messages. CC: stable@vger.kernel.org # 5.4+ Reviewed-by: Josef Bacik Signed-off-by: Filipe Manana Reviewed-by: David Sterba Signed-off-by: David Sterba --- fs/btrfs/volumes.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c index 1775ae0998b0..3b61c47306c0 100644 --- a/fs/btrfs/volumes.c +++ b/fs/btrfs/volumes.c @@ -3003,15 +3003,16 @@ struct extent_map *btrfs_get_chunk_map(struct btrfs_fs_info *fs_info, read_unlock(&em_tree->lock); if (!em) { - btrfs_crit(fs_info, "unable to find logical %llu length %llu", + btrfs_crit(fs_info, + "unable to find chunk map for logical %llu length %llu", logical, length); return ERR_PTR(-EINVAL); } if (em->start > logical || em->start + em->len <= logical) { btrfs_crit(fs_info, - "found a bad mapping, wanted %llu-%llu, found %llu-%llu", - logical, length, em->start, em->start + em->len); + "found a bad chunk map, wanted %llu-%llu, found %llu-%llu", + logical, logical + length, em->start, em->start + em->len); free_extent_map(em); return ERR_PTR(-EINVAL); } -- cgit v1.2.3 From 109b25d13e0054337860d44841b990d11b32d262 Mon Sep 17 00:00:00 2001 From: Yoshihiro Shimoda Date: Wed, 22 Nov 2023 14:11:41 +0900 Subject: net: rswitch: Fix type of ret in rswitch_start_xmit() The type of ret in rswitch_start_xmit() should be netdev_tx_t. So, fix it. Fixes: 3590918b5d07 ("net: ethernet: renesas: Add support for "Ethernet Switch"") Signed-off-by: Yoshihiro Shimoda Reviewed-by: Wojciech Drewek Signed-off-by: David S. Miller --- drivers/net/ethernet/renesas/rswitch.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/renesas/rswitch.c b/drivers/net/ethernet/renesas/rswitch.c index 43a7795d6591..d53d90020904 100644 --- a/drivers/net/ethernet/renesas/rswitch.c +++ b/drivers/net/ethernet/renesas/rswitch.c @@ -1504,8 +1504,8 @@ static netdev_tx_t rswitch_start_xmit(struct sk_buff *skb, struct net_device *nd { struct rswitch_device *rdev = netdev_priv(ndev); struct rswitch_gwca_queue *gq = rdev->tx_queue; + netdev_tx_t ret = NETDEV_TX_OK; struct rswitch_ext_desc *desc; - int ret = NETDEV_TX_OK; dma_addr_t dma_addr; if (rswitch_get_num_cur_queues(gq) >= gq->ring_size - 1) { -- cgit v1.2.3 From 1aaef8634a20b322c82e84f12a9b6aec1e2fd4fa Mon Sep 17 00:00:00 2001 From: Yoshihiro Shimoda Date: Wed, 22 Nov 2023 14:11:42 +0900 Subject: net: rswitch: Fix return value in rswitch_start_xmit() This .ndo_start_xmit() function should return netdev_tx_t value, not -ENOMEM. So, fix it. Fixes: 33f5d733b589 ("net: renesas: rswitch: Improve TX timestamp accuracy") Signed-off-by: Yoshihiro Shimoda Reviewed-by: Wojciech Drewek Signed-off-by: David S. Miller --- drivers/net/ethernet/renesas/rswitch.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/renesas/rswitch.c b/drivers/net/ethernet/renesas/rswitch.c index d53d90020904..45bf9808c143 100644 --- a/drivers/net/ethernet/renesas/rswitch.c +++ b/drivers/net/ethernet/renesas/rswitch.c @@ -1535,7 +1535,7 @@ static netdev_tx_t rswitch_start_xmit(struct sk_buff *skb, struct net_device *nd ts_info = kzalloc(sizeof(*ts_info), GFP_ATOMIC); if (!ts_info) { dma_unmap_single(ndev->dev.parent, dma_addr, skb->len, DMA_TO_DEVICE); - return -ENOMEM; + return ret; } skb_shinfo(skb)->tx_flags |= SKBTX_IN_PROGRESS; -- cgit v1.2.3 From 782486af9b5b76493012711413c141509ac45dec Mon Sep 17 00:00:00 2001 From: Yoshihiro Shimoda Date: Wed, 22 Nov 2023 14:11:43 +0900 Subject: net: rswitch: Fix missing dev_kfree_skb_any() in error path Before returning the rswitch_start_xmit() in the error path, dev_kfree_skb_any() should be called. So, fix it. Fixes: 33f5d733b589 ("net: renesas: rswitch: Improve TX timestamp accuracy") Signed-off-by: Yoshihiro Shimoda Reviewed-by: Wojciech Drewek Signed-off-by: David S. Miller --- drivers/net/ethernet/renesas/rswitch.c | 20 ++++++++++++-------- 1 file changed, 12 insertions(+), 8 deletions(-) diff --git a/drivers/net/ethernet/renesas/rswitch.c b/drivers/net/ethernet/renesas/rswitch.c index 45bf9808c143..e77c6ff93d81 100644 --- a/drivers/net/ethernet/renesas/rswitch.c +++ b/drivers/net/ethernet/renesas/rswitch.c @@ -1517,10 +1517,8 @@ static netdev_tx_t rswitch_start_xmit(struct sk_buff *skb, struct net_device *nd return ret; dma_addr = dma_map_single(ndev->dev.parent, skb->data, skb->len, DMA_TO_DEVICE); - if (dma_mapping_error(ndev->dev.parent, dma_addr)) { - dev_kfree_skb_any(skb); - return ret; - } + if (dma_mapping_error(ndev->dev.parent, dma_addr)) + goto err_kfree; gq->skbs[gq->cur] = skb; desc = &gq->tx_ring[gq->cur]; @@ -1533,10 +1531,8 @@ static netdev_tx_t rswitch_start_xmit(struct sk_buff *skb, struct net_device *nd struct rswitch_gwca_ts_info *ts_info; ts_info = kzalloc(sizeof(*ts_info), GFP_ATOMIC); - if (!ts_info) { - dma_unmap_single(ndev->dev.parent, dma_addr, skb->len, DMA_TO_DEVICE); - return ret; - } + if (!ts_info) + goto err_unmap; skb_shinfo(skb)->tx_flags |= SKBTX_IN_PROGRESS; rdev->ts_tag++; @@ -1558,6 +1554,14 @@ static netdev_tx_t rswitch_start_xmit(struct sk_buff *skb, struct net_device *nd gq->cur = rswitch_next_queue_index(gq, true, 1); rswitch_modify(rdev->addr, GWTRC(gq->index), 0, BIT(gq->index % 32)); + return ret; + +err_unmap: + dma_unmap_single(ndev->dev.parent, dma_addr, skb->len, DMA_TO_DEVICE); + +err_kfree: + dev_kfree_skb_any(skb); + return ret; } -- cgit v1.2.3 From 90044481e7cca6cb3125b3906544954a25f1309f Mon Sep 17 00:00:00 2001 From: Zongmin Zhou Date: Mon, 20 Nov 2023 23:48:17 +0900 Subject: ksmbd: prevent memory leak on error return When allocated memory for 'new' failed,just return will cause memory leak of 'ar'. Fixes: 1819a9042999 ("ksmbd: reorganize ksmbd_iov_pin_rsp()") Reported-by: kernel test robot Reported-by: Dan Carpenter Closes: https://lore.kernel.org/r/202311031837.H3yo7JVl-lkp@intel.com/ Signed-off-by: Zongmin Zhou Acked-by: Namjae Jeon Signed-off-by: Steve French --- fs/smb/server/ksmbd_work.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/fs/smb/server/ksmbd_work.c b/fs/smb/server/ksmbd_work.c index a2ed441e837a..2510b9f3c8c1 100644 --- a/fs/smb/server/ksmbd_work.c +++ b/fs/smb/server/ksmbd_work.c @@ -106,7 +106,7 @@ static inline void __ksmbd_iov_pin(struct ksmbd_work *work, void *ib, static int __ksmbd_iov_pin_rsp(struct ksmbd_work *work, void *ib, int len, void *aux_buf, unsigned int aux_size) { - struct aux_read *ar; + struct aux_read *ar = NULL; int need_iov_cnt = 1; if (aux_size) { @@ -123,8 +123,11 @@ static int __ksmbd_iov_pin_rsp(struct ksmbd_work *work, void *ib, int len, new = krealloc(work->iov, sizeof(struct kvec) * work->iov_alloc_cnt, GFP_KERNEL | __GFP_ZERO); - if (!new) + if (!new) { + kfree(ar); + work->iov_alloc_cnt -= 4; return -ENOMEM; + } work->iov = new; } -- cgit v1.2.3 From 864fb5d3716303a045c3ffb397f651bfd37bfb36 Mon Sep 17 00:00:00 2001 From: Namjae Jeon Date: Mon, 20 Nov 2023 09:23:09 +0900 Subject: ksmbd: fix possible deadlock in smb2_open [ 8743.393379] ====================================================== [ 8743.393385] WARNING: possible circular locking dependency detected [ 8743.393391] 6.4.0-rc1+ #11 Tainted: G OE [ 8743.393397] ------------------------------------------------------ [ 8743.393402] kworker/0:2/12921 is trying to acquire lock: [ 8743.393408] ffff888127a14460 (sb_writers#8){.+.+}-{0:0}, at: ksmbd_vfs_setxattr+0x3d/0xd0 [ksmbd] [ 8743.393510] but task is already holding lock: [ 8743.393515] ffff8880360d97f0 (&type->i_mutex_dir_key#6/1){+.+.}-{3:3}, at: ksmbd_vfs_kern_path_locked+0x181/0x670 [ksmbd] [ 8743.393618] which lock already depends on the new lock. [ 8743.393623] the existing dependency chain (in reverse order) is: [ 8743.393628] -> #1 (&type->i_mutex_dir_key#6/1){+.+.}-{3:3}: [ 8743.393648] down_write_nested+0x9a/0x1b0 [ 8743.393660] filename_create+0x128/0x270 [ 8743.393670] do_mkdirat+0xab/0x1f0 [ 8743.393680] __x64_sys_mkdir+0x47/0x60 [ 8743.393690] do_syscall_64+0x5d/0x90 [ 8743.393701] entry_SYSCALL_64_after_hwframe+0x72/0xdc [ 8743.393711] -> #0 (sb_writers#8){.+.+}-{0:0}: [ 8743.393728] __lock_acquire+0x2201/0x3b80 [ 8743.393737] lock_acquire+0x18f/0x440 [ 8743.393746] mnt_want_write+0x5f/0x240 [ 8743.393755] ksmbd_vfs_setxattr+0x3d/0xd0 [ksmbd] [ 8743.393839] ksmbd_vfs_set_dos_attrib_xattr+0xcc/0x110 [ksmbd] [ 8743.393924] compat_ksmbd_vfs_set_dos_attrib_xattr+0x39/0x50 [ksmbd] [ 8743.394010] smb2_open+0x3432/0x3cc0 [ksmbd] [ 8743.394099] handle_ksmbd_work+0x2c9/0x7b0 [ksmbd] [ 8743.394187] process_one_work+0x65a/0xb30 [ 8743.394198] worker_thread+0x2cf/0x700 [ 8743.394209] kthread+0x1ad/0x1f0 [ 8743.394218] ret_from_fork+0x29/0x50 This patch add mnt_want_write() above parent inode lock and remove nested mnt_want_write calls in smb2_open(). Fixes: 40b268d384a2 ("ksmbd: add mnt_want_write to ksmbd vfs functions") Cc: stable@vger.kernel.org Reported-by: Marios Makassikis Signed-off-by: Namjae Jeon Signed-off-by: Steve French --- fs/smb/server/smb2pdu.c | 47 ++++++++++++++++------------------ fs/smb/server/smbacl.c | 7 ++--- fs/smb/server/smbacl.h | 2 +- fs/smb/server/vfs.c | 68 +++++++++++++++++++++++++++++-------------------- fs/smb/server/vfs.h | 10 +++++--- 5 files changed, 75 insertions(+), 59 deletions(-) diff --git a/fs/smb/server/smb2pdu.c b/fs/smb/server/smb2pdu.c index 658209839729..c996264db2c6 100644 --- a/fs/smb/server/smb2pdu.c +++ b/fs/smb/server/smb2pdu.c @@ -2380,7 +2380,8 @@ static int smb2_set_ea(struct smb2_ea_info *eabuf, unsigned int buf_len, rc = 0; } else { rc = ksmbd_vfs_setxattr(idmap, path, attr_name, value, - le16_to_cpu(eabuf->EaValueLength), 0); + le16_to_cpu(eabuf->EaValueLength), + 0, true); if (rc < 0) { ksmbd_debug(SMB, "ksmbd_vfs_setxattr is failed(%d)\n", @@ -2443,7 +2444,7 @@ static noinline int smb2_set_stream_name_xattr(const struct path *path, return -EBADF; } - rc = ksmbd_vfs_setxattr(idmap, path, xattr_stream_name, NULL, 0, 0); + rc = ksmbd_vfs_setxattr(idmap, path, xattr_stream_name, NULL, 0, 0, false); if (rc < 0) pr_err("Failed to store XATTR stream name :%d\n", rc); return 0; @@ -2518,7 +2519,7 @@ static void smb2_new_xattrs(struct ksmbd_tree_connect *tcon, const struct path * da.flags = XATTR_DOSINFO_ATTRIB | XATTR_DOSINFO_CREATE_TIME | XATTR_DOSINFO_ITIME; - rc = ksmbd_vfs_set_dos_attrib_xattr(mnt_idmap(path->mnt), path, &da); + rc = ksmbd_vfs_set_dos_attrib_xattr(mnt_idmap(path->mnt), path, &da, false); if (rc) ksmbd_debug(SMB, "failed to store file attribute into xattr\n"); } @@ -2608,7 +2609,7 @@ static int smb2_create_sd_buffer(struct ksmbd_work *work, sizeof(struct create_sd_buf_req)) return -EINVAL; return set_info_sec(work->conn, work->tcon, path, &sd_buf->ntsd, - le32_to_cpu(sd_buf->ccontext.DataLength), true); + le32_to_cpu(sd_buf->ccontext.DataLength), true, false); } static void ksmbd_acls_fattr(struct smb_fattr *fattr, @@ -3152,7 +3153,8 @@ int smb2_open(struct ksmbd_work *work) idmap, &path, pntsd, - pntsd_size); + pntsd_size, + false); kfree(pntsd); if (rc) pr_err("failed to store ntacl in xattr : %d\n", @@ -3228,12 +3230,6 @@ int smb2_open(struct ksmbd_work *work) if (req->CreateOptions & FILE_DELETE_ON_CLOSE_LE) ksmbd_fd_set_delete_on_close(fp, file_info); - if (need_truncate) { - rc = smb2_create_truncate(&path); - if (rc) - goto err_out; - } - if (req->CreateContextsOffset) { struct create_alloc_size_req *az_req; @@ -3398,11 +3394,12 @@ int smb2_open(struct ksmbd_work *work) } err_out: - if (file_present || created) { - inode_unlock(d_inode(parent_path.dentry)); - path_put(&path); - path_put(&parent_path); - } + if (file_present || created) + ksmbd_vfs_kern_path_unlock(&parent_path, &path); + + if (fp && need_truncate) + rc = smb2_create_truncate(&fp->filp->f_path); + ksmbd_revert_fsids(work); err_out1: if (!rc) { @@ -5537,7 +5534,7 @@ static int smb2_rename(struct ksmbd_work *work, rc = ksmbd_vfs_setxattr(file_mnt_idmap(fp->filp), &fp->filp->f_path, xattr_stream_name, - NULL, 0, 0); + NULL, 0, 0, true); if (rc < 0) { pr_err("failed to store stream name in xattr: %d\n", rc); @@ -5630,11 +5627,9 @@ static int smb2_create_link(struct ksmbd_work *work, if (rc) rc = -EINVAL; out: - if (file_present) { - inode_unlock(d_inode(parent_path.dentry)); - path_put(&path); - path_put(&parent_path); - } + if (file_present) + ksmbd_vfs_kern_path_unlock(&parent_path, &path); + if (!IS_ERR(link_name)) kfree(link_name); kfree(pathname); @@ -5701,7 +5696,8 @@ static int set_file_basic_info(struct ksmbd_file *fp, da.flags = XATTR_DOSINFO_ATTRIB | XATTR_DOSINFO_CREATE_TIME | XATTR_DOSINFO_ITIME; - rc = ksmbd_vfs_set_dos_attrib_xattr(idmap, &filp->f_path, &da); + rc = ksmbd_vfs_set_dos_attrib_xattr(idmap, &filp->f_path, &da, + true); if (rc) ksmbd_debug(SMB, "failed to restore file attribute in EA\n"); @@ -6013,7 +6009,7 @@ static int smb2_set_info_sec(struct ksmbd_file *fp, int addition_info, fp->saccess |= FILE_SHARE_DELETE_LE; return set_info_sec(fp->conn, fp->tcon, &fp->filp->f_path, pntsd, - buf_len, false); + buf_len, false, true); } /** @@ -7582,7 +7578,8 @@ static inline int fsctl_set_sparse(struct ksmbd_work *work, u64 id, da.attr = le32_to_cpu(fp->f_ci->m_fattr); ret = ksmbd_vfs_set_dos_attrib_xattr(idmap, - &fp->filp->f_path, &da); + &fp->filp->f_path, + &da, true); if (ret) fp->f_ci->m_fattr = old_fattr; } diff --git a/fs/smb/server/smbacl.c b/fs/smb/server/smbacl.c index 51b8bfab7481..1164365533f0 100644 --- a/fs/smb/server/smbacl.c +++ b/fs/smb/server/smbacl.c @@ -1185,7 +1185,7 @@ pass: pntsd_size += sizeof(struct smb_acl) + nt_size; } - ksmbd_vfs_set_sd_xattr(conn, idmap, path, pntsd, pntsd_size); + ksmbd_vfs_set_sd_xattr(conn, idmap, path, pntsd, pntsd_size, false); kfree(pntsd); } @@ -1377,7 +1377,7 @@ err_out: int set_info_sec(struct ksmbd_conn *conn, struct ksmbd_tree_connect *tcon, const struct path *path, struct smb_ntsd *pntsd, int ntsd_len, - bool type_check) + bool type_check, bool get_write) { int rc; struct smb_fattr fattr = {{0}}; @@ -1437,7 +1437,8 @@ int set_info_sec(struct ksmbd_conn *conn, struct ksmbd_tree_connect *tcon, if (test_share_config_flag(tcon->share_conf, KSMBD_SHARE_FLAG_ACL_XATTR)) { /* Update WinACL in xattr */ ksmbd_vfs_remove_sd_xattrs(idmap, path); - ksmbd_vfs_set_sd_xattr(conn, idmap, path, pntsd, ntsd_len); + ksmbd_vfs_set_sd_xattr(conn, idmap, path, pntsd, ntsd_len, + get_write); } out: diff --git a/fs/smb/server/smbacl.h b/fs/smb/server/smbacl.h index 49a8c292bd2e..2b52861707d8 100644 --- a/fs/smb/server/smbacl.h +++ b/fs/smb/server/smbacl.h @@ -207,7 +207,7 @@ int smb_check_perm_dacl(struct ksmbd_conn *conn, const struct path *path, __le32 *pdaccess, int uid); int set_info_sec(struct ksmbd_conn *conn, struct ksmbd_tree_connect *tcon, const struct path *path, struct smb_ntsd *pntsd, int ntsd_len, - bool type_check); + bool type_check, bool get_write); void id_to_sid(unsigned int cid, uint sidtype, struct smb_sid *ssid); void ksmbd_init_domain(u32 *sub_auth); diff --git a/fs/smb/server/vfs.c b/fs/smb/server/vfs.c index c53dea5598fc..533257b46fc1 100644 --- a/fs/smb/server/vfs.c +++ b/fs/smb/server/vfs.c @@ -97,6 +97,13 @@ static int ksmbd_vfs_path_lookup_locked(struct ksmbd_share_config *share_conf, return -ENOENT; } + err = mnt_want_write(parent_path->mnt); + if (err) { + path_put(parent_path); + putname(filename); + return -ENOENT; + } + inode_lock_nested(parent_path->dentry->d_inode, I_MUTEX_PARENT); d = lookup_one_qstr_excl(&last, parent_path->dentry, 0); if (IS_ERR(d)) @@ -123,6 +130,7 @@ static int ksmbd_vfs_path_lookup_locked(struct ksmbd_share_config *share_conf, err_out: inode_unlock(d_inode(parent_path->dentry)); + mnt_drop_write(parent_path->mnt); path_put(parent_path); putname(filename); return -ENOENT; @@ -451,7 +459,8 @@ static int ksmbd_vfs_stream_write(struct ksmbd_file *fp, char *buf, loff_t *pos, fp->stream.name, (void *)stream_buf, size, - 0); + 0, + true); if (err < 0) goto out; @@ -593,10 +602,6 @@ int ksmbd_vfs_remove_file(struct ksmbd_work *work, const struct path *path) goto out_err; } - err = mnt_want_write(path->mnt); - if (err) - goto out_err; - idmap = mnt_idmap(path->mnt); if (S_ISDIR(d_inode(path->dentry)->i_mode)) { err = vfs_rmdir(idmap, d_inode(parent), path->dentry); @@ -607,7 +612,6 @@ int ksmbd_vfs_remove_file(struct ksmbd_work *work, const struct path *path) if (err) ksmbd_debug(VFS, "unlink failed, err %d\n", err); } - mnt_drop_write(path->mnt); out_err: ksmbd_revert_fsids(work); @@ -907,18 +911,22 @@ ssize_t ksmbd_vfs_getxattr(struct mnt_idmap *idmap, * @attr_value: xattr value to set * @attr_size: size of xattr value * @flags: destination buffer length + * @get_write: get write access to a mount * * Return: 0 on success, otherwise error */ int ksmbd_vfs_setxattr(struct mnt_idmap *idmap, const struct path *path, const char *attr_name, - void *attr_value, size_t attr_size, int flags) + void *attr_value, size_t attr_size, int flags, + bool get_write) { int err; - err = mnt_want_write(path->mnt); - if (err) - return err; + if (get_write == true) { + err = mnt_want_write(path->mnt); + if (err) + return err; + } err = vfs_setxattr(idmap, path->dentry, @@ -928,7 +936,8 @@ int ksmbd_vfs_setxattr(struct mnt_idmap *idmap, flags); if (err) ksmbd_debug(VFS, "setxattr failed, err %d\n", err); - mnt_drop_write(path->mnt); + if (get_write == true) + mnt_drop_write(path->mnt); return err; } @@ -1252,6 +1261,13 @@ out1: } if (!err) { + err = mnt_want_write(parent_path->mnt); + if (err) { + path_put(path); + path_put(parent_path); + return err; + } + err = ksmbd_vfs_lock_parent(parent_path->dentry, path->dentry); if (err) { path_put(path); @@ -1261,6 +1277,14 @@ out1: return err; } +void ksmbd_vfs_kern_path_unlock(struct path *parent_path, struct path *path) +{ + inode_unlock(d_inode(parent_path->dentry)); + mnt_drop_write(parent_path->mnt); + path_put(path); + path_put(parent_path); +} + struct dentry *ksmbd_vfs_kern_path_create(struct ksmbd_work *work, const char *name, unsigned int flags, @@ -1415,7 +1439,8 @@ out: int ksmbd_vfs_set_sd_xattr(struct ksmbd_conn *conn, struct mnt_idmap *idmap, const struct path *path, - struct smb_ntsd *pntsd, int len) + struct smb_ntsd *pntsd, int len, + bool get_write) { int rc; struct ndr sd_ndr = {0}, acl_ndr = {0}; @@ -1475,7 +1500,7 @@ int ksmbd_vfs_set_sd_xattr(struct ksmbd_conn *conn, rc = ksmbd_vfs_setxattr(idmap, path, XATTR_NAME_SD, sd_ndr.data, - sd_ndr.offset, 0); + sd_ndr.offset, 0, get_write); if (rc < 0) pr_err("Failed to store XATTR ntacl :%d\n", rc); @@ -1564,7 +1589,8 @@ free_n_data: int ksmbd_vfs_set_dos_attrib_xattr(struct mnt_idmap *idmap, const struct path *path, - struct xattr_dos_attrib *da) + struct xattr_dos_attrib *da, + bool get_write) { struct ndr n; int err; @@ -1574,7 +1600,7 @@ int ksmbd_vfs_set_dos_attrib_xattr(struct mnt_idmap *idmap, return err; err = ksmbd_vfs_setxattr(idmap, path, XATTR_NAME_DOS_ATTRIBUTE, - (void *)n.data, n.offset, 0); + (void *)n.data, n.offset, 0, get_write); if (err) ksmbd_debug(SMB, "failed to store dos attribute in xattr\n"); kfree(n.data); @@ -1846,10 +1872,6 @@ int ksmbd_vfs_set_init_posix_acl(struct mnt_idmap *idmap, } posix_state_to_acl(&acl_state, acls->a_entries); - rc = mnt_want_write(path->mnt); - if (rc) - goto out_err; - rc = set_posix_acl(idmap, dentry, ACL_TYPE_ACCESS, acls); if (rc < 0) ksmbd_debug(SMB, "Set posix acl(ACL_TYPE_ACCESS) failed, rc : %d\n", @@ -1861,9 +1883,7 @@ int ksmbd_vfs_set_init_posix_acl(struct mnt_idmap *idmap, ksmbd_debug(SMB, "Set posix acl(ACL_TYPE_DEFAULT) failed, rc : %d\n", rc); } - mnt_drop_write(path->mnt); -out_err: free_acl_state(&acl_state); posix_acl_release(acls); return rc; @@ -1893,10 +1913,6 @@ int ksmbd_vfs_inherit_posix_acl(struct mnt_idmap *idmap, } } - rc = mnt_want_write(path->mnt); - if (rc) - goto out_err; - rc = set_posix_acl(idmap, dentry, ACL_TYPE_ACCESS, acls); if (rc < 0) ksmbd_debug(SMB, "Set posix acl(ACL_TYPE_ACCESS) failed, rc : %d\n", @@ -1908,9 +1924,7 @@ int ksmbd_vfs_inherit_posix_acl(struct mnt_idmap *idmap, ksmbd_debug(SMB, "Set posix acl(ACL_TYPE_DEFAULT) failed, rc : %d\n", rc); } - mnt_drop_write(path->mnt); -out_err: posix_acl_release(acls); return rc; } diff --git a/fs/smb/server/vfs.h b/fs/smb/server/vfs.h index 00968081856e..cfe1c8092f23 100644 --- a/fs/smb/server/vfs.h +++ b/fs/smb/server/vfs.h @@ -109,7 +109,8 @@ ssize_t ksmbd_vfs_casexattr_len(struct mnt_idmap *idmap, int attr_name_len); int ksmbd_vfs_setxattr(struct mnt_idmap *idmap, const struct path *path, const char *attr_name, - void *attr_value, size_t attr_size, int flags); + void *attr_value, size_t attr_size, int flags, + bool get_write); int ksmbd_vfs_xattr_stream_name(char *stream_name, char **xattr_stream_name, size_t *xattr_stream_name_size, int s_type); int ksmbd_vfs_remove_xattr(struct mnt_idmap *idmap, @@ -117,6 +118,7 @@ int ksmbd_vfs_remove_xattr(struct mnt_idmap *idmap, int ksmbd_vfs_kern_path_locked(struct ksmbd_work *work, char *name, unsigned int flags, struct path *parent_path, struct path *path, bool caseless); +void ksmbd_vfs_kern_path_unlock(struct path *parent_path, struct path *path); struct dentry *ksmbd_vfs_kern_path_create(struct ksmbd_work *work, const char *name, unsigned int flags, @@ -144,14 +146,16 @@ int ksmbd_vfs_remove_sd_xattrs(struct mnt_idmap *idmap, const struct path *path) int ksmbd_vfs_set_sd_xattr(struct ksmbd_conn *conn, struct mnt_idmap *idmap, const struct path *path, - struct smb_ntsd *pntsd, int len); + struct smb_ntsd *pntsd, int len, + bool get_write); int ksmbd_vfs_get_sd_xattr(struct ksmbd_conn *conn, struct mnt_idmap *idmap, struct dentry *dentry, struct smb_ntsd **pntsd); int ksmbd_vfs_set_dos_attrib_xattr(struct mnt_idmap *idmap, const struct path *path, - struct xattr_dos_attrib *da); + struct xattr_dos_attrib *da, + bool get_write); int ksmbd_vfs_get_dos_attrib_xattr(struct mnt_idmap *idmap, struct dentry *dentry, struct xattr_dos_attrib *da); -- cgit v1.2.3 From 4274a9dc6aeb9fea66bffba15697a35ae8983b6a Mon Sep 17 00:00:00 2001 From: Namjae Jeon Date: Mon, 20 Nov 2023 09:13:54 +0900 Subject: ksmbd: separately allocate ci per dentry xfstests generic/002 test fail when enabling smb2 leases feature. This test create hard link file, but removeal failed. ci has a file open count to count file open through the smb client, but in the case of hard link files, The allocation of ci per inode cause incorrectly open count for file deletion. This patch allocate ci per dentry to counts open counts for hard link. Signed-off-by: Namjae Jeon Signed-off-by: Steve French --- fs/smb/server/smb2pdu.c | 2 +- fs/smb/server/vfs.c | 2 +- fs/smb/server/vfs_cache.c | 33 +++++++++++++-------------------- fs/smb/server/vfs_cache.h | 6 +++--- 4 files changed, 18 insertions(+), 25 deletions(-) diff --git a/fs/smb/server/smb2pdu.c b/fs/smb/server/smb2pdu.c index c996264db2c6..ac4204955a85 100644 --- a/fs/smb/server/smb2pdu.c +++ b/fs/smb/server/smb2pdu.c @@ -3039,7 +3039,7 @@ int smb2_open(struct ksmbd_work *work) } } - rc = ksmbd_query_inode_status(d_inode(path.dentry->d_parent)); + rc = ksmbd_query_inode_status(path.dentry->d_parent); if (rc == KSMBD_INODE_STATUS_PENDING_DELETE) { rc = -EBUSY; goto err_out; diff --git a/fs/smb/server/vfs.c b/fs/smb/server/vfs.c index 533257b46fc1..9091dcd7a310 100644 --- a/fs/smb/server/vfs.c +++ b/fs/smb/server/vfs.c @@ -719,7 +719,7 @@ retry: goto out3; } - parent_fp = ksmbd_lookup_fd_inode(d_inode(old_child->d_parent)); + parent_fp = ksmbd_lookup_fd_inode(old_child->d_parent); if (parent_fp) { if (parent_fp->daccess & FILE_DELETE_LE) { pr_err("parent dir is opened with delete access\n"); diff --git a/fs/smb/server/vfs_cache.c b/fs/smb/server/vfs_cache.c index c91eac6514dd..ddf233994ddb 100644 --- a/fs/smb/server/vfs_cache.c +++ b/fs/smb/server/vfs_cache.c @@ -66,14 +66,14 @@ static unsigned long inode_hash(struct super_block *sb, unsigned long hashval) return tmp & inode_hash_mask; } -static struct ksmbd_inode *__ksmbd_inode_lookup(struct inode *inode) +static struct ksmbd_inode *__ksmbd_inode_lookup(struct dentry *de) { struct hlist_head *head = inode_hashtable + - inode_hash(inode->i_sb, inode->i_ino); + inode_hash(d_inode(de)->i_sb, (unsigned long)de); struct ksmbd_inode *ci = NULL, *ret_ci = NULL; hlist_for_each_entry(ci, head, m_hash) { - if (ci->m_inode == inode) { + if (ci->m_de == de) { if (atomic_inc_not_zero(&ci->m_count)) ret_ci = ci; break; @@ -84,26 +84,16 @@ static struct ksmbd_inode *__ksmbd_inode_lookup(struct inode *inode) static struct ksmbd_inode *ksmbd_inode_lookup(struct ksmbd_file *fp) { - return __ksmbd_inode_lookup(file_inode(fp->filp)); + return __ksmbd_inode_lookup(fp->filp->f_path.dentry); } -static struct ksmbd_inode *ksmbd_inode_lookup_by_vfsinode(struct inode *inode) -{ - struct ksmbd_inode *ci; - - read_lock(&inode_hash_lock); - ci = __ksmbd_inode_lookup(inode); - read_unlock(&inode_hash_lock); - return ci; -} - -int ksmbd_query_inode_status(struct inode *inode) +int ksmbd_query_inode_status(struct dentry *dentry) { struct ksmbd_inode *ci; int ret = KSMBD_INODE_STATUS_UNKNOWN; read_lock(&inode_hash_lock); - ci = __ksmbd_inode_lookup(inode); + ci = __ksmbd_inode_lookup(dentry); if (ci) { ret = KSMBD_INODE_STATUS_OK; if (ci->m_flags & (S_DEL_PENDING | S_DEL_ON_CLS)) @@ -143,7 +133,7 @@ void ksmbd_fd_set_delete_on_close(struct ksmbd_file *fp, static void ksmbd_inode_hash(struct ksmbd_inode *ci) { struct hlist_head *b = inode_hashtable + - inode_hash(ci->m_inode->i_sb, ci->m_inode->i_ino); + inode_hash(d_inode(ci->m_de)->i_sb, (unsigned long)ci->m_de); hlist_add_head(&ci->m_hash, b); } @@ -157,7 +147,6 @@ static void ksmbd_inode_unhash(struct ksmbd_inode *ci) static int ksmbd_inode_init(struct ksmbd_inode *ci, struct ksmbd_file *fp) { - ci->m_inode = file_inode(fp->filp); atomic_set(&ci->m_count, 1); atomic_set(&ci->op_count, 0); atomic_set(&ci->sop_count, 0); @@ -166,6 +155,7 @@ static int ksmbd_inode_init(struct ksmbd_inode *ci, struct ksmbd_file *fp) INIT_LIST_HEAD(&ci->m_fp_list); INIT_LIST_HEAD(&ci->m_op_list); rwlock_init(&ci->m_lock); + ci->m_de = fp->filp->f_path.dentry; return 0; } @@ -488,12 +478,15 @@ struct ksmbd_file *ksmbd_lookup_fd_cguid(char *cguid) return fp; } -struct ksmbd_file *ksmbd_lookup_fd_inode(struct inode *inode) +struct ksmbd_file *ksmbd_lookup_fd_inode(struct dentry *dentry) { struct ksmbd_file *lfp; struct ksmbd_inode *ci; + struct inode *inode = d_inode(dentry); - ci = ksmbd_inode_lookup_by_vfsinode(inode); + read_lock(&inode_hash_lock); + ci = __ksmbd_inode_lookup(dentry); + read_unlock(&inode_hash_lock); if (!ci) return NULL; diff --git a/fs/smb/server/vfs_cache.h b/fs/smb/server/vfs_cache.h index 03d0bf941216..8325cf4527c4 100644 --- a/fs/smb/server/vfs_cache.h +++ b/fs/smb/server/vfs_cache.h @@ -51,7 +51,7 @@ struct ksmbd_inode { atomic_t op_count; /* opinfo count for streams */ atomic_t sop_count; - struct inode *m_inode; + struct dentry *m_de; unsigned int m_flags; struct hlist_node m_hash; struct list_head m_fp_list; @@ -140,7 +140,7 @@ struct ksmbd_file *ksmbd_lookup_fd_slow(struct ksmbd_work *work, u64 id, void ksmbd_fd_put(struct ksmbd_work *work, struct ksmbd_file *fp); struct ksmbd_file *ksmbd_lookup_durable_fd(unsigned long long id); struct ksmbd_file *ksmbd_lookup_fd_cguid(char *cguid); -struct ksmbd_file *ksmbd_lookup_fd_inode(struct inode *inode); +struct ksmbd_file *ksmbd_lookup_fd_inode(struct dentry *dentry); unsigned int ksmbd_open_durable_fd(struct ksmbd_file *fp); struct ksmbd_file *ksmbd_open_fd(struct ksmbd_work *work, struct file *filp); void ksmbd_close_tree_conn_fds(struct ksmbd_work *work); @@ -164,7 +164,7 @@ enum KSMBD_INODE_STATUS { KSMBD_INODE_STATUS_PENDING_DELETE, }; -int ksmbd_query_inode_status(struct inode *inode); +int ksmbd_query_inode_status(struct dentry *dentry); bool ksmbd_inode_pending_delete(struct ksmbd_file *fp); void ksmbd_set_inode_pending_delete(struct ksmbd_file *fp); void ksmbd_clear_inode_pending_delete(struct ksmbd_file *fp); -- cgit v1.2.3 From 2e450920d58b4991a436c8cecf3484bcacd8e535 Mon Sep 17 00:00:00 2001 From: Namjae Jeon Date: Mon, 20 Nov 2023 23:39:39 +0900 Subject: ksmbd: move oplock handling after unlock parent dir ksmbd should process secound parallel smb2 create request during waiting oplock break ack. parent lock range that is too large in smb2_open() causes smb2_open() to be serialized. Move the oplock handling to the bottom of smb2_open() and make it called after parent unlock. This fixes the failure of smb2.lease.breaking1 testcase. Signed-off-by: Namjae Jeon Signed-off-by: Steve French --- fs/smb/server/smb2pdu.c | 121 ++++++++++++++++++++++++++---------------------- 1 file changed, 65 insertions(+), 56 deletions(-) diff --git a/fs/smb/server/smb2pdu.c b/fs/smb/server/smb2pdu.c index ac4204955a85..8cc01c3a763b 100644 --- a/fs/smb/server/smb2pdu.c +++ b/fs/smb/server/smb2pdu.c @@ -2691,7 +2691,7 @@ int smb2_open(struct ksmbd_work *work) *(char *)req->Buffer == '\\') { pr_err("not allow directory name included leading slash\n"); rc = -EINVAL; - goto err_out1; + goto err_out2; } name = smb2_get_name(req->Buffer, @@ -2702,7 +2702,7 @@ int smb2_open(struct ksmbd_work *work) if (rc != -ENOMEM) rc = -ENOENT; name = NULL; - goto err_out1; + goto err_out2; } ksmbd_debug(SMB, "converted name = %s\n", name); @@ -2710,28 +2710,28 @@ int smb2_open(struct ksmbd_work *work) if (!test_share_config_flag(work->tcon->share_conf, KSMBD_SHARE_FLAG_STREAMS)) { rc = -EBADF; - goto err_out1; + goto err_out2; } rc = parse_stream_name(name, &stream_name, &s_type); if (rc < 0) - goto err_out1; + goto err_out2; } rc = ksmbd_validate_filename(name); if (rc < 0) - goto err_out1; + goto err_out2; if (ksmbd_share_veto_filename(share, name)) { rc = -ENOENT; ksmbd_debug(SMB, "Reject open(), vetoed file: %s\n", name); - goto err_out1; + goto err_out2; } } else { name = kstrdup("", GFP_KERNEL); if (!name) { rc = -ENOMEM; - goto err_out1; + goto err_out2; } } @@ -2744,14 +2744,14 @@ int smb2_open(struct ksmbd_work *work) le32_to_cpu(req->ImpersonationLevel)); rc = -EIO; rsp->hdr.Status = STATUS_BAD_IMPERSONATION_LEVEL; - goto err_out1; + goto err_out2; } if (req->CreateOptions && !(req->CreateOptions & CREATE_OPTIONS_MASK_LE)) { pr_err("Invalid create options : 0x%x\n", le32_to_cpu(req->CreateOptions)); rc = -EINVAL; - goto err_out1; + goto err_out2; } else { if (req->CreateOptions & FILE_SEQUENTIAL_ONLY_LE && req->CreateOptions & FILE_RANDOM_ACCESS_LE) @@ -2761,13 +2761,13 @@ int smb2_open(struct ksmbd_work *work) (FILE_OPEN_BY_FILE_ID_LE | CREATE_TREE_CONNECTION | FILE_RESERVE_OPFILTER_LE)) { rc = -EOPNOTSUPP; - goto err_out1; + goto err_out2; } if (req->CreateOptions & FILE_DIRECTORY_FILE_LE) { if (req->CreateOptions & FILE_NON_DIRECTORY_FILE_LE) { rc = -EINVAL; - goto err_out1; + goto err_out2; } else if (req->CreateOptions & FILE_NO_COMPRESSION_LE) { req->CreateOptions = ~(FILE_NO_COMPRESSION_LE); } @@ -2779,21 +2779,21 @@ int smb2_open(struct ksmbd_work *work) pr_err("Invalid create disposition : 0x%x\n", le32_to_cpu(req->CreateDisposition)); rc = -EINVAL; - goto err_out1; + goto err_out2; } if (!(req->DesiredAccess & DESIRED_ACCESS_MASK)) { pr_err("Invalid desired access : 0x%x\n", le32_to_cpu(req->DesiredAccess)); rc = -EACCES; - goto err_out1; + goto err_out2; } if (req->FileAttributes && !(req->FileAttributes & FILE_ATTRIBUTE_MASK_LE)) { pr_err("Invalid file attribute : 0x%x\n", le32_to_cpu(req->FileAttributes)); rc = -EINVAL; - goto err_out1; + goto err_out2; } if (req->CreateContextsOffset) { @@ -2801,19 +2801,19 @@ int smb2_open(struct ksmbd_work *work) context = smb2_find_context_vals(req, SMB2_CREATE_EA_BUFFER, 4); if (IS_ERR(context)) { rc = PTR_ERR(context); - goto err_out1; + goto err_out2; } else if (context) { ea_buf = (struct create_ea_buf_req *)context; if (le16_to_cpu(context->DataOffset) + le32_to_cpu(context->DataLength) < sizeof(struct create_ea_buf_req)) { rc = -EINVAL; - goto err_out1; + goto err_out2; } if (req->CreateOptions & FILE_NO_EA_KNOWLEDGE_LE) { rsp->hdr.Status = STATUS_ACCESS_DENIED; rc = -EACCES; - goto err_out1; + goto err_out2; } } @@ -2821,7 +2821,7 @@ int smb2_open(struct ksmbd_work *work) SMB2_CREATE_QUERY_MAXIMAL_ACCESS_REQUEST, 4); if (IS_ERR(context)) { rc = PTR_ERR(context); - goto err_out1; + goto err_out2; } else if (context) { ksmbd_debug(SMB, "get query maximal access context\n"); @@ -2832,11 +2832,11 @@ int smb2_open(struct ksmbd_work *work) SMB2_CREATE_TIMEWARP_REQUEST, 4); if (IS_ERR(context)) { rc = PTR_ERR(context); - goto err_out1; + goto err_out2; } else if (context) { ksmbd_debug(SMB, "get timewarp context\n"); rc = -EBADF; - goto err_out1; + goto err_out2; } if (tcon->posix_extensions) { @@ -2844,7 +2844,7 @@ int smb2_open(struct ksmbd_work *work) SMB2_CREATE_TAG_POSIX, 16); if (IS_ERR(context)) { rc = PTR_ERR(context); - goto err_out1; + goto err_out2; } else if (context) { struct create_posix *posix = (struct create_posix *)context; @@ -2852,7 +2852,7 @@ int smb2_open(struct ksmbd_work *work) le32_to_cpu(context->DataLength) < sizeof(struct create_posix) - 4) { rc = -EINVAL; - goto err_out1; + goto err_out2; } ksmbd_debug(SMB, "get posix context\n"); @@ -2864,7 +2864,7 @@ int smb2_open(struct ksmbd_work *work) if (ksmbd_override_fsids(work)) { rc = -ENOMEM; - goto err_out1; + goto err_out2; } rc = ksmbd_vfs_kern_path_locked(work, name, LOOKUP_NO_SYMLINKS, @@ -3177,11 +3177,6 @@ int smb2_open(struct ksmbd_work *work) fp->attrib_only = !(req->DesiredAccess & ~(FILE_READ_ATTRIBUTES_LE | FILE_WRITE_ATTRIBUTES_LE | FILE_SYNCHRONIZE_LE)); - if (!S_ISDIR(file_inode(filp)->i_mode) && open_flags & O_TRUNC && - !fp->attrib_only && !stream_name) { - smb_break_all_oplock(work, fp); - need_truncate = 1; - } /* fp should be searchable through ksmbd_inode.m_fp_list * after daccess, saccess, attrib_only, and stream are @@ -3197,13 +3192,39 @@ int smb2_open(struct ksmbd_work *work) goto err_out; } + rc = ksmbd_vfs_getattr(&path, &stat); + if (rc) + goto err_out; + + if (stat.result_mask & STATX_BTIME) + fp->create_time = ksmbd_UnixTimeToNT(stat.btime); + else + fp->create_time = ksmbd_UnixTimeToNT(stat.ctime); + if (req->FileAttributes || fp->f_ci->m_fattr == 0) + fp->f_ci->m_fattr = + cpu_to_le32(smb2_get_dos_mode(&stat, le32_to_cpu(req->FileAttributes))); + + if (!created) + smb2_update_xattrs(tcon, &path, fp); + else + smb2_new_xattrs(tcon, &path, fp); + + if (file_present || created) + ksmbd_vfs_kern_path_unlock(&parent_path, &path); + + if (!S_ISDIR(file_inode(filp)->i_mode) && open_flags & O_TRUNC && + !fp->attrib_only && !stream_name) { + smb_break_all_oplock(work, fp); + need_truncate = 1; + } + share_ret = ksmbd_smb_check_shared_mode(fp->filp, fp); if (!test_share_config_flag(work->tcon->share_conf, KSMBD_SHARE_FLAG_OPLOCKS) || (req_op_level == SMB2_OPLOCK_LEVEL_LEASE && !(conn->vals->capabilities & SMB2_GLOBAL_CAP_LEASING))) { if (share_ret < 0 && !S_ISDIR(file_inode(fp->filp)->i_mode)) { rc = share_ret; - goto err_out; + goto err_out1; } } else { if (req_op_level == SMB2_OPLOCK_LEVEL_LEASE) { @@ -3213,7 +3234,7 @@ int smb2_open(struct ksmbd_work *work) name, req_op_level, lc->req_state); rc = find_same_lease_key(sess, fp->f_ci, lc); if (rc) - goto err_out; + goto err_out1; } else if (open_flags == O_RDONLY && (req_op_level == SMB2_OPLOCK_LEVEL_BATCH || req_op_level == SMB2_OPLOCK_LEVEL_EXCLUSIVE)) @@ -3224,12 +3245,18 @@ int smb2_open(struct ksmbd_work *work) le32_to_cpu(req->hdr.Id.SyncId.TreeId), lc, share_ret); if (rc < 0) - goto err_out; + goto err_out1; } if (req->CreateOptions & FILE_DELETE_ON_CLOSE_LE) ksmbd_fd_set_delete_on_close(fp, file_info); + if (need_truncate) { + rc = smb2_create_truncate(&fp->filp->f_path); + if (rc) + goto err_out1; + } + if (req->CreateContextsOffset) { struct create_alloc_size_req *az_req; @@ -3237,7 +3264,7 @@ int smb2_open(struct ksmbd_work *work) SMB2_CREATE_ALLOCATION_SIZE, 4); if (IS_ERR(az_req)) { rc = PTR_ERR(az_req); - goto err_out; + goto err_out1; } else if (az_req) { loff_t alloc_size; int err; @@ -3246,7 +3273,7 @@ int smb2_open(struct ksmbd_work *work) le32_to_cpu(az_req->ccontext.DataLength) < sizeof(struct create_alloc_size_req)) { rc = -EINVAL; - goto err_out; + goto err_out1; } alloc_size = le64_to_cpu(az_req->AllocationSize); ksmbd_debug(SMB, @@ -3264,30 +3291,13 @@ int smb2_open(struct ksmbd_work *work) context = smb2_find_context_vals(req, SMB2_CREATE_QUERY_ON_DISK_ID, 4); if (IS_ERR(context)) { rc = PTR_ERR(context); - goto err_out; + goto err_out1; } else if (context) { ksmbd_debug(SMB, "get query on disk id context\n"); query_disk_id = 1; } } - rc = ksmbd_vfs_getattr(&path, &stat); - if (rc) - goto err_out; - - if (stat.result_mask & STATX_BTIME) - fp->create_time = ksmbd_UnixTimeToNT(stat.btime); - else - fp->create_time = ksmbd_UnixTimeToNT(stat.ctime); - if (req->FileAttributes || fp->f_ci->m_fattr == 0) - fp->f_ci->m_fattr = - cpu_to_le32(smb2_get_dos_mode(&stat, le32_to_cpu(req->FileAttributes))); - - if (!created) - smb2_update_xattrs(tcon, &path, fp); - else - smb2_new_xattrs(tcon, &path, fp); - memcpy(fp->client_guid, conn->ClientGUID, SMB2_CLIENT_GUID_SIZE); rsp->StructureSize = cpu_to_le16(89); @@ -3394,14 +3404,13 @@ int smb2_open(struct ksmbd_work *work) } err_out: - if (file_present || created) + if (rc && (file_present || created)) ksmbd_vfs_kern_path_unlock(&parent_path, &path); - if (fp && need_truncate) - rc = smb2_create_truncate(&fp->filp->f_path); - - ksmbd_revert_fsids(work); err_out1: + ksmbd_revert_fsids(work); + +err_out2: if (!rc) { ksmbd_update_fstate(&work->sess->file_table, fp, FP_INITED); rc = ksmbd_iov_pin_rsp(work, (void *)rsp, iov_len); -- cgit v1.2.3 From 2a3f7857ec742e212d6cee7fbbf7b0e2ae7f5161 Mon Sep 17 00:00:00 2001 From: Namjae Jeon Date: Wed, 22 Nov 2023 23:00:22 +0900 Subject: ksmbd: release interim response after sending status pending response Add missing release async id and delete interim response entry after sending status pending response. This only cause when smb2 lease is enable. Signed-off-by: Namjae Jeon Signed-off-by: Steve French --- fs/smb/server/ksmbd_work.c | 3 +++ fs/smb/server/oplock.c | 3 ++- 2 files changed, 5 insertions(+), 1 deletion(-) diff --git a/fs/smb/server/ksmbd_work.c b/fs/smb/server/ksmbd_work.c index 2510b9f3c8c1..d7c676c151e2 100644 --- a/fs/smb/server/ksmbd_work.c +++ b/fs/smb/server/ksmbd_work.c @@ -56,6 +56,9 @@ void ksmbd_free_work_struct(struct ksmbd_work *work) kfree(work->tr_buf); kvfree(work->request_buf); kfree(work->iov); + if (!list_empty(&work->interim_entry)) + list_del(&work->interim_entry); + if (work->async_id) ksmbd_release_id(&work->conn->async_ida, work->async_id); kmem_cache_free(work_cache, work); diff --git a/fs/smb/server/oplock.c b/fs/smb/server/oplock.c index 9bc0103720f5..50c68beb71d6 100644 --- a/fs/smb/server/oplock.c +++ b/fs/smb/server/oplock.c @@ -833,7 +833,8 @@ static int smb2_lease_break_noti(struct oplock_info *opinfo) interim_entry); setup_async_work(in_work, NULL, NULL); smb2_send_interim_resp(in_work, STATUS_PENDING); - list_del(&in_work->interim_entry); + list_del_init(&in_work->interim_entry); + release_async_work(in_work); } INIT_WORK(&work->work, __smb2_lease_break_noti); ksmbd_queue_work(work); -- cgit v1.2.3 From 9ac45ac7cf65b0623ceeab9b28b307a08efa22dc Mon Sep 17 00:00:00 2001 From: Namjae Jeon Date: Wed, 22 Nov 2023 23:00:59 +0900 Subject: ksmbd: move setting SMB2_FLAGS_ASYNC_COMMAND and AsyncId Directly set SMB2_FLAGS_ASYNC_COMMAND flags and AsyncId in smb2 header of interim response instead of current response header. Signed-off-by: Namjae Jeon Signed-off-by: Steve French --- fs/smb/server/smb2pdu.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-) diff --git a/fs/smb/server/smb2pdu.c b/fs/smb/server/smb2pdu.c index 8cc01c3a763b..427dd2295f16 100644 --- a/fs/smb/server/smb2pdu.c +++ b/fs/smb/server/smb2pdu.c @@ -657,13 +657,9 @@ smb2_get_name(const char *src, const int maxlen, struct nls_table *local_nls) int setup_async_work(struct ksmbd_work *work, void (*fn)(void **), void **arg) { - struct smb2_hdr *rsp_hdr; struct ksmbd_conn *conn = work->conn; int id; - rsp_hdr = ksmbd_resp_buf_next(work); - rsp_hdr->Flags |= SMB2_FLAGS_ASYNC_COMMAND; - id = ksmbd_acquire_async_msg_id(&conn->async_ida); if (id < 0) { pr_err("Failed to alloc async message id\n"); @@ -671,7 +667,6 @@ int setup_async_work(struct ksmbd_work *work, void (*fn)(void **), void **arg) } work->asynchronous = true; work->async_id = id; - rsp_hdr->Id.AsyncId = cpu_to_le64(id); ksmbd_debug(SMB, "Send interim Response to inform async request id : %d\n", @@ -723,6 +718,8 @@ void smb2_send_interim_resp(struct ksmbd_work *work, __le32 status) __SMB2_HEADER_STRUCTURE_SIZE); rsp_hdr = smb2_get_msg(in_work->response_buf); + rsp_hdr->Flags |= SMB2_FLAGS_ASYNC_COMMAND; + rsp_hdr->Id.AsyncId = cpu_to_le64(work->async_id); smb2_set_err_rsp(in_work); rsp_hdr->Status = status; -- cgit v1.2.3 From cd80ce7e68f1624ac29cd0a6b057789d1236641e Mon Sep 17 00:00:00 2001 From: Namjae Jeon Date: Wed, 22 Nov 2023 23:01:43 +0900 Subject: ksmbd: don't update ->op_state as OPLOCK_STATE_NONE on error ksmbd set ->op_state as OPLOCK_STATE_NONE on lease break ack error. op_state of lease should not be updated because client can send lease break ack again. This patch fix smb2.lease.breaking2 test failure. Signed-off-by: Namjae Jeon Signed-off-by: Steve French --- fs/smb/server/smb2pdu.c | 1 - 1 file changed, 1 deletion(-) diff --git a/fs/smb/server/smb2pdu.c b/fs/smb/server/smb2pdu.c index 427dd2295f16..d369b98a6e10 100644 --- a/fs/smb/server/smb2pdu.c +++ b/fs/smb/server/smb2pdu.c @@ -8234,7 +8234,6 @@ static void smb21_lease_break_ack(struct ksmbd_work *work) return; err_out: - opinfo->op_state = OPLOCK_STATE_NONE; wake_up_interruptible_all(&opinfo->oplock_q); atomic_dec(&opinfo->breaking_cnt); wake_up_interruptible_all(&opinfo->oplock_brk); -- cgit v1.2.3 From d4e3b928ab487a8aecd1f6a140b40ac365116cfb Mon Sep 17 00:00:00 2001 From: Kent Overstreet Date: Fri, 17 Nov 2023 19:13:27 -0500 Subject: closures: CLOSURE_CALLBACK() to fix type punning Control flow integrity is now checking that type signatures match on indirect function calls. That breaks closures, which embed a work_struct in a closure in such a way that a closure_fn may also be used as a workqueue fn by the underlying closure code. So we have to change closure fns to take a work_struct as their argument - but that results in a loss of clarity, as closure fns have different semantics from normal workqueue functions (they run owning a ref on the closure, which must be released with continue_at() or closure_return()). Thus, this patc introduces CLOSURE_CALLBACK() and closure_type() macros as suggested by Kees, to smooth things over a bit. Suggested-by: Kees Cook Cc: Coly Li Signed-off-by: Kent Overstreet --- drivers/md/bcache/btree.c | 14 +++---- drivers/md/bcache/journal.c | 20 +++++----- drivers/md/bcache/movinggc.c | 16 ++++---- drivers/md/bcache/request.c | 74 ++++++++++++++++++------------------- drivers/md/bcache/request.h | 2 +- drivers/md/bcache/super.c | 40 ++++++++++---------- drivers/md/bcache/writeback.c | 16 ++++---- fs/bcachefs/btree_io.c | 7 ++-- fs/bcachefs/btree_update_interior.c | 4 +- fs/bcachefs/fs-io-direct.c | 8 ++-- fs/bcachefs/io_write.c | 14 +++---- fs/bcachefs/io_write.h | 3 +- fs/bcachefs/journal_io.c | 17 ++++----- fs/bcachefs/journal_io.h | 2 +- include/linux/closure.h | 9 ++++- lib/closure.c | 5 ++- 16 files changed, 127 insertions(+), 124 deletions(-) diff --git a/drivers/md/bcache/btree.c b/drivers/md/bcache/btree.c index ae5cbb55861f..9441eac3d546 100644 --- a/drivers/md/bcache/btree.c +++ b/drivers/md/bcache/btree.c @@ -293,16 +293,16 @@ static void btree_complete_write(struct btree *b, struct btree_write *w) w->journal = NULL; } -static void btree_node_write_unlock(struct closure *cl) +static CLOSURE_CALLBACK(btree_node_write_unlock) { - struct btree *b = container_of(cl, struct btree, io); + closure_type(b, struct btree, io); up(&b->io_mutex); } -static void __btree_node_write_done(struct closure *cl) +static CLOSURE_CALLBACK(__btree_node_write_done) { - struct btree *b = container_of(cl, struct btree, io); + closure_type(b, struct btree, io); struct btree_write *w = btree_prev_write(b); bch_bbio_free(b->bio, b->c); @@ -315,12 +315,12 @@ static void __btree_node_write_done(struct closure *cl) closure_return_with_destructor(cl, btree_node_write_unlock); } -static void btree_node_write_done(struct closure *cl) +static CLOSURE_CALLBACK(btree_node_write_done) { - struct btree *b = container_of(cl, struct btree, io); + closure_type(b, struct btree, io); bio_free_pages(b->bio); - __btree_node_write_done(cl); + __btree_node_write_done(&cl->work); } static void btree_node_write_endio(struct bio *bio) diff --git a/drivers/md/bcache/journal.c b/drivers/md/bcache/journal.c index c182c21de2e8..7ff14bd2feb8 100644 --- a/drivers/md/bcache/journal.c +++ b/drivers/md/bcache/journal.c @@ -723,11 +723,11 @@ static void journal_write_endio(struct bio *bio) closure_put(&w->c->journal.io); } -static void journal_write(struct closure *cl); +static CLOSURE_CALLBACK(journal_write); -static void journal_write_done(struct closure *cl) +static CLOSURE_CALLBACK(journal_write_done) { - struct journal *j = container_of(cl, struct journal, io); + closure_type(j, struct journal, io); struct journal_write *w = (j->cur == j->w) ? &j->w[1] : &j->w[0]; @@ -736,19 +736,19 @@ static void journal_write_done(struct closure *cl) continue_at_nobarrier(cl, journal_write, bch_journal_wq); } -static void journal_write_unlock(struct closure *cl) +static CLOSURE_CALLBACK(journal_write_unlock) __releases(&c->journal.lock) { - struct cache_set *c = container_of(cl, struct cache_set, journal.io); + closure_type(c, struct cache_set, journal.io); c->journal.io_in_flight = 0; spin_unlock(&c->journal.lock); } -static void journal_write_unlocked(struct closure *cl) +static CLOSURE_CALLBACK(journal_write_unlocked) __releases(c->journal.lock) { - struct cache_set *c = container_of(cl, struct cache_set, journal.io); + closure_type(c, struct cache_set, journal.io); struct cache *ca = c->cache; struct journal_write *w = c->journal.cur; struct bkey *k = &c->journal.key; @@ -823,12 +823,12 @@ static void journal_write_unlocked(struct closure *cl) continue_at(cl, journal_write_done, NULL); } -static void journal_write(struct closure *cl) +static CLOSURE_CALLBACK(journal_write) { - struct cache_set *c = container_of(cl, struct cache_set, journal.io); + closure_type(c, struct cache_set, journal.io); spin_lock(&c->journal.lock); - journal_write_unlocked(cl); + journal_write_unlocked(&cl->work); } static void journal_try_write(struct cache_set *c) diff --git a/drivers/md/bcache/movinggc.c b/drivers/md/bcache/movinggc.c index 9f32901fdad1..ebd500bdf0b2 100644 --- a/drivers/md/bcache/movinggc.c +++ b/drivers/md/bcache/movinggc.c @@ -35,16 +35,16 @@ static bool moving_pred(struct keybuf *buf, struct bkey *k) /* Moving GC - IO loop */ -static void moving_io_destructor(struct closure *cl) +static CLOSURE_CALLBACK(moving_io_destructor) { - struct moving_io *io = container_of(cl, struct moving_io, cl); + closure_type(io, struct moving_io, cl); kfree(io); } -static void write_moving_finish(struct closure *cl) +static CLOSURE_CALLBACK(write_moving_finish) { - struct moving_io *io = container_of(cl, struct moving_io, cl); + closure_type(io, struct moving_io, cl); struct bio *bio = &io->bio.bio; bio_free_pages(bio); @@ -89,9 +89,9 @@ static void moving_init(struct moving_io *io) bch_bio_map(bio, NULL); } -static void write_moving(struct closure *cl) +static CLOSURE_CALLBACK(write_moving) { - struct moving_io *io = container_of(cl, struct moving_io, cl); + closure_type(io, struct moving_io, cl); struct data_insert_op *op = &io->op; if (!op->status) { @@ -113,9 +113,9 @@ static void write_moving(struct closure *cl) continue_at(cl, write_moving_finish, op->wq); } -static void read_moving_submit(struct closure *cl) +static CLOSURE_CALLBACK(read_moving_submit) { - struct moving_io *io = container_of(cl, struct moving_io, cl); + closure_type(io, struct moving_io, cl); struct bio *bio = &io->bio.bio; bch_submit_bbio(bio, io->op.c, &io->w->key, 0); diff --git a/drivers/md/bcache/request.c b/drivers/md/bcache/request.c index a9b1f3896249..83d112bd2b1c 100644 --- a/drivers/md/bcache/request.c +++ b/drivers/md/bcache/request.c @@ -25,7 +25,7 @@ struct kmem_cache *bch_search_cache; -static void bch_data_insert_start(struct closure *cl); +static CLOSURE_CALLBACK(bch_data_insert_start); static unsigned int cache_mode(struct cached_dev *dc) { @@ -55,9 +55,9 @@ static void bio_csum(struct bio *bio, struct bkey *k) /* Insert data into cache */ -static void bch_data_insert_keys(struct closure *cl) +static CLOSURE_CALLBACK(bch_data_insert_keys) { - struct data_insert_op *op = container_of(cl, struct data_insert_op, cl); + closure_type(op, struct data_insert_op, cl); atomic_t *journal_ref = NULL; struct bkey *replace_key = op->replace ? &op->replace_key : NULL; int ret; @@ -136,9 +136,9 @@ out: continue_at(cl, bch_data_insert_keys, op->wq); } -static void bch_data_insert_error(struct closure *cl) +static CLOSURE_CALLBACK(bch_data_insert_error) { - struct data_insert_op *op = container_of(cl, struct data_insert_op, cl); + closure_type(op, struct data_insert_op, cl); /* * Our data write just errored, which means we've got a bunch of keys to @@ -163,7 +163,7 @@ static void bch_data_insert_error(struct closure *cl) op->insert_keys.top = dst; - bch_data_insert_keys(cl); + bch_data_insert_keys(&cl->work); } static void bch_data_insert_endio(struct bio *bio) @@ -184,9 +184,9 @@ static void bch_data_insert_endio(struct bio *bio) bch_bbio_endio(op->c, bio, bio->bi_status, "writing data to cache"); } -static void bch_data_insert_start(struct closure *cl) +static CLOSURE_CALLBACK(bch_data_insert_start) { - struct data_insert_op *op = container_of(cl, struct data_insert_op, cl); + closure_type(op, struct data_insert_op, cl); struct bio *bio = op->bio, *n; if (op->bypass) @@ -305,16 +305,16 @@ err: * If op->bypass is true, instead of inserting the data it invalidates the * region of the cache represented by op->bio and op->inode. */ -void bch_data_insert(struct closure *cl) +CLOSURE_CALLBACK(bch_data_insert) { - struct data_insert_op *op = container_of(cl, struct data_insert_op, cl); + closure_type(op, struct data_insert_op, cl); trace_bcache_write(op->c, op->inode, op->bio, op->writeback, op->bypass); bch_keylist_init(&op->insert_keys); bio_get(op->bio); - bch_data_insert_start(cl); + bch_data_insert_start(&cl->work); } /* @@ -575,9 +575,9 @@ static int cache_lookup_fn(struct btree_op *op, struct btree *b, struct bkey *k) return n == bio ? MAP_DONE : MAP_CONTINUE; } -static void cache_lookup(struct closure *cl) +static CLOSURE_CALLBACK(cache_lookup) { - struct search *s = container_of(cl, struct search, iop.cl); + closure_type(s, struct search, iop.cl); struct bio *bio = &s->bio.bio; struct cached_dev *dc; int ret; @@ -698,9 +698,9 @@ static void do_bio_hook(struct search *s, bio_cnt_set(bio, 3); } -static void search_free(struct closure *cl) +static CLOSURE_CALLBACK(search_free) { - struct search *s = container_of(cl, struct search, cl); + closure_type(s, struct search, cl); atomic_dec(&s->iop.c->search_inflight); @@ -749,20 +749,20 @@ static inline struct search *search_alloc(struct bio *bio, /* Cached devices */ -static void cached_dev_bio_complete(struct closure *cl) +static CLOSURE_CALLBACK(cached_dev_bio_complete) { - struct search *s = container_of(cl, struct search, cl); + closure_type(s, struct search, cl); struct cached_dev *dc = container_of(s->d, struct cached_dev, disk); cached_dev_put(dc); - search_free(cl); + search_free(&cl->work); } /* Process reads */ -static void cached_dev_read_error_done(struct closure *cl) +static CLOSURE_CALLBACK(cached_dev_read_error_done) { - struct search *s = container_of(cl, struct search, cl); + closure_type(s, struct search, cl); if (s->iop.replace_collision) bch_mark_cache_miss_collision(s->iop.c, s->d); @@ -770,12 +770,12 @@ static void cached_dev_read_error_done(struct closure *cl) if (s->iop.bio) bio_free_pages(s->iop.bio); - cached_dev_bio_complete(cl); + cached_dev_bio_complete(&cl->work); } -static void cached_dev_read_error(struct closure *cl) +static CLOSURE_CALLBACK(cached_dev_read_error) { - struct search *s = container_of(cl, struct search, cl); + closure_type(s, struct search, cl); struct bio *bio = &s->bio.bio; /* @@ -801,9 +801,9 @@ static void cached_dev_read_error(struct closure *cl) continue_at(cl, cached_dev_read_error_done, NULL); } -static void cached_dev_cache_miss_done(struct closure *cl) +static CLOSURE_CALLBACK(cached_dev_cache_miss_done) { - struct search *s = container_of(cl, struct search, cl); + closure_type(s, struct search, cl); struct bcache_device *d = s->d; if (s->iop.replace_collision) @@ -812,13 +812,13 @@ static void cached_dev_cache_miss_done(struct closure *cl) if (s->iop.bio) bio_free_pages(s->iop.bio); - cached_dev_bio_complete(cl); + cached_dev_bio_complete(&cl->work); closure_put(&d->cl); } -static void cached_dev_read_done(struct closure *cl) +static CLOSURE_CALLBACK(cached_dev_read_done) { - struct search *s = container_of(cl, struct search, cl); + closure_type(s, struct search, cl); struct cached_dev *dc = container_of(s->d, struct cached_dev, disk); /* @@ -858,9 +858,9 @@ static void cached_dev_read_done(struct closure *cl) continue_at(cl, cached_dev_cache_miss_done, NULL); } -static void cached_dev_read_done_bh(struct closure *cl) +static CLOSURE_CALLBACK(cached_dev_read_done_bh) { - struct search *s = container_of(cl, struct search, cl); + closure_type(s, struct search, cl); struct cached_dev *dc = container_of(s->d, struct cached_dev, disk); bch_mark_cache_accounting(s->iop.c, s->d, @@ -955,13 +955,13 @@ static void cached_dev_read(struct cached_dev *dc, struct search *s) /* Process writes */ -static void cached_dev_write_complete(struct closure *cl) +static CLOSURE_CALLBACK(cached_dev_write_complete) { - struct search *s = container_of(cl, struct search, cl); + closure_type(s, struct search, cl); struct cached_dev *dc = container_of(s->d, struct cached_dev, disk); up_read_non_owner(&dc->writeback_lock); - cached_dev_bio_complete(cl); + cached_dev_bio_complete(&cl->work); } static void cached_dev_write(struct cached_dev *dc, struct search *s) @@ -1048,9 +1048,9 @@ insert_data: continue_at(cl, cached_dev_write_complete, NULL); } -static void cached_dev_nodata(struct closure *cl) +static CLOSURE_CALLBACK(cached_dev_nodata) { - struct search *s = container_of(cl, struct search, cl); + closure_type(s, struct search, cl); struct bio *bio = &s->bio.bio; if (s->iop.flush_journal) @@ -1265,9 +1265,9 @@ static int flash_dev_cache_miss(struct btree *b, struct search *s, return MAP_CONTINUE; } -static void flash_dev_nodata(struct closure *cl) +static CLOSURE_CALLBACK(flash_dev_nodata) { - struct search *s = container_of(cl, struct search, cl); + closure_type(s, struct search, cl); if (s->iop.flush_journal) bch_journal_meta(s->iop.c, cl); diff --git a/drivers/md/bcache/request.h b/drivers/md/bcache/request.h index 38ab4856eaab..46bbef00aebb 100644 --- a/drivers/md/bcache/request.h +++ b/drivers/md/bcache/request.h @@ -34,7 +34,7 @@ struct data_insert_op { }; unsigned int bch_get_congested(const struct cache_set *c); -void bch_data_insert(struct closure *cl); +CLOSURE_CALLBACK(bch_data_insert); void bch_cached_dev_request_init(struct cached_dev *dc); void cached_dev_submit_bio(struct bio *bio); diff --git a/drivers/md/bcache/super.c b/drivers/md/bcache/super.c index 8bd899766372..e0db905c1ca0 100644 --- a/drivers/md/bcache/super.c +++ b/drivers/md/bcache/super.c @@ -327,9 +327,9 @@ static void __write_super(struct cache_sb *sb, struct cache_sb_disk *out, submit_bio(bio); } -static void bch_write_bdev_super_unlock(struct closure *cl) +static CLOSURE_CALLBACK(bch_write_bdev_super_unlock) { - struct cached_dev *dc = container_of(cl, struct cached_dev, sb_write); + closure_type(dc, struct cached_dev, sb_write); up(&dc->sb_write_mutex); } @@ -363,9 +363,9 @@ static void write_super_endio(struct bio *bio) closure_put(&ca->set->sb_write); } -static void bcache_write_super_unlock(struct closure *cl) +static CLOSURE_CALLBACK(bcache_write_super_unlock) { - struct cache_set *c = container_of(cl, struct cache_set, sb_write); + closure_type(c, struct cache_set, sb_write); up(&c->sb_write_mutex); } @@ -407,9 +407,9 @@ static void uuid_endio(struct bio *bio) closure_put(cl); } -static void uuid_io_unlock(struct closure *cl) +static CLOSURE_CALLBACK(uuid_io_unlock) { - struct cache_set *c = container_of(cl, struct cache_set, uuid_write); + closure_type(c, struct cache_set, uuid_write); up(&c->uuid_write_mutex); } @@ -1342,9 +1342,9 @@ void bch_cached_dev_release(struct kobject *kobj) module_put(THIS_MODULE); } -static void cached_dev_free(struct closure *cl) +static CLOSURE_CALLBACK(cached_dev_free) { - struct cached_dev *dc = container_of(cl, struct cached_dev, disk.cl); + closure_type(dc, struct cached_dev, disk.cl); if (test_and_clear_bit(BCACHE_DEV_WB_RUNNING, &dc->disk.flags)) cancel_writeback_rate_update_dwork(dc); @@ -1376,9 +1376,9 @@ static void cached_dev_free(struct closure *cl) kobject_put(&dc->disk.kobj); } -static void cached_dev_flush(struct closure *cl) +static CLOSURE_CALLBACK(cached_dev_flush) { - struct cached_dev *dc = container_of(cl, struct cached_dev, disk.cl); + closure_type(dc, struct cached_dev, disk.cl); struct bcache_device *d = &dc->disk; mutex_lock(&bch_register_lock); @@ -1497,9 +1497,9 @@ void bch_flash_dev_release(struct kobject *kobj) kfree(d); } -static void flash_dev_free(struct closure *cl) +static CLOSURE_CALLBACK(flash_dev_free) { - struct bcache_device *d = container_of(cl, struct bcache_device, cl); + closure_type(d, struct bcache_device, cl); mutex_lock(&bch_register_lock); atomic_long_sub(bcache_dev_sectors_dirty(d), @@ -1510,9 +1510,9 @@ static void flash_dev_free(struct closure *cl) kobject_put(&d->kobj); } -static void flash_dev_flush(struct closure *cl) +static CLOSURE_CALLBACK(flash_dev_flush) { - struct bcache_device *d = container_of(cl, struct bcache_device, cl); + closure_type(d, struct bcache_device, cl); mutex_lock(&bch_register_lock); bcache_device_unlink(d); @@ -1668,9 +1668,9 @@ void bch_cache_set_release(struct kobject *kobj) module_put(THIS_MODULE); } -static void cache_set_free(struct closure *cl) +static CLOSURE_CALLBACK(cache_set_free) { - struct cache_set *c = container_of(cl, struct cache_set, cl); + closure_type(c, struct cache_set, cl); struct cache *ca; debugfs_remove(c->debug); @@ -1709,9 +1709,9 @@ static void cache_set_free(struct closure *cl) kobject_put(&c->kobj); } -static void cache_set_flush(struct closure *cl) +static CLOSURE_CALLBACK(cache_set_flush) { - struct cache_set *c = container_of(cl, struct cache_set, caching); + closure_type(c, struct cache_set, caching); struct cache *ca = c->cache; struct btree *b; @@ -1806,9 +1806,9 @@ static void conditional_stop_bcache_device(struct cache_set *c, } } -static void __cache_set_unregister(struct closure *cl) +static CLOSURE_CALLBACK(__cache_set_unregister) { - struct cache_set *c = container_of(cl, struct cache_set, caching); + closure_type(c, struct cache_set, caching); struct cached_dev *dc; struct bcache_device *d; size_t i; diff --git a/drivers/md/bcache/writeback.c b/drivers/md/bcache/writeback.c index 24c049067f61..77427e355613 100644 --- a/drivers/md/bcache/writeback.c +++ b/drivers/md/bcache/writeback.c @@ -341,16 +341,16 @@ static void dirty_init(struct keybuf_key *w) bch_bio_map(bio, NULL); } -static void dirty_io_destructor(struct closure *cl) +static CLOSURE_CALLBACK(dirty_io_destructor) { - struct dirty_io *io = container_of(cl, struct dirty_io, cl); + closure_type(io, struct dirty_io, cl); kfree(io); } -static void write_dirty_finish(struct closure *cl) +static CLOSURE_CALLBACK(write_dirty_finish) { - struct dirty_io *io = container_of(cl, struct dirty_io, cl); + closure_type(io, struct dirty_io, cl); struct keybuf_key *w = io->bio.bi_private; struct cached_dev *dc = io->dc; @@ -400,9 +400,9 @@ static void dirty_endio(struct bio *bio) closure_put(&io->cl); } -static void write_dirty(struct closure *cl) +static CLOSURE_CALLBACK(write_dirty) { - struct dirty_io *io = container_of(cl, struct dirty_io, cl); + closure_type(io, struct dirty_io, cl); struct keybuf_key *w = io->bio.bi_private; struct cached_dev *dc = io->dc; @@ -462,9 +462,9 @@ static void read_dirty_endio(struct bio *bio) dirty_endio(bio); } -static void read_dirty_submit(struct closure *cl) +static CLOSURE_CALLBACK(read_dirty_submit) { - struct dirty_io *io = container_of(cl, struct dirty_io, cl); + closure_type(io, struct dirty_io, cl); closure_bio_submit(io->dc->disk.c, &io->bio, cl); diff --git a/fs/bcachefs/btree_io.c b/fs/bcachefs/btree_io.c index 37d896edb06e..57c20390e10e 100644 --- a/fs/bcachefs/btree_io.c +++ b/fs/bcachefs/btree_io.c @@ -1358,10 +1358,9 @@ static bool btree_node_has_extra_bsets(struct bch_fs *c, unsigned offset, void * return offset; } -static void btree_node_read_all_replicas_done(struct closure *cl) +static CLOSURE_CALLBACK(btree_node_read_all_replicas_done) { - struct btree_node_read_all *ra = - container_of(cl, struct btree_node_read_all, cl); + closure_type(ra, struct btree_node_read_all, cl); struct bch_fs *c = ra->c; struct btree *b = ra->b; struct printbuf buf = PRINTBUF; @@ -1567,7 +1566,7 @@ static int btree_node_read_all_replicas(struct bch_fs *c, struct btree *b, bool if (sync) { closure_sync(&ra->cl); - btree_node_read_all_replicas_done(&ra->cl); + btree_node_read_all_replicas_done(&ra->cl.work); } else { continue_at(&ra->cl, btree_node_read_all_replicas_done, c->io_complete_wq); diff --git a/fs/bcachefs/btree_update_interior.c b/fs/bcachefs/btree_update_interior.c index 76f27bc9fa24..d08efd6d958e 100644 --- a/fs/bcachefs/btree_update_interior.c +++ b/fs/bcachefs/btree_update_interior.c @@ -778,9 +778,9 @@ static void btree_interior_update_work(struct work_struct *work) } } -static void btree_update_set_nodes_written(struct closure *cl) +static CLOSURE_CALLBACK(btree_update_set_nodes_written) { - struct btree_update *as = container_of(cl, struct btree_update, cl); + closure_type(as, struct btree_update, cl); struct bch_fs *c = as->c; mutex_lock(&c->btree_interior_update_lock); diff --git a/fs/bcachefs/fs-io-direct.c b/fs/bcachefs/fs-io-direct.c index 5b42a76c4796..9a479e4de6b3 100644 --- a/fs/bcachefs/fs-io-direct.c +++ b/fs/bcachefs/fs-io-direct.c @@ -35,9 +35,9 @@ static void bio_check_or_release(struct bio *bio, bool check_dirty) } } -static void bch2_dio_read_complete(struct closure *cl) +static CLOSURE_CALLBACK(bch2_dio_read_complete) { - struct dio_read *dio = container_of(cl, struct dio_read, cl); + closure_type(dio, struct dio_read, cl); dio->req->ki_complete(dio->req, dio->ret); bio_check_or_release(&dio->rbio.bio, dio->should_dirty); @@ -325,9 +325,9 @@ static noinline int bch2_dio_write_copy_iov(struct dio_write *dio) return 0; } -static void bch2_dio_write_flush_done(struct closure *cl) +static CLOSURE_CALLBACK(bch2_dio_write_flush_done) { - struct dio_write *dio = container_of(cl, struct dio_write, op.cl); + closure_type(dio, struct dio_write, op.cl); struct bch_fs *c = dio->op.c; closure_debug_destroy(cl); diff --git a/fs/bcachefs/io_write.c b/fs/bcachefs/io_write.c index d704a8f829c8..8ede46b1e354 100644 --- a/fs/bcachefs/io_write.c +++ b/fs/bcachefs/io_write.c @@ -580,9 +580,9 @@ static inline void wp_update_state(struct write_point *wp, bool running) __wp_update_state(wp, state); } -static void bch2_write_index(struct closure *cl) +static CLOSURE_CALLBACK(bch2_write_index) { - struct bch_write_op *op = container_of(cl, struct bch_write_op, cl); + closure_type(op, struct bch_write_op, cl); struct write_point *wp = op->wp; struct workqueue_struct *wq = index_update_wq(op); unsigned long flags; @@ -1208,9 +1208,9 @@ static void __bch2_nocow_write_done(struct bch_write_op *op) bch2_nocow_write_convert_unwritten(op); } -static void bch2_nocow_write_done(struct closure *cl) +static CLOSURE_CALLBACK(bch2_nocow_write_done) { - struct bch_write_op *op = container_of(cl, struct bch_write_op, cl); + closure_type(op, struct bch_write_op, cl); __bch2_nocow_write_done(op); bch2_write_done(cl); @@ -1363,7 +1363,7 @@ err: op->insert_keys.top = op->insert_keys.keys; } else if (op->flags & BCH_WRITE_SYNC) { closure_sync(&op->cl); - bch2_nocow_write_done(&op->cl); + bch2_nocow_write_done(&op->cl.work); } else { /* * XXX @@ -1566,9 +1566,9 @@ err: * If op->discard is true, instead of inserting the data it invalidates the * region of the cache represented by op->bio and op->inode. */ -void bch2_write(struct closure *cl) +CLOSURE_CALLBACK(bch2_write) { - struct bch_write_op *op = container_of(cl, struct bch_write_op, cl); + closure_type(op, struct bch_write_op, cl); struct bio *bio = &op->wbio.bio; struct bch_fs *c = op->c; unsigned data_len; diff --git a/fs/bcachefs/io_write.h b/fs/bcachefs/io_write.h index 9323167229ee..6c276a48f95d 100644 --- a/fs/bcachefs/io_write.h +++ b/fs/bcachefs/io_write.h @@ -90,8 +90,7 @@ static inline void bch2_write_op_init(struct bch_write_op *op, struct bch_fs *c, op->devs_need_flush = NULL; } -void bch2_write(struct closure *); - +CLOSURE_CALLBACK(bch2_write); void bch2_write_point_do_index_updates(struct work_struct *); static inline struct bch_write_bio *wbio_init(struct bio *bio) diff --git a/fs/bcachefs/journal_io.c b/fs/bcachefs/journal_io.c index 786a09285509..02e6484f9953 100644 --- a/fs/bcachefs/journal_io.c +++ b/fs/bcachefs/journal_io.c @@ -1025,10 +1025,9 @@ next_block: return 0; } -static void bch2_journal_read_device(struct closure *cl) +static CLOSURE_CALLBACK(bch2_journal_read_device) { - struct journal_device *ja = - container_of(cl, struct journal_device, read); + closure_type(ja, struct journal_device, read); struct bch_dev *ca = container_of(ja, struct bch_dev, journal); struct bch_fs *c = ca->fs; struct journal_list *jlist = @@ -1520,9 +1519,9 @@ static inline struct journal_buf *journal_last_unwritten_buf(struct journal *j) return j->buf + (journal_last_unwritten_seq(j) & JOURNAL_BUF_MASK); } -static void journal_write_done(struct closure *cl) +static CLOSURE_CALLBACK(journal_write_done) { - struct journal *j = container_of(cl, struct journal, io); + closure_type(j, struct journal, io); struct bch_fs *c = container_of(j, struct bch_fs, journal); struct journal_buf *w = journal_last_unwritten_buf(j); struct bch_replicas_padded replicas; @@ -1638,9 +1637,9 @@ static void journal_write_endio(struct bio *bio) percpu_ref_put(&ca->io_ref); } -static void do_journal_write(struct closure *cl) +static CLOSURE_CALLBACK(do_journal_write) { - struct journal *j = container_of(cl, struct journal, io); + closure_type(j, struct journal, io); struct bch_fs *c = container_of(j, struct bch_fs, journal); struct bch_dev *ca; struct journal_buf *w = journal_last_unwritten_buf(j); @@ -1850,9 +1849,9 @@ static int bch2_journal_write_pick_flush(struct journal *j, struct journal_buf * return 0; } -void bch2_journal_write(struct closure *cl) +CLOSURE_CALLBACK(bch2_journal_write) { - struct journal *j = container_of(cl, struct journal, io); + closure_type(j, struct journal, io); struct bch_fs *c = container_of(j, struct bch_fs, journal); struct bch_dev *ca; struct journal_buf *w = journal_last_unwritten_buf(j); diff --git a/fs/bcachefs/journal_io.h b/fs/bcachefs/journal_io.h index a88d097b13f1..c035e7c108e1 100644 --- a/fs/bcachefs/journal_io.h +++ b/fs/bcachefs/journal_io.h @@ -60,6 +60,6 @@ void bch2_journal_ptrs_to_text(struct printbuf *, struct bch_fs *, int bch2_journal_read(struct bch_fs *, u64 *, u64 *, u64 *); -void bch2_journal_write(struct closure *); +CLOSURE_CALLBACK(bch2_journal_write); #endif /* _BCACHEFS_JOURNAL_IO_H */ diff --git a/include/linux/closure.h b/include/linux/closure.h index de7bb47d8a46..c554c6a08768 100644 --- a/include/linux/closure.h +++ b/include/linux/closure.h @@ -104,7 +104,7 @@ struct closure; struct closure_syncer; -typedef void (closure_fn) (struct closure *); +typedef void (closure_fn) (struct work_struct *); extern struct dentry *bcache_debug; struct closure_waitlist { @@ -254,7 +254,7 @@ static inline void closure_queue(struct closure *cl) INIT_WORK(&cl->work, cl->work.func); BUG_ON(!queue_work(wq, &cl->work)); } else - cl->fn(cl); + cl->fn(&cl->work); } /** @@ -309,6 +309,11 @@ static inline void closure_wake_up(struct closure_waitlist *list) __closure_wake_up(list); } +#define CLOSURE_CALLBACK(name) void name(struct work_struct *ws) +#define closure_type(name, type, member) \ + struct closure *cl = container_of(ws, struct closure, work); \ + type *name = container_of(cl, type, member) + /** * continue_at - jump to another function with barrier * diff --git a/lib/closure.c b/lib/closure.c index f86c9eeafb35..c16540552d61 100644 --- a/lib/closure.c +++ b/lib/closure.c @@ -36,7 +36,7 @@ static inline void closure_put_after_sub(struct closure *cl, int flags) closure_debug_destroy(cl); if (destructor) - destructor(cl); + destructor(&cl->work); if (parent) closure_put(parent); @@ -108,8 +108,9 @@ struct closure_syncer { int done; }; -static void closure_sync_fn(struct closure *cl) +static CLOSURE_CALLBACK(closure_sync_fn) { + struct closure *cl = container_of(ws, struct closure, work); struct closure_syncer *s = cl->s; struct task_struct *p; -- cgit v1.2.3 From 6201d91ee32cf92e9bcca69a3cf73461827b5ce5 Mon Sep 17 00:00:00 2001 From: Kent Overstreet Date: Thu, 23 Nov 2023 17:56:14 -0500 Subject: bcachefs: Put erasure coding behind an EXPERIMENTAL kconfig option We still have disk space accounting changes coming for erasure coding, and the changes won't be as strictly backwards compatible as they'd ought to be - specifically, we need to start accounting striped data under a separate counter in bch_alloc (which describes buckets). A fsck will suffice for upgrading/downgrading, but since erasure coding is the most incomplete major feature of bcachefs it still makes sense to put behind a separate kconfig option, so that users are fully aware. Signed-off-by: Kent Overstreet --- fs/bcachefs/Kconfig | 12 ++++++++++++ fs/bcachefs/alloc_foreground.c | 3 +++ 2 files changed, 15 insertions(+) diff --git a/fs/bcachefs/Kconfig b/fs/bcachefs/Kconfig index c08c2c7d6fbb..fddc7be58022 100644 --- a/fs/bcachefs/Kconfig +++ b/fs/bcachefs/Kconfig @@ -33,6 +33,18 @@ config BCACHEFS_QUOTA depends on BCACHEFS_FS select QUOTACTL +config BCACHEFS_ERASURE_CODING + bool "bcachefs erasure coding (RAID5/6) support (EXPERIMENTAL)" + depends on BCACHEFS_FS + select QUOTACTL + help + This enables the "erasure_code" filesysystem and inode option, which + organizes data into reed-solomon stripes instead of ordinary + replication. + + WARNING: this feature is still undergoing on disk format changes, and + should only be enabled for testing purposes. + config BCACHEFS_POSIX_ACL bool "bcachefs POSIX ACL support" depends on BCACHEFS_FS diff --git a/fs/bcachefs/alloc_foreground.c b/fs/bcachefs/alloc_foreground.c index b85c7765272f..5042858719c0 100644 --- a/fs/bcachefs/alloc_foreground.c +++ b/fs/bcachefs/alloc_foreground.c @@ -1321,6 +1321,9 @@ int bch2_alloc_sectors_start_trans(struct btree_trans *trans, int ret; int i; + if (!IS_ENABLED(CONFIG_BCACHEFS_ERASURE_CODING)) + erasure_code = false; + BUG_ON(flags & BCH_WRITE_ONLY_SPECIFIED_DEVS); BUG_ON(!nr_replicas || !nr_replicas_required); -- cgit v1.2.3 From 50e029c6390a6795869b742a5fce1e57d6a76c82 Mon Sep 17 00:00:00 2001 From: Kent Overstreet Date: Mon, 20 Nov 2023 17:24:32 -0500 Subject: bcachefs: bch2_moving_ctxt_flush_all() Introduce a new helper to flush all move IOs, and use it in a few places where we should have been. The new helper also drops btree locks before waiting on outstanding move writes, avoiding potential deadlocks. Signed-off-by: Kent Overstreet --- fs/bcachefs/move.c | 16 +++++++++++----- 1 file changed, 11 insertions(+), 5 deletions(-) diff --git a/fs/bcachefs/move.c b/fs/bcachefs/move.c index ab749bf2fcbc..7819ed8d9df9 100644 --- a/fs/bcachefs/move.c +++ b/fs/bcachefs/move.c @@ -163,12 +163,18 @@ void bch2_move_ctxt_wait_for_io(struct moving_context *ctxt) atomic_read(&ctxt->write_sectors) != sectors_pending); } +static void bch2_moving_ctxt_flush_all(struct moving_context *ctxt) +{ + move_ctxt_wait_event(ctxt, list_empty(&ctxt->reads)); + bch2_trans_unlock_long(ctxt->trans); + closure_sync(&ctxt->cl); +} + void bch2_moving_ctxt_exit(struct moving_context *ctxt) { struct bch_fs *c = ctxt->trans->c; - move_ctxt_wait_event(ctxt, list_empty(&ctxt->reads)); - closure_sync(&ctxt->cl); + bch2_moving_ctxt_flush_all(ctxt); EBUG_ON(atomic_read(&ctxt->write_sectors)); EBUG_ON(atomic_read(&ctxt->write_ios)); @@ -484,8 +490,8 @@ int bch2_move_ratelimit(struct moving_context *ctxt) struct bch_fs *c = ctxt->trans->c; u64 delay; - if (ctxt->wait_on_copygc && !c->copygc_running) { - bch2_trans_unlock_long(ctxt->trans); + if (ctxt->wait_on_copygc && c->copygc_running) { + bch2_moving_ctxt_flush_all(ctxt); wait_event_killable(c->copygc_running_wq, !c->copygc_running || kthread_should_stop()); @@ -512,7 +518,7 @@ int bch2_move_ratelimit(struct moving_context *ctxt) schedule_timeout(delay); if (unlikely(freezing(current))) { - move_ctxt_wait_event(ctxt, list_empty(&ctxt->reads)); + bch2_moving_ctxt_flush_all(ctxt); try_to_freeze(); } } while (delay); -- cgit v1.2.3 From 261af2f1c6b668586325a37df02f904c1c273a7d Mon Sep 17 00:00:00 2001 From: Kent Overstreet Date: Wed, 22 Nov 2023 23:44:47 -0500 Subject: bcachefs: Make sure bch2_move_ratelimit() also waits for move_ops This adds move_ctxt_wait_event_timeout(), which can sleep for a timeout while also issueing pending moves as reads complete. Co-developed-by: Daniel Hill Signed-off-by: Kent Overstreet --- fs/bcachefs/move.c | 17 ++++------------- fs/bcachefs/move.h | 19 +++++++++++++++++++ 2 files changed, 23 insertions(+), 13 deletions(-) diff --git a/fs/bcachefs/move.c b/fs/bcachefs/move.c index 7819ed8d9df9..71f865352816 100644 --- a/fs/bcachefs/move.c +++ b/fs/bcachefs/move.c @@ -500,22 +500,13 @@ int bch2_move_ratelimit(struct moving_context *ctxt) do { delay = ctxt->rate ? bch2_ratelimit_delay(ctxt->rate) : 0; - - if (delay) { - if (delay > HZ / 10) - bch2_trans_unlock_long(ctxt->trans); - else - bch2_trans_unlock(ctxt->trans); - set_current_state(TASK_INTERRUPTIBLE); - } - - if ((current->flags & PF_KTHREAD) && kthread_should_stop()) { - __set_current_state(TASK_RUNNING); + if ((current->flags & PF_KTHREAD) && kthread_should_stop()) return 1; - } if (delay) - schedule_timeout(delay); + move_ctxt_wait_event_timeout(ctxt, + freezing(current) || kthread_should_stop(), + delay); if (unlikely(freezing(current))) { bch2_moving_ctxt_flush_all(ctxt); diff --git a/fs/bcachefs/move.h b/fs/bcachefs/move.h index 07cf9d42643b..0906aa2d1de2 100644 --- a/fs/bcachefs/move.h +++ b/fs/bcachefs/move.h @@ -38,6 +38,25 @@ struct moving_context { wait_queue_head_t wait; }; +#define move_ctxt_wait_event_timeout(_ctxt, _cond, _timeout) \ +({ \ + int _ret = 0; \ + while (true) { \ + bool cond_finished = false; \ + bch2_moving_ctxt_do_pending_writes(_ctxt); \ + \ + if (_cond) \ + break; \ + bch2_trans_unlock_long((_ctxt)->trans); \ + _ret = __wait_event_timeout((_ctxt)->wait, \ + bch2_moving_ctxt_next_pending_write(_ctxt) || \ + (cond_finished = (_cond)), _timeout); \ + if (_ret || ( cond_finished)) \ + break; \ + } \ + _ret; \ +}) + #define move_ctxt_wait_event(_ctxt, _cond) \ do { \ bool cond_finished = false; \ -- cgit v1.2.3 From 202a7c292ec65d5a602aa356f4fa4f50ff84cdee Mon Sep 17 00:00:00 2001 From: Kent Overstreet Date: Fri, 24 Nov 2023 00:54:43 -0500 Subject: bcachefs: Don't stop copygc thread on device resize copygc no longer has to scan the buckets, so it's no longer a problem if the number of buckets is changing while it's running. This also fixes a bug where we forgot to restart copygc. Signed-off-by: Kent Overstreet --- fs/bcachefs/buckets.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/fs/bcachefs/buckets.c b/fs/bcachefs/buckets.c index 58d8c6ffd955..61e4cc09ad83 100644 --- a/fs/bcachefs/buckets.c +++ b/fs/bcachefs/buckets.c @@ -2091,8 +2091,6 @@ int bch2_dev_buckets_resize(struct bch_fs *c, struct bch_dev *ca, u64 nbuckets) bucket_gens->first_bucket = ca->mi.first_bucket; bucket_gens->nbuckets = nbuckets; - bch2_copygc_stop(c); - if (resize) { down_write(&c->gc_lock); down_write(&ca->bucket_lock); -- cgit v1.2.3 From 468035ca4b83fd49be99a67b5aac3960d577c7c5 Mon Sep 17 00:00:00 2001 From: Kent Overstreet Date: Fri, 24 Nov 2023 00:55:59 -0500 Subject: bcachefs: Start gc, copygc, rebalance threads after initing writes ref This fixes a bug where copygc would occasionally race with going read-write and die, thinking we were read only, because it couldn't take a ref on c->writes. It's not necessary for copygc (or rebalance, or copygc) to take write refs; they could run with BCH_TRANS_COMMIT_nocheck_rw, but this is an easier fix that making sure that flag is passed correctly everywhere. Signed-off-by: Kent Overstreet --- fs/bcachefs/super.c | 28 ++++++++++++++++------------ 1 file changed, 16 insertions(+), 12 deletions(-) diff --git a/fs/bcachefs/super.c b/fs/bcachefs/super.c index 24672bb31cbe..14f4eff421cf 100644 --- a/fs/bcachefs/super.c +++ b/fs/bcachefs/super.c @@ -423,6 +423,18 @@ static int __bch2_fs_read_write(struct bch_fs *c, bool early) bch2_dev_allocator_add(c, ca); bch2_recalc_capacity(c); + set_bit(BCH_FS_RW, &c->flags); + set_bit(BCH_FS_WAS_RW, &c->flags); + +#ifndef BCH_WRITE_REF_DEBUG + percpu_ref_reinit(&c->writes); +#else + for (i = 0; i < BCH_WRITE_REF_NR; i++) { + BUG_ON(atomic_long_read(&c->writes[i])); + atomic_long_inc(&c->writes[i]); + } +#endif + ret = bch2_gc_thread_start(c); if (ret) { bch_err(c, "error starting gc thread"); @@ -439,24 +451,16 @@ static int __bch2_fs_read_write(struct bch_fs *c, bool early) goto err; } -#ifndef BCH_WRITE_REF_DEBUG - percpu_ref_reinit(&c->writes); -#else - for (i = 0; i < BCH_WRITE_REF_NR; i++) { - BUG_ON(atomic_long_read(&c->writes[i])); - atomic_long_inc(&c->writes[i]); - } -#endif - set_bit(BCH_FS_RW, &c->flags); - set_bit(BCH_FS_WAS_RW, &c->flags); - bch2_do_discards(c); bch2_do_invalidates(c); bch2_do_stripe_deletes(c); bch2_do_pending_node_rewrites(c); return 0; err: - __bch2_fs_read_only(c); + if (test_bit(BCH_FS_RW, &c->flags)) + bch2_fs_read_only(c); + else + __bch2_fs_read_only(c); return ret; } -- cgit v1.2.3 From 0a11adfb7aceb65831ff1c4d129d611e54fc3f57 Mon Sep 17 00:00:00 2001 From: Kent Overstreet Date: Sat, 11 Nov 2023 16:31:20 -0500 Subject: bcachefs: Fix an endianness conversion cpu_to_le32(), not le32_to_cpu() - fixes a sparse complaint. Signed-off-by: Kent Overstreet --- fs/bcachefs/snapshot.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/bcachefs/snapshot.c b/fs/bcachefs/snapshot.c index e9af77b384c7..5dac038f0851 100644 --- a/fs/bcachefs/snapshot.c +++ b/fs/bcachefs/snapshot.c @@ -959,7 +959,7 @@ static int bch2_snapshot_node_delete(struct btree_trans *trans, u32 id) parent_id, id)) goto err; - parent->v.children[i] = le32_to_cpu(child_id); + parent->v.children[i] = cpu_to_le32(child_id); normalize_snapshot_child_pointers(&parent->v); } -- cgit v1.2.3 From 63807d951803e422cea8bfb4fdd36f57de191ada Mon Sep 17 00:00:00 2001 From: Brian Foster Date: Thu, 16 Nov 2023 12:13:43 -0500 Subject: bcachefs: preserve device path as device name Various userspace scripts/tools may expect mount entries in /proc/mounts to reflect the device path names used to mount the associated filesystem. bcachefs seems to normalize the device path to the underlying device name based on the block device. This confuses tools like fstests when the test devices might be lvm or device-mapper based. The default behavior for show_vfsmnt() appers to be to use the string passed to alloc_vfsmnt(), so tweak bcachefs to copy the path at device superblock read time and to display it via ->show_devname(). Signed-off-by: Brian Foster Signed-off-by: Kent Overstreet --- fs/bcachefs/fs.c | 3 +-- fs/bcachefs/super-io.c | 5 +++++ fs/bcachefs/super_types.h | 1 + 3 files changed, 7 insertions(+), 2 deletions(-) diff --git a/fs/bcachefs/fs.c b/fs/bcachefs/fs.c index 8ef817304e4a..4d51be813509 100644 --- a/fs/bcachefs/fs.c +++ b/fs/bcachefs/fs.c @@ -1667,8 +1667,7 @@ static int bch2_show_devname(struct seq_file *seq, struct dentry *root) if (!first) seq_putc(seq, ':'); first = false; - seq_puts(seq, "/dev/"); - seq_puts(seq, ca->name); + seq_puts(seq, ca->disk_sb.sb_name); } return 0; diff --git a/fs/bcachefs/super-io.c b/fs/bcachefs/super-io.c index f4cad903f4d6..f3e12f7979d5 100644 --- a/fs/bcachefs/super-io.c +++ b/fs/bcachefs/super-io.c @@ -166,6 +166,7 @@ void bch2_free_super(struct bch_sb_handle *sb) if (!IS_ERR_OR_NULL(sb->bdev)) blkdev_put(sb->bdev, sb->holder); kfree(sb->holder); + kfree(sb->sb_name); kfree(sb->sb); memset(sb, 0, sizeof(*sb)); @@ -675,6 +676,10 @@ retry: if (!sb->holder) return -ENOMEM; + sb->sb_name = kstrdup(path, GFP_KERNEL); + if (!sb->sb_name) + return -ENOMEM; + #ifndef __KERNEL__ if (opt_get(*opts, direct_io) == false) sb->mode |= BLK_OPEN_BUFFERED; diff --git a/fs/bcachefs/super_types.h b/fs/bcachefs/super_types.h index 7dda4985b99f..9c1fd4ca2b10 100644 --- a/fs/bcachefs/super_types.h +++ b/fs/bcachefs/super_types.h @@ -5,6 +5,7 @@ struct bch_sb_handle { struct bch_sb *sb; struct block_device *bdev; + char *sb_name; struct bio *bio; void *holder; size_t buffer_size; -- cgit v1.2.3 From 8a443d3ea1327fea5ac3be77d2e39ebe35bfe9cf Mon Sep 17 00:00:00 2001 From: Kent Overstreet Date: Fri, 17 Nov 2023 23:13:49 -0500 Subject: bcachefs: Proper refcounting for journal_keys The btree iterator code overlays keys from the journal until journal replay is finished; since we're now starting copygc/rebalance etc. before replay is finished, this is multithreaded access and thus needs refcounting. Signed-off-by: Kent Overstreet --- fs/bcachefs/bcachefs.h | 2 ++ fs/bcachefs/btree_iter.c | 6 +++++- fs/bcachefs/btree_journal_iter.c | 18 +++++++++++++++--- fs/bcachefs/btree_journal_iter.h | 10 +++++++++- fs/bcachefs/recovery.c | 11 +++++++---- fs/bcachefs/super.c | 6 ++++-- 6 files changed, 42 insertions(+), 11 deletions(-) diff --git a/fs/bcachefs/bcachefs.h b/fs/bcachefs/bcachefs.h index 403aa3389fcc..e9d753b04a90 100644 --- a/fs/bcachefs/bcachefs.h +++ b/fs/bcachefs/bcachefs.h @@ -638,6 +638,8 @@ struct journal_keys { size_t gap; size_t nr; size_t size; + atomic_t ref; + bool initial_ref_held; }; struct btree_trans_buf { diff --git a/fs/bcachefs/btree_iter.c b/fs/bcachefs/btree_iter.c index 6fa90bcd7016..8e0fe65f6101 100644 --- a/fs/bcachefs/btree_iter.c +++ b/fs/bcachefs/btree_iter.c @@ -2981,7 +2981,8 @@ struct btree_trans *__bch2_trans_get(struct bch_fs *c, unsigned fn_idx) trans->fn_idx = fn_idx; trans->locking_wait.task = current; trans->journal_replay_not_finished = - !test_bit(JOURNAL_REPLAY_DONE, &c->journal.flags); + unlikely(!test_bit(JOURNAL_REPLAY_DONE, &c->journal.flags)) && + atomic_inc_not_zero(&c->journal_keys.ref); closure_init_stack(&trans->ref); s = btree_trans_stats(trans); @@ -3098,6 +3099,9 @@ void bch2_trans_put(struct btree_trans *trans) kfree(trans->fs_usage_deltas); } + if (unlikely(trans->journal_replay_not_finished)) + bch2_journal_keys_put(c); + if (trans->mem_bytes == BTREE_TRANS_MEM_MAX) mempool_free(trans->mem, &c->btree_trans_mem_pool); else diff --git a/fs/bcachefs/btree_journal_iter.c b/fs/bcachefs/btree_journal_iter.c index 58a981bcf3aa..ec52f50d249d 100644 --- a/fs/bcachefs/btree_journal_iter.c +++ b/fs/bcachefs/btree_journal_iter.c @@ -80,6 +80,8 @@ struct bkey_i *bch2_journal_keys_peek_upto(struct bch_fs *c, enum btree_id btree struct journal_keys *keys = &c->journal_keys; unsigned iters = 0; struct journal_key *k; + + BUG_ON(*idx > keys->nr); search: if (!*idx) *idx = __bch2_journal_key_search(keys, btree_id, level, pos); @@ -189,10 +191,12 @@ int bch2_journal_key_insert_take(struct bch_fs *c, enum btree_id id, /* Since @keys was full, there was no gap: */ memcpy(new_keys.d, keys->d, sizeof(keys->d[0]) * keys->nr); kvfree(keys->d); - *keys = new_keys; + keys->d = new_keys.d; + keys->nr = new_keys.nr; + keys->size = new_keys.size; /* And now the gap is at the end: */ - keys->gap = keys->nr; + keys->gap = keys->nr; } journal_iters_move_gap(c, keys->gap, idx); @@ -415,10 +419,16 @@ static int journal_sort_key_cmp(const void *_l, const void *_r) cmp_int(l->journal_offset, r->journal_offset); } -void bch2_journal_keys_free(struct journal_keys *keys) +void bch2_journal_keys_put(struct bch_fs *c) { + struct journal_keys *keys = &c->journal_keys; struct journal_key *i; + BUG_ON(atomic_read(&keys->ref) <= 0); + + if (!atomic_dec_and_test(&keys->ref)) + return; + move_gap(keys->d, keys->nr, keys->size, keys->gap, keys->nr); keys->gap = keys->nr; @@ -429,6 +439,8 @@ void bch2_journal_keys_free(struct journal_keys *keys) kvfree(keys->d); keys->d = NULL; keys->nr = keys->gap = keys->size = 0; + + bch2_journal_entries_free(c); } static void __journal_keys_sort(struct journal_keys *keys) diff --git a/fs/bcachefs/btree_journal_iter.h b/fs/bcachefs/btree_journal_iter.h index 5d64e7e22f26..8ca4c100b2e3 100644 --- a/fs/bcachefs/btree_journal_iter.h +++ b/fs/bcachefs/btree_journal_iter.h @@ -49,7 +49,15 @@ void bch2_btree_and_journal_iter_init_node_iter(struct btree_and_journal_iter *, struct bch_fs *, struct btree *); -void bch2_journal_keys_free(struct journal_keys *); +void bch2_journal_keys_put(struct bch_fs *); + +static inline void bch2_journal_keys_put_initial(struct bch_fs *c) +{ + if (c->journal_keys.initial_ref_held) + bch2_journal_keys_put(c); + c->journal_keys.initial_ref_held = false; +} + void bch2_journal_entries_free(struct bch_fs *); int bch2_journal_keys_sort(struct bch_fs *); diff --git a/fs/bcachefs/recovery.c b/fs/bcachefs/recovery.c index 9c30500ce920..770ced1c6285 100644 --- a/fs/bcachefs/recovery.c +++ b/fs/bcachefs/recovery.c @@ -167,6 +167,8 @@ static int bch2_journal_replay(struct bch_fs *c) goto err; } + BUG_ON(!atomic_read(&keys->ref)); + for (i = 0; i < keys->nr; i++) { k = keys_sorted[i]; @@ -188,6 +190,9 @@ static int bch2_journal_replay(struct bch_fs *c) } } + if (!c->opts.keep_journal) + bch2_journal_keys_put_initial(c); + replay_now_at(j, j->replay_journal_seq_end); j->replay_journal_seq = 0; @@ -909,10 +914,8 @@ out: bch2_flush_fsck_errs(c); if (!c->opts.keep_journal && - test_bit(JOURNAL_REPLAY_DONE, &c->journal.flags)) { - bch2_journal_keys_free(&c->journal_keys); - bch2_journal_entries_free(c); - } + test_bit(JOURNAL_REPLAY_DONE, &c->journal.flags)) + bch2_journal_keys_put_initial(c); kfree(clean); if (!ret && test_bit(BCH_FS_NEED_DELETE_DEAD_SNAPSHOTS, &c->flags)) { diff --git a/fs/bcachefs/super.c b/fs/bcachefs/super.c index 14f4eff421cf..f63474c5c5a2 100644 --- a/fs/bcachefs/super.c +++ b/fs/bcachefs/super.c @@ -508,8 +508,8 @@ static void __bch2_fs_free(struct bch_fs *c) bch2_io_clock_exit(&c->io_clock[WRITE]); bch2_io_clock_exit(&c->io_clock[READ]); bch2_fs_compress_exit(c); - bch2_journal_keys_free(&c->journal_keys); - bch2_journal_entries_free(c); + bch2_journal_keys_put_initial(c); + BUG_ON(atomic_read(&c->journal_keys.ref)); bch2_fs_btree_write_buffer_exit(c); percpu_free_rwsem(&c->mark_lock); free_percpu(c->online_reserved); @@ -706,6 +706,8 @@ static struct bch_fs *bch2_fs_alloc(struct bch_sb *sb, struct bch_opts opts) init_rwsem(&c->gc_lock); mutex_init(&c->gc_gens_lock); + atomic_set(&c->journal_keys.ref, 1); + c->journal_keys.initial_ref_held = true; for (i = 0; i < BCH_TIME_STAT_NR; i++) bch2_time_stats_init(&c->times[i]); -- cgit v1.2.3 From 0af8a06a4ce823e380385cdd9538cdd968a1ffae Mon Sep 17 00:00:00 2001 From: Kent Overstreet Date: Mon, 20 Nov 2023 18:23:26 -0500 Subject: bcachefs: deallocate_extra_replicas() When allocating from devices with different durability, we might end up with more replicas than required; this changes bch2_alloc_sectors_start() to check for this, and drop replicas that aren't needed to hit the number of replicas requested. Signed-off-by: Kent Overstreet --- fs/bcachefs/alloc_foreground.c | 27 +++++++++++++++++++++++++++ 1 file changed, 27 insertions(+) diff --git a/fs/bcachefs/alloc_foreground.c b/fs/bcachefs/alloc_foreground.c index 5042858719c0..1ba0eeb7552a 100644 --- a/fs/bcachefs/alloc_foreground.c +++ b/fs/bcachefs/alloc_foreground.c @@ -1297,6 +1297,30 @@ out: return wp; } +static noinline void +deallocate_extra_replicas(struct bch_fs *c, + struct open_buckets *ptrs, + struct open_buckets *ptrs_no_use, + unsigned extra_replicas) +{ + struct open_buckets ptrs2 = { 0 }; + struct open_bucket *ob; + unsigned i; + + open_bucket_for_each(c, ptrs, ob, i) { + unsigned d = bch_dev_bkey_exists(c, ob->dev)->mi.durability; + + if (d && d <= extra_replicas) { + extra_replicas -= d; + ob_push(c, ptrs_no_use, ob); + } else { + ob_push(c, &ptrs2, ob); + } + } + + *ptrs = ptrs2; +} + /* * Get us an open_bucket we can allocate from, return with it locked: */ @@ -1385,6 +1409,9 @@ alloc_done: if (ret) goto err; + if (nr_effective > nr_replicas) + deallocate_extra_replicas(c, &ptrs, &wp->ptrs, nr_effective - nr_replicas); + /* Free buckets we didn't use: */ open_bucket_for_each(c, &wp->ptrs, ob, i) open_bucket_free_unused(c, ob); -- cgit v1.2.3 From be37542afbfcd27b3bb99a135abf9b4736b96f75 Mon Sep 17 00:00:00 2001 From: Jai Luthra Date: Thu, 23 Nov 2023 14:57:31 +0530 Subject: dmaengine: ti: k3-psil-am62a: Fix SPI PDMA data AM62Ax has 3 SPI channels where each channel has 4x TX and 4x RX threads. Also fix the thread numbers to match what the firmware expects according to the PSI-L device description. Link: http://downloads.ti.com/tisci/esd/latest/5_soc_doc/am62ax/psil_cfg.html [1] Fixes: aac6db7e243a ("dmaengine: ti: k3-psil-am62a: Add AM62Ax PSIL and PDMA data") Signed-off-by: Jai Luthra Link: https://lore.kernel.org/r/20231123-psil_fix-v1-1-6604d80819be@ti.com Signed-off-by: Vinod Koul --- drivers/dma/ti/k3-psil-am62a.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/dma/ti/k3-psil-am62a.c b/drivers/dma/ti/k3-psil-am62a.c index ca9d71f91422..4cf9123b0e93 100644 --- a/drivers/dma/ti/k3-psil-am62a.c +++ b/drivers/dma/ti/k3-psil-am62a.c @@ -84,7 +84,9 @@ static struct psil_ep am62a_src_ep_map[] = { PSIL_SAUL(0x7505, 21, 35, 8, 36, 0), PSIL_SAUL(0x7506, 22, 43, 8, 43, 0), PSIL_SAUL(0x7507, 23, 43, 8, 44, 0), - /* PDMA_MAIN0 - SPI0-3 */ + /* PDMA_MAIN0 - SPI0-2 */ + PSIL_PDMA_XY_PKT(0x4300), + PSIL_PDMA_XY_PKT(0x4301), PSIL_PDMA_XY_PKT(0x4302), PSIL_PDMA_XY_PKT(0x4303), PSIL_PDMA_XY_PKT(0x4304), @@ -95,8 +97,6 @@ static struct psil_ep am62a_src_ep_map[] = { PSIL_PDMA_XY_PKT(0x4309), PSIL_PDMA_XY_PKT(0x430a), PSIL_PDMA_XY_PKT(0x430b), - PSIL_PDMA_XY_PKT(0x430c), - PSIL_PDMA_XY_PKT(0x430d), /* PDMA_MAIN1 - UART0-6 */ PSIL_PDMA_XY_PKT(0x4400), PSIL_PDMA_XY_PKT(0x4401), @@ -151,7 +151,9 @@ static struct psil_ep am62a_dst_ep_map[] = { /* SAUL */ PSIL_SAUL(0xf500, 27, 83, 8, 83, 1), PSIL_SAUL(0xf501, 28, 91, 8, 91, 1), - /* PDMA_MAIN0 - SPI0-3 */ + /* PDMA_MAIN0 - SPI0-2 */ + PSIL_PDMA_XY_PKT(0xc300), + PSIL_PDMA_XY_PKT(0xc301), PSIL_PDMA_XY_PKT(0xc302), PSIL_PDMA_XY_PKT(0xc303), PSIL_PDMA_XY_PKT(0xc304), @@ -162,8 +164,6 @@ static struct psil_ep am62a_dst_ep_map[] = { PSIL_PDMA_XY_PKT(0xc309), PSIL_PDMA_XY_PKT(0xc30a), PSIL_PDMA_XY_PKT(0xc30b), - PSIL_PDMA_XY_PKT(0xc30c), - PSIL_PDMA_XY_PKT(0xc30d), /* PDMA_MAIN1 - UART0-6 */ PSIL_PDMA_XY_PKT(0xc400), PSIL_PDMA_XY_PKT(0xc401), -- cgit v1.2.3 From 38a285d5d446ce80b21f997cdc747cc11678b4e0 Mon Sep 17 00:00:00 2001 From: Tzuyi Chang Date: Tue, 21 Nov 2023 17:11:07 +0800 Subject: pinctrl: realtek: Fix logical error when finding descriptor The pin descriptor should be returned if the name has been found in the descriptor table. Remove the negation in the if statement for accurate retrieval. Fixes: e99ce78030db ("pinctrl: realtek: Add common pinctrl driver for Realtek DHC RTD SoCs") Signed-off-by: Tzuyi Chang Link: https://lore.kernel.org/r/20231121091107.5564-1-tychang@realtek.com Signed-off-by: Linus Walleij --- drivers/pinctrl/realtek/pinctrl-rtd.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/pinctrl/realtek/pinctrl-rtd.c b/drivers/pinctrl/realtek/pinctrl-rtd.c index 9c7a1af4ba69..208896593b61 100644 --- a/drivers/pinctrl/realtek/pinctrl-rtd.c +++ b/drivers/pinctrl/realtek/pinctrl-rtd.c @@ -146,7 +146,7 @@ static int rtd_pinctrl_get_function_groups(struct pinctrl_dev *pcdev, static const struct rtd_pin_desc *rtd_pinctrl_find_mux(struct rtd_pinctrl *data, unsigned int pin) { - if (!data->info->muxes[pin].name) + if (data->info->muxes[pin].name) return &data->info->muxes[pin]; return NULL; @@ -249,7 +249,7 @@ static const struct pinctrl_pin_desc static const struct rtd_pin_config_desc *rtd_pinctrl_find_config(struct rtd_pinctrl *data, unsigned int pin) { - if (!data->info->configs[pin].name) + if (data->info->configs[pin].name) return &data->info->configs[pin]; return NULL; -- cgit v1.2.3 From bca4104b00fec60be330cd32818dd5c70db3d469 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Tue, 21 Nov 2023 12:41:26 +0100 Subject: lockdep: Fix block chain corruption Kent reported an occasional KASAN splat in lockdep. Mark then noted: > I suspect the dodgy access is to chain_block_buckets[-1], which hits the last 4 > bytes of the redzone and gets (incorrectly/misleadingly) attributed to > nr_large_chain_blocks. That would mean @size == 0, at which point size_to_bucket() returns -1 and the above happens. alloc_chain_hlocks() has 'size - req', for the first with the precondition 'size >= rq', which allows the 0. This code is trying to split a block, del_chain_block() takes what we need, and add_chain_block() puts back the remainder, except in the above case the remainder is 0 sized and things go sideways. Fixes: 810507fe6fd5 ("locking/lockdep: Reuse freed chain_hlocks entries") Reported-by: Kent Overstreet Signed-off-by: Peter Zijlstra (Intel) Tested-by: Kent Overstreet Link: https://lkml.kernel.org/r/20231121114126.GH8262@noisy.programming.kicks-ass.net --- kernel/locking/lockdep.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/kernel/locking/lockdep.c b/kernel/locking/lockdep.c index e85b5ad3e206..151bd3de5936 100644 --- a/kernel/locking/lockdep.c +++ b/kernel/locking/lockdep.c @@ -3497,7 +3497,8 @@ static int alloc_chain_hlocks(int req) size = chain_block_size(curr); if (likely(size >= req)) { del_chain_block(0, size, chain_block_next(curr)); - add_chain_block(curr + req, size - req); + if (size > req) + add_chain_block(curr + req, size - req); return curr; } } -- cgit v1.2.3 From 90785ea8158b6923c5d6a024f2b1c076110577b5 Mon Sep 17 00:00:00 2001 From: Chester Lin Date: Thu, 16 Nov 2023 08:19:13 +0800 Subject: dt-bindings: pinctrl: s32g2: change a maintainer email address I am leaving SUSE so the current email address will be disabled soon. will be my new address for handling emails, patches and pull requests from upstream and communities. Cc: Chester Lin Cc: NXP S32 Linux Team Cc: Ghennadi Procopciuc Cc: Linus Walleij Cc: Rob Herring Cc: Krzysztof Kozlowski Cc: Conor Dooley Signed-off-by: Chester Lin Acked-by: Conor Dooley Link: https://lore.kernel.org/r/20231116001913.16121-1-clin@suse.com Signed-off-by: Linus Walleij --- Documentation/devicetree/bindings/pinctrl/nxp,s32g2-siul2-pinctrl.yaml | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/pinctrl/nxp,s32g2-siul2-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/nxp,s32g2-siul2-pinctrl.yaml index d49aafd8c5f4..a24286e4def6 100644 --- a/Documentation/devicetree/bindings/pinctrl/nxp,s32g2-siul2-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/nxp,s32g2-siul2-pinctrl.yaml @@ -9,7 +9,7 @@ title: NXP S32G2 pin controller maintainers: - Ghennadi Procopciuc - - Chester Lin + - Chester Lin description: | S32G2 pinmux is implemented in SIUL2 (System Integration Unit Lite2), -- cgit v1.2.3 From 2838a897654c4810153cc51646414ffa54fd23b0 Mon Sep 17 00:00:00 2001 From: Xiaolei Wang Date: Tue, 14 Nov 2023 06:57:12 +0800 Subject: dmaengine: fsl-edma: Do not suspend and resume the masked dma channel when the system is sleeping Some channels may be masked. When the system is suspended, if these masked channels are not filtered out, this will lead to null pointer operations and system crash: Unable to handle kernel NULL pointer dereference at virtual address Mem abort info: ESR = 0x0000000096000004 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x04: level 0 translation fault Data abort info: ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 CM = 0, WnR = 0, TnD = 0, TagAccess = 0 GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 user pgtable: 4k pages, 48-bit VAs, pgdp=0000000894300000 [00000000000002a0] pgd=0000000000000000, p4d=0000000000000000 Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP Modules linked in: CPU: 1 PID: 989 Comm: sh Tainted: G B 6.6.0-16203-g557fb7a3ec4c-dirty #70 Hardware name: Freescale i.MX8QM MEK (DT) pstate: 400000c5 (nZcv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc: fsl_edma_disable_request+0x3c/0x78 lr: fsl_edma_disable_request+0x3c/0x78 sp:ffff800089ae7690 x29: ffff800089ae7690 x28: ffff000807ab5440 x27: ffff000807ab5830 x26: 0000000000000008 x25: 0000000000000278 x24: 0000000000000001 23: ffff000807ab4328 x22: 0000000000000000 x21: 0000000000000009 x20: ffff800082616940 x19: 0000000000000000 x18: 0000000000000000 x17: 3d3d3d3d3d3d3d3d x16: 3d3d3d3d3d3d3d3d x15: 3d3d3d3d3d3d3d3d x14: 3d3d3d3d3d3d3d3d x13: 3d3d3d3d3d3d3d3d x12: 1ffff00010d45724 x11: ffff700010d45724 x10: dfff800000000000 x9: dfff800000000000 x8: 00008fffef2ba8dc x7: 0000000000000001 x6: ffff800086a2b927 x5: ffff800086a2b920 x4: ffff700010d45725 x3: ffff8000800d5bbc x2 : 0000000000000000 x1 : ffff000800c1d880 x0 : 0000000000000001 Call trace: fsl_edma_disable_request+0x3c/0x78 fsl_edma_suspend_late+0x128/0x12c dpm_run_callback+0xd4/0x304 __device_suspend_late+0xd0/0x240 dpm_suspend_late+0x174/0x59c suspend_devices_and_enter+0x194/0xd00 pm_suspend+0x3c4/0x910 Fixes: 72f5801a4e2b ("dmaengine: fsl-edma: integrate v3 support") Signed-off-by: Xiaolei Wang Link: https://lore.kernel.org/r/20231113225713.1892643-2-xiaolei.wang@windriver.com Signed-off-by: Vinod Koul --- drivers/dma/fsl-edma-main.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/dma/fsl-edma-main.c b/drivers/dma/fsl-edma-main.c index 4635e16d7705..52577fffc62b 100644 --- a/drivers/dma/fsl-edma-main.c +++ b/drivers/dma/fsl-edma-main.c @@ -631,6 +631,8 @@ static int fsl_edma_suspend_late(struct device *dev) for (i = 0; i < fsl_edma->n_chans; i++) { fsl_chan = &fsl_edma->chans[i]; + if (fsl_edma->chan_masked & BIT(i)) + continue; spin_lock_irqsave(&fsl_chan->vchan.lock, flags); /* Make sure chan is idle or will force disable. */ if (unlikely(!fsl_chan->idle)) { @@ -655,6 +657,8 @@ static int fsl_edma_resume_early(struct device *dev) for (i = 0; i < fsl_edma->n_chans; i++) { fsl_chan = &fsl_edma->chans[i]; + if (fsl_edma->chan_masked & BIT(i)) + continue; fsl_chan->pm_state = RUNNING; edma_write_tcdreg(fsl_chan, 0, csr); if (fsl_chan->slave_id != 0) -- cgit v1.2.3 From 3448397a47c08c291c3fccb7ac5f0f429fd547e0 Mon Sep 17 00:00:00 2001 From: Xiaolei Wang Date: Tue, 14 Nov 2023 06:57:13 +0800 Subject: dmaengine: fsl-edma: Add judgment on enabling round robin arbitration Add judgment on enabling round robin arbitration to avoid exceptions if this function is not supported. Call trace: fsl_edma_resume_early+0x1d4/0x208 dpm_run_callback+0xd4/0x304 device_resume_early+0xb0/0x208 dpm_resume_early+0x224/0x528 suspend_devices_and_enter+0x3e4/0xd00 pm_suspend+0x3c4/0x910 state_store+0x90/0x124 kobj_attr_store+0x48/0x64 sysfs_kf_write+0x84/0xb4 kernfs_fop_write_iter+0x19c/0x264 vfs_write+0x664/0x858 ksys_write+0xc8/0x180 __arm64_sys_write+0x44/0x58 invoke_syscall+0x5c/0x178 el0_svc_common.constprop.0+0x11c/0x14c do_el0_svc+0x30/0x40 el0_svc+0x58/0xa8 el0t_64_sync_handler+0xc0/0xc4 el0t_64_sync+0x190/0x194 Fixes: 72f5801a4e2b ("dmaengine: fsl-edma: integrate v3 support") Signed-off-by: Xiaolei Wang Reviewed-by: Frank Li Link: https://lore.kernel.org/r/20231113225713.1892643-3-xiaolei.wang@windriver.com Signed-off-by: Vinod Koul --- drivers/dma/fsl-edma-main.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/dma/fsl-edma-main.c b/drivers/dma/fsl-edma-main.c index 52577fffc62b..aea7a703dda7 100644 --- a/drivers/dma/fsl-edma-main.c +++ b/drivers/dma/fsl-edma-main.c @@ -665,7 +665,8 @@ static int fsl_edma_resume_early(struct device *dev) fsl_edma_chan_mux(fsl_chan, fsl_chan->slave_id, true); } - edma_writel(fsl_edma, EDMA_CR_ERGA | EDMA_CR_ERCA, regs->cr); + if (!(fsl_edma->drvdata->flags & FSL_EDMA_DRV_SPLIT_REG)) + edma_writel(fsl_edma, EDMA_CR_ERGA | EDMA_CR_ERCA, regs->cr); return 0; } -- cgit v1.2.3 From 3d1dc8b1030df8ca0fdfd4905c88ee10db943bf8 Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Fri, 24 Nov 2023 14:40:15 +0200 Subject: ASoC: Intel: skl_hda_dsp_generic: Drop HDMI routes when HDMI is not available When the HDMI is not present due to disabled display support we will use dummy codec and the HDMI routes will refer to non existent DAPM widgets. Trim the route list from the HDMI routes to be able to probe the card even if the HDMI dais are not registered. Signed-off-by: Peter Ujfalusi Reviewed-by: Bard Liao Reviewed-by: Kai Vehmanen Reviewed-by: Pierre-Louis Bossart Link: https://lore.kernel.org/r/20231124124015.15878-1-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown --- sound/soc/intel/boards/skl_hda_dsp_generic.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/sound/soc/intel/boards/skl_hda_dsp_generic.c b/sound/soc/intel/boards/skl_hda_dsp_generic.c index 6c6ef63cd5d9..6e172719c979 100644 --- a/sound/soc/intel/boards/skl_hda_dsp_generic.c +++ b/sound/soc/intel/boards/skl_hda_dsp_generic.c @@ -154,6 +154,8 @@ static int skl_hda_fill_card_info(struct snd_soc_acpi_mach_params *mach_params) card->dapm_widgets = skl_hda_widgets; card->num_dapm_widgets = ARRAY_SIZE(skl_hda_widgets); if (!ctx->idisp_codec) { + card->dapm_routes = &skl_hda_map[IDISP_ROUTE_COUNT]; + num_route -= IDISP_ROUTE_COUNT; for (i = 0; i < IDISP_DAI_COUNT; i++) { skl_hda_be_dai_links[i].codecs = &snd_soc_dummy_dlc; skl_hda_be_dai_links[i].num_codecs = 1; -- cgit v1.2.3 From fba293488ccb1902e715da328e71aa868dd561f6 Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Fri, 24 Nov 2023 14:40:32 +0200 Subject: ASoC: Intel: sof_sdw: Always register the HDMI dai links The topology files for SDW devices require HDMI dai links to be present and this is granted under normal conditions but in case of special use cases the display (i915) driver might not be enabled due to deny-listing, booting with nomodeset or just not compiled at all. This should not block the non HDMI audio to be usable so register the dai links unconditionally. The code has been prepared for this and in case of no HDMI audio the link is created with dummy codec. Closes: https://github.com/thesofproject/linux/issues/4594 Closes: https://github.com/thesofproject/linux/issues/4648 Signed-off-by: Peter Ujfalusi Reviewed-by: Kai Vehmanen Reviewed-by: Pierre-Louis Bossart Link: https://lore.kernel.org/r/20231124124032.15946-1-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown --- sound/soc/intel/boards/sof_sdw.c | 17 +++++++++-------- 1 file changed, 9 insertions(+), 8 deletions(-) diff --git a/sound/soc/intel/boards/sof_sdw.c b/sound/soc/intel/boards/sof_sdw.c index 3312ad8a563b..4e4284729773 100644 --- a/sound/soc/intel/boards/sof_sdw.c +++ b/sound/soc/intel/boards/sof_sdw.c @@ -1546,7 +1546,7 @@ static int sof_card_dai_links_create(struct snd_soc_card *card) { struct device *dev = card->dev; struct snd_soc_acpi_mach *mach = dev_get_platdata(card->dev); - int sdw_be_num = 0, ssp_num = 0, dmic_num = 0, hdmi_num = 0, bt_num = 0; + int sdw_be_num = 0, ssp_num = 0, dmic_num = 0, bt_num = 0; struct mc_private *ctx = snd_soc_card_get_drvdata(card); struct snd_soc_acpi_mach_params *mach_params = &mach->mach_params; const struct snd_soc_acpi_link_adr *adr_link = mach_params->links; @@ -1564,6 +1564,7 @@ static int sof_card_dai_links_create(struct snd_soc_card *card) char *codec_name, *codec_dai_name; int i, j, be_id = 0; int codec_index; + int hdmi_num; int ret; ret = get_dailink_info(dev, adr_link, &sdw_be_num, &codec_conf_num); @@ -1584,14 +1585,13 @@ static int sof_card_dai_links_create(struct snd_soc_card *card) ssp_num = hweight_long(ssp_mask); } - if (mach_params->codec_mask & IDISP_CODEC_MASK) { + if (mach_params->codec_mask & IDISP_CODEC_MASK) ctx->hdmi.idisp_codec = true; - if (sof_sdw_quirk & SOF_SDW_TGL_HDMI) - hdmi_num = SOF_TGL_HDMI_COUNT; - else - hdmi_num = SOF_PRE_TGL_HDMI_COUNT; - } + if (sof_sdw_quirk & SOF_SDW_TGL_HDMI) + hdmi_num = SOF_TGL_HDMI_COUNT; + else + hdmi_num = SOF_PRE_TGL_HDMI_COUNT; /* enable dmic01 & dmic16k */ if (sof_sdw_quirk & SOF_SDW_PCH_DMIC || mach_params->dmic_num) @@ -1601,7 +1601,8 @@ static int sof_card_dai_links_create(struct snd_soc_card *card) bt_num = 1; dev_dbg(dev, "sdw %d, ssp %d, dmic %d, hdmi %d, bt: %d\n", - sdw_be_num, ssp_num, dmic_num, hdmi_num, bt_num); + sdw_be_num, ssp_num, dmic_num, + ctx->hdmi.idisp_codec ? hdmi_num : 0, bt_num); /* allocate BE dailinks */ num_links = sdw_be_num + ssp_num + dmic_num + hdmi_num + bt_num; -- cgit v1.2.3 From 54bed6bafa0f38daf9697af50e3aff5ff1354fe1 Mon Sep 17 00:00:00 2001 From: Amelie Delaunay Date: Mon, 6 Nov 2023 14:48:32 +0100 Subject: dmaengine: stm32-dma: avoid bitfield overflow assertion stm32_dma_get_burst() returns a negative error for invalid input, which gets turned into a large u32 value in stm32_dma_prep_dma_memcpy() that in turn triggers an assertion because it does not fit into a two-bit field: drivers/dma/stm32-dma.c: In function 'stm32_dma_prep_dma_memcpy': include/linux/compiler_types.h:354:38: error: call to '__compiletime_assert_282' declared with attribute error: FIELD_PREP: value too large for the field _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__) ^ include/linux/compiler_types.h:335:4: note: in definition of macro '__compiletime_assert' prefix ## suffix(); \ ^~~~~~ include/linux/compiler_types.h:354:2: note: in expansion of macro '_compiletime_assert' _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__) ^~~~~~~~~~~~~~~~~~~ include/linux/build_bug.h:39:37: note: in expansion of macro 'compiletime_assert' #define BUILD_BUG_ON_MSG(cond, msg) compiletime_assert(!(cond), msg) ^~~~~~~~~~~~~~~~~~ include/linux/bitfield.h:68:3: note: in expansion of macro 'BUILD_BUG_ON_MSG' BUILD_BUG_ON_MSG(__builtin_constant_p(_val) ? \ ^~~~~~~~~~~~~~~~ include/linux/bitfield.h:114:3: note: in expansion of macro '__BF_FIELD_CHECK' __BF_FIELD_CHECK(_mask, 0ULL, _val, "FIELD_PREP: "); \ ^~~~~~~~~~~~~~~~ drivers/dma/stm32-dma.c:1237:4: note: in expansion of macro 'FIELD_PREP' FIELD_PREP(STM32_DMA_SCR_PBURST_MASK, dma_burst) | ^~~~~~~~~~ As an easy workaround, assume the error can happen, so try to handle this by failing stm32_dma_prep_dma_memcpy() before the assertion. It replicates what is done in stm32_dma_set_xfer_param() where stm32_dma_get_burst() is also used. Fixes: 1c32d6c37cc2 ("dmaengine: stm32-dma: use bitfield helpers") Fixes: a2b6103b7a8a ("dmaengine: stm32-dma: Improve memory burst management") Signed-off-by: Arnd Bergmann Signed-off-by: Amelie Delaunay Cc: stable@vger.kernel.org Reported-by: kernel test robot Closes: https://lore.kernel.org/oe-kbuild-all/202311060135.Q9eMnpCL-lkp@intel.com/ Link: https://lore.kernel.org/r/20231106134832.1470305-1-amelie.delaunay@foss.st.com Signed-off-by: Vinod Koul --- drivers/dma/stm32-dma.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/drivers/dma/stm32-dma.c b/drivers/dma/stm32-dma.c index 72d83cd9ed6b..90857d08a1a7 100644 --- a/drivers/dma/stm32-dma.c +++ b/drivers/dma/stm32-dma.c @@ -1246,8 +1246,8 @@ static struct dma_async_tx_descriptor *stm32_dma_prep_dma_memcpy( enum dma_slave_buswidth max_width; struct stm32_dma_desc *desc; size_t xfer_count, offset; - u32 num_sgs, best_burst, dma_burst, threshold; - int i; + u32 num_sgs, best_burst, threshold; + int dma_burst, i; num_sgs = DIV_ROUND_UP(len, STM32_DMA_ALIGNED_MAX_DATA_ITEMS); desc = kzalloc(struct_size(desc, sg_req, num_sgs), GFP_NOWAIT); @@ -1266,6 +1266,10 @@ static struct dma_async_tx_descriptor *stm32_dma_prep_dma_memcpy( best_burst = stm32_dma_get_best_burst(len, STM32_DMA_MAX_BURST, threshold, max_width); dma_burst = stm32_dma_get_burst(chan, best_burst); + if (dma_burst < 0) { + kfree(desc); + return NULL; + } stm32_dma_clear_reg(&desc->sg_req[i].chan_reg); desc->sg_req[i].chan_reg.dma_scr = -- cgit v1.2.3 From 0376b995bb7a65fb0c056f3adc5e9695ad0c1805 Mon Sep 17 00:00:00 2001 From: Ranjani Sridharan Date: Fri, 24 Nov 2023 15:57:42 +0200 Subject: ASoC: SOF: ipc4-topology: Add core_mask in struct snd_sof_pipeline MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit With IPC4, a pipeline may contain multiple modules in the data processing domain and they can be scheduled to run on different cores. Add a new field in struct snd_sof_pipeline to keep track of all the cores that are associated with the modules in the pipeline. Set the pipeline core mask for IPC3 when initializing the pipeline widget IPC structure. For IPC4, set the core mark when initializing the pipeline widget and initializing processing modules in the data processing domain. Signed-off-by: Ranjani Sridharan Reviewed-by: Pierre-Louis Bossart Reviewed-by: Péter Ujfalusi Signed-off-by: Peter Ujfalusi Link: https://lore.kernel.org/r/20231124135743.24674-2-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown --- sound/soc/sof/ipc3-topology.c | 2 ++ sound/soc/sof/ipc4-topology.c | 9 +++++++++ sound/soc/sof/sof-audio.h | 2 ++ 3 files changed, 13 insertions(+) diff --git a/sound/soc/sof/ipc3-topology.c b/sound/soc/sof/ipc3-topology.c index ba4ef290b634..2c7a5e7a364c 100644 --- a/sound/soc/sof/ipc3-topology.c +++ b/sound/soc/sof/ipc3-topology.c @@ -493,6 +493,7 @@ static int sof_ipc3_widget_setup_comp_mixer(struct snd_sof_widget *swidget) static int sof_ipc3_widget_setup_comp_pipeline(struct snd_sof_widget *swidget) { struct snd_soc_component *scomp = swidget->scomp; + struct snd_sof_pipeline *spipe = swidget->spipe; struct sof_ipc_pipe_new *pipeline; struct snd_sof_widget *comp_swidget; int ret; @@ -545,6 +546,7 @@ static int sof_ipc3_widget_setup_comp_pipeline(struct snd_sof_widget *swidget) swidget->dynamic_pipeline_widget); swidget->core = pipeline->core; + spipe->core_mask |= BIT(pipeline->core); return 0; diff --git a/sound/soc/sof/ipc4-topology.c b/sound/soc/sof/ipc4-topology.c index b24a64377f68..19f36db30979 100644 --- a/sound/soc/sof/ipc4-topology.c +++ b/sound/soc/sof/ipc4-topology.c @@ -656,6 +656,7 @@ static int sof_ipc4_widget_setup_comp_pipeline(struct snd_sof_widget *swidget) { struct snd_soc_component *scomp = swidget->scomp; struct sof_ipc4_pipeline *pipeline; + struct snd_sof_pipeline *spipe = swidget->spipe; int ret; pipeline = kzalloc(sizeof(*pipeline), GFP_KERNEL); @@ -670,6 +671,7 @@ static int sof_ipc4_widget_setup_comp_pipeline(struct snd_sof_widget *swidget) } swidget->core = pipeline->core_id; + spipe->core_mask |= BIT(pipeline->core_id); if (pipeline->use_chain_dma) { dev_dbg(scomp->dev, "Set up chain DMA for %s\n", swidget->widget->name); @@ -797,6 +799,7 @@ err: static int sof_ipc4_widget_setup_comp_src(struct snd_sof_widget *swidget) { struct snd_soc_component *scomp = swidget->scomp; + struct snd_sof_pipeline *spipe = swidget->spipe; struct sof_ipc4_src *src; int ret; @@ -819,6 +822,8 @@ static int sof_ipc4_widget_setup_comp_src(struct snd_sof_widget *swidget) goto err; } + spipe->core_mask |= BIT(swidget->core); + dev_dbg(scomp->dev, "SRC sink rate %d\n", src->sink_rate); ret = sof_ipc4_widget_setup_msg(swidget, &src->msg); @@ -864,6 +869,7 @@ static int sof_ipc4_widget_setup_comp_process(struct snd_sof_widget *swidget) { struct snd_soc_component *scomp = swidget->scomp; struct sof_ipc4_fw_module *fw_module; + struct snd_sof_pipeline *spipe = swidget->spipe; struct sof_ipc4_process *process; void *cfg; int ret; @@ -920,6 +926,9 @@ static int sof_ipc4_widget_setup_comp_process(struct snd_sof_widget *swidget) sof_ipc4_widget_update_kcontrol_module_id(swidget); + /* set pipeline core mask to keep track of the core the module is scheduled to run on */ + spipe->core_mask |= BIT(swidget->core); + return 0; free_base_cfg_ext: kfree(process->base_config_ext); diff --git a/sound/soc/sof/sof-audio.h b/sound/soc/sof/sof-audio.h index 5d5eeb1a1a6f..a6d6bcd00cee 100644 --- a/sound/soc/sof/sof-audio.h +++ b/sound/soc/sof/sof-audio.h @@ -480,6 +480,7 @@ struct snd_sof_widget { * @paused_count: Count of number of PCM's that have started and have currently paused this pipeline * @complete: flag used to indicate that pipeline set up is complete. + * @core_mask: Mask containing target cores for all modules in the pipeline * @list: List item in sdev pipeline_list */ struct snd_sof_pipeline { @@ -487,6 +488,7 @@ struct snd_sof_pipeline { int started_count; int paused_count; int complete; + unsigned long core_mask; struct list_head list; }; -- cgit v1.2.3 From 31ed8da1c8e5e504710bb36863700e3389f8fc81 Mon Sep 17 00:00:00 2001 From: Ranjani Sridharan Date: Fri, 24 Nov 2023 15:57:43 +0200 Subject: ASoC: SOF: sof-audio: Modify logic for enabling/disabling topology cores MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit In the current code, we enable a widget core when it is set up and disable it when it is freed. This is problematic with IPC4 because widget free is essentially a NOP and all widgets are freed in the firmware when the pipeline is deleted. This results in a crash during pipeline deletion when one of it's widgets is scheduled to run on a secondary core and is powered off when widget is freed. So, change the logic to enable all cores needed by all the modules in a pipeline when the pipeline widget is set up and disable them after the pipeline widget is freed. Signed-off-by: Ranjani Sridharan Reviewed-by: Pierre-Louis Bossart Reviewed-by: Péter Ujfalusi Signed-off-by: Peter Ujfalusi Link: https://lore.kernel.org/r/20231124135743.24674-3-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown --- sound/soc/sof/sof-audio.c | 65 ++++++++++++++++++++++++++++++----------------- 1 file changed, 41 insertions(+), 24 deletions(-) diff --git a/sound/soc/sof/sof-audio.c b/sound/soc/sof/sof-audio.c index 563fe6f7789f..77cc64ac7113 100644 --- a/sound/soc/sof/sof-audio.c +++ b/sound/soc/sof/sof-audio.c @@ -46,6 +46,7 @@ static int sof_widget_free_unlocked(struct snd_sof_dev *sdev, struct snd_sof_widget *swidget) { const struct sof_ipc_tplg_ops *tplg_ops = sof_ipc_get_ops(sdev, tplg); + struct snd_sof_pipeline *spipe = swidget->spipe; struct snd_sof_widget *pipe_widget; int err = 0; int ret; @@ -87,15 +88,22 @@ static int sof_widget_free_unlocked(struct snd_sof_dev *sdev, } /* - * disable widget core. continue to route setup status and complete flag - * even if this fails and return the appropriate error + * decrement ref count for cores associated with all modules in the pipeline and clear + * the complete flag */ - ret = snd_sof_dsp_core_put(sdev, swidget->core); - if (ret < 0) { - dev_err(sdev->dev, "error: failed to disable target core: %d for widget %s\n", - swidget->core, swidget->widget->name); - if (!err) - err = ret; + if (swidget->id == snd_soc_dapm_scheduler) { + int i; + + for_each_set_bit(i, &spipe->core_mask, sdev->num_cores) { + ret = snd_sof_dsp_core_put(sdev, i); + if (ret < 0) { + dev_err(sdev->dev, "failed to disable target core: %d for pipeline %s\n", + i, swidget->widget->name); + if (!err) + err = ret; + } + } + swidget->spipe->complete = 0; } /* @@ -108,10 +116,6 @@ static int sof_widget_free_unlocked(struct snd_sof_dev *sdev, err = ret; } - /* clear pipeline complete */ - if (swidget->id == snd_soc_dapm_scheduler) - swidget->spipe->complete = 0; - if (!err) dev_dbg(sdev->dev, "widget %s freed\n", swidget->widget->name); @@ -134,8 +138,10 @@ static int sof_widget_setup_unlocked(struct snd_sof_dev *sdev, struct snd_sof_widget *swidget) { const struct sof_ipc_tplg_ops *tplg_ops = sof_ipc_get_ops(sdev, tplg); + struct snd_sof_pipeline *spipe = swidget->spipe; bool use_count_decremented = false; int ret; + int i; /* skip if there is no private data */ if (!swidget->private) @@ -166,19 +172,23 @@ static int sof_widget_setup_unlocked(struct snd_sof_dev *sdev, goto use_count_dec; } - /* enable widget core */ - ret = snd_sof_dsp_core_get(sdev, swidget->core); - if (ret < 0) { - dev_err(sdev->dev, "error: failed to enable target core for widget %s\n", - swidget->widget->name); - goto pipe_widget_free; + /* update ref count for cores associated with all modules in the pipeline */ + if (swidget->id == snd_soc_dapm_scheduler) { + for_each_set_bit(i, &spipe->core_mask, sdev->num_cores) { + ret = snd_sof_dsp_core_get(sdev, i); + if (ret < 0) { + dev_err(sdev->dev, "failed to enable target core %d for pipeline %s\n", + i, swidget->widget->name); + goto pipe_widget_free; + } + } } /* setup widget in the DSP */ if (tplg_ops && tplg_ops->widget_setup) { ret = tplg_ops->widget_setup(sdev, swidget); if (ret < 0) - goto core_put; + goto pipe_widget_free; } /* send config for DAI components */ @@ -208,15 +218,22 @@ static int sof_widget_setup_unlocked(struct snd_sof_dev *sdev, return 0; widget_free: - /* widget use_count and core ref_count will both be decremented by sof_widget_free() */ + /* widget use_count will be decremented by sof_widget_free() */ sof_widget_free_unlocked(sdev, swidget); use_count_decremented = true; -core_put: - if (!use_count_decremented) - snd_sof_dsp_core_put(sdev, swidget->core); pipe_widget_free: - if (swidget->id != snd_soc_dapm_scheduler) + if (swidget->id != snd_soc_dapm_scheduler) { sof_widget_free_unlocked(sdev, swidget->spipe->pipe_widget); + } else { + int j; + + /* decrement ref count for all cores that were updated previously */ + for_each_set_bit(j, &spipe->core_mask, sdev->num_cores) { + if (j >= i) + break; + snd_sof_dsp_core_put(sdev, j); + } + } use_count_dec: if (!use_count_decremented) swidget->use_count--; -- cgit v1.2.3 From 0167236e7d66c5e1e85d902a6abc2529b7544539 Mon Sep 17 00:00:00 2001 From: David Howells Date: Thu, 26 Oct 2023 01:25:07 +0100 Subject: afs: Return ENOENT if no cell DNS record can be found Make AFS return error ENOENT if no cell SRV or AFSDB DNS record (or cellservdb config file record) can be found rather than returning EDESTADDRREQ. Also add cell name lookup info to the cursor dump. Fixes: d5c32c89b208 ("afs: Fix cell DNS lookup") Reported-by: Markus Suvanto Link: https://bugzilla.kernel.org/show_bug.cgi?id=216637 Signed-off-by: David Howells Reviewed-by: Marc Dionne cc: linux-afs@lists.infradead.org --- fs/afs/vl_rotate.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/fs/afs/vl_rotate.c b/fs/afs/vl_rotate.c index 488e58490b16..eb415ce56360 100644 --- a/fs/afs/vl_rotate.c +++ b/fs/afs/vl_rotate.c @@ -58,6 +58,12 @@ static bool afs_start_vl_iteration(struct afs_vl_cursor *vc) } /* Status load is ordered after lookup counter load */ + if (cell->dns_status == DNS_LOOKUP_GOT_NOT_FOUND) { + pr_warn("No record of cell %s\n", cell->name); + vc->error = -ENOENT; + return false; + } + if (cell->dns_source == DNS_RECORD_UNAVAILABLE) { vc->error = -EDESTADDRREQ; return false; @@ -285,6 +291,7 @@ failed: */ static void afs_vl_dump_edestaddrreq(const struct afs_vl_cursor *vc) { + struct afs_cell *cell = vc->cell; static int count; int i; @@ -294,6 +301,9 @@ static void afs_vl_dump_edestaddrreq(const struct afs_vl_cursor *vc) rcu_read_lock(); pr_notice("EDESTADDR occurred\n"); + pr_notice("CELL: %s err=%d\n", cell->name, cell->error); + pr_notice("DNS: src=%u st=%u lc=%x\n", + cell->dns_source, cell->dns_status, cell->dns_lookup_count); pr_notice("VC: ut=%lx ix=%u ni=%hu fl=%hx err=%hd\n", vc->untried, vc->index, vc->nr_iterations, vc->flags, vc->error); -- cgit v1.2.3 From b590eb41be766c5a63acc7e8896a042f7a4e8293 Mon Sep 17 00:00:00 2001 From: David Howells Date: Wed, 1 Nov 2023 22:03:28 +0000 Subject: afs: Fix file locking on R/O volumes to operate in local mode AFS doesn't really do locking on R/O volumes as fileservers don't maintain state with each other and thus a lock on a R/O volume file on one fileserver will not be be visible to someone looking at the same file on another fileserver. Further, the server may return an error if you try it. Fix this by doing what other AFS clients do and handle filelocking on R/O volume files entirely within the client and don't touch the server. Fixes: 6c6c1d63c243 ("afs: Provide mount-time configurable byte-range file locking emulation") Signed-off-by: David Howells Reviewed-by: Marc Dionne cc: linux-afs@lists.infradead.org --- fs/afs/super.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/fs/afs/super.c b/fs/afs/super.c index 95d713074dc8..e95fb4cb4fcd 100644 --- a/fs/afs/super.c +++ b/fs/afs/super.c @@ -407,6 +407,8 @@ static int afs_validate_fc(struct fs_context *fc) return PTR_ERR(volume); ctx->volume = volume; + if (volume->type != AFSVL_RWVOL) + ctx->flock_mode = afs_flock_mode_local; } return 0; -- cgit v1.2.3 From 68516f60c1d8b0a71e516d630f66b99cb50e0150 Mon Sep 17 00:00:00 2001 From: David Howells Date: Thu, 2 Nov 2023 16:24:00 +0000 Subject: afs: Mark a superblock for an R/O or Backup volume as SB_RDONLY Mark a superblock that is for for an R/O or Backup volume as SB_RDONLY when mounting it. Signed-off-by: David Howells cc: Marc Dionne cc: linux-afs@lists.infradead.org --- fs/afs/super.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/fs/afs/super.c b/fs/afs/super.c index e95fb4cb4fcd..a01a0fb2cdbb 100644 --- a/fs/afs/super.c +++ b/fs/afs/super.c @@ -407,8 +407,10 @@ static int afs_validate_fc(struct fs_context *fc) return PTR_ERR(volume); ctx->volume = volume; - if (volume->type != AFSVL_RWVOL) + if (volume->type != AFSVL_RWVOL) { ctx->flock_mode = afs_flock_mode_local; + fc->sb_flags |= SB_RDONLY; + } } return 0; -- cgit v1.2.3 From 237ff253f2d4f6307b7b20434d7cbcc67693298b Mon Sep 17 00:00:00 2001 From: Edward Adam Davis Date: Thu, 23 Nov 2023 09:23:39 +0800 Subject: mptcp: fix uninit-value in mptcp_incoming_options Added initialization use_ack to mptcp_parse_option(). Reported-by: syzbot+b834a6b2decad004cfa1@syzkaller.appspotmail.com Signed-off-by: Edward Adam Davis Acked-by: Paolo Abeni Signed-off-by: David S. Miller --- net/mptcp/options.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/mptcp/options.c b/net/mptcp/options.c index cd15ec73073e..c53914012d01 100644 --- a/net/mptcp/options.c +++ b/net/mptcp/options.c @@ -108,6 +108,7 @@ static void mptcp_parse_option(const struct sk_buff *skb, mp_opt->suboptions |= OPTION_MPTCP_DSS; mp_opt->use_map = 1; mp_opt->mpc_map = 1; + mp_opt->use_ack = 0; mp_opt->data_len = get_unaligned_be16(ptr); ptr += 2; } -- cgit v1.2.3 From e2b706c691905fe78468c361aaabc719d0a496f1 Mon Sep 17 00:00:00 2001 From: Zhengchao Shao Date: Thu, 23 Nov 2023 15:13:14 +0800 Subject: ipv4: igmp: fix refcnt uaf issue when receiving igmp query packet When I perform the following test operations: 1.ip link add br0 type bridge 2.brctl addif br0 eth0 3.ip addr add 239.0.0.1/32 dev eth0 4.ip addr add 239.0.0.1/32 dev br0 5.ip addr add 224.0.0.1/32 dev br0 6.while ((1)) do ifconfig br0 up ifconfig br0 down done 7.send IGMPv2 query packets to port eth0 continuously. For example, ./mausezahn ethX -c 0 "01 00 5e 00 00 01 00 72 19 88 aa 02 08 00 45 00 00 1c 00 01 00 00 01 02 0e 7f c0 a8 0a b7 e0 00 00 01 11 64 ee 9b 00 00 00 00" The preceding tests may trigger the refcnt uaf issue of the mc list. The stack is as follows: refcount_t: addition on 0; use-after-free. WARNING: CPU: 21 PID: 144 at lib/refcount.c:25 refcount_warn_saturate (lib/refcount.c:25) CPU: 21 PID: 144 Comm: ksoftirqd/21 Kdump: loaded Not tainted 6.7.0-rc1-next-20231117-dirty #80 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 RIP: 0010:refcount_warn_saturate (lib/refcount.c:25) RSP: 0018:ffffb68f00657910 EFLAGS: 00010286 RAX: 0000000000000000 RBX: ffff8a00c3bf96c0 RCX: ffff8a07b6160908 RDX: 00000000ffffffd8 RSI: 0000000000000027 RDI: ffff8a07b6160900 RBP: ffff8a00cba36862 R08: 0000000000000000 R09: 00000000ffff7fff R10: ffffb68f006577c0 R11: ffffffffb0fdcdc8 R12: ffff8a00c3bf9680 R13: ffff8a00c3bf96f0 R14: 0000000000000000 R15: ffff8a00d8766e00 FS: 0000000000000000(0000) GS:ffff8a07b6140000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055f10b520b28 CR3: 000000039741a000 CR4: 00000000000006f0 Call Trace: igmp_heard_query (net/ipv4/igmp.c:1068) igmp_rcv (net/ipv4/igmp.c:1132) ip_protocol_deliver_rcu (net/ipv4/ip_input.c:205) ip_local_deliver_finish (net/ipv4/ip_input.c:234) __netif_receive_skb_one_core (net/core/dev.c:5529) netif_receive_skb_internal (net/core/dev.c:5729) netif_receive_skb (net/core/dev.c:5788) br_handle_frame_finish (net/bridge/br_input.c:216) nf_hook_bridge_pre (net/bridge/br_input.c:294) __netif_receive_skb_core (net/core/dev.c:5423) __netif_receive_skb_list_core (net/core/dev.c:5606) __netif_receive_skb_list (net/core/dev.c:5674) netif_receive_skb_list_internal (net/core/dev.c:5764) napi_gro_receive (net/core/gro.c:609) e1000_clean_rx_irq (drivers/net/ethernet/intel/e1000/e1000_main.c:4467) e1000_clean (drivers/net/ethernet/intel/e1000/e1000_main.c:3805) __napi_poll (net/core/dev.c:6533) net_rx_action (net/core/dev.c:6735) __do_softirq (kernel/softirq.c:554) run_ksoftirqd (kernel/softirq.c:913) smpboot_thread_fn (kernel/smpboot.c:164) kthread (kernel/kthread.c:388) ret_from_fork (arch/x86/kernel/process.c:153) ret_from_fork_asm (arch/x86/entry/entry_64.S:250) The root causes are as follows: Thread A Thread B ... netif_receive_skb br_dev_stop ... br_multicast_leave_snoopers ... __ip_mc_dec_group ... __igmp_group_dropped igmp_rcv igmp_stop_timer igmp_heard_query //ref = 1 ip_ma_put igmp_mod_timer refcount_dec_and_test igmp_start_timer //ref = 0 ... refcount_inc //ref increases from 0 When the device receives an IGMPv2 Query message, it starts the timer immediately, regardless of whether the device is running. If the device is down and has left the multicast group, it will cause the mc list refcount uaf issue. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Zhengchao Shao Reviewed-by: Eric Dumazet Reviewed-by: Hangbin Liu Signed-off-by: David S. Miller --- net/ipv4/igmp.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/net/ipv4/igmp.c b/net/ipv4/igmp.c index 76c3ea75b8dd..efeeca2b1328 100644 --- a/net/ipv4/igmp.c +++ b/net/ipv4/igmp.c @@ -216,8 +216,10 @@ static void igmp_start_timer(struct ip_mc_list *im, int max_delay) int tv = get_random_u32_below(max_delay); im->tm_running = 1; - if (!mod_timer(&im->timer, jiffies+tv+2)) - refcount_inc(&im->refcnt); + if (refcount_inc_not_zero(&im->refcnt)) { + if (mod_timer(&im->timer, jiffies + tv + 2)) + ip_ma_put(im); + } } static void igmp_gq_start_timer(struct in_device *in_dev) -- cgit v1.2.3 From bb6cc253861bd5a7cf8439e2118659696df9619f Mon Sep 17 00:00:00 2001 From: Markus Weippert Date: Fri, 24 Nov 2023 16:14:37 +0100 Subject: bcache: revert replacing IS_ERR_OR_NULL with IS_ERR Commit 028ddcac477b ("bcache: Remove unnecessary NULL point check in node allocations") replaced IS_ERR_OR_NULL by IS_ERR. This leads to a NULL pointer dereference. BUG: kernel NULL pointer dereference, address: 0000000000000080 Call Trace: ? __die_body.cold+0x1a/0x1f ? page_fault_oops+0xd2/0x2b0 ? exc_page_fault+0x70/0x170 ? asm_exc_page_fault+0x22/0x30 ? btree_node_free+0xf/0x160 [bcache] ? up_write+0x32/0x60 btree_gc_coalesce+0x2aa/0x890 [bcache] ? bch_extent_bad+0x70/0x170 [bcache] btree_gc_recurse+0x130/0x390 [bcache] ? btree_gc_mark_node+0x72/0x230 [bcache] bch_btree_gc+0x5da/0x600 [bcache] ? cpuusage_read+0x10/0x10 ? bch_btree_gc+0x600/0x600 [bcache] bch_gc_thread+0x135/0x180 [bcache] The relevant code starts with: new_nodes[0] = NULL; for (i = 0; i < nodes; i++) { if (__bch_keylist_realloc(&keylist, bkey_u64s(&r[i].b->key))) goto out_nocoalesce; // ... out_nocoalesce: // ... for (i = 0; i < nodes; i++) if (!IS_ERR(new_nodes[i])) { // IS_ERR_OR_NULL before 028ddcac477b btree_node_free(new_nodes[i]); // new_nodes[0] is NULL rw_unlock(true, new_nodes[i]); } This patch replaces IS_ERR() by IS_ERR_OR_NULL() to fix this. Fixes: 028ddcac477b ("bcache: Remove unnecessary NULL point check in node allocations") Link: https://lore.kernel.org/all/3DF4A87A-2AC1-4893-AE5F-E921478419A9@suse.de/ Cc: stable@vger.kernel.org Cc: Zheng Wang Cc: Coly Li Signed-off-by: Markus Weippert Signed-off-by: Jens Axboe --- drivers/md/bcache/btree.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/md/bcache/btree.c b/drivers/md/bcache/btree.c index de3019972b35..261596791218 100644 --- a/drivers/md/bcache/btree.c +++ b/drivers/md/bcache/btree.c @@ -1522,7 +1522,7 @@ out_nocoalesce: bch_keylist_free(&keylist); for (i = 0; i < nodes; i++) - if (!IS_ERR(new_nodes[i])) { + if (!IS_ERR_OR_NULL(new_nodes[i])) { btree_node_free(new_nodes[i]); rw_unlock(true, new_nodes[i]); } -- cgit v1.2.3 From 71b5e40651d89a8685bea1592dfcd2aa61559628 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Wed, 27 Sep 2023 15:40:41 +0300 Subject: wifi: iwlwifi: mvm: fix an error code in iwl_mvm_mld_add_sta() This error path should return -EINVAL instead of success. Fixes: 57974a55d995 ("wifi: iwlwifi: mvm: refactor iwl_mvm_mac_sta_state_common()") Signed-off-by: Dan Carpenter Acked-by: Gregory Greenman Link: https://lore.kernel.org/r/75e4ea09-db58-462f-bd4e-5ad4e5e5dcb5@moroto.mountain Signed-off-by: Johannes Berg --- drivers/net/wireless/intel/iwlwifi/mvm/mld-sta.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/mld-sta.c b/drivers/net/wireless/intel/iwlwifi/mvm/mld-sta.c index ca5e4fbcf8ce..6af606e5da65 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/mld-sta.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/mld-sta.c @@ -707,8 +707,10 @@ int iwl_mvm_mld_add_sta(struct iwl_mvm *mvm, struct ieee80211_vif *vif, rcu_dereference_protected(mvm_sta->link[link_id], lockdep_is_held(&mvm->mutex)); - if (WARN_ON(!link_conf || !mvm_link_sta)) + if (WARN_ON(!link_conf || !mvm_link_sta)) { + ret = -EINVAL; goto err; + } ret = iwl_mvm_mld_cfg_sta(mvm, sta, vif, link_sta, link_conf, mvm_link_sta); -- cgit v1.2.3 From 3e3a2b645c043f7e3e488d5011478cefb69bbe8b Mon Sep 17 00:00:00 2001 From: Oldřich Jedlička Date: Sat, 4 Nov 2023 15:13:33 +0100 Subject: wifi: mac80211: do not pass AP_VLAN vif pointer to drivers during flush MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This fixes WARN_ONs when using AP_VLANs after station removal. The flush call passed AP_VLAN vif to driver, but because these vifs are virtual and not registered with drivers, we need to translate to the correct AP vif first. Closes: https://github.com/openwrt/openwrt/issues/12420 Fixes: 0b75a1b1e42e ("wifi: mac80211: flush queues on STA removal") Fixes: d00800a289c9 ("wifi: mac80211: add flush_sta method") Tested-by: Konstantin Demin Tested-by: Koen Vandeputte Signed-off-by: Oldřich Jedlička Link: https://lore.kernel.org/r/20231104141333.3710-1-oldium.pro@gmail.com Signed-off-by: Johannes Berg --- net/mac80211/driver-ops.h | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/net/mac80211/driver-ops.h b/net/mac80211/driver-ops.h index 568633b38c47..f690c385a345 100644 --- a/net/mac80211/driver-ops.h +++ b/net/mac80211/driver-ops.h @@ -23,7 +23,7 @@ static inline struct ieee80211_sub_if_data * get_bss_sdata(struct ieee80211_sub_if_data *sdata) { - if (sdata->vif.type == NL80211_IFTYPE_AP_VLAN) + if (sdata && sdata->vif.type == NL80211_IFTYPE_AP_VLAN) sdata = container_of(sdata->bss, struct ieee80211_sub_if_data, u.ap); @@ -695,11 +695,14 @@ static inline void drv_flush(struct ieee80211_local *local, struct ieee80211_sub_if_data *sdata, u32 queues, bool drop) { - struct ieee80211_vif *vif = sdata ? &sdata->vif : NULL; + struct ieee80211_vif *vif; might_sleep(); lockdep_assert_wiphy(local->hw.wiphy); + sdata = get_bss_sdata(sdata); + vif = sdata ? &sdata->vif : NULL; + if (sdata && !check_sdata_in_driver(sdata)) return; @@ -716,6 +719,8 @@ static inline void drv_flush_sta(struct ieee80211_local *local, might_sleep(); lockdep_assert_wiphy(local->hw.wiphy); + sdata = get_bss_sdata(sdata); + if (sdata && !check_sdata_in_driver(sdata)) return; -- cgit v1.2.3 From 7e7efdda6adb385fbdfd6f819d76bc68c923c394 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 6 Nov 2023 23:17:16 +0100 Subject: wifi: cfg80211: fix CQM for non-range use My prior race fix here broke CQM when ranges aren't used, as the reporting worker now requires the cqm_config to be set in the wdev, but isn't set when there's no range configured. Rather than continuing to special-case the range version, set the cqm_config always and configure accordingly, also tracking if range was used or not to be able to clear the configuration appropriately with the same API, which was actually not right if both were implemented by a driver for some reason, as is the case with mac80211 (though there the implementations are equivalent so it doesn't matter.) Also, the original multiple-RSSI commit lost checking for the callback, so might have potentially crashed if a driver had neither implementation, and userspace tried to use it despite not being advertised as supported. Cc: stable@vger.kernel.org Fixes: 4a4b8169501b ("cfg80211: Accept multiple RSSI thresholds for CQM") Fixes: 37c20b2effe9 ("wifi: cfg80211: fix cqm_config access race") Signed-off-by: Johannes Berg --- net/wireless/core.h | 1 + net/wireless/nl80211.c | 50 +++++++++++++++++++++++++++++++------------------- 2 files changed, 32 insertions(+), 19 deletions(-) diff --git a/net/wireless/core.h b/net/wireless/core.h index 4c692c7faf30..cb61d33d4f1e 100644 --- a/net/wireless/core.h +++ b/net/wireless/core.h @@ -293,6 +293,7 @@ struct cfg80211_cqm_config { u32 rssi_hyst; s32 last_rssi_event_value; enum nl80211_cqm_rssi_threshold_event last_rssi_event_type; + bool use_range_api; int n_rssi_thresholds; s32 rssi_thresholds[] __counted_by(n_rssi_thresholds); }; diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index 569234bc2be6..dbfed5a2d7b6 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -12787,10 +12787,6 @@ static int cfg80211_cqm_rssi_update(struct cfg80211_registered_device *rdev, int i, n, low_index; int err; - /* RSSI reporting disabled? */ - if (!cqm_config) - return rdev_set_cqm_rssi_range_config(rdev, dev, 0, 0); - /* * Obtain current RSSI value if possible, if not and no RSSI threshold * event has been received yet, we should receive an event after a @@ -12865,23 +12861,25 @@ static int nl80211_set_cqm_rssi(struct genl_info *info, wdev->iftype != NL80211_IFTYPE_P2P_CLIENT) return -EOPNOTSUPP; - if (n_thresholds <= 1 && rdev->ops->set_cqm_rssi_config) { - if (n_thresholds == 0 || thresholds[0] == 0) /* Disabling */ - return rdev_set_cqm_rssi_config(rdev, dev, 0, 0); - - return rdev_set_cqm_rssi_config(rdev, dev, - thresholds[0], hysteresis); - } - - if (!wiphy_ext_feature_isset(&rdev->wiphy, - NL80211_EXT_FEATURE_CQM_RSSI_LIST)) - return -EOPNOTSUPP; - if (n_thresholds == 1 && thresholds[0] == 0) /* Disabling */ n_thresholds = 0; old = wiphy_dereference(wdev->wiphy, wdev->cqm_config); + /* if already disabled just succeed */ + if (!n_thresholds && !old) + return 0; + + if (n_thresholds > 1) { + if (!wiphy_ext_feature_isset(&rdev->wiphy, + NL80211_EXT_FEATURE_CQM_RSSI_LIST) || + !rdev->ops->set_cqm_rssi_range_config) + return -EOPNOTSUPP; + } else { + if (!rdev->ops->set_cqm_rssi_config) + return -EOPNOTSUPP; + } + if (n_thresholds) { cqm_config = kzalloc(struct_size(cqm_config, rssi_thresholds, n_thresholds), @@ -12894,13 +12892,26 @@ static int nl80211_set_cqm_rssi(struct genl_info *info, memcpy(cqm_config->rssi_thresholds, thresholds, flex_array_size(cqm_config, rssi_thresholds, n_thresholds)); + cqm_config->use_range_api = n_thresholds > 1 || + !rdev->ops->set_cqm_rssi_config; rcu_assign_pointer(wdev->cqm_config, cqm_config); + + if (cqm_config->use_range_api) + err = cfg80211_cqm_rssi_update(rdev, dev, cqm_config); + else + err = rdev_set_cqm_rssi_config(rdev, dev, + thresholds[0], + hysteresis); } else { RCU_INIT_POINTER(wdev->cqm_config, NULL); + /* if enabled as range also disable via range */ + if (old->use_range_api) + err = rdev_set_cqm_rssi_range_config(rdev, dev, 0, 0); + else + err = rdev_set_cqm_rssi_config(rdev, dev, 0, 0); } - err = cfg80211_cqm_rssi_update(rdev, dev, cqm_config); if (err) { rcu_assign_pointer(wdev->cqm_config, old); kfree_rcu(cqm_config, rcu_head); @@ -19009,10 +19020,11 @@ void cfg80211_cqm_rssi_notify_work(struct wiphy *wiphy, struct wiphy_work *work) s32 rssi_level; cqm_config = wiphy_dereference(wdev->wiphy, wdev->cqm_config); - if (!wdev->cqm_config) + if (!cqm_config) return; - cfg80211_cqm_rssi_update(rdev, wdev->netdev, cqm_config); + if (cqm_config->use_range_api) + cfg80211_cqm_rssi_update(rdev, wdev->netdev, cqm_config); rssi_level = cqm_config->last_rssi_event_value; rssi_event = cqm_config->last_rssi_event_type; -- cgit v1.2.3 From 8e2f6f2366219b3304b227bdd2f04b64c92e3e12 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 8 Nov 2023 13:41:25 +0100 Subject: wifi: cfg80211: lock wiphy mutex for rfkill poll We want to guarantee the mutex is held for pretty much all operations, so ensure that here as well. Reported-by: syzbot+7e59a5bfc7a897247e18@syzkaller.appspotmail.com Signed-off-by: Johannes Berg --- net/wireless/core.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/net/wireless/core.c b/net/wireless/core.c index 758c9a2a12c0..3f756ce46602 100644 --- a/net/wireless/core.c +++ b/net/wireless/core.c @@ -221,7 +221,9 @@ static void cfg80211_rfkill_poll(struct rfkill *rfkill, void *data) { struct cfg80211_registered_device *rdev = data; + wiphy_lock(&rdev->wiphy); rdev_rfkill_poll(rdev); + wiphy_unlock(&rdev->wiphy); } void cfg80211_stop_p2p_device(struct cfg80211_registered_device *rdev, -- cgit v1.2.3 From 103317670e6bf2542309db28d52444a83d84ed28 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 15 Nov 2023 13:06:16 +0100 Subject: wifi: cfg80211: hold wiphy mutex for send_interface Given all the locking rework in mac80211, we pretty much need to get into the driver with the wiphy mutex held in all callbacks. This is already mostly the case, but as Johan reported, in the get_txpower it may not be true. Lock the wiphy mutex around nl80211_send_iface(), then is also around callers of nl80211_notify_iface(). This is easy to do, fixes the problem, and aligns the locking between various calls to it in different parts of the code of cfg80211. Fixes: 0e8185ce1dde ("wifi: mac80211: check wiphy mutex in ops") Reported-by: Johan Hovold Closes: https://lore.kernel.org/r/ZVOXX6qg4vXEx8dX@hovoldconsulting.com Tested-by: Johan Hovold Signed-off-by: Johannes Berg --- net/wireless/core.c | 4 ++-- net/wireless/nl80211.c | 5 +++++ 2 files changed, 7 insertions(+), 2 deletions(-) diff --git a/net/wireless/core.c b/net/wireless/core.c index 3f756ce46602..409d74c57ca0 100644 --- a/net/wireless/core.c +++ b/net/wireless/core.c @@ -191,13 +191,13 @@ int cfg80211_switch_netns(struct cfg80211_registered_device *rdev, return err; } + wiphy_lock(&rdev->wiphy); list_for_each_entry(wdev, &rdev->wiphy.wdev_list, list) { if (!wdev->netdev) continue; nl80211_notify_iface(rdev, wdev, NL80211_CMD_DEL_INTERFACE); } - wiphy_lock(&rdev->wiphy); nl80211_notify_wiphy(rdev, NL80211_CMD_DEL_WIPHY); wiphy_net_set(&rdev->wiphy, net); @@ -206,13 +206,13 @@ int cfg80211_switch_netns(struct cfg80211_registered_device *rdev, WARN_ON(err); nl80211_notify_wiphy(rdev, NL80211_CMD_NEW_WIPHY); - wiphy_unlock(&rdev->wiphy); list_for_each_entry(wdev, &rdev->wiphy.wdev_list, list) { if (!wdev->netdev) continue; nl80211_notify_iface(rdev, wdev, NL80211_CMD_NEW_INTERFACE); } + wiphy_unlock(&rdev->wiphy); return 0; } diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index dbfed5a2d7b6..1cbbb11ea503 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -3822,6 +3822,8 @@ static int nl80211_send_iface(struct sk_buff *msg, u32 portid, u32 seq, int flag struct net_device *dev = wdev->netdev; void *hdr; + lockdep_assert_wiphy(&rdev->wiphy); + WARN_ON(cmd != NL80211_CMD_NEW_INTERFACE && cmd != NL80211_CMD_DEL_INTERFACE && cmd != NL80211_CMD_SET_INTERFACE); @@ -3989,6 +3991,7 @@ static int nl80211_dump_interface(struct sk_buff *skb, struct netlink_callback * if_idx = 0; + wiphy_lock(&rdev->wiphy); list_for_each_entry(wdev, &rdev->wiphy.wdev_list, list) { if (if_idx < if_start) { if_idx++; @@ -3998,10 +4001,12 @@ static int nl80211_dump_interface(struct sk_buff *skb, struct netlink_callback * cb->nlh->nlmsg_seq, NLM_F_MULTI, rdev, wdev, NL80211_CMD_NEW_INTERFACE) < 0) { + wiphy_unlock(&rdev->wiphy); goto out; } if_idx++; } + wiphy_unlock(&rdev->wiphy); wp_idx++; } -- cgit v1.2.3 From ef5828805842204dd0259ecfc132b5916c8a77ae Mon Sep 17 00:00:00 2001 From: Michael-CY Lee Date: Wed, 22 Nov 2023 11:02:37 +0800 Subject: wifi: avoid offset calculation on NULL pointer ieee80211_he_6ghz_oper() can be passed a NULL pointer and checks for that, but already did the calculation to inside of it before. Move it after the check. Signed-off-by: Michael-CY Lee Link: https://lore.kernel.org/r/20231122030237.31276-1-michael-cy.lee@mediatek.com [rewrite commit message] Signed-off-by: Johannes Berg --- include/linux/ieee80211.h | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index 958771bac9c0..c2ac9e9e7ee9 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -2830,12 +2830,14 @@ ieee80211_he_oper_size(const u8 *he_oper_ie) static inline const struct ieee80211_he_6ghz_oper * ieee80211_he_6ghz_oper(const struct ieee80211_he_operation *he_oper) { - const u8 *ret = (const void *)&he_oper->optional; + const u8 *ret; u32 he_oper_params; if (!he_oper) return NULL; + ret = (const void *)&he_oper->optional; + he_oper_params = le32_to_cpu(he_oper->he_oper_params); if (!(he_oper_params & IEEE80211_HE_OPERATION_6GHZ_OP_INFO)) -- cgit v1.2.3 From 00f7d153f3358a7c7e35aef66fcd9ceb95d90430 Mon Sep 17 00:00:00 2001 From: Ben Greear Date: Thu, 9 Nov 2023 10:22:01 -0800 Subject: wifi: mac80211: handle 320 MHz in ieee80211_ht_cap_ie_to_sta_ht_cap The new 320 MHz channel width wasn't handled, so connecting a station to a 320 MHz AP would limit the station to 20 MHz (on HT) after a warning, handle 320 MHz to fix that. Signed-off-by: Ben Greear Link: https://lore.kernel.org/r/20231109182201.495381-1-greearb@candelatech.com [write a proper commit message] Signed-off-by: Johannes Berg --- net/mac80211/ht.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/mac80211/ht.c b/net/mac80211/ht.c index 68cea2685224..749f4ecab990 100644 --- a/net/mac80211/ht.c +++ b/net/mac80211/ht.c @@ -271,6 +271,7 @@ bool ieee80211_ht_cap_ie_to_sta_ht_cap(struct ieee80211_sub_if_data *sdata, case NL80211_CHAN_WIDTH_80: case NL80211_CHAN_WIDTH_80P80: case NL80211_CHAN_WIDTH_160: + case NL80211_CHAN_WIDTH_320: bw = ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40 ? IEEE80211_STA_RX_BW_40 : IEEE80211_STA_RX_BW_20; break; -- cgit v1.2.3 From 5de0434bc064606d6b7467ec3e5ad22963a18c04 Mon Sep 17 00:00:00 2001 From: David Sterba Date: Tue, 14 Nov 2023 17:44:11 +0100 Subject: btrfs: fix 64bit compat send ioctl arguments not initializing version member When the send protocol versioning was added in 5.16 e77fbf990316 ("btrfs: send: prepare for v2 protocol"), the 32/64bit compat code was not updated (added by 2351f431f727 ("btrfs: fix send ioctl on 32bit with 64bit kernel")), missing the version struct member. The compat code is probably rarely used, nobody reported any bugs. Found by tool https://github.com/jirislaby/clang-struct . Fixes: e77fbf990316 ("btrfs: send: prepare for v2 protocol") CC: stable@vger.kernel.org # 6.1+ Reviewed-by: Filipe Manana Signed-off-by: David Sterba --- fs/btrfs/ioctl.c | 1 + 1 file changed, 1 insertion(+) diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c index f7e94aff41ae..2429ae87ad44 100644 --- a/fs/btrfs/ioctl.c +++ b/fs/btrfs/ioctl.c @@ -4358,6 +4358,7 @@ static int _btrfs_ioctl_send(struct inode *inode, void __user *argp, bool compat arg->clone_sources = compat_ptr(args32.clone_sources); arg->parent_root = args32.parent_root; arg->flags = args32.flags; + arg->version = args32.version; memcpy(arg->reserved, args32.reserved, sizeof(args32.reserved)); #else -- cgit v1.2.3 From 94dbf7c0871f7ae6349ba4b0341ce8f5f98a071d Mon Sep 17 00:00:00 2001 From: Qu Wenruo Date: Fri, 24 Nov 2023 14:53:50 +1030 Subject: btrfs: free the allocated memory if btrfs_alloc_page_array() fails [BUG] If btrfs_alloc_page_array() fail to allocate all pages but part of the slots, then the partially allocated pages would be leaked in function btrfs_submit_compressed_read(). [CAUSE] As explicitly stated, if btrfs_alloc_page_array() returned -ENOMEM, caller is responsible to free the partially allocated pages. For the existing call sites, most of them are fine: - btrfs_raid_bio::stripe_pages Handled by free_raid_bio(). - extent_buffer::pages[] Handled btrfs_release_extent_buffer_pages(). - scrub_stripe::pages[] Handled by release_scrub_stripe(). But there is one exception in btrfs_submit_compressed_read(), if btrfs_alloc_page_array() failed, we didn't cleanup the array and freed the array pointer directly. Initially there is still the error handling in commit dd137dd1f2d7 ("btrfs: factor out allocating an array of pages"), but later in commit 544fe4a903ce ("btrfs: embed a btrfs_bio into struct compressed_bio"), the error handling is removed, leading to the possible memory leak. [FIX] This patch would add back the error handling first, then to prevent such situation from happening again, also Make btrfs_alloc_page_array() to free the allocated pages as a extra safety net, then we don't need to add the error handling to btrfs_submit_compressed_read(). Fixes: 544fe4a903ce ("btrfs: embed a btrfs_bio into struct compressed_bio") CC: stable@vger.kernel.org # 6.4+ Reviewed-by: Filipe Manana Signed-off-by: Qu Wenruo Reviewed-by: David Sterba Signed-off-by: David Sterba --- fs/btrfs/extent_io.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) diff --git a/fs/btrfs/extent_io.c b/fs/btrfs/extent_io.c index 03cef28d9e37..e6230a6ffa98 100644 --- a/fs/btrfs/extent_io.c +++ b/fs/btrfs/extent_io.c @@ -674,8 +674,8 @@ static void end_bio_extent_readpage(struct btrfs_bio *bbio) * the array will be skipped * * Return: 0 if all pages were able to be allocated; - * -ENOMEM otherwise, and the caller is responsible for freeing all - * non-null page pointers in the array. + * -ENOMEM otherwise, the partially allocated pages would be freed and + * the array slots zeroed */ int btrfs_alloc_page_array(unsigned int nr_pages, struct page **page_array) { @@ -694,8 +694,13 @@ int btrfs_alloc_page_array(unsigned int nr_pages, struct page **page_array) * though alloc_pages_bulk_array() falls back to alloc_page() * if it could not bulk-allocate. So we must be out of memory. */ - if (allocated == last) + if (allocated == last) { + for (int i = 0; i < allocated; i++) { + __free_page(page_array[i]); + page_array[i] = NULL; + } return -ENOMEM; + } memalloc_retry_wait(GFP_NOFS); } -- cgit v1.2.3 From 0ac1d13a55eb37d398b63e6ff6db4a09a2c9128c Mon Sep 17 00:00:00 2001 From: Jann Horn Date: Fri, 24 Nov 2023 17:48:31 +0100 Subject: btrfs: send: ensure send_fd is writable kernel_write() requires the caller to ensure that the file is writable. Let's do that directly after looking up the ->send_fd. We don't need a separate bailout path because the "out" path already does fput() if ->send_filp is non-NULL. This has no security impact for two reasons: - the ioctl requires CAP_SYS_ADMIN - __kernel_write() bails out on read-only files - but only since 5.8, see commit a01ac27be472 ("fs: check FMODE_WRITE in __kernel_write") Reported-and-tested-by: syzbot+12e098239d20385264d3@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=12e098239d20385264d3 Fixes: 31db9f7c23fb ("Btrfs: introduce BTRFS_IOC_SEND for btrfs send/receive") CC: stable@vger.kernel.org # 4.14+ Signed-off-by: Jann Horn Reviewed-by: David Sterba Signed-off-by: David Sterba --- fs/btrfs/send.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/btrfs/send.c b/fs/btrfs/send.c index 3b929f0e8f04..4e36550618e5 100644 --- a/fs/btrfs/send.c +++ b/fs/btrfs/send.c @@ -8158,7 +8158,7 @@ long btrfs_ioctl_send(struct inode *inode, struct btrfs_ioctl_send_args *arg) } sctx->send_filp = fget(arg->send_fd); - if (!sctx->send_filp) { + if (!sctx->send_filp || !(sctx->send_filp->f_mode & FMODE_WRITE)) { ret = -EBADF; goto out; } -- cgit v1.2.3 From 39d5b6a64ace77d0c11c398d272218df5f939abb Mon Sep 17 00:00:00 2001 From: Liu Ying Date: Thu, 23 Nov 2023 11:26:15 +0800 Subject: drm/bridge: panel: Check device dependency before managing device link Some panel devices already depend on DRM device, like the panel in arch/arm/boot/dts/st/ste-ux500-samsung-skomer.dts, because DRM device is the ancestor of those panel devices. device_link_add() would fail by returning a NULL pointer for those panel devices because of the existing dependency. So, check the dependency by calling device_is_dependent() before adding or deleting device link between panel device and DRM device so that the link is managed only for independent panel devices. Fixes: 887878014534 ("drm/bridge: panel: Fix device link for DRM_BRIDGE_ATTACH_NO_CONNECTOR") Fixes: 199cf07ebd2b ("drm/bridge: panel: Add a device link between drm device and panel device") Reported-by: Linus Walleij Closes: https://lore.kernel.org/lkml/CACRpkdaGzXD6HbiX7mVUNJAJtMEPG00Pp6+nJ1P0JrfJ-ArMvQ@mail.gmail.com/T/ Tested-by: Linus Walleij Signed-off-by: Liu Ying Signed-off-by: Linus Walleij Link: https://patchwork.freedesktop.org/patch/msgid/20231123032615.3760488-1-victor.liu@nxp.com --- drivers/gpu/drm/bridge/panel.c | 27 ++++++++++++++++++--------- 1 file changed, 18 insertions(+), 9 deletions(-) diff --git a/drivers/gpu/drm/bridge/panel.c b/drivers/gpu/drm/bridge/panel.c index e48823a4f1ed..5e8980023407 100644 --- a/drivers/gpu/drm/bridge/panel.c +++ b/drivers/gpu/drm/bridge/panel.c @@ -23,6 +23,7 @@ struct panel_bridge { struct drm_panel *panel; struct device_link *link; u32 connector_type; + bool is_independent; }; static inline struct panel_bridge * @@ -67,12 +68,17 @@ static int panel_bridge_attach(struct drm_bridge *bridge, struct drm_device *drm_dev = bridge->dev; int ret; - panel_bridge->link = device_link_add(drm_dev->dev, panel->dev, - DL_FLAG_STATELESS); - if (!panel_bridge->link) { - DRM_ERROR("Failed to add device link between %s and %s\n", - dev_name(drm_dev->dev), dev_name(panel->dev)); - return -EINVAL; + panel_bridge->is_independent = !device_is_dependent(drm_dev->dev, + panel->dev); + + if (panel_bridge->is_independent) { + panel_bridge->link = device_link_add(drm_dev->dev, panel->dev, + DL_FLAG_STATELESS); + if (!panel_bridge->link) { + DRM_ERROR("Failed to add device link between %s and %s\n", + dev_name(drm_dev->dev), dev_name(panel->dev)); + return -EINVAL; + } } if (flags & DRM_BRIDGE_ATTACH_NO_CONNECTOR) @@ -80,7 +86,8 @@ static int panel_bridge_attach(struct drm_bridge *bridge, if (!bridge->encoder) { DRM_ERROR("Missing encoder\n"); - device_link_del(panel_bridge->link); + if (panel_bridge->is_independent) + device_link_del(panel_bridge->link); return -ENODEV; } @@ -92,7 +99,8 @@ static int panel_bridge_attach(struct drm_bridge *bridge, panel_bridge->connector_type); if (ret) { DRM_ERROR("Failed to initialize connector\n"); - device_link_del(panel_bridge->link); + if (panel_bridge->is_independent) + device_link_del(panel_bridge->link); return ret; } @@ -115,7 +123,8 @@ static void panel_bridge_detach(struct drm_bridge *bridge) struct panel_bridge *panel_bridge = drm_bridge_to_panel_bridge(bridge); struct drm_connector *connector = &panel_bridge->connector; - device_link_del(panel_bridge->link); + if (panel_bridge->is_independent) + device_link_del(panel_bridge->link); /* * Cleanup the connector if we know it was initialized. -- cgit v1.2.3 From 93e6c0e19d5bb12b49534a411c85e21d333731fa Mon Sep 17 00:00:00 2001 From: Peter Wang Date: Wed, 15 Nov 2023 21:10:24 +0800 Subject: scsi: ufs: core: Clear cmd if abort succeeds in MCQ mode In MCQ mode, if cmd is pending in device and abort succeeds, response will not be returned by device. So we need clear the cmd, otherwise timeout will happen and next time we use same tag we will get a WARN_ON(lrbp->cmd). Below is error log: <3>[ 2277.447611][T21376] ufshcd-mtk 112b0000.ufshci: ufshcd_try_to_abort_task: cmd pending in the device. tag = 7 <3>[ 2277.476954][T21376] ufshcd-mtk 112b0000.ufshci: Aborting tag 7 / CDB 0x2a succeeded <6>[ 2307.551263][T30974] ufshcd-mtk 112b0000.ufshci: ufshcd_abort: Device abort task at tag 7 <4>[ 2307.623264][ T327] WARNING: CPU: 5 PID: 327 at source/drivers/ufs/core/ufshcd.c:3021 ufshcd_queuecommand+0x66c/0xe34 Fixes: ab248643d3d6 ("scsi: ufs: core: Add error handling for MCQ mode") Cc: Signed-off-by: Peter Wang Link: https://lore.kernel.org/r/20231115131024.15829-1-peter.wang@mediatek.com Reviewed-by: Bart Van Assche Signed-off-by: Martin K. Petersen --- drivers/ufs/core/ufshcd.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/drivers/ufs/core/ufshcd.c b/drivers/ufs/core/ufshcd.c index 8b1031fb0a44..bce0d2a9a7f3 100644 --- a/drivers/ufs/core/ufshcd.c +++ b/drivers/ufs/core/ufshcd.c @@ -6444,11 +6444,24 @@ static bool ufshcd_abort_one(struct request *rq, void *priv) struct scsi_device *sdev = cmd->device; struct Scsi_Host *shost = sdev->host; struct ufs_hba *hba = shost_priv(shost); + struct ufshcd_lrb *lrbp = &hba->lrb[tag]; + struct ufs_hw_queue *hwq; + unsigned long flags; *ret = ufshcd_try_to_abort_task(hba, tag); dev_err(hba->dev, "Aborting tag %d / CDB %#02x %s\n", tag, hba->lrb[tag].cmd ? hba->lrb[tag].cmd->cmnd[0] : -1, *ret ? "failed" : "succeeded"); + + /* Release cmd in MCQ mode if abort succeeds */ + if (is_mcq_enabled(hba) && (*ret == 0)) { + hwq = ufshcd_mcq_req_to_hwq(hba, scsi_cmd_to_rq(lrbp->cmd)); + spin_lock_irqsave(&hwq->cq_lock, flags); + if (ufshcd_cmd_inflight(lrbp->cmd)) + ufshcd_release_scsi_cmd(hba, lrbp); + spin_unlock_irqrestore(&hwq->cq_lock, flags); + } + return *ret == 0; } -- cgit v1.2.3 From 6371be7aeb986905bb60ec73d002fc02343393b4 Mon Sep 17 00:00:00 2001 From: Damien Le Moal Date: Tue, 21 Nov 2023 07:56:30 +0900 Subject: scsi: Change SCSI device boolean fields to single bit flags Commit 3cc2ffe5c16d ("scsi: sd: Differentiate system and runtime start/stop management") changed the single bit manage_start_stop flag into 2 boolean fields of the SCSI device structure. Commit 24eca2dce0f8 ("scsi: sd: Introduce manage_shutdown device flag") introduced the manage_shutdown boolean field for the same structure. Together, these 2 commits increase the size of struct scsi_device by 8 bytes by using booleans instead of defining the manage_xxx fields as single bit flags, similarly to other flags of this structure. Avoid this unnecessary structure size increase and be consistent with the definition of other flags by reverting the definitions of the manage_xxx fields as single bit flags. Fixes: 3cc2ffe5c16d ("scsi: sd: Differentiate system and runtime start/stop management") Fixes: 24eca2dce0f8 ("scsi: sd: Introduce manage_shutdown device flag") Cc: Signed-off-by: Damien Le Moal Link: https://lore.kernel.org/r/20231120225631.37938-2-dlemoal@kernel.org Reviewed-by: Niklas Cassel Signed-off-by: Martin K. Petersen --- drivers/ata/libata-scsi.c | 4 ++-- drivers/firewire/sbp2.c | 6 +++--- include/scsi/scsi_device.h | 6 +++--- 3 files changed, 8 insertions(+), 8 deletions(-) diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index c10ff8985203..63317449f6ea 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -1056,8 +1056,8 @@ int ata_scsi_dev_config(struct scsi_device *sdev, struct ata_device *dev) * and resume and shutdown only. For system level suspend/resume, * devices power state is handled directly by libata EH. */ - sdev->manage_runtime_start_stop = true; - sdev->manage_shutdown = true; + sdev->manage_runtime_start_stop = 1; + sdev->manage_shutdown = 1; } /* diff --git a/drivers/firewire/sbp2.c b/drivers/firewire/sbp2.c index 7edf2c95282f..e779d866022b 100644 --- a/drivers/firewire/sbp2.c +++ b/drivers/firewire/sbp2.c @@ -1519,9 +1519,9 @@ static int sbp2_scsi_slave_configure(struct scsi_device *sdev) sdev->use_10_for_rw = 1; if (sbp2_param_exclusive_login) { - sdev->manage_system_start_stop = true; - sdev->manage_runtime_start_stop = true; - sdev->manage_shutdown = true; + sdev->manage_system_start_stop = 1; + sdev->manage_runtime_start_stop = 1; + sdev->manage_shutdown = 1; } if (sdev->type == TYPE_ROM) diff --git a/include/scsi/scsi_device.h b/include/scsi/scsi_device.h index 10480eb582b2..1fb460dfca0c 100644 --- a/include/scsi/scsi_device.h +++ b/include/scsi/scsi_device.h @@ -167,19 +167,19 @@ struct scsi_device { * power state for system suspend/resume (suspend to RAM and * hibernation) operations. */ - bool manage_system_start_stop; + unsigned manage_system_start_stop:1; /* * If true, let the high-level device driver (sd) manage the device * power state for runtime device suspand and resume operations. */ - bool manage_runtime_start_stop; + unsigned manage_runtime_start_stop:1; /* * If true, let the high-level device driver (sd) manage the device * power state for system shutdown (power off) operations. */ - bool manage_shutdown; + unsigned manage_shutdown:1; unsigned removable:1; unsigned changed:1; /* Data invalid due to media change */ -- cgit v1.2.3 From b09d7f8fd50f6e93cbadd8d27fde178f745b42a1 Mon Sep 17 00:00:00 2001 From: Damien Le Moal Date: Tue, 21 Nov 2023 07:56:31 +0900 Subject: scsi: sd: Fix system start for ATA devices It is not always possible to keep a device in the runtime suspended state when a system level suspend/resume cycle is executed. E.g. for ATA devices connected to AHCI adapters, system resume resets the ATA ports, which causes connected devices to spin up. In such case, a runtime suspended disk will incorrectly be seen with a suspended runtime state because the device is not resumed by sd_resume_system(). The power state seen by the user is different than the actual device physical power state. Fix this issue by introducing the struct scsi_device flag force_runtime_start_on_system_start. When set, this flag causes sd_resume_system() to request a runtime resume operation for runtime suspended devices. This results in the user seeing the device runtime_state as active after a system resume, thus correctly reflecting the device physical power state. Fixes: 9131bff6a9f1 ("scsi: core: pm: Only runtime resume if necessary") Cc: Signed-off-by: Damien Le Moal Link: https://lore.kernel.org/r/20231120225631.37938-3-dlemoal@kernel.org Signed-off-by: Martin K. Petersen --- drivers/ata/libata-scsi.c | 5 +++++ drivers/scsi/sd.c | 9 ++++++++- include/scsi/scsi_device.h | 6 ++++++ 3 files changed, 19 insertions(+), 1 deletion(-) diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index 63317449f6ea..0a0f483124c3 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -1055,9 +1055,14 @@ int ata_scsi_dev_config(struct scsi_device *sdev, struct ata_device *dev) * Ask the sd driver to issue START STOP UNIT on runtime suspend * and resume and shutdown only. For system level suspend/resume, * devices power state is handled directly by libata EH. + * Given that disks are always spun up on system resume, also + * make sure that the sd driver forces runtime suspended disks + * to be resumed to correctly reflect the power state of the + * device. */ sdev->manage_runtime_start_stop = 1; sdev->manage_shutdown = 1; + sdev->force_runtime_start_on_system_start = 1; } /* diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c index fa00dd503cbf..542a4bbb21bc 100644 --- a/drivers/scsi/sd.c +++ b/drivers/scsi/sd.c @@ -3949,8 +3949,15 @@ static int sd_resume(struct device *dev, bool runtime) static int sd_resume_system(struct device *dev) { - if (pm_runtime_suspended(dev)) + if (pm_runtime_suspended(dev)) { + struct scsi_disk *sdkp = dev_get_drvdata(dev); + struct scsi_device *sdp = sdkp ? sdkp->device : NULL; + + if (sdp && sdp->force_runtime_start_on_system_start) + pm_request_resume(dev); + return 0; + } return sd_resume(dev, false); } diff --git a/include/scsi/scsi_device.h b/include/scsi/scsi_device.h index 1fb460dfca0c..5ec1e71a09de 100644 --- a/include/scsi/scsi_device.h +++ b/include/scsi/scsi_device.h @@ -181,6 +181,12 @@ struct scsi_device { */ unsigned manage_shutdown:1; + /* + * If set and if the device is runtime suspended, ask the high-level + * device driver (sd) to force a runtime resume of the device. + */ + unsigned force_runtime_start_on_system_start:1; + unsigned removable:1; unsigned changed:1; /* Data invalid due to media change */ unsigned busy:1; /* Used to prevent races */ -- cgit v1.2.3 From e11d4cccd094a7cd4696c8c42e672c76c092dad5 Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Mon, 20 Nov 2023 15:37:50 +0100 Subject: parisc: Mark ex_table entries 32-bit aligned in assembly.h Add an align statement to tell the linker that all ex_table entries and as such the whole ex_table section should be 32-bit aligned in vmlinux and modules. Signed-off-by: Helge Deller Cc: stable@vger.kernel.org # v6.0+ --- arch/parisc/include/asm/assembly.h | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/parisc/include/asm/assembly.h b/arch/parisc/include/asm/assembly.h index 75677b526b2b..74d17d7e759d 100644 --- a/arch/parisc/include/asm/assembly.h +++ b/arch/parisc/include/asm/assembly.h @@ -574,6 +574,7 @@ */ #define ASM_EXCEPTIONTABLE_ENTRY(fault_addr, except_addr) \ .section __ex_table,"aw" ! \ + .align 4 ! \ .word (fault_addr - .), (except_addr - .) ! \ .previous -- cgit v1.2.3 From a80aeb86542a50aa8521729ea4cc731ee7174f03 Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Mon, 20 Nov 2023 15:39:03 +0100 Subject: parisc: Mark ex_table entries 32-bit aligned in uaccess.h Add an align statement to tell the linker that all ex_table entries and as such the whole ex_table section should be 32-bit aligned in vmlinux and modules. Signed-off-by: Helge Deller Cc: stable@vger.kernel.org # v6.0+ --- arch/parisc/include/asm/uaccess.h | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/parisc/include/asm/uaccess.h b/arch/parisc/include/asm/uaccess.h index 2bf660eabe42..4165079898d9 100644 --- a/arch/parisc/include/asm/uaccess.h +++ b/arch/parisc/include/asm/uaccess.h @@ -41,6 +41,7 @@ struct exception_table_entry { #define ASM_EXCEPTIONTABLE_ENTRY( fault_addr, except_addr )\ ".section __ex_table,\"aw\"\n" \ + ".align 4\n" \ ".word (" #fault_addr " - .), (" #except_addr " - .)\n\t" \ ".previous\n" -- cgit v1.2.3 From 33f806da2df68606f77d7b892cd1298ba3d463e8 Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Mon, 20 Nov 2023 23:10:20 +0100 Subject: parisc: Mark altinstructions read-only and 32-bit aligned Signed-off-by: Helge Deller Cc: stable@vger.kernel.org # v6.0+ --- arch/parisc/include/asm/alternative.h | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/arch/parisc/include/asm/alternative.h b/arch/parisc/include/asm/alternative.h index 1ed45fd085d3..1eb488f25b83 100644 --- a/arch/parisc/include/asm/alternative.h +++ b/arch/parisc/include/asm/alternative.h @@ -34,7 +34,8 @@ void apply_alternatives(struct alt_instr *start, struct alt_instr *end, /* Alternative SMP implementation. */ #define ALTERNATIVE(cond, replacement) "!0:" \ - ".section .altinstructions, \"aw\" !" \ + ".section .altinstructions, \"a\" !" \ + ".align 4 !" \ ".word (0b-4-.) !" \ ".hword 1, " __stringify(cond) " !" \ ".word " __stringify(replacement) " !" \ @@ -44,7 +45,8 @@ void apply_alternatives(struct alt_instr *start, struct alt_instr *end, /* to replace one single instructions by a new instruction */ #define ALTERNATIVE(from, to, cond, replacement)\ - .section .altinstructions, "aw" ! \ + .section .altinstructions, "a" ! \ + .align 4 ! \ .word (from - .) ! \ .hword (to - from)/4, cond ! \ .word replacement ! \ @@ -52,7 +54,8 @@ void apply_alternatives(struct alt_instr *start, struct alt_instr *end, /* to replace multiple instructions by new code */ #define ALTERNATIVE_CODE(from, num_instructions, cond, new_instr_ptr)\ - .section .altinstructions, "aw" ! \ + .section .altinstructions, "a" ! \ + .align 4 ! \ .word (from - .) ! \ .hword -num_instructions, cond ! \ .word (new_instr_ptr - .) ! \ -- cgit v1.2.3 From 07eecff8ae78df7f28800484d31337e1f9bfca3a Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Mon, 20 Nov 2023 23:14:39 +0100 Subject: parisc: Mark jump_table naturally aligned The jump_table stores two 32-bit words and one 32- (on 32-bit kernel) or one 64-bit word (on 64-bit kernel). Ensure that the last word is always 64-bit aligned on a 64-bit kernel by aligning the whole structure on sizeof(long). Signed-off-by: Helge Deller Cc: stable@vger.kernel.org # v6.0+ --- arch/parisc/include/asm/jump_label.h | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/arch/parisc/include/asm/jump_label.h b/arch/parisc/include/asm/jump_label.h index af2a598bc0f8..94428798b6aa 100644 --- a/arch/parisc/include/asm/jump_label.h +++ b/arch/parisc/include/asm/jump_label.h @@ -15,10 +15,12 @@ static __always_inline bool arch_static_branch(struct static_key *key, bool bran asm_volatile_goto("1:\n\t" "nop\n\t" ".pushsection __jump_table, \"aw\"\n\t" + ".align %1\n\t" ".word 1b - ., %l[l_yes] - .\n\t" __stringify(ASM_ULONG_INSN) " %c0 - .\n\t" ".popsection\n\t" - : : "i" (&((char *)key)[branch]) : : l_yes); + : : "i" (&((char *)key)[branch]), "i" (sizeof(long)) + : : l_yes); return false; l_yes: @@ -30,10 +32,12 @@ static __always_inline bool arch_static_branch_jump(struct static_key *key, bool asm_volatile_goto("1:\n\t" "b,n %l[l_yes]\n\t" ".pushsection __jump_table, \"aw\"\n\t" + ".align %1\n\t" ".word 1b - ., %l[l_yes] - .\n\t" __stringify(ASM_ULONG_INSN) " %c0 - .\n\t" ".popsection\n\t" - : : "i" (&((char *)key)[branch]) : : l_yes); + : : "i" (&((char *)key)[branch]), "i" (sizeof(long)) + : : l_yes); return false; l_yes: -- cgit v1.2.3 From b28fc0d8739c03e7b6c44914a9d00d4c6dddc0ea Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Sat, 25 Nov 2023 09:11:56 +0100 Subject: parisc: Mark lock_aligned variables 16-byte aligned on SMP On parisc we need 16-byte alignment for variables which are used for locking. Mark the __lock_aligned attribute acordingly so that the .data..lock_aligned section will get that alignment in the generated object files. Signed-off-by: Helge Deller Cc: stable@vger.kernel.org # v6.0+ --- arch/parisc/include/asm/ldcw.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/parisc/include/asm/ldcw.h b/arch/parisc/include/asm/ldcw.h index ee9e071859b2..47ebc4c91eaf 100644 --- a/arch/parisc/include/asm/ldcw.h +++ b/arch/parisc/include/asm/ldcw.h @@ -55,7 +55,7 @@ }) #ifdef CONFIG_SMP -# define __lock_aligned __section(".data..lock_aligned") +# define __lock_aligned __section(".data..lock_aligned") __aligned(16) #endif #endif /* __PARISC_LDCW_H */ -- cgit v1.2.3 From c9fcb2b65c2849e8ff3be23fd8828312fb68dc19 Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Sat, 25 Nov 2023 09:16:02 +0100 Subject: parisc: Ensure 32-bit alignment on parisc unwind section Make sure the .PARISC.unwind section will be 32-bit aligned. Signed-off-by: Helge Deller Cc: stable@vger.kernel.org # v6.0+ --- arch/parisc/kernel/vmlinux.lds.S | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/parisc/kernel/vmlinux.lds.S b/arch/parisc/kernel/vmlinux.lds.S index 58694d1989c2..548051b0b4af 100644 --- a/arch/parisc/kernel/vmlinux.lds.S +++ b/arch/parisc/kernel/vmlinux.lds.S @@ -130,6 +130,7 @@ SECTIONS RO_DATA(8) /* unwind info */ + . = ALIGN(4); .PARISC.unwind : { __start___unwind = .; *(.PARISC.unwind) -- cgit v1.2.3 From fe76a1349f235969381832c83d703bc911021eb6 Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Mon, 20 Nov 2023 23:30:49 +0100 Subject: parisc: Use natural CPU alignment for bug_table Make sure that the __bug_table section gets 32- or 64-bit aligned, depending if a 32- or 64-bit kernel is being built. Mark it non-writeable and use .blockz instead of the .org assembler directive to pad the struct. Signed-off-by: Helge Deller Cc: stable@vger.kernel.org # v6.0+ --- arch/parisc/include/asm/bug.h | 30 ++++++++++++++++++------------ 1 file changed, 18 insertions(+), 12 deletions(-) diff --git a/arch/parisc/include/asm/bug.h b/arch/parisc/include/asm/bug.h index 4b6d60b94124..b9cad0bb4461 100644 --- a/arch/parisc/include/asm/bug.h +++ b/arch/parisc/include/asm/bug.h @@ -28,13 +28,15 @@ do { \ asm volatile("\n" \ "1:\t" PARISC_BUG_BREAK_ASM "\n" \ - "\t.pushsection __bug_table,\"aw\"\n" \ + "\t.pushsection __bug_table,\"a\"\n" \ + "\t.align %4\n" \ "2:\t" ASM_WORD_INSN "1b, %c0\n" \ - "\t.short %c1, %c2\n" \ - "\t.org 2b+%c3\n" \ + "\t.short %1, %2\n" \ + "\t.blockz %3-2*%4-2*2\n" \ "\t.popsection" \ : : "i" (__FILE__), "i" (__LINE__), \ - "i" (0), "i" (sizeof(struct bug_entry)) ); \ + "i" (0), "i" (sizeof(struct bug_entry)), \ + "i" (sizeof(long)) ); \ unreachable(); \ } while(0) @@ -51,27 +53,31 @@ do { \ asm volatile("\n" \ "1:\t" PARISC_BUG_BREAK_ASM "\n" \ - "\t.pushsection __bug_table,\"aw\"\n" \ + "\t.pushsection __bug_table,\"a\"\n" \ + "\t.align %4\n" \ "2:\t" ASM_WORD_INSN "1b, %c0\n" \ - "\t.short %c1, %c2\n" \ - "\t.org 2b+%c3\n" \ + "\t.short %1, %2\n" \ + "\t.blockz %3-2*%4-2*2\n" \ "\t.popsection" \ : : "i" (__FILE__), "i" (__LINE__), \ "i" (BUGFLAG_WARNING|(flags)), \ - "i" (sizeof(struct bug_entry)) ); \ + "i" (sizeof(struct bug_entry)), \ + "i" (sizeof(long)) ); \ } while(0) #else #define __WARN_FLAGS(flags) \ do { \ asm volatile("\n" \ "1:\t" PARISC_BUG_BREAK_ASM "\n" \ - "\t.pushsection __bug_table,\"aw\"\n" \ + "\t.pushsection __bug_table,\"a\"\n" \ + "\t.align %2\n" \ "2:\t" ASM_WORD_INSN "1b\n" \ - "\t.short %c0\n" \ - "\t.org 2b+%c1\n" \ + "\t.short %0\n" \ + "\t.blockz %1-%2-2\n" \ "\t.popsection" \ : : "i" (BUGFLAG_WARNING|(flags)), \ - "i" (sizeof(struct bug_entry)) ); \ + "i" (sizeof(struct bug_entry)), \ + "i" (sizeof(long)) ); \ } while(0) #endif -- cgit v1.2.3 From e5f3e299a2b1e9c3ece24a38adfc089aef307e8a Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Thu, 23 Nov 2023 20:28:27 +0100 Subject: parisc: Drop the HP-UX ENOSYM and EREMOTERELEASE error codes Those return codes are only defined for the parisc architecture and are leftovers from when we wanted to be HP-UX compatible. They are not returned by any Linux kernel syscall but do trigger problems with the glibc strerrorname_np() and strerror() functions as reported in glibc issue #31080. There is no need to keep them, so simply remove them. Signed-off-by: Helge Deller Reported-by: Bruno Haible Closes: https://sourceware.org/bugzilla/show_bug.cgi?id=31080 Cc: stable@vger.kernel.org --- arch/parisc/include/uapi/asm/errno.h | 2 -- lib/errname.c | 6 ------ tools/arch/parisc/include/uapi/asm/errno.h | 2 -- 3 files changed, 10 deletions(-) diff --git a/arch/parisc/include/uapi/asm/errno.h b/arch/parisc/include/uapi/asm/errno.h index 87245c584784..8d94739d75c6 100644 --- a/arch/parisc/include/uapi/asm/errno.h +++ b/arch/parisc/include/uapi/asm/errno.h @@ -75,7 +75,6 @@ /* We now return you to your regularly scheduled HPUX. */ -#define ENOSYM 215 /* symbol does not exist in executable */ #define ENOTSOCK 216 /* Socket operation on non-socket */ #define EDESTADDRREQ 217 /* Destination address required */ #define EMSGSIZE 218 /* Message too long */ @@ -101,7 +100,6 @@ #define ETIMEDOUT 238 /* Connection timed out */ #define ECONNREFUSED 239 /* Connection refused */ #define EREFUSED ECONNREFUSED /* for HP's NFS apparently */ -#define EREMOTERELEASE 240 /* Remote peer released connection */ #define EHOSTDOWN 241 /* Host is down */ #define EHOSTUNREACH 242 /* No route to host */ diff --git a/lib/errname.c b/lib/errname.c index dd1b998552cd..4f9112b38f3a 100644 --- a/lib/errname.c +++ b/lib/errname.c @@ -111,9 +111,6 @@ static const char *names_0[] = { E(ENOSPC), E(ENOSR), E(ENOSTR), -#ifdef ENOSYM - E(ENOSYM), -#endif E(ENOSYS), E(ENOTBLK), E(ENOTCONN), @@ -144,9 +141,6 @@ static const char *names_0[] = { #endif E(EREMOTE), E(EREMOTEIO), -#ifdef EREMOTERELEASE - E(EREMOTERELEASE), -#endif E(ERESTART), E(ERFKILL), E(EROFS), diff --git a/tools/arch/parisc/include/uapi/asm/errno.h b/tools/arch/parisc/include/uapi/asm/errno.h index 87245c584784..8d94739d75c6 100644 --- a/tools/arch/parisc/include/uapi/asm/errno.h +++ b/tools/arch/parisc/include/uapi/asm/errno.h @@ -75,7 +75,6 @@ /* We now return you to your regularly scheduled HPUX. */ -#define ENOSYM 215 /* symbol does not exist in executable */ #define ENOTSOCK 216 /* Socket operation on non-socket */ #define EDESTADDRREQ 217 /* Destination address required */ #define EMSGSIZE 218 /* Message too long */ @@ -101,7 +100,6 @@ #define ETIMEDOUT 238 /* Connection timed out */ #define ECONNREFUSED 239 /* Connection refused */ #define EREFUSED ECONNREFUSED /* for HP's NFS apparently */ -#define EREMOTERELEASE 240 /* Remote peer released connection */ #define EHOSTDOWN 241 /* Host is down */ #define EHOSTUNREACH 242 /* No route to host */ -- cgit v1.2.3 From 43266838515d30dc0c45d5c7e6e7edacee6cce92 Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Thu, 23 Nov 2023 21:57:19 +0100 Subject: parisc: Reduce size of the bug_table on 64-bit kernel by half Enable GENERIC_BUG_RELATIVE_POINTERS which will store 32-bit relative offsets to the bug address and the source file name instead of 64-bit absolute addresses. This effectively reduces the size of the bug_table[] array by half on 64-bit kernels. Signed-off-by: Helge Deller --- arch/parisc/Kconfig | 7 +++++-- arch/parisc/include/asm/bug.h | 34 +++++++++++++++++----------------- 2 files changed, 22 insertions(+), 19 deletions(-) diff --git a/arch/parisc/Kconfig b/arch/parisc/Kconfig index a7c9c0e69e5a..d14ccc948a29 100644 --- a/arch/parisc/Kconfig +++ b/arch/parisc/Kconfig @@ -115,9 +115,12 @@ config ARCH_HAS_ILOG2_U64 default n config GENERIC_BUG - bool - default y + def_bool y depends on BUG + select GENERIC_BUG_RELATIVE_POINTERS if 64BIT + +config GENERIC_BUG_RELATIVE_POINTERS + bool config GENERIC_HWEIGHT bool diff --git a/arch/parisc/include/asm/bug.h b/arch/parisc/include/asm/bug.h index b9cad0bb4461..1641ff9a8b83 100644 --- a/arch/parisc/include/asm/bug.h +++ b/arch/parisc/include/asm/bug.h @@ -17,26 +17,27 @@ #define PARISC_BUG_BREAK_ASM "break 0x1f, 0x1fff" #define PARISC_BUG_BREAK_INSN 0x03ffe01f /* PARISC_BUG_BREAK_ASM */ -#if defined(CONFIG_64BIT) -#define ASM_WORD_INSN ".dword\t" +#ifdef CONFIG_GENERIC_BUG_RELATIVE_POINTERS +# define __BUG_REL(val) ".word " __stringify(val) " - ." #else -#define ASM_WORD_INSN ".word\t" +# define __BUG_REL(val) ".word " __stringify(val) #endif + #ifdef CONFIG_DEBUG_BUGVERBOSE #define BUG() \ do { \ asm volatile("\n" \ "1:\t" PARISC_BUG_BREAK_ASM "\n" \ "\t.pushsection __bug_table,\"a\"\n" \ - "\t.align %4\n" \ - "2:\t" ASM_WORD_INSN "1b, %c0\n" \ + "\t.align 4\n" \ + "2:\t" __BUG_REL(1b) "\n" \ + "\t" __BUG_REL(%c0) "\n" \ "\t.short %1, %2\n" \ - "\t.blockz %3-2*%4-2*2\n" \ + "\t.blockz %3-2*4-2*2\n" \ "\t.popsection" \ : : "i" (__FILE__), "i" (__LINE__), \ - "i" (0), "i" (sizeof(struct bug_entry)), \ - "i" (sizeof(long)) ); \ + "i" (0), "i" (sizeof(struct bug_entry)) ); \ unreachable(); \ } while(0) @@ -54,15 +55,15 @@ asm volatile("\n" \ "1:\t" PARISC_BUG_BREAK_ASM "\n" \ "\t.pushsection __bug_table,\"a\"\n" \ - "\t.align %4\n" \ - "2:\t" ASM_WORD_INSN "1b, %c0\n" \ + "\t.align 4\n" \ + "2:\t" __BUG_REL(1b) "\n" \ + "\t" __BUG_REL(%c0) "\n" \ "\t.short %1, %2\n" \ - "\t.blockz %3-2*%4-2*2\n" \ + "\t.blockz %3-2*4-2*2\n" \ "\t.popsection" \ : : "i" (__FILE__), "i" (__LINE__), \ "i" (BUGFLAG_WARNING|(flags)), \ - "i" (sizeof(struct bug_entry)), \ - "i" (sizeof(long)) ); \ + "i" (sizeof(struct bug_entry)) ); \ } while(0) #else #define __WARN_FLAGS(flags) \ @@ -71,13 +72,12 @@ "1:\t" PARISC_BUG_BREAK_ASM "\n" \ "\t.pushsection __bug_table,\"a\"\n" \ "\t.align %2\n" \ - "2:\t" ASM_WORD_INSN "1b\n" \ + "2:\t" __BUG_REL(1b) "\n" \ "\t.short %0\n" \ - "\t.blockz %1-%2-2\n" \ + "\t.blockz %1-4-2\n" \ "\t.popsection" \ : : "i" (BUGFLAG_WARNING|(flags)), \ - "i" (sizeof(struct bug_entry)), \ - "i" (sizeof(long)) ); \ + "i" (sizeof(struct bug_entry)) ); \ } while(0) #endif -- cgit v1.2.3 From f83d38def6b1b00c9bb17173837045b41df7e7d7 Mon Sep 17 00:00:00 2001 From: Chancel Liu Date: Sat, 25 Nov 2023 14:53:00 +0800 Subject: ASoC: imx-rpmsg: SND_SOC_IMX_RPMSG should depend on OF and I2C SND_SOC_IMX_RPMSG should depend on OF and I2C. It fixes the following error reported by kernel test robot: ld: sound/soc/fsl/imx-rpmsg.o: in function `imx_rpmsg_late_probe': imx-rpmsg.c:(.text+0x4f): undefined reference to `i2c_find_device_by_fwnode' Fixes: 5d9f746ca64c ("ASoC: imx-rpmsg: Force codec power on in low power audio mode") Reported-by: kernel test robot Closes: https://lore.kernel.org/oe-kbuild-all/202311230506.DPF9vvYY-lkp@intel.com/ Signed-off-by: Chancel Liu Link: https://lore.kernel.org/r/20231125065300.6385-1-chancel.liu@nxp.com Signed-off-by: Mark Brown --- sound/soc/fsl/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/soc/fsl/Kconfig b/sound/soc/fsl/Kconfig index 725c530a3636..be342ee03fb9 100644 --- a/sound/soc/fsl/Kconfig +++ b/sound/soc/fsl/Kconfig @@ -360,6 +360,7 @@ config SND_SOC_IMX_HDMI config SND_SOC_IMX_RPMSG tristate "SoC Audio support for i.MX boards with rpmsg" depends on RPMSG + depends on OF && I2C select SND_SOC_IMX_PCM_RPMSG select SND_SOC_IMX_AUDIO_RPMSG help -- cgit v1.2.3 From fe4c5f662097978b6c91c23a13c24ed92339a180 Mon Sep 17 00:00:00 2001 From: "Jason-JH.Lin" Date: Wed, 20 Sep 2023 17:06:58 +0800 Subject: drm/mediatek: Add spinlock for setting vblank event in atomic_begin Add spinlock protection to avoid race condition on vblank event between mtk_drm_crtc_atomic_begin() and mtk_drm_finish_page_flip(). Fixes: 119f5173628a ("drm/mediatek: Add DRM Driver for Mediatek SoC MT8173.") Signed-off-by: Jason-JH.Lin Suggested-by: AngeloGioacchino Del Regno Reviewed-by: Alexandre Mergnat Reviewed-by: Fei Shao Tested-by: Fei Shao Reviewed-by: AngeloGioacchino Del Regno Reviewed-by: CK Hu Link: https://patchwork.kernel.org/project/dri-devel/patch/20230920090658.31181-1-jason-jh.lin@mediatek.com/ Signed-off-by: Chun-Kuang Hu --- drivers/gpu/drm/mediatek/mtk_drm_crtc.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c index c277b9fae950..0a7d60c191b8 100644 --- a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c +++ b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c @@ -788,6 +788,7 @@ static void mtk_drm_crtc_atomic_begin(struct drm_crtc *crtc, crtc); struct mtk_crtc_state *mtk_crtc_state = to_mtk_crtc_state(crtc_state); struct mtk_drm_crtc *mtk_crtc = to_mtk_crtc(crtc); + unsigned long flags; if (mtk_crtc->event && mtk_crtc_state->base.event) DRM_ERROR("new event while there is still a pending event\n"); @@ -795,7 +796,11 @@ static void mtk_drm_crtc_atomic_begin(struct drm_crtc *crtc, if (mtk_crtc_state->base.event) { mtk_crtc_state->base.event->pipe = drm_crtc_index(crtc); WARN_ON(drm_crtc_vblank_get(crtc) != 0); + + spin_lock_irqsave(&crtc->dev->event_lock, flags); mtk_crtc->event = mtk_crtc_state->base.event; + spin_unlock_irqrestore(&crtc->dev->event_lock, flags); + mtk_crtc_state->base.event = NULL; } } -- cgit v1.2.3 From 7d9f8468ff7589073981b3eb8b175945c7dcd13c Mon Sep 17 00:00:00 2001 From: Kent Overstreet Date: Fri, 24 Nov 2023 21:51:45 -0500 Subject: bcachefs: Data update path won't accidentaly grow replicas Previously, there was a bug where if an extent had greater durability than required (because we needed to move a durability=1 pointer and ended up putting it on a durability 2 device), we would submit a write for replicas=2 - the durability of the pointer being rewritten - instead of the number of replicas required to bring it back up to the data_replicas option. This, plus the allocation path sometimes allocating on a greater durability device than requested, meant that extents could continue having more and more replicas added as they were being rewritten. Signed-off-by: Kent Overstreet --- fs/bcachefs/data_update.c | 92 +++++++++++++++++++++++++++++++++++++++++------ fs/bcachefs/data_update.h | 9 +++-- fs/bcachefs/errcode.h | 2 +- fs/bcachefs/io_read.c | 2 +- fs/bcachefs/move.c | 58 +++--------------------------- 5 files changed, 96 insertions(+), 67 deletions(-) diff --git a/fs/bcachefs/data_update.c b/fs/bcachefs/data_update.c index 5ed66202c226..71aa5e59787b 100644 --- a/fs/bcachefs/data_update.c +++ b/fs/bcachefs/data_update.c @@ -356,7 +356,7 @@ void bch2_data_update_exit(struct data_update *update) bch2_bio_free_pages_pool(c, &update->op.wbio.bio); } -void bch2_update_unwritten_extent(struct btree_trans *trans, +static void bch2_update_unwritten_extent(struct btree_trans *trans, struct data_update *update) { struct bch_fs *c = update->op.c; @@ -436,7 +436,51 @@ void bch2_update_unwritten_extent(struct btree_trans *trans, } } +int bch2_extent_drop_ptrs(struct btree_trans *trans, + struct btree_iter *iter, + struct bkey_s_c k, + struct data_update_opts data_opts) +{ + struct bch_fs *c = trans->c; + struct bkey_i *n; + int ret; + + n = bch2_bkey_make_mut_noupdate(trans, k); + ret = PTR_ERR_OR_ZERO(n); + if (ret) + return ret; + + while (data_opts.kill_ptrs) { + unsigned i = 0, drop = __fls(data_opts.kill_ptrs); + struct bch_extent_ptr *ptr; + + bch2_bkey_drop_ptrs(bkey_i_to_s(n), ptr, i++ == drop); + data_opts.kill_ptrs ^= 1U << drop; + } + + /* + * If the new extent no longer has any pointers, bch2_extent_normalize() + * will do the appropriate thing with it (turning it into a + * KEY_TYPE_error key, or just a discard if it was a cached extent) + */ + bch2_extent_normalize(c, bkey_i_to_s(n)); + + /* + * Since we're not inserting through an extent iterator + * (BTREE_ITER_ALL_SNAPSHOTS iterators aren't extent iterators), + * we aren't using the extent overwrite path to delete, we're + * just using the normal key deletion path: + */ + if (bkey_deleted(&n->k)) + n->k.size = 0; + + return bch2_trans_relock(trans) ?: + bch2_trans_update(trans, iter, n, BTREE_UPDATE_INTERNAL_SNAPSHOT_NODE) ?: + bch2_trans_commit(trans, NULL, NULL, BTREE_INSERT_NOFAIL); +} + int bch2_data_update_init(struct btree_trans *trans, + struct btree_iter *iter, struct moving_context *ctxt, struct data_update *m, struct write_point_specifier wp, @@ -452,7 +496,7 @@ int bch2_data_update_init(struct btree_trans *trans, const struct bch_extent_ptr *ptr; unsigned i, reserve_sectors = k.k->size * data_opts.extra_replicas; unsigned ptrs_locked = 0; - int ret; + int ret = 0; bch2_bkey_buf_init(&m->k); bch2_bkey_buf_reassemble(&m->k, c, k); @@ -478,6 +522,8 @@ int bch2_data_update_init(struct btree_trans *trans, bkey_for_each_ptr(ptrs, ptr) percpu_ref_get(&bch_dev_bkey_exists(c, ptr->dev)->ref); + unsigned durability_have = 0, durability_removing = 0; + i = 0; bkey_for_each_ptr_decode(k.k, ptrs, p, entry) { bool locked; @@ -489,8 +535,11 @@ int bch2_data_update_init(struct btree_trans *trans, reserve_sectors += k.k->size; m->op.nr_replicas += bch2_extent_ptr_desired_durability(c, &p); - } else if (!p.ptr.cached) { + durability_removing += bch2_extent_ptr_desired_durability(c, &p); + } else if (!p.ptr.cached && + !((1U << i) & m->data_opts.kill_ptrs)) { bch2_dev_list_add_dev(&m->op.devs_have, p.ptr.dev); + durability_have += bch2_extent_ptr_durability(c, &p); } /* @@ -529,6 +578,29 @@ int bch2_data_update_init(struct btree_trans *trans, i++; } + /* + * If current extent durability is less than io_opts.data_replicas, + * we're not trying to rereplicate the extent up to data_replicas here - + * unless extra_replicas was specified + * + * Increasing replication is an explicit operation triggered by + * rereplicate, currently, so that users don't get an unexpected -ENOSPC + */ + if (durability_have >= io_opts.data_replicas) { + m->data_opts.kill_ptrs |= m->data_opts.rewrite_ptrs; + m->data_opts.rewrite_ptrs = 0; + /* if iter == NULL, it's just a promote */ + if (iter) + ret = bch2_extent_drop_ptrs(trans, iter, k, data_opts); + goto done; + } + + m->op.nr_replicas = min(durability_removing, io_opts.data_replicas - durability_have) + + m->data_opts.extra_replicas; + m->op.nr_replicas_required = m->op.nr_replicas; + + BUG_ON(!m->op.nr_replicas); + if (reserve_sectors) { ret = bch2_disk_reservation_add(c, &m->op.res, reserve_sectors, m->data_opts.extra_replicas @@ -538,14 +610,11 @@ int bch2_data_update_init(struct btree_trans *trans, goto err; } - m->op.nr_replicas += m->data_opts.extra_replicas; - m->op.nr_replicas_required = m->op.nr_replicas; - - BUG_ON(!m->op.nr_replicas); + if (bkey_extent_is_unwritten(k)) { + bch2_update_unwritten_extent(trans, m); + goto done; + } - /* Special handling required: */ - if (bkey_extent_is_unwritten(k)) - return -BCH_ERR_unwritten_extent_update; return 0; err: i = 0; @@ -560,6 +629,9 @@ err: bch2_bkey_buf_exit(&m->k, c); bch2_bio_free_pages_pool(c, &m->op.wbio.bio); return ret; +done: + bch2_data_update_exit(m); + return ret ?: -BCH_ERR_data_update_done; } void bch2_data_update_opts_normalize(struct bkey_s_c k, struct data_update_opts *opts) diff --git a/fs/bcachefs/data_update.h b/fs/bcachefs/data_update.h index 9dc17b9d8379..991095bbd469 100644 --- a/fs/bcachefs/data_update.h +++ b/fs/bcachefs/data_update.h @@ -32,9 +32,14 @@ int bch2_data_update_index_update(struct bch_write_op *); void bch2_data_update_read_done(struct data_update *, struct bch_extent_crc_unpacked); +int bch2_extent_drop_ptrs(struct btree_trans *, + struct btree_iter *, + struct bkey_s_c, + struct data_update_opts); + void bch2_data_update_exit(struct data_update *); -void bch2_update_unwritten_extent(struct btree_trans *, struct data_update *); -int bch2_data_update_init(struct btree_trans *, struct moving_context *, +int bch2_data_update_init(struct btree_trans *, struct btree_iter *, + struct moving_context *, struct data_update *, struct write_point_specifier, struct bch_io_opts, struct data_update_opts, diff --git a/fs/bcachefs/errcode.h b/fs/bcachefs/errcode.h index 68a1a96bb7ca..69b0627c2180 100644 --- a/fs/bcachefs/errcode.h +++ b/fs/bcachefs/errcode.h @@ -162,7 +162,7 @@ x(BCH_ERR_fsck, fsck_repair_unimplemented) \ x(BCH_ERR_fsck, fsck_repair_impossible) \ x(0, restart_recovery) \ - x(0, unwritten_extent_update) \ + x(0, data_update_done) \ x(EINVAL, device_state_not_allowed) \ x(EINVAL, member_info_missing) \ x(EINVAL, mismatched_block_size) \ diff --git a/fs/bcachefs/io_read.c b/fs/bcachefs/io_read.c index a56ed553dc15..36763865facd 100644 --- a/fs/bcachefs/io_read.c +++ b/fs/bcachefs/io_read.c @@ -209,7 +209,7 @@ static struct promote_op *__promote_alloc(struct btree_trans *trans, bio = &op->write.op.wbio.bio; bio_init(bio, NULL, bio->bi_inline_vecs, pages, 0); - ret = bch2_data_update_init(trans, NULL, &op->write, + ret = bch2_data_update_init(trans, NULL, NULL, &op->write, writepoint_hashed((unsigned long) current), opts, (struct data_update_opts) { diff --git a/fs/bcachefs/move.c b/fs/bcachefs/move.c index 71f865352816..3b0a501b6baf 100644 --- a/fs/bcachefs/move.c +++ b/fs/bcachefs/move.c @@ -229,49 +229,6 @@ void bch2_move_stats_init(struct bch_move_stats *stats, char *name) scnprintf(stats->name, sizeof(stats->name), "%s", name); } -static int bch2_extent_drop_ptrs(struct btree_trans *trans, - struct btree_iter *iter, - struct bkey_s_c k, - struct data_update_opts data_opts) -{ - struct bch_fs *c = trans->c; - struct bkey_i *n; - int ret; - - n = bch2_bkey_make_mut_noupdate(trans, k); - ret = PTR_ERR_OR_ZERO(n); - if (ret) - return ret; - - while (data_opts.kill_ptrs) { - unsigned i = 0, drop = __fls(data_opts.kill_ptrs); - struct bch_extent_ptr *ptr; - - bch2_bkey_drop_ptrs(bkey_i_to_s(n), ptr, i++ == drop); - data_opts.kill_ptrs ^= 1U << drop; - } - - /* - * If the new extent no longer has any pointers, bch2_extent_normalize() - * will do the appropriate thing with it (turning it into a - * KEY_TYPE_error key, or just a discard if it was a cached extent) - */ - bch2_extent_normalize(c, bkey_i_to_s(n)); - - /* - * Since we're not inserting through an extent iterator - * (BTREE_ITER_ALL_SNAPSHOTS iterators aren't extent iterators), - * we aren't using the extent overwrite path to delete, we're - * just using the normal key deletion path: - */ - if (bkey_deleted(&n->k)) - n->k.size = 0; - - return bch2_trans_relock(trans) ?: - bch2_trans_update(trans, iter, n, BTREE_UPDATE_INTERNAL_SNAPSHOT_NODE) ?: - bch2_trans_commit(trans, NULL, NULL, BTREE_INSERT_NOFAIL); -} - int bch2_move_extent(struct moving_context *ctxt, struct move_bucket_in_flight *bucket_in_flight, struct btree_iter *iter, @@ -341,19 +298,11 @@ int bch2_move_extent(struct moving_context *ctxt, io->rbio.bio.bi_iter.bi_sector = bkey_start_offset(k.k); io->rbio.bio.bi_end_io = move_read_endio; - ret = bch2_data_update_init(trans, ctxt, &io->write, ctxt->wp, + ret = bch2_data_update_init(trans, iter, ctxt, &io->write, ctxt->wp, io_opts, data_opts, iter->btree_id, k); - if (ret && ret != -BCH_ERR_unwritten_extent_update) + if (ret) goto err_free_pages; - if (ret == -BCH_ERR_unwritten_extent_update) { - bch2_update_unwritten_extent(trans, &io->write); - move_free(io); - return 0; - } - - BUG_ON(ret); - io->write.op.end_io = move_write_done; if (ctxt->rate) @@ -397,6 +346,9 @@ err_free_pages: err_free: kfree(io); err: + if (ret == -BCH_ERR_data_update_done) + return 0; + this_cpu_inc(c->counters[BCH_COUNTER_move_extent_alloc_mem_fail]); trace_move_extent_alloc_mem_fail2(c, k); return ret; -- cgit v1.2.3 From e4f72bb46a774b449ffe864fa6fffa7ecbf8f3f7 Mon Sep 17 00:00:00 2001 From: Kent Overstreet Date: Fri, 24 Nov 2023 21:52:06 -0500 Subject: bcachefs: Fix ec + durability calculation Durability of an erasure coded pointer doesn't add the device durability; durability is the same for any extent in that stripe so the calculation only comes from the stripe. Signed-off-by: Kent Overstreet --- fs/bcachefs/extents.c | 30 ++++++++++++------------------ 1 file changed, 12 insertions(+), 18 deletions(-) diff --git a/fs/bcachefs/extents.c b/fs/bcachefs/extents.c index a864de231b69..f6c92df55270 100644 --- a/fs/bcachefs/extents.c +++ b/fs/bcachefs/extents.c @@ -649,37 +649,31 @@ unsigned bch2_bkey_replicas(struct bch_fs *c, struct bkey_s_c k) return replicas; } -unsigned bch2_extent_ptr_desired_durability(struct bch_fs *c, struct extent_ptr_decoded *p) +static inline unsigned __extent_ptr_durability(struct bch_dev *ca, struct extent_ptr_decoded *p) { - struct bch_dev *ca; - if (p->ptr.cached) return 0; - ca = bch_dev_bkey_exists(c, p->ptr.dev); - - return ca->mi.durability + - (p->has_ec - ? p->ec.redundancy - : 0); + return p->has_ec + ? p->ec.redundancy + 1 + : ca->mi.durability; } -unsigned bch2_extent_ptr_durability(struct bch_fs *c, struct extent_ptr_decoded *p) +unsigned bch2_extent_ptr_desired_durability(struct bch_fs *c, struct extent_ptr_decoded *p) { - struct bch_dev *ca; + struct bch_dev *ca = bch_dev_bkey_exists(c, p->ptr.dev); - if (p->ptr.cached) - return 0; + return __extent_ptr_durability(ca, p); +} - ca = bch_dev_bkey_exists(c, p->ptr.dev); +unsigned bch2_extent_ptr_durability(struct bch_fs *c, struct extent_ptr_decoded *p) +{ + struct bch_dev *ca = bch_dev_bkey_exists(c, p->ptr.dev); if (ca->mi.state == BCH_MEMBER_STATE_failed) return 0; - return ca->mi.durability + - (p->has_ec - ? p->ec.redundancy - : 0); + return __extent_ptr_durability(ca, p); } unsigned bch2_bkey_durability(struct bch_fs *c, struct bkey_s_c k) -- cgit v1.2.3 From 3f3ae1250e739fb446639efad0ba916ba0a012f0 Mon Sep 17 00:00:00 2001 From: Kent Overstreet Date: Sat, 25 Nov 2023 12:16:22 -0500 Subject: bcachefs: bpos is misaligned on big endian bkey embeds a bpos that is misaligned on big endian; this is so that bch2_bkey_swab() works correctly without having to differentiate between packed and non-packed keys (a debatable design decision). This means it can't have the __aligned() tag on big endian. Signed-off-by: Kent Overstreet --- fs/bcachefs/bcachefs_format.h | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/fs/bcachefs/bcachefs_format.h b/fs/bcachefs/bcachefs_format.h index 0a750953ff92..ca0842f9b7e9 100644 --- a/fs/bcachefs/bcachefs_format.h +++ b/fs/bcachefs/bcachefs_format.h @@ -151,7 +151,11 @@ struct bpos { #else #error edit for your odd byteorder. #endif -} __packed __aligned(4); +} __packed +#if __BYTE_ORDER__ == __ORDER_LITTLE_ENDIAN__ +__aligned(4) +#endif +; #define KEY_INODE_MAX ((__u64)~0ULL) #define KEY_OFFSET_MAX ((__u64)~0ULL) -- cgit v1.2.3 From b3f1a164c7f742503dc7159011f7ad6b092b660e Mon Sep 17 00:00:00 2001 From: Greg Ungerer Date: Fri, 24 Nov 2023 14:15:28 +1000 Subject: net: dsa: mv88e6xxx: fix marvell 6350 switch probing As of commit de5c9bf40c45 ("net: phylink: require supported_interfaces to be filled") Marvell 88e6350 switches fail to be probed: ... mv88e6085 d0072004.mdio-mii:11: switch 0x3710 detected: Marvell 88E6350, revision 2 mv88e6085 d0072004.mdio-mii:11: phylink: error: empty supported_interfaces error creating PHYLINK: -22 mv88e6085: probe of d0072004.mdio-mii:11 failed with error -22 ... The problem stems from the use of mv88e6185_phylink_get_caps() to get the device capabilities. Create a new dedicated phylink_get_caps for the 6351 family (which the 6350 is one of) to properly support their set of capabilities. According to chip.h the 6351 switch family includes the 6171, 6175, 6350 and 6351 switches, so update each of these to use the correct phylink_get_caps. Fixes: de5c9bf40c45 ("net: phylink: require supported_interfaces to be filled") Signed-off-by: Greg Ungerer Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller --- drivers/net/dsa/mv88e6xxx/chip.c | 20 ++++++++++++++++---- 1 file changed, 16 insertions(+), 4 deletions(-) diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c index 42b1acaca33a..d8a67bf4e595 100644 --- a/drivers/net/dsa/mv88e6xxx/chip.c +++ b/drivers/net/dsa/mv88e6xxx/chip.c @@ -577,6 +577,18 @@ static void mv88e6250_phylink_get_caps(struct mv88e6xxx_chip *chip, int port, config->mac_capabilities = MAC_SYM_PAUSE | MAC_10 | MAC_100; } +static void mv88e6351_phylink_get_caps(struct mv88e6xxx_chip *chip, int port, + struct phylink_config *config) +{ + unsigned long *supported = config->supported_interfaces; + + /* Translate the default cmode */ + mv88e6xxx_translate_cmode(chip->ports[port].cmode, supported); + + config->mac_capabilities = MAC_SYM_PAUSE | MAC_10 | MAC_100 | + MAC_1000FD; +} + static int mv88e6352_get_port4_serdes_cmode(struct mv88e6xxx_chip *chip) { u16 reg, val; @@ -4340,7 +4352,7 @@ static const struct mv88e6xxx_ops mv88e6171_ops = { .vtu_loadpurge = mv88e6352_g1_vtu_loadpurge, .stu_getnext = mv88e6352_g1_stu_getnext, .stu_loadpurge = mv88e6352_g1_stu_loadpurge, - .phylink_get_caps = mv88e6185_phylink_get_caps, + .phylink_get_caps = mv88e6351_phylink_get_caps, }; static const struct mv88e6xxx_ops mv88e6172_ops = { @@ -4440,7 +4452,7 @@ static const struct mv88e6xxx_ops mv88e6175_ops = { .vtu_loadpurge = mv88e6352_g1_vtu_loadpurge, .stu_getnext = mv88e6352_g1_stu_getnext, .stu_loadpurge = mv88e6352_g1_stu_loadpurge, - .phylink_get_caps = mv88e6185_phylink_get_caps, + .phylink_get_caps = mv88e6351_phylink_get_caps, }; static const struct mv88e6xxx_ops mv88e6176_ops = { @@ -5069,7 +5081,7 @@ static const struct mv88e6xxx_ops mv88e6350_ops = { .vtu_loadpurge = mv88e6352_g1_vtu_loadpurge, .stu_getnext = mv88e6352_g1_stu_getnext, .stu_loadpurge = mv88e6352_g1_stu_loadpurge, - .phylink_get_caps = mv88e6185_phylink_get_caps, + .phylink_get_caps = mv88e6351_phylink_get_caps, }; static const struct mv88e6xxx_ops mv88e6351_ops = { @@ -5117,7 +5129,7 @@ static const struct mv88e6xxx_ops mv88e6351_ops = { .stu_loadpurge = mv88e6352_g1_stu_loadpurge, .avb_ops = &mv88e6352_avb_ops, .ptp_ops = &mv88e6352_ptp_ops, - .phylink_get_caps = mv88e6185_phylink_get_caps, + .phylink_get_caps = mv88e6351_phylink_get_caps, }; static const struct mv88e6xxx_ops mv88e6352_ops = { -- cgit v1.2.3 From a524eabcd72d28425d9db242cf375d0389d74eba Mon Sep 17 00:00:00 2001 From: Greg Ungerer Date: Fri, 24 Nov 2023 14:15:29 +1000 Subject: net: dsa: mv88e6xxx: fix marvell 6350 probe crash As of commit b92143d4420f ("net: dsa: mv88e6xxx: add infrastructure for phylink_pcs") probing of a Marvell 88e6350 switch causes a NULL pointer de-reference like this example: ... mv88e6085 d0072004.mdio-mii:11: switch 0x3710 detected: Marvell 88E6350, revision 2 8<--- cut here --- Unable to handle kernel NULL pointer dereference at virtual address 00000000 when read [00000000] *pgd=00000000 Internal error: Oops: 5 [#1] ARM Modules linked in: CPU: 0 PID: 8 Comm: kworker/u2:0 Not tainted 6.7.0-rc2-dirty #26 Hardware name: Marvell Armada 370/XP (Device Tree) Workqueue: events_unbound deferred_probe_work_func PC is at mv88e6xxx_port_setup+0x1c/0x44 LR is at dsa_port_devlink_setup+0x74/0x154 pc : [] lr : [] psr: a0000013 sp : c184fce0 ip : c542b8f4 fp : 00000000 r10: 00000001 r9 : c542a540 r8 : c542bc00 r7 : c542b838 r6 : c5244580 r5 : 00000005 r4 : c5244580 r3 : 00000000 r2 : c542b840 r1 : 00000005 r0 : c1a02040 ... The Marvell 6350 switch has no SERDES interface and so has no corresponding pcs_ops defined for it. But during probing a call is made to mv88e6xxx_port_setup() which unconditionally expects pcs_ops to exist - though the presence of the pcs_ops->pcs_init function is optional. Modify code to check for pcs_ops first, before checking for and calling pcs_ops->pcs_init. Modify checking and use of pcs_ops->pcs_teardown which may potentially suffer the same problem. Fixes: b92143d4420f ("net: dsa: mv88e6xxx: add infrastructure for phylink_pcs") Signed-off-by: Greg Ungerer Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller --- drivers/net/dsa/mv88e6xxx/chip.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c index d8a67bf4e595..07a22c74fe81 100644 --- a/drivers/net/dsa/mv88e6xxx/chip.c +++ b/drivers/net/dsa/mv88e6xxx/chip.c @@ -3892,7 +3892,8 @@ static int mv88e6xxx_port_setup(struct dsa_switch *ds, int port) struct mv88e6xxx_chip *chip = ds->priv; int err; - if (chip->info->ops->pcs_ops->pcs_init) { + if (chip->info->ops->pcs_ops && + chip->info->ops->pcs_ops->pcs_init) { err = chip->info->ops->pcs_ops->pcs_init(chip, port); if (err) return err; @@ -3907,7 +3908,8 @@ static void mv88e6xxx_port_teardown(struct dsa_switch *ds, int port) mv88e6xxx_teardown_devlink_regions_port(ds, port); - if (chip->info->ops->pcs_ops->pcs_teardown) + if (chip->info->ops->pcs_ops && + chip->info->ops->pcs_ops->pcs_teardown) chip->info->ops->pcs_ops->pcs_teardown(chip, port); } -- cgit v1.2.3 From 79997eda0d31bc68203c95ecb978773ee6ce7a1f Mon Sep 17 00:00:00 2001 From: Conor Dooley Date: Sun, 26 Nov 2023 11:40:54 +0000 Subject: riscv: dts: microchip: move timebase-frequency to mpfs.dtsi The timebase-frequency on PolarFire SoC is not set by an oscillator on the board, but rather by an internal divider, so move the property to mpfs.dtsi. This looks to be copy-pasta from the SiFive Unleashed as the comments in both places were almost identical. In the Unleashed's case this looks to actually be valid, as the clock is provided by a crystal on the PCB. Signed-off-by: Conor Dooley --- CC: Conor Dooley CC: Daire McNamara CC: Rob Herring CC: Krzysztof Kozlowski CC: Paul Walmsley CC: Palmer Dabbelt CC: linux-riscv@lists.infradead.org CC: devicetree@vger.kernel.org --- arch/riscv/boot/dts/microchip/mpfs-icicle-kit.dts | 7 ------- arch/riscv/boot/dts/microchip/mpfs-m100pfsevp.dts | 7 ------- arch/riscv/boot/dts/microchip/mpfs-polarberry.dts | 7 ------- arch/riscv/boot/dts/microchip/mpfs-sev-kit.dts | 7 ------- arch/riscv/boot/dts/microchip/mpfs-tysom-m.dts | 7 ------- arch/riscv/boot/dts/microchip/mpfs.dtsi | 1 + 6 files changed, 1 insertion(+), 35 deletions(-) diff --git a/arch/riscv/boot/dts/microchip/mpfs-icicle-kit.dts b/arch/riscv/boot/dts/microchip/mpfs-icicle-kit.dts index 90b261114763..dce96f27cc89 100644 --- a/arch/riscv/boot/dts/microchip/mpfs-icicle-kit.dts +++ b/arch/riscv/boot/dts/microchip/mpfs-icicle-kit.dts @@ -8,9 +8,6 @@ #include #include -/* Clock frequency (in Hz) of the rtcclk */ -#define RTCCLK_FREQ 1000000 - / { model = "Microchip PolarFire-SoC Icicle Kit"; compatible = "microchip,mpfs-icicle-reference-rtlv2210", "microchip,mpfs-icicle-kit", @@ -29,10 +26,6 @@ stdout-path = "serial1:115200n8"; }; - cpus { - timebase-frequency = ; - }; - leds { compatible = "gpio-leds"; diff --git a/arch/riscv/boot/dts/microchip/mpfs-m100pfsevp.dts b/arch/riscv/boot/dts/microchip/mpfs-m100pfsevp.dts index 184cb36a175e..a8d623ee9fa4 100644 --- a/arch/riscv/boot/dts/microchip/mpfs-m100pfsevp.dts +++ b/arch/riscv/boot/dts/microchip/mpfs-m100pfsevp.dts @@ -10,9 +10,6 @@ #include "mpfs.dtsi" #include "mpfs-m100pfs-fabric.dtsi" -/* Clock frequency (in Hz) of the rtcclk */ -#define MTIMER_FREQ 1000000 - / { model = "Aries Embedded M100PFEVPS"; compatible = "aries,m100pfsevp", "microchip,mpfs"; @@ -33,10 +30,6 @@ stdout-path = "serial1:115200n8"; }; - cpus { - timebase-frequency = ; - }; - ddrc_cache_lo: memory@80000000 { device_type = "memory"; reg = <0x0 0x80000000 0x0 0x40000000>; diff --git a/arch/riscv/boot/dts/microchip/mpfs-polarberry.dts b/arch/riscv/boot/dts/microchip/mpfs-polarberry.dts index c87cc2d8fe29..ea0808ab1042 100644 --- a/arch/riscv/boot/dts/microchip/mpfs-polarberry.dts +++ b/arch/riscv/boot/dts/microchip/mpfs-polarberry.dts @@ -6,9 +6,6 @@ #include "mpfs.dtsi" #include "mpfs-polarberry-fabric.dtsi" -/* Clock frequency (in Hz) of the rtcclk */ -#define MTIMER_FREQ 1000000 - / { model = "Sundance PolarBerry"; compatible = "sundance,polarberry", "microchip,mpfs"; @@ -22,10 +19,6 @@ stdout-path = "serial0:115200n8"; }; - cpus { - timebase-frequency = ; - }; - ddrc_cache_lo: memory@80000000 { device_type = "memory"; reg = <0x0 0x80000000 0x0 0x2e000000>; diff --git a/arch/riscv/boot/dts/microchip/mpfs-sev-kit.dts b/arch/riscv/boot/dts/microchip/mpfs-sev-kit.dts index 013cb666c72d..f9a890579438 100644 --- a/arch/riscv/boot/dts/microchip/mpfs-sev-kit.dts +++ b/arch/riscv/boot/dts/microchip/mpfs-sev-kit.dts @@ -6,9 +6,6 @@ #include "mpfs.dtsi" #include "mpfs-sev-kit-fabric.dtsi" -/* Clock frequency (in Hz) of the rtcclk */ -#define MTIMER_FREQ 1000000 - / { #address-cells = <2>; #size-cells = <2>; @@ -28,10 +25,6 @@ stdout-path = "serial1:115200n8"; }; - cpus { - timebase-frequency = ; - }; - reserved-memory { #address-cells = <2>; #size-cells = <2>; diff --git a/arch/riscv/boot/dts/microchip/mpfs-tysom-m.dts b/arch/riscv/boot/dts/microchip/mpfs-tysom-m.dts index e0797c7e1b35..d1120f5f2c01 100644 --- a/arch/riscv/boot/dts/microchip/mpfs-tysom-m.dts +++ b/arch/riscv/boot/dts/microchip/mpfs-tysom-m.dts @@ -11,9 +11,6 @@ #include "mpfs.dtsi" #include "mpfs-tysom-m-fabric.dtsi" -/* Clock frequency (in Hz) of the rtcclk */ -#define MTIMER_FREQ 1000000 - / { model = "Aldec TySOM-M-MPFS250T-REV2"; compatible = "aldec,tysom-m-mpfs250t-rev2", "microchip,mpfs"; @@ -34,10 +31,6 @@ stdout-path = "serial1:115200n8"; }; - cpus { - timebase-frequency = ; - }; - ddrc_cache_lo: memory@80000000 { device_type = "memory"; reg = <0x0 0x80000000 0x0 0x30000000>; diff --git a/arch/riscv/boot/dts/microchip/mpfs.dtsi b/arch/riscv/boot/dts/microchip/mpfs.dtsi index a6faf24f1dba..266489d43912 100644 --- a/arch/riscv/boot/dts/microchip/mpfs.dtsi +++ b/arch/riscv/boot/dts/microchip/mpfs.dtsi @@ -13,6 +13,7 @@ cpus { #address-cells = <1>; #size-cells = <0>; + timebase-frequency = <1000000>; cpu0: cpu@0 { compatible = "sifive,e51", "sifive,rocket0", "riscv"; -- cgit v1.2.3 From f422abe3f23d483cf01f386819f26fb3fe0dbb2b Mon Sep 17 00:00:00 2001 From: Ioana Ciornei Date: Fri, 24 Nov 2023 12:28:04 +0200 Subject: dpaa2-eth: increase the needed headroom to account for alignment Increase the needed headroom to account for a 64 byte alignment restriction which, with this patch, we make mandatory on the Tx path. The case in which the amount of headroom needed is not available is already handled by the driver which instead sends a S/G frame with the first buffer only holding the SW and HW annotation areas. Without this patch, we can empirically see data corruption happening between Tx and Tx confirmation which sometimes leads to the SW annotation area being overwritten. Since this is an old IP where the hardware team cannot help to understand the underlying behavior, we make the Tx alignment mandatory for all frames to avoid the crash on Tx conf. Also, remove the comment that suggested that this is just an optimization. This patch also sets the needed_headroom net device field to the usual value that the driver would need on the Tx path: - 64 bytes for the software annotation area - 64 bytes to account for a 64 byte aligned buffer address Fixes: 6e2387e8f19e ("staging: fsl-dpaa2/eth: Add Freescale DPAA2 Ethernet driver") Closes: https://lore.kernel.org/netdev/aa784d0c-85eb-4e5d-968b-c8f74fa86be6@gin.de/ Signed-off-by: Ioana Ciornei Signed-off-by: David S. Miller --- drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c | 8 ++++---- drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.h | 2 +- 2 files changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c index 15bab41cee48..774377db0b4b 100644 --- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c +++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c @@ -1073,14 +1073,12 @@ static int dpaa2_eth_build_single_fd(struct dpaa2_eth_priv *priv, dma_addr_t addr; buffer_start = skb->data - dpaa2_eth_needed_headroom(skb); - - /* If there's enough room to align the FD address, do it. - * It will help hardware optimize accesses. - */ aligned_start = PTR_ALIGN(buffer_start - DPAA2_ETH_TX_BUF_ALIGN, DPAA2_ETH_TX_BUF_ALIGN); if (aligned_start >= skb->head) buffer_start = aligned_start; + else + return -ENOMEM; /* Store a backpointer to the skb at the beginning of the buffer * (in the private data area) such that we can release it @@ -4967,6 +4965,8 @@ static int dpaa2_eth_probe(struct fsl_mc_device *dpni_dev) if (err) goto err_dl_port_add; + net_dev->needed_headroom = DPAA2_ETH_SWA_SIZE + DPAA2_ETH_TX_BUF_ALIGN; + err = register_netdev(net_dev); if (err < 0) { dev_err(dev, "register_netdev() failed\n"); diff --git a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.h b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.h index bfb6c96c3b2f..834cba8c3a41 100644 --- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.h +++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.h @@ -740,7 +740,7 @@ static inline bool dpaa2_eth_rx_pause_enabled(u64 link_options) static inline unsigned int dpaa2_eth_needed_headroom(struct sk_buff *skb) { - unsigned int headroom = DPAA2_ETH_SWA_SIZE; + unsigned int headroom = DPAA2_ETH_SWA_SIZE + DPAA2_ETH_TX_BUF_ALIGN; /* If we don't have an skb (e.g. XDP buffer), we only need space for * the software annotation area -- cgit v1.2.3 From beb1930f966d1517921488bd5d64147f58f79abf Mon Sep 17 00:00:00 2001 From: Ioana Ciornei Date: Fri, 24 Nov 2023 12:28:05 +0200 Subject: dpaa2-eth: recycle the RX buffer only after all processing done The blamed commit added support for Rx copybreak. This meant that for certain frame sizes, a new skb was allocated and the initial data buffer was recycled. Instead of waiting to recycle the Rx buffer only after all processing was done on it (like accessing the parse results or timestamp information), the code path just went ahead and re-used the buffer right away. This sometimes lead to corrupted HW and SW annotation areas. Fix this by delaying the moment when the buffer is recycled. Fixes: 50f826999a80 ("dpaa2-eth: add rx copybreak support") Signed-off-by: Ioana Ciornei Signed-off-by: David S. Miller --- drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c index 774377db0b4b..888509cf1f21 100644 --- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c +++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c @@ -516,8 +516,6 @@ struct sk_buff *dpaa2_eth_alloc_skb(struct dpaa2_eth_priv *priv, memcpy(skb->data, fd_vaddr + fd_offset, fd_length); - dpaa2_eth_recycle_buf(priv, ch, dpaa2_fd_get_addr(fd)); - return skb; } @@ -589,6 +587,7 @@ void dpaa2_eth_rx(struct dpaa2_eth_priv *priv, struct rtnl_link_stats64 *percpu_stats; struct dpaa2_eth_drv_stats *percpu_extras; struct device *dev = priv->net_dev->dev.parent; + bool recycle_rx_buf = false; void *buf_data; u32 xdp_act; @@ -618,6 +617,8 @@ void dpaa2_eth_rx(struct dpaa2_eth_priv *priv, dma_unmap_page(dev, addr, priv->rx_buf_size, DMA_BIDIRECTIONAL); skb = dpaa2_eth_build_linear_skb(ch, fd, vaddr); + } else { + recycle_rx_buf = true; } } else if (fd_format == dpaa2_fd_sg) { WARN_ON(priv->xdp_prog); @@ -637,6 +638,9 @@ void dpaa2_eth_rx(struct dpaa2_eth_priv *priv, goto err_build_skb; dpaa2_eth_receive_skb(priv, ch, fd, vaddr, fq, percpu_stats, skb); + + if (recycle_rx_buf) + dpaa2_eth_recycle_buf(priv, ch, dpaa2_fd_get_addr(fd)); return; err_build_skb: -- cgit v1.2.3 From 75a442581d05edaee168222ffbe00d4389785636 Mon Sep 17 00:00:00 2001 From: Hou Tao Date: Sat, 11 Nov 2023 12:38:21 +0800 Subject: bpf: Add missed allocation hint for bpf_mem_cache_alloc_flags() bpf_mem_cache_alloc_flags() may call __alloc() directly when there is no free object in free list, but it doesn't initialize the allocation hint for the returned pointer. It may lead to bad memory dereference when freeing the pointer, so fix it by initializing the allocation hint. Fixes: 822fb26bdb55 ("bpf: Add a hint to allocated objects.") Signed-off-by: Hou Tao Acked-by: Yonghong Song Link: https://lore.kernel.org/r/20231111043821.2258513-1-houtao@huaweicloud.com Signed-off-by: Alexei Starovoitov --- kernel/bpf/memalloc.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/kernel/bpf/memalloc.c b/kernel/bpf/memalloc.c index 63b909d277d4..6a51cfe4c2d6 100644 --- a/kernel/bpf/memalloc.c +++ b/kernel/bpf/memalloc.c @@ -978,6 +978,8 @@ void notrace *bpf_mem_cache_alloc_flags(struct bpf_mem_alloc *ma, gfp_t flags) memcg = get_memcg(c); old_memcg = set_active_memcg(memcg); ret = __alloc(c, NUMA_NO_NODE, GFP_KERNEL | __GFP_NOWARN | __GFP_ACCOUNT); + if (ret) + *(struct bpf_mem_cache **)ret = c; set_active_memcg(old_memcg); mem_cgroup_put(memcg); } -- cgit v1.2.3 From 2bfba37b3d90d6d2d499d5b0dfe99c05c38b1b54 Mon Sep 17 00:00:00 2001 From: Alexander Stein Date: Thu, 19 Oct 2023 08:32:17 +0200 Subject: arm64: dt: imx93: tqma9352-mba93xxla: Fix LPUART2 pad config LPUART2_RTS# has an external pull-down, so do not enable the internal pull-up at the same time, use a pull-down instead. Fixes: c982ecfa7992a ("arm64: dts: freescale: add initial device tree for MBa93xxLA SBC board") Signed-off-by: Alexander Stein Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxla.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxla.dts b/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxla.dts index f06139bdff97..3c5c67ebee5d 100644 --- a/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxla.dts +++ b/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxla.dts @@ -577,7 +577,7 @@ fsl,pins = < MX93_PAD_UART2_TXD__LPUART2_TX 0x31e MX93_PAD_UART2_RXD__LPUART2_RX 0x31e - MX93_PAD_SAI1_TXD0__LPUART2_RTS_B 0x31e + MX93_PAD_SAI1_TXD0__LPUART2_RTS_B 0x51e >; }; -- cgit v1.2.3 From 6552218f4dc47ba3c6c5b58cc1e9eb208a2b438b Mon Sep 17 00:00:00 2001 From: Stefan Kerkmann Date: Wed, 1 Nov 2023 12:03:37 +0100 Subject: ARM: dts: imx6q: skov: fix ethernet clock regression A regression was introduced in the Skov specific i.MX6 flavor reve-mi1010ait-1cp1 device tree causing the external ethernet controller to not being selected as the clock source for the i.MX6 ethernet MAC, resulting in a none functional ethernet interface. The root cause is that the ethernet clock selection is now part of the clocks node, which is overwritten in the specific device tree and wasn't updated to contain these ethernet clocks. Fixes: c89614079e44 ("ARM: dts: imx6qdl-skov-cpu: configure ethernet reference clock parent") Signed-off-by: Stefan Kerkmann Signed-off-by: Shawn Guo --- arch/arm/boot/dts/nxp/imx/imx6q-skov-reve-mi1010ait-1cp1.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-skov-reve-mi1010ait-1cp1.dts b/arch/arm/boot/dts/nxp/imx/imx6q-skov-reve-mi1010ait-1cp1.dts index a3f247c722b4..0342a79ccd5d 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6q-skov-reve-mi1010ait-1cp1.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6q-skov-reve-mi1010ait-1cp1.dts @@ -37,9 +37,9 @@ &clks { assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, - <&clks IMX6QDL_CLK_LDB_DI1_SEL>; + <&clks IMX6QDL_CLK_LDB_DI1_SEL>, <&clks IMX6QDL_CLK_ENET_REF_SEL>; assigned-clock-parents = <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>, - <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>; + <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>, <&clk50m_phy>; }; &hdmi { -- cgit v1.2.3 From 2cc14f52aeb78ce3f29677c2de1f06c0e91471ab Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sun, 26 Nov 2023 19:59:33 -0800 Subject: Linux 6.7-rc3 --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index 724c79bebe72..99db546fbb45 100644 --- a/Makefile +++ b/Makefile @@ -2,7 +2,7 @@ VERSION = 6 PATCHLEVEL = 7 SUBLEVEL = 0 -EXTRAVERSION = -rc2 +EXTRAVERSION = -rc3 NAME = Hurr durr I'ma ninja sloth # *DOCUMENTATION* -- cgit v1.2.3 From 34e2dccbb30baf7e5502bae382722aacbbfddc5b Mon Sep 17 00:00:00 2001 From: Jason Gunthorpe Date: Wed, 1 Nov 2023 20:28:11 -0300 Subject: iommu: Flow ERR_PTR out from __iommu_domain_alloc() Most of the calling code now has error handling that can carry an error code further up the call chain. Keep the exported interface iommu_domain_alloc() returning NULL and reflow the internal code to use ERR_PTR not NULL for domain allocation failure. Optionally allow drivers to return ERR_PTR from any of the alloc ops. Many of the new ops (user, sva, etc) already return ERR_PTR, so having two rules is confusing and hard on drivers. This fixes a bug in DART that was returning ERR_PTR. Fixes: 482feb5c6492 ("iommu/dart: Call apple_dart_finalize_domain() as part of alloc_paging()") Reported-by: Dan Carpenter Link: https://lore.kernel.org/linux-iommu/b85e0715-3224-4f45-ad6b-ebb9f08c015d@moroto.mountain/ Signed-off-by: Jason Gunthorpe Reviewed-by: Jerry Snitselaar Link: https://lore.kernel.org/r/0-v2-55ae413017b8+97-domain_alloc_err_ptr_jgg@nvidia.com Signed-off-by: Joerg Roedel --- drivers/iommu/iommu.c | 59 ++++++++++++++++++++++++++++++++++----------------- 1 file changed, 39 insertions(+), 20 deletions(-) diff --git a/drivers/iommu/iommu.c b/drivers/iommu/iommu.c index f17a1113f3d6..c9a05bb49bfa 100644 --- a/drivers/iommu/iommu.c +++ b/drivers/iommu/iommu.c @@ -1788,7 +1788,7 @@ iommu_group_alloc_default_domain(struct iommu_group *group, int req_type) */ if (ops->default_domain) { if (req_type) - return NULL; + return ERR_PTR(-EINVAL); return ops->default_domain; } @@ -1797,15 +1797,15 @@ iommu_group_alloc_default_domain(struct iommu_group *group, int req_type) /* The driver gave no guidance on what type to use, try the default */ dom = __iommu_group_alloc_default_domain(group, iommu_def_domain_type); - if (dom) + if (!IS_ERR(dom)) return dom; /* Otherwise IDENTITY and DMA_FQ defaults will try DMA */ if (iommu_def_domain_type == IOMMU_DOMAIN_DMA) - return NULL; + return ERR_PTR(-EINVAL); dom = __iommu_group_alloc_default_domain(group, IOMMU_DOMAIN_DMA); - if (!dom) - return NULL; + if (IS_ERR(dom)) + return dom; pr_warn("Failed to allocate default IOMMU domain of type %u for group %s - Falling back to IOMMU_DOMAIN_DMA", iommu_def_domain_type, group->name); @@ -2094,10 +2094,17 @@ static struct iommu_domain *__iommu_domain_alloc(const struct iommu_ops *ops, else if (ops->domain_alloc) domain = ops->domain_alloc(alloc_type); else - return NULL; + return ERR_PTR(-EOPNOTSUPP); + /* + * Many domain_alloc ops now return ERR_PTR, make things easier for the + * driver by accepting ERR_PTR from all domain_alloc ops instead of + * having two rules. + */ + if (IS_ERR(domain)) + return domain; if (!domain) - return NULL; + return ERR_PTR(-ENOMEM); domain->type = type; /* @@ -2110,9 +2117,14 @@ static struct iommu_domain *__iommu_domain_alloc(const struct iommu_ops *ops, if (!domain->ops) domain->ops = ops->default_domain_ops; - if (iommu_is_dma_domain(domain) && iommu_get_dma_cookie(domain)) { - iommu_domain_free(domain); - domain = NULL; + if (iommu_is_dma_domain(domain)) { + int rc; + + rc = iommu_get_dma_cookie(domain); + if (rc) { + iommu_domain_free(domain); + return ERR_PTR(rc); + } } return domain; } @@ -2129,10 +2141,15 @@ __iommu_group_domain_alloc(struct iommu_group *group, unsigned int type) struct iommu_domain *iommu_domain_alloc(const struct bus_type *bus) { + struct iommu_domain *domain; + if (bus == NULL || bus->iommu_ops == NULL) return NULL; - return __iommu_domain_alloc(bus->iommu_ops, NULL, + domain = __iommu_domain_alloc(bus->iommu_ops, NULL, IOMMU_DOMAIN_UNMANAGED); + if (IS_ERR(domain)) + return NULL; + return domain; } EXPORT_SYMBOL_GPL(iommu_domain_alloc); @@ -3041,8 +3058,8 @@ static int iommu_setup_default_domain(struct iommu_group *group, return -EINVAL; dom = iommu_group_alloc_default_domain(group, req_type); - if (!dom) - return -ENODEV; + if (IS_ERR(dom)) + return PTR_ERR(dom); if (group->default_domain == dom) return 0; @@ -3243,21 +3260,23 @@ void iommu_device_unuse_default_domain(struct device *dev) static int __iommu_group_alloc_blocking_domain(struct iommu_group *group) { + struct iommu_domain *domain; + if (group->blocking_domain) return 0; - group->blocking_domain = - __iommu_group_domain_alloc(group, IOMMU_DOMAIN_BLOCKED); - if (!group->blocking_domain) { + domain = __iommu_group_domain_alloc(group, IOMMU_DOMAIN_BLOCKED); + if (IS_ERR(domain)) { /* * For drivers that do not yet understand IOMMU_DOMAIN_BLOCKED * create an empty domain instead. */ - group->blocking_domain = __iommu_group_domain_alloc( - group, IOMMU_DOMAIN_UNMANAGED); - if (!group->blocking_domain) - return -EINVAL; + domain = __iommu_group_domain_alloc(group, + IOMMU_DOMAIN_UNMANAGED); + if (IS_ERR(domain)) + return PTR_ERR(domain); } + group->blocking_domain = domain; return 0; } -- cgit v1.2.3 From a99583e2aff64baf27b04b7d3a0341a52bf8e047 Mon Sep 17 00:00:00 2001 From: Dmitry Baryshkov Date: Sat, 4 Nov 2023 00:54:13 +0200 Subject: MAINTAINERS: list all Qualcomm IOMMU drivers in the QUALCOMM IOMMU entry For historical reasons the 'QUALCOMM IOMMU' entry lists only one Qualcomm IOMMU driver. However there are also the historical MSM IOMMU driver, which is used for old 32-bit platforms, and the Qualcomm-specific customisations for the generic ARM SMMU driver. List all these files under the QUALCOMM IOMMU entry. Signed-off-by: Dmitry Baryshkov Acked-by: Will Deacon Acked-by: Konrad Dybcio Link: https://lore.kernel.org/r/20231103225413.1479857-1-dmitry.baryshkov@linaro.org Signed-off-by: Joerg Roedel --- MAINTAINERS | 2 ++ 1 file changed, 2 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index 012df8ccf34e..874d562869e3 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -17948,6 +17948,8 @@ L: iommu@lists.linux.dev L: linux-arm-msm@vger.kernel.org S: Maintained F: drivers/iommu/arm/arm-smmu/qcom_iommu.c +F: drivers/iommu/arm/arm-smmu/arm-smmu-qcom* +F: drivers/iommu/msm_iommu* QUALCOMM IPC ROUTER (QRTR) DRIVER M: Manivannan Sadhasivam -- cgit v1.2.3 From a2e7e59a94269484a83386972ca07c22fd188854 Mon Sep 17 00:00:00 2001 From: Robin Murphy Date: Wed, 15 Nov 2023 18:25:44 +0000 Subject: iommu: Avoid more races around device probe MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit It turns out there are more subtle races beyond just the main part of __iommu_probe_device() itself running in parallel - the dev_iommu_free() on the way out of an unsuccessful probe can still manage to trip up concurrent accesses to a device's fwspec. Thus, extend the scope of iommu_probe_device_lock() to also serialise fwspec creation and initial retrieval. Reported-by: Zhenhua Huang Link: https://lore.kernel.org/linux-iommu/e2e20e1c-6450-4ac5-9804-b0000acdf7de@quicinc.com/ Fixes: 01657bc14a39 ("iommu: Avoid races around device probe") Signed-off-by: Robin Murphy Acked-by: Greg Kroah-Hartman Reviewed-by: André Draszik Tested-by: André Draszik Link: https://lore.kernel.org/r/16f433658661d7cadfea51e7c65da95826112a2b.1700071477.git.robin.murphy@arm.com Cc: stable@vger.kernel.org Signed-off-by: Joerg Roedel --- drivers/acpi/scan.c | 7 ++++++- drivers/iommu/iommu.c | 20 ++++++++++---------- drivers/iommu/of_iommu.c | 12 +++++++++--- include/linux/iommu.h | 1 + 4 files changed, 26 insertions(+), 14 deletions(-) diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c index fa5dd71a80fa..02bb2cce423f 100644 --- a/drivers/acpi/scan.c +++ b/drivers/acpi/scan.c @@ -1568,17 +1568,22 @@ static const struct iommu_ops *acpi_iommu_configure_id(struct device *dev, int err; const struct iommu_ops *ops; + /* Serialise to make dev->iommu stable under our potential fwspec */ + mutex_lock(&iommu_probe_device_lock); /* * If we already translated the fwspec there is nothing left to do, * return the iommu_ops. */ ops = acpi_iommu_fwspec_ops(dev); - if (ops) + if (ops) { + mutex_unlock(&iommu_probe_device_lock); return ops; + } err = iort_iommu_configure_id(dev, id_in); if (err && err != -EPROBE_DEFER) err = viot_iommu_configure(dev); + mutex_unlock(&iommu_probe_device_lock); /* * If we have reason to believe the IOMMU driver missed the initial diff --git a/drivers/iommu/iommu.c b/drivers/iommu/iommu.c index c9a05bb49bfa..33e2a9b5d339 100644 --- a/drivers/iommu/iommu.c +++ b/drivers/iommu/iommu.c @@ -485,11 +485,12 @@ static void iommu_deinit_device(struct device *dev) dev_iommu_free(dev); } +DEFINE_MUTEX(iommu_probe_device_lock); + static int __iommu_probe_device(struct device *dev, struct list_head *group_list) { const struct iommu_ops *ops = dev->bus->iommu_ops; struct iommu_group *group; - static DEFINE_MUTEX(iommu_probe_device_lock); struct group_device *gdev; int ret; @@ -502,17 +503,15 @@ static int __iommu_probe_device(struct device *dev, struct list_head *group_list * probably be able to use device_lock() here to minimise the scope, * but for now enforcing a simple global ordering is fine. */ - mutex_lock(&iommu_probe_device_lock); + lockdep_assert_held(&iommu_probe_device_lock); /* Device is probed already if in a group */ - if (dev->iommu_group) { - ret = 0; - goto out_unlock; - } + if (dev->iommu_group) + return 0; ret = iommu_init_device(dev, ops); if (ret) - goto out_unlock; + return ret; group = dev->iommu_group; gdev = iommu_group_alloc_device(group, dev); @@ -548,7 +547,6 @@ static int __iommu_probe_device(struct device *dev, struct list_head *group_list list_add_tail(&group->entry, group_list); } mutex_unlock(&group->mutex); - mutex_unlock(&iommu_probe_device_lock); if (dev_is_pci(dev)) iommu_dma_set_pci_32bit_workaround(dev); @@ -562,8 +560,6 @@ err_put_group: iommu_deinit_device(dev); mutex_unlock(&group->mutex); iommu_group_put(group); -out_unlock: - mutex_unlock(&iommu_probe_device_lock); return ret; } @@ -573,7 +569,9 @@ int iommu_probe_device(struct device *dev) const struct iommu_ops *ops; int ret; + mutex_lock(&iommu_probe_device_lock); ret = __iommu_probe_device(dev, NULL); + mutex_unlock(&iommu_probe_device_lock); if (ret) return ret; @@ -1822,7 +1820,9 @@ static int probe_iommu_group(struct device *dev, void *data) struct list_head *group_list = data; int ret; + mutex_lock(&iommu_probe_device_lock); ret = __iommu_probe_device(dev, group_list); + mutex_unlock(&iommu_probe_device_lock); if (ret == -ENODEV) ret = 0; diff --git a/drivers/iommu/of_iommu.c b/drivers/iommu/of_iommu.c index 157b286e36bf..c25b4ae6aeee 100644 --- a/drivers/iommu/of_iommu.c +++ b/drivers/iommu/of_iommu.c @@ -112,16 +112,20 @@ const struct iommu_ops *of_iommu_configure(struct device *dev, const u32 *id) { const struct iommu_ops *ops = NULL; - struct iommu_fwspec *fwspec = dev_iommu_fwspec_get(dev); + struct iommu_fwspec *fwspec; int err = NO_IOMMU; if (!master_np) return NULL; + /* Serialise to make dev->iommu stable under our potential fwspec */ + mutex_lock(&iommu_probe_device_lock); + fwspec = dev_iommu_fwspec_get(dev); if (fwspec) { - if (fwspec->ops) + if (fwspec->ops) { + mutex_unlock(&iommu_probe_device_lock); return fwspec->ops; - + } /* In the deferred case, start again from scratch */ iommu_fwspec_free(dev); } @@ -155,6 +159,8 @@ const struct iommu_ops *of_iommu_configure(struct device *dev, fwspec = dev_iommu_fwspec_get(dev); ops = fwspec->ops; } + mutex_unlock(&iommu_probe_device_lock); + /* * If we have reason to believe the IOMMU driver missed the initial * probe for dev, replay it to get things in order. diff --git a/include/linux/iommu.h b/include/linux/iommu.h index ec289c1016f5..6291aa7b079b 100644 --- a/include/linux/iommu.h +++ b/include/linux/iommu.h @@ -845,6 +845,7 @@ static inline void dev_iommu_priv_set(struct device *dev, void *priv) dev->iommu->priv = priv; } +extern struct mutex iommu_probe_device_lock; int iommu_probe_device(struct device *dev); int iommu_dev_enable_feature(struct device *dev, enum iommu_dev_features f); -- cgit v1.2.3 From 487635756198cad563feb47539c6a37ea57f1dae Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Mon, 27 Nov 2023 10:39:26 +0100 Subject: parisc: Fix asm operand number out of range build error in bug table Build is broken if CONFIG_DEBUG_BUGVERBOSE=n. Fix it be using the correct asm operand number. Signed-off-by: Helge Deller Reported-by: Linux Kernel Functional Testing Fixes: fe76a1349f23 ("parisc: Use natural CPU alignment for bug_table") Cc: stable@vger.kernel.org # v6.0+ --- arch/parisc/include/asm/bug.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/parisc/include/asm/bug.h b/arch/parisc/include/asm/bug.h index 1641ff9a8b83..833555f74ffa 100644 --- a/arch/parisc/include/asm/bug.h +++ b/arch/parisc/include/asm/bug.h @@ -71,7 +71,7 @@ asm volatile("\n" \ "1:\t" PARISC_BUG_BREAK_ASM "\n" \ "\t.pushsection __bug_table,\"a\"\n" \ - "\t.align %2\n" \ + "\t.align 4\n" \ "2:\t" __BUG_REL(1b) "\n" \ "\t.short %0\n" \ "\t.blockz %1-4-2\n" \ -- cgit v1.2.3 From e645c20e8e9cde549bc233435d3c1338e1cd27fe Mon Sep 17 00:00:00 2001 From: Lu Baolu Date: Wed, 22 Nov 2023 11:26:02 +0800 Subject: iommu/vt-d: Support enforce_cache_coherency only for empty domains The enforce_cache_coherency callback ensures DMA cache coherency for devices attached to the domain. Intel IOMMU supports enforced DMA cache coherency when the Snoop Control bit in the IOMMU's extended capability register is set. Supporting it differs between legacy and scalable modes. In legacy mode, it's supported page-level by setting the SNP field in second-stage page-table entries. In scalable mode, it's supported in PASID-table granularity by setting the PGSNP field in PASID-table entries. In legacy mode, mappings before attaching to a device have SNP fields cleared, while mappings after the callback have them set. This means partial DMAs are cache coherent while others are not. One possible fix is replaying mappings and flipping SNP bits when attaching a domain to a device. But this seems to be over-engineered, given that all real use cases just attach an empty domain to a device. To meet practical needs while reducing mode differences, only support enforce_cache_coherency on a domain without mappings if SNP field is used. Fixes: fc0051cb9590 ("iommu/vt-d: Check domain force_snooping against attached devices") Signed-off-by: Lu Baolu Reviewed-by: Kevin Tian Link: https://lore.kernel.org/r/20231114011036.70142-1-baolu.lu@linux.intel.com Signed-off-by: Joerg Roedel --- drivers/iommu/intel/iommu.c | 5 ++++- drivers/iommu/intel/iommu.h | 3 +++ 2 files changed, 7 insertions(+), 1 deletion(-) diff --git a/drivers/iommu/intel/iommu.c b/drivers/iommu/intel/iommu.c index 3531b956556c..11670cd812a3 100644 --- a/drivers/iommu/intel/iommu.c +++ b/drivers/iommu/intel/iommu.c @@ -2207,6 +2207,8 @@ __domain_mapping(struct dmar_domain *domain, unsigned long iov_pfn, attr |= DMA_FL_PTE_DIRTY; } + domain->has_mappings = true; + pteval = ((phys_addr_t)phys_pfn << VTD_PAGE_SHIFT) | attr; while (nr_pages > 0) { @@ -4360,7 +4362,8 @@ static bool intel_iommu_enforce_cache_coherency(struct iommu_domain *domain) return true; spin_lock_irqsave(&dmar_domain->lock, flags); - if (!domain_support_force_snooping(dmar_domain)) { + if (!domain_support_force_snooping(dmar_domain) || + (!dmar_domain->use_first_level && dmar_domain->has_mappings)) { spin_unlock_irqrestore(&dmar_domain->lock, flags); return false; } diff --git a/drivers/iommu/intel/iommu.h b/drivers/iommu/intel/iommu.h index 65d37a138c75..ce030c5b5772 100644 --- a/drivers/iommu/intel/iommu.h +++ b/drivers/iommu/intel/iommu.h @@ -602,6 +602,9 @@ struct dmar_domain { */ u8 dirty_tracking:1; /* Dirty tracking is enabled */ u8 nested_parent:1; /* Has other domains nested on it */ + u8 has_mappings:1; /* Has mappings configured through + * iommu_map() interface. + */ spinlock_t lock; /* Protect device tracking lists */ struct list_head devices; /* all devices' list */ -- cgit v1.2.3 From 0f5432a9b839847dcfe9fa369d72e3d646102ddf Mon Sep 17 00:00:00 2001 From: Lu Baolu Date: Wed, 22 Nov 2023 11:26:03 +0800 Subject: iommu/vt-d: Omit devTLB invalidation requests when TES=0 The latest VT-d spec indicates that when remapping hardware is disabled (TES=0 in Global Status Register), upstream ATS Invalidation Completion requests are treated as UR (Unsupported Request). Consequently, the spec recommends in section 4.3 Handling of Device-TLB Invalidations that software refrain from submitting any Device-TLB invalidation requests when address remapping hardware is disabled. Verify address remapping hardware is enabled prior to submitting Device- TLB invalidation requests. Fixes: 792fb43ce2c9 ("iommu/vt-d: Enable Intel IOMMU scalable mode by default") Signed-off-by: Lu Baolu Reviewed-by: Kevin Tian Link: https://lore.kernel.org/r/20231114011036.70142-2-baolu.lu@linux.intel.com Signed-off-by: Joerg Roedel --- drivers/iommu/intel/dmar.c | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) diff --git a/drivers/iommu/intel/dmar.c b/drivers/iommu/intel/dmar.c index a3414afe11b0..23cb80d62a9a 100644 --- a/drivers/iommu/intel/dmar.c +++ b/drivers/iommu/intel/dmar.c @@ -1522,6 +1522,15 @@ void qi_flush_dev_iotlb(struct intel_iommu *iommu, u16 sid, u16 pfsid, { struct qi_desc desc; + /* + * VT-d spec, section 4.3: + * + * Software is recommended to not submit any Device-TLB invalidation + * requests while address remapping hardware is disabled. + */ + if (!(iommu->gcmd & DMA_GCMD_TE)) + return; + if (mask) { addr |= (1ULL << (VTD_PAGE_SHIFT + mask - 1)) - 1; desc.qw1 = QI_DEV_IOTLB_ADDR(addr) | QI_DEV_IOTLB_SIZE; @@ -1587,6 +1596,15 @@ void qi_flush_dev_iotlb_pasid(struct intel_iommu *iommu, u16 sid, u16 pfsid, unsigned long mask = 1UL << (VTD_PAGE_SHIFT + size_order - 1); struct qi_desc desc = {.qw1 = 0, .qw2 = 0, .qw3 = 0}; + /* + * VT-d spec, section 4.3: + * + * Software is recommended to not submit any Device-TLB invalidation + * requests while address remapping hardware is disabled. + */ + if (!(iommu->gcmd & DMA_GCMD_TE)) + return; + desc.qw0 = QI_DEV_EIOTLB_PASID(pasid) | QI_DEV_EIOTLB_SID(sid) | QI_DEV_EIOTLB_QDEP(qdep) | QI_DEIOTLB_TYPE | QI_DEV_IOTLB_PFSID(pfsid); -- cgit v1.2.3 From da37dddcf4caf015c400a930301d2ee27a7a15fb Mon Sep 17 00:00:00 2001 From: Lu Baolu Date: Wed, 22 Nov 2023 11:26:04 +0800 Subject: iommu/vt-d: Disable PCI ATS in legacy passthrough mode When IOMMU hardware operates in legacy mode, the TT field of the context entry determines the translation type, with three supported types (Section 9.3 Context Entry): - DMA translation without device TLB support - DMA translation with device TLB support - Passthrough mode with translated and translation requests blocked Device TLB support is absent when hardware is configured in passthrough mode. Disable the PCI ATS feature when IOMMU is configured for passthrough translation type in legacy (non-scalable) mode. Fixes: 0faa19a1515f ("iommu/vt-d: Decouple PASID & PRI enabling from SVA") Signed-off-by: Lu Baolu Reviewed-by: Kevin Tian Link: https://lore.kernel.org/r/20231114011036.70142-3-baolu.lu@linux.intel.com Signed-off-by: Joerg Roedel --- drivers/iommu/intel/iommu.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/iommu/intel/iommu.c b/drivers/iommu/intel/iommu.c index 11670cd812a3..9bddd4fbbdf8 100644 --- a/drivers/iommu/intel/iommu.c +++ b/drivers/iommu/intel/iommu.c @@ -2492,7 +2492,8 @@ static int dmar_domain_attach_device(struct dmar_domain *domain, return ret; } - iommu_enable_pci_caps(info); + if (sm_supported(info->iommu) || !domain_type_is_si(info->domain)) + iommu_enable_pci_caps(info); return 0; } -- cgit v1.2.3 From 9a16ab9d640274b20813d2d17475e18d3e99d834 Mon Sep 17 00:00:00 2001 From: Lu Baolu Date: Wed, 22 Nov 2023 11:26:05 +0800 Subject: iommu/vt-d: Make context clearing consistent with context mapping In the iommu probe_device path, domain_context_mapping() allows setting up the context entry for a non-PCI device. However, in the iommu release_device path, domain_context_clear() only clears context entries for PCI devices. Make domain_context_clear() behave consistently with domain_context_mapping() by clearing context entries for both PCI and non-PCI devices. Fixes: 579305f75d34 ("iommu/vt-d: Update to use PCI DMA aliases") Signed-off-by: Lu Baolu Reviewed-by: Kevin Tian Link: https://lore.kernel.org/r/20231114011036.70142-4-baolu.lu@linux.intel.com Signed-off-by: Joerg Roedel --- drivers/iommu/intel/iommu.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/iommu/intel/iommu.c b/drivers/iommu/intel/iommu.c index 9bddd4fbbdf8..4c257ccf9dc3 100644 --- a/drivers/iommu/intel/iommu.c +++ b/drivers/iommu/intel/iommu.c @@ -3928,8 +3928,8 @@ static int domain_context_clear_one_cb(struct pci_dev *pdev, u16 alias, void *op */ static void domain_context_clear(struct device_domain_info *info) { - if (!info->iommu || !info->dev || !dev_is_pci(info->dev)) - return; + if (!dev_is_pci(info->dev)) + domain_context_clear_one(info, info->bus, info->devfn); pci_for_each_dma_alias(to_pci_dev(info->dev), &domain_context_clear_one_cb, info); -- cgit v1.2.3 From 85b80fdffa867d75dfb9084a839e7949e29064e8 Mon Sep 17 00:00:00 2001 From: "Abdul Halim, Mohd Syazwan" Date: Wed, 22 Nov 2023 11:26:06 +0800 Subject: iommu/vt-d: Add MTL to quirk list to skip TE disabling The VT-d spec requires (10.4.4 Global Command Register, TE field) that: Hardware implementations supporting DMA draining must drain any in-flight DMA read/write requests queued within the Root-Complex before switching address translation on or off and reflecting the status of the command through the TES field in the Global Status register. Unfortunately, some integrated graphic devices fail to do so after some kind of power state transition. As the result, the system might stuck in iommu_disable_translation(), waiting for the completion of TE transition. Add MTL to the quirk list for those devices and skips TE disabling if the qurik hits. Fixes: b1012ca8dc4f ("iommu/vt-d: Skip TE disabling on quirky gfx dedicated iommu") Cc: stable@vger.kernel.org Signed-off-by: Abdul Halim, Mohd Syazwan Signed-off-by: Lu Baolu Link: https://lore.kernel.org/r/20231116022324.30120-1-baolu.lu@linux.intel.com Signed-off-by: Joerg Roedel --- drivers/iommu/intel/iommu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/iommu/intel/iommu.c b/drivers/iommu/intel/iommu.c index 4c257ccf9dc3..68f121c28fbf 100644 --- a/drivers/iommu/intel/iommu.c +++ b/drivers/iommu/intel/iommu.c @@ -5077,7 +5077,7 @@ static void quirk_igfx_skip_te_disable(struct pci_dev *dev) ver = (dev->device >> 8) & 0xff; if (ver != 0x45 && ver != 0x46 && ver != 0x4c && ver != 0x4e && ver != 0x8a && ver != 0x98 && - ver != 0x9a && ver != 0xa7) + ver != 0x9a && ver != 0xa7 && ver != 0x7d) return; if (risky_device(dev)) -- cgit v1.2.3 From e7ad6c2a4b1aa710db94060b716f53c812cef565 Mon Sep 17 00:00:00 2001 From: Lu Baolu Date: Wed, 22 Nov 2023 11:26:07 +0800 Subject: iommu/vt-d: Fix incorrect cache invalidation for mm notification Commit 6bbd42e2df8f ("mmu_notifiers: call invalidate_range() when invalidating TLBs") moved the secondary TLB invalidations into the TLB invalidation functions to ensure that all secondary TLB invalidations happen at the same time as the CPU invalidation and added a flush-all type of secondary TLB invalidation for the batched mode, where a range of [0, -1UL) is used to indicates that the range extends to the end of the address space. However, using an end address of -1UL caused an overflow in the Intel IOMMU driver, where the end address was rounded up to the next page. As a result, both the IOTLB and device ATC were not invalidated correctly. Add a flush all helper function and call it when the invalidation range is from 0 to -1UL, ensuring that the entire caches are invalidated correctly. Fixes: 6bbd42e2df8f ("mmu_notifiers: call invalidate_range() when invalidating TLBs") Cc: stable@vger.kernel.org Cc: Huang Ying Cc: Alistair Popple Tested-by: Luo Yuzhang # QAT Tested-by: Tony Zhu # DSA Reviewed-by: Jason Gunthorpe Reviewed-by: Alistair Popple Signed-off-by: Lu Baolu Link: https://lore.kernel.org/r/20231117090933.75267-1-baolu.lu@linux.intel.com Signed-off-by: Joerg Roedel --- drivers/iommu/intel/svm.c | 26 ++++++++++++++++++++++++++ 1 file changed, 26 insertions(+) diff --git a/drivers/iommu/intel/svm.c b/drivers/iommu/intel/svm.c index 50a481c895b8..ac12f76c1212 100644 --- a/drivers/iommu/intel/svm.c +++ b/drivers/iommu/intel/svm.c @@ -216,6 +216,27 @@ static void intel_flush_svm_range(struct intel_svm *svm, unsigned long address, rcu_read_unlock(); } +static void intel_flush_svm_all(struct intel_svm *svm) +{ + struct device_domain_info *info; + struct intel_svm_dev *sdev; + + rcu_read_lock(); + list_for_each_entry_rcu(sdev, &svm->devs, list) { + info = dev_iommu_priv_get(sdev->dev); + + qi_flush_piotlb(sdev->iommu, sdev->did, svm->pasid, 0, -1UL, 0); + if (info->ats_enabled) { + qi_flush_dev_iotlb_pasid(sdev->iommu, sdev->sid, info->pfsid, + svm->pasid, sdev->qdep, + 0, 64 - VTD_PAGE_SHIFT); + quirk_extra_dev_tlb_flush(info, 0, 64 - VTD_PAGE_SHIFT, + svm->pasid, sdev->qdep); + } + } + rcu_read_unlock(); +} + /* Pages have been freed at this point */ static void intel_arch_invalidate_secondary_tlbs(struct mmu_notifier *mn, struct mm_struct *mm, @@ -223,6 +244,11 @@ static void intel_arch_invalidate_secondary_tlbs(struct mmu_notifier *mn, { struct intel_svm *svm = container_of(mn, struct intel_svm, notifier); + if (start == 0 && end == -1UL) { + intel_flush_svm_all(svm); + return; + } + intel_flush_svm_range(svm, start, (end - start + PAGE_SIZE - 1) >> VTD_PAGE_SHIFT, 0); } -- cgit v1.2.3 From e378c7de74620051c3be899a8c2506c25d23049d Mon Sep 17 00:00:00 2001 From: Kunwu Chan Date: Wed, 22 Nov 2023 11:26:08 +0800 Subject: iommu/vt-d: Set variable intel_dirty_ops to static Fix the following warning: drivers/iommu/intel/iommu.c:302:30: warning: symbol 'intel_dirty_ops' was not declared. Should it be static? This variable is only used in its defining file, so it should be static. Fixes: f35f22cc760e ("iommu/vt-d: Access/Dirty bit support for SS domains") Signed-off-by: Kunwu Chan Reviewed-by: Jason Gunthorpe Reviewed-by: Joao Martins Link: https://lore.kernel.org/r/20231120101025.1103404-1-chentao@kylinos.cn Signed-off-by: Lu Baolu Signed-off-by: Joerg Roedel --- drivers/iommu/intel/iommu.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/iommu/intel/iommu.c b/drivers/iommu/intel/iommu.c index 68f121c28fbf..897159dba47d 100644 --- a/drivers/iommu/intel/iommu.c +++ b/drivers/iommu/intel/iommu.c @@ -299,7 +299,7 @@ static int iommu_skip_te_disable; #define IDENTMAP_AZALIA 4 const struct iommu_ops intel_iommu_ops; -const struct iommu_dirty_ops intel_dirty_ops; +static const struct iommu_dirty_ops intel_dirty_ops; static bool translation_pre_enabled(struct intel_iommu *iommu) { @@ -4929,7 +4929,7 @@ static int intel_iommu_read_and_clear_dirty(struct iommu_domain *domain, return 0; } -const struct iommu_dirty_ops intel_dirty_ops = { +static const struct iommu_dirty_ops intel_dirty_ops = { .set_dirty_tracking = intel_iommu_set_dirty_tracking, .read_and_clear_dirty = intel_iommu_read_and_clear_dirty, }; -- cgit v1.2.3 From 0ed04a1847a10297595ac24dc7d46b35fb35f90a Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 24 Nov 2023 17:25:24 +0100 Subject: debugfs: fix automount d_fsdata usage debugfs_create_automount() stores a function pointer in d_fsdata, but since commit 7c8d469877b1 ("debugfs: add support for more elaborate ->d_fsdata") debugfs_release_dentry() will free it, now conditionally on DEBUGFS_FSDATA_IS_REAL_FOPS_BIT, but that's not set for the function pointer in automount. As a result, removing an automount dentry would attempt to free the function pointer. Luckily, the only user of this (tracing) never removes it. Nevertheless, it's safer if we just handle the fsdata in one way, namely either DEBUGFS_FSDATA_IS_REAL_FOPS_BIT or allocated. Thus, change the automount to allocate it, and use the real_fops in the data to indicate whether or not automount is filled, rather than adding a type tag. At least for now this isn't actually needed, but the next changes will require it. Also check in debugfs_file_get() that it gets only called on regular files, just to make things clearer. Acked-by: Greg Kroah-Hartman Signed-off-by: Johannes Berg --- fs/debugfs/file.c | 8 ++++++++ fs/debugfs/inode.c | 27 ++++++++++++++++++++------- fs/debugfs/internal.h | 10 ++++++++-- 3 files changed, 36 insertions(+), 9 deletions(-) diff --git a/fs/debugfs/file.c b/fs/debugfs/file.c index 87b3753aa4b1..e00189aebbf4 100644 --- a/fs/debugfs/file.c +++ b/fs/debugfs/file.c @@ -84,6 +84,14 @@ int debugfs_file_get(struct dentry *dentry) struct debugfs_fsdata *fsd; void *d_fsd; + /* + * This could only happen if some debugfs user erroneously calls + * debugfs_file_get() on a dentry that isn't even a file, let + * them know about it. + */ + if (WARN_ON(!d_is_reg(dentry))) + return -EINVAL; + d_fsd = READ_ONCE(dentry->d_fsdata); if (!((unsigned long)d_fsd & DEBUGFS_FSDATA_IS_REAL_FOPS_BIT)) { fsd = d_fsd; diff --git a/fs/debugfs/inode.c b/fs/debugfs/inode.c index 83e57e9f9fa0..dcde4199a625 100644 --- a/fs/debugfs/inode.c +++ b/fs/debugfs/inode.c @@ -236,17 +236,19 @@ static const struct super_operations debugfs_super_operations = { static void debugfs_release_dentry(struct dentry *dentry) { - void *fsd = dentry->d_fsdata; + struct debugfs_fsdata *fsd = dentry->d_fsdata; - if (!((unsigned long)fsd & DEBUGFS_FSDATA_IS_REAL_FOPS_BIT)) - kfree(dentry->d_fsdata); + if ((unsigned long)fsd & DEBUGFS_FSDATA_IS_REAL_FOPS_BIT) + return; + + kfree(fsd); } static struct vfsmount *debugfs_automount(struct path *path) { - debugfs_automount_t f; - f = (debugfs_automount_t)path->dentry->d_fsdata; - return f(path->dentry, d_inode(path->dentry)->i_private); + struct debugfs_fsdata *fsd = path->dentry->d_fsdata; + + return fsd->automount(path->dentry, d_inode(path->dentry)->i_private); } static const struct dentry_operations debugfs_dops = { @@ -634,13 +636,23 @@ struct dentry *debugfs_create_automount(const char *name, void *data) { struct dentry *dentry = start_creating(name, parent); + struct debugfs_fsdata *fsd; struct inode *inode; if (IS_ERR(dentry)) return dentry; + fsd = kzalloc(sizeof(*fsd), GFP_KERNEL); + if (!fsd) { + failed_creating(dentry); + return ERR_PTR(-ENOMEM); + } + + fsd->automount = f; + if (!(debugfs_allow & DEBUGFS_ALLOW_API)) { failed_creating(dentry); + kfree(fsd); return ERR_PTR(-EPERM); } @@ -648,13 +660,14 @@ struct dentry *debugfs_create_automount(const char *name, if (unlikely(!inode)) { pr_err("out of free dentries, can not create automount '%s'\n", name); + kfree(fsd); return failed_creating(dentry); } make_empty_dir_inode(inode); inode->i_flags |= S_AUTOMOUNT; inode->i_private = data; - dentry->d_fsdata = (void *)f; + dentry->d_fsdata = fsd; /* directory inodes start off with i_nlink == 2 (for "." entry) */ inc_nlink(inode); d_instantiate(dentry, inode); diff --git a/fs/debugfs/internal.h b/fs/debugfs/internal.h index 92af8ae31313..f7c489b5a368 100644 --- a/fs/debugfs/internal.h +++ b/fs/debugfs/internal.h @@ -17,8 +17,14 @@ extern const struct file_operations debugfs_full_proxy_file_operations; struct debugfs_fsdata { const struct file_operations *real_fops; - refcount_t active_users; - struct completion active_users_drained; + union { + /* automount_fn is used when real_fops is NULL */ + debugfs_automount_t automount; + struct { + refcount_t active_users; + struct completion active_users_drained; + }; + }; }; /* -- cgit v1.2.3 From f4acfcd4deb158b96595250cc332901b282d15b0 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 24 Nov 2023 17:25:25 +0100 Subject: debugfs: annotate debugfs handlers vs. removal with lockdep When you take a lock in a debugfs handler but also try to remove the debugfs file under that lock, things can deadlock since the removal has to wait for all users to finish. Add lockdep annotations in debugfs_file_get()/_put() to catch such issues. Acked-by: Greg Kroah-Hartman Signed-off-by: Johannes Berg --- fs/debugfs/file.c | 10 ++++++++++ fs/debugfs/inode.c | 12 ++++++++++++ fs/debugfs/internal.h | 6 ++++++ 3 files changed, 28 insertions(+) diff --git a/fs/debugfs/file.c b/fs/debugfs/file.c index e00189aebbf4..3eff92450fd5 100644 --- a/fs/debugfs/file.c +++ b/fs/debugfs/file.c @@ -108,6 +108,12 @@ int debugfs_file_get(struct dentry *dentry) kfree(fsd); fsd = READ_ONCE(dentry->d_fsdata); } +#ifdef CONFIG_LOCKDEP + fsd->lock_name = kasprintf(GFP_KERNEL, "debugfs:%pd", dentry); + lockdep_register_key(&fsd->key); + lockdep_init_map(&fsd->lockdep_map, fsd->lock_name ?: "debugfs", + &fsd->key, 0); +#endif } /* @@ -124,6 +130,8 @@ int debugfs_file_get(struct dentry *dentry) if (!refcount_inc_not_zero(&fsd->active_users)) return -EIO; + lock_map_acquire_read(&fsd->lockdep_map); + return 0; } EXPORT_SYMBOL_GPL(debugfs_file_get); @@ -141,6 +149,8 @@ void debugfs_file_put(struct dentry *dentry) { struct debugfs_fsdata *fsd = READ_ONCE(dentry->d_fsdata); + lock_map_release(&fsd->lockdep_map); + if (refcount_dec_and_test(&fsd->active_users)) complete(&fsd->active_users_drained); } diff --git a/fs/debugfs/inode.c b/fs/debugfs/inode.c index dcde4199a625..80f4f000dcc1 100644 --- a/fs/debugfs/inode.c +++ b/fs/debugfs/inode.c @@ -241,6 +241,14 @@ static void debugfs_release_dentry(struct dentry *dentry) if ((unsigned long)fsd & DEBUGFS_FSDATA_IS_REAL_FOPS_BIT) return; + /* check it wasn't a dir (no fsdata) or automount (no real_fops) */ + if (fsd && fsd->real_fops) { +#ifdef CONFIG_LOCKDEP + lockdep_unregister_key(&fsd->key); + kfree(fsd->lock_name); +#endif + } + kfree(fsd); } @@ -744,6 +752,10 @@ static void __debugfs_file_removed(struct dentry *dentry) fsd = READ_ONCE(dentry->d_fsdata); if ((unsigned long)fsd & DEBUGFS_FSDATA_IS_REAL_FOPS_BIT) return; + + lock_map_acquire(&fsd->lockdep_map); + lock_map_release(&fsd->lockdep_map); + if (!refcount_dec_and_test(&fsd->active_users)) wait_for_completion(&fsd->active_users_drained); } diff --git a/fs/debugfs/internal.h b/fs/debugfs/internal.h index f7c489b5a368..c7d61cfc97d2 100644 --- a/fs/debugfs/internal.h +++ b/fs/debugfs/internal.h @@ -7,6 +7,7 @@ #ifndef _DEBUGFS_INTERNAL_H_ #define _DEBUGFS_INTERNAL_H_ +#include struct file_operations; @@ -23,6 +24,11 @@ struct debugfs_fsdata { struct { refcount_t active_users; struct completion active_users_drained; +#ifdef CONFIG_LOCKDEP + struct lockdep_map lockdep_map; + struct lock_class_key key; + char *lock_name; +#endif }; }; }; -- cgit v1.2.3 From 8c88a474357ead632b07c70bf7f119ace8c3b39e Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 24 Nov 2023 17:25:26 +0100 Subject: debugfs: add API to allow debugfs operations cancellation In some cases there might be longer-running hardware accesses in debugfs files, or attempts to acquire locks, and we want to still be able to quickly remove the files. Introduce a cancellations API to use inside the debugfs handler functions to be able to cancel such operations on a per-file basis. Acked-by: Greg Kroah-Hartman Signed-off-by: Johannes Berg --- fs/debugfs/file.c | 82 +++++++++++++++++++++++++++++++++++++++++++++++++ fs/debugfs/inode.c | 32 ++++++++++++++++++- fs/debugfs/internal.h | 5 +++ include/linux/debugfs.h | 19 ++++++++++++ 4 files changed, 137 insertions(+), 1 deletion(-) diff --git a/fs/debugfs/file.c b/fs/debugfs/file.c index 3eff92450fd5..5568cdea3490 100644 --- a/fs/debugfs/file.c +++ b/fs/debugfs/file.c @@ -114,6 +114,8 @@ int debugfs_file_get(struct dentry *dentry) lockdep_init_map(&fsd->lockdep_map, fsd->lock_name ?: "debugfs", &fsd->key, 0); #endif + INIT_LIST_HEAD(&fsd->cancellations); + mutex_init(&fsd->cancellations_mtx); } /* @@ -156,6 +158,86 @@ void debugfs_file_put(struct dentry *dentry) } EXPORT_SYMBOL_GPL(debugfs_file_put); +/** + * debugfs_enter_cancellation - enter a debugfs cancellation + * @file: the file being accessed + * @cancellation: the cancellation object, the cancel callback + * inside of it must be initialized + * + * When a debugfs file is removed it needs to wait for all active + * operations to complete. However, the operation itself may need + * to wait for hardware or completion of some asynchronous process + * or similar. As such, it may need to be cancelled to avoid long + * waits or even deadlocks. + * + * This function can be used inside a debugfs handler that may + * need to be cancelled. As soon as this function is called, the + * cancellation's 'cancel' callback may be called, at which point + * the caller should proceed to call debugfs_leave_cancellation() + * and leave the debugfs handler function as soon as possible. + * Note that the 'cancel' callback is only ever called in the + * context of some kind of debugfs_remove(). + * + * This function must be paired with debugfs_leave_cancellation(). + */ +void debugfs_enter_cancellation(struct file *file, + struct debugfs_cancellation *cancellation) +{ + struct debugfs_fsdata *fsd; + struct dentry *dentry = F_DENTRY(file); + + INIT_LIST_HEAD(&cancellation->list); + + if (WARN_ON(!d_is_reg(dentry))) + return; + + if (WARN_ON(!cancellation->cancel)) + return; + + fsd = READ_ONCE(dentry->d_fsdata); + if (WARN_ON(!fsd || + ((unsigned long)fsd & DEBUGFS_FSDATA_IS_REAL_FOPS_BIT))) + return; + + mutex_lock(&fsd->cancellations_mtx); + list_add(&cancellation->list, &fsd->cancellations); + mutex_unlock(&fsd->cancellations_mtx); + + /* if we're already removing wake it up to cancel */ + if (d_unlinked(dentry)) + complete(&fsd->active_users_drained); +} +EXPORT_SYMBOL_GPL(debugfs_enter_cancellation); + +/** + * debugfs_leave_cancellation - leave cancellation section + * @file: the file being accessed + * @cancellation: the cancellation previously registered with + * debugfs_enter_cancellation() + * + * See the documentation of debugfs_enter_cancellation(). + */ +void debugfs_leave_cancellation(struct file *file, + struct debugfs_cancellation *cancellation) +{ + struct debugfs_fsdata *fsd; + struct dentry *dentry = F_DENTRY(file); + + if (WARN_ON(!d_is_reg(dentry))) + return; + + fsd = READ_ONCE(dentry->d_fsdata); + if (WARN_ON(!fsd || + ((unsigned long)fsd & DEBUGFS_FSDATA_IS_REAL_FOPS_BIT))) + return; + + mutex_lock(&fsd->cancellations_mtx); + if (!list_empty(&cancellation->list)) + list_del(&cancellation->list); + mutex_unlock(&fsd->cancellations_mtx); +} +EXPORT_SYMBOL_GPL(debugfs_leave_cancellation); + /* * Only permit access to world-readable files when the kernel is locked down. * We also need to exclude any file that has ways to write or alter it as root diff --git a/fs/debugfs/inode.c b/fs/debugfs/inode.c index 80f4f000dcc1..d53c2860b03c 100644 --- a/fs/debugfs/inode.c +++ b/fs/debugfs/inode.c @@ -247,6 +247,8 @@ static void debugfs_release_dentry(struct dentry *dentry) lockdep_unregister_key(&fsd->key); kfree(fsd->lock_name); #endif + WARN_ON(!list_empty(&fsd->cancellations)); + mutex_destroy(&fsd->cancellations_mtx); } kfree(fsd); @@ -756,8 +758,36 @@ static void __debugfs_file_removed(struct dentry *dentry) lock_map_acquire(&fsd->lockdep_map); lock_map_release(&fsd->lockdep_map); - if (!refcount_dec_and_test(&fsd->active_users)) + /* if we hit zero, just wait for all to finish */ + if (!refcount_dec_and_test(&fsd->active_users)) { wait_for_completion(&fsd->active_users_drained); + return; + } + + /* if we didn't hit zero, try to cancel any we can */ + while (refcount_read(&fsd->active_users)) { + struct debugfs_cancellation *c; + + /* + * Lock the cancellations. Note that the cancellations + * structs are meant to be on the stack, so we need to + * ensure we either use them here or don't touch them, + * and debugfs_leave_cancellation() will wait for this + * to be finished processing before exiting one. It may + * of course win and remove the cancellation, but then + * chances are we never even got into this bit, we only + * do if the refcount isn't zero already. + */ + mutex_lock(&fsd->cancellations_mtx); + while ((c = list_first_entry_or_null(&fsd->cancellations, + typeof(*c), list))) { + list_del_init(&c->list); + c->cancel(dentry, c->cancel_data); + } + mutex_unlock(&fsd->cancellations_mtx); + + wait_for_completion(&fsd->active_users_drained); + } } static void remove_one(struct dentry *victim) diff --git a/fs/debugfs/internal.h b/fs/debugfs/internal.h index c7d61cfc97d2..0c4c68cf161f 100644 --- a/fs/debugfs/internal.h +++ b/fs/debugfs/internal.h @@ -8,6 +8,7 @@ #ifndef _DEBUGFS_INTERNAL_H_ #define _DEBUGFS_INTERNAL_H_ #include +#include struct file_operations; @@ -29,6 +30,10 @@ struct debugfs_fsdata { struct lock_class_key key; char *lock_name; #endif + + /* protect cancellations */ + struct mutex cancellations_mtx; + struct list_head cancellations; }; }; }; diff --git a/include/linux/debugfs.h b/include/linux/debugfs.h index ea2d919fd9c7..c9c65b132c0f 100644 --- a/include/linux/debugfs.h +++ b/include/linux/debugfs.h @@ -171,6 +171,25 @@ ssize_t debugfs_write_file_bool(struct file *file, const char __user *user_buf, ssize_t debugfs_read_file_str(struct file *file, char __user *user_buf, size_t count, loff_t *ppos); +/** + * struct debugfs_cancellation - cancellation data + * @list: internal, for keeping track + * @cancel: callback to call + * @cancel_data: extra data for the callback to call + */ +struct debugfs_cancellation { + struct list_head list; + void (*cancel)(struct dentry *, void *); + void *cancel_data; +}; + +void __acquires(cancellation) +debugfs_enter_cancellation(struct file *file, + struct debugfs_cancellation *cancellation); +void __releases(cancellation) +debugfs_leave_cancellation(struct file *file, + struct debugfs_cancellation *cancellation); + #else #include -- cgit v1.2.3 From b590b9ae1efc30e52f81d95cdb2519a4c248b965 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 24 Nov 2023 17:25:27 +0100 Subject: wifi: cfg80211: add locked debugfs wrappers Add wrappers for debugfs files that should be called with the wiphy mutex held, while the file is also to be removed under the wiphy mutex. This could otherwise deadlock when a file is trying to acquire the wiphy mutex while the code removing it holds the mutex but waits for the removal. This actually works by pushing the execution of the read or write handler to a wiphy work that can be cancelled using the debugfs cancellation API. Signed-off-by: Johannes Berg --- include/net/cfg80211.h | 46 ++++++++++++++ net/wireless/debugfs.c | 160 +++++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 206 insertions(+) diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index b137a33a1b68..4ecfb06c413d 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -9299,4 +9299,50 @@ bool cfg80211_valid_disable_subchannel_bitmap(u16 *bitmap, */ void cfg80211_links_removed(struct net_device *dev, u16 link_mask); +#ifdef CONFIG_CFG80211_DEBUGFS +/** + * wiphy_locked_debugfs_read - do a locked read in debugfs + * @wiphy: the wiphy to use + * @file: the file being read + * @buf: the buffer to fill and then read from + * @bufsize: size of the buffer + * @userbuf: the user buffer to copy to + * @count: read count + * @ppos: read position + * @handler: the read handler to call (under wiphy lock) + * @data: additional data to pass to the read handler + */ +ssize_t wiphy_locked_debugfs_read(struct wiphy *wiphy, struct file *file, + char *buf, size_t bufsize, + char __user *userbuf, size_t count, + loff_t *ppos, + ssize_t (*handler)(struct wiphy *wiphy, + struct file *file, + char *buf, + size_t bufsize, + void *data), + void *data); + +/** + * wiphy_locked_debugfs_write - do a locked write in debugfs + * @wiphy: the wiphy to use + * @file: the file being written to + * @buf: the buffer to copy the user data to + * @bufsize: size of the buffer + * @userbuf: the user buffer to copy from + * @count: read count + * @handler: the write handler to call (under wiphy lock) + * @data: additional data to pass to the write handler + */ +ssize_t wiphy_locked_debugfs_write(struct wiphy *wiphy, struct file *file, + char *buf, size_t bufsize, + const char __user *userbuf, size_t count, + ssize_t (*handler)(struct wiphy *wiphy, + struct file *file, + char *buf, + size_t count, + void *data), + void *data); +#endif + #endif /* __NET_CFG80211_H */ diff --git a/net/wireless/debugfs.c b/net/wireless/debugfs.c index 0878b162890a..40e49074e2ee 100644 --- a/net/wireless/debugfs.c +++ b/net/wireless/debugfs.c @@ -4,6 +4,7 @@ * * Copyright 2009 Luis R. Rodriguez * Copyright 2007 Johannes Berg + * Copyright (C) 2023 Intel Corporation */ #include @@ -109,3 +110,162 @@ void cfg80211_debugfs_rdev_add(struct cfg80211_registered_device *rdev) DEBUGFS_ADD(long_retry_limit); DEBUGFS_ADD(ht40allow_map); } + +struct debugfs_read_work { + struct wiphy_work work; + ssize_t (*handler)(struct wiphy *wiphy, + struct file *file, + char *buf, + size_t count, + void *data); + struct wiphy *wiphy; + struct file *file; + char *buf; + size_t bufsize; + void *data; + ssize_t ret; + struct completion completion; +}; + +static void wiphy_locked_debugfs_read_work(struct wiphy *wiphy, + struct wiphy_work *work) +{ + struct debugfs_read_work *w = container_of(work, typeof(*w), work); + + w->ret = w->handler(w->wiphy, w->file, w->buf, w->bufsize, w->data); + complete(&w->completion); +} + +static void wiphy_locked_debugfs_read_cancel(struct dentry *dentry, + void *data) +{ + struct debugfs_read_work *w = data; + + wiphy_work_cancel(w->wiphy, &w->work); + complete(&w->completion); +} + +ssize_t wiphy_locked_debugfs_read(struct wiphy *wiphy, struct file *file, + char *buf, size_t bufsize, + char __user *userbuf, size_t count, + loff_t *ppos, + ssize_t (*handler)(struct wiphy *wiphy, + struct file *file, + char *buf, + size_t bufsize, + void *data), + void *data) +{ + struct debugfs_read_work work = { + .handler = handler, + .wiphy = wiphy, + .file = file, + .buf = buf, + .bufsize = bufsize, + .data = data, + .ret = -ENODEV, + .completion = COMPLETION_INITIALIZER_ONSTACK(work.completion), + }; + struct debugfs_cancellation cancellation = { + .cancel = wiphy_locked_debugfs_read_cancel, + .cancel_data = &work, + }; + + /* don't leak stack data or whatever */ + memset(buf, 0, bufsize); + + wiphy_work_init(&work.work, wiphy_locked_debugfs_read_work); + wiphy_work_queue(wiphy, &work.work); + + debugfs_enter_cancellation(file, &cancellation); + wait_for_completion(&work.completion); + debugfs_leave_cancellation(file, &cancellation); + + if (work.ret < 0) + return work.ret; + + if (WARN_ON(work.ret > bufsize)) + return -EINVAL; + + return simple_read_from_buffer(userbuf, count, ppos, buf, work.ret); +} +EXPORT_SYMBOL_GPL(wiphy_locked_debugfs_read); + +struct debugfs_write_work { + struct wiphy_work work; + ssize_t (*handler)(struct wiphy *wiphy, + struct file *file, + char *buf, + size_t count, + void *data); + struct wiphy *wiphy; + struct file *file; + char *buf; + size_t count; + void *data; + ssize_t ret; + struct completion completion; +}; + +static void wiphy_locked_debugfs_write_work(struct wiphy *wiphy, + struct wiphy_work *work) +{ + struct debugfs_write_work *w = container_of(work, typeof(*w), work); + + w->ret = w->handler(w->wiphy, w->file, w->buf, w->count, w->data); + complete(&w->completion); +} + +static void wiphy_locked_debugfs_write_cancel(struct dentry *dentry, + void *data) +{ + struct debugfs_write_work *w = data; + + wiphy_work_cancel(w->wiphy, &w->work); + complete(&w->completion); +} + +ssize_t wiphy_locked_debugfs_write(struct wiphy *wiphy, + struct file *file, char *buf, size_t bufsize, + const char __user *userbuf, size_t count, + ssize_t (*handler)(struct wiphy *wiphy, + struct file *file, + char *buf, + size_t count, + void *data), + void *data) +{ + struct debugfs_write_work work = { + .handler = handler, + .wiphy = wiphy, + .file = file, + .buf = buf, + .count = count, + .data = data, + .ret = -ENODEV, + .completion = COMPLETION_INITIALIZER_ONSTACK(work.completion), + }; + struct debugfs_cancellation cancellation = { + .cancel = wiphy_locked_debugfs_write_cancel, + .cancel_data = &work, + }; + + /* mostly used for strings so enforce NUL-termination for safety */ + if (count >= bufsize) + return -EINVAL; + + memset(buf, 0, bufsize); + + if (copy_from_user(buf, userbuf, count)) + return -EFAULT; + + wiphy_work_init(&work.work, wiphy_locked_debugfs_write_work); + wiphy_work_queue(wiphy, &work.work); + + debugfs_enter_cancellation(file, &cancellation); + wait_for_completion(&work.completion); + debugfs_leave_cancellation(file, &cancellation); + + return work.ret; +} +EXPORT_SYMBOL_GPL(wiphy_locked_debugfs_write); -- cgit v1.2.3 From 3d529cd11f2b6c1c3b8e084269152eb30fbb96f5 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 24 Nov 2023 17:25:28 +0100 Subject: wifi: mac80211: use wiphy locked debugfs helpers for agg_status The read is currently with RCU and the write can deadlock, convert both for the sake of illustration. Make mac80211 depend on cfg80211 debugfs to get the helpers, but mac80211 debugfs without it does nothing anyway. This also required some adjustments in ath9k. Signed-off-by: Johannes Berg --- drivers/net/wireless/ath/ath9k/Kconfig | 4 +- net/mac80211/Kconfig | 2 +- net/mac80211/debugfs_sta.c | 74 +++++++++++++++++++--------------- 3 files changed, 44 insertions(+), 36 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/Kconfig b/drivers/net/wireless/ath/ath9k/Kconfig index e150d82eddb6..0c47be06c153 100644 --- a/drivers/net/wireless/ath/ath9k/Kconfig +++ b/drivers/net/wireless/ath/ath9k/Kconfig @@ -57,8 +57,7 @@ config ATH9K_AHB config ATH9K_DEBUGFS bool "Atheros ath9k debugging" - depends on ATH9K && DEBUG_FS - select MAC80211_DEBUGFS + depends on ATH9K && DEBUG_FS && MAC80211_DEBUGFS select ATH9K_COMMON_DEBUG help Say Y, if you need access to ath9k's statistics for @@ -70,7 +69,6 @@ config ATH9K_DEBUGFS config ATH9K_STATION_STATISTICS bool "Detailed station statistics" depends on ATH9K && ATH9K_DEBUGFS && DEBUG_FS - select MAC80211_DEBUGFS default n help This option enables detailed statistics for association stations. diff --git a/net/mac80211/Kconfig b/net/mac80211/Kconfig index 037ab74f5ade..cb0291decf2e 100644 --- a/net/mac80211/Kconfig +++ b/net/mac80211/Kconfig @@ -88,7 +88,7 @@ config MAC80211_LEDS config MAC80211_DEBUGFS bool "Export mac80211 internals in DebugFS" - depends on MAC80211 && DEBUG_FS + depends on MAC80211 && CFG80211_DEBUGFS help Select this to see extensive information about the internal state of mac80211 in debugfs. diff --git a/net/mac80211/debugfs_sta.c b/net/mac80211/debugfs_sta.c index 06e3613bf46b..5bf507ebb096 100644 --- a/net/mac80211/debugfs_sta.c +++ b/net/mac80211/debugfs_sta.c @@ -312,23 +312,14 @@ static ssize_t sta_aql_write(struct file *file, const char __user *userbuf, STA_OPS_RW(aql); -static ssize_t sta_agg_status_read(struct file *file, char __user *userbuf, - size_t count, loff_t *ppos) +static ssize_t sta_agg_status_do_read(struct wiphy *wiphy, struct file *file, + char *buf, size_t bufsz, void *data) { - char *buf, *p; - ssize_t bufsz = 71 + IEEE80211_NUM_TIDS * 40; + struct sta_info *sta = data; + char *p = buf; int i; - struct sta_info *sta = file->private_data; struct tid_ampdu_rx *tid_rx; struct tid_ampdu_tx *tid_tx; - ssize_t ret; - - buf = kzalloc(bufsz, GFP_KERNEL); - if (!buf) - return -ENOMEM; - p = buf; - - rcu_read_lock(); p += scnprintf(p, bufsz + buf - p, "next dialog_token: %#02x\n", sta->ampdu_mlme.dialog_token_allocator + 1); @@ -338,8 +329,8 @@ static ssize_t sta_agg_status_read(struct file *file, char __user *userbuf, for (i = 0; i < IEEE80211_NUM_TIDS; i++) { bool tid_rx_valid; - tid_rx = rcu_dereference(sta->ampdu_mlme.tid_rx[i]); - tid_tx = rcu_dereference(sta->ampdu_mlme.tid_tx[i]); + tid_rx = wiphy_dereference(wiphy, sta->ampdu_mlme.tid_rx[i]); + tid_tx = wiphy_dereference(wiphy, sta->ampdu_mlme.tid_tx[i]); tid_rx_valid = test_bit(i, sta->ampdu_mlme.agg_session_valid); p += scnprintf(p, bufsz + buf - p, "%02d", i); @@ -358,31 +349,39 @@ static ssize_t sta_agg_status_read(struct file *file, char __user *userbuf, tid_tx ? skb_queue_len(&tid_tx->pending) : 0); p += scnprintf(p, bufsz + buf - p, "\n"); } - rcu_read_unlock(); - ret = simple_read_from_buffer(userbuf, count, ppos, buf, p - buf); + return p - buf; +} + +static ssize_t sta_agg_status_read(struct file *file, char __user *userbuf, + size_t count, loff_t *ppos) +{ + struct sta_info *sta = file->private_data; + struct wiphy *wiphy = sta->local->hw.wiphy; + size_t bufsz = 71 + IEEE80211_NUM_TIDS * 40; + char *buf = kmalloc(bufsz, GFP_KERNEL); + ssize_t ret; + + if (!buf) + return -ENOMEM; + + ret = wiphy_locked_debugfs_read(wiphy, file, buf, bufsz, + userbuf, count, ppos, + sta_agg_status_do_read, sta); kfree(buf); + return ret; } -static ssize_t sta_agg_status_write(struct file *file, const char __user *userbuf, - size_t count, loff_t *ppos) +static ssize_t sta_agg_status_do_write(struct wiphy *wiphy, struct file *file, + char *buf, size_t count, void *data) { - char _buf[25] = {}, *buf = _buf; - struct sta_info *sta = file->private_data; + struct sta_info *sta = data; bool start, tx; unsigned long tid; - char *pos; + char *pos = buf; int ret, timeout = 5000; - if (count > sizeof(_buf)) - return -EINVAL; - - if (copy_from_user(buf, userbuf, count)) - return -EFAULT; - - buf[sizeof(_buf) - 1] = '\0'; - pos = buf; buf = strsep(&pos, " "); if (!buf) return -EINVAL; @@ -420,7 +419,6 @@ static ssize_t sta_agg_status_write(struct file *file, const char __user *userbu if (ret || tid >= IEEE80211_NUM_TIDS) return -EINVAL; - wiphy_lock(sta->local->hw.wiphy); if (tx) { if (start) ret = ieee80211_start_tx_ba_session(&sta->sta, tid, @@ -432,10 +430,22 @@ static ssize_t sta_agg_status_write(struct file *file, const char __user *userbu 3, true); ret = 0; } - wiphy_unlock(sta->local->hw.wiphy); return ret ?: count; } + +static ssize_t sta_agg_status_write(struct file *file, + const char __user *userbuf, + size_t count, loff_t *ppos) +{ + struct sta_info *sta = file->private_data; + struct wiphy *wiphy = sta->local->hw.wiphy; + char _buf[26]; + + return wiphy_locked_debugfs_write(wiphy, file, _buf, sizeof(_buf), + userbuf, count, + sta_agg_status_do_write, sta); +} STA_OPS_RW(agg_status); /* link sta attributes */ -- cgit v1.2.3 From 4ded3bfe1db655367642aadba91aee770cbab317 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 24 Nov 2023 17:25:29 +0100 Subject: wifi: mac80211: use wiphy locked debugfs for sdata/link The debugfs files for netdevs (sdata) and links are removed with the wiphy mutex held, which may deadlock. Use the new wiphy locked debugfs to avoid that. Signed-off-by: Johannes Berg --- net/mac80211/debugfs_netdev.c | 150 +++++++++++++++++++++++++++++------------- 1 file changed, 105 insertions(+), 45 deletions(-) diff --git a/net/mac80211/debugfs_netdev.c b/net/mac80211/debugfs_netdev.c index ec91e131b29e..80aeb25f1b68 100644 --- a/net/mac80211/debugfs_netdev.c +++ b/net/mac80211/debugfs_netdev.c @@ -22,88 +22,148 @@ #include "debugfs_netdev.h" #include "driver-ops.h" +struct ieee80211_if_read_sdata_data { + ssize_t (*format)(const struct ieee80211_sub_if_data *, char *, int); + struct ieee80211_sub_if_data *sdata; +}; + +static ssize_t ieee80211_if_read_sdata_handler(struct wiphy *wiphy, + struct file *file, + char *buf, + size_t bufsize, + void *data) +{ + struct ieee80211_if_read_sdata_data *d = data; + + return d->format(d->sdata, buf, bufsize); +} + static ssize_t ieee80211_if_read_sdata( - struct ieee80211_sub_if_data *sdata, + struct file *file, char __user *userbuf, size_t count, loff_t *ppos, ssize_t (*format)(const struct ieee80211_sub_if_data *sdata, char *, int)) { + struct ieee80211_sub_if_data *sdata = file->private_data; + struct ieee80211_if_read_sdata_data data = { + .format = format, + .sdata = sdata, + }; char buf[200]; - ssize_t ret = -EINVAL; - wiphy_lock(sdata->local->hw.wiphy); - ret = (*format)(sdata, buf, sizeof(buf)); - wiphy_unlock(sdata->local->hw.wiphy); + return wiphy_locked_debugfs_read(sdata->local->hw.wiphy, + file, buf, sizeof(buf), + userbuf, count, ppos, + ieee80211_if_read_sdata_handler, + &data); +} - if (ret >= 0) - ret = simple_read_from_buffer(userbuf, count, ppos, buf, ret); +struct ieee80211_if_write_sdata_data { + ssize_t (*write)(struct ieee80211_sub_if_data *, const char *, int); + struct ieee80211_sub_if_data *sdata; +}; + +static ssize_t ieee80211_if_write_sdata_handler(struct wiphy *wiphy, + struct file *file, + char *buf, + size_t count, + void *data) +{ + struct ieee80211_if_write_sdata_data *d = data; - return ret; + return d->write(d->sdata, buf, count); } static ssize_t ieee80211_if_write_sdata( - struct ieee80211_sub_if_data *sdata, + struct file *file, const char __user *userbuf, size_t count, loff_t *ppos, ssize_t (*write)(struct ieee80211_sub_if_data *sdata, const char *, int)) { + struct ieee80211_sub_if_data *sdata = file->private_data; + struct ieee80211_if_write_sdata_data data = { + .write = write, + .sdata = sdata, + }; char buf[64]; - ssize_t ret; - if (count >= sizeof(buf)) - return -E2BIG; + return wiphy_locked_debugfs_write(sdata->local->hw.wiphy, + file, buf, sizeof(buf), + userbuf, count, + ieee80211_if_write_sdata_handler, + &data); +} - if (copy_from_user(buf, userbuf, count)) - return -EFAULT; - buf[count] = '\0'; +struct ieee80211_if_read_link_data { + ssize_t (*format)(const struct ieee80211_link_data *, char *, int); + struct ieee80211_link_data *link; +}; - wiphy_lock(sdata->local->hw.wiphy); - ret = (*write)(sdata, buf, count); - wiphy_unlock(sdata->local->hw.wiphy); +static ssize_t ieee80211_if_read_link_handler(struct wiphy *wiphy, + struct file *file, + char *buf, + size_t bufsize, + void *data) +{ + struct ieee80211_if_read_link_data *d = data; - return ret; + return d->format(d->link, buf, bufsize); } static ssize_t ieee80211_if_read_link( - struct ieee80211_link_data *link, + struct file *file, char __user *userbuf, size_t count, loff_t *ppos, ssize_t (*format)(const struct ieee80211_link_data *link, char *, int)) { + struct ieee80211_link_data *link = file->private_data; + struct ieee80211_if_read_link_data data = { + .format = format, + .link = link, + }; char buf[200]; - ssize_t ret = -EINVAL; - wiphy_lock(link->sdata->local->hw.wiphy); - ret = (*format)(link, buf, sizeof(buf)); - wiphy_unlock(link->sdata->local->hw.wiphy); + return wiphy_locked_debugfs_read(link->sdata->local->hw.wiphy, + file, buf, sizeof(buf), + userbuf, count, ppos, + ieee80211_if_read_link_handler, + &data); +} + +struct ieee80211_if_write_link_data { + ssize_t (*write)(struct ieee80211_link_data *, const char *, int); + struct ieee80211_link_data *link; +}; - if (ret >= 0) - ret = simple_read_from_buffer(userbuf, count, ppos, buf, ret); +static ssize_t ieee80211_if_write_link_handler(struct wiphy *wiphy, + struct file *file, + char *buf, + size_t count, + void *data) +{ + struct ieee80211_if_write_sdata_data *d = data; - return ret; + return d->write(d->sdata, buf, count); } static ssize_t ieee80211_if_write_link( - struct ieee80211_link_data *link, + struct file *file, const char __user *userbuf, size_t count, loff_t *ppos, ssize_t (*write)(struct ieee80211_link_data *link, const char *, int)) { + struct ieee80211_link_data *link = file->private_data; + struct ieee80211_if_write_link_data data = { + .write = write, + .link = link, + }; char buf[64]; - ssize_t ret; - - if (count >= sizeof(buf)) - return -E2BIG; - - if (copy_from_user(buf, userbuf, count)) - return -EFAULT; - buf[count] = '\0'; - - wiphy_lock(link->sdata->local->hw.wiphy); - ret = (*write)(link, buf, count); - wiphy_unlock(link->sdata->local->hw.wiphy); - return ret; + return wiphy_locked_debugfs_write(link->sdata->local->hw.wiphy, + file, buf, sizeof(buf), + userbuf, count, + ieee80211_if_write_link_handler, + &data); } #define IEEE80211_IF_FMT(name, type, field, format_string) \ @@ -173,7 +233,7 @@ static ssize_t ieee80211_if_read_##name(struct file *file, \ char __user *userbuf, \ size_t count, loff_t *ppos) \ { \ - return ieee80211_if_read_sdata(file->private_data, \ + return ieee80211_if_read_sdata(file, \ userbuf, count, ppos, \ ieee80211_if_fmt_##name); \ } @@ -183,7 +243,7 @@ static ssize_t ieee80211_if_write_##name(struct file *file, \ const char __user *userbuf, \ size_t count, loff_t *ppos) \ { \ - return ieee80211_if_write_sdata(file->private_data, userbuf, \ + return ieee80211_if_write_sdata(file, userbuf, \ count, ppos, \ ieee80211_if_parse_##name); \ } @@ -211,7 +271,7 @@ static ssize_t ieee80211_if_read_##name(struct file *file, \ char __user *userbuf, \ size_t count, loff_t *ppos) \ { \ - return ieee80211_if_read_link(file->private_data, \ + return ieee80211_if_read_link(file, \ userbuf, count, ppos, \ ieee80211_if_fmt_##name); \ } @@ -221,7 +281,7 @@ static ssize_t ieee80211_if_write_##name(struct file *file, \ const char __user *userbuf, \ size_t count, loff_t *ppos) \ { \ - return ieee80211_if_write_link(file->private_data, userbuf, \ + return ieee80211_if_write_link(file, userbuf, \ count, ppos, \ ieee80211_if_parse_##name); \ } -- cgit v1.2.3 From 06f76e464ac81c6915430b7155769ea4ef16efe4 Mon Sep 17 00:00:00 2001 From: Michael Walle Date: Thu, 23 Nov 2023 12:02:02 +0100 Subject: phy: mediatek: mipi: mt8183: fix minimal supported frequency The lowest supported clock frequency of the PHY is 125MHz (see also mtk_mipi_tx_pll_enable()), but the clamping in .round_rate() has the wrong minimal value, which will make the .enable() op return -EINVAL on low frequencies. Fix the minimal clamping value. Fixes: efda51a58b4a ("drm/mediatek: add mipi_tx driver for mt8183") Signed-off-by: Michael Walle Reviewed-by: AngeloGioacchino Del Regno Link: https://lore.kernel.org/r/20231123110202.2025585-1-mwalle@kernel.org Signed-off-by: Vinod Koul --- drivers/phy/mediatek/phy-mtk-mipi-dsi-mt8183.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/phy/mediatek/phy-mtk-mipi-dsi-mt8183.c b/drivers/phy/mediatek/phy-mtk-mipi-dsi-mt8183.c index f021ec5a70e5..553725e1269c 100644 --- a/drivers/phy/mediatek/phy-mtk-mipi-dsi-mt8183.c +++ b/drivers/phy/mediatek/phy-mtk-mipi-dsi-mt8183.c @@ -100,7 +100,7 @@ static void mtk_mipi_tx_pll_disable(struct clk_hw *hw) static long mtk_mipi_tx_pll_round_rate(struct clk_hw *hw, unsigned long rate, unsigned long *prate) { - return clamp_val(rate, 50000000, 1600000000); + return clamp_val(rate, 125000000, 1600000000); } static const struct clk_ops mtk_mipi_tx_pll_ops = { -- cgit v1.2.3 From 2a9c713825b3127ece11984abf973672c9779518 Mon Sep 17 00:00:00 2001 From: Su Hui Date: Mon, 20 Nov 2023 17:10:47 +0800 Subject: phy: sunplus: return negative error code in sp_usb_phy_probe devm_phy_create() return negative error code, 'ret' should be 'PTR_ERR(phy)' rather than '-PTR_ERR(phy)'. Fixes: 99d9ccd97385 ("phy: usb: Add USB2.0 phy driver for Sunplus SP7021") Signed-off-by: Su Hui Link: https://lore.kernel.org/r/20231120091046.163781-1-suhui@nfschina.com Signed-off-by: Vinod Koul --- drivers/phy/sunplus/phy-sunplus-usb2.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/phy/sunplus/phy-sunplus-usb2.c b/drivers/phy/sunplus/phy-sunplus-usb2.c index 0efe74ac9c6a..637a5fbae6d9 100644 --- a/drivers/phy/sunplus/phy-sunplus-usb2.c +++ b/drivers/phy/sunplus/phy-sunplus-usb2.c @@ -275,7 +275,7 @@ static int sp_usb_phy_probe(struct platform_device *pdev) phy = devm_phy_create(&pdev->dev, NULL, &sp_uphy_ops); if (IS_ERR(phy)) { - ret = -PTR_ERR(phy); + ret = PTR_ERR(phy); return ret; } -- cgit v1.2.3 From be6f9a39969a4ad01f0051a9b94af6e7f4d2d7ac Mon Sep 17 00:00:00 2001 From: Alexander Usyskin Date: Sun, 26 Nov 2023 11:24:49 +0200 Subject: mei: pxp: fix mei_pxp_send_message return value mei_pxp_send_message() should return zero on success and cannot propagate number of bytes as returned by internally called mei_cldev_send(). Fixes: ee5cb39348e6 ("mei: pxp: recover from recv fail under memory pressure") Signed-off-by: Alexander Usyskin Signed-off-by: Tomas Winkler Link: https://lore.kernel.org/r/20231126092449.88310-1-tomas.winkler@intel.com Signed-off-by: Greg Kroah-Hartman --- drivers/misc/mei/pxp/mei_pxp.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/misc/mei/pxp/mei_pxp.c b/drivers/misc/mei/pxp/mei_pxp.c index f77d78fa5054..787c6a27a4be 100644 --- a/drivers/misc/mei/pxp/mei_pxp.c +++ b/drivers/misc/mei/pxp/mei_pxp.c @@ -84,9 +84,10 @@ mei_pxp_send_message(struct device *dev, const void *message, size_t size, unsig byte = ret; break; } + return byte; } - return byte; + return 0; } /** -- cgit v1.2.3 From 8f06aee8089cf42fd99a20184501bd1347ce61b9 Mon Sep 17 00:00:00 2001 From: Su Hui Date: Mon, 20 Nov 2023 17:55:23 +0800 Subject: misc: mei: client.c: return negative error code in mei_cl_write mei_msg_hdr_init() return negative error code, rets should be 'PTR_ERR(mei_hdr)' rather than '-PTR_ERR(mei_hdr)'. Fixes: 0cd7c01a60f8 ("mei: add support for mei extended header.") Signed-off-by: Su Hui Link: https://lore.kernel.org/r/20231120095523.178385-1-suhui@nfschina.com Signed-off-by: Greg Kroah-Hartman --- drivers/misc/mei/client.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/misc/mei/client.c b/drivers/misc/mei/client.c index 9c8fc87938a7..7ea80779a0e2 100644 --- a/drivers/misc/mei/client.c +++ b/drivers/misc/mei/client.c @@ -2011,7 +2011,7 @@ ssize_t mei_cl_write(struct mei_cl *cl, struct mei_cl_cb *cb, unsigned long time mei_hdr = mei_msg_hdr_init(cb); if (IS_ERR(mei_hdr)) { - rets = -PTR_ERR(mei_hdr); + rets = PTR_ERR(mei_hdr); mei_hdr = NULL; goto err; } -- cgit v1.2.3 From ee6236027218f8531916f1c5caa5dc330379f287 Mon Sep 17 00:00:00 2001 From: Su Hui Date: Mon, 20 Nov 2023 17:55:26 +0800 Subject: misc: mei: client.c: fix problem of return '-EOVERFLOW' in mei_cl_write Clang static analyzer complains that value stored to 'rets' is never read.Let 'buf_len = -EOVERFLOW' to make sure we can return '-EOVERFLOW'. Fixes: 8c8d964ce90f ("mei: move hbuf_depth from the mei device to the hw modules") Signed-off-by: Su Hui Link: https://lore.kernel.org/r/20231120095523.178385-2-suhui@nfschina.com Signed-off-by: Greg Kroah-Hartman --- drivers/misc/mei/client.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/misc/mei/client.c b/drivers/misc/mei/client.c index 7ea80779a0e2..9d090fa07516 100644 --- a/drivers/misc/mei/client.c +++ b/drivers/misc/mei/client.c @@ -2032,7 +2032,7 @@ ssize_t mei_cl_write(struct mei_cl *cl, struct mei_cl_cb *cb, unsigned long time hbuf_slots = mei_hbuf_empty_slots(dev); if (hbuf_slots < 0) { - rets = -EOVERFLOW; + buf_len = -EOVERFLOW; goto out; } -- cgit v1.2.3 From 0cb19e50a911aaadf49eed120392e429d6e1fa0c Mon Sep 17 00:00:00 2001 From: Ulf Hansson Date: Mon, 27 Nov 2023 14:50:33 +0100 Subject: pmdomain: arm: Avoid polling for scmi_perf_domain It was a mistake to prefer polling based mode when setting a performance level for a domain. Let's instead rely on the protocol to decide what is best and thus avoid polling when possible. Reported-by: Nikunj Kela Fixes: 2af23ceb8624 ("pmdomain: arm: Add the SCMI performance domain") Signed-off-by: Ulf Hansson Reviewed-by: Sudeep Holla Link: https://lore.kernel.org/r/20231127135033.136442-1-ulf.hansson@linaro.org --- drivers/pmdomain/arm/scmi_perf_domain.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/pmdomain/arm/scmi_perf_domain.c b/drivers/pmdomain/arm/scmi_perf_domain.c index bc3f78abb6da..709bbc448fad 100644 --- a/drivers/pmdomain/arm/scmi_perf_domain.c +++ b/drivers/pmdomain/arm/scmi_perf_domain.c @@ -35,7 +35,7 @@ scmi_pd_set_perf_state(struct generic_pm_domain *genpd, unsigned int state) if (!state) return -EINVAL; - ret = pd->perf_ops->level_set(pd->ph, pd->domain_id, state, true); + ret = pd->perf_ops->level_set(pd->ph, pd->domain_id, state, false); if (ret) dev_warn(&genpd->dev, "Failed with %d when trying to set %d perf level", ret, state); -- cgit v1.2.3 From 820d070feb668aab5bc9413c285a1dda2a70e076 Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Fri, 24 Nov 2023 21:02:01 -0700 Subject: io_uring: don't allow discontig pages for IORING_SETUP_NO_MMAP io_sqes_map() is used rather than io_mem_alloc(), if the application passes in memory for mapping rather than have the kernel allocate it and then mmap(2) the ranges. This then calls __io_uaddr_map() to perform the page mapping and pinning, which checks if we end up with the same pages, if more than one page is mapped. But this check is incorrect and only checks if the first and last pages are the same, where it really should be checking if the mapped pages are contigous. This allows mapping a single normal page, or a huge page range. Down the line we can add support for remapping pages to be virtually contigous, which is really all that io_uring cares about. Cc: stable@vger.kernel.org Fixes: 03d89a2de25b ("io_uring: support for user allocated memory for rings/sqes") Reported-by: Jann Horn Signed-off-by: Jens Axboe --- io_uring/io_uring.c | 39 +++++++++++++++++++++------------------ 1 file changed, 21 insertions(+), 18 deletions(-) diff --git a/io_uring/io_uring.c b/io_uring/io_uring.c index ed254076c723..b45abfd75415 100644 --- a/io_uring/io_uring.c +++ b/io_uring/io_uring.c @@ -2697,6 +2697,7 @@ static void *__io_uaddr_map(struct page ***pages, unsigned short *npages, { struct page **page_array; unsigned int nr_pages; + void *page_addr; int ret, i; *npages = 0; @@ -2718,27 +2719,29 @@ err: io_pages_free(&page_array, ret > 0 ? ret : 0); return ret < 0 ? ERR_PTR(ret) : ERR_PTR(-EFAULT); } - /* - * Should be a single page. If the ring is small enough that we can - * use a normal page, that is fine. If we need multiple pages, then - * userspace should use a huge page. That's the only way to guarantee - * that we get contigious memory, outside of just being lucky or - * (currently) having low memory fragmentation. - */ - if (page_array[0] != page_array[ret - 1]) - goto err; - /* - * Can't support mapping user allocated ring memory on 32-bit archs - * where it could potentially reside in highmem. Just fail those with - * -EINVAL, just like we did on kernels that didn't support this - * feature. - */ + page_addr = page_address(page_array[0]); for (i = 0; i < nr_pages; i++) { - if (PageHighMem(page_array[i])) { - ret = -EINVAL; + ret = -EINVAL; + + /* + * Can't support mapping user allocated ring memory on 32-bit + * archs where it could potentially reside in highmem. Just + * fail those with -EINVAL, just like we did on kernels that + * didn't support this feature. + */ + if (PageHighMem(page_array[i])) goto err; - } + + /* + * No support for discontig pages for now, should either be a + * single normal page, or a huge page. Later on we can add + * support for remapping discontig pages, for now we will + * just fail them with EINVAL. + */ + if (page_address(page_array[i]) != page_addr) + goto err; + page_addr += PAGE_SIZE; } *pages = page_array; -- cgit v1.2.3 From 1d5e8f4bf06da86b71cc9169110d1a0e1e7af337 Mon Sep 17 00:00:00 2001 From: Liu Ying Date: Mon, 27 Nov 2023 13:14:13 +0800 Subject: driver core: Export device_is_dependent() to modules Export device_is_dependent() since the drm_kms_helper module is starting to use it. Signed-off-by: Liu Ying Signed-off-by: Linus Walleij Link: https://patchwork.freedesktop.org/patch/msgid/20231127051414.3783108-2-victor.liu@nxp.com --- drivers/base/core.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/base/core.c b/drivers/base/core.c index 67ba592afc77..bfd2bf0364b7 100644 --- a/drivers/base/core.c +++ b/drivers/base/core.c @@ -328,6 +328,7 @@ int device_is_dependent(struct device *dev, void *target) } return ret; } +EXPORT_SYMBOL_GPL(device_is_dependent); static void device_link_init_status(struct device_link *link, struct device *consumer, -- cgit v1.2.3 From 7b4c93a50a2ebbbaf656cc4fa6aca74a6166d85b Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Mon, 27 Nov 2023 13:16:58 +0200 Subject: ALSA: hda: intel-nhlt: Ignore vbps when looking for DMIC 32 bps format When looking up DMIC blob from the NHLT table and the format is 32 bits, ignore the vbps matching for 32 bps for DMIC since some NHLT table have the vbps as 24, some have it as 32. The DMIC hardware supports only one type of 32 bit sample size, which is 24 bit sampling on the MSB side and bits[1:0] is used for indicating the channel number. Signed-off-by: Peter Ujfalusi Reviewed-by: Kai Vehmanen Reviewed-by: Pierre-Louis Bossart Reviewed-by: Ranjani Sridharan Link: https://lore.kernel.org/r/20231127111658.17275-1-peter.ujfalusi@linux.intel.com Signed-off-by: Takashi Iwai --- sound/hda/intel-nhlt.c | 33 +++++++++++++++++++++++++++++---- 1 file changed, 29 insertions(+), 4 deletions(-) diff --git a/sound/hda/intel-nhlt.c b/sound/hda/intel-nhlt.c index 2c4dfc0b7e34..696a958d93e9 100644 --- a/sound/hda/intel-nhlt.c +++ b/sound/hda/intel-nhlt.c @@ -238,7 +238,7 @@ EXPORT_SYMBOL(intel_nhlt_ssp_mclk_mask); static struct nhlt_specific_cfg * nhlt_get_specific_cfg(struct device *dev, struct nhlt_fmt *fmt, u8 num_ch, - u32 rate, u8 vbps, u8 bps) + u32 rate, u8 vbps, u8 bps, bool ignore_vbps) { struct nhlt_fmt_cfg *cfg = fmt->fmt_config; struct wav_fmt *wfmt; @@ -255,8 +255,12 @@ nhlt_get_specific_cfg(struct device *dev, struct nhlt_fmt *fmt, u8 num_ch, dev_dbg(dev, "Endpoint format: ch=%d fmt=%d/%d rate=%d\n", wfmt->channels, _vbps, _bps, wfmt->samples_per_sec); + /* + * When looking for exact match of configuration ignore the vbps + * from NHLT table when ignore_vbps is true + */ if (wfmt->channels == num_ch && wfmt->samples_per_sec == rate && - vbps == _vbps && bps == _bps) + (ignore_vbps || vbps == _vbps) && bps == _bps) return &cfg->config; cfg = (struct nhlt_fmt_cfg *)(cfg->config.caps + cfg->config.size); @@ -289,6 +293,7 @@ intel_nhlt_get_endpoint_blob(struct device *dev, struct nhlt_acpi_table *nhlt, { struct nhlt_specific_cfg *cfg; struct nhlt_endpoint *epnt; + bool ignore_vbps = false; struct nhlt_fmt *fmt; int i; @@ -298,7 +303,26 @@ intel_nhlt_get_endpoint_blob(struct device *dev, struct nhlt_acpi_table *nhlt, dev_dbg(dev, "Looking for configuration:\n"); dev_dbg(dev, " vbus_id=%d link_type=%d dir=%d, dev_type=%d\n", bus_id, link_type, dir, dev_type); - dev_dbg(dev, " ch=%d fmt=%d/%d rate=%d\n", num_ch, vbps, bps, rate); + if (link_type == NHLT_LINK_DMIC && bps == 32 && (vbps == 24 || vbps == 32)) { + /* + * The DMIC hardware supports only one type of 32 bits sample + * size, which is 24 bit sampling on the MSB side and bits[1:0] + * are used for indicating the channel number. + * It has been observed that some NHLT tables have the vbps + * specified as 32 while some uses 24. + * The format these variations describe are identical, the + * hardware is configured and behaves the same way. + * Note: when the samples assumed to be vbps=32 then the 'noise' + * introduced by the lower two bits (channel number) have no + * real life implication on audio quality. + */ + dev_dbg(dev, + " ch=%d fmt=%d rate=%d (vbps is ignored for DMIC 32bit format)\n", + num_ch, bps, rate); + ignore_vbps = true; + } else { + dev_dbg(dev, " ch=%d fmt=%d/%d rate=%d\n", num_ch, vbps, bps, rate); + } dev_dbg(dev, "Endpoint count=%d\n", nhlt->endpoint_count); epnt = (struct nhlt_endpoint *)nhlt->desc; @@ -307,7 +331,8 @@ intel_nhlt_get_endpoint_blob(struct device *dev, struct nhlt_acpi_table *nhlt, if (nhlt_check_ep_match(dev, epnt, bus_id, link_type, dir, dev_type)) { fmt = (struct nhlt_fmt *)(epnt->config.caps + epnt->config.size); - cfg = nhlt_get_specific_cfg(dev, fmt, num_ch, rate, vbps, bps); + cfg = nhlt_get_specific_cfg(dev, fmt, num_ch, rate, + vbps, bps, ignore_vbps); if (cfg) return cfg; } -- cgit v1.2.3 From 91aeb563bd4332e2988f8c0f64f125c4ecb5bcb3 Mon Sep 17 00:00:00 2001 From: Brett Creeley Date: Wed, 22 Nov 2023 11:25:31 -0800 Subject: vfio/pds: Fix mutex lock->magic != lock warning The following BUG was found when running on a kernel with CONFIG_DEBUG_MUTEXES=y set: DEBUG_LOCKS_WARN_ON(lock->magic != lock) RIP: 0010:mutex_trylock+0x10d/0x120 Call Trace: ? __warn+0x85/0x140 ? mutex_trylock+0x10d/0x120 ? report_bug+0xfc/0x1e0 ? handle_bug+0x3f/0x70 ? exc_invalid_op+0x17/0x70 ? asm_exc_invalid_op+0x1a/0x20 ? mutex_trylock+0x10d/0x120 ? mutex_trylock+0x10d/0x120 pds_vfio_reset+0x3a/0x60 [pds_vfio_pci] pci_reset_function+0x4b/0x70 reset_store+0x5b/0xa0 kernfs_fop_write_iter+0x137/0x1d0 vfs_write+0x2de/0x410 ksys_write+0x5d/0xd0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x6e/0xd8 As shown, lock->magic != lock. This is because mutex_init(&pds_vfio->state_mutex) is called in the VFIO open path. So, if a reset is initiated before the VFIO device is opened the mutex will have never been initialized. Fix this by calling mutex_init(&pds_vfio->state_mutex) in the VFIO init path. Also, don't destroy the mutex on close because the device may be re-opened, which would cause mutex to be uninitialized. Fix this by implementing a driver specific vfio_device_ops.release callback that destroys the mutex before calling vfio_pci_core_release_dev(). Fixes: bb500dbe2ac6 ("vfio/pds: Add VFIO live migration support") Signed-off-by: Brett Creeley Reviewed-by: Shannon Nelson Link: https://lore.kernel.org/r/20231122192532.25791-2-brett.creeley@amd.com Signed-off-by: Alex Williamson --- drivers/vfio/pci/pds/vfio_dev.c | 16 +++++++++++++--- 1 file changed, 13 insertions(+), 3 deletions(-) diff --git a/drivers/vfio/pci/pds/vfio_dev.c b/drivers/vfio/pci/pds/vfio_dev.c index 649b18ee394b..8c9fb87b13e1 100644 --- a/drivers/vfio/pci/pds/vfio_dev.c +++ b/drivers/vfio/pci/pds/vfio_dev.c @@ -155,6 +155,8 @@ static int pds_vfio_init_device(struct vfio_device *vdev) pds_vfio->vf_id = vf_id; + mutex_init(&pds_vfio->state_mutex); + vdev->migration_flags = VFIO_MIGRATION_STOP_COPY | VFIO_MIGRATION_P2P; vdev->mig_ops = &pds_vfio_lm_ops; vdev->log_ops = &pds_vfio_log_ops; @@ -168,6 +170,16 @@ static int pds_vfio_init_device(struct vfio_device *vdev) return 0; } +static void pds_vfio_release_device(struct vfio_device *vdev) +{ + struct pds_vfio_pci_device *pds_vfio = + container_of(vdev, struct pds_vfio_pci_device, + vfio_coredev.vdev); + + mutex_destroy(&pds_vfio->state_mutex); + vfio_pci_core_release_dev(vdev); +} + static int pds_vfio_open_device(struct vfio_device *vdev) { struct pds_vfio_pci_device *pds_vfio = @@ -179,7 +191,6 @@ static int pds_vfio_open_device(struct vfio_device *vdev) if (err) return err; - mutex_init(&pds_vfio->state_mutex); pds_vfio->state = VFIO_DEVICE_STATE_RUNNING; pds_vfio->deferred_reset_state = VFIO_DEVICE_STATE_RUNNING; @@ -199,14 +210,13 @@ static void pds_vfio_close_device(struct vfio_device *vdev) pds_vfio_put_save_file(pds_vfio); pds_vfio_dirty_disable(pds_vfio, true); mutex_unlock(&pds_vfio->state_mutex); - mutex_destroy(&pds_vfio->state_mutex); vfio_pci_core_close_device(vdev); } static const struct vfio_device_ops pds_vfio_ops = { .name = "pds-vfio", .init = pds_vfio_init_device, - .release = vfio_pci_core_release_dev, + .release = pds_vfio_release_device, .open_device = pds_vfio_open_device, .close_device = pds_vfio_close_device, .ioctl = vfio_pci_core_ioctl, -- cgit v1.2.3 From ae2667cd8a479bb5abd6e24c12fcc9ef5bc06d75 Mon Sep 17 00:00:00 2001 From: Brett Creeley Date: Wed, 22 Nov 2023 11:25:32 -0800 Subject: vfio/pds: Fix possible sleep while in atomic context The driver could possibly sleep while in atomic context resulting in the following call trace while CONFIG_DEBUG_ATOMIC_SLEEP=y is set: BUG: sleeping function called from invalid context at kernel/locking/mutex.c:283 in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 2817, name: bash preempt_count: 1, expected: 0 RCU nest depth: 0, expected: 0 Call Trace: dump_stack_lvl+0x36/0x50 __might_resched+0x123/0x170 mutex_lock+0x1e/0x50 pds_vfio_put_lm_file+0x1e/0xa0 [pds_vfio_pci] pds_vfio_put_save_file+0x19/0x30 [pds_vfio_pci] pds_vfio_state_mutex_unlock+0x2e/0x80 [pds_vfio_pci] pci_reset_function+0x4b/0x70 reset_store+0x5b/0xa0 kernfs_fop_write_iter+0x137/0x1d0 vfs_write+0x2de/0x410 ksys_write+0x5d/0xd0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x6e/0xd8 This can happen if pds_vfio_put_restore_file() and/or pds_vfio_put_save_file() grab the mutex_lock(&lm_file->lock) while the spin_lock(&pds_vfio->reset_lock) is held, which can happen during while calling pds_vfio_state_mutex_unlock(). Fix this by changing the reset_lock to reset_mutex so there are no such conerns. Also, make sure to destroy the reset_mutex in the driver specific VFIO device release function. This also fixes a spinlock bad magic BUG that was caused by not calling spinlock_init() on the reset_lock. Since, the lock is being changed to a mutex, make sure to call mutex_init() on it. Reported-by: Dan Carpenter Closes: https://lore.kernel.org/kvm/1f9bc27b-3de9-4891-9687-ba2820c1b390@moroto.mountain/ Fixes: bb500dbe2ac6 ("vfio/pds: Add VFIO live migration support") Signed-off-by: Brett Creeley Reviewed-by: Shannon Nelson Link: https://lore.kernel.org/r/20231122192532.25791-3-brett.creeley@amd.com Signed-off-by: Alex Williamson --- drivers/vfio/pci/pds/pci_drv.c | 4 ++-- drivers/vfio/pci/pds/vfio_dev.c | 14 ++++++++------ drivers/vfio/pci/pds/vfio_dev.h | 2 +- 3 files changed, 11 insertions(+), 9 deletions(-) diff --git a/drivers/vfio/pci/pds/pci_drv.c b/drivers/vfio/pci/pds/pci_drv.c index dd8c00c895a2..a34dda516629 100644 --- a/drivers/vfio/pci/pds/pci_drv.c +++ b/drivers/vfio/pci/pds/pci_drv.c @@ -55,10 +55,10 @@ static void pds_vfio_recovery(struct pds_vfio_pci_device *pds_vfio) * VFIO_DEVICE_STATE_RUNNING. */ if (deferred_reset_needed) { - spin_lock(&pds_vfio->reset_lock); + mutex_lock(&pds_vfio->reset_mutex); pds_vfio->deferred_reset = true; pds_vfio->deferred_reset_state = VFIO_DEVICE_STATE_ERROR; - spin_unlock(&pds_vfio->reset_lock); + mutex_unlock(&pds_vfio->reset_mutex); } } diff --git a/drivers/vfio/pci/pds/vfio_dev.c b/drivers/vfio/pci/pds/vfio_dev.c index 8c9fb87b13e1..4c351c59d05a 100644 --- a/drivers/vfio/pci/pds/vfio_dev.c +++ b/drivers/vfio/pci/pds/vfio_dev.c @@ -29,7 +29,7 @@ struct pds_vfio_pci_device *pds_vfio_pci_drvdata(struct pci_dev *pdev) void pds_vfio_state_mutex_unlock(struct pds_vfio_pci_device *pds_vfio) { again: - spin_lock(&pds_vfio->reset_lock); + mutex_lock(&pds_vfio->reset_mutex); if (pds_vfio->deferred_reset) { pds_vfio->deferred_reset = false; if (pds_vfio->state == VFIO_DEVICE_STATE_ERROR) { @@ -39,23 +39,23 @@ again: } pds_vfio->state = pds_vfio->deferred_reset_state; pds_vfio->deferred_reset_state = VFIO_DEVICE_STATE_RUNNING; - spin_unlock(&pds_vfio->reset_lock); + mutex_unlock(&pds_vfio->reset_mutex); goto again; } mutex_unlock(&pds_vfio->state_mutex); - spin_unlock(&pds_vfio->reset_lock); + mutex_unlock(&pds_vfio->reset_mutex); } void pds_vfio_reset(struct pds_vfio_pci_device *pds_vfio) { - spin_lock(&pds_vfio->reset_lock); + mutex_lock(&pds_vfio->reset_mutex); pds_vfio->deferred_reset = true; pds_vfio->deferred_reset_state = VFIO_DEVICE_STATE_RUNNING; if (!mutex_trylock(&pds_vfio->state_mutex)) { - spin_unlock(&pds_vfio->reset_lock); + mutex_unlock(&pds_vfio->reset_mutex); return; } - spin_unlock(&pds_vfio->reset_lock); + mutex_unlock(&pds_vfio->reset_mutex); pds_vfio_state_mutex_unlock(pds_vfio); } @@ -156,6 +156,7 @@ static int pds_vfio_init_device(struct vfio_device *vdev) pds_vfio->vf_id = vf_id; mutex_init(&pds_vfio->state_mutex); + mutex_init(&pds_vfio->reset_mutex); vdev->migration_flags = VFIO_MIGRATION_STOP_COPY | VFIO_MIGRATION_P2P; vdev->mig_ops = &pds_vfio_lm_ops; @@ -177,6 +178,7 @@ static void pds_vfio_release_device(struct vfio_device *vdev) vfio_coredev.vdev); mutex_destroy(&pds_vfio->state_mutex); + mutex_destroy(&pds_vfio->reset_mutex); vfio_pci_core_release_dev(vdev); } diff --git a/drivers/vfio/pci/pds/vfio_dev.h b/drivers/vfio/pci/pds/vfio_dev.h index b8f2d667608f..e7b01080a1ec 100644 --- a/drivers/vfio/pci/pds/vfio_dev.h +++ b/drivers/vfio/pci/pds/vfio_dev.h @@ -18,7 +18,7 @@ struct pds_vfio_pci_device { struct pds_vfio_dirty dirty; struct mutex state_mutex; /* protect migration state */ enum vfio_device_mig_state state; - spinlock_t reset_lock; /* protect reset_done flow */ + struct mutex reset_mutex; /* protect reset_done flow */ u8 deferred_reset; enum vfio_device_mig_state deferred_reset_state; struct notifier_block nb; -- cgit v1.2.3 From 076a948f5ad0da8a4438fdb3ec1b4a473084b40a Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Fri, 24 Nov 2023 10:50:30 +0100 Subject: ARM: dts: rockchip: minor whitespace cleanup around '=' The DTS code coding style expects exactly one space before and after '=' sign. Signed-off-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20231124095031.58555-1-krzysztof.kozlowski@linaro.org Signed-off-by: Heiko Stuebner --- arch/arm/boot/dts/rockchip/rk322x.dtsi | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/arm/boot/dts/rockchip/rk322x.dtsi b/arch/arm/boot/dts/rockchip/rk322x.dtsi index ffc16d6b97e1..a721744cbfd1 100644 --- a/arch/arm/boot/dts/rockchip/rk322x.dtsi +++ b/arch/arm/boot/dts/rockchip/rk322x.dtsi @@ -215,9 +215,9 @@ power-domain@RK3228_PD_VOP { reg = ; - clocks =<&cru ACLK_VOP>, - <&cru DCLK_VOP>, - <&cru HCLK_VOP>; + clocks = <&cru ACLK_VOP>, + <&cru DCLK_VOP>, + <&cru HCLK_VOP>; pm_qos = <&qos_vop>; #power-domain-cells = <0>; }; -- cgit v1.2.3 From 93dc6cd15f207be502739072ad122fa5ac812908 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Fri, 24 Nov 2023 10:50:31 +0100 Subject: arm64: dts: rockchip: minor whitespace cleanup around '=' The DTS code coding style expects exactly one space before and after '=' sign. Signed-off-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20231124095031.58555-2-krzysztof.kozlowski@linaro.org Signed-off-by: Heiko Stuebner --- arch/arm64/boot/dts/rockchip/px30-ringneck-haikou.dts | 2 +- arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dts | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm64/boot/dts/rockchip/px30-ringneck-haikou.dts b/arch/arm64/boot/dts/rockchip/px30-ringneck-haikou.dts index de0a1f2af983..7d4c5324c61b 100644 --- a/arch/arm64/boot/dts/rockchip/px30-ringneck-haikou.dts +++ b/arch/arm64/boot/dts/rockchip/px30-ringneck-haikou.dts @@ -86,7 +86,7 @@ sgtl5000_clk: sgtl5000-oscillator { compatible = "fixed-clock"; #clock-cells = <0>; - clock-frequency = <24576000>; + clock-frequency = <24576000>; }; dc_12v: dc-12v-regulator { diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dts b/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dts index 8f399c4317bd..e3a839a12dc6 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dts @@ -38,7 +38,7 @@ leds { compatible = "gpio-leds"; pinctrl-names = "default"; - pinctrl-0 =<&leds_gpio>; + pinctrl-0 = <&leds_gpio>; led-1 { gpios = <&gpio1 RK_PA2 GPIO_ACTIVE_HIGH>; -- cgit v1.2.3 From ded965834b156c93dd914b0c6952e8f77929cf84 Mon Sep 17 00:00:00 2001 From: Michael Walle Date: Thu, 23 Nov 2023 14:49:27 +0100 Subject: dt-bindings: display: mediatek: dsi: remove Xinlei's mail Xinlei Lee's mail is bouncing: : host mailgw02.mediatek.com[216.200.240.185] said: 550 Relaying mail to xinlei.lee@mediatek.com is not allowed (in reply to RCPT TO command) Remove it. Signed-off-by: Michael Walle Acked-by: Conor Dooley Link: https://lore.kernel.org/r/20231123134927.2034024-1-mwalle@kernel.org Signed-off-by: Rob Herring --- Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.yaml | 1 - 1 file changed, 1 deletion(-) diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.yaml index 12441b937684..43bfea32e5b6 100644 --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.yaml +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.yaml @@ -10,7 +10,6 @@ maintainers: - Chun-Kuang Hu - Philipp Zabel - Jitao Shi - - Xinlei Lee description: | The MediaTek DSI function block is a sink of the display subsystem and can -- cgit v1.2.3 From 76cab6f4fd63129e852eb15e14d6d359b57e797f Mon Sep 17 00:00:00 2001 From: Yi Zhang Date: Mon, 27 Nov 2023 12:00:26 +0800 Subject: ndtest: fix typo class_regster -> class_register Fixes: dd6cad2dcb58 ("testing: nvdimm: make struct class structures constant") Signed-off-by: Yi Zhang Reviewed-by: Dave Jiang Link: https://lore.kernel.org/r/20231127040026.362729-1-yi.zhang@redhat.com Signed-off-by: Greg Kroah-Hartman --- tools/testing/nvdimm/test/ndtest.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/nvdimm/test/ndtest.c b/tools/testing/nvdimm/test/ndtest.c index fd26189d53be..b8419f460368 100644 --- a/tools/testing/nvdimm/test/ndtest.c +++ b/tools/testing/nvdimm/test/ndtest.c @@ -924,7 +924,7 @@ static __init int ndtest_init(void) nfit_test_setup(ndtest_resource_lookup, NULL); - rc = class_regster(&ndtest_dimm_class); + rc = class_register(&ndtest_dimm_class); if (rc) goto err_register; -- cgit v1.2.3 From 136cfcb8dce9bc7a17a8d32e497f4dfe80dd357d Mon Sep 17 00:00:00 2001 From: Mark O'Donovan Date: Fri, 24 Nov 2023 20:56:59 +0000 Subject: nvme: fine-tune sending of first keep-alive Keep-alive commands are sent half-way through the kato period. This normally works well but fails when the keep-alive system is started when we are more than half way through the kato. This can happen on larger setups or due to host delays. With this change we now time the initial keep-alive command from the controller initialisation time, rather than the keep-alive mechanism activation time. Signed-off-by: Mark O'Donovan Reviewed-by: Sagi Grimberg Signed-off-by: Keith Busch --- drivers/nvme/host/core.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-) diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c index 46a4c9c5ea96..8bf24c1cd8bb 100644 --- a/drivers/nvme/host/core.c +++ b/drivers/nvme/host/core.c @@ -1192,8 +1192,16 @@ static unsigned long nvme_keep_alive_work_period(struct nvme_ctrl *ctrl) static void nvme_queue_keep_alive_work(struct nvme_ctrl *ctrl) { - queue_delayed_work(nvme_wq, &ctrl->ka_work, - nvme_keep_alive_work_period(ctrl)); + unsigned long now = jiffies; + unsigned long delay = nvme_keep_alive_work_period(ctrl); + unsigned long ka_next_check_tm = ctrl->ka_last_check_time + delay; + + if (time_after(now, ka_next_check_tm)) + delay = 0; + else + delay = ka_next_check_tm - now; + + queue_delayed_work(nvme_wq, &ctrl->ka_work, delay); } static enum rq_end_io_ret nvme_keep_alive_end_io(struct request *rq, @@ -4471,6 +4479,7 @@ int nvme_init_ctrl(struct nvme_ctrl *ctrl, struct device *dev, INIT_DELAYED_WORK(&ctrl->failfast_work, nvme_failfast_work); memset(&ctrl->ka_cmd, 0, sizeof(ctrl->ka_cmd)); ctrl->ka_cmd.common.opcode = nvme_admin_keep_alive; + ctrl->ka_last_check_time = jiffies; BUILD_BUG_ON(NVME_DSM_MAX_RANGES * sizeof(struct nvme_dsm_range) > PAGE_SIZE); -- cgit v1.2.3 From e3139cef8257fcab1725441e2fd5fd0ccb5481b1 Mon Sep 17 00:00:00 2001 From: Maurizio Lombardi Date: Thu, 23 Nov 2023 15:07:41 +0100 Subject: nvme-core: fix a memory leak in nvme_ns_info_from_identify() In case of error, free the nvme_id_ns structure that was allocated by nvme_identify_ns(). Signed-off-by: Maurizio Lombardi Reviewed-by: Sagi Grimberg Reviewed-by: Kanchan Joshi Signed-off-by: Keith Busch --- drivers/nvme/host/core.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c index 8bf24c1cd8bb..af94d067ac14 100644 --- a/drivers/nvme/host/core.c +++ b/drivers/nvme/host/core.c @@ -1487,7 +1487,8 @@ static int nvme_ns_info_from_identify(struct nvme_ctrl *ctrl, if (id->ncap == 0) { /* namespace not allocated or attached */ info->is_removed = true; - return -ENODEV; + ret = -ENODEV; + goto error; } info->anagrpid = id->anagrpid; @@ -1505,8 +1506,10 @@ static int nvme_ns_info_from_identify(struct nvme_ctrl *ctrl, !memchr_inv(ids->nguid, 0, sizeof(ids->nguid))) memcpy(ids->nguid, id->nguid, sizeof(ids->nguid)); } + +error: kfree(id); - return 0; + return ret; } static int nvme_ns_info_from_id_cs_indep(struct nvme_ctrl *ctrl, -- cgit v1.2.3 From 95ba893c9f4feb836ddce627efd0bb6af6667031 Mon Sep 17 00:00:00 2001 From: Christian König Date: Tue, 14 Nov 2023 13:37:09 +0100 Subject: dma-buf: fix check in dma_resv_add_fence MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit It's valid to add the same fence multiple times to a dma-resv object and we shouldn't need one extra slot for each. Signed-off-by: Christian König Reviewed-by: Thomas Hellström Fixes: a3f7c10a269d5 ("dma-buf/dma-resv: check if the new fence is really later") Cc: stable@vger.kernel.org # v5.19+ Link: https://patchwork.freedesktop.org/patch/msgid/20231115093035.1889-1-christian.koenig@amd.com --- drivers/dma-buf/dma-resv.c | 2 +- include/linux/dma-fence.h | 15 +++++++++++++++ 2 files changed, 16 insertions(+), 1 deletion(-) diff --git a/drivers/dma-buf/dma-resv.c b/drivers/dma-buf/dma-resv.c index 38b4110378de..eb8b733065b2 100644 --- a/drivers/dma-buf/dma-resv.c +++ b/drivers/dma-buf/dma-resv.c @@ -301,7 +301,7 @@ void dma_resv_add_fence(struct dma_resv *obj, struct dma_fence *fence, dma_resv_list_entry(fobj, i, obj, &old, &old_usage); if ((old->context == fence->context && old_usage >= usage && - dma_fence_is_later(fence, old)) || + dma_fence_is_later_or_same(fence, old)) || dma_fence_is_signaled(old)) { dma_resv_list_set(fobj, i, fence, usage); dma_fence_put(old); diff --git a/include/linux/dma-fence.h b/include/linux/dma-fence.h index ebe78bd3d121..b3772edca2e6 100644 --- a/include/linux/dma-fence.h +++ b/include/linux/dma-fence.h @@ -498,6 +498,21 @@ static inline bool dma_fence_is_later(struct dma_fence *f1, return __dma_fence_is_later(f1->seqno, f2->seqno, f1->ops); } +/** + * dma_fence_is_later_or_same - return true if f1 is later or same as f2 + * @f1: the first fence from the same context + * @f2: the second fence from the same context + * + * Returns true if f1 is chronologically later than f2 or the same fence. Both + * fences must be from the same context, since a seqno is not re-used across + * contexts. + */ +static inline bool dma_fence_is_later_or_same(struct dma_fence *f1, + struct dma_fence *f2) +{ + return f1 == f2 || dma_fence_is_later(f1, f2); +} + /** * dma_fence_later - return the chronologically later fence * @f1: the first fence from the same context -- cgit v1.2.3 From 172c48caed91a978bca078042222d09baea13717 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Mon, 27 Nov 2023 15:37:41 +0100 Subject: ACPI: video: Use acpi_video_device for cooling-dev driver data The acpi_video code was storing the acpi_video_device as driver_data in the acpi_device children of the acpi_video_bus acpi_device. But the acpi_video driver only binds to the bus acpi_device. It uses, but does not bind to, the children. Since it is not the driver it should not be using the driver_data of the children's acpi_device-s. Since commit 0d16710146a1 ("ACPI: bus: Set driver_data to NULL every time .add() fails") the childen's driver_data ends up getting set to NULL after a driver fails to bind to the children leading to a NULL pointer deref in video_get_max_state when registering the cooling-dev: [ 3.148958] BUG: kernel NULL pointer dereference, address: 0000000000000090 [ 3.149015] Hardware name: Sony Corporation VPCSB2X9R/VAIO, BIOS R2087H4 06/15/2012 [ 3.149021] RIP: 0010:video_get_max_state+0x17/0x30 [video] [ 3.149105] Call Trace: [ 3.149110] [ 3.149114] ? __die+0x23/0x70 [ 3.149126] ? page_fault_oops+0x171/0x4e0 [ 3.149137] ? exc_page_fault+0x7f/0x180 [ 3.149147] ? asm_exc_page_fault+0x26/0x30 [ 3.149158] ? video_get_max_state+0x17/0x30 [video 9b6f3f0d19d7b4a0e2df17a2d8b43bc19c2ed71f] [ 3.149176] ? __pfx_video_get_max_state+0x10/0x10 [video 9b6f3f0d19d7b4a0e2df17a2d8b43bc19c2ed71f] [ 3.149192] __thermal_cooling_device_register.part.0+0xf2/0x2f0 [ 3.149205] acpi_video_bus_register_backlight.part.0.isra.0+0x414/0x570 [video 9b6f3f0d19d7b4a0e2df17a2d8b43bc19c2ed71f] [ 3.149227] acpi_video_register_backlight+0x57/0x80 [video 9b6f3f0d19d7b4a0e2df17a2d8b43bc19c2ed71f] [ 3.149245] intel_acpi_video_register+0x68/0x90 [i915 1f3a758130b32ef13d301d4f8f78c7d766d57f2a] [ 3.149669] intel_display_driver_register+0x28/0x50 [i915 1f3a758130b32ef13d301d4f8f78c7d766d57f2a] [ 3.150064] i915_driver_probe+0x790/0xb90 [i915 1f3a758130b32ef13d301d4f8f78c7d766d57f2a] [ 3.150402] local_pci_probe+0x45/0xa0 [ 3.150412] pci_device_probe+0xc1/0x260 Fix this by directly using the acpi_video_device as devdata for the cooling-device, which avoids the need to set driver-data on the children at all. Fixes: 0d16710146a1 ("ACPI: bus: Set driver_data to NULL every time .add() fails") Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/9718 Cc: 6.6+ # 6.6+ Signed-off-by: Hans de Goede Signed-off-by: Rafael J. Wysocki --- drivers/acpi/acpi_video.c | 14 +++++--------- 1 file changed, 5 insertions(+), 9 deletions(-) diff --git a/drivers/acpi/acpi_video.c b/drivers/acpi/acpi_video.c index d321ca7160d9..6cee536c229a 100644 --- a/drivers/acpi/acpi_video.c +++ b/drivers/acpi/acpi_video.c @@ -253,8 +253,7 @@ static const struct backlight_ops acpi_backlight_ops = { static int video_get_max_state(struct thermal_cooling_device *cooling_dev, unsigned long *state) { - struct acpi_device *device = cooling_dev->devdata; - struct acpi_video_device *video = acpi_driver_data(device); + struct acpi_video_device *video = cooling_dev->devdata; *state = video->brightness->count - ACPI_VIDEO_FIRST_LEVEL - 1; return 0; @@ -263,8 +262,7 @@ static int video_get_max_state(struct thermal_cooling_device *cooling_dev, static int video_get_cur_state(struct thermal_cooling_device *cooling_dev, unsigned long *state) { - struct acpi_device *device = cooling_dev->devdata; - struct acpi_video_device *video = acpi_driver_data(device); + struct acpi_video_device *video = cooling_dev->devdata; unsigned long long level; int offset; @@ -283,8 +281,7 @@ static int video_get_cur_state(struct thermal_cooling_device *cooling_dev, static int video_set_cur_state(struct thermal_cooling_device *cooling_dev, unsigned long state) { - struct acpi_device *device = cooling_dev->devdata; - struct acpi_video_device *video = acpi_driver_data(device); + struct acpi_video_device *video = cooling_dev->devdata; int level; if (state >= video->brightness->count - ACPI_VIDEO_FIRST_LEVEL) @@ -1125,7 +1122,6 @@ static int acpi_video_bus_get_one_device(struct acpi_device *device, void *arg) strcpy(acpi_device_name(device), ACPI_VIDEO_DEVICE_NAME); strcpy(acpi_device_class(device), ACPI_VIDEO_CLASS); - device->driver_data = data; data->device_id = device_id; data->video = video; @@ -1747,8 +1743,8 @@ static void acpi_video_dev_register_backlight(struct acpi_video_device *device) device->backlight->props.brightness = acpi_video_get_brightness(device->backlight); - device->cooling_dev = thermal_cooling_device_register("LCD", - device->dev, &video_cooling_ops); + device->cooling_dev = thermal_cooling_device_register("LCD", device, + &video_cooling_ops); if (IS_ERR(device->cooling_dev)) { /* * Set cooling_dev to NULL so we don't crash trying to free it. -- cgit v1.2.3 From d79972789d17499b6091ded2fc0c6763c501a5ba Mon Sep 17 00:00:00 2001 From: Luca Ceresoli Date: Thu, 23 Nov 2023 15:47:18 +0100 Subject: of: dynamic: Fix of_reconfig_get_state_change() return value documentation The documented numeric return values do not match the actual returned values. Fix them by using the enum names instead of raw numbers. Fixes: b53a2340d0d3 ("of/reconfig: Add of_reconfig_get_state_change() of notifier helper.") Signed-off-by: Luca Ceresoli Link: https://lore.kernel.org/r/20231123-fix-of_reconfig_get_state_change-docs-v1-1-f51892050ff9@bootlin.com Signed-off-by: Rob Herring --- drivers/of/dynamic.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/of/dynamic.c b/drivers/of/dynamic.c index 0a3483e247a8..a5afe14eef28 100644 --- a/drivers/of/dynamic.c +++ b/drivers/of/dynamic.c @@ -98,8 +98,9 @@ int of_reconfig_notify(unsigned long action, struct of_reconfig_data *p) * * Returns the new state of a device based on the notifier used. * - * Return: 0 on device going from enabled to disabled, 1 on device - * going from disabled to enabled and -1 on no change. + * Return: OF_RECONFIG_CHANGE_REMOVE on device going from enabled to + * disabled, OF_RECONFIG_CHANGE_ADD on device going from disabled to + * enabled and OF_RECONFIG_NO_CHANGE on no change. */ int of_reconfig_get_state_change(unsigned long action, struct of_reconfig_data *pr) { -- cgit v1.2.3 From d8b90d600aff181936457f032d116dbd8534db06 Mon Sep 17 00:00:00 2001 From: "Ewan D. Milne" Date: Mon, 27 Nov 2023 15:56:57 -0500 Subject: nvme: check for valid nvme_identify_ns() before using it When scanning namespaces, it is possible to get valid data from the first call to nvme_identify_ns() in nvme_alloc_ns(), but not from the second call in nvme_update_ns_info_block(). In particular, if the NSID becomes inactive between the two commands, a storage device may return a buffer filled with zero as per 4.1.5.1. In this case, we can get a kernel crash due to a divide-by-zero in blk_stack_limits() because ns->lba_shift will be set to zero. PID: 326 TASK: ffff95fec3cd8000 CPU: 29 COMMAND: "kworker/u98:10" #0 [ffffad8f8702f9e0] machine_kexec at ffffffff91c76ec7 #1 [ffffad8f8702fa38] __crash_kexec at ffffffff91dea4fa #2 [ffffad8f8702faf8] crash_kexec at ffffffff91deb788 #3 [ffffad8f8702fb00] oops_end at ffffffff91c2e4bb #4 [ffffad8f8702fb20] do_trap at ffffffff91c2a4ce #5 [ffffad8f8702fb70] do_error_trap at ffffffff91c2a595 #6 [ffffad8f8702fbb0] exc_divide_error at ffffffff928506e6 #7 [ffffad8f8702fbd0] asm_exc_divide_error at ffffffff92a00926 [exception RIP: blk_stack_limits+434] RIP: ffffffff92191872 RSP: ffffad8f8702fc80 RFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff95efa0c91800 RCX: 0000000000000001 RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000001 RBP: 00000000ffffffff R8: ffff95fec7df35a8 R9: 0000000000000000 R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: ffff95fed33c09a8 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #8 [ffffad8f8702fce0] nvme_update_ns_info_block at ffffffffc06d3533 [nvme_core] #9 [ffffad8f8702fd18] nvme_scan_ns at ffffffffc06d6fa7 [nvme_core] This happened when the check for valid data was moved out of nvme_identify_ns() into one of the callers. Fix this by checking in both callers. Link: https://bugzilla.kernel.org/show_bug.cgi?id=218186 Fixes: 0dd6fff2aad4 ("nvme: bring back auto-removal of deleted namespaces during sequential scan") Cc: stable@vger.kernel.org Signed-off-by: Ewan D. Milne Signed-off-by: Keith Busch --- drivers/nvme/host/core.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c index af94d067ac14..a55c2a774b9c 100644 --- a/drivers/nvme/host/core.c +++ b/drivers/nvme/host/core.c @@ -2040,6 +2040,13 @@ static int nvme_update_ns_info_block(struct nvme_ns *ns, if (ret) return ret; + if (id->ncap == 0) { + /* namespace not allocated or attached */ + info->is_removed = true; + ret = -ENODEV; + goto error; + } + blk_mq_freeze_queue(ns->disk->queue); lbaf = nvme_lbaf_index(id->flbas); ns->lba_shift = id->lbaf[lbaf].ds; @@ -2101,6 +2108,8 @@ out: set_bit(NVME_NS_READY, &ns->flags); ret = 0; } + +error: kfree(id); return ret; } -- cgit v1.2.3 From e8d66d02defd3256a31c0ec09af63382b8682c0e Mon Sep 17 00:00:00 2001 From: Jagadeesh Kona Date: Tue, 7 Nov 2023 12:15:45 +0530 Subject: clk: qcom: Fix SM_CAMCC_8550 dependencies SM_GCC_8550 depends on ARM64 but it is selected by SM_CAMCC_8550, which should have the same dependencies as SM_GCC_8550 to avoid the below Kconfig warning reported by kernel test robot. WARNING: unmet direct dependencies detected for SM_GCC_8550 Depends on [n]: COMMON_CLK [=y] && COMMON_CLK_QCOM [=y] && (ARM64 || COMPILE_TEST [=n]) Selected by [y]: - SM_CAMCC_8550 [=y] && COMMON_CLK [=y] && COMMON_CLK_QCOM [=y] Fixes: ccc4e6a061a2 ("clk: qcom: camcc-sm8550: Add camera clock controller driver for SM8550") Reported-by: kernel test robot Closes: https://lore.kernel.org/oe-kbuild-all/202311062309.XugQH7AH-lkp@intel.com/ Signed-off-by: Jagadeesh Kona Link: https://lore.kernel.org/r/20231107064545.13120-1-quic_jkona@quicinc.com Reviewed-by: Dmitry Baryshkov Tested-by: Randy Dunlap Reviewed-by: Randy Dunlap Signed-off-by: Stephen Boyd --- drivers/clk/qcom/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig index ad1acd9b7426..dbc3950c5960 100644 --- a/drivers/clk/qcom/Kconfig +++ b/drivers/clk/qcom/Kconfig @@ -767,6 +767,7 @@ config SM_CAMCC_8450 config SM_CAMCC_8550 tristate "SM8550 Camera Clock Controller" + depends on ARM64 || COMPILE_TEST select SM_GCC_8550 help Support for the camera clock controller on SM8550 devices. -- cgit v1.2.3 From 0bad281d0ecdf8391b0f42678b663336e7c3ceb0 Mon Sep 17 00:00:00 2001 From: Daniel Borkmann Date: Mon, 27 Nov 2023 21:05:33 +0100 Subject: netkit: Reject IFLA_NETKIT_PEER_INFO in netkit_change_link The IFLA_NETKIT_PEER_INFO attribute can only be used during device creation, but not via changelink callback. Hence reject it there. Fixes: 35dfaad7188c ("netkit, bpf: Add bpf programmable net device") Signed-off-by: Daniel Borkmann Acked-by: Nikolay Aleksandrov Cc: Jakub Kicinski Reviewed-by: Jakub Kicinski Link: https://lore.kernel.org/r/e86a277a1e8d3b19890312779e42f790b0605ea4.1701115314.git.daniel@iogearbox.net Signed-off-by: Martin KaFai Lau --- drivers/net/netkit.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/net/netkit.c b/drivers/net/netkit.c index 97bd6705c241..39171380ccf2 100644 --- a/drivers/net/netkit.c +++ b/drivers/net/netkit.c @@ -851,6 +851,12 @@ static int netkit_change_link(struct net_device *dev, struct nlattr *tb[], return -EACCES; } + if (data[IFLA_NETKIT_PEER_INFO]) { + NL_SET_ERR_MSG_ATTR(extack, data[IFLA_NETKIT_PEER_INFO], + "netkit peer info cannot be changed after device creation"); + return -EINVAL; + } + if (data[IFLA_NETKIT_POLICY]) { attr = data[IFLA_NETKIT_POLICY]; policy = nla_get_u32(attr); -- cgit v1.2.3 From 6f007b1406637d3d73d42e41d7e8d9b245185e69 Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Mon, 27 Nov 2023 17:08:19 -0700 Subject: io_uring: don't guard IORING_OFF_PBUF_RING with SETUP_NO_MMAP This flag only applies to the SQ and CQ rings, it's perfectly valid to use a mmap approach for the provided ring buffers. Move the check into where it belongs. Cc: stable@vger.kernel.org Fixes: 03d89a2de25b ("io_uring: support for user allocated memory for rings/sqes") Signed-off-by: Jens Axboe --- io_uring/io_uring.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/io_uring/io_uring.c b/io_uring/io_uring.c index b45abfd75415..52e4b14ad8aa 100644 --- a/io_uring/io_uring.c +++ b/io_uring/io_uring.c @@ -3478,16 +3478,18 @@ static void *io_uring_validate_mmap_request(struct file *file, struct page *page; void *ptr; - /* Don't allow mmap if the ring was setup without it */ - if (ctx->flags & IORING_SETUP_NO_MMAP) - return ERR_PTR(-EINVAL); - switch (offset & IORING_OFF_MMAP_MASK) { case IORING_OFF_SQ_RING: case IORING_OFF_CQ_RING: + /* Don't allow mmap if the ring was setup without it */ + if (ctx->flags & IORING_SETUP_NO_MMAP) + return ERR_PTR(-EINVAL); ptr = ctx->rings; break; case IORING_OFF_SQES: + /* Don't allow mmap if the ring was setup without it */ + if (ctx->flags & IORING_SETUP_NO_MMAP) + return ERR_PTR(-EINVAL); ptr = ctx->sq_sqes; break; case IORING_OFF_PBUF_RING: { -- cgit v1.2.3 From 9099184dec26669bea16ab86e586ad0f90aa7197 Mon Sep 17 00:00:00 2001 From: "ndesaulniers@google.com" Date: Fri, 17 Nov 2023 11:24:02 -0800 Subject: MAINTAINERS: refresh LLVM support As discussed at the ClangBuiltLinux '23 meetup (co-located with Linux Plumbers Conf '23), I'll be taking a step back from kernel work to focus on my growing family and helping Google figure out its libc story. So I think it's time to formally hand over the reigns to my co-maintainer Nathan. As such, remove myself from reviewer for: - CLANG CONTROL FLOW INTEGRITY SUPPORT - COMPILER ATTRIBUTES - KERNEL BUILD For CLANG/LLVM BUILD SUPPORT I'm bumping myself down from maintainer to reviewer, adding Bill and Justin, and removing Tom (Tom and I confirmed this via private email; thanks for the work done Tom, ++beers_owed). It has been my pleasure to work with everyone to improve the toolchain portability of the Linux kernel, and to help bring LLVM to the table as a competitor. The work here is not done. I have a few last LLVM patches in the works to improve stack usage of clang which has been our longest standing open issue (getting "rm" inline asm constraints to DTRT is part of that). But looking back I'm incredibly proud of where we are to today relative to where we were when we started the ClangBuiltLinux journey, and am confident that the team and processes we have put in place will continue to be successful. I continue to believe that a rising tide will lift all boats. I identify first and foremost as a Linux kernel developer, and an LLVM dev second. May it be a cold day in hell when that changes. Wake me when you need me. Signed-off-by: Nick Desaulniers Acked-by: Miguel Ojeda Acked-by: Bill Wendling Acked-by: Masahiro Yamada Acked-by: Nathan Chancellor Reviewed-by: Kees Cook Link: https://lore.kernel.org/r/20231117-maintainers-v1-1-85f2a7422ed9@google.com Signed-off-by: Kees Cook --- MAINTAINERS | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index ea790149af79..f4670e041285 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -5076,7 +5076,6 @@ CLANG CONTROL FLOW INTEGRITY SUPPORT M: Sami Tolvanen M: Kees Cook R: Nathan Chancellor -R: Nick Desaulniers L: llvm@lists.linux.dev S: Supported B: https://github.com/ClangBuiltLinux/linux/issues @@ -5091,8 +5090,9 @@ F: .clang-format CLANG/LLVM BUILD SUPPORT M: Nathan Chancellor -M: Nick Desaulniers -R: Tom Rix +R: Nick Desaulniers +R: Bill Wendling +R: Justin Stitt L: llvm@lists.linux.dev S: Supported W: https://clangbuiltlinux.github.io/ @@ -5242,7 +5242,6 @@ F: drivers/platform/x86/compal-laptop.c COMPILER ATTRIBUTES M: Miguel Ojeda -R: Nick Desaulniers S: Maintained F: include/linux/compiler_attributes.h @@ -11516,7 +11515,6 @@ F: fs/autofs/ KERNEL BUILD + files below scripts/ (unless maintained elsewhere) M: Masahiro Yamada R: Nathan Chancellor -R: Nick Desaulniers R: Nicolas Schier L: linux-kbuild@vger.kernel.org S: Maintained -- cgit v1.2.3 From 4e86f32a13af1970d21be94f659cae56bbe487ee Mon Sep 17 00:00:00 2001 From: Dmitry Antipov Date: Mon, 20 Nov 2023 14:05:08 +0300 Subject: uapi: propagate __struct_group() attributes to the container union Recently the kernel test robot has reported an ARM-specific BUILD_BUG_ON() in an old and unmaintained wil6210 wireless driver. The problem comes from the structure packing rules of old ARM ABI ('-mabi=apcs-gnu'). For example, the following structure is packed to 18 bytes instead of 16: struct poorly_packed { unsigned int a; unsigned int b; unsigned short c; union { struct { unsigned short d; unsigned int e; } __attribute__((packed)); struct { unsigned short d; unsigned int e; } __attribute__((packed)) inner; }; } __attribute__((packed)); To fit it into 16 bytes, it's required to add packed attribute to the container union as well: struct poorly_packed { unsigned int a; unsigned int b; unsigned short c; union { struct { unsigned short d; unsigned int e; } __attribute__((packed)); struct { unsigned short d; unsigned int e; } __attribute__((packed)) inner; } __attribute__((packed)); } __attribute__((packed)); Thanks to Andrew Pinski of GCC team for sorting the things out at https://gcc.gnu.org/pipermail/gcc/2023-November/242888.html. Reported-by: kernel test robot Closes: https://lore.kernel.org/oe-kbuild-all/202311150821.cI4yciFE-lkp@intel.com Signed-off-by: Dmitry Antipov Link: https://lore.kernel.org/r/20231120110607.98956-1-dmantipov@yandex.ru Fixes: 50d7bd38c3aa ("stddef: Introduce struct_group() helper macro") Signed-off-by: Kees Cook --- include/uapi/linux/stddef.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/uapi/linux/stddef.h b/include/uapi/linux/stddef.h index 5c6c4269f7ef..2ec6f35cda32 100644 --- a/include/uapi/linux/stddef.h +++ b/include/uapi/linux/stddef.h @@ -27,7 +27,7 @@ union { \ struct { MEMBERS } ATTRS; \ struct TAG { MEMBERS } ATTRS NAME; \ - } + } ATTRS #ifdef __cplusplus /* sizeof(struct{}) is 1 in C++, not 0, can't use C version of the macro. */ -- cgit v1.2.3 From d71f22365a9caca82d424f3a33445de46567e198 Mon Sep 17 00:00:00 2001 From: "Gustavo A. R. Silva" Date: Sat, 25 Nov 2023 15:49:12 -0600 Subject: gcc-plugins: randstruct: Update code comment in relayout_struct() Update code comment to clarify that the only element whose layout is not randomized is a proper C99 flexible-array member. This update is complementary to commit 1ee60356c2dc ("gcc-plugins: randstruct: Only warn about true flexible arrays") Signed-off-by: "Gustavo A. R. Silva" Link: https://lore.kernel.org/r/ZWJr2MWDjXLHE8ap@work Fixes: 1ee60356c2dc ("gcc-plugins: randstruct: Only warn about true flexible arrays") Signed-off-by: Kees Cook --- scripts/gcc-plugins/randomize_layout_plugin.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/scripts/gcc-plugins/randomize_layout_plugin.c b/scripts/gcc-plugins/randomize_layout_plugin.c index 910bd21d08f4..746ff2d272f2 100644 --- a/scripts/gcc-plugins/randomize_layout_plugin.c +++ b/scripts/gcc-plugins/randomize_layout_plugin.c @@ -339,8 +339,7 @@ static int relayout_struct(tree type) /* * enforce that we don't randomize the layout of the last - * element of a struct if it's a 0 or 1-length array - * or a proper flexible array + * element of a struct if it's a proper flexible array */ if (is_flexible_array(newtree[num_fields - 1])) { has_flexarray = true; -- cgit v1.2.3 From 088559815477c6f623a5db5993491ddd7facbec7 Mon Sep 17 00:00:00 2001 From: Willem de Bruijn Date: Fri, 24 Nov 2023 12:15:19 -0500 Subject: selftests/net: ipsec: fix constant out of range Fix a small compiler warning. nr_process must be a signed long: it is assigned a signed long by strtol() and is compared against LONG_MIN and LONG_MAX. ipsec.c:2280:65: error: result of comparison of constant -9223372036854775808 with expression of type 'unsigned int' is always false [-Werror,-Wtautological-constant-out-of-range-compare] if ((errno == ERANGE && (nr_process == LONG_MAX || nr_process == LONG_MIN)) Fixes: bc2652b7ae1e ("selftest/net/xfrm: Add test for ipsec tunnel") Signed-off-by: Willem de Bruijn Reviewed-by: Dmitry Safonov <0x7f454c46@gmail.com> Link: https://lore.kernel.org/r/20231124171645.1011043-2-willemdebruijn.kernel@gmail.com Signed-off-by: Jakub Kicinski --- tools/testing/selftests/net/ipsec.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/tools/testing/selftests/net/ipsec.c b/tools/testing/selftests/net/ipsec.c index 9a8229abfa02..be4a30a0d02a 100644 --- a/tools/testing/selftests/net/ipsec.c +++ b/tools/testing/selftests/net/ipsec.c @@ -2263,7 +2263,7 @@ static int check_results(void) int main(int argc, char **argv) { - unsigned int nr_process = 1; + long nr_process = 1; int route_sock = -1, ret = KSFT_SKIP; int test_desc_fd[2]; uint32_t route_seq; @@ -2284,7 +2284,7 @@ int main(int argc, char **argv) exit_usage(argv); } - if (nr_process > MAX_PROCESSES || !nr_process) { + if (nr_process > MAX_PROCESSES || nr_process < 1) { printk("nr_process should be between [1; %u]", MAX_PROCESSES); exit_usage(argv); -- cgit v1.2.3 From 7b29828c5af6841bdeb9fafa32fdfeff7ab9c407 Mon Sep 17 00:00:00 2001 From: Willem de Bruijn Date: Fri, 24 Nov 2023 12:15:20 -0500 Subject: selftests/net: fix a char signedness issue Signedness of char is signed on x86_64, but unsigned on arm64. Fix the warning building cmsg_sender.c on signed platforms or forced with -fsigned-char: msg_sender.c:455:12: error: implicit conversion from 'int' to 'char' changes value from 128 to -128 [-Werror,-Wconstant-conversion] buf[0] = ICMPV6_ECHO_REQUEST; constant ICMPV6_ECHO_REQUEST is 128. Link: https://lwn.net/Articles/911914 Fixes: de17e305a810 ("selftests: net: cmsg_sender: support icmp and raw sockets") Signed-off-by: Willem de Bruijn Link: https://lore.kernel.org/r/20231124171645.1011043-3-willemdebruijn.kernel@gmail.com Signed-off-by: Jakub Kicinski --- tools/testing/selftests/net/cmsg_sender.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/net/cmsg_sender.c b/tools/testing/selftests/net/cmsg_sender.c index 24b21b15ed3f..6ff3e732f449 100644 --- a/tools/testing/selftests/net/cmsg_sender.c +++ b/tools/testing/selftests/net/cmsg_sender.c @@ -416,9 +416,9 @@ int main(int argc, char *argv[]) { struct addrinfo hints, *ai; struct iovec iov[1]; + unsigned char *buf; struct msghdr msg; char cbuf[1024]; - char *buf; int err; int fd; -- cgit v1.2.3 From 59fef379d453781f0dabfa1f1a1e86e78aee919a Mon Sep 17 00:00:00 2001 From: Willem de Bruijn Date: Fri, 24 Nov 2023 12:15:21 -0500 Subject: selftests/net: unix: fix unused variable compiler warning Remove an unused variable. diag_uid.c:151:24: error: unused variable 'udr' [-Werror,-Wunused-variable] Fixes: ac011361bd4f ("af_unix: Add test for sock_diag and UDIAG_SHOW_UID.") Signed-off-by: Willem de Bruijn Link: https://lore.kernel.org/r/20231124171645.1011043-4-willemdebruijn.kernel@gmail.com Signed-off-by: Jakub Kicinski --- tools/testing/selftests/net/af_unix/diag_uid.c | 1 - 1 file changed, 1 deletion(-) diff --git a/tools/testing/selftests/net/af_unix/diag_uid.c b/tools/testing/selftests/net/af_unix/diag_uid.c index 5b88f7129fea..79a3dd75590e 100644 --- a/tools/testing/selftests/net/af_unix/diag_uid.c +++ b/tools/testing/selftests/net/af_unix/diag_uid.c @@ -148,7 +148,6 @@ void receive_response(struct __test_metadata *_metadata, .msg_iov = &iov, .msg_iovlen = 1 }; - struct unix_diag_req *udr; struct nlmsghdr *nlh; int ret; -- cgit v1.2.3 From 00a4f8fd9c750f20d8fd4535c71c9caa7ef5ff2f Mon Sep 17 00:00:00 2001 From: Willem de Bruijn Date: Fri, 24 Nov 2023 12:15:22 -0500 Subject: selftests/net: mptcp: fix uninitialized variable warnings Same init_rng() in both tests. The function reads /dev/urandom to initialize srand(). In case of failure, it falls back onto the entropy in the uninitialized variable. Not sure if this is on purpose. But failure reading urandom should be rare, so just fail hard. While at it, convert to getrandom(). Which man 4 random suggests is simpler and more robust. mptcp_inq.c:525:6: mptcp_connect.c:1131:6: error: variable 'foo' is used uninitialized whenever 'if' condition is false [-Werror,-Wsometimes-uninitialized] Fixes: 048d19d444be ("mptcp: add basic kselftest for mptcp") Fixes: b51880568f20 ("selftests: mptcp: add inq test case") Cc: Florian Westphal Signed-off-by: Willem de Bruijn ---- When input is randomized because this is expected to meaningfully explore edge cases, should we also add 1. logging the random seed to stdout and 2. adding a command line argument to replay from a specific seed I can do this in net-next, if authors find it useful in this case. Reviewed-by: Matthieu Baerts Link: https://lore.kernel.org/r/20231124171645.1011043-5-willemdebruijn.kernel@gmail.com Signed-off-by: Jakub Kicinski --- tools/testing/selftests/net/mptcp/mptcp_connect.c | 11 ++++------- tools/testing/selftests/net/mptcp/mptcp_inq.c | 11 ++++------- 2 files changed, 8 insertions(+), 14 deletions(-) diff --git a/tools/testing/selftests/net/mptcp/mptcp_connect.c b/tools/testing/selftests/net/mptcp/mptcp_connect.c index c7f9ebeebc2c..d2043ec3bf6d 100644 --- a/tools/testing/selftests/net/mptcp/mptcp_connect.c +++ b/tools/testing/selftests/net/mptcp/mptcp_connect.c @@ -18,6 +18,7 @@ #include #include +#include #include #include #include @@ -1125,15 +1126,11 @@ again: static void init_rng(void) { - int fd = open("/dev/urandom", O_RDONLY); unsigned int foo; - if (fd > 0) { - int ret = read(fd, &foo, sizeof(foo)); - - if (ret < 0) - srand(fd + foo); - close(fd); + if (getrandom(&foo, sizeof(foo), 0) == -1) { + perror("getrandom"); + exit(1); } srand(foo); diff --git a/tools/testing/selftests/net/mptcp/mptcp_inq.c b/tools/testing/selftests/net/mptcp/mptcp_inq.c index 8672d898f8cd..218aac467321 100644 --- a/tools/testing/selftests/net/mptcp/mptcp_inq.c +++ b/tools/testing/selftests/net/mptcp/mptcp_inq.c @@ -18,6 +18,7 @@ #include #include +#include #include #include #include @@ -519,15 +520,11 @@ static int client(int unixfd) static void init_rng(void) { - int fd = open("/dev/urandom", O_RDONLY); unsigned int foo; - if (fd > 0) { - int ret = read(fd, &foo, sizeof(foo)); - - if (ret < 0) - srand(fd + foo); - close(fd); + if (getrandom(&foo, sizeof(foo), 0) == -1) { + perror("getrandom"); + exit(1); } srand(foo); -- cgit v1.2.3 From edecf1689768452ba1a64b7aaf3a47a817da651a Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Mon, 27 Nov 2023 20:53:52 -0700 Subject: io_uring: enable io_mem_alloc/free to be used in other parts In preparation for using these helpers, make them non-static and add them to our internal header. Signed-off-by: Jens Axboe --- io_uring/io_uring.c | 4 ++-- io_uring/io_uring.h | 3 +++ 2 files changed, 5 insertions(+), 2 deletions(-) diff --git a/io_uring/io_uring.c b/io_uring/io_uring.c index 52e4b14ad8aa..e40b11438210 100644 --- a/io_uring/io_uring.c +++ b/io_uring/io_uring.c @@ -2666,7 +2666,7 @@ static int io_cqring_wait(struct io_ring_ctx *ctx, int min_events, return READ_ONCE(rings->cq.head) == READ_ONCE(rings->cq.tail) ? ret : 0; } -static void io_mem_free(void *ptr) +void io_mem_free(void *ptr) { if (!ptr) return; @@ -2778,7 +2778,7 @@ static void io_rings_free(struct io_ring_ctx *ctx) } } -static void *io_mem_alloc(size_t size) +void *io_mem_alloc(size_t size) { gfp_t gfp = GFP_KERNEL_ACCOUNT | __GFP_ZERO | __GFP_NOWARN | __GFP_COMP; void *ret; diff --git a/io_uring/io_uring.h b/io_uring/io_uring.h index dc6d779b452b..ed84f2737b3a 100644 --- a/io_uring/io_uring.h +++ b/io_uring/io_uring.h @@ -86,6 +86,9 @@ bool __io_alloc_req_refill(struct io_ring_ctx *ctx); bool io_match_task_safe(struct io_kiocb *head, struct task_struct *task, bool cancel_all); +void *io_mem_alloc(size_t size); +void io_mem_free(void *ptr); + #if defined(CONFIG_PROVE_LOCKING) static inline void io_lockdep_assert_cq_locked(struct io_ring_ctx *ctx) { -- cgit v1.2.3 From e199bf52ffda8f98f129728d57244a9cd9ad5623 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Fri, 24 Nov 2023 19:01:36 +0100 Subject: soundwire: stream: fix NULL pointer dereference for multi_link If bus is marked as multi_link, but number of masters in the stream is not higher than bus->hw_sync_min_links (bus->multi_link && m_rt_count >= bus->hw_sync_min_links), bank switching should not happen. The first part of do_bank_switch() code properly takes these conditions into account, but second part (sdw_ml_sync_bank_switch()) relies purely on bus->multi_link property. This is not balanced and leads to NULL pointer dereference: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 ... Call trace: wait_for_completion_timeout+0x124/0x1f0 do_bank_switch+0x370/0x6f8 sdw_prepare_stream+0x2d0/0x438 qcom_snd_sdw_prepare+0xa0/0x118 sm8450_snd_prepare+0x128/0x148 snd_soc_link_prepare+0x5c/0xe8 __soc_pcm_prepare+0x28/0x1ec dpcm_be_dai_prepare+0x1e0/0x2c0 dpcm_fe_dai_prepare+0x108/0x28c snd_pcm_do_prepare+0x44/0x68 snd_pcm_action_single+0x54/0xc0 snd_pcm_action_nonatomic+0xe4/0xec snd_pcm_prepare+0xc4/0x114 snd_pcm_common_ioctl+0x1154/0x1cc0 snd_pcm_ioctl+0x54/0x74 Fixes: ce6e74d008ff ("soundwire: Add support for multi link bank switch") Cc: stable@vger.kernel.org Signed-off-by: Krzysztof Kozlowski Reviewed-by: Pierre-Louis Bossart Link: https://lore.kernel.org/r/20231124180136.390621-1-krzysztof.kozlowski@linaro.org Signed-off-by: Vinod Koul --- drivers/soundwire/stream.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/soundwire/stream.c b/drivers/soundwire/stream.c index 69719b335bcb..f048b3d55b2e 100644 --- a/drivers/soundwire/stream.c +++ b/drivers/soundwire/stream.c @@ -742,14 +742,15 @@ error_1: * sdw_ml_sync_bank_switch: Multilink register bank switch * * @bus: SDW bus instance + * @multi_link: whether this is a multi-link stream with hardware-based sync * * Caller function should free the buffers on error */ -static int sdw_ml_sync_bank_switch(struct sdw_bus *bus) +static int sdw_ml_sync_bank_switch(struct sdw_bus *bus, bool multi_link) { unsigned long time_left; - if (!bus->multi_link) + if (!multi_link) return 0; /* Wait for completion of transfer */ @@ -847,7 +848,7 @@ static int do_bank_switch(struct sdw_stream_runtime *stream) bus->bank_switch_timeout = DEFAULT_BANK_SWITCH_TIMEOUT; /* Check if bank switch was successful */ - ret = sdw_ml_sync_bank_switch(bus); + ret = sdw_ml_sync_bank_switch(bus, multi_link); if (ret < 0) { dev_err(bus->dev, "multi link bank switch failed: %d\n", ret); -- cgit v1.2.3 From baaacbff64d9f34b64f294431966d035aeadb81c Mon Sep 17 00:00:00 2001 From: Kailang Yang Date: Wed, 25 Oct 2023 15:24:06 +0800 Subject: ALSA: hda/realtek: Headset Mic VREF to 100% This platform need to set Mic VREF to 100%. Signed-off-by: Kailang Yang Cc: Link: https://lore.kernel.org/r/0916af40f08a4348a3298a9a59e6967e@realtek.com Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 079876b7b3e7..0021f0f145a9 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -1987,6 +1987,7 @@ enum { ALC887_FIXUP_ASUS_AUDIO, ALC887_FIXUP_ASUS_HMIC, ALCS1200A_FIXUP_MIC_VREF, + ALC888VD_FIXUP_MIC_100VREF, }; static void alc889_fixup_coef(struct hda_codec *codec, @@ -2540,6 +2541,13 @@ static const struct hda_fixup alc882_fixups[] = { {} } }, + [ALC888VD_FIXUP_MIC_100VREF] = { + .type = HDA_FIXUP_PINCTLS, + .v.pins = (const struct hda_pintbl[]) { + { 0x18, PIN_VREF100 }, /* headset mic */ + {} + } + }, }; static const struct snd_pci_quirk alc882_fixup_tbl[] = { @@ -2609,6 +2617,7 @@ static const struct snd_pci_quirk alc882_fixup_tbl[] = { SND_PCI_QUIRK(0x106b, 0x4a00, "Macbook 5,2", ALC889_FIXUP_MBA11_VREF), SND_PCI_QUIRK(0x1071, 0x8258, "Evesham Voyaeger", ALC882_FIXUP_EAPD), + SND_PCI_QUIRK(0x10ec, 0x12d8, "iBase Elo Touch", ALC888VD_FIXUP_MIC_100VREF), SND_PCI_QUIRK(0x13fe, 0x1009, "Advantech MIT-W101", ALC886_FIXUP_EAPD), SND_PCI_QUIRK(0x1458, 0xa002, "Gigabyte EP45-DS3/Z87X-UD3H", ALC889_FIXUP_FRONT_HP_NO_PRESENCE), SND_PCI_QUIRK(0x1458, 0xa0b8, "Gigabyte AZ370-Gaming", ALC1220_FIXUP_GB_DUAL_CODECS), -- cgit v1.2.3 From 98dcc6be3859fb15257750b8e1d4e0eefd2c5e1e Mon Sep 17 00:00:00 2001 From: Finley Xiao Date: Mon, 27 Nov 2023 19:14:16 +0100 Subject: clk: rockchip: rk3128: Fix aclk_peri_src's parent According to the TRM there are no specific gpll_peri, cpll_peri, gpll_div2_peri or gpll_div3_peri gates, but a single clk_peri_src gate. Instead mux_clk_peri_src directly connects to the plls respectively the pll divider clocks. Fix this by creating a single gated composite. Also rename all occurrences of aclk_peri_src to clk_peri_src, since it is the parent for peri aclks, pclks and hclks. That name also matches the one used in the TRM. Fixes: f6022e88faca ("clk: rockchip: add clock controller for rk3128") Signed-off-by: Finley Xiao [renamed aclk_peri_src -> clk_peri_src and added commit message] Signed-off-by: Alex Bee Link: https://lore.kernel.org/r/20231127181415.11735-4-knaerzche@gmail.com Signed-off-by: Heiko Stuebner --- drivers/clk/rockchip/clk-rk3128.c | 20 +++++++------------- 1 file changed, 7 insertions(+), 13 deletions(-) diff --git a/drivers/clk/rockchip/clk-rk3128.c b/drivers/clk/rockchip/clk-rk3128.c index 7782785a86e6..17bacf6dd6e7 100644 --- a/drivers/clk/rockchip/clk-rk3128.c +++ b/drivers/clk/rockchip/clk-rk3128.c @@ -138,7 +138,7 @@ PNAME(mux_pll_src_5plls_p) = { "cpll", "gpll", "gpll_div2", "gpll_div3", "usb480 PNAME(mux_pll_src_4plls_p) = { "cpll", "gpll", "gpll_div2", "usb480m" }; PNAME(mux_pll_src_3plls_p) = { "cpll", "gpll", "gpll_div2" }; -PNAME(mux_aclk_peri_src_p) = { "gpll_peri", "cpll_peri", "gpll_div2_peri", "gpll_div3_peri" }; +PNAME(mux_clk_peri_src_p) = { "gpll", "cpll", "gpll_div2", "gpll_div3" }; PNAME(mux_mmc_src_p) = { "cpll", "gpll", "gpll_div2", "xin24m" }; PNAME(mux_clk_cif_out_src_p) = { "clk_cif_src", "xin24m" }; PNAME(mux_sclk_vop_src_p) = { "cpll", "gpll", "gpll_div2", "gpll_div3" }; @@ -275,23 +275,17 @@ static struct rockchip_clk_branch common_clk_branches[] __initdata = { RK2928_CLKGATE_CON(0), 11, GFLAGS), /* PD_PERI */ - GATE(0, "gpll_peri", "gpll", CLK_IGNORE_UNUSED, + COMPOSITE(0, "clk_peri_src", mux_clk_peri_src_p, 0, + RK2928_CLKSEL_CON(10), 14, 2, MFLAGS, 0, 5, DFLAGS, RK2928_CLKGATE_CON(2), 0, GFLAGS), - GATE(0, "cpll_peri", "cpll", CLK_IGNORE_UNUSED, - RK2928_CLKGATE_CON(2), 0, GFLAGS), - GATE(0, "gpll_div2_peri", "gpll_div2", CLK_IGNORE_UNUSED, - RK2928_CLKGATE_CON(2), 0, GFLAGS), - GATE(0, "gpll_div3_peri", "gpll_div3", CLK_IGNORE_UNUSED, - RK2928_CLKGATE_CON(2), 0, GFLAGS), - COMPOSITE_NOGATE(0, "aclk_peri_src", mux_aclk_peri_src_p, 0, - RK2928_CLKSEL_CON(10), 14, 2, MFLAGS, 0, 5, DFLAGS), - COMPOSITE_NOMUX(PCLK_PERI, "pclk_peri", "aclk_peri_src", 0, + + COMPOSITE_NOMUX(PCLK_PERI, "pclk_peri", "clk_peri_src", 0, RK2928_CLKSEL_CON(10), 12, 2, DFLAGS | CLK_DIVIDER_POWER_OF_TWO, RK2928_CLKGATE_CON(2), 3, GFLAGS), - COMPOSITE_NOMUX(HCLK_PERI, "hclk_peri", "aclk_peri_src", 0, + COMPOSITE_NOMUX(HCLK_PERI, "hclk_peri", "clk_peri_src", 0, RK2928_CLKSEL_CON(10), 8, 2, DFLAGS | CLK_DIVIDER_POWER_OF_TWO, RK2928_CLKGATE_CON(2), 2, GFLAGS), - GATE(ACLK_PERI, "aclk_peri", "aclk_peri_src", 0, + GATE(ACLK_PERI, "aclk_peri", "clk_peri_src", 0, RK2928_CLKGATE_CON(2), 1, GFLAGS), GATE(SCLK_TIMER0, "sclk_timer0", "xin24m", 0, -- cgit v1.2.3 From 99fe9ee56bd2f7358f1bc72551c2f3a6bbddf80a Mon Sep 17 00:00:00 2001 From: Alex Bee Date: Mon, 27 Nov 2023 19:14:18 +0100 Subject: clk: rockchip: rk3128: Fix SCLK_SDMMC's clock name SCLK_SDMMC is the parent for SCLK_SDMMC_DRV and SCLK_SDMMC_SAMPLE, but used with the (more) correct name sclk_sdmmc. SD card tuning does currently fail as the parent can't be found under that name. There is no need to suffix the name with '0' since RK312x SoCs do have a single sdmmc controller - so rename it to the name which is already used by it's children. Fixes: f6022e88faca ("clk: rockchip: add clock controller for rk3128") Signed-off-by: Alex Bee Link: https://lore.kernel.org/r/20231127181415.11735-6-knaerzche@gmail.com Signed-off-by: Heiko Stuebner --- drivers/clk/rockchip/clk-rk3128.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/clk/rockchip/clk-rk3128.c b/drivers/clk/rockchip/clk-rk3128.c index 17bacf6dd6e7..75071e0cd321 100644 --- a/drivers/clk/rockchip/clk-rk3128.c +++ b/drivers/clk/rockchip/clk-rk3128.c @@ -310,7 +310,7 @@ static struct rockchip_clk_branch common_clk_branches[] __initdata = { GATE(SCLK_MIPI_24M, "clk_mipi_24m", "xin24m", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(2), 15, GFLAGS), - COMPOSITE(SCLK_SDMMC, "sclk_sdmmc0", mux_mmc_src_p, 0, + COMPOSITE(SCLK_SDMMC, "sclk_sdmmc", mux_mmc_src_p, 0, RK2928_CLKSEL_CON(11), 6, 2, MFLAGS, 0, 6, DFLAGS, RK2928_CLKGATE_CON(2), 11, GFLAGS), -- cgit v1.2.3 From ad31c629ca3c87f6d557488c1f9faaebfbcd203c Mon Sep 17 00:00:00 2001 From: Elena Salomatkina Date: Sat, 25 Nov 2023 00:08:02 +0300 Subject: octeontx2-af: Fix possible buffer overflow A loop in rvu_mbox_handler_nix_bandprof_free() contains a break if (idx == MAX_BANDPROF_PER_PFFUNC), but if idx may reach MAX_BANDPROF_PER_PFFUNC buffer '(*req->prof_idx)[layer]' overflow happens before that check. The patch moves the break to the beginning of the loop. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: e8e095b3b370 ("octeontx2-af: cn10k: Bandwidth profiles config support"). Signed-off-by: Elena Salomatkina Reviewed-by: Simon Horman Reviewed-by: Subbaraya Sundeep Link: https://lore.kernel.org/r/20231124210802.109763-1-elena.salomatkina.cmc@gmail.com Signed-off-by: Paolo Abeni --- drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c b/drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c index 23c2f2ed2fb8..c112c71ff576 100644 --- a/drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c +++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c @@ -5505,6 +5505,8 @@ int rvu_mbox_handler_nix_bandprof_free(struct rvu *rvu, ipolicer = &nix_hw->ipolicer[layer]; for (idx = 0; idx < req->prof_count[layer]; idx++) { + if (idx == MAX_BANDPROF_PER_PFFUNC) + break; prof_idx = req->prof_idx[layer][idx]; if (prof_idx >= ipolicer->band_prof.max || ipolicer->pfvf_map[prof_idx] != pcifunc) @@ -5518,8 +5520,6 @@ int rvu_mbox_handler_nix_bandprof_free(struct rvu *rvu, ipolicer->pfvf_map[prof_idx] = 0x00; ipolicer->match_id[prof_idx] = 0; rvu_free_rsrc(&ipolicer->band_prof, prof_idx); - if (idx == MAX_BANDPROF_PER_PFFUNC) - break; } } mutex_unlock(&rvu->rsrc_lock); -- cgit v1.2.3 From 393cae5f32d640b9798903702018a48c7a45e59f Mon Sep 17 00:00:00 2001 From: Chao Song Date: Mon, 27 Nov 2023 20:47:35 +0800 Subject: soundwire: intel_ace2x: fix AC timing setting for ACE2.x Start from ACE1.x, DOAISE is added to AC timing control register bit 5, it combines with DOAIS to get effective timing, and has the default value 1. The current code fills DOAIS, DACTQE and DODS bits to a variable initialized to zero, and updates the variable to AC timing control register. With this operation, We change DOAISE to 0, and force a much more aggressive timing. The timing is even unable to form a working waveform on SDA pin. This patch uses read-modify-write operation for the AC timing control register access, thus makes sure those bits not supposed and intended to change are not touched. Signed-off-by: Chao Song Reviewed-by: Pierre-Louis Bossart Signed-off-by: Bard Liao Link: https://lore.kernel.org/r/20231127124735.2080562-1-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul --- drivers/soundwire/intel_ace2x.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/soundwire/intel_ace2x.c b/drivers/soundwire/intel_ace2x.c index 82672fcbc2aa..8280baa3254b 100644 --- a/drivers/soundwire/intel_ace2x.c +++ b/drivers/soundwire/intel_ace2x.c @@ -23,8 +23,9 @@ static void intel_shim_vs_init(struct sdw_intel *sdw) { void __iomem *shim_vs = sdw->link_res->shim_vs; - u16 act = 0; + u16 act; + act = intel_readw(shim_vs, SDW_SHIM2_INTEL_VS_ACTMCTL); u16p_replace_bits(&act, 0x1, SDW_SHIM2_INTEL_VS_ACTMCTL_DOAIS); act |= SDW_SHIM2_INTEL_VS_ACTMCTL_DACTQE; act |= SDW_SHIM2_INTEL_VS_ACTMCTL_DODS; -- cgit v1.2.3 From 0c349b5001f8bdcead844484c15a0c4dfb341157 Mon Sep 17 00:00:00 2001 From: Alex Bee Date: Mon, 27 Nov 2023 19:46:44 +0100 Subject: ARM: dts: rockchip: Fix sdmmc_pwren's pinmux setting for RK3128 RK3128's reference design uses sdmmc_pwren pincontrol as GPIO - see [0]. Let's change it in the SoC DT as well. [0] https://github.com/rockchip-linux/kernel/commit/8c62deaf6025 Fixes: a0201bff6259 ("ARM: dts: rockchip: add rk3128 soc dtsi") Signed-off-by: Alex Bee Link: https://lore.kernel.org/r/20231127184643.13314-2-knaerzche@gmail.com Signed-off-by: Heiko Stuebner --- arch/arm/boot/dts/rockchip/rk3128.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/rockchip/rk3128.dtsi b/arch/arm/boot/dts/rockchip/rk3128.dtsi index 7bf557c99561..01edf244ddee 100644 --- a/arch/arm/boot/dts/rockchip/rk3128.dtsi +++ b/arch/arm/boot/dts/rockchip/rk3128.dtsi @@ -848,7 +848,7 @@ }; sdmmc_pwren: sdmmc-pwren { - rockchip,pins = <1 RK_PB6 1 &pcfg_pull_default>; + rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_default>; }; sdmmc_bus4: sdmmc-bus4 { -- cgit v1.2.3 From c13f87efa7488fcd5f4d6e89c8f9d5bb072f9e6e Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Tue, 28 Nov 2023 00:10:20 +0100 Subject: Revert "drm/bridge: panel: Check device dependency before managing device link" This reverts commit 39d5b6a64ace77d0c11c398d272218df5f939abb. This patch was causing build errors by using an unexported function from the device core, which Greg questions the saneness in exporting. Link: https://lore.kernel.org/lkml/CACRpkdaGzXD6HbiX7mVUNJAJtMEPG00Pp6+nJ1P0JrfJ-ArMvQ@mail.gmail.com/T/ Signed-off-by: Linus Walleij Acked-by: Neil Armstrong Link: https://lore.kernel.org/r/20231128-revert-panel-fix-v1-2-69bb05048dae@linaro.org Signed-off-by: Neil Armstrong Link: https://patchwork.freedesktop.org/patch/msgid/20231128-revert-panel-fix-v1-2-69bb05048dae@linaro.org --- drivers/gpu/drm/bridge/panel.c | 27 +++++++++------------------ 1 file changed, 9 insertions(+), 18 deletions(-) diff --git a/drivers/gpu/drm/bridge/panel.c b/drivers/gpu/drm/bridge/panel.c index 5e8980023407..e48823a4f1ed 100644 --- a/drivers/gpu/drm/bridge/panel.c +++ b/drivers/gpu/drm/bridge/panel.c @@ -23,7 +23,6 @@ struct panel_bridge { struct drm_panel *panel; struct device_link *link; u32 connector_type; - bool is_independent; }; static inline struct panel_bridge * @@ -68,17 +67,12 @@ static int panel_bridge_attach(struct drm_bridge *bridge, struct drm_device *drm_dev = bridge->dev; int ret; - panel_bridge->is_independent = !device_is_dependent(drm_dev->dev, - panel->dev); - - if (panel_bridge->is_independent) { - panel_bridge->link = device_link_add(drm_dev->dev, panel->dev, - DL_FLAG_STATELESS); - if (!panel_bridge->link) { - DRM_ERROR("Failed to add device link between %s and %s\n", - dev_name(drm_dev->dev), dev_name(panel->dev)); - return -EINVAL; - } + panel_bridge->link = device_link_add(drm_dev->dev, panel->dev, + DL_FLAG_STATELESS); + if (!panel_bridge->link) { + DRM_ERROR("Failed to add device link between %s and %s\n", + dev_name(drm_dev->dev), dev_name(panel->dev)); + return -EINVAL; } if (flags & DRM_BRIDGE_ATTACH_NO_CONNECTOR) @@ -86,8 +80,7 @@ static int panel_bridge_attach(struct drm_bridge *bridge, if (!bridge->encoder) { DRM_ERROR("Missing encoder\n"); - if (panel_bridge->is_independent) - device_link_del(panel_bridge->link); + device_link_del(panel_bridge->link); return -ENODEV; } @@ -99,8 +92,7 @@ static int panel_bridge_attach(struct drm_bridge *bridge, panel_bridge->connector_type); if (ret) { DRM_ERROR("Failed to initialize connector\n"); - if (panel_bridge->is_independent) - device_link_del(panel_bridge->link); + device_link_del(panel_bridge->link); return ret; } @@ -123,8 +115,7 @@ static void panel_bridge_detach(struct drm_bridge *bridge) struct panel_bridge *panel_bridge = drm_bridge_to_panel_bridge(bridge); struct drm_connector *connector = &panel_bridge->connector; - if (panel_bridge->is_independent) - device_link_del(panel_bridge->link); + device_link_del(panel_bridge->link); /* * Cleanup the connector if we know it was initialized. -- cgit v1.2.3 From 8dd926689dfa9d8ee64e4fce202d0fdc91fd69fd Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Tue, 28 Nov 2023 00:10:19 +0100 Subject: Revert "driver core: Export device_is_dependent() to modules" This reverts commit 1d5e8f4bf06da86b71cc9169110d1a0e1e7af337. Greg says: "why exactly is this needed? Nothing outside of the driver core should be needing this function, it shouldn't be public at all (I missed that before.) So please, revert it for now, let's figure out why DRM thinks this is needed for it's devices, and yet no other bus/subsystem does." Link: https://lore.kernel.org/dri-devel/2023112739-willing-sighing-6bdd@gregkh/ Signed-off-by: Linus Walleij Acked-by: Neil Armstrong Link: https://lore.kernel.org/r/20231128-revert-panel-fix-v1-1-69bb05048dae@linaro.org Signed-off-by: Neil Armstrong Link: https://patchwork.freedesktop.org/patch/msgid/20231128-revert-panel-fix-v1-1-69bb05048dae@linaro.org --- drivers/base/core.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/base/core.c b/drivers/base/core.c index bfd2bf0364b7..67ba592afc77 100644 --- a/drivers/base/core.c +++ b/drivers/base/core.c @@ -328,7 +328,6 @@ int device_is_dependent(struct device *dev, void *target) } return ret; } -EXPORT_SYMBOL_GPL(device_is_dependent); static void device_link_init_status(struct device_link *link, struct device *consumer, -- cgit v1.2.3 From 9b6a59e5db87c2c6b3ca0391176ed4358623d5e4 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Tue, 28 Nov 2023 00:10:21 +0100 Subject: Revert "drm/bridge: panel: Add a device link between drm device and panel device" This reverts commit 199cf07ebd2b0d41185ac79b895547d45610b681. This patch creates bugs on devices where the DRM device is the ancestor of the panel devices. Attempts to fix this have failed because it leads to using device core functionality which is questionable. Reported-by: Linus Walleij Link: https://lore.kernel.org/lkml/CACRpkdaGzXD6HbiX7mVUNJAJtMEPG00Pp6+nJ1P0JrfJ-ArMvQ@mail.gmail.com/T/ Signed-off-by: Linus Walleij Acked-by: Neil Armstrong Link: https://lore.kernel.org/r/20231128-revert-panel-fix-v1-3-69bb05048dae@linaro.org Signed-off-by: Neil Armstrong Link: https://patchwork.freedesktop.org/patch/msgid/20231128-revert-panel-fix-v1-3-69bb05048dae@linaro.org --- drivers/gpu/drm/bridge/panel.c | 17 ----------------- 1 file changed, 17 deletions(-) diff --git a/drivers/gpu/drm/bridge/panel.c b/drivers/gpu/drm/bridge/panel.c index e48823a4f1ed..7f41525f7a6e 100644 --- a/drivers/gpu/drm/bridge/panel.c +++ b/drivers/gpu/drm/bridge/panel.c @@ -4,8 +4,6 @@ * Copyright (C) 2017 Broadcom */ -#include - #include #include #include @@ -21,7 +19,6 @@ struct panel_bridge { struct drm_bridge bridge; struct drm_connector connector; struct drm_panel *panel; - struct device_link *link; u32 connector_type; }; @@ -63,24 +60,13 @@ static int panel_bridge_attach(struct drm_bridge *bridge, { struct panel_bridge *panel_bridge = drm_bridge_to_panel_bridge(bridge); struct drm_connector *connector = &panel_bridge->connector; - struct drm_panel *panel = panel_bridge->panel; - struct drm_device *drm_dev = bridge->dev; int ret; - panel_bridge->link = device_link_add(drm_dev->dev, panel->dev, - DL_FLAG_STATELESS); - if (!panel_bridge->link) { - DRM_ERROR("Failed to add device link between %s and %s\n", - dev_name(drm_dev->dev), dev_name(panel->dev)); - return -EINVAL; - } - if (flags & DRM_BRIDGE_ATTACH_NO_CONNECTOR) return 0; if (!bridge->encoder) { DRM_ERROR("Missing encoder\n"); - device_link_del(panel_bridge->link); return -ENODEV; } @@ -92,7 +78,6 @@ static int panel_bridge_attach(struct drm_bridge *bridge, panel_bridge->connector_type); if (ret) { DRM_ERROR("Failed to initialize connector\n"); - device_link_del(panel_bridge->link); return ret; } @@ -115,8 +100,6 @@ static void panel_bridge_detach(struct drm_bridge *bridge) struct panel_bridge *panel_bridge = drm_bridge_to_panel_bridge(bridge); struct drm_connector *connector = &panel_bridge->connector; - device_link_del(panel_bridge->link); - /* * Cleanup the connector if we know it was initialized. * -- cgit v1.2.3 From b9c02e1052650af56d4487efa5fade3fb70e3653 Mon Sep 17 00:00:00 2001 From: Thomas Hellström Date: Mon, 6 Nov 2023 12:48:27 +0100 Subject: drm/gpuvm: Fix deprecated license identifier MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit "GPL-2.0-only" in the license header was incorrectly changed to the now deprecated "GPL-2.0". Fix. Cc: Maxime Ripard Cc: Danilo Krummrich Reported-by: David Edelsohn Closes: https://lore.kernel.org/dri-devel/5lfrhdpkwhpgzipgngojs3tyqfqbesifzu5nf4l5q3nhfdhcf2@25nmiq7tfrew/T/#m5c356d68815711eea30dd94cc6f7ea8cd4344fe3 Fixes: f7749a549b4f ("drm/gpuvm: Dual-licence the drm_gpuvm code GPL-2.0 OR MIT") Signed-off-by: Thomas Hellström Acked-by: Maxime Ripard Acked-by: Danilo Krummrich Link: https://patchwork.freedesktop.org/patch/msgid/20231106114827.62492-1-thomas.hellstrom@linux.intel.com --- drivers/gpu/drm/drm_gpuvm.c | 2 +- include/drm/drm_gpuvm.h | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/drm_gpuvm.c b/drivers/gpu/drm/drm_gpuvm.c index 08c088319652..b80d4e1cc9b7 100644 --- a/drivers/gpu/drm/drm_gpuvm.c +++ b/drivers/gpu/drm/drm_gpuvm.c @@ -1,4 +1,4 @@ -// SPDX-License-Identifier: GPL-2.0 OR MIT +// SPDX-License-Identifier: GPL-2.0-only OR MIT /* * Copyright (c) 2022 Red Hat. * diff --git a/include/drm/drm_gpuvm.h b/include/drm/drm_gpuvm.h index bdfafc4a7705..c7a0594bdab1 100644 --- a/include/drm/drm_gpuvm.h +++ b/include/drm/drm_gpuvm.h @@ -1,4 +1,4 @@ -/* SPDX-License-Identifier: GPL-2.0 OR MIT */ +/* SPDX-License-Identifier: GPL-2.0-only OR MIT */ #ifndef __DRM_GPUVM_H__ #define __DRM_GPUVM_H__ -- cgit v1.2.3 From e54d628a2721bfbb002c19f6e8ca6746cec7640f Mon Sep 17 00:00:00 2001 From: Furong Xu <0x1207@gmail.com> Date: Sat, 25 Nov 2023 14:01:26 +0800 Subject: net: stmmac: xgmac: Disable FPE MMC interrupts Commit aeb18dd07692 ("net: stmmac: xgmac: Disable MMC interrupts by default") tries to disable MMC interrupts to avoid a storm of unhandled interrupts, but leaves the FPE(Frame Preemption) MMC interrupts enabled, FPE MMC interrupts can cause the same problem. Now we mask FPE TX and RX interrupts to disable all MMC interrupts. Fixes: aeb18dd07692 ("net: stmmac: xgmac: Disable MMC interrupts by default") Reviewed-by: Larysa Zaremba Signed-off-by: Furong Xu <0x1207@gmail.com> Reviewed-by: Serge Semin Reviewed-by: Wojciech Drewek Link: https://lore.kernel.org/r/20231125060126.2328690-1-0x1207@gmail.com Signed-off-by: Paolo Abeni --- drivers/net/ethernet/stmicro/stmmac/mmc_core.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/net/ethernet/stmicro/stmmac/mmc_core.c b/drivers/net/ethernet/stmicro/stmmac/mmc_core.c index ea4910ae0921..6a7c1d325c46 100644 --- a/drivers/net/ethernet/stmicro/stmmac/mmc_core.c +++ b/drivers/net/ethernet/stmicro/stmmac/mmc_core.c @@ -177,8 +177,10 @@ #define MMC_XGMAC_RX_DISCARD_OCT_GB 0x1b4 #define MMC_XGMAC_RX_ALIGN_ERR_PKT 0x1bc +#define MMC_XGMAC_TX_FPE_INTR_MASK 0x204 #define MMC_XGMAC_TX_FPE_FRAG 0x208 #define MMC_XGMAC_TX_HOLD_REQ 0x20c +#define MMC_XGMAC_RX_FPE_INTR_MASK 0x224 #define MMC_XGMAC_RX_PKT_ASSEMBLY_ERR 0x228 #define MMC_XGMAC_RX_PKT_SMD_ERR 0x22c #define MMC_XGMAC_RX_PKT_ASSEMBLY_OK 0x230 @@ -352,6 +354,8 @@ static void dwxgmac_mmc_intr_all_mask(void __iomem *mmcaddr) { writel(0x0, mmcaddr + MMC_RX_INTR_MASK); writel(0x0, mmcaddr + MMC_TX_INTR_MASK); + writel(MMC_DEFAULT_MASK, mmcaddr + MMC_XGMAC_TX_FPE_INTR_MASK); + writel(MMC_DEFAULT_MASK, mmcaddr + MMC_XGMAC_RX_FPE_INTR_MASK); writel(MMC_DEFAULT_MASK, mmcaddr + MMC_XGMAC_RX_IPC_INTR_MASK); } -- cgit v1.2.3 From 51597219e0cd5157401d4d0ccb5daa4d9961676f Mon Sep 17 00:00:00 2001 From: Geetha sowjanya Date: Sat, 25 Nov 2023 22:04:02 +0530 Subject: octeontx2-pf: Fix adding mbox work queue entry when num_vfs > 64 When more than 64 VFs are enabled for a PF then mbox communication between VF and PF is not working as mbox work queueing for few VFs are skipped due to wrong calculation of VF numbers. Fixes: d424b6c02415 ("octeontx2-pf: Enable SRIOV and added VF mbox handling") Signed-off-by: Geetha sowjanya Signed-off-by: Subbaraya Sundeep Link: https://lore.kernel.org/r/1700930042-5400-1-git-send-email-sbhatta@marvell.com Signed-off-by: Paolo Abeni --- drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c index ba95ac913274..6d56fc191845 100644 --- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c +++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c @@ -566,7 +566,9 @@ static irqreturn_t otx2_pfvf_mbox_intr_handler(int irq, void *pf_irq) otx2_write64(pf, RVU_PF_VFPF_MBOX_INTX(1), intr); otx2_queue_work(mbox, pf->mbox_pfvf_wq, 64, vfs, intr, TYPE_PFVF); - vfs -= 64; + if (intr) + trace_otx2_msg_interrupt(mbox->mbox.pdev, "VF(s) to PF", intr); + vfs = 64; } intr = otx2_read64(pf, RVU_PF_VFPF_MBOX_INTX(0)); @@ -574,7 +576,8 @@ static irqreturn_t otx2_pfvf_mbox_intr_handler(int irq, void *pf_irq) otx2_queue_work(mbox, pf->mbox_pfvf_wq, 0, vfs, intr, TYPE_PFVF); - trace_otx2_msg_interrupt(mbox->mbox.pdev, "VF(s) to PF", intr); + if (intr) + trace_otx2_msg_interrupt(mbox->mbox.pdev, "VF(s) to PF", intr); return IRQ_HANDLED; } -- cgit v1.2.3 From fd7f98b2e12a3d96a92bde6640657ec7116f4372 Mon Sep 17 00:00:00 2001 From: Subbaraya Sundeep Date: Sat, 25 Nov 2023 22:06:57 +0530 Subject: octeontx2-pf: Restore TC ingress police rules when interface is up TC ingress policer rules depends on interface receive queue contexts since the bandwidth profiles are attached to RQ contexts. When an interface is brought down all the queue contexts are freed. This in turn frees bandwidth profiles in hardware causing ingress police rules non-functional after the interface is brought up. Fix this by applying all the ingress police rules config to hardware in otx2_open. Also allow adding ingress rules only when interface is running since no contexts exist for the interface when it is down. Fixes: 68fbff68dbea ("octeontx2-pf: Add police action for TC flower") Signed-off-by: Subbaraya Sundeep Link: https://lore.kernel.org/r/1700930217-5707-1-git-send-email-sbhatta@marvell.com Signed-off-by: Paolo Abeni --- drivers/net/ethernet/marvell/octeontx2/nic/cn10k.c | 3 + .../ethernet/marvell/octeontx2/nic/otx2_common.h | 2 + .../net/ethernet/marvell/octeontx2/nic/otx2_pf.c | 2 + .../net/ethernet/marvell/octeontx2/nic/otx2_tc.c | 120 ++++++++++++++++----- 4 files changed, 102 insertions(+), 25 deletions(-) diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/cn10k.c b/drivers/net/ethernet/marvell/octeontx2/nic/cn10k.c index a4a258da8dd5..c1c99d7054f8 100644 --- a/drivers/net/ethernet/marvell/octeontx2/nic/cn10k.c +++ b/drivers/net/ethernet/marvell/octeontx2/nic/cn10k.c @@ -450,6 +450,9 @@ int cn10k_set_ipolicer_rate(struct otx2_nic *pfvf, u16 profile, aq->prof.pebs_mantissa = 0; aq->prof_mask.pebs_mantissa = 0xFF; + aq->prof.hl_en = 0; + aq->prof_mask.hl_en = 1; + /* Fill AQ info */ aq->qidx = profile; aq->ctype = NIX_AQ_CTYPE_BANDPROF; diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.h b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.h index e7c69b57147e..06910307085e 100644 --- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.h +++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.h @@ -1070,6 +1070,8 @@ int otx2_init_tc(struct otx2_nic *nic); void otx2_shutdown_tc(struct otx2_nic *nic); int otx2_setup_tc(struct net_device *netdev, enum tc_setup_type type, void *type_data); +void otx2_tc_apply_ingress_police_rules(struct otx2_nic *nic); + /* CGX/RPM DMAC filters support */ int otx2_dmacflt_get_max_cnt(struct otx2_nic *pf); int otx2_dmacflt_add(struct otx2_nic *pf, const u8 *mac, u32 bit_pos); diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c index 6d56fc191845..532e324bdcc8 100644 --- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c +++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c @@ -1873,6 +1873,8 @@ int otx2_open(struct net_device *netdev) if (pf->flags & OTX2_FLAG_DMACFLTR_SUPPORT) otx2_dmacflt_reinstall_flows(pf); + otx2_tc_apply_ingress_police_rules(pf); + err = otx2_rxtx_enable(pf, true); /* If a mbox communication error happens at this point then interface * will end up in a state such that it is in down state but hardware diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_tc.c b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_tc.c index 8a5e3987a482..db1e0e0e812d 100644 --- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_tc.c +++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_tc.c @@ -47,6 +47,9 @@ struct otx2_tc_flow { bool is_act_police; u32 prio; struct npc_install_flow_req req; + u64 rate; + u32 burst; + bool is_pps; }; static void otx2_get_egress_burst_cfg(struct otx2_nic *nic, u32 burst, @@ -284,21 +287,10 @@ static int otx2_tc_egress_matchall_delete(struct otx2_nic *nic, return err; } -static int otx2_tc_act_set_police(struct otx2_nic *nic, - struct otx2_tc_flow *node, - struct flow_cls_offload *f, - u64 rate, u32 burst, u32 mark, - struct npc_install_flow_req *req, bool pps) +static int otx2_tc_act_set_hw_police(struct otx2_nic *nic, + struct otx2_tc_flow *node) { - struct netlink_ext_ack *extack = f->common.extack; - struct otx2_hw *hw = &nic->hw; - int rq_idx, rc; - - rq_idx = find_first_zero_bit(&nic->rq_bmap, hw->rx_queues); - if (rq_idx >= hw->rx_queues) { - NL_SET_ERR_MSG_MOD(extack, "Police action rules exceeded"); - return -EINVAL; - } + int rc; mutex_lock(&nic->mbox.lock); @@ -308,23 +300,17 @@ static int otx2_tc_act_set_police(struct otx2_nic *nic, return rc; } - rc = cn10k_set_ipolicer_rate(nic, node->leaf_profile, burst, rate, pps); + rc = cn10k_set_ipolicer_rate(nic, node->leaf_profile, + node->burst, node->rate, node->is_pps); if (rc) goto free_leaf; - rc = cn10k_map_unmap_rq_policer(nic, rq_idx, node->leaf_profile, true); + rc = cn10k_map_unmap_rq_policer(nic, node->rq, node->leaf_profile, true); if (rc) goto free_leaf; mutex_unlock(&nic->mbox.lock); - req->match_id = mark & 0xFFFFULL; - req->index = rq_idx; - req->op = NIX_RX_ACTIONOP_UCAST; - set_bit(rq_idx, &nic->rq_bmap); - node->is_act_police = true; - node->rq = rq_idx; - return 0; free_leaf: @@ -336,6 +322,39 @@ free_leaf: return rc; } +static int otx2_tc_act_set_police(struct otx2_nic *nic, + struct otx2_tc_flow *node, + struct flow_cls_offload *f, + u64 rate, u32 burst, u32 mark, + struct npc_install_flow_req *req, bool pps) +{ + struct netlink_ext_ack *extack = f->common.extack; + struct otx2_hw *hw = &nic->hw; + int rq_idx, rc; + + rq_idx = find_first_zero_bit(&nic->rq_bmap, hw->rx_queues); + if (rq_idx >= hw->rx_queues) { + NL_SET_ERR_MSG_MOD(extack, "Police action rules exceeded"); + return -EINVAL; + } + + req->match_id = mark & 0xFFFFULL; + req->index = rq_idx; + req->op = NIX_RX_ACTIONOP_UCAST; + + node->is_act_police = true; + node->rq = rq_idx; + node->burst = burst; + node->rate = rate; + node->is_pps = pps; + + rc = otx2_tc_act_set_hw_police(nic, node); + if (!rc) + set_bit(rq_idx, &nic->rq_bmap); + + return rc; +} + static int otx2_tc_parse_actions(struct otx2_nic *nic, struct flow_action *flow_action, struct npc_install_flow_req *req, @@ -1044,6 +1063,11 @@ static int otx2_tc_del_flow(struct otx2_nic *nic, } if (flow_node->is_act_police) { + __clear_bit(flow_node->rq, &nic->rq_bmap); + + if (nic->flags & OTX2_FLAG_INTF_DOWN) + goto free_mcam_flow; + mutex_lock(&nic->mbox.lock); err = cn10k_map_unmap_rq_policer(nic, flow_node->rq, @@ -1059,11 +1083,10 @@ static int otx2_tc_del_flow(struct otx2_nic *nic, "Unable to free leaf bandwidth profile(%d)\n", flow_node->leaf_profile); - __clear_bit(flow_node->rq, &nic->rq_bmap); - mutex_unlock(&nic->mbox.lock); } +free_mcam_flow: otx2_del_mcam_flow_entry(nic, flow_node->entry, NULL); otx2_tc_update_mcam_table(nic, flow_cfg, flow_node, false); kfree_rcu(flow_node, rcu); @@ -1083,6 +1106,11 @@ static int otx2_tc_add_flow(struct otx2_nic *nic, if (!(nic->flags & OTX2_FLAG_TC_FLOWER_SUPPORT)) return -ENOMEM; + if (nic->flags & OTX2_FLAG_INTF_DOWN) { + NL_SET_ERR_MSG_MOD(extack, "Interface not initialized"); + return -EINVAL; + } + if (flow_cfg->nr_flows == flow_cfg->max_flows) { NL_SET_ERR_MSG_MOD(extack, "Free MCAM entry not available to add the flow"); @@ -1442,3 +1470,45 @@ void otx2_shutdown_tc(struct otx2_nic *nic) otx2_destroy_tc_flow_list(nic); } EXPORT_SYMBOL(otx2_shutdown_tc); + +static void otx2_tc_config_ingress_rule(struct otx2_nic *nic, + struct otx2_tc_flow *node) +{ + struct npc_install_flow_req *req; + + if (otx2_tc_act_set_hw_police(nic, node)) + return; + + mutex_lock(&nic->mbox.lock); + + req = otx2_mbox_alloc_msg_npc_install_flow(&nic->mbox); + if (!req) + goto err; + + memcpy(req, &node->req, sizeof(struct npc_install_flow_req)); + + if (otx2_sync_mbox_msg(&nic->mbox)) + netdev_err(nic->netdev, + "Failed to install MCAM flow entry for ingress rule"); +err: + mutex_unlock(&nic->mbox.lock); +} + +void otx2_tc_apply_ingress_police_rules(struct otx2_nic *nic) +{ + struct otx2_flow_config *flow_cfg = nic->flow_cfg; + struct otx2_tc_flow *node; + + /* If any ingress policer rules exist for the interface then + * apply those rules. Ingress policer rules depend on bandwidth + * profiles linked to the receive queues. Since no receive queues + * exist when interface is down, ingress policer rules are stored + * and configured in hardware after all receive queues are allocated + * in otx2_open. + */ + list_for_each_entry(node, &flow_cfg->flow_list_tc, list) { + if (node->is_act_police) + otx2_tc_config_ingress_rule(nic, node); + } +} +EXPORT_SYMBOL(otx2_tc_apply_ingress_police_rules); -- cgit v1.2.3 From 45b3fae4675dc1d4ee2d7aefa19d85ee4f891377 Mon Sep 17 00:00:00 2001 From: "Gustavo A. R. Silva" Date: Sat, 25 Nov 2023 15:33:58 -0600 Subject: neighbour: Fix __randomize_layout crash in struct neighbour Previously, one-element and zero-length arrays were treated as true flexible arrays, even though they are actually "fake" flex arrays. The __randomize_layout would leave them untouched at the end of the struct, similarly to proper C99 flex-array members. However, this approach changed with commit 1ee60356c2dc ("gcc-plugins: randstruct: Only warn about true flexible arrays"). Now, only C99 flexible-array members will remain untouched at the end of the struct, while one-element and zero-length arrays will be subject to randomization. Fix a `__randomize_layout` crash in `struct neighbour` by transforming zero-length array `primary_key` into a proper C99 flexible-array member. Fixes: 1ee60356c2dc ("gcc-plugins: randstruct: Only warn about true flexible arrays") Closes: https://lore.kernel.org/linux-hardening/20231124102458.GB1503258@e124191.cambridge.arm.com/ Signed-off-by: Gustavo A. R. Silva Reviewed-by: Kees Cook Tested-by: Joey Gouly Link: https://lore.kernel.org/r/ZWJoRsJGnCPdJ3+2@work Signed-off-by: Paolo Abeni --- include/net/neighbour.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/net/neighbour.h b/include/net/neighbour.h index 07022bb0d44d..0d28172193fa 100644 --- a/include/net/neighbour.h +++ b/include/net/neighbour.h @@ -162,7 +162,7 @@ struct neighbour { struct rcu_head rcu; struct net_device *dev; netdevice_tracker dev_tracker; - u8 primary_key[0]; + u8 primary_key[]; } __randomize_layout; struct neigh_ops { -- cgit v1.2.3 From db2832309a82b9acc4b8cc33a1831d36507ec13e Mon Sep 17 00:00:00 2001 From: Juergen Gross Date: Fri, 24 Nov 2023 08:48:52 +0100 Subject: x86/xen: fix percpu vcpu_info allocation Today the percpu struct vcpu_info is allocated via DEFINE_PER_CPU(), meaning that it could cross a page boundary. In this case registering it with the hypervisor will fail, resulting in a panic(). This can easily be fixed by using DEFINE_PER_CPU_ALIGNED() instead, as struct vcpu_info is guaranteed to have a size of 64 bytes, matching the cache line size of x86 64-bit processors (Xen doesn't support 32-bit processors). Fixes: 5ead97c84fa7 ("xen: Core Xen implementation") Signed-off-by: Juergen Gross Reviewed-by: Boris Ostrovsky Link: https://lore.kernel.org/r/20231124074852.25161-1-jgross@suse.com Signed-off-by: Juergen Gross --- arch/x86/xen/enlighten.c | 6 +++++- arch/x86/xen/xen-ops.h | 2 +- 2 files changed, 6 insertions(+), 2 deletions(-) diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c index 0337392a3121..3c61bb98c10e 100644 --- a/arch/x86/xen/enlighten.c +++ b/arch/x86/xen/enlighten.c @@ -33,9 +33,12 @@ EXPORT_SYMBOL_GPL(hypercall_page); * and xen_vcpu_setup for details. By default it points to share_info->vcpu_info * but during boot it is switched to point to xen_vcpu_info. * The pointer is used in xen_evtchn_do_upcall to acknowledge pending events. + * Make sure that xen_vcpu_info doesn't cross a page boundary by making it + * cache-line aligned (the struct is guaranteed to have a size of 64 bytes, + * which matches the cache line size of 64-bit x86 processors). */ DEFINE_PER_CPU(struct vcpu_info *, xen_vcpu); -DEFINE_PER_CPU(struct vcpu_info, xen_vcpu_info); +DEFINE_PER_CPU_ALIGNED(struct vcpu_info, xen_vcpu_info); /* Linux <-> Xen vCPU id mapping */ DEFINE_PER_CPU(uint32_t, xen_vcpu_id); @@ -160,6 +163,7 @@ void xen_vcpu_setup(int cpu) int err; struct vcpu_info *vcpup; + BUILD_BUG_ON(sizeof(*vcpup) > SMP_CACHE_BYTES); BUG_ON(HYPERVISOR_shared_info == &xen_dummy_shared_info); /* diff --git a/arch/x86/xen/xen-ops.h b/arch/x86/xen/xen-ops.h index 408a2aa66c69..a87ab36889e7 100644 --- a/arch/x86/xen/xen-ops.h +++ b/arch/x86/xen/xen-ops.h @@ -21,7 +21,7 @@ extern void *xen_initial_gdt; struct trap_info; void xen_copy_trap_info(struct trap_info *traps); -DECLARE_PER_CPU(struct vcpu_info, xen_vcpu_info); +DECLARE_PER_CPU_ALIGNED(struct vcpu_info, xen_vcpu_info); DECLARE_PER_CPU(unsigned long, xen_cr3); DECLARE_PER_CPU(unsigned long, xen_current_cr3); -- cgit v1.2.3 From 7f3da4b698bcc21a6df0e7f114af71d53a3e26ac Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Tue, 28 Nov 2023 09:52:41 +0300 Subject: xen/events: fix error code in xen_bind_pirq_msi_to_irq() Return -ENOMEM if xen_irq_init() fails. currently the code returns an uninitialized variable or zero. Fixes: 5dd9ad32d775 ("xen/events: drop xen_allocate_irqs_dynamic()") Signed-off-by: Dan Carpenter Reviewed-by: Juergen Gross Link: https://lore.kernel.org/r/3b9ab040-a92e-4e35-b687-3a95890a9ace@moroto.mountain Signed-off-by: Juergen Gross --- drivers/xen/events/events_base.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/xen/events/events_base.c b/drivers/xen/events/events_base.c index f5edb9e27e3c..b8cfea7812d6 100644 --- a/drivers/xen/events/events_base.c +++ b/drivers/xen/events/events_base.c @@ -1110,8 +1110,10 @@ int xen_bind_pirq_msi_to_irq(struct pci_dev *dev, struct msi_desc *msidesc, for (i = 0; i < nvec; i++) { info = xen_irq_init(irq + i); - if (!info) + if (!info) { + ret = -ENOMEM; goto error_irq; + } irq_set_chip_and_handler_name(irq + i, &xen_pirq_chip, handle_edge_irq, name); -- cgit v1.2.3 From 01b1e3ca0e5ce47bbae8217d47376ad01b331b07 Mon Sep 17 00:00:00 2001 From: Michael Roth Date: Fri, 3 Nov 2023 10:13:54 -0500 Subject: efi/unaccepted: Fix off-by-one when checking for overlapping ranges When a task needs to accept memory it will scan the accepting_list to see if any ranges already being processed by other tasks overlap with its range. Due to an off-by-one in the range comparisons, a task might falsely determine that an overlapping range is being accepted, leading to an unnecessary delay before it begins processing the range. Fix the off-by-one in the range comparison to prevent this and slightly improve performance. Fixes: 50e782a86c98 ("efi/unaccepted: Fix soft lockups caused by parallel memory acceptance") Link: https://lore.kernel.org/linux-mm/20231101004523.vseyi5bezgfaht5i@amd.com/T/#me2eceb9906fcae5fe958b3fe88e41f920f8335b6 Reviewed-by: Kirill A. Shutemov Signed-off-by: Michael Roth Acked-by: Vlastimil Babka Signed-off-by: Ard Biesheuvel --- drivers/firmware/efi/unaccepted_memory.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/firmware/efi/unaccepted_memory.c b/drivers/firmware/efi/unaccepted_memory.c index 3f2f7bf6e335..5b439d04079c 100644 --- a/drivers/firmware/efi/unaccepted_memory.c +++ b/drivers/firmware/efi/unaccepted_memory.c @@ -101,7 +101,7 @@ retry: * overlap on physical address level. */ list_for_each_entry(entry, &accepting_list, list) { - if (entry->end < range.start) + if (entry->end <= range.start) continue; if (entry->start >= range.end) continue; -- cgit v1.2.3 From 59d395ed606d8df14615712b0cdcdadb2d962175 Mon Sep 17 00:00:00 2001 From: Heiner Kallweit Date: Sun, 26 Nov 2023 19:36:46 +0100 Subject: r8169: fix deadlock on RTL8125 in jumbo mtu mode The original change results in a deadlock if jumbo mtu mode is used. Reason is that the phydev lock is held when rtl_reset_work() is called here, and rtl_jumbo_config() calls phy_start_aneg() which also tries to acquire the phydev lock. Fix this by calling rtl_reset_work() asynchronously. Fixes: 621735f59064 ("r8169: fix rare issue with broken rx after link-down on RTL8125") Reported-by: Ian Chen Tested-by: Ian Chen Cc: stable@vger.kernel.org Signed-off-by: Heiner Kallweit Link: https://lore.kernel.org/r/caf6a487-ef8c-4570-88f9-f47a659faf33@gmail.com Signed-off-by: Paolo Abeni --- drivers/net/ethernet/realtek/r8169_main.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/realtek/r8169_main.c b/drivers/net/ethernet/realtek/r8169_main.c index 295366a85c63..a43e33e4b25e 100644 --- a/drivers/net/ethernet/realtek/r8169_main.c +++ b/drivers/net/ethernet/realtek/r8169_main.c @@ -579,6 +579,7 @@ struct rtl8169_tc_offsets { enum rtl_flag { RTL_FLAG_TASK_ENABLED = 0, RTL_FLAG_TASK_RESET_PENDING, + RTL_FLAG_TASK_RESET_NO_QUEUE_WAKE, RTL_FLAG_TASK_TX_TIMEOUT, RTL_FLAG_MAX }; @@ -4582,6 +4583,8 @@ static void rtl_task(struct work_struct *work) reset: rtl_reset_work(tp); netif_wake_queue(tp->dev); + } else if (test_and_clear_bit(RTL_FLAG_TASK_RESET_NO_QUEUE_WAKE, tp->wk.flags)) { + rtl_reset_work(tp); } out_unlock: rtnl_unlock(); @@ -4615,7 +4618,7 @@ static void r8169_phylink_handler(struct net_device *ndev) } else { /* In few cases rx is broken after link-down otherwise */ if (rtl_is_8125(tp)) - rtl_reset_work(tp); + rtl_schedule_task(tp, RTL_FLAG_TASK_RESET_NO_QUEUE_WAKE); pm_runtime_idle(d); } -- cgit v1.2.3 From 91d3d149978ba7b238198dd80e4b823756aa7cfa Mon Sep 17 00:00:00 2001 From: Heiner Kallweit Date: Sun, 26 Nov 2023 23:01:02 +0100 Subject: r8169: prevent potential deadlock in rtl8169_close ndo_stop() is RTNL-protected by net core, and the worker function takes RTNL as well. Therefore we will deadlock when trying to execute a pending work synchronously. To fix this execute any pending work asynchronously. This will do no harm because netif_running() is false in ndo_stop(), and therefore the work function is effectively a no-op. However we have to ensure that no task is running or pending after rtl_remove_one(), therefore add a call to cancel_work_sync(). Fixes: abe5fc42f9ce ("r8169: use RTNL to protect critical sections") Signed-off-by: Heiner Kallweit Link: https://lore.kernel.org/r/12395867-1d17-4cac-aa7d-c691938fcddf@gmail.com Signed-off-by: Paolo Abeni --- drivers/net/ethernet/realtek/r8169_main.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/realtek/r8169_main.c b/drivers/net/ethernet/realtek/r8169_main.c index a43e33e4b25e..62cabeeb842a 100644 --- a/drivers/net/ethernet/realtek/r8169_main.c +++ b/drivers/net/ethernet/realtek/r8169_main.c @@ -4694,7 +4694,7 @@ static int rtl8169_close(struct net_device *dev) rtl8169_down(tp); rtl8169_rx_clear(tp); - cancel_work_sync(&tp->wk.work); + cancel_work(&tp->wk.work); free_irq(tp->irq, tp); @@ -4928,6 +4928,8 @@ static void rtl_remove_one(struct pci_dev *pdev) if (pci_dev_run_wake(pdev)) pm_runtime_get_noresume(&pdev->dev); + cancel_work_sync(&tp->wk.work); + unregister_netdev(tp->dev); if (tp->dash_type != RTL_DASH_NONE) -- cgit v1.2.3 From 5e1d824f9a283cbf90f25241b66d1f69adb3835b Mon Sep 17 00:00:00 2001 From: Timothy Pearson Date: Sun, 19 Nov 2023 09:18:02 -0600 Subject: powerpc: Don't clobber f0/vs0 during fp|altivec register save During floating point and vector save to thread data f0/vs0 are clobbered by the FPSCR/VSCR store routine. This has been obvserved to lead to userspace register corruption and application data corruption with io-uring. Fix it by restoring f0/vs0 after FPSCR/VSCR store has completed for all the FP, altivec, VMX register save paths. Tested under QEMU in kvm mode, running on a Talos II workstation with dual POWER9 DD2.2 CPUs. Additional detail (mpe): Typically save_fpu() is called from __giveup_fpu() which saves the FP regs and also *turns off FP* in the tasks MSR, meaning the kernel will reload the FP regs from the thread struct before letting the task use FP again. So in that case save_fpu() is free to clobber f0 because the FP regs no longer hold live values for the task. There is another case though, which is the path via: sys_clone() ... copy_process() dup_task_struct() arch_dup_task_struct() flush_all_to_thread() save_all() That path saves the FP regs but leaves them live. That's meant as an optimisation for a process that's using FP/VSX and then calls fork(), leaving the regs live means the parent process doesn't have to take a fault after the fork to get its FP regs back. The optimisation was added in commit 8792468da5e1 ("powerpc: Add the ability to save FPU without giving it up"). That path does clobber f0, but f0 is volatile across function calls, and typically programs reach copy_process() from userspace via a syscall wrapper function. So in normal usage f0 being clobbered across a syscall doesn't cause visible data corruption. But there is now a new path, because io-uring can call copy_process() via create_io_thread() from the signal handling path. That's OK if the signal is handled as part of syscall return, but it's not OK if the signal is handled due to some other interrupt. That path is: interrupt_return_srr_user() interrupt_exit_user_prepare() interrupt_exit_user_prepare_main() do_notify_resume() get_signal() task_work_run() create_worker_cb() create_io_worker() copy_process() dup_task_struct() arch_dup_task_struct() flush_all_to_thread() save_all() if (tsk->thread.regs->msr & MSR_FP) save_fpu() # f0 is clobbered and potentially live in userspace Note the above discussion applies equally to save_altivec(). Fixes: 8792468da5e1 ("powerpc: Add the ability to save FPU without giving it up") Cc: stable@vger.kernel.org # v4.6+ Closes: https://lore.kernel.org/all/480932026.45576726.1699374859845.JavaMail.zimbra@raptorengineeringinc.com/ Closes: https://lore.kernel.org/linuxppc-dev/480221078.47953493.1700206777956.JavaMail.zimbra@raptorengineeringinc.com/ Tested-by: Timothy Pearson Tested-by: Jens Axboe Signed-off-by: Timothy Pearson [mpe: Reword change log to describe exact path of corruption & other minor tweaks] Signed-off-by: Michael Ellerman Link: https://msgid.link/1921539696.48534988.1700407082933.JavaMail.zimbra@raptorengineeringinc.com --- arch/powerpc/kernel/fpu.S | 13 +++++++++++++ arch/powerpc/kernel/vector.S | 2 ++ 2 files changed, 15 insertions(+) diff --git a/arch/powerpc/kernel/fpu.S b/arch/powerpc/kernel/fpu.S index 6a9acfb690c9..2f8f3f93cbb6 100644 --- a/arch/powerpc/kernel/fpu.S +++ b/arch/powerpc/kernel/fpu.S @@ -23,6 +23,15 @@ #include #ifdef CONFIG_VSX +#define __REST_1FPVSR(n,c,base) \ +BEGIN_FTR_SECTION \ + b 2f; \ +END_FTR_SECTION_IFSET(CPU_FTR_VSX); \ + REST_FPR(n,base); \ + b 3f; \ +2: REST_VSR(n,c,base); \ +3: + #define __REST_32FPVSRS(n,c,base) \ BEGIN_FTR_SECTION \ b 2f; \ @@ -41,9 +50,11 @@ END_FTR_SECTION_IFSET(CPU_FTR_VSX); \ 2: SAVE_32VSRS(n,c,base); \ 3: #else +#define __REST_1FPVSR(n,b,base) REST_FPR(n, base) #define __REST_32FPVSRS(n,b,base) REST_32FPRS(n, base) #define __SAVE_32FPVSRS(n,b,base) SAVE_32FPRS(n, base) #endif +#define REST_1FPVSR(n,c,base) __REST_1FPVSR(n,__REG_##c,__REG_##base) #define REST_32FPVSRS(n,c,base) __REST_32FPVSRS(n,__REG_##c,__REG_##base) #define SAVE_32FPVSRS(n,c,base) __SAVE_32FPVSRS(n,__REG_##c,__REG_##base) @@ -67,6 +78,7 @@ _GLOBAL(store_fp_state) SAVE_32FPVSRS(0, R4, R3) mffs fr0 stfd fr0,FPSTATE_FPSCR(r3) + REST_1FPVSR(0, R4, R3) blr EXPORT_SYMBOL(store_fp_state) @@ -138,4 +150,5 @@ _GLOBAL(save_fpu) 2: SAVE_32FPVSRS(0, R4, R6) mffs fr0 stfd fr0,FPSTATE_FPSCR(r6) + REST_1FPVSR(0, R4, R6) blr diff --git a/arch/powerpc/kernel/vector.S b/arch/powerpc/kernel/vector.S index 4094e4c4c77a..80b3f6e476b6 100644 --- a/arch/powerpc/kernel/vector.S +++ b/arch/powerpc/kernel/vector.S @@ -33,6 +33,7 @@ _GLOBAL(store_vr_state) mfvscr v0 li r4, VRSTATE_VSCR stvx v0, r4, r3 + lvx v0, 0, r3 blr EXPORT_SYMBOL(store_vr_state) @@ -109,6 +110,7 @@ _GLOBAL(save_altivec) mfvscr v0 li r4,VRSTATE_VSCR stvx v0,r4,r7 + lvx v0,0,r7 blr #ifdef CONFIG_VSX -- cgit v1.2.3 From e0894ff038d86f30614ec16ec26dacb88c8d2bd4 Mon Sep 17 00:00:00 2001 From: "Luke D. Jones" Date: Mon, 27 Nov 2023 12:05:21 +1300 Subject: platform/x86: asus-wmi: disable USB0 hub on ROG Ally before suspend MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit ASUS have worked around an issue in XInput where it doesn't support USB selective suspend, which causes suspend issues in Windows. They worked around this by adjusting the MCU firmware to disable the USB0 hub when the screen is switched off during the Microsoft DSM suspend path in ACPI. The issue we have with this however is one of timing - the call the tells the MCU to this isn't able to complete before suspend is done so we call this in a prepare() and add a small msleep() to ensure it is done. This must be done before the screen is switched off to prevent a variety of possible races. Further to this the MCU powersave option must also be disabled as it can cause a number of issues such as: - unreliable resume connection of N-Key - complete loss of N-Key if the power is plugged in while suspended Disabling the powersave option prevents this. Without this the MCU is unable to initialise itself correctly on resume. Signed-off-by: "Luke D. Jones" Tested-by: Philip Mueller Reviewed-by: Hans de Goede Link: https://lore.kernel.org/r/20231126230521.125708-2-luke@ljones.dev Signed-off-by: Ilpo Järvinen --- drivers/platform/x86/asus-wmi.c | 50 ++++++++++++++++++++++++++++++ include/linux/platform_data/x86/asus-wmi.h | 3 ++ 2 files changed, 53 insertions(+) diff --git a/drivers/platform/x86/asus-wmi.c b/drivers/platform/x86/asus-wmi.c index ca668cf04020..9f7e23c5c6b4 100644 --- a/drivers/platform/x86/asus-wmi.c +++ b/drivers/platform/x86/asus-wmi.c @@ -16,6 +16,7 @@ #include #include #include +#include #include #include #include @@ -132,6 +133,11 @@ module_param(fnlock_default, bool, 0444); #define ASUS_SCREENPAD_BRIGHT_MAX 255 #define ASUS_SCREENPAD_BRIGHT_DEFAULT 60 +/* Controls the power state of the USB0 hub on ROG Ally which input is on */ +#define ASUS_USB0_PWR_EC0_CSEE "\\_SB.PCI0.SBRG.EC0.CSEE" +/* 300ms so far seems to produce a reliable result on AC and battery */ +#define ASUS_USB0_PWR_EC0_CSEE_WAIT 300 + static const char * const ashs_ids[] = { "ATK4001", "ATK4002", NULL }; static int throttle_thermal_policy_write(struct asus_wmi *); @@ -300,6 +306,9 @@ struct asus_wmi { bool fnlock_locked; + /* The ROG Ally device requires the MCU USB device be disconnected before suspend */ + bool ally_mcu_usb_switch; + struct asus_wmi_debug debug; struct asus_wmi_driver *driver; @@ -4488,6 +4497,8 @@ static int asus_wmi_add(struct platform_device *pdev) asus->nv_temp_tgt_available = asus_wmi_dev_is_present(asus, ASUS_WMI_DEVID_NV_THERM_TARGET); asus->panel_overdrive_available = asus_wmi_dev_is_present(asus, ASUS_WMI_DEVID_PANEL_OD); asus->mini_led_mode_available = asus_wmi_dev_is_present(asus, ASUS_WMI_DEVID_MINI_LED_MODE); + asus->ally_mcu_usb_switch = acpi_has_method(NULL, ASUS_USB0_PWR_EC0_CSEE) + && dmi_match(DMI_BOARD_NAME, "RC71L"); err = fan_boost_mode_check_present(asus); if (err) @@ -4662,6 +4673,43 @@ static int asus_hotk_resume(struct device *device) asus_wmi_fnlock_update(asus); asus_wmi_tablet_mode_get_state(asus); + + return 0; +} + +static int asus_hotk_resume_early(struct device *device) +{ + struct asus_wmi *asus = dev_get_drvdata(device); + + if (asus->ally_mcu_usb_switch) { + if (ACPI_FAILURE(acpi_execute_simple_method(NULL, ASUS_USB0_PWR_EC0_CSEE, 0xB8))) + dev_err(device, "ROG Ally MCU failed to connect USB dev\n"); + else + msleep(ASUS_USB0_PWR_EC0_CSEE_WAIT); + } + return 0; +} + +static int asus_hotk_prepare(struct device *device) +{ + struct asus_wmi *asus = dev_get_drvdata(device); + int result, err; + + if (asus->ally_mcu_usb_switch) { + /* When powersave is enabled it causes many issues with resume of USB hub */ + result = asus_wmi_get_devstate_simple(asus, ASUS_WMI_DEVID_MCU_POWERSAVE); + if (result == 1) { + dev_warn(device, "MCU powersave enabled, disabling to prevent resume issues"); + err = asus_wmi_set_devstate(ASUS_WMI_DEVID_MCU_POWERSAVE, 0, &result); + if (err || result != 1) + dev_err(device, "Failed to set MCU powersave mode: %d\n", err); + } + /* sleep required to ensure USB0 is disabled before sleep continues */ + if (ACPI_FAILURE(acpi_execute_simple_method(NULL, ASUS_USB0_PWR_EC0_CSEE, 0xB7))) + dev_err(device, "ROG Ally MCU failed to disconnect USB dev\n"); + else + msleep(ASUS_USB0_PWR_EC0_CSEE_WAIT); + } return 0; } @@ -4709,6 +4757,8 @@ static const struct dev_pm_ops asus_pm_ops = { .thaw = asus_hotk_thaw, .restore = asus_hotk_restore, .resume = asus_hotk_resume, + .resume_early = asus_hotk_resume_early, + .prepare = asus_hotk_prepare, }; /* Registration ***************************************************************/ diff --git a/include/linux/platform_data/x86/asus-wmi.h b/include/linux/platform_data/x86/asus-wmi.h index 63e630276499..ab1c7deff118 100644 --- a/include/linux/platform_data/x86/asus-wmi.h +++ b/include/linux/platform_data/x86/asus-wmi.h @@ -114,6 +114,9 @@ /* Charging mode - 1=Barrel, 2=USB */ #define ASUS_WMI_DEVID_CHARGE_MODE 0x0012006C +/* MCU powersave mode */ +#define ASUS_WMI_DEVID_MCU_POWERSAVE 0x001200E2 + /* epu is connected? 1 == true */ #define ASUS_WMI_DEVID_EGPU_CONNECTED 0x00090018 /* egpu on/off */ -- cgit v1.2.3 From bb87be267b8ee9b40917fb5bf51be5ddb33c37c2 Mon Sep 17 00:00:00 2001 From: "Gautham R. Shenoy" Date: Mon, 27 Nov 2023 16:41:21 +0530 Subject: cpufreq/amd-pstate: Fix the return value of amd_pstate_fast_switch() cpufreq_driver->fast_switch() callback expects a frequency as a return value. amd_pstate_fast_switch() was returning the return value of amd_pstate_update_freq(), which only indicates a success or failure. Fix this by making amd_pstate_fast_switch() return the target_freq when the call to amd_pstate_update_freq() is successful, and return the current frequency from policy->cur when the call to amd_pstate_update_freq() is unsuccessful. Fixes: 4badf2eb1e98 ("cpufreq: amd-pstate: Add ->fast_switch() callback") Acked-by: Huang Rui Reviewed-by: Wyes Karny Reviewed-by: Perry Yuan Cc: 6.4+ # v6.4+ Signed-off-by: Gautham R. Shenoy Signed-off-by: Rafael J. Wysocki --- drivers/cpufreq/amd-pstate.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/cpufreq/amd-pstate.c b/drivers/cpufreq/amd-pstate.c index 9a1e194d5cf8..300f81d36291 100644 --- a/drivers/cpufreq/amd-pstate.c +++ b/drivers/cpufreq/amd-pstate.c @@ -518,7 +518,9 @@ static int amd_pstate_target(struct cpufreq_policy *policy, static unsigned int amd_pstate_fast_switch(struct cpufreq_policy *policy, unsigned int target_freq) { - return amd_pstate_update_freq(policy, target_freq, true); + if (!amd_pstate_update_freq(policy, target_freq, true)) + return target_freq; + return policy->cur; } static void amd_pstate_adjust_perf(unsigned int cpu, -- cgit v1.2.3 From b817f1488fca548fe50e2654d84a1956a16a1a8a Mon Sep 17 00:00:00 2001 From: Lukasz Luba Date: Mon, 27 Nov 2023 09:28:19 +0000 Subject: powercap: DTPM: Fix unneeded conversions to micro-Watts The power values coming from the Energy Model are already in uW. The PowerCap and DTPM frameworks operate on uW, so all places should just use the values from the EM. Fix the code by removing all of the conversion to uW still present in it. Fixes: ae6ccaa65038 (PM: EM: convert power field to micro-Watts precision and align drivers) Cc: 5.19+ # v5.19+ Signed-off-by: Lukasz Luba [ rjw: Changelog edits ] Signed-off-by: Rafael J. Wysocki --- drivers/powercap/dtpm_cpu.c | 6 +----- drivers/powercap/dtpm_devfreq.c | 11 +++-------- 2 files changed, 4 insertions(+), 13 deletions(-) diff --git a/drivers/powercap/dtpm_cpu.c b/drivers/powercap/dtpm_cpu.c index 2ff7717530bf..8a2f18fa3faf 100644 --- a/drivers/powercap/dtpm_cpu.c +++ b/drivers/powercap/dtpm_cpu.c @@ -24,7 +24,6 @@ #include #include #include -#include struct dtpm_cpu { struct dtpm dtpm; @@ -104,8 +103,7 @@ static u64 get_pd_power_uw(struct dtpm *dtpm) if (pd->table[i].frequency < freq) continue; - return scale_pd_power_uw(pd_mask, pd->table[i].power * - MICROWATT_PER_MILLIWATT); + return scale_pd_power_uw(pd_mask, pd->table[i].power); } return 0; @@ -122,11 +120,9 @@ static int update_pd_power_uw(struct dtpm *dtpm) nr_cpus = cpumask_weight(&cpus); dtpm->power_min = em->table[0].power; - dtpm->power_min *= MICROWATT_PER_MILLIWATT; dtpm->power_min *= nr_cpus; dtpm->power_max = em->table[em->nr_perf_states - 1].power; - dtpm->power_max *= MICROWATT_PER_MILLIWATT; dtpm->power_max *= nr_cpus; return 0; diff --git a/drivers/powercap/dtpm_devfreq.c b/drivers/powercap/dtpm_devfreq.c index 91276761a31d..612c3b59dd5b 100644 --- a/drivers/powercap/dtpm_devfreq.c +++ b/drivers/powercap/dtpm_devfreq.c @@ -39,10 +39,8 @@ static int update_pd_power_uw(struct dtpm *dtpm) struct em_perf_domain *pd = em_pd_get(dev); dtpm->power_min = pd->table[0].power; - dtpm->power_min *= MICROWATT_PER_MILLIWATT; dtpm->power_max = pd->table[pd->nr_perf_states - 1].power; - dtpm->power_max *= MICROWATT_PER_MILLIWATT; return 0; } @@ -54,13 +52,10 @@ static u64 set_pd_power_limit(struct dtpm *dtpm, u64 power_limit) struct device *dev = devfreq->dev.parent; struct em_perf_domain *pd = em_pd_get(dev); unsigned long freq; - u64 power; int i; for (i = 0; i < pd->nr_perf_states; i++) { - - power = pd->table[i].power * MICROWATT_PER_MILLIWATT; - if (power > power_limit) + if (pd->table[i].power > power_limit) break; } @@ -68,7 +63,7 @@ static u64 set_pd_power_limit(struct dtpm *dtpm, u64 power_limit) dev_pm_qos_update_request(&dtpm_devfreq->qos_req, freq); - power_limit = pd->table[i - 1].power * MICROWATT_PER_MILLIWATT; + power_limit = pd->table[i - 1].power; return power_limit; } @@ -110,7 +105,7 @@ static u64 get_pd_power_uw(struct dtpm *dtpm) if (pd->table[i].frequency < freq) continue; - power = pd->table[i].power * MICROWATT_PER_MILLIWATT; + power = pd->table[i].power; power *= status.busy_time; power >>= 10; -- cgit v1.2.3 From c392cbecd8eca4c53f2bf508731257d9d0a21c2d Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Mon, 27 Nov 2023 16:47:04 -0700 Subject: io_uring/kbuf: defer release of mapped buffer rings If a provided buffer ring is setup with IOU_PBUF_RING_MMAP, then the kernel allocates the memory for it and the application is expected to mmap(2) this memory. However, io_uring uses remap_pfn_range() for this operation, so we cannot rely on normal munmap/release on freeing them for us. Stash an io_buf_free entry away for each of these, if any, and provide a helper to free them post ->release(). Cc: stable@vger.kernel.org Fixes: c56e022c0a27 ("io_uring: add support for user mapped provided buffer ring") Reported-by: Jann Horn Signed-off-by: Jens Axboe --- include/linux/io_uring_types.h | 3 +++ io_uring/io_uring.c | 2 ++ io_uring/kbuf.c | 44 +++++++++++++++++++++++++++++++++++++----- io_uring/kbuf.h | 2 ++ 4 files changed, 46 insertions(+), 5 deletions(-) diff --git a/include/linux/io_uring_types.h b/include/linux/io_uring_types.h index d3009d56af0b..805bb635cdf5 100644 --- a/include/linux/io_uring_types.h +++ b/include/linux/io_uring_types.h @@ -340,6 +340,9 @@ struct io_ring_ctx { struct list_head io_buffers_cache; + /* deferred free list, protected by ->uring_lock */ + struct hlist_head io_buf_list; + /* Keep this last, we don't need it for the fast path */ struct wait_queue_head poll_wq; struct io_restriction restrictions; diff --git a/io_uring/io_uring.c b/io_uring/io_uring.c index e40b11438210..3a216f0744dd 100644 --- a/io_uring/io_uring.c +++ b/io_uring/io_uring.c @@ -325,6 +325,7 @@ static __cold struct io_ring_ctx *io_ring_ctx_alloc(struct io_uring_params *p) INIT_LIST_HEAD(&ctx->sqd_list); INIT_LIST_HEAD(&ctx->cq_overflow_list); INIT_LIST_HEAD(&ctx->io_buffers_cache); + INIT_HLIST_HEAD(&ctx->io_buf_list); io_alloc_cache_init(&ctx->rsrc_node_cache, IO_NODE_ALLOC_CACHE_MAX, sizeof(struct io_rsrc_node)); io_alloc_cache_init(&ctx->apoll_cache, IO_ALLOC_CACHE_MAX, @@ -2950,6 +2951,7 @@ static __cold void io_ring_ctx_free(struct io_ring_ctx *ctx) ctx->mm_account = NULL; } io_rings_free(ctx); + io_kbuf_mmap_list_free(ctx); percpu_ref_exit(&ctx->refs); free_uid(ctx->user); diff --git a/io_uring/kbuf.c b/io_uring/kbuf.c index a1e4239c7d75..85e680fc74ce 100644 --- a/io_uring/kbuf.c +++ b/io_uring/kbuf.c @@ -33,6 +33,11 @@ struct io_provide_buf { __u16 bid; }; +struct io_buf_free { + struct hlist_node list; + void *mem; +}; + static inline struct io_buffer_list *io_buffer_get_list(struct io_ring_ctx *ctx, unsigned int bgid) { @@ -223,7 +228,10 @@ static int __io_remove_buffers(struct io_ring_ctx *ctx, if (bl->is_mapped) { i = bl->buf_ring->tail - bl->head; if (bl->is_mmap) { - folio_put(virt_to_folio(bl->buf_ring)); + /* + * io_kbuf_list_free() will free the page(s) at + * ->release() time. + */ bl->buf_ring = NULL; bl->is_mmap = 0; } else if (bl->buf_nr_pages) { @@ -531,18 +539,28 @@ error_unpin: return -EINVAL; } -static int io_alloc_pbuf_ring(struct io_uring_buf_reg *reg, +static int io_alloc_pbuf_ring(struct io_ring_ctx *ctx, + struct io_uring_buf_reg *reg, struct io_buffer_list *bl) { - gfp_t gfp = GFP_KERNEL_ACCOUNT | __GFP_ZERO | __GFP_NOWARN | __GFP_COMP; + struct io_buf_free *ibf; size_t ring_size; void *ptr; ring_size = reg->ring_entries * sizeof(struct io_uring_buf_ring); - ptr = (void *) __get_free_pages(gfp, get_order(ring_size)); + ptr = io_mem_alloc(ring_size); if (!ptr) return -ENOMEM; + /* Allocate and store deferred free entry */ + ibf = kmalloc(sizeof(*ibf), GFP_KERNEL_ACCOUNT); + if (!ibf) { + io_mem_free(ptr); + return -ENOMEM; + } + ibf->mem = ptr; + hlist_add_head(&ibf->list, &ctx->io_buf_list); + bl->buf_ring = ptr; bl->is_mapped = 1; bl->is_mmap = 1; @@ -599,7 +617,7 @@ int io_register_pbuf_ring(struct io_ring_ctx *ctx, void __user *arg) if (!(reg.flags & IOU_PBUF_RING_MMAP)) ret = io_pin_pbuf_ring(®, bl); else - ret = io_alloc_pbuf_ring(®, bl); + ret = io_alloc_pbuf_ring(ctx, ®, bl); if (!ret) { bl->nr_entries = reg.ring_entries; @@ -649,3 +667,19 @@ void *io_pbuf_get_address(struct io_ring_ctx *ctx, unsigned long bgid) return bl->buf_ring; } + +/* + * Called at or after ->release(), free the mmap'ed buffers that we used + * for memory mapped provided buffer rings. + */ +void io_kbuf_mmap_list_free(struct io_ring_ctx *ctx) +{ + struct io_buf_free *ibf; + struct hlist_node *tmp; + + hlist_for_each_entry_safe(ibf, tmp, &ctx->io_buf_list, list) { + hlist_del(&ibf->list); + io_mem_free(ibf->mem); + kfree(ibf); + } +} diff --git a/io_uring/kbuf.h b/io_uring/kbuf.h index f2d615236b2c..6c7646e6057c 100644 --- a/io_uring/kbuf.h +++ b/io_uring/kbuf.h @@ -51,6 +51,8 @@ int io_provide_buffers(struct io_kiocb *req, unsigned int issue_flags); int io_register_pbuf_ring(struct io_ring_ctx *ctx, void __user *arg); int io_unregister_pbuf_ring(struct io_ring_ctx *ctx, void __user *arg); +void io_kbuf_mmap_list_free(struct io_ring_ctx *ctx); + unsigned int __io_put_kbuf(struct io_kiocb *req, unsigned issue_flags); bool io_kbuf_recycle_legacy(struct io_kiocb *req, unsigned issue_flags); -- cgit v1.2.3 From cff5f49d433fcd0063c8be7dd08fa5bf190c6c37 Mon Sep 17 00:00:00 2001 From: Tim Van Patten Date: Wed, 15 Nov 2023 09:20:43 -0700 Subject: cgroup_freezer: cgroup_freezing: Check if not frozen __thaw_task() was recently updated to warn if the task being thawed was part of a freezer cgroup that is still currently freezing: void __thaw_task(struct task_struct *p) { ... if (WARN_ON_ONCE(freezing(p))) goto unlock; This has exposed a bug in cgroup1 freezing where when CGROUP_FROZEN is asserted, the CGROUP_FREEZING bits are not also cleared at the same time. Meaning, when a cgroup is marked FROZEN it continues to be marked FREEZING as well. This causes the WARNING to trigger, because cgroup_freezing() thinks the cgroup is still freezing. There are two ways to fix this: 1. Whenever FROZEN is set, clear FREEZING for the cgroup and all children cgroups. 2. Update cgroup_freezing() to also verify that FROZEN is not set. This patch implements option (2), since it's smaller and more straightforward. Signed-off-by: Tim Van Patten Tested-by: Mark Hasemeyer Fixes: f5d39b020809 ("freezer,sched: Rewrite core freezer logic") Cc: stable@vger.kernel.org # v6.1+ Signed-off-by: Tejun Heo --- kernel/cgroup/legacy_freezer.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/kernel/cgroup/legacy_freezer.c b/kernel/cgroup/legacy_freezer.c index 122dacb3a443..66d1708042a7 100644 --- a/kernel/cgroup/legacy_freezer.c +++ b/kernel/cgroup/legacy_freezer.c @@ -66,9 +66,15 @@ static struct freezer *parent_freezer(struct freezer *freezer) bool cgroup_freezing(struct task_struct *task) { bool ret; + unsigned int state; rcu_read_lock(); - ret = task_freezer(task)->state & CGROUP_FREEZING; + /* Check if the cgroup is still FREEZING, but not FROZEN. The extra + * !FROZEN check is required, because the FREEZING bit is not cleared + * when the state FROZEN is reached. + */ + state = task_freezer(task)->state; + ret = (state & CGROUP_FREEZING) && !(state & CGROUP_FROZEN); rcu_read_unlock(); return ret; -- cgit v1.2.3 From b10b73c102a2eab91e1cd62a03d6446f1dfecc64 Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Tue, 28 Nov 2023 11:17:25 -0700 Subject: io_uring/kbuf: recycle freed mapped buffer ring entries Right now we stash any potentially mmap'ed provided ring buffer range for freeing at release time, regardless of when they get unregistered. Since we're keeping track of these ranges anyway, keep track of their registration state as well, and use that to recycle ranges when appropriate rather than always allocate new ones. The lookup is a basic scan of entries, checking for the best matching free entry. Fixes: c392cbecd8ec ("io_uring/kbuf: defer release of mapped buffer rings") Signed-off-by: Jens Axboe --- io_uring/kbuf.c | 77 ++++++++++++++++++++++++++++++++++++++++++++++++--------- 1 file changed, 66 insertions(+), 11 deletions(-) diff --git a/io_uring/kbuf.c b/io_uring/kbuf.c index 85e680fc74ce..325ca7f8b0a0 100644 --- a/io_uring/kbuf.c +++ b/io_uring/kbuf.c @@ -36,6 +36,8 @@ struct io_provide_buf { struct io_buf_free { struct hlist_node list; void *mem; + size_t size; + int inuse; }; static inline struct io_buffer_list *io_buffer_get_list(struct io_ring_ctx *ctx, @@ -216,6 +218,24 @@ static __cold int io_init_bl_list(struct io_ring_ctx *ctx) return 0; } +/* + * Mark the given mapped range as free for reuse + */ +static void io_kbuf_mark_free(struct io_ring_ctx *ctx, struct io_buffer_list *bl) +{ + struct io_buf_free *ibf; + + hlist_for_each_entry(ibf, &ctx->io_buf_list, list) { + if (bl->buf_ring == ibf->mem) { + ibf->inuse = 0; + return; + } + } + + /* can't happen... */ + WARN_ON_ONCE(1); +} + static int __io_remove_buffers(struct io_ring_ctx *ctx, struct io_buffer_list *bl, unsigned nbufs) { @@ -232,6 +252,7 @@ static int __io_remove_buffers(struct io_ring_ctx *ctx, * io_kbuf_list_free() will free the page(s) at * ->release() time. */ + io_kbuf_mark_free(ctx, bl); bl->buf_ring = NULL; bl->is_mmap = 0; } else if (bl->buf_nr_pages) { @@ -539,6 +560,34 @@ error_unpin: return -EINVAL; } +/* + * See if we have a suitable region that we can reuse, rather than allocate + * both a new io_buf_free and mem region again. We leave it on the list as + * even a reused entry will need freeing at ring release. + */ +static struct io_buf_free *io_lookup_buf_free_entry(struct io_ring_ctx *ctx, + size_t ring_size) +{ + struct io_buf_free *ibf, *best = NULL; + size_t best_dist; + + hlist_for_each_entry(ibf, &ctx->io_buf_list, list) { + size_t dist; + + if (ibf->inuse || ibf->size < ring_size) + continue; + dist = ibf->size - ring_size; + if (!best || dist < best_dist) { + best = ibf; + if (!dist) + break; + best_dist = dist; + } + } + + return best; +} + static int io_alloc_pbuf_ring(struct io_ring_ctx *ctx, struct io_uring_buf_reg *reg, struct io_buffer_list *bl) @@ -548,20 +597,26 @@ static int io_alloc_pbuf_ring(struct io_ring_ctx *ctx, void *ptr; ring_size = reg->ring_entries * sizeof(struct io_uring_buf_ring); - ptr = io_mem_alloc(ring_size); - if (!ptr) - return -ENOMEM; - /* Allocate and store deferred free entry */ - ibf = kmalloc(sizeof(*ibf), GFP_KERNEL_ACCOUNT); + /* Reuse existing entry, if we can */ + ibf = io_lookup_buf_free_entry(ctx, ring_size); if (!ibf) { - io_mem_free(ptr); - return -ENOMEM; - } - ibf->mem = ptr; - hlist_add_head(&ibf->list, &ctx->io_buf_list); + ptr = io_mem_alloc(ring_size); + if (!ptr) + return -ENOMEM; - bl->buf_ring = ptr; + /* Allocate and store deferred free entry */ + ibf = kmalloc(sizeof(*ibf), GFP_KERNEL_ACCOUNT); + if (!ibf) { + io_mem_free(ptr); + return -ENOMEM; + } + ibf->mem = ptr; + ibf->size = ring_size; + hlist_add_head(&ibf->list, &ctx->io_buf_list); + } + ibf->inuse = 1; + bl->buf_ring = ibf->mem; bl->is_mapped = 1; bl->is_mmap = 1; return 0; -- cgit v1.2.3 From 07d6063d3d3beb3168d3ac9fdef7bca81254d983 Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Mon, 27 Nov 2023 17:02:48 -0700 Subject: io_uring/kbuf: prune deferred locked cache when tearing down We used to just use our page list for final teardown, which would ensure that we got all the buffers, even the ones that were not on the normal cached list. But while moving to slab for the io_buffers, we know only prune this list, not the deferred locked list that we have. This can cause a leak of memory, if the workload ends up using the intermediate locked list. Fix this by always pruning both lists when tearing down. Fixes: b3a4dbc89d40 ("io_uring/kbuf: Use slab for struct io_buffer objects") Signed-off-by: Jens Axboe --- io_uring/kbuf.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/io_uring/kbuf.c b/io_uring/kbuf.c index 325ca7f8b0a0..39d15a27eb92 100644 --- a/io_uring/kbuf.c +++ b/io_uring/kbuf.c @@ -306,6 +306,14 @@ void io_destroy_buffers(struct io_ring_ctx *ctx) kfree(bl); } + /* + * Move deferred locked entries to cache before pruning + */ + spin_lock(&ctx->completion_lock); + if (!list_empty(&ctx->io_buffers_comp)) + list_splice_init(&ctx->io_buffers_comp, &ctx->io_buffers_cache); + spin_unlock(&ctx->completion_lock); + list_for_each_safe(item, tmp, &ctx->io_buffers_cache) { buf = list_entry(item, struct io_buffer, list); kmem_cache_free(io_buf_cachep, buf); -- cgit v1.2.3 From 5cf4f52e6d8aa2d3b7728f568abbf9d42a3af252 Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Mon, 27 Nov 2023 17:54:40 -0700 Subject: io_uring: free io_buffer_list entries via RCU mmap_lock nests under uring_lock out of necessity, as we may be doing user copies with uring_lock held. However, for mmap of provided buffer rings, we attempt to grab uring_lock with mmap_lock already held from do_mmap(). This makes lockdep, rightfully, complain: WARNING: possible circular locking dependency detected 6.7.0-rc1-00009-gff3337ebaf94-dirty #4438 Not tainted ------------------------------------------------------ buf-ring.t/442 is trying to acquire lock: ffff00020e1480a8 (&ctx->uring_lock){+.+.}-{3:3}, at: io_uring_validate_mmap_request.isra.0+0x4c/0x140 but task is already holding lock: ffff0000dc226190 (&mm->mmap_lock){++++}-{3:3}, at: vm_mmap_pgoff+0x124/0x264 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&mm->mmap_lock){++++}-{3:3}: __might_fault+0x90/0xbc io_register_pbuf_ring+0x94/0x488 __arm64_sys_io_uring_register+0x8dc/0x1318 invoke_syscall+0x5c/0x17c el0_svc_common.constprop.0+0x108/0x130 do_el0_svc+0x2c/0x38 el0_svc+0x4c/0x94 el0t_64_sync_handler+0x118/0x124 el0t_64_sync+0x168/0x16c -> #0 (&ctx->uring_lock){+.+.}-{3:3}: __lock_acquire+0x19a0/0x2d14 lock_acquire+0x2e0/0x44c __mutex_lock+0x118/0x564 mutex_lock_nested+0x20/0x28 io_uring_validate_mmap_request.isra.0+0x4c/0x140 io_uring_mmu_get_unmapped_area+0x3c/0x98 get_unmapped_area+0xa4/0x158 do_mmap+0xec/0x5b4 vm_mmap_pgoff+0x158/0x264 ksys_mmap_pgoff+0x1d4/0x254 __arm64_sys_mmap+0x80/0x9c invoke_syscall+0x5c/0x17c el0_svc_common.constprop.0+0x108/0x130 do_el0_svc+0x2c/0x38 el0_svc+0x4c/0x94 el0t_64_sync_handler+0x118/0x124 el0t_64_sync+0x168/0x16c From that mmap(2) path, we really just need to ensure that the buffer list doesn't go away from underneath us. For the lower indexed entries, they never go away until the ring is freed and we can always sanely reference those as long as the caller has a file reference. For the higher indexed ones in our xarray, we just need to ensure that the buffer list remains valid while we return the address of it. Free the higher indexed io_buffer_list entries via RCU. With that we can avoid needing ->uring_lock inside mmap(2), and simply hold the RCU read lock around the buffer list lookup and address check. To ensure that the arrayed lookup either returns a valid fully formulated entry via RCU lookup, add an 'is_ready' flag that we access with store and release memory ordering. This isn't needed for the xarray lookups, but doesn't hurt either. Since this isn't a fast path, retain it across both types. Similarly, for the allocated array inside the ctx, ensure we use the proper load/acquire as setup could in theory be running in parallel with mmap. While in there, add a few lockdep checks for documentation purposes. Cc: stable@vger.kernel.org Fixes: c56e022c0a27 ("io_uring: add support for user mapped provided buffer ring") Signed-off-by: Jens Axboe --- io_uring/io_uring.c | 4 ++-- io_uring/kbuf.c | 64 ++++++++++++++++++++++++++++++++++++++++++----------- io_uring/kbuf.h | 3 +++ 3 files changed, 56 insertions(+), 15 deletions(-) diff --git a/io_uring/io_uring.c b/io_uring/io_uring.c index 3a216f0744dd..05f933dddfde 100644 --- a/io_uring/io_uring.c +++ b/io_uring/io_uring.c @@ -3498,9 +3498,9 @@ static void *io_uring_validate_mmap_request(struct file *file, unsigned int bgid; bgid = (offset & ~IORING_OFF_MMAP_MASK) >> IORING_OFF_PBUF_SHIFT; - mutex_lock(&ctx->uring_lock); + rcu_read_lock(); ptr = io_pbuf_get_address(ctx, bgid); - mutex_unlock(&ctx->uring_lock); + rcu_read_unlock(); if (!ptr) return ERR_PTR(-EINVAL); break; diff --git a/io_uring/kbuf.c b/io_uring/kbuf.c index 39d15a27eb92..268788305b61 100644 --- a/io_uring/kbuf.c +++ b/io_uring/kbuf.c @@ -40,19 +40,35 @@ struct io_buf_free { int inuse; }; +static struct io_buffer_list *__io_buffer_get_list(struct io_ring_ctx *ctx, + struct io_buffer_list *bl, + unsigned int bgid) +{ + if (bl && bgid < BGID_ARRAY) + return &bl[bgid]; + + return xa_load(&ctx->io_bl_xa, bgid); +} + static inline struct io_buffer_list *io_buffer_get_list(struct io_ring_ctx *ctx, unsigned int bgid) { - if (ctx->io_bl && bgid < BGID_ARRAY) - return &ctx->io_bl[bgid]; + lockdep_assert_held(&ctx->uring_lock); - return xa_load(&ctx->io_bl_xa, bgid); + return __io_buffer_get_list(ctx, ctx->io_bl, bgid); } static int io_buffer_add_list(struct io_ring_ctx *ctx, struct io_buffer_list *bl, unsigned int bgid) { + /* + * Store buffer group ID and finally mark the list as visible. + * The normal lookup doesn't care about the visibility as we're + * always under the ->uring_lock, but the RCU lookup from mmap does. + */ bl->bgid = bgid; + smp_store_release(&bl->is_ready, 1); + if (bgid < BGID_ARRAY) return 0; @@ -203,18 +219,19 @@ void __user *io_buffer_select(struct io_kiocb *req, size_t *len, static __cold int io_init_bl_list(struct io_ring_ctx *ctx) { + struct io_buffer_list *bl; int i; - ctx->io_bl = kcalloc(BGID_ARRAY, sizeof(struct io_buffer_list), - GFP_KERNEL); - if (!ctx->io_bl) + bl = kcalloc(BGID_ARRAY, sizeof(struct io_buffer_list), GFP_KERNEL); + if (!bl) return -ENOMEM; for (i = 0; i < BGID_ARRAY; i++) { - INIT_LIST_HEAD(&ctx->io_bl[i].buf_list); - ctx->io_bl[i].bgid = i; + INIT_LIST_HEAD(&bl[i].buf_list); + bl[i].bgid = i; } + smp_store_release(&ctx->io_bl, bl); return 0; } @@ -303,7 +320,7 @@ void io_destroy_buffers(struct io_ring_ctx *ctx) xa_for_each(&ctx->io_bl_xa, index, bl) { xa_erase(&ctx->io_bl_xa, bl->bgid); __io_remove_buffers(ctx, bl, -1U); - kfree(bl); + kfree_rcu(bl, rcu); } /* @@ -497,7 +514,16 @@ int io_provide_buffers(struct io_kiocb *req, unsigned int issue_flags) INIT_LIST_HEAD(&bl->buf_list); ret = io_buffer_add_list(ctx, bl, p->bgid); if (ret) { - kfree(bl); + /* + * Doesn't need rcu free as it was never visible, but + * let's keep it consistent throughout. Also can't + * be a lower indexed array group, as adding one + * where lookup failed cannot happen. + */ + if (p->bgid >= BGID_ARRAY) + kfree_rcu(bl, rcu); + else + WARN_ON_ONCE(1); goto err; } } @@ -636,6 +662,8 @@ int io_register_pbuf_ring(struct io_ring_ctx *ctx, void __user *arg) struct io_buffer_list *bl, *free_bl = NULL; int ret; + lockdep_assert_held(&ctx->uring_lock); + if (copy_from_user(®, arg, sizeof(reg))) return -EFAULT; @@ -690,7 +718,7 @@ int io_register_pbuf_ring(struct io_ring_ctx *ctx, void __user *arg) return 0; } - kfree(free_bl); + kfree_rcu(free_bl, rcu); return ret; } @@ -699,6 +727,8 @@ int io_unregister_pbuf_ring(struct io_ring_ctx *ctx, void __user *arg) struct io_uring_buf_reg reg; struct io_buffer_list *bl; + lockdep_assert_held(&ctx->uring_lock); + if (copy_from_user(®, arg, sizeof(reg))) return -EFAULT; if (reg.resv[0] || reg.resv[1] || reg.resv[2]) @@ -715,7 +745,7 @@ int io_unregister_pbuf_ring(struct io_ring_ctx *ctx, void __user *arg) __io_remove_buffers(ctx, bl, -1U); if (bl->bgid >= BGID_ARRAY) { xa_erase(&ctx->io_bl_xa, bl->bgid); - kfree(bl); + kfree_rcu(bl, rcu); } return 0; } @@ -724,7 +754,15 @@ void *io_pbuf_get_address(struct io_ring_ctx *ctx, unsigned long bgid) { struct io_buffer_list *bl; - bl = io_buffer_get_list(ctx, bgid); + bl = __io_buffer_get_list(ctx, smp_load_acquire(&ctx->io_bl), bgid); + + /* + * Ensure the list is fully setup. Only strictly needed for RCU lookup + * via mmap, and in that case only for the array indexed groups. For + * the xarray lookups, it's either visible and ready, or not at all. + */ + if (!smp_load_acquire(&bl->is_ready)) + return NULL; if (!bl || !bl->is_mmap) return NULL; diff --git a/io_uring/kbuf.h b/io_uring/kbuf.h index 6c7646e6057c..9be5960817ea 100644 --- a/io_uring/kbuf.h +++ b/io_uring/kbuf.h @@ -15,6 +15,7 @@ struct io_buffer_list { struct page **buf_pages; struct io_uring_buf_ring *buf_ring; }; + struct rcu_head rcu; }; __u16 bgid; @@ -28,6 +29,8 @@ struct io_buffer_list { __u8 is_mapped; /* ring mapped provided buffers, but mmap'ed by application */ __u8 is_mmap; + /* bl is visible from an RCU point of view for lookup */ + __u8 is_ready; }; struct io_buffer { -- cgit v1.2.3 From 73363c262d6a7d26063da96610f61baf69a70f7c Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Tue, 28 Nov 2023 10:29:58 -0700 Subject: io_uring: use fget/fput consistently Normally within a syscall it's fine to use fdget/fdput for grabbing a file from the file table, and it's fine within io_uring as well. We do that via io_uring_enter(2), io_uring_register(2), and then also for cancel which is invoked from the latter. io_uring cannot close its own file descriptors as that is explicitly rejected, and for the cancel side of things, the file itself is just used as a lookup cookie. However, it is more prudent to ensure that full references are always grabbed. For anything threaded, either explicitly in the application itself or through use of the io-wq worker threads, this is what happens anyway. Generalize it and use fget/fput throughout. Also see the below link for more details. Link: https://lore.kernel.org/io-uring/CAG48ez1htVSO3TqmrF8QcX2WFuYTRM-VZ_N10i-VZgbtg=NNqw@mail.gmail.com/ Suggested-by: Jann Horn Signed-off-by: Jens Axboe --- io_uring/cancel.c | 11 ++++++----- io_uring/io_uring.c | 36 ++++++++++++++++++------------------ 2 files changed, 24 insertions(+), 23 deletions(-) diff --git a/io_uring/cancel.c b/io_uring/cancel.c index 3c19cccb1aec..8a8b07dfc444 100644 --- a/io_uring/cancel.c +++ b/io_uring/cancel.c @@ -273,7 +273,7 @@ int io_sync_cancel(struct io_ring_ctx *ctx, void __user *arg) }; ktime_t timeout = KTIME_MAX; struct io_uring_sync_cancel_reg sc; - struct fd f = { }; + struct file *file = NULL; DEFINE_WAIT(wait); int ret, i; @@ -295,10 +295,10 @@ int io_sync_cancel(struct io_ring_ctx *ctx, void __user *arg) /* we can grab a normal file descriptor upfront */ if ((cd.flags & IORING_ASYNC_CANCEL_FD) && !(cd.flags & IORING_ASYNC_CANCEL_FD_FIXED)) { - f = fdget(sc.fd); - if (!f.file) + file = fget(sc.fd); + if (!file) return -EBADF; - cd.file = f.file; + cd.file = file; } ret = __io_sync_cancel(current->io_uring, &cd, sc.fd); @@ -348,6 +348,7 @@ int io_sync_cancel(struct io_ring_ctx *ctx, void __user *arg) if (ret == -ENOENT || ret > 0) ret = 0; out: - fdput(f); + if (file) + fput(file); return ret; } diff --git a/io_uring/io_uring.c b/io_uring/io_uring.c index 05f933dddfde..aba5657d287e 100644 --- a/io_uring/io_uring.c +++ b/io_uring/io_uring.c @@ -3652,7 +3652,7 @@ SYSCALL_DEFINE6(io_uring_enter, unsigned int, fd, u32, to_submit, size_t, argsz) { struct io_ring_ctx *ctx; - struct fd f; + struct file *file; long ret; if (unlikely(flags & ~(IORING_ENTER_GETEVENTS | IORING_ENTER_SQ_WAKEUP | @@ -3670,20 +3670,19 @@ SYSCALL_DEFINE6(io_uring_enter, unsigned int, fd, u32, to_submit, if (unlikely(!tctx || fd >= IO_RINGFD_REG_MAX)) return -EINVAL; fd = array_index_nospec(fd, IO_RINGFD_REG_MAX); - f.file = tctx->registered_rings[fd]; - f.flags = 0; - if (unlikely(!f.file)) + file = tctx->registered_rings[fd]; + if (unlikely(!file)) return -EBADF; } else { - f = fdget(fd); - if (unlikely(!f.file)) + file = fget(fd); + if (unlikely(!file)) return -EBADF; ret = -EOPNOTSUPP; - if (unlikely(!io_is_uring_fops(f.file))) + if (unlikely(!io_is_uring_fops(file))) goto out; } - ctx = f.file->private_data; + ctx = file->private_data; ret = -EBADFD; if (unlikely(ctx->flags & IORING_SETUP_R_DISABLED)) goto out; @@ -3777,7 +3776,8 @@ iopoll_locked: } } out: - fdput(f); + if (!(flags & IORING_ENTER_REGISTERED_RING)) + fput(file); return ret; } @@ -4618,7 +4618,7 @@ SYSCALL_DEFINE4(io_uring_register, unsigned int, fd, unsigned int, opcode, { struct io_ring_ctx *ctx; long ret = -EBADF; - struct fd f; + struct file *file; bool use_registered_ring; use_registered_ring = !!(opcode & IORING_REGISTER_USE_REGISTERED_RING); @@ -4637,27 +4637,27 @@ SYSCALL_DEFINE4(io_uring_register, unsigned int, fd, unsigned int, opcode, if (unlikely(!tctx || fd >= IO_RINGFD_REG_MAX)) return -EINVAL; fd = array_index_nospec(fd, IO_RINGFD_REG_MAX); - f.file = tctx->registered_rings[fd]; - f.flags = 0; - if (unlikely(!f.file)) + file = tctx->registered_rings[fd]; + if (unlikely(!file)) return -EBADF; } else { - f = fdget(fd); - if (unlikely(!f.file)) + file = fget(fd); + if (unlikely(!file)) return -EBADF; ret = -EOPNOTSUPP; - if (!io_is_uring_fops(f.file)) + if (!io_is_uring_fops(file)) goto out_fput; } - ctx = f.file->private_data; + ctx = file->private_data; mutex_lock(&ctx->uring_lock); ret = __io_uring_register(ctx, opcode, arg, nr_args); mutex_unlock(&ctx->uring_lock); trace_io_uring_register(ctx, opcode, ctx->nr_user_files, ctx->nr_user_bufs, ret); out_fput: - fdput(f); + if (!use_registered_ring) + fput(file); return ret; } -- cgit v1.2.3 From fad907cffd4bde7384812cf32fcf69becab805cc Mon Sep 17 00:00:00 2001 From: Ming Lei Date: Tue, 28 Nov 2023 20:30:26 +0800 Subject: block: move .bd_inode into 1st cacheline of block_device The .bd_inode field of block_device is used in IO fast path of blkdev_write_iter() and blkdev_llseek(), so it is more efficient to keep it into the 1st cacheline. .bd_openers is only touched in open()/close(), and .bd_size_lock is only for updating bdev capacity, which is in slow path too. So swap .bd_inode layout with .bd_openers & .bd_size_lock to move .bd_inode into the 1st cache line. Cc: Yu Kuai Signed-off-by: Ming Lei Signed-off-by: Yu Kuai Reviewed-by: Christoph Hellwig Link: https://lore.kernel.org/r/20231128123027.971610-2-yukuai1@huaweicloud.com Signed-off-by: Jens Axboe --- include/linux/blk_types.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/include/linux/blk_types.h b/include/linux/blk_types.h index d5c5e59ddbd2..f7d40692dd94 100644 --- a/include/linux/blk_types.h +++ b/include/linux/blk_types.h @@ -49,9 +49,10 @@ struct block_device { bool bd_write_holder; bool bd_has_submit_bio; dev_t bd_dev; + struct inode *bd_inode; /* will die */ + atomic_t bd_openers; spinlock_t bd_size_lock; /* for bd_inode->i_size updates */ - struct inode * bd_inode; /* will die */ void * bd_claiming; void * bd_holder; const struct blk_holder_ops *bd_holder_ops; -- cgit v1.2.3 From 67d995e069535c32829f5d368d919063492cec6e Mon Sep 17 00:00:00 2001 From: Yu Kuai Date: Tue, 28 Nov 2023 20:30:27 +0800 Subject: block: warn once for each partition in bio_check_ro() Commit 1b0a151c10a6 ("blk-core: use pr_warn_ratelimited() in bio_check_ro()") fix message storm by limit the rate, however, there will still be lots of message in the long term. Fix it better by warn once for each partition. Signed-off-by: Yu Kuai Signed-off-by: Christoph Hellwig Link: https://lore.kernel.org/r/20231128123027.971610-3-yukuai1@huaweicloud.com Signed-off-by: Jens Axboe --- block/blk-core.c | 14 +++++++++++--- include/linux/blk_types.h | 1 + 2 files changed, 12 insertions(+), 3 deletions(-) diff --git a/block/blk-core.c b/block/blk-core.c index fdf25b8d6e78..2eca76ccf4ee 100644 --- a/block/blk-core.c +++ b/block/blk-core.c @@ -501,9 +501,17 @@ static inline void bio_check_ro(struct bio *bio) if (op_is_write(bio_op(bio)) && bdev_read_only(bio->bi_bdev)) { if (op_is_flush(bio->bi_opf) && !bio_sectors(bio)) return; - pr_warn_ratelimited("Trying to write to read-only block-device %pg\n", - bio->bi_bdev); - /* Older lvm-tools actually trigger this */ + + if (bio->bi_bdev->bd_ro_warned) + return; + + bio->bi_bdev->bd_ro_warned = true; + /* + * Use ioctl to set underlying disk of raid/dm to read-only + * will trigger this. + */ + pr_warn("Trying to write to read-only block-device %pg\n", + bio->bi_bdev); } } diff --git a/include/linux/blk_types.h b/include/linux/blk_types.h index f7d40692dd94..b29ebd53417d 100644 --- a/include/linux/blk_types.h +++ b/include/linux/blk_types.h @@ -70,6 +70,7 @@ struct block_device { #ifdef CONFIG_FAIL_MAKE_REQUEST bool bd_make_it_fail; #endif + bool bd_ro_warned; /* * keep this out-of-line as it's both big and not needed in the fast * path -- cgit v1.2.3 From af54d778a03853801d681c98c0c2a6c316ef9ca7 Mon Sep 17 00:00:00 2001 From: Mukesh Ojha Date: Fri, 17 Nov 2023 20:19:32 +0530 Subject: devcoredump: Send uevent once devcd is ready dev_coredumpm() creates a devcoredump device and adds it to the core kernel framework which eventually end up sending uevent to the user space and later creates a symbolic link to the failed device. An application running in userspace may be interested in this symbolic link to get the name of the failed device. In a issue scenario, once uevent sent to the user space it start reading '/sys/class/devcoredump/devcdX/failing_device' to get the actual name of the device which might not been created and it is in its path of creation. To fix this, suppress sending uevent till the failing device symbolic link gets created and send uevent once symbolic link is created successfully. Fixes: 833c95456a70 ("device coredump: add new device coredump class") Signed-off-by: Mukesh Ojha Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/1700232572-25823-1-git-send-email-quic_mojha@quicinc.com Signed-off-by: Greg Kroah-Hartman --- drivers/base/devcoredump.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/base/devcoredump.c b/drivers/base/devcoredump.c index 91536ee05f14..7e2d1f0d903a 100644 --- a/drivers/base/devcoredump.c +++ b/drivers/base/devcoredump.c @@ -362,6 +362,7 @@ void dev_coredumpm(struct device *dev, struct module *owner, devcd->devcd_dev.class = &devcd_class; mutex_lock(&devcd->mutex); + dev_set_uevent_suppress(&devcd->devcd_dev, true); if (device_add(&devcd->devcd_dev)) goto put_device; @@ -376,6 +377,8 @@ void dev_coredumpm(struct device *dev, struct module *owner, "devcoredump")) dev_warn(dev, "devcoredump create_link failed\n"); + dev_set_uevent_suppress(&devcd->devcd_dev, false); + kobject_uevent(&devcd->devcd_dev.kobj, KOBJ_ADD); INIT_DELAYED_WORK(&devcd->del_wk, devcd_del); schedule_delayed_work(&devcd->del_wk, DEVCD_TIMEOUT); mutex_unlock(&devcd->mutex); -- cgit v1.2.3 From bbc3a46065d08f9ab3412b1f26bbfa778c444833 Mon Sep 17 00:00:00 2001 From: Kent Overstreet Date: Fri, 24 Nov 2023 23:12:45 -0500 Subject: bcachefs: Fix zstd compress workspace size zstd apparently lies about the size of the compression workspace it requires; if we double it compression succeeds. Signed-off-by: Kent Overstreet --- fs/bcachefs/bcachefs.h | 2 +- fs/bcachefs/compress.c | 16 ++++++++++------ 2 files changed, 11 insertions(+), 7 deletions(-) diff --git a/fs/bcachefs/bcachefs.h b/fs/bcachefs/bcachefs.h index e9d753b04a90..dfa22f9d9a1d 100644 --- a/fs/bcachefs/bcachefs.h +++ b/fs/bcachefs/bcachefs.h @@ -931,7 +931,7 @@ struct bch_fs { mempool_t compression_bounce[2]; mempool_t compress_workspace[BCH_COMPRESSION_TYPE_NR]; mempool_t decompress_workspace; - ZSTD_parameters zstd_params; + size_t zstd_workspace_size; struct crypto_shash *sha256; struct crypto_sync_skcipher *chacha20; diff --git a/fs/bcachefs/compress.c b/fs/bcachefs/compress.c index a8b148ec2a2b..51af8ea230ed 100644 --- a/fs/bcachefs/compress.c +++ b/fs/bcachefs/compress.c @@ -354,8 +354,7 @@ static int attempt_compress(struct bch_fs *c, */ unsigned level = min((compression.level * 3) / 2, zstd_max_clevel()); ZSTD_parameters params = zstd_get_params(level, c->opts.encoded_extent_max); - ZSTD_CCtx *ctx = zstd_init_cctx(workspace, - zstd_cctx_workspace_bound(¶ms.cParams)); + ZSTD_CCtx *ctx = zstd_init_cctx(workspace, c->zstd_workspace_size); /* * ZSTD requires that when we decompress we pass in the exact @@ -371,7 +370,7 @@ static int attempt_compress(struct bch_fs *c, size_t len = zstd_compress_cctx(ctx, dst + 4, dst_len - 4 - 7, src, src_len, - &c->zstd_params); + ¶ms); if (zstd_is_error(len)) return 0; @@ -572,6 +571,13 @@ static int __bch2_fs_compress_init(struct bch_fs *c, u64 features) size_t decompress_workspace_size = 0; ZSTD_parameters params = zstd_get_params(zstd_max_clevel(), c->opts.encoded_extent_max); + + /* + * ZSTD is lying: if we allocate the size of the workspace it says it + * requires, it returns memory allocation errors + */ + c->zstd_workspace_size = zstd_cctx_workspace_bound(¶ms.cParams); + struct { unsigned feature; enum bch_compression_type type; @@ -585,13 +591,11 @@ static int __bch2_fs_compress_init(struct bch_fs *c, u64 features) zlib_deflate_workspacesize(MAX_WBITS, DEF_MEM_LEVEL), zlib_inflate_workspacesize(), }, { BCH_FEATURE_zstd, BCH_COMPRESSION_TYPE_zstd, - zstd_cctx_workspace_bound(¶ms.cParams), + c->zstd_workspace_size, zstd_dctx_workspace_bound() }, }, *i; bool have_compressed = false; - c->zstd_params = params; - for (i = compression_types; i < compression_types + ARRAY_SIZE(compression_types); i++) -- cgit v1.2.3 From d5bd37872a93e07ef3f9cbd4e2044ba4e17b5021 Mon Sep 17 00:00:00 2001 From: Kent Overstreet Date: Sat, 25 Nov 2023 21:42:08 -0500 Subject: bcachefs: Add missing validation for jset_entry_data_usage Validation was completely missing for replicas entries in the journal (not the superblock replicas section) - we can't have replicas entries pointing to invalid devices. Signed-off-by: Kent Overstreet --- fs/bcachefs/errcode.h | 1 + fs/bcachefs/journal_io.c | 12 ++++++++- fs/bcachefs/replicas.c | 69 +++++++++++++++++++++++++++--------------------- fs/bcachefs/replicas.h | 2 ++ 4 files changed, 53 insertions(+), 31 deletions(-) diff --git a/fs/bcachefs/errcode.h b/fs/bcachefs/errcode.h index 69b0627c2180..ae7910bf2228 100644 --- a/fs/bcachefs/errcode.h +++ b/fs/bcachefs/errcode.h @@ -210,6 +210,7 @@ x(BCH_ERR_invalid_sb, invalid_sb_members) \ x(BCH_ERR_invalid_sb, invalid_sb_disk_groups) \ x(BCH_ERR_invalid_sb, invalid_sb_replicas) \ + x(BCH_ERR_invalid_sb, invalid_replicas_entry) \ x(BCH_ERR_invalid_sb, invalid_sb_journal) \ x(BCH_ERR_invalid_sb, invalid_sb_journal_seq_blacklist) \ x(BCH_ERR_invalid_sb, invalid_sb_crypt) \ diff --git a/fs/bcachefs/journal_io.c b/fs/bcachefs/journal_io.c index 02e6484f9953..0f17fc5f8d68 100644 --- a/fs/bcachefs/journal_io.c +++ b/fs/bcachefs/journal_io.c @@ -547,6 +547,7 @@ static int journal_entry_data_usage_validate(struct bch_fs *c, struct jset_entry_data_usage *u = container_of(entry, struct jset_entry_data_usage, entry); unsigned bytes = jset_u64s(le16_to_cpu(entry->u64s)) * sizeof(u64); + struct printbuf err = PRINTBUF; int ret = 0; if (journal_entry_err_on(bytes < sizeof(*u) || @@ -555,10 +556,19 @@ static int journal_entry_data_usage_validate(struct bch_fs *c, journal_entry_data_usage_bad_size, "invalid journal entry usage: bad size")) { journal_entry_null_range(entry, vstruct_next(entry)); - return ret; + goto out; } + if (journal_entry_err_on(bch2_replicas_entry_validate(&u->r, c->disk_sb.sb, &err), + c, version, jset, entry, + journal_entry_data_usage_bad_size, + "invalid journal entry usage: %s", err.buf)) { + journal_entry_null_range(entry, vstruct_next(entry)); + goto out; + } +out: fsck_err: + printbuf_exit(&err); return ret; } diff --git a/fs/bcachefs/replicas.c b/fs/bcachefs/replicas.c index 1c3ae13bfced..2008fe8bf706 100644 --- a/fs/bcachefs/replicas.c +++ b/fs/bcachefs/replicas.c @@ -68,6 +68,33 @@ void bch2_replicas_entry_to_text(struct printbuf *out, prt_printf(out, "]"); } +int bch2_replicas_entry_validate(struct bch_replicas_entry *r, + struct bch_sb *sb, + struct printbuf *err) +{ + if (!r->nr_devs) { + prt_printf(err, "no devices in entry "); + goto bad; + } + + if (r->nr_required > 1 && + r->nr_required >= r->nr_devs) { + prt_printf(err, "bad nr_required in entry "); + goto bad; + } + + for (unsigned i = 0; i < r->nr_devs; i++) + if (!bch2_dev_exists(sb, r->devs[i])) { + prt_printf(err, "invalid device %u in entry ", r->devs[i]); + goto bad; + } + + return 0; +bad: + bch2_replicas_entry_to_text(err, r); + return -BCH_ERR_invalid_replicas_entry; +} + void bch2_cpu_replicas_to_text(struct printbuf *out, struct bch_replicas_cpu *r) { @@ -163,7 +190,8 @@ void bch2_devlist_to_replicas(struct bch_replicas_entry *e, } static struct bch_replicas_cpu -cpu_replicas_add_entry(struct bch_replicas_cpu *old, +cpu_replicas_add_entry(struct bch_fs *c, + struct bch_replicas_cpu *old, struct bch_replicas_entry *new_entry) { unsigned i; @@ -173,6 +201,9 @@ cpu_replicas_add_entry(struct bch_replicas_cpu *old, replicas_entry_bytes(new_entry)), }; + for (i = 0; i < new_entry->nr_devs; i++) + BUG_ON(!bch2_dev_exists2(c, new_entry->devs[i])); + BUG_ON(!new_entry->data_type); verify_replicas_entry(new_entry); @@ -382,7 +413,7 @@ static int bch2_mark_replicas_slowpath(struct bch_fs *c, if (c->replicas_gc.entries && !__replicas_has_entry(&c->replicas_gc, new_entry)) { - new_gc = cpu_replicas_add_entry(&c->replicas_gc, new_entry); + new_gc = cpu_replicas_add_entry(c, &c->replicas_gc, new_entry); if (!new_gc.entries) { ret = -BCH_ERR_ENOMEM_cpu_replicas; goto err; @@ -390,7 +421,7 @@ static int bch2_mark_replicas_slowpath(struct bch_fs *c, } if (!__replicas_has_entry(&c->replicas, new_entry)) { - new_r = cpu_replicas_add_entry(&c->replicas, new_entry); + new_r = cpu_replicas_add_entry(c, &c->replicas, new_entry); if (!new_r.entries) { ret = -BCH_ERR_ENOMEM_cpu_replicas; goto err; @@ -598,7 +629,7 @@ int bch2_replicas_set_usage(struct bch_fs *c, if (idx < 0) { struct bch_replicas_cpu n; - n = cpu_replicas_add_entry(&c->replicas, r); + n = cpu_replicas_add_entry(c, &c->replicas, r); if (!n.entries) return -BCH_ERR_ENOMEM_cpu_replicas; @@ -797,7 +828,7 @@ static int bch2_cpu_replicas_validate(struct bch_replicas_cpu *cpu_r, struct bch_sb *sb, struct printbuf *err) { - unsigned i, j; + unsigned i; sort_cmp_size(cpu_r->entries, cpu_r->nr, @@ -808,31 +839,9 @@ static int bch2_cpu_replicas_validate(struct bch_replicas_cpu *cpu_r, struct bch_replicas_entry *e = cpu_replicas_entry(cpu_r, i); - if (e->data_type >= BCH_DATA_NR) { - prt_printf(err, "invalid data type in entry "); - bch2_replicas_entry_to_text(err, e); - return -BCH_ERR_invalid_sb_replicas; - } - - if (!e->nr_devs) { - prt_printf(err, "no devices in entry "); - bch2_replicas_entry_to_text(err, e); - return -BCH_ERR_invalid_sb_replicas; - } - - if (e->nr_required > 1 && - e->nr_required >= e->nr_devs) { - prt_printf(err, "bad nr_required in entry "); - bch2_replicas_entry_to_text(err, e); - return -BCH_ERR_invalid_sb_replicas; - } - - for (j = 0; j < e->nr_devs; j++) - if (!bch2_dev_exists(sb, e->devs[j])) { - prt_printf(err, "invalid device %u in entry ", e->devs[j]); - bch2_replicas_entry_to_text(err, e); - return -BCH_ERR_invalid_sb_replicas; - } + int ret = bch2_replicas_entry_validate(e, sb, err); + if (ret) + return ret; if (i + 1 < cpu_r->nr) { struct bch_replicas_entry *n = diff --git a/fs/bcachefs/replicas.h b/fs/bcachefs/replicas.h index 4887675a86f0..f70a642775d1 100644 --- a/fs/bcachefs/replicas.h +++ b/fs/bcachefs/replicas.h @@ -9,6 +9,8 @@ void bch2_replicas_entry_sort(struct bch_replicas_entry *); void bch2_replicas_entry_to_text(struct printbuf *, struct bch_replicas_entry *); +int bch2_replicas_entry_validate(struct bch_replicas_entry *, + struct bch_sb *, struct printbuf *); void bch2_cpu_replicas_to_text(struct printbuf *, struct bch_replicas_cpu *); static inline struct bch_replicas_entry * -- cgit v1.2.3 From 03013bb0c6b157630018800a456a08646655ea97 Mon Sep 17 00:00:00 2001 From: Kent Overstreet Date: Sat, 25 Nov 2023 23:55:26 -0500 Subject: bcachefs: Fix bucket data type for stripe buckets Signed-off-by: Kent Overstreet --- fs/bcachefs/buckets.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/fs/bcachefs/buckets.c b/fs/bcachefs/buckets.c index 61e4cc09ad83..5a91d3189fcf 100644 --- a/fs/bcachefs/buckets.c +++ b/fs/bcachefs/buckets.c @@ -854,8 +854,12 @@ static int __mark_pointer(struct btree_trans *trans, return ret; *dst_sectors += sectors; - *bucket_data_type = *dirty_sectors || *cached_sectors - ? ptr_data_type : 0; + + if (!*dirty_sectors && !*cached_sectors) + *bucket_data_type = 0; + else if (*bucket_data_type != BCH_DATA_stripe) + *bucket_data_type = ptr_data_type; + return 0; } -- cgit v1.2.3 From 5510a4af521c34df339fcceb0f26ace5b1090ad6 Mon Sep 17 00:00:00 2001 From: Kent Overstreet Date: Sun, 26 Nov 2023 18:31:11 -0500 Subject: bcachefs: Fix split_race livelock bch2_btree_update_start() calculates which nodes are going to have to be split/rewritten, so that we know how many nodes to reserve and how deep in the tree we have to take locks. But btree node merges require inserting two keys into the parent node, not just splits. Signed-off-by: Kent Overstreet --- fs/bcachefs/btree_update_interior.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/fs/bcachefs/btree_update_interior.c b/fs/bcachefs/btree_update_interior.c index d08efd6d958e..d68fb01944b1 100644 --- a/fs/bcachefs/btree_update_interior.c +++ b/fs/bcachefs/btree_update_interior.c @@ -1071,8 +1071,12 @@ bch2_btree_update_start(struct btree_trans *trans, struct btree_path *path, break; } + /* + * Always check for space for two keys, even if we won't have to + * split at prior level - it might have been a merge instead: + */ if (bch2_btree_node_insert_fits(c, path->l[update_level].b, - BKEY_BTREE_PTR_U64s_MAX * (1 + split))) + BKEY_BTREE_PTR_U64s_MAX * 2)) break; split = path->l[update_level].b->nr.live_u64s > BTREE_SPLIT_THRESHOLD(c); -- cgit v1.2.3 From ae4d612cc1f23a6137d0978b1620a2af2e201c1a Mon Sep 17 00:00:00 2001 From: Kent Overstreet Date: Sun, 26 Nov 2023 21:13:54 -0500 Subject: bcachefs: trace_move_extent_start_fail() now includes errcode Renamed from trace_move_extent_alloc_mem_fail, because there are other reasons we colud fail (disk space allocation failure). Signed-off-by: Kent Overstreet --- fs/bcachefs/bcachefs_format.h | 2 +- fs/bcachefs/move.c | 23 ++++++++++------------- fs/bcachefs/trace.h | 6 +++--- 3 files changed, 14 insertions(+), 17 deletions(-) diff --git a/fs/bcachefs/bcachefs_format.h b/fs/bcachefs/bcachefs_format.h index ca0842f9b7e9..1ab1f08d763b 100644 --- a/fs/bcachefs/bcachefs_format.h +++ b/fs/bcachefs/bcachefs_format.h @@ -1532,7 +1532,7 @@ struct bch_sb_field_disk_groups { x(move_extent_write, 36) \ x(move_extent_finish, 37) \ x(move_extent_fail, 38) \ - x(move_extent_alloc_mem_fail, 39) \ + x(move_extent_start_fail, 39) \ x(copygc, 40) \ x(copygc_wait, 41) \ x(gc_gens_end, 42) \ diff --git a/fs/bcachefs/move.c b/fs/bcachefs/move.c index 3b0a501b6baf..0a04adff1144 100644 --- a/fs/bcachefs/move.c +++ b/fs/bcachefs/move.c @@ -49,17 +49,6 @@ static void trace_move_extent_read2(struct bch_fs *c, struct bkey_s_c k) } } -static void trace_move_extent_alloc_mem_fail2(struct bch_fs *c, struct bkey_s_c k) -{ - if (trace_move_extent_alloc_mem_fail_enabled()) { - struct printbuf buf = PRINTBUF; - - bch2_bkey_val_to_text(&buf, c, k); - trace_move_extent_alloc_mem_fail(c, buf.buf); - printbuf_exit(&buf); - } -} - struct moving_io { struct list_head read_list; struct list_head io_list; @@ -349,8 +338,16 @@ err: if (ret == -BCH_ERR_data_update_done) return 0; - this_cpu_inc(c->counters[BCH_COUNTER_move_extent_alloc_mem_fail]); - trace_move_extent_alloc_mem_fail2(c, k); + this_cpu_inc(c->counters[BCH_COUNTER_move_extent_start_fail]); + if (trace_move_extent_start_fail_enabled()) { + struct printbuf buf = PRINTBUF; + + bch2_bkey_val_to_text(&buf, c, k); + prt_str(&buf, ": "); + prt_str(&buf, bch2_err_str(ret)); + trace_move_extent_start_fail(c, buf.buf); + printbuf_exit(&buf); + } return ret; } diff --git a/fs/bcachefs/trace.h b/fs/bcachefs/trace.h index 7857671159b4..fd49b63562c3 100644 --- a/fs/bcachefs/trace.h +++ b/fs/bcachefs/trace.h @@ -754,9 +754,9 @@ TRACE_EVENT(move_extent_fail, TP_printk("%d:%d %s", MAJOR(__entry->dev), MINOR(__entry->dev), __get_str(msg)) ); -DEFINE_EVENT(bkey, move_extent_alloc_mem_fail, - TP_PROTO(struct bch_fs *c, const char *k), - TP_ARGS(c, k) +DEFINE_EVENT(bkey, move_extent_start_fail, + TP_PROTO(struct bch_fs *c, const char *str), + TP_ARGS(c, str) ); TRACE_EVENT(move_data, -- cgit v1.2.3 From dc761f11af2e39119d3a7942e3d10615f3d900e7 Mon Sep 17 00:00:00 2001 From: Stefan Wahren Date: Sat, 18 Nov 2023 13:42:52 +0100 Subject: ARM: dts: bcm2711-rpi-400: Fix delete-node of led_act The LED ACT which is included from bcm2711-rpi-4-b doesn't exists on the Raspberry Pi 400. So the bcm2711-rpi-400.dts tries to use the delete-node directive in order to remove the complete node. Unfortunately the usage get broken in commit 1156e3a78bcc ("ARM: dts: bcm283x: Move ACT LED into separate dtsi") and now ACT and PWR LED using the same GPIO and this prevent probing of led-gpios on Raspberry Pi 400: leds-gpio: probe of leds failed with error -16 So fix the delete-node directive. Fixes: 1156e3a78bcc ("ARM: dts: bcm283x: Move ACT LED into separate dtsi") Signed-off-by: Stefan Wahren Link: https://lore.kernel.org/r/20231118124252.14838-3-wahrenst@gmx.net Signed-off-by: Florian Fainelli --- arch/arm/boot/dts/broadcom/bcm2711-rpi-400.dts | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/arch/arm/boot/dts/broadcom/bcm2711-rpi-400.dts b/arch/arm/boot/dts/broadcom/bcm2711-rpi-400.dts index 1ab8184302db..5a2869a18bd5 100644 --- a/arch/arm/boot/dts/broadcom/bcm2711-rpi-400.dts +++ b/arch/arm/boot/dts/broadcom/bcm2711-rpi-400.dts @@ -36,9 +36,7 @@ gpios = <&gpio 42 GPIO_ACTIVE_HIGH>; }; -&leds { - /delete-node/ led_act; -}; +/delete-node/ &led_act; &pm { /delete-property/ system-power-controller; -- cgit v1.2.3 From e9ba37d9f9a6872b069dd893bd86a7d77ba8c153 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Fri, 11 Aug 2023 13:15:20 +1000 Subject: nouveau: find the smallest page allocation to cover a buffer alloc. With the new uapi we don't have the comp flags on the allocation, so we shouldn't be using the first size that works, we should be iterating until we get the correct one. This reduces allocations from 2MB to 64k in lots of places. Fixes dEQP-VK.memory.allocation.basic.size_8KiB.forward.count_4000 on my ampere/gsp system. Cc: stable@vger.kernel.org # v6.6 Signed-off-by: Dave Airlie Reviewed-by: Faith Ekstrand Signed-off-by: Danilo Krummrich Link: https://patchwork.freedesktop.org/patch/msgid/20230811031520.248341-1-airlied@gmail.com --- drivers/gpu/drm/nouveau/nouveau_bo.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/nouveau/nouveau_bo.c b/drivers/gpu/drm/nouveau/nouveau_bo.c index 0f3bd187ede6..280d1d9a559b 100644 --- a/drivers/gpu/drm/nouveau/nouveau_bo.c +++ b/drivers/gpu/drm/nouveau/nouveau_bo.c @@ -318,8 +318,9 @@ nouveau_bo_alloc(struct nouveau_cli *cli, u64 *size, int *align, u32 domain, (!vmm->page[i].host || vmm->page[i].shift > PAGE_SHIFT)) continue; - if (pi < 0) - pi = i; + /* pick the last one as it will be smallest. */ + pi = i; + /* Stop once the buffer is larger than the current page size. */ if (*size >= 1ULL << vmm->page[i].shift) break; -- cgit v1.2.3 From 45b7955b774f82680db71f460fa01bfcdaaeb514 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Mon, 27 Nov 2023 15:56:33 +0300 Subject: nouveau/gsp/r535: remove a stray unlock in r535_gsp_rpc_send() This unlock doesn't belong here and it leads to a double unlock in the caller, r535_gsp_rpc_push(). Fixes: 176fdcbddfd2 ("drm/nouveau/gsp/r535: add support for booting GSP-RM") Signed-off-by: Dan Carpenter Reviewed-by: Timur Tabi Signed-off-by: Danilo Krummrich Link: https://patchwork.freedesktop.org/patch/msgid/a0293812-c05d-45f0-a535-3f24fe582c02@moroto.mountain --- drivers/gpu/drm/nouveau/nvkm/subdev/gsp/r535.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/drivers/gpu/drm/nouveau/nvkm/subdev/gsp/r535.c b/drivers/gpu/drm/nouveau/nvkm/subdev/gsp/r535.c index dc44f5c7833f..818e5c73b7a6 100644 --- a/drivers/gpu/drm/nouveau/nvkm/subdev/gsp/r535.c +++ b/drivers/gpu/drm/nouveau/nvkm/subdev/gsp/r535.c @@ -365,10 +365,8 @@ r535_gsp_rpc_send(struct nvkm_gsp *gsp, void *argv, bool wait, u32 repc) } ret = r535_gsp_cmdq_push(gsp, rpc); - if (ret) { - mutex_unlock(&gsp->cmdq.mutex); + if (ret) return ERR_PTR(ret); - } if (wait) { msg = r535_gsp_msg_recv(gsp, fn, repc); -- cgit v1.2.3 From 52fdb99cc436014a417750150928c8ff1f69ae66 Mon Sep 17 00:00:00 2001 From: "Gustavo A. R. Silva" Date: Thu, 16 Nov 2023 12:11:43 -0600 Subject: nouveau/gsp: replace zero-length array with flex-array member and use __counted_by Fake flexible arrays (zero-length and one-element arrays) are deprecated, and should be replaced by flexible-array members. So, replace zero-length array with a flexible-array member in `struct PACKED_REGISTRY_TABLE`. Also annotate array `entries` with `__counted_by()` to prepare for the coming implementation by GCC and Clang of the `__counted_by` attribute. Flexible array members annotated with `__counted_by` can have their accesses bounds-checked at run-time via `CONFIG_UBSAN_BOUNDS` (for array indexing) and `CONFIG_FORTIFY_SOURCE` (for strcpy/memcpy-family functions). This fixes multiple -Warray-bounds warnings: drivers/gpu/drm/nouveau/nvkm/subdev/gsp/r535.c:1069:29: warning: array subscript 0 is outside array bounds of 'PACKED_REGISTRY_ENTRY[0]' [-Warray-bounds=] drivers/gpu/drm/nouveau/nvkm/subdev/gsp/r535.c:1070:29: warning: array subscript 0 is outside array bounds of 'PACKED_REGISTRY_ENTRY[0]' [-Warray-bounds=] drivers/gpu/drm/nouveau/nvkm/subdev/gsp/r535.c:1071:29: warning: array subscript 0 is outside array bounds of 'PACKED_REGISTRY_ENTRY[0]' [-Warray-bounds=] drivers/gpu/drm/nouveau/nvkm/subdev/gsp/r535.c:1072:29: warning: array subscript 0 is outside array bounds of 'PACKED_REGISTRY_ENTRY[0]' [-Warray-bounds=] While there, also make use of the struct_size() helper, and address checkpatch.pl warning: WARNING: please, no spaces at the start of a line This results in no differences in binary output. Signed-off-by: Gustavo A. R. Silva Reviewed-by: Kees Cook Signed-off-by: Danilo Krummrich Link: https://patchwork.freedesktop.org/patch/msgid/ZVZbX7C5suLMiBf+@work --- .../drm/nouveau/include/nvrm/535.113.01/nvidia/generated/g_os_nvoc.h | 2 +- drivers/gpu/drm/nouveau/nvkm/subdev/gsp/r535.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/nouveau/include/nvrm/535.113.01/nvidia/generated/g_os_nvoc.h b/drivers/gpu/drm/nouveau/include/nvrm/535.113.01/nvidia/generated/g_os_nvoc.h index 754c6af42f30..10121218f4d3 100644 --- a/drivers/gpu/drm/nouveau/include/nvrm/535.113.01/nvidia/generated/g_os_nvoc.h +++ b/drivers/gpu/drm/nouveau/include/nvrm/535.113.01/nvidia/generated/g_os_nvoc.h @@ -38,7 +38,7 @@ typedef struct PACKED_REGISTRY_TABLE { NvU32 size; NvU32 numEntries; - PACKED_REGISTRY_ENTRY entries[0]; + PACKED_REGISTRY_ENTRY entries[] __counted_by(numEntries); } PACKED_REGISTRY_TABLE; #endif diff --git a/drivers/gpu/drm/nouveau/nvkm/subdev/gsp/r535.c b/drivers/gpu/drm/nouveau/nvkm/subdev/gsp/r535.c index 818e5c73b7a6..f6725a5f5bfb 100644 --- a/drivers/gpu/drm/nouveau/nvkm/subdev/gsp/r535.c +++ b/drivers/gpu/drm/nouveau/nvkm/subdev/gsp/r535.c @@ -1046,7 +1046,7 @@ r535_gsp_rpc_set_registry(struct nvkm_gsp *gsp) char *strings; int str_offset; int i; - size_t rpc_size = sizeof(*rpc) + sizeof(rpc->entries[0]) * NV_GSP_REG_NUM_ENTRIES; + size_t rpc_size = struct_size(rpc, entries, NV_GSP_REG_NUM_ENTRIES); /* add strings + null terminator */ for (i = 0; i < NV_GSP_REG_NUM_ENTRIES; i++) -- cgit v1.2.3 From ef22bb800d967616c7638d204bc1b425beac7f5f Mon Sep 17 00:00:00 2001 From: Paulo Alcantara Date: Sat, 25 Nov 2023 23:55:10 -0300 Subject: smb: client: fix missing mode bits for SMB symlinks When instantiating inodes for SMB symlinks, add the mode bits from @cifs_sb->ctx->file_mode as we already do for the other special files. Cc: stable@vger.kernel.org Signed-off-by: Paulo Alcantara (SUSE) Signed-off-by: Steve French --- fs/smb/client/inode.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/smb/client/inode.c b/fs/smb/client/inode.c index 47f49be69ced..42ef8ca446d0 100644 --- a/fs/smb/client/inode.c +++ b/fs/smb/client/inode.c @@ -790,7 +790,7 @@ bool cifs_reparse_point_to_fattr(struct cifs_sb_info *cifs_sb, case 0: /* SMB1 symlink */ case IO_REPARSE_TAG_SYMLINK: case IO_REPARSE_TAG_NFS: - fattr->cf_mode = S_IFLNK; + fattr->cf_mode = S_IFLNK | cifs_sb->ctx->file_mode; fattr->cf_dtype = DT_LNK; break; default: -- cgit v1.2.3 From 9d63509547a940225d06d7eba1dc412befae255d Mon Sep 17 00:00:00 2001 From: Paulo Alcantara Date: Tue, 28 Nov 2023 16:37:19 -0300 Subject: smb: client: report correct st_size for SMB and NFS symlinks We can't rely on FILE_STANDARD_INFORMATION::EndOfFile for reparse points as they will be always zero. Set it to symlink target's length as specified by POSIX. This will make stat() family of syscalls return the correct st_size for such files. Cc: stable@vger.kernel.org Signed-off-by: Paulo Alcantara (SUSE) Signed-off-by: Steve French --- fs/smb/client/inode.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/fs/smb/client/inode.c b/fs/smb/client/inode.c index 42ef8ca446d0..09c5c0f5c96e 100644 --- a/fs/smb/client/inode.c +++ b/fs/smb/client/inode.c @@ -865,6 +865,8 @@ static void cifs_open_info_to_fattr(struct cifs_fattr *fattr, out_reparse: if (S_ISLNK(fattr->cf_mode)) { + if (likely(data->symlink_target)) + fattr->cf_eof = strnlen(data->symlink_target, PATH_MAX); fattr->cf_symlink_target = data->symlink_target; data->symlink_target = NULL; } -- cgit v1.2.3 From 9870257a0a338cd8d6c1cddab74e703f490f6779 Mon Sep 17 00:00:00 2001 From: Yoshihiro Shimoda Date: Mon, 27 Nov 2023 21:24:20 +0900 Subject: ravb: Fix races between ravb_tx_timeout_work() and net related ops Fix races between ravb_tx_timeout_work() and functions of net_device_ops and ethtool_ops by using rtnl_trylock() and rtnl_unlock(). Note that since ravb_close() is under the rtnl lock and calls cancel_work_sync(), ravb_tx_timeout_work() should calls rtnl_trylock(). Otherwise, a deadlock may happen in ravb_tx_timeout_work() like below: CPU0 CPU1 ravb_tx_timeout() schedule_work() ... __dev_close_many() // Under rtnl lock ravb_close() cancel_work_sync() // Waiting ravb_tx_timeout_work() rtnl_lock() // This is possible to cause a deadlock If rtnl_trylock() fails, rescheduling the work with sleep for 1 msec. Fixes: c156633f1353 ("Renesas Ethernet AVB driver proper") Signed-off-by: Yoshihiro Shimoda Reviewed-by: Sergey Shtylyov Link: https://lore.kernel.org/r/20231127122420.3706751-1-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/renesas/ravb_main.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/renesas/ravb_main.c b/drivers/net/ethernet/renesas/ravb_main.c index c70cff80cc99..7c007ecd3ff6 100644 --- a/drivers/net/ethernet/renesas/ravb_main.c +++ b/drivers/net/ethernet/renesas/ravb_main.c @@ -1874,6 +1874,12 @@ static void ravb_tx_timeout_work(struct work_struct *work) struct net_device *ndev = priv->ndev; int error; + if (!rtnl_trylock()) { + usleep_range(1000, 2000); + schedule_work(&priv->work); + return; + } + netif_tx_stop_all_queues(ndev); /* Stop PTP Clock driver */ @@ -1907,7 +1913,7 @@ static void ravb_tx_timeout_work(struct work_struct *work) */ netdev_err(ndev, "%s: ravb_dmac_init() failed, error %d\n", __func__, error); - return; + goto out_unlock; } ravb_emac_init(ndev); @@ -1917,6 +1923,9 @@ out: ravb_ptp_init(ndev, priv->pdev); netif_tx_start_all_queues(ndev); + +out_unlock: + rtnl_unlock(); } /* Packet transmit function for Ethernet AVB */ -- cgit v1.2.3 From 1b1bd0fd41577400434d5948edc2679092c57b08 Mon Sep 17 00:00:00 2001 From: Kent Overstreet Date: Sun, 26 Nov 2023 23:11:18 -0500 Subject: bcachefs: -EROFS doesn't count as move_extent_start_fail The automated tests check if we've hit too many slowpath/error path events and fail the test - if we're just shutting down, that naturally shouldn't count. Signed-off-by: Kent Overstreet --- fs/bcachefs/move.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/fs/bcachefs/move.c b/fs/bcachefs/move.c index 0a04adff1144..67ac68f9dd3f 100644 --- a/fs/bcachefs/move.c +++ b/fs/bcachefs/move.c @@ -338,6 +338,10 @@ err: if (ret == -BCH_ERR_data_update_done) return 0; + if (bch2_err_matches(ret, EROFS) || + bch2_err_matches(ret, BCH_ERR_transaction_restart)) + return ret; + this_cpu_inc(c->counters[BCH_COUNTER_move_extent_start_fail]); if (trace_move_extent_start_fail_enabled()) { struct printbuf buf = PRINTBUF; -- cgit v1.2.3 From ef0beeb8dd343a57cf8ad4967b508b8e7452f347 Mon Sep 17 00:00:00 2001 From: Kent Overstreet Date: Mon, 27 Nov 2023 00:53:46 -0500 Subject: bcachefs: move journal seq assertion journal_cur_seq() can legitimately be used outside of the journal lock, where this assert can race Signed-off-by: Kent Overstreet --- fs/bcachefs/journal.c | 2 ++ fs/bcachefs/journal.h | 4 +--- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/fs/bcachefs/journal.c b/fs/bcachefs/journal.c index 23a9b7845d11..489b34046e78 100644 --- a/fs/bcachefs/journal.c +++ b/fs/bcachefs/journal.c @@ -321,6 +321,8 @@ static int journal_entry_open(struct journal *j) atomic64_inc(&j->seq); journal_pin_list_init(fifo_push_ref(&j->pin), 1); + BUG_ON(j->pin.back - 1 != atomic64_read(&j->seq)); + BUG_ON(j->buf + (journal_cur_seq(j) & JOURNAL_BUF_MASK) != buf); bkey_extent_init(&buf->key); diff --git a/fs/bcachefs/journal.h b/fs/bcachefs/journal.h index c85d01cf4948..4c513fca5ef2 100644 --- a/fs/bcachefs/journal.h +++ b/fs/bcachefs/journal.h @@ -136,9 +136,7 @@ static inline u64 journal_last_seq(struct journal *j) static inline u64 journal_cur_seq(struct journal *j) { - EBUG_ON(j->pin.back - 1 != atomic64_read(&j->seq)); - - return j->pin.back - 1; + return atomic64_read(&j->seq); } static inline u64 journal_last_unwritten_seq(struct journal *j) -- cgit v1.2.3 From 2111f39459b0b2ec54859b756c625edb0befce0e Mon Sep 17 00:00:00 2001 From: Kent Overstreet Date: Tue, 28 Nov 2023 19:26:23 -0500 Subject: bcachefs: Fix race between btree writes and metadata drop btree writes update the btree node key after every write, in order to update sectors_written, and they also might need to drop pointers if one of the writes failed in a replicated btree node. But the btree node might also have had a pointer dropped while the write was in flight, by bch2_dev_metadata_drop(), and thus there was a bug where the btree node write would ovewrite the btree node's key with what it had at the start of the write. Fix this by dropping pointers not currently in the btree node key. Signed-off-by: Kent Overstreet --- fs/bcachefs/btree_update_interior.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/fs/bcachefs/btree_update_interior.c b/fs/bcachefs/btree_update_interior.c index d68fb01944b1..6697417273aa 100644 --- a/fs/bcachefs/btree_update_interior.c +++ b/fs/bcachefs/btree_update_interior.c @@ -2270,6 +2270,10 @@ int bch2_btree_node_update_key_get_iter(struct btree_trans *trans, BUG_ON(!btree_node_hashed(b)); + struct bch_extent_ptr *ptr; + bch2_bkey_drop_ptrs(bkey_i_to_s(new_key), ptr, + !bch2_bkey_has_device(bkey_i_to_s(&b->key), ptr->dev)); + ret = bch2_btree_node_update_key(trans, &iter, b, new_key, commit_flags, skip_triggers); out: -- cgit v1.2.3 From 463086d99889c84ce0960fac2815c596f26cc0e5 Mon Sep 17 00:00:00 2001 From: Kent Overstreet Date: Tue, 28 Nov 2023 16:31:48 -0500 Subject: bcachefs: Convert gc_alloc_start() to for_each_btree_key2() This eliminates some SRCU warnings: for_each_btree_key2() runs every loop iteration in a distinct transaction context. Signed-off-by: Kent Overstreet --- fs/bcachefs/btree_gc.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/fs/bcachefs/btree_gc.c b/fs/bcachefs/btree_gc.c index 0b5d09c8475d..30ab78a24517 100644 --- a/fs/bcachefs/btree_gc.c +++ b/fs/bcachefs/btree_gc.c @@ -1541,8 +1541,8 @@ static int bch2_gc_alloc_start(struct bch_fs *c, bool metadata_only) rcu_assign_pointer(ca->buckets_gc, buckets); } - for_each_btree_key(trans, iter, BTREE_ID_alloc, POS_MIN, - BTREE_ITER_PREFETCH, k, ret) { + ret = for_each_btree_key2(trans, iter, BTREE_ID_alloc, POS_MIN, + BTREE_ITER_PREFETCH, k, ({ ca = bch_dev_bkey_exists(c, k.k->p.inode); g = gc_bucket(ca, k.k->p.offset); @@ -1561,8 +1561,9 @@ static int bch2_gc_alloc_start(struct bch_fs *c, bool metadata_only) g->stripe = a->stripe; g->stripe_redundancy = a->stripe_redundancy; } - } - bch2_trans_iter_exit(trans, &iter); + + 0; + })); err: bch2_trans_put(trans); if (ret) -- cgit v1.2.3 From 415e5107b0dce0e5407ae4a46700cd7e8859e252 Mon Sep 17 00:00:00 2001 From: Kent Overstreet Date: Tue, 28 Nov 2023 16:33:52 -0500 Subject: bcachefs: Extra kthread_should_stop() calls for copygc This fixes a bug where going read-only was taking longer than it should have due to copygc forgetting to check kthread_should_stop() Additionally: fix a missing is_kthread check in bch2_move_ratelimit(). Signed-off-by: Kent Overstreet --- fs/bcachefs/move.c | 12 +++++++++--- fs/bcachefs/movinggc.c | 2 +- 2 files changed, 10 insertions(+), 4 deletions(-) diff --git a/fs/bcachefs/move.c b/fs/bcachefs/move.c index 67ac68f9dd3f..54830ee0ed88 100644 --- a/fs/bcachefs/move.c +++ b/fs/bcachefs/move.c @@ -441,24 +441,26 @@ int bch2_move_get_io_opts_one(struct btree_trans *trans, int bch2_move_ratelimit(struct moving_context *ctxt) { struct bch_fs *c = ctxt->trans->c; + bool is_kthread = current->flags & PF_KTHREAD; u64 delay; if (ctxt->wait_on_copygc && c->copygc_running) { bch2_moving_ctxt_flush_all(ctxt); wait_event_killable(c->copygc_running_wq, !c->copygc_running || - kthread_should_stop()); + (is_kthread && kthread_should_stop())); } do { delay = ctxt->rate ? bch2_ratelimit_delay(ctxt->rate) : 0; - if ((current->flags & PF_KTHREAD) && kthread_should_stop()) + if (is_kthread && kthread_should_stop()) return 1; if (delay) move_ctxt_wait_event_timeout(ctxt, - freezing(current) || kthread_should_stop(), + freezing(current) || + (is_kthread && kthread_should_stop()), delay); if (unlikely(freezing(current))) { @@ -633,6 +635,7 @@ int __bch2_evacuate_bucket(struct moving_context *ctxt, { struct btree_trans *trans = ctxt->trans; struct bch_fs *c = trans->c; + bool is_kthread = current->flags & PF_KTHREAD; struct bch_io_opts io_opts = bch2_opts_to_inode_opts(c->opts); struct btree_iter iter; struct bkey_buf sk; @@ -678,6 +681,9 @@ int __bch2_evacuate_bucket(struct moving_context *ctxt, } while (!(ret = bch2_move_ratelimit(ctxt))) { + if (is_kthread && kthread_should_stop()) + break; + bch2_trans_begin(trans); ret = bch2_get_next_backpointer(trans, bucket, gen, diff --git a/fs/bcachefs/movinggc.c b/fs/bcachefs/movinggc.c index 0a0576326c5b..a84e79f79e5e 100644 --- a/fs/bcachefs/movinggc.c +++ b/fs/bcachefs/movinggc.c @@ -207,7 +207,7 @@ static int bch2_copygc(struct moving_context *ctxt, goto err; darray_for_each(buckets, i) { - if (unlikely(freezing(current))) + if (kthread_should_stop() || freezing(current)) break; f = move_bucket_in_flight_add(buckets_in_flight, *i); -- cgit v1.2.3 From 503579448db93f9fbcc93cd99a1f2d5aa4b2cda6 Mon Sep 17 00:00:00 2001 From: Tvrtko Ursulin Date: Thu, 16 Nov 2023 08:44:56 +0000 Subject: drm/i915/gsc: Mark internal GSC engine with reserved uabi class The GSC CS is not exposed to the user, so we skipped assigning a uabi class number for it. However, the trace logs use the uabi class and instance to identify the engine, so leaving uabi class unset makes the GSC CS show up as the RCS in those logs. Given that the engine is not exposed to the user, we can't add a new case in the uabi enum, so we insted internally define a kernel internal class as -1. At the same time remove special handling for the name and complete the uabi_classes array so internal class is automatically correctly assigned. Engine will show as 65535:0 other0 in the logs/traces which should be unique enough. v2: * Fix uabi class u8 vs u16 type confusion. Signed-off-by: Tvrtko Ursulin Fixes: 194babe26bdc ("drm/i915/mtl: don't expose GSC command streamer to the user") Cc: Daniele Ceraolo Spurio Cc: Alan Previn Cc: Matt Roper Reviewed-by: Daniele Ceraolo Spurio Link: https://patchwork.freedesktop.org/patch/msgid/20231116084456.291533-1-tvrtko.ursulin@linux.intel.com (cherry picked from commit dfed6b58d54f3a5d7e6bc1fb060e2c936330eba2) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/gt/intel_engine_user.c | 39 ++++++++++++++++------------- 1 file changed, 22 insertions(+), 17 deletions(-) diff --git a/drivers/gpu/drm/i915/gt/intel_engine_user.c b/drivers/gpu/drm/i915/gt/intel_engine_user.c index 118164ddbb2e..833987015b8b 100644 --- a/drivers/gpu/drm/i915/gt/intel_engine_user.c +++ b/drivers/gpu/drm/i915/gt/intel_engine_user.c @@ -41,12 +41,15 @@ void intel_engine_add_user(struct intel_engine_cs *engine) llist_add(&engine->uabi_llist, &engine->i915->uabi_engines_llist); } -static const u8 uabi_classes[] = { +#define I915_NO_UABI_CLASS ((u16)(-1)) + +static const u16 uabi_classes[] = { [RENDER_CLASS] = I915_ENGINE_CLASS_RENDER, [COPY_ENGINE_CLASS] = I915_ENGINE_CLASS_COPY, [VIDEO_DECODE_CLASS] = I915_ENGINE_CLASS_VIDEO, [VIDEO_ENHANCEMENT_CLASS] = I915_ENGINE_CLASS_VIDEO_ENHANCE, [COMPUTE_CLASS] = I915_ENGINE_CLASS_COMPUTE, + [OTHER_CLASS] = I915_NO_UABI_CLASS, /* Not exposed to users, no uabi class. */ }; static int engine_cmp(void *priv, const struct list_head *A, @@ -200,6 +203,7 @@ static void engine_rename(struct intel_engine_cs *engine, const char *name, u16 void intel_engines_driver_register(struct drm_i915_private *i915) { + u16 name_instance, other_instance = 0; struct legacy_ring ring = {}; struct list_head *it, *next; struct rb_node **p, *prev; @@ -216,27 +220,28 @@ void intel_engines_driver_register(struct drm_i915_private *i915) if (intel_gt_has_unrecoverable_error(engine->gt)) continue; /* ignore incomplete engines */ - /* - * We don't want to expose the GSC engine to the users, but we - * still rename it so it is easier to identify in the debug logs - */ - if (engine->id == GSC0) { - engine_rename(engine, "gsc", 0); - continue; - } - GEM_BUG_ON(engine->class >= ARRAY_SIZE(uabi_classes)); engine->uabi_class = uabi_classes[engine->class]; + if (engine->uabi_class == I915_NO_UABI_CLASS) { + name_instance = other_instance++; + } else { + GEM_BUG_ON(engine->uabi_class >= + ARRAY_SIZE(i915->engine_uabi_class_count)); + name_instance = + i915->engine_uabi_class_count[engine->uabi_class]++; + } + engine->uabi_instance = name_instance; - GEM_BUG_ON(engine->uabi_class >= - ARRAY_SIZE(i915->engine_uabi_class_count)); - engine->uabi_instance = - i915->engine_uabi_class_count[engine->uabi_class]++; - - /* Replace the internal name with the final user facing name */ + /* + * Replace the internal name with the final user and log facing + * name. + */ engine_rename(engine, intel_engine_class_repr(engine->class), - engine->uabi_instance); + name_instance); + + if (engine->uabi_class == I915_NO_UABI_CLASS) + continue; rb_link_node(&engine->uabi_node, prev, p); rb_insert_color(&engine->uabi_node, &i915->uabi_engines); -- cgit v1.2.3 From f76f83a83c8fdbb62acbf8bd945f10821768145b Mon Sep 17 00:00:00 2001 From: Ville Syrjälä Date: Tue, 14 Nov 2023 16:23:33 +0200 Subject: drm/i915: Also check for VGA converter in eDP probe MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Unfortunately even the HPD based detection added in commit cfe5bdfb27fa ("drm/i915: Check HPD live state during eDP probe") fails to detect that the VBT's eDP/DDI-A is a ghost on Asus B360M-A (CFL+CNP). On that board eDP/DDI-A has its HPD asserted despite nothing being actually connected there :( The straps/fuses also indicate that the eDP port is present. So if one boots with a VGA monitor connected the eDP probe will mistake the DP->VGA converter hooked to DDI-E for an eDP panel on DDI-A. As a last resort check what kind of DP device we've detected, and if it looks like a DP->VGA converter then conclude that the eDP port should be ignored. Cc: stable@vger.kernel.org Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/9636 Fixes: cfe5bdfb27fa ("drm/i915: Check HPD live state during eDP probe") Signed-off-by: Ville Syrjälä Link: https://patchwork.freedesktop.org/patch/msgid/20231114142333.15799-1-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula (cherry picked from commit fcd479a79120bf0cd507d85f898297a3b868dda6) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/display/intel_dp.c | 28 ++++++++++++++++++++++------ 1 file changed, 22 insertions(+), 6 deletions(-) diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c index 2c1034578984..2852958dd4e7 100644 --- a/drivers/gpu/drm/i915/display/intel_dp.c +++ b/drivers/gpu/drm/i915/display/intel_dp.c @@ -6037,8 +6037,7 @@ static bool intel_edp_init_connector(struct intel_dp *intel_dp, * (eg. Acer Chromebook C710), so we'll check it only if multiple * ports are attempting to use the same AUX CH, according to VBT. */ - if (intel_bios_dp_has_shared_aux_ch(encoder->devdata) && - !intel_digital_port_connected(encoder)) { + if (intel_bios_dp_has_shared_aux_ch(encoder->devdata)) { /* * If this fails, presume the DPCD answer came * from some other port using the same AUX CH. @@ -6046,10 +6045,27 @@ static bool intel_edp_init_connector(struct intel_dp *intel_dp, * FIXME maybe cleaner to check this before the * DPCD read? Would need sort out the VDD handling... */ - drm_info(&dev_priv->drm, - "[ENCODER:%d:%s] HPD is down, disabling eDP\n", - encoder->base.base.id, encoder->base.name); - goto out_vdd_off; + if (!intel_digital_port_connected(encoder)) { + drm_info(&dev_priv->drm, + "[ENCODER:%d:%s] HPD is down, disabling eDP\n", + encoder->base.base.id, encoder->base.name); + goto out_vdd_off; + } + + /* + * Unfortunately even the HPD based detection fails on + * eg. Asus B360M-A (CFL+CNP), so as a last resort fall + * back to checking for a VGA branch device. Only do this + * on known affected platforms to minimize false positives. + */ + if (DISPLAY_VER(dev_priv) == 9 && drm_dp_is_branch(intel_dp->dpcd) && + (intel_dp->dpcd[DP_DOWNSTREAMPORT_PRESENT] & DP_DWN_STRM_PORT_TYPE_MASK) == + DP_DWN_STRM_PORT_TYPE_ANALOG) { + drm_info(&dev_priv->drm, + "[ENCODER:%d:%s] VGA converter detected, disabling eDP\n", + encoder->base.base.id, encoder->base.name); + goto out_vdd_off; + } } mutex_lock(&dev_priv->drm.mode_config.mutex); -- cgit v1.2.3 From d21a3962d3042e6f56ad324cf18bdd64a1e6ecfa Mon Sep 17 00:00:00 2001 From: Ville Syrjälä Date: Tue, 21 Nov 2023 07:43:15 +0200 Subject: drm/i915: Call intel_pre_plane_updates() also for pipes getting enabled MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit We used to call intel_pre_plane_updates() for any pipe going through a modeset whether the pipe was previously enabled or not. This in fact needed to apply all the necessary clock gating workarounds/etc. Restore the correct behaviour. Fixes: 39919997322f ("drm/i915: Disable all planes before modesetting any pipes") Reviewed-by: Jani Nikula Signed-off-by: Ville Syrjälä Link: https://patchwork.freedesktop.org/patch/msgid/20231121054324.9988-3-ville.syrjala@linux.intel.com (cherry picked from commit e0d5ce11ed0a21bb2bf328ad82fd261783c7ad88) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/display/intel_display.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c index 28d85e1e858e..a2a806262c9e 100644 --- a/drivers/gpu/drm/i915/display/intel_display.c +++ b/drivers/gpu/drm/i915/display/intel_display.c @@ -6853,10 +6853,11 @@ static void intel_commit_modeset_disables(struct intel_atomic_state *state) if (!intel_crtc_needs_modeset(new_crtc_state)) continue; + intel_pre_plane_update(state, crtc); + if (!old_crtc_state->hw.active) continue; - intel_pre_plane_update(state, crtc); intel_crtc_disable_planes(state, crtc); } -- cgit v1.2.3 From cae2bdb579ecc9d4219c58a7d3fde1958118dc1d Mon Sep 17 00:00:00 2001 From: Kailang Yang Date: Wed, 29 Nov 2023 15:38:40 +0800 Subject: ALSA: hda/realtek: Add supported ALC257 for ChromeOS ChromeOS want to support ALC257. Add codec ID to some relation function. Signed-off-by: Kailang Yang Cc: Link: https://lore.kernel.org/r/99a88a7dbdb045fd9d934abeb6cec15f@realtek.com Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 0021f0f145a9..f9ddacfd920e 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -3265,6 +3265,7 @@ static void alc_disable_headset_jack_key(struct hda_codec *codec) case 0x10ec0230: case 0x10ec0236: case 0x10ec0256: + case 0x10ec0257: case 0x19e58326: alc_write_coef_idx(codec, 0x48, 0x0); alc_update_coef_idx(codec, 0x49, 0x0045, 0x0); @@ -3294,6 +3295,7 @@ static void alc_enable_headset_jack_key(struct hda_codec *codec) case 0x10ec0230: case 0x10ec0236: case 0x10ec0256: + case 0x10ec0257: case 0x19e58326: alc_write_coef_idx(codec, 0x48, 0xd011); alc_update_coef_idx(codec, 0x49, 0x007f, 0x0045); @@ -6505,6 +6507,7 @@ static void alc_combo_jack_hp_jd_restart(struct hda_codec *codec) case 0x10ec0236: case 0x10ec0255: case 0x10ec0256: + case 0x10ec0257: case 0x19e58326: alc_update_coef_idx(codec, 0x1b, 0x8000, 1 << 15); /* Reset HP JD */ alc_update_coef_idx(codec, 0x1b, 0x8000, 0 << 15); -- cgit v1.2.3 From c8820c92caf0770bec976b01fa9e82bb993c5865 Mon Sep 17 00:00:00 2001 From: Francesco Dolcini Date: Tue, 28 Nov 2023 20:49:35 +0100 Subject: platform/surface: aggregator: fix recv_buf() return value MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Serdev recv_buf() callback is supposed to return the amount of bytes consumed, therefore an int in between 0 and count. Do not return negative number in case of issue, when ssam_controller_receive_buf() returns ESHUTDOWN just returns 0, e.g. no bytes consumed, this keep the exact same behavior as it was before. This fixes a potential WARN in serdev-ttyport.c:ttyport_receive_buf(). Fixes: c167b9c7e3d6 ("platform/surface: Add Surface Aggregator subsystem") Cc: stable@vger.kernel.org Signed-off-by: Francesco Dolcini Reviewed-by: Maximilian Luz Link: https://lore.kernel.org/r/20231128194935.11350-1-francesco@dolcini.it Reviewed-by: Ilpo Järvinen Signed-off-by: Ilpo Järvinen --- drivers/platform/surface/aggregator/core.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/platform/surface/aggregator/core.c b/drivers/platform/surface/aggregator/core.c index 1a6373dea109..6152be38398c 100644 --- a/drivers/platform/surface/aggregator/core.c +++ b/drivers/platform/surface/aggregator/core.c @@ -231,9 +231,12 @@ static int ssam_receive_buf(struct serdev_device *dev, const unsigned char *buf, size_t n) { struct ssam_controller *ctrl; + int ret; ctrl = serdev_device_get_drvdata(dev); - return ssam_controller_receive_buf(ctrl, buf, n); + ret = ssam_controller_receive_buf(ctrl, buf, n); + + return ret < 0 ? 0 : ret; } static void ssam_write_wakeup(struct serdev_device *dev) -- cgit v1.2.3 From 61b94d54421a1f3670ddd5396ec70afe833e9405 Mon Sep 17 00:00:00 2001 From: AngeloGioacchino Del Regno Date: Thu, 6 Jul 2023 11:58:41 +0200 Subject: arm64: dts: mediatek: mt8195: Fix PM suspend/resume with venc clocks Before suspending the LARBs we're making sure that any operation is done: this never happens because we are unexpectedly unclocking the LARB20 before executing the suspend handler for the MediaTek Smart Multimedia Interface (SMI) and the cause of this is incorrect clocks on this LARB. Fix this issue by changing the Local Arbiter 20 (used by the video encoder secondary core) apb clock to CLK_VENC_CORE1_VENC; furthermore, in order to make sure that both the PM resume and video encoder operation is stable, add the CLK_VENC(_CORE1)_LARB clock to the VENC (main core) and VENC_CORE1 power domains, as this IP cannot communicate with the rest of the system (the AP) without local arbiter clocks being operational. Cc: stable@vger.kernel.org Fixes: 3b5838d1d82e ("arm64: dts: mt8195: Add iommu and smi nodes") Fixes: 2b515194bf0c ("arm64: dts: mt8195: Add power domains controller") Reviewed-by: Alexandre Mergnat Link: https://lore.kernel.org/r/20230706095841.109315-1-angelogioacchino.delregno@collabora.com Signed-off-by: AngeloGioacchino Del Regno --- arch/arm64/boot/dts/mediatek/mt8195.dtsi | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/mediatek/mt8195.dtsi b/arch/arm64/boot/dts/mediatek/mt8195.dtsi index 54c674c45b49..e0ac2e9f5b72 100644 --- a/arch/arm64/boot/dts/mediatek/mt8195.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8195.dtsi @@ -627,6 +627,8 @@ power-domain@MT8195_POWER_DOMAIN_VENC_CORE1 { reg = ; + clocks = <&vencsys_core1 CLK_VENC_CORE1_LARB>; + clock-names = "venc1-larb"; mediatek,infracfg = <&infracfg_ao>; #power-domain-cells = <0>; }; @@ -689,6 +691,8 @@ power-domain@MT8195_POWER_DOMAIN_VENC { reg = ; + clocks = <&vencsys CLK_VENC_LARB>; + clock-names = "venc0-larb"; mediatek,infracfg = <&infracfg_ao>; #power-domain-cells = <0>; }; @@ -2665,7 +2669,7 @@ reg = <0 0x1b010000 0 0x1000>; mediatek,larb-id = <20>; mediatek,smi = <&smi_common_vpp>; - clocks = <&vencsys_core1 CLK_VENC_CORE1_LARB>, + clocks = <&vencsys_core1 CLK_VENC_CORE1_VENC>, <&vencsys_core1 CLK_VENC_CORE1_GALS>, <&vppsys0 CLK_VPP0_GALS_VDO0_VDO1_VENCSYS_CORE1>; clock-names = "apb", "smi", "gals"; -- cgit v1.2.3 From 19cba9a6c071db57888dc6b2ec1d9bf8996ea681 Mon Sep 17 00:00:00 2001 From: AngeloGioacchino Del Regno Date: Wed, 25 Oct 2023 11:38:13 +0200 Subject: arm64: dts: mediatek: mt8183: Fix unit address for scp reserved memory The reserved memory for scp had node name "scp_mem_region" and also without unit-address: change the name to "memory@(address)". This fixes a unit_address_vs_reg warning. Cc: stable@vger.kernel.org Fixes: 1652dbf7363a ("arm64: dts: mt8183: add scp node") Link: https://lore.kernel.org/r/20231025093816.44327-6-angelogioacchino.delregno@collabora.com Signed-off-by: AngeloGioacchino Del Regno --- arch/arm64/boot/dts/mediatek/mt8183-evb.dts | 2 +- arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm64/boot/dts/mediatek/mt8183-evb.dts b/arch/arm64/boot/dts/mediatek/mt8183-evb.dts index ce336a48c897..7adf473f15dc 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183-evb.dts +++ b/arch/arm64/boot/dts/mediatek/mt8183-evb.dts @@ -31,7 +31,7 @@ #address-cells = <2>; #size-cells = <2>; ranges; - scp_mem_reserved: scp_mem_region { + scp_mem_reserved: memory@50000000 { compatible = "shared-dma-pool"; reg = <0 0x50000000 0 0x2900000>; no-map; diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi index bf7de35ffcbc..6e421e941e3a 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi @@ -116,7 +116,7 @@ #size-cells = <2>; ranges; - scp_mem_reserved: scp_mem_region { + scp_mem_reserved: memory@50000000 { compatible = "shared-dma-pool"; reg = <0 0x50000000 0 0x2900000>; no-map; -- cgit v1.2.3 From 9dea1c724fc36643e83216c1f5a26613412150db Mon Sep 17 00:00:00 2001 From: AngeloGioacchino Del Regno Date: Wed, 25 Oct 2023 11:38:14 +0200 Subject: arm64: dts: mediatek: mt8183-evb: Fix unit_address_vs_reg warning on ntc The NTC is defined as ntc@0 but it doesn't need any address at all. Fix the unit_address_vs_reg warning by dropping the unit address: since the node name has to be generic also fully rename it from ntc@0 to thermal-sensor. Cc: stable@vger.kernel.org Fixes: ff9ea5c62279 ("arm64: dts: mediatek: mt8183-evb: Add node for thermistor") Link: https://lore.kernel.org/r/20231025093816.44327-7-angelogioacchino.delregno@collabora.com Signed-off-by: AngeloGioacchino Del Regno --- arch/arm64/boot/dts/mediatek/mt8183-evb.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/mediatek/mt8183-evb.dts b/arch/arm64/boot/dts/mediatek/mt8183-evb.dts index 7adf473f15dc..77f9ab94c00b 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183-evb.dts +++ b/arch/arm64/boot/dts/mediatek/mt8183-evb.dts @@ -38,7 +38,7 @@ }; }; - ntc@0 { + thermal-sensor { compatible = "murata,ncp03wf104"; pullup-uv = <1800000>; pullup-ohm = <390000>; -- cgit v1.2.3 From 24165c5dad7ba7c7624d05575a5e0cc851396c71 Mon Sep 17 00:00:00 2001 From: AngeloGioacchino Del Regno Date: Wed, 25 Oct 2023 11:38:15 +0200 Subject: arm64: dts: mediatek: mt8173-evb: Fix regulator-fixed node names Fix a unit_address_vs_reg warning for the USB VBUS fixed regulators by renaming the regulator nodes from regulator@{0,1} to regulator-usb-p0 and regulator-usb-p1. Cc: stable@vger.kernel.org Fixes: c0891284a74a ("arm64: dts: mediatek: add USB3 DRD driver") Link: https://lore.kernel.org/r/20231025093816.44327-8-angelogioacchino.delregno@collabora.com Signed-off-by: AngeloGioacchino Del Regno --- arch/arm64/boot/dts/mediatek/mt8173-evb.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm64/boot/dts/mediatek/mt8173-evb.dts b/arch/arm64/boot/dts/mediatek/mt8173-evb.dts index 5122963d8743..d258c80213b2 100644 --- a/arch/arm64/boot/dts/mediatek/mt8173-evb.dts +++ b/arch/arm64/boot/dts/mediatek/mt8173-evb.dts @@ -44,7 +44,7 @@ id-gpio = <&pio 16 GPIO_ACTIVE_HIGH>; }; - usb_p1_vbus: regulator@0 { + usb_p1_vbus: regulator-usb-p1 { compatible = "regulator-fixed"; regulator-name = "usb_vbus"; regulator-min-microvolt = <5000000>; @@ -53,7 +53,7 @@ enable-active-high; }; - usb_p0_vbus: regulator@1 { + usb_p0_vbus: regulator-usb-p0 { compatible = "regulator-fixed"; regulator-name = "vbus"; regulator-min-microvolt = <5000000>; -- cgit v1.2.3 From 5a60d63439694590cd5ab1f998fc917ff7ba1c1d Mon Sep 17 00:00:00 2001 From: AngeloGioacchino Del Regno Date: Wed, 25 Oct 2023 11:38:16 +0200 Subject: arm64: dts: mediatek: mt8183: Move thermal-zones to the root node The thermal zones are not a soc bus device: move it to the root node to solve simple_bus_reg warnings. Cc: stable@vger.kernel.org Fixes: b325ce39785b ("arm64: dts: mt8183: add thermal zone node") Link: https://lore.kernel.org/r/20231025093816.44327-9-angelogioacchino.delregno@collabora.com Signed-off-by: AngeloGioacchino Del Regno --- arch/arm64/boot/dts/mediatek/mt8183.dtsi | 242 +++++++++++++++---------------- 1 file changed, 121 insertions(+), 121 deletions(-) diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi index 5169779d01df..976dc968b3ca 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi @@ -1210,127 +1210,6 @@ nvmem-cell-names = "calibration-data"; }; - thermal_zones: thermal-zones { - cpu_thermal: cpu-thermal { - polling-delay-passive = <100>; - polling-delay = <500>; - thermal-sensors = <&thermal 0>; - sustainable-power = <5000>; - - trips { - threshold: trip-point0 { - temperature = <68000>; - hysteresis = <2000>; - type = "passive"; - }; - - target: trip-point1 { - temperature = <80000>; - hysteresis = <2000>; - type = "passive"; - }; - - cpu_crit: cpu-crit { - temperature = <115000>; - hysteresis = <2000>; - type = "critical"; - }; - }; - - cooling-maps { - map0 { - trip = <&target>; - cooling-device = <&cpu0 - THERMAL_NO_LIMIT - THERMAL_NO_LIMIT>, - <&cpu1 - THERMAL_NO_LIMIT - THERMAL_NO_LIMIT>, - <&cpu2 - THERMAL_NO_LIMIT - THERMAL_NO_LIMIT>, - <&cpu3 - THERMAL_NO_LIMIT - THERMAL_NO_LIMIT>; - contribution = <3072>; - }; - map1 { - trip = <&target>; - cooling-device = <&cpu4 - THERMAL_NO_LIMIT - THERMAL_NO_LIMIT>, - <&cpu5 - THERMAL_NO_LIMIT - THERMAL_NO_LIMIT>, - <&cpu6 - THERMAL_NO_LIMIT - THERMAL_NO_LIMIT>, - <&cpu7 - THERMAL_NO_LIMIT - THERMAL_NO_LIMIT>; - contribution = <1024>; - }; - }; - }; - - /* The tzts1 ~ tzts6 don't need to polling */ - /* The tzts1 ~ tzts6 don't need to thermal throttle */ - - tzts1: tzts1 { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&thermal 1>; - sustainable-power = <5000>; - trips {}; - cooling-maps {}; - }; - - tzts2: tzts2 { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&thermal 2>; - sustainable-power = <5000>; - trips {}; - cooling-maps {}; - }; - - tzts3: tzts3 { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&thermal 3>; - sustainable-power = <5000>; - trips {}; - cooling-maps {}; - }; - - tzts4: tzts4 { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&thermal 4>; - sustainable-power = <5000>; - trips {}; - cooling-maps {}; - }; - - tzts5: tzts5 { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&thermal 5>; - sustainable-power = <5000>; - trips {}; - cooling-maps {}; - }; - - tztsABB: tztsABB { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&thermal 6>; - sustainable-power = <5000>; - trips {}; - cooling-maps {}; - }; - }; - pwm0: pwm@1100e000 { compatible = "mediatek,mt8183-disp-pwm"; reg = <0 0x1100e000 0 0x1000>; @@ -2105,4 +1984,125 @@ power-domains = <&spm MT8183_POWER_DOMAIN_CAM>; }; }; + + thermal_zones: thermal-zones { + cpu_thermal: cpu-thermal { + polling-delay-passive = <100>; + polling-delay = <500>; + thermal-sensors = <&thermal 0>; + sustainable-power = <5000>; + + trips { + threshold: trip-point0 { + temperature = <68000>; + hysteresis = <2000>; + type = "passive"; + }; + + target: trip-point1 { + temperature = <80000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu_crit: cpu-crit { + temperature = <115000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&target>; + cooling-device = <&cpu0 + THERMAL_NO_LIMIT + THERMAL_NO_LIMIT>, + <&cpu1 + THERMAL_NO_LIMIT + THERMAL_NO_LIMIT>, + <&cpu2 + THERMAL_NO_LIMIT + THERMAL_NO_LIMIT>, + <&cpu3 + THERMAL_NO_LIMIT + THERMAL_NO_LIMIT>; + contribution = <3072>; + }; + map1 { + trip = <&target>; + cooling-device = <&cpu4 + THERMAL_NO_LIMIT + THERMAL_NO_LIMIT>, + <&cpu5 + THERMAL_NO_LIMIT + THERMAL_NO_LIMIT>, + <&cpu6 + THERMAL_NO_LIMIT + THERMAL_NO_LIMIT>, + <&cpu7 + THERMAL_NO_LIMIT + THERMAL_NO_LIMIT>; + contribution = <1024>; + }; + }; + }; + + /* The tzts1 ~ tzts6 don't need to polling */ + /* The tzts1 ~ tzts6 don't need to thermal throttle */ + + tzts1: tzts1 { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&thermal 1>; + sustainable-power = <5000>; + trips {}; + cooling-maps {}; + }; + + tzts2: tzts2 { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&thermal 2>; + sustainable-power = <5000>; + trips {}; + cooling-maps {}; + }; + + tzts3: tzts3 { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&thermal 3>; + sustainable-power = <5000>; + trips {}; + cooling-maps {}; + }; + + tzts4: tzts4 { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&thermal 4>; + sustainable-power = <5000>; + trips {}; + cooling-maps {}; + }; + + tzts5: tzts5 { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&thermal 5>; + sustainable-power = <5000>; + trips {}; + cooling-maps {}; + }; + + tztsABB: tztsABB { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&thermal 6>; + sustainable-power = <5000>; + trips {}; + cooling-maps {}; + }; + }; }; -- cgit v1.2.3 From 8980c30141d3986beab815d85762b9c67196ed72 Mon Sep 17 00:00:00 2001 From: Hsin-Yi Wang Date: Thu, 26 Oct 2023 12:09:10 -0700 Subject: arm64: dts: mt8183: kukui: Fix underscores in node names Replace underscores with hyphens in pinctrl node names both for consistency and to adhere to the bindings. Cc: stable@vger.kernel.org Fixes: cd894e274b74 ("arm64: dts: mt8183: Add krane-sku176 board") Fixes: 1652dbf7363a ("arm64: dts: mt8183: add scp node") Fixes: 27eaf34df364 ("arm64: dts: mt8183: config dsi node") Signed-off-by: Hsin-Yi Wang Reviewed-by: AngeloGioacchino Del Regno Link: https://lore.kernel.org/r/20231026191343.3345279-2-hsinyi@chromium.org Signed-off-by: AngeloGioacchino Del Regno --- .../boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi | 6 +- arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi | 94 +++++++++++----------- 2 files changed, 50 insertions(+), 50 deletions(-) diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi index bf97b60ae4d1..06fde1a9aab7 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi @@ -441,20 +441,20 @@ }; touchscreen_pins: touchscreen-pins { - touch_int_odl { + touch-int-odl { pinmux = ; input-enable; bias-pull-up; }; - touch_rst_l { + touch-rst-l { pinmux = ; output-high; }; }; trackpad_pins: trackpad-pins { - trackpad_int { + trackpad-int { pinmux = ; input-enable; bias-disable; /* pulled externally */ diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi index 6e421e941e3a..7881a27be029 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi @@ -460,7 +460,7 @@ &pio { aud_pins_default: audiopins { - pins_bus { + pins-bus { pinmux = , , , @@ -482,7 +482,7 @@ }; aud_pins_tdm_out_on: audiotdmouton { - pins_bus { + pins-bus { pinmux = , , , @@ -494,7 +494,7 @@ }; aud_pins_tdm_out_off: audiotdmoutoff { - pins_bus { + pins-bus { pinmux = , , , @@ -508,13 +508,13 @@ }; bt_pins: bt-pins { - pins_bt_en { + pins-bt-en { pinmux = ; output-low; }; }; - ec_ap_int_odl: ec_ap_int_odl { + ec_ap_int_odl: ec-ap-int-odl { pins1 { pinmux = ; input-enable; @@ -522,7 +522,7 @@ }; }; - h1_int_od_l: h1_int_od_l { + h1_int_od_l: h1-int-od-l { pins1 { pinmux = ; input-enable; @@ -530,7 +530,7 @@ }; i2c0_pins: i2c0 { - pins_bus { + pins-bus { pinmux = , ; mediatek,pull-up-adv = <3>; @@ -539,7 +539,7 @@ }; i2c1_pins: i2c1 { - pins_bus { + pins-bus { pinmux = , ; mediatek,pull-up-adv = <3>; @@ -548,7 +548,7 @@ }; i2c2_pins: i2c2 { - pins_bus { + pins-bus { pinmux = , ; bias-disable; @@ -557,7 +557,7 @@ }; i2c3_pins: i2c3 { - pins_bus { + pins-bus { pinmux = , ; mediatek,pull-up-adv = <3>; @@ -566,7 +566,7 @@ }; i2c4_pins: i2c4 { - pins_bus { + pins-bus { pinmux = , ; bias-disable; @@ -575,7 +575,7 @@ }; i2c5_pins: i2c5 { - pins_bus { + pins-bus { pinmux = , ; mediatek,pull-up-adv = <3>; @@ -584,7 +584,7 @@ }; i2c6_pins: i2c6 { - pins_bus { + pins-bus { pinmux = , ; bias-disable; @@ -592,7 +592,7 @@ }; mmc0_pins_default: mmc0-pins-default { - pins_cmd_dat { + pins-cmd-dat { pinmux = , , , @@ -607,13 +607,13 @@ mediatek,pull-up-adv = <01>; }; - pins_clk { + pins-clk { pinmux = ; drive-strength = ; mediatek,pull-down-adv = <10>; }; - pins_rst { + pins-rst { pinmux = ; drive-strength = ; mediatek,pull-down-adv = <01>; @@ -621,7 +621,7 @@ }; mmc0_pins_uhs: mmc0-pins-uhs { - pins_cmd_dat { + pins-cmd-dat { pinmux = , , , @@ -636,19 +636,19 @@ mediatek,pull-up-adv = <01>; }; - pins_clk { + pins-clk { pinmux = ; drive-strength = ; mediatek,pull-down-adv = <10>; }; - pins_ds { + pins-ds { pinmux = ; drive-strength = ; mediatek,pull-down-adv = <10>; }; - pins_rst { + pins-rst { pinmux = ; drive-strength = ; mediatek,pull-up-adv = <01>; @@ -656,7 +656,7 @@ }; mmc1_pins_default: mmc1-pins-default { - pins_cmd_dat { + pins-cmd-dat { pinmux = , , , @@ -666,7 +666,7 @@ mediatek,pull-up-adv = <10>; }; - pins_clk { + pins-clk { pinmux = ; input-enable; mediatek,pull-down-adv = <10>; @@ -674,7 +674,7 @@ }; mmc1_pins_uhs: mmc1-pins-uhs { - pins_cmd_dat { + pins-cmd-dat { pinmux = , , , @@ -685,7 +685,7 @@ mediatek,pull-up-adv = <10>; }; - pins_clk { + pins-clk { pinmux = ; drive-strength = ; mediatek,pull-down-adv = <10>; @@ -693,15 +693,15 @@ }; }; - panel_pins_default: panel_pins_default { - panel_reset { + panel_pins_default: panel-pins-default { + panel-reset { pinmux = ; output-low; bias-pull-up; }; }; - pwm0_pin_default: pwm0_pin_default { + pwm0_pin_default: pwm0-pin-default { pins1 { pinmux = ; output-high; @@ -713,14 +713,14 @@ }; scp_pins: scp { - pins_scp_uart { + pins-scp-uart { pinmux = , ; }; }; spi0_pins: spi0 { - pins_spi { + pins-spi { pinmux = , , , @@ -730,7 +730,7 @@ }; spi1_pins: spi1 { - pins_spi { + pins-spi { pinmux = , , , @@ -740,20 +740,20 @@ }; spi2_pins: spi2 { - pins_spi { + pins-spi { pinmux = , , ; bias-disable; }; - pins_spi_mi { + pins-spi-mi { pinmux = ; mediatek,pull-down-adv = <00>; }; }; spi3_pins: spi3 { - pins_spi { + pins-spi { pinmux = , , , @@ -763,7 +763,7 @@ }; spi4_pins: spi4 { - pins_spi { + pins-spi { pinmux = , , , @@ -773,7 +773,7 @@ }; spi5_pins: spi5 { - pins_spi { + pins-spi { pinmux = , , , @@ -783,63 +783,63 @@ }; uart0_pins_default: uart0-pins-default { - pins_rx { + pins-rx { pinmux = ; input-enable; bias-pull-up; }; - pins_tx { + pins-tx { pinmux = ; }; }; uart1_pins_default: uart1-pins-default { - pins_rx { + pins-rx { pinmux = ; input-enable; bias-pull-up; }; - pins_tx { + pins-tx { pinmux = ; }; - pins_rts { + pins-rts { pinmux = ; output-enable; }; - pins_cts { + pins-cts { pinmux = ; input-enable; }; }; uart1_pins_sleep: uart1-pins-sleep { - pins_rx { + pins-rx { pinmux = ; input-enable; bias-pull-up; }; - pins_tx { + pins-tx { pinmux = ; }; - pins_rts { + pins-rts { pinmux = ; output-enable; }; - pins_cts { + pins-cts { pinmux = ; input-enable; }; }; wifi_pins_pwrseq: wifi-pins-pwrseq { - pins_wifi_enable { + pins-wifi-enable { pinmux = ; output-low; }; }; wifi_pins_wakeup: wifi-pins-wakeup { - pins_wifi_wakeup { + pins-wifi-wakeup { pinmux = ; input-enable; }; -- cgit v1.2.3 From 8dfe51c3f6ef31502fca3e2da8cd250ebbe4b8f2 Mon Sep 17 00:00:00 2001 From: Eric Woudstra Date: Wed, 25 Oct 2023 19:08:28 +0200 Subject: arm64: dts: mt7986: fix emmc hs400 mode without uboot initialization Eric reports errors on emmc with hs400 mode when booting linux on bpi-r3 without uboot [1]. Booting with uboot does not show this because clocks seem to be initialized by uboot. Fix this by adding assigned-clocks and assigned-clock-parents like it's done in uboot [2]. [1] https://forum.banana-pi.org/t/bpi-r3-kernel-fails-setting-emmc-clock-to-416m-depends-on-u-boot/15170 [2] https://github.com/u-boot/u-boot/blob/master/arch/arm/dts/mt7986.dtsi#L287 Cc: stable@vger.kernel.org Fixes: 513b49d19b34 ("arm64: dts: mt7986: add mmc related device nodes") Signed-off-by: Eric Woudstra Signed-off-by: Frank Wunderlich Reviewed-by: AngeloGioacchino Del Regno Link: https://lore.kernel.org/r/20231025170832.78727-2-linux@fw-web.de Signed-off-by: AngeloGioacchino Del Regno --- arch/arm64/boot/dts/mediatek/mt7986a.dtsi | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/arm64/boot/dts/mediatek/mt7986a.dtsi b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi index 24eda00e320d..77ddd9e44ed2 100644 --- a/arch/arm64/boot/dts/mediatek/mt7986a.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi @@ -374,6 +374,10 @@ reg = <0 0x11230000 0 0x1000>, <0 0x11c20000 0 0x1000>; interrupts = ; + assigned-clocks = <&topckgen CLK_TOP_EMMC_416M_SEL>, + <&topckgen CLK_TOP_EMMC_250M_SEL>; + assigned-clock-parents = <&apmixedsys CLK_APMIXED_MPLL>, + <&topckgen CLK_TOP_NET1PLL_D5_D2>; clocks = <&topckgen CLK_TOP_EMMC_416M_SEL>, <&infracfg CLK_INFRA_MSDC_HCK_CK>, <&infracfg CLK_INFRA_MSDC_CK>, -- cgit v1.2.3 From 6413cbc17f89b3a160f3a6f3fad1232b1678fe40 Mon Sep 17 00:00:00 2001 From: Frank Wunderlich Date: Wed, 25 Oct 2023 19:08:29 +0200 Subject: arm64: dts: mt7986: define 3W max power to both SFP on BPI-R3 All SFP power supplies are connected to the system VDD33 which is 3v3/8A. Set 3A per SFP slot to allow SFPs work which need more power than the default 1W. Cc: stable@vger.kernel.org Fixes: 8e01fb15b815 ("arm64: dts: mt7986: add Bananapi R3") Signed-off-by: Frank Wunderlich Reviewed-by: AngeloGioacchino Del Regno Link: https://lore.kernel.org/r/20231025170832.78727-3-linux@fw-web.de Signed-off-by: AngeloGioacchino Del Regno --- arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts index af4a4309bda4..f9702284607a 100644 --- a/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts +++ b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts @@ -126,6 +126,7 @@ compatible = "sff,sfp"; i2c-bus = <&i2c_sfp1>; los-gpios = <&pio 46 GPIO_ACTIVE_HIGH>; + maximum-power-milliwatt = <3000>; mod-def0-gpios = <&pio 49 GPIO_ACTIVE_LOW>; tx-disable-gpios = <&pio 20 GPIO_ACTIVE_HIGH>; tx-fault-gpios = <&pio 7 GPIO_ACTIVE_HIGH>; @@ -137,6 +138,7 @@ i2c-bus = <&i2c_sfp2>; los-gpios = <&pio 31 GPIO_ACTIVE_HIGH>; mod-def0-gpios = <&pio 47 GPIO_ACTIVE_LOW>; + maximum-power-milliwatt = <3000>; tx-disable-gpios = <&pio 15 GPIO_ACTIVE_HIGH>; tx-fault-gpios = <&pio 48 GPIO_ACTIVE_HIGH>; }; -- cgit v1.2.3 From 1fcda8ceb014aafd56f10b33e0077c93b5dd45d1 Mon Sep 17 00:00:00 2001 From: Frank Wunderlich Date: Wed, 25 Oct 2023 19:08:30 +0200 Subject: arm64: dts: mt7986: change cooling trips Add Critical and hot trips for emergency system shutdown and limiting system load. Change passive trip to active to make sure fan is activated on the lowest trip. Cc: stable@vger.kernel.org Fixes: 1f5be05132f3 ("arm64: dts: mt7986: add thermal-zones") Fixes: c26f779a2295 ("arm64: dts: mt7986: add pwm-fan and cooling-maps to BPI-R3 dts") Suggested-by: Daniel Golle Signed-off-by: Frank Wunderlich Reviewed-by: AngeloGioacchino Del Regno Link: https://lore.kernel.org/r/20231025170832.78727-4-linux@fw-web.de Signed-off-by: AngeloGioacchino Del Regno --- .../boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts | 10 +++++----- arch/arm64/boot/dts/mediatek/mt7986a.dtsi | 20 ++++++++++++++++---- 2 files changed, 21 insertions(+), 9 deletions(-) diff --git a/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts index f9702284607a..b876e501216b 100644 --- a/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts +++ b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts @@ -152,16 +152,16 @@ trip = <&cpu_trip_active_high>; }; - cpu-active-low { + cpu-active-med { /* active: set fan to cooling level 1 */ cooling-device = <&fan 1 1>; - trip = <&cpu_trip_active_low>; + trip = <&cpu_trip_active_med>; }; - cpu-passive { - /* passive: set fan to cooling level 0 */ + cpu-active-low { + /* active: set fan to cooling level 0 */ cooling-device = <&fan 0 0>; - trip = <&cpu_trip_passive>; + trip = <&cpu_trip_active_low>; }; }; }; diff --git a/arch/arm64/boot/dts/mediatek/mt7986a.dtsi b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi index 77ddd9e44ed2..fc751e049953 100644 --- a/arch/arm64/boot/dts/mediatek/mt7986a.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi @@ -614,22 +614,34 @@ thermal-sensors = <&thermal 0>; trips { + cpu_trip_crit: crit { + temperature = <125000>; + hysteresis = <2000>; + type = "critical"; + }; + + cpu_trip_hot: hot { + temperature = <120000>; + hysteresis = <2000>; + type = "hot"; + }; + cpu_trip_active_high: active-high { temperature = <115000>; hysteresis = <2000>; type = "active"; }; - cpu_trip_active_low: active-low { + cpu_trip_active_med: active-med { temperature = <85000>; hysteresis = <2000>; type = "active"; }; - cpu_trip_passive: passive { - temperature = <40000>; + cpu_trip_active_low: active-low { + temperature = <60000>; hysteresis = <2000>; - type = "passive"; + type = "active"; }; }; }; -- cgit v1.2.3 From 59fa1e51ba54e1f513985a8177969b62973f7fd5 Mon Sep 17 00:00:00 2001 From: AngeloGioacchino Del Regno Date: Thu, 5 Oct 2023 17:11:50 +0200 Subject: arm64: dts: mediatek: mt8186: Change gpu speedbin nvmem cell name MT8186's GPU speedbin value must be interpreted, or the value will not be meaningful. Use the correct "gpu-speedbin" nvmem cell name for the GPU speedbin to allow triggering the cell info fixup handler, hence feeding the right speedbin number to the users. Cc: stable@vger.kernel.org Fixes: 263d2fd02afc ("arm64: dts: mediatek: mt8186: Add GPU speed bin NVMEM cells") Reviewed-by: Chen-Yu Tsai Link: https://lore.kernel.org/r/20231005151150.355536-1-angelogioacchino.delregno@collabora.com Signed-off-by: AngeloGioacchino Del Regno --- arch/arm64/boot/dts/mediatek/mt8186.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/mediatek/mt8186.dtsi b/arch/arm64/boot/dts/mediatek/mt8186.dtsi index f04ae70c470a..f4c4f61c779d 100644 --- a/arch/arm64/boot/dts/mediatek/mt8186.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8186.dtsi @@ -1656,7 +1656,7 @@ #address-cells = <1>; #size-cells = <1>; - gpu_speedbin: gpu-speed-bin@59c { + gpu_speedbin: gpu-speedbin@59c { reg = <0x59c 0x4>; bits = <0 3>; }; -- cgit v1.2.3 From 9adf7580f6d498a5839e02fa1d1535e934364602 Mon Sep 17 00:00:00 2001 From: Eugen Hristev Date: Thu, 5 Oct 2023 13:30:41 +0300 Subject: arm64: dts: mediatek: mt8186: fix clock names for power domains Clocks for each power domain are split into big categories: pd clocks and subsys clocks. According to the binding, all clocks which have a dash '-' in their name are treated as subsys clocks, and must be placed at the end of the list. The other clocks which are pd clocks must come first. Fixed the naming and the placing of all clocks in the power domains. For the avoidance of doubt, prefixed all subsys clocks with the 'subsys' prefix. The binding does not enforce strict clock names, the driver uses them in bulk, only making a difference for pd clocks vs subsys clocks. The above problem appears to be trivial, however, it leads to incorrect power up and power down sequence of the power domains, because some clocks will be mistakenly taken for subsys clocks and viceversa. One consequence is the fact that if the DIS power domain goes power down and power back up during the boot process, when it comes back up, there are still transactions left on the bus which makes the display inoperable. Some of the clocks for the DIS power domain were wrongly using '_' instead of '-', which again made these clocks being treated as pd clocks instead of subsys clocks. Cc: stable@vger.kernel.org Fixes: d9e43c1e7a38 ("arm64: dts: mt8186: Add power domains controller") Signed-off-by: Eugen Hristev Tested-by: Chen-Yu Tsai Reviewed-by: AngeloGioacchino Del Regno Tested-by: AngeloGioacchino Del Regno Reviewed-by: Alexandre Mergnat Link: https://lore.kernel.org/r/20231005103041.352478-1-eugen.hristev@collabora.com Signed-off-by: AngeloGioacchino Del Regno --- arch/arm64/boot/dts/mediatek/mt8186.dtsi | 42 ++++++++++++++++++++------------ 1 file changed, 27 insertions(+), 15 deletions(-) diff --git a/arch/arm64/boot/dts/mediatek/mt8186.dtsi b/arch/arm64/boot/dts/mediatek/mt8186.dtsi index f4c4f61c779d..df0c04f2ba1d 100644 --- a/arch/arm64/boot/dts/mediatek/mt8186.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8186.dtsi @@ -924,7 +924,8 @@ reg = ; clocks = <&topckgen CLK_TOP_SENINF>, <&topckgen CLK_TOP_SENINF1>; - clock-names = "csirx_top0", "csirx_top1"; + clock-names = "subsys-csirx-top0", + "subsys-csirx-top1"; #power-domain-cells = <0>; }; @@ -942,7 +943,8 @@ reg = ; clocks = <&topckgen CLK_TOP_AUDIODSP>, <&topckgen CLK_TOP_ADSP_BUS>; - clock-names = "audioadsp", "adsp_bus"; + clock-names = "audioadsp", + "subsys-adsp-bus"; #address-cells = <1>; #size-cells = <0>; #power-domain-cells = <1>; @@ -975,8 +977,11 @@ <&mmsys CLK_MM_SMI_COMMON>, <&mmsys CLK_MM_SMI_GALS>, <&mmsys CLK_MM_SMI_IOMMU>; - clock-names = "disp", "mdp", "smi_infra", "smi_common", - "smi_gals", "smi_iommu"; + clock-names = "disp", "mdp", + "subsys-smi-infra", + "subsys-smi-common", + "subsys-smi-gals", + "subsys-smi-iommu"; mediatek,infracfg = <&infracfg_ao>; #address-cells = <1>; #size-cells = <0>; @@ -993,15 +998,17 @@ power-domain@MT8186_POWER_DOMAIN_CAM { reg = ; - clocks = <&topckgen CLK_TOP_CAM>, - <&topckgen CLK_TOP_SENINF>, + clocks = <&topckgen CLK_TOP_SENINF>, <&topckgen CLK_TOP_SENINF1>, <&topckgen CLK_TOP_SENINF2>, <&topckgen CLK_TOP_SENINF3>, + <&camsys CLK_CAM2MM_GALS>, <&topckgen CLK_TOP_CAMTM>, - <&camsys CLK_CAM2MM_GALS>; - clock-names = "cam-top", "cam0", "cam1", "cam2", - "cam3", "cam-tm", "gals"; + <&topckgen CLK_TOP_CAM>; + clock-names = "cam0", "cam1", "cam2", + "cam3", "gals", + "subsys-cam-tm", + "subsys-cam-top"; mediatek,infracfg = <&infracfg_ao>; #address-cells = <1>; #size-cells = <0>; @@ -1020,9 +1027,9 @@ power-domain@MT8186_POWER_DOMAIN_IMG { reg = ; - clocks = <&topckgen CLK_TOP_IMG1>, - <&imgsys1 CLK_IMG1_GALS_IMG1>; - clock-names = "img-top", "gals"; + clocks = <&imgsys1 CLK_IMG1_GALS_IMG1>, + <&topckgen CLK_TOP_IMG1>; + clock-names = "gals", "subsys-img-top"; mediatek,infracfg = <&infracfg_ao>; #address-cells = <1>; #size-cells = <0>; @@ -1041,8 +1048,11 @@ <&ipesys CLK_IPE_LARB20>, <&ipesys CLK_IPE_SMI_SUBCOM>, <&ipesys CLK_IPE_GALS_IPE>; - clock-names = "ipe-top", "ipe-larb0", "ipe-larb1", - "ipe-smi", "ipe-gals"; + clock-names = "subsys-ipe-top", + "subsys-ipe-larb0", + "subsys-ipe-larb1", + "subsys-ipe-smi", + "subsys-ipe-gals"; mediatek,infracfg = <&infracfg_ao>; #power-domain-cells = <0>; }; @@ -1061,7 +1071,9 @@ clocks = <&topckgen CLK_TOP_WPE>, <&wpesys CLK_WPE_SMI_LARB8_CK_EN>, <&wpesys CLK_WPE_SMI_LARB8_PCLK_EN>; - clock-names = "wpe0", "larb-ck", "larb-pclk"; + clock-names = "wpe0", + "subsys-larb-ck", + "subsys-larb-pclk"; mediatek,infracfg = <&infracfg_ao>; #power-domain-cells = <0>; }; -- cgit v1.2.3 From 8e6ecbfd44b5542a7598c1c5fc9c6dcb5d367f2a Mon Sep 17 00:00:00 2001 From: Eugen Hristev Date: Mon, 14 Aug 2023 09:50:42 +0300 Subject: arm64: dts: mediatek: mt7622: fix memory node warning check dtbs_check throws a warning at the memory node: Warning (unit_address_vs_reg): /memory: node has a reg or ranges property, but no unit name fix by adding the address into the node name. Cc: stable@vger.kernel.org Fixes: 0b6286dd96c0 ("arm64: dts: mt7622: add bananapi BPI-R64 board") Signed-off-by: Eugen Hristev Reviewed-by: AngeloGioacchino Del Regno Link: https://lore.kernel.org/r/20230814065042.4973-1-eugen.hristev@collabora.com Signed-off-by: AngeloGioacchino Del Regno --- arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts | 2 +- arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts index 3b7a176b7904..c46682150e50 100644 --- a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts +++ b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts @@ -73,7 +73,7 @@ }; }; - memory { + memory@40000000 { reg = <0 0x40000000 0 0x40000000>; }; diff --git a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts index a885a3fbe456..2dc1bdc74e21 100644 --- a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts +++ b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts @@ -55,7 +55,7 @@ }; }; - memory { + memory@40000000 { reg = <0 0x40000000 0 0x20000000>; }; -- cgit v1.2.3 From 74543b303a9abfe4fa253d1fa215281baa05ff3a Mon Sep 17 00:00:00 2001 From: Eugen Hristev Date: Mon, 14 Aug 2023 10:10:53 +0300 Subject: arm64: dts: mediatek: mt8183-kukui-jacuzzi: fix dsi unnecessary cells properties dtbs_check throws a warning at the dsi node: Warning (avoid_unnecessary_addr_size): /soc/dsi@14014000: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property Other DTS have a panel child node with a reg, so the parent dtsi must have the address-cells and size-cells, however this specific DT has the panel removed, but not the cells, hence the warning above. If panel is deleted then the cells must also be deleted since they are tied together, as the child node in this DT does not have a reg. Cc: stable@vger.kernel.org Fixes: cabc71b08eb5 ("arm64: dts: mt8183: Add kukui-jacuzzi-damu board") Signed-off-by: Eugen Hristev Reviewed-by: AngeloGioacchino Del Regno Link: https://lore.kernel.org/r/20230814071053.5459-1-eugen.hristev@collabora.com Signed-off-by: AngeloGioacchino Del Regno --- arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi index 06fde1a9aab7..820260348de9 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi @@ -91,6 +91,8 @@ &dsi0 { status = "okay"; + /delete-property/#size-cells; + /delete-property/#address-cells; /delete-node/panel@0; ports { port { -- cgit v1.2.3 From 5943b8f7449df9881b273db07bdde1e7120dccf0 Mon Sep 17 00:00:00 2001 From: AngeloGioacchino Del Regno Date: Mon, 27 Nov 2023 14:20:26 +0100 Subject: arm64: dts: mediatek: cherry: Fix interrupt cells for MT6360 on I2C7 Change interrupt cells to 2 to suppress interrupts_property warning. Cc: stable@vger.kernel.org Fixes: 0de0fe950f1b ("arm64: dts: mediatek: cherry: Enable MT6360 sub-pmic on I2C7") Link: https://lore.kernel.org/r/20231127132026.165027-1-angelogioacchino.delregno@collabora.com Signed-off-by: AngeloGioacchino Del Regno --- arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi b/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi index dd5b89b73190..5a7cab489ff3 100644 --- a/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi @@ -389,7 +389,7 @@ pinctrl-0 = <&i2c7_pins>; pmic@34 { - #interrupt-cells = <1>; + #interrupt-cells = <2>; compatible = "mediatek,mt6360"; reg = <0x34>; interrupt-controller; -- cgit v1.2.3 From dc158d23b33df9033bcc8e7117e8591dd2f9d125 Mon Sep 17 00:00:00 2001 From: Nicholas Piggin Date: Wed, 22 Nov 2023 12:58:11 +1000 Subject: KVM: PPC: Book3S HV: Fix KVM_RUN clobbering FP/VEC user registers Before running a guest, the host process (e.g., QEMU) FP/VEC registers are saved if they were being used, similarly to when the kernel uses FP registers. The guest values are then loaded into regs, and the host process registers will be restored lazily when it uses FP/VEC. KVM HV has a bug here: the host process registers do get saved, but the user MSR bits remain enabled, which indicates the registers are valid for the process. After they are clobbered by running the guest, this valid indication causes the host process to take on the FP/VEC register values of the guest. Fixes: 34e119c96b2b ("KVM: PPC: Book3S HV P9: Reduce mtmsrd instructions required to save host SPRs") Cc: stable@vger.kernel.org # v5.17+ Signed-off-by: Nicholas Piggin Signed-off-by: Michael Ellerman Link: https://msgid.link/20231122025811.2973-1-npiggin@gmail.com --- arch/powerpc/kernel/process.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c index 392404688cec..9452a54d356c 100644 --- a/arch/powerpc/kernel/process.c +++ b/arch/powerpc/kernel/process.c @@ -1198,11 +1198,11 @@ void kvmppc_save_user_regs(void) usermsr = current->thread.regs->msr; + /* Caller has enabled FP/VEC/VSX/TM in MSR */ if (usermsr & MSR_FP) - save_fpu(current); - + __giveup_fpu(current); if (usermsr & MSR_VEC) - save_altivec(current); + __giveup_altivec(current); #ifdef CONFIG_PPC_TRANSACTIONAL_MEM if (usermsr & MSR_TM) { -- cgit v1.2.3 From 23ab79e8e469e2605beec2e3ccb40d19c68dd2e0 Mon Sep 17 00:00:00 2001 From: Elliot Berman Date: Mon, 20 Nov 2023 09:36:31 -0800 Subject: freezer,sched: Do not restore saved_state of a thawed task It is possible for a task to be thawed multiple times when mixing the *legacy* cgroup freezer and system-wide freezer. To do this, freeze the cgroup, do system-wide freeze/thaw, then thaw the cgroup. When this happens, then a stale saved_state can be written to the task's state and cause task to hang indefinitely. Fix this by only trying to thaw tasks that are actually frozen. This change also has the marginal benefit avoiding unnecessary wake_up_state(p, TASK_FROZEN) if we know the task is already thawed. There is not possibility of time-of-compare/time-of-use race when we skip the wake_up_state because entering/exiting TASK_FROZEN is guarded by freezer_lock. Fixes: 8f0eed4a78a8 ("freezer,sched: Use saved_state to reduce some spurious wakeups") Signed-off-by: Elliot Berman Signed-off-by: Peter Zijlstra (Intel) Reviewed-by: Abhijeet Dharmapurikar Link: https://lore.kernel.org/r/20231120-freezer-state-multiple-thaws-v1-1-f2e1dd7ce5a2@quicinc.com --- kernel/freezer.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/freezer.c b/kernel/freezer.c index c450fa8b8b5e..759006a9a910 100644 --- a/kernel/freezer.c +++ b/kernel/freezer.c @@ -201,7 +201,7 @@ void __thaw_task(struct task_struct *p) if (WARN_ON_ONCE(freezing(p))) goto unlock; - if (task_call_func(p, __restore_freezer_state, NULL)) + if (!frozen(p) || task_call_func(p, __restore_freezer_state, NULL)) goto unlock; wake_up_state(p, TASK_FROZEN); -- cgit v1.2.3 From 382c27f4ed28f803b1f1473ac2d8db0afc795a1b Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Wed, 29 Nov 2023 15:24:52 +0100 Subject: perf: Fix perf_event_validate_size() Budimir noted that perf_event_validate_size() only checks the size of the newly added event, even though the sizes of all existing events can also change due to not all events having the same read_format. When we attach the new event, perf_group_attach(), we do re-compute the size for all events. Fixes: a723968c0ed3 ("perf: Fix u16 overflows") Reported-by: Budimir Markovic Signed-off-by: Peter Zijlstra (Intel) --- kernel/events/core.c | 61 ++++++++++++++++++++++++++++++++-------------------- 1 file changed, 38 insertions(+), 23 deletions(-) diff --git a/kernel/events/core.c b/kernel/events/core.c index b704d83a28b2..c9d123e13b57 100644 --- a/kernel/events/core.c +++ b/kernel/events/core.c @@ -1814,31 +1814,34 @@ static inline void perf_event__state_init(struct perf_event *event) PERF_EVENT_STATE_INACTIVE; } -static void __perf_event_read_size(struct perf_event *event, int nr_siblings) +static int __perf_event_read_size(u64 read_format, int nr_siblings) { int entry = sizeof(u64); /* value */ int size = 0; int nr = 1; - if (event->attr.read_format & PERF_FORMAT_TOTAL_TIME_ENABLED) + if (read_format & PERF_FORMAT_TOTAL_TIME_ENABLED) size += sizeof(u64); - if (event->attr.read_format & PERF_FORMAT_TOTAL_TIME_RUNNING) + if (read_format & PERF_FORMAT_TOTAL_TIME_RUNNING) size += sizeof(u64); - if (event->attr.read_format & PERF_FORMAT_ID) + if (read_format & PERF_FORMAT_ID) entry += sizeof(u64); - if (event->attr.read_format & PERF_FORMAT_LOST) + if (read_format & PERF_FORMAT_LOST) entry += sizeof(u64); - if (event->attr.read_format & PERF_FORMAT_GROUP) { + if (read_format & PERF_FORMAT_GROUP) { nr += nr_siblings; size += sizeof(u64); } - size += entry * nr; - event->read_size = size; + /* + * Since perf_event_validate_size() limits this to 16k and inhibits + * adding more siblings, this will never overflow. + */ + return size + nr * entry; } static void __perf_event_header_size(struct perf_event *event, u64 sample_type) @@ -1888,8 +1891,9 @@ static void __perf_event_header_size(struct perf_event *event, u64 sample_type) */ static void perf_event__header_size(struct perf_event *event) { - __perf_event_read_size(event, - event->group_leader->nr_siblings); + event->read_size = + __perf_event_read_size(event->attr.read_format, + event->group_leader->nr_siblings); __perf_event_header_size(event, event->attr.sample_type); } @@ -1920,24 +1924,35 @@ static void perf_event__id_header_size(struct perf_event *event) event->id_header_size = size; } +/* + * Check that adding an event to the group does not result in anybody + * overflowing the 64k event limit imposed by the output buffer. + * + * Specifically, check that the read_size for the event does not exceed 16k, + * read_size being the one term that grows with groups size. Since read_size + * depends on per-event read_format, also (re)check the existing events. + * + * This leaves 48k for the constant size fields and things like callchains, + * branch stacks and register sets. + */ static bool perf_event_validate_size(struct perf_event *event) { - /* - * The values computed here will be over-written when we actually - * attach the event. - */ - __perf_event_read_size(event, event->group_leader->nr_siblings + 1); - __perf_event_header_size(event, event->attr.sample_type & ~PERF_SAMPLE_READ); - perf_event__id_header_size(event); + struct perf_event *sibling, *group_leader = event->group_leader; - /* - * Sum the lot; should not exceed the 64k limit we have on records. - * Conservative limit to allow for callchains and other variable fields. - */ - if (event->read_size + event->header_size + - event->id_header_size + sizeof(struct perf_event_header) >= 16*1024) + if (__perf_event_read_size(event->attr.read_format, + group_leader->nr_siblings + 1) > 16*1024) return false; + if (__perf_event_read_size(group_leader->attr.read_format, + group_leader->nr_siblings + 1) > 16*1024) + return false; + + for_each_sibling_event(sibling, group_leader) { + if (__perf_event_read_size(sibling->attr.read_format, + group_leader->nr_siblings + 1) > 16*1024) + return false; + } + return true; } -- cgit v1.2.3 From fc1ccc16271a0526518f19f460fed63d575a8a42 Mon Sep 17 00:00:00 2001 From: xiazhengqiao Date: Wed, 29 Nov 2023 16:41:15 +0800 Subject: drm/panel: starry-2081101qfh032011-53g: Fine tune the panel power sequence For the "starry, 2081101qfh032011-53g" panel, it is stipulated in the panel spec that MIPI needs to keep the LP11 state before the lcm_reset pin is pulled high. Fixes: 6069b66cd962 ("drm/panel: support for STARRY 2081101QFH032011-53G MIPI-DSI panel") Signed-off-by: xiazhengqiao Reviewed-by: Jessica Zhang Link: https://lore.kernel.org/r/20231129084115.7918-1-xiazhengqiao@huaqin.corp-partner.google.com Signed-off-by: Neil Armstrong Link: https://patchwork.freedesktop.org/patch/msgid/20231129084115.7918-1-xiazhengqiao@huaqin.corp-partner.google.com --- drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c b/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c index be8f48e3c1db..c4c0f08e9202 100644 --- a/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c +++ b/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c @@ -1764,6 +1764,7 @@ static const struct panel_desc starry_qfh032011_53g_desc = { .mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_SYNC_PULSE | MIPI_DSI_MODE_LPM, .init_cmds = starry_qfh032011_53g_init_cmd, + .lp11_before_reset = true, }; static const struct drm_display_mode starry_himax83102_j02_default_mode = { -- cgit v1.2.3 From fb18fe0fdf22a2f4512a8b644bb5ea1473829cda Mon Sep 17 00:00:00 2001 From: Yang Yingliang Date: Wed, 29 Nov 2023 17:07:15 +0800 Subject: drm/panel: nt36523: fix return value check in nt36523_probe() mipi_dsi_device_register_full() never returns NULL pointer, it will return ERR_PTR() when it fails, so replace the check with IS_ERR(). Fixes: 0993234a0045 ("drm/panel: Add driver for Novatek NT36523") Signed-off-by: Yang Yingliang Reviewed-by: Neil Armstrong Link: https://lore.kernel.org/r/20231129090715.856263-1-yangyingliang@huaweicloud.com Signed-off-by: Neil Armstrong Link: https://patchwork.freedesktop.org/patch/msgid/20231129090715.856263-1-yangyingliang@huaweicloud.com --- drivers/gpu/drm/panel/panel-novatek-nt36523.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/panel/panel-novatek-nt36523.c b/drivers/gpu/drm/panel/panel-novatek-nt36523.c index 9b9a7eb1bc60..a189ce236328 100644 --- a/drivers/gpu/drm/panel/panel-novatek-nt36523.c +++ b/drivers/gpu/drm/panel/panel-novatek-nt36523.c @@ -1254,9 +1254,9 @@ static int nt36523_probe(struct mipi_dsi_device *dsi) return dev_err_probe(dev, -EPROBE_DEFER, "cannot get secondary DSI host\n"); pinfo->dsi[1] = mipi_dsi_device_register_full(dsi1_host, info); - if (!pinfo->dsi[1]) { + if (IS_ERR(pinfo->dsi[1])) { dev_err(dev, "cannot get secondary DSI device\n"); - return -ENODEV; + return PTR_ERR(pinfo->dsi[1]); } } -- cgit v1.2.3 From febab20caebac959fdc3d7520bc52de8b1184455 Mon Sep 17 00:00:00 2001 From: Wyes Karny Date: Fri, 17 Nov 2023 06:38:39 +0000 Subject: cpufreq/amd-pstate: Fix scaling_min_freq and scaling_max_freq update When amd_pstate is running, writing to scaling_min_freq and scaling_max_freq has no effect. These values are only passed to the policy level, but not to the platform level. This means that the platform does not know about the frequency limits set by the user. To fix this, update the min_perf and max_perf values at the platform level whenever the user changes the scaling_min_freq and scaling_max_freq values. Fixes: ffa5096a7c33 ("cpufreq: amd-pstate: implement Pstate EPP support for the AMD processors") Acked-by: Huang Rui Signed-off-by: Wyes Karny Signed-off-by: Rafael J. Wysocki --- drivers/cpufreq/amd-pstate.c | 60 ++++++++++++++++++++++++++++++++++---------- include/linux/amd-pstate.h | 4 +++ 2 files changed, 51 insertions(+), 13 deletions(-) diff --git a/drivers/cpufreq/amd-pstate.c b/drivers/cpufreq/amd-pstate.c index 300f81d36291..3313d1d2c6dd 100644 --- a/drivers/cpufreq/amd-pstate.c +++ b/drivers/cpufreq/amd-pstate.c @@ -307,11 +307,11 @@ static int pstate_init_perf(struct amd_cpudata *cpudata) highest_perf = AMD_CPPC_HIGHEST_PERF(cap1); WRITE_ONCE(cpudata->highest_perf, highest_perf); - + WRITE_ONCE(cpudata->max_limit_perf, highest_perf); WRITE_ONCE(cpudata->nominal_perf, AMD_CPPC_NOMINAL_PERF(cap1)); WRITE_ONCE(cpudata->lowest_nonlinear_perf, AMD_CPPC_LOWNONLIN_PERF(cap1)); WRITE_ONCE(cpudata->lowest_perf, AMD_CPPC_LOWEST_PERF(cap1)); - + WRITE_ONCE(cpudata->min_limit_perf, AMD_CPPC_LOWEST_PERF(cap1)); return 0; } @@ -329,11 +329,12 @@ static int cppc_init_perf(struct amd_cpudata *cpudata) highest_perf = cppc_perf.highest_perf; WRITE_ONCE(cpudata->highest_perf, highest_perf); - + WRITE_ONCE(cpudata->max_limit_perf, highest_perf); WRITE_ONCE(cpudata->nominal_perf, cppc_perf.nominal_perf); WRITE_ONCE(cpudata->lowest_nonlinear_perf, cppc_perf.lowest_nonlinear_perf); WRITE_ONCE(cpudata->lowest_perf, cppc_perf.lowest_perf); + WRITE_ONCE(cpudata->min_limit_perf, cppc_perf.lowest_perf); if (cppc_state == AMD_PSTATE_ACTIVE) return 0; @@ -432,6 +433,10 @@ static void amd_pstate_update(struct amd_cpudata *cpudata, u32 min_perf, u64 prev = READ_ONCE(cpudata->cppc_req_cached); u64 value = prev; + min_perf = clamp_t(unsigned long, min_perf, cpudata->min_limit_perf, + cpudata->max_limit_perf); + max_perf = clamp_t(unsigned long, max_perf, cpudata->min_limit_perf, + cpudata->max_limit_perf); des_perf = clamp_t(unsigned long, des_perf, min_perf, max_perf); if ((cppc_state == AMD_PSTATE_GUIDED) && (gov_flags & CPUFREQ_GOV_DYNAMIC_SWITCHING)) { @@ -470,6 +475,22 @@ static int amd_pstate_verify(struct cpufreq_policy_data *policy) return 0; } +static int amd_pstate_update_min_max_limit(struct cpufreq_policy *policy) +{ + u32 max_limit_perf, min_limit_perf; + struct amd_cpudata *cpudata = policy->driver_data; + + max_limit_perf = div_u64(policy->max * cpudata->highest_perf, cpudata->max_freq); + min_limit_perf = div_u64(policy->min * cpudata->highest_perf, cpudata->max_freq); + + WRITE_ONCE(cpudata->max_limit_perf, max_limit_perf); + WRITE_ONCE(cpudata->min_limit_perf, min_limit_perf); + WRITE_ONCE(cpudata->max_limit_freq, policy->max); + WRITE_ONCE(cpudata->min_limit_freq, policy->min); + + return 0; +} + static int amd_pstate_update_freq(struct cpufreq_policy *policy, unsigned int target_freq, bool fast_switch) { @@ -480,6 +501,9 @@ static int amd_pstate_update_freq(struct cpufreq_policy *policy, if (!cpudata->max_freq) return -ENODEV; + if (policy->min != cpudata->min_limit_freq || policy->max != cpudata->max_limit_freq) + amd_pstate_update_min_max_limit(policy); + cap_perf = READ_ONCE(cpudata->highest_perf); min_perf = READ_ONCE(cpudata->lowest_perf); max_perf = cap_perf; @@ -534,6 +558,10 @@ static void amd_pstate_adjust_perf(unsigned int cpu, struct amd_cpudata *cpudata = policy->driver_data; unsigned int target_freq; + if (policy->min != cpudata->min_limit_freq || policy->max != cpudata->max_limit_freq) + amd_pstate_update_min_max_limit(policy); + + cap_perf = READ_ONCE(cpudata->highest_perf); lowest_nonlinear_perf = READ_ONCE(cpudata->lowest_nonlinear_perf); max_freq = READ_ONCE(cpudata->max_freq); @@ -747,6 +775,8 @@ static int amd_pstate_cpu_init(struct cpufreq_policy *policy) /* Initial processor data capability frequencies */ cpudata->max_freq = max_freq; cpudata->min_freq = min_freq; + cpudata->max_limit_freq = max_freq; + cpudata->min_limit_freq = min_freq; cpudata->nominal_freq = nominal_freq; cpudata->lowest_nonlinear_freq = lowest_nonlinear_freq; @@ -1185,16 +1215,25 @@ static int amd_pstate_epp_cpu_exit(struct cpufreq_policy *policy) return 0; } -static void amd_pstate_epp_init(unsigned int cpu) +static void amd_pstate_epp_update_limit(struct cpufreq_policy *policy) { - struct cpufreq_policy *policy = cpufreq_cpu_get(cpu); struct amd_cpudata *cpudata = policy->driver_data; - u32 max_perf, min_perf; + u32 max_perf, min_perf, min_limit_perf, max_limit_perf; u64 value; s16 epp; max_perf = READ_ONCE(cpudata->highest_perf); min_perf = READ_ONCE(cpudata->lowest_perf); + max_limit_perf = div_u64(policy->max * cpudata->highest_perf, cpudata->max_freq); + min_limit_perf = div_u64(policy->min * cpudata->highest_perf, cpudata->max_freq); + + max_perf = clamp_t(unsigned long, max_perf, cpudata->min_limit_perf, + cpudata->max_limit_perf); + min_perf = clamp_t(unsigned long, min_perf, cpudata->min_limit_perf, + cpudata->max_limit_perf); + + WRITE_ONCE(cpudata->max_limit_perf, max_limit_perf); + WRITE_ONCE(cpudata->min_limit_perf, min_limit_perf); value = READ_ONCE(cpudata->cppc_req_cached); @@ -1212,9 +1251,6 @@ static void amd_pstate_epp_init(unsigned int cpu) value &= ~AMD_CPPC_DES_PERF(~0L); value |= AMD_CPPC_DES_PERF(0); - if (cpudata->epp_policy == cpudata->policy) - goto skip_epp; - cpudata->epp_policy = cpudata->policy; /* Get BIOS pre-defined epp value */ @@ -1224,7 +1260,7 @@ static void amd_pstate_epp_init(unsigned int cpu) * This return value can only be negative for shared_memory * systems where EPP register read/write not supported. */ - goto skip_epp; + return; } if (cpudata->policy == CPUFREQ_POLICY_PERFORMANCE) @@ -1238,8 +1274,6 @@ static void amd_pstate_epp_init(unsigned int cpu) WRITE_ONCE(cpudata->cppc_req_cached, value); amd_pstate_set_epp(cpudata, epp); -skip_epp: - cpufreq_cpu_put(policy); } static int amd_pstate_epp_set_policy(struct cpufreq_policy *policy) @@ -1254,7 +1288,7 @@ static int amd_pstate_epp_set_policy(struct cpufreq_policy *policy) cpudata->policy = policy->policy; - amd_pstate_epp_init(policy->cpu); + amd_pstate_epp_update_limit(policy); return 0; } diff --git a/include/linux/amd-pstate.h b/include/linux/amd-pstate.h index 446394f84606..6ad02ad9c7b4 100644 --- a/include/linux/amd-pstate.h +++ b/include/linux/amd-pstate.h @@ -70,6 +70,10 @@ struct amd_cpudata { u32 nominal_perf; u32 lowest_nonlinear_perf; u32 lowest_perf; + u32 min_limit_perf; + u32 max_limit_perf; + u32 min_limit_freq; + u32 max_limit_freq; u32 max_freq; u32 min_freq; -- cgit v1.2.3 From cbeb989e41f4094f54bec2cecce993f26f547bea Mon Sep 17 00:00:00 2001 From: Jakub Kicinski Date: Sun, 26 Nov 2023 14:58:06 -0800 Subject: ethtool: don't propagate EOPNOTSUPP from dumps The default dump handler needs to clear ret before returning. Otherwise if the last interface returns an inconsequential error this error will propagate to user space. This may confuse user space (ethtool CLI seems to ignore it, but YNL doesn't). It will also terminate the dump early for mutli-skb dump, because netlink core treats EOPNOTSUPP as a real error. Fixes: 728480f12442 ("ethtool: default handlers for GET requests") Reviewed-by: Simon Horman Link: https://lore.kernel.org/r/20231126225806.2143528-1-kuba@kernel.org Signed-off-by: Jakub Kicinski --- net/ethtool/netlink.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/ethtool/netlink.c b/net/ethtool/netlink.c index 3bbd5afb7b31..fe3553f60bf3 100644 --- a/net/ethtool/netlink.c +++ b/net/ethtool/netlink.c @@ -505,6 +505,7 @@ static int ethnl_default_dumpit(struct sk_buff *skb, ret = skb->len; break; } + ret = 0; } rtnl_unlock(); -- cgit v1.2.3 From 83f2df9d66bc9e1e0dbd5d5586a701088f6a1d42 Mon Sep 17 00:00:00 2001 From: Jakub Kicinski Date: Sun, 26 Nov 2023 14:58:58 -0800 Subject: tools: ynl-gen: always construct struct ynl_req_state struct ynl_req_state carries reply-related info from generated code into generic YNL code. While we don't need reply info to execute a request without a reply, we still need to pass in the struct, because it's also where we get the pointer to struct ynl_sock from. Passing NULL results in crashes if kernel returns an error or an unexpected reply. Fixes: dc0956c98f11 ("tools: ynl-gen: move the response reading logic into YNL") Link: https://lore.kernel.org/r/20231126225858.2144136-1-kuba@kernel.org Signed-off-by: Jakub Kicinski --- tools/net/ynl/generated/devlink-user.c | 87 +++++++++++++++++++++----------- tools/net/ynl/generated/ethtool-user.c | 51 ++++++++++++------- tools/net/ynl/generated/fou-user.c | 6 ++- tools/net/ynl/generated/handshake-user.c | 3 +- tools/net/ynl/ynl-gen-c.py | 10 ++-- 5 files changed, 102 insertions(+), 55 deletions(-) diff --git a/tools/net/ynl/generated/devlink-user.c b/tools/net/ynl/generated/devlink-user.c index c12ca87ca2bb..8e757e249dab 100644 --- a/tools/net/ynl/generated/devlink-user.c +++ b/tools/net/ynl/generated/devlink-user.c @@ -2399,6 +2399,7 @@ void devlink_port_set_req_free(struct devlink_port_set_req *req) int devlink_port_set(struct ynl_sock *ys, struct devlink_port_set_req *req) { + struct ynl_req_state yrs = { .yarg = { .ys = ys, }, }; struct nlmsghdr *nlh; int err; @@ -2416,7 +2417,7 @@ int devlink_port_set(struct ynl_sock *ys, struct devlink_port_set_req *req) if (req->_present.port_function) devlink_dl_port_function_put(nlh, DEVLINK_ATTR_PORT_FUNCTION, &req->port_function); - err = ynl_exec(ys, nlh, NULL); + err = ynl_exec(ys, nlh, &yrs); if (err < 0) return -1; @@ -2537,6 +2538,7 @@ void devlink_port_del_req_free(struct devlink_port_del_req *req) int devlink_port_del(struct ynl_sock *ys, struct devlink_port_del_req *req) { + struct ynl_req_state yrs = { .yarg = { .ys = ys, }, }; struct nlmsghdr *nlh; int err; @@ -2550,7 +2552,7 @@ int devlink_port_del(struct ynl_sock *ys, struct devlink_port_del_req *req) if (req->_present.port_index) mnl_attr_put_u32(nlh, DEVLINK_ATTR_PORT_INDEX, req->port_index); - err = ynl_exec(ys, nlh, NULL); + err = ynl_exec(ys, nlh, &yrs); if (err < 0) return -1; @@ -2568,6 +2570,7 @@ void devlink_port_split_req_free(struct devlink_port_split_req *req) int devlink_port_split(struct ynl_sock *ys, struct devlink_port_split_req *req) { + struct ynl_req_state yrs = { .yarg = { .ys = ys, }, }; struct nlmsghdr *nlh; int err; @@ -2583,7 +2586,7 @@ int devlink_port_split(struct ynl_sock *ys, struct devlink_port_split_req *req) if (req->_present.port_split_count) mnl_attr_put_u32(nlh, DEVLINK_ATTR_PORT_SPLIT_COUNT, req->port_split_count); - err = ynl_exec(ys, nlh, NULL); + err = ynl_exec(ys, nlh, &yrs); if (err < 0) return -1; @@ -2602,6 +2605,7 @@ void devlink_port_unsplit_req_free(struct devlink_port_unsplit_req *req) int devlink_port_unsplit(struct ynl_sock *ys, struct devlink_port_unsplit_req *req) { + struct ynl_req_state yrs = { .yarg = { .ys = ys, }, }; struct nlmsghdr *nlh; int err; @@ -2615,7 +2619,7 @@ int devlink_port_unsplit(struct ynl_sock *ys, if (req->_present.port_index) mnl_attr_put_u32(nlh, DEVLINK_ATTR_PORT_INDEX, req->port_index); - err = ynl_exec(ys, nlh, NULL); + err = ynl_exec(ys, nlh, &yrs); if (err < 0) return -1; @@ -2926,6 +2930,7 @@ void devlink_sb_pool_set_req_free(struct devlink_sb_pool_set_req *req) int devlink_sb_pool_set(struct ynl_sock *ys, struct devlink_sb_pool_set_req *req) { + struct ynl_req_state yrs = { .yarg = { .ys = ys, }, }; struct nlmsghdr *nlh; int err; @@ -2945,7 +2950,7 @@ int devlink_sb_pool_set(struct ynl_sock *ys, if (req->_present.sb_pool_size) mnl_attr_put_u32(nlh, DEVLINK_ATTR_SB_POOL_SIZE, req->sb_pool_size); - err = ynl_exec(ys, nlh, NULL); + err = ynl_exec(ys, nlh, &yrs); if (err < 0) return -1; @@ -3126,6 +3131,7 @@ devlink_sb_port_pool_set_req_free(struct devlink_sb_port_pool_set_req *req) int devlink_sb_port_pool_set(struct ynl_sock *ys, struct devlink_sb_port_pool_set_req *req) { + struct ynl_req_state yrs = { .yarg = { .ys = ys, }, }; struct nlmsghdr *nlh; int err; @@ -3145,7 +3151,7 @@ int devlink_sb_port_pool_set(struct ynl_sock *ys, if (req->_present.sb_threshold) mnl_attr_put_u32(nlh, DEVLINK_ATTR_SB_THRESHOLD, req->sb_threshold); - err = ynl_exec(ys, nlh, NULL); + err = ynl_exec(ys, nlh, &yrs); if (err < 0) return -1; @@ -3334,6 +3340,7 @@ devlink_sb_tc_pool_bind_set_req_free(struct devlink_sb_tc_pool_bind_set_req *req int devlink_sb_tc_pool_bind_set(struct ynl_sock *ys, struct devlink_sb_tc_pool_bind_set_req *req) { + struct ynl_req_state yrs = { .yarg = { .ys = ys, }, }; struct nlmsghdr *nlh; int err; @@ -3357,7 +3364,7 @@ int devlink_sb_tc_pool_bind_set(struct ynl_sock *ys, if (req->_present.sb_threshold) mnl_attr_put_u32(nlh, DEVLINK_ATTR_SB_THRESHOLD, req->sb_threshold); - err = ynl_exec(ys, nlh, NULL); + err = ynl_exec(ys, nlh, &yrs); if (err < 0) return -1; @@ -3376,6 +3383,7 @@ void devlink_sb_occ_snapshot_req_free(struct devlink_sb_occ_snapshot_req *req) int devlink_sb_occ_snapshot(struct ynl_sock *ys, struct devlink_sb_occ_snapshot_req *req) { + struct ynl_req_state yrs = { .yarg = { .ys = ys, }, }; struct nlmsghdr *nlh; int err; @@ -3389,7 +3397,7 @@ int devlink_sb_occ_snapshot(struct ynl_sock *ys, if (req->_present.sb_index) mnl_attr_put_u32(nlh, DEVLINK_ATTR_SB_INDEX, req->sb_index); - err = ynl_exec(ys, nlh, NULL); + err = ynl_exec(ys, nlh, &yrs); if (err < 0) return -1; @@ -3409,6 +3417,7 @@ devlink_sb_occ_max_clear_req_free(struct devlink_sb_occ_max_clear_req *req) int devlink_sb_occ_max_clear(struct ynl_sock *ys, struct devlink_sb_occ_max_clear_req *req) { + struct ynl_req_state yrs = { .yarg = { .ys = ys, }, }; struct nlmsghdr *nlh; int err; @@ -3422,7 +3431,7 @@ int devlink_sb_occ_max_clear(struct ynl_sock *ys, if (req->_present.sb_index) mnl_attr_put_u32(nlh, DEVLINK_ATTR_SB_INDEX, req->sb_index); - err = ynl_exec(ys, nlh, NULL); + err = ynl_exec(ys, nlh, &yrs); if (err < 0) return -1; @@ -3544,6 +3553,7 @@ void devlink_eswitch_set_req_free(struct devlink_eswitch_set_req *req) int devlink_eswitch_set(struct ynl_sock *ys, struct devlink_eswitch_set_req *req) { + struct ynl_req_state yrs = { .yarg = { .ys = ys, }, }; struct nlmsghdr *nlh; int err; @@ -3561,7 +3571,7 @@ int devlink_eswitch_set(struct ynl_sock *ys, if (req->_present.eswitch_encap_mode) mnl_attr_put_u8(nlh, DEVLINK_ATTR_ESWITCH_ENCAP_MODE, req->eswitch_encap_mode); - err = ynl_exec(ys, nlh, NULL); + err = ynl_exec(ys, nlh, &yrs); if (err < 0) return -1; @@ -3895,6 +3905,7 @@ devlink_dpipe_table_counters_set_req_free(struct devlink_dpipe_table_counters_se int devlink_dpipe_table_counters_set(struct ynl_sock *ys, struct devlink_dpipe_table_counters_set_req *req) { + struct ynl_req_state yrs = { .yarg = { .ys = ys, }, }; struct nlmsghdr *nlh; int err; @@ -3910,7 +3921,7 @@ int devlink_dpipe_table_counters_set(struct ynl_sock *ys, if (req->_present.dpipe_table_counters_enabled) mnl_attr_put_u8(nlh, DEVLINK_ATTR_DPIPE_TABLE_COUNTERS_ENABLED, req->dpipe_table_counters_enabled); - err = ynl_exec(ys, nlh, NULL); + err = ynl_exec(ys, nlh, &yrs); if (err < 0) return -1; @@ -3929,6 +3940,7 @@ void devlink_resource_set_req_free(struct devlink_resource_set_req *req) int devlink_resource_set(struct ynl_sock *ys, struct devlink_resource_set_req *req) { + struct ynl_req_state yrs = { .yarg = { .ys = ys, }, }; struct nlmsghdr *nlh; int err; @@ -3944,7 +3956,7 @@ int devlink_resource_set(struct ynl_sock *ys, if (req->_present.resource_size) mnl_attr_put_u64(nlh, DEVLINK_ATTR_RESOURCE_SIZE, req->resource_size); - err = ynl_exec(ys, nlh, NULL); + err = ynl_exec(ys, nlh, &yrs); if (err < 0) return -1; @@ -4319,6 +4331,7 @@ void devlink_param_set_req_free(struct devlink_param_set_req *req) int devlink_param_set(struct ynl_sock *ys, struct devlink_param_set_req *req) { + struct ynl_req_state yrs = { .yarg = { .ys = ys, }, }; struct nlmsghdr *nlh; int err; @@ -4336,7 +4349,7 @@ int devlink_param_set(struct ynl_sock *ys, struct devlink_param_set_req *req) if (req->_present.param_value_cmode) mnl_attr_put_u8(nlh, DEVLINK_ATTR_PARAM_VALUE_CMODE, req->param_value_cmode); - err = ynl_exec(ys, nlh, NULL); + err = ynl_exec(ys, nlh, &yrs); if (err < 0) return -1; @@ -4631,6 +4644,7 @@ void devlink_region_del_req_free(struct devlink_region_del_req *req) int devlink_region_del(struct ynl_sock *ys, struct devlink_region_del_req *req) { + struct ynl_req_state yrs = { .yarg = { .ys = ys, }, }; struct nlmsghdr *nlh; int err; @@ -4648,7 +4662,7 @@ int devlink_region_del(struct ynl_sock *ys, struct devlink_region_del_req *req) if (req->_present.region_snapshot_id) mnl_attr_put_u32(nlh, DEVLINK_ATTR_REGION_SNAPSHOT_ID, req->region_snapshot_id); - err = ynl_exec(ys, nlh, NULL); + err = ynl_exec(ys, nlh, &yrs); if (err < 0) return -1; @@ -4922,6 +4936,7 @@ void devlink_port_param_set_req_free(struct devlink_port_param_set_req *req) int devlink_port_param_set(struct ynl_sock *ys, struct devlink_port_param_set_req *req) { + struct ynl_req_state yrs = { .yarg = { .ys = ys, }, }; struct nlmsghdr *nlh; int err; @@ -4935,7 +4950,7 @@ int devlink_port_param_set(struct ynl_sock *ys, if (req->_present.port_index) mnl_attr_put_u32(nlh, DEVLINK_ATTR_PORT_INDEX, req->port_index); - err = ynl_exec(ys, nlh, NULL); + err = ynl_exec(ys, nlh, &yrs); if (err < 0) return -1; @@ -5360,6 +5375,7 @@ devlink_health_reporter_set_req_free(struct devlink_health_reporter_set_req *req int devlink_health_reporter_set(struct ynl_sock *ys, struct devlink_health_reporter_set_req *req) { + struct ynl_req_state yrs = { .yarg = { .ys = ys, }, }; struct nlmsghdr *nlh; int err; @@ -5381,7 +5397,7 @@ int devlink_health_reporter_set(struct ynl_sock *ys, if (req->_present.health_reporter_auto_dump) mnl_attr_put_u8(nlh, DEVLINK_ATTR_HEALTH_REPORTER_AUTO_DUMP, req->health_reporter_auto_dump); - err = ynl_exec(ys, nlh, NULL); + err = ynl_exec(ys, nlh, &yrs); if (err < 0) return -1; @@ -5402,6 +5418,7 @@ devlink_health_reporter_recover_req_free(struct devlink_health_reporter_recover_ int devlink_health_reporter_recover(struct ynl_sock *ys, struct devlink_health_reporter_recover_req *req) { + struct ynl_req_state yrs = { .yarg = { .ys = ys, }, }; struct nlmsghdr *nlh; int err; @@ -5417,7 +5434,7 @@ int devlink_health_reporter_recover(struct ynl_sock *ys, if (req->_present.health_reporter_name_len) mnl_attr_put_strz(nlh, DEVLINK_ATTR_HEALTH_REPORTER_NAME, req->health_reporter_name); - err = ynl_exec(ys, nlh, NULL); + err = ynl_exec(ys, nlh, &yrs); if (err < 0) return -1; @@ -5438,6 +5455,7 @@ devlink_health_reporter_diagnose_req_free(struct devlink_health_reporter_diagnos int devlink_health_reporter_diagnose(struct ynl_sock *ys, struct devlink_health_reporter_diagnose_req *req) { + struct ynl_req_state yrs = { .yarg = { .ys = ys, }, }; struct nlmsghdr *nlh; int err; @@ -5453,7 +5471,7 @@ int devlink_health_reporter_diagnose(struct ynl_sock *ys, if (req->_present.health_reporter_name_len) mnl_attr_put_strz(nlh, DEVLINK_ATTR_HEALTH_REPORTER_NAME, req->health_reporter_name); - err = ynl_exec(ys, nlh, NULL); + err = ynl_exec(ys, nlh, &yrs); if (err < 0) return -1; @@ -5556,6 +5574,7 @@ devlink_health_reporter_dump_clear_req_free(struct devlink_health_reporter_dump_ int devlink_health_reporter_dump_clear(struct ynl_sock *ys, struct devlink_health_reporter_dump_clear_req *req) { + struct ynl_req_state yrs = { .yarg = { .ys = ys, }, }; struct nlmsghdr *nlh; int err; @@ -5571,7 +5590,7 @@ int devlink_health_reporter_dump_clear(struct ynl_sock *ys, if (req->_present.health_reporter_name_len) mnl_attr_put_strz(nlh, DEVLINK_ATTR_HEALTH_REPORTER_NAME, req->health_reporter_name); - err = ynl_exec(ys, nlh, NULL); + err = ynl_exec(ys, nlh, &yrs); if (err < 0) return -1; @@ -5592,6 +5611,7 @@ void devlink_flash_update_req_free(struct devlink_flash_update_req *req) int devlink_flash_update(struct ynl_sock *ys, struct devlink_flash_update_req *req) { + struct ynl_req_state yrs = { .yarg = { .ys = ys, }, }; struct nlmsghdr *nlh; int err; @@ -5609,7 +5629,7 @@ int devlink_flash_update(struct ynl_sock *ys, if (req->_present.flash_update_overwrite_mask) mnl_attr_put(nlh, DEVLINK_ATTR_FLASH_UPDATE_OVERWRITE_MASK, sizeof(struct nla_bitfield32), &req->flash_update_overwrite_mask); - err = ynl_exec(ys, nlh, NULL); + err = ynl_exec(ys, nlh, &yrs); if (err < 0) return -1; @@ -5780,6 +5800,7 @@ void devlink_trap_set_req_free(struct devlink_trap_set_req *req) int devlink_trap_set(struct ynl_sock *ys, struct devlink_trap_set_req *req) { + struct ynl_req_state yrs = { .yarg = { .ys = ys, }, }; struct nlmsghdr *nlh; int err; @@ -5795,7 +5816,7 @@ int devlink_trap_set(struct ynl_sock *ys, struct devlink_trap_set_req *req) if (req->_present.trap_action) mnl_attr_put_u8(nlh, DEVLINK_ATTR_TRAP_ACTION, req->trap_action); - err = ynl_exec(ys, nlh, NULL); + err = ynl_exec(ys, nlh, &yrs); if (err < 0) return -1; @@ -5968,6 +5989,7 @@ void devlink_trap_group_set_req_free(struct devlink_trap_group_set_req *req) int devlink_trap_group_set(struct ynl_sock *ys, struct devlink_trap_group_set_req *req) { + struct ynl_req_state yrs = { .yarg = { .ys = ys, }, }; struct nlmsghdr *nlh; int err; @@ -5985,7 +6007,7 @@ int devlink_trap_group_set(struct ynl_sock *ys, if (req->_present.trap_policer_id) mnl_attr_put_u32(nlh, DEVLINK_ATTR_TRAP_POLICER_ID, req->trap_policer_id); - err = ynl_exec(ys, nlh, NULL); + err = ynl_exec(ys, nlh, &yrs); if (err < 0) return -1; @@ -6152,6 +6174,7 @@ devlink_trap_policer_set_req_free(struct devlink_trap_policer_set_req *req) int devlink_trap_policer_set(struct ynl_sock *ys, struct devlink_trap_policer_set_req *req) { + struct ynl_req_state yrs = { .yarg = { .ys = ys, }, }; struct nlmsghdr *nlh; int err; @@ -6169,7 +6192,7 @@ int devlink_trap_policer_set(struct ynl_sock *ys, if (req->_present.trap_policer_burst) mnl_attr_put_u64(nlh, DEVLINK_ATTR_TRAP_POLICER_BURST, req->trap_policer_burst); - err = ynl_exec(ys, nlh, NULL); + err = ynl_exec(ys, nlh, &yrs); if (err < 0) return -1; @@ -6190,6 +6213,7 @@ devlink_health_reporter_test_req_free(struct devlink_health_reporter_test_req *r int devlink_health_reporter_test(struct ynl_sock *ys, struct devlink_health_reporter_test_req *req) { + struct ynl_req_state yrs = { .yarg = { .ys = ys, }, }; struct nlmsghdr *nlh; int err; @@ -6205,7 +6229,7 @@ int devlink_health_reporter_test(struct ynl_sock *ys, if (req->_present.health_reporter_name_len) mnl_attr_put_strz(nlh, DEVLINK_ATTR_HEALTH_REPORTER_NAME, req->health_reporter_name); - err = ynl_exec(ys, nlh, NULL); + err = ynl_exec(ys, nlh, &yrs); if (err < 0) return -1; @@ -6384,6 +6408,7 @@ void devlink_rate_set_req_free(struct devlink_rate_set_req *req) int devlink_rate_set(struct ynl_sock *ys, struct devlink_rate_set_req *req) { + struct ynl_req_state yrs = { .yarg = { .ys = ys, }, }; struct nlmsghdr *nlh; int err; @@ -6407,7 +6432,7 @@ int devlink_rate_set(struct ynl_sock *ys, struct devlink_rate_set_req *req) if (req->_present.rate_parent_node_name_len) mnl_attr_put_strz(nlh, DEVLINK_ATTR_RATE_PARENT_NODE_NAME, req->rate_parent_node_name); - err = ynl_exec(ys, nlh, NULL); + err = ynl_exec(ys, nlh, &yrs); if (err < 0) return -1; @@ -6427,6 +6452,7 @@ void devlink_rate_new_req_free(struct devlink_rate_new_req *req) int devlink_rate_new(struct ynl_sock *ys, struct devlink_rate_new_req *req) { + struct ynl_req_state yrs = { .yarg = { .ys = ys, }, }; struct nlmsghdr *nlh; int err; @@ -6450,7 +6476,7 @@ int devlink_rate_new(struct ynl_sock *ys, struct devlink_rate_new_req *req) if (req->_present.rate_parent_node_name_len) mnl_attr_put_strz(nlh, DEVLINK_ATTR_RATE_PARENT_NODE_NAME, req->rate_parent_node_name); - err = ynl_exec(ys, nlh, NULL); + err = ynl_exec(ys, nlh, &yrs); if (err < 0) return -1; @@ -6469,6 +6495,7 @@ void devlink_rate_del_req_free(struct devlink_rate_del_req *req) int devlink_rate_del(struct ynl_sock *ys, struct devlink_rate_del_req *req) { + struct ynl_req_state yrs = { .yarg = { .ys = ys, }, }; struct nlmsghdr *nlh; int err; @@ -6482,7 +6509,7 @@ int devlink_rate_del(struct ynl_sock *ys, struct devlink_rate_del_req *req) if (req->_present.rate_node_name_len) mnl_attr_put_strz(nlh, DEVLINK_ATTR_RATE_NODE_NAME, req->rate_node_name); - err = ynl_exec(ys, nlh, NULL); + err = ynl_exec(ys, nlh, &yrs); if (err < 0) return -1; @@ -6645,6 +6672,7 @@ void devlink_linecard_set_req_free(struct devlink_linecard_set_req *req) int devlink_linecard_set(struct ynl_sock *ys, struct devlink_linecard_set_req *req) { + struct ynl_req_state yrs = { .yarg = { .ys = ys, }, }; struct nlmsghdr *nlh; int err; @@ -6660,7 +6688,7 @@ int devlink_linecard_set(struct ynl_sock *ys, if (req->_present.linecard_type_len) mnl_attr_put_strz(nlh, DEVLINK_ATTR_LINECARD_TYPE, req->linecard_type); - err = ynl_exec(ys, nlh, NULL); + err = ynl_exec(ys, nlh, &yrs); if (err < 0) return -1; @@ -6810,6 +6838,7 @@ void devlink_selftests_run_req_free(struct devlink_selftests_run_req *req) int devlink_selftests_run(struct ynl_sock *ys, struct devlink_selftests_run_req *req) { + struct ynl_req_state yrs = { .yarg = { .ys = ys, }, }; struct nlmsghdr *nlh; int err; @@ -6823,7 +6852,7 @@ int devlink_selftests_run(struct ynl_sock *ys, if (req->_present.selftests) devlink_dl_selftest_id_put(nlh, DEVLINK_ATTR_SELFTESTS, &req->selftests); - err = ynl_exec(ys, nlh, NULL); + err = ynl_exec(ys, nlh, &yrs); if (err < 0) return -1; diff --git a/tools/net/ynl/generated/ethtool-user.c b/tools/net/ynl/generated/ethtool-user.c index 74b883a14958..660435639e2b 100644 --- a/tools/net/ynl/generated/ethtool-user.c +++ b/tools/net/ynl/generated/ethtool-user.c @@ -1843,6 +1843,7 @@ void ethtool_linkinfo_set_req_free(struct ethtool_linkinfo_set_req *req) int ethtool_linkinfo_set(struct ynl_sock *ys, struct ethtool_linkinfo_set_req *req) { + struct ynl_req_state yrs = { .yarg = { .ys = ys, }, }; struct nlmsghdr *nlh; int err; @@ -1862,7 +1863,7 @@ int ethtool_linkinfo_set(struct ynl_sock *ys, if (req->_present.transceiver) mnl_attr_put_u8(nlh, ETHTOOL_A_LINKINFO_TRANSCEIVER, req->transceiver); - err = ynl_exec(ys, nlh, NULL); + err = ynl_exec(ys, nlh, &yrs); if (err < 0) return -1; @@ -2067,6 +2068,7 @@ void ethtool_linkmodes_set_req_free(struct ethtool_linkmodes_set_req *req) int ethtool_linkmodes_set(struct ynl_sock *ys, struct ethtool_linkmodes_set_req *req) { + struct ynl_req_state yrs = { .yarg = { .ys = ys, }, }; struct nlmsghdr *nlh; int err; @@ -2094,7 +2096,7 @@ int ethtool_linkmodes_set(struct ynl_sock *ys, if (req->_present.rate_matching) mnl_attr_put_u8(nlh, ETHTOOL_A_LINKMODES_RATE_MATCHING, req->rate_matching); - err = ynl_exec(ys, nlh, NULL); + err = ynl_exec(ys, nlh, &yrs); if (err < 0) return -1; @@ -2398,6 +2400,7 @@ void ethtool_debug_set_req_free(struct ethtool_debug_set_req *req) int ethtool_debug_set(struct ynl_sock *ys, struct ethtool_debug_set_req *req) { + struct ynl_req_state yrs = { .yarg = { .ys = ys, }, }; struct nlmsghdr *nlh; int err; @@ -2409,7 +2412,7 @@ int ethtool_debug_set(struct ynl_sock *ys, struct ethtool_debug_set_req *req) if (req->_present.msgmask) ethtool_bitset_put(nlh, ETHTOOL_A_DEBUG_MSGMASK, &req->msgmask); - err = ynl_exec(ys, nlh, NULL); + err = ynl_exec(ys, nlh, &yrs); if (err < 0) return -1; @@ -2577,6 +2580,7 @@ void ethtool_wol_set_req_free(struct ethtool_wol_set_req *req) int ethtool_wol_set(struct ynl_sock *ys, struct ethtool_wol_set_req *req) { + struct ynl_req_state yrs = { .yarg = { .ys = ys, }, }; struct nlmsghdr *nlh; int err; @@ -2590,7 +2594,7 @@ int ethtool_wol_set(struct ynl_sock *ys, struct ethtool_wol_set_req *req) if (req->_present.sopass_len) mnl_attr_put(nlh, ETHTOOL_A_WOL_SOPASS, req->_present.sopass_len, req->sopass); - err = ynl_exec(ys, nlh, NULL); + err = ynl_exec(ys, nlh, &yrs); if (err < 0) return -1; @@ -3045,6 +3049,7 @@ void ethtool_privflags_set_req_free(struct ethtool_privflags_set_req *req) int ethtool_privflags_set(struct ynl_sock *ys, struct ethtool_privflags_set_req *req) { + struct ynl_req_state yrs = { .yarg = { .ys = ys, }, }; struct nlmsghdr *nlh; int err; @@ -3056,7 +3061,7 @@ int ethtool_privflags_set(struct ynl_sock *ys, if (req->_present.flags) ethtool_bitset_put(nlh, ETHTOOL_A_PRIVFLAGS_FLAGS, &req->flags); - err = ynl_exec(ys, nlh, NULL); + err = ynl_exec(ys, nlh, &yrs); if (err < 0) return -1; @@ -3273,6 +3278,7 @@ void ethtool_rings_set_req_free(struct ethtool_rings_set_req *req) int ethtool_rings_set(struct ynl_sock *ys, struct ethtool_rings_set_req *req) { + struct ynl_req_state yrs = { .yarg = { .ys = ys, }, }; struct nlmsghdr *nlh; int err; @@ -3312,7 +3318,7 @@ int ethtool_rings_set(struct ynl_sock *ys, struct ethtool_rings_set_req *req) if (req->_present.tx_push_buf_len_max) mnl_attr_put_u32(nlh, ETHTOOL_A_RINGS_TX_PUSH_BUF_LEN_MAX, req->tx_push_buf_len_max); - err = ynl_exec(ys, nlh, NULL); + err = ynl_exec(ys, nlh, &yrs); if (err < 0) return -1; @@ -3495,6 +3501,7 @@ void ethtool_channels_set_req_free(struct ethtool_channels_set_req *req) int ethtool_channels_set(struct ynl_sock *ys, struct ethtool_channels_set_req *req) { + struct ynl_req_state yrs = { .yarg = { .ys = ys, }, }; struct nlmsghdr *nlh; int err; @@ -3520,7 +3527,7 @@ int ethtool_channels_set(struct ynl_sock *ys, if (req->_present.combined_count) mnl_attr_put_u32(nlh, ETHTOOL_A_CHANNELS_COMBINED_COUNT, req->combined_count); - err = ynl_exec(ys, nlh, NULL); + err = ynl_exec(ys, nlh, &yrs); if (err < 0) return -1; @@ -3798,6 +3805,7 @@ void ethtool_coalesce_set_req_free(struct ethtool_coalesce_set_req *req) int ethtool_coalesce_set(struct ynl_sock *ys, struct ethtool_coalesce_set_req *req) { + struct ynl_req_state yrs = { .yarg = { .ys = ys, }, }; struct nlmsghdr *nlh; int err; @@ -3861,7 +3869,7 @@ int ethtool_coalesce_set(struct ynl_sock *ys, if (req->_present.tx_aggr_time_usecs) mnl_attr_put_u32(nlh, ETHTOOL_A_COALESCE_TX_AGGR_TIME_USECS, req->tx_aggr_time_usecs); - err = ynl_exec(ys, nlh, NULL); + err = ynl_exec(ys, nlh, &yrs); if (err < 0) return -1; @@ -4036,6 +4044,7 @@ void ethtool_pause_set_req_free(struct ethtool_pause_set_req *req) int ethtool_pause_set(struct ynl_sock *ys, struct ethtool_pause_set_req *req) { + struct ynl_req_state yrs = { .yarg = { .ys = ys, }, }; struct nlmsghdr *nlh; int err; @@ -4055,7 +4064,7 @@ int ethtool_pause_set(struct ynl_sock *ys, struct ethtool_pause_set_req *req) if (req->_present.stats_src) mnl_attr_put_u32(nlh, ETHTOOL_A_PAUSE_STATS_SRC, req->stats_src); - err = ynl_exec(ys, nlh, NULL); + err = ynl_exec(ys, nlh, &yrs); if (err < 0) return -1; @@ -4242,6 +4251,7 @@ void ethtool_eee_set_req_free(struct ethtool_eee_set_req *req) int ethtool_eee_set(struct ynl_sock *ys, struct ethtool_eee_set_req *req) { + struct ynl_req_state yrs = { .yarg = { .ys = ys, }, }; struct nlmsghdr *nlh; int err; @@ -4263,7 +4273,7 @@ int ethtool_eee_set(struct ynl_sock *ys, struct ethtool_eee_set_req *req) if (req->_present.tx_lpi_timer) mnl_attr_put_u32(nlh, ETHTOOL_A_EEE_TX_LPI_TIMER, req->tx_lpi_timer); - err = ynl_exec(ys, nlh, NULL); + err = ynl_exec(ys, nlh, &yrs); if (err < 0) return -1; @@ -4437,6 +4447,7 @@ void ethtool_cable_test_act_req_free(struct ethtool_cable_test_act_req *req) int ethtool_cable_test_act(struct ynl_sock *ys, struct ethtool_cable_test_act_req *req) { + struct ynl_req_state yrs = { .yarg = { .ys = ys, }, }; struct nlmsghdr *nlh; int err; @@ -4446,7 +4457,7 @@ int ethtool_cable_test_act(struct ynl_sock *ys, if (req->_present.header) ethtool_header_put(nlh, ETHTOOL_A_CABLE_TEST_HEADER, &req->header); - err = ynl_exec(ys, nlh, NULL); + err = ynl_exec(ys, nlh, &yrs); if (err < 0) return -1; @@ -4465,6 +4476,7 @@ ethtool_cable_test_tdr_act_req_free(struct ethtool_cable_test_tdr_act_req *req) int ethtool_cable_test_tdr_act(struct ynl_sock *ys, struct ethtool_cable_test_tdr_act_req *req) { + struct ynl_req_state yrs = { .yarg = { .ys = ys, }, }; struct nlmsghdr *nlh; int err; @@ -4474,7 +4486,7 @@ int ethtool_cable_test_tdr_act(struct ynl_sock *ys, if (req->_present.header) ethtool_header_put(nlh, ETHTOOL_A_CABLE_TEST_TDR_HEADER, &req->header); - err = ynl_exec(ys, nlh, NULL); + err = ynl_exec(ys, nlh, &yrs); if (err < 0) return -1; @@ -4782,6 +4794,7 @@ void ethtool_fec_set_req_free(struct ethtool_fec_set_req *req) int ethtool_fec_set(struct ynl_sock *ys, struct ethtool_fec_set_req *req) { + struct ynl_req_state yrs = { .yarg = { .ys = ys, }, }; struct nlmsghdr *nlh; int err; @@ -4799,7 +4812,7 @@ int ethtool_fec_set(struct ynl_sock *ys, struct ethtool_fec_set_req *req) if (req->_present.stats) ethtool_fec_stat_put(nlh, ETHTOOL_A_FEC_STATS, &req->stats); - err = ynl_exec(ys, nlh, NULL); + err = ynl_exec(ys, nlh, &yrs); if (err < 0) return -1; @@ -5235,6 +5248,7 @@ void ethtool_module_set_req_free(struct ethtool_module_set_req *req) int ethtool_module_set(struct ynl_sock *ys, struct ethtool_module_set_req *req) { + struct ynl_req_state yrs = { .yarg = { .ys = ys, }, }; struct nlmsghdr *nlh; int err; @@ -5248,7 +5262,7 @@ int ethtool_module_set(struct ynl_sock *ys, struct ethtool_module_set_req *req) if (req->_present.power_mode) mnl_attr_put_u8(nlh, ETHTOOL_A_MODULE_POWER_MODE, req->power_mode); - err = ynl_exec(ys, nlh, NULL); + err = ynl_exec(ys, nlh, &yrs); if (err < 0) return -1; @@ -5397,6 +5411,7 @@ void ethtool_pse_set_req_free(struct ethtool_pse_set_req *req) int ethtool_pse_set(struct ynl_sock *ys, struct ethtool_pse_set_req *req) { + struct ynl_req_state yrs = { .yarg = { .ys = ys, }, }; struct nlmsghdr *nlh; int err; @@ -5412,7 +5427,7 @@ int ethtool_pse_set(struct ynl_sock *ys, struct ethtool_pse_set_req *req) if (req->_present.pw_d_status) mnl_attr_put_u32(nlh, ETHTOOL_A_PODL_PSE_PW_D_STATUS, req->pw_d_status); - err = ynl_exec(ys, nlh, NULL); + err = ynl_exec(ys, nlh, &yrs); if (err < 0) return -1; @@ -5746,6 +5761,7 @@ void ethtool_plca_set_cfg_req_free(struct ethtool_plca_set_cfg_req *req) int ethtool_plca_set_cfg(struct ynl_sock *ys, struct ethtool_plca_set_cfg_req *req) { + struct ynl_req_state yrs = { .yarg = { .ys = ys, }, }; struct nlmsghdr *nlh; int err; @@ -5771,7 +5787,7 @@ int ethtool_plca_set_cfg(struct ynl_sock *ys, if (req->_present.burst_tmr) mnl_attr_put_u32(nlh, ETHTOOL_A_PLCA_BURST_TMR, req->burst_tmr); - err = ynl_exec(ys, nlh, NULL); + err = ynl_exec(ys, nlh, &yrs); if (err < 0) return -1; @@ -6124,6 +6140,7 @@ void ethtool_mm_set_req_free(struct ethtool_mm_set_req *req) int ethtool_mm_set(struct ynl_sock *ys, struct ethtool_mm_set_req *req) { + struct ynl_req_state yrs = { .yarg = { .ys = ys, }, }; struct nlmsghdr *nlh; int err; @@ -6143,7 +6160,7 @@ int ethtool_mm_set(struct ynl_sock *ys, struct ethtool_mm_set_req *req) if (req->_present.tx_min_frag_size) mnl_attr_put_u32(nlh, ETHTOOL_A_MM_TX_MIN_FRAG_SIZE, req->tx_min_frag_size); - err = ynl_exec(ys, nlh, NULL); + err = ynl_exec(ys, nlh, &yrs); if (err < 0) return -1; diff --git a/tools/net/ynl/generated/fou-user.c b/tools/net/ynl/generated/fou-user.c index 4271b5d43c58..f30bef23bc31 100644 --- a/tools/net/ynl/generated/fou-user.c +++ b/tools/net/ynl/generated/fou-user.c @@ -72,6 +72,7 @@ void fou_add_req_free(struct fou_add_req *req) int fou_add(struct ynl_sock *ys, struct fou_add_req *req) { + struct ynl_req_state yrs = { .yarg = { .ys = ys, }, }; struct nlmsghdr *nlh; int err; @@ -99,7 +100,7 @@ int fou_add(struct ynl_sock *ys, struct fou_add_req *req) if (req->_present.ifindex) mnl_attr_put_u32(nlh, FOU_ATTR_IFINDEX, req->ifindex); - err = ynl_exec(ys, nlh, NULL); + err = ynl_exec(ys, nlh, &yrs); if (err < 0) return -1; @@ -117,6 +118,7 @@ void fou_del_req_free(struct fou_del_req *req) int fou_del(struct ynl_sock *ys, struct fou_del_req *req) { + struct ynl_req_state yrs = { .yarg = { .ys = ys, }, }; struct nlmsghdr *nlh; int err; @@ -140,7 +142,7 @@ int fou_del(struct ynl_sock *ys, struct fou_del_req *req) if (req->_present.peer_v6_len) mnl_attr_put(nlh, FOU_ATTR_PEER_V6, req->_present.peer_v6_len, req->peer_v6); - err = ynl_exec(ys, nlh, NULL); + err = ynl_exec(ys, nlh, &yrs); if (err < 0) return -1; diff --git a/tools/net/ynl/generated/handshake-user.c b/tools/net/ynl/generated/handshake-user.c index 7c67765daf90..6901f8462cca 100644 --- a/tools/net/ynl/generated/handshake-user.c +++ b/tools/net/ynl/generated/handshake-user.c @@ -295,6 +295,7 @@ void handshake_done_req_free(struct handshake_done_req *req) int handshake_done(struct ynl_sock *ys, struct handshake_done_req *req) { + struct ynl_req_state yrs = { .yarg = { .ys = ys, }, }; struct nlmsghdr *nlh; int err; @@ -308,7 +309,7 @@ int handshake_done(struct ynl_sock *ys, struct handshake_done_req *req) for (unsigned int i = 0; i < req->n_remote_auth; i++) mnl_attr_put_u32(nlh, HANDSHAKE_A_DONE_REMOTE_AUTH, req->remote_auth[i]); - err = ynl_exec(ys, nlh, NULL); + err = ynl_exec(ys, nlh, &yrs); if (err < 0) return -1; diff --git a/tools/net/ynl/ynl-gen-c.py b/tools/net/ynl/ynl-gen-c.py index 3bd6b928c14f..8337aa6de25e 100755 --- a/tools/net/ynl/ynl-gen-c.py +++ b/tools/net/ynl/ynl-gen-c.py @@ -1709,14 +1709,14 @@ def print_req(ri): ret_ok = '0' ret_err = '-1' direction = "request" - local_vars = ['struct nlmsghdr *nlh;', + local_vars = ['struct ynl_req_state yrs = { .yarg = { .ys = ys, }, };', + 'struct nlmsghdr *nlh;', 'int err;'] if 'reply' in ri.op[ri.op_mode]: ret_ok = 'rsp' ret_err = 'NULL' - local_vars += [f'{type_name(ri, rdir(direction))} *rsp;', - 'struct ynl_req_state yrs = { .yarg = { .ys = ys, }, };'] + local_vars += [f'{type_name(ri, rdir(direction))} *rsp;'] print_prototype(ri, direction, terminate=False) ri.cw.block_start() @@ -1732,7 +1732,6 @@ def print_req(ri): attr.attr_put(ri, "req") ri.cw.nl() - parse_arg = "NULL" if 'reply' in ri.op[ri.op_mode]: ri.cw.p('rsp = calloc(1, sizeof(*rsp));') ri.cw.p('yrs.yarg.data = rsp;') @@ -1742,8 +1741,7 @@ def print_req(ri): else: ri.cw.p(f'yrs.rsp_cmd = {ri.op.rsp_value};') ri.cw.nl() - parse_arg = '&yrs' - ri.cw.p(f"err = ynl_exec(ys, nlh, {parse_arg});") + ri.cw.p("err = ynl_exec(ys, nlh, &yrs);") ri.cw.p('if (err < 0)') if 'reply' in ri.op[ri.op_mode]: ri.cw.p('goto err_free;') -- cgit v1.2.3 From 3649ff0a0b152b5f00e8f56a5ce0da0945aae278 Mon Sep 17 00:00:00 2001 From: Bart Van Assche Date: Tue, 28 Nov 2023 11:40:19 -0800 Subject: block: Document the role of the two attribute groups It is nontrivial to derive the role of the two attribute groups in source file block/blk-sysfs.c. Hence add a comment that explains their roles. See also commit 6d85ebf95c44 ("blk-sysfs: add a new attr_group for blk_mq"). Cc: Christoph Hellwig Cc: Yu Kuai Signed-off-by: Bart Van Assche Link: https://lore.kernel.org/r/20231128194019.72762-1-bvanassche@acm.org Signed-off-by: Jens Axboe --- block/blk-sysfs.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/block/blk-sysfs.c b/block/blk-sysfs.c index 63e481262336..0b2d04766324 100644 --- a/block/blk-sysfs.c +++ b/block/blk-sysfs.c @@ -615,6 +615,7 @@ static ssize_t queue_wb_lat_store(struct request_queue *q, const char *page, QUEUE_RW_ENTRY(queue_wb_lat, "wbt_lat_usec"); #endif +/* Common attributes for bio-based and request-based queues. */ static struct attribute *queue_attrs[] = { &queue_ra_entry.attr, &queue_max_hw_sectors_entry.attr, @@ -659,6 +660,7 @@ static struct attribute *queue_attrs[] = { NULL, }; +/* Request-based queue attributes that are not relevant for bio-based queues. */ static struct attribute *blk_mq_queue_attrs[] = { &queue_requests_entry.attr, &elv_iosched_entry.attr, -- cgit v1.2.3 From 7be05bdfb4efc1396f7692562c7161e2b9f595f1 Mon Sep 17 00:00:00 2001 From: Wu Bo Date: Tue, 21 Nov 2023 20:51:49 -0700 Subject: dm verity: initialize fec io before freeing it If BIO error, verity_end_io() can call verity_finish_io() before verity_fec_init_io(). Therefore, fec_io->rs is not initialized and may crash when doing memory freeing in verity_fec_finish_io(). Crash call stack: die+0x90/0x2b8 __do_kernel_fault+0x260/0x298 do_bad_area+0x2c/0xdc do_translation_fault+0x3c/0x54 do_mem_abort+0x54/0x118 el1_abort+0x38/0x5c el1h_64_sync_handler+0x50/0x90 el1h_64_sync+0x64/0x6c free_rs+0x18/0xac fec_rs_free+0x10/0x24 mempool_free+0x58/0x148 verity_fec_finish_io+0x4c/0xb0 verity_end_io+0xb8/0x150 Cc: stable@vger.kernel.org # v6.0+ Fixes: 5721d4e5a9cd ("dm verity: Add optional "try_verify_in_tasklet" feature") Signed-off-by: Wu Bo Reviewed-by: Mikulas Patocka Signed-off-by: Mike Snitzer --- drivers/md/dm-verity-target.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/md/dm-verity-target.c b/drivers/md/dm-verity-target.c index e115fcfe723c..beec14b6b044 100644 --- a/drivers/md/dm-verity-target.c +++ b/drivers/md/dm-verity-target.c @@ -642,7 +642,6 @@ static void verity_work(struct work_struct *w) io->in_tasklet = false; - verity_fec_init_io(io); verity_finish_io(io, errno_to_blk_status(verity_verify_io(io))); } @@ -792,6 +791,8 @@ static int verity_map(struct dm_target *ti, struct bio *bio) bio->bi_private = io; io->iter = bio->bi_iter; + verity_fec_init_io(io); + verity_submit_prefetch(v, io); submit_bio_noacct(bio); -- cgit v1.2.3 From 0193e3966ceeeef69e235975918b287ab093082b Mon Sep 17 00:00:00 2001 From: Wu Bo Date: Tue, 21 Nov 2023 20:51:50 -0700 Subject: dm verity: don't perform FEC for failed readahead IO We found an issue under Android OTA scenario that many BIOs have to do FEC where the data under dm-verity is 100% complete and no corruption. Android OTA has many dm-block layers, from upper to lower: dm-verity dm-snapshot dm-origin & dm-cow dm-linear ufs DM tables have to change 2 times during Android OTA merging process. When doing table change, the dm-snapshot will be suspended for a while. During this interval, many readahead IOs are submitted to dm_verity from filesystem. Then the kverity works are busy doing FEC process which cost too much time to finish dm-verity IO. This causes needless delay which feels like system is hung. After adding debugging it was found that each readahead IO needed around 10s to finish when this situation occurred. This is due to IO amplification: dm-snapshot suspend erofs_readahead // 300+ io is submitted dm_submit_bio (dm_verity) dm_submit_bio (dm_snapshot) bio return EIO bio got nothing, it's empty verity_end_io verity_verify_io forloop range(0, io->n_blocks) // each io->nblocks ~= 20 verity_fec_decode fec_decode_rsb fec_read_bufs forloop range(0, v->fec->rsn) // v->fec->rsn = 253 new_read submit_bio (dm_snapshot) end loop end loop dm-snapshot resume Readahead BIOs get nothing while dm-snapshot is suspended, so all of them will cause verity's FEC. Each readahead BIO needs to verify ~20 (io->nblocks) blocks. Each block needs to do FEC, and every block needs to do 253 (v->fec->rsn) reads. So during the suspend interval(~200ms), 300 readahead BIOs trigger ~1518000 (300*20*253) IOs to dm-snapshot. As readahead IO is not required by userspace, and to fix this issue, it is best to pass readahead errors to upper layer to handle it. Cc: stable@vger.kernel.org Fixes: a739ff3f543a ("dm verity: add support for forward error correction") Signed-off-by: Wu Bo Reviewed-by: Mikulas Patocka Signed-off-by: Mike Snitzer --- drivers/md/dm-verity-target.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/md/dm-verity-target.c b/drivers/md/dm-verity-target.c index beec14b6b044..14e58ae70521 100644 --- a/drivers/md/dm-verity-target.c +++ b/drivers/md/dm-verity-target.c @@ -667,7 +667,9 @@ static void verity_end_io(struct bio *bio) struct dm_verity_io *io = bio->bi_private; if (bio->bi_status && - (!verity_fec_is_enabled(io->v) || verity_is_system_shutting_down())) { + (!verity_fec_is_enabled(io->v) || + verity_is_system_shutting_down() || + (bio->bi_opf & REQ_RAHEAD))) { verity_finish_io(io, bio->bi_status); return; } -- cgit v1.2.3 From 38bc1ab135db87577695816b190e7d6d8ec75879 Mon Sep 17 00:00:00 2001 From: Mikulas Patocka Date: Tue, 28 Nov 2023 14:50:23 +0100 Subject: dm-verity: align struct dm_verity_fec_io properly dm_verity_fec_io is placed after the end of two hash digests. If the hash digest has unaligned length, struct dm_verity_fec_io could be unaligned. This commit fixes the placement of struct dm_verity_fec_io, so that it's aligned. Signed-off-by: Mikulas Patocka Cc: stable@vger.kernel.org Fixes: a739ff3f543a ("dm verity: add support for forward error correction") Signed-off-by: Mike Snitzer --- drivers/md/dm-verity-fec.c | 3 ++- drivers/md/dm-verity.h | 6 ------ 2 files changed, 2 insertions(+), 7 deletions(-) diff --git a/drivers/md/dm-verity-fec.c b/drivers/md/dm-verity-fec.c index 2099c755119e..b475200d8586 100644 --- a/drivers/md/dm-verity-fec.c +++ b/drivers/md/dm-verity-fec.c @@ -24,7 +24,8 @@ bool verity_fec_is_enabled(struct dm_verity *v) */ static inline struct dm_verity_fec_io *fec_io(struct dm_verity_io *io) { - return (struct dm_verity_fec_io *) verity_io_digest_end(io->v, io); + return (struct dm_verity_fec_io *) + ((char *)io + io->v->ti->per_io_data_size - sizeof(struct dm_verity_fec_io)); } /* diff --git a/drivers/md/dm-verity.h b/drivers/md/dm-verity.h index f96f4e281ee4..f9d522c870e6 100644 --- a/drivers/md/dm-verity.h +++ b/drivers/md/dm-verity.h @@ -115,12 +115,6 @@ static inline u8 *verity_io_want_digest(struct dm_verity *v, return (u8 *)(io + 1) + v->ahash_reqsize + v->digest_size; } -static inline u8 *verity_io_digest_end(struct dm_verity *v, - struct dm_verity_io *io) -{ - return verity_io_want_digest(v, io) + v->digest_size; -} - extern int verity_for_bv_block(struct dm_verity *v, struct dm_verity_io *io, struct bvec_iter *iter, int (*process)(struct dm_verity *v, -- cgit v1.2.3 From 547c91929f437b42e6a9c90fec1fb5aec3e64aac Mon Sep 17 00:00:00 2001 From: Like Xu Date: Thu, 23 Nov 2023 15:58:18 +0800 Subject: KVM: x86: Get CPL directly when checking if loaded vCPU is in kernel mode When querying whether or not a vCPU "is" running in kernel mode, directly get the CPL if the vCPU is the currently loaded vCPU. In scenarios where a guest is profiled via perf-kvm, querying vcpu->arch.preempted_in_kernel from kvm_guest_state() is wrong if vCPU is actively running, i.e. isn't scheduled out due to being preempted and so preempted_in_kernel is stale. This affects perf/core's ability to accurately tag guest RIP with PERF_RECORD_MISC_GUEST_{KERNEL|USER} and record it in the sample. This causes perf/tool to fail to connect the vCPU RIPs to the guest kernel space symbols when parsing these samples due to incorrect PERF_RECORD_MISC flags: Before (perf-report of a cpu-cycles sample): 1.23% :58945 [unknown] [u] 0xffffffff818012e0 After: 1.35% :60703 [kernel.vmlinux] [g] asm_exc_page_fault Note, checking preempted_in_kernel in kvm_arch_vcpu_in_kernel() is awful as nothing in the API's suggests that it's safe to use if and only if the vCPU was preempted. That can be cleaned up in the future, for now just fix the glaring correctness bug. Note #2, checking vcpu->preempted is NOT safe, as getting the CPL on VMX requires VMREAD, i.e. is correct if and only if the vCPU is loaded. If the target vCPU *was* preempted, then it can be scheduled back in after the check on vcpu->preempted in kvm_vcpu_on_spin(), i.e. KVM could end up trying to do VMREAD on a VMCS that isn't loaded on the current pCPU. Signed-off-by: Like Xu Fixes: e1bfc24577cc ("KVM: Move x86's perf guest info callbacks to generic KVM") Link: https://lore.kernel.org/r/20231123075818.12521-1-likexu@tencent.com [sean: massage changelong, add Fixes] Signed-off-by: Sean Christopherson --- arch/x86/kvm/x86.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index 41cce5031126..3b6a0109191b 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -12910,7 +12910,10 @@ bool kvm_arch_vcpu_in_kernel(struct kvm_vcpu *vcpu) if (vcpu->arch.guest_state_protected) return true; - return vcpu->arch.preempted_in_kernel; + if (vcpu != kvm_get_running_vcpu()) + return vcpu->arch.preempted_in_kernel; + + return static_call(kvm_x86_get_cpl)(vcpu) == 0; } unsigned long kvm_arch_vcpu_get_ip(struct kvm_vcpu *vcpu) -- cgit v1.2.3 From 41e05548fa6b069a2b895cf4c7bd9ad618b21e2f Mon Sep 17 00:00:00 2001 From: Mikulas Patocka Date: Tue, 28 Nov 2023 14:48:06 +0100 Subject: dm-flakey: start allocating with MAX_ORDER Commit 23baf831a32c ("mm, treewide: redefine MAX_ORDER sanely") changed the meaning of MAX_ORDER from exclusive to inclusive. So, we can allocate compound pages with up to 1 << MAX_ORDER pages. Reflect this change in dm-flakey and start trying to allocate compound pages with MAX_ORDER. Signed-off-by: Mikulas Patocka Signed-off-by: Mike Snitzer --- drivers/md/dm-flakey.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/md/dm-flakey.c b/drivers/md/dm-flakey.c index 120153e44ae0..f57fb821528d 100644 --- a/drivers/md/dm-flakey.c +++ b/drivers/md/dm-flakey.c @@ -434,7 +434,7 @@ static struct bio *clone_bio(struct dm_target *ti, struct flakey_c *fc, struct b remaining_size = size; - order = MAX_ORDER - 1; + order = MAX_ORDER; while (remaining_size) { struct page *pages; unsigned size_to_add, to_copy; -- cgit v1.2.3 From 142c169b31beb364ef39385b4e88735bd51d37fe Mon Sep 17 00:00:00 2001 From: Ayush Jain Date: Fri, 3 Nov 2023 15:18:15 +0530 Subject: cpufreq/amd-pstate: Only print supported EPP values for performance governor show_energy_performance_available_preferences() to show only supported values which is performance in performance governor policy. -------Before-------- $ cat /sys/devices/system/cpu/cpu1/cpufreq/scaling_driver amd-pstate-epp $ cat /sys/devices/system/cpu/cpu1/cpufreq/scaling_governor performance $ cat /sys/devices/system/cpu/cpu1/cpufreq/energy_performance_preference performance $ cat /sys/devices/system/cpu/cpu1/cpufreq/energy_performance_available_preferences default performance balance_performance balance_power power -------After-------- $ cat /sys/devices/system/cpu/cpu1/cpufreq/scaling_driver amd-pstate-epp $ cat /sys/devices/system/cpu/cpu1/cpufreq/scaling_governor performance $ cat /sys/devices/system/cpu/cpu1/cpufreq/energy_performance_preference performance $ cat /sys/devices/system/cpu/cpu1/cpufreq/energy_performance_available_preferences performance Fixes: ffa5096a7c33 ("cpufreq: amd-pstate: implement Pstate EPP support for the AMD processors") Suggested-by: Wyes Karny Signed-off-by: Ayush Jain Reviewed-by: Wyes Karny Acked-by: Huang Rui Signed-off-by: Rafael J. Wysocki --- drivers/cpufreq/amd-pstate.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/cpufreq/amd-pstate.c b/drivers/cpufreq/amd-pstate.c index 3313d1d2c6dd..1f6186475715 100644 --- a/drivers/cpufreq/amd-pstate.c +++ b/drivers/cpufreq/amd-pstate.c @@ -882,11 +882,16 @@ static ssize_t show_energy_performance_available_preferences( { int i = 0; int offset = 0; + struct amd_cpudata *cpudata = policy->driver_data; + + if (cpudata->policy == CPUFREQ_POLICY_PERFORMANCE) + return sysfs_emit_at(buf, offset, "%s\n", + energy_perf_strings[EPP_INDEX_PERFORMANCE]); while (energy_perf_strings[i] != NULL) offset += sysfs_emit_at(buf, offset, "%s ", energy_perf_strings[i++]); - sysfs_emit_at(buf, offset, "\n"); + offset += sysfs_emit_at(buf, offset, "\n"); return offset; } -- cgit v1.2.3 From 3c9ea68cb61bd7e5bd312c06a12adada74ff5805 Mon Sep 17 00:00:00 2001 From: Alvin Lee Date: Mon, 6 Nov 2023 11:20:15 -0500 Subject: drm/amd/display: Include udelay when waiting for INBOX0 ACK When waiting for the ACK for INBOX0 message, we have to ensure to include the udelay for proper wait time Cc: stable@vger.kernel.org # 6.1+ Reviewed-by: Samson Tam Acked-by: Hamza Mahfooz Signed-off-by: Alvin Lee Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/dmub/src/dmub_srv.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpu/drm/amd/display/dmub/src/dmub_srv.c b/drivers/gpu/drm/amd/display/dmub/src/dmub_srv.c index 22fc4ba96def..38360adc53d9 100644 --- a/drivers/gpu/drm/amd/display/dmub/src/dmub_srv.c +++ b/drivers/gpu/drm/amd/display/dmub/src/dmub_srv.c @@ -1077,6 +1077,7 @@ enum dmub_status dmub_srv_wait_for_inbox0_ack(struct dmub_srv *dmub, uint32_t ti ack = dmub->hw_funcs.read_inbox0_ack_register(dmub); if (ack) return DMUB_STATUS_OK; + udelay(1); } return DMUB_STATUS_TIMEOUT; } -- cgit v1.2.3 From c95f12b7b724abee5e8c3727db066c63c0876db3 Mon Sep 17 00:00:00 2001 From: Nicholas Kazlauskas Date: Fri, 3 Nov 2023 10:01:01 -0400 Subject: drm/amd/display: Add z-state support policy for dcn35 [Why] DML2 means that the dcn3x policy for calculating z-state support no longer runs from validate_bandwidth. This means we are unconditionally allowing Z8, the hardware default. [How] Port the policy over to DCN35, but with a few modifications: - Don't use min_dst_y_next_start as a check for Z8/Z10 allow - Add support for overriding the Z10 stutter period per ASIC - Cleanup the code to make the policy assignment more clear Reviewed-by: Charlene Liu Acked-by: Hamza Mahfooz Signed-off-by: Nicholas Kazlauskas Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/dc/dc.h | 1 + .../gpu/drm/amd/display/dc/dcn35/dcn35_resource.c | 7 +++++ .../gpu/drm/amd/display/dc/dml/dcn35/dcn35_fpu.c | 34 ++++++++++++++++++++++ .../gpu/drm/amd/display/dc/dml/dcn35/dcn35_fpu.h | 2 ++ 4 files changed, 44 insertions(+) diff --git a/drivers/gpu/drm/amd/display/dc/dc.h b/drivers/gpu/drm/amd/display/dc/dc.h index 9316b737a8ba..c4e5c3350b75 100644 --- a/drivers/gpu/drm/amd/display/dc/dc.h +++ b/drivers/gpu/drm/amd/display/dc/dc.h @@ -874,6 +874,7 @@ struct dc_debug_options { unsigned int seamless_boot_odm_combine; unsigned int force_odm_combine_4to1; //bit vector based on otg inst int minimum_z8_residency_time; + int minimum_z10_residency_time; bool disable_z9_mpc; unsigned int force_fclk_khz; bool enable_tri_buf; diff --git a/drivers/gpu/drm/amd/display/dc/dcn35/dcn35_resource.c b/drivers/gpu/drm/amd/display/dc/dcn35/dcn35_resource.c index c7e011d26d41..8f1a9c959bb5 100644 --- a/drivers/gpu/drm/amd/display/dc/dcn35/dcn35_resource.c +++ b/drivers/gpu/drm/amd/display/dc/dcn35/dcn35_resource.c @@ -1712,6 +1712,13 @@ static bool dcn35_validate_bandwidth(struct dc *dc, out = dml2_validate(dc, context, fast_validate); + if (fast_validate) + return out; + + DC_FP_START(); + dcn35_decide_zstate_support(dc, context); + DC_FP_END(); + return out; } diff --git a/drivers/gpu/drm/amd/display/dc/dml/dcn35/dcn35_fpu.c b/drivers/gpu/drm/amd/display/dc/dml/dcn35/dcn35_fpu.c index a5fe523668e9..dee80429fc4c 100644 --- a/drivers/gpu/drm/amd/display/dc/dml/dcn35/dcn35_fpu.c +++ b/drivers/gpu/drm/amd/display/dc/dml/dcn35/dcn35_fpu.c @@ -507,3 +507,37 @@ int dcn35_populate_dml_pipes_from_context_fpu(struct dc *dc, return pipe_cnt; } + +void dcn35_decide_zstate_support(struct dc *dc, struct dc_state *context) +{ + enum dcn_zstate_support_state support = DCN_ZSTATE_SUPPORT_DISALLOW; + unsigned int i, plane_count = 0; + + for (i = 0; i < dc->res_pool->pipe_count; i++) { + if (context->res_ctx.pipe_ctx[i].plane_state) + plane_count++; + } + + if (plane_count == 0) { + support = DCN_ZSTATE_SUPPORT_ALLOW; + } else if (plane_count == 1 && context->stream_count == 1 && context->streams[0]->signal == SIGNAL_TYPE_EDP) { + struct dc_link *link = context->streams[0]->sink->link; + bool is_pwrseq0 = link && link->link_index == 0; + bool is_psr1 = link && link->psr_settings.psr_version == DC_PSR_VERSION_1 && !link->panel_config.psr.disable_psr; + int minmum_z8_residency = + dc->debug.minimum_z8_residency_time > 0 ? dc->debug.minimum_z8_residency_time : 1000; + bool allow_z8 = context->bw_ctx.dml.vba.StutterPeriod > (double)minmum_z8_residency; + int minmum_z10_residency = + dc->debug.minimum_z10_residency_time > 0 ? dc->debug.minimum_z10_residency_time : 5000; + bool allow_z10 = context->bw_ctx.dml.vba.StutterPeriod > (double)minmum_z10_residency; + + if (is_pwrseq0 && allow_z10) + support = DCN_ZSTATE_SUPPORT_ALLOW; + else if (is_pwrseq0 && is_psr1) + support = allow_z8 ? DCN_ZSTATE_SUPPORT_ALLOW_Z8_Z10_ONLY : DCN_ZSTATE_SUPPORT_ALLOW_Z10_ONLY; + else if (allow_z8) + support = DCN_ZSTATE_SUPPORT_ALLOW_Z8_ONLY; + } + + context->bw_ctx.bw.dcn.clk.zstate_support = support; +} diff --git a/drivers/gpu/drm/amd/display/dc/dml/dcn35/dcn35_fpu.h b/drivers/gpu/drm/amd/display/dc/dml/dcn35/dcn35_fpu.h index e8d5a170893e..067480fc3691 100644 --- a/drivers/gpu/drm/amd/display/dc/dml/dcn35/dcn35_fpu.h +++ b/drivers/gpu/drm/amd/display/dc/dml/dcn35/dcn35_fpu.h @@ -39,4 +39,6 @@ int dcn35_populate_dml_pipes_from_context_fpu(struct dc *dc, display_e2e_pipe_params_st *pipes, bool fast_validate); +void dcn35_decide_zstate_support(struct dc *dc, struct dc_state *context); + #endif -- cgit v1.2.3 From b9eab9e0aad3285651040e8ab86f64f6c4e51956 Mon Sep 17 00:00:00 2001 From: Jonathan Kim Date: Thu, 16 Nov 2023 13:57:07 -0500 Subject: drm/amdgpu: update xgmi num links info post gc9.4.2 GC IP 9.4.2 and up support TA reporting of the number of xGMI links between peers. Tested-by: Vignesh Chander Signed-off-by: Jonathan Kim Reviewed-by: Mukul Joshi Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd.c index b8412202a1b0..75dc58470393 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd.c @@ -547,7 +547,7 @@ int amdgpu_amdkfd_get_xgmi_bandwidth_mbytes(struct amdgpu_device *dst, struct amdgpu_device *adev = dst, *peer_adev; int num_links; - if (adev->asic_type != CHIP_ALDEBARAN) + if (amdgpu_ip_version(adev, GC_HWIP, 0) < IP_VERSION(9, 4, 2)) return 0; if (src) -- cgit v1.2.3 From fdf84f10e2b08b6e3cbfc672e5dd2cebf4317dea Mon Sep 17 00:00:00 2001 From: Nicholas Kazlauskas Date: Mon, 6 Nov 2023 17:29:33 -0500 Subject: drm/amd/display: Update DCN35 watermarks [Why & How] Update to the new values per HW team request. Affects both stutter and z8. Reviewed-by: Charlene Liu Acked-by: Hamza Mahfooz Signed-off-by: Nicholas Kazlauskas Signed-off-by: Alex Deucher --- .../amd/display/dc/clk_mgr/dcn35/dcn35_clk_mgr.c | 32 +++++++++++----------- .../gpu/drm/amd/display/dc/dml/dcn35/dcn35_fpu.c | 8 +++--- 2 files changed, 20 insertions(+), 20 deletions(-) diff --git a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn35/dcn35_clk_mgr.c b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn35/dcn35_clk_mgr.c index 507a7cf56711..3469f692d6ea 100644 --- a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn35/dcn35_clk_mgr.c +++ b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn35/dcn35_clk_mgr.c @@ -443,32 +443,32 @@ static struct wm_table ddr5_wm_table = { .wm_inst = WM_A, .wm_type = WM_TYPE_PSTATE_CHG, .pstate_latency_us = 11.72, - .sr_exit_time_us = 9, - .sr_enter_plus_exit_time_us = 11, + .sr_exit_time_us = 14.0, + .sr_enter_plus_exit_time_us = 16.0, .valid = true, }, { .wm_inst = WM_B, .wm_type = WM_TYPE_PSTATE_CHG, .pstate_latency_us = 11.72, - .sr_exit_time_us = 9, - .sr_enter_plus_exit_time_us = 11, + .sr_exit_time_us = 14.0, + .sr_enter_plus_exit_time_us = 16.0, .valid = true, }, { .wm_inst = WM_C, .wm_type = WM_TYPE_PSTATE_CHG, .pstate_latency_us = 11.72, - .sr_exit_time_us = 9, - .sr_enter_plus_exit_time_us = 11, + .sr_exit_time_us = 14.0, + .sr_enter_plus_exit_time_us = 16.0, .valid = true, }, { .wm_inst = WM_D, .wm_type = WM_TYPE_PSTATE_CHG, .pstate_latency_us = 11.72, - .sr_exit_time_us = 9, - .sr_enter_plus_exit_time_us = 11, + .sr_exit_time_us = 14.0, + .sr_enter_plus_exit_time_us = 16.0, .valid = true, }, } @@ -480,32 +480,32 @@ static struct wm_table lpddr5_wm_table = { .wm_inst = WM_A, .wm_type = WM_TYPE_PSTATE_CHG, .pstate_latency_us = 11.65333, - .sr_exit_time_us = 11.5, - .sr_enter_plus_exit_time_us = 14.5, + .sr_exit_time_us = 14.0, + .sr_enter_plus_exit_time_us = 16.0, .valid = true, }, { .wm_inst = WM_B, .wm_type = WM_TYPE_PSTATE_CHG, .pstate_latency_us = 11.65333, - .sr_exit_time_us = 11.5, - .sr_enter_plus_exit_time_us = 14.5, + .sr_exit_time_us = 14.0, + .sr_enter_plus_exit_time_us = 16.0, .valid = true, }, { .wm_inst = WM_C, .wm_type = WM_TYPE_PSTATE_CHG, .pstate_latency_us = 11.65333, - .sr_exit_time_us = 11.5, - .sr_enter_plus_exit_time_us = 14.5, + .sr_exit_time_us = 14.0, + .sr_enter_plus_exit_time_us = 16.0, .valid = true, }, { .wm_inst = WM_D, .wm_type = WM_TYPE_PSTATE_CHG, .pstate_latency_us = 11.65333, - .sr_exit_time_us = 11.5, - .sr_enter_plus_exit_time_us = 14.5, + .sr_exit_time_us = 14.0, + .sr_enter_plus_exit_time_us = 16.0, .valid = true, }, } diff --git a/drivers/gpu/drm/amd/display/dc/dml/dcn35/dcn35_fpu.c b/drivers/gpu/drm/amd/display/dc/dml/dcn35/dcn35_fpu.c index dee80429fc4c..30d78ad91b9c 100644 --- a/drivers/gpu/drm/amd/display/dc/dml/dcn35/dcn35_fpu.c +++ b/drivers/gpu/drm/amd/display/dc/dml/dcn35/dcn35_fpu.c @@ -164,10 +164,10 @@ struct _vcs_dpi_soc_bounding_box_st dcn3_5_soc = { }, }, .num_states = 5, - .sr_exit_time_us = 9.0, - .sr_enter_plus_exit_time_us = 11.0, - .sr_exit_z8_time_us = 50.0, /*changed from 442.0*/ - .sr_enter_plus_exit_z8_time_us = 50.0,/*changed from 560.0*/ + .sr_exit_time_us = 14.0, + .sr_enter_plus_exit_time_us = 16.0, + .sr_exit_z8_time_us = 525.0, + .sr_enter_plus_exit_z8_time_us = 715.0, .fclk_change_latency_us = 20.0, .usr_retraining_latency_us = 2, .writeback_latency_us = 12.0, -- cgit v1.2.3 From dc9b0c2af004fe7d9d7b67015fadcb0a7123c740 Mon Sep 17 00:00:00 2001 From: Wenjing Liu Date: Mon, 6 Nov 2023 16:47:19 -0500 Subject: drm/amd/display: fix a pipe mapping error in dcn32_fpu [why] In dcn32 DML pipes are ordered the same as dc pipes but only for used pipes. For example, if dc pipe 1 and 2 are used, their dml pipe indices would be 0 and 1 respectively. However update_pipe_slice_table_with_split_flags doesn't skip indices for free pipes. This causes us to not reference correct dml pipe output when building pipe topology. [how] Use two variables to iterate dc and dml pipes respectively and only increment dml pipe index when current dc pipe is not free. Cc: stable@vger.kernel.org # 6.1+ Reviewed-by: Chaitanya Dhere Acked-by: Hamza Mahfooz Signed-off-by: Wenjing Liu Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c | 20 ++++++++++++-------- 1 file changed, 12 insertions(+), 8 deletions(-) diff --git a/drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c b/drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c index 9ec4172d1c2d..44b0666e53b0 100644 --- a/drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c +++ b/drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c @@ -1192,13 +1192,16 @@ static bool update_pipe_slice_table_with_split_flags( */ struct pipe_ctx *pipe; bool odm; - int i; + int dc_pipe_idx, dml_pipe_idx = 0; bool updated = false; - for (i = 0; i < dc->res_pool->pipe_count; i++) { - pipe = &context->res_ctx.pipe_ctx[i]; + for (dc_pipe_idx = 0; + dc_pipe_idx < dc->res_pool->pipe_count; dc_pipe_idx++) { + pipe = &context->res_ctx.pipe_ctx[dc_pipe_idx]; + if (resource_is_pipe_type(pipe, FREE_PIPE)) + continue; - if (merge[i]) { + if (merge[dc_pipe_idx]) { if (resource_is_pipe_type(pipe, OPP_HEAD)) /* merging OPP head means reducing ODM slice * count by 1 @@ -1213,17 +1216,18 @@ static bool update_pipe_slice_table_with_split_flags( updated = true; } - if (split[i]) { - odm = vba->ODMCombineEnabled[vba->pipe_plane[i]] != + if (split[dc_pipe_idx]) { + odm = vba->ODMCombineEnabled[vba->pipe_plane[dml_pipe_idx]] != dm_odm_combine_mode_disabled; if (odm && resource_is_pipe_type(pipe, OPP_HEAD)) update_slice_table_for_stream( - table, pipe->stream, split[i] - 1); + table, pipe->stream, split[dc_pipe_idx] - 1); else if (!odm && resource_is_pipe_type(pipe, DPP_PIPE)) update_slice_table_for_plane(table, pipe, - pipe->plane_state, split[i] - 1); + pipe->plane_state, split[dc_pipe_idx] - 1); updated = true; } + dml_pipe_idx++; } return updated; } -- cgit v1.2.3 From 8c4e9105b2a8ab4ac4e6eeb479951ba6a3b4e897 Mon Sep 17 00:00:00 2001 From: Perry Yuan Date: Tue, 1 Aug 2023 10:37:41 -0400 Subject: drm/amdgpu: optimize RLC powerdown notification on Vangogh The smu needs to get the rlc power down message to sync the rlc state with smu, the rlc state updating message need to be sent at while smu begin suspend sequence , otherwise SMU will crash while RLC state is not notified by driver, and rlc state probally changed after that notification, so it needs to notify rlc state to smu at the end of the suspend sequence in amdgpu_device_suspend() that can make sure the rlc state is correctly set to SMU. [ 101.000590] amdgpu 0000:03:00.0: amdgpu: SMU: I'm not done with your previous command: SMN_C2PMSG_66:0x0000001E SMN_C2PMSG_82:0x00000000 [ 101.000598] amdgpu 0000:03:00.0: amdgpu: Failed to disable gfxoff! [ 110.838026] amdgpu 0000:03:00.0: amdgpu: SMU: I'm not done with your previous command: SMN_C2PMSG_66:0x0000001E SMN_C2PMSG_82:0x00000000 [ 110.838035] amdgpu 0000:03:00.0: amdgpu: Failed to disable smu features. [ 110.838039] amdgpu 0000:03:00.0: amdgpu: Fail to disable dpm features! [ 110.838040] [drm:amdgpu_device_ip_suspend_phase2 [amdgpu]] *ERROR* suspend of IP block failed -62 [ 110.884394] PM: suspend of devices aborted after 21213.620 msecs [ 110.884402] PM: start suspend of devices aborted after 21213.882 msecs [ 110.884405] PM: Some devices failed to suspend, or early wake event detected Reviewed-by: Yifan Zhang Signed-off-by: Perry Yuan Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu_device.c | 4 ++++ drivers/gpu/drm/amd/include/kgd_pp_interface.h | 1 + drivers/gpu/drm/amd/pm/amdgpu_dpm.c | 18 ++++++++++++++++++ drivers/gpu/drm/amd/pm/inc/amdgpu_dpm.h | 2 ++ drivers/gpu/drm/amd/pm/swsmu/amdgpu_smu.c | 10 ++++++++++ drivers/gpu/drm/amd/pm/swsmu/inc/amdgpu_smu.h | 5 +++++ drivers/gpu/drm/amd/pm/swsmu/smu11/vangogh_ppt.c | 5 ++--- drivers/gpu/drm/amd/pm/swsmu/smu_internal.h | 1 + 8 files changed, 43 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c index 7eeaf0aa7f81..5c0817cbc7c2 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c @@ -4538,6 +4538,10 @@ int amdgpu_device_suspend(struct drm_device *dev, bool fbcon) if (amdgpu_sriov_vf(adev)) amdgpu_virt_release_full_gpu(adev, false); + r = amdgpu_dpm_notify_rlc_state(adev, false); + if (r) + return r; + return 0; } diff --git a/drivers/gpu/drm/amd/include/kgd_pp_interface.h b/drivers/gpu/drm/amd/include/kgd_pp_interface.h index cd3c40a86029..0d1209f2cf31 100644 --- a/drivers/gpu/drm/amd/include/kgd_pp_interface.h +++ b/drivers/gpu/drm/amd/include/kgd_pp_interface.h @@ -444,6 +444,7 @@ struct amd_pm_funcs { struct dpm_clocks *clock_table); int (*get_smu_prv_buf_details)(void *handle, void **addr, size_t *size); void (*pm_compute_clocks)(void *handle); + int (*notify_rlc_state)(void *handle, bool en); }; struct metrics_table_header { diff --git a/drivers/gpu/drm/amd/pm/amdgpu_dpm.c b/drivers/gpu/drm/amd/pm/amdgpu_dpm.c index 08cb79401410..8ec11da0319f 100644 --- a/drivers/gpu/drm/amd/pm/amdgpu_dpm.c +++ b/drivers/gpu/drm/amd/pm/amdgpu_dpm.c @@ -181,6 +181,24 @@ int amdgpu_dpm_set_mp1_state(struct amdgpu_device *adev, return ret; } +int amdgpu_dpm_notify_rlc_state(struct amdgpu_device *adev, bool en) +{ + int ret = 0; + const struct amd_pm_funcs *pp_funcs = adev->powerplay.pp_funcs; + + if (pp_funcs && pp_funcs->notify_rlc_state) { + mutex_lock(&adev->pm.mutex); + + ret = pp_funcs->notify_rlc_state( + adev->powerplay.pp_handle, + en); + + mutex_unlock(&adev->pm.mutex); + } + + return ret; +} + bool amdgpu_dpm_is_baco_supported(struct amdgpu_device *adev) { const struct amd_pm_funcs *pp_funcs = adev->powerplay.pp_funcs; diff --git a/drivers/gpu/drm/amd/pm/inc/amdgpu_dpm.h b/drivers/gpu/drm/amd/pm/inc/amdgpu_dpm.h index feccd2a7120d..482ea30147ab 100644 --- a/drivers/gpu/drm/amd/pm/inc/amdgpu_dpm.h +++ b/drivers/gpu/drm/amd/pm/inc/amdgpu_dpm.h @@ -415,6 +415,8 @@ int amdgpu_dpm_mode1_reset(struct amdgpu_device *adev); int amdgpu_dpm_set_mp1_state(struct amdgpu_device *adev, enum pp_mp1_state mp1_state); +int amdgpu_dpm_notify_rlc_state(struct amdgpu_device *adev, bool en); + int amdgpu_dpm_set_gfx_power_up_by_imu(struct amdgpu_device *adev); int amdgpu_dpm_baco_exit(struct amdgpu_device *adev); diff --git a/drivers/gpu/drm/amd/pm/swsmu/amdgpu_smu.c b/drivers/gpu/drm/amd/pm/swsmu/amdgpu_smu.c index 1ead323f1c78..e1a5ee911dbb 100644 --- a/drivers/gpu/drm/amd/pm/swsmu/amdgpu_smu.c +++ b/drivers/gpu/drm/amd/pm/swsmu/amdgpu_smu.c @@ -1710,6 +1710,16 @@ static int smu_disable_dpms(struct smu_context *smu) } } + /* Notify SMU RLC is going to be off, stop RLC and SMU interaction. + * otherwise SMU will hang while interacting with RLC if RLC is halted + * this is a WA for Vangogh asic which fix the SMU hang issue. + */ + ret = smu_notify_rlc_state(smu, false); + if (ret) { + dev_err(adev->dev, "Fail to notify rlc status!\n"); + return ret; + } + if (amdgpu_ip_version(adev, GC_HWIP, 0) >= IP_VERSION(9, 4, 2) && !((adev->flags & AMD_IS_APU) && adev->gfx.imu.funcs) && !amdgpu_sriov_vf(adev) && adev->gfx.rlc.funcs->stop) diff --git a/drivers/gpu/drm/amd/pm/swsmu/inc/amdgpu_smu.h b/drivers/gpu/drm/amd/pm/swsmu/inc/amdgpu_smu.h index 8def291b18bc..23fa71cafb14 100644 --- a/drivers/gpu/drm/amd/pm/swsmu/inc/amdgpu_smu.h +++ b/drivers/gpu/drm/amd/pm/swsmu/inc/amdgpu_smu.h @@ -1360,6 +1360,11 @@ struct pptable_funcs { * management. */ int (*dpm_set_umsch_mm_enable)(struct smu_context *smu, bool enable); + + /** + * @notify_rlc_state: Notify RLC power state to SMU. + */ + int (*notify_rlc_state)(struct smu_context *smu, bool en); }; typedef enum { diff --git a/drivers/gpu/drm/amd/pm/swsmu/smu11/vangogh_ppt.c b/drivers/gpu/drm/amd/pm/swsmu/smu11/vangogh_ppt.c index 762b31455a0b..2ff6deedef95 100644 --- a/drivers/gpu/drm/amd/pm/swsmu/smu11/vangogh_ppt.c +++ b/drivers/gpu/drm/amd/pm/swsmu/smu11/vangogh_ppt.c @@ -2193,8 +2193,7 @@ static int vangogh_get_dpm_clock_table(struct smu_context *smu, struct dpm_clock return 0; } - -static int vangogh_system_features_control(struct smu_context *smu, bool en) +static int vangogh_notify_rlc_state(struct smu_context *smu, bool en) { struct amdgpu_device *adev = smu->adev; int ret = 0; @@ -2523,7 +2522,7 @@ static const struct pptable_funcs vangogh_ppt_funcs = { .print_clk_levels = vangogh_common_print_clk_levels, .set_default_dpm_table = vangogh_set_default_dpm_tables, .set_fine_grain_gfx_freq_parameters = vangogh_set_fine_grain_gfx_freq_parameters, - .system_features_control = vangogh_system_features_control, + .notify_rlc_state = vangogh_notify_rlc_state, .feature_is_enabled = smu_cmn_feature_is_enabled, .set_power_profile_mode = vangogh_set_power_profile_mode, .get_power_profile_mode = vangogh_get_power_profile_mode, diff --git a/drivers/gpu/drm/amd/pm/swsmu/smu_internal.h b/drivers/gpu/drm/amd/pm/swsmu/smu_internal.h index 80b3c3efc006..64766ac69c53 100644 --- a/drivers/gpu/drm/amd/pm/swsmu/smu_internal.h +++ b/drivers/gpu/drm/amd/pm/swsmu/smu_internal.h @@ -97,6 +97,7 @@ #define smu_get_default_config_table_settings(smu, config_table) smu_ppt_funcs(get_default_config_table_settings, -EOPNOTSUPP, smu, config_table) #define smu_set_config_table(smu, config_table) smu_ppt_funcs(set_config_table, -EOPNOTSUPP, smu, config_table) #define smu_init_pptable_microcode(smu) smu_ppt_funcs(init_pptable_microcode, 0, smu) +#define smu_notify_rlc_state(smu, en) smu_ppt_funcs(notify_rlc_state, 0, smu, en) #endif #endif -- cgit v1.2.3 From 0652a1c8a4a434a9766ca6bc52487c907df1864d Mon Sep 17 00:00:00 2001 From: Nicholas Kazlauskas Date: Tue, 7 Nov 2023 11:12:45 -0500 Subject: drm/amd/display: Add Z8 watermarks for DML2 bbox overrides [Why] We can override SR watermarks but not Z8 ones. [How] Add new parameters for Z8 matching the SR ones and feed them into the states. These also weren't being applied to every state, so make sure that we loop over and update all SOC states if given an override. Reviewed-by: Jun Lei Acked-by: Hamza Mahfooz Signed-off-by: Nicholas Kazlauskas Signed-off-by: Alex Deucher --- .../amd/display/dc/dml2/dml2_translation_helper.c | 47 +++++++++++++++------- drivers/gpu/drm/amd/display/dc/dml2/dml2_wrapper.h | 2 + 2 files changed, 34 insertions(+), 15 deletions(-) diff --git a/drivers/gpu/drm/amd/display/dc/dml2/dml2_translation_helper.c b/drivers/gpu/drm/amd/display/dc/dml2/dml2_translation_helper.c index 75171bee6f71..2b9638c6d9b0 100644 --- a/drivers/gpu/drm/amd/display/dc/dml2/dml2_translation_helper.c +++ b/drivers/gpu/drm/amd/display/dc/dml2/dml2_translation_helper.c @@ -341,25 +341,42 @@ void dml2_init_soc_states(struct dml2_context *dml2, const struct dc *in_dc, break; } - /* Override from passed values, mainly for debugging purposes, if available */ - if (dml2->config.bbox_overrides.sr_exit_latency_us) { - p->in_states->state_array[0].sr_exit_time_us = dml2->config.bbox_overrides.sr_exit_latency_us; - } + /* Override from passed values, if available */ + for (i = 0; i < p->in_states->num_states; i++) { + if (dml2->config.bbox_overrides.sr_exit_latency_us) { + p->in_states->state_array[i].sr_exit_time_us = + dml2->config.bbox_overrides.sr_exit_latency_us; + } - if (dml2->config.bbox_overrides.sr_enter_plus_exit_latency_us) { - p->in_states->state_array[0].sr_enter_plus_exit_time_us = dml2->config.bbox_overrides.sr_enter_plus_exit_latency_us; - } + if (dml2->config.bbox_overrides.sr_enter_plus_exit_latency_us) { + p->in_states->state_array[i].sr_enter_plus_exit_time_us = + dml2->config.bbox_overrides.sr_enter_plus_exit_latency_us; + } - if (dml2->config.bbox_overrides.urgent_latency_us) { - p->in_states->state_array[0].urgent_latency_pixel_data_only_us = dml2->config.bbox_overrides.urgent_latency_us; - } + if (dml2->config.bbox_overrides.sr_exit_z8_time_us) { + p->in_states->state_array[i].sr_exit_z8_time_us = + dml2->config.bbox_overrides.sr_exit_z8_time_us; + } - if (dml2->config.bbox_overrides.dram_clock_change_latency_us) { - p->in_states->state_array[0].dram_clock_change_latency_us = dml2->config.bbox_overrides.dram_clock_change_latency_us; - } + if (dml2->config.bbox_overrides.sr_enter_plus_exit_z8_time_us) { + p->in_states->state_array[i].sr_enter_plus_exit_z8_time_us = + dml2->config.bbox_overrides.sr_enter_plus_exit_z8_time_us; + } + + if (dml2->config.bbox_overrides.urgent_latency_us) { + p->in_states->state_array[i].urgent_latency_pixel_data_only_us = + dml2->config.bbox_overrides.urgent_latency_us; + } - if (dml2->config.bbox_overrides.fclk_change_latency_us) { - p->in_states->state_array[0].fclk_change_latency_us = dml2->config.bbox_overrides.fclk_change_latency_us; + if (dml2->config.bbox_overrides.dram_clock_change_latency_us) { + p->in_states->state_array[i].dram_clock_change_latency_us = + dml2->config.bbox_overrides.dram_clock_change_latency_us; + } + + if (dml2->config.bbox_overrides.fclk_change_latency_us) { + p->in_states->state_array[i].fclk_change_latency_us = + dml2->config.bbox_overrides.fclk_change_latency_us; + } } /* DCFCLK stas values are project specific */ diff --git a/drivers/gpu/drm/amd/display/dc/dml2/dml2_wrapper.h b/drivers/gpu/drm/amd/display/dc/dml2/dml2_wrapper.h index 317f90776d97..fe15baa4bf09 100644 --- a/drivers/gpu/drm/amd/display/dc/dml2/dml2_wrapper.h +++ b/drivers/gpu/drm/amd/display/dc/dml2/dml2_wrapper.h @@ -139,6 +139,8 @@ struct dml2_soc_bbox_overrides { double urgent_latency_us; double sr_exit_latency_us; double sr_enter_plus_exit_latency_us; + double sr_exit_z8_time_us; + double sr_enter_plus_exit_z8_time_us; double dram_clock_change_latency_us; double fclk_change_latency_us; unsigned int dram_num_chan; -- cgit v1.2.3 From 884e9b0827e889a8742e203ccd052101fb0b945d Mon Sep 17 00:00:00 2001 From: Hawking Zhang Date: Mon, 20 Nov 2023 10:14:21 +0800 Subject: drm/amdgpu: Do not issue gpu reset from nbio v7_9 bif interrupt In nbio v7_9, host driver should not issu gpu reset Signed-off-by: Hawking Zhang Reviewed-by: Stanley Yang Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/nbio_v7_9.c | 5 ----- 1 file changed, 5 deletions(-) diff --git a/drivers/gpu/drm/amd/amdgpu/nbio_v7_9.c b/drivers/gpu/drm/amd/amdgpu/nbio_v7_9.c index 23f26f8caad4..25a3da83e0fb 100644 --- a/drivers/gpu/drm/amd/amdgpu/nbio_v7_9.c +++ b/drivers/gpu/drm/amd/amdgpu/nbio_v7_9.c @@ -611,11 +611,6 @@ static void nbio_v7_9_handle_ras_controller_intr_no_bifring(struct amdgpu_device dev_info(adev->dev, "RAS controller interrupt triggered " "by NBIF error\n"); - - /* ras_controller_int is dedicated for nbif ras error, - * not the global interrupt for sync flood - */ - amdgpu_ras_reset_gpu(adev); } amdgpu_ras_error_data_fini(&err_data); -- cgit v1.2.3 From 4b27a33c3b173bef1d19ba89e0b9b812b4fddd25 Mon Sep 17 00:00:00 2001 From: Alex Sierra Date: Mon, 20 Nov 2023 11:31:32 -0600 Subject: drm/amdgpu: Force order between a read and write to the same address Setting register to force ordering to prevent read/write or write/read hazards for un-cached modes. Signed-off-by: Alex Sierra Acked-by: Alex Deucher Reviewed-by: Felix Kuehling Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org # 6.1.x --- drivers/gpu/drm/amd/amdgpu/gfx_v11_0.c | 8 ++++++++ drivers/gpu/drm/amd/include/asic_reg/gc/gc_11_0_0_offset.h | 2 ++ 2 files changed, 10 insertions(+) diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v11_0.c b/drivers/gpu/drm/amd/amdgpu/gfx_v11_0.c index 0c6133cc5e57..40ce12323164 100644 --- a/drivers/gpu/drm/amd/amdgpu/gfx_v11_0.c +++ b/drivers/gpu/drm/amd/amdgpu/gfx_v11_0.c @@ -89,6 +89,10 @@ MODULE_FIRMWARE("amdgpu/gc_11_5_0_me.bin"); MODULE_FIRMWARE("amdgpu/gc_11_5_0_mec.bin"); MODULE_FIRMWARE("amdgpu/gc_11_5_0_rlc.bin"); +static const struct soc15_reg_golden golden_settings_gc_11_0[] = { + SOC15_REG_GOLDEN_VALUE(GC, 0, regTCP_CNTL, 0x20000000, 0x20000000) +}; + static const struct soc15_reg_golden golden_settings_gc_11_0_1[] = { SOC15_REG_GOLDEN_VALUE(GC, 0, regCGTT_GS_NGG_CLK_CTRL, 0x9fff8fff, 0x00000010), @@ -304,6 +308,10 @@ static void gfx_v11_0_init_golden_registers(struct amdgpu_device *adev) default: break; } + soc15_program_register_sequence(adev, + golden_settings_gc_11_0, + (const u32)ARRAY_SIZE(golden_settings_gc_11_0)); + } static void gfx_v11_0_write_data_to_reg(struct amdgpu_ring *ring, int eng_sel, diff --git a/drivers/gpu/drm/amd/include/asic_reg/gc/gc_11_0_0_offset.h b/drivers/gpu/drm/amd/include/asic_reg/gc/gc_11_0_0_offset.h index c92c4b83253f..4bff1ef8a9a6 100644 --- a/drivers/gpu/drm/amd/include/asic_reg/gc/gc_11_0_0_offset.h +++ b/drivers/gpu/drm/amd/include/asic_reg/gc/gc_11_0_0_offset.h @@ -6369,6 +6369,8 @@ #define regTCP_INVALIDATE_BASE_IDX 1 #define regTCP_STATUS 0x19a1 #define regTCP_STATUS_BASE_IDX 1 +#define regTCP_CNTL 0x19a2 +#define regTCP_CNTL_BASE_IDX 1 #define regTCP_CNTL2 0x19a3 #define regTCP_CNTL2_BASE_IDX 1 #define regTCP_DEBUG_INDEX 0x19a5 -- cgit v1.2.3 From cab667a87133d409ff18913fd53c2324803ea8d2 Mon Sep 17 00:00:00 2001 From: Nicholas Kazlauskas Date: Tue, 7 Nov 2023 11:15:16 -0500 Subject: drm/amd/display: Feed SR and Z8 watermarks into DML2 for DCN35 [Why] We've updated the table but the values aren't being reflected in DML2 calculation. [How] Pass them into the bbox overrides. Reviewed-by: Jun Lei Acked-by: Hamza Mahfooz Signed-off-by: Nicholas Kazlauskas Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/dc/dml/dcn35/dcn35_fpu.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/drivers/gpu/drm/amd/display/dc/dml/dcn35/dcn35_fpu.c b/drivers/gpu/drm/amd/display/dc/dml/dcn35/dcn35_fpu.c index 30d78ad91b9c..21c17d3296a3 100644 --- a/drivers/gpu/drm/amd/display/dc/dml/dcn35/dcn35_fpu.c +++ b/drivers/gpu/drm/amd/display/dc/dml/dcn35/dcn35_fpu.c @@ -329,6 +329,15 @@ void dcn35_update_bw_bounding_box_fpu(struct dc *dc, /*temp till dml2 fully work without dml1*/ dml_init_instance(&dc->dml, &dcn3_5_soc, &dcn3_5_ip, DML_PROJECT_DCN31); + + /* Update latency values */ + dc->dml2_options.bbox_overrides.dram_clock_change_latency_us = dcn3_5_soc.dram_clock_change_latency_us; + + dc->dml2_options.bbox_overrides.sr_exit_latency_us = dcn3_5_soc.sr_exit_time_us; + dc->dml2_options.bbox_overrides.sr_enter_plus_exit_latency_us = dcn3_5_soc.sr_enter_plus_exit_time_us; + + dc->dml2_options.bbox_overrides.sr_exit_z8_time_us = dcn3_5_soc.sr_exit_z8_time_us; + dc->dml2_options.bbox_overrides.sr_enter_plus_exit_z8_time_us = dcn3_5_soc.sr_enter_plus_exit_z8_time_us; } static bool is_dual_plane(enum surface_pixel_format format) -- cgit v1.2.3 From 6f395cebdd8927fbffdc3a55a14fcacf93634359 Mon Sep 17 00:00:00 2001 From: Ilya Bakoulin Date: Tue, 7 Nov 2023 15:07:56 -0500 Subject: drm/amd/display: Fix MPCC 1DLUT programming [Why] Wrong function is used to translate LUT values to HW format, leading to visible artifacting in some cases. [How] Use the correct cm3_helper function. Cc: stable@vger.kernel.org # 6.1+ Reviewed-by: Krunoslav Kovac Acked-by: Hamza Mahfooz Signed-off-by: Ilya Bakoulin Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/dc/hwss/dcn32/dcn32_hwseq.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/amd/display/dc/hwss/dcn32/dcn32_hwseq.c b/drivers/gpu/drm/amd/display/dc/hwss/dcn32/dcn32_hwseq.c index 6a65af8c36b9..5f7f474ef51c 100644 --- a/drivers/gpu/drm/amd/display/dc/hwss/dcn32/dcn32_hwseq.c +++ b/drivers/gpu/drm/amd/display/dc/hwss/dcn32/dcn32_hwseq.c @@ -487,8 +487,7 @@ bool dcn32_set_mcm_luts( if (plane_state->blend_tf->type == TF_TYPE_HWPWL) lut_params = &plane_state->blend_tf->pwl; else if (plane_state->blend_tf->type == TF_TYPE_DISTRIBUTED_POINTS) { - cm_helper_translate_curve_to_hw_format(plane_state->ctx, - plane_state->blend_tf, + cm3_helper_translate_curve_to_hw_format(plane_state->blend_tf, &dpp_base->regamma_params, false); lut_params = &dpp_base->regamma_params; } @@ -503,8 +502,7 @@ bool dcn32_set_mcm_luts( else if (plane_state->in_shaper_func->type == TF_TYPE_DISTRIBUTED_POINTS) { // TODO: dpp_base replace ASSERT(false); - cm_helper_translate_curve_to_hw_format(plane_state->ctx, - plane_state->in_shaper_func, + cm3_helper_translate_curve_to_hw_format(plane_state->in_shaper_func, &dpp_base->shaper_params, true); lut_params = &dpp_base->shaper_params; } -- cgit v1.2.3 From 9be601135ba8ac69880c01606c82140f2dde105e Mon Sep 17 00:00:00 2001 From: Alvin Lee Date: Tue, 7 Nov 2023 17:01:49 -0500 Subject: drm/amd/display: Use DRAM speed from validation for dummy p-state [Description] When choosing which dummy p-state latency to use, we need to use the DRAM speed from validation. The DRAMSpeed DML variable can change because we use different input params to DML when populating watermarks set B. Cc: stable@vger.kernel.org # 6.1+ Reviewed-by: Samson Tam Acked-by: Hamza Mahfooz Signed-off-by: Alvin Lee Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c b/drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c index 44b0666e53b0..b46cde525066 100644 --- a/drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c +++ b/drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c @@ -2235,6 +2235,7 @@ void dcn32_calculate_wm_and_dlg_fpu(struct dc *dc, struct dc_state *context, int i, pipe_idx, vlevel_temp = 0; double dcfclk = dcn3_2_soc.clock_limits[0].dcfclk_mhz; double dcfclk_from_validation = context->bw_ctx.dml.vba.DCFCLKState[vlevel][context->bw_ctx.dml.vba.maxMpcComb]; + double dram_speed_from_validation = context->bw_ctx.dml.vba.DRAMSpeed; double dcfclk_from_fw_based_mclk_switching = dcfclk_from_validation; bool pstate_en = context->bw_ctx.dml.vba.DRAMClockChangeSupport[vlevel][context->bw_ctx.dml.vba.maxMpcComb] != dm_dram_clock_change_unsupported; @@ -2422,7 +2423,7 @@ void dcn32_calculate_wm_and_dlg_fpu(struct dc *dc, struct dc_state *context, } if (dc->clk_mgr->bw_params->wm_table.nv_entries[WM_C].valid) { - min_dram_speed_mts = context->bw_ctx.dml.vba.DRAMSpeed; + min_dram_speed_mts = dram_speed_from_validation; min_dram_speed_mts_margin = 160; context->bw_ctx.dml.soc.dram_clock_change_latency_us = -- cgit v1.2.3 From 9976421f8cb26e22b611ad7036c8b26340dcce25 Mon Sep 17 00:00:00 2001 From: Michael Strauss Date: Fri, 27 Oct 2023 14:12:51 -0400 Subject: drm/amd/display: Do not read DPREFCLK spread info from LUT on DCN35 [WHY] Currently DCN35 does not spread DPREFCLK [HOW] Remove hardcoded table with nonzero caps Reviewed-by: Nicholas Kazlauskas Acked-by: Hamza Mahfooz Signed-off-by: Michael Strauss Signed-off-by: Alex Deucher --- .../amd/display/dc/clk_mgr/dcn35/dcn35_clk_mgr.c | 22 ---------------------- 1 file changed, 22 deletions(-) diff --git a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn35/dcn35_clk_mgr.c b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn35/dcn35_clk_mgr.c index 3469f692d6ea..0f3f6a9d5144 100644 --- a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn35/dcn35_clk_mgr.c +++ b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn35/dcn35_clk_mgr.c @@ -515,11 +515,6 @@ static DpmClocks_t_dcn35 dummy_clocks; static struct dcn35_watermarks dummy_wms = { 0 }; -static struct dcn35_ss_info_table ss_info_table = { - .ss_divider = 1000, - .ss_percentage = {0, 0, 375, 375, 375} -}; - static void dcn35_build_watermark_ranges(struct clk_bw_params *bw_params, struct dcn35_watermarks *table) { int i, num_valid_sets; @@ -965,21 +960,6 @@ struct clk_mgr_funcs dcn35_fpga_funcs = { .get_dtb_ref_clk_frequency = dcn31_get_dtb_ref_freq_khz, }; -static void dcn35_read_ss_info_from_lut(struct clk_mgr_internal *clk_mgr) -{ - uint32_t clock_source; - struct dc_context *ctx = clk_mgr->base.ctx; - - REG_GET(CLK1_CLK2_BYPASS_CNTL, CLK2_BYPASS_SEL, &clock_source); - - clk_mgr->dprefclk_ss_percentage = ss_info_table.ss_percentage[clock_source]; - - if (clk_mgr->dprefclk_ss_percentage != 0) { - clk_mgr->ss_on_dprefclk = true; - clk_mgr->dprefclk_ss_divider = ss_info_table.ss_divider; - } -} - void dcn35_clk_mgr_construct( struct dc_context *ctx, struct clk_mgr_dcn35 *clk_mgr, @@ -1052,8 +1032,6 @@ void dcn35_clk_mgr_construct( dce_clock_read_ss_info(&clk_mgr->base); /*when clk src is from FCH, it could have ss, same clock src as DPREF clk*/ - dcn35_read_ss_info_from_lut(&clk_mgr->base); - clk_mgr->base.base.bw_params = &dcn35_bw_params; if (clk_mgr->base.base.ctx->dc->debug.pstate_enabled) { -- cgit v1.2.3 From 67e38874b85b8df7b23d29f78ac3d7ecccd9519d Mon Sep 17 00:00:00 2001 From: Alvin Lee Date: Wed, 8 Nov 2023 17:16:28 -0500 Subject: drm/amd/display: Increase num voltage states to 40 [Description] If during driver init stage there are greater than 20 intermediary voltage states while constructing the SOC BB we could hit issues because we will index outside of the clock_limits array and start overwriting data. Increase the total number of states to 40 to avoid this issue. Cc: stable@vger.kernel.org # 6.1+ Reviewed-by: Samson Tam Acked-by: Hamza Mahfooz Signed-off-by: Alvin Lee Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/dc/dml/dc_features.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/amd/display/dc/dml/dc_features.h b/drivers/gpu/drm/amd/display/dc/dml/dc_features.h index 2cbdd75429ff..6e669a2c5b2d 100644 --- a/drivers/gpu/drm/amd/display/dc/dml/dc_features.h +++ b/drivers/gpu/drm/amd/display/dc/dml/dc_features.h @@ -36,7 +36,7 @@ * Define the maximum amount of states supported by the ASIC. Every ASIC has a * specific number of states; this macro defines the maximum number of states. */ -#define DC__VOLTAGE_STATES 20 +#define DC__VOLTAGE_STATES 40 #define DC__NUM_DPP__4 1 #define DC__NUM_DPP__0_PRESENT 1 #define DC__NUM_DPP__1_PRESENT 1 -- cgit v1.2.3 From d9e865826c202b262f9ee3f17a03cc4ac5d44ced Mon Sep 17 00:00:00 2001 From: Camille Cho Date: Fri, 3 Nov 2023 12:08:42 +0800 Subject: drm/amd/display: Simplify brightness initialization [Why] Remove the brightness cache in DC. It uses a single value to represent the brightness for both SDR and HDR mode. This leads to flash in HDR on/off. It also unconditionally programs brightness as in HDR mode. This may introduce garbage on SDR mode in miniLED panel. [How] Simplify the initialization flow by removing the DC cache and taking what panel has as default. Expand the mechanism for PWM to DPCD Aux to restore cached brightness value generally. Cc: stable@vger.kernel.org # 6.1+ Reviewed-by: Krunoslav Kovac Acked-by: Hamza Mahfooz Signed-off-by: Camille Cho Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/dc/dc.h | 1 - drivers/gpu/drm/amd/display/dc/dc_types.h | 4 ---- drivers/gpu/drm/amd/display/dc/link/link_detection.c | 2 +- drivers/gpu/drm/amd/display/dc/link/link_dpms.c | 3 +-- .../display/dc/link/protocols/link_edp_panel_control.c | 16 +++------------- .../display/dc/link/protocols/link_edp_panel_control.h | 1 - 6 files changed, 5 insertions(+), 22 deletions(-) diff --git a/drivers/gpu/drm/amd/display/dc/dc.h b/drivers/gpu/drm/amd/display/dc/dc.h index c4e5c3350b75..2cafd644baff 100644 --- a/drivers/gpu/drm/amd/display/dc/dc.h +++ b/drivers/gpu/drm/amd/display/dc/dc.h @@ -1609,7 +1609,6 @@ struct dc_link { enum edp_revision edp_revision; union dpcd_sink_ext_caps dpcd_sink_ext_caps; - struct backlight_settings backlight_settings; struct psr_settings psr_settings; struct replay_settings replay_settings; diff --git a/drivers/gpu/drm/amd/display/dc/dc_types.h b/drivers/gpu/drm/amd/display/dc/dc_types.h index fcb825e4f1bb..35d146217aef 100644 --- a/drivers/gpu/drm/amd/display/dc/dc_types.h +++ b/drivers/gpu/drm/amd/display/dc/dc_types.h @@ -991,10 +991,6 @@ struct link_mst_stream_allocation_table { struct link_mst_stream_allocation stream_allocations[MAX_CONTROLLER_NUM]; }; -struct backlight_settings { - uint32_t backlight_millinits; -}; - /* PSR feature flags */ struct psr_settings { bool psr_feature_enabled; // PSR is supported by sink diff --git a/drivers/gpu/drm/amd/display/dc/link/link_detection.c b/drivers/gpu/drm/amd/display/dc/link/link_detection.c index f2fe523f914f..24153b0df503 100644 --- a/drivers/gpu/drm/amd/display/dc/link/link_detection.c +++ b/drivers/gpu/drm/amd/display/dc/link/link_detection.c @@ -879,7 +879,7 @@ static bool detect_link_and_local_sink(struct dc_link *link, (link->dpcd_sink_ext_caps.bits.oled == 1)) { dpcd_set_source_specific_data(link); msleep(post_oui_delay); - set_cached_brightness_aux(link); + set_default_brightness_aux(link); } return true; diff --git a/drivers/gpu/drm/amd/display/dc/link/link_dpms.c b/drivers/gpu/drm/amd/display/dc/link/link_dpms.c index 34a4a8c0e18c..f8e01ca09d96 100644 --- a/drivers/gpu/drm/amd/display/dc/link/link_dpms.c +++ b/drivers/gpu/drm/amd/display/dc/link/link_dpms.c @@ -2142,8 +2142,7 @@ static enum dc_status enable_link_dp(struct dc_state *state, if (link->dpcd_sink_ext_caps.bits.oled == 1 || link->dpcd_sink_ext_caps.bits.sdr_aux_backlight_control == 1 || link->dpcd_sink_ext_caps.bits.hdr_aux_backlight_control == 1) { - set_cached_brightness_aux(link); - + set_default_brightness_aux(link); if (link->dpcd_sink_ext_caps.bits.oled == 1) msleep(bl_oled_enable_delay); edp_backlight_enable_aux(link, true); diff --git a/drivers/gpu/drm/amd/display/dc/link/protocols/link_edp_panel_control.c b/drivers/gpu/drm/amd/display/dc/link/protocols/link_edp_panel_control.c index e32a7974a4bc..996e4ee99023 100644 --- a/drivers/gpu/drm/amd/display/dc/link/protocols/link_edp_panel_control.c +++ b/drivers/gpu/drm/amd/display/dc/link/protocols/link_edp_panel_control.c @@ -170,7 +170,6 @@ bool edp_set_backlight_level_nits(struct dc_link *link, *(uint32_t *)&dpcd_backlight_set.backlight_level_millinits = backlight_millinits; *(uint16_t *)&dpcd_backlight_set.backlight_transition_time_ms = (uint16_t)transition_time_in_ms; - link->backlight_settings.backlight_millinits = backlight_millinits; if (!link->dpcd_caps.panel_luminance_control) { if (core_link_write_dpcd(link, DP_SOURCE_BACKLIGHT_LEVEL, @@ -288,9 +287,9 @@ bool set_default_brightness_aux(struct dc_link *link) if (link && link->dpcd_sink_ext_caps.bits.oled == 1) { if (!read_default_bl_aux(link, &default_backlight)) default_backlight = 150000; - // if < 1 nits or > 5000, it might be wrong readback - if (default_backlight < 1000 || default_backlight > 5000000) - default_backlight = 150000; // + // if > 5000, it might be wrong readback + if (default_backlight > 5000000) + default_backlight = 150000; return edp_set_backlight_level_nits(link, true, default_backlight, 0); @@ -298,15 +297,6 @@ bool set_default_brightness_aux(struct dc_link *link) return false; } -bool set_cached_brightness_aux(struct dc_link *link) -{ - if (link->backlight_settings.backlight_millinits) - return edp_set_backlight_level_nits(link, true, - link->backlight_settings.backlight_millinits, 0); - else - return set_default_brightness_aux(link); - return false; -} bool edp_is_ilr_optimization_enabled(struct dc_link *link) { if (link->dpcd_caps.edp_supported_link_rates_count == 0 || !link->panel_config.ilr.optimize_edp_link_rate) diff --git a/drivers/gpu/drm/amd/display/dc/link/protocols/link_edp_panel_control.h b/drivers/gpu/drm/amd/display/dc/link/protocols/link_edp_panel_control.h index ebf7deb63d13..a034288ad75d 100644 --- a/drivers/gpu/drm/amd/display/dc/link/protocols/link_edp_panel_control.h +++ b/drivers/gpu/drm/amd/display/dc/link/protocols/link_edp_panel_control.h @@ -30,7 +30,6 @@ enum dp_panel_mode dp_get_panel_mode(struct dc_link *link); void dp_set_panel_mode(struct dc_link *link, enum dp_panel_mode panel_mode); bool set_default_brightness_aux(struct dc_link *link); -bool set_cached_brightness_aux(struct dc_link *link); void edp_panel_backlight_power_on(struct dc_link *link, bool wait_for_hpd); int edp_get_backlight_level(const struct dc_link *link); bool edp_get_backlight_level_nits(struct dc_link *link, -- cgit v1.2.3 From 5c908a3586492d469aef4f60f74f5298b7cb68af Mon Sep 17 00:00:00 2001 From: Li Ma Date: Tue, 21 Nov 2023 16:54:59 +0800 Subject: drm/amdgpu: add init_registers for nbio v7.11 enable init_registers callback func for nbio v7.11. Signed-off-by: Li Ma Reviewed-by: Yifan Zhang Acked-by: Alex Deucher Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/nbio_v7_11.c | 18 +++++++------- .../amd/include/asic_reg/nbio/nbio_7_11_0_offset.h | 2 ++ .../include/asic_reg/nbio/nbio_7_11_0_sh_mask.h | 29 ++++++++++++++++++++++ 3 files changed, 40 insertions(+), 9 deletions(-) diff --git a/drivers/gpu/drm/amd/amdgpu/nbio_v7_11.c b/drivers/gpu/drm/amd/amdgpu/nbio_v7_11.c index 676ab1d20d2f..1f52b4b1db03 100644 --- a/drivers/gpu/drm/amd/amdgpu/nbio_v7_11.c +++ b/drivers/gpu/drm/amd/amdgpu/nbio_v7_11.c @@ -259,17 +259,17 @@ const struct nbio_hdp_flush_reg nbio_v7_11_hdp_flush_reg = { static void nbio_v7_11_init_registers(struct amdgpu_device *adev) { -/* uint32_t def, data; + uint32_t def, data; + + def = data = RREG32_SOC15(NBIO, 0, regBIF_BIF256_CI256_RC3X4_USB4_PCIE_MST_CTRL_3); + data = REG_SET_FIELD(data, BIF_BIF256_CI256_RC3X4_USB4_PCIE_MST_CTRL_3, + CI_SWUS_MAX_READ_REQUEST_SIZE_MODE, 1); + data = REG_SET_FIELD(data, BIF_BIF256_CI256_RC3X4_USB4_PCIE_MST_CTRL_3, + CI_SWUS_MAX_READ_REQUEST_SIZE_PRIV, 1); - def = data = RREG32_SOC15(NBIO, 0, regBIF_BIF256_CI256_RC3X4_USB4_PCIE_MST_CTRL_3); - data = REG_SET_FIELD(data, BIF_BIF256_CI256_RC3X4_USB4_PCIE_MST_CTRL_3, - CI_SWUS_MAX_READ_REQUEST_SIZE_MODE, 1); - data = REG_SET_FIELD(data, BIF_BIF256_CI256_RC3X4_USB4_PCIE_MST_CTRL_3, - CI_SWUS_MAX_READ_REQUEST_SIZE_PRIV, 1); + if (def != data) + WREG32_SOC15(NBIO, 0, regBIF_BIF256_CI256_RC3X4_USB4_PCIE_MST_CTRL_3, data); - if (def != data) - WREG32_SOC15(NBIO, 0, regBIF_BIF256_CI256_RC3X4_USB4_PCIE_MST_CTRL_3, data); -*/ } static void nbio_v7_11_update_medium_grain_clock_gating(struct amdgpu_device *adev, diff --git a/drivers/gpu/drm/amd/include/asic_reg/nbio/nbio_7_11_0_offset.h b/drivers/gpu/drm/amd/include/asic_reg/nbio/nbio_7_11_0_offset.h index ff30f04be591..7ee3d291120d 100644 --- a/drivers/gpu/drm/amd/include/asic_reg/nbio/nbio_7_11_0_offset.h +++ b/drivers/gpu/drm/amd/include/asic_reg/nbio/nbio_7_11_0_offset.h @@ -781,6 +781,8 @@ #define regBIF_BIF256_CI256_RC3X4_USB4_PCIE_CNTL2_BASE_IDX 5 #define regBIF_BIF256_CI256_RC3X4_USB4_PCIE_TX_POWER_CTRL_1 0x420187 #define regBIF_BIF256_CI256_RC3X4_USB4_PCIE_TX_POWER_CTRL_1_BASE_IDX 5 +#define regBIF_BIF256_CI256_RC3X4_USB4_PCIE_MST_CTRL_3 0x4201c6 +#define regBIF_BIF256_CI256_RC3X4_USB4_PCIE_MST_CTRL_3_BASE_IDX 5 // addressBlock: nbio_nbif0_bif_cfg_dev0_rc_bifcfgdecp diff --git a/drivers/gpu/drm/amd/include/asic_reg/nbio/nbio_7_11_0_sh_mask.h b/drivers/gpu/drm/amd/include/asic_reg/nbio/nbio_7_11_0_sh_mask.h index 7f131999a263..eb8c556d9c93 100644 --- a/drivers/gpu/drm/amd/include/asic_reg/nbio/nbio_7_11_0_sh_mask.h +++ b/drivers/gpu/drm/amd/include/asic_reg/nbio/nbio_7_11_0_sh_mask.h @@ -24646,6 +24646,35 @@ //BIF_BIF256_CI256_RC3X4_USB4_PCIE_TX_POWER_CTRL_1 #define BIF_BIF256_CI256_RC3X4_USB4_PCIE_TX_POWER_CTRL_1__MST_MEM_LS_EN_MASK 0x00000001L #define BIF_BIF256_CI256_RC3X4_USB4_PCIE_TX_POWER_CTRL_1__REPLAY_MEM_LS_EN_MASK 0x00000008L +//BIF_BIF256_CI256_RC3X4_USB4_PCIE_MST_CTRL_3 +#define BIF_BIF256_CI256_RC3X4_USB4_PCIE_MST_CTRL_3__CI_SWUS_MAX_PAYLOAD_SIZE_MODE__SHIFT 0x8 +#define BIF_BIF256_CI256_RC3X4_USB4_PCIE_MST_CTRL_3__CI_SWUS_PRIV_MAX_PAYLOAD_SIZE__SHIFT 0x9 +#define BIF_BIF256_CI256_RC3X4_USB4_PCIE_MST_CTRL_3__CI_10BIT_TAG_EN_OVERRIDE__SHIFT 0xb +#define BIF_BIF256_CI256_RC3X4_USB4_PCIE_MST_CTRL_3__CI_SWUS_10BIT_TAG_EN_OVERRIDE__SHIFT 0xd +#define BIF_BIF256_CI256_RC3X4_USB4_PCIE_MST_CTRL_3__MST_DROP_SYNC_FLOOD_EN__SHIFT 0xf +#define BIF_BIF256_CI256_RC3X4_USB4_PCIE_MST_CTRL_3__CI_MAX_PAYLOAD_SIZE_MODE__SHIFT 0x10 +#define BIF_BIF256_CI256_RC3X4_USB4_PCIE_MST_CTRL_3__CI_PRIV_MAX_PAYLOAD_SIZE__SHIFT 0x11 +#define BIF_BIF256_CI256_RC3X4_USB4_PCIE_MST_CTRL_3__CI_MAX_READ_REQUEST_SIZE_MODE__SHIFT 0x14 +#define BIF_BIF256_CI256_RC3X4_USB4_PCIE_MST_CTRL_3__CI_PRIV_MAX_READ_REQUEST_SIZE__SHIFT 0x15 +#define BIF_BIF256_CI256_RC3X4_USB4_PCIE_MST_CTRL_3__CI_MAX_READ_SAFE_MODE__SHIFT 0x18 +#define BIF_BIF256_CI256_RC3X4_USB4_PCIE_MST_CTRL_3__CI_EXTENDED_TAG_EN_OVERRIDE__SHIFT 0x19 +#define BIF_BIF256_CI256_RC3X4_USB4_PCIE_MST_CTRL_3__CI_SWUS_MAX_READ_REQUEST_SIZE_MODE__SHIFT 0x1b +#define BIF_BIF256_CI256_RC3X4_USB4_PCIE_MST_CTRL_3__CI_SWUS_MAX_READ_REQUEST_SIZE_PRIV__SHIFT 0x1c +#define BIF_BIF256_CI256_RC3X4_USB4_PCIE_MST_CTRL_3__CI_SWUS_EXTENDED_TAG_EN_OVERRIDE__SHIFT 0x1e +#define BIF_BIF256_CI256_RC3X4_USB4_PCIE_MST_CTRL_3__CI_SWUS_MAX_PAYLOAD_SIZE_MODE_MASK 0x00000100L +#define BIF_BIF256_CI256_RC3X4_USB4_PCIE_MST_CTRL_3__CI_SWUS_PRIV_MAX_PAYLOAD_SIZE_MASK 0x00000600L +#define BIF_BIF256_CI256_RC3X4_USB4_PCIE_MST_CTRL_3__CI_10BIT_TAG_EN_OVERRIDE_MASK 0x00001800L +#define BIF_BIF256_CI256_RC3X4_USB4_PCIE_MST_CTRL_3__CI_SWUS_10BIT_TAG_EN_OVERRIDE_MASK 0x00006000L +#define BIF_BIF256_CI256_RC3X4_USB4_PCIE_MST_CTRL_3__MST_DROP_SYNC_FLOOD_EN_MASK 0x00008000L +#define BIF_BIF256_CI256_RC3X4_USB4_PCIE_MST_CTRL_3__CI_MAX_PAYLOAD_SIZE_MODE_MASK 0x00010000L +#define BIF_BIF256_CI256_RC3X4_USB4_PCIE_MST_CTRL_3__CI_PRIV_MAX_PAYLOAD_SIZE_MASK 0x000E0000L +#define BIF_BIF256_CI256_RC3X4_USB4_PCIE_MST_CTRL_3__CI_MAX_READ_REQUEST_SIZE_MODE_MASK 0x00100000L +#define BIF_BIF256_CI256_RC3X4_USB4_PCIE_MST_CTRL_3__CI_PRIV_MAX_READ_REQUEST_SIZE_MASK 0x00E00000L +#define BIF_BIF256_CI256_RC3X4_USB4_PCIE_MST_CTRL_3__CI_MAX_READ_SAFE_MODE_MASK 0x01000000L +#define BIF_BIF256_CI256_RC3X4_USB4_PCIE_MST_CTRL_3__CI_EXTENDED_TAG_EN_OVERRIDE_MASK 0x06000000L +#define BIF_BIF256_CI256_RC3X4_USB4_PCIE_MST_CTRL_3__CI_SWUS_MAX_READ_REQUEST_SIZE_MODE_MASK 0x08000000L +#define BIF_BIF256_CI256_RC3X4_USB4_PCIE_MST_CTRL_3__CI_SWUS_MAX_READ_REQUEST_SIZE_PRIV_MASK 0x30000000L +#define BIF_BIF256_CI256_RC3X4_USB4_PCIE_MST_CTRL_3__CI_SWUS_EXTENDED_TAG_EN_OVERRIDE_MASK 0xC0000000L // addressBlock: nbio_nbif0_bif_cfg_dev0_rc_bifcfgdecp //BIF_CFG_DEV0_RC0_VENDOR_ID -- cgit v1.2.3 From 6b0b7789a7a5f3e69185449f891beea58e563f9b Mon Sep 17 00:00:00 2001 From: Tim Huang Date: Tue, 21 Nov 2023 11:06:51 +0800 Subject: drm/amdgpu: fix memory overflow in the IB test MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Fix a memory overflow issue in the gfx IB test for some ASICs. At least 20 bytes are needed for the IB test packet. v2: correct code indentation errors. (Christian) Signed-off-by: Tim Huang Reviewed-by: Yifan Zhang Reviewed-by: Christian König Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/amdgpu/gfx_v11_0.c | 2 +- drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c | 4 ++-- drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c | 4 ++-- drivers/gpu/drm/amd/amdgpu/gfx_v9_4_3.c | 4 ++-- 4 files changed, 7 insertions(+), 7 deletions(-) diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v11_0.c b/drivers/gpu/drm/amd/amdgpu/gfx_v11_0.c index 40ce12323164..8ed4a6fb147a 100644 --- a/drivers/gpu/drm/amd/amdgpu/gfx_v11_0.c +++ b/drivers/gpu/drm/amd/amdgpu/gfx_v11_0.c @@ -427,7 +427,7 @@ static int gfx_v11_0_ring_test_ib(struct amdgpu_ring *ring, long timeout) adev->wb.wb[index] = cpu_to_le32(0xCAFEDEAD); cpu_ptr = &adev->wb.wb[index]; - r = amdgpu_ib_get(adev, NULL, 16, AMDGPU_IB_POOL_DIRECT, &ib); + r = amdgpu_ib_get(adev, NULL, 20, AMDGPU_IB_POOL_DIRECT, &ib); if (r) { DRM_ERROR("amdgpu: failed to get ib (%ld).\n", r); goto err1; diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c b/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c index 885ebd703260..1943beb135c4 100644 --- a/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c +++ b/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c @@ -883,8 +883,8 @@ static int gfx_v8_0_ring_test_ib(struct amdgpu_ring *ring, long timeout) gpu_addr = adev->wb.gpu_addr + (index * 4); adev->wb.wb[index] = cpu_to_le32(0xCAFEDEAD); memset(&ib, 0, sizeof(ib)); - r = amdgpu_ib_get(adev, NULL, 16, - AMDGPU_IB_POOL_DIRECT, &ib); + + r = amdgpu_ib_get(adev, NULL, 20, AMDGPU_IB_POOL_DIRECT, &ib); if (r) goto err1; diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c b/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c index e3ff6e46f3f7..69c500910746 100644 --- a/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c +++ b/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c @@ -1039,8 +1039,8 @@ static int gfx_v9_0_ring_test_ib(struct amdgpu_ring *ring, long timeout) gpu_addr = adev->wb.gpu_addr + (index * 4); adev->wb.wb[index] = cpu_to_le32(0xCAFEDEAD); memset(&ib, 0, sizeof(ib)); - r = amdgpu_ib_get(adev, NULL, 16, - AMDGPU_IB_POOL_DIRECT, &ib); + + r = amdgpu_ib_get(adev, NULL, 20, AMDGPU_IB_POOL_DIRECT, &ib); if (r) goto err1; diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v9_4_3.c b/drivers/gpu/drm/amd/amdgpu/gfx_v9_4_3.c index 40d06d32bb74..4a09cc0d8ce0 100644 --- a/drivers/gpu/drm/amd/amdgpu/gfx_v9_4_3.c +++ b/drivers/gpu/drm/amd/amdgpu/gfx_v9_4_3.c @@ -297,8 +297,8 @@ static int gfx_v9_4_3_ring_test_ib(struct amdgpu_ring *ring, long timeout) gpu_addr = adev->wb.gpu_addr + (index * 4); adev->wb.wb[index] = cpu_to_le32(0xCAFEDEAD); memset(&ib, 0, sizeof(ib)); - r = amdgpu_ib_get(adev, NULL, 16, - AMDGPU_IB_POOL_DIRECT, &ib); + + r = amdgpu_ib_get(adev, NULL, 20, AMDGPU_IB_POOL_DIRECT, &ib); if (r) goto err1; -- cgit v1.2.3 From 08448812acb2ab701cd5ff7e1a1dc97f7f10260c Mon Sep 17 00:00:00 2001 From: Nicholas Kazlauskas Date: Wed, 8 Nov 2023 10:55:53 -0500 Subject: drm/amd/display: Remove min_dst_y_next_start check for Z8 [Why] Flickering occurs on DRR supported panels when engaged in DRR due to min_dst_y_next becoming larger than the frame size itself. [How] In general, we should be able to enter Z8 when this is engaged but it might be a net power loss even if the calculation wasn't bugged. Don't support enabling Z8 during the DRR region. Cc: stable@vger.kernel.org # 6.1+ Reviewed-by: Syed Hassan Acked-by: Hamza Mahfooz Signed-off-by: Nicholas Kazlauskas Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/dc/dml/dcn20/dcn20_fpu.c | 15 +-------------- 1 file changed, 1 insertion(+), 14 deletions(-) diff --git a/drivers/gpu/drm/amd/display/dc/dml/dcn20/dcn20_fpu.c b/drivers/gpu/drm/amd/display/dc/dml/dcn20/dcn20_fpu.c index 7fc8b18096ba..ec77b2b41ba3 100644 --- a/drivers/gpu/drm/amd/display/dc/dml/dcn20/dcn20_fpu.c +++ b/drivers/gpu/drm/amd/display/dc/dml/dcn20/dcn20_fpu.c @@ -950,10 +950,8 @@ static enum dcn_zstate_support_state decide_zstate_support(struct dc *dc, struc { int plane_count; int i; - unsigned int min_dst_y_next_start_us; plane_count = 0; - min_dst_y_next_start_us = 0; for (i = 0; i < dc->res_pool->pipe_count; i++) { if (context->res_ctx.pipe_ctx[i].plane_state) plane_count++; @@ -975,26 +973,15 @@ static enum dcn_zstate_support_state decide_zstate_support(struct dc *dc, struc else if (context->stream_count == 1 && context->streams[0]->signal == SIGNAL_TYPE_EDP) { struct dc_link *link = context->streams[0]->sink->link; struct dc_stream_status *stream_status = &context->stream_status[0]; - struct dc_stream_state *current_stream = context->streams[0]; int minmum_z8_residency = dc->debug.minimum_z8_residency_time > 0 ? dc->debug.minimum_z8_residency_time : 1000; bool allow_z8 = context->bw_ctx.dml.vba.StutterPeriod > (double)minmum_z8_residency; bool is_pwrseq0 = link->link_index == 0; - bool isFreesyncVideo; - - isFreesyncVideo = current_stream->adjust.v_total_min == current_stream->adjust.v_total_max; - isFreesyncVideo = isFreesyncVideo && current_stream->timing.v_total < current_stream->adjust.v_total_min; - for (i = 0; i < dc->res_pool->pipe_count; i++) { - if (context->res_ctx.pipe_ctx[i].stream == current_stream && isFreesyncVideo) { - min_dst_y_next_start_us = context->res_ctx.pipe_ctx[i].dlg_regs.min_dst_y_next_start_us; - break; - } - } /* Don't support multi-plane configurations */ if (stream_status->plane_count > 1) return DCN_ZSTATE_SUPPORT_DISALLOW; - if (is_pwrseq0 && (context->bw_ctx.dml.vba.StutterPeriod > 5000.0 || min_dst_y_next_start_us > 5000)) + if (is_pwrseq0 && context->bw_ctx.dml.vba.StutterPeriod > 5000.0) return DCN_ZSTATE_SUPPORT_ALLOW; else if (is_pwrseq0 && link->psr_settings.psr_version == DC_PSR_VERSION_1 && !link->panel_config.psr.disable_psr) return allow_z8 ? DCN_ZSTATE_SUPPORT_ALLOW_Z8_Z10_ONLY : DCN_ZSTATE_SUPPORT_ALLOW_Z10_ONLY; -- cgit v1.2.3 From 4636a211980052ca0df90265c8a3ed2d46099091 Mon Sep 17 00:00:00 2001 From: Nicholas Kazlauskas Date: Wed, 8 Nov 2023 10:59:00 -0500 Subject: drm/amd/display: Update min Z8 residency time to 2100 for DCN314 [Why] Some panels with residency period of 2054 exhibit flickering with Z8 at the end of the frame. [How] As a workaround, increase the limit to block these panels. Cc: stable@vger.kernel.org # 6.1+ Reviewed-by: Syed Hassan Acked-by: Hamza Mahfooz Signed-off-by: Nicholas Kazlauskas Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/dc/dcn314/dcn314_resource.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/amd/display/dc/dcn314/dcn314_resource.c b/drivers/gpu/drm/amd/display/dc/dcn314/dcn314_resource.c index 677361d74a4e..c97391edb5ff 100644 --- a/drivers/gpu/drm/amd/display/dc/dcn314/dcn314_resource.c +++ b/drivers/gpu/drm/amd/display/dc/dcn314/dcn314_resource.c @@ -871,7 +871,7 @@ static const struct dc_plane_cap plane_cap = { static const struct dc_debug_options debug_defaults_drv = { .disable_z10 = false, .enable_z9_disable_interface = true, - .minimum_z8_residency_time = 2000, + .minimum_z8_residency_time = 2100, .psr_skip_crtc_disable = true, .replay_skip_crtc_disabled = true, .disable_dmcu = true, -- cgit v1.2.3 From c6df7f313794c3ad41a49b9a7c95da369db607f3 Mon Sep 17 00:00:00 2001 From: Prike Liang Date: Wed, 8 Nov 2023 14:38:29 +0800 Subject: drm/amdgpu: correct the amdgpu runtime dereference usage count Fix the amdgpu runpm dereference usage count. Signed-off-by: Prike Liang Reviewed-by: Alex Deucher Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/amdgpu/amdgpu_display.c | 9 +++------ 1 file changed, 3 insertions(+), 6 deletions(-) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_display.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_display.c index 0cacd0b9f8be..b8fbe97efe1d 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_display.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_display.c @@ -340,14 +340,11 @@ int amdgpu_display_crtc_set_config(struct drm_mode_set *set, adev->have_disp_power_ref = true; return ret; } - /* if we have no active crtcs, then drop the power ref - * we got before + /* if we have no active crtcs, then go to + * drop the power ref we got before */ - if (!active && adev->have_disp_power_ref) { - pm_runtime_put_autosuspend(dev->dev); + if (!active && adev->have_disp_power_ref) adev->have_disp_power_ref = false; - } - out: /* drop the power reference we got coming in here */ pm_runtime_put_autosuspend(dev->dev); -- cgit v1.2.3 From eb28018943fed7639dfea1c9ec9c756ec692b99a Mon Sep 17 00:00:00 2001 From: Zhongwei Date: Wed, 8 Nov 2023 16:34:36 +0800 Subject: drm/amd/display: force toggle rate wa for first link training for a retimer [WHY] Handover from DMUB to driver does not perform link rate toggle. It might cause link training failure for boot up. [HOW] Force toggle rate wa for first link train. link->vendor_specific_lttpr_link_rate_wa should be zero then. Cc: stable@vger.kernel.org # 6.1+ Reviewed-by: Michael Strauss Acked-by: Hamza Mahfooz Signed-off-by: Zhongwei Signed-off-by: Alex Deucher --- .../dc/link/protocols/link_dp_training_fixed_vs_pe_retimer.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/amd/display/dc/link/protocols/link_dp_training_fixed_vs_pe_retimer.c b/drivers/gpu/drm/amd/display/dc/link/protocols/link_dp_training_fixed_vs_pe_retimer.c index fd8f6f198146..68096d12f52f 100644 --- a/drivers/gpu/drm/amd/display/dc/link/protocols/link_dp_training_fixed_vs_pe_retimer.c +++ b/drivers/gpu/drm/amd/display/dc/link/protocols/link_dp_training_fixed_vs_pe_retimer.c @@ -115,7 +115,7 @@ static enum link_training_result perform_fixed_vs_pe_nontransparent_training_seq lt_settings->cr_pattern_time = 16000; /* Fixed VS/PE specific: Toggle link rate */ - apply_toggle_rate_wa = (link->vendor_specific_lttpr_link_rate_wa == target_rate); + apply_toggle_rate_wa = ((link->vendor_specific_lttpr_link_rate_wa == target_rate) || (link->vendor_specific_lttpr_link_rate_wa == 0)); target_rate = get_dpcd_link_rate(<_settings->link_settings); toggle_rate = (target_rate == 0x6) ? 0xA : 0x6; @@ -271,7 +271,7 @@ enum link_training_result dp_perform_fixed_vs_pe_training_sequence_legacy( /* Vendor specific: Toggle link rate */ toggle_rate = (rate == 0x6) ? 0xA : 0x6; - if (link->vendor_specific_lttpr_link_rate_wa == rate) { + if (link->vendor_specific_lttpr_link_rate_wa == rate || link->vendor_specific_lttpr_link_rate_wa == 0) { core_link_write_dpcd( link, DP_LINK_BW_SET, @@ -617,7 +617,7 @@ enum link_training_result dp_perform_fixed_vs_pe_training_sequence( /* Vendor specific: Toggle link rate */ toggle_rate = (rate == 0x6) ? 0xA : 0x6; - if (link->vendor_specific_lttpr_link_rate_wa == rate) { + if (link->vendor_specific_lttpr_link_rate_wa == rate || link->vendor_specific_lttpr_link_rate_wa == 0) { core_link_write_dpcd( link, DP_LINK_BW_SET, -- cgit v1.2.3 From d60f56b92d3c59364a54618d557d7f9ba5939b21 Mon Sep 17 00:00:00 2001 From: Nicholas Kazlauskas Date: Fri, 3 Nov 2023 18:07:11 -0400 Subject: drm/amd/display: Update DCN35 clock table policy [Why] The new table doesn't have an implicit mapping between Fclk SOC voltage and MemClk and it currently builds the table off of number of Fclk states rather than DcfClock states. The DML table in use is not correct for functionality or power and does not align with our existing policies for DCN3x. [How] Build the table based on DcfClock with the following assumptions: 1. Raising Soc voltage is the most expensive operation, so assume that running at max DispClock or DppClock is preferable. 2. Assume that we can run at max Fclk / MemClk at any state, but restrict the maximum state to the very last entry in the table as the worst case scenario. 3. Assume that Fclk always has a 2x multiplier on DcfClock unless the table specifies something lower. Reviewed-by: Taimur Hassan Acked-by: Hamza Mahfooz Signed-off-by: Nicholas Kazlauskas Signed-off-by: Alex Deucher --- .../amd/display/dc/clk_mgr/dcn35/dcn35_clk_mgr.c | 77 ++++++++++++++-------- 1 file changed, 51 insertions(+), 26 deletions(-) diff --git a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn35/dcn35_clk_mgr.c b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn35/dcn35_clk_mgr.c index 0f3f6a9d5144..19f8d83698be 100644 --- a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn35/dcn35_clk_mgr.c +++ b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn35/dcn35_clk_mgr.c @@ -648,27 +648,47 @@ static unsigned int convert_wck_ratio(uint8_t wck_ratio) return 1; } +static inline uint32_t calc_dram_speed_mts(const MemPstateTable_t *entry) +{ + return entry->UClk * convert_wck_ratio(entry->WckRatio) * 2; +} + static void dcn35_clk_mgr_helper_populate_bw_params(struct clk_mgr_internal *clk_mgr, struct integrated_info *bios_info, DpmClocks_t_dcn35 *clock_table) { struct clk_bw_params *bw_params = clk_mgr->base.bw_params; struct clk_limit_table_entry def_max = bw_params->clk_table.entries[bw_params->clk_table.num_entries - 1]; - uint32_t max_pstate = 0, max_uclk = 0, max_fclk = 0; - uint32_t min_pstate = 0, max_dispclk = 0, max_dppclk = 0; + uint32_t max_fclk = 0, min_pstate = 0, max_dispclk = 0, max_dppclk = 0; + uint32_t max_pstate = 0, max_dram_speed_mts = 0, min_dram_speed_mts = 0; int i; + /* Determine min/max p-state values. */ for (i = 0; i < clock_table->NumMemPstatesEnabled; i++) { - if (is_valid_clock_value(clock_table->MemPstateTable[i].UClk) && - clock_table->MemPstateTable[i].UClk > max_uclk) { - max_uclk = clock_table->MemPstateTable[i].UClk; + uint32_t dram_speed_mts = calc_dram_speed_mts(&clock_table->MemPstateTable[i]); + + if (is_valid_clock_value(dram_speed_mts) && dram_speed_mts > max_dram_speed_mts) { + max_dram_speed_mts = dram_speed_mts; max_pstate = i; } } - /* We expect the table to contain at least one valid Uclk entry. */ - ASSERT(is_valid_clock_value(max_uclk)); + min_dram_speed_mts = max_dram_speed_mts; + min_pstate = max_pstate; + for (i = 0; i < clock_table->NumMemPstatesEnabled; i++) { + uint32_t dram_speed_mts = calc_dram_speed_mts(&clock_table->MemPstateTable[i]); + + if (is_valid_clock_value(dram_speed_mts) && dram_speed_mts < min_dram_speed_mts) { + min_dram_speed_mts = dram_speed_mts; + min_pstate = i; + } + } + + /* We expect the table to contain at least one valid P-state entry. */ + ASSERT(clock_table->NumMemPstatesEnabled && + is_valid_clock_value(max_dram_speed_mts) && + is_valid_clock_value(min_dram_speed_mts)); /* dispclk and dppclk can be max at any voltage, same number of levels for both */ if (clock_table->NumDispClkLevelsEnabled <= NUM_DISPCLK_DPM_LEVELS && @@ -678,47 +698,46 @@ static void dcn35_clk_mgr_helper_populate_bw_params(struct clk_mgr_internal *clk max_dppclk = find_max_clk_value(clock_table->DppClocks, clock_table->NumDispClkLevelsEnabled); } else { + /* Invalid number of entries in the table from PMFW. */ ASSERT(0); } - if (clock_table->NumFclkLevelsEnabled <= NUM_FCLK_DPM_LEVELS) - max_fclk = find_max_clk_value(clock_table->FclkClocks_Freq, - clock_table->NumFclkLevelsEnabled); - for (i = 0; i < clock_table->NumMemPstatesEnabled; i++) { - uint32_t min_uclk = clock_table->MemPstateTable[0].UClk; - int j; + /* Base the clock table on dcfclk, need at least one entry regardless of pmfw table */ + ASSERT(clock_table->NumDcfClkLevelsEnabled > 0); - for (j = 1; j < clock_table->NumMemPstatesEnabled; j++) { - if (is_valid_clock_value(clock_table->MemPstateTable[j].UClk) && - clock_table->MemPstateTable[j].UClk < min_uclk && - clock_table->MemPstateTable[j].Voltage <= clock_table->SocVoltage[i]) { - min_uclk = clock_table->MemPstateTable[j].UClk; - min_pstate = j; - } - } + max_fclk = find_max_clk_value(clock_table->FclkClocks_Freq, clock_table->NumFclkLevelsEnabled); + for (i = 0; i < clock_table->NumDcfClkLevelsEnabled; i++) { + int j; + + /* First search defaults for the clocks we don't read using closest lower or equal default dcfclk */ for (j = bw_params->clk_table.num_entries - 1; j > 0; j--) if (bw_params->clk_table.entries[j].dcfclk_mhz <= clock_table->DcfClocks[i]) - break; + break; bw_params->clk_table.entries[i].phyclk_mhz = bw_params->clk_table.entries[j].phyclk_mhz; bw_params->clk_table.entries[i].phyclk_d18_mhz = bw_params->clk_table.entries[j].phyclk_d18_mhz; bw_params->clk_table.entries[i].dtbclk_mhz = bw_params->clk_table.entries[j].dtbclk_mhz; - bw_params->clk_table.entries[i].fclk_mhz = max_fclk; + + /* Now update clocks we do read */ bw_params->clk_table.entries[i].memclk_mhz = clock_table->MemPstateTable[min_pstate].MemClk; bw_params->clk_table.entries[i].voltage = clock_table->MemPstateTable[min_pstate].Voltage; bw_params->clk_table.entries[i].dcfclk_mhz = clock_table->DcfClocks[i]; bw_params->clk_table.entries[i].socclk_mhz = clock_table->SocClocks[i]; bw_params->clk_table.entries[i].dispclk_mhz = max_dispclk; bw_params->clk_table.entries[i].dppclk_mhz = max_dppclk; - bw_params->clk_table.entries[i].wck_ratio = convert_wck_ratio( - clock_table->MemPstateTable[min_pstate].WckRatio); - } + bw_params->clk_table.entries[i].wck_ratio = + convert_wck_ratio(clock_table->MemPstateTable[min_pstate].WckRatio); + + /* Dcfclk and Fclk are tied, but at a different ratio */ + bw_params->clk_table.entries[i].fclk_mhz = min(max_fclk, 2 * clock_table->DcfClocks[i]); + } /* Make sure to include at least one entry at highest pstate */ if (max_pstate != min_pstate || i == 0) { if (i > MAX_NUM_DPM_LVL - 1) i = MAX_NUM_DPM_LVL - 1; + bw_params->clk_table.entries[i].fclk_mhz = max_fclk; bw_params->clk_table.entries[i].memclk_mhz = clock_table->MemPstateTable[max_pstate].MemClk; bw_params->clk_table.entries[i].voltage = clock_table->MemPstateTable[max_pstate].Voltage; @@ -734,6 +753,7 @@ static void dcn35_clk_mgr_helper_populate_bw_params(struct clk_mgr_internal *clk } bw_params->clk_table.num_entries = i--; + /* Make sure all highest clocks are included*/ bw_params->clk_table.entries[i].socclk_mhz = find_max_clk_value(clock_table->SocClocks, NUM_SOCCLK_DPM_LEVELS); bw_params->clk_table.entries[i].dispclk_mhz = @@ -752,6 +772,11 @@ static void dcn35_clk_mgr_helper_populate_bw_params(struct clk_mgr_internal *clk bw_params->clk_table.num_entries_per_clk.num_fclk_levels = clock_table->NumFclkLevelsEnabled; bw_params->clk_table.num_entries_per_clk.num_memclk_levels = clock_table->NumMemPstatesEnabled; bw_params->clk_table.num_entries_per_clk.num_socclk_levels = clock_table->NumSocClkLevelsEnabled; + + /* + * Set any 0 clocks to max default setting. Not an issue for + * power since we aren't doing switching in such case anyway + */ for (i = 0; i < bw_params->clk_table.num_entries; i++) { if (!bw_params->clk_table.entries[i].fclk_mhz) { bw_params->clk_table.entries[i].fclk_mhz = def_max.fclk_mhz; -- cgit v1.2.3 From c5ca994445a6c99012e70ed6f3550f07efa4c341 Mon Sep 17 00:00:00 2001 From: Taimur Hassan Date: Fri, 10 Nov 2023 10:06:09 -0500 Subject: drm/amd/display: Remove config update [Why] Prevent overwrite of dc->config.use_default_clock_table, as it should be pre-configured. Reviewed-by: Nicholas Kazlauskas Acked-by: Hamza Mahfooz Signed-off-by: Taimur Hassan Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/dc/dcn35/dcn35_resource.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/amd/display/dc/dcn35/dcn35_resource.c b/drivers/gpu/drm/amd/display/dc/dcn35/dcn35_resource.c index 8f1a9c959bb5..70ef1e7ff841 100644 --- a/drivers/gpu/drm/amd/display/dc/dcn35/dcn35_resource.c +++ b/drivers/gpu/drm/amd/display/dc/dcn35/dcn35_resource.c @@ -1864,7 +1864,7 @@ static bool dcn35_resource_construct( /* Use pipe context based otg sync logic */ dc->config.use_pipe_ctx_sync_logic = true; - dc->config.use_default_clock_table = false; + /* read VBIOS LTTPR caps */ { if (ctx->dc_bios->funcs->get_lttpr_caps) { -- cgit v1.2.3 From 2f86bf79b63dbe6963ebc647b77a5f576a906b40 Mon Sep 17 00:00:00 2001 From: Mukul Joshi Date: Wed, 22 Nov 2023 15:17:22 -0500 Subject: drm/amdkfd: Use common function for IP version check KFD_GC_VERSION was recently updated to use a new function for IP version checks. As a result, use KFD_GC_VERSION as the common function for all IP version checks in KFD. Signed-off-by: Mukul Joshi Reviewed-by: Harish Kasiviswanathan Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdkfd/kfd_priv.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_priv.h b/drivers/gpu/drm/amd/amdkfd/kfd_priv.h index 9cc32f577e38..4c8e278a0d0c 100644 --- a/drivers/gpu/drm/amd/amdkfd/kfd_priv.h +++ b/drivers/gpu/drm/amd/amdkfd/kfd_priv.h @@ -1128,7 +1128,7 @@ static inline struct kfd_node *kfd_node_by_irq_ids(struct amdgpu_device *adev, struct kfd_dev *dev = adev->kfd.dev; uint32_t i; - if (adev->ip_versions[GC_HWIP][0] != IP_VERSION(9, 4, 3)) + if (KFD_GC_VERSION(dev) != IP_VERSION(9, 4, 3)) return dev->nodes[0]; for (i = 0; i < dev->num_nodes; i++) -- cgit v1.2.3 From dcf6cd7f35de572a946e2805ed32eb20d429a881 Mon Sep 17 00:00:00 2001 From: Taimur Hassan Date: Fri, 10 Nov 2023 10:15:28 -0500 Subject: drm/amd/display: Fix conversions between bytes and KB [Why] There are a number of instances where we convert HostVMMinPageSize or GPUVMMinPageSize from bytes to KB by dividing (rather than multiplying) and vice versa. Additionally, in some cases, a parameter is passed through DML in KB but later checked as if it were in bytes. Cc: stable@vger.kernel.org Reviewed-by: Nicholas Kazlauskas Acked-by: Hamza Mahfooz Signed-off-by: Taimur Hassan Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/dc/dml2/display_mode_core.c | 16 ++++++++-------- .../drm/amd/display/dc/dml2/dml2_translation_helper.c | 4 ++-- 2 files changed, 10 insertions(+), 10 deletions(-) diff --git a/drivers/gpu/drm/amd/display/dc/dml2/display_mode_core.c b/drivers/gpu/drm/amd/display/dc/dml2/display_mode_core.c index 510be909cd75..59718ee33e51 100644 --- a/drivers/gpu/drm/amd/display/dc/dml2/display_mode_core.c +++ b/drivers/gpu/drm/amd/display/dc/dml2/display_mode_core.c @@ -6329,7 +6329,7 @@ static void dml_prefetch_check(struct display_mode_lib_st *mode_lib) mode_lib->ms.NoOfDPPThisState, mode_lib->ms.dpte_group_bytes, s->HostVMInefficiencyFactor, - mode_lib->ms.soc.hostvm_min_page_size_kbytes, + mode_lib->ms.soc.hostvm_min_page_size_kbytes * 1024, mode_lib->ms.cache_display_cfg.plane.HostVMMaxPageTableLevels); s->NextMaxVStartup = s->MaxVStartupAllPlanes[j]; @@ -6542,7 +6542,7 @@ static void dml_prefetch_check(struct display_mode_lib_st *mode_lib) mode_lib->ms.cache_display_cfg.plane.HostVMEnable, mode_lib->ms.cache_display_cfg.plane.HostVMMaxPageTableLevels, mode_lib->ms.cache_display_cfg.plane.GPUVMEnable, - mode_lib->ms.soc.hostvm_min_page_size_kbytes, + mode_lib->ms.soc.hostvm_min_page_size_kbytes * 1024, mode_lib->ms.PDEAndMetaPTEBytesPerFrame[j][k], mode_lib->ms.MetaRowBytes[j][k], mode_lib->ms.DPTEBytesPerRow[j][k], @@ -7687,7 +7687,7 @@ dml_bool_t dml_core_mode_support(struct display_mode_lib_st *mode_lib) CalculateVMRowAndSwath_params->HostVMMaxNonCachedPageTableLevels = mode_lib->ms.cache_display_cfg.plane.HostVMMaxPageTableLevels; CalculateVMRowAndSwath_params->GPUVMMaxPageTableLevels = mode_lib->ms.cache_display_cfg.plane.GPUVMMaxPageTableLevels; CalculateVMRowAndSwath_params->GPUVMMinPageSizeKBytes = mode_lib->ms.cache_display_cfg.plane.GPUVMMinPageSizeKBytes; - CalculateVMRowAndSwath_params->HostVMMinPageSize = mode_lib->ms.soc.hostvm_min_page_size_kbytes; + CalculateVMRowAndSwath_params->HostVMMinPageSize = mode_lib->ms.soc.hostvm_min_page_size_kbytes * 1024; CalculateVMRowAndSwath_params->PTEBufferModeOverrideEn = mode_lib->ms.cache_display_cfg.plane.PTEBufferModeOverrideEn; CalculateVMRowAndSwath_params->PTEBufferModeOverrideVal = mode_lib->ms.cache_display_cfg.plane.PTEBufferMode; CalculateVMRowAndSwath_params->PTEBufferSizeNotExceeded = mode_lib->ms.PTEBufferSizeNotExceededPerState; @@ -7957,7 +7957,7 @@ dml_bool_t dml_core_mode_support(struct display_mode_lib_st *mode_lib) UseMinimumDCFCLK_params->GPUVMMaxPageTableLevels = mode_lib->ms.cache_display_cfg.plane.GPUVMMaxPageTableLevels; UseMinimumDCFCLK_params->HostVMEnable = mode_lib->ms.cache_display_cfg.plane.HostVMEnable; UseMinimumDCFCLK_params->NumberOfActiveSurfaces = mode_lib->ms.num_active_planes; - UseMinimumDCFCLK_params->HostVMMinPageSize = mode_lib->ms.soc.hostvm_min_page_size_kbytes; + UseMinimumDCFCLK_params->HostVMMinPageSize = mode_lib->ms.soc.hostvm_min_page_size_kbytes * 1024; UseMinimumDCFCLK_params->HostVMMaxNonCachedPageTableLevels = mode_lib->ms.cache_display_cfg.plane.HostVMMaxPageTableLevels; UseMinimumDCFCLK_params->DynamicMetadataVMEnabled = mode_lib->ms.ip.dynamic_metadata_vm_enabled; UseMinimumDCFCLK_params->ImmediateFlipRequirement = s->ImmediateFlipRequiredFinal; @@ -8699,7 +8699,7 @@ void dml_core_mode_programming(struct display_mode_lib_st *mode_lib, const struc CalculateVMRowAndSwath_params->HostVMMaxNonCachedPageTableLevels = mode_lib->ms.cache_display_cfg.plane.HostVMMaxPageTableLevels; CalculateVMRowAndSwath_params->GPUVMMaxPageTableLevels = mode_lib->ms.cache_display_cfg.plane.GPUVMMaxPageTableLevels; CalculateVMRowAndSwath_params->GPUVMMinPageSizeKBytes = mode_lib->ms.cache_display_cfg.plane.GPUVMMinPageSizeKBytes; - CalculateVMRowAndSwath_params->HostVMMinPageSize = mode_lib->ms.soc.hostvm_min_page_size_kbytes; + CalculateVMRowAndSwath_params->HostVMMinPageSize = mode_lib->ms.soc.hostvm_min_page_size_kbytes * 1024; CalculateVMRowAndSwath_params->PTEBufferModeOverrideEn = mode_lib->ms.cache_display_cfg.plane.PTEBufferModeOverrideEn; CalculateVMRowAndSwath_params->PTEBufferModeOverrideVal = mode_lib->ms.cache_display_cfg.plane.PTEBufferMode; CalculateVMRowAndSwath_params->PTEBufferSizeNotExceeded = s->dummy_boolean_array[0]; @@ -8805,7 +8805,7 @@ void dml_core_mode_programming(struct display_mode_lib_st *mode_lib, const struc mode_lib->ms.cache_display_cfg.hw.DPPPerSurface, locals->dpte_group_bytes, s->HostVMInefficiencyFactor, - mode_lib->ms.soc.hostvm_min_page_size_kbytes, + mode_lib->ms.soc.hostvm_min_page_size_kbytes * 1024, mode_lib->ms.cache_display_cfg.plane.HostVMMaxPageTableLevels); locals->TCalc = 24.0 / locals->DCFCLKDeepSleep; @@ -8995,7 +8995,7 @@ void dml_core_mode_programming(struct display_mode_lib_st *mode_lib, const struc CalculatePrefetchSchedule_params->GPUVMEnable = mode_lib->ms.cache_display_cfg.plane.GPUVMEnable; CalculatePrefetchSchedule_params->HostVMEnable = mode_lib->ms.cache_display_cfg.plane.HostVMEnable; CalculatePrefetchSchedule_params->HostVMMaxNonCachedPageTableLevels = mode_lib->ms.cache_display_cfg.plane.HostVMMaxPageTableLevels; - CalculatePrefetchSchedule_params->HostVMMinPageSize = mode_lib->ms.soc.hostvm_min_page_size_kbytes; + CalculatePrefetchSchedule_params->HostVMMinPageSize = mode_lib->ms.soc.hostvm_min_page_size_kbytes * 1024; CalculatePrefetchSchedule_params->DynamicMetadataEnable = mode_lib->ms.cache_display_cfg.plane.DynamicMetadataEnable[k]; CalculatePrefetchSchedule_params->DynamicMetadataVMEnabled = mode_lib->ms.ip.dynamic_metadata_vm_enabled; CalculatePrefetchSchedule_params->DynamicMetadataLinesBeforeActiveRequired = mode_lib->ms.cache_display_cfg.plane.DynamicMetadataLinesBeforeActiveRequired[k]; @@ -9240,7 +9240,7 @@ void dml_core_mode_programming(struct display_mode_lib_st *mode_lib, const struc mode_lib->ms.cache_display_cfg.plane.HostVMEnable, mode_lib->ms.cache_display_cfg.plane.HostVMMaxPageTableLevels, mode_lib->ms.cache_display_cfg.plane.GPUVMEnable, - mode_lib->ms.soc.hostvm_min_page_size_kbytes, + mode_lib->ms.soc.hostvm_min_page_size_kbytes * 1024, locals->PDEAndMetaPTEBytesFrame[k], locals->MetaRowByte[k], locals->PixelPTEBytesPerRow[k], diff --git a/drivers/gpu/drm/amd/display/dc/dml2/dml2_translation_helper.c b/drivers/gpu/drm/amd/display/dc/dml2/dml2_translation_helper.c index 2b9638c6d9b0..48caa34a5ce7 100644 --- a/drivers/gpu/drm/amd/display/dc/dml2/dml2_translation_helper.c +++ b/drivers/gpu/drm/amd/display/dc/dml2/dml2_translation_helper.c @@ -515,8 +515,8 @@ void dml2_translate_socbb_params(const struct dc *in, struct soc_bounding_box_st out->do_urgent_latency_adjustment = in_soc_params->do_urgent_latency_adjustment; out->dram_channel_width_bytes = (dml_uint_t)in_soc_params->dram_channel_width_bytes; out->fabric_datapath_to_dcn_data_return_bytes = (dml_uint_t)in_soc_params->fabric_datapath_to_dcn_data_return_bytes; - out->gpuvm_min_page_size_kbytes = in_soc_params->gpuvm_min_page_size_bytes * 1024; - out->hostvm_min_page_size_kbytes = in_soc_params->hostvm_min_page_size_bytes * 1024; + out->gpuvm_min_page_size_kbytes = in_soc_params->gpuvm_min_page_size_bytes / 1024; + out->hostvm_min_page_size_kbytes = in_soc_params->hostvm_min_page_size_bytes / 1024; out->mall_allocated_for_dcn_mbytes = (dml_uint_t)in_soc_params->mall_allocated_for_dcn_mbytes; out->max_avg_dram_bw_use_normal_percent = in_soc_params->max_avg_dram_bw_use_normal_percent; out->max_avg_fabric_bw_use_normal_percent = in_soc_params->max_avg_fabric_bw_use_normal_percent; -- cgit v1.2.3 From 47831f4860d4e8cdfee4910d2b76ccd892fd72d1 Mon Sep 17 00:00:00 2001 From: Sung Joon Kim Date: Fri, 10 Nov 2023 11:33:45 -0500 Subject: drm/amd/display: Fix black screen on video playback with embedded panel [why] We have dynamic power control in driver but should be ignored when power is forced on. [how] Bypass any power control when it's forced on. Cc: stable@vger.kernel.org Reviewed-by: Nicholas Kazlauskas Acked-by: Hamza Mahfooz Signed-off-by: Sung Joon Kim Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/dc/clk_mgr/dcn35/dcn35_clk_mgr.c | 1 - drivers/gpu/drm/amd/display/dc/dcn35/dcn35_pg_cntl.c | 10 ++++++++++ 2 files changed, 10 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn35/dcn35_clk_mgr.c b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn35/dcn35_clk_mgr.c index 19f8d83698be..63a0b885b6f0 100644 --- a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn35/dcn35_clk_mgr.c +++ b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn35/dcn35_clk_mgr.c @@ -1132,7 +1132,6 @@ void dcn35_clk_mgr_construct( ctx->dc->debug.disable_dpp_power_gate = false; ctx->dc->debug.disable_hubp_power_gate = false; ctx->dc->debug.disable_dsc_power_gate = false; - ctx->dc->debug.disable_hpo_power_gate = false; } else { /*let's reset the config control flag*/ ctx->dc->config.disable_ips = DMUB_IPS_DISABLE_ALL; /*pmfw not support it, disable it all*/ diff --git a/drivers/gpu/drm/amd/display/dc/dcn35/dcn35_pg_cntl.c b/drivers/gpu/drm/amd/display/dc/dcn35/dcn35_pg_cntl.c index 46f71ff08fd1..d19db8e9b8a5 100644 --- a/drivers/gpu/drm/amd/display/dc/dcn35/dcn35_pg_cntl.c +++ b/drivers/gpu/drm/amd/display/dc/dcn35/dcn35_pg_cntl.c @@ -261,6 +261,7 @@ void pg_cntl35_hpo_pg_control(struct pg_cntl *pg_cntl, bool power_on) uint32_t power_gate = power_on ? 0 : 1; uint32_t pwr_status = power_on ? 0 : 2; uint32_t org_ip_request_cntl; + uint32_t power_forceon; bool block_enabled; if (pg_cntl->ctx->dc->debug.ignore_pg || @@ -277,6 +278,10 @@ void pg_cntl35_hpo_pg_control(struct pg_cntl *pg_cntl, bool power_on) return; } + REG_GET(DOMAIN25_PG_CONFIG, DOMAIN_POWER_FORCEON, &power_forceon); + if (power_forceon) + return; + REG_GET(DC_IP_REQUEST_CNTL, IP_REQUEST_EN, &org_ip_request_cntl); if (org_ip_request_cntl == 0) REG_SET(DC_IP_REQUEST_CNTL, 0, IP_REQUEST_EN, 1); @@ -304,6 +309,7 @@ void pg_cntl35_io_clk_pg_control(struct pg_cntl *pg_cntl, bool power_on) uint32_t power_gate = power_on ? 0 : 1; uint32_t pwr_status = power_on ? 0 : 2; uint32_t org_ip_request_cntl; + uint32_t power_forceon; bool block_enabled; if (pg_cntl->ctx->dc->debug.ignore_pg || @@ -319,6 +325,10 @@ void pg_cntl35_io_clk_pg_control(struct pg_cntl *pg_cntl, bool power_on) return; } + REG_GET(DOMAIN22_PG_CONFIG, DOMAIN_POWER_FORCEON, &power_forceon); + if (power_forceon) + return; + REG_GET(DC_IP_REQUEST_CNTL, IP_REQUEST_EN, &org_ip_request_cntl); if (org_ip_request_cntl == 0) REG_SET(DC_IP_REQUEST_CNTL, 0, IP_REQUEST_EN, 1); -- cgit v1.2.3 From b9f46f0b98784e40288ee393f863f553fde062fa Mon Sep 17 00:00:00 2001 From: Hamza Mahfooz Date: Wed, 22 Nov 2023 14:50:34 -0500 Subject: drm/amd/display: fix ABM disablement On recent versions of DMUB firmware, if we want to completely disable ABM we have to pass ABM_LEVEL_IMMEDIATE_DISABLE as the requested ABM level to DMUB. Otherwise, LCD eDP displays are unable to reach their maximum brightness levels. So, to fix this whenever the user requests an ABM level of 0 pass ABM_LEVEL_IMMEDIATE_DISABLE to DMUB instead. Also, to keep the user's experience consistent map ABM_LEVEL_IMMEDIATE_DISABLE to 0 when a user tries to read the requested ABM level. Cc: stable@vger.kernel.org # 6.1+ Reviewed-by: Harry Wentland Signed-off-by: Hamza Mahfooz Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c index ee97814ebd99..b452796fc6d3 100644 --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c @@ -6267,7 +6267,7 @@ int amdgpu_dm_connector_atomic_set_property(struct drm_connector *connector, dm_new_state->underscan_enable = val; ret = 0; } else if (property == adev->mode_info.abm_level_property) { - dm_new_state->abm_level = val; + dm_new_state->abm_level = val ?: ABM_LEVEL_IMMEDIATE_DISABLE; ret = 0; } @@ -6312,7 +6312,8 @@ int amdgpu_dm_connector_atomic_get_property(struct drm_connector *connector, *val = dm_state->underscan_enable; ret = 0; } else if (property == adev->mode_info.abm_level_property) { - *val = dm_state->abm_level; + *val = (dm_state->abm_level != ABM_LEVEL_IMMEDIATE_DISABLE) ? + dm_state->abm_level : 0; ret = 0; } @@ -6385,7 +6386,8 @@ void amdgpu_dm_connector_funcs_reset(struct drm_connector *connector) state->pbn = 0; if (connector->connector_type == DRM_MODE_CONNECTOR_eDP) - state->abm_level = amdgpu_dm_abm_level; + state->abm_level = amdgpu_dm_abm_level ?: + ABM_LEVEL_IMMEDIATE_DISABLE; __drm_atomic_helper_connector_reset(connector, &state->base); } -- cgit v1.2.3 From c92da0403d373c03ea5c65c0260c7db6762013b0 Mon Sep 17 00:00:00 2001 From: Dmytro Laktyushkin Date: Fri, 3 Nov 2023 14:55:37 -0400 Subject: drm/amd/display: update dcn315 lpddr pstate latency [WHY/HOW] Increase the pstate latency to improve ac/dc transition Reviewed-by: Charlene Liu Acked-by: Tom Chung Signed-off-by: Dmytro Laktyushkin Tested-by: Daniel Wheeler Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/dc/clk_mgr/dcn315/dcn315_clk_mgr.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn315/dcn315_clk_mgr.c b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn315/dcn315_clk_mgr.c index b2c4f97afc8b..8776055bbeaa 100644 --- a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn315/dcn315_clk_mgr.c +++ b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn315/dcn315_clk_mgr.c @@ -334,7 +334,7 @@ static struct wm_table lpddr5_wm_table = { { .wm_inst = WM_A, .wm_type = WM_TYPE_PSTATE_CHG, - .pstate_latency_us = 11.65333, + .pstate_latency_us = 129.0, .sr_exit_time_us = 11.5, .sr_enter_plus_exit_time_us = 14.5, .valid = true, @@ -342,7 +342,7 @@ static struct wm_table lpddr5_wm_table = { { .wm_inst = WM_B, .wm_type = WM_TYPE_PSTATE_CHG, - .pstate_latency_us = 11.65333, + .pstate_latency_us = 129.0, .sr_exit_time_us = 11.5, .sr_enter_plus_exit_time_us = 14.5, .valid = true, @@ -350,7 +350,7 @@ static struct wm_table lpddr5_wm_table = { { .wm_inst = WM_C, .wm_type = WM_TYPE_PSTATE_CHG, - .pstate_latency_us = 11.65333, + .pstate_latency_us = 129.0, .sr_exit_time_us = 11.5, .sr_enter_plus_exit_time_us = 14.5, .valid = true, @@ -358,7 +358,7 @@ static struct wm_table lpddr5_wm_table = { { .wm_inst = WM_D, .wm_type = WM_TYPE_PSTATE_CHG, - .pstate_latency_us = 11.65333, + .pstate_latency_us = 129.0, .sr_exit_time_us = 11.5, .sr_enter_plus_exit_time_us = 14.5, .valid = true, -- cgit v1.2.3 From e222b36e9649404cc0770a6d778d69cf73bcd440 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Fri, 10 Nov 2023 09:39:18 -0500 Subject: drm/amdgpu: fix AGP addressing when GART is not at 0 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This worked by luck if the GART aperture ended up at 0. When we ended up moving GART on some chips, the GART aperture ended up offsetting the AGP address since the resource->start is a GART offset, not an MC address. Fix this by moving the AGP address setup into amdgpu_bo_gpu_offset_no_check(). v2: check mem_type before checking agp v3: check if the ttm bo has a ttm_tt allocated yet Fixes: 67318cb84341 ("drm/amdgpu/gmc11: set gart placement GC11") Tested-by: Mario Limonciello Reported-by: Jesse Zhang Reported-by: Yifan Zhang Reviewed-by: Christian König Signed-off-by: Alex Deucher Cc: christian.koenig@amd.com Cc: mario.limonciello@amd.com --- drivers/gpu/drm/amd/amdgpu/amdgpu_gmc.c | 3 +++ drivers/gpu/drm/amd/amdgpu/amdgpu_object.c | 10 +++++++--- drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c | 4 +--- 3 files changed, 11 insertions(+), 6 deletions(-) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_gmc.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_gmc.c index 5f71414190e9..d2f273d77e59 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_gmc.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_gmc.c @@ -181,6 +181,9 @@ uint64_t amdgpu_gmc_agp_addr(struct ttm_buffer_object *bo) { struct amdgpu_device *adev = amdgpu_ttm_adev(bo->bdev); + if (!bo->ttm) + return AMDGPU_BO_INVALID_OFFSET; + if (bo->ttm->num_pages != 1 || bo->ttm->caching == ttm_cached) return AMDGPU_BO_INVALID_OFFSET; diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_object.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_object.c index cef920a93924..d79b4ca1ecfc 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_object.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_object.c @@ -1527,10 +1527,14 @@ u64 amdgpu_bo_gpu_offset(struct amdgpu_bo *bo) u64 amdgpu_bo_gpu_offset_no_check(struct amdgpu_bo *bo) { struct amdgpu_device *adev = amdgpu_ttm_adev(bo->tbo.bdev); - uint64_t offset; + uint64_t offset = AMDGPU_BO_INVALID_OFFSET; - offset = (bo->tbo.resource->start << PAGE_SHIFT) + - amdgpu_ttm_domain_start(adev, bo->tbo.resource->mem_type); + if (bo->tbo.resource->mem_type == TTM_PL_TT) + offset = amdgpu_gmc_agp_addr(&bo->tbo); + + if (offset == AMDGPU_BO_INVALID_OFFSET) + offset = (bo->tbo.resource->start << PAGE_SHIFT) + + amdgpu_ttm_domain_start(adev, bo->tbo.resource->mem_type); return amdgpu_gmc_sign_extend(offset); } diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c index 05991c5c8ddb..ab4a762aed5b 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c @@ -959,10 +959,8 @@ int amdgpu_ttm_alloc_gart(struct ttm_buffer_object *bo) return 0; addr = amdgpu_gmc_agp_addr(bo); - if (addr != AMDGPU_BO_INVALID_OFFSET) { - bo->resource->start = addr >> PAGE_SHIFT; + if (addr != AMDGPU_BO_INVALID_OFFSET) return 0; - } /* allocate GART space */ placement.num_placement = 1; -- cgit v1.2.3 From 7a88f23e768491bae653b444a96091d2aaeb0818 Mon Sep 17 00:00:00 2001 From: Dinghao Liu Date: Thu, 23 Nov 2023 15:33:22 +0800 Subject: drm/amd/pm: fix a memleak in aldebaran_tables_init When kzalloc() for smu_table->ecc_table fails, we should free the previously allocated resources to prevent memleak. Fixes: edd794208555 ("drm/amd/pm: add message smu to get ecc_table v2") Signed-off-by: Dinghao Liu Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/pm/swsmu/smu13/aldebaran_ppt.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/amd/pm/swsmu/smu13/aldebaran_ppt.c b/drivers/gpu/drm/amd/pm/swsmu/smu13/aldebaran_ppt.c index 1a6675d70a4b..f1440869d1ce 100644 --- a/drivers/gpu/drm/amd/pm/swsmu/smu13/aldebaran_ppt.c +++ b/drivers/gpu/drm/amd/pm/swsmu/smu13/aldebaran_ppt.c @@ -257,8 +257,11 @@ static int aldebaran_tables_init(struct smu_context *smu) } smu_table->ecc_table = kzalloc(tables[SMU_TABLE_ECCINFO].size, GFP_KERNEL); - if (!smu_table->ecc_table) + if (!smu_table->ecc_table) { + kfree(smu_table->metrics_table); + kfree(smu_table->gpu_metrics_table); return -ENOMEM; + } return 0; } -- cgit v1.2.3 From 6967741d26c87300a51b5e50d4acd104bc1a9759 Mon Sep 17 00:00:00 2001 From: Mario Limonciello Date: Fri, 24 Nov 2023 09:56:32 -0600 Subject: drm/amd: Enable PCIe PME from D3 When dGPU is put into BOCO it may be in D3cold but still able send PME on display hotplug event. For this to work it must be enabled as wake source from D3. When runpm is enabled use pci_wake_from_d3() to mark wakeup as enabled by default. Cc: stable@vger.kernel.org # 6.1+ Signed-off-by: Mario Limonciello Acked-by: Alex Deucher Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c index 8f24cabe2155..8b33b130ea36 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c @@ -2263,6 +2263,8 @@ retry_init: pm_runtime_mark_last_busy(ddev->dev); pm_runtime_put_autosuspend(ddev->dev); + pci_wake_from_d3(pdev, TRUE); + /* * For runpm implemented via BACO, PMFW will handle the * timing for BACO in and out: -- cgit v1.2.3 From 2161e09cd05a50d80736fe397145340d2e8f6c05 Mon Sep 17 00:00:00 2001 From: Lu Yao Date: Thu, 23 Nov 2023 09:22:34 +0800 Subject: drm/amdgpu: Fix cat debugfs amdgpu_regs_didt causes kernel null pointer MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit For 'AMDGPU_FAMILY_SI' family cards, in 'si_common_early_init' func, init 'didt_rreg' and 'didt_wreg' to 'NULL'. But in func 'amdgpu_debugfs_regs_didt_read/write', using 'RREG32_DIDT' 'WREG32_DIDT' lacks of relevant judgment. And other 'amdgpu_ip_block_version' that use these two definitions won't be added for 'AMDGPU_FAMILY_SI'. So, add null pointer judgment before calling. Reviewed-by: Christian König Signed-off-by: Lu Yao Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c index a53f436fa9f1..0e61ebdb3f3e 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c @@ -638,6 +638,9 @@ static ssize_t amdgpu_debugfs_regs_didt_read(struct file *f, char __user *buf, if (size & 0x3 || *pos & 0x3) return -EINVAL; + if (!adev->didt_rreg) + return -EOPNOTSUPP; + r = pm_runtime_get_sync(adev_to_drm(adev)->dev); if (r < 0) { pm_runtime_put_autosuspend(adev_to_drm(adev)->dev); @@ -694,6 +697,9 @@ static ssize_t amdgpu_debugfs_regs_didt_write(struct file *f, const char __user if (size & 0x3 || *pos & 0x3) return -EINVAL; + if (!adev->didt_wreg) + return -EOPNOTSUPP; + r = pm_runtime_get_sync(adev_to_drm(adev)->dev); if (r < 0) { pm_runtime_put_autosuspend(adev_to_drm(adev)->dev); -- cgit v1.2.3 From 27750e176a4f8549e13fa91f311b29a2e40d47be Mon Sep 17 00:00:00 2001 From: Nicholas Kazlauskas Date: Tue, 14 Nov 2023 11:22:09 -0500 Subject: drm/amd/display: Allow DTBCLK disable for DCN35 [Why] DTBCLK is enabled on idle and it will burn power. [How] There's a few issues here: - Always enabling DTBCLK on clock manager init - Setting refclk when DTBCLK is supposed to be disabled - Not applying the correct calculated version refclk, but instead the base value which might be zero On dtbclk_en change we'll message PMFW to enable or disable the clock accordingly. The DTBDTO will be then based on refclk, but it will be set to the default fixed value if there was nothing calculated in DML despite the clock being considered enabled. Reviewed-by: Charlene Liu Acked-by: Tom Chung Signed-off-by: Nicholas Kazlauskas Tested-by: Daniel Wheeler Signed-off-by: Alex Deucher --- .../amd/display/dc/clk_mgr/dcn35/dcn35_clk_mgr.c | 27 ++++++++++------------ 1 file changed, 12 insertions(+), 15 deletions(-) diff --git a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn35/dcn35_clk_mgr.c b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn35/dcn35_clk_mgr.c index 63a0b885b6f0..d5fde7d23fbf 100644 --- a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn35/dcn35_clk_mgr.c +++ b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn35/dcn35_clk_mgr.c @@ -232,6 +232,10 @@ void dcn35_update_clocks(struct clk_mgr *clk_mgr_base, if (dc->work_arounds.skip_clock_update) return; + /* DTBCLK is fixed, so set a default if unspecified. */ + if (new_clocks->dtbclk_en && !new_clocks->ref_dtbclk_khz) + new_clocks->ref_dtbclk_khz = 600000; + /* * if it is safe to lower, but we are already in the lower state, we don't have to do anything * also if safe to lower is false, we just go in the higher state @@ -265,8 +269,10 @@ void dcn35_update_clocks(struct clk_mgr *clk_mgr_base, if (!clk_mgr_base->clks.dtbclk_en && new_clocks->dtbclk_en) { dcn35_smu_set_dtbclk(clk_mgr, true); - dcn35_update_clocks_update_dtb_dto(clk_mgr, context, clk_mgr_base->clks.ref_dtbclk_khz); clk_mgr_base->clks.dtbclk_en = new_clocks->dtbclk_en; + + dcn35_update_clocks_update_dtb_dto(clk_mgr, context, new_clocks->ref_dtbclk_khz); + clk_mgr_base->clks.ref_dtbclk_khz = new_clocks->ref_dtbclk_khz; } /* check that we're not already in D0 */ @@ -314,17 +320,12 @@ void dcn35_update_clocks(struct clk_mgr *clk_mgr_base, update_dispclk = true; } - if (!new_clocks->dtbclk_en) { - new_clocks->ref_dtbclk_khz = 600000; - } - /* clock limits are received with MHz precision, divide by 1000 to prevent setting clocks at every call */ if (!dc->debug.disable_dtb_ref_clk_switch && - should_set_clock(safe_to_lower, new_clocks->ref_dtbclk_khz / 1000, clk_mgr_base->clks.ref_dtbclk_khz / 1000)) { - /* DCCG requires KHz precision for DTBCLK */ - dcn35_smu_set_dtbclk(clk_mgr, true); - - dcn35_update_clocks_update_dtb_dto(clk_mgr, context, clk_mgr_base->clks.ref_dtbclk_khz); + should_set_clock(safe_to_lower, new_clocks->ref_dtbclk_khz / 1000, + clk_mgr_base->clks.ref_dtbclk_khz / 1000)) { + dcn35_update_clocks_update_dtb_dto(clk_mgr, context, new_clocks->ref_dtbclk_khz); + clk_mgr_base->clks.ref_dtbclk_khz = new_clocks->ref_dtbclk_khz; } if (dpp_clock_lowered) { @@ -1048,12 +1049,8 @@ void dcn35_clk_mgr_construct( dcn35_dump_clk_registers(&clk_mgr->base.base.boot_snapshot, &clk_mgr->base.base, &log_info); clk_mgr->base.base.dprefclk_khz = dcn35_smu_get_dprefclk(&clk_mgr->base); - clk_mgr->base.base.clks.ref_dtbclk_khz = dcn35_smu_get_dtbclk(&clk_mgr->base); - - if (!clk_mgr->base.base.clks.ref_dtbclk_khz) - dcn35_smu_set_dtbclk(&clk_mgr->base, true); + clk_mgr->base.base.clks.ref_dtbclk_khz = 600000; - clk_mgr->base.base.clks.dtbclk_en = true; dce_clock_read_ss_info(&clk_mgr->base); /*when clk src is from FCH, it could have ss, same clock src as DPREF clk*/ -- cgit v1.2.3 From e0409021e34af50e7b6f31635c8d21583d7c43dd Mon Sep 17 00:00:00 2001 From: Candice Li Date: Fri, 24 Nov 2023 09:33:47 +0800 Subject: drm/amdgpu: Update EEPROM I2C address for smu v13_0_0 Check smu v13_0_0 SKU type to select EEPROM I2C address. Signed-off-by: Candice Li Reviewed-by: Hawking Zhang Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org # 6.1.x --- drivers/gpu/drm/amd/amdgpu/amdgpu_ras_eeprom.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_ras_eeprom.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_ras_eeprom.c index 65aa218380be..2fde93b00cab 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_ras_eeprom.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_ras_eeprom.c @@ -214,6 +214,12 @@ static bool __get_eeprom_i2c_addr(struct amdgpu_device *adev, control->i2c_address = EEPROM_I2C_MADDR_0; return true; case IP_VERSION(13, 0, 0): + if (strnstr(atom_ctx->vbios_pn, "D707", + sizeof(atom_ctx->vbios_pn))) + control->i2c_address = EEPROM_I2C_MADDR_0; + else + control->i2c_address = EEPROM_I2C_MADDR_4; + return true; case IP_VERSION(13, 0, 6): case IP_VERSION(13, 0, 10): control->i2c_address = EEPROM_I2C_MADDR_4; -- cgit v1.2.3 From 72838777aa38352e20301e123b97110c456cd38e Mon Sep 17 00:00:00 2001 From: ZhenGuo Yin Date: Mon, 6 Nov 2023 18:07:51 +0800 Subject: drm/amdkfd: Free gang_ctx_bo and wptr_bo in pqm_uninit [Why] Memory leaks of gang_ctx_bo and wptr_bo. [How] Free gang_ctx_bo and wptr_bo in pqm_uninit. v2: add a common function pqm_clean_queue_resource to free queue's resources. v3: reset pdd->pqd.num_gws when destorying GWS queue. Reviewed-by: Felix Kuehling Signed-off-by: ZhenGuo Yin Signed-off-by: Alex Deucher --- .../gpu/drm/amd/amdkfd/kfd_process_queue_manager.c | 54 +++++++++++++--------- 1 file changed, 33 insertions(+), 21 deletions(-) diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_process_queue_manager.c b/drivers/gpu/drm/amd/amdkfd/kfd_process_queue_manager.c index 77649392e233..77f493262e05 100644 --- a/drivers/gpu/drm/amd/amdkfd/kfd_process_queue_manager.c +++ b/drivers/gpu/drm/amd/amdkfd/kfd_process_queue_manager.c @@ -169,16 +169,43 @@ int pqm_init(struct process_queue_manager *pqm, struct kfd_process *p) return 0; } +static void pqm_clean_queue_resource(struct process_queue_manager *pqm, + struct process_queue_node *pqn) +{ + struct kfd_node *dev; + struct kfd_process_device *pdd; + + dev = pqn->q->device; + + pdd = kfd_get_process_device_data(dev, pqm->process); + if (!pdd) { + pr_err("Process device data doesn't exist\n"); + return; + } + + if (pqn->q->gws) { + if (KFD_GC_VERSION(pqn->q->device) != IP_VERSION(9, 4, 3) && + !dev->kfd->shared_resources.enable_mes) + amdgpu_amdkfd_remove_gws_from_process( + pqm->process->kgd_process_info, pqn->q->gws); + pdd->qpd.num_gws = 0; + } + + if (dev->kfd->shared_resources.enable_mes) { + amdgpu_amdkfd_free_gtt_mem(dev->adev, pqn->q->gang_ctx_bo); + if (pqn->q->wptr_bo) + amdgpu_amdkfd_free_gtt_mem(dev->adev, pqn->q->wptr_bo); + } +} + void pqm_uninit(struct process_queue_manager *pqm) { struct process_queue_node *pqn, *next; list_for_each_entry_safe(pqn, next, &pqm->queues, process_queue_list) { - if (pqn->q && pqn->q->gws && - KFD_GC_VERSION(pqn->q->device) != IP_VERSION(9, 4, 3) && - !pqn->q->device->kfd->shared_resources.enable_mes) - amdgpu_amdkfd_remove_gws_from_process(pqm->process->kgd_process_info, - pqn->q->gws); + if (pqn->q) + pqm_clean_queue_resource(pqm, pqn); + kfd_procfs_del_queue(pqn->q); uninit_queue(pqn->q); list_del(&pqn->process_queue_list); @@ -461,22 +488,7 @@ int pqm_destroy_queue(struct process_queue_manager *pqm, unsigned int qid) goto err_destroy_queue; } - if (pqn->q->gws) { - if (KFD_GC_VERSION(pqn->q->device) != IP_VERSION(9, 4, 3) && - !dev->kfd->shared_resources.enable_mes) - amdgpu_amdkfd_remove_gws_from_process( - pqm->process->kgd_process_info, - pqn->q->gws); - pdd->qpd.num_gws = 0; - } - - if (dev->kfd->shared_resources.enable_mes) { - amdgpu_amdkfd_free_gtt_mem(dev->adev, - pqn->q->gang_ctx_bo); - if (pqn->q->wptr_bo) - amdgpu_amdkfd_free_gtt_mem(dev->adev, pqn->q->wptr_bo); - - } + pqm_clean_queue_resource(pqm, pqn); uninit_queue(pqn->q); } -- cgit v1.2.3 From a2ab248d94f5af2c609c8c3329875f92324782c5 Mon Sep 17 00:00:00 2001 From: Taimur Hassan Date: Fri, 10 Nov 2023 10:24:20 -0500 Subject: drm/amd/display: Fix some HostVM parameters in DML [Why] A number of DML parameters related to HostVM were either missing or being set incorrectly, which may cause inaccuracies in calculating margins and determining BW limitations. [How] Correct these values where needed and populate the missing values. Cc: stable@vger.kernel.org Reviewed-by: Nicholas Kazlauskas Acked-by: Hamza Mahfooz Signed-off-by: Taimur Hassan Signed-off-by: Roman Li Tested-by: Daniel Wheeler Signed-off-by: Alex Deucher --- .../gpu/drm/amd/display/dc/dml/dcn35/dcn35_fpu.c | 33 ++++++++++++++++++++++ .../amd/display/dc/dml2/dml2_translation_helper.c | 9 ++++-- 2 files changed, 39 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/amd/display/dc/dml/dcn35/dcn35_fpu.c b/drivers/gpu/drm/amd/display/dc/dml/dcn35/dcn35_fpu.c index 21c17d3296a3..39cf1ae3a3e1 100644 --- a/drivers/gpu/drm/amd/display/dc/dml/dcn35/dcn35_fpu.c +++ b/drivers/gpu/drm/amd/display/dc/dml/dcn35/dcn35_fpu.c @@ -330,6 +330,39 @@ void dcn35_update_bw_bounding_box_fpu(struct dc *dc, dml_init_instance(&dc->dml, &dcn3_5_soc, &dcn3_5_ip, DML_PROJECT_DCN31); + /*copy to dml2, before dml2_create*/ + if (clk_table->num_entries > 2) { + + for (i = 0; i < clk_table->num_entries; i++) { + dc->dml2_options.bbox_overrides.clks_table.num_states = + clk_table->num_entries; + dc->dml2_options.bbox_overrides.clks_table.clk_entries[i].dcfclk_mhz = + clock_limits[i].dcfclk_mhz; + dc->dml2_options.bbox_overrides.clks_table.clk_entries[i].fclk_mhz = + clock_limits[i].fabricclk_mhz; + dc->dml2_options.bbox_overrides.clks_table.clk_entries[i].dispclk_mhz = + clock_limits[i].dispclk_mhz; + dc->dml2_options.bbox_overrides.clks_table.clk_entries[i].dppclk_mhz = + clock_limits[i].dppclk_mhz; + dc->dml2_options.bbox_overrides.clks_table.clk_entries[i].socclk_mhz = + clock_limits[i].socclk_mhz; + dc->dml2_options.bbox_overrides.clks_table.clk_entries[i].memclk_mhz = + clk_table->entries[i].memclk_mhz * clk_table->entries[i].wck_ratio; + dc->dml2_options.bbox_overrides.clks_table.num_entries_per_clk.num_dcfclk_levels = + clk_table->num_entries; + dc->dml2_options.bbox_overrides.clks_table.num_entries_per_clk.num_fclk_levels = + clk_table->num_entries; + dc->dml2_options.bbox_overrides.clks_table.num_entries_per_clk.num_dispclk_levels = + clk_table->num_entries; + dc->dml2_options.bbox_overrides.clks_table.num_entries_per_clk.num_dppclk_levels = + clk_table->num_entries; + dc->dml2_options.bbox_overrides.clks_table.num_entries_per_clk.num_socclk_levels = + clk_table->num_entries; + dc->dml2_options.bbox_overrides.clks_table.num_entries_per_clk.num_memclk_levels = + clk_table->num_entries; + } + } + /* Update latency values */ dc->dml2_options.bbox_overrides.dram_clock_change_latency_us = dcn3_5_soc.dram_clock_change_latency_us; diff --git a/drivers/gpu/drm/amd/display/dc/dml2/dml2_translation_helper.c b/drivers/gpu/drm/amd/display/dc/dml2/dml2_translation_helper.c index 48caa34a5ce7..fa8fe5bf7e57 100644 --- a/drivers/gpu/drm/amd/display/dc/dml2/dml2_translation_helper.c +++ b/drivers/gpu/drm/amd/display/dc/dml2/dml2_translation_helper.c @@ -1057,9 +1057,12 @@ void map_dc_state_into_dml_display_cfg(struct dml2_context *dml2, struct dc_stat } //Generally these are set by referencing our latest BB/IP params in dcn32_resource.c file - dml_dispcfg->plane.GPUVMEnable = true; - dml_dispcfg->plane.GPUVMMaxPageTableLevels = 4; - dml_dispcfg->plane.HostVMEnable = false; + dml_dispcfg->plane.GPUVMEnable = dml2->v20.dml_core_ctx.ip.gpuvm_enable; + dml_dispcfg->plane.GPUVMMaxPageTableLevels = dml2->v20.dml_core_ctx.ip.gpuvm_max_page_table_levels; + dml_dispcfg->plane.HostVMEnable = dml2->v20.dml_core_ctx.ip.hostvm_enable; + dml_dispcfg->plane.HostVMMaxPageTableLevels = dml2->v20.dml_core_ctx.ip.hostvm_max_page_table_levels; + if (dml2->v20.dml_core_ctx.ip.hostvm_enable) + dml2->v20.dml_core_ctx.policy.AllowForPStateChangeOrStutterInVBlankFinal = dml_prefetch_support_uclk_fclk_and_stutter; dml2_populate_pipe_to_plane_index_mapping(dml2, context); -- cgit v1.2.3 From ed6e4f0a27ebafffbd12bf3878ab004787685d8a Mon Sep 17 00:00:00 2001 From: Lijo Lazar Date: Tue, 28 Nov 2023 16:47:14 +0530 Subject: drm/amdgpu: Use another offset for GC 9.4.3 remap The legacy region at 0x7F000 maps to valid registers in GC 9.4.3 SOCs. Use 0x1A000 offset instead as MMIO register remap region. Signed-off-by: Lijo Lazar Reviewed-by: Hawking Zhang Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/soc15.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/gpu/drm/amd/amdgpu/soc15.c b/drivers/gpu/drm/amd/amdgpu/soc15.c index d4b8d62f4294..c82776e5e9aa 100644 --- a/drivers/gpu/drm/amd/amdgpu/soc15.c +++ b/drivers/gpu/drm/amd/amdgpu/soc15.c @@ -1161,6 +1161,11 @@ static int soc15_common_early_init(void *handle) AMD_PG_SUPPORT_VCN_DPG | AMD_PG_SUPPORT_JPEG; adev->external_rev_id = adev->rev_id + 0x46; + /* GC 9.4.3 uses MMIO register region hole at a different offset */ + if (!amdgpu_sriov_vf(adev)) { + adev->rmmio_remap.reg_offset = 0x1A000; + adev->rmmio_remap.bus_addr = adev->rmmio_base + 0x1A000; + } break; default: /* FIXME: not supported yet */ -- cgit v1.2.3 From 8866730aed5100f06d3d965c22f1c61f74942541 Mon Sep 17 00:00:00 2001 From: John Fastabend Date: Tue, 28 Nov 2023 17:25:56 -0800 Subject: bpf, sockmap: af_unix stream sockets need to hold ref for pair sock AF_UNIX stream sockets are a paired socket. So sending on one of the pairs will lookup the paired socket as part of the send operation. It is possible however to put just one of the pairs in a BPF map. This currently increments the refcnt on the sock in the sockmap to ensure it is not free'd by the stack before sockmap cleans up its state and stops any skbs being sent/recv'd to that socket. But we missed a case. If the peer socket is closed it will be free'd by the stack. However, the paired socket can still be referenced from BPF sockmap side because we hold a reference there. Then if we are sending traffic through BPF sockmap to that socket it will try to dereference the free'd pair in its send logic creating a use after free. And following splat: [59.900375] BUG: KASAN: slab-use-after-free in sk_wake_async+0x31/0x1b0 [59.901211] Read of size 8 at addr ffff88811acbf060 by task kworker/1:2/954 [...] [59.905468] Call Trace: [59.905787] [59.906066] dump_stack_lvl+0x130/0x1d0 [59.908877] print_report+0x16f/0x740 [59.910629] kasan_report+0x118/0x160 [59.912576] sk_wake_async+0x31/0x1b0 [59.913554] sock_def_readable+0x156/0x2a0 [59.914060] unix_stream_sendmsg+0x3f9/0x12a0 [59.916398] sock_sendmsg+0x20e/0x250 [59.916854] skb_send_sock+0x236/0xac0 [59.920527] sk_psock_backlog+0x287/0xaa0 To fix let BPF sockmap hold a refcnt on both the socket in the sockmap and its paired socket. It wasn't obvious how to contain the fix to bpf_unix logic. The primarily problem with keeping this logic in bpf_unix was: In the sock close() we could handle the deref by having a close handler. But, when we are destroying the psock through a map delete operation we wouldn't have gotten any signal thorugh the proto struct other than it being replaced. If we do the deref from the proto replace its too early because we need to deref the sk_pair after the backlog worker has been stopped. Given all this it seems best to just cache it at the end of the psock and eat 8B for the af_unix and vsock users. Notice dgram sockets are OK because they handle locking already. Fixes: 94531cfcbe79 ("af_unix: Add unix_stream_proto for sockmap") Signed-off-by: John Fastabend Signed-off-by: Daniel Borkmann Reviewed-by: Jakub Sitnicki Link: https://lore.kernel.org/bpf/20231129012557.95371-2-john.fastabend@gmail.com --- include/linux/skmsg.h | 1 + include/net/af_unix.h | 1 + net/core/skmsg.c | 2 ++ net/unix/af_unix.c | 2 -- net/unix/unix_bpf.c | 5 +++++ 5 files changed, 9 insertions(+), 2 deletions(-) diff --git a/include/linux/skmsg.h b/include/linux/skmsg.h index c1637515a8a4..c953b8c0d2f4 100644 --- a/include/linux/skmsg.h +++ b/include/linux/skmsg.h @@ -106,6 +106,7 @@ struct sk_psock { struct mutex work_mutex; struct sk_psock_work_state work_state; struct delayed_work work; + struct sock *sk_pair; struct rcu_work rwork; }; diff --git a/include/net/af_unix.h b/include/net/af_unix.h index 824c258143a3..49c4640027d8 100644 --- a/include/net/af_unix.h +++ b/include/net/af_unix.h @@ -75,6 +75,7 @@ struct unix_sock { }; #define unix_sk(ptr) container_of_const(ptr, struct unix_sock, sk) +#define unix_peer(sk) (unix_sk(sk)->peer) #define peer_wait peer_wq.wait diff --git a/net/core/skmsg.c b/net/core/skmsg.c index 6c31eefbd777..93ecfceac1bc 100644 --- a/net/core/skmsg.c +++ b/net/core/skmsg.c @@ -826,6 +826,8 @@ static void sk_psock_destroy(struct work_struct *work) if (psock->sk_redir) sock_put(psock->sk_redir); + if (psock->sk_pair) + sock_put(psock->sk_pair); sock_put(psock->sk); kfree(psock); } diff --git a/net/unix/af_unix.c b/net/unix/af_unix.c index a357dc5f2404..ac1f2bc18fc9 100644 --- a/net/unix/af_unix.c +++ b/net/unix/af_unix.c @@ -213,8 +213,6 @@ static inline bool unix_secdata_eq(struct scm_cookie *scm, struct sk_buff *skb) } #endif /* CONFIG_SECURITY_NETWORK */ -#define unix_peer(sk) (unix_sk(sk)->peer) - static inline int unix_our_peer(struct sock *sk, struct sock *osk) { return unix_peer(osk) == sk; diff --git a/net/unix/unix_bpf.c b/net/unix/unix_bpf.c index 2f9d8271c6ec..7ea7c3a0d0d0 100644 --- a/net/unix/unix_bpf.c +++ b/net/unix/unix_bpf.c @@ -159,12 +159,17 @@ int unix_dgram_bpf_update_proto(struct sock *sk, struct sk_psock *psock, bool re int unix_stream_bpf_update_proto(struct sock *sk, struct sk_psock *psock, bool restore) { + struct sock *sk_pair; + if (restore) { sk->sk_write_space = psock->saved_write_space; sock_replace_proto(sk, psock->sk_proto); return 0; } + sk_pair = unix_peer(sk); + sock_hold(sk_pair); + psock->sk_pair = sk_pair; unix_stream_bpf_check_needs_rebuild(psock->sk_proto); sock_replace_proto(sk, &unix_stream_bpf_prot); return 0; -- cgit v1.2.3 From 51354f700d400e55b329361e1386b04695e6e5c1 Mon Sep 17 00:00:00 2001 From: John Fastabend Date: Tue, 28 Nov 2023 17:25:57 -0800 Subject: bpf, sockmap: Add af_unix test with both sockets in map This adds a test where both pairs of a af_unix paired socket are put into a BPF map. This ensures that when we tear down the af_unix pair we don't have any issues on sockmap side with ordering and reference counting. Signed-off-by: John Fastabend Signed-off-by: Daniel Borkmann Reviewed-by: Jakub Sitnicki Link: https://lore.kernel.org/bpf/20231129012557.95371-3-john.fastabend@gmail.com --- .../selftests/bpf/prog_tests/sockmap_listen.c | 51 +++++++++++++++++----- .../selftests/bpf/progs/test_sockmap_listen.c | 7 +++ 2 files changed, 47 insertions(+), 11 deletions(-) diff --git a/tools/testing/selftests/bpf/prog_tests/sockmap_listen.c b/tools/testing/selftests/bpf/prog_tests/sockmap_listen.c index a934d430c20c..a92807bfcd13 100644 --- a/tools/testing/selftests/bpf/prog_tests/sockmap_listen.c +++ b/tools/testing/selftests/bpf/prog_tests/sockmap_listen.c @@ -1337,7 +1337,8 @@ static void test_redir(struct test_sockmap_listen *skel, struct bpf_map *map, } static void pairs_redir_to_connected(int cli0, int peer0, int cli1, int peer1, - int sock_mapfd, int verd_mapfd, enum redir_mode mode) + int sock_mapfd, int nop_mapfd, + int verd_mapfd, enum redir_mode mode) { const char *log_prefix = redir_mode_str(mode); unsigned int pass; @@ -1351,6 +1352,12 @@ static void pairs_redir_to_connected(int cli0, int peer0, int cli1, int peer1, if (err) return; + if (nop_mapfd >= 0) { + err = add_to_sockmap(nop_mapfd, cli0, cli1); + if (err) + return; + } + n = write(cli1, "a", 1); if (n < 0) FAIL_ERRNO("%s: write", log_prefix); @@ -1387,7 +1394,7 @@ static void unix_redir_to_connected(int sotype, int sock_mapfd, goto close0; c1 = sfd[0], p1 = sfd[1]; - pairs_redir_to_connected(c0, p0, c1, p1, sock_mapfd, verd_mapfd, mode); + pairs_redir_to_connected(c0, p0, c1, p1, sock_mapfd, -1, verd_mapfd, mode); xclose(c1); xclose(p1); @@ -1677,7 +1684,7 @@ static void udp_redir_to_connected(int family, int sock_mapfd, int verd_mapfd, if (err) goto close_cli0; - pairs_redir_to_connected(c0, p0, c1, p1, sock_mapfd, verd_mapfd, mode); + pairs_redir_to_connected(c0, p0, c1, p1, sock_mapfd, -1, verd_mapfd, mode); xclose(c1); xclose(p1); @@ -1735,7 +1742,7 @@ static void inet_unix_redir_to_connected(int family, int type, int sock_mapfd, if (err) goto close; - pairs_redir_to_connected(c0, p0, c1, p1, sock_mapfd, verd_mapfd, mode); + pairs_redir_to_connected(c0, p0, c1, p1, sock_mapfd, -1, verd_mapfd, mode); xclose(c1); xclose(p1); @@ -1770,8 +1777,10 @@ static void inet_unix_skb_redir_to_connected(struct test_sockmap_listen *skel, xbpf_prog_detach2(verdict, sock_map, BPF_SK_SKB_VERDICT); } -static void unix_inet_redir_to_connected(int family, int type, int sock_mapfd, - int verd_mapfd, enum redir_mode mode) +static void unix_inet_redir_to_connected(int family, int type, + int sock_mapfd, int nop_mapfd, + int verd_mapfd, + enum redir_mode mode) { int c0, c1, p0, p1; int sfd[2]; @@ -1785,7 +1794,8 @@ static void unix_inet_redir_to_connected(int family, int type, int sock_mapfd, goto close_cli0; c1 = sfd[0], p1 = sfd[1]; - pairs_redir_to_connected(c0, p0, c1, p1, sock_mapfd, verd_mapfd, mode); + pairs_redir_to_connected(c0, p0, c1, p1, + sock_mapfd, nop_mapfd, verd_mapfd, mode); xclose(c1); xclose(p1); @@ -1799,6 +1809,7 @@ static void unix_inet_skb_redir_to_connected(struct test_sockmap_listen *skel, struct bpf_map *inner_map, int family) { int verdict = bpf_program__fd(skel->progs.prog_skb_verdict); + int nop_map = bpf_map__fd(skel->maps.nop_map); int verdict_map = bpf_map__fd(skel->maps.verdict_map); int sock_map = bpf_map__fd(inner_map); int err; @@ -1808,14 +1819,32 @@ static void unix_inet_skb_redir_to_connected(struct test_sockmap_listen *skel, return; skel->bss->test_ingress = false; - unix_inet_redir_to_connected(family, SOCK_DGRAM, sock_map, verdict_map, + unix_inet_redir_to_connected(family, SOCK_DGRAM, + sock_map, -1, verdict_map, REDIR_EGRESS); - unix_inet_redir_to_connected(family, SOCK_STREAM, sock_map, verdict_map, + unix_inet_redir_to_connected(family, SOCK_DGRAM, + sock_map, -1, verdict_map, + REDIR_EGRESS); + + unix_inet_redir_to_connected(family, SOCK_DGRAM, + sock_map, nop_map, verdict_map, + REDIR_EGRESS); + unix_inet_redir_to_connected(family, SOCK_STREAM, + sock_map, nop_map, verdict_map, REDIR_EGRESS); skel->bss->test_ingress = true; - unix_inet_redir_to_connected(family, SOCK_DGRAM, sock_map, verdict_map, + unix_inet_redir_to_connected(family, SOCK_DGRAM, + sock_map, -1, verdict_map, + REDIR_INGRESS); + unix_inet_redir_to_connected(family, SOCK_STREAM, + sock_map, -1, verdict_map, + REDIR_INGRESS); + + unix_inet_redir_to_connected(family, SOCK_DGRAM, + sock_map, nop_map, verdict_map, REDIR_INGRESS); - unix_inet_redir_to_connected(family, SOCK_STREAM, sock_map, verdict_map, + unix_inet_redir_to_connected(family, SOCK_STREAM, + sock_map, nop_map, verdict_map, REDIR_INGRESS); xbpf_prog_detach2(verdict, sock_map, BPF_SK_SKB_VERDICT); diff --git a/tools/testing/selftests/bpf/progs/test_sockmap_listen.c b/tools/testing/selftests/bpf/progs/test_sockmap_listen.c index 464d35bd57c7..b7250eb9c30c 100644 --- a/tools/testing/selftests/bpf/progs/test_sockmap_listen.c +++ b/tools/testing/selftests/bpf/progs/test_sockmap_listen.c @@ -14,6 +14,13 @@ struct { __type(value, __u64); } sock_map SEC(".maps"); +struct { + __uint(type, BPF_MAP_TYPE_SOCKMAP); + __uint(max_entries, 2); + __type(key, __u32); + __type(value, __u64); +} nop_map SEC(".maps"); + struct { __uint(type, BPF_MAP_TYPE_SOCKHASH); __uint(max_entries, 2); -- cgit v1.2.3 From 88a2b4d34a64bba914c4e245c6de3ca42bea93cf Mon Sep 17 00:00:00 2001 From: Timur Tabi Date: Wed, 22 Nov 2023 14:28:40 -0600 Subject: nouveau/gsp: document some aspects of GSP-RM Document a few aspects of communication with GSP-RM. These comments are derived from notes made during early development of GSP-RM support in Nouveau, but were not included in the initial patch set. Reviewed-by: Dave Airlie Signed-off-by: Timur Tabi Reviewed-by: Danilo Krummrich Signed-off-by: Danilo Krummrich Link: https://patchwork.freedesktop.org/patch/msgid/20231122202840.2565153-1-ttabi@nvidia.com --- .../common/shared/msgq/inc/msgq/msgq_priv.h | 51 ++++++++++++++ drivers/gpu/drm/nouveau/nvkm/subdev/gsp/r535.c | 82 ++++++++++++++++++++++ 2 files changed, 133 insertions(+) diff --git a/drivers/gpu/drm/nouveau/include/nvrm/535.113.01/common/shared/msgq/inc/msgq/msgq_priv.h b/drivers/gpu/drm/nouveau/include/nvrm/535.113.01/common/shared/msgq/inc/msgq/msgq_priv.h index 5a2f273d95c8..0e32e71e123f 100644 --- a/drivers/gpu/drm/nouveau/include/nvrm/535.113.01/common/shared/msgq/inc/msgq/msgq_priv.h +++ b/drivers/gpu/drm/nouveau/include/nvrm/535.113.01/common/shared/msgq/inc/msgq/msgq_priv.h @@ -26,6 +26,49 @@ * DEALINGS IN THE SOFTWARE. */ +/** + * msgqTxHeader -- TX queue data structure + * @version: the version of this structure, must be 0 + * @size: the size of the entire queue, including this header + * @msgSize: the padded size of queue element, 16 is minimum + * @msgCount: the number of elements in this queue + * @writePtr: head index of this queue + * @flags: 1 = swap the RX pointers + * @rxHdrOff: offset of readPtr in this structure + * @entryOff: offset of beginning of queue (msgqRxHeader), relative to + * beginning of this structure + * + * The command queue is a queue of RPCs that are sent from the driver to the + * GSP. The status queue is a queue of messages/responses from GSP-RM to the + * driver. Although the driver allocates memory for both queues, the command + * queue is owned by the driver and the status queue is owned by GSP-RM. In + * addition, the headers of the two queues must not share the same 4K page. + * + * Each queue is prefixed with this data structure. The idea is that a queue + * and its header are written to only by their owner. That is, only the + * driver writes to the command queue and command queue header, and only the + * GSP writes to the status (receive) queue and its header. + * + * This is enforced by the concept of "swapping" the RX pointers. This is + * why the 'flags' field must be set to 1. 'rxHdrOff' is how the GSP knows + * where the where the tail pointer of its status queue. + * + * When the driver writes a new RPC to the command queue, it updates writePtr. + * When it reads a new message from the status queue, it updates readPtr. In + * this way, the GSP knows when a new command is in the queue (it polls + * writePtr) and it knows how much free space is in the status queue (it + * checks readPtr). The driver never cares about how much free space is in + * the status queue. + * + * As usual, producers write to the head pointer, and consumers read from the + * tail pointer. When head == tail, the queue is empty. + * + * So to summarize: + * command.writePtr = head of command queue + * command.readPtr = tail of status queue + * status.writePtr = head of status queue + * status.readPtr = tail of command queue + */ typedef struct { NvU32 version; // queue version @@ -38,6 +81,14 @@ typedef struct NvU32 entryOff; // Offset of entries from start of backing store. } msgqTxHeader; +/** + * msgqRxHeader - RX queue data structure + * @readPtr: tail index of the other queue + * + * Although this is a separate struct, it could easily be merged into + * msgqTxHeader. msgqTxHeader.rxHdrOff is simply the offset of readPtr + * from the beginning of msgqTxHeader. + */ typedef struct { NvU32 readPtr; // message id of last message read diff --git a/drivers/gpu/drm/nouveau/nvkm/subdev/gsp/r535.c b/drivers/gpu/drm/nouveau/nvkm/subdev/gsp/r535.c index f6725a5f5bfb..44fb86841c05 100644 --- a/drivers/gpu/drm/nouveau/nvkm/subdev/gsp/r535.c +++ b/drivers/gpu/drm/nouveau/nvkm/subdev/gsp/r535.c @@ -1377,6 +1377,13 @@ r535_gsp_msg_post_event(void *priv, u32 fn, void *repv, u32 repc) return 0; } +/** + * r535_gsp_msg_run_cpu_sequencer() -- process I/O commands from the GSP + * + * The GSP sequencer is a list of I/O commands that the GSP can send to + * the driver to perform for various purposes. The most common usage is to + * perform a special mid-initialization reset. + */ static int r535_gsp_msg_run_cpu_sequencer(void *priv, u32 fn, void *repv, u32 repc) { @@ -1716,6 +1723,23 @@ r535_gsp_libos_id8(const char *name) return id; } +/** + * create_pte_array() - creates a PTE array of a physically contiguous buffer + * @ptes: pointer to the array + * @addr: base address of physically contiguous buffer (GSP_PAGE_SIZE aligned) + * @size: size of the buffer + * + * GSP-RM sometimes expects physically-contiguous buffers to have an array of + * "PTEs" for each page in that buffer. Although in theory that allows for + * the buffer to be physically discontiguous, GSP-RM does not currently + * support that. + * + * In this case, the PTEs are DMA addresses of each page of the buffer. Since + * the buffer is physically contiguous, calculating all the PTEs is simple + * math. + * + * See memdescGetPhysAddrsForGpu() + */ static void create_pte_array(u64 *ptes, dma_addr_t addr, size_t size) { unsigned int num_pages = DIV_ROUND_UP_ULL(size, GSP_PAGE_SIZE); @@ -1725,6 +1749,35 @@ static void create_pte_array(u64 *ptes, dma_addr_t addr, size_t size) ptes[i] = (u64)addr + (i << GSP_PAGE_SHIFT); } +/** + * r535_gsp_libos_init() -- create the libos arguments structure + * + * The logging buffers are byte queues that contain encoded printf-like + * messages from GSP-RM. They need to be decoded by a special application + * that can parse the buffers. + * + * The 'loginit' buffer contains logs from early GSP-RM init and + * exception dumps. The 'logrm' buffer contains the subsequent logs. Both are + * written to directly by GSP-RM and can be any multiple of GSP_PAGE_SIZE. + * + * The physical address map for the log buffer is stored in the buffer + * itself, starting with offset 1. Offset 0 contains the "put" pointer. + * + * The GSP only understands 4K pages (GSP_PAGE_SIZE), so even if the kernel is + * configured for a larger page size (e.g. 64K pages), we need to give + * the GSP an array of 4K pages. Fortunately, since the buffer is + * physically contiguous, it's simple math to calculate the addresses. + * + * The buffers must be a multiple of GSP_PAGE_SIZE. GSP-RM also currently + * ignores the @kind field for LOGINIT, LOGINTR, and LOGRM, but expects the + * buffers to be physically contiguous anyway. + * + * The memory allocated for the arguments must remain until the GSP sends the + * init_done RPC. + * + * See _kgspInitLibosLoggingStructures (allocates memory for buffers) + * See kgspSetupLibosInitArgs_IMPL (creates pLibosInitArgs[] array) + */ static int r535_gsp_libos_init(struct nvkm_gsp *gsp) { @@ -1835,6 +1888,35 @@ nvkm_gsp_radix3_dtor(struct nvkm_gsp *gsp, struct nvkm_gsp_radix3 *rx3) nvkm_gsp_mem_dtor(gsp, &rx3->mem[i]); } +/** + * nvkm_gsp_radix3_sg - build a radix3 table from a S/G list + * + * The GSP uses a three-level page table, called radix3, to map the firmware. + * Each 64-bit "pointer" in the table is either the bus address of an entry in + * the next table (for levels 0 and 1) or the bus address of the next page in + * the GSP firmware image itself. + * + * Level 0 contains a single entry in one page that points to the first page + * of level 1. + * + * Level 1, since it's also only one page in size, contains up to 512 entries, + * one for each page in Level 2. + * + * Level 2 can be up to 512 pages in size, and each of those entries points to + * the next page of the firmware image. Since there can be up to 512*512 + * pages, that limits the size of the firmware to 512*512*GSP_PAGE_SIZE = 1GB. + * + * Internally, the GSP has its window into system memory, but the base + * physical address of the aperture is not 0. In fact, it varies depending on + * the GPU architecture. Since the GPU is a PCI device, this window is + * accessed via DMA and is therefore bound by IOMMU translation. The end + * result is that GSP-RM must translate the bus addresses in the table to GSP + * physical addresses. All this should happen transparently. + * + * Returns 0 on success, or negative error code + * + * See kgspCreateRadix3_IMPL + */ static int nvkm_gsp_radix3_sg(struct nvkm_device *device, struct sg_table *sgt, u64 size, struct nvkm_gsp_radix3 *rx3) -- cgit v1.2.3 From 891e0eab32a57fca4d36c5162628eb0bcb1f0edf Mon Sep 17 00:00:00 2001 From: Yang Yingliang Date: Wed, 29 Nov 2023 17:34:08 +0800 Subject: firewire: core: fix possible memory leak in create_units() If device_register() fails, the refcount of device is not 0, the name allocated in dev_set_name() is leaked. To fix this by calling put_device(), so that it will be freed in callback function kobject_cleanup(). unreferenced object 0xffff9d99035c7a90 (size 8): comm "systemd-udevd", pid 168, jiffies 4294672386 (age 152.089s) hex dump (first 8 bytes): 66 77 30 2e 30 00 ff ff fw0.0... backtrace: [<00000000e1d62bac>] __kmem_cache_alloc_node+0x1e9/0x360 [<00000000bbeaff31>] __kmalloc_node_track_caller+0x44/0x1a0 [<00000000491f2fb4>] kvasprintf+0x67/0xd0 [<000000005b960ddc>] kobject_set_name_vargs+0x1e/0x90 [<00000000427ac591>] dev_set_name+0x4e/0x70 [<000000003b4e447d>] create_units+0xc5/0x110 fw_unit_release() will be called in the error path, move fw_device_get() before calling device_register() to keep balanced with fw_device_put() in fw_unit_release(). Cc: stable@vger.kernel.org Fixes: 1fa5ae857bb1 ("driver core: get rid of struct device's bus_id string array") Fixes: a1f64819fe9f ("firewire: struct device - replace bus_id with dev_name(), dev_set_name()") Signed-off-by: Yang Yingliang Signed-off-by: Takashi Sakamoto --- drivers/firewire/core-device.c | 11 ++++------- 1 file changed, 4 insertions(+), 7 deletions(-) diff --git a/drivers/firewire/core-device.c b/drivers/firewire/core-device.c index aa597cda0d88..2828e9573e90 100644 --- a/drivers/firewire/core-device.c +++ b/drivers/firewire/core-device.c @@ -717,14 +717,11 @@ static void create_units(struct fw_device *device) fw_unit_attributes, &unit->attribute_group); - if (device_register(&unit->device) < 0) - goto skip_unit; - fw_device_get(device); - continue; - - skip_unit: - kfree(unit); + if (device_register(&unit->device) < 0) { + put_device(&unit->device); + continue; + } } } -- cgit v1.2.3 From bd7a282650b8beb57bc9d19bfcb714b1ccae843a Mon Sep 17 00:00:00 2001 From: Jason Gunthorpe Date: Sun, 12 Nov 2023 14:50:13 -0400 Subject: iommufd: Add iommufd_ctx to iommufd_put_object() Will be used in the next patch. Link: https://lore.kernel.org/r/1-v2-ca9e00171c5b+123-iommufd_syz4_jgg@nvidia.com/ Reviewed-by: Kevin Tian Signed-off-by: Jason Gunthorpe --- drivers/iommu/iommufd/device.c | 14 +++++++------- drivers/iommu/iommufd/hw_pagetable.c | 8 ++++---- drivers/iommu/iommufd/ioas.c | 14 +++++++------- drivers/iommu/iommufd/iommufd_private.h | 3 ++- drivers/iommu/iommufd/selftest.c | 14 +++++++------- drivers/iommu/iommufd/vfio_compat.c | 18 +++++++++--------- 6 files changed, 36 insertions(+), 35 deletions(-) diff --git a/drivers/iommu/iommufd/device.c b/drivers/iommu/iommufd/device.c index 59d3a07300d9..873630c111c1 100644 --- a/drivers/iommu/iommufd/device.c +++ b/drivers/iommu/iommufd/device.c @@ -571,7 +571,7 @@ iommufd_device_auto_get_domain(struct iommufd_device *idev, continue; destroy_hwpt = (*do_attach)(idev, hwpt); if (IS_ERR(destroy_hwpt)) { - iommufd_put_object(&hwpt->obj); + iommufd_put_object(idev->ictx, &hwpt->obj); /* * -EINVAL means the domain is incompatible with the * device. Other error codes should propagate to @@ -583,7 +583,7 @@ iommufd_device_auto_get_domain(struct iommufd_device *idev, goto out_unlock; } *pt_id = hwpt->obj.id; - iommufd_put_object(&hwpt->obj); + iommufd_put_object(idev->ictx, &hwpt->obj); goto out_unlock; } @@ -652,7 +652,7 @@ static int iommufd_device_change_pt(struct iommufd_device *idev, u32 *pt_id, destroy_hwpt = ERR_PTR(-EINVAL); goto out_put_pt_obj; } - iommufd_put_object(pt_obj); + iommufd_put_object(idev->ictx, pt_obj); /* This destruction has to be after we unlock everything */ if (destroy_hwpt) @@ -660,7 +660,7 @@ static int iommufd_device_change_pt(struct iommufd_device *idev, u32 *pt_id, return 0; out_put_pt_obj: - iommufd_put_object(pt_obj); + iommufd_put_object(idev->ictx, pt_obj); return PTR_ERR(destroy_hwpt); } @@ -792,7 +792,7 @@ static int iommufd_access_change_ioas_id(struct iommufd_access *access, u32 id) if (IS_ERR(ioas)) return PTR_ERR(ioas); rc = iommufd_access_change_ioas(access, ioas); - iommufd_put_object(&ioas->obj); + iommufd_put_object(access->ictx, &ioas->obj); return rc; } @@ -941,7 +941,7 @@ void iommufd_access_notify_unmap(struct io_pagetable *iopt, unsigned long iova, access->ops->unmap(access->data, iova, length); - iommufd_put_object(&access->obj); + iommufd_put_object(access->ictx, &access->obj); xa_lock(&ioas->iopt.access_list); } xa_unlock(&ioas->iopt.access_list); @@ -1243,6 +1243,6 @@ int iommufd_get_hw_info(struct iommufd_ucmd *ucmd) out_free: kfree(data); out_put: - iommufd_put_object(&idev->obj); + iommufd_put_object(ucmd->ictx, &idev->obj); return rc; } diff --git a/drivers/iommu/iommufd/hw_pagetable.c b/drivers/iommu/iommufd/hw_pagetable.c index 2abbeafdbd22..cbb5df0a6c32 100644 --- a/drivers/iommu/iommufd/hw_pagetable.c +++ b/drivers/iommu/iommufd/hw_pagetable.c @@ -318,9 +318,9 @@ out_unlock: if (ioas) mutex_unlock(&ioas->mutex); out_put_pt: - iommufd_put_object(pt_obj); + iommufd_put_object(ucmd->ictx, pt_obj); out_put_idev: - iommufd_put_object(&idev->obj); + iommufd_put_object(ucmd->ictx, &idev->obj); return rc; } @@ -345,7 +345,7 @@ int iommufd_hwpt_set_dirty_tracking(struct iommufd_ucmd *ucmd) rc = iopt_set_dirty_tracking(&ioas->iopt, hwpt_paging->common.domain, enable); - iommufd_put_object(&hwpt_paging->common.obj); + iommufd_put_object(ucmd->ictx, &hwpt_paging->common.obj); return rc; } @@ -368,6 +368,6 @@ int iommufd_hwpt_get_dirty_bitmap(struct iommufd_ucmd *ucmd) rc = iopt_read_and_clear_dirty_data( &ioas->iopt, hwpt_paging->common.domain, cmd->flags, cmd); - iommufd_put_object(&hwpt_paging->common.obj); + iommufd_put_object(ucmd->ictx, &hwpt_paging->common.obj); return rc; } diff --git a/drivers/iommu/iommufd/ioas.c b/drivers/iommu/iommufd/ioas.c index d5624577f79f..742248276548 100644 --- a/drivers/iommu/iommufd/ioas.c +++ b/drivers/iommu/iommufd/ioas.c @@ -105,7 +105,7 @@ int iommufd_ioas_iova_ranges(struct iommufd_ucmd *ucmd) rc = -EMSGSIZE; out_put: up_read(&ioas->iopt.iova_rwsem); - iommufd_put_object(&ioas->obj); + iommufd_put_object(ucmd->ictx, &ioas->obj); return rc; } @@ -175,7 +175,7 @@ out_free: interval_tree_remove(node, &allowed_iova); kfree(container_of(node, struct iopt_allowed, node)); } - iommufd_put_object(&ioas->obj); + iommufd_put_object(ucmd->ictx, &ioas->obj); return rc; } @@ -228,7 +228,7 @@ int iommufd_ioas_map(struct iommufd_ucmd *ucmd) cmd->iova = iova; rc = iommufd_ucmd_respond(ucmd, sizeof(*cmd)); out_put: - iommufd_put_object(&ioas->obj); + iommufd_put_object(ucmd->ictx, &ioas->obj); return rc; } @@ -258,7 +258,7 @@ int iommufd_ioas_copy(struct iommufd_ucmd *ucmd) return PTR_ERR(src_ioas); rc = iopt_get_pages(&src_ioas->iopt, cmd->src_iova, cmd->length, &pages_list); - iommufd_put_object(&src_ioas->obj); + iommufd_put_object(ucmd->ictx, &src_ioas->obj); if (rc) return rc; @@ -279,7 +279,7 @@ int iommufd_ioas_copy(struct iommufd_ucmd *ucmd) cmd->dst_iova = iova; rc = iommufd_ucmd_respond(ucmd, sizeof(*cmd)); out_put_dst: - iommufd_put_object(&dst_ioas->obj); + iommufd_put_object(ucmd->ictx, &dst_ioas->obj); out_pages: iopt_free_pages_list(&pages_list); return rc; @@ -315,7 +315,7 @@ int iommufd_ioas_unmap(struct iommufd_ucmd *ucmd) rc = iommufd_ucmd_respond(ucmd, sizeof(*cmd)); out_put: - iommufd_put_object(&ioas->obj); + iommufd_put_object(ucmd->ictx, &ioas->obj); return rc; } @@ -393,6 +393,6 @@ int iommufd_ioas_option(struct iommufd_ucmd *ucmd) rc = -EOPNOTSUPP; } - iommufd_put_object(&ioas->obj); + iommufd_put_object(ucmd->ictx, &ioas->obj); return rc; } diff --git a/drivers/iommu/iommufd/iommufd_private.h b/drivers/iommu/iommufd/iommufd_private.h index a74cfefffbc6..f918a22f0d48 100644 --- a/drivers/iommu/iommufd/iommufd_private.h +++ b/drivers/iommu/iommufd/iommufd_private.h @@ -154,7 +154,8 @@ static inline bool iommufd_lock_obj(struct iommufd_object *obj) struct iommufd_object *iommufd_get_object(struct iommufd_ctx *ictx, u32 id, enum iommufd_object_type type); -static inline void iommufd_put_object(struct iommufd_object *obj) +static inline void iommufd_put_object(struct iommufd_ctx *ictx, + struct iommufd_object *obj) { refcount_dec(&obj->users); up_read(&obj->destroy_rwsem); diff --git a/drivers/iommu/iommufd/selftest.c b/drivers/iommu/iommufd/selftest.c index 5d93434003d8..022ef8f55088 100644 --- a/drivers/iommu/iommufd/selftest.c +++ b/drivers/iommu/iommufd/selftest.c @@ -86,7 +86,7 @@ void iommufd_test_syz_conv_iova_id(struct iommufd_ucmd *ucmd, if (IS_ERR(ioas)) return; *iova = iommufd_test_syz_conv_iova(&ioas->iopt, iova); - iommufd_put_object(&ioas->obj); + iommufd_put_object(ucmd->ictx, &ioas->obj); } struct mock_iommu_domain { @@ -500,7 +500,7 @@ get_md_pagetable(struct iommufd_ucmd *ucmd, u32 mockpt_id, return hwpt; if (hwpt->domain->type != IOMMU_DOMAIN_UNMANAGED || hwpt->domain->ops != mock_ops.default_domain_ops) { - iommufd_put_object(&hwpt->obj); + iommufd_put_object(ucmd->ictx, &hwpt->obj); return ERR_PTR(-EINVAL); } *mock = container_of(hwpt->domain, struct mock_iommu_domain, domain); @@ -518,7 +518,7 @@ get_md_pagetable_nested(struct iommufd_ucmd *ucmd, u32 mockpt_id, return hwpt; if (hwpt->domain->type != IOMMU_DOMAIN_NESTED || hwpt->domain->ops != &domain_nested_ops) { - iommufd_put_object(&hwpt->obj); + iommufd_put_object(ucmd->ictx, &hwpt->obj); return ERR_PTR(-EINVAL); } *mock_nested = container_of(hwpt->domain, @@ -681,7 +681,7 @@ static int iommufd_test_mock_domain_replace(struct iommufd_ucmd *ucmd, rc = iommufd_ucmd_respond(ucmd, sizeof(*cmd)); out_dev_obj: - iommufd_put_object(dev_obj); + iommufd_put_object(ucmd->ictx, dev_obj); return rc; } @@ -699,7 +699,7 @@ static int iommufd_test_add_reserved(struct iommufd_ucmd *ucmd, down_write(&ioas->iopt.iova_rwsem); rc = iopt_reserve_iova(&ioas->iopt, start, start + length - 1, NULL); up_write(&ioas->iopt.iova_rwsem); - iommufd_put_object(&ioas->obj); + iommufd_put_object(ucmd->ictx, &ioas->obj); return rc; } @@ -754,7 +754,7 @@ static int iommufd_test_md_check_pa(struct iommufd_ucmd *ucmd, rc = 0; out_put: - iommufd_put_object(&hwpt->obj); + iommufd_put_object(ucmd->ictx, &hwpt->obj); return rc; } @@ -1233,7 +1233,7 @@ static int iommufd_test_dirty(struct iommufd_ucmd *ucmd, unsigned int mockpt_id, out_free: kvfree(tmp); out_put: - iommufd_put_object(&hwpt->obj); + iommufd_put_object(ucmd->ictx, &hwpt->obj); return rc; } diff --git a/drivers/iommu/iommufd/vfio_compat.c b/drivers/iommu/iommufd/vfio_compat.c index 538fbf76354d..a3ad5f0b6c59 100644 --- a/drivers/iommu/iommufd/vfio_compat.c +++ b/drivers/iommu/iommufd/vfio_compat.c @@ -41,7 +41,7 @@ int iommufd_vfio_compat_ioas_get_id(struct iommufd_ctx *ictx, u32 *out_ioas_id) if (IS_ERR(ioas)) return PTR_ERR(ioas); *out_ioas_id = ioas->obj.id; - iommufd_put_object(&ioas->obj); + iommufd_put_object(ictx, &ioas->obj); return 0; } EXPORT_SYMBOL_NS_GPL(iommufd_vfio_compat_ioas_get_id, IOMMUFD_VFIO); @@ -98,7 +98,7 @@ int iommufd_vfio_compat_ioas_create(struct iommufd_ctx *ictx) if (ictx->vfio_ioas && iommufd_lock_obj(&ictx->vfio_ioas->obj)) { ret = 0; - iommufd_put_object(&ictx->vfio_ioas->obj); + iommufd_put_object(ictx, &ictx->vfio_ioas->obj); goto out_abort; } ictx->vfio_ioas = ioas; @@ -133,7 +133,7 @@ int iommufd_vfio_ioas(struct iommufd_ucmd *ucmd) if (IS_ERR(ioas)) return PTR_ERR(ioas); cmd->ioas_id = ioas->obj.id; - iommufd_put_object(&ioas->obj); + iommufd_put_object(ucmd->ictx, &ioas->obj); return iommufd_ucmd_respond(ucmd, sizeof(*cmd)); case IOMMU_VFIO_IOAS_SET: @@ -143,7 +143,7 @@ int iommufd_vfio_ioas(struct iommufd_ucmd *ucmd) xa_lock(&ucmd->ictx->objects); ucmd->ictx->vfio_ioas = ioas; xa_unlock(&ucmd->ictx->objects); - iommufd_put_object(&ioas->obj); + iommufd_put_object(ucmd->ictx, &ioas->obj); return 0; case IOMMU_VFIO_IOAS_CLEAR: @@ -190,7 +190,7 @@ static int iommufd_vfio_map_dma(struct iommufd_ctx *ictx, unsigned int cmd, iova = map.iova; rc = iopt_map_user_pages(ictx, &ioas->iopt, &iova, u64_to_user_ptr(map.vaddr), map.size, iommu_prot, 0); - iommufd_put_object(&ioas->obj); + iommufd_put_object(ictx, &ioas->obj); return rc; } @@ -249,7 +249,7 @@ static int iommufd_vfio_unmap_dma(struct iommufd_ctx *ictx, unsigned int cmd, rc = -EFAULT; err_put: - iommufd_put_object(&ioas->obj); + iommufd_put_object(ictx, &ioas->obj); return rc; } @@ -272,7 +272,7 @@ static int iommufd_vfio_cc_iommu(struct iommufd_ctx *ictx) } mutex_unlock(&ioas->mutex); - iommufd_put_object(&ioas->obj); + iommufd_put_object(ictx, &ioas->obj); return rc; } @@ -349,7 +349,7 @@ static int iommufd_vfio_set_iommu(struct iommufd_ctx *ictx, unsigned long type) */ if (type == VFIO_TYPE1_IOMMU) rc = iopt_disable_large_pages(&ioas->iopt); - iommufd_put_object(&ioas->obj); + iommufd_put_object(ictx, &ioas->obj); return rc; } @@ -511,7 +511,7 @@ static int iommufd_vfio_iommu_get_info(struct iommufd_ctx *ictx, out_put: up_read(&ioas->iopt.iova_rwsem); - iommufd_put_object(&ioas->obj); + iommufd_put_object(ictx, &ioas->obj); return rc; } -- cgit v1.2.3 From 6f9c4d8c468c189d6dc470324bd52955f8aa0a10 Mon Sep 17 00:00:00 2001 From: Jason Gunthorpe Date: Sun, 12 Nov 2023 15:44:08 -0400 Subject: iommufd: Do not UAF during iommufd_put_object() The mixture of kernel and user space lifecycle objects continues to be complicated inside iommufd. The obj->destroy_rwsem is used to bring order to the kernel driver destruction sequence but it cannot be sequenced right with the other refcounts so we end up possibly UAF'ing: BUG: KASAN: slab-use-after-free in __up_read+0x627/0x750 kernel/locking/rwsem.c:1342 Read of size 8 at addr ffff888073cde868 by task syz-executor934/6535 CPU: 1 PID: 6535 Comm: syz-executor934 Not tainted 6.6.0-rc7-syzkaller-00195-g2af9b20dbb39 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/09/2023 Call Trace: __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xd9/0x1b0 lib/dump_stack.c:106 print_address_description mm/kasan/report.c:364 [inline] print_report+0xc4/0x620 mm/kasan/report.c:475 kasan_report+0xda/0x110 mm/kasan/report.c:588 __up_read+0x627/0x750 kernel/locking/rwsem.c:1342 iommufd_put_object drivers/iommu/iommufd/iommufd_private.h:149 [inline] iommufd_vfio_ioas+0x46c/0x580 drivers/iommu/iommufd/vfio_compat.c:146 iommufd_fops_ioctl+0x347/0x4d0 drivers/iommu/iommufd/main.c:398 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:871 [inline] __se_sys_ioctl fs/ioctl.c:857 [inline] __x64_sys_ioctl+0x18f/0x210 fs/ioctl.c:857 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x38/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd There are two races here, the more obvious one: CPU 0 CPU 1 iommufd_put_object() iommufd_destroy() refcount_dec(&obj->users) iommufd_object_remove() kfree() up_read(&obj->destroy_rwsem) // Boom And there is also perhaps some possibility that the rwsem could hit an issue: CPU 0 CPU 1 iommufd_put_object() iommufd_object_destroy_user() refcount_dec(&obj->users); down_write(&obj->destroy_rwsem) up_read(&obj->destroy_rwsem); atomic_long_or(RWSEM_FLAG_WAITERS, &sem->count); tmp = atomic_long_add_return_release() rwsem_try_write_lock() iommufd_object_remove() up_write(&obj->destroy_rwsem) kfree() clear_nonspinnable() // Boom Fix this by reorganizing this again so that two refcounts are used to keep track of things with a rule that users == 0 && shortterm_users == 0 means no other threads have that memory. Put a wait_queue in the iommufd_ctx object that is triggered when any sub object reaches a 0 shortterm_users. This allows the same wait for userspace ioctls to finish behavior that the rwsem was providing. This is weaker still than the prior versions: - There is no bias on shortterm_users so if some thread is waiting to destroy other threads can continue to get new read sides - If destruction fails, eg because of an active in-kernel user, then shortterm_users will have cycled to zero momentarily blocking new users - If userspace races destroy with other userspace operations they continue to get an EBUSY since we still can't intermix looking up an ID and sleeping for its unref In all cases these are things that userspace brings on itself, correct programs will not hit them. Fixes: 99f98a7c0d69 ("iommufd: IOMMUFD_DESTROY should not increase the refcount") Link: https://lore.kernel.org/all/2-v2-ca9e00171c5b+123-iommufd_syz4_jgg@nvidia.com/ Reported-by: syzbot+d31adfb277377ef8fcba@syzkaller.appspotmail.com Closes: https://lore.kernel.org/r/00000000000055ef9a0609336580@google.com Reviewed-by: Kevin Tian Signed-off-by: Jason Gunthorpe --- drivers/iommu/iommufd/iommufd_private.h | 67 ++++++++++++--- drivers/iommu/iommufd/main.c | 146 +++++++++++++++++--------------- 2 files changed, 135 insertions(+), 78 deletions(-) diff --git a/drivers/iommu/iommufd/iommufd_private.h b/drivers/iommu/iommufd/iommufd_private.h index f918a22f0d48..abae041e256f 100644 --- a/drivers/iommu/iommufd/iommufd_private.h +++ b/drivers/iommu/iommufd/iommufd_private.h @@ -21,6 +21,7 @@ struct iommufd_ctx { struct file *file; struct xarray objects; struct xarray groups; + wait_queue_head_t destroy_wait; u8 account_mode; /* Compatibility with VFIO no iommu */ @@ -135,7 +136,7 @@ enum iommufd_object_type { /* Base struct for all objects with a userspace ID handle. */ struct iommufd_object { - struct rw_semaphore destroy_rwsem; + refcount_t shortterm_users; refcount_t users; enum iommufd_object_type type; unsigned int id; @@ -143,10 +144,15 @@ struct iommufd_object { static inline bool iommufd_lock_obj(struct iommufd_object *obj) { - if (!down_read_trylock(&obj->destroy_rwsem)) + if (!refcount_inc_not_zero(&obj->users)) return false; - if (!refcount_inc_not_zero(&obj->users)) { - up_read(&obj->destroy_rwsem); + if (!refcount_inc_not_zero(&obj->shortterm_users)) { + /* + * If the caller doesn't already have a ref on obj this must be + * called under the xa_lock. Otherwise the caller is holding a + * ref on users. Thus it cannot be one before this decrement. + */ + refcount_dec(&obj->users); return false; } return true; @@ -157,8 +163,13 @@ struct iommufd_object *iommufd_get_object(struct iommufd_ctx *ictx, u32 id, static inline void iommufd_put_object(struct iommufd_ctx *ictx, struct iommufd_object *obj) { + /* + * Users first, then shortterm so that REMOVE_WAIT_SHORTTERM never sees + * a spurious !0 users with a 0 shortterm_users. + */ refcount_dec(&obj->users); - up_read(&obj->destroy_rwsem); + if (refcount_dec_and_test(&obj->shortterm_users)) + wake_up_interruptible_all(&ictx->destroy_wait); } void iommufd_object_abort(struct iommufd_ctx *ictx, struct iommufd_object *obj); @@ -166,17 +177,49 @@ void iommufd_object_abort_and_destroy(struct iommufd_ctx *ictx, struct iommufd_object *obj); void iommufd_object_finalize(struct iommufd_ctx *ictx, struct iommufd_object *obj); -void __iommufd_object_destroy_user(struct iommufd_ctx *ictx, - struct iommufd_object *obj, bool allow_fail); + +enum { + REMOVE_WAIT_SHORTTERM = 1, +}; +int iommufd_object_remove(struct iommufd_ctx *ictx, + struct iommufd_object *to_destroy, u32 id, + unsigned int flags); + +/* + * The caller holds a users refcount and wants to destroy the object. At this + * point the caller has no shortterm_users reference and at least the xarray + * will be holding one. + */ static inline void iommufd_object_destroy_user(struct iommufd_ctx *ictx, struct iommufd_object *obj) { - __iommufd_object_destroy_user(ictx, obj, false); + int ret; + + ret = iommufd_object_remove(ictx, obj, obj->id, REMOVE_WAIT_SHORTTERM); + + /* + * If there is a bug and we couldn't destroy the object then we did put + * back the caller's users refcount and will eventually try to free it + * again during close. + */ + WARN_ON(ret); } -static inline void iommufd_object_deref_user(struct iommufd_ctx *ictx, - struct iommufd_object *obj) + +/* + * The HWPT allocated by autodomains is used in possibly many devices and + * is automatically destroyed when its refcount reaches zero. + * + * If userspace uses the HWPT manually, even for a short term, then it will + * disrupt this refcounting and the auto-free in the kernel will not work. + * Userspace that tries to use the automatically allocated HWPT must be careful + * to ensure that it is consistently destroyed, eg by not racing accesses + * and by not attaching an automatic HWPT to a device manually. + */ +static inline void +iommufd_object_put_and_try_destroy(struct iommufd_ctx *ictx, + struct iommufd_object *obj) { - __iommufd_object_destroy_user(ictx, obj, true); + iommufd_object_remove(ictx, obj, obj->id, 0); } struct iommufd_object *_iommufd_object_alloc(struct iommufd_ctx *ictx, @@ -312,7 +355,7 @@ static inline void iommufd_hw_pagetable_put(struct iommufd_ctx *ictx, lockdep_assert_not_held(&hwpt_paging->ioas->mutex); if (hwpt_paging->auto_domain) { - iommufd_object_deref_user(ictx, &hwpt->obj); + iommufd_object_put_and_try_destroy(ictx, &hwpt->obj); return; } } diff --git a/drivers/iommu/iommufd/main.c b/drivers/iommu/iommufd/main.c index 45b9d40773b1..c9091e46d208 100644 --- a/drivers/iommu/iommufd/main.c +++ b/drivers/iommu/iommufd/main.c @@ -33,7 +33,6 @@ struct iommufd_object *_iommufd_object_alloc(struct iommufd_ctx *ictx, size_t size, enum iommufd_object_type type) { - static struct lock_class_key obj_keys[IOMMUFD_OBJ_MAX]; struct iommufd_object *obj; int rc; @@ -41,15 +40,8 @@ struct iommufd_object *_iommufd_object_alloc(struct iommufd_ctx *ictx, if (!obj) return ERR_PTR(-ENOMEM); obj->type = type; - /* - * In most cases the destroy_rwsem is obtained with try so it doesn't - * interact with lockdep, however on destroy we have to sleep. This - * means if we have to destroy an object while holding a get on another - * object it triggers lockdep. Using one locking class per object type - * is a simple and reasonable way to avoid this. - */ - __init_rwsem(&obj->destroy_rwsem, "iommufd_object::destroy_rwsem", - &obj_keys[type]); + /* Starts out bias'd by 1 until it is removed from the xarray */ + refcount_set(&obj->shortterm_users, 1); refcount_set(&obj->users, 1); /* @@ -129,92 +121,113 @@ struct iommufd_object *iommufd_get_object(struct iommufd_ctx *ictx, u32 id, return obj; } +static int iommufd_object_dec_wait_shortterm(struct iommufd_ctx *ictx, + struct iommufd_object *to_destroy) +{ + if (refcount_dec_and_test(&to_destroy->shortterm_users)) + return 0; + + if (wait_event_timeout(ictx->destroy_wait, + refcount_read(&to_destroy->shortterm_users) == + 0, + msecs_to_jiffies(10000))) + return 0; + + pr_crit("Time out waiting for iommufd object to become free\n"); + refcount_inc(&to_destroy->shortterm_users); + return -EBUSY; +} + /* * Remove the given object id from the xarray if the only reference to the - * object is held by the xarray. The caller must call ops destroy(). + * object is held by the xarray. */ -static struct iommufd_object *iommufd_object_remove(struct iommufd_ctx *ictx, - u32 id, bool extra_put) +int iommufd_object_remove(struct iommufd_ctx *ictx, + struct iommufd_object *to_destroy, u32 id, + unsigned int flags) { struct iommufd_object *obj; XA_STATE(xas, &ictx->objects, id); - - xa_lock(&ictx->objects); - obj = xas_load(&xas); - if (xa_is_zero(obj) || !obj) { - obj = ERR_PTR(-ENOENT); - goto out_xa; - } + bool zerod_shortterm = false; + int ret; /* - * If the caller is holding a ref on obj we put it here under the - * spinlock. + * The purpose of the shortterm_users is to ensure deterministic + * destruction of objects used by external drivers and destroyed by this + * function. Any temporary increment of the refcount must increment + * shortterm_users, such as during ioctl execution. */ - if (extra_put) + if (flags & REMOVE_WAIT_SHORTTERM) { + ret = iommufd_object_dec_wait_shortterm(ictx, to_destroy); + if (ret) { + /* + * We have a bug. Put back the callers reference and + * defer cleaning this object until close. + */ + refcount_dec(&to_destroy->users); + return ret; + } + zerod_shortterm = true; + } + + xa_lock(&ictx->objects); + obj = xas_load(&xas); + if (to_destroy) { + /* + * If the caller is holding a ref on obj we put it here under + * the spinlock. + */ refcount_dec(&obj->users); + if (WARN_ON(obj != to_destroy)) { + ret = -ENOENT; + goto err_xa; + } + } else if (xa_is_zero(obj) || !obj) { + ret = -ENOENT; + goto err_xa; + } + if (!refcount_dec_if_one(&obj->users)) { - obj = ERR_PTR(-EBUSY); - goto out_xa; + ret = -EBUSY; + goto err_xa; } xas_store(&xas, NULL); if (ictx->vfio_ioas == container_of(obj, struct iommufd_ioas, obj)) ictx->vfio_ioas = NULL; - -out_xa: xa_unlock(&ictx->objects); - /* The returned object reference count is zero */ - return obj; -} - -/* - * The caller holds a users refcount and wants to destroy the object. Returns - * true if the object was destroyed. In all cases the caller no longer has a - * reference on obj. - */ -void __iommufd_object_destroy_user(struct iommufd_ctx *ictx, - struct iommufd_object *obj, bool allow_fail) -{ - struct iommufd_object *ret; - /* - * The purpose of the destroy_rwsem is to ensure deterministic - * destruction of objects used by external drivers and destroyed by this - * function. Any temporary increment of the refcount must hold the read - * side of this, such as during ioctl execution. - */ - down_write(&obj->destroy_rwsem); - ret = iommufd_object_remove(ictx, obj->id, true); - up_write(&obj->destroy_rwsem); - - if (allow_fail && IS_ERR(ret)) - return; - - /* - * If there is a bug and we couldn't destroy the object then we did put - * back the caller's refcount and will eventually try to free it again - * during close. + * Since users is zero any positive users_shortterm must be racing + * iommufd_put_object(), or we have a bug. */ - if (WARN_ON(IS_ERR(ret))) - return; + if (!zerod_shortterm) { + ret = iommufd_object_dec_wait_shortterm(ictx, obj); + if (WARN_ON(ret)) + return ret; + } iommufd_object_ops[obj->type].destroy(obj); kfree(obj); + return 0; + +err_xa: + if (zerod_shortterm) { + /* Restore the xarray owned reference */ + refcount_set(&obj->shortterm_users, 1); + } + xa_unlock(&ictx->objects); + + /* The returned object reference count is zero */ + return ret; } static int iommufd_destroy(struct iommufd_ucmd *ucmd) { struct iommu_destroy *cmd = ucmd->cmd; - struct iommufd_object *obj; - obj = iommufd_object_remove(ucmd->ictx, cmd->id, false); - if (IS_ERR(obj)) - return PTR_ERR(obj); - iommufd_object_ops[obj->type].destroy(obj); - kfree(obj); - return 0; + return iommufd_object_remove(ucmd->ictx, NULL, cmd->id, 0); } static int iommufd_fops_open(struct inode *inode, struct file *filp) @@ -238,6 +251,7 @@ static int iommufd_fops_open(struct inode *inode, struct file *filp) xa_init_flags(&ictx->objects, XA_FLAGS_ALLOC1 | XA_FLAGS_ACCOUNT); xa_init(&ictx->groups); ictx->file = filp; + init_waitqueue_head(&ictx->destroy_wait); filp->private_data = ictx; return 0; } -- cgit v1.2.3 From 5558b92e8d39e18aa19619be2ee37274e9592528 Mon Sep 17 00:00:00 2001 From: Alison Schofield Date: Sun, 26 Nov 2023 16:09:29 -0800 Subject: cxl/core: Always hold region_rwsem while reading poison lists A read of a device poison list is triggered via a sysfs attribute and the results are logged as kernel trace events of type cxl_poison. The work is managed by either: a) the region driver when one of more regions map the device, or by b) the memdev driver when no regions map the device. In the case of a) the region driver holds the region_rwsem while reading the poison by committed endpoint decoder mappings and for any unmapped resources. This makes sure that the cxl_poison trace event trace reports valid region info. (Region name, HPA, and UUID). In the case of b) the memdev driver holds the dpa_rwsem preventing new DPA resources from being attached to a region. However, it leaves a gap between region attach and decoder commit actions. If a DPA in the gap is in the poison list, the cxl_poison trace event will omit the region info. Close the gap by holding the region_rwsem and the dpa_rwsem when reading poison per memdev. Since both methods now hold both locks, down_read both from the caller. Doing so also addresses the lockdep assert that found this issue: Commit 458ba8189cb4 ("cxl: Add cxl_decoders_committed() helper") Fixes: f0832a586396 ("cxl/region: Provide region info to the cxl_poison trace event") Signed-off-by: Alison Schofield Reviewed-by: Davidlohr Bueso Reviewed-by: Dave Jiang Link: https://lore.kernel.org/r/08e8e7ec9a3413b91d51de39e385653494b1eed0.1701041440.git.alison.schofield@intel.com Signed-off-by: Dan Williams --- drivers/cxl/core/memdev.c | 9 ++++++++- drivers/cxl/core/region.c | 5 ----- 2 files changed, 8 insertions(+), 6 deletions(-) diff --git a/drivers/cxl/core/memdev.c b/drivers/cxl/core/memdev.c index fc5c2b414793..5ad1b13e780a 100644 --- a/drivers/cxl/core/memdev.c +++ b/drivers/cxl/core/memdev.c @@ -227,10 +227,16 @@ int cxl_trigger_poison_list(struct cxl_memdev *cxlmd) if (!port || !is_cxl_endpoint(port)) return -EINVAL; - rc = down_read_interruptible(&cxl_dpa_rwsem); + rc = down_read_interruptible(&cxl_region_rwsem); if (rc) return rc; + rc = down_read_interruptible(&cxl_dpa_rwsem); + if (rc) { + up_read(&cxl_region_rwsem); + return rc; + } + if (cxl_num_decoders_committed(port) == 0) { /* No regions mapped to this memdev */ rc = cxl_get_poison_by_memdev(cxlmd); @@ -239,6 +245,7 @@ int cxl_trigger_poison_list(struct cxl_memdev *cxlmd) rc = cxl_get_poison_by_endpoint(port); } up_read(&cxl_dpa_rwsem); + up_read(&cxl_region_rwsem); return rc; } diff --git a/drivers/cxl/core/region.c b/drivers/cxl/core/region.c index 56e575c79bb4..3e817a6f94c6 100644 --- a/drivers/cxl/core/region.c +++ b/drivers/cxl/core/region.c @@ -2467,10 +2467,6 @@ int cxl_get_poison_by_endpoint(struct cxl_port *port) struct cxl_poison_context ctx; int rc = 0; - rc = down_read_interruptible(&cxl_region_rwsem); - if (rc) - return rc; - ctx = (struct cxl_poison_context) { .port = port }; @@ -2480,7 +2476,6 @@ int cxl_get_poison_by_endpoint(struct cxl_port *port) rc = cxl_get_poison_unmapped(to_cxl_memdev(port->uport_dev), &ctx); - up_read(&cxl_region_rwsem); return rc; } -- cgit v1.2.3 From 0e33ac9c3ffe5e4f55c68345f44cea7fec2fe750 Mon Sep 17 00:00:00 2001 From: Alison Schofield Date: Sun, 26 Nov 2023 16:09:30 -0800 Subject: cxl/memdev: Hold region_rwsem during inject and clear poison ops Poison inject and clear are supported via debugfs where a privileged user can inject and clear poison to a device physical address. Commit 458ba8189cb4 ("cxl: Add cxl_decoders_committed() helper") added a lockdep assert that highlighted a gap in poison inject and clear functions where holding the dpa_rwsem does not assure that a a DPA is not added to a region. The impact for inject and clear is that if the DPA address being injected or cleared has been attached to a region, but not yet committed, the dev_dbg() message intended to alert the debug user that they are acting on a mapped address is not emitted. Also, the cxl_poison trace event that serves as a log of the inject and clear activity will not include region info. Close this gap by snapshotting an unchangeable region state during poison inject and clear operations. That means holding both the region_rwsem and the dpa_rwsem during the inject and clear ops. Fixes: d2fbc4865802 ("cxl/memdev: Add support for the Inject Poison mailbox command") Fixes: 9690b07748d1 ("cxl/memdev: Add support for the Clear Poison mailbox command") Signed-off-by: Alison Schofield Reviewed-by: Davidlohr Bueso Reviewed-by: Dave Jiang Link: https://lore.kernel.org/r/08721dc1df0a51e4e38fecd02425c3475912dfd5.1701041440.git.alison.schofield@intel.com Signed-off-by: Dan Williams --- drivers/cxl/core/memdev.c | 18 ++++++++++++++++-- 1 file changed, 16 insertions(+), 2 deletions(-) diff --git a/drivers/cxl/core/memdev.c b/drivers/cxl/core/memdev.c index 5ad1b13e780a..2f43d368ba07 100644 --- a/drivers/cxl/core/memdev.c +++ b/drivers/cxl/core/memdev.c @@ -331,10 +331,16 @@ int cxl_inject_poison(struct cxl_memdev *cxlmd, u64 dpa) if (!IS_ENABLED(CONFIG_DEBUG_FS)) return 0; - rc = down_read_interruptible(&cxl_dpa_rwsem); + rc = down_read_interruptible(&cxl_region_rwsem); if (rc) return rc; + rc = down_read_interruptible(&cxl_dpa_rwsem); + if (rc) { + up_read(&cxl_region_rwsem); + return rc; + } + rc = cxl_validate_poison_dpa(cxlmd, dpa); if (rc) goto out; @@ -362,6 +368,7 @@ int cxl_inject_poison(struct cxl_memdev *cxlmd, u64 dpa) trace_cxl_poison(cxlmd, cxlr, &record, 0, 0, CXL_POISON_TRACE_INJECT); out: up_read(&cxl_dpa_rwsem); + up_read(&cxl_region_rwsem); return rc; } @@ -379,10 +386,16 @@ int cxl_clear_poison(struct cxl_memdev *cxlmd, u64 dpa) if (!IS_ENABLED(CONFIG_DEBUG_FS)) return 0; - rc = down_read_interruptible(&cxl_dpa_rwsem); + rc = down_read_interruptible(&cxl_region_rwsem); if (rc) return rc; + rc = down_read_interruptible(&cxl_dpa_rwsem); + if (rc) { + up_read(&cxl_region_rwsem); + return rc; + } + rc = cxl_validate_poison_dpa(cxlmd, dpa); if (rc) goto out; @@ -419,6 +432,7 @@ int cxl_clear_poison(struct cxl_memdev *cxlmd, u64 dpa) trace_cxl_poison(cxlmd, cxlr, &record, 0, 0, CXL_POISON_TRACE_CLEAR); out: up_read(&cxl_dpa_rwsem); + up_read(&cxl_region_rwsem); return rc; } -- cgit v1.2.3 From 83d5518b124dfd605f10a68128482c839a239f9d Mon Sep 17 00:00:00 2001 From: David Howells Date: Wed, 29 Nov 2023 16:56:17 +0000 Subject: cifs: Fix FALLOC_FL_ZERO_RANGE by setting i_size if EOF moved Fix the cifs filesystem implementations of FALLOC_FL_ZERO_RANGE, in smb3_zero_range(), to set i_size after extending the file on the server. Fixes: 72c419d9b073 ("cifs: fix smb3_zero_range so it can expand the file-size when required") Cc: stable@vger.kernel.org Signed-off-by: David Howells Acked-by: Paulo Alcantara cc: Shyam Prasad N cc: Rohith Surabattula cc: Jeff Layton cc: linux-cifs@vger.kernel.org cc: linux-mm@kvack.org Signed-off-by: Steve French --- fs/smb/client/smb2ops.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/fs/smb/client/smb2ops.c b/fs/smb/client/smb2ops.c index 82ab62fd0040..f1b0b2b11ab2 100644 --- a/fs/smb/client/smb2ops.c +++ b/fs/smb/client/smb2ops.c @@ -3311,6 +3311,7 @@ static long smb3_zero_range(struct file *file, struct cifs_tcon *tcon, struct inode *inode = file_inode(file); struct cifsInodeInfo *cifsi = CIFS_I(inode); struct cifsFileInfo *cfile = file->private_data; + unsigned long long new_size; long rc; unsigned int xid; __le64 eof; @@ -3341,10 +3342,15 @@ static long smb3_zero_range(struct file *file, struct cifs_tcon *tcon, /* * do we also need to change the size of the file? */ - if (keep_size == false && i_size_read(inode) < offset + len) { - eof = cpu_to_le64(offset + len); + new_size = offset + len; + if (keep_size == false && (unsigned long long)i_size_read(inode) < new_size) { + eof = cpu_to_le64(new_size); rc = SMB2_set_eof(xid, tcon, cfile->fid.persistent_fid, cfile->fid.volatile_fid, cfile->pid, &eof); + if (rc >= 0) { + truncate_setsize(inode, new_size); + fscache_resize_cookie(cifs_inode_cookie(inode), new_size); + } } zero_range_exit: -- cgit v1.2.3 From 88010155f02b2c3b03c71609ba6ceeb457ece095 Mon Sep 17 00:00:00 2001 From: David Howells Date: Wed, 29 Nov 2023 16:56:18 +0000 Subject: cifs: Fix FALLOC_FL_INSERT_RANGE by setting i_size after EOF moved Fix the cifs filesystem implementations of FALLOC_FL_INSERT_RANGE, in smb3_insert_range(), to set i_size after extending the file on the server and before we do the copy to open the gap (as we don't clean up the EOF marker if the copy fails). Fixes: 7fe6fe95b936 ("cifs: add FALLOC_FL_INSERT_RANGE support") Cc: stable@vger.kernel.org Signed-off-by: David Howells Acked-by: Paulo Alcantara cc: Shyam Prasad N cc: Rohith Surabattula cc: Jeff Layton cc: linux-cifs@vger.kernel.org cc: linux-mm@kvack.org Signed-off-by: Steve French --- fs/smb/client/smb2ops.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/fs/smb/client/smb2ops.c b/fs/smb/client/smb2ops.c index f1b0b2b11ab2..45931115f475 100644 --- a/fs/smb/client/smb2ops.c +++ b/fs/smb/client/smb2ops.c @@ -3745,6 +3745,9 @@ static long smb3_insert_range(struct file *file, struct cifs_tcon *tcon, if (rc < 0) goto out_2; + truncate_setsize(inode, old_eof + len); + fscache_resize_cookie(cifs_inode_cookie(inode), i_size_read(inode)); + rc = smb2_copychunk_range(xid, cfile, cfile, off, count, off + len); if (rc < 0) goto out_2; -- cgit v1.2.3 From 9f74a3dfcf83e11aedcb98250b8040dbc6d9659a Mon Sep 17 00:00:00 2001 From: Dave Ertman Date: Mon, 27 Nov 2023 13:23:38 -0800 Subject: ice: Fix VF Reset paths when interface in a failed over aggregate There is an error when an interface has the following conditions: - PF is in an aggregate (bond) - PF has VFs created on it - bond is in a state where it is failed-over to the secondary interface - A VF reset is issued on one or more of those VFs The issue is generated by the originating PF trying to rebuild or reconfigure the VF resources. Since the bond is failed over to the secondary interface the queue contexts are in a modified state. To fix this issue, have the originating interface reclaim its resources prior to the tear-down and rebuild or reconfigure. Then after the process is complete, move the resources back to the currently active interface. There are multiple paths that can be used depending on what triggered the event, so create a helper function to move the queues and use paired calls to the helper (back to origin, process, then move back to active interface) under the same lag_mutex lock. Fixes: 1e0f9881ef79 ("ice: Flesh out implementation of support for SRIOV on bonded interface") Signed-off-by: Dave Ertman Tested-by: Sujai Buvaneswaran Signed-off-by: Tony Nguyen Reviewed-by: Przemek Kitszel Link: https://lore.kernel.org/r/20231127212340.1137657-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/intel/ice/ice_lag.c | 122 +++++++++++++++----------- drivers/net/ethernet/intel/ice/ice_lag.h | 1 + drivers/net/ethernet/intel/ice/ice_vf_lib.c | 20 +++++ drivers/net/ethernet/intel/ice/ice_virtchnl.c | 25 ++++++ 4 files changed, 118 insertions(+), 50 deletions(-) diff --git a/drivers/net/ethernet/intel/ice/ice_lag.c b/drivers/net/ethernet/intel/ice/ice_lag.c index cd065ec48c87..280994ee5933 100644 --- a/drivers/net/ethernet/intel/ice/ice_lag.c +++ b/drivers/net/ethernet/intel/ice/ice_lag.c @@ -569,6 +569,50 @@ resume_traffic: dev_dbg(dev, "Problem restarting traffic for LAG node move\n"); } +/** + * ice_lag_build_netdev_list - populate the lag struct's netdev list + * @lag: local lag struct + * @ndlist: pointer to netdev list to populate + */ +static void ice_lag_build_netdev_list(struct ice_lag *lag, + struct ice_lag_netdev_list *ndlist) +{ + struct ice_lag_netdev_list *nl; + struct net_device *tmp_nd; + + INIT_LIST_HEAD(&ndlist->node); + rcu_read_lock(); + for_each_netdev_in_bond_rcu(lag->upper_netdev, tmp_nd) { + nl = kzalloc(sizeof(*nl), GFP_ATOMIC); + if (!nl) + break; + + nl->netdev = tmp_nd; + list_add(&nl->node, &ndlist->node); + } + rcu_read_unlock(); + lag->netdev_head = &ndlist->node; +} + +/** + * ice_lag_destroy_netdev_list - free lag struct's netdev list + * @lag: pointer to local lag struct + * @ndlist: pointer to lag struct netdev list + */ +static void ice_lag_destroy_netdev_list(struct ice_lag *lag, + struct ice_lag_netdev_list *ndlist) +{ + struct ice_lag_netdev_list *entry, *n; + + rcu_read_lock(); + list_for_each_entry_safe(entry, n, &ndlist->node, node) { + list_del(&entry->node); + kfree(entry); + } + rcu_read_unlock(); + lag->netdev_head = NULL; +} + /** * ice_lag_move_single_vf_nodes - Move Tx scheduling nodes for single VF * @lag: primary interface LAG struct @@ -597,7 +641,6 @@ ice_lag_move_single_vf_nodes(struct ice_lag *lag, u8 oldport, u8 newport, void ice_lag_move_new_vf_nodes(struct ice_vf *vf) { struct ice_lag_netdev_list ndlist; - struct list_head *tmp, *n; u8 pri_port, act_port; struct ice_lag *lag; struct ice_vsi *vsi; @@ -621,38 +664,15 @@ void ice_lag_move_new_vf_nodes(struct ice_vf *vf) pri_port = pf->hw.port_info->lport; act_port = lag->active_port; - if (lag->upper_netdev) { - struct ice_lag_netdev_list *nl; - struct net_device *tmp_nd; - - INIT_LIST_HEAD(&ndlist.node); - rcu_read_lock(); - for_each_netdev_in_bond_rcu(lag->upper_netdev, tmp_nd) { - nl = kzalloc(sizeof(*nl), GFP_ATOMIC); - if (!nl) - break; - - nl->netdev = tmp_nd; - list_add(&nl->node, &ndlist.node); - } - rcu_read_unlock(); - } - - lag->netdev_head = &ndlist.node; + if (lag->upper_netdev) + ice_lag_build_netdev_list(lag, &ndlist); if (ice_is_feature_supported(pf, ICE_F_SRIOV_LAG) && lag->bonded && lag->primary && pri_port != act_port && !list_empty(lag->netdev_head)) ice_lag_move_single_vf_nodes(lag, pri_port, act_port, vsi->idx); - list_for_each_safe(tmp, n, &ndlist.node) { - struct ice_lag_netdev_list *entry; - - entry = list_entry(tmp, struct ice_lag_netdev_list, node); - list_del(&entry->node); - kfree(entry); - } - lag->netdev_head = NULL; + ice_lag_destroy_netdev_list(lag, &ndlist); new_vf_unlock: mutex_unlock(&pf->lag_mutex); @@ -679,6 +699,29 @@ static void ice_lag_move_vf_nodes(struct ice_lag *lag, u8 oldport, u8 newport) ice_lag_move_single_vf_nodes(lag, oldport, newport, i); } +/** + * ice_lag_move_vf_nodes_cfg - move vf nodes outside LAG netdev event context + * @lag: local lag struct + * @src_prt: lport value for source port + * @dst_prt: lport value for destination port + * + * This function is used to move nodes during an out-of-netdev-event situation, + * primarily when the driver needs to reconfigure or recreate resources. + * + * Must be called while holding the lag_mutex to avoid lag events from + * processing while out-of-sync moves are happening. Also, paired moves, + * such as used in a reset flow, should both be called under the same mutex + * lock to avoid changes between start of reset and end of reset. + */ +void ice_lag_move_vf_nodes_cfg(struct ice_lag *lag, u8 src_prt, u8 dst_prt) +{ + struct ice_lag_netdev_list ndlist; + + ice_lag_build_netdev_list(lag, &ndlist); + ice_lag_move_vf_nodes(lag, src_prt, dst_prt); + ice_lag_destroy_netdev_list(lag, &ndlist); +} + #define ICE_LAG_SRIOV_CP_RECIPE 10 #define ICE_LAG_SRIOV_TRAIN_PKT_LEN 16 @@ -2051,7 +2094,6 @@ void ice_lag_rebuild(struct ice_pf *pf) { struct ice_lag_netdev_list ndlist; struct ice_lag *lag, *prim_lag; - struct list_head *tmp, *n; u8 act_port, loc_port; if (!pf->lag || !pf->lag->bonded) @@ -2063,21 +2105,7 @@ void ice_lag_rebuild(struct ice_pf *pf) if (lag->primary) { prim_lag = lag; } else { - struct ice_lag_netdev_list *nl; - struct net_device *tmp_nd; - - INIT_LIST_HEAD(&ndlist.node); - rcu_read_lock(); - for_each_netdev_in_bond_rcu(lag->upper_netdev, tmp_nd) { - nl = kzalloc(sizeof(*nl), GFP_ATOMIC); - if (!nl) - break; - - nl->netdev = tmp_nd; - list_add(&nl->node, &ndlist.node); - } - rcu_read_unlock(); - lag->netdev_head = &ndlist.node; + ice_lag_build_netdev_list(lag, &ndlist); prim_lag = ice_lag_find_primary(lag); } @@ -2107,13 +2135,7 @@ void ice_lag_rebuild(struct ice_pf *pf) ice_clear_rdma_cap(pf); lag_rebuild_out: - list_for_each_safe(tmp, n, &ndlist.node) { - struct ice_lag_netdev_list *entry; - - entry = list_entry(tmp, struct ice_lag_netdev_list, node); - list_del(&entry->node); - kfree(entry); - } + ice_lag_destroy_netdev_list(lag, &ndlist); mutex_unlock(&pf->lag_mutex); } diff --git a/drivers/net/ethernet/intel/ice/ice_lag.h b/drivers/net/ethernet/intel/ice/ice_lag.h index 9557e8605a07..ede833dfa658 100644 --- a/drivers/net/ethernet/intel/ice/ice_lag.h +++ b/drivers/net/ethernet/intel/ice/ice_lag.h @@ -65,4 +65,5 @@ int ice_init_lag(struct ice_pf *pf); void ice_deinit_lag(struct ice_pf *pf); void ice_lag_rebuild(struct ice_pf *pf); bool ice_lag_is_switchdev_running(struct ice_pf *pf); +void ice_lag_move_vf_nodes_cfg(struct ice_lag *lag, u8 src_prt, u8 dst_prt); #endif /* _ICE_LAG_H_ */ diff --git a/drivers/net/ethernet/intel/ice/ice_vf_lib.c b/drivers/net/ethernet/intel/ice/ice_vf_lib.c index aca1f2ea5034..b7ae09952156 100644 --- a/drivers/net/ethernet/intel/ice/ice_vf_lib.c +++ b/drivers/net/ethernet/intel/ice/ice_vf_lib.c @@ -829,12 +829,16 @@ static void ice_notify_vf_reset(struct ice_vf *vf) int ice_reset_vf(struct ice_vf *vf, u32 flags) { struct ice_pf *pf = vf->pf; + struct ice_lag *lag; struct ice_vsi *vsi; + u8 act_prt, pri_prt; struct device *dev; int err = 0; bool rsd; dev = ice_pf_to_dev(pf); + act_prt = ICE_LAG_INVALID_PORT; + pri_prt = pf->hw.port_info->lport; if (flags & ICE_VF_RESET_NOTIFY) ice_notify_vf_reset(vf); @@ -845,6 +849,17 @@ int ice_reset_vf(struct ice_vf *vf, u32 flags) return 0; } + lag = pf->lag; + mutex_lock(&pf->lag_mutex); + if (lag && lag->bonded && lag->primary) { + act_prt = lag->active_port; + if (act_prt != pri_prt && act_prt != ICE_LAG_INVALID_PORT && + lag->upper_netdev) + ice_lag_move_vf_nodes_cfg(lag, act_prt, pri_prt); + else + act_prt = ICE_LAG_INVALID_PORT; + } + if (flags & ICE_VF_RESET_LOCK) mutex_lock(&vf->cfg_lock); else @@ -937,6 +952,11 @@ out_unlock: if (flags & ICE_VF_RESET_LOCK) mutex_unlock(&vf->cfg_lock); + if (lag && lag->bonded && lag->primary && + act_prt != ICE_LAG_INVALID_PORT) + ice_lag_move_vf_nodes_cfg(lag, pri_prt, act_prt); + mutex_unlock(&pf->lag_mutex); + return err; } diff --git a/drivers/net/ethernet/intel/ice/ice_virtchnl.c b/drivers/net/ethernet/intel/ice/ice_virtchnl.c index cdf17b1e2f25..de11b3186bd7 100644 --- a/drivers/net/ethernet/intel/ice/ice_virtchnl.c +++ b/drivers/net/ethernet/intel/ice/ice_virtchnl.c @@ -1603,9 +1603,24 @@ static int ice_vc_cfg_qs_msg(struct ice_vf *vf, u8 *msg) (struct virtchnl_vsi_queue_config_info *)msg; struct virtchnl_queue_pair_info *qpi; struct ice_pf *pf = vf->pf; + struct ice_lag *lag; struct ice_vsi *vsi; + u8 act_prt, pri_prt; int i = -1, q_idx; + lag = pf->lag; + mutex_lock(&pf->lag_mutex); + act_prt = ICE_LAG_INVALID_PORT; + pri_prt = pf->hw.port_info->lport; + if (lag && lag->bonded && lag->primary) { + act_prt = lag->active_port; + if (act_prt != pri_prt && act_prt != ICE_LAG_INVALID_PORT && + lag->upper_netdev) + ice_lag_move_vf_nodes_cfg(lag, act_prt, pri_prt); + else + act_prt = ICE_LAG_INVALID_PORT; + } + if (!test_bit(ICE_VF_STATE_ACTIVE, vf->vf_states)) goto error_param; @@ -1729,6 +1744,11 @@ static int ice_vc_cfg_qs_msg(struct ice_vf *vf, u8 *msg) } } + if (lag && lag->bonded && lag->primary && + act_prt != ICE_LAG_INVALID_PORT) + ice_lag_move_vf_nodes_cfg(lag, pri_prt, act_prt); + mutex_unlock(&pf->lag_mutex); + /* send the response to the VF */ return ice_vc_send_msg_to_vf(vf, VIRTCHNL_OP_CONFIG_VSI_QUEUES, VIRTCHNL_STATUS_SUCCESS, NULL, 0); @@ -1743,6 +1763,11 @@ error_param: vf->vf_id, i); } + if (lag && lag->bonded && lag->primary && + act_prt != ICE_LAG_INVALID_PORT) + ice_lag_move_vf_nodes_cfg(lag, pri_prt, act_prt); + mutex_unlock(&pf->lag_mutex); + ice_lag_move_new_vf_nodes(vf); /* send the response to the VF */ -- cgit v1.2.3 From 91fdb30ddfdb651509914d3ed0a0302712540fed Mon Sep 17 00:00:00 2001 From: Jiawen Wu Date: Tue, 28 Nov 2023 17:59:28 +0800 Subject: net: libwx: fix memory leak on msix entry Since pci_free_irq_vectors() set pdev->msix_enabled as 0 in the calling of pci_msix_shutdown(), wx->msix_entries is never freed. Reordering the lines to fix the memory leak. Cc: stable@vger.kernel.org Fixes: 3f703186113f ("net: libwx: Add irq flow functions") Signed-off-by: Jiawen Wu Reviewed-by: Kalesh AP Link: https://lore.kernel.org/r/20231128095928.1083292-1-jiawenwu@trustnetic.com Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/wangxun/libwx/wx_lib.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/wangxun/libwx/wx_lib.c b/drivers/net/ethernet/wangxun/libwx/wx_lib.c index 2823861e5a92..a5a50b5a8816 100644 --- a/drivers/net/ethernet/wangxun/libwx/wx_lib.c +++ b/drivers/net/ethernet/wangxun/libwx/wx_lib.c @@ -1972,11 +1972,11 @@ void wx_reset_interrupt_capability(struct wx *wx) if (!pdev->msi_enabled && !pdev->msix_enabled) return; - pci_free_irq_vectors(wx->pdev); if (pdev->msix_enabled) { kfree(wx->msix_entries); wx->msix_entries = NULL; } + pci_free_irq_vectors(wx->pdev); } EXPORT_SYMBOL(wx_reset_interrupt_capability); -- cgit v1.2.3 From cb9c919364653eeafb49e7ff5cd32f1ad64063ac Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Thu, 30 Nov 2023 11:08:52 +1000 Subject: nouveau/tu102: flush all pdbs on vmm flush This is a hack around a bug exposed with the GSP code, I'm not sure what is happening exactly, but it appears some of our flushes don't result in proper tlb invalidation for out BAR2 and we get a BAR2 fault from GSP and it all dies. Signed-off-by: Dave Airlie Signed-off-by: Danilo Krummrich Link: https://patchwork.freedesktop.org/patch/msgid/20231130010852.4034774-1-airlied@gmail.com --- drivers/gpu/drm/nouveau/nvkm/subdev/mmu/vmmtu102.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/nouveau/nvkm/subdev/mmu/vmmtu102.c b/drivers/gpu/drm/nouveau/nvkm/subdev/mmu/vmmtu102.c index e34bc6076401..8379e72d77ab 100644 --- a/drivers/gpu/drm/nouveau/nvkm/subdev/mmu/vmmtu102.c +++ b/drivers/gpu/drm/nouveau/nvkm/subdev/mmu/vmmtu102.c @@ -31,7 +31,7 @@ tu102_vmm_flush(struct nvkm_vmm *vmm, int depth) type |= 0x00000001; /* PAGE_ALL */ if (atomic_read(&vmm->engref[NVKM_SUBDEV_BAR])) - type |= 0x00000004; /* HUB_ONLY */ + type |= 0x00000006; /* HUB_ONLY | ALL PDB (hack) */ mutex_lock(&vmm->mmu->mutex); -- cgit v1.2.3 From 27d25348d42161837be08fc63b04a2559d2e781c Mon Sep 17 00:00:00 2001 From: Ashwin Dayanand Kamat Date: Wed, 29 Nov 2023 16:10:29 +0530 Subject: x86/sev: Fix kernel crash due to late update to read-only ghcb_version A write-access violation page fault kernel crash was observed while running cpuhotplug LTP testcases on SEV-ES enabled systems. The crash was observed during hotplug, after the CPU was offlined and the process was migrated to different CPU. setup_ghcb() is called again which tries to update ghcb_version in sev_es_negotiate_protocol(). Ideally this is a read_only variable which is initialised during booting. Trying to write it results in a pagefault: BUG: unable to handle page fault for address: ffffffffba556e70 #PF: supervisor write access in kernel mode #PF: error_code(0x0003) - permissions violation [ ...] Call Trace: ? __die_body.cold+0x1a/0x1f ? __die+0x2a/0x35 ? page_fault_oops+0x10c/0x270 ? setup_ghcb+0x71/0x100 ? __x86_return_thunk+0x5/0x6 ? search_exception_tables+0x60/0x70 ? __x86_return_thunk+0x5/0x6 ? fixup_exception+0x27/0x320 ? kernelmode_fixup_or_oops+0xa2/0x120 ? __bad_area_nosemaphore+0x16a/0x1b0 ? kernel_exc_vmm_communication+0x60/0xb0 ? bad_area_nosemaphore+0x16/0x20 ? do_kern_addr_fault+0x7a/0x90 ? exc_page_fault+0xbd/0x160 ? asm_exc_page_fault+0x27/0x30 ? setup_ghcb+0x71/0x100 ? setup_ghcb+0xe/0x100 cpu_init_exception_handling+0x1b9/0x1f0 The fix is to call sev_es_negotiate_protocol() only in the BSP boot phase, and it only needs to be done once in any case. [ mingo: Refined the changelog. ] Fixes: 95d33bfaa3e1 ("x86/sev: Register GHCB memory when SEV-SNP is active") Suggested-by: Tom Lendacky Co-developed-by: Bo Gan Signed-off-by: Bo Gan Signed-off-by: Ashwin Dayanand Kamat Signed-off-by: Ingo Molnar Acked-by: Tom Lendacky Link: https://lore.kernel.org/r/1701254429-18250-1-git-send-email-kashwindayan@vmware.com --- arch/x86/kernel/sev.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) diff --git a/arch/x86/kernel/sev.c b/arch/x86/kernel/sev.c index 70472eebe719..c67285824e82 100644 --- a/arch/x86/kernel/sev.c +++ b/arch/x86/kernel/sev.c @@ -1234,10 +1234,6 @@ void setup_ghcb(void) if (!cc_platform_has(CC_ATTR_GUEST_STATE_ENCRYPT)) return; - /* First make sure the hypervisor talks a supported protocol. */ - if (!sev_es_negotiate_protocol()) - sev_es_terminate(SEV_TERM_SET_GEN, GHCB_SEV_ES_GEN_REQ); - /* * Check whether the runtime #VC exception handler is active. It uses * the per-CPU GHCB page which is set up by sev_es_init_vc_handling(). @@ -1254,6 +1250,13 @@ void setup_ghcb(void) return; } + /* + * Make sure the hypervisor talks a supported protocol. + * This gets called only in the BSP boot phase. + */ + if (!sev_es_negotiate_protocol()) + sev_es_terminate(SEV_TERM_SET_GEN, GHCB_SEV_ES_GEN_REQ); + /* * Clear the boot_ghcb. The first exception comes in before the bss * section is cleared. -- cgit v1.2.3 From d8eb6ea4b302e7ff78535c205510e359ac10a0bd Mon Sep 17 00:00:00 2001 From: Claudiu Beznea Date: Tue, 28 Nov 2023 10:04:34 +0200 Subject: net: ravb: Check return value of reset_control_deassert() reset_control_deassert() could return an error. Some devices cannot work if reset signal de-assert operation fails. To avoid this check the return code of reset_control_deassert() in ravb_probe() and take proper action. Along with it, the free_netdev() call from the error path was moved after reset_control_assert() on its own label (out_free_netdev) to free netdev in case reset_control_deassert() fails. Fixes: 0d13a1a464a0 ("ravb: Add reset support") Reviewed-by: Sergey Shtylyov Reviewed-by: Philipp Zabel Signed-off-by: Claudiu Beznea Signed-off-by: Paolo Abeni --- drivers/net/ethernet/renesas/ravb_main.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/drivers/net/ethernet/renesas/ravb_main.c b/drivers/net/ethernet/renesas/ravb_main.c index 7c007ecd3ff6..35a6b0a26dcd 100644 --- a/drivers/net/ethernet/renesas/ravb_main.c +++ b/drivers/net/ethernet/renesas/ravb_main.c @@ -2654,7 +2654,10 @@ static int ravb_probe(struct platform_device *pdev) ndev->features = info->net_features; ndev->hw_features = info->net_hw_features; - reset_control_deassert(rstc); + error = reset_control_deassert(rstc); + if (error) + goto out_free_netdev; + pm_runtime_enable(&pdev->dev); pm_runtime_get_sync(&pdev->dev); @@ -2881,11 +2884,11 @@ out_disable_gptp_clk: out_disable_refclk: clk_disable_unprepare(priv->refclk); out_release: - free_netdev(ndev); - pm_runtime_put(&pdev->dev); pm_runtime_disable(&pdev->dev); reset_control_assert(rstc); +out_free_netdev: + free_netdev(ndev); return error; } -- cgit v1.2.3 From 88b74831faaee455c2af380382d979fc38e79270 Mon Sep 17 00:00:00 2001 From: Claudiu Beznea Date: Tue, 28 Nov 2023 10:04:35 +0200 Subject: net: ravb: Use pm_runtime_resume_and_get() pm_runtime_get_sync() may return an error. In case it returns with an error dev->power.usage_count needs to be decremented. pm_runtime_resume_and_get() takes care of this. Thus use it. Fixes: c156633f1353 ("Renesas Ethernet AVB driver proper") Reviewed-by: Sergey Shtylyov Signed-off-by: Claudiu Beznea Signed-off-by: Paolo Abeni --- drivers/net/ethernet/renesas/ravb_main.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/renesas/ravb_main.c b/drivers/net/ethernet/renesas/ravb_main.c index 35a6b0a26dcd..96b38d1e39ae 100644 --- a/drivers/net/ethernet/renesas/ravb_main.c +++ b/drivers/net/ethernet/renesas/ravb_main.c @@ -2659,7 +2659,9 @@ static int ravb_probe(struct platform_device *pdev) goto out_free_netdev; pm_runtime_enable(&pdev->dev); - pm_runtime_get_sync(&pdev->dev); + error = pm_runtime_resume_and_get(&pdev->dev); + if (error < 0) + goto out_rpm_disable; if (info->multi_irqs) { if (info->err_mgmt_irqs) @@ -2885,6 +2887,7 @@ out_disable_refclk: clk_disable_unprepare(priv->refclk); out_release: pm_runtime_put(&pdev->dev); +out_rpm_disable: pm_runtime_disable(&pdev->dev); reset_control_assert(rstc); out_free_netdev: -- cgit v1.2.3 From d78c0ced60d5e2f8b5a4a0468a5c400b24aeadf2 Mon Sep 17 00:00:00 2001 From: Claudiu Beznea Date: Tue, 28 Nov 2023 10:04:36 +0200 Subject: net: ravb: Make write access to CXR35 first before accessing other EMAC registers MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Hardware manual of RZ/G3S (and RZ/G2L) specifies the following on the description of CXR35 register (chapter "PHY interface select register (CXR35)"): "After release reset, make write-access to this register before making write-access to other registers (except MDIOMOD). Even if not need to change the value of this register, make write-access to this register at least one time. Because RGMII/MII MODE is recognized by accessing this register". The setup procedure for EMAC module (chapter "Setup procedure" of RZ/G3S, RZ/G2L manuals) specifies the E-MAC.CXR35 register is the first EMAC register that is to be configured. Note [A] from chapter "PHY interface select register (CXR35)" specifies the following: [A] The case which CXR35 SEL_XMII is used for the selection of RGMII/MII in APB Clock 100 MHz. (1) To use RGMII interface, Set ‘H’03E8_0000’ to this register. (2) To use MII interface, Set ‘H’03E8_0002’ to this register. Take into account these indication. Fixes: 1089877ada8d ("ravb: Add RZ/G2L MII interface support") Reviewed-by: Sergey Shtylyov Signed-off-by: Claudiu Beznea Signed-off-by: Paolo Abeni --- drivers/net/ethernet/renesas/ravb_main.c | 17 +++++++++-------- 1 file changed, 9 insertions(+), 8 deletions(-) diff --git a/drivers/net/ethernet/renesas/ravb_main.c b/drivers/net/ethernet/renesas/ravb_main.c index 96b38d1e39ae..4d57ecfdfe61 100644 --- a/drivers/net/ethernet/renesas/ravb_main.c +++ b/drivers/net/ethernet/renesas/ravb_main.c @@ -515,6 +515,15 @@ static void ravb_emac_init_gbeth(struct net_device *ndev) { struct ravb_private *priv = netdev_priv(ndev); + if (priv->phy_interface == PHY_INTERFACE_MODE_MII) { + ravb_write(ndev, (1000 << 16) | CXR35_SEL_XMII_MII, CXR35); + ravb_modify(ndev, CXR31, CXR31_SEL_LINK0 | CXR31_SEL_LINK1, 0); + } else { + ravb_write(ndev, (1000 << 16) | CXR35_SEL_XMII_RGMII, CXR35); + ravb_modify(ndev, CXR31, CXR31_SEL_LINK0 | CXR31_SEL_LINK1, + CXR31_SEL_LINK0); + } + /* Receive frame limit set register */ ravb_write(ndev, GBETH_RX_BUFF_MAX + ETH_FCS_LEN, RFLR); @@ -537,14 +546,6 @@ static void ravb_emac_init_gbeth(struct net_device *ndev) /* E-MAC interrupt enable register */ ravb_write(ndev, ECSIPR_ICDIP, ECSIPR); - - if (priv->phy_interface == PHY_INTERFACE_MODE_MII) { - ravb_modify(ndev, CXR31, CXR31_SEL_LINK0 | CXR31_SEL_LINK1, 0); - ravb_write(ndev, (1000 << 16) | CXR35_SEL_XMII_MII, CXR35); - } else { - ravb_modify(ndev, CXR31, CXR31_SEL_LINK0 | CXR31_SEL_LINK1, - CXR31_SEL_LINK0); - } } static void ravb_emac_init_rcar(struct net_device *ndev) -- cgit v1.2.3 From 6f32c086602050fc11157adeafaa1c1eb393f0af Mon Sep 17 00:00:00 2001 From: Claudiu Beznea Date: Tue, 28 Nov 2023 10:04:37 +0200 Subject: net: ravb: Start TX queues after HW initialization succeeded ravb_phy_start() may fail. If that happens, the TX queues will remain started. Thus, move the netif_tx_start_all_queues() after PHY is successfully initialized. Fixes: c156633f1353 ("Renesas Ethernet AVB driver proper") Reviewed-by: Sergey Shtylyov Signed-off-by: Claudiu Beznea Reviewed-by: Kalesh AP Signed-off-by: Paolo Abeni --- drivers/net/ethernet/renesas/ravb_main.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/renesas/ravb_main.c b/drivers/net/ethernet/renesas/ravb_main.c index 4d57ecfdfe61..5f1fb94c5ab7 100644 --- a/drivers/net/ethernet/renesas/ravb_main.c +++ b/drivers/net/ethernet/renesas/ravb_main.c @@ -1812,13 +1812,13 @@ static int ravb_open(struct net_device *ndev) if (info->gptp) ravb_ptp_init(ndev, priv->pdev); - netif_tx_start_all_queues(ndev); - /* PHY control start */ error = ravb_phy_start(ndev); if (error) goto out_ptp_stop; + netif_tx_start_all_queues(ndev); + return 0; out_ptp_stop: -- cgit v1.2.3 From eac16a733427ba0de2449ffc7bd3da32ddb65cb7 Mon Sep 17 00:00:00 2001 From: Claudiu Beznea Date: Tue, 28 Nov 2023 10:04:38 +0200 Subject: net: ravb: Stop DMA in case of failures on ravb_open() In case ravb_phy_start() returns with error the settings applied in ravb_dmac_init() are not reverted (e.g. config mode). For this call ravb_stop_dma() on failure path of ravb_open(). Fixes: a0d2f20650e8 ("Renesas Ethernet AVB PTP clock driver") Reviewed-by: Sergey Shtylyov Signed-off-by: Claudiu Beznea Signed-off-by: Paolo Abeni --- drivers/net/ethernet/renesas/ravb_main.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/ethernet/renesas/ravb_main.c b/drivers/net/ethernet/renesas/ravb_main.c index 5f1fb94c5ab7..6c9e92676106 100644 --- a/drivers/net/ethernet/renesas/ravb_main.c +++ b/drivers/net/ethernet/renesas/ravb_main.c @@ -1825,6 +1825,7 @@ out_ptp_stop: /* Stop PTP Clock driver */ if (info->gptp) ravb_ptp_stop(ndev); + ravb_stop_dma(ndev); out_free_irq_mgmta: if (!info->multi_irqs) goto out_free_irq; -- cgit v1.2.3 From edf9bc396e05081ca281ffb0cd41e44db478ff26 Mon Sep 17 00:00:00 2001 From: Claudiu Beznea Date: Tue, 28 Nov 2023 10:04:39 +0200 Subject: net: ravb: Keep reverse order of operations in ravb_remove() On RZ/G3S SMARC Carrier II board having RGMII connections b/w Ethernet MACs and PHYs it has been discovered that doing unbind/bind for ravb driver in a loop leads to wrong speed and duplex for Ethernet links and broken connectivity (the connectivity cannot be restored even with bringing interface down/up). Before doing unbind/bind the Ethernet interfaces were configured though systemd. The sh instructions used to do unbind/bind were: $ cd /sys/bus/platform/drivers/ravb/ $ while :; do echo 11c30000.ethernet > unbind ; \ echo 11c30000.ethernet > bind; done It has been discovered that there is a race b/w IOCTLs initialized by systemd at the response of success binding and the "ravb_write(ndev, CCC_OPC_RESET, CCC)" call in ravb_remove() as follows: 1/ as a result of bind success the user space open/configures the interfaces tough an IOCTL; the following stack trace has been identified on RZ/G3S: Call trace: dump_backtrace+0x9c/0x100 show_stack+0x20/0x38 dump_stack_lvl+0x48/0x60 dump_stack+0x18/0x28 ravb_open+0x70/0xa58 __dev_open+0xf4/0x1e8 __dev_change_flags+0x198/0x218 dev_change_flags+0x2c/0x80 devinet_ioctl+0x640/0x708 inet_ioctl+0x1e4/0x200 sock_do_ioctl+0x50/0x108 sock_ioctl+0x240/0x358 __arm64_sys_ioctl+0xb0/0x100 invoke_syscall+0x50/0x128 el0_svc_common.constprop.0+0xc8/0xf0 do_el0_svc+0x24/0x38 el0_svc+0x34/0xb8 el0t_64_sync_handler+0xc0/0xc8 el0t_64_sync+0x190/0x198 2/ this call may execute concurrently with ravb_remove() as the unbind/bind operation was executed in a loop 3/ if the operation mode is changed to RESET (through ravb_write(ndev, CCC_OPC_RESET, CCC) call in ravb_remove()) while the above ravb_open() is in progress it may lead to MAC (or PHY, or MAC-PHY connection, the right point hasn't been identified at the moment) to be broken, thus the Ethernet connectivity fails to restore. The simple fix for this is to move ravb_write(ndev, CCC_OPC_RESET, CCC)) after unregister_netdev() to avoid resetting the controller while the netdev interface is still registered. To avoid future issues in ravb_remove(), the patch follows the proper order of operations in ravb_remove(): reverse order compared with ravb_probe(). This avoids described races as the IOCTLs as well as unregister_netdev() (called now at the beginning of ravb_remove()) calls rtnl_lock() before continuing and IOCTLs check (though devinet_ioctl()) if device is still registered just after taking the lock: int devinet_ioctl(struct net *net, unsigned int cmd, struct ifreq *ifr) { // ... rtnl_lock(); ret = -ENODEV; dev = __dev_get_by_name(net, ifr->ifr_name); if (!dev) goto done; // ... done: rtnl_unlock(); out: return ret; } Fixes: c156633f1353 ("Renesas Ethernet AVB driver proper") Reviewed-by: Sergey Shtylyov Signed-off-by: Claudiu Beznea Signed-off-by: Paolo Abeni --- drivers/net/ethernet/renesas/ravb_main.c | 22 +++++++++++++--------- 1 file changed, 13 insertions(+), 9 deletions(-) diff --git a/drivers/net/ethernet/renesas/ravb_main.c b/drivers/net/ethernet/renesas/ravb_main.c index 6c9e92676106..664eda4b5a11 100644 --- a/drivers/net/ethernet/renesas/ravb_main.c +++ b/drivers/net/ethernet/renesas/ravb_main.c @@ -2903,22 +2903,26 @@ static void ravb_remove(struct platform_device *pdev) struct ravb_private *priv = netdev_priv(ndev); const struct ravb_hw_info *info = priv->info; - /* Stop PTP Clock driver */ - if (info->ccc_gac) - ravb_ptp_stop(ndev); - - clk_disable_unprepare(priv->gptp_clk); - clk_disable_unprepare(priv->refclk); - - /* Set reset mode */ - ravb_write(ndev, CCC_OPC_RESET, CCC); unregister_netdev(ndev); if (info->nc_queues) netif_napi_del(&priv->napi[RAVB_NC]); netif_napi_del(&priv->napi[RAVB_BE]); + ravb_mdio_release(priv); + + /* Stop PTP Clock driver */ + if (info->ccc_gac) + ravb_ptp_stop(ndev); + dma_free_coherent(ndev->dev.parent, priv->desc_bat_size, priv->desc_bat, priv->desc_bat_dma); + + /* Set reset mode */ + ravb_write(ndev, CCC_OPC_RESET, CCC); + + clk_disable_unprepare(priv->gptp_clk); + clk_disable_unprepare(priv->refclk); + pm_runtime_put_sync(&pdev->dev); pm_runtime_disable(&pdev->dev); reset_control_assert(priv->rstc); -- cgit v1.2.3 From 7701ce26c747322de1f1a87f8e32792582f33249 Mon Sep 17 00:00:00 2001 From: Adrián Larumbe Date: Sat, 25 Nov 2023 20:52:02 +0000 Subject: drm/panfrost: Consider dma-buf imported objects as resident MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit A GEM object constructed from a dma-buf imported sgtable should be regarded as being memory resident, because the dma-buf API mandates backing storage to be allocated when attachment succeeds. Signed-off-by: Adrián Larumbe Fixes: 9ccdac7aa822 ("drm/panfrost: Add fdinfo support for memory stats") Reported-by: Boris Brezillon Reviewed-by: Steven Price Signed-off-by: Steven Price Link: https://patchwork.freedesktop.org/patch/msgid/20231125205438.375407-2-adrian.larumbe@collabora.com --- drivers/gpu/drm/panfrost/panfrost_gem.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/panfrost/panfrost_gem.c b/drivers/gpu/drm/panfrost/panfrost_gem.c index 0cf64456e29a..d47b40b82b0b 100644 --- a/drivers/gpu/drm/panfrost/panfrost_gem.c +++ b/drivers/gpu/drm/panfrost/panfrost_gem.c @@ -200,7 +200,7 @@ static enum drm_gem_object_status panfrost_gem_status(struct drm_gem_object *obj struct panfrost_gem_object *bo = to_panfrost_bo(obj); enum drm_gem_object_status res = 0; - if (bo->base.pages) + if (bo->base.base.import_attach || bo->base.pages) res |= DRM_GEM_OBJECT_RESIDENT; if (bo->base.madv == PANFROST_MADV_DONTNEED) -- cgit v1.2.3 From 64111a0e22a9d4e0de7a5d04e7d5c21d0af4b900 Mon Sep 17 00:00:00 2001 From: Adrián Larumbe Date: Sat, 25 Nov 2023 20:52:03 +0000 Subject: drm/panfrost: Fix incorrect updating of current device frequency MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit It was noticed when setting the Panfrost's DVFS device to the performant governor, GPU frequency as reported by fdinfo had dropped to 0 permamently. There are two separate issues causing this behaviour: - Not initialising the device's current_frequency variable to its original value during device probe(). - Updating said variable in Panfrost devfreq's get_dev_status() rather than after the new OPP's frequency had been retrieved in target(), which meant the old frequency would be assigned instead. Signed-off-by: Adrián Larumbe Fixes: f11b0417eec2 ("drm/panfrost: Add fdinfo support GPU load metrics") Reviewed-by: Steven Price Signed-off-by: Steven Price Link: https://patchwork.freedesktop.org/patch/msgid/20231125205438.375407-3-adrian.larumbe@collabora.com --- drivers/gpu/drm/panfrost/panfrost_devfreq.c | 17 +++++++++++++++-- 1 file changed, 15 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/panfrost/panfrost_devfreq.c b/drivers/gpu/drm/panfrost/panfrost_devfreq.c index f59c82ea8870..2d30da38c2c3 100644 --- a/drivers/gpu/drm/panfrost/panfrost_devfreq.c +++ b/drivers/gpu/drm/panfrost/panfrost_devfreq.c @@ -29,14 +29,20 @@ static void panfrost_devfreq_update_utilization(struct panfrost_devfreq *pfdevfr static int panfrost_devfreq_target(struct device *dev, unsigned long *freq, u32 flags) { + struct panfrost_device *ptdev = dev_get_drvdata(dev); struct dev_pm_opp *opp; + int err; opp = devfreq_recommended_opp(dev, freq, flags); if (IS_ERR(opp)) return PTR_ERR(opp); dev_pm_opp_put(opp); - return dev_pm_opp_set_rate(dev, *freq); + err = dev_pm_opp_set_rate(dev, *freq); + if (!err) + ptdev->pfdevfreq.current_frequency = *freq; + + return err; } static void panfrost_devfreq_reset(struct panfrost_devfreq *pfdevfreq) @@ -58,7 +64,6 @@ static int panfrost_devfreq_get_dev_status(struct device *dev, spin_lock_irqsave(&pfdevfreq->lock, irqflags); panfrost_devfreq_update_utilization(pfdevfreq); - pfdevfreq->current_frequency = status->current_frequency; status->total_time = ktime_to_ns(ktime_add(pfdevfreq->busy_time, pfdevfreq->idle_time)); @@ -164,6 +169,14 @@ int panfrost_devfreq_init(struct panfrost_device *pfdev) panfrost_devfreq_profile.initial_freq = cur_freq; + /* + * We could wait until panfrost_devfreq_target() to set this value, but + * since the simple_ondemand governor works asynchronously, there's a + * chance by the time someone opens the device's fdinfo file, current + * frequency hasn't been updated yet, so let's just do an early set. + */ + pfdevfreq->current_frequency = cur_freq; + /* * Set the recommend OPP this will enable and configure the regulator * if any and will avoid a switch off by regulator_late_cleanup() -- cgit v1.2.3 From cbf54f37600e874d82886aa3b2f471778cae01ce Mon Sep 17 00:00:00 2001 From: Armin Wolf Date: Wed, 29 Nov 2023 19:16:54 +0100 Subject: platform/x86: wmi: Skip blocks with zero instances MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Some machines like the HP Omen 17 ck2000nf contain WMI blocks with zero instances, so any WMI driver which tries to handle the associated WMI device will fail. Skip such WMI blocks to avoid confusing any WMI drivers. Reported-by: Alexis Belmonte Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218188 Fixes: bff431e49ff5 ("ACPI: WMI: Add ACPI-WMI mapping driver") Tested-by: Alexis Belmonte Signed-off-by: Armin Wolf Link: https://lore.kernel.org/r/20231129181654.5800-1-W_Armin@gmx.de Reviewed-by: Ilpo Järvinen Signed-off-by: Ilpo Järvinen --- drivers/platform/x86/wmi.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/platform/x86/wmi.c b/drivers/platform/x86/wmi.c index 5c27b4aa9690..5dd22258cb3b 100644 --- a/drivers/platform/x86/wmi.c +++ b/drivers/platform/x86/wmi.c @@ -1340,6 +1340,11 @@ static int parse_wdg(struct device *wmi_bus_dev, struct platform_device *pdev) if (debug_dump_wdg) wmi_dump_wdg(&gblock[i]); + if (!gblock[i].instance_count) { + dev_info(wmi_bus_dev, FW_INFO "%pUL has zero instances\n", &gblock[i].guid); + continue; + } + if (guid_already_parsed_for_legacy(device, &gblock[i].guid)) continue; -- cgit v1.2.3 From a337c355719c42a6c5b67e985ad753590ed844fb Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Thu, 30 Nov 2023 16:13:21 +0100 Subject: ALSA: hda: Disable power-save on KONTRON SinglePC It's been reported that the runtime PM on KONTRON SinglePC (PCI SSID 1734:1232) caused a stall of playback after a bunch of invocations. (FWIW, this looks like an timing issue, and the stall happens rather on the controller side.) As a workaround, disable the default power-save on this platform. Cc: Link: https://lore.kernel.org/r/20231130151321.9813-1-tiwai@suse.de Signed-off-by: Takashi Iwai --- sound/pci/hda/hda_intel.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c index db90feb49c16..2d1df3654424 100644 --- a/sound/pci/hda/hda_intel.c +++ b/sound/pci/hda/hda_intel.c @@ -2242,6 +2242,8 @@ static const struct snd_pci_quirk power_save_denylist[] = { SND_PCI_QUIRK(0x17aa, 0x36a7, "Lenovo C50 All in one", 0), /* https://bugs.launchpad.net/bugs/1821663 */ SND_PCI_QUIRK(0x1631, 0xe017, "Packard Bell NEC IMEDIA 5204", 0), + /* KONTRON SinglePC may cause a stall at runtime resume */ + SND_PCI_QUIRK(0x1734, 0x1232, "KONTRON SinglePC", 0), {} }; #endif /* CONFIG_PM */ -- cgit v1.2.3 From 0015eb6e12384ff1c589928e84deac2ad1ceb236 Mon Sep 17 00:00:00 2001 From: Dmitry Antipov Date: Tue, 28 Nov 2023 13:53:47 +0300 Subject: smb: client, common: fix fortify warnings When compiling with gcc version 14.0.0 20231126 (experimental) and CONFIG_FORTIFY_SOURCE=y, I've noticed the following: In file included from ./include/linux/string.h:295, from ./include/linux/bitmap.h:12, from ./include/linux/cpumask.h:12, from ./arch/x86/include/asm/paravirt.h:17, from ./arch/x86/include/asm/cpuid.h:62, from ./arch/x86/include/asm/processor.h:19, from ./arch/x86/include/asm/cpufeature.h:5, from ./arch/x86/include/asm/thread_info.h:53, from ./include/linux/thread_info.h:60, from ./arch/x86/include/asm/preempt.h:9, from ./include/linux/preempt.h:79, from ./include/linux/spinlock.h:56, from ./include/linux/wait.h:9, from ./include/linux/wait_bit.h:8, from ./include/linux/fs.h:6, from fs/smb/client/smb2pdu.c:18: In function 'fortify_memcpy_chk', inlined from '__SMB2_close' at fs/smb/client/smb2pdu.c:3480:4: ./include/linux/fortify-string.h:588:25: warning: call to '__read_overflow2_field' declared with attribute warning: detected read beyond size of field (2nd parameter); maybe use struct_group()? [-Wattribute-warning] 588 | __read_overflow2_field(q_size_field, size); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ and: In file included from ./include/linux/string.h:295, from ./include/linux/bitmap.h:12, from ./include/linux/cpumask.h:12, from ./arch/x86/include/asm/paravirt.h:17, from ./arch/x86/include/asm/cpuid.h:62, from ./arch/x86/include/asm/processor.h:19, from ./arch/x86/include/asm/cpufeature.h:5, from ./arch/x86/include/asm/thread_info.h:53, from ./include/linux/thread_info.h:60, from ./arch/x86/include/asm/preempt.h:9, from ./include/linux/preempt.h:79, from ./include/linux/spinlock.h:56, from ./include/linux/wait.h:9, from ./include/linux/wait_bit.h:8, from ./include/linux/fs.h:6, from fs/smb/client/cifssmb.c:17: In function 'fortify_memcpy_chk', inlined from 'CIFS_open' at fs/smb/client/cifssmb.c:1248:3: ./include/linux/fortify-string.h:588:25: warning: call to '__read_overflow2_field' declared with attribute warning: detected read beyond size of field (2nd parameter); maybe use struct_group()? [-Wattribute-warning] 588 | __read_overflow2_field(q_size_field, size); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ In both cases, the fortification logic inteprets calls to 'memcpy()' as an attempts to copy an amount of data which exceeds the size of the specified field (i.e. more than 8 bytes from __le64 value) and thus issues an overread warning. Both of these warnings may be silenced by using the convenient 'struct_group()' quirk. Signed-off-by: Dmitry Antipov Acked-by: Namjae Jeon Signed-off-by: Steve French --- fs/smb/client/cifspdu.h | 24 ++++++++++++++---------- fs/smb/client/cifssmb.c | 6 ++++-- fs/smb/client/smb2pdu.c | 8 +++----- fs/smb/client/smb2pdu.h | 16 +++++++++------- fs/smb/common/smb2pdu.h | 17 ++++++++++------- 5 files changed, 40 insertions(+), 31 deletions(-) diff --git a/fs/smb/client/cifspdu.h b/fs/smb/client/cifspdu.h index 83ccc51a54d0..c0513fbb8a59 100644 --- a/fs/smb/client/cifspdu.h +++ b/fs/smb/client/cifspdu.h @@ -882,11 +882,13 @@ typedef struct smb_com_open_rsp { __u8 OplockLevel; __u16 Fid; __le32 CreateAction; - __le64 CreationTime; - __le64 LastAccessTime; - __le64 LastWriteTime; - __le64 ChangeTime; - __le32 FileAttributes; + struct_group(common_attributes, + __le64 CreationTime; + __le64 LastAccessTime; + __le64 LastWriteTime; + __le64 ChangeTime; + __le32 FileAttributes; + ); __le64 AllocationSize; __le64 EndOfFile; __le16 FileType; @@ -2264,11 +2266,13 @@ typedef struct { /* QueryFileInfo/QueryPathinfo (also for SetPath/SetFile) data buffer formats */ /******************************************************************************/ typedef struct { /* data block encoding of response to level 263 QPathInfo */ - __le64 CreationTime; - __le64 LastAccessTime; - __le64 LastWriteTime; - __le64 ChangeTime; - __le32 Attributes; + struct_group(common_attributes, + __le64 CreationTime; + __le64 LastAccessTime; + __le64 LastWriteTime; + __le64 ChangeTime; + __le32 Attributes; + ); __u32 Pad1; __le64 AllocationSize; __le64 EndOfFile; /* size ie offset to first free byte in file */ diff --git a/fs/smb/client/cifssmb.c b/fs/smb/client/cifssmb.c index bad91ba6c3a9..9ee348e6d106 100644 --- a/fs/smb/client/cifssmb.c +++ b/fs/smb/client/cifssmb.c @@ -1244,8 +1244,10 @@ openRetry: *oplock |= CIFS_CREATE_ACTION; if (buf) { - /* copy from CreationTime to Attributes */ - memcpy((char *)buf, (char *)&rsp->CreationTime, 36); + /* copy commonly used attributes */ + memcpy(&buf->common_attributes, + &rsp->common_attributes, + sizeof(buf->common_attributes)); /* the file_info buf is endian converted by caller */ buf->AllocationSize = rsp->AllocationSize; buf->EndOfFile = rsp->EndOfFile; diff --git a/fs/smb/client/smb2pdu.c b/fs/smb/client/smb2pdu.c index 2eb29fa278c3..395e1230ddbc 100644 --- a/fs/smb/client/smb2pdu.c +++ b/fs/smb/client/smb2pdu.c @@ -3472,12 +3472,10 @@ __SMB2_close(const unsigned int xid, struct cifs_tcon *tcon, } else { trace_smb3_close_done(xid, persistent_fid, tcon->tid, ses->Suid); - /* - * Note that have to subtract 4 since struct network_open_info - * has a final 4 byte pad that close response does not have - */ if (pbuf) - memcpy(pbuf, (char *)&rsp->CreationTime, sizeof(*pbuf) - 4); + memcpy(&pbuf->network_open_info, + &rsp->network_open_info, + sizeof(pbuf->network_open_info)); } atomic_dec(&tcon->num_remote_opens); diff --git a/fs/smb/client/smb2pdu.h b/fs/smb/client/smb2pdu.h index 220994d0a0f7..db08194484e0 100644 --- a/fs/smb/client/smb2pdu.h +++ b/fs/smb/client/smb2pdu.h @@ -319,13 +319,15 @@ struct smb2_file_reparse_point_info { } __packed; struct smb2_file_network_open_info { - __le64 CreationTime; - __le64 LastAccessTime; - __le64 LastWriteTime; - __le64 ChangeTime; - __le64 AllocationSize; - __le64 EndOfFile; - __le32 Attributes; + struct_group(network_open_info, + __le64 CreationTime; + __le64 LastAccessTime; + __le64 LastWriteTime; + __le64 ChangeTime; + __le64 AllocationSize; + __le64 EndOfFile; + __le32 Attributes; + ); __le32 Reserved; } __packed; /* level 34 Query also similar returned in close rsp and open rsp */ diff --git a/fs/smb/common/smb2pdu.h b/fs/smb/common/smb2pdu.h index 8983f45f8430..9fbaaa387dcc 100644 --- a/fs/smb/common/smb2pdu.h +++ b/fs/smb/common/smb2pdu.h @@ -702,13 +702,16 @@ struct smb2_close_rsp { __le16 StructureSize; /* 60 */ __le16 Flags; __le32 Reserved; - __le64 CreationTime; - __le64 LastAccessTime; - __le64 LastWriteTime; - __le64 ChangeTime; - __le64 AllocationSize; /* Beginning of FILE_STANDARD_INFO equivalent */ - __le64 EndOfFile; - __le32 Attributes; + struct_group(network_open_info, + __le64 CreationTime; + __le64 LastAccessTime; + __le64 LastWriteTime; + __le64 ChangeTime; + /* Beginning of FILE_STANDARD_INFO equivalent */ + __le64 AllocationSize; + __le64 EndOfFile; + __le32 Attributes; + ); } __packed; -- cgit v1.2.3 From 4ea95c04fa6b9043a1a301240996aeebe3cb28ec Mon Sep 17 00:00:00 2001 From: Sean Christopherson Date: Wed, 29 Nov 2023 16:10:00 -0800 Subject: vfio: Drop vfio_file_iommu_group() stub to fudge around a KVM wart Drop the vfio_file_iommu_group() stub and instead unconditionally declare the function to fudge around a KVM wart where KVM tries to do symbol_get() on vfio_file_iommu_group() (and other VFIO symbols) even if CONFIG_VFIO=n. Ensuring the symbol is always declared fixes a PPC build error when modules are also disabled, in which case symbol_get() simply points at the address of the symbol (with some attributes shenanigans). Because KVM does symbol_get() instead of directly depending on VFIO, the lack of a fully defined symbol is not problematic (ugly, but "fine"). arch/powerpc/kvm/../../../virt/kvm/vfio.c:89:7: error: attribute declaration must precede definition [-Werror,-Wignored-attributes] fn = symbol_get(vfio_file_iommu_group); ^ include/linux/module.h:805:60: note: expanded from macro 'symbol_get' #define symbol_get(x) ({ extern typeof(x) x __attribute__((weak,visibility("hidden"))); &(x); }) ^ include/linux/vfio.h:294:35: note: previous definition is here static inline struct iommu_group *vfio_file_iommu_group(struct file *file) ^ arch/powerpc/kvm/../../../virt/kvm/vfio.c:89:7: error: attribute declaration must precede definition [-Werror,-Wignored-attributes] fn = symbol_get(vfio_file_iommu_group); ^ include/linux/module.h:805:65: note: expanded from macro 'symbol_get' #define symbol_get(x) ({ extern typeof(x) x __attribute__((weak,visibility("hidden"))); &(x); }) ^ include/linux/vfio.h:294:35: note: previous definition is here static inline struct iommu_group *vfio_file_iommu_group(struct file *file) ^ 2 errors generated. Although KVM is firmly in the wrong (there is zero reason for KVM to build virt/kvm/vfio.c when VFIO is disabled), fudge around the error in VFIO as the stub is unnecessary and doesn't serve its intended purpose (KVM is the only external user of vfio_file_iommu_group()), and there is an in-flight series to clean up the entire KVM<->VFIO interaction, i.e. fixing this in KVM would result in more churn in the long run, and the stub needs to go away regardless. Reported-by: kernel test robot Closes: https://lore.kernel.org/oe-kbuild-all/202308251949.5IiaV0sz-lkp@intel.com Closes: https://lore.kernel.org/oe-kbuild-all/202309030741.82aLACDG-lkp@intel.com Closes: https://lore.kernel.org/oe-kbuild-all/202309110914.QLH0LU6L-lkp@intel.com Link: https://lore.kernel.org/all/0-v1-08396538817d+13c5-vfio_kvm_kconfig_jgg@nvidia.com Link: https://lore.kernel.org/all/20230916003118.2540661-1-seanjc@google.com Cc: Nick Desaulniers Cc: Jason Gunthorpe Tested-by: Michael Ellerman Fixes: c1cce6d079b8 ("vfio: Compile vfio_group infrastructure optionally") Signed-off-by: Sean Christopherson Reviewed-by: Jason Gunthorpe Link: https://lore.kernel.org/r/20231130001000.543240-1-seanjc@google.com Signed-off-by: Alex Williamson --- include/linux/vfio.h | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-) diff --git a/include/linux/vfio.h b/include/linux/vfio.h index 454e9295970c..a65b2513f8cd 100644 --- a/include/linux/vfio.h +++ b/include/linux/vfio.h @@ -289,16 +289,12 @@ void vfio_combine_iova_ranges(struct rb_root_cached *root, u32 cur_nodes, /* * External user API */ -#if IS_ENABLED(CONFIG_VFIO_GROUP) struct iommu_group *vfio_file_iommu_group(struct file *file); + +#if IS_ENABLED(CONFIG_VFIO_GROUP) bool vfio_file_is_group(struct file *file); bool vfio_file_has_dev(struct file *file, struct vfio_device *device); #else -static inline struct iommu_group *vfio_file_iommu_group(struct file *file) -{ - return NULL; -} - static inline bool vfio_file_is_group(struct file *file) { return false; -- cgit v1.2.3 From f5259997f3e8d6edfcc2daf5b2c0b34f074d7bc0 Mon Sep 17 00:00:00 2001 From: Ard Biesheuvel Date: Mon, 27 Nov 2023 13:00:51 +0100 Subject: arm64: Avoid enabling KPTI unnecessarily Commit 42c5a3b04bf6 refactored the KPTI init code in a way that results in the use of non-global kernel mappings even on systems that have no need for it, and even when KPTI has been disabled explicitly via the command line. Ensure that this only happens when we have decided (based on the detected system-wide CPU features) that KPTI should be enabled. Fixes: 42c5a3b04bf6 ("arm64: Split kpti_install_ng_mappings()") Signed-off-by: Ard Biesheuvel Acked-by: Will Deacon Acked-by: Mark Rutland Link: https://lore.kernel.org/r/20231127120049.2258650-6-ardb@google.com Signed-off-by: Catalin Marinas --- arch/arm64/kernel/cpufeature.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/arm64/kernel/cpufeature.c b/arch/arm64/kernel/cpufeature.c index 646591c67e7a..91d2d6714969 100644 --- a/arch/arm64/kernel/cpufeature.c +++ b/arch/arm64/kernel/cpufeature.c @@ -1839,6 +1839,10 @@ static int __init __kpti_install_ng_mappings(void *__unused) static void __init kpti_install_ng_mappings(void) { + /* Check whether KPTI is going to be used */ + if (!cpus_have_cap(ARM64_UNMAP_KERNEL_AT_EL0)) + return; + /* * We don't need to rewrite the page-tables if either we've done * it already or we have KASLR enabled and therefore have not -- cgit v1.2.3 From 0514f63cfff38a0dcb7ba9c5f245827edc0c5107 Mon Sep 17 00:00:00 2001 From: Felix Kuehling Date: Fri, 17 Nov 2023 16:44:17 -0500 Subject: Revert "drm/prime: Unexport helpers for fd/handle conversion" MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This reverts commit 71a7974ac7019afeec105a54447ae1dc7216cbb3. These helper functions are needed for KFD to export and import DMABufs the right way without duplicating the tracking of DMABufs associated with GEM objects while ensuring that move notifier callbacks are working as intended. CC: Christian König CC: Thomas Zimmermann Acked-by: Thomas Zimmermann Acked-by: Daniel Vetter Signed-off-by: Felix Kuehling Signed-off-by: Alex Deucher --- drivers/gpu/drm/drm_prime.c | 33 ++++++++++++++++++--------------- include/drm/drm_prime.h | 7 +++++++ 2 files changed, 25 insertions(+), 15 deletions(-) diff --git a/drivers/gpu/drm/drm_prime.c b/drivers/gpu/drm/drm_prime.c index 63b709a67471..834a5e28abbe 100644 --- a/drivers/gpu/drm/drm_prime.c +++ b/drivers/gpu/drm/drm_prime.c @@ -278,7 +278,7 @@ void drm_gem_dmabuf_release(struct dma_buf *dma_buf) } EXPORT_SYMBOL(drm_gem_dmabuf_release); -/* +/** * drm_gem_prime_fd_to_handle - PRIME import function for GEM drivers * @dev: drm_device to import into * @file_priv: drm file-private structure @@ -292,9 +292,9 @@ EXPORT_SYMBOL(drm_gem_dmabuf_release); * * Returns 0 on success or a negative error code on failure. */ -static int drm_gem_prime_fd_to_handle(struct drm_device *dev, - struct drm_file *file_priv, int prime_fd, - uint32_t *handle) +int drm_gem_prime_fd_to_handle(struct drm_device *dev, + struct drm_file *file_priv, int prime_fd, + uint32_t *handle) { struct dma_buf *dma_buf; struct drm_gem_object *obj; @@ -360,6 +360,7 @@ out_put: dma_buf_put(dma_buf); return ret; } +EXPORT_SYMBOL(drm_gem_prime_fd_to_handle); int drm_prime_fd_to_handle_ioctl(struct drm_device *dev, void *data, struct drm_file *file_priv) @@ -408,7 +409,7 @@ static struct dma_buf *export_and_register_object(struct drm_device *dev, return dmabuf; } -/* +/** * drm_gem_prime_handle_to_fd - PRIME export function for GEM drivers * @dev: dev to export the buffer from * @file_priv: drm file-private structure @@ -421,10 +422,10 @@ static struct dma_buf *export_and_register_object(struct drm_device *dev, * The actual exporting from GEM object to a dma-buf is done through the * &drm_gem_object_funcs.export callback. */ -static int drm_gem_prime_handle_to_fd(struct drm_device *dev, - struct drm_file *file_priv, uint32_t handle, - uint32_t flags, - int *prime_fd) +int drm_gem_prime_handle_to_fd(struct drm_device *dev, + struct drm_file *file_priv, uint32_t handle, + uint32_t flags, + int *prime_fd) { struct drm_gem_object *obj; int ret = 0; @@ -506,6 +507,7 @@ out_unlock: return ret; } +EXPORT_SYMBOL(drm_gem_prime_handle_to_fd); int drm_prime_handle_to_fd_ioctl(struct drm_device *dev, void *data, struct drm_file *file_priv) @@ -864,9 +866,9 @@ EXPORT_SYMBOL(drm_prime_get_contiguous_size); * @obj: GEM object to export * @flags: flags like DRM_CLOEXEC and DRM_RDWR * - * This is the implementation of the &drm_gem_object_funcs.export functions - * for GEM drivers using the PRIME helpers. It is used as the default for - * drivers that do not set their own. + * This is the implementation of the &drm_gem_object_funcs.export functions for GEM drivers + * using the PRIME helpers. It is used as the default in + * drm_gem_prime_handle_to_fd(). */ struct dma_buf *drm_gem_prime_export(struct drm_gem_object *obj, int flags) @@ -962,9 +964,10 @@ EXPORT_SYMBOL(drm_gem_prime_import_dev); * @dev: drm_device to import into * @dma_buf: dma-buf object to import * - * This is the implementation of the gem_prime_import functions for GEM - * drivers using the PRIME helpers. It is the default for drivers that do - * not set their own &drm_driver.gem_prime_import. + * This is the implementation of the gem_prime_import functions for GEM drivers + * using the PRIME helpers. Drivers can use this as their + * &drm_driver.gem_prime_import implementation. It is used as the default + * implementation in drm_gem_prime_fd_to_handle(). * * Drivers must arrange to call drm_prime_gem_destroy() from their * &drm_gem_object_funcs.free hook when using this function. diff --git a/include/drm/drm_prime.h b/include/drm/drm_prime.h index a7abf9f3e697..2a1d01e5b56b 100644 --- a/include/drm/drm_prime.h +++ b/include/drm/drm_prime.h @@ -60,12 +60,19 @@ enum dma_data_direction; struct drm_device; struct drm_gem_object; +struct drm_file; /* core prime functions */ struct dma_buf *drm_gem_dmabuf_export(struct drm_device *dev, struct dma_buf_export_info *exp_info); void drm_gem_dmabuf_release(struct dma_buf *dma_buf); +int drm_gem_prime_fd_to_handle(struct drm_device *dev, + struct drm_file *file_priv, int prime_fd, uint32_t *handle); +int drm_gem_prime_handle_to_fd(struct drm_device *dev, + struct drm_file *file_priv, uint32_t handle, uint32_t flags, + int *prime_fd); + /* helper functions for exporting */ int drm_gem_map_attach(struct dma_buf *dma_buf, struct dma_buf_attachment *attach); -- cgit v1.2.3 From 2dcf5fde6dffb312a4bfb8ef940cea2d1f402e32 Mon Sep 17 00:00:00 2001 From: Baokun Li Date: Mon, 27 Nov 2023 14:33:13 +0800 Subject: ext4: prevent the normalized size from exceeding EXT_MAX_BLOCKS For files with logical blocks close to EXT_MAX_BLOCKS, the file size predicted in ext4_mb_normalize_request() may exceed EXT_MAX_BLOCKS. This can cause some blocks to be preallocated that will not be used. And after [Fixes], the following issue may be triggered: ========================================================= kernel BUG at fs/ext4/mballoc.c:4653! Internal error: Oops - BUG: 00000000f2000800 [#1] SMP CPU: 1 PID: 2357 Comm: xfs_io 6.7.0-rc2-00195-g0f5cc96c367f Hardware name: linux,dummy-virt (DT) pc : ext4_mb_use_inode_pa+0x148/0x208 lr : ext4_mb_use_inode_pa+0x98/0x208 Call trace: ext4_mb_use_inode_pa+0x148/0x208 ext4_mb_new_inode_pa+0x240/0x4a8 ext4_mb_use_best_found+0x1d4/0x208 ext4_mb_try_best_found+0xc8/0x110 ext4_mb_regular_allocator+0x11c/0xf48 ext4_mb_new_blocks+0x790/0xaa8 ext4_ext_map_blocks+0x7cc/0xd20 ext4_map_blocks+0x170/0x600 ext4_iomap_begin+0x1c0/0x348 ========================================================= Here is a calculation when adjusting ac_b_ex in ext4_mb_new_inode_pa(): ex.fe_logical = orig_goal_end - EXT4_C2B(sbi, ex.fe_len); if (ac->ac_o_ex.fe_logical >= ex.fe_logical) goto adjust_bex; The problem is that when orig_goal_end is subtracted from ac_b_ex.fe_len it is still greater than EXT_MAX_BLOCKS, which causes ex.fe_logical to overflow to a very small value, which ultimately triggers a BUG_ON in ext4_mb_new_inode_pa() because pa->pa_free < len. The last logical block of an actual write request does not exceed EXT_MAX_BLOCKS, so in ext4_mb_normalize_request() also avoids normalizing the last logical block to exceed EXT_MAX_BLOCKS to avoid the above issue. The test case in [Link] can reproduce the above issue with 64k block size. Link: https://patchwork.kernel.org/project/fstests/list/?series=804003 Cc: # 6.4 Fixes: 93cdf49f6eca ("ext4: Fix best extent lstart adjustment logic in ext4_mb_new_inode_pa()") Signed-off-by: Baokun Li Reviewed-by: Jan Kara Link: https://lore.kernel.org/r/20231127063313.3734294-1-libaokun1@huawei.com Signed-off-by: Theodore Ts'o --- fs/ext4/mballoc.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/fs/ext4/mballoc.c b/fs/ext4/mballoc.c index 454d5612641e..d72b5e3c92ec 100644 --- a/fs/ext4/mballoc.c +++ b/fs/ext4/mballoc.c @@ -4478,6 +4478,10 @@ ext4_mb_normalize_request(struct ext4_allocation_context *ac, start = max(start, rounddown(ac->ac_o_ex.fe_logical, (ext4_lblk_t)EXT4_BLOCKS_PER_GROUP(ac->ac_sb))); + /* avoid unnecessary preallocation that may trigger assertions */ + if (start + size > EXT_MAX_BLOCKS) + size = EXT_MAX_BLOCKS - start; + /* don't cover already allocated blocks in selected range */ if (ar->pleft && start <= ar->lleft) { size -= ar->lleft + 1 - start; -- cgit v1.2.3 From 1fefca6c57fb928d2131ff365270cbf863d89c88 Mon Sep 17 00:00:00 2001 From: Armin Wolf Date: Fri, 24 Nov 2023 19:27:47 +0100 Subject: hwmon: (acpi_power_meter) Fix 4.29 MW bug The ACPI specification says: "If an error occurs while obtaining the meter reading or if the value is not available then an Integer with all bits set is returned" Since the "integer" is 32 bits in case of the ACPI power meter, userspace will get a power reading of 2^32 * 1000 miliwatts (~4.29 MW) in case of such an error. This was discovered due to a lm_sensors bugreport (https://github.com/lm-sensors/lm-sensors/issues/460). Fix this by returning -ENODATA instead. Tested-by: Fixes: de584afa5e18 ("hwmon driver for ACPI 4.0 power meters") Signed-off-by: Armin Wolf Link: https://lore.kernel.org/r/20231124182747.13956-1-W_Armin@gmx.de Signed-off-by: Guenter Roeck --- drivers/hwmon/acpi_power_meter.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/hwmon/acpi_power_meter.c b/drivers/hwmon/acpi_power_meter.c index 8db740214ffd..703666b95bf4 100644 --- a/drivers/hwmon/acpi_power_meter.c +++ b/drivers/hwmon/acpi_power_meter.c @@ -31,6 +31,7 @@ #define POWER_METER_CAN_NOTIFY (1 << 3) #define POWER_METER_IS_BATTERY (1 << 8) #define UNKNOWN_HYSTERESIS 0xFFFFFFFF +#define UNKNOWN_POWER 0xFFFFFFFF #define METER_NOTIFY_CONFIG 0x80 #define METER_NOTIFY_TRIP 0x81 @@ -348,6 +349,9 @@ static ssize_t show_power(struct device *dev, update_meter(resource); mutex_unlock(&resource->lock); + if (resource->power == UNKNOWN_POWER) + return -ENODATA; + return sprintf(buf, "%llu\n", resource->power * 1000); } -- cgit v1.2.3 From 85559227211020b270728104c3b89918f7af27ac Mon Sep 17 00:00:00 2001 From: Zhang Yi Date: Wed, 29 Nov 2023 19:47:39 +0800 Subject: jbd2: correct the printing of write_flags in jbd2_write_superblock() The write_flags print in the trace of jbd2_write_superblock() is not real, so move the modification before the trace. Signed-off-by: Zhang Yi Reviewed-by: Jan Kara Link: https://lore.kernel.org/r/20231129114740.2686201-1-yi.zhang@huaweicloud.com Signed-off-by: Theodore Ts'o --- fs/jbd2/journal.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/fs/jbd2/journal.c b/fs/jbd2/journal.c index ed53188472f9..71b30f6a662d 100644 --- a/fs/jbd2/journal.c +++ b/fs/jbd2/journal.c @@ -1798,9 +1798,11 @@ static int jbd2_write_superblock(journal_t *journal, blk_opf_t write_flags) return -EIO; } - trace_jbd2_write_superblock(journal, write_flags); if (!(journal->j_flags & JBD2_BARRIER)) write_flags &= ~(REQ_FUA | REQ_PREFLUSH); + + trace_jbd2_write_superblock(journal, write_flags); + if (buffer_write_io_error(bh)) { /* * Oh, dear. A previous attempt to write the journal -- cgit v1.2.3 From 6a3afb6ac6dfab158ebdd4b87941178f58c8939f Mon Sep 17 00:00:00 2001 From: Zhang Yi Date: Wed, 29 Nov 2023 19:47:40 +0800 Subject: jbd2: increase the journal IO's priority Current jbd2 only add REQ_SYNC for descriptor block, metadata log buffer, commit buffer and superblock buffer, the submitted IO could be throttled by writeback throttle in block layer, that could lead to priority inversion in some cases. The log IO looks like a kind of high priority metadata IO, so it should not be throttled by WBT like QOS policies in block layer, let's add REQ_SYNC | REQ_IDLE to exempt from writeback throttle, and also add REQ_META together indicates it's a metadata IO. Signed-off-by: Zhang Yi Reviewed-by: Jan Kara Link: https://lore.kernel.org/r/20231129114740.2686201-2-yi.zhang@huaweicloud.com Signed-off-by: Theodore Ts'o --- fs/jbd2/commit.c | 9 +++++---- fs/jbd2/journal.c | 20 +++++++++++--------- include/linux/jbd2.h | 3 +++ 3 files changed, 19 insertions(+), 13 deletions(-) diff --git a/fs/jbd2/commit.c b/fs/jbd2/commit.c index 8d6f934c3d95..9bdb377a348f 100644 --- a/fs/jbd2/commit.c +++ b/fs/jbd2/commit.c @@ -119,7 +119,7 @@ static int journal_submit_commit_record(journal_t *journal, struct commit_header *tmp; struct buffer_head *bh; struct timespec64 now; - blk_opf_t write_flags = REQ_OP_WRITE | REQ_SYNC; + blk_opf_t write_flags = REQ_OP_WRITE | JBD2_JOURNAL_REQ_FLAGS; *cbh = NULL; @@ -395,8 +395,7 @@ void jbd2_journal_commit_transaction(journal_t *journal) */ jbd2_journal_update_sb_log_tail(journal, journal->j_tail_sequence, - journal->j_tail, - REQ_SYNC); + journal->j_tail, 0); mutex_unlock(&journal->j_checkpoint_mutex); } else { jbd2_debug(3, "superblock not updated\n"); @@ -715,6 +714,7 @@ start_journal_io: for (i = 0; i < bufs; i++) { struct buffer_head *bh = wbuf[i]; + /* * Compute checksum. */ @@ -727,7 +727,8 @@ start_journal_io: clear_buffer_dirty(bh); set_buffer_uptodate(bh); bh->b_end_io = journal_end_buffer_io_sync; - submit_bh(REQ_OP_WRITE | REQ_SYNC, bh); + submit_bh(REQ_OP_WRITE | JBD2_JOURNAL_REQ_FLAGS, + bh); } cond_resched(); diff --git a/fs/jbd2/journal.c b/fs/jbd2/journal.c index 71b30f6a662d..206cb53ef2b0 100644 --- a/fs/jbd2/journal.c +++ b/fs/jbd2/journal.c @@ -1100,8 +1100,7 @@ int __jbd2_update_log_tail(journal_t *journal, tid_t tid, unsigned long block) * space and if we lose sb update during power failure we'd replay * old transaction with possibly newly overwritten data. */ - ret = jbd2_journal_update_sb_log_tail(journal, tid, block, - REQ_SYNC | REQ_FUA); + ret = jbd2_journal_update_sb_log_tail(journal, tid, block, REQ_FUA); if (ret) goto out; @@ -1775,8 +1774,7 @@ static int journal_reset(journal_t *journal) */ jbd2_journal_update_sb_log_tail(journal, journal->j_tail_sequence, - journal->j_tail, - REQ_SYNC | REQ_FUA); + journal->j_tail, REQ_FUA); mutex_unlock(&journal->j_checkpoint_mutex); } return jbd2_journal_start_thread(journal); @@ -1798,6 +1796,11 @@ static int jbd2_write_superblock(journal_t *journal, blk_opf_t write_flags) return -EIO; } + /* + * Always set high priority flags to exempt from block layer's + * QOS policies, e.g. writeback throttle. + */ + write_flags |= JBD2_JOURNAL_REQ_FLAGS; if (!(journal->j_flags & JBD2_BARRIER)) write_flags &= ~(REQ_FUA | REQ_PREFLUSH); @@ -2052,7 +2055,7 @@ void jbd2_journal_update_sb_errno(journal_t *journal) jbd2_debug(1, "JBD2: updating superblock error (errno %d)\n", errcode); sb->s_errno = cpu_to_be32(errcode); - jbd2_write_superblock(journal, REQ_SYNC | REQ_FUA); + jbd2_write_superblock(journal, REQ_FUA); } EXPORT_SYMBOL(jbd2_journal_update_sb_errno); @@ -2173,8 +2176,7 @@ int jbd2_journal_destroy(journal_t *journal) ++journal->j_transaction_sequence; write_unlock(&journal->j_state_lock); - jbd2_mark_journal_empty(journal, - REQ_SYNC | REQ_PREFLUSH | REQ_FUA); + jbd2_mark_journal_empty(journal, REQ_PREFLUSH | REQ_FUA); mutex_unlock(&journal->j_checkpoint_mutex); } else err = -EIO; @@ -2475,7 +2477,7 @@ int jbd2_journal_flush(journal_t *journal, unsigned int flags) * the magic code for a fully-recovered superblock. Any future * commits of data to the journal will restore the current * s_start value. */ - jbd2_mark_journal_empty(journal, REQ_SYNC | REQ_FUA); + jbd2_mark_journal_empty(journal, REQ_FUA); if (flags) err = __jbd2_journal_erase(journal, flags); @@ -2521,7 +2523,7 @@ int jbd2_journal_wipe(journal_t *journal, int write) if (write) { /* Lock to make assertions happy... */ mutex_lock_io(&journal->j_checkpoint_mutex); - jbd2_mark_journal_empty(journal, REQ_SYNC | REQ_FUA); + jbd2_mark_journal_empty(journal, REQ_FUA); mutex_unlock(&journal->j_checkpoint_mutex); } diff --git a/include/linux/jbd2.h b/include/linux/jbd2.h index 6dcbb4eb80fb..beb30719ee16 100644 --- a/include/linux/jbd2.h +++ b/include/linux/jbd2.h @@ -1374,6 +1374,9 @@ JBD2_FEATURE_INCOMPAT_FUNCS(csum2, CSUM_V2) JBD2_FEATURE_INCOMPAT_FUNCS(csum3, CSUM_V3) JBD2_FEATURE_INCOMPAT_FUNCS(fast_commit, FAST_COMMIT) +/* Journal high priority write IO operation flags */ +#define JBD2_JOURNAL_REQ_FLAGS (REQ_META | REQ_SYNC | REQ_IDLE) + /* * Journal flag definitions */ -- cgit v1.2.3 From 619f75dae2cf117b1d07f27b046b9ffb071c4685 Mon Sep 17 00:00:00 2001 From: Jan Kara Date: Thu, 30 Nov 2023 10:56:53 +0100 Subject: ext4: fix warning in ext4_dio_write_end_io() The syzbot has reported that it can hit the warning in ext4_dio_write_end_io() because i_size < i_disksize. Indeed the reproducer creates a race between DIO IO completion and truncate expanding the file and thus ext4_dio_write_end_io() sees an inconsistent inode state where i_disksize is already updated but i_size is not updated yet. Since we are careful when setting up DIO write and consider it extending (and thus performing the IO synchronously with i_rwsem held exclusively) whenever it goes past either of i_size or i_disksize, we can use the same test during IO completion without risking entering ext4_handle_inode_extension() without i_rwsem held. This way we make it obvious both i_size and i_disksize are large enough when we report DIO completion without relying on unreliable WARN_ON. Reported-by: Fixes: 91562895f803 ("ext4: properly sync file size update after O_SYNC direct IO") Signed-off-by: Jan Kara Reviewed-by: Ritesh Harjani (IBM) Link: https://lore.kernel.org/r/20231130095653.22679-1-jack@suse.cz Signed-off-by: Theodore Ts'o --- fs/ext4/file.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) diff --git a/fs/ext4/file.c b/fs/ext4/file.c index 0166bb9ca160..6aa15dafc677 100644 --- a/fs/ext4/file.c +++ b/fs/ext4/file.c @@ -349,9 +349,10 @@ static void ext4_inode_extension_cleanup(struct inode *inode, ssize_t count) return; } /* - * If i_disksize got extended due to writeback of delalloc blocks while - * the DIO was running we could fail to cleanup the orphan list in - * ext4_handle_inode_extension(). Do it now. + * If i_disksize got extended either due to writeback of delalloc + * blocks or extending truncate while the DIO was running we could fail + * to cleanup the orphan list in ext4_handle_inode_extension(). Do it + * now. */ if (!list_empty(&EXT4_I(inode)->i_orphan) && inode->i_nlink) { handle_t *handle = ext4_journal_start(inode, EXT4_HT_INODE, 2); @@ -386,10 +387,11 @@ static int ext4_dio_write_end_io(struct kiocb *iocb, ssize_t size, * blocks. But the code in ext4_iomap_alloc() is careful to use * zeroed/unwritten extents if this is possible; thus we won't leave * uninitialized blocks in a file even if we didn't succeed in writing - * as much as we intended. + * as much as we intended. Also we can race with truncate or write + * expanding the file so we have to be a bit careful here. */ - WARN_ON_ONCE(i_size_read(inode) < READ_ONCE(EXT4_I(inode)->i_disksize)); - if (pos + size <= READ_ONCE(EXT4_I(inode)->i_disksize)) + if (pos + size <= READ_ONCE(EXT4_I(inode)->i_disksize) && + pos + size <= i_size_read(inode)) return size; return ext4_handle_inode_extension(inode, pos, size); } -- cgit v1.2.3 From d67f39d2b81b6a8259944d2400c1ff4fe283ff72 Mon Sep 17 00:00:00 2001 From: "wuqiang.matt" Date: Fri, 1 Dec 2023 14:53:55 +0900 Subject: lib: objpool: fix head overrun on RK3588 SBC objpool overrun stress with test_objpool on OrangePi5+ SBC triggered the following kernel warnings: WARNING: CPU: 6 PID: 3115 at lib/objpool.c:168 objpool_push+0xc0/0x100 This message is from objpool.c:168: WARN_ON_ONCE(tail - head > pool->nr_objs); The overrun test case is to validate the case that pre-allocated objects are insufficient: 8 objects are pre-allocated for each node and consumer thread per node tries to grab 16 objects in a row. The testing system is OrangePI 5+, with RK3588, a big.LITTLE SOC with 4x A76 and 4x A55. When disabling either all 4 big or 4 little cores, the overrun tests run well, and once with big and little cores mixed together, the overrun test would always cause an overrun loop. It's likely the memory timing differences of big and little cores cause this trouble. Here are the debugging data of objpool_try_get_slot after try_cmpxchg_release: objpool_pop: cpu: 4/0 0:0 head: 278/279 tail:278 last:276/278 The local copies of 'head' and 'last' were 278 and 276, and reloading of 'slot->head' and 'slot->last' got 279 and 278. After try_cmpxchg_release 'slot->head' became 'head + 1', which is correct. But what's wrong here is the stale value of 'last', and that stale value of 'last' finally led the overrun of 'head'. Memory updating of 'last' and 'head' are performed in push() and pop() independently, which could be the culprit leading this out of order visibility of 'last' and 'head'. So for objpool_try_get_slot(), it's not enough only checking the condition of 'head != slot', the implicit condition 'last - head <= nr_objs' must also be explicitly asserted to guarantee 'last' is always behind 'head' before the object retrieving. This patch will check and try reloading of 'head' and 'last' to ensure 'last' is behind 'head' at the time of object retrieving. Performance testings show the average impact is about 0.1% for X86_64 and 1.12% for ARM64. Here are the results: OS: Debian 10 X86_64, Linux 6.6rc HW: XEON 8336C x 2, 64 cores/128 threads, DDR4 3200MT/s 1T 2T 4T 8T 16T native: 49543304 99277826 199017659 399070324 795185848 objpool: 29909085 59865637 119692073 239750369 478005250 objpool+: 29879313 59230743 119609856 239067773 478509029 32T 48T 64T 96T 128T native: 1596927073 2390099988 2929397330 3183875848 3257546602 objpool: 957553042 1435814086 1680872925 2043126796 2165424198 objpool+: 956476281 1434491297 1666055740 2041556569 2157415622 OS: Debian 11 AARCH64, Linux 6.6rc HW: Kunpeng-920 96 cores/2 sockets/4 NUMA nodes, DDR4 2933 MT/s 1T 2T 4T 8T 16T native: 30890508 60399915 123111980 242257008 494002946 objpool: 14742531 28883047 57739948 115886644 232455421 objpool+: 14107220 29032998 57286084 113730493 232232850 24T 32T 48T 64T 96T native: 746406039 1000174750 1493236240 1998318364 2942911180 objpool: 349164852 467284332 702296756 934459713 1387898285 objpool+: 348388180 462750976 696606096 927865887 1368402195 Link: https://lore.kernel.org/all/20231114115148.298821-1-wuqiang.matt@bytedance.com/ Fixes: b4edb8d2d464 ("lib: objpool added: ring-array based lockless MPMC") Signed-off-by: wuqiang.matt Acked-by: Masami Hiramatsu (Google) Signed-off-by: Masami Hiramatsu (Google) --- lib/objpool.c | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) diff --git a/lib/objpool.c b/lib/objpool.c index ce0087f64400..cfdc02420884 100644 --- a/lib/objpool.c +++ b/lib/objpool.c @@ -201,6 +201,23 @@ static inline void *objpool_try_get_slot(struct objpool_head *pool, int cpu) while (head != READ_ONCE(slot->last)) { void *obj; + /* + * data visibility of 'last' and 'head' could be out of + * order since memory updating of 'last' and 'head' are + * performed in push() and pop() independently + * + * before any retrieving attempts, pop() must guarantee + * 'last' is behind 'head', that is to say, there must + * be available objects in slot, which could be ensured + * by condition 'last != head && last - head <= nr_objs' + * that is equivalent to 'last - head - 1 < nr_objs' as + * 'last' and 'head' are both unsigned int32 + */ + if (READ_ONCE(slot->last) - head - 1 >= pool->nr_objs) { + head = READ_ONCE(slot->head); + continue; + } + /* obj must be retrieved before moving forward head */ obj = READ_ONCE(slot->entries[head & slot->mask]); -- cgit v1.2.3 From d839a656d0f3caca9f96e9bf912fd394ac6a11bc Mon Sep 17 00:00:00 2001 From: JP Kobryn Date: Fri, 1 Dec 2023 14:53:55 +0900 Subject: kprobes: consistent rcu api usage for kretprobe holder It seems that the pointer-to-kretprobe "rp" within the kretprobe_holder is RCU-managed, based on the (non-rethook) implementation of get_kretprobe(). The thought behind this patch is to make use of the RCU API where possible when accessing this pointer so that the needed barriers are always in place and to self-document the code. The __rcu annotation to "rp" allows for sparse RCU checking. Plain writes done to the "rp" pointer are changed to make use of the RCU macro for assignment. For the single read, the implementation of get_kretprobe() is simplified by making use of an RCU macro which accomplishes the same, but note that the log warning text will be more generic. I did find that there is a difference in assembly generated between the usage of the RCU macros vs without. For example, on arm64, when using rcu_assign_pointer(), the corresponding store instruction is a store-release (STLR) which has an implicit barrier. When normal assignment is done, a regular store (STR) is found. In the macro case, this seems to be a result of rcu_assign_pointer() using smp_store_release() when the value to write is not NULL. Link: https://lore.kernel.org/all/20231122132058.3359-1-inwardvessel@gmail.com/ Fixes: d741bf41d7c7 ("kprobes: Remove kretprobe hash") Cc: stable@vger.kernel.org Signed-off-by: JP Kobryn Acked-by: Masami Hiramatsu (Google) Signed-off-by: Masami Hiramatsu (Google) --- include/linux/kprobes.h | 7 ++----- kernel/kprobes.c | 4 ++-- 2 files changed, 4 insertions(+), 7 deletions(-) diff --git a/include/linux/kprobes.h b/include/linux/kprobes.h index ab1da3142b06..64672bace560 100644 --- a/include/linux/kprobes.h +++ b/include/linux/kprobes.h @@ -139,7 +139,7 @@ static inline bool kprobe_ftrace(struct kprobe *p) * */ struct kretprobe_holder { - struct kretprobe *rp; + struct kretprobe __rcu *rp; struct objpool_head pool; }; @@ -245,10 +245,7 @@ unsigned long kretprobe_trampoline_handler(struct pt_regs *regs, static nokprobe_inline struct kretprobe *get_kretprobe(struct kretprobe_instance *ri) { - RCU_LOCKDEP_WARN(!rcu_read_lock_any_held(), - "Kretprobe is accessed from instance under preemptive context"); - - return READ_ONCE(ri->rph->rp); + return rcu_dereference_check(ri->rph->rp, rcu_read_lock_any_held()); } static nokprobe_inline unsigned long get_kretprobe_retaddr(struct kretprobe_instance *ri) diff --git a/kernel/kprobes.c b/kernel/kprobes.c index 075a632e6c7c..d5a0ee40bf66 100644 --- a/kernel/kprobes.c +++ b/kernel/kprobes.c @@ -2252,7 +2252,7 @@ int register_kretprobe(struct kretprobe *rp) rp->rph = NULL; return -ENOMEM; } - rp->rph->rp = rp; + rcu_assign_pointer(rp->rph->rp, rp); rp->nmissed = 0; /* Establish function entry probe point */ ret = register_kprobe(&rp->kp); @@ -2300,7 +2300,7 @@ void unregister_kretprobes(struct kretprobe **rps, int num) #ifdef CONFIG_KRETPROBE_ON_RETHOOK rethook_free(rps[i]->rh); #else - rps[i]->rph->rp = NULL; + rcu_assign_pointer(rps[i]->rph->rp, NULL); #endif } mutex_unlock(&kprobe_mutex); -- cgit v1.2.3 From a1461f1fd6cfdc4b8917c9d4a91e92605d1f28dc Mon Sep 17 00:00:00 2001 From: "Masami Hiramatsu (Google)" Date: Fri, 1 Dec 2023 14:53:56 +0900 Subject: rethook: Use __rcu pointer for rethook::handler Since the rethook::handler is an RCU-maganged pointer so that it will notice readers the rethook is stopped (unregistered) or not, it should be an __rcu pointer and use appropriate functions to be accessed. This will use appropriate memory barrier when accessing it. OTOH, rethook::data is never changed, so we don't need to check it in get_kretprobe(). NOTE: To avoid sparse warning, rethook::handler is defined by a raw function pointer type with __rcu instead of rethook_handler_t. Link: https://lore.kernel.org/all/170126066201.398836.837498688669005979.stgit@devnote2/ Fixes: 54ecbe6f1ed5 ("rethook: Add a generic return hook") Cc: stable@vger.kernel.org Reported-by: kernel test robot Closes: https://lore.kernel.org/oe-kbuild-all/202311241808.rv9ceuAh-lkp@intel.com/ Tested-by: JP Kobryn Signed-off-by: Masami Hiramatsu (Google) --- include/linux/kprobes.h | 6 ++---- include/linux/rethook.h | 7 ++++++- kernel/trace/rethook.c | 23 ++++++++++++++--------- 3 files changed, 22 insertions(+), 14 deletions(-) diff --git a/include/linux/kprobes.h b/include/linux/kprobes.h index 64672bace560..0ff44d6633e3 100644 --- a/include/linux/kprobes.h +++ b/include/linux/kprobes.h @@ -197,10 +197,8 @@ extern int arch_trampoline_kprobe(struct kprobe *p); #ifdef CONFIG_KRETPROBE_ON_RETHOOK static nokprobe_inline struct kretprobe *get_kretprobe(struct kretprobe_instance *ri) { - RCU_LOCKDEP_WARN(!rcu_read_lock_any_held(), - "Kretprobe is accessed from instance under preemptive context"); - - return (struct kretprobe *)READ_ONCE(ri->node.rethook->data); + /* rethook::data is non-changed field, so that you can access it freely. */ + return (struct kretprobe *)ri->node.rethook->data; } static nokprobe_inline unsigned long get_kretprobe_retaddr(struct kretprobe_instance *ri) { diff --git a/include/linux/rethook.h b/include/linux/rethook.h index ce69b2b7bc35..ba60962805f6 100644 --- a/include/linux/rethook.h +++ b/include/linux/rethook.h @@ -28,7 +28,12 @@ typedef void (*rethook_handler_t) (struct rethook_node *, void *, unsigned long, */ struct rethook { void *data; - rethook_handler_t handler; + /* + * To avoid sparse warnings, this uses a raw function pointer with + * __rcu, instead of rethook_handler_t. But this must be same as + * rethook_handler_t. + */ + void (__rcu *handler) (struct rethook_node *, void *, unsigned long, struct pt_regs *); struct objpool_head pool; struct rcu_head rcu; }; diff --git a/kernel/trace/rethook.c b/kernel/trace/rethook.c index 6fd7d4ecbbc6..fa03094e9e69 100644 --- a/kernel/trace/rethook.c +++ b/kernel/trace/rethook.c @@ -48,7 +48,7 @@ static void rethook_free_rcu(struct rcu_head *head) */ void rethook_stop(struct rethook *rh) { - WRITE_ONCE(rh->handler, NULL); + rcu_assign_pointer(rh->handler, NULL); } /** @@ -63,7 +63,7 @@ void rethook_stop(struct rethook *rh) */ void rethook_free(struct rethook *rh) { - WRITE_ONCE(rh->handler, NULL); + rethook_stop(rh); call_rcu(&rh->rcu, rethook_free_rcu); } @@ -82,6 +82,12 @@ static int rethook_fini_pool(struct objpool_head *head, void *context) return 0; } +static inline rethook_handler_t rethook_get_handler(struct rethook *rh) +{ + return (rethook_handler_t)rcu_dereference_check(rh->handler, + rcu_read_lock_any_held()); +} + /** * rethook_alloc() - Allocate struct rethook. * @data: a data to pass the @handler when hooking the return. @@ -107,7 +113,7 @@ struct rethook *rethook_alloc(void *data, rethook_handler_t handler, return ERR_PTR(-ENOMEM); rh->data = data; - rh->handler = handler; + rcu_assign_pointer(rh->handler, handler); /* initialize the objpool for rethook nodes */ if (objpool_init(&rh->pool, num, size, GFP_KERNEL, rh, @@ -135,9 +141,10 @@ static void free_rethook_node_rcu(struct rcu_head *head) */ void rethook_recycle(struct rethook_node *node) { - lockdep_assert_preemption_disabled(); + rethook_handler_t handler; - if (likely(READ_ONCE(node->rethook->handler))) + handler = rethook_get_handler(node->rethook); + if (likely(handler)) objpool_push(node, &node->rethook->pool); else call_rcu(&node->rcu, free_rethook_node_rcu); @@ -153,9 +160,7 @@ NOKPROBE_SYMBOL(rethook_recycle); */ struct rethook_node *rethook_try_get(struct rethook *rh) { - rethook_handler_t handler = READ_ONCE(rh->handler); - - lockdep_assert_preemption_disabled(); + rethook_handler_t handler = rethook_get_handler(rh); /* Check whether @rh is going to be freed. */ if (unlikely(!handler)) @@ -300,7 +305,7 @@ unsigned long rethook_trampoline_handler(struct pt_regs *regs, rhn = container_of(first, struct rethook_node, llist); if (WARN_ON_ONCE(rhn->frame != frame)) break; - handler = READ_ONCE(rhn->rethook->handler); + handler = rethook_get_handler(rhn->rethook); if (handler) handler(rhn, rhn->rethook->data, correct_ret_addr, regs); -- cgit v1.2.3 From 75475bb51e78a3f54ad2f69380f2a1c985e85f2d Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Wed, 29 Nov 2023 16:06:30 +0000 Subject: ipv6: fix potential NULL deref in fib6_add() If fib6_find_prefix() returns NULL, we should silently fallback using fib6_null_entry regardless of RT6_DEBUG value. syzbot reported: WARNING: CPU: 0 PID: 5477 at net/ipv6/ip6_fib.c:1516 fib6_add+0x310d/0x3fa0 net/ipv6/ip6_fib.c:1516 Modules linked in: CPU: 0 PID: 5477 Comm: syz-executor.0 Not tainted 6.7.0-rc2-syzkaller-00029-g9b6de136b5f0 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/10/2023 RIP: 0010:fib6_add+0x310d/0x3fa0 net/ipv6/ip6_fib.c:1516 Code: 00 48 8b 54 24 68 e8 42 22 00 00 48 85 c0 74 14 49 89 c6 e8 d5 d3 c2 f7 eb 5d e8 ce d3 c2 f7 e9 ca 00 00 00 e8 c4 d3 c2 f7 90 <0f> 0b 90 48 b8 00 00 00 00 00 fc ff df 48 8b 4c 24 38 80 3c 01 00 RSP: 0018:ffffc90005067740 EFLAGS: 00010293 RAX: ffffffff89cba5bc RBX: ffffc90005067ab0 RCX: ffff88801a2e9dc0 RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000000 RBP: ffffc90005067980 R08: ffffffff89cbca85 R09: 1ffff110040d4b85 R10: dffffc0000000000 R11: ffffed10040d4b86 R12: 00000000ffffffff R13: 1ffff110051c3904 R14: ffff8880206a5c00 R15: ffff888028e1c820 FS: 00007f763783c6c0(0000) GS:ffff8880b9800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f763783bff8 CR3: 000000007f74d000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: __ip6_ins_rt net/ipv6/route.c:1303 [inline] ip6_route_add+0x88/0x120 net/ipv6/route.c:3847 ipv6_route_ioctl+0x525/0x7b0 net/ipv6/route.c:4467 inet6_ioctl+0x21a/0x270 net/ipv6/af_inet6.c:575 sock_do_ioctl+0x152/0x460 net/socket.c:1220 sock_ioctl+0x615/0x8c0 net/socket.c:1339 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:871 [inline] __se_sys_ioctl+0xf8/0x170 fs/ioctl.c:857 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x45/0x110 arch/x86/entry/common.c:82 Fixes: 7bbfe00e0252 ("ipv6: fix general protection fault in fib6_add()") Reported-by: syzbot Signed-off-by: Eric Dumazet Cc: Wei Wang Reviewed-by: David Ahern Link: https://lore.kernel.org/r/20231129160630.3509216-1-edumazet@google.com Signed-off-by: Jakub Kicinski --- net/ipv6/ip6_fib.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) diff --git a/net/ipv6/ip6_fib.c b/net/ipv6/ip6_fib.c index 28b01a068412..7772f42ff2b9 100644 --- a/net/ipv6/ip6_fib.c +++ b/net/ipv6/ip6_fib.c @@ -1511,13 +1511,9 @@ out: if (!pn_leaf && !(pn->fn_flags & RTN_RTINFO)) { pn_leaf = fib6_find_prefix(info->nl_net, table, pn); -#if RT6_DEBUG >= 2 - if (!pn_leaf) { - WARN_ON(!pn_leaf); + if (!pn_leaf) pn_leaf = info->nl_net->ipv6.fib6_null_entry; - } -#endif fib6_info_hold(pn_leaf); rcu_assign_pointer(pn->leaf, pn_leaf); } -- cgit v1.2.3 From 96d7e79401364c6e9a63af5f74f76792b03cb832 Mon Sep 17 00:00:00 2001 From: Ville Syrjälä Date: Tue, 21 Nov 2023 07:43:14 +0200 Subject: drm/i915: Check pipe active state in {planes,vrr}_{enabling,disabling}() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit {planes,vrr}_{enabling,disabling}() are supposed to indicate whether the specific hardware feature is supposed to be enabling or disabling. That can only makes sense if the pipe is active overall. So check for that before we go poking at the hardware. I think we're semi-safe currently on due to: - intel_pre_plane_update() doesn't get called when the pipe was not-active prior to the commit, but this is actually a bug. This saves vrr_disabling(), and vrr_enabling() is called from deeper down where we have already checked hw.active. - active_planes mirrors the crtc's hw.active Reviewed-by: Jani Nikula Signed-off-by: Ville Syrjälä Link: https://patchwork.freedesktop.org/patch/msgid/20231121054324.9988-2-ville.syrjala@linux.intel.com (cherry picked from commit bc53c4d56eb24dbe56cd2c66ef4e9fc9393b1533) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/display/intel_display.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c index a2a806262c9e..94330108145e 100644 --- a/drivers/gpu/drm/i915/display/intel_display.c +++ b/drivers/gpu/drm/i915/display/intel_display.c @@ -906,12 +906,18 @@ static bool needs_async_flip_vtd_wa(const struct intel_crtc_state *crtc_state) static bool planes_enabling(const struct intel_crtc_state *old_crtc_state, const struct intel_crtc_state *new_crtc_state) { + if (!new_crtc_state->hw.active) + return false; + return is_enabling(active_planes, old_crtc_state, new_crtc_state); } static bool planes_disabling(const struct intel_crtc_state *old_crtc_state, const struct intel_crtc_state *new_crtc_state) { + if (!old_crtc_state->hw.active) + return false; + return is_disabling(active_planes, old_crtc_state, new_crtc_state); } @@ -928,6 +934,9 @@ static bool vrr_params_changed(const struct intel_crtc_state *old_crtc_state, static bool vrr_enabling(const struct intel_crtc_state *old_crtc_state, const struct intel_crtc_state *new_crtc_state) { + if (!new_crtc_state->hw.active) + return false; + return is_enabling(vrr.enable, old_crtc_state, new_crtc_state) || (new_crtc_state->vrr.enable && (new_crtc_state->update_m_n || new_crtc_state->update_lrr || @@ -937,6 +946,9 @@ static bool vrr_enabling(const struct intel_crtc_state *old_crtc_state, static bool vrr_disabling(const struct intel_crtc_state *old_crtc_state, const struct intel_crtc_state *new_crtc_state) { + if (!old_crtc_state->hw.active) + return false; + return is_disabling(vrr.enable, old_crtc_state, new_crtc_state) || (old_crtc_state->vrr.enable && (new_crtc_state->update_m_n || new_crtc_state->update_lrr || -- cgit v1.2.3 From c2183b3dcc9dd41b768569ea88bededa58cceebb Mon Sep 17 00:00:00 2001 From: Daniel Mentz Date: Tue, 7 Nov 2023 22:22:26 -0800 Subject: iommu: Fix printk arg in of_iommu_get_resv_regions() The variable phys is defined as (struct resource *) which aligns with the printk format specifier %pr. Taking the address of it results in a value of type (struct resource **) which is incompatible with the format specifier %pr. Therefore, remove the address of operator (&). Fixes: a5bf3cfce8cb ("iommu: Implement of_iommu_get_resv_regions()") Signed-off-by: Daniel Mentz Acked-by: Thierry Reding Link: https://lore.kernel.org/r/20231108062226.928985-1-danielmentz@google.com Signed-off-by: Joerg Roedel --- drivers/iommu/of_iommu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/iommu/of_iommu.c b/drivers/iommu/of_iommu.c index c25b4ae6aeee..35ba090f3b5e 100644 --- a/drivers/iommu/of_iommu.c +++ b/drivers/iommu/of_iommu.c @@ -197,7 +197,7 @@ iommu_resv_region_get_type(struct device *dev, if (start == phys->start && end == phys->end) return IOMMU_RESV_DIRECT; - dev_warn(dev, "treating non-direct mapping [%pr] -> [%pap-%pap] as reservation\n", &phys, + dev_warn(dev, "treating non-direct mapping [%pr] -> [%pap-%pap] as reservation\n", phys, &start, &end); return IOMMU_RESV_RESERVED; } -- cgit v1.2.3 From 95dd1e34ff5bbee93a28ff3947eceaf6de811b1a Mon Sep 17 00:00:00 2001 From: Boerge Struempfel Date: Wed, 29 Nov 2023 16:23:07 +0100 Subject: gpiolib: sysfs: Fix error handling on failed export If gpio_set_transitory() fails, we should free the GPIO again. Most notably, the flag FLAG_REQUESTED has previously been set in gpiod_request_commit(), and should be reset on failure. To my knowledge, this does not affect any current users, since the gpio_set_transitory() mainly returns 0 and -ENOTSUPP, which is converted to 0. However the gpio_set_transitory() function calles the .set_config() function of the corresponding GPIO chip and there are some GPIO drivers in which some (unlikely) branches return other values like -EPROBE_DEFER, and -EINVAL. In these cases, the above mentioned FLAG_REQUESTED would not be reset, which results in the pin being blocked until the next reboot. Fixes: e10f72bf4b3e ("gpio: gpiolib: Generalise state persistence beyond sleep") Signed-off-by: Boerge Struempfel Reviewed-by: Andy Shevchenko Signed-off-by: Bartosz Golaszewski --- drivers/gpio/gpiolib-sysfs.c | 15 +++++++++------ 1 file changed, 9 insertions(+), 6 deletions(-) diff --git a/drivers/gpio/gpiolib-sysfs.c b/drivers/gpio/gpiolib-sysfs.c index 6f309a3b2d9a..12d853845bb8 100644 --- a/drivers/gpio/gpiolib-sysfs.c +++ b/drivers/gpio/gpiolib-sysfs.c @@ -474,14 +474,17 @@ static ssize_t export_store(const struct class *class, goto done; status = gpiod_set_transitory(desc, false); - if (!status) { - status = gpiod_export(desc, true); - if (status < 0) - gpiod_free(desc); - else - set_bit(FLAG_SYSFS, &desc->flags); + if (status) { + gpiod_free(desc); + goto done; } + status = gpiod_export(desc, true); + if (status < 0) + gpiod_free(desc); + else + set_bit(FLAG_SYSFS, &desc->flags); + done: if (status) pr_debug("%s: status %d\n", __func__, status); -- cgit v1.2.3 From cf50b5cae84741268c7bd3fed568c1b8beef9fa9 Mon Sep 17 00:00:00 2001 From: Jakub Kicinski Date: Tue, 28 Nov 2023 06:59:15 -0800 Subject: MAINTAINERS: exclude 9p from networking We don't have much to say about 9p, even tho it lives under net/. Avoid CCing netdev. Signed-off-by: Jakub Kicinski Reviewed-by: Simon Horman Signed-off-by: David S. Miller --- MAINTAINERS | 1 + 1 file changed, 1 insertion(+) diff --git a/MAINTAINERS b/MAINTAINERS index 012df8ccf34e..e6109201e8b4 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -15068,6 +15068,7 @@ F: lib/random32.c F: net/ F: tools/net/ F: tools/testing/selftests/net/ +X: net/9p/ X: net/bluetooth/ NETWORKING [IPSEC] -- cgit v1.2.3 From 9572c949385aa2ef10368287c439bcb7935137c8 Mon Sep 17 00:00:00 2001 From: Subbaraya Sundeep Date: Wed, 29 Nov 2023 10:53:42 +0530 Subject: octeontx2-pf: Add missing mutex lock in otx2_get_pauseparam All the mailbox messages sent to AF needs to be guarded by mutex lock. Add the missing lock in otx2_get_pauseparam function. Fixes: 75f36270990c ("octeontx2-pf: Support to enable/disable pause frames via ethtool") Signed-off-by: Subbaraya Sundeep Reviewed-by: Simon Horman Signed-off-by: David S. Miller --- drivers/net/ethernet/marvell/octeontx2/nic/otx2_ethtool.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_ethtool.c b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_ethtool.c index 9efcec549834..53f6258a973c 100644 --- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_ethtool.c +++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_ethtool.c @@ -334,9 +334,12 @@ static void otx2_get_pauseparam(struct net_device *netdev, if (is_otx2_lbkvf(pfvf->pdev)) return; + mutex_lock(&pfvf->mbox.lock); req = otx2_mbox_alloc_msg_cgx_cfg_pause_frm(&pfvf->mbox); - if (!req) + if (!req) { + mutex_unlock(&pfvf->mbox.lock); return; + } if (!otx2_sync_mbox_msg(&pfvf->mbox)) { rsp = (struct cgx_pause_frm_cfg *) @@ -344,6 +347,7 @@ static void otx2_get_pauseparam(struct net_device *netdev, pause->rx_pause = rsp->rx_pause; pause->tx_pause = rsp->tx_pause; } + mutex_unlock(&pfvf->mbox.lock); } static int otx2_set_pauseparam(struct net_device *netdev, -- cgit v1.2.3 From 830139e7b6911266a84a77e1f18abf758995cc89 Mon Sep 17 00:00:00 2001 From: Subbaraya Sundeep Date: Wed, 29 Nov 2023 11:11:48 +0530 Subject: octeontx2-af: Check return value of nix_get_nixlf before using nixlf If a NIXLF is not attached to a PF/VF device then nix_get_nixlf function fails and returns proper error code. But npc_get_default_entry_action does not check it and uses garbage value in subsequent calls. Fix this by cheking the return value of nix_get_nixlf. Fixes: 967db3529eca ("octeontx2-af: add support for multicast/promisc packet replication feature") Signed-off-by: Subbaraya Sundeep Signed-off-by: David S. Miller --- drivers/net/ethernet/marvell/octeontx2/af/rvu_npc.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc.c b/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc.c index 16cfc802e348..f65805860c8d 100644 --- a/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc.c +++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc.c @@ -389,7 +389,13 @@ static u64 npc_get_default_entry_action(struct rvu *rvu, struct npc_mcam *mcam, int bank, nixlf, index; /* get ucast entry rule entry index */ - nix_get_nixlf(rvu, pf_func, &nixlf, NULL); + if (nix_get_nixlf(rvu, pf_func, &nixlf, NULL)) { + dev_err(rvu->dev, "%s: nixlf not attached to pcifunc:0x%x\n", + __func__, pf_func); + /* Action 0 is drop */ + return 0; + } + index = npc_get_nixlf_mcam_index(mcam, pf_func, nixlf, NIXLF_UCAST_ENTRY); bank = npc_get_bank(mcam, index); -- cgit v1.2.3 From 19650c0f402f53abe48a55a1c49c8ed9576a088c Mon Sep 17 00:00:00 2001 From: Jeremy Soller Date: Mon, 27 Nov 2023 11:42:38 -0700 Subject: ASoC: amd: yc: Add DMI entry to support System76 Pangolin 13 Add pang13 quirk to enable the internal microphone. Signed-off-by: Jeremy Soller Signed-off-by: Tim Crawford Link: https://lore.kernel.org/r/20231127184237.32077-2-tcrawford@system76.com Signed-off-by: Mark Brown --- sound/soc/amd/yc/acp6x-mach.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/sound/soc/amd/yc/acp6x-mach.c b/sound/soc/amd/yc/acp6x-mach.c index e2a510443bf1..c425652b0fad 100644 --- a/sound/soc/amd/yc/acp6x-mach.c +++ b/sound/soc/amd/yc/acp6x-mach.c @@ -388,6 +388,13 @@ static const struct dmi_system_id yc_acp_quirk_table[] = { DMI_MATCH(DMI_PRODUCT_VERSION, "pang12"), } }, + { + .driver_data = &acp6x_card, + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "System76"), + DMI_MATCH(DMI_PRODUCT_VERSION, "pang13"), + } + }, {} }; -- cgit v1.2.3 From b24e3590c94ab0aba6e455996b502a83baa5c31c Mon Sep 17 00:00:00 2001 From: Malcolm Hart Date: Mon, 27 Nov 2023 20:36:00 +0000 Subject: ASoC: amd: yc: Fix non-functional mic on ASUS E1504FA This patch adds ASUSTeK COMPUTER INC "E1504FA" to the quirks file acp6x-mach.c to enable microphone array on ASUS Vivobook GO 15. I have this laptop and can confirm that the patch succeeds in enabling the microphone array. Signed-off-by: Malcolm Hart Cc: stable@vger.kernel.org Rule: add Link: https://lore.kernel.org/stable/875y1nt1bx.fsf%405harts.com Link: https://lore.kernel.org/r/871qcbszh0.fsf@5harts.com Signed-off-by: Mark Brown --- sound/soc/amd/yc/acp6x-mach.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/sound/soc/amd/yc/acp6x-mach.c b/sound/soc/amd/yc/acp6x-mach.c index c425652b0fad..d83cb6e4c62a 100644 --- a/sound/soc/amd/yc/acp6x-mach.c +++ b/sound/soc/amd/yc/acp6x-mach.c @@ -283,6 +283,13 @@ static const struct dmi_system_id yc_acp_quirk_table[] = { DMI_MATCH(DMI_PRODUCT_NAME, "M6500RC"), } }, + { + .driver_data = &acp6x_card, + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK COMPUTER INC."), + DMI_MATCH(DMI_PRODUCT_NAME, "E1504FA"), + } + }, { .driver_data = &acp6x_card, .matches = { -- cgit v1.2.3 From a2f35ed1d237c459100adb0c39bb811d7f170977 Mon Sep 17 00:00:00 2001 From: Neil Armstrong Date: Thu, 16 Nov 2023 17:44:21 +0100 Subject: ASoC: codecs: lpass-tx-macro: set active_decimator correct default value The -1 value for active_decimator[dai_id] is considered as "not set", but at probe the table is initialized a 0, this prevents enabling the DEC0 Mixer since it will be considered as already set. Initialize the table entries as -1 to fix tx_macro_tx_mixer_put(). Fixes: 1c6a7f5250ce ("ASoC: codecs: tx-macro: fix active_decimator array") Fixes: c1057a08af43 ("ASoC: codecs: tx-macro: fix kcontrol put") Signed-off-by: Neil Armstrong Link: https://lore.kernel.org/r/20231116-topic-sm8x50-upstream-tx-macro-fix-active-decimator-set-v1-1-6edf402f4b6f@linaro.org Signed-off-by: Mark Brown --- sound/soc/codecs/lpass-tx-macro.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/sound/soc/codecs/lpass-tx-macro.c b/sound/soc/codecs/lpass-tx-macro.c index 82f9873ffada..124c2e144f33 100644 --- a/sound/soc/codecs/lpass-tx-macro.c +++ b/sound/soc/codecs/lpass-tx-macro.c @@ -2021,6 +2021,11 @@ static int tx_macro_probe(struct platform_device *pdev) tx->dev = dev; + /* Set active_decimator default value */ + tx->active_decimator[TX_MACRO_AIF1_CAP] = -1; + tx->active_decimator[TX_MACRO_AIF2_CAP] = -1; + tx->active_decimator[TX_MACRO_AIF3_CAP] = -1; + /* set MCLK and NPL rates */ clk_set_rate(tx->mclk, MCLK_FREQ); clk_set_rate(tx->npl, MCLK_FREQ); -- cgit v1.2.3 From a0575b4add21a243cc3257e75ad913cd5377d5f2 Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Tue, 28 Nov 2023 14:39:14 +0200 Subject: ASoC: hdac_hda: Conditionally register dais for HDMI and Analog The current driver is registering the same dais for each hdev found in the system which results duplicated widgets to be registered and the kernel log contains similar prints: snd_hda_codec_realtek ehdaudio0D0: ASoC: sink widget AIF1TX overwritten snd_hda_codec_realtek ehdaudio0D0: ASoC: source widget AIF1RX overwritten skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: sink widget hifi3 overwritten skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: sink widget hifi2 overwritten skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: sink widget hifi1 overwritten skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: source widget Codec Output Pin1 overwritten skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: sink widget Codec Input Pin1 overwritten skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: sink widget Analog Codec Playback overwritten skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: sink widget Digital Codec Playback overwritten skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: sink widget Alt Analog Codec Playback overwritten skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: source widget Analog Codec Capture overwritten skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: source widget Digital Codec Capture overwritten skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: source widget Alt Analog Codec Capture overwritten To avoid such issue, split the dai array into HDMI and non HDMI array and register them conditionally: for HDMI hdev only register the dais needed for HDMI for non HDMI hdev do not register the HDMI dais. Depends-on: 3d1dc8b1030d ("ASoC: Intel: skl_hda_dsp_generic: Drop HDMI routes when HDMI is not available") Link: https://github.com/thesofproject/linux/issues/4509 Signed-off-by: Peter Ujfalusi Reviewed-by: Kai Vehmanen Link: https://lore.kernel.org/r/20231128123914.3986-1-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown --- sound/soc/codecs/hdac_hda.c | 23 ++++++++++++++++++++--- 1 file changed, 20 insertions(+), 3 deletions(-) diff --git a/sound/soc/codecs/hdac_hda.c b/sound/soc/codecs/hdac_hda.c index 355f30779a34..b075689db2dc 100644 --- a/sound/soc/codecs/hdac_hda.c +++ b/sound/soc/codecs/hdac_hda.c @@ -132,6 +132,9 @@ static struct snd_soc_dai_driver hdac_hda_dais[] = { .sig_bits = 24, }, }, +}; + +static struct snd_soc_dai_driver hdac_hda_hdmi_dais[] = { { .id = HDAC_HDMI_0_DAI_ID, .name = "intel-hdmi-hifi1", @@ -607,8 +610,16 @@ static const struct snd_soc_component_driver hdac_hda_codec = { .endianness = 1, }; +static const struct snd_soc_component_driver hdac_hda_hdmi_codec = { + .probe = hdac_hda_codec_probe, + .remove = hdac_hda_codec_remove, + .idle_bias_on = false, + .endianness = 1, +}; + static int hdac_hda_dev_probe(struct hdac_device *hdev) { + struct hdac_hda_priv *hda_pvt = dev_get_drvdata(&hdev->dev); struct hdac_ext_link *hlink; int ret; @@ -621,9 +632,15 @@ static int hdac_hda_dev_probe(struct hdac_device *hdev) snd_hdac_ext_bus_link_get(hdev->bus, hlink); /* ASoC specific initialization */ - ret = devm_snd_soc_register_component(&hdev->dev, - &hdac_hda_codec, hdac_hda_dais, - ARRAY_SIZE(hdac_hda_dais)); + if (hda_pvt->need_display_power) + ret = devm_snd_soc_register_component(&hdev->dev, + &hdac_hda_hdmi_codec, hdac_hda_hdmi_dais, + ARRAY_SIZE(hdac_hda_hdmi_dais)); + else + ret = devm_snd_soc_register_component(&hdev->dev, + &hdac_hda_codec, hdac_hda_dais, + ARRAY_SIZE(hdac_hda_dais)); + if (ret < 0) { dev_err(&hdev->dev, "failed to register HDA codec %d\n", ret); return ret; -- cgit v1.2.3 From c447636970e3409ac39f0bb8c2dcff6b726f36b0 Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Wed, 29 Nov 2023 15:14:10 +0200 Subject: ASoC: SOF: ipc4-topology: Correct data structures for the SRC module Separate the IPC message part as struct sof_ipc4_src_data. This struct describes the message payload passed to the firmware via the mailbox. It is not wise to be 'clever' and try to use the first part of a struct as IPC message without marking the message section as packed and aligned. Signed-off-by: Peter Ujfalusi Reviewed-by: Pierre-Louis Bossart Reviewed-by: Bard Liao Reviewed-by: Ranjani Sridharan Link: https://lore.kernel.org/r/20231129131411.27516-2-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown --- sound/soc/sof/ipc4-topology.c | 21 +++++++++++---------- sound/soc/sof/ipc4-topology.h | 16 ++++++++++++---- 2 files changed, 23 insertions(+), 14 deletions(-) diff --git a/sound/soc/sof/ipc4-topology.c b/sound/soc/sof/ipc4-topology.c index 19f36db30979..fae415b9235d 100644 --- a/sound/soc/sof/ipc4-topology.c +++ b/sound/soc/sof/ipc4-topology.c @@ -141,7 +141,7 @@ static const struct sof_topology_token gain_tokens[] = { /* SRC */ static const struct sof_topology_token src_tokens[] = { {SOF_TKN_SRC_RATE_OUT, SND_SOC_TPLG_TUPLE_TYPE_WORD, get_token_u32, - offsetof(struct sof_ipc4_src, sink_rate)}, + offsetof(struct sof_ipc4_src_data, sink_rate)}, }; static const struct sof_token_info ipc4_token_list[SOF_TOKEN_COUNT] = { @@ -811,11 +811,12 @@ static int sof_ipc4_widget_setup_comp_src(struct snd_sof_widget *swidget) swidget->private = src; - ret = sof_ipc4_get_audio_fmt(scomp, swidget, &src->available_fmt, &src->base_config); + ret = sof_ipc4_get_audio_fmt(scomp, swidget, &src->available_fmt, + &src->data.base_config); if (ret) goto err; - ret = sof_update_ipc_object(scomp, src, SOF_SRC_TOKENS, swidget->tuples, + ret = sof_update_ipc_object(scomp, &src->data, SOF_SRC_TOKENS, swidget->tuples, swidget->num_tuples, sizeof(*src), 1); if (ret) { dev_err(scomp->dev, "Parsing SRC tokens failed\n"); @@ -824,7 +825,7 @@ static int sof_ipc4_widget_setup_comp_src(struct snd_sof_widget *swidget) spipe->core_mask |= BIT(swidget->core); - dev_dbg(scomp->dev, "SRC sink rate %d\n", src->sink_rate); + dev_dbg(scomp->dev, "SRC sink rate %d\n", src->data.sink_rate); ret = sof_ipc4_widget_setup_msg(swidget, &src->msg); if (ret) @@ -1900,7 +1901,7 @@ static int sof_ipc4_prepare_src_module(struct snd_sof_widget *swidget, u32 out_ref_rate, out_ref_channels, out_ref_valid_bits; int output_format_index, input_format_index; - input_format_index = sof_ipc4_init_input_audio_fmt(sdev, swidget, &src->base_config, + input_format_index = sof_ipc4_init_input_audio_fmt(sdev, swidget, &src->data.base_config, pipeline_params, available_fmt); if (input_format_index < 0) return input_format_index; @@ -1930,7 +1931,7 @@ static int sof_ipc4_prepare_src_module(struct snd_sof_widget *swidget, */ out_ref_rate = params_rate(fe_params); - output_format_index = sof_ipc4_init_output_audio_fmt(sdev, &src->base_config, + output_format_index = sof_ipc4_init_output_audio_fmt(sdev, &src->data.base_config, available_fmt, out_ref_rate, out_ref_channels, out_ref_valid_bits); if (output_format_index < 0) { @@ -1940,10 +1941,10 @@ static int sof_ipc4_prepare_src_module(struct snd_sof_widget *swidget, } /* update pipeline memory usage */ - sof_ipc4_update_resource_usage(sdev, swidget, &src->base_config); + sof_ipc4_update_resource_usage(sdev, swidget, &src->data.base_config); out_audio_fmt = &available_fmt->output_pin_fmts[output_format_index].audio_fmt; - src->sink_rate = out_audio_fmt->sampling_frequency; + src->data.sink_rate = out_audio_fmt->sampling_frequency; /* update pipeline_params for sink widgets */ return sof_ipc4_update_hw_params(sdev, pipeline_params, out_audio_fmt); @@ -2344,8 +2345,8 @@ static int sof_ipc4_widget_setup(struct snd_sof_dev *sdev, struct snd_sof_widget { struct sof_ipc4_src *src = swidget->private; - ipc_size = sizeof(struct sof_ipc4_base_module_cfg) + sizeof(src->sink_rate); - ipc_data = src; + ipc_size = sizeof(src->data); + ipc_data = &src->data; msg = &src->msg; break; diff --git a/sound/soc/sof/ipc4-topology.h b/sound/soc/sof/ipc4-topology.h index 0a57b8ab3e08..127caca5262a 100644 --- a/sound/soc/sof/ipc4-topology.h +++ b/sound/soc/sof/ipc4-topology.h @@ -404,16 +404,24 @@ struct sof_ipc4_mixer { struct sof_ipc4_msg msg; }; -/** - * struct sof_ipc4_src SRC config data +/* + * struct sof_ipc4_src_data - IPC data for SRC * @base_config: IPC base config data * @sink_rate: Output rate for sink module + */ +struct sof_ipc4_src_data { + struct sof_ipc4_base_module_cfg base_config; + uint32_t sink_rate; +} __packed __aligned(4); + +/** + * struct sof_ipc4_src - SRC config data + * @data: IPC base config data * @available_fmt: Available audio format * @msg: IPC4 message struct containing header and data info */ struct sof_ipc4_src { - struct sof_ipc4_base_module_cfg base_config; - uint32_t sink_rate; + struct sof_ipc4_src_data data; struct sof_ipc4_available_audio_format available_fmt; struct sof_ipc4_msg msg; }; -- cgit v1.2.3 From e238b68e6dc89ddab52bd98216fe5623e94792b1 Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Wed, 29 Nov 2023 15:14:11 +0200 Subject: ASoC: SOF: ipc4-topology: Correct data structures for the GAIN module Move the base_cfg to struct sof_ipc4_gain_data. This struct describes the message payload passed to the firmware via the mailbox. It is not wise to be 'clever' and try to use the first part of a struct as IPC message without marking the message section as packed and aligned. Signed-off-by: Peter Ujfalusi Reviewed-by: Pierre-Louis Bossart Reviewed-by: Bard Liao Reviewed-by: Ranjani Sridharan Link: https://lore.kernel.org/r/20231129131411.27516-3-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown --- sound/soc/sof/ipc4-control.c | 20 ++++++++++---------- sound/soc/sof/ipc4-topology.c | 31 +++++++++++++++---------------- sound/soc/sof/ipc4-topology.h | 18 +++++++++++++----- 3 files changed, 38 insertions(+), 31 deletions(-) diff --git a/sound/soc/sof/ipc4-control.c b/sound/soc/sof/ipc4-control.c index 938efaceb81c..b4cdcec33e12 100644 --- a/sound/soc/sof/ipc4-control.c +++ b/sound/soc/sof/ipc4-control.c @@ -89,7 +89,7 @@ sof_ipc4_set_volume_data(struct snd_sof_dev *sdev, struct snd_sof_widget *swidge struct sof_ipc4_control_data *cdata = scontrol->ipc_control_data; struct sof_ipc4_gain *gain = swidget->private; struct sof_ipc4_msg *msg = &cdata->msg; - struct sof_ipc4_gain_data data; + struct sof_ipc4_gain_params params; bool all_channels_equal = true; u32 value; int ret, i; @@ -109,20 +109,20 @@ sof_ipc4_set_volume_data(struct snd_sof_dev *sdev, struct snd_sof_widget *swidge */ for (i = 0; i < scontrol->num_channels; i++) { if (all_channels_equal) { - data.channels = SOF_IPC4_GAIN_ALL_CHANNELS_MASK; - data.init_val = cdata->chanv[0].value; + params.channels = SOF_IPC4_GAIN_ALL_CHANNELS_MASK; + params.init_val = cdata->chanv[0].value; } else { - data.channels = cdata->chanv[i].channel; - data.init_val = cdata->chanv[i].value; + params.channels = cdata->chanv[i].channel; + params.init_val = cdata->chanv[i].value; } /* set curve type and duration from topology */ - data.curve_duration_l = gain->data.curve_duration_l; - data.curve_duration_h = gain->data.curve_duration_h; - data.curve_type = gain->data.curve_type; + params.curve_duration_l = gain->data.params.curve_duration_l; + params.curve_duration_h = gain->data.params.curve_duration_h; + params.curve_type = gain->data.params.curve_type; - msg->data_ptr = &data; - msg->data_size = sizeof(data); + msg->data_ptr = ¶ms; + msg->data_size = sizeof(params); ret = sof_ipc4_set_get_kcontrol_data(scontrol, true, lock); msg->data_ptr = NULL; diff --git a/sound/soc/sof/ipc4-topology.c b/sound/soc/sof/ipc4-topology.c index fae415b9235d..e012b6e166ac 100644 --- a/sound/soc/sof/ipc4-topology.c +++ b/sound/soc/sof/ipc4-topology.c @@ -130,12 +130,12 @@ static const struct sof_topology_token comp_ext_tokens[] = { static const struct sof_topology_token gain_tokens[] = { {SOF_TKN_GAIN_RAMP_TYPE, SND_SOC_TPLG_TUPLE_TYPE_WORD, - get_token_u32, offsetof(struct sof_ipc4_gain_data, curve_type)}, + get_token_u32, offsetof(struct sof_ipc4_gain_params, curve_type)}, {SOF_TKN_GAIN_RAMP_DURATION, SND_SOC_TPLG_TUPLE_TYPE_WORD, get_token_u32, - offsetof(struct sof_ipc4_gain_data, curve_duration_l)}, + offsetof(struct sof_ipc4_gain_params, curve_duration_l)}, {SOF_TKN_GAIN_VAL, SND_SOC_TPLG_TUPLE_TYPE_WORD, - get_token_u32, offsetof(struct sof_ipc4_gain_data, init_val)}, + get_token_u32, offsetof(struct sof_ipc4_gain_params, init_val)}, }; /* SRC */ @@ -720,15 +720,15 @@ static int sof_ipc4_widget_setup_comp_pga(struct snd_sof_widget *swidget) swidget->private = gain; - gain->data.channels = SOF_IPC4_GAIN_ALL_CHANNELS_MASK; - gain->data.init_val = SOF_IPC4_VOL_ZERO_DB; + gain->data.params.channels = SOF_IPC4_GAIN_ALL_CHANNELS_MASK; + gain->data.params.init_val = SOF_IPC4_VOL_ZERO_DB; - ret = sof_ipc4_get_audio_fmt(scomp, swidget, &gain->available_fmt, &gain->base_config); + ret = sof_ipc4_get_audio_fmt(scomp, swidget, &gain->available_fmt, &gain->data.base_config); if (ret) goto err; - ret = sof_update_ipc_object(scomp, &gain->data, SOF_GAIN_TOKENS, swidget->tuples, - swidget->num_tuples, sizeof(gain->data), 1); + ret = sof_update_ipc_object(scomp, &gain->data.params, SOF_GAIN_TOKENS, + swidget->tuples, swidget->num_tuples, sizeof(gain->data), 1); if (ret) { dev_err(scomp->dev, "Parsing gain tokens failed\n"); goto err; @@ -736,8 +736,8 @@ static int sof_ipc4_widget_setup_comp_pga(struct snd_sof_widget *swidget) dev_dbg(scomp->dev, "pga widget %s: ramp type: %d, ramp duration %d, initial gain value: %#x\n", - swidget->widget->name, gain->data.curve_type, gain->data.curve_duration_l, - gain->data.init_val); + swidget->widget->name, gain->data.params.curve_type, + gain->data.params.curve_duration_l, gain->data.params.init_val); ret = sof_ipc4_widget_setup_msg(swidget, &gain->msg); if (ret) @@ -1826,7 +1826,7 @@ static int sof_ipc4_prepare_gain_module(struct snd_sof_widget *swidget, u32 out_ref_rate, out_ref_channels, out_ref_valid_bits; int ret; - ret = sof_ipc4_init_input_audio_fmt(sdev, swidget, &gain->base_config, + ret = sof_ipc4_init_input_audio_fmt(sdev, swidget, &gain->data.base_config, pipeline_params, available_fmt); if (ret < 0) return ret; @@ -1836,7 +1836,7 @@ static int sof_ipc4_prepare_gain_module(struct snd_sof_widget *swidget, out_ref_channels = SOF_IPC4_AUDIO_FORMAT_CFG_CHANNELS_COUNT(in_fmt->fmt_cfg); out_ref_valid_bits = SOF_IPC4_AUDIO_FORMAT_CFG_V_BIT_DEPTH(in_fmt->fmt_cfg); - ret = sof_ipc4_init_output_audio_fmt(sdev, &gain->base_config, available_fmt, + ret = sof_ipc4_init_output_audio_fmt(sdev, &gain->data.base_config, available_fmt, out_ref_rate, out_ref_channels, out_ref_valid_bits); if (ret < 0) { dev_err(sdev->dev, "Failed to initialize output format for %s", @@ -1845,7 +1845,7 @@ static int sof_ipc4_prepare_gain_module(struct snd_sof_widget *swidget, } /* update pipeline memory usage */ - sof_ipc4_update_resource_usage(sdev, swidget, &gain->base_config); + sof_ipc4_update_resource_usage(sdev, swidget, &gain->data.base_config); return 0; } @@ -2324,9 +2324,8 @@ static int sof_ipc4_widget_setup(struct snd_sof_dev *sdev, struct snd_sof_widget { struct sof_ipc4_gain *gain = swidget->private; - ipc_size = sizeof(struct sof_ipc4_base_module_cfg) + - sizeof(struct sof_ipc4_gain_data); - ipc_data = gain; + ipc_size = sizeof(gain->data); + ipc_data = &gain->data; msg = &gain->msg; break; diff --git a/sound/soc/sof/ipc4-topology.h b/sound/soc/sof/ipc4-topology.h index 127caca5262a..dce174a190dd 100644 --- a/sound/soc/sof/ipc4-topology.h +++ b/sound/soc/sof/ipc4-topology.h @@ -361,7 +361,7 @@ struct sof_ipc4_control_msg_payload { } __packed; /** - * struct sof_ipc4_gain_data - IPC gain blob + * struct sof_ipc4_gain_params - IPC gain parameters * @channels: Channels * @init_val: Initial value * @curve_type: Curve type @@ -369,24 +369,32 @@ struct sof_ipc4_control_msg_payload { * @curve_duration_l: Curve duration low part * @curve_duration_h: Curve duration high part */ -struct sof_ipc4_gain_data { +struct sof_ipc4_gain_params { uint32_t channels; uint32_t init_val; uint32_t curve_type; uint32_t reserved; uint32_t curve_duration_l; uint32_t curve_duration_h; -} __aligned(8); +} __packed __aligned(4); /** - * struct sof_ipc4_gain - gain config data + * struct sof_ipc4_gain_data - IPC gain init blob * @base_config: IPC base config data + * @params: Initial parameters for the gain module + */ +struct sof_ipc4_gain_data { + struct sof_ipc4_base_module_cfg base_config; + struct sof_ipc4_gain_params params; +} __packed __aligned(4); + +/** + * struct sof_ipc4_gain - gain config data * @data: IPC gain blob * @available_fmt: Available audio format * @msg: message structure for gain */ struct sof_ipc4_gain { - struct sof_ipc4_base_module_cfg base_config; struct sof_ipc4_gain_data data; struct sof_ipc4_available_audio_format available_fmt; struct sof_ipc4_msg msg; -- cgit v1.2.3 From 0e4237ae8d159e3d28f3cd83146a46f576ffb586 Mon Sep 17 00:00:00 2001 From: Ming Lei Date: Fri, 1 Dec 2023 16:56:05 +0800 Subject: blk-mq: don't count completed flush data request as inflight in case of quiesce Request queue quiesce may interrupt flush sequence, and the original request may have been marked as COMPLETE, but can't get finished because of queue quiesce. This way is fine from driver viewpoint, because flush sequence is block layer concept, and it isn't related with driver. However, driver(such as dm-rq) can call blk_mq_queue_inflight() to count & drain inflight requests, then the wait & drain never gets done because the completed & not-finished flush request is counted as inflight. Fix this issue by not counting completed flush data request as inflight in case of quiesce. Cc: Mike Snitzer Cc: David Jeffery Cc: John Pittman Signed-off-by: Ming Lei Link: https://lore.kernel.org/r/20231201085605.577730-1-ming.lei@redhat.com Signed-off-by: Jens Axboe --- block/blk-mq.c | 14 +++++++++++++- 1 file changed, 13 insertions(+), 1 deletion(-) diff --git a/block/blk-mq.c b/block/blk-mq.c index 900c1be1fee1..ac18f802c027 100644 --- a/block/blk-mq.c +++ b/block/blk-mq.c @@ -1512,14 +1512,26 @@ void blk_mq_delay_kick_requeue_list(struct request_queue *q, } EXPORT_SYMBOL(blk_mq_delay_kick_requeue_list); +static bool blk_is_flush_data_rq(struct request *rq) +{ + return (rq->rq_flags & RQF_FLUSH_SEQ) && !is_flush_rq(rq); +} + static bool blk_mq_rq_inflight(struct request *rq, void *priv) { /* * If we find a request that isn't idle we know the queue is busy * as it's checked in the iter. * Return false to stop the iteration. + * + * In case of queue quiesce, if one flush data request is completed, + * don't count it as inflight given the flush sequence is suspended, + * and the original flush data request is invisible to driver, just + * like other pending requests because of quiesce */ - if (blk_mq_request_started(rq)) { + if (blk_mq_request_started(rq) && !(blk_queue_quiesced(rq->q) && + blk_is_flush_data_rq(rq) && + blk_mq_request_completed(rq))) { bool *busy = priv; *busy = true; -- cgit v1.2.3 From 480b3e73720f6b5d76bef2387b1f9d19ed67573b Mon Sep 17 00:00:00 2001 From: Steve Sistare Date: Fri, 3 Nov 2023 05:26:27 -0700 Subject: vdpa/mlx5: preserve CVQ vringh index MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit mlx5_vdpa does not preserve userland's view of vring base for the control queue in the following sequence: ioctl VHOST_SET_VRING_BASE ioctl VHOST_VDPA_SET_STATUS VIRTIO_CONFIG_S_DRIVER_OK mlx5_vdpa_set_status() setup_cvq_vring() vringh_init_iotlb() vringh_init_kern() vrh->last_avail_idx = 0; ioctl VHOST_GET_VRING_BASE To fix, restore the value of cvq->vring.last_avail_idx after calling vringh_init_iotlb. Fixes: 5262912ef3cf ("vdpa/mlx5: Add support for control VQ and MAC setting") Signed-off-by: Steve Sistare Acked-by: Eugenio Pérez Acked-by: Jason Wang Message-Id: <1699014387-194368-1-git-send-email-steven.sistare@oracle.com> Signed-off-by: Michael S. Tsirkin --- drivers/vdpa/mlx5/net/mlx5_vnet.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/vdpa/mlx5/net/mlx5_vnet.c b/drivers/vdpa/mlx5/net/mlx5_vnet.c index 12ac3397f39b..26ba7da6b410 100644 --- a/drivers/vdpa/mlx5/net/mlx5_vnet.c +++ b/drivers/vdpa/mlx5/net/mlx5_vnet.c @@ -2815,13 +2815,18 @@ static int setup_cvq_vring(struct mlx5_vdpa_dev *mvdev) struct mlx5_control_vq *cvq = &mvdev->cvq; int err = 0; - if (mvdev->actual_features & BIT_ULL(VIRTIO_NET_F_CTRL_VQ)) + if (mvdev->actual_features & BIT_ULL(VIRTIO_NET_F_CTRL_VQ)) { + u16 idx = cvq->vring.last_avail_idx; + err = vringh_init_iotlb(&cvq->vring, mvdev->actual_features, MLX5_CVQ_MAX_ENT, false, (struct vring_desc *)(uintptr_t)cvq->desc_addr, (struct vring_avail *)(uintptr_t)cvq->driver_addr, (struct vring_used *)(uintptr_t)cvq->device_addr); + if (!err) + cvq->vring.last_avail_idx = cvq->vring.last_used_idx = idx; + } return err; } -- cgit v1.2.3 From 4f317d6529d7fc3ab7769ef89645d43fc7eec61b Mon Sep 17 00:00:00 2001 From: Shannon Nelson Date: Fri, 10 Nov 2023 14:18:00 -0800 Subject: pds_vdpa: fix up format-truncation complaint Our friendly kernel test robot has recently been pointing out some format-truncation issues. Here's a fix for one of them. Reported-by: kernel test robot Closes: https://lore.kernel.org/oe-kbuild-all/202311040109.RfgJoE7L-lkp@intel.com/ Signed-off-by: Shannon Nelson Message-Id: <20231110221802.46841-2-shannon.nelson@amd.com> Signed-off-by: Michael S. Tsirkin Acked-by: Jason Wang --- drivers/vdpa/pds/debugfs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/vdpa/pds/debugfs.c b/drivers/vdpa/pds/debugfs.c index 9b04aad6ec35..c328e694f6e7 100644 --- a/drivers/vdpa/pds/debugfs.c +++ b/drivers/vdpa/pds/debugfs.c @@ -261,7 +261,7 @@ void pds_vdpa_debugfs_add_vdpadev(struct pds_vdpa_aux *vdpa_aux) debugfs_create_file("config", 0400, vdpa_aux->dentry, vdpa_aux->pdsv, &config_fops); for (i = 0; i < vdpa_aux->pdsv->num_vqs; i++) { - char name[8]; + char name[16]; snprintf(name, sizeof(name), "vq%02d", i); debugfs_create_file(name, 0400, vdpa_aux->dentry, -- cgit v1.2.3 From dd3b8de16e90c5594eddd29aeeb99e97c6f863be Mon Sep 17 00:00:00 2001 From: Shannon Nelson Date: Fri, 10 Nov 2023 14:18:01 -0800 Subject: pds_vdpa: clear config callback when status goes to 0 If the client driver is setting status to 0, something is getting shutdown and possibly removed. Make sure we clear the config_cb so that it doesn't end up crashing when trying to call a bogus callback. Signed-off-by: Shannon Nelson Message-Id: <20231110221802.46841-3-shannon.nelson@amd.com> Signed-off-by: Michael S. Tsirkin Acked-by: Jason Wang --- drivers/vdpa/pds/vdpa_dev.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/vdpa/pds/vdpa_dev.c b/drivers/vdpa/pds/vdpa_dev.c index 52b2449182ad..9fc89c82d1f0 100644 --- a/drivers/vdpa/pds/vdpa_dev.c +++ b/drivers/vdpa/pds/vdpa_dev.c @@ -461,8 +461,10 @@ static void pds_vdpa_set_status(struct vdpa_device *vdpa_dev, u8 status) pds_vdpa_cmd_set_status(pdsv, status); - /* Note: still working with FW on the need for this reset cmd */ if (status == 0) { + struct vdpa_callback null_cb = { }; + + pds_vdpa_set_config_cb(vdpa_dev, &null_cb); pds_vdpa_cmd_reset(pdsv); for (i = 0; i < pdsv->num_vqs; i++) { -- cgit v1.2.3 From cefc9ba6aed48a3aa085888e3262ac2aa975714b Mon Sep 17 00:00:00 2001 From: Shannon Nelson Date: Fri, 10 Nov 2023 14:18:02 -0800 Subject: pds_vdpa: set features order Fix up the order that the device and negotiated features are checked to get a more reliable difference when things get changed. Signed-off-by: Shannon Nelson Message-Id: <20231110221802.46841-4-shannon.nelson@amd.com> Signed-off-by: Michael S. Tsirkin Acked-by: Jason Wang --- drivers/vdpa/pds/vdpa_dev.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/vdpa/pds/vdpa_dev.c b/drivers/vdpa/pds/vdpa_dev.c index 9fc89c82d1f0..25c0fe5ec3d5 100644 --- a/drivers/vdpa/pds/vdpa_dev.c +++ b/drivers/vdpa/pds/vdpa_dev.c @@ -318,9 +318,8 @@ static int pds_vdpa_set_driver_features(struct vdpa_device *vdpa_dev, u64 featur return -EOPNOTSUPP; } - pdsv->negotiated_features = nego_features; - driver_features = pds_vdpa_get_driver_features(vdpa_dev); + pdsv->negotiated_features = nego_features; dev_dbg(dev, "%s: %#llx => %#llx\n", __func__, driver_features, nego_features); -- cgit v1.2.3 From 74fbc88e161424b3b96a22b23a8e3e1edab9d05c Mon Sep 17 00:00:00 2001 From: Keith Busch Date: Tue, 28 Nov 2023 09:36:04 -0800 Subject: nvme-core: check for too small lba shift The block layer doesn't support logical block sizes smaller than 512 bytes. The nvme spec doesn't support that small either, but the driver isn't checking to make sure the device responded with usable data. Failing to catch this will result in a kernel bug, either from a division by zero when stacking, or a zero length bio. Reviewed-by: Jens Axboe Signed-off-by: Keith Busch --- drivers/nvme/host/core.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c index a55c2a774b9c..1be1ce522896 100644 --- a/drivers/nvme/host/core.c +++ b/drivers/nvme/host/core.c @@ -1901,9 +1901,10 @@ static void nvme_update_disk_info(struct gendisk *disk, /* * The block layer can't support LBA sizes larger than the page size - * yet, so catch this early and don't allow block I/O. + * or smaller than a sector size yet, so catch this early and don't + * allow block I/O. */ - if (ns->lba_shift > PAGE_SHIFT) { + if (ns->lba_shift > PAGE_SHIFT || ns->lba_shift < SECTOR_SHIFT) { capacity = 0; bs = (1 << 9); } -- cgit v1.2.3 From 087e15206d6ac0d46734e2b0ab34370c0fdca481 Mon Sep 17 00:00:00 2001 From: Sean Christopherson Date: Wed, 18 Oct 2023 13:46:22 -0700 Subject: KVM: Set file_operations.owner appropriately for all such structures Set .owner for all KVM-owned filed types so that the KVM module is pinned until any files with callbacks back into KVM are completely freed. Using "struct kvm" as a proxy for the module, i.e. keeping KVM-the-module alive while there are active VMs, doesn't provide full protection. Userspace can invoke delete_module() the instant the last reference to KVM is put. If KVM itself puts the last reference, e.g. via kvm_destroy_vm(), then it's possible for KVM to be preempted and deleted/unloaded before KVM fully exits, e.g. when the task running kvm_destroy_vm() is scheduled back in, it will jump to a code page that is no longer mapped. Note, file types that can call into sub-module code, e.g. kvm-intel.ko or kvm-amd.ko on x86, must use the module pointer passed to kvm_init(), not THIS_MODULE (which points at kvm.ko). KVM assumes that if /dev/kvm is reachable, e.g. VMs are active, then the vendor module is loaded. To reduce the probability of forgetting to set .owner entirely, use THIS_MODULE for stats files where KVM does not call back into vendor code. This reverts commit 70375c2d8fa3fb9b0b59207a9c5df1e2e1205c10, and fixes several other file types that have been buggy since their introduction. Fixes: 70375c2d8fa3 ("Revert "KVM: set owner of cpu and vm file operations"") Fixes: 3bcd0662d66f ("KVM: X86: Introduce mmu_rmaps_stat per-vm debugfs file") Reported-by: Al Viro Link: https://lore.kernel.org/all/20231010003746.GN800259@ZenIV Link: https://lore.kernel.org/r/20231018204624.1905300-2-seanjc@google.com Signed-off-by: Sean Christopherson --- arch/x86/kvm/debugfs.c | 1 + virt/kvm/kvm_main.c | 11 ++++++++--- 2 files changed, 9 insertions(+), 3 deletions(-) diff --git a/arch/x86/kvm/debugfs.c b/arch/x86/kvm/debugfs.c index ee8c4c3496ed..eea6ea7f14af 100644 --- a/arch/x86/kvm/debugfs.c +++ b/arch/x86/kvm/debugfs.c @@ -182,6 +182,7 @@ static int kvm_mmu_rmaps_stat_release(struct inode *inode, struct file *file) } static const struct file_operations mmu_rmaps_stat_fops = { + .owner = THIS_MODULE, .open = kvm_mmu_rmaps_stat_open, .read = seq_read, .llseek = seq_lseek, diff --git a/virt/kvm/kvm_main.c b/virt/kvm/kvm_main.c index 486800a7024b..1e65a506985f 100644 --- a/virt/kvm/kvm_main.c +++ b/virt/kvm/kvm_main.c @@ -3887,7 +3887,7 @@ static int kvm_vcpu_release(struct inode *inode, struct file *filp) return 0; } -static const struct file_operations kvm_vcpu_fops = { +static struct file_operations kvm_vcpu_fops = { .release = kvm_vcpu_release, .unlocked_ioctl = kvm_vcpu_ioctl, .mmap = kvm_vcpu_mmap, @@ -4081,6 +4081,7 @@ static int kvm_vcpu_stats_release(struct inode *inode, struct file *file) } static const struct file_operations kvm_vcpu_stats_fops = { + .owner = THIS_MODULE, .read = kvm_vcpu_stats_read, .release = kvm_vcpu_stats_release, .llseek = noop_llseek, @@ -4431,7 +4432,7 @@ static int kvm_device_release(struct inode *inode, struct file *filp) return 0; } -static const struct file_operations kvm_device_fops = { +static struct file_operations kvm_device_fops = { .unlocked_ioctl = kvm_device_ioctl, .release = kvm_device_release, KVM_COMPAT(kvm_device_ioctl), @@ -4759,6 +4760,7 @@ static int kvm_vm_stats_release(struct inode *inode, struct file *file) } static const struct file_operations kvm_vm_stats_fops = { + .owner = THIS_MODULE, .read = kvm_vm_stats_read, .release = kvm_vm_stats_release, .llseek = noop_llseek, @@ -5060,7 +5062,7 @@ static long kvm_vm_compat_ioctl(struct file *filp, } #endif -static const struct file_operations kvm_vm_fops = { +static struct file_operations kvm_vm_fops = { .release = kvm_vm_release, .unlocked_ioctl = kvm_vm_ioctl, .llseek = noop_llseek, @@ -6095,6 +6097,9 @@ int kvm_init(unsigned vcpu_size, unsigned vcpu_align, struct module *module) goto err_async_pf; kvm_chardev_ops.owner = module; + kvm_vm_fops.owner = module; + kvm_vcpu_fops.owner = module; + kvm_device_fops.owner = module; kvm_preempt_ops.sched_in = kvm_sched_in; kvm_preempt_ops.sched_out = kvm_sched_out; -- cgit v1.2.3 From ea61294befd361ab8260c65d53987b400e5599a7 Mon Sep 17 00:00:00 2001 From: Sean Christopherson Date: Wed, 18 Oct 2023 13:46:24 -0700 Subject: Revert "KVM: Prevent module exit until all VMs are freed" Revert KVM's misguided attempt to "fix" a use-after-module-unload bug that was actually due to failure to flush a workqueue, not a lack of module refcounting. Pinning the KVM module until kvm_vm_destroy() doesn't prevent use-after-free due to the module being unloaded, as userspace can invoke delete_module() the instant the last reference to KVM is put, i.e. can cause all KVM code to be unmapped while KVM is actively executing said code. Generally speaking, the many instances of module_put(THIS_MODULE) notwithstanding, outside of a few special paths, a module can never safely put the last reference to itself without creating deadlock, i.e. something external to the module *must* put the last reference. In other words, having VMs grab a reference to the KVM module is futile, pointless, and as evidenced by the now-reverted commit 70375c2d8fa3 ("Revert "KVM: set owner of cpu and vm file operations""), actively dangerous. This reverts commit 405294f29faee5de8c10cb9d4a90e229c2835279 and commit 5f6de5cbebee925a612856fce6f9182bb3eee0db. Fixes: 405294f29fae ("KVM: Unconditionally get a ref to /dev/kvm module when creating a VM") Fixes: 5f6de5cbebee ("KVM: Prevent module exit until all VMs are freed") Link: https://lore.kernel.org/r/20231018204624.1905300-4-seanjc@google.com Signed-off-by: Sean Christopherson --- virt/kvm/kvm_main.c | 7 ------- 1 file changed, 7 deletions(-) diff --git a/virt/kvm/kvm_main.c b/virt/kvm/kvm_main.c index 1e65a506985f..3b1b9e8dd70c 100644 --- a/virt/kvm/kvm_main.c +++ b/virt/kvm/kvm_main.c @@ -115,8 +115,6 @@ EXPORT_SYMBOL_GPL(kvm_debugfs_dir); static const struct file_operations stat_fops_per_vm; -static struct file_operations kvm_chardev_ops; - static long kvm_vcpu_ioctl(struct file *file, unsigned int ioctl, unsigned long arg); #ifdef CONFIG_KVM_COMPAT @@ -1157,9 +1155,6 @@ static struct kvm *kvm_create_vm(unsigned long type, const char *fdname) if (!kvm) return ERR_PTR(-ENOMEM); - /* KVM is pinned via open("/dev/kvm"), the fd passed to this ioctl(). */ - __module_get(kvm_chardev_ops.owner); - KVM_MMU_LOCK_INIT(kvm); mmgrab(current->mm); kvm->mm = current->mm; @@ -1279,7 +1274,6 @@ out_err_no_irq_srcu: out_err_no_srcu: kvm_arch_free_vm(kvm); mmdrop(current->mm); - module_put(kvm_chardev_ops.owner); return ERR_PTR(r); } @@ -1348,7 +1342,6 @@ static void kvm_destroy_vm(struct kvm *kvm) preempt_notifier_dec(); hardware_disable_all(); mmdrop(mm); - module_put(kvm_chardev_ops.owner); } void kvm_get_kvm(struct kvm *kvm) -- cgit v1.2.3 From ef8d89033c3f1f6a64757f066b2c17e76d1189f8 Mon Sep 17 00:00:00 2001 From: Like Xu Date: Sat, 7 Oct 2023 14:40:19 +0800 Subject: KVM: x86: Remove 'return void' expression for 'void function' The requested info will be stored in 'guest_xsave->region' referenced by the incoming pointer "struct kvm_xsave *guest_xsave", thus there is no need to explicitly use return void expression for a void function "static void kvm_vcpu_ioctl_x86_get_xsave(...)". The issue is caught with [-Wpedantic]. Fixes: 2d287ec65e79 ("x86/fpu: Allow caller to constrain xfeatures when copying to uabi buffer") Signed-off-by: Like Xu Reviewed-by: Maxim Levitsky Link: https://lore.kernel.org/r/20231007064019.17472-1-likexu@tencent.com Signed-off-by: Sean Christopherson --- arch/x86/kvm/x86.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index 3b6a0109191b..a8bebf5c0a05 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -5411,8 +5411,8 @@ static void kvm_vcpu_ioctl_x86_get_xsave2(struct kvm_vcpu *vcpu, static void kvm_vcpu_ioctl_x86_get_xsave(struct kvm_vcpu *vcpu, struct kvm_xsave *guest_xsave) { - return kvm_vcpu_ioctl_x86_get_xsave2(vcpu, (void *)guest_xsave->region, - sizeof(guest_xsave->region)); + kvm_vcpu_ioctl_x86_get_xsave2(vcpu, (void *)guest_xsave->region, + sizeof(guest_xsave->region)); } static int kvm_vcpu_ioctl_x86_set_xsave(struct kvm_vcpu *vcpu, -- cgit v1.2.3 From c467e97f079f0019870c314996fae952cc768e82 Mon Sep 17 00:00:00 2001 From: David Jeffery Date: Tue, 28 Nov 2023 13:11:39 -0500 Subject: md/raid6: use valid sector values to determine if an I/O should wait on the reshape During a reshape or a RAID6 array such as expanding by adding an additional disk, I/Os to the region of the array which have not yet been reshaped can stall indefinitely. This is from errors in the stripe_ahead_of_reshape function causing md to think the I/O is to a region in the actively undergoing the reshape. stripe_ahead_of_reshape fails to account for the q disk having a sector value of 0. By not excluding the q disk from the for loop, raid6 will always generate a min_sector value of 0, causing a return value which stalls. The function's max_sector calculation also uses min() when it should use max(), causing the max_sector value to always be 0. During a backwards rebuild this can cause the opposite problem where it allows I/O to advance when it should wait. Fixing these errors will allow safe I/O to advance in a timely manner and delay only I/O which is unsafe due to stripes in the middle of undergoing the reshape. Fixes: 486f60558607 ("md/raid5: Check all disks in a stripe_head for reshape progress") Cc: stable@vger.kernel.org # v6.0+ Signed-off-by: David Jeffery Tested-by: Laurence Oberman Signed-off-by: Song Liu Link: https://lore.kernel.org/r/20231128181233.6187-1-djeffery@redhat.com --- drivers/md/raid5.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index dc031d42f53b..26e1e8a5e941 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -5892,11 +5892,11 @@ static bool stripe_ahead_of_reshape(struct mddev *mddev, struct r5conf *conf, int dd_idx; for (dd_idx = 0; dd_idx < sh->disks; dd_idx++) { - if (dd_idx == sh->pd_idx) + if (dd_idx == sh->pd_idx || dd_idx == sh->qd_idx) continue; min_sector = min(min_sector, sh->dev[dd_idx].sector); - max_sector = min(max_sector, sh->dev[dd_idx].sector); + max_sector = max(max_sector, sh->dev[dd_idx].sector); } spin_lock_irq(&conf->device_lock); -- cgit v1.2.3 From dfce9cb3140592b886838e06f3e0c25fea2a9cae Mon Sep 17 00:00:00 2001 From: Yonghong Song Date: Thu, 30 Nov 2023 18:46:40 -0800 Subject: bpf: Fix a verifier bug due to incorrect branch offset comparison with cpu=v4 Bpf cpu=v4 support is introduced in [1] and Commit 4cd58e9af8b9 ("bpf: Support new 32bit offset jmp instruction") added support for new 32bit offset jmp instruction. Unfortunately, in function bpf_adj_delta_to_off(), for new branch insn with 32bit offset, the offset (plus/minor a small delta) compares to 16-bit offset bound [S16_MIN, S16_MAX], which caused the following verification failure: $ ./test_progs-cpuv4 -t verif_scale_pyperf180 ... insn 10 cannot be patched due to 16-bit range ... libbpf: failed to load object 'pyperf180.bpf.o' scale_test:FAIL:expect_success unexpected error: -12 (errno 12) #405 verif_scale_pyperf180:FAIL Note that due to recent llvm18 development, the patch [2] (already applied in bpf-next) needs to be applied to bpf tree for testing purpose. The fix is rather simple. For 32bit offset branch insn, the adjusted offset compares to [S32_MIN, S32_MAX] and then verification succeeded. [1] https://lore.kernel.org/all/20230728011143.3710005-1-yonghong.song@linux.dev [2] https://lore.kernel.org/bpf/20231110193644.3130906-1-yonghong.song@linux.dev Fixes: 4cd58e9af8b9 ("bpf: Support new 32bit offset jmp instruction") Signed-off-by: Yonghong Song Signed-off-by: Andrii Nakryiko Link: https://lore.kernel.org/bpf/20231201024640.3417057-1-yonghong.song@linux.dev --- kernel/bpf/core.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) diff --git a/kernel/bpf/core.c b/kernel/bpf/core.c index cd3afe57ece3..fe254ae035fe 100644 --- a/kernel/bpf/core.c +++ b/kernel/bpf/core.c @@ -371,14 +371,18 @@ static int bpf_adj_delta_to_imm(struct bpf_insn *insn, u32 pos, s32 end_old, static int bpf_adj_delta_to_off(struct bpf_insn *insn, u32 pos, s32 end_old, s32 end_new, s32 curr, const bool probe_pass) { - const s32 off_min = S16_MIN, off_max = S16_MAX; + s64 off_min, off_max, off; s32 delta = end_new - end_old; - s32 off; - if (insn->code == (BPF_JMP32 | BPF_JA)) + if (insn->code == (BPF_JMP32 | BPF_JA)) { off = insn->imm; - else + off_min = S32_MIN; + off_max = S32_MAX; + } else { off = insn->off; + off_min = S16_MIN; + off_max = S16_MAX; + } if (curr < pos && curr + off + 1 >= end_old) off += delta; -- cgit v1.2.3 From 16b55b1f2269962fb6b5154b8bf43f37c9a96637 Mon Sep 17 00:00:00 2001 From: Thinh Tran Date: Thu, 30 Nov 2023 18:19:11 -0600 Subject: net/tg3: fix race condition in tg3_reset_task() When an EEH error is encountered by a PCI adapter, the EEH driver modifies the PCI channel's state as shown below: enum { /* I/O channel is in normal state */ pci_channel_io_normal = (__force pci_channel_state_t) 1, /* I/O to channel is blocked */ pci_channel_io_frozen = (__force pci_channel_state_t) 2, /* PCI card is dead */ pci_channel_io_perm_failure = (__force pci_channel_state_t) 3, }; If the same EEH error then causes the tg3 driver's transmit timeout logic to execute, the tg3_tx_timeout() function schedules a reset task via tg3_reset_task_schedule(), which may cause a race condition between the tg3 and EEH driver as both attempt to recover the HW via a reset action. EEH driver gets error event --> eeh_set_channel_state() and set device to one of error state above scheduler: tg3_reset_task() get returned error from tg3_init_hw() --> dev_close() shuts down the interface tg3_io_slot_reset() and tg3_io_resume() fail to reset/resume the device To resolve this issue, we avoid the race condition by checking the PCI channel state in the tg3_reset_task() function and skip the tg3 driver initiated reset when the PCI channel is not in the normal state. (The driver has no access to tg3 device registers at this point and cannot even complete the reset task successfully without external assistance.) We'll leave the reset procedure to be managed by the EEH driver which calls the tg3_io_error_detected(), tg3_io_slot_reset() and tg3_io_resume() functions as appropriate. Adding the same checking in tg3_dump_state() to avoid dumping all device registers when the PCI channel is not in the normal state. Signed-off-by: Thinh Tran Tested-by: Venkata Sai Duggi Reviewed-by: David Christensen Reviewed-by: Michael Chan Link: https://lore.kernel.org/r/20231201001911.656-1-thinhtr@linux.vnet.ibm.com Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/broadcom/tg3.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c index 48b6191efa56..f52830dfb26a 100644 --- a/drivers/net/ethernet/broadcom/tg3.c +++ b/drivers/net/ethernet/broadcom/tg3.c @@ -6474,6 +6474,14 @@ static void tg3_dump_state(struct tg3 *tp) int i; u32 *regs; + /* If it is a PCI error, all registers will be 0xffff, + * we don't dump them out, just report the error and return + */ + if (tp->pdev->error_state != pci_channel_io_normal) { + netdev_err(tp->dev, "PCI channel ERROR!\n"); + return; + } + regs = kzalloc(TG3_REG_BLK_SIZE, GFP_ATOMIC); if (!regs) return; @@ -11259,7 +11267,8 @@ static void tg3_reset_task(struct work_struct *work) rtnl_lock(); tg3_full_lock(tp, 0); - if (tp->pcierr_recovery || !netif_running(tp->dev)) { + if (tp->pcierr_recovery || !netif_running(tp->dev) || + tp->pdev->error_state != pci_channel_io_normal) { tg3_flag_clear(tp, RESET_TASK_PENDING); tg3_full_unlock(tp); rtnl_unlock(); -- cgit v1.2.3 From 6c89f49964375c904cea33c0247467873f4daf2c Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Wed, 29 Nov 2023 21:58:53 -0800 Subject: hv_netvsc: rndis_filter needs to select NLS rndis_filter uses utf8s_to_utf16s() which is provided by setting NLS, so select NLS to fix the build error: ERROR: modpost: "utf8s_to_utf16s" [drivers/net/hyperv/hv_netvsc.ko] undefined! Fixes: 1ce09e899d28 ("hyperv: Add support for setting MAC from within guests") Signed-off-by: Randy Dunlap Cc: Haiyang Zhang Cc: K. Y. Srinivasan Cc: Wei Liu Cc: Dexuan Cui Reviewed-by: Simon Horman Tested-by: Simon Horman # build-tested Reviewed-by: Michael Kelley Link: https://lore.kernel.org/r/20231130055853.19069-1-rdunlap@infradead.org Signed-off-by: Jakub Kicinski --- drivers/net/hyperv/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/hyperv/Kconfig b/drivers/net/hyperv/Kconfig index ca7bf7f897d3..c8cbd85adcf9 100644 --- a/drivers/net/hyperv/Kconfig +++ b/drivers/net/hyperv/Kconfig @@ -3,5 +3,6 @@ config HYPERV_NET tristate "Microsoft Hyper-V virtual network driver" depends on HYPERV select UCS2_STRING + select NLS help Select this option to enable the Hyper-V virtual network driver. -- cgit v1.2.3 From 9b8493dc43044376716d789d07699f17d538a7c4 Mon Sep 17 00:00:00 2001 From: "Borislav Petkov (AMD)" Date: Fri, 1 Dec 2023 19:37:27 +0100 Subject: x86/CPU/AMD: Check vendor in the AMD microcode callback Commit in Fixes added an AMD-specific microcode callback. However, it didn't check the CPU vendor the kernel runs on explicitly. The only reason the Zenbleed check in it didn't run on other x86 vendors hardware was pure coincidental luck: if (!cpu_has_amd_erratum(c, amd_zenbleed)) return; gives true on other vendors because they don't have those families and models. However, with the removal of the cpu_has_amd_erratum() in 05f5f73936fa ("x86/CPU/AMD: Drop now unused CPU erratum checking function") that coincidental condition is gone, leading to the zenbleed check getting executed on other vendors too. Add the explicit vendor check for the whole callback as it should've been done in the first place. Fixes: 522b1d69219d ("x86/cpu/amd: Add a Zenbleed fix") Cc: Signed-off-by: Borislav Petkov (AMD) Link: https://lore.kernel.org/r/20231201184226.16749-1-bp@alien8.de --- arch/x86/kernel/cpu/amd.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c index a7eab05e5f29..f322ebd053a9 100644 --- a/arch/x86/kernel/cpu/amd.c +++ b/arch/x86/kernel/cpu/amd.c @@ -1320,6 +1320,9 @@ static void zenbleed_check_cpu(void *unused) void amd_check_microcode(void) { + if (boot_cpu_data.x86_vendor != X86_VENDOR_AMD) + return; + on_each_cpu(zenbleed_check_cpu, NULL, 1); } -- cgit v1.2.3 From 9f6acd2b4dfef81dcc45486ac704cf602c88db02 Mon Sep 17 00:00:00 2001 From: Sam Edwards Date: Fri, 1 Dec 2023 23:12:12 -0800 Subject: arm64: dts: rockchip: Fix Turing RK1 interrupt pinctrls The pinctrls for the hym8563 interrupt line and fan-tach input were both mistakenly defined as `pcfg_pull_none`. As these are active-low signals (level-triggered, in the hym8563 case) which may not be driven at times, these should really be pull-up. The lack of any bias results in spurious interrupts. Fix this by modifying the `rockchip,pins` properties as necessary to enable the pull-up resistors. Fixes: 2806a69f3fef6 ("arm64: dts: rockchip: Add Turing RK1 SoM support") Signed-off-by: Sam Edwards Link: https://lore.kernel.org/r/20231202071212.1606800-1-CFSworks@gmail.com Signed-off-by: Heiko Stuebner --- arch/arm64/boot/dts/rockchip/rk3588-turing-rk1.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm64/boot/dts/rockchip/rk3588-turing-rk1.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-turing-rk1.dtsi index 9570b34aca2e..d88c0e852356 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-turing-rk1.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3588-turing-rk1.dtsi @@ -235,13 +235,13 @@ &pinctrl { fan { fan_int: fan-int { - rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>; }; }; hym8563 { hym8563_int: hym8563-int { - rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>; }; }; -- cgit v1.2.3 From 4b0768b6556af56ee9b7cf4e68452a2b6289ae45 Mon Sep 17 00:00:00 2001 From: ChunHao Lin Date: Wed, 29 Nov 2023 23:53:50 +0800 Subject: r8169: fix rtl8125b PAUSE frames blasting when suspended When FIFO reaches near full state, device will issue pause frame. If pause slot is enabled(set to 1), in this time, device will issue pause frame only once. But if pause slot is disabled(set to 0), device will keep sending pause frames until FIFO reaches near empty state. When pause slot is disabled, if there is no one to handle receive packets, device FIFO will reach near full state and keep sending pause frames. That will impact entire local area network. This issue can be reproduced in Chromebox (not Chromebook) in developer mode running a test image (and v5.10 kernel): 1) ping -f $CHROMEBOX (from workstation on same local network) 2) run "powerd_dbus_suspend" from command line on the $CHROMEBOX 3) ping $ROUTER (wait until ping fails from workstation) Takes about ~20-30 seconds after step 2 for the local network to stop working. Fix this issue by enabling pause slot to only send pause frame once when FIFO reaches near full state. Fixes: f1bce4ad2f1c ("r8169: add support for RTL8125") Reported-by: Grant Grundler Tested-by: Grant Grundler Cc: stable@vger.kernel.org Signed-off-by: ChunHao Lin Reviewed-by: Jacob Keller Reviewed-by: Heiner Kallweit Link: https://lore.kernel.org/r/20231129155350.5843-1-hau@realtek.com Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/realtek/r8169_main.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/realtek/r8169_main.c b/drivers/net/ethernet/realtek/r8169_main.c index 62cabeeb842a..bb787a52bc75 100644 --- a/drivers/net/ethernet/realtek/r8169_main.c +++ b/drivers/net/ethernet/realtek/r8169_main.c @@ -196,6 +196,7 @@ enum rtl_registers { /* No threshold before first PCI xfer */ #define RX_FIFO_THRESH (7 << RXCFG_FIFO_SHIFT) #define RX_EARLY_OFF (1 << 11) +#define RX_PAUSE_SLOT_ON (1 << 11) /* 8125b and later */ #define RXCFG_DMA_SHIFT 8 /* Unlimited maximum PCI burst. */ #define RX_DMA_BURST (7 << RXCFG_DMA_SHIFT) @@ -2306,9 +2307,13 @@ static void rtl_init_rxcfg(struct rtl8169_private *tp) case RTL_GIGA_MAC_VER_40 ... RTL_GIGA_MAC_VER_53: RTL_W32(tp, RxConfig, RX128_INT_EN | RX_MULTI_EN | RX_DMA_BURST | RX_EARLY_OFF); break; - case RTL_GIGA_MAC_VER_61 ... RTL_GIGA_MAC_VER_63: + case RTL_GIGA_MAC_VER_61: RTL_W32(tp, RxConfig, RX_FETCH_DFLT_8125 | RX_DMA_BURST); break; + case RTL_GIGA_MAC_VER_63: + RTL_W32(tp, RxConfig, RX_FETCH_DFLT_8125 | RX_DMA_BURST | + RX_PAUSE_SLOT_ON); + break; default: RTL_W32(tp, RxConfig, RX128_INT_EN | RX_DMA_BURST); break; -- cgit v1.2.3 From c5c325bb5849868d76969d3fe014515f5e99eabc Mon Sep 17 00:00:00 2001 From: Pascal Noël Date: Fri, 1 Dec 2023 17:37:44 -0800 Subject: ALSA: hda/realtek: Apply quirk for ASUS UM3504DA MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The ASUS UM3504DA uses a Realtek HDA codec and two CS35L41 amplifiers via I2C. Apply existing quirk to model. Signed-off-by: Pascal Noël Cc: Link: https://lore.kernel.org/r/20231202013744.12369-1-pascal@pascalcompiles.com Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index f9ddacfd920e..ddd74f5d3b30 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -9963,6 +9963,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x1043, 0x17f3, "ROG Ally RC71L_RC71L", ALC294_FIXUP_ASUS_ALLY), SND_PCI_QUIRK(0x1043, 0x1881, "ASUS Zephyrus S/M", ALC294_FIXUP_ASUS_GX502_PINS), SND_PCI_QUIRK(0x1043, 0x18b1, "Asus MJ401TA", ALC256_FIXUP_ASUS_HEADSET_MIC), + SND_PCI_QUIRK(0x1043, 0x18d3, "ASUS UM3504DA", ALC294_FIXUP_CS35L41_I2C_2), SND_PCI_QUIRK(0x1043, 0x18f1, "Asus FX505DT", ALC256_FIXUP_ASUS_HEADSET_MIC), SND_PCI_QUIRK(0x1043, 0x194e, "ASUS UX563FD", ALC294_FIXUP_ASUS_HPE), SND_PCI_QUIRK(0x1043, 0x1970, "ASUS UX550VE", ALC289_FIXUP_ASUS_GA401), -- cgit v1.2.3 From 33cc938e65a98f1d29d0a18403dbbee050dcad9a Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sun, 3 Dec 2023 18:52:56 +0900 Subject: Linux 6.7-rc4 --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index 99db546fbb45..511b5616aa41 100644 --- a/Makefile +++ b/Makefile @@ -2,7 +2,7 @@ VERSION = 6 PATCHLEVEL = 7 SUBLEVEL = 0 -EXTRAVERSION = -rc3 +EXTRAVERSION = -rc4 NAME = Hurr durr I'ma ninja sloth # *DOCUMENTATION* -- cgit v1.2.3 From 35fe2ad259a3bfca15ab78c8ffb5278cb6149c89 Mon Sep 17 00:00:00 2001 From: Christophe JAILLET Date: Sun, 3 Dec 2023 16:24:05 +0100 Subject: hwmon: (nzxt-kraken2) Fix error handling path in kraken2_probe() There is no point in calling hid_hw_stop() if hid_hw_start() has failed. There is no point in calling hid_hw_close() if hid_hw_open() has failed. Update the error handling path accordingly. Fixes: 82e3430dfa8c ("hwmon: add driver for NZXT Kraken X42/X52/X62/X72") Reported-by: Aleksa Savic Closes: https://lore.kernel.org/all/121470f0-6c1f-418a-844c-7ec2e8a54b8e@gmail.com/ Signed-off-by: Christophe JAILLET Reviewed-by: Jonas Malaco Link: https://lore.kernel.org/r/a768e69851a07a1f4e29f270f4e2559063f07343.1701617030.git.christophe.jaillet@wanadoo.fr Signed-off-by: Guenter Roeck --- drivers/hwmon/nzxt-kraken2.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/hwmon/nzxt-kraken2.c b/drivers/hwmon/nzxt-kraken2.c index 428c77b5fce5..7caf387eb144 100644 --- a/drivers/hwmon/nzxt-kraken2.c +++ b/drivers/hwmon/nzxt-kraken2.c @@ -161,13 +161,13 @@ static int kraken2_probe(struct hid_device *hdev, ret = hid_hw_start(hdev, HID_CONNECT_HIDRAW); if (ret) { hid_err(hdev, "hid hw start failed with %d\n", ret); - goto fail_and_stop; + return ret; } ret = hid_hw_open(hdev); if (ret) { hid_err(hdev, "hid hw open failed with %d\n", ret); - goto fail_and_close; + goto fail_and_stop; } priv->hwmon_dev = hwmon_device_register_with_info(&hdev->dev, "kraken2", -- cgit v1.2.3 From 0117591e69d1edff46bc87061e533a1e25a8c500 Mon Sep 17 00:00:00 2001 From: Kent Overstreet Date: Thu, 30 Nov 2023 23:32:20 -0500 Subject: bcachefs: Don't drop journal pins in exit path There's no need to drop journal pins in our exit paths - the code was trying to have everything cleaned up on any shutdown, but better to just tweak the assertions a bit. This fixes a bug where calling into journal reclaim in the exit path would cass a null ptr deref. Signed-off-by: Kent Overstreet --- fs/bcachefs/btree_cache.c | 8 +++----- fs/bcachefs/btree_io.c | 4 ++-- fs/bcachefs/btree_io.h | 3 --- fs/bcachefs/btree_key_cache.c | 2 -- 4 files changed, 5 insertions(+), 12 deletions(-) diff --git a/fs/bcachefs/btree_cache.c b/fs/bcachefs/btree_cache.c index 47e7770d0583..79495cd7a794 100644 --- a/fs/bcachefs/btree_cache.c +++ b/fs/bcachefs/btree_cache.c @@ -9,6 +9,7 @@ #include "debug.h" #include "errcode.h" #include "error.h" +#include "journal.h" #include "trace.h" #include @@ -424,14 +425,11 @@ void bch2_fs_btree_cache_exit(struct bch_fs *c) BUG_ON(btree_node_read_in_flight(b) || btree_node_write_in_flight(b)); - if (btree_node_dirty(b)) - bch2_btree_complete_write(c, b, btree_current_write(b)); - clear_btree_node_dirty_acct(c, b); - btree_node_data_free(c, b); } - BUG_ON(atomic_read(&c->btree_cache.dirty)); + BUG_ON(!bch2_journal_error(&c->journal) && + atomic_read(&c->btree_cache.dirty)); list_splice(&bc->freed_pcpu, &bc->freed_nonpcpu); diff --git a/fs/bcachefs/btree_io.c b/fs/bcachefs/btree_io.c index 57c20390e10e..5a720f0cd5a6 100644 --- a/fs/bcachefs/btree_io.c +++ b/fs/bcachefs/btree_io.c @@ -1704,8 +1704,8 @@ int bch2_btree_root_read(struct bch_fs *c, enum btree_id id, return bch2_trans_run(c, __bch2_btree_root_read(trans, id, k, level)); } -void bch2_btree_complete_write(struct bch_fs *c, struct btree *b, - struct btree_write *w) +static void bch2_btree_complete_write(struct bch_fs *c, struct btree *b, + struct btree_write *w) { unsigned long old, new, v = READ_ONCE(b->will_make_reachable); diff --git a/fs/bcachefs/btree_io.h b/fs/bcachefs/btree_io.h index 7e03dd76fb38..e0d7fa5b1dfb 100644 --- a/fs/bcachefs/btree_io.h +++ b/fs/bcachefs/btree_io.h @@ -134,9 +134,6 @@ void bch2_btree_node_read(struct bch_fs *, struct btree *, bool); int bch2_btree_root_read(struct bch_fs *, enum btree_id, const struct bkey_i *, unsigned); -void bch2_btree_complete_write(struct bch_fs *, struct btree *, - struct btree_write *); - bool bch2_btree_post_write_cleanup(struct bch_fs *, struct btree *); enum btree_write_flags { diff --git a/fs/bcachefs/btree_key_cache.c b/fs/bcachefs/btree_key_cache.c index 37fbf22de8fc..1b7a5668df7c 100644 --- a/fs/bcachefs/btree_key_cache.c +++ b/fs/bcachefs/btree_key_cache.c @@ -992,8 +992,6 @@ void bch2_fs_btree_key_cache_exit(struct btree_key_cache *bc) list_for_each_entry_safe(ck, n, &items, list) { cond_resched(); - bch2_journal_pin_drop(&c->journal, &ck->journal); - list_del(&ck->list); kfree(ck->k); six_lock_exit(&ck->c.lock); -- cgit v1.2.3 From f7b32e785042d2357c5abc23ca6db1b92c91a070 Mon Sep 17 00:00:00 2001 From: Pavel Begunkov Date: Sun, 3 Dec 2023 15:37:53 +0000 Subject: io_uring: fix mutex_unlock with unreferenced ctx Callers of mutex_unlock() have to make sure that the mutex stays alive for the whole duration of the function call. For io_uring that means that the following pattern is not valid unless we ensure that the context outlives the mutex_unlock() call. mutex_lock(&ctx->uring_lock); req_put(req); // typically via io_req_task_submit() mutex_unlock(&ctx->uring_lock); Most contexts are fine: io-wq pins requests, syscalls hold the file, task works are taking ctx references and so on. However, the task work fallback path doesn't follow the rule. Cc: Fixes: 04fc6c802d ("io_uring: save ctx put/get for task_work submit") Reported-by: Jann Horn Signed-off-by: Pavel Begunkov Link: https://lore.kernel.org/io-uring/CAG48ez3xSoYb+45f1RLtktROJrpiDQ1otNvdR+YLQf7m+Krj5Q@mail.gmail.com/ Signed-off-by: Jens Axboe --- io_uring/io_uring.c | 9 +++------ 1 file changed, 3 insertions(+), 6 deletions(-) diff --git a/io_uring/io_uring.c b/io_uring/io_uring.c index aba5657d287e..9626a363f121 100644 --- a/io_uring/io_uring.c +++ b/io_uring/io_uring.c @@ -271,6 +271,7 @@ static __cold void io_fallback_req_func(struct work_struct *work) struct io_kiocb *req, *tmp; struct io_tw_state ts = { .locked = true, }; + percpu_ref_get(&ctx->refs); mutex_lock(&ctx->uring_lock); llist_for_each_entry_safe(req, tmp, node, io_task_work.node) req->io_task_work.func(req, &ts); @@ -278,6 +279,7 @@ static __cold void io_fallback_req_func(struct work_struct *work) return; io_submit_flush_completions(ctx); mutex_unlock(&ctx->uring_lock); + percpu_ref_put(&ctx->refs); } static int io_alloc_hash_table(struct io_hash_table *table, unsigned bits) @@ -3146,12 +3148,7 @@ static __cold void io_ring_exit_work(struct work_struct *work) init_completion(&exit.completion); init_task_work(&exit.task_work, io_tctx_exit_cb); exit.ctx = ctx; - /* - * Some may use context even when all refs and requests have been put, - * and they are free to do so while still holding uring_lock or - * completion_lock, see io_req_task_submit(). Apart from other work, - * this lock/unlock section also waits them to finish. - */ + mutex_lock(&ctx->uring_lock); while (!list_empty(&ctx->tctx_list)) { WARN_ON_ONCE(time_after(jiffies, timeout)); -- cgit v1.2.3 From 88ac06a9f938c158bbeafec16adb483b0c66142f Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Sat, 2 Dec 2023 11:49:37 +0100 Subject: Revert "debugfs: annotate debugfs handlers vs. removal with lockdep" This reverts commit f4acfcd4deb1 ("debugfs: annotate debugfs handlers vs. removal with lockdep"), it appears to have false positives and really shouldn't have been in the -rc series with the fixes anyway. Signed-off-by: Johannes Berg Link: https://lore.kernel.org/r/20231202114936.fd55431ab160.I911aa53abeeca138126f690d383a89b13eb05667@changeid Signed-off-by: Greg Kroah-Hartman --- fs/debugfs/file.c | 10 ---------- fs/debugfs/inode.c | 7 ------- fs/debugfs/internal.h | 6 ------ 3 files changed, 23 deletions(-) diff --git a/fs/debugfs/file.c b/fs/debugfs/file.c index a5ade8c16375..5063434be0fc 100644 --- a/fs/debugfs/file.c +++ b/fs/debugfs/file.c @@ -108,12 +108,6 @@ int debugfs_file_get(struct dentry *dentry) kfree(fsd); fsd = READ_ONCE(dentry->d_fsdata); } -#ifdef CONFIG_LOCKDEP - fsd->lock_name = kasprintf(GFP_KERNEL, "debugfs:%pd", dentry); - lockdep_register_key(&fsd->key); - lockdep_init_map(&fsd->lockdep_map, fsd->lock_name ?: "debugfs", - &fsd->key, 0); -#endif INIT_LIST_HEAD(&fsd->cancellations); mutex_init(&fsd->cancellations_mtx); } @@ -132,8 +126,6 @@ int debugfs_file_get(struct dentry *dentry) if (!refcount_inc_not_zero(&fsd->active_users)) return -EIO; - lock_map_acquire_read(&fsd->lockdep_map); - return 0; } EXPORT_SYMBOL_GPL(debugfs_file_get); @@ -151,8 +143,6 @@ void debugfs_file_put(struct dentry *dentry) { struct debugfs_fsdata *fsd = READ_ONCE(dentry->d_fsdata); - lock_map_release(&fsd->lockdep_map); - if (refcount_dec_and_test(&fsd->active_users)) complete(&fsd->active_users_drained); } diff --git a/fs/debugfs/inode.c b/fs/debugfs/inode.c index e4e7fe1bd9fb..034a617cb1a5 100644 --- a/fs/debugfs/inode.c +++ b/fs/debugfs/inode.c @@ -243,10 +243,6 @@ static void debugfs_release_dentry(struct dentry *dentry) /* check it wasn't a dir (no fsdata) or automount (no real_fops) */ if (fsd && fsd->real_fops) { -#ifdef CONFIG_LOCKDEP - lockdep_unregister_key(&fsd->key); - kfree(fsd->lock_name); -#endif WARN_ON(!list_empty(&fsd->cancellations)); mutex_destroy(&fsd->cancellations_mtx); } @@ -755,9 +751,6 @@ static void __debugfs_file_removed(struct dentry *dentry) if ((unsigned long)fsd & DEBUGFS_FSDATA_IS_REAL_FOPS_BIT) return; - lock_map_acquire(&fsd->lockdep_map); - lock_map_release(&fsd->lockdep_map); - /* if we hit zero, just wait for all to finish */ if (!refcount_dec_and_test(&fsd->active_users)) { wait_for_completion(&fsd->active_users_drained); diff --git a/fs/debugfs/internal.h b/fs/debugfs/internal.h index 0c4c68cf161f..dae80c2a469e 100644 --- a/fs/debugfs/internal.h +++ b/fs/debugfs/internal.h @@ -7,7 +7,6 @@ #ifndef _DEBUGFS_INTERNAL_H_ #define _DEBUGFS_INTERNAL_H_ -#include #include struct file_operations; @@ -25,11 +24,6 @@ struct debugfs_fsdata { struct { refcount_t active_users; struct completion active_users_drained; -#ifdef CONFIG_LOCKDEP - struct lockdep_map lockdep_map; - struct lock_class_key key; - char *lock_name; -#endif /* protect cancellations */ struct mutex cancellations_mtx; -- cgit v1.2.3 From 4181ef7dbb63e638739e929bca5b7bca3a37a311 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Mon, 30 Oct 2023 21:09:09 -0700 Subject: greybus: BeaglePlay driver needs CRC_CCITT The gb-beagleplay driver uses crc_ccitt(), so it should select CRC_CCITT to make sure that the function is available. Fixes these build errors: s390-linux-ld: drivers/greybus/gb-beagleplay.o: in function `hdlc_append_tx_u8': gb-beagleplay.c:(.text+0x2c0): undefined reference to `crc_ccitt' s390-linux-ld: drivers/greybus/gb-beagleplay.o: in function `hdlc_rx_frame': gb-beagleplay.c:(.text+0x6a0): undefined reference to `crc_ccitt' Fixes: ec558bbfea67 ("greybus: Add BeaglePlay Linux Driver") Signed-off-by: Randy Dunlap Cc: Ayush Singh Cc: Johan Hovold Cc: Alex Elder Cc: greybus-dev@lists.linaro.org Link: https://lore.kernel.org/r/20231031040909.21201-1-rdunlap@infradead.org Reviewed-by: Ayush Singh Signed-off-by: Greg Kroah-Hartman --- drivers/greybus/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/greybus/Kconfig b/drivers/greybus/Kconfig index 033d31dbf3b8..ab81ceceb337 100644 --- a/drivers/greybus/Kconfig +++ b/drivers/greybus/Kconfig @@ -20,6 +20,7 @@ if GREYBUS config GREYBUS_BEAGLEPLAY tristate "Greybus BeaglePlay driver" depends on SERIAL_DEV_BUS + select CRC_CCITT help Select this option if you have a BeaglePlay where CC1352 co-processor acts as Greybus SVC. -- cgit v1.2.3 From 52eb67861ebeb2110318bd9fe33d85ddcf92aac7 Mon Sep 17 00:00:00 2001 From: Ayush Singh Date: Sun, 3 Dec 2023 13:23:10 +0530 Subject: greybus: gb-beagleplay: Ensure le for values in transport Ensure that the following values are little-endian: - header->pad (which is used for cport_id) - header->size Fixes: ec558bbfea67 ("greybus: Add BeaglePlay Linux Driver") Reported-by: kernel test robot Closes: https://lore.kernel.org/r/202311072329.Xogj7hGW-lkp@intel.com/ Signed-off-by: Ayush Singh Link: https://lore.kernel.org/r/20231203075312.255233-1-ayushdevel1325@gmail.com Signed-off-by: Greg Kroah-Hartman --- drivers/greybus/gb-beagleplay.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/drivers/greybus/gb-beagleplay.c b/drivers/greybus/gb-beagleplay.c index 43318c1993ba..1e70ff7e3da4 100644 --- a/drivers/greybus/gb-beagleplay.c +++ b/drivers/greybus/gb-beagleplay.c @@ -93,9 +93,9 @@ static void hdlc_rx_greybus_frame(struct gb_beagleplay *bg, u8 *buf, u16 len) memcpy(&cport_id, hdr->pad, sizeof(cport_id)); dev_dbg(&bg->sd->dev, "Greybus Operation %u type %X cport %u status %u received", - hdr->operation_id, hdr->type, cport_id, hdr->result); + hdr->operation_id, hdr->type, le16_to_cpu(cport_id), hdr->result); - greybus_data_rcvd(bg->gb_hd, cport_id, buf, len); + greybus_data_rcvd(bg->gb_hd, le16_to_cpu(cport_id), buf, len); } static void hdlc_rx_dbg_frame(const struct gb_beagleplay *bg, const char *buf, u16 len) @@ -340,14 +340,15 @@ static int gb_message_send(struct gb_host_device *hd, u16 cport, struct gb_messa { struct gb_beagleplay *bg = dev_get_drvdata(&hd->dev); struct hdlc_payload payloads[2]; + __le16 cport_id = le16_to_cpu(cport); dev_dbg(&hd->dev, "Sending greybus message with Operation %u, Type: %X on Cport %u", msg->header->operation_id, msg->header->type, cport); - if (msg->header->size > RX_HDLC_PAYLOAD) + if (le16_to_cpu(msg->header->size) > RX_HDLC_PAYLOAD) return dev_err_probe(&hd->dev, -E2BIG, "Greybus message too big"); - memcpy(msg->header->pad, &cport, sizeof(cport)); + memcpy(msg->header->pad, &cport_id, sizeof(cport_id)); payloads[0].buf = msg->header; payloads[0].len = sizeof(*msg->header); -- cgit v1.2.3 From c55e0a55b165202f18cbc4a20650d2e1becd5507 Mon Sep 17 00:00:00 2001 From: Tyler Fanelli Date: Tue, 19 Sep 2023 22:40:00 -0400 Subject: fuse: Rename DIRECT_IO_RELAX to DIRECT_IO_ALLOW_MMAP Although DIRECT_IO_RELAX's initial usage is to allow shared mmap, its description indicates a purpose of reducing memory footprint. This may imply that it could be further used to relax other DIRECT_IO operations in the future. Replace it with a flag DIRECT_IO_ALLOW_MMAP which does only one thing, allow shared mmap of DIRECT_IO files while still bypassing the cache on regular reads and writes. [Miklos] Also Keep DIRECT_IO_RELAX definition for backward compatibility. Signed-off-by: Tyler Fanelli Fixes: e78662e818f9 ("fuse: add a new fuse init flag to relax restrictions in no cache mode") Cc: # v6.6 Signed-off-by: Miklos Szeredi --- fs/fuse/file.c | 6 +++--- fs/fuse/fuse_i.h | 4 ++-- fs/fuse/inode.c | 6 +++--- include/uapi/linux/fuse.h | 10 ++++++---- 4 files changed, 14 insertions(+), 12 deletions(-) diff --git a/fs/fuse/file.c b/fs/fuse/file.c index 1cdb6327511e..89e870d1a526 100644 --- a/fs/fuse/file.c +++ b/fs/fuse/file.c @@ -1448,7 +1448,7 @@ ssize_t fuse_direct_io(struct fuse_io_priv *io, struct iov_iter *iter, if (!ia) return -ENOMEM; - if (fopen_direct_io && fc->direct_io_relax) { + if (fopen_direct_io && fc->direct_io_allow_mmap) { res = filemap_write_and_wait_range(mapping, pos, pos + count - 1); if (res) { fuse_io_free(ia); @@ -2466,9 +2466,9 @@ static int fuse_file_mmap(struct file *file, struct vm_area_struct *vma) if (ff->open_flags & FOPEN_DIRECT_IO) { /* Can't provide the coherency needed for MAP_SHARED - * if FUSE_DIRECT_IO_RELAX isn't set. + * if FUSE_DIRECT_IO_ALLOW_MMAP isn't set. */ - if ((vma->vm_flags & VM_MAYSHARE) && !fc->direct_io_relax) + if ((vma->vm_flags & VM_MAYSHARE) && !fc->direct_io_allow_mmap) return -ENODEV; invalidate_inode_pages2(file->f_mapping); diff --git a/fs/fuse/fuse_i.h b/fs/fuse/fuse_i.h index 6e6e721f421b..69bcffaf4832 100644 --- a/fs/fuse/fuse_i.h +++ b/fs/fuse/fuse_i.h @@ -797,8 +797,8 @@ struct fuse_conn { /* Is tmpfile not implemented by fs? */ unsigned int no_tmpfile:1; - /* relax restrictions in FOPEN_DIRECT_IO mode */ - unsigned int direct_io_relax:1; + /* Relax restrictions to allow shared mmap in FOPEN_DIRECT_IO mode */ + unsigned int direct_io_allow_mmap:1; /* Is statx not implemented by fs? */ unsigned int no_statx:1; diff --git a/fs/fuse/inode.c b/fs/fuse/inode.c index 74d4f09d5827..88090c6026a7 100644 --- a/fs/fuse/inode.c +++ b/fs/fuse/inode.c @@ -1230,8 +1230,8 @@ static void process_init_reply(struct fuse_mount *fm, struct fuse_args *args, fc->init_security = 1; if (flags & FUSE_CREATE_SUPP_GROUP) fc->create_supp_group = 1; - if (flags & FUSE_DIRECT_IO_RELAX) - fc->direct_io_relax = 1; + if (flags & FUSE_DIRECT_IO_ALLOW_MMAP) + fc->direct_io_allow_mmap = 1; } else { ra_pages = fc->max_read / PAGE_SIZE; fc->no_lock = 1; @@ -1278,7 +1278,7 @@ void fuse_send_init(struct fuse_mount *fm) FUSE_NO_OPENDIR_SUPPORT | FUSE_EXPLICIT_INVAL_DATA | FUSE_HANDLE_KILLPRIV_V2 | FUSE_SETXATTR_EXT | FUSE_INIT_EXT | FUSE_SECURITY_CTX | FUSE_CREATE_SUPP_GROUP | - FUSE_HAS_EXPIRE_ONLY | FUSE_DIRECT_IO_RELAX; + FUSE_HAS_EXPIRE_ONLY | FUSE_DIRECT_IO_ALLOW_MMAP; #ifdef CONFIG_FUSE_DAX if (fm->fc->dax) flags |= FUSE_MAP_ALIGNMENT; diff --git a/include/uapi/linux/fuse.h b/include/uapi/linux/fuse.h index db92a7202b34..e7418d15fe39 100644 --- a/include/uapi/linux/fuse.h +++ b/include/uapi/linux/fuse.h @@ -209,7 +209,7 @@ * - add FUSE_HAS_EXPIRE_ONLY * * 7.39 - * - add FUSE_DIRECT_IO_RELAX + * - add FUSE_DIRECT_IO_ALLOW_MMAP * - add FUSE_STATX and related structures */ @@ -409,8 +409,7 @@ struct fuse_file_lock { * FUSE_CREATE_SUPP_GROUP: add supplementary group info to create, mkdir, * symlink and mknod (single group that matches parent) * FUSE_HAS_EXPIRE_ONLY: kernel supports expiry-only entry invalidation - * FUSE_DIRECT_IO_RELAX: relax restrictions in FOPEN_DIRECT_IO mode, for now - * allow shared mmap + * FUSE_DIRECT_IO_ALLOW_MMAP: allow shared mmap in FOPEN_DIRECT_IO mode. */ #define FUSE_ASYNC_READ (1 << 0) #define FUSE_POSIX_LOCKS (1 << 1) @@ -449,7 +448,10 @@ struct fuse_file_lock { #define FUSE_HAS_INODE_DAX (1ULL << 33) #define FUSE_CREATE_SUPP_GROUP (1ULL << 34) #define FUSE_HAS_EXPIRE_ONLY (1ULL << 35) -#define FUSE_DIRECT_IO_RELAX (1ULL << 36) +#define FUSE_DIRECT_IO_ALLOW_MMAP (1ULL << 36) + +/* Obsolete alias for FUSE_DIRECT_IO_ALLOW_MMAP */ +#define FUSE_DIRECT_IO_RELAX FUSE_DIRECT_IO_ALLOW_MMAP /** * CUSE INIT request/reply flags -- cgit v1.2.3 From 11ca77cdcca17cec909d2b97404ddacfec0acafd Mon Sep 17 00:00:00 2001 From: Tyler Fanelli Date: Tue, 19 Sep 2023 22:40:01 -0400 Subject: docs/fuse-io: Document the usage of DIRECT_IO_ALLOW_MMAP By default, shared mmap is disabled in FUSE DIRECT_IO mode. However, when the DIRECT_IO_ALLOW_MMAP flag is enabled in the FUSE_INIT reply, shared mmap is allowed. Signed-off-by: Tyler Fanelli Signed-off-by: Miklos Szeredi --- Documentation/filesystems/fuse-io.rst | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/Documentation/filesystems/fuse-io.rst b/Documentation/filesystems/fuse-io.rst index 255a368fe534..6464de4266ad 100644 --- a/Documentation/filesystems/fuse-io.rst +++ b/Documentation/filesystems/fuse-io.rst @@ -15,7 +15,8 @@ The direct-io mode can be selected with the FOPEN_DIRECT_IO flag in the FUSE_OPEN reply. In direct-io mode the page cache is completely bypassed for reads and writes. -No read-ahead takes place. Shared mmap is disabled. +No read-ahead takes place. Shared mmap is disabled by default. To allow shared +mmap, the FUSE_DIRECT_IO_ALLOW_MMAP flag may be enabled in the FUSE_INIT reply. In cached mode reads may be satisfied from the page cache, and data may be read-ahead by the kernel to fill the cache. The cache is always kept consistent -- cgit v1.2.3 From c4d361f66ac91db8fc65061a9671682f61f4ca9d Mon Sep 17 00:00:00 2001 From: Krister Johansen Date: Fri, 3 Nov 2023 10:39:47 -0700 Subject: fuse: share lookup state between submount and its parent Fuse submounts do not perform a lookup for the nodeid that they inherit from their parent. Instead, the code decrements the nlookup on the submount's fuse_inode when it is instantiated, and no forget is performed when a submount root is evicted. Trouble arises when the submount's parent is evicted despite the submount itself being in use. In this author's case, the submount was in a container and deatched from the initial mount namespace via a MNT_DEATCH operation. When memory pressure triggered the shrinker, the inode from the parent was evicted, which triggered enough forgets to render the submount's nodeid invalid. Since submounts should still function, even if their parent goes away, solve this problem by sharing refcounted state between the parent and its submount. When all of the references on this shared state reach zero, it's safe to forget the final lookup of the fuse nodeid. Signed-off-by: Krister Johansen Cc: stable@vger.kernel.org Fixes: 1866d779d5d2 ("fuse: Allow fuse_fill_super_common() for submounts") Signed-off-by: Miklos Szeredi --- fs/fuse/fuse_i.h | 15 ++++++++++++ fs/fuse/inode.c | 75 +++++++++++++++++++++++++++++++++++++++++++++++++++++--- 2 files changed, 87 insertions(+), 3 deletions(-) diff --git a/fs/fuse/fuse_i.h b/fs/fuse/fuse_i.h index 69bcffaf4832..1df83eebda92 100644 --- a/fs/fuse/fuse_i.h +++ b/fs/fuse/fuse_i.h @@ -63,6 +63,19 @@ struct fuse_forget_link { struct fuse_forget_link *next; }; +/* Submount lookup tracking */ +struct fuse_submount_lookup { + /** Refcount */ + refcount_t count; + + /** Unique ID, which identifies the inode between userspace + * and kernel */ + u64 nodeid; + + /** The request used for sending the FORGET message */ + struct fuse_forget_link *forget; +}; + /** FUSE inode */ struct fuse_inode { /** Inode data */ @@ -158,6 +171,8 @@ struct fuse_inode { */ struct fuse_inode_dax *dax; #endif + /** Submount specific lookup tracking */ + struct fuse_submount_lookup *submount_lookup; }; /** FUSE inode state bits */ diff --git a/fs/fuse/inode.c b/fs/fuse/inode.c index 88090c6026a7..2a6d44f91729 100644 --- a/fs/fuse/inode.c +++ b/fs/fuse/inode.c @@ -68,6 +68,24 @@ struct fuse_forget_link *fuse_alloc_forget(void) return kzalloc(sizeof(struct fuse_forget_link), GFP_KERNEL_ACCOUNT); } +static struct fuse_submount_lookup *fuse_alloc_submount_lookup(void) +{ + struct fuse_submount_lookup *sl; + + sl = kzalloc(sizeof(struct fuse_submount_lookup), GFP_KERNEL_ACCOUNT); + if (!sl) + return NULL; + sl->forget = fuse_alloc_forget(); + if (!sl->forget) + goto out_free; + + return sl; + +out_free: + kfree(sl); + return NULL; +} + static struct inode *fuse_alloc_inode(struct super_block *sb) { struct fuse_inode *fi; @@ -83,6 +101,7 @@ static struct inode *fuse_alloc_inode(struct super_block *sb) fi->attr_version = 0; fi->orig_ino = 0; fi->state = 0; + fi->submount_lookup = NULL; mutex_init(&fi->mutex); spin_lock_init(&fi->lock); fi->forget = fuse_alloc_forget(); @@ -113,6 +132,17 @@ static void fuse_free_inode(struct inode *inode) kmem_cache_free(fuse_inode_cachep, fi); } +static void fuse_cleanup_submount_lookup(struct fuse_conn *fc, + struct fuse_submount_lookup *sl) +{ + if (!refcount_dec_and_test(&sl->count)) + return; + + fuse_queue_forget(fc, sl->forget, sl->nodeid, 1); + sl->forget = NULL; + kfree(sl); +} + static void fuse_evict_inode(struct inode *inode) { struct fuse_inode *fi = get_fuse_inode(inode); @@ -132,6 +162,11 @@ static void fuse_evict_inode(struct inode *inode) fi->nlookup); fi->forget = NULL; } + + if (fi->submount_lookup) { + fuse_cleanup_submount_lookup(fc, fi->submount_lookup); + fi->submount_lookup = NULL; + } } if (S_ISREG(inode->i_mode) && !fuse_is_bad(inode)) { WARN_ON(!list_empty(&fi->write_files)); @@ -330,6 +365,13 @@ void fuse_change_attributes(struct inode *inode, struct fuse_attr *attr, fuse_dax_dontcache(inode, attr->flags); } +static void fuse_init_submount_lookup(struct fuse_submount_lookup *sl, + u64 nodeid) +{ + sl->nodeid = nodeid; + refcount_set(&sl->count, 1); +} + static void fuse_init_inode(struct inode *inode, struct fuse_attr *attr, struct fuse_conn *fc) { @@ -392,12 +434,22 @@ struct inode *fuse_iget(struct super_block *sb, u64 nodeid, */ if (fc->auto_submounts && (attr->flags & FUSE_ATTR_SUBMOUNT) && S_ISDIR(attr->mode)) { + struct fuse_inode *fi; + inode = new_inode(sb); if (!inode) return NULL; fuse_init_inode(inode, attr, fc); - get_fuse_inode(inode)->nodeid = nodeid; + fi = get_fuse_inode(inode); + fi->nodeid = nodeid; + fi->submount_lookup = fuse_alloc_submount_lookup(); + if (!fi->submount_lookup) { + iput(inode); + return NULL; + } + /* Sets nlookup = 1 on fi->submount_lookup->nlookup */ + fuse_init_submount_lookup(fi->submount_lookup, nodeid); inode->i_flags |= S_AUTOMOUNT; goto done; } @@ -420,11 +472,11 @@ retry: iput(inode); goto retry; } -done: fi = get_fuse_inode(inode); spin_lock(&fi->lock); fi->nlookup++; spin_unlock(&fi->lock); +done: fuse_change_attributes(inode, attr, NULL, attr_valid, attr_version); return inode; @@ -1465,6 +1517,8 @@ static int fuse_fill_super_submount(struct super_block *sb, struct super_block *parent_sb = parent_fi->inode.i_sb; struct fuse_attr root_attr; struct inode *root; + struct fuse_submount_lookup *sl; + struct fuse_inode *fi; fuse_sb_defaults(sb); fm->sb = sb; @@ -1487,12 +1541,27 @@ static int fuse_fill_super_submount(struct super_block *sb, * its nlookup should not be incremented. fuse_iget() does * that, though, so undo it here. */ - get_fuse_inode(root)->nlookup--; + fi = get_fuse_inode(root); + fi->nlookup--; + sb->s_d_op = &fuse_dentry_operations; sb->s_root = d_make_root(root); if (!sb->s_root) return -ENOMEM; + /* + * Grab the parent's submount_lookup pointer and take a + * reference on the shared nlookup from the parent. This is to + * prevent the last forget for this nodeid from getting + * triggered until all users have finished with it. + */ + sl = parent_fi->submount_lookup; + WARN_ON(!sl); + if (sl) { + refcount_inc(&sl->count); + fi->submount_lookup = sl; + } + return 0; } -- cgit v1.2.3 From 7f8ed28d1401320bcb02dda81b3c23ab2dc5a6d8 Mon Sep 17 00:00:00 2001 From: Hangyu Hua Date: Thu, 16 Nov 2023 15:57:26 +0800 Subject: fuse: dax: set fc->dax to NULL in fuse_dax_conn_free() fuse_dax_conn_free() will be called when fuse_fill_super_common() fails after fuse_dax_conn_alloc(). Then deactivate_locked_super() in virtio_fs_get_tree() will call virtio_kill_sb() to release the discarded superblock. This will call fuse_dax_conn_free() again in fuse_conn_put(), resulting in a possible double free. Fixes: 1dd539577c42 ("virtiofs: add a mount option to enable dax") Signed-off-by: Hangyu Hua Acked-by: Vivek Goyal Reviewed-by: Jingbo Xu Cc: # v5.10 Signed-off-by: Miklos Szeredi --- fs/fuse/dax.c | 1 + 1 file changed, 1 insertion(+) diff --git a/fs/fuse/dax.c b/fs/fuse/dax.c index 23904a6a9a96..12ef91d170bb 100644 --- a/fs/fuse/dax.c +++ b/fs/fuse/dax.c @@ -1222,6 +1222,7 @@ void fuse_dax_conn_free(struct fuse_conn *fc) if (fc->dax) { fuse_free_dax_mem_ranges(&fc->dax->free_ranges); kfree(fc->dax); + fc->dax = NULL; } } -- cgit v1.2.3 From 3f29f1c336c0e8a4bec52f1e5217f88835553e5b Mon Sep 17 00:00:00 2001 From: Amir Goldstein Date: Sun, 3 Dec 2023 09:42:33 +0200 Subject: fuse: disable FOPEN_PARALLEL_DIRECT_WRITES with FUSE_DIRECT_IO_ALLOW_MMAP The new fuse init flag FUSE_DIRECT_IO_ALLOW_MMAP breaks assumptions made by FOPEN_PARALLEL_DIRECT_WRITES and causes test generic/095 to hit BUG_ON(fi->writectr < 0) assertions in fuse_set_nowrite(): generic/095 5s ... kernel BUG at fs/fuse/dir.c:1756! ... ? fuse_set_nowrite+0x3d/0xdd ? do_raw_spin_unlock+0x88/0x8f ? _raw_spin_unlock+0x2d/0x43 ? fuse_range_is_writeback+0x71/0x84 fuse_sync_writes+0xf/0x19 fuse_direct_io+0x167/0x5bd fuse_direct_write_iter+0xf0/0x146 Auto disable FOPEN_PARALLEL_DIRECT_WRITES when server negotiated FUSE_DIRECT_IO_ALLOW_MMAP. Fixes: e78662e818f9 ("fuse: add a new fuse init flag to relax restrictions in no cache mode") Cc: # v6.6 Signed-off-by: Amir Goldstein Signed-off-by: Miklos Szeredi --- fs/fuse/file.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/fs/fuse/file.c b/fs/fuse/file.c index 89e870d1a526..a660f1f21540 100644 --- a/fs/fuse/file.c +++ b/fs/fuse/file.c @@ -1574,6 +1574,7 @@ static ssize_t fuse_direct_write_iter(struct kiocb *iocb, struct iov_iter *from) ssize_t res; bool exclusive_lock = !(ff->open_flags & FOPEN_PARALLEL_DIRECT_WRITES) || + get_fuse_conn(inode)->direct_io_allow_mmap || iocb->ki_flags & IOCB_APPEND || fuse_direct_write_extending_i_size(iocb, from); @@ -1581,6 +1582,7 @@ static ssize_t fuse_direct_write_iter(struct kiocb *iocb, struct iov_iter *from) * Take exclusive lock if * - Parallel direct writes are disabled - a user space decision * - Parallel direct writes are enabled and i_size is being extended. + * - Shared mmap on direct_io file is supported (FUSE_DIRECT_IO_ALLOW_MMAP). * This might not be needed at all, but needs further investigation. */ if (exclusive_lock) -- cgit v1.2.3 From 2d880bfa4a97002962d5be148725197be98b191a Mon Sep 17 00:00:00 2001 From: Jiri Kosina Date: Mon, 4 Dec 2023 10:37:15 +0100 Subject: mailmap: add address mapping for Jiri Kosina Since I switched the MAINTAINERS entry to @kernel.org some time ago, let's canonicalize my addressess to it. Signed-off-by: Jiri Kosina Signed-off-by: Jiri Kosina --- .mailmap | 3 +++ 1 file changed, 3 insertions(+) diff --git a/.mailmap b/.mailmap index 2643b7203a74..2a9db44a6924 100644 --- a/.mailmap +++ b/.mailmap @@ -263,6 +263,9 @@ Jens Osterkamp Jernej Skrabec Jessica Zhang Jilai Wang +Jiri Kosina +Jiri Kosina +Jiri Kosina Jiri Pirko Jiri Pirko Jiri Pirko -- cgit v1.2.3 From e62adaeecdc6a1e8ae86e7f3f9f8223a3ede94f5 Mon Sep 17 00:00:00 2001 From: Douglas Anderson Date: Wed, 29 Nov 2023 13:25:20 -0800 Subject: r8152: Hold the rtnl_lock for all of reset As of commit d9962b0d4202 ("r8152: Block future register access if register access fails") there is a race condition that can happen between the USB device reset thread and napi_enable() (not) getting called during rtl8152_open(). Specifically: * While rtl8152_open() is running we get a register access error that's _not_ -ENODEV and queue up a USB reset. * rtl8152_open() exits before calling napi_enable() due to any reason (including usb_submit_urb() returning an error). In that case: * Since the USB reset is perform in a separate thread asynchronously, it can run at anytime USB device lock is not held - even before rtl8152_open() has exited with an error and caused __dev_open() to clear the __LINK_STATE_START bit. * The rtl8152_pre_reset() will notice that the netif_running() returns true (since __LINK_STATE_START wasn't cleared) so it won't exit early. * rtl8152_pre_reset() will then hang in napi_disable() because napi_enable() was never called. We can fix the race by making sure that the r8152 reset routines don't run at the same time as we're opening the device. Specifically we need the reset routines in their entirety rely on the return value of netif_running(). The only way to reliably depend on that is for them to hold the rntl_lock() mutex for the duration of reset. Grabbing the rntl_lock() mutex for the duration of reset seems like a long time, but reset is not expected to be common and the rtnl_lock() mutex is already held for long durations since the core grabs it around the open/close calls. Fixes: d9962b0d4202 ("r8152: Block future register access if register access fails") Reviewed-by: Grant Grundler Signed-off-by: Douglas Anderson Signed-off-by: David S. Miller --- drivers/net/usb/r8152.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c index 2c5c1e91ded6..d6edf0254599 100644 --- a/drivers/net/usb/r8152.c +++ b/drivers/net/usb/r8152.c @@ -8397,6 +8397,8 @@ static int rtl8152_pre_reset(struct usb_interface *intf) struct r8152 *tp = usb_get_intfdata(intf); struct net_device *netdev; + rtnl_lock(); + if (!tp || !test_bit(PROBED_WITH_NO_ERRORS, &tp->flags)) return 0; @@ -8428,20 +8430,17 @@ static int rtl8152_post_reset(struct usb_interface *intf) struct sockaddr sa; if (!tp || !test_bit(PROBED_WITH_NO_ERRORS, &tp->flags)) - return 0; + goto exit; rtl_set_accessible(tp); /* reset the MAC address in case of policy change */ - if (determine_ethernet_addr(tp, &sa) >= 0) { - rtnl_lock(); + if (determine_ethernet_addr(tp, &sa) >= 0) dev_set_mac_address (tp->netdev, &sa, NULL); - rtnl_unlock(); - } netdev = tp->netdev; if (!netif_running(netdev)) - return 0; + goto exit; set_bit(WORK_ENABLE, &tp->flags); if (netif_carrier_ok(netdev)) { @@ -8460,6 +8459,8 @@ static int rtl8152_post_reset(struct usb_interface *intf) if (!list_empty(&tp->rx_done)) napi_schedule(&tp->napi); +exit: + rtnl_unlock(); return 0; } -- cgit v1.2.3 From 32a574c7e2685aa8138754d4d755f9246cc6bd48 Mon Sep 17 00:00:00 2001 From: Douglas Anderson Date: Wed, 29 Nov 2023 13:25:21 -0800 Subject: r8152: Add RTL8152_INACCESSIBLE checks to more loops Previous commits added checks for RTL8152_INACCESSIBLE in the loops in the driver. There are still a few more that keep tripping the driver up in error cases and make things take longer than they should. Add those in. All the loops that are part of this commit existed in some form or another since the r8152 driver was first introduced, though RTL8152_INACCESSIBLE was known as RTL8152_UNPLUG before commit 715f67f33af4 ("r8152: Rename RTL8152_UNPLUG to RTL8152_INACCESSIBLE") Fixes: ac718b69301c ("net/usb: new driver for RTL8152") Reviewed-by: Grant Grundler Signed-off-by: Douglas Anderson Acked-by: Hayes Wang Signed-off-by: David S. Miller --- drivers/net/usb/r8152.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c index d6edf0254599..e9955701f455 100644 --- a/drivers/net/usb/r8152.c +++ b/drivers/net/usb/r8152.c @@ -3000,6 +3000,8 @@ static void rtl8152_nic_reset(struct r8152 *tp) ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CR, CR_RST); for (i = 0; i < 1000; i++) { + if (test_bit(RTL8152_INACCESSIBLE, &tp->flags)) + break; if (!(ocp_read_byte(tp, MCU_TYPE_PLA, PLA_CR) & CR_RST)) break; usleep_range(100, 400); @@ -3329,6 +3331,8 @@ static void rtl_disable(struct r8152 *tp) rxdy_gated_en(tp, true); for (i = 0; i < 1000; i++) { + if (test_bit(RTL8152_INACCESSIBLE, &tp->flags)) + break; ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL); if ((ocp_data & FIFO_EMPTY) == FIFO_EMPTY) break; @@ -3336,6 +3340,8 @@ static void rtl_disable(struct r8152 *tp) } for (i = 0; i < 1000; i++) { + if (test_bit(RTL8152_INACCESSIBLE, &tp->flags)) + break; if (ocp_read_word(tp, MCU_TYPE_PLA, PLA_TCR0) & TCR0_TX_EMPTY) break; usleep_range(1000, 2000); @@ -5499,6 +5505,8 @@ static void wait_oob_link_list_ready(struct r8152 *tp) int i; for (i = 0; i < 1000; i++) { + if (test_bit(RTL8152_INACCESSIBLE, &tp->flags)) + break; ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL); if (ocp_data & LINK_LIST_READY) break; -- cgit v1.2.3 From 8a67b47fced9f6a84101eb9ec5ce4c7d64204bc7 Mon Sep 17 00:00:00 2001 From: Douglas Anderson Date: Wed, 29 Nov 2023 13:25:22 -0800 Subject: r8152: Add RTL8152_INACCESSIBLE to r8156b_wait_loading_flash() Delay loops in r8152 should break out if RTL8152_INACCESSIBLE is set so that they don't delay too long if the device becomes inaccessible. Add the break to the loop in r8156b_wait_loading_flash(). Fixes: 195aae321c82 ("r8152: support new chips") Reviewed-by: Grant Grundler Signed-off-by: Douglas Anderson Acked-by: Hayes Wang Signed-off-by: David S. Miller --- drivers/net/usb/r8152.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c index e9955701f455..c4dd81e2421f 100644 --- a/drivers/net/usb/r8152.c +++ b/drivers/net/usb/r8152.c @@ -5521,6 +5521,8 @@ static void r8156b_wait_loading_flash(struct r8152 *tp) int i; for (i = 0; i < 100; i++) { + if (test_bit(RTL8152_INACCESSIBLE, &tp->flags)) + break; if (ocp_read_word(tp, MCU_TYPE_USB, USB_GPHY_CTRL) & GPHY_PATCH_DONE) break; usleep_range(1000, 2000); -- cgit v1.2.3 From 8c53a7bd706535a9cf4e2ec3a4e8d61d46353ca0 Mon Sep 17 00:00:00 2001 From: Douglas Anderson Date: Wed, 29 Nov 2023 13:25:23 -0800 Subject: r8152: Add RTL8152_INACCESSIBLE to r8153_pre_firmware_1() Delay loops in r8152 should break out if RTL8152_INACCESSIBLE is set so that they don't delay too long if the device becomes inaccessible. Add the break to the loop in r8153_pre_firmware_1(). Fixes: 9370f2d05a2a ("r8152: support request_firmware for RTL8153") Reviewed-by: Grant Grundler Signed-off-by: Douglas Anderson Acked-by: Hayes Wang Signed-off-by: David S. Miller --- drivers/net/usb/r8152.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c index c4dd81e2421f..3958eb622d47 100644 --- a/drivers/net/usb/r8152.c +++ b/drivers/net/usb/r8152.c @@ -5645,6 +5645,8 @@ static int r8153_pre_firmware_1(struct r8152 *tp) for (i = 0; i < 104; i++) { u32 ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_WDT1_CTRL); + if (test_bit(RTL8152_INACCESSIBLE, &tp->flags)) + return -ENODEV; if (!(ocp_data & WTD1_EN)) break; usleep_range(1000, 2000); -- cgit v1.2.3 From 79321a793945fdbff2f405f84712d0ab81bed287 Mon Sep 17 00:00:00 2001 From: Douglas Anderson Date: Wed, 29 Nov 2023 13:25:24 -0800 Subject: r8152: Add RTL8152_INACCESSIBLE to r8153_aldps_en() Delay loops in r8152 should break out if RTL8152_INACCESSIBLE is set so that they don't delay too long if the device becomes inaccessible. Add the break to the loop in r8153_aldps_en(). Fixes: 4214cc550bf9 ("r8152: check if disabling ALDPS is finished") Reviewed-by: Grant Grundler Signed-off-by: Douglas Anderson Acked-by: Hayes Wang Signed-off-by: David S. Miller --- drivers/net/usb/r8152.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c index 3958eb622d47..fcdc9ba0f826 100644 --- a/drivers/net/usb/r8152.c +++ b/drivers/net/usb/r8152.c @@ -5803,6 +5803,8 @@ static void r8153_aldps_en(struct r8152 *tp, bool enable) data &= ~EN_ALDPS; ocp_reg_write(tp, OCP_POWER_CFG, data); for (i = 0; i < 20; i++) { + if (test_bit(RTL8152_INACCESSIBLE, &tp->flags)) + return; usleep_range(1000, 2000); if (ocp_read_word(tp, MCU_TYPE_PLA, 0xe000) & 0x0100) break; -- cgit v1.2.3 From 8e3c98d9187e09274fc000a7d1a77b070a42d259 Mon Sep 17 00:00:00 2001 From: Sudeep Holla Date: Thu, 30 Nov 2023 20:43:42 +0000 Subject: firmware: arm_scmi: Fix frequency truncation by promoting multiplier type Fix the possible frequency truncation for all values equal to or greater 4GHz on 64bit machines by updating the multiplier 'mult_factor' to 'unsigned long' type. It is also possible that the multiplier itself can be greater than or equal to 2^32. So we need to also fix the equation computing the value of the multiplier. Fixes: a9e3fbfaa0ff ("firmware: arm_scmi: add initial support for performance protocol") Reported-by: Sibi Sankar Closes: https://lore.kernel.org/all/20231129065748.19871-3-quic_sibis@quicinc.com/ Cc: Cristian Marussi Link: https://lore.kernel.org/r/20231130204343.503076-1-sudeep.holla@arm.com Signed-off-by: Sudeep Holla --- drivers/firmware/arm_scmi/perf.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/firmware/arm_scmi/perf.c b/drivers/firmware/arm_scmi/perf.c index c2435be0ae1b..f98791274495 100644 --- a/drivers/firmware/arm_scmi/perf.c +++ b/drivers/firmware/arm_scmi/perf.c @@ -152,7 +152,7 @@ struct perf_dom_info { u32 opp_count; u32 sustained_freq_khz; u32 sustained_perf_level; - u32 mult_factor; + unsigned long mult_factor; struct scmi_perf_domain_info info; struct scmi_opp opp[MAX_OPPS]; struct scmi_fc_info *fc_info; @@ -273,8 +273,8 @@ scmi_perf_domain_attributes_get(const struct scmi_protocol_handle *ph, dom_info->mult_factor = 1000; else dom_info->mult_factor = - (dom_info->sustained_freq_khz * 1000) / - dom_info->sustained_perf_level; + (dom_info->sustained_freq_khz * 1000UL) + / dom_info->sustained_perf_level; strscpy(dom_info->info.name, attr->name, SCMI_SHORT_NAME_MAX_SIZE); } -- cgit v1.2.3 From 77f5032e94f244ba08db51e17ca8f37bd7ff9acb Mon Sep 17 00:00:00 2001 From: Sudeep Holla Date: Thu, 30 Nov 2023 20:43:43 +0000 Subject: firmware: arm_scmi: Fix possible frequency truncation when using level indexing mode The multiplier is already promoted to unsigned long, however the frequency calculations done when using level indexing mode doesn't use the multiplier computed. It instead hardcodes the multiplier value of 1000 at all the usage sites. Clean that up by assigning the multiplier value of 1000 when using the perf level indexing mode and update the frequency calculations to use the multiplier instead. It should fix the possible frequency truncation for all the values greater than or equal to 4GHz on 64-bit machines. Fixes: 31c7c1397a33 ("firmware: arm_scmi: Add v3.2 perf level indexing mode support") Reported-by: Sibi Sankar Closes: https://lore.kernel.org/all/20231129065748.19871-3-quic_sibis@quicinc.com/ Cc: Cristian Marussi Link: https://lore.kernel.org/r/20231130204343.503076-2-sudeep.holla@arm.com Reviewed-by: Cristian Marussi Signed-off-by: Sudeep Holla --- drivers/firmware/arm_scmi/perf.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) diff --git a/drivers/firmware/arm_scmi/perf.c b/drivers/firmware/arm_scmi/perf.c index f98791274495..e11555de99ab 100644 --- a/drivers/firmware/arm_scmi/perf.c +++ b/drivers/firmware/arm_scmi/perf.c @@ -268,7 +268,8 @@ scmi_perf_domain_attributes_get(const struct scmi_protocol_handle *ph, dom_info->sustained_perf_level = le32_to_cpu(attr->sustained_perf_level); if (!dom_info->sustained_freq_khz || - !dom_info->sustained_perf_level) + !dom_info->sustained_perf_level || + dom_info->level_indexing_mode) /* CPUFreq converts to kHz, hence default 1000 */ dom_info->mult_factor = 1000; else @@ -798,7 +799,7 @@ static int scmi_dvfs_device_opps_add(const struct scmi_protocol_handle *ph, if (!dom->level_indexing_mode) freq = dom->opp[idx].perf * dom->mult_factor; else - freq = dom->opp[idx].indicative_freq * 1000; + freq = dom->opp[idx].indicative_freq * dom->mult_factor; data.level = dom->opp[idx].perf; data.freq = freq; @@ -845,7 +846,8 @@ static int scmi_dvfs_freq_set(const struct scmi_protocol_handle *ph, u32 domain, } else { struct scmi_opp *opp; - opp = LOOKUP_BY_FREQ(dom->opps_by_freq, freq / 1000); + opp = LOOKUP_BY_FREQ(dom->opps_by_freq, + freq / dom->mult_factor); if (!opp) return -EIO; @@ -879,7 +881,7 @@ static int scmi_dvfs_freq_get(const struct scmi_protocol_handle *ph, u32 domain, if (!opp) return -EIO; - *freq = opp->indicative_freq * 1000; + *freq = opp->indicative_freq * dom->mult_factor; } return ret; @@ -902,7 +904,7 @@ static int scmi_dvfs_est_power_get(const struct scmi_protocol_handle *ph, if (!dom->level_indexing_mode) opp_freq = opp->perf * dom->mult_factor; else - opp_freq = opp->indicative_freq * 1000; + opp_freq = opp->indicative_freq * dom->mult_factor; if (opp_freq < *freq) continue; -- cgit v1.2.3 From fea88064445a59584460f7f67d102b6e5fc1ca1d Mon Sep 17 00:00:00 2001 From: Matthias Reichl Date: Sun, 3 Dec 2023 23:22:16 +0100 Subject: regmap: fix bogus error on regcache_sync success Since commit 0ec7731655de ("regmap: Ensure range selector registers are updated after cache sync") opening pcm512x based soundcards fail with EINVAL and dmesg shows sync cache and pm_runtime_get errors: [ 228.794676] pcm512x 1-004c: Failed to sync cache: -22 [ 228.794740] pcm512x 1-004c: ASoC: error at snd_soc_pcm_component_pm_runtime_get on pcm512x.1-004c: -22 This is caused by the cache check result leaking out into the regcache_sync return value. Fix this by making the check local-only, as the comment above the regcache_read call states a non-zero return value means there's nothing to do so the return value should not be altered. Fixes: 0ec7731655de ("regmap: Ensure range selector registers are updated after cache sync") Cc: stable@vger.kernel.org Signed-off-by: Matthias Reichl Link: https://lore.kernel.org/r/20231203222216.96547-1-hias@horus.com Signed-off-by: Mark Brown --- drivers/base/regmap/regcache.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/base/regmap/regcache.c b/drivers/base/regmap/regcache.c index 92592f944a3d..ac63a73ccdaa 100644 --- a/drivers/base/regmap/regcache.c +++ b/drivers/base/regmap/regcache.c @@ -410,8 +410,7 @@ out: rb_entry(node, struct regmap_range_node, node); /* If there's nothing in the cache there's nothing to sync */ - ret = regcache_read(map, this->selector_reg, &i); - if (ret != 0) + if (regcache_read(map, this->selector_reg, &i) != 0) continue; ret = _regmap_write(map, this->selector_reg, i); -- cgit v1.2.3 From d4eef75279f5e9d594f5785502038c763ce42268 Mon Sep 17 00:00:00 2001 From: David Thompson Date: Thu, 30 Nov 2023 13:35:15 -0500 Subject: mlxbf-bootctl: correctly identify secure boot with development keys MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The secure boot state of the BlueField SoC is represented by two bits: 0 = production state 1 = secure boot enabled 2 = non-secure (secure boot disabled) 3 = RMA state There is also a single bit to indicate whether production keys or development keys are being used when secure boot is enabled. This single bit (specified by MLXBF_BOOTCTL_SB_DEV_MASK) only has meaning if secure boot state equals 1 (secure boot enabled). The secure boot states are as follows: - “GA secured” is when secure boot is enabled with official production keys. - “Secured (development)” is when secure boot is enabled with development keys. Without this fix “GA Secured” is displayed on development cards which is misleading. This patch updates the logic in "lifecycle_state_show()" to handle the case where the SoC is configured for secure boot and is using development keys. Fixes: 79e29cb8fbc5c ("platform/mellanox: Add bootctl driver for Mellanox BlueField Soc") Reviewed-by: Khalil Blaiech Signed-off-by: David Thompson Link: https://lore.kernel.org/r/20231130183515.17214-1-davthompson@nvidia.com Reviewed-by: Ilpo Järvinen Signed-off-by: Ilpo Järvinen --- drivers/platform/mellanox/mlxbf-bootctl.c | 39 ++++++++++++++++++++----------- 1 file changed, 26 insertions(+), 13 deletions(-) diff --git a/drivers/platform/mellanox/mlxbf-bootctl.c b/drivers/platform/mellanox/mlxbf-bootctl.c index 1ac7dab22c63..c1aef3a8fb2d 100644 --- a/drivers/platform/mellanox/mlxbf-bootctl.c +++ b/drivers/platform/mellanox/mlxbf-bootctl.c @@ -20,6 +20,7 @@ #define MLXBF_BOOTCTL_SB_SECURE_MASK 0x03 #define MLXBF_BOOTCTL_SB_TEST_MASK 0x0c +#define MLXBF_BOOTCTL_SB_DEV_MASK BIT(4) #define MLXBF_SB_KEY_NUM 4 @@ -40,11 +41,18 @@ static struct mlxbf_bootctl_name boot_names[] = { { MLXBF_BOOTCTL_NONE, "none" }, }; +enum { + MLXBF_BOOTCTL_SB_LIFECYCLE_PRODUCTION = 0, + MLXBF_BOOTCTL_SB_LIFECYCLE_GA_SECURE = 1, + MLXBF_BOOTCTL_SB_LIFECYCLE_GA_NON_SECURE = 2, + MLXBF_BOOTCTL_SB_LIFECYCLE_RMA = 3 +}; + static const char * const mlxbf_bootctl_lifecycle_states[] = { - [0] = "Production", - [1] = "GA Secured", - [2] = "GA Non-Secured", - [3] = "RMA", + [MLXBF_BOOTCTL_SB_LIFECYCLE_PRODUCTION] = "Production", + [MLXBF_BOOTCTL_SB_LIFECYCLE_GA_SECURE] = "GA Secured", + [MLXBF_BOOTCTL_SB_LIFECYCLE_GA_NON_SECURE] = "GA Non-Secured", + [MLXBF_BOOTCTL_SB_LIFECYCLE_RMA] = "RMA", }; /* Log header format. */ @@ -247,25 +255,30 @@ static ssize_t second_reset_action_store(struct device *dev, static ssize_t lifecycle_state_show(struct device *dev, struct device_attribute *attr, char *buf) { + int status_bits; + int use_dev_key; + int test_state; int lc_state; - lc_state = mlxbf_bootctl_smc(MLXBF_BOOTCTL_GET_TBB_FUSE_STATUS, - MLXBF_BOOTCTL_FUSE_STATUS_LIFECYCLE); - if (lc_state < 0) - return lc_state; + status_bits = mlxbf_bootctl_smc(MLXBF_BOOTCTL_GET_TBB_FUSE_STATUS, + MLXBF_BOOTCTL_FUSE_STATUS_LIFECYCLE); + if (status_bits < 0) + return status_bits; - lc_state &= - MLXBF_BOOTCTL_SB_TEST_MASK | MLXBF_BOOTCTL_SB_SECURE_MASK; + use_dev_key = status_bits & MLXBF_BOOTCTL_SB_DEV_MASK; + test_state = status_bits & MLXBF_BOOTCTL_SB_TEST_MASK; + lc_state = status_bits & MLXBF_BOOTCTL_SB_SECURE_MASK; /* * If the test bits are set, we specify that the current state may be * due to using the test bits. */ - if (lc_state & MLXBF_BOOTCTL_SB_TEST_MASK) { - lc_state &= MLXBF_BOOTCTL_SB_SECURE_MASK; - + if (test_state) { return sprintf(buf, "%s(test)\n", mlxbf_bootctl_lifecycle_states[lc_state]); + } else if (use_dev_key && + (lc_state == MLXBF_BOOTCTL_SB_LIFECYCLE_GA_SECURE)) { + return sprintf(buf, "Secured (development)\n"); } return sprintf(buf, "%s\n", mlxbf_bootctl_lifecycle_states[lc_state]); -- cgit v1.2.3 From b5338b1b901e41bd7cead66a0b3a796e9fa95684 Mon Sep 17 00:00:00 2001 From: Marian Postevca Date: Sun, 3 Dec 2023 00:29:51 +0200 Subject: ASoC: amd: acp: Add support for a new Huawei Matebook laptop This commit adds support for Huawei MateBook D16 2021 with Ryzen 4600H in driver acp3x-es83xx. Signed-off-by: Marian Postevca Link: https://lore.kernel.org/r/20231202223001.8025-1-posteuca@mutex.one Signed-off-by: Mark Brown --- sound/soc/amd/acp-config.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/sound/soc/amd/acp-config.c b/sound/soc/amd/acp-config.c index 20cee7104c2b..3bc4b2e41650 100644 --- a/sound/soc/amd/acp-config.c +++ b/sound/soc/amd/acp-config.c @@ -103,6 +103,20 @@ static const struct config_entry config_table[] = { {} }, }, + { + .flags = FLAG_AMD_LEGACY, + .device = ACP_PCI_DEV_ID, + .dmi_table = (const struct dmi_system_id []) { + { + .matches = { + DMI_EXACT_MATCH(DMI_BOARD_VENDOR, "HUAWEI"), + DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "HVY-WXX9"), + DMI_EXACT_MATCH(DMI_PRODUCT_VERSION, "M1010"), + }, + }, + {} + }, + }, { .flags = FLAG_AMD_LEGACY, .device = ACP_PCI_DEV_ID, -- cgit v1.2.3 From 5f44de697383fcc9a9a1a78f99e09d1838704b90 Mon Sep 17 00:00:00 2001 From: David Rau Date: Fri, 1 Dec 2023 12:29:33 +0800 Subject: ASoC: da7219: Support low DC impedance headset Change the default MIC detection impedance threshold to 200ohm to support low mic DC impedance headset. Signed-off-by: David Rau Link: https://lore.kernel.org/r/20231201042933.26392-1-David.Rau.opensource@dm.renesas.com Signed-off-by: Mark Brown --- sound/soc/codecs/da7219-aad.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/codecs/da7219-aad.c b/sound/soc/codecs/da7219-aad.c index 4c4405942779..6bc068cdcbe2 100644 --- a/sound/soc/codecs/da7219-aad.c +++ b/sound/soc/codecs/da7219-aad.c @@ -696,7 +696,7 @@ static struct da7219_aad_pdata *da7219_aad_fw_to_pdata(struct device *dev) aad_pdata->mic_det_thr = da7219_aad_fw_mic_det_thr(dev, fw_val32); else - aad_pdata->mic_det_thr = DA7219_AAD_MIC_DET_THR_500_OHMS; + aad_pdata->mic_det_thr = DA7219_AAD_MIC_DET_THR_200_OHMS; if (fwnode_property_read_u32(aad_np, "dlg,jack-ins-deb", &fw_val32) >= 0) aad_pdata->jack_ins_deb = -- cgit v1.2.3 From 29046a78a3c0a1f8fa0427f164caa222f003cf5b Mon Sep 17 00:00:00 2001 From: Dinghao Liu Date: Mon, 4 Dec 2023 15:41:56 +0800 Subject: ASoC: wm_adsp: fix memleak in wm_adsp_buffer_populate When wm_adsp_buffer_read() fails, we should free buf->regions. Otherwise, the callers of wm_adsp_buffer_populate() will directly free buf on failure, which makes buf->regions a leaked memory. Fixes: a792af69b08f ("ASoC: wm_adsp: Refactor compress stream initialisation") Signed-off-by: Dinghao Liu Reviewed-by: Richard Fitzgerald Link: https://lore.kernel.org/r/20231204074158.12026-1-dinghao.liu@zju.edu.cn Signed-off-by: Mark Brown --- sound/soc/codecs/wm_adsp.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/sound/soc/codecs/wm_adsp.c b/sound/soc/codecs/wm_adsp.c index 236b12b69ae5..c01e31175015 100644 --- a/sound/soc/codecs/wm_adsp.c +++ b/sound/soc/codecs/wm_adsp.c @@ -1451,12 +1451,12 @@ static int wm_adsp_buffer_populate(struct wm_adsp_compr_buf *buf) ret = wm_adsp_buffer_read(buf, caps->region_defs[i].base_offset, ®ion->base_addr); if (ret < 0) - return ret; + goto err; ret = wm_adsp_buffer_read(buf, caps->region_defs[i].size_offset, &offset); if (ret < 0) - return ret; + goto err; region->cumulative_size = offset; @@ -1467,6 +1467,10 @@ static int wm_adsp_buffer_populate(struct wm_adsp_compr_buf *buf) } return 0; + +err: + kfree(buf->regions); + return ret; } static void wm_adsp_buffer_clear(struct wm_adsp_compr_buf *buf) -- cgit v1.2.3 From 2c7c857f5fed997be93047d2de853d7f10c8defe Mon Sep 17 00:00:00 2001 From: Kunwu Chan Date: Fri, 1 Dec 2023 13:54:47 +0800 Subject: platform/mellanox: Add null pointer checks for devm_kasprintf() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit devm_kasprintf() returns a pointer to dynamically allocated memory which can be NULL upon failure. Compile-tested only. Fixes: 1a218d312e65 ("platform/mellanox: mlxbf-pmc: Add Mellanox BlueField PMC driver") Suggested-by: Ilpo Järvinen Suggested-by: Vadim Pasternak Signed-off-by: Kunwu Chan Reviewed-by: Vadim Pasternak Link: https://lore.kernel.org/r/20231201055447.2356001-1-chentao@kylinos.cn [ij: split the change into two] Reviewed-by: Ilpo Järvinen Signed-off-by: Ilpo Järvinen --- drivers/platform/mellanox/mlxbf-pmc.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/drivers/platform/mellanox/mlxbf-pmc.c b/drivers/platform/mellanox/mlxbf-pmc.c index 0b427fc24a96..d0d1cfc55c5f 100644 --- a/drivers/platform/mellanox/mlxbf-pmc.c +++ b/drivers/platform/mellanox/mlxbf-pmc.c @@ -1771,6 +1771,8 @@ static int mlxbf_pmc_init_perftype_counter(struct device *dev, int blk_num) attr->dev_attr.show = mlxbf_pmc_event_list_show; attr->nr = blk_num; attr->dev_attr.attr.name = devm_kasprintf(dev, GFP_KERNEL, "event_list"); + if (!attr->dev_attr.attr.name) + return -ENOMEM; pmc->block[blk_num].block_attr[i] = &attr->dev_attr.attr; attr = NULL; @@ -1784,6 +1786,8 @@ static int mlxbf_pmc_init_perftype_counter(struct device *dev, int blk_num) attr->nr = blk_num; attr->dev_attr.attr.name = devm_kasprintf(dev, GFP_KERNEL, "enable"); + if (!attr->dev_attr.attr.name) + return -ENOMEM; pmc->block[blk_num].block_attr[++i] = &attr->dev_attr.attr; attr = NULL; } @@ -1810,6 +1814,8 @@ static int mlxbf_pmc_init_perftype_counter(struct device *dev, int blk_num) attr->nr = blk_num; attr->dev_attr.attr.name = devm_kasprintf(dev, GFP_KERNEL, "counter%d", j); + if (!attr->dev_attr.attr.name) + return -ENOMEM; pmc->block[blk_num].block_attr[++i] = &attr->dev_attr.attr; attr = NULL; @@ -1821,6 +1827,8 @@ static int mlxbf_pmc_init_perftype_counter(struct device *dev, int blk_num) attr->nr = blk_num; attr->dev_attr.attr.name = devm_kasprintf(dev, GFP_KERNEL, "event%d", j); + if (!attr->dev_attr.attr.name) + return -ENOMEM; pmc->block[blk_num].block_attr[++i] = &attr->dev_attr.attr; attr = NULL; } @@ -1853,6 +1861,8 @@ static int mlxbf_pmc_init_perftype_reg(struct device *dev, int blk_num) attr->nr = blk_num; attr->dev_attr.attr.name = devm_kasprintf(dev, GFP_KERNEL, events[j].evt_name); + if (!attr->dev_attr.attr.name) + return -ENOMEM; pmc->block[blk_num].block_attr[i] = &attr->dev_attr.attr; attr = NULL; i++; @@ -1882,6 +1892,8 @@ static int mlxbf_pmc_create_groups(struct device *dev, int blk_num) pmc->block[blk_num].block_attr_grp.attrs = pmc->block[blk_num].block_attr; pmc->block[blk_num].block_attr_grp.name = devm_kasprintf( dev, GFP_KERNEL, pmc->block_name[blk_num]); + if (!pmc->block[blk_num].block_attr_grp.name) + return -ENOMEM; pmc->groups[pmc->group_num] = &pmc->block[blk_num].block_attr_grp; pmc->group_num++; -- cgit v1.2.3 From 3494a594315b56516988afb6854d75dee5b501db Mon Sep 17 00:00:00 2001 From: Kunwu Chan Date: Fri, 1 Dec 2023 13:54:47 +0800 Subject: platform/mellanox: Check devm_hwmon_device_register_with_groups() return value MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit devm_hwmon_device_register_with_groups() returns an error pointer upon failure. Check its return value for errors. Compile-tested only. Fixes: 1a218d312e65 ("platform/mellanox: mlxbf-pmc: Add Mellanox BlueField PMC driver") Suggested-by: Ilpo Järvinen Suggested-by: Vadim Pasternak Signed-off-by: Kunwu Chan Reviewed-by: Vadim Pasternak Link: https://lore.kernel.org/r/20231201055447.2356001-1-chentao@kylinos.cn [ij: split the change into two] Reviewed-by: Ilpo Järvinen Signed-off-by: Ilpo Järvinen --- drivers/platform/mellanox/mlxbf-pmc.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/platform/mellanox/mlxbf-pmc.c b/drivers/platform/mellanox/mlxbf-pmc.c index d0d1cfc55c5f..1dd84c7a79de 100644 --- a/drivers/platform/mellanox/mlxbf-pmc.c +++ b/drivers/platform/mellanox/mlxbf-pmc.c @@ -2075,6 +2075,8 @@ static int mlxbf_pmc_probe(struct platform_device *pdev) pmc->hwmon_dev = devm_hwmon_device_register_with_groups( dev, "bfperf", pmc, pmc->groups); + if (IS_ERR(pmc->hwmon_dev)) + return PTR_ERR(pmc->hwmon_dev); platform_set_drvdata(pdev, pmc); return 0; -- cgit v1.2.3 From 73ea73affe8622bdf292de898da869d441da6a9d Mon Sep 17 00:00:00 2001 From: Roy Luo Date: Tue, 28 Nov 2023 22:17:56 +0000 Subject: USB: gadget: core: adjust uevent timing on gadget unbind The KOBJ_CHANGE uevent is sent before gadget unbind is actually executed, resulting in inaccurate uevent emitted at incorrect timing (the uevent would have USB_UDC_DRIVER variable set while it would soon be removed). Move the KOBJ_CHANGE uevent to the end of the unbind function so that uevent is sent only after the change has been made. Fixes: 2ccea03a8f7e ("usb: gadget: introduce UDC Class") Cc: stable@vger.kernel.org Signed-off-by: Roy Luo Link: https://lore.kernel.org/r/20231128221756.2591158-1-royluo@google.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/udc/core.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/usb/gadget/udc/core.c b/drivers/usb/gadget/udc/core.c index ded9531f141b..d59f94464b87 100644 --- a/drivers/usb/gadget/udc/core.c +++ b/drivers/usb/gadget/udc/core.c @@ -1646,8 +1646,6 @@ static void gadget_unbind_driver(struct device *dev) dev_dbg(&udc->dev, "unbinding gadget driver [%s]\n", driver->function); - kobject_uevent(&udc->dev.kobj, KOBJ_CHANGE); - udc->allow_connect = false; cancel_work_sync(&udc->vbus_work); mutex_lock(&udc->connect_lock); @@ -1667,6 +1665,8 @@ static void gadget_unbind_driver(struct device *dev) driver->is_bound = false; udc->driver = NULL; mutex_unlock(&udc_lock); + + kobject_uevent(&udc->dev.kobj, KOBJ_CHANGE); } /* ------------------------------------------------------------------------- */ -- cgit v1.2.3 From b17b7fe6dd5c6ff74b38b0758ca799cdbb79e26e Mon Sep 17 00:00:00 2001 From: RD Babiera Date: Wed, 29 Nov 2023 19:23:50 +0000 Subject: usb: typec: class: fix typec_altmode_put_partner to put plugs When typec_altmode_put_partner is called by a plug altmode upon release, the port altmode the plug belongs to will not remove its reference to the plug. The check to see if the altmode being released evaluates against the released altmode's partner instead of the calling altmode itself, so change adev in typec_altmode_put_partner to properly refer to the altmode being released. typec_altmode_set_partner is not run for port altmodes, so also add a check in typec_altmode_release to prevent typec_altmode_put_partner() calls on port altmode release. Fixes: 8a37d87d72f0 ("usb: typec: Bus type for alternate modes") Cc: stable@vger.kernel.org Signed-off-by: RD Babiera Reviewed-by: Heikki Krogerus Link: https://lore.kernel.org/r/20231129192349.1773623-2-rdbabiera@google.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/typec/class.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/usb/typec/class.c b/drivers/usb/typec/class.c index 2e0451bd336e..16a670828dde 100644 --- a/drivers/usb/typec/class.c +++ b/drivers/usb/typec/class.c @@ -267,7 +267,7 @@ static void typec_altmode_put_partner(struct altmode *altmode) if (!partner) return; - adev = &partner->adev; + adev = &altmode->adev; if (is_typec_plug(adev->dev.parent)) { struct typec_plug *plug = to_typec_plug(adev->dev.parent); @@ -497,7 +497,8 @@ static void typec_altmode_release(struct device *dev) { struct altmode *alt = to_altmode(to_typec_altmode(dev)); - typec_altmode_put_partner(alt); + if (!is_typec_port(dev->parent)) + typec_altmode_put_partner(alt); altmode_id_remove(alt->adev.dev.parent, alt->id); kfree(alt); -- cgit v1.2.3 From bbb8e71965c3737bdc691afd803a34bfd61cfbeb Mon Sep 17 00:00:00 2001 From: Sarah Grant Date: Fri, 1 Dec 2023 18:16:54 +0000 Subject: ALSA: usb-audio: Add Pioneer DJM-450 mixer controls These values mirror those of the Pioneer DJM-250MK2 as the channel layout appears identical based on my observations. This duplication could be removed in later contributions if desired. Signed-off-by: Sarah Grant Cc: Link: https://lore.kernel.org/r/20231201181654.5058-1-s@srd.tw Signed-off-by: Takashi Iwai --- sound/usb/mixer_quirks.c | 30 ++++++++++++++++++++++++++++++ 1 file changed, 30 insertions(+) diff --git a/sound/usb/mixer_quirks.c b/sound/usb/mixer_quirks.c index 898bc3baca7b..c8d48566e175 100644 --- a/sound/usb/mixer_quirks.c +++ b/sound/usb/mixer_quirks.c @@ -2978,6 +2978,7 @@ static int snd_bbfpro_controls_create(struct usb_mixer_interface *mixer) #define SND_DJM_850_IDX 0x2 #define SND_DJM_900NXS2_IDX 0x3 #define SND_DJM_750MK2_IDX 0x4 +#define SND_DJM_450_IDX 0x5 #define SND_DJM_CTL(_name, suffix, _default_value, _windex) { \ @@ -3108,6 +3109,31 @@ static const struct snd_djm_ctl snd_djm_ctls_250mk2[] = { }; +// DJM-450 +static const u16 snd_djm_opts_450_cap1[] = { + 0x0103, 0x0100, 0x0106, 0x0107, 0x0108, 0x0109, 0x010d, 0x010a }; + +static const u16 snd_djm_opts_450_cap2[] = { + 0x0203, 0x0200, 0x0206, 0x0207, 0x0208, 0x0209, 0x020d, 0x020a }; + +static const u16 snd_djm_opts_450_cap3[] = { + 0x030a, 0x0311, 0x0312, 0x0307, 0x0308, 0x0309, 0x030d }; + +static const u16 snd_djm_opts_450_pb1[] = { 0x0100, 0x0101, 0x0104 }; +static const u16 snd_djm_opts_450_pb2[] = { 0x0200, 0x0201, 0x0204 }; +static const u16 snd_djm_opts_450_pb3[] = { 0x0300, 0x0301, 0x0304 }; + +static const struct snd_djm_ctl snd_djm_ctls_450[] = { + SND_DJM_CTL("Capture Level", cap_level, 0, SND_DJM_WINDEX_CAPLVL), + SND_DJM_CTL("Ch1 Input", 450_cap1, 2, SND_DJM_WINDEX_CAP), + SND_DJM_CTL("Ch2 Input", 450_cap2, 2, SND_DJM_WINDEX_CAP), + SND_DJM_CTL("Ch3 Input", 450_cap3, 0, SND_DJM_WINDEX_CAP), + SND_DJM_CTL("Ch1 Output", 450_pb1, 0, SND_DJM_WINDEX_PB), + SND_DJM_CTL("Ch2 Output", 450_pb2, 1, SND_DJM_WINDEX_PB), + SND_DJM_CTL("Ch3 Output", 450_pb3, 2, SND_DJM_WINDEX_PB) +}; + + // DJM-750 static const u16 snd_djm_opts_750_cap1[] = { 0x0101, 0x0103, 0x0106, 0x0107, 0x0108, 0x0109, 0x010a, 0x010f }; @@ -3203,6 +3229,7 @@ static const struct snd_djm_device snd_djm_devices[] = { [SND_DJM_850_IDX] = SND_DJM_DEVICE(850), [SND_DJM_900NXS2_IDX] = SND_DJM_DEVICE(900nxs2), [SND_DJM_750MK2_IDX] = SND_DJM_DEVICE(750mk2), + [SND_DJM_450_IDX] = SND_DJM_DEVICE(450), }; @@ -3454,6 +3481,9 @@ int snd_usb_mixer_apply_create_quirk(struct usb_mixer_interface *mixer) case USB_ID(0x2b73, 0x0017): /* Pioneer DJ DJM-250MK2 */ err = snd_djm_controls_create(mixer, SND_DJM_250MK2_IDX); break; + case USB_ID(0x2b73, 0x0013): /* Pioneer DJ DJM-450 */ + err = snd_djm_controls_create(mixer, SND_DJM_450_IDX); + break; case USB_ID(0x08e4, 0x017f): /* Pioneer DJ DJM-750 */ err = snd_djm_controls_create(mixer, SND_DJM_750_IDX); break; -- cgit v1.2.3 From cd14dedf15be432066e63783c63d650f2800cd48 Mon Sep 17 00:00:00 2001 From: Aleksandrs Vinarskis Date: Mon, 4 Dec 2023 00:30:06 +0100 Subject: ALSA: hda/realtek: fix speakers on XPS 9530 (2023) XPS 9530 has 2 tweeters and 2 subwoofers powered by CS35L41 amplifier, SPI connected. For subwoofers to work, it requires both to enable amplifier support, and to enable output to subwoofers via 0x17 quirk (similalry to XPS 9510/9520). Signed-off-by: Aleksandrs Vinarskis Cc: Link: https://lore.kernel.org/r/20231203233006.100558-1-alex.vinarskis@gmail.com Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index ddd74f5d3b30..1c85e6dcef6c 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -9705,6 +9705,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x1028, 0x0b1a, "Dell Precision 5570", ALC289_FIXUP_DUAL_SPK), SND_PCI_QUIRK(0x1028, 0x0b37, "Dell Inspiron 16 Plus 7620 2-in-1", ALC295_FIXUP_DELL_INSPIRON_TOP_SPEAKERS), SND_PCI_QUIRK(0x1028, 0x0b71, "Dell Inspiron 16 Plus 7620", ALC295_FIXUP_DELL_INSPIRON_TOP_SPEAKERS), + SND_PCI_QUIRK(0x1028, 0x0beb, "Dell XPS 15 9530 (2023)", ALC289_FIXUP_DELL_CS35L41_SPI_2), SND_PCI_QUIRK(0x1028, 0x0c03, "Dell Precision 5340", ALC269_FIXUP_DELL4_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x1028, 0x0c19, "Dell Precision 3340", ALC236_FIXUP_DELL_DUAL_CODECS), SND_PCI_QUIRK(0x1028, 0x0c1a, "Dell Precision 3340", ALC236_FIXUP_DELL_DUAL_CODECS), -- cgit v1.2.3 From 6f7e4664e597440dfbdb8b2931c561b717030d07 Mon Sep 17 00:00:00 2001 From: Bin Li Date: Mon, 4 Dec 2023 18:04:50 +0800 Subject: ALSA: hda/realtek: Enable headset on Lenovo M90 Gen5 Lenovo M90 Gen5 is equipped with ALC897, and it needs ALC897_FIXUP_HEADSET_MIC_PIN quirk to make its headset mic work. Signed-off-by: Bin Li Cc: Link: https://lore.kernel.org/r/20231204100450.642783-1-bin.li@canonical.com Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 1c85e6dcef6c..d799d0ad7623 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -12198,6 +12198,7 @@ static const struct snd_pci_quirk alc662_fixup_tbl[] = { SND_PCI_QUIRK(0x17aa, 0x32f7, "Lenovo ThinkCentre M90", ALC897_FIXUP_HEADSET_MIC_PIN), SND_PCI_QUIRK(0x17aa, 0x3321, "Lenovo ThinkCentre M70 Gen4", ALC897_FIXUP_HEADSET_MIC_PIN), SND_PCI_QUIRK(0x17aa, 0x331b, "Lenovo ThinkCentre M90 Gen4", ALC897_FIXUP_HEADSET_MIC_PIN), + SND_PCI_QUIRK(0x17aa, 0x3364, "Lenovo ThinkCentre M90 Gen5", ALC897_FIXUP_HEADSET_MIC_PIN), SND_PCI_QUIRK(0x17aa, 0x3742, "Lenovo TianYi510Pro-14IOB", ALC897_FIXUP_HEADSET_MIC_PIN2), SND_PCI_QUIRK(0x17aa, 0x38af, "Lenovo Ideapad Y550P", ALC662_FIXUP_IDEAPAD), SND_PCI_QUIRK(0x17aa, 0x3a0d, "Lenovo Ideapad Y550", ALC662_FIXUP_IDEAPAD), -- cgit v1.2.3 From a9f68ffe1170ca4bc17ab29067d806a354a026e0 Mon Sep 17 00:00:00 2001 From: Mario Limonciello Date: Sat, 2 Dec 2023 21:24:30 -0600 Subject: HID: i2c-hid: Add IDEA5002 to i2c_hid_acpi_blacklist[] Users have reported problems with recent Lenovo laptops that contain an IDEA5002 I2C HID device. Reports include fans turning on and running even at idle and spurious wakeups from suspend. Presumably in the Windows ecosystem there is an application that uses the HID device. Maybe that puts it into a lower power state so it doesn't cause spurious events. This device doesn't serve any functional purpose in Linux as nothing interacts with it so blacklist it from being probed. This will prevent the GPIO driver from setting up the GPIO and the spurious interrupts and wake events will not occur. Cc: stable@vger.kernel.org # 6.1 Reported-and-tested-by: Marcus Aram Reported-and-tested-by: Mark Herbert Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/2812 Signed-off-by: Mario Limonciello Signed-off-by: Jiri Kosina --- drivers/hid/i2c-hid/i2c-hid-acpi.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/hid/i2c-hid/i2c-hid-acpi.c b/drivers/hid/i2c-hid/i2c-hid-acpi.c index ac918a9ea8d3..1b49243adb16 100644 --- a/drivers/hid/i2c-hid/i2c-hid-acpi.c +++ b/drivers/hid/i2c-hid/i2c-hid-acpi.c @@ -40,6 +40,11 @@ static const struct acpi_device_id i2c_hid_acpi_blacklist[] = { * ICN8505 controller, has a _CID of PNP0C50 but is not HID compatible. */ { "CHPN0001" }, + /* + * The IDEA5002 ACPI device causes high interrupt usage and spurious + * wakeups from suspend. + */ + { "IDEA5002" }, { } }; -- cgit v1.2.3 From 31e52523267faab5ed8569b9d5c22c9a2283872f Mon Sep 17 00:00:00 2001 From: Sebastian Parschauer Date: Mon, 27 Nov 2023 23:49:37 +0100 Subject: HID: Add quirk for Labtec/ODDOR/aikeec handbrake This device needs ALWAYS_POLL quirk, otherwise it keeps reconnecting indefinitely. It is a handbrake for sim racing detected as joystick. Reported and tested by GitHub user N0th1ngM4tt3rs. Link: https://github.com/sriemer/fix-linux-mouse issue 22 Signed-off-by: Sebastian Parschauer Signed-off-by: Jiri Kosina --- drivers/hid/hid-ids.h | 1 + drivers/hid/hid-quirks.c | 1 + 2 files changed, 2 insertions(+) diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h index c6e4e0d1f214..72046039d1be 100644 --- a/drivers/hid/hid-ids.h +++ b/drivers/hid/hid-ids.h @@ -740,6 +740,7 @@ #define USB_VENDOR_ID_LABTEC 0x1020 #define USB_DEVICE_ID_LABTEC_WIRELESS_KEYBOARD 0x0006 +#define USB_DEVICE_ID_LABTEC_ODDOR_HANDBRAKE 0x8888 #define USB_VENDOR_ID_LAVIEW 0x22D4 #define USB_DEVICE_ID_GLORIOUS_MODEL_I 0x1503 diff --git a/drivers/hid/hid-quirks.c b/drivers/hid/hid-quirks.c index ea472923fab0..e0bbf0c6345d 100644 --- a/drivers/hid/hid-quirks.c +++ b/drivers/hid/hid-quirks.c @@ -121,6 +121,7 @@ static const struct hid_device_id hid_quirks[] = { { HID_USB_DEVICE(USB_VENDOR_ID_KYE, USB_DEVICE_ID_KYE_EASYPEN_M406XE), HID_QUIRK_MULTI_INPUT }, { HID_USB_DEVICE(USB_VENDOR_ID_KYE, USB_DEVICE_ID_KYE_MOUSEPEN_I608X_V2), HID_QUIRK_MULTI_INPUT }, { HID_USB_DEVICE(USB_VENDOR_ID_KYE, USB_DEVICE_ID_KYE_PENSKETCH_T609A), HID_QUIRK_MULTI_INPUT }, + { HID_USB_DEVICE(USB_VENDOR_ID_LABTEC, USB_DEVICE_ID_LABTEC_ODDOR_HANDBRAKE), HID_QUIRK_ALWAYS_POLL }, { HID_USB_DEVICE(USB_VENDOR_ID_LENOVO, USB_DEVICE_ID_LENOVO_OPTICAL_USB_MOUSE_600E), HID_QUIRK_ALWAYS_POLL }, { HID_USB_DEVICE(USB_VENDOR_ID_LENOVO, USB_DEVICE_ID_LENOVO_PIXART_USB_MOUSE_608D), HID_QUIRK_ALWAYS_POLL }, { HID_USB_DEVICE(USB_VENDOR_ID_LENOVO, USB_DEVICE_ID_LENOVO_PIXART_USB_MOUSE_6019), HID_QUIRK_ALWAYS_POLL }, -- cgit v1.2.3 From fb9ad24485087e0f00d84bee7a5914640b2b9024 Mon Sep 17 00:00:00 2001 From: Srinivas Kandagatla Date: Mon, 4 Dec 2023 12:47:35 +0000 Subject: ASoC: ops: add correct range check for limiting volume Volume can have ranges that start with negative values, ex: -84dB to +40dB. Apply correct range check in snd_soc_limit_volume before setting the platform_max. Without this patch, for example setting a 0dB limit on a volume range of -84dB to +40dB would fail. Signed-off-by: Srinivas Kandagatla Tested-by: Johan Hovold Reviewed-by: Johan Hovold Link: https://lore.kernel.org/r/20231204124736.132185-2-srinivas.kandagatla@linaro.org Signed-off-by: Mark Brown --- sound/soc/soc-ops.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/soc-ops.c b/sound/soc/soc-ops.c index 55b009d3c681..2d25748ca706 100644 --- a/sound/soc/soc-ops.c +++ b/sound/soc/soc-ops.c @@ -661,7 +661,7 @@ int snd_soc_limit_volume(struct snd_soc_card *card, kctl = snd_soc_card_get_kcontrol(card, name); if (kctl) { struct soc_mixer_control *mc = (struct soc_mixer_control *)kctl->private_value; - if (max <= mc->max) { + if (max <= mc->max - mc->min) { mc->platform_max = max; ret = 0; } -- cgit v1.2.3 From 716d4e5373e9d1ae993485ab2e3b893bf7104fb1 Mon Sep 17 00:00:00 2001 From: Srinivas Kandagatla Date: Mon, 4 Dec 2023 12:47:36 +0000 Subject: ASoC: qcom: sc8280xp: Limit speaker digital volumes Limit the speaker digital gains to 0dB so that the users will not damage them. Currently there is a limit in UCM, but this does not stop the user form changing the digital gains from command line. So limit this in driver which makes the speakers more safer without active speaker protection in place. Signed-off-by: Srinivas Kandagatla Reviewed-by: Johan Hovold Tested-by: Johan Hovold Link: https://lore.kernel.org/r/20231204124736.132185-3-srinivas.kandagatla@linaro.org Signed-off-by: Mark Brown --- sound/soc/qcom/sc8280xp.c | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) diff --git a/sound/soc/qcom/sc8280xp.c b/sound/soc/qcom/sc8280xp.c index d93b18f07be5..39cb0b889aff 100644 --- a/sound/soc/qcom/sc8280xp.c +++ b/sound/soc/qcom/sc8280xp.c @@ -27,6 +27,23 @@ struct sc8280xp_snd_data { static int sc8280xp_snd_init(struct snd_soc_pcm_runtime *rtd) { struct sc8280xp_snd_data *data = snd_soc_card_get_drvdata(rtd->card); + struct snd_soc_dai *cpu_dai = snd_soc_rtd_to_cpu(rtd, 0); + struct snd_soc_card *card = rtd->card; + + switch (cpu_dai->id) { + case WSA_CODEC_DMA_RX_0: + case WSA_CODEC_DMA_RX_1: + /* + * set limit of 0dB on Digital Volume for Speakers, + * this can prevent damage of speakers to some extent without + * active speaker protection + */ + snd_soc_limit_volume(card, "WSA_RX0 Digital Volume", 84); + snd_soc_limit_volume(card, "WSA_RX1 Digital Volume", 84); + break; + default: + break; + } return qcom_snd_wcd_jack_setup(rtd, &data->jack, &data->jack_setup); } -- cgit v1.2.3 From 5c687c287c46fadb14644091823298875a5216aa Mon Sep 17 00:00:00 2001 From: Keith Busch Date: Mon, 30 Oct 2023 08:13:09 -0700 Subject: nvme: introduce helper function to get ctrl state The controller state is typically written by another CPU, so reading it should ensure no optimizations are taken. This is a repeated pattern in the driver, so start with adding a convenience function that returns the controller state with READ_ONCE(). Reviewed-by: Sagi Grimberg Signed-off-by: Keith Busch --- drivers/nvme/host/nvme.h | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/nvme/host/nvme.h b/drivers/nvme/host/nvme.h index 39a90b7cb125..578e6d311bc9 100644 --- a/drivers/nvme/host/nvme.h +++ b/drivers/nvme/host/nvme.h @@ -387,6 +387,11 @@ struct nvme_ctrl { enum nvme_dctype dctype; }; +static inline enum nvme_ctrl_state nvme_ctrl_state(struct nvme_ctrl *ctrl) +{ + return READ_ONCE(ctrl->state); +} + enum nvme_iopolicy { NVME_IOPOLICY_NUMA, NVME_IOPOLICY_RR, -- cgit v1.2.3 From e6e7f7ac03e40795346f1b2994a05f507ad8d345 Mon Sep 17 00:00:00 2001 From: Keith Busch Date: Fri, 27 Oct 2023 10:58:12 -0700 Subject: nvme: ensure reset state check ordering A different CPU may be setting the ctrl->state value, so ensure proper barriers to prevent optimizing to a stale state. Normally it isn't a problem to observe the wrong state as it is merely advisory to take a quicker path during initialization and error recovery, but seeing an old state can report unexpected ENETRESET errors when a reset request was in fact successful. Reported-by: Minh Hoang Reviewed-by: Sagi Grimberg Signed-off-by: Keith Busch Signed-off-by: Hannes Reinecke --- drivers/nvme/host/core.c | 42 ++++++++++++++++++++++-------------------- drivers/nvme/host/fc.c | 6 +++--- drivers/nvme/host/pci.c | 14 +++++++------- drivers/nvme/host/rdma.c | 23 ++++++++++++++--------- drivers/nvme/host/tcp.c | 27 +++++++++++++++++---------- 5 files changed, 63 insertions(+), 49 deletions(-) diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c index 1be1ce522896..d699f0c8b13e 100644 --- a/drivers/nvme/host/core.c +++ b/drivers/nvme/host/core.c @@ -131,7 +131,7 @@ void nvme_queue_scan(struct nvme_ctrl *ctrl) /* * Only new queue scan work when admin and IO queues are both alive */ - if (ctrl->state == NVME_CTRL_LIVE && ctrl->tagset) + if (nvme_ctrl_state(ctrl) == NVME_CTRL_LIVE && ctrl->tagset) queue_work(nvme_wq, &ctrl->scan_work); } @@ -143,7 +143,7 @@ void nvme_queue_scan(struct nvme_ctrl *ctrl) */ int nvme_try_sched_reset(struct nvme_ctrl *ctrl) { - if (ctrl->state != NVME_CTRL_RESETTING) + if (nvme_ctrl_state(ctrl) != NVME_CTRL_RESETTING) return -EBUSY; if (!queue_work(nvme_reset_wq, &ctrl->reset_work)) return -EBUSY; @@ -156,7 +156,7 @@ static void nvme_failfast_work(struct work_struct *work) struct nvme_ctrl *ctrl = container_of(to_delayed_work(work), struct nvme_ctrl, failfast_work); - if (ctrl->state != NVME_CTRL_CONNECTING) + if (nvme_ctrl_state(ctrl) != NVME_CTRL_CONNECTING) return; set_bit(NVME_CTRL_FAILFAST_EXPIRED, &ctrl->flags); @@ -200,7 +200,7 @@ int nvme_reset_ctrl_sync(struct nvme_ctrl *ctrl) ret = nvme_reset_ctrl(ctrl); if (!ret) { flush_work(&ctrl->reset_work); - if (ctrl->state != NVME_CTRL_LIVE) + if (nvme_ctrl_state(ctrl) != NVME_CTRL_LIVE) ret = -ENETRESET; } @@ -499,7 +499,7 @@ bool nvme_change_ctrl_state(struct nvme_ctrl *ctrl, spin_lock_irqsave(&ctrl->lock, flags); - old_state = ctrl->state; + old_state = nvme_ctrl_state(ctrl); switch (new_state) { case NVME_CTRL_LIVE: switch (old_state) { @@ -567,7 +567,7 @@ bool nvme_change_ctrl_state(struct nvme_ctrl *ctrl, } if (changed) { - ctrl->state = new_state; + WRITE_ONCE(ctrl->state, new_state); wake_up_all(&ctrl->state_wq); } @@ -575,11 +575,11 @@ bool nvme_change_ctrl_state(struct nvme_ctrl *ctrl, if (!changed) return false; - if (ctrl->state == NVME_CTRL_LIVE) { + if (new_state == NVME_CTRL_LIVE) { if (old_state == NVME_CTRL_CONNECTING) nvme_stop_failfast_work(ctrl); nvme_kick_requeue_lists(ctrl); - } else if (ctrl->state == NVME_CTRL_CONNECTING && + } else if (new_state == NVME_CTRL_CONNECTING && old_state == NVME_CTRL_RESETTING) { nvme_start_failfast_work(ctrl); } @@ -592,7 +592,7 @@ EXPORT_SYMBOL_GPL(nvme_change_ctrl_state); */ static bool nvme_state_terminal(struct nvme_ctrl *ctrl) { - switch (ctrl->state) { + switch (nvme_ctrl_state(ctrl)) { case NVME_CTRL_NEW: case NVME_CTRL_LIVE: case NVME_CTRL_RESETTING: @@ -617,7 +617,7 @@ bool nvme_wait_reset(struct nvme_ctrl *ctrl) wait_event(ctrl->state_wq, nvme_change_ctrl_state(ctrl, NVME_CTRL_RESETTING) || nvme_state_terminal(ctrl)); - return ctrl->state == NVME_CTRL_RESETTING; + return nvme_ctrl_state(ctrl) == NVME_CTRL_RESETTING; } EXPORT_SYMBOL_GPL(nvme_wait_reset); @@ -704,9 +704,11 @@ EXPORT_SYMBOL_GPL(nvme_init_request); blk_status_t nvme_fail_nonready_command(struct nvme_ctrl *ctrl, struct request *rq) { - if (ctrl->state != NVME_CTRL_DELETING_NOIO && - ctrl->state != NVME_CTRL_DELETING && - ctrl->state != NVME_CTRL_DEAD && + enum nvme_ctrl_state state = nvme_ctrl_state(ctrl); + + if (state != NVME_CTRL_DELETING_NOIO && + state != NVME_CTRL_DELETING && + state != NVME_CTRL_DEAD && !test_bit(NVME_CTRL_FAILFAST_EXPIRED, &ctrl->flags) && !blk_noretry_request(rq) && !(rq->cmd_flags & REQ_NVME_MPATH)) return BLK_STS_RESOURCE; @@ -736,7 +738,7 @@ bool __nvme_check_ready(struct nvme_ctrl *ctrl, struct request *rq, * command, which is require to set the queue live in the * appropinquate states. */ - switch (ctrl->state) { + switch (nvme_ctrl_state(ctrl)) { case NVME_CTRL_CONNECTING: if (blk_rq_is_passthrough(rq) && nvme_is_fabrics(req->cmd) && (req->cmd->fabrics.fctype == nvme_fabrics_type_connect || @@ -2550,7 +2552,7 @@ static void nvme_set_latency_tolerance(struct device *dev, s32 val) if (ctrl->ps_max_latency_us != latency) { ctrl->ps_max_latency_us = latency; - if (ctrl->state == NVME_CTRL_LIVE) + if (nvme_ctrl_state(ctrl) == NVME_CTRL_LIVE) nvme_configure_apst(ctrl); } } @@ -3238,7 +3240,7 @@ static int nvme_dev_open(struct inode *inode, struct file *file) struct nvme_ctrl *ctrl = container_of(inode->i_cdev, struct nvme_ctrl, cdev); - switch (ctrl->state) { + switch (nvme_ctrl_state(ctrl)) { case NVME_CTRL_LIVE: break; default: @@ -3924,7 +3926,7 @@ static void nvme_scan_work(struct work_struct *work) int ret; /* No tagset on a live ctrl means IO queues could not created */ - if (ctrl->state != NVME_CTRL_LIVE || !ctrl->tagset) + if (nvme_ctrl_state(ctrl) != NVME_CTRL_LIVE || !ctrl->tagset) return; /* @@ -3994,7 +3996,7 @@ void nvme_remove_namespaces(struct nvme_ctrl *ctrl) * removing the namespaces' disks; fail all the queues now to avoid * potentially having to clean up the failed sync later. */ - if (ctrl->state == NVME_CTRL_DEAD) + if (nvme_ctrl_state(ctrl) == NVME_CTRL_DEAD) nvme_mark_namespaces_dead(ctrl); /* this is a no-op when called from the controller reset handler */ @@ -4076,7 +4078,7 @@ static void nvme_async_event_work(struct work_struct *work) * flushing ctrl async_event_work after changing the controller state * from LIVE and before freeing the admin queue. */ - if (ctrl->state == NVME_CTRL_LIVE) + if (nvme_ctrl_state(ctrl) == NVME_CTRL_LIVE) ctrl->ops->submit_async_event(ctrl); } @@ -4471,7 +4473,7 @@ int nvme_init_ctrl(struct nvme_ctrl *ctrl, struct device *dev, { int ret; - ctrl->state = NVME_CTRL_NEW; + WRITE_ONCE(ctrl->state, NVME_CTRL_NEW); clear_bit(NVME_CTRL_FAILFAST_EXPIRED, &ctrl->flags); spin_lock_init(&ctrl->lock); mutex_init(&ctrl->scan_lock); diff --git a/drivers/nvme/host/fc.c b/drivers/nvme/host/fc.c index 9f9a3b35dc64..fb22976a36a8 100644 --- a/drivers/nvme/host/fc.c +++ b/drivers/nvme/host/fc.c @@ -557,7 +557,7 @@ nvme_fc_rport_get(struct nvme_fc_rport *rport) static void nvme_fc_resume_controller(struct nvme_fc_ctrl *ctrl) { - switch (ctrl->ctrl.state) { + switch (nvme_ctrl_state(&ctrl->ctrl)) { case NVME_CTRL_NEW: case NVME_CTRL_CONNECTING: /* @@ -793,7 +793,7 @@ nvme_fc_ctrl_connectivity_loss(struct nvme_fc_ctrl *ctrl) "NVME-FC{%d}: controller connectivity lost. Awaiting " "Reconnect", ctrl->cnum); - switch (ctrl->ctrl.state) { + switch (nvme_ctrl_state(&ctrl->ctrl)) { case NVME_CTRL_NEW: case NVME_CTRL_LIVE: /* @@ -3319,7 +3319,7 @@ nvme_fc_reconnect_or_delete(struct nvme_fc_ctrl *ctrl, int status) unsigned long recon_delay = ctrl->ctrl.opts->reconnect_delay * HZ; bool recon = true; - if (ctrl->ctrl.state != NVME_CTRL_CONNECTING) + if (nvme_ctrl_state(&ctrl->ctrl) != NVME_CTRL_CONNECTING) return; if (portptr->port_state == FC_OBJSTATE_ONLINE) { diff --git a/drivers/nvme/host/pci.c b/drivers/nvme/host/pci.c index 507bc149046d..fad4cccce745 100644 --- a/drivers/nvme/host/pci.c +++ b/drivers/nvme/host/pci.c @@ -1233,7 +1233,7 @@ static bool nvme_should_reset(struct nvme_dev *dev, u32 csts) bool nssro = dev->subsystem && (csts & NVME_CSTS_NSSRO); /* If there is a reset/reinit ongoing, we shouldn't reset again. */ - switch (dev->ctrl.state) { + switch (nvme_ctrl_state(&dev->ctrl)) { case NVME_CTRL_RESETTING: case NVME_CTRL_CONNECTING: return false; @@ -1321,7 +1321,7 @@ static enum blk_eh_timer_return nvme_timeout(struct request *req) * cancellation error. All outstanding requests are completed on * shutdown, so we return BLK_EH_DONE. */ - switch (dev->ctrl.state) { + switch (nvme_ctrl_state(&dev->ctrl)) { case NVME_CTRL_CONNECTING: nvme_change_ctrl_state(&dev->ctrl, NVME_CTRL_DELETING); fallthrough; @@ -1593,7 +1593,7 @@ static int nvme_setup_io_queues_trylock(struct nvme_dev *dev) /* * Controller is in wrong state, fail early. */ - if (dev->ctrl.state != NVME_CTRL_CONNECTING) { + if (nvme_ctrl_state(&dev->ctrl) != NVME_CTRL_CONNECTING) { mutex_unlock(&dev->shutdown_lock); return -ENODEV; } @@ -2573,13 +2573,13 @@ static bool nvme_pci_ctrl_is_dead(struct nvme_dev *dev) static void nvme_dev_disable(struct nvme_dev *dev, bool shutdown) { + enum nvme_ctrl_state state = nvme_ctrl_state(&dev->ctrl); struct pci_dev *pdev = to_pci_dev(dev->dev); bool dead; mutex_lock(&dev->shutdown_lock); dead = nvme_pci_ctrl_is_dead(dev); - if (dev->ctrl.state == NVME_CTRL_LIVE || - dev->ctrl.state == NVME_CTRL_RESETTING) { + if (state == NVME_CTRL_LIVE || state == NVME_CTRL_RESETTING) { if (pci_is_enabled(pdev)) nvme_start_freeze(&dev->ctrl); /* @@ -2690,7 +2690,7 @@ static void nvme_reset_work(struct work_struct *work) bool was_suspend = !!(dev->ctrl.ctrl_config & NVME_CC_SHN_NORMAL); int result; - if (dev->ctrl.state != NVME_CTRL_RESETTING) { + if (nvme_ctrl_state(&dev->ctrl) != NVME_CTRL_RESETTING) { dev_warn(dev->ctrl.device, "ctrl state %d is not RESETTING\n", dev->ctrl.state); result = -ENODEV; @@ -3192,7 +3192,7 @@ static int nvme_suspend(struct device *dev) nvme_wait_freeze(ctrl); nvme_sync_queues(ctrl); - if (ctrl->state != NVME_CTRL_LIVE) + if (nvme_ctrl_state(ctrl) != NVME_CTRL_LIVE) goto unfreeze; /* diff --git a/drivers/nvme/host/rdma.c b/drivers/nvme/host/rdma.c index 6d178d555920..81e2621169e5 100644 --- a/drivers/nvme/host/rdma.c +++ b/drivers/nvme/host/rdma.c @@ -984,10 +984,11 @@ free_ctrl: static void nvme_rdma_reconnect_or_remove(struct nvme_rdma_ctrl *ctrl) { + enum nvme_ctrl_state state = nvme_ctrl_state(&ctrl->ctrl); + /* If we are resetting/deleting then do nothing */ - if (ctrl->ctrl.state != NVME_CTRL_CONNECTING) { - WARN_ON_ONCE(ctrl->ctrl.state == NVME_CTRL_NEW || - ctrl->ctrl.state == NVME_CTRL_LIVE); + if (state != NVME_CTRL_CONNECTING) { + WARN_ON_ONCE(state == NVME_CTRL_NEW || state == NVME_CTRL_LIVE); return; } @@ -1059,8 +1060,10 @@ static int nvme_rdma_setup_ctrl(struct nvme_rdma_ctrl *ctrl, bool new) * unless we're during creation of a new controller to * avoid races with teardown flow. */ - WARN_ON_ONCE(ctrl->ctrl.state != NVME_CTRL_DELETING && - ctrl->ctrl.state != NVME_CTRL_DELETING_NOIO); + enum nvme_ctrl_state state = nvme_ctrl_state(&ctrl->ctrl); + + WARN_ON_ONCE(state != NVME_CTRL_DELETING && + state != NVME_CTRL_DELETING_NOIO); WARN_ON_ONCE(new); ret = -EINVAL; goto destroy_io; @@ -1129,8 +1132,10 @@ static void nvme_rdma_error_recovery_work(struct work_struct *work) if (!nvme_change_ctrl_state(&ctrl->ctrl, NVME_CTRL_CONNECTING)) { /* state change failure is ok if we started ctrl delete */ - WARN_ON_ONCE(ctrl->ctrl.state != NVME_CTRL_DELETING && - ctrl->ctrl.state != NVME_CTRL_DELETING_NOIO); + enum nvme_ctrl_state state = nvme_ctrl_state(&ctrl->ctrl); + + WARN_ON_ONCE(state != NVME_CTRL_DELETING && + state != NVME_CTRL_DELETING_NOIO); return; } @@ -1162,7 +1167,7 @@ static void nvme_rdma_wr_error(struct ib_cq *cq, struct ib_wc *wc, struct nvme_rdma_queue *queue = wc->qp->qp_context; struct nvme_rdma_ctrl *ctrl = queue->ctrl; - if (ctrl->ctrl.state == NVME_CTRL_LIVE) + if (nvme_ctrl_state(&ctrl->ctrl) == NVME_CTRL_LIVE) dev_info(ctrl->ctrl.device, "%s for CQE 0x%p failed with status %s (%d)\n", op, wc->wr_cqe, @@ -1945,7 +1950,7 @@ static enum blk_eh_timer_return nvme_rdma_timeout(struct request *rq) dev_warn(ctrl->ctrl.device, "I/O %d QID %d timeout\n", rq->tag, nvme_rdma_queue_idx(queue)); - if (ctrl->ctrl.state != NVME_CTRL_LIVE) { + if (nvme_ctrl_state(&ctrl->ctrl) != NVME_CTRL_LIVE) { /* * If we are resetting, connecting or deleting we should * complete immediately because we may block controller diff --git a/drivers/nvme/host/tcp.c b/drivers/nvme/host/tcp.c index d79811cfa0ce..08805f027810 100644 --- a/drivers/nvme/host/tcp.c +++ b/drivers/nvme/host/tcp.c @@ -2152,10 +2152,11 @@ static void nvme_tcp_teardown_io_queues(struct nvme_ctrl *ctrl, static void nvme_tcp_reconnect_or_remove(struct nvme_ctrl *ctrl) { + enum nvme_ctrl_state state = nvme_ctrl_state(ctrl); + /* If we are resetting/deleting then do nothing */ - if (ctrl->state != NVME_CTRL_CONNECTING) { - WARN_ON_ONCE(ctrl->state == NVME_CTRL_NEW || - ctrl->state == NVME_CTRL_LIVE); + if (state != NVME_CTRL_CONNECTING) { + WARN_ON_ONCE(state == NVME_CTRL_NEW || state == NVME_CTRL_LIVE); return; } @@ -2215,8 +2216,10 @@ static int nvme_tcp_setup_ctrl(struct nvme_ctrl *ctrl, bool new) * unless we're during creation of a new controller to * avoid races with teardown flow. */ - WARN_ON_ONCE(ctrl->state != NVME_CTRL_DELETING && - ctrl->state != NVME_CTRL_DELETING_NOIO); + enum nvme_ctrl_state state = nvme_ctrl_state(ctrl); + + WARN_ON_ONCE(state != NVME_CTRL_DELETING && + state != NVME_CTRL_DELETING_NOIO); WARN_ON_ONCE(new); ret = -EINVAL; goto destroy_io; @@ -2280,8 +2283,10 @@ static void nvme_tcp_error_recovery_work(struct work_struct *work) if (!nvme_change_ctrl_state(ctrl, NVME_CTRL_CONNECTING)) { /* state change failure is ok if we started ctrl delete */ - WARN_ON_ONCE(ctrl->state != NVME_CTRL_DELETING && - ctrl->state != NVME_CTRL_DELETING_NOIO); + enum nvme_ctrl_state state = nvme_ctrl_state(ctrl); + + WARN_ON_ONCE(state != NVME_CTRL_DELETING && + state != NVME_CTRL_DELETING_NOIO); return; } @@ -2311,8 +2316,10 @@ static void nvme_reset_ctrl_work(struct work_struct *work) if (!nvme_change_ctrl_state(ctrl, NVME_CTRL_CONNECTING)) { /* state change failure is ok if we started ctrl delete */ - WARN_ON_ONCE(ctrl->state != NVME_CTRL_DELETING && - ctrl->state != NVME_CTRL_DELETING_NOIO); + enum nvme_ctrl_state state = nvme_ctrl_state(ctrl); + + WARN_ON_ONCE(state != NVME_CTRL_DELETING && + state != NVME_CTRL_DELETING_NOIO); return; } @@ -2430,7 +2437,7 @@ static enum blk_eh_timer_return nvme_tcp_timeout(struct request *rq) nvme_tcp_queue_id(req->queue), nvme_cid(rq), pdu->hdr.type, opc, nvme_opcode_str(qid, opc, fctype)); - if (ctrl->state != NVME_CTRL_LIVE) { + if (nvme_ctrl_state(ctrl) != NVME_CTRL_LIVE) { /* * If we are resetting, connecting or deleting we should * complete immediately because we may block controller -- cgit v1.2.3 From 7be866b1cf0bf1dfa74480fe8097daeceda68622 Mon Sep 17 00:00:00 2001 From: Keith Busch Date: Tue, 2 May 2023 11:43:41 -0700 Subject: nvme-ioctl: move capable() admin check to the end This can be an expensive call on some kernel configs. Move it to the end after checking the cheaper ways to determine if the command is allowed. Reviewed-by: Jens Axboe Reviewed-by: Sagi Grimberg Reviewed-by: Christoph Hellwig Signed-off-by: Keith Busch --- drivers/nvme/host/ioctl.c | 21 +++++++++++---------- 1 file changed, 11 insertions(+), 10 deletions(-) diff --git a/drivers/nvme/host/ioctl.c b/drivers/nvme/host/ioctl.c index 529b9954d2b8..4939ed35638f 100644 --- a/drivers/nvme/host/ioctl.c +++ b/drivers/nvme/host/ioctl.c @@ -18,15 +18,12 @@ static bool nvme_cmd_allowed(struct nvme_ns *ns, struct nvme_command *c, { u32 effects; - if (capable(CAP_SYS_ADMIN)) - return true; - /* * Do not allow unprivileged passthrough on partitions, as that allows an * escape from the containment of the partition. */ if (flags & NVME_IOCTL_PARTITION) - return false; + goto admin; /* * Do not allow unprivileged processes to send vendor specific or fabrics @@ -34,7 +31,7 @@ static bool nvme_cmd_allowed(struct nvme_ns *ns, struct nvme_command *c, */ if (c->common.opcode >= nvme_cmd_vendor_start || c->common.opcode == nvme_fabrics_command) - return false; + goto admin; /* * Do not allow unprivileged passthrough of admin commands except @@ -53,7 +50,7 @@ static bool nvme_cmd_allowed(struct nvme_ns *ns, struct nvme_command *c, return true; } } - return false; + goto admin; } /* @@ -63,7 +60,7 @@ static bool nvme_cmd_allowed(struct nvme_ns *ns, struct nvme_command *c, */ effects = nvme_command_effects(ns->ctrl, ns, c->common.opcode); if (!(effects & NVME_CMD_EFFECTS_CSUPP)) - return false; + goto admin; /* * Don't allow passthrough for command that have intrusive (or unknown) @@ -72,16 +69,20 @@ static bool nvme_cmd_allowed(struct nvme_ns *ns, struct nvme_command *c, if (effects & ~(NVME_CMD_EFFECTS_CSUPP | NVME_CMD_EFFECTS_LBCC | NVME_CMD_EFFECTS_UUID_SEL | NVME_CMD_EFFECTS_SCOPE_MASK)) - return false; + goto admin; /* * Only allow I/O commands that transfer data to the controller or that * change the logical block contents if the file descriptor is open for * writing. */ - if (nvme_is_write(c) || (effects & NVME_CMD_EFFECTS_LBCC)) - return open_for_write; + if ((nvme_is_write(c) || (effects & NVME_CMD_EFFECTS_LBCC)) && + !open_for_write) + goto admin; + return true; +admin: + return capable(CAP_SYS_ADMIN); } /* -- cgit v1.2.3 From 29ac4b2f9263f52ba12fa35832cc6506ce3b4793 Mon Sep 17 00:00:00 2001 From: Shin'ichiro Kawasaki Date: Wed, 29 Nov 2023 13:49:51 +0900 Subject: nvme: improve NVME_HOST_AUTH and NVME_TARGET_AUTH config descriptions Currently two similar config options NVME_HOST_AUTH and NVME_TARGET_AUTH have almost same descriptions. It is confusing to choose them in menuconfig. Improve the descriptions to distinguish them. Signed-off-by: Shin'ichiro Kawasaki Reviewed-by: Sagi Grimberg Reviewed-by: Christoph Hellwig Signed-off-by: Keith Busch --- drivers/nvme/host/Kconfig | 5 +++-- drivers/nvme/target/Kconfig | 5 +++-- 2 files changed, 6 insertions(+), 4 deletions(-) diff --git a/drivers/nvme/host/Kconfig b/drivers/nvme/host/Kconfig index 8fe2dd619e80..b309c8be720f 100644 --- a/drivers/nvme/host/Kconfig +++ b/drivers/nvme/host/Kconfig @@ -107,11 +107,12 @@ config NVME_TCP_TLS If unsure, say N. config NVME_HOST_AUTH - bool "NVM Express over Fabrics In-Band Authentication" + bool "NVMe over Fabrics In-Band Authentication in host side" depends on NVME_CORE select NVME_AUTH help - This provides support for NVMe over Fabrics In-Band Authentication. + This provides support for NVMe over Fabrics In-Band Authentication in + host side. If unsure, say N. diff --git a/drivers/nvme/target/Kconfig b/drivers/nvme/target/Kconfig index e1ebc73f3e5e..872dd1a0acd8 100644 --- a/drivers/nvme/target/Kconfig +++ b/drivers/nvme/target/Kconfig @@ -99,10 +99,11 @@ config NVME_TARGET_TCP_TLS If unsure, say N. config NVME_TARGET_AUTH - bool "NVMe over Fabrics In-band Authentication support" + bool "NVMe over Fabrics In-band Authentication in target side" depends on NVME_TARGET select NVME_AUTH help - This enables support for NVMe over Fabrics In-band Authentication + This enables support for NVMe over Fabrics In-band Authentication in + target side. If unsure, say N. -- cgit v1.2.3 From 20dc66f2d76b4a410df14e4675e373b718babc34 Mon Sep 17 00:00:00 2001 From: Nitesh Shetty Date: Tue, 28 Nov 2023 17:59:57 +0530 Subject: nvme: prevent potential spectre v1 gadget This patch fixes the smatch warning, "nvmet_ns_ana_grpid_store() warn: potential spectre issue 'nvmet_ana_group_enabled' [w] (local cap)" Prevent the contents of kernel memory from being leaked to user space via speculative execution by using array_index_nospec. Signed-off-by: Nitesh Shetty Reviewed-by: Christoph Hellwig Reviewed-by: Sagi Grimberg Signed-off-by: Keith Busch --- drivers/nvme/target/configfs.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/nvme/target/configfs.c b/drivers/nvme/target/configfs.c index e307a044b1a1..d937fe05129e 100644 --- a/drivers/nvme/target/configfs.c +++ b/drivers/nvme/target/configfs.c @@ -18,6 +18,7 @@ #include #include #include +#include #include "nvmet.h" @@ -621,6 +622,7 @@ static ssize_t nvmet_ns_ana_grpid_store(struct config_item *item, down_write(&nvmet_ana_sem); oldgrpid = ns->anagrpid; + newgrpid = array_index_nospec(newgrpid, NVMET_MAX_ANAGRPS); nvmet_ana_group_enabled[newgrpid]++; ns->anagrpid = newgrpid; nvmet_ana_group_enabled[oldgrpid]--; @@ -1812,6 +1814,7 @@ static struct config_group *nvmet_ana_groups_make_group( grp->grpid = grpid; down_write(&nvmet_ana_sem); + grpid = array_index_nospec(grpid, NVMET_MAX_ANAGRPS); nvmet_ana_group_enabled[grpid]++; up_write(&nvmet_ana_sem); -- cgit v1.2.3 From 839a40d1e730977d4448d141fa653517c2959a88 Mon Sep 17 00:00:00 2001 From: Bitao Hu Date: Thu, 30 Nov 2023 10:13:37 +0800 Subject: nvme: fix deadlock between reset and scan If controller reset occurs when allocating namespace, both nvme_reset_work and nvme_scan_work will hang, as shown below. Test Scripts: for ((t=1;t<=128;t++)) do nsid=`nvme create-ns /dev/nvme1 -s 14537724 -c 14537724 -f 0 -m 0 \ -d 0 | awk -F: '{print($NF);}'` nvme attach-ns /dev/nvme1 -n $nsid -c 0 done nvme reset /dev/nvme1 We will find that both nvme_reset_work and nvme_scan_work hung: INFO: task kworker/u249:4:17848 blocked for more than 120 seconds. "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:kworker/u249:4 state:D stack: 0 pid:17848 ppid: 2 flags:0x00000028 Workqueue: nvme-reset-wq nvme_reset_work [nvme] Call trace: __switch_to+0xb4/0xfc __schedule+0x22c/0x670 schedule+0x4c/0xd0 blk_mq_freeze_queue_wait+0x84/0xc0 nvme_wait_freeze+0x40/0x64 [nvme_core] nvme_reset_work+0x1c0/0x5cc [nvme] process_one_work+0x1d8/0x4b0 worker_thread+0x230/0x440 kthread+0x114/0x120 INFO: task kworker/u249:3:22404 blocked for more than 120 seconds. "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:kworker/u249:3 state:D stack: 0 pid:22404 ppid: 2 flags:0x00000028 Workqueue: nvme-wq nvme_scan_work [nvme_core] Call trace: __switch_to+0xb4/0xfc __schedule+0x22c/0x670 schedule+0x4c/0xd0 rwsem_down_write_slowpath+0x32c/0x98c down_write+0x70/0x80 nvme_alloc_ns+0x1ac/0x38c [nvme_core] nvme_validate_or_alloc_ns+0xbc/0x150 [nvme_core] nvme_scan_ns_list+0xe8/0x2e4 [nvme_core] nvme_scan_work+0x60/0x500 [nvme_core] process_one_work+0x1d8/0x4b0 worker_thread+0x260/0x440 kthread+0x114/0x120 INFO: task nvme:28428 blocked for more than 120 seconds. "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:nvme state:D stack: 0 pid:28428 ppid: 27119 flags:0x00000000 Call trace: __switch_to+0xb4/0xfc __schedule+0x22c/0x670 schedule+0x4c/0xd0 schedule_timeout+0x160/0x194 do_wait_for_common+0xac/0x1d0 __wait_for_common+0x78/0x100 wait_for_completion+0x24/0x30 __flush_work.isra.0+0x74/0x90 flush_work+0x14/0x20 nvme_reset_ctrl_sync+0x50/0x74 [nvme_core] nvme_dev_ioctl+0x1b0/0x250 [nvme_core] __arm64_sys_ioctl+0xa8/0xf0 el0_svc_common+0x88/0x234 do_el0_svc+0x7c/0x90 el0_svc+0x1c/0x30 el0_sync_handler+0xa8/0xb0 el0_sync+0x148/0x180 The reason for the hang is that nvme_reset_work occurs while nvme_scan_work is still running. nvme_scan_work may add new ns into ctrl->namespaces list after nvme_reset_work frozen all ns->q in ctrl->namespaces list. The newly added ns is not frozen, so nvme_wait_freeze will wait forever. Unfortunately, ctrl->namespaces_rwsem is held by nvme_reset_work, so nvme_scan_work will also wait forever. Now we are deadlocked! PROCESS1 PROCESS2 ============== ============== nvme_scan_work ... nvme_reset_work nvme_validate_or_alloc_ns nvme_dev_disable nvme_alloc_ns nvme_start_freeze down_write ... nvme_ns_add_to_ctrl_list ... up_write nvme_wait_freeze ... down_read nvme_alloc_ns blk_mq_freeze_queue_wait down_write Fix by marking the ctrl with say NVME_CTRL_FROZEN flag set in nvme_start_freeze and cleared in nvme_unfreeze. Then the scan can check it before adding the new namespace (under the namespaces_rwsem). Signed-off-by: Bitao Hu Reviewed-by: Guixin Liu Reviewed-by: Sagi Grimberg Reviewed-by: Christoph Hellwig Signed-off-by: Keith Busch --- drivers/nvme/host/core.c | 10 ++++++++++ drivers/nvme/host/nvme.h | 1 + 2 files changed, 11 insertions(+) diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c index d699f0c8b13e..8ebdfd623e0f 100644 --- a/drivers/nvme/host/core.c +++ b/drivers/nvme/host/core.c @@ -3662,6 +3662,14 @@ static void nvme_alloc_ns(struct nvme_ctrl *ctrl, struct nvme_ns_info *info) goto out_unlink_ns; down_write(&ctrl->namespaces_rwsem); + /* + * Ensure that no namespaces are added to the ctrl list after the queues + * are frozen, thereby avoiding a deadlock between scan and reset. + */ + if (test_bit(NVME_CTRL_FROZEN, &ctrl->flags)) { + up_write(&ctrl->namespaces_rwsem); + goto out_unlink_ns; + } nvme_ns_add_to_ctrl_list(ns); up_write(&ctrl->namespaces_rwsem); nvme_get_ctrl(ctrl); @@ -4583,6 +4591,7 @@ void nvme_unfreeze(struct nvme_ctrl *ctrl) list_for_each_entry(ns, &ctrl->namespaces, list) blk_mq_unfreeze_queue(ns->queue); up_read(&ctrl->namespaces_rwsem); + clear_bit(NVME_CTRL_FROZEN, &ctrl->flags); } EXPORT_SYMBOL_GPL(nvme_unfreeze); @@ -4616,6 +4625,7 @@ void nvme_start_freeze(struct nvme_ctrl *ctrl) { struct nvme_ns *ns; + set_bit(NVME_CTRL_FROZEN, &ctrl->flags); down_read(&ctrl->namespaces_rwsem); list_for_each_entry(ns, &ctrl->namespaces, list) blk_freeze_queue_start(ns->queue); diff --git a/drivers/nvme/host/nvme.h b/drivers/nvme/host/nvme.h index 578e6d311bc9..efb20a8e23a3 100644 --- a/drivers/nvme/host/nvme.h +++ b/drivers/nvme/host/nvme.h @@ -251,6 +251,7 @@ enum nvme_ctrl_flags { NVME_CTRL_STOPPED = 3, NVME_CTRL_SKIP_ID_CNS_CS = 4, NVME_CTRL_DIRTY_CAPABILITY = 5, + NVME_CTRL_FROZEN = 6, }; struct nvme_ctrl { -- cgit v1.2.3 From d8792a5734b0f3e58b898c2e2f910bfac48e9ee3 Mon Sep 17 00:00:00 2001 From: Charlie Jenkins Date: Mon, 27 Nov 2023 14:04:59 -0800 Subject: riscv: Safely remove entries from relocation list MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Use the safe versions of list and hlist iteration to safely remove entries from the module relocation lists. To allow mutliple threads to load modules concurrently, move relocation list pointers onto the stack rather than using global variables. Fixes: 8fd6c5142395 ("riscv: Add remaining module relocations") Reported-by: Ron Economos Closes: https://lore.kernel.org/linux-riscv/444de86a-7e7c-4de7-5d1d-c1c40eefa4ba@w6rz.net Signed-off-by: Charlie Jenkins Tested-by: Björn Töpel Link: https://lore.kernel.org/r/20231127-module_linking_freeing-v4-1-a2ca1d7027d0@rivosinc.com Signed-off-by: Palmer Dabbelt --- arch/riscv/kernel/module.c | 110 +++++++++++++++++++++++++++++++++------------ 1 file changed, 82 insertions(+), 28 deletions(-) diff --git a/arch/riscv/kernel/module.c b/arch/riscv/kernel/module.c index 56a8c78e9e21..53593fe58cd8 100644 --- a/arch/riscv/kernel/module.c +++ b/arch/riscv/kernel/module.c @@ -40,15 +40,6 @@ struct relocation_handlers { long buffer); }; -unsigned int initialize_relocation_hashtable(unsigned int num_relocations); -void process_accumulated_relocations(struct module *me); -int add_relocation_to_accumulate(struct module *me, int type, void *location, - unsigned int hashtable_bits, Elf_Addr v); - -struct hlist_head *relocation_hashtable; - -struct list_head used_buckets_list; - /* * The auipc+jalr instruction pair can reach any PC-relative offset * in the range [-2^31 - 2^11, 2^31 - 2^11) @@ -604,7 +595,10 @@ static const struct relocation_handlers reloc_handlers[] = { /* 192-255 nonstandard ABI extensions */ }; -void process_accumulated_relocations(struct module *me) +static void +process_accumulated_relocations(struct module *me, + struct hlist_head **relocation_hashtable, + struct list_head *used_buckets_list) { /* * Only ADD/SUB/SET/ULEB128 should end up here. @@ -624,18 +618,25 @@ void process_accumulated_relocations(struct module *me) * - Each relocation entry for a location address */ struct used_bucket *bucket_iter; + struct used_bucket *bucket_iter_tmp; struct relocation_head *rel_head_iter; + struct hlist_node *rel_head_iter_tmp; struct relocation_entry *rel_entry_iter; + struct relocation_entry *rel_entry_iter_tmp; int curr_type; void *location; long buffer; - list_for_each_entry(bucket_iter, &used_buckets_list, head) { - hlist_for_each_entry(rel_head_iter, bucket_iter->bucket, node) { + list_for_each_entry_safe(bucket_iter, bucket_iter_tmp, + used_buckets_list, head) { + hlist_for_each_entry_safe(rel_head_iter, rel_head_iter_tmp, + bucket_iter->bucket, node) { buffer = 0; location = rel_head_iter->location; - list_for_each_entry(rel_entry_iter, - rel_head_iter->rel_entry, head) { + list_for_each_entry_safe(rel_entry_iter, + rel_entry_iter_tmp, + rel_head_iter->rel_entry, + head) { curr_type = rel_entry_iter->type; reloc_handlers[curr_type].reloc_handler( me, &buffer, rel_entry_iter->value); @@ -648,11 +649,14 @@ void process_accumulated_relocations(struct module *me) kfree(bucket_iter); } - kfree(relocation_hashtable); + kfree(*relocation_hashtable); } -int add_relocation_to_accumulate(struct module *me, int type, void *location, - unsigned int hashtable_bits, Elf_Addr v) +static int add_relocation_to_accumulate(struct module *me, int type, + void *location, + unsigned int hashtable_bits, Elf_Addr v, + struct hlist_head *relocation_hashtable, + struct list_head *used_buckets_list) { struct relocation_entry *entry; struct relocation_head *rel_head; @@ -661,6 +665,10 @@ int add_relocation_to_accumulate(struct module *me, int type, void *location, unsigned long hash; entry = kmalloc(sizeof(*entry), GFP_KERNEL); + + if (!entry) + return -ENOMEM; + INIT_LIST_HEAD(&entry->head); entry->type = type; entry->value = v; @@ -669,7 +677,10 @@ int add_relocation_to_accumulate(struct module *me, int type, void *location, current_head = &relocation_hashtable[hash]; - /* Find matching location (if any) */ + /* + * Search for the relocation_head for the relocations that happen at the + * provided location + */ bool found = false; struct relocation_head *rel_head_iter; @@ -681,19 +692,45 @@ int add_relocation_to_accumulate(struct module *me, int type, void *location, } } + /* + * If there has not yet been any relocations at the provided location, + * create a relocation_head for that location and populate it with this + * relocation_entry. + */ if (!found) { rel_head = kmalloc(sizeof(*rel_head), GFP_KERNEL); + + if (!rel_head) { + kfree(entry); + return -ENOMEM; + } + rel_head->rel_entry = kmalloc(sizeof(struct list_head), GFP_KERNEL); + + if (!rel_head->rel_entry) { + kfree(entry); + kfree(rel_head); + return -ENOMEM; + } + INIT_LIST_HEAD(rel_head->rel_entry); rel_head->location = location; INIT_HLIST_NODE(&rel_head->node); if (!current_head->first) { bucket = kmalloc(sizeof(struct used_bucket), GFP_KERNEL); + + if (!bucket) { + kfree(entry); + kfree(rel_head); + kfree(rel_head->rel_entry); + return -ENOMEM; + } + INIT_LIST_HEAD(&bucket->head); bucket->bucket = current_head; - list_add(&bucket->head, &used_buckets_list); + list_add(&bucket->head, used_buckets_list); } hlist_add_head(&rel_head->node, current_head); } @@ -704,7 +741,9 @@ int add_relocation_to_accumulate(struct module *me, int type, void *location, return 0; } -unsigned int initialize_relocation_hashtable(unsigned int num_relocations) +static unsigned int +initialize_relocation_hashtable(unsigned int num_relocations, + struct hlist_head **relocation_hashtable) { /* Can safely assume that bits is not greater than sizeof(long) */ unsigned long hashtable_size = roundup_pow_of_two(num_relocations); @@ -720,12 +759,13 @@ unsigned int initialize_relocation_hashtable(unsigned int num_relocations) hashtable_size <<= should_double_size; - relocation_hashtable = kmalloc_array(hashtable_size, - sizeof(*relocation_hashtable), - GFP_KERNEL); - __hash_init(relocation_hashtable, hashtable_size); + *relocation_hashtable = kmalloc_array(hashtable_size, + sizeof(*relocation_hashtable), + GFP_KERNEL); + if (!*relocation_hashtable) + return -ENOMEM; - INIT_LIST_HEAD(&used_buckets_list); + __hash_init(*relocation_hashtable, hashtable_size); return hashtable_bits; } @@ -742,7 +782,17 @@ int apply_relocate_add(Elf_Shdr *sechdrs, const char *strtab, Elf_Addr v; int res; unsigned int num_relocations = sechdrs[relsec].sh_size / sizeof(*rel); - unsigned int hashtable_bits = initialize_relocation_hashtable(num_relocations); + struct hlist_head *relocation_hashtable; + struct list_head used_buckets_list; + unsigned int hashtable_bits; + + hashtable_bits = initialize_relocation_hashtable(num_relocations, + &relocation_hashtable); + + if (hashtable_bits < 0) + return hashtable_bits; + + INIT_LIST_HEAD(&used_buckets_list); pr_debug("Applying relocate section %u to %u\n", relsec, sechdrs[relsec].sh_info); @@ -823,14 +873,18 @@ int apply_relocate_add(Elf_Shdr *sechdrs, const char *strtab, } if (reloc_handlers[type].accumulate_handler) - res = add_relocation_to_accumulate(me, type, location, hashtable_bits, v); + res = add_relocation_to_accumulate(me, type, location, + hashtable_bits, v, + relocation_hashtable, + &used_buckets_list); else res = handler(me, location, v); if (res) return res; } - process_accumulated_relocations(me); + process_accumulated_relocations(me, &relocation_hashtable, + &used_buckets_list); return 0; } -- cgit v1.2.3 From 4a92a87950c4f86bc372ee3b1da4ba9d092252a9 Mon Sep 17 00:00:00 2001 From: Charlie Jenkins Date: Mon, 27 Nov 2023 14:05:00 -0800 Subject: riscv: Correct type casting in module loading MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Use __le16 with le16_to_cpu. Fixes: 8fd6c5142395 ("riscv: Add remaining module relocations") Signed-off-by: Charlie Jenkins Reviewed-by: Samuel Holland Tested-by: Samuel Holland Tested-by: Björn Töpel Link: https://lore.kernel.org/r/20231127-module_linking_freeing-v4-2-a2ca1d7027d0@rivosinc.com Signed-off-by: Palmer Dabbelt --- arch/riscv/kernel/module.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/riscv/kernel/module.c b/arch/riscv/kernel/module.c index 53593fe58cd8..aac019ed63b1 100644 --- a/arch/riscv/kernel/module.c +++ b/arch/riscv/kernel/module.c @@ -55,7 +55,7 @@ static bool riscv_insn_valid_32bit_offset(ptrdiff_t val) static int riscv_insn_rmw(void *location, u32 keep, u32 set) { - u16 *parcel = location; + __le16 *parcel = location; u32 insn = (u32)le16_to_cpu(parcel[0]) | (u32)le16_to_cpu(parcel[1]) << 16; insn &= keep; @@ -68,7 +68,7 @@ static int riscv_insn_rmw(void *location, u32 keep, u32 set) static int riscv_insn_rvc_rmw(void *location, u16 keep, u16 set) { - u16 *parcel = location; + __le16 *parcel = location; u16 insn = le16_to_cpu(*parcel); insn &= keep; -- cgit v1.2.3 From 815f986f33eeb06652d59d8a4d405d4fdb4e59a8 Mon Sep 17 00:00:00 2001 From: Heiko Stuebner Date: Fri, 1 Dec 2023 14:48:59 +0100 Subject: arm64: dts: rockchip: drop interrupt-names property from rk3588s dfi The dfi binding does not specify interrupt names, with the interrupts just specifying channels 0-x. So drop the unspecified property. Fixes: 5a6976b1040a ("arm64: dts: rockchip: Add DFI to rk3588s") Reported-by: Jagan Teki Signed-off-by: Heiko Stuebner Link: https://lore.kernel.org/r/20231201134859.322491-1-heiko@sntech.de --- arch/arm64/boot/dts/rockchip/rk3588s.dtsi | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/arm64/boot/dts/rockchip/rk3588s.dtsi b/arch/arm64/boot/dts/rockchip/rk3588s.dtsi index 7064c0e9179f..8aa0499f9b03 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588s.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3588s.dtsi @@ -1362,7 +1362,6 @@ , , ; - interrupt-names = "ch0", "ch1", "ch2", "ch3"; rockchip,pmu = <&pmu1grf>; }; -- cgit v1.2.3 From 7b2404a886f8b91250c31855d287e632123e1746 Mon Sep 17 00:00:00 2001 From: David Howells Date: Fri, 1 Dec 2023 00:22:00 +0000 Subject: cifs: Fix flushing, invalidation and file size with copy_file_range() Fix a number of issues in the cifs filesystem implementation of the copy_file_range() syscall in cifs_file_copychunk_range(). Firstly, the invalidation of the destination range is handled incorrectly: We shouldn't just invalidate the whole file as dirty data in the file may get lost and we can't just call truncate_inode_pages_range() to invalidate the destination range as that will erase parts of a partial folio at each end whilst invalidating and discarding all the folios in the middle. We need to force all the folios covering the range to be reloaded, but we mustn't lose dirty data in them that's not in the destination range. Further, we shouldn't simply round out the range to PAGE_SIZE at each end as cifs should move to support multipage folios. Secondly, there's an issue whereby a write may have extended the file locally, but not have been written back yet. This can leaves the local idea of the EOF at a later point than the server's EOF. If a copy request is issued, this will fail on the server with STATUS_INVALID_VIEW_SIZE (which gets translated to -EIO locally) if the copy source extends past the server's EOF. Fix this by: (0) Flush the source region (already done). The flush does nothing and the EOF isn't moved if the source region has no dirty data. (1) Move the EOF to the end of the source region if it isn't already at least at this point. If we can't do this, for instance if the server doesn't support it, just flush the entire source file. (2) Find the folio (if present) at each end of the range, flushing it and increasing the region-to-be-invalidated to cover those in their entirety. (3) Fully discard all the folios covering the range as we want them to be reloaded. (4) Then perform the copy. Thirdly, set i_size after doing the copychunk_range operation as this value may be used by various things internally. stat() hides the issue because setting ->time to 0 causes cifs_getatr() to revalidate the attributes. These were causing the generic/075 xfstest to fail. Fixes: 620d8745b35d ("Introduce cifs_copy_file_range()") Cc: stable@vger.kernel.org Signed-off-by: David Howells cc: Paulo Alcantara cc: Shyam Prasad N cc: Rohith Surabattula cc: Matthew Wilcox cc: Jeff Layton cc: linux-cifs@vger.kernel.org cc: linux-mm@kvack.org Signed-off-by: David Howells Signed-off-by: Steve French --- fs/smb/client/cifsfs.c | 102 +++++++++++++++++++++++++++++++++++++++++++++++-- 1 file changed, 99 insertions(+), 3 deletions(-) diff --git a/fs/smb/client/cifsfs.c b/fs/smb/client/cifsfs.c index ea3a7a668b45..8097a9b3e98c 100644 --- a/fs/smb/client/cifsfs.c +++ b/fs/smb/client/cifsfs.c @@ -1196,6 +1196,72 @@ const struct inode_operations cifs_symlink_inode_ops = { .listxattr = cifs_listxattr, }; +/* + * Advance the EOF marker to after the source range. + */ +static int cifs_precopy_set_eof(struct inode *src_inode, struct cifsInodeInfo *src_cifsi, + struct cifs_tcon *src_tcon, + unsigned int xid, loff_t src_end) +{ + struct cifsFileInfo *writeable_srcfile; + int rc = -EINVAL; + + writeable_srcfile = find_writable_file(src_cifsi, FIND_WR_FSUID_ONLY); + if (writeable_srcfile) { + if (src_tcon->ses->server->ops->set_file_size) + rc = src_tcon->ses->server->ops->set_file_size( + xid, src_tcon, writeable_srcfile, + src_inode->i_size, true /* no need to set sparse */); + else + rc = -ENOSYS; + cifsFileInfo_put(writeable_srcfile); + cifs_dbg(FYI, "SetFSize for copychunk rc = %d\n", rc); + } + + if (rc < 0) + goto set_failed; + + netfs_resize_file(&src_cifsi->netfs, src_end); + fscache_resize_cookie(cifs_inode_cookie(src_inode), src_end); + return 0; + +set_failed: + return filemap_write_and_wait(src_inode->i_mapping); +} + +/* + * Flush out either the folio that overlaps the beginning of a range in which + * pos resides or the folio that overlaps the end of a range unless that folio + * is entirely within the range we're going to invalidate. We extend the flush + * bounds to encompass the folio. + */ +static int cifs_flush_folio(struct inode *inode, loff_t pos, loff_t *_fstart, loff_t *_fend, + bool first) +{ + struct folio *folio; + unsigned long long fpos, fend; + pgoff_t index = pos / PAGE_SIZE; + size_t size; + int rc = 0; + + folio = filemap_get_folio(inode->i_mapping, index); + if (IS_ERR(folio)) + return 0; + + size = folio_size(folio); + fpos = folio_pos(folio); + fend = fpos + size - 1; + *_fstart = min_t(unsigned long long, *_fstart, fpos); + *_fend = max_t(unsigned long long, *_fend, fend); + if ((first && pos == fpos) || (!first && pos == fend)) + goto out; + + rc = filemap_write_and_wait_range(inode->i_mapping, fpos, fend); +out: + folio_put(folio); + return rc; +} + static loff_t cifs_remap_file_range(struct file *src_file, loff_t off, struct file *dst_file, loff_t destoff, loff_t len, unsigned int remap_flags) @@ -1263,10 +1329,12 @@ ssize_t cifs_file_copychunk_range(unsigned int xid, { struct inode *src_inode = file_inode(src_file); struct inode *target_inode = file_inode(dst_file); + struct cifsInodeInfo *src_cifsi = CIFS_I(src_inode); struct cifsFileInfo *smb_file_src; struct cifsFileInfo *smb_file_target; struct cifs_tcon *src_tcon; struct cifs_tcon *target_tcon; + unsigned long long destend, fstart, fend; ssize_t rc; cifs_dbg(FYI, "copychunk range\n"); @@ -1306,13 +1374,41 @@ ssize_t cifs_file_copychunk_range(unsigned int xid, if (rc) goto unlock; - /* should we flush first and last page first */ - truncate_inode_pages(&target_inode->i_data, 0); + /* The server-side copy will fail if the source crosses the EOF marker. + * Advance the EOF marker after the flush above to the end of the range + * if it's short of that. + */ + if (src_cifsi->server_eof < off + len) { + rc = cifs_precopy_set_eof(src_inode, src_cifsi, src_tcon, xid, off + len); + if (rc < 0) + goto unlock; + } + + destend = destoff + len - 1; + + /* Flush the folios at either end of the destination range to prevent + * accidental loss of dirty data outside of the range. + */ + fstart = destoff; + fend = destend; + + rc = cifs_flush_folio(target_inode, destoff, &fstart, &fend, true); + if (rc) + goto unlock; + rc = cifs_flush_folio(target_inode, destend, &fstart, &fend, false); + if (rc) + goto unlock; + + /* Discard all the folios that overlap the destination region. */ + truncate_inode_pages_range(&target_inode->i_data, fstart, fend); rc = file_modified(dst_file); - if (!rc) + if (!rc) { rc = target_tcon->ses->server->ops->copychunk_range(xid, smb_file_src, smb_file_target, off, len, destoff); + if (rc > 0 && destoff + rc > i_size_read(target_inode)) + truncate_setsize(target_inode, destoff + rc); + } file_accessed(src_file); -- cgit v1.2.3 From c54fc3a4f375663f2361a9cbb2955fb4ef912879 Mon Sep 17 00:00:00 2001 From: David Howells Date: Fri, 1 Dec 2023 00:22:01 +0000 Subject: cifs: Fix flushing, invalidation and file size with FICLONE Fix a number of issues in the cifs filesystem implementation of the FICLONE ioctl in cifs_remap_file_range(). This is analogous to the previously fixed bug in cifs_file_copychunk_range() and can share the helper functions. Firstly, the invalidation of the destination range is handled incorrectly: We shouldn't just invalidate the whole file as dirty data in the file may get lost and we can't just call truncate_inode_pages_range() to invalidate the destination range as that will erase parts of a partial folio at each end whilst invalidating and discarding all the folios in the middle. We need to force all the folios covering the range to be reloaded, but we mustn't lose dirty data in them that's not in the destination range. Further, we shouldn't simply round out the range to PAGE_SIZE at each end as cifs should move to support multipage folios. Secondly, there's an issue whereby a write may have extended the file locally, but not have been written back yet. This can leaves the local idea of the EOF at a later point than the server's EOF. If a clone request is issued, this will fail on the server with STATUS_INVALID_VIEW_SIZE (which gets translated to -EIO locally) if the clone source extends past the server's EOF. Fix this by: (0) Flush the source region (already done). The flush does nothing and the EOF isn't moved if the source region has no dirty data. (1) Move the EOF to the end of the source region if it isn't already at least at this point. If we can't do this, for instance if the server doesn't support it, just flush the entire source file. (2) Find the folio (if present) at each end of the range, flushing it and increasing the region-to-be-invalidated to cover those in their entirety. (3) Fully discard all the folios covering the range as we want them to be reloaded. (4) Then perform the extent duplication. Thirdly, set i_size after doing the duplicate_extents operation as this value may be used by various things internally. stat() hides the issue because setting ->time to 0 causes cifs_getatr() to revalidate the attributes. These were causing the cifs/001 xfstest to fail. Fixes: 04b38d601239 ("vfs: pull btrfs clone API to vfs layer") Signed-off-by: David Howells Cc: stable@vger.kernel.org cc: Christoph Hellwig cc: Paulo Alcantara cc: Shyam Prasad N cc: Rohith Surabattula cc: Matthew Wilcox cc: Jeff Layton cc: linux-cifs@vger.kernel.org cc: linux-mm@kvack.org Signed-off-by: David Howells Signed-off-by: Steve French --- fs/smb/client/cifsfs.c | 68 ++++++++++++++++++++++++++++++++++++++++++-------- 1 file changed, 57 insertions(+), 11 deletions(-) diff --git a/fs/smb/client/cifsfs.c b/fs/smb/client/cifsfs.c index 8097a9b3e98c..c5fc0a35bb19 100644 --- a/fs/smb/client/cifsfs.c +++ b/fs/smb/client/cifsfs.c @@ -1268,9 +1268,12 @@ static loff_t cifs_remap_file_range(struct file *src_file, loff_t off, { struct inode *src_inode = file_inode(src_file); struct inode *target_inode = file_inode(dst_file); + struct cifsInodeInfo *src_cifsi = CIFS_I(src_inode); + struct cifsInodeInfo *target_cifsi = CIFS_I(target_inode); struct cifsFileInfo *smb_file_src = src_file->private_data; - struct cifsFileInfo *smb_file_target; - struct cifs_tcon *target_tcon; + struct cifsFileInfo *smb_file_target = dst_file->private_data; + struct cifs_tcon *target_tcon, *src_tcon; + unsigned long long destend, fstart, fend, new_size; unsigned int xid; int rc; @@ -1281,13 +1284,13 @@ static loff_t cifs_remap_file_range(struct file *src_file, loff_t off, xid = get_xid(); - if (!src_file->private_data || !dst_file->private_data) { + if (!smb_file_src || !smb_file_target) { rc = -EBADF; cifs_dbg(VFS, "missing cifsFileInfo on copy range src file\n"); goto out; } - smb_file_target = dst_file->private_data; + src_tcon = tlink_tcon(smb_file_src->tlink); target_tcon = tlink_tcon(smb_file_target->tlink); /* @@ -1300,20 +1303,63 @@ static loff_t cifs_remap_file_range(struct file *src_file, loff_t off, if (len == 0) len = src_inode->i_size - off; - cifs_dbg(FYI, "about to flush pages\n"); - /* should we flush first and last page first */ - truncate_inode_pages_range(&target_inode->i_data, destoff, - PAGE_ALIGN(destoff + len)-1); + cifs_dbg(FYI, "clone range\n"); + + /* Flush the source buffer */ + rc = filemap_write_and_wait_range(src_inode->i_mapping, off, + off + len - 1); + if (rc) + goto unlock; + + /* The server-side copy will fail if the source crosses the EOF marker. + * Advance the EOF marker after the flush above to the end of the range + * if it's short of that. + */ + if (src_cifsi->netfs.remote_i_size < off + len) { + rc = cifs_precopy_set_eof(src_inode, src_cifsi, src_tcon, xid, off + len); + if (rc < 0) + goto unlock; + } + + new_size = destoff + len; + destend = destoff + len - 1; - if (target_tcon->ses->server->ops->duplicate_extents) + /* Flush the folios at either end of the destination range to prevent + * accidental loss of dirty data outside of the range. + */ + fstart = destoff; + fend = destend; + + rc = cifs_flush_folio(target_inode, destoff, &fstart, &fend, true); + if (rc) + goto unlock; + rc = cifs_flush_folio(target_inode, destend, &fstart, &fend, false); + if (rc) + goto unlock; + + /* Discard all the folios that overlap the destination region. */ + cifs_dbg(FYI, "about to discard pages %llx-%llx\n", fstart, fend); + truncate_inode_pages_range(&target_inode->i_data, fstart, fend); + + fscache_invalidate(cifs_inode_cookie(target_inode), NULL, + i_size_read(target_inode), 0); + + rc = -EOPNOTSUPP; + if (target_tcon->ses->server->ops->duplicate_extents) { rc = target_tcon->ses->server->ops->duplicate_extents(xid, smb_file_src, smb_file_target, off, len, destoff); - else - rc = -EOPNOTSUPP; + if (rc == 0 && new_size > i_size_read(target_inode)) { + truncate_setsize(target_inode, new_size); + netfs_resize_file(&target_cifsi->netfs, new_size); + fscache_resize_cookie(cifs_inode_cookie(target_inode), + new_size); + } + } /* force revalidate of size and timestamps of target file now that target is updated on the server */ CIFS_I(target_inode)->time = 0; +unlock: /* although unlocking in the reverse order from locking is not strictly necessary here it is a little cleaner to be consistent */ unlock_two_nondirectories(src_inode, target_inode); -- cgit v1.2.3 From c13c823a78b77ea0e5f1f73112d910e259911101 Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Thu, 30 Nov 2023 13:18:29 -0600 Subject: arm64: dts: rockchip: Fix PCI node addresses on rk3399-gru The rk3399-gru PCI node addresses are wrong. In rk3399-gru-scarlet, the bus number in the address should be 0. This is because bus number assignment is dynamic and not known up front. For FDT, the bus number is simply ignored. In rk3399-gru-chromebook, the addresses are simply invalid. The first "reg" entry must be the configuration space for the device. The entry should be all 0s except for device/slot and function numbers. The existing 64-bit memory space (0x83000000) entries are not valid because they must have the BAR address in the lower byte of the first cell. Warnings for these are enabled by adding the missing 'device_type = "pci"' for the root port node. Signed-off-by: Rob Herring Link: https://lore.kernel.org/r/20231130191830.2424361-1-robh@kernel.org Signed-off-by: Heiko Stuebner --- arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi | 3 +-- arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet-dumo.dts | 4 ++-- arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi | 1 + 3 files changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi index 5c1929d41cc0..cacbad35cfc8 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi @@ -509,8 +509,7 @@ ap_i2c_tp: &i2c5 { &pci_rootport { mvl_wifi: wifi@0,0 { compatible = "pci1b4b,2b42"; - reg = <0x83010000 0x0 0x00000000 0x0 0x00100000 - 0x83010000 0x0 0x00100000 0x0 0x00100000>; + reg = <0x0000 0x0 0x0 0x0 0x0>; interrupt-parent = <&gpio0>; interrupts = <8 IRQ_TYPE_LEVEL_LOW>; pinctrl-names = "default"; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet-dumo.dts b/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet-dumo.dts index 853e88455e75..9e4b12ed62cb 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet-dumo.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet-dumo.dts @@ -34,8 +34,8 @@ &pci_rootport { wifi@0,0 { compatible = "qcom,ath10k"; - reg = <0x00010000 0x0 0x00000000 0x0 0x00000000>, - <0x03010010 0x0 0x00000000 0x0 0x00200000>; + reg = <0x00000000 0x0 0x00000000 0x0 0x00000000>, + <0x03000010 0x0 0x00000000 0x0 0x00200000>; qcom,ath10k-calibration-variant = "GO_DUMO"; }; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi index c9bf1d5c3a42..789fd0dcc88b 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi @@ -489,6 +489,7 @@ ap_i2c_audio: &i2c8 { #address-cells = <3>; #size-cells = <2>; ranges; + device_type = "pci"; }; }; -- cgit v1.2.3 From ef6fae4a13aecfa7966edff0445e5c920ad2ddd9 Mon Sep 17 00:00:00 2001 From: Kent Overstreet Date: Fri, 1 Dec 2023 22:31:23 -0500 Subject: bcachefs; Don't use btree write buffer until journal replay is finished The keys being replayed by journal replay have to be synchronized with updates by other threads that overwrite them. We rely on btree node locks for synchronizing - but since btree write buffer updates take no btree locks, that won't work. Instead, simply disable using the btree write buffer until journal replay is finished. This fixes a rare backpointers error in the merge_torture_flakey test. Signed-off-by: Kent Overstreet --- fs/bcachefs/btree_update.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/fs/bcachefs/btree_update.c b/fs/bcachefs/btree_update.c index 324767c0ddcc..25fdca00bf7b 100644 --- a/fs/bcachefs/btree_update.c +++ b/fs/bcachefs/btree_update.c @@ -554,6 +554,19 @@ int __must_check bch2_trans_update_seq(struct btree_trans *trans, u64 seq, BTREE_UPDATE_PREJOURNAL); } +static noinline int bch2_btree_insert_clone_trans(struct btree_trans *trans, + enum btree_id btree, + struct bkey_i *k) +{ + struct bkey_i *n = bch2_trans_kmalloc(trans, bkey_bytes(&k->k)); + int ret = PTR_ERR_OR_ZERO(n); + if (ret) + return ret; + + bkey_copy(n, k); + return bch2_btree_insert_trans(trans, btree, n, 0); +} + int __must_check bch2_trans_update_buffered(struct btree_trans *trans, enum btree_id btree, struct bkey_i *k) @@ -564,6 +577,9 @@ int __must_check bch2_trans_update_buffered(struct btree_trans *trans, EBUG_ON(trans->nr_wb_updates > trans->wb_updates_size); EBUG_ON(k->k.u64s > BTREE_WRITE_BUFERED_U64s_MAX); + if (unlikely(trans->journal_replay_not_finished)) + return bch2_btree_insert_clone_trans(trans, btree, k); + trans_for_each_wb_update(trans, i) { if (i->btree == btree && bpos_eq(i->k.k.p, k->k.p)) { bkey_copy(&i->k, k); -- cgit v1.2.3 From 87b0d8d3d05028c59b64c0287efeca90c28e1152 Mon Sep 17 00:00:00 2001 From: Kent Overstreet Date: Fri, 1 Dec 2023 01:14:50 -0500 Subject: bcachefs: Fix a journal deadlock in replay Recently, journal pre-reservations were removed. They were for reserving space ahead of time in the journal for operations that are required for journal reclaim, e.g. btree key cache flushing and interior node btree updates. Instead we have watermarks - only operations for journal reclaim are allowed when the journal is low on space, and in general we're quite good about doing operations in the order that will free up space in the journal quickest when we're low on space. If we're doing a journal reclaim operation out of order, we usually do it in nonblocking mode if it's not freeing up space at the end of the journal. There's an exceptino though - interior btree node update operations have to be BCH_WATERMARK_reclaim - once they've been started, and they can't be nonblocking. Generally this is fine because they'll only be a very small fraction of transaction commits - but there's an exception, which is during journal replay. Journal replay does many btree operations, but doesn't need to commit them to the journal since they're already in the journal. So killing off of pre-reservation, plus another change to make journal replay more efficient by initially doing the replay in sorted btree order, made it possible for the interior update operations replay generates to fill and deadlock the journal. Fix this by introducing a new check on journal space at the _start_ of an interior update operation. This causes us to block if necessary in exactly the same way as we used to when interior updates took a journal pre-reservaiton, but without all the expensive accounting pre-reservations required. Signed-off-by: Kent Overstreet --- fs/bcachefs/btree_update_interior.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/fs/bcachefs/btree_update_interior.c b/fs/bcachefs/btree_update_interior.c index 6697417273aa..26be38ab6ecb 100644 --- a/fs/bcachefs/btree_update_interior.c +++ b/fs/bcachefs/btree_update_interior.c @@ -1056,6 +1056,17 @@ bch2_btree_update_start(struct btree_trans *trans, struct btree_path *path, flags &= ~BCH_WATERMARK_MASK; flags |= watermark; + if (!(flags & BTREE_INSERT_JOURNAL_RECLAIM) && + watermark < c->journal.watermark) { + struct journal_res res = { 0 }; + + ret = drop_locks_do(trans, + bch2_journal_res_get(&c->journal, &res, 1, + watermark|JOURNAL_RES_GET_CHECK)); + if (ret) + return ERR_PTR(ret); + } + while (1) { nr_nodes[!!update_level] += 1 + split; update_level++; -- cgit v1.2.3 From 131898b0cb4ac6598d3537eeeee2711dec129f51 Mon Sep 17 00:00:00 2001 From: Kent Overstreet Date: Sat, 2 Dec 2023 02:43:58 -0500 Subject: bcachefs: Fix bch2_extent_drop_ptrs() call Also, make bch2_extent_drop_ptrs() safer, so it works with extents and non-extents iterators. Signed-off-by: Kent Overstreet --- fs/bcachefs/data_update.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/bcachefs/data_update.c b/fs/bcachefs/data_update.c index 71aa5e59787b..2418c528c533 100644 --- a/fs/bcachefs/data_update.c +++ b/fs/bcachefs/data_update.c @@ -471,7 +471,7 @@ int bch2_extent_drop_ptrs(struct btree_trans *trans, * we aren't using the extent overwrite path to delete, we're * just using the normal key deletion path: */ - if (bkey_deleted(&n->k)) + if (bkey_deleted(&n->k) && !(iter->flags & BTREE_ITER_IS_EXTENTS)) n->k.size = 0; return bch2_trans_relock(trans) ?: @@ -591,7 +591,7 @@ int bch2_data_update_init(struct btree_trans *trans, m->data_opts.rewrite_ptrs = 0; /* if iter == NULL, it's just a promote */ if (iter) - ret = bch2_extent_drop_ptrs(trans, iter, k, data_opts); + ret = bch2_extent_drop_ptrs(trans, iter, k, m->data_opts); goto done; } -- cgit v1.2.3 From adcf4ee64291b701d083bacf653eb10a4c46acd7 Mon Sep 17 00:00:00 2001 From: Kent Overstreet Date: Mon, 4 Dec 2023 00:38:56 -0500 Subject: bcachefs: Convert compression_stats to for_each_btree_key2 for_each_btree_key2() runs each loop iteration in a btree transaction, and thus does not cause SRCU lock hold time problems. Signed-off-by: Kent Overstreet --- fs/bcachefs/sysfs.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/fs/bcachefs/sysfs.c b/fs/bcachefs/sysfs.c index ab743115f169..f3cb7115b530 100644 --- a/fs/bcachefs/sysfs.c +++ b/fs/bcachefs/sysfs.c @@ -276,8 +276,8 @@ static int bch2_compression_stats_to_text(struct printbuf *out, struct bch_fs *c if (!btree_type_has_ptrs(id)) continue; - for_each_btree_key(trans, iter, id, POS_MIN, - BTREE_ITER_ALL_SNAPSHOTS, k, ret) { + ret = for_each_btree_key2(trans, iter, id, POS_MIN, + BTREE_ITER_ALL_SNAPSHOTS, k, ({ struct bkey_ptrs_c ptrs = bch2_bkey_ptrs_c(k); const union bch_extent_entry *entry; struct extent_ptr_decoded p; @@ -309,8 +309,8 @@ static int bch2_compression_stats_to_text(struct printbuf *out, struct bch_fs *c nr_uncompressed_extents++; else if (compressed) nr_compressed_extents++; - } - bch2_trans_iter_exit(trans, &iter); + 0; + })); } bch2_trans_put(trans); -- cgit v1.2.3 From f88d811a238b12a261a04f125db952cf05c06d0b Mon Sep 17 00:00:00 2001 From: Kent Overstreet Date: Sun, 3 Dec 2023 13:05:21 -0500 Subject: bcachefs: Don't run indirect extent trigger unless inserting/deleting This fixes a transaction path overflow reported in the snapshot deletion path, when moving extents to the correct snapshot. The root of the issue is that creating/deleting a reflink pointer can generate an unbounded number of updates, if it is allowed to reference an unbounded number of indirect extents; to prevent this, merging of reflink pointers has been disabled. But there's a hole, which is that copygc/rebalance may fragment existing extents in the course of moving them around, and if an indirect extent becomes too fragmented we'll then become unable to delete the reflink pointer. The eventual solution is going to be to tweak trigger handling so that we can process large reflink pointers incrementally when necessary, and notice that trigger updates don't need to be run for the part of the reflink pointer not changing. That is going to be a bigger project though, for another patch. Signed-off-by: Kent Overstreet --- fs/bcachefs/reflink.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/fs/bcachefs/reflink.c b/fs/bcachefs/reflink.c index 6e1bfe9feb59..37d16e04e671 100644 --- a/fs/bcachefs/reflink.c +++ b/fs/bcachefs/reflink.c @@ -121,6 +121,14 @@ int bch2_trans_mark_reflink_v(struct btree_trans *trans, { check_indirect_extent_deleting(new, &flags); + if (old.k->type == KEY_TYPE_reflink_v && + new->k.type == KEY_TYPE_reflink_v && + old.k->u64s == new->k.u64s && + !memcmp(bkey_s_c_to_reflink_v(old).v->start, + bkey_i_to_reflink_v(new)->v.start, + bkey_val_bytes(&new->k) - 8)) + return 0; + return bch2_trans_mark_extent(trans, btree_id, level, old, new, flags); } -- cgit v1.2.3 From db3fadacaf0c817b222090290d06ca2a338422d0 Mon Sep 17 00:00:00 2001 From: Daniel Borkmann Date: Fri, 1 Dec 2023 14:10:21 +0100 Subject: packet: Move reference count in packet_sock to atomic_long_t In some potential instances the reference count on struct packet_sock could be saturated and cause overflows which gets the kernel a bit confused. To prevent this, move to a 64-bit atomic reference count on 64-bit architectures to prevent the possibility of this type to overflow. Because we can not handle saturation, using refcount_t is not possible in this place. Maybe someday in the future if it changes it could be used. Also, instead of using plain atomic64_t, use atomic_long_t instead. 32-bit machines tend to be memory-limited (i.e. anything that increases a reference uses so much memory that you can't actually get to 2**32 references). 32-bit architectures also tend to have serious problems with 64-bit atomics. Hence, atomic_long_t is the more natural solution. Reported-by: "The UK's National Cyber Security Centre (NCSC)" Co-developed-by: Greg Kroah-Hartman Signed-off-by: Greg Kroah-Hartman Signed-off-by: Daniel Borkmann Cc: Linus Torvalds Cc: stable@kernel.org Reviewed-by: Willem de Bruijn Reviewed-by: Eric Dumazet Link: https://lore.kernel.org/r/20231201131021.19999-1-daniel@iogearbox.net Signed-off-by: Jakub Kicinski --- net/packet/af_packet.c | 16 ++++++++-------- net/packet/internal.h | 2 +- 2 files changed, 9 insertions(+), 9 deletions(-) diff --git a/net/packet/af_packet.c b/net/packet/af_packet.c index a84e00b5904b..7adf48549a3b 100644 --- a/net/packet/af_packet.c +++ b/net/packet/af_packet.c @@ -4300,7 +4300,7 @@ static void packet_mm_open(struct vm_area_struct *vma) struct sock *sk = sock->sk; if (sk) - atomic_inc(&pkt_sk(sk)->mapped); + atomic_long_inc(&pkt_sk(sk)->mapped); } static void packet_mm_close(struct vm_area_struct *vma) @@ -4310,7 +4310,7 @@ static void packet_mm_close(struct vm_area_struct *vma) struct sock *sk = sock->sk; if (sk) - atomic_dec(&pkt_sk(sk)->mapped); + atomic_long_dec(&pkt_sk(sk)->mapped); } static const struct vm_operations_struct packet_mmap_ops = { @@ -4405,7 +4405,7 @@ static int packet_set_ring(struct sock *sk, union tpacket_req_u *req_u, err = -EBUSY; if (!closing) { - if (atomic_read(&po->mapped)) + if (atomic_long_read(&po->mapped)) goto out; if (packet_read_pending(rb)) goto out; @@ -4508,7 +4508,7 @@ static int packet_set_ring(struct sock *sk, union tpacket_req_u *req_u, err = -EBUSY; mutex_lock(&po->pg_vec_lock); - if (closing || atomic_read(&po->mapped) == 0) { + if (closing || atomic_long_read(&po->mapped) == 0) { err = 0; spin_lock_bh(&rb_queue->lock); swap(rb->pg_vec, pg_vec); @@ -4526,9 +4526,9 @@ static int packet_set_ring(struct sock *sk, union tpacket_req_u *req_u, po->prot_hook.func = (po->rx_ring.pg_vec) ? tpacket_rcv : packet_rcv; skb_queue_purge(rb_queue); - if (atomic_read(&po->mapped)) - pr_err("packet_mmap: vma is busy: %d\n", - atomic_read(&po->mapped)); + if (atomic_long_read(&po->mapped)) + pr_err("packet_mmap: vma is busy: %ld\n", + atomic_long_read(&po->mapped)); } mutex_unlock(&po->pg_vec_lock); @@ -4606,7 +4606,7 @@ static int packet_mmap(struct file *file, struct socket *sock, } } - atomic_inc(&po->mapped); + atomic_long_inc(&po->mapped); vma->vm_ops = &packet_mmap_ops; err = 0; diff --git a/net/packet/internal.h b/net/packet/internal.h index d29c94c45159..d5d70712007a 100644 --- a/net/packet/internal.h +++ b/net/packet/internal.h @@ -122,7 +122,7 @@ struct packet_sock { __be16 num; struct packet_rollover *rollover; struct packet_mclist *mclist; - atomic_t mapped; + atomic_long_t mapped; enum tpacket_versions tp_version; unsigned int tp_hdrlen; unsigned int tp_reserve; -- cgit v1.2.3 From 4fbc3a52cd4d14de3793f4b2c721d7306ea84cf9 Mon Sep 17 00:00:00 2001 From: Mike Marciniszyn Date: Wed, 29 Nov 2023 14:21:41 -0600 Subject: RDMA/core: Fix umem iterator when PAGE_SIZE is greater then HCA pgsz 64k pages introduce the situation in this diagram when the HCA 4k page size is being used: +-------------------------------------------+ <--- 64k aligned VA | | | HCA 4k page | | | +-------------------------------------------+ | o | | | | o | | | | o | +-------------------------------------------+ | | | HCA 4k page | | | +-------------------------------------------+ <--- Live HCA page |OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO| <--- offset | | <--- VA | MR data | +-------------------------------------------+ | | | HCA 4k page | | | +-------------------------------------------+ | o | | | | o | | | | o | +-------------------------------------------+ | | | HCA 4k page | | | +-------------------------------------------+ The VA addresses are coming from rdma-core in this diagram can be arbitrary, but for 64k pages, the VA may be offset by some number of HCA 4k pages and followed by some number of HCA 4k pages. The current iterator doesn't account for either the preceding 4k pages or the following 4k pages. Fix the issue by extending the ib_block_iter to contain the number of DMA pages like comment [1] says and by using __sg_advance to start the iterator at the first live HCA page. The changes are contained in a parallel set of iterator start and next functions that are umem aware and specific to umem since there is one user of the rdma_for_each_block() without umem. These two fixes prevents the extra pages before and after the user MR data. Fix the preceding pages by using the __sq_advance field to start at the first 4k page containing MR data. Fix the following pages by saving the number of pgsz blocks in the iterator state and downcounting on each next. This fix allows for the elimination of the small page crutch noted in the Fixes. Fixes: 10c75ccb54e4 ("RDMA/umem: Prevent small pages from being returned by ib_umem_find_best_pgsz()") Link: https://lore.kernel.org/r/20231129202143.1434-2-shiraz.saleem@intel.com Signed-off-by: Mike Marciniszyn Signed-off-by: Shiraz Saleem Reviewed-by: Jason Gunthorpe Signed-off-by: Jason Gunthorpe --- drivers/infiniband/core/umem.c | 6 ------ include/rdma/ib_umem.h | 9 ++++++++- include/rdma/ib_verbs.h | 1 + 3 files changed, 9 insertions(+), 7 deletions(-) diff --git a/drivers/infiniband/core/umem.c b/drivers/infiniband/core/umem.c index f9ab671c8eda..07c571c7b699 100644 --- a/drivers/infiniband/core/umem.c +++ b/drivers/infiniband/core/umem.c @@ -96,12 +96,6 @@ unsigned long ib_umem_find_best_pgsz(struct ib_umem *umem, return page_size; } - /* rdma_for_each_block() has a bug if the page size is smaller than the - * page size used to build the umem. For now prevent smaller page sizes - * from being returned. - */ - pgsz_bitmap &= GENMASK(BITS_PER_LONG - 1, PAGE_SHIFT); - /* The best result is the smallest page size that results in the minimum * number of required pages. Compute the largest page size that could * work based on VA address bits that don't change. diff --git a/include/rdma/ib_umem.h b/include/rdma/ib_umem.h index 95896472a82b..565a85044541 100644 --- a/include/rdma/ib_umem.h +++ b/include/rdma/ib_umem.h @@ -77,6 +77,13 @@ static inline void __rdma_umem_block_iter_start(struct ib_block_iter *biter, { __rdma_block_iter_start(biter, umem->sgt_append.sgt.sgl, umem->sgt_append.sgt.nents, pgsz); + biter->__sg_advance = ib_umem_offset(umem) & ~(pgsz - 1); + biter->__sg_numblocks = ib_umem_num_dma_blocks(umem, pgsz); +} + +static inline bool __rdma_umem_block_iter_next(struct ib_block_iter *biter) +{ + return __rdma_block_iter_next(biter) && biter->__sg_numblocks--; } /** @@ -92,7 +99,7 @@ static inline void __rdma_umem_block_iter_start(struct ib_block_iter *biter, */ #define rdma_umem_for_each_dma_block(umem, biter, pgsz) \ for (__rdma_umem_block_iter_start(biter, umem, pgsz); \ - __rdma_block_iter_next(biter);) + __rdma_umem_block_iter_next(biter);) #ifdef CONFIG_INFINIBAND_USER_MEM diff --git a/include/rdma/ib_verbs.h b/include/rdma/ib_verbs.h index fb1a2d6b1969..b7b6b58dd348 100644 --- a/include/rdma/ib_verbs.h +++ b/include/rdma/ib_verbs.h @@ -2850,6 +2850,7 @@ struct ib_block_iter { /* internal states */ struct scatterlist *__sg; /* sg holding the current aligned block */ dma_addr_t __dma_addr; /* unaligned DMA address of this block */ + size_t __sg_numblocks; /* ib_umem_num_dma_blocks() */ unsigned int __sg_nents; /* number of SG entries */ unsigned int __sg_advance; /* number of bytes to advance in sg in next step */ unsigned int __pg_bit; /* alignment of current block */ -- cgit v1.2.3 From 0a5ec366de7e94192669ba08de6ed336607fd282 Mon Sep 17 00:00:00 2001 From: Mike Marciniszyn Date: Wed, 29 Nov 2023 14:21:42 -0600 Subject: RDMA/irdma: Ensure iWarp QP queue memory is OS paged aligned The SQ is shared for between kernel and used by storing the kernel page pointer and passing that to a kmap_atomic(). This then requires that the alignment is PAGE_SIZE aligned. Fix by adding an iWarp specific alignment check. Fixes: e965ef0e7b2c ("RDMA/irdma: Split QP handler into irdma_reg_user_mr_type_qp") Link: https://lore.kernel.org/r/20231129202143.1434-3-shiraz.saleem@intel.com Signed-off-by: Mike Marciniszyn Signed-off-by: Shiraz Saleem Signed-off-by: Jason Gunthorpe --- drivers/infiniband/hw/irdma/verbs.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/infiniband/hw/irdma/verbs.c b/drivers/infiniband/hw/irdma/verbs.c index 5fa88e6cca4e..fb9088392b19 100644 --- a/drivers/infiniband/hw/irdma/verbs.c +++ b/drivers/infiniband/hw/irdma/verbs.c @@ -2946,6 +2946,11 @@ static int irdma_reg_user_mr_type_qp(struct irdma_mem_reg_req req, int err; u8 lvl; + /* iWarp: Catch page not starting on OS page boundary */ + if (!rdma_protocol_roce(&iwdev->ibdev, 1) && + ib_umem_offset(iwmr->region)) + return -EINVAL; + total = req.sq_pages + req.rq_pages + 1; if (total > iwmr->page_cnt) return -EINVAL; -- cgit v1.2.3 From 03769f72d66edab82484449ed594cb6b00ae0223 Mon Sep 17 00:00:00 2001 From: Mike Marciniszyn Date: Wed, 29 Nov 2023 14:21:43 -0600 Subject: RDMA/irdma: Fix support for 64k pages Virtual QP and CQ require a 4K HW page size but the driver passes PAGE_SIZE to ib_umem_find_best_pgsz() instead. Fix this by using the appropriate 4k value in the bitmap passed to ib_umem_find_best_pgsz(). Fixes: 693a5386eff0 ("RDMA/irdma: Split mr alloc and free into new functions") Link: https://lore.kernel.org/r/20231129202143.1434-4-shiraz.saleem@intel.com Signed-off-by: Mike Marciniszyn Signed-off-by: Shiraz Saleem Signed-off-by: Jason Gunthorpe --- drivers/infiniband/hw/irdma/verbs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/infiniband/hw/irdma/verbs.c b/drivers/infiniband/hw/irdma/verbs.c index fb9088392b19..b5eb8d421988 100644 --- a/drivers/infiniband/hw/irdma/verbs.c +++ b/drivers/infiniband/hw/irdma/verbs.c @@ -2914,7 +2914,7 @@ static struct irdma_mr *irdma_alloc_iwmr(struct ib_umem *region, iwmr->type = reg_type; pgsz_bitmap = (reg_type == IRDMA_MEMREG_TYPE_MEM) ? - iwdev->rf->sc_dev.hw_attrs.page_size_cap : PAGE_SIZE; + iwdev->rf->sc_dev.hw_attrs.page_size_cap : SZ_4K; iwmr->page_size = ib_umem_find_best_pgsz(region, pgsz_bitmap, virt); if (unlikely(!iwmr->page_size)) { -- cgit v1.2.3 From e3e82fcb79eeb3f1a88a89f676831773caff514a Mon Sep 17 00:00:00 2001 From: Shifeng Li Date: Thu, 30 Nov 2023 00:14:15 -0800 Subject: RDMA/irdma: Avoid free the non-cqp_request scratch When creating ceq_0 during probing irdma, cqp.sc_cqp will be sent as a cqp_request to cqp->sc_cqp.sq_ring. If the request is pending when removing the irdma driver or unplugging its aux device, cqp.sc_cqp will be dereferenced as wrong struct in irdma_free_pending_cqp_request(). PID: 3669 TASK: ffff88aef892c000 CPU: 28 COMMAND: "kworker/28:0" #0 [fffffe0000549e38] crash_nmi_callback at ffffffff810e3a34 #1 [fffffe0000549e40] nmi_handle at ffffffff810788b2 #2 [fffffe0000549ea0] default_do_nmi at ffffffff8107938f #3 [fffffe0000549eb8] do_nmi at ffffffff81079582 #4 [fffffe0000549ef0] end_repeat_nmi at ffffffff82e016b4 [exception RIP: native_queued_spin_lock_slowpath+1291] RIP: ffffffff8127e72b RSP: ffff88aa841ef778 RFLAGS: 00000046 RAX: 0000000000000000 RBX: ffff88b01f849700 RCX: ffffffff8127e47e RDX: 0000000000000000 RSI: 0000000000000004 RDI: ffffffff83857ec0 RBP: ffff88afe3e4efc8 R8: ffffed15fc7c9dfa R9: ffffed15fc7c9dfa R10: 0000000000000001 R11: ffffed15fc7c9df9 R12: 0000000000740000 R13: ffff88b01f849708 R14: 0000000000000003 R15: ffffed1603f092e1 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0000 -- -- #5 [ffff88aa841ef778] native_queued_spin_lock_slowpath at ffffffff8127e72b #6 [ffff88aa841ef7b0] _raw_spin_lock_irqsave at ffffffff82c22aa4 #7 [ffff88aa841ef7c8] __wake_up_common_lock at ffffffff81257363 #8 [ffff88aa841ef888] irdma_free_pending_cqp_request at ffffffffa0ba12cc [irdma] #9 [ffff88aa841ef958] irdma_cleanup_pending_cqp_op at ffffffffa0ba1469 [irdma] #10 [ffff88aa841ef9c0] irdma_ctrl_deinit_hw at ffffffffa0b2989f [irdma] #11 [ffff88aa841efa28] irdma_remove at ffffffffa0b252df [irdma] #12 [ffff88aa841efae8] auxiliary_bus_remove at ffffffff8219afdb #13 [ffff88aa841efb00] device_release_driver_internal at ffffffff821882e6 #14 [ffff88aa841efb38] bus_remove_device at ffffffff82184278 #15 [ffff88aa841efb88] device_del at ffffffff82179d23 #16 [ffff88aa841efc48] ice_unplug_aux_dev at ffffffffa0eb1c14 [ice] #17 [ffff88aa841efc68] ice_service_task at ffffffffa0d88201 [ice] #18 [ffff88aa841efde8] process_one_work at ffffffff811c589a #19 [ffff88aa841efe60] worker_thread at ffffffff811c71ff #20 [ffff88aa841eff10] kthread at ffffffff811d87a0 #21 [ffff88aa841eff50] ret_from_fork at ffffffff82e0022f Fixes: 44d9e52977a1 ("RDMA/irdma: Implement device initialization definitions") Link: https://lore.kernel.org/r/20231130081415.891006-1-lishifeng@sangfor.com.cn Suggested-by: "Ismail, Mustafa" Signed-off-by: Shifeng Li Reviewed-by: Shiraz Saleem Signed-off-by: Jason Gunthorpe --- drivers/infiniband/hw/irdma/hw.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/drivers/infiniband/hw/irdma/hw.c b/drivers/infiniband/hw/irdma/hw.c index 64a382070e5c..bd4b2b896444 100644 --- a/drivers/infiniband/hw/irdma/hw.c +++ b/drivers/infiniband/hw/irdma/hw.c @@ -1184,7 +1184,6 @@ static int irdma_create_ceq(struct irdma_pci_f *rf, struct irdma_ceq *iwceq, int status; struct irdma_ceq_init_info info = {}; struct irdma_sc_dev *dev = &rf->sc_dev; - u64 scratch; u32 ceq_size; info.ceq_id = ceq_id; @@ -1205,14 +1204,13 @@ static int irdma_create_ceq(struct irdma_pci_f *rf, struct irdma_ceq *iwceq, iwceq->sc_ceq.ceq_id = ceq_id; info.dev = dev; info.vsi = vsi; - scratch = (uintptr_t)&rf->cqp.sc_cqp; status = irdma_sc_ceq_init(&iwceq->sc_ceq, &info); if (!status) { if (dev->ceq_valid) status = irdma_cqp_ceq_cmd(&rf->sc_dev, &iwceq->sc_ceq, IRDMA_OP_CEQ_CREATE); else - status = irdma_sc_cceq_create(&iwceq->sc_ceq, scratch); + status = irdma_sc_cceq_create(&iwceq->sc_ceq, 0); } if (status) { -- cgit v1.2.3 From fcc9b50e5517f7d65cdc33d81f223b22536f863f Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Tue, 5 Dec 2023 09:10:01 +0900 Subject: Revert "greybus: gb-beagleplay: Ensure le for values in transport" This reverts commit 52eb67861ebeb2110318bd9fe33d85ddcf92aac7. Turns out to not be correct, a new version will be generated later. Link: https://lore.kernel.org/r/20231204131008.384583-1-ayushdevel1325@gmail.com Cc: Ayush Singh Signed-off-by: Greg Kroah-Hartman --- drivers/greybus/gb-beagleplay.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) diff --git a/drivers/greybus/gb-beagleplay.c b/drivers/greybus/gb-beagleplay.c index 1e70ff7e3da4..43318c1993ba 100644 --- a/drivers/greybus/gb-beagleplay.c +++ b/drivers/greybus/gb-beagleplay.c @@ -93,9 +93,9 @@ static void hdlc_rx_greybus_frame(struct gb_beagleplay *bg, u8 *buf, u16 len) memcpy(&cport_id, hdr->pad, sizeof(cport_id)); dev_dbg(&bg->sd->dev, "Greybus Operation %u type %X cport %u status %u received", - hdr->operation_id, hdr->type, le16_to_cpu(cport_id), hdr->result); + hdr->operation_id, hdr->type, cport_id, hdr->result); - greybus_data_rcvd(bg->gb_hd, le16_to_cpu(cport_id), buf, len); + greybus_data_rcvd(bg->gb_hd, cport_id, buf, len); } static void hdlc_rx_dbg_frame(const struct gb_beagleplay *bg, const char *buf, u16 len) @@ -340,15 +340,14 @@ static int gb_message_send(struct gb_host_device *hd, u16 cport, struct gb_messa { struct gb_beagleplay *bg = dev_get_drvdata(&hd->dev); struct hdlc_payload payloads[2]; - __le16 cport_id = le16_to_cpu(cport); dev_dbg(&hd->dev, "Sending greybus message with Operation %u, Type: %X on Cport %u", msg->header->operation_id, msg->header->type, cport); - if (le16_to_cpu(msg->header->size) > RX_HDLC_PAYLOAD) + if (msg->header->size > RX_HDLC_PAYLOAD) return dev_err_probe(&hd->dev, -E2BIG, "Greybus message too big"); - memcpy(msg->header->pad, &cport_id, sizeof(cport_id)); + memcpy(msg->header->pad, &cport, sizeof(cport)); payloads[0].buf = msg->header; payloads[0].len = sizeof(*msg->header); -- cgit v1.2.3 From e05501e8a84eee4f819f31b9ce663bddd01b3b69 Mon Sep 17 00:00:00 2001 From: Dave Jiang Date: Mon, 6 Nov 2023 10:26:45 -0700 Subject: cxl: Add cxl_num_decoders_committed() usage to cxl_test Commit 458ba8189cb4 ("cxl: Add cxl_decoders_committed() helper") missed the conversion for cxl_test. Add usage of cxl_num_decoders_committed() to replace the open coding. Suggested-by: Alison Schofield Signed-off-by: Dave Jiang Reviewed-by: Fan Ni Link: https://lore.kernel.org/r/169929160525.824083.11813222229025394254.stgit@djiang5-mobl3 Signed-off-by: Dan Williams --- tools/testing/cxl/Kbuild | 1 + tools/testing/cxl/cxl_core_exports.c | 7 +++++++ tools/testing/cxl/test/cxl.c | 5 +++-- 3 files changed, 11 insertions(+), 2 deletions(-) create mode 100644 tools/testing/cxl/cxl_core_exports.c diff --git a/tools/testing/cxl/Kbuild b/tools/testing/cxl/Kbuild index 90f3c9802ffb..95dc58b94178 100644 --- a/tools/testing/cxl/Kbuild +++ b/tools/testing/cxl/Kbuild @@ -62,5 +62,6 @@ cxl_core-$(CONFIG_TRACING) += $(CXL_CORE_SRC)/trace.o cxl_core-$(CONFIG_CXL_REGION) += $(CXL_CORE_SRC)/region.o cxl_core-y += config_check.o cxl_core-y += cxl_core_test.o +cxl_core-y += cxl_core_exports.o obj-m += test/ diff --git a/tools/testing/cxl/cxl_core_exports.c b/tools/testing/cxl/cxl_core_exports.c new file mode 100644 index 000000000000..077e6883921d --- /dev/null +++ b/tools/testing/cxl/cxl_core_exports.c @@ -0,0 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0 +/* Copyright(c) 2022 Intel Corporation. All rights reserved. */ + +#include "cxl.h" + +/* Exporting of cxl_core symbols that are only used by cxl_test */ +EXPORT_SYMBOL_NS_GPL(cxl_num_decoders_committed, CXL); diff --git a/tools/testing/cxl/test/cxl.c b/tools/testing/cxl/test/cxl.c index b88546299902..f4e517a0c774 100644 --- a/tools/testing/cxl/test/cxl.c +++ b/tools/testing/cxl/test/cxl.c @@ -669,10 +669,11 @@ static int mock_decoder_commit(struct cxl_decoder *cxld) return 0; dev_dbg(&port->dev, "%s commit\n", dev_name(&cxld->dev)); - if (port->commit_end + 1 != id) { + if (cxl_num_decoders_committed(port) != id) { dev_dbg(&port->dev, "%s: out of order commit, expected decoder%d.%d\n", - dev_name(&cxld->dev), port->id, port->commit_end + 1); + dev_name(&cxld->dev), port->id, + cxl_num_decoders_committed(port)); return -EBUSY; } -- cgit v1.2.3 From 659aa050a53817157b7459529538598a6449c1d3 Mon Sep 17 00:00:00 2001 From: Alison Schofield Date: Mon, 13 Nov 2023 14:13:24 -0800 Subject: kernel/resource: Increment by align value in get_free_mem_region() Currently get_free_mem_region() searches for available capacity in increments equal to the region size being requested. This can cause the search to take giant steps through the resource leaving needless gaps and missing available space. Specifically 'cxl create-region' fails with ERANGE even though capacity of the given size and CXL's expected 256M x InterleaveWays alignment can be satisfied. Replace the total-request-size increment with a next alignment increment so that the next possible address is always examined for availability. Fixes: 14b80582c43e ("resource: Introduce alloc_free_mem_region()") Reported-by: Dmytro Adamenko Reported-by: Dan Williams Signed-off-by: Alison Schofield Reviewed-by: Dave Jiang Link: https://lore.kernel.org/r/20231113221324.1118092-1-alison.schofield@intel.com Cc: Jason Gunthorpe Reviewed-by: Christoph Hellwig Signed-off-by: Dan Williams --- kernel/resource.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/kernel/resource.c b/kernel/resource.c index 866ef3663a0b..91be1bc50b60 100644 --- a/kernel/resource.c +++ b/kernel/resource.c @@ -1844,8 +1844,8 @@ get_free_mem_region(struct device *dev, struct resource *base, write_lock(&resource_lock); for (addr = gfr_start(base, size, align, flags); - gfr_continue(base, addr, size, flags); - addr = gfr_next(addr, size, flags)) { + gfr_continue(base, addr, align, flags); + addr = gfr_next(addr, align, flags)) { if (__region_intersects(base, addr, size, 0, IORES_DESC_NONE) != REGION_DISJOINT) continue; -- cgit v1.2.3 From 6b17a597fc2f13aaaa0a2780eb7edb9ae7ac9aea Mon Sep 17 00:00:00 2001 From: Thomas Reichinger Date: Thu, 30 Nov 2023 12:35:03 +0100 Subject: arcnet: restoring support for multiple Sohard Arcnet cards Probe of Sohard Arcnet cards fails, if 2 or more cards are installed in a system. See kernel log: [ 2.759203] arcnet: arcnet loaded [ 2.763648] arcnet:com20020: COM20020 chipset support (by David Woodhouse et al.) [ 2.770585] arcnet:com20020_pci: COM20020 PCI support [ 2.772295] com20020 0000:02:00.0: enabling device (0000 -> 0003) [ 2.772354] (unnamed net_device) (uninitialized): PLX-PCI Controls ... [ 3.071301] com20020 0000:02:00.0 arc0-0 (uninitialized): PCI COM20020: station FFh found at F080h, IRQ 101. [ 3.071305] com20020 0000:02:00.0 arc0-0 (uninitialized): Using CKP 64 - data rate 2.5 Mb/s [ 3.071534] com20020 0000:07:00.0: enabling device (0000 -> 0003) [ 3.071581] (unnamed net_device) (uninitialized): PLX-PCI Controls ... [ 3.369501] com20020 0000:07:00.0: Led pci:green:tx:0-0 renamed to pci:green:tx:0-0_1 due to name collision [ 3.369535] com20020 0000:07:00.0: Led pci:red:recon:0-0 renamed to pci:red:recon:0-0_1 due to name collision [ 3.370586] com20020 0000:07:00.0 arc0-0 (uninitialized): PCI COM20020: station E1h found at C000h, IRQ 35. [ 3.370589] com20020 0000:07:00.0 arc0-0 (uninitialized): Using CKP 64 - data rate 2.5 Mb/s [ 3.370608] com20020: probe of 0000:07:00.0 failed with error -5 commit 5ef216c1f848 ("arcnet: com20020-pci: add rotary index support") changes the device name of all COM20020 based PCI cards, even if only some cards support this: snprintf(dev->name, sizeof(dev->name), "arc%d-%d", dev->dev_id, i); The error happens because all Sohard Arcnet cards would be called arc0-0, since the Sohard Arcnet cards don't have a PLX rotary coder. I.e. EAE Arcnet cards have a PLX rotary coder, which sets the first decimal, ensuring unique devices names. This patch adds two new card feature flags to indicate which cards support LEDs and the PLX rotary coder. For EAE based cards the names still depend on the PLX rotary coder (untested, since missing EAE hardware). For Sohard based cards, this patch will result in devices being called arc0, arc1, ... (tested). Signed-off-by: Thomas Reichinger Fixes: 5ef216c1f848 ("arcnet: com20020-pci: add rotary index support") Link: https://lore.kernel.org/r/20231130113503.6812-1-thomas.reichinger@sohard.de Signed-off-by: Jakub Kicinski --- drivers/net/arcnet/arcdevice.h | 2 + drivers/net/arcnet/com20020-pci.c | 89 ++++++++++++++++++++------------------- 2 files changed, 48 insertions(+), 43 deletions(-) diff --git a/drivers/net/arcnet/arcdevice.h b/drivers/net/arcnet/arcdevice.h index 19e996a829c9..b54275389f8a 100644 --- a/drivers/net/arcnet/arcdevice.h +++ b/drivers/net/arcnet/arcdevice.h @@ -186,6 +186,8 @@ do { \ #define ARC_IS_5MBIT 1 /* card default speed is 5MBit */ #define ARC_CAN_10MBIT 2 /* card uses COM20022, supporting 10MBit, but default is 2.5MBit. */ +#define ARC_HAS_LED 4 /* card has software controlled LEDs */ +#define ARC_HAS_ROTARY 8 /* card has rotary encoder */ /* information needed to define an encapsulation driver */ struct ArcProto { diff --git a/drivers/net/arcnet/com20020-pci.c b/drivers/net/arcnet/com20020-pci.c index c580acb8b1d3..7b5c8bb02f11 100644 --- a/drivers/net/arcnet/com20020-pci.c +++ b/drivers/net/arcnet/com20020-pci.c @@ -213,12 +213,13 @@ static int com20020pci_probe(struct pci_dev *pdev, if (!strncmp(ci->name, "EAE PLX-PCI FB2", 15)) lp->backplane = 1; - /* Get the dev_id from the PLX rotary coder */ - if (!strncmp(ci->name, "EAE PLX-PCI MA1", 15)) - dev_id_mask = 0x3; - dev->dev_id = (inb(priv->misc + ci->rotary) >> 4) & dev_id_mask; - - snprintf(dev->name, sizeof(dev->name), "arc%d-%d", dev->dev_id, i); + if (ci->flags & ARC_HAS_ROTARY) { + /* Get the dev_id from the PLX rotary coder */ + if (!strncmp(ci->name, "EAE PLX-PCI MA1", 15)) + dev_id_mask = 0x3; + dev->dev_id = (inb(priv->misc + ci->rotary) >> 4) & dev_id_mask; + snprintf(dev->name, sizeof(dev->name), "arc%d-%d", dev->dev_id, i); + } if (arcnet_inb(ioaddr, COM20020_REG_R_STATUS) == 0xFF) { pr_err("IO address %Xh is empty!\n", ioaddr); @@ -230,6 +231,10 @@ static int com20020pci_probe(struct pci_dev *pdev, goto err_free_arcdev; } + ret = com20020_found(dev, IRQF_SHARED); + if (ret) + goto err_free_arcdev; + card = devm_kzalloc(&pdev->dev, sizeof(struct com20020_dev), GFP_KERNEL); if (!card) { @@ -239,41 +244,39 @@ static int com20020pci_probe(struct pci_dev *pdev, card->index = i; card->pci_priv = priv; - card->tx_led.brightness_set = led_tx_set; - card->tx_led.default_trigger = devm_kasprintf(&pdev->dev, - GFP_KERNEL, "arc%d-%d-tx", - dev->dev_id, i); - card->tx_led.name = devm_kasprintf(&pdev->dev, GFP_KERNEL, - "pci:green:tx:%d-%d", - dev->dev_id, i); - - card->tx_led.dev = &dev->dev; - card->recon_led.brightness_set = led_recon_set; - card->recon_led.default_trigger = devm_kasprintf(&pdev->dev, - GFP_KERNEL, "arc%d-%d-recon", - dev->dev_id, i); - card->recon_led.name = devm_kasprintf(&pdev->dev, GFP_KERNEL, - "pci:red:recon:%d-%d", - dev->dev_id, i); - card->recon_led.dev = &dev->dev; - card->dev = dev; - - ret = devm_led_classdev_register(&pdev->dev, &card->tx_led); - if (ret) - goto err_free_arcdev; - ret = devm_led_classdev_register(&pdev->dev, &card->recon_led); - if (ret) - goto err_free_arcdev; - - dev_set_drvdata(&dev->dev, card); - - ret = com20020_found(dev, IRQF_SHARED); - if (ret) - goto err_free_arcdev; - - devm_arcnet_led_init(dev, dev->dev_id, i); + if (ci->flags & ARC_HAS_LED) { + card->tx_led.brightness_set = led_tx_set; + card->tx_led.default_trigger = devm_kasprintf(&pdev->dev, + GFP_KERNEL, "arc%d-%d-tx", + dev->dev_id, i); + card->tx_led.name = devm_kasprintf(&pdev->dev, GFP_KERNEL, + "pci:green:tx:%d-%d", + dev->dev_id, i); + + card->tx_led.dev = &dev->dev; + card->recon_led.brightness_set = led_recon_set; + card->recon_led.default_trigger = devm_kasprintf(&pdev->dev, + GFP_KERNEL, "arc%d-%d-recon", + dev->dev_id, i); + card->recon_led.name = devm_kasprintf(&pdev->dev, GFP_KERNEL, + "pci:red:recon:%d-%d", + dev->dev_id, i); + card->recon_led.dev = &dev->dev; + + ret = devm_led_classdev_register(&pdev->dev, &card->tx_led); + if (ret) + goto err_free_arcdev; + + ret = devm_led_classdev_register(&pdev->dev, &card->recon_led); + if (ret) + goto err_free_arcdev; + + dev_set_drvdata(&dev->dev, card); + devm_arcnet_led_init(dev, dev->dev_id, i); + } + card->dev = dev; list_add(&card->list, &priv->list_dev); continue; @@ -329,7 +332,7 @@ static struct com20020_pci_card_info card_info_5mbit = { }; static struct com20020_pci_card_info card_info_sohard = { - .name = "PLX-PCI", + .name = "SOHARD SH ARC-PCI", .devcount = 1, /* SOHARD needs PCI base addr 4 */ .chan_map_tbl = { @@ -364,7 +367,7 @@ static struct com20020_pci_card_info card_info_eae_arc1 = { }, }, .rotary = 0x0, - .flags = ARC_CAN_10MBIT, + .flags = ARC_HAS_ROTARY | ARC_HAS_LED | ARC_CAN_10MBIT, }; static struct com20020_pci_card_info card_info_eae_ma1 = { @@ -396,7 +399,7 @@ static struct com20020_pci_card_info card_info_eae_ma1 = { }, }, .rotary = 0x0, - .flags = ARC_CAN_10MBIT, + .flags = ARC_HAS_ROTARY | ARC_HAS_LED | ARC_CAN_10MBIT, }; static struct com20020_pci_card_info card_info_eae_fb2 = { @@ -421,7 +424,7 @@ static struct com20020_pci_card_info card_info_eae_fb2 = { }, }, .rotary = 0x0, - .flags = ARC_CAN_10MBIT, + .flags = ARC_HAS_ROTARY | ARC_HAS_LED | ARC_CAN_10MBIT, }; static const struct pci_device_id com20020pci_id_table[] = { -- cgit v1.2.3 From adbf100fc47001c93d7e513ecac6fd6e04d5b4a1 Mon Sep 17 00:00:00 2001 From: Naveen Mamindlapalli Date: Fri, 1 Dec 2023 11:03:30 +0530 Subject: octeontx2-pf: consider both Rx and Tx packet stats for adaptive interrupt coalescing The current adaptive interrupt coalescing code updates only rx packet stats for dim algorithm. This patch also updates tx packet stats which will be useful when there is only tx traffic. Also moved configuring hardware adaptive interrupt setting to driver dim callback. Fixes: 6e144b47f560 ("octeontx2-pf: Add support for adaptive interrupt coalescing") Signed-off-by: Naveen Mamindlapalli Signed-off-by: Suman Ghosh Reviewed-by: Wojciech Drewek Link: https://lore.kernel.org/r/20231201053330.3903694-1-sumang@marvell.com Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c | 9 +++++++++ .../net/ethernet/marvell/octeontx2/nic/otx2_txrx.c | 20 ++++++++++---------- 2 files changed, 19 insertions(+), 10 deletions(-) diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c index 532e324bdcc8..0c17ebdda148 100644 --- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c +++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c @@ -1688,6 +1688,14 @@ static void otx2_do_set_rx_mode(struct otx2_nic *pf) mutex_unlock(&pf->mbox.lock); } +static void otx2_set_irq_coalesce(struct otx2_nic *pfvf) +{ + int cint; + + for (cint = 0; cint < pfvf->hw.cint_cnt; cint++) + otx2_config_irq_coalescing(pfvf, cint); +} + static void otx2_dim_work(struct work_struct *w) { struct dim_cq_moder cur_moder; @@ -1703,6 +1711,7 @@ static void otx2_dim_work(struct work_struct *w) CQ_TIMER_THRESH_MAX : cur_moder.usec; pfvf->hw.cq_ecount_wait = (cur_moder.pkts > NAPI_POLL_WEIGHT) ? NAPI_POLL_WEIGHT : cur_moder.pkts; + otx2_set_irq_coalesce(pfvf); dim->state = DIM_START_MEASURE; } diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_txrx.c b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_txrx.c index 6ee15f3c25ed..4d519ea833b2 100644 --- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_txrx.c +++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_txrx.c @@ -512,11 +512,18 @@ static void otx2_adjust_adaptive_coalese(struct otx2_nic *pfvf, struct otx2_cq_p { struct dim_sample dim_sample; u64 rx_frames, rx_bytes; + u64 tx_frames, tx_bytes; rx_frames = OTX2_GET_RX_STATS(RX_BCAST) + OTX2_GET_RX_STATS(RX_MCAST) + OTX2_GET_RX_STATS(RX_UCAST); rx_bytes = OTX2_GET_RX_STATS(RX_OCTS); - dim_update_sample(pfvf->napi_events, rx_frames, rx_bytes, &dim_sample); + tx_bytes = OTX2_GET_TX_STATS(TX_OCTS); + tx_frames = OTX2_GET_TX_STATS(TX_UCAST); + + dim_update_sample(pfvf->napi_events, + rx_frames + tx_frames, + rx_bytes + tx_bytes, + &dim_sample); net_dim(&cq_poll->dim, dim_sample); } @@ -558,16 +565,9 @@ int otx2_napi_handler(struct napi_struct *napi, int budget) if (pfvf->flags & OTX2_FLAG_INTF_DOWN) return workdone; - /* Check for adaptive interrupt coalesce */ - if (workdone != 0 && - ((pfvf->flags & OTX2_FLAG_ADPTV_INT_COAL_ENABLED) == - OTX2_FLAG_ADPTV_INT_COAL_ENABLED)) { - /* Adjust irq coalese using net_dim */ + /* Adjust irq coalese using net_dim */ + if (pfvf->flags & OTX2_FLAG_ADPTV_INT_COAL_ENABLED) otx2_adjust_adaptive_coalese(pfvf, cq_poll); - /* Update irq coalescing */ - for (i = 0; i < pfvf->hw.cint_cnt; i++) - otx2_config_irq_coalescing(pfvf, i); - } if (unlikely(!filled_cnt)) { struct refill_work *work; -- cgit v1.2.3 From 37e4b8df27bc68340f3fc80dbb27e3549c7f881c Mon Sep 17 00:00:00 2001 From: Jianheng Zhang Date: Fri, 1 Dec 2023 03:22:03 +0000 Subject: net: stmmac: fix FPE events losing The status bits of register MAC_FPE_CTRL_STS are clear on read. Using 32-bit read for MAC_FPE_CTRL_STS in dwmac5_fpe_configure() and dwmac5_fpe_send_mpacket() clear the status bits. Then the stmmac interrupt handler missing FPE event status and leads to FPE handshaking failure and retries. To avoid clear status bits of MAC_FPE_CTRL_STS in dwmac5_fpe_configure() and dwmac5_fpe_send_mpacket(), add fpe_csr to stmmac_fpe_cfg structure to cache the control bits of MAC_FPE_CTRL_STS and to avoid reading MAC_FPE_CTRL_STS in those methods. Fixes: 5a5586112b92 ("net: stmmac: support FPE link partner hand-shaking procedure") Reviewed-by: Serge Semin Signed-off-by: Jianheng Zhang Link: https://lore.kernel.org/r/CY5PR12MB637225A7CF529D5BE0FBE59CBF81A@CY5PR12MB6372.namprd12.prod.outlook.com Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/stmicro/stmmac/dwmac5.c | 45 +++++++++------------- drivers/net/ethernet/stmicro/stmmac/dwmac5.h | 4 +- .../net/ethernet/stmicro/stmmac/dwxgmac2_core.c | 3 +- drivers/net/ethernet/stmicro/stmmac/hwif.h | 4 +- drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 8 +++- drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c | 1 + include/linux/stmmac.h | 1 + 7 files changed, 36 insertions(+), 30 deletions(-) diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac5.c b/drivers/net/ethernet/stmicro/stmmac/dwmac5.c index e95d35f1e5a0..8fd167501fa0 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac5.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac5.c @@ -710,28 +710,22 @@ void dwmac5_est_irq_status(void __iomem *ioaddr, struct net_device *dev, } } -void dwmac5_fpe_configure(void __iomem *ioaddr, u32 num_txq, u32 num_rxq, +void dwmac5_fpe_configure(void __iomem *ioaddr, struct stmmac_fpe_cfg *cfg, + u32 num_txq, u32 num_rxq, bool enable) { u32 value; - if (!enable) { - value = readl(ioaddr + MAC_FPE_CTRL_STS); - - value &= ~EFPE; - - writel(value, ioaddr + MAC_FPE_CTRL_STS); - return; + if (enable) { + cfg->fpe_csr = EFPE; + value = readl(ioaddr + GMAC_RXQ_CTRL1); + value &= ~GMAC_RXQCTRL_FPRQ; + value |= (num_rxq - 1) << GMAC_RXQCTRL_FPRQ_SHIFT; + writel(value, ioaddr + GMAC_RXQ_CTRL1); + } else { + cfg->fpe_csr = 0; } - - value = readl(ioaddr + GMAC_RXQ_CTRL1); - value &= ~GMAC_RXQCTRL_FPRQ; - value |= (num_rxq - 1) << GMAC_RXQCTRL_FPRQ_SHIFT; - writel(value, ioaddr + GMAC_RXQ_CTRL1); - - value = readl(ioaddr + MAC_FPE_CTRL_STS); - value |= EFPE; - writel(value, ioaddr + MAC_FPE_CTRL_STS); + writel(cfg->fpe_csr, ioaddr + MAC_FPE_CTRL_STS); } int dwmac5_fpe_irq_status(void __iomem *ioaddr, struct net_device *dev) @@ -741,6 +735,9 @@ int dwmac5_fpe_irq_status(void __iomem *ioaddr, struct net_device *dev) status = FPE_EVENT_UNKNOWN; + /* Reads from the MAC_FPE_CTRL_STS register should only be performed + * here, since the status flags of MAC_FPE_CTRL_STS are "clear on read" + */ value = readl(ioaddr + MAC_FPE_CTRL_STS); if (value & TRSP) { @@ -766,19 +763,15 @@ int dwmac5_fpe_irq_status(void __iomem *ioaddr, struct net_device *dev) return status; } -void dwmac5_fpe_send_mpacket(void __iomem *ioaddr, enum stmmac_mpacket_type type) +void dwmac5_fpe_send_mpacket(void __iomem *ioaddr, struct stmmac_fpe_cfg *cfg, + enum stmmac_mpacket_type type) { - u32 value; + u32 value = cfg->fpe_csr; - value = readl(ioaddr + MAC_FPE_CTRL_STS); - - if (type == MPACKET_VERIFY) { - value &= ~SRSP; + if (type == MPACKET_VERIFY) value |= SVER; - } else { - value &= ~SVER; + else if (type == MPACKET_RESPONSE) value |= SRSP; - } writel(value, ioaddr + MAC_FPE_CTRL_STS); } diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac5.h b/drivers/net/ethernet/stmicro/stmmac/dwmac5.h index 53c138d0ff48..34e620790eb3 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac5.h +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac5.h @@ -153,9 +153,11 @@ int dwmac5_est_configure(void __iomem *ioaddr, struct stmmac_est *cfg, unsigned int ptp_rate); void dwmac5_est_irq_status(void __iomem *ioaddr, struct net_device *dev, struct stmmac_extra_stats *x, u32 txqcnt); -void dwmac5_fpe_configure(void __iomem *ioaddr, u32 num_txq, u32 num_rxq, +void dwmac5_fpe_configure(void __iomem *ioaddr, struct stmmac_fpe_cfg *cfg, + u32 num_txq, u32 num_rxq, bool enable); void dwmac5_fpe_send_mpacket(void __iomem *ioaddr, + struct stmmac_fpe_cfg *cfg, enum stmmac_mpacket_type type); int dwmac5_fpe_irq_status(void __iomem *ioaddr, struct net_device *dev); diff --git a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c index 453e88b75be0..a74e71db79f9 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c @@ -1484,7 +1484,8 @@ static int dwxgmac3_est_configure(void __iomem *ioaddr, struct stmmac_est *cfg, return 0; } -static void dwxgmac3_fpe_configure(void __iomem *ioaddr, u32 num_txq, +static void dwxgmac3_fpe_configure(void __iomem *ioaddr, struct stmmac_fpe_cfg *cfg, + u32 num_txq, u32 num_rxq, bool enable) { u32 value; diff --git a/drivers/net/ethernet/stmicro/stmmac/hwif.h b/drivers/net/ethernet/stmicro/stmmac/hwif.h index b95d3e137813..68aa2d5ca6e5 100644 --- a/drivers/net/ethernet/stmicro/stmmac/hwif.h +++ b/drivers/net/ethernet/stmicro/stmmac/hwif.h @@ -412,9 +412,11 @@ struct stmmac_ops { unsigned int ptp_rate); void (*est_irq_status)(void __iomem *ioaddr, struct net_device *dev, struct stmmac_extra_stats *x, u32 txqcnt); - void (*fpe_configure)(void __iomem *ioaddr, u32 num_txq, u32 num_rxq, + void (*fpe_configure)(void __iomem *ioaddr, struct stmmac_fpe_cfg *cfg, + u32 num_txq, u32 num_rxq, bool enable); void (*fpe_send_mpacket)(void __iomem *ioaddr, + struct stmmac_fpe_cfg *cfg, enum stmmac_mpacket_type type); int (*fpe_irq_status)(void __iomem *ioaddr, struct net_device *dev); }; diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index 2afb2bd25977..37e64283f910 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -964,7 +964,8 @@ static void stmmac_fpe_link_state_handle(struct stmmac_priv *priv, bool is_up) bool *hs_enable = &fpe_cfg->hs_enable; if (is_up && *hs_enable) { - stmmac_fpe_send_mpacket(priv, priv->ioaddr, MPACKET_VERIFY); + stmmac_fpe_send_mpacket(priv, priv->ioaddr, fpe_cfg, + MPACKET_VERIFY); } else { *lo_state = FPE_STATE_OFF; *lp_state = FPE_STATE_OFF; @@ -5839,6 +5840,7 @@ static void stmmac_fpe_event_status(struct stmmac_priv *priv, int status) /* If user has requested FPE enable, quickly response */ if (*hs_enable) stmmac_fpe_send_mpacket(priv, priv->ioaddr, + fpe_cfg, MPACKET_RESPONSE); } @@ -7263,6 +7265,7 @@ static void stmmac_fpe_lp_task(struct work_struct *work) if (*lo_state == FPE_STATE_ENTERING_ON && *lp_state == FPE_STATE_ENTERING_ON) { stmmac_fpe_configure(priv, priv->ioaddr, + fpe_cfg, priv->plat->tx_queues_to_use, priv->plat->rx_queues_to_use, *enable); @@ -7281,6 +7284,7 @@ static void stmmac_fpe_lp_task(struct work_struct *work) netdev_info(priv->dev, SEND_VERIFY_MPAKCET_FMT, *lo_state, *lp_state); stmmac_fpe_send_mpacket(priv, priv->ioaddr, + fpe_cfg, MPACKET_VERIFY); } /* Sleep then retry */ @@ -7295,6 +7299,7 @@ void stmmac_fpe_handshake(struct stmmac_priv *priv, bool enable) if (priv->plat->fpe_cfg->hs_enable != enable) { if (enable) { stmmac_fpe_send_mpacket(priv, priv->ioaddr, + priv->plat->fpe_cfg, MPACKET_VERIFY); } else { priv->plat->fpe_cfg->lo_fpe_state = FPE_STATE_OFF; @@ -7755,6 +7760,7 @@ int stmmac_suspend(struct device *dev) if (priv->dma_cap.fpesel) { /* Disable FPE */ stmmac_fpe_configure(priv, priv->ioaddr, + priv->plat->fpe_cfg, priv->plat->tx_queues_to_use, priv->plat->rx_queues_to_use, false); diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c index ac41ef4cbd2f..6ad3e0a11936 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c @@ -1079,6 +1079,7 @@ disable: priv->plat->fpe_cfg->enable = false; stmmac_fpe_configure(priv, priv->ioaddr, + priv->plat->fpe_cfg, priv->plat->tx_queues_to_use, priv->plat->rx_queues_to_use, false); diff --git a/include/linux/stmmac.h b/include/linux/stmmac.h index 0b4658a7eceb..dee5ad6e48c5 100644 --- a/include/linux/stmmac.h +++ b/include/linux/stmmac.h @@ -175,6 +175,7 @@ struct stmmac_fpe_cfg { bool hs_enable; /* FPE handshake enable */ enum stmmac_fpe_state lp_fpe_state; /* Link Partner FPE state */ enum stmmac_fpe_state lo_fpe_state; /* Local station FPE state */ + u32 fpe_csr; /* MAC_FPE_CTRL_STS reg cache */ }; struct stmmac_safety_feature_cfg { -- cgit v1.2.3 From 4b3338aaa74d7d4ec5b6734dc298f0db94ec83d2 Mon Sep 17 00:00:00 2001 From: Naveen N Rao Date: Thu, 30 Nov 2023 12:29:47 +0530 Subject: powerpc/ftrace: Fix stack teardown in ftrace_no_trace Commit 41a506ef71eb ("powerpc/ftrace: Create a dummy stackframe to fix stack unwind") added use of a new stack frame on ftrace entry to fix stack unwind. However, the commit missed updating the offset used while tearing down the ftrace stack when ftrace is disabled. Fix the same. In addition, the commit missed saving the correct stack pointer in pt_regs. Update the same. Fixes: 41a506ef71eb ("powerpc/ftrace: Create a dummy stackframe to fix stack unwind") Cc: stable@vger.kernel.org # v6.5+ Signed-off-by: Naveen N Rao Signed-off-by: Michael Ellerman Link: https://msgid.link/20231130065947.2188860-1-naveen@kernel.org --- arch/powerpc/kernel/trace/ftrace_entry.S | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/powerpc/kernel/trace/ftrace_entry.S b/arch/powerpc/kernel/trace/ftrace_entry.S index 90701885762c..40677416d7b2 100644 --- a/arch/powerpc/kernel/trace/ftrace_entry.S +++ b/arch/powerpc/kernel/trace/ftrace_entry.S @@ -62,7 +62,7 @@ .endif /* Save previous stack pointer (r1) */ - addi r8, r1, SWITCH_FRAME_SIZE + addi r8, r1, SWITCH_FRAME_SIZE+STACK_FRAME_MIN_SIZE PPC_STL r8, GPR1(r1) .if \allregs == 1 @@ -182,7 +182,7 @@ ftrace_no_trace: mflr r3 mtctr r3 REST_GPR(3, r1) - addi r1, r1, SWITCH_FRAME_SIZE + addi r1, r1, SWITCH_FRAME_SIZE+STACK_FRAME_MIN_SIZE mtlr r0 bctr #endif -- cgit v1.2.3 From a5e400a985df8041ed4659ed1462aa9134318130 Mon Sep 17 00:00:00 2001 From: Leon Romanovsky Date: Sun, 20 Aug 2023 20:58:56 +0300 Subject: net/mlx5e: Honor user choice of IPsec replay window size Users can configure IPsec replay window size, but mlx5 driver didn't honor their choice and set always 32bits. Fix assignment logic to configure right size from the beginning. Fixes: 7db21ef4566e ("net/mlx5e: Set IPsec replay sequence numbers") Reviewed-by: Patrisious Haddad Signed-off-by: Leon Romanovsky --- .../ethernet/mellanox/mlx5/core/en_accel/ipsec.c | 21 +++++++++++++++++++++ .../mellanox/mlx5/core/en_accel/ipsec_offload.c | 2 +- include/linux/mlx5/mlx5_ifc.h | 7 +++++++ 3 files changed, 29 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec.c b/drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec.c index 655496598c68..4028932d93ce 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec.c @@ -335,6 +335,27 @@ void mlx5e_ipsec_build_accel_xfrm_attrs(struct mlx5e_ipsec_sa_entry *sa_entry, attrs->replay_esn.esn = sa_entry->esn_state.esn; attrs->replay_esn.esn_msb = sa_entry->esn_state.esn_msb; attrs->replay_esn.overlap = sa_entry->esn_state.overlap; + switch (x->replay_esn->replay_window) { + case 32: + attrs->replay_esn.replay_window = + MLX5_IPSEC_ASO_REPLAY_WIN_32BIT; + break; + case 64: + attrs->replay_esn.replay_window = + MLX5_IPSEC_ASO_REPLAY_WIN_64BIT; + break; + case 128: + attrs->replay_esn.replay_window = + MLX5_IPSEC_ASO_REPLAY_WIN_128BIT; + break; + case 256: + attrs->replay_esn.replay_window = + MLX5_IPSEC_ASO_REPLAY_WIN_256BIT; + break; + default: + WARN_ON(true); + return; + } } attrs->dir = x->xso.dir; diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec_offload.c b/drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec_offload.c index a91f772dc981..4e018fba2d5f 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec_offload.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec_offload.c @@ -95,7 +95,7 @@ static void mlx5e_ipsec_packet_setup(void *obj, u32 pdn, if (attrs->dir == XFRM_DEV_OFFLOAD_IN) { MLX5_SET(ipsec_aso, aso_ctx, window_sz, - attrs->replay_esn.replay_window / 64); + attrs->replay_esn.replay_window); MLX5_SET(ipsec_aso, aso_ctx, mode, MLX5_IPSEC_ASO_REPLAY_PROTECTION); } diff --git a/include/linux/mlx5/mlx5_ifc.h b/include/linux/mlx5/mlx5_ifc.h index 6f3631425f38..90ca63f4bf63 100644 --- a/include/linux/mlx5/mlx5_ifc.h +++ b/include/linux/mlx5/mlx5_ifc.h @@ -12001,6 +12001,13 @@ enum { MLX5_IPSEC_ASO_INC_SN = 0x2, }; +enum { + MLX5_IPSEC_ASO_REPLAY_WIN_32BIT = 0x0, + MLX5_IPSEC_ASO_REPLAY_WIN_64BIT = 0x1, + MLX5_IPSEC_ASO_REPLAY_WIN_128BIT = 0x2, + MLX5_IPSEC_ASO_REPLAY_WIN_256BIT = 0x3, +}; + struct mlx5_ifc_ipsec_aso_bits { u8 valid[0x1]; u8 reserved_at_201[0x1]; -- cgit v1.2.3 From 3d42c8cc67a8fcbff0181f9ed6d03d353edcee07 Mon Sep 17 00:00:00 2001 From: Leon Romanovsky Date: Wed, 20 Sep 2023 10:07:13 +0300 Subject: net/mlx5e: Ensure that IPsec sequence packet number starts from 1 According to RFC4303, section "3.3.3. Sequence Number Generation", the first packet sent using a given SA will contain a sequence number of 1. However if user didn't set seq/oseq, the HW used zero as first sequence packet number. Such misconfiguration causes to drop of first packet if replay window protection was enabled in SA. To fix it, set sequence number to be at least 1. Fixes: 7db21ef4566e ("net/mlx5e: Set IPsec replay sequence numbers") Signed-off-by: Leon Romanovsky --- drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec.c b/drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec.c index 4028932d93ce..914b9e6eb7db 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec.c @@ -121,7 +121,14 @@ static bool mlx5e_ipsec_update_esn_state(struct mlx5e_ipsec_sa_entry *sa_entry) if (x->xso.type == XFRM_DEV_OFFLOAD_CRYPTO) esn_msb = xfrm_replay_seqhi(x, htonl(seq_bottom)); - sa_entry->esn_state.esn = esn; + if (sa_entry->esn_state.esn_msb) + sa_entry->esn_state.esn = esn; + else + /* According to RFC4303, section "3.3.3. Sequence Number Generation", + * the first packet sent using a given SA will contain a sequence + * number of 1. + */ + sa_entry->esn_state.esn = max_t(u32, esn, 1); sa_entry->esn_state.esn_msb = esn_msb; if (unlikely(overlap && seq_bottom < MLX5E_IPSEC_ESN_SCOPE_MID)) { -- cgit v1.2.3 From 94af50c0a9bb961fe93cf0fdd14eb0883da86721 Mon Sep 17 00:00:00 2001 From: Patrisious Haddad Date: Thu, 21 Sep 2023 14:06:18 +0300 Subject: net/mlx5e: Unify esw and normal IPsec status table creation/destruction Change normal IPsec flow to use the same creation/destruction functions for status flow table as that of ESW, which first of all refines the code to have less code duplication. And more importantly, the ESW status table handles IPsec syndrome checks at steering by HW, which is more efficient than the previous behaviour we had where it was copied to WQE meta data and checked by the driver. Fixes: 1762f132d542 ("net/mlx5e: Support IPsec packet offload for RX in switchdev mode") Signed-off-by: Patrisious Haddad Signed-off-by: Leon Romanovsky --- .../mellanox/mlx5/core/en_accel/ipsec_fs.c | 187 ++++++++++++++++----- .../net/ethernet/mellanox/mlx5/core/esw/ipsec_fs.c | 152 ----------------- .../net/ethernet/mellanox/mlx5/core/esw/ipsec_fs.h | 15 -- 3 files changed, 141 insertions(+), 213 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec_fs.c b/drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec_fs.c index f41c976dc33f..85ed5171e835 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec_fs.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec_fs.c @@ -128,63 +128,166 @@ static struct mlx5_flow_table *ipsec_ft_create(struct mlx5_flow_namespace *ns, return mlx5_create_auto_grouped_flow_table(ns, &ft_attr); } -static int ipsec_status_rule(struct mlx5_core_dev *mdev, - struct mlx5e_ipsec_rx *rx, - struct mlx5_flow_destination *dest) +static void ipsec_rx_status_drop_destroy(struct mlx5e_ipsec *ipsec, + struct mlx5e_ipsec_rx *rx) { - u8 action[MLX5_UN_SZ_BYTES(set_add_copy_action_in_auto)] = {}; + mlx5_del_flow_rules(rx->status_drop.rule); + mlx5_destroy_flow_group(rx->status_drop.group); + mlx5_fc_destroy(ipsec->mdev, rx->status_drop_cnt); +} + +static void ipsec_rx_status_pass_destroy(struct mlx5e_ipsec *ipsec, + struct mlx5e_ipsec_rx *rx) +{ + mlx5_del_flow_rules(rx->status.rule); + + if (rx != ipsec->rx_esw) + return; + +#ifdef CONFIG_MLX5_ESWITCH + mlx5_chains_put_table(esw_chains(ipsec->mdev->priv.eswitch), 0, 1, 0); +#endif +} + +static int ipsec_rx_status_drop_create(struct mlx5e_ipsec *ipsec, + struct mlx5e_ipsec_rx *rx) +{ + int inlen = MLX5_ST_SZ_BYTES(create_flow_group_in); + struct mlx5_flow_table *ft = rx->ft.status; + struct mlx5_core_dev *mdev = ipsec->mdev; + struct mlx5_flow_destination dest = {}; struct mlx5_flow_act flow_act = {}; - struct mlx5_modify_hdr *modify_hdr; - struct mlx5_flow_handle *fte; + struct mlx5_flow_handle *rule; + struct mlx5_fc *flow_counter; struct mlx5_flow_spec *spec; - int err; + struct mlx5_flow_group *g; + u32 *flow_group_in; + int err = 0; + flow_group_in = kvzalloc(inlen, GFP_KERNEL); spec = kvzalloc(sizeof(*spec), GFP_KERNEL); - if (!spec) - return -ENOMEM; + if (!flow_group_in || !spec) { + err = -ENOMEM; + goto err_out; + } - /* Action to copy 7 bit ipsec_syndrome to regB[24:30] */ - MLX5_SET(copy_action_in, action, action_type, MLX5_ACTION_TYPE_COPY); - MLX5_SET(copy_action_in, action, src_field, MLX5_ACTION_IN_FIELD_IPSEC_SYNDROME); - MLX5_SET(copy_action_in, action, src_offset, 0); - MLX5_SET(copy_action_in, action, length, 7); - MLX5_SET(copy_action_in, action, dst_field, MLX5_ACTION_IN_FIELD_METADATA_REG_B); - MLX5_SET(copy_action_in, action, dst_offset, 24); + MLX5_SET(create_flow_group_in, flow_group_in, start_flow_index, ft->max_fte - 1); + MLX5_SET(create_flow_group_in, flow_group_in, end_flow_index, ft->max_fte - 1); + g = mlx5_create_flow_group(ft, flow_group_in); + if (IS_ERR(g)) { + err = PTR_ERR(g); + mlx5_core_err(mdev, + "Failed to add ipsec rx status drop flow group, err=%d\n", err); + goto err_out; + } - modify_hdr = mlx5_modify_header_alloc(mdev, MLX5_FLOW_NAMESPACE_KERNEL, - 1, action); + flow_counter = mlx5_fc_create(mdev, false); + if (IS_ERR(flow_counter)) { + err = PTR_ERR(flow_counter); + mlx5_core_err(mdev, + "Failed to add ipsec rx status drop rule counter, err=%d\n", err); + goto err_cnt; + } - if (IS_ERR(modify_hdr)) { - err = PTR_ERR(modify_hdr); + flow_act.action = MLX5_FLOW_CONTEXT_ACTION_DROP | MLX5_FLOW_CONTEXT_ACTION_COUNT; + dest.type = MLX5_FLOW_DESTINATION_TYPE_COUNTER; + dest.counter_id = mlx5_fc_id(flow_counter); + if (rx == ipsec->rx_esw) + spec->flow_context.flow_source = MLX5_FLOW_CONTEXT_FLOW_SOURCE_UPLINK; + rule = mlx5_add_flow_rules(ft, spec, &flow_act, &dest, 1); + if (IS_ERR(rule)) { + err = PTR_ERR(rule); mlx5_core_err(mdev, - "fail to alloc ipsec copy modify_header_id err=%d\n", err); - goto out_spec; + "Failed to add ipsec rx status drop rule, err=%d\n", err); + goto err_rule; } - /* create fte */ - flow_act.action = MLX5_FLOW_CONTEXT_ACTION_MOD_HDR | - MLX5_FLOW_CONTEXT_ACTION_FWD_DEST | + rx->status_drop.group = g; + rx->status_drop.rule = rule; + rx->status_drop_cnt = flow_counter; + + kvfree(flow_group_in); + kvfree(spec); + return 0; + +err_rule: + mlx5_fc_destroy(mdev, flow_counter); +err_cnt: + mlx5_destroy_flow_group(g); +err_out: + kvfree(flow_group_in); + kvfree(spec); + return err; +} + +static int ipsec_rx_status_pass_create(struct mlx5e_ipsec *ipsec, + struct mlx5e_ipsec_rx *rx, + struct mlx5_flow_destination *dest) +{ + struct mlx5_flow_act flow_act = {}; + struct mlx5_flow_handle *rule; + struct mlx5_flow_spec *spec; + int err; + + spec = kvzalloc(sizeof(*spec), GFP_KERNEL); + if (!spec) + return -ENOMEM; + + MLX5_SET_TO_ONES(fte_match_param, spec->match_criteria, + misc_parameters_2.ipsec_syndrome); + MLX5_SET(fte_match_param, spec->match_value, + misc_parameters_2.ipsec_syndrome, 0); + if (rx == ipsec->rx_esw) + spec->flow_context.flow_source = MLX5_FLOW_CONTEXT_FLOW_SOURCE_UPLINK; + spec->match_criteria_enable = MLX5_MATCH_MISC_PARAMETERS_2; + flow_act.flags = FLOW_ACT_NO_APPEND; + flow_act.action = MLX5_FLOW_CONTEXT_ACTION_FWD_DEST | MLX5_FLOW_CONTEXT_ACTION_COUNT; - flow_act.modify_hdr = modify_hdr; - fte = mlx5_add_flow_rules(rx->ft.status, spec, &flow_act, dest, 2); - if (IS_ERR(fte)) { - err = PTR_ERR(fte); - mlx5_core_err(mdev, "fail to add ipsec rx err copy rule err=%d\n", err); - goto out; + rule = mlx5_add_flow_rules(rx->ft.status, spec, &flow_act, dest, 2); + if (IS_ERR(rule)) { + err = PTR_ERR(rule); + mlx5_core_warn(ipsec->mdev, + "Failed to add ipsec rx status pass rule, err=%d\n", err); + goto err_rule; } + rx->status.rule = rule; kvfree(spec); - rx->status.rule = fte; - rx->status.modify_hdr = modify_hdr; return 0; -out: - mlx5_modify_header_dealloc(mdev, modify_hdr); -out_spec: +err_rule: kvfree(spec); return err; } +static void mlx5_ipsec_rx_status_destroy(struct mlx5e_ipsec *ipsec, + struct mlx5e_ipsec_rx *rx) +{ + ipsec_rx_status_pass_destroy(ipsec, rx); + ipsec_rx_status_drop_destroy(ipsec, rx); +} + +static int mlx5_ipsec_rx_status_create(struct mlx5e_ipsec *ipsec, + struct mlx5e_ipsec_rx *rx, + struct mlx5_flow_destination *dest) +{ + int err; + + err = ipsec_rx_status_drop_create(ipsec, rx); + if (err) + return err; + + err = ipsec_rx_status_pass_create(ipsec, rx, dest); + if (err) + goto err_pass_create; + + return 0; + +err_pass_create: + ipsec_rx_status_drop_destroy(ipsec, rx); + return err; +} + static int ipsec_miss_create(struct mlx5_core_dev *mdev, struct mlx5_flow_table *ft, struct mlx5e_ipsec_miss *miss, @@ -333,12 +436,7 @@ static void rx_destroy(struct mlx5_core_dev *mdev, struct mlx5e_ipsec *ipsec, mlx5_destroy_flow_table(rx->ft.sa); if (rx->allow_tunnel_mode) mlx5_eswitch_unblock_encap(mdev); - if (rx == ipsec->rx_esw) { - mlx5_esw_ipsec_rx_status_destroy(ipsec, rx); - } else { - mlx5_del_flow_rules(rx->status.rule); - mlx5_modify_header_dealloc(mdev, rx->status.modify_hdr); - } + mlx5_ipsec_rx_status_destroy(ipsec, rx); mlx5_destroy_flow_table(rx->ft.status); mlx5_ipsec_fs_roce_rx_destroy(ipsec->roce, family, mdev); @@ -428,10 +526,7 @@ static int rx_create(struct mlx5_core_dev *mdev, struct mlx5e_ipsec *ipsec, dest[1].type = MLX5_FLOW_DESTINATION_TYPE_COUNTER; dest[1].counter_id = mlx5_fc_id(rx->fc->cnt); - if (rx == ipsec->rx_esw) - err = mlx5_esw_ipsec_rx_status_create(ipsec, rx, dest); - else - err = ipsec_status_rule(mdev, rx, dest); + err = mlx5_ipsec_rx_status_create(ipsec, rx, dest); if (err) goto err_add; diff --git a/drivers/net/ethernet/mellanox/mlx5/core/esw/ipsec_fs.c b/drivers/net/ethernet/mellanox/mlx5/core/esw/ipsec_fs.c index 095f31f380fa..13b5916b64e2 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/esw/ipsec_fs.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/esw/ipsec_fs.c @@ -21,158 +21,6 @@ enum { MLX5_ESW_IPSEC_TX_ESP_FT_CNT_LEVEL, }; -static void esw_ipsec_rx_status_drop_destroy(struct mlx5e_ipsec *ipsec, - struct mlx5e_ipsec_rx *rx) -{ - mlx5_del_flow_rules(rx->status_drop.rule); - mlx5_destroy_flow_group(rx->status_drop.group); - mlx5_fc_destroy(ipsec->mdev, rx->status_drop_cnt); -} - -static void esw_ipsec_rx_status_pass_destroy(struct mlx5e_ipsec *ipsec, - struct mlx5e_ipsec_rx *rx) -{ - mlx5_del_flow_rules(rx->status.rule); - mlx5_chains_put_table(esw_chains(ipsec->mdev->priv.eswitch), 0, 1, 0); -} - -static int esw_ipsec_rx_status_drop_create(struct mlx5e_ipsec *ipsec, - struct mlx5e_ipsec_rx *rx) -{ - int inlen = MLX5_ST_SZ_BYTES(create_flow_group_in); - struct mlx5_flow_table *ft = rx->ft.status; - struct mlx5_core_dev *mdev = ipsec->mdev; - struct mlx5_flow_destination dest = {}; - struct mlx5_flow_act flow_act = {}; - struct mlx5_flow_handle *rule; - struct mlx5_fc *flow_counter; - struct mlx5_flow_spec *spec; - struct mlx5_flow_group *g; - u32 *flow_group_in; - int err = 0; - - flow_group_in = kvzalloc(inlen, GFP_KERNEL); - spec = kvzalloc(sizeof(*spec), GFP_KERNEL); - if (!flow_group_in || !spec) { - err = -ENOMEM; - goto err_out; - } - - MLX5_SET(create_flow_group_in, flow_group_in, start_flow_index, ft->max_fte - 1); - MLX5_SET(create_flow_group_in, flow_group_in, end_flow_index, ft->max_fte - 1); - g = mlx5_create_flow_group(ft, flow_group_in); - if (IS_ERR(g)) { - err = PTR_ERR(g); - mlx5_core_err(mdev, - "Failed to add ipsec rx status drop flow group, err=%d\n", err); - goto err_out; - } - - flow_counter = mlx5_fc_create(mdev, false); - if (IS_ERR(flow_counter)) { - err = PTR_ERR(flow_counter); - mlx5_core_err(mdev, - "Failed to add ipsec rx status drop rule counter, err=%d\n", err); - goto err_cnt; - } - - flow_act.action = MLX5_FLOW_CONTEXT_ACTION_DROP | MLX5_FLOW_CONTEXT_ACTION_COUNT; - dest.type = MLX5_FLOW_DESTINATION_TYPE_COUNTER; - dest.counter_id = mlx5_fc_id(flow_counter); - spec->flow_context.flow_source = MLX5_FLOW_CONTEXT_FLOW_SOURCE_UPLINK; - rule = mlx5_add_flow_rules(ft, spec, &flow_act, &dest, 1); - if (IS_ERR(rule)) { - err = PTR_ERR(rule); - mlx5_core_err(mdev, - "Failed to add ipsec rx status drop rule, err=%d\n", err); - goto err_rule; - } - - rx->status_drop.group = g; - rx->status_drop.rule = rule; - rx->status_drop_cnt = flow_counter; - - kvfree(flow_group_in); - kvfree(spec); - return 0; - -err_rule: - mlx5_fc_destroy(mdev, flow_counter); -err_cnt: - mlx5_destroy_flow_group(g); -err_out: - kvfree(flow_group_in); - kvfree(spec); - return err; -} - -static int esw_ipsec_rx_status_pass_create(struct mlx5e_ipsec *ipsec, - struct mlx5e_ipsec_rx *rx, - struct mlx5_flow_destination *dest) -{ - struct mlx5_flow_act flow_act = {}; - struct mlx5_flow_handle *rule; - struct mlx5_flow_spec *spec; - int err; - - spec = kvzalloc(sizeof(*spec), GFP_KERNEL); - if (!spec) - return -ENOMEM; - - MLX5_SET_TO_ONES(fte_match_param, spec->match_criteria, - misc_parameters_2.ipsec_syndrome); - MLX5_SET(fte_match_param, spec->match_value, - misc_parameters_2.ipsec_syndrome, 0); - spec->flow_context.flow_source = MLX5_FLOW_CONTEXT_FLOW_SOURCE_UPLINK; - spec->match_criteria_enable = MLX5_MATCH_MISC_PARAMETERS_2; - flow_act.flags = FLOW_ACT_NO_APPEND; - flow_act.action = MLX5_FLOW_CONTEXT_ACTION_FWD_DEST | - MLX5_FLOW_CONTEXT_ACTION_COUNT; - rule = mlx5_add_flow_rules(rx->ft.status, spec, &flow_act, dest, 2); - if (IS_ERR(rule)) { - err = PTR_ERR(rule); - mlx5_core_warn(ipsec->mdev, - "Failed to add ipsec rx status pass rule, err=%d\n", err); - goto err_rule; - } - - rx->status.rule = rule; - kvfree(spec); - return 0; - -err_rule: - kvfree(spec); - return err; -} - -void mlx5_esw_ipsec_rx_status_destroy(struct mlx5e_ipsec *ipsec, - struct mlx5e_ipsec_rx *rx) -{ - esw_ipsec_rx_status_pass_destroy(ipsec, rx); - esw_ipsec_rx_status_drop_destroy(ipsec, rx); -} - -int mlx5_esw_ipsec_rx_status_create(struct mlx5e_ipsec *ipsec, - struct mlx5e_ipsec_rx *rx, - struct mlx5_flow_destination *dest) -{ - int err; - - err = esw_ipsec_rx_status_drop_create(ipsec, rx); - if (err) - return err; - - err = esw_ipsec_rx_status_pass_create(ipsec, rx, dest); - if (err) - goto err_pass_create; - - return 0; - -err_pass_create: - esw_ipsec_rx_status_drop_destroy(ipsec, rx); - return err; -} - void mlx5_esw_ipsec_rx_create_attr_set(struct mlx5e_ipsec *ipsec, struct mlx5e_ipsec_rx_create_attr *attr) { diff --git a/drivers/net/ethernet/mellanox/mlx5/core/esw/ipsec_fs.h b/drivers/net/ethernet/mellanox/mlx5/core/esw/ipsec_fs.h index 0c90f7a8b0d3..ac9c65b89166 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/esw/ipsec_fs.h +++ b/drivers/net/ethernet/mellanox/mlx5/core/esw/ipsec_fs.h @@ -8,11 +8,6 @@ struct mlx5e_ipsec; struct mlx5e_ipsec_sa_entry; #ifdef CONFIG_MLX5_ESWITCH -void mlx5_esw_ipsec_rx_status_destroy(struct mlx5e_ipsec *ipsec, - struct mlx5e_ipsec_rx *rx); -int mlx5_esw_ipsec_rx_status_create(struct mlx5e_ipsec *ipsec, - struct mlx5e_ipsec_rx *rx, - struct mlx5_flow_destination *dest); void mlx5_esw_ipsec_rx_create_attr_set(struct mlx5e_ipsec *ipsec, struct mlx5e_ipsec_rx_create_attr *attr); int mlx5_esw_ipsec_rx_status_pass_dest_get(struct mlx5e_ipsec *ipsec, @@ -26,16 +21,6 @@ void mlx5_esw_ipsec_tx_create_attr_set(struct mlx5e_ipsec *ipsec, struct mlx5e_ipsec_tx_create_attr *attr); void mlx5_esw_ipsec_restore_dest_uplink(struct mlx5_core_dev *mdev); #else -static inline void mlx5_esw_ipsec_rx_status_destroy(struct mlx5e_ipsec *ipsec, - struct mlx5e_ipsec_rx *rx) {} - -static inline int mlx5_esw_ipsec_rx_status_create(struct mlx5e_ipsec *ipsec, - struct mlx5e_ipsec_rx *rx, - struct mlx5_flow_destination *dest) -{ - return -EINVAL; -} - static inline void mlx5_esw_ipsec_rx_create_attr_set(struct mlx5e_ipsec *ipsec, struct mlx5e_ipsec_rx_create_attr *attr) {} -- cgit v1.2.3 From 5ad00dee43b98129b86930d457b983d4d04dc553 Mon Sep 17 00:00:00 2001 From: Leon Romanovsky Date: Tue, 3 Oct 2023 16:44:19 +0300 Subject: net/mlx5e: Remove exposure of IPsec RX flow steering struct After previous commit, which unified various IPsec creation modes, there is no need to have struct mlx5e_ipsec_rx exposed in global IPsec header. Move it to ipsec_fs.c to be placed together with already existing struct mlx5e_ipsec_tx. Fixes: 1762f132d542 ("net/mlx5e: Support IPsec packet offload for RX in switchdev mode") Signed-off-by: Leon Romanovsky --- drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec.h | 14 +------------- .../net/ethernet/mellanox/mlx5/core/en_accel/ipsec_fs.c | 16 ++++++++++++++-- drivers/net/ethernet/mellanox/mlx5/core/esw/ipsec_fs.c | 8 ++++---- 3 files changed, 19 insertions(+), 19 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec.h b/drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec.h index 8f4a37bceaf4..c3a40bf11952 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec.h +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec.h @@ -201,19 +201,6 @@ struct mlx5e_ipsec_miss { struct mlx5_flow_handle *rule; }; -struct mlx5e_ipsec_rx { - struct mlx5e_ipsec_ft ft; - struct mlx5e_ipsec_miss pol; - struct mlx5e_ipsec_miss sa; - struct mlx5e_ipsec_rule status; - struct mlx5e_ipsec_miss status_drop; - struct mlx5_fc *status_drop_cnt; - struct mlx5e_ipsec_fc *fc; - struct mlx5_fs_chains *chains; - u8 allow_tunnel_mode : 1; - struct xarray ipsec_obj_id_map; -}; - struct mlx5e_ipsec_tx_create_attr { int prio; int pol_level; @@ -248,6 +235,7 @@ struct mlx5e_ipsec { struct mlx5_ipsec_fs *roce; u8 is_uplink_rep: 1; struct mlx5e_ipsec_mpv_work mpv_work; + struct xarray ipsec_obj_id_map; }; struct mlx5e_ipsec_esn_state { diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec_fs.c b/drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec_fs.c index 85ed5171e835..aa74a2422869 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec_fs.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec_fs.c @@ -32,6 +32,18 @@ struct mlx5e_ipsec_tx { u8 allow_tunnel_mode : 1; }; +struct mlx5e_ipsec_rx { + struct mlx5e_ipsec_ft ft; + struct mlx5e_ipsec_miss pol; + struct mlx5e_ipsec_miss sa; + struct mlx5e_ipsec_rule status; + struct mlx5e_ipsec_miss status_drop; + struct mlx5_fc *status_drop_cnt; + struct mlx5e_ipsec_fc *fc; + struct mlx5_fs_chains *chains; + u8 allow_tunnel_mode : 1; +}; + /* IPsec RX flow steering */ static enum mlx5_traffic_types family2tt(u32 family) { @@ -2052,7 +2064,7 @@ void mlx5e_accel_ipsec_fs_cleanup(struct mlx5e_ipsec *ipsec) kfree(ipsec->rx_ipv6); if (ipsec->is_uplink_rep) { - xa_destroy(&ipsec->rx_esw->ipsec_obj_id_map); + xa_destroy(&ipsec->ipsec_obj_id_map); mutex_destroy(&ipsec->tx_esw->ft.mutex); WARN_ON(ipsec->tx_esw->ft.refcnt); @@ -2115,7 +2127,7 @@ int mlx5e_accel_ipsec_fs_init(struct mlx5e_ipsec *ipsec, mutex_init(&ipsec->tx_esw->ft.mutex); mutex_init(&ipsec->rx_esw->ft.mutex); ipsec->tx_esw->ns = ns_esw; - xa_init_flags(&ipsec->rx_esw->ipsec_obj_id_map, XA_FLAGS_ALLOC1); + xa_init_flags(&ipsec->ipsec_obj_id_map, XA_FLAGS_ALLOC1); } else if (mlx5_ipsec_device_caps(mdev) & MLX5_IPSEC_CAP_ROCE) { ipsec->roce = mlx5_ipsec_fs_roce_init(mdev, devcom); } else { diff --git a/drivers/net/ethernet/mellanox/mlx5/core/esw/ipsec_fs.c b/drivers/net/ethernet/mellanox/mlx5/core/esw/ipsec_fs.c index 13b5916b64e2..5a0047bdcb51 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/esw/ipsec_fs.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/esw/ipsec_fs.c @@ -50,7 +50,7 @@ int mlx5_esw_ipsec_rx_setup_modify_header(struct mlx5e_ipsec_sa_entry *sa_entry, u32 mapped_id; int err; - err = xa_alloc_bh(&ipsec->rx_esw->ipsec_obj_id_map, &mapped_id, + err = xa_alloc_bh(&ipsec->ipsec_obj_id_map, &mapped_id, xa_mk_value(sa_entry->ipsec_obj_id), XA_LIMIT(1, ESW_IPSEC_RX_MAPPED_ID_MASK), 0); if (err) @@ -81,7 +81,7 @@ int mlx5_esw_ipsec_rx_setup_modify_header(struct mlx5e_ipsec_sa_entry *sa_entry, return 0; err_header_alloc: - xa_erase_bh(&ipsec->rx_esw->ipsec_obj_id_map, mapped_id); + xa_erase_bh(&ipsec->ipsec_obj_id_map, mapped_id); return err; } @@ -90,7 +90,7 @@ void mlx5_esw_ipsec_rx_id_mapping_remove(struct mlx5e_ipsec_sa_entry *sa_entry) struct mlx5e_ipsec *ipsec = sa_entry->ipsec; if (sa_entry->rx_mapped_id) - xa_erase_bh(&ipsec->rx_esw->ipsec_obj_id_map, + xa_erase_bh(&ipsec->ipsec_obj_id_map, sa_entry->rx_mapped_id); } @@ -100,7 +100,7 @@ int mlx5_esw_ipsec_rx_ipsec_obj_id_search(struct mlx5e_priv *priv, u32 id, struct mlx5e_ipsec *ipsec = priv->ipsec; void *val; - val = xa_load(&ipsec->rx_esw->ipsec_obj_id_map, id); + val = xa_load(&ipsec->ipsec_obj_id_map, id); if (!val) return -ENOENT; -- cgit v1.2.3 From dddb49b63d8683be81cff220b94a0196c1367b74 Mon Sep 17 00:00:00 2001 From: Patrisious Haddad Date: Sun, 24 Sep 2023 11:50:31 +0300 Subject: net/mlx5e: Add IPsec and ASO syndromes check in HW After IPsec decryption it isn't enough to only check the IPsec syndrome but need to also check the ASO syndrome in order to verify that the operation was actually successful. Verify that both syndromes are actually zero and in case not drop the packet and increment the appropriate flow counter for the drop reason. Fixes: 6b5c45e16e43 ("net/mlx5e: Configure IPsec packet offload flow steering") Signed-off-by: Patrisious Haddad Signed-off-by: Leon Romanovsky --- .../ethernet/mellanox/mlx5/core/en_accel/ipsec.h | 8 + .../mellanox/mlx5/core/en_accel/ipsec_fs.c | 235 +++++++++++++++++++-- 2 files changed, 223 insertions(+), 20 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec.h b/drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec.h index c3a40bf11952..adaea3493193 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec.h +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec.h @@ -189,11 +189,19 @@ struct mlx5e_ipsec_ft { u32 refcnt; }; +struct mlx5e_ipsec_drop { + struct mlx5_flow_handle *rule; + struct mlx5_fc *fc; +}; + struct mlx5e_ipsec_rule { struct mlx5_flow_handle *rule; struct mlx5_modify_hdr *modify_hdr; struct mlx5_pkt_reformat *pkt_reformat; struct mlx5_fc *fc; + struct mlx5e_ipsec_drop replay; + struct mlx5e_ipsec_drop auth; + struct mlx5e_ipsec_drop trailer; }; struct mlx5e_ipsec_miss { diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec_fs.c b/drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec_fs.c index aa74a2422869..aeb399d8dae5 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec_fs.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec_fs.c @@ -32,13 +32,17 @@ struct mlx5e_ipsec_tx { u8 allow_tunnel_mode : 1; }; +struct mlx5e_ipsec_status_checks { + struct mlx5_flow_group *drop_all_group; + struct mlx5e_ipsec_drop all; +}; + struct mlx5e_ipsec_rx { struct mlx5e_ipsec_ft ft; struct mlx5e_ipsec_miss pol; struct mlx5e_ipsec_miss sa; struct mlx5e_ipsec_rule status; - struct mlx5e_ipsec_miss status_drop; - struct mlx5_fc *status_drop_cnt; + struct mlx5e_ipsec_status_checks status_drops; struct mlx5e_ipsec_fc *fc; struct mlx5_fs_chains *chains; u8 allow_tunnel_mode : 1; @@ -143,9 +147,9 @@ static struct mlx5_flow_table *ipsec_ft_create(struct mlx5_flow_namespace *ns, static void ipsec_rx_status_drop_destroy(struct mlx5e_ipsec *ipsec, struct mlx5e_ipsec_rx *rx) { - mlx5_del_flow_rules(rx->status_drop.rule); - mlx5_destroy_flow_group(rx->status_drop.group); - mlx5_fc_destroy(ipsec->mdev, rx->status_drop_cnt); + mlx5_del_flow_rules(rx->status_drops.all.rule); + mlx5_fc_destroy(ipsec->mdev, rx->status_drops.all.fc); + mlx5_destroy_flow_group(rx->status_drops.drop_all_group); } static void ipsec_rx_status_pass_destroy(struct mlx5e_ipsec *ipsec, @@ -161,8 +165,149 @@ static void ipsec_rx_status_pass_destroy(struct mlx5e_ipsec *ipsec, #endif } -static int ipsec_rx_status_drop_create(struct mlx5e_ipsec *ipsec, - struct mlx5e_ipsec_rx *rx) +static int rx_add_rule_drop_auth_trailer(struct mlx5e_ipsec_sa_entry *sa_entry, + struct mlx5e_ipsec_rx *rx) +{ + struct mlx5e_ipsec *ipsec = sa_entry->ipsec; + struct mlx5_flow_table *ft = rx->ft.status; + struct mlx5_core_dev *mdev = ipsec->mdev; + struct mlx5_flow_destination dest = {}; + struct mlx5_flow_act flow_act = {}; + struct mlx5_flow_handle *rule; + struct mlx5_fc *flow_counter; + struct mlx5_flow_spec *spec; + int err; + + spec = kvzalloc(sizeof(*spec), GFP_KERNEL); + if (!spec) + return -ENOMEM; + + flow_counter = mlx5_fc_create(mdev, true); + if (IS_ERR(flow_counter)) { + err = PTR_ERR(flow_counter); + mlx5_core_err(mdev, + "Failed to add ipsec rx status drop rule counter, err=%d\n", err); + goto err_cnt; + } + sa_entry->ipsec_rule.auth.fc = flow_counter; + + flow_act.action = MLX5_FLOW_CONTEXT_ACTION_DROP | MLX5_FLOW_CONTEXT_ACTION_COUNT; + flow_act.flags = FLOW_ACT_NO_APPEND; + dest.type = MLX5_FLOW_DESTINATION_TYPE_COUNTER; + dest.counter_id = mlx5_fc_id(flow_counter); + if (rx == ipsec->rx_esw) + spec->flow_context.flow_source = MLX5_FLOW_CONTEXT_FLOW_SOURCE_UPLINK; + + MLX5_SET_TO_ONES(fte_match_param, spec->match_criteria, misc_parameters_2.ipsec_syndrome); + MLX5_SET(fte_match_param, spec->match_value, misc_parameters_2.ipsec_syndrome, 1); + MLX5_SET_TO_ONES(fte_match_param, spec->match_criteria, misc_parameters_2.metadata_reg_c_2); + MLX5_SET(fte_match_param, spec->match_value, + misc_parameters_2.metadata_reg_c_2, + sa_entry->ipsec_obj_id | BIT(31)); + spec->match_criteria_enable = MLX5_MATCH_MISC_PARAMETERS_2; + rule = mlx5_add_flow_rules(ft, spec, &flow_act, &dest, 1); + if (IS_ERR(rule)) { + err = PTR_ERR(rule); + mlx5_core_err(mdev, + "Failed to add ipsec rx status drop rule, err=%d\n", err); + goto err_rule; + } + sa_entry->ipsec_rule.auth.rule = rule; + + flow_counter = mlx5_fc_create(mdev, true); + if (IS_ERR(flow_counter)) { + err = PTR_ERR(flow_counter); + mlx5_core_err(mdev, + "Failed to add ipsec rx status drop rule counter, err=%d\n", err); + goto err_cnt_2; + } + sa_entry->ipsec_rule.trailer.fc = flow_counter; + + dest.counter_id = mlx5_fc_id(flow_counter); + MLX5_SET(fte_match_param, spec->match_value, misc_parameters_2.ipsec_syndrome, 2); + rule = mlx5_add_flow_rules(ft, spec, &flow_act, &dest, 1); + if (IS_ERR(rule)) { + err = PTR_ERR(rule); + mlx5_core_err(mdev, + "Failed to add ipsec rx status drop rule, err=%d\n", err); + goto err_rule_2; + } + sa_entry->ipsec_rule.trailer.rule = rule; + + kvfree(spec); + return 0; + +err_rule_2: + mlx5_fc_destroy(mdev, sa_entry->ipsec_rule.trailer.fc); +err_cnt_2: + mlx5_del_flow_rules(sa_entry->ipsec_rule.auth.rule); +err_rule: + mlx5_fc_destroy(mdev, sa_entry->ipsec_rule.auth.fc); +err_cnt: + kvfree(spec); + return err; +} + +static int rx_add_rule_drop_replay(struct mlx5e_ipsec_sa_entry *sa_entry, struct mlx5e_ipsec_rx *rx) +{ + struct mlx5e_ipsec *ipsec = sa_entry->ipsec; + struct mlx5_flow_table *ft = rx->ft.status; + struct mlx5_core_dev *mdev = ipsec->mdev; + struct mlx5_flow_destination dest = {}; + struct mlx5_flow_act flow_act = {}; + struct mlx5_flow_handle *rule; + struct mlx5_fc *flow_counter; + struct mlx5_flow_spec *spec; + int err; + + spec = kvzalloc(sizeof(*spec), GFP_KERNEL); + if (!spec) + return -ENOMEM; + + flow_counter = mlx5_fc_create(mdev, true); + if (IS_ERR(flow_counter)) { + err = PTR_ERR(flow_counter); + mlx5_core_err(mdev, + "Failed to add ipsec rx status drop rule counter, err=%d\n", err); + goto err_cnt; + } + + flow_act.action = MLX5_FLOW_CONTEXT_ACTION_DROP | MLX5_FLOW_CONTEXT_ACTION_COUNT; + flow_act.flags = FLOW_ACT_NO_APPEND; + dest.type = MLX5_FLOW_DESTINATION_TYPE_COUNTER; + dest.counter_id = mlx5_fc_id(flow_counter); + if (rx == ipsec->rx_esw) + spec->flow_context.flow_source = MLX5_FLOW_CONTEXT_FLOW_SOURCE_UPLINK; + + MLX5_SET_TO_ONES(fte_match_param, spec->match_criteria, misc_parameters_2.metadata_reg_c_4); + MLX5_SET(fte_match_param, spec->match_value, misc_parameters_2.metadata_reg_c_4, 1); + MLX5_SET_TO_ONES(fte_match_param, spec->match_criteria, misc_parameters_2.metadata_reg_c_2); + MLX5_SET(fte_match_param, spec->match_value, misc_parameters_2.metadata_reg_c_2, + sa_entry->ipsec_obj_id | BIT(31)); + spec->match_criteria_enable = MLX5_MATCH_MISC_PARAMETERS_2; + rule = mlx5_add_flow_rules(ft, spec, &flow_act, &dest, 1); + if (IS_ERR(rule)) { + err = PTR_ERR(rule); + mlx5_core_err(mdev, + "Failed to add ipsec rx status drop rule, err=%d\n", err); + goto err_rule; + } + + sa_entry->ipsec_rule.replay.rule = rule; + sa_entry->ipsec_rule.replay.fc = flow_counter; + + kvfree(spec); + return 0; + +err_rule: + mlx5_fc_destroy(mdev, flow_counter); +err_cnt: + kvfree(spec); + return err; +} + +static int ipsec_rx_status_drop_all_create(struct mlx5e_ipsec *ipsec, + struct mlx5e_ipsec_rx *rx) { int inlen = MLX5_ST_SZ_BYTES(create_flow_group_in); struct mlx5_flow_table *ft = rx->ft.status; @@ -214,9 +359,9 @@ static int ipsec_rx_status_drop_create(struct mlx5e_ipsec *ipsec, goto err_rule; } - rx->status_drop.group = g; - rx->status_drop.rule = rule; - rx->status_drop_cnt = flow_counter; + rx->status_drops.drop_all_group = g; + rx->status_drops.all.rule = rule; + rx->status_drops.all.fc = flow_counter; kvfree(flow_group_in); kvfree(spec); @@ -247,8 +392,12 @@ static int ipsec_rx_status_pass_create(struct mlx5e_ipsec *ipsec, MLX5_SET_TO_ONES(fte_match_param, spec->match_criteria, misc_parameters_2.ipsec_syndrome); + MLX5_SET_TO_ONES(fte_match_param, spec->match_criteria, + misc_parameters_2.metadata_reg_c_4); MLX5_SET(fte_match_param, spec->match_value, misc_parameters_2.ipsec_syndrome, 0); + MLX5_SET(fte_match_param, spec->match_value, + misc_parameters_2.metadata_reg_c_4, 0); if (rx == ipsec->rx_esw) spec->flow_context.flow_source = MLX5_FLOW_CONTEXT_FLOW_SOURCE_UPLINK; spec->match_criteria_enable = MLX5_MATCH_MISC_PARAMETERS_2; @@ -285,7 +434,7 @@ static int mlx5_ipsec_rx_status_create(struct mlx5e_ipsec *ipsec, { int err; - err = ipsec_rx_status_drop_create(ipsec, rx); + err = ipsec_rx_status_drop_all_create(ipsec, rx); if (err) return err; @@ -529,7 +678,7 @@ static int rx_create(struct mlx5_core_dev *mdev, struct mlx5e_ipsec *ipsec, if (err) return err; - ft = ipsec_ft_create(attr.ns, attr.status_level, attr.prio, 1, 0); + ft = ipsec_ft_create(attr.ns, attr.status_level, attr.prio, 3, 0); if (IS_ERR(ft)) { err = PTR_ERR(ft); goto err_fs_ft_status; @@ -1159,29 +1308,48 @@ static int setup_modify_header(struct mlx5e_ipsec *ipsec, int type, u32 val, u8 struct mlx5_flow_act *flow_act) { enum mlx5_flow_namespace_type ns_type = ipsec_fs_get_ns(ipsec, type, dir); - u8 action[MLX5_UN_SZ_BYTES(set_add_copy_action_in_auto)] = {}; + u8 action[3][MLX5_UN_SZ_BYTES(set_add_copy_action_in_auto)] = {}; struct mlx5_core_dev *mdev = ipsec->mdev; struct mlx5_modify_hdr *modify_hdr; + u8 num_of_actions = 1; - MLX5_SET(set_action_in, action, action_type, MLX5_ACTION_TYPE_SET); + MLX5_SET(set_action_in, action[0], action_type, MLX5_ACTION_TYPE_SET); switch (dir) { case XFRM_DEV_OFFLOAD_IN: - MLX5_SET(set_action_in, action, field, + MLX5_SET(set_action_in, action[0], field, MLX5_ACTION_IN_FIELD_METADATA_REG_B); + + num_of_actions++; + MLX5_SET(set_action_in, action[1], action_type, MLX5_ACTION_TYPE_SET); + MLX5_SET(set_action_in, action[1], field, MLX5_ACTION_IN_FIELD_METADATA_REG_C_2); + MLX5_SET(set_action_in, action[1], data, val); + MLX5_SET(set_action_in, action[1], offset, 0); + MLX5_SET(set_action_in, action[1], length, 32); + + if (type == XFRM_DEV_OFFLOAD_CRYPTO) { + num_of_actions++; + MLX5_SET(set_action_in, action[2], action_type, + MLX5_ACTION_TYPE_SET); + MLX5_SET(set_action_in, action[2], field, + MLX5_ACTION_IN_FIELD_METADATA_REG_C_4); + MLX5_SET(set_action_in, action[2], data, 0); + MLX5_SET(set_action_in, action[2], offset, 0); + MLX5_SET(set_action_in, action[2], length, 32); + } break; case XFRM_DEV_OFFLOAD_OUT: - MLX5_SET(set_action_in, action, field, + MLX5_SET(set_action_in, action[0], field, MLX5_ACTION_IN_FIELD_METADATA_REG_C_4); break; default: return -EINVAL; } - MLX5_SET(set_action_in, action, data, val); - MLX5_SET(set_action_in, action, offset, 0); - MLX5_SET(set_action_in, action, length, 32); + MLX5_SET(set_action_in, action[0], data, val); + MLX5_SET(set_action_in, action[0], offset, 0); + MLX5_SET(set_action_in, action[0], length, 32); - modify_hdr = mlx5_modify_header_alloc(mdev, ns_type, 1, action); + modify_hdr = mlx5_modify_header_alloc(mdev, ns_type, num_of_actions, action); if (IS_ERR(modify_hdr)) { mlx5_core_err(mdev, "Failed to allocate modify_header %ld\n", PTR_ERR(modify_hdr)); @@ -1479,6 +1647,15 @@ static int rx_add_rule(struct mlx5e_ipsec_sa_entry *sa_entry) mlx5_core_err(mdev, "fail to add RX ipsec rule err=%d\n", err); goto err_add_flow; } + if (attrs->type == XFRM_DEV_OFFLOAD_PACKET) + err = rx_add_rule_drop_replay(sa_entry, rx); + if (err) + goto err_add_replay; + + err = rx_add_rule_drop_auth_trailer(sa_entry, rx); + if (err) + goto err_drop_reason; + kvfree(spec); sa_entry->ipsec_rule.rule = rule; @@ -1487,6 +1664,13 @@ static int rx_add_rule(struct mlx5e_ipsec_sa_entry *sa_entry) sa_entry->ipsec_rule.pkt_reformat = flow_act.pkt_reformat; return 0; +err_drop_reason: + if (sa_entry->ipsec_rule.replay.rule) { + mlx5_del_flow_rules(sa_entry->ipsec_rule.replay.rule); + mlx5_fc_destroy(mdev, sa_entry->ipsec_rule.replay.fc); + } +err_add_replay: + mlx5_del_flow_rules(rule); err_add_flow: mlx5_fc_destroy(mdev, counter); err_add_cnt: @@ -1994,6 +2178,17 @@ void mlx5e_accel_ipsec_fs_del_rule(struct mlx5e_ipsec_sa_entry *sa_entry) if (ipsec_rule->modify_hdr) mlx5_modify_header_dealloc(mdev, ipsec_rule->modify_hdr); + + mlx5_del_flow_rules(ipsec_rule->trailer.rule); + mlx5_fc_destroy(mdev, ipsec_rule->trailer.fc); + + mlx5_del_flow_rules(ipsec_rule->auth.rule); + mlx5_fc_destroy(mdev, ipsec_rule->auth.fc); + + if (ipsec_rule->replay.rule) { + mlx5_del_flow_rules(ipsec_rule->replay.rule); + mlx5_fc_destroy(mdev, ipsec_rule->replay.fc); + } mlx5_esw_ipsec_rx_id_mapping_remove(sa_entry); rx_ft_put(sa_entry->ipsec, sa_entry->attrs.family, sa_entry->attrs.type); } -- cgit v1.2.3 From c2bf84f1d1a1595dcc45fe867f0e02b331993fee Mon Sep 17 00:00:00 2001 From: Leon Romanovsky Date: Sun, 12 Nov 2023 13:50:00 +0200 Subject: net/mlx5e: Tidy up IPsec NAT-T SA discovery IPsec NAT-T packets are UDP encapsulated packets over ESP normal ones. In case they arrive to RX, the SPI and ESP are located in inner header, while the check was performed on outer header instead. That wrong check caused to the situation where received rekeying request was missed and caused to rekey timeout, which "compensated" this failure by completing rekeying. Fixes: d65954934937 ("net/mlx5e: Support IPsec NAT-T functionality") Signed-off-by: Leon Romanovsky --- .../mellanox/mlx5/core/en_accel/ipsec_fs.c | 22 ++++++++++++++++------ include/linux/mlx5/mlx5_ifc.h | 2 +- 2 files changed, 17 insertions(+), 7 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec_fs.c b/drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec_fs.c index aeb399d8dae5..7a789061c998 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec_fs.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec_fs.c @@ -1212,13 +1212,22 @@ static void setup_fte_esp(struct mlx5_flow_spec *spec) MLX5_SET(fte_match_param, spec->match_value, outer_headers.ip_protocol, IPPROTO_ESP); } -static void setup_fte_spi(struct mlx5_flow_spec *spec, u32 spi) +static void setup_fte_spi(struct mlx5_flow_spec *spec, u32 spi, bool encap) { /* SPI number */ spec->match_criteria_enable |= MLX5_MATCH_MISC_PARAMETERS; - MLX5_SET_TO_ONES(fte_match_param, spec->match_criteria, misc_parameters.outer_esp_spi); - MLX5_SET(fte_match_param, spec->match_value, misc_parameters.outer_esp_spi, spi); + if (encap) { + MLX5_SET_TO_ONES(fte_match_param, spec->match_criteria, + misc_parameters.inner_esp_spi); + MLX5_SET(fte_match_param, spec->match_value, + misc_parameters.inner_esp_spi, spi); + } else { + MLX5_SET_TO_ONES(fte_match_param, spec->match_criteria, + misc_parameters.outer_esp_spi); + MLX5_SET(fte_match_param, spec->match_value, + misc_parameters.outer_esp_spi, spi); + } } static void setup_fte_no_frags(struct mlx5_flow_spec *spec) @@ -1596,8 +1605,9 @@ static int rx_add_rule(struct mlx5e_ipsec_sa_entry *sa_entry) else setup_fte_addr6(spec, attrs->saddr.a6, attrs->daddr.a6); - setup_fte_spi(spec, attrs->spi); - setup_fte_esp(spec); + setup_fte_spi(spec, attrs->spi, attrs->encap); + if (!attrs->encap) + setup_fte_esp(spec); setup_fte_no_frags(spec); setup_fte_upper_proto_match(spec, &attrs->upspec); @@ -1719,7 +1729,7 @@ static int tx_add_rule(struct mlx5e_ipsec_sa_entry *sa_entry) switch (attrs->type) { case XFRM_DEV_OFFLOAD_CRYPTO: - setup_fte_spi(spec, attrs->spi); + setup_fte_spi(spec, attrs->spi, false); setup_fte_esp(spec); setup_fte_reg_a(spec); break; diff --git a/include/linux/mlx5/mlx5_ifc.h b/include/linux/mlx5/mlx5_ifc.h index 90ca63f4bf63..3f7b664d625b 100644 --- a/include/linux/mlx5/mlx5_ifc.h +++ b/include/linux/mlx5/mlx5_ifc.h @@ -621,7 +621,7 @@ struct mlx5_ifc_fte_match_set_misc_bits { u8 reserved_at_140[0x8]; u8 bth_dst_qp[0x18]; - u8 reserved_at_160[0x20]; + u8 inner_esp_spi[0x20]; u8 outer_esp_spi[0x20]; u8 reserved_at_1a0[0x60]; }; -- cgit v1.2.3 From baac8351f74c543896b8fd40138b7ad9365587a3 Mon Sep 17 00:00:00 2001 From: Jianbo Liu Date: Wed, 11 Oct 2023 03:38:29 +0000 Subject: net/mlx5e: Reduce eswitch mode_lock protection context Currently eswitch mode_lock is so heavy, for example, it's locked during the whole process of the mode change, which may need to hold other locks. As the mode_lock is also used by IPSec to block mode and encap change now, it is easy to cause lock dependency. Since some of protections are also done by devlink lock, the eswitch mode_lock is not needed at those places, and thus the possibility of lockdep issue is reduced. Fixes: c8e350e62fc5 ("net/mlx5e: Make TC and IPsec offloads mutually exclusive on a netdev") Signed-off-by: Jianbo Liu Signed-off-by: Leon Romanovsky --- .../mellanox/mlx5/core/en_accel/ipsec_fs.c | 9 +++-- drivers/net/ethernet/mellanox/mlx5/core/eswitch.c | 35 ++++++++++++-------- drivers/net/ethernet/mellanox/mlx5/core/eswitch.h | 2 ++ .../ethernet/mellanox/mlx5/core/eswitch_offloads.c | 38 +++++++++++++--------- 4 files changed, 52 insertions(+), 32 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec_fs.c b/drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec_fs.c index 7a789061c998..c1e89dc77db9 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec_fs.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec_fs.c @@ -2110,8 +2110,11 @@ static int mlx5e_ipsec_block_tc_offload(struct mlx5_core_dev *mdev) struct mlx5_eswitch *esw = mdev->priv.eswitch; int err = 0; - if (esw) - down_write(&esw->mode_lock); + if (esw) { + err = mlx5_esw_lock(esw); + if (err) + return err; + } if (mdev->num_block_ipsec) { err = -EBUSY; @@ -2122,7 +2125,7 @@ static int mlx5e_ipsec_block_tc_offload(struct mlx5_core_dev *mdev) unlock: if (esw) - up_write(&esw->mode_lock); + mlx5_esw_unlock(esw); return err; } diff --git a/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c b/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c index 8d0b915a3121..3047d7015c52 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c @@ -1463,7 +1463,7 @@ int mlx5_eswitch_enable_locked(struct mlx5_eswitch *esw, int num_vfs) { int err; - lockdep_assert_held(&esw->mode_lock); + devl_assert_locked(priv_to_devlink(esw->dev)); if (!MLX5_CAP_ESW_FLOWTABLE_FDB(esw->dev, ft_support)) { esw_warn(esw->dev, "FDB is not supported, aborting ...\n"); @@ -1531,7 +1531,6 @@ int mlx5_eswitch_enable(struct mlx5_eswitch *esw, int num_vfs) if (toggle_lag) mlx5_lag_disable_change(esw->dev); - down_write(&esw->mode_lock); if (!mlx5_esw_is_fdb_created(esw)) { ret = mlx5_eswitch_enable_locked(esw, num_vfs); } else { @@ -1554,8 +1553,6 @@ int mlx5_eswitch_enable(struct mlx5_eswitch *esw, int num_vfs) } } - up_write(&esw->mode_lock); - if (toggle_lag) mlx5_lag_enable_change(esw->dev); @@ -1569,12 +1566,11 @@ void mlx5_eswitch_disable_sriov(struct mlx5_eswitch *esw, bool clear_vf) return; devl_assert_locked(priv_to_devlink(esw->dev)); - down_write(&esw->mode_lock); /* If driver is unloaded, this function is called twice by remove_one() * and mlx5_unload(). Prevent the second call. */ if (!esw->esw_funcs.num_vfs && !esw->esw_funcs.num_ec_vfs && !clear_vf) - goto unlock; + return; esw_info(esw->dev, "Unload vfs: mode(%s), nvfs(%d), necvfs(%d), active vports(%d)\n", esw->mode == MLX5_ESWITCH_LEGACY ? "LEGACY" : "OFFLOADS", @@ -1603,9 +1599,6 @@ void mlx5_eswitch_disable_sriov(struct mlx5_eswitch *esw, bool clear_vf) esw->esw_funcs.num_vfs = 0; else esw->esw_funcs.num_ec_vfs = 0; - -unlock: - up_write(&esw->mode_lock); } /* Free resources for corresponding eswitch mode. It is called by devlink @@ -1647,10 +1640,8 @@ void mlx5_eswitch_disable(struct mlx5_eswitch *esw) devl_assert_locked(priv_to_devlink(esw->dev)); mlx5_lag_disable_change(esw->dev); - down_write(&esw->mode_lock); mlx5_eswitch_disable_locked(esw); esw->mode = MLX5_ESWITCH_LEGACY; - up_write(&esw->mode_lock); mlx5_lag_enable_change(esw->dev); } @@ -2254,8 +2245,13 @@ bool mlx5_esw_hold(struct mlx5_core_dev *mdev) if (!mlx5_esw_allowed(esw)) return true; - if (down_read_trylock(&esw->mode_lock) != 0) + if (down_read_trylock(&esw->mode_lock) != 0) { + if (esw->eswitch_operation_in_progress) { + up_read(&esw->mode_lock); + return false; + } return true; + } return false; } @@ -2312,7 +2308,8 @@ int mlx5_esw_try_lock(struct mlx5_eswitch *esw) if (down_write_trylock(&esw->mode_lock) == 0) return -EINVAL; - if (atomic64_read(&esw->user_count) > 0) { + if (esw->eswitch_operation_in_progress || + atomic64_read(&esw->user_count) > 0) { up_write(&esw->mode_lock); return -EBUSY; } @@ -2320,6 +2317,18 @@ int mlx5_esw_try_lock(struct mlx5_eswitch *esw) return esw->mode; } +int mlx5_esw_lock(struct mlx5_eswitch *esw) +{ + down_write(&esw->mode_lock); + + if (esw->eswitch_operation_in_progress) { + up_write(&esw->mode_lock); + return -EBUSY; + } + + return 0; +} + /** * mlx5_esw_unlock() - Release write lock on esw mode lock * @esw: eswitch device. diff --git a/drivers/net/ethernet/mellanox/mlx5/core/eswitch.h b/drivers/net/ethernet/mellanox/mlx5/core/eswitch.h index 37ab66e7b403..b674b57d05aa 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/eswitch.h +++ b/drivers/net/ethernet/mellanox/mlx5/core/eswitch.h @@ -383,6 +383,7 @@ struct mlx5_eswitch { struct xarray paired; struct mlx5_devcom_comp_dev *devcom; u16 enabled_ipsec_vf_count; + bool eswitch_operation_in_progress; }; void esw_offloads_disable(struct mlx5_eswitch *esw); @@ -827,6 +828,7 @@ void mlx5_esw_release(struct mlx5_core_dev *dev); void mlx5_esw_get(struct mlx5_core_dev *dev); void mlx5_esw_put(struct mlx5_core_dev *dev); int mlx5_esw_try_lock(struct mlx5_eswitch *esw); +int mlx5_esw_lock(struct mlx5_eswitch *esw); void mlx5_esw_unlock(struct mlx5_eswitch *esw); void esw_vport_change_handle_locked(struct mlx5_vport *vport); diff --git a/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c b/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c index 88236e75fd90..bf78eeca401b 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c @@ -3733,13 +3733,16 @@ int mlx5_devlink_eswitch_mode_set(struct devlink *devlink, u16 mode, goto unlock; } + esw->eswitch_operation_in_progress = true; + up_write(&esw->mode_lock); + mlx5_eswitch_disable_locked(esw); if (mode == DEVLINK_ESWITCH_MODE_SWITCHDEV) { if (mlx5_devlink_trap_get_num_active(esw->dev)) { NL_SET_ERR_MSG_MOD(extack, "Can't change mode while devlink traps are active"); err = -EOPNOTSUPP; - goto unlock; + goto skip; } err = esw_offloads_start(esw, extack); } else if (mode == DEVLINK_ESWITCH_MODE_LEGACY) { @@ -3749,6 +3752,9 @@ int mlx5_devlink_eswitch_mode_set(struct devlink *devlink, u16 mode, err = -EINVAL; } +skip: + down_write(&esw->mode_lock); + esw->eswitch_operation_in_progress = false; unlock: mlx5_esw_unlock(esw); enable_lag: @@ -3759,16 +3765,12 @@ enable_lag: int mlx5_devlink_eswitch_mode_get(struct devlink *devlink, u16 *mode) { struct mlx5_eswitch *esw; - int err; esw = mlx5_devlink_eswitch_get(devlink); if (IS_ERR(esw)) return PTR_ERR(esw); - down_read(&esw->mode_lock); - err = esw_mode_to_devlink(esw->mode, mode); - up_read(&esw->mode_lock); - return err; + return esw_mode_to_devlink(esw->mode, mode); } static int mlx5_esw_vports_inline_set(struct mlx5_eswitch *esw, u8 mlx5_mode, @@ -3862,11 +3864,15 @@ int mlx5_devlink_eswitch_inline_mode_set(struct devlink *devlink, u8 mode, if (err) goto out; + esw->eswitch_operation_in_progress = true; + up_write(&esw->mode_lock); + err = mlx5_esw_vports_inline_set(esw, mlx5_mode, extack); - if (err) - goto out; + if (!err) + esw->offloads.inline_mode = mlx5_mode; - esw->offloads.inline_mode = mlx5_mode; + down_write(&esw->mode_lock); + esw->eswitch_operation_in_progress = false; up_write(&esw->mode_lock); return 0; @@ -3878,16 +3884,12 @@ out: int mlx5_devlink_eswitch_inline_mode_get(struct devlink *devlink, u8 *mode) { struct mlx5_eswitch *esw; - int err; esw = mlx5_devlink_eswitch_get(devlink); if (IS_ERR(esw)) return PTR_ERR(esw); - down_read(&esw->mode_lock); - err = esw_inline_mode_to_devlink(esw->offloads.inline_mode, mode); - up_read(&esw->mode_lock); - return err; + return esw_inline_mode_to_devlink(esw->offloads.inline_mode, mode); } bool mlx5_eswitch_block_encap(struct mlx5_core_dev *dev) @@ -3969,6 +3971,9 @@ int mlx5_devlink_eswitch_encap_mode_set(struct devlink *devlink, goto unlock; } + esw->eswitch_operation_in_progress = true; + up_write(&esw->mode_lock); + esw_destroy_offloads_fdb_tables(esw); esw->offloads.encap = encap; @@ -3982,6 +3987,9 @@ int mlx5_devlink_eswitch_encap_mode_set(struct devlink *devlink, (void)esw_create_offloads_fdb_tables(esw); } + down_write(&esw->mode_lock); + esw->eswitch_operation_in_progress = false; + unlock: up_write(&esw->mode_lock); return err; @@ -3996,9 +4004,7 @@ int mlx5_devlink_eswitch_encap_mode_get(struct devlink *devlink, if (IS_ERR(esw)) return PTR_ERR(esw); - down_read(&esw->mode_lock); *encap = esw->offloads.encap; - up_read(&esw->mode_lock); return 0; } -- cgit v1.2.3 From 4e25b661f484df54b6751b65f9ea2434a3b67539 Mon Sep 17 00:00:00 2001 From: Jianbo Liu Date: Thu, 12 Oct 2023 02:00:44 +0000 Subject: net/mlx5e: Check the number of elements before walk TC rhashtable After IPSec TX tables are destroyed, the flow rules in TC rhashtable, which have the destination to IPSec, are restored to the original one, the uplink. However, when the device is in switchdev mode and unload driver with IPSec rules configured, TC rhashtable cleanup is done before IPSec cleanup, which means tc_ht->tbl is already freed when walking TC rhashtable, in order to restore the destination. So add the checking before walking to avoid unexpected behavior. Fixes: d1569537a837 ("net/mlx5e: Modify and restore TC rules for IPSec TX rules") Signed-off-by: Jianbo Liu Signed-off-by: Leon Romanovsky --- drivers/net/ethernet/mellanox/mlx5/core/esw/ipsec_fs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/esw/ipsec_fs.c b/drivers/net/ethernet/mellanox/mlx5/core/esw/ipsec_fs.c index 5a0047bdcb51..190f10aba170 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/esw/ipsec_fs.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/esw/ipsec_fs.c @@ -152,7 +152,7 @@ void mlx5_esw_ipsec_restore_dest_uplink(struct mlx5_core_dev *mdev) xa_for_each(&esw->offloads.vport_reps, i, rep) { rpriv = rep->rep_data[REP_ETH].priv; - if (!rpriv || !rpriv->netdev) + if (!rpriv || !rpriv->netdev || !atomic_read(&rpriv->tc_ht.nelems)) continue; rhashtable_walk_enter(&rpriv->tc_ht, &iter); -- cgit v1.2.3 From 762a55a54eec4217e4cec9265ab6e5d4c11b61bd Mon Sep 17 00:00:00 2001 From: Chris Mi Date: Mon, 30 Oct 2023 15:44:47 +0200 Subject: net/mlx5e: Disable IPsec offload support if not FW steering IPsec FDB offload can only work with FW steering as of now, disable the cap upon non FW steering. And since the IPSec cap is dynamic now based on steering mode. Cleanup the resources if they exist instead of checking the IPsec cap again. Fixes: edd8b295f9e2 ("Merge branch 'mlx5-ipsec-packet-offload-support-in-eswitch-mode'") Signed-off-by: Chris Mi Signed-off-by: Leon Romanovsky --- .../ethernet/mellanox/mlx5/core/en_accel/ipsec.c | 26 +++++++++------------- .../mellanox/mlx5/core/en_accel/ipsec_offload.c | 8 ++++++- 2 files changed, 18 insertions(+), 16 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec.c b/drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec.c index 914b9e6eb7db..161c5190c236 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec.c @@ -935,9 +935,11 @@ void mlx5e_ipsec_cleanup(struct mlx5e_priv *priv) return; mlx5e_accel_ipsec_fs_cleanup(ipsec); - if (mlx5_ipsec_device_caps(priv->mdev) & MLX5_IPSEC_CAP_TUNNEL) + if (ipsec->netevent_nb.notifier_call) { unregister_netevent_notifier(&ipsec->netevent_nb); - if (mlx5_ipsec_device_caps(priv->mdev) & MLX5_IPSEC_CAP_PACKET_OFFLOAD) + ipsec->netevent_nb.notifier_call = NULL; + } + if (ipsec->aso) mlx5e_ipsec_aso_cleanup(ipsec); destroy_workqueue(ipsec->wq); kfree(ipsec); @@ -1046,6 +1048,12 @@ static int mlx5e_xfrm_validate_policy(struct mlx5_core_dev *mdev, } } + if (x->xdo.type == XFRM_DEV_OFFLOAD_PACKET && + !(mlx5_ipsec_device_caps(mdev) & MLX5_IPSEC_CAP_PACKET_OFFLOAD)) { + NL_SET_ERR_MSG_MOD(extack, "Packet offload is not supported"); + return -EINVAL; + } + return 0; } @@ -1141,14 +1149,6 @@ static const struct xfrmdev_ops mlx5e_ipsec_xfrmdev_ops = { .xdo_dev_state_free = mlx5e_xfrm_free_state, .xdo_dev_offload_ok = mlx5e_ipsec_offload_ok, .xdo_dev_state_advance_esn = mlx5e_xfrm_advance_esn_state, -}; - -static const struct xfrmdev_ops mlx5e_ipsec_packet_xfrmdev_ops = { - .xdo_dev_state_add = mlx5e_xfrm_add_state, - .xdo_dev_state_delete = mlx5e_xfrm_del_state, - .xdo_dev_state_free = mlx5e_xfrm_free_state, - .xdo_dev_offload_ok = mlx5e_ipsec_offload_ok, - .xdo_dev_state_advance_esn = mlx5e_xfrm_advance_esn_state, .xdo_dev_state_update_curlft = mlx5e_xfrm_update_curlft, .xdo_dev_policy_add = mlx5e_xfrm_add_policy, @@ -1166,11 +1166,7 @@ void mlx5e_ipsec_build_netdev(struct mlx5e_priv *priv) mlx5_core_info(mdev, "mlx5e: IPSec ESP acceleration enabled\n"); - if (mlx5_ipsec_device_caps(mdev) & MLX5_IPSEC_CAP_PACKET_OFFLOAD) - netdev->xfrmdev_ops = &mlx5e_ipsec_packet_xfrmdev_ops; - else - netdev->xfrmdev_ops = &mlx5e_ipsec_xfrmdev_ops; - + netdev->xfrmdev_ops = &mlx5e_ipsec_xfrmdev_ops; netdev->features |= NETIF_F_HW_ESP; netdev->hw_enc_features |= NETIF_F_HW_ESP; diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec_offload.c b/drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec_offload.c index 4e018fba2d5f..6e00afe4671b 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec_offload.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec_offload.c @@ -6,6 +6,8 @@ #include "ipsec.h" #include "lib/crypto.h" #include "lib/ipsec_fs_roce.h" +#include "fs_core.h" +#include "eswitch.h" enum { MLX5_IPSEC_ASO_REMOVE_FLOW_PKT_CNT_OFFSET, @@ -38,7 +40,10 @@ u32 mlx5_ipsec_device_caps(struct mlx5_core_dev *mdev) MLX5_CAP_ETH(mdev, insert_trailer) && MLX5_CAP_ETH(mdev, swp)) caps |= MLX5_IPSEC_CAP_CRYPTO; - if (MLX5_CAP_IPSEC(mdev, ipsec_full_offload)) { + if (MLX5_CAP_IPSEC(mdev, ipsec_full_offload) && + (mdev->priv.steering->mode == MLX5_FLOW_STEERING_MODE_DMFS || + (mdev->priv.steering->mode == MLX5_FLOW_STEERING_MODE_SMFS && + is_mdev_legacy_mode(mdev)))) { if (MLX5_CAP_FLOWTABLE_NIC_TX(mdev, reformat_add_esp_trasport) && MLX5_CAP_FLOWTABLE_NIC_RX(mdev, @@ -559,6 +564,7 @@ void mlx5e_ipsec_aso_cleanup(struct mlx5e_ipsec *ipsec) dma_unmap_single(pdev, aso->dma_addr, sizeof(aso->ctx), DMA_BIDIRECTIONAL); kfree(aso); + ipsec->aso = NULL; } static void mlx5e_ipsec_aso_copy(struct mlx5_wqe_aso_ctrl_seg *ctrl, -- cgit v1.2.3 From eab0da38912ebdad922ed0388209f7eb0a5163cd Mon Sep 17 00:00:00 2001 From: Moshe Shemesh Date: Wed, 21 Sep 2022 18:45:11 +0300 Subject: net/mlx5e: Fix possible deadlock on mlx5e_tx_timeout_work Due to the cited patch, devlink health commands take devlink lock and this may result in deadlock for mlx5e_tx_reporter as it takes local state_lock before calling devlink health report and on the other hand devlink health commands such as diagnose for same reporter take local state_lock after taking devlink lock (see kernel log below). To fix it, remove local state_lock from mlx5e_tx_timeout_work() before calling devlink_health_report() and take care to cancel the work before any call to close channels, which may free the SQs that should be handled by the work. Before cancel_work_sync(), use current_work() to check we are not calling it from within the work, as mlx5e_tx_timeout_work() itself may close the channels and reopen as part of recovery flow. While removing state_lock from mlx5e_tx_timeout_work() keep rtnl_lock to ensure no change in netdev->real_num_tx_queues, but use rtnl_trylock() and a flag to avoid deadlock by calling cancel_work_sync() before closing the channels while holding rtnl_lock too. Kernel log: ====================================================== WARNING: possible circular locking dependency detected 6.0.0-rc3_for_upstream_debug_2022_08_30_13_10 #1 Not tainted ------------------------------------------------------ kworker/u16:2/65 is trying to acquire lock: ffff888122f6c2f8 (&devlink->lock_key#2){+.+.}-{3:3}, at: devlink_health_report+0x2f1/0x7e0 but task is already holding lock: ffff888121d20be0 (&priv->state_lock){+.+.}-{3:3}, at: mlx5e_tx_timeout_work+0x70/0x280 [mlx5_core] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&priv->state_lock){+.+.}-{3:3}: __mutex_lock+0x12c/0x14b0 mlx5e_rx_reporter_diagnose+0x71/0x700 [mlx5_core] devlink_nl_cmd_health_reporter_diagnose_doit+0x212/0xa50 genl_family_rcv_msg_doit+0x1e9/0x2f0 genl_rcv_msg+0x2e9/0x530 netlink_rcv_skb+0x11d/0x340 genl_rcv+0x24/0x40 netlink_unicast+0x438/0x710 netlink_sendmsg+0x788/0xc40 sock_sendmsg+0xb0/0xe0 __sys_sendto+0x1c1/0x290 __x64_sys_sendto+0xdd/0x1b0 do_syscall_64+0x3d/0x90 entry_SYSCALL_64_after_hwframe+0x46/0xb0 -> #0 (&devlink->lock_key#2){+.+.}-{3:3}: __lock_acquire+0x2c8a/0x6200 lock_acquire+0x1c1/0x550 __mutex_lock+0x12c/0x14b0 devlink_health_report+0x2f1/0x7e0 mlx5e_health_report+0xc9/0xd7 [mlx5_core] mlx5e_reporter_tx_timeout+0x2ab/0x3d0 [mlx5_core] mlx5e_tx_timeout_work+0x1c1/0x280 [mlx5_core] process_one_work+0x7c2/0x1340 worker_thread+0x59d/0xec0 kthread+0x28f/0x330 ret_from_fork+0x1f/0x30 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&priv->state_lock); lock(&devlink->lock_key#2); lock(&priv->state_lock); lock(&devlink->lock_key#2); *** DEADLOCK *** 4 locks held by kworker/u16:2/65: #0: ffff88811a55b138 ((wq_completion)mlx5e#2){+.+.}-{0:0}, at: process_one_work+0x6e2/0x1340 #1: ffff888101de7db8 ((work_completion)(&priv->tx_timeout_work)){+.+.}-{0:0}, at: process_one_work+0x70f/0x1340 #2: ffffffff84ce8328 (rtnl_mutex){+.+.}-{3:3}, at: mlx5e_tx_timeout_work+0x53/0x280 [mlx5_core] #3: ffff888121d20be0 (&priv->state_lock){+.+.}-{3:3}, at: mlx5e_tx_timeout_work+0x70/0x280 [mlx5_core] stack backtrace: CPU: 1 PID: 65 Comm: kworker/u16:2 Not tainted 6.0.0-rc3_for_upstream_debug_2022_08_30_13_10 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 Workqueue: mlx5e mlx5e_tx_timeout_work [mlx5_core] Call Trace: dump_stack_lvl+0x57/0x7d check_noncircular+0x278/0x300 ? print_circular_bug+0x460/0x460 ? find_held_lock+0x2d/0x110 ? __stack_depot_save+0x24c/0x520 ? alloc_chain_hlocks+0x228/0x700 __lock_acquire+0x2c8a/0x6200 ? register_lock_class+0x1860/0x1860 ? kasan_save_stack+0x1e/0x40 ? kasan_set_free_info+0x20/0x30 ? ____kasan_slab_free+0x11d/0x1b0 ? kfree+0x1ba/0x520 ? devlink_health_do_dump.part.0+0x171/0x3a0 ? devlink_health_report+0x3d5/0x7e0 lock_acquire+0x1c1/0x550 ? devlink_health_report+0x2f1/0x7e0 ? lockdep_hardirqs_on_prepare+0x400/0x400 ? find_held_lock+0x2d/0x110 __mutex_lock+0x12c/0x14b0 ? devlink_health_report+0x2f1/0x7e0 ? devlink_health_report+0x2f1/0x7e0 ? mutex_lock_io_nested+0x1320/0x1320 ? trace_hardirqs_on+0x2d/0x100 ? bit_wait_io_timeout+0x170/0x170 ? devlink_health_do_dump.part.0+0x171/0x3a0 ? kfree+0x1ba/0x520 ? devlink_health_do_dump.part.0+0x171/0x3a0 devlink_health_report+0x2f1/0x7e0 mlx5e_health_report+0xc9/0xd7 [mlx5_core] mlx5e_reporter_tx_timeout+0x2ab/0x3d0 [mlx5_core] ? lockdep_hardirqs_on_prepare+0x400/0x400 ? mlx5e_reporter_tx_err_cqe+0x1b0/0x1b0 [mlx5_core] ? mlx5e_tx_reporter_timeout_dump+0x70/0x70 [mlx5_core] ? mlx5e_tx_reporter_dump_sq+0x320/0x320 [mlx5_core] ? mlx5e_tx_timeout_work+0x70/0x280 [mlx5_core] ? mutex_lock_io_nested+0x1320/0x1320 ? process_one_work+0x70f/0x1340 ? lockdep_hardirqs_on_prepare+0x400/0x400 ? lock_downgrade+0x6e0/0x6e0 mlx5e_tx_timeout_work+0x1c1/0x280 [mlx5_core] process_one_work+0x7c2/0x1340 ? lockdep_hardirqs_on_prepare+0x400/0x400 ? pwq_dec_nr_in_flight+0x230/0x230 ? rwlock_bug.part.0+0x90/0x90 worker_thread+0x59d/0xec0 ? process_one_work+0x1340/0x1340 kthread+0x28f/0x330 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x1f/0x30 Fixes: c90005b5f75c ("devlink: Hold the instance lock in health callbacks") Signed-off-by: Moshe Shemesh Reviewed-by: Tariq Toukan Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/en.h | 1 + drivers/net/ethernet/mellanox/mlx5/core/en_main.c | 27 ++++++++++++++++++++--- 2 files changed, 25 insertions(+), 3 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en.h b/drivers/net/ethernet/mellanox/mlx5/core/en.h index b2a5da9739d2..729a11b5fb25 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en.h +++ b/drivers/net/ethernet/mellanox/mlx5/core/en.h @@ -826,6 +826,7 @@ enum { MLX5E_STATE_DESTROYING, MLX5E_STATE_XDP_TX_ENABLED, MLX5E_STATE_XDP_ACTIVE, + MLX5E_STATE_CHANNELS_ACTIVE, }; struct mlx5e_modify_sq_param { diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c index ea58c6917433..0c87ddb8a7a2 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c @@ -2731,6 +2731,7 @@ void mlx5e_close_channels(struct mlx5e_channels *chs) { int i; + ASSERT_RTNL(); if (chs->ptp) { mlx5e_ptp_close(chs->ptp); chs->ptp = NULL; @@ -3012,17 +3013,29 @@ void mlx5e_activate_priv_channels(struct mlx5e_priv *priv) if (mlx5e_is_vport_rep(priv)) mlx5e_rep_activate_channels(priv); + set_bit(MLX5E_STATE_CHANNELS_ACTIVE, &priv->state); + mlx5e_wait_channels_min_rx_wqes(&priv->channels); if (priv->rx_res) mlx5e_rx_res_channels_activate(priv->rx_res, &priv->channels); } +static void mlx5e_cancel_tx_timeout_work(struct mlx5e_priv *priv) +{ + WARN_ON_ONCE(test_bit(MLX5E_STATE_CHANNELS_ACTIVE, &priv->state)); + if (current_work() != &priv->tx_timeout_work) + cancel_work_sync(&priv->tx_timeout_work); +} + void mlx5e_deactivate_priv_channels(struct mlx5e_priv *priv) { if (priv->rx_res) mlx5e_rx_res_channels_deactivate(priv->rx_res); + clear_bit(MLX5E_STATE_CHANNELS_ACTIVE, &priv->state); + mlx5e_cancel_tx_timeout_work(priv); + if (mlx5e_is_vport_rep(priv)) mlx5e_rep_deactivate_channels(priv); @@ -4801,8 +4814,17 @@ static void mlx5e_tx_timeout_work(struct work_struct *work) struct net_device *netdev = priv->netdev; int i; - rtnl_lock(); - mutex_lock(&priv->state_lock); + /* Take rtnl_lock to ensure no change in netdev->real_num_tx_queues + * through this flow. However, channel closing flows have to wait for + * this work to finish while holding rtnl lock too. So either get the + * lock or find that channels are being closed for other reason and + * this work is not relevant anymore. + */ + while (!rtnl_trylock()) { + if (!test_bit(MLX5E_STATE_CHANNELS_ACTIVE, &priv->state)) + return; + msleep(20); + } if (!test_bit(MLX5E_STATE_OPENED, &priv->state)) goto unlock; @@ -4821,7 +4843,6 @@ static void mlx5e_tx_timeout_work(struct work_struct *work) } unlock: - mutex_unlock(&priv->state_lock); rtnl_unlock(); } -- cgit v1.2.3 From ccbe33003b109f14c4dde2a4fca9c2a50c423601 Mon Sep 17 00:00:00 2001 From: Chris Mi Date: Mon, 11 Sep 2023 13:28:10 +0300 Subject: net/mlx5e: TC, Don't offload post action rule if not supported If post action is not supported, eg. ignore_flow_level is not supported, don't offload post action rule. Otherwise, will hit panic [1]. Fix it by checking if post action table is valid or not. [1] [445537.863880] BUG: unable to handle page fault for address: ffffffffffffffb1 [445537.864617] #PF: supervisor read access in kernel mode [445537.865244] #PF: error_code(0x0000) - not-present page [445537.865860] PGD 70683a067 P4D 70683a067 PUD 70683c067 PMD 0 [445537.866497] Oops: 0000 [#1] PREEMPT SMP NOPTI [445537.867077] CPU: 19 PID: 248742 Comm: tc Kdump: loaded Tainted: G O 6.5.0+ #1 [445537.867888] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [445537.868834] RIP: 0010:mlx5e_tc_post_act_add+0x51/0x130 [mlx5_core] [445537.869635] Code: c0 0d 00 00 e8 20 96 c6 d3 48 85 c0 0f 84 e5 00 00 00 c7 83 b0 01 00 00 00 00 00 00 49 89 c5 31 c0 31 d2 66 89 83 b4 01 00 00 <49> 8b 44 24 10 83 23 df 83 8b d8 01 00 00 04 48 89 83 c0 01 00 00 [445537.871318] RSP: 0018:ffffb98741cef428 EFLAGS: 00010246 [445537.871962] RAX: 0000000000000000 RBX: ffff8df341167000 RCX: 0000000000000001 [445537.872704] RDX: 0000000000000000 RSI: ffffffff954844e1 RDI: ffffffff9546e9cb [445537.873430] RBP: ffffb98741cef448 R08: 0000000000000020 R09: 0000000000000246 [445537.874160] R10: 0000000000000000 R11: ffffffff943f73ff R12: ffffffffffffffa1 [445537.874893] R13: ffff8df36d336c20 R14: ffffffffffffffa1 R15: ffff8df341167000 [445537.875628] FS: 00007fcd6564f800(0000) GS:ffff8dfa9ea00000(0000) knlGS:0000000000000000 [445537.876425] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [445537.877090] CR2: ffffffffffffffb1 CR3: 00000003b5884001 CR4: 0000000000770ee0 [445537.877832] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [445537.878564] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [445537.879300] PKRU: 55555554 [445537.879797] Call Trace: [445537.880263] [445537.880713] ? show_regs+0x6e/0x80 [445537.881232] ? __die+0x29/0x70 [445537.881731] ? page_fault_oops+0x85/0x160 [445537.882276] ? search_exception_tables+0x65/0x70 [445537.882852] ? kernelmode_fixup_or_oops+0xa2/0x120 [445537.883432] ? __bad_area_nosemaphore+0x18b/0x250 [445537.884019] ? bad_area_nosemaphore+0x16/0x20 [445537.884566] ? do_kern_addr_fault+0x8b/0xa0 [445537.885105] ? exc_page_fault+0xf5/0x1c0 [445537.885623] ? asm_exc_page_fault+0x2b/0x30 [445537.886149] ? __kmem_cache_alloc_node+0x1df/0x2a0 [445537.886717] ? mlx5e_tc_post_act_add+0x51/0x130 [mlx5_core] [445537.887431] ? mlx5e_tc_post_act_add+0x30/0x130 [mlx5_core] [445537.888172] alloc_flow_post_acts+0xfb/0x1c0 [mlx5_core] [445537.888849] parse_tc_actions+0x582/0x5c0 [mlx5_core] [445537.889505] parse_tc_fdb_actions+0xd7/0x1f0 [mlx5_core] [445537.890175] __mlx5e_add_fdb_flow+0x1ab/0x2b0 [mlx5_core] [445537.890843] mlx5e_add_fdb_flow+0x56/0x120 [mlx5_core] [445537.891491] ? debug_smp_processor_id+0x1b/0x30 [445537.892037] mlx5e_tc_add_flow+0x79/0x90 [mlx5_core] [445537.892676] mlx5e_configure_flower+0x305/0x450 [mlx5_core] [445537.893341] mlx5e_rep_setup_tc_cls_flower+0x3d/0x80 [mlx5_core] [445537.894037] mlx5e_rep_setup_tc_cb+0x5c/0xa0 [mlx5_core] [445537.894693] tc_setup_cb_add+0xdc/0x220 [445537.895177] fl_hw_replace_filter+0x15f/0x220 [cls_flower] [445537.895767] fl_change+0xe87/0x1190 [cls_flower] [445537.896302] tc_new_tfilter+0x484/0xa50 Fixes: f0da4daa3413 ("net/mlx5e: Refactor ct to use post action infrastructure") Signed-off-by: Chris Mi Reviewed-by: Jianbo Liu Signed-off-by: Saeed Mahameed Reviewed-by: Automatic Verification Reviewed-by: Maher Sanalla Reviewed-by: Shay Drory Reviewed-by: Moshe Shemesh Reviewed-by: Shachar Kagan Reviewed-by: Tariq Toukan --- .../ethernet/mellanox/mlx5/core/en/tc/post_act.c | 6 ++++++ drivers/net/ethernet/mellanox/mlx5/core/en_tc.c | 25 ++++++++++++++++++---- 2 files changed, 27 insertions(+), 4 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en/tc/post_act.c b/drivers/net/ethernet/mellanox/mlx5/core/en/tc/post_act.c index 4e923a2874ae..86bf007fd05b 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en/tc/post_act.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en/tc/post_act.c @@ -83,6 +83,9 @@ mlx5e_tc_post_act_offload(struct mlx5e_post_act *post_act, struct mlx5_flow_spec *spec; int err; + if (IS_ERR(post_act)) + return PTR_ERR(post_act); + spec = kvzalloc(sizeof(*spec), GFP_KERNEL); if (!spec) return -ENOMEM; @@ -111,6 +114,9 @@ mlx5e_tc_post_act_add(struct mlx5e_post_act *post_act, struct mlx5_flow_attr *po struct mlx5e_post_act_handle *handle; int err; + if (IS_ERR(post_act)) + return ERR_CAST(post_act); + handle = kzalloc(sizeof(*handle), GFP_KERNEL); if (!handle) return ERR_PTR(-ENOMEM); diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c b/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c index 7ca9e5b86778..4809a66f3491 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c @@ -444,6 +444,9 @@ mlx5e_tc_add_flow_meter(struct mlx5e_priv *priv, struct mlx5e_flow_meter_handle *meter; enum mlx5e_post_meter_type type; + if (IS_ERR(post_act)) + return PTR_ERR(post_act); + meter = mlx5e_tc_meter_replace(priv->mdev, &attr->meter_attr.params); if (IS_ERR(meter)) { mlx5_core_err(priv->mdev, "Failed to get flow meter\n"); @@ -3738,6 +3741,20 @@ out_free: return err; } +static int +set_branch_dest_ft(struct mlx5e_priv *priv, struct mlx5_flow_attr *attr) +{ + struct mlx5e_post_act *post_act = get_post_action(priv); + + if (IS_ERR(post_act)) + return PTR_ERR(post_act); + + attr->action |= MLX5_FLOW_CONTEXT_ACTION_FWD_DEST; + attr->dest_ft = mlx5e_tc_post_act_get_ft(post_act); + + return 0; +} + static int alloc_branch_attr(struct mlx5e_tc_flow *flow, struct mlx5e_tc_act_branch_ctrl *cond, @@ -3761,8 +3778,8 @@ alloc_branch_attr(struct mlx5e_tc_flow *flow, break; case FLOW_ACTION_ACCEPT: case FLOW_ACTION_PIPE: - attr->action |= MLX5_FLOW_CONTEXT_ACTION_FWD_DEST; - attr->dest_ft = mlx5e_tc_post_act_get_ft(get_post_action(flow->priv)); + if (set_branch_dest_ft(flow->priv, attr)) + goto out_err; break; case FLOW_ACTION_JUMP: if (*jump_count) { @@ -3771,8 +3788,8 @@ alloc_branch_attr(struct mlx5e_tc_flow *flow, goto out_err; } *jump_count = cond->extval; - attr->action |= MLX5_FLOW_CONTEXT_ACTION_FWD_DEST; - attr->dest_ft = mlx5e_tc_post_act_get_ft(get_post_action(flow->priv)); + if (set_branch_dest_ft(flow->priv, attr)) + goto out_err; break; default: err = -EOPNOTSUPP; -- cgit v1.2.3 From 3d7a3f2612d75de5f371a681038b089ded6667eb Mon Sep 17 00:00:00 2001 From: Moshe Shemesh Date: Mon, 7 Aug 2023 13:11:32 +0300 Subject: net/mlx5: Nack sync reset request when HotPlug is enabled Current sync reset flow is not supported when PCIe bridge connected directly to mlx5 device has HotPlug interrupt enabled and can be triggered on link state change event. Return nack on reset request in such case. Fixes: 92501fa6e421 ("net/mlx5: Ack on sync_reset_request only if PF can do reset_now") Signed-off-by: Moshe Shemesh Reviewed-by: Shay Drory Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/fw_reset.c | 29 ++++++++++++++++++++++ 1 file changed, 29 insertions(+) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/fw_reset.c b/drivers/net/ethernet/mellanox/mlx5/core/fw_reset.c index b568988e92e3..c4e19d627da2 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/fw_reset.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/fw_reset.c @@ -325,6 +325,29 @@ static void mlx5_fw_live_patch_event(struct work_struct *work) mlx5_core_err(dev, "Failed to reload FW tracer\n"); } +#if IS_ENABLED(CONFIG_HOTPLUG_PCI_PCIE) +static int mlx5_check_hotplug_interrupt(struct mlx5_core_dev *dev) +{ + struct pci_dev *bridge = dev->pdev->bus->self; + u16 reg16; + int err; + + if (!bridge) + return -EOPNOTSUPP; + + err = pcie_capability_read_word(bridge, PCI_EXP_SLTCTL, ®16); + if (err) + return err; + + if ((reg16 & PCI_EXP_SLTCTL_HPIE) && (reg16 & PCI_EXP_SLTCTL_DLLSCE)) { + mlx5_core_warn(dev, "FW reset is not supported as HotPlug is enabled\n"); + return -EOPNOTSUPP; + } + + return 0; +} +#endif + static int mlx5_check_dev_ids(struct mlx5_core_dev *dev, u16 dev_id) { struct pci_bus *bridge_bus = dev->pdev->bus; @@ -357,6 +380,12 @@ static bool mlx5_is_reset_now_capable(struct mlx5_core_dev *dev) return false; } +#if IS_ENABLED(CONFIG_HOTPLUG_PCI_PCIE) + err = mlx5_check_hotplug_interrupt(dev); + if (err) + return false; +#endif + err = pci_read_config_word(dev->pdev, PCI_DEVICE_ID, &dev_id); if (err) return false; -- cgit v1.2.3 From 7aaf975238c47b710fcc4eca0da1e7902a53abe2 Mon Sep 17 00:00:00 2001 From: Gavin Li Date: Thu, 31 Aug 2023 05:47:09 +0300 Subject: net/mlx5e: Check netdev pointer before checking its net ns Previously, when comparing the net namespaces, the case where the netdev doesn't exist wasn't taken into account, and therefore can cause a crash. In such a case, the comparing function should return false, as there is no netdev->net to compare the devlink->net to. Furthermore, this will result in an attempt to enter switchdev mode without a netdev to fail, and which is the desired result as there is no meaning in switchdev mode without a net device. Fixes: 662404b24a4c ("net/mlx5e: Block entering switchdev mode with ns inconsistency") Signed-off-by: Gavin Li Reviewed-by: Gavi Teitz Signed-off-by: Saeed Mahameed --- .../net/ethernet/mellanox/mlx5/core/eswitch_offloads.c | 16 ++++++++++------ 1 file changed, 10 insertions(+), 6 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c b/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c index bf78eeca401b..bb8bcb448ae9 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c @@ -3653,14 +3653,18 @@ static int esw_inline_mode_to_devlink(u8 mlx5_mode, u8 *mode) static bool esw_offloads_devlink_ns_eq_netdev_ns(struct devlink *devlink) { + struct mlx5_core_dev *dev = devlink_priv(devlink); struct net *devl_net, *netdev_net; - struct mlx5_eswitch *esw; - - esw = mlx5_devlink_eswitch_nocheck_get(devlink); - netdev_net = dev_net(esw->dev->mlx5e_res.uplink_netdev); - devl_net = devlink_net(devlink); + bool ret = false; - return net_eq(devl_net, netdev_net); + mutex_lock(&dev->mlx5e_res.uplink_netdev_lock); + if (dev->mlx5e_res.uplink_netdev) { + netdev_net = dev_net(dev->mlx5e_res.uplink_netdev); + devl_net = devlink_net(devlink); + ret = net_eq(devl_net, netdev_net); + } + mutex_unlock(&dev->mlx5e_res.uplink_netdev_lock); + return ret; } int mlx5_eswitch_block_mode(struct mlx5_core_dev *dev) -- cgit v1.2.3 From ca4ef28d0ad831d2521fa2b16952f37fd9324ca3 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Fri, 3 Nov 2023 09:36:20 +0300 Subject: net/mlx5: Fix a NULL vs IS_ERR() check The mlx5_esw_offloads_devlink_port() function returns error pointers, not NULL. Fixes: 7bef147a6ab6 ("net/mlx5: Don't skip vport check") Signed-off-by: Dan Carpenter Reviewed-by: Wojciech Drewek Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/en_rep.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c b/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c index 3ab682bbcf86..1bf7540a65ad 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c @@ -1497,7 +1497,7 @@ mlx5e_vport_vf_rep_load(struct mlx5_core_dev *dev, struct mlx5_eswitch_rep *rep) dl_port = mlx5_esw_offloads_devlink_port(dev->priv.eswitch, rpriv->rep->vport); - if (dl_port) { + if (!IS_ERR(dl_port)) { SET_NETDEV_DEVLINK_PORT(netdev, dl_port); mlx5e_rep_vnic_reporter_create(priv, dl_port); } -- cgit v1.2.3 From 26513300978f7285c3e776c144f27ef71be61f57 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Mon, 4 Dec 2023 08:27:36 +0100 Subject: drm/bridge: tc358768: select CONFIG_VIDEOMODE_HELPERS A dependency on this feature was recently introduced: x86_64-linux-ld: vmlinux.o: in function `tc358768_bridge_pre_enable': tc358768.c:(.text+0xbe3dae): undefined reference to `drm_display_mode_to_videomode' Make sure this is always enabled. Fixes: e5fb21678136 ("drm/bridge: tc358768: Use struct videomode") Signed-off-by: Arnd Bergmann Reviewed-by: Neil Armstrong Link: https://lore.kernel.org/r/20231204072814.968816-1-arnd@kernel.org Signed-off-by: Neil Armstrong Link: https://patchwork.freedesktop.org/patch/msgid/20231204072814.968816-1-arnd@kernel.org --- drivers/gpu/drm/bridge/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpu/drm/bridge/Kconfig b/drivers/gpu/drm/bridge/Kconfig index ba82a1142adf..3e6a4e2044c0 100644 --- a/drivers/gpu/drm/bridge/Kconfig +++ b/drivers/gpu/drm/bridge/Kconfig @@ -313,6 +313,7 @@ config DRM_TOSHIBA_TC358768 select REGMAP_I2C select DRM_PANEL select DRM_MIPI_DSI + select VIDEOMODE_HELPERS help Toshiba TC358768AXBG/TC358778XBG DSI bridge chip driver. -- cgit v1.2.3 From 209043cf092d7b0d4739921b3f11d6d0b451eabf Mon Sep 17 00:00:00 2001 From: Nathan Rossi Date: Mon, 6 Nov 2023 02:14:36 +0000 Subject: arm64: dts: imx8mp: imx8mq: Add parkmode-disable-ss-quirk on DWC3 The i.MX8MP and i.MX8MQ devices both use the same DWC3 controller and are both affected by a known issue with the controller due to specific behaviour when park mode is enabled in SuperSpeed host mode operation. Under heavy USB traffic from multiple endpoints the controller will sometimes incorrectly process transactions such that some transactions are lost, or the controller may hang when processing transactions. When the controller hangs it does not recover. This issue is documented partially within the linux-imx vendor kernel which references a Synopsys STAR number 9001415732 in commits [1] and additional details in [2]. Those commits provide some additional controller internal implementation specifics around the incorrect behaviour of the SuperSpeed host controller operation when park mode is enabled. The summary of this issue is that the host controller can incorrectly enter/exit park mode such that part of the controller is in a state which behaves as if in park mode even though it is not. In this state the controller incorrectly calculates the number of TRBs available which results in incorrect access of the internal caches causing the overwrite of pending requests in the cache which should have been processed but are ignored. This can cause the controller to drop the requests or hang waiting for the pending state of the dropped requests. The workaround for this issue is to disable park mode for SuperSpeed operation of the controller through the GUCTL1[17] bit. This is already available as a quirk for the DWC3 controller and can be enabled via the 'snps,parkmode-disable-ss-quirk' device tree property. It is possible to replicate this failure on an i.MX8MP EVK with a USB Hub connecting 4 SuperSpeed USB flash drives. Performing continuous small read operations (dd if=/dev/sd... of=/dev/null bs=16) on the block devices will result in device errors initially and will eventually result in the controller hanging. [13240.896936] xhci-hcd xhci-hcd.0.auto: WARN Event TRB for slot 4 ep 2 with no TDs queued? [13240.990708] usb 2-1.3: reset SuperSpeed USB device number 5 using xhci-hcd [13241.015582] sd 2:0:0:0: [sdc] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x07 driverbyte=DRIVER_OK cmd_age=0s [13241.025198] sd 2:0:0:0: [sdc] tag#0 CDB: opcode=0x28 28 00 00 00 03 e0 00 01 00 00 [13241.032949] I/O error, dev sdc, sector 992 op 0x0:(READ) flags 0x80700 phys_seg 25 prio class 2 [13272.150710] usb 2-1.2: reset SuperSpeed USB device number 4 using xhci-hcd [13272.175469] sd 1:0:0:0: [sdb] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x03 driverbyte=DRIVER_OK cmd_age=31s [13272.185365] sd 1:0:0:0: [sdb] tag#0 CDB: opcode=0x28 28 00 00 00 03 e0 00 01 00 00 [13272.193385] I/O error, dev sdb, sector 992 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 2 [13434.846556] xhci-hcd xhci-hcd.0.auto: xHCI host not responding to stop endpoint command [13434.854592] xhci-hcd xhci-hcd.0.auto: xHCI host controller not responding, assume dead [13434.862553] xhci-hcd xhci-hcd.0.auto: HC died; cleaning up [1] https://github.com/nxp-imx/linux-imx/commit/97a5349d936b08cf301730b59e4e8855283f815c [2] https://github.com/nxp-imx/linux-imx/commit/b4b5cbc5a12d7c3b920d1d7cba0ada3379e4e42b Fixes: fb8587a2c165 ("arm64: dtsi: imx8mp: add usb nodes") Fixes: ad37549cb5dc ("arm64: dts: imx8mq: add USB nodes") Signed-off-by: Nathan Rossi Reviewed-by: Fabio Estevam Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/imx8mp.dtsi | 2 ++ arch/arm64/boot/dts/freescale/imx8mq.dtsi | 2 ++ 2 files changed, 4 insertions(+) diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi index c9a610ba4836..1264da6012f9 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi @@ -2072,6 +2072,7 @@ phys = <&usb3_phy0>, <&usb3_phy0>; phy-names = "usb2-phy", "usb3-phy"; snps,gfladj-refclk-lpm-sel-quirk; + snps,parkmode-disable-ss-quirk; }; }; @@ -2114,6 +2115,7 @@ phys = <&usb3_phy1>, <&usb3_phy1>; phy-names = "usb2-phy", "usb3-phy"; snps,gfladj-refclk-lpm-sel-quirk; + snps,parkmode-disable-ss-quirk; }; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi index 4b1ce9fc1758..c6dc3ba0d43b 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi @@ -1649,6 +1649,7 @@ phys = <&usb3_phy0>, <&usb3_phy0>; phy-names = "usb2-phy", "usb3-phy"; power-domains = <&pgc_otg1>; + snps,parkmode-disable-ss-quirk; status = "disabled"; }; @@ -1680,6 +1681,7 @@ phys = <&usb3_phy1>, <&usb3_phy1>; phy-names = "usb2-phy", "usb3-phy"; power-domains = <&pgc_otg2>; + snps,parkmode-disable-ss-quirk; status = "disabled"; }; -- cgit v1.2.3 From 20c2dbff342aec13bf93c2f6c951da198916a455 Mon Sep 17 00:00:00 2001 From: Ville Syrjälä Date: Mon, 27 Nov 2023 16:50:25 +0200 Subject: drm/i915: Skip some timing checks on BXT/GLK DSI transcoders MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Apparently some BXT/GLK systems have DSI panels whose timings don't agree with the normal cpu transcoder hblank>=32 limitation. This is perhaps fine as there are no specific hblank/etc. limits listed for the BXT/GLK DSI transcoders. Move those checks out from the global intel_mode_valid() into into connector specific .mode_valid() hooks, skipping BXT/GLK DSI connectors. We'll leave the basic [hv]display/[hv]total checks in intel_mode_valid() as those seem like sensible upper limits regardless of the transcoder used. Cc: stable@vger.kernel.org Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/9720 Fixes: 8f4b1068e7fc ("drm/i915: Check some transcoder timing minimum limits") Signed-off-by: Ville Syrjälä Link: https://patchwork.freedesktop.org/patch/msgid/20231127145028.4899-1-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula (cherry picked from commit e0ef2daa8ca8ce4dbc2fd0959e383b753a87fd7d) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/display/icl_dsi.c | 7 +++++++ drivers/gpu/drm/i915/display/intel_crt.c | 5 +++++ drivers/gpu/drm/i915/display/intel_display.c | 10 ++++++++++ drivers/gpu/drm/i915/display/intel_display.h | 3 +++ drivers/gpu/drm/i915/display/intel_dp.c | 4 ++++ drivers/gpu/drm/i915/display/intel_dp_mst.c | 4 ++++ drivers/gpu/drm/i915/display/intel_dvo.c | 6 ++++++ drivers/gpu/drm/i915/display/intel_hdmi.c | 4 ++++ drivers/gpu/drm/i915/display/intel_lvds.c | 5 +++++ drivers/gpu/drm/i915/display/intel_sdvo.c | 8 +++++++- drivers/gpu/drm/i915/display/intel_tv.c | 8 +++++++- drivers/gpu/drm/i915/display/vlv_dsi.c | 18 +++++++++++++++++- 12 files changed, 79 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/i915/display/icl_dsi.c b/drivers/gpu/drm/i915/display/icl_dsi.c index c4585e445198..67143a0f5189 100644 --- a/drivers/gpu/drm/i915/display/icl_dsi.c +++ b/drivers/gpu/drm/i915/display/icl_dsi.c @@ -1440,6 +1440,13 @@ static void gen11_dsi_post_disable(struct intel_atomic_state *state, static enum drm_mode_status gen11_dsi_mode_valid(struct drm_connector *connector, struct drm_display_mode *mode) { + struct drm_i915_private *i915 = to_i915(connector->dev); + enum drm_mode_status status; + + status = intel_cpu_transcoder_mode_valid(i915, mode); + if (status != MODE_OK) + return status; + /* FIXME: DSC? */ return intel_dsi_mode_valid(connector, mode); } diff --git a/drivers/gpu/drm/i915/display/intel_crt.c b/drivers/gpu/drm/i915/display/intel_crt.c index 913e5d230a4d..6f6b348b8a40 100644 --- a/drivers/gpu/drm/i915/display/intel_crt.c +++ b/drivers/gpu/drm/i915/display/intel_crt.c @@ -348,8 +348,13 @@ intel_crt_mode_valid(struct drm_connector *connector, struct drm_device *dev = connector->dev; struct drm_i915_private *dev_priv = to_i915(dev); int max_dotclk = dev_priv->max_dotclk_freq; + enum drm_mode_status status; int max_clock; + status = intel_cpu_transcoder_mode_valid(dev_priv, mode); + if (status != MODE_OK) + return status; + if (mode->flags & DRM_MODE_FLAG_DBLSCAN) return MODE_NO_DBLESCAN; diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c index 94330108145e..4ee7d569b379 100644 --- a/drivers/gpu/drm/i915/display/intel_display.c +++ b/drivers/gpu/drm/i915/display/intel_display.c @@ -7869,6 +7869,16 @@ enum drm_mode_status intel_mode_valid(struct drm_device *dev, mode->vtotal > vtotal_max) return MODE_V_ILLEGAL; + return MODE_OK; +} + +enum drm_mode_status intel_cpu_transcoder_mode_valid(struct drm_i915_private *dev_priv, + const struct drm_display_mode *mode) +{ + /* + * Additional transcoder timing limits, + * excluding BXT/GLK DSI transcoders. + */ if (DISPLAY_VER(dev_priv) >= 5) { if (mode->hdisplay < 64 || mode->htotal - mode->hdisplay < 32) diff --git a/drivers/gpu/drm/i915/display/intel_display.h b/drivers/gpu/drm/i915/display/intel_display.h index 0e5dffe8f018..a05c7e2b782e 100644 --- a/drivers/gpu/drm/i915/display/intel_display.h +++ b/drivers/gpu/drm/i915/display/intel_display.h @@ -403,6 +403,9 @@ enum drm_mode_status intel_mode_valid_max_plane_size(struct drm_i915_private *dev_priv, const struct drm_display_mode *mode, bool bigjoiner); +enum drm_mode_status +intel_cpu_transcoder_mode_valid(struct drm_i915_private *i915, + const struct drm_display_mode *mode); enum phy intel_port_to_phy(struct drm_i915_private *i915, enum port port); bool is_trans_port_sync_mode(const struct intel_crtc_state *state); bool is_trans_port_sync_master(const struct intel_crtc_state *state); diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c index 2852958dd4e7..b21bcd40f111 100644 --- a/drivers/gpu/drm/i915/display/intel_dp.c +++ b/drivers/gpu/drm/i915/display/intel_dp.c @@ -1172,6 +1172,10 @@ intel_dp_mode_valid(struct drm_connector *_connector, enum drm_mode_status status; bool dsc = false, bigjoiner = false; + status = intel_cpu_transcoder_mode_valid(dev_priv, mode); + if (status != MODE_OK) + return status; + if (mode->flags & DRM_MODE_FLAG_DBLCLK) return MODE_H_ILLEGAL; diff --git a/drivers/gpu/drm/i915/display/intel_dp_mst.c b/drivers/gpu/drm/i915/display/intel_dp_mst.c index 851b312bd844..4816e4e77f83 100644 --- a/drivers/gpu/drm/i915/display/intel_dp_mst.c +++ b/drivers/gpu/drm/i915/display/intel_dp_mst.c @@ -959,6 +959,10 @@ intel_dp_mst_mode_valid_ctx(struct drm_connector *connector, return 0; } + *status = intel_cpu_transcoder_mode_valid(dev_priv, mode); + if (*status != MODE_OK) + return 0; + if (mode->flags & DRM_MODE_FLAG_DBLSCAN) { *status = MODE_NO_DBLESCAN; return 0; diff --git a/drivers/gpu/drm/i915/display/intel_dvo.c b/drivers/gpu/drm/i915/display/intel_dvo.c index 55d6743374bd..9111e9d46486 100644 --- a/drivers/gpu/drm/i915/display/intel_dvo.c +++ b/drivers/gpu/drm/i915/display/intel_dvo.c @@ -217,11 +217,17 @@ intel_dvo_mode_valid(struct drm_connector *_connector, struct drm_display_mode *mode) { struct intel_connector *connector = to_intel_connector(_connector); + struct drm_i915_private *i915 = to_i915(connector->base.dev); struct intel_dvo *intel_dvo = intel_attached_dvo(connector); const struct drm_display_mode *fixed_mode = intel_panel_fixed_mode(connector, mode); int max_dotclk = to_i915(connector->base.dev)->max_dotclk_freq; int target_clock = mode->clock; + enum drm_mode_status status; + + status = intel_cpu_transcoder_mode_valid(i915, mode); + if (status != MODE_OK) + return status; if (mode->flags & DRM_MODE_FLAG_DBLSCAN) return MODE_NO_DBLESCAN; diff --git a/drivers/gpu/drm/i915/display/intel_hdmi.c b/drivers/gpu/drm/i915/display/intel_hdmi.c index ac315f8e7820..bfa456fa7d25 100644 --- a/drivers/gpu/drm/i915/display/intel_hdmi.c +++ b/drivers/gpu/drm/i915/display/intel_hdmi.c @@ -1983,6 +1983,10 @@ intel_hdmi_mode_valid(struct drm_connector *connector, bool ycbcr_420_only; enum intel_output_format sink_format; + status = intel_cpu_transcoder_mode_valid(dev_priv, mode); + if (status != MODE_OK) + return status; + if ((mode->flags & DRM_MODE_FLAG_3D_MASK) == DRM_MODE_FLAG_3D_FRAME_PACKING) clock *= 2; diff --git a/drivers/gpu/drm/i915/display/intel_lvds.c b/drivers/gpu/drm/i915/display/intel_lvds.c index 2a4ca7e65775..bcbdd1984fd9 100644 --- a/drivers/gpu/drm/i915/display/intel_lvds.c +++ b/drivers/gpu/drm/i915/display/intel_lvds.c @@ -389,11 +389,16 @@ intel_lvds_mode_valid(struct drm_connector *_connector, struct drm_display_mode *mode) { struct intel_connector *connector = to_intel_connector(_connector); + struct drm_i915_private *i915 = to_i915(connector->base.dev); const struct drm_display_mode *fixed_mode = intel_panel_fixed_mode(connector, mode); int max_pixclk = to_i915(connector->base.dev)->max_dotclk_freq; enum drm_mode_status status; + status = intel_cpu_transcoder_mode_valid(i915, mode); + if (status != MODE_OK) + return status; + if (mode->flags & DRM_MODE_FLAG_DBLSCAN) return MODE_NO_DBLESCAN; diff --git a/drivers/gpu/drm/i915/display/intel_sdvo.c b/drivers/gpu/drm/i915/display/intel_sdvo.c index a636f42ceae5..a9ac7d45d1f3 100644 --- a/drivers/gpu/drm/i915/display/intel_sdvo.c +++ b/drivers/gpu/drm/i915/display/intel_sdvo.c @@ -1921,13 +1921,19 @@ static enum drm_mode_status intel_sdvo_mode_valid(struct drm_connector *connector, struct drm_display_mode *mode) { + struct drm_i915_private *i915 = to_i915(connector->dev); struct intel_sdvo *intel_sdvo = intel_attached_sdvo(to_intel_connector(connector)); struct intel_sdvo_connector *intel_sdvo_connector = to_intel_sdvo_connector(connector); - int max_dotclk = to_i915(connector->dev)->max_dotclk_freq; bool has_hdmi_sink = intel_has_hdmi_sink(intel_sdvo_connector, connector->state); + int max_dotclk = i915->max_dotclk_freq; + enum drm_mode_status status; int clock = mode->clock; + status = intel_cpu_transcoder_mode_valid(i915, mode); + if (status != MODE_OK) + return status; + if (mode->flags & DRM_MODE_FLAG_DBLSCAN) return MODE_NO_DBLESCAN; diff --git a/drivers/gpu/drm/i915/display/intel_tv.c b/drivers/gpu/drm/i915/display/intel_tv.c index 31a79fdfc812..2ee4f0d95851 100644 --- a/drivers/gpu/drm/i915/display/intel_tv.c +++ b/drivers/gpu/drm/i915/display/intel_tv.c @@ -958,8 +958,14 @@ static enum drm_mode_status intel_tv_mode_valid(struct drm_connector *connector, struct drm_display_mode *mode) { + struct drm_i915_private *i915 = to_i915(connector->dev); const struct tv_mode *tv_mode = intel_tv_mode_find(connector->state); - int max_dotclk = to_i915(connector->dev)->max_dotclk_freq; + int max_dotclk = i915->max_dotclk_freq; + enum drm_mode_status status; + + status = intel_cpu_transcoder_mode_valid(i915, mode); + if (status != MODE_OK) + return status; if (mode->flags & DRM_MODE_FLAG_DBLSCAN) return MODE_NO_DBLESCAN; diff --git a/drivers/gpu/drm/i915/display/vlv_dsi.c b/drivers/gpu/drm/i915/display/vlv_dsi.c index 55da627a8b8d..f488394d3108 100644 --- a/drivers/gpu/drm/i915/display/vlv_dsi.c +++ b/drivers/gpu/drm/i915/display/vlv_dsi.c @@ -1541,9 +1541,25 @@ static const struct drm_encoder_funcs intel_dsi_funcs = { .destroy = intel_dsi_encoder_destroy, }; +static enum drm_mode_status vlv_dsi_mode_valid(struct drm_connector *connector, + struct drm_display_mode *mode) +{ + struct drm_i915_private *i915 = to_i915(connector->dev); + + if (IS_VALLEYVIEW(i915) || IS_CHERRYVIEW(i915)) { + enum drm_mode_status status; + + status = intel_cpu_transcoder_mode_valid(i915, mode); + if (status != MODE_OK) + return status; + } + + return intel_dsi_mode_valid(connector, mode); +} + static const struct drm_connector_helper_funcs intel_dsi_connector_helper_funcs = { .get_modes = intel_dsi_get_modes, - .mode_valid = intel_dsi_mode_valid, + .mode_valid = vlv_dsi_mode_valid, .atomic_check = intel_digital_connector_atomic_check, }; -- cgit v1.2.3 From 7cf82b25dd91d7f330d9df2de868caca14289ba1 Mon Sep 17 00:00:00 2001 From: Ville Syrjälä Date: Mon, 27 Nov 2023 16:50:26 +0200 Subject: drm/i915/mst: Fix .mode_valid_ctx() return values MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit .mode_valid_ctx() returns an errno, not the mode status. Fix the code to do the right thing. Cc: stable@vger.kernel.org Cc: Stanislav Lisovskiy Fixes: d51f25eb479a ("drm/i915: Add DSC support to MST path") Signed-off-by: Ville Syrjälä Link: https://patchwork.freedesktop.org/patch/msgid/20231127145028.4899-2-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula (cherry picked from commit c1799032d2ef6616113b733428dfaa2199a5604b) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/display/intel_dp_mst.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/i915/display/intel_dp_mst.c b/drivers/gpu/drm/i915/display/intel_dp_mst.c index 4816e4e77f83..1bf21bd9a26b 100644 --- a/drivers/gpu/drm/i915/display/intel_dp_mst.c +++ b/drivers/gpu/drm/i915/display/intel_dp_mst.c @@ -1031,11 +1031,15 @@ intel_dp_mst_mode_valid_ctx(struct drm_connector *connector, * Big joiner configuration needs DSC for TGL which is not true for * XE_LPD where uncompressed joiner is supported. */ - if (DISPLAY_VER(dev_priv) < 13 && bigjoiner && !dsc) - return MODE_CLOCK_HIGH; + if (DISPLAY_VER(dev_priv) < 13 && bigjoiner && !dsc) { + *status = MODE_CLOCK_HIGH; + return 0; + } - if (mode_rate > max_rate && !dsc) - return MODE_CLOCK_HIGH; + if (mode_rate > max_rate && !dsc) { + *status = MODE_CLOCK_HIGH; + return 0; + } *status = intel_mode_valid_max_plane_size(dev_priv, mode, false); return 0; -- cgit v1.2.3 From dd7eb65c493615fda7d459501c3d4a46e00ea5ba Mon Sep 17 00:00:00 2001 From: Ville Syrjälä Date: Mon, 27 Nov 2023 16:50:27 +0200 Subject: drm/i915/mst: Reject modes that require the bigjoiner MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit We have no bigjoiner support in the MST code, so .mode_valid() pretending otherwise is just going to result black screens for users. Reject any mode that needs the joiner. Cc: stable@vger.kernel.org Cc: Stanislav Lisovskiy Fixes: d51f25eb479a ("drm/i915: Add DSC support to MST path") Signed-off-by: Ville Syrjälä Link: https://patchwork.freedesktop.org/patch/msgid/20231127145028.4899-3-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula (cherry picked from commit 9c058492b16f90bb772cb0dad567e8acc68e155d) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/display/intel_dp_mst.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/gpu/drm/i915/display/intel_dp_mst.c b/drivers/gpu/drm/i915/display/intel_dp_mst.c index 1bf21bd9a26b..aa1061262613 100644 --- a/drivers/gpu/drm/i915/display/intel_dp_mst.c +++ b/drivers/gpu/drm/i915/display/intel_dp_mst.c @@ -997,6 +997,10 @@ intel_dp_mst_mode_valid_ctx(struct drm_connector *connector, if (intel_dp_need_bigjoiner(intel_dp, mode->hdisplay, target_clock)) { bigjoiner = true; max_dotclk *= 2; + + /* TODO: add support for bigjoiner */ + *status = MODE_CLOCK_HIGH; + return 0; } if (DISPLAY_VER(dev_priv) >= 10 && -- cgit v1.2.3 From 9f269070abe9c45dc60abc84e29326f855317eac Mon Sep 17 00:00:00 2001 From: heminhong Date: Tue, 14 Nov 2023 10:43:41 +0800 Subject: drm/i915: correct the input parameter on _intel_dsb_commit() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Current, the dewake_scanline variable is defined as unsigned int, an unsigned int variable that is always greater than or equal to 0. when _intel_dsb_commit function is called by intel_dsb_commit function, the dewake_scanline variable may have an int value. So the dewake_scanline variable is necessary to defined as an int. Fixes: f83b94d23770 ("drm/i915/dsb: Use DEwake to combat PkgC latency") Reported-by: kernel test robot Closes: https://lore.kernel.org/oe-kbuild-all/202310052201.AnVbpgPr-lkp@intel.com/ Cc: Ville Syrjälä Cc: Uma Shankar Signed-off-by: heminhong Reviewed-by: Jani Nikula Signed-off-by: Jani Nikula Link: https://patchwork.freedesktop.org/patch/msgid/20231114024341.14524-1-heminhong@kylinos.cn (cherry picked from commit ef32c3cc9c62252986f09e06b4e525742cd91529) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/display/intel_dsb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/display/intel_dsb.c b/drivers/gpu/drm/i915/display/intel_dsb.c index 78b6fe24dcd8..7fd6280c54a7 100644 --- a/drivers/gpu/drm/i915/display/intel_dsb.c +++ b/drivers/gpu/drm/i915/display/intel_dsb.c @@ -340,7 +340,7 @@ static int intel_dsb_dewake_scanline(const struct intel_crtc_state *crtc_state) } static void _intel_dsb_commit(struct intel_dsb *dsb, u32 ctrl, - unsigned int dewake_scanline) + int dewake_scanline) { struct intel_crtc *crtc = dsb->crtc; struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); -- cgit v1.2.3 From d951f8f5f23a9417b7952f22b33784c73caa1ebb Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Sun, 5 Nov 2023 10:32:19 -0300 Subject: ARM: dts: imx6ul-pico: Describe the Ethernet PHY clock Since commit c7e73b5051d6 ("ARM: imx: mach-imx6ul: remove 14x14 EVK specific PHY fixup")thet Ethernet PHY is no longer configured via code in board file. This caused Ethernet to stop working. Fix this problem by describing the clocks and clock-names to the Ethernet PHY node so that the KSZ8081 chip can be clocked correctly. Fixes: c7e73b5051d6 ("ARM: imx: mach-imx6ul: remove 14x14 EVK specific PHY fixup") Signed-off-by: Fabio Estevam Reviewed-by: Andrew Lunn Signed-off-by: Shawn Guo --- arch/arm/boot/dts/nxp/imx/imx6ul-pico.dtsi | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-pico.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-pico.dtsi index 4ffe99ed55ca..07dcecbe485d 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6ul-pico.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6ul-pico.dtsi @@ -121,6 +121,8 @@ max-speed = <100>; interrupt-parent = <&gpio5>; interrupts = <6 IRQ_TYPE_LEVEL_LOW>; + clocks = <&clks IMX6UL_CLK_ENET_REF>; + clock-names = "rmii-ref"; }; }; }; -- cgit v1.2.3 From 4c6f19ab2aed2abc78d788d5418047e5f44b1921 Mon Sep 17 00:00:00 2001 From: Alexander Stein Date: Mon, 6 Nov 2023 16:13:24 +0100 Subject: dt-bindings: pwm: imx-pwm: Unify #pwm-cells for all compatibles MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Use #pwm-cells for all i.MX variants. Only fsl,imx1-pwm does not support inverted PWM output. Keep it the same for consistency. Signed-off-by: Alexander Stein Reviewed-by: Uwe Kleine-König Acked-by: Conor Dooley Signed-off-by: Shawn Guo --- Documentation/devicetree/bindings/pwm/imx-pwm.yaml | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-) diff --git a/Documentation/devicetree/bindings/pwm/imx-pwm.yaml b/Documentation/devicetree/bindings/pwm/imx-pwm.yaml index c01dff3b7f84..a84a240a61dc 100644 --- a/Documentation/devicetree/bindings/pwm/imx-pwm.yaml +++ b/Documentation/devicetree/bindings/pwm/imx-pwm.yaml @@ -14,12 +14,10 @@ allOf: properties: "#pwm-cells": - description: | - Should be 2 for i.MX1 and 3 for i.MX27 and newer SoCs. See pwm.yaml - in this directory for a description of the cells format. - enum: - - 2 - - 3 + description: + The only third cell flag supported by this binding is + PWM_POLARITY_INVERTED. fsl,imx1-pwm does not support this flags. + const: 3 compatible: oneOf: -- cgit v1.2.3 From e4d008d49a7135214e0ee70537405b6a069e3a3f Mon Sep 17 00:00:00 2001 From: Yewon Choi Date: Fri, 1 Dec 2023 15:10:52 +0900 Subject: xsk: Skip polling event check for unbound socket In xsk_poll(), checking available events and setting mask bits should be executed only when a socket has been bound. Setting mask bits for unbound socket is meaningless. Currently, it checks events even when xsk_check_common() failed. To prevent this, we move goto location (skip_tx) after that checking. Fixes: 1596dae2f17e ("xsk: check IFF_UP earlier in Tx path") Signed-off-by: Yewon Choi Signed-off-by: Daniel Borkmann Acked-by: Magnus Karlsson Link: https://lore.kernel.org/bpf/20231201061048.GA1510@libra05 --- net/xdp/xsk.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/net/xdp/xsk.c b/net/xdp/xsk.c index ae9f8cb611f6..3da0b52f308d 100644 --- a/net/xdp/xsk.c +++ b/net/xdp/xsk.c @@ -947,7 +947,7 @@ static __poll_t xsk_poll(struct file *file, struct socket *sock, rcu_read_lock(); if (xsk_check_common(xs)) - goto skip_tx; + goto out; pool = xs->pool; @@ -959,12 +959,11 @@ static __poll_t xsk_poll(struct file *file, struct socket *sock, xsk_generic_xmit(sk); } -skip_tx: if (xs->rx && !xskq_prod_is_empty(xs->rx)) mask |= EPOLLIN | EPOLLRDNORM; if (xs->tx && xsk_tx_writeable(xs)) mask |= EPOLLOUT | EPOLLWRNORM; - +out: rcu_read_unlock(); return mask; } -- cgit v1.2.3 From e53f7b54b1fdecae897f25002ff0cff04faab228 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Tue, 5 Dec 2023 15:37:17 +0300 Subject: io_uring/kbuf: Fix an NULL vs IS_ERR() bug in io_alloc_pbuf_ring() The io_mem_alloc() function returns error pointers, not NULL. Update the check accordingly. Fixes: b10b73c102a2 ("io_uring/kbuf: recycle freed mapped buffer ring entries") Signed-off-by: Dan Carpenter Link: https://lore.kernel.org/r/5ed268d3-a997-4f64-bd71-47faa92101ab@moroto.mountain Signed-off-by: Jens Axboe --- io_uring/kbuf.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/io_uring/kbuf.c b/io_uring/kbuf.c index 268788305b61..bd25bc2deeaf 100644 --- a/io_uring/kbuf.c +++ b/io_uring/kbuf.c @@ -636,8 +636,8 @@ static int io_alloc_pbuf_ring(struct io_ring_ctx *ctx, ibf = io_lookup_buf_free_entry(ctx, ring_size); if (!ibf) { ptr = io_mem_alloc(ring_size); - if (!ptr) - return -ENOMEM; + if (IS_ERR(ptr)) + return PTR_ERR(ptr); /* Allocate and store deferred free entry */ ibf = kmalloc(sizeof(*ibf), GFP_KERNEL_ACCOUNT); -- cgit v1.2.3 From 9865346b7e8374b57f1c3ccacdc77846c6352ff4 Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Tue, 5 Dec 2023 07:02:13 -0700 Subject: io_uring/kbuf: check for buffer list readiness after NULL check Move the buffer list 'is_ready' check below the validity check for the buffer list for a given group. Fixes: 5cf4f52e6d8a ("io_uring: free io_buffer_list entries via RCU") Reported-by: Dan Carpenter Signed-off-by: Jens Axboe --- io_uring/kbuf.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/io_uring/kbuf.c b/io_uring/kbuf.c index bd25bc2deeaf..72b6af1d2ed3 100644 --- a/io_uring/kbuf.c +++ b/io_uring/kbuf.c @@ -756,6 +756,8 @@ void *io_pbuf_get_address(struct io_ring_ctx *ctx, unsigned long bgid) bl = __io_buffer_get_list(ctx, smp_load_acquire(&ctx->io_bl), bgid); + if (!bl || !bl->is_mmap) + return NULL; /* * Ensure the list is fully setup. Only strictly needed for RCU lookup * via mmap, and in that case only for the array indexed groups. For @@ -763,8 +765,6 @@ void *io_pbuf_get_address(struct io_ring_ctx *ctx, unsigned long bgid) */ if (!smp_load_acquire(&bl->is_ready)) return NULL; - if (!bl || !bl->is_mmap) - return NULL; return bl->buf_ring; } -- cgit v1.2.3 From 3c91c909f13f0c32b0d54d75c3f798479b1a84f5 Mon Sep 17 00:00:00 2001 From: Zhipeng Lu Date: Sat, 2 Dec 2023 17:59:02 +0800 Subject: octeontx2-af: fix a use-after-free in rvu_npa_register_reporters The rvu_dl will be freed in rvu_npa_health_reporters_destroy(rvu_dl) after the create_workqueue fails, and after that free, the rvu_dl will be translate back through rvu_npa_health_reporters_create, rvu_health_reporters_create, and rvu_register_dl. Finally it goes to the err_dl_health label, being freed again in rvu_health_reporters_destroy(rvu) by rvu_npa_health_reporters_destroy. In the second calls of rvu_npa_health_reporters_destroy, however, it uses rvu_dl->rvu_npa_health_reporter, which is already freed at the end of rvu_npa_health_reporters_destroy in the first call. So this patch prevents the first destroy by instantly returning -ENONMEN when create_workqueue fails. In addition, since the failure of create_workqueue is the only entrence of label err, it has been integrated into the error-handling path of create_workqueue. Fixes: f1168d1e207c ("octeontx2-af: Add devlink health reporters for NPA") Signed-off-by: Zhipeng Lu Acked-by: Paolo Abeni Acked-by: Geethasowjanya Akula Link: https://lore.kernel.org/r/20231202095902.3264863-1-alexious@zju.edu.cn Signed-off-by: Paolo Abeni --- drivers/net/ethernet/marvell/octeontx2/af/rvu_devlink.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu_devlink.c b/drivers/net/ethernet/marvell/octeontx2/af/rvu_devlink.c index c70932625d0d..62780d8b4f9a 100644 --- a/drivers/net/ethernet/marvell/octeontx2/af/rvu_devlink.c +++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu_devlink.c @@ -1087,7 +1087,7 @@ static int rvu_npa_register_reporters(struct rvu_devlink *rvu_dl) rvu_dl->devlink_wq = create_workqueue("rvu_devlink_wq"); if (!rvu_dl->devlink_wq) - goto err; + return -ENOMEM; INIT_WORK(&rvu_reporters->intr_work, rvu_npa_intr_work); INIT_WORK(&rvu_reporters->err_work, rvu_npa_err_work); @@ -1095,9 +1095,6 @@ static int rvu_npa_register_reporters(struct rvu_devlink *rvu_dl) INIT_WORK(&rvu_reporters->ras_work, rvu_npa_ras_work); return 0; -err: - rvu_npa_health_reporters_destroy(rvu_dl); - return -ENOMEM; } static int rvu_npa_health_reporters_create(struct rvu_devlink *rvu_dl) -- cgit v1.2.3 From 55702ec9603ebeffb15e6f7b113623fe1d8872f4 Mon Sep 17 00:00:00 2001 From: Stefan Wiehler Date: Mon, 6 Nov 2023 13:12:07 +0100 Subject: mips/smp: Call rcutree_report_cpu_starting() earlier rcutree_report_cpu_starting() must be called before clockevents_register_device() to avoid the following lockdep splat triggered by calling list_add() when CONFIG_PROVE_RCU_LIST=y: WARNING: suspicious RCU usage ... ----------------------------- kernel/locking/lockdep.c:3680 RCU-list traversed in non-reader section!! other info that might help us debug this: RCU used illegally from offline CPU! rcu_scheduler_active = 1, debug_locks = 1 no locks held by swapper/1/0. ... Call Trace: [] show_stack+0x64/0x158 [] dump_stack_lvl+0x90/0xc4 [] __lock_acquire+0x1404/0x2940 [] lock_acquire+0x14c/0x448 [] _raw_spin_lock_irqsave+0x50/0x88 [] clockevents_register_device+0x60/0x1e8 [] r4k_clockevent_init+0x220/0x3a0 [] start_secondary+0x50/0x3b8 raw_smp_processor_id() is required in order to avoid calling into lockdep before RCU has declared the CPU to be watched for readers. See also commit 29368e093921 ("x86/smpboot: Move rcu_cpu_starting() earlier"), commit de5d9dae150c ("s390/smp: move rcu_cpu_starting() earlier") and commit 99f070b62322 ("powerpc/smp: Call rcu_cpu_starting() earlier"). Signed-off-by: Stefan Wiehler Reviewed-by: Huacai Chen Signed-off-by: Thomas Bogendoerfer --- arch/mips/kernel/smp.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/mips/kernel/smp.c b/arch/mips/kernel/smp.c index 8fbef537fb88..82e2e051b416 100644 --- a/arch/mips/kernel/smp.c +++ b/arch/mips/kernel/smp.c @@ -351,10 +351,11 @@ early_initcall(mips_smp_ipi_init); */ asmlinkage void start_secondary(void) { - unsigned int cpu; + unsigned int cpu = raw_smp_processor_id(); cpu_probe(); per_cpu_trap_init(false); + rcutree_report_cpu_starting(cpu); mips_clockevent_init(); mp_ops->init_secondary(); cpu_report(); @@ -366,7 +367,6 @@ asmlinkage void start_secondary(void) */ calibrate_delay(); - cpu = smp_processor_id(); cpu_data[cpu].udelay_val = loops_per_jiffy; set_cpu_sibling_map(cpu); -- cgit v1.2.3 From 8f7aa77a463f47c9e00592d02747a9fcf2271543 Mon Sep 17 00:00:00 2001 From: Jiaxun Yang Date: Tue, 7 Nov 2023 11:15:18 +0000 Subject: MIPS: Loongson64: Reserve vgabios memory on boot vgabios is passed from firmware to kernel on Loongson64 systems. Sane firmware will keep this pointer in reserved memory space passed from the firmware but insane firmware keeps it in low memory before kernel entry that is not reserved. Previously kernel won't try to allocate memory from low memory before kernel entry on boot, but after converting to memblock it will do that. Fix by resversing those memory on early boot. Cc: stable@vger.kernel.org Fixes: a94e4f24ec83 ("MIPS: init: Drop boot_mem_map") Signed-off-by: Jiaxun Yang Signed-off-by: Thomas Bogendoerfer --- arch/mips/loongson64/init.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/arch/mips/loongson64/init.c b/arch/mips/loongson64/init.c index ee8de1735b7c..d62262f93069 100644 --- a/arch/mips/loongson64/init.c +++ b/arch/mips/loongson64/init.c @@ -88,6 +88,11 @@ void __init szmem(unsigned int node) break; } } + + /* Reserve vgabios if it comes from firmware */ + if (loongson_sysconf.vgabios_addr) + memblock_reserve(virt_to_phys((void *)loongson_sysconf.vgabios_addr), + SZ_256K); } #ifndef CONFIG_NUMA -- cgit v1.2.3 From edc0378eee00200a5bedf1bb9f00ad390e0d1bd4 Mon Sep 17 00:00:00 2001 From: Jiaxun Yang Date: Tue, 7 Nov 2023 11:15:19 +0000 Subject: MIPS: Loongson64: Enable DMA noncoherent support There are some Loongson64 systems come with broken coherent DMA support, firmware will set a bit in boot_param and pass nocoherentio in cmdline. However nonconherent support was missed out when spin off Loongson-2EF form Loongson64, and that boot_param change never made itself into upstream. Support DMA noncoherent properly to get those systems working. Cc: stable@vger.kernel.org Fixes: 71e2f4dd5a65 ("MIPS: Fork loongson2ef from loongson64") Signed-off-by: Jiaxun Yang Signed-off-by: Thomas Bogendoerfer --- arch/mips/Kconfig | 2 ++ arch/mips/include/asm/mach-loongson64/boot_param.h | 3 ++- arch/mips/loongson64/env.c | 10 +++++++++- 3 files changed, 13 insertions(+), 2 deletions(-) diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 76db82542519..797ae590ebdb 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -460,6 +460,7 @@ config MACH_LOONGSON2EF config MACH_LOONGSON64 bool "Loongson 64-bit family of machines" + select ARCH_DMA_DEFAULT_COHERENT select ARCH_SPARSEMEM_ENABLE select ARCH_MIGHT_HAVE_PC_PARPORT select ARCH_MIGHT_HAVE_PC_SERIO @@ -1251,6 +1252,7 @@ config CPU_LOONGSON64 select CPU_SUPPORTS_MSA select CPU_DIEI_BROKEN if !LOONGSON3_ENHANCEMENT select CPU_MIPSR2_IRQ_VI + select DMA_NONCOHERENT select WEAK_ORDERING select WEAK_REORDERING_BEYOND_LLSC select MIPS_ASID_BITS_VARIABLE diff --git a/arch/mips/include/asm/mach-loongson64/boot_param.h b/arch/mips/include/asm/mach-loongson64/boot_param.h index 035b1a69e2d0..c454ef734c45 100644 --- a/arch/mips/include/asm/mach-loongson64/boot_param.h +++ b/arch/mips/include/asm/mach-loongson64/boot_param.h @@ -117,7 +117,8 @@ struct irq_source_routing_table { u64 pci_io_start_addr; u64 pci_io_end_addr; u64 pci_config_addr; - u32 dma_mask_bits; + u16 dma_mask_bits; + u16 dma_noncoherent; } __packed; struct interface_info { diff --git a/arch/mips/loongson64/env.c b/arch/mips/loongson64/env.c index c961e2999f15..ef3750a6ffac 100644 --- a/arch/mips/loongson64/env.c +++ b/arch/mips/loongson64/env.c @@ -13,6 +13,8 @@ * Copyright (C) 2009 Lemote Inc. * Author: Wu Zhangjin, wuzhangjin@gmail.com */ + +#include #include #include #include @@ -147,8 +149,14 @@ void __init prom_lefi_init_env(void) loongson_sysconf.dma_mask_bits = eirq_source->dma_mask_bits; if (loongson_sysconf.dma_mask_bits < 32 || - loongson_sysconf.dma_mask_bits > 64) + loongson_sysconf.dma_mask_bits > 64) { loongson_sysconf.dma_mask_bits = 32; + dma_default_coherent = true; + } else { + dma_default_coherent = !eirq_source->dma_noncoherent; + } + + pr_info("Firmware: Coherent DMA: %s\n", dma_default_coherent ? "on" : "off"); loongson_sysconf.restart_addr = boot_p->reset_system.ResetWarm; loongson_sysconf.poweroff_addr = boot_p->reset_system.Shutdown; -- cgit v1.2.3 From c7206e7bd214ebb3ca6fa474a4423662327d9beb Mon Sep 17 00:00:00 2001 From: Jiaxun Yang Date: Tue, 7 Nov 2023 11:15:20 +0000 Subject: MIPS: Loongson64: Handle more memory types passed from firmware There are many types of revsered memory passed from firmware that should be reserved in memblock, and UMA memory passed from firmware that should be added to system memory for system to use. Also for memblock there is no need to align those space into page, which actually cause problems. Handle them properly to prevent memory corruption on some systems. Cc: stable@vger.kernel.org Signed-off-by: Jiaxun Yang Signed-off-by: Thomas Bogendoerfer --- arch/mips/include/asm/mach-loongson64/boot_param.h | 6 +++- arch/mips/loongson64/init.c | 42 +++++++++++++--------- 2 files changed, 31 insertions(+), 17 deletions(-) diff --git a/arch/mips/include/asm/mach-loongson64/boot_param.h b/arch/mips/include/asm/mach-loongson64/boot_param.h index c454ef734c45..e007edd6b60a 100644 --- a/arch/mips/include/asm/mach-loongson64/boot_param.h +++ b/arch/mips/include/asm/mach-loongson64/boot_param.h @@ -14,7 +14,11 @@ #define ADAPTER_ROM 8 #define ACPI_TABLE 9 #define SMBIOS_TABLE 10 -#define MAX_MEMORY_TYPE 11 +#define UMA_VIDEO_RAM 11 +#define VUMA_VIDEO_RAM 12 +#define MAX_MEMORY_TYPE 13 + +#define MEM_SIZE_IS_IN_BYTES (1 << 31) #define LOONGSON3_BOOT_MEM_MAP_MAX 128 struct efi_memory_map_loongson { diff --git a/arch/mips/loongson64/init.c b/arch/mips/loongson64/init.c index d62262f93069..f25caa6aa9d3 100644 --- a/arch/mips/loongson64/init.c +++ b/arch/mips/loongson64/init.c @@ -49,8 +49,7 @@ void virtual_early_config(void) void __init szmem(unsigned int node) { u32 i, mem_type; - static unsigned long num_physpages; - u64 node_id, node_psize, start_pfn, end_pfn, mem_start, mem_size; + phys_addr_t node_id, mem_start, mem_size; /* Otherwise come from DTB */ if (loongson_sysconf.fw_interface != LOONGSON_LEFI) @@ -64,27 +63,38 @@ void __init szmem(unsigned int node) mem_type = loongson_memmap->map[i].mem_type; mem_size = loongson_memmap->map[i].mem_size; - mem_start = loongson_memmap->map[i].mem_start; + + /* Memory size comes in MB if MEM_SIZE_IS_IN_BYTES not set */ + if (mem_size & MEM_SIZE_IS_IN_BYTES) + mem_size &= ~MEM_SIZE_IS_IN_BYTES; + else + mem_size = mem_size << 20; + + mem_start = (node_id << 44) | loongson_memmap->map[i].mem_start; switch (mem_type) { case SYSTEM_RAM_LOW: case SYSTEM_RAM_HIGH: - start_pfn = ((node_id << 44) + mem_start) >> PAGE_SHIFT; - node_psize = (mem_size << 20) >> PAGE_SHIFT; - end_pfn = start_pfn + node_psize; - num_physpages += node_psize; - pr_info("Node%d: mem_type:%d, mem_start:0x%llx, mem_size:0x%llx MB\n", - (u32)node_id, mem_type, mem_start, mem_size); - pr_info(" start_pfn:0x%llx, end_pfn:0x%llx, num_physpages:0x%lx\n", - start_pfn, end_pfn, num_physpages); - memblock_add_node(PFN_PHYS(start_pfn), - PFN_PHYS(node_psize), node, + case UMA_VIDEO_RAM: + pr_info("Node %d, mem_type:%d\t[%pa], %pa bytes usable\n", + (u32)node_id, mem_type, &mem_start, &mem_size); + memblock_add_node(mem_start, mem_size, node, MEMBLOCK_NONE); break; case SYSTEM_RAM_RESERVED: - pr_info("Node%d: mem_type:%d, mem_start:0x%llx, mem_size:0x%llx MB\n", - (u32)node_id, mem_type, mem_start, mem_size); - memblock_reserve(((node_id << 44) + mem_start), mem_size << 20); + case VIDEO_ROM: + case ADAPTER_ROM: + case ACPI_TABLE: + case SMBIOS_TABLE: + pr_info("Node %d, mem_type:%d\t[%pa], %pa bytes reserved\n", + (u32)node_id, mem_type, &mem_start, &mem_size); + memblock_reserve(mem_start, mem_size); + break; + /* We should not reserve VUMA_VIDEO_RAM as it overlaps with MMIO */ + case VUMA_VIDEO_RAM: + default: + pr_info("Node %d, mem_type:%d\t[%pa], %pa bytes unhandled\n", + (u32)node_id, mem_type, &mem_start, &mem_size); break; } } -- cgit v1.2.3 From a58a173444a68412bb08849bd81c679395f20ca0 Mon Sep 17 00:00:00 2001 From: Thomas Bogendoerfer Date: Thu, 30 Nov 2023 17:36:01 +0100 Subject: MIPS: kernel: Clear FPU states when setting up kernel threads io_uring sets up the io worker kernel thread via a syscall out of an user space prrocess. This process might have used FPU and since copy_thread() didn't clear FPU states for kernel threads a BUG() is triggered for using FPU inside kernel. Move code around to always clear FPU state for user and kernel threads. Cc: stable@vger.kernel.org Reported-by: Aurelien Jarno Closes: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1055021 Suggested-by: Jiaxun Yang Reviewed-by: Jiaxun Yang Signed-off-by: Thomas Bogendoerfer --- arch/mips/kernel/process.c | 25 +++++++++++++------------ 1 file changed, 13 insertions(+), 12 deletions(-) diff --git a/arch/mips/kernel/process.c b/arch/mips/kernel/process.c index 5387ed0a5186..b630604c577f 100644 --- a/arch/mips/kernel/process.c +++ b/arch/mips/kernel/process.c @@ -121,6 +121,19 @@ int copy_thread(struct task_struct *p, const struct kernel_clone_args *args) /* Put the stack after the struct pt_regs. */ childksp = (unsigned long) childregs; p->thread.cp0_status = (read_c0_status() & ~(ST0_CU2|ST0_CU1)) | ST0_KERNEL_CUMASK; + + /* + * New tasks lose permission to use the fpu. This accelerates context + * switching for most programs since they don't use the fpu. + */ + clear_tsk_thread_flag(p, TIF_USEDFPU); + clear_tsk_thread_flag(p, TIF_USEDMSA); + clear_tsk_thread_flag(p, TIF_MSA_CTX_LIVE); + +#ifdef CONFIG_MIPS_MT_FPAFF + clear_tsk_thread_flag(p, TIF_FPUBOUND); +#endif /* CONFIG_MIPS_MT_FPAFF */ + if (unlikely(args->fn)) { /* kernel thread */ unsigned long status = p->thread.cp0_status; @@ -149,20 +162,8 @@ int copy_thread(struct task_struct *p, const struct kernel_clone_args *args) p->thread.reg29 = (unsigned long) childregs; p->thread.reg31 = (unsigned long) ret_from_fork; - /* - * New tasks lose permission to use the fpu. This accelerates context - * switching for most programs since they don't use the fpu. - */ childregs->cp0_status &= ~(ST0_CU2|ST0_CU1); - clear_tsk_thread_flag(p, TIF_USEDFPU); - clear_tsk_thread_flag(p, TIF_USEDMSA); - clear_tsk_thread_flag(p, TIF_MSA_CTX_LIVE); - -#ifdef CONFIG_MIPS_MT_FPAFF - clear_tsk_thread_flag(p, TIF_FPUBOUND); -#endif /* CONFIG_MIPS_MT_FPAFF */ - #ifdef CONFIG_MIPS_FP_SUPPORT atomic_set(&p->thread.bd_emu_frame, BD_EMUFRAME_NONE); #endif -- cgit v1.2.3 From e2b005d6ec0e738df584190e21d2c7ada37266a0 Mon Sep 17 00:00:00 2001 From: Ian Rogers Date: Mon, 4 Dec 2023 10:23:29 -0800 Subject: perf metrics: Avoid segv if default metricgroup isn't set A metric is default by having "Default" within its groups. The default metricgroup name needn't be set and this can result in segv in default_metricgroup_cmp and perf_stat__print_shadow_stats_metricgroup that assume it has a value when there is a Default metric group. To avoid the segv initialize the value to "". Fixes: 1c0e47956a8e ("perf metrics: Sort the Default metricgroup") Signed-off-by: Ian Rogers Reviewed-and-tested-by: Ilkka Koskinen Cc: James Clark Cc: Will Deacon Cc: Leo Yan Cc: Mike Leach Cc: Kajol Jain Cc: Kan Liang Cc: John Garry Cc: stable@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Link: https://lore.kernel.org/r/20231204182330.654255-1-irogers@google.com Signed-off-by: Namhyung Kim --- tools/perf/util/metricgroup.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/perf/util/metricgroup.c b/tools/perf/util/metricgroup.c index 0484736d9fe4..ca3e0404f187 100644 --- a/tools/perf/util/metricgroup.c +++ b/tools/perf/util/metricgroup.c @@ -225,7 +225,7 @@ static struct metric *metric__new(const struct pmu_metric *pm, m->pmu = pm->pmu ?: "cpu"; m->metric_name = pm->metric_name; - m->default_metricgroup_name = pm->default_metricgroup_name; + m->default_metricgroup_name = pm->default_metricgroup_name ?: ""; m->modifier = NULL; if (modifier) { m->modifier = strdup(modifier); -- cgit v1.2.3 From 90fe70d4e23cb57253d2668a171d5695c332deb7 Mon Sep 17 00:00:00 2001 From: Ilkka Koskinen Date: Thu, 30 Nov 2023 18:15:48 -0800 Subject: perf vendor events arm64: AmpereOne: Add missing DefaultMetricgroupName fields AmpereOne metrics were missing DefaultMetricgroupName from metrics with "Default" in group name resulting perf to segfault. Add the missing field to address the issue. Fixes: 59faeaf80d02 ("perf vendor events arm64: Fix for AmpereOne metrics") Signed-off-by: Ilkka Koskinen Reviewed-by: Ian Rogers Cc: James Clark Cc: Will Deacon Cc: Leo Yan Cc: Mike Leach Cc: John Garry Cc: linux-arm-kernel@lists.infradead.org Link: https://lore.kernel.org/r/20231201021550.1109196-2-ilkka@os.amperecomputing.com Signed-off-by: Namhyung Kim --- tools/perf/pmu-events/arch/arm64/ampere/ampereone/metrics.json | 2 ++ 1 file changed, 2 insertions(+) diff --git a/tools/perf/pmu-events/arch/arm64/ampere/ampereone/metrics.json b/tools/perf/pmu-events/arch/arm64/ampere/ampereone/metrics.json index e2848a9d4848..afcdad58ef89 100644 --- a/tools/perf/pmu-events/arch/arm64/ampere/ampereone/metrics.json +++ b/tools/perf/pmu-events/arch/arm64/ampere/ampereone/metrics.json @@ -231,6 +231,7 @@ "MetricName": "slots_lost_misspeculation_fraction", "MetricExpr": "100 * ((OP_SPEC - OP_RETIRED) / (CPU_CYCLES * #slots))", "BriefDescription": "Fraction of slots lost due to misspeculation", + "DefaultMetricgroupName": "TopdownL1", "MetricGroup": "Default;TopdownL1", "ScaleUnit": "1percent of slots" }, @@ -238,6 +239,7 @@ "MetricName": "retired_fraction", "MetricExpr": "100 * (OP_RETIRED / (CPU_CYCLES * #slots))", "BriefDescription": "Fraction of slots retiring, useful work", + "DefaultMetricgroupName": "TopdownL1", "MetricGroup": "Default;TopdownL1", "ScaleUnit": "1percent of slots" }, -- cgit v1.2.3 From f8e9889f54da6e3146c2cb3f5c206cf1a704f9d3 Mon Sep 17 00:00:00 2001 From: Michal Swiatkowski Date: Tue, 24 Oct 2023 16:20:10 +0200 Subject: ice: change vfs.num_msix_per to vf->num_msix vfs::num_msix_per should be only used as default value for vf->num_msix. For other use cases vf->num_msix should be used, as VF can have different MSI-X amount values. Fix incorrect register index calculation. vfs::num_msix_per and pf->sriov_base_vector shouldn't be used after implementation of changing MSI-X amount on VFs. Instead vf->first_vector_idx should be used, as it is storing value for first irq index. Fixes: fe1c5ca2fe76 ("ice: implement num_msix field per VF") Reviewed-by: Jacob Keller Signed-off-by: Michal Swiatkowski Reviewed-by: Simon Horman Tested-by: Rafal Romanowski Signed-off-by: Tony Nguyen --- drivers/net/ethernet/intel/ice/ice_sriov.c | 7 +------ drivers/net/ethernet/intel/ice/ice_virtchnl.c | 5 ++--- 2 files changed, 3 insertions(+), 9 deletions(-) diff --git a/drivers/net/ethernet/intel/ice/ice_sriov.c b/drivers/net/ethernet/intel/ice/ice_sriov.c index 2a5e6616cc0a..e1494f24f661 100644 --- a/drivers/net/ethernet/intel/ice/ice_sriov.c +++ b/drivers/net/ethernet/intel/ice/ice_sriov.c @@ -374,16 +374,11 @@ static void ice_ena_vf_mappings(struct ice_vf *vf) */ int ice_calc_vf_reg_idx(struct ice_vf *vf, struct ice_q_vector *q_vector) { - struct ice_pf *pf; - if (!vf || !q_vector) return -EINVAL; - pf = vf->pf; - /* always add one to account for the OICR being the first MSIX */ - return pf->sriov_base_vector + pf->vfs.num_msix_per * vf->vf_id + - q_vector->v_idx + 1; + return vf->first_vector_idx + q_vector->v_idx + 1; } /** diff --git a/drivers/net/ethernet/intel/ice/ice_virtchnl.c b/drivers/net/ethernet/intel/ice/ice_virtchnl.c index de11b3186bd7..1c7b4ded948b 100644 --- a/drivers/net/ethernet/intel/ice/ice_virtchnl.c +++ b/drivers/net/ethernet/intel/ice/ice_virtchnl.c @@ -1523,7 +1523,6 @@ static int ice_vc_cfg_irq_map_msg(struct ice_vf *vf, u8 *msg) u16 num_q_vectors_mapped, vsi_id, vector_id; struct virtchnl_irq_map_info *irqmap_info; struct virtchnl_vector_map *map; - struct ice_pf *pf = vf->pf; struct ice_vsi *vsi; int i; @@ -1535,7 +1534,7 @@ static int ice_vc_cfg_irq_map_msg(struct ice_vf *vf, u8 *msg) * there is actually at least a single VF queue vector mapped */ if (!test_bit(ICE_VF_STATE_ACTIVE, vf->vf_states) || - pf->vfs.num_msix_per < num_q_vectors_mapped || + vf->num_msix < num_q_vectors_mapped || !num_q_vectors_mapped) { v_ret = VIRTCHNL_STATUS_ERR_PARAM; goto error_param; @@ -1557,7 +1556,7 @@ static int ice_vc_cfg_irq_map_msg(struct ice_vf *vf, u8 *msg) /* vector_id is always 0-based for each VF, and can never be * larger than or equal to the max allowed interrupts per VF */ - if (!(vector_id < pf->vfs.num_msix_per) || + if (!(vector_id < vf->num_msix) || !ice_vc_isvalid_vsi_id(vf, vsi_id) || (!vector_id && (map->rxq_map || map->txq_map))) { v_ret = VIRTCHNL_STATUS_ERR_PARAM; -- cgit v1.2.3 From 4e7f0087b058cc3cab8f3c32141b51aa5457d298 Mon Sep 17 00:00:00 2001 From: Marcin Szycik Date: Tue, 7 Nov 2023 14:51:38 +0100 Subject: ice: Restore fix disabling RX VLAN filtering Fix setting dis_rx_filtering depending on whether port vlan is being turned on or off. This was originally fixed in commit c793f8ea15e3 ("ice: Fix disabling Rx VLAN filtering with port VLAN enabled"), but while refactoring ice_vf_vsi_init_vlan_ops(), the fix has been lost. Restore the fix along with the original comment from that change. Also delete duplicate lines in ice_port_vlan_on(). Fixes: 2946204b3fa8 ("ice: implement bridge port vlan") Reviewed-by: Wojciech Drewek Signed-off-by: Marcin Szycik Reviewed-by: Simon Horman Tested-by: Rafal Romanowski Signed-off-by: Tony Nguyen --- drivers/net/ethernet/intel/ice/ice_vf_vsi_vlan_ops.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) diff --git a/drivers/net/ethernet/intel/ice/ice_vf_vsi_vlan_ops.c b/drivers/net/ethernet/intel/ice/ice_vf_vsi_vlan_ops.c index d7b10dc67f03..80dc4bcdd3a4 100644 --- a/drivers/net/ethernet/intel/ice/ice_vf_vsi_vlan_ops.c +++ b/drivers/net/ethernet/intel/ice/ice_vf_vsi_vlan_ops.c @@ -32,7 +32,6 @@ static void ice_port_vlan_on(struct ice_vsi *vsi) /* setup outer VLAN ops */ vlan_ops->set_port_vlan = ice_vsi_set_outer_port_vlan; vlan_ops->clear_port_vlan = ice_vsi_clear_outer_port_vlan; - vlan_ops->clear_port_vlan = ice_vsi_clear_outer_port_vlan; /* setup inner VLAN ops */ vlan_ops = &vsi->inner_vlan_ops; @@ -47,8 +46,13 @@ static void ice_port_vlan_on(struct ice_vsi *vsi) vlan_ops->set_port_vlan = ice_vsi_set_inner_port_vlan; vlan_ops->clear_port_vlan = ice_vsi_clear_inner_port_vlan; - vlan_ops->clear_port_vlan = ice_vsi_clear_inner_port_vlan; } + + /* all Rx traffic should be in the domain of the assigned port VLAN, + * so prevent disabling Rx VLAN filtering + */ + vlan_ops->dis_rx_filtering = noop_vlan; + vlan_ops->ena_rx_filtering = ice_vsi_ena_rx_vlan_filtering; } @@ -77,6 +81,8 @@ static void ice_port_vlan_off(struct ice_vsi *vsi) vlan_ops->del_vlan = ice_vsi_del_vlan; } + vlan_ops->dis_rx_filtering = ice_vsi_dis_rx_vlan_filtering; + if (!test_bit(ICE_FLAG_VF_VLAN_PRUNING, pf->flags)) vlan_ops->ena_rx_filtering = noop_vlan; else @@ -141,7 +147,6 @@ void ice_vf_vsi_init_vlan_ops(struct ice_vsi *vsi) &vsi->outer_vlan_ops : &vsi->inner_vlan_ops; vlan_ops->add_vlan = ice_vsi_add_vlan; - vlan_ops->dis_rx_filtering = ice_vsi_dis_rx_vlan_filtering; vlan_ops->ena_tx_filtering = ice_vsi_ena_tx_vlan_filtering; vlan_ops->dis_tx_filtering = ice_vsi_dis_tx_vlan_filtering; } -- cgit v1.2.3 From 7d9f22b3d3ef379ed05bd3f3e2de83dfa8da8258 Mon Sep 17 00:00:00 2001 From: Ivan Vecera Date: Fri, 10 Nov 2023 09:12:09 +0100 Subject: i40e: Fix unexpected MFS warning message Commit 3a2c6ced90e1 ("i40e: Add a check to see if MFS is set") added a warning message that reports unexpected size of port's MFS (max frame size) value. This message use for the port number local variable 'i' that is wrong. In i40e_probe() this 'i' variable is used only to iterate VSIs to find FDIR VSI: ... /* if FDIR VSI was set up, start it now */ for (i = 0; i < pf->num_alloc_vsi; i++) { if (pf->vsi[i] && pf->vsi[i]->type == I40E_VSI_FDIR) { i40e_vsi_open(pf->vsi[i]); break; } } ... So the warning message use for the port number index of FDIR VSI if this exists or pf->num_alloc_vsi if not. Fix the message by using 'pf->hw.port' for the port number. Fixes: 3a2c6ced90e1 ("i40e: Add a check to see if MFS is set") Signed-off-by: Ivan Vecera Reviewed-by: Simon Horman Signed-off-by: Tony Nguyen --- drivers/net/ethernet/intel/i40e/i40e_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c index f7a332e51524..1ab8dbe2d880 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_main.c +++ b/drivers/net/ethernet/intel/i40e/i40e_main.c @@ -16224,7 +16224,7 @@ static int i40e_probe(struct pci_dev *pdev, const struct pci_device_id *ent) I40E_PRTGL_SAH_MFS_MASK) >> I40E_PRTGL_SAH_MFS_SHIFT; if (val < MAX_FRAME_SIZE_DEFAULT) dev_warn(&pdev->dev, "MFS for port %x has been set below the default: %x\n", - i, val); + pf->hw.port, val); /* Add a filter to drop all Flow control frames from any VSI from being * transmitted. By doing so we stop a malicious VF from sending out -- cgit v1.2.3 From a206d9959f5ccd0fb2d54a997c993947ae0e881c Mon Sep 17 00:00:00 2001 From: Jacob Keller Date: Mon, 27 Nov 2023 15:33:50 -0800 Subject: iavf: validate tx_coalesce_usecs even if rx_coalesce_usecs is zero In __iavf_set_coalesce, the driver checks both ec->rx_coalesce_usecs and ec->tx_coalesce_usecs for validity. It does this via a chain if if/else-if blocks. If every single branch of the series of if statements exited, this would be fine. However, the rx_coalesce_usecs is checked against zero to print an informative message if use_adaptive_rx_coalesce is enabled. If this check is true, it short circuits the entire chain of statements, preventing validation of the tx_coalesce_usecs field. Indeed, since commit e792779e6b63 ("iavf: Prevent changing static ITR values if adaptive moderation is on") the iavf driver actually rejects any change to the tx_coalesce_usecs or rx_coalesce_usecs when use_adaptive_tx_coalesce or use_adaptive_rx_coalesce is enabled, making this checking a bit redundant. Fix this error by removing the unnecessary and redundant checks for use_adaptive_rx_coalesce and use_adaptive_tx_coalesce. Since zero is a valid value, and since the tx_coalesce_usecs and rx_coalesce_usecs fields are already unsigned, remove the minimum value check. This allows assigning an ITR value ranging from 0-8160 as described by the printed message. Fixes: 65e87c0398f5 ("i40evf: support queue-specific settings for interrupt moderation") Signed-off-by: Jacob Keller Tested-by: Rafal Romanowski Signed-off-by: Tony Nguyen --- drivers/net/ethernet/intel/iavf/iavf_ethtool.c | 12 ++---------- drivers/net/ethernet/intel/iavf/iavf_txrx.h | 1 - 2 files changed, 2 insertions(+), 11 deletions(-) diff --git a/drivers/net/ethernet/intel/iavf/iavf_ethtool.c b/drivers/net/ethernet/intel/iavf/iavf_ethtool.c index 6f236d1a6444..19cbfe554689 100644 --- a/drivers/net/ethernet/intel/iavf/iavf_ethtool.c +++ b/drivers/net/ethernet/intel/iavf/iavf_ethtool.c @@ -827,18 +827,10 @@ static int __iavf_set_coalesce(struct net_device *netdev, struct iavf_adapter *adapter = netdev_priv(netdev); int i; - if (ec->rx_coalesce_usecs == 0) { - if (ec->use_adaptive_rx_coalesce) - netif_info(adapter, drv, netdev, "rx-usecs=0, need to disable adaptive-rx for a complete disable\n"); - } else if ((ec->rx_coalesce_usecs < IAVF_MIN_ITR) || - (ec->rx_coalesce_usecs > IAVF_MAX_ITR)) { + if (ec->rx_coalesce_usecs > IAVF_MAX_ITR) { netif_info(adapter, drv, netdev, "Invalid value, rx-usecs range is 0-8160\n"); return -EINVAL; - } else if (ec->tx_coalesce_usecs == 0) { - if (ec->use_adaptive_tx_coalesce) - netif_info(adapter, drv, netdev, "tx-usecs=0, need to disable adaptive-tx for a complete disable\n"); - } else if ((ec->tx_coalesce_usecs < IAVF_MIN_ITR) || - (ec->tx_coalesce_usecs > IAVF_MAX_ITR)) { + } else if (ec->tx_coalesce_usecs > IAVF_MAX_ITR) { netif_info(adapter, drv, netdev, "Invalid value, tx-usecs range is 0-8160\n"); return -EINVAL; } diff --git a/drivers/net/ethernet/intel/iavf/iavf_txrx.h b/drivers/net/ethernet/intel/iavf/iavf_txrx.h index 7e6ee32d19b6..10ba36602c0c 100644 --- a/drivers/net/ethernet/intel/iavf/iavf_txrx.h +++ b/drivers/net/ethernet/intel/iavf/iavf_txrx.h @@ -15,7 +15,6 @@ */ #define IAVF_ITR_DYNAMIC 0x8000 /* use top bit as a flag */ #define IAVF_ITR_MASK 0x1FFE /* mask for ITR register value */ -#define IAVF_MIN_ITR 2 /* reg uses 2 usec resolution */ #define IAVF_ITR_100K 10 /* all values below must be even */ #define IAVF_ITR_50K 20 #define IAVF_ITR_20K 50 -- cgit v1.2.3 From b1693747487442984050eb0f462b83a3a8307525 Mon Sep 17 00:00:00 2001 From: Ian Rogers Date: Wed, 29 Nov 2023 13:34:26 -0800 Subject: perf list: Fix JSON segfault by setting the used skip_duplicate_pmus callback Json output didn't set the skip_duplicate_pmus callback yielding a segfault. Fixes: cd4e1efbbc40 ("perf pmus: Skip duplicate PMUs and don't print list suffix by default") Signed-off-by: Ian Rogers Cc: James Clark Cc: Kan Liang Cc: Athira Rajeev Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20231129213428.2227448-2-irogers@google.com [namhyung: updated subject line according to Arnaldo] Signed-off-by: Namhyung Kim --- tools/perf/builtin-list.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/tools/perf/builtin-list.c b/tools/perf/builtin-list.c index a343823c8ddf..61c2c96cc070 100644 --- a/tools/perf/builtin-list.c +++ b/tools/perf/builtin-list.c @@ -434,6 +434,11 @@ static void json_print_metric(void *ps __maybe_unused, const char *group, strbuf_release(&buf); } +static bool json_skip_duplicate_pmus(void *ps __maybe_unused) +{ + return false; +} + static bool default_skip_duplicate_pmus(void *ps) { struct print_state *print_state = ps; @@ -503,6 +508,7 @@ int cmd_list(int argc, const char **argv) .print_end = json_print_end, .print_event = json_print_event, .print_metric = json_print_metric, + .skip_duplicate_pmus = json_skip_duplicate_pmus, }; ps = &json_ps; } else { -- cgit v1.2.3 From 24be0b3c40594a14b65141ced486ae327398faf8 Mon Sep 17 00:00:00 2001 From: Mathias Nyman Date: Tue, 5 Dec 2023 11:05:48 +0200 Subject: Revert "xhci: Loosen RPM as default policy to cover for AMD xHC 1.1" This reverts commit 4baf1218150985ee3ab0a27220456a1f027ea0ac. Enabling runtime pm as default for all AMD xHC 1.1 controllers caused regression. An initial attempt to fix those was done in commit a5d6264b638e ("xhci: Enable RPM on controllers that support low-power states") but new issues are still seen. Revert this to get those AMD xHC 1.1 systems working This patch went to stable an needs to be reverted from there as well. Fixes: 4baf12181509 ("xhci: Loosen RPM as default policy to cover for AMD xHC 1.1") Link: https://lore.kernel.org/linux-usb/55c50bf5-bffb-454e-906e-4408c591cb63@molgen.mpg.de Cc: Mario Limonciello Cc: Basavaraj Natikar Cc: stable@vger.kernel.org Signed-off-by: Mathias Nyman Reviewed-by: Mario Limonciello Link: https://lore.kernel.org/r/20231205090548.1377667-1-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-pci.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index 95ed9404f6f8..d6fc08e5db8f 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -535,8 +535,6 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci) /* xHC spec requires PCI devices to support D3hot and D3cold */ if (xhci->hci_version >= 0x120) xhci->quirks |= XHCI_DEFAULT_PM_RUNTIME_ALLOW; - else if (pdev->vendor == PCI_VENDOR_ID_AMD && xhci->hci_version >= 0x110) - xhci->quirks |= XHCI_DEFAULT_PM_RUNTIME_ALLOW; if (xhci->quirks & XHCI_RESET_ON_RESUME) xhci_dbg_trace(xhci, trace_xhci_dbg_quirks, -- cgit v1.2.3 From bdefd9913bdd453991ef756b6f7176e8ad80d786 Mon Sep 17 00:00:00 2001 From: Lukasz Luba Date: Fri, 1 Dec 2023 12:32:05 +0000 Subject: powercap: DTPM: Fix missing cpufreq_cpu_put() calls The policy returned by cpufreq_cpu_get() has to be released with the help of cpufreq_cpu_put() to balance its kobject reference counter properly. Add the missing calls to cpufreq_cpu_put() in the code. Fixes: 0aea2e4ec2a2 ("powercap/dtpm_cpu: Reset per_cpu variable in the release function") Fixes: 0e8f68d7f048 ("powercap/drivers/dtpm: Add CPU energy model based support") Cc: v5.16+ # v5.16+ Signed-off-by: Lukasz Luba Signed-off-by: Rafael J. Wysocki --- drivers/powercap/dtpm_cpu.c | 17 +++++++++++++---- 1 file changed, 13 insertions(+), 4 deletions(-) diff --git a/drivers/powercap/dtpm_cpu.c b/drivers/powercap/dtpm_cpu.c index 8a2f18fa3faf..9193c3b8edeb 100644 --- a/drivers/powercap/dtpm_cpu.c +++ b/drivers/powercap/dtpm_cpu.c @@ -140,6 +140,8 @@ static void pd_release(struct dtpm *dtpm) if (policy) { for_each_cpu(dtpm_cpu->cpu, policy->related_cpus) per_cpu(dtpm_per_cpu, dtpm_cpu->cpu) = NULL; + + cpufreq_cpu_put(policy); } kfree(dtpm_cpu); @@ -191,12 +193,16 @@ static int __dtpm_cpu_setup(int cpu, struct dtpm *parent) return 0; pd = em_cpu_get(cpu); - if (!pd || em_is_artificial(pd)) - return -EINVAL; + if (!pd || em_is_artificial(pd)) { + ret = -EINVAL; + goto release_policy; + } dtpm_cpu = kzalloc(sizeof(*dtpm_cpu), GFP_KERNEL); - if (!dtpm_cpu) - return -ENOMEM; + if (!dtpm_cpu) { + ret = -ENOMEM; + goto release_policy; + } dtpm_init(&dtpm_cpu->dtpm, &dtpm_ops); dtpm_cpu->cpu = cpu; @@ -216,6 +222,7 @@ static int __dtpm_cpu_setup(int cpu, struct dtpm *parent) if (ret) goto out_dtpm_unregister; + cpufreq_cpu_put(policy); return 0; out_dtpm_unregister: @@ -227,6 +234,8 @@ out_kfree_dtpm_cpu: per_cpu(dtpm_per_cpu, cpu) = NULL; kfree(dtpm_cpu); +release_policy: + cpufreq_cpu_put(policy); return ret; } -- cgit v1.2.3 From 7be76461f302ec05cbd62b90b2a05c64299ca01f Mon Sep 17 00:00:00 2001 From: "Steven Rostedt (Google)" Date: Tue, 5 Dec 2023 16:52:09 -0500 Subject: tracing: Always update snapshot buffer size It use to be that only the top level instance had a snapshot buffer (for latency tracers like wakeup and irqsoff). The update of the ring buffer size would check if the instance was the top level and if so, it would also update the snapshot buffer as it needs to be the same as the main buffer. Now that lower level instances also has a snapshot buffer, they too need to update their snapshot buffer sizes when the main buffer is changed, otherwise the following can be triggered: # cd /sys/kernel/tracing # echo 1500 > buffer_size_kb # mkdir instances/foo # echo irqsoff > instances/foo/current_tracer # echo 1000 > instances/foo/buffer_size_kb Produces: WARNING: CPU: 2 PID: 856 at kernel/trace/trace.c:1938 update_max_tr_single.part.0+0x27d/0x320 Which is: ret = ring_buffer_swap_cpu(tr->max_buffer.buffer, tr->array_buffer.buffer, cpu); if (ret == -EBUSY) { [..] } WARN_ON_ONCE(ret && ret != -EAGAIN && ret != -EBUSY); <== here That's because ring_buffer_swap_cpu() has: int ret = -EINVAL; [..] /* At least make sure the two buffers are somewhat the same */ if (cpu_buffer_a->nr_pages != cpu_buffer_b->nr_pages) goto out; [..] out: return ret; } Instead, update all instances' snapshot buffer sizes when their main buffer size is updated. Link: https://lkml.kernel.org/r/20231205220010.454662151@goodmis.org Cc: stable@vger.kernel.org Cc: Masami Hiramatsu Cc: Mark Rutland Cc: Mathieu Desnoyers Cc: Andrew Morton Fixes: 6d9b3fa5e7f6 ("tracing: Move tracing_max_latency into trace_array") Signed-off-by: Steven Rostedt (Google) --- kernel/trace/trace.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index 9aebf904ff97..231c173ec04f 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -6392,8 +6392,7 @@ static int __tracing_resize_ring_buffer(struct trace_array *tr, return ret; #ifdef CONFIG_TRACER_MAX_TRACE - if (!(tr->flags & TRACE_ARRAY_FL_GLOBAL) || - !tr->current_trace->use_max_tr) + if (!tr->current_trace->use_max_tr) goto out; ret = ring_buffer_resize(tr->max_buffer.buffer, size, cpu); -- cgit v1.2.3 From d78ab792705c7be1b91243b2544d1a79406a2ad7 Mon Sep 17 00:00:00 2001 From: "Steven Rostedt (Google)" Date: Tue, 5 Dec 2023 16:52:10 -0500 Subject: tracing: Stop current tracer when resizing buffer When the ring buffer is being resized, it can cause side effects to the running tracer. For instance, there's a race with irqsoff tracer that swaps individual per cpu buffers between the main buffer and the snapshot buffer. The resize operation modifies the main buffer and then the snapshot buffer. If a swap happens in between those two operations it will break the tracer. Simply stop the running tracer before resizing the buffers and enable it again when finished. Link: https://lkml.kernel.org/r/20231205220010.748996423@goodmis.org Cc: stable@vger.kernel.org Cc: Masami Hiramatsu Cc: Mark Rutland Cc: Mathieu Desnoyers Cc: Andrew Morton Fixes: 3928a8a2d9808 ("ftrace: make work with new ring buffer") Signed-off-by: Steven Rostedt (Google) --- kernel/trace/trace.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index 231c173ec04f..e978868b1a22 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -6387,9 +6387,12 @@ static int __tracing_resize_ring_buffer(struct trace_array *tr, if (!tr->array_buffer.buffer) return 0; + /* Do not allow tracing while resizng ring buffer */ + tracing_stop_tr(tr); + ret = ring_buffer_resize(tr->array_buffer.buffer, size, cpu); if (ret < 0) - return ret; + goto out_start; #ifdef CONFIG_TRACER_MAX_TRACE if (!tr->current_trace->use_max_tr) @@ -6417,7 +6420,7 @@ static int __tracing_resize_ring_buffer(struct trace_array *tr, WARN_ON(1); tracing_disabled = 1; } - return ret; + goto out_start; } update_buffer_entries(&tr->max_buffer, cpu); @@ -6426,7 +6429,8 @@ static int __tracing_resize_ring_buffer(struct trace_array *tr, #endif /* CONFIG_TRACER_MAX_TRACE */ update_buffer_entries(&tr->array_buffer, cpu); - + out_start: + tracing_start_tr(tr); return ret; } -- cgit v1.2.3 From b538bf7d0ec11ca49f536dfda742a5f6db90a798 Mon Sep 17 00:00:00 2001 From: "Steven Rostedt (Google)" Date: Tue, 5 Dec 2023 16:52:11 -0500 Subject: tracing: Disable snapshot buffer when stopping instance tracers It use to be that only the top level instance had a snapshot buffer (for latency tracers like wakeup and irqsoff). When stopping a tracer in an instance would not disable the snapshot buffer. This could have some unintended consequences if the irqsoff tracer is enabled. Consolidate the tracing_start/stop() with tracing_start/stop_tr() so that all instances behave the same. The tracing_start/stop() functions will just call their respective tracing_start/stop_tr() with the global_array passed in. Link: https://lkml.kernel.org/r/20231205220011.041220035@goodmis.org Cc: stable@vger.kernel.org Cc: Masami Hiramatsu Cc: Mark Rutland Cc: Mathieu Desnoyers Cc: Andrew Morton Fixes: 6d9b3fa5e7f6 ("tracing: Move tracing_max_latency into trace_array") Signed-off-by: Steven Rostedt (Google) --- kernel/trace/trace.c | 110 ++++++++++++++++----------------------------------- 1 file changed, 34 insertions(+), 76 deletions(-) diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index e978868b1a22..2492c6c76850 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -2360,13 +2360,7 @@ int is_tracing_stopped(void) return global_trace.stop_count; } -/** - * tracing_start - quick start of the tracer - * - * If tracing is enabled but was stopped by tracing_stop, - * this will start the tracer back up. - */ -void tracing_start(void) +static void tracing_start_tr(struct trace_array *tr) { struct trace_buffer *buffer; unsigned long flags; @@ -2374,119 +2368,83 @@ void tracing_start(void) if (tracing_disabled) return; - raw_spin_lock_irqsave(&global_trace.start_lock, flags); - if (--global_trace.stop_count) { - if (global_trace.stop_count < 0) { + raw_spin_lock_irqsave(&tr->start_lock, flags); + if (--tr->stop_count) { + if (WARN_ON_ONCE(tr->stop_count < 0)) { /* Someone screwed up their debugging */ - WARN_ON_ONCE(1); - global_trace.stop_count = 0; + tr->stop_count = 0; } goto out; } /* Prevent the buffers from switching */ - arch_spin_lock(&global_trace.max_lock); + arch_spin_lock(&tr->max_lock); - buffer = global_trace.array_buffer.buffer; + buffer = tr->array_buffer.buffer; if (buffer) ring_buffer_record_enable(buffer); #ifdef CONFIG_TRACER_MAX_TRACE - buffer = global_trace.max_buffer.buffer; + buffer = tr->max_buffer.buffer; if (buffer) ring_buffer_record_enable(buffer); #endif - arch_spin_unlock(&global_trace.max_lock); - - out: - raw_spin_unlock_irqrestore(&global_trace.start_lock, flags); -} - -static void tracing_start_tr(struct trace_array *tr) -{ - struct trace_buffer *buffer; - unsigned long flags; - - if (tracing_disabled) - return; - - /* If global, we need to also start the max tracer */ - if (tr->flags & TRACE_ARRAY_FL_GLOBAL) - return tracing_start(); - - raw_spin_lock_irqsave(&tr->start_lock, flags); - - if (--tr->stop_count) { - if (tr->stop_count < 0) { - /* Someone screwed up their debugging */ - WARN_ON_ONCE(1); - tr->stop_count = 0; - } - goto out; - } - - buffer = tr->array_buffer.buffer; - if (buffer) - ring_buffer_record_enable(buffer); + arch_spin_unlock(&tr->max_lock); out: raw_spin_unlock_irqrestore(&tr->start_lock, flags); } /** - * tracing_stop - quick stop of the tracer + * tracing_start - quick start of the tracer * - * Light weight way to stop tracing. Use in conjunction with - * tracing_start. + * If tracing is enabled but was stopped by tracing_stop, + * this will start the tracer back up. */ -void tracing_stop(void) +void tracing_start(void) + +{ + return tracing_start_tr(&global_trace); +} + +static void tracing_stop_tr(struct trace_array *tr) { struct trace_buffer *buffer; unsigned long flags; - raw_spin_lock_irqsave(&global_trace.start_lock, flags); - if (global_trace.stop_count++) + raw_spin_lock_irqsave(&tr->start_lock, flags); + if (tr->stop_count++) goto out; /* Prevent the buffers from switching */ - arch_spin_lock(&global_trace.max_lock); + arch_spin_lock(&tr->max_lock); - buffer = global_trace.array_buffer.buffer; + buffer = tr->array_buffer.buffer; if (buffer) ring_buffer_record_disable(buffer); #ifdef CONFIG_TRACER_MAX_TRACE - buffer = global_trace.max_buffer.buffer; + buffer = tr->max_buffer.buffer; if (buffer) ring_buffer_record_disable(buffer); #endif - arch_spin_unlock(&global_trace.max_lock); + arch_spin_unlock(&tr->max_lock); out: - raw_spin_unlock_irqrestore(&global_trace.start_lock, flags); + raw_spin_unlock_irqrestore(&tr->start_lock, flags); } -static void tracing_stop_tr(struct trace_array *tr) +/** + * tracing_stop - quick stop of the tracer + * + * Light weight way to stop tracing. Use in conjunction with + * tracing_start. + */ +void tracing_stop(void) { - struct trace_buffer *buffer; - unsigned long flags; - - /* If global, we need to also stop the max tracer */ - if (tr->flags & TRACE_ARRAY_FL_GLOBAL) - return tracing_stop(); - - raw_spin_lock_irqsave(&tr->start_lock, flags); - if (tr->stop_count++) - goto out; - - buffer = tr->array_buffer.buffer; - if (buffer) - ring_buffer_record_disable(buffer); - - out: - raw_spin_unlock_irqrestore(&tr->start_lock, flags); + return tracing_stop_tr(&global_trace); } static int trace_save_cmdline(struct task_struct *tsk) -- cgit v1.2.3 From 7fed14f7ac9cf5e38c693836fe4a874720141845 Mon Sep 17 00:00:00 2001 From: Petr Pavlu Date: Tue, 5 Dec 2023 17:17:34 +0100 Subject: tracing: Fix incomplete locking when disabling buffered events The following warning appears when using buffered events: [ 203.556451] WARNING: CPU: 53 PID: 10220 at kernel/trace/ring_buffer.c:3912 ring_buffer_discard_commit+0x2eb/0x420 [...] [ 203.670690] CPU: 53 PID: 10220 Comm: stress-ng-sysin Tainted: G E 6.7.0-rc2-default #4 56e6d0fcf5581e6e51eaaecbdaec2a2338c80f3a [ 203.670704] Hardware name: Intel Corp. GROVEPORT/GROVEPORT, BIOS GVPRCRB1.86B.0016.D04.1705030402 05/03/2017 [ 203.670709] RIP: 0010:ring_buffer_discard_commit+0x2eb/0x420 [ 203.735721] Code: 4c 8b 4a 50 48 8b 42 48 49 39 c1 0f 84 b3 00 00 00 49 83 e8 01 75 b1 48 8b 42 10 f0 ff 40 08 0f 0b e9 fc fe ff ff f0 ff 47 08 <0f> 0b e9 77 fd ff ff 48 8b 42 10 f0 ff 40 08 0f 0b e9 f5 fe ff ff [ 203.735734] RSP: 0018:ffffb4ae4f7b7d80 EFLAGS: 00010202 [ 203.735745] RAX: 0000000000000000 RBX: ffffb4ae4f7b7de0 RCX: ffff8ac10662c000 [ 203.735754] RDX: ffff8ac0c750be00 RSI: ffff8ac10662c000 RDI: ffff8ac0c004d400 [ 203.781832] RBP: ffff8ac0c039cea0 R08: 0000000000000000 R09: 0000000000000000 [ 203.781839] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 [ 203.781842] R13: ffff8ac10662c000 R14: ffff8ac0c004d400 R15: ffff8ac10662c008 [ 203.781846] FS: 00007f4cd8a67740(0000) GS:ffff8ad798880000(0000) knlGS:0000000000000000 [ 203.781851] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 203.781855] CR2: 0000559766a74028 CR3: 00000001804c4000 CR4: 00000000001506f0 [ 203.781862] Call Trace: [ 203.781870] [ 203.851949] trace_event_buffer_commit+0x1ea/0x250 [ 203.851967] trace_event_raw_event_sys_enter+0x83/0xe0 [ 203.851983] syscall_trace_enter.isra.0+0x182/0x1a0 [ 203.851990] do_syscall_64+0x3a/0xe0 [ 203.852075] entry_SYSCALL_64_after_hwframe+0x6e/0x76 [ 203.852090] RIP: 0033:0x7f4cd870fa77 [ 203.982920] Code: 00 b8 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 66 90 b8 89 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d e9 43 0e 00 f7 d8 64 89 01 48 [ 203.982932] RSP: 002b:00007fff99717dd8 EFLAGS: 00000246 ORIG_RAX: 0000000000000089 [ 203.982942] RAX: ffffffffffffffda RBX: 0000558ea1d7b6f0 RCX: 00007f4cd870fa77 [ 203.982948] RDX: 0000000000000000 RSI: 00007fff99717de0 RDI: 0000558ea1d7b6f0 [ 203.982957] RBP: 00007fff99717de0 R08: 00007fff997180e0 R09: 00007fff997180e0 [ 203.982962] R10: 00007fff997180e0 R11: 0000000000000246 R12: 00007fff99717f40 [ 204.049239] R13: 00007fff99718590 R14: 0000558e9f2127a8 R15: 00007fff997180b0 [ 204.049256] For instance, it can be triggered by running these two commands in parallel: $ while true; do echo hist:key=id.syscall:val=hitcount > \ /sys/kernel/debug/tracing/events/raw_syscalls/sys_enter/trigger; done $ stress-ng --sysinfo $(nproc) The warning indicates that the current ring_buffer_per_cpu is not in the committing state. It happens because the active ring_buffer_event doesn't actually come from the ring_buffer_per_cpu but is allocated from trace_buffered_event. The bug is in function trace_buffered_event_disable() where the following normally happens: * The code invokes disable_trace_buffered_event() via smp_call_function_many() and follows it by synchronize_rcu(). This increments the per-CPU variable trace_buffered_event_cnt on each target CPU and grants trace_buffered_event_disable() the exclusive access to the per-CPU variable trace_buffered_event. * Maintenance is performed on trace_buffered_event, all per-CPU event buffers get freed. * The code invokes enable_trace_buffered_event() via smp_call_function_many(). This decrements trace_buffered_event_cnt and releases the access to trace_buffered_event. A problem is that smp_call_function_many() runs a given function on all target CPUs except on the current one. The following can then occur: * Task X executing trace_buffered_event_disable() runs on CPU 0. * The control reaches synchronize_rcu() and the task gets rescheduled on another CPU 1. * The RCU synchronization finishes. At this point, trace_buffered_event_disable() has the exclusive access to all trace_buffered_event variables except trace_buffered_event[CPU0] because trace_buffered_event_cnt[CPU0] is never incremented and if the buffer is currently unused, remains set to 0. * A different task Y is scheduled on CPU 0 and hits a trace event. The code in trace_event_buffer_lock_reserve() sees that trace_buffered_event_cnt[CPU0] is set to 0 and decides the use the buffer provided by trace_buffered_event[CPU0]. * Task X continues its execution in trace_buffered_event_disable(). The code incorrectly frees the event buffer pointed by trace_buffered_event[CPU0] and resets the variable to NULL. * Task Y writes event data to the now freed buffer and later detects the created inconsistency. The issue is observable since commit dea499781a11 ("tracing: Fix warning in trace_buffered_event_disable()") which moved the call of trace_buffered_event_disable() in __ftrace_event_enable_disable() earlier, prior to invoking call->class->reg(.. TRACE_REG_UNREGISTER ..). The underlying problem in trace_buffered_event_disable() is however present since the original implementation in commit 0fc1b09ff1ff ("tracing: Use temp buffer when filtering events"). Fix the problem by replacing the two smp_call_function_many() calls with on_each_cpu_mask() which invokes a given callback on all CPUs. Link: https://lore.kernel.org/all/20231127151248.7232-2-petr.pavlu@suse.com/ Link: https://lkml.kernel.org/r/20231205161736.19663-2-petr.pavlu@suse.com Cc: stable@vger.kernel.org Fixes: 0fc1b09ff1ff ("tracing: Use temp buffer when filtering events") Fixes: dea499781a11 ("tracing: Fix warning in trace_buffered_event_disable()") Signed-off-by: Petr Pavlu Signed-off-by: Steven Rostedt (Google) --- kernel/trace/trace.c | 12 ++++-------- 1 file changed, 4 insertions(+), 8 deletions(-) diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index 2492c6c76850..6aeffa4a6994 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -2781,11 +2781,9 @@ void trace_buffered_event_disable(void) if (--trace_buffered_event_ref) return; - preempt_disable(); /* For each CPU, set the buffer as used. */ - smp_call_function_many(tracing_buffer_mask, - disable_trace_buffered_event, NULL, 1); - preempt_enable(); + on_each_cpu_mask(tracing_buffer_mask, disable_trace_buffered_event, + NULL, true); /* Wait for all current users to finish */ synchronize_rcu(); @@ -2800,11 +2798,9 @@ void trace_buffered_event_disable(void) */ smp_wmb(); - preempt_disable(); /* Do the work on each cpu */ - smp_call_function_many(tracing_buffer_mask, - enable_trace_buffered_event, NULL, 1); - preempt_enable(); + on_each_cpu_mask(tracing_buffer_mask, enable_trace_buffered_event, NULL, + true); } static struct trace_buffer *temp_buffer; -- cgit v1.2.3 From 34209fe83ef8404353f91ab4ea4035dbc9922d04 Mon Sep 17 00:00:00 2001 From: Petr Pavlu Date: Tue, 5 Dec 2023 17:17:35 +0100 Subject: tracing: Fix a warning when allocating buffered events fails Function trace_buffered_event_disable() produces an unexpected warning when the previous call to trace_buffered_event_enable() fails to allocate pages for buffered events. The situation can occur as follows: * The counter trace_buffered_event_ref is at 0. * The soft mode gets enabled for some event and trace_buffered_event_enable() is called. The function increments trace_buffered_event_ref to 1 and starts allocating event pages. * The allocation fails for some page and trace_buffered_event_disable() is called for cleanup. * Function trace_buffered_event_disable() decrements trace_buffered_event_ref back to 0, recognizes that it was the last use of buffered events and frees all allocated pages. * The control goes back to trace_buffered_event_enable() which returns. The caller of trace_buffered_event_enable() has no information that the function actually failed. * Some time later, the soft mode is disabled for the same event. Function trace_buffered_event_disable() is called. It warns on "WARN_ON_ONCE(!trace_buffered_event_ref)" and returns. Buffered events are just an optimization and can handle failures. Make trace_buffered_event_enable() exit on the first failure and left any cleanup later to when trace_buffered_event_disable() is called. Link: https://lore.kernel.org/all/20231127151248.7232-2-petr.pavlu@suse.com/ Link: https://lkml.kernel.org/r/20231205161736.19663-3-petr.pavlu@suse.com Fixes: 0fc1b09ff1ff ("tracing: Use temp buffer when filtering events") Signed-off-by: Petr Pavlu Signed-off-by: Steven Rostedt (Google) --- kernel/trace/trace.c | 11 +++++------ 1 file changed, 5 insertions(+), 6 deletions(-) diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index 6aeffa4a6994..ef72354f61ce 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -2728,8 +2728,11 @@ void trace_buffered_event_enable(void) for_each_tracing_cpu(cpu) { page = alloc_pages_node(cpu_to_node(cpu), GFP_KERNEL | __GFP_NORETRY, 0); - if (!page) - goto failed; + /* This is just an optimization and can handle failures */ + if (!page) { + pr_err("Failed to allocate event buffer\n"); + break; + } event = page_address(page); memset(event, 0, sizeof(*event)); @@ -2743,10 +2746,6 @@ void trace_buffered_event_enable(void) WARN_ON_ONCE(1); preempt_enable(); } - - return; - failed: - trace_buffered_event_disable(); } static void enable_trace_buffered_event(void *data) -- cgit v1.2.3 From c0591b1cccf708a47bc465c62436d669a4213323 Mon Sep 17 00:00:00 2001 From: Petr Pavlu Date: Tue, 5 Dec 2023 17:17:36 +0100 Subject: tracing: Fix a possible race when disabling buffered events Function trace_buffered_event_disable() is responsible for freeing pages backing buffered events and this process can run concurrently with trace_event_buffer_lock_reserve(). The following race is currently possible: * Function trace_buffered_event_disable() is called on CPU 0. It increments trace_buffered_event_cnt on each CPU and waits via synchronize_rcu() for each user of trace_buffered_event to complete. * After synchronize_rcu() is finished, function trace_buffered_event_disable() has the exclusive access to trace_buffered_event. All counters trace_buffered_event_cnt are at 1 and all pointers trace_buffered_event are still valid. * At this point, on a different CPU 1, the execution reaches trace_event_buffer_lock_reserve(). The function calls preempt_disable_notrace() and only now enters an RCU read-side critical section. The function proceeds and reads a still valid pointer from trace_buffered_event[CPU1] into the local variable "entry". However, it doesn't yet read trace_buffered_event_cnt[CPU1] which happens later. * Function trace_buffered_event_disable() continues. It frees trace_buffered_event[CPU1] and decrements trace_buffered_event_cnt[CPU1] back to 0. * Function trace_event_buffer_lock_reserve() continues. It reads and increments trace_buffered_event_cnt[CPU1] from 0 to 1. This makes it believe that it can use the "entry" that it already obtained but the pointer is now invalid and any access results in a use-after-free. Fix the problem by making a second synchronize_rcu() call after all trace_buffered_event values are set to NULL. This waits on all potential users in trace_event_buffer_lock_reserve() that still read a previous pointer from trace_buffered_event. Link: https://lore.kernel.org/all/20231127151248.7232-2-petr.pavlu@suse.com/ Link: https://lkml.kernel.org/r/20231205161736.19663-4-petr.pavlu@suse.com Cc: stable@vger.kernel.org Fixes: 0fc1b09ff1ff ("tracing: Use temp buffer when filtering events") Signed-off-by: Petr Pavlu Signed-off-by: Steven Rostedt (Google) --- kernel/trace/trace.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index ef72354f61ce..fbcd3bafb93e 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -2791,13 +2791,17 @@ void trace_buffered_event_disable(void) free_page((unsigned long)per_cpu(trace_buffered_event, cpu)); per_cpu(trace_buffered_event, cpu) = NULL; } + /* - * Make sure trace_buffered_event is NULL before clearing - * trace_buffered_event_cnt. + * Wait for all CPUs that potentially started checking if they can use + * their event buffer only after the previous synchronize_rcu() call and + * they still read a valid pointer from trace_buffered_event. It must be + * ensured they don't see cleared trace_buffered_event_cnt else they + * could wrongly decide to use the pointed-to buffer which is now freed. */ - smp_wmb(); + synchronize_rcu(); - /* Do the work on each cpu */ + /* For each CPU, relinquish the buffer */ on_each_cpu_mask(tracing_buffer_mask, enable_trace_buffered_event, NULL, true); } -- cgit v1.2.3 From 235f2b548d7f4ac5931d834f05d3f7f5166a2e72 Mon Sep 17 00:00:00 2001 From: Dinghao Liu Date: Thu, 23 Nov 2023 16:19:41 +0800 Subject: scsi: be2iscsi: Fix a memleak in beiscsi_init_wrb_handle() When an error occurs in the for loop of beiscsi_init_wrb_handle(), we should free phwi_ctxt->be_wrbq before returning an error code to prevent potential memleak. Fixes: a7909b396ba7 ("[SCSI] be2iscsi: Fix dynamic CID allocation Mechanism in driver") Signed-off-by: Dinghao Liu Link: https://lore.kernel.org/r/20231123081941.24854-1-dinghao.liu@zju.edu.cn Reviewed-by: Mike Christie Signed-off-by: Martin K. Petersen --- drivers/scsi/be2iscsi/be_main.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/scsi/be2iscsi/be_main.c b/drivers/scsi/be2iscsi/be_main.c index e48f14ad6dfd..06acb5ff609e 100644 --- a/drivers/scsi/be2iscsi/be_main.c +++ b/drivers/scsi/be2iscsi/be_main.c @@ -2710,6 +2710,7 @@ init_wrb_hndl_failed: kfree(pwrb_context->pwrb_handle_base); kfree(pwrb_context->pwrb_handle_basestd); } + kfree(phwi_ctxt->be_wrbq); return -ENOMEM; } -- cgit v1.2.3 From 8f1752723019db900fb60a5b9d0dfd3a2bdea36c Mon Sep 17 00:00:00 2001 From: Zizhi Wo Date: Fri, 1 Dec 2023 22:50:48 +0800 Subject: ksmbd: fix memory leak in smb2_lock() In smb2_lock(), if setup_async_work() executes successfully, work->cancel_argv will bind the argv that generated by kmalloc(). And release_async_work() is called in ksmbd_conn_try_dequeue_request() or smb2_lock() to release argv. However, when setup_async_work function fails, work->cancel_argv has not been bound to the argv, resulting in the previously allocated argv not being released. Call kfree() to fix it. Fixes: e2f34481b24d ("cifsd: add server-side procedures for SMB3") Signed-off-by: Zizhi Wo Acked-by: Namjae Jeon Signed-off-by: Steve French --- fs/smb/server/smb2pdu.c | 1 + 1 file changed, 1 insertion(+) diff --git a/fs/smb/server/smb2pdu.c b/fs/smb/server/smb2pdu.c index d369b98a6e10..bf1dea10c9e7 100644 --- a/fs/smb/server/smb2pdu.c +++ b/fs/smb/server/smb2pdu.c @@ -7080,6 +7080,7 @@ skip: smb2_remove_blocked_lock, argv); if (rc) { + kfree(argv); err = -ENOMEM; goto out; } -- cgit v1.2.3 From d045850b628aaf931fc776c90feaf824dca5a1cf Mon Sep 17 00:00:00 2001 From: Namjae Jeon Date: Mon, 4 Dec 2023 22:07:03 +0900 Subject: ksmbd: set epoch in create context v2 lease To support v2 lease(directory lease), ksmbd set epoch in create context v2 lease response. Signed-off-by: Namjae Jeon Signed-off-by: Steve French --- fs/smb/server/oplock.c | 5 ++++- fs/smb/server/oplock.h | 1 + 2 files changed, 5 insertions(+), 1 deletion(-) diff --git a/fs/smb/server/oplock.c b/fs/smb/server/oplock.c index 50c68beb71d6..ff5c83b1fb85 100644 --- a/fs/smb/server/oplock.c +++ b/fs/smb/server/oplock.c @@ -104,7 +104,7 @@ static int alloc_lease(struct oplock_info *opinfo, struct lease_ctx_info *lctx) lease->duration = lctx->duration; memcpy(lease->parent_lease_key, lctx->parent_lease_key, SMB2_LEASE_KEY_SIZE); lease->version = lctx->version; - lease->epoch = 0; + lease->epoch = le16_to_cpu(lctx->epoch); INIT_LIST_HEAD(&opinfo->lease_entry); opinfo->o_lease = lease; @@ -1032,6 +1032,7 @@ static void copy_lease(struct oplock_info *op1, struct oplock_info *op2) SMB2_LEASE_KEY_SIZE); lease2->duration = lease1->duration; lease2->flags = lease1->flags; + lease2->epoch = lease1->epoch++; } static int add_lease_global_list(struct oplock_info *opinfo) @@ -1364,6 +1365,7 @@ void create_lease_buf(u8 *rbuf, struct lease *lease) memcpy(buf->lcontext.LeaseKey, lease->lease_key, SMB2_LEASE_KEY_SIZE); buf->lcontext.LeaseFlags = lease->flags; + buf->lcontext.Epoch = cpu_to_le16(++lease->epoch); buf->lcontext.LeaseState = lease->state; memcpy(buf->lcontext.ParentLeaseKey, lease->parent_lease_key, SMB2_LEASE_KEY_SIZE); @@ -1423,6 +1425,7 @@ struct lease_ctx_info *parse_lease_state(void *open_req) memcpy(lreq->lease_key, lc->lcontext.LeaseKey, SMB2_LEASE_KEY_SIZE); lreq->req_state = lc->lcontext.LeaseState; lreq->flags = lc->lcontext.LeaseFlags; + lreq->epoch = lc->lcontext.Epoch; lreq->duration = lc->lcontext.LeaseDuration; memcpy(lreq->parent_lease_key, lc->lcontext.ParentLeaseKey, SMB2_LEASE_KEY_SIZE); diff --git a/fs/smb/server/oplock.h b/fs/smb/server/oplock.h index 4b0fe6da7694..ad31439c61fe 100644 --- a/fs/smb/server/oplock.h +++ b/fs/smb/server/oplock.h @@ -34,6 +34,7 @@ struct lease_ctx_info { __le32 flags; __le64 duration; __u8 parent_lease_key[SMB2_LEASE_KEY_SIZE]; + __le16 epoch; int version; }; -- cgit v1.2.3 From 18dd1c367c31d0a060f737d48345747662369b64 Mon Sep 17 00:00:00 2001 From: Namjae Jeon Date: Mon, 4 Dec 2023 22:10:16 +0900 Subject: ksmbd: set v2 lease capability Set SMB2_GLOBAL_CAP_DIRECTORY_LEASING to ->capabilities to inform server support directory lease to client. Signed-off-by: Namjae Jeon Signed-off-by: Steve French --- fs/smb/server/oplock.c | 4 ---- fs/smb/server/smb2ops.c | 9 ++++++--- 2 files changed, 6 insertions(+), 7 deletions(-) diff --git a/fs/smb/server/oplock.c b/fs/smb/server/oplock.c index ff5c83b1fb85..5ef6af68d0de 100644 --- a/fs/smb/server/oplock.c +++ b/fs/smb/server/oplock.c @@ -1105,10 +1105,6 @@ int smb_grant_oplock(struct ksmbd_work *work, int req_op_level, u64 pid, bool prev_op_has_lease; __le32 prev_op_state = 0; - /* not support directory lease */ - if (S_ISDIR(file_inode(fp->filp)->i_mode)) - return 0; - opinfo = alloc_opinfo(work, pid, tid); if (!opinfo) return -ENOMEM; diff --git a/fs/smb/server/smb2ops.c b/fs/smb/server/smb2ops.c index aed7704a0672..27a9dce3e03a 100644 --- a/fs/smb/server/smb2ops.c +++ b/fs/smb/server/smb2ops.c @@ -221,7 +221,8 @@ void init_smb3_0_server(struct ksmbd_conn *conn) conn->signing_algorithm = SIGNING_ALG_AES_CMAC_LE; if (server_conf.flags & KSMBD_GLOBAL_FLAG_SMB2_LEASES) - conn->vals->capabilities |= SMB2_GLOBAL_CAP_LEASING; + conn->vals->capabilities |= SMB2_GLOBAL_CAP_LEASING | + SMB2_GLOBAL_CAP_DIRECTORY_LEASING; if (server_conf.flags & KSMBD_GLOBAL_FLAG_SMB2_ENCRYPTION && conn->cli_cap & SMB2_GLOBAL_CAP_ENCRYPTION) @@ -245,7 +246,8 @@ void init_smb3_02_server(struct ksmbd_conn *conn) conn->signing_algorithm = SIGNING_ALG_AES_CMAC_LE; if (server_conf.flags & KSMBD_GLOBAL_FLAG_SMB2_LEASES) - conn->vals->capabilities |= SMB2_GLOBAL_CAP_LEASING; + conn->vals->capabilities |= SMB2_GLOBAL_CAP_LEASING | + SMB2_GLOBAL_CAP_DIRECTORY_LEASING; if (server_conf.flags & KSMBD_GLOBAL_FLAG_SMB2_ENCRYPTION || (!(server_conf.flags & KSMBD_GLOBAL_FLAG_SMB2_ENCRYPTION_OFF) && @@ -270,7 +272,8 @@ int init_smb3_11_server(struct ksmbd_conn *conn) conn->signing_algorithm = SIGNING_ALG_AES_CMAC_LE; if (server_conf.flags & KSMBD_GLOBAL_FLAG_SMB2_LEASES) - conn->vals->capabilities |= SMB2_GLOBAL_CAP_LEASING; + conn->vals->capabilities |= SMB2_GLOBAL_CAP_LEASING | + SMB2_GLOBAL_CAP_DIRECTORY_LEASING; if (server_conf.flags & KSMBD_GLOBAL_FLAG_SMB2_ENCRYPTION || (!(server_conf.flags & KSMBD_GLOBAL_FLAG_SMB2_ENCRYPTION_OFF) && -- cgit v1.2.3 From eb547407f3572d2110cb1194ecd8865b3371a7a4 Mon Sep 17 00:00:00 2001 From: Namjae Jeon Date: Tue, 5 Dec 2023 21:02:03 +0900 Subject: ksmbd: downgrade RWH lease caching state to RH for directory RWH(Read + Write + Handle) caching state is not supported for directory. ksmbd downgrade it to RH for directory if client send RWH caching lease state. Signed-off-by: Namjae Jeon Signed-off-by: Steve French --- fs/smb/server/oplock.c | 9 +++++++-- fs/smb/server/oplock.h | 2 +- fs/smb/server/smb2pdu.c | 8 ++++---- 3 files changed, 12 insertions(+), 7 deletions(-) diff --git a/fs/smb/server/oplock.c b/fs/smb/server/oplock.c index 5ef6af68d0de..57950ba7e925 100644 --- a/fs/smb/server/oplock.c +++ b/fs/smb/server/oplock.c @@ -1398,10 +1398,11 @@ void create_lease_buf(u8 *rbuf, struct lease *lease) /** * parse_lease_state() - parse lease context containted in file open request * @open_req: buffer containing smb2 file open(create) request + * @is_dir: whether leasing file is directory * * Return: oplock state, -ENOENT if create lease context not found */ -struct lease_ctx_info *parse_lease_state(void *open_req) +struct lease_ctx_info *parse_lease_state(void *open_req, bool is_dir) { struct create_context *cc; struct smb2_create_req *req = (struct smb2_create_req *)open_req; @@ -1419,7 +1420,11 @@ struct lease_ctx_info *parse_lease_state(void *open_req) struct create_lease_v2 *lc = (struct create_lease_v2 *)cc; memcpy(lreq->lease_key, lc->lcontext.LeaseKey, SMB2_LEASE_KEY_SIZE); - lreq->req_state = lc->lcontext.LeaseState; + if (is_dir) + lreq->req_state = lc->lcontext.LeaseState & + ~SMB2_LEASE_WRITE_CACHING_LE; + else + lreq->req_state = lc->lcontext.LeaseState; lreq->flags = lc->lcontext.LeaseFlags; lreq->epoch = lc->lcontext.Epoch; lreq->duration = lc->lcontext.LeaseDuration; diff --git a/fs/smb/server/oplock.h b/fs/smb/server/oplock.h index ad31439c61fe..672127318c75 100644 --- a/fs/smb/server/oplock.h +++ b/fs/smb/server/oplock.h @@ -109,7 +109,7 @@ void opinfo_put(struct oplock_info *opinfo); /* Lease related functions */ void create_lease_buf(u8 *rbuf, struct lease *lease); -struct lease_ctx_info *parse_lease_state(void *open_req); +struct lease_ctx_info *parse_lease_state(void *open_req, bool is_dir); __u8 smb2_map_lease_to_oplock(__le32 lease_state); int lease_read_to_write(struct oplock_info *opinfo); diff --git a/fs/smb/server/smb2pdu.c b/fs/smb/server/smb2pdu.c index bf1dea10c9e7..2d3b8acb21e7 100644 --- a/fs/smb/server/smb2pdu.c +++ b/fs/smb/server/smb2pdu.c @@ -2732,10 +2732,6 @@ int smb2_open(struct ksmbd_work *work) } } - req_op_level = req->RequestedOplockLevel; - if (req_op_level == SMB2_OPLOCK_LEVEL_LEASE) - lc = parse_lease_state(req); - if (le32_to_cpu(req->ImpersonationLevel) > le32_to_cpu(IL_DELEGATE)) { pr_err("Invalid impersonationlevel : 0x%x\n", le32_to_cpu(req->ImpersonationLevel)); @@ -3215,6 +3211,10 @@ int smb2_open(struct ksmbd_work *work) need_truncate = 1; } + req_op_level = req->RequestedOplockLevel; + if (req_op_level == SMB2_OPLOCK_LEVEL_LEASE) + lc = parse_lease_state(req, S_ISDIR(file_inode(filp)->i_mode)); + share_ret = ksmbd_smb_check_shared_mode(fp->filp, fp); if (!test_share_config_flag(work->tcon->share_conf, KSMBD_SHARE_FLAG_OPLOCKS) || (req_op_level == SMB2_OPLOCK_LEVEL_LEASE && -- cgit v1.2.3 From 92414333eb375ed64f4ae92d34d579e826936480 Mon Sep 17 00:00:00 2001 From: Paulo Alcantara Date: Tue, 5 Dec 2023 21:49:29 -0300 Subject: smb: client: fix potential NULL deref in parse_dfs_referrals() If server returned no data for FSCTL_DFS_GET_REFERRALS, @dfs_rsp will remain NULL and then parse_dfs_referrals() will dereference it. Fix this by returning -EIO when no output data is returned. Besides, we can't fix it in SMB2_ioctl() as some FSCTLs are allowed to return no data as per MS-SMB2 2.2.32. Fixes: 9d49640a21bf ("CIFS: implement get_dfs_refer for SMB2+") Cc: stable@vger.kernel.org Reported-by: Robert Morris Signed-off-by: Paulo Alcantara (SUSE) Signed-off-by: Steve French --- fs/smb/client/smb2ops.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/fs/smb/client/smb2ops.c b/fs/smb/client/smb2ops.c index 45931115f475..fcfb6566b899 100644 --- a/fs/smb/client/smb2ops.c +++ b/fs/smb/client/smb2ops.c @@ -2836,6 +2836,8 @@ smb2_get_dfs_refer(const unsigned int xid, struct cifs_ses *ses, usleep_range(512, 2048); } while (++retry_count < 5); + if (!rc && !dfs_rsp) + rc = -EIO; if (rc) { if (!is_retryable_error(rc) && rc != -ENOENT && rc != -EOPNOTSUPP) cifs_tcon_dbg(VFS, "%s: ioctl error: rc=%d\n", __func__, rc); -- cgit v1.2.3 From 691a41d8da4b34fe72f09393505f55f28a8f34ec Mon Sep 17 00:00:00 2001 From: David Howells Date: Mon, 4 Dec 2023 14:01:59 +0000 Subject: cifs: Fix non-availability of dedup breaking generic/304 Deduplication isn't supported on cifs, but cifs doesn't reject it, instead treating it as extent duplication/cloning. This can cause generic/304 to go silly and run for hours on end. Fix cifs to indicate EOPNOTSUPP if REMAP_FILE_DEDUP is set in ->remap_file_range(). Note that it's unclear whether or not commit b073a08016a1 is meant to cause cifs to return an error if REMAP_FILE_DEDUP. Fixes: b073a08016a1 ("cifs: fix that return -EINVAL when do dedupe operation") Cc: stable@vger.kernel.org Suggested-by: Dave Chinner cc: Xiaoli Feng cc: Shyam Prasad N cc: Rohith Surabattula cc: Jeff Layton cc: Darrick Wong cc: fstests@vger.kernel.org cc: linux-cifs@vger.kernel.org cc: linux-fsdevel@vger.kernel.org Link: https://lore.kernel.org/r/3876191.1701555260@warthog.procyon.org.uk/ Signed-off-by: David Howells Signed-off-by: Steve French --- fs/smb/client/cifsfs.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/fs/smb/client/cifsfs.c b/fs/smb/client/cifsfs.c index c5fc0a35bb19..2131638f26d0 100644 --- a/fs/smb/client/cifsfs.c +++ b/fs/smb/client/cifsfs.c @@ -1277,7 +1277,9 @@ static loff_t cifs_remap_file_range(struct file *src_file, loff_t off, unsigned int xid; int rc; - if (remap_flags & ~(REMAP_FILE_DEDUP | REMAP_FILE_ADVISORY)) + if (remap_flags & REMAP_FILE_DEDUP) + return -EOPNOTSUPP; + if (remap_flags & ~REMAP_FILE_ADVISORY) return -EINVAL; cifs_dbg(FYI, "clone range\n"); -- cgit v1.2.3 From a61f46e1102545cf1fb5f19992288265362cefb0 Mon Sep 17 00:00:00 2001 From: Lorenzo Bianconi Date: Mon, 4 Dec 2023 16:01:48 +0100 Subject: net: veth: fix packet segmentation in veth_convert_skb_to_xdp_buff Based on the previous allocated packet, page_offset can be not null in veth_convert_skb_to_xdp_buff routine. Take into account page fragment offset during the skb paged area copy in veth_convert_skb_to_xdp_buff(). Fixes: 2d0de67da51a ("net: veth: use newly added page pool API for veth with xdp") Signed-off-by: Lorenzo Bianconi Reviewed-by: Yunsheng Lin Link: https://lore.kernel.org/r/eddfe549e7e626870071930964ac3c38a1dc8068.1701702000.git.lorenzo@kernel.org Signed-off-by: Jakub Kicinski --- drivers/net/veth.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/veth.c b/drivers/net/veth.c index 57efb3454c57..977861c46b1f 100644 --- a/drivers/net/veth.c +++ b/drivers/net/veth.c @@ -790,7 +790,8 @@ static int veth_convert_skb_to_xdp_buff(struct veth_rq *rq, skb_add_rx_frag(nskb, i, page, page_offset, size, truesize); - if (skb_copy_bits(skb, off, page_address(page), + if (skb_copy_bits(skb, off, + page_address(page) + page_offset, size)) { consume_skb(nskb); goto drop; -- cgit v1.2.3 From d007caaaf052f82ca2340d4c7b32d04a3f5dbf3f Mon Sep 17 00:00:00 2001 From: Dinghao Liu Date: Mon, 4 Dec 2023 10:40:04 +0800 Subject: net: bnxt: fix a potential use-after-free in bnxt_init_tc When flow_indr_dev_register() fails, bnxt_init_tc will free bp->tc_info through kfree(). However, the caller function bnxt_init_one() will ignore this failure and call bnxt_shutdown_tc() on failure of bnxt_dl_register(), where a use-after-free happens. Fix this issue by setting bp->tc_info to NULL after kfree(). Fixes: 627c89d00fb9 ("bnxt_en: flow_offload: offload tunnel decap rules via indirect callbacks") Signed-off-by: Dinghao Liu Reviewed-by: Pavan Chebbi Reviewed-by: Michael Chan Reviewed-by: Somnath Kotur Link: https://lore.kernel.org/r/20231204024004.8245-1-dinghao.liu@zju.edu.cn Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/broadcom/bnxt/bnxt_tc.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_tc.c b/drivers/net/ethernet/broadcom/bnxt/bnxt_tc.c index 38d89d80b4a9..273c9ba48f09 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt_tc.c +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_tc.c @@ -2075,6 +2075,7 @@ destroy_flow_table: rhashtable_destroy(&tc_info->flow_table); free_tc_info: kfree(tc_info); + bp->tc_info = NULL; return rc; } -- cgit v1.2.3 From 58d3aade20cdddbac6c9707ac0f3f5f8c1278b74 Mon Sep 17 00:00:00 2001 From: Paolo Abeni Date: Mon, 4 Dec 2023 17:08:05 +0100 Subject: tcp: fix mid stream window clamp. After the blamed commit below, if the user-space application performs window clamping when tp->rcv_wnd is 0, the TCP socket will never be able to announce a non 0 receive window, even after completely emptying the receive buffer and re-setting the window clamp to higher values. Refactor tcp_set_window_clamp() to address the issue: when the user decreases the current clamp value, set rcv_ssthresh according to the same logic used at buffer initialization, but ensuring reserved mem provisioning. To avoid code duplication factor-out the relevant bits from tcp_adjust_rcv_ssthresh() in a new helper and reuse it in the above scenario. When increasing the clamp value, give the rcv_ssthresh a chance to grow according to previously implemented heuristic. Fixes: 3aa7857fe1d7 ("tcp: enable mid stream window clamp") Reported-by: David Gibson Reported-by: Stefano Brivio Signed-off-by: Paolo Abeni Reviewed-by: Eric Dumazet Link: https://lore.kernel.org/r/705dad54e6e6e9a010e571bf58e0b35a8ae70503.1701706073.git.pabeni@redhat.com Signed-off-by: Jakub Kicinski --- include/net/tcp.h | 9 +++++++-- net/ipv4/tcp.c | 22 +++++++++++++++++++--- 2 files changed, 26 insertions(+), 5 deletions(-) diff --git a/include/net/tcp.h b/include/net/tcp.h index d2f0736b76b8..144ba48bb07b 100644 --- a/include/net/tcp.h +++ b/include/net/tcp.h @@ -1514,17 +1514,22 @@ static inline int tcp_full_space(const struct sock *sk) return tcp_win_from_space(sk, READ_ONCE(sk->sk_rcvbuf)); } -static inline void tcp_adjust_rcv_ssthresh(struct sock *sk) +static inline void __tcp_adjust_rcv_ssthresh(struct sock *sk, u32 new_ssthresh) { int unused_mem = sk_unused_reserved_mem(sk); struct tcp_sock *tp = tcp_sk(sk); - tp->rcv_ssthresh = min(tp->rcv_ssthresh, 4U * tp->advmss); + tp->rcv_ssthresh = min(tp->rcv_ssthresh, new_ssthresh); if (unused_mem) tp->rcv_ssthresh = max_t(u32, tp->rcv_ssthresh, tcp_win_from_space(sk, unused_mem)); } +static inline void tcp_adjust_rcv_ssthresh(struct sock *sk) +{ + __tcp_adjust_rcv_ssthresh(sk, 4U * tcp_sk(sk)->advmss); +} + void tcp_cleanup_rbuf(struct sock *sk, int copied); void __tcp_cleanup_rbuf(struct sock *sk, int copied); diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c index 53bcc17c91e4..c9f078224569 100644 --- a/net/ipv4/tcp.c +++ b/net/ipv4/tcp.c @@ -3368,9 +3368,25 @@ int tcp_set_window_clamp(struct sock *sk, int val) return -EINVAL; tp->window_clamp = 0; } else { - tp->window_clamp = val < SOCK_MIN_RCVBUF / 2 ? - SOCK_MIN_RCVBUF / 2 : val; - tp->rcv_ssthresh = min(tp->rcv_wnd, tp->window_clamp); + u32 new_rcv_ssthresh, old_window_clamp = tp->window_clamp; + u32 new_window_clamp = val < SOCK_MIN_RCVBUF / 2 ? + SOCK_MIN_RCVBUF / 2 : val; + + if (new_window_clamp == old_window_clamp) + return 0; + + tp->window_clamp = new_window_clamp; + if (new_window_clamp < old_window_clamp) { + /* need to apply the reserved mem provisioning only + * when shrinking the window clamp + */ + __tcp_adjust_rcv_ssthresh(sk, tp->window_clamp); + + } else { + new_rcv_ssthresh = min(tp->rcv_wnd, tp->window_clamp); + tp->rcv_ssthresh = max(new_rcv_ssthresh, + tp->rcv_ssthresh); + } } return 0; } -- cgit v1.2.3 From 0ceb3860a67652f9d36dfdecfcd2cb3eb2f4537d Mon Sep 17 00:00:00 2001 From: Shannon Nelson Date: Mon, 4 Dec 2023 11:22:33 -0800 Subject: ionic: fix snprintf format length warning Our friendly kernel test robot has reminded us that with a new check we have a warning about a potential string truncation. In this case it really doesn't hurt anything, but it is worth addressing especially since there really is no reason to reserve so many bytes for our queue names. It seems that cutting the queue name buffer length in half stops the complaint. Fixes: c06107cabea3 ("ionic: more ionic name tweaks") Reported-by: kernel test robot Closes: https://lore.kernel.org/oe-kbuild-all/202311300201.lO8v7mKU-lkp@intel.com/ Signed-off-by: Shannon Nelson Reviewed-by: Brett Creeley Reviewed-by: Florian Fainelli Link: https://lore.kernel.org/r/20231204192234.21017-2-shannon.nelson@amd.com Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/pensando/ionic/ionic_dev.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/pensando/ionic/ionic_dev.h b/drivers/net/ethernet/pensando/ionic/ionic_dev.h index 1dbc3cb50b1d..9b5463040075 100644 --- a/drivers/net/ethernet/pensando/ionic/ionic_dev.h +++ b/drivers/net/ethernet/pensando/ionic/ionic_dev.h @@ -223,7 +223,7 @@ struct ionic_desc_info { void *cb_arg; }; -#define IONIC_QUEUE_NAME_MAX_SZ 32 +#define IONIC_QUEUE_NAME_MAX_SZ 16 struct ionic_queue { struct device *dev; -- cgit v1.2.3 From 4115ba677c35f694b62298e55f0e04ce84eed469 Mon Sep 17 00:00:00 2001 From: Brett Creeley Date: Mon, 4 Dec 2023 11:22:34 -0800 Subject: ionic: Fix dim work handling in split interrupt mode Currently ionic_dim_work() is incorrect when in split interrupt mode. This is because the interrupt rate is only being changed for the Rx side even for dim running on Tx. Fix this by using the qcq from the container_of macro. Also, introduce some local variables for a bit of cleanup. Fixes: a6ff85e0a2d9 ("ionic: remove intr coalesce update from napi") Signed-off-by: Brett Creeley Signed-off-by: Shannon Nelson Reviewed-by: Florian Fainelli Link: https://lore.kernel.org/r/20231204192234.21017-3-shannon.nelson@amd.com Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/pensando/ionic/ionic_lif.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/drivers/net/ethernet/pensando/ionic/ionic_lif.c b/drivers/net/ethernet/pensando/ionic/ionic_lif.c index edc14730ce88..bad919343180 100644 --- a/drivers/net/ethernet/pensando/ionic/ionic_lif.c +++ b/drivers/net/ethernet/pensando/ionic/ionic_lif.c @@ -49,24 +49,24 @@ static void ionic_lif_queue_identify(struct ionic_lif *lif); static void ionic_dim_work(struct work_struct *work) { struct dim *dim = container_of(work, struct dim, work); + struct ionic_intr_info *intr; struct dim_cq_moder cur_moder; struct ionic_qcq *qcq; + struct ionic_lif *lif; u32 new_coal; cur_moder = net_dim_get_rx_moderation(dim->mode, dim->profile_ix); qcq = container_of(dim, struct ionic_qcq, dim); - new_coal = ionic_coal_usec_to_hw(qcq->q.lif->ionic, cur_moder.usec); + lif = qcq->q.lif; + new_coal = ionic_coal_usec_to_hw(lif->ionic, cur_moder.usec); new_coal = new_coal ? new_coal : 1; - if (qcq->intr.dim_coal_hw != new_coal) { - unsigned int qi = qcq->cq.bound_q->index; - struct ionic_lif *lif = qcq->q.lif; - - qcq->intr.dim_coal_hw = new_coal; + intr = &qcq->intr; + if (intr->dim_coal_hw != new_coal) { + intr->dim_coal_hw = new_coal; ionic_intr_coal_init(lif->ionic->idev.intr_ctrl, - lif->rxqcqs[qi]->intr.index, - qcq->intr.dim_coal_hw); + intr->index, intr->dim_coal_hw); } dim->state = DIM_START_MEASURE; -- cgit v1.2.3 From 7aebaabfede75feda5c5d16991da74124aee428d Mon Sep 17 00:00:00 2001 From: Kent Overstreet Date: Mon, 4 Dec 2023 15:44:15 -0500 Subject: bcachefs: Fix creating snapshot with implict source When creating a snapshot without specifying the source subvolume, we use the subvolume containing the new snapshot. Previously, this worked if the directory containing the new snapshot was the subvolume root - but we were using the incorrect helper, and got a subvolume ID of 0 when the parent directory wasn't the root of the subvolume, causing an emergency read-only. Signed-off-by: Kent Overstreet --- fs/bcachefs/fs-ioctl.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/bcachefs/fs-ioctl.c b/fs/bcachefs/fs-ioctl.c index 5a39bcb597a3..a70b7a03057d 100644 --- a/fs/bcachefs/fs-ioctl.c +++ b/fs/bcachefs/fs-ioctl.c @@ -413,7 +413,7 @@ retry: if ((arg.flags & BCH_SUBVOL_SNAPSHOT_CREATE) && !arg.src_ptr) - snapshot_src.subvol = to_bch_ei(dir)->ei_inode.bi_subvol; + snapshot_src.subvol = inode_inum(to_bch_ei(dir)).subvol; inode = __bch2_create(file_mnt_idmap(filp), to_bch_ei(dir), dst_dentry, arg.mode|S_IFDIR, -- cgit v1.2.3 From 5796230582f6131fa217f0a1700783c459c847d2 Mon Sep 17 00:00:00 2001 From: Brian Foster Date: Tue, 5 Dec 2023 08:24:38 -0500 Subject: bcachefs: don't attempt rw on unfreeze when shutdown The internal freeze mechanism in bcachefs mostly reuses the generic rw<->ro transition code. If the fs happens to shutdown during or after freeze, a transition back to rw can fail. This is expected, but returning an error from the unfreeze callout prevents the filesystem from being unfrozen. Skip the read write transition if the fs is shutdown. This allows the fs to unfreeze at the vfs level so writes will no longer block, but will still fail due to the emergency read-only state of the fs. Signed-off-by: Brian Foster Signed-off-by: Kent Overstreet --- fs/bcachefs/fs.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/fs/bcachefs/fs.c b/fs/bcachefs/fs.c index 4d51be813509..371565e02ff2 100644 --- a/fs/bcachefs/fs.c +++ b/fs/bcachefs/fs.c @@ -1733,6 +1733,9 @@ static int bch2_unfreeze(struct super_block *sb) struct bch_fs *c = sb->s_fs_info; int ret; + if (test_bit(BCH_FS_EMERGENCY_RO, &c->flags)) + return 0; + down_write(&c->state_lock); ret = bch2_fs_read_write(c); up_write(&c->state_lock); -- cgit v1.2.3 From d863a2f4f47560d71447650822857fc3d2aea715 Mon Sep 17 00:00:00 2001 From: Alexander Stein Date: Mon, 6 Nov 2023 16:13:25 +0100 Subject: arm64: dts: freescale: imx8-ss-lsio: Fix #pwm-cells MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit i.MX8QM/QXP supports inverted PWM output, thus #pwm-cells needs to be set to 3. Fixes: 23fa99b205ea ("arm64: dts: freescale: imx8-ss-lsio: add support for lsio_pwm0-3") Signed-off-by: Alexander Stein Reviewed-by: Uwe Kleine-König Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/imx8-ss-lsio.dtsi | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-lsio.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-lsio.dtsi index 49ad3413db94..7e510b21bbac 100644 --- a/arch/arm64/boot/dts/freescale/imx8-ss-lsio.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8-ss-lsio.dtsi @@ -29,7 +29,7 @@ lsio_subsys: bus@5d000000 { <&pwm0_lpcg 1>; assigned-clocks = <&clk IMX_SC_R_PWM_0 IMX_SC_PM_CLK_PER>; assigned-clock-rates = <24000000>; - #pwm-cells = <2>; + #pwm-cells = <3>; interrupts = ; status = "disabled"; }; @@ -42,7 +42,7 @@ lsio_subsys: bus@5d000000 { <&pwm1_lpcg 1>; assigned-clocks = <&clk IMX_SC_R_PWM_1 IMX_SC_PM_CLK_PER>; assigned-clock-rates = <24000000>; - #pwm-cells = <2>; + #pwm-cells = <3>; interrupts = ; status = "disabled"; }; @@ -55,7 +55,7 @@ lsio_subsys: bus@5d000000 { <&pwm2_lpcg 1>; assigned-clocks = <&clk IMX_SC_R_PWM_2 IMX_SC_PM_CLK_PER>; assigned-clock-rates = <24000000>; - #pwm-cells = <2>; + #pwm-cells = <3>; interrupts = ; status = "disabled"; }; @@ -68,7 +68,7 @@ lsio_subsys: bus@5d000000 { <&pwm3_lpcg 1>; assigned-clocks = <&clk IMX_SC_R_PWM_3 IMX_SC_PM_CLK_PER>; assigned-clock-rates = <24000000>; - #pwm-cells = <2>; + #pwm-cells = <3>; interrupts = ; status = "disabled"; }; -- cgit v1.2.3 From 7cef7c0b1dea1e17c7913826b74403f4ab7edeb9 Mon Sep 17 00:00:00 2001 From: Alexander Stein Date: Mon, 6 Nov 2023 16:13:26 +0100 Subject: arm64: dts: freescale: imx8-ss-dma: Fix #pwm-cells MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit i.MX8QXP supports inverted PWM output, thus #pwm-cells needs to be set to 3. Fixes: f1d6a6b991ef9 ("arm64: dts: imx8qxp: add adma_pwm in adma") Signed-off-by: Alexander Stein Reviewed-by: Uwe Kleine-König Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi index ce66d30a4839..b0bb77150adc 100644 --- a/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi @@ -149,7 +149,7 @@ dma_subsys: bus@5a000000 { clock-names = "ipg", "per"; assigned-clocks = <&clk IMX_SC_R_LCD_0_PWM_0 IMX_SC_PM_CLK_PER>; assigned-clock-rates = <24000000>; - #pwm-cells = <2>; + #pwm-cells = <3>; power-domains = <&pd IMX_SC_R_LCD_0_PWM_0>; }; -- cgit v1.2.3 From b37e75bddc35d4a40a4caeb9921cb95c33c3eba9 Mon Sep 17 00:00:00 2001 From: Xiaolei Wang Date: Fri, 10 Nov 2023 15:25:31 +0800 Subject: arm64: dts: imx8qm: Add imx8qm's own pm to avoid panic during startup Add imx8qm's own pm, otherwise the following panic will occur during the startup process: Kernel panic - not syncing: Asynchronous SError Interrupt Hardware name: Freescale i.MX8QM MEK (DT) Workqueue: events_unbound deferred_probe_work_func Call trace: dump_backtrace+0x98/0xf0 show_stack+0x18/0x24 dump_stack_lvl+0x60/0xac dump_stack+0x18/0x24 panic+0x340/0x3a0 nmi_panic+0x8c/0x90 arm64_serror_panic+0x6c/0x78 do_serror+0x3c/0x78 el1h_64_error_handler+0x38/0x50 el1h_64_error+0x64/0x68 fsl_edma_chan_mux+0x98/0xdc fsl_edma_probe+0x278/0x898 platform_probe+0x68/0xd8 really_probe+0x110/0x27c __driver_probe_device+0x78/0x12c driver_probe_device+0x3c/0x118 __device_attach_driver+0xb8/0xf8 bus_for_each_drv+0x84/0xe4 __device_attach+0xfc/0x18c device_initial_probe+0x14/0x20 Fixes: e4d7a330fb7a ("arm64: dts: imx8: add edma[0..3]") Signed-off-by: Xiaolei Wang Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/imx8qm-ss-dma.dtsi | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/arch/arm64/boot/dts/freescale/imx8qm-ss-dma.dtsi b/arch/arm64/boot/dts/freescale/imx8qm-ss-dma.dtsi index 01539df335f8..8439dd6b3935 100644 --- a/arch/arm64/boot/dts/freescale/imx8qm-ss-dma.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8qm-ss-dma.dtsi @@ -96,6 +96,17 @@ status = "okay"; }; +&edma3 { + power-domains = <&pd IMX_SC_R_DMA_1_CH0>, + <&pd IMX_SC_R_DMA_1_CH1>, + <&pd IMX_SC_R_DMA_1_CH2>, + <&pd IMX_SC_R_DMA_1_CH3>, + <&pd IMX_SC_R_DMA_1_CH4>, + <&pd IMX_SC_R_DMA_1_CH5>, + <&pd IMX_SC_R_DMA_1_CH6>, + <&pd IMX_SC_R_DMA_1_CH7>; +}; + &flexcan1 { fsl,clk-source = /bits/ 8 <1>; }; -- cgit v1.2.3 From d4cb68a5d3a1ed30ecaf1591eb901523faa13496 Mon Sep 17 00:00:00 2001 From: Peng Fan Date: Mon, 13 Nov 2023 18:02:29 +0800 Subject: arm64: dts: imx93: correct mediamix power "nic_media" clock should be enabled when power on/off mediamix, otherwise power on/off will fail. Because "media_axi_root" clock is the parent of "nic_media" clock, so replace "media_axi_clock" clock with "nic_media" clock in mediamix node. Link: https://github.com/nxp-imx/linux-imx/commit/ce18e6d0071ae9df5486af8613708ebe920484be Fixes: f2d03ba997cb ("arm64: dts: imx93: reorder device nodes") Fixes: e85d3458a804 ("arm64: dts: imx93: add src node") Reviewed-by: Jacky Bai Signed-off-by: Peng Fan Signed-off-by: Liu Ying Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/imx93.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/freescale/imx93.dtsi b/arch/arm64/boot/dts/freescale/imx93.dtsi index ceccf4766440..0053f3c89f5f 100644 --- a/arch/arm64/boot/dts/freescale/imx93.dtsi +++ b/arch/arm64/boot/dts/freescale/imx93.dtsi @@ -417,7 +417,7 @@ compatible = "fsl,imx93-src-slice"; reg = <0x44462400 0x400>, <0x44465800 0x400>; #power-domain-cells = <0>; - clocks = <&clk IMX93_CLK_MEDIA_AXI>, + clocks = <&clk IMX93_CLK_NIC_MEDIA_GATE>, <&clk IMX93_CLK_MEDIA_APB>; }; }; -- cgit v1.2.3 From 4af1b258b68c5c948601082d5ce858ba31eb64f4 Mon Sep 17 00:00:00 2001 From: Haibo Chen Date: Wed, 15 Nov 2023 11:56:20 +0800 Subject: arm64: dts: imx93: update gpio node name to align with register address Change the gpio node name to align with register address Fixes: c1d0782b5fc3 ("arm64: dts: imx93: update gpio node") Signed-off-by: Haibo Chen Reviewed-by: Marco Felsch Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/imx93.dtsi | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/arm64/boot/dts/freescale/imx93.dtsi b/arch/arm64/boot/dts/freescale/imx93.dtsi index 0053f3c89f5f..34c0540276d1 100644 --- a/arch/arm64/boot/dts/freescale/imx93.dtsi +++ b/arch/arm64/boot/dts/freescale/imx93.dtsi @@ -957,7 +957,7 @@ }; }; - gpio2: gpio@43810080 { + gpio2: gpio@43810000 { compatible = "fsl,imx93-gpio", "fsl,imx8ulp-gpio"; reg = <0x43810000 0x1000>; gpio-controller; @@ -972,7 +972,7 @@ gpio-ranges = <&iomuxc 0 4 30>; }; - gpio3: gpio@43820080 { + gpio3: gpio@43820000 { compatible = "fsl,imx93-gpio", "fsl,imx8ulp-gpio"; reg = <0x43820000 0x1000>; gpio-controller; @@ -988,7 +988,7 @@ <&iomuxc 26 34 2>, <&iomuxc 28 0 4>; }; - gpio4: gpio@43830080 { + gpio4: gpio@43830000 { compatible = "fsl,imx93-gpio", "fsl,imx8ulp-gpio"; reg = <0x43830000 0x1000>; gpio-controller; @@ -1003,7 +1003,7 @@ gpio-ranges = <&iomuxc 0 38 28>, <&iomuxc 28 36 2>; }; - gpio1: gpio@47400080 { + gpio1: gpio@47400000 { compatible = "fsl,imx93-gpio", "fsl,imx8ulp-gpio"; reg = <0x47400000 0x1000>; gpio-controller; -- cgit v1.2.3 From 8ae06f1366390972fdcce0f0cee3cac0f63b3209 Mon Sep 17 00:00:00 2001 From: Haibo Chen Date: Wed, 15 Nov 2023 11:56:21 +0800 Subject: arm64: dts: imx8ulp: update gpio node name to align with register address Change the gpio node name to align with register address. Fixes: ac7bcf48ddba ("arm64: dts: imx8ulp: update gpio node") Signed-off-by: Haibo Chen Reviewed-by: Marco Felsch Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/imx8ulp.dtsi | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/arm64/boot/dts/freescale/imx8ulp.dtsi b/arch/arm64/boot/dts/freescale/imx8ulp.dtsi index f22c1ac391c9..c4a0082f30d3 100644 --- a/arch/arm64/boot/dts/freescale/imx8ulp.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8ulp.dtsi @@ -483,7 +483,7 @@ }; }; - gpioe: gpio@2d000080 { + gpioe: gpio@2d000000 { compatible = "fsl,imx8ulp-gpio"; reg = <0x2d000000 0x1000>; gpio-controller; @@ -498,7 +498,7 @@ gpio-ranges = <&iomuxc1 0 32 24>; }; - gpiof: gpio@2d010080 { + gpiof: gpio@2d010000 { compatible = "fsl,imx8ulp-gpio"; reg = <0x2d010000 0x1000>; gpio-controller; @@ -534,7 +534,7 @@ }; }; - gpiod: gpio@2e200080 { + gpiod: gpio@2e200000 { compatible = "fsl,imx8ulp-gpio"; reg = <0x2e200000 0x1000>; gpio-controller; -- cgit v1.2.3 From 1c2b1049af3f86545fcc5fae0fc725fb64b3a09e Mon Sep 17 00:00:00 2001 From: Kunwu Chan Date: Wed, 22 Nov 2023 14:46:36 +0800 Subject: ARM: imx: Check return value of devm_kasprintf in imx_mmdc_perf_init devm_kasprintf() returns a pointer to dynamically allocated memory which can be NULL upon failure. Ensure the allocation was successful by checking the pointer validity. Release the id allocated in 'mmdc_pmu_init' when 'devm_kasprintf' return NULL Suggested-by: Ahmad Fatoum Fixes: e76bdfd7403a ("ARM: imx: Added perf functionality to mmdc driver") Signed-off-by: Kunwu Chan Signed-off-by: Shawn Guo --- arch/arm/mach-imx/mmdc.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-imx/mmdc.c b/arch/arm/mach-imx/mmdc.c index 2157493b78a9..df69af932375 100644 --- a/arch/arm/mach-imx/mmdc.c +++ b/arch/arm/mach-imx/mmdc.c @@ -501,6 +501,10 @@ static int imx_mmdc_perf_init(struct platform_device *pdev, void __iomem *mmdc_b name = devm_kasprintf(&pdev->dev, GFP_KERNEL, "mmdc%d", ret); + if (!name) { + ret = -ENOMEM; + goto pmu_release_id; + } pmu_mmdc->mmdc_ipg_clk = mmdc_ipg_clk; pmu_mmdc->devtype_data = (struct fsl_mmdc_devtype_data *)of_id->data; @@ -523,9 +527,10 @@ static int imx_mmdc_perf_init(struct platform_device *pdev, void __iomem *mmdc_b pmu_register_err: pr_warn("MMDC Perf PMU failed (%d), disabled\n", ret); - ida_simple_remove(&mmdc_ida, pmu_mmdc->id); cpuhp_state_remove_instance_nocalls(cpuhp_mmdc_state, &pmu_mmdc->node); hrtimer_cancel(&pmu_mmdc->hrtimer); +pmu_release_id: + ida_simple_remove(&mmdc_ida, pmu_mmdc->id); pmu_free: kfree(pmu_mmdc); return ret; -- cgit v1.2.3 From 04179605ab604dba32571a05cd06423afc9eca19 Mon Sep 17 00:00:00 2001 From: Stefan Eichenberger Date: Thu, 23 Nov 2023 11:48:12 +0100 Subject: arm64: dts: imx8-apalis: set wifi regulator to always-on Make sure that the wifi regulator is always on. The wifi driver itself puts the wifi module into suspend mode. If we cut the power the driver will crash when resuming from suspend. Signed-off-by: Stefan Eichenberger Signed-off-by: Francesco Dolcini Fixes: ad0de4ceb706 ("arm64: dts: freescale: add initial apalis imx8 aka quadmax module support") Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/imx8-apalis-v1.1.dtsi | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/arch/arm64/boot/dts/freescale/imx8-apalis-v1.1.dtsi b/arch/arm64/boot/dts/freescale/imx8-apalis-v1.1.dtsi index 5ce5fbf2b38e..f69b0c17560a 100644 --- a/arch/arm64/boot/dts/freescale/imx8-apalis-v1.1.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8-apalis-v1.1.dtsi @@ -82,12 +82,9 @@ pinctrl-0 = <&pinctrl_wifi_pdn>; gpio = <&lsio_gpio1 28 GPIO_ACTIVE_HIGH>; enable-active-high; + regulator-always-on; regulator-name = "wifi_pwrdn_fake_regulator"; regulator-settling-time-us = <100>; - - regulator-state-mem { - regulator-off-in-suspend; - }; }; reg_pcie_switch: regulator-pcie-switch { -- cgit v1.2.3 From 15a1c7f3e8d9c16e65644b83ad96895164fb2988 Mon Sep 17 00:00:00 2001 From: Ahmad Fatoum Date: Mon, 27 Nov 2023 06:34:14 +0100 Subject: MAINTAINERS: reinstate freescale ARM64 DT directory in i.MX entry The MAINTAINERS entry's F: currently only matches the 32-bit device trees, as commit 724ba6751532 ("ARM: dts: Move .dts files to vendor sub-directories") inadvertently dropped the 64-bit DT match when it added the 32 bit matches. The entry has a N: imx, which reduced the impact a bit, but still some board device trees may not contain the substring and would thus not be covered by the entry. Reinstate the missing F: line to restore previous behavior. Fixes: 724ba6751532 ("ARM: dts: Move .dts files to vendor sub-directories") Signed-off-by: Ahmad Fatoum Signed-off-by: Shawn Guo --- MAINTAINERS | 1 + 1 file changed, 1 insertion(+) diff --git a/MAINTAINERS b/MAINTAINERS index 97f51d5ec1cf..339a17370910 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2155,6 +2155,7 @@ S: Maintained T: git git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git F: arch/arm/boot/dts/nxp/imx/ F: arch/arm/boot/dts/nxp/mxs/ +F: arch/arm64/boot/dts/freescale/ X: arch/arm64/boot/dts/freescale/fsl-* X: arch/arm64/boot/dts/freescale/qoriq-* X: drivers/media/i2c/ -- cgit v1.2.3 From 397caf68e2d36532054cb14ae8995537f27f8b61 Mon Sep 17 00:00:00 2001 From: Philipp Zabel Date: Mon, 27 Nov 2023 17:05:01 +0100 Subject: ARM: dts: imx7: Declare timers compatible with fsl,imx6dl-gpt The timer nodes declare compatibility with "fsl,imx6sx-gpt", which itself is compatible with "fsl,imx6dl-gpt". Switch the fallback compatible from "fsl,imx6sx-gpt" to "fsl,imx6dl-gpt". Fixes: 949673450291 ("ARM: dts: add imx7d soc dtsi file") Signed-off-by: Philipp Zabel Signed-off-by: Roland Hieber Signed-off-by: Shawn Guo --- arch/arm/boot/dts/nxp/imx/imx7s.dtsi | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/arm/boot/dts/nxp/imx/imx7s.dtsi b/arch/arm/boot/dts/nxp/imx/imx7s.dtsi index 29b8fd03567a..5387da8a2a0a 100644 --- a/arch/arm/boot/dts/nxp/imx/imx7s.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx7s.dtsi @@ -454,7 +454,7 @@ }; gpt1: timer@302d0000 { - compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt"; + compatible = "fsl,imx7d-gpt", "fsl,imx6dl-gpt"; reg = <0x302d0000 0x10000>; interrupts = ; clocks = <&clks IMX7D_GPT1_ROOT_CLK>, @@ -463,7 +463,7 @@ }; gpt2: timer@302e0000 { - compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt"; + compatible = "fsl,imx7d-gpt", "fsl,imx6dl-gpt"; reg = <0x302e0000 0x10000>; interrupts = ; clocks = <&clks IMX7D_GPT2_ROOT_CLK>, @@ -473,7 +473,7 @@ }; gpt3: timer@302f0000 { - compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt"; + compatible = "fsl,imx7d-gpt", "fsl,imx6dl-gpt"; reg = <0x302f0000 0x10000>; interrupts = ; clocks = <&clks IMX7D_GPT3_ROOT_CLK>, @@ -483,7 +483,7 @@ }; gpt4: timer@30300000 { - compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt"; + compatible = "fsl,imx7d-gpt", "fsl,imx6dl-gpt"; reg = <0x30300000 0x10000>; interrupts = ; clocks = <&clks IMX7D_GPT4_ROOT_CLK>, -- cgit v1.2.3 From 2b3a7a302c9804e463f2ea5b54dc3a6ad106a344 Mon Sep 17 00:00:00 2001 From: Jason Zhang Date: Wed, 6 Dec 2023 09:31:39 +0800 Subject: ALSA: pcm: fix out-of-bounds in snd_pcm_state_names The pcm state can be SNDRV_PCM_STATE_DISCONNECTED at disconnect callback, and there is not an entry of SNDRV_PCM_STATE_DISCONNECTED in snd_pcm_state_names. This patch adds the missing entry to resolve this issue. cat /proc/asound/card2/pcm0p/sub0/status That results in stack traces like the following: [ 99.702732][ T5171] Unexpected kernel BRK exception at EL1 [ 99.702774][ T5171] Internal error: BRK handler: f2005512 [#1] PREEMPT SMP [ 99.703858][ T5171] Modules linked in: bcmdhd(E) (...) [ 99.747425][ T5171] CPU: 3 PID: 5171 Comm: cat Tainted: G C OE 5.10.189-android13-4-00003-g4a17384380d8-ab11086999 #1 [ 99.748447][ T5171] Hardware name: Rockchip RK3588 CVTE V10 Board (DT) [ 99.749024][ T5171] pstate: 60400005 (nZCv daif +PAN -UAO -TCO BTYPE=--) [ 99.749616][ T5171] pc : snd_pcm_substream_proc_status_read+0x264/0x2bc [ 99.750204][ T5171] lr : snd_pcm_substream_proc_status_read+0xa4/0x2bc [ 99.750778][ T5171] sp : ffffffc0175abae0 [ 99.751132][ T5171] x29: ffffffc0175abb80 x28: ffffffc009a2c498 [ 99.751665][ T5171] x27: 0000000000000001 x26: ffffff810cbae6e8 [ 99.752199][ T5171] x25: 0000000000400cc0 x24: ffffffc0175abc60 [ 99.752729][ T5171] x23: 0000000000000000 x22: ffffff802f558400 [ 99.753263][ T5171] x21: ffffff81d8d8ff00 x20: ffffff81020cdc00 [ 99.753795][ T5171] x19: ffffff802d110000 x18: ffffffc014fbd058 [ 99.754326][ T5171] x17: 0000000000000000 x16: 0000000000000000 [ 99.754861][ T5171] x15: 000000000000c276 x14: ffffffff9a976fda [ 99.755392][ T5171] x13: 0000000065689089 x12: 000000000000d72e [ 99.755923][ T5171] x11: ffffff802d110000 x10: 00000000000000e0 [ 99.756457][ T5171] x9 : 9c431600c8385d00 x8 : 0000000000000008 [ 99.756990][ T5171] x7 : 0000000000000000 x6 : 000000000000003f [ 99.757522][ T5171] x5 : 0000000000000040 x4 : ffffffc0175abb70 [ 99.758056][ T5171] x3 : 0000000000000001 x2 : 0000000000000001 [ 99.758588][ T5171] x1 : 0000000000000000 x0 : 0000000000000000 [ 99.759123][ T5171] Call trace: [ 99.759404][ T5171] snd_pcm_substream_proc_status_read+0x264/0x2bc [ 99.759958][ T5171] snd_info_seq_show+0x54/0xa4 [ 99.760370][ T5171] seq_read_iter+0x19c/0x7d4 [ 99.760770][ T5171] seq_read+0xf0/0x128 [ 99.761117][ T5171] proc_reg_read+0x100/0x1f8 [ 99.761515][ T5171] vfs_read+0xf4/0x354 [ 99.761869][ T5171] ksys_read+0x7c/0x148 [ 99.762226][ T5171] __arm64_sys_read+0x20/0x30 [ 99.762625][ T5171] el0_svc_common+0xd0/0x1e4 [ 99.763023][ T5171] el0_svc+0x28/0x98 [ 99.763358][ T5171] el0_sync_handler+0x8c/0xf0 [ 99.763759][ T5171] el0_sync+0x1b8/0x1c0 [ 99.764118][ T5171] Code: d65f03c0 b9406102 17ffffae 94191565 (d42aa240) [ 99.764715][ T5171] ---[ end trace 1eeffa3e17c58e10 ]--- [ 99.780720][ T5171] Kernel panic - not syncing: BRK handler: Fatal exception Signed-off-by: Jason Zhang Cc: Link: https://lore.kernel.org/r/20231206013139.20506-1-jason.zhang@rock-chips.com Signed-off-by: Takashi Iwai --- sound/core/pcm.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/core/pcm.c b/sound/core/pcm.c index 20bb2d7c8d4b..6d0c9c37796c 100644 --- a/sound/core/pcm.c +++ b/sound/core/pcm.c @@ -253,6 +253,7 @@ static const char * const snd_pcm_state_names[] = { STATE(DRAINING), STATE(PAUSED), STATE(SUSPENDED), + STATE(DISCONNECTED), }; static const char * const snd_pcm_access_names[] = { -- cgit v1.2.3 From 80d875cfc9d3711a029f234ef7d680db79e8fa4b Mon Sep 17 00:00:00 2001 From: Shigeru Yoshida Date: Sun, 3 Dec 2023 01:14:41 +0900 Subject: ipv4: ip_gre: Avoid skb_pull() failure in ipgre_xmit() In ipgre_xmit(), skb_pull() may fail even if pskb_inet_may_pull() returns true. For example, applications can use PF_PACKET to create a malformed packet with no IP header. This type of packet causes a problem such as uninit-value access. This patch ensures that skb_pull() can pull the required size by checking the skb with pskb_network_may_pull() before skb_pull(). Fixes: c54419321455 ("GRE: Refactor GRE tunneling code.") Signed-off-by: Shigeru Yoshida Reviewed-by: Eric Dumazet Reviewed-by: Suman Ghosh Link: https://lore.kernel.org/r/20231202161441.221135-1-syoshida@redhat.com Signed-off-by: Paolo Abeni --- net/ipv4/ip_gre.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) diff --git a/net/ipv4/ip_gre.c b/net/ipv4/ip_gre.c index 22a26d1d29a0..5169c3c72cff 100644 --- a/net/ipv4/ip_gre.c +++ b/net/ipv4/ip_gre.c @@ -635,15 +635,18 @@ static netdev_tx_t ipgre_xmit(struct sk_buff *skb, } if (dev->header_ops) { + int pull_len = tunnel->hlen + sizeof(struct iphdr); + if (skb_cow_head(skb, 0)) goto free_skb; tnl_params = (const struct iphdr *)skb->data; - /* Pull skb since ip_tunnel_xmit() needs skb->data pointing - * to gre header. - */ - skb_pull(skb, tunnel->hlen + sizeof(struct iphdr)); + if (!pskb_network_may_pull(skb, pull_len)) + goto free_skb; + + /* ip_tunnel_xmit() needs skb->data pointing to gre header. */ + skb_pull(skb, pull_len); skb_reset_mac_header(skb); if (skb->ip_summed == CHECKSUM_PARTIAL && -- cgit v1.2.3 From 63ef8fc9bcee6b73ca445a19a7ac6bd544723c9f Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Tue, 5 Dec 2023 10:27:35 -0300 Subject: ARM: dts: imx28-xea: Pass the 'model' property Per root-node.yaml, 'model' is a required property. Pass it to fix the following dt-schema warning: imx28-xea.dtb: /: 'model' is a required property from schema $id: http://devicetree.org/schemas/root-node.yaml# Signed-off-by: Fabio Estevam Fixes: 445ae16ac1c5 ("ARM: dts: imx28: Add DTS description of imx28 based XEA board") Signed-off-by: Shawn Guo --- arch/arm/boot/dts/nxp/mxs/imx28-xea.dts | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-xea.dts b/arch/arm/boot/dts/nxp/mxs/imx28-xea.dts index a400c108f66a..6c5e6856648a 100644 --- a/arch/arm/boot/dts/nxp/mxs/imx28-xea.dts +++ b/arch/arm/boot/dts/nxp/mxs/imx28-xea.dts @@ -8,6 +8,7 @@ #include "imx28-lwe.dtsi" / { + model = "Liebherr XEA board"; compatible = "lwn,imx28-xea", "fsl,imx28"; }; -- cgit v1.2.3 From 37f3d6108730713c411827ab4af764909f4dfc78 Mon Sep 17 00:00:00 2001 From: Sam Edwards Date: Tue, 5 Dec 2023 12:29:00 -0800 Subject: arm64: dts: rockchip: Fix eMMC Data Strobe PD on rk3588 JEDEC standard JESD84-B51 defines the eMMC Data Strobe line, which is currently used only in HS400 mode, as a device->host clock signal that "is used only in read operation. The Data Strobe is always High-Z (not driven by the device and pulled down by RDS) or Driven Low in write operation, except during CRC status response." RDS is a pull-down resistor specified in the 10K-100K ohm range. Thus per the standard, the Data Strobe is always pulled to ground (by the eMMC and/or RDS) during write operations. Evidently, the eMMC host controller in the RK3588 considers an active voltage on the eMMC-DS line during a write to be an error. The default (i.e. hardware reset, and Rockchip BSP) behavior for the RK3588 is to activate the eMMC-DS pin's builtin pull-down. As a result, many RK3588 board designers do not bother adding a dedicated RDS resistor, instead relying on the RK3588's internal bias. The current devicetree, however, disables this bias (`pcfg_pull_none`), breaking HS400-mode writes for boards without a dedicated RDS, but with an eMMC chip that chooses to High-Z (instead of drive-low) the eMMC-DS line. (The Turing RK1 is one such board.) Fix this by changing the bias in the (common) emmc_data_strobe case to reflect the expected hardware/BSP behavior. This is unlikely to cause regressions elsewhere: the pull-down is only relevant for High-Z eMMCs, and if this is redundant with a (dedicated) RDS resistor, the effective result is only a lower resistance to ground -- where the range of tolerance is quite high. If it does, it's better fixed in the specific devicetrees. Fixes: d85f8a5c798d5 ("arm64: dts: rockchip: Add rk3588 pinctrl data") Signed-off-by: Sam Edwards Link: https://lore.kernel.org/r/20231205202900.4617-2-CFSworks@gmail.com Signed-off-by: Heiko Stuebner --- arch/arm64/boot/dts/rockchip/rk3588s-pinctrl.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-pinctrl.dtsi b/arch/arm64/boot/dts/rockchip/rk3588s-pinctrl.dtsi index 63151d9d2377..30db12c4fc82 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588s-pinctrl.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3588s-pinctrl.dtsi @@ -369,7 +369,7 @@ emmc_data_strobe: emmc-data-strobe { rockchip,pins = /* emmc_data_strobe */ - <2 RK_PA2 1 &pcfg_pull_none>; + <2 RK_PA2 1 &pcfg_pull_down>; }; }; -- cgit v1.2.3 From 7037d95a047cd89b1f680eed253c6ab586bef1ed Mon Sep 17 00:00:00 2001 From: Kelly Kane Date: Sat, 2 Dec 2023 17:17:12 -0800 Subject: r8152: add vendor/device ID pair for ASUS USB-C2500 The ASUS USB-C2500 is an RTL8156 based 2.5G Ethernet controller. Add the vendor and product ID values to the driver. This makes Ethernet work with the adapter. Signed-off-by: Kelly Kane Link: https://lore.kernel.org/r/20231203011712.6314-1-kelly@hawknetworks.com Signed-off-by: Paolo Abeni --- drivers/net/usb/r8152.c | 1 + include/linux/usb/r8152.h | 1 + 2 files changed, 2 insertions(+) diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c index fcdc9ba0f826..9bf2140fd0a1 100644 --- a/drivers/net/usb/r8152.c +++ b/drivers/net/usb/r8152.c @@ -10049,6 +10049,7 @@ static const struct usb_device_id rtl8152_table[] = { { USB_DEVICE(VENDOR_ID_NVIDIA, 0x09ff) }, { USB_DEVICE(VENDOR_ID_TPLINK, 0x0601) }, { USB_DEVICE(VENDOR_ID_DLINK, 0xb301) }, + { USB_DEVICE(VENDOR_ID_ASUS, 0x1976) }, {} }; diff --git a/include/linux/usb/r8152.h b/include/linux/usb/r8152.h index 287e9d83fb8b..33a4c146dc19 100644 --- a/include/linux/usb/r8152.h +++ b/include/linux/usb/r8152.h @@ -30,6 +30,7 @@ #define VENDOR_ID_NVIDIA 0x0955 #define VENDOR_ID_TPLINK 0x2357 #define VENDOR_ID_DLINK 0x2001 +#define VENDOR_ID_ASUS 0x0b05 #if IS_REACHABLE(CONFIG_USB_RTL8152) extern u8 rtl8152_get_version(struct usb_interface *intf); -- cgit v1.2.3 From e0f04e41e8eedd4e5a1275f2318df7e1841855f2 Mon Sep 17 00:00:00 2001 From: Thomas Zimmermann Date: Mon, 4 Dec 2023 09:32:33 +0100 Subject: drm/atomic-helpers: Invoke end_fb_access while owning plane state Invoke drm_plane_helper_funcs.end_fb_access before drm_atomic_helper_commit_hw_done(). The latter function hands over ownership of the plane state to the following commit, which might free it. Releasing resources in end_fb_access then operates on undefined state. This bug has been observed with non-blocking commits when they are being queued up quickly. Here is an example stack trace from the bug report. The plane state has been free'd already, so the pages for drm_gem_fb_vunmap() are gone. Unable to handle kernel paging request at virtual address 0000000100000049 [...] drm_gem_fb_vunmap+0x18/0x74 drm_gem_end_shadow_fb_access+0x1c/0x2c drm_atomic_helper_cleanup_planes+0x58/0xd8 drm_atomic_helper_commit_tail+0x90/0xa0 commit_tail+0x15c/0x188 commit_work+0x14/0x20 Fix this by running end_fb_access immediately after updating all planes in drm_atomic_helper_commit_planes(). The existing clean-up helper drm_atomic_helper_cleanup_planes() now only handles cleanup_fb. For aborted commits, roll back from drm_atomic_helper_prepare_planes() in the new helper drm_atomic_helper_unprepare_planes(). This case is different from regular cleanup, as we have to release the new state; regular cleanup releases the old state. The new helper also invokes cleanup_fb for all planes. The changes mostly involve DRM's atomic helpers. Only two drivers, i915 and nouveau, implement their own commit function. Update them to invoke drm_atomic_helper_unprepare_planes(). Drivers with custom commit_tail function do not require changes. v4: * fix documentation (kernel test robot) v3: * add drm_atomic_helper_unprepare_planes() for rolling back * use correct state for end_fb_access v2: * fix test in drm_atomic_helper_cleanup_planes() Reported-by: Alyssa Ross Closes: https://lore.kernel.org/dri-devel/87leazm0ya.fsf@alyssa.is/ Suggested-by: Daniel Vetter Fixes: 94d879eaf7fb ("drm/atomic-helper: Add {begin,end}_fb_access to plane helpers") Tested-by: Alyssa Ross Reviewed-by: Alyssa Ross Signed-off-by: Thomas Zimmermann Cc: # v6.2+ Link: https://patchwork.freedesktop.org/patch/msgid/20231204083247.22006-1-tzimmermann@suse.de --- drivers/gpu/drm/drm_atomic_helper.c | 78 ++++++++++++++++++---------- drivers/gpu/drm/i915/display/intel_display.c | 2 +- drivers/gpu/drm/nouveau/dispnv50/disp.c | 2 +- include/drm/drm_atomic_helper.h | 2 + 4 files changed, 56 insertions(+), 28 deletions(-) diff --git a/drivers/gpu/drm/drm_atomic_helper.c b/drivers/gpu/drm/drm_atomic_helper.c index 2444fc33dd7c..68ffcc0b00dc 100644 --- a/drivers/gpu/drm/drm_atomic_helper.c +++ b/drivers/gpu/drm/drm_atomic_helper.c @@ -2012,7 +2012,7 @@ int drm_atomic_helper_commit(struct drm_device *dev, return ret; drm_atomic_helper_async_commit(dev, state); - drm_atomic_helper_cleanup_planes(dev, state); + drm_atomic_helper_unprepare_planes(dev, state); return 0; } @@ -2072,7 +2072,7 @@ int drm_atomic_helper_commit(struct drm_device *dev, return 0; err: - drm_atomic_helper_cleanup_planes(dev, state); + drm_atomic_helper_unprepare_planes(dev, state); return ret; } EXPORT_SYMBOL(drm_atomic_helper_commit); @@ -2650,6 +2650,39 @@ fail_prepare_fb: } EXPORT_SYMBOL(drm_atomic_helper_prepare_planes); +/** + * drm_atomic_helper_unprepare_planes - release plane resources on aborts + * @dev: DRM device + * @state: atomic state object with old state structures + * + * This function cleans up plane state, specifically framebuffers, from the + * atomic state. It undoes the effects of drm_atomic_helper_prepare_planes() + * when aborting an atomic commit. For cleaning up after a successful commit + * use drm_atomic_helper_cleanup_planes(). + */ +void drm_atomic_helper_unprepare_planes(struct drm_device *dev, + struct drm_atomic_state *state) +{ + struct drm_plane *plane; + struct drm_plane_state *new_plane_state; + int i; + + for_each_new_plane_in_state(state, plane, new_plane_state, i) { + const struct drm_plane_helper_funcs *funcs = plane->helper_private; + + if (funcs->end_fb_access) + funcs->end_fb_access(plane, new_plane_state); + } + + for_each_new_plane_in_state(state, plane, new_plane_state, i) { + const struct drm_plane_helper_funcs *funcs = plane->helper_private; + + if (funcs->cleanup_fb) + funcs->cleanup_fb(plane, new_plane_state); + } +} +EXPORT_SYMBOL(drm_atomic_helper_unprepare_planes); + static bool plane_crtc_active(const struct drm_plane_state *state) { return state->crtc && state->crtc->state->active; @@ -2784,6 +2817,17 @@ void drm_atomic_helper_commit_planes(struct drm_device *dev, funcs->atomic_flush(crtc, old_state); } + + /* + * Signal end of framebuffer access here before hw_done. After hw_done, + * a later commit might have already released the plane state. + */ + for_each_old_plane_in_state(old_state, plane, old_plane_state, i) { + const struct drm_plane_helper_funcs *funcs = plane->helper_private; + + if (funcs->end_fb_access) + funcs->end_fb_access(plane, old_plane_state); + } } EXPORT_SYMBOL(drm_atomic_helper_commit_planes); @@ -2911,40 +2955,22 @@ EXPORT_SYMBOL(drm_atomic_helper_disable_planes_on_crtc); * configuration. Hence the old configuration must be perserved in @old_state to * be able to call this function. * - * This function must also be called on the new state when the atomic update - * fails at any point after calling drm_atomic_helper_prepare_planes(). + * This function may not be called on the new state when the atomic update + * fails at any point after calling drm_atomic_helper_prepare_planes(). Use + * drm_atomic_helper_unprepare_planes() in this case. */ void drm_atomic_helper_cleanup_planes(struct drm_device *dev, struct drm_atomic_state *old_state) { struct drm_plane *plane; - struct drm_plane_state *old_plane_state, *new_plane_state; + struct drm_plane_state *old_plane_state; int i; - for_each_oldnew_plane_in_state(old_state, plane, old_plane_state, new_plane_state, i) { + for_each_old_plane_in_state(old_state, plane, old_plane_state, i) { const struct drm_plane_helper_funcs *funcs = plane->helper_private; - if (funcs->end_fb_access) - funcs->end_fb_access(plane, new_plane_state); - } - - for_each_oldnew_plane_in_state(old_state, plane, old_plane_state, new_plane_state, i) { - const struct drm_plane_helper_funcs *funcs; - struct drm_plane_state *plane_state; - - /* - * This might be called before swapping when commit is aborted, - * in which case we have to cleanup the new state. - */ - if (old_plane_state == plane->state) - plane_state = new_plane_state; - else - plane_state = old_plane_state; - - funcs = plane->helper_private; - if (funcs->cleanup_fb) - funcs->cleanup_fb(plane, plane_state); + funcs->cleanup_fb(plane, old_plane_state); } } EXPORT_SYMBOL(drm_atomic_helper_cleanup_planes); diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c index 28d85e1e858e..02f873738905 100644 --- a/drivers/gpu/drm/i915/display/intel_display.c +++ b/drivers/gpu/drm/i915/display/intel_display.c @@ -7475,7 +7475,7 @@ int intel_atomic_commit(struct drm_device *dev, struct drm_atomic_state *_state, for_each_new_intel_crtc_in_state(state, crtc, new_crtc_state, i) intel_color_cleanup_commit(new_crtc_state); - drm_atomic_helper_cleanup_planes(dev, &state->base); + drm_atomic_helper_unprepare_planes(dev, &state->base); intel_runtime_pm_put(&dev_priv->runtime_pm, state->wakeref); return ret; } diff --git a/drivers/gpu/drm/nouveau/dispnv50/disp.c b/drivers/gpu/drm/nouveau/dispnv50/disp.c index 7840b6428afb..118807e38422 100644 --- a/drivers/gpu/drm/nouveau/dispnv50/disp.c +++ b/drivers/gpu/drm/nouveau/dispnv50/disp.c @@ -2474,7 +2474,7 @@ nv50_disp_atomic_commit(struct drm_device *dev, err_cleanup: if (ret) - drm_atomic_helper_cleanup_planes(dev, state); + drm_atomic_helper_unprepare_planes(dev, state); done: pm_runtime_put_autosuspend(dev->dev); return ret; diff --git a/include/drm/drm_atomic_helper.h b/include/drm/drm_atomic_helper.h index 536a0b0091c3..006b5c977ad7 100644 --- a/include/drm/drm_atomic_helper.h +++ b/include/drm/drm_atomic_helper.h @@ -97,6 +97,8 @@ void drm_atomic_helper_commit_modeset_enables(struct drm_device *dev, int drm_atomic_helper_prepare_planes(struct drm_device *dev, struct drm_atomic_state *state); +void drm_atomic_helper_unprepare_planes(struct drm_device *dev, + struct drm_atomic_state *state); #define DRM_PLANE_COMMIT_ACTIVE_ONLY BIT(0) #define DRM_PLANE_COMMIT_NO_DISABLE_AFTER_MODESET BIT(1) -- cgit v1.2.3 From cbe860be36095e68e4e5561ab43610982fb429fd Mon Sep 17 00:00:00 2001 From: Daniil Maximov Date: Mon, 4 Dec 2023 11:58:10 +0300 Subject: net: atlantic: Fix NULL dereference of skb pointer in If is_ptp_ring == true in the loop of __aq_ring_xdp_clean function, then a timestamp is stored from a packet in a field of skb object, which is not allocated at the moment of the call (skb == NULL). Generalize aq_ptp_extract_ts and other affected functions so they don't work with struct sk_buff*, but with struct skb_shared_hwtstamps*. Found by Linux Verification Center (linuxtesting.org) with SVACE Fixes: 26efaef759a1 ("net: atlantic: Implement xdp data plane") Signed-off-by: Daniil Maximov Reviewed-by: Igor Russkikh Link: https://lore.kernel.org/r/20231204085810.1681386-1-daniil31415it@gmail.com Signed-off-by: Paolo Abeni --- drivers/net/ethernet/aquantia/atlantic/aq_ptp.c | 10 +++++----- drivers/net/ethernet/aquantia/atlantic/aq_ptp.h | 4 ++-- drivers/net/ethernet/aquantia/atlantic/aq_ring.c | 18 ++++++++++++------ 3 files changed, 19 insertions(+), 13 deletions(-) diff --git a/drivers/net/ethernet/aquantia/atlantic/aq_ptp.c b/drivers/net/ethernet/aquantia/atlantic/aq_ptp.c index 80b44043e6c5..28c9b6f1a54f 100644 --- a/drivers/net/ethernet/aquantia/atlantic/aq_ptp.c +++ b/drivers/net/ethernet/aquantia/atlantic/aq_ptp.c @@ -553,17 +553,17 @@ void aq_ptp_tx_hwtstamp(struct aq_nic_s *aq_nic, u64 timestamp) /* aq_ptp_rx_hwtstamp - utility function which checks for RX time stamp * @adapter: pointer to adapter struct - * @skb: particular skb to send timestamp with + * @shhwtstamps: particular skb_shared_hwtstamps to save timestamp * * if the timestamp is valid, we convert it into the timecounter ns * value, then store that result into the hwtstamps structure which * is passed up the network stack */ -static void aq_ptp_rx_hwtstamp(struct aq_ptp_s *aq_ptp, struct sk_buff *skb, +static void aq_ptp_rx_hwtstamp(struct aq_ptp_s *aq_ptp, struct skb_shared_hwtstamps *shhwtstamps, u64 timestamp) { timestamp -= atomic_read(&aq_ptp->offset_ingress); - aq_ptp_convert_to_hwtstamp(aq_ptp, skb_hwtstamps(skb), timestamp); + aq_ptp_convert_to_hwtstamp(aq_ptp, shhwtstamps, timestamp); } void aq_ptp_hwtstamp_config_get(struct aq_ptp_s *aq_ptp, @@ -639,7 +639,7 @@ bool aq_ptp_ring(struct aq_nic_s *aq_nic, struct aq_ring_s *ring) &aq_ptp->ptp_rx == ring || &aq_ptp->hwts_rx == ring; } -u16 aq_ptp_extract_ts(struct aq_nic_s *aq_nic, struct sk_buff *skb, u8 *p, +u16 aq_ptp_extract_ts(struct aq_nic_s *aq_nic, struct skb_shared_hwtstamps *shhwtstamps, u8 *p, unsigned int len) { struct aq_ptp_s *aq_ptp = aq_nic->aq_ptp; @@ -648,7 +648,7 @@ u16 aq_ptp_extract_ts(struct aq_nic_s *aq_nic, struct sk_buff *skb, u8 *p, p, len, ×tamp); if (ret > 0) - aq_ptp_rx_hwtstamp(aq_ptp, skb, timestamp); + aq_ptp_rx_hwtstamp(aq_ptp, shhwtstamps, timestamp); return ret; } diff --git a/drivers/net/ethernet/aquantia/atlantic/aq_ptp.h b/drivers/net/ethernet/aquantia/atlantic/aq_ptp.h index 28ccb7ca2df9..210b723f2207 100644 --- a/drivers/net/ethernet/aquantia/atlantic/aq_ptp.h +++ b/drivers/net/ethernet/aquantia/atlantic/aq_ptp.h @@ -67,7 +67,7 @@ int aq_ptp_hwtstamp_config_set(struct aq_ptp_s *aq_ptp, /* Return either ring is belong to PTP or not*/ bool aq_ptp_ring(struct aq_nic_s *aq_nic, struct aq_ring_s *ring); -u16 aq_ptp_extract_ts(struct aq_nic_s *aq_nic, struct sk_buff *skb, u8 *p, +u16 aq_ptp_extract_ts(struct aq_nic_s *aq_nic, struct skb_shared_hwtstamps *shhwtstamps, u8 *p, unsigned int len); struct ptp_clock *aq_ptp_get_ptp_clock(struct aq_ptp_s *aq_ptp); @@ -143,7 +143,7 @@ static inline bool aq_ptp_ring(struct aq_nic_s *aq_nic, struct aq_ring_s *ring) } static inline u16 aq_ptp_extract_ts(struct aq_nic_s *aq_nic, - struct sk_buff *skb, u8 *p, + struct skb_shared_hwtstamps *shhwtstamps, u8 *p, unsigned int len) { return 0; diff --git a/drivers/net/ethernet/aquantia/atlantic/aq_ring.c b/drivers/net/ethernet/aquantia/atlantic/aq_ring.c index 4de22eed099a..694daeaf3e61 100644 --- a/drivers/net/ethernet/aquantia/atlantic/aq_ring.c +++ b/drivers/net/ethernet/aquantia/atlantic/aq_ring.c @@ -647,7 +647,7 @@ static int __aq_ring_rx_clean(struct aq_ring_s *self, struct napi_struct *napi, } if (is_ptp_ring) buff->len -= - aq_ptp_extract_ts(self->aq_nic, skb, + aq_ptp_extract_ts(self->aq_nic, skb_hwtstamps(skb), aq_buf_vaddr(&buff->rxdata), buff->len); @@ -742,6 +742,8 @@ static int __aq_ring_xdp_clean(struct aq_ring_s *rx_ring, struct aq_ring_buff_s *buff = &rx_ring->buff_ring[rx_ring->sw_head]; bool is_ptp_ring = aq_ptp_ring(rx_ring->aq_nic, rx_ring); struct aq_ring_buff_s *buff_ = NULL; + u16 ptp_hwtstamp_len = 0; + struct skb_shared_hwtstamps shhwtstamps; struct sk_buff *skb = NULL; unsigned int next_ = 0U; struct xdp_buff xdp; @@ -810,11 +812,12 @@ static int __aq_ring_xdp_clean(struct aq_ring_s *rx_ring, hard_start = page_address(buff->rxdata.page) + buff->rxdata.pg_off - rx_ring->page_offset; - if (is_ptp_ring) - buff->len -= - aq_ptp_extract_ts(rx_ring->aq_nic, skb, - aq_buf_vaddr(&buff->rxdata), - buff->len); + if (is_ptp_ring) { + ptp_hwtstamp_len = aq_ptp_extract_ts(rx_ring->aq_nic, &shhwtstamps, + aq_buf_vaddr(&buff->rxdata), + buff->len); + buff->len -= ptp_hwtstamp_len; + } xdp_init_buff(&xdp, frame_sz, &rx_ring->xdp_rxq); xdp_prepare_buff(&xdp, hard_start, rx_ring->page_offset, @@ -834,6 +837,9 @@ static int __aq_ring_xdp_clean(struct aq_ring_s *rx_ring, if (IS_ERR(skb) || !skb) continue; + if (ptp_hwtstamp_len > 0) + *skb_hwtstamps(skb) = shhwtstamps; + if (buff->is_vlan) __vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), buff->vlan_rx_tag); -- cgit v1.2.3 From 84757d0839451b20b11e993128f0a77393ca50c1 Mon Sep 17 00:00:00 2001 From: Yonglong Liu Date: Mon, 4 Dec 2023 22:32:31 +0800 Subject: net: hns: fix wrong head when modify the tx feature when sending packets Upon changing the tx feature, the hns driver will modify the maybe_stop_tx() and fill_desc() functions, if the modify happens during packet sending, will cause the hardware and software pointers do not match, and the port can not work anymore. This patch deletes the maybe_stop_tx() and fill_desc() functions modification when setting tx feature, and use the skb_is_gro() to determine which functions to use in the tx path. Fixes: 38f616da1c28 ("net:hns: Add support of ethtool TSO set option for Hip06 in HNS") Signed-off-by: Yonglong Liu Signed-off-by: Jijie Shao Reviewed-by: Wojciech Drewek Signed-off-by: Paolo Abeni --- drivers/net/ethernet/hisilicon/hns/hns_enet.c | 53 ++++++++++++++++----------- drivers/net/ethernet/hisilicon/hns/hns_enet.h | 3 +- 2 files changed, 33 insertions(+), 23 deletions(-) diff --git a/drivers/net/ethernet/hisilicon/hns/hns_enet.c b/drivers/net/ethernet/hisilicon/hns/hns_enet.c index 0900abf5c508..8a713eed4465 100644 --- a/drivers/net/ethernet/hisilicon/hns/hns_enet.c +++ b/drivers/net/ethernet/hisilicon/hns/hns_enet.c @@ -142,7 +142,8 @@ MODULE_DEVICE_TABLE(acpi, hns_enet_acpi_match); static void fill_desc(struct hnae_ring *ring, void *priv, int size, dma_addr_t dma, int frag_end, - int buf_num, enum hns_desc_type type, int mtu) + int buf_num, enum hns_desc_type type, int mtu, + bool is_gso) { struct hnae_desc *desc = &ring->desc[ring->next_to_use]; struct hnae_desc_cb *desc_cb = &ring->desc_cb[ring->next_to_use]; @@ -275,6 +276,15 @@ static int hns_nic_maybe_stop_tso( return 0; } +static int hns_nic_maybe_stop_tx_v2(struct sk_buff **out_skb, int *bnum, + struct hnae_ring *ring) +{ + if (skb_is_gso(*out_skb)) + return hns_nic_maybe_stop_tso(out_skb, bnum, ring); + else + return hns_nic_maybe_stop_tx(out_skb, bnum, ring); +} + static void fill_tso_desc(struct hnae_ring *ring, void *priv, int size, dma_addr_t dma, int frag_end, int buf_num, enum hns_desc_type type, int mtu) @@ -300,6 +310,19 @@ static void fill_tso_desc(struct hnae_ring *ring, void *priv, mtu); } +static void fill_desc_v2(struct hnae_ring *ring, void *priv, + int size, dma_addr_t dma, int frag_end, + int buf_num, enum hns_desc_type type, int mtu, + bool is_gso) +{ + if (is_gso) + fill_tso_desc(ring, priv, size, dma, frag_end, buf_num, type, + mtu); + else + fill_v2_desc(ring, priv, size, dma, frag_end, buf_num, type, + mtu); +} + netdev_tx_t hns_nic_net_xmit_hw(struct net_device *ndev, struct sk_buff *skb, struct hns_nic_ring_data *ring_data) @@ -313,6 +336,7 @@ netdev_tx_t hns_nic_net_xmit_hw(struct net_device *ndev, int seg_num; dma_addr_t dma; int size, next_to_use; + bool is_gso; int i; switch (priv->ops.maybe_stop_tx(&skb, &buf_num, ring)) { @@ -339,8 +363,9 @@ netdev_tx_t hns_nic_net_xmit_hw(struct net_device *ndev, ring->stats.sw_err_cnt++; goto out_err_tx_ok; } + is_gso = skb_is_gso(skb); priv->ops.fill_desc(ring, skb, size, dma, seg_num == 1 ? 1 : 0, - buf_num, DESC_TYPE_SKB, ndev->mtu); + buf_num, DESC_TYPE_SKB, ndev->mtu, is_gso); /* fill the fragments */ for (i = 1; i < seg_num; i++) { @@ -354,7 +379,7 @@ netdev_tx_t hns_nic_net_xmit_hw(struct net_device *ndev, } priv->ops.fill_desc(ring, skb_frag_page(frag), size, dma, seg_num - 1 == i ? 1 : 0, buf_num, - DESC_TYPE_PAGE, ndev->mtu); + DESC_TYPE_PAGE, ndev->mtu, is_gso); } /*complete translate all packets*/ @@ -1776,15 +1801,6 @@ static int hns_nic_set_features(struct net_device *netdev, netdev_info(netdev, "enet v1 do not support tso!\n"); break; default: - if (features & (NETIF_F_TSO | NETIF_F_TSO6)) { - priv->ops.fill_desc = fill_tso_desc; - priv->ops.maybe_stop_tx = hns_nic_maybe_stop_tso; - /* The chip only support 7*4096 */ - netif_set_tso_max_size(netdev, 7 * 4096); - } else { - priv->ops.fill_desc = fill_v2_desc; - priv->ops.maybe_stop_tx = hns_nic_maybe_stop_tx; - } break; } netdev->features = features; @@ -2159,16 +2175,9 @@ static void hns_nic_set_priv_ops(struct net_device *netdev) priv->ops.maybe_stop_tx = hns_nic_maybe_stop_tx; } else { priv->ops.get_rxd_bnum = get_v2rx_desc_bnum; - if ((netdev->features & NETIF_F_TSO) || - (netdev->features & NETIF_F_TSO6)) { - priv->ops.fill_desc = fill_tso_desc; - priv->ops.maybe_stop_tx = hns_nic_maybe_stop_tso; - /* This chip only support 7*4096 */ - netif_set_tso_max_size(netdev, 7 * 4096); - } else { - priv->ops.fill_desc = fill_v2_desc; - priv->ops.maybe_stop_tx = hns_nic_maybe_stop_tx; - } + priv->ops.fill_desc = fill_desc_v2; + priv->ops.maybe_stop_tx = hns_nic_maybe_stop_tx_v2; + netif_set_tso_max_size(netdev, 7 * 4096); /* enable tso when init * control tso on/off through TSE bit in bd */ diff --git a/drivers/net/ethernet/hisilicon/hns/hns_enet.h b/drivers/net/ethernet/hisilicon/hns/hns_enet.h index ffa9d6573f54..3f3ee032f631 100644 --- a/drivers/net/ethernet/hisilicon/hns/hns_enet.h +++ b/drivers/net/ethernet/hisilicon/hns/hns_enet.h @@ -44,7 +44,8 @@ struct hns_nic_ring_data { struct hns_nic_ops { void (*fill_desc)(struct hnae_ring *ring, void *priv, int size, dma_addr_t dma, int frag_end, - int buf_num, enum hns_desc_type type, int mtu); + int buf_num, enum hns_desc_type type, int mtu, + bool is_gso); int (*maybe_stop_tx)(struct sk_buff **out_skb, int *bnum, struct hnae_ring *ring); void (*get_rxd_bnum)(u32 bnum_flag, int *out_bnum); -- cgit v1.2.3 From f708aba40f9c1eeb9c7e93ed4863b5f85b09b288 Mon Sep 17 00:00:00 2001 From: Yonglong Liu Date: Mon, 4 Dec 2023 22:32:32 +0800 Subject: net: hns: fix fake link up on xge port If a xge port just connect with an optical module and no fiber, it may have a fake link up because there may be interference on the hardware. This patch adds an anti-shake to avoid the problem. And the time of anti-shake is base on tests. Fixes: b917078c1c10 ("net: hns: Add ACPI support to check SFP present") Signed-off-by: Yonglong Liu Signed-off-by: Jijie Shao Reviewed-by: Wojciech Drewek Signed-off-by: Paolo Abeni --- drivers/net/ethernet/hisilicon/hns/hns_dsaf_mac.c | 29 +++++++++++++++++++++++ 1 file changed, 29 insertions(+) diff --git a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_mac.c b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_mac.c index 928d934cb21a..f75668c47935 100644 --- a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_mac.c +++ b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_mac.c @@ -66,6 +66,27 @@ static enum mac_mode hns_get_enet_interface(const struct hns_mac_cb *mac_cb) } } +static u32 hns_mac_link_anti_shake(struct mac_driver *mac_ctrl_drv) +{ +#define HNS_MAC_LINK_WAIT_TIME 5 +#define HNS_MAC_LINK_WAIT_CNT 40 + + u32 link_status = 0; + int i; + + if (!mac_ctrl_drv->get_link_status) + return link_status; + + for (i = 0; i < HNS_MAC_LINK_WAIT_CNT; i++) { + msleep(HNS_MAC_LINK_WAIT_TIME); + mac_ctrl_drv->get_link_status(mac_ctrl_drv, &link_status); + if (!link_status) + break; + } + + return link_status; +} + void hns_mac_get_link_status(struct hns_mac_cb *mac_cb, u32 *link_status) { struct mac_driver *mac_ctrl_drv; @@ -83,6 +104,14 @@ void hns_mac_get_link_status(struct hns_mac_cb *mac_cb, u32 *link_status) &sfp_prsnt); if (!ret) *link_status = *link_status && sfp_prsnt; + + /* for FIBER port, it may have a fake link up. + * when the link status changes from down to up, we need to do + * anti-shake. the anti-shake time is base on tests. + * only FIBER port need to do this. + */ + if (*link_status && !mac_cb->link) + *link_status = hns_mac_link_anti_shake(mac_ctrl_drv); } mac_cb->link = *link_status; -- cgit v1.2.3 From 714589c2742209cc228991b115e48548fb8d89cf Mon Sep 17 00:00:00 2001 From: Dmitry Safonov Date: Mon, 4 Dec 2023 19:00:40 +0000 Subject: Documentation/tcp: Fix an obvious typo Yep, my VIM spellchecker is not good enough for typos like this one. Fixes: 7fe0e38bb669 ("Documentation/tcp: Add TCP-AO documentation") Cc: Jonathan Corbet Cc: linux-doc@vger.kernel.org Reported-by: Markus Elfring Closes: https://lore.kernel.org/all/2745ab4e-acac-40d4-83bf-37f2600d0c3d@web.de/ Signed-off-by: Dmitry Safonov Signed-off-by: Paolo Abeni --- Documentation/networking/tcp_ao.rst | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/networking/tcp_ao.rst b/Documentation/networking/tcp_ao.rst index cfa5bf1cc542..8a58321acce7 100644 --- a/Documentation/networking/tcp_ao.rst +++ b/Documentation/networking/tcp_ao.rst @@ -99,7 +99,7 @@ also [6.1]:: when it is no longer considered permitted. Linux TCP-AO will try its best to prevent you from removing a key that's -being used, considering it a key management failure. But sine keeping +being used, considering it a key management failure. But since keeping an outdated key may become a security issue and as a peer may unintentionally prevent the removal of an old key by always setting it as RNextKeyID - a forced key removal mechanism is provided, where -- cgit v1.2.3 From da7dfaa6d6f731c30eca6ffa808b83634d43e26f Mon Sep 17 00:00:00 2001 From: Dmitry Safonov Date: Mon, 4 Dec 2023 19:00:41 +0000 Subject: net/tcp: Consistently align TCP-AO option in the header Currently functions that pre-calculate TCP header options length use unaligned TCP-AO header + MAC-length for skb reservation. And the functions that actually write TCP-AO options into skb do align the header. Nothing good can come out of this for ((maclen % 4) != 0). Provide tcp_ao_len_aligned() helper and use it everywhere for TCP header options space calculations. Fixes: 1e03d32bea8e ("net/tcp: Add TCP-AO sign to outgoing packets") Signed-off-by: Dmitry Safonov Reviewed-by: Eric Dumazet Signed-off-by: Paolo Abeni --- include/net/tcp_ao.h | 6 ++++++ net/ipv4/tcp_ao.c | 4 ++-- net/ipv4/tcp_ipv4.c | 4 ++-- net/ipv4/tcp_minisocks.c | 2 +- net/ipv4/tcp_output.c | 6 +++--- net/ipv6/tcp_ipv6.c | 2 +- 6 files changed, 15 insertions(+), 9 deletions(-) diff --git a/include/net/tcp_ao.h b/include/net/tcp_ao.h index b56be10838f0..647781080613 100644 --- a/include/net/tcp_ao.h +++ b/include/net/tcp_ao.h @@ -62,11 +62,17 @@ static inline int tcp_ao_maclen(const struct tcp_ao_key *key) return key->maclen; } +/* Use tcp_ao_len_aligned() for TCP header calculations */ static inline int tcp_ao_len(const struct tcp_ao_key *key) { return tcp_ao_maclen(key) + sizeof(struct tcp_ao_hdr); } +static inline int tcp_ao_len_aligned(const struct tcp_ao_key *key) +{ + return round_up(tcp_ao_len(key), 4); +} + static inline unsigned int tcp_ao_digest_size(struct tcp_ao_key *key) { return key->digest_size; diff --git a/net/ipv4/tcp_ao.c b/net/ipv4/tcp_ao.c index 7696417d0640..c8be1d526eac 100644 --- a/net/ipv4/tcp_ao.c +++ b/net/ipv4/tcp_ao.c @@ -1100,7 +1100,7 @@ void tcp_ao_connect_init(struct sock *sk) ao_info->current_key = key; if (!ao_info->rnext_key) ao_info->rnext_key = key; - tp->tcp_header_len += tcp_ao_len(key); + tp->tcp_header_len += tcp_ao_len_aligned(key); ao_info->lisn = htonl(tp->write_seq); ao_info->snd_sne = 0; @@ -1346,7 +1346,7 @@ static int tcp_ao_parse_crypto(struct tcp_ao_add *cmd, struct tcp_ao_key *key) syn_tcp_option_space -= TCPOLEN_MSS_ALIGNED; syn_tcp_option_space -= TCPOLEN_TSTAMP_ALIGNED; syn_tcp_option_space -= TCPOLEN_WSCALE_ALIGNED; - if (tcp_ao_len(key) > syn_tcp_option_space) { + if (tcp_ao_len_aligned(key) > syn_tcp_option_space) { err = -EMSGSIZE; goto err_kfree; } diff --git a/net/ipv4/tcp_ipv4.c b/net/ipv4/tcp_ipv4.c index 5f693bbd578d..0c50c5a32b84 100644 --- a/net/ipv4/tcp_ipv4.c +++ b/net/ipv4/tcp_ipv4.c @@ -690,7 +690,7 @@ static bool tcp_v4_ao_sign_reset(const struct sock *sk, struct sk_buff *skb, reply_options[0] = htonl((TCPOPT_AO << 24) | (tcp_ao_len(key) << 16) | (aoh->rnext_keyid << 8) | keyid); - arg->iov[0].iov_len += round_up(tcp_ao_len(key), 4); + arg->iov[0].iov_len += tcp_ao_len_aligned(key); reply->doff = arg->iov[0].iov_len / 4; if (tcp_ao_hash_hdr(AF_INET, (char *)&reply_options[1], @@ -978,7 +978,7 @@ static void tcp_v4_send_ack(const struct sock *sk, (tcp_ao_len(key->ao_key) << 16) | (key->ao_key->sndid << 8) | key->rcv_next); - arg.iov[0].iov_len += round_up(tcp_ao_len(key->ao_key), 4); + arg.iov[0].iov_len += tcp_ao_len_aligned(key->ao_key); rep.th.doff = arg.iov[0].iov_len / 4; tcp_ao_hash_hdr(AF_INET, (char *)&rep.opt[offset], diff --git a/net/ipv4/tcp_minisocks.c b/net/ipv4/tcp_minisocks.c index a9807eeb311c..9e85f2a0bddd 100644 --- a/net/ipv4/tcp_minisocks.c +++ b/net/ipv4/tcp_minisocks.c @@ -615,7 +615,7 @@ struct sock *tcp_create_openreq_child(const struct sock *sk, ao_key = treq->af_specific->ao_lookup(sk, req, tcp_rsk(req)->ao_keyid, -1); if (ao_key) - newtp->tcp_header_len += tcp_ao_len(ao_key); + newtp->tcp_header_len += tcp_ao_len_aligned(ao_key); #endif if (skb->len >= TCP_MSS_DEFAULT + newtp->tcp_header_len) newicsk->icsk_ack.last_seg_size = skb->len - newtp->tcp_header_len; diff --git a/net/ipv4/tcp_output.c b/net/ipv4/tcp_output.c index eb13a55d660c..93eef1dbbc55 100644 --- a/net/ipv4/tcp_output.c +++ b/net/ipv4/tcp_output.c @@ -825,7 +825,7 @@ static unsigned int tcp_syn_options(struct sock *sk, struct sk_buff *skb, timestamps = READ_ONCE(sock_net(sk)->ipv4.sysctl_tcp_timestamps); if (tcp_key_is_ao(key)) { opts->options |= OPTION_AO; - remaining -= tcp_ao_len(key->ao_key); + remaining -= tcp_ao_len_aligned(key->ao_key); } } @@ -915,7 +915,7 @@ static unsigned int tcp_synack_options(const struct sock *sk, ireq->tstamp_ok &= !ireq->sack_ok; } else if (tcp_key_is_ao(key)) { opts->options |= OPTION_AO; - remaining -= tcp_ao_len(key->ao_key); + remaining -= tcp_ao_len_aligned(key->ao_key); ireq->tstamp_ok &= !ireq->sack_ok; } @@ -982,7 +982,7 @@ static unsigned int tcp_established_options(struct sock *sk, struct sk_buff *skb size += TCPOLEN_MD5SIG_ALIGNED; } else if (tcp_key_is_ao(key)) { opts->options |= OPTION_AO; - size += tcp_ao_len(key->ao_key); + size += tcp_ao_len_aligned(key->ao_key); } if (likely(tp->rx_opt.tstamp_ok)) { diff --git a/net/ipv6/tcp_ipv6.c b/net/ipv6/tcp_ipv6.c index 937a02c2e534..8c6623496dd7 100644 --- a/net/ipv6/tcp_ipv6.c +++ b/net/ipv6/tcp_ipv6.c @@ -881,7 +881,7 @@ static void tcp_v6_send_response(const struct sock *sk, struct sk_buff *skb, u32 if (tcp_key_is_md5(key)) tot_len += TCPOLEN_MD5SIG_ALIGNED; if (tcp_key_is_ao(key)) - tot_len += tcp_ao_len(key->ao_key); + tot_len += tcp_ao_len_aligned(key->ao_key); #ifdef CONFIG_MPTCP if (rst && !tcp_key_is_md5(key)) { -- cgit v1.2.3 From 965c00e4ea2e4df986ecd73c2fe9d3a00a2858db Mon Sep 17 00:00:00 2001 From: Dmitry Safonov Date: Mon, 4 Dec 2023 19:00:42 +0000 Subject: net/tcp: Limit TCP_AO_REPAIR to non-listen sockets Listen socket is not an established TCP connection, so setsockopt(TCP_AO_REPAIR) doesn't have any impact. Restrict this uAPI for listen sockets. Fixes: faadfaba5e01 ("net/tcp: Add TCP_AO_REPAIR") Signed-off-by: Dmitry Safonov Reviewed-by: Eric Dumazet Signed-off-by: Paolo Abeni --- net/ipv4/tcp.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c index c9f078224569..ff6838ca2e58 100644 --- a/net/ipv4/tcp.c +++ b/net/ipv4/tcp.c @@ -3610,6 +3610,10 @@ int do_tcp_setsockopt(struct sock *sk, int level, int optname, break; case TCP_AO_REPAIR: + if (!tcp_can_repair_sock(sk)) { + err = -EPERM; + break; + } err = tcp_ao_set_repair(sk, optval, optlen); break; #ifdef CONFIG_TCP_AO @@ -4309,6 +4313,8 @@ zerocopy_rcv_out: } #endif case TCP_AO_REPAIR: + if (!tcp_can_repair_sock(sk)) + return -EPERM; return tcp_ao_get_repair(sk, optval, optlen); case TCP_AO_GET_KEYS: case TCP_AO_INFO: { -- cgit v1.2.3 From 12083d728213285c2d4347fa0ed3b556449703ce Mon Sep 17 00:00:00 2001 From: Dmitry Safonov Date: Mon, 4 Dec 2023 19:00:43 +0000 Subject: net/tcp: Don't add key with non-matching VRF on connected sockets If the connection was established, don't allow adding TCP-AO keys that don't match the peer. Currently, there are checks for ip-address matching, but L3 index check is missing. Add it to restrict userspace shooting itself somewhere. Yet, nothing restricts the CAP_NET_RAW user from trying to shoot themselves by performing setsockopt(SO_BINDTODEVICE) or setsockopt(SO_BINDTOIFINDEX) over an established TCP-AO connection. So, this is just "minimum effort" to potentially save someone's debugging time, rather than a full restriction on doing weird things. Fixes: 248411b8cb89 ("net/tcp: Wire up l3index to TCP-AO") Signed-off-by: Dmitry Safonov Reviewed-by: Eric Dumazet Signed-off-by: Paolo Abeni --- net/ipv4/tcp_ao.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/net/ipv4/tcp_ao.c b/net/ipv4/tcp_ao.c index c8be1d526eac..18dacfef7a07 100644 --- a/net/ipv4/tcp_ao.c +++ b/net/ipv4/tcp_ao.c @@ -1608,6 +1608,15 @@ static int tcp_ao_add_cmd(struct sock *sk, unsigned short int family, if (!dev || !l3index) return -EINVAL; + if (!bound_dev_if || bound_dev_if != cmd.ifindex) { + /* tcp_ao_established_key() doesn't expect having + * non peer-matching key on an established TCP-AO + * connection. + */ + if (!((1 << sk->sk_state) & (TCPF_LISTEN | TCPF_CLOSE))) + return -EINVAL; + } + /* It's still possible to bind after adding keys or even * re-bind to a different dev (with CAP_NET_RAW). * So, no reason to return error here, rather try to be -- cgit v1.2.3 From 9396c4ee93f9ac03cd0cea0bb345fbc657772943 Mon Sep 17 00:00:00 2001 From: Dmitry Safonov Date: Mon, 4 Dec 2023 19:00:44 +0000 Subject: net/tcp: Don't store TCP-AO maclen on reqsk This extra check doesn't work for a handshake when SYN segment has (current_key.maclen != rnext_key.maclen). It could be amended to preserve rnext_key.maclen instead of current_key.maclen, but that requires a lookup on listen socket. Originally, this extra maclen check was introduced just because it was cheap. Drop it and convert tcp_request_sock::maclen into boolean tcp_request_sock::used_tcp_ao. Fixes: 06b22ef29591 ("net/tcp: Wire TCP-AO to request sockets") Signed-off-by: Dmitry Safonov Reviewed-by: Eric Dumazet Signed-off-by: Paolo Abeni --- include/linux/tcp.h | 8 ++------ net/ipv4/tcp_ao.c | 4 ++-- net/ipv4/tcp_input.c | 5 +++-- net/ipv4/tcp_output.c | 9 +++------ 4 files changed, 10 insertions(+), 16 deletions(-) diff --git a/include/linux/tcp.h b/include/linux/tcp.h index 68f3d315d2e1..b646b574b060 100644 --- a/include/linux/tcp.h +++ b/include/linux/tcp.h @@ -169,7 +169,7 @@ struct tcp_request_sock { #ifdef CONFIG_TCP_AO u8 ao_keyid; u8 ao_rcv_next; - u8 maclen; + bool used_tcp_ao; #endif }; @@ -180,14 +180,10 @@ static inline struct tcp_request_sock *tcp_rsk(const struct request_sock *req) static inline bool tcp_rsk_used_ao(const struct request_sock *req) { - /* The real length of MAC is saved in the request socket, - * signing anything with zero-length makes no sense, so here is - * a little hack.. - */ #ifndef CONFIG_TCP_AO return false; #else - return tcp_rsk(req)->maclen != 0; + return tcp_rsk(req)->used_tcp_ao; #endif } diff --git a/net/ipv4/tcp_ao.c b/net/ipv4/tcp_ao.c index 18dacfef7a07..f8308d3f565e 100644 --- a/net/ipv4/tcp_ao.c +++ b/net/ipv4/tcp_ao.c @@ -851,7 +851,7 @@ void tcp_ao_syncookie(struct sock *sk, const struct sk_buff *skb, const struct tcp_ao_hdr *aoh; struct tcp_ao_key *key; - treq->maclen = 0; + treq->used_tcp_ao = false; if (tcp_parse_auth_options(th, NULL, &aoh) || !aoh) return; @@ -863,7 +863,7 @@ void tcp_ao_syncookie(struct sock *sk, const struct sk_buff *skb, treq->ao_rcv_next = aoh->keyid; treq->ao_keyid = aoh->rnext_keyid; - treq->maclen = tcp_ao_maclen(key); + treq->used_tcp_ao = true; } static enum skb_drop_reason diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c index bcb55d98004c..337c8bb07ccc 100644 --- a/net/ipv4/tcp_input.c +++ b/net/ipv4/tcp_input.c @@ -7182,11 +7182,12 @@ int tcp_conn_request(struct request_sock_ops *rsk_ops, if (tcp_parse_auth_options(tcp_hdr(skb), NULL, &aoh)) goto drop_and_release; /* Invalid TCP options */ if (aoh) { - tcp_rsk(req)->maclen = aoh->length - sizeof(struct tcp_ao_hdr); + tcp_rsk(req)->used_tcp_ao = true; tcp_rsk(req)->ao_rcv_next = aoh->keyid; tcp_rsk(req)->ao_keyid = aoh->rnext_keyid; + } else { - tcp_rsk(req)->maclen = 0; + tcp_rsk(req)->used_tcp_ao = false; } #endif tcp_rsk(req)->snt_isn = isn; diff --git a/net/ipv4/tcp_output.c b/net/ipv4/tcp_output.c index 93eef1dbbc55..f5ef15e1d9ac 100644 --- a/net/ipv4/tcp_output.c +++ b/net/ipv4/tcp_output.c @@ -3720,7 +3720,6 @@ struct sk_buff *tcp_make_synack(const struct sock *sk, struct dst_entry *dst, if (tcp_rsk_used_ao(req)) { #ifdef CONFIG_TCP_AO struct tcp_ao_key *ao_key = NULL; - u8 maclen = tcp_rsk(req)->maclen; u8 keyid = tcp_rsk(req)->ao_keyid; ao_key = tcp_sk(sk)->af_specific->ao_lookup(sk, req_to_sk(req), @@ -3730,13 +3729,11 @@ struct sk_buff *tcp_make_synack(const struct sock *sk, struct dst_entry *dst, * for another peer-matching key, but the peer has requested * ao_keyid (RFC5925 RNextKeyID), so let's keep it simple here. */ - if (unlikely(!ao_key || tcp_ao_maclen(ao_key) != maclen)) { - u8 key_maclen = ao_key ? tcp_ao_maclen(ao_key) : 0; - + if (unlikely(!ao_key)) { rcu_read_unlock(); kfree_skb(skb); - net_warn_ratelimited("TCP-AO: the keyid %u with maclen %u|%u from SYN packet is not present - not sending SYNACK\n", - keyid, maclen, key_maclen); + net_warn_ratelimited("TCP-AO: the keyid %u from SYN packet is not present - not sending SYNACK\n", + keyid); return NULL; } key.ao_key = ao_key; -- cgit v1.2.3 From 82180b1fae2432ee88b4a54cc6c376ba01e57b22 Mon Sep 17 00:00:00 2001 From: Charlie Jenkins Date: Wed, 22 Nov 2023 15:35:54 -0800 Subject: Support rv32 ULEB128 test Use opcodes available to both rv32 and rv64 in uleb128 module linking test. Fixes: af71bc194916 ("riscv: Add tests for riscv module loading") Signed-off-by: Charlie Jenkins Reported-by: Randy Dunlap Closes: https://lore.kernel.org/lkml/1d7c71ee-5742-4df4-b8ef-a2aea0a624eb@infradead.org/ Tested-by: Randy Dunlap # build-tested Link: https://lore.kernel.org/r/20231122-module_fixup-v2-1-dfb9565e9ea5@rivosinc.com Signed-off-by: Palmer Dabbelt --- arch/riscv/kernel/tests/module_test/test_uleb128.S | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/riscv/kernel/tests/module_test/test_uleb128.S b/arch/riscv/kernel/tests/module_test/test_uleb128.S index 90f22049d553..8515ed7cd8c1 100644 --- a/arch/riscv/kernel/tests/module_test/test_uleb128.S +++ b/arch/riscv/kernel/tests/module_test/test_uleb128.S @@ -6,13 +6,13 @@ .text .global test_uleb_basic test_uleb_basic: - ld a0, second + lw a0, second addi a0, a0, -127 ret .global test_uleb_large test_uleb_large: - ld a0, fourth + lw a0, fourth addi a0, a0, -0x07e8 ret @@ -22,10 +22,10 @@ first: second: .reloc second, R_RISCV_SET_ULEB128, second .reloc second, R_RISCV_SUB_ULEB128, first - .dword 0 + .word 0 third: .space 1000 fourth: .reloc fourth, R_RISCV_SET_ULEB128, fourth .reloc fourth, R_RISCV_SUB_ULEB128, third - .dword 0 + .word 0 -- cgit v1.2.3 From dca6fa8644b89f54345e55501b1419316ba5cb29 Mon Sep 17 00:00:00 2001 From: Nithin Dabilpuram Date: Tue, 5 Dec 2023 13:34:30 +0530 Subject: octeontx2-af: Adjust Tx credits when MCS external bypass is disabled When MCS external bypass is disabled, MCS returns additional 2 credits(32B) for every packet Tx'ed on LMAC. To account for these extra credits, NIX_AF_TX_LINKX_NORM_CREDIT.CC_MCS_CNT needs to be configured as otherwise NIX Tx credits would overflow and will never be returned to idle state credit count causing issues with credit control and MTU change. This patch fixes the same by configuring CC_MCS_CNT at probe time for MCS enabled SoC's Fixes: bd69476e86fc ("octeontx2-af: cn10k: mcs: Install a default TCAM for normal traffic") Signed-off-by: Nithin Dabilpuram Signed-off-by: Geetha sowjanya Signed-off-by: Sunil Goutham Reviewed-by: Wojciech Drewek Signed-off-by: Paolo Abeni --- drivers/net/ethernet/marvell/octeontx2/af/mcs.c | 14 +++++++++++++- drivers/net/ethernet/marvell/octeontx2/af/mcs.h | 2 ++ drivers/net/ethernet/marvell/octeontx2/af/rvu.h | 1 + drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c | 8 ++++++++ drivers/net/ethernet/marvell/octeontx2/af/rvu_reg.h | 1 + 5 files changed, 25 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/marvell/octeontx2/af/mcs.c b/drivers/net/ethernet/marvell/octeontx2/af/mcs.c index c43f19dfbd74..bd87507cf8ea 100644 --- a/drivers/net/ethernet/marvell/octeontx2/af/mcs.c +++ b/drivers/net/ethernet/marvell/octeontx2/af/mcs.c @@ -1219,6 +1219,17 @@ struct mcs *mcs_get_pdata(int mcs_id) return NULL; } +bool is_mcs_bypass(int mcs_id) +{ + struct mcs *mcs_dev; + + list_for_each_entry(mcs_dev, &mcs_list, mcs_list) { + if (mcs_dev->mcs_id == mcs_id) + return mcs_dev->bypass; + } + return true; +} + void mcs_set_port_cfg(struct mcs *mcs, struct mcs_port_cfg_set_req *req) { u64 val = 0; @@ -1436,7 +1447,7 @@ static int mcs_x2p_calibration(struct mcs *mcs) return err; } -static void mcs_set_external_bypass(struct mcs *mcs, u8 bypass) +static void mcs_set_external_bypass(struct mcs *mcs, bool bypass) { u64 val; @@ -1447,6 +1458,7 @@ static void mcs_set_external_bypass(struct mcs *mcs, u8 bypass) else val &= ~BIT_ULL(6); mcs_reg_write(mcs, MCSX_MIL_GLOBAL, val); + mcs->bypass = bypass; } static void mcs_global_cfg(struct mcs *mcs) diff --git a/drivers/net/ethernet/marvell/octeontx2/af/mcs.h b/drivers/net/ethernet/marvell/octeontx2/af/mcs.h index 0f89dcb76465..f927cc61dfd2 100644 --- a/drivers/net/ethernet/marvell/octeontx2/af/mcs.h +++ b/drivers/net/ethernet/marvell/octeontx2/af/mcs.h @@ -149,6 +149,7 @@ struct mcs { u16 num_vec; void *rvu; u16 *tx_sa_active; + bool bypass; }; struct mcs_ops { @@ -206,6 +207,7 @@ void mcs_get_custom_tag_cfg(struct mcs *mcs, struct mcs_custom_tag_cfg_get_req * int mcs_alloc_ctrlpktrule(struct rsrc_bmap *rsrc, u16 *pf_map, u16 offset, u16 pcifunc); int mcs_free_ctrlpktrule(struct mcs *mcs, struct mcs_free_ctrl_pkt_rule_req *req); int mcs_ctrlpktrule_write(struct mcs *mcs, struct mcs_ctrl_pkt_rule_write_req *req); +bool is_mcs_bypass(int mcs_id); /* CN10K-B APIs */ void cn10kb_mcs_set_hw_capabilities(struct mcs *mcs); diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu.h b/drivers/net/ethernet/marvell/octeontx2/af/rvu.h index c4d999ef5ab4..cce2806aaa50 100644 --- a/drivers/net/ethernet/marvell/octeontx2/af/rvu.h +++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu.h @@ -345,6 +345,7 @@ struct nix_hw { struct nix_txvlan txvlan; struct nix_ipolicer *ipolicer; u64 *tx_credits; + u8 cc_mcs_cnt; }; /* RVU block's capabilities or functionality, diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c b/drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c index c112c71ff576..4227ebb4a758 100644 --- a/drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c +++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c @@ -12,6 +12,7 @@ #include "rvu_reg.h" #include "rvu.h" #include "npc.h" +#include "mcs.h" #include "cgx.h" #include "lmac_common.h" #include "rvu_npc_hash.h" @@ -4389,6 +4390,12 @@ static void nix_link_config(struct rvu *rvu, int blkaddr, SDP_HW_MAX_FRS << 16 | NIC_HW_MIN_FRS); } + /* Get MCS external bypass status for CN10K-B */ + if (mcs_get_blkcnt() == 1) { + /* Adjust for 2 credits when external bypass is disabled */ + nix_hw->cc_mcs_cnt = is_mcs_bypass(0) ? 0 : 2; + } + /* Set credits for Tx links assuming max packet length allowed. * This will be reconfigured based on MTU set for PF/VF. */ @@ -4412,6 +4419,7 @@ static void nix_link_config(struct rvu *rvu, int blkaddr, tx_credits = (lmac_fifo_len - lmac_max_frs) / 16; /* Enable credits and set credit pkt count to max allowed */ cfg = (tx_credits << 12) | (0x1FF << 2) | BIT_ULL(1); + cfg |= FIELD_PREP(NIX_AF_LINKX_MCS_CNT_MASK, nix_hw->cc_mcs_cnt); link = iter + slink; nix_hw->tx_credits[link] = tx_credits; diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu_reg.h b/drivers/net/ethernet/marvell/octeontx2/af/rvu_reg.h index b42e631e52d0..18c1c9f361cc 100644 --- a/drivers/net/ethernet/marvell/octeontx2/af/rvu_reg.h +++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu_reg.h @@ -437,6 +437,7 @@ #define NIX_AF_LINKX_BASE_MASK GENMASK_ULL(11, 0) #define NIX_AF_LINKX_RANGE_MASK GENMASK_ULL(19, 16) +#define NIX_AF_LINKX_MCS_CNT_MASK GENMASK_ULL(33, 32) /* SSO */ #define SSO_AF_CONST (0x1000) -- cgit v1.2.3 From 9723b2cca1f0e980c53156b52ea73b93966b3c8a Mon Sep 17 00:00:00 2001 From: Geetha sowjanya Date: Tue, 5 Dec 2023 13:34:31 +0530 Subject: octeontx2-af: Fix mcs sa cam entries size On latest silicon versions SA cam entries increased to 256. This patch fixes the datatype of sa_entries in mcs_hw_info struct to u16 to hold 256 entries. Fixes: 080bbd19c9dd ("octeontx2-af: cn10k: mcs: Add mailboxes for port related operations") Signed-off-by: Geetha sowjanya Reviewed-by: Wojciech Drewek Signed-off-by: Paolo Abeni --- drivers/net/ethernet/marvell/octeontx2/af/mbox.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/marvell/octeontx2/af/mbox.h b/drivers/net/ethernet/marvell/octeontx2/af/mbox.h index 6845556581c3..5df42634ceb8 100644 --- a/drivers/net/ethernet/marvell/octeontx2/af/mbox.h +++ b/drivers/net/ethernet/marvell/octeontx2/af/mbox.h @@ -1945,7 +1945,7 @@ struct mcs_hw_info { u8 tcam_entries; /* RX/TX Tcam entries per mcs block */ u8 secy_entries; /* RX/TX SECY entries per mcs block */ u8 sc_entries; /* RX/TX SC CAM entries per mcs block */ - u8 sa_entries; /* PN table entries = SA entries */ + u16 sa_entries; /* PN table entries = SA entries */ u64 rsvd[16]; }; -- cgit v1.2.3 From 3ba98a8c6f8ceb4e01a78f973d8d9017020bbd57 Mon Sep 17 00:00:00 2001 From: Geetha sowjanya Date: Tue, 5 Dec 2023 13:34:32 +0530 Subject: octeontx2-af: Fix mcs stats register address This patch adds the miss mcs stats register for mcs supported platforms. Fixes: 9312150af8da ("octeontx2-af: cn10k: mcs: Support for stats collection") Signed-off-by: Geetha sowjanya Reviewed-by: Wojciech Drewek Signed-off-by: Paolo Abeni --- drivers/net/ethernet/marvell/octeontx2/af/mcs.c | 4 +-- .../net/ethernet/marvell/octeontx2/af/mcs_reg.h | 31 +++++++++++++++++++--- 2 files changed, 29 insertions(+), 6 deletions(-) diff --git a/drivers/net/ethernet/marvell/octeontx2/af/mcs.c b/drivers/net/ethernet/marvell/octeontx2/af/mcs.c index bd87507cf8ea..c1775bd01c2b 100644 --- a/drivers/net/ethernet/marvell/octeontx2/af/mcs.c +++ b/drivers/net/ethernet/marvell/octeontx2/af/mcs.c @@ -117,7 +117,7 @@ void mcs_get_rx_secy_stats(struct mcs *mcs, struct mcs_secy_stats *stats, int id reg = MCSX_CSE_RX_MEM_SLAVE_INPKTSSECYTAGGEDCTLX(id); stats->pkt_tagged_ctl_cnt = mcs_reg_read(mcs, reg); - reg = MCSX_CSE_RX_MEM_SLAVE_INPKTSSECYUNTAGGEDORNOTAGX(id); + reg = MCSX_CSE_RX_MEM_SLAVE_INPKTSSECYUNTAGGEDX(id); stats->pkt_untaged_cnt = mcs_reg_read(mcs, reg); reg = MCSX_CSE_RX_MEM_SLAVE_INPKTSSECYCTLX(id); @@ -215,7 +215,7 @@ void mcs_get_sc_stats(struct mcs *mcs, struct mcs_sc_stats *stats, reg = MCSX_CSE_RX_MEM_SLAVE_INPKTSSCNOTVALIDX(id); stats->pkt_notvalid_cnt = mcs_reg_read(mcs, reg); - reg = MCSX_CSE_RX_MEM_SLAVE_INPKTSSCUNCHECKEDOROKX(id); + reg = MCSX_CSE_RX_MEM_SLAVE_INPKTSSCUNCHECKEDX(id); stats->pkt_unchecked_cnt = mcs_reg_read(mcs, reg); if (mcs->hw->mcs_blks > 1) { diff --git a/drivers/net/ethernet/marvell/octeontx2/af/mcs_reg.h b/drivers/net/ethernet/marvell/octeontx2/af/mcs_reg.h index f3ab01fc363c..f4c6de89002c 100644 --- a/drivers/net/ethernet/marvell/octeontx2/af/mcs_reg.h +++ b/drivers/net/ethernet/marvell/octeontx2/af/mcs_reg.h @@ -810,14 +810,37 @@ offset = 0x9d8ull; \ offset; }) +#define MCSX_CSE_RX_MEM_SLAVE_INPKTSSCUNCHECKEDX(a) ({ \ + u64 offset; \ + \ + offset = 0xee80ull; \ + if (mcs->hw->mcs_blks > 1) \ + offset = 0xe818ull; \ + offset += (a) * 0x8ull; \ + offset; }) + +#define MCSX_CSE_RX_MEM_SLAVE_INPKTSSECYUNTAGGEDX(a) ({ \ + u64 offset; \ + \ + offset = 0xa680ull; \ + if (mcs->hw->mcs_blks > 1) \ + offset = 0xd018ull; \ + offset += (a) * 0x8ull; \ + offset; }) + +#define MCSX_CSE_RX_MEM_SLAVE_INPKTSSCLATEORDELAYEDX(a) ({ \ + u64 offset; \ + \ + offset = 0xf680ull; \ + if (mcs->hw->mcs_blks > 1) \ + offset = 0xe018ull; \ + offset += (a) * 0x8ull; \ + offset; }) + #define MCSX_CSE_RX_MEM_SLAVE_INOCTETSSCDECRYPTEDX(a) (0xe680ull + (a) * 0x8ull) #define MCSX_CSE_RX_MEM_SLAVE_INOCTETSSCVALIDATEX(a) (0xde80ull + (a) * 0x8ull) -#define MCSX_CSE_RX_MEM_SLAVE_INPKTSSECYUNTAGGEDORNOTAGX(a) (0xa680ull + (a) * 0x8ull) #define MCSX_CSE_RX_MEM_SLAVE_INPKTSSECYNOTAGX(a) (0xd218 + (a) * 0x8ull) -#define MCSX_CSE_RX_MEM_SLAVE_INPKTSSECYUNTAGGEDX(a) (0xd018ull + (a) * 0x8ull) -#define MCSX_CSE_RX_MEM_SLAVE_INPKTSSCUNCHECKEDOROKX(a) (0xee80ull + (a) * 0x8ull) #define MCSX_CSE_RX_MEM_SLAVE_INPKTSSECYCTLX(a) (0xb680ull + (a) * 0x8ull) -#define MCSX_CSE_RX_MEM_SLAVE_INPKTSSCLATEORDELAYEDX(a) (0xf680ull + (a) * 0x8ull) #define MCSX_CSE_RX_MEM_SLAVE_INPKTSSAINVALIDX(a) (0x12680ull + (a) * 0x8ull) #define MCSX_CSE_RX_MEM_SLAVE_INPKTSSANOTUSINGSAERRORX(a) (0x15680ull + (a) * 0x8ull) #define MCSX_CSE_RX_MEM_SLAVE_INPKTSSANOTVALIDX(a) (0x13680ull + (a) * 0x8ull) -- cgit v1.2.3 From d431abd0a9aa27be379fb5f8304062071b0f5a7e Mon Sep 17 00:00:00 2001 From: Geetha sowjanya Date: Tue, 5 Dec 2023 13:34:33 +0530 Subject: octeontx2-af: Add missing mcs flr handler call If mcs resources are attached to PF/VF. These resources need to be freed on FLR. This patch add missing mcs flr call on PF FLR. Fixes: bd69476e86fc ("octeontx2-af: cn10k: mcs: Install a default TCAM for normal traffic") Signed-off-by: Geetha sowjanya Reviewed-by: Wojciech Drewek Signed-off-by: Paolo Abeni --- drivers/net/ethernet/marvell/octeontx2/af/rvu.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu.c b/drivers/net/ethernet/marvell/octeontx2/af/rvu.c index 22c395c7d040..731bb82b577c 100644 --- a/drivers/net/ethernet/marvell/octeontx2/af/rvu.c +++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu.c @@ -2631,6 +2631,9 @@ static void __rvu_flr_handler(struct rvu *rvu, u16 pcifunc) rvu_npc_free_mcam_entries(rvu, pcifunc, -1); rvu_mac_reset(rvu, pcifunc); + if (rvu->mcs_blk_cnt) + rvu_mcs_flr_handler(rvu, pcifunc); + mutex_unlock(&rvu->flr_lock); } -- cgit v1.2.3 From 7336fc196748f82646b630d5a2e9d283e200b988 Mon Sep 17 00:00:00 2001 From: Rahul Bhansali Date: Tue, 5 Dec 2023 13:34:34 +0530 Subject: octeontx2-af: Update Tx link register range On new silicons the TX channels for transmit level has increased. This patch fixes the respective register offset range to configure the newly added channels. Fixes: b279bbb3314e ("octeontx2-af: NIX Tx scheduler queue config support") Signed-off-by: Rahul Bhansali Signed-off-by: Geetha sowjanya Reviewed-by: Wojciech Drewek Signed-off-by: Paolo Abeni --- drivers/net/ethernet/marvell/octeontx2/af/rvu_reg.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu_reg.c b/drivers/net/ethernet/marvell/octeontx2/af/rvu_reg.c index b3150f053291..d46ac29adb96 100644 --- a/drivers/net/ethernet/marvell/octeontx2/af/rvu_reg.c +++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu_reg.c @@ -31,8 +31,8 @@ static struct hw_reg_map txsch_reg_map[NIX_TXSCH_LVL_CNT] = { {NIX_TXSCH_LVL_TL4, 3, 0xFFFF, {{0x0B00, 0x0B08}, {0x0B10, 0x0B18}, {0x1200, 0x12E0} } }, {NIX_TXSCH_LVL_TL3, 4, 0xFFFF, {{0x1000, 0x10E0}, {0x1600, 0x1608}, - {0x1610, 0x1618}, {0x1700, 0x17B0} } }, - {NIX_TXSCH_LVL_TL2, 2, 0xFFFF, {{0x0E00, 0x0EE0}, {0x1700, 0x17B0} } }, + {0x1610, 0x1618}, {0x1700, 0x17C8} } }, + {NIX_TXSCH_LVL_TL2, 2, 0xFFFF, {{0x0E00, 0x0EE0}, {0x1700, 0x17C8} } }, {NIX_TXSCH_LVL_TL1, 1, 0xFFFF, {{0x0C00, 0x0D98} } }, }; -- cgit v1.2.3 From 777c0d761be7d981a2ae5494dfbc636311908dfb Mon Sep 17 00:00:00 2001 From: Andrew Jones Date: Wed, 1 Nov 2023 15:19:09 +0100 Subject: RISC-V: hwprobe: Always use u64 for extension bits Extensions are getting added quickly and their hwprobe bits will soon exceed 31 (which pair values accommodate, since they're of type u64). However, in one tree, where a bunch of extensions got merged prior to zicboz, zicboz already got pushed to bit 32. Pushing it exposed a 32-bit compilation bug, since unsigned long was used instead of u64. Reported-by: kernel test robot Closes: https://lore.kernel.org/oe-kbuild-all/202310311801.hxduISrr-lkp@intel.com/ Fixes: 9c7646d5ffd2 ("RISC-V: hwprobe: Expose Zicboz extension and its block size") Signed-off-by: Andrew Jones Link: https://lore.kernel.org/r/20231101141908.192198-2-ajones@ventanamicro.com Signed-off-by: Palmer Dabbelt --- arch/riscv/kernel/sys_riscv.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/riscv/kernel/sys_riscv.c b/arch/riscv/kernel/sys_riscv.c index c712037dbe10..a2ca5b7756a5 100644 --- a/arch/riscv/kernel/sys_riscv.c +++ b/arch/riscv/kernel/sys_riscv.c @@ -169,7 +169,7 @@ static void hwprobe_isa_ext0(struct riscv_hwprobe *pair, pair->value &= ~missing; } -static bool hwprobe_ext0_has(const struct cpumask *cpus, unsigned long ext) +static bool hwprobe_ext0_has(const struct cpumask *cpus, u64 ext) { struct riscv_hwprobe pair; -- cgit v1.2.3 From c0a2755aced969e0125fd68ccd95269b28d8913a Mon Sep 17 00:00:00 2001 From: Konrad Dybcio Date: Wed, 29 Nov 2023 20:12:31 +0100 Subject: dt-bindings: interrupt-controller: Allow #power-domain-cells MPM provides a single genpd. Allow #power-domain-cells = <0>. Fixes: 54fc9851c0e0 ("dt-bindings: interrupt-controller: Add Qualcomm MPM support") Acked-by: Shawn Guo Acked-by: Krzysztof Kozlowski Signed-off-by: Konrad Dybcio Link: https://lore.kernel.org/r/20231129-topic-mpmbindingspd-v2-1-acbe909ceee1@linaro.org Signed-off-by: Rob Herring --- Documentation/devicetree/bindings/interrupt-controller/qcom,mpm.yaml | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/Documentation/devicetree/bindings/interrupt-controller/qcom,mpm.yaml b/Documentation/devicetree/bindings/interrupt-controller/qcom,mpm.yaml index 509d20c091af..6a206111d4e0 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/qcom,mpm.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/qcom,mpm.yaml @@ -62,6 +62,9 @@ properties: - description: MPM pin number - description: GIC SPI number for the MPM pin + '#power-domain-cells': + const: 0 + required: - compatible - reg @@ -93,4 +96,5 @@ examples: <86 183>, <90 260>, <91 260>; + #power-domain-cells = <0>; }; -- cgit v1.2.3 From 22e0eb04837a63af111fae35a92f7577676b9bc8 Mon Sep 17 00:00:00 2001 From: Clément Léger Date: Fri, 3 Nov 2023 10:02:23 +0100 Subject: riscv: fix misaligned access handling of C.SWSP and C.SDSP MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This is a backport of a fix that was done in OpenSBI: ec0559eb315b ("lib: sbi_misaligned_ldst: Fix handling of C.SWSP and C.SDSP"). Unlike C.LWSP/C.LDSP, these encodings can be used with the zero register, so checking that the rs2 field is non-zero is unnecessary. Additionally, the previous check was incorrect since it was checking the immediate field of the instruction instead of the rs2 field. Fixes: 956d705dd279 ("riscv: Unaligned load/store handling for M_MODE") Signed-off-by: Clément Léger Link: https://lore.kernel.org/r/20231103090223.702340-1-cleger@rivosinc.com Signed-off-by: Palmer Dabbelt --- arch/riscv/kernel/traps_misaligned.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/arch/riscv/kernel/traps_misaligned.c b/arch/riscv/kernel/traps_misaligned.c index 5eba37147caa..5255f8134aef 100644 --- a/arch/riscv/kernel/traps_misaligned.c +++ b/arch/riscv/kernel/traps_misaligned.c @@ -550,16 +550,14 @@ int handle_misaligned_store(struct pt_regs *regs) } else if ((insn & INSN_MASK_C_SD) == INSN_MATCH_C_SD) { len = 8; val.data_ulong = GET_RS2S(insn, regs); - } else if ((insn & INSN_MASK_C_SDSP) == INSN_MATCH_C_SDSP && - ((insn >> SH_RD) & 0x1f)) { + } else if ((insn & INSN_MASK_C_SDSP) == INSN_MATCH_C_SDSP) { len = 8; val.data_ulong = GET_RS2C(insn, regs); #endif } else if ((insn & INSN_MASK_C_SW) == INSN_MATCH_C_SW) { len = 4; val.data_ulong = GET_RS2S(insn, regs); - } else if ((insn & INSN_MASK_C_SWSP) == INSN_MATCH_C_SWSP && - ((insn >> SH_RD) & 0x1f)) { + } else if ((insn & INSN_MASK_C_SWSP) == INSN_MATCH_C_SWSP) { len = 4; val.data_ulong = GET_RS2C(insn, regs); } else if ((insn & INSN_MASK_C_FSD) == INSN_MATCH_C_FSD) { -- cgit v1.2.3 From 33038efb64f7576bac635164021f5c984d4c755f Mon Sep 17 00:00:00 2001 From: Tim Bosse Date: Wed, 6 Dec 2023 09:26:29 -0500 Subject: ALSA: hda/realtek: add new Framework laptop to quirks The Framework Laptop 13 (AMD Ryzen 7040Series) has an ALC295 with a disconnected or faulty headset mic presence detect similar to the previous models. It works with the same quirk chain as 309d7363ca3d9fcdb92ff2d958be14d7e8707f68. This model has a VID:PID of f111:0006. Signed-off-by: Tim Bosse Cc: Link: https://lore.kernel.org/r/20231206142629.388615-1-flinn@timbos.se Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index d799d0ad7623..51e1bfd7bdde 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -10273,6 +10273,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x8086, 0x2081, "Intel NUC 10", ALC256_FIXUP_INTEL_NUC10), SND_PCI_QUIRK(0x8086, 0x3038, "Intel NUC 13", ALC295_FIXUP_CHROME_BOOK), SND_PCI_QUIRK(0xf111, 0x0001, "Framework Laptop", ALC295_FIXUP_FRAMEWORK_LAPTOP_MIC_NO_PRESENCE), + SND_PCI_QUIRK(0xf111, 0x0006, "Framework Laptop", ALC295_FIXUP_FRAMEWORK_LAPTOP_MIC_NO_PRESENCE), #if 0 /* Below is a quirk table taken from the old code. -- cgit v1.2.3 From 96ba4a47d147cf8c4b764ec3a66a088a5bb3033a Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Wed, 22 Nov 2023 15:44:14 -0700 Subject: dt-bindings: perf: riscv,pmu: drop unneeded quotes Drop unneeded quotes over simple string values to fix a soon to be enabled yamllint warning: [error] string value is redundantly quoted with any quotes (quoted-strings) Signed-off-by: Rob Herring Reviewed-by: Krzysztof Kozlowski Acked-by: Conor Dooley Link: https://lore.kernel.org/r/20231122224414.2809184-1-robh@kernel.org Signed-off-by: Palmer Dabbelt --- Documentation/devicetree/bindings/perf/riscv,pmu.yaml | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/perf/riscv,pmu.yaml b/Documentation/devicetree/bindings/perf/riscv,pmu.yaml index c8448de2f2a0..d01c677ad3c7 100644 --- a/Documentation/devicetree/bindings/perf/riscv,pmu.yaml +++ b/Documentation/devicetree/bindings/perf/riscv,pmu.yaml @@ -90,7 +90,7 @@ properties: bitmap of all MHPMCOUNTERx that can monitor the range of events dependencies: - "riscv,event-to-mhpmevent": [ "riscv,event-to-mhpmcounters" ] + riscv,event-to-mhpmevent: [ "riscv,event-to-mhpmcounters" ] required: - compatible -- cgit v1.2.3 From f40cab8e18ed57d2c7b5213437d83d955f78097f Mon Sep 17 00:00:00 2001 From: Samuel Holland Date: Tue, 21 Nov 2023 13:19:29 -0800 Subject: riscv: Fix SMP when shadow call stacks are enabled This fixes two bugs in SCS initialization for secondary CPUs. First, the SCS was not initialized at all in the spinwait boot path. Second, the code for the SBI HSM path attempted to initialize the SCS before enabling the MMU. However, that involves dereferencing the thread pointer, which requires the MMU to be enabled. Fix both issues by setting up the SCS in the common secondary entry path, after enabling the MMU. Fixes: d1584d791a29 ("riscv: Implement Shadow Call Stack") Signed-off-by: Samuel Holland Reviewed-by: Sami Tolvanen Link: https://lore.kernel.org/r/20231121211958.3158576-1-samuel.holland@sifive.com Signed-off-by: Palmer Dabbelt --- arch/riscv/kernel/head.S | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/riscv/kernel/head.S b/arch/riscv/kernel/head.S index b77397432403..76ace1e0b46f 100644 --- a/arch/riscv/kernel/head.S +++ b/arch/riscv/kernel/head.S @@ -154,7 +154,6 @@ secondary_start_sbi: XIP_FIXUP_OFFSET a3 add a3, a3, a1 REG_L sp, (a3) - scs_load_current .Lsecondary_start_common: @@ -165,6 +164,7 @@ secondary_start_sbi: call relocate_enable_mmu #endif call .Lsetup_trap_vector + scs_load_current tail smp_callin #endif /* CONFIG_SMP */ -- cgit v1.2.3 From ed5b7cfd7839f9280a63365c1133482b42d0981f Mon Sep 17 00:00:00 2001 From: Lad Prabhakar Date: Thu, 30 Nov 2023 21:26:47 +0000 Subject: riscv: errata: andes: Probe for IOCP only once in boot stage MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit We need to probe for IOCP only once during boot stage, as we were probing for IOCP for all the stages this caused the below issue during module-init stage, [9.019104] Unable to handle kernel paging request at virtual address ffffffff8100d3a0 [9.027153] Oops [#1] [9.029421] Modules linked in: rcar_canfd renesas_usbhs i2c_riic can_dev spi_rspi i2c_core [9.037686] CPU: 0 PID: 90 Comm: udevd Not tainted 6.7.0-rc1+ #57 [9.043756] Hardware name: Renesas SMARC EVK based on r9a07g043f01 (DT) [9.050339] epc : riscv_noncoherent_supported+0x10/0x3e [9.055558]  ra : andes_errata_patch_func+0x4a/0x52 [9.060418] epc : ffffffff8000d8c2 ra : ffffffff8000d95c sp : ffffffc8003abb00 [9.067607]  gp : ffffffff814e25a0 tp : ffffffd80361e540 t0 : 0000000000000000 [9.074795]  t1 : 000000000900031e t2 : 0000000000000001 s0 : ffffffc8003abb20 [9.081984]  s1 : ffffffff015b57c7 a0 : 0000000000000000 a1 : 0000000000000001 [9.089172]  a2 : 0000000000000000 a3 : 0000000000000000 a4 : ffffffff8100d8be [9.096360]  a5 : 0000000000000001 a6 : 0000000000000001 a7 : 000000000900031e [9.103548]  s2 : ffffffff015b57d7 s3 : 0000000000000001 s4 : 000000000000031e [9.110736]  s5 : 8000000000008a45 s6 : 0000000000000500 s7 : 000000000000003f [9.117924]  s8 : ffffffc8003abd48 s9 : ffffffff015b1140 s10: ffffffff8151a1b0 [9.125113]  s11: ffffffff015b1000 t3 : 0000000000000001 t4 : fefefefefefefeff [9.132301]  t5 : ffffffff015b57c7 t6 : ffffffd8b63a6000 [9.137587] status: 0000000200000120 badaddr: ffffffff8100d3a0 cause: 000000000000000f [9.145468] [] riscv_noncoherent_supported+0x10/0x3e [9.151972] [] _apply_alternatives+0x84/0x86 [9.157784] [] apply_module_alternatives+0x10/0x1a [9.164113] [] module_finalize+0x5e/0x7a [9.169583] [] load_module+0xfd8/0x179c [9.174965] [] init_module_from_file+0x76/0xaa [9.180948] [] __riscv_sys_finit_module+0x176/0x2a8 [9.187365] [] do_trap_ecall_u+0xbe/0x130 [9.192922] [] ret_from_exception+0x0/0x64 [9.198573] Code: 0009 b7e9 6797 014d a783 85a7 c799 4785 0717 0100 (0123) aef7 [9.205994] ---[ end trace 0000000000000000 ]--- This is because we called riscv_noncoherent_supported() for all the stages during IOCP probe. riscv_noncoherent_supported() function sets noncoherent_supported variable to true which has an annotation set to "__ro_after_init" due to which we were seeing the above splat. Fix this by probing for IOCP only once in boot stage by having a boolean variable "done" which will be set to true upon IOCP probe in errata_probe_iocp() and we bail out early if "done" is set to true. While at it make return type of errata_probe_iocp() to void as we were not checking the return value in andes_errata_patch_func(). Fixes: e021ae7f5145 ("riscv: errata: Add Andes alternative ports") Signed-off-by: Lad Prabhakar Reviewed-by: Geert Uytterhoeven Reviewed-by: Yu Chien Peter Lin Link: https://lore.kernel.org/r/20231130212647.108746-1-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Palmer Dabbelt --- arch/riscv/errata/andes/errata.c | 20 +++++++++++++------- 1 file changed, 13 insertions(+), 7 deletions(-) diff --git a/arch/riscv/errata/andes/errata.c b/arch/riscv/errata/andes/errata.c index 197db68cc8da..17a904869724 100644 --- a/arch/riscv/errata/andes/errata.c +++ b/arch/riscv/errata/andes/errata.c @@ -38,29 +38,35 @@ static long ax45mp_iocp_sw_workaround(void) return ret.error ? 0 : ret.value; } -static bool errata_probe_iocp(unsigned int stage, unsigned long arch_id, unsigned long impid) +static void errata_probe_iocp(unsigned int stage, unsigned long arch_id, unsigned long impid) { + static bool done; + if (!IS_ENABLED(CONFIG_ERRATA_ANDES_CMO)) - return false; + return; + + if (done) + return; + + done = true; if (arch_id != ANDESTECH_AX45MP_MARCHID || impid != ANDESTECH_AX45MP_MIMPID) - return false; + return; if (!ax45mp_iocp_sw_workaround()) - return false; + return; /* Set this just to make core cbo code happy */ riscv_cbom_block_size = 1; riscv_noncoherent_supported(); - - return true; } void __init_or_module andes_errata_patch_func(struct alt_entry *begin, struct alt_entry *end, unsigned long archid, unsigned long impid, unsigned int stage) { - errata_probe_iocp(stage, archid, impid); + if (stage == RISCV_ALTERNATIVES_BOOT) + errata_probe_iocp(stage, archid, impid); /* we have nothing to patch here ATM so just return back */ } -- cgit v1.2.3 From fe2b1226656afae56702d1d84c6900f6b67df297 Mon Sep 17 00:00:00 2001 From: Heiner Kallweit Date: Fri, 1 Dec 2023 11:23:22 +0100 Subject: leds: trigger: netdev: fix RTNL handling to prevent potential deadlock When working on LED support for r8169 I got the following lockdep warning. Easiest way to prevent this scenario seems to be to take the RTNL lock before the trigger_data lock in set_device_name(). ====================================================== WARNING: possible circular locking dependency detected 6.7.0-rc2-next-20231124+ #2 Not tainted ------------------------------------------------------ bash/383 is trying to acquire lock: ffff888103aa1c68 (&trigger_data->lock){+.+.}-{3:3}, at: netdev_trig_notify+0xec/0x190 [ledtrig_netdev] but task is already holding lock: ffffffff8cddf808 (rtnl_mutex){+.+.}-{3:3}, at: rtnl_lock+0x12/0x20 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (rtnl_mutex){+.+.}-{3:3}: __mutex_lock+0x9b/0xb50 mutex_lock_nested+0x16/0x20 rtnl_lock+0x12/0x20 set_device_name+0xa9/0x120 [ledtrig_netdev] netdev_trig_activate+0x1a1/0x230 [ledtrig_netdev] led_trigger_set+0x172/0x2c0 led_trigger_write+0xf1/0x140 sysfs_kf_bin_write+0x5d/0x80 kernfs_fop_write_iter+0x15d/0x210 vfs_write+0x1f0/0x510 ksys_write+0x6c/0xf0 __x64_sys_write+0x14/0x20 do_syscall_64+0x3f/0xf0 entry_SYSCALL_64_after_hwframe+0x6c/0x74 -> #0 (&trigger_data->lock){+.+.}-{3:3}: __lock_acquire+0x1459/0x25a0 lock_acquire+0xc8/0x2d0 __mutex_lock+0x9b/0xb50 mutex_lock_nested+0x16/0x20 netdev_trig_notify+0xec/0x190 [ledtrig_netdev] call_netdevice_register_net_notifiers+0x5a/0x100 register_netdevice_notifier+0x85/0x120 netdev_trig_activate+0x1d4/0x230 [ledtrig_netdev] led_trigger_set+0x172/0x2c0 led_trigger_write+0xf1/0x140 sysfs_kf_bin_write+0x5d/0x80 kernfs_fop_write_iter+0x15d/0x210 vfs_write+0x1f0/0x510 ksys_write+0x6c/0xf0 __x64_sys_write+0x14/0x20 do_syscall_64+0x3f/0xf0 entry_SYSCALL_64_after_hwframe+0x6c/0x74 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(rtnl_mutex); lock(&trigger_data->lock); lock(rtnl_mutex); lock(&trigger_data->lock); *** DEADLOCK *** 8 locks held by bash/383: #0: ffff888103ff33f0 (sb_writers#3){.+.+}-{0:0}, at: ksys_write+0x6c/0xf0 #1: ffff888103aa1e88 (&of->mutex){+.+.}-{3:3}, at: kernfs_fop_write_iter+0x114/0x210 #2: ffff8881036f1890 (kn->active#82){.+.+}-{0:0}, at: kernfs_fop_write_iter+0x11d/0x210 #3: ffff888108e2c358 (&led_cdev->led_access){+.+.}-{3:3}, at: led_trigger_write+0x30/0x140 #4: ffffffff8cdd9e10 (triggers_list_lock){++++}-{3:3}, at: led_trigger_write+0x75/0x140 #5: ffff888108e2c270 (&led_cdev->trigger_lock){++++}-{3:3}, at: led_trigger_write+0xe3/0x140 #6: ffffffff8cdde3d0 (pernet_ops_rwsem){++++}-{3:3}, at: register_netdevice_notifier+0x1c/0x120 #7: ffffffff8cddf808 (rtnl_mutex){+.+.}-{3:3}, at: rtnl_lock+0x12/0x20 stack backtrace: CPU: 0 PID: 383 Comm: bash Not tainted 6.7.0-rc2-next-20231124+ #2 Hardware name: Default string Default string/Default string, BIOS ADLN.M6.SODIMM.ZB.CY.015 08/08/2023 Call Trace: dump_stack_lvl+0x5c/0xd0 dump_stack+0x10/0x20 print_circular_bug+0x2dd/0x410 check_noncircular+0x131/0x150 __lock_acquire+0x1459/0x25a0 lock_acquire+0xc8/0x2d0 ? netdev_trig_notify+0xec/0x190 [ledtrig_netdev] __mutex_lock+0x9b/0xb50 ? netdev_trig_notify+0xec/0x190 [ledtrig_netdev] ? __this_cpu_preempt_check+0x13/0x20 ? netdev_trig_notify+0xec/0x190 [ledtrig_netdev] ? __cancel_work_timer+0x11c/0x1b0 ? __mutex_lock+0x123/0xb50 mutex_lock_nested+0x16/0x20 ? mutex_lock_nested+0x16/0x20 netdev_trig_notify+0xec/0x190 [ledtrig_netdev] call_netdevice_register_net_notifiers+0x5a/0x100 register_netdevice_notifier+0x85/0x120 netdev_trig_activate+0x1d4/0x230 [ledtrig_netdev] led_trigger_set+0x172/0x2c0 ? preempt_count_add+0x49/0xc0 led_trigger_write+0xf1/0x140 sysfs_kf_bin_write+0x5d/0x80 kernfs_fop_write_iter+0x15d/0x210 vfs_write+0x1f0/0x510 ksys_write+0x6c/0xf0 __x64_sys_write+0x14/0x20 do_syscall_64+0x3f/0xf0 entry_SYSCALL_64_after_hwframe+0x6c/0x74 RIP: 0033:0x7f269055d034 Code: c7 00 16 00 00 00 b8 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 f3 0f 1e fa 80 3d 35 c3 0d 00 00 74 13 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 c3 0f 1f 00 48 83 ec 28 48 89 54 24 18 48 RSP: 002b:00007ffddb7ef748 EFLAGS: 00000202 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000000007 RCX: 00007f269055d034 RDX: 0000000000000007 RSI: 000055bf5f4af3c0 RDI: 0000000000000001 RBP: 000055bf5f4af3c0 R08: 0000000000000073 R09: 0000000000000001 R10: 0000000000000000 R11: 0000000000000202 R12: 0000000000000007 R13: 00007f26906325c0 R14: 00007f269062ff20 R15: 0000000000000000 Fixes: d5e01266e7f5 ("leds: trigger: netdev: add additional specific link speed mode") Cc: stable@vger.kernel.org Signed-off-by: Heiner Kallweit Reviewed-by: Andrew Lunn Acked-by: Lee Jones Link: https://lore.kernel.org/r/fb5c8294-2a10-4bf5-8f10-3d2b77d2757e@gmail.com Signed-off-by: Jakub Kicinski --- drivers/leds/trigger/ledtrig-netdev.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) diff --git a/drivers/leds/trigger/ledtrig-netdev.c b/drivers/leds/trigger/ledtrig-netdev.c index e358e77e4b38..d76214fa9ad8 100644 --- a/drivers/leds/trigger/ledtrig-netdev.c +++ b/drivers/leds/trigger/ledtrig-netdev.c @@ -226,6 +226,11 @@ static int set_device_name(struct led_netdev_data *trigger_data, cancel_delayed_work_sync(&trigger_data->work); + /* + * Take RTNL lock before trigger_data lock to prevent potential + * deadlock with netdev notifier registration. + */ + rtnl_lock(); mutex_lock(&trigger_data->lock); if (trigger_data->net_dev) { @@ -245,16 +250,14 @@ static int set_device_name(struct led_netdev_data *trigger_data, trigger_data->carrier_link_up = false; trigger_data->link_speed = SPEED_UNKNOWN; trigger_data->duplex = DUPLEX_UNKNOWN; - if (trigger_data->net_dev != NULL) { - rtnl_lock(); + if (trigger_data->net_dev) get_device_state(trigger_data); - rtnl_unlock(); - } trigger_data->last_activity = 0; set_baseline_state(trigger_data); mutex_unlock(&trigger_data->lock); + rtnl_unlock(); return 0; } -- cgit v1.2.3 From 94ea0ed356b45fa2d5d0c08d5495471bde29a1e5 Mon Sep 17 00:00:00 2001 From: Chester Lin Date: Thu, 16 Nov 2023 07:45:08 +0800 Subject: MAINTAINERS: change the S32G2 maintainer's email address. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit I am leaving SUSE so the current email address will be disabled soon. will be my new address for handling emails, patches and pull requests from upstream and communities. Cc: Chester Lin Cc: NXP S32 Linux Team Cc: Arnd Bergmann Cc: Olof Johansson Cc: Andreas Färber Cc: Matthias Brugger Signed-off-by: Chester Lin Reviewed-by: Matthias Brugger Link: https://lore.kernel.org/r/20231115234508.11510-1-clin@suse.com Signed-off-by: Arnd Bergmann --- MAINTAINERS | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index 012df8ccf34e..f78d2b96af01 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2535,7 +2535,7 @@ F: drivers/*/*/*wpcm* F: drivers/*/*wpcm* ARM/NXP S32G ARCHITECTURE -M: Chester Lin +M: Chester Lin R: Andreas Färber R: Matthias Brugger R: NXP S32 Linux Team -- cgit v1.2.3 From 1834d62ae88500f37cba4439c3237aa85242272e Mon Sep 17 00:00:00 2001 From: "D. Wythe" Date: Thu, 30 Nov 2023 15:23:23 +0800 Subject: netfilter: bpf: fix bad registration on nf_defrag We should pass a pointer to global_hook to the get_proto_defrag_hook() instead of its value, since the passed value won't be updated even if the request module was loaded successfully. Log: [ 54.915713] nf_defrag_ipv4 has bad registration [ 54.915779] WARNING: CPU: 3 PID: 6323 at net/netfilter/nf_bpf_link.c:62 get_proto_defrag_hook+0x137/0x160 [ 54.915835] CPU: 3 PID: 6323 Comm: fentry Kdump: loaded Tainted: G E 6.7.0-rc2+ #35 [ 54.915839] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.15.0-0-g2dd4b9b3f840-prebuilt.qemu.org 04/01/2014 [ 54.915841] RIP: 0010:get_proto_defrag_hook+0x137/0x160 [ 54.915844] Code: 4f 8c e8 2c cf 68 ff 80 3d db 83 9a 01 00 0f 85 74 ff ff ff 48 89 ee 48 c7 c7 8f 12 4f 8c c6 05 c4 83 9a 01 01 e8 09 ee 5f ff <0f> 0b e9 57 ff ff ff 49 8b 3c 24 4c 63 e5 e8 36 28 6c ff 4c 89 e0 [ 54.915849] RSP: 0018:ffffb676003fbdb0 EFLAGS: 00010286 [ 54.915852] RAX: 0000000000000023 RBX: ffff9596503d5600 RCX: ffff95996fce08c8 [ 54.915854] RDX: 00000000ffffffd8 RSI: 0000000000000027 RDI: ffff95996fce08c0 [ 54.915855] RBP: ffffffff8c4f12de R08: 0000000000000000 R09: 00000000fffeffff [ 54.915859] R10: ffffb676003fbc70 R11: ffffffff8d363ae8 R12: 0000000000000000 [ 54.915861] R13: ffffffff8e1f75c0 R14: ffffb676003c9000 R15: 00007ffd15e78ef0 [ 54.915864] FS: 00007fb6e9cab740(0000) GS:ffff95996fcc0000(0000) knlGS:0000000000000000 [ 54.915867] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 54.915868] CR2: 00007ffd15e75c40 CR3: 0000000101e62006 CR4: 0000000000360ef0 [ 54.915870] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 54.915871] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 54.915873] Call Trace: [ 54.915891] [ 54.915894] ? __warn+0x84/0x140 [ 54.915905] ? get_proto_defrag_hook+0x137/0x160 [ 54.915908] ? __report_bug+0xea/0x100 [ 54.915925] ? report_bug+0x2b/0x80 [ 54.915928] ? handle_bug+0x3c/0x70 [ 54.915939] ? exc_invalid_op+0x18/0x70 [ 54.915942] ? asm_exc_invalid_op+0x1a/0x20 [ 54.915948] ? get_proto_defrag_hook+0x137/0x160 [ 54.915950] bpf_nf_link_attach+0x1eb/0x240 [ 54.915953] link_create+0x173/0x290 [ 54.915969] __sys_bpf+0x588/0x8f0 [ 54.915974] __x64_sys_bpf+0x20/0x30 [ 54.915977] do_syscall_64+0x45/0xf0 [ 54.915989] entry_SYSCALL_64_after_hwframe+0x6e/0x76 [ 54.915998] RIP: 0033:0x7fb6e9daa51d [ 54.916001] Code: 00 c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 2b 89 0c 00 f7 d8 64 89 01 48 [ 54.916003] RSP: 002b:00007ffd15e78ed8 EFLAGS: 00000246 ORIG_RAX: 0000000000000141 [ 54.916006] RAX: ffffffffffffffda RBX: 00007ffd15e78fc0 RCX: 00007fb6e9daa51d [ 54.916007] RDX: 0000000000000040 RSI: 00007ffd15e78ef0 RDI: 000000000000001c [ 54.916009] RBP: 000000000000002d R08: 00007fb6e9e73a60 R09: 0000000000000001 [ 54.916010] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000006 [ 54.916012] R13: 0000000000000006 R14: 0000000000000000 R15: 0000000000000000 [ 54.916014] [ 54.916015] ---[ end trace 0000000000000000 ]--- Fixes: 91721c2d02d3 ("netfilter: bpf: Support BPF_F_NETFILTER_IP_DEFRAG in netfilter link") Signed-off-by: D. Wythe Acked-by: Daniel Xu Reviewed-by: Simon Horman Signed-off-by: Pablo Neira Ayuso --- net/netfilter/nf_bpf_link.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/net/netfilter/nf_bpf_link.c b/net/netfilter/nf_bpf_link.c index e502ec00b2fe..0e4beae421f8 100644 --- a/net/netfilter/nf_bpf_link.c +++ b/net/netfilter/nf_bpf_link.c @@ -31,7 +31,7 @@ struct bpf_nf_link { #if IS_ENABLED(CONFIG_NF_DEFRAG_IPV4) || IS_ENABLED(CONFIG_NF_DEFRAG_IPV6) static const struct nf_defrag_hook * get_proto_defrag_hook(struct bpf_nf_link *link, - const struct nf_defrag_hook __rcu *global_hook, + const struct nf_defrag_hook __rcu **ptr_global_hook, const char *mod) { const struct nf_defrag_hook *hook; @@ -39,7 +39,7 @@ get_proto_defrag_hook(struct bpf_nf_link *link, /* RCU protects us from races against module unloading */ rcu_read_lock(); - hook = rcu_dereference(global_hook); + hook = rcu_dereference(*ptr_global_hook); if (!hook) { rcu_read_unlock(); err = request_module(mod); @@ -47,7 +47,7 @@ get_proto_defrag_hook(struct bpf_nf_link *link, return ERR_PTR(err < 0 ? err : -EINVAL); rcu_read_lock(); - hook = rcu_dereference(global_hook); + hook = rcu_dereference(*ptr_global_hook); } if (hook && try_module_get(hook->owner)) { @@ -78,7 +78,7 @@ static int bpf_nf_enable_defrag(struct bpf_nf_link *link) switch (link->hook_ops.pf) { #if IS_ENABLED(CONFIG_NF_DEFRAG_IPV4) case NFPROTO_IPV4: - hook = get_proto_defrag_hook(link, nf_defrag_v4_hook, "nf_defrag_ipv4"); + hook = get_proto_defrag_hook(link, &nf_defrag_v4_hook, "nf_defrag_ipv4"); if (IS_ERR(hook)) return PTR_ERR(hook); @@ -87,7 +87,7 @@ static int bpf_nf_enable_defrag(struct bpf_nf_link *link) #endif #if IS_ENABLED(CONFIG_NF_DEFRAG_IPV6) case NFPROTO_IPV6: - hook = get_proto_defrag_hook(link, nf_defrag_v6_hook, "nf_defrag_ipv6"); + hook = get_proto_defrag_hook(link, &nf_defrag_v6_hook, "nf_defrag_ipv6"); if (IS_ERR(hook)) return PTR_ERR(hook); -- cgit v1.2.3 From 317eb9685095678f2c9f5a8189de698c5354316a Mon Sep 17 00:00:00 2001 From: Florian Westphal Date: Fri, 1 Dec 2023 15:47:13 +0100 Subject: netfilter: nft_set_pipapo: skip inactive elements during set walk Otherwise set elements can be deactivated twice which will cause a crash. Reported-by: Xingyuan Mo Fixes: 3c4287f62044 ("nf_tables: Add set type for arbitrary concatenation of ranges") Signed-off-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso --- net/netfilter/nft_set_pipapo.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/net/netfilter/nft_set_pipapo.c b/net/netfilter/nft_set_pipapo.c index 701977af3ee8..7252fcdae349 100644 --- a/net/netfilter/nft_set_pipapo.c +++ b/net/netfilter/nft_set_pipapo.c @@ -2043,6 +2043,9 @@ static void nft_pipapo_walk(const struct nft_ctx *ctx, struct nft_set *set, e = f->mt[r].e; + if (!nft_set_elem_active(&e->ext, iter->genmask)) + goto cont; + iter->err = iter->fn(ctx, set, iter, &e->priv); if (iter->err < 0) goto out; -- cgit v1.2.3 From 63331e37fb227e796894b31d713697612c8dee7f Mon Sep 17 00:00:00 2001 From: Florian Westphal Date: Mon, 4 Dec 2023 12:29:54 +0100 Subject: netfilter: nf_tables: fix 'exist' matching on bigendian arches MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Maze reports "tcp option fastopen exists" fails to match on OpenWrt 22.03.5, r20134-5f15225c1e (5.10.176) router. "tcp option fastopen exists" translates to: inet [ exthdr load tcpopt 1b @ 34 + 0 present => reg 1 ] [ cmp eq reg 1 0x00000001 ] .. but existing nft userspace generates a 1-byte compare. On LSB (x86), "*reg32 = 1" is identical to nft_reg_store8(reg32, 1), but not on MSB, which will place the 1 last. IOW, on bigendian aches the cmp8 is awalys false. Make sure we store this in a consistent fashion, so existing userspace will also work on MSB (bigendian). Regardless of this patch we can also change nft userspace to generate 'reg32 == 0' and 'reg32 != 0' instead of u8 == 0 // u8 == 1 when adding 'option x missing/exists' expressions as well. Fixes: 3c1fece8819e ("netfilter: nft_exthdr: Allow checking TCP option presence, too") Fixes: b9f9a485fb0e ("netfilter: nft_exthdr: add boolean DCCP option matching") Fixes: 055c4b34b94f ("netfilter: nft_fib: Support existence check") Reported-by: Maciej Żenczykowski Closes: https://lore.kernel.org/netfilter-devel/CAHo-OozyEqHUjL2-ntATzeZOiuftLWZ_HU6TOM_js4qLfDEAJg@mail.gmail.com/ Signed-off-by: Florian Westphal Acked-by: Phil Sutter Signed-off-by: Pablo Neira Ayuso --- net/netfilter/nft_exthdr.c | 4 ++-- net/netfilter/nft_fib.c | 8 ++++++-- 2 files changed, 8 insertions(+), 4 deletions(-) diff --git a/net/netfilter/nft_exthdr.c b/net/netfilter/nft_exthdr.c index 3fbaa7bf41f9..6eb571d0c3fd 100644 --- a/net/netfilter/nft_exthdr.c +++ b/net/netfilter/nft_exthdr.c @@ -214,7 +214,7 @@ static void nft_exthdr_tcp_eval(const struct nft_expr *expr, offset = i + priv->offset; if (priv->flags & NFT_EXTHDR_F_PRESENT) { - *dest = 1; + nft_reg_store8(dest, 1); } else { if (priv->len % NFT_REG32_SIZE) dest[priv->len / NFT_REG32_SIZE] = 0; @@ -461,7 +461,7 @@ static void nft_exthdr_dccp_eval(const struct nft_expr *expr, type = bufp[0]; if (type == priv->type) { - *dest = 1; + nft_reg_store8(dest, 1); return; } diff --git a/net/netfilter/nft_fib.c b/net/netfilter/nft_fib.c index 1bfe258018da..37cfe6dd712d 100644 --- a/net/netfilter/nft_fib.c +++ b/net/netfilter/nft_fib.c @@ -145,11 +145,15 @@ void nft_fib_store_result(void *reg, const struct nft_fib *priv, switch (priv->result) { case NFT_FIB_RESULT_OIF: index = dev ? dev->ifindex : 0; - *dreg = (priv->flags & NFTA_FIB_F_PRESENT) ? !!index : index; + if (priv->flags & NFTA_FIB_F_PRESENT) + nft_reg_store8(dreg, !!index); + else + *dreg = index; + break; case NFT_FIB_RESULT_OIFNAME: if (priv->flags & NFTA_FIB_F_PRESENT) - *dreg = !!dev; + nft_reg_store8(dreg, !!dev); else strscpy_pad(reg, dev ? dev->name : "", IFNAMSIZ); break; -- cgit v1.2.3 From 3701cd390fd731ee7ae8b8006246c8db82c72bea Mon Sep 17 00:00:00 2001 From: Pablo Neira Ayuso Date: Mon, 4 Dec 2023 14:25:33 +0100 Subject: netfilter: nf_tables: bail out on mismatching dynset and set expressions If dynset expressions provided by userspace is larger than the declared set expressions, then bail out. Fixes: 48b0ae046ee9 ("netfilter: nftables: netlink support for several set element expressions") Reported-by: Xingyuan Mo Signed-off-by: Pablo Neira Ayuso --- net/netfilter/nft_dynset.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) diff --git a/net/netfilter/nft_dynset.c b/net/netfilter/nft_dynset.c index b18a79039125..c09dba57354c 100644 --- a/net/netfilter/nft_dynset.c +++ b/net/netfilter/nft_dynset.c @@ -280,10 +280,15 @@ static int nft_dynset_init(const struct nft_ctx *ctx, priv->expr_array[i] = dynset_expr; priv->num_exprs++; - if (set->num_exprs && - dynset_expr->ops != set->exprs[i]->ops) { - err = -EOPNOTSUPP; - goto err_expr_free; + if (set->num_exprs) { + if (i >= set->num_exprs) { + err = -EINVAL; + goto err_expr_free; + } + if (dynset_expr->ops != set->exprs[i]->ops) { + err = -EOPNOTSUPP; + goto err_expr_free; + } } i++; } -- cgit v1.2.3 From f6e1532a2697b81da00bfb184e99d15e01e9d98c Mon Sep 17 00:00:00 2001 From: Pablo Neira Ayuso Date: Mon, 4 Dec 2023 14:51:48 +0100 Subject: netfilter: nf_tables: validate family when identifying table via handle Validate table family when looking up for it via NFTA_TABLE_HANDLE. Fixes: 3ecbfd65f50e ("netfilter: nf_tables: allocate handle and delete objects via handle") Reported-by: Xingyuan Mo Signed-off-by: Pablo Neira Ayuso --- net/netfilter/nf_tables_api.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/net/netfilter/nf_tables_api.c b/net/netfilter/nf_tables_api.c index c0a42989b982..c5c17c6e80ed 100644 --- a/net/netfilter/nf_tables_api.c +++ b/net/netfilter/nf_tables_api.c @@ -803,7 +803,7 @@ static struct nft_table *nft_table_lookup(const struct net *net, static struct nft_table *nft_table_lookup_byhandle(const struct net *net, const struct nlattr *nla, - u8 genmask, u32 nlpid) + int family, u8 genmask, u32 nlpid) { struct nftables_pernet *nft_net; struct nft_table *table; @@ -811,6 +811,7 @@ static struct nft_table *nft_table_lookup_byhandle(const struct net *net, nft_net = nft_pernet(net); list_for_each_entry(table, &nft_net->tables, list) { if (be64_to_cpu(nla_get_be64(nla)) == table->handle && + table->family == family && nft_active_genmask(table, genmask)) { if (nft_table_has_owner(table) && nlpid && table->nlpid != nlpid) @@ -1544,7 +1545,7 @@ static int nf_tables_deltable(struct sk_buff *skb, const struct nfnl_info *info, if (nla[NFTA_TABLE_HANDLE]) { attr = nla[NFTA_TABLE_HANDLE]; - table = nft_table_lookup_byhandle(net, attr, genmask, + table = nft_table_lookup_byhandle(net, attr, family, genmask, NETLINK_CB(skb).portid); } else { attr = nla[NFTA_TABLE_NAME]; -- cgit v1.2.3 From 7ae836a3d630e146b732fe8ef7d86b243748751f Mon Sep 17 00:00:00 2001 From: Phil Sutter Date: Tue, 5 Dec 2023 21:58:12 +0100 Subject: netfilter: xt_owner: Fix for unsafe access of sk->sk_socket A concurrently running sock_orphan() may NULL the sk_socket pointer in between check and deref. Follow other users (like nft_meta.c for instance) and acquire sk_callback_lock before dereferencing sk_socket. Fixes: 0265ab44bacc ("[NETFILTER]: merge ipt_owner/ip6t_owner in xt_owner") Reported-by: Jann Horn Signed-off-by: Phil Sutter Signed-off-by: Pablo Neira Ayuso --- net/netfilter/xt_owner.c | 16 ++++++++++++---- 1 file changed, 12 insertions(+), 4 deletions(-) diff --git a/net/netfilter/xt_owner.c b/net/netfilter/xt_owner.c index e85ce69924ae..50332888c8d2 100644 --- a/net/netfilter/xt_owner.c +++ b/net/netfilter/xt_owner.c @@ -76,18 +76,23 @@ owner_mt(const struct sk_buff *skb, struct xt_action_param *par) */ return false; - filp = sk->sk_socket->file; - if (filp == NULL) + read_lock_bh(&sk->sk_callback_lock); + filp = sk->sk_socket ? sk->sk_socket->file : NULL; + if (filp == NULL) { + read_unlock_bh(&sk->sk_callback_lock); return ((info->match ^ info->invert) & (XT_OWNER_UID | XT_OWNER_GID)) == 0; + } if (info->match & XT_OWNER_UID) { kuid_t uid_min = make_kuid(net->user_ns, info->uid_min); kuid_t uid_max = make_kuid(net->user_ns, info->uid_max); if ((uid_gte(filp->f_cred->fsuid, uid_min) && uid_lte(filp->f_cred->fsuid, uid_max)) ^ - !(info->invert & XT_OWNER_UID)) + !(info->invert & XT_OWNER_UID)) { + read_unlock_bh(&sk->sk_callback_lock); return false; + } } if (info->match & XT_OWNER_GID) { @@ -112,10 +117,13 @@ owner_mt(const struct sk_buff *skb, struct xt_action_param *par) } } - if (match ^ !(info->invert & XT_OWNER_GID)) + if (match ^ !(info->invert & XT_OWNER_GID)) { + read_unlock_bh(&sk->sk_callback_lock); return false; + } } + read_unlock_bh(&sk->sk_callback_lock); return true; } -- cgit v1.2.3 From 823342524868168bf681f135d01b4ae10f5863ec Mon Sep 17 00:00:00 2001 From: Shyam Prasad N Date: Wed, 6 Dec 2023 16:37:37 +0000 Subject: Revert "cifs: reconnect work should have reference on server struct" This reverts commit 19a4b9d6c372cab6a3b2c9a061a236136fe95274. This earlier commit was making an assumption that each mod_delayed_work called for the reconnect work would result in smb2_reconnect_server being called twice. This assumption turns out to be untrue. So reverting this change for now. I will submit a follow-up patch to fix the actual problem in a different way. Signed-off-by: Shyam Prasad N Signed-off-by: Steve French --- fs/smb/client/connect.c | 27 ++++++--------------------- fs/smb/client/smb2pdu.c | 23 ++++++++++------------- 2 files changed, 16 insertions(+), 34 deletions(-) diff --git a/fs/smb/client/connect.c b/fs/smb/client/connect.c index f896f60c924b..e07975173cf4 100644 --- a/fs/smb/client/connect.c +++ b/fs/smb/client/connect.c @@ -402,13 +402,7 @@ static int __cifs_reconnect(struct TCP_Server_Info *server, spin_unlock(&server->srv_lock); cifs_swn_reset_server_dstaddr(server); cifs_server_unlock(server); - - /* increase ref count which reconnect work will drop */ - spin_lock(&cifs_tcp_ses_lock); - server->srv_count++; - spin_unlock(&cifs_tcp_ses_lock); - if (mod_delayed_work(cifsiod_wq, &server->reconnect, 0)) - cifs_put_tcp_session(server, false); + mod_delayed_work(cifsiod_wq, &server->reconnect, 0); } } while (server->tcpStatus == CifsNeedReconnect); @@ -538,13 +532,7 @@ static int reconnect_dfs_server(struct TCP_Server_Info *server) spin_unlock(&server->srv_lock); cifs_swn_reset_server_dstaddr(server); cifs_server_unlock(server); - - /* increase ref count which reconnect work will drop */ - spin_lock(&cifs_tcp_ses_lock); - server->srv_count++; - spin_unlock(&cifs_tcp_ses_lock); - if (mod_delayed_work(cifsiod_wq, &server->reconnect, 0)) - cifs_put_tcp_session(server, false); + mod_delayed_work(cifsiod_wq, &server->reconnect, 0); } while (server->tcpStatus == CifsNeedReconnect); mutex_lock(&server->refpath_lock); @@ -1626,19 +1614,16 @@ cifs_put_tcp_session(struct TCP_Server_Info *server, int from_reconnect) cancel_delayed_work_sync(&server->echo); - if (from_reconnect) { + if (from_reconnect) /* * Avoid deadlock here: reconnect work calls * cifs_put_tcp_session() at its end. Need to be sure * that reconnect work does nothing with server pointer after * that step. */ - if (cancel_delayed_work(&server->reconnect)) - cifs_put_tcp_session(server, from_reconnect); - } else { - if (cancel_delayed_work_sync(&server->reconnect)) - cifs_put_tcp_session(server, from_reconnect); - } + cancel_delayed_work(&server->reconnect); + else + cancel_delayed_work_sync(&server->reconnect); spin_lock(&server->srv_lock); server->tcpStatus = CifsExiting; diff --git a/fs/smb/client/smb2pdu.c b/fs/smb/client/smb2pdu.c index 395e1230ddbc..9d7289f8d87b 100644 --- a/fs/smb/client/smb2pdu.c +++ b/fs/smb/client/smb2pdu.c @@ -3952,6 +3952,12 @@ void smb2_reconnect_server(struct work_struct *work) } spin_unlock(&ses->chan_lock); } + /* + * Get the reference to server struct to be sure that the last call of + * cifs_put_tcon() in the loop below won't release the server pointer. + */ + if (tcon_exist || ses_exist) + server->srv_count++; spin_unlock(&cifs_tcp_ses_lock); @@ -3999,17 +4005,13 @@ void smb2_reconnect_server(struct work_struct *work) done: cifs_dbg(FYI, "Reconnecting tcons and channels finished\n"); - if (resched) { + if (resched) queue_delayed_work(cifsiod_wq, &server->reconnect, 2 * HZ); - mutex_unlock(&pserver->reconnect_mutex); - - /* no need to put tcp session as we're retrying */ - return; - } mutex_unlock(&pserver->reconnect_mutex); /* now we can safely release srv struct */ - cifs_put_tcp_session(server, true); + if (tcon_exist || ses_exist) + cifs_put_tcp_session(server, 1); } int @@ -4029,12 +4031,7 @@ SMB2_echo(struct TCP_Server_Info *server) server->ops->need_neg(server)) { spin_unlock(&server->srv_lock); /* No need to send echo on newly established connections */ - spin_lock(&cifs_tcp_ses_lock); - server->srv_count++; - spin_unlock(&cifs_tcp_ses_lock); - if (mod_delayed_work(cifsiod_wq, &server->reconnect, 0)) - cifs_put_tcp_session(server, false); - + mod_delayed_work(cifsiod_wq, &server->reconnect, 0); return rc; } spin_unlock(&server->srv_lock); -- cgit v1.2.3 From 04909192ada3285070f8ced0af7f07735478b364 Mon Sep 17 00:00:00 2001 From: Shyam Prasad N Date: Wed, 6 Dec 2023 16:37:38 +0000 Subject: cifs: reconnect worker should take reference on server struct unconditionally Reconnect worker currently assumes that the server struct is alive and only takes reference on the server if it needs to call smb2_reconnect. With the new ability to disable channels based on whether the server has multichannel disabled, this becomes a problem when we need to disable established channels. While disabling the channels and deallocating the server, there could be reconnect work that could not be cancelled (because it started). This change forces the reconnect worker to unconditionally take a reference on the server when it runs. Also, this change now allows smb2_reconnect to know if it was called by the reconnect worker. Based on this, the cifs_put_tcp_session can decide whether it can cancel the reconnect work synchronously or not. Signed-off-by: Shyam Prasad N Signed-off-by: Steve French --- fs/smb/client/connect.c | 8 ++++---- fs/smb/client/smb2pdu.c | 29 +++++++++++++++-------------- 2 files changed, 19 insertions(+), 18 deletions(-) diff --git a/fs/smb/client/connect.c b/fs/smb/client/connect.c index e07975173cf4..9dc6dc2754c2 100644 --- a/fs/smb/client/connect.c +++ b/fs/smb/client/connect.c @@ -1608,10 +1608,6 @@ cifs_put_tcp_session(struct TCP_Server_Info *server, int from_reconnect) list_del_init(&server->tcp_ses_list); spin_unlock(&cifs_tcp_ses_lock); - /* For secondary channels, we pick up ref-count on the primary server */ - if (SERVER_IS_CHAN(server)) - cifs_put_tcp_session(server->primary_server, from_reconnect); - cancel_delayed_work_sync(&server->echo); if (from_reconnect) @@ -1625,6 +1621,10 @@ cifs_put_tcp_session(struct TCP_Server_Info *server, int from_reconnect) else cancel_delayed_work_sync(&server->reconnect); + /* For secondary channels, we pick up ref-count on the primary server */ + if (SERVER_IS_CHAN(server)) + cifs_put_tcp_session(server->primary_server, from_reconnect); + spin_lock(&server->srv_lock); server->tcpStatus = CifsExiting; spin_unlock(&server->srv_lock); diff --git a/fs/smb/client/smb2pdu.c b/fs/smb/client/smb2pdu.c index 9d7289f8d87b..20634fc6d4f0 100644 --- a/fs/smb/client/smb2pdu.c +++ b/fs/smb/client/smb2pdu.c @@ -158,7 +158,7 @@ out: static int smb2_reconnect(__le16 smb2_command, struct cifs_tcon *tcon, - struct TCP_Server_Info *server) + struct TCP_Server_Info *server, bool from_reconnect) { int rc = 0; struct nls_table *nls_codepage = NULL; @@ -331,7 +331,7 @@ again: * as cifs_put_tcp_session takes a higher lock * i.e. cifs_tcp_ses_lock */ - cifs_put_tcp_session(server, 1); + cifs_put_tcp_session(server, from_reconnect); server->terminate = true; cifs_signal_cifsd_for_reconnect(server, false); @@ -499,7 +499,7 @@ static int smb2_plain_req_init(__le16 smb2_command, struct cifs_tcon *tcon, { int rc; - rc = smb2_reconnect(smb2_command, tcon, server); + rc = smb2_reconnect(smb2_command, tcon, server, false); if (rc) return rc; @@ -3895,6 +3895,15 @@ void smb2_reconnect_server(struct work_struct *work) int rc; bool resched = false; + /* first check if ref count has reached 0, if not inc ref count */ + spin_lock(&cifs_tcp_ses_lock); + if (!server->srv_count) { + spin_unlock(&cifs_tcp_ses_lock); + return; + } + server->srv_count++; + spin_unlock(&cifs_tcp_ses_lock); + /* If server is a channel, select the primary channel */ pserver = SERVER_IS_CHAN(server) ? server->primary_server : server; @@ -3952,17 +3961,10 @@ void smb2_reconnect_server(struct work_struct *work) } spin_unlock(&ses->chan_lock); } - /* - * Get the reference to server struct to be sure that the last call of - * cifs_put_tcon() in the loop below won't release the server pointer. - */ - if (tcon_exist || ses_exist) - server->srv_count++; - spin_unlock(&cifs_tcp_ses_lock); list_for_each_entry_safe(tcon, tcon2, &tmp_list, rlist) { - rc = smb2_reconnect(SMB2_INTERNAL_CMD, tcon, server); + rc = smb2_reconnect(SMB2_INTERNAL_CMD, tcon, server, true); if (!rc) cifs_reopen_persistent_handles(tcon); else @@ -3995,7 +3997,7 @@ void smb2_reconnect_server(struct work_struct *work) /* now reconnect sessions for necessary channels */ list_for_each_entry_safe(ses, ses2, &tmp_ses_list, rlist) { tcon->ses = ses; - rc = smb2_reconnect(SMB2_INTERNAL_CMD, tcon, server); + rc = smb2_reconnect(SMB2_INTERNAL_CMD, tcon, server, true); if (rc) resched = true; list_del_init(&ses->rlist); @@ -4010,8 +4012,7 @@ done: mutex_unlock(&pserver->reconnect_mutex); /* now we can safely release srv struct */ - if (tcon_exist || ses_exist) - cifs_put_tcp_session(server, 1); + cifs_put_tcp_session(server, true); } int -- cgit v1.2.3 From b2dd797543cfa6580eac8408dd67fa02164d9e56 Mon Sep 17 00:00:00 2001 From: "Steven Rostedt (Google)" Date: Wed, 6 Dec 2023 10:02:44 -0500 Subject: ring-buffer: Force absolute timestamp on discard of event There's a race where if an event is discarded from the ring buffer and an interrupt were to happen at that time and insert an event, the time stamp is still used from the discarded event as an offset. This can screw up the timings. If the event is going to be discarded, set the "before_stamp" to zero. When a new event comes in, it compares the "before_stamp" with the "write_stamp" and if they are not equal, it will insert an absolute timestamp. This will prevent the timings from getting out of sync due to the discarded event. Link: https://lore.kernel.org/linux-trace-kernel/20231206100244.5130f9b3@gandalf.local.home Cc: stable@vger.kernel.org Cc: Masami Hiramatsu Cc: Mark Rutland Cc: Mathieu Desnoyers Fixes: 6f6be606e763f ("ring-buffer: Force before_stamp and write_stamp to be different on discard") Signed-off-by: Steven Rostedt (Google) --- kernel/trace/ring_buffer.c | 19 ++++++++----------- 1 file changed, 8 insertions(+), 11 deletions(-) diff --git a/kernel/trace/ring_buffer.c b/kernel/trace/ring_buffer.c index 43cc47d7faaf..a6da2d765c78 100644 --- a/kernel/trace/ring_buffer.c +++ b/kernel/trace/ring_buffer.c @@ -3030,22 +3030,19 @@ rb_try_to_discard(struct ring_buffer_per_cpu *cpu_buffer, local_read(&bpage->write) & ~RB_WRITE_MASK; unsigned long event_length = rb_event_length(event); + /* + * For the before_stamp to be different than the write_stamp + * to make sure that the next event adds an absolute + * value and does not rely on the saved write stamp, which + * is now going to be bogus. + */ + rb_time_set(&cpu_buffer->before_stamp, 0); + /* Something came in, can't discard */ if (!rb_time_cmpxchg(&cpu_buffer->write_stamp, write_stamp, write_stamp - delta)) return false; - /* - * It's possible that the event time delta is zero - * (has the same time stamp as the previous event) - * in which case write_stamp and before_stamp could - * be the same. In such a case, force before_stamp - * to be different than write_stamp. It doesn't - * matter what it is, as long as its different. - */ - if (!delta) - rb_time_set(&cpu_buffer->before_stamp, 0); - /* * If an event were to come in now, it would see that the * write_stamp and the before_stamp are different, and assume -- cgit v1.2.3 From f458a1453424e03462b5bb539673c9a3cddda480 Mon Sep 17 00:00:00 2001 From: "Steven Rostedt (Google)" Date: Wed, 6 Dec 2023 10:00:50 -0500 Subject: ring-buffer: Test last update in 32bit version of __rb_time_read() Since 64 bit cmpxchg() is very expensive on 32bit architectures, the timestamp used by the ring buffer does some interesting tricks to be able to still have an atomic 64 bit number. It originally just used 60 bits and broke it up into two 32 bit words where the extra 2 bits were used for synchronization. But this was not enough for all use cases, and all 64 bits were required. The 32bit version of the ring buffer timestamp was then broken up into 3 32bit words using the same counter trick. But one update was not done. The check to see if the read operation was done without interruption only checked the first two words and not last one (like it had before this update). Fix it by making sure all three updates happen without interruption by comparing the initial counter with the last updated counter. Link: https://lore.kernel.org/linux-trace-kernel/20231206100050.3100b7bb@gandalf.local.home Cc: stable@vger.kernel.org Cc: Masami Hiramatsu Cc: Mark Rutland Cc: Mathieu Desnoyers Fixes: f03f2abce4f39 ("ring-buffer: Have 32 bit time stamps use all 64 bits") Signed-off-by: Steven Rostedt (Google) --- kernel/trace/ring_buffer.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/kernel/trace/ring_buffer.c b/kernel/trace/ring_buffer.c index a6da2d765c78..8d2a4f00eca9 100644 --- a/kernel/trace/ring_buffer.c +++ b/kernel/trace/ring_buffer.c @@ -644,8 +644,8 @@ static inline bool __rb_time_read(rb_time_t *t, u64 *ret, unsigned long *cnt) *cnt = rb_time_cnt(top); - /* If top and bottom counts don't match, this interrupted a write */ - if (*cnt != rb_time_cnt(bottom)) + /* If top and msb counts don't match, this interrupted a write */ + if (*cnt != rb_time_cnt(msb)) return false; /* The shift to msb will lose its cnt bits */ -- cgit v1.2.3 From d6a57588666301acd9d42d3b00d74240964f07f6 Mon Sep 17 00:00:00 2001 From: Jiadong Zhu Date: Fri, 1 Dec 2023 08:38:15 +0800 Subject: drm/amdgpu: disable MCBP by default Disable MCBP(mid command buffer preemption) by default as old Mesa hangs with it. We shall not enable the feature that breaks old usermode driver. Fixes: 50a7c8765ca6 ("drm/amdgpu: enable mcbp by default on gfx9") Signed-off-by: Jiadong Zhu Acked-by: Alex Deucher Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/amdgpu/amdgpu_device.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c index 5c0817cbc7c2..1cc1ae2743c1 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c @@ -3791,10 +3791,6 @@ static void amdgpu_device_set_mcbp(struct amdgpu_device *adev) adev->gfx.mcbp = true; else if (amdgpu_mcbp == 0) adev->gfx.mcbp = false; - else if ((amdgpu_ip_version(adev, GC_HWIP, 0) >= IP_VERSION(9, 0, 0)) && - (amdgpu_ip_version(adev, GC_HWIP, 0) < IP_VERSION(10, 0, 0)) && - adev->gfx.num_gfx_rings) - adev->gfx.mcbp = true; if (amdgpu_sriov_vf(adev)) adev->gfx.mcbp = true; -- cgit v1.2.3 From f2d87a759f6841a132e845e2fafdad37385ddd30 Mon Sep 17 00:00:00 2001 From: Yu Kuai Date: Tue, 5 Dec 2023 17:42:13 +0800 Subject: md: fix missing flush of sync_work Commit ac619781967b ("md: use separate work_struct for md_start_sync()") use a new sync_work to replace del_work, however, stop_sync_thread() and __md_stop_writes() was trying to wait for sync_thread to be done, hence they should switch to use sync_work as well. Noted that md_start_sync() from sync_work will grab 'reconfig_mutex', hence other contex can't held the same lock to flush work, and this will be fixed in later patches. Fixes: ac619781967b ("md: use separate work_struct for md_start_sync()") Signed-off-by: Yu Kuai Acked-by: Xiao Ni Signed-off-by: Song Liu Link: https://lore.kernel.org/r/20231205094215.1824240-2-yukuai1@huaweicloud.com --- drivers/md/md.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/md/md.c b/drivers/md/md.c index c94373d64f2c..5640a948086b 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -4857,7 +4857,7 @@ static void stop_sync_thread(struct mddev *mddev) return; } - if (work_pending(&mddev->del_work)) + if (work_pending(&mddev->sync_work)) flush_workqueue(md_misc_wq); set_bit(MD_RECOVERY_INTR, &mddev->recovery); @@ -6265,7 +6265,7 @@ static void md_clean(struct mddev *mddev) static void __md_stop_writes(struct mddev *mddev) { set_bit(MD_RECOVERY_FROZEN, &mddev->recovery); - if (work_pending(&mddev->del_work)) + if (work_pending(&mddev->sync_work)) flush_workqueue(md_misc_wq); if (mddev->sync_thread) { set_bit(MD_RECOVERY_INTR, &mddev->recovery); -- cgit v1.2.3 From c9f7cb5b2bc968adcdc686c197ed108f47fd8eb0 Mon Sep 17 00:00:00 2001 From: Yu Kuai Date: Tue, 5 Dec 2023 17:42:14 +0800 Subject: md: don't leave 'MD_RECOVERY_FROZEN' in error path of md_set_readonly() If md_set_readonly() failed, the array could still be read-write, however 'MD_RECOVERY_FROZEN' could still be set, which leave the array in an abnormal state that sync or recovery can't continue anymore. Hence make sure the flag is cleared after md_set_readonly() returns. Fixes: 88724bfa68be ("md: wait for pending superblock updates before switching to read-only") Signed-off-by: Yu Kuai Acked-by: Xiao Ni Signed-off-by: Song Liu Link: https://lore.kernel.org/r/20231205094215.1824240-3-yukuai1@huaweicloud.com --- drivers/md/md.c | 24 +++++++++++++----------- 1 file changed, 13 insertions(+), 11 deletions(-) diff --git a/drivers/md/md.c b/drivers/md/md.c index 5640a948086b..2d8e45a1af23 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -6355,6 +6355,9 @@ static int md_set_readonly(struct mddev *mddev, struct block_device *bdev) int err = 0; int did_freeze = 0; + if (mddev->external && test_bit(MD_SB_CHANGE_PENDING, &mddev->sb_flags)) + return -EBUSY; + if (!test_bit(MD_RECOVERY_FROZEN, &mddev->recovery)) { did_freeze = 1; set_bit(MD_RECOVERY_FROZEN, &mddev->recovery); @@ -6369,8 +6372,6 @@ static int md_set_readonly(struct mddev *mddev, struct block_device *bdev) */ md_wakeup_thread_directly(mddev->sync_thread); - if (mddev->external && test_bit(MD_SB_CHANGE_PENDING, &mddev->sb_flags)) - return -EBUSY; mddev_unlock(mddev); wait_event(resync_wait, !test_bit(MD_RECOVERY_RUNNING, &mddev->recovery)); @@ -6383,29 +6384,30 @@ static int md_set_readonly(struct mddev *mddev, struct block_device *bdev) mddev->sync_thread || test_bit(MD_RECOVERY_RUNNING, &mddev->recovery)) { pr_warn("md: %s still in use.\n",mdname(mddev)); - if (did_freeze) { - clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery); - set_bit(MD_RECOVERY_NEEDED, &mddev->recovery); - md_wakeup_thread(mddev->thread); - } err = -EBUSY; goto out; } + if (mddev->pers) { __md_stop_writes(mddev); - err = -ENXIO; - if (mddev->ro == MD_RDONLY) + if (mddev->ro == MD_RDONLY) { + err = -ENXIO; goto out; + } + mddev->ro = MD_RDONLY; set_disk_ro(mddev->gendisk, 1); + } + +out: + if ((mddev->pers && !err) || did_freeze) { clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery); set_bit(MD_RECOVERY_NEEDED, &mddev->recovery); md_wakeup_thread(mddev->thread); sysfs_notify_dirent_safe(mddev->sysfs_state); - err = 0; } -out: + mutex_unlock(&mddev->open_mutex); return err; } -- cgit v1.2.3 From f52f5c71f3d4bb0992800139d2f35cf9f6f6e0ee Mon Sep 17 00:00:00 2001 From: Yu Kuai Date: Tue, 5 Dec 2023 17:42:15 +0800 Subject: md: fix stopping sync thread Currently sync thread is stopped from multiple contex: - idle_sync_thread - frozen_sync_thread - __md_stop_writes - md_set_readonly - do_md_stop And there are some problems: 1) sync_work is flushed while reconfig_mutex is grabbed, this can deadlock because the work function will grab reconfig_mutex as well. 2) md_reap_sync_thread() can't be called directly while md_do_sync() is not finished yet, for example, commit 130443d60b1b ("md: refactor idle/frozen_sync_thread() to fix deadlock"). 3) If MD_RECOVERY_RUNNING is not set, there is no need to stop sync_thread at all because sync_thread must not be registered. Factor out a helper stop_sync_thread(), so that above contex will behave the same. Fix 1) by flushing sync_work after reconfig_mutex is released, before waiting for sync_thread to be done; Fix 2) bt letting daemon thread to unregister sync_thread; Fix 3) by always checking MD_RECOVERY_RUNNING first. Fixes: db5e653d7c9f ("md: delay choosing sync action to md_start_sync()") Signed-off-by: Yu Kuai Signed-off-by: Song Liu Link: https://lore.kernel.org/r/20231205094215.1824240-4-yukuai1@huaweicloud.com --- drivers/md/md.c | 90 ++++++++++++++++++++++++--------------------------------- 1 file changed, 37 insertions(+), 53 deletions(-) diff --git a/drivers/md/md.c b/drivers/md/md.c index 2d8e45a1af23..bc9d67af1961 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -4840,25 +4840,29 @@ action_show(struct mddev *mddev, char *page) return sprintf(page, "%s\n", type); } -static void stop_sync_thread(struct mddev *mddev) +/** + * stop_sync_thread() - wait for sync_thread to stop if it's running. + * @mddev: the array. + * @locked: if set, reconfig_mutex will still be held after this function + * return; if not set, reconfig_mutex will be released after this + * function return. + * @check_seq: if set, only wait for curent running sync_thread to stop, noted + * that new sync_thread can still start. + */ +static void stop_sync_thread(struct mddev *mddev, bool locked, bool check_seq) { - if (!test_bit(MD_RECOVERY_RUNNING, &mddev->recovery)) - return; + int sync_seq; - if (mddev_lock(mddev)) - return; + if (check_seq) + sync_seq = atomic_read(&mddev->sync_seq); - /* - * Check again in case MD_RECOVERY_RUNNING is cleared before lock is - * held. - */ if (!test_bit(MD_RECOVERY_RUNNING, &mddev->recovery)) { - mddev_unlock(mddev); + if (!locked) + mddev_unlock(mddev); return; } - if (work_pending(&mddev->sync_work)) - flush_workqueue(md_misc_wq); + mddev_unlock(mddev); set_bit(MD_RECOVERY_INTR, &mddev->recovery); /* @@ -4866,21 +4870,28 @@ static void stop_sync_thread(struct mddev *mddev) * never happen */ md_wakeup_thread_directly(mddev->sync_thread); + if (work_pending(&mddev->sync_work)) + flush_work(&mddev->sync_work); - mddev_unlock(mddev); + wait_event(resync_wait, + !test_bit(MD_RECOVERY_RUNNING, &mddev->recovery) || + (check_seq && sync_seq != atomic_read(&mddev->sync_seq))); + + if (locked) + mddev_lock_nointr(mddev); } static void idle_sync_thread(struct mddev *mddev) { - int sync_seq = atomic_read(&mddev->sync_seq); - mutex_lock(&mddev->sync_mutex); clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery); - stop_sync_thread(mddev); - wait_event(resync_wait, sync_seq != atomic_read(&mddev->sync_seq) || - !test_bit(MD_RECOVERY_RUNNING, &mddev->recovery)); + if (mddev_lock(mddev)) { + mutex_unlock(&mddev->sync_mutex); + return; + } + stop_sync_thread(mddev, false, true); mutex_unlock(&mddev->sync_mutex); } @@ -4888,11 +4899,13 @@ static void frozen_sync_thread(struct mddev *mddev) { mutex_lock(&mddev->sync_mutex); set_bit(MD_RECOVERY_FROZEN, &mddev->recovery); - stop_sync_thread(mddev); - wait_event(resync_wait, mddev->sync_thread == NULL && - !test_bit(MD_RECOVERY_RUNNING, &mddev->recovery)); + if (mddev_lock(mddev)) { + mutex_unlock(&mddev->sync_mutex); + return; + } + stop_sync_thread(mddev, false, false); mutex_unlock(&mddev->sync_mutex); } @@ -6264,14 +6277,7 @@ static void md_clean(struct mddev *mddev) static void __md_stop_writes(struct mddev *mddev) { - set_bit(MD_RECOVERY_FROZEN, &mddev->recovery); - if (work_pending(&mddev->sync_work)) - flush_workqueue(md_misc_wq); - if (mddev->sync_thread) { - set_bit(MD_RECOVERY_INTR, &mddev->recovery); - md_reap_sync_thread(mddev); - } - + stop_sync_thread(mddev, true, false); del_timer_sync(&mddev->safemode_timer); if (mddev->pers && mddev->pers->quiesce) { @@ -6363,18 +6369,8 @@ static int md_set_readonly(struct mddev *mddev, struct block_device *bdev) set_bit(MD_RECOVERY_FROZEN, &mddev->recovery); md_wakeup_thread(mddev->thread); } - if (test_bit(MD_RECOVERY_RUNNING, &mddev->recovery)) - set_bit(MD_RECOVERY_INTR, &mddev->recovery); - - /* - * Thread might be blocked waiting for metadata update which will now - * never happen - */ - md_wakeup_thread_directly(mddev->sync_thread); - mddev_unlock(mddev); - wait_event(resync_wait, !test_bit(MD_RECOVERY_RUNNING, - &mddev->recovery)); + stop_sync_thread(mddev, false, false); wait_event(mddev->sb_wait, !test_bit(MD_SB_CHANGE_PENDING, &mddev->sb_flags)); mddev_lock_nointr(mddev); @@ -6428,20 +6424,8 @@ static int do_md_stop(struct mddev *mddev, int mode, set_bit(MD_RECOVERY_FROZEN, &mddev->recovery); md_wakeup_thread(mddev->thread); } - if (test_bit(MD_RECOVERY_RUNNING, &mddev->recovery)) - set_bit(MD_RECOVERY_INTR, &mddev->recovery); - /* - * Thread might be blocked waiting for metadata update which will now - * never happen - */ - md_wakeup_thread_directly(mddev->sync_thread); - - mddev_unlock(mddev); - wait_event(resync_wait, (mddev->sync_thread == NULL && - !test_bit(MD_RECOVERY_RUNNING, - &mddev->recovery))); - mddev_lock_nointr(mddev); + stop_sync_thread(mddev, true, false); mutex_lock(&mddev->open_mutex); if ((mddev->pers && atomic_read(&mddev->openers) > !!bdev) || -- cgit v1.2.3 From fec05adc40c25a028c9dfa9d540f800a2d433f80 Mon Sep 17 00:00:00 2001 From: Alvin Lee Date: Fri, 1 Dec 2023 06:25:07 -0700 Subject: drm/amd/display: Use channel_width = 2 for vram table 3.0 VBIOS has suggested to use channel_width=2 for any ASIC that uses vram info 3.0. This is because channel_width in the vram table no longer represents the memory width Tested-by: Daniel Wheeler Reviewed-by: Samson Tam Acked-by: Rodrigo Siqueira Signed-off-by: Alvin Lee Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/dc/bios/bios_parser2.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/amd/display/dc/bios/bios_parser2.c b/drivers/gpu/drm/amd/display/dc/bios/bios_parser2.c index 7cdb1a8a0ba0..6a96810a477e 100644 --- a/drivers/gpu/drm/amd/display/dc/bios/bios_parser2.c +++ b/drivers/gpu/drm/amd/display/dc/bios/bios_parser2.c @@ -2386,7 +2386,13 @@ static enum bp_result get_vram_info_v30( return BP_RESULT_BADBIOSTABLE; info->num_chans = info_v30->channel_num; - info->dram_channel_width_bytes = (1 << info_v30->channel_width) / 8; + /* As suggested by VBIOS we should always use + * dram_channel_width_bytes = 2 when using VRAM + * table version 3.0. This is because the channel_width + * param in the VRAM info table is changed in 7000 series and + * no longer represents the memory channel width. + */ + info->dram_channel_width_bytes = 2; return result; } -- cgit v1.2.3 From 3d71a8726e05a35beb9de394e86ce896d69e563f Mon Sep 17 00:00:00 2001 From: Ivan Lipski Date: Fri, 1 Dec 2023 06:25:16 -0700 Subject: drm/amd/display: Add monitor patch for specific eDP [WHY] Some eDP panels's ext caps don't write initial value cause the value of dpcd_addr(0x317) is random. It means that sometimes the eDP will clarify it is OLED, miniLED...etc cause the backlight control interface is incorrect. [HOW] Add a new panel patch to remove sink ext caps(HDR,OLED...etc) Tested-by: Daniel Wheeler Reviewed-by: Sun peng Li Acked-by: Rodrigo Siqueira Signed-off-by: Ivan Lipski Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_helpers.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_helpers.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_helpers.c index c7a29bb737e2..aac98f93545a 100644 --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_helpers.c +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_helpers.c @@ -63,6 +63,12 @@ static void apply_edid_quirks(struct edid *edid, struct dc_edid_caps *edid_caps) DRM_DEBUG_DRIVER("Disabling FAMS on monitor with panel id %X\n", panel_id); edid_caps->panel_patch.disable_fams = true; break; + /* Workaround for some monitors that do not clear DPCD 0x317 if FreeSync is unsupported */ + case drm_edid_encode_panel_id('A', 'U', 'O', 0xA7AB): + case drm_edid_encode_panel_id('A', 'U', 'O', 0xE69B): + DRM_DEBUG_DRIVER("Clearing DPCD 0x317 on monitor with panel id %X\n", panel_id); + edid_caps->panel_patch.remove_sink_ext_caps = true; + break; default: return; } -- cgit v1.2.3 From 9f7cb03e3c32613fb5891e10ce3ff9169b09ba69 Mon Sep 17 00:00:00 2001 From: Roman Li Date: Fri, 1 Dec 2023 06:25:40 -0700 Subject: drm/amd/display: Fix array-index-out-of-bounds in dml2 [Why] UBSAN errors observed in dmesg. array-index-out-of-bounds in dml2/display_mode_core.c [How] Fix the index. Tested-by: Daniel Wheeler Acked-by: Rodrigo Siqueira Signed-off-by: Roman Li Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/dc/dml2/display_mode_core.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/amd/display/dc/dml2/display_mode_core.c b/drivers/gpu/drm/amd/display/dc/dml2/display_mode_core.c index 59718ee33e51..4d1336e5afc2 100644 --- a/drivers/gpu/drm/amd/display/dc/dml2/display_mode_core.c +++ b/drivers/gpu/drm/amd/display/dc/dml2/display_mode_core.c @@ -9447,12 +9447,12 @@ void dml_core_mode_programming(struct display_mode_lib_st *mode_lib, const struc // Output CalculateWatermarks_params->Watermark = &s->dummy_watermark; // Watermarks *Watermark - CalculateWatermarks_params->DRAMClockChangeSupport = &mode_lib->ms.support.DRAMClockChangeSupport[j]; + CalculateWatermarks_params->DRAMClockChangeSupport = &mode_lib->ms.support.DRAMClockChangeSupport[0]; CalculateWatermarks_params->MaxActiveDRAMClockChangeLatencySupported = &s->dummy_single_array[0][0]; // dml_float_t *MaxActiveDRAMClockChangeLatencySupported[] CalculateWatermarks_params->SubViewportLinesNeededInMALL = &mode_lib->ms.SubViewportLinesNeededInMALL[j]; // dml_uint_t SubViewportLinesNeededInMALL[] - CalculateWatermarks_params->FCLKChangeSupport = &mode_lib->ms.support.FCLKChangeSupport[j]; + CalculateWatermarks_params->FCLKChangeSupport = &mode_lib->ms.support.FCLKChangeSupport[0]; CalculateWatermarks_params->MaxActiveFCLKChangeLatencySupported = &s->dummy_single[0]; // dml_float_t *MaxActiveFCLKChangeLatencySupported - CalculateWatermarks_params->USRRetrainingSupport = &mode_lib->ms.support.USRRetrainingSupport[j]; + CalculateWatermarks_params->USRRetrainingSupport = &mode_lib->ms.support.USRRetrainingSupport[0]; CalculateWatermarksMALLUseAndDRAMSpeedChangeSupport( &mode_lib->scratch, -- cgit v1.2.3 From 78825df90d427b26964bf9610eaac30542ee9e2d Mon Sep 17 00:00:00 2001 From: Li Ma Date: Tue, 14 Nov 2023 16:17:51 +0800 Subject: drm/amd/swsmu: update smu v14_0_0 driver if version and metrics table Increment the driver if version and add new mems to the mertics table. Signed-off-by: Li Ma Reviewed-by: Yifan Zhang Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/include/kgd_pp_interface.h | 17 +++++ drivers/gpu/drm/amd/pm/swsmu/inc/amdgpu_smu.h | 10 +++ .../pm/swsmu/inc/pmfw_if/smu14_driver_if_v14_0_0.h | 77 +++++++++++++--------- .../gpu/drm/amd/pm/swsmu/smu14/smu_v14_0_0_ppt.c | 46 ++++++++++++- 4 files changed, 115 insertions(+), 35 deletions(-) diff --git a/drivers/gpu/drm/amd/include/kgd_pp_interface.h b/drivers/gpu/drm/amd/include/kgd_pp_interface.h index 0d1209f2cf31..1c5049e894e3 100644 --- a/drivers/gpu/drm/amd/include/kgd_pp_interface.h +++ b/drivers/gpu/drm/amd/include/kgd_pp_interface.h @@ -1085,6 +1085,10 @@ struct gpu_metrics_v3_0 { uint16_t average_dram_reads; /* time filtered DRAM write bandwidth [MB/sec] */ uint16_t average_dram_writes; + /* time filtered IPU read bandwidth [MB/sec] */ + uint16_t average_ipu_reads; + /* time filtered IPU write bandwidth [MB/sec] */ + uint16_t average_ipu_writes; /* Driver attached timestamp (in ns) */ uint64_t system_clock_counter; @@ -1104,6 +1108,8 @@ struct gpu_metrics_v3_0 { uint32_t average_all_core_power; /* calculated core power [mW] */ uint16_t average_core_power[16]; + /* time filtered total system power [mW] */ + uint16_t average_sys_power; /* maximum IRM defined STAPM power limit [mW] */ uint16_t stapm_power_limit; /* time filtered STAPM power limit [mW] */ @@ -1116,6 +1122,8 @@ struct gpu_metrics_v3_0 { uint16_t average_ipuclk_frequency; uint16_t average_fclk_frequency; uint16_t average_vclk_frequency; + uint16_t average_uclk_frequency; + uint16_t average_mpipu_frequency; /* Current clocks */ /* target core frequency [MHz] */ @@ -1125,6 +1133,15 @@ struct gpu_metrics_v3_0 { /* GFXCLK frequency limit enforced on GFX [MHz] */ uint16_t current_gfx_maxfreq; + /* Throttle Residency (ASIC dependent) */ + uint32_t throttle_residency_prochot; + uint32_t throttle_residency_spl; + uint32_t throttle_residency_fppt; + uint32_t throttle_residency_sppt; + uint32_t throttle_residency_thm_core; + uint32_t throttle_residency_thm_gfx; + uint32_t throttle_residency_thm_soc; + /* Metrics table alpha filter time constant [us] */ uint32_t time_filter_alphavalue; }; diff --git a/drivers/gpu/drm/amd/pm/swsmu/inc/amdgpu_smu.h b/drivers/gpu/drm/amd/pm/swsmu/inc/amdgpu_smu.h index 23fa71cafb14..f8b2e6cc2568 100644 --- a/drivers/gpu/drm/amd/pm/swsmu/inc/amdgpu_smu.h +++ b/drivers/gpu/drm/amd/pm/swsmu/inc/amdgpu_smu.h @@ -1408,6 +1408,16 @@ typedef enum { METRICS_PCIE_WIDTH, METRICS_CURR_FANPWM, METRICS_CURR_SOCKETPOWER, + METRICS_AVERAGE_VPECLK, + METRICS_AVERAGE_IPUCLK, + METRICS_AVERAGE_MPIPUCLK, + METRICS_THROTTLER_RESIDENCY_PROCHOT, + METRICS_THROTTLER_RESIDENCY_SPL, + METRICS_THROTTLER_RESIDENCY_FPPT, + METRICS_THROTTLER_RESIDENCY_SPPT, + METRICS_THROTTLER_RESIDENCY_THM_CORE, + METRICS_THROTTLER_RESIDENCY_THM_GFX, + METRICS_THROTTLER_RESIDENCY_THM_SOC, } MetricsMember_t; enum smu_cmn2asic_mapping_type { diff --git a/drivers/gpu/drm/amd/pm/swsmu/inc/pmfw_if/smu14_driver_if_v14_0_0.h b/drivers/gpu/drm/amd/pm/swsmu/inc/pmfw_if/smu14_driver_if_v14_0_0.h index 22f88842a7fd..8f42771e1f0a 100644 --- a/drivers/gpu/drm/amd/pm/swsmu/inc/pmfw_if/smu14_driver_if_v14_0_0.h +++ b/drivers/gpu/drm/amd/pm/swsmu/inc/pmfw_if/smu14_driver_if_v14_0_0.h @@ -27,7 +27,7 @@ // *** IMPORTANT *** // SMU TEAM: Always increment the interface version if // any structure is changed in this file -#define PMFW_DRIVER_IF_VERSION 6 +#define PMFW_DRIVER_IF_VERSION 7 typedef struct { int32_t value; @@ -150,37 +150,50 @@ typedef struct { } DpmClocks_t; typedef struct { - uint16_t CoreFrequency[16]; //Target core frequency [MHz] - uint16_t CorePower[16]; //CAC calculated core power [mW] - uint16_t CoreTemperature[16]; //TSEN measured core temperature [centi-C] - uint16_t GfxTemperature; //TSEN measured GFX temperature [centi-C] - uint16_t SocTemperature; //TSEN measured SOC temperature [centi-C] - uint16_t StapmOpnLimit; //Maximum IRM defined STAPM power limit [mW] - uint16_t StapmCurrentLimit; //Time filtered STAPM power limit [mW] - uint16_t InfrastructureCpuMaxFreq; //CCLK frequency limit enforced on classic cores [MHz] - uint16_t InfrastructureGfxMaxFreq; //GFXCLK frequency limit enforced on GFX [MHz] - uint16_t SkinTemp; //Maximum skin temperature reported by APU and HS2 chassis sensors [centi-C] - uint16_t GfxclkFrequency; //Time filtered target GFXCLK frequency [MHz] - uint16_t FclkFrequency; //Time filtered target FCLK frequency [MHz] - uint16_t GfxActivity; //Time filtered GFX busy % [0-100] - uint16_t SocclkFrequency; //Time filtered target SOCCLK frequency [MHz] - uint16_t VclkFrequency; //Time filtered target VCLK frequency [MHz] - uint16_t VcnActivity; //Time filtered VCN busy % [0-100] - uint16_t VpeclkFrequency; //Time filtered target VPECLK frequency [MHz] - uint16_t IpuclkFrequency; //Time filtered target IPUCLK frequency [MHz] - uint16_t IpuBusy[8]; //Time filtered IPU per-column busy % [0-100] - uint16_t DRAMReads; //Time filtered DRAM read bandwidth [MB/sec] - uint16_t DRAMWrites; //Time filtered DRAM write bandwidth [MB/sec] - uint16_t CoreC0Residency[16]; //Time filtered per-core C0 residency % [0-100] - uint16_t IpuPower; //Time filtered IPU power [mW] - uint32_t ApuPower; //Time filtered APU power [mW] - uint32_t GfxPower; //Time filtered GFX power [mW] - uint32_t dGpuPower; //Time filtered dGPU power [mW] - uint32_t SocketPower; //Time filtered power used for PPT/STAPM [APU+dGPU] [mW] - uint32_t AllCorePower; //Time filtered sum of core power across all cores in the socket [mW] - uint32_t FilterAlphaValue; //Metrics table alpha filter time constant [us] - uint32_t MetricsCounter; //Counter that is incremented on every metrics table update [PM_TIMER cycles] - uint32_t spare[16]; + uint16_t CoreFrequency[16]; //Target core frequency [MHz] + uint16_t CorePower[16]; //CAC calculated core power [mW] + uint16_t CoreTemperature[16]; //TSEN measured core temperature [centi-C] + uint16_t GfxTemperature; //TSEN measured GFX temperature [centi-C] + uint16_t SocTemperature; //TSEN measured SOC temperature [centi-C] + uint16_t StapmOpnLimit; //Maximum IRM defined STAPM power limit [mW] + uint16_t StapmCurrentLimit; //Time filtered STAPM power limit [mW] + uint16_t InfrastructureCpuMaxFreq; //CCLK frequency limit enforced on classic cores [MHz] + uint16_t InfrastructureGfxMaxFreq; //GFXCLK frequency limit enforced on GFX [MHz] + uint16_t SkinTemp; //Maximum skin temperature reported by APU and HS2 chassis sensors [centi-C] + uint16_t GfxclkFrequency; //Time filtered target GFXCLK frequency [MHz] + uint16_t FclkFrequency; //Time filtered target FCLK frequency [MHz] + uint16_t GfxActivity; //Time filtered GFX busy % [0-100] + uint16_t SocclkFrequency; //Time filtered target SOCCLK frequency [MHz] + uint16_t VclkFrequency; //Time filtered target VCLK frequency [MHz] + uint16_t VcnActivity; //Time filtered VCN busy % [0-100] + uint16_t VpeclkFrequency; //Time filtered target VPECLK frequency [MHz] + uint16_t IpuclkFrequency; //Time filtered target IPUCLK frequency [MHz] + uint16_t IpuBusy[8]; //Time filtered IPU per-column busy % [0-100] + uint16_t DRAMReads; //Time filtered DRAM read bandwidth [MB/sec] + uint16_t DRAMWrites; //Time filtered DRAM write bandwidth [MB/sec] + uint16_t CoreC0Residency[16]; //Time filtered per-core C0 residency % [0-100] + uint16_t IpuPower; //Time filtered IPU power [mW] + uint32_t ApuPower; //Time filtered APU power [mW] + uint32_t GfxPower; //Time filtered GFX power [mW] + uint32_t dGpuPower; //Time filtered dGPU power [mW] + uint32_t SocketPower; //Time filtered power used for PPT/STAPM [APU+dGPU] [mW] + uint32_t AllCorePower; //Time filtered sum of core power across all cores in the socket [mW] + uint32_t FilterAlphaValue; //Metrics table alpha filter time constant [us] + uint32_t MetricsCounter; //Counter that is incremented on every metrics table update [PM_TIMER cycles] + uint16_t MemclkFrequency; //Time filtered target MEMCLK frequency [MHz] + uint16_t MpipuclkFrequency; //Time filtered target MPIPUCLK frequency [MHz] + uint16_t IpuReads; //Time filtered IPU read bandwidth [MB/sec] + uint16_t IpuWrites; //Time filtered IPU write bandwidth [MB/sec] + uint32_t ThrottleResidency_PROCHOT; //Counter that is incremented on every metrics table update when PROCHOT was engaged [PM_TIMER cycles] + uint32_t ThrottleResidency_SPL; //Counter that is incremented on every metrics table update when SPL was engaged [PM_TIMER cycles] + uint32_t ThrottleResidency_FPPT; //Counter that is incremented on every metrics table update when fast PPT was engaged [PM_TIMER cycles] + uint32_t ThrottleResidency_SPPT; //Counter that is incremented on every metrics table update when slow PPT was engaged [PM_TIMER cycles] + uint32_t ThrottleResidency_THM_CORE; //Counter that is incremented on every metrics table update when CORE thermal throttling was engaged [PM_TIMER cycles] + uint32_t ThrottleResidency_THM_GFX; //Counter that is incremented on every metrics table update when GFX thermal throttling was engaged [PM_TIMER cycles] + uint32_t ThrottleResidency_THM_SOC; //Counter that is incremented on every metrics table update when SOC thermal throttling was engaged [PM_TIMER cycles] + uint16_t Psys; //Time filtered Psys power [mW] + uint16_t spare1; + uint32_t spare[6]; } SmuMetrics_t; //ISP tile definitions diff --git a/drivers/gpu/drm/amd/pm/swsmu/smu14/smu_v14_0_0_ppt.c b/drivers/gpu/drm/amd/pm/swsmu/smu14/smu_v14_0_0_ppt.c index 03b38c3a9968..94ccdbfd7090 100644 --- a/drivers/gpu/drm/amd/pm/swsmu/smu14/smu_v14_0_0_ppt.c +++ b/drivers/gpu/drm/amd/pm/swsmu/smu14/smu_v14_0_0_ppt.c @@ -246,11 +246,20 @@ static int smu_v14_0_0_get_smu_metrics_data(struct smu_context *smu, *value = 0; break; case METRICS_AVERAGE_UCLK: - *value = 0; + *value = metrics->MemclkFrequency; break; case METRICS_AVERAGE_FCLK: *value = metrics->FclkFrequency; break; + case METRICS_AVERAGE_VPECLK: + *value = metrics->VpeclkFrequency; + break; + case METRICS_AVERAGE_IPUCLK: + *value = metrics->IpuclkFrequency; + break; + case METRICS_AVERAGE_MPIPUCLK: + *value = metrics->MpipuclkFrequency; + break; case METRICS_AVERAGE_GFXACTIVITY: *value = metrics->GfxActivity / 100; break; @@ -270,8 +279,26 @@ static int smu_v14_0_0_get_smu_metrics_data(struct smu_context *smu, *value = metrics->SocTemperature / 100 * SMU_TEMPERATURE_UNITS_PER_CENTIGRADES; break; - case METRICS_THROTTLER_STATUS: - *value = 0; + case METRICS_THROTTLER_RESIDENCY_PROCHOT: + *value = metrics->ThrottleResidency_PROCHOT; + break; + case METRICS_THROTTLER_RESIDENCY_SPL: + *value = metrics->ThrottleResidency_SPL; + break; + case METRICS_THROTTLER_RESIDENCY_FPPT: + *value = metrics->ThrottleResidency_FPPT; + break; + case METRICS_THROTTLER_RESIDENCY_SPPT: + *value = metrics->ThrottleResidency_SPPT; + break; + case METRICS_THROTTLER_RESIDENCY_THM_CORE: + *value = metrics->ThrottleResidency_THM_CORE; + break; + case METRICS_THROTTLER_RESIDENCY_THM_GFX: + *value = metrics->ThrottleResidency_THM_GFX; + break; + case METRICS_THROTTLER_RESIDENCY_THM_SOC: + *value = metrics->ThrottleResidency_THM_SOC; break; case METRICS_VOLTAGE_VDDGFX: *value = 0; @@ -498,6 +525,8 @@ static ssize_t smu_v14_0_0_get_gpu_metrics(struct smu_context *smu, sizeof(uint16_t) * 16); gpu_metrics->average_dram_reads = metrics.DRAMReads; gpu_metrics->average_dram_writes = metrics.DRAMWrites; + gpu_metrics->average_ipu_reads = metrics.IpuReads; + gpu_metrics->average_ipu_writes = metrics.IpuWrites; gpu_metrics->average_socket_power = metrics.SocketPower; gpu_metrics->average_ipu_power = metrics.IpuPower; @@ -505,6 +534,7 @@ static ssize_t smu_v14_0_0_get_gpu_metrics(struct smu_context *smu, gpu_metrics->average_gfx_power = metrics.GfxPower; gpu_metrics->average_dgpu_power = metrics.dGpuPower; gpu_metrics->average_all_core_power = metrics.AllCorePower; + gpu_metrics->average_sys_power = metrics.Psys; memcpy(&gpu_metrics->average_core_power[0], &metrics.CorePower[0], sizeof(uint16_t) * 16); @@ -515,6 +545,8 @@ static ssize_t smu_v14_0_0_get_gpu_metrics(struct smu_context *smu, gpu_metrics->average_fclk_frequency = metrics.FclkFrequency; gpu_metrics->average_vclk_frequency = metrics.VclkFrequency; gpu_metrics->average_ipuclk_frequency = metrics.IpuclkFrequency; + gpu_metrics->average_uclk_frequency = metrics.MemclkFrequency; + gpu_metrics->average_mpipu_frequency = metrics.MpipuclkFrequency; memcpy(&gpu_metrics->current_coreclk[0], &metrics.CoreFrequency[0], @@ -522,6 +554,14 @@ static ssize_t smu_v14_0_0_get_gpu_metrics(struct smu_context *smu, gpu_metrics->current_core_maxfreq = metrics.InfrastructureCpuMaxFreq; gpu_metrics->current_gfx_maxfreq = metrics.InfrastructureGfxMaxFreq; + gpu_metrics->throttle_residency_prochot = metrics.ThrottleResidency_PROCHOT; + gpu_metrics->throttle_residency_spl = metrics.ThrottleResidency_SPL; + gpu_metrics->throttle_residency_fppt = metrics.ThrottleResidency_FPPT; + gpu_metrics->throttle_residency_sppt = metrics.ThrottleResidency_SPPT; + gpu_metrics->throttle_residency_thm_core = metrics.ThrottleResidency_THM_CORE; + gpu_metrics->throttle_residency_thm_gfx = metrics.ThrottleResidency_THM_GFX; + gpu_metrics->throttle_residency_thm_soc = metrics.ThrottleResidency_THM_SOC; + gpu_metrics->time_filter_alphavalue = metrics.FilterAlphaValue; gpu_metrics->system_clock_counter = ktime_get_boottime_ns(); -- cgit v1.2.3 From 37c57631c18661c4c0dc415e75afd143ed89e098 Mon Sep 17 00:00:00 2001 From: Yang Wang Date: Mon, 4 Dec 2023 10:17:57 +0800 Subject: drm/amd/pm: support new mca smu error code decoding support new mca smu error code decoding from smu 85.86.0 for smu v13.0.6 Signed-off-by: Yang Wang Reviewed-by: Hawking Zhang Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu_mca.h | 2 ++ drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0_6_ppt.c | 9 ++++++++- 2 files changed, 10 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_mca.h b/drivers/gpu/drm/amd/amdgpu/amdgpu_mca.h index 2b488fcf2f95..e51e8918e667 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_mca.h +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_mca.h @@ -46,6 +46,8 @@ #define MCA_REG__STATUS__ERRORCODEEXT(x) MCA_REG_FIELD(x, 21, 16) #define MCA_REG__STATUS__ERRORCODE(x) MCA_REG_FIELD(x, 15, 0) +#define MCA_REG__SYND__ERRORINFORMATION(x) MCA_REG_FIELD(x, 17, 0) + enum amdgpu_mca_ip { AMDGPU_MCA_IP_UNKNOW = -1, AMDGPU_MCA_IP_PSP = 0, diff --git a/drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0_6_ppt.c b/drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0_6_ppt.c index 0e5a77c3c2e2..900a2d9e6d85 100644 --- a/drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0_6_ppt.c +++ b/drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0_6_ppt.c @@ -2593,13 +2593,20 @@ static bool mca_gfx_smu_bank_is_valid(const struct mca_ras_info *mca_ras, struct static bool mca_smu_bank_is_valid(const struct mca_ras_info *mca_ras, struct amdgpu_device *adev, enum amdgpu_mca_error_type type, struct mca_bank_entry *entry) { + struct smu_context *smu = adev->powerplay.pp_handle; uint32_t errcode, instlo; instlo = REG_GET_FIELD(entry->regs[MCA_REG_IDX_IPID], MCMP1_IPIDT0, InstanceIdLo); if (instlo != 0x03b30400) return false; - errcode = REG_GET_FIELD(entry->regs[MCA_REG_IDX_STATUS], MCMP1_STATUST0, ErrorCode); + if (!(adev->flags & AMD_IS_APU) && smu->smc_fw_version >= 0x00555600) { + errcode = MCA_REG__SYND__ERRORINFORMATION(entry->regs[MCA_REG_IDX_SYND]); + errcode &= 0xff; + } else { + errcode = REG_GET_FIELD(entry->regs[MCA_REG_IDX_STATUS], MCMP1_STATUST0, ErrorCode); + } + return mca_smu_check_error_code(adev, mca_ras, errcode); } -- cgit v1.2.3 From 0e8af20517197934cc04f8e361c6bbe198c327fd Mon Sep 17 00:00:00 2001 From: Hawking Zhang Date: Mon, 20 Nov 2023 10:43:02 +0800 Subject: drm/amdgpu: Update fw version for boot time error query Boot time error query is not available until fw a10109 Signed-off-by: Hawking Zhang Reviewed-by: Stanley Yang Reviewed-by: Yang Wang Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/psp_v13_0.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/amd/amdgpu/psp_v13_0.c b/drivers/gpu/drm/amd/amdgpu/psp_v13_0.c index 3cf4684d0d3f..5f46877f78cf 100644 --- a/drivers/gpu/drm/amd/amdgpu/psp_v13_0.c +++ b/drivers/gpu/drm/amd/amdgpu/psp_v13_0.c @@ -821,7 +821,7 @@ static int psp_v13_0_query_boot_status(struct psp_context *psp) if (amdgpu_ip_version(adev, MP0_HWIP, 0) != IP_VERSION(13, 0, 6)) return 0; - if (RREG32_SOC15(MP0, 0, regMP0_SMN_C2PMSG_59) < 0x00a10007) + if (RREG32_SOC15(MP0, 0, regMP0_SMN_C2PMSG_59) < 0x00a10109) return 0; for_each_inst(i, inst_mask) { -- cgit v1.2.3 From dbf3850d12baf3ba8a80c302f538d1b01940aef7 Mon Sep 17 00:00:00 2001 From: Yang Wang Date: Mon, 4 Dec 2023 10:44:32 +0800 Subject: drm/amdgpu: optimize the printing order of error data sort error data list to optimize the printing order. Signed-off-by: Yang Wang Reviewed-by: Hawking Zhang Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c index a3dc68e98910..63fb4cd85e53 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c @@ -28,6 +28,7 @@ #include #include #include +#include #include "amdgpu.h" #include "amdgpu_ras.h" @@ -3665,6 +3666,21 @@ static struct ras_err_node *amdgpu_ras_error_node_new(void) return err_node; } +static int ras_err_info_cmp(void *priv, const struct list_head *a, const struct list_head *b) +{ + struct ras_err_node *nodea = container_of(a, struct ras_err_node, node); + struct ras_err_node *nodeb = container_of(b, struct ras_err_node, node); + struct amdgpu_smuio_mcm_config_info *infoa = &nodea->err_info.mcm_info; + struct amdgpu_smuio_mcm_config_info *infob = &nodeb->err_info.mcm_info; + + if (unlikely(infoa->socket_id != infob->socket_id)) + return infoa->socket_id - infob->socket_id; + else + return infoa->die_id - infob->die_id; + + return 0; +} + static struct ras_err_info *amdgpu_ras_error_get_info(struct ras_err_data *err_data, struct amdgpu_smuio_mcm_config_info *mcm_info) { @@ -3682,6 +3698,7 @@ static struct ras_err_info *amdgpu_ras_error_get_info(struct ras_err_data *err_d err_data->err_list_count++; list_add_tail(&err_node->node, &err_data->err_node_list); + list_sort(NULL, &err_data->err_node_list, ras_err_info_cmp); return &err_node->err_info; } -- cgit v1.2.3 From 5b750b22530fe53bf7fd6a30baacd53ada26911b Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 30 Nov 2023 17:34:07 -0500 Subject: drm/amd/display: Increase frame warning limit with KASAN or KCSAN in dml Does the same thing as: commit 6740ec97bcdb ("drm/amd/display: Increase frame warning limit with KASAN or KCSAN in dml2") Reviewed-by: Harry Wentland Reported-by: kernel test robot Closes: https://lore.kernel.org/oe-kbuild-all/202311302107.hUDXVyWT-lkp@intel.com/ Fixes: 67e38874b85b ("drm/amd/display: Increase num voltage states to 40") Signed-off-by: Alex Deucher Cc: Alvin Lee Cc: Hamza Mahfooz Cc: Samson Tam Cc: Harry Wentland --- drivers/gpu/drm/amd/display/dc/dml/Makefile | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/gpu/drm/amd/display/dc/dml/Makefile b/drivers/gpu/drm/amd/display/dc/dml/Makefile index ea7d60f9a9b4..6042a5a6a44f 100644 --- a/drivers/gpu/drm/amd/display/dc/dml/Makefile +++ b/drivers/gpu/drm/amd/display/dc/dml/Makefile @@ -61,8 +61,12 @@ endif endif ifneq ($(CONFIG_FRAME_WARN),0) +ifeq ($(filter y,$(CONFIG_KASAN)$(CONFIG_KCSAN)),y) +frame_warn_flag := -Wframe-larger-than=3072 +else frame_warn_flag := -Wframe-larger-than=2048 endif +endif CFLAGS_$(AMDDALPATH)/dc/dml/display_mode_lib.o := $(dml_ccflags) CFLAGS_$(AMDDALPATH)/dc/dml/display_mode_vba.o := $(dml_ccflags) -- cgit v1.2.3 From 6fce23a4d8c5f93bf80b7f122449fbb97f1e40dd Mon Sep 17 00:00:00 2001 From: Lijo Lazar Date: Wed, 29 Nov 2023 18:06:55 +0530 Subject: drm/amdgpu: Restrict extended wait to PSP v13.0.6 Only PSPv13.0.6 SOCs take a longer time to reach steady state. Other PSPv13 based SOCs don't need extended wait. Also, reduce PSPv13.0.6 wait time. Cc: stable@vger.kernel.org Fixes: fc5988907156 ("drm/amdgpu: update retry times for psp vmbx wait") Fixes: d8c1925ba8cd ("drm/amdgpu: update retry times for psp BL wait") Link: https://lore.kernel.org/amd-gfx/34dd4c66-f7bf-44aa-af8f-c82889dd652c@amd.com/ Signed-off-by: Lijo Lazar Reviewed-by: Asad Kamal Reviewed-by: Mario Limonciello Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/psp_v13_0.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/amd/amdgpu/psp_v13_0.c b/drivers/gpu/drm/amd/amdgpu/psp_v13_0.c index 5f46877f78cf..df1844d0800f 100644 --- a/drivers/gpu/drm/amd/amdgpu/psp_v13_0.c +++ b/drivers/gpu/drm/amd/amdgpu/psp_v13_0.c @@ -60,7 +60,7 @@ MODULE_FIRMWARE("amdgpu/psp_14_0_0_ta.bin"); #define GFX_CMD_USB_PD_USE_LFB 0x480 /* Retry times for vmbx ready wait */ -#define PSP_VMBX_POLLING_LIMIT 20000 +#define PSP_VMBX_POLLING_LIMIT 3000 /* VBIOS gfl defines */ #define MBOX_READY_MASK 0x80000000 @@ -161,14 +161,18 @@ static int psp_v13_0_wait_for_vmbx_ready(struct psp_context *psp) static int psp_v13_0_wait_for_bootloader(struct psp_context *psp) { struct amdgpu_device *adev = psp->adev; - int retry_loop, ret; + int retry_loop, retry_cnt, ret; + retry_cnt = + (amdgpu_ip_version(adev, MP0_HWIP, 0) == IP_VERSION(13, 0, 6)) ? + PSP_VMBX_POLLING_LIMIT : + 10; /* Wait for bootloader to signify that it is ready having bit 31 of * C2PMSG_35 set to 1. All other bits are expected to be cleared. * If there is an error in processing command, bits[7:0] will be set. * This is applicable for PSP v13.0.6 and newer. */ - for (retry_loop = 0; retry_loop < PSP_VMBX_POLLING_LIMIT; retry_loop++) { + for (retry_loop = 0; retry_loop < retry_cnt; retry_loop++) { ret = psp_wait_for( psp, SOC15_REG_OFFSET(MP0, 0, regMP0_SMN_C2PMSG_35), 0x80000000, 0xffffffff, false); -- cgit v1.2.3 From 81577503efb49f4ad76af22f9941d72900ef4aab Mon Sep 17 00:00:00 2001 From: Lijo Lazar Date: Wed, 29 Nov 2023 12:37:34 +0530 Subject: drm/amdgpu: Add NULL checks for function pointers Check if function is implemented before making the call. Signed-off-by: Lijo Lazar Reviewed-by: Hawking Zhang Acked-by: Alex Deucher Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/soc15.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/amd/amdgpu/soc15.c b/drivers/gpu/drm/amd/amdgpu/soc15.c index c82776e5e9aa..edd6344d1e2b 100644 --- a/drivers/gpu/drm/amd/amdgpu/soc15.c +++ b/drivers/gpu/drm/amd/amdgpu/soc15.c @@ -1423,9 +1423,11 @@ static void soc15_common_get_clockgating_state(void *handle, u64 *flags) if (amdgpu_sriov_vf(adev)) *flags = 0; - adev->nbio.funcs->get_clockgating_state(adev, flags); + if (adev->nbio.funcs && adev->nbio.funcs->get_clockgating_state) + adev->nbio.funcs->get_clockgating_state(adev, flags); - adev->hdp.funcs->get_clock_gating_state(adev, flags); + if (adev->hdp.funcs && adev->hdp.funcs->get_clock_gating_state) + adev->hdp.funcs->get_clock_gating_state(adev, flags); if (amdgpu_ip_version(adev, MP0_HWIP, 0) != IP_VERSION(13, 0, 2)) { /* AMD_CG_SUPPORT_DRM_MGCG */ @@ -1440,9 +1442,11 @@ static void soc15_common_get_clockgating_state(void *handle, u64 *flags) } /* AMD_CG_SUPPORT_ROM_MGCG */ - adev->smuio.funcs->get_clock_gating_state(adev, flags); + if (adev->smuio.funcs && adev->smuio.funcs->get_clock_gating_state) + adev->smuio.funcs->get_clock_gating_state(adev, flags); - adev->df.funcs->get_clockgating_state(adev, flags); + if (adev->df.funcs && adev->df.funcs->get_clockgating_state) + adev->df.funcs->get_clockgating_state(adev, flags); } static int soc15_common_set_powergating_state(void *handle, -- cgit v1.2.3 From 555e39f0270b1a1c51224044be9922b4c3a4c27f Mon Sep 17 00:00:00 2001 From: Lijo Lazar Date: Thu, 30 Nov 2023 15:58:21 +0530 Subject: drm/amdgpu: Update HDP 4.4.2 clock gating flags HDP 4.4.2 clockgating is enabled by default, update the flags accordingly. Signed-off-by: Lijo Lazar Reviewed-by: Hawking Zhang Acked-by: Alex Deucher Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/hdp_v4_0.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/gpu/drm/amd/amdgpu/hdp_v4_0.c b/drivers/gpu/drm/amd/amdgpu/hdp_v4_0.c index 49e934975719..4db6bb73ead4 100644 --- a/drivers/gpu/drm/amd/amdgpu/hdp_v4_0.c +++ b/drivers/gpu/drm/amd/amdgpu/hdp_v4_0.c @@ -129,6 +129,11 @@ static void hdp_v4_0_get_clockgating_state(struct amdgpu_device *adev, { int data; + if (amdgpu_ip_version(adev, HDP_HWIP, 0) == IP_VERSION(4, 4, 2)) { + /* Default enabled */ + *flags |= AMD_CG_SUPPORT_HDP_MGCG; + return; + } /* AMD_CG_SUPPORT_HDP_LS */ data = RREG32(SOC15_REG_OFFSET(HDP, 0, mmHDP_MEM_POWER_LS)); if (data & HDP_MEM_POWER_LS__LS_ENABLE_MASK) -- cgit v1.2.3 From 27b024a88acba17c8e3a71ff4fd425064851e3b7 Mon Sep 17 00:00:00 2001 From: Lijo Lazar Date: Thu, 30 Nov 2023 16:35:58 +0530 Subject: drm/amdgpu: Avoid querying DRM MGCG status MP0 v13.0.6 SOCs don't support DRM MGCG. Signed-off-by: Lijo Lazar Reviewed-by: Hawking Zhang Acked-by: Alex Deucher Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/soc15.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/amd/amdgpu/soc15.c b/drivers/gpu/drm/amd/amdgpu/soc15.c index edd6344d1e2b..51342809af03 100644 --- a/drivers/gpu/drm/amd/amdgpu/soc15.c +++ b/drivers/gpu/drm/amd/amdgpu/soc15.c @@ -1429,7 +1429,8 @@ static void soc15_common_get_clockgating_state(void *handle, u64 *flags) if (adev->hdp.funcs && adev->hdp.funcs->get_clock_gating_state) adev->hdp.funcs->get_clock_gating_state(adev, flags); - if (amdgpu_ip_version(adev, MP0_HWIP, 0) != IP_VERSION(13, 0, 2)) { + if ((amdgpu_ip_version(adev, MP0_HWIP, 0) != IP_VERSION(13, 0, 2)) && + (amdgpu_ip_version(adev, MP0_HWIP, 0) != IP_VERSION(13, 0, 6))) { /* AMD_CG_SUPPORT_DRM_MGCG */ data = RREG32(SOC15_REG_OFFSET(MP0, 0, mmMP0_MISC_CGTT_CTRL0)); if (!(data & 0x01000000)) -- cgit v1.2.3 From dab96d8b61aab1a4f99d0b86964a6c40e7bb1756 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Wed, 29 Nov 2023 15:44:25 -0500 Subject: drm/amdgpu: fix buffer funcs setting order on suspend We need to disable this after the last eviction call, but before we disable the SDMA IP. Fixes: b70438004a14 ("drm/amdgpu: move buffer funcs setting up a level") Link: https://lore.kernel.org/r/87edgv4x3i.fsf@vps.thesusis.net Reviewed-by: Luben Tuikov Tested-by: Phillip Susi Signed-off-by: Alex Deucher Cc: Phillip Susi Cc: Luben Tuikov --- drivers/gpu/drm/amd/amdgpu/amdgpu_device.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c index 1cc1ae2743c1..1f64d8cbb14d 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c @@ -4527,6 +4527,8 @@ int amdgpu_device_suspend(struct drm_device *dev, bool fbcon) if (r) return r; + amdgpu_ttm_set_buffer_funcs_status(adev, false); + amdgpu_fence_driver_hw_fini(adev); amdgpu_device_ip_suspend_phase2(adev); -- cgit v1.2.3 From f63e1164b90b385cd832ff0fdfcfa76c3cc15436 Mon Sep 17 00:00:00 2001 From: Boris Burkov Date: Fri, 1 Dec 2023 13:00:09 -0800 Subject: btrfs: free qgroup reserve when ORDERED_IOERR is set An ordered extent completing is a critical moment in qgroup reserve handling, as the ownership of the reservation is handed off from the ordered extent to the delayed ref. In the happy path we release (unlock) but do not free (decrement counter) the reservation, and the delayed ref drives the free. However, on an error, we don't create a delayed ref, since there is no ref to add. Therefore, free on the error path. CC: stable@vger.kernel.org # 6.1+ Reviewed-by: Qu Wenruo Signed-off-by: Boris Burkov Signed-off-by: David Sterba --- fs/btrfs/ordered-data.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/fs/btrfs/ordered-data.c b/fs/btrfs/ordered-data.c index 574e8a55e24a..8620ff402de4 100644 --- a/fs/btrfs/ordered-data.c +++ b/fs/btrfs/ordered-data.c @@ -599,7 +599,9 @@ void btrfs_remove_ordered_extent(struct btrfs_inode *btrfs_inode, release = entry->disk_num_bytes; else release = entry->num_bytes; - btrfs_delalloc_release_metadata(btrfs_inode, release, false); + btrfs_delalloc_release_metadata(btrfs_inode, release, + test_bit(BTRFS_ORDERED_IOERR, + &entry->flags)); } percpu_counter_add_batch(&fs_info->ordered_bytes, -entry->num_bytes, -- cgit v1.2.3 From 9e65bfca24cf1d77e4a5c7a170db5867377b3fe7 Mon Sep 17 00:00:00 2001 From: Boris Burkov Date: Fri, 1 Dec 2023 13:00:10 -0800 Subject: btrfs: fix qgroup_free_reserved_data int overflow The reserved data counter and input parameter is a u64, but we inadvertently accumulate it in an int. Overflowing that int results in freeing the wrong amount of data and breaking reserve accounting. Unfortunately, this overflow rot spreads from there, as the qgroup release/free functions rely on returning an int to take advantage of negative values for error codes. Therefore, the full fix is to return the "released" or "freed" amount by a u64 argument and to return 0 or negative error code via the return value. Most of the call sites simply ignore the return value, though some of them handle the error and count the returned bytes. Change all of them accordingly. CC: stable@vger.kernel.org # 6.1+ Reviewed-by: Qu Wenruo Signed-off-by: Boris Burkov Reviewed-by: David Sterba Signed-off-by: David Sterba --- fs/btrfs/delalloc-space.c | 2 +- fs/btrfs/file.c | 2 +- fs/btrfs/inode.c | 16 ++++++++-------- fs/btrfs/ordered-data.c | 7 ++++--- fs/btrfs/qgroup.c | 25 +++++++++++++++---------- fs/btrfs/qgroup.h | 4 ++-- 6 files changed, 31 insertions(+), 25 deletions(-) diff --git a/fs/btrfs/delalloc-space.c b/fs/btrfs/delalloc-space.c index 51453d4928fa..2833e8ef4c09 100644 --- a/fs/btrfs/delalloc-space.c +++ b/fs/btrfs/delalloc-space.c @@ -199,7 +199,7 @@ void btrfs_free_reserved_data_space(struct btrfs_inode *inode, start = round_down(start, fs_info->sectorsize); btrfs_free_reserved_data_space_noquota(fs_info, len); - btrfs_qgroup_free_data(inode, reserved, start, len); + btrfs_qgroup_free_data(inode, reserved, start, len, NULL); } /* diff --git a/fs/btrfs/file.c b/fs/btrfs/file.c index 92419cb8508a..33587c7ac859 100644 --- a/fs/btrfs/file.c +++ b/fs/btrfs/file.c @@ -3190,7 +3190,7 @@ static long btrfs_fallocate(struct file *file, int mode, qgroup_reserved -= range->len; } else if (qgroup_reserved > 0) { btrfs_qgroup_free_data(BTRFS_I(inode), data_reserved, - range->start, range->len); + range->start, range->len, NULL); qgroup_reserved -= range->len; } list_del(&range->list); diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index 137c4824ff91..b9a31df58744 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -688,7 +688,7 @@ out: * And at reserve time, it's always aligned to page size, so * just free one page here. */ - btrfs_qgroup_free_data(inode, NULL, 0, PAGE_SIZE); + btrfs_qgroup_free_data(inode, NULL, 0, PAGE_SIZE, NULL); btrfs_free_path(path); btrfs_end_transaction(trans); return ret; @@ -5132,7 +5132,7 @@ static void evict_inode_truncate_pages(struct inode *inode) */ if (state_flags & EXTENT_DELALLOC) btrfs_qgroup_free_data(BTRFS_I(inode), NULL, start, - end - start + 1); + end - start + 1, NULL); clear_extent_bit(io_tree, start, end, EXTENT_CLEAR_ALL_BITS | EXTENT_DO_ACCOUNTING, @@ -8055,7 +8055,7 @@ next: * reserved data space. * Since the IO will never happen for this page. */ - btrfs_qgroup_free_data(inode, NULL, cur, range_end + 1 - cur); + btrfs_qgroup_free_data(inode, NULL, cur, range_end + 1 - cur, NULL); if (!inode_evicting) { clear_extent_bit(tree, cur, range_end, EXTENT_LOCKED | EXTENT_DELALLOC | EXTENT_UPTODATE | @@ -9487,7 +9487,7 @@ static struct btrfs_trans_handle *insert_prealloc_file_extent( struct btrfs_path *path; u64 start = ins->objectid; u64 len = ins->offset; - int qgroup_released; + u64 qgroup_released = 0; int ret; memset(&stack_fi, 0, sizeof(stack_fi)); @@ -9500,9 +9500,9 @@ static struct btrfs_trans_handle *insert_prealloc_file_extent( btrfs_set_stack_file_extent_compression(&stack_fi, BTRFS_COMPRESS_NONE); /* Encryption and other encoding is reserved and all 0 */ - qgroup_released = btrfs_qgroup_release_data(inode, file_offset, len); - if (qgroup_released < 0) - return ERR_PTR(qgroup_released); + ret = btrfs_qgroup_release_data(inode, file_offset, len, &qgroup_released); + if (ret < 0) + return ERR_PTR(ret); if (trans) { ret = insert_reserved_file_extent(trans, inode, @@ -10397,7 +10397,7 @@ out_delalloc_release: btrfs_delalloc_release_metadata(inode, disk_num_bytes, ret < 0); out_qgroup_free_data: if (ret < 0) - btrfs_qgroup_free_data(inode, data_reserved, start, num_bytes); + btrfs_qgroup_free_data(inode, data_reserved, start, num_bytes, NULL); out_free_data_space: /* * If btrfs_reserve_extent() succeeded, then we already decremented diff --git a/fs/btrfs/ordered-data.c b/fs/btrfs/ordered-data.c index 8620ff402de4..a82e1417c4d2 100644 --- a/fs/btrfs/ordered-data.c +++ b/fs/btrfs/ordered-data.c @@ -152,11 +152,12 @@ static struct btrfs_ordered_extent *alloc_ordered_extent( { struct btrfs_ordered_extent *entry; int ret; + u64 qgroup_rsv = 0; if (flags & ((1 << BTRFS_ORDERED_NOCOW) | (1 << BTRFS_ORDERED_PREALLOC))) { /* For nocow write, we can release the qgroup rsv right now */ - ret = btrfs_qgroup_free_data(inode, NULL, file_offset, num_bytes); + ret = btrfs_qgroup_free_data(inode, NULL, file_offset, num_bytes, &qgroup_rsv); if (ret < 0) return ERR_PTR(ret); } else { @@ -164,7 +165,7 @@ static struct btrfs_ordered_extent *alloc_ordered_extent( * The ordered extent has reserved qgroup space, release now * and pass the reserved number for qgroup_record to free. */ - ret = btrfs_qgroup_release_data(inode, file_offset, num_bytes); + ret = btrfs_qgroup_release_data(inode, file_offset, num_bytes, &qgroup_rsv); if (ret < 0) return ERR_PTR(ret); } @@ -182,7 +183,7 @@ static struct btrfs_ordered_extent *alloc_ordered_extent( entry->inode = igrab(&inode->vfs_inode); entry->compress_type = compress_type; entry->truncated_len = (u64)-1; - entry->qgroup_rsv = ret; + entry->qgroup_rsv = qgroup_rsv; entry->flags = flags; refcount_set(&entry->refs, 1); init_waitqueue_head(&entry->wait); diff --git a/fs/btrfs/qgroup.c b/fs/btrfs/qgroup.c index ce446d9d7f23..a953c16c7eb8 100644 --- a/fs/btrfs/qgroup.c +++ b/fs/btrfs/qgroup.c @@ -4057,13 +4057,14 @@ int btrfs_qgroup_reserve_data(struct btrfs_inode *inode, /* Free ranges specified by @reserved, normally in error path */ static int qgroup_free_reserved_data(struct btrfs_inode *inode, - struct extent_changeset *reserved, u64 start, u64 len) + struct extent_changeset *reserved, + u64 start, u64 len, u64 *freed_ret) { struct btrfs_root *root = inode->root; struct ulist_node *unode; struct ulist_iterator uiter; struct extent_changeset changeset; - int freed = 0; + u64 freed = 0; int ret; extent_changeset_init(&changeset); @@ -4104,7 +4105,9 @@ static int qgroup_free_reserved_data(struct btrfs_inode *inode, } btrfs_qgroup_free_refroot(root->fs_info, root->root_key.objectid, freed, BTRFS_QGROUP_RSV_DATA); - ret = freed; + if (freed_ret) + *freed_ret = freed; + ret = 0; out: extent_changeset_release(&changeset); return ret; @@ -4112,7 +4115,7 @@ out: static int __btrfs_qgroup_release_data(struct btrfs_inode *inode, struct extent_changeset *reserved, u64 start, u64 len, - int free) + u64 *released, int free) { struct extent_changeset changeset; int trace_op = QGROUP_RELEASE; @@ -4128,7 +4131,7 @@ static int __btrfs_qgroup_release_data(struct btrfs_inode *inode, /* In release case, we shouldn't have @reserved */ WARN_ON(!free && reserved); if (free && reserved) - return qgroup_free_reserved_data(inode, reserved, start, len); + return qgroup_free_reserved_data(inode, reserved, start, len, released); extent_changeset_init(&changeset); ret = clear_record_extent_bits(&inode->io_tree, start, start + len -1, EXTENT_QGROUP_RESERVED, &changeset); @@ -4143,7 +4146,8 @@ static int __btrfs_qgroup_release_data(struct btrfs_inode *inode, btrfs_qgroup_free_refroot(inode->root->fs_info, inode->root->root_key.objectid, changeset.bytes_changed, BTRFS_QGROUP_RSV_DATA); - ret = changeset.bytes_changed; + if (released) + *released = changeset.bytes_changed; out: extent_changeset_release(&changeset); return ret; @@ -4162,9 +4166,10 @@ out: * NOTE: This function may sleep for memory allocation. */ int btrfs_qgroup_free_data(struct btrfs_inode *inode, - struct extent_changeset *reserved, u64 start, u64 len) + struct extent_changeset *reserved, + u64 start, u64 len, u64 *freed) { - return __btrfs_qgroup_release_data(inode, reserved, start, len, 1); + return __btrfs_qgroup_release_data(inode, reserved, start, len, freed, 1); } /* @@ -4182,9 +4187,9 @@ int btrfs_qgroup_free_data(struct btrfs_inode *inode, * * NOTE: This function may sleep for memory allocation. */ -int btrfs_qgroup_release_data(struct btrfs_inode *inode, u64 start, u64 len) +int btrfs_qgroup_release_data(struct btrfs_inode *inode, u64 start, u64 len, u64 *released) { - return __btrfs_qgroup_release_data(inode, NULL, start, len, 0); + return __btrfs_qgroup_release_data(inode, NULL, start, len, released, 0); } static void add_root_meta_rsv(struct btrfs_root *root, int num_bytes, diff --git a/fs/btrfs/qgroup.h b/fs/btrfs/qgroup.h index 855a4f978761..15b485506104 100644 --- a/fs/btrfs/qgroup.h +++ b/fs/btrfs/qgroup.h @@ -358,10 +358,10 @@ int btrfs_verify_qgroup_counts(struct btrfs_fs_info *fs_info, u64 qgroupid, /* New io_tree based accurate qgroup reserve API */ int btrfs_qgroup_reserve_data(struct btrfs_inode *inode, struct extent_changeset **reserved, u64 start, u64 len); -int btrfs_qgroup_release_data(struct btrfs_inode *inode, u64 start, u64 len); +int btrfs_qgroup_release_data(struct btrfs_inode *inode, u64 start, u64 len, u64 *released); int btrfs_qgroup_free_data(struct btrfs_inode *inode, struct extent_changeset *reserved, u64 start, - u64 len); + u64 len, u64 *freed); int btrfs_qgroup_reserve_meta(struct btrfs_root *root, int num_bytes, enum btrfs_qgroup_rsv_type type, bool enforce); int __btrfs_qgroup_reserve_meta(struct btrfs_root *root, int num_bytes, -- cgit v1.2.3 From b321a52cce062ec7ed385333a33905d22159ce36 Mon Sep 17 00:00:00 2001 From: Boris Burkov Date: Fri, 1 Dec 2023 13:00:11 -0800 Subject: btrfs: free qgroup pertrans reserve on transaction abort If we abort a transaction, we never run the code that frees the pertrans qgroup reservation. This results in warnings on unmount as that reservation has been leaked. The leak isn't a huge issue since the fs is read-only, but it's better to clean it up when we know we can/should. Do it during the cleanup_transaction step of aborting. CC: stable@vger.kernel.org # 5.15+ Reviewed-by: Qu Wenruo Signed-off-by: Boris Burkov Signed-off-by: David Sterba --- fs/btrfs/disk-io.c | 28 ++++++++++++++++++++++++++++ fs/btrfs/qgroup.c | 5 +++-- fs/btrfs/transaction.c | 2 -- fs/btrfs/transaction.h | 3 +++ 4 files changed, 34 insertions(+), 4 deletions(-) diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c index bbcc3df77646..62cb97f7c94f 100644 --- a/fs/btrfs/disk-io.c +++ b/fs/btrfs/disk-io.c @@ -4799,6 +4799,32 @@ void btrfs_cleanup_dirty_bgs(struct btrfs_transaction *cur_trans, } } +static void btrfs_free_all_qgroup_pertrans(struct btrfs_fs_info *fs_info) +{ + struct btrfs_root *gang[8]; + int i; + int ret; + + spin_lock(&fs_info->fs_roots_radix_lock); + while (1) { + ret = radix_tree_gang_lookup_tag(&fs_info->fs_roots_radix, + (void **)gang, 0, + ARRAY_SIZE(gang), + BTRFS_ROOT_TRANS_TAG); + if (ret == 0) + break; + for (i = 0; i < ret; i++) { + struct btrfs_root *root = gang[i]; + + btrfs_qgroup_free_meta_all_pertrans(root); + radix_tree_tag_clear(&fs_info->fs_roots_radix, + (unsigned long)root->root_key.objectid, + BTRFS_ROOT_TRANS_TAG); + } + } + spin_unlock(&fs_info->fs_roots_radix_lock); +} + void btrfs_cleanup_one_transaction(struct btrfs_transaction *cur_trans, struct btrfs_fs_info *fs_info) { @@ -4827,6 +4853,8 @@ void btrfs_cleanup_one_transaction(struct btrfs_transaction *cur_trans, EXTENT_DIRTY); btrfs_destroy_pinned_extent(fs_info, &cur_trans->pinned_extents); + btrfs_free_all_qgroup_pertrans(fs_info); + cur_trans->state =TRANS_STATE_COMPLETED; wake_up(&cur_trans->commit_wait); } diff --git a/fs/btrfs/qgroup.c b/fs/btrfs/qgroup.c index a953c16c7eb8..daec90342dad 100644 --- a/fs/btrfs/qgroup.c +++ b/fs/btrfs/qgroup.c @@ -4337,8 +4337,9 @@ static void qgroup_convert_meta(struct btrfs_fs_info *fs_info, u64 ref_root, qgroup_rsv_release(fs_info, qgroup, num_bytes, BTRFS_QGROUP_RSV_META_PREALLOC); - qgroup_rsv_add(fs_info, qgroup, num_bytes, - BTRFS_QGROUP_RSV_META_PERTRANS); + if (!sb_rdonly(fs_info->sb)) + qgroup_rsv_add(fs_info, qgroup, num_bytes, + BTRFS_QGROUP_RSV_META_PERTRANS); list_for_each_entry(glist, &qgroup->groups, next_group) qgroup_iterator_add(&qgroup_list, glist->group); diff --git a/fs/btrfs/transaction.c b/fs/btrfs/transaction.c index 7af9665bebae..b5aa83b7345a 100644 --- a/fs/btrfs/transaction.c +++ b/fs/btrfs/transaction.c @@ -37,8 +37,6 @@ static struct kmem_cache *btrfs_trans_handle_cachep; -#define BTRFS_ROOT_TRANS_TAG 0 - /* * Transaction states and transitions * diff --git a/fs/btrfs/transaction.h b/fs/btrfs/transaction.h index 18c4f6e83b78..2bf8bbdfd0b3 100644 --- a/fs/btrfs/transaction.h +++ b/fs/btrfs/transaction.h @@ -12,6 +12,9 @@ #include "ctree.h" #include "misc.h" +/* Radix-tree tag for roots that are part of the trasaction. */ +#define BTRFS_ROOT_TRANS_TAG 0 + enum btrfs_trans_state { TRANS_STATE_RUNNING, TRANS_STATE_COMMIT_PREP, -- cgit v1.2.3 From a86805504b88f636a6458520d85afdf0634e3c6b Mon Sep 17 00:00:00 2001 From: Boris Burkov Date: Fri, 1 Dec 2023 13:00:12 -0800 Subject: btrfs: don't clear qgroup reserved bit in release_folio The EXTENT_QGROUP_RESERVED bit is used to "lock" regions of the file for duplicate reservations. That is two writes to that range in one transaction shouldn't create two reservations, as the reservation will only be freed once when the write finally goes down. Therefore, it is never OK to clear that bit without freeing the associated qgroup reserve. At this point, we don't want to be freeing the reserve, so mask off the bit. CC: stable@vger.kernel.org # 5.15+ Reviewed-by: Qu Wenruo Signed-off-by: Boris Burkov Signed-off-by: David Sterba --- fs/btrfs/extent_io.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/fs/btrfs/extent_io.c b/fs/btrfs/extent_io.c index e6230a6ffa98..8f724c54fc8e 100644 --- a/fs/btrfs/extent_io.c +++ b/fs/btrfs/extent_io.c @@ -2302,7 +2302,8 @@ static int try_release_extent_state(struct extent_io_tree *tree, ret = 0; } else { u32 clear_bits = ~(EXTENT_LOCKED | EXTENT_NODATASUM | - EXTENT_DELALLOC_NEW | EXTENT_CTLBITS); + EXTENT_DELALLOC_NEW | EXTENT_CTLBITS | + EXTENT_QGROUP_RESERVED); /* * At this point we can safely clear everything except the -- cgit v1.2.3 From e85a0adacf170634878fffcbf34b725aff3f49ed Mon Sep 17 00:00:00 2001 From: Boris Burkov Date: Fri, 1 Dec 2023 13:00:13 -0800 Subject: btrfs: ensure releasing squota reserve on head refs A reservation goes through a 3 step lifetime: - generated during delalloc - released/counted by ordered_extent allocation - freed by running delayed ref That third step depends on must_insert_reserved on the head ref, so the head ref with that field set owns the reservation. Once you prepare to run the head ref, must_insert_reserved is unset, which means that running the ref must free the reservation, whether or not it succeeds, or else the reservation is leaked. That results in either a risk of spurious ENOSPC if the fs stays writeable or a warning on unmount if it is readonly. The existing squota code was aware of these invariants, but missed a few cases. Improve it by adding a helper function to use in the cleanup paths and call it from the existing early returns in running delayed refs. This also simplifies btrfs_record_squota_delta and struct btrfs_quota_delta. This fixes (or at least improves the reliability of) generic/475 with "mkfs -O squota". On my machine, that test failed ~4/10 times without this patch and passed 100/100 times with it. Signed-off-by: Boris Burkov Signed-off-by: David Sterba --- fs/btrfs/extent-tree.c | 48 ++++++++++++++++++++++++++++++++++-------------- fs/btrfs/qgroup.c | 14 +++++++++++--- fs/btrfs/qgroup.h | 3 +-- 3 files changed, 46 insertions(+), 19 deletions(-) diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c index 0455935ff558..01423670bc8a 100644 --- a/fs/btrfs/extent-tree.c +++ b/fs/btrfs/extent-tree.c @@ -1547,6 +1547,23 @@ out: return ret; } +static void free_head_ref_squota_rsv(struct btrfs_fs_info *fs_info, + struct btrfs_delayed_ref_head *href) +{ + u64 root = href->owning_root; + + /* + * Don't check must_insert_reserved, as this is called from contexts + * where it has already been unset. + */ + if (btrfs_qgroup_mode(fs_info) != BTRFS_QGROUP_MODE_SIMPLE || + !href->is_data || !is_fstree(root)) + return; + + btrfs_qgroup_free_refroot(fs_info, root, href->reserved_bytes, + BTRFS_QGROUP_RSV_DATA); +} + static int run_delayed_data_ref(struct btrfs_trans_handle *trans, struct btrfs_delayed_ref_head *href, struct btrfs_delayed_ref_node *node, @@ -1569,7 +1586,6 @@ static int run_delayed_data_ref(struct btrfs_trans_handle *trans, struct btrfs_squota_delta delta = { .root = href->owning_root, .num_bytes = node->num_bytes, - .rsv_bytes = href->reserved_bytes, .is_data = true, .is_inc = true, .generation = trans->transid, @@ -1586,11 +1602,9 @@ static int run_delayed_data_ref(struct btrfs_trans_handle *trans, flags, ref->objectid, ref->offset, &key, node->ref_mod, href->owning_root); + free_head_ref_squota_rsv(trans->fs_info, href); if (!ret) ret = btrfs_record_squota_delta(trans->fs_info, &delta); - else - btrfs_qgroup_free_refroot(trans->fs_info, delta.root, - delta.rsv_bytes, BTRFS_QGROUP_RSV_DATA); } else if (node->action == BTRFS_ADD_DELAYED_REF) { ret = __btrfs_inc_extent_ref(trans, node, parent, ref->root, ref->objectid, ref->offset, @@ -1742,7 +1756,6 @@ static int run_delayed_tree_ref(struct btrfs_trans_handle *trans, struct btrfs_squota_delta delta = { .root = href->owning_root, .num_bytes = fs_info->nodesize, - .rsv_bytes = 0, .is_data = false, .is_inc = true, .generation = trans->transid, @@ -1774,8 +1787,10 @@ static int run_one_delayed_ref(struct btrfs_trans_handle *trans, int ret = 0; if (TRANS_ABORTED(trans)) { - if (insert_reserved) + if (insert_reserved) { btrfs_pin_extent(trans, node->bytenr, node->num_bytes, 1); + free_head_ref_squota_rsv(trans->fs_info, href); + } return 0; } @@ -1871,6 +1886,8 @@ u64 btrfs_cleanup_ref_head_accounting(struct btrfs_fs_info *fs_info, struct btrfs_delayed_ref_root *delayed_refs, struct btrfs_delayed_ref_head *head) { + u64 ret = 0; + /* * We had csum deletions accounted for in our delayed refs rsv, we need * to drop the csum leaves for this update from our delayed_refs_rsv. @@ -1885,14 +1902,13 @@ u64 btrfs_cleanup_ref_head_accounting(struct btrfs_fs_info *fs_info, btrfs_delayed_refs_rsv_release(fs_info, 0, nr_csums); - return btrfs_calc_delayed_ref_csum_bytes(fs_info, nr_csums); + ret = btrfs_calc_delayed_ref_csum_bytes(fs_info, nr_csums); } - if (btrfs_qgroup_mode(fs_info) == BTRFS_QGROUP_MODE_SIMPLE && - head->must_insert_reserved && head->is_data) - btrfs_qgroup_free_refroot(fs_info, head->owning_root, - head->reserved_bytes, BTRFS_QGROUP_RSV_DATA); + /* must_insert_reserved can be set only if we didn't run the head ref. */ + if (head->must_insert_reserved) + free_head_ref_squota_rsv(fs_info, head); - return 0; + return ret; } static int cleanup_ref_head(struct btrfs_trans_handle *trans, @@ -2033,6 +2049,12 @@ static int btrfs_run_delayed_refs_for_head(struct btrfs_trans_handle *trans, * spin lock. */ must_insert_reserved = locked_ref->must_insert_reserved; + /* + * Unsetting this on the head ref relinquishes ownership of + * the rsv_bytes, so it is critical that every possible code + * path from here forward frees all reserves including qgroup + * reserve. + */ locked_ref->must_insert_reserved = false; extent_op = locked_ref->extent_op; @@ -3292,7 +3314,6 @@ static int __btrfs_free_extent(struct btrfs_trans_handle *trans, struct btrfs_squota_delta delta = { .root = delayed_ref_root, .num_bytes = num_bytes, - .rsv_bytes = 0, .is_data = is_data, .is_inc = false, .generation = btrfs_extent_generation(leaf, ei), @@ -4937,7 +4958,6 @@ int btrfs_alloc_logged_file_extent(struct btrfs_trans_handle *trans, .root = root_objectid, .num_bytes = ins->offset, .generation = trans->transid, - .rsv_bytes = 0, .is_data = true, .is_inc = true, }; diff --git a/fs/btrfs/qgroup.c b/fs/btrfs/qgroup.c index daec90342dad..e46774e8f49f 100644 --- a/fs/btrfs/qgroup.c +++ b/fs/btrfs/qgroup.c @@ -4661,6 +4661,17 @@ void btrfs_qgroup_destroy_extent_records(struct btrfs_transaction *trans) *root = RB_ROOT; } +void btrfs_free_squota_rsv(struct btrfs_fs_info *fs_info, u64 root, u64 rsv_bytes) +{ + if (btrfs_qgroup_mode(fs_info) != BTRFS_QGROUP_MODE_SIMPLE) + return; + + if (!is_fstree(root)) + return; + + btrfs_qgroup_free_refroot(fs_info, root, rsv_bytes, BTRFS_QGROUP_RSV_DATA); +} + int btrfs_record_squota_delta(struct btrfs_fs_info *fs_info, struct btrfs_squota_delta *delta) { @@ -4705,8 +4716,5 @@ int btrfs_record_squota_delta(struct btrfs_fs_info *fs_info, out: spin_unlock(&fs_info->qgroup_lock); - if (!ret && delta->rsv_bytes) - btrfs_qgroup_free_refroot(fs_info, root, delta->rsv_bytes, - BTRFS_QGROUP_RSV_DATA); return ret; } diff --git a/fs/btrfs/qgroup.h b/fs/btrfs/qgroup.h index 15b485506104..be18c862e64e 100644 --- a/fs/btrfs/qgroup.h +++ b/fs/btrfs/qgroup.h @@ -274,8 +274,6 @@ struct btrfs_squota_delta { u64 root; /* The number of bytes in the extent being counted. */ u64 num_bytes; - /* The number of bytes reserved for this extent. */ - u64 rsv_bytes; /* The generation the extent was created in. */ u64 generation; /* Whether we are using or freeing the extent. */ @@ -422,6 +420,7 @@ int btrfs_qgroup_trace_subtree_after_cow(struct btrfs_trans_handle *trans, struct btrfs_root *root, struct extent_buffer *eb); void btrfs_qgroup_destroy_extent_records(struct btrfs_transaction *trans); bool btrfs_check_quota_leak(struct btrfs_fs_info *fs_info); +void btrfs_free_squota_rsv(struct btrfs_fs_info *fs_info, u64 root, u64 rsv_bytes); int btrfs_record_squota_delta(struct btrfs_fs_info *fs_info, struct btrfs_squota_delta *delta); -- cgit v1.2.3 From 4b7de801606e504e69689df71475d27e35336fb3 Mon Sep 17 00:00:00 2001 From: Jiri Olsa Date: Wed, 6 Dec 2023 09:30:40 +0100 Subject: bpf: Fix prog_array_map_poke_run map poke update Lee pointed out issue found by syscaller [0] hitting BUG in prog array map poke update in prog_array_map_poke_run function due to error value returned from bpf_arch_text_poke function. There's race window where bpf_arch_text_poke can fail due to missing bpf program kallsym symbols, which is accounted for with check for -EINVAL in that BUG_ON call. The problem is that in such case we won't update the tail call jump and cause imbalance for the next tail call update check which will fail with -EBUSY in bpf_arch_text_poke. I'm hitting following race during the program load: CPU 0 CPU 1 bpf_prog_load bpf_check do_misc_fixups prog_array_map_poke_track map_update_elem bpf_fd_array_map_update_elem prog_array_map_poke_run bpf_arch_text_poke returns -EINVAL bpf_prog_kallsyms_add After bpf_arch_text_poke (CPU 1) fails to update the tail call jump, the next poke update fails on expected jump instruction check in bpf_arch_text_poke with -EBUSY and triggers the BUG_ON in prog_array_map_poke_run. Similar race exists on the program unload. Fixing this by moving the update to bpf_arch_poke_desc_update function which makes sure we call __bpf_arch_text_poke that skips the bpf address check. Each architecture has slightly different approach wrt looking up bpf address in bpf_arch_text_poke, so instead of splitting the function or adding new 'checkip' argument in previous version, it seems best to move the whole map_poke_run update as arch specific code. [0] https://syzkaller.appspot.com/bug?extid=97a4fe20470e9bc30810 Fixes: ebf7d1f508a7 ("bpf, x64: rework pro/epilogue and tailcall handling in JIT") Reported-by: syzbot+97a4fe20470e9bc30810@syzkaller.appspotmail.com Signed-off-by: Jiri Olsa Signed-off-by: Daniel Borkmann Acked-by: Yonghong Song Cc: Lee Jones Cc: Maciej Fijalkowski Link: https://lore.kernel.org/bpf/20231206083041.1306660-2-jolsa@kernel.org --- arch/x86/net/bpf_jit_comp.c | 46 +++++++++++++++++++++++++++++++++++ include/linux/bpf.h | 3 +++ kernel/bpf/arraymap.c | 58 ++++++++------------------------------------- 3 files changed, 59 insertions(+), 48 deletions(-) diff --git a/arch/x86/net/bpf_jit_comp.c b/arch/x86/net/bpf_jit_comp.c index 8c10d9abc239..e89e415aa743 100644 --- a/arch/x86/net/bpf_jit_comp.c +++ b/arch/x86/net/bpf_jit_comp.c @@ -3025,3 +3025,49 @@ void arch_bpf_stack_walk(bool (*consume_fn)(void *cookie, u64 ip, u64 sp, u64 bp #endif WARN(1, "verification of programs using bpf_throw should have failed\n"); } + +void bpf_arch_poke_desc_update(struct bpf_jit_poke_descriptor *poke, + struct bpf_prog *new, struct bpf_prog *old) +{ + u8 *old_addr, *new_addr, *old_bypass_addr; + int ret; + + old_bypass_addr = old ? NULL : poke->bypass_addr; + old_addr = old ? (u8 *)old->bpf_func + poke->adj_off : NULL; + new_addr = new ? (u8 *)new->bpf_func + poke->adj_off : NULL; + + /* + * On program loading or teardown, the program's kallsym entry + * might not be in place, so we use __bpf_arch_text_poke to skip + * the kallsyms check. + */ + if (new) { + ret = __bpf_arch_text_poke(poke->tailcall_target, + BPF_MOD_JUMP, + old_addr, new_addr); + BUG_ON(ret < 0); + if (!old) { + ret = __bpf_arch_text_poke(poke->tailcall_bypass, + BPF_MOD_JUMP, + poke->bypass_addr, + NULL); + BUG_ON(ret < 0); + } + } else { + ret = __bpf_arch_text_poke(poke->tailcall_bypass, + BPF_MOD_JUMP, + old_bypass_addr, + poke->bypass_addr); + BUG_ON(ret < 0); + /* let other CPUs finish the execution of program + * so that it will not possible to expose them + * to invalid nop, stack unwind, nop state + */ + if (!ret) + synchronize_rcu(); + ret = __bpf_arch_text_poke(poke->tailcall_target, + BPF_MOD_JUMP, + old_addr, NULL); + BUG_ON(ret < 0); + } +} diff --git a/include/linux/bpf.h b/include/linux/bpf.h index 6762dac3ef76..cff5bb08820e 100644 --- a/include/linux/bpf.h +++ b/include/linux/bpf.h @@ -3175,6 +3175,9 @@ enum bpf_text_poke_type { int bpf_arch_text_poke(void *ip, enum bpf_text_poke_type t, void *addr1, void *addr2); +void bpf_arch_poke_desc_update(struct bpf_jit_poke_descriptor *poke, + struct bpf_prog *new, struct bpf_prog *old); + void *bpf_arch_text_copy(void *dst, void *src, size_t len); int bpf_arch_text_invalidate(void *dst, size_t len); diff --git a/kernel/bpf/arraymap.c b/kernel/bpf/arraymap.c index 2058e89b5ddd..c85ff9162a5c 100644 --- a/kernel/bpf/arraymap.c +++ b/kernel/bpf/arraymap.c @@ -1012,11 +1012,16 @@ static void prog_array_map_poke_untrack(struct bpf_map *map, mutex_unlock(&aux->poke_mutex); } +void __weak bpf_arch_poke_desc_update(struct bpf_jit_poke_descriptor *poke, + struct bpf_prog *new, struct bpf_prog *old) +{ + WARN_ON_ONCE(1); +} + static void prog_array_map_poke_run(struct bpf_map *map, u32 key, struct bpf_prog *old, struct bpf_prog *new) { - u8 *old_addr, *new_addr, *old_bypass_addr; struct prog_poke_elem *elem; struct bpf_array_aux *aux; @@ -1025,7 +1030,7 @@ static void prog_array_map_poke_run(struct bpf_map *map, u32 key, list_for_each_entry(elem, &aux->poke_progs, list) { struct bpf_jit_poke_descriptor *poke; - int i, ret; + int i; for (i = 0; i < elem->aux->size_poke_tab; i++) { poke = &elem->aux->poke_tab[i]; @@ -1044,21 +1049,10 @@ static void prog_array_map_poke_run(struct bpf_map *map, u32 key, * activated, so tail call updates can arrive from here * while JIT is still finishing its final fixup for * non-activated poke entries. - * 3) On program teardown, the program's kallsym entry gets - * removed out of RCU callback, but we can only untrack - * from sleepable context, therefore bpf_arch_text_poke() - * might not see that this is in BPF text section and - * bails out with -EINVAL. As these are unreachable since - * RCU grace period already passed, we simply skip them. - * 4) Also programs reaching refcount of zero while patching + * 3) Also programs reaching refcount of zero while patching * is in progress is okay since we're protected under * poke_mutex and untrack the programs before the JIT - * buffer is freed. When we're still in the middle of - * patching and suddenly kallsyms entry of the program - * gets evicted, we just skip the rest which is fine due - * to point 3). - * 5) Any other error happening below from bpf_arch_text_poke() - * is a unexpected bug. + * buffer is freed. */ if (!READ_ONCE(poke->tailcall_target_stable)) continue; @@ -1068,39 +1062,7 @@ static void prog_array_map_poke_run(struct bpf_map *map, u32 key, poke->tail_call.key != key) continue; - old_bypass_addr = old ? NULL : poke->bypass_addr; - old_addr = old ? (u8 *)old->bpf_func + poke->adj_off : NULL; - new_addr = new ? (u8 *)new->bpf_func + poke->adj_off : NULL; - - if (new) { - ret = bpf_arch_text_poke(poke->tailcall_target, - BPF_MOD_JUMP, - old_addr, new_addr); - BUG_ON(ret < 0 && ret != -EINVAL); - if (!old) { - ret = bpf_arch_text_poke(poke->tailcall_bypass, - BPF_MOD_JUMP, - poke->bypass_addr, - NULL); - BUG_ON(ret < 0 && ret != -EINVAL); - } - } else { - ret = bpf_arch_text_poke(poke->tailcall_bypass, - BPF_MOD_JUMP, - old_bypass_addr, - poke->bypass_addr); - BUG_ON(ret < 0 && ret != -EINVAL); - /* let other CPUs finish the execution of program - * so that it will not possible to expose them - * to invalid nop, stack unwind, nop state - */ - if (!ret) - synchronize_rcu(); - ret = bpf_arch_text_poke(poke->tailcall_target, - BPF_MOD_JUMP, - old_addr, NULL); - BUG_ON(ret < 0 && ret != -EINVAL); - } + bpf_arch_poke_desc_update(poke, new, old); } } } -- cgit v1.2.3 From ffed24eff9e0e52d8e74df1c18db8ed43b4666e6 Mon Sep 17 00:00:00 2001 From: Jiri Olsa Date: Wed, 6 Dec 2023 09:30:41 +0100 Subject: selftests/bpf: Add test for early update in prog_array_map_poke_run Adding test that tries to trigger the BUG_IN during early map update in prog_array_map_poke_run function. The idea is to share prog array map between thread that constantly updates it and another one loading a program that uses that prog array. Eventually we will hit a place where the program is ok to be updated (poke->tailcall_target_stable check) but the address is still not registered in kallsyms, so the bpf_arch_text_poke returns -EINVAL and cause imbalance for the next tail call update check, which will fail with -EBUSY in bpf_arch_text_poke as described in previous fix. Signed-off-by: Jiri Olsa Signed-off-by: Daniel Borkmann Acked-by: Ilya Leoshkevich Link: https://lore.kernel.org/bpf/20231206083041.1306660-3-jolsa@kernel.org --- tools/testing/selftests/bpf/prog_tests/tailcalls.c | 84 ++++++++++++++++++++++ tools/testing/selftests/bpf/progs/tailcall_poke.c | 32 +++++++++ 2 files changed, 116 insertions(+) create mode 100644 tools/testing/selftests/bpf/progs/tailcall_poke.c diff --git a/tools/testing/selftests/bpf/prog_tests/tailcalls.c b/tools/testing/selftests/bpf/prog_tests/tailcalls.c index fc6b2954e8f5..59993fc9c0d7 100644 --- a/tools/testing/selftests/bpf/prog_tests/tailcalls.c +++ b/tools/testing/selftests/bpf/prog_tests/tailcalls.c @@ -1,6 +1,9 @@ // SPDX-License-Identifier: GPL-2.0 +#include #include #include +#include "tailcall_poke.skel.h" + /* test_tailcall_1 checks basic functionality by patching multiple locations * in a single program for a single tail call slot with nop->jmp, jmp->nop @@ -1105,6 +1108,85 @@ out: bpf_object__close(tgt_obj); } +#define JMP_TABLE "/sys/fs/bpf/jmp_table" + +static int poke_thread_exit; + +static void *poke_update(void *arg) +{ + __u32 zero = 0, prog1_fd, prog2_fd, map_fd; + struct tailcall_poke *call = arg; + + map_fd = bpf_map__fd(call->maps.jmp_table); + prog1_fd = bpf_program__fd(call->progs.call1); + prog2_fd = bpf_program__fd(call->progs.call2); + + while (!poke_thread_exit) { + bpf_map_update_elem(map_fd, &zero, &prog1_fd, BPF_ANY); + bpf_map_update_elem(map_fd, &zero, &prog2_fd, BPF_ANY); + } + + return NULL; +} + +/* + * We are trying to hit prog array update during another program load + * that shares the same prog array map. + * + * For that we share the jmp_table map between two skeleton instances + * by pinning the jmp_table to same path. Then first skeleton instance + * periodically updates jmp_table in 'poke update' thread while we load + * the second skeleton instance in the main thread. + */ +static void test_tailcall_poke(void) +{ + struct tailcall_poke *call, *test; + int err, cnt = 10; + pthread_t thread; + + unlink(JMP_TABLE); + + call = tailcall_poke__open_and_load(); + if (!ASSERT_OK_PTR(call, "tailcall_poke__open")) + return; + + err = bpf_map__pin(call->maps.jmp_table, JMP_TABLE); + if (!ASSERT_OK(err, "bpf_map__pin")) + goto out; + + err = pthread_create(&thread, NULL, poke_update, call); + if (!ASSERT_OK(err, "new toggler")) + goto out; + + while (cnt--) { + test = tailcall_poke__open(); + if (!ASSERT_OK_PTR(test, "tailcall_poke__open")) + break; + + err = bpf_map__set_pin_path(test->maps.jmp_table, JMP_TABLE); + if (!ASSERT_OK(err, "bpf_map__pin")) { + tailcall_poke__destroy(test); + break; + } + + bpf_program__set_autoload(test->progs.test, true); + bpf_program__set_autoload(test->progs.call1, false); + bpf_program__set_autoload(test->progs.call2, false); + + err = tailcall_poke__load(test); + tailcall_poke__destroy(test); + if (!ASSERT_OK(err, "tailcall_poke__load")) + break; + } + + poke_thread_exit = 1; + ASSERT_OK(pthread_join(thread, NULL), "pthread_join"); + +out: + bpf_map__unpin(call->maps.jmp_table, JMP_TABLE); + tailcall_poke__destroy(call); +} + void test_tailcalls(void) { if (test__start_subtest("tailcall_1")) @@ -1139,4 +1221,6 @@ void test_tailcalls(void) test_tailcall_bpf2bpf_fentry_fexit(); if (test__start_subtest("tailcall_bpf2bpf_fentry_entry")) test_tailcall_bpf2bpf_fentry_entry(); + if (test__start_subtest("tailcall_poke")) + test_tailcall_poke(); } diff --git a/tools/testing/selftests/bpf/progs/tailcall_poke.c b/tools/testing/selftests/bpf/progs/tailcall_poke.c new file mode 100644 index 000000000000..c78b94b75e83 --- /dev/null +++ b/tools/testing/selftests/bpf/progs/tailcall_poke.c @@ -0,0 +1,32 @@ +// SPDX-License-Identifier: GPL-2.0 +#include +#include +#include + +char _license[] SEC("license") = "GPL"; + +struct { + __uint(type, BPF_MAP_TYPE_PROG_ARRAY); + __uint(max_entries, 1); + __uint(key_size, sizeof(__u32)); + __uint(value_size, sizeof(__u32)); +} jmp_table SEC(".maps"); + +SEC("?fentry/bpf_fentry_test1") +int BPF_PROG(test, int a) +{ + bpf_tail_call_static(ctx, &jmp_table, 0); + return 0; +} + +SEC("fentry/bpf_fentry_test1") +int BPF_PROG(call1, int a) +{ + return 0; +} + +SEC("fentry/bpf_fentry_test1") +int BPF_PROG(call2, int a) +{ + return 0; +} -- cgit v1.2.3 From b6c7ca4d7966c9d6e3deaefa896666cd5f8e2d8d Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Wed, 6 Dec 2023 08:23:37 -0300 Subject: dt-bindings: lcdif: Properly describe the i.MX23 interrupts i.MX23 has two LCDIF interrupts instead of a single one like other i.MX devices. Take this into account for properly describing the i.MX23 LCDIF interrupts. This fixes the following dt-schema warning: imx23-olinuxino.dtb: lcdif@80030000: interrupts: [[46], [45]] is too long from schema $id: http://devicetree.org/schemas/display/fsl,lcdif.yaml# Signed-off-by: Fabio Estevam Reviewed-by: Marek Vasut Acked-by: Conor Dooley Link: https://lore.kernel.org/r/20231206112337.2234849-1-festevam@gmail.com Signed-off-by: Rob Herring --- .../devicetree/bindings/display/fsl,lcdif.yaml | 20 +++++++++++++++++++- 1 file changed, 19 insertions(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/display/fsl,lcdif.yaml b/Documentation/devicetree/bindings/display/fsl,lcdif.yaml index fc11ab5fc465..1c2be8d6f633 100644 --- a/Documentation/devicetree/bindings/display/fsl,lcdif.yaml +++ b/Documentation/devicetree/bindings/display/fsl,lcdif.yaml @@ -51,7 +51,10 @@ properties: minItems: 1 interrupts: - maxItems: 1 + items: + - description: LCDIF DMA interrupt + - description: LCDIF Error interrupt + minItems: 1 power-domains: maxItems: 1 @@ -131,6 +134,21 @@ allOf: then: required: - power-domains + - if: + properties: + compatible: + contains: + enum: + - fsl,imx23-lcdif + then: + properties: + interrupts: + minItems: 2 + maxItems: 2 + else: + properties: + interrupts: + maxItems: 1 examples: - | -- cgit v1.2.3 From 136c6531ba12e4a658376387e355a09c9b5223e5 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Wed, 6 Dec 2023 06:36:43 -0300 Subject: dt-bindings: display: adi,adv75xx: Document #sound-dai-cells When using audio from ADV7533 or ADV7535 and describing the audio card via simple-audio-card, the '#sound-dai-cells' needs to be passed. Document the '#sound-dai-cells' property to fix the following dt-schema warning: imx8mn-beacon-kit.dtb: hdmi@3d: '#sound-dai-cells' does not match any of the regexes: 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/display/bridge/adi,adv7533.yaml# Signed-off-by: Fabio Estevam Acked-by: Adam Ford Link: https://lore.kernel.org/r/20231206093643.2198562-1-festevam@gmail.com Signed-off-by: Rob Herring --- Documentation/devicetree/bindings/display/bridge/adi,adv7533.yaml | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/Documentation/devicetree/bindings/display/bridge/adi,adv7533.yaml b/Documentation/devicetree/bindings/display/bridge/adi,adv7533.yaml index 987aa83c2649..df20a3c9c744 100644 --- a/Documentation/devicetree/bindings/display/bridge/adi,adv7533.yaml +++ b/Documentation/devicetree/bindings/display/bridge/adi,adv7533.yaml @@ -9,6 +9,9 @@ title: Analog Devices ADV7533/35 HDMI Encoders maintainers: - Laurent Pinchart +allOf: + - $ref: /schemas/sound/dai-common.yaml# + description: | The ADV7533 and ADV7535 are HDMI audio and video transmitters compatible with HDMI 1.4 and DVI 1.0. They support color space @@ -89,6 +92,9 @@ properties: $ref: /schemas/types.yaml#/definitions/uint32 enum: [ 1, 2, 3, 4 ] + "#sound-dai-cells": + const: 0 + ports: description: The ADV7533/35 has two video ports and one audio port. -- cgit v1.2.3 From e59728883943c6820a0aa413db66a38f2e8c27bd Mon Sep 17 00:00:00 2001 From: Daniel Hill Date: Wed, 6 Dec 2023 21:26:00 +1300 Subject: bcachefs: rebalance shouldn't attempt to compress unwritten extents This fixes a bug where rebalance would loop repeatedly on the same extents. Signed-off-by: Daniel Hill Signed-off-by: Kent Overstreet --- fs/bcachefs/extents.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/fs/bcachefs/extents.c b/fs/bcachefs/extents.c index f6c92df55270..9d8afcb5979a 100644 --- a/fs/bcachefs/extents.c +++ b/fs/bcachefs/extents.c @@ -1294,7 +1294,8 @@ unsigned bch2_bkey_ptrs_need_rebalance(struct bch_fs *c, struct bkey_s_c k, unsigned i = 0; bkey_for_each_ptr_decode(k.k, ptrs, p, entry) { - if (p.crc.compression_type == BCH_COMPRESSION_TYPE_incompressible) { + if (p.crc.compression_type == BCH_COMPRESSION_TYPE_incompressible || + p.ptr.unwritten) { rewrite_ptrs = 0; goto incompressible; } -- cgit v1.2.3 From b197d16669831d3e3240e2b6a3e4f9cf0331d58e Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Tue, 14 Nov 2023 15:02:04 -0800 Subject: MAINTAINERS: add Andrew Morton for lib/* Add myself as the fallthough maintainer for material under lib/. Cc: Joe Perches Signed-off-by: Andrew Morton --- MAINTAINERS | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index 509281e9e169..633fc9f22cda 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -12208,6 +12208,13 @@ F: include/linux/nd.h F: include/uapi/linux/ndctl.h F: tools/testing/nvdimm/ +LIBRARY CODE +M: Andrew Morton +L: linux-kernel@vger.kernel.org +S: Supported +T: git git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm.git mm-nonmm-unstable +F: lib/* + LICENSES and SPDX stuff M: Thomas Gleixner M: Greg Kroah-Hartman -- cgit v1.2.3 From 187da0f8250aa94bd96266096aef6f694e0b4cd2 Mon Sep 17 00:00:00 2001 From: Mike Kravetz Date: Mon, 13 Nov 2023 17:20:33 -0800 Subject: hugetlb: fix null-ptr-deref in hugetlb_vma_lock_write The routine __vma_private_lock tests for the existence of a reserve map associated with a private hugetlb mapping. A pointer to the reserve map is in vma->vm_private_data. __vma_private_lock was checking the pointer for NULL. However, it is possible that the low bits of the pointer could be used as flags. In such instances, vm_private_data is not NULL and not a valid pointer. This results in the null-ptr-deref reported by syzbot: general protection fault, probably for non-canonical address 0xdffffc000000001d: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x00000000000000e8-0x00000000000000ef] CPU: 0 PID: 5048 Comm: syz-executor139 Not tainted 6.6.0-rc7-syzkaller-00142-g88 8cf78c29e2 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 1 0/09/2023 RIP: 0010:__lock_acquire+0x109/0x5de0 kernel/locking/lockdep.c:5004 ... Call Trace: lock_acquire kernel/locking/lockdep.c:5753 [inline] lock_acquire+0x1ae/0x510 kernel/locking/lockdep.c:5718 down_write+0x93/0x200 kernel/locking/rwsem.c:1573 hugetlb_vma_lock_write mm/hugetlb.c:300 [inline] hugetlb_vma_lock_write+0xae/0x100 mm/hugetlb.c:291 __hugetlb_zap_begin+0x1e9/0x2b0 mm/hugetlb.c:5447 hugetlb_zap_begin include/linux/hugetlb.h:258 [inline] unmap_vmas+0x2f4/0x470 mm/memory.c:1733 exit_mmap+0x1ad/0xa60 mm/mmap.c:3230 __mmput+0x12a/0x4d0 kernel/fork.c:1349 mmput+0x62/0x70 kernel/fork.c:1371 exit_mm kernel/exit.c:567 [inline] do_exit+0x9ad/0x2a20 kernel/exit.c:861 __do_sys_exit kernel/exit.c:991 [inline] __se_sys_exit kernel/exit.c:989 [inline] __x64_sys_exit+0x42/0x50 kernel/exit.c:989 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x38/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd Mask off low bit flags before checking for NULL pointer. In addition, the reserve map only 'belongs' to the OWNER (parent in parent/child relationships) so also check for the OWNER flag. Link: https://lkml.kernel.org/r/20231114012033.259600-1-mike.kravetz@oracle.com Reported-by: syzbot+6ada951e7c0f7bc8a71e@syzkaller.appspotmail.com Closes: https://lore.kernel.org/linux-mm/00000000000078d1e00608d7878b@google.com/ Fixes: bf4916922c60 ("hugetlbfs: extend hugetlb_vma_lock to private VMAs") Signed-off-by: Mike Kravetz Reviewed-by: Rik van Riel Cc: Edward Adam Davis Cc: Muchun Song Cc: Nathan Chancellor Cc: Nick Desaulniers Cc: Tom Rix Cc: Signed-off-by: Andrew Morton --- include/linux/hugetlb.h | 5 +---- mm/hugetlb.c | 7 +++++++ 2 files changed, 8 insertions(+), 4 deletions(-) diff --git a/include/linux/hugetlb.h b/include/linux/hugetlb.h index d3acecc5db4b..236ec7b63c54 100644 --- a/include/linux/hugetlb.h +++ b/include/linux/hugetlb.h @@ -1268,10 +1268,7 @@ static inline bool __vma_shareable_lock(struct vm_area_struct *vma) return (vma->vm_flags & VM_MAYSHARE) && vma->vm_private_data; } -static inline bool __vma_private_lock(struct vm_area_struct *vma) -{ - return (!(vma->vm_flags & VM_MAYSHARE)) && vma->vm_private_data; -} +bool __vma_private_lock(struct vm_area_struct *vma); /* * Safe version of huge_pte_offset() to check the locks. See comments diff --git a/mm/hugetlb.c b/mm/hugetlb.c index 1169ef2f2176..6feb3e0630d1 100644 --- a/mm/hugetlb.c +++ b/mm/hugetlb.c @@ -1182,6 +1182,13 @@ static int is_vma_resv_set(struct vm_area_struct *vma, unsigned long flag) return (get_vma_private_data(vma) & flag) != 0; } +bool __vma_private_lock(struct vm_area_struct *vma) +{ + return !(vma->vm_flags & VM_MAYSHARE) && + get_vma_private_data(vma) & ~HPAGE_RESV_MASK && + is_vma_resv_set(vma, HPAGE_RESV_OWNER); +} + void hugetlb_dup_vma_private(struct vm_area_struct *vma) { VM_BUG_ON_VMA(!is_vm_hugetlb_page(vma), vma); -- cgit v1.2.3 From 727d16f1993bcf46ee2888c13e3fc1463babed8d Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Wed, 15 Nov 2023 13:54:18 -0800 Subject: mm/memory.c:zap_pte_range() print bad swap entry We have a report of this WARN() triggering. Let's print the offending swp_entry_t to help diagnosis. Link: https://lkml.kernel.org/r/000000000000b0e576060a30ee3b@google.com Cc: Muhammad Usama Anjum Signed-off-by: Andrew Morton --- mm/memory.c | 1 + 1 file changed, 1 insertion(+) diff --git a/mm/memory.c b/mm/memory.c index 1f18ed4a5497..5c757fba8858 100644 --- a/mm/memory.c +++ b/mm/memory.c @@ -1517,6 +1517,7 @@ static unsigned long zap_pte_range(struct mmu_gather *tlb, continue; } else { /* We should have covered all the swap entry types */ + pr_alert("unrecognized swap entry 0x%lx\n", entry.val); WARN_ON_ONCE(1); } pte_clear_not_present_full(mm, addr, pte, tlb->fullmm); -- cgit v1.2.3 From 4eff7d62abdeb293233fdda2a2ecc4e0907a9a30 Mon Sep 17 00:00:00 2001 From: Liu Shixin Date: Wed, 15 Nov 2023 16:21:37 +0800 Subject: Revert "mm/kmemleak: move the initialisation of object to __link_object" Patch series "Fix invalid wait context of set_track_prepare()". Geert reported an invalid wait context[1] which is resulted by moving set_track_prepare() inside kmemleak_lock. This is not allowed because in RT mode, the spinlocks can be preempted but raw_spinlocks can not, so it is not allowd to acquire spinlocks while holding raw_spinlocks. The second patch fix same problem in kmemleak_update_trace(). This patch (of 2): Move the initialisation of object back to__alloc_object() because set_track_prepare() attempt to acquire zone->lock(spinlocks) while __link_object is holding kmemleak_lock(raw_spinlocks). This is not right for RT mode. This reverts commit 245245c2fffd00 ("mm/kmemleak: move the initialisation of object to __link_object"). Link: https://lkml.kernel.org/r/20231115082138.2649870-1-liushixin2@huawei.com Link: https://lkml.kernel.org/r/20231115082138.2649870-2-liushixin2@huawei.com Fixes: 245245c2fffd ("mm/kmemleak: move the initialisation of object to __link_object") Signed-off-by: Liu Shixin Reported-by: Geert Uytterhoeven Closes: https://lore.kernel.org/linux-mm/CAMuHMdWj0UzwNaxUvcocTfh481qRJpOWwXxsJCTJfu1oCqvgdA@mail.gmail.com/ [1] Acked-by: Catalin Marinas Cc: Kefeng Wang Cc: Patrick Wang Signed-off-by: Andrew Morton --- mm/kmemleak.c | 36 +++++++++++++++++++----------------- 1 file changed, 19 insertions(+), 17 deletions(-) diff --git a/mm/kmemleak.c b/mm/kmemleak.c index 1eacca03bedd..22bab3738a9e 100644 --- a/mm/kmemleak.c +++ b/mm/kmemleak.c @@ -642,32 +642,16 @@ static struct kmemleak_object *__alloc_object(gfp_t gfp) if (!object) { pr_warn("Cannot allocate a kmemleak_object structure\n"); kmemleak_disable(); + return NULL; } - return object; -} - -static int __link_object(struct kmemleak_object *object, unsigned long ptr, - size_t size, int min_count, bool is_phys) -{ - - struct kmemleak_object *parent; - struct rb_node **link, *rb_parent; - unsigned long untagged_ptr; - unsigned long untagged_objp; - INIT_LIST_HEAD(&object->object_list); INIT_LIST_HEAD(&object->gray_list); INIT_HLIST_HEAD(&object->area_list); raw_spin_lock_init(&object->lock); atomic_set(&object->use_count, 1); - object->flags = OBJECT_ALLOCATED | (is_phys ? OBJECT_PHYS : 0); - object->pointer = ptr; - object->size = kfence_ksize((void *)ptr) ?: size; object->excess_ref = 0; - object->min_count = min_count; object->count = 0; /* white color initially */ - object->jiffies = jiffies; object->checksum = 0; object->del_state = 0; @@ -692,6 +676,24 @@ static int __link_object(struct kmemleak_object *object, unsigned long ptr, /* kernel backtrace */ object->trace_handle = set_track_prepare(); + return object; +} + +static int __link_object(struct kmemleak_object *object, unsigned long ptr, + size_t size, int min_count, bool is_phys) +{ + + struct kmemleak_object *parent; + struct rb_node **link, *rb_parent; + unsigned long untagged_ptr; + unsigned long untagged_objp; + + object->flags = OBJECT_ALLOCATED | (is_phys ? OBJECT_PHYS : 0); + object->pointer = ptr; + object->size = kfence_ksize((void *)ptr) ?: size; + object->min_count = min_count; + object->jiffies = jiffies; + untagged_ptr = (unsigned long)kasan_reset_tag((void *)ptr); /* * Only update min_addr and max_addr with object -- cgit v1.2.3 From d63385a7d3099fedf201b0263282aebf9f9af3e8 Mon Sep 17 00:00:00 2001 From: Liu Shixin Date: Wed, 15 Nov 2023 16:21:38 +0800 Subject: mm/kmemleak: move set_track_prepare() outside raw_spinlocks set_track_prepare() will call __alloc_pages() which attempts to acquire zone->lock(spinlocks), so move it outside object->lock(raw_spinlocks) because it's not right to acquire spinlocks while holding raw_spinlocks in RT mode. Link: https://lkml.kernel.org/r/20231115082138.2649870-3-liushixin2@huawei.com Signed-off-by: Liu Shixin Acked-by: Catalin Marinas Cc: Geert Uytterhoeven Cc: Kefeng Wang Cc: Patrick Wang Signed-off-by: Andrew Morton --- mm/kmemleak.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/mm/kmemleak.c b/mm/kmemleak.c index 22bab3738a9e..5501363d6b31 100644 --- a/mm/kmemleak.c +++ b/mm/kmemleak.c @@ -1152,6 +1152,7 @@ EXPORT_SYMBOL_GPL(kmemleak_free_percpu); void __ref kmemleak_update_trace(const void *ptr) { struct kmemleak_object *object; + depot_stack_handle_t trace_handle; unsigned long flags; pr_debug("%s(0x%px)\n", __func__, ptr); @@ -1168,8 +1169,9 @@ void __ref kmemleak_update_trace(const void *ptr) return; } + trace_handle = set_track_prepare(); raw_spin_lock_irqsave(&object->lock, flags); - object->trace_handle = set_track_prepare(); + object->trace_handle = trace_handle; raw_spin_unlock_irqrestore(&object->lock, flags); put_object(object); -- cgit v1.2.3 From 5f79489a73d77419d18952e0258efbd5ecb74770 Mon Sep 17 00:00:00 2001 From: Roman Gushchin Date: Wed, 15 Nov 2023 18:51:09 -0800 Subject: mm: kmem: properly initialize local objcg variable in current_obj_cgroup() Erhard reported that the 6.7-rc1 kernel panics on boot if being built with clang-16. The problem was not reproducible with gcc. [ 5.975049] general protection fault, probably for non-canonical address 0xf555515555555557: 0000 [#1] SMP KASAN PTI [ 5.976422] KASAN: maybe wild-memory-access in range [0xaaaaaaaaaaaaaab8-0xaaaaaaaaaaaaaabf] [ 5.977475] CPU: 3 PID: 1 Comm: systemd Not tainted 6.7.0-rc1-Zen3 #77 [ 5.977860] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014 [ 5.977860] RIP: 0010:obj_cgroup_charge_pages+0x27/0x2d5 [ 5.977860] Code: 90 90 90 55 41 57 41 56 41 55 41 54 53 89 d5 41 89 f6 49 89 ff 48 b8 00 00 00 00 00 fc ff df 49 83 c7 10 4d3 [ 5.977860] RSP: 0018:ffffc9000001fb18 EFLAGS: 00010a02 [ 5.977860] RAX: dffffc0000000000 RBX: aaaaaaaaaaaaaaaa RCX: ffff8883eb9a8b08 [ 5.977860] RDX: 0000000000000005 RSI: 0000000000400cc0 RDI: aaaaaaaaaaaaaaaa [ 5.977860] RBP: 0000000000000005 R08: 3333333333333333 R09: 0000000000000000 [ 5.977860] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8883eb9a8b18 [ 5.977860] R13: 1555555555555557 R14: 0000000000400cc0 R15: aaaaaaaaaaaaaaba [ 5.977860] FS: 00007f2976438b40(0000) GS:ffff8883eb980000(0000) knlGS:0000000000000000 [ 5.977860] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 5.977860] CR2: 00007f29769e0060 CR3: 0000000107222003 CR4: 0000000000370eb0 [ 5.977860] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 5.977860] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 5.977860] Call Trace: [ 5.977860] [ 5.977860] ? __die_body+0x16/0x75 [ 5.977860] ? die_addr+0x4a/0x70 [ 5.977860] ? exc_general_protection+0x1c9/0x2d0 [ 5.977860] ? cgroup_mkdir+0x455/0x9fb [ 5.977860] ? __x64_sys_mkdir+0x69/0x80 [ 5.977860] ? asm_exc_general_protection+0x26/0x30 [ 5.977860] ? obj_cgroup_charge_pages+0x27/0x2d5 [ 5.977860] obj_cgroup_charge+0x114/0x1ab [ 5.977860] pcpu_alloc+0x1a6/0xa65 [ 5.977860] ? mem_cgroup_css_alloc+0x1eb/0x1140 [ 5.977860] ? cgroup_apply_control_enable+0x26b/0x7c0 [ 5.977860] mem_cgroup_css_alloc+0x23f/0x1140 [ 5.977860] cgroup_apply_control_enable+0x26b/0x7c0 [ 5.977860] ? cgroup_kn_set_ugid+0x2d/0x1a0 [ 5.977860] cgroup_mkdir+0x455/0x9fb [ 5.977860] ? __cfi_cgroup_mkdir+0x10/0x10 [ 5.977860] kernfs_iop_mkdir+0x130/0x170 [ 5.977860] vfs_mkdir+0x405/0x530 [ 5.977860] do_mkdirat+0x188/0x1f0 [ 5.977860] __x64_sys_mkdir+0x69/0x80 [ 5.977860] do_syscall_64+0x7d/0x100 [ 5.977860] ? do_syscall_64+0x89/0x100 [ 5.977860] ? do_syscall_64+0x89/0x100 [ 5.977860] ? do_syscall_64+0x89/0x100 [ 5.977860] ? do_syscall_64+0x89/0x100 [ 5.977860] entry_SYSCALL_64_after_hwframe+0x4b/0x53 [ 5.977860] RIP: 0033:0x7f297671defb [ 5.977860] Code: 8b 05 39 7f 0d 00 bb ff ff ff ff 64 c7 00 16 00 00 00 e9 61 ff ff ff e8 23 0c 02 00 0f 1f 00 f3 0f 1e fa b88 [ 5.977860] RSP: 002b:00007ffee6242bb8 EFLAGS: 00000246 ORIG_RAX: 0000000000000053 [ 5.977860] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f297671defb [ 5.977860] RDX: 0000000000000000 RSI: 00000000000001ed RDI: 000055c6b449f0e0 [ 5.977860] RBP: 00007ffee6242bf0 R08: 000000000000000e R09: 0000000000000000 [ 5.977860] R10: 0000000000000000 R11: 0000000000000246 R12: 000055c6b445db80 [ 5.977860] R13: 00000000000003a0 R14: 00007f2976a68651 R15: 00000000000003a0 [ 5.977860] [ 5.977860] Modules linked in: [ 6.014095] ---[ end trace 0000000000000000 ]--- [ 6.014701] RIP: 0010:obj_cgroup_charge_pages+0x27/0x2d5 [ 6.015348] Code: 90 90 90 55 41 57 41 56 41 55 41 54 53 89 d5 41 89 f6 49 89 ff 48 b8 00 00 00 00 00 fc ff df 49 83 c7 10 4d3 [ 6.017575] RSP: 0018:ffffc9000001fb18 EFLAGS: 00010a02 [ 6.018255] RAX: dffffc0000000000 RBX: aaaaaaaaaaaaaaaa RCX: ffff8883eb9a8b08 [ 6.019120] RDX: 0000000000000005 RSI: 0000000000400cc0 RDI: aaaaaaaaaaaaaaaa [ 6.019983] RBP: 0000000000000005 R08: 3333333333333333 R09: 0000000000000000 [ 6.020849] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8883eb9a8b18 [ 6.021747] R13: 1555555555555557 R14: 0000000000400cc0 R15: aaaaaaaaaaaaaaba [ 6.022609] FS: 00007f2976438b40(0000) GS:ffff8883eb980000(0000) knlGS:0000000000000000 [ 6.023593] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 6.024296] CR2: 00007f29769e0060 CR3: 0000000107222003 CR4: 0000000000370eb0 [ 6.025279] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 6.026139] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 6.027000] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b Actually the problem is caused by uninitialized local variable in current_obj_cgroup(). If the root memory cgroup is set as an active memory cgroup for a charging scope (as in the trace, where systemd tries to create the first non-root cgroup, so the parent cgroup is the root cgroup), the "for" loop is skipped and uninitialized objcg is returned, causing a panic down the accounting stack. The fix is trivial: initialize the objcg variable to NULL unconditionally before the "for" loop. [vbabka@suse.cz: remove redundant assignment] Link: https://lkml.kernel.org/r/4bd106d5-c3e3-6731-9a74-cff81e2392de@suse.cz Link: https://lkml.kernel.org/r/20231116025109.3775055-1-roman.gushchin@linux.dev Fixes: e86828e5446d ("mm: kmem: scoped objcg protection") Signed-off-by: Roman Gushchin (Cruise) Signed-off-by: Vlastimil Babka Reported-by: Erhard Furtner Closes: https://github.com/ClangBuiltLinux/linux/issues/1959 Tested-by: Erhard Furtner Acked-by: Vlastimil Babka Acked-by: Shakeel Butt Cc: David Rientjes Cc: Dennis Zhou Cc: Johannes Weiner Cc: Michal Hocko Cc: Muchun Song Signed-off-by: Andrew Morton --- mm/memcontrol.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/mm/memcontrol.c b/mm/memcontrol.c index 1c1061df9cd1..b226090fd906 100644 --- a/mm/memcontrol.c +++ b/mm/memcontrol.c @@ -3166,6 +3166,7 @@ __always_inline struct obj_cgroup *current_obj_cgroup(void) return NULL; from_memcg: + objcg = NULL; for (; !mem_cgroup_is_root(memcg); memcg = parent_mem_cgroup(memcg)) { /* * Memcg pointer is protected by scope (see set_active_memcg()) @@ -3176,7 +3177,6 @@ from_memcg: objcg = rcu_dereference_check(memcg->objcg, 1); if (likely(objcg)) break; - objcg = NULL; } return objcg; -- cgit v1.2.3 From 0dff1b407def32452a0d80148172889862c64fe7 Mon Sep 17 00:00:00 2001 From: Peter Xu Date: Thu, 16 Nov 2023 15:15:45 -0500 Subject: mm/pagemap: fix ioctl(PAGEMAP_SCAN) on vma check Patch series "mm/pagemap: A few fixes to the recent PAGEMAP_SCAN". This series should fix two known reports from syzbot on the new PAGEMAP_SCAN ioctl(): https://lore.kernel.org/all/000000000000b0e576060a30ee3b@google.com/ https://lore.kernel.org/all/000000000000773fa7060a31e2cc@google.com/ The 3rd patch is something I found when testing these patches. This patch (of 3): The new ioctl(PAGEMAP_SCAN) relies on vma wr-protect capability provided by userfault, however in the vma test it didn't explicitly require the vma to have wr-protect function enabled, even if PM_SCAN_WP_MATCHING flag is set. It means the pagemap code can now apply uffd-wp bit to a page in the vma even if not registered to userfaultfd at all. Then in whatever way as long as the pte got written and page fault resolved, we'll apply the write bit even if uffd-wp bit is set. We'll see a pte that has both UFFD_WP and WRITE bit set. Anything later that looks up the pte for uffd-wp bit will trigger the warning: WARNING: CPU: 1 PID: 5071 at arch/x86/include/asm/pgtable.h:403 pte_uffd_wp arch/x86/include/asm/pgtable.h:403 [inline] Fix it by doing proper check over the vma attributes when PM_SCAN_WP_MATCHING is specified. Link: https://lkml.kernel.org/r/20231116201547.536857-1-peterx@redhat.com Link: https://lkml.kernel.org/r/20231116201547.536857-2-peterx@redhat.com Fixes: 52526ca7fdb9 ("fs/proc/task_mmu: implement IOCTL to get and optionally clear info about PTEs") Signed-off-by: Peter Xu Reported-by: syzbot+e94c5aaf7890901ebf9b@syzkaller.appspotmail.com Reviewed-by: David Hildenbrand Reviewed-by: Andrei Vagin Reviewed-by: Muhammad Usama Anjum Signed-off-by: Andrew Morton --- fs/proc/task_mmu.c | 24 ++++++++++++++++++++---- 1 file changed, 20 insertions(+), 4 deletions(-) diff --git a/fs/proc/task_mmu.c b/fs/proc/task_mmu.c index ef2eb12906da..a6f88cbfb689 100644 --- a/fs/proc/task_mmu.c +++ b/fs/proc/task_mmu.c @@ -1982,15 +1982,31 @@ static int pagemap_scan_test_walk(unsigned long start, unsigned long end, struct pagemap_scan_private *p = walk->private; struct vm_area_struct *vma = walk->vma; unsigned long vma_category = 0; + bool wp_allowed = userfaultfd_wp_async(vma) && + userfaultfd_wp_use_markers(vma); - if (userfaultfd_wp_async(vma) && userfaultfd_wp_use_markers(vma)) - vma_category |= PAGE_IS_WPALLOWED; - else if (p->arg.flags & PM_SCAN_CHECK_WPASYNC) - return -EPERM; + if (!wp_allowed) { + /* User requested explicit failure over wp-async capability */ + if (p->arg.flags & PM_SCAN_CHECK_WPASYNC) + return -EPERM; + /* + * User requires wr-protect, and allows silently skipping + * unsupported vmas. + */ + if (p->arg.flags & PM_SCAN_WP_MATCHING) + return 1; + /* + * Then the request doesn't involve wr-protects at all, + * fall through to the rest checks, and allow vma walk. + */ + } if (vma->vm_flags & VM_PFNMAP) return 1; + if (wp_allowed) + vma_category |= PAGE_IS_WPALLOWED; + if (!pagemap_scan_is_interesting_vma(vma_category, p)) return 1; -- cgit v1.2.3 From 4980e837cab7e2acc4dad18dba656c6896c531aa Mon Sep 17 00:00:00 2001 From: Peter Xu Date: Thu, 16 Nov 2023 15:15:46 -0500 Subject: mm/pagemap: fix wr-protect even if PM_SCAN_WP_MATCHING not set The new pagemap ioctl contains a fast path for wr-protections without looking into category masks. It forgets to check PM_SCAN_WP_MATCHING before applying the wr-protections. It can cause, e.g., pte markers installed on archs that do not even support uffd wr-protect. WARNING: CPU: 0 PID: 5059 at mm/memory.c:1520 zap_pte_range mm/memory.c:1520 [inline] Link: https://lkml.kernel.org/r/20231116201547.536857-3-peterx@redhat.com Fixes: 12f6b01a0bcb ("fs/proc/task_mmu: add fast paths to get/clear PAGE_IS_WRITTEN flag") Signed-off-by: Peter Xu Reported-by: syzbot+7ca4b2719dc742b8d0a4@syzkaller.appspotmail.com Reviewed-by: David Hildenbrand Reviewed-by: Andrei Vagin Cc: Muhammad Usama Anjum Signed-off-by: Andrew Morton --- fs/proc/task_mmu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/proc/task_mmu.c b/fs/proc/task_mmu.c index a6f88cbfb689..435b61054b5b 100644 --- a/fs/proc/task_mmu.c +++ b/fs/proc/task_mmu.c @@ -2156,7 +2156,7 @@ static int pagemap_scan_pmd_entry(pmd_t *pmd, unsigned long start, return 0; } - if (!p->vec_out) { + if ((p->arg.flags & PM_SCAN_WP_MATCHING) && !p->vec_out) { /* Fast path for performing exclusive WP */ for (addr = start; addr != end; pte++, addr += PAGE_SIZE) { if (pte_uffd_wp(ptep_get(pte))) -- cgit v1.2.3 From 3f3cac5c0a5c3b09bdfb919a7518dca83523a52c Mon Sep 17 00:00:00 2001 From: Peter Xu Date: Thu, 16 Nov 2023 15:15:47 -0500 Subject: mm/selftests: fix pagemap_ioctl memory map test __FILE__ is not guaranteed to exist in current dir. Replace that with argv[0] for memory map test. Link: https://lkml.kernel.org/r/20231116201547.536857-4-peterx@redhat.com Fixes: 46fd75d4a3c9 ("selftests: mm: add pagemap ioctl tests") Signed-off-by: Peter Xu Reviewed-by: David Hildenbrand Cc: Andrei Vagin Cc: David Hildenbrand Cc: Muhammad Usama Anjum Signed-off-by: Andrew Morton --- tools/testing/selftests/mm/pagemap_ioctl.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/tools/testing/selftests/mm/pagemap_ioctl.c b/tools/testing/selftests/mm/pagemap_ioctl.c index befab43719ba..d59517ed3d48 100644 --- a/tools/testing/selftests/mm/pagemap_ioctl.c +++ b/tools/testing/selftests/mm/pagemap_ioctl.c @@ -36,6 +36,7 @@ int pagemap_fd; int uffd; int page_size; int hpage_size; +const char *progname; #define LEN(region) ((region.end - region.start)/page_size) @@ -1149,11 +1150,11 @@ int sanity_tests(void) munmap(mem, mem_size); /* 9. Memory mapped file */ - fd = open(__FILE__, O_RDONLY); + fd = open(progname, O_RDONLY); if (fd < 0) ksft_exit_fail_msg("%s Memory mapped file\n", __func__); - ret = stat(__FILE__, &sbuf); + ret = stat(progname, &sbuf); if (ret < 0) ksft_exit_fail_msg("error %d %d %s\n", ret, errno, strerror(errno)); @@ -1472,12 +1473,14 @@ static void transact_test(int page_size) extra_thread_faults); } -int main(void) +int main(int argc, char *argv[]) { int mem_size, shmid, buf_size, fd, i, ret; char *mem, *map, *fmem; struct stat sbuf; + progname = argv[0]; + ksft_print_header(); if (init_uffd()) -- cgit v1.2.3 From eb66b8abae98f869c224f7c852b685ae02144564 Mon Sep 17 00:00:00 2001 From: Lizhi Xu Date: Thu, 16 Nov 2023 11:13:52 +0800 Subject: squashfs: squashfs_read_data need to check if the length is 0 When the length passed in is 0, the pagemap_scan_test_walk() caller should bail. This error causes at least a WARN_ON(). Link: https://lkml.kernel.org/r/20231116031352.40853-1-lizhi.xu@windriver.com Reported-by: syzbot+32d3767580a1ea339a81@syzkaller.appspotmail.com Closes: https://lkml.kernel.org/r/0000000000000526f2060a30a085@google.com Signed-off-by: Lizhi Xu Reviewed-by: Phillip Lougher Signed-off-by: Andrew Morton --- fs/squashfs/block.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/squashfs/block.c b/fs/squashfs/block.c index 581ce9519339..2dc730800f44 100644 --- a/fs/squashfs/block.c +++ b/fs/squashfs/block.c @@ -321,7 +321,7 @@ int squashfs_read_data(struct super_block *sb, u64 index, int length, TRACE("Block @ 0x%llx, %scompressed size %d\n", index - 2, compressed ? "" : "un", length); } - if (length < 0 || length > output->length || + if (length <= 0 || length > output->length || (index + length) > msblk->bytes_used) { res = -EIO; goto out; -- cgit v1.2.3 From 9aa1345d66b8132745ffb99b348b1492088da9e2 Mon Sep 17 00:00:00 2001 From: Hugh Dickins Date: Fri, 17 Nov 2023 00:49:18 -0800 Subject: mm: fix oops when filemap_map_pmd() without prealloc_pte MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit syzbot reports oops in lockdep's __lock_acquire(), called from __pte_offset_map_lock() called from filemap_map_pages(); or when I run the repro, the oops comes in pmd_install(), called from filemap_map_pmd() called from filemap_map_pages(), just before the __pte_offset_map_lock(). The problem is that filemap_map_pmd() has been assuming that when it finds pmd_none(), a page table has already been prepared in prealloc_pte; and indeed do_fault_around() has been careful to preallocate one there, when it finds pmd_none(): but what if *pmd became none in between? My 6.6 mods in mm/khugepaged.c, avoiding mmap_lock for write, have made it easy for *pmd to be cleared while servicing a page fault; but even before those, a huge *pmd might be zapped while a fault is serviced. The difference in symptomatic stack traces comes from the "memory model" in use: pmd_install() uses pmd_populate() uses page_to_pfn(): in some models that is strict, and will oops on the NULL prealloc_pte; in other models, it will construct a bogus value to be populated into *pmd, then __pte_offset_map_lock() oops when trying to access split ptlock pointer (or some other symptom in normal case of ptlock embedded not pointer). Link: https://lore.kernel.org/linux-mm/20231115065506.19780-1-jose.pekkarinen@foxhound.fi/ Link: https://lkml.kernel.org/r/6ed0c50c-78ef-0719-b3c5-60c0c010431c@google.com Fixes: f9ce0be71d1f ("mm: Cleanup faultaround and finish_fault() codepaths") Signed-off-by: Hugh Dickins Reported-and-tested-by: syzbot+89edd67979b52675ddec@syzkaller.appspotmail.com Closes: https://lore.kernel.org/linux-mm/0000000000005e44550608a0806c@google.com/ Reviewed-by: David Hildenbrand Cc: Jann Horn , Cc: José Pekkarinen Cc: Kirill A. Shutemov Cc: Matthew Wilcox (Oracle) Cc: [5.12+] Signed-off-by: Andrew Morton --- mm/filemap.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/mm/filemap.c b/mm/filemap.c index 32eedf3afd45..f1c8c278310f 100644 --- a/mm/filemap.c +++ b/mm/filemap.c @@ -3371,7 +3371,7 @@ static bool filemap_map_pmd(struct vm_fault *vmf, struct folio *folio, } } - if (pmd_none(*vmf->pmd)) + if (pmd_none(*vmf->pmd) && vmf->prealloc_pte) pmd_install(mm, vmf->pmd, &vmf->prealloc_pte); return false; -- cgit v1.2.3 From c540b03828dff96e1b36e9e75714f0a8e807a92e Mon Sep 17 00:00:00 2001 From: Chester Lin Date: Fri, 17 Nov 2023 10:28:07 +0800 Subject: .mailmap: add a new address mapping for Chester Lin My company email address is going to be disabled so let's create a mapping that links to my private/community email just in case people might still try to reach me via the old one. Link: https://lkml.kernel.org/r/20231117022807.29461-1-clin@suse.com Signed-off-by: Chester Lin Cc: Chester Lin Cc: Bjorn Andersson Cc: Greg Kroah-Hartman Cc: Heiko Stuebner Cc: Jakub Kicinski Cc: Konrad Dybcio Cc: Oleksij Rempel Cc: Stephen Hemminger Cc: Conor Dooley Cc: Matthias Brugger Signed-off-by: Andrew Morton --- .mailmap | 1 + 1 file changed, 1 insertion(+) diff --git a/.mailmap b/.mailmap index 43031441b2d9..19eb49e55836 100644 --- a/.mailmap +++ b/.mailmap @@ -117,6 +117,7 @@ Changbin Du Changbin Du Chao Yu Chao Yu +Chester Lin Chris Chiu Chris Chiu Chris Lew -- cgit v1.2.3 From 001002e73712cdf6b8d9a103648cda3040ad7647 Mon Sep 17 00:00:00 2001 From: Sumanth Korikkar Date: Mon, 20 Nov 2023 15:53:52 +0100 Subject: mm/memory_hotplug: add missing mem_hotplug_lock From Documentation/core-api/memory-hotplug.rst: When adding/removing/onlining/offlining memory or adding/removing heterogeneous/device memory, we should always hold the mem_hotplug_lock in write mode to serialise memory hotplug (e.g. access to global/zone variables). mhp_(de)init_memmap_on_memory() functions can change zone stats and struct page content, but they are currently called w/o the mem_hotplug_lock. When memory block is being offlined and when kmemleak goes through each populated zone, the following theoretical race conditions could occur: CPU 0: | CPU 1: memory_offline() | -> offline_pages() | -> mem_hotplug_begin() | ... | -> mem_hotplug_done() | | kmemleak_scan() | -> get_online_mems() | ... -> mhp_deinit_memmap_on_memory() | [not protected by mem_hotplug_begin/done()]| Marks memory section as offline, | Retrieves zone_start_pfn poisons vmemmap struct pages and updates | and struct page members. the zone related data | | ... | -> put_online_mems() Fix this by ensuring mem_hotplug_lock is taken before performing mhp_init_memmap_on_memory(). Also ensure that mhp_deinit_memmap_on_memory() holds the lock. online/offline_pages() are currently only called from memory_block_online/offline(), so it is safe to move the locking there. Link: https://lkml.kernel.org/r/20231120145354.308999-2-sumanthk@linux.ibm.com Fixes: a08a2ae34613 ("mm,memory_hotplug: allocate memmap from the added memory range") Signed-off-by: Sumanth Korikkar Reviewed-by: Gerald Schaefer Acked-by: David Hildenbrand Cc: Alexander Gordeev Cc: Aneesh Kumar K.V Cc: Anshuman Khandual Cc: Heiko Carstens Cc: Michal Hocko Cc: Oscar Salvador Cc: Vasily Gorbik Cc: kernel test robot Cc: [5.15+] Signed-off-by: Andrew Morton --- drivers/base/memory.c | 18 +++++++++++++++--- mm/memory_hotplug.c | 13 ++++++------- 2 files changed, 21 insertions(+), 10 deletions(-) diff --git a/drivers/base/memory.c b/drivers/base/memory.c index f3b9a4d0fa3b..8a13babd826c 100644 --- a/drivers/base/memory.c +++ b/drivers/base/memory.c @@ -180,6 +180,9 @@ static inline unsigned long memblk_nr_poison(struct memory_block *mem) } #endif +/* + * Must acquire mem_hotplug_lock in write mode. + */ static int memory_block_online(struct memory_block *mem) { unsigned long start_pfn = section_nr_to_pfn(mem->start_section_nr); @@ -204,10 +207,11 @@ static int memory_block_online(struct memory_block *mem) if (mem->altmap) nr_vmemmap_pages = mem->altmap->free; + mem_hotplug_begin(); if (nr_vmemmap_pages) { ret = mhp_init_memmap_on_memory(start_pfn, nr_vmemmap_pages, zone); if (ret) - return ret; + goto out; } ret = online_pages(start_pfn + nr_vmemmap_pages, @@ -215,7 +219,7 @@ static int memory_block_online(struct memory_block *mem) if (ret) { if (nr_vmemmap_pages) mhp_deinit_memmap_on_memory(start_pfn, nr_vmemmap_pages); - return ret; + goto out; } /* @@ -227,9 +231,14 @@ static int memory_block_online(struct memory_block *mem) nr_vmemmap_pages); mem->zone = zone; +out: + mem_hotplug_done(); return ret; } +/* + * Must acquire mem_hotplug_lock in write mode. + */ static int memory_block_offline(struct memory_block *mem) { unsigned long start_pfn = section_nr_to_pfn(mem->start_section_nr); @@ -247,6 +256,7 @@ static int memory_block_offline(struct memory_block *mem) if (mem->altmap) nr_vmemmap_pages = mem->altmap->free; + mem_hotplug_begin(); if (nr_vmemmap_pages) adjust_present_page_count(pfn_to_page(start_pfn), mem->group, -nr_vmemmap_pages); @@ -258,13 +268,15 @@ static int memory_block_offline(struct memory_block *mem) if (nr_vmemmap_pages) adjust_present_page_count(pfn_to_page(start_pfn), mem->group, nr_vmemmap_pages); - return ret; + goto out; } if (nr_vmemmap_pages) mhp_deinit_memmap_on_memory(start_pfn, nr_vmemmap_pages); mem->zone = NULL; +out: + mem_hotplug_done(); return ret; } diff --git a/mm/memory_hotplug.c b/mm/memory_hotplug.c index ab41a511e20a..bb908289679e 100644 --- a/mm/memory_hotplug.c +++ b/mm/memory_hotplug.c @@ -1129,6 +1129,9 @@ void mhp_deinit_memmap_on_memory(unsigned long pfn, unsigned long nr_pages) kasan_remove_zero_shadow(__va(PFN_PHYS(pfn)), PFN_PHYS(nr_pages)); } +/* + * Must be called with mem_hotplug_lock in write mode. + */ int __ref online_pages(unsigned long pfn, unsigned long nr_pages, struct zone *zone, struct memory_group *group) { @@ -1149,7 +1152,6 @@ int __ref online_pages(unsigned long pfn, unsigned long nr_pages, !IS_ALIGNED(pfn + nr_pages, PAGES_PER_SECTION))) return -EINVAL; - mem_hotplug_begin(); /* associate pfn range with the zone */ move_pfn_range_to_zone(zone, pfn, nr_pages, NULL, MIGRATE_ISOLATE); @@ -1208,7 +1210,6 @@ int __ref online_pages(unsigned long pfn, unsigned long nr_pages, writeback_set_ratelimit(); memory_notify(MEM_ONLINE, &arg); - mem_hotplug_done(); return 0; failed_addition: @@ -1217,7 +1218,6 @@ failed_addition: (((unsigned long long) pfn + nr_pages) << PAGE_SHIFT) - 1); memory_notify(MEM_CANCEL_ONLINE, &arg); remove_pfn_range_from_zone(zone, pfn, nr_pages); - mem_hotplug_done(); return ret; } @@ -1863,6 +1863,9 @@ static int count_system_ram_pages_cb(unsigned long start_pfn, return 0; } +/* + * Must be called with mem_hotplug_lock in write mode. + */ int __ref offline_pages(unsigned long start_pfn, unsigned long nr_pages, struct zone *zone, struct memory_group *group) { @@ -1885,8 +1888,6 @@ int __ref offline_pages(unsigned long start_pfn, unsigned long nr_pages, !IS_ALIGNED(start_pfn + nr_pages, PAGES_PER_SECTION))) return -EINVAL; - mem_hotplug_begin(); - /* * Don't allow to offline memory blocks that contain holes. * Consequently, memory blocks with holes can never get onlined @@ -2031,7 +2032,6 @@ int __ref offline_pages(unsigned long start_pfn, unsigned long nr_pages, memory_notify(MEM_OFFLINE, &arg); remove_pfn_range_from_zone(zone, start_pfn, nr_pages); - mem_hotplug_done(); return 0; failed_removal_isolated: @@ -2046,7 +2046,6 @@ failed_removal: (unsigned long long) start_pfn << PAGE_SHIFT, ((unsigned long long) end_pfn << PAGE_SHIFT) - 1, reason); - mem_hotplug_done(); return ret; } -- cgit v1.2.3 From f42ce5f087eb69e47294ababd2e7e6f88a82d308 Mon Sep 17 00:00:00 2001 From: Sumanth Korikkar Date: Mon, 20 Nov 2023 15:53:53 +0100 Subject: mm/memory_hotplug: fix error handling in add_memory_resource() In add_memory_resource(), creation of memory block devices occurs after successful call to arch_add_memory(). However, creation of memory block devices could fail. In that case, arch_remove_memory() is called to perform necessary cleanup. Currently with or without altmap support, arch_remove_memory() is always passed with altmap set to NULL during error handling. This leads to freeing of struct pages using free_pages(), eventhough the allocation might have been performed with altmap support via altmap_alloc_block_buf(). Fix the error handling by passing altmap in arch_remove_memory(). This ensures the following: * When altmap is disabled, deallocation of the struct pages array occurs via free_pages(). * When altmap is enabled, deallocation occurs via vmem_altmap_free(). Link: https://lkml.kernel.org/r/20231120145354.308999-3-sumanthk@linux.ibm.com Fixes: a08a2ae34613 ("mm,memory_hotplug: allocate memmap from the added memory range") Signed-off-by: Sumanth Korikkar Reviewed-by: Gerald Schaefer Acked-by: David Hildenbrand Cc: Alexander Gordeev Cc: Aneesh Kumar K.V Cc: Anshuman Khandual Cc: Heiko Carstens Cc: kernel test robot Cc: Michal Hocko Cc: Oscar Salvador Cc: Vasily Gorbik Cc: [5.15+] Signed-off-by: Andrew Morton --- mm/memory_hotplug.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/mm/memory_hotplug.c b/mm/memory_hotplug.c index bb908289679e..7a5fc89a8652 100644 --- a/mm/memory_hotplug.c +++ b/mm/memory_hotplug.c @@ -1458,7 +1458,7 @@ int __ref add_memory_resource(int nid, struct resource *res, mhp_t mhp_flags) /* create memory block devices after memory was added */ ret = create_memory_block_devices(start, size, params.altmap, group); if (ret) { - arch_remove_memory(start, size, NULL); + arch_remove_memory(start, size, params.altmap); goto error_free; } -- cgit v1.2.3 From ee34db3f271cea4d4252048617919c2caafe698b Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Mon, 20 Nov 2023 19:37:17 +0100 Subject: checkstack: fix printed address All addresses printed by checkstack have an extra incorrect 0 appended at the end. This was introduced with commit 677f1410e058 ("scripts/checkstack.pl: don't display $dre as different entity"): since then the address is taken from the line which contains the function name, instead of the line which contains stack consumption. E.g. on s390: 0000000000100a30 : ... 100a44: e3 f0 ff 70 ff 71 lay %r15,-144(%r15) So the used regex which matches spaces and hexadecimal numbers to extract an address now matches a different substring. Subsequently replacing spaces with 0 appends a zero at the and, instead of replacing leading spaces. Fix this by using the proper regex, and simplify the code a bit. Link: https://lkml.kernel.org/r/20231120183719.2188479-2-hca@linux.ibm.com Fixes: 677f1410e058 ("scripts/checkstack.pl: don't display $dre as different entity") Signed-off-by: Heiko Carstens Cc: Maninder Singh Cc: Masahiro Yamada Cc: Vaneet Narang Cc: Signed-off-by: Andrew Morton --- scripts/checkstack.pl | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-) diff --git a/scripts/checkstack.pl b/scripts/checkstack.pl index 84f5fb7f1cec..ac74f8629cea 100755 --- a/scripts/checkstack.pl +++ b/scripts/checkstack.pl @@ -139,15 +139,11 @@ $total_size = 0; while (my $line = ) { if ($line =~ m/$funcre/) { $func = $1; - next if $line !~ m/^($xs*)/; + next if $line !~ m/^($x*)/; if ($total_size > $min_stack) { push @stack, "$intro$total_size\n"; } - - $addr = $1; - $addr =~ s/ /0/g; - $addr = "0x$addr"; - + $addr = "0x$1"; $intro = "$addr $func [$file]:"; my $padlen = 56 - length($intro); while ($padlen > 0) { -- cgit v1.2.3 From 0263f92fadbb9d294d5971ac57743f882c93b2b3 Mon Sep 17 00:00:00 2001 From: Ming Lei Date: Mon, 20 Nov 2023 16:35:59 +0800 Subject: lib/group_cpus.c: avoid acquiring cpu hotplug lock in group_cpus_evenly group_cpus_evenly() could be part of storage driver's error handler, such as nvme driver, when may happen during CPU hotplug, in which storage queue has to drain its pending IOs because all CPUs associated with the queue are offline and the queue is becoming inactive. And handling IO needs error handler to provide forward progress. Then deadlock is caused: 1) inside CPU hotplug handler, CPU hotplug lock is held, and blk-mq's handler is waiting for inflight IO 2) error handler is waiting for CPU hotplug lock 3) inflight IO can't be completed in blk-mq's CPU hotplug handler because error handling can't provide forward progress. Solve the deadlock by not holding CPU hotplug lock in group_cpus_evenly(), in which two stage spreads are taken: 1) the 1st stage is over all present CPUs; 2) the end stage is over all other CPUs. Turns out the two stage spread just needs consistent 'cpu_present_mask', and remove the CPU hotplug lock by storing it into one local cache. This way doesn't change correctness, because all CPUs are still covered. Link: https://lkml.kernel.org/r/20231120083559.285174-1-ming.lei@redhat.com Signed-off-by: Ming Lei Reported-by: Yi Zhang Reported-by: Guangwu Zhang Tested-by: Guangwu Zhang Reviewed-by: Chengming Zhou Reviewed-by: Jens Axboe Cc: Keith Busch Cc: Signed-off-by: Andrew Morton --- lib/group_cpus.c | 22 ++++++++++++++++------ 1 file changed, 16 insertions(+), 6 deletions(-) diff --git a/lib/group_cpus.c b/lib/group_cpus.c index aa3f6815bb12..ee272c4cefcc 100644 --- a/lib/group_cpus.c +++ b/lib/group_cpus.c @@ -366,13 +366,25 @@ struct cpumask *group_cpus_evenly(unsigned int numgrps) if (!masks) goto fail_node_to_cpumask; - /* Stabilize the cpumasks */ - cpus_read_lock(); build_node_to_cpumask(node_to_cpumask); + /* + * Make a local cache of 'cpu_present_mask', so the two stages + * spread can observe consistent 'cpu_present_mask' without holding + * cpu hotplug lock, then we can reduce deadlock risk with cpu + * hotplug code. + * + * Here CPU hotplug may happen when reading `cpu_present_mask`, and + * we can live with the case because it only affects that hotplug + * CPU is handled in the 1st or 2nd stage, and either way is correct + * from API user viewpoint since 2-stage spread is sort of + * optimization. + */ + cpumask_copy(npresmsk, data_race(cpu_present_mask)); + /* grouping present CPUs first */ ret = __group_cpus_evenly(curgrp, numgrps, node_to_cpumask, - cpu_present_mask, nmsk, masks); + npresmsk, nmsk, masks); if (ret < 0) goto fail_build_affinity; nr_present = ret; @@ -387,15 +399,13 @@ struct cpumask *group_cpus_evenly(unsigned int numgrps) curgrp = 0; else curgrp = nr_present; - cpumask_andnot(npresmsk, cpu_possible_mask, cpu_present_mask); + cpumask_andnot(npresmsk, cpu_possible_mask, npresmsk); ret = __group_cpus_evenly(curgrp, numgrps, node_to_cpumask, npresmsk, nmsk, masks); if (ret >= 0) nr_others = ret; fail_build_affinity: - cpus_read_unlock(); - if (ret >= 0) WARN_ON(nr_present + nr_others < numgrps); -- cgit v1.2.3 From 1f3730fd9e8d4d77fb99c60d0e6ad4b1104e7e04 Mon Sep 17 00:00:00 2001 From: SeongJae Park Date: Sun, 19 Nov 2023 17:15:28 +0000 Subject: mm/damon/core: copy nr_accesses when splitting region Regions split function ('damon_split_region_at()') is called at the beginning of an aggregation interval, and when DAMOS applying the actions and charging quota. Because 'nr_accesses' fields of all regions are reset at the beginning of each aggregation interval, and DAMOS was applying the action at the end of each aggregation interval, there was no need to copy the 'nr_accesses' field to the split-out region. However, commit 42f994b71404 ("mm/damon/core: implement scheme-specific apply interval") made DAMOS applies action on its own timing interval. Hence, 'nr_accesses' should also copied to split-out regions, but the commit didn't. Fix it by copying it. Link: https://lkml.kernel.org/r/20231119171529.66863-1-sj@kernel.org Fixes: 42f994b71404 ("mm/damon/core: implement scheme-specific apply interval") Signed-off-by: SeongJae Park Signed-off-by: Andrew Morton --- mm/damon/core.c | 1 + 1 file changed, 1 insertion(+) diff --git a/mm/damon/core.c b/mm/damon/core.c index 6262d55904e7..ce1562783e7e 100644 --- a/mm/damon/core.c +++ b/mm/damon/core.c @@ -1225,6 +1225,7 @@ static void damon_split_region_at(struct damon_target *t, new->age = r->age; new->last_nr_accesses = r->last_nr_accesses; new->nr_accesses_bp = r->nr_accesses_bp; + new->nr_accesses = r->nr_accesses; damon_insert_region(new, r, damon_next_region(r), t); } -- cgit v1.2.3 From f39fb633fe9b9a4a7572ec32debf766d971a500b Mon Sep 17 00:00:00 2001 From: Nico Pache Date: Mon, 20 Nov 2023 15:29:08 -0700 Subject: selftests/mm: prevent duplicate runs caused by TEST_GEN_PROGS Commit 05f1edac8009 ("selftests/mm: run all tests from run_vmtests.sh") fixed the inconsistency caused by tests being defined as TEST_GEN_PROGS. This issue was leading to tests not being executed via run_vmtests.sh and furthermore some tests running twice due to the kselftests wrapper also executing them. Fix the definition of two tests (soft-dirty and pagemap_ioctl) that are still incorrectly defined. Link: https://lkml.kernel.org/r/20231120222908.28559-1-npache@redhat.com Signed-off-by: Nico Pache Reviewed-by: David Hildenbrand Cc: Joel Savitz Cc: Shuah Khan Signed-off-by: Andrew Morton --- tools/testing/selftests/mm/Makefile | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/tools/testing/selftests/mm/Makefile b/tools/testing/selftests/mm/Makefile index 78dfec8bc676..dede0bcf97a3 100644 --- a/tools/testing/selftests/mm/Makefile +++ b/tools/testing/selftests/mm/Makefile @@ -60,7 +60,7 @@ TEST_GEN_FILES += mrelease_test TEST_GEN_FILES += mremap_dontunmap TEST_GEN_FILES += mremap_test TEST_GEN_FILES += on-fault-limit -TEST_GEN_PROGS += pagemap_ioctl +TEST_GEN_FILES += pagemap_ioctl TEST_GEN_FILES += thuge-gen TEST_GEN_FILES += transhuge-stress TEST_GEN_FILES += uffd-stress @@ -72,7 +72,7 @@ TEST_GEN_FILES += mdwe_test TEST_GEN_FILES += hugetlb_fault_after_madv ifneq ($(ARCH),arm64) -TEST_GEN_PROGS += soft-dirty +TEST_GEN_FILES += soft-dirty endif ifeq ($(ARCH),x86_64) -- cgit v1.2.3 From 97219cc358ad156ec5b170c2ed6f44278932c63c Mon Sep 17 00:00:00 2001 From: Peter Xu Date: Thu, 23 Nov 2023 17:42:04 -0500 Subject: mm/Kconfig: make userfaultfd a menuconfig PTE_MARKER_UFFD_WP is a subconfig for userfaultfd. To make it clear, switch to use menuconfig for userfaultfd. Link: https://lkml.kernel.org/r/20231123224204.1060152-1-peterx@redhat.com Signed-off-by: Peter Xu Cc: Andrea Arcangeli Cc: Axel Rasmussen Cc: Mike Rapoport (IBM) Cc: Peter Xu Signed-off-by: Andrew Morton --- mm/Kconfig | 16 +++++++++------- 1 file changed, 9 insertions(+), 7 deletions(-) diff --git a/mm/Kconfig b/mm/Kconfig index 89971a894b60..57cd378c73d6 100644 --- a/mm/Kconfig +++ b/mm/Kconfig @@ -1201,13 +1201,6 @@ config ANON_VMA_NAME area from being merged with adjacent virtual memory areas due to the difference in their name. -config USERFAULTFD - bool "Enable userfaultfd() system call" - depends on MMU - help - Enable the userfaultfd() system call that allows to intercept and - handle page faults in userland. - config HAVE_ARCH_USERFAULTFD_WP bool help @@ -1218,6 +1211,14 @@ config HAVE_ARCH_USERFAULTFD_MINOR help Arch has userfaultfd minor fault support +menuconfig USERFAULTFD + bool "Enable userfaultfd() system call" + depends on MMU + help + Enable the userfaultfd() system call that allows to intercept and + handle page faults in userland. + +if USERFAULTFD config PTE_MARKER_UFFD_WP bool "Userfaultfd write protection support for shmem/hugetlbfs" default y @@ -1227,6 +1228,7 @@ config PTE_MARKER_UFFD_WP Allows to create marker PTEs for userfaultfd write protection purposes. It is required to enable userfaultfd write protection on file-backed memory types like shmem and hugetlbfs. +endif # USERFAULTFD # multi-gen LRU { config LRU_GEN -- cgit v1.2.3 From 854f2764b5771e450b44e6a5fddb6872deb5bb56 Mon Sep 17 00:00:00 2001 From: Kuan-Ying Lee Date: Mon, 27 Nov 2023 15:04:01 +0800 Subject: scripts/gdb/tasks: fix lx-ps command error Since commit 8e1f385104ac ("kill task_struct->thread_group") remove the thread_group, we will encounter below issue. (gdb) lx-ps TASK PID COMM 0xffff800086503340 0 swapper/0 Python Exception : There is no member named thread_group. Error occurred in Python: There is no member named thread_group. We use signal->thread_head to iterate all threads instead. [Kuan-Ying.Lee@mediatek.com: v2] Link: https://lkml.kernel.org/r/20231129065142.13375-2-Kuan-Ying.Lee@mediatek.com Link: https://lkml.kernel.org/r/20231127070404.4192-2-Kuan-Ying.Lee@mediatek.com Fixes: 8e1f385104ac ("kill task_struct->thread_group") Signed-off-by: Kuan-Ying Lee Acked-by: Oleg Nesterov Tested-by: Florian Fainelli Cc: AngeloGioacchino Del Regno Cc: Chinwen Chang Cc: Kuan-Ying Lee Cc: Matthias Brugger Cc: Qun-Wei Lin Cc: Andrey Konovalov Signed-off-by: Andrew Morton --- scripts/gdb/linux/tasks.py | 18 +++++++----------- 1 file changed, 7 insertions(+), 11 deletions(-) diff --git a/scripts/gdb/linux/tasks.py b/scripts/gdb/linux/tasks.py index 17ec19e9b5bf..aa5ab6251f76 100644 --- a/scripts/gdb/linux/tasks.py +++ b/scripts/gdb/linux/tasks.py @@ -13,7 +13,7 @@ import gdb -from linux import utils +from linux import utils, lists task_type = utils.CachedType("struct task_struct") @@ -22,19 +22,15 @@ task_type = utils.CachedType("struct task_struct") def task_lists(): task_ptr_type = task_type.get_type().pointer() init_task = gdb.parse_and_eval("init_task").address - t = g = init_task + t = init_task while True: - while True: - yield t + thread_head = t['signal']['thread_head'] + for thread in lists.list_for_each_entry(thread_head, task_ptr_type, 'thread_node'): + yield thread - t = utils.container_of(t['thread_group']['next'], - task_ptr_type, "thread_group") - if t == g: - break - - t = g = utils.container_of(g['tasks']['next'], - task_ptr_type, "tasks") + t = utils.container_of(t['tasks']['next'], + task_ptr_type, "tasks") if t == init_task: return -- cgit v1.2.3 From 7d6fa31a2fd7072376b3c8be66bf8527b2c8208c Mon Sep 17 00:00:00 2001 From: SeongJae Park Date: Fri, 24 Nov 2023 21:38:40 +0000 Subject: mm/damon/sysfs-schemes: add timeout for update_schemes_tried_regions If a scheme is set to not applied to any monitoring target region for any reasons including the target access pattern, quota, filters, or watermarks, writing 'update_schemes_tried_regions' to 'state' DAMON sysfs file can indefinitely hang. Fix the case by implementing a timeout for the operation. The time limit is two apply intervals of each scheme. Link: https://lkml.kernel.org/r/20231124213840.39157-1-sj@kernel.org Fixes: 4d4e41b68299 ("mm/damon/sysfs-schemes: do not update tried regions more than one DAMON snapshot") Signed-off-by: SeongJae Park Signed-off-by: Andrew Morton --- mm/damon/sysfs-schemes.c | 49 ++++++++++++++++++++++++++++++++++++++++++------ 1 file changed, 43 insertions(+), 6 deletions(-) diff --git a/mm/damon/sysfs-schemes.c b/mm/damon/sysfs-schemes.c index be667236b8e6..fe0fe2562000 100644 --- a/mm/damon/sysfs-schemes.c +++ b/mm/damon/sysfs-schemes.c @@ -139,6 +139,13 @@ static const struct kobj_type damon_sysfs_scheme_region_ktype = { * damon_sysfs_before_damos_apply() understands the situation by showing the * 'finished' status and do nothing. * + * If DAMOS is not applied to any region due to any reasons including the + * access pattern, the watermarks, the quotas, and the filters, + * ->before_damos_apply() will not be called back. Until the situation is + * changed, the update will not be finished. To avoid this, + * damon_sysfs_after_sampling() set the status as 'finished' if more than two + * apply intervals of the scheme is passed while the state is 'idle'. + * * Finally, the tried regions request handling finisher function * (damon_sysfs_schemes_update_regions_stop()) unregisters the callbacks. */ @@ -154,6 +161,7 @@ struct damon_sysfs_scheme_regions { int nr_regions; unsigned long total_bytes; enum damos_sysfs_regions_upd_status upd_status; + unsigned long upd_timeout_jiffies; }; static struct damon_sysfs_scheme_regions * @@ -1854,7 +1862,9 @@ static int damon_sysfs_after_sampling(struct damon_ctx *ctx) for (i = 0; i < sysfs_schemes->nr; i++) { sysfs_regions = sysfs_schemes->schemes_arr[i]->tried_regions; if (sysfs_regions->upd_status == - DAMOS_TRIED_REGIONS_UPD_STARTED) + DAMOS_TRIED_REGIONS_UPD_STARTED || + time_after(jiffies, + sysfs_regions->upd_timeout_jiffies)) sysfs_regions->upd_status = DAMOS_TRIED_REGIONS_UPD_FINISHED; } @@ -1885,14 +1895,41 @@ int damon_sysfs_schemes_clear_regions( return 0; } +static struct damos *damos_sysfs_nth_scheme(int n, struct damon_ctx *ctx) +{ + struct damos *scheme; + int i = 0; + + damon_for_each_scheme(scheme, ctx) { + if (i == n) + return scheme; + i++; + } + return NULL; +} + static void damos_tried_regions_init_upd_status( - struct damon_sysfs_schemes *sysfs_schemes) + struct damon_sysfs_schemes *sysfs_schemes, + struct damon_ctx *ctx) { int i; + struct damos *scheme; + struct damon_sysfs_scheme_regions *sysfs_regions; - for (i = 0; i < sysfs_schemes->nr; i++) - sysfs_schemes->schemes_arr[i]->tried_regions->upd_status = - DAMOS_TRIED_REGIONS_UPD_IDLE; + for (i = 0; i < sysfs_schemes->nr; i++) { + sysfs_regions = sysfs_schemes->schemes_arr[i]->tried_regions; + scheme = damos_sysfs_nth_scheme(i, ctx); + if (!scheme) { + sysfs_regions->upd_status = + DAMOS_TRIED_REGIONS_UPD_FINISHED; + continue; + } + sysfs_regions->upd_status = DAMOS_TRIED_REGIONS_UPD_IDLE; + sysfs_regions->upd_timeout_jiffies = jiffies + + 2 * usecs_to_jiffies(scheme->apply_interval_us ? + scheme->apply_interval_us : + ctx->attrs.sample_interval); + } } /* Called from damon_sysfs_cmd_request_callback under damon_sysfs_lock */ @@ -1902,7 +1939,7 @@ int damon_sysfs_schemes_update_regions_start( { damon_sysfs_schemes_clear_regions(sysfs_schemes, ctx); damon_sysfs_schemes_for_damos_callback = sysfs_schemes; - damos_tried_regions_init_upd_status(sysfs_schemes); + damos_tried_regions_init_upd_status(sysfs_schemes, ctx); damos_regions_upd_total_bytes_only = total_bytes_only; ctx->callback.before_damos_apply = damon_sysfs_before_damos_apply; ctx->callback.after_sampling = damon_sysfs_after_sampling; -- cgit v1.2.3 From 4e9e2e4c65136dfd32dd0afe555961433d1cf906 Mon Sep 17 00:00:00 2001 From: Baoquan He Date: Tue, 28 Nov 2023 13:52:48 +0800 Subject: drivers/base/cpu: crash data showing should depends on KEXEC_CORE After commit 88a6f8994421 ("crash: memory and CPU hotplug sysfs attributes"), on x86_64, if only below kernel configs related to kdump are set, compiling error are triggered. ---- CONFIG_CRASH_CORE=y CONFIG_KEXEC_CORE=y CONFIG_CRASH_DUMP=y CONFIG_CRASH_HOTPLUG=y ------ ------------------------------------------------------ drivers/base/cpu.c: In function `crash_hotplug_show': drivers/base/cpu.c:309:40: error: implicit declaration of function `crash_hotplug_cpu_support'; did you mean `crash_hotplug_show'? [-Werror=implicit-function-declaration] 309 | return sysfs_emit(buf, "%d\n", crash_hotplug_cpu_support()); | ^~~~~~~~~~~~~~~~~~~~~~~~~ | crash_hotplug_show cc1: some warnings being treated as errors ------------------------------------------------------ CONFIG_KEXEC is used to enable kexec_load interface, the crash_notes/crash_notes_size/crash_hotplug showing depends on CONFIG_KEXEC is incorrect. It should depend on KEXEC_CORE instead. Fix it now. Link: https://lkml.kernel.org/r/20231128055248.659808-1-bhe@redhat.com Fixes: 88a6f8994421 ("crash: memory and CPU hotplug sysfs attributes") Signed-off-by: Baoquan He Tested-by: Ignat Korchagin [compile-time only] Tested-by: Alexander Gordeev Reviewed-by: Eric DeVolder Cc: Signed-off-by: Andrew Morton --- drivers/base/cpu.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/base/cpu.c b/drivers/base/cpu.c index 9ea22e165acd..548491de818e 100644 --- a/drivers/base/cpu.c +++ b/drivers/base/cpu.c @@ -144,7 +144,7 @@ static DEVICE_ATTR(release, S_IWUSR, NULL, cpu_release_store); #endif /* CONFIG_ARCH_CPU_PROBE_RELEASE */ #endif /* CONFIG_HOTPLUG_CPU */ -#ifdef CONFIG_KEXEC +#ifdef CONFIG_KEXEC_CORE #include static ssize_t crash_notes_show(struct device *dev, @@ -189,14 +189,14 @@ static const struct attribute_group crash_note_cpu_attr_group = { #endif static const struct attribute_group *common_cpu_attr_groups[] = { -#ifdef CONFIG_KEXEC +#ifdef CONFIG_KEXEC_CORE &crash_note_cpu_attr_group, #endif NULL }; static const struct attribute_group *hotplugable_cpu_attr_groups[] = { -#ifdef CONFIG_KEXEC +#ifdef CONFIG_KEXEC_CORE &crash_note_cpu_attr_group, #endif NULL -- cgit v1.2.3 From 8e92157d7f6190c86bfd6144a409001469827100 Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Tue, 28 Nov 2023 19:44:03 +0200 Subject: units: add missing header BITS_PER_BYTE is defined in bits.h. Link: https://lkml.kernel.org/r/20231128174404.393393-1-andriy.shevchenko@linux.intel.com Fixes: e8eed5f7366f ("units: Add BYTES_PER_*BIT") Signed-off-by: Andy Shevchenko Reviewed-by: Randy Dunlap Cc: Damian Muszynski Cc: Rasmus Villemoes Cc: Herbert Xu Signed-off-by: Andrew Morton --- include/linux/units.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/linux/units.h b/include/linux/units.h index ff1bd6b5f5b3..45110daaf8d3 100644 --- a/include/linux/units.h +++ b/include/linux/units.h @@ -2,6 +2,7 @@ #ifndef _LINUX_UNITS_H #define _LINUX_UNITS_H +#include #include /* Metric prefixes in accordance with Système international (d'unités) */ -- cgit v1.2.3 From dccf78d39f1069a5ddf4328bf0c97aa5f2f4296e Mon Sep 17 00:00:00 2001 From: Baoquan He Date: Tue, 28 Nov 2023 13:44:57 +0800 Subject: kernel/Kconfig.kexec: drop select of KEXEC for CRASH_DUMP Ignat Korchagin complained that a potential config regression was introduced by commit 89cde455915f ("kexec: consolidate kexec and crash options into kernel/Kconfig.kexec"). Before the commit, CONFIG_CRASH_DUMP has no dependency on CONFIG_KEXEC. After the commit, CRASH_DUMP selects KEXEC. That enforces system to have CONFIG_KEXEC=y as long as CONFIG_CRASH_DUMP=Y which people may not want. In Ignat's case, he sets CONFIG_CRASH_DUMP=y, CONFIG_KEXEC_FILE=y and CONFIG_KEXEC=n because kexec_load interface could have security issue if kernel/initrd has no chance to be signed and verified. CRASH_DUMP has select of KEXEC because Eric, author of above commit, met a LKP report of build failure when posting patch of earlier version. Please see below link to get detail of the LKP report: https://lore.kernel.org/all/3e8eecd1-a277-2cfb-690e-5de2eb7b988e@oracle.com/T/#u In fact, that LKP report is triggered because arm's is wrapped in CONFIG_KEXEC ifdeffery scope. That is wrong. CONFIG_KEXEC controls the enabling/disabling of kexec_load interface, but not kexec feature. Removing the wrongly added CONFIG_KEXEC ifdeffery scope in of arm allows us to drop the select KEXEC for CRASH_DUMP. Meanwhile, change arch/arm/kernel/Makefile to let machine_kexec.o relocate_kernel.o depend on KEXEC_CORE. Link: https://lkml.kernel.org/r/20231128054457.659452-1-bhe@redhat.com Fixes: 89cde455915f ("kexec: consolidate kexec and crash options into kernel/Kconfig.kexec") Signed-off-by: Baoquan He Reported-by: Ignat Korchagin Tested-by: Ignat Korchagin [compile-time only] Tested-by: Alexander Gordeev Reviewed-by: Eric DeVolder Tested-by: Eric DeVolder Signed-off-by: Andrew Morton --- arch/arm/include/asm/kexec.h | 4 ---- arch/arm/kernel/Makefile | 2 +- kernel/Kconfig.kexec | 1 - 3 files changed, 1 insertion(+), 6 deletions(-) diff --git a/arch/arm/include/asm/kexec.h b/arch/arm/include/asm/kexec.h index e62832dcba76..a8287e7ab9d4 100644 --- a/arch/arm/include/asm/kexec.h +++ b/arch/arm/include/asm/kexec.h @@ -2,8 +2,6 @@ #ifndef _ARM_KEXEC_H #define _ARM_KEXEC_H -#ifdef CONFIG_KEXEC - /* Maximum physical address we can use pages from */ #define KEXEC_SOURCE_MEMORY_LIMIT (-1UL) /* Maximum address we can reach in physical address mode */ @@ -82,6 +80,4 @@ static inline struct page *boot_pfn_to_page(unsigned long boot_pfn) #endif /* __ASSEMBLY__ */ -#endif /* CONFIG_KEXEC */ - #endif /* _ARM_KEXEC_H */ diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile index d53f56d6f840..771264d4726a 100644 --- a/arch/arm/kernel/Makefile +++ b/arch/arm/kernel/Makefile @@ -59,7 +59,7 @@ obj-$(CONFIG_FUNCTION_TRACER) += entry-ftrace.o obj-$(CONFIG_DYNAMIC_FTRACE) += ftrace.o insn.o patch.o obj-$(CONFIG_FUNCTION_GRAPH_TRACER) += ftrace.o insn.o patch.o obj-$(CONFIG_JUMP_LABEL) += jump_label.o insn.o patch.o -obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o +obj-$(CONFIG_KEXEC_CORE) += machine_kexec.o relocate_kernel.o # Main staffs in KPROBES are in arch/arm/probes/ . obj-$(CONFIG_KPROBES) += patch.o insn.o obj-$(CONFIG_OABI_COMPAT) += sys_oabi-compat.o diff --git a/kernel/Kconfig.kexec b/kernel/Kconfig.kexec index 7aff28ded2f4..1cc3b1c595d7 100644 --- a/kernel/Kconfig.kexec +++ b/kernel/Kconfig.kexec @@ -97,7 +97,6 @@ config CRASH_DUMP depends on ARCH_SUPPORTS_KEXEC select CRASH_CORE select KEXEC_CORE - select KEXEC help Generate crash dump after being started by kexec. This should be normally only set in special crash dump kernels -- cgit v1.2.3 From d61d0ab573649789bf9eb909c89a1a193b2e3d10 Mon Sep 17 00:00:00 2001 From: Ryusuke Konishi Date: Wed, 29 Nov 2023 23:15:47 +0900 Subject: nilfs2: fix missing error check for sb_set_blocksize call When mounting a filesystem image with a block size larger than the page size, nilfs2 repeatedly outputs long error messages with stack traces to the kernel log, such as the following: getblk(): invalid block size 8192 requested logical block size: 512 ... Call Trace: dump_stack_lvl+0x92/0xd4 dump_stack+0xd/0x10 bdev_getblk+0x33a/0x354 __breadahead+0x11/0x80 nilfs_search_super_root+0xe2/0x704 [nilfs2] load_nilfs+0x72/0x504 [nilfs2] nilfs_mount+0x30f/0x518 [nilfs2] legacy_get_tree+0x1b/0x40 vfs_get_tree+0x18/0xc4 path_mount+0x786/0xa88 __ia32_sys_mount+0x147/0x1a8 __do_fast_syscall_32+0x56/0xc8 do_fast_syscall_32+0x29/0x58 do_SYSENTER_32+0x15/0x18 entry_SYSENTER_32+0x98/0xf1 ... This overloads the system logger. And to make matters worse, it sometimes crashes the kernel with a memory access violation. This is because the return value of the sb_set_blocksize() call, which should be checked for errors, is not checked. The latter issue is due to out-of-buffer memory being accessed based on a large block size that caused sb_set_blocksize() to fail for buffers read with the initial minimum block size that remained unupdated in the super_block structure. Since nilfs2 mkfs tool does not accept block sizes larger than the system page size, this has been overlooked. However, it is possible to create this situation by intentionally modifying the tool or by passing a filesystem image created on a system with a large page size to a system with a smaller page size and mounting it. Fix this issue by inserting the expected error handling for the call to sb_set_blocksize(). Link: https://lkml.kernel.org/r/20231129141547.4726-1-konishi.ryusuke@gmail.com Signed-off-by: Ryusuke Konishi Tested-by: Ryusuke Konishi Cc: Signed-off-by: Andrew Morton --- fs/nilfs2/the_nilfs.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/fs/nilfs2/the_nilfs.c b/fs/nilfs2/the_nilfs.c index 0f0667957c81..71400496ed36 100644 --- a/fs/nilfs2/the_nilfs.c +++ b/fs/nilfs2/the_nilfs.c @@ -716,7 +716,11 @@ int init_nilfs(struct the_nilfs *nilfs, struct super_block *sb, char *data) goto failed_sbh; } nilfs_release_super_block(nilfs); - sb_set_blocksize(sb, blocksize); + if (!sb_set_blocksize(sb, blocksize)) { + nilfs_err(sb, "bad blocksize %d", blocksize); + err = -EINVAL; + goto out; + } err = nilfs_load_super_block(nilfs, sb, blocksize, &sbp); if (err) -- cgit v1.2.3 From 73424d00dc63ba681856e06cfb0a5abbdb62e2b5 Mon Sep 17 00:00:00 2001 From: Su Hui Date: Thu, 30 Nov 2023 11:40:18 +0800 Subject: highmem: fix a memory copy problem in memcpy_from_folio Clang static checker complains that value stored to 'from' is never read. And memcpy_from_folio() only copy the last chunk memory from folio to destination. Use 'to += chunk' to replace 'from += chunk' to fix this typo problem. Link: https://lkml.kernel.org/r/20231130034017.1210429-1-suhui@nfschina.com Fixes: b23d03ef7af5 ("highmem: add memcpy_to_folio() and memcpy_from_folio()") Signed-off-by: Su Hui Reviewed-by: Matthew Wilcox (Oracle) Cc: Ira Weiny Cc: Jiaqi Yan Cc: Nathan Chancellor Cc: Nick Desaulniers Cc: Peter Collingbourne Cc: Tom Rix Cc: Tony Luck Cc: Signed-off-by: Andrew Morton --- include/linux/highmem.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/linux/highmem.h b/include/linux/highmem.h index 4cacc0e43b51..be20cff4ba73 100644 --- a/include/linux/highmem.h +++ b/include/linux/highmem.h @@ -454,7 +454,7 @@ static inline void memcpy_from_folio(char *to, struct folio *folio, memcpy(to, from, chunk); kunmap_local(from); - from += chunk; + to += chunk; offset += chunk; len -= chunk; } while (len > 0); -- cgit v1.2.3 From bc220fe70919d6500811e5e1e07aff43e137065a Mon Sep 17 00:00:00 2001 From: Bagas Sanjaya Date: Thu, 30 Nov 2023 15:38:48 +0700 Subject: MAINTAINERS: drop Antti Palosaari MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit He is currently inactive (last message from him is two years ago [1]). His media tree [2] is also dormant (latest activity is 6 years ago), yet his site is still online [3]. Drop him from MAINTAINERS and add CREDITS entry for him. We thank him for maintaining various DVB drivers. [1]: https://lore.kernel.org/all/660772b3-0597-02db-ed94-c6a9be04e8e8@iki.fi/ [2]: https://git.linuxtv.org/anttip/media_tree.git/ [3]: https://palosaari.fi/linux/ Link: https://lkml.kernel.org/r/20231130083848.5396-1-bagasdotme@gmail.com Signed-off-by: Bagas Sanjaya Acked-by: Antti Palosaari Cc: Hans Verkuil Cc: Lukas Bulwahn Cc: Mauro Carvalho Chehab Cc: Uwe Kleine-König Signed-off-by: Andrew Morton --- CREDITS | 8 +++ MAINTAINERS | 179 +++++++++++++----------------------------------------------- 2 files changed, 45 insertions(+), 142 deletions(-) diff --git a/CREDITS b/CREDITS index f33a33fd2371..81845c39e3cf 100644 --- a/CREDITS +++ b/CREDITS @@ -2944,6 +2944,14 @@ D: IPX development and support N: Venkatesh Pallipadi (Venki) D: x86/HPET +N: Antti Palosaari +E: crope@iki.fi +D: Various DVB drivers +W: https://palosaari.fi/linux/ +S: Yliopistokatu 1 D 513 +S: FI-90570 Oulu +S: FINLAND + N: Kyungmin Park E: kyungmin.park@samsung.com D: Samsung S5Pv210 and Exynos4210 mobile platforms diff --git a/MAINTAINERS b/MAINTAINERS index 633fc9f22cda..f60da8fb3f54 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -171,13 +171,10 @@ S: Supported F: drivers/soc/fujitsu/a64fx-diag.c A8293 MEDIA DRIVER -M: Antti Palosaari L: linux-media@vger.kernel.org -S: Maintained +S: Orphan W: https://linuxtv.org -W: http://palosaari.fi/linux/ Q: http://patchwork.linuxtv.org/project/linux-media/list/ -T: git git://linuxtv.org/anttip/media_tree.git F: drivers/media/dvb-frontends/a8293* AACRAID SCSI RAID DRIVER @@ -576,23 +573,17 @@ F: drivers/iio/accel/adxl372_i2c.c F: drivers/iio/accel/adxl372_spi.c AF9013 MEDIA DRIVER -M: Antti Palosaari L: linux-media@vger.kernel.org -S: Maintained +S: Orphan W: https://linuxtv.org -W: http://palosaari.fi/linux/ Q: http://patchwork.linuxtv.org/project/linux-media/list/ -T: git git://linuxtv.org/anttip/media_tree.git F: drivers/media/dvb-frontends/af9013* AF9033 MEDIA DRIVER -M: Antti Palosaari L: linux-media@vger.kernel.org -S: Maintained +S: Orphan W: https://linuxtv.org -W: http://palosaari.fi/linux/ Q: http://patchwork.linuxtv.org/project/linux-media/list/ -T: git git://linuxtv.org/anttip/media_tree.git F: drivers/media/dvb-frontends/af9033* AFFS FILE SYSTEM @@ -650,13 +641,10 @@ F: fs/aio.c F: include/linux/*aio*.h AIRSPY MEDIA DRIVER -M: Antti Palosaari L: linux-media@vger.kernel.org -S: Maintained +S: Orphan W: https://linuxtv.org -W: http://palosaari.fi/linux/ Q: http://patchwork.linuxtv.org/project/linux-media/list/ -T: git git://linuxtv.org/anttip/media_tree.git F: drivers/media/usb/airspy/ ALACRITECH GIGABIT ETHERNET DRIVER @@ -5605,13 +5593,10 @@ F: Documentation/driver-api/media/drivers/cx88* F: drivers/media/pci/cx88/ CXD2820R MEDIA DRIVER -M: Antti Palosaari L: linux-media@vger.kernel.org -S: Maintained +S: Orphan W: https://linuxtv.org -W: http://palosaari.fi/linux/ Q: http://patchwork.linuxtv.org/project/linux-media/list/ -T: git git://linuxtv.org/anttip/media_tree.git F: drivers/media/dvb-frontends/cxd2820r* CXGB3 ETHERNET DRIVER (CXGB3) @@ -5724,13 +5709,10 @@ F: Documentation/devicetree/bindings/input/cypress-sf.yaml F: drivers/input/keyboard/cypress-sf.c CYPRESS_FIRMWARE MEDIA DRIVER -M: Antti Palosaari L: linux-media@vger.kernel.org -S: Maintained +S: Orphan W: https://linuxtv.org -W: http://palosaari.fi/linux/ Q: http://patchwork.linuxtv.org/project/linux-media/list/ -T: git git://linuxtv.org/anttip/media_tree.git F: drivers/media/common/cypress_firmware* CYTTSP TOUCHSCREEN DRIVER @@ -7320,53 +7302,38 @@ T: git git://linuxtv.org/media_tree.git F: drivers/media/pci/dt3155/ DVB_USB_AF9015 MEDIA DRIVER -M: Antti Palosaari L: linux-media@vger.kernel.org -S: Maintained +S: Orphan W: https://linuxtv.org -W: http://palosaari.fi/linux/ Q: http://patchwork.linuxtv.org/project/linux-media/list/ -T: git git://linuxtv.org/anttip/media_tree.git F: drivers/media/usb/dvb-usb-v2/af9015* DVB_USB_AF9035 MEDIA DRIVER -M: Antti Palosaari L: linux-media@vger.kernel.org -S: Maintained +S: Orphan W: https://linuxtv.org -W: http://palosaari.fi/linux/ Q: http://patchwork.linuxtv.org/project/linux-media/list/ -T: git git://linuxtv.org/anttip/media_tree.git F: drivers/media/usb/dvb-usb-v2/af9035* DVB_USB_ANYSEE MEDIA DRIVER -M: Antti Palosaari L: linux-media@vger.kernel.org -S: Maintained +S: Orphan W: https://linuxtv.org -W: http://palosaari.fi/linux/ Q: http://patchwork.linuxtv.org/project/linux-media/list/ -T: git git://linuxtv.org/anttip/media_tree.git F: drivers/media/usb/dvb-usb-v2/anysee* DVB_USB_AU6610 MEDIA DRIVER -M: Antti Palosaari L: linux-media@vger.kernel.org -S: Maintained +S: Orphan W: https://linuxtv.org -W: http://palosaari.fi/linux/ Q: http://patchwork.linuxtv.org/project/linux-media/list/ -T: git git://linuxtv.org/anttip/media_tree.git F: drivers/media/usb/dvb-usb-v2/au6610* DVB_USB_CE6230 MEDIA DRIVER -M: Antti Palosaari L: linux-media@vger.kernel.org -S: Maintained +S: Orphan W: https://linuxtv.org -W: http://palosaari.fi/linux/ Q: http://patchwork.linuxtv.org/project/linux-media/list/ -T: git git://linuxtv.org/anttip/media_tree.git F: drivers/media/usb/dvb-usb-v2/ce6230* DVB_USB_CXUSB MEDIA DRIVER @@ -7380,22 +7347,17 @@ T: git git://linuxtv.org/media_tree.git F: drivers/media/usb/dvb-usb/cxusb* DVB_USB_EC168 MEDIA DRIVER -M: Antti Palosaari L: linux-media@vger.kernel.org -S: Maintained +S: Orphan W: https://linuxtv.org -W: http://palosaari.fi/linux/ Q: http://patchwork.linuxtv.org/project/linux-media/list/ -T: git git://linuxtv.org/anttip/media_tree.git F: drivers/media/usb/dvb-usb-v2/ec168* DVB_USB_GL861 MEDIA DRIVER -M: Antti Palosaari L: linux-media@vger.kernel.org -S: Maintained +S: Orphan W: https://linuxtv.org Q: http://patchwork.linuxtv.org/project/linux-media/list/ -T: git git://linuxtv.org/anttip/media_tree.git F: drivers/media/usb/dvb-usb-v2/gl861* DVB_USB_MXL111SF MEDIA DRIVER @@ -7409,23 +7371,18 @@ T: git git://linuxtv.org/mkrufky/mxl111sf.git F: drivers/media/usb/dvb-usb-v2/mxl111sf* DVB_USB_RTL28XXU MEDIA DRIVER -M: Antti Palosaari L: linux-media@vger.kernel.org -S: Maintained +S: Orphan W: https://linuxtv.org -W: http://palosaari.fi/linux/ Q: http://patchwork.linuxtv.org/project/linux-media/list/ -T: git git://linuxtv.org/anttip/media_tree.git F: drivers/media/usb/dvb-usb-v2/rtl28xxu* DVB_USB_V2 MEDIA DRIVER -M: Antti Palosaari L: linux-media@vger.kernel.org -S: Maintained +S: Orphan W: https://linuxtv.org W: http://palosaari.fi/linux/ Q: http://patchwork.linuxtv.org/project/linux-media/list/ -T: git git://linuxtv.org/anttip/media_tree.git F: drivers/media/usb/dvb-usb-v2/dvb_usb* F: drivers/media/usb/dvb-usb-v2/usb_urb.c @@ -7467,13 +7424,10 @@ F: Documentation/devicetree/bindings/input/e3x0-button.txt F: drivers/input/misc/e3x0-button.c E4000 MEDIA DRIVER -M: Antti Palosaari L: linux-media@vger.kernel.org -S: Maintained +S: Orphan W: https://linuxtv.org -W: http://palosaari.fi/linux/ Q: http://patchwork.linuxtv.org/project/linux-media/list/ -T: git git://linuxtv.org/anttip/media_tree.git F: drivers/media/tuners/e4000* EARTH_PT1 MEDIA DRIVER @@ -7489,13 +7443,10 @@ S: Odd Fixes F: drivers/media/pci/pt3/ EC100 MEDIA DRIVER -M: Antti Palosaari L: linux-media@vger.kernel.org -S: Maintained +S: Orphan W: https://linuxtv.org -W: http://palosaari.fi/linux/ Q: http://patchwork.linuxtv.org/project/linux-media/list/ -T: git git://linuxtv.org/anttip/media_tree.git F: drivers/media/dvb-frontends/ec100* ECRYPT FILE SYSTEM @@ -8113,13 +8064,10 @@ F: drivers/media/tuners/fc0011.c F: drivers/media/tuners/fc0011.h FC2580 MEDIA DRIVER -M: Antti Palosaari L: linux-media@vger.kernel.org -S: Maintained +S: Orphan W: https://linuxtv.org -W: http://palosaari.fi/linux/ Q: http://patchwork.linuxtv.org/project/linux-media/list/ -T: git git://linuxtv.org/anttip/media_tree.git F: drivers/media/tuners/fc2580* FCOE SUBSYSTEM (libfc, libfcoe, fcoe) @@ -9249,13 +9197,10 @@ F: include/trace/events/habanalabs.h F: include/uapi/drm/habanalabs_accel.h HACKRF MEDIA DRIVER -M: Antti Palosaari L: linux-media@vger.kernel.org -S: Maintained +S: Orphan W: https://linuxtv.org -W: http://palosaari.fi/linux/ Q: http://patchwork.linuxtv.org/project/linux-media/list/ -T: git git://linuxtv.org/anttip/media_tree.git F: drivers/media/usb/hackrf/ HANDSHAKE UPCALL FOR TRANSPORT LAYER SECURITY @@ -11328,13 +11273,10 @@ F: Documentation/hwmon/it87.rst F: drivers/hwmon/it87.c IT913X MEDIA DRIVER -M: Antti Palosaari L: linux-media@vger.kernel.org -S: Maintained +S: Orphan W: https://linuxtv.org -W: http://palosaari.fi/linux/ Q: http://patchwork.linuxtv.org/project/linux-media/list/ -T: git git://linuxtv.org/anttip/media_tree.git F: drivers/media/tuners/it913x* ITE IT66121 HDMI BRIDGE DRIVER @@ -12694,13 +12636,10 @@ W: http://www.tazenda.demon.co.uk/phil/linux-hp F: arch/m68k/hp300/ M88DS3103 MEDIA DRIVER -M: Antti Palosaari L: linux-media@vger.kernel.org -S: Maintained +S: Orphan W: https://linuxtv.org -W: http://palosaari.fi/linux/ Q: http://patchwork.linuxtv.org/project/linux-media/list/ -T: git git://linuxtv.org/anttip/media_tree.git F: drivers/media/dvb-frontends/m88ds3103* M88RS2000 MEDIA DRIVER @@ -14594,20 +14533,16 @@ F: include/asm-generic/tlb.h F: mm/mmu_gather.c MN88472 MEDIA DRIVER -M: Antti Palosaari L: linux-media@vger.kernel.org -S: Maintained +S: Orphan W: https://linuxtv.org -W: http://palosaari.fi/linux/ Q: http://patchwork.linuxtv.org/project/linux-media/list/ F: drivers/media/dvb-frontends/mn88472* MN88473 MEDIA DRIVER -M: Antti Palosaari L: linux-media@vger.kernel.org -S: Maintained +S: Orphan W: https://linuxtv.org -W: http://palosaari.fi/linux/ Q: http://patchwork.linuxtv.org/project/linux-media/list/ F: drivers/media/dvb-frontends/mn88473* @@ -14695,23 +14630,17 @@ S: Orphan F: drivers/platform/x86/msi-wmi.c MSI001 MEDIA DRIVER -M: Antti Palosaari L: linux-media@vger.kernel.org -S: Maintained +S: Orphan W: https://linuxtv.org -W: http://palosaari.fi/linux/ Q: http://patchwork.linuxtv.org/project/linux-media/list/ -T: git git://linuxtv.org/anttip/media_tree.git F: drivers/media/tuners/msi001* MSI2500 MEDIA DRIVER -M: Antti Palosaari L: linux-media@vger.kernel.org -S: Maintained +S: Orphan W: https://linuxtv.org -W: http://palosaari.fi/linux/ Q: http://patchwork.linuxtv.org/project/linux-media/list/ -T: git git://linuxtv.org/anttip/media_tree.git F: drivers/media/usb/msi2500/ MSTAR INTERRUPT CONTROLLER DRIVER @@ -17782,13 +17711,10 @@ F: drivers/bus/fsl-mc/ F: include/uapi/linux/fsl_mc.h QT1010 MEDIA DRIVER -M: Antti Palosaari L: linux-media@vger.kernel.org -S: Maintained +S: Orphan W: https://linuxtv.org -W: http://palosaari.fi/linux/ Q: http://patchwork.linuxtv.org/project/linux-media/list/ -T: git git://linuxtv.org/anttip/media_tree.git F: drivers/media/tuners/qt1010* QUALCOMM ATH12K WIRELESS DRIVER @@ -18841,33 +18767,24 @@ S: Maintained F: drivers/tty/rpmsg_tty.c RTL2830 MEDIA DRIVER -M: Antti Palosaari L: linux-media@vger.kernel.org -S: Maintained +S: Orphan W: https://linuxtv.org -W: http://palosaari.fi/linux/ Q: http://patchwork.linuxtv.org/project/linux-media/list/ -T: git git://linuxtv.org/anttip/media_tree.git F: drivers/media/dvb-frontends/rtl2830* RTL2832 MEDIA DRIVER -M: Antti Palosaari L: linux-media@vger.kernel.org -S: Maintained +S: Orphan W: https://linuxtv.org -W: http://palosaari.fi/linux/ Q: http://patchwork.linuxtv.org/project/linux-media/list/ -T: git git://linuxtv.org/anttip/media_tree.git F: drivers/media/dvb-frontends/rtl2832* RTL2832_SDR MEDIA DRIVER -M: Antti Palosaari L: linux-media@vger.kernel.org -S: Maintained +S: Orphan W: https://linuxtv.org -W: http://palosaari.fi/linux/ Q: http://patchwork.linuxtv.org/project/linux-media/list/ -T: git git://linuxtv.org/anttip/media_tree.git F: drivers/media/dvb-frontends/rtl2832_sdr* RTL8180 WIRELESS DRIVER @@ -19677,13 +19594,10 @@ F: drivers/media/platform/renesas/sh_vou.c F: include/media/drv-intf/sh_vou.h SI2157 MEDIA DRIVER -M: Antti Palosaari L: linux-media@vger.kernel.org -S: Maintained +S: Orphan W: https://linuxtv.org -W: http://palosaari.fi/linux/ Q: http://patchwork.linuxtv.org/project/linux-media/list/ -T: git git://linuxtv.org/anttip/media_tree.git F: drivers/media/tuners/si2157* SI2165 MEDIA DRIVER @@ -19695,13 +19609,10 @@ Q: http://patchwork.linuxtv.org/project/linux-media/list/ F: drivers/media/dvb-frontends/si2165* SI2168 MEDIA DRIVER -M: Antti Palosaari L: linux-media@vger.kernel.org -S: Maintained +S: Orphan W: https://linuxtv.org -W: http://palosaari.fi/linux/ Q: http://patchwork.linuxtv.org/project/linux-media/list/ -T: git git://linuxtv.org/anttip/media_tree.git F: drivers/media/dvb-frontends/si2168* SI470X FM RADIO RECEIVER I2C DRIVER @@ -21203,33 +21114,24 @@ W: http://tcp-lp-mod.sourceforge.net/ F: net/ipv4/tcp_lp.c TDA10071 MEDIA DRIVER -M: Antti Palosaari L: linux-media@vger.kernel.org -S: Maintained +S: Orphan W: https://linuxtv.org -W: http://palosaari.fi/linux/ Q: http://patchwork.linuxtv.org/project/linux-media/list/ -T: git git://linuxtv.org/anttip/media_tree.git F: drivers/media/dvb-frontends/tda10071* TDA18212 MEDIA DRIVER -M: Antti Palosaari L: linux-media@vger.kernel.org -S: Maintained +S: Orphan W: https://linuxtv.org -W: http://palosaari.fi/linux/ Q: http://patchwork.linuxtv.org/project/linux-media/list/ -T: git git://linuxtv.org/anttip/media_tree.git F: drivers/media/tuners/tda18212* TDA18218 MEDIA DRIVER -M: Antti Palosaari L: linux-media@vger.kernel.org -S: Maintained +S: Orphan W: https://linuxtv.org -W: http://palosaari.fi/linux/ Q: http://patchwork.linuxtv.org/project/linux-media/list/ -T: git git://linuxtv.org/anttip/media_tree.git F: drivers/media/tuners/tda18218* TDA18250 MEDIA DRIVER @@ -22164,13 +22066,10 @@ F: include/uapi/linux/serial_core.h F: include/uapi/linux/tty.h TUA9001 MEDIA DRIVER -M: Antti Palosaari L: linux-media@vger.kernel.org -S: Maintained +S: Orphan W: https://linuxtv.org -W: http://palosaari.fi/linux/ Q: http://patchwork.linuxtv.org/project/linux-media/list/ -T: git git://linuxtv.org/anttip/media_tree.git F: drivers/media/tuners/tua9001* TULIP NETWORK DRIVERS @@ -24115,20 +24014,16 @@ S: Orphan F: drivers/net/wireless/zydas/zd1211rw/ ZD1301 MEDIA DRIVER -M: Antti Palosaari L: linux-media@vger.kernel.org -S: Maintained +S: Orphan W: https://linuxtv.org/ -W: http://palosaari.fi/linux/ Q: https://patchwork.linuxtv.org/project/linux-media/list/ F: drivers/media/usb/dvb-usb-v2/zd1301* ZD1301_DEMOD MEDIA DRIVER -M: Antti Palosaari L: linux-media@vger.kernel.org -S: Maintained +S: Orphan W: https://linuxtv.org/ -W: http://palosaari.fi/linux/ Q: https://patchwork.linuxtv.org/project/linux-media/list/ F: drivers/media/dvb-frontends/zd1301_demod* -- cgit v1.2.3 From 801a2b1b49f4dcf06703130922806e9c639c2ca8 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Wed, 29 Nov 2023 20:33:16 -0800 Subject: scripts/gdb: fix lx-device-list-bus and lx-device-list-class After the conversion to bus_to_subsys() and class_to_subsys(), the gdb scripts listing the system buses and classes respectively was broken, fix those by returning the subsys_priv pointer and have the various caller de-reference either the 'bus' or 'class' structure members accordingly. Link: https://lkml.kernel.org/r/20231130043317.174188-1-florian.fainelli@broadcom.com Fixes: 7b884b7f24b4 ("driver core: class.c: convert to only use class_to_subsys") Signed-off-by: Florian Fainelli Tested-by: Kuan-Ying Lee Cc: Greg Kroah-Hartman Cc: Jan Kiszka Cc: Kieran Bingham Signed-off-by: Andrew Morton --- scripts/gdb/linux/device.py | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/scripts/gdb/linux/device.py b/scripts/gdb/linux/device.py index 16376c5cfec6..0eabc5f4f8ca 100644 --- a/scripts/gdb/linux/device.py +++ b/scripts/gdb/linux/device.py @@ -36,26 +36,26 @@ def for_each_bus(): for kobj in kset_for_each_object(gdb.parse_and_eval('bus_kset')): subsys = container_of(kobj, kset_type.get_type().pointer(), 'kobj') subsys_priv = container_of(subsys, subsys_private_type.get_type().pointer(), 'subsys') - yield subsys_priv['bus'] + yield subsys_priv def for_each_class(): for kobj in kset_for_each_object(gdb.parse_and_eval('class_kset')): subsys = container_of(kobj, kset_type.get_type().pointer(), 'kobj') subsys_priv = container_of(subsys, subsys_private_type.get_type().pointer(), 'subsys') - yield subsys_priv['class'] + yield subsys_priv def get_bus_by_name(name): for item in for_each_bus(): - if item['name'].string() == name: + if item['bus']['name'].string() == name: return item raise gdb.GdbError("Can't find bus type {!r}".format(name)) def get_class_by_name(name): for item in for_each_class(): - if item['name'].string() == name: + if item['class']['name'].string() == name: return item raise gdb.GdbError("Can't find device class {!r}".format(name)) @@ -70,13 +70,13 @@ def klist_for_each(klist): def bus_for_each_device(bus): - for kn in klist_for_each(bus['p']['klist_devices']): + for kn in klist_for_each(bus['klist_devices']): dp = container_of(kn, device_private_type.get_type().pointer(), 'knode_bus') yield dp['device'] def class_for_each_device(cls): - for kn in klist_for_each(cls['p']['klist_devices']): + for kn in klist_for_each(cls['klist_devices']): dp = container_of(kn, device_private_type.get_type().pointer(), 'knode_class') yield dp['device'] @@ -103,7 +103,7 @@ class LxDeviceListBus(gdb.Command): def invoke(self, arg, from_tty): if not arg: for bus in for_each_bus(): - gdb.write('bus {}:\t{}\n'.format(bus['name'].string(), bus)) + gdb.write('bus {}:\t{}\n'.format(bus['bus']['name'].string(), bus)) for dev in bus_for_each_device(bus): _show_device(dev, level=1) else: @@ -123,7 +123,7 @@ class LxDeviceListClass(gdb.Command): def invoke(self, arg, from_tty): if not arg: for cls in for_each_class(): - gdb.write("class {}:\t{}\n".format(cls['name'].string(), cls)) + gdb.write("class {}:\t{}\n".format(cls['class']['name'].string(), cls)) for dev in class_for_each_device(cls): _show_device(dev, level=1) else: -- cgit v1.2.3 From 4a3ef6be03e6700037fc20e63aa5ffd972e435ca Mon Sep 17 00:00:00 2001 From: Sidhartha Kumar Date: Mon, 4 Dec 2023 10:32:34 -0800 Subject: mm/hugetlb: have CONFIG_HUGETLB_PAGE select CONFIG_XARRAY_MULTI After commit a08c7193e4f1 "mm/filemap: remove hugetlb special casing in filemap.c", hugetlb pages are stored in the page cache in base page sized indexes. This leads to multi index stores in the xarray which is only supporting through CONFIG_XARRAY_MULTI. The other page cache user of multi index stores ,THP, selects XARRAY_MULTI. Have CONFIG_HUGETLB_PAGE follow this behavior as well to avoid the BUG() with a CONFIG_HUGETLB_PAGE && !CONFIG_XARRAY_MULTI config. Link: https://lkml.kernel.org/r/20231204183234.348697-1-sidhartha.kumar@oracle.com Fixes: a08c7193e4f1 ("mm/filemap: remove hugetlb special casing in filemap.c") Signed-off-by: Sidhartha Kumar Reported-by: Al Viro Cc: Mike Kravetz Cc: Muchun Song Signed-off-by: Andrew Morton --- fs/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/fs/Kconfig b/fs/Kconfig index fd1f655b4f1f..42837617a55b 100644 --- a/fs/Kconfig +++ b/fs/Kconfig @@ -268,6 +268,7 @@ config HUGETLBFS config HUGETLB_PAGE def_bool HUGETLBFS + select XARRAY_MULTI config HUGETLB_PAGE_OPTIMIZE_VMEMMAP def_bool HUGETLB_PAGE -- cgit v1.2.3 From 675abf8df1353e0e3bde314993e0796c524cfbf0 Mon Sep 17 00:00:00 2001 From: Ryusuke Konishi Date: Tue, 5 Dec 2023 17:59:47 +0900 Subject: nilfs2: prevent WARNING in nilfs_sufile_set_segment_usage() If nilfs2 reads a disk image with corrupted segment usage metadata, and its segment usage information is marked as an error for the segment at the write location, nilfs_sufile_set_segment_usage() can trigger WARN_ONs during log writing. Segments newly allocated for writing with nilfs_sufile_alloc() will not have this error flag set, but this unexpected situation will occur if the segment indexed by either nilfs->ns_segnum or nilfs->ns_nextnum (active segment) was marked in error. Fix this issue by inserting a sanity check to treat it as a file system corruption. Since error returns are not allowed during the execution phase where nilfs_sufile_set_segment_usage() is used, this inserts the sanity check into nilfs_sufile_mark_dirty() which pre-reads the buffer containing the segment usage record to be updated and sets it up in a dirty state for writing. In addition, nilfs_sufile_set_segment_usage() is also called when canceling log writing and undoing segment usage update, so in order to avoid issuing the same kernel warning in that case, in case of cancellation, avoid checking the error flag in nilfs_sufile_set_segment_usage(). Link: https://lkml.kernel.org/r/20231205085947.4431-1-konishi.ryusuke@gmail.com Signed-off-by: Ryusuke Konishi Reported-by: syzbot+14e9f834f6ddecece094@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=14e9f834f6ddecece094 Tested-by: Ryusuke Konishi Cc: Signed-off-by: Andrew Morton --- fs/nilfs2/sufile.c | 42 +++++++++++++++++++++++++++++++++++------- 1 file changed, 35 insertions(+), 7 deletions(-) diff --git a/fs/nilfs2/sufile.c b/fs/nilfs2/sufile.c index 2c6078a6b8ec..58ca7c936393 100644 --- a/fs/nilfs2/sufile.c +++ b/fs/nilfs2/sufile.c @@ -501,15 +501,38 @@ int nilfs_sufile_mark_dirty(struct inode *sufile, __u64 segnum) down_write(&NILFS_MDT(sufile)->mi_sem); ret = nilfs_sufile_get_segment_usage_block(sufile, segnum, 0, &bh); - if (!ret) { - mark_buffer_dirty(bh); - nilfs_mdt_mark_dirty(sufile); - kaddr = kmap_atomic(bh->b_page); - su = nilfs_sufile_block_get_segment_usage(sufile, segnum, bh, kaddr); + if (ret) + goto out_sem; + + kaddr = kmap_atomic(bh->b_page); + su = nilfs_sufile_block_get_segment_usage(sufile, segnum, bh, kaddr); + if (unlikely(nilfs_segment_usage_error(su))) { + struct the_nilfs *nilfs = sufile->i_sb->s_fs_info; + + kunmap_atomic(kaddr); + brelse(bh); + if (nilfs_segment_is_active(nilfs, segnum)) { + nilfs_error(sufile->i_sb, + "active segment %llu is erroneous", + (unsigned long long)segnum); + } else { + /* + * Segments marked erroneous are never allocated by + * nilfs_sufile_alloc(); only active segments, ie, + * the segments indexed by ns_segnum or ns_nextnum, + * can be erroneous here. + */ + WARN_ON_ONCE(1); + } + ret = -EIO; + } else { nilfs_segment_usage_set_dirty(su); kunmap_atomic(kaddr); + mark_buffer_dirty(bh); + nilfs_mdt_mark_dirty(sufile); brelse(bh); } +out_sem: up_write(&NILFS_MDT(sufile)->mi_sem); return ret; } @@ -536,9 +559,14 @@ int nilfs_sufile_set_segment_usage(struct inode *sufile, __u64 segnum, kaddr = kmap_atomic(bh->b_page); su = nilfs_sufile_block_get_segment_usage(sufile, segnum, bh, kaddr); - WARN_ON(nilfs_segment_usage_error(su)); - if (modtime) + if (modtime) { + /* + * Check segusage error and set su_lastmod only when updating + * this entry with a valid timestamp, not for cancellation. + */ + WARN_ON_ONCE(nilfs_segment_usage_error(su)); su->su_lastmod = cpu_to_le64(modtime); + } su->su_nblocks = cpu_to_le32(nblocks); kunmap_atomic(kaddr); -- cgit v1.2.3 From b2f557a21bc8fffdcd65794eda8a854e024999f3 Mon Sep 17 00:00:00 2001 From: Jiexun Wang Date: Thu, 21 Sep 2023 20:27:51 +0800 Subject: mm/madvise: add cond_resched() in madvise_cold_or_pageout_pte_range() I conducted real-time testing and observed that madvise_cold_or_pageout_pte_range() causes significant latency under memory pressure, which can be effectively reduced by adding cond_resched() within the loop. I tested on the LicheePi 4A board using Cylictest for latency testing and Ftrace for latency tracing. The board uses TH1520 processor and has a memory size of 8GB. The kernel version is 6.5.0 with the PREEMPT_RT patch applied. The script I tested is as follows: echo wakeup_rt > /sys/kernel/tracing/current_tracer echo 1 > /sys/kernel/tracing/tracing_on echo 0 > /sys/kernel/tracing/tracing_max_latency stress-ng --vm 8 --vm-bytes 2G & cyclictest --mlockall --smp --priority=99 --distance=0 --duration=30m echo 0 > /sys/kernel/tracing/tracing_on cat /sys/kernel/tracing/trace The tracing results before modification are as follows: # tracer: wakeup_rt # # wakeup_rt latency trace v1.1.5 on 6.5.0-rt6-r1208-00003-g999d221864bf # -------------------------------------------------------------------- # latency: 2552 us, #6/6, CPU#3 | (M:preempt_rt VP:0, KP:0, SP:0 HP:0 #P:4) # ----------------- # | task: cyclictest-196 (uid:0 nice:0 policy:1 rt_prio:99) # ----------------- # # _--------=> CPU# # / _-------=> irqs-off/BH-disabled # | / _------=> need-resched # || / _-----=> need-resched-lazy # ||| / _----=> hardirq/softirq # |||| / _---=> preempt-depth # ||||| / _--=> preempt-lazy-depth # |||||| / _-=> migrate-disable # ||||||| / delay # cmd pid |||||||| time | caller # \ / |||||||| \ | / stress-n-206 3dn.h512 2us : 206:120:R + [003] 196: 0:R cyclictest stress-n-206 3dn.h512 7us : => __ftrace_trace_stack => __trace_stack => probe_wakeup => ttwu_do_activate => try_to_wake_up => wake_up_process => hrtimer_wakeup => __hrtimer_run_queues => hrtimer_interrupt => riscv_timer_interrupt => handle_percpu_devid_irq => generic_handle_domain_irq => riscv_intc_irq => handle_riscv_irq => do_irq stress-n-206 3dn.h512 9us#: 0 stress-n-206 3d...3.. 2544us : __schedule stress-n-206 3d...3.. 2545us : 206:120:R ==> [003] 196: 0:R cyclictest stress-n-206 3d...3.. 2551us : => __ftrace_trace_stack => __trace_stack => probe_wakeup_sched_switch => __schedule => preempt_schedule => migrate_enable => rt_spin_unlock => madvise_cold_or_pageout_pte_range => walk_pgd_range => __walk_page_range => walk_page_range => madvise_pageout => madvise_vma_behavior => do_madvise => sys_madvise => do_trap_ecall_u => ret_from_exception The tracing results after modification are as follows: # tracer: wakeup_rt # # wakeup_rt latency trace v1.1.5 on 6.5.0-rt6-r1208-00004-gca3876fc69a6-dirty # -------------------------------------------------------------------- # latency: 1689 us, #6/6, CPU#0 | (M:preempt_rt VP:0, KP:0, SP:0 HP:0 #P:4) # ----------------- # | task: cyclictest-217 (uid:0 nice:0 policy:1 rt_prio:99) # ----------------- # # _--------=> CPU# # / _-------=> irqs-off/BH-disabled # | / _------=> need-resched # || / _-----=> need-resched-lazy # ||| / _----=> hardirq/softirq # |||| / _---=> preempt-depth # ||||| / _--=> preempt-lazy-depth # |||||| / _-=> migrate-disable # ||||||| / delay # cmd pid |||||||| time | caller # \ / |||||||| \ | / stress-n-232 0dn.h413 1us+: 232:120:R + [000] 217: 0:R cyclictest stress-n-232 0dn.h413 12us : => __ftrace_trace_stack => __trace_stack => probe_wakeup => ttwu_do_activate => try_to_wake_up => wake_up_process => hrtimer_wakeup => __hrtimer_run_queues => hrtimer_interrupt => riscv_timer_interrupt => handle_percpu_devid_irq => generic_handle_domain_irq => riscv_intc_irq => handle_riscv_irq => do_irq stress-n-232 0dn.h413 19us#: 0 stress-n-232 0d...3.. 1671us : __schedule stress-n-232 0d...3.. 1676us+: 232:120:R ==> [000] 217: 0:R cyclictest stress-n-232 0d...3.. 1687us : => __ftrace_trace_stack => __trace_stack => probe_wakeup_sched_switch => __schedule => preempt_schedule => migrate_enable => free_unref_page_list => release_pages => free_pages_and_swap_cache => tlb_batch_pages_flush => tlb_flush_mmu => unmap_page_range => unmap_vmas => unmap_region => do_vmi_align_munmap.constprop.0 => do_vmi_munmap => __vm_munmap => sys_munmap => do_trap_ecall_u => ret_from_exception After the modification, the cause of maximum latency is no longer madvise_cold_or_pageout_pte_range(), so this modification can reduce the latency caused by madvise_cold_or_pageout_pte_range(). Currently the madvise_cold_or_pageout_pte_range() function exhibits significant latency under memory pressure, which can be effectively reduced by adding cond_resched() within the loop. When the batch_count reaches SWAP_CLUSTER_MAX, we reschedule the task to ensure fairness and avoid long lock holding times. Link: https://lkml.kernel.org/r/85363861af65fac66c7a98c251906afc0d9c8098.1695291046.git.wangjiexun@tinylab.org Signed-off-by: Jiexun Wang Cc: Zhangjin Wu Signed-off-by: Andrew Morton --- mm/madvise.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/mm/madvise.c b/mm/madvise.c index cf4d694280e9..6214a1ab5654 100644 --- a/mm/madvise.c +++ b/mm/madvise.c @@ -335,6 +335,7 @@ static int madvise_cold_or_pageout_pte_range(pmd_t *pmd, struct folio *folio = NULL; LIST_HEAD(folio_list); bool pageout_anon_only_filter; + unsigned int batch_count = 0; if (fatal_signal_pending(current)) return -EINTR; @@ -416,6 +417,7 @@ huge_unlock: regular_folio: #endif tlb_change_page_size(tlb, PAGE_SIZE); +restart: start_pte = pte = pte_offset_map_lock(vma->vm_mm, pmd, addr, &ptl); if (!start_pte) return 0; @@ -424,6 +426,15 @@ regular_folio: for (; addr < end; pte++, addr += PAGE_SIZE) { ptent = ptep_get(pte); + if (++batch_count == SWAP_CLUSTER_MAX) { + batch_count = 0; + if (need_resched()) { + pte_unmap_unlock(start_pte, ptl); + cond_resched(); + goto restart; + } + } + if (pte_none(ptent)) continue; -- cgit v1.2.3 From 61890dc28f7d9e9aac8a9471302613824c22fae4 Mon Sep 17 00:00:00 2001 From: Konstantin Aladyshev Date: Wed, 6 Dec 2023 11:07:44 +0300 Subject: usb: gadget: f_hid: fix report descriptor allocation The commit 89ff3dfac604 ("usb: gadget: f_hid: fix f_hidg lifetime vs cdev") has introduced a bug that leads to hid device corruption after the replug operation. Reverse device managed memory allocation for the report descriptor to fix the issue. Tested: This change was tested on the AMD EthanolX CRB server with the BMC based on the OpenBMC distribution. The BMC provides KVM functionality via the USB gadget device: - before: KVM page refresh results in a broken USB device, - after: KVM page refresh works without any issues. Fixes: 89ff3dfac604 ("usb: gadget: f_hid: fix f_hidg lifetime vs cdev") Cc: stable@vger.kernel.org Signed-off-by: Konstantin Aladyshev Link: https://lore.kernel.org/r/20231206080744.253-2-aladyshev22@gmail.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/function/f_hid.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/usb/gadget/function/f_hid.c b/drivers/usb/gadget/function/f_hid.c index ea85e2c701a1..3c8a9dd585c0 100644 --- a/drivers/usb/gadget/function/f_hid.c +++ b/drivers/usb/gadget/function/f_hid.c @@ -92,6 +92,7 @@ static void hidg_release(struct device *dev) { struct f_hidg *hidg = container_of(dev, struct f_hidg, dev); + kfree(hidg->report_desc); kfree(hidg->set_report_buf); kfree(hidg); } @@ -1287,9 +1288,9 @@ static struct usb_function *hidg_alloc(struct usb_function_instance *fi) hidg->report_length = opts->report_length; hidg->report_desc_length = opts->report_desc_length; if (opts->report_desc) { - hidg->report_desc = devm_kmemdup(&hidg->dev, opts->report_desc, - opts->report_desc_length, - GFP_KERNEL); + hidg->report_desc = kmemdup(opts->report_desc, + opts->report_desc_length, + GFP_KERNEL); if (!hidg->report_desc) { ret = -ENOMEM; goto err_put_device; -- cgit v1.2.3 From f0b9d97a77fa8f18400450713358303a435ab688 Mon Sep 17 00:00:00 2001 From: Andi Shyti Date: Mon, 4 Dec 2023 17:38:03 +0100 Subject: serial: ma35d1: Validate console index before assignment The console is immediately assigned to the ma35d1 port without checking its index. This oversight can lead to out-of-bounds errors when the index falls outside the valid '0' to MA35_UART_NR range. Such scenario trigges ran error like the following: UBSAN: array-index-out-of-bounds in drivers/tty/serial/ma35d1_serial.c:555:51 index -1 is out of range for type 'uart_ma35d1_port [17] Check the index before using it and bail out with a warning. Fixes: 930cbf92db01 ("tty: serial: Add Nuvoton ma35d1 serial driver support") Signed-off-by: Andi Shyti Cc: Jacky Huang Cc: # v6.5+ Link: https://lore.kernel.org/r/20231204163804.1331415-2-andi.shyti@kernel.org Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/ma35d1_serial.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/drivers/tty/serial/ma35d1_serial.c b/drivers/tty/serial/ma35d1_serial.c index a6a7c405892e..21b574f78b86 100644 --- a/drivers/tty/serial/ma35d1_serial.c +++ b/drivers/tty/serial/ma35d1_serial.c @@ -552,11 +552,19 @@ static void ma35d1serial_console_putchar(struct uart_port *port, unsigned char c */ static void ma35d1serial_console_write(struct console *co, const char *s, u32 count) { - struct uart_ma35d1_port *up = &ma35d1serial_ports[co->index]; + struct uart_ma35d1_port *up; unsigned long flags; int locked = 1; u32 ier; + if ((co->index < 0) || (co->index >= MA35_UART_NR)) { + pr_warn("Failed to write on ononsole port %x, out of range\n", + co->index); + return; + } + + up = &ma35d1serial_ports[co->index]; + if (up->port.sysrq) locked = 0; else if (oops_in_progress) -- cgit v1.2.3 From e92fad024929c79460403acf946bc9c09ce5c3a9 Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Tue, 5 Dec 2023 21:55:24 +0200 Subject: serial: 8250_dw: Add ACPI ID for Granite Rapids-D UART Granite Rapids-D has an additional UART that is enumerated via ACPI. Add ACPI ID for it. Signed-off-by: Andy Shevchenko Cc: stable Link: https://lore.kernel.org/r/20231205195524.2705965-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/8250/8250_dw.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c index b94f567647cb..e6218766d0c8 100644 --- a/drivers/tty/serial/8250/8250_dw.c +++ b/drivers/tty/serial/8250/8250_dw.c @@ -777,6 +777,7 @@ static const struct acpi_device_id dw8250_acpi_match[] = { { "INT33C5", (kernel_ulong_t)&dw8250_dw_apb }, { "INT3434", (kernel_ulong_t)&dw8250_dw_apb }, { "INT3435", (kernel_ulong_t)&dw8250_dw_apb }, + { "INTC10EE", (kernel_ulong_t)&dw8250_dw_apb }, { }, }; MODULE_DEVICE_TABLE(acpi, dw8250_acpi_match); -- cgit v1.2.3 From 1a031f6edc460e9562098bdedc3918da07c30a6e Mon Sep 17 00:00:00 2001 From: Cameron Williams Date: Thu, 2 Nov 2023 21:10:40 +0000 Subject: parport: Add support for Brainboxes IX/UC/PX parallel cards Adds support for Intashield IX-500/IX-550, UC-146/UC-157, PX-146/PX-157, PX-203 and PX-475 (LPT port) Cc: stable@vger.kernel.org Signed-off-by: Cameron Williams Acked-by: Sudip Mukherjee Link: https://lore.kernel.org/r/AS4PR02MB790389C130410BD864C8DCC9C4A6A@AS4PR02MB7903.eurprd02.prod.outlook.com Signed-off-by: Greg Kroah-Hartman --- drivers/parport/parport_pc.c | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) diff --git a/drivers/parport/parport_pc.c b/drivers/parport/parport_pc.c index 1f236aaf7867..f33b5d1ddfc1 100644 --- a/drivers/parport/parport_pc.c +++ b/drivers/parport/parport_pc.c @@ -2658,6 +2658,8 @@ enum parport_pc_pci_cards { asix_ax99100, quatech_sppxp100, wch_ch382l, + brainboxes_uc146, + brainboxes_px203, }; @@ -2737,6 +2739,8 @@ static struct parport_pc_pci { /* asix_ax99100 */ { 1, { { 0, 1 }, } }, /* quatech_sppxp100 */ { 1, { { 0, 1 }, } }, /* wch_ch382l */ { 1, { { 2, -1 }, } }, + /* brainboxes_uc146 */ { 1, { { 3, -1 }, } }, + /* brainboxes_px203 */ { 1, { { 0, -1 }, } }, }; static const struct pci_device_id parport_pc_pci_tbl[] = { @@ -2833,6 +2837,23 @@ static const struct pci_device_id parport_pc_pci_tbl[] = { PCI_ANY_ID, PCI_ANY_ID, 0, 0, quatech_sppxp100 }, /* WCH CH382L PCI-E single parallel port card */ { 0x1c00, 0x3050, 0x1c00, 0x3050, 0, 0, wch_ch382l }, + /* Brainboxes IX-500/550 */ + { PCI_VENDOR_ID_INTASHIELD, 0x402a, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, oxsemi_pcie_pport }, + /* Brainboxes UC-146/UC-157 */ + { PCI_VENDOR_ID_INTASHIELD, 0x0be1, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, brainboxes_uc146 }, + { PCI_VENDOR_ID_INTASHIELD, 0x0be2, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, brainboxes_uc146 }, + /* Brainboxes PX-146/PX-257 */ + { PCI_VENDOR_ID_INTASHIELD, 0x401c, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, oxsemi_pcie_pport }, + /* Brainboxes PX-203 */ + { PCI_VENDOR_ID_INTASHIELD, 0x4007, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, brainboxes_px203 }, + /* Brainboxes PX-475 */ + { PCI_VENDOR_ID_INTASHIELD, 0x401f, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, oxsemi_pcie_pport }, { 0, } /* terminate list */ }; MODULE_DEVICE_TABLE(pci, parport_pc_pci_tbl); -- cgit v1.2.3 From b7c1e53751cb3990153084f31c41f25fde3b629c Mon Sep 17 00:00:00 2001 From: Miquel Raynal Date: Fri, 24 Nov 2023 20:38:14 +0100 Subject: nvmem: Do not expect fixed layouts to grab a layout driver MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Two series lived in parallel for some time, which led to this situation: - The nvmem-layout container is used for dynamic layouts - We now expect fixed layouts to also use the nvmem-layout container but this does not require any additional driver, the support is built-in the nvmem core. Ensure we don't refuse to probe for wrong reasons. Fixes: 27f699e578b1 ("nvmem: core: add support for fixed cells *layout*") Cc: stable@vger.kernel.org Reported-by: Luca Ceresoli Signed-off-by: Miquel Raynal Tested-by: Rafał Miłecki Tested-by: Luca Ceresoli Reviewed-by: Luca Ceresoli Link: https://lore.kernel.org/r/20231124193814.360552-1-miquel.raynal@bootlin.com Signed-off-by: Greg Kroah-Hartman --- drivers/nvmem/core.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/nvmem/core.c b/drivers/nvmem/core.c index bf42b7e826db..608b352a7d91 100644 --- a/drivers/nvmem/core.c +++ b/drivers/nvmem/core.c @@ -796,6 +796,12 @@ static struct nvmem_layout *nvmem_layout_get(struct nvmem_device *nvmem) if (!layout_np) return NULL; + /* Fixed layouts don't have a matching driver */ + if (of_device_is_compatible(layout_np, "fixed-layout")) { + of_node_put(layout_np); + return NULL; + } + /* * In case the nvmem device was built-in while the layout was built as a * module, we shall manually request the layout driver loading otherwise -- cgit v1.2.3 From 73bf1c9ae6c054c53b8e84452c5e46f86dd28246 Mon Sep 17 00:00:00 2001 From: Xiang Yang Date: Sat, 12 Aug 2023 14:27:48 +0800 Subject: drm/exynos: fix a potential error pointer dereference Smatch reports the warning below: drivers/gpu/drm/exynos/exynos_hdmi.c:1864 hdmi_bind() error: 'crtc' dereferencing possible ERR_PTR() The return value of exynos_drm_crtc_get_by_type maybe ERR_PTR(-ENODEV), which can not be used directly. Fix this by checking the return value before using it. Signed-off-by: Xiang Yang Signed-off-by: Inki Dae --- drivers/gpu/drm/exynos/exynos_hdmi.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/gpu/drm/exynos/exynos_hdmi.c b/drivers/gpu/drm/exynos/exynos_hdmi.c index f3aaa4ea3e68..dd9903eab563 100644 --- a/drivers/gpu/drm/exynos/exynos_hdmi.c +++ b/drivers/gpu/drm/exynos/exynos_hdmi.c @@ -1861,6 +1861,8 @@ static int hdmi_bind(struct device *dev, struct device *master, void *data) return ret; crtc = exynos_drm_crtc_get_by_type(drm_dev, EXYNOS_DISPLAY_TYPE_HDMI); + if (IS_ERR(crtc)) + return PTR_ERR(crtc); crtc->pipe_clk = &hdata->phy_clk; ret = hdmi_create_connector(encoder); -- cgit v1.2.3 From 8d1b7809684c688005706125b804e1f9792d2b1b Mon Sep 17 00:00:00 2001 From: Inki Dae Date: Wed, 1 Nov 2023 18:36:51 +0900 Subject: drm/exynos: fix a wrong error checking Fix a wrong error checking in exynos_drm_dma.c module. In the exynos_drm_register_dma function, both arm_iommu_create_mapping() and iommu_get_domain_for_dev() functions are expected to return NULL as an error. However, the error checking is performed using the statement if(IS_ERR(mapping)), which doesn't provide a suitable error value. So check if 'mapping' is NULL, and if it is, return -ENODEV. This issue[1] was reported by Dan. Changelog v1: - fix build warning. [1] https://lore.kernel.org/all/33e52277-1349-472b-a55b-ab5c3462bfcf@moroto.mountain/ Reported-by : Dan Carpenter Signed-off-by: Inki Dae --- drivers/gpu/drm/exynos/exynos_drm_dma.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) diff --git a/drivers/gpu/drm/exynos/exynos_drm_dma.c b/drivers/gpu/drm/exynos/exynos_drm_dma.c index a971590b8132..e2c7373f20c6 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_dma.c +++ b/drivers/gpu/drm/exynos/exynos_drm_dma.c @@ -107,18 +107,16 @@ int exynos_drm_register_dma(struct drm_device *drm, struct device *dev, return 0; if (!priv->mapping) { - void *mapping; + void *mapping = NULL; if (IS_ENABLED(CONFIG_ARM_DMA_USE_IOMMU)) mapping = arm_iommu_create_mapping(&platform_bus_type, EXYNOS_DEV_ADDR_START, EXYNOS_DEV_ADDR_SIZE); else if (IS_ENABLED(CONFIG_IOMMU_DMA)) mapping = iommu_get_domain_for_dev(priv->dma_dev); - else - mapping = ERR_PTR(-ENODEV); - if (IS_ERR(mapping)) - return PTR_ERR(mapping); + if (!mapping) + return -ENODEV; priv->mapping = mapping; } -- cgit v1.2.3 From 3d501dd326fb1c73f1b8206d4c6e1d7b15c07e27 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Tue, 5 Dec 2023 16:18:41 +0000 Subject: tcp: do not accept ACK of bytes we never sent This patch is based on a detailed report and ideas from Yepeng Pan and Christian Rossow. ACK seq validation is currently following RFC 5961 5.2 guidelines: The ACK value is considered acceptable only if it is in the range of ((SND.UNA - MAX.SND.WND) <= SEG.ACK <= SND.NXT). All incoming segments whose ACK value doesn't satisfy the above condition MUST be discarded and an ACK sent back. It needs to be noted that RFC 793 on page 72 (fifth check) says: "If the ACK is a duplicate (SEG.ACK < SND.UNA), it can be ignored. If the ACK acknowledges something not yet sent (SEG.ACK > SND.NXT) then send an ACK, drop the segment, and return". The "ignored" above implies that the processing of the incoming data segment continues, which means the ACK value is treated as acceptable. This mitigation makes the ACK check more stringent since any ACK < SND.UNA wouldn't be accepted, instead only ACKs that are in the range ((SND.UNA - MAX.SND.WND) <= SEG.ACK <= SND.NXT) get through. This can be refined for new (and possibly spoofed) flows, by not accepting ACK for bytes that were never sent. This greatly improves TCP security at a little cost. I added a Fixes: tag to make sure this patch will reach stable trees, even if the 'blamed' patch was adhering to the RFC. tp->bytes_acked was added in linux-4.2 Following packetdrill test (courtesy of Yepeng Pan) shows the issue at hand: 0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3 +0 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0 +0 bind(3, ..., ...) = 0 +0 listen(3, 1024) = 0 // ---------------- Handshake ------------------- // // when window scale is set to 14 the window size can be extended to // 65535 * (2^14) = 1073725440. Linux would accept an ACK packet // with ack number in (Server_ISN+1-1073725440. Server_ISN+1) // ,though this ack number acknowledges some data never // sent by the server. +0 < S 0:0(0) win 65535 +0 > S. 0:0(0) ack 1 <...> +0 < . 1:1(0) ack 1 win 65535 +0 accept(3, ..., ...) = 4 // For the established connection, we send an ACK packet, // the ack packet uses ack number 1 - 1073725300 + 2^32, // where 2^32 is used to wrap around. // Note: we used 1073725300 instead of 1073725440 to avoid possible // edge cases. // 1 - 1073725300 + 2^32 = 3221241997 // Oops, old kernels happily accept this packet. +0 < . 1:1001(1000) ack 3221241997 win 65535 // After the kernel fix the following will be replaced by a challenge ACK, // and prior malicious frame would be dropped. +0 > . 1:1(0) ack 1001 Fixes: 354e4aa391ed ("tcp: RFC 5961 5.2 Blind Data Injection Attack Mitigation") Signed-off-by: Eric Dumazet Reported-by: Yepeng Pan Reported-by: Christian Rossow Acked-by: Neal Cardwell Link: https://lore.kernel.org/r/20231205161841.2702925-1-edumazet@google.com Signed-off-by: Jakub Kicinski --- net/ipv4/tcp_input.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c index 337c8bb07ccc..90de838a2745 100644 --- a/net/ipv4/tcp_input.c +++ b/net/ipv4/tcp_input.c @@ -3871,8 +3871,12 @@ static int tcp_ack(struct sock *sk, const struct sk_buff *skb, int flag) * then we can probably ignore it. */ if (before(ack, prior_snd_una)) { + u32 max_window; + + /* do not accept ACK for bytes we never sent. */ + max_window = min_t(u64, tp->max_window, tp->bytes_acked); /* RFC 5961 5.2 [Blind Data Injection Attack].[Mitigation] */ - if (before(ack, prior_snd_una - tp->max_window)) { + if (before(ack, prior_snd_una - max_window)) { if (!(flag & FLAG_NO_CHALLENGE_ACK)) tcp_send_challenge_ack(sk); return -SKB_DROP_REASON_TCP_TOO_OLD_ACK; -- cgit v1.2.3 From 0c7ed1f9197aecada33a08b022e484a97bf584ba Mon Sep 17 00:00:00 2001 From: Tobias Waldekranz Date: Tue, 5 Dec 2023 23:13:59 +0100 Subject: net: dsa: mv88e6xxx: Restore USXGMII support for 6393X In 4a56212774ac, USXGMII support was added for 6393X, but this was lost in the PCS conversion (the blamed commit), most likely because these efforts where more or less done in parallel. Restore this feature by porting Michal's patch to fit the new implementation. Reviewed-by: Florian Fainelli Tested-by: Michal Smulski Reviewed-by: Vladimir Oltean Fixes: e5b732a275f5 ("net: dsa: mv88e6xxx: convert 88e639x to phylink_pcs") Signed-off-by: Tobias Waldekranz Link: https://lore.kernel.org/r/20231205221359.3926018-1-tobias@waldekranz.com Signed-off-by: Jakub Kicinski --- drivers/net/dsa/mv88e6xxx/pcs-639x.c | 31 +++++++++++++++++++++++++++++-- 1 file changed, 29 insertions(+), 2 deletions(-) diff --git a/drivers/net/dsa/mv88e6xxx/pcs-639x.c b/drivers/net/dsa/mv88e6xxx/pcs-639x.c index 9a8429f5d09c..d758a6c1b226 100644 --- a/drivers/net/dsa/mv88e6xxx/pcs-639x.c +++ b/drivers/net/dsa/mv88e6xxx/pcs-639x.c @@ -465,6 +465,7 @@ mv88e639x_pcs_select(struct mv88e6xxx_chip *chip, int port, case PHY_INTERFACE_MODE_10GBASER: case PHY_INTERFACE_MODE_XAUI: case PHY_INTERFACE_MODE_RXAUI: + case PHY_INTERFACE_MODE_USXGMII: return &mpcs->xg_pcs; default: @@ -873,7 +874,8 @@ static int mv88e6393x_xg_pcs_post_config(struct phylink_pcs *pcs, struct mv88e639x_pcs *mpcs = xg_pcs_to_mv88e639x_pcs(pcs); int err; - if (interface == PHY_INTERFACE_MODE_10GBASER) { + if (interface == PHY_INTERFACE_MODE_10GBASER || + interface == PHY_INTERFACE_MODE_USXGMII) { err = mv88e6393x_erratum_5_2(mpcs); if (err) return err; @@ -886,12 +888,37 @@ static int mv88e6393x_xg_pcs_post_config(struct phylink_pcs *pcs, return mv88e639x_xg_pcs_enable(mpcs); } +static void mv88e6393x_xg_pcs_get_state(struct phylink_pcs *pcs, + struct phylink_link_state *state) +{ + struct mv88e639x_pcs *mpcs = xg_pcs_to_mv88e639x_pcs(pcs); + u16 status, lp_status; + int err; + + if (state->interface != PHY_INTERFACE_MODE_USXGMII) + return mv88e639x_xg_pcs_get_state(pcs, state); + + state->link = false; + + err = mv88e639x_read(mpcs, MV88E6390_USXGMII_PHY_STATUS, &status); + err = err ? : mv88e639x_read(mpcs, MV88E6390_USXGMII_LP_STATUS, &lp_status); + if (err) { + dev_err(mpcs->mdio.dev.parent, + "can't read USXGMII status: %pe\n", ERR_PTR(err)); + return; + } + + state->link = !!(status & MDIO_USXGMII_LINK); + state->an_complete = state->link; + phylink_decode_usxgmii_word(state, lp_status); +} + static const struct phylink_pcs_ops mv88e6393x_xg_pcs_ops = { .pcs_enable = mv88e6393x_xg_pcs_enable, .pcs_disable = mv88e6393x_xg_pcs_disable, .pcs_pre_config = mv88e6393x_xg_pcs_pre_config, .pcs_post_config = mv88e6393x_xg_pcs_post_config, - .pcs_get_state = mv88e639x_xg_pcs_get_state, + .pcs_get_state = mv88e6393x_xg_pcs_get_state, .pcs_config = mv88e639x_xg_pcs_config, }; -- cgit v1.2.3 From 8804fa04a492f4176ea407390052292912227820 Mon Sep 17 00:00:00 2001 From: Mario Limonciello Date: Wed, 6 Dec 2023 13:39:27 -0600 Subject: ALSA: hda/realtek: Add Framework laptop 16 to quirks The Framework 16" laptop has the same controller as other Framework models. Apply the presence detection quirk. Signed-off-by: Mario Limonciello Cc: Link: https://lore.kernel.org/r/20231206193927.2996-1-mario.limonciello@amd.com Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 51e1bfd7bdde..5b5f298870be 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -10273,6 +10273,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x8086, 0x2081, "Intel NUC 10", ALC256_FIXUP_INTEL_NUC10), SND_PCI_QUIRK(0x8086, 0x3038, "Intel NUC 13", ALC295_FIXUP_CHROME_BOOK), SND_PCI_QUIRK(0xf111, 0x0001, "Framework Laptop", ALC295_FIXUP_FRAMEWORK_LAPTOP_MIC_NO_PRESENCE), + SND_PCI_QUIRK(0xf111, 0x0005, "Framework Laptop", ALC295_FIXUP_FRAMEWORK_LAPTOP_MIC_NO_PRESENCE), SND_PCI_QUIRK(0xf111, 0x0006, "Framework Laptop", ALC295_FIXUP_FRAMEWORK_LAPTOP_MIC_NO_PRESENCE), #if 0 -- cgit v1.2.3 From eb99b1b72a424a79f56c972e0fd7ad01fe93a008 Mon Sep 17 00:00:00 2001 From: Ivan Orlov Date: Wed, 6 Dec 2023 22:32:11 +0000 Subject: ALSA: pcmtest: stop timer before buffer is released Stop timer in the 'trigger' and 'sync_stop' callbacks since we want the timer to be stopped before the DMA buffer is released. Otherwise, it could trigger a kernel panic in some circumstances, for instance when the DMA buffer is already released but the timer callback is still running. Signed-off-by: Ivan Orlov Link: https://lore.kernel.org/r/20231206223211.12761-1-ivan.orlov0322@gmail.com Signed-off-by: Takashi Iwai --- sound/drivers/pcmtest.c | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-) diff --git a/sound/drivers/pcmtest.c b/sound/drivers/pcmtest.c index b59b78a09224..b8bff5522bce 100644 --- a/sound/drivers/pcmtest.c +++ b/sound/drivers/pcmtest.c @@ -397,7 +397,6 @@ static int snd_pcmtst_pcm_close(struct snd_pcm_substream *substream) struct pcmtst_buf_iter *v_iter = substream->runtime->private_data; timer_shutdown_sync(&v_iter->timer_instance); - v_iter->substream = NULL; playback_capture_test = !v_iter->is_buf_corrupted; kfree(v_iter); return 0; @@ -435,6 +434,7 @@ static int snd_pcmtst_pcm_trigger(struct snd_pcm_substream *substream, int cmd) case SNDRV_PCM_TRIGGER_PAUSE_PUSH: // We can't call timer_shutdown_sync here, as it is forbidden to sleep here v_iter->suspend = true; + timer_delete(&v_iter->timer_instance); break; } @@ -512,12 +512,22 @@ static int snd_pcmtst_ioctl(struct snd_pcm_substream *substream, unsigned int cm return snd_pcm_lib_ioctl(substream, cmd, arg); } +static int snd_pcmtst_sync_stop(struct snd_pcm_substream *substream) +{ + struct pcmtst_buf_iter *v_iter = substream->runtime->private_data; + + timer_delete_sync(&v_iter->timer_instance); + + return 0; +} + static const struct snd_pcm_ops snd_pcmtst_playback_ops = { .open = snd_pcmtst_pcm_open, .close = snd_pcmtst_pcm_close, .trigger = snd_pcmtst_pcm_trigger, .hw_params = snd_pcmtst_pcm_hw_params, .ioctl = snd_pcmtst_ioctl, + .sync_stop = snd_pcmtst_sync_stop, .hw_free = snd_pcmtst_pcm_hw_free, .prepare = snd_pcmtst_pcm_prepare, .pointer = snd_pcmtst_pcm_pointer, @@ -530,6 +540,7 @@ static const struct snd_pcm_ops snd_pcmtst_capture_ops = { .hw_params = snd_pcmtst_pcm_hw_params, .hw_free = snd_pcmtst_pcm_hw_free, .ioctl = snd_pcmtst_ioctl, + .sync_stop = snd_pcmtst_sync_stop, .prepare = snd_pcmtst_pcm_prepare, .pointer = snd_pcmtst_pcm_pointer, }; -- cgit v1.2.3 From 0ad722bd9ee3a9bdfca9613148645e4c9b7f26cf Mon Sep 17 00:00:00 2001 From: Hui Zhou Date: Tue, 5 Dec 2023 11:26:25 +0200 Subject: nfp: flower: fix for take a mutex lock in soft irq context and rcu lock The neighbour event callback call the function nfp_tun_write_neigh, this function will take a mutex lock and it is in soft irq context, change the work queue to process the neighbour event. Move the nfp_tun_write_neigh function out of range rcu_read_lock/unlock() in function nfp_tunnel_request_route_v4 and nfp_tunnel_request_route_v6. Fixes: abc210952af7 ("nfp: flower: tunnel neigh support bond offload") CC: stable@vger.kernel.org # 6.2+ Signed-off-by: Hui Zhou Signed-off-by: Louis Peens Signed-off-by: David S. Miller --- .../ethernet/netronome/nfp/flower/tunnel_conf.c | 127 +++++++++++++++------ 1 file changed, 95 insertions(+), 32 deletions(-) diff --git a/drivers/net/ethernet/netronome/nfp/flower/tunnel_conf.c b/drivers/net/ethernet/netronome/nfp/flower/tunnel_conf.c index 060a77f2265d..e522845c7c21 100644 --- a/drivers/net/ethernet/netronome/nfp/flower/tunnel_conf.c +++ b/drivers/net/ethernet/netronome/nfp/flower/tunnel_conf.c @@ -160,6 +160,18 @@ struct nfp_tun_mac_addr_offload { u8 addr[ETH_ALEN]; }; +/** + * struct nfp_neigh_update_work - update neighbour information to nfp + * @work: Work queue for writing neigh to the nfp + * @n: neighbour entry + * @app: Back pointer to app + */ +struct nfp_neigh_update_work { + struct work_struct work; + struct neighbour *n; + struct nfp_app *app; +}; + enum nfp_flower_mac_offload_cmd { NFP_TUNNEL_MAC_OFFLOAD_ADD = 0, NFP_TUNNEL_MAC_OFFLOAD_DEL = 1, @@ -607,38 +619,30 @@ err: nfp_flower_cmsg_warn(app, "Neighbour configuration failed.\n"); } -static int -nfp_tun_neigh_event_handler(struct notifier_block *nb, unsigned long event, - void *ptr) +static void +nfp_tun_release_neigh_update_work(struct nfp_neigh_update_work *update_work) { - struct nfp_flower_priv *app_priv; - struct netevent_redirect *redir; - struct neighbour *n; + neigh_release(update_work->n); + kfree(update_work); +} + +static void nfp_tun_neigh_update(struct work_struct *work) +{ + struct nfp_neigh_update_work *update_work; struct nfp_app *app; + struct neighbour *n; bool neigh_invalid; int err; - switch (event) { - case NETEVENT_REDIRECT: - redir = (struct netevent_redirect *)ptr; - n = redir->neigh; - break; - case NETEVENT_NEIGH_UPDATE: - n = (struct neighbour *)ptr; - break; - default: - return NOTIFY_DONE; - } - - neigh_invalid = !(n->nud_state & NUD_VALID) || n->dead; - - app_priv = container_of(nb, struct nfp_flower_priv, tun.neigh_nb); - app = app_priv->app; + update_work = container_of(work, struct nfp_neigh_update_work, work); + app = update_work->app; + n = update_work->n; if (!nfp_flower_get_port_id_from_netdev(app, n->dev)) - return NOTIFY_DONE; + goto out; #if IS_ENABLED(CONFIG_INET) + neigh_invalid = !(n->nud_state & NUD_VALID) || n->dead; if (n->tbl->family == AF_INET6) { #if IS_ENABLED(CONFIG_IPV6) struct flowi6 flow6 = {}; @@ -655,13 +659,11 @@ nfp_tun_neigh_event_handler(struct notifier_block *nb, unsigned long event, dst = ip6_dst_lookup_flow(dev_net(n->dev), NULL, &flow6, NULL); if (IS_ERR(dst)) - return NOTIFY_DONE; + goto out; dst_release(dst); } nfp_tun_write_neigh(n->dev, app, &flow6, n, true, false); -#else - return NOTIFY_DONE; #endif /* CONFIG_IPV6 */ } else { struct flowi4 flow4 = {}; @@ -678,17 +680,71 @@ nfp_tun_neigh_event_handler(struct notifier_block *nb, unsigned long event, rt = ip_route_output_key(dev_net(n->dev), &flow4); err = PTR_ERR_OR_ZERO(rt); if (err) - return NOTIFY_DONE; + goto out; ip_rt_put(rt); } nfp_tun_write_neigh(n->dev, app, &flow4, n, false, false); } -#else - return NOTIFY_DONE; #endif /* CONFIG_INET */ +out: + nfp_tun_release_neigh_update_work(update_work); +} - return NOTIFY_OK; +static struct nfp_neigh_update_work * +nfp_tun_alloc_neigh_update_work(struct nfp_app *app, struct neighbour *n) +{ + struct nfp_neigh_update_work *update_work; + + update_work = kzalloc(sizeof(*update_work), GFP_ATOMIC); + if (!update_work) + return NULL; + + INIT_WORK(&update_work->work, nfp_tun_neigh_update); + neigh_hold(n); + update_work->n = n; + update_work->app = app; + + return update_work; +} + +static int +nfp_tun_neigh_event_handler(struct notifier_block *nb, unsigned long event, + void *ptr) +{ + struct nfp_neigh_update_work *update_work; + struct nfp_flower_priv *app_priv; + struct netevent_redirect *redir; + struct neighbour *n; + struct nfp_app *app; + + switch (event) { + case NETEVENT_REDIRECT: + redir = (struct netevent_redirect *)ptr; + n = redir->neigh; + break; + case NETEVENT_NEIGH_UPDATE: + n = (struct neighbour *)ptr; + break; + default: + return NOTIFY_DONE; + } +#if IS_ENABLED(CONFIG_IPV6) + if (n->tbl != ipv6_stub->nd_tbl && n->tbl != &arp_tbl) +#else + if (n->tbl != &arp_tbl) +#endif + return NOTIFY_DONE; + + app_priv = container_of(nb, struct nfp_flower_priv, tun.neigh_nb); + app = app_priv->app; + update_work = nfp_tun_alloc_neigh_update_work(app, n); + if (!update_work) + return NOTIFY_DONE; + + queue_work(system_highpri_wq, &update_work->work); + + return NOTIFY_DONE; } void nfp_tunnel_request_route_v4(struct nfp_app *app, struct sk_buff *skb) @@ -706,6 +762,7 @@ void nfp_tunnel_request_route_v4(struct nfp_app *app, struct sk_buff *skb) netdev = nfp_app_dev_get(app, be32_to_cpu(payload->ingress_port), NULL); if (!netdev) goto fail_rcu_unlock; + dev_hold(netdev); flow.daddr = payload->ipv4_addr; flow.flowi4_proto = IPPROTO_UDP; @@ -725,13 +782,16 @@ void nfp_tunnel_request_route_v4(struct nfp_app *app, struct sk_buff *skb) ip_rt_put(rt); if (!n) goto fail_rcu_unlock; + rcu_read_unlock(); + nfp_tun_write_neigh(n->dev, app, &flow, n, false, true); neigh_release(n); - rcu_read_unlock(); + dev_put(netdev); return; fail_rcu_unlock: rcu_read_unlock(); + dev_put(netdev); nfp_flower_cmsg_warn(app, "Requested route not found.\n"); } @@ -749,6 +809,7 @@ void nfp_tunnel_request_route_v6(struct nfp_app *app, struct sk_buff *skb) netdev = nfp_app_dev_get(app, be32_to_cpu(payload->ingress_port), NULL); if (!netdev) goto fail_rcu_unlock; + dev_hold(netdev); flow.daddr = payload->ipv6_addr; flow.flowi6_proto = IPPROTO_UDP; @@ -766,14 +827,16 @@ void nfp_tunnel_request_route_v6(struct nfp_app *app, struct sk_buff *skb) dst_release(dst); if (!n) goto fail_rcu_unlock; + rcu_read_unlock(); nfp_tun_write_neigh(n->dev, app, &flow, n, true, true); neigh_release(n); - rcu_read_unlock(); + dev_put(netdev); return; fail_rcu_unlock: rcu_read_unlock(); + dev_put(netdev); nfp_flower_cmsg_warn(app, "Requested IPv6 route not found.\n"); } -- cgit v1.2.3 From 5a6c9a05e55cb2972396cc991af9d74c8c15029a Mon Sep 17 00:00:00 2001 From: Lingkai Dong Date: Wed, 6 Dec 2023 13:51:58 +0000 Subject: drm: Fix FD ownership check in drm_master_check_perm() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The DRM subsystem keeps a record of the owner of a DRM device file descriptor using thread group ID (TGID) instead of process ID (PID), to ensures all threads within the same userspace process are considered the owner. However, the DRM master ownership check compares the current thread's PID against the record, so the thread is incorrectly considered to be not the FD owner if the PID is not equal to the TGID. This causes DRM ioctls to be denied master privileges, even if the same thread that opened the FD performs an ioctl. Fix this by checking TGID. Fixes: 4230cea89cafb ("drm: Track clients by tgid and not tid") Signed-off-by: Lingkai Dong Reviewed-by: Christian König Reviewed-by: Tvrtko Ursulin Cc: # v6.4+ Link: https://patchwork.freedesktop.org/patch/msgid/PA6PR08MB107665920BE9A96658CDA04CE8884A@PA6PR08MB10766.eurprd08.prod.outlook.com Signed-off-by: Christian König --- drivers/gpu/drm/drm_auth.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/drm_auth.c b/drivers/gpu/drm/drm_auth.c index 2ed2585ded37..6899b3dc1f12 100644 --- a/drivers/gpu/drm/drm_auth.c +++ b/drivers/gpu/drm/drm_auth.c @@ -236,7 +236,7 @@ static int drm_master_check_perm(struct drm_device *dev, struct drm_file *file_priv) { if (file_priv->was_master && - rcu_access_pointer(file_priv->pid) == task_pid(current)) + rcu_access_pointer(file_priv->pid) == task_tgid(current)) return 0; if (!capable(CAP_SYS_ADMIN)) -- cgit v1.2.3 From 107b4e063d78c300b21e2d5291b1aa94c514ea5b Mon Sep 17 00:00:00 2001 From: Georg Gottleuber Date: Wed, 20 Sep 2023 10:52:10 +0200 Subject: nvme-pci: Add sleep quirk for Kingston drives Some Kingston NV1 and A2000 are wasting a lot of power on specific TUXEDO platforms in s2idle sleep if 'Simple Suspend' is used. This patch applies a new quirk 'Force No Simple Suspend' to achieve a low power sleep without 'Simple Suspend'. Signed-off-by: Werner Sembach Signed-off-by: Georg Gottleuber Cc: Reviewed-by: Christoph Hellwig Signed-off-by: Keith Busch --- drivers/nvme/host/nvme.h | 5 +++++ drivers/nvme/host/pci.c | 16 +++++++++++++++- 2 files changed, 20 insertions(+), 1 deletion(-) diff --git a/drivers/nvme/host/nvme.h b/drivers/nvme/host/nvme.h index efb20a8e23a3..e7411dac00f7 100644 --- a/drivers/nvme/host/nvme.h +++ b/drivers/nvme/host/nvme.h @@ -156,6 +156,11 @@ enum nvme_quirks { * No temperature thresholds for channels other than 0 (Composite). */ NVME_QUIRK_NO_SECONDARY_TEMP_THRESH = (1 << 19), + + /* + * Disables simple suspend/resume path. + */ + NVME_QUIRK_FORCE_NO_SIMPLE_SUSPEND = (1 << 20), }; /* diff --git a/drivers/nvme/host/pci.c b/drivers/nvme/host/pci.c index fad4cccce745..61af7ff1a9d6 100644 --- a/drivers/nvme/host/pci.c +++ b/drivers/nvme/host/pci.c @@ -2902,6 +2902,18 @@ static unsigned long check_vendor_combination_bug(struct pci_dev *pdev) if ((dmi_match(DMI_BOARD_VENDOR, "LENOVO")) && dmi_match(DMI_BOARD_NAME, "LNVNB161216")) return NVME_QUIRK_SIMPLE_SUSPEND; + } else if (pdev->vendor == 0x2646 && (pdev->device == 0x2263 || + pdev->device == 0x500f)) { + /* + * Exclude some Kingston NV1 and A2000 devices from + * NVME_QUIRK_SIMPLE_SUSPEND. Do a full suspend to save a + * lot fo energy with s2idle sleep on some TUXEDO platforms. + */ + if (dmi_match(DMI_BOARD_NAME, "NS5X_NS7XAU") || + dmi_match(DMI_BOARD_NAME, "NS5x_7xAU") || + dmi_match(DMI_BOARD_NAME, "NS5x_7xPU") || + dmi_match(DMI_BOARD_NAME, "PH4PRX1_PH6PRX1")) + return NVME_QUIRK_FORCE_NO_SIMPLE_SUSPEND; } return 0; @@ -2932,7 +2944,9 @@ static struct nvme_dev *nvme_pci_alloc_dev(struct pci_dev *pdev, dev->dev = get_device(&pdev->dev); quirks |= check_vendor_combination_bug(pdev); - if (!noacpi && acpi_storage_d3(&pdev->dev)) { + if (!noacpi && + !(quirks & NVME_QUIRK_FORCE_NO_SIMPLE_SUSPEND) && + acpi_storage_d3(&pdev->dev)) { /* * Some systems use a bios work around to ask for D3 on * platforms that support kernel managed suspend. -- cgit v1.2.3 From 705318a99a138c29a512a72c3e0043b3cd7f55f4 Mon Sep 17 00:00:00 2001 From: Pavel Begunkov Date: Wed, 6 Dec 2023 13:26:47 +0000 Subject: io_uring/af_unix: disable sending io_uring over sockets File reference cycles have caused lots of problems for io_uring in the past, and it still doesn't work exactly right and races with unix_stream_read_generic(). The safest fix would be to completely disallow sending io_uring files via sockets via SCM_RIGHT, so there are no possible cycles invloving registered files and thus rendering SCM accounting on the io_uring side unnecessary. Cc: Fixes: 0091bfc81741b ("io_uring/af_unix: defer registered files gc to io_uring release") Reported-and-suggested-by: Jann Horn Signed-off-by: Pavel Begunkov Link: https://lore.kernel.org/r/c716c88321939156909cfa1bd8b0faaf1c804103.1701868795.git.asml.silence@gmail.com Signed-off-by: Jens Axboe --- io_uring/rsrc.h | 7 ------- net/core/scm.c | 6 ++++++ 2 files changed, 6 insertions(+), 7 deletions(-) diff --git a/io_uring/rsrc.h b/io_uring/rsrc.h index 8625181fb87a..08ac0d8e07ef 100644 --- a/io_uring/rsrc.h +++ b/io_uring/rsrc.h @@ -77,17 +77,10 @@ int io_sqe_files_register(struct io_ring_ctx *ctx, void __user *arg, int __io_scm_file_account(struct io_ring_ctx *ctx, struct file *file); -#if defined(CONFIG_UNIX) -static inline bool io_file_need_scm(struct file *filp) -{ - return !!unix_get_socket(filp); -} -#else static inline bool io_file_need_scm(struct file *filp) { return false; } -#endif static inline int io_scm_file_account(struct io_ring_ctx *ctx, struct file *file) diff --git a/net/core/scm.c b/net/core/scm.c index 880027ecf516..7dc47c17d863 100644 --- a/net/core/scm.c +++ b/net/core/scm.c @@ -26,6 +26,7 @@ #include #include #include +#include #include @@ -103,6 +104,11 @@ static int scm_fp_copy(struct cmsghdr *cmsg, struct scm_fp_list **fplp) if (fd < 0 || !(file = fget_raw(fd))) return -EBADF; + /* don't allow io_uring files */ + if (io_uring_get_socket(file)) { + fput(file); + return -EINVAL; + } *fpp++ = file; fpl->count++; } -- cgit v1.2.3 From b82a8dbd3d2f4563156f7150c6f2ecab6e960b30 Mon Sep 17 00:00:00 2001 From: "Kirill A. Shutemov" Date: Mon, 4 Dec 2023 11:31:38 +0300 Subject: x86/coco: Disable 32-bit emulation by default on TDX and SEV MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The INT 0x80 instruction is used for 32-bit x86 Linux syscalls. The kernel expects to receive a software interrupt as a result of the INT 0x80 instruction. However, an external interrupt on the same vector triggers the same handler. The kernel interprets an external interrupt on vector 0x80 as a 32-bit system call that came from userspace. A VMM can inject external interrupts on any arbitrary vector at any time. This remains true even for TDX and SEV guests where the VMM is untrusted. Put together, this allows an untrusted VMM to trigger int80 syscall handling at any given point. The content of the guest register file at that moment defines what syscall is triggered and its arguments. It opens the guest OS to manipulation from the VMM side. Disable 32-bit emulation by default for TDX and SEV. User can override it with the ia32_emulation=y command line option. [ dhansen: reword the changelog ] Reported-by: Supraja Sridhara Reported-by: Benedict Schlüter Reported-by: Mark Kuhne Reported-by: Andrin Bertschi Reported-by: Shweta Shinde Signed-off-by: Kirill A. Shutemov Signed-off-by: Dave Hansen Reviewed-by: Thomas Gleixner Reviewed-by: Borislav Petkov (AMD) Cc: # v6.0+: 1da5c9b x86: Introduce ia32_enabled() Cc: # v6.0+ --- arch/x86/coco/tdx/tdx.c | 10 ++++++++++ arch/x86/include/asm/ia32.h | 7 +++++++ arch/x86/mm/mem_encrypt_amd.c | 11 +++++++++++ 3 files changed, 28 insertions(+) diff --git a/arch/x86/coco/tdx/tdx.c b/arch/x86/coco/tdx/tdx.c index 1b5d17a9f70d..545e54b829b2 100644 --- a/arch/x86/coco/tdx/tdx.c +++ b/arch/x86/coco/tdx/tdx.c @@ -10,6 +10,7 @@ #include #include #include +#include #include #include #include @@ -891,5 +892,14 @@ void __init tdx_early_init(void) */ x86_cpuinit.parallel_bringup = false; + /* + * The VMM is capable of injecting interrupt 0x80 and triggering the + * compatibility syscall path. + * + * By default, the 32-bit emulation is disabled in order to ensure + * the safety of the VM. + */ + ia32_disable(); + pr_info("Guest detected\n"); } diff --git a/arch/x86/include/asm/ia32.h b/arch/x86/include/asm/ia32.h index 5a2ae24b1204..9805629479d9 100644 --- a/arch/x86/include/asm/ia32.h +++ b/arch/x86/include/asm/ia32.h @@ -75,6 +75,11 @@ static inline bool ia32_enabled(void) return __ia32_enabled; } +static inline void ia32_disable(void) +{ + __ia32_enabled = false; +} + #else /* !CONFIG_IA32_EMULATION */ static inline bool ia32_enabled(void) @@ -82,6 +87,8 @@ static inline bool ia32_enabled(void) return IS_ENABLED(CONFIG_X86_32); } +static inline void ia32_disable(void) {} + #endif #endif /* _ASM_X86_IA32_H */ diff --git a/arch/x86/mm/mem_encrypt_amd.c b/arch/x86/mm/mem_encrypt_amd.c index a68f2dda0948..70b91de2e053 100644 --- a/arch/x86/mm/mem_encrypt_amd.c +++ b/arch/x86/mm/mem_encrypt_amd.c @@ -32,6 +32,7 @@ #include #include #include +#include #include "mm_internal.h" @@ -481,6 +482,16 @@ void __init sme_early_init(void) */ if (sev_status & MSR_AMD64_SEV_ES_ENABLED) x86_cpuinit.parallel_bringup = false; + + /* + * The VMM is capable of injecting interrupt 0x80 and triggering the + * compatibility syscall path. + * + * By default, the 32-bit emulation is disabled in order to ensure + * the safety of the VM. + */ + if (sev_status & MSR_AMD64_SEV_ENABLED) + ia32_disable(); } void __init mem_encrypt_free_decrypted_mem(void) -- cgit v1.2.3 From be5341eb0d43b1e754799498bd2e8756cc167a41 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Mon, 4 Dec 2023 11:31:39 +0300 Subject: x86/entry: Convert INT 0x80 emulation to IDTENTRY There is no real reason to have a separate ASM entry point implementation for the legacy INT 0x80 syscall emulation on 64-bit. IDTENTRY provides all the functionality needed with the only difference that it does not: - save the syscall number (AX) into pt_regs::orig_ax - set pt_regs::ax to -ENOSYS Both can be done safely in the C code of an IDTENTRY before invoking any of the syscall related functions which depend on this convention. Aside of ASM code reduction this prepares for detecting and handling a local APIC injected vector 0x80. [ kirill.shutemov: More verbose comments ] Suggested-by: Linus Torvalds Signed-off-by: Thomas Gleixner Signed-off-by: Kirill A. Shutemov Signed-off-by: Dave Hansen Reviewed-by: Borislav Petkov (AMD) Cc: # v6.0+ --- arch/x86/entry/common.c | 58 +++++++++++++++++++++++++++++- arch/x86/entry/entry_64_compat.S | 77 ---------------------------------------- arch/x86/include/asm/idtentry.h | 4 +++ arch/x86/include/asm/proto.h | 4 --- arch/x86/kernel/idt.c | 2 +- arch/x86/xen/enlighten_pv.c | 2 +- arch/x86/xen/xen-asm.S | 2 +- 7 files changed, 64 insertions(+), 85 deletions(-) diff --git a/arch/x86/entry/common.c b/arch/x86/entry/common.c index d813160b14d8..8ca4d57d68eb 100644 --- a/arch/x86/entry/common.c +++ b/arch/x86/entry/common.c @@ -167,7 +167,62 @@ static __always_inline void do_syscall_32_irqs_on(struct pt_regs *regs, int nr) } } -/* Handles int $0x80 */ +#ifdef CONFIG_IA32_EMULATION +/** + * int80_emulation - 32-bit legacy syscall entry + * + * This entry point can be used by 32-bit and 64-bit programs to perform + * 32-bit system calls. Instances of INT $0x80 can be found inline in + * various programs and libraries. It is also used by the vDSO's + * __kernel_vsyscall fallback for hardware that doesn't support a faster + * entry method. Restarted 32-bit system calls also fall back to INT + * $0x80 regardless of what instruction was originally used to do the + * system call. + * + * This is considered a slow path. It is not used by most libc + * implementations on modern hardware except during process startup. + * + * The arguments for the INT $0x80 based syscall are on stack in the + * pt_regs structure: + * eax: system call number + * ebx, ecx, edx, esi, edi, ebp: arg1 - arg 6 + */ +DEFINE_IDTENTRY_RAW(int80_emulation) +{ + int nr; + + /* Establish kernel context. */ + enter_from_user_mode(regs); + + instrumentation_begin(); + add_random_kstack_offset(); + + /* + * The low level idtentry code pushed -1 into regs::orig_ax + * and regs::ax contains the syscall number. + * + * User tracing code (ptrace or signal handlers) might assume + * that the regs::orig_ax contains a 32-bit number on invoking + * a 32-bit syscall. + * + * Establish the syscall convention by saving the 32bit truncated + * syscall number in regs::orig_ax and by invalidating regs::ax. + */ + regs->orig_ax = regs->ax & GENMASK(31, 0); + regs->ax = -ENOSYS; + + nr = syscall_32_enter(regs); + + local_irq_enable(); + nr = syscall_enter_from_user_mode_work(regs, nr); + do_syscall_32_irqs_on(regs, nr); + + instrumentation_end(); + syscall_exit_to_user_mode(regs); +} +#else /* CONFIG_IA32_EMULATION */ + +/* Handles int $0x80 on a 32bit kernel */ __visible noinstr void do_int80_syscall_32(struct pt_regs *regs) { int nr = syscall_32_enter(regs); @@ -186,6 +241,7 @@ __visible noinstr void do_int80_syscall_32(struct pt_regs *regs) instrumentation_end(); syscall_exit_to_user_mode(regs); } +#endif /* !CONFIG_IA32_EMULATION */ static noinstr bool __do_fast_syscall_32(struct pt_regs *regs) { diff --git a/arch/x86/entry/entry_64_compat.S b/arch/x86/entry/entry_64_compat.S index 27c05d08558a..de94e2e84ecc 100644 --- a/arch/x86/entry/entry_64_compat.S +++ b/arch/x86/entry/entry_64_compat.S @@ -275,80 +275,3 @@ SYM_INNER_LABEL(entry_SYSRETL_compat_end, SYM_L_GLOBAL) ANNOTATE_NOENDBR int3 SYM_CODE_END(entry_SYSCALL_compat) - -/* - * 32-bit legacy system call entry. - * - * 32-bit x86 Linux system calls traditionally used the INT $0x80 - * instruction. INT $0x80 lands here. - * - * This entry point can be used by 32-bit and 64-bit programs to perform - * 32-bit system calls. Instances of INT $0x80 can be found inline in - * various programs and libraries. It is also used by the vDSO's - * __kernel_vsyscall fallback for hardware that doesn't support a faster - * entry method. Restarted 32-bit system calls also fall back to INT - * $0x80 regardless of what instruction was originally used to do the - * system call. - * - * This is considered a slow path. It is not used by most libc - * implementations on modern hardware except during process startup. - * - * Arguments: - * eax system call number - * ebx arg1 - * ecx arg2 - * edx arg3 - * esi arg4 - * edi arg5 - * ebp arg6 - */ -SYM_CODE_START(entry_INT80_compat) - UNWIND_HINT_ENTRY - ENDBR - /* - * Interrupts are off on entry. - */ - ASM_CLAC /* Do this early to minimize exposure */ - ALTERNATIVE "swapgs", "", X86_FEATURE_XENPV - - /* - * User tracing code (ptrace or signal handlers) might assume that - * the saved RAX contains a 32-bit number when we're invoking a 32-bit - * syscall. Just in case the high bits are nonzero, zero-extend - * the syscall number. (This could almost certainly be deleted - * with no ill effects.) - */ - movl %eax, %eax - - /* switch to thread stack expects orig_ax and rdi to be pushed */ - pushq %rax /* pt_regs->orig_ax */ - - /* Need to switch before accessing the thread stack. */ - SWITCH_TO_KERNEL_CR3 scratch_reg=%rax - - /* In the Xen PV case we already run on the thread stack. */ - ALTERNATIVE "", "jmp .Lint80_keep_stack", X86_FEATURE_XENPV - - movq %rsp, %rax - movq PER_CPU_VAR(pcpu_hot + X86_top_of_stack), %rsp - - pushq 5*8(%rax) /* regs->ss */ - pushq 4*8(%rax) /* regs->rsp */ - pushq 3*8(%rax) /* regs->eflags */ - pushq 2*8(%rax) /* regs->cs */ - pushq 1*8(%rax) /* regs->ip */ - pushq 0*8(%rax) /* regs->orig_ax */ -.Lint80_keep_stack: - - PUSH_AND_CLEAR_REGS rax=$-ENOSYS - UNWIND_HINT_REGS - - cld - - IBRS_ENTER - UNTRAIN_RET - - movq %rsp, %rdi - call do_int80_syscall_32 - jmp swapgs_restore_regs_and_return_to_usermode -SYM_CODE_END(entry_INT80_compat) diff --git a/arch/x86/include/asm/idtentry.h b/arch/x86/include/asm/idtentry.h index 05fd175cec7d..13639e57e1f8 100644 --- a/arch/x86/include/asm/idtentry.h +++ b/arch/x86/include/asm/idtentry.h @@ -569,6 +569,10 @@ DECLARE_IDTENTRY_RAW(X86_TRAP_UD, exc_invalid_op); DECLARE_IDTENTRY_RAW(X86_TRAP_BP, exc_int3); DECLARE_IDTENTRY_RAW_ERRORCODE(X86_TRAP_PF, exc_page_fault); +#if defined(CONFIG_IA32_EMULATION) +DECLARE_IDTENTRY_RAW(IA32_SYSCALL_VECTOR, int80_emulation); +#endif + #ifdef CONFIG_X86_MCE #ifdef CONFIG_X86_64 DECLARE_IDTENTRY_MCE(X86_TRAP_MC, exc_machine_check); diff --git a/arch/x86/include/asm/proto.h b/arch/x86/include/asm/proto.h index 4d84122bd643..484f4f0131a5 100644 --- a/arch/x86/include/asm/proto.h +++ b/arch/x86/include/asm/proto.h @@ -32,10 +32,6 @@ void entry_SYSCALL_compat(void); void entry_SYSCALL_compat_safe_stack(void); void entry_SYSRETL_compat_unsafe_stack(void); void entry_SYSRETL_compat_end(void); -void entry_INT80_compat(void); -#ifdef CONFIG_XEN_PV -void xen_entry_INT80_compat(void); -#endif #else /* !CONFIG_IA32_EMULATION */ #define entry_SYSCALL_compat NULL #define entry_SYSENTER_compat NULL diff --git a/arch/x86/kernel/idt.c b/arch/x86/kernel/idt.c index 8857abc706e4..660b601f1d6c 100644 --- a/arch/x86/kernel/idt.c +++ b/arch/x86/kernel/idt.c @@ -121,7 +121,7 @@ static const __initconst struct idt_data def_idts[] = { static const struct idt_data ia32_idt[] __initconst = { #if defined(CONFIG_IA32_EMULATION) - SYSG(IA32_SYSCALL_VECTOR, entry_INT80_compat), + SYSG(IA32_SYSCALL_VECTOR, asm_int80_emulation), #elif defined(CONFIG_X86_32) SYSG(IA32_SYSCALL_VECTOR, entry_INT80_32), #endif diff --git a/arch/x86/xen/enlighten_pv.c b/arch/x86/xen/enlighten_pv.c index bbbfdd495ebd..aeb33e0a3f76 100644 --- a/arch/x86/xen/enlighten_pv.c +++ b/arch/x86/xen/enlighten_pv.c @@ -704,7 +704,7 @@ static struct trap_array_entry trap_array[] = { TRAP_ENTRY(exc_int3, false ), TRAP_ENTRY(exc_overflow, false ), #ifdef CONFIG_IA32_EMULATION - { entry_INT80_compat, xen_entry_INT80_compat, false }, + TRAP_ENTRY(int80_emulation, false ), #endif TRAP_ENTRY(exc_page_fault, false ), TRAP_ENTRY(exc_divide_error, false ), diff --git a/arch/x86/xen/xen-asm.S b/arch/x86/xen/xen-asm.S index 9e5e68008785..1a9cd18dfbd3 100644 --- a/arch/x86/xen/xen-asm.S +++ b/arch/x86/xen/xen-asm.S @@ -156,7 +156,7 @@ xen_pv_trap asm_xenpv_exc_machine_check #endif /* CONFIG_X86_MCE */ xen_pv_trap asm_exc_simd_coprocessor_error #ifdef CONFIG_IA32_EMULATION -xen_pv_trap entry_INT80_compat +xen_pv_trap asm_int80_emulation #endif xen_pv_trap asm_exc_xen_unknown_trap xen_pv_trap asm_exc_xen_hypervisor_callback -- cgit v1.2.3 From 55617fb991df535f953589586468612351575704 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Mon, 4 Dec 2023 11:31:40 +0300 Subject: x86/entry: Do not allow external 0x80 interrupts The INT 0x80 instruction is used for 32-bit x86 Linux syscalls. The kernel expects to receive a software interrupt as a result of the INT 0x80 instruction. However, an external interrupt on the same vector also triggers the same codepath. An external interrupt on vector 0x80 will currently be interpreted as a 32-bit system call, and assuming that it was a user context. Panic on external interrupts on the vector. To distinguish software interrupts from external ones, the kernel checks the APIC ISR bit relevant to the 0x80 vector. For software interrupts, this bit will be 0. Signed-off-by: Thomas Gleixner Signed-off-by: Kirill A. Shutemov Signed-off-by: Dave Hansen Reviewed-by: Borislav Petkov (AMD) Cc: # v6.0+ --- arch/x86/entry/common.c | 37 ++++++++++++++++++++++++++++++++++++- 1 file changed, 36 insertions(+), 1 deletion(-) diff --git a/arch/x86/entry/common.c b/arch/x86/entry/common.c index 8ca4d57d68eb..6356060caaf3 100644 --- a/arch/x86/entry/common.c +++ b/arch/x86/entry/common.c @@ -26,6 +26,7 @@ #include #endif +#include #include #include #include @@ -168,6 +169,25 @@ static __always_inline void do_syscall_32_irqs_on(struct pt_regs *regs, int nr) } #ifdef CONFIG_IA32_EMULATION +static __always_inline bool int80_is_external(void) +{ + const unsigned int offs = (0x80 / 32) * 0x10; + const u32 bit = BIT(0x80 % 32); + + /* The local APIC on XENPV guests is fake */ + if (cpu_feature_enabled(X86_FEATURE_XENPV)) + return false; + + /* + * If vector 0x80 is set in the APIC ISR then this is an external + * interrupt. Either from broken hardware or injected by a VMM. + * + * Note: In guest mode this is only valid for secure guests where + * the secure module fully controls the vAPIC exposed to the guest. + */ + return apic_read(APIC_ISR + offs) & bit; +} + /** * int80_emulation - 32-bit legacy syscall entry * @@ -191,12 +211,27 @@ DEFINE_IDTENTRY_RAW(int80_emulation) { int nr; - /* Establish kernel context. */ + /* Kernel does not use INT $0x80! */ + if (unlikely(!user_mode(regs))) { + irqentry_enter(regs); + instrumentation_begin(); + panic("Unexpected external interrupt 0x80\n"); + } + + /* + * Establish kernel context for instrumentation, including for + * int80_is_external() below which calls into the APIC driver. + * Identical for soft and external interrupts. + */ enter_from_user_mode(regs); instrumentation_begin(); add_random_kstack_offset(); + /* Validate that this is a soft interrupt to the extent possible */ + if (unlikely(int80_is_external())) + panic("Unexpected external interrupt 0x80\n"); + /* * The low level idtentry code pushed -1 into regs::orig_ax * and regs::ax contains the syscall number. -- cgit v1.2.3 From f4116bfc44621882556bbf70f5284fbf429a5cf6 Mon Sep 17 00:00:00 2001 From: "Kirill A. Shutemov" Date: Mon, 4 Dec 2023 11:31:41 +0300 Subject: x86/tdx: Allow 32-bit emulation by default 32-bit emulation was disabled on TDX to prevent a possible attack by a VMM injecting an interrupt on vector 0x80. Now that int80_emulation() has a check for external interrupts the limitation can be lifted. To distinguish software interrupts from external ones, int80_emulation() checks the APIC ISR bit relevant to the 0x80 vector. For software interrupts, this bit will be 0. On TDX, the VAPIC state (including ISR) is protected and cannot be manipulated by the VMM. The ISR bit is set by the microcode flow during the handling of posted interrupts. [ dhansen: more changelog tweaks ] Signed-off-by: Kirill A. Shutemov Signed-off-by: Dave Hansen Reviewed-by: Thomas Gleixner Reviewed-by: Borislav Petkov (AMD) Cc: # v6.0+ --- arch/x86/coco/tdx/tdx.c | 9 --------- 1 file changed, 9 deletions(-) diff --git a/arch/x86/coco/tdx/tdx.c b/arch/x86/coco/tdx/tdx.c index 545e54b829b2..cf1f13c82175 100644 --- a/arch/x86/coco/tdx/tdx.c +++ b/arch/x86/coco/tdx/tdx.c @@ -892,14 +892,5 @@ void __init tdx_early_init(void) */ x86_cpuinit.parallel_bringup = false; - /* - * The VMM is capable of injecting interrupt 0x80 and triggering the - * compatibility syscall path. - * - * By default, the 32-bit emulation is disabled in order to ensure - * the safety of the VM. - */ - ia32_disable(); - pr_info("Guest detected\n"); } -- cgit v1.2.3 From c5a595000e2677e865a39f249c056bc05d6e55fd Mon Sep 17 00:00:00 2001 From: John Fastabend Date: Wed, 6 Dec 2023 15:27:05 -0800 Subject: net: tls, update curr on splice as well The curr pointer must also be updated on the splice similar to how we do this for other copy types. Fixes: d829e9c4112b ("tls: convert to generic sk_msg interface") Signed-off-by: John Fastabend Reported-by: Jann Horn Link: https://lore.kernel.org/r/20231206232706.374377-2-john.fastabend@gmail.com Signed-off-by: Jakub Kicinski --- net/tls/tls_sw.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/net/tls/tls_sw.c b/net/tls/tls_sw.c index 316f76187962..e37b4d2e2acd 100644 --- a/net/tls/tls_sw.c +++ b/net/tls/tls_sw.c @@ -952,6 +952,8 @@ static int tls_sw_sendmsg_splice(struct sock *sk, struct msghdr *msg, } sk_msg_page_add(msg_pl, page, part, off); + msg_pl->sg.copybreak = 0; + msg_pl->sg.curr = msg_pl->sg.end; sk_mem_charge(sk, part); *copied += part; try_to_copy -= part; -- cgit v1.2.3 From bb9aefde5bbaf6c168c77ba635c155b4980c2287 Mon Sep 17 00:00:00 2001 From: John Fastabend Date: Wed, 6 Dec 2023 15:27:06 -0800 Subject: bpf: sockmap, updating the sg structure should also update curr Curr pointer should be updated when the sg structure is shifted. Fixes: 7246d8ed4dcce ("bpf: helper to pop data from messages") Signed-off-by: John Fastabend Link: https://lore.kernel.org/r/20231206232706.374377-3-john.fastabend@gmail.com Signed-off-by: Jakub Kicinski --- net/core/filter.c | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) diff --git a/net/core/filter.c b/net/core/filter.c index 7e4d7c3bcc84..1737884be52f 100644 --- a/net/core/filter.c +++ b/net/core/filter.c @@ -2602,6 +2602,22 @@ BPF_CALL_2(bpf_msg_cork_bytes, struct sk_msg *, msg, u32, bytes) return 0; } +static void sk_msg_reset_curr(struct sk_msg *msg) +{ + u32 i = msg->sg.start; + u32 len = 0; + + do { + len += sk_msg_elem(msg, i)->length; + sk_msg_iter_var_next(i); + if (len >= msg->sg.size) + break; + } while (i != msg->sg.end); + + msg->sg.curr = i; + msg->sg.copybreak = 0; +} + static const struct bpf_func_proto bpf_msg_cork_bytes_proto = { .func = bpf_msg_cork_bytes, .gpl_only = false, @@ -2721,6 +2737,7 @@ BPF_CALL_4(bpf_msg_pull_data, struct sk_msg *, msg, u32, start, msg->sg.end - shift + NR_MSG_FRAG_IDS : msg->sg.end - shift; out: + sk_msg_reset_curr(msg); msg->data = sg_virt(&msg->sg.data[first_sge]) + start - offset; msg->data_end = msg->data + bytes; return 0; @@ -2857,6 +2874,7 @@ BPF_CALL_4(bpf_msg_push_data, struct sk_msg *, msg, u32, start, msg->sg.data[new] = rsge; } + sk_msg_reset_curr(msg); sk_msg_compute_data_pointers(msg); return 0; } @@ -3025,6 +3043,7 @@ BPF_CALL_4(bpf_msg_pop_data, struct sk_msg *, msg, u32, start, sk_mem_uncharge(msg->sk, len - pop); msg->sg.size -= (len - pop); + sk_msg_reset_curr(msg); sk_msg_compute_data_pointers(msg); return 0; } -- cgit v1.2.3 From 44ec98ea5ea9cfecd31a5c4cc124703cb5442832 Mon Sep 17 00:00:00 2001 From: Ido Schimmel Date: Wed, 6 Dec 2023 23:31:01 +0200 Subject: psample: Require 'CAP_NET_ADMIN' when joining "packets" group The "psample" generic netlink family notifies sampled packets over the "packets" multicast group. This is problematic since by default generic netlink allows non-root users to listen to these notifications. Fix by marking the group with the 'GENL_UNS_ADMIN_PERM' flag. This will prevent non-root users or root without the 'CAP_NET_ADMIN' capability (in the user namespace owning the network namespace) from joining the group. Tested using [1]. Before: # capsh -- -c ./psample_repo # capsh --drop=cap_net_admin -- -c ./psample_repo After: # capsh -- -c ./psample_repo # capsh --drop=cap_net_admin -- -c ./psample_repo Failed to join "packets" multicast group [1] $ cat psample.c #include #include #include #include int join_grp(struct nl_sock *sk, const char *grp_name) { int grp, err; grp = genl_ctrl_resolve_grp(sk, "psample", grp_name); if (grp < 0) { fprintf(stderr, "Failed to resolve \"%s\" multicast group\n", grp_name); return grp; } err = nl_socket_add_memberships(sk, grp, NFNLGRP_NONE); if (err) { fprintf(stderr, "Failed to join \"%s\" multicast group\n", grp_name); return err; } return 0; } int main(int argc, char **argv) { struct nl_sock *sk; int err; sk = nl_socket_alloc(); if (!sk) { fprintf(stderr, "Failed to allocate socket\n"); return -1; } err = genl_connect(sk); if (err) { fprintf(stderr, "Failed to connect socket\n"); return err; } err = join_grp(sk, "config"); if (err) return err; err = join_grp(sk, "packets"); if (err) return err; return 0; } $ gcc -I/usr/include/libnl3 -lnl-3 -lnl-genl-3 -o psample_repo psample.c Fixes: 6ae0a6286171 ("net: Introduce psample, a new genetlink channel for packet sampling") Reported-by: "The UK's National Cyber Security Centre (NCSC)" Signed-off-by: Ido Schimmel Reviewed-by: Jacob Keller Reviewed-by: Jiri Pirko Link: https://lore.kernel.org/r/20231206213102.1824398-2-idosch@nvidia.com Signed-off-by: Jakub Kicinski --- net/psample/psample.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/net/psample/psample.c b/net/psample/psample.c index 81a794e36f53..c34e902855db 100644 --- a/net/psample/psample.c +++ b/net/psample/psample.c @@ -31,7 +31,8 @@ enum psample_nl_multicast_groups { static const struct genl_multicast_group psample_nl_mcgrps[] = { [PSAMPLE_NL_MCGRP_CONFIG] = { .name = PSAMPLE_NL_MCGRP_CONFIG_NAME }, - [PSAMPLE_NL_MCGRP_SAMPLE] = { .name = PSAMPLE_NL_MCGRP_SAMPLE_NAME }, + [PSAMPLE_NL_MCGRP_SAMPLE] = { .name = PSAMPLE_NL_MCGRP_SAMPLE_NAME, + .flags = GENL_UNS_ADMIN_PERM }, }; static struct genl_family psample_nl_family __ro_after_init; -- cgit v1.2.3 From e03781879a0d524ce3126678d50a80484a513c4b Mon Sep 17 00:00:00 2001 From: Ido Schimmel Date: Wed, 6 Dec 2023 23:31:02 +0200 Subject: drop_monitor: Require 'CAP_SYS_ADMIN' when joining "events" group The "NET_DM" generic netlink family notifies drop locations over the "events" multicast group. This is problematic since by default generic netlink allows non-root users to listen to these notifications. Fix by adding a new field to the generic netlink multicast group structure that when set prevents non-root users or root without the 'CAP_SYS_ADMIN' capability (in the user namespace owning the network namespace) from joining the group. Set this field for the "events" group. Use 'CAP_SYS_ADMIN' rather than 'CAP_NET_ADMIN' because of the nature of the information that is shared over this group. Note that the capability check in this case will always be performed against the initial user namespace since the family is not netns aware and only operates in the initial network namespace. A new field is added to the structure rather than using the "flags" field because the existing field uses uAPI flags and it is inappropriate to add a new uAPI flag for an internal kernel check. In net-next we can rework the "flags" field to use internal flags and fold the new field into it. But for now, in order to reduce the amount of changes, add a new field. Since the information can only be consumed by root, mark the control plane operations that start and stop the tracing as root-only using the 'GENL_ADMIN_PERM' flag. Tested using [1]. Before: # capsh -- -c ./dm_repo # capsh --drop=cap_sys_admin -- -c ./dm_repo After: # capsh -- -c ./dm_repo # capsh --drop=cap_sys_admin -- -c ./dm_repo Failed to join "events" multicast group [1] $ cat dm.c #include #include #include #include int main(int argc, char **argv) { struct nl_sock *sk; int grp, err; sk = nl_socket_alloc(); if (!sk) { fprintf(stderr, "Failed to allocate socket\n"); return -1; } err = genl_connect(sk); if (err) { fprintf(stderr, "Failed to connect socket\n"); return err; } grp = genl_ctrl_resolve_grp(sk, "NET_DM", "events"); if (grp < 0) { fprintf(stderr, "Failed to resolve \"events\" multicast group\n"); return grp; } err = nl_socket_add_memberships(sk, grp, NFNLGRP_NONE); if (err) { fprintf(stderr, "Failed to join \"events\" multicast group\n"); return err; } return 0; } $ gcc -I/usr/include/libnl3 -lnl-3 -lnl-genl-3 -o dm_repo dm.c Fixes: 9a8afc8d3962 ("Network Drop Monitor: Adding drop monitor implementation & Netlink protocol") Reported-by: "The UK's National Cyber Security Centre (NCSC)" Signed-off-by: Ido Schimmel Reviewed-by: Jacob Keller Reviewed-by: Jiri Pirko Link: https://lore.kernel.org/r/20231206213102.1824398-3-idosch@nvidia.com Signed-off-by: Jakub Kicinski --- include/net/genetlink.h | 2 ++ net/core/drop_monitor.c | 4 +++- net/netlink/genetlink.c | 3 +++ 3 files changed, 8 insertions(+), 1 deletion(-) diff --git a/include/net/genetlink.h b/include/net/genetlink.h index e18a4c0d69ee..c53244f20437 100644 --- a/include/net/genetlink.h +++ b/include/net/genetlink.h @@ -12,10 +12,12 @@ * struct genl_multicast_group - generic netlink multicast group * @name: name of the multicast group, names are per-family * @flags: GENL_* flags (%GENL_ADMIN_PERM or %GENL_UNS_ADMIN_PERM) + * @cap_sys_admin: whether %CAP_SYS_ADMIN is required for binding */ struct genl_multicast_group { char name[GENL_NAMSIZ]; u8 flags; + u8 cap_sys_admin:1; }; struct genl_split_ops; diff --git a/net/core/drop_monitor.c b/net/core/drop_monitor.c index aff31cd944c2..b240d9aae4a6 100644 --- a/net/core/drop_monitor.c +++ b/net/core/drop_monitor.c @@ -183,7 +183,7 @@ out: } static const struct genl_multicast_group dropmon_mcgrps[] = { - { .name = "events", }, + { .name = "events", .cap_sys_admin = 1 }, }; static void send_dm_alert(struct work_struct *work) @@ -1619,11 +1619,13 @@ static const struct genl_small_ops dropmon_ops[] = { .cmd = NET_DM_CMD_START, .validate = GENL_DONT_VALIDATE_STRICT | GENL_DONT_VALIDATE_DUMP, .doit = net_dm_cmd_trace, + .flags = GENL_ADMIN_PERM, }, { .cmd = NET_DM_CMD_STOP, .validate = GENL_DONT_VALIDATE_STRICT | GENL_DONT_VALIDATE_DUMP, .doit = net_dm_cmd_trace, + .flags = GENL_ADMIN_PERM, }, { .cmd = NET_DM_CMD_CONFIG_GET, diff --git a/net/netlink/genetlink.c b/net/netlink/genetlink.c index 92ef5ed2e7b0..9c7ffd10df2a 100644 --- a/net/netlink/genetlink.c +++ b/net/netlink/genetlink.c @@ -1691,6 +1691,9 @@ static int genl_bind(struct net *net, int group) if ((grp->flags & GENL_UNS_ADMIN_PERM) && !ns_capable(net->user_ns, CAP_NET_ADMIN)) ret = -EPERM; + if (grp->cap_sys_admin && + !ns_capable(net->user_ns, CAP_SYS_ADMIN)) + ret = -EPERM; break; } -- cgit v1.2.3 From 1499b89289bf272fd83cb296c82fb5519d0fe93f Mon Sep 17 00:00:00 2001 From: Sean Nyekjaer Date: Wed, 6 Dec 2023 08:16:54 +0100 Subject: net: dsa: microchip: provide a list of valid protocols for xmit handler Provide a list of valid protocols for which the driver will provide it's deferred xmit handler. When using DSA_TAG_PROTO_KSZ8795 protocol, it does not provide a "connect" method, therefor ksz_connect() is not allocating ksz_tagger_data. This avoids the following null pointer dereference: ksz_connect_tag_protocol from dsa_register_switch+0x9ac/0xee0 dsa_register_switch from ksz_switch_register+0x65c/0x828 ksz_switch_register from ksz_spi_probe+0x11c/0x168 ksz_spi_probe from spi_probe+0x84/0xa8 spi_probe from really_probe+0xc8/0x2d8 Fixes: ab32f56a4100 ("net: dsa: microchip: ptp: add packet transmission timestamping") Signed-off-by: Sean Nyekjaer Reviewed-by: Florian Fainelli Reviewed-by: Vladimir Oltean Link: https://lore.kernel.org/r/20231206071655.1626479-1-sean@geanix.com Signed-off-by: Jakub Kicinski --- drivers/net/dsa/microchip/ksz_common.c | 16 ++++++++++++---- 1 file changed, 12 insertions(+), 4 deletions(-) diff --git a/drivers/net/dsa/microchip/ksz_common.c b/drivers/net/dsa/microchip/ksz_common.c index 3fed406fb46a..ff4b39601c93 100644 --- a/drivers/net/dsa/microchip/ksz_common.c +++ b/drivers/net/dsa/microchip/ksz_common.c @@ -2713,10 +2713,18 @@ static int ksz_connect_tag_protocol(struct dsa_switch *ds, { struct ksz_tagger_data *tagger_data; - tagger_data = ksz_tagger_data(ds); - tagger_data->xmit_work_fn = ksz_port_deferred_xmit; - - return 0; + switch (proto) { + case DSA_TAG_PROTO_KSZ8795: + return 0; + case DSA_TAG_PROTO_KSZ9893: + case DSA_TAG_PROTO_KSZ9477: + case DSA_TAG_PROTO_LAN937X: + tagger_data = ksz_tagger_data(ds); + tagger_data->xmit_work_fn = ksz_port_deferred_xmit; + return 0; + default: + return -EPROTONOSUPPORT; + } } static int ksz_port_vlan_filtering(struct dsa_switch *ds, int port, -- cgit v1.2.3 From c5a10397d4571bcfd4bd7ca211ee47bcb6792ec3 Mon Sep 17 00:00:00 2001 From: Wen Gu Date: Thu, 7 Dec 2023 01:02:37 +0800 Subject: net/smc: fix missing byte order conversion in CLC handshake The byte order conversions of ISM GID and DMB token are missing in process of CLC accept and confirm. So fix it. Fixes: 3d9725a6a133 ("net/smc: common routine for CLC accept and confirm") Signed-off-by: Wen Gu Reviewed-by: Tony Lu Reviewed-by: Alexandra Winter Reviewed-by: Wenjia Zhang Link: https://lore.kernel.org/r/1701882157-87956-1-git-send-email-guwen@linux.alibaba.com Signed-off-by: Jakub Kicinski --- net/smc/af_smc.c | 4 ++-- net/smc/smc_clc.c | 9 ++++----- net/smc/smc_clc.h | 4 ++-- 3 files changed, 8 insertions(+), 9 deletions(-) diff --git a/net/smc/af_smc.c b/net/smc/af_smc.c index 2a1388841951..73eebddbbf41 100644 --- a/net/smc/af_smc.c +++ b/net/smc/af_smc.c @@ -723,7 +723,7 @@ static void smcd_conn_save_peer_info(struct smc_sock *smc, int bufsize = smc_uncompress_bufsize(clc->d0.dmbe_size); smc->conn.peer_rmbe_idx = clc->d0.dmbe_idx; - smc->conn.peer_token = clc->d0.token; + smc->conn.peer_token = ntohll(clc->d0.token); /* msg header takes up space in the buffer */ smc->conn.peer_rmbe_size = bufsize - sizeof(struct smcd_cdc_msg); atomic_set(&smc->conn.peer_rmbe_space, smc->conn.peer_rmbe_size); @@ -1415,7 +1415,7 @@ static int smc_connect_ism(struct smc_sock *smc, if (rc) return rc; } - ini->ism_peer_gid[ini->ism_selected] = aclc->d0.gid; + ini->ism_peer_gid[ini->ism_selected] = ntohll(aclc->d0.gid); /* there is only one lgr role for SMC-D; use server lock */ mutex_lock(&smc_server_lgr_pending); diff --git a/net/smc/smc_clc.c b/net/smc/smc_clc.c index 8deb46c28f1d..72f4d81a3f41 100644 --- a/net/smc/smc_clc.c +++ b/net/smc/smc_clc.c @@ -1004,6 +1004,7 @@ static int smc_clc_send_confirm_accept(struct smc_sock *smc, { struct smc_connection *conn = &smc->conn; struct smc_clc_first_contact_ext_v2x fce; + struct smcd_dev *smcd = conn->lgr->smcd; struct smc_clc_msg_accept_confirm *clc; struct smc_clc_fce_gid_ext gle; struct smc_clc_msg_trail trl; @@ -1021,17 +1022,15 @@ static int smc_clc_send_confirm_accept(struct smc_sock *smc, memcpy(clc->hdr.eyecatcher, SMCD_EYECATCHER, sizeof(SMCD_EYECATCHER)); clc->hdr.typev1 = SMC_TYPE_D; - clc->d0.gid = - conn->lgr->smcd->ops->get_local_gid(conn->lgr->smcd); - clc->d0.token = conn->rmb_desc->token; + clc->d0.gid = htonll(smcd->ops->get_local_gid(smcd)); + clc->d0.token = htonll(conn->rmb_desc->token); clc->d0.dmbe_size = conn->rmbe_size_comp; clc->d0.dmbe_idx = 0; memcpy(&clc->d0.linkid, conn->lgr->id, SMC_LGR_ID_SIZE); if (version == SMC_V1) { clc->hdr.length = htons(SMCD_CLC_ACCEPT_CONFIRM_LEN); } else { - clc_v2->d1.chid = - htons(smc_ism_get_chid(conn->lgr->smcd)); + clc_v2->d1.chid = htons(smc_ism_get_chid(smcd)); if (eid && eid[0]) memcpy(clc_v2->d1.eid, eid, SMC_MAX_EID_LEN); len = SMCD_CLC_ACCEPT_CONFIRM_LEN_V2; diff --git a/net/smc/smc_clc.h b/net/smc/smc_clc.h index c5c8e7db775a..08155a96a02a 100644 --- a/net/smc/smc_clc.h +++ b/net/smc/smc_clc.h @@ -204,8 +204,8 @@ struct smcr_clc_msg_accept_confirm { /* SMCR accept/confirm */ } __packed; struct smcd_clc_msg_accept_confirm_common { /* SMCD accept/confirm */ - u64 gid; /* Sender GID */ - u64 token; /* DMB token */ + __be64 gid; /* Sender GID */ + __be64 token; /* DMB token */ u8 dmbe_idx; /* DMBE index */ #if defined(__BIG_ENDIAN_BITFIELD) u8 dmbe_size : 4, /* buf size (compressed) */ -- cgit v1.2.3 From b0a930e8d90caf66a94fee7a9d0b8472bc3e7561 Mon Sep 17 00:00:00 2001 From: Stefano Garzarella Date: Wed, 6 Dec 2023 17:41:43 +0100 Subject: vsock/virtio: fix "comparison of distinct pointer types lacks a cast" warning MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit After backporting commit 581512a6dc93 ("vsock/virtio: MSG_ZEROCOPY flag support") in CentOS Stream 9, CI reported the following error: In file included from ./include/linux/kernel.h:17, from ./include/linux/list.h:9, from ./include/linux/preempt.h:11, from ./include/linux/spinlock.h:56, from net/vmw_vsock/virtio_transport_common.c:9: net/vmw_vsock/virtio_transport_common.c: In function ‘virtio_transport_can_zcopy‘: ./include/linux/minmax.h:20:35: error: comparison of distinct pointer types lacks a cast [-Werror] 20 | (!!(sizeof((typeof(x) *)1 == (typeof(y) *)1))) | ^~ ./include/linux/minmax.h:26:18: note: in expansion of macro ‘__typecheck‘ 26 | (__typecheck(x, y) && __no_side_effects(x, y)) | ^~~~~~~~~~~ ./include/linux/minmax.h:36:31: note: in expansion of macro ‘__safe_cmp‘ 36 | __builtin_choose_expr(__safe_cmp(x, y), \ | ^~~~~~~~~~ ./include/linux/minmax.h:45:25: note: in expansion of macro ‘__careful_cmp‘ 45 | #define min(x, y) __careful_cmp(x, y, <) | ^~~~~~~~~~~~~ net/vmw_vsock/virtio_transport_common.c:63:37: note: in expansion of macro ‘min‘ 63 | int pages_to_send = min(pages_in_iov, MAX_SKB_FRAGS); We could solve it by using min_t(), but this operation seems entirely unnecessary, because we also pass MAX_SKB_FRAGS to iov_iter_npages(), which performs almost the same check, returning at most MAX_SKB_FRAGS elements. So, let's eliminate this unnecessary comparison. Fixes: 581512a6dc93 ("vsock/virtio: MSG_ZEROCOPY flag support") Cc: avkrasnov@salutedevices.com Signed-off-by: Stefano Garzarella Acked-by: Michael S. Tsirkin Reviewed-by: Arseniy Krasnov Link: https://lore.kernel.org/r/20231206164143.281107-1-sgarzare@redhat.com Signed-off-by: Jakub Kicinski --- net/vmw_vsock/virtio_transport_common.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/net/vmw_vsock/virtio_transport_common.c b/net/vmw_vsock/virtio_transport_common.c index f6dc896bf44c..c8e162c9d1df 100644 --- a/net/vmw_vsock/virtio_transport_common.c +++ b/net/vmw_vsock/virtio_transport_common.c @@ -59,8 +59,7 @@ static bool virtio_transport_can_zcopy(const struct virtio_transport *t_ops, t_ops = virtio_transport_get_ops(info->vsk); if (t_ops->can_msgzerocopy) { - int pages_in_iov = iov_iter_npages(iov_iter, MAX_SKB_FRAGS); - int pages_to_send = min(pages_in_iov, MAX_SKB_FRAGS); + int pages_to_send = iov_iter_npages(iov_iter, MAX_SKB_FRAGS); /* +1 is for packet header. */ return t_ops->can_msgzerocopy(pages_to_send + 1); -- cgit v1.2.3 From b39113349de60e9b0bc97c2e129181b193c45054 Mon Sep 17 00:00:00 2001 From: Yu Kuai Date: Thu, 7 Dec 2023 10:07:24 +0800 Subject: md: split MD_RECOVERY_NEEDED out of mddev_resume New mddev_resume() calls are added to synchronize IO with array reconfiguration, however, this introduces a performance regression while adding it in md_start_sync(): 1) someone sets MD_RECOVERY_NEEDED first; 2) daemon thread grabs reconfig_mutex, then clears MD_RECOVERY_NEEDED and queues a new sync work; 3) daemon thread releases reconfig_mutex; 4) in md_start_sync a) check that there are spares that can be added/removed, then suspend the array; b) remove_and_add_spares may not be called, or called without really add/remove spares; c) resume the array, then set MD_RECOVERY_NEEDED again! Loop between 2 - 4, then mddev_suspend() will be called quite often, for consequence, normal IO will be quite slow. Fix this problem by don't set MD_RECOVERY_NEEDED again in md_start_sync(), hence the loop will be broken. Fixes: bc08041b32ab ("md: suspend array in md_start_sync() if array need reconfiguration") Suggested-by: Song Liu Reported-by: Janpieter Sollie Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218200 Signed-off-by: Yu Kuai Signed-off-by: Song Liu Link: https://lore.kernel.org/r/20231207020724.2797445-1-yukuai1@huaweicloud.com --- drivers/md/md.c | 30 ++++++++++++++++++++++++++---- 1 file changed, 26 insertions(+), 4 deletions(-) diff --git a/drivers/md/md.c b/drivers/md/md.c index bc9d67af1961..b066abbffd10 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -490,7 +490,7 @@ int mddev_suspend(struct mddev *mddev, bool interruptible) } EXPORT_SYMBOL_GPL(mddev_suspend); -void mddev_resume(struct mddev *mddev) +static void __mddev_resume(struct mddev *mddev, bool recovery_needed) { lockdep_assert_not_held(&mddev->reconfig_mutex); @@ -507,12 +507,18 @@ void mddev_resume(struct mddev *mddev) percpu_ref_resurrect(&mddev->active_io); wake_up(&mddev->sb_wait); - set_bit(MD_RECOVERY_NEEDED, &mddev->recovery); + if (recovery_needed) + set_bit(MD_RECOVERY_NEEDED, &mddev->recovery); md_wakeup_thread(mddev->thread); md_wakeup_thread(mddev->sync_thread); /* possibly kick off a reshape */ mutex_unlock(&mddev->suspend_mutex); } + +void mddev_resume(struct mddev *mddev) +{ + return __mddev_resume(mddev, true); +} EXPORT_SYMBOL_GPL(mddev_resume); /* @@ -9389,7 +9395,15 @@ static void md_start_sync(struct work_struct *ws) goto not_running; } - suspend ? mddev_unlock_and_resume(mddev) : mddev_unlock(mddev); + mddev_unlock(mddev); + /* + * md_start_sync was triggered by MD_RECOVERY_NEEDED, so we should + * not set it again. Otherwise, we may cause issue like this one: + * https://bugzilla.kernel.org/show_bug.cgi?id=218200 + * Therefore, use __mddev_resume(mddev, false). + */ + if (suspend) + __mddev_resume(mddev, false); md_wakeup_thread(mddev->sync_thread); sysfs_notify_dirent_safe(mddev->sysfs_action); md_new_event(); @@ -9401,7 +9415,15 @@ not_running: clear_bit(MD_RECOVERY_REQUESTED, &mddev->recovery); clear_bit(MD_RECOVERY_CHECK, &mddev->recovery); clear_bit(MD_RECOVERY_RUNNING, &mddev->recovery); - suspend ? mddev_unlock_and_resume(mddev) : mddev_unlock(mddev); + mddev_unlock(mddev); + /* + * md_start_sync was triggered by MD_RECOVERY_NEEDED, so we should + * not set it again. Otherwise, we may cause issue like this one: + * https://bugzilla.kernel.org/show_bug.cgi?id=218200 + * Therefore, use __mddev_resume(mddev, false). + */ + if (suspend) + __mddev_resume(mddev, false); wake_up(&resync_wait); if (test_and_clear_bit(MD_RECOVERY_RECOVER, &mddev->recovery) && -- cgit v1.2.3 From 634e5e1e06f5cdd614a1bc429ecb243a51cc009d Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Thu, 7 Dec 2023 19:20:35 +0100 Subject: ALSA: hda/realtek: Add quirk for Lenovo Yoga Pro 7 Lenovo Yoga Pro 7 14APH8 (PCI SSID 17aa:3882) seems requiring the similar workaround like Yoga 9 model for the bass speaker. Cc: Link: https://lore.kernel.org/r/CAGGk=CRRQ1L9p771HsXTN_ebZP41Qj+3gw35Gezurn+nokRewg@mail.gmail.com Link: https://lore.kernel.org/r/20231207182035.30248-1-tiwai@suse.de Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 5b5f298870be..0377912e9264 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -10206,6 +10206,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x17aa, 0x387d, "Yoga S780-16 pro Quad AAC", ALC287_FIXUP_TAS2781_I2C), SND_PCI_QUIRK(0x17aa, 0x387e, "Yoga S780-16 pro Quad YC", ALC287_FIXUP_TAS2781_I2C), SND_PCI_QUIRK(0x17aa, 0x3881, "YB9 dual power mode2 YC", ALC287_FIXUP_TAS2781_I2C), + SND_PCI_QUIRK(0x17aa, 0x3882, "Lenovo Yoga Pro 7 14APH8", ALC287_FIXUP_YOGA9_14IAP7_BASS_SPK_PIN), SND_PCI_QUIRK(0x17aa, 0x3884, "Y780 YG DUAL", ALC287_FIXUP_TAS2781_I2C), SND_PCI_QUIRK(0x17aa, 0x3886, "Y780 VECO DUAL", ALC287_FIXUP_TAS2781_I2C), SND_PCI_QUIRK(0x17aa, 0x38a7, "Y780P AMD YG dual", ALC287_FIXUP_TAS2781_I2C), -- cgit v1.2.3 From 8f0b960a42badda7a2781e8a33564624200debc9 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Thu, 7 Dec 2023 19:28:10 +0100 Subject: ACPI: utils: Fix error path in acpi_evaluate_reference() If a pointer to an uninitialized struct acpi_handle_list is passed to acpi_evaluate_reference() and it decides to bail out early, either because acpi_evaluate_object() fails, or because it produces invalid data, the handles pointer from the struct acpi_handle_list will be passed to kfree() and if it is not NULL, the kernel will crash on an attempt to free unallocated memory. Address this by moving the "end" label in acpi_evaluate_reference() to the end of the function, which is sufficient, because no cleanup is needed in that case. Fixes: 2e57d10a6591 ("ACPI: utils: Dynamically determine acpi_handle_list size") Signed-off-by: Rafael J. Wysocki Tested-by: Woody Suwalski --- drivers/acpi/utils.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/acpi/utils.c b/drivers/acpi/utils.c index 28c75242fca9..62944e35fcee 100644 --- a/drivers/acpi/utils.c +++ b/drivers/acpi/utils.c @@ -399,13 +399,13 @@ acpi_evaluate_reference(acpi_handle handle, acpi_handle_debug(list->handles[i], "Found in reference list\n"); } -end: if (ACPI_FAILURE(status)) { list->count = 0; kfree(list->handles); list->handles = NULL; } +end: kfree(buffer.pointer); return status; -- cgit v1.2.3 From 6f5c4eca48ffe18307b4e1d375817691c9005c87 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Wed, 6 Dec 2023 19:11:14 -0800 Subject: cxl/hdm: Fix dpa translation locking The helper, cxl_dpa_resource_start(), snapshots the dpa-address of an endpoint-decoder after acquiring the cxl_dpa_rwsem. However, it is sufficient to assert that cxl_dpa_rwsem is held rather than acquire it in the helper. Otherwise, it triggers multiple lockdep reports: 1/ Tracing callbacks are in an atomic context that can not acquire sleeping locks: BUG: sleeping function called from invalid context at kernel/locking/rwsem.c:1525 in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 1288, name: bash preempt_count: 2, expected: 0 RCU nest depth: 0, expected: 0 [..] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS edk2-20230524-3.fc38 05/24/2023 Call Trace: dump_stack_lvl+0x71/0x90 __might_resched+0x1b2/0x2c0 down_read+0x1a/0x190 cxl_dpa_resource_start+0x15/0x50 [cxl_core] cxl_trace_hpa+0x122/0x300 [cxl_core] trace_event_raw_event_cxl_poison+0x1c9/0x2d0 [cxl_core] 2/ The rwsem is already held in the inject poison path: WARNING: possible recursive locking detected 6.7.0-rc2+ #12 Tainted: G W OE N -------------------------------------------- bash/1288 is trying to acquire lock: ffffffffc05f73d0 (cxl_dpa_rwsem){++++}-{3:3}, at: cxl_dpa_resource_start+0x15/0x50 [cxl_core] but task is already holding lock: ffffffffc05f73d0 (cxl_dpa_rwsem){++++}-{3:3}, at: cxl_inject_poison+0x7d/0x1e0 [cxl_core] [..] Call Trace: dump_stack_lvl+0x71/0x90 __might_resched+0x1b2/0x2c0 down_read+0x1a/0x190 cxl_dpa_resource_start+0x15/0x50 [cxl_core] cxl_trace_hpa+0x122/0x300 [cxl_core] trace_event_raw_event_cxl_poison+0x1c9/0x2d0 [cxl_core] __traceiter_cxl_poison+0x5c/0x80 [cxl_core] cxl_inject_poison+0x1bc/0x1e0 [cxl_core] This appears to have been an issue since the initial implementation and uncovered by the new cxl-poison.sh test [1]. That test is now passing with these changes. Fixes: 28a3ae4ff66c ("cxl/trace: Add an HPA to cxl_poison trace events") Link: http://lore.kernel.org/r/e4f2716646918135ddbadf4146e92abb659de734.1700615159.git.alison.schofield@intel.com [1] Cc: Cc: Alison Schofield Cc: Jonathan Cameron Cc: Dave Jiang Cc: Ira Weiny Signed-off-by: Dan Williams --- drivers/cxl/core/hdm.c | 3 +-- drivers/cxl/core/port.c | 4 ++-- 2 files changed, 3 insertions(+), 4 deletions(-) diff --git a/drivers/cxl/core/hdm.c b/drivers/cxl/core/hdm.c index 529baa8a1759..7d97790b893d 100644 --- a/drivers/cxl/core/hdm.c +++ b/drivers/cxl/core/hdm.c @@ -363,10 +363,9 @@ resource_size_t cxl_dpa_resource_start(struct cxl_endpoint_decoder *cxled) { resource_size_t base = -1; - down_read(&cxl_dpa_rwsem); + lockdep_assert_held(&cxl_dpa_rwsem); if (cxled->dpa_res) base = cxled->dpa_res->start; - up_read(&cxl_dpa_rwsem); return base; } diff --git a/drivers/cxl/core/port.c b/drivers/cxl/core/port.c index 38441634e4c6..b7c93bb18f6e 100644 --- a/drivers/cxl/core/port.c +++ b/drivers/cxl/core/port.c @@ -226,9 +226,9 @@ static ssize_t dpa_resource_show(struct device *dev, struct device_attribute *at char *buf) { struct cxl_endpoint_decoder *cxled = to_cxl_endpoint_decoder(dev); - u64 base = cxl_dpa_resource_start(cxled); - return sysfs_emit(buf, "%#llx\n", base); + guard(rwsem_read)(&cxl_dpa_rwsem); + return sysfs_emit(buf, "%#llx\n", (u64)cxl_dpa_resource_start(cxled)); } static DEVICE_ATTR_RO(dpa_resource); -- cgit v1.2.3 From 6d1980f0af439b5fd49b1bee2220deff6888792e Mon Sep 17 00:00:00 2001 From: Kent Overstreet Date: Thu, 7 Dec 2023 12:39:13 -0500 Subject: bcachefs: Fix deleted inode check for dirs We could delete directories transactionally on rmdir()/unlink(), but we don't; instead, like with regular files we wait for the VFS to call evict(). That means that our check for directories in the deleted inodes btree is wrong - the check should be for non-empty directories. Signed-off-by: Kent Overstreet --- fs/bcachefs/dirent.c | 19 +++++++++++-------- fs/bcachefs/dirent.h | 1 + fs/bcachefs/inode.c | 15 ++++++++++----- 3 files changed, 22 insertions(+), 13 deletions(-) diff --git a/fs/bcachefs/dirent.c b/fs/bcachefs/dirent.c index 1a0f2d571569..2bfff0da7000 100644 --- a/fs/bcachefs/dirent.c +++ b/fs/bcachefs/dirent.c @@ -485,20 +485,15 @@ retry: return ret; } -int bch2_empty_dir_trans(struct btree_trans *trans, subvol_inum dir) +int bch2_empty_dir_snapshot(struct btree_trans *trans, u64 dir, u32 snapshot) { struct btree_iter iter; struct bkey_s_c k; - u32 snapshot; int ret; - ret = bch2_subvolume_get_snapshot(trans, dir.subvol, &snapshot); - if (ret) - return ret; - for_each_btree_key_upto_norestart(trans, iter, BTREE_ID_dirents, - SPOS(dir.inum, 0, snapshot), - POS(dir.inum, U64_MAX), 0, k, ret) + SPOS(dir, 0, snapshot), + POS(dir, U64_MAX), 0, k, ret) if (k.k->type == KEY_TYPE_dirent) { ret = -ENOTEMPTY; break; @@ -508,6 +503,14 @@ int bch2_empty_dir_trans(struct btree_trans *trans, subvol_inum dir) return ret; } +int bch2_empty_dir_trans(struct btree_trans *trans, subvol_inum dir) +{ + u32 snapshot; + + return bch2_subvolume_get_snapshot(trans, dir.subvol, &snapshot) ?: + bch2_empty_dir_snapshot(trans, dir.inum, snapshot); +} + int bch2_readdir(struct bch_fs *c, subvol_inum inum, struct dir_context *ctx) { struct btree_trans *trans = bch2_trans_get(c); diff --git a/fs/bcachefs/dirent.h b/fs/bcachefs/dirent.h index cd262bf4d9c5..1e3431990abd 100644 --- a/fs/bcachefs/dirent.h +++ b/fs/bcachefs/dirent.h @@ -64,6 +64,7 @@ u64 bch2_dirent_lookup(struct bch_fs *, subvol_inum, const struct bch_hash_info *, const struct qstr *, subvol_inum *); +int bch2_empty_dir_snapshot(struct btree_trans *, u64, u32); int bch2_empty_dir_trans(struct btree_trans *, subvol_inum); int bch2_readdir(struct bch_fs *, subvol_inum, struct dir_context *); diff --git a/fs/bcachefs/inode.c b/fs/bcachefs/inode.c index c7849b0753e7..9309cfeecd8d 100644 --- a/fs/bcachefs/inode.c +++ b/fs/bcachefs/inode.c @@ -7,6 +7,7 @@ #include "btree_update.h" #include "buckets.h" #include "compress.h" +#include "dirent.h" #include "error.h" #include "extents.h" #include "extent_update.h" @@ -1093,11 +1094,15 @@ static int may_delete_deleted_inode(struct btree_trans *trans, if (ret) goto out; - if (fsck_err_on(S_ISDIR(inode.bi_mode), c, - deleted_inode_is_dir, - "directory %llu:%u in deleted_inodes btree", - pos.offset, pos.snapshot)) - goto delete; + if (S_ISDIR(inode.bi_mode)) { + ret = bch2_empty_dir_snapshot(trans, pos.offset, pos.snapshot); + if (fsck_err_on(ret == -ENOTEMPTY, c, deleted_inode_is_dir, + "non empty directory %llu:%u in deleted_inodes btree", + pos.offset, pos.snapshot)) + goto delete; + if (ret) + goto out; + } if (fsck_err_on(!(inode.bi_flags & BCH_INODE_unlinked), c, deleted_inode_not_unlinked, -- cgit v1.2.3 From 3823119b9c2b5f9e9b760336f75bc989b805cde6 Mon Sep 17 00:00:00 2001 From: Ziqi Zhao Date: Fri, 21 Jul 2023 09:14:46 -0700 Subject: drm/crtc: Fix uninit-value bug in drm_mode_setcrtc The connector_set contains uninitialized values when allocated with kmalloc_array. However, in the "out" branch, the logic assumes that any element in connector_set would be equal to NULL if failed to initialize, which causes the bug reported by Syzbot. The fix is to use an extra variable to keep track of how many connectors are initialized indeed, and use that variable to decrease any refcounts in the "out" branch. Reported-by: syzbot+4fad2e57beb6397ab2fc@syzkaller.appspotmail.com Signed-off-by: Ziqi Zhao Reported-and-tested-by: syzbot+4fad2e57beb6397ab2fc@syzkaller.appspotmail.com Tested-by: Harshit Mogalapalli Link: https://lore.kernel.org/r/20230721161446.8602-1-astrajoan@yahoo.com Signed-off-by: Maxime Ripard --- drivers/gpu/drm/drm_crtc.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/drm_crtc.c b/drivers/gpu/drm/drm_crtc.c index df9bf3c9206e..d718c17ab1e9 100644 --- a/drivers/gpu/drm/drm_crtc.c +++ b/drivers/gpu/drm/drm_crtc.c @@ -715,8 +715,7 @@ int drm_mode_setcrtc(struct drm_device *dev, void *data, struct drm_mode_set set; uint32_t __user *set_connectors_ptr; struct drm_modeset_acquire_ctx ctx; - int ret; - int i; + int ret, i, num_connectors; if (!drm_core_check_feature(dev, DRIVER_MODESET)) return -EOPNOTSUPP; @@ -851,6 +850,7 @@ int drm_mode_setcrtc(struct drm_device *dev, void *data, goto out; } + num_connectors = 0; for (i = 0; i < crtc_req->count_connectors; i++) { connector_set[i] = NULL; set_connectors_ptr = (uint32_t __user *)(unsigned long)crtc_req->set_connectors_ptr; @@ -871,6 +871,7 @@ int drm_mode_setcrtc(struct drm_device *dev, void *data, connector->name); connector_set[i] = connector; + num_connectors++; } } @@ -879,7 +880,7 @@ int drm_mode_setcrtc(struct drm_device *dev, void *data, set.y = crtc_req->y; set.mode = mode; set.connectors = connector_set; - set.num_connectors = crtc_req->count_connectors; + set.num_connectors = num_connectors; set.fb = fb; if (drm_drv_uses_atomic_modeset(dev)) @@ -892,7 +893,7 @@ out: drm_framebuffer_put(fb); if (connector_set) { - for (i = 0; i < crtc_req->count_connectors; i++) { + for (i = 0; i < num_connectors; i++) { if (connector_set[i]) drm_connector_put(connector_set[i]); } -- cgit v1.2.3 From e5dc5afff62f3e97e86c3643ec9fcad23de4f2d3 Mon Sep 17 00:00:00 2001 From: Judy Hsiao Date: Wed, 6 Dec 2023 03:38:33 +0000 Subject: neighbour: Don't let neigh_forced_gc() disable preemption for long We are seeing cases where neigh_cleanup_and_release() is called by neigh_forced_gc() many times in a row with preemption turned off. When running on a low powered CPU at a low CPU frequency, this has been measured to keep preemption off for ~10 ms. That's not great on a system with HZ=1000 which expects tasks to be able to schedule in with ~1ms latency. Suggested-by: Douglas Anderson Signed-off-by: Judy Hsiao Reviewed-by: David Ahern Reviewed-by: Eric Dumazet Reviewed-by: Douglas Anderson Signed-off-by: David S. Miller --- net/core/neighbour.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/net/core/neighbour.c b/net/core/neighbour.c index df81c1f0a570..552719c3bbc3 100644 --- a/net/core/neighbour.c +++ b/net/core/neighbour.c @@ -253,9 +253,11 @@ static int neigh_forced_gc(struct neigh_table *tbl) { int max_clean = atomic_read(&tbl->gc_entries) - READ_ONCE(tbl->gc_thresh2); + u64 tmax = ktime_get_ns() + NSEC_PER_MSEC; unsigned long tref = jiffies - 5 * HZ; struct neighbour *n, *tmp; int shrunk = 0; + int loop = 0; NEIGH_CACHE_STAT_INC(tbl, forced_gc_runs); @@ -278,11 +280,16 @@ static int neigh_forced_gc(struct neigh_table *tbl) shrunk++; if (shrunk >= max_clean) break; + if (++loop == 16) { + if (ktime_get_ns() > tmax) + goto unlock; + loop = 0; + } } } WRITE_ONCE(tbl->last_flush, jiffies); - +unlock: write_unlock_bh(&tbl->lock); return shrunk; -- cgit v1.2.3 From bd4a816752bab609dd6d65ae021387beb9e2ddbd Mon Sep 17 00:00:00 2001 From: Maciej Żenczykowski Date: Wed, 6 Dec 2023 09:36:12 -0800 Subject: net: ipv6: support reporting otherwise unknown prefix flags in RTM_NEWPREFIX MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Lorenzo points out that we effectively clear all unknown flags from PIO when copying them to userspace in the netlink RTM_NEWPREFIX notification. We could fix this one at a time as new flags are defined, or in one fell swoop - I choose the latter. We could either define 6 new reserved flags (reserved1..6) and handle them individually (and rename them as new flags are defined), or we could simply copy the entire unmodified byte over - I choose the latter. This unfortunately requires some anonymous union/struct magic, so we add a static assert on the struct size for a little extra safety. Cc: David Ahern Cc: Lorenzo Colitti Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Maciej Żenczykowski Reviewed-by: David Ahern Signed-off-by: David S. Miller --- include/net/addrconf.h | 12 ++++++++++-- include/net/if_inet6.h | 4 ---- net/ipv6/addrconf.c | 6 +----- 3 files changed, 11 insertions(+), 11 deletions(-) diff --git a/include/net/addrconf.h b/include/net/addrconf.h index 82da55101b5a..61ebe723ee4d 100644 --- a/include/net/addrconf.h +++ b/include/net/addrconf.h @@ -31,17 +31,22 @@ struct prefix_info { __u8 length; __u8 prefix_len; + union __packed { + __u8 flags; + struct __packed { #if defined(__BIG_ENDIAN_BITFIELD) - __u8 onlink : 1, + __u8 onlink : 1, autoconf : 1, reserved : 6; #elif defined(__LITTLE_ENDIAN_BITFIELD) - __u8 reserved : 6, + __u8 reserved : 6, autoconf : 1, onlink : 1; #else #error "Please fix " #endif + }; + }; __be32 valid; __be32 prefered; __be32 reserved2; @@ -49,6 +54,9 @@ struct prefix_info { struct in6_addr prefix; }; +/* rfc4861 4.6.2: IPv6 PIO is 32 bytes in size */ +static_assert(sizeof(struct prefix_info) == 32); + #include #include #include diff --git a/include/net/if_inet6.h b/include/net/if_inet6.h index 3e454c4d7ba6..f07642264c1e 100644 --- a/include/net/if_inet6.h +++ b/include/net/if_inet6.h @@ -22,10 +22,6 @@ #define IF_RS_SENT 0x10 #define IF_READY 0x80000000 -/* prefix flags */ -#define IF_PREFIX_ONLINK 0x01 -#define IF_PREFIX_AUTOCONF 0x02 - enum { INET6_IFADDR_STATE_PREDAD, INET6_IFADDR_STATE_DAD, diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c index 3aaea56b5166..2692a7b24c40 100644 --- a/net/ipv6/addrconf.c +++ b/net/ipv6/addrconf.c @@ -6149,11 +6149,7 @@ static int inet6_fill_prefix(struct sk_buff *skb, struct inet6_dev *idev, pmsg->prefix_len = pinfo->prefix_len; pmsg->prefix_type = pinfo->type; pmsg->prefix_pad3 = 0; - pmsg->prefix_flags = 0; - if (pinfo->onlink) - pmsg->prefix_flags |= IF_PREFIX_ONLINK; - if (pinfo->autoconf) - pmsg->prefix_flags |= IF_PREFIX_AUTOCONF; + pmsg->prefix_flags = pinfo->flags; if (nla_put(skb, PREFIX_ADDRESS, sizeof(pinfo->prefix), &pinfo->prefix)) goto nla_put_failure; -- cgit v1.2.3 From 14c200b7ca46b9a9f4af9e81d258a58274320b6f Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Mon, 4 Dec 2023 16:06:01 +0100 Subject: platform/x86: intel-vbtn: Fix missing tablet-mode-switch events MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit 2 issues have been reported on the Dell Inspiron 7352: 1. Sometimes the tablet-mode-switch stops reporting tablet-mode change events. Add a "VBDL" call to notify_handler() to work around this. 2. Sometimes the tablet-mode is incorrect after suspend/resume Add a detect_tablet_mode() to resume() to fix this. Reported-by: Arnold Gozum Closes: https://lore.kernel.org/platform-driver-x86/87271a74-c831-4eec-b7a4-1371d0e42471@gmail.com/ Tested-by: Arnold Gozum Signed-off-by: Hans de Goede Reviewed-by: Andy Shevchenko Link: https://lore.kernel.org/r/20231204150601.46976-1-hdegoede@redhat.com Reviewed-by: Ilpo Järvinen Signed-off-by: Ilpo Järvinen --- drivers/platform/x86/intel/vbtn.c | 19 +++++++++++++++---- 1 file changed, 15 insertions(+), 4 deletions(-) diff --git a/drivers/platform/x86/intel/vbtn.c b/drivers/platform/x86/intel/vbtn.c index 6fa1735ad7a4..210b0a81b7ec 100644 --- a/drivers/platform/x86/intel/vbtn.c +++ b/drivers/platform/x86/intel/vbtn.c @@ -73,10 +73,10 @@ struct intel_vbtn_priv { bool wakeup_mode; }; -static void detect_tablet_mode(struct platform_device *device) +static void detect_tablet_mode(struct device *dev) { - struct intel_vbtn_priv *priv = dev_get_drvdata(&device->dev); - acpi_handle handle = ACPI_HANDLE(&device->dev); + struct intel_vbtn_priv *priv = dev_get_drvdata(dev); + acpi_handle handle = ACPI_HANDLE(dev); unsigned long long vgbs; acpi_status status; int m; @@ -89,6 +89,8 @@ static void detect_tablet_mode(struct platform_device *device) input_report_switch(priv->switches_dev, SW_TABLET_MODE, m); m = (vgbs & VGBS_DOCK_MODE_FLAG) ? 1 : 0; input_report_switch(priv->switches_dev, SW_DOCK, m); + + input_sync(priv->switches_dev); } /* @@ -134,7 +136,7 @@ static int intel_vbtn_input_setup(struct platform_device *device) priv->switches_dev->id.bustype = BUS_HOST; if (priv->has_switches) { - detect_tablet_mode(device); + detect_tablet_mode(&device->dev); ret = input_register_device(priv->switches_dev); if (ret) @@ -198,6 +200,9 @@ static void notify_handler(acpi_handle handle, u32 event, void *context) autorelease = val && (!ke_rel || ke_rel->type == KE_IGNORE); sparse_keymap_report_event(input_dev, event, val, autorelease); + + /* Some devices need this to report further events */ + acpi_evaluate_object(handle, "VBDL", NULL, NULL); } /* @@ -352,7 +357,13 @@ static void intel_vbtn_pm_complete(struct device *dev) static int intel_vbtn_pm_resume(struct device *dev) { + struct intel_vbtn_priv *priv = dev_get_drvdata(dev); + intel_vbtn_pm_complete(dev); + + if (priv->has_switches) + detect_tablet_mode(dev); + return 0; } -- cgit v1.2.3 From 17fe3ec0c110b4afc04052e2a33b146766aac8a1 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Tue, 5 Dec 2023 22:01:43 -0800 Subject: platform/x86: thinkpad_acpi: fix kernel-doc warnings MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Add a function's return description and don't misuse "/**" for non-kernel-doc comments to prevent warnings from scripts/kernel-doc. thinkpad_acpi.c:523: warning: No description found for return value of 'tpacpi_check_quirks' thinkpad_acpi.c:9307: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst thinkpad_acpi.c:9307: warning: missing initial short description on line: * This evaluates a ACPI method call specific to the battery Signed-off-by: Randy Dunlap Cc: Henrique de Moraes Holschuh Cc: Hans de Goede Cc: Ilpo Järvinen CC: ibm-acpi-devel@lists.sourceforge.net CC: platform-driver-x86@vger.kernel.org Reviewed-by: mpearson-lenovo@squebb.ca Link: https://lore.kernel.org/r/20231206060144.8260-1-rdunlap@infradead.org Reviewed-by: Ilpo Järvinen Signed-off-by: Ilpo Järvinen --- drivers/platform/x86/thinkpad_acpi.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c index d0b5fd4137bc..3392ae99ac3f 100644 --- a/drivers/platform/x86/thinkpad_acpi.c +++ b/drivers/platform/x86/thinkpad_acpi.c @@ -512,10 +512,10 @@ struct tpacpi_quirk { * Iterates over a quirks list until one is found that matches the * ThinkPad's vendor, BIOS and EC model. * - * Returns 0 if nothing matches, otherwise returns the quirks field of + * Returns: %0 if nothing matches, otherwise returns the quirks field of * the matching &struct tpacpi_quirk entry. * - * The match criteria is: vendor, ec and bios much match. + * The match criteria is: vendor, ec and bios must match. */ static unsigned long __init tpacpi_check_quirks( const struct tpacpi_quirk *qlist, @@ -9303,7 +9303,7 @@ static struct tpacpi_battery_driver_data battery_info; /* ACPI helpers/functions/probes */ -/** +/* * This evaluates a ACPI method call specific to the battery * ACPI extension. The specifics are that an error is marked * in the 32rd bit of the response, so we just check that here. -- cgit v1.2.3 From 7bcd032370f88fd4022b6926d101403e96a86309 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Tue, 5 Dec 2023 22:01:18 -0800 Subject: platform/x86: intel_ips: fix kernel-doc formatting MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Fix kernel-doc function notation and comment formatting to prevent warnings from scripts/kernel-doc. for drivers/platform/x86/intel_ips.c: 595: warning: No description found for return value of 'mcp_exceeded' 624: warning: No description found for return value of 'cpu_exceeded' 650: warning: No description found for return value of 'mch_exceeded' 745: warning: bad line: cpu+ gpu+ cpu+gpu- cpu-gpu+ cpu-gpu- 746: warning: bad line: cpu < gpu < cpu+gpu+ cpu+ gpu+ nothing 753: warning: No description found for return value of 'ips_adjust' 747: warning: bad line: cpu < gpu >= cpu+gpu-(mcp<) cpu+gpu-(mcp<) gpu- gpu- 748: warning: bad line: cpu >= gpu < cpu-gpu+(mcp<) cpu- cpu-gpu+(mcp<) cpu- 749: warning: bad line: cpu >= gpu >= cpu-gpu- cpu-gpu- cpu-gpu- cpu-gpu- 945: warning: No description found for return value of 'ips_monitor' 1151: warning: No description found for return value of 'ips_irq_handler' 1301: warning: Function parameter or member 'ips' not described in 'ips_detect_cpu' 1302: warning: No description found for return value of 'ips_detect_cpu' 1358: warning: No description found for return value of 'ips_get_i915_syms' Signed-off-by: Randy Dunlap Cc: Hans de Goede Cc: Ilpo Järvinen Cc: platform-driver-x86@vger.kernel.org Link: https://lore.kernel.org/r/20231206060120.4816-1-rdunlap@infradead.org Reviewed-by: Ilpo Järvinen Signed-off-by: Ilpo Järvinen --- drivers/platform/x86/intel_ips.c | 30 +++++++++++++++++++++++------- 1 file changed, 23 insertions(+), 7 deletions(-) diff --git a/drivers/platform/x86/intel_ips.c b/drivers/platform/x86/intel_ips.c index 4dfdbfca6841..c66808601fdd 100644 --- a/drivers/platform/x86/intel_ips.c +++ b/drivers/platform/x86/intel_ips.c @@ -590,6 +590,8 @@ static void ips_disable_gpu_turbo(struct ips_driver *ips) * @ips: IPS driver struct * * Check whether the MCP is over its thermal or power budget. + * + * Returns: %true if the temp or power has exceeded its maximum, else %false */ static bool mcp_exceeded(struct ips_driver *ips) { @@ -619,6 +621,8 @@ static bool mcp_exceeded(struct ips_driver *ips) * @cpu: CPU number to check * * Check a given CPU's average temp or power is over its limit. + * + * Returns: %true if the temp or power has exceeded its maximum, else %false */ static bool cpu_exceeded(struct ips_driver *ips, int cpu) { @@ -645,6 +649,8 @@ static bool cpu_exceeded(struct ips_driver *ips, int cpu) * @ips: IPS driver struct * * Check the MCH temp & power against their maximums. + * + * Returns: %true if the temp or power has exceeded its maximum, else %false */ static bool mch_exceeded(struct ips_driver *ips) { @@ -742,12 +748,13 @@ static void update_turbo_limits(struct ips_driver *ips) * - down (at TDP limit) * - adjust both CPU and GPU down if possible * - cpu+ gpu+ cpu+gpu- cpu-gpu+ cpu-gpu- -cpu < gpu < cpu+gpu+ cpu+ gpu+ nothing -cpu < gpu >= cpu+gpu-(mcp<) cpu+gpu-(mcp<) gpu- gpu- -cpu >= gpu < cpu-gpu+(mcp<) cpu- cpu-gpu+(mcp<) cpu- -cpu >= gpu >= cpu-gpu- cpu-gpu- cpu-gpu- cpu-gpu- + * |cpu+ gpu+ cpu+gpu- cpu-gpu+ cpu-gpu- + * cpu < gpu < |cpu+gpu+ cpu+ gpu+ nothing + * cpu < gpu >= |cpu+gpu-(mcp<) cpu+gpu-(mcp<) gpu- gpu- + * cpu >= gpu < |cpu-gpu+(mcp<) cpu- cpu-gpu+(mcp<) cpu- + * cpu >= gpu >=|cpu-gpu- cpu-gpu- cpu-gpu- cpu-gpu- * + * Returns: %0 */ static int ips_adjust(void *data) { @@ -935,11 +942,13 @@ static void monitor_timeout(struct timer_list *t) * @data: ips driver structure * * This is the main function for the IPS driver. It monitors power and - * tempurature in the MCP and adjusts CPU and GPU power clams accordingly. + * temperature in the MCP and adjusts CPU and GPU power clamps accordingly. * - * We keep a 5s moving average of power consumption and tempurature. Using + * We keep a 5s moving average of power consumption and temperature. Using * that data, along with CPU vs GPU preference, we adjust the power clamps * up or down. + * + * Returns: %0 on success or -errno on error */ static int ips_monitor(void *data) { @@ -1146,6 +1155,8 @@ static void dump_thermal_info(struct ips_driver *ips) * Handle temperature limit trigger events, generally by lowering the clamps. * If we're at a critical limit, we clamp back to the lowest possible value * to prevent emergency shutdown. + * + * Returns: IRQ_NONE or IRQ_HANDLED */ static irqreturn_t ips_irq_handler(int irq, void *arg) { @@ -1293,9 +1304,12 @@ static void ips_debugfs_init(struct ips_driver *ips) /** * ips_detect_cpu - detect whether CPU supports IPS + * @ips: IPS driver struct * * Walk our list and see if we're on a supported CPU. If we find one, * return the limits for it. + * + * Returns: the &ips_mcp_limits struct that matches the boot CPU or %NULL */ static struct ips_mcp_limits *ips_detect_cpu(struct ips_driver *ips) { @@ -1352,6 +1366,8 @@ static struct ips_mcp_limits *ips_detect_cpu(struct ips_driver *ips) * monitor and control graphics turbo mode. If we can find them, we can * enable graphics turbo, otherwise we must disable it to avoid exceeding * thermal and power limits in the MCP. + * + * Returns: %true if the required symbols are found, else %false */ static bool ips_get_i915_syms(struct ips_driver *ips) { -- cgit v1.2.3 From 6e455f5dcdd15fa28edf0ffb5b44d3508512dccf Mon Sep 17 00:00:00 2001 From: Jani Nikula Date: Fri, 8 Dec 2023 15:12:38 +0200 Subject: drm/crtc: fix uninitialized variable use Commit 3823119b9c2b ("drm/crtc: Fix uninit-value bug in drm_mode_setcrtc") was supposed to fix use of an uninitialized variable, but introduced another. num_connectors is only initialized if crtc_req->count_connectors > 0, but it's used regardless. Fix it. Fixes: 3823119b9c2b ("drm/crtc: Fix uninit-value bug in drm_mode_setcrtc") Cc: syzbot+4fad2e57beb6397ab2fc@syzkaller.appspotmail.com Cc: Ziqi Zhao Cc: Maxime Ripard Cc: Maarten Lankhorst Cc: Thomas Zimmermann Signed-off-by: Jani Nikula Signed-off-by: Maxime Ripard Link: https://patchwork.freedesktop.org/patch/msgid/20231208131238.2924571-1-jani.nikula@intel.com --- drivers/gpu/drm/drm_crtc.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/gpu/drm/drm_crtc.c b/drivers/gpu/drm/drm_crtc.c index d718c17ab1e9..cb90e70d85e8 100644 --- a/drivers/gpu/drm/drm_crtc.c +++ b/drivers/gpu/drm/drm_crtc.c @@ -715,7 +715,7 @@ int drm_mode_setcrtc(struct drm_device *dev, void *data, struct drm_mode_set set; uint32_t __user *set_connectors_ptr; struct drm_modeset_acquire_ctx ctx; - int ret, i, num_connectors; + int ret, i, num_connectors = 0; if (!drm_core_check_feature(dev, DRIVER_MODESET)) return -EOPNOTSUPP; @@ -850,7 +850,6 @@ int drm_mode_setcrtc(struct drm_device *dev, void *data, goto out; } - num_connectors = 0; for (i = 0; i < crtc_req->count_connectors; i++) { connector_set[i] = NULL; set_connectors_ptr = (uint32_t __user *)(unsigned long)crtc_req->set_connectors_ptr; -- cgit v1.2.3 From d47d9886aeef79feba7adac701a510d65f3682b5 Mon Sep 17 00:00:00 2001 From: Namjae Jeon Date: Fri, 8 Dec 2023 14:33:41 +0900 Subject: ksmbd: send v2 lease break notification for directory If client send different parent key, different client guid, or there is no parent lease key flags in create context v2 lease, ksmbd send lease break to client. Signed-off-by: Namjae Jeon Signed-off-by: Steve French --- fs/smb/common/smb2pdu.h | 1 + fs/smb/server/oplock.c | 56 ++++++++++++++++++++++++++++++++++++++++++----- fs/smb/server/oplock.h | 4 ++++ fs/smb/server/smb2pdu.c | 7 ++++++ fs/smb/server/vfs_cache.c | 13 ++++++++++- fs/smb/server/vfs_cache.h | 2 ++ 6 files changed, 77 insertions(+), 6 deletions(-) diff --git a/fs/smb/common/smb2pdu.h b/fs/smb/common/smb2pdu.h index 9fbaaa387dcc..8b603b13e372 100644 --- a/fs/smb/common/smb2pdu.h +++ b/fs/smb/common/smb2pdu.h @@ -1253,6 +1253,7 @@ struct create_mxac_rsp { #define SMB2_LEASE_WRITE_CACHING_LE cpu_to_le32(0x04) #define SMB2_LEASE_FLAG_BREAK_IN_PROGRESS_LE cpu_to_le32(0x02) +#define SMB2_LEASE_FLAG_PARENT_LEASE_KEY_SET_LE cpu_to_le32(0x04) #define SMB2_LEASE_KEY_SIZE 16 diff --git a/fs/smb/server/oplock.c b/fs/smb/server/oplock.c index 57950ba7e925..147d98427ce8 100644 --- a/fs/smb/server/oplock.c +++ b/fs/smb/server/oplock.c @@ -102,6 +102,7 @@ static int alloc_lease(struct oplock_info *opinfo, struct lease_ctx_info *lctx) lease->new_state = 0; lease->flags = lctx->flags; lease->duration = lctx->duration; + lease->is_dir = lctx->is_dir; memcpy(lease->parent_lease_key, lctx->parent_lease_key, SMB2_LEASE_KEY_SIZE); lease->version = lctx->version; lease->epoch = le16_to_cpu(lctx->epoch); @@ -543,12 +544,13 @@ static struct oplock_info *same_client_has_lease(struct ksmbd_inode *ci, /* upgrading lease */ if ((atomic_read(&ci->op_count) + atomic_read(&ci->sop_count)) == 1) { - if (lease->state == - (lctx->req_state & lease->state)) { + if (lease->state != SMB2_LEASE_NONE_LE && + lease->state == (lctx->req_state & lease->state)) { lease->state |= lctx->req_state; if (lctx->req_state & SMB2_LEASE_WRITE_CACHING_LE) lease_read_to_write(opinfo); + } } else if ((atomic_read(&ci->op_count) + atomic_read(&ci->sop_count)) > 1) { @@ -900,7 +902,8 @@ static int oplock_break(struct oplock_info *brk_opinfo, int req_op_level) lease->new_state = SMB2_LEASE_READ_CACHING_LE; } else { - if (lease->state & SMB2_LEASE_HANDLE_CACHING_LE) + if (lease->state & SMB2_LEASE_HANDLE_CACHING_LE && + !lease->is_dir) lease->new_state = SMB2_LEASE_READ_CACHING_LE; else @@ -1082,6 +1085,48 @@ static void set_oplock_level(struct oplock_info *opinfo, int level, } } +void smb_send_parent_lease_break_noti(struct ksmbd_file *fp, + struct lease_ctx_info *lctx) +{ + struct oplock_info *opinfo; + struct ksmbd_inode *p_ci = NULL; + + if (lctx->version != 2) + return; + + p_ci = ksmbd_inode_lookup_lock(fp->filp->f_path.dentry->d_parent); + if (!p_ci) + return; + + read_lock(&p_ci->m_lock); + list_for_each_entry(opinfo, &p_ci->m_op_list, op_entry) { + if (!opinfo->is_lease) + continue; + + if (opinfo->o_lease->state != SMB2_OPLOCK_LEVEL_NONE && + (!(lctx->flags & SMB2_LEASE_FLAG_PARENT_LEASE_KEY_SET_LE) || + !compare_guid_key(opinfo, fp->conn->ClientGUID, + lctx->parent_lease_key))) { + if (!atomic_inc_not_zero(&opinfo->refcount)) + continue; + + atomic_inc(&opinfo->conn->r_count); + if (ksmbd_conn_releasing(opinfo->conn)) { + atomic_dec(&opinfo->conn->r_count); + continue; + } + + read_unlock(&p_ci->m_lock); + oplock_break(opinfo, SMB2_OPLOCK_LEVEL_NONE); + opinfo_conn_put(opinfo); + read_lock(&p_ci->m_lock); + } + } + read_unlock(&p_ci->m_lock); + + ksmbd_inode_put(p_ci); +} + /** * smb_grant_oplock() - handle oplock/lease request on file open * @work: smb work @@ -1420,10 +1465,11 @@ struct lease_ctx_info *parse_lease_state(void *open_req, bool is_dir) struct create_lease_v2 *lc = (struct create_lease_v2 *)cc; memcpy(lreq->lease_key, lc->lcontext.LeaseKey, SMB2_LEASE_KEY_SIZE); - if (is_dir) + if (is_dir) { lreq->req_state = lc->lcontext.LeaseState & ~SMB2_LEASE_WRITE_CACHING_LE; - else + lreq->is_dir = true; + } else lreq->req_state = lc->lcontext.LeaseState; lreq->flags = lc->lcontext.LeaseFlags; lreq->epoch = lc->lcontext.Epoch; diff --git a/fs/smb/server/oplock.h b/fs/smb/server/oplock.h index 672127318c75..b64d1536882a 100644 --- a/fs/smb/server/oplock.h +++ b/fs/smb/server/oplock.h @@ -36,6 +36,7 @@ struct lease_ctx_info { __u8 parent_lease_key[SMB2_LEASE_KEY_SIZE]; __le16 epoch; int version; + bool is_dir; }; struct lease_table { @@ -54,6 +55,7 @@ struct lease { __u8 parent_lease_key[SMB2_LEASE_KEY_SIZE]; int version; unsigned short epoch; + bool is_dir; struct lease_table *l_lb; }; @@ -125,4 +127,6 @@ struct oplock_info *lookup_lease_in_table(struct ksmbd_conn *conn, int find_same_lease_key(struct ksmbd_session *sess, struct ksmbd_inode *ci, struct lease_ctx_info *lctx); void destroy_lease_table(struct ksmbd_conn *conn); +void smb_send_parent_lease_break_noti(struct ksmbd_file *fp, + struct lease_ctx_info *lctx); #endif /* __KSMBD_OPLOCK_H */ diff --git a/fs/smb/server/smb2pdu.c b/fs/smb/server/smb2pdu.c index 2d3b8acb21e7..45fc4bc3ac19 100644 --- a/fs/smb/server/smb2pdu.c +++ b/fs/smb/server/smb2pdu.c @@ -3225,6 +3225,13 @@ int smb2_open(struct ksmbd_work *work) } } else { if (req_op_level == SMB2_OPLOCK_LEVEL_LEASE) { + /* + * Compare parent lease using parent key. If there is no + * a lease that has same parent key, Send lease break + * notification. + */ + smb_send_parent_lease_break_noti(fp, lc); + req_op_level = smb2_map_lease_to_oplock(lc->req_state); ksmbd_debug(SMB, "lease req for(%s) req oplock state 0x%x, lease state 0x%x\n", diff --git a/fs/smb/server/vfs_cache.c b/fs/smb/server/vfs_cache.c index ddf233994ddb..4e82ff627d12 100644 --- a/fs/smb/server/vfs_cache.c +++ b/fs/smb/server/vfs_cache.c @@ -87,6 +87,17 @@ static struct ksmbd_inode *ksmbd_inode_lookup(struct ksmbd_file *fp) return __ksmbd_inode_lookup(fp->filp->f_path.dentry); } +struct ksmbd_inode *ksmbd_inode_lookup_lock(struct dentry *d) +{ + struct ksmbd_inode *ci; + + read_lock(&inode_hash_lock); + ci = __ksmbd_inode_lookup(d); + read_unlock(&inode_hash_lock); + + return ci; +} + int ksmbd_query_inode_status(struct dentry *dentry) { struct ksmbd_inode *ci; @@ -199,7 +210,7 @@ static void ksmbd_inode_free(struct ksmbd_inode *ci) kfree(ci); } -static void ksmbd_inode_put(struct ksmbd_inode *ci) +void ksmbd_inode_put(struct ksmbd_inode *ci) { if (atomic_dec_and_test(&ci->m_count)) ksmbd_inode_free(ci); diff --git a/fs/smb/server/vfs_cache.h b/fs/smb/server/vfs_cache.h index 8325cf4527c4..4d4938d6029b 100644 --- a/fs/smb/server/vfs_cache.h +++ b/fs/smb/server/vfs_cache.h @@ -138,6 +138,8 @@ struct ksmbd_file *ksmbd_lookup_foreign_fd(struct ksmbd_work *work, u64 id); struct ksmbd_file *ksmbd_lookup_fd_slow(struct ksmbd_work *work, u64 id, u64 pid); void ksmbd_fd_put(struct ksmbd_work *work, struct ksmbd_file *fp); +struct ksmbd_inode *ksmbd_inode_lookup_lock(struct dentry *d); +void ksmbd_inode_put(struct ksmbd_inode *ci); struct ksmbd_file *ksmbd_lookup_durable_fd(unsigned long long id); struct ksmbd_file *ksmbd_lookup_fd_cguid(char *cguid); struct ksmbd_file *ksmbd_lookup_fd_inode(struct dentry *dentry); -- cgit v1.2.3 From c2a721eead71202a0d8ddd9b56ec8dce652c71d1 Mon Sep 17 00:00:00 2001 From: Namjae Jeon Date: Fri, 8 Dec 2023 14:37:56 +0900 Subject: ksmbd: lazy v2 lease break on smb2_write() Don't immediately send directory lease break notification on smb2_write(). Instead, It postpones it until smb2_close(). Signed-off-by: Namjae Jeon Signed-off-by: Steve French --- fs/smb/server/oplock.c | 45 +++++++++++++++++++++++++++++++++++++++++++-- fs/smb/server/oplock.h | 1 + fs/smb/server/vfs.c | 3 +++ fs/smb/server/vfs_cache.h | 1 + 4 files changed, 48 insertions(+), 2 deletions(-) diff --git a/fs/smb/server/oplock.c b/fs/smb/server/oplock.c index 147d98427ce8..562b180459a1 100644 --- a/fs/smb/server/oplock.c +++ b/fs/smb/server/oplock.c @@ -396,8 +396,8 @@ void close_id_del_oplock(struct ksmbd_file *fp) { struct oplock_info *opinfo; - if (S_ISDIR(file_inode(fp->filp)->i_mode)) - return; + if (fp->reserve_lease_break) + smb_lazy_parent_lease_break_close(fp); opinfo = opinfo_get(fp); if (!opinfo) @@ -1127,6 +1127,47 @@ void smb_send_parent_lease_break_noti(struct ksmbd_file *fp, ksmbd_inode_put(p_ci); } +void smb_lazy_parent_lease_break_close(struct ksmbd_file *fp) +{ + struct oplock_info *opinfo; + struct ksmbd_inode *p_ci = NULL; + + rcu_read_lock(); + opinfo = rcu_dereference(fp->f_opinfo); + rcu_read_unlock(); + + if (!opinfo->is_lease || opinfo->o_lease->version != 2) + return; + + p_ci = ksmbd_inode_lookup_lock(fp->filp->f_path.dentry->d_parent); + if (!p_ci) + return; + + read_lock(&p_ci->m_lock); + list_for_each_entry(opinfo, &p_ci->m_op_list, op_entry) { + if (!opinfo->is_lease) + continue; + + if (opinfo->o_lease->state != SMB2_OPLOCK_LEVEL_NONE) { + if (!atomic_inc_not_zero(&opinfo->refcount)) + continue; + + atomic_inc(&opinfo->conn->r_count); + if (ksmbd_conn_releasing(opinfo->conn)) { + atomic_dec(&opinfo->conn->r_count); + continue; + } + read_unlock(&p_ci->m_lock); + oplock_break(opinfo, SMB2_OPLOCK_LEVEL_NONE); + opinfo_conn_put(opinfo); + read_lock(&p_ci->m_lock); + } + } + read_unlock(&p_ci->m_lock); + + ksmbd_inode_put(p_ci); +} + /** * smb_grant_oplock() - handle oplock/lease request on file open * @work: smb work diff --git a/fs/smb/server/oplock.h b/fs/smb/server/oplock.h index b64d1536882a..5b93ea9196c0 100644 --- a/fs/smb/server/oplock.h +++ b/fs/smb/server/oplock.h @@ -129,4 +129,5 @@ int find_same_lease_key(struct ksmbd_session *sess, struct ksmbd_inode *ci, void destroy_lease_table(struct ksmbd_conn *conn); void smb_send_parent_lease_break_noti(struct ksmbd_file *fp, struct lease_ctx_info *lctx); +void smb_lazy_parent_lease_break_close(struct ksmbd_file *fp); #endif /* __KSMBD_OPLOCK_H */ diff --git a/fs/smb/server/vfs.c b/fs/smb/server/vfs.c index 9091dcd7a310..4277750a6da1 100644 --- a/fs/smb/server/vfs.c +++ b/fs/smb/server/vfs.c @@ -517,6 +517,9 @@ int ksmbd_vfs_write(struct ksmbd_work *work, struct ksmbd_file *fp, } } + /* Reserve lease break for parent dir at closing time */ + fp->reserve_lease_break = true; + /* Do we need to break any of a levelII oplock? */ smb_break_all_levII_oplock(work, fp, 1); diff --git a/fs/smb/server/vfs_cache.h b/fs/smb/server/vfs_cache.h index 4d4938d6029b..a528f0cc775a 100644 --- a/fs/smb/server/vfs_cache.h +++ b/fs/smb/server/vfs_cache.h @@ -105,6 +105,7 @@ struct ksmbd_file { struct ksmbd_readdir_data readdir_data; int dot_dotdot[2]; unsigned int f_state; + bool reserve_lease_break; }; static inline void set_ctx_actor(struct dir_context *ctx, -- cgit v1.2.3 From 658609d9a618d8881bf549b5893c0ba8fcff4526 Mon Sep 17 00:00:00 2001 From: Namjae Jeon Date: Mon, 4 Dec 2023 22:20:46 +0900 Subject: ksmbd: avoid duplicate opinfo_put() call on error of smb21_lease_break_ack() opinfo_put() could be called twice on error of smb21_lease_break_ack(). It will cause UAF issue if opinfo is referenced on other places. Signed-off-by: Namjae Jeon Signed-off-by: Steve French --- fs/smb/server/smb2pdu.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/fs/smb/server/smb2pdu.c b/fs/smb/server/smb2pdu.c index 45fc4bc3ac19..f3af83dc49c4 100644 --- a/fs/smb/server/smb2pdu.c +++ b/fs/smb/server/smb2pdu.c @@ -8219,6 +8219,11 @@ static void smb21_lease_break_ack(struct ksmbd_work *work) le32_to_cpu(req->LeaseState)); } + if (ret < 0) { + rsp->hdr.Status = err; + goto err_out; + } + lease_state = lease->state; opinfo->op_state = OPLOCK_STATE_NONE; wake_up_interruptible_all(&opinfo->oplock_q); @@ -8226,11 +8231,6 @@ static void smb21_lease_break_ack(struct ksmbd_work *work) wake_up_interruptible_all(&opinfo->oplock_brk); opinfo_put(opinfo); - if (ret < 0) { - rsp->hdr.Status = err; - goto err_out; - } - rsp->StructureSize = cpu_to_le16(36); rsp->Reserved = 0; rsp->Flags = 0; -- cgit v1.2.3 From a9f106c765c12d2f58aa33431bd8ce8e9d8a404a Mon Sep 17 00:00:00 2001 From: Namjae Jeon Date: Mon, 4 Dec 2023 22:23:34 +0900 Subject: ksmbd: fix wrong allocation size update in smb2_open() When client send SMB2_CREATE_ALLOCATION_SIZE create context, ksmbd update old size to ->AllocationSize in smb2 create response. ksmbd_vfs_getattr() should be called after it to get updated stat result. Signed-off-by: Namjae Jeon Signed-off-by: Steve French --- fs/smb/server/smb2pdu.c | 36 ++++++++++++++++++------------------ 1 file changed, 18 insertions(+), 18 deletions(-) diff --git a/fs/smb/server/smb2pdu.c b/fs/smb/server/smb2pdu.c index f3af83dc49c4..652ab429bf2e 100644 --- a/fs/smb/server/smb2pdu.c +++ b/fs/smb/server/smb2pdu.c @@ -2516,7 +2516,7 @@ static void smb2_new_xattrs(struct ksmbd_tree_connect *tcon, const struct path * da.flags = XATTR_DOSINFO_ATTRIB | XATTR_DOSINFO_CREATE_TIME | XATTR_DOSINFO_ITIME; - rc = ksmbd_vfs_set_dos_attrib_xattr(mnt_idmap(path->mnt), path, &da, false); + rc = ksmbd_vfs_set_dos_attrib_xattr(mnt_idmap(path->mnt), path, &da, true); if (rc) ksmbd_debug(SMB, "failed to store file attribute into xattr\n"); } @@ -3185,23 +3185,6 @@ int smb2_open(struct ksmbd_work *work) goto err_out; } - rc = ksmbd_vfs_getattr(&path, &stat); - if (rc) - goto err_out; - - if (stat.result_mask & STATX_BTIME) - fp->create_time = ksmbd_UnixTimeToNT(stat.btime); - else - fp->create_time = ksmbd_UnixTimeToNT(stat.ctime); - if (req->FileAttributes || fp->f_ci->m_fattr == 0) - fp->f_ci->m_fattr = - cpu_to_le32(smb2_get_dos_mode(&stat, le32_to_cpu(req->FileAttributes))); - - if (!created) - smb2_update_xattrs(tcon, &path, fp); - else - smb2_new_xattrs(tcon, &path, fp); - if (file_present || created) ksmbd_vfs_kern_path_unlock(&parent_path, &path); @@ -3302,6 +3285,23 @@ int smb2_open(struct ksmbd_work *work) } } + rc = ksmbd_vfs_getattr(&path, &stat); + if (rc) + goto err_out1; + + if (stat.result_mask & STATX_BTIME) + fp->create_time = ksmbd_UnixTimeToNT(stat.btime); + else + fp->create_time = ksmbd_UnixTimeToNT(stat.ctime); + if (req->FileAttributes || fp->f_ci->m_fattr == 0) + fp->f_ci->m_fattr = + cpu_to_le32(smb2_get_dos_mode(&stat, le32_to_cpu(req->FileAttributes))); + + if (!created) + smb2_update_xattrs(tcon, &path, fp); + else + smb2_new_xattrs(tcon, &path, fp); + memcpy(fp->client_guid, conn->ClientGUID, SMB2_CLIENT_GUID_SIZE); rsp->StructureSize = cpu_to_le16(89); -- cgit v1.2.3 From 13736654481198e519059d4a2e2e3b20fa9fdb3e Mon Sep 17 00:00:00 2001 From: Namjae Jeon Date: Wed, 6 Dec 2023 08:23:49 +0900 Subject: ksmbd: fix wrong name of SMB2_CREATE_ALLOCATION_SIZE MS confirm that "AISi" name of SMB2_CREATE_ALLOCATION_SIZE in MS-SMB2 specification is a typo. cifs/ksmbd have been using this wrong name from MS-SMB2. It should be "AlSi". Also It will cause problem when running smb2.create.open test in smbtorture against ksmbd. Cc: stable@vger.kernel.org Fixes: 12197a7fdda9 ("Clarify SMB2/SMB3 create context and add missing ones") Signed-off-by: Namjae Jeon Reviewed-by: Paulo Alcantara (SUSE) Signed-off-by: Steve French --- fs/smb/common/smb2pdu.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/smb/common/smb2pdu.h b/fs/smb/common/smb2pdu.h index 8b603b13e372..57f2343164a3 100644 --- a/fs/smb/common/smb2pdu.h +++ b/fs/smb/common/smb2pdu.h @@ -1145,7 +1145,7 @@ struct smb2_server_client_notification { #define SMB2_CREATE_SD_BUFFER "SecD" /* security descriptor */ #define SMB2_CREATE_DURABLE_HANDLE_REQUEST "DHnQ" #define SMB2_CREATE_DURABLE_HANDLE_RECONNECT "DHnC" -#define SMB2_CREATE_ALLOCATION_SIZE "AISi" +#define SMB2_CREATE_ALLOCATION_SIZE "AlSi" #define SMB2_CREATE_QUERY_MAXIMAL_ACCESS_REQUEST "MxAc" #define SMB2_CREATE_TIMEWARP_REQUEST "TWrp" #define SMB2_CREATE_QUERY_ON_DISK_ID "QFid" -- cgit v1.2.3 From ef61a0405742a9f7f6051bc6fd2f017d87d07911 Mon Sep 17 00:00:00 2001 From: Jiaxun Yang Date: Fri, 1 Dec 2023 11:50:28 +0000 Subject: PCI: loongson: Limit MRRS to 256 This is a partial revert of 8b3517f88ff2 ("PCI: loongson: Prevent LS7A MRRS increases") for MIPS-based Loongson. Some MIPS Loongson systems don't support arbitrary Max_Read_Request_Size (MRRS) settings. 8b3517f88ff2 ("PCI: loongson: Prevent LS7A MRRS increases") worked around that by (1) assuming that firmware configured MRRS to the maximum supported value and (2) preventing the PCI core from increasing MRRS. Unfortunately, some firmware doesn't set that maximum MRRS correctly, which results in devices not being initialized correctly. One symptom, from the Debian report below, is this: ata4.00: exception Emask 0x0 SAct 0x20000000 SErr 0x0 action 0x6 frozen ata4.00: failed command: WRITE FPDMA QUEUED ata4.00: cmd 61/20:e8:00:f0:e1/00:00:00:00:00/40 tag 29 ncq dma 16384 out res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata4.00: status: { DRDY } ata4: hard resetting link Limit MRRS to 256 because MIPS Loongson with higher MRRS support is considered rare. This must be done at device enablement stage because the MRRS setting may get lost if PCI_COMMAND_MASTER on the parent bridge is cleared, and we are only sure parent bridge is enabled at this point. Fixes: 8b3517f88ff2 ("PCI: loongson: Prevent LS7A MRRS increases") Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217680 Link: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1035587 Link: https://lore.kernel.org/r/20231201115028.84351-1-jiaxun.yang@flygoat.com Signed-off-by: Jiaxun Yang Signed-off-by: Bjorn Helgaas Acked-by: Huacai Chen Cc: stable@vger.kernel.org --- drivers/pci/controller/pci-loongson.c | 46 +++++++++++++++++++++++++++++++---- 1 file changed, 41 insertions(+), 5 deletions(-) diff --git a/drivers/pci/controller/pci-loongson.c b/drivers/pci/controller/pci-loongson.c index d45e7b8dc530..8b34ccff073a 100644 --- a/drivers/pci/controller/pci-loongson.c +++ b/drivers/pci/controller/pci-loongson.c @@ -80,13 +80,49 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON, DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON, DEV_LS7A_LPC, system_bus_quirk); +/* + * Some Loongson PCIe ports have hardware limitations on their Maximum Read + * Request Size. They can't handle anything larger than this. Sane + * firmware will set proper MRRS at boot, so we only need no_inc_mrrs for + * bridges. However, some MIPS Loongson firmware doesn't set MRRS properly, + * so we have to enforce maximum safe MRRS, which is 256 bytes. + */ +#ifdef CONFIG_MIPS +static void loongson_set_min_mrrs_quirk(struct pci_dev *pdev) +{ + struct pci_bus *bus = pdev->bus; + struct pci_dev *bridge; + static const struct pci_device_id bridge_devids[] = { + { PCI_VDEVICE(LOONGSON, DEV_LS2K_PCIE_PORT0) }, + { PCI_VDEVICE(LOONGSON, DEV_LS7A_PCIE_PORT0) }, + { PCI_VDEVICE(LOONGSON, DEV_LS7A_PCIE_PORT1) }, + { PCI_VDEVICE(LOONGSON, DEV_LS7A_PCIE_PORT2) }, + { PCI_VDEVICE(LOONGSON, DEV_LS7A_PCIE_PORT3) }, + { PCI_VDEVICE(LOONGSON, DEV_LS7A_PCIE_PORT4) }, + { PCI_VDEVICE(LOONGSON, DEV_LS7A_PCIE_PORT5) }, + { PCI_VDEVICE(LOONGSON, DEV_LS7A_PCIE_PORT6) }, + { 0, }, + }; + + /* look for the matching bridge */ + while (!pci_is_root_bus(bus)) { + bridge = bus->self; + bus = bus->parent; + + if (pci_match_id(bridge_devids, bridge)) { + if (pcie_get_readrq(pdev) > 256) { + pci_info(pdev, "limiting MRRS to 256\n"); + pcie_set_readrq(pdev, 256); + } + break; + } + } +} +DECLARE_PCI_FIXUP_ENABLE(PCI_ANY_ID, PCI_ANY_ID, loongson_set_min_mrrs_quirk); +#endif + static void loongson_mrrs_quirk(struct pci_dev *pdev) { - /* - * Some Loongson PCIe ports have h/w limitations of maximum read - * request size. They can't handle anything larger than this. So - * force this limit on any devices attached under these ports. - */ struct pci_host_bridge *bridge = pci_find_host_bridge(pdev->bus); bridge->no_inc_mrrs = 1; -- cgit v1.2.3 From 4a073e813477be4ae95dfd23cb08baf36e93a29f Mon Sep 17 00:00:00 2001 From: angquan yu Date: Tue, 28 Nov 2023 16:11:05 -0600 Subject: KVM: selftests: Actually print out magic token in NX hugepages skip message MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Pass MAGIC_TOKEN to __TEST_REQUIRE() when printing the help message about needing to pass a magic value to manually run the NX hugepages test, otherwise the help message will contain garbage. In file included from x86_64/nx_huge_pages_test.c:15: x86_64/nx_huge_pages_test.c: In function ‘main’: include/test_util.h:40:32: error: format ‘%d’ expects a matching ‘int’ argument [-Werror=format=] 40 | ksft_exit_skip("- " fmt "\n", ##__VA_ARGS__); \ | ^~~~ x86_64/nx_huge_pages_test.c:259:9: note: in expansion of macro ‘__TEST_REQUIRE’ 259 | __TEST_REQUIRE(token == MAGIC_TOKEN, | ^~~~~~~~~~~~~~ Signed-off-by: angquan yu Link: https://lore.kernel.org/r/20231128221105.63093-1-angquan21@gmail.com [sean: rewrite shortlog+changelog] Signed-off-by: Sean Christopherson Signed-off-by: Paolo Bonzini --- tools/testing/selftests/kvm/x86_64/nx_huge_pages_test.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/kvm/x86_64/nx_huge_pages_test.c b/tools/testing/selftests/kvm/x86_64/nx_huge_pages_test.c index 18ac5c1952a3..83e25bccc139 100644 --- a/tools/testing/selftests/kvm/x86_64/nx_huge_pages_test.c +++ b/tools/testing/selftests/kvm/x86_64/nx_huge_pages_test.c @@ -259,7 +259,7 @@ int main(int argc, char **argv) __TEST_REQUIRE(token == MAGIC_TOKEN, "This test must be run with the magic token %d.\n" "This is done by nx_huge_pages_test.sh, which\n" - "also handles environment setup for the test."); + "also handles environment setup for the test.", MAGIC_TOKEN); run_test(reclaim_period_ms, false, reboot_permissions); run_test(reclaim_period_ms, true, reboot_permissions); -- cgit v1.2.3 From 96f124015f825a4a186b8497e20cf87f6519c7b4 Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Sat, 28 Oct 2023 20:34:53 +0100 Subject: KVM: selftests: add -MP to CFLAGS Using -MD without -MP causes build failures when a header file is deleted or moved. With -MP, the compiler will emit phony targets for the header files it lists as dependencies, and the Makefiles won't refuse to attempt to rebuild a C unit which no longer includes the deleted header. Signed-off-by: David Woodhouse Link: https://lore.kernel.org/r/9fc8b5395321abbfcaf5d78477a9a7cd350b08e4.camel@infradead.org Signed-off-by: Sean Christopherson Signed-off-by: Paolo Bonzini --- tools/testing/selftests/kvm/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/kvm/Makefile b/tools/testing/selftests/kvm/Makefile index 52c59bad7213..963435959a92 100644 --- a/tools/testing/selftests/kvm/Makefile +++ b/tools/testing/selftests/kvm/Makefile @@ -224,7 +224,7 @@ else LINUX_TOOL_ARCH_INCLUDE = $(top_srcdir)/tools/arch/$(ARCH)/include endif CFLAGS += -Wall -Wstrict-prototypes -Wuninitialized -O2 -g -std=gnu99 \ - -Wno-gnu-variable-sized-type-not-at-end -MD\ + -Wno-gnu-variable-sized-type-not-at-end -MD -MP \ -fno-builtin-memcmp -fno-builtin-memcpy -fno-builtin-memset \ -fno-builtin-strnlen \ -fno-stack-protector -fno-PIE -I$(LINUX_TOOL_INCLUDE) \ -- cgit v1.2.3 From 307004e8b254ad28e150b63f299ab9caa4bc7c3e Mon Sep 17 00:00:00 2001 From: Armin Wolf Date: Thu, 7 Dec 2023 22:07:23 +0100 Subject: hwmon: (corsair-psu) Fix probe when built-in It seems that when the driver is built-in, the HID bus is initialized after the driver is loaded, which whould cause module_hid_driver() to fail. Fix this by registering the driver after the HID bus using late_initcall() in accordance with other hwmon HID drivers. Signed-off-by: Armin Wolf Link: https://lore.kernel.org/r/20231207210723.222552-1-W_Armin@gmx.de [groeck: Dropped "compile tested" comment; the patch has been tested but the tester did not provide a Tested-by: tag] Signed-off-by: Guenter Roeck --- drivers/hwmon/corsair-psu.c | 18 +++++++++++++++++- 1 file changed, 17 insertions(+), 1 deletion(-) diff --git a/drivers/hwmon/corsair-psu.c b/drivers/hwmon/corsair-psu.c index 904890598c11..2c7c92272fe3 100644 --- a/drivers/hwmon/corsair-psu.c +++ b/drivers/hwmon/corsair-psu.c @@ -899,7 +899,23 @@ static struct hid_driver corsairpsu_driver = { .reset_resume = corsairpsu_resume, #endif }; -module_hid_driver(corsairpsu_driver); + +static int __init corsair_init(void) +{ + return hid_register_driver(&corsairpsu_driver); +} + +static void __exit corsair_exit(void) +{ + hid_unregister_driver(&corsairpsu_driver); +} + +/* + * With module_init() the driver would load before the HID bus when + * built-in, so use late_initcall() instead. + */ +late_initcall(corsair_init); +module_exit(corsair_exit); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Wilken Gottwalt "); -- cgit v1.2.3 From 4cdf351d3630a640ab6a05721ef055b9df62277f Mon Sep 17 00:00:00 2001 From: Sean Christopherson Date: Fri, 7 May 2021 09:59:46 -0700 Subject: KVM: SVM: Update EFER software model on CR0 trap for SEV-ES In general, activating long mode involves setting the EFER_LME bit in the EFER register and then enabling the X86_CR0_PG bit in the CR0 register. At this point, the EFER_LMA bit will be set automatically by hardware. In the case of SVM/SEV guests where writes to CR0 are intercepted, it's necessary for the host to set EFER_LMA on behalf of the guest since hardware does not see the actual CR0 write. In the case of SEV-ES guests where writes to CR0 are trapped instead of intercepted, the hardware *does* see/record the write to CR0 before exiting and passing the value on to the host, so as part of enabling SEV-ES support commit f1c6366e3043 ("KVM: SVM: Add required changes to support intercepts under SEV-ES") dropped special handling of the EFER_LMA bit with the understanding that it would be set automatically. However, since the guest never explicitly sets the EFER_LMA bit, the host never becomes aware that it has been set. This becomes problematic when userspace tries to get/set the EFER values via KVM_GET_SREGS/KVM_SET_SREGS, since the EFER contents tracked by the host will be missing the EFER_LMA bit, and when userspace attempts to pass the EFER value back via KVM_SET_SREGS it will fail a sanity check that asserts that EFER_LMA should always be set when X86_CR0_PG and EFER_LME are set. Fix this by always inferring the value of EFER_LMA based on X86_CR0_PG and EFER_LME, regardless of whether or not SEV-ES is enabled. Fixes: f1c6366e3043 ("KVM: SVM: Add required changes to support intercepts under SEV-ES") Reported-by: Peter Gonda Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson Message-Id: <20210507165947.2502412-2-seanjc@google.com> [A two year old patch that was revived after we noticed the failure in KVM_SET_SREGS and a similar patch was posted by Michael Roth. This is Sean's patch, but with Michael's more complete commit message. - Paolo] Signed-off-by: Paolo Bonzini --- arch/x86/kvm/svm/svm.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/arch/x86/kvm/svm/svm.c b/arch/x86/kvm/svm/svm.c index 712146312358..f3bb30b40876 100644 --- a/arch/x86/kvm/svm/svm.c +++ b/arch/x86/kvm/svm/svm.c @@ -1855,15 +1855,17 @@ void svm_set_cr0(struct kvm_vcpu *vcpu, unsigned long cr0) bool old_paging = is_paging(vcpu); #ifdef CONFIG_X86_64 - if (vcpu->arch.efer & EFER_LME && !vcpu->arch.guest_state_protected) { + if (vcpu->arch.efer & EFER_LME) { if (!is_paging(vcpu) && (cr0 & X86_CR0_PG)) { vcpu->arch.efer |= EFER_LMA; - svm->vmcb->save.efer |= EFER_LMA | EFER_LME; + if (!vcpu->arch.guest_state_protected) + svm->vmcb->save.efer |= EFER_LMA | EFER_LME; } if (is_paging(vcpu) && !(cr0 & X86_CR0_PG)) { vcpu->arch.efer &= ~EFER_LMA; - svm->vmcb->save.efer &= ~(EFER_LMA | EFER_LME); + if (!vcpu->arch.guest_state_protected) + svm->vmcb->save.efer &= ~(EFER_LMA | EFER_LME); } } #endif -- cgit v1.2.3 From c12296bbecc488623b7d1932080e394d08f3226b Mon Sep 17 00:00:00 2001 From: Florent Revest Date: Wed, 6 Dec 2023 13:37:18 +0100 Subject: team: Fix use-after-free when an option instance allocation fails In __team_options_register, team_options are allocated and appended to the team's option_list. If one option instance allocation fails, the "inst_rollback" cleanup path frees the previously allocated options but doesn't remove them from the team's option_list. This leaves dangling pointers that can be dereferenced later by other parts of the team driver that iterate over options. This patch fixes the cleanup path to remove the dangling pointers from the list. As far as I can tell, this uaf doesn't have much security implications since it would be fairly hard to exploit (an attacker would need to make the allocation of that specific small object fail) but it's still nice to fix. Cc: stable@vger.kernel.org Fixes: 80f7c6683fe0 ("team: add support for per-port options") Signed-off-by: Florent Revest Reviewed-by: Jiri Pirko Reviewed-by: Hangbin Liu Link: https://lore.kernel.org/r/20231206123719.1963153-1-revest@chromium.org Signed-off-by: Jakub Kicinski --- drivers/net/team/team.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/net/team/team.c b/drivers/net/team/team.c index 508d9a392ab1..f575f225d417 100644 --- a/drivers/net/team/team.c +++ b/drivers/net/team/team.c @@ -281,8 +281,10 @@ static int __team_options_register(struct team *team, return 0; inst_rollback: - for (i--; i >= 0; i--) + for (i--; i >= 0; i--) { __team_option_inst_del_option(team, dst_opts[i]); + list_del(&dst_opts[i]->list); + } i = option_count; alloc_rollback: -- cgit v1.2.3 From a1664b991ac12b872be859ca03529c68c72795a2 Mon Sep 17 00:00:00 2001 From: Shinas Rasheed Date: Wed, 6 Dec 2023 05:52:27 -0800 Subject: octeon_ep: initialise control mbox tasks before using APIs Initialise various workqueue tasks and queue interrupt poll task before the first invocation of any control net APIs. Since octep_ctrl_net_get_info was called before the control net receive work task was initialised or even the interrupt poll task was queued, the function call wasn't returning actual firmware info queried from Octeon. Fixes: 8d6198a14e2b ("octeon_ep: support to fetch firmware info") Signed-off-by: Shinas Rasheed Reviewed-by: Michal Schmidt Link: https://lore.kernel.org/r/20231206135228.2591659-1-srasheed@marvell.com Signed-off-by: Jakub Kicinski --- .../net/ethernet/marvell/octeon_ep/octep_main.c | 22 +++++++++++++--------- 1 file changed, 13 insertions(+), 9 deletions(-) diff --git a/drivers/net/ethernet/marvell/octeon_ep/octep_main.c b/drivers/net/ethernet/marvell/octeon_ep/octep_main.c index 552970c7dec0..a2b5a3f8df93 100644 --- a/drivers/net/ethernet/marvell/octeon_ep/octep_main.c +++ b/drivers/net/ethernet/marvell/octeon_ep/octep_main.c @@ -1193,6 +1193,13 @@ int octep_device_setup(struct octep_device *oct) if (ret) return ret; + INIT_WORK(&oct->tx_timeout_task, octep_tx_timeout_task); + INIT_WORK(&oct->ctrl_mbox_task, octep_ctrl_mbox_task); + INIT_DELAYED_WORK(&oct->intr_poll_task, octep_intr_poll_task); + oct->poll_non_ioq_intr = true; + queue_delayed_work(octep_wq, &oct->intr_poll_task, + msecs_to_jiffies(OCTEP_INTR_POLL_TIME_MSECS)); + atomic_set(&oct->hb_miss_cnt, 0); INIT_DELAYED_WORK(&oct->hb_task, octep_hb_timeout_task); @@ -1325,21 +1332,18 @@ static int octep_probe(struct pci_dev *pdev, const struct pci_device_id *ent) goto err_octep_config; } - octep_ctrl_net_get_info(octep_dev, OCTEP_CTRL_NET_INVALID_VFID, - &octep_dev->conf->fw_info); + err = octep_ctrl_net_get_info(octep_dev, OCTEP_CTRL_NET_INVALID_VFID, + &octep_dev->conf->fw_info); + if (err) { + dev_err(&pdev->dev, "Failed to get firmware info\n"); + goto register_dev_err; + } dev_info(&octep_dev->pdev->dev, "Heartbeat interval %u msecs Heartbeat miss count %u\n", octep_dev->conf->fw_info.hb_interval, octep_dev->conf->fw_info.hb_miss_count); queue_delayed_work(octep_wq, &octep_dev->hb_task, msecs_to_jiffies(octep_dev->conf->fw_info.hb_interval)); - INIT_WORK(&octep_dev->tx_timeout_task, octep_tx_timeout_task); - INIT_WORK(&octep_dev->ctrl_mbox_task, octep_ctrl_mbox_task); - INIT_DELAYED_WORK(&octep_dev->intr_poll_task, octep_intr_poll_task); - octep_dev->poll_non_ioq_intr = true; - queue_delayed_work(octep_wq, &octep_dev->intr_poll_task, - msecs_to_jiffies(OCTEP_INTR_POLL_TIME_MSECS)); - netdev->netdev_ops = &octep_netdev_ops; octep_set_ethtool_ops(netdev); netif_carrier_off(netdev); -- cgit v1.2.3 From f4e6064c97c050bd9904925ff7d53d0c9954fc7b Mon Sep 17 00:00:00 2001 From: Stefan Wahren Date: Wed, 6 Dec 2023 15:12:20 +0100 Subject: qca_debug: Prevent crash on TX ring changes The qca_spi driver stop and restart the SPI kernel thread (via ndo_stop & ndo_open) in case of TX ring changes. This is a big issue because it allows userspace to prevent restart of the SPI kernel thread (via signals). A subsequent change of TX ring wrongly assume a valid spi_thread pointer which result in a crash. So prevent this by stopping the network traffic handling and temporary park the SPI thread. Fixes: 291ab06ecf67 ("net: qualcomm: new Ethernet over SPI driver for QCA7000") Signed-off-by: Stefan Wahren Link: https://lore.kernel.org/r/20231206141222.52029-2-wahrenst@gmx.net Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/qualcomm/qca_debug.c | 9 ++++----- drivers/net/ethernet/qualcomm/qca_spi.c | 12 ++++++++++++ 2 files changed, 16 insertions(+), 5 deletions(-) diff --git a/drivers/net/ethernet/qualcomm/qca_debug.c b/drivers/net/ethernet/qualcomm/qca_debug.c index 6f2fa2a42770..a5445252b0c4 100644 --- a/drivers/net/ethernet/qualcomm/qca_debug.c +++ b/drivers/net/ethernet/qualcomm/qca_debug.c @@ -263,7 +263,6 @@ qcaspi_set_ringparam(struct net_device *dev, struct ethtool_ringparam *ring, struct kernel_ethtool_ringparam *kernel_ring, struct netlink_ext_ack *extack) { - const struct net_device_ops *ops = dev->netdev_ops; struct qcaspi *qca = netdev_priv(dev); if ((ring->rx_pending) || @@ -271,14 +270,14 @@ qcaspi_set_ringparam(struct net_device *dev, struct ethtool_ringparam *ring, (ring->rx_jumbo_pending)) return -EINVAL; - if (netif_running(dev)) - ops->ndo_stop(dev); + if (qca->spi_thread) + kthread_park(qca->spi_thread); qca->txr.count = max_t(u32, ring->tx_pending, TX_RING_MIN_LEN); qca->txr.count = min_t(u16, qca->txr.count, TX_RING_MAX_LEN); - if (netif_running(dev)) - ops->ndo_open(dev); + if (qca->spi_thread) + kthread_unpark(qca->spi_thread); return 0; } diff --git a/drivers/net/ethernet/qualcomm/qca_spi.c b/drivers/net/ethernet/qualcomm/qca_spi.c index bec723028e96..b0fad69bb755 100644 --- a/drivers/net/ethernet/qualcomm/qca_spi.c +++ b/drivers/net/ethernet/qualcomm/qca_spi.c @@ -580,6 +580,18 @@ qcaspi_spi_thread(void *data) netdev_info(qca->net_dev, "SPI thread created\n"); while (!kthread_should_stop()) { set_current_state(TASK_INTERRUPTIBLE); + if (kthread_should_park()) { + netif_tx_disable(qca->net_dev); + netif_carrier_off(qca->net_dev); + qcaspi_flush_tx_ring(qca); + kthread_parkme(); + if (qca->sync == QCASPI_SYNC_READY) { + netif_carrier_on(qca->net_dev); + netif_wake_queue(qca->net_dev); + } + continue; + } + if ((qca->intr_req == qca->intr_svc) && !qca->txr.skb[qca->txr.head]) schedule(); -- cgit v1.2.3 From 96a7e861d9e04d07febd3011c30cd84cd141d81f Mon Sep 17 00:00:00 2001 From: Stefan Wahren Date: Wed, 6 Dec 2023 15:12:21 +0100 Subject: qca_debug: Fix ethtool -G iface tx behavior After calling ethtool -g it was not possible to adjust the TX ring size again: # ethtool -g eth1 Ring parameters for eth1: Pre-set maximums: RX: 4 RX Mini: n/a RX Jumbo: n/a TX: 10 Current hardware settings: RX: 4 RX Mini: n/a RX Jumbo: n/a TX: 10 # ethtool -G eth1 tx 8 netlink error: Invalid argument The reason for this is that the readonly setting rx_pending get initialized and after that the range check in qcaspi_set_ringparam() fails regardless of the provided parameter. So fix this by accepting the exposed RX defaults. Instead of adding another magic number better use a new define here. Fixes: 291ab06ecf67 ("net: qualcomm: new Ethernet over SPI driver for QCA7000") Suggested-by: Paolo Abeni Signed-off-by: Stefan Wahren Link: https://lore.kernel.org/r/20231206141222.52029-3-wahrenst@gmx.net Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/qualcomm/qca_debug.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/net/ethernet/qualcomm/qca_debug.c b/drivers/net/ethernet/qualcomm/qca_debug.c index a5445252b0c4..1822f2ad8f0d 100644 --- a/drivers/net/ethernet/qualcomm/qca_debug.c +++ b/drivers/net/ethernet/qualcomm/qca_debug.c @@ -30,6 +30,8 @@ #define QCASPI_MAX_REGS 0x20 +#define QCASPI_RX_MAX_FRAMES 4 + static const u16 qcaspi_spi_regs[] = { SPI_REG_BFR_SIZE, SPI_REG_WRBUF_SPC_AVA, @@ -252,9 +254,9 @@ qcaspi_get_ringparam(struct net_device *dev, struct ethtool_ringparam *ring, { struct qcaspi *qca = netdev_priv(dev); - ring->rx_max_pending = 4; + ring->rx_max_pending = QCASPI_RX_MAX_FRAMES; ring->tx_max_pending = TX_RING_MAX_LEN; - ring->rx_pending = 4; + ring->rx_pending = QCASPI_RX_MAX_FRAMES; ring->tx_pending = qca->txr.count; } @@ -265,7 +267,7 @@ qcaspi_set_ringparam(struct net_device *dev, struct ethtool_ringparam *ring, { struct qcaspi *qca = netdev_priv(dev); - if ((ring->rx_pending) || + if (ring->rx_pending != QCASPI_RX_MAX_FRAMES || (ring->rx_mini_pending) || (ring->rx_jumbo_pending)) return -EINVAL; -- cgit v1.2.3 From 1057812d146dd658c9a9a96d869c2551150207b5 Mon Sep 17 00:00:00 2001 From: Stefan Wahren Date: Wed, 6 Dec 2023 15:12:22 +0100 Subject: qca_spi: Fix reset behavior In case of a reset triggered by the QCA7000 itself, the behavior of the qca_spi driver was not quite correct: - in case of a pending RX frame decoding the drop counter must be incremented and decoding state machine reseted - also the reset counter must always be incremented regardless of sync state Fixes: 291ab06ecf67 ("net: qualcomm: new Ethernet over SPI driver for QCA7000") Signed-off-by: Stefan Wahren Link: https://lore.kernel.org/r/20231206141222.52029-4-wahrenst@gmx.net Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/qualcomm/qca_spi.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/qualcomm/qca_spi.c b/drivers/net/ethernet/qualcomm/qca_spi.c index b0fad69bb755..5f3c11fb3fa2 100644 --- a/drivers/net/ethernet/qualcomm/qca_spi.c +++ b/drivers/net/ethernet/qualcomm/qca_spi.c @@ -620,11 +620,17 @@ qcaspi_spi_thread(void *data) if (intr_cause & SPI_INT_CPU_ON) { qcaspi_qca7k_sync(qca, QCASPI_EVENT_CPUON); + /* Frame decoding in progress */ + if (qca->frm_handle.state != qca->frm_handle.init) + qca->net_dev->stats.rx_dropped++; + + qcafrm_fsm_init_spi(&qca->frm_handle); + qca->stats.device_reset++; + /* not synced. */ if (qca->sync != QCASPI_SYNC_READY) continue; - qca->stats.device_reset++; netif_wake_queue(qca->net_dev); netif_carrier_on(qca->net_dev); } -- cgit v1.2.3 From c65efe3685f5d150eeca5599afeabdc85da899d1 Mon Sep 17 00:00:00 2001 From: Ira Weiny Date: Thu, 16 Nov 2023 16:03:29 -0800 Subject: cxl/cdat: Free correct buffer on checksum error The new 6.7-rc1 kernel now checks the checksum on CDAT data. While using a branch of Fan's DCD qemu work (and specifying DCD devices), the following splat was observed. WARNING: CPU: 1 PID: 1384 at drivers/base/devres.c:1064 devm_kfree+0x4f/0x60 ... RIP: 0010:devm_kfree+0x4f/0x60 ... ? devm_kfree+0x4f/0x60 read_cdat_data+0x1a0/0x2a0 [cxl_core] cxl_port_probe+0xdf/0x200 [cxl_port] ... The issue in qemu is still unknown but the spat is a straight forward bug in the CDAT checksum processing code. Use a CDAT buffer variable to ensure the devm_free() works correctly on error. Fixes: 670e4e88f3b1 ("cxl: Add checksum verification to CDAT from CXL") Signed-off-by: Ira Weiny Reviewed-by: Dave Jiang Reviewed-by: Fan Ni Reviewed-by: Robert Richter Link: http://lore.kernel.org/r/20231116-fix-cdat-devm-free-v1-1-b148b40707d7@intel.com Signed-off-by: Dan Williams --- drivers/cxl/core/pci.c | 13 ++++++------- 1 file changed, 6 insertions(+), 7 deletions(-) diff --git a/drivers/cxl/core/pci.c b/drivers/cxl/core/pci.c index eff20e83d0a6..37e1652afbc7 100644 --- a/drivers/cxl/core/pci.c +++ b/drivers/cxl/core/pci.c @@ -620,7 +620,7 @@ void read_cdat_data(struct cxl_port *port) struct pci_dev *pdev = NULL; struct cxl_memdev *cxlmd; size_t cdat_length; - void *cdat_table; + void *cdat_table, *cdat_buf; int rc; if (is_cxl_memdev(uport)) { @@ -651,16 +651,15 @@ void read_cdat_data(struct cxl_port *port) return; } - cdat_table = devm_kzalloc(dev, cdat_length + sizeof(__le32), - GFP_KERNEL); - if (!cdat_table) + cdat_buf = devm_kzalloc(dev, cdat_length + sizeof(__le32), GFP_KERNEL); + if (!cdat_buf) return; - rc = cxl_cdat_read_table(dev, cdat_doe, cdat_table, &cdat_length); + rc = cxl_cdat_read_table(dev, cdat_doe, cdat_buf, &cdat_length); if (rc) goto err; - cdat_table = cdat_table + sizeof(__le32); + cdat_table = cdat_buf + sizeof(__le32); if (cdat_checksum(cdat_table, cdat_length)) goto err; @@ -670,7 +669,7 @@ void read_cdat_data(struct cxl_port *port) err: /* Don't leave table data allocated on error */ - devm_kfree(dev, cdat_table); + devm_kfree(dev, cdat_buf); dev_err(dev, "Failed to read/validate CDAT.\n"); } EXPORT_SYMBOL_NS_GPL(read_cdat_data, CXL); -- cgit v1.2.3 From a45f1e46274256852990c479fbb1198a7d84529b Mon Sep 17 00:00:00 2001 From: Karsten Graul Date: Thu, 7 Dec 2023 21:23:58 +0100 Subject: MAINTAINERS: remove myself as maintainer of SMC I changed responsibilities some time ago, its time to remove myself as maintainer of the SMC component. Signed-off-by: Karsten Graul Signed-off-by: Wenjia Zhang Link: https://lore.kernel.org/r/20231207202358.53502-1-wenjia@linux.ibm.com Signed-off-by: Jakub Kicinski --- MAINTAINERS | 1 - 1 file changed, 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index a0fb0df07b43..c17c66810598 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -19638,7 +19638,6 @@ S: Maintained F: drivers/misc/sgi-xp/ SHARED MEMORY COMMUNICATIONS (SMC) SOCKETS -M: Karsten Graul M: Wenjia Zhang M: Jan Karcher R: D. Wythe -- cgit v1.2.3 From 9c25aae0132b8babbe71ebb2160186d69231d9b3 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Thu, 7 Dec 2023 18:13:42 +0000 Subject: tcp: fix tcp_disordered_ack() vs usec TS resolution After commit 939463016b7a ("tcp: change data receiver flowlabel after one dup") we noticed an increase of TCPACKSkippedPAWS events. Neal Cardwell tracked the issue to tcp_disordered_ack() assumption about remote peer TS clock. RFC 1323 & 7323 are suggesting the following: "timestamp clock frequency in the range 1 ms to 1 sec per tick between 1ms and 1sec." This has to be adjusted for 1 MHz clock frequency. This hints at reorders of SACK packets on send side, this might deserve a future patch. (skb->ooo_okay is always set for pure ACK packets) Fixes: 614e8316aa4c ("tcp: add support for usec resolution in TCP TS values") Co-developed-by: Neal Cardwell Signed-off-by: Neal Cardwell Signed-off-by: Eric Dumazet Cc: David Morley Link: https://lore.kernel.org/r/20231207181342.525181-1-edumazet@google.com Signed-off-by: Jakub Kicinski --- net/ipv4/tcp_input.c | 22 ++++++++++++++++++++-- 1 file changed, 20 insertions(+), 2 deletions(-) diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c index 90de838a2745..701cb87043f2 100644 --- a/net/ipv4/tcp_input.c +++ b/net/ipv4/tcp_input.c @@ -4368,6 +4368,23 @@ EXPORT_SYMBOL(tcp_do_parse_auth_options); * up to bandwidth of 18Gigabit/sec. 8) ] */ +/* Estimates max number of increments of remote peer TSval in + * a replay window (based on our current RTO estimation). + */ +static u32 tcp_tsval_replay(const struct sock *sk) +{ + /* If we use usec TS resolution, + * then expect the remote peer to use the same resolution. + */ + if (tcp_sk(sk)->tcp_usec_ts) + return inet_csk(sk)->icsk_rto * (USEC_PER_SEC / HZ); + + /* RFC 7323 recommends a TSval clock between 1ms and 1sec. + * We know that some OS (including old linux) can use 1200 Hz. + */ + return inet_csk(sk)->icsk_rto * 1200 / HZ; +} + static int tcp_disordered_ack(const struct sock *sk, const struct sk_buff *skb) { const struct tcp_sock *tp = tcp_sk(sk); @@ -4375,7 +4392,7 @@ static int tcp_disordered_ack(const struct sock *sk, const struct sk_buff *skb) u32 seq = TCP_SKB_CB(skb)->seq; u32 ack = TCP_SKB_CB(skb)->ack_seq; - return (/* 1. Pure ACK with correct sequence number. */ + return /* 1. Pure ACK with correct sequence number. */ (th->ack && seq == TCP_SKB_CB(skb)->end_seq && seq == tp->rcv_nxt) && /* 2. ... and duplicate ACK. */ @@ -4385,7 +4402,8 @@ static int tcp_disordered_ack(const struct sock *sk, const struct sk_buff *skb) !tcp_may_update_window(tp, ack, seq, ntohs(th->window) << tp->rx_opt.snd_wscale) && /* 4. ... and sits in replay window. */ - (s32)(tp->rx_opt.ts_recent - tp->rx_opt.rcv_tsval) <= (inet_csk(sk)->icsk_rto * 1024) / HZ); + (s32)(tp->rx_opt.ts_recent - tp->rx_opt.rcv_tsval) <= + tcp_tsval_replay(sk); } static inline bool tcp_paws_discard(const struct sock *sk, -- cgit v1.2.3 From 9ef7c58f5abe41e6d91f37f28fe2d851ffedd92a Mon Sep 17 00:00:00 2001 From: Somnath Kotur Date: Thu, 7 Dec 2023 16:16:55 -0800 Subject: bnxt_en: Clear resource reservation during resume We are issuing HWRM_FUNC_RESET cmd to reset the device including all reserved resources, but not clearing the reservations within the driver struct. As a result, when the driver re-initializes as part of resume, it believes that there is no need to do any resource reservation and goes ahead and tries to allocate rings which will eventually fail beyond a certain number pre-reserved by the firmware. Fixes: 674f50a5b026 ("bnxt_en: Implement new method to reserve rings.") Reviewed-by: Kalesh AP Reviewed-by: Ajit Khaparde Reviewed-by: Andy Gospodarek Signed-off-by: Somnath Kotur Signed-off-by: Michael Chan Link: https://lore.kernel.org/r/20231208001658.14230-2-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/broadcom/bnxt/bnxt.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c index d0359b569afe..72f2fc983940 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c @@ -13940,6 +13940,8 @@ static int bnxt_resume(struct device *device) if (rc) goto resume_exit; + bnxt_clear_reservations(bp, true); + if (bnxt_hwrm_func_drv_rgtr(bp, NULL, 0, false)) { rc = -ENODEV; goto resume_exit; -- cgit v1.2.3 From aded5d1feb08e48d544845d3594d70c4d5fe6e54 Mon Sep 17 00:00:00 2001 From: Sreekanth Reddy Date: Thu, 7 Dec 2023 16:16:56 -0800 Subject: bnxt_en: Fix skb recycling logic in bnxt_deliver_skb() Receive SKBs can go through the VF-rep path or the normal path. skb_mark_for_recycle() is only called for the normal path. Fix it to do it for both paths to fix possible stalled page pool shutdown errors. Fixes: 86b05508f775 ("bnxt_en: Use the unified RX page pool buffers for XDP and non-XDP") Reviewed-by: Somnath Kotur Reviewed-by: Andy Gospodarek Reviewed-by: Vikas Gupta Signed-off-by: Sreekanth Reddy Signed-off-by: Michael Chan Link: https://lore.kernel.org/r/20231208001658.14230-3-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/broadcom/bnxt/bnxt.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c index 72f2fc983940..b4a5311bdeb5 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c @@ -1748,13 +1748,14 @@ static void bnxt_tpa_agg(struct bnxt *bp, struct bnxt_rx_ring_info *rxr, static void bnxt_deliver_skb(struct bnxt *bp, struct bnxt_napi *bnapi, struct sk_buff *skb) { + skb_mark_for_recycle(skb); + if (skb->dev != bp->dev) { /* this packet belongs to a vf-rep */ bnxt_vf_rep_rx(bp, skb); return; } skb_record_rx_queue(skb, bnapi->index); - skb_mark_for_recycle(skb); napi_gro_receive(&bnapi->napi, skb); } -- cgit v1.2.3 From bd6781c18cb5b5e5d8c5873fa9a51668e89ec76e Mon Sep 17 00:00:00 2001 From: Kalesh AP Date: Thu, 7 Dec 2023 16:16:57 -0800 Subject: bnxt_en: Fix wrong return value check in bnxt_close_nic() The wait_event_interruptible_timeout() function returns 0 if the timeout elapsed, -ERESTARTSYS if it was interrupted by a signal, and the remaining jiffies otherwise if the condition evaluated to true before the timeout elapsed. Driver should have checked for zero return value instead of a positive value. MChan: Print a warning for -ERESTARTSYS. The close operation will proceed anyway when wait_event_interruptible_timeout() returns for any reason. Since we do the close no matter what, we should not return this error code to the caller. Change bnxt_close_nic() to a void function and remove all error handling from some of the callers. Fixes: c0c050c58d84 ("bnxt_en: New Broadcom ethernet driver.") Reviewed-by: Andy Gospodarek Reviewed-by: Vikas Gupta Reviewed-by: Somnath Kotur Signed-off-by: Kalesh AP Signed-off-by: Michael Chan Link: https://lore.kernel.org/r/20231208001658.14230-4-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/broadcom/bnxt/bnxt.c | 13 +++++++------ drivers/net/ethernet/broadcom/bnxt/bnxt.h | 2 +- drivers/net/ethernet/broadcom/bnxt/bnxt_devlink.c | 11 ++--------- drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c | 19 ++++--------------- drivers/net/ethernet/broadcom/bnxt/bnxt_ptp.c | 5 ++--- 5 files changed, 16 insertions(+), 34 deletions(-) diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c index b4a5311bdeb5..aa1f5b776b5a 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c @@ -10732,10 +10732,8 @@ static void __bnxt_close_nic(struct bnxt *bp, bool irq_re_init, bnxt_free_mem(bp, irq_re_init); } -int bnxt_close_nic(struct bnxt *bp, bool irq_re_init, bool link_re_init) +void bnxt_close_nic(struct bnxt *bp, bool irq_re_init, bool link_re_init) { - int rc = 0; - if (test_bit(BNXT_STATE_IN_FW_RESET, &bp->state)) { /* If we get here, it means firmware reset is in progress * while we are trying to close. We can safely proceed with @@ -10750,15 +10748,18 @@ int bnxt_close_nic(struct bnxt *bp, bool irq_re_init, bool link_re_init) #ifdef CONFIG_BNXT_SRIOV if (bp->sriov_cfg) { + int rc; + rc = wait_event_interruptible_timeout(bp->sriov_cfg_wait, !bp->sriov_cfg, BNXT_SRIOV_CFG_WAIT_TMO); - if (rc) - netdev_warn(bp->dev, "timeout waiting for SRIOV config operation to complete!\n"); + if (!rc) + netdev_warn(bp->dev, "timeout waiting for SRIOV config operation to complete, proceeding to close!\n"); + else if (rc < 0) + netdev_warn(bp->dev, "SRIOV config operation interrupted, proceeding to close!\n"); } #endif __bnxt_close_nic(bp, irq_re_init, link_re_init); - return rc; } static int bnxt_close(struct net_device *dev) diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.h b/drivers/net/ethernet/broadcom/bnxt/bnxt.h index e702dbc3e6b1..0488b0466015 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt.h +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.h @@ -2375,7 +2375,7 @@ int bnxt_open_nic(struct bnxt *, bool, bool); int bnxt_half_open_nic(struct bnxt *bp); void bnxt_half_close_nic(struct bnxt *bp); void bnxt_reenable_sriov(struct bnxt *bp); -int bnxt_close_nic(struct bnxt *, bool, bool); +void bnxt_close_nic(struct bnxt *, bool, bool); void bnxt_get_ring_err_stats(struct bnxt *bp, struct bnxt_total_ring_err_stats *stats); int bnxt_dbg_hwrm_rd_reg(struct bnxt *bp, u32 reg_off, u16 num_words, diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_devlink.c b/drivers/net/ethernet/broadcom/bnxt/bnxt_devlink.c index f302dac56599..89809f1b129c 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt_devlink.c +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_devlink.c @@ -449,15 +449,8 @@ static int bnxt_dl_reload_down(struct devlink *dl, bool netns_change, return -ENODEV; } bnxt_ulp_stop(bp); - if (netif_running(bp->dev)) { - rc = bnxt_close_nic(bp, true, true); - if (rc) { - NL_SET_ERR_MSG_MOD(extack, "Failed to close"); - dev_close(bp->dev); - rtnl_unlock(); - break; - } - } + if (netif_running(bp->dev)) + bnxt_close_nic(bp, true, true); bnxt_vf_reps_free(bp); rc = bnxt_hwrm_func_drv_unrgtr(bp); if (rc) { diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c b/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c index f3f384773ac0..5f67a7f94e7d 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c @@ -165,9 +165,8 @@ static int bnxt_set_coalesce(struct net_device *dev, reset_coalesce: if (test_bit(BNXT_STATE_OPEN, &bp->state)) { if (update_stats) { - rc = bnxt_close_nic(bp, true, false); - if (!rc) - rc = bnxt_open_nic(bp, true, false); + bnxt_close_nic(bp, true, false); + rc = bnxt_open_nic(bp, true, false); } else { rc = bnxt_hwrm_set_coal(bp); } @@ -972,12 +971,7 @@ static int bnxt_set_channels(struct net_device *dev, * before PF unload */ } - rc = bnxt_close_nic(bp, true, false); - if (rc) { - netdev_err(bp->dev, "Set channel failure rc :%x\n", - rc); - return rc; - } + bnxt_close_nic(bp, true, false); } if (sh) { @@ -4042,12 +4036,7 @@ static void bnxt_self_test(struct net_device *dev, struct ethtool_test *etest, bnxt_run_fw_tests(bp, test_mask, &test_results); } else { bnxt_ulp_stop(bp); - rc = bnxt_close_nic(bp, true, false); - if (rc) { - etest->flags |= ETH_TEST_FL_FAILED; - bnxt_ulp_start(bp, rc); - return; - } + bnxt_close_nic(bp, true, false); bnxt_run_fw_tests(bp, test_mask, &test_results); buf[BNXT_MACLPBK_TEST_IDX] = 1; diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_ptp.c b/drivers/net/ethernet/broadcom/bnxt/bnxt_ptp.c index f3886710e778..6e3da3362bd6 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt_ptp.c +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_ptp.c @@ -521,9 +521,8 @@ static int bnxt_hwrm_ptp_cfg(struct bnxt *bp) if (netif_running(bp->dev)) { if (ptp->rx_filter == HWTSTAMP_FILTER_ALL) { - rc = bnxt_close_nic(bp, false, false); - if (!rc) - rc = bnxt_open_nic(bp, false, false); + bnxt_close_nic(bp, false, false); + rc = bnxt_open_nic(bp, false, false); } else { bnxt_ptp_cfg_tstamp_filters(bp); } -- cgit v1.2.3 From c13e268c0768659cdaae4bfe2fb24860bcc8ddb4 Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Thu, 7 Dec 2023 16:16:58 -0800 Subject: bnxt_en: Fix HWTSTAMP_FILTER_ALL packet timestamp logic When the chip is configured to timestamp all receive packets, the timestamp in the RX completion is only valid if the metadata present flag is not set for packets received on the wire. In addition, internal loopback packets will never have a valid timestamp and the timestamp field will always be zero. We must exclude any 0 value in the timestamp field because there is no way to determine if it is a loopback packet or not. Add a new function bnxt_rx_ts_valid() to check for all timestamp valid conditions. Fixes: 66ed81dcedc6 ("bnxt_en: Enable packet timestamping for all RX packets") Reviewed-by: Andy Gospodarek Reviewed-by: Pavan Chebbi Signed-off-by: Michael Chan Link: https://lore.kernel.org/r/20231208001658.14230-5-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/broadcom/bnxt/bnxt.c | 20 +++++++++++++++++--- drivers/net/ethernet/broadcom/bnxt/bnxt.h | 8 +++++++- 2 files changed, 24 insertions(+), 4 deletions(-) diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c index aa1f5b776b5a..579eebb6fc56 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c @@ -1759,6 +1759,21 @@ static void bnxt_deliver_skb(struct bnxt *bp, struct bnxt_napi *bnapi, napi_gro_receive(&bnapi->napi, skb); } +static bool bnxt_rx_ts_valid(struct bnxt *bp, u32 flags, + struct rx_cmp_ext *rxcmp1, u32 *cmpl_ts) +{ + u32 ts = le32_to_cpu(rxcmp1->rx_cmp_timestamp); + + if (BNXT_PTP_RX_TS_VALID(flags)) + goto ts_valid; + if (!bp->ptp_all_rx_tstamp || !ts || !BNXT_ALL_RX_TS_VALID(flags)) + return false; + +ts_valid: + *cmpl_ts = ts; + return true; +} + /* returns the following: * 1 - 1 packet successfully received * 0 - successful TPA_START, packet not completed yet @@ -1784,6 +1799,7 @@ static int bnxt_rx_pkt(struct bnxt *bp, struct bnxt_cp_ring_info *cpr, struct sk_buff *skb; struct xdp_buff xdp; u32 flags, misc; + u32 cmpl_ts; void *data; int rc = 0; @@ -2006,10 +2022,8 @@ static int bnxt_rx_pkt(struct bnxt *bp, struct bnxt_cp_ring_info *cpr, } } - if (unlikely((flags & RX_CMP_FLAGS_ITYPES_MASK) == - RX_CMP_FLAGS_ITYPE_PTP_W_TS) || bp->ptp_all_rx_tstamp) { + if (bnxt_rx_ts_valid(bp, flags, rxcmp1, &cmpl_ts)) { if (bp->flags & BNXT_FLAG_CHIP_P5) { - u32 cmpl_ts = le32_to_cpu(rxcmp1->rx_cmp_timestamp); u64 ns, ts; if (!bnxt_get_rx_ts_p5(bp, &ts, cmpl_ts)) { diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.h b/drivers/net/ethernet/broadcom/bnxt/bnxt.h index 0488b0466015..a7d7b09ea162 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt.h +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.h @@ -161,7 +161,7 @@ struct rx_cmp { #define RX_CMP_FLAGS_ERROR (1 << 6) #define RX_CMP_FLAGS_PLACEMENT (7 << 7) #define RX_CMP_FLAGS_RSS_VALID (1 << 10) - #define RX_CMP_FLAGS_UNUSED (1 << 11) + #define RX_CMP_FLAGS_PKT_METADATA_PRESENT (1 << 11) #define RX_CMP_FLAGS_ITYPES_SHIFT 12 #define RX_CMP_FLAGS_ITYPES_MASK 0xf000 #define RX_CMP_FLAGS_ITYPE_UNKNOWN (0 << 12) @@ -188,6 +188,12 @@ struct rx_cmp { __le32 rx_cmp_rss_hash; }; +#define BNXT_PTP_RX_TS_VALID(flags) \ + (((flags) & RX_CMP_FLAGS_ITYPES_MASK) == RX_CMP_FLAGS_ITYPE_PTP_W_TS) + +#define BNXT_ALL_RX_TS_VALID(flags) \ + !((flags) & RX_CMP_FLAGS_PKT_METADATA_PRESENT) + #define RX_CMP_HASH_VALID(rxcmp) \ ((rxcmp)->rx_cmp_len_flags_type & cpu_to_le32(RX_CMP_FLAGS_RSS_VALID)) -- cgit v1.2.3 From eea673e9d5ea994c60b550ffb684413d3759b3f4 Mon Sep 17 00:00:00 2001 From: WANG Rui Date: Sat, 9 Dec 2023 15:49:15 +0800 Subject: LoongArch: Apply dynamic relocations for LLD For the following assembly code: .text .global func func: nop .data var: .dword func When linked with `-pie`, GNU LD populates the `var` variable with the pre-relocated value of `func`. However, LLVM LLD does not exhibit the same behavior. This issue also arises with the `kernel_entry` in arch/ loongarch/kernel/head.S: _head: .word MZ_MAGIC /* "MZ", MS-DOS header */ .org 0x8 .dword kernel_entry /* Kernel entry point */ The correct kernel entry from the MS-DOS header is crucial for jumping to vmlinux from zboot. This necessity is why the compressed relocatable kernel compiled by Clang encounters difficulties in booting. To address this problem, it is proposed to apply dynamic relocations to place with `--apply-dynamic-relocs`. Link: https://github.com/ClangBuiltLinux/linux/issues/1962 Signed-off-by: WANG Rui Signed-off-by: Huacai Chen --- arch/loongarch/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/loongarch/Makefile b/arch/loongarch/Makefile index 204b94b2e6aa..4ba8d67ddb09 100644 --- a/arch/loongarch/Makefile +++ b/arch/loongarch/Makefile @@ -83,7 +83,7 @@ endif ifeq ($(CONFIG_RELOCATABLE),y) KBUILD_CFLAGS_KERNEL += -fPIE -LDFLAGS_vmlinux += -static -pie --no-dynamic-linker -z notext +LDFLAGS_vmlinux += -static -pie --no-dynamic-linker -z notext $(call ld-option, --apply-dynamic-relocs) endif cflags-y += $(call cc-option, -mno-check-zero-division) -- cgit v1.2.3 From 8146c5b349074da7732f1d45eb4a5f9fd192c7c1 Mon Sep 17 00:00:00 2001 From: Xi Ruoyao Date: Sat, 9 Dec 2023 15:49:15 +0800 Subject: LoongArch: Slightly clean up drdtime() As we are just discarding the stable clock ID, simply write it into $zero instead of allocating a temporary register. Signed-off-by: Xi Ruoyao Signed-off-by: Huacai Chen --- arch/loongarch/include/asm/loongarch.h | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/arch/loongarch/include/asm/loongarch.h b/arch/loongarch/include/asm/loongarch.h index 9b4957cefa8a..46366e783c84 100644 --- a/arch/loongarch/include/asm/loongarch.h +++ b/arch/loongarch/include/asm/loongarch.h @@ -1098,12 +1098,11 @@ static __always_inline u64 drdtime(void) { - int rID = 0; u64 val = 0; __asm__ __volatile__( - "rdtime.d %0, %1 \n\t" - : "=r"(val), "=r"(rID) + "rdtime.d %0, $zero\n\t" + : "=r"(val) : ); return val; -- cgit v1.2.3 From 97ceddbc9404a7d1e2c4049435bff29427d762cc Mon Sep 17 00:00:00 2001 From: Jinyang He Date: Sat, 9 Dec 2023 15:49:15 +0800 Subject: LoongArch: Set unwind stack type to unknown rather than set error flag During unwinding, unwind_done() is used as an end condition. Normally it unwind to the user stack and then set the stack type to unknown, which is a normal exit. When something unexpected happens in unwind process and we cannot unwind anymore, we should set the error flag, and also set the stack type to unknown to indicate that the unwind process can not continue. The error flag emphasizes that the unwind process produce an unexpected error. There is no unexpected things when we unwind the PT_REGS in the top of IRQ stack and find out that is an user mode PT_REGS. Thus, we should not set error flag and just set stack type to unknown. Reported-by: Hengqi Chen Acked-by: Hengqi Chen Signed-off-by: Jinyang He Signed-off-by: Huacai Chen --- arch/loongarch/kernel/stacktrace.c | 2 +- arch/loongarch/kernel/unwind.c | 1 - arch/loongarch/kernel/unwind_prologue.c | 2 +- 3 files changed, 2 insertions(+), 3 deletions(-) diff --git a/arch/loongarch/kernel/stacktrace.c b/arch/loongarch/kernel/stacktrace.c index 92270f14db94..f623feb2129f 100644 --- a/arch/loongarch/kernel/stacktrace.c +++ b/arch/loongarch/kernel/stacktrace.c @@ -32,7 +32,7 @@ void arch_stack_walk(stack_trace_consume_fn consume_entry, void *cookie, } for (unwind_start(&state, task, regs); - !unwind_done(&state) && !unwind_error(&state); unwind_next_frame(&state)) { + !unwind_done(&state); unwind_next_frame(&state)) { addr = unwind_get_return_address(&state); if (!addr || !consume_entry(cookie, addr)) break; diff --git a/arch/loongarch/kernel/unwind.c b/arch/loongarch/kernel/unwind.c index ba324ba76fa1..a463d6961344 100644 --- a/arch/loongarch/kernel/unwind.c +++ b/arch/loongarch/kernel/unwind.c @@ -28,6 +28,5 @@ bool default_next_frame(struct unwind_state *state) } while (!get_stack_info(state->sp, state->task, info)); - state->error = true; return false; } diff --git a/arch/loongarch/kernel/unwind_prologue.c b/arch/loongarch/kernel/unwind_prologue.c index 55afc27320e1..929ae240280a 100644 --- a/arch/loongarch/kernel/unwind_prologue.c +++ b/arch/loongarch/kernel/unwind_prologue.c @@ -227,7 +227,7 @@ static bool next_frame(struct unwind_state *state) } while (!get_stack_info(state->sp, state->task, info)); out: - state->error = true; + state->stack_info.type = STACK_TYPE_UNKNOWN; return false; } -- cgit v1.2.3 From d6c5f06e46a836e6a70c7cfd95bb38a67d9252ec Mon Sep 17 00:00:00 2001 From: Hengqi Chen Date: Sat, 9 Dec 2023 15:49:15 +0800 Subject: LoongArch: Preserve syscall nr across execve() Currently, we store syscall nr in pt_regs::regs[11] and syscall execve() accidentally overrides it during its execution: sys_execve() -> do_execve() -> do_execveat_common() -> bprm_execve() -> exec_binprm() -> search_binary_handler() -> load_elf_binary() -> ELF_PLAT_INIT() ELF_PLAT_INIT() reset regs[11] to 0, so in syscall_exit_to_user_mode() we later get a wrong syscall nr. This breaks tools like execsnoop since it relies on execve() tracepoints. Skip pt_regs::regs[11] reset in ELF_PLAT_INIT() to fix the issue. Signed-off-by: Hengqi Chen Signed-off-by: Huacai Chen --- arch/loongarch/include/asm/elf.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/loongarch/include/asm/elf.h b/arch/loongarch/include/asm/elf.h index b9a4ab54285c..9b16a3b8e706 100644 --- a/arch/loongarch/include/asm/elf.h +++ b/arch/loongarch/include/asm/elf.h @@ -293,7 +293,7 @@ extern const char *__elf_platform; #define ELF_PLAT_INIT(_r, load_addr) do { \ _r->regs[1] = _r->regs[2] = _r->regs[3] = _r->regs[4] = 0; \ _r->regs[5] = _r->regs[6] = _r->regs[7] = _r->regs[8] = 0; \ - _r->regs[9] = _r->regs[10] = _r->regs[11] = _r->regs[12] = 0; \ + _r->regs[9] = _r->regs[10] /* syscall n */ = _r->regs[12] = 0; \ _r->regs[13] = _r->regs[14] = _r->regs[15] = _r->regs[16] = 0; \ _r->regs[17] = _r->regs[18] = _r->regs[19] = _r->regs[20] = 0; \ _r->regs[21] = _r->regs[22] = _r->regs[23] = _r->regs[24] = 0; \ -- cgit v1.2.3 From fe5757553bf9ebe45ae8ecab5922f6937c8d8dfc Mon Sep 17 00:00:00 2001 From: Hengqi Chen Date: Sat, 9 Dec 2023 15:49:16 +0800 Subject: LoongArch: BPF: Don't sign extend memory load operand The `cgrp_local_storage` test triggers a kernel panic like: # ./test_progs -t cgrp_local_storage Can't find bpf_testmod.ko kernel module: -2 WARNING! Selftests relying on bpf_testmod.ko will be skipped. [ 550.930632] CPU 1 Unable to handle kernel paging request at virtual address 0000000000000080, era == ffff80000200be34, ra == ffff80000200be00 [ 550.931781] Oops[#1]: [ 550.931966] CPU: 1 PID: 1303 Comm: test_progs Not tainted 6.7.0-rc2-loong-devel-g2f56bb0d2327 #35 a896aca3f4164f09cc346f89f2e09832e07be5f6 [ 550.932215] Hardware name: QEMU QEMU Virtual Machine, BIOS unknown 2/2/2022 [ 550.932403] pc ffff80000200be34 ra ffff80000200be00 tp 9000000108350000 sp 9000000108353dc0 [ 550.932545] a0 0000000000000000 a1 0000000000000517 a2 0000000000000118 a3 00007ffffbb15558 [ 550.932682] a4 00007ffffbb15620 a5 90000001004e7700 a6 0000000000000021 a7 0000000000000118 [ 550.932824] t0 ffff80000200bdc0 t1 0000000000000517 t2 0000000000000517 t3 00007ffff1c06ee0 [ 550.932961] t4 0000555578ae04d0 t5 fffffffffffffff8 t6 0000000000000004 t7 0000000000000020 [ 550.933097] t8 0000000000000040 u0 00000000000007b8 s9 9000000108353e00 s0 90000001004e7700 [ 550.933241] s1 9000000004005000 s2 0000000000000001 s3 0000000000000000 s4 0000555555eb2ec8 [ 550.933379] s5 00007ffffbb15bb8 s6 00007ffff1dafd60 s7 000055555663f610 s8 00007ffff1db0050 [ 550.933520] ra: ffff80000200be00 bpf_prog_98f1b9e767be2a84_on_enter+0x40/0x200 [ 550.933911] ERA: ffff80000200be34 bpf_prog_98f1b9e767be2a84_on_enter+0x74/0x200 [ 550.934105] CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE) [ 550.934596] PRMD: 00000004 (PPLV0 +PIE -PWE) [ 550.934712] EUEN: 00000003 (+FPE +SXE -ASXE -BTE) [ 550.934836] ECFG: 00071c1c (LIE=2-4,10-12 VS=7) [ 550.934976] ESTAT: 00010000 [PIL] (IS= ECode=1 EsubCode=0) [ 550.935097] BADV: 0000000000000080 [ 550.935181] PRID: 0014c010 (Loongson-64bit, Loongson-3A5000) [ 550.935291] Modules linked in: [ 550.935391] Process test_progs (pid: 1303, threadinfo=000000006c3b1c41, task=0000000061f84a55) [ 550.935643] Stack : 00007ffffbb15bb8 0000555555eb2ec8 0000000000000000 0000000000000001 [ 550.935844] 9000000004005000 ffff80001b864000 00007ffffbb15450 90000000029aa034 [ 550.935990] 0000000000000000 9000000108353ec0 0000000000000118 d07d9dfb09721a09 [ 550.936175] 0000000000000001 0000000000000000 9000000108353ec0 0000000000000118 [ 550.936314] 9000000101d46ad0 900000000290abf0 000055555663f610 0000000000000000 [ 550.936479] 0000000000000003 9000000108353ec0 00007ffffbb15450 90000000029d7288 [ 550.936635] 00007ffff1dafd60 000055555663f610 0000000000000000 0000000000000003 [ 550.936779] 9000000108353ec0 90000000035dd1f0 00007ffff1dafd58 9000000002841c5c [ 550.936939] 0000000000000119 0000555555eea5a8 00007ffff1d78780 00007ffffbb153e0 [ 550.937083] ffffffffffffffda 00007ffffbb15518 0000000000000040 00007ffffbb15558 [ 550.937224] ... [ 550.937299] Call Trace: [ 550.937521] [] bpf_prog_98f1b9e767be2a84_on_enter+0x74/0x200 [ 550.937910] [<90000000029aa034>] bpf_trace_run2+0x90/0x154 [ 550.938105] [<900000000290abf0>] syscall_trace_enter.isra.0+0x1cc/0x200 [ 550.938224] [<90000000035dd1f0>] do_syscall+0x48/0x94 [ 550.938319] [<9000000002841c5c>] handle_syscall+0xbc/0x158 [ 550.938477] [ 550.938607] Code: 580009ae 50016000 262402e4 <28c20085> 14092084 03a00084 16000024 03240084 00150006 [ 550.938851] [ 550.939021] ---[ end trace 0000000000000000 ]--- Further investigation shows that this panic is triggered by memory load operations: ptr = bpf_cgrp_storage_get(&map_a, task->cgroups->dfl_cgrp, 0, BPF_LOCAL_STORAGE_GET_F_CREATE); The expression `task->cgroups->dfl_cgrp` involves two memory load. Since the field offset fits in imm12 or imm14, we use ldd or ldptrd instructions. But both instructions have the side effect that it will signed-extended the imm operand. Finally, we got the wrong addresses and panics is inevitable. Use a generic ldxd instruction to avoid this kind of issues. With this change, we have: # ./test_progs -t cgrp_local_storage Can't find bpf_testmod.ko kernel module: -2 WARNING! Selftests relying on bpf_testmod.ko will be skipped. test_cgrp_local_storage:PASS:join_cgroup /cgrp_local_storage 0 nsec #48/1 cgrp_local_storage/tp_btf:OK test_attach_cgroup:PASS:skel_open 0 nsec test_attach_cgroup:PASS:prog_attach 0 nsec test_attach_cgroup:PASS:prog_attach 0 nsec libbpf: prog 'update_cookie_tracing': failed to attach: ERROR: strerror_r(-524)=22 test_attach_cgroup:FAIL:prog_attach unexpected error: -524 #48/2 cgrp_local_storage/attach_cgroup:FAIL test_recursion:PASS:skel_open_and_load 0 nsec libbpf: prog 'on_lookup': failed to attach: ERROR: strerror_r(-524)=22 libbpf: prog 'on_lookup': failed to auto-attach: -524 test_recursion:FAIL:skel_attach unexpected error: -524 (errno 524) #48/3 cgrp_local_storage/recursion:FAIL #48/4 cgrp_local_storage/negative:OK #48/5 cgrp_local_storage/cgroup_iter_sleepable:OK test_yes_rcu_lock:PASS:skel_open 0 nsec test_yes_rcu_lock:PASS:skel_load 0 nsec libbpf: prog 'yes_rcu_lock': failed to attach: ERROR: strerror_r(-524)=22 libbpf: prog 'yes_rcu_lock': failed to auto-attach: -524 test_yes_rcu_lock:FAIL:skel_attach unexpected error: -524 (errno 524) #48/6 cgrp_local_storage/yes_rcu_lock:FAIL #48/7 cgrp_local_storage/no_rcu_lock:OK #48 cgrp_local_storage:FAIL All error logs: test_cgrp_local_storage:PASS:join_cgroup /cgrp_local_storage 0 nsec test_attach_cgroup:PASS:skel_open 0 nsec test_attach_cgroup:PASS:prog_attach 0 nsec test_attach_cgroup:PASS:prog_attach 0 nsec libbpf: prog 'update_cookie_tracing': failed to attach: ERROR: strerror_r(-524)=22 test_attach_cgroup:FAIL:prog_attach unexpected error: -524 #48/2 cgrp_local_storage/attach_cgroup:FAIL test_recursion:PASS:skel_open_and_load 0 nsec libbpf: prog 'on_lookup': failed to attach: ERROR: strerror_r(-524)=22 libbpf: prog 'on_lookup': failed to auto-attach: -524 test_recursion:FAIL:skel_attach unexpected error: -524 (errno 524) #48/3 cgrp_local_storage/recursion:FAIL test_yes_rcu_lock:PASS:skel_open 0 nsec test_yes_rcu_lock:PASS:skel_load 0 nsec libbpf: prog 'yes_rcu_lock': failed to attach: ERROR: strerror_r(-524)=22 libbpf: prog 'yes_rcu_lock': failed to auto-attach: -524 test_yes_rcu_lock:FAIL:skel_attach unexpected error: -524 (errno 524) #48/6 cgrp_local_storage/yes_rcu_lock:FAIL #48 cgrp_local_storage:FAIL Summary: 0/4 PASSED, 0 SKIPPED, 1 FAILED No panics any more (The test still failed because lack of BPF trampoline which I am actively working on). Fixes: 5dc615520c4d ("LoongArch: Add BPF JIT support") Signed-off-by: Hengqi Chen Signed-off-by: Huacai Chen --- arch/loongarch/net/bpf_jit.c | 10 ++-------- 1 file changed, 2 insertions(+), 8 deletions(-) diff --git a/arch/loongarch/net/bpf_jit.c b/arch/loongarch/net/bpf_jit.c index 169ff8b3915e..d2161c95ceb4 100644 --- a/arch/loongarch/net/bpf_jit.c +++ b/arch/loongarch/net/bpf_jit.c @@ -988,14 +988,8 @@ static int build_insn(const struct bpf_insn *insn, struct jit_ctx *ctx, bool ext } break; case BPF_DW: - if (is_signed_imm12(off)) { - emit_insn(ctx, ldd, dst, src, off); - } else if (is_signed_imm14(off)) { - emit_insn(ctx, ldptrd, dst, src, off); - } else { - move_imm(ctx, t1, off, is32); - emit_insn(ctx, ldxd, dst, src, t1); - } + move_imm(ctx, t1, off, is32); + emit_insn(ctx, ldxd, dst, src, t1); break; } -- cgit v1.2.3 From 5d47ec2e6f4c64e30e392cfe9532df98c9beb106 Mon Sep 17 00:00:00 2001 From: Hengqi Chen Date: Sat, 9 Dec 2023 15:49:16 +0800 Subject: LoongArch: BPF: Don't sign extend function return value The `cls_redirect` test triggers a kernel panic like: # ./test_progs -t cls_redirect Can't find bpf_testmod.ko kernel module: -2 WARNING! Selftests relying on bpf_testmod.ko will be skipped. [ 30.938489] CPU 3 Unable to handle kernel paging request at virtual address fffffffffd814de0, era == ffff800002009fb8, ra == ffff800002009f9c [ 30.939331] Oops[#1]: [ 30.939513] CPU: 3 PID: 1260 Comm: test_progs Not tainted 6.7.0-rc2-loong-devel-g2f56bb0d2327 #35 a896aca3f4164f09cc346f89f2e09832e07be5f6 [ 30.939732] Hardware name: QEMU QEMU Virtual Machine, BIOS unknown 2/2/2022 [ 30.939901] pc ffff800002009fb8 ra ffff800002009f9c tp 9000000104da4000 sp 9000000104da7ab0 [ 30.940038] a0 fffffffffd814de0 a1 9000000104da7a68 a2 0000000000000000 a3 9000000104da7c10 [ 30.940183] a4 9000000104da7c14 a5 0000000000000002 a6 0000000000000021 a7 00005555904d7f90 [ 30.940321] t0 0000000000000110 t1 0000000000000000 t2 fffffffffd814de0 t3 0004c4b400000000 [ 30.940456] t4 ffffffffffffffff t5 00000000c3f63600 t6 0000000000000000 t7 0000000000000000 [ 30.940590] t8 000000000006d803 u0 0000000000000020 s9 9000000104da7b10 s0 900000010504c200 [ 30.940727] s1 fffffffffd814de0 s2 900000010504c200 s3 9000000104da7c10 s4 9000000104da7ad0 [ 30.940866] s5 0000000000000000 s6 90000000030e65bc s7 9000000104da7b44 s8 90000000044f6fc0 [ 30.941015] ra: ffff800002009f9c bpf_prog_846803e5ae81417f_cls_redirect+0xa0/0x590 [ 30.941535] ERA: ffff800002009fb8 bpf_prog_846803e5ae81417f_cls_redirect+0xbc/0x590 [ 30.941696] CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE) [ 30.942224] PRMD: 00000004 (PPLV0 +PIE -PWE) [ 30.942330] EUEN: 00000003 (+FPE +SXE -ASXE -BTE) [ 30.942453] ECFG: 00071c1c (LIE=2-4,10-12 VS=7) [ 30.942612] ESTAT: 00010000 [PIL] (IS= ECode=1 EsubCode=0) [ 30.942764] BADV: fffffffffd814de0 [ 30.942854] PRID: 0014c010 (Loongson-64bit, Loongson-3A5000) [ 30.942974] Modules linked in: [ 30.943078] Process test_progs (pid: 1260, threadinfo=00000000ce303226, task=000000007d10bb76) [ 30.943306] Stack : 900000010a064000 90000000044f6fc0 9000000104da7b48 0000000000000000 [ 30.943495] 0000000000000000 9000000104da7c14 9000000104da7c10 900000010504c200 [ 30.943626] 0000000000000001 ffff80001b88c000 9000000104da7b70 90000000030e6668 [ 30.943785] 0000000000000000 9000000104da7b58 ffff80001b88c048 9000000003d05000 [ 30.943936] 900000000303ac88 0000000000000000 0000000000000000 9000000104da7b70 [ 30.944091] 0000000000000000 0000000000000001 0000000731eeab00 0000000000000000 [ 30.944245] ffff80001b88c000 0000000000000000 0000000000000000 54b99959429f83b8 [ 30.944402] ffff80001b88c000 90000000044f6fc0 9000000101d70000 ffff80001b88c000 [ 30.944538] 000000000000005a 900000010504c200 900000010a064000 900000010a067000 [ 30.944697] 9000000104da7d88 0000000000000000 9000000003d05000 90000000030e794c [ 30.944852] ... [ 30.944924] Call Trace: [ 30.945120] [] bpf_prog_846803e5ae81417f_cls_redirect+0xbc/0x590 [ 30.945650] [<90000000030e6668>] bpf_test_run+0x1ec/0x2f8 [ 30.945958] [<90000000030e794c>] bpf_prog_test_run_skb+0x31c/0x684 [ 30.946065] [<90000000026d4f68>] __sys_bpf+0x678/0x2724 [ 30.946159] [<90000000026d7288>] sys_bpf+0x20/0x2c [ 30.946253] [<90000000032dd224>] do_syscall+0x7c/0x94 [ 30.946343] [<9000000002541c5c>] handle_syscall+0xbc/0x158 [ 30.946492] [ 30.946549] Code: 0015030e 5c0009c0 5001d000 <28c00304> 02c00484 29c00304 00150009 2a42d2e4 0280200d [ 30.946793] [ 30.946971] ---[ end trace 0000000000000000 ]--- [ 32.093225] Kernel panic - not syncing: Fatal exception in interrupt [ 32.093526] Kernel relocated by 0x2320000 [ 32.093630] .text @ 0x9000000002520000 [ 32.093725] .data @ 0x9000000003400000 [ 32.093792] .bss @ 0x9000000004413200 [ 34.971998] ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]--- This is because we signed-extend function return values. When subprog mode is enabled, we have: cls_redirect() -> get_global_metrics() returns pcpu ptr 0xfffffefffc00b480 The pointer returned is later signed-extended to 0xfffffffffc00b480 at `BPF_JMP | BPF_EXIT`. During BPF prog run, this triggers unhandled page fault and a kernel panic. Drop the unnecessary signed-extension on return values like other architectures do. With this change, we have: # ./test_progs -t cls_redirect Can't find bpf_testmod.ko kernel module: -2 WARNING! Selftests relying on bpf_testmod.ko will be skipped. #51/1 cls_redirect/cls_redirect_inlined:OK #51/2 cls_redirect/IPv4 TCP accept unknown (no hops, flags: SYN):OK #51/3 cls_redirect/IPv6 TCP accept unknown (no hops, flags: SYN):OK #51/4 cls_redirect/IPv4 TCP accept unknown (no hops, flags: ACK):OK #51/5 cls_redirect/IPv6 TCP accept unknown (no hops, flags: ACK):OK #51/6 cls_redirect/IPv4 TCP forward unknown (one hop, flags: ACK):OK #51/7 cls_redirect/IPv6 TCP forward unknown (one hop, flags: ACK):OK #51/8 cls_redirect/IPv4 TCP accept known (one hop, flags: ACK):OK #51/9 cls_redirect/IPv6 TCP accept known (one hop, flags: ACK):OK #51/10 cls_redirect/IPv4 UDP accept unknown (no hops, flags: none):OK #51/11 cls_redirect/IPv6 UDP accept unknown (no hops, flags: none):OK #51/12 cls_redirect/IPv4 UDP forward unknown (one hop, flags: none):OK #51/13 cls_redirect/IPv6 UDP forward unknown (one hop, flags: none):OK #51/14 cls_redirect/IPv4 UDP accept known (one hop, flags: none):OK #51/15 cls_redirect/IPv6 UDP accept known (one hop, flags: none):OK #51/16 cls_redirect/cls_redirect_subprogs:OK #51/17 cls_redirect/IPv4 TCP accept unknown (no hops, flags: SYN):OK #51/18 cls_redirect/IPv6 TCP accept unknown (no hops, flags: SYN):OK #51/19 cls_redirect/IPv4 TCP accept unknown (no hops, flags: ACK):OK #51/20 cls_redirect/IPv6 TCP accept unknown (no hops, flags: ACK):OK #51/21 cls_redirect/IPv4 TCP forward unknown (one hop, flags: ACK):OK #51/22 cls_redirect/IPv6 TCP forward unknown (one hop, flags: ACK):OK #51/23 cls_redirect/IPv4 TCP accept known (one hop, flags: ACK):OK #51/24 cls_redirect/IPv6 TCP accept known (one hop, flags: ACK):OK #51/25 cls_redirect/IPv4 UDP accept unknown (no hops, flags: none):OK #51/26 cls_redirect/IPv6 UDP accept unknown (no hops, flags: none):OK #51/27 cls_redirect/IPv4 UDP forward unknown (one hop, flags: none):OK #51/28 cls_redirect/IPv6 UDP forward unknown (one hop, flags: none):OK #51/29 cls_redirect/IPv4 UDP accept known (one hop, flags: none):OK #51/30 cls_redirect/IPv6 UDP accept known (one hop, flags: none):OK #51/31 cls_redirect/cls_redirect_dynptr:OK #51/32 cls_redirect/IPv4 TCP accept unknown (no hops, flags: SYN):OK #51/33 cls_redirect/IPv6 TCP accept unknown (no hops, flags: SYN):OK #51/34 cls_redirect/IPv4 TCP accept unknown (no hops, flags: ACK):OK #51/35 cls_redirect/IPv6 TCP accept unknown (no hops, flags: ACK):OK #51/36 cls_redirect/IPv4 TCP forward unknown (one hop, flags: ACK):OK #51/37 cls_redirect/IPv6 TCP forward unknown (one hop, flags: ACK):OK #51/38 cls_redirect/IPv4 TCP accept known (one hop, flags: ACK):OK #51/39 cls_redirect/IPv6 TCP accept known (one hop, flags: ACK):OK #51/40 cls_redirect/IPv4 UDP accept unknown (no hops, flags: none):OK #51/41 cls_redirect/IPv6 UDP accept unknown (no hops, flags: none):OK #51/42 cls_redirect/IPv4 UDP forward unknown (one hop, flags: none):OK #51/43 cls_redirect/IPv6 UDP forward unknown (one hop, flags: none):OK #51/44 cls_redirect/IPv4 UDP accept known (one hop, flags: none):OK #51/45 cls_redirect/IPv6 UDP accept known (one hop, flags: none):OK #51 cls_redirect:OK Summary: 1/45 PASSED, 0 SKIPPED, 0 FAILED Fixes: 5dc615520c4d ("LoongArch: Add BPF JIT support") Signed-off-by: Hengqi Chen Signed-off-by: Huacai Chen --- arch/loongarch/net/bpf_jit.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/arch/loongarch/net/bpf_jit.c b/arch/loongarch/net/bpf_jit.c index d2161c95ceb4..d76281efc5b8 100644 --- a/arch/loongarch/net/bpf_jit.c +++ b/arch/loongarch/net/bpf_jit.c @@ -911,8 +911,6 @@ static int build_insn(const struct bpf_insn *insn, struct jit_ctx *ctx, bool ext /* function return */ case BPF_JMP | BPF_EXIT: - emit_sext_32(ctx, regmap[BPF_REG_0], true); - if (i == ctx->prog->len - 1) break; -- cgit v1.2.3 From 772cbe948fb07389639d4e698a2d3299f8e538b8 Mon Sep 17 00:00:00 2001 From: Tiezhu Yang Date: Sat, 9 Dec 2023 15:49:16 +0800 Subject: LoongArch: BPF: Fix sign-extension mov instructions We can see that "Short form of movsx, dst_reg = (s8,s16,s32)src_reg" in include/linux/filter.h, additionally, for BPF_ALU64 the value of the destination register is unchanged whereas for BPF_ALU the upper 32 bits of the destination register are zeroed, so it should clear the upper 32 bits for BPF_ALU. [root@linux fedora]# echo 1 > /proc/sys/net/core/bpf_jit_enable [root@linux fedora]# modprobe test_bpf Before: test_bpf: #81 ALU_MOVSX | BPF_B jited:1 ret 2 != 1 (0x2 != 0x1)FAIL (1 times) test_bpf: #82 ALU_MOVSX | BPF_H jited:1 ret 2 != 1 (0x2 != 0x1)FAIL (1 times) After: test_bpf: #81 ALU_MOVSX | BPF_B jited:1 6 PASS test_bpf: #82 ALU_MOVSX | BPF_H jited:1 6 PASS By the way, the bpf selftest case "./test_progs -t verifier_movsx" can also be fixed with this patch. Fixes: f48012f16150 ("LoongArch: BPF: Support sign-extension mov instructions") Acked-by: Hengqi Chen Signed-off-by: Tiezhu Yang Signed-off-by: Huacai Chen --- arch/loongarch/net/bpf_jit.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/loongarch/net/bpf_jit.c b/arch/loongarch/net/bpf_jit.c index d76281efc5b8..cd002f183648 100644 --- a/arch/loongarch/net/bpf_jit.c +++ b/arch/loongarch/net/bpf_jit.c @@ -480,10 +480,12 @@ static int build_insn(const struct bpf_insn *insn, struct jit_ctx *ctx, bool ext case 8: move_reg(ctx, t1, src); emit_insn(ctx, extwb, dst, t1); + emit_zext_32(ctx, dst, is32); break; case 16: move_reg(ctx, t1, src); emit_insn(ctx, extwh, dst, t1); + emit_zext_32(ctx, dst, is32); break; case 32: emit_insn(ctx, addw, dst, src, LOONGARCH_GPR_ZERO); -- cgit v1.2.3 From e2f7b3d8b4b300956a77fa1ab084c931ba1c7421 Mon Sep 17 00:00:00 2001 From: Tiezhu Yang Date: Sat, 9 Dec 2023 15:49:16 +0800 Subject: LoongArch: BPF: Fix unconditional bswap instructions We can see that "bswap32: Takes an unsigned 32-bit number in either big- or little-endian format and returns the equivalent number with the same bit width but opposite endianness" in BPF Instruction Set Specification, so it should clear the upper 32 bits in "case 32:" for both BPF_ALU and BPF_ALU64. [root@linux fedora]# echo 1 > /proc/sys/net/core/bpf_jit_enable [root@linux fedora]# modprobe test_bpf Before: test_bpf: #313 BSWAP 32: 0x0123456789abcdef -> 0xefcdab89 jited:1 ret 1460850314 != -271733879 (0x5712ce8a != 0xefcdab89)FAIL (1 times) test_bpf: #317 BSWAP 32: 0xfedcba9876543210 -> 0x10325476 jited:1 ret -1460850316 != 271733878 (0xa8ed3174 != 0x10325476)FAIL (1 times) After: test_bpf: #313 BSWAP 32: 0x0123456789abcdef -> 0xefcdab89 jited:1 4 PASS test_bpf: #317 BSWAP 32: 0xfedcba9876543210 -> 0x10325476 jited:1 4 PASS Fixes: 4ebf9216e7df ("LoongArch: BPF: Support unconditional bswap instructions") Acked-by: Hengqi Chen Signed-off-by: Tiezhu Yang Signed-off-by: Huacai Chen --- arch/loongarch/net/bpf_jit.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/loongarch/net/bpf_jit.c b/arch/loongarch/net/bpf_jit.c index cd002f183648..4fcd6cd6da23 100644 --- a/arch/loongarch/net/bpf_jit.c +++ b/arch/loongarch/net/bpf_jit.c @@ -774,8 +774,8 @@ static int build_insn(const struct bpf_insn *insn, struct jit_ctx *ctx, bool ext break; case 32: emit_insn(ctx, revb2w, dst, dst); - /* zero-extend 32 bits into 64 bits */ - emit_zext_32(ctx, dst, is32); + /* clear the upper 32 bits */ + emit_zext_32(ctx, dst, true); break; case 64: emit_insn(ctx, revbd, dst, dst); -- cgit v1.2.3 From d5dba32b8f6cb39be708b726044ba30dbc088b30 Mon Sep 17 00:00:00 2001 From: Chengfeng Ye Date: Thu, 7 Dec 2023 12:34:37 +0000 Subject: atm: solos-pci: Fix potential deadlock on &cli_queue_lock As &card->cli_queue_lock is acquired under softirq context along the following call chain from solos_bh(), other acquisition of the same lock inside process context should disable at least bh to avoid double lock. console_show() --> spin_lock(&card->cli_queue_lock) --> solos_bh() --> spin_lock(&card->cli_queue_lock) This flaw was found by an experimental static analysis tool I am developing for irq-related deadlock. To prevent the potential deadlock, the patch uses spin_lock_bh() on the card->cli_queue_lock under process context code consistently to prevent the possible deadlock scenario. Fixes: 9c54004ea717 ("atm: Driver for Solos PCI ADSL2+ card.") Signed-off-by: Chengfeng Ye Signed-off-by: David S. Miller --- drivers/atm/solos-pci.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/atm/solos-pci.c b/drivers/atm/solos-pci.c index 94fbc3abe60e..95f768b28a5e 100644 --- a/drivers/atm/solos-pci.c +++ b/drivers/atm/solos-pci.c @@ -449,9 +449,9 @@ static ssize_t console_show(struct device *dev, struct device_attribute *attr, struct sk_buff *skb; unsigned int len; - spin_lock(&card->cli_queue_lock); + spin_lock_bh(&card->cli_queue_lock); skb = skb_dequeue(&card->cli_queue[SOLOS_CHAN(atmdev)]); - spin_unlock(&card->cli_queue_lock); + spin_unlock_bh(&card->cli_queue_lock); if(skb == NULL) return sprintf(buf, "No data.\n"); -- cgit v1.2.3 From 15319a4e8ee4b098118591c6ccbd17237f841613 Mon Sep 17 00:00:00 2001 From: Chengfeng Ye Date: Thu, 7 Dec 2023 12:34:53 +0000 Subject: atm: solos-pci: Fix potential deadlock on &tx_queue_lock As &card->tx_queue_lock is acquired under softirq context along the following call chain from solos_bh(), other acquisition of the same lock inside process context should disable at least bh to avoid double lock. pclose() --> spin_lock(&card->tx_queue_lock) --> solos_bh() --> fpga_tx() --> spin_lock(&card->tx_queue_lock) This flaw was found by an experimental static analysis tool I am developing for irq-related deadlock. To prevent the potential deadlock, the patch uses spin_lock_bh() on &card->tx_queue_lock under process context code consistently to prevent the possible deadlock scenario. Fixes: 213e85d38912 ("solos-pci: clean up pclose() function") Signed-off-by: Chengfeng Ye Signed-off-by: David S. Miller --- drivers/atm/solos-pci.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/atm/solos-pci.c b/drivers/atm/solos-pci.c index 95f768b28a5e..d3c30a28c410 100644 --- a/drivers/atm/solos-pci.c +++ b/drivers/atm/solos-pci.c @@ -956,14 +956,14 @@ static void pclose(struct atm_vcc *vcc) struct pkt_hdr *header; /* Remove any yet-to-be-transmitted packets from the pending queue */ - spin_lock(&card->tx_queue_lock); + spin_lock_bh(&card->tx_queue_lock); skb_queue_walk_safe(&card->tx_queue[port], skb, tmpskb) { if (SKB_CB(skb)->vcc == vcc) { skb_unlink(skb, &card->tx_queue[port]); solos_pop(vcc, skb); } } - spin_unlock(&card->tx_queue_lock); + spin_unlock_bh(&card->tx_queue_lock); skb = alloc_skb(sizeof(*header), GFP_KERNEL); if (!skb) { -- cgit v1.2.3 From 69db702c83874fbaa2a51af761e35a8e5a593b95 Mon Sep 17 00:00:00 2001 From: Pavel Begunkov Date: Wed, 6 Dec 2023 13:55:19 +0000 Subject: io_uring/af_unix: disable sending io_uring over sockets File reference cycles have caused lots of problems for io_uring in the past, and it still doesn't work exactly right and races with unix_stream_read_generic(). The safest fix would be to completely disallow sending io_uring files via sockets via SCM_RIGHT, so there are no possible cycles invloving registered files and thus rendering SCM accounting on the io_uring side unnecessary. Cc: stable@vger.kernel.org Fixes: 0091bfc81741b ("io_uring/af_unix: defer registered files gc to io_uring release") Reported-and-suggested-by: Jann Horn Signed-off-by: Pavel Begunkov Acked-by: Jakub Kicinski Signed-off-by: David S. Miller --- io_uring/rsrc.h | 7 ------- net/core/scm.c | 6 ++++++ 2 files changed, 6 insertions(+), 7 deletions(-) diff --git a/io_uring/rsrc.h b/io_uring/rsrc.h index 8625181fb87a..08ac0d8e07ef 100644 --- a/io_uring/rsrc.h +++ b/io_uring/rsrc.h @@ -77,17 +77,10 @@ int io_sqe_files_register(struct io_ring_ctx *ctx, void __user *arg, int __io_scm_file_account(struct io_ring_ctx *ctx, struct file *file); -#if defined(CONFIG_UNIX) -static inline bool io_file_need_scm(struct file *filp) -{ - return !!unix_get_socket(filp); -} -#else static inline bool io_file_need_scm(struct file *filp) { return false; } -#endif static inline int io_scm_file_account(struct io_ring_ctx *ctx, struct file *file) diff --git a/net/core/scm.c b/net/core/scm.c index 880027ecf516..7dc47c17d863 100644 --- a/net/core/scm.c +++ b/net/core/scm.c @@ -26,6 +26,7 @@ #include #include #include +#include #include @@ -103,6 +104,11 @@ static int scm_fp_copy(struct cmsghdr *cmsg, struct scm_fp_list **fplp) if (fd < 0 || !(file = fget_raw(fd))) return -EBADF; + /* don't allow io_uring files */ + if (io_uring_get_socket(file)) { + fput(file); + return -EINVAL; + } *fpp++ = file; fpl->count++; } -- cgit v1.2.3 From 3b1ff57e24a7bcd2e2a8426dd2013a80d1fa96eb Mon Sep 17 00:00:00 2001 From: Kai Vehmanen Date: Fri, 8 Dec 2023 15:21:26 +0200 Subject: ALSA: hda/hdmi: add force-connect quirk for NUC5CPYB MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Add one more older NUC model that requires quirk to force all pins to be connected. The display codec pins are not registered properly without the force-connect quirk. The codec will report only one pin as having external connectivity, but i915 finds all three connectors on the system, so the two drivers are not in sync. Issue found with DRM igt-gpu-tools test kms_hdmi_inject@inject-audio. Link: https://gitlab.freedesktop.org/drm/igt-gpu-tools/-/issues/3 Cc: Ville Syrjälä Cc: Jani Saarinen Signed-off-by: Kai Vehmanen Cc: Link: https://lore.kernel.org/r/20231208132127.2438067-2-kai.vehmanen@linux.intel.com Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_hdmi.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c index 1cde2a69bdb4..b152c941414f 100644 --- a/sound/pci/hda/patch_hdmi.c +++ b/sound/pci/hda/patch_hdmi.c @@ -1994,6 +1994,7 @@ static const struct snd_pci_quirk force_connect_list[] = { SND_PCI_QUIRK(0x103c, 0x8711, "HP", 1), SND_PCI_QUIRK(0x103c, 0x8715, "HP", 1), SND_PCI_QUIRK(0x1462, 0xec94, "MS-7C94", 1), + SND_PCI_QUIRK(0x8086, 0x2060, "Intel NUC5CPYB", 1), SND_PCI_QUIRK(0x8086, 0x2081, "Intel NUC 10", 1), {} }; -- cgit v1.2.3 From 924f5ca2975b2993ee81a7ecc3c809943a70f334 Mon Sep 17 00:00:00 2001 From: Kai Vehmanen Date: Fri, 8 Dec 2023 15:21:27 +0200 Subject: ALSA: hda/hdmi: add force-connect quirks for ASUSTeK Z170 variants MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit On ASUSTeK Z170M PLUS and Z170 PRO GAMING systems, the display codec pins are not registered properly without the force-connect quirk. The codec will report only one pin as having external connectivity, but i915 finds all three connectors on the system, so the two drivers are not in sync. Issue found with DRM igt-gpu-tools test kms_hdmi_inject@inject-audio. Link: https://gitlab.freedesktop.org/drm/intel/-/issues/9801 Cc: Ville Syrjälä Cc: Jani Saarinen Signed-off-by: Kai Vehmanen Cc: Link: https://lore.kernel.org/r/20231208132127.2438067-3-kai.vehmanen@linux.intel.com Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_hdmi.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c index b152c941414f..78cee53fee02 100644 --- a/sound/pci/hda/patch_hdmi.c +++ b/sound/pci/hda/patch_hdmi.c @@ -1993,6 +1993,8 @@ static const struct snd_pci_quirk force_connect_list[] = { SND_PCI_QUIRK(0x103c, 0x871a, "HP", 1), SND_PCI_QUIRK(0x103c, 0x8711, "HP", 1), SND_PCI_QUIRK(0x103c, 0x8715, "HP", 1), + SND_PCI_QUIRK(0x1043, 0x86ae, "ASUS", 1), /* Z170 PRO */ + SND_PCI_QUIRK(0x1043, 0x86c7, "ASUS", 1), /* Z170M PLUS */ SND_PCI_QUIRK(0x1462, 0xec94, "MS-7C94", 1), SND_PCI_QUIRK(0x8086, 0x2060, "Intel NUC5CPYB", 1), SND_PCI_QUIRK(0x8086, 0x2081, "Intel NUC 10", 1), -- cgit v1.2.3 From 9b726bf6ae11add6a7a52883a21f90ff9cbca916 Mon Sep 17 00:00:00 2001 From: Hartmut Knaack Date: Sat, 9 Dec 2023 15:47:07 +0100 Subject: ALSA: hda/realtek: Apply mute LED quirk for HP15-db The HP laptop 15-db0403ng uses the ALC236 codec and controls the mute LED using COEF 0x07 index 1. Sound card subsystem: Hewlett-Packard Company Device [103c:84ae] Use the existing quirk for this model. Signed-off-by: Hartmut Knaack Cc: Link: https://lore.kernel.org/r/e61815d0-f1c7-b164-e49d-6ca84771476a@gmx.de Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 0377912e9264..e45d4c405f8f 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -9795,6 +9795,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x103c, 0x83b9, "HP Spectre x360", ALC269_FIXUP_HP_MUTE_LED_MIC3), SND_PCI_QUIRK(0x103c, 0x841c, "HP Pavilion 15-CK0xx", ALC269_FIXUP_HP_MUTE_LED_MIC3), SND_PCI_QUIRK(0x103c, 0x8497, "HP Envy x360", ALC269_FIXUP_HP_MUTE_LED_MIC3), + SND_PCI_QUIRK(0x103c, 0x84ae, "HP 15-db0403ng", ALC236_FIXUP_HP_MUTE_LED_COEFBIT2), SND_PCI_QUIRK(0x103c, 0x84da, "HP OMEN dc0019-ur", ALC295_FIXUP_HP_OMEN), SND_PCI_QUIRK(0x103c, 0x84e7, "HP Pavilion 15", ALC269_FIXUP_HP_MUTE_LED_MIC3), SND_PCI_QUIRK(0x103c, 0x8519, "HP Spectre x360 15-df0xxx", ALC285_FIXUP_HP_SPECTRE_X360), -- cgit v1.2.3 From 75a25d31b80770485641ad2789a854955f5c1e40 Mon Sep 17 00:00:00 2001 From: Gergo Koteles Date: Sat, 9 Dec 2023 22:18:29 +0100 Subject: ALSA: hda/tas2781: leave hda_component in usable state Unloading then loading the module causes a NULL ponter dereference. The hda_unbind zeroes the hda_component, later the hda_bind tries to dereference the codec field. The hda_component is only initialized once by tas2781_generic_fixup. Set only previously modified fields to NULL. BUG: kernel NULL pointer dereference, address: 0000000000000322 Call Trace: ? __die+0x23/0x70 ? page_fault_oops+0x171/0x4e0 ? exc_page_fault+0x7f/0x180 ? asm_exc_page_fault+0x26/0x30 ? tas2781_hda_bind+0x59/0x140 [snd_hda_scodec_tas2781_i2c] component_bind_all+0xf3/0x240 try_to_bring_up_aggregate_device+0x1c3/0x270 __component_add+0xbc/0x1a0 tas2781_hda_i2c_probe+0x289/0x3a0 [snd_hda_scodec_tas2781_i2c] i2c_device_probe+0x136/0x2e0 Fixes: 5be27f1e3ec9 ("ALSA: hda/tas2781: Add tas2781 HDA driver") Cc: stable@vger.kernel.org Signed-off-by: Gergo Koteles Link: https://lore.kernel.org/r/8b8ed2bd5f75fbb32e354a3226c2f966fa85b46b.1702156522.git.soyer@irl.hu Signed-off-by: Takashi Iwai --- sound/pci/hda/tas2781_hda_i2c.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/sound/pci/hda/tas2781_hda_i2c.c b/sound/pci/hda/tas2781_hda_i2c.c index fb802802939e..b42837105c22 100644 --- a/sound/pci/hda/tas2781_hda_i2c.c +++ b/sound/pci/hda/tas2781_hda_i2c.c @@ -612,9 +612,13 @@ static void tas2781_hda_unbind(struct device *dev, { struct tasdevice_priv *tas_priv = dev_get_drvdata(dev); struct hda_component *comps = master_data; + comps = &comps[tas_priv->index]; - if (comps[tas_priv->index].dev == dev) - memset(&comps[tas_priv->index], 0, sizeof(*comps)); + if (comps->dev == dev) { + comps->dev = NULL; + memset(comps->name, 0, sizeof(comps->name)); + comps->playback_hook = NULL; + } tasdevice_config_info_remove(tas_priv); tasdevice_dsp_remove(tas_priv); -- cgit v1.2.3 From 4a147af2081070218a4c66523c584e198994528e Mon Sep 17 00:00:00 2001 From: Kent Overstreet Date: Sun, 10 Dec 2023 12:21:42 -0500 Subject: bcachefs: Fix uninitialized var in bch2_journal_replay() Signed-off-by: Kent Overstreet --- fs/bcachefs/recovery.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/bcachefs/recovery.c b/fs/bcachefs/recovery.c index 770ced1c6285..c7d9074c82d9 100644 --- a/fs/bcachefs/recovery.c +++ b/fs/bcachefs/recovery.c @@ -144,7 +144,7 @@ static int bch2_journal_replay(struct bch_fs *c) u64 start_seq = c->journal_replay_seq_start; u64 end_seq = c->journal_replay_seq_start; size_t i; - int ret; + int ret = 0; move_gap(keys->d, keys->nr, keys->size, keys->gap, keys->nr); keys->gap = keys->nr; -- cgit v1.2.3 From 9fc95fe95c3e2a63ced8eeca4b256518ab204b63 Mon Sep 17 00:00:00 2001 From: Radu Bulie Date: Thu, 7 Dec 2023 16:38:01 +0800 Subject: net: fec: correct queue selection The old implementation extracted VLAN TCI info from the payload before the VLAN tag has been pushed in the payload. Another problem was that the VLAN TCI was extracted even if the packet did not have VLAN protocol header. This resulted in invalid VLAN TCI and as a consequence a random queue was computed. This patch fixes the above issues and use the VLAN TCI from the skb if it is present or VLAN TCI from payload if present. If no VLAN header is present queue 0 is selected. Fixes: 52c4a1a85f4b ("net: fec: add ndo_select_queue to fix TX bandwidth fluctuations") Signed-off-by: Radu Bulie Signed-off-by: Wei Fang Signed-off-by: David S. Miller --- drivers/net/ethernet/freescale/fec_main.c | 27 +++++++++++---------------- 1 file changed, 11 insertions(+), 16 deletions(-) diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c index c3b7694a7485..e08c7b572497 100644 --- a/drivers/net/ethernet/freescale/fec_main.c +++ b/drivers/net/ethernet/freescale/fec_main.c @@ -3731,31 +3731,26 @@ static int fec_set_features(struct net_device *netdev, return 0; } -static u16 fec_enet_get_raw_vlan_tci(struct sk_buff *skb) -{ - struct vlan_ethhdr *vhdr; - unsigned short vlan_TCI = 0; - - if (skb->protocol == htons(ETH_P_ALL)) { - vhdr = (struct vlan_ethhdr *)(skb->data); - vlan_TCI = ntohs(vhdr->h_vlan_TCI); - } - - return vlan_TCI; -} - static u16 fec_enet_select_queue(struct net_device *ndev, struct sk_buff *skb, struct net_device *sb_dev) { struct fec_enet_private *fep = netdev_priv(ndev); - u16 vlan_tag; + u16 vlan_tag = 0; if (!(fep->quirks & FEC_QUIRK_HAS_AVB)) return netdev_pick_tx(ndev, skb, NULL); - vlan_tag = fec_enet_get_raw_vlan_tci(skb); - if (!vlan_tag) + /* VLAN is present in the payload.*/ + if (eth_type_vlan(skb->protocol)) { + struct vlan_ethhdr *vhdr = skb_vlan_eth_hdr(skb); + + vlan_tag = ntohs(vhdr->h_vlan_TCI); + /* VLAN is present in the skb but not yet pushed in the payload.*/ + } else if (skb_vlan_tag_present(skb)) { + vlan_tag = skb->vlan_tci; + } else { return vlan_tag; + } return fec_enet_vlan_pri_to_queue[vlan_tag >> 13]; } -- cgit v1.2.3 From 28a7cb045ab700de5554193a1642917602787784 Mon Sep 17 00:00:00 2001 From: Zhipeng Lu Date: Thu, 7 Dec 2023 17:49:16 +0800 Subject: octeontx2-af: fix a use-after-free in rvu_nix_register_reporters The rvu_dl will be freed in rvu_nix_health_reporters_destroy(rvu_dl) after the create_workqueue fails, and after that free, the rvu_dl will be translate back through the following call chain: rvu_nix_health_reporters_destroy |-> rvu_nix_health_reporters_create |-> rvu_health_reporters_create |-> rvu_register_dl (label err_dl_health) Finally. in the err_dl_health label, rvu_dl being freed again in rvu_health_reporters_destroy(rvu) by rvu_nix_health_reporters_destroy. In the second calls of rvu_nix_health_reporters_destroy, however, it uses rvu_dl->rvu_nix_health_reporter, which is already freed at the end of rvu_nix_health_reporters_destroy in the first call. So this patch prevents the first destroy by instantly returning -ENONMEN when create_workqueue fails. In addition, since the failure of create_workqueue is the only entrence of label err, it has been integrated into the error-handling path of create_workqueue. Fixes: 5ed66306eab6 ("octeontx2-af: Add devlink health reporters for NIX") Signed-off-by: Zhipeng Lu Signed-off-by: David S. Miller --- drivers/net/ethernet/marvell/octeontx2/af/rvu_devlink.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu_devlink.c b/drivers/net/ethernet/marvell/octeontx2/af/rvu_devlink.c index 62780d8b4f9a..21b5d71c1e37 100644 --- a/drivers/net/ethernet/marvell/octeontx2/af/rvu_devlink.c +++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu_devlink.c @@ -538,7 +538,7 @@ static int rvu_nix_register_reporters(struct rvu_devlink *rvu_dl) rvu_dl->devlink_wq = create_workqueue("rvu_devlink_wq"); if (!rvu_dl->devlink_wq) - goto err; + return -ENOMEM; INIT_WORK(&rvu_reporters->intr_work, rvu_nix_intr_work); INIT_WORK(&rvu_reporters->gen_work, rvu_nix_gen_work); @@ -546,9 +546,6 @@ static int rvu_nix_register_reporters(struct rvu_devlink *rvu_dl) INIT_WORK(&rvu_reporters->ras_work, rvu_nix_ras_work); return 0; -err: - rvu_nix_health_reporters_destroy(rvu_dl); - return -ENOMEM; } static int rvu_nix_health_reporters_create(struct rvu_devlink *rvu_dl) -- cgit v1.2.3 From a66ff26b0f31189e413a87065c25949c359e4bef Mon Sep 17 00:00:00 2001 From: Kent Overstreet Date: Sun, 10 Dec 2023 15:23:27 -0500 Subject: bcachefs: Close journal entry if necessary when flushing all pins Since outstanding journal buffers hold a journal pin, when flushing all pins we need to close the current journal entry if necessary so its pin can be released. Signed-off-by: Kent Overstreet --- fs/bcachefs/journal.c | 8 ++++---- fs/bcachefs/journal.h | 1 + fs/bcachefs/journal_io.c | 1 + fs/bcachefs/journal_reclaim.c | 3 +++ 4 files changed, 9 insertions(+), 4 deletions(-) diff --git a/fs/bcachefs/journal.c b/fs/bcachefs/journal.c index 489b34046e78..8cf238be6213 100644 --- a/fs/bcachefs/journal.c +++ b/fs/bcachefs/journal.c @@ -249,7 +249,7 @@ static bool journal_entry_want_write(struct journal *j) return ret; } -static bool journal_entry_close(struct journal *j) +bool bch2_journal_entry_close(struct journal *j) { bool ret; @@ -383,7 +383,7 @@ static bool journal_quiesced(struct journal *j) bool ret = atomic64_read(&j->seq) == j->seq_ondisk; if (!ret) - journal_entry_close(j); + bch2_journal_entry_close(j); return ret; } @@ -436,7 +436,7 @@ retry: /* * Recheck after taking the lock, so we don't race with another thread - * that just did journal_entry_open() and call journal_entry_close() + * that just did journal_entry_open() and call bch2_journal_entry_close() * unnecessarily */ if (journal_res_get_fast(j, res, flags)) { @@ -1041,7 +1041,7 @@ void bch2_fs_journal_stop(struct journal *j) bch2_journal_reclaim_stop(j); bch2_journal_flush_all_pins(j); - wait_event(j->wait, journal_entry_close(j)); + wait_event(j->wait, bch2_journal_entry_close(j)); /* * Always write a new journal entry, to make sure the clock hands are up diff --git a/fs/bcachefs/journal.h b/fs/bcachefs/journal.h index 4c513fca5ef2..2f768e11aec9 100644 --- a/fs/bcachefs/journal.h +++ b/fs/bcachefs/journal.h @@ -266,6 +266,7 @@ static inline union journal_res_state journal_state_buf_put(struct journal *j, u return s; } +bool bch2_journal_entry_close(struct journal *); void bch2_journal_buf_put_final(struct journal *, u64, bool); static inline void __bch2_journal_buf_put(struct journal *j, unsigned idx, u64 seq) diff --git a/fs/bcachefs/journal_io.c b/fs/bcachefs/journal_io.c index 0f17fc5f8d68..5de1b68fb8af 100644 --- a/fs/bcachefs/journal_io.c +++ b/fs/bcachefs/journal_io.c @@ -1599,6 +1599,7 @@ static CLOSURE_CALLBACK(journal_write_done) } while ((v = atomic64_cmpxchg(&j->reservations.counter, old.v, new.v)) != old.v); + bch2_journal_reclaim_fast(j); bch2_journal_space_available(j); closure_wake_up(&w->wait); diff --git a/fs/bcachefs/journal_reclaim.c b/fs/bcachefs/journal_reclaim.c index e63c6eda86af..ec712104addb 100644 --- a/fs/bcachefs/journal_reclaim.c +++ b/fs/bcachefs/journal_reclaim.c @@ -776,6 +776,9 @@ static int journal_flush_done(struct journal *j, u64 seq_to_flush, (1U << JOURNAL_PIN_btree), 0, 0, 0)) *did_work = true; + if (seq_to_flush > journal_cur_seq(j)) + bch2_journal_entry_close(j); + spin_lock(&j->lock); /* * If journal replay hasn't completed, the unreplayed journal entries -- cgit v1.2.3 From a39b6ac3781d46ba18193c9dbb2110f31e9bffe9 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sun, 10 Dec 2023 14:33:40 -0800 Subject: Linux 6.7-rc5 --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index 511b5616aa41..70fc4c11dfc0 100644 --- a/Makefile +++ b/Makefile @@ -2,7 +2,7 @@ VERSION = 6 PATCHLEVEL = 7 SUBLEVEL = 0 -EXTRAVERSION = -rc4 +EXTRAVERSION = -rc5 NAME = Hurr durr I'ma ninja sloth # *DOCUMENTATION* -- cgit v1.2.3 From 778dfacc903d4b1ef5b7a9726e3a36bc15913d29 Mon Sep 17 00:00:00 2001 From: Guanjun Date: Mon, 11 Dec 2023 13:37:03 +0800 Subject: dmaengine: idxd: Protect int_handle field in hw descriptor The int_handle field in hw descriptor should also be protected by wmb() before possibly triggering a DMA read. Fixes: eb0cf33a91b4 (dmaengine: idxd: move interrupt handle assignment) Signed-off-by: Guanjun Reviewed-by: Dave Jiang Reviewed-by: Fenghua Yu Reviewed-by: Lijun Pan Link: https://lore.kernel.org/r/20231211053704.2725417-2-guanjun@linux.alibaba.com Signed-off-by: Vinod Koul --- drivers/dma/idxd/submit.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/drivers/dma/idxd/submit.c b/drivers/dma/idxd/submit.c index c01db23e3333..3f922518e3a5 100644 --- a/drivers/dma/idxd/submit.c +++ b/drivers/dma/idxd/submit.c @@ -182,13 +182,6 @@ int idxd_submit_desc(struct idxd_wq *wq, struct idxd_desc *desc) portal = idxd_wq_portal_addr(wq); - /* - * The wmb() flushes writes to coherent DMA data before - * possibly triggering a DMA read. The wmb() is necessary - * even on UP because the recipient is a device. - */ - wmb(); - /* * Pending the descriptor to the lockless list for the irq_entry * that we designated the descriptor to. @@ -199,6 +192,13 @@ int idxd_submit_desc(struct idxd_wq *wq, struct idxd_desc *desc) llist_add(&desc->llnode, &ie->pending_llist); } + /* + * The wmb() flushes writes to coherent DMA data before + * possibly triggering a DMA read. The wmb() is necessary + * even on UP because the recipient is a device. + */ + wmb(); + if (wq_dedicated(wq)) { iosubmit_cmds512(portal, desc->hw, 1); } else { -- cgit v1.2.3 From 0c154698a0fc32957d00c6009d5389e086dc8acf Mon Sep 17 00:00:00 2001 From: Guanjun Date: Mon, 11 Dec 2023 13:37:04 +0800 Subject: dmaengine: idxd: Fix incorrect descriptions for GRPCFG register Fix incorrect descriptions for the GRPCFG register which has three sub-registers (GRPWQCFG, GRPENGCFG and GRPFLGCFG). No functional changes Signed-off-by: Guanjun Reviewed-by: Dave Jiang Reviewed-by: Fenghua Yu Acked-by: Lijun Pan Link: https://lore.kernel.org/r/20231211053704.2725417-3-guanjun@linux.alibaba.com Signed-off-by: Vinod Koul --- drivers/dma/idxd/registers.h | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) diff --git a/drivers/dma/idxd/registers.h b/drivers/dma/idxd/registers.h index 7b54a3939ea1..315c004f58e4 100644 --- a/drivers/dma/idxd/registers.h +++ b/drivers/dma/idxd/registers.h @@ -440,12 +440,14 @@ union wqcfg { /* * This macro calculates the offset into the GRPCFG register * idxd - struct idxd * - * n - wq id - * ofs - the index of the 32b dword for the config register + * n - group id + * ofs - the index of the 64b qword for the config register * - * The WQCFG register block is divided into groups per each wq. The n index - * allows us to move to the register group that's for that particular wq. - * Each register is 32bits. The ofs gives us the number of register to access. + * The GRPCFG register block is divided into three sub-registers, which + * are GRPWQCFG, GRPENGCFG and GRPFLGCFG. The n index allows us to move + * to the register block that contains the three sub-registers. + * Each register block is 64bits. And the ofs gives us the offset + * within the GRPWQCFG register to access. */ #define GRPWQCFG_OFFSET(idxd_dev, n, ofs) ((idxd_dev)->grpcfg_offset +\ (n) * GRPCFG_SIZE + sizeof(u64) * (ofs)) -- cgit v1.2.3 From 33071422714a4c9587753b0ccc130ca59323bf42 Mon Sep 17 00:00:00 2001 From: Gergo Koteles Date: Mon, 11 Dec 2023 00:37:33 +0100 Subject: ALSA: hda/tas2781: handle missing EFI calibration data The code does not properly check whether the calibration variable is available in the EFI. If it is not available, it causes a NULL pointer dereference. Check the return value of the first get_variable call also. BUG: kernel NULL pointer dereference, address: 0000000000000000 Call Trace: ? __die+0x23/0x70 ? page_fault_oops+0x171/0x4e0 ? srso_alias_return_thunk+0x5/0x7f ? schedule+0x5e/0xd0 ? exc_page_fault+0x7f/0x180 ? asm_exc_page_fault+0x26/0x30 ? crc32_body+0x2c/0x120 ? tas2781_save_calibration+0xe4/0x220 [snd_hda_scodec_tas2781_i2c] tasdev_fw_ready+0x1af/0x280 [snd_hda_scodec_tas2781_i2c] request_firmware_work_func+0x59/0xa0 Fixes: 5be27f1e3ec9 ("ALSA: hda/tas2781: Add tas2781 HDA driver") CC: stable@vger.kernel.org Signed-off-by: Gergo Koteles Link: https://lore.kernel.org/r/f1f6583bda918f78556f67d522ca7b3b91cebbd5.1702251102.git.soyer@irl.hu Signed-off-by: Takashi Iwai --- sound/pci/hda/tas2781_hda_i2c.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/pci/hda/tas2781_hda_i2c.c b/sound/pci/hda/tas2781_hda_i2c.c index b42837105c22..d3dafc9d150b 100644 --- a/sound/pci/hda/tas2781_hda_i2c.c +++ b/sound/pci/hda/tas2781_hda_i2c.c @@ -455,9 +455,9 @@ static int tas2781_save_calibration(struct tasdevice_priv *tas_priv) status = efi.get_variable(efi_name, &efi_guid, &attr, &tas_priv->cali_data.total_sz, tas_priv->cali_data.data); - if (status != EFI_SUCCESS) - return -EINVAL; } + if (status != EFI_SUCCESS) + return -EINVAL; tmp_val = (unsigned int *)tas_priv->cali_data.data; -- cgit v1.2.3 From 35c49cfc8b702eda7a0d3f05497b16f81b69e289 Mon Sep 17 00:00:00 2001 From: Andrzej Kacprowski Date: Mon, 4 Dec 2023 13:23:31 +0100 Subject: accel/ivpu/37xx: Fix interrupt_clear_with_0 WA initialization Using PCI Device ID/Revision to initialize the interrupt_clear_with_0 workaround is problematic - there are many pre-production steppings with different behavior, even with the same PCI ID/Revision Instead of checking for PCI Device ID/Revision, check the VPU buttress interrupt status register behavior - if this register is not zero after writing 1s it means there register is RW instead of RW1C and we need to enable the interrupt_clear_with_0 workaround. Fixes: 7f34e01f77f8 ("accel/ivpu: Clear specific interrupt status bits on C0") Signed-off-by: Andrzej Kacprowski Signed-off-by: Jacek Lawrynowicz Reviewed-by: Jeffrey Hugo Link: https://lore.kernel.org/all/20231204122331.40560-1-jacek.lawrynowicz@linux.intel.com --- drivers/accel/ivpu/ivpu_hw_37xx.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) diff --git a/drivers/accel/ivpu/ivpu_hw_37xx.c b/drivers/accel/ivpu/ivpu_hw_37xx.c index 4ccf1994b97a..d530384f8d60 100644 --- a/drivers/accel/ivpu/ivpu_hw_37xx.c +++ b/drivers/accel/ivpu/ivpu_hw_37xx.c @@ -53,10 +53,12 @@ #define ICB_0_1_IRQ_MASK ((((u64)ICB_1_IRQ_MASK) << 32) | ICB_0_IRQ_MASK) -#define BUTTRESS_IRQ_MASK ((REG_FLD(VPU_37XX_BUTTRESS_INTERRUPT_STAT, FREQ_CHANGE)) | \ - (REG_FLD(VPU_37XX_BUTTRESS_INTERRUPT_STAT, ATS_ERR)) | \ +#define BUTTRESS_IRQ_MASK ((REG_FLD(VPU_37XX_BUTTRESS_INTERRUPT_STAT, ATS_ERR)) | \ (REG_FLD(VPU_37XX_BUTTRESS_INTERRUPT_STAT, UFI_ERR))) +#define BUTTRESS_ALL_IRQ_MASK (BUTTRESS_IRQ_MASK | \ + (REG_FLD(VPU_37XX_BUTTRESS_INTERRUPT_STAT, FREQ_CHANGE))) + #define BUTTRESS_IRQ_ENABLE_MASK ((u32)~BUTTRESS_IRQ_MASK) #define BUTTRESS_IRQ_DISABLE_MASK ((u32)-1) @@ -74,8 +76,12 @@ static void ivpu_hw_wa_init(struct ivpu_device *vdev) vdev->wa.clear_runtime_mem = false; vdev->wa.d3hot_after_power_off = true; - if (ivpu_device_id(vdev) == PCI_DEVICE_ID_MTL && ivpu_revision(vdev) < 4) + REGB_WR32(VPU_37XX_BUTTRESS_INTERRUPT_STAT, BUTTRESS_ALL_IRQ_MASK); + if (REGB_RD32(VPU_37XX_BUTTRESS_INTERRUPT_STAT) == BUTTRESS_ALL_IRQ_MASK) { + /* Writing 1s does not clear the interrupt status register */ vdev->wa.interrupt_clear_with_0 = true; + REGB_WR32(VPU_37XX_BUTTRESS_INTERRUPT_STAT, 0x0); + } IVPU_PRINT_WA(punit_disabled); IVPU_PRINT_WA(clear_runtime_mem); -- cgit v1.2.3 From 125f1c7f26ffcdbf96177abe75b70c1a6ceb17bc Mon Sep 17 00:00:00 2001 From: Vlad Buslov Date: Tue, 5 Dec 2023 18:25:54 +0100 Subject: net/sched: act_ct: Take per-cb reference to tcf_ct_flow_table The referenced change added custom cleanup code to act_ct to delete any callbacks registered on the parent block when deleting the tcf_ct_flow_table instance. However, the underlying issue is that the drivers don't obtain the reference to the tcf_ct_flow_table instance when registering callbacks which means that not only driver callbacks may still be on the table when deleting it but also that the driver can still have pointers to its internal nf_flowtable and can use it concurrently which results either warning in netfilter[0] or use-after-free. Fix the issue by taking a reference to the underlying struct tcf_ct_flow_table instance when registering the callback and release the reference when unregistering. Expose new API required for such reference counting by adding two new callbacks to nf_flowtable_type and implementing them for act_ct flowtable_ct type. This fixes the issue by extending the lifetime of nf_flowtable until all users have unregistered. [0]: [106170.938634] ------------[ cut here ]------------ [106170.939111] WARNING: CPU: 21 PID: 3688 at include/net/netfilter/nf_flow_table.h:262 mlx5_tc_ct_del_ft_cb+0x267/0x2b0 [mlx5_core] [106170.940108] Modules linked in: act_ct nf_flow_table act_mirred act_skbedit act_tunnel_key vxlan cls_matchall nfnetlink_cttimeout act_gact cls_flower sch_ingress mlx5_vdpa vringh vhost_iotlb vdpa bonding openvswitch nsh rpcrdma rdma_ucm ib_iser libiscsi scsi_transport_iscsi ib_umad rdma_cm ib_ipoib iw_cm ib_cm mlx5_ib ib_uverbs ib_core xt_MASQUERADE nf_conntrack_netlink nfnetlink iptable_nat xt_addrtype xt_conntrack nf_nat br_netfilter rpcsec_gss_krb5 auth_rpcgss oid_regis try overlay mlx5_core [106170.943496] CPU: 21 PID: 3688 Comm: kworker/u48:0 Not tainted 6.6.0-rc7_for_upstream_min_debug_2023_11_01_13_02 #1 [106170.944361] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [106170.945292] Workqueue: mlx5e mlx5e_rep_neigh_update [mlx5_core] [106170.945846] RIP: 0010:mlx5_tc_ct_del_ft_cb+0x267/0x2b0 [mlx5_core] [106170.946413] Code: 89 ef 48 83 05 71 a4 14 00 01 e8 f4 06 04 e1 48 83 05 6c a4 14 00 01 48 83 c4 28 5b 5d 41 5c 41 5d c3 48 83 05 d1 8b 14 00 01 <0f> 0b 48 83 05 d7 8b 14 00 01 e9 96 fe ff ff 48 83 05 a2 90 14 00 [106170.947924] RSP: 0018:ffff88813ff0fcb8 EFLAGS: 00010202 [106170.948397] RAX: 0000000000000000 RBX: ffff88811eabac40 RCX: ffff88811eabad48 [106170.949040] RDX: ffff88811eab8000 RSI: ffffffffa02cd560 RDI: 0000000000000000 [106170.949679] RBP: ffff88811eab8000 R08: 0000000000000001 R09: ffffffffa0229700 [106170.950317] R10: ffff888103538fc0 R11: 0000000000000001 R12: ffff88811eabad58 [106170.950969] R13: ffff888110c01c00 R14: ffff888106b40000 R15: 0000000000000000 [106170.951616] FS: 0000000000000000(0000) GS:ffff88885fd40000(0000) knlGS:0000000000000000 [106170.952329] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [106170.952834] CR2: 00007f1cefd28cb0 CR3: 000000012181b006 CR4: 0000000000370ea0 [106170.953482] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [106170.954121] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [106170.954766] Call Trace: [106170.955057] [106170.955315] ? __warn+0x79/0x120 [106170.955648] ? mlx5_tc_ct_del_ft_cb+0x267/0x2b0 [mlx5_core] [106170.956172] ? report_bug+0x17c/0x190 [106170.956537] ? handle_bug+0x3c/0x60 [106170.956891] ? exc_invalid_op+0x14/0x70 [106170.957264] ? asm_exc_invalid_op+0x16/0x20 [106170.957666] ? mlx5_del_flow_rules+0x10/0x310 [mlx5_core] [106170.958172] ? mlx5_tc_ct_block_flow_offload_add+0x1240/0x1240 [mlx5_core] [106170.958788] ? mlx5_tc_ct_del_ft_cb+0x267/0x2b0 [mlx5_core] [106170.959339] ? mlx5_tc_ct_del_ft_cb+0xc6/0x2b0 [mlx5_core] [106170.959854] ? mapping_remove+0x154/0x1d0 [mlx5_core] [106170.960342] ? mlx5e_tc_action_miss_mapping_put+0x4f/0x80 [mlx5_core] [106170.960927] mlx5_tc_ct_delete_flow+0x76/0xc0 [mlx5_core] [106170.961441] mlx5_free_flow_attr_actions+0x13b/0x220 [mlx5_core] [106170.962001] mlx5e_tc_del_fdb_flow+0x22c/0x3b0 [mlx5_core] [106170.962524] mlx5e_tc_del_flow+0x95/0x3c0 [mlx5_core] [106170.963034] mlx5e_flow_put+0x73/0xe0 [mlx5_core] [106170.963506] mlx5e_put_flow_list+0x38/0x70 [mlx5_core] [106170.964002] mlx5e_rep_update_flows+0xec/0x290 [mlx5_core] [106170.964525] mlx5e_rep_neigh_update+0x1da/0x310 [mlx5_core] [106170.965056] process_one_work+0x13a/0x2c0 [106170.965443] worker_thread+0x2e5/0x3f0 [106170.965808] ? rescuer_thread+0x410/0x410 [106170.966192] kthread+0xc6/0xf0 [106170.966515] ? kthread_complete_and_exit+0x20/0x20 [106170.966970] ret_from_fork+0x2d/0x50 [106170.967332] ? kthread_complete_and_exit+0x20/0x20 [106170.967774] ret_from_fork_asm+0x11/0x20 [106170.970466] [106170.970726] ---[ end trace 0000000000000000 ]--- Fixes: 77ac5e40c44e ("net/sched: act_ct: remove and free nf_table callbacks") Signed-off-by: Vlad Buslov Reviewed-by: Paul Blakey Acked-by: Pablo Neira Ayuso Signed-off-by: David S. Miller --- include/net/netfilter/nf_flow_table.h | 10 ++++++++++ net/sched/act_ct.c | 34 ++++++++++++++++++++++++++++------ 2 files changed, 38 insertions(+), 6 deletions(-) diff --git a/include/net/netfilter/nf_flow_table.h b/include/net/netfilter/nf_flow_table.h index fe1507c1db82..692d5955911c 100644 --- a/include/net/netfilter/nf_flow_table.h +++ b/include/net/netfilter/nf_flow_table.h @@ -62,6 +62,8 @@ struct nf_flowtable_type { enum flow_offload_tuple_dir dir, struct nf_flow_rule *flow_rule); void (*free)(struct nf_flowtable *ft); + void (*get)(struct nf_flowtable *ft); + void (*put)(struct nf_flowtable *ft); nf_hookfn *hook; struct module *owner; }; @@ -240,6 +242,11 @@ nf_flow_table_offload_add_cb(struct nf_flowtable *flow_table, } list_add_tail(&block_cb->list, &block->cb_list); + up_write(&flow_table->flow_block_lock); + + if (flow_table->type->get) + flow_table->type->get(flow_table); + return 0; unlock: up_write(&flow_table->flow_block_lock); @@ -262,6 +269,9 @@ nf_flow_table_offload_del_cb(struct nf_flowtable *flow_table, WARN_ON(true); } up_write(&flow_table->flow_block_lock); + + if (flow_table->type->put) + flow_table->type->put(flow_table); } void flow_offload_route_init(struct flow_offload *flow, diff --git a/net/sched/act_ct.c b/net/sched/act_ct.c index b3f4a503ee2b..f69c47945175 100644 --- a/net/sched/act_ct.c +++ b/net/sched/act_ct.c @@ -286,9 +286,31 @@ static bool tcf_ct_flow_is_outdated(const struct flow_offload *flow) !test_bit(NF_FLOW_HW_ESTABLISHED, &flow->flags); } +static void tcf_ct_flow_table_get_ref(struct tcf_ct_flow_table *ct_ft); + +static void tcf_ct_nf_get(struct nf_flowtable *ft) +{ + struct tcf_ct_flow_table *ct_ft = + container_of(ft, struct tcf_ct_flow_table, nf_ft); + + tcf_ct_flow_table_get_ref(ct_ft); +} + +static void tcf_ct_flow_table_put(struct tcf_ct_flow_table *ct_ft); + +static void tcf_ct_nf_put(struct nf_flowtable *ft) +{ + struct tcf_ct_flow_table *ct_ft = + container_of(ft, struct tcf_ct_flow_table, nf_ft); + + tcf_ct_flow_table_put(ct_ft); +} + static struct nf_flowtable_type flowtable_ct = { .gc = tcf_ct_flow_is_outdated, .action = tcf_ct_flow_table_fill_actions, + .get = tcf_ct_nf_get, + .put = tcf_ct_nf_put, .owner = THIS_MODULE, }; @@ -337,9 +359,13 @@ err_alloc: return err; } +static void tcf_ct_flow_table_get_ref(struct tcf_ct_flow_table *ct_ft) +{ + refcount_inc(&ct_ft->ref); +} + static void tcf_ct_flow_table_cleanup_work(struct work_struct *work) { - struct flow_block_cb *block_cb, *tmp_cb; struct tcf_ct_flow_table *ct_ft; struct flow_block *block; @@ -347,13 +373,9 @@ static void tcf_ct_flow_table_cleanup_work(struct work_struct *work) rwork); nf_flow_table_free(&ct_ft->nf_ft); - /* Remove any remaining callbacks before cleanup */ block = &ct_ft->nf_ft.flow_block; down_write(&ct_ft->nf_ft.flow_block_lock); - list_for_each_entry_safe(block_cb, tmp_cb, &block->cb_list, list) { - list_del(&block_cb->list); - flow_block_cb_free(block_cb); - } + WARN_ON(!list_empty(&block->cb_list)); up_write(&ct_ft->nf_ft.flow_block_lock); kfree(ct_ft); -- cgit v1.2.3 From 284f717622417cb267e344a9174f8e5698d1e3c1 Mon Sep 17 00:00:00 2001 From: Shinas Rasheed Date: Thu, 7 Dec 2023 21:56:46 -0800 Subject: octeon_ep: explicitly test for firmware ready value The firmware ready value is 1, and get firmware ready status function should explicitly test for that value. The firmware ready value read will be 2 after driver load, and on unbind till firmware rewrites the firmware ready back to 0, the value seen by driver will be 2, which should be regarded as not ready. Fixes: 10c073e40469 ("octeon_ep: defer probe if firmware not ready") Signed-off-by: Shinas Rasheed Reviewed-by: Simon Horman Signed-off-by: David S. Miller --- drivers/net/ethernet/marvell/octeon_ep/octep_main.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/marvell/octeon_ep/octep_main.c b/drivers/net/ethernet/marvell/octeon_ep/octep_main.c index a2b5a3f8df93..a9bdf3283a85 100644 --- a/drivers/net/ethernet/marvell/octeon_ep/octep_main.c +++ b/drivers/net/ethernet/marvell/octeon_ep/octep_main.c @@ -1265,7 +1265,8 @@ static bool get_fw_ready_status(struct pci_dev *pdev) pci_read_config_byte(pdev, (pos + 8), &status); dev_info(&pdev->dev, "Firmware ready status = %u\n", status); - return status; +#define FW_STATUS_READY 1ULL + return status == FW_STATUS_READY; } return false; } -- cgit v1.2.3 From dbda436824ded8ef6a05bb82cd9baa8d42377a49 Mon Sep 17 00:00:00 2001 From: Hariprasad Kelam Date: Fri, 8 Dec 2023 12:26:09 +0530 Subject: octeontx2-pf: Fix promisc mcam entry action Current implementation is such that, promisc mcam entry action is set as multicast even when there are no trusted VFs. multicast action causes the hardware to copy packet data, which reduces the performance. This patch fixes this issue by setting the promisc mcam entry action to unicast instead of multicast when there are no trusted VFs. The same change is made for the 'allmulti' mcam entry action. Fixes: ffd2f89ad05c ("octeontx2-pf: Enable promisc/allmulti match MCAM entries.") Signed-off-by: Hariprasad Kelam Signed-off-by: Sunil Kovvuri Goutham Signed-off-by: David S. Miller --- .../net/ethernet/marvell/octeontx2/nic/otx2_pf.c | 25 +++++++++++++++++++--- 1 file changed, 22 insertions(+), 3 deletions(-) diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c index 0c17ebdda148..a57455aebff6 100644 --- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c +++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c @@ -1650,6 +1650,21 @@ static void otx2_free_hw_resources(struct otx2_nic *pf) mutex_unlock(&mbox->lock); } +static bool otx2_promisc_use_mce_list(struct otx2_nic *pfvf) +{ + int vf; + + /* The AF driver will determine whether to allow the VF netdev or not */ + if (is_otx2_vf(pfvf->pcifunc)) + return true; + + /* check if there are any trusted VFs associated with the PF netdev */ + for (vf = 0; vf < pci_num_vf(pfvf->pdev); vf++) + if (pfvf->vf_configs[vf].trusted) + return true; + return false; +} + static void otx2_do_set_rx_mode(struct otx2_nic *pf) { struct net_device *netdev = pf->netdev; @@ -1682,7 +1697,8 @@ static void otx2_do_set_rx_mode(struct otx2_nic *pf) if (netdev->flags & (IFF_ALLMULTI | IFF_MULTICAST)) req->mode |= NIX_RX_MODE_ALLMULTI; - req->mode |= NIX_RX_MODE_USE_MCE; + if (otx2_promisc_use_mce_list(pf)) + req->mode |= NIX_RX_MODE_USE_MCE; otx2_sync_mbox_msg(&pf->mbox); mutex_unlock(&pf->mbox.lock); @@ -2691,11 +2707,14 @@ static int otx2_ndo_set_vf_trust(struct net_device *netdev, int vf, pf->vf_configs[vf].trusted = enable; rc = otx2_set_vf_permissions(pf, vf, OTX2_TRUSTED_VF); - if (rc) + if (rc) { pf->vf_configs[vf].trusted = !enable; - else + } else { netdev_info(pf->netdev, "VF %d is %strusted\n", vf, enable ? "" : "not "); + otx2_set_rx_mode(netdev); + } + return rc; } -- cgit v1.2.3 From 570ba37898ecd9069beb58bf0b6cf84daba6e0fe Mon Sep 17 00:00:00 2001 From: Hariprasad Kelam Date: Fri, 8 Dec 2023 12:26:10 +0530 Subject: octeontx2-af: Update RSS algorithm index The RSS flow algorithm is not set up correctly for promiscuous or all multi MCAM entries. This has an impact on flow distribution. This patch fixes the issue by updating flow algorithm index in above mentioned MCAM entries. Fixes: 967db3529eca ("octeontx2-af: add support for multicast/promisc packet replication feature") Signed-off-by: Hariprasad Kelam Signed-off-by: Sunil Kovvuri Goutham Signed-off-by: David S. Miller --- .../net/ethernet/marvell/octeontx2/af/rvu_npc.c | 55 +++++++++++++++++----- 1 file changed, 44 insertions(+), 11 deletions(-) diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc.c b/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc.c index f65805860c8d..0bcf3e559280 100644 --- a/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc.c +++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc.c @@ -671,6 +671,7 @@ void rvu_npc_install_promisc_entry(struct rvu *rvu, u16 pcifunc, int blkaddr, ucast_idx, index; struct nix_rx_action action = { 0 }; u64 relaxed_mask; + u8 flow_key_alg; if (!hw->cap.nix_rx_multicast && is_cgx_vf(rvu, pcifunc)) return; @@ -701,6 +702,8 @@ void rvu_npc_install_promisc_entry(struct rvu *rvu, u16 pcifunc, action.op = NIX_RX_ACTIONOP_UCAST; } + flow_key_alg = action.flow_key_alg; + /* RX_ACTION set to MCAST for CGX PF's */ if (hw->cap.nix_rx_multicast && pfvf->use_mce_list && is_pf_cgxmapped(rvu, rvu_get_pf(pcifunc))) { @@ -740,7 +743,7 @@ void rvu_npc_install_promisc_entry(struct rvu *rvu, u16 pcifunc, req.vf = pcifunc; req.index = action.index; req.match_id = action.match_id; - req.flow_key_alg = action.flow_key_alg; + req.flow_key_alg = flow_key_alg; rvu_mbox_handler_npc_install_flow(rvu, &req, &rsp); } @@ -854,6 +857,7 @@ void rvu_npc_install_allmulti_entry(struct rvu *rvu, u16 pcifunc, int nixlf, u8 mac_addr[ETH_ALEN] = { 0 }; struct nix_rx_action action = { 0 }; struct rvu_pfvf *pfvf; + u8 flow_key_alg; u16 vf_func; /* Only CGX PF/VF can add allmulticast entry */ @@ -888,6 +892,7 @@ void rvu_npc_install_allmulti_entry(struct rvu *rvu, u16 pcifunc, int nixlf, *(u64 *)&action = npc_get_mcam_action(rvu, mcam, blkaddr, ucast_idx); + flow_key_alg = action.flow_key_alg; if (action.op != NIX_RX_ACTIONOP_RSS) { *(u64 *)&action = 0; action.op = NIX_RX_ACTIONOP_UCAST; @@ -924,7 +929,7 @@ void rvu_npc_install_allmulti_entry(struct rvu *rvu, u16 pcifunc, int nixlf, req.vf = pcifunc | vf_func; req.index = action.index; req.match_id = action.match_id; - req.flow_key_alg = action.flow_key_alg; + req.flow_key_alg = flow_key_alg; rvu_mbox_handler_npc_install_flow(rvu, &req, &rsp); } @@ -990,11 +995,38 @@ static void npc_update_vf_flow_entry(struct rvu *rvu, struct npc_mcam *mcam, mutex_unlock(&mcam->lock); } +static void npc_update_rx_action_with_alg_idx(struct rvu *rvu, struct nix_rx_action action, + struct rvu_pfvf *pfvf, int mcam_index, int blkaddr, + int alg_idx) + +{ + struct npc_mcam *mcam = &rvu->hw->mcam; + struct rvu_hwinfo *hw = rvu->hw; + int bank, op_rss; + + if (!is_mcam_entry_enabled(rvu, mcam, blkaddr, mcam_index)) + return; + + op_rss = (!hw->cap.nix_rx_multicast || !pfvf->use_mce_list); + + bank = npc_get_bank(mcam, mcam_index); + mcam_index &= (mcam->banksize - 1); + + /* If Rx action is MCAST update only RSS algorithm index */ + if (!op_rss) { + *(u64 *)&action = rvu_read64(rvu, blkaddr, + NPC_AF_MCAMEX_BANKX_ACTION(mcam_index, bank)); + + action.flow_key_alg = alg_idx; + } + rvu_write64(rvu, blkaddr, + NPC_AF_MCAMEX_BANKX_ACTION(mcam_index, bank), *(u64 *)&action); +} + void rvu_npc_update_flowkey_alg_idx(struct rvu *rvu, u16 pcifunc, int nixlf, int group, int alg_idx, int mcam_index) { struct npc_mcam *mcam = &rvu->hw->mcam; - struct rvu_hwinfo *hw = rvu->hw; struct nix_rx_action action; int blkaddr, index, bank; struct rvu_pfvf *pfvf; @@ -1050,15 +1082,16 @@ void rvu_npc_update_flowkey_alg_idx(struct rvu *rvu, u16 pcifunc, int nixlf, /* If PF's promiscuous entry is enabled, * Set RSS action for that entry as well */ - if ((!hw->cap.nix_rx_multicast || !pfvf->use_mce_list) && - is_mcam_entry_enabled(rvu, mcam, blkaddr, index)) { - bank = npc_get_bank(mcam, index); - index &= (mcam->banksize - 1); + npc_update_rx_action_with_alg_idx(rvu, action, pfvf, index, blkaddr, + alg_idx); - rvu_write64(rvu, blkaddr, - NPC_AF_MCAMEX_BANKX_ACTION(index, bank), - *(u64 *)&action); - } + index = npc_get_nixlf_mcam_index(mcam, pcifunc, + nixlf, NIXLF_ALLMULTI_ENTRY); + /* If PF's allmulti entry is enabled, + * Set RSS action for that entry as well + */ + npc_update_rx_action_with_alg_idx(rvu, action, pfvf, index, blkaddr, + alg_idx); } void npc_enadis_default_mce_entry(struct rvu *rvu, u16 pcifunc, -- cgit v1.2.3 From 271f2a4a9576b87ed1f8584909d6d270039e52ea Mon Sep 17 00:00:00 2001 From: Wang Yao Date: Wed, 6 Dec 2023 08:24:27 +0800 Subject: efi/loongarch: Use load address to calculate kernel entry address The efi_relocate_kernel() may load the PIE kernel to anywhere, the loaded address may not be equal to link address or EFI_KIMG_PREFERRED_ADDRESS. Acked-by: Huacai Chen Signed-off-by: Wang Yao Signed-off-by: Ard Biesheuvel --- arch/loongarch/include/asm/efi.h | 2 +- drivers/firmware/efi/libstub/loongarch-stub.c | 4 ++-- drivers/firmware/efi/libstub/loongarch.c | 6 +++--- 3 files changed, 6 insertions(+), 6 deletions(-) diff --git a/arch/loongarch/include/asm/efi.h b/arch/loongarch/include/asm/efi.h index 091897d40b03..91d81f9730ab 100644 --- a/arch/loongarch/include/asm/efi.h +++ b/arch/loongarch/include/asm/efi.h @@ -32,6 +32,6 @@ static inline unsigned long efi_get_kimg_min_align(void) #define EFI_KIMG_PREFERRED_ADDRESS PHYSADDR(VMLINUX_LOAD_ADDRESS) -unsigned long kernel_entry_address(void); +unsigned long kernel_entry_address(unsigned long kernel_addr); #endif /* _ASM_LOONGARCH_EFI_H */ diff --git a/drivers/firmware/efi/libstub/loongarch-stub.c b/drivers/firmware/efi/libstub/loongarch-stub.c index 72c71ae201f0..d6ec5d4b8dbe 100644 --- a/drivers/firmware/efi/libstub/loongarch-stub.c +++ b/drivers/firmware/efi/libstub/loongarch-stub.c @@ -35,9 +35,9 @@ efi_status_t handle_kernel_image(unsigned long *image_addr, return status; } -unsigned long kernel_entry_address(void) +unsigned long kernel_entry_address(unsigned long kernel_addr) { unsigned long base = (unsigned long)&kernel_offset - kernel_offset; - return (unsigned long)&kernel_entry - base + VMLINUX_LOAD_ADDRESS; + return (unsigned long)&kernel_entry - base + kernel_addr; } diff --git a/drivers/firmware/efi/libstub/loongarch.c b/drivers/firmware/efi/libstub/loongarch.c index 807cba2693fc..0e0aa6cda73f 100644 --- a/drivers/firmware/efi/libstub/loongarch.c +++ b/drivers/firmware/efi/libstub/loongarch.c @@ -37,9 +37,9 @@ static efi_status_t exit_boot_func(struct efi_boot_memmap *map, void *priv) return EFI_SUCCESS; } -unsigned long __weak kernel_entry_address(void) +unsigned long __weak kernel_entry_address(unsigned long kernel_addr) { - return *(unsigned long *)(PHYSADDR(VMLINUX_LOAD_ADDRESS) + 8); + return *(unsigned long *)(kernel_addr + 8) - VMLINUX_LOAD_ADDRESS + kernel_addr; } efi_status_t efi_boot_kernel(void *handle, efi_loaded_image_t *image, @@ -73,7 +73,7 @@ efi_status_t efi_boot_kernel(void *handle, efi_loaded_image_t *image, csr_write64(CSR_DMW0_INIT, LOONGARCH_CSR_DMWIN0); csr_write64(CSR_DMW1_INIT, LOONGARCH_CSR_DMWIN1); - real_kernel_entry = (void *)kernel_entry_address(); + real_kernel_entry = (void *)kernel_entry_address(kernel_addr); real_kernel_entry(true, (unsigned long)cmdline_ptr, (unsigned long)efi_system_table); -- cgit v1.2.3 From e307b5a845c5951dabafc48d00b6424ee64716c4 Mon Sep 17 00:00:00 2001 From: Hariprasad Kelam Date: Fri, 8 Dec 2023 14:57:54 +0530 Subject: octeontx2-af: Fix pause frame configuration The current implementation's default Pause Forward setting is causing unnecessary network traffic. This patch disables Pause Forward to address this issue. Fixes: 1121f6b02e7a ("octeontx2-af: Priority flow control configuration support") Signed-off-by: Hariprasad Kelam Signed-off-by: Sunil Kovvuri Goutham Signed-off-by: David S. Miller --- drivers/net/ethernet/marvell/octeontx2/af/rpm.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rpm.c b/drivers/net/ethernet/marvell/octeontx2/af/rpm.c index af21e2030cff..4728ba34b0e3 100644 --- a/drivers/net/ethernet/marvell/octeontx2/af/rpm.c +++ b/drivers/net/ethernet/marvell/octeontx2/af/rpm.c @@ -373,6 +373,11 @@ void rpm_lmac_pause_frm_config(void *rpmd, int lmac_id, bool enable) cfg |= RPMX_MTI_MAC100X_COMMAND_CONFIG_TX_P_DISABLE; rpm_write(rpm, lmac_id, RPMX_MTI_MAC100X_COMMAND_CONFIG, cfg); + /* Disable forward pause to driver */ + cfg = rpm_read(rpm, lmac_id, RPMX_MTI_MAC100X_COMMAND_CONFIG); + cfg &= ~RPMX_MTI_MAC100X_COMMAND_CONFIG_PAUSE_FWD; + rpm_write(rpm, lmac_id, RPMX_MTI_MAC100X_COMMAND_CONFIG, cfg); + /* Enable channel mask for all LMACS */ if (is_dev_rpm2(rpm)) rpm_write(rpm, lmac_id, RPM2_CMR_CHAN_MSK_OR, 0xffff); @@ -616,12 +621,10 @@ int rpm_lmac_pfc_config(void *rpmd, int lmac_id, u8 tx_pause, u8 rx_pause, u16 p if (rx_pause) { cfg &= ~(RPMX_MTI_MAC100X_COMMAND_CONFIG_RX_P_DISABLE | - RPMX_MTI_MAC100X_COMMAND_CONFIG_PAUSE_IGNORE | - RPMX_MTI_MAC100X_COMMAND_CONFIG_PAUSE_FWD); + RPMX_MTI_MAC100X_COMMAND_CONFIG_PAUSE_IGNORE); } else { cfg |= (RPMX_MTI_MAC100X_COMMAND_CONFIG_RX_P_DISABLE | - RPMX_MTI_MAC100X_COMMAND_CONFIG_PAUSE_IGNORE | - RPMX_MTI_MAC100X_COMMAND_CONFIG_PAUSE_FWD); + RPMX_MTI_MAC100X_COMMAND_CONFIG_PAUSE_IGNORE); } if (tx_pause) { -- cgit v1.2.3 From 7c7c863bf89c5f76d8c7fda177a81559b61dc15b Mon Sep 17 00:00:00 2001 From: Tvrtko Ursulin Date: Fri, 1 Dec 2023 12:21:08 +0000 Subject: drm/i915/selftests: Fix engine reset count storage for multi-tile Engine->id namespace is per-tile so struct igt_live_test->reset_engine[] needs to be two-dimensional so engine reset counts from all tiles can be stored with no aliasing. With aliasing, if we had a real multi-tile platform, the reset counts would be incorrect for same engine instance on different tiles. Signed-off-by: Tvrtko Ursulin Fixes: 0c29efa23f5c ("drm/i915/selftests: Consider multi-gt instead of to_gt()") Reported-by: Alan Previn Teres Alexis Cc: Tejas Upadhyay Cc: Andi Shyti Cc: Daniele Ceraolo Spurio Reviewed-by: Andi Shyti Link: https://patchwork.freedesktop.org/patch/msgid/20231201122109.729006-1-tvrtko.ursulin@linux.intel.com (cherry picked from commit 0647ece3819b018cb62a71c3bcb7c2c3243e78ac) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/selftests/igt_live_test.c | 9 +++++---- drivers/gpu/drm/i915/selftests/igt_live_test.h | 3 ++- 2 files changed, 7 insertions(+), 5 deletions(-) diff --git a/drivers/gpu/drm/i915/selftests/igt_live_test.c b/drivers/gpu/drm/i915/selftests/igt_live_test.c index 4ddc6d902752..7d41874a49c5 100644 --- a/drivers/gpu/drm/i915/selftests/igt_live_test.c +++ b/drivers/gpu/drm/i915/selftests/igt_live_test.c @@ -37,8 +37,9 @@ int igt_live_test_begin(struct igt_live_test *t, } for_each_engine(engine, gt, id) - t->reset_engine[id] = - i915_reset_engine_count(&i915->gpu_error, engine); + t->reset_engine[i][id] = + i915_reset_engine_count(&i915->gpu_error, + engine); } t->reset_global = i915_reset_count(&i915->gpu_error); @@ -66,14 +67,14 @@ int igt_live_test_end(struct igt_live_test *t) for_each_gt(gt, i915, i) { for_each_engine(engine, gt, id) { - if (t->reset_engine[id] == + if (t->reset_engine[i][id] == i915_reset_engine_count(&i915->gpu_error, engine)) continue; gt_err(gt, "%s(%s): engine '%s' was reset %d times!\n", t->func, t->name, engine->name, i915_reset_engine_count(&i915->gpu_error, engine) - - t->reset_engine[id]); + t->reset_engine[i][id]); return -EIO; } } diff --git a/drivers/gpu/drm/i915/selftests/igt_live_test.h b/drivers/gpu/drm/i915/selftests/igt_live_test.h index 36ed42736c52..83e3ad430922 100644 --- a/drivers/gpu/drm/i915/selftests/igt_live_test.h +++ b/drivers/gpu/drm/i915/selftests/igt_live_test.h @@ -7,6 +7,7 @@ #ifndef IGT_LIVE_TEST_H #define IGT_LIVE_TEST_H +#include "gt/intel_gt_defines.h" /* for I915_MAX_GT */ #include "gt/intel_engine.h" /* for I915_NUM_ENGINES */ struct drm_i915_private; @@ -17,7 +18,7 @@ struct igt_live_test { const char *name; unsigned int reset_global; - unsigned int reset_engine[I915_NUM_ENGINES]; + unsigned int reset_engine[I915_MAX_GT][I915_NUM_ENGINES]; }; /* -- cgit v1.2.3 From 1f721a93a528268fa97875cff515d1fcb69f4f44 Mon Sep 17 00:00:00 2001 From: Tvrtko Ursulin Date: Fri, 1 Dec 2023 12:21:09 +0000 Subject: drm/i915: Use internal class when counting engine resets Commit 503579448db9 ("drm/i915/gsc: Mark internal GSC engine with reserved uabi class") made the GSC0 engine not have a valid uabi class and so broke the engine reset counting, which in turn was made class based in cb823ed9915b ("drm/i915/gt: Use intel_gt as the primary object for handling resets"). Despite the title and commit text of the latter is not mentioning it (and has left the storage array incorrectly sized), tracking by class, despite it adding aliasing in hypthotetical multi-tile systems, is handy for virtual engines which for instance do not have a valid engine->id. Therefore we keep that but just change it to use the internal class which is always valid. We also add a helper to increment the count, which aligns with the existing getter. What was broken without this fix were out of bounds reads every time a reset would happen on the GSC0 engine, or during selftests when storing and cross-checking the counts in igt_live_test_begin and igt_live_test_end. Signed-off-by: Tvrtko Ursulin Fixes: 503579448db9 ("drm/i915/gsc: Mark internal GSC engine with reserved uabi class") [tursulin: fixed Fixes tag] Reported-by: Alan Previn Teres Alexis Cc: Daniele Ceraolo Spurio Reviewed-by: Daniele Ceraolo Spurio Link: https://patchwork.freedesktop.org/patch/msgid/20231201122109.729006-2-tvrtko.ursulin@linux.intel.com (cherry picked from commit cf9cb028ac56696ff879af1154c4b2f0b12701fd) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/gt/intel_reset.c | 2 +- drivers/gpu/drm/i915/gt/uc/intel_guc_submission.c | 5 +++-- drivers/gpu/drm/i915/i915_gpu_error.h | 12 ++++++++++-- 3 files changed, 14 insertions(+), 5 deletions(-) diff --git a/drivers/gpu/drm/i915/gt/intel_reset.c b/drivers/gpu/drm/i915/gt/intel_reset.c index d5ed904f355d..6801f8b95c53 100644 --- a/drivers/gpu/drm/i915/gt/intel_reset.c +++ b/drivers/gpu/drm/i915/gt/intel_reset.c @@ -1293,7 +1293,7 @@ int __intel_engine_reset_bh(struct intel_engine_cs *engine, const char *msg) if (msg) drm_notice(&engine->i915->drm, "Resetting %s for %s\n", engine->name, msg); - atomic_inc(&engine->i915->gpu_error.reset_engine_count[engine->uabi_class]); + i915_increase_reset_engine_count(&engine->i915->gpu_error, engine); ret = intel_gt_reset_engine(engine); if (ret) { diff --git a/drivers/gpu/drm/i915/gt/uc/intel_guc_submission.c b/drivers/gpu/drm/i915/gt/uc/intel_guc_submission.c index d37698bd6b91..17df71117cc7 100644 --- a/drivers/gpu/drm/i915/gt/uc/intel_guc_submission.c +++ b/drivers/gpu/drm/i915/gt/uc/intel_guc_submission.c @@ -5001,7 +5001,8 @@ static void capture_error_state(struct intel_guc *guc, if (match) { intel_engine_set_hung_context(e, ce); engine_mask |= e->mask; - atomic_inc(&i915->gpu_error.reset_engine_count[e->uabi_class]); + i915_increase_reset_engine_count(&i915->gpu_error, + e); } } @@ -5013,7 +5014,7 @@ static void capture_error_state(struct intel_guc *guc, } else { intel_engine_set_hung_context(ce->engine, ce); engine_mask = ce->engine->mask; - atomic_inc(&i915->gpu_error.reset_engine_count[ce->engine->uabi_class]); + i915_increase_reset_engine_count(&i915->gpu_error, ce->engine); } with_intel_runtime_pm(&i915->runtime_pm, wakeref) diff --git a/drivers/gpu/drm/i915/i915_gpu_error.h b/drivers/gpu/drm/i915/i915_gpu_error.h index 9f5971f5e980..48f6c00402c4 100644 --- a/drivers/gpu/drm/i915/i915_gpu_error.h +++ b/drivers/gpu/drm/i915/i915_gpu_error.h @@ -16,6 +16,7 @@ #include "display/intel_display_device.h" #include "gt/intel_engine.h" +#include "gt/intel_engine_types.h" #include "gt/intel_gt_types.h" #include "gt/uc/intel_uc_fw.h" @@ -232,7 +233,7 @@ struct i915_gpu_error { atomic_t reset_count; /** Number of times an engine has been reset */ - atomic_t reset_engine_count[I915_NUM_ENGINES]; + atomic_t reset_engine_count[MAX_ENGINE_CLASS]; }; struct drm_i915_error_state_buf { @@ -255,7 +256,14 @@ static inline u32 i915_reset_count(struct i915_gpu_error *error) static inline u32 i915_reset_engine_count(struct i915_gpu_error *error, const struct intel_engine_cs *engine) { - return atomic_read(&error->reset_engine_count[engine->uabi_class]); + return atomic_read(&error->reset_engine_count[engine->class]); +} + +static inline void +i915_increase_reset_engine_count(struct i915_gpu_error *error, + const struct intel_engine_cs *engine) +{ + atomic_inc(&error->reset_engine_count[engine->class]); } #define CORE_DUMP_FLAG_NONE 0x0 -- cgit v1.2.3 From 0ccd963fe555451b1f84e6d14d2b3ef03dd5c947 Mon Sep 17 00:00:00 2001 From: Ville Syrjälä Date: Tue, 5 Dec 2023 20:03:08 +0200 Subject: drm/i915: Fix remapped stride with CCS on ADL+ MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit On ADL+ the hardware automagically calculates the CCS AUX surface stride from the main surface stride, so when remapping we can't really play a lot of tricks with the main surface stride, or else the AUX surface stride would get miscalculated and no longer match the actual data layout in memory. Supposedly we could remap in 256 main surface tile units (AUX page(4096)/cachline(64)*4(4x1 main surface tiles per AUX cacheline)=256 main surface tiles), but the extra complexity is probably not worth the hassle. So let's just make sure our mapping stride is calculated from the full framebuffer stride (instead of the framebuffer width). This way the stride we program into PLANE_STRIDE will be the original framebuffer stride, and thus there will be no change to the AUX stride/layout. Cc: stable@vger.kernel.org Cc: Imre Deak Cc: Juha-Pekka Heikkila Signed-off-by: Ville Syrjälä Link: https://patchwork.freedesktop.org/patch/msgid/20231205180308.7505-1-ville.syrjala@linux.intel.com Reviewed-by: Imre Deak (cherry picked from commit 2c12eb36f849256f5eb00ffaee9bf99396fd3814) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/display/intel_fb.c | 16 ++++++++++++++-- 1 file changed, 14 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/i915/display/intel_fb.c b/drivers/gpu/drm/i915/display/intel_fb.c index 19b35ece31f1..0dfc1b06255a 100644 --- a/drivers/gpu/drm/i915/display/intel_fb.c +++ b/drivers/gpu/drm/i915/display/intel_fb.c @@ -1501,8 +1501,20 @@ static u32 calc_plane_remap_info(const struct intel_framebuffer *fb, int color_p size += remap_info->size; } else { - unsigned int dst_stride = plane_view_dst_stride_tiles(fb, color_plane, - remap_info->width); + unsigned int dst_stride; + + /* + * The hardware automagically calculates the CCS AUX surface + * stride from the main surface stride so can't really remap a + * smaller subset (unless we'd remap in whole AUX page units). + */ + if (intel_fb_needs_pot_stride_remap(fb) && + intel_fb_is_ccs_modifier(fb->base.modifier)) + dst_stride = remap_info->src_stride; + else + dst_stride = remap_info->width; + + dst_stride = plane_view_dst_stride_tiles(fb, color_plane, dst_stride); assign_chk_ovf(i915, remap_info->dst_stride, dst_stride); color_plane_info->mapping_stride = dst_stride * -- cgit v1.2.3 From c3070f080f9ba18dea92eaa21730f7ab85b5c8f4 Mon Sep 17 00:00:00 2001 From: Ville Syrjälä Date: Thu, 7 Dec 2023 21:34:34 +0200 Subject: drm/i915: Fix intel_atomic_setup_scalers() plane_state handling MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Since the plane_state variable is declared outside the scaler_users loop in intel_atomic_setup_scalers(), and it's never reset back to NULL inside the loop we may end up calling intel_atomic_setup_scaler() with a non-NULL plane state for the pipe scaling case. That is bad because intel_atomic_setup_scaler() determines whether we are doing plane scaling or pipe scaling based on plane_state!=NULL. The end result is that we may miscalculate the scaler mode for pipe scaling. The hardware becomes somewhat upset if we end up in this situation when scanning out a planar format on a SDR plane. We end up programming the pipe scaler into planar mode as well, and the result is a screenfull of garbage. Fix the situation by making sure we pass the correct plane_state==NULL when calculating the scaler mode for pipe scaling. Cc: stable@vger.kernel.org Signed-off-by: Ville Syrjälä Link: https://patchwork.freedesktop.org/patch/msgid/20231207193441.20206-2-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula (cherry picked from commit e81144106e21271c619f0c722a09e27ccb8c043d) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/display/skl_scaler.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/display/skl_scaler.c b/drivers/gpu/drm/i915/display/skl_scaler.c index 1e7c97243fcf..8a934bada624 100644 --- a/drivers/gpu/drm/i915/display/skl_scaler.c +++ b/drivers/gpu/drm/i915/display/skl_scaler.c @@ -504,7 +504,6 @@ int intel_atomic_setup_scalers(struct drm_i915_private *dev_priv, { struct drm_plane *plane = NULL; struct intel_plane *intel_plane; - struct intel_plane_state *plane_state = NULL; struct intel_crtc_scaler_state *scaler_state = &crtc_state->scaler_state; struct drm_atomic_state *drm_state = crtc_state->uapi.state; @@ -536,6 +535,7 @@ int intel_atomic_setup_scalers(struct drm_i915_private *dev_priv, /* walkthrough scaler_users bits and start assigning scalers */ for (i = 0; i < sizeof(scaler_state->scaler_users) * 8; i++) { + struct intel_plane_state *plane_state = NULL; int *scaler_id; const char *name; int idx, ret; -- cgit v1.2.3 From 324b70e997aab0a7deab8cb90711faccda4e98c8 Mon Sep 17 00:00:00 2001 From: Ville Syrjälä Date: Mon, 4 Dec 2023 22:24:43 +0200 Subject: drm/i915: Fix ADL+ tiled plane stride when the POT stride is smaller than the original MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit plane_view_scanout_stride() currently assumes that we had to pad the mapping stride with dummy pages in order to align it. But that is not the case if the original fb stride exceeds the aligned stride used to populate the remapped view, which is calculated from the user specified framebuffer width rather than the user specified framebuffer stride. Ignore the original fb stride in this case and just stick to the POT aligned stride. Getting this wrong will cause the plane to fetch the wrong data, and can lead to fault errors if the page tables at the bogus location aren't even populated. TODO: figure out if this is OK for CCS, or if we should instead increase the width of the view to cover the entire user specified fb stride instead... Cc: Imre Deak Cc: Juha-Pekka Heikkila Signed-off-by: Ville Syrjälä Link: https://patchwork.freedesktop.org/patch/msgid/20231204202443.31247-1-ville.syrjala@linux.intel.com Reviewed-by: Imre Deak Reviewed-by: Juha-Pekka Heikkila (cherry picked from commit 01a39f1c4f1220a4e6a25729fae87ff5794cbc52) Cc: stable@vger.kernel.org Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/display/intel_fb.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/display/intel_fb.c b/drivers/gpu/drm/i915/display/intel_fb.c index 0dfc1b06255a..646f367a13f5 100644 --- a/drivers/gpu/drm/i915/display/intel_fb.c +++ b/drivers/gpu/drm/i915/display/intel_fb.c @@ -1374,7 +1374,8 @@ plane_view_scanout_stride(const struct intel_framebuffer *fb, int color_plane, struct drm_i915_private *i915 = to_i915(fb->base.dev); unsigned int stride_tiles; - if (IS_ALDERLAKE_P(i915) || DISPLAY_VER(i915) >= 14) + if ((IS_ALDERLAKE_P(i915) || DISPLAY_VER(i915) >= 14) && + src_stride_tiles < dst_stride_tiles) stride_tiles = src_stride_tiles; else stride_tiles = dst_stride_tiles; -- cgit v1.2.3 From e6861d8264cd43c5eb20196e53df36fd71ec5698 Mon Sep 17 00:00:00 2001 From: Jani Nikula Date: Tue, 5 Dec 2023 20:05:51 +0200 Subject: drm/i915/edp: don't write to DP_LINK_BW_SET when using rate select MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The eDP 1.5 spec adds a clarification for eDP 1.4x: > For eDP v1.4x, if the Source device chooses the Main-Link rate by way > of DPCD 00100h, the Sink device shall ignore DPCD 00115h[2:0]. We write 0 to DP_LINK_BW_SET (DPCD 100h) even when using DP_LINK_RATE_SET (DPCD 114h). Stop doing that, as it can cause the panel to ignore the rate set method. Moreover, 0 is a reserved value for DP_LINK_BW_SET, and should not be used. v2: Improve the comments (Ville) Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/9081 Tested-by: Animesh Manna Reviewed-by: Uma Shankar Cc: Ville Syrjälä Signed-off-by: Jani Nikula Link: https://patchwork.freedesktop.org/patch/msgid/20231205180551.2476228-1-jani.nikula@intel.com (cherry picked from commit 23b392b94acb0499f69706c5808c099f590ebcf4) Cc: stable@vger.kernel.org Signed-off-by: Jani Nikula --- .../gpu/drm/i915/display/intel_dp_link_training.c | 31 +++++++++++++++------- 1 file changed, 21 insertions(+), 10 deletions(-) diff --git a/drivers/gpu/drm/i915/display/intel_dp_link_training.c b/drivers/gpu/drm/i915/display/intel_dp_link_training.c index dbc1b66c8ee4..1abfafbbfa75 100644 --- a/drivers/gpu/drm/i915/display/intel_dp_link_training.c +++ b/drivers/gpu/drm/i915/display/intel_dp_link_training.c @@ -650,19 +650,30 @@ intel_dp_update_link_bw_set(struct intel_dp *intel_dp, const struct intel_crtc_state *crtc_state, u8 link_bw, u8 rate_select) { - u8 link_config[2]; + u8 lane_count = crtc_state->lane_count; - /* Write the link configuration data */ - link_config[0] = link_bw; - link_config[1] = crtc_state->lane_count; if (crtc_state->enhanced_framing) - link_config[1] |= DP_LANE_COUNT_ENHANCED_FRAME_EN; - drm_dp_dpcd_write(&intel_dp->aux, DP_LINK_BW_SET, link_config, 2); + lane_count |= DP_LANE_COUNT_ENHANCED_FRAME_EN; + + if (link_bw) { + /* DP and eDP v1.3 and earlier link bw set method. */ + u8 link_config[] = { link_bw, lane_count }; - /* eDP 1.4 rate select method. */ - if (!link_bw) - drm_dp_dpcd_write(&intel_dp->aux, DP_LINK_RATE_SET, - &rate_select, 1); + drm_dp_dpcd_write(&intel_dp->aux, DP_LINK_BW_SET, link_config, + ARRAY_SIZE(link_config)); + } else { + /* + * eDP v1.4 and later link rate set method. + * + * eDP v1.4x sinks shall ignore DP_LINK_RATE_SET if + * DP_LINK_BW_SET is set. Avoid writing DP_LINK_BW_SET. + * + * eDP v1.5 sinks allow choosing either, and the last choice + * shall be active. + */ + drm_dp_dpcd_writeb(&intel_dp->aux, DP_LANE_COUNT_SET, lane_count); + drm_dp_dpcd_writeb(&intel_dp->aux, DP_LINK_RATE_SET, rate_select); + } } /* -- cgit v1.2.3 From bffa7218dcddb80e7f18dfa545dd4b359b11dd93 Mon Sep 17 00:00:00 2001 From: Yang Yingliang Date: Wed, 29 Nov 2023 17:00:00 +0800 Subject: dmaengine: fsl-edma: fix wrong pointer check in fsl_edma3_attach_pd() device_link_add() returns NULL pointer not PTR_ERR() when it fails, so replace the IS_ERR() check with NULL pointer check. Fixes: 72f5801a4e2b ("dmaengine: fsl-edma: integrate v3 support") Signed-off-by: Yang Yingliang Link: https://lore.kernel.org/r/20231129090000.841440-1-yangyingliang@huaweicloud.com Signed-off-by: Vinod Koul --- drivers/dma/fsl-edma-main.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/dma/fsl-edma-main.c b/drivers/dma/fsl-edma-main.c index aea7a703dda7..238a69bd0d6f 100644 --- a/drivers/dma/fsl-edma-main.c +++ b/drivers/dma/fsl-edma-main.c @@ -396,9 +396,8 @@ static int fsl_edma3_attach_pd(struct platform_device *pdev, struct fsl_edma_eng link = device_link_add(dev, pd_chan, DL_FLAG_STATELESS | DL_FLAG_PM_RUNTIME | DL_FLAG_RPM_ACTIVE); - if (IS_ERR(link)) { - dev_err(dev, "Failed to add device_link to %d: %ld\n", i, - PTR_ERR(link)); + if (!link) { + dev_err(dev, "Failed to add device_link to %d\n", i); return -EINVAL; } -- cgit v1.2.3 From 759f14e20891de72e676d9d738eb2c573aa15f52 Mon Sep 17 00:00:00 2001 From: Jani Nikula Date: Thu, 7 Dec 2023 11:38:21 +0200 Subject: drm/edid: also call add modes in EDID connector update fallback MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit When the separate add modes call was added back in commit c533b5167c7e ("drm/edid: add separate drm_edid_connector_add_modes()"), it failed to address drm_edid_override_connector_update(). Also call add modes there. Reported-by: bbaa Closes: https://lore.kernel.org/r/930E9B4C7D91FDFF+29b34d89-8658-4910-966a-c772f320ea03@bbaa.fun Fixes: c533b5167c7e ("drm/edid: add separate drm_edid_connector_add_modes()") Cc: # v6.3+ Signed-off-by: Jani Nikula Reviewed-by: Ville Syrjälä Link: https://patchwork.freedesktop.org/patch/msgid/20231207093821.2654267-1-jani.nikula@intel.com --- drivers/gpu/drm/drm_edid.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c index 39db08f803ea..3b4065099872 100644 --- a/drivers/gpu/drm/drm_edid.c +++ b/drivers/gpu/drm/drm_edid.c @@ -2309,7 +2309,8 @@ int drm_edid_override_connector_update(struct drm_connector *connector) override = drm_edid_override_get(connector); if (override) { - num_modes = drm_edid_connector_update(connector, override); + if (drm_edid_connector_update(connector, override) == 0) + num_modes = drm_edid_connector_add_modes(connector); drm_edid_free(override); -- cgit v1.2.3 From b6961d187fcd138981b8707dac87b9fcdbfe75d1 Mon Sep 17 00:00:00 2001 From: Stuart Lee Date: Fri, 10 Nov 2023 09:29:14 +0800 Subject: drm/mediatek: Fix access violation in mtk_drm_crtc_dma_dev_get Add error handling to check NULL input in mtk_drm_crtc_dma_dev_get function. While display path is not configured correctly, none of crtc is established. So the caller of mtk_drm_crtc_dma_dev_get may pass input parameter *crtc as NULL, Which may cause coredump when we try to get the container of NULL pointer. Fixes: cb1d6bcca542 ("drm/mediatek: Add dma dev get function") Signed-off-by: Stuart Lee Cc: stable@vger.kernel.org Reviewed-by: AngeloGioacchino DEl Regno Tested-by: Macpaul Lin Link: https://patchwork.kernel.org/project/dri-devel/patch/20231110012914.14884-2-stuart.lee@mediatek.com/ Signed-off-by: Chun-Kuang Hu --- drivers/gpu/drm/mediatek/mtk_drm_crtc.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c index 0a7d60c191b8..db43f9dff912 100644 --- a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c +++ b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c @@ -926,7 +926,14 @@ static int mtk_drm_crtc_init_comp_planes(struct drm_device *drm_dev, struct device *mtk_drm_crtc_dma_dev_get(struct drm_crtc *crtc) { - struct mtk_drm_crtc *mtk_crtc = to_mtk_crtc(crtc); + struct mtk_drm_crtc *mtk_crtc = NULL; + + if (!crtc) + return NULL; + + mtk_crtc = to_mtk_crtc(crtc); + if (!mtk_crtc) + return NULL; return mtk_crtc->dma_dev; } -- cgit v1.2.3 From 4ee632c82d2dbb9e2dcc816890ef182a151cbd99 Mon Sep 17 00:00:00 2001 From: Frank Li Date: Mon, 27 Nov 2023 16:43:25 -0500 Subject: dmaengine: fsl-edma: fix DMA channel leak in eDMAv4 Allocate channel count consistently increases due to a missing source ID (srcid) cleanup in the fsl_edma_free_chan_resources() function at imx93 eDMAv4. Reset 'srcid' at fsl_edma_free_chan_resources(). Cc: stable@vger.kernel.org Fixes: 72f5801a4e2b ("dmaengine: fsl-edma: integrate v3 support") Signed-off-by: Frank Li Link: https://lore.kernel.org/r/20231127214325.2477247-1-Frank.Li@nxp.com Signed-off-by: Vinod Koul --- drivers/dma/fsl-edma-common.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/dma/fsl-edma-common.c b/drivers/dma/fsl-edma-common.c index 6a3abe5b1790..b53f46245c37 100644 --- a/drivers/dma/fsl-edma-common.c +++ b/drivers/dma/fsl-edma-common.c @@ -828,6 +828,7 @@ void fsl_edma_free_chan_resources(struct dma_chan *chan) dma_pool_destroy(fsl_chan->tcd_pool); fsl_chan->tcd_pool = NULL; fsl_chan->is_sw = false; + fsl_chan->srcid = 0; } void fsl_edma_cleanup_vchan(struct dma_device *dmadev) -- cgit v1.2.3 From 50d7cdf7a9b1ab6f4f74a69c84e974d5dc0c1bf1 Mon Sep 17 00:00:00 2001 From: Ard Biesheuvel Date: Mon, 11 Dec 2023 10:00:57 +0100 Subject: efi/x86: Avoid physical KASLR on older Dell systems River reports boot hangs with v6.6 and v6.7, and the bisect points to commit a1b87d54f4e4 ("x86/efistub: Avoid legacy decompressor when doing EFI boot") which moves the memory allocation and kernel decompression from the legacy decompressor (which executes *after* ExitBootServices()) to the EFI stub, using boot services for allocating the memory. The memory allocation succeeds but the subsequent call to decompress_kernel() never returns, resulting in a failed boot and a hanging system. As it turns out, this issue only occurs when physical address randomization (KASLR) is enabled, and given that this is a feature we can live without (virtual KASLR is much more important), let's disable the physical part of KASLR when booting on AMI UEFI firmware claiming to implement revision v2.0 of the specification (which was released in 2006), as this is the version these systems advertise. Fixes: a1b87d54f4e4 ("x86/efistub: Avoid legacy decompressor when doing EFI boot") Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218173 Signed-off-by: Ard Biesheuvel --- drivers/firmware/efi/libstub/x86-stub.c | 31 ++++++++++++++++++++++++------- 1 file changed, 24 insertions(+), 7 deletions(-) diff --git a/drivers/firmware/efi/libstub/x86-stub.c b/drivers/firmware/efi/libstub/x86-stub.c index 1bfdae34df39..da9b7b8d0716 100644 --- a/drivers/firmware/efi/libstub/x86-stub.c +++ b/drivers/firmware/efi/libstub/x86-stub.c @@ -307,17 +307,20 @@ static void setup_unaccepted_memory(void) efi_err("Memory acceptance protocol failed\n"); } +static efi_char16_t *efistub_fw_vendor(void) +{ + unsigned long vendor = efi_table_attr(efi_system_table, fw_vendor); + + return (efi_char16_t *)vendor; +} + static const efi_char16_t apple[] = L"Apple"; static void setup_quirks(struct boot_params *boot_params) { - efi_char16_t *fw_vendor = (efi_char16_t *)(unsigned long) - efi_table_attr(efi_system_table, fw_vendor); - - if (!memcmp(fw_vendor, apple, sizeof(apple))) { - if (IS_ENABLED(CONFIG_APPLE_PROPERTIES)) - retrieve_apple_device_properties(boot_params); - } + if (IS_ENABLED(CONFIG_APPLE_PROPERTIES) && + !memcmp(efistub_fw_vendor(), apple, sizeof(apple))) + retrieve_apple_device_properties(boot_params); } /* @@ -765,11 +768,25 @@ static efi_status_t efi_decompress_kernel(unsigned long *kernel_entry) if (IS_ENABLED(CONFIG_RANDOMIZE_BASE) && !efi_nokaslr) { u64 range = KERNEL_IMAGE_SIZE - LOAD_PHYSICAL_ADDR - kernel_total_size; + static const efi_char16_t ami[] = L"American Megatrends"; efi_get_seed(seed, sizeof(seed)); virt_addr += (range * seed[1]) >> 32; virt_addr &= ~(CONFIG_PHYSICAL_ALIGN - 1); + + /* + * Older Dell systems with AMI UEFI firmware v2.0 may hang + * while decompressing the kernel if physical address + * randomization is enabled. + * + * https://bugzilla.kernel.org/show_bug.cgi?id=218173 + */ + if (efi_system_table->hdr.revision <= EFI_2_00_SYSTEM_TABLE_REVISION && + !memcmp(efistub_fw_vendor(), ami, sizeof(ami))) { + efi_debug("AMI firmware v2.0 or older detected - disabling physical KASLR\n"); + seed[0] = 0; + } } status = efi_random_alloc(alloc_size, CONFIG_PHYSICAL_ALIGN, &addr, -- cgit v1.2.3 From 9fd2fbaabdb9dba947d1c14e5f4f217bc21afc34 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Mon, 11 Dec 2023 11:28:30 -0500 Subject: drm/amdgpu: fix buffer funcs setting order on suspend harder Part of commit dab96d8b61aa ("drm/amdgpu: fix buffer funcs setting order on suspend") got dropped accidently. Add it back. Fixes: dab96d8b61aa ("drm/amdgpu: fix buffer funcs setting order on suspend") Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu_device.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c index 1f64d8cbb14d..8dee52ce26d0 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c @@ -4516,8 +4516,6 @@ int amdgpu_device_suspend(struct drm_device *dev, bool fbcon) amdgpu_ras_suspend(adev); - amdgpu_ttm_set_buffer_funcs_status(adev, false); - amdgpu_device_ip_suspend_phase1(adev); if (!adev->in_s0ix) -- cgit v1.2.3 From dbfbf4740e40fbd39ceeb5c42ab301ac2edd7a9f Mon Sep 17 00:00:00 2001 From: Dmitrii Galantsev Date: Wed, 6 Dec 2023 02:04:52 -0600 Subject: drm/amd/pm: fix pp_*clk_od typo Fix pp_dpm_sclk_od and pp_dpm_mclk_od typos. Those were defined as pp_*clk_od but used as pp_dpm_*clk_od instead. This change removes the _dpm part. Fixes: 8cfd6a05750c ("drm/amd/pm: Hide irrelevant pm device attributes") Signed-off-by: Dmitrii Galantsev Reviewed-by: Lijo Lazar Reviewed-by: Alex Deucher Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/pm/amdgpu_pm.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/amd/pm/amdgpu_pm.c b/drivers/gpu/drm/amd/pm/amdgpu_pm.c index ca2ece24e1e0..49028dde0f87 100644 --- a/drivers/gpu/drm/amd/pm/amdgpu_pm.c +++ b/drivers/gpu/drm/amd/pm/amdgpu_pm.c @@ -2198,10 +2198,10 @@ static int default_attr_update(struct amdgpu_device *adev, struct amdgpu_device_ } else if (DEVICE_ATTR_IS(xgmi_plpd_policy)) { if (amdgpu_dpm_get_xgmi_plpd_mode(adev, NULL) == XGMI_PLPD_NONE) *states = ATTR_STATE_UNSUPPORTED; - } else if (DEVICE_ATTR_IS(pp_dpm_mclk_od)) { + } else if (DEVICE_ATTR_IS(pp_mclk_od)) { if (amdgpu_dpm_get_mclk_od(adev) == -EOPNOTSUPP) *states = ATTR_STATE_UNSUPPORTED; - } else if (DEVICE_ATTR_IS(pp_dpm_sclk_od)) { + } else if (DEVICE_ATTR_IS(pp_sclk_od)) { if (amdgpu_dpm_get_sclk_od(adev) == -EOPNOTSUPP) *states = ATTR_STATE_UNSUPPORTED; } else if (DEVICE_ATTR_IS(apu_thermal_cap)) { -- cgit v1.2.3 From f528ee145bd0076cd0ed7e7b2d435893e6329e98 Mon Sep 17 00:00:00 2001 From: Hamza Mahfooz Date: Tue, 5 Dec 2023 14:55:04 -0500 Subject: drm/amd/display: fix hw rotated modes when PSR-SU is enabled We currently don't support dirty rectangles on hardware rotated modes. So, if a user is using hardware rotated modes with PSR-SU enabled, use PSR-SU FFU for all rotated planes (including cursor planes). Cc: stable@vger.kernel.org Fixes: 30ebe41582d1 ("drm/amd/display: add FB_DAMAGE_CLIPS support") Reported-by: Kai-Heng Feng Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/2952 Tested-by: Kai-Heng Feng Tested-by: Bin Li Reviewed-by: Mario Limonciello Signed-off-by: Hamza Mahfooz Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 3 +++ drivers/gpu/drm/amd/display/dc/dc_hw_types.h | 1 + drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hubp.c | 12 ++++++++++-- drivers/gpu/drm/amd/display/dc/hwss/dcn10/dcn10_hwseq.c | 3 ++- 4 files changed, 16 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c index b452796fc6d3..c8c00c2a5224 100644 --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c @@ -5182,6 +5182,9 @@ static void fill_dc_dirty_rects(struct drm_plane *plane, if (plane->type == DRM_PLANE_TYPE_CURSOR) return; + if (new_plane_state->rotation != DRM_MODE_ROTATE_0) + goto ffu; + num_clips = drm_plane_get_damage_clips_count(new_plane_state); clips = drm_plane_get_damage_clips(new_plane_state); diff --git a/drivers/gpu/drm/amd/display/dc/dc_hw_types.h b/drivers/gpu/drm/amd/display/dc/dc_hw_types.h index 9649934ea186..e2a3aa8812df 100644 --- a/drivers/gpu/drm/amd/display/dc/dc_hw_types.h +++ b/drivers/gpu/drm/amd/display/dc/dc_hw_types.h @@ -465,6 +465,7 @@ struct dc_cursor_mi_param { struct fixed31_32 v_scale_ratio; enum dc_rotation_angle rotation; bool mirror; + struct dc_stream_state *stream; }; /* IPP related types */ diff --git a/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hubp.c b/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hubp.c index 139cf31d2e45..89c3bf0fe0c9 100644 --- a/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hubp.c +++ b/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hubp.c @@ -1077,8 +1077,16 @@ void hubp2_cursor_set_position( if (src_y_offset < 0) src_y_offset = 0; /* Save necessary cursor info x, y position. w, h is saved in attribute func. */ - hubp->cur_rect.x = src_x_offset + param->viewport.x; - hubp->cur_rect.y = src_y_offset + param->viewport.y; + if (param->stream->link->psr_settings.psr_version >= DC_PSR_VERSION_SU_1 && + param->rotation != ROTATION_ANGLE_0) { + hubp->cur_rect.x = 0; + hubp->cur_rect.y = 0; + hubp->cur_rect.w = param->stream->timing.h_addressable; + hubp->cur_rect.h = param->stream->timing.v_addressable; + } else { + hubp->cur_rect.x = src_x_offset + param->viewport.x; + hubp->cur_rect.y = src_y_offset + param->viewport.y; + } } void hubp2_clk_cntl(struct hubp *hubp, bool enable) diff --git a/drivers/gpu/drm/amd/display/dc/hwss/dcn10/dcn10_hwseq.c b/drivers/gpu/drm/amd/display/dc/hwss/dcn10/dcn10_hwseq.c index 2b8b8366538e..cdb903116eb7 100644 --- a/drivers/gpu/drm/amd/display/dc/hwss/dcn10/dcn10_hwseq.c +++ b/drivers/gpu/drm/amd/display/dc/hwss/dcn10/dcn10_hwseq.c @@ -3417,7 +3417,8 @@ void dcn10_set_cursor_position(struct pipe_ctx *pipe_ctx) .h_scale_ratio = pipe_ctx->plane_res.scl_data.ratios.horz, .v_scale_ratio = pipe_ctx->plane_res.scl_data.ratios.vert, .rotation = pipe_ctx->plane_state->rotation, - .mirror = pipe_ctx->plane_state->horizontal_mirror + .mirror = pipe_ctx->plane_state->horizontal_mirror, + .stream = pipe_ctx->stream, }; bool pipe_split_on = false; bool odm_combine_on = (pipe_ctx->next_odm_pipe != NULL) || -- cgit v1.2.3 From b96ab339ee50470d13a1faa6ad94d2218a7cd49f Mon Sep 17 00:00:00 2001 From: Mario Limonciello Date: Wed, 6 Dec 2023 12:08:26 -0600 Subject: drm/amd/display: Restore guard against default backlight value < 1 nit Mark reports that brightness is not restored after Xorg dpms screen blank. This behavior was introduced by commit d9e865826c20 ("drm/amd/display: Simplify brightness initialization") which dropped the cached backlight value in display code, but also removed code for when the default value read back was less than 1 nit. Restore this code so that the backlight brightness is restored to the correct default value in this circumstance. Reported-by: Mark Herbert Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3031 Cc: stable@vger.kernel.org Cc: Camille Cho Cc: Krunoslav Kovac Cc: Hamza Mahfooz Fixes: d9e865826c20 ("drm/amd/display: Simplify brightness initialization") Acked-by: Alex Deucher Signed-off-by: Mario Limonciello Signed-off-by: Alex Deucher --- .../gpu/drm/amd/display/dc/link/protocols/link_edp_panel_control.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/amd/display/dc/link/protocols/link_edp_panel_control.c b/drivers/gpu/drm/amd/display/dc/link/protocols/link_edp_panel_control.c index 996e4ee99023..e5cfaaef70b3 100644 --- a/drivers/gpu/drm/amd/display/dc/link/protocols/link_edp_panel_control.c +++ b/drivers/gpu/drm/amd/display/dc/link/protocols/link_edp_panel_control.c @@ -287,8 +287,8 @@ bool set_default_brightness_aux(struct dc_link *link) if (link && link->dpcd_sink_ext_caps.bits.oled == 1) { if (!read_default_bl_aux(link, &default_backlight)) default_backlight = 150000; - // if > 5000, it might be wrong readback - if (default_backlight > 5000000) + // if < 1 nits or > 5000, it might be wrong readback + if (default_backlight < 1000 || default_backlight > 5000000) default_backlight = 150000; return edp_set_backlight_level_nits(link, true, -- cgit v1.2.3 From 718ab8226636a1a3a7d281f5d6a7ad7c925efe5a Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Tue, 28 Nov 2023 09:15:07 +0100 Subject: PCI/ASPM: Add pci_enable_link_state_locked() Add pci_enable_link_state_locked() for enabling link states that can be used in contexts where a pci_bus_sem read lock is already held (e.g. from pci_walk_bus()). This helper will be used to fix a couple of potential deadlocks where the current helper is called with the lock already held, hence the CC stable tag. Fixes: f492edb40b54 ("PCI: vmd: Add quirk to configure PCIe ASPM and LTR") Link: https://lore.kernel.org/r/20231128081512.19387-2-johan+linaro@kernel.org Signed-off-by: Johan Hovold [bhelgaas: include helper name in subject, commit log] Signed-off-by: Bjorn Helgaas Reviewed-by: Manivannan Sadhasivam Cc: # 6.3 Cc: Michael Bottini Cc: David E. Box --- drivers/pci/pcie/aspm.c | 53 +++++++++++++++++++++++++++++++++++++------------ include/linux/pci.h | 3 +++ 2 files changed, 43 insertions(+), 13 deletions(-) diff --git a/drivers/pci/pcie/aspm.c b/drivers/pci/pcie/aspm.c index 50b04ae5c394..5eb462772354 100644 --- a/drivers/pci/pcie/aspm.c +++ b/drivers/pci/pcie/aspm.c @@ -1109,17 +1109,7 @@ int pci_disable_link_state(struct pci_dev *pdev, int state) } EXPORT_SYMBOL(pci_disable_link_state); -/** - * pci_enable_link_state - Clear and set the default device link state so that - * the link may be allowed to enter the specified states. Note that if the - * BIOS didn't grant ASPM control to the OS, this does nothing because we can't - * touch the LNKCTL register. Also note that this does not enable states - * disabled by pci_disable_link_state(). Return 0 or a negative errno. - * - * @pdev: PCI device - * @state: Mask of ASPM link states to enable - */ -int pci_enable_link_state(struct pci_dev *pdev, int state) +static int __pci_enable_link_state(struct pci_dev *pdev, int state, bool locked) { struct pcie_link_state *link = pcie_aspm_get_link(pdev); @@ -1136,7 +1126,8 @@ int pci_enable_link_state(struct pci_dev *pdev, int state) return -EPERM; } - down_read(&pci_bus_sem); + if (!locked) + down_read(&pci_bus_sem); mutex_lock(&aspm_lock); link->aspm_default = 0; if (state & PCIE_LINK_STATE_L0S) @@ -1157,12 +1148,48 @@ int pci_enable_link_state(struct pci_dev *pdev, int state) link->clkpm_default = (state & PCIE_LINK_STATE_CLKPM) ? 1 : 0; pcie_set_clkpm(link, policy_to_clkpm_state(link)); mutex_unlock(&aspm_lock); - up_read(&pci_bus_sem); + if (!locked) + up_read(&pci_bus_sem); return 0; } + +/** + * pci_enable_link_state - Clear and set the default device link state so that + * the link may be allowed to enter the specified states. Note that if the + * BIOS didn't grant ASPM control to the OS, this does nothing because we can't + * touch the LNKCTL register. Also note that this does not enable states + * disabled by pci_disable_link_state(). Return 0 or a negative errno. + * + * @pdev: PCI device + * @state: Mask of ASPM link states to enable + */ +int pci_enable_link_state(struct pci_dev *pdev, int state) +{ + return __pci_enable_link_state(pdev, state, false); +} EXPORT_SYMBOL(pci_enable_link_state); +/** + * pci_enable_link_state_locked - Clear and set the default device link state + * so that the link may be allowed to enter the specified states. Note that if + * the BIOS didn't grant ASPM control to the OS, this does nothing because we + * can't touch the LNKCTL register. Also note that this does not enable states + * disabled by pci_disable_link_state(). Return 0 or a negative errno. + * + * @pdev: PCI device + * @state: Mask of ASPM link states to enable + * + * Context: Caller holds pci_bus_sem read lock. + */ +int pci_enable_link_state_locked(struct pci_dev *pdev, int state) +{ + lockdep_assert_held_read(&pci_bus_sem); + + return __pci_enable_link_state(pdev, state, true); +} +EXPORT_SYMBOL(pci_enable_link_state_locked); + static int pcie_aspm_set_policy(const char *val, const struct kernel_param *kp) { diff --git a/include/linux/pci.h b/include/linux/pci.h index 60ca768bc867..dea043bc1e38 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -1829,6 +1829,7 @@ extern bool pcie_ports_native; int pci_disable_link_state(struct pci_dev *pdev, int state); int pci_disable_link_state_locked(struct pci_dev *pdev, int state); int pci_enable_link_state(struct pci_dev *pdev, int state); +int pci_enable_link_state_locked(struct pci_dev *pdev, int state); void pcie_no_aspm(void); bool pcie_aspm_support_enabled(void); bool pcie_aspm_enabled(struct pci_dev *pdev); @@ -1839,6 +1840,8 @@ static inline int pci_disable_link_state_locked(struct pci_dev *pdev, int state) { return 0; } static inline int pci_enable_link_state(struct pci_dev *pdev, int state) { return 0; } +static inline int pci_enable_link_state_locked(struct pci_dev *pdev, int state) +{ return 0; } static inline void pcie_no_aspm(void) { } static inline bool pcie_aspm_support_enabled(void) { return false; } static inline bool pcie_aspm_enabled(struct pci_dev *pdev) { return false; } -- cgit v1.2.3 From 49de0dc87965079a8e2803ee4b39f9d946259423 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Tue, 28 Nov 2023 09:15:08 +0100 Subject: PCI: vmd: Fix potential deadlock when enabling ASPM The vmd_pm_enable_quirk() helper is called from pci_walk_bus() during probe to enable ASPM for controllers with VMD_FEAT_BIOS_PM_QUIRK set. Since pci_walk_bus() already holds a pci_bus_sem read lock, use pci_enable_link_state_locked() to enable link states in order to avoid a potential deadlock (e.g. in case someone takes a write lock before reacquiring the read lock). Fixes: f492edb40b54 ("PCI: vmd: Add quirk to configure PCIe ASPM and LTR") Link: https://lore.kernel.org/r/20231128081512.19387-3-johan+linaro@kernel.org Signed-off-by: Johan Hovold [bhelgaas: add "potential" in subject since the deadlock has only been reported by lockdep, include helper name in commit log] Signed-off-by: Bjorn Helgaas Reviewed-by: Manivannan Sadhasivam Cc: # 6.3 Cc: Michael Bottini Cc: David E. Box --- drivers/pci/controller/vmd.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/pci/controller/vmd.c b/drivers/pci/controller/vmd.c index 94ba61fe1c44..0452cbc362ee 100644 --- a/drivers/pci/controller/vmd.c +++ b/drivers/pci/controller/vmd.c @@ -751,7 +751,7 @@ static int vmd_pm_enable_quirk(struct pci_dev *pdev, void *userdata) if (!(features & VMD_FEAT_BIOS_PM_QUIRK)) return 0; - pci_enable_link_state(pdev, PCIE_LINK_STATE_ALL); + pci_enable_link_state_locked(pdev, PCIE_LINK_STATE_ALL); pos = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_LTR); if (!pos) -- cgit v1.2.3 From f352ce99926048e12aa4281c32471031351aec98 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Tue, 28 Nov 2023 09:15:09 +0100 Subject: PCI: qcom: Fix potential deadlock when enabling ASPM The qcom_pcie_enable_aspm() helper is called from pci_walk_bus() during host init to enable ASPM. Since pci_walk_bus() already holds a pci_bus_sem read lock, use pci_enable_link_state_locked() to enable link states in order to avoid a potential deadlock (e.g. in case someone takes a write lock before reacquiring the read lock). This issue was reported by lockdep: ============================================ WARNING: possible recursive locking detected 6.7.0-rc1 #4 Not tainted -------------------------------------------- kworker/u16:6/147 is trying to acquire lock: ffffbf3ff9d2cfa0 (pci_bus_sem){++++}-{3:3}, at: pci_enable_link_state+0x74/0x1e8 but task is already holding lock: ffffbf3ff9d2cfa0 (pci_bus_sem){++++}-{3:3}, at: pci_walk_bus+0x34/0xbc other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(pci_bus_sem); lock(pci_bus_sem); *** DEADLOCK *** Fixes: 9f4f3dfad8cf ("PCI: qcom: Enable ASPM for platforms supporting 1.9.0 ops") Link: https://lore.kernel.org/r/20231128081512.19387-4-johan+linaro@kernel.org Signed-off-by: Johan Hovold [bhelgaas: add "potential" in subject since the deadlock has only been reported by lockdep, include helper name in commit log] Signed-off-by: Bjorn Helgaas Reviewed-by: Manivannan Sadhasivam --- drivers/pci/controller/dwc/pcie-qcom.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c index 6902e97719d1..13dbdfac98f2 100644 --- a/drivers/pci/controller/dwc/pcie-qcom.c +++ b/drivers/pci/controller/dwc/pcie-qcom.c @@ -970,7 +970,7 @@ static int qcom_pcie_enable_aspm(struct pci_dev *pdev, void *userdata) { /* Downstream devices need to be in D0 state before enabling PCI PM substates */ pci_set_power_state(pdev, PCI_D0); - pci_enable_link_state(pdev, PCIE_LINK_STATE_ALL); + pci_enable_link_state_locked(pdev, PCIE_LINK_STATE_ALL); return 0; } -- cgit v1.2.3 From 780f52e3213e5f05bb41adebe1f2214f2f86f4a3 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Tue, 28 Nov 2023 09:15:10 +0100 Subject: PCI: qcom: Clean up ASPM comment Break up the newly added ASPM comment so that it fits within the soft 80 character limit and becomes more readable. Link: https://lore.kernel.org/r/20231128081512.19387-5-johan+linaro@kernel.org Signed-off-by: Johan Hovold Signed-off-by: Bjorn Helgaas --- drivers/pci/controller/dwc/pcie-qcom.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c index 13dbdfac98f2..11c80555d975 100644 --- a/drivers/pci/controller/dwc/pcie-qcom.c +++ b/drivers/pci/controller/dwc/pcie-qcom.c @@ -968,7 +968,10 @@ static int qcom_pcie_post_init_2_7_0(struct qcom_pcie *pcie) static int qcom_pcie_enable_aspm(struct pci_dev *pdev, void *userdata) { - /* Downstream devices need to be in D0 state before enabling PCI PM substates */ + /* + * Downstream devices need to be in D0 state before enabling PCI PM + * substates. + */ pci_set_power_state(pdev, PCI_D0); pci_enable_link_state_locked(pdev, PCIE_LINK_STATE_ALL); -- cgit v1.2.3 From e673d383bdba94c9924388086b91988254d39f19 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Tue, 28 Nov 2023 09:15:11 +0100 Subject: PCI/ASPM: Clean up __pci_disable_link_state() 'sem' parameter Replace the current 'sem' parameter to the __pci_disable_link_state() helper with a more descriptive 'locked' parameter, which indicates whether a pci_bus_sem read lock is already held. Link: https://lore.kernel.org/r/20231128081512.19387-6-johan+linaro@kernel.org Signed-off-by: Johan Hovold [bhelgaas: include function name in subject, commit log] Signed-off-by: Bjorn Helgaas Reviewed-by: Manivannan Sadhasivam --- drivers/pci/pcie/aspm.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/pci/pcie/aspm.c b/drivers/pci/pcie/aspm.c index 5eb462772354..d7a3ca555cc1 100644 --- a/drivers/pci/pcie/aspm.c +++ b/drivers/pci/pcie/aspm.c @@ -1041,7 +1041,7 @@ static struct pcie_link_state *pcie_aspm_get_link(struct pci_dev *pdev) return bridge->link_state; } -static int __pci_disable_link_state(struct pci_dev *pdev, int state, bool sem) +static int __pci_disable_link_state(struct pci_dev *pdev, int state, bool locked) { struct pcie_link_state *link = pcie_aspm_get_link(pdev); @@ -1060,7 +1060,7 @@ static int __pci_disable_link_state(struct pci_dev *pdev, int state, bool sem) return -EPERM; } - if (sem) + if (!locked) down_read(&pci_bus_sem); mutex_lock(&aspm_lock); if (state & PCIE_LINK_STATE_L0S) @@ -1082,7 +1082,7 @@ static int __pci_disable_link_state(struct pci_dev *pdev, int state, bool sem) link->clkpm_disable = 1; pcie_set_clkpm(link, policy_to_clkpm_state(link)); mutex_unlock(&aspm_lock); - if (sem) + if (!locked) up_read(&pci_bus_sem); return 0; @@ -1090,7 +1090,7 @@ static int __pci_disable_link_state(struct pci_dev *pdev, int state, bool sem) int pci_disable_link_state_locked(struct pci_dev *pdev, int state) { - return __pci_disable_link_state(pdev, state, false); + return __pci_disable_link_state(pdev, state, true); } EXPORT_SYMBOL(pci_disable_link_state_locked); @@ -1105,7 +1105,7 @@ EXPORT_SYMBOL(pci_disable_link_state_locked); */ int pci_disable_link_state(struct pci_dev *pdev, int state) { - return __pci_disable_link_state(pdev, state, true); + return __pci_disable_link_state(pdev, state, false); } EXPORT_SYMBOL(pci_disable_link_state); -- cgit v1.2.3 From 7ff2b7a1821b61c324626ad57c3664398fb0083d Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Tue, 28 Nov 2023 09:15:12 +0100 Subject: PCI/ASPM: Add pci_disable_link_state_locked() lockdep assert Add a lockdep assert to pci_disable_link_state_locked() which should only be called with a pci_bus_sem read lock held. Link: https://lore.kernel.org/r/20231128081512.19387-7-johan+linaro@kernel.org Signed-off-by: Johan Hovold [bhelgaas: include function name in subject, commit log] Signed-off-by: Bjorn Helgaas Reviewed-by: Manivannan Sadhasivam --- drivers/pci/pcie/aspm.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/pci/pcie/aspm.c b/drivers/pci/pcie/aspm.c index d7a3ca555cc1..5dab531c8654 100644 --- a/drivers/pci/pcie/aspm.c +++ b/drivers/pci/pcie/aspm.c @@ -1090,6 +1090,8 @@ static int __pci_disable_link_state(struct pci_dev *pdev, int state, bool locked int pci_disable_link_state_locked(struct pci_dev *pdev, int state) { + lockdep_assert_held_read(&pci_bus_sem); + return __pci_disable_link_state(pdev, state, true); } EXPORT_SYMBOL(pci_disable_link_state_locked); -- cgit v1.2.3 From eec04ea119691e65227a97ce53c0da6b9b74b0b7 Mon Sep 17 00:00:00 2001 From: Paulo Alcantara Date: Mon, 11 Dec 2023 10:26:40 -0300 Subject: smb: client: fix OOB in receive_encrypted_standard() Fix potential OOB in receive_encrypted_standard() if server returned a large shdr->NextCommand that would end up writing off the end of @next_buffer. Fixes: b24df3e30cbf ("cifs: update receive_encrypted_standard to handle compounded responses") Cc: stable@vger.kernel.org Reported-by: Robert Morris Signed-off-by: Paulo Alcantara (SUSE) Signed-off-by: Steve French --- fs/smb/client/smb2ops.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) diff --git a/fs/smb/client/smb2ops.c b/fs/smb/client/smb2ops.c index fcfb6566b899..a6f4948adcbb 100644 --- a/fs/smb/client/smb2ops.c +++ b/fs/smb/client/smb2ops.c @@ -4943,6 +4943,7 @@ receive_encrypted_standard(struct TCP_Server_Info *server, struct smb2_hdr *shdr; unsigned int pdu_length = server->pdu_size; unsigned int buf_size; + unsigned int next_cmd; struct mid_q_entry *mid_entry; int next_is_large; char *next_buffer = NULL; @@ -4971,14 +4972,15 @@ receive_encrypted_standard(struct TCP_Server_Info *server, next_is_large = server->large_buf; one_more: shdr = (struct smb2_hdr *)buf; - if (shdr->NextCommand) { + next_cmd = le32_to_cpu(shdr->NextCommand); + if (next_cmd) { + if (WARN_ON_ONCE(next_cmd > pdu_length)) + return -1; if (next_is_large) next_buffer = (char *)cifs_buf_get(); else next_buffer = (char *)cifs_small_buf_get(); - memcpy(next_buffer, - buf + le32_to_cpu(shdr->NextCommand), - pdu_length - le32_to_cpu(shdr->NextCommand)); + memcpy(next_buffer, buf + next_cmd, pdu_length - next_cmd); } mid_entry = smb2_find_mid(server, buf); @@ -5002,8 +5004,8 @@ one_more: else ret = cifs_handle_standard(server, mid_entry); - if (ret == 0 && shdr->NextCommand) { - pdu_length -= le32_to_cpu(shdr->NextCommand); + if (ret == 0 && next_cmd) { + pdu_length -= next_cmd; server->large_buf = next_is_large; if (next_is_large) server->bigbuf = buf = next_buffer; -- cgit v1.2.3 From af1689a9b7701d9907dfc84d2a4b57c4bc907144 Mon Sep 17 00:00:00 2001 From: Paulo Alcantara Date: Mon, 11 Dec 2023 10:26:41 -0300 Subject: smb: client: fix potential OOBs in smb2_parse_contexts() Validate offsets and lengths before dereferencing create contexts in smb2_parse_contexts(). This fixes following oops when accessing invalid create contexts from server: BUG: unable to handle page fault for address: ffff8881178d8cc3 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 4a01067 P4D 4a01067 PUD 0 Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 3 PID: 1736 Comm: mount.cifs Not tainted 6.7.0-rc4 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.2-3-gd478f380-rebuilt.opensuse.org 04/01/2014 RIP: 0010:smb2_parse_contexts+0xa0/0x3a0 [cifs] Code: f8 10 75 13 48 b8 93 ad 25 50 9c b4 11 e7 49 39 06 0f 84 d2 00 00 00 8b 45 00 85 c0 74 61 41 29 c5 48 01 c5 41 83 fd 0f 76 55 <0f> b7 7d 04 0f b7 45 06 4c 8d 74 3d 00 66 83 f8 04 75 bc ba 04 00 RSP: 0018:ffffc900007939e0 EFLAGS: 00010216 RAX: ffffc90000793c78 RBX: ffff8880180cc000 RCX: ffffc90000793c90 RDX: ffffc90000793cc0 RSI: ffff8880178d8cc0 RDI: ffff8880180cc000 RBP: ffff8881178d8cbf R08: ffffc90000793c22 R09: 0000000000000000 R10: ffff8880180cc000 R11: 0000000000000024 R12: 0000000000000000 R13: 0000000000000020 R14: 0000000000000000 R15: ffffc90000793c22 FS: 00007f873753cbc0(0000) GS:ffff88806bc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffff8881178d8cc3 CR3: 00000000181ca000 CR4: 0000000000750ef0 PKRU: 55555554 Call Trace: ? __die+0x23/0x70 ? page_fault_oops+0x181/0x480 ? search_module_extables+0x19/0x60 ? srso_alias_return_thunk+0x5/0xfbef5 ? exc_page_fault+0x1b6/0x1c0 ? asm_exc_page_fault+0x26/0x30 ? smb2_parse_contexts+0xa0/0x3a0 [cifs] SMB2_open+0x38d/0x5f0 [cifs] ? smb2_is_path_accessible+0x138/0x260 [cifs] smb2_is_path_accessible+0x138/0x260 [cifs] cifs_is_path_remote+0x8d/0x230 [cifs] cifs_mount+0x7e/0x350 [cifs] cifs_smb3_do_mount+0x128/0x780 [cifs] smb3_get_tree+0xd9/0x290 [cifs] vfs_get_tree+0x2c/0x100 ? capable+0x37/0x70 path_mount+0x2d7/0xb80 ? srso_alias_return_thunk+0x5/0xfbef5 ? _raw_spin_unlock_irqrestore+0x44/0x60 __x64_sys_mount+0x11a/0x150 do_syscall_64+0x47/0xf0 entry_SYSCALL_64_after_hwframe+0x6f/0x77 RIP: 0033:0x7f8737657b1e Reported-by: Robert Morris Cc: stable@vger.kernel.org Signed-off-by: Paulo Alcantara (SUSE) Signed-off-by: Steve French --- fs/smb/client/cached_dir.c | 17 ++++++--- fs/smb/client/smb2pdu.c | 93 ++++++++++++++++++++++++++++------------------ fs/smb/client/smb2proto.h | 12 +++--- 3 files changed, 75 insertions(+), 47 deletions(-) diff --git a/fs/smb/client/cached_dir.c b/fs/smb/client/cached_dir.c index 59f6b8e32cc9..d64a306a414b 100644 --- a/fs/smb/client/cached_dir.c +++ b/fs/smb/client/cached_dir.c @@ -291,16 +291,23 @@ int open_cached_dir(unsigned int xid, struct cifs_tcon *tcon, oparms.fid->mid = le64_to_cpu(o_rsp->hdr.MessageId); #endif /* CIFS_DEBUG2 */ - rc = -EINVAL; + if (o_rsp->OplockLevel != SMB2_OPLOCK_LEVEL_LEASE) { + spin_unlock(&cfids->cfid_list_lock); + rc = -EINVAL; + goto oshr_free; + } + + rc = smb2_parse_contexts(server, rsp_iov, + &oparms.fid->epoch, + oparms.fid->lease_key, + &oplock, NULL, NULL); + if (rc) { spin_unlock(&cfids->cfid_list_lock); goto oshr_free; } - smb2_parse_contexts(server, o_rsp, - &oparms.fid->epoch, - oparms.fid->lease_key, &oplock, - NULL, NULL); + rc = -EINVAL; if (!(oplock & SMB2_LEASE_READ_CACHING_HE)) { spin_unlock(&cfids->cfid_list_lock); goto oshr_free; diff --git a/fs/smb/client/smb2pdu.c b/fs/smb/client/smb2pdu.c index 20634fc6d4f0..c571760ad39a 100644 --- a/fs/smb/client/smb2pdu.c +++ b/fs/smb/client/smb2pdu.c @@ -2236,17 +2236,18 @@ parse_posix_ctxt(struct create_context *cc, struct smb2_file_all_info *info, posix->nlink, posix->mode, posix->reparse_tag); } -void -smb2_parse_contexts(struct TCP_Server_Info *server, - struct smb2_create_rsp *rsp, - unsigned int *epoch, char *lease_key, __u8 *oplock, - struct smb2_file_all_info *buf, - struct create_posix_rsp *posix) +int smb2_parse_contexts(struct TCP_Server_Info *server, + struct kvec *rsp_iov, + unsigned int *epoch, + char *lease_key, __u8 *oplock, + struct smb2_file_all_info *buf, + struct create_posix_rsp *posix) { - char *data_offset; + struct smb2_create_rsp *rsp = rsp_iov->iov_base; struct create_context *cc; - unsigned int next; - unsigned int remaining; + size_t rem, off, len; + size_t doff, dlen; + size_t noff, nlen; char *name; static const char smb3_create_tag_posix[] = { 0x93, 0xAD, 0x25, 0x50, 0x9C, @@ -2255,45 +2256,63 @@ smb2_parse_contexts(struct TCP_Server_Info *server, }; *oplock = 0; - data_offset = (char *)rsp + le32_to_cpu(rsp->CreateContextsOffset); - remaining = le32_to_cpu(rsp->CreateContextsLength); - cc = (struct create_context *)data_offset; + + off = le32_to_cpu(rsp->CreateContextsOffset); + rem = le32_to_cpu(rsp->CreateContextsLength); + if (check_add_overflow(off, rem, &len) || len > rsp_iov->iov_len) + return -EINVAL; + cc = (struct create_context *)((u8 *)rsp + off); /* Initialize inode number to 0 in case no valid data in qfid context */ if (buf) buf->IndexNumber = 0; - while (remaining >= sizeof(struct create_context)) { - name = le16_to_cpu(cc->NameOffset) + (char *)cc; - if (le16_to_cpu(cc->NameLength) == 4 && - strncmp(name, SMB2_CREATE_REQUEST_LEASE, 4) == 0) - *oplock = server->ops->parse_lease_buf(cc, epoch, - lease_key); - else if (buf && (le16_to_cpu(cc->NameLength) == 4) && - strncmp(name, SMB2_CREATE_QUERY_ON_DISK_ID, 4) == 0) - parse_query_id_ctxt(cc, buf); - else if ((le16_to_cpu(cc->NameLength) == 16)) { - if (posix && - memcmp(name, smb3_create_tag_posix, 16) == 0) + while (rem >= sizeof(*cc)) { + doff = le16_to_cpu(cc->DataOffset); + dlen = le32_to_cpu(cc->DataLength); + if (check_add_overflow(doff, dlen, &len) || len > rem) + return -EINVAL; + + noff = le16_to_cpu(cc->NameOffset); + nlen = le16_to_cpu(cc->NameLength); + if (noff + nlen >= doff) + return -EINVAL; + + name = (char *)cc + noff; + switch (nlen) { + case 4: + if (!strncmp(name, SMB2_CREATE_REQUEST_LEASE, 4)) { + *oplock = server->ops->parse_lease_buf(cc, epoch, + lease_key); + } else if (buf && + !strncmp(name, SMB2_CREATE_QUERY_ON_DISK_ID, 4)) { + parse_query_id_ctxt(cc, buf); + } + break; + case 16: + if (posix && !memcmp(name, smb3_create_tag_posix, 16)) parse_posix_ctxt(cc, buf, posix); + break; + default: + cifs_dbg(FYI, "%s: unhandled context (nlen=%zu dlen=%zu)\n", + __func__, nlen, dlen); + if (IS_ENABLED(CONFIG_CIFS_DEBUG2)) + cifs_dump_mem("context data: ", cc, dlen); + break; } - /* else { - cifs_dbg(FYI, "Context not matched with len %d\n", - le16_to_cpu(cc->NameLength)); - cifs_dump_mem("Cctxt name: ", name, 4); - } */ - - next = le32_to_cpu(cc->Next); - if (!next) + + off = le32_to_cpu(cc->Next); + if (!off) break; - remaining -= next; - cc = (struct create_context *)((char *)cc + next); + if (check_sub_overflow(rem, off, &rem)) + return -EINVAL; + cc = (struct create_context *)((u8 *)cc + off); } if (rsp->OplockLevel != SMB2_OPLOCK_LEVEL_LEASE) *oplock = rsp->OplockLevel; - return; + return 0; } static int @@ -3124,8 +3143,8 @@ SMB2_open(const unsigned int xid, struct cifs_open_parms *oparms, __le16 *path, } - smb2_parse_contexts(server, rsp, &oparms->fid->epoch, - oparms->fid->lease_key, oplock, buf, posix); + rc = smb2_parse_contexts(server, &rsp_iov, &oparms->fid->epoch, + oparms->fid->lease_key, oplock, buf, posix); creat_exit: SMB2_open_free(&rqst); free_rsp_buf(resp_buftype, rsp); diff --git a/fs/smb/client/smb2proto.h b/fs/smb/client/smb2proto.h index 46eff9ec302a..0e371f7e2854 100644 --- a/fs/smb/client/smb2proto.h +++ b/fs/smb/client/smb2proto.h @@ -251,11 +251,13 @@ extern int smb3_validate_negotiate(const unsigned int, struct cifs_tcon *); extern enum securityEnum smb2_select_sectype(struct TCP_Server_Info *, enum securityEnum); -extern void smb2_parse_contexts(struct TCP_Server_Info *server, - struct smb2_create_rsp *rsp, - unsigned int *epoch, char *lease_key, - __u8 *oplock, struct smb2_file_all_info *buf, - struct create_posix_rsp *posix); +int smb2_parse_contexts(struct TCP_Server_Info *server, + struct kvec *rsp_iov, + unsigned int *epoch, + char *lease_key, __u8 *oplock, + struct smb2_file_all_info *buf, + struct create_posix_rsp *posix); + extern int smb3_encryption_required(const struct cifs_tcon *tcon); extern int smb2_validate_iov(unsigned int offset, unsigned int buffer_length, struct kvec *iov, unsigned int min_buf_size); -- cgit v1.2.3 From 90d025c2e953c11974e76637977c473200593a46 Mon Sep 17 00:00:00 2001 From: Paulo Alcantara Date: Mon, 11 Dec 2023 10:26:42 -0300 Subject: smb: client: fix NULL deref in asn1_ber_decoder() If server replied SMB2_NEGOTIATE with a zero SecurityBufferOffset, smb2_get_data_area() sets @len to non-zero but return NULL, so decode_negTokeninit() ends up being called with a NULL @security_blob: BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 2 PID: 871 Comm: mount.cifs Not tainted 6.7.0-rc4 #2 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.2-3-gd478f380-rebuilt.opensuse.org 04/01/2014 RIP: 0010:asn1_ber_decoder+0x173/0xc80 Code: 01 4c 39 2c 24 75 09 45 84 c9 0f 85 2f 03 00 00 48 8b 14 24 4c 29 ea 48 83 fa 01 0f 86 1e 07 00 00 48 8b 74 24 28 4d 8d 5d 01 <42> 0f b6 3c 2e 89 fa 40 88 7c 24 5c f7 d2 83 e2 1f 0f 84 3d 07 00 RSP: 0018:ffffc9000063f950 EFLAGS: 00010202 RAX: 0000000000000002 RBX: 0000000000000000 RCX: 000000000000004a RDX: 000000000000004a RSI: 0000000000000000 RDI: 0000000000000000 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000002 R11: 0000000000000001 R12: 0000000000000000 R13: 0000000000000000 R14: 000000000000004d R15: 0000000000000000 FS: 00007fce52b0fbc0(0000) GS:ffff88806ba00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 000000001ae64000 CR4: 0000000000750ef0 PKRU: 55555554 Call Trace: ? __die+0x23/0x70 ? page_fault_oops+0x181/0x480 ? __stack_depot_save+0x1e6/0x480 ? exc_page_fault+0x6f/0x1c0 ? asm_exc_page_fault+0x26/0x30 ? asn1_ber_decoder+0x173/0xc80 ? check_object+0x40/0x340 decode_negTokenInit+0x1e/0x30 [cifs] SMB2_negotiate+0xc99/0x17c0 [cifs] ? smb2_negotiate+0x46/0x60 [cifs] ? srso_alias_return_thunk+0x5/0xfbef5 smb2_negotiate+0x46/0x60 [cifs] cifs_negotiate_protocol+0xae/0x130 [cifs] cifs_get_smb_ses+0x517/0x1040 [cifs] ? srso_alias_return_thunk+0x5/0xfbef5 ? srso_alias_return_thunk+0x5/0xfbef5 ? queue_delayed_work_on+0x5d/0x90 cifs_mount_get_session+0x78/0x200 [cifs] dfs_mount_share+0x13a/0x9f0 [cifs] ? srso_alias_return_thunk+0x5/0xfbef5 ? lock_acquire+0xbf/0x2b0 ? find_nls+0x16/0x80 ? srso_alias_return_thunk+0x5/0xfbef5 cifs_mount+0x7e/0x350 [cifs] cifs_smb3_do_mount+0x128/0x780 [cifs] smb3_get_tree+0xd9/0x290 [cifs] vfs_get_tree+0x2c/0x100 ? capable+0x37/0x70 path_mount+0x2d7/0xb80 ? srso_alias_return_thunk+0x5/0xfbef5 ? _raw_spin_unlock_irqrestore+0x44/0x60 __x64_sys_mount+0x11a/0x150 do_syscall_64+0x47/0xf0 entry_SYSCALL_64_after_hwframe+0x6f/0x77 RIP: 0033:0x7fce52c2ab1e Fix this by setting @len to zero when @off == 0 so callers won't attempt to dereference non-existing data areas. Reported-by: Robert Morris Cc: stable@vger.kernel.org Signed-off-by: Paulo Alcantara (SUSE) Signed-off-by: Steve French --- fs/smb/client/smb2misc.c | 26 ++++++++++---------------- 1 file changed, 10 insertions(+), 16 deletions(-) diff --git a/fs/smb/client/smb2misc.c b/fs/smb/client/smb2misc.c index 32dfa0f7a78c..e20b4354e703 100644 --- a/fs/smb/client/smb2misc.c +++ b/fs/smb/client/smb2misc.c @@ -313,6 +313,9 @@ static const bool has_smb2_data_area[NUMBER_OF_SMB2_COMMANDS] = { char * smb2_get_data_area_len(int *off, int *len, struct smb2_hdr *shdr) { + const int max_off = 4096; + const int max_len = 128 * 1024; + *off = 0; *len = 0; @@ -384,29 +387,20 @@ smb2_get_data_area_len(int *off, int *len, struct smb2_hdr *shdr) * Invalid length or offset probably means data area is invalid, but * we have little choice but to ignore the data area in this case. */ - if (*off > 4096) { - cifs_dbg(VFS, "offset %d too large, data area ignored\n", *off); - *len = 0; - *off = 0; - } else if (*off < 0) { - cifs_dbg(VFS, "negative offset %d to data invalid ignore data area\n", - *off); + if (unlikely(*off < 0 || *off > max_off || + *len < 0 || *len > max_len)) { + cifs_dbg(VFS, "%s: invalid data area (off=%d len=%d)\n", + __func__, *off, *len); *off = 0; *len = 0; - } else if (*len < 0) { - cifs_dbg(VFS, "negative data length %d invalid, data area ignored\n", - *len); - *len = 0; - } else if (*len > 128 * 1024) { - cifs_dbg(VFS, "data area larger than 128K: %d\n", *len); + } else if (*off == 0) { *len = 0; } /* return pointer to beginning of data area, ie offset from SMB start */ - if ((*off != 0) && (*len != 0)) + if (*off > 0 && *len > 0) return (char *)shdr + *off; - else - return NULL; + return NULL; } /* -- cgit v1.2.3 From 3a42709fa909e22b0be4bb1e2795aa04ada732a3 Mon Sep 17 00:00:00 2001 From: Paulo Alcantara Date: Mon, 11 Dec 2023 10:26:43 -0300 Subject: smb: client: fix OOB in smb2_query_reparse_point() Validate @ioctl_rsp->OutputOffset and @ioctl_rsp->OutputCount so that their sum does not wrap to a number that is smaller than @reparse_buf and we end up with a wild pointer as follows: BUG: unable to handle page fault for address: ffff88809c5cd45f #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 4a01067 P4D 4a01067 PUD 0 Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 2 PID: 1260 Comm: mount.cifs Not tainted 6.7.0-rc4 #2 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.2-3-gd478f380-rebuilt.opensuse.org 04/01/2014 RIP: 0010:smb2_query_reparse_point+0x3e0/0x4c0 [cifs] Code: ff ff e8 f3 51 fe ff 41 89 c6 58 5a 45 85 f6 0f 85 14 fe ff ff 49 8b 57 48 8b 42 60 44 8b 42 64 42 8d 0c 00 49 39 4f 50 72 40 <8b> 04 02 48 8b 9d f0 fe ff ff 49 8b 57 50 89 03 48 8b 9d e8 fe ff RSP: 0018:ffffc90000347a90 EFLAGS: 00010212 RAX: 000000008000001f RBX: ffff88800ae11000 RCX: 00000000000000ec RDX: ffff88801c5cd440 RSI: 0000000000000000 RDI: ffffffff82004aa4 RBP: ffffc90000347bb0 R08: 00000000800000cd R09: 0000000000000001 R10: 0000000000000000 R11: 0000000000000024 R12: ffff8880114d4100 R13: ffff8880114d4198 R14: 0000000000000000 R15: ffff8880114d4000 FS: 00007f02c07babc0(0000) GS:ffff88806ba00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffff88809c5cd45f CR3: 0000000011750000 CR4: 0000000000750ef0 PKRU: 55555554 Call Trace: ? __die+0x23/0x70 ? page_fault_oops+0x181/0x480 ? search_module_extables+0x19/0x60 ? srso_alias_return_thunk+0x5/0xfbef5 ? exc_page_fault+0x1b6/0x1c0 ? asm_exc_page_fault+0x26/0x30 ? _raw_spin_unlock_irqrestore+0x44/0x60 ? smb2_query_reparse_point+0x3e0/0x4c0 [cifs] cifs_get_fattr+0x16e/0xa50 [cifs] ? srso_alias_return_thunk+0x5/0xfbef5 ? lock_acquire+0xbf/0x2b0 cifs_root_iget+0x163/0x5f0 [cifs] cifs_smb3_do_mount+0x5bd/0x780 [cifs] smb3_get_tree+0xd9/0x290 [cifs] vfs_get_tree+0x2c/0x100 ? capable+0x37/0x70 path_mount+0x2d7/0xb80 ? srso_alias_return_thunk+0x5/0xfbef5 ? _raw_spin_unlock_irqrestore+0x44/0x60 __x64_sys_mount+0x11a/0x150 do_syscall_64+0x47/0xf0 entry_SYSCALL_64_after_hwframe+0x6f/0x77 RIP: 0033:0x7f02c08d5b1e Fixes: 2e4564b31b64 ("smb3: add support for stat of WSL reparse points for special file types") Cc: stable@vger.kernel.org Reported-by: Robert Morris Signed-off-by: Paulo Alcantara (SUSE) Signed-off-by: Steve French --- fs/smb/client/smb2ops.c | 26 ++++++++++++++++---------- 1 file changed, 16 insertions(+), 10 deletions(-) diff --git a/fs/smb/client/smb2ops.c b/fs/smb/client/smb2ops.c index a6f4948adcbb..8f6f0a38b886 100644 --- a/fs/smb/client/smb2ops.c +++ b/fs/smb/client/smb2ops.c @@ -3003,7 +3003,7 @@ static int smb2_query_reparse_point(const unsigned int xid, struct kvec *rsp_iov; struct smb2_ioctl_rsp *ioctl_rsp; struct reparse_data_buffer *reparse_buf; - u32 plen; + u32 off, count, len; cifs_dbg(FYI, "%s: path: %s\n", __func__, full_path); @@ -3084,16 +3084,22 @@ static int smb2_query_reparse_point(const unsigned int xid, */ if (rc == 0) { /* See MS-FSCC 2.3.23 */ + off = le32_to_cpu(ioctl_rsp->OutputOffset); + count = le32_to_cpu(ioctl_rsp->OutputCount); + if (check_add_overflow(off, count, &len) || + len > rsp_iov[1].iov_len) { + cifs_tcon_dbg(VFS, "%s: invalid ioctl: off=%d count=%d\n", + __func__, off, count); + rc = -EIO; + goto query_rp_exit; + } - reparse_buf = (struct reparse_data_buffer *) - ((char *)ioctl_rsp + - le32_to_cpu(ioctl_rsp->OutputOffset)); - plen = le32_to_cpu(ioctl_rsp->OutputCount); - - if (plen + le32_to_cpu(ioctl_rsp->OutputOffset) > - rsp_iov[1].iov_len) { - cifs_tcon_dbg(FYI, "srv returned invalid ioctl len: %d\n", - plen); + reparse_buf = (void *)((u8 *)ioctl_rsp + off); + len = sizeof(*reparse_buf); + if (count < len || + count < le16_to_cpu(reparse_buf->ReparseDataLength) + len) { + cifs_tcon_dbg(VFS, "%s: invalid ioctl: off=%d count=%d\n", + __func__, off, count); rc = -EIO; goto query_rp_exit; } -- cgit v1.2.3 From 52bf9f6c09fca8c74388cd41cc24e5d1bff812a9 Mon Sep 17 00:00:00 2001 From: David Howells Date: Mon, 11 Dec 2023 21:43:52 +0000 Subject: afs: Fix refcount underflow from error handling race If an AFS cell that has an unreachable (eg. ENETUNREACH) server listed (VL server or fileserver), an asynchronous probe to one of its addresses may fail immediately because sendmsg() returns an error. When this happens, a refcount underflow can happen if certain events hit a very small window. The way this occurs is: (1) There are two levels of "call" object, the afs_call and the rxrpc_call. Each of them can be transitioned to a "completed" state in the event of success or failure. (2) Asynchronous afs_calls are self-referential whilst they are active to prevent them from evaporating when they're not being processed. This reference is disposed of when the afs_call is completed. Note that an afs_call may only be completed once; once completed completing it again will do nothing. (3) When a call transmission is made, the app-side rxrpc code queues a Tx buffer for the rxrpc I/O thread to transmit. The I/O thread invokes sendmsg() to transmit it - and in the case of failure, it transitions the rxrpc_call to the completed state. (4) When an rxrpc_call is completed, the app layer is notified. In this case, the app is kafs and it schedules a work item to process events pertaining to an afs_call. (5) When the afs_call event processor is run, it goes down through the RPC-specific handler to afs_extract_data() to retrieve data from rxrpc - and, in this case, it picks up the error from the rxrpc_call and returns it. The error is then propagated to the afs_call and that is completed too. At this point the self-reference is released. (6) If the rxrpc I/O thread manages to complete the rxrpc_call within the window between rxrpc_send_data() queuing the request packet and checking for call completion on the way out, then rxrpc_kernel_send_data() will return the error from sendmsg() to the app. (7) Then afs_make_call() will see an error and will jump to the error handling path which will attempt to clean up the afs_call. (8) The problem comes when the error handling path in afs_make_call() tries to unconditionally drop an async afs_call's self-reference. This self-reference, however, may already have been dropped by afs_extract_data() completing the afs_call (9) The refcount underflows when we return to afs_do_probe_vlserver() and that tries to drop its reference on the afs_call. Fix this by making afs_make_call() attempt to complete the afs_call rather than unconditionally putting it. That way, if afs_extract_data() manages to complete the call first, afs_make_call() won't do anything. The bug can be forced by making do_udp_sendmsg() return -ENETUNREACH and sticking an msleep() in rxrpc_send_data() after the 'success:' label to widen the race window. The error message looks something like: refcount_t: underflow; use-after-free. WARNING: CPU: 3 PID: 720 at lib/refcount.c:28 refcount_warn_saturate+0xba/0x110 ... RIP: 0010:refcount_warn_saturate+0xba/0x110 ... afs_put_call+0x1dc/0x1f0 [kafs] afs_fs_get_capabilities+0x8b/0xe0 [kafs] afs_fs_probe_fileserver+0x188/0x1e0 [kafs] afs_lookup_server+0x3bf/0x3f0 [kafs] afs_alloc_server_list+0x130/0x2e0 [kafs] afs_create_volume+0x162/0x400 [kafs] afs_get_tree+0x266/0x410 [kafs] vfs_get_tree+0x25/0xc0 fc_mount+0xe/0x40 afs_d_automount+0x1b3/0x390 [kafs] __traverse_mounts+0x8f/0x210 step_into+0x340/0x760 path_openat+0x13a/0x1260 do_filp_open+0xaf/0x160 do_sys_openat2+0xaf/0x170 or something like: refcount_t: underflow; use-after-free. ... RIP: 0010:refcount_warn_saturate+0x99/0xda ... afs_put_call+0x4a/0x175 afs_send_vl_probes+0x108/0x172 afs_select_vlserver+0xd6/0x311 afs_do_cell_detect_alias+0x5e/0x1e9 afs_cell_detect_alias+0x44/0x92 afs_validate_fc+0x9d/0x134 afs_get_tree+0x20/0x2e6 vfs_get_tree+0x1d/0xc9 fc_mount+0xe/0x33 afs_d_automount+0x48/0x9d __traverse_mounts+0xe0/0x166 step_into+0x140/0x274 open_last_lookups+0x1c1/0x1df path_openat+0x138/0x1c3 do_filp_open+0x55/0xb4 do_sys_openat2+0x6c/0xb6 Fixes: 34fa47612bfe ("afs: Fix race in async call refcounting") Reported-by: Bill MacAllister Closes: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1052304 Suggested-by: Jeffrey E Altman Signed-off-by: David Howells Reviewed-by: Jeffrey Altman cc: Marc Dionne cc: linux-afs@lists.infradead.org Link: https://lore.kernel.org/r/2633992.1702073229@warthog.procyon.org.uk/ # v1 Signed-off-by: Linus Torvalds --- fs/afs/rxrpc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/afs/rxrpc.c b/fs/afs/rxrpc.c index ed1644e7683f..d642d06a453b 100644 --- a/fs/afs/rxrpc.c +++ b/fs/afs/rxrpc.c @@ -424,7 +424,7 @@ error_kill_call: if (call->async) { if (cancel_work_sync(&call->async_work)) afs_put_call(call); - afs_put_call(call); + afs_set_call_complete(call, ret, 0); } ac->error = ret; -- cgit v1.2.3 From 1892fe103c3a20fced306c8dafa74f7f6d4ea0a3 Mon Sep 17 00:00:00 2001 From: Robin Murphy Date: Mon, 11 Dec 2023 19:27:28 +0000 Subject: perf/arm-cmn: Fail DTC counter allocation correctly Calling arm_cmn_event_clear() before all DTC indices are allocated is wrong, and can lead to arm_cmn_event_add() erroneously clearing live counters from full DTCs where allocation fails. Since the DTC counters are only updated by arm_cmn_init_counter() after all DTC and DTM allocations succeed, nothing actually needs cleaning up in this case anyway, and it should just return directly as it did before. Fixes: 7633ec2c262f ("perf/arm-cmn: Rework DTC counters (again)") Signed-off-by: Robin Murphy Reviewed-by: Ilkka Koskinen Acked-by: Will Deacon Link: https://lore.kernel.org/r/ed589c0d8e4130dc68b8ad1625226d28bdc185d4.1702322847.git.robin.murphy@arm.com Signed-off-by: Catalin Marinas --- drivers/perf/arm-cmn.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/perf/arm-cmn.c b/drivers/perf/arm-cmn.c index 014010d03588..847b0dc41293 100644 --- a/drivers/perf/arm-cmn.c +++ b/drivers/perf/arm-cmn.c @@ -1816,7 +1816,7 @@ static int arm_cmn_event_add(struct perf_event *event, int flags) idx = 0; while (cmn->dtc[j].counters[idx]) if (++idx == CMN_DT_NUM_COUNTERS) - goto free_dtms; + return -ENOSPC; } hw->dtc_idx[j] = idx; } -- cgit v1.2.3 From 24e90b9e34f9e039f56b5f25f6e6eb92cdd8f4b3 Mon Sep 17 00:00:00 2001 From: Hyunwoo Kim Date: Sat, 9 Dec 2023 04:42:10 -0500 Subject: atm: Fix Use-After-Free in do_vcc_ioctl Because do_vcc_ioctl() accesses sk->sk_receive_queue without holding a sk->sk_receive_queue.lock, it can cause a race with vcc_recvmsg(). A use-after-free for skb occurs with the following flow. ``` do_vcc_ioctl() -> skb_peek() vcc_recvmsg() -> skb_recv_datagram() -> skb_free_datagram() ``` Add sk->sk_receive_queue.lock to do_vcc_ioctl() to fix this issue. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Hyunwoo Kim Link: https://lore.kernel.org/r/20231209094210.GA403126@v4bel-B760M-AORUS-ELITE-AX Signed-off-by: Paolo Abeni --- net/atm/ioctl.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/net/atm/ioctl.c b/net/atm/ioctl.c index 838ebf0cabbf..f81f8d56f5c0 100644 --- a/net/atm/ioctl.c +++ b/net/atm/ioctl.c @@ -73,14 +73,17 @@ static int do_vcc_ioctl(struct socket *sock, unsigned int cmd, case SIOCINQ: { struct sk_buff *skb; + int amount; if (sock->state != SS_CONNECTED) { error = -EINVAL; goto done; } + spin_lock_irq(&sk->sk_receive_queue.lock); skb = skb_peek(&sk->sk_receive_queue); - error = put_user(skb ? skb->len : 0, - (int __user *)argp) ? -EFAULT : 0; + amount = skb ? skb->len : 0; + spin_unlock_irq(&sk->sk_receive_queue.lock); + error = put_user(amount, (int __user *)argp) ? -EFAULT : 0; goto done; } case ATM_SETSC: -- cgit v1.2.3 From 810c38a369a0a0ce625b5c12169abce1dd9ccd53 Mon Sep 17 00:00:00 2001 From: Hyunwoo Kim Date: Sat, 9 Dec 2023 05:05:38 -0500 Subject: net/rose: Fix Use-After-Free in rose_ioctl Because rose_ioctl() accesses sk->sk_receive_queue without holding a sk->sk_receive_queue.lock, it can cause a race with rose_accept(). A use-after-free for skb occurs with the following flow. ``` rose_ioctl() -> skb_peek() rose_accept() -> skb_dequeue() -> kfree_skb() ``` Add sk->sk_receive_queue.lock to rose_ioctl() to fix this issue. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Hyunwoo Kim Link: https://lore.kernel.org/r/20231209100538.GA407321@v4bel-B760M-AORUS-ELITE-AX Signed-off-by: Paolo Abeni --- net/rose/af_rose.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/net/rose/af_rose.c b/net/rose/af_rose.c index 0cc5a4e19900..ecb91ad4ce63 100644 --- a/net/rose/af_rose.c +++ b/net/rose/af_rose.c @@ -1315,9 +1315,11 @@ static int rose_ioctl(struct socket *sock, unsigned int cmd, unsigned long arg) case TIOCINQ: { struct sk_buff *skb; long amount = 0L; - /* These two are safe on a single CPU system as only user tasks fiddle here */ + + spin_lock_irq(&sk->sk_receive_queue.lock); if ((skb = skb_peek(&sk->sk_receive_queue)) != NULL) amount = skb->len; + spin_unlock_irq(&sk->sk_receive_queue.lock); return put_user(amount, (unsigned int __user *) argp); } -- cgit v1.2.3 From 43527a0094c10dfbf0d5a2e7979395a38de3ff65 Mon Sep 17 00:00:00 2001 From: Mikhail Khvainitski Date: Tue, 12 Dec 2023 15:31:48 +0200 Subject: HID: lenovo: Restrict detection of patched firmware only to USB cptkbd Commit 46a0a2c96f0f ("HID: lenovo: Detect quirk-free fw on cptkbd and stop applying workaround") introduced a regression for ThinkPad TrackPoint Keyboard II which has similar quirks to cptkbd (so it uses the same workarounds) but slightly different so that there are false-positives during detecting well-behaving firmware. This commit restricts detecting well-behaving firmware to the only model which known to have one and have stable enough quirks to not cause false-positives. Fixes: 46a0a2c96f0f ("HID: lenovo: Detect quirk-free fw on cptkbd and stop applying workaround") Link: https://lore.kernel.org/linux-input/ZXRiiPsBKNasioqH@jekhomev/ Link: https://bbs.archlinux.org/viewtopic.php?pid=2135468#p2135468 Signed-off-by: Mikhail Khvainitski Tested-by: Yauhen Kharuzhy Signed-off-by: Jiri Kosina --- drivers/hid/hid-lenovo.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/hid/hid-lenovo.c b/drivers/hid/hid-lenovo.c index 7c1b33be9d13..149a3c74346b 100644 --- a/drivers/hid/hid-lenovo.c +++ b/drivers/hid/hid-lenovo.c @@ -692,7 +692,8 @@ static int lenovo_event_cptkbd(struct hid_device *hdev, * so set middlebutton_state to 3 * to never apply workaround anymore */ - if (cptkbd_data->middlebutton_state == 1 && + if (hdev->product == USB_DEVICE_ID_LENOVO_CUSBKBD && + cptkbd_data->middlebutton_state == 1 && usage->type == EV_REL && (usage->code == REL_X || usage->code == REL_Y)) { cptkbd_data->middlebutton_state = 3; -- cgit v1.2.3 From df83a0df820b9b705e51b9499691b0dafb2f4dcb Mon Sep 17 00:00:00 2001 From: Yan Jun Date: Sun, 3 Dec 2023 19:50:58 +0800 Subject: HID: apple: Add "hfd.cn" and "WKB603" to the list of non-apple keyboards MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit JingZao(京造) WKB603 keyboard is a rebranded product of Jamesdonkey RS2 keyboard, identified as "hfd.cn WKB603" in wired mode, "WKB603" in bluetooth mode. Adding them to the list of non-apple keyboards fixes function key. Signed-off-by: Yan Jun Signed-off-by: Jiri Kosina --- drivers/hid/hid-apple.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/hid/hid-apple.c b/drivers/hid/hid-apple.c index d9e9829b2200..b9c7c0ed7bcc 100644 --- a/drivers/hid/hid-apple.c +++ b/drivers/hid/hid-apple.c @@ -347,6 +347,8 @@ static const struct apple_non_apple_keyboard non_apple_keyboards[] = { { "Hailuck" }, { "Jamesdonkey" }, { "A3R" }, + { "hfd.cn" }, + { "WKB603" }, }; static bool apple_is_non_apple_keyboard(struct hid_device *hdev) -- cgit v1.2.3 From 6c02757c936063f0631b4e43fe156f8c8f1f351f Mon Sep 17 00:00:00 2001 From: Ye Bin Date: Mon, 11 Dec 2023 19:25:44 +0800 Subject: jbd2: fix soft lockup in journal_finish_inode_data_buffers() There's issue when do io test: WARN: soft lockup - CPU#45 stuck for 11s! [jbd2/dm-2-8:4170] CPU: 45 PID: 4170 Comm: jbd2/dm-2-8 Kdump: loaded Tainted: G OE Call trace: dump_backtrace+0x0/0x1a0 show_stack+0x24/0x30 dump_stack+0xb0/0x100 watchdog_timer_fn+0x254/0x3f8 __hrtimer_run_queues+0x11c/0x380 hrtimer_interrupt+0xfc/0x2f8 arch_timer_handler_phys+0x38/0x58 handle_percpu_devid_irq+0x90/0x248 generic_handle_irq+0x3c/0x58 __handle_domain_irq+0x68/0xc0 gic_handle_irq+0x90/0x320 el1_irq+0xcc/0x180 queued_spin_lock_slowpath+0x1d8/0x320 jbd2_journal_commit_transaction+0x10f4/0x1c78 [jbd2] kjournald2+0xec/0x2f0 [jbd2] kthread+0x134/0x138 ret_from_fork+0x10/0x18 Analyzed informations from vmcore as follows: (1) There are about 5k+ jbd2_inode in 'commit_transaction->t_inode_list'; (2) Now is processing the 855th jbd2_inode; (3) JBD2 task has TIF_NEED_RESCHED flag; (4) There's no pags in address_space around the 855th jbd2_inode; (5) There are some process is doing drop caches; (6) Mounted with 'nodioread_nolock' option; (7) 128 CPUs; According to informations from vmcore we know 'journal->j_list_lock' spin lock competition is fierce. So journal_finish_inode_data_buffers() maybe process slowly. Theoretically, there is scheduling point in the filemap_fdatawait_range_keep_errors(). However, if inode's address_space has no pages which taged with PAGECACHE_TAG_WRITEBACK, will not call cond_resched(). So may lead to soft lockup. journal_finish_inode_data_buffers filemap_fdatawait_range_keep_errors __filemap_fdatawait_range while (index <= end) nr_pages = pagevec_lookup_range_tag(&pvec, mapping, &index, end, PAGECACHE_TAG_WRITEBACK); if (!nr_pages) break; --> If 'nr_pages' is equal zero will break, then will not call cond_resched() for (i = 0; i < nr_pages; i++) wait_on_page_writeback(page); cond_resched(); To solve above issue, add scheduling point in the journal_finish_inode_data_buffers(); Signed-off-by: Ye Bin Reviewed-by: Jan Kara Link: https://lore.kernel.org/r/20231211112544.3879780-1-yebin10@huawei.com Signed-off-by: Theodore Ts'o --- fs/jbd2/commit.c | 1 + 1 file changed, 1 insertion(+) diff --git a/fs/jbd2/commit.c b/fs/jbd2/commit.c index 9bdb377a348f..5e122586e06e 100644 --- a/fs/jbd2/commit.c +++ b/fs/jbd2/commit.c @@ -270,6 +270,7 @@ static int journal_finish_inode_data_buffers(journal_t *journal, if (!ret) ret = err; } + cond_resched(); spin_lock(&journal->j_list_lock); jinode->i_flags &= ~JI_COMMIT_RUNNING; smp_mb(); -- cgit v1.2.3 From 3c0696076aad60a2f04c019761921954579e1b0e Mon Sep 17 00:00:00 2001 From: James Houghton Date: Mon, 4 Dec 2023 17:26:46 +0000 Subject: arm64: mm: Always make sw-dirty PTEs hw-dirty in pte_modify It is currently possible for a userspace application to enter an infinite page fault loop when using HugeTLB pages implemented with contiguous PTEs when HAFDBS is not available. This happens because: 1. The kernel may sometimes write PTEs that are sw-dirty but hw-clean (PTE_DIRTY | PTE_RDONLY | PTE_WRITE). 2. If, during a write, the CPU uses a sw-dirty, hw-clean PTE in handling the memory access on a system without HAFDBS, we will get a page fault. 3. HugeTLB will check if it needs to update the dirty bits on the PTE. For contiguous PTEs, it will check to see if the pgprot bits need updating. In this case, HugeTLB wants to write a sequence of sw-dirty, hw-dirty PTEs, but it finds that all the PTEs it is about to overwrite are all pte_dirty() (pte_sw_dirty() => pte_dirty()), so it thinks no update is necessary. We can get the kernel to write a sw-dirty, hw-clean PTE with the following steps (showing the relevant VMA flags and pgprot bits): i. Create a valid, writable contiguous PTE. VMA vmflags: VM_SHARED | VM_READ | VM_WRITE VMA pgprot bits: PTE_RDONLY | PTE_WRITE PTE pgprot bits: PTE_DIRTY | PTE_WRITE ii. mprotect the VMA to PROT_NONE. VMA vmflags: VM_SHARED VMA pgprot bits: PTE_RDONLY PTE pgprot bits: PTE_DIRTY | PTE_RDONLY iii. mprotect the VMA back to PROT_READ | PROT_WRITE. VMA vmflags: VM_SHARED | VM_READ | VM_WRITE VMA pgprot bits: PTE_RDONLY | PTE_WRITE PTE pgprot bits: PTE_DIRTY | PTE_WRITE | PTE_RDONLY Make it impossible to create a writeable sw-dirty, hw-clean PTE with pte_modify(). Such a PTE should be impossible to create, and there may be places that assume that pte_dirty() implies pte_hw_dirty(). Signed-off-by: James Houghton Fixes: 031e6e6b4e12 ("arm64: hugetlb: Avoid unnecessary clearing in huge_ptep_set_access_flags") Cc: Acked-by: Will Deacon Reviewed-by: Ryan Roberts Link: https://lore.kernel.org/r/20231204172646.2541916-3-jthoughton@google.com Signed-off-by: Catalin Marinas --- arch/arm64/include/asm/pgtable.h | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/arch/arm64/include/asm/pgtable.h b/arch/arm64/include/asm/pgtable.h index b19a8aee684c..79ce70fbb751 100644 --- a/arch/arm64/include/asm/pgtable.h +++ b/arch/arm64/include/asm/pgtable.h @@ -834,6 +834,12 @@ static inline pte_t pte_modify(pte_t pte, pgprot_t newprot) pte = set_pte_bit(pte, __pgprot(PTE_DIRTY)); pte_val(pte) = (pte_val(pte) & ~mask) | (pgprot_val(newprot) & mask); + /* + * If we end up clearing hw dirtiness for a sw-dirty PTE, set hardware + * dirtiness again. + */ + if (pte_sw_dirty(pte)) + pte = pte_mkdirty(pte); return pte; } -- cgit v1.2.3 From 19544aa5f5ece80b12315fa68e51fb2ba6f01fa4 Mon Sep 17 00:00:00 2001 From: Saleemkhan Jamadar Date: Tue, 28 Nov 2023 17:02:06 +0530 Subject: drm/amdgpu/jpeg: configure doorbell for each playback Doorbell is configured during start of each playback. v1 - add comment for the doorbell programming change Signed-off-by: Saleemkhan Jamadar Acked-by: Leo Liu Reviewed-by: Veerabadhran Gopalakrishnan Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/jpeg_v4_0_5.c | 15 ++++++++------- 1 file changed, 8 insertions(+), 7 deletions(-) diff --git a/drivers/gpu/drm/amd/amdgpu/jpeg_v4_0_5.c b/drivers/gpu/drm/amd/amdgpu/jpeg_v4_0_5.c index 9df011323d4b..6ede85b28cc8 100644 --- a/drivers/gpu/drm/amd/amdgpu/jpeg_v4_0_5.c +++ b/drivers/gpu/drm/amd/amdgpu/jpeg_v4_0_5.c @@ -155,13 +155,6 @@ static int jpeg_v4_0_5_hw_init(void *handle) struct amdgpu_ring *ring = adev->jpeg.inst->ring_dec; int r; - adev->nbio.funcs->vcn_doorbell_range(adev, ring->use_doorbell, - (adev->doorbell_index.vcn.vcn_ring0_1 << 1), 0); - - WREG32_SOC15(VCN, 0, regVCN_JPEG_DB_CTRL, - ring->doorbell_index << VCN_JPEG_DB_CTRL__OFFSET__SHIFT | - VCN_JPEG_DB_CTRL__EN_MASK); - r = amdgpu_ring_test_helper(ring); if (r) return r; @@ -336,6 +329,14 @@ static int jpeg_v4_0_5_start(struct amdgpu_device *adev) if (adev->pm.dpm_enabled) amdgpu_dpm_enable_jpeg(adev, true); + /* doorbell programming is done for every playback */ + adev->nbio.funcs->vcn_doorbell_range(adev, ring->use_doorbell, + (adev->doorbell_index.vcn.vcn_ring0_1 << 1), 0); + + WREG32_SOC15(VCN, 0, regVCN_JPEG_DB_CTRL, + ring->doorbell_index << VCN_JPEG_DB_CTRL__OFFSET__SHIFT | + VCN_JPEG_DB_CTRL__EN_MASK); + /* disable power gating */ r = jpeg_v4_0_5_disable_static_power_gating(adev); if (r) -- cgit v1.2.3 From a409c053b0b0cc0fc1af684d0b23bd5ca010c4cb Mon Sep 17 00:00:00 2001 From: Taimur Hassan Date: Wed, 6 Dec 2023 14:52:25 -0500 Subject: drm/amd/display: Revert "Fix conversions between bytes and KB" [Why & How] HostVMMinPageSize is expected to be in KB according to spec, the checks later down the line reflect this as well. Reviewed-by: Nicholas Kazlauskas Acked-by: Aurabindo Pillai Signed-off-by: Taimur Hassan Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/dc/dml2/display_mode_core.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/drivers/gpu/drm/amd/display/dc/dml2/display_mode_core.c b/drivers/gpu/drm/amd/display/dc/dml2/display_mode_core.c index 4d1336e5afc2..180f8a98a361 100644 --- a/drivers/gpu/drm/amd/display/dc/dml2/display_mode_core.c +++ b/drivers/gpu/drm/amd/display/dc/dml2/display_mode_core.c @@ -6329,7 +6329,7 @@ static void dml_prefetch_check(struct display_mode_lib_st *mode_lib) mode_lib->ms.NoOfDPPThisState, mode_lib->ms.dpte_group_bytes, s->HostVMInefficiencyFactor, - mode_lib->ms.soc.hostvm_min_page_size_kbytes * 1024, + mode_lib->ms.soc.hostvm_min_page_size_kbytes, mode_lib->ms.cache_display_cfg.plane.HostVMMaxPageTableLevels); s->NextMaxVStartup = s->MaxVStartupAllPlanes[j]; @@ -6542,7 +6542,7 @@ static void dml_prefetch_check(struct display_mode_lib_st *mode_lib) mode_lib->ms.cache_display_cfg.plane.HostVMEnable, mode_lib->ms.cache_display_cfg.plane.HostVMMaxPageTableLevels, mode_lib->ms.cache_display_cfg.plane.GPUVMEnable, - mode_lib->ms.soc.hostvm_min_page_size_kbytes * 1024, + mode_lib->ms.soc.hostvm_min_page_size_kbytes, mode_lib->ms.PDEAndMetaPTEBytesPerFrame[j][k], mode_lib->ms.MetaRowBytes[j][k], mode_lib->ms.DPTEBytesPerRow[j][k], @@ -7687,7 +7687,7 @@ dml_bool_t dml_core_mode_support(struct display_mode_lib_st *mode_lib) CalculateVMRowAndSwath_params->HostVMMaxNonCachedPageTableLevels = mode_lib->ms.cache_display_cfg.plane.HostVMMaxPageTableLevels; CalculateVMRowAndSwath_params->GPUVMMaxPageTableLevels = mode_lib->ms.cache_display_cfg.plane.GPUVMMaxPageTableLevels; CalculateVMRowAndSwath_params->GPUVMMinPageSizeKBytes = mode_lib->ms.cache_display_cfg.plane.GPUVMMinPageSizeKBytes; - CalculateVMRowAndSwath_params->HostVMMinPageSize = mode_lib->ms.soc.hostvm_min_page_size_kbytes * 1024; + CalculateVMRowAndSwath_params->HostVMMinPageSize = mode_lib->ms.soc.hostvm_min_page_size_kbytes; CalculateVMRowAndSwath_params->PTEBufferModeOverrideEn = mode_lib->ms.cache_display_cfg.plane.PTEBufferModeOverrideEn; CalculateVMRowAndSwath_params->PTEBufferModeOverrideVal = mode_lib->ms.cache_display_cfg.plane.PTEBufferMode; CalculateVMRowAndSwath_params->PTEBufferSizeNotExceeded = mode_lib->ms.PTEBufferSizeNotExceededPerState; @@ -7957,7 +7957,7 @@ dml_bool_t dml_core_mode_support(struct display_mode_lib_st *mode_lib) UseMinimumDCFCLK_params->GPUVMMaxPageTableLevels = mode_lib->ms.cache_display_cfg.plane.GPUVMMaxPageTableLevels; UseMinimumDCFCLK_params->HostVMEnable = mode_lib->ms.cache_display_cfg.plane.HostVMEnable; UseMinimumDCFCLK_params->NumberOfActiveSurfaces = mode_lib->ms.num_active_planes; - UseMinimumDCFCLK_params->HostVMMinPageSize = mode_lib->ms.soc.hostvm_min_page_size_kbytes * 1024; + UseMinimumDCFCLK_params->HostVMMinPageSize = mode_lib->ms.soc.hostvm_min_page_size_kbytes; UseMinimumDCFCLK_params->HostVMMaxNonCachedPageTableLevels = mode_lib->ms.cache_display_cfg.plane.HostVMMaxPageTableLevels; UseMinimumDCFCLK_params->DynamicMetadataVMEnabled = mode_lib->ms.ip.dynamic_metadata_vm_enabled; UseMinimumDCFCLK_params->ImmediateFlipRequirement = s->ImmediateFlipRequiredFinal; @@ -8699,7 +8699,7 @@ void dml_core_mode_programming(struct display_mode_lib_st *mode_lib, const struc CalculateVMRowAndSwath_params->HostVMMaxNonCachedPageTableLevels = mode_lib->ms.cache_display_cfg.plane.HostVMMaxPageTableLevels; CalculateVMRowAndSwath_params->GPUVMMaxPageTableLevels = mode_lib->ms.cache_display_cfg.plane.GPUVMMaxPageTableLevels; CalculateVMRowAndSwath_params->GPUVMMinPageSizeKBytes = mode_lib->ms.cache_display_cfg.plane.GPUVMMinPageSizeKBytes; - CalculateVMRowAndSwath_params->HostVMMinPageSize = mode_lib->ms.soc.hostvm_min_page_size_kbytes * 1024; + CalculateVMRowAndSwath_params->HostVMMinPageSize = mode_lib->ms.soc.hostvm_min_page_size_kbytes; CalculateVMRowAndSwath_params->PTEBufferModeOverrideEn = mode_lib->ms.cache_display_cfg.plane.PTEBufferModeOverrideEn; CalculateVMRowAndSwath_params->PTEBufferModeOverrideVal = mode_lib->ms.cache_display_cfg.plane.PTEBufferMode; CalculateVMRowAndSwath_params->PTEBufferSizeNotExceeded = s->dummy_boolean_array[0]; @@ -8805,7 +8805,7 @@ void dml_core_mode_programming(struct display_mode_lib_st *mode_lib, const struc mode_lib->ms.cache_display_cfg.hw.DPPPerSurface, locals->dpte_group_bytes, s->HostVMInefficiencyFactor, - mode_lib->ms.soc.hostvm_min_page_size_kbytes * 1024, + mode_lib->ms.soc.hostvm_min_page_size_kbytes, mode_lib->ms.cache_display_cfg.plane.HostVMMaxPageTableLevels); locals->TCalc = 24.0 / locals->DCFCLKDeepSleep; @@ -8995,7 +8995,7 @@ void dml_core_mode_programming(struct display_mode_lib_st *mode_lib, const struc CalculatePrefetchSchedule_params->GPUVMEnable = mode_lib->ms.cache_display_cfg.plane.GPUVMEnable; CalculatePrefetchSchedule_params->HostVMEnable = mode_lib->ms.cache_display_cfg.plane.HostVMEnable; CalculatePrefetchSchedule_params->HostVMMaxNonCachedPageTableLevels = mode_lib->ms.cache_display_cfg.plane.HostVMMaxPageTableLevels; - CalculatePrefetchSchedule_params->HostVMMinPageSize = mode_lib->ms.soc.hostvm_min_page_size_kbytes * 1024; + CalculatePrefetchSchedule_params->HostVMMinPageSize = mode_lib->ms.soc.hostvm_min_page_size_kbytes; CalculatePrefetchSchedule_params->DynamicMetadataEnable = mode_lib->ms.cache_display_cfg.plane.DynamicMetadataEnable[k]; CalculatePrefetchSchedule_params->DynamicMetadataVMEnabled = mode_lib->ms.ip.dynamic_metadata_vm_enabled; CalculatePrefetchSchedule_params->DynamicMetadataLinesBeforeActiveRequired = mode_lib->ms.cache_display_cfg.plane.DynamicMetadataLinesBeforeActiveRequired[k]; @@ -9240,7 +9240,7 @@ void dml_core_mode_programming(struct display_mode_lib_st *mode_lib, const struc mode_lib->ms.cache_display_cfg.plane.HostVMEnable, mode_lib->ms.cache_display_cfg.plane.HostVMMaxPageTableLevels, mode_lib->ms.cache_display_cfg.plane.GPUVMEnable, - mode_lib->ms.soc.hostvm_min_page_size_kbytes * 1024, + mode_lib->ms.soc.hostvm_min_page_size_kbytes, locals->PDEAndMetaPTEBytesFrame[k], locals->MetaRowByte[k], locals->PixelPTEBytesPerRow[k], -- cgit v1.2.3 From fb01ab528df324a140058a11e9b25e5efdf9671d Mon Sep 17 00:00:00 2001 From: Fangzhi Zuo Date: Wed, 6 Dec 2023 14:52:28 -0500 Subject: drm/amd/display: Populate dtbclk from bounding box dtbclk is unavaliable from pmfw. Try to grab the value from bounding box Reviewed-by: Charlene Liu Acked-by: Aurabindo Pillai Signed-off-by: Fangzhi Zuo Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/dc/dml/dcn35/dcn35_fpu.c | 14 +++++++++----- .../gpu/drm/amd/display/dc/dml2/dml2_translation_helper.c | 5 +++-- 2 files changed, 12 insertions(+), 7 deletions(-) diff --git a/drivers/gpu/drm/amd/display/dc/dml/dcn35/dcn35_fpu.c b/drivers/gpu/drm/amd/display/dc/dml/dcn35/dcn35_fpu.c index 39cf1ae3a3e1..f154a3eb1d1a 100644 --- a/drivers/gpu/drm/amd/display/dc/dml/dcn35/dcn35_fpu.c +++ b/drivers/gpu/drm/amd/display/dc/dml/dcn35/dcn35_fpu.c @@ -124,7 +124,7 @@ struct _vcs_dpi_soc_bounding_box_st dcn3_5_soc = { .phyclk_mhz = 600.0, .phyclk_d18_mhz = 667.0, .dscclk_mhz = 186.0, - .dtbclk_mhz = 625.0, + .dtbclk_mhz = 600.0, }, { .state = 1, @@ -133,7 +133,7 @@ struct _vcs_dpi_soc_bounding_box_st dcn3_5_soc = { .phyclk_mhz = 810.0, .phyclk_d18_mhz = 667.0, .dscclk_mhz = 209.0, - .dtbclk_mhz = 625.0, + .dtbclk_mhz = 600.0, }, { .state = 2, @@ -142,7 +142,7 @@ struct _vcs_dpi_soc_bounding_box_st dcn3_5_soc = { .phyclk_mhz = 810.0, .phyclk_d18_mhz = 667.0, .dscclk_mhz = 209.0, - .dtbclk_mhz = 625.0, + .dtbclk_mhz = 600.0, }, { .state = 3, @@ -151,7 +151,7 @@ struct _vcs_dpi_soc_bounding_box_st dcn3_5_soc = { .phyclk_mhz = 810.0, .phyclk_d18_mhz = 667.0, .dscclk_mhz = 371.0, - .dtbclk_mhz = 625.0, + .dtbclk_mhz = 600.0, }, { .state = 4, @@ -160,7 +160,7 @@ struct _vcs_dpi_soc_bounding_box_st dcn3_5_soc = { .phyclk_mhz = 810.0, .phyclk_d18_mhz = 667.0, .dscclk_mhz = 417.0, - .dtbclk_mhz = 625.0, + .dtbclk_mhz = 600.0, }, }, .num_states = 5, @@ -348,6 +348,8 @@ void dcn35_update_bw_bounding_box_fpu(struct dc *dc, clock_limits[i].socclk_mhz; dc->dml2_options.bbox_overrides.clks_table.clk_entries[i].memclk_mhz = clk_table->entries[i].memclk_mhz * clk_table->entries[i].wck_ratio; + dc->dml2_options.bbox_overrides.clks_table.clk_entries[i].dtbclk_mhz = + clock_limits[i].dtbclk_mhz; dc->dml2_options.bbox_overrides.clks_table.num_entries_per_clk.num_dcfclk_levels = clk_table->num_entries; dc->dml2_options.bbox_overrides.clks_table.num_entries_per_clk.num_fclk_levels = @@ -360,6 +362,8 @@ void dcn35_update_bw_bounding_box_fpu(struct dc *dc, clk_table->num_entries; dc->dml2_options.bbox_overrides.clks_table.num_entries_per_clk.num_memclk_levels = clk_table->num_entries; + dc->dml2_options.bbox_overrides.clks_table.num_entries_per_clk.num_dtbclk_levels = + clk_table->num_entries; } } diff --git a/drivers/gpu/drm/amd/display/dc/dml2/dml2_translation_helper.c b/drivers/gpu/drm/amd/display/dc/dml2/dml2_translation_helper.c index fa8fe5bf7e57..db06a5b749b4 100644 --- a/drivers/gpu/drm/amd/display/dc/dml2/dml2_translation_helper.c +++ b/drivers/gpu/drm/amd/display/dc/dml2/dml2_translation_helper.c @@ -423,8 +423,9 @@ void dml2_init_soc_states(struct dml2_context *dml2, const struct dc *in_dc, } for (i = 0; i < dml2->config.bbox_overrides.clks_table.num_entries_per_clk.num_dtbclk_levels; i++) { - p->in_states->state_array[i].dtbclk_mhz = - dml2->config.bbox_overrides.clks_table.clk_entries[i].dtbclk_mhz; + if (dml2->config.bbox_overrides.clks_table.clk_entries[i].dtbclk_mhz > 0) + p->in_states->state_array[i].dtbclk_mhz = + dml2->config.bbox_overrides.clks_table.clk_entries[i].dtbclk_mhz; } for (i = 0; i < dml2->config.bbox_overrides.clks_table.num_entries_per_clk.num_dispclk_levels; i++) { -- cgit v1.2.3 From e7ab758741672acb21c5d841a9f0309d30e48a06 Mon Sep 17 00:00:00 2001 From: Mario Limonciello Date: Mon, 19 Jun 2023 15:04:24 -0500 Subject: drm/amd/display: Disable PSR-SU on Parade 0803 TCON again When screen brightness is rapidly changed and PSR-SU is enabled the display hangs on panels with this TCON even on the latest DCN 3.1.4 microcode (0x8002a81 at this time). This was disabled previously as commit 072030b17830 ("drm/amd: Disable PSR-SU on Parade 0803 TCON") but reverted as commit 1e66a17ce546 ("Revert "drm/amd: Disable PSR-SU on Parade 0803 TCON"") in favor of testing for a new enough microcode (commit cd2e31a9ab93 ("drm/amd/display: Set minimum requirement for using PSR-SU on Phoenix")). As hangs are still happening specifically with this TCON, disable PSR-SU again for it until it can be root caused. Cc: stable@vger.kernel.org Cc: aaron.ma@canonical.com Cc: binli@gnome.org Cc: Marc Rossi Cc: Hamza Mahfooz Signed-off-by: Mario Limonciello Link: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/2046131 Acked-by: Alex Deucher Reviewed-by: Harry Wentland Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/modules/power/power_helpers.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/gpu/drm/amd/display/modules/power/power_helpers.c b/drivers/gpu/drm/amd/display/modules/power/power_helpers.c index a522a7c02911..1675314a3ff2 100644 --- a/drivers/gpu/drm/amd/display/modules/power/power_helpers.c +++ b/drivers/gpu/drm/amd/display/modules/power/power_helpers.c @@ -839,6 +839,8 @@ bool is_psr_su_specific_panel(struct dc_link *link) ((dpcd_caps->sink_dev_id_str[1] == 0x08 && dpcd_caps->sink_dev_id_str[0] == 0x08) || (dpcd_caps->sink_dev_id_str[1] == 0x08 && dpcd_caps->sink_dev_id_str[0] == 0x07))) isPSRSUSupported = false; + else if (dpcd_caps->sink_dev_id_str[1] == 0x08 && dpcd_caps->sink_dev_id_str[0] == 0x03) + isPSRSUSupported = false; else if (dpcd_caps->psr_info.force_psrsu_cap == 0x1) isPSRSUSupported = true; } -- cgit v1.2.3 From 3a0b5a2929fdeda63fc921c2dbed237059acf732 Mon Sep 17 00:00:00 2001 From: Piotr Gardocki Date: Tue, 21 Nov 2023 22:47:15 -0500 Subject: iavf: Introduce new state machines for flow director New states introduced: IAVF_FDIR_FLTR_DIS_REQUEST IAVF_FDIR_FLTR_DIS_PENDING IAVF_FDIR_FLTR_INACTIVE Current FDIR state machines (SM) are not adequate to handle a few scenarios in the link DOWN/UP event, reset event and ntuple-feature. For example, when VF link goes DOWN and comes back UP administratively, the expectation is that previously installed filters should also be restored. But with current SM, filters are not restored. So with new SM, during link DOWN filters are marked as INACTIVE in the iavf list but removed from PF. After link UP, SM will transition from INACTIVE to ADD_REQUEST to restore the filter. Similarly, with VF reset, filters will be removed from the PF, but marked as INACTIVE in the iavf list. Filters will be restored after reset completion. Steps to reproduce: ------------------- 1. Create a VF. Here VF is enp8s0. 2. Assign IP addresses to VF and link partner and ping continuously from remote. Here remote IP is 1.1.1.1. 3. Check default RX Queue of traffic. ethtool -S enp8s0 | grep -E "rx-[[:digit:]]+\.packets" 4. Add filter - change default RX Queue (to 15 here) ethtool -U ens8s0 flow-type ip4 src-ip 1.1.1.1 action 15 loc 5 5. Ensure filter gets added and traffic is received on RX queue 15 now. Link event testing: ------------------- 6. Bring VF link down and up. If traffic flows to configured queue 15, test is success, otherwise it is a failure. Reset event testing: -------------------- 7. Reset the VF. If traffic flows to configured queue 15, test is success, otherwise it is a failure. Fixes: 0dbfbabb840d ("iavf: Add framework to enable ethtool ntuple filters") Signed-off-by: Piotr Gardocki Reviewed-by: Larysa Zaremba Signed-off-by: Ranganatha Rao Tested-by: Rafal Romanowski Signed-off-by: Tony Nguyen --- drivers/net/ethernet/intel/iavf/iavf.h | 1 + drivers/net/ethernet/intel/iavf/iavf_ethtool.c | 27 ++++++---- drivers/net/ethernet/intel/iavf/iavf_fdir.h | 15 +++++- drivers/net/ethernet/intel/iavf/iavf_main.c | 48 +++++++++++++---- drivers/net/ethernet/intel/iavf/iavf_virtchnl.c | 71 +++++++++++++++++++++++-- 5 files changed, 139 insertions(+), 23 deletions(-) diff --git a/drivers/net/ethernet/intel/iavf/iavf.h b/drivers/net/ethernet/intel/iavf/iavf.h index e7ab89dc883a..63b45c61cc4a 100644 --- a/drivers/net/ethernet/intel/iavf/iavf.h +++ b/drivers/net/ethernet/intel/iavf/iavf.h @@ -292,6 +292,7 @@ struct iavf_adapter { #define IAVF_FLAG_QUEUES_DISABLED BIT(17) #define IAVF_FLAG_SETUP_NETDEV_FEATURES BIT(18) #define IAVF_FLAG_REINIT_MSIX_NEEDED BIT(20) +#define IAVF_FLAG_FDIR_ENABLED BIT(21) /* duplicates for common code */ #define IAVF_FLAG_DCB_ENABLED 0 /* flags for admin queue service task */ diff --git a/drivers/net/ethernet/intel/iavf/iavf_ethtool.c b/drivers/net/ethernet/intel/iavf/iavf_ethtool.c index 19cbfe554689..dc499fe7734e 100644 --- a/drivers/net/ethernet/intel/iavf/iavf_ethtool.c +++ b/drivers/net/ethernet/intel/iavf/iavf_ethtool.c @@ -1061,7 +1061,7 @@ iavf_get_ethtool_fdir_entry(struct iavf_adapter *adapter, struct iavf_fdir_fltr *rule = NULL; int ret = 0; - if (!FDIR_FLTR_SUPPORT(adapter)) + if (!(adapter->flags & IAVF_FLAG_FDIR_ENABLED)) return -EOPNOTSUPP; spin_lock_bh(&adapter->fdir_fltr_lock); @@ -1203,7 +1203,7 @@ iavf_get_fdir_fltr_ids(struct iavf_adapter *adapter, struct ethtool_rxnfc *cmd, unsigned int cnt = 0; int val = 0; - if (!FDIR_FLTR_SUPPORT(adapter)) + if (!(adapter->flags & IAVF_FLAG_FDIR_ENABLED)) return -EOPNOTSUPP; cmd->data = IAVF_MAX_FDIR_FILTERS; @@ -1395,7 +1395,7 @@ static int iavf_add_fdir_ethtool(struct iavf_adapter *adapter, struct ethtool_rx int count = 50; int err; - if (!FDIR_FLTR_SUPPORT(adapter)) + if (!(adapter->flags & IAVF_FLAG_FDIR_ENABLED)) return -EOPNOTSUPP; if (fsp->flow_type & FLOW_MAC_EXT) @@ -1436,12 +1436,16 @@ static int iavf_add_fdir_ethtool(struct iavf_adapter *adapter, struct ethtool_rx spin_lock_bh(&adapter->fdir_fltr_lock); iavf_fdir_list_add_fltr(adapter, fltr); adapter->fdir_active_fltr++; - fltr->state = IAVF_FDIR_FLTR_ADD_REQUEST; - adapter->aq_required |= IAVF_FLAG_AQ_ADD_FDIR_FILTER; + if (adapter->link_up) { + fltr->state = IAVF_FDIR_FLTR_ADD_REQUEST; + adapter->aq_required |= IAVF_FLAG_AQ_ADD_FDIR_FILTER; + } else { + fltr->state = IAVF_FDIR_FLTR_INACTIVE; + } spin_unlock_bh(&adapter->fdir_fltr_lock); - mod_delayed_work(adapter->wq, &adapter->watchdog_task, 0); - + if (adapter->link_up) + mod_delayed_work(adapter->wq, &adapter->watchdog_task, 0); ret: if (err && fltr) kfree(fltr); @@ -1463,7 +1467,7 @@ static int iavf_del_fdir_ethtool(struct iavf_adapter *adapter, struct ethtool_rx struct iavf_fdir_fltr *fltr = NULL; int err = 0; - if (!FDIR_FLTR_SUPPORT(adapter)) + if (!(adapter->flags & IAVF_FLAG_FDIR_ENABLED)) return -EOPNOTSUPP; spin_lock_bh(&adapter->fdir_fltr_lock); @@ -1472,6 +1476,11 @@ static int iavf_del_fdir_ethtool(struct iavf_adapter *adapter, struct ethtool_rx if (fltr->state == IAVF_FDIR_FLTR_ACTIVE) { fltr->state = IAVF_FDIR_FLTR_DEL_REQUEST; adapter->aq_required |= IAVF_FLAG_AQ_DEL_FDIR_FILTER; + } else if (fltr->state == IAVF_FDIR_FLTR_INACTIVE) { + list_del(&fltr->list); + kfree(fltr); + adapter->fdir_active_fltr--; + fltr = NULL; } else { err = -EBUSY; } @@ -1780,7 +1789,7 @@ static int iavf_get_rxnfc(struct net_device *netdev, struct ethtool_rxnfc *cmd, ret = 0; break; case ETHTOOL_GRXCLSRLCNT: - if (!FDIR_FLTR_SUPPORT(adapter)) + if (!(adapter->flags & IAVF_FLAG_FDIR_ENABLED)) break; spin_lock_bh(&adapter->fdir_fltr_lock); cmd->rule_cnt = adapter->fdir_active_fltr; diff --git a/drivers/net/ethernet/intel/iavf/iavf_fdir.h b/drivers/net/ethernet/intel/iavf/iavf_fdir.h index 9eb9f73f6adf..d31bd923ba8c 100644 --- a/drivers/net/ethernet/intel/iavf/iavf_fdir.h +++ b/drivers/net/ethernet/intel/iavf/iavf_fdir.h @@ -6,12 +6,25 @@ struct iavf_adapter; -/* State of Flow Director filter */ +/* State of Flow Director filter + * + * *_REQUEST states are used to mark filter to be sent to PF driver to perform + * an action (either add or delete filter). *_PENDING states are an indication + * that request was sent to PF and the driver is waiting for response. + * + * Both DELETE and DISABLE states are being used to delete a filter in PF. + * The difference is that after a successful response filter in DEL_PENDING + * state is being deleted from VF driver as well and filter in DIS_PENDING state + * is being changed to INACTIVE state. + */ enum iavf_fdir_fltr_state_t { IAVF_FDIR_FLTR_ADD_REQUEST, /* User requests to add filter */ IAVF_FDIR_FLTR_ADD_PENDING, /* Filter pending add by the PF */ IAVF_FDIR_FLTR_DEL_REQUEST, /* User requests to delete filter */ IAVF_FDIR_FLTR_DEL_PENDING, /* Filter pending delete by the PF */ + IAVF_FDIR_FLTR_DIS_REQUEST, /* Filter scheduled to be disabled */ + IAVF_FDIR_FLTR_DIS_PENDING, /* Filter pending disable by the PF */ + IAVF_FDIR_FLTR_INACTIVE, /* Filter inactive on link down */ IAVF_FDIR_FLTR_ACTIVE, /* Filter is active */ }; diff --git a/drivers/net/ethernet/intel/iavf/iavf_main.c b/drivers/net/ethernet/intel/iavf/iavf_main.c index c862ebcd2e39..567435e23936 100644 --- a/drivers/net/ethernet/intel/iavf/iavf_main.c +++ b/drivers/net/ethernet/intel/iavf/iavf_main.c @@ -1353,18 +1353,20 @@ static void iavf_clear_cloud_filters(struct iavf_adapter *adapter) **/ static void iavf_clear_fdir_filters(struct iavf_adapter *adapter) { - struct iavf_fdir_fltr *fdir, *fdirtmp; + struct iavf_fdir_fltr *fdir; /* remove all Flow Director filters */ spin_lock_bh(&adapter->fdir_fltr_lock); - list_for_each_entry_safe(fdir, fdirtmp, &adapter->fdir_list_head, - list) { + list_for_each_entry(fdir, &adapter->fdir_list_head, list) { if (fdir->state == IAVF_FDIR_FLTR_ADD_REQUEST) { - list_del(&fdir->list); - kfree(fdir); - adapter->fdir_active_fltr--; - } else { - fdir->state = IAVF_FDIR_FLTR_DEL_REQUEST; + /* Cancel a request, keep filter as inactive */ + fdir->state = IAVF_FDIR_FLTR_INACTIVE; + } else if (fdir->state == IAVF_FDIR_FLTR_ADD_PENDING || + fdir->state == IAVF_FDIR_FLTR_ACTIVE) { + /* Disable filters which are active or have a pending + * request to PF to be added + */ + fdir->state = IAVF_FDIR_FLTR_DIS_REQUEST; } } spin_unlock_bh(&adapter->fdir_fltr_lock); @@ -4112,6 +4114,33 @@ static int iavf_setup_tc(struct net_device *netdev, enum tc_setup_type type, } } +/** + * iavf_restore_fdir_filters + * @adapter: board private structure + * + * Restore existing FDIR filters when VF netdev comes back up. + **/ +static void iavf_restore_fdir_filters(struct iavf_adapter *adapter) +{ + struct iavf_fdir_fltr *f; + + spin_lock_bh(&adapter->fdir_fltr_lock); + list_for_each_entry(f, &adapter->fdir_list_head, list) { + if (f->state == IAVF_FDIR_FLTR_DIS_REQUEST) { + /* Cancel a request, keep filter as active */ + f->state = IAVF_FDIR_FLTR_ACTIVE; + } else if (f->state == IAVF_FDIR_FLTR_DIS_PENDING || + f->state == IAVF_FDIR_FLTR_INACTIVE) { + /* Add filters which are inactive or have a pending + * request to PF to be deleted + */ + f->state = IAVF_FDIR_FLTR_ADD_REQUEST; + adapter->aq_required |= IAVF_FLAG_AQ_ADD_FDIR_FILTER; + } + } + spin_unlock_bh(&adapter->fdir_fltr_lock); +} + /** * iavf_open - Called when a network interface is made active * @netdev: network interface device structure @@ -4179,8 +4208,9 @@ static int iavf_open(struct net_device *netdev) spin_unlock_bh(&adapter->mac_vlan_list_lock); - /* Restore VLAN filters that were removed with IFF_DOWN */ + /* Restore filters that were removed with IFF_DOWN */ iavf_restore_filters(adapter); + iavf_restore_fdir_filters(adapter); iavf_configure(adapter); diff --git a/drivers/net/ethernet/intel/iavf/iavf_virtchnl.c b/drivers/net/ethernet/intel/iavf/iavf_virtchnl.c index 64c4443dbef9..2d9366be0ec5 100644 --- a/drivers/net/ethernet/intel/iavf/iavf_virtchnl.c +++ b/drivers/net/ethernet/intel/iavf/iavf_virtchnl.c @@ -1735,8 +1735,8 @@ void iavf_add_fdir_filter(struct iavf_adapter *adapter) **/ void iavf_del_fdir_filter(struct iavf_adapter *adapter) { + struct virtchnl_fdir_del f = {}; struct iavf_fdir_fltr *fdir; - struct virtchnl_fdir_del f; bool process_fltr = false; int len; @@ -1753,11 +1753,16 @@ void iavf_del_fdir_filter(struct iavf_adapter *adapter) list_for_each_entry(fdir, &adapter->fdir_list_head, list) { if (fdir->state == IAVF_FDIR_FLTR_DEL_REQUEST) { process_fltr = true; - memset(&f, 0, len); f.vsi_id = fdir->vc_add_msg.vsi_id; f.flow_id = fdir->flow_id; fdir->state = IAVF_FDIR_FLTR_DEL_PENDING; break; + } else if (fdir->state == IAVF_FDIR_FLTR_DIS_REQUEST) { + process_fltr = true; + f.vsi_id = fdir->vc_add_msg.vsi_id; + f.flow_id = fdir->flow_id; + fdir->state = IAVF_FDIR_FLTR_DIS_PENDING; + break; } } spin_unlock_bh(&adapter->fdir_fltr_lock); @@ -1901,6 +1906,48 @@ static void iavf_netdev_features_vlan_strip_set(struct net_device *netdev, netdev->features &= ~NETIF_F_HW_VLAN_CTAG_RX; } +/** + * iavf_activate_fdir_filters - Reactivate all FDIR filters after a reset + * @adapter: private adapter structure + * + * Called after a reset to re-add all FDIR filters and delete some of them + * if they were pending to be deleted. + */ +static void iavf_activate_fdir_filters(struct iavf_adapter *adapter) +{ + struct iavf_fdir_fltr *f, *ftmp; + bool add_filters = false; + + spin_lock_bh(&adapter->fdir_fltr_lock); + list_for_each_entry_safe(f, ftmp, &adapter->fdir_list_head, list) { + if (f->state == IAVF_FDIR_FLTR_ADD_REQUEST || + f->state == IAVF_FDIR_FLTR_ADD_PENDING || + f->state == IAVF_FDIR_FLTR_ACTIVE) { + /* All filters and requests have been removed in PF, + * restore them + */ + f->state = IAVF_FDIR_FLTR_ADD_REQUEST; + add_filters = true; + } else if (f->state == IAVF_FDIR_FLTR_DIS_REQUEST || + f->state == IAVF_FDIR_FLTR_DIS_PENDING) { + /* Link down state, leave filters as inactive */ + f->state = IAVF_FDIR_FLTR_INACTIVE; + } else if (f->state == IAVF_FDIR_FLTR_DEL_REQUEST || + f->state == IAVF_FDIR_FLTR_DEL_PENDING) { + /* Delete filters that were pending to be deleted, the + * list on PF is already cleared after a reset + */ + list_del(&f->list); + kfree(f); + adapter->fdir_active_fltr--; + } + } + spin_unlock_bh(&adapter->fdir_fltr_lock); + + if (add_filters) + adapter->aq_required |= IAVF_FLAG_AQ_ADD_FDIR_FILTER; +} + /** * iavf_virtchnl_completion * @adapter: adapter structure @@ -2078,7 +2125,8 @@ void iavf_virtchnl_completion(struct iavf_adapter *adapter, spin_lock_bh(&adapter->fdir_fltr_lock); list_for_each_entry(fdir, &adapter->fdir_list_head, list) { - if (fdir->state == IAVF_FDIR_FLTR_DEL_PENDING) { + if (fdir->state == IAVF_FDIR_FLTR_DEL_PENDING || + fdir->state == IAVF_FDIR_FLTR_DIS_PENDING) { fdir->state = IAVF_FDIR_FLTR_ACTIVE; dev_info(&adapter->pdev->dev, "Failed to del Flow Director filter, error %s\n", iavf_stat_str(&adapter->hw, @@ -2214,6 +2262,8 @@ void iavf_virtchnl_completion(struct iavf_adapter *adapter, spin_unlock_bh(&adapter->mac_vlan_list_lock); + iavf_activate_fdir_filters(adapter); + iavf_parse_vf_resource_msg(adapter); /* negotiated VIRTCHNL_VF_OFFLOAD_VLAN_V2, so wait for the @@ -2390,7 +2440,9 @@ void iavf_virtchnl_completion(struct iavf_adapter *adapter, list_for_each_entry_safe(fdir, fdir_tmp, &adapter->fdir_list_head, list) { if (fdir->state == IAVF_FDIR_FLTR_DEL_PENDING) { - if (del_fltr->status == VIRTCHNL_FDIR_SUCCESS) { + if (del_fltr->status == VIRTCHNL_FDIR_SUCCESS || + del_fltr->status == + VIRTCHNL_FDIR_FAILURE_RULE_NONEXIST) { dev_info(&adapter->pdev->dev, "Flow Director filter with location %u is deleted\n", fdir->loc); list_del(&fdir->list); @@ -2402,6 +2454,17 @@ void iavf_virtchnl_completion(struct iavf_adapter *adapter, del_fltr->status); iavf_print_fdir_fltr(adapter, fdir); } + } else if (fdir->state == IAVF_FDIR_FLTR_DIS_PENDING) { + if (del_fltr->status == VIRTCHNL_FDIR_SUCCESS || + del_fltr->status == + VIRTCHNL_FDIR_FAILURE_RULE_NONEXIST) { + fdir->state = IAVF_FDIR_FLTR_INACTIVE; + } else { + fdir->state = IAVF_FDIR_FLTR_ACTIVE; + dev_info(&adapter->pdev->dev, "Failed to disable Flow Director filter with status: %d\n", + del_fltr->status); + iavf_print_fdir_fltr(adapter, fdir); + } } } spin_unlock_bh(&adapter->fdir_fltr_lock); -- cgit v1.2.3 From 09d23b8918f9ab0f8114f6b94f2faf8bde3fb52a Mon Sep 17 00:00:00 2001 From: Piotr Gardocki Date: Tue, 21 Nov 2023 22:47:16 -0500 Subject: iavf: Handle ntuple on/off based on new state machines for flow director ntuple-filter feature on/off: Default is on. If turned off, the filters will be removed from both PF and iavf list. The removal is irrespective of current filter state. Steps to reproduce: ------------------- 1. Ensure ntuple is on. ethtool -K enp8s0 ntuple-filters on 2. Create a filter to receive the traffic into non-default rx-queue like 15 and ensure traffic is flowing into queue into 15. Now, turn off ntuple. Traffic should not flow to configured queue 15. It should flow to default RX queue. Fixes: 0dbfbabb840d ("iavf: Add framework to enable ethtool ntuple filters") Signed-off-by: Piotr Gardocki Reviewed-by: Larysa Zaremba Signed-off-by: Ranganatha Rao Tested-by: Rafal Romanowski Signed-off-by: Tony Nguyen --- drivers/net/ethernet/intel/iavf/iavf_main.c | 59 +++++++++++++++++++++++++++++ 1 file changed, 59 insertions(+) diff --git a/drivers/net/ethernet/intel/iavf/iavf_main.c b/drivers/net/ethernet/intel/iavf/iavf_main.c index 567435e23936..98116872f6bd 100644 --- a/drivers/net/ethernet/intel/iavf/iavf_main.c +++ b/drivers/net/ethernet/intel/iavf/iavf_main.c @@ -4341,6 +4341,49 @@ static int iavf_change_mtu(struct net_device *netdev, int new_mtu) return ret; } +/** + * iavf_disable_fdir - disable Flow Director and clear existing filters + * @adapter: board private structure + **/ +static void iavf_disable_fdir(struct iavf_adapter *adapter) +{ + struct iavf_fdir_fltr *fdir, *fdirtmp; + bool del_filters = false; + + adapter->flags &= ~IAVF_FLAG_FDIR_ENABLED; + + /* remove all Flow Director filters */ + spin_lock_bh(&adapter->fdir_fltr_lock); + list_for_each_entry_safe(fdir, fdirtmp, &adapter->fdir_list_head, + list) { + if (fdir->state == IAVF_FDIR_FLTR_ADD_REQUEST || + fdir->state == IAVF_FDIR_FLTR_INACTIVE) { + /* Delete filters not registered in PF */ + list_del(&fdir->list); + kfree(fdir); + adapter->fdir_active_fltr--; + } else if (fdir->state == IAVF_FDIR_FLTR_ADD_PENDING || + fdir->state == IAVF_FDIR_FLTR_DIS_REQUEST || + fdir->state == IAVF_FDIR_FLTR_ACTIVE) { + /* Filters registered in PF, schedule their deletion */ + fdir->state = IAVF_FDIR_FLTR_DEL_REQUEST; + del_filters = true; + } else if (fdir->state == IAVF_FDIR_FLTR_DIS_PENDING) { + /* Request to delete filter already sent to PF, change + * state to DEL_PENDING to delete filter after PF's + * response, not set as INACTIVE + */ + fdir->state = IAVF_FDIR_FLTR_DEL_PENDING; + } + } + spin_unlock_bh(&adapter->fdir_fltr_lock); + + if (del_filters) { + adapter->aq_required |= IAVF_FLAG_AQ_DEL_FDIR_FILTER; + mod_delayed_work(adapter->wq, &adapter->watchdog_task, 0); + } +} + #define NETIF_VLAN_OFFLOAD_FEATURES (NETIF_F_HW_VLAN_CTAG_RX | \ NETIF_F_HW_VLAN_CTAG_TX | \ NETIF_F_HW_VLAN_STAG_RX | \ @@ -4366,6 +4409,13 @@ static int iavf_set_features(struct net_device *netdev, ((netdev->features & NETIF_F_RXFCS) ^ (features & NETIF_F_RXFCS))) iavf_schedule_reset(adapter, IAVF_FLAG_RESET_NEEDED); + if ((netdev->features & NETIF_F_NTUPLE) ^ (features & NETIF_F_NTUPLE)) { + if (features & NETIF_F_NTUPLE) + adapter->flags |= IAVF_FLAG_FDIR_ENABLED; + else + iavf_disable_fdir(adapter); + } + return 0; } @@ -4715,6 +4765,9 @@ static netdev_features_t iavf_fix_features(struct net_device *netdev, features = iavf_fix_netdev_vlan_features(adapter, features); + if (!FDIR_FLTR_SUPPORT(adapter)) + features &= ~NETIF_F_NTUPLE; + return iavf_fix_strip_features(adapter, features); } @@ -4832,6 +4885,12 @@ int iavf_process_config(struct iavf_adapter *adapter) if (vfres->vf_cap_flags & VIRTCHNL_VF_OFFLOAD_VLAN) netdev->features |= NETIF_F_HW_VLAN_CTAG_FILTER; + if (FDIR_FLTR_SUPPORT(adapter)) { + netdev->hw_features |= NETIF_F_NTUPLE; + netdev->features |= NETIF_F_NTUPLE; + adapter->flags |= IAVF_FLAG_FDIR_ENABLED; + } + netdev->priv_flags |= IFF_UNICAST_FLT; /* Do not turn on offloads when they are requested to be turned off. -- cgit v1.2.3 From 7ae42ef308ed0f6250b36f43e4eeb182ebbe6215 Mon Sep 17 00:00:00 2001 From: Slawomir Laba Date: Wed, 29 Nov 2023 10:35:26 -0500 Subject: iavf: Fix iavf_shutdown to call iavf_remove instead iavf_close Make the flow for pci shutdown be the same to the pci remove. iavf_shutdown was implementing an incomplete version of iavf_remove. It misses several calls to the kernel like iavf_free_misc_irq, iavf_reset_interrupt_capability, iounmap that might break the system on reboot or hibernation. Implement the call of iavf_remove directly in iavf_shutdown to close this gap. Fixes below error messages (dmesg) during shutdown stress tests - [685814.900917] ice 0000:88:00.0: MAC 02:d0:5f:82:43:5d does not exist for VF 0 [685814.900928] ice 0000:88:00.0: MAC 33:33:00:00:00:01 does not exist for VF 0 Reproduction: 1. Create one VF interface: echo 1 > /sys/class/net//device/sriov_numvfs 2. Run live dmesg on the host: dmesg -wH 3. On SUT, script below steps into vf_namespace_assignment.sh <#!/bin/sh> // Remove <>. Git removes # line if= (edit this per VF name) loop=0 while true; do echo test round $loop let loop++ ip netns add ns$loop ip link set dev $if up ip link set dev $if netns ns$loop ip netns exec ns$loop ip link set dev $if up ip netns exec ns$loop ip link set dev $if netns 1 ip netns delete ns$loop done 4. Run the script for at least 1000 iterations on SUT: ./vf_namespace_assignment.sh Expected result: No errors in dmesg. Fixes: 129cf89e5856 ("iavf: rename functions and structs to new name") Signed-off-by: Slawomir Laba Reviewed-by: Michal Swiatkowski Reviewed-by: Ahmed Zaki Reviewed-by: Jesse Brandeburg Co-developed-by: Ranganatha Rao Signed-off-by: Ranganatha Rao Tested-by: Rafal Romanowski Signed-off-by: Tony Nguyen --- drivers/net/ethernet/intel/iavf/iavf_main.c | 72 +++++++++-------------------- 1 file changed, 21 insertions(+), 51 deletions(-) diff --git a/drivers/net/ethernet/intel/iavf/iavf_main.c b/drivers/net/ethernet/intel/iavf/iavf_main.c index 98116872f6bd..e8d5b889addc 100644 --- a/drivers/net/ethernet/intel/iavf/iavf_main.c +++ b/drivers/net/ethernet/intel/iavf/iavf_main.c @@ -276,27 +276,6 @@ void iavf_free_virt_mem(struct iavf_hw *hw, struct iavf_virt_mem *mem) kfree(mem->va); } -/** - * iavf_lock_timeout - try to lock mutex but give up after timeout - * @lock: mutex that should be locked - * @msecs: timeout in msecs - * - * Returns 0 on success, negative on failure - **/ -static int iavf_lock_timeout(struct mutex *lock, unsigned int msecs) -{ - unsigned int wait, delay = 10; - - for (wait = 0; wait < msecs; wait += delay) { - if (mutex_trylock(lock)) - return 0; - - msleep(delay); - } - - return -1; -} - /** * iavf_schedule_reset - Set the flags and schedule a reset event * @adapter: board private structure @@ -4914,34 +4893,6 @@ int iavf_process_config(struct iavf_adapter *adapter) return 0; } -/** - * iavf_shutdown - Shutdown the device in preparation for a reboot - * @pdev: pci device structure - **/ -static void iavf_shutdown(struct pci_dev *pdev) -{ - struct iavf_adapter *adapter = iavf_pdev_to_adapter(pdev); - struct net_device *netdev = adapter->netdev; - - netif_device_detach(netdev); - - if (netif_running(netdev)) - iavf_close(netdev); - - if (iavf_lock_timeout(&adapter->crit_lock, 5000)) - dev_warn(&adapter->pdev->dev, "%s: failed to acquire crit_lock\n", __func__); - /* Prevent the watchdog from running. */ - iavf_change_state(adapter, __IAVF_REMOVE); - adapter->aq_required = 0; - mutex_unlock(&adapter->crit_lock); - -#ifdef CONFIG_PM - pci_save_state(pdev); - -#endif - pci_disable_device(pdev); -} - /** * iavf_probe - Device Initialization Routine * @pdev: PCI device information struct @@ -5152,16 +5103,21 @@ static int __maybe_unused iavf_resume(struct device *dev_d) **/ static void iavf_remove(struct pci_dev *pdev) { - struct iavf_adapter *adapter = iavf_pdev_to_adapter(pdev); struct iavf_fdir_fltr *fdir, *fdirtmp; struct iavf_vlan_filter *vlf, *vlftmp; struct iavf_cloud_filter *cf, *cftmp; struct iavf_adv_rss *rss, *rsstmp; struct iavf_mac_filter *f, *ftmp; + struct iavf_adapter *adapter; struct net_device *netdev; struct iavf_hw *hw; - netdev = adapter->netdev; + /* Don't proceed with remove if netdev is already freed */ + netdev = pci_get_drvdata(pdev); + if (!netdev) + return; + + adapter = iavf_pdev_to_adapter(pdev); hw = &adapter->hw; if (test_and_set_bit(__IAVF_IN_REMOVE_TASK, &adapter->crit_section)) @@ -5273,11 +5229,25 @@ static void iavf_remove(struct pci_dev *pdev) destroy_workqueue(adapter->wq); + pci_set_drvdata(pdev, NULL); + free_netdev(netdev); pci_disable_device(pdev); } +/** + * iavf_shutdown - Shutdown the device in preparation for a reboot + * @pdev: pci device structure + **/ +static void iavf_shutdown(struct pci_dev *pdev) +{ + iavf_remove(pdev); + + if (system_state == SYSTEM_POWER_OFF) + pci_set_power_state(pdev, PCI_D3hot); +} + static SIMPLE_DEV_PM_OPS(iavf_pm_ops, iavf_suspend, iavf_resume); static struct pci_driver iavf_driver = { -- cgit v1.2.3 From b65d52ac9c085c0c52dee012a210d4e2f352611b Mon Sep 17 00:00:00 2001 From: Dinghao Liu Date: Sun, 10 Dec 2023 12:52:55 +0800 Subject: qed: Fix a potential use-after-free in qed_cxt_tables_alloc qed_ilt_shadow_alloc() will call qed_ilt_shadow_free() to free p_hwfn->p_cxt_mngr->ilt_shadow on error. However, qed_cxt_tables_alloc() accesses the freed pointer on failure of qed_ilt_shadow_alloc() through calling qed_cxt_mngr_free(), which may lead to use-after-free. Fix this issue by setting p_mngr->ilt_shadow to NULL in qed_ilt_shadow_free(). Fixes: fe56b9e6a8d9 ("qed: Add module with basic common support") Reviewed-by: Przemek Kitszel Signed-off-by: Dinghao Liu Link: https://lore.kernel.org/r/20231210045255.21383-1-dinghao.liu@zju.edu.cn Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/qlogic/qed/qed_cxt.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/ethernet/qlogic/qed/qed_cxt.c b/drivers/net/ethernet/qlogic/qed/qed_cxt.c index 65e20693c549..33f4f58ee51c 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_cxt.c +++ b/drivers/net/ethernet/qlogic/qed/qed_cxt.c @@ -933,6 +933,7 @@ static void qed_ilt_shadow_free(struct qed_hwfn *p_hwfn) p_dma->virt_addr = NULL; } kfree(p_mngr->ilt_shadow); + p_mngr->ilt_shadow = NULL; } static int qed_ilt_blk_alloc(struct qed_hwfn *p_hwfn, -- cgit v1.2.3 From f99cd56230f56c8b6b33713c5be4da5d6766be1f Mon Sep 17 00:00:00 2001 From: Dong Chenchen Date: Sun, 10 Dec 2023 10:02:00 +0800 Subject: net: Remove acked SYN flag from packet in the transmit queue correctly syzkaller report: kernel BUG at net/core/skbuff.c:3452! invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI CPU: 0 PID: 0 Comm: swapper/0 Not tainted 6.7.0-rc4-00009-gbee0e7762ad2-dirty #135 RIP: 0010:skb_copy_and_csum_bits (net/core/skbuff.c:3452) Call Trace: icmp_glue_bits (net/ipv4/icmp.c:357) __ip_append_data.isra.0 (net/ipv4/ip_output.c:1165) ip_append_data (net/ipv4/ip_output.c:1362 net/ipv4/ip_output.c:1341) icmp_push_reply (net/ipv4/icmp.c:370) __icmp_send (./include/net/route.h:252 net/ipv4/icmp.c:772) ip_fragment.constprop.0 (./include/linux/skbuff.h:1234 net/ipv4/ip_output.c:592 net/ipv4/ip_output.c:577) __ip_finish_output (net/ipv4/ip_output.c:311 net/ipv4/ip_output.c:295) ip_output (net/ipv4/ip_output.c:427) __ip_queue_xmit (net/ipv4/ip_output.c:535) __tcp_transmit_skb (net/ipv4/tcp_output.c:1462) __tcp_retransmit_skb (net/ipv4/tcp_output.c:3387) tcp_retransmit_skb (net/ipv4/tcp_output.c:3404) tcp_retransmit_timer (net/ipv4/tcp_timer.c:604) tcp_write_timer (./include/linux/spinlock.h:391 net/ipv4/tcp_timer.c:716) The panic issue was trigered by tcp simultaneous initiation. The initiation process is as follows: TCP A TCP B 1. CLOSED CLOSED 2. SYN-SENT --> ... 3. SYN-RECEIVED <-- <-- SYN-SENT 4. ... --> SYN-RECEIVED 5. SYN-RECEIVED --> ... // TCP B: not send challenge ack for ack limit or packet loss // TCP A: close tcp_close tcp_send_fin if (!tskb && tcp_under_memory_pressure(sk)) tskb = skb_rb_last(&sk->tcp_rtx_queue); //pick SYN_ACK packet TCP_SKB_CB(tskb)->tcp_flags |= TCPHDR_FIN; // set FIN flag 6. FIN_WAIT_1 --> ... // TCP B: send challenge ack to SYN_FIN_ACK 7. ... <-- SYN-RECEIVED //challenge ack // TCP A: 8. FIN_WAIT_1 --> ... // retransmit panic __tcp_retransmit_skb //skb->len=0 tcp_trim_head len = tp->snd_una - TCP_SKB_CB(skb)->seq // len=101-100 __pskb_trim_head skb->data_len -= len // skb->len=-1, wrap around ... ... ip_fragment icmp_glue_bits //BUG_ON If we use tcp_trim_head() to remove acked SYN from packet that contains data or other flags, skb->len will be incorrectly decremented. We can remove SYN flag that has been acked from rtx_queue earlier than tcp_trim_head(), which can fix the problem mentioned above. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Co-developed-by: Eric Dumazet Signed-off-by: Eric Dumazet Signed-off-by: Dong Chenchen Link: https://lore.kernel.org/r/20231210020200.1539875-1-dongchenchen2@huawei.com Signed-off-by: Jakub Kicinski --- net/ipv4/tcp_output.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/net/ipv4/tcp_output.c b/net/ipv4/tcp_output.c index f5ef15e1d9ac..e3167ad96567 100644 --- a/net/ipv4/tcp_output.c +++ b/net/ipv4/tcp_output.c @@ -3293,7 +3293,13 @@ int __tcp_retransmit_skb(struct sock *sk, struct sk_buff *skb, int segs) if (skb_still_in_host_queue(sk, skb)) return -EBUSY; +start: if (before(TCP_SKB_CB(skb)->seq, tp->snd_una)) { + if (unlikely(TCP_SKB_CB(skb)->tcp_flags & TCPHDR_SYN)) { + TCP_SKB_CB(skb)->tcp_flags &= ~TCPHDR_SYN; + TCP_SKB_CB(skb)->seq++; + goto start; + } if (unlikely(before(TCP_SKB_CB(skb)->end_seq, tp->snd_una))) { WARN_ON_ONCE(1); return -EINVAL; -- cgit v1.2.3 From b3ae7b67b87fed771fa5bf95389df06b0433603e Mon Sep 17 00:00:00 2001 From: "Steven Rostedt (Google)" Date: Tue, 12 Dec 2023 11:16:17 -0500 Subject: ring-buffer: Fix writing to the buffer with max_data_size The maximum ring buffer data size is the maximum size of data that can be recorded on the ring buffer. Events must be smaller than the sub buffer data size minus any meta data. This size is checked before trying to allocate from the ring buffer because the allocation assumes that the size will fit on the sub buffer. The maximum size was calculated as the size of a sub buffer page (which is currently PAGE_SIZE minus the sub buffer header) minus the size of the meta data of an individual event. But it missed the possible adding of a time stamp for events that are added long enough apart that the event meta data can't hold the time delta. When an event is added that is greater than the current BUF_MAX_DATA_SIZE minus the size of a time stamp, but still less than or equal to BUF_MAX_DATA_SIZE, the ring buffer would go into an infinite loop, looking for a page that can hold the event. Luckily, there's a check for this loop and after 1000 iterations and a warning is emitted and the ring buffer is disabled. But this should never happen. This can happen when a large event is added first, or after a long period where an absolute timestamp is prefixed to the event, increasing its size by 8 bytes. This passes the check and then goes into the algorithm that causes the infinite loop. For events that are the first event on the sub-buffer, it does not need to add a timestamp, because the sub-buffer itself contains an absolute timestamp, and adding one is redundant. The fix is to check if the event is to be the first event on the sub-buffer, and if it is, then do not add a timestamp. This also fixes 32 bit adding a timestamp when a read of before_stamp or write_stamp is interrupted. There's still no need to add that timestamp if the event is going to be the first event on the sub buffer. Also, if the buffer has "time_stamp_abs" set, then also check if the length plus the timestamp is greater than the BUF_MAX_DATA_SIZE. Link: https://lore.kernel.org/all/20231212104549.58863438@gandalf.local.home/ Link: https://lore.kernel.org/linux-trace-kernel/20231212071837.5fdd6c13@gandalf.local.home Link: https://lore.kernel.org/linux-trace-kernel/20231212111617.39e02849@gandalf.local.home Cc: stable@vger.kernel.org Cc: Mark Rutland Cc: Mathieu Desnoyers Fixes: a4543a2fa9ef3 ("ring-buffer: Get timestamp after event is allocated") Fixes: 58fbc3c63275c ("ring-buffer: Consolidate add_timestamp to remove some branches") Reported-by: Kent Overstreet # (on IRC) Acked-by: Masami Hiramatsu (Google) Signed-off-by: Steven Rostedt (Google) --- kernel/trace/ring_buffer.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/kernel/trace/ring_buffer.c b/kernel/trace/ring_buffer.c index 8d2a4f00eca9..b8986f82eccf 100644 --- a/kernel/trace/ring_buffer.c +++ b/kernel/trace/ring_buffer.c @@ -3579,7 +3579,10 @@ __rb_reserve_next(struct ring_buffer_per_cpu *cpu_buffer, * absolute timestamp. * Don't bother if this is the start of a new page (w == 0). */ - if (unlikely(!a_ok || !b_ok || (info->before != info->after && w))) { + if (!w) { + /* Use the sub-buffer timestamp */ + info->delta = 0; + } else if (unlikely(!a_ok || !b_ok || info->before != info->after)) { info->add_timestamp |= RB_ADD_STAMP_FORCE | RB_ADD_STAMP_EXTEND; info->length += RB_LEN_TIME_EXTEND; } else { @@ -3737,6 +3740,8 @@ rb_reserve_next_event(struct trace_buffer *buffer, if (ring_buffer_time_stamp_abs(cpu_buffer->buffer)) { add_ts_default = RB_ADD_STAMP_ABSOLUTE; info.length += RB_LEN_TIME_EXTEND; + if (info.length > BUF_MAX_DATA_SIZE) + goto out_fail; } else { add_ts_default = RB_ADD_STAMP_NONE; } -- cgit v1.2.3 From b55b0a0d7c4aa2dac3579aa7e6802d1f57445096 Mon Sep 17 00:00:00 2001 From: "Steven Rostedt (Google)" Date: Sat, 9 Dec 2023 17:10:58 -0500 Subject: tracing: Have large events show up as '[LINE TOO BIG]' instead of nothing If a large event was added to the ring buffer that is larger than what the trace_seq can handle, it just drops the output: ~# cat /sys/kernel/tracing/trace # tracer: nop # # entries-in-buffer/entries-written: 2/2 #P:8 # # _-----=> irqs-off/BH-disabled # / _----=> need-resched # | / _---=> hardirq/softirq # || / _--=> preempt-depth # ||| / _-=> migrate-disable # |||| / delay # TASK-PID CPU# ||||| TIMESTAMP FUNCTION # | | | ||||| | | <...>-859 [001] ..... 141.118951: tracing_mark_write <...>-859 [001] ..... 141.148201: tracing_mark_write: 78901234 Instead, catch this case and add some context: ~# cat /sys/kernel/tracing/trace # tracer: nop # # entries-in-buffer/entries-written: 2/2 #P:8 # # _-----=> irqs-off/BH-disabled # / _----=> need-resched # | / _---=> hardirq/softirq # || / _--=> preempt-depth # ||| / _-=> migrate-disable # |||| / delay # TASK-PID CPU# ||||| TIMESTAMP FUNCTION # | | | ||||| | | <...>-852 [001] ..... 121.550551: tracing_mark_write[LINE TOO BIG] <...>-852 [001] ..... 121.550581: tracing_mark_write: 78901234 This now emulates the same output as trace_pipe. Link: https://lore.kernel.org/linux-trace-kernel/20231209171058.78c1a026@gandalf.local.home Cc: Mark Rutland Cc: Mathieu Desnoyers Reviewed-by: Masami Hiramatsu (Google) Signed-off-by: Steven Rostedt (Google) --- kernel/trace/trace.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index fbcd3bafb93e..aa8f99f3e5de 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -4722,7 +4722,11 @@ static int s_show(struct seq_file *m, void *v) iter->leftover = ret; } else { - print_trace_line(iter); + ret = print_trace_line(iter); + if (ret == TRACE_TYPE_PARTIAL_LINE) { + iter->seq.full = 0; + trace_seq_puts(&iter->seq, "[LINE TOO BIG]\n"); + } ret = trace_print_seq(m, &iter->seq); /* * If we overflow the seq_file buffer, then it will -- cgit v1.2.3 From 5eaf7f0589c0d88178f0fbeebe0e0b7108258707 Mon Sep 17 00:00:00 2001 From: Beau Belgrave Date: Sun, 10 Dec 2023 21:35:34 +0000 Subject: eventfs: Fix events beyond NAME_MAX blocking tasks Eventfs uses simple_lookup(), however, it will fail if the name of the entry is beyond NAME_MAX length. When this error is encountered, eventfs still tries to create dentries instead of skipping the dentry creation. When the dentry is attempted to be created in this state d_wait_lookup() will loop forever, waiting for the lookup to be removed. Fix eventfs to return the error in simple_lookup() back to the caller instead of continuing to try to create the dentry. Link: https://lore.kernel.org/linux-trace-kernel/20231210213534.497-1-beaub@linux.microsoft.com Fixes: 63940449555e ("eventfs: Implement eventfs lookup, read, open functions") Link: https://lore.kernel.org/linux-trace-kernel/20231208183601.GA46-beaub@linux.microsoft.com/ Signed-off-by: Beau Belgrave Signed-off-by: Steven Rostedt (Google) --- fs/tracefs/event_inode.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/fs/tracefs/event_inode.c b/fs/tracefs/event_inode.c index 0b90869fd805..43e237864a42 100644 --- a/fs/tracefs/event_inode.c +++ b/fs/tracefs/event_inode.c @@ -546,6 +546,8 @@ static struct dentry *eventfs_root_lookup(struct inode *dir, if (strcmp(ei_child->name, name) != 0) continue; ret = simple_lookup(dir, dentry, flags); + if (IS_ERR(ret)) + goto out; create_dir_dentry(ei, ei_child, ei_dentry, true); created = true; break; @@ -568,6 +570,8 @@ static struct dentry *eventfs_root_lookup(struct inode *dir, if (r <= 0) continue; ret = simple_lookup(dir, dentry, flags); + if (IS_ERR(ret)) + goto out; create_file_dentry(ei, i, ei_dentry, name, mode, cdata, fops, true); break; -- cgit v1.2.3 From 17d801758157bec93f26faaf5ff1a8b9a552d67a Mon Sep 17 00:00:00 2001 From: "Steven Rostedt (Google)" Date: Sun, 10 Dec 2023 22:12:50 -0500 Subject: ring-buffer: Fix memory leak of free page Reading the ring buffer does a swap of a sub-buffer within the ring buffer with a empty sub-buffer. This allows the reader to have full access to the content of the sub-buffer that was swapped out without having to worry about contention with the writer. The readers call ring_buffer_alloc_read_page() to allocate a page that will be used to swap with the ring buffer. When the code is finished with the reader page, it calls ring_buffer_free_read_page(). Instead of freeing the page, it stores it as a spare. Then next call to ring_buffer_alloc_read_page() will return this spare instead of calling into the memory management system to allocate a new page. Unfortunately, on freeing of the ring buffer, this spare page is not freed, and causes a memory leak. Link: https://lore.kernel.org/linux-trace-kernel/20231210221250.7b9cc83c@rorschach.local.home Cc: stable@vger.kernel.org Cc: Mark Rutland Cc: Mathieu Desnoyers Fixes: 73a757e63114d ("ring-buffer: Return reader page back into existing ring buffer") Acked-by: Masami Hiramatsu (Google) Signed-off-by: Steven Rostedt (Google) --- kernel/trace/ring_buffer.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/kernel/trace/ring_buffer.c b/kernel/trace/ring_buffer.c index b8986f82eccf..dcd47895b424 100644 --- a/kernel/trace/ring_buffer.c +++ b/kernel/trace/ring_buffer.c @@ -1787,6 +1787,8 @@ static void rb_free_cpu_buffer(struct ring_buffer_per_cpu *cpu_buffer) free_buffer_page(bpage); } + free_page((unsigned long)cpu_buffer->free_page); + kfree(cpu_buffer); } -- cgit v1.2.3 From d06aff1cb13d2a0d52b48e605462518149c98c81 Mon Sep 17 00:00:00 2001 From: "Steven Rostedt (Google)" Date: Sun, 10 Dec 2023 22:54:47 -0500 Subject: tracing: Update snapshot buffer on resize if it is allocated The snapshot buffer is to mimic the main buffer so that when a snapshot is needed, the snapshot and main buffer are swapped. When the snapshot buffer is allocated, it is set to the minimal size that the ring buffer may be at and still functional. When it is allocated it becomes the same size as the main ring buffer, and when the main ring buffer changes in size, it should do. Currently, the resize only updates the snapshot buffer if it's used by the current tracer (ie. the preemptirqsoff tracer). But it needs to be updated anytime it is allocated. When changing the size of the main buffer, instead of looking to see if the current tracer is utilizing the snapshot buffer, just check if it is allocated to know if it should be updated or not. Also fix typo in comment just above the code change. Link: https://lore.kernel.org/linux-trace-kernel/20231210225447.48476a6a@rorschach.local.home Cc: stable@vger.kernel.org Cc: Mark Rutland Cc: Mathieu Desnoyers Fixes: ad909e21bbe69 ("tracing: Add internal tracing_snapshot() functions") Reviewed-by: Masami Hiramatsu (Google) Signed-off-by: Steven Rostedt (Google) --- kernel/trace/trace.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index aa8f99f3e5de..6c79548f9574 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -6348,7 +6348,7 @@ static int __tracing_resize_ring_buffer(struct trace_array *tr, if (!tr->array_buffer.buffer) return 0; - /* Do not allow tracing while resizng ring buffer */ + /* Do not allow tracing while resizing ring buffer */ tracing_stop_tr(tr); ret = ring_buffer_resize(tr->array_buffer.buffer, size, cpu); @@ -6356,7 +6356,7 @@ static int __tracing_resize_ring_buffer(struct trace_array *tr, goto out_start; #ifdef CONFIG_TRACER_MAX_TRACE - if (!tr->current_trace->use_max_tr) + if (!tr->allocated_snapshot) goto out; ret = ring_buffer_resize(tr->max_buffer.buffer, size, cpu); -- cgit v1.2.3 From 41db6f99b5489a0d2ef26afe816ef0c6118d1d47 Mon Sep 17 00:00:00 2001 From: David Arinzon Date: Mon, 11 Dec 2023 06:27:58 +0000 Subject: net: ena: Destroy correct number of xdp queues upon failure The ena_setup_and_create_all_xdp_queues() function freed all the resources upon failure, after creating only xdp_num_queues queues, instead of freeing just the created ones. In this patch, the only resources that are freed, are the ones allocated right before the failure occurs. Fixes: 548c4940b9f1 ("net: ena: Implement XDP_TX action") Signed-off-by: Shahar Itzko Signed-off-by: David Arinzon Link: https://lore.kernel.org/r/20231211062801.27891-2-darinzon@amazon.com Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/amazon/ena/ena_netdev.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) diff --git a/drivers/net/ethernet/amazon/ena/ena_netdev.c b/drivers/net/ethernet/amazon/ena/ena_netdev.c index b5bca4814830..9884ef38f18a 100644 --- a/drivers/net/ethernet/amazon/ena/ena_netdev.c +++ b/drivers/net/ethernet/amazon/ena/ena_netdev.c @@ -74,6 +74,8 @@ static void ena_unmap_tx_buff(struct ena_ring *tx_ring, struct ena_tx_buffer *tx_info); static int ena_create_io_tx_queues_in_range(struct ena_adapter *adapter, int first_index, int count); +static void ena_free_all_io_tx_resources_in_range(struct ena_adapter *adapter, + int first_index, int count); /* Increase a stat by cnt while holding syncp seqlock on 32bit machines */ static void ena_increase_stat(u64 *statp, u64 cnt, @@ -457,23 +459,22 @@ static void ena_init_all_xdp_queues(struct ena_adapter *adapter) static int ena_setup_and_create_all_xdp_queues(struct ena_adapter *adapter) { + u32 xdp_first_ring = adapter->xdp_first_ring; + u32 xdp_num_queues = adapter->xdp_num_queues; int rc = 0; - rc = ena_setup_tx_resources_in_range(adapter, adapter->xdp_first_ring, - adapter->xdp_num_queues); + rc = ena_setup_tx_resources_in_range(adapter, xdp_first_ring, xdp_num_queues); if (rc) goto setup_err; - rc = ena_create_io_tx_queues_in_range(adapter, - adapter->xdp_first_ring, - adapter->xdp_num_queues); + rc = ena_create_io_tx_queues_in_range(adapter, xdp_first_ring, xdp_num_queues); if (rc) goto create_err; return 0; create_err: - ena_free_all_io_tx_resources(adapter); + ena_free_all_io_tx_resources_in_range(adapter, xdp_first_ring, xdp_num_queues); setup_err: return rc; } -- cgit v1.2.3 From 505b1a88d311ff6f8c44a34f94e3be21745cce6f Mon Sep 17 00:00:00 2001 From: David Arinzon Date: Mon, 11 Dec 2023 06:27:59 +0000 Subject: net: ena: Fix xdp drops handling due to multibuf packets Current xdp code drops packets larger than ENA_XDP_MAX_MTU. This is an incorrect condition since the problem is not the size of the packet, rather the number of buffers it contains. This commit: 1. Identifies and drops XDP multi-buffer packets at the beginning of the function. 2. Increases the xdp drop statistic when this drop occurs. 3. Adds a one-time print that such drops are happening to give better indication to the user. Fixes: 838c93dc5449 ("net: ena: implement XDP drop support") Signed-off-by: Arthur Kiyanovski Signed-off-by: David Arinzon Link: https://lore.kernel.org/r/20231211062801.27891-3-darinzon@amazon.com Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/amazon/ena/ena_netdev.c | 17 ++++++++++------- 1 file changed, 10 insertions(+), 7 deletions(-) diff --git a/drivers/net/ethernet/amazon/ena/ena_netdev.c b/drivers/net/ethernet/amazon/ena/ena_netdev.c index 9884ef38f18a..c7bc5720d16d 100644 --- a/drivers/net/ethernet/amazon/ena/ena_netdev.c +++ b/drivers/net/ethernet/amazon/ena/ena_netdev.c @@ -1672,20 +1672,23 @@ static void ena_set_rx_hash(struct ena_ring *rx_ring, } } -static int ena_xdp_handle_buff(struct ena_ring *rx_ring, struct xdp_buff *xdp) +static int ena_xdp_handle_buff(struct ena_ring *rx_ring, struct xdp_buff *xdp, u16 num_descs) { struct ena_rx_buffer *rx_info; int ret; + /* XDP multi-buffer packets not supported */ + if (unlikely(num_descs > 1)) { + netdev_err_once(rx_ring->adapter->netdev, + "xdp: dropped unsupported multi-buffer packets\n"); + ena_increase_stat(&rx_ring->rx_stats.xdp_drop, 1, &rx_ring->syncp); + return ENA_XDP_DROP; + } + rx_info = &rx_ring->rx_buffer_info[rx_ring->ena_bufs[0].req_id]; xdp_prepare_buff(xdp, page_address(rx_info->page), rx_info->buf_offset, rx_ring->ena_bufs[0].len, false); - /* If for some reason we received a bigger packet than - * we expect, then we simply drop it - */ - if (unlikely(rx_ring->ena_bufs[0].len > ENA_XDP_MAX_MTU)) - return ENA_XDP_DROP; ret = ena_xdp_execute(rx_ring, xdp); @@ -1754,7 +1757,7 @@ static int ena_clean_rx_irq(struct ena_ring *rx_ring, struct napi_struct *napi, ena_rx_ctx.l4_proto, ena_rx_ctx.hash); if (ena_xdp_present_ring(rx_ring)) - xdp_verdict = ena_xdp_handle_buff(rx_ring, &xdp); + xdp_verdict = ena_xdp_handle_buff(rx_ring, &xdp, ena_rx_ctx.descs); /* allocate skb and fill it */ if (xdp_verdict == ENA_XDP_PASS) -- cgit v1.2.3 From d760117060cf2e90b5c59c5492cab179a4dbce01 Mon Sep 17 00:00:00 2001 From: David Arinzon Date: Mon, 11 Dec 2023 06:28:00 +0000 Subject: net: ena: Fix DMA syncing in XDP path when SWIOTLB is on This patch fixes two issues: Issue 1 ------- Description ``````````` Current code does not call dma_sync_single_for_cpu() to sync data from the device side memory to the CPU side memory before the XDP code path uses the CPU side data. This causes the XDP code path to read the unset garbage data in the CPU side memory, resulting in incorrect handling of the packet by XDP. Solution ```````` 1. Add a call to dma_sync_single_for_cpu() before the XDP code starts to use the data in the CPU side memory. 2. The XDP code verdict can be XDP_PASS, in which case there is a fallback to the non-XDP code, which also calls dma_sync_single_for_cpu(). To avoid calling dma_sync_single_for_cpu() twice: 2.1. Put the dma_sync_single_for_cpu() in the code in such a place where it happens before XDP and non-XDP code. 2.2. Remove the calls to dma_sync_single_for_cpu() in the non-XDP code for the first buffer only (rx_copybreak and non-rx_copybreak cases), since the new call that was added covers these cases. The call to dma_sync_single_for_cpu() for the second buffer and on stays because only the first buffer is handled by the newly added dma_sync_single_for_cpu(). And there is no need for special handling of the second buffer and on for the XDP path since currently the driver supports only single buffer packets. Issue 2 ------- Description ``````````` In case the XDP code forwarded the packet (ENA_XDP_FORWARDED), ena_unmap_rx_buff_attrs() is called with attrs set to 0. This means that before unmapping the buffer, the internal function dma_unmap_page_attrs() will also call dma_sync_single_for_cpu() on the whole buffer (not only on the data part of it). This sync is both wasteful (since a sync was already explicitly called before) and also causes a bug, which will be explained using the below diagram. The following diagram shows the flow of events causing the bug. The order of events is (1)-(4) as shown in the diagram. CPU side memory area (3)convert_to_xdp_frame() initializes the headroom with xdpf metadata || \/ ___________________________________ | | 0 | V 4K --------------------------------------------------------------------- | xdpf->data | other xdpf | < data > | tailroom ||...| | | fields | | GARBAGE || | --------------------------------------------------------------------- /\ /\ || || (4)ena_unmap_rx_buff_attrs() calls (2)dma_sync_single_for_cpu() dma_sync_single_for_cpu() on the copies data from device whole buffer page, overwriting side to CPU side memory the xdpf->data with GARBAGE. || 0 4K --------------------------------------------------------------------- | headroom | < data > | tailroom ||...| | GARBAGE | | GARBAGE || | --------------------------------------------------------------------- Device side memory area /\ || (1) device writes RX packet data After the call to ena_unmap_rx_buff_attrs() in (4), the xdpf->data becomes corrupted, and so when it is later accessed in ena_clean_xdp_irq()->xdp_return_frame(), it causes a page fault, crashing the kernel. Solution ```````` Explicitly tell ena_unmap_rx_buff_attrs() not to call dma_sync_single_for_cpu() by passing it the ENA_DMA_ATTR_SKIP_CPU_SYNC flag. Fixes: f7d625adeb7b ("net: ena: Add dynamic recycling mechanism for rx buffers") Signed-off-by: Arthur Kiyanovski Signed-off-by: David Arinzon Link: https://lore.kernel.org/r/20231211062801.27891-4-darinzon@amazon.com Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/amazon/ena/ena_netdev.c | 23 +++++++++-------------- 1 file changed, 9 insertions(+), 14 deletions(-) diff --git a/drivers/net/ethernet/amazon/ena/ena_netdev.c b/drivers/net/ethernet/amazon/ena/ena_netdev.c index c7bc5720d16d..c44c44e26ddf 100644 --- a/drivers/net/ethernet/amazon/ena/ena_netdev.c +++ b/drivers/net/ethernet/amazon/ena/ena_netdev.c @@ -1493,11 +1493,6 @@ static struct sk_buff *ena_rx_skb(struct ena_ring *rx_ring, if (unlikely(!skb)) return NULL; - /* sync this buffer for CPU use */ - dma_sync_single_for_cpu(rx_ring->dev, - dma_unmap_addr(&rx_info->ena_buf, paddr) + pkt_offset, - len, - DMA_FROM_DEVICE); skb_copy_to_linear_data(skb, buf_addr + buf_offset, len); dma_sync_single_for_device(rx_ring->dev, dma_unmap_addr(&rx_info->ena_buf, paddr) + pkt_offset, @@ -1516,17 +1511,10 @@ static struct sk_buff *ena_rx_skb(struct ena_ring *rx_ring, buf_len = SKB_DATA_ALIGN(len + buf_offset + tailroom); - pre_reuse_paddr = dma_unmap_addr(&rx_info->ena_buf, paddr); - /* If XDP isn't loaded try to reuse part of the RX buffer */ reuse_rx_buf_page = !is_xdp_loaded && ena_try_rx_buf_page_reuse(rx_info, buf_len, len, pkt_offset); - dma_sync_single_for_cpu(rx_ring->dev, - pre_reuse_paddr + pkt_offset, - len, - DMA_FROM_DEVICE); - if (!reuse_rx_buf_page) ena_unmap_rx_buff_attrs(rx_ring, rx_info, DMA_ATTR_SKIP_CPU_SYNC); @@ -1723,6 +1711,7 @@ static int ena_clean_rx_irq(struct ena_ring *rx_ring, struct napi_struct *napi, int xdp_flags = 0; int total_len = 0; int xdp_verdict; + u8 pkt_offset; int rc = 0; int i; @@ -1749,13 +1738,19 @@ static int ena_clean_rx_irq(struct ena_ring *rx_ring, struct napi_struct *napi, /* First descriptor might have an offset set by the device */ rx_info = &rx_ring->rx_buffer_info[rx_ring->ena_bufs[0].req_id]; - rx_info->buf_offset += ena_rx_ctx.pkt_offset; + pkt_offset = ena_rx_ctx.pkt_offset; + rx_info->buf_offset += pkt_offset; netif_dbg(rx_ring->adapter, rx_status, rx_ring->netdev, "rx_poll: q %d got packet from ena. descs #: %d l3 proto %d l4 proto %d hash: %x\n", rx_ring->qid, ena_rx_ctx.descs, ena_rx_ctx.l3_proto, ena_rx_ctx.l4_proto, ena_rx_ctx.hash); + dma_sync_single_for_cpu(rx_ring->dev, + dma_unmap_addr(&rx_info->ena_buf, paddr) + pkt_offset, + rx_ring->ena_bufs[0].len, + DMA_FROM_DEVICE); + if (ena_xdp_present_ring(rx_ring)) xdp_verdict = ena_xdp_handle_buff(rx_ring, &xdp, ena_rx_ctx.descs); @@ -1781,7 +1776,7 @@ static int ena_clean_rx_irq(struct ena_ring *rx_ring, struct napi_struct *napi, if (xdp_verdict & ENA_XDP_FORWARDED) { ena_unmap_rx_buff_attrs(rx_ring, &rx_ring->rx_buffer_info[req_id], - 0); + DMA_ATTR_SKIP_CPU_SYNC); rx_ring->rx_buffer_info[req_id].page = NULL; } } -- cgit v1.2.3 From 4ab138ca0a340e6d6e7a6a9bd5004bd8f83127ca Mon Sep 17 00:00:00 2001 From: David Arinzon Date: Mon, 11 Dec 2023 06:28:01 +0000 Subject: net: ena: Fix XDP redirection error When sending TX packets, the meta descriptor can be all zeroes as no meta information is required (as in XDP). This patch removes the validity check, as when `disable_meta_caching` is enabled, such TX packets will be dropped otherwise. Fixes: 0e3a3f6dacf0 ("net: ena: support new LLQ acceleration mode") Signed-off-by: Shay Agroskin Signed-off-by: David Arinzon Link: https://lore.kernel.org/r/20231211062801.27891-5-darinzon@amazon.com Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/amazon/ena/ena_eth_com.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/drivers/net/ethernet/amazon/ena/ena_eth_com.c b/drivers/net/ethernet/amazon/ena/ena_eth_com.c index 3d6f0a466a9e..f9f886289b97 100644 --- a/drivers/net/ethernet/amazon/ena/ena_eth_com.c +++ b/drivers/net/ethernet/amazon/ena/ena_eth_com.c @@ -328,9 +328,6 @@ static int ena_com_create_and_store_tx_meta_desc(struct ena_com_io_sq *io_sq, * compare it to the stored version, just create the meta */ if (io_sq->disable_meta_caching) { - if (unlikely(!ena_tx_ctx->meta_valid)) - return -EINVAL; - *have_meta = true; return ena_com_create_meta(io_sq, ena_meta); } -- cgit v1.2.3 From 65c95f78917ea6fa7ff189a2c19879c4fe161873 Mon Sep 17 00:00:00 2001 From: Jiri Pirko Date: Mon, 11 Dec 2023 09:37:58 +0100 Subject: dpll: sanitize possible null pointer dereference in dpll_pin_parent_pin_set() User may not pass DPLL_A_PIN_STATE attribute in the pin set operation message. Sanitize that by checking if the attr pointer is not null and process the passed state attribute value only in that case. Reported-by: Xingyuan Mo Fixes: 9d71b54b65b1 ("dpll: netlink: Add DPLL framework base functions") Signed-off-by: Jiri Pirko Acked-by: Vadim Fedorenko Link: https://lore.kernel.org/r/20231211083758.1082853-1-jiri@resnulli.us Signed-off-by: Jakub Kicinski --- drivers/dpll/dpll_netlink.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) diff --git a/drivers/dpll/dpll_netlink.c b/drivers/dpll/dpll_netlink.c index 442a0ebeb953..ce7cf736f020 100644 --- a/drivers/dpll/dpll_netlink.c +++ b/drivers/dpll/dpll_netlink.c @@ -925,7 +925,6 @@ dpll_pin_parent_pin_set(struct dpll_pin *pin, struct nlattr *parent_nest, struct netlink_ext_ack *extack) { struct nlattr *tb[DPLL_A_PIN_MAX + 1]; - enum dpll_pin_state state; u32 ppin_idx; int ret; @@ -936,10 +935,14 @@ dpll_pin_parent_pin_set(struct dpll_pin *pin, struct nlattr *parent_nest, return -EINVAL; } ppin_idx = nla_get_u32(tb[DPLL_A_PIN_PARENT_ID]); - state = nla_get_u32(tb[DPLL_A_PIN_STATE]); - ret = dpll_pin_on_pin_state_set(pin, ppin_idx, state, extack); - if (ret) - return ret; + + if (tb[DPLL_A_PIN_STATE]) { + enum dpll_pin_state state = nla_get_u32(tb[DPLL_A_PIN_STATE]); + + ret = dpll_pin_on_pin_state_set(pin, ppin_idx, state, extack); + if (ret) + return ret; + } return 0; } -- cgit v1.2.3 From c41bd2514184d75db087fe4c1221237fb7922875 Mon Sep 17 00:00:00 2001 From: Ignat Korchagin Date: Wed, 29 Nov 2023 22:04:09 +0000 Subject: kexec: drop dependency on ARCH_SUPPORTS_KEXEC from CRASH_DUMP In commit f8ff23429c62 ("kernel/Kconfig.kexec: drop select of KEXEC for CRASH_DUMP") we tried to fix a config regression, where CONFIG_CRASH_DUMP required CONFIG_KEXEC. However, it was not enough at least for arm64 platforms. While further testing the patch with our arm64 config I noticed that CONFIG_CRASH_DUMP is unavailable in menuconfig. This is because CONFIG_CRASH_DUMP still depends on the new CONFIG_ARCH_SUPPORTS_KEXEC introduced in commit 91506f7e5d21 ("arm64/kexec: refactor for kernel/Kconfig.kexec") and on arm64 CONFIG_ARCH_SUPPORTS_KEXEC requires CONFIG_PM_SLEEP_SMP=y, which in turn requires either CONFIG_SUSPEND=y or CONFIG_HIBERNATION=y neither of which are set in our config. Given that we already established that CONFIG_KEXEC (which is a switch for kexec system call itself) is not required for CONFIG_CRASH_DUMP drop CONFIG_ARCH_SUPPORTS_KEXEC dependency as well. The arm64 kernel builds just fine with CONFIG_CRASH_DUMP=y and with both CONFIG_KEXEC=n and CONFIG_KEXEC_FILE=n after f8ff23429c62 ("kernel/Kconfig.kexec: drop select of KEXEC for CRASH_DUMP") and this patch are applied given that the necessary shared bits are included via CONFIG_KEXEC_CORE dependency. [bhe@redhat.com: don't export some symbols when CONFIG_MMU=n] Link: https://lkml.kernel.org/r/ZW03ODUKGGhP1ZGU@MiWiFi-R3L-srv [bhe@redhat.com: riscv, kexec: fix dependency of two items] Link: https://lkml.kernel.org/r/ZW04G/SKnhbE5mnX@MiWiFi-R3L-srv Link: https://lkml.kernel.org/r/20231129220409.55006-1-ignat@cloudflare.com Fixes: 91506f7e5d21 ("arm64/kexec: refactor for kernel/Kconfig.kexec") Signed-off-by: Ignat Korchagin Signed-off-by: Baoquan He Acked-by: Baoquan He Cc: Alexander Gordeev Cc: # 6.6+: f8ff234: kernel/Kconfig.kexec: drop select of KEXEC for CRASH_DUMP Cc: # 6.6+ Signed-off-by: Andrew Morton --- arch/riscv/Kconfig | 4 ++-- arch/riscv/kernel/crash_core.c | 4 +++- kernel/Kconfig.kexec | 1 - 3 files changed, 5 insertions(+), 4 deletions(-) diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig index 95a2a06acc6a..24c1799e2ec4 100644 --- a/arch/riscv/Kconfig +++ b/arch/riscv/Kconfig @@ -685,7 +685,7 @@ config RISCV_BOOT_SPINWAIT If unsure what to do here, say N. config ARCH_SUPPORTS_KEXEC - def_bool MMU + def_bool y config ARCH_SELECTS_KEXEC def_bool y @@ -693,7 +693,7 @@ config ARCH_SELECTS_KEXEC select HOTPLUG_CPU if SMP config ARCH_SUPPORTS_KEXEC_FILE - def_bool 64BIT && MMU + def_bool 64BIT config ARCH_SELECTS_KEXEC_FILE def_bool y diff --git a/arch/riscv/kernel/crash_core.c b/arch/riscv/kernel/crash_core.c index 55f1d7856b54..8706736fd4e2 100644 --- a/arch/riscv/kernel/crash_core.c +++ b/arch/riscv/kernel/crash_core.c @@ -5,17 +5,19 @@ void arch_crash_save_vmcoreinfo(void) { - VMCOREINFO_NUMBER(VA_BITS); VMCOREINFO_NUMBER(phys_ram_base); vmcoreinfo_append_str("NUMBER(PAGE_OFFSET)=0x%lx\n", PAGE_OFFSET); vmcoreinfo_append_str("NUMBER(VMALLOC_START)=0x%lx\n", VMALLOC_START); vmcoreinfo_append_str("NUMBER(VMALLOC_END)=0x%lx\n", VMALLOC_END); +#ifdef CONFIG_MMU + VMCOREINFO_NUMBER(VA_BITS); vmcoreinfo_append_str("NUMBER(VMEMMAP_START)=0x%lx\n", VMEMMAP_START); vmcoreinfo_append_str("NUMBER(VMEMMAP_END)=0x%lx\n", VMEMMAP_END); #ifdef CONFIG_64BIT vmcoreinfo_append_str("NUMBER(MODULES_VADDR)=0x%lx\n", MODULES_VADDR); vmcoreinfo_append_str("NUMBER(MODULES_END)=0x%lx\n", MODULES_END); +#endif #endif vmcoreinfo_append_str("NUMBER(KERNEL_LINK_ADDR)=0x%lx\n", KERNEL_LINK_ADDR); vmcoreinfo_append_str("NUMBER(va_kernel_pa_offset)=0x%lx\n", diff --git a/kernel/Kconfig.kexec b/kernel/Kconfig.kexec index 1cc3b1c595d7..2fd510256604 100644 --- a/kernel/Kconfig.kexec +++ b/kernel/Kconfig.kexec @@ -94,7 +94,6 @@ config KEXEC_JUMP config CRASH_DUMP bool "kernel crash dumps" depends on ARCH_SUPPORTS_CRASH_DUMP - depends on ARCH_SUPPORTS_KEXEC select CRASH_CORE select KEXEC_CORE help -- cgit v1.2.3 From ac88ff6b9d7dea9f0907c86bdae204dde7d5c0e6 Mon Sep 17 00:00:00 2001 From: Baoquan He Date: Tue, 5 Dec 2023 11:02:55 +0800 Subject: riscv: fix VMALLOC_START definition When below config items are set, compiler complained: -------------------- CONFIG_CRASH_CORE=y CONFIG_KEXEC_CORE=y CONFIG_CRASH_DUMP=y ...... ----------------------- ------------------------------------------------------------------- arch/riscv/kernel/crash_core.c: In function 'arch_crash_save_vmcoreinfo': arch/riscv/kernel/crash_core.c:11:58: warning: format '%lx' expects argument of type 'long unsigned int', but argument 2 has type 'int' [-Wformat=] 11 | vmcoreinfo_append_str("NUMBER(VMALLOC_START)=0x%lx\n", VMALLOC_START); | ~~^ | | | long unsigned int | %x ---------------------------------------------------------------------- This is because on riscv macro VMALLOC_START has different type when CONFIG_MMU is set or unset. arch/riscv/include/asm/pgtable.h: -------------------------------------------------- Changing it to _AC(0, UL) in case CONFIG_MMU=n can fix the warning. Link: https://lkml.kernel.org/r/ZW7OsX4zQRA3mO4+@MiWiFi-R3L-srv Signed-off-by: Baoquan He Reported-by: Randy Dunlap Acked-by: Randy Dunlap Tested-by: Randy Dunlap # build-tested Cc: Eric DeVolder Cc: Ignat Korchagin Cc: Stephen Rothwell Cc: Paul Walmsley Cc: Palmer Dabbelt Cc: Albert Ou Signed-off-by: Andrew Morton --- arch/riscv/include/asm/pgtable.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/riscv/include/asm/pgtable.h b/arch/riscv/include/asm/pgtable.h index 294044429e8e..ab00235b018f 100644 --- a/arch/riscv/include/asm/pgtable.h +++ b/arch/riscv/include/asm/pgtable.h @@ -899,7 +899,7 @@ static inline pte_t pte_swp_clear_exclusive(pte_t pte) #define PAGE_KERNEL __pgprot(0) #define swapper_pg_dir NULL #define TASK_SIZE 0xffffffffUL -#define VMALLOC_START 0 +#define VMALLOC_START _AC(0, UL) #define VMALLOC_END TASK_SIZE #endif /* !CONFIG_MMU */ -- cgit v1.2.3 From d3bb89ea9c13e5a98d2b7a0ba8e50a77893132cb Mon Sep 17 00:00:00 2001 From: Kefeng Wang Date: Thu, 7 Dec 2023 23:25:25 +0800 Subject: mm: fix VMA heap bounds checking After converting selinux to VMA heap check helper, the gcl triggers an execheap SELinux denial, which is caused by a changed logic check. Previously selinux only checked that the VMA range was within the VMA heap range, and the implementation checks the intersection between the two ranges, but the corner case (vm_end=start_brk, brk=vm_start) isn't handled correctly. Since commit 11250fd12eb8 ("mm: factor out VMA stack and heap checks") was only a function extraction, it seems that the issue was introduced by commit 0db0c01b53a1 ("procfs: fix /proc//maps heap check"). Let's fix above corner cases, meanwhile, correct the wrong indentation of the stack and heap check helpers. Fixes: 11250fd12eb8 ("mm: factor out VMA stack and heap checks") Signed-off-by: Kefeng Wang Reported-by: Ondrej Mosnacek Closes: https://lore.kernel.org/selinux/CAFqZXNv0SVT0fkOK6neP9AXbj3nxJ61JAY4+zJzvxqJaeuhbFw@mail.gmail.com/ Tested-by: Ondrej Mosnacek Link: https://lkml.kernel.org/r/20231207152525.2607420-1-wangkefeng.wang@huawei.com Cc: David Hildenbrand Cc: Paul Moore Cc: Peter Zijlstra Cc: Stephen Smalley Signed-off-by: Andrew Morton --- include/linux/mm.h | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/include/linux/mm.h b/include/linux/mm.h index 418d26608ece..da5219b48d52 100644 --- a/include/linux/mm.h +++ b/include/linux/mm.h @@ -886,8 +886,8 @@ static inline bool vma_is_anonymous(struct vm_area_struct *vma) */ static inline bool vma_is_initial_heap(const struct vm_area_struct *vma) { - return vma->vm_start <= vma->vm_mm->brk && - vma->vm_end >= vma->vm_mm->start_brk; + return vma->vm_start < vma->vm_mm->brk && + vma->vm_end > vma->vm_mm->start_brk; } /* @@ -901,8 +901,8 @@ static inline bool vma_is_initial_stack(const struct vm_area_struct *vma) * its "stack". It's not even well-defined for programs written * languages like Go. */ - return vma->vm_start <= vma->vm_mm->start_stack && - vma->vm_end >= vma->vm_mm->start_stack; + return vma->vm_start <= vma->vm_mm->start_stack && + vma->vm_end >= vma->vm_mm->start_stack; } static inline bool vma_is_temporary_stack(struct vm_area_struct *vma) -- cgit v1.2.3 From a6fcd57cf2df409d35e9225b8dbad6f937b28df0 Mon Sep 17 00:00:00 2001 From: David Hildenbrand Date: Wed, 6 Dec 2023 11:35:58 +0100 Subject: selftests/mm: cow: print ksft header before printing anything else Doing a ksft_print_msg() before the ksft_print_header() seems to confuse the ksft framework in a strange way: running the test on the cmdline results in the expected output. But piping the output somewhere else, results in some odd output, whereby we repeatedly get the same info printed: # [INFO] detected THP size: 2048 KiB # [INFO] detected hugetlb page size: 2048 KiB # [INFO] detected hugetlb page size: 1048576 KiB # [INFO] huge zeropage is enabled TAP version 13 1..190 # [INFO] Anonymous memory tests in private mappings # [RUN] Basic COW after fork() ... with base page # [INFO] detected THP size: 2048 KiB # [INFO] detected hugetlb page size: 2048 KiB # [INFO] detected hugetlb page size: 1048576 KiB # [INFO] huge zeropage is enabled TAP version 13 1..190 # [INFO] Anonymous memory tests in private mappings # [RUN] Basic COW after fork() ... with base page ok 1 No leak from parent into child # [RUN] Basic COW after fork() ... with swapped out base page # [INFO] detected THP size: 2048 KiB # [INFO] detected hugetlb page size: 2048 KiB # [INFO] detected hugetlb page size: 1048576 KiB # [INFO] huge zeropage is enabled Doing the ksft_print_header() first seems to resolve that and gives us the output we expect: TAP version 13 # [INFO] detected THP size: 2048 KiB # [INFO] detected hugetlb page size: 2048 KiB # [INFO] detected hugetlb page size: 1048576 KiB # [INFO] huge zeropage is enabled 1..190 # [INFO] Anonymous memory tests in private mappings # [RUN] Basic COW after fork() ... with base page ok 1 No leak from parent into child # [RUN] Basic COW after fork() ... with swapped out base page ok 2 No leak from parent into child # [RUN] Basic COW after fork() ... with THP ok 3 No leak from parent into child # [RUN] Basic COW after fork() ... with swapped-out THP ok 4 No leak from parent into child # [RUN] Basic COW after fork() ... with PTE-mapped THP ok 5 No leak from parent into child Link: https://lkml.kernel.org/r/20231206103558.38040-1-david@redhat.com Fixes: f4b5fd6946e2 ("selftests/vm: anon_cow: THP tests") Signed-off-by: David Hildenbrand Reported-by: Nico Pache Signed-off-by: Andrew Morton --- tools/testing/selftests/mm/cow.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/tools/testing/selftests/mm/cow.c b/tools/testing/selftests/mm/cow.c index 7324ce5363c0..6f2f83990441 100644 --- a/tools/testing/selftests/mm/cow.c +++ b/tools/testing/selftests/mm/cow.c @@ -1680,6 +1680,8 @@ int main(int argc, char **argv) { int err; + ksft_print_header(); + pagesize = getpagesize(); thpsize = read_pmd_pagesize(); if (thpsize) @@ -1689,7 +1691,6 @@ int main(int argc, char **argv) ARRAY_SIZE(hugetlbsizes)); detect_huge_zeropage(); - ksft_print_header(); ksft_set_plan(ARRAY_SIZE(anon_test_cases) * tests_per_anon_test_case() + ARRAY_SIZE(anon_thp_test_cases) * tests_per_anon_thp_test_case() + ARRAY_SIZE(non_anon_test_cases) * tests_per_non_anon_test_case()); -- cgit v1.2.3 From 6376a824595607e99d032a39ba3394988b4fce96 Mon Sep 17 00:00:00 2001 From: SeongJae Park Date: Fri, 8 Dec 2023 17:50:18 +0000 Subject: mm/damon/core: make damon_start() waits until kdamond_fn() starts The cleanup tasks of kdamond threads including reset of corresponding DAMON context's ->kdamond field and decrease of global nr_running_ctxs counter is supposed to be executed by kdamond_fn(). However, commit 0f91d13366a4 ("mm/damon: simplify stop mechanism") made neither damon_start() nor damon_stop() ensure the corresponding kdamond has started the execution of kdamond_fn(). As a result, the cleanup can be skipped if damon_stop() is called fast enough after the previous damon_start(). Especially the skipped reset of ->kdamond could cause a use-after-free. Fix it by waiting for start of kdamond_fn() execution from damon_start(). Link: https://lkml.kernel.org/r/20231208175018.63880-1-sj@kernel.org Fixes: 0f91d13366a4 ("mm/damon: simplify stop mechanism") Signed-off-by: SeongJae Park Reported-by: Jakub Acs Cc: Changbin Du Cc: Jakub Acs Cc: # 5.15.x Signed-off-by: Andrew Morton --- include/linux/damon.h | 2 ++ mm/damon/core.c | 6 ++++++ 2 files changed, 8 insertions(+) diff --git a/include/linux/damon.h b/include/linux/damon.h index ab2f17d9926b..e00ddf1ed39c 100644 --- a/include/linux/damon.h +++ b/include/linux/damon.h @@ -559,6 +559,8 @@ struct damon_ctx { * update */ unsigned long next_ops_update_sis; + /* for waiting until the execution of the kdamond_fn is started */ + struct completion kdamond_started; /* public: */ struct task_struct *kdamond; diff --git a/mm/damon/core.c b/mm/damon/core.c index ce1562783e7e..3a05e71509b9 100644 --- a/mm/damon/core.c +++ b/mm/damon/core.c @@ -445,6 +445,8 @@ struct damon_ctx *damon_new_ctx(void) if (!ctx) return NULL; + init_completion(&ctx->kdamond_started); + ctx->attrs.sample_interval = 5 * 1000; ctx->attrs.aggr_interval = 100 * 1000; ctx->attrs.ops_update_interval = 60 * 1000 * 1000; @@ -668,11 +670,14 @@ static int __damon_start(struct damon_ctx *ctx) mutex_lock(&ctx->kdamond_lock); if (!ctx->kdamond) { err = 0; + reinit_completion(&ctx->kdamond_started); ctx->kdamond = kthread_run(kdamond_fn, ctx, "kdamond.%d", nr_running_ctxs); if (IS_ERR(ctx->kdamond)) { err = PTR_ERR(ctx->kdamond); ctx->kdamond = NULL; + } else { + wait_for_completion(&ctx->kdamond_started); } } mutex_unlock(&ctx->kdamond_lock); @@ -1433,6 +1438,7 @@ static int kdamond_fn(void *data) pr_debug("kdamond (%d) starts\n", current->pid); + complete(&ctx->kdamond_started); kdamond_init_intervals_sis(ctx); if (ctx->ops.init) -- cgit v1.2.3 From 655fc6cd45521aba4a21c6e607533f1a21e06c2e Mon Sep 17 00:00:00 2001 From: Baoquan He Date: Fri, 8 Dec 2023 15:30:32 +0800 Subject: loongarch, kexec: change dependency of object files Patch series "kexec: fix the incorrect ifdeffery and dependency of CONFIG_KEXEC". The select of KEXEC for CRASH_DUMP in kernel/Kconfig.kexec will be dropped, then compiling errors will be triggered if below config items are set: === CONFIG_CRASH_CORE=y CONFIG_KEXEC_CORE=y CONFIG_CRASH_DUMP=y === E.g on mips, below link error are seen: -------------------------------------------------------------------- mipsel-linux-ld: kernel/kexec_core.o: in function `kimage_free': kernel/kexec_core.c:(.text+0x2200): undefined reference to `machine_kexec_cleanup' mipsel-linux-ld: kernel/kexec_core.o: in function `__crash_kexec': kernel/kexec_core.c:(.text+0x2480): undefined reference to `machine_crash_shutdown' mipsel-linux-ld: kernel/kexec_core.c:(.text+0x2488): undefined reference to `machine_kexec' mipsel-linux-ld: kernel/kexec_core.o: in function `kernel_kexec': kernel/kexec_core.c:(.text+0x29b8): undefined reference to `machine_shutdown' mipsel-linux-ld: kernel/kexec_core.c:(.text+0x29c0): undefined reference to `machine_kexec' -------------------------------------------------------------------- Here, change the incorrect dependency of building kexec_core related object files, and the ifdeffery on architectures from CONFIG_KEXEC to CONFIG_KEXEC_CORE. Testing: ======== Passed on mips and loognarch with the LKP reproducer. This patch (of 5): Currently, in arch/loongarch/kernel/Makefile, building machine_kexec.o relocate_kernel.o depends on CONFIG_KEXEC. Whereas, since we will drop the select of KEXEC for CRASH_DUMP in kernel/Kconfig.kexec, compiling error will be triggered if below config items are set: === CONFIG_CRASH_CORE=y CONFIG_KEXEC_CORE=y CONFIG_CRASH_DUMP=y === --------------------------------------------------------------- loongarch64-linux-ld: kernel/kexec_core.o: in function `.L209': >> kexec_core.c:(.text+0x1660): undefined reference to `machine_kexec_cleanup' loongarch64-linux-ld: kernel/kexec_core.o: in function `.L287': >> kexec_core.c:(.text+0x1c5c): undefined reference to `machine_crash_shutdown' >> loongarch64-linux-ld: kexec_core.c:(.text+0x1c64): undefined reference to `machine_kexec' loongarch64-linux-ld: kernel/kexec_core.o: in function `.L2^B5': >> kexec_core.c:(.text+0x2090): undefined reference to `machine_shutdown' loongarch64-linux-ld: kexec_core.c:(.text+0x20a0): undefined reference to `machine_kexec' --------------------------------------------------------------- Here, change the dependency of machine_kexec.o relocate_kernel.o to CONFIG_KEXEC_CORE can fix above building error. Link: https://lkml.kernel.org/r/20231208073036.7884-1-bhe@redhat.com Link: https://lkml.kernel.org/r/20231208073036.7884-2-bhe@redhat.com Signed-off-by: Baoquan He Reported-by: kernel test robot Closes: https://lore.kernel.org/oe-kbuild-all/202311300946.kHE9Iu71-lkp@intel.com/ Cc: Eric DeVolder Cc: Ignat Korchagin Cc: Stephen Rothwell Signed-off-by: Andrew Morton --- arch/loongarch/kernel/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/loongarch/kernel/Makefile b/arch/loongarch/kernel/Makefile index 4fcc168f0732..3c808c680370 100644 --- a/arch/loongarch/kernel/Makefile +++ b/arch/loongarch/kernel/Makefile @@ -57,7 +57,7 @@ obj-$(CONFIG_MAGIC_SYSRQ) += sysrq.o obj-$(CONFIG_RELOCATABLE) += relocate.o -obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o +obj-$(CONFIG_KEXEC_CORE) += machine_kexec.o relocate_kernel.o obj-$(CONFIG_CRASH_DUMP) += crash_dump.o obj-$(CONFIG_UNWINDER_GUESS) += unwind_guess.o -- cgit v1.2.3 From 9bad6b75fca1b38b08d94e93f49a90cda44702b9 Mon Sep 17 00:00:00 2001 From: Baoquan He Date: Fri, 8 Dec 2023 15:30:33 +0800 Subject: m68k, kexec: fix the incorrect ifdeffery and build dependency of CONFIG_KEXEC The select of KEXEC for CRASH_DUMP in kernel/Kconfig.kexec will be dropped, then compiling errors will be triggered if below config items are set: === CONFIG_CRASH_CORE=y CONFIG_KEXEC_CORE=y CONFIG_CRASH_DUMP=y === Here, change the dependency of buinding machine_kexec.o relocate_kernel.o and the ifdeffery in asm/kexe.h to CONFIG_KEXEC_CORE. Link: https://lkml.kernel.org/r/20231208073036.7884-3-bhe@redhat.com Signed-off-by: Baoquan He Cc: Eric DeVolder Cc: Ignat Korchagin Cc: kernel test robot Cc: Stephen Rothwell Signed-off-by: Andrew Morton --- arch/m68k/include/asm/kexec.h | 4 ++-- arch/m68k/kernel/Makefile | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/m68k/include/asm/kexec.h b/arch/m68k/include/asm/kexec.h index f5a8b2defa4b..3b0b64f0a353 100644 --- a/arch/m68k/include/asm/kexec.h +++ b/arch/m68k/include/asm/kexec.h @@ -2,7 +2,7 @@ #ifndef _ASM_M68K_KEXEC_H #define _ASM_M68K_KEXEC_H -#ifdef CONFIG_KEXEC +#ifdef CONFIG_KEXEC_CORE /* Maximum physical address we can use pages from */ #define KEXEC_SOURCE_MEMORY_LIMIT (-1UL) @@ -25,6 +25,6 @@ static inline void crash_setup_regs(struct pt_regs *newregs, #endif /* __ASSEMBLY__ */ -#endif /* CONFIG_KEXEC */ +#endif /* CONFIG_KEXEC_CORE */ #endif /* _ASM_M68K_KEXEC_H */ diff --git a/arch/m68k/kernel/Makefile b/arch/m68k/kernel/Makefile index 01fb69a5095f..f335bf3268a1 100644 --- a/arch/m68k/kernel/Makefile +++ b/arch/m68k/kernel/Makefile @@ -25,7 +25,7 @@ obj-$(CONFIG_PCI) += pcibios.o obj-$(CONFIG_M68K_NONCOHERENT_DMA) += dma.o -obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o +obj-$(CONFIG_KEXEC_CORE) += machine_kexec.o relocate_kernel.o obj-$(CONFIG_BOOTINFO_PROC) += bootinfo_proc.o obj-$(CONFIG_UBOOT) += uboot.o -- cgit v1.2.3 From 8cd2accb71f5eb8e92d775fc1978d3779875c2e5 Mon Sep 17 00:00:00 2001 From: Baoquan He Date: Fri, 8 Dec 2023 15:30:34 +0800 Subject: mips, kexec: fix the incorrect ifdeffery and dependency of CONFIG_KEXEC The select of KEXEC for CRASH_DUMP in kernel/Kconfig.kexec will be dropped, then compiling errors will be triggered if below config items are set: === CONFIG_CRASH_CORE=y CONFIG_KEXEC_CORE=y CONFIG_CRASH_DUMP=y === -------------------------------------------------------------------- mipsel-linux-ld: kernel/kexec_core.o: in function `kimage_free': kernel/kexec_core.c:(.text+0x2200): undefined reference to `machine_kexec_cleanup' mipsel-linux-ld: kernel/kexec_core.o: in function `__crash_kexec': kernel/kexec_core.c:(.text+0x2480): undefined reference to `machine_crash_shutdown' mipsel-linux-ld: kernel/kexec_core.c:(.text+0x2488): undefined reference to `machine_kexec' mipsel-linux-ld: kernel/kexec_core.o: in function `kernel_kexec': kernel/kexec_core.c:(.text+0x29b8): undefined reference to `machine_shutdown' mipsel-linux-ld: kernel/kexec_core.c:(.text+0x29c0): undefined reference to `machine_kexec' -------------------------------------------------------------------- Here, change the dependency of building kexec_core related object files, and the ifdeffery in mips from CONFIG_KEXEC to CONFIG_KEXEC_CORE. Link: https://lkml.kernel.org/r/20231208073036.7884-4-bhe@redhat.com Signed-off-by: Baoquan He Reported-by: kernel test robot Closes: https://lore.kernel.org/oe-kbuild-all/202311302042.sn8cDPIX-lkp@intel.com/ Cc: Eric DeVolder Cc: Ignat Korchagin Cc: Stephen Rothwell Signed-off-by: Andrew Morton --- arch/mips/cavium-octeon/smp.c | 4 ++-- arch/mips/include/asm/kexec.h | 2 +- arch/mips/include/asm/smp-ops.h | 2 +- arch/mips/include/asm/smp.h | 2 +- arch/mips/kernel/Makefile | 2 +- arch/mips/kernel/smp-bmips.c | 4 ++-- arch/mips/kernel/smp-cps.c | 10 +++++----- arch/mips/loongson64/reset.c | 4 ++-- arch/mips/loongson64/smp.c | 2 +- 9 files changed, 16 insertions(+), 16 deletions(-) diff --git a/arch/mips/cavium-octeon/smp.c b/arch/mips/cavium-octeon/smp.c index 33c09688210f..08ea2cde1eb5 100644 --- a/arch/mips/cavium-octeon/smp.c +++ b/arch/mips/cavium-octeon/smp.c @@ -422,7 +422,7 @@ static const struct plat_smp_ops octeon_smp_ops = { .cpu_disable = octeon_cpu_disable, .cpu_die = octeon_cpu_die, #endif -#ifdef CONFIG_KEXEC +#ifdef CONFIG_KEXEC_CORE .kexec_nonboot_cpu = kexec_nonboot_cpu_jump, #endif }; @@ -502,7 +502,7 @@ static const struct plat_smp_ops octeon_78xx_smp_ops = { .cpu_disable = octeon_cpu_disable, .cpu_die = octeon_cpu_die, #endif -#ifdef CONFIG_KEXEC +#ifdef CONFIG_KEXEC_CORE .kexec_nonboot_cpu = kexec_nonboot_cpu_jump, #endif }; diff --git a/arch/mips/include/asm/kexec.h b/arch/mips/include/asm/kexec.h index d6d5fa5cc31d..69e579e41e66 100644 --- a/arch/mips/include/asm/kexec.h +++ b/arch/mips/include/asm/kexec.h @@ -31,7 +31,7 @@ static inline void crash_setup_regs(struct pt_regs *newregs, prepare_frametrace(newregs); } -#ifdef CONFIG_KEXEC +#ifdef CONFIG_KEXEC_CORE struct kimage; extern unsigned long kexec_args[4]; extern int (*_machine_kexec_prepare)(struct kimage *); diff --git a/arch/mips/include/asm/smp-ops.h b/arch/mips/include/asm/smp-ops.h index 5719ff49eff1..0c59e168f800 100644 --- a/arch/mips/include/asm/smp-ops.h +++ b/arch/mips/include/asm/smp-ops.h @@ -35,7 +35,7 @@ struct plat_smp_ops { void (*cpu_die)(unsigned int cpu); void (*cleanup_dead_cpu)(unsigned cpu); #endif -#ifdef CONFIG_KEXEC +#ifdef CONFIG_KEXEC_CORE void (*kexec_nonboot_cpu)(void); #endif }; diff --git a/arch/mips/include/asm/smp.h b/arch/mips/include/asm/smp.h index a40d8c0e4b87..901bc61fa7ae 100644 --- a/arch/mips/include/asm/smp.h +++ b/arch/mips/include/asm/smp.h @@ -93,7 +93,7 @@ static inline void __cpu_die(unsigned int cpu) extern void __noreturn play_dead(void); #endif -#ifdef CONFIG_KEXEC +#ifdef CONFIG_KEXEC_CORE static inline void kexec_nonboot_cpu(void) { extern const struct plat_smp_ops *mp_ops; /* private */ diff --git a/arch/mips/kernel/Makefile b/arch/mips/kernel/Makefile index 853a43ee4b44..ecf3278a32f7 100644 --- a/arch/mips/kernel/Makefile +++ b/arch/mips/kernel/Makefile @@ -90,7 +90,7 @@ obj-$(CONFIG_GPIO_TXX9) += gpio_txx9.o obj-$(CONFIG_RELOCATABLE) += relocate.o -obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o crash.o +obj-$(CONFIG_KEXEC_CORE) += machine_kexec.o relocate_kernel.o crash.o obj-$(CONFIG_CRASH_DUMP) += crash_dump.o obj-$(CONFIG_EARLY_PRINTK) += early_printk.o obj-$(CONFIG_EARLY_PRINTK_8250) += early_printk_8250.o diff --git a/arch/mips/kernel/smp-bmips.c b/arch/mips/kernel/smp-bmips.c index c074ecce3fbf..b3dbf9ecb0d6 100644 --- a/arch/mips/kernel/smp-bmips.c +++ b/arch/mips/kernel/smp-bmips.c @@ -434,7 +434,7 @@ const struct plat_smp_ops bmips43xx_smp_ops = { .cpu_disable = bmips_cpu_disable, .cpu_die = bmips_cpu_die, #endif -#ifdef CONFIG_KEXEC +#ifdef CONFIG_KEXEC_CORE .kexec_nonboot_cpu = kexec_nonboot_cpu_jump, #endif }; @@ -451,7 +451,7 @@ const struct plat_smp_ops bmips5000_smp_ops = { .cpu_disable = bmips_cpu_disable, .cpu_die = bmips_cpu_die, #endif -#ifdef CONFIG_KEXEC +#ifdef CONFIG_KEXEC_CORE .kexec_nonboot_cpu = kexec_nonboot_cpu_jump, #endif }; diff --git a/arch/mips/kernel/smp-cps.c b/arch/mips/kernel/smp-cps.c index dd55d59b88db..f6c37d407f36 100644 --- a/arch/mips/kernel/smp-cps.c +++ b/arch/mips/kernel/smp-cps.c @@ -392,7 +392,7 @@ static void cps_smp_finish(void) local_irq_enable(); } -#if defined(CONFIG_HOTPLUG_CPU) || defined(CONFIG_KEXEC) +#if defined(CONFIG_HOTPLUG_CPU) || defined(CONFIG_KEXEC_CORE) enum cpu_death { CPU_DEATH_HALT, @@ -429,7 +429,7 @@ static void cps_shutdown_this_cpu(enum cpu_death death) } } -#ifdef CONFIG_KEXEC +#ifdef CONFIG_KEXEC_CORE static void cps_kexec_nonboot_cpu(void) { @@ -439,9 +439,9 @@ static void cps_kexec_nonboot_cpu(void) cps_shutdown_this_cpu(CPU_DEATH_POWER); } -#endif /* CONFIG_KEXEC */ +#endif /* CONFIG_KEXEC_CORE */ -#endif /* CONFIG_HOTPLUG_CPU || CONFIG_KEXEC */ +#endif /* CONFIG_HOTPLUG_CPU || CONFIG_KEXEC_CORE */ #ifdef CONFIG_HOTPLUG_CPU @@ -610,7 +610,7 @@ static const struct plat_smp_ops cps_smp_ops = { .cpu_die = cps_cpu_die, .cleanup_dead_cpu = cps_cleanup_dead_cpu, #endif -#ifdef CONFIG_KEXEC +#ifdef CONFIG_KEXEC_CORE .kexec_nonboot_cpu = cps_kexec_nonboot_cpu, #endif }; diff --git a/arch/mips/loongson64/reset.c b/arch/mips/loongson64/reset.c index e420800043b0..e01c8d4a805a 100644 --- a/arch/mips/loongson64/reset.c +++ b/arch/mips/loongson64/reset.c @@ -53,7 +53,7 @@ static void loongson_halt(void) } } -#ifdef CONFIG_KEXEC +#ifdef CONFIG_KEXEC_CORE /* 0X80000000~0X80200000 is safe */ #define MAX_ARGS 64 @@ -158,7 +158,7 @@ static int __init mips_reboot_setup(void) _machine_halt = loongson_halt; pm_power_off = loongson_poweroff; -#ifdef CONFIG_KEXEC +#ifdef CONFIG_KEXEC_CORE kexec_argv = kmalloc(KEXEC_ARGV_SIZE, GFP_KERNEL); if (WARN_ON(!kexec_argv)) return -ENOMEM; diff --git a/arch/mips/loongson64/smp.c b/arch/mips/loongson64/smp.c index e015a26a40f7..498bdc1bb0ed 100644 --- a/arch/mips/loongson64/smp.c +++ b/arch/mips/loongson64/smp.c @@ -864,7 +864,7 @@ const struct plat_smp_ops loongson3_smp_ops = { .cpu_disable = loongson3_cpu_disable, .cpu_die = loongson3_cpu_die, #endif -#ifdef CONFIG_KEXEC +#ifdef CONFIG_KEXEC_CORE .kexec_nonboot_cpu = kexec_nonboot_cpu_jump, #endif }; -- cgit v1.2.3 From d70c27b728b8da1ab9c3b7ca117ee1c99dc86d29 Mon Sep 17 00:00:00 2001 From: Baoquan He Date: Fri, 8 Dec 2023 15:30:35 +0800 Subject: sh, kexec: fix the incorrect ifdeffery and dependency of CONFIG_KEXEC The select of KEXEC for CRASH_DUMP in kernel/Kconfig.kexec will be dropped, then compiling errors will be triggered if below config items are set: === CONFIG_CRASH_CORE=y CONFIG_KEXEC_CORE=y CONFIG_CRASH_DUMP=y === Here, change the dependency of building kexec_core related object files, and the ifdeffery on SuperH from CONFIG_KEXEC to CONFIG_KEXEC_CORE. Link: https://lkml.kernel.org/r/20231208073036.7884-5-bhe@redhat.com Signed-off-by: Baoquan He Cc: Eric DeVolder Cc: Ignat Korchagin Cc: kernel test robot Cc: Stephen Rothwell Signed-off-by: Andrew Morton --- arch/sh/include/asm/kexec.h | 4 ++-- arch/sh/kernel/Makefile | 2 +- arch/sh/kernel/reboot.c | 4 ++-- arch/sh/kernel/setup.c | 2 +- 4 files changed, 6 insertions(+), 6 deletions(-) diff --git a/arch/sh/include/asm/kexec.h b/arch/sh/include/asm/kexec.h index 927d80ba2332..76631714673c 100644 --- a/arch/sh/include/asm/kexec.h +++ b/arch/sh/include/asm/kexec.h @@ -28,7 +28,7 @@ /* The native architecture */ #define KEXEC_ARCH KEXEC_ARCH_SH -#ifdef CONFIG_KEXEC +#ifdef CONFIG_KEXEC_CORE /* arch/sh/kernel/machine_kexec.c */ void reserve_crashkernel(void); @@ -67,6 +67,6 @@ static inline void crash_setup_regs(struct pt_regs *newregs, } #else static inline void reserve_crashkernel(void) { } -#endif /* CONFIG_KEXEC */ +#endif /* CONFIG_KEXEC_CORE */ #endif /* __ASM_SH_KEXEC_H */ diff --git a/arch/sh/kernel/Makefile b/arch/sh/kernel/Makefile index 69cd9ac4b2ab..2d7e70537de0 100644 --- a/arch/sh/kernel/Makefile +++ b/arch/sh/kernel/Makefile @@ -33,7 +33,7 @@ obj-$(CONFIG_SMP) += smp.o obj-$(CONFIG_SH_STANDARD_BIOS) += sh_bios.o obj-$(CONFIG_KGDB) += kgdb.o obj-$(CONFIG_MODULES) += sh_ksyms_32.o module.o -obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o +obj-$(CONFIG_KEXEC_CORE) += machine_kexec.o relocate_kernel.o obj-$(CONFIG_CRASH_DUMP) += crash_dump.o obj-$(CONFIG_STACKTRACE) += stacktrace.o obj-$(CONFIG_IO_TRAPPED) += io_trapped.o diff --git a/arch/sh/kernel/reboot.c b/arch/sh/kernel/reboot.c index e8eeedc9b182..1de006b1c339 100644 --- a/arch/sh/kernel/reboot.c +++ b/arch/sh/kernel/reboot.c @@ -63,7 +63,7 @@ struct machine_ops machine_ops = { .shutdown = native_machine_shutdown, .restart = native_machine_restart, .halt = native_machine_halt, -#ifdef CONFIG_KEXEC +#ifdef CONFIG_KEXEC_CORE .crash_shutdown = native_machine_crash_shutdown, #endif }; @@ -88,7 +88,7 @@ void machine_halt(void) machine_ops.halt(); } -#ifdef CONFIG_KEXEC +#ifdef CONFIG_KEXEC_CORE void machine_crash_shutdown(struct pt_regs *regs) { machine_ops.crash_shutdown(regs); diff --git a/arch/sh/kernel/setup.c b/arch/sh/kernel/setup.c index 3d80515298d2..d3175f09b3aa 100644 --- a/arch/sh/kernel/setup.c +++ b/arch/sh/kernel/setup.c @@ -220,7 +220,7 @@ void __init __add_active_range(unsigned int nid, unsigned long start_pfn, request_resource(res, &code_resource); request_resource(res, &data_resource); request_resource(res, &bss_resource); -#ifdef CONFIG_KEXEC +#ifdef CONFIG_KEXEC_CORE request_resource(res, &crashk_res); #endif -- cgit v1.2.3 From 69f8ca8d36b5e52360f45c3b63bcb3d075da36df Mon Sep 17 00:00:00 2001 From: Baoquan He Date: Fri, 8 Dec 2023 15:30:36 +0800 Subject: x86, kexec: fix the wrong ifdeffery CONFIG_KEXEC With the current ifdeffery CONFIG_KEXEC, get_cmdline_acpi_rsdp() is only available when kexec_load interface is taken, while kexec_file_load interface can't make use of it. Now change it to CONFIG_KEXEC_CORE. Link: https://lkml.kernel.org/r/20231208073036.7884-6-bhe@redhat.com Signed-off-by: Baoquan He Cc: Eric DeVolder Cc: Ignat Korchagin Cc: kernel test robot Cc: Stephen Rothwell Signed-off-by: Andrew Morton --- arch/x86/boot/compressed/acpi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/boot/compressed/acpi.c b/arch/x86/boot/compressed/acpi.c index 55c98fdd67d2..18d15d1ce87d 100644 --- a/arch/x86/boot/compressed/acpi.c +++ b/arch/x86/boot/compressed/acpi.c @@ -178,7 +178,7 @@ static unsigned long get_cmdline_acpi_rsdp(void) { unsigned long addr = 0; -#ifdef CONFIG_KEXEC +#ifdef CONFIG_KEXEC_CORE char val[MAX_ADDR_LEN] = { }; int ret; -- cgit v1.2.3 From 1dd11e977360ad3493812da0b05ffd9adcdd15a1 Mon Sep 17 00:00:00 2001 From: Yuntao Wang Date: Sat, 9 Dec 2023 22:14:38 +0800 Subject: crash_core: fix the check for whether crashkernel is from high memory If crash_base is equal to CRASH_ADDR_LOW_MAX, it also indicates that the crashkernel memory is allocated from high memory. However, the current check only considers the case where crash_base is greater than CRASH_ADDR_LOW_MAX. Fix it. The runtime effects is that crashkernel high memory is successfully reserved, whereas the crashkernel low memory is bypassed in this case, then kdump kernel bootup will fail because of no low memory under 4G. This patch also includes some minor cleanups. Link: https://lkml.kernel.org/r/20231209141438.77233-1-ytcoode@gmail.com Fixes: 0ab97169aa05 ("crash_core: add generic function to do reservation") Signed-off-by: Yuntao Wang Cc: Baoquan He Cc: Dave Young Cc: Vivek Goyal Cc: Zhen Lei Cc: "Eric W. Biederman" Signed-off-by: Andrew Morton --- kernel/crash_core.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/kernel/crash_core.c b/kernel/crash_core.c index efe87d501c8c..d4313b53837e 100644 --- a/kernel/crash_core.c +++ b/kernel/crash_core.c @@ -199,7 +199,7 @@ static __initdata char *suffix_tbl[] = { * It returns 0 on success and -EINVAL on failure. */ static int __init parse_crashkernel_suffix(char *cmdline, - unsigned long long *crash_size, + unsigned long long *crash_size, const char *suffix) { char *cur = cmdline; @@ -268,9 +268,9 @@ static int __init __parse_crashkernel(char *cmdline, unsigned long long *crash_base, const char *suffix) { - char *first_colon, *first_space; - char *ck_cmdline; - char *name = "crashkernel="; + char *first_colon, *first_space; + char *ck_cmdline; + char *name = "crashkernel="; BUG_ON(!crash_size || !crash_base); *crash_size = 0; @@ -440,7 +440,7 @@ retry: return; } - if ((crash_base > CRASH_ADDR_LOW_MAX) && + if ((crash_base >= CRASH_ADDR_LOW_MAX) && crash_low_size && reserve_crashkernel_low(crash_low_size)) { memblock_phys_free(crash_base, crash_size); return; -- cgit v1.2.3 From 43e8832fed08438e2a27afed9bac21acd0ceffe5 Mon Sep 17 00:00:00 2001 From: John Hubbard Date: Fri, 8 Dec 2023 18:01:44 -0800 Subject: Revert "selftests: error out if kernel header files are not yet built" This reverts commit 9fc96c7c19df ("selftests: error out if kernel header files are not yet built"). It turns out that requiring the kernel headers to be built as a prerequisite to building selftests, does not work in many cases. For example, Peter Zijlstra writes: "My biggest beef with the whole thing is that I simply do not want to use 'make headers', it doesn't work for me. I have a ton of output directories and I don't care to build tools into the output dirs, in fact some of them flat out refuse to work that way (bpf comes to mind)." [1] Therefore, stop erroring out on the selftests build. Additional patches will be required in order to change over to not requiring the kernel headers. [1] https://lore.kernel.org/20231208221007.GO28727@noisy.programming.kicks-ass.net Link: https://lkml.kernel.org/r/20231209020144.244759-1-jhubbard@nvidia.com Fixes: 9fc96c7c19df ("selftests: error out if kernel header files are not yet built") Signed-off-by: John Hubbard Cc: Anders Roxell Cc: Muhammad Usama Anjum Cc: David Hildenbrand Cc: Peter Xu Cc: Jonathan Corbet Cc: Nathan Chancellor Cc: Shuah Khan Cc: Peter Zijlstra Cc: Marcos Paulo de Souza Cc: Signed-off-by: Andrew Morton --- tools/testing/selftests/Makefile | 21 +-------------------- tools/testing/selftests/lib.mk | 40 +++------------------------------------- 2 files changed, 4 insertions(+), 57 deletions(-) diff --git a/tools/testing/selftests/Makefile b/tools/testing/selftests/Makefile index 3b2061d1c1a5..8247a7c69c36 100644 --- a/tools/testing/selftests/Makefile +++ b/tools/testing/selftests/Makefile @@ -155,12 +155,10 @@ ifneq ($(KBUILD_OUTPUT),) abs_objtree := $(realpath $(abs_objtree)) BUILD := $(abs_objtree)/kselftest KHDR_INCLUDES := -isystem ${abs_objtree}/usr/include - KHDR_DIR := ${abs_objtree}/usr/include else BUILD := $(CURDIR) abs_srctree := $(shell cd $(top_srcdir) && pwd) KHDR_INCLUDES := -isystem ${abs_srctree}/usr/include - KHDR_DIR := ${abs_srctree}/usr/include DEFAULT_INSTALL_HDR_PATH := 1 endif @@ -174,7 +172,7 @@ export KHDR_INCLUDES # all isn't the first target in the file. .DEFAULT_GOAL := all -all: kernel_header_files +all: @ret=1; \ for TARGET in $(TARGETS); do \ BUILD_TARGET=$$BUILD/$$TARGET; \ @@ -185,23 +183,6 @@ all: kernel_header_files ret=$$((ret * $$?)); \ done; exit $$ret; -kernel_header_files: - @ls $(KHDR_DIR)/linux/*.h >/dev/null 2>/dev/null; \ - if [ $$? -ne 0 ]; then \ - RED='\033[1;31m'; \ - NOCOLOR='\033[0m'; \ - echo; \ - echo -e "$${RED}error$${NOCOLOR}: missing kernel header files."; \ - echo "Please run this and try again:"; \ - echo; \ - echo " cd $(top_srcdir)"; \ - echo " make headers"; \ - echo; \ - exit 1; \ - fi - -.PHONY: kernel_header_files - run_tests: all @for TARGET in $(TARGETS); do \ BUILD_TARGET=$$BUILD/$$TARGET; \ diff --git a/tools/testing/selftests/lib.mk b/tools/testing/selftests/lib.mk index 118e0964bda9..aa646e0661f3 100644 --- a/tools/testing/selftests/lib.mk +++ b/tools/testing/selftests/lib.mk @@ -44,26 +44,10 @@ endif selfdir = $(realpath $(dir $(filter %/lib.mk,$(MAKEFILE_LIST)))) top_srcdir = $(selfdir)/../../.. -ifeq ("$(origin O)", "command line") - KBUILD_OUTPUT := $(O) +ifeq ($(KHDR_INCLUDES),) +KHDR_INCLUDES := -isystem $(top_srcdir)/usr/include endif -ifneq ($(KBUILD_OUTPUT),) - # Make's built-in functions such as $(abspath ...), $(realpath ...) cannot - # expand a shell special character '~'. We use a somewhat tedious way here. - abs_objtree := $(shell cd $(top_srcdir) && mkdir -p $(KBUILD_OUTPUT) && cd $(KBUILD_OUTPUT) && pwd) - $(if $(abs_objtree),, \ - $(error failed to create output directory "$(KBUILD_OUTPUT)")) - # $(realpath ...) resolves symlinks - abs_objtree := $(realpath $(abs_objtree)) - KHDR_DIR := ${abs_objtree}/usr/include -else - abs_srctree := $(shell cd $(top_srcdir) && pwd) - KHDR_DIR := ${abs_srctree}/usr/include -endif - -KHDR_INCLUDES := -isystem $(KHDR_DIR) - # The following are built by lib.mk common compile rules. # TEST_CUSTOM_PROGS should be used by tests that require # custom build rule and prevent common build rule use. @@ -74,25 +58,7 @@ TEST_GEN_PROGS := $(patsubst %,$(OUTPUT)/%,$(TEST_GEN_PROGS)) TEST_GEN_PROGS_EXTENDED := $(patsubst %,$(OUTPUT)/%,$(TEST_GEN_PROGS_EXTENDED)) TEST_GEN_FILES := $(patsubst %,$(OUTPUT)/%,$(TEST_GEN_FILES)) -all: kernel_header_files $(TEST_GEN_PROGS) $(TEST_GEN_PROGS_EXTENDED) \ - $(TEST_GEN_FILES) - -kernel_header_files: - @ls $(KHDR_DIR)/linux/*.h >/dev/null 2>/dev/null; \ - if [ $$? -ne 0 ]; then \ - RED='\033[1;31m'; \ - NOCOLOR='\033[0m'; \ - echo; \ - echo -e "$${RED}error$${NOCOLOR}: missing kernel header files."; \ - echo "Please run this and try again:"; \ - echo; \ - echo " cd $(top_srcdir)"; \ - echo " make headers"; \ - echo; \ - exit 1; \ - fi - -.PHONY: kernel_header_files +all: $(TEST_GEN_PROGS) $(TEST_GEN_PROGS_EXTENDED) $(TEST_GEN_FILES) define RUN_TESTS BASE_DIR="$(selfdir)"; \ -- cgit v1.2.3 From 55ac8bbe358bdd2f3c044c12f249fd22d48fe015 Mon Sep 17 00:00:00 2001 From: David Stevens Date: Tue, 18 Apr 2023 17:40:31 +0900 Subject: mm/shmem: fix race in shmem_undo_range w/THP Split folios during the second loop of shmem_undo_range. It's not sufficient to only split folios when dealing with partial pages, since it's possible for a THP to be faulted in after that point. Calling truncate_inode_folio in that situation can result in throwing away data outside of the range being targeted. [akpm@linux-foundation.org: tidy up comment layout] Link: https://lkml.kernel.org/r/20230418084031.3439795-1-stevensd@google.com Fixes: b9a8a4195c7d ("truncate,shmem: Handle truncates that split large folios") Signed-off-by: David Stevens Cc: Matthew Wilcox (Oracle) Cc: Suleiman Souhlal Cc: Signed-off-by: Andrew Morton --- mm/shmem.c | 19 ++++++++++++++++++- 1 file changed, 18 insertions(+), 1 deletion(-) diff --git a/mm/shmem.c b/mm/shmem.c index 91e2620148b2..0d1ce70bce38 100644 --- a/mm/shmem.c +++ b/mm/shmem.c @@ -1080,7 +1080,24 @@ whole_folios: } VM_BUG_ON_FOLIO(folio_test_writeback(folio), folio); - truncate_inode_folio(mapping, folio); + + if (!folio_test_large(folio)) { + truncate_inode_folio(mapping, folio); + } else if (truncate_inode_partial_folio(folio, lstart, lend)) { + /* + * If we split a page, reset the loop so + * that we pick up the new sub pages. + * Otherwise the THP was entirely + * dropped or the target range was + * zeroed, so just continue the loop as + * is. + */ + if (!folio_test_large(folio)) { + folio_unlock(folio); + index = start; + break; + } + } } folio_unlock(folio); } -- cgit v1.2.3 From 081488051d28d32569ebb7c7a23572778b2e7d57 Mon Sep 17 00:00:00 2001 From: Yu Zhao Date: Thu, 7 Dec 2023 23:14:04 -0700 Subject: mm/mglru: fix underprotected page cache Unmapped folios accessed through file descriptors can be underprotected. Those folios are added to the oldest generation based on: 1. The fact that they are less costly to reclaim (no need to walk the rmap and flush the TLB) and have less impact on performance (don't cause major PFs and can be non-blocking if needed again). 2. The observation that they are likely to be single-use. E.g., for client use cases like Android, its apps parse configuration files and store the data in heap (anon); for server use cases like MySQL, it reads from InnoDB files and holds the cached data for tables in buffer pools (anon). However, the oldest generation can be very short lived, and if so, it doesn't provide the PID controller with enough time to respond to a surge of refaults. (Note that the PID controller uses weighted refaults and those from evicted generations only take a half of the whole weight.) In other words, for a short lived generation, the moving average smooths out the spike quickly. To fix the problem: 1. For folios that are already on LRU, if they can be beyond the tracking range of tiers, i.e., five accesses through file descriptors, move them to the second oldest generation to give them more time to age. (Note that tiers are used by the PID controller to statistically determine whether folios accessed multiple times through file descriptors are worth protecting.) 2. When adding unmapped folios to LRU, adjust the placement of them so that they are not too close to the tail. The effect of this is similar to the above. On Android, launching 55 apps sequentially: Before After Change workingset_refault_anon 25641024 25598972 0% workingset_refault_file 115016834 106178438 -8% Link: https://lkml.kernel.org/r/20231208061407.2125867-1-yuzhao@google.com Fixes: ac35a4902374 ("mm: multi-gen LRU: minimal implementation") Signed-off-by: Yu Zhao Reported-by: Charan Teja Kalla Tested-by: Kalesh Singh Cc: T.J. Mercier Cc: Kairui Song Cc: Hillf Danton Cc: Jaroslav Pulchart Cc: Signed-off-by: Andrew Morton --- include/linux/mm_inline.h | 23 ++++++++++++++--------- mm/vmscan.c | 2 +- mm/workingset.c | 6 +++--- 3 files changed, 18 insertions(+), 13 deletions(-) diff --git a/include/linux/mm_inline.h b/include/linux/mm_inline.h index 9ae7def16cb2..f4fe593c1400 100644 --- a/include/linux/mm_inline.h +++ b/include/linux/mm_inline.h @@ -232,22 +232,27 @@ static inline bool lru_gen_add_folio(struct lruvec *lruvec, struct folio *folio, if (folio_test_unevictable(folio) || !lrugen->enabled) return false; /* - * There are three common cases for this page: - * 1. If it's hot, e.g., freshly faulted in or previously hot and - * migrated, add it to the youngest generation. - * 2. If it's cold but can't be evicted immediately, i.e., an anon page - * not in swapcache or a dirty page pending writeback, add it to the - * second oldest generation. - * 3. Everything else (clean, cold) is added to the oldest generation. + * There are four common cases for this page: + * 1. If it's hot, i.e., freshly faulted in, add it to the youngest + * generation, and it's protected over the rest below. + * 2. If it can't be evicted immediately, i.e., a dirty page pending + * writeback, add it to the second youngest generation. + * 3. If it should be evicted first, e.g., cold and clean from + * folio_rotate_reclaimable(), add it to the oldest generation. + * 4. Everything else falls between 2 & 3 above and is added to the + * second oldest generation if it's considered inactive, or the + * oldest generation otherwise. See lru_gen_is_active(). */ if (folio_test_active(folio)) seq = lrugen->max_seq; else if ((type == LRU_GEN_ANON && !folio_test_swapcache(folio)) || (folio_test_reclaim(folio) && (folio_test_dirty(folio) || folio_test_writeback(folio)))) - seq = lrugen->min_seq[type] + 1; - else + seq = lrugen->max_seq - 1; + else if (reclaiming || lrugen->min_seq[type] + MIN_NR_GENS >= lrugen->max_seq) seq = lrugen->min_seq[type]; + else + seq = lrugen->min_seq[type] + 1; gen = lru_gen_from_seq(seq); flags = (gen + 1UL) << LRU_GEN_PGOFF; diff --git a/mm/vmscan.c b/mm/vmscan.c index 506f8220c5fe..540333f5415c 100644 --- a/mm/vmscan.c +++ b/mm/vmscan.c @@ -4232,7 +4232,7 @@ static bool sort_folio(struct lruvec *lruvec, struct folio *folio, struct scan_c } /* protected */ - if (tier > tier_idx) { + if (tier > tier_idx || refs == BIT(LRU_REFS_WIDTH)) { int hist = lru_hist_from_seq(lrugen->min_seq[type]); gen = folio_inc_gen(lruvec, folio, false); diff --git a/mm/workingset.c b/mm/workingset.c index b192e44a0e7c..33baad203277 100644 --- a/mm/workingset.c +++ b/mm/workingset.c @@ -313,10 +313,10 @@ static void lru_gen_refault(struct folio *folio, void *shadow) * 1. For pages accessed through page tables, hotter pages pushed out * hot pages which refaulted immediately. * 2. For pages accessed multiple times through file descriptors, - * numbers of accesses might have been out of the range. + * they would have been protected by sort_folio(). */ - if (lru_gen_in_fault() || refs == BIT(LRU_REFS_WIDTH)) { - folio_set_workingset(folio); + if (lru_gen_in_fault() || refs >= BIT(LRU_REFS_WIDTH) - 1) { + set_mask_bits(&folio->flags, 0, LRU_REFS_MASK | BIT(PG_workingset)); mod_lruvec_state(lruvec, WORKINGSET_RESTORE_BASE + type, delta); } unlock: -- cgit v1.2.3 From 5095a2b23987d3c3c47dd16b3d4080e2733b8bb9 Mon Sep 17 00:00:00 2001 From: Yu Zhao Date: Thu, 7 Dec 2023 23:14:05 -0700 Subject: mm/mglru: try to stop at high watermarks The initial MGLRU patchset didn't include the memcg LRU support, and it relied on should_abort_scan(), added by commit f76c83378851 ("mm: multi-gen LRU: optimize multiple memcgs"), to "backoff to avoid overshooting their aggregate reclaim target by too much". Later on when the memcg LRU was added, should_abort_scan() was deemed unnecessary, and the test results [1] showed no side effects after it was removed by commit a579086c99ed ("mm: multi-gen LRU: remove eviction fairness safeguard"). However, that test used memory.reclaim, which sets nr_to_reclaim to SWAP_CLUSTER_MAX. So it can overshoot only by SWAP_CLUSTER_MAX-1 pages, i.e., from nr_reclaimed=nr_to_reclaim-1 to nr_reclaimed=nr_to_reclaim+SWAP_CLUSTER_MAX-1. Compared with the batch size kswapd sets to nr_to_reclaim, SWAP_CLUSTER_MAX is tiny. Therefore that test isn't able to reproduce the worst case scenario, i.e., kswapd overshooting GBs on large systems and "consuming 100% CPU" (see the Closes tag). Bring back a simplified version of should_abort_scan() on top of the memcg LRU, so that kswapd stops when all eligible zones are above their respective high watermarks plus a small delta to lower the chance of KSWAPD_HIGH_WMARK_HIT_QUICKLY. Note that this only applies to order-0 reclaim, meaning compaction-induced reclaim can still run wild (which is a different problem). On Android, launching 55 apps sequentially: Before After Change pgpgin 838377172 802955040 -4% pgpgout 38037080 34336300 -10% [1] https://lore.kernel.org/20221222041905.2431096-1-yuzhao@google.com/ Link: https://lkml.kernel.org/r/20231208061407.2125867-2-yuzhao@google.com Fixes: a579086c99ed ("mm: multi-gen LRU: remove eviction fairness safeguard") Signed-off-by: Yu Zhao Reported-by: Charan Teja Kalla Reported-by: Jaroslav Pulchart Closes: https://lore.kernel.org/CAK8fFZ4DY+GtBA40Pm7Nn5xCHy+51w3sfxPqkqpqakSXYyX+Wg@mail.gmail.com/ Tested-by: Jaroslav Pulchart Tested-by: Kalesh Singh Cc: Hillf Danton Cc: Kairui Song Cc: T.J. Mercier Cc: Signed-off-by: Andrew Morton --- mm/vmscan.c | 36 ++++++++++++++++++++++++++++-------- 1 file changed, 28 insertions(+), 8 deletions(-) diff --git a/mm/vmscan.c b/mm/vmscan.c index 540333f5415c..bb7dacd8f753 100644 --- a/mm/vmscan.c +++ b/mm/vmscan.c @@ -4648,20 +4648,41 @@ static long get_nr_to_scan(struct lruvec *lruvec, struct scan_control *sc, bool return try_to_inc_max_seq(lruvec, max_seq, sc, can_swap, false) ? -1 : 0; } -static unsigned long get_nr_to_reclaim(struct scan_control *sc) +static bool should_abort_scan(struct lruvec *lruvec, struct scan_control *sc) { + int i; + enum zone_watermarks mark; + /* don't abort memcg reclaim to ensure fairness */ if (!root_reclaim(sc)) - return -1; + return false; + + if (sc->nr_reclaimed >= max(sc->nr_to_reclaim, compact_gap(sc->order))) + return true; + + /* check the order to exclude compaction-induced reclaim */ + if (!current_is_kswapd() || sc->order) + return false; - return max(sc->nr_to_reclaim, compact_gap(sc->order)); + mark = sysctl_numa_balancing_mode & NUMA_BALANCING_MEMORY_TIERING ? + WMARK_PROMO : WMARK_HIGH; + + for (i = 0; i <= sc->reclaim_idx; i++) { + struct zone *zone = lruvec_pgdat(lruvec)->node_zones + i; + unsigned long size = wmark_pages(zone, mark) + MIN_LRU_BATCH; + + if (managed_zone(zone) && !zone_watermark_ok(zone, 0, size, sc->reclaim_idx, 0)) + return false; + } + + /* kswapd should abort if all eligible zones are safe */ + return true; } static bool try_to_shrink_lruvec(struct lruvec *lruvec, struct scan_control *sc) { long nr_to_scan; unsigned long scanned = 0; - unsigned long nr_to_reclaim = get_nr_to_reclaim(sc); int swappiness = get_swappiness(lruvec, sc); /* clean file folios are more likely to exist */ @@ -4683,7 +4704,7 @@ static bool try_to_shrink_lruvec(struct lruvec *lruvec, struct scan_control *sc) if (scanned >= nr_to_scan) break; - if (sc->nr_reclaimed >= nr_to_reclaim) + if (should_abort_scan(lruvec, sc)) break; cond_resched(); @@ -4744,7 +4765,6 @@ static void shrink_many(struct pglist_data *pgdat, struct scan_control *sc) struct lru_gen_folio *lrugen; struct mem_cgroup *memcg; const struct hlist_nulls_node *pos; - unsigned long nr_to_reclaim = get_nr_to_reclaim(sc); bin = first_bin = get_random_u32_below(MEMCG_NR_BINS); restart: @@ -4777,7 +4797,7 @@ restart: rcu_read_lock(); - if (sc->nr_reclaimed >= nr_to_reclaim) + if (should_abort_scan(lruvec, sc)) break; } @@ -4788,7 +4808,7 @@ restart: mem_cgroup_put(memcg); - if (sc->nr_reclaimed >= nr_to_reclaim) + if (!is_a_nulls(pos)) return; /* restart if raced with lru_gen_rotate_memcg() */ -- cgit v1.2.3 From 8aa420617918d12d1f5d55030a503c9418e73c2c Mon Sep 17 00:00:00 2001 From: Yu Zhao Date: Thu, 7 Dec 2023 23:14:06 -0700 Subject: mm/mglru: respect min_ttl_ms with memcgs While investigating kswapd "consuming 100% CPU" [1] (also see "mm/mglru: try to stop at high watermarks"), it was discovered that the memcg LRU can breach the thrashing protection imposed by min_ttl_ms. Before the memcg LRU: kswapd() shrink_node_memcgs() mem_cgroup_iter() inc_max_seq() // always hit a different memcg lru_gen_age_node() mem_cgroup_iter() check the timestamp of the oldest generation After the memcg LRU: kswapd() shrink_many() restart: iterate the memcg LRU: inc_max_seq() // occasionally hit the same memcg if raced with lru_gen_rotate_memcg(): goto restart lru_gen_age_node() mem_cgroup_iter() check the timestamp of the oldest generation Specifically, when the restart happens in shrink_many(), it needs to stick with the (memcg LRU) generation it began with. In other words, it should neither re-read memcg_lru->seq nor age an lruvec of a different generation. Otherwise it can hit the same memcg multiple times without giving lru_gen_age_node() a chance to check the timestamp of that memcg's oldest generation (against min_ttl_ms). [1] https://lore.kernel.org/CAK8fFZ4DY+GtBA40Pm7Nn5xCHy+51w3sfxPqkqpqakSXYyX+Wg@mail.gmail.com/ Link: https://lkml.kernel.org/r/20231208061407.2125867-3-yuzhao@google.com Fixes: e4dde56cd208 ("mm: multi-gen LRU: per-node lru_gen_folio lists") Signed-off-by: Yu Zhao Tested-by: T.J. Mercier Cc: Charan Teja Kalla Cc: Hillf Danton Cc: Jaroslav Pulchart Cc: Kairui Song Cc: Kalesh Singh Cc: Signed-off-by: Andrew Morton --- include/linux/mmzone.h | 30 +++++++++++++++++------------- mm/vmscan.c | 30 ++++++++++++++++-------------- 2 files changed, 33 insertions(+), 27 deletions(-) diff --git a/include/linux/mmzone.h b/include/linux/mmzone.h index 3c25226beeed..23533b12bee2 100644 --- a/include/linux/mmzone.h +++ b/include/linux/mmzone.h @@ -505,33 +505,37 @@ void lru_gen_look_around(struct page_vma_mapped_walk *pvmw); * the old generation, is incremented when all its bins become empty. * * There are four operations: - * 1. MEMCG_LRU_HEAD, which moves an memcg to the head of a random bin in its + * 1. MEMCG_LRU_HEAD, which moves a memcg to the head of a random bin in its * current generation (old or young) and updates its "seg" to "head"; - * 2. MEMCG_LRU_TAIL, which moves an memcg to the tail of a random bin in its + * 2. MEMCG_LRU_TAIL, which moves a memcg to the tail of a random bin in its * current generation (old or young) and updates its "seg" to "tail"; - * 3. MEMCG_LRU_OLD, which moves an memcg to the head of a random bin in the old + * 3. MEMCG_LRU_OLD, which moves a memcg to the head of a random bin in the old * generation, updates its "gen" to "old" and resets its "seg" to "default"; - * 4. MEMCG_LRU_YOUNG, which moves an memcg to the tail of a random bin in the + * 4. MEMCG_LRU_YOUNG, which moves a memcg to the tail of a random bin in the * young generation, updates its "gen" to "young" and resets its "seg" to * "default". * * The events that trigger the above operations are: * 1. Exceeding the soft limit, which triggers MEMCG_LRU_HEAD; - * 2. The first attempt to reclaim an memcg below low, which triggers + * 2. The first attempt to reclaim a memcg below low, which triggers * MEMCG_LRU_TAIL; - * 3. The first attempt to reclaim an memcg below reclaimable size threshold, + * 3. The first attempt to reclaim a memcg below reclaimable size threshold, * which triggers MEMCG_LRU_TAIL; - * 4. The second attempt to reclaim an memcg below reclaimable size threshold, + * 4. The second attempt to reclaim a memcg below reclaimable size threshold, * which triggers MEMCG_LRU_YOUNG; - * 5. Attempting to reclaim an memcg below min, which triggers MEMCG_LRU_YOUNG; + * 5. Attempting to reclaim a memcg below min, which triggers MEMCG_LRU_YOUNG; * 6. Finishing the aging on the eviction path, which triggers MEMCG_LRU_YOUNG; - * 7. Offlining an memcg, which triggers MEMCG_LRU_OLD. + * 7. Offlining a memcg, which triggers MEMCG_LRU_OLD. * - * Note that memcg LRU only applies to global reclaim, and the round-robin - * incrementing of their max_seq counters ensures the eventual fairness to all - * eligible memcgs. For memcg reclaim, it still relies on mem_cgroup_iter(). + * Notes: + * 1. Memcg LRU only applies to global reclaim, and the round-robin incrementing + * of their max_seq counters ensures the eventual fairness to all eligible + * memcgs. For memcg reclaim, it still relies on mem_cgroup_iter(). + * 2. There are only two valid generations: old (seq) and young (seq+1). + * MEMCG_NR_GENS is set to three so that when reading the generation counter + * locklessly, a stale value (seq-1) does not wraparound to young. */ -#define MEMCG_NR_GENS 2 +#define MEMCG_NR_GENS 3 #define MEMCG_NR_BINS 8 struct lru_gen_memcg { diff --git a/mm/vmscan.c b/mm/vmscan.c index bb7dacd8f753..e5fe4a94345f 100644 --- a/mm/vmscan.c +++ b/mm/vmscan.c @@ -4089,6 +4089,9 @@ static void lru_gen_rotate_memcg(struct lruvec *lruvec, int op) else VM_WARN_ON_ONCE(true); + WRITE_ONCE(lruvec->lrugen.seg, seg); + WRITE_ONCE(lruvec->lrugen.gen, new); + hlist_nulls_del_rcu(&lruvec->lrugen.list); if (op == MEMCG_LRU_HEAD || op == MEMCG_LRU_OLD) @@ -4099,9 +4102,6 @@ static void lru_gen_rotate_memcg(struct lruvec *lruvec, int op) pgdat->memcg_lru.nr_memcgs[old]--; pgdat->memcg_lru.nr_memcgs[new]++; - lruvec->lrugen.gen = new; - WRITE_ONCE(lruvec->lrugen.seg, seg); - if (!pgdat->memcg_lru.nr_memcgs[old] && old == get_memcg_gen(pgdat->memcg_lru.seq)) WRITE_ONCE(pgdat->memcg_lru.seq, pgdat->memcg_lru.seq + 1); @@ -4124,11 +4124,11 @@ void lru_gen_online_memcg(struct mem_cgroup *memcg) gen = get_memcg_gen(pgdat->memcg_lru.seq); + lruvec->lrugen.gen = gen; + hlist_nulls_add_tail_rcu(&lruvec->lrugen.list, &pgdat->memcg_lru.fifo[gen][bin]); pgdat->memcg_lru.nr_memcgs[gen]++; - lruvec->lrugen.gen = gen; - spin_unlock_irq(&pgdat->memcg_lru.lock); } } @@ -4635,7 +4635,7 @@ static long get_nr_to_scan(struct lruvec *lruvec, struct scan_control *sc, bool DEFINE_MAX_SEQ(lruvec); if (mem_cgroup_below_min(sc->target_mem_cgroup, memcg)) - return 0; + return -1; if (!should_run_aging(lruvec, max_seq, sc, can_swap, &nr_to_scan)) return nr_to_scan; @@ -4710,7 +4710,7 @@ static bool try_to_shrink_lruvec(struct lruvec *lruvec, struct scan_control *sc) cond_resched(); } - /* whether try_to_inc_max_seq() was successful */ + /* whether this lruvec should be rotated */ return nr_to_scan < 0; } @@ -4764,13 +4764,13 @@ static void shrink_many(struct pglist_data *pgdat, struct scan_control *sc) struct lruvec *lruvec; struct lru_gen_folio *lrugen; struct mem_cgroup *memcg; - const struct hlist_nulls_node *pos; + struct hlist_nulls_node *pos; + gen = get_memcg_gen(READ_ONCE(pgdat->memcg_lru.seq)); bin = first_bin = get_random_u32_below(MEMCG_NR_BINS); restart: op = 0; memcg = NULL; - gen = get_memcg_gen(READ_ONCE(pgdat->memcg_lru.seq)); rcu_read_lock(); @@ -4781,6 +4781,10 @@ restart: } mem_cgroup_put(memcg); + memcg = NULL; + + if (gen != READ_ONCE(lrugen->gen)) + continue; lruvec = container_of(lrugen, struct lruvec, lrugen); memcg = lruvec_memcg(lruvec); @@ -4865,16 +4869,14 @@ static void set_initial_priority(struct pglist_data *pgdat, struct scan_control if (sc->priority != DEF_PRIORITY || sc->nr_to_reclaim < MIN_LRU_BATCH) return; /* - * Determine the initial priority based on ((total / MEMCG_NR_GENS) >> - * priority) * reclaimed_to_scanned_ratio = nr_to_reclaim, where the - * estimated reclaimed_to_scanned_ratio = inactive / total. + * Determine the initial priority based on + * (total >> priority) * reclaimed_to_scanned_ratio = nr_to_reclaim, + * where reclaimed_to_scanned_ratio = inactive / total. */ reclaimable = node_page_state(pgdat, NR_INACTIVE_FILE); if (get_swappiness(lruvec, sc)) reclaimable += node_page_state(pgdat, NR_INACTIVE_ANON); - reclaimable /= MEMCG_NR_GENS; - /* round down reclaimable and round up sc->nr_to_reclaim */ priority = fls_long(reclaimable) - 1 - fls_long(sc->nr_to_reclaim - 1); -- cgit v1.2.3 From 4376807bf2d5371c3e00080c972be568c3f8a7d1 Mon Sep 17 00:00:00 2001 From: Yu Zhao Date: Thu, 7 Dec 2023 23:14:07 -0700 Subject: mm/mglru: reclaim offlined memcgs harder In the effort to reduce zombie memcgs [1], it was discovered that the memcg LRU doesn't apply enough pressure on offlined memcgs. Specifically, instead of rotating them to the tail of the current generation (MEMCG_LRU_TAIL) for a second attempt, it moves them to the next generation (MEMCG_LRU_YOUNG) after the first attempt. Not applying enough pressure on offlined memcgs can cause them to build up, and this can be particularly harmful to memory-constrained systems. On Pixel 8 Pro, launching apps for 50 cycles: Before After Change Zombie memcgs 45 35 -22% [1] https://lore.kernel.org/CABdmKX2M6koq4Q0Cmp_-=wbP0Qa190HdEGGaHfxNS05gAkUtPA@mail.gmail.com/ Link: https://lkml.kernel.org/r/20231208061407.2125867-4-yuzhao@google.com Fixes: e4dde56cd208 ("mm: multi-gen LRU: per-node lru_gen_folio lists") Signed-off-by: Yu Zhao Reported-by: T.J. Mercier Tested-by: T.J. Mercier Cc: Charan Teja Kalla Cc: Hillf Danton Cc: Jaroslav Pulchart Cc: Kairui Song Cc: Kalesh Singh Cc: Signed-off-by: Andrew Morton --- include/linux/mmzone.h | 8 ++++---- mm/vmscan.c | 24 ++++++++++++++++-------- 2 files changed, 20 insertions(+), 12 deletions(-) diff --git a/include/linux/mmzone.h b/include/linux/mmzone.h index 23533b12bee2..9db36e197712 100644 --- a/include/linux/mmzone.h +++ b/include/linux/mmzone.h @@ -519,10 +519,10 @@ void lru_gen_look_around(struct page_vma_mapped_walk *pvmw); * 1. Exceeding the soft limit, which triggers MEMCG_LRU_HEAD; * 2. The first attempt to reclaim a memcg below low, which triggers * MEMCG_LRU_TAIL; - * 3. The first attempt to reclaim a memcg below reclaimable size threshold, - * which triggers MEMCG_LRU_TAIL; - * 4. The second attempt to reclaim a memcg below reclaimable size threshold, - * which triggers MEMCG_LRU_YOUNG; + * 3. The first attempt to reclaim a memcg offlined or below reclaimable size + * threshold, which triggers MEMCG_LRU_TAIL; + * 4. The second attempt to reclaim a memcg offlined or below reclaimable size + * threshold, which triggers MEMCG_LRU_YOUNG; * 5. Attempting to reclaim a memcg below min, which triggers MEMCG_LRU_YOUNG; * 6. Finishing the aging on the eviction path, which triggers MEMCG_LRU_YOUNG; * 7. Offlining a memcg, which triggers MEMCG_LRU_OLD. diff --git a/mm/vmscan.c b/mm/vmscan.c index e5fe4a94345f..9dd8977de5a2 100644 --- a/mm/vmscan.c +++ b/mm/vmscan.c @@ -4598,7 +4598,12 @@ static bool should_run_aging(struct lruvec *lruvec, unsigned long max_seq, } /* try to scrape all its memory if this memcg was deleted */ - *nr_to_scan = mem_cgroup_online(memcg) ? (total >> sc->priority) : total; + if (!mem_cgroup_online(memcg)) { + *nr_to_scan = total; + return false; + } + + *nr_to_scan = total >> sc->priority; /* * The aging tries to be lazy to reduce the overhead, while the eviction @@ -4719,14 +4724,9 @@ static int shrink_one(struct lruvec *lruvec, struct scan_control *sc) bool success; unsigned long scanned = sc->nr_scanned; unsigned long reclaimed = sc->nr_reclaimed; - int seg = lru_gen_memcg_seg(lruvec); struct mem_cgroup *memcg = lruvec_memcg(lruvec); struct pglist_data *pgdat = lruvec_pgdat(lruvec); - /* see the comment on MEMCG_NR_GENS */ - if (!lruvec_is_sizable(lruvec, sc)) - return seg != MEMCG_LRU_TAIL ? MEMCG_LRU_TAIL : MEMCG_LRU_YOUNG; - mem_cgroup_calculate_protection(NULL, memcg); if (mem_cgroup_below_min(NULL, memcg)) @@ -4734,7 +4734,7 @@ static int shrink_one(struct lruvec *lruvec, struct scan_control *sc) if (mem_cgroup_below_low(NULL, memcg)) { /* see the comment on MEMCG_NR_GENS */ - if (seg != MEMCG_LRU_TAIL) + if (lru_gen_memcg_seg(lruvec) != MEMCG_LRU_TAIL) return MEMCG_LRU_TAIL; memcg_memory_event(memcg, MEMCG_LOW); @@ -4750,7 +4750,15 @@ static int shrink_one(struct lruvec *lruvec, struct scan_control *sc) flush_reclaim_state(sc); - return success ? MEMCG_LRU_YOUNG : 0; + if (success && mem_cgroup_online(memcg)) + return MEMCG_LRU_YOUNG; + + if (!success && lruvec_is_sizable(lruvec, sc)) + return 0; + + /* one retry if offlined or too small */ + return lru_gen_memcg_seg(lruvec) != MEMCG_LRU_TAIL ? + MEMCG_LRU_TAIL : MEMCG_LRU_YOUNG; } #ifdef CONFIG_MEMCG -- cgit v1.2.3 From 9e45e39dc249c970d99d2681f6bcb55736fd725c Mon Sep 17 00:00:00 2001 From: "Steven Rostedt (Google)" Date: Mon, 11 Dec 2023 11:44:20 -0500 Subject: ring-buffer: Do not update before stamp when switching sub-buffers The ring buffer timestamps are synchronized by two timestamp placeholders. One is the "before_stamp" and the other is the "write_stamp" (sometimes referred to as the "after stamp" but only in the comments. These two stamps are key to knowing how to handle nested events coming in with a lockless system. When moving across sub-buffers, the before stamp is updated but the write stamp is not. There's an effort to put back the before stamp to something that seems logical in case there's nested events. But as the current event is about to cross sub-buffers, and so will any new nested event that happens, updating the before stamp is useless, and could even introduce new race conditions. The first event on a sub-buffer simply uses the sub-buffer's timestamp and keeps a "delta" of zero. The "before_stamp" and "write_stamp" are not used in the algorithm in this case. There's no reason to try to fix the before_stamp when this happens. As a bonus, it removes a cmpxchg() when crossing sub-buffers! Link: https://lore.kernel.org/linux-trace-kernel/20231211114420.36dde01b@gandalf.local.home Cc: stable@vger.kernel.org Cc: Mark Rutland Cc: Mathieu Desnoyers Fixes: a389d86f7fd09 ("ring-buffer: Have nested events still record running time stamp") Reviewed-by: Masami Hiramatsu (Google) Signed-off-by: Steven Rostedt (Google) --- kernel/trace/ring_buffer.c | 9 +-------- 1 file changed, 1 insertion(+), 8 deletions(-) diff --git a/kernel/trace/ring_buffer.c b/kernel/trace/ring_buffer.c index dcd47895b424..c7abcc215fe2 100644 --- a/kernel/trace/ring_buffer.c +++ b/kernel/trace/ring_buffer.c @@ -3607,14 +3607,7 @@ __rb_reserve_next(struct ring_buffer_per_cpu *cpu_buffer, /* See if we shot pass the end of this buffer page */ if (unlikely(write > BUF_PAGE_SIZE)) { - /* before and after may now different, fix it up*/ - b_ok = rb_time_read(&cpu_buffer->before_stamp, &info->before); - a_ok = rb_time_read(&cpu_buffer->write_stamp, &info->after); - if (a_ok && b_ok && info->before != info->after) - (void)rb_time_cmpxchg(&cpu_buffer->before_stamp, - info->before, info->after); - if (a_ok && b_ok) - check_buffer(cpu_buffer, info, CHECK_FULL_PAGE); + check_buffer(cpu_buffer, info, CHECK_FULL_PAGE); return rb_move_tail(cpu_buffer, tail, info); } -- cgit v1.2.3 From b049525855fdd0024881c9b14b8fbec61c3f53d3 Mon Sep 17 00:00:00 2001 From: "Steven Rostedt (Google)" Date: Tue, 12 Dec 2023 07:25:58 -0500 Subject: ring-buffer: Have saved event hold the entire event For the ring buffer iterator (non-consuming read), the event needs to be copied into the iterator buffer to make sure that a writer does not overwrite it while the user is reading it. If a write happens during the copy, the buffer is simply discarded. But the temp buffer itself was not big enough. The allocation of the buffer was only BUF_MAX_DATA_SIZE, which is the maximum data size that can be passed into the ring buffer and saved. But the temp buffer needs to hold the meta data as well. That would be BUF_PAGE_SIZE and not BUF_MAX_DATA_SIZE. Link: https://lore.kernel.org/linux-trace-kernel/20231212072558.61f76493@gandalf.local.home Cc: stable@vger.kernel.org Cc: Masami Hiramatsu Cc: Mark Rutland Cc: Mathieu Desnoyers Fixes: 785888c544e04 ("ring-buffer: Have rb_iter_head_event() handle concurrent writer") Signed-off-by: Steven Rostedt (Google) --- kernel/trace/ring_buffer.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/kernel/trace/ring_buffer.c b/kernel/trace/ring_buffer.c index c7abcc215fe2..1d9caee7f542 100644 --- a/kernel/trace/ring_buffer.c +++ b/kernel/trace/ring_buffer.c @@ -2409,7 +2409,7 @@ rb_iter_head_event(struct ring_buffer_iter *iter) */ barrier(); - if ((iter->head + length) > commit || length > BUF_MAX_DATA_SIZE) + if ((iter->head + length) > commit || length > BUF_PAGE_SIZE) /* Writer corrupted the read? */ goto reset; @@ -5118,7 +5118,8 @@ ring_buffer_read_prepare(struct trace_buffer *buffer, int cpu, gfp_t flags) if (!iter) return NULL; - iter->event = kmalloc(BUF_MAX_DATA_SIZE, flags); + /* Holds the entire event: data and meta data */ + iter->event = kmalloc(BUF_PAGE_SIZE, flags); if (!iter->event) { kfree(iter); return NULL; -- cgit v1.2.3 From 60be76eeabb3d83858cc6577fc65c7d0f36ffd42 Mon Sep 17 00:00:00 2001 From: "Steven Rostedt (Google)" Date: Tue, 12 Dec 2023 08:44:44 -0500 Subject: tracing: Add size check when printing trace_marker output If for some reason the trace_marker write does not have a nul byte for the string, it will overflow the print: trace_seq_printf(s, ": %s", field->buf); The field->buf could be missing the nul byte. To prevent overflow, add the max size that the buf can be by using the event size and the field location. int max = iter->ent_size - offsetof(struct print_entry, buf); trace_seq_printf(s, ": %*.s", max, field->buf); Link: https://lore.kernel.org/linux-trace-kernel/20231212084444.4619b8ce@gandalf.local.home Cc: Mark Rutland Cc: Mathieu Desnoyers Reviewed-by: Masami Hiramatsu (Google) Signed-off-by: Steven Rostedt (Google) --- kernel/trace/trace_output.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/kernel/trace/trace_output.c b/kernel/trace/trace_output.c index d8b302d01083..3e7fa44dc2b2 100644 --- a/kernel/trace/trace_output.c +++ b/kernel/trace/trace_output.c @@ -1587,11 +1587,12 @@ static enum print_line_t trace_print_print(struct trace_iterator *iter, { struct print_entry *field; struct trace_seq *s = &iter->seq; + int max = iter->ent_size - offsetof(struct print_entry, buf); trace_assign_type(field, iter->ent); seq_print_ip_sym(s, field->ip, flags); - trace_seq_printf(s, ": %s", field->buf); + trace_seq_printf(s, ": %.*s", max, field->buf); return trace_handle_return(s); } @@ -1600,10 +1601,11 @@ static enum print_line_t trace_print_raw(struct trace_iterator *iter, int flags, struct trace_event *event) { struct print_entry *field; + int max = iter->ent_size - offsetof(struct print_entry, buf); trace_assign_type(field, iter->ent); - trace_seq_printf(&iter->seq, "# %lx %s", field->ip, field->buf); + trace_seq_printf(&iter->seq, "# %lx %.*s", field->ip, max, field->buf); return trace_handle_return(&iter->seq); } -- cgit v1.2.3 From f3f32a356c0d2379d4431364e74f101f8f075ce3 Mon Sep 17 00:00:00 2001 From: Salvatore Dipietro Date: Fri, 8 Dec 2023 10:20:49 -0800 Subject: tcp: disable tcp_autocorking for socket when TCP_NODELAY flag is set Based on the tcp man page, if TCP_NODELAY is set, it disables Nagle's algorithm and packets are sent as soon as possible. However in the `tcp_push` function where autocorking is evaluated the `nonagle` value set by TCP_NODELAY is not considered which can trigger unexpected corking of packets and induce delays. For example, if two packets are generated as part of a server's reply, if the first one is not transmitted on the wire quickly enough, the second packet can trigger the autocorking in `tcp_push` and be delayed instead of sent as soon as possible. It will either wait for additional packets to be coalesced or an ACK from the client before transmitting the corked packet. This can interact badly if the receiver has tcp delayed acks enabled, introducing 40ms extra delay in completion times. It is not always possible to control who has delayed acks set, but it is possible to adjust when and how autocorking is triggered. Patch prevents autocorking if the TCP_NODELAY flag is set on the socket. Patch has been tested using an AWS c7g.2xlarge instance with Ubuntu 22.04 and Apache Tomcat 9.0.83 running the basic servlet below: import java.io.IOException; import java.io.OutputStreamWriter; import java.io.PrintWriter; import javax.servlet.ServletException; import javax.servlet.http.HttpServlet; import javax.servlet.http.HttpServletRequest; import javax.servlet.http.HttpServletResponse; public class HelloWorldServlet extends HttpServlet { @Override protected void doGet(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException { response.setContentType("text/html;charset=utf-8"); OutputStreamWriter osw = new OutputStreamWriter(response.getOutputStream(),"UTF-8"); String s = "a".repeat(3096); osw.write(s,0,s.length()); osw.flush(); } } Load was applied using wrk2 (https://github.com/kinvolk/wrk2) from an AWS c6i.8xlarge instance. With the current auto-corking behavior and TCP_NODELAY set an additional 40ms latency from P99.99+ values are observed. With the patch applied we see no occurrences of 40ms latencies. The patch has also been tested with iperf and uperf benchmarks and no regression was observed. # No patch with tcp_autocorking=1 and TCP_NODELAY set on all sockets ./wrk -t32 -c128 -d40s --latency -R10000 http://172.31.49.177:8080/hello/hello' ... 50.000% 0.91ms 75.000% 1.12ms 90.000% 1.46ms 99.000% 1.73ms 99.900% 1.96ms 99.990% 43.62ms <<< 40+ ms extra latency 99.999% 48.32ms 100.000% 49.34ms # With patch ./wrk -t32 -c128 -d40s --latency -R10000 http://172.31.49.177:8080/hello/hello' ... 50.000% 0.89ms 75.000% 1.13ms 90.000% 1.44ms 99.000% 1.67ms 99.900% 1.78ms 99.990% 2.27ms <<< no 40+ ms extra latency 99.999% 3.71ms 100.000% 4.57ms Fixes: f54b311142a9 ("tcp: auto corking") Signed-off-by: Salvatore Dipietro Reviewed-by: Eric Dumazet Signed-off-by: David S. Miller --- net/ipv4/tcp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c index ff6838ca2e58..96fc89ccec33 100644 --- a/net/ipv4/tcp.c +++ b/net/ipv4/tcp.c @@ -716,7 +716,7 @@ void tcp_push(struct sock *sk, int flags, int mss_now, tcp_mark_urg(tp, flags); - if (tcp_should_autocork(sk, skb, size_goal)) { + if (!nonagle && tcp_should_autocork(sk, skb, size_goal)) { /* avoid atomic op if TSQ_THROTTLED bit is already set */ if (!test_bit(TSQ_THROTTLED, &sk->sk_tsq_flags)) { -- cgit v1.2.3 From fa97e21e74df5ef63a442e4cfd13fd113fc8196e Mon Sep 17 00:00:00 2001 From: David Heidelberg Date: Tue, 12 Dec 2023 21:09:17 +0100 Subject: dt-bindings: panel-simple-dsi: move LG 5" HD TFT LCD panel into DSI yaml Originally was in the panel-simple, but belongs to panel-simple-dsi. See arch/arm/boot/dts/nvidia/tegra114-roth.dts for more details. Resolves the following warning: ``` arch/arm/boot/dts/tegra114-roth.dt.yaml: panel@0: 'reg' does not match any of the regexes: 'pinctrl-[0-9]+' From schema: Documentation/devicetree/bindings/display/panel/panel-simple.yaml ``` Fixes: 310abcea76e9 ("dt-bindings: display: convert simple lg panels to DT Schema") Signed-off-by: David Heidelberg Acked-by: Krzysztof Kozlowski Acked-by: Jessica Zhang Link: https://lore.kernel.org/r/20231212200934.99262-1-david@ixit.cz Signed-off-by: Neil Armstrong Link: https://patchwork.freedesktop.org/patch/msgid/20231212200934.99262-1-david@ixit.cz --- Documentation/devicetree/bindings/display/panel/panel-simple-dsi.yaml | 2 ++ Documentation/devicetree/bindings/display/panel/panel-simple.yaml | 2 -- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/Documentation/devicetree/bindings/display/panel/panel-simple-dsi.yaml b/Documentation/devicetree/bindings/display/panel/panel-simple-dsi.yaml index 73674baea75d..f9160d7bac3c 100644 --- a/Documentation/devicetree/bindings/display/panel/panel-simple-dsi.yaml +++ b/Documentation/devicetree/bindings/display/panel/panel-simple-dsi.yaml @@ -42,6 +42,8 @@ properties: - lg,acx467akm-7 # LG Corporation 7" WXGA TFT LCD panel - lg,ld070wx3-sl01 + # LG Corporation 5" HD TFT LCD panel + - lg,lh500wx1-sd03 # One Stop Displays OSD101T2587-53TS 10.1" 1920x1200 panel - osddisplays,osd101t2587-53ts # Panasonic 10" WUXGA TFT LCD panel diff --git a/Documentation/devicetree/bindings/display/panel/panel-simple.yaml b/Documentation/devicetree/bindings/display/panel/panel-simple.yaml index 3ec9ee95045f..11422af3477e 100644 --- a/Documentation/devicetree/bindings/display/panel/panel-simple.yaml +++ b/Documentation/devicetree/bindings/display/panel/panel-simple.yaml @@ -208,8 +208,6 @@ properties: - lemaker,bl035-rgb-002 # LG 7" (800x480 pixels) TFT LCD panel - lg,lb070wv8 - # LG Corporation 5" HD TFT LCD panel - - lg,lh500wx1-sd03 # LG LP079QX1-SP0V 7.9" (1536x2048 pixels) TFT LCD panel - lg,lp079qx1-sp0v # LG 9.7" (2048x1536 pixels) TFT LCD panel -- cgit v1.2.3 From e87d3a1370ce9f04770d789bcf7cce44865d2e8d Mon Sep 17 00:00:00 2001 From: Yanteng Si Date: Mon, 11 Dec 2023 18:33:11 +0800 Subject: stmmac: dwmac-loongson: Make sure MDIO is initialized before use Generic code will use mdio. If it is not initialized before use, the kernel will Oops. Fixes: 30bba69d7db4 ("stmmac: pci: Add dwmac support for Loongson") Signed-off-by: Yanteng Si Signed-off-by: Feiyang Chen Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller --- drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c | 14 ++++++-------- 1 file changed, 6 insertions(+), 8 deletions(-) diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c index 2cd6fce5c993..e7701326adc6 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c @@ -68,17 +68,15 @@ static int loongson_dwmac_probe(struct pci_dev *pdev, const struct pci_device_id if (!plat) return -ENOMEM; + plat->mdio_bus_data = devm_kzalloc(&pdev->dev, + sizeof(*plat->mdio_bus_data), + GFP_KERNEL); + if (!plat->mdio_bus_data) + return -ENOMEM; + plat->mdio_node = of_get_child_by_name(np, "mdio"); if (plat->mdio_node) { dev_info(&pdev->dev, "Found MDIO subnode\n"); - - plat->mdio_bus_data = devm_kzalloc(&pdev->dev, - sizeof(*plat->mdio_bus_data), - GFP_KERNEL); - if (!plat->mdio_bus_data) { - ret = -ENOMEM; - goto err_put_node; - } plat->mdio_bus_data->needs_reset = true; } -- cgit v1.2.3 From 31fea092c6f9f8fb2c40a08137907f5fbeae55dd Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Mon, 11 Dec 2023 18:33:53 +0800 Subject: stmmac: dwmac-loongson: drop useless check for compatible fallback Device binds to proper PCI ID (LOONGSON, 0x7a03), already listed in DTS, so checking for some other compatible does not make sense. It cannot be bound to unsupported platform. Drop useless, incorrect (space in between) and undocumented compatible. Signed-off-by: Krzysztof Kozlowski Signed-off-by: Yanteng Si Reviewed-by: Conor Dooley Acked-by: Jiaxun Yang Signed-off-by: David S. Miller --- drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c | 5 ----- 1 file changed, 5 deletions(-) diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c index e7701326adc6..9e40c28d453a 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c @@ -59,11 +59,6 @@ static int loongson_dwmac_probe(struct pci_dev *pdev, const struct pci_device_id return -ENODEV; } - if (!of_device_is_compatible(np, "loongson, pci-gmac")) { - pr_info("dwmac_loongson_pci: Incompatible OF node\n"); - return -ENODEV; - } - plat = devm_kzalloc(&pdev->dev, sizeof(*plat), GFP_KERNEL); if (!plat) return -ENOMEM; -- cgit v1.2.3 From 4907a3f54b12b8209864572a312cf967befcae80 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Mon, 11 Dec 2023 18:33:54 +0800 Subject: MIPS: dts: loongson: drop incorrect dwmac fallback compatible Device binds to proper PCI ID (LOONGSON, 0x7a03), already listed in DTS, so checking for some other compatible does not make sense. It cannot be bound to unsupported platform. Drop useless, incorrect (space in between) and undocumented compatible. Signed-off-by: Krzysztof Kozlowski Signed-off-by: Yanteng Si Reviewed-by: Conor Dooley Acked-by: Jiaxun Yang Signed-off-by: David S. Miller --- arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi | 3 +-- arch/mips/boot/dts/loongson/ls7a-pch.dtsi | 3 +-- 2 files changed, 2 insertions(+), 4 deletions(-) diff --git a/arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi b/arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi index f878f47e4501..ee3e2153dd13 100644 --- a/arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi +++ b/arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi @@ -130,8 +130,7 @@ compatible = "pci0014,7a03.0", "pci0014,7a03", "pciclass0c0320", - "pciclass0c03", - "loongson, pci-gmac"; + "pciclass0c03"; reg = <0x1800 0x0 0x0 0x0 0x0>; interrupts = <12 IRQ_TYPE_LEVEL_LOW>, diff --git a/arch/mips/boot/dts/loongson/ls7a-pch.dtsi b/arch/mips/boot/dts/loongson/ls7a-pch.dtsi index 7c69e8245c2f..cce9428afc41 100644 --- a/arch/mips/boot/dts/loongson/ls7a-pch.dtsi +++ b/arch/mips/boot/dts/loongson/ls7a-pch.dtsi @@ -193,8 +193,7 @@ compatible = "pci0014,7a03.0", "pci0014,7a03", "pciclass020000", - "pciclass0200", - "loongson, pci-gmac"; + "pciclass0200"; reg = <0x1800 0x0 0x0 0x0 0x0>; interrupts = <12 IRQ_TYPE_LEVEL_HIGH>, -- cgit v1.2.3 From 0cf72f7f14d12cb065c3d01954cf42fc5638aa69 Mon Sep 17 00:00:00 2001 From: Haren Myneni Date: Sat, 25 Nov 2023 15:51:04 -0800 Subject: powerpc/pseries/vas: Migration suspend waits for no in-progress open windows The hypervisor returns migration failure if all VAS windows are not closed. During pre-migration stage, vas_migration_handler() sets migration_in_progress flag and closes all windows from the list. The allocate VAS window routine checks the migration flag, setup the window and then add it to the list. So there is possibility of the migration handler missing the window that is still in the process of setup. t1: Allocate and open VAS t2: Migration event window lock vas_pseries_mutex If migration_in_progress set unlock vas_pseries_mutex return open window HCALL unlock vas_pseries_mutex Modify window HCALL lock vas_pseries_mutex setup window migration_in_progress=true Closes all windows from the list // May miss windows that are // not in the list unlock vas_pseries_mutex lock vas_pseries_mutex return if nr_closed_windows == 0 // No DLPAR CPU or migration add window to the list // Window will be added to the // list after the setup is completed unlock vas_pseries_mutex return unlock vas_pseries_mutex Close VAS window // due to DLPAR CPU or migration return -EBUSY This patch resolves the issue with the following steps: - Set the migration_in_progress flag without holding mutex. - Introduce nr_open_wins_progress counter in VAS capabilities struct - This counter tracks the number of open windows are still in progress - The allocate setup window thread closes windows if the migration is set and decrements nr_open_window_progress counter - The migration handler waits for no in-progress open windows. The code flow with the fix is as follows: t1: Allocate and open VAS t2: Migration event window lock vas_pseries_mutex If migration_in_progress set unlock vas_pseries_mutex return open window HCALL nr_open_wins_progress++ // Window opened, but not // added to the list yet unlock vas_pseries_mutex Modify window HCALL migration_in_progress=true setup window lock vas_pseries_mutex Closes all windows from the list While nr_open_wins_progress { unlock vas_pseries_mutex lock vas_pseries_mutex sleep if nr_closed_windows == 0 // Wait if any open window in or migration is not started // progress. The open window // No DLPAR CPU or migration // thread closes the window without add window to the list // adding to the list and return if nr_open_wins_progress-- // the migration is in progress. unlock vas_pseries_mutex return Close VAS window nr_open_wins_progress-- unlock vas_pseries_mutex return -EBUSY lock vas_pseries_mutex } unlock vas_pseries_mutex return Fixes: 37e6764895ef ("powerpc/pseries/vas: Add VAS migration handler") Signed-off-by: Haren Myneni Signed-off-by: Michael Ellerman Link: https://msgid.link/20231125235104.3405008-1-haren@linux.ibm.com --- arch/powerpc/platforms/pseries/vas.c | 51 +++++++++++++++++++++++++++++++----- arch/powerpc/platforms/pseries/vas.h | 2 ++ 2 files changed, 46 insertions(+), 7 deletions(-) diff --git a/arch/powerpc/platforms/pseries/vas.c b/arch/powerpc/platforms/pseries/vas.c index b1f25bac280b..71d52a670d95 100644 --- a/arch/powerpc/platforms/pseries/vas.c +++ b/arch/powerpc/platforms/pseries/vas.c @@ -385,11 +385,15 @@ static struct vas_window *vas_allocate_window(int vas_id, u64 flags, * same fault IRQ is not freed by the OS before. */ mutex_lock(&vas_pseries_mutex); - if (migration_in_progress) + if (migration_in_progress) { rc = -EBUSY; - else + } else { rc = allocate_setup_window(txwin, (u64 *)&domain[0], cop_feat_caps->win_type); + if (!rc) + caps->nr_open_wins_progress++; + } + mutex_unlock(&vas_pseries_mutex); if (rc) goto out; @@ -404,8 +408,17 @@ static struct vas_window *vas_allocate_window(int vas_id, u64 flags, goto out_free; txwin->win_type = cop_feat_caps->win_type; - mutex_lock(&vas_pseries_mutex); + /* + * The migration SUSPEND thread sets migration_in_progress and + * closes all open windows from the list. But the window is + * added to the list after open and modify HCALLs. So possible + * that migration_in_progress is set before modify HCALL which + * may cause some windows are still open when the hypervisor + * initiates the migration. + * So checks the migration_in_progress flag again and close all + * open windows. + * * Possible to lose the acquired credit with DLPAR core * removal after the window is opened. So if there are any * closed windows (means with lost credits), do not give new @@ -413,9 +426,11 @@ static struct vas_window *vas_allocate_window(int vas_id, u64 flags, * after the existing windows are reopened when credits are * available. */ - if (!caps->nr_close_wins) { + mutex_lock(&vas_pseries_mutex); + if (!caps->nr_close_wins && !migration_in_progress) { list_add(&txwin->win_list, &caps->list); caps->nr_open_windows++; + caps->nr_open_wins_progress--; mutex_unlock(&vas_pseries_mutex); vas_user_win_add_mm_context(&txwin->vas_win.task_ref); return &txwin->vas_win; @@ -433,6 +448,12 @@ out_free: */ free_irq_setup(txwin); h_deallocate_vas_window(txwin->vas_win.winid); + /* + * Hold mutex and reduce nr_open_wins_progress counter. + */ + mutex_lock(&vas_pseries_mutex); + caps->nr_open_wins_progress--; + mutex_unlock(&vas_pseries_mutex); out: atomic_dec(&cop_feat_caps->nr_used_credits); kfree(txwin); @@ -937,14 +958,14 @@ int vas_migration_handler(int action) struct vas_caps *vcaps; int i, rc = 0; + pr_info("VAS migration event %d\n", action); + /* * NX-GZIP is not enabled. Nothing to do for migration. */ if (!copypaste_feat) return rc; - mutex_lock(&vas_pseries_mutex); - if (action == VAS_SUSPEND) migration_in_progress = true; else @@ -990,12 +1011,27 @@ int vas_migration_handler(int action) switch (action) { case VAS_SUSPEND: + mutex_lock(&vas_pseries_mutex); rc = reconfig_close_windows(vcaps, vcaps->nr_open_windows, true); + /* + * Windows are included in the list after successful + * open. So wait for closing these in-progress open + * windows in vas_allocate_window() which will be + * done if the migration_in_progress is set. + */ + while (vcaps->nr_open_wins_progress) { + mutex_unlock(&vas_pseries_mutex); + msleep(10); + mutex_lock(&vas_pseries_mutex); + } + mutex_unlock(&vas_pseries_mutex); break; case VAS_RESUME: + mutex_lock(&vas_pseries_mutex); atomic_set(&caps->nr_total_credits, new_nr_creds); rc = reconfig_open_windows(vcaps, new_nr_creds, true); + mutex_unlock(&vas_pseries_mutex); break; default: /* should not happen */ @@ -1011,8 +1047,9 @@ int vas_migration_handler(int action) goto out; } + pr_info("VAS migration event (%d) successful\n", action); + out: - mutex_unlock(&vas_pseries_mutex); return rc; } diff --git a/arch/powerpc/platforms/pseries/vas.h b/arch/powerpc/platforms/pseries/vas.h index 7115043ec488..45567cd13178 100644 --- a/arch/powerpc/platforms/pseries/vas.h +++ b/arch/powerpc/platforms/pseries/vas.h @@ -91,6 +91,8 @@ struct vas_cop_feat_caps { struct vas_caps { struct vas_cop_feat_caps caps; struct list_head list; /* List of open windows */ + int nr_open_wins_progress; /* Number of open windows in */ + /* progress. Used in migration */ int nr_close_wins; /* closed windows in the hypervisor for DLPAR */ int nr_open_windows; /* Number of successful open windows */ u8 feat; /* Feature type */ -- cgit v1.2.3 From d2441d3e8c0c076d0a2e705fa235c76869a85140 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Tue, 5 Dec 2023 16:11:05 +1100 Subject: MAINTAINERS: powerpc: Add Aneesh & Naveen Aneesh and Naveen are helping out with some aspects of upstream maintenance, add them as reviewers. Acked-by: "Aneesh Kumar K.V (IBM)" Acked-by: "Naveen N. Rao" Signed-off-by: Michael Ellerman Link: https://msgid.link/20231205051105.736470-1-mpe@ellerman.id.au --- MAINTAINERS | 2 ++ 1 file changed, 2 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index ea790149af79..0a842ee1c50b 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -12240,6 +12240,8 @@ LINUX FOR POWERPC (32-BIT AND 64-BIT) M: Michael Ellerman R: Nicholas Piggin R: Christophe Leroy +R: Aneesh Kumar K.V +R: Naveen N. Rao L: linuxppc-dev@lists.ozlabs.org S: Supported W: https://github.com/linuxppc/wiki/wiki -- cgit v1.2.3 From 595e52284d24adc376890d3fc93bdca4707d9aca Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Wed, 13 Dec 2023 08:58:15 -0700 Subject: io_uring/poll: don't enable lazy wake for POLLEXCLUSIVE There are a few quirks around using lazy wake for poll unconditionally, and one of them is related the EPOLLEXCLUSIVE. Those may trigger exclusive wakeups, which wake a limited number of entries in the wait queue. If that wake number is less than the number of entries someone is waiting for (and that someone is also using DEFER_TASKRUN), then we can get stuck waiting for more entries while we should be processing the ones we already got. If we're doing exclusive poll waits, flag the request as not being compatible with lazy wakeups. Reported-by: Pavel Begunkov Fixes: 6ce4a93dbb5b ("io_uring/poll: use IOU_F_TWQ_LAZY_WAKE for wakeups") Signed-off-by: Jens Axboe --- include/linux/io_uring_types.h | 3 +++ io_uring/poll.c | 20 +++++++++++++++++--- 2 files changed, 20 insertions(+), 3 deletions(-) diff --git a/include/linux/io_uring_types.h b/include/linux/io_uring_types.h index 805bb635cdf5..239a4f68801b 100644 --- a/include/linux/io_uring_types.h +++ b/include/linux/io_uring_types.h @@ -434,6 +434,7 @@ enum { /* keep async read/write and isreg together and in order */ REQ_F_SUPPORT_NOWAIT_BIT, REQ_F_ISREG_BIT, + REQ_F_POLL_NO_LAZY_BIT, /* not a real bit, just to check we're not overflowing the space */ __REQ_F_LAST_BIT, @@ -501,6 +502,8 @@ enum { REQ_F_CLEAR_POLLIN = BIT(REQ_F_CLEAR_POLLIN_BIT), /* hashed into ->cancel_hash_locked, protected by ->uring_lock */ REQ_F_HASH_LOCKED = BIT(REQ_F_HASH_LOCKED_BIT), + /* don't use lazy poll wake for this request */ + REQ_F_POLL_NO_LAZY = BIT(REQ_F_POLL_NO_LAZY_BIT), }; typedef void (*io_req_tw_func_t)(struct io_kiocb *req, struct io_tw_state *ts); diff --git a/io_uring/poll.c b/io_uring/poll.c index d38d05edb4fa..d59b74a99d4e 100644 --- a/io_uring/poll.c +++ b/io_uring/poll.c @@ -366,11 +366,16 @@ void io_poll_task_func(struct io_kiocb *req, struct io_tw_state *ts) static void __io_poll_execute(struct io_kiocb *req, int mask) { + unsigned flags = 0; + io_req_set_res(req, mask, 0); req->io_task_work.func = io_poll_task_func; trace_io_uring_task_add(req, mask); - __io_req_task_work_add(req, IOU_F_TWQ_LAZY_WAKE); + + if (!(req->flags & REQ_F_POLL_NO_LAZY)) + flags = IOU_F_TWQ_LAZY_WAKE; + __io_req_task_work_add(req, flags); } static inline void io_poll_execute(struct io_kiocb *req, int res) @@ -526,10 +531,19 @@ static void __io_queue_proc(struct io_poll *poll, struct io_poll_table *pt, poll->head = head; poll->wait.private = (void *) wqe_private; - if (poll->events & EPOLLEXCLUSIVE) + if (poll->events & EPOLLEXCLUSIVE) { + /* + * Exclusive waits may only wake a limited amount of entries + * rather than all of them, this may interfere with lazy + * wake if someone does wait(events > 1). Ensure we don't do + * lazy wake for those, as we need to process each one as they + * come in. + */ + req->flags |= REQ_F_POLL_NO_LAZY; add_wait_queue_exclusive(head, &poll->wait); - else + } else { add_wait_queue(head, &poll->wait); + } } static void io_poll_queue_proc(struct file *file, struct wait_queue_head *head, -- cgit v1.2.3 From 485053bb81c81a122edd982b263277e65d7485c5 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Wed, 13 Dec 2023 11:14:09 -0500 Subject: fix ufs_get_locked_folio() breakage filemap_lock_folio() returns ERR_PTR(-ENOENT) if the thing is not in cache - not NULL like find_lock_page() used to. Fixes: 5fb7bd50b351 "ufs: add ufs_get_locked_folio and ufs_put_locked_folio" Signed-off-by: Al Viro --- fs/ufs/util.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/ufs/util.c b/fs/ufs/util.c index 13ba34e6d64f..2acf191eb89e 100644 --- a/fs/ufs/util.c +++ b/fs/ufs/util.c @@ -245,7 +245,7 @@ struct folio *ufs_get_locked_folio(struct address_space *mapping, { struct inode *inode = mapping->host; struct folio *folio = filemap_lock_folio(mapping, index); - if (!folio) { + if (IS_ERR(folio)) { folio = read_mapping_folio(mapping, index, NULL); if (IS_ERR(folio)) { -- cgit v1.2.3 From 6c9dbee84cd005bed5f9d07b3a2797ae6414b435 Mon Sep 17 00:00:00 2001 From: Farouk Bouabid Date: Wed, 13 Dec 2023 15:50:45 +0100 Subject: drm/panel: ltk050h3146w: Set burst mode for ltk050h3148w The ltk050h3148w variant expects the horizontal component lane byte clock cycle(lbcc) to be calculated using lane_mbps (burst mode) instead of the pixel clock. Using the pixel clock rate by default for this calculation was introduced in commit ac87d23694f4 ("drm/bridge: synopsys: dw-mipi-dsi: Use pixel clock rate to calculate lbcc") and starting from commit 93e82bb4de01 ("drm/bridge: synopsys: dw-mipi-dsi: Fix hcomponent lbcc for burst mode") only panels that support burst mode can keep using the lane_mbps. So add MIPI_DSI_MODE_VIDEO_BURST as part of the mode_flags for the dsi host. Fixes: 93e82bb4de01 ("drm/bridge: synopsys: dw-mipi-dsi: Fix hcomponent lbcc for burst mode") Signed-off-by: Farouk Bouabid Reviewed-by: Jessica Zhang Signed-off-by: Heiko Stuebner Link: https://patchwork.freedesktop.org/patch/msgid/20231213145045.41020-1-farouk.bouabid@theobroma-systems.com --- drivers/gpu/drm/panel/panel-leadtek-ltk050h3146w.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/panel/panel-leadtek-ltk050h3146w.c b/drivers/gpu/drm/panel/panel-leadtek-ltk050h3146w.c index 6e3670508e3a..30919c872ac8 100644 --- a/drivers/gpu/drm/panel/panel-leadtek-ltk050h3146w.c +++ b/drivers/gpu/drm/panel/panel-leadtek-ltk050h3146w.c @@ -326,7 +326,7 @@ static const struct drm_display_mode ltk050h3148w_mode = { static const struct ltk050h3146w_desc ltk050h3148w_data = { .mode = <k050h3148w_mode, .init = ltk050h3148w_init_sequence, - .mode_flags = MIPI_DSI_MODE_VIDEO_SYNC_PULSE, + .mode_flags = MIPI_DSI_MODE_VIDEO_SYNC_PULSE | MIPI_DSI_MODE_VIDEO_BURST, }; static int ltk050h3146w_init_sequence(struct ltk050h3146w *ctx) -- cgit v1.2.3 From 9702817384aa4a3700643d0b26e71deac0172cfd Mon Sep 17 00:00:00 2001 From: Jakub Kicinski Date: Wed, 13 Dec 2023 10:56:29 -0800 Subject: Revert "tcp: disable tcp_autocorking for socket when TCP_NODELAY flag is set" This reverts commit f3f32a356c0d2379d4431364e74f101f8f075ce3. Paolo reports that the change disables autocorking even after the userspace sets TCP_CORK. Fixes: f3f32a356c0d ("tcp: disable tcp_autocorking for socket when TCP_NODELAY flag is set") Link: https://lore.kernel.org/r/0d30d5a41d3ac990573016308aaeacb40a9dc79f.camel@redhat.com Signed-off-by: Jakub Kicinski --- net/ipv4/tcp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c index 96fc89ccec33..ff6838ca2e58 100644 --- a/net/ipv4/tcp.c +++ b/net/ipv4/tcp.c @@ -716,7 +716,7 @@ void tcp_push(struct sock *sk, int flags, int mss_now, tcp_mark_urg(tp, flags); - if (!nonagle && tcp_should_autocork(sk, skb, size_goal)) { + if (tcp_should_autocork(sk, skb, size_goal)) { /* avoid atomic op if TSQ_THROTTLED bit is already set */ if (!test_bit(TSQ_THROTTLED, &sk->sk_tsq_flags)) { -- cgit v1.2.3 From 829649443e78d85db0cff0c37cadb28fbb1a5f6f Mon Sep 17 00:00:00 2001 From: Yusong Gao Date: Wed, 13 Dec 2023 10:31:10 +0000 Subject: sign-file: Fix incorrect return values check There are some wrong return values check in sign-file when call OpenSSL API. The ERR() check cond is wrong because of the program only check the return value is < 0 which ignored the return val is 0. For example: 1. CMS_final() return 1 for success or 0 for failure. 2. i2d_CMS_bio_stream() returns 1 for success or 0 for failure. 3. i2d_TYPEbio() return 1 for success and 0 for failure. 4. BIO_free() return 1 for success and 0 for failure. Link: https://www.openssl.org/docs/manmaster/man3/ Fixes: e5a2e3c84782 ("scripts/sign-file.c: Add support for signing with a raw signature") Signed-off-by: Yusong Gao Reviewed-by: Juerg Haefliger Signed-off-by: David Howells Link: https://lore.kernel.org/r/20231213024405.624692-1-a869920004@gmail.com/ # v5 Signed-off-by: Linus Torvalds --- scripts/sign-file.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/scripts/sign-file.c b/scripts/sign-file.c index 598ef5465f82..3edb156ae52c 100644 --- a/scripts/sign-file.c +++ b/scripts/sign-file.c @@ -322,7 +322,7 @@ int main(int argc, char **argv) CMS_NOSMIMECAP | use_keyid | use_signed_attrs), "CMS_add1_signer"); - ERR(CMS_final(cms, bm, NULL, CMS_NOCERTS | CMS_BINARY) < 0, + ERR(CMS_final(cms, bm, NULL, CMS_NOCERTS | CMS_BINARY) != 1, "CMS_final"); #else @@ -341,10 +341,10 @@ int main(int argc, char **argv) b = BIO_new_file(sig_file_name, "wb"); ERR(!b, "%s", sig_file_name); #ifndef USE_PKCS7 - ERR(i2d_CMS_bio_stream(b, cms, NULL, 0) < 0, + ERR(i2d_CMS_bio_stream(b, cms, NULL, 0) != 1, "%s", sig_file_name); #else - ERR(i2d_PKCS7_bio(b, pkcs7) < 0, + ERR(i2d_PKCS7_bio(b, pkcs7) != 1, "%s", sig_file_name); #endif BIO_free(b); @@ -374,9 +374,9 @@ int main(int argc, char **argv) if (!raw_sig) { #ifndef USE_PKCS7 - ERR(i2d_CMS_bio_stream(bd, cms, NULL, 0) < 0, "%s", dest_name); + ERR(i2d_CMS_bio_stream(bd, cms, NULL, 0) != 1, "%s", dest_name); #else - ERR(i2d_PKCS7_bio(bd, pkcs7) < 0, "%s", dest_name); + ERR(i2d_PKCS7_bio(bd, pkcs7) != 1, "%s", dest_name); #endif } else { BIO *b; @@ -396,7 +396,7 @@ int main(int argc, char **argv) ERR(BIO_write(bd, &sig_info, sizeof(sig_info)) < 0, "%s", dest_name); ERR(BIO_write(bd, magic_number, sizeof(magic_number) - 1) < 0, "%s", dest_name); - ERR(BIO_free(bd) < 0, "%s", dest_name); + ERR(BIO_free(bd) != 1, "%s", dest_name); /* Finally, if we're signing in place, replace the original. */ if (replace_orig) -- cgit v1.2.3 From ab4750332dbe535243def5dcebc24ca00c1f98ac Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 7 Dec 2023 10:14:41 -0500 Subject: drm/amdgpu/sdma5.2: add begin/end_use ring callbacks MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Add begin/end_use ring callbacks to disallow GFXOFF when SDMA work is submitted and allow it again afterward. This should avoid corner cases where GFXOFF is erroneously entered when SDMA is still active. For now just allow/disallow GFXOFF in the begin and end helpers until we root cause the issue. This should not impact power as SDMA usage is pretty minimal and GFXOSS should not be active when SDMA is active anyway, this just makes it explicit. v2: move everything into sdma5.2 code. No reason for this to be generic at this point. v3: Add comments in new code Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2220 Reviewed-by: Mario Limonciello (v1) Tested-by: Mario Limonciello (v1) Reviewed-by: Christian König Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org # 5.15+ --- drivers/gpu/drm/amd/amdgpu/sdma_v5_2.c | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+) diff --git a/drivers/gpu/drm/amd/amdgpu/sdma_v5_2.c b/drivers/gpu/drm/amd/amdgpu/sdma_v5_2.c index 83c240f741b5..0058f3f7cf6e 100644 --- a/drivers/gpu/drm/amd/amdgpu/sdma_v5_2.c +++ b/drivers/gpu/drm/amd/amdgpu/sdma_v5_2.c @@ -1643,6 +1643,32 @@ static void sdma_v5_2_get_clockgating_state(void *handle, u64 *flags) *flags |= AMD_CG_SUPPORT_SDMA_LS; } +static void sdma_v5_2_ring_begin_use(struct amdgpu_ring *ring) +{ + struct amdgpu_device *adev = ring->adev; + + /* SDMA 5.2.3 (RMB) FW doesn't seem to properly + * disallow GFXOFF in some cases leading to + * hangs in SDMA. Disallow GFXOFF while SDMA is active. + * We can probably just limit this to 5.2.3, + * but it shouldn't hurt for other parts since + * this GFXOFF will be disallowed anyway when SDMA is + * active, this just makes it explicit. + */ + amdgpu_gfx_off_ctrl(adev, false); +} + +static void sdma_v5_2_ring_end_use(struct amdgpu_ring *ring) +{ + struct amdgpu_device *adev = ring->adev; + + /* SDMA 5.2.3 (RMB) FW doesn't seem to properly + * disallow GFXOFF in some cases leading to + * hangs in SDMA. Allow GFXOFF when SDMA is complete. + */ + amdgpu_gfx_off_ctrl(adev, true); +} + const struct amd_ip_funcs sdma_v5_2_ip_funcs = { .name = "sdma_v5_2", .early_init = sdma_v5_2_early_init, @@ -1690,6 +1716,8 @@ static const struct amdgpu_ring_funcs sdma_v5_2_ring_funcs = { .test_ib = sdma_v5_2_ring_test_ib, .insert_nop = sdma_v5_2_ring_insert_nop, .pad_ib = sdma_v5_2_ring_pad_ib, + .begin_use = sdma_v5_2_ring_begin_use, + .end_use = sdma_v5_2_ring_end_use, .emit_wreg = sdma_v5_2_ring_emit_wreg, .emit_reg_wait = sdma_v5_2_ring_emit_reg_wait, .emit_reg_write_reg_wait = sdma_v5_2_ring_emit_reg_write_reg_wait, -- cgit v1.2.3 From 2c7300d357a213d4a4bda691d1d5c06251e552d0 Mon Sep 17 00:00:00 2001 From: Mario Limonciello Date: Tue, 12 Dec 2023 01:09:16 -0600 Subject: drm/amd: Fix a probing order problem on SDMA 2.4 commit 751e293f2c99 ("drm/amd: Move microcode init from sw_init to early_init for SDMA v2.4") made a fateful mistake in `adev->sdma.num_instances` wasn't declared when sdma_v2_4_init_microcode() was run. This caused probing to fail. Move the declaration to right before sdma_v2_4_init_microcode(). Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3043 Fixes: 751e293f2c99 ("drm/amd: Move microcode init from sw_init to early_init for SDMA v2.4") Reviewed-by: Alex Deucher Signed-off-by: Mario Limonciello Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/sdma_v2_4.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/amd/amdgpu/sdma_v2_4.c b/drivers/gpu/drm/amd/amdgpu/sdma_v2_4.c index 45377a175250..8d5d86675a7f 100644 --- a/drivers/gpu/drm/amd/amdgpu/sdma_v2_4.c +++ b/drivers/gpu/drm/amd/amdgpu/sdma_v2_4.c @@ -813,12 +813,12 @@ static int sdma_v2_4_early_init(void *handle) struct amdgpu_device *adev = (struct amdgpu_device *)handle; int r; + adev->sdma.num_instances = SDMA_MAX_INSTANCE; + r = sdma_v2_4_init_microcode(adev); if (r) return r; - adev->sdma.num_instances = SDMA_MAX_INSTANCE; - sdma_v2_4_set_ring_funcs(adev); sdma_v2_4_set_buffer_funcs(adev); sdma_v2_4_set_vm_pte_funcs(adev); -- cgit v1.2.3 From ceb9a321e7639700844aa3bf234a4e0884f13b77 Mon Sep 17 00:00:00 2001 From: Christian König Date: Fri, 8 Dec 2023 13:43:09 +0100 Subject: drm/amdgpu: fix tear down order in amdgpu_vm_pt_free MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit When freeing PD/PT with shadows it can happen that the shadow destruction races with detaching the PD/PT from the VM causing a NULL pointer dereference in the invalidation code. Fix this by detaching the the PD/PT from the VM first and then freeing the shadow instead. Signed-off-by: Christian König Fixes: https://gitlab.freedesktop.org/drm/amd/-/issues/2867 Cc: Reviewed-by: Alex Deucher Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu_vm_pt.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_vm_pt.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_vm_pt.c index a2287bb25223..a160265ddc07 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_vm_pt.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_vm_pt.c @@ -642,13 +642,14 @@ static void amdgpu_vm_pt_free(struct amdgpu_vm_bo_base *entry) if (!entry->bo) return; + + entry->bo->vm_bo = NULL; shadow = amdgpu_bo_shadowed(entry->bo); if (shadow) { ttm_bo_set_bulk_move(&shadow->tbo, NULL); amdgpu_bo_unref(&shadow); } ttm_bo_set_bulk_move(&entry->bo->tbo, NULL); - entry->bo->vm_bo = NULL; spin_lock(&entry->vm->status_lock); list_del(&entry->vm_status); -- cgit v1.2.3 From a4236c4b410857a70647c410e886c8a0455ec4fb Mon Sep 17 00:00:00 2001 From: Christian König Date: Mon, 4 Dec 2023 15:51:50 +0100 Subject: drm/amdgpu: warn when there are still mappings when a BO is destroyed v2 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This can only happen when there is a reference counting bug. v2: fix typo Signed-off-by: Christian König Reviewed-by: Alex Deucher Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu_object.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_object.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_object.c index d79b4ca1ecfc..5ad03f2afdb4 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_object.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_object.c @@ -1343,6 +1343,8 @@ void amdgpu_bo_release_notify(struct ttm_buffer_object *bo) abo = ttm_to_amdgpu_bo(bo); + WARN_ON(abo->vm_bo); + if (abo->kfd_bo) amdgpu_amdkfd_release_notify(abo); -- cgit v1.2.3 From 60316d7f10b17a7ebb1ead0642fee8710e1560e0 Mon Sep 17 00:00:00 2001 From: Nikolay Kuratov Date: Mon, 11 Dec 2023 19:23:17 +0300 Subject: vsock/virtio: Fix unsigned integer wrap around in virtio_transport_has_space() We need to do signed arithmetic if we expect condition `if (bytes < 0)` to be possible Found by Linux Verification Center (linuxtesting.org) with SVACE Fixes: 06a8fc78367d ("VSOCK: Introduce virtio_vsock_common.ko") Signed-off-by: Nikolay Kuratov Reviewed-by: Stefano Garzarella Link: https://lore.kernel.org/r/20231211162317.4116625-1-kniv@yandex-team.ru Signed-off-by: Jakub Kicinski --- net/vmw_vsock/virtio_transport_common.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/vmw_vsock/virtio_transport_common.c b/net/vmw_vsock/virtio_transport_common.c index c8e162c9d1df..6df246b53260 100644 --- a/net/vmw_vsock/virtio_transport_common.c +++ b/net/vmw_vsock/virtio_transport_common.c @@ -843,7 +843,7 @@ static s64 virtio_transport_has_space(struct vsock_sock *vsk) struct virtio_vsock_sock *vvs = vsk->trans; s64 bytes; - bytes = vvs->peer_buf_alloc - (vvs->tx_cnt - vvs->peer_fwd_cnt); + bytes = (s64)vvs->peer_buf_alloc - (vvs->tx_cnt - vvs->peer_fwd_cnt); if (bytes < 0) bytes = 0; -- cgit v1.2.3 From 23d05d563b7e7b0314e65c8e882bc27eac2da8e7 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Tue, 12 Dec 2023 16:46:21 +0000 Subject: net: prevent mss overflow in skb_segment() Once again syzbot is able to crash the kernel in skb_segment() [1] GSO_BY_FRAGS is a forbidden value, but unfortunately the following computation in skb_segment() can reach it quite easily : mss = mss * partial_segs; 65535 = 3 * 5 * 17 * 257, so many initial values of mss can lead to a bad final result. Make sure to limit segmentation so that the new mss value is smaller than GSO_BY_FRAGS. [1] general protection fault, probably for non-canonical address 0xdffffc000000000e: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000070-0x0000000000000077] CPU: 1 PID: 5079 Comm: syz-executor993 Not tainted 6.7.0-rc4-syzkaller-00141-g1ae4cd3cbdd0 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/10/2023 RIP: 0010:skb_segment+0x181d/0x3f30 net/core/skbuff.c:4551 Code: 83 e3 02 e9 fb ed ff ff e8 90 68 1c f9 48 8b 84 24 f8 00 00 00 48 8d 78 70 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <0f> b6 04 02 84 c0 74 08 3c 03 0f 8e 8a 21 00 00 48 8b 84 24 f8 00 RSP: 0018:ffffc900043473d0 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: 0000000000010046 RCX: ffffffff886b1597 RDX: 000000000000000e RSI: ffffffff886b2520 RDI: 0000000000000070 RBP: ffffc90004347578 R08: 0000000000000005 R09: 000000000000ffff R10: 000000000000ffff R11: 0000000000000002 R12: ffff888063202ac0 R13: 0000000000010000 R14: 000000000000ffff R15: 0000000000000046 FS: 0000555556e7e380(0000) GS:ffff8880b9900000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020010000 CR3: 0000000027ee2000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: udp6_ufo_fragment+0xa0e/0xd00 net/ipv6/udp_offload.c:109 ipv6_gso_segment+0x534/0x17e0 net/ipv6/ip6_offload.c:120 skb_mac_gso_segment+0x290/0x610 net/core/gso.c:53 __skb_gso_segment+0x339/0x710 net/core/gso.c:124 skb_gso_segment include/net/gso.h:83 [inline] validate_xmit_skb+0x36c/0xeb0 net/core/dev.c:3626 __dev_queue_xmit+0x6f3/0x3d60 net/core/dev.c:4338 dev_queue_xmit include/linux/netdevice.h:3134 [inline] packet_xmit+0x257/0x380 net/packet/af_packet.c:276 packet_snd net/packet/af_packet.c:3087 [inline] packet_sendmsg+0x24c6/0x5220 net/packet/af_packet.c:3119 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0xd5/0x180 net/socket.c:745 __sys_sendto+0x255/0x340 net/socket.c:2190 __do_sys_sendto net/socket.c:2202 [inline] __se_sys_sendto net/socket.c:2198 [inline] __x64_sys_sendto+0xe0/0x1b0 net/socket.c:2198 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0x40/0x110 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x63/0x6b RIP: 0033:0x7f8692032aa9 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 d1 19 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fff8d685418 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007f8692032aa9 RDX: 0000000000010048 RSI: 00000000200000c0 RDI: 0000000000000003 RBP: 00000000000f4240 R08: 0000000020000540 R09: 0000000000000014 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fff8d685480 R13: 0000000000000001 R14: 00007fff8d685480 R15: 0000000000000003 Modules linked in: ---[ end trace 0000000000000000 ]--- RIP: 0010:skb_segment+0x181d/0x3f30 net/core/skbuff.c:4551 Code: 83 e3 02 e9 fb ed ff ff e8 90 68 1c f9 48 8b 84 24 f8 00 00 00 48 8d 78 70 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <0f> b6 04 02 84 c0 74 08 3c 03 0f 8e 8a 21 00 00 48 8b 84 24 f8 00 RSP: 0018:ffffc900043473d0 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: 0000000000010046 RCX: ffffffff886b1597 RDX: 000000000000000e RSI: ffffffff886b2520 RDI: 0000000000000070 RBP: ffffc90004347578 R08: 0000000000000005 R09: 000000000000ffff R10: 000000000000ffff R11: 0000000000000002 R12: ffff888063202ac0 R13: 0000000000010000 R14: 000000000000ffff R15: 0000000000000046 FS: 0000555556e7e380(0000) GS:ffff8880b9900000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020010000 CR3: 0000000027ee2000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Fixes: 3953c46c3ac7 ("sk_buff: allow segmenting based on frag sizes") Signed-off-by: Eric Dumazet Cc: Marcelo Ricardo Leitner Reviewed-by: Willem de Bruijn Link: https://lore.kernel.org/r/20231212164621.4131800-1-edumazet@google.com Signed-off-by: Jakub Kicinski --- net/core/skbuff.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/net/core/skbuff.c b/net/core/skbuff.c index b157efea5dea..83af8aaeb893 100644 --- a/net/core/skbuff.c +++ b/net/core/skbuff.c @@ -4522,8 +4522,9 @@ struct sk_buff *skb_segment(struct sk_buff *head_skb, /* GSO partial only requires that we trim off any excess that * doesn't fit into an MSS sized block, so take care of that * now. + * Cap len to not accidentally hit GSO_BY_FRAGS. */ - partial_segs = len / mss; + partial_segs = min(len, GSO_BY_FRAGS - 1) / mss; if (partial_segs > 1) mss *= partial_segs; else -- cgit v1.2.3 From 2aad7d4189a923b24efa8ea6ad09059882b1bfe4 Mon Sep 17 00:00:00 2001 From: Ioana Ciornei Date: Tue, 12 Dec 2023 18:43:25 +0200 Subject: dpaa2-switch: fix size of the dma_unmap The size of the DMA unmap was wrongly put as a sizeof of a pointer. Change the value of the DMA unmap to be the actual macro used for the allocation and the DMA map. Fixes: 1110318d83e8 ("dpaa2-switch: add tc flower hardware offload on ingress traffic") Signed-off-by: Ioana Ciornei Link: https://lore.kernel.org/r/20231212164326.2753457-2-ioana.ciornei@nxp.com Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/freescale/dpaa2/dpaa2-switch-flower.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/net/ethernet/freescale/dpaa2/dpaa2-switch-flower.c b/drivers/net/ethernet/freescale/dpaa2/dpaa2-switch-flower.c index 4798fb7fe35d..b6a534a3e0b1 100644 --- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-switch-flower.c +++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-switch-flower.c @@ -139,7 +139,8 @@ int dpaa2_switch_acl_entry_add(struct dpaa2_switch_filter_block *filter_block, err = dpsw_acl_add_entry(ethsw->mc_io, 0, ethsw->dpsw_handle, filter_block->acl_id, acl_entry_cfg); - dma_unmap_single(dev, acl_entry_cfg->key_iova, sizeof(cmd_buff), + dma_unmap_single(dev, acl_entry_cfg->key_iova, + DPAA2_ETHSW_PORT_ACL_CMD_BUF_SIZE, DMA_TO_DEVICE); if (err) { dev_err(dev, "dpsw_acl_add_entry() failed %d\n", err); @@ -181,8 +182,8 @@ dpaa2_switch_acl_entry_remove(struct dpaa2_switch_filter_block *block, err = dpsw_acl_remove_entry(ethsw->mc_io, 0, ethsw->dpsw_handle, block->acl_id, acl_entry_cfg); - dma_unmap_single(dev, acl_entry_cfg->key_iova, sizeof(cmd_buff), - DMA_TO_DEVICE); + dma_unmap_single(dev, acl_entry_cfg->key_iova, + DPAA2_ETHSW_PORT_ACL_CMD_BUF_SIZE, DMA_TO_DEVICE); if (err) { dev_err(dev, "dpsw_acl_remove_entry() failed %d\n", err); kfree(cmd_buff); -- cgit v1.2.3 From f24a49a375f65e8e75ee1b19d806f46dbaae57fd Mon Sep 17 00:00:00 2001 From: Ioana Ciornei Date: Tue, 12 Dec 2023 18:43:26 +0200 Subject: dpaa2-switch: do not ask for MDB, VLAN and FDB replay Starting with commit 4e51bf44a03a ("net: bridge: move the switchdev object replay helpers to "push" mode") the switchdev_bridge_port_offload() helper was extended with the intention to provide switchdev drivers easy access to object addition and deletion replays. This works by calling the replay helpers with non-NULL notifier blocks. In the same commit, the dpaa2-switch driver was updated so that it passes valid notifier blocks to the helper. At that moment, no regression was identified through testing. In the meantime, the blamed commit changed the behavior in terms of which ports get hit by the replay. Before this commit, only the initial port which identified itself as offloaded through switchdev_bridge_port_offload() got a replay of all port objects and FDBs. After this, the newly joining port will trigger a replay of objects on all bridge ports and on the bridge itself. This behavior leads to errors in dpaa2_switch_port_vlans_add() when a VLAN gets installed on the same interface multiple times. The intended mechanism to address this is to pass a non-NULL ctx to the switchdev_bridge_port_offload() helper and then check it against the port's private structure. But since the driver does not have any use for the replayed port objects and FDBs until it gains support for LAG offload, it's better to fix the issue by reverting the dpaa2-switch driver to not ask for replay. The pointers will be added back when we are prepared to ignore replays on unrelated ports. Fixes: b28d580e2939 ("net: bridge: switchdev: replay all VLAN groups") Signed-off-by: Ioana Ciornei Link: https://lore.kernel.org/r/20231212164326.2753457-3-ioana.ciornei@nxp.com Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/freescale/dpaa2/dpaa2-switch.c | 11 ++--------- 1 file changed, 2 insertions(+), 9 deletions(-) diff --git a/drivers/net/ethernet/freescale/dpaa2/dpaa2-switch.c b/drivers/net/ethernet/freescale/dpaa2/dpaa2-switch.c index 97d3151076d5..e01a246124ac 100644 --- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-switch.c +++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-switch.c @@ -1998,9 +1998,6 @@ static int dpaa2_switch_port_attr_set_event(struct net_device *netdev, return notifier_from_errno(err); } -static struct notifier_block dpaa2_switch_port_switchdev_nb; -static struct notifier_block dpaa2_switch_port_switchdev_blocking_nb; - static int dpaa2_switch_port_bridge_join(struct net_device *netdev, struct net_device *upper_dev, struct netlink_ext_ack *extack) @@ -2043,9 +2040,7 @@ static int dpaa2_switch_port_bridge_join(struct net_device *netdev, goto err_egress_flood; err = switchdev_bridge_port_offload(netdev, netdev, NULL, - &dpaa2_switch_port_switchdev_nb, - &dpaa2_switch_port_switchdev_blocking_nb, - false, extack); + NULL, NULL, false, extack); if (err) goto err_switchdev_offload; @@ -2079,9 +2074,7 @@ static int dpaa2_switch_port_restore_rxvlan(struct net_device *vdev, int vid, vo static void dpaa2_switch_port_pre_bridge_leave(struct net_device *netdev) { - switchdev_bridge_port_unoffload(netdev, NULL, - &dpaa2_switch_port_switchdev_nb, - &dpaa2_switch_port_switchdev_blocking_nb); + switchdev_bridge_port_unoffload(netdev, NULL, NULL, NULL); } static int dpaa2_switch_port_bridge_leave(struct net_device *netdev) -- cgit v1.2.3 From 1cc111b9cddc71ce161cd388f11f0e9048edffdb Mon Sep 17 00:00:00 2001 From: Zheng Yejian Date: Thu, 14 Dec 2023 09:21:53 +0800 Subject: tracing: Fix uaf issue when open the hist or hist_debug file KASAN report following issue. The root cause is when opening 'hist' file of an instance and accessing 'trace_event_file' in hist_show(), but 'trace_event_file' has been freed due to the instance being removed. 'hist_debug' file has the same problem. To fix it, call tracing_{open,release}_file_tr() in file_operations callback to have the ref count and avoid 'trace_event_file' being freed. BUG: KASAN: slab-use-after-free in hist_show+0x11e0/0x1278 Read of size 8 at addr ffff242541e336b8 by task head/190 CPU: 4 PID: 190 Comm: head Not tainted 6.7.0-rc5-g26aff849438c #133 Hardware name: linux,dummy-virt (DT) Call trace: dump_backtrace+0x98/0xf8 show_stack+0x1c/0x30 dump_stack_lvl+0x44/0x58 print_report+0xf0/0x5a0 kasan_report+0x80/0xc0 __asan_report_load8_noabort+0x1c/0x28 hist_show+0x11e0/0x1278 seq_read_iter+0x344/0xd78 seq_read+0x128/0x1c0 vfs_read+0x198/0x6c8 ksys_read+0xf4/0x1e0 __arm64_sys_read+0x70/0xa8 invoke_syscall+0x70/0x260 el0_svc_common.constprop.0+0xb0/0x280 do_el0_svc+0x44/0x60 el0_svc+0x34/0x68 el0t_64_sync_handler+0xb8/0xc0 el0t_64_sync+0x168/0x170 Allocated by task 188: kasan_save_stack+0x28/0x50 kasan_set_track+0x28/0x38 kasan_save_alloc_info+0x20/0x30 __kasan_slab_alloc+0x6c/0x80 kmem_cache_alloc+0x15c/0x4a8 trace_create_new_event+0x84/0x348 __trace_add_new_event+0x18/0x88 event_trace_add_tracer+0xc4/0x1a0 trace_array_create_dir+0x6c/0x100 trace_array_create+0x2e8/0x568 instance_mkdir+0x48/0x80 tracefs_syscall_mkdir+0x90/0xe8 vfs_mkdir+0x3c4/0x610 do_mkdirat+0x144/0x200 __arm64_sys_mkdirat+0x8c/0xc0 invoke_syscall+0x70/0x260 el0_svc_common.constprop.0+0xb0/0x280 do_el0_svc+0x44/0x60 el0_svc+0x34/0x68 el0t_64_sync_handler+0xb8/0xc0 el0t_64_sync+0x168/0x170 Freed by task 191: kasan_save_stack+0x28/0x50 kasan_set_track+0x28/0x38 kasan_save_free_info+0x34/0x58 __kasan_slab_free+0xe4/0x158 kmem_cache_free+0x19c/0x508 event_file_put+0xa0/0x120 remove_event_file_dir+0x180/0x320 event_trace_del_tracer+0xb0/0x180 __remove_instance+0x224/0x508 instance_rmdir+0x44/0x78 tracefs_syscall_rmdir+0xbc/0x140 vfs_rmdir+0x1cc/0x4c8 do_rmdir+0x220/0x2b8 __arm64_sys_unlinkat+0xc0/0x100 invoke_syscall+0x70/0x260 el0_svc_common.constprop.0+0xb0/0x280 do_el0_svc+0x44/0x60 el0_svc+0x34/0x68 el0t_64_sync_handler+0xb8/0xc0 el0t_64_sync+0x168/0x170 Link: https://lore.kernel.org/linux-trace-kernel/20231214012153.676155-1-zhengyejian1@huawei.com Suggested-by: Steven Rostedt Signed-off-by: Zheng Yejian Signed-off-by: Steven Rostedt (Google) --- kernel/trace/trace.c | 6 ++++++ kernel/trace/trace.h | 1 + kernel/trace/trace_events_hist.c | 12 ++++++++---- 3 files changed, 15 insertions(+), 4 deletions(-) diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index 6c79548f9574..199df497db07 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -4968,6 +4968,12 @@ int tracing_release_file_tr(struct inode *inode, struct file *filp) return 0; } +int tracing_single_release_file_tr(struct inode *inode, struct file *filp) +{ + tracing_release_file_tr(inode, filp); + return single_release(inode, filp); +} + static int tracing_mark_open(struct inode *inode, struct file *filp) { stream_open(inode, filp); diff --git a/kernel/trace/trace.h b/kernel/trace/trace.h index b7f4ea25a194..0489e72c8169 100644 --- a/kernel/trace/trace.h +++ b/kernel/trace/trace.h @@ -617,6 +617,7 @@ int tracing_open_generic(struct inode *inode, struct file *filp); int tracing_open_generic_tr(struct inode *inode, struct file *filp); int tracing_open_file_tr(struct inode *inode, struct file *filp); int tracing_release_file_tr(struct inode *inode, struct file *filp); +int tracing_single_release_file_tr(struct inode *inode, struct file *filp); bool tracing_is_disabled(void); bool tracer_tracing_is_on(struct trace_array *tr); void tracer_tracing_on(struct trace_array *tr); diff --git a/kernel/trace/trace_events_hist.c b/kernel/trace/trace_events_hist.c index 1abc07fba1b9..5ecf3c8bde20 100644 --- a/kernel/trace/trace_events_hist.c +++ b/kernel/trace/trace_events_hist.c @@ -5623,10 +5623,12 @@ static int event_hist_open(struct inode *inode, struct file *file) { int ret; - ret = security_locked_down(LOCKDOWN_TRACEFS); + ret = tracing_open_file_tr(inode, file); if (ret) return ret; + /* Clear private_data to avoid warning in single_open() */ + file->private_data = NULL; return single_open(file, hist_show, file); } @@ -5634,7 +5636,7 @@ const struct file_operations event_hist_fops = { .open = event_hist_open, .read = seq_read, .llseek = seq_lseek, - .release = single_release, + .release = tracing_single_release_file_tr, }; #ifdef CONFIG_HIST_TRIGGERS_DEBUG @@ -5900,10 +5902,12 @@ static int event_hist_debug_open(struct inode *inode, struct file *file) { int ret; - ret = security_locked_down(LOCKDOWN_TRACEFS); + ret = tracing_open_file_tr(inode, file); if (ret) return ret; + /* Clear private_data to avoid warning in single_open() */ + file->private_data = NULL; return single_open(file, hist_debug_show, file); } @@ -5911,7 +5915,7 @@ const struct file_operations event_hist_debug_fops = { .open = event_hist_debug_open, .read = seq_read, .llseek = seq_lseek, - .release = single_release, + .release = tracing_single_release_file_tr, }; #endif -- cgit v1.2.3 From 981d947bcd382c3950a593690e0e13d194d65b1c Mon Sep 17 00:00:00 2001 From: Sneh Shah Date: Tue, 12 Dec 2023 14:52:08 +0530 Subject: net: stmmac: dwmac-qcom-ethqos: Fix drops in 10M SGMII RX In 10M SGMII mode all the packets are being dropped due to wrong Rx clock. SGMII 10MBPS mode needs RX clock divider programmed to avoid drops in Rx. Update configure SGMII function with Rx clk divider programming. Fixes: 463120c31c58 ("net: stmmac: dwmac-qcom-ethqos: add support for SGMII") Tested-by: Andrew Halaney Signed-off-by: Sneh Shah Reviewed-by: Bjorn Andersson Link: https://lore.kernel.org/r/20231212092208.22393-1-quic_snehshah@quicinc.com Signed-off-by: Paolo Abeni --- drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c index d3bf42d0fceb..31631e3f89d0 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c @@ -34,6 +34,7 @@ #define RGMII_CONFIG_LOOPBACK_EN BIT(2) #define RGMII_CONFIG_PROG_SWAP BIT(1) #define RGMII_CONFIG_DDR_MODE BIT(0) +#define RGMII_CONFIG_SGMII_CLK_DVDR GENMASK(18, 10) /* SDCC_HC_REG_DLL_CONFIG fields */ #define SDCC_DLL_CONFIG_DLL_RST BIT(30) @@ -78,6 +79,8 @@ #define ETHQOS_MAC_CTRL_SPEED_MODE BIT(14) #define ETHQOS_MAC_CTRL_PORT_SEL BIT(15) +#define SGMII_10M_RX_CLK_DVDR 0x31 + struct ethqos_emac_por { unsigned int offset; unsigned int value; @@ -598,6 +601,9 @@ static int ethqos_configure_rgmii(struct qcom_ethqos *ethqos) return 0; } +/* On interface toggle MAC registers gets reset. + * Configure MAC block for SGMII on ethernet phy link up + */ static int ethqos_configure_sgmii(struct qcom_ethqos *ethqos) { int val; @@ -617,6 +623,10 @@ static int ethqos_configure_sgmii(struct qcom_ethqos *ethqos) case SPEED_10: val |= ETHQOS_MAC_CTRL_PORT_SEL; val &= ~ETHQOS_MAC_CTRL_SPEED_MODE; + rgmii_updatel(ethqos, RGMII_CONFIG_SGMII_CLK_DVDR, + FIELD_PREP(RGMII_CONFIG_SGMII_CLK_DVDR, + SGMII_10M_RX_CLK_DVDR), + RGMII_IO_MACRO_CONFIG); break; } -- cgit v1.2.3 From e23c0d21ce9234fbc31ece35663ababbb83f9347 Mon Sep 17 00:00:00 2001 From: Andrew Halaney Date: Tue, 12 Dec 2023 16:18:33 -0600 Subject: net: stmmac: Handle disabled MDIO busses from devicetree Many hardware configurations have the MDIO bus disabled, and are instead using some other MDIO bus to talk to the MAC's phy. of_mdiobus_register() returns -ENODEV in this case. Let's handle it gracefully instead of failing to probe the MAC. Fixes: 47dd7a540b8a ("net: add support for STMicroelectronics Ethernet controllers.") Signed-off-by: Andrew Halaney Reviewed-by: Serge Semin Link: https://lore.kernel.org/r/20231212-b4-stmmac-handle-mdio-enodev-v2-1-600171acf79f@redhat.com Signed-off-by: Paolo Abeni --- drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c index fa9e7e7040b9..0542cfd1817e 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c @@ -591,7 +591,11 @@ int stmmac_mdio_register(struct net_device *ndev) new_bus->parent = priv->device; err = of_mdiobus_register(new_bus, mdio_node); - if (err != 0) { + if (err == -ENODEV) { + err = 0; + dev_info(dev, "MDIO bus is disabled\n"); + goto bus_register_fail; + } else if (err) { dev_err_probe(dev, err, "Cannot register the MDIO bus\n"); goto bus_register_fail; } -- cgit v1.2.3 From 189ff16722ee36ced4d2a2469d4ab65a8fee4198 Mon Sep 17 00:00:00 2001 From: Hyunwoo Kim Date: Tue, 12 Dec 2023 23:10:56 -0500 Subject: appletalk: Fix Use-After-Free in atalk_ioctl Because atalk_ioctl() accesses sk->sk_receive_queue without holding a sk->sk_receive_queue.lock, it can cause a race with atalk_recvmsg(). A use-after-free for skb occurs with the following flow. ``` atalk_ioctl() -> skb_peek() atalk_recvmsg() -> skb_recv_datagram() -> skb_free_datagram() ``` Add sk->sk_receive_queue.lock to atalk_ioctl() to fix this issue. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Hyunwoo Kim Link: https://lore.kernel.org/r/20231213041056.GA519680@v4bel-B760M-AORUS-ELITE-AX Signed-off-by: Paolo Abeni --- net/appletalk/ddp.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) diff --git a/net/appletalk/ddp.c b/net/appletalk/ddp.c index 9ba04a69ec2a..a852ec093fa8 100644 --- a/net/appletalk/ddp.c +++ b/net/appletalk/ddp.c @@ -1775,15 +1775,14 @@ static int atalk_ioctl(struct socket *sock, unsigned int cmd, unsigned long arg) break; } case TIOCINQ: { - /* - * These two are safe on a single CPU system as only - * user tasks fiddle here - */ - struct sk_buff *skb = skb_peek(&sk->sk_receive_queue); + struct sk_buff *skb; long amount = 0; + spin_lock_irq(&sk->sk_receive_queue.lock); + skb = skb_peek(&sk->sk_receive_queue); if (skb) amount = skb->len - sizeof(struct ddpehdr); + spin_unlock_irq(&sk->sk_receive_queue.lock); rc = put_user(amount, (int __user *)argp); break; } -- cgit v1.2.3 From 6c6fa2641402e8e753262fb61ed9a15a7cb225ad Mon Sep 17 00:00:00 2001 From: Gergo Koteles Date: Thu, 14 Dec 2023 00:28:16 +0100 Subject: ALSA: hda/tas2781: call cleanup functions only once If the module can load the RCA but not the firmware binary, it will call the cleanup functions. Then unloading the module causes general protection fault due to double free. Do not call the cleanup functions in tasdev_fw_ready. general protection fault, probably for non-canonical address 0x6f2b8a2bff4c8fec: 0000 [#1] PREEMPT SMP NOPTI Call Trace: ? die_addr+0x36/0x90 ? exc_general_protection+0x1c5/0x430 ? asm_exc_general_protection+0x26/0x30 ? tasdevice_config_info_remove+0x6d/0xd0 [snd_soc_tas2781_fmwlib] tas2781_hda_unbind+0xaa/0x100 [snd_hda_scodec_tas2781_i2c] component_unbind+0x2e/0x50 component_unbind_all+0x92/0xa0 component_del+0xa8/0x140 tas2781_hda_remove.isra.0+0x32/0x60 [snd_hda_scodec_tas2781_i2c] i2c_device_remove+0x26/0xb0 Fixes: 5be27f1e3ec9 ("ALSA: hda/tas2781: Add tas2781 HDA driver") CC: stable@vger.kernel.org Signed-off-by: Gergo Koteles Link: https://lore.kernel.org/r/1a0885c424bb21172702d254655882b59ef6477a.1702510018.git.soyer@irl.hu Signed-off-by: Takashi Iwai --- sound/pci/hda/tas2781_hda_i2c.c | 5 ----- 1 file changed, 5 deletions(-) diff --git a/sound/pci/hda/tas2781_hda_i2c.c b/sound/pci/hda/tas2781_hda_i2c.c index d3dafc9d150b..c8ee5f809c38 100644 --- a/sound/pci/hda/tas2781_hda_i2c.c +++ b/sound/pci/hda/tas2781_hda_i2c.c @@ -550,11 +550,6 @@ static void tasdev_fw_ready(const struct firmware *fmw, void *context) tas2781_save_calibration(tas_priv); out: - if (tas_priv->fw_state == TASDEVICE_DSP_FW_FAIL) { - /*If DSP FW fail, kcontrol won't be created */ - tasdevice_config_info_remove(tas_priv); - tasdevice_dsp_remove(tas_priv); - } mutex_unlock(&tas_priv->codec_lock); if (fmw) release_firmware(fmw); -- cgit v1.2.3 From 315deab289924c83ab1ded50022e8db95d6e428b Mon Sep 17 00:00:00 2001 From: Gergo Koteles Date: Thu, 14 Dec 2023 00:49:20 +0100 Subject: ALSA: hda/tas2781: reset the amp before component_add Calling component_add starts loading the firmware, the callback function writes the program to the amplifiers. If the module resets the amplifiers after component_add, it happens that one of the amplifiers does not work because the reset and program writing are interleaving. Call tas2781_reset before component_add to ensure reliable initialization. Fixes: 5be27f1e3ec9 ("ALSA: hda/tas2781: Add tas2781 HDA driver") CC: stable@vger.kernel.org Signed-off-by: Gergo Koteles Link: https://lore.kernel.org/r/4d23bf58558e23ee8097de01f70f1eb8d9de2d15.1702511246.git.soyer@irl.hu Signed-off-by: Takashi Iwai --- sound/pci/hda/tas2781_hda_i2c.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/pci/hda/tas2781_hda_i2c.c b/sound/pci/hda/tas2781_hda_i2c.c index c8ee5f809c38..63a90c7e8976 100644 --- a/sound/pci/hda/tas2781_hda_i2c.c +++ b/sound/pci/hda/tas2781_hda_i2c.c @@ -674,14 +674,14 @@ static int tas2781_hda_i2c_probe(struct i2c_client *clt) pm_runtime_put_autosuspend(tas_priv->dev); + tas2781_reset(tas_priv); + ret = component_add(tas_priv->dev, &tas2781_hda_comp_ops); if (ret) { dev_err(tas_priv->dev, "Register component failed: %d\n", ret); pm_runtime_disable(tas_priv->dev); - goto err; } - tas2781_reset(tas_priv); err: if (ret) tas2781_hda_remove(&clt->dev); -- cgit v1.2.3 From 7bb26ea74aa86fdf894b7dbd8c5712c5b4187da7 Mon Sep 17 00:00:00 2001 From: Igor Russkikh Date: Wed, 13 Dec 2023 10:40:44 +0100 Subject: net: atlantic: fix double free in ring reinit logic Driver has a logic leak in ring data allocation/free, where double free may happen in aq_ring_free if system is under stress and driver init/deinit is happening. The probability is higher to get this during suspend/resume cycle. Verification was done simulating same conditions with stress -m 2000 --vm-bytes 20M --vm-hang 10 --backoff 1000 while true; do sudo ifconfig enp1s0 down; sudo ifconfig enp1s0 up; done Fixed by explicitly clearing pointers to NULL on deallocation Fixes: 018423e90bee ("net: ethernet: aquantia: Add ring support code") Reported-by: Linus Torvalds Closes: https://lore.kernel.org/netdev/CAHk-=wiZZi7FcvqVSUirHBjx0bBUZ4dFrMDVLc3+3HCrtq0rBA@mail.gmail.com/ Signed-off-by: Igor Russkikh Link: https://lore.kernel.org/r/20231213094044.22988-1-irusskikh@marvell.com Signed-off-by: Paolo Abeni --- drivers/net/ethernet/aquantia/atlantic/aq_ring.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/aquantia/atlantic/aq_ring.c b/drivers/net/ethernet/aquantia/atlantic/aq_ring.c index 694daeaf3e61..e1885c1eb100 100644 --- a/drivers/net/ethernet/aquantia/atlantic/aq_ring.c +++ b/drivers/net/ethernet/aquantia/atlantic/aq_ring.c @@ -938,11 +938,14 @@ void aq_ring_free(struct aq_ring_s *self) return; kfree(self->buff_ring); + self->buff_ring = NULL; - if (self->dx_ring) + if (self->dx_ring) { dma_free_coherent(aq_nic_get_dev(self->aq_nic), self->size * self->dx_size, self->dx_ring, self->dx_ring_pa); + self->dx_ring = NULL; + } } unsigned int aq_ring_fill_stats_data(struct aq_ring_s *self, u64 *data) -- cgit v1.2.3 From 1ba0e9d69b2000e95267c888cbfa91d823388d47 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Thu, 14 Dec 2023 21:34:08 +0000 Subject: io_uring/cmd: fix breakage in SOCKET_URING_OP_SIOC* implementation In 8e9fad0e70b7 "io_uring: Add io_uring command support for sockets" you've got an include of asm-generic/ioctls.h done in io_uring/uring_cmd.c. That had been done for the sake of this chunk - + ret = prot->ioctl(sk, SIOCINQ, &arg); + if (ret) + return ret; + return arg; + case SOCKET_URING_OP_SIOCOUTQ: + ret = prot->ioctl(sk, SIOCOUTQ, &arg); SIOC{IN,OUT}Q are defined to symbols (FIONREAD and TIOCOUTQ) that come from ioctls.h, all right, but the values vary by the architecture. FIONREAD is 0x467F on mips 0x4004667F on alpha, powerpc and sparc 0x8004667F on sh and xtensa 0x541B everywhere else TIOCOUTQ is 0x7472 on mips 0x40047473 on alpha, powerpc and sparc 0x80047473 on sh and xtensa 0x5411 everywhere else ->ioctl() expects the same values it would've gotten from userland; all places where we compare with SIOC{IN,OUT}Q are using asm/ioctls.h, so they pick the correct values. io_uring_cmd_sock(), OTOH, ends up passing the default ones. Fixes: 8e9fad0e70b7 ("io_uring: Add io_uring command support for sockets") Cc: Signed-off-by: Al Viro Link: https://lore.kernel.org/r/20231214213408.GT1674809@ZenIV Signed-off-by: Jens Axboe --- io_uring/uring_cmd.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/io_uring/uring_cmd.c b/io_uring/uring_cmd.c index acbc2924ecd2..7d3ef62e620a 100644 --- a/io_uring/uring_cmd.c +++ b/io_uring/uring_cmd.c @@ -7,7 +7,7 @@ #include #include -#include +#include #include "io_uring.h" #include "rsrc.h" -- cgit v1.2.3 From 46dec61643d7047c9b5929f98a2b7fa4fa93a7dc Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Fri, 8 Dec 2023 11:46:53 +0100 Subject: drm/nouveau: Fixup gk20a instobj hierarchy Commit 12c9b05da918 ("drm/nouveau/imem: support allocations not preserved across suspend") uses container_of() to cast from struct nvkm_memory to struct nvkm_instobj, assuming that all instance objects are derived from struct nvkm_instobj. For the gk20a family that's not the case and they are derived from struct nvkm_memory instead. This causes some subtle data corruption (nvkm_instobj.preserve ends up mapping to gk20a_instobj.vaddr) that causes a NULL pointer dereference in gk20a_instobj_acquire_iommu() (and possibly elsewhere) and also prevents suspend/resume from working. Fix this by making struct gk20a_instobj derive from struct nvkm_instobj instead. Fixes: 12c9b05da918 ("drm/nouveau/imem: support allocations not preserved across suspend") Reported-by: Jonathan Hunter Signed-off-by: Thierry Reding Tested-by: Jon Hunter Signed-off-by: Dave Airlie Link: https://patchwork.freedesktop.org/patch/msgid/20231208104653.1917055-1-thierry.reding@gmail.com --- drivers/gpu/drm/nouveau/nvkm/subdev/instmem/gk20a.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) diff --git a/drivers/gpu/drm/nouveau/nvkm/subdev/instmem/gk20a.c b/drivers/gpu/drm/nouveau/nvkm/subdev/instmem/gk20a.c index 1b811d6972a1..201022ae9214 100644 --- a/drivers/gpu/drm/nouveau/nvkm/subdev/instmem/gk20a.c +++ b/drivers/gpu/drm/nouveau/nvkm/subdev/instmem/gk20a.c @@ -49,14 +49,14 @@ #include struct gk20a_instobj { - struct nvkm_memory memory; + struct nvkm_instobj base; struct nvkm_mm_node *mn; struct gk20a_instmem *imem; /* CPU mapping */ u32 *vaddr; }; -#define gk20a_instobj(p) container_of((p), struct gk20a_instobj, memory) +#define gk20a_instobj(p) container_of((p), struct gk20a_instobj, base.memory) /* * Used for objects allocated using the DMA API @@ -148,7 +148,7 @@ gk20a_instobj_iommu_recycle_vaddr(struct gk20a_instobj_iommu *obj) list_del(&obj->vaddr_node); vunmap(obj->base.vaddr); obj->base.vaddr = NULL; - imem->vaddr_use -= nvkm_memory_size(&obj->base.memory); + imem->vaddr_use -= nvkm_memory_size(&obj->base.base.memory); nvkm_debug(&imem->base.subdev, "vaddr used: %x/%x\n", imem->vaddr_use, imem->vaddr_max); } @@ -283,7 +283,7 @@ gk20a_instobj_map(struct nvkm_memory *memory, u64 offset, struct nvkm_vmm *vmm, { struct gk20a_instobj *node = gk20a_instobj(memory); struct nvkm_vmm_map map = { - .memory = &node->memory, + .memory = &node->base.memory, .offset = offset, .mem = node->mn, }; @@ -391,8 +391,8 @@ gk20a_instobj_ctor_dma(struct gk20a_instmem *imem, u32 npages, u32 align, return -ENOMEM; *_node = &node->base; - nvkm_memory_ctor(&gk20a_instobj_func_dma, &node->base.memory); - node->base.memory.ptrs = &gk20a_instobj_ptrs; + nvkm_memory_ctor(&gk20a_instobj_func_dma, &node->base.base.memory); + node->base.base.memory.ptrs = &gk20a_instobj_ptrs; node->base.vaddr = dma_alloc_attrs(dev, npages << PAGE_SHIFT, &node->handle, GFP_KERNEL, @@ -438,8 +438,8 @@ gk20a_instobj_ctor_iommu(struct gk20a_instmem *imem, u32 npages, u32 align, *_node = &node->base; node->dma_addrs = (void *)(node->pages + npages); - nvkm_memory_ctor(&gk20a_instobj_func_iommu, &node->base.memory); - node->base.memory.ptrs = &gk20a_instobj_ptrs; + nvkm_memory_ctor(&gk20a_instobj_func_iommu, &node->base.base.memory); + node->base.base.memory.ptrs = &gk20a_instobj_ptrs; /* Allocate backing memory */ for (i = 0; i < npages; i++) { @@ -533,7 +533,7 @@ gk20a_instobj_new(struct nvkm_instmem *base, u32 size, u32 align, bool zero, else ret = gk20a_instobj_ctor_dma(imem, size >> PAGE_SHIFT, align, &node); - *pmemory = node ? &node->memory : NULL; + *pmemory = node ? &node->base.memory : NULL; if (ret) return ret; -- cgit v1.2.3 From 7ba84cbf18c7a53107c64880d9c90f18fa68b481 Mon Sep 17 00:00:00 2001 From: Lyude Paul Date: Wed, 13 Dec 2023 19:43:57 -0500 Subject: drm/nouveau/kms/nv50-: Don't allow inheritance of headless iors Turns out we made a silly mistake when coming up with OR inheritance on nouveau. On pre-DCB 4.1, iors are statically routed to output paths via the DCB. On later generations iors are only routed to an output path if they're actually being used. Unfortunately, it appears with NVIF_OUTP_INHERIT_V0 we make the mistake of assuming the later is true on all generations, which is currently leading us to return bogus ior -> head assignments through nvif, which causes WARN_ON(). So - fix this by verifying that we actually know that there's a head assigned to an ior before allowing it to be inherited through nvif. This -should- hopefully fix the WARN_ON on GT218 reported by Borislav. Signed-off-by: Lyude Paul Cc: Borislav Petkov Reported-by: Borislav Petkov (AMD) Tested-by: Borislav Petkov (AMD) Signed-off-by: Dave Airlie Link: https://patchwork.freedesktop.org/patch/msgid/20231214004359.1028109-1-lyude@redhat.com --- drivers/gpu/drm/nouveau/nvkm/engine/disp/uoutp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/nouveau/nvkm/engine/disp/uoutp.c b/drivers/gpu/drm/nouveau/nvkm/engine/disp/uoutp.c index e4279f1772a1..377d0e0cef84 100644 --- a/drivers/gpu/drm/nouveau/nvkm/engine/disp/uoutp.c +++ b/drivers/gpu/drm/nouveau/nvkm/engine/disp/uoutp.c @@ -385,7 +385,7 @@ nvkm_uoutp_mthd_inherit(struct nvkm_outp *outp, void *argv, u32 argc) /* Ensure an ior is hooked up to this outp already */ ior = outp->func->inherit(outp); - if (!ior) + if (!ior || !ior->arm.head) return -ENODEV; /* With iors, there will be a separate output path for each type of connector - and all of -- cgit v1.2.3 From ef3d5cf9c59cccb012aa6b93d99f4c6eb5d6648e Mon Sep 17 00:00:00 2001 From: Ira Weiny Date: Mon, 16 Oct 2023 16:25:05 -0700 Subject: cxl/pmu: Ensure put_device on pmu devices The following kmemleaks were detected when removing the cxl module stack: unreferenced object 0xffff88822616b800 (size 1024): ... backtrace: [<00000000bedc6f83>] kmalloc_trace+0x26/0x90 [<00000000448d1afc>] devm_cxl_pmu_add+0x3a/0x110 [cxl_core] [<00000000ca3bfe16>] 0xffffffffa105213b [<00000000ba7f78dc>] local_pci_probe+0x41/0x90 [<000000005bb027ac>] pci_device_probe+0xb0/0x1c0 ... unreferenced object 0xffff8882260abcc0 (size 16): ... hex dump (first 16 bytes): 70 6d 75 5f 6d 65 6d 30 2e 30 00 26 82 88 ff ff pmu_mem0.0.&.... backtrace: ... [<00000000152b5e98>] dev_set_name+0x43/0x50 [<00000000c228798b>] devm_cxl_pmu_add+0x102/0x110 [cxl_core] [<00000000ca3bfe16>] 0xffffffffa105213b [<00000000ba7f78dc>] local_pci_probe+0x41/0x90 [<000000005bb027ac>] pci_device_probe+0xb0/0x1c0 ... unreferenced object 0xffff8882272af200 (size 256): ... backtrace: [<00000000bedc6f83>] kmalloc_trace+0x26/0x90 [<00000000a14d1813>] device_add+0x4ea/0x890 [<00000000a3f07b47>] devm_cxl_pmu_add+0xbe/0x110 [cxl_core] [<00000000ca3bfe16>] 0xffffffffa105213b [<00000000ba7f78dc>] local_pci_probe+0x41/0x90 [<000000005bb027ac>] pci_device_probe+0xb0/0x1c0 ... devm_cxl_pmu_add() correctly registers a device remove function but it only calls device_del() which is only part of device unregistration. Properly call device_unregister() to free up the memory associated with the device. Fixes: 1ad3f701c399 ("cxl/pci: Find and register CXL PMU devices") Cc: Jonathan Cameron Signed-off-by: Ira Weiny Reviewed-by: Jonathan Cameron Reviewed-by: Dave Jiang Link: https://lore.kernel.org/r/20231016-pmu-unregister-fix-v1-1-1e2eb2fa3c69@intel.com Signed-off-by: Dan Williams --- drivers/cxl/core/pmu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/cxl/core/pmu.c b/drivers/cxl/core/pmu.c index 7684c843e5a5..5d8e06b0ba6e 100644 --- a/drivers/cxl/core/pmu.c +++ b/drivers/cxl/core/pmu.c @@ -23,7 +23,7 @@ const struct device_type cxl_pmu_type = { static void remove_dev(void *dev) { - device_del(dev); + device_unregister(dev); } int devm_cxl_pmu_add(struct device *parent, struct cxl_pmu_regs *regs, -- cgit v1.2.3 From 7e2c1e4b34f07d9aa8937fab88359d4a0fce468e Mon Sep 17 00:00:00 2001 From: Mark Rutland Date: Fri, 15 Dec 2023 11:24:50 +0000 Subject: perf: Fix perf_event_validate_size() lockdep splat When lockdep is enabled, the for_each_sibling_event(sibling, event) macro checks that event->ctx->mutex is held. When creating a new group leader event, we call perf_event_validate_size() on a partially initialized event where event->ctx is NULL, and so when for_each_sibling_event() attempts to check event->ctx->mutex, we get a splat, as reported by Lucas De Marchi: WARNING: CPU: 8 PID: 1471 at kernel/events/core.c:1950 __do_sys_perf_event_open+0xf37/0x1080 This only happens for a new event which is its own group_leader, and in this case there cannot be any sibling events. Thus it's safe to skip the check for siblings, which avoids having to make invasive and ugly changes to for_each_sibling_event(). Avoid the splat by bailing out early when the new event is its own group_leader. Fixes: 382c27f4ed28f803 ("perf: Fix perf_event_validate_size()") Closes: https://lore.kernel.org/lkml/20231214000620.3081018-1-lucas.demarchi@intel.com/ Closes: https://lore.kernel.org/lkml/ZXpm6gQ%2Fd59jGsuW@xpf.sh.intel.com/ Reported-by: Lucas De Marchi Reported-by: Pengfei Xu Signed-off-by: Mark Rutland Signed-off-by: Peter Zijlstra (Intel) Link: https://lkml.kernel.org/r/20231215112450.3972309-1-mark.rutland@arm.com --- kernel/events/core.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/kernel/events/core.c b/kernel/events/core.c index c9d123e13b57..9efd0d7775e7 100644 --- a/kernel/events/core.c +++ b/kernel/events/core.c @@ -1947,6 +1947,16 @@ static bool perf_event_validate_size(struct perf_event *event) group_leader->nr_siblings + 1) > 16*1024) return false; + /* + * When creating a new group leader, group_leader->ctx is initialized + * after the size has been validated, but we cannot safely use + * for_each_sibling_event() until group_leader->ctx is set. A new group + * leader cannot have any siblings yet, so we can safely skip checking + * the non-existent siblings. + */ + if (event == group_leader) + return true; + for_each_sibling_event(sibling, group_leader) { if (__perf_event_read_size(sibling->attr.read_format, group_leader->nr_siblings + 1) > 16*1024) -- cgit v1.2.3 From 9483aa44912f26da2b69dade6099c2bf4b50a8c3 Mon Sep 17 00:00:00 2001 From: Shubhrajyoti Datta Date: Fri, 15 Dec 2023 11:03:52 +0530 Subject: EDAC/versal: Read num_csrows and num_chans using the correct bitfield macro Fix the extraction of num_csrows and num_chans. The extraction of the num_rows is wrong. Instead of extracting using the FIELD_GET it is calling FIELD_PREP. The issue was masked as the default design has the rows as 0. Fixes: 6f15b178cd63 ("EDAC/versal: Add a Xilinx Versal memory controller driver") Closes: https://lore.kernel.org/all/60ca157e-6eff-d12c-9dc0-8aeab125edda@linux-m68k.org/ Reported-by: Geert Uytterhoeven Signed-off-by: Shubhrajyoti Datta Signed-off-by: Borislav Petkov (AMD) Link: https://lore.kernel.org/r/20231215053352.8740-1-shubhrajyoti.datta@amd.com --- drivers/edac/versal_edac.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/edac/versal_edac.c b/drivers/edac/versal_edac.c index 87e730dfefa0..8625de20fc71 100644 --- a/drivers/edac/versal_edac.c +++ b/drivers/edac/versal_edac.c @@ -966,10 +966,10 @@ static int mc_probe(struct platform_device *pdev) edac_mc_id = emif_get_id(pdev->dev.of_node); regval = readl(ddrmc_baseaddr + XDDR_REG_CONFIG0_OFFSET); - num_chans = FIELD_PREP(XDDR_REG_CONFIG0_NUM_CHANS_MASK, regval); + num_chans = FIELD_GET(XDDR_REG_CONFIG0_NUM_CHANS_MASK, regval); num_chans++; - num_csrows = FIELD_PREP(XDDR_REG_CONFIG0_NUM_RANKS_MASK, regval); + num_csrows = FIELD_GET(XDDR_REG_CONFIG0_NUM_RANKS_MASK, regval); num_csrows *= 2; if (!num_csrows) num_csrows = 1; -- cgit v1.2.3 From dd939425707898da992e59ab0fcfae4652546910 Mon Sep 17 00:00:00 2001 From: "Steven Rostedt (Google)" Date: Thu, 14 Dec 2023 22:29:21 -0500 Subject: ring-buffer: Do not try to put back write_stamp If an update to an event is interrupted by another event between the time the initial event allocated its buffer and where it wrote to the write_stamp, the code try to reset the write stamp back to the what it had just overwritten. It knows that it was overwritten via checking the before_stamp, and if it didn't match what it wrote to the before_stamp before it allocated its space, it knows it was overwritten. To put back the write_stamp, it uses the before_stamp it read. The problem here is that by writing the before_stamp to the write_stamp it makes the two equal again, which means that the write_stamp can be considered valid as the last timestamp written to the ring buffer. But this is not necessarily true. The event that interrupted the event could have been interrupted in a way that it was interrupted as well, and can end up leaving with an invalid write_stamp. But if this happens and returns to this context that uses the before_stamp to update the write_stamp again, it can possibly incorrectly make it valid, causing later events to have in correct time stamps. As it is OK to leave this function with an invalid write_stamp (one that doesn't match the before_stamp), there's no reason to try to make it valid again in this case. If this race happens, then just leave with the invalid write_stamp and the next event to come along will just add a absolute timestamp and validate everything again. Bonus points: This gets rid of another cmpxchg64! Link: https://lore.kernel.org/linux-trace-kernel/20231214222921.193037a7@gandalf.local.home Cc: stable@vger.kernel.org Cc: Masami Hiramatsu Cc: Mark Rutland Cc: Mathieu Desnoyers Cc: Joel Fernandes Cc: Vincent Donnefort Fixes: a389d86f7fd09 ("ring-buffer: Have nested events still record running time stamp") Signed-off-by: Steven Rostedt (Google) --- kernel/trace/ring_buffer.c | 29 ++++++----------------------- 1 file changed, 6 insertions(+), 23 deletions(-) diff --git a/kernel/trace/ring_buffer.c b/kernel/trace/ring_buffer.c index 1d9caee7f542..2668dde23343 100644 --- a/kernel/trace/ring_buffer.c +++ b/kernel/trace/ring_buffer.c @@ -3612,14 +3612,14 @@ __rb_reserve_next(struct ring_buffer_per_cpu *cpu_buffer, } if (likely(tail == w)) { - u64 save_before; - bool s_ok; - /* Nothing interrupted us between A and C */ /*D*/ rb_time_set(&cpu_buffer->write_stamp, info->ts); - barrier(); - /*E*/ s_ok = rb_time_read(&cpu_buffer->before_stamp, &save_before); - RB_WARN_ON(cpu_buffer, !s_ok); + /* + * If something came in between C and D, the write stamp + * may now not be in sync. But that's fine as the before_stamp + * will be different and then next event will just be forced + * to use an absolute timestamp. + */ if (likely(!(info->add_timestamp & (RB_ADD_STAMP_FORCE | RB_ADD_STAMP_ABSOLUTE)))) /* This did not interrupt any time update */ @@ -3627,24 +3627,7 @@ __rb_reserve_next(struct ring_buffer_per_cpu *cpu_buffer, else /* Just use full timestamp for interrupting event */ info->delta = info->ts; - barrier(); check_buffer(cpu_buffer, info, tail); - if (unlikely(info->ts != save_before)) { - /* SLOW PATH - Interrupted between C and E */ - - a_ok = rb_time_read(&cpu_buffer->write_stamp, &info->after); - RB_WARN_ON(cpu_buffer, !a_ok); - - /* Write stamp must only go forward */ - if (save_before > info->after) { - /* - * We do not care about the result, only that - * it gets updated atomically. - */ - (void)rb_time_cmpxchg(&cpu_buffer->write_stamp, - info->after, save_before); - } - } } else { u64 ts; /* SLOW PATH - Interrupted between A and C */ -- cgit v1.2.3 From 083e9f65bd215582bf8f6a920db729fadf16704f Mon Sep 17 00:00:00 2001 From: "Steven Rostedt (Google)" Date: Fri, 15 Dec 2023 08:18:10 -0500 Subject: ring-buffer: Remove useless update to write_stamp in rb_try_to_discard() When filtering is enabled, a temporary buffer is created to place the content of the trace event output so that the filter logic can decide from the trace event output if the trace event should be filtered out or not. If it is to be filtered out, the content in the temporary buffer is simply discarded, otherwise it is written into the trace buffer. But if an interrupt were to come in while a previous event was using that temporary buffer, the event written by the interrupt would actually go into the ring buffer itself to prevent corrupting the data on the temporary buffer. If the event is to be filtered out, the event in the ring buffer is discarded, or if it fails to discard because another event were to have already come in, it is turned into padding. The update to the write_stamp in the rb_try_to_discard() happens after a fix was made to force the next event after the discard to use an absolute timestamp by setting the before_stamp to zero so it does not match the write_stamp (which causes an event to use the absolute timestamp). But there's an effort in rb_try_to_discard() to put back the write_stamp to what it was before the event was added. But this is useless and wasteful because nothing is going to be using that write_stamp for calculations as it still will not match the before_stamp. Remove this useless update, and in doing so, we remove another cmpxchg64()! Also update the comments to reflect this change as well as remove some extra white space in another comment. Link: https://lore.kernel.org/linux-trace-kernel/20231215081810.1f4f38fe@rorschach.local.home Cc: Masami Hiramatsu Cc: Mark Rutland Cc: Mathieu Desnoyers Cc: Joel Fernandes Cc: Vincent Donnefort Fixes: b2dd797543cf ("ring-buffer: Force absolute timestamp on discard of event") Signed-off-by: Steven Rostedt (Google) --- kernel/trace/ring_buffer.c | 47 +++++++++++----------------------------------- 1 file changed, 11 insertions(+), 36 deletions(-) diff --git a/kernel/trace/ring_buffer.c b/kernel/trace/ring_buffer.c index 2668dde23343..ad4af0cba159 100644 --- a/kernel/trace/ring_buffer.c +++ b/kernel/trace/ring_buffer.c @@ -2983,25 +2983,6 @@ static unsigned rb_calculate_event_length(unsigned length) return length; } -static u64 rb_time_delta(struct ring_buffer_event *event) -{ - switch (event->type_len) { - case RINGBUF_TYPE_PADDING: - return 0; - - case RINGBUF_TYPE_TIME_EXTEND: - return rb_event_time_stamp(event); - - case RINGBUF_TYPE_TIME_STAMP: - return 0; - - case RINGBUF_TYPE_DATA: - return event->time_delta; - default: - return 0; - } -} - static inline bool rb_try_to_discard(struct ring_buffer_per_cpu *cpu_buffer, struct ring_buffer_event *event) @@ -3009,8 +2990,6 @@ rb_try_to_discard(struct ring_buffer_per_cpu *cpu_buffer, unsigned long new_index, old_index; struct buffer_page *bpage; unsigned long addr; - u64 write_stamp; - u64 delta; new_index = rb_event_index(event); old_index = new_index + rb_event_ts_length(event); @@ -3019,14 +2998,10 @@ rb_try_to_discard(struct ring_buffer_per_cpu *cpu_buffer, bpage = READ_ONCE(cpu_buffer->tail_page); - delta = rb_time_delta(event); - - if (!rb_time_read(&cpu_buffer->write_stamp, &write_stamp)) - return false; - - /* Make sure the write stamp is read before testing the location */ - barrier(); - + /* + * Make sure the tail_page is still the same and + * the next write location is the end of this event + */ if (bpage->page == (void *)addr && rb_page_write(bpage) == old_index) { unsigned long write_mask = local_read(&bpage->write) & ~RB_WRITE_MASK; @@ -3037,20 +3012,20 @@ rb_try_to_discard(struct ring_buffer_per_cpu *cpu_buffer, * to make sure that the next event adds an absolute * value and does not rely on the saved write stamp, which * is now going to be bogus. + * + * By setting the before_stamp to zero, the next event + * is not going to use the write_stamp and will instead + * create an absolute timestamp. This means there's no + * reason to update the wirte_stamp! */ rb_time_set(&cpu_buffer->before_stamp, 0); - /* Something came in, can't discard */ - if (!rb_time_cmpxchg(&cpu_buffer->write_stamp, - write_stamp, write_stamp - delta)) - return false; - /* * If an event were to come in now, it would see that the * write_stamp and the before_stamp are different, and assume * that this event just added itself before updating * the write stamp. The interrupting event will fix the - * write stamp for us, and use the before stamp as its delta. + * write stamp for us, and use an absolute timestamp. */ /* @@ -3487,7 +3462,7 @@ static void check_buffer(struct ring_buffer_per_cpu *cpu_buffer, return; /* - * If this interrupted another event, + * If this interrupted another event, */ if (atomic_inc_return(this_cpu_ptr(&checking)) != 1) goto out; -- cgit v1.2.3 From fff88fa0fbc7067ba46dde570912d63da42c59a9 Mon Sep 17 00:00:00 2001 From: "Steven Rostedt (Google)" Date: Tue, 12 Dec 2023 11:53:01 -0500 Subject: ring-buffer: Fix a race in rb_time_cmpxchg() for 32 bit archs Mathieu Desnoyers pointed out an issue in the rb_time_cmpxchg() for 32 bit architectures. That is: static bool rb_time_cmpxchg(rb_time_t *t, u64 expect, u64 set) { unsigned long cnt, top, bottom, msb; unsigned long cnt2, top2, bottom2, msb2; u64 val; /* The cmpxchg always fails if it interrupted an update */ if (!__rb_time_read(t, &val, &cnt2)) return false; if (val != expect) return false; <<<< interrupted here! cnt = local_read(&t->cnt); The problem is that the synchronization counter in the rb_time_t is read *after* the value of the timestamp is read. That means if an interrupt were to come in between the value being read and the counter being read, it can change the value and the counter and the interrupted process would be clueless about it! The counter needs to be read first and then the value. That way it is easy to tell if the value is stale or not. If the counter hasn't been updated, then the value is still good. Link: https://lore.kernel.org/linux-trace-kernel/20231211201324.652870-1-mathieu.desnoyers@efficios.com/ Link: https://lore.kernel.org/linux-trace-kernel/20231212115301.7a9c9a64@gandalf.local.home Cc: stable@vger.kernel.org Cc: Masami Hiramatsu Cc: Mark Rutland Fixes: 10464b4aa605e ("ring-buffer: Add rb_time_t 64 bit operations for speeding up 32 bit") Reported-by: Mathieu Desnoyers Reviewed-by: Mathieu Desnoyers Signed-off-by: Steven Rostedt (Google) --- kernel/trace/ring_buffer.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/kernel/trace/ring_buffer.c b/kernel/trace/ring_buffer.c index ad4af0cba159..b8ab0557bd1b 100644 --- a/kernel/trace/ring_buffer.c +++ b/kernel/trace/ring_buffer.c @@ -706,6 +706,9 @@ static bool rb_time_cmpxchg(rb_time_t *t, u64 expect, u64 set) unsigned long cnt2, top2, bottom2, msb2; u64 val; + /* Any interruptions in this function should cause a failure */ + cnt = local_read(&t->cnt); + /* The cmpxchg always fails if it interrupted an update */ if (!__rb_time_read(t, &val, &cnt2)) return false; @@ -713,7 +716,6 @@ static bool rb_time_cmpxchg(rb_time_t *t, u64 expect, u64 set) if (val != expect) return false; - cnt = local_read(&t->cnt); if ((cnt & 3) != cnt2) return false; -- cgit v1.2.3 From dec890089bf79a4954b61482715ee2d084364856 Mon Sep 17 00:00:00 2001 From: Mathieu Desnoyers Date: Tue, 12 Dec 2023 14:30:49 -0500 Subject: ring-buffer: Fix 32-bit rb_time_read() race with rb_time_cmpxchg() The following race can cause rb_time_read() to observe a corrupted time stamp: rb_time_cmpxchg() [...] if (!rb_time_read_cmpxchg(&t->msb, msb, msb2)) return false; if (!rb_time_read_cmpxchg(&t->top, top, top2)) return false; __rb_time_read() [...] do { c = local_read(&t->cnt); top = local_read(&t->top); bottom = local_read(&t->bottom); msb = local_read(&t->msb); } while (c != local_read(&t->cnt)); *cnt = rb_time_cnt(top); /* If top and msb counts don't match, this interrupted a write */ if (*cnt != rb_time_cnt(msb)) return false; ^ this check fails to catch that "bottom" is still not updated. So the old "bottom" value is returned, which is wrong. Fix this by checking that all three of msb, top, and bottom 2-bit cnt values match. The reason to favor checking all three fields over requiring a specific update order for both rb_time_set() and rb_time_cmpxchg() is because checking all three fields is more robust to handle partial failures of rb_time_cmpxchg() when interrupted by nested rb_time_set(). Link: https://lore.kernel.org/lkml/20231211201324.652870-1-mathieu.desnoyers@efficios.com/ Link: https://lore.kernel.org/linux-trace-kernel/20231212193049.680122-1-mathieu.desnoyers@efficios.com Fixes: f458a1453424e ("ring-buffer: Test last update in 32bit version of __rb_time_read()") Signed-off-by: Mathieu Desnoyers Signed-off-by: Steven Rostedt (Google) --- kernel/trace/ring_buffer.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/kernel/trace/ring_buffer.c b/kernel/trace/ring_buffer.c index b8ab0557bd1b..f22a849da179 100644 --- a/kernel/trace/ring_buffer.c +++ b/kernel/trace/ring_buffer.c @@ -644,8 +644,8 @@ static inline bool __rb_time_read(rb_time_t *t, u64 *ret, unsigned long *cnt) *cnt = rb_time_cnt(top); - /* If top and msb counts don't match, this interrupted a write */ - if (*cnt != rb_time_cnt(msb)) + /* If top, msb or bottom counts don't match, this interrupted a write */ + if (*cnt != rb_time_cnt(msb) || *cnt != rb_time_cnt(bottom)) return false; /* The shift to msb will lose its cnt bits */ -- cgit v1.2.3 From 0aa0e5289cfe984a8a9fdd79ccf46ccf080151f7 Mon Sep 17 00:00:00 2001 From: "Steven Rostedt (Google)" Date: Fri, 15 Dec 2023 08:41:14 -0500 Subject: ring-buffer: Have rb_time_cmpxchg() set the msb counter too The rb_time_cmpxchg() on 32-bit architectures requires setting three 32-bit words to represent the 64-bit timestamp, with some salt for synchronization. Those are: msb, top, and bottom The issue is, the rb_time_cmpxchg() did not properly salt the msb portion, and the msb that was written was stale. Link: https://lore.kernel.org/linux-trace-kernel/20231215084114.20899342@rorschach.local.home Cc: stable@vger.kernel.org Cc: Masami Hiramatsu Cc: Mark Rutland Cc: Mathieu Desnoyers Fixes: f03f2abce4f39 ("ring-buffer: Have 32 bit time stamps use all 64 bits") Signed-off-by: Steven Rostedt (Google) --- kernel/trace/ring_buffer.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/kernel/trace/ring_buffer.c b/kernel/trace/ring_buffer.c index f22a849da179..f4679013289b 100644 --- a/kernel/trace/ring_buffer.c +++ b/kernel/trace/ring_buffer.c @@ -722,10 +722,12 @@ static bool rb_time_cmpxchg(rb_time_t *t, u64 expect, u64 set) cnt2 = cnt + 1; rb_time_split(val, &top, &bottom, &msb); + msb = rb_time_val_cnt(msb, cnt); top = rb_time_val_cnt(top, cnt); bottom = rb_time_val_cnt(bottom, cnt); rb_time_split(set, &top2, &bottom2, &msb2); + msb2 = rb_time_val_cnt(msb2, cnt); top2 = rb_time_val_cnt(top2, cnt2); bottom2 = rb_time_val_cnt(bottom2, cnt2); -- cgit v1.2.3 From 712292308af2265cd9b126aedfa987f10f452a33 Mon Sep 17 00:00:00 2001 From: "Steven Rostedt (Google)" Date: Wed, 13 Dec 2023 17:54:03 -0500 Subject: ring-buffer: Do not record in NMI if the arch does not support cmpxchg in NMI As the ring buffer recording requires cmpxchg() to work, if the architecture does not support cmpxchg in NMI, then do not do any recording within an NMI. Link: https://lore.kernel.org/linux-trace-kernel/20231213175403.6fc18540@gandalf.local.home Cc: Masami Hiramatsu Cc: Mark Rutland Cc: Mathieu Desnoyers Signed-off-by: Steven Rostedt (Google) --- kernel/trace/ring_buffer.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/kernel/trace/ring_buffer.c b/kernel/trace/ring_buffer.c index f4679013289b..5a114e752f11 100644 --- a/kernel/trace/ring_buffer.c +++ b/kernel/trace/ring_buffer.c @@ -3674,6 +3674,12 @@ rb_reserve_next_event(struct trace_buffer *buffer, int nr_loops = 0; int add_ts_default; + /* ring buffer does cmpxchg, make sure it is safe in NMI context */ + if (!IS_ENABLED(CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG) && + (unlikely(in_nmi()))) { + return NULL; + } + rb_start_commit(cpu_buffer); /* The commit page can not change after this */ -- cgit v1.2.3 From 5df12742b7e3aae2594a30a9d14d5d6e9e7699f4 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Thu, 14 Dec 2023 09:08:56 -0600 Subject: Revert "PCI: acpiphp: Reassign resources on bridge if necessary" This reverts commit 40613da52b13fb21c5566f10b287e0ca8c12c4e9 and the subsequent fix to it: cc22522fd55e ("PCI: acpiphp: Use pci_assign_unassigned_bridge_resources() only for non-root bus") 40613da52b13 fixed a problem where hot-adding a device with large BARs failed if the bridge windows programmed by firmware were not large enough. cc22522fd55e ("PCI: acpiphp: Use pci_assign_unassigned_bridge_resources() only for non-root bus") fixed a problem with 40613da52b13: an ACPI hot-add of a device on a PCI root bus (common in the virt world) or firmware sending ACPI Bus Check to non-existent Root Ports (e.g., on Dell Inspiron 7352/0W6WV0) caused a NULL pointer dereference and suspend/resume hangs. Unfortunately the combination of 40613da52b13 and cc22522fd55e caused other problems: - Fiona reported that hot-add of SCSI disks in QEMU virtual machine fails sometimes. - Dongli reported a similar problem with hot-add of SCSI disks. - Jonathan reported a console freeze during boot on bare metal due to an error in radeon GPU initialization. Revert both patches to avoid adding these problems. This means we will again see the problems with hot-adding devices with large BARs and the NULL pointer dereferences and suspend/resume issues that 40613da52b13 and cc22522fd55e were intended to fix. Fixes: 40613da52b13 ("PCI: acpiphp: Reassign resources on bridge if necessary") Fixes: cc22522fd55e ("PCI: acpiphp: Use pci_assign_unassigned_bridge_resources() only for non-root bus") Reported-by: Fiona Ebner Closes: https://lore.kernel.org/r/9eb669c0-d8f2-431d-a700-6da13053ae54@proxmox.com Reported-by: Dongli Zhang Closes: https://lore.kernel.org/r/3c4a446a-b167-11b8-f36f-d3c1b49b42e9@oracle.com Reported-by: Jonathan Woithe Closes: https://lore.kernel.org/r/ZXpaNCLiDM+Kv38H@marvin.atrad.com.au Signed-off-by: Bjorn Helgaas Acked-by: Michael S. Tsirkin Acked-by: Igor Mammedov Cc: --- drivers/pci/hotplug/acpiphp_glue.c | 9 +++------ 1 file changed, 3 insertions(+), 6 deletions(-) diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c index 601129772b2d..5b1f271c6034 100644 --- a/drivers/pci/hotplug/acpiphp_glue.c +++ b/drivers/pci/hotplug/acpiphp_glue.c @@ -512,15 +512,12 @@ static void enable_slot(struct acpiphp_slot *slot, bool bridge) if (pass && dev->subordinate) { check_hotplug_bridge(slot, dev); pcibios_resource_survey_bus(dev->subordinate); - if (pci_is_root_bus(bus)) - __pci_bus_size_bridges(dev->subordinate, &add_list); + __pci_bus_size_bridges(dev->subordinate, + &add_list); } } } - if (pci_is_root_bus(bus)) - __pci_bus_assign_resources(bus, &add_list, NULL); - else - pci_assign_unassigned_bridge_resources(bus->self); + __pci_bus_assign_resources(bus, &add_list, NULL); } acpiphp_sanitize_bus(bus); -- cgit v1.2.3 From f8fa5d76925991976b3e7076f9d1052515ec1fca Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Fri, 15 Dec 2023 13:24:10 -0700 Subject: cred: switch to using atomic_long_t There are multiple ways to grab references to credentials, and the only protection we have against overflowing it is the memory required to do so. With memory sizes only moving in one direction, let's bump the reference count to 64-bit and move it outside the realm of feasibly overflowing. Signed-off-by: Jens Axboe Signed-off-by: Linus Torvalds --- include/linux/cred.h | 8 +++---- kernel/cred.c | 64 ++++++++++++++++++++++++++-------------------------- 2 files changed, 36 insertions(+), 36 deletions(-) diff --git a/include/linux/cred.h b/include/linux/cred.h index af8d353a4b86..a3383f8efb8f 100644 --- a/include/linux/cred.h +++ b/include/linux/cred.h @@ -109,7 +109,7 @@ static inline int groups_search(const struct group_info *group_info, kgid_t grp) * same context as task->real_cred. */ struct cred { - atomic_t usage; + atomic_long_t usage; #ifdef CONFIG_DEBUG_CREDENTIALS atomic_t subscribers; /* number of processes subscribed */ void *put_addr; @@ -229,7 +229,7 @@ static inline bool cap_ambient_invariant_ok(const struct cred *cred) */ static inline struct cred *get_new_cred_many(struct cred *cred, int nr) { - atomic_add(nr, &cred->usage); + atomic_long_add(nr, &cred->usage); return cred; } @@ -288,7 +288,7 @@ static inline const struct cred *get_cred_rcu(const struct cred *cred) struct cred *nonconst_cred = (struct cred *) cred; if (!cred) return NULL; - if (!atomic_inc_not_zero(&nonconst_cred->usage)) + if (!atomic_long_inc_not_zero(&nonconst_cred->usage)) return NULL; validate_creds(cred); nonconst_cred->non_rcu = 0; @@ -313,7 +313,7 @@ static inline void put_cred_many(const struct cred *_cred, int nr) if (cred) { validate_creds(cred); - if (atomic_sub_and_test(nr, &cred->usage)) + if (atomic_long_sub_and_test(nr, &cred->usage)) __put_cred(cred); } } diff --git a/kernel/cred.c b/kernel/cred.c index 3c714cb31660..4a6cd0f0fef5 100644 --- a/kernel/cred.c +++ b/kernel/cred.c @@ -102,17 +102,17 @@ static void put_cred_rcu(struct rcu_head *rcu) #ifdef CONFIG_DEBUG_CREDENTIALS if (cred->magic != CRED_MAGIC_DEAD || - atomic_read(&cred->usage) != 0 || + atomic_long_read(&cred->usage) != 0 || read_cred_subscribers(cred) != 0) panic("CRED: put_cred_rcu() sees %p with" - " mag %x, put %p, usage %d, subscr %d\n", + " mag %x, put %p, usage %ld, subscr %d\n", cred, cred->magic, cred->put_addr, - atomic_read(&cred->usage), + atomic_long_read(&cred->usage), read_cred_subscribers(cred)); #else - if (atomic_read(&cred->usage) != 0) - panic("CRED: put_cred_rcu() sees %p with usage %d\n", - cred, atomic_read(&cred->usage)); + if (atomic_long_read(&cred->usage) != 0) + panic("CRED: put_cred_rcu() sees %p with usage %ld\n", + cred, atomic_long_read(&cred->usage)); #endif security_cred_free(cred); @@ -137,11 +137,11 @@ static void put_cred_rcu(struct rcu_head *rcu) */ void __put_cred(struct cred *cred) { - kdebug("__put_cred(%p{%d,%d})", cred, - atomic_read(&cred->usage), + kdebug("__put_cred(%p{%ld,%d})", cred, + atomic_long_read(&cred->usage), read_cred_subscribers(cred)); - BUG_ON(atomic_read(&cred->usage) != 0); + BUG_ON(atomic_long_read(&cred->usage) != 0); #ifdef CONFIG_DEBUG_CREDENTIALS BUG_ON(read_cred_subscribers(cred) != 0); cred->magic = CRED_MAGIC_DEAD; @@ -164,8 +164,8 @@ void exit_creds(struct task_struct *tsk) { struct cred *real_cred, *cred; - kdebug("exit_creds(%u,%p,%p,{%d,%d})", tsk->pid, tsk->real_cred, tsk->cred, - atomic_read(&tsk->cred->usage), + kdebug("exit_creds(%u,%p,%p,{%ld,%d})", tsk->pid, tsk->real_cred, tsk->cred, + atomic_long_read(&tsk->cred->usage), read_cred_subscribers(tsk->cred)); real_cred = (struct cred *) tsk->real_cred; @@ -230,7 +230,7 @@ struct cred *cred_alloc_blank(void) if (!new) return NULL; - atomic_set(&new->usage, 1); + atomic_long_set(&new->usage, 1); #ifdef CONFIG_DEBUG_CREDENTIALS new->magic = CRED_MAGIC; #endif @@ -276,7 +276,7 @@ struct cred *prepare_creds(void) memcpy(new, old, sizeof(struct cred)); new->non_rcu = 0; - atomic_set(&new->usage, 1); + atomic_long_set(&new->usage, 1); set_cred_subscribers(new, 0); get_group_info(new->group_info); get_uid(new->user); @@ -363,8 +363,8 @@ int copy_creds(struct task_struct *p, unsigned long clone_flags) ) { p->real_cred = get_cred_many(p->cred, 2); alter_cred_subscribers(p->cred, 2); - kdebug("share_creds(%p{%d,%d})", - p->cred, atomic_read(&p->cred->usage), + kdebug("share_creds(%p{%ld,%d})", + p->cred, atomic_long_read(&p->cred->usage), read_cred_subscribers(p->cred)); inc_rlimit_ucounts(task_ucounts(p), UCOUNT_RLIMIT_NPROC, 1); return 0; @@ -457,8 +457,8 @@ int commit_creds(struct cred *new) struct task_struct *task = current; const struct cred *old = task->real_cred; - kdebug("commit_creds(%p{%d,%d})", new, - atomic_read(&new->usage), + kdebug("commit_creds(%p{%ld,%d})", new, + atomic_long_read(&new->usage), read_cred_subscribers(new)); BUG_ON(task->cred != old); @@ -467,7 +467,7 @@ int commit_creds(struct cred *new) validate_creds(old); validate_creds(new); #endif - BUG_ON(atomic_read(&new->usage) < 1); + BUG_ON(atomic_long_read(&new->usage) < 1); get_cred(new); /* we will require a ref for the subj creds too */ @@ -539,14 +539,14 @@ EXPORT_SYMBOL(commit_creds); */ void abort_creds(struct cred *new) { - kdebug("abort_creds(%p{%d,%d})", new, - atomic_read(&new->usage), + kdebug("abort_creds(%p{%ld,%d})", new, + atomic_long_read(&new->usage), read_cred_subscribers(new)); #ifdef CONFIG_DEBUG_CREDENTIALS BUG_ON(read_cred_subscribers(new) != 0); #endif - BUG_ON(atomic_read(&new->usage) < 1); + BUG_ON(atomic_long_read(&new->usage) < 1); put_cred(new); } EXPORT_SYMBOL(abort_creds); @@ -562,8 +562,8 @@ const struct cred *override_creds(const struct cred *new) { const struct cred *old = current->cred; - kdebug("override_creds(%p{%d,%d})", new, - atomic_read(&new->usage), + kdebug("override_creds(%p{%ld,%d})", new, + atomic_long_read(&new->usage), read_cred_subscribers(new)); validate_creds(old); @@ -585,8 +585,8 @@ const struct cred *override_creds(const struct cred *new) rcu_assign_pointer(current->cred, new); alter_cred_subscribers(old, -1); - kdebug("override_creds() = %p{%d,%d}", old, - atomic_read(&old->usage), + kdebug("override_creds() = %p{%ld,%d}", old, + atomic_long_read(&old->usage), read_cred_subscribers(old)); return old; } @@ -603,8 +603,8 @@ void revert_creds(const struct cred *old) { const struct cred *override = current->cred; - kdebug("revert_creds(%p{%d,%d})", old, - atomic_read(&old->usage), + kdebug("revert_creds(%p{%ld,%d})", old, + atomic_long_read(&old->usage), read_cred_subscribers(old)); validate_creds(old); @@ -735,7 +735,7 @@ struct cred *prepare_kernel_cred(struct task_struct *daemon) *new = *old; new->non_rcu = 0; - atomic_set(&new->usage, 1); + atomic_long_set(&new->usage, 1); set_cred_subscribers(new, 0); get_uid(new->user); get_user_ns(new->user_ns); @@ -849,8 +849,8 @@ static void dump_invalid_creds(const struct cred *cred, const char *label, cred == tsk->cred ? "[eff]" : ""); pr_err("->magic=%x, put_addr=%p\n", cred->magic, cred->put_addr); - pr_err("->usage=%d, subscr=%d\n", - atomic_read(&cred->usage), + pr_err("->usage=%ld, subscr=%d\n", + atomic_long_read(&cred->usage), read_cred_subscribers(cred)); pr_err("->*uid = { %d,%d,%d,%d }\n", from_kuid_munged(&init_user_ns, cred->uid), @@ -922,9 +922,9 @@ EXPORT_SYMBOL(__validate_process_creds); */ void validate_creds_for_do_exit(struct task_struct *tsk) { - kdebug("validate_creds_for_do_exit(%p,%p{%d,%d})", + kdebug("validate_creds_for_do_exit(%p,%p{%ld,%d})", tsk->real_cred, tsk->cred, - atomic_read(&tsk->cred->usage), + atomic_long_read(&tsk->cred->usage), read_cred_subscribers(tsk->cred)); __validate_process_creds(tsk, __FILE__, __LINE__); -- cgit v1.2.3 From ae1914174a63a558113e80d24ccac2773f9f7b2b Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Fri, 15 Dec 2023 13:40:57 -0700 Subject: cred: get rid of CONFIG_DEBUG_CREDENTIALS This code is rarely (never?) enabled by distros, and it hasn't caught anything in decades. Let's kill off this legacy debug code. Suggested-by: Linus Torvalds Signed-off-by: Jens Axboe Signed-off-by: Linus Torvalds --- arch/powerpc/configs/skiroot_defconfig | 1 - arch/s390/configs/debug_defconfig | 1 - fs/nfsd/auth.c | 4 - fs/nfsd/nfssvc.c | 1 - fs/nfsd/vfs.c | 9 +- fs/open.c | 3 - include/linux/cred.h | 50 ------- kernel/cred.c | 231 +++--------------------------- kernel/exit.c | 3 - lib/Kconfig.debug | 15 -- net/sunrpc/auth.c | 3 - security/selinux/hooks.c | 6 - tools/objtool/noreturns.h | 1 - tools/testing/selftests/bpf/config.x86_64 | 1 - tools/testing/selftests/hid/config.common | 1 - 15 files changed, 17 insertions(+), 313 deletions(-) diff --git a/arch/powerpc/configs/skiroot_defconfig b/arch/powerpc/configs/skiroot_defconfig index 8d3eacb50d56..9d44e6630908 100644 --- a/arch/powerpc/configs/skiroot_defconfig +++ b/arch/powerpc/configs/skiroot_defconfig @@ -301,7 +301,6 @@ CONFIG_WQ_WATCHDOG=y CONFIG_DEBUG_SG=y CONFIG_DEBUG_NOTIFIERS=y CONFIG_BUG_ON_DATA_CORRUPTION=y -CONFIG_DEBUG_CREDENTIALS=y # CONFIG_FTRACE is not set CONFIG_XMON=y # CONFIG_RUNTIME_TESTING_MENU is not set diff --git a/arch/s390/configs/debug_defconfig b/arch/s390/configs/debug_defconfig index 438cd92e6080..dd0608629310 100644 --- a/arch/s390/configs/debug_defconfig +++ b/arch/s390/configs/debug_defconfig @@ -834,7 +834,6 @@ CONFIG_DEBUG_IRQFLAGS=y CONFIG_DEBUG_LIST=y CONFIG_DEBUG_SG=y CONFIG_DEBUG_NOTIFIERS=y -CONFIG_DEBUG_CREDENTIALS=y CONFIG_RCU_TORTURE_TEST=m CONFIG_RCU_REF_SCALE_TEST=m CONFIG_RCU_CPU_STALL_TIMEOUT=300 diff --git a/fs/nfsd/auth.c b/fs/nfsd/auth.c index fdf2aad73470..e6beaaf4f170 100644 --- a/fs/nfsd/auth.c +++ b/fs/nfsd/auth.c @@ -26,8 +26,6 @@ int nfsd_setuser(struct svc_rqst *rqstp, struct svc_export *exp) int i; int flags = nfsexp_flags(rqstp, exp); - validate_process_creds(); - /* discard any old override before preparing the new set */ revert_creds(get_cred(current_real_cred())); new = prepare_creds(); @@ -81,10 +79,8 @@ int nfsd_setuser(struct svc_rqst *rqstp, struct svc_export *exp) else new->cap_effective = cap_raise_nfsd_set(new->cap_effective, new->cap_permitted); - validate_process_creds(); put_cred(override_creds(new)); put_cred(new); - validate_process_creds(); return 0; oom: diff --git a/fs/nfsd/nfssvc.c b/fs/nfsd/nfssvc.c index fe61d9bbcc1f..5014ab87d313 100644 --- a/fs/nfsd/nfssvc.c +++ b/fs/nfsd/nfssvc.c @@ -955,7 +955,6 @@ nfsd(void *vrqstp) rqstp->rq_server->sv_maxconn = nn->max_connections; svc_recv(rqstp); - validate_process_creds(); } atomic_dec(&nfsdstats.th_cnt); diff --git a/fs/nfsd/vfs.c b/fs/nfsd/vfs.c index fbbea7498f02..e01e4e2acbd9 100644 --- a/fs/nfsd/vfs.c +++ b/fs/nfsd/vfs.c @@ -901,7 +901,6 @@ nfsd_open(struct svc_rqst *rqstp, struct svc_fh *fhp, umode_t type, int host_err; bool retried = false; - validate_process_creds(); /* * If we get here, then the client has already done an "open", * and (hopefully) checked permission - so allow OWNER_OVERRIDE @@ -926,7 +925,6 @@ retry: } err = nfserrno(host_err); } - validate_process_creds(); return err; } @@ -943,12 +941,7 @@ int nfsd_open_verified(struct svc_rqst *rqstp, struct svc_fh *fhp, int may_flags, struct file **filp) { - int err; - - validate_process_creds(); - err = __nfsd_open(rqstp, fhp, S_IFREG, may_flags, filp); - validate_process_creds(); - return err; + return __nfsd_open(rqstp, fhp, S_IFREG, may_flags, filp); } /* diff --git a/fs/open.c b/fs/open.c index 02dc608d40d8..3494a9cd8046 100644 --- a/fs/open.c +++ b/fs/open.c @@ -1088,8 +1088,6 @@ struct file *dentry_open(const struct path *path, int flags, int error; struct file *f; - validate_creds(cred); - /* We must always pass in a valid mount pointer. */ BUG_ON(!path->mnt); @@ -1128,7 +1126,6 @@ struct file *dentry_create(const struct path *path, int flags, umode_t mode, struct file *f; int error; - validate_creds(cred); f = alloc_empty_file(flags, cred); if (IS_ERR(f)) return f; diff --git a/include/linux/cred.h b/include/linux/cred.h index a3383f8efb8f..2976f534a7a3 100644 --- a/include/linux/cred.h +++ b/include/linux/cred.h @@ -110,13 +110,6 @@ static inline int groups_search(const struct group_info *group_info, kgid_t grp) */ struct cred { atomic_long_t usage; -#ifdef CONFIG_DEBUG_CREDENTIALS - atomic_t subscribers; /* number of processes subscribed */ - void *put_addr; - unsigned magic; -#define CRED_MAGIC 0x43736564 -#define CRED_MAGIC_DEAD 0x44656144 -#endif kuid_t uid; /* real UID of the task */ kgid_t gid; /* real GID of the task */ kuid_t suid; /* saved UID of the task */ @@ -172,46 +165,6 @@ extern int cred_fscmp(const struct cred *, const struct cred *); extern void __init cred_init(void); extern int set_cred_ucounts(struct cred *); -/* - * check for validity of credentials - */ -#ifdef CONFIG_DEBUG_CREDENTIALS -extern void __noreturn __invalid_creds(const struct cred *, const char *, unsigned); -extern void __validate_process_creds(struct task_struct *, - const char *, unsigned); - -extern bool creds_are_invalid(const struct cred *cred); - -static inline void __validate_creds(const struct cred *cred, - const char *file, unsigned line) -{ - if (unlikely(creds_are_invalid(cred))) - __invalid_creds(cred, file, line); -} - -#define validate_creds(cred) \ -do { \ - __validate_creds((cred), __FILE__, __LINE__); \ -} while(0) - -#define validate_process_creds() \ -do { \ - __validate_process_creds(current, __FILE__, __LINE__); \ -} while(0) - -extern void validate_creds_for_do_exit(struct task_struct *); -#else -static inline void validate_creds(const struct cred *cred) -{ -} -static inline void validate_creds_for_do_exit(struct task_struct *tsk) -{ -} -static inline void validate_process_creds(void) -{ -} -#endif - static inline bool cap_ambient_invariant_ok(const struct cred *cred) { return cap_issubset(cred->cap_ambient, @@ -264,7 +217,6 @@ static inline const struct cred *get_cred_many(const struct cred *cred, int nr) struct cred *nonconst_cred = (struct cred *) cred; if (!cred) return cred; - validate_creds(cred); nonconst_cred->non_rcu = 0; return get_new_cred_many(nonconst_cred, nr); } @@ -290,7 +242,6 @@ static inline const struct cred *get_cred_rcu(const struct cred *cred) return NULL; if (!atomic_long_inc_not_zero(&nonconst_cred->usage)) return NULL; - validate_creds(cred); nonconst_cred->non_rcu = 0; return cred; } @@ -312,7 +263,6 @@ static inline void put_cred_many(const struct cred *_cred, int nr) struct cred *cred = (struct cred *) _cred; if (cred) { - validate_creds(cred); if (atomic_long_sub_and_test(nr, &cred->usage)) __put_cred(cred); } diff --git a/kernel/cred.c b/kernel/cred.c index 4a6cd0f0fef5..c033a201c808 100644 --- a/kernel/cred.c +++ b/kernel/cred.c @@ -43,10 +43,6 @@ static struct group_info init_groups = { .usage = REFCOUNT_INIT(2) }; */ struct cred init_cred = { .usage = ATOMIC_INIT(4), -#ifdef CONFIG_DEBUG_CREDENTIALS - .subscribers = ATOMIC_INIT(2), - .magic = CRED_MAGIC, -#endif .uid = GLOBAL_ROOT_UID, .gid = GLOBAL_ROOT_GID, .suid = GLOBAL_ROOT_UID, @@ -66,31 +62,6 @@ struct cred init_cred = { .ucounts = &init_ucounts, }; -static inline void set_cred_subscribers(struct cred *cred, int n) -{ -#ifdef CONFIG_DEBUG_CREDENTIALS - atomic_set(&cred->subscribers, n); -#endif -} - -static inline int read_cred_subscribers(const struct cred *cred) -{ -#ifdef CONFIG_DEBUG_CREDENTIALS - return atomic_read(&cred->subscribers); -#else - return 0; -#endif -} - -static inline void alter_cred_subscribers(const struct cred *_cred, int n) -{ -#ifdef CONFIG_DEBUG_CREDENTIALS - struct cred *cred = (struct cred *) _cred; - - atomic_add(n, &cred->subscribers); -#endif -} - /* * The RCU callback to actually dispose of a set of credentials */ @@ -100,20 +71,9 @@ static void put_cred_rcu(struct rcu_head *rcu) kdebug("put_cred_rcu(%p)", cred); -#ifdef CONFIG_DEBUG_CREDENTIALS - if (cred->magic != CRED_MAGIC_DEAD || - atomic_long_read(&cred->usage) != 0 || - read_cred_subscribers(cred) != 0) - panic("CRED: put_cred_rcu() sees %p with" - " mag %x, put %p, usage %ld, subscr %d\n", - cred, cred->magic, cred->put_addr, - atomic_long_read(&cred->usage), - read_cred_subscribers(cred)); -#else if (atomic_long_read(&cred->usage) != 0) panic("CRED: put_cred_rcu() sees %p with usage %ld\n", cred, atomic_long_read(&cred->usage)); -#endif security_cred_free(cred); key_put(cred->session_keyring); @@ -137,16 +97,10 @@ static void put_cred_rcu(struct rcu_head *rcu) */ void __put_cred(struct cred *cred) { - kdebug("__put_cred(%p{%ld,%d})", cred, - atomic_long_read(&cred->usage), - read_cred_subscribers(cred)); + kdebug("__put_cred(%p{%ld})", cred, + atomic_long_read(&cred->usage)); BUG_ON(atomic_long_read(&cred->usage) != 0); -#ifdef CONFIG_DEBUG_CREDENTIALS - BUG_ON(read_cred_subscribers(cred) != 0); - cred->magic = CRED_MAGIC_DEAD; - cred->put_addr = __builtin_return_address(0); -#endif BUG_ON(cred == current->cred); BUG_ON(cred == current->real_cred); @@ -164,9 +118,8 @@ void exit_creds(struct task_struct *tsk) { struct cred *real_cred, *cred; - kdebug("exit_creds(%u,%p,%p,{%ld,%d})", tsk->pid, tsk->real_cred, tsk->cred, - atomic_long_read(&tsk->cred->usage), - read_cred_subscribers(tsk->cred)); + kdebug("exit_creds(%u,%p,%p,{%ld})", tsk->pid, tsk->real_cred, tsk->cred, + atomic_long_read(&tsk->cred->usage)); real_cred = (struct cred *) tsk->real_cred; tsk->real_cred = NULL; @@ -174,15 +127,10 @@ void exit_creds(struct task_struct *tsk) cred = (struct cred *) tsk->cred; tsk->cred = NULL; - validate_creds(cred); if (real_cred == cred) { - alter_cred_subscribers(cred, -2); put_cred_many(cred, 2); } else { - validate_creds(real_cred); - alter_cred_subscribers(real_cred, -1); put_cred(real_cred); - alter_cred_subscribers(cred, -1); put_cred(cred); } @@ -231,9 +179,6 @@ struct cred *cred_alloc_blank(void) return NULL; atomic_long_set(&new->usage, 1); -#ifdef CONFIG_DEBUG_CREDENTIALS - new->magic = CRED_MAGIC; -#endif if (security_cred_alloc_blank(new, GFP_KERNEL_ACCOUNT) < 0) goto error; @@ -264,8 +209,6 @@ struct cred *prepare_creds(void) const struct cred *old; struct cred *new; - validate_process_creds(); - new = kmem_cache_alloc(cred_jar, GFP_KERNEL); if (!new) return NULL; @@ -277,7 +220,6 @@ struct cred *prepare_creds(void) new->non_rcu = 0; atomic_long_set(&new->usage, 1); - set_cred_subscribers(new, 0); get_group_info(new->group_info); get_uid(new->user); get_user_ns(new->user_ns); @@ -300,7 +242,6 @@ struct cred *prepare_creds(void) if (security_prepare_creds(new, old, GFP_KERNEL_ACCOUNT) < 0) goto error; - validate_creds(new); return new; error: @@ -362,10 +303,8 @@ int copy_creds(struct task_struct *p, unsigned long clone_flags) clone_flags & CLONE_THREAD ) { p->real_cred = get_cred_many(p->cred, 2); - alter_cred_subscribers(p->cred, 2); - kdebug("share_creds(%p{%ld,%d})", - p->cred, atomic_long_read(&p->cred->usage), - read_cred_subscribers(p->cred)); + kdebug("share_creds(%p{%ld})", + p->cred, atomic_long_read(&p->cred->usage)); inc_rlimit_ucounts(task_ucounts(p), UCOUNT_RLIMIT_NPROC, 1); return 0; } @@ -404,8 +343,6 @@ int copy_creds(struct task_struct *p, unsigned long clone_flags) p->cred = p->real_cred = get_cred(new); inc_rlimit_ucounts(task_ucounts(p), UCOUNT_RLIMIT_NPROC, 1); - alter_cred_subscribers(new, 2); - validate_creds(new); return 0; error_put: @@ -457,16 +394,10 @@ int commit_creds(struct cred *new) struct task_struct *task = current; const struct cred *old = task->real_cred; - kdebug("commit_creds(%p{%ld,%d})", new, - atomic_long_read(&new->usage), - read_cred_subscribers(new)); + kdebug("commit_creds(%p{%ld})", new, + atomic_long_read(&new->usage)); BUG_ON(task->cred != old); -#ifdef CONFIG_DEBUG_CREDENTIALS - BUG_ON(read_cred_subscribers(old) < 2); - validate_creds(old); - validate_creds(new); -#endif BUG_ON(atomic_long_read(&new->usage) < 1); get_cred(new); /* we will require a ref for the subj creds too */ @@ -502,14 +433,12 @@ int commit_creds(struct cred *new) * RLIMIT_NPROC limits on user->processes have already been checked * in set_user(). */ - alter_cred_subscribers(new, 2); if (new->user != old->user || new->user_ns != old->user_ns) inc_rlimit_ucounts(new->ucounts, UCOUNT_RLIMIT_NPROC, 1); rcu_assign_pointer(task->real_cred, new); rcu_assign_pointer(task->cred, new); if (new->user != old->user || new->user_ns != old->user_ns) dec_rlimit_ucounts(old->ucounts, UCOUNT_RLIMIT_NPROC, 1); - alter_cred_subscribers(old, -2); /* send notifications */ if (!uid_eq(new->uid, old->uid) || @@ -539,13 +468,9 @@ EXPORT_SYMBOL(commit_creds); */ void abort_creds(struct cred *new) { - kdebug("abort_creds(%p{%ld,%d})", new, - atomic_long_read(&new->usage), - read_cred_subscribers(new)); + kdebug("abort_creds(%p{%ld})", new, + atomic_long_read(&new->usage)); -#ifdef CONFIG_DEBUG_CREDENTIALS - BUG_ON(read_cred_subscribers(new) != 0); -#endif BUG_ON(atomic_long_read(&new->usage) < 1); put_cred(new); } @@ -562,12 +487,8 @@ const struct cred *override_creds(const struct cred *new) { const struct cred *old = current->cred; - kdebug("override_creds(%p{%ld,%d})", new, - atomic_long_read(&new->usage), - read_cred_subscribers(new)); - - validate_creds(old); - validate_creds(new); + kdebug("override_creds(%p{%ld})", new, + atomic_long_read(&new->usage)); /* * NOTE! This uses 'get_new_cred()' rather than 'get_cred()'. @@ -576,18 +497,12 @@ const struct cred *override_creds(const struct cred *new) * we are only installing the cred into the thread-synchronous * '->cred' pointer, not the '->real_cred' pointer that is * visible to other threads under RCU. - * - * Also note that we did validate_creds() manually, not depending - * on the validation in 'get_cred()'. */ get_new_cred((struct cred *)new); - alter_cred_subscribers(new, 1); rcu_assign_pointer(current->cred, new); - alter_cred_subscribers(old, -1); - kdebug("override_creds() = %p{%ld,%d}", old, - atomic_long_read(&old->usage), - read_cred_subscribers(old)); + kdebug("override_creds() = %p{%ld}", old, + atomic_long_read(&old->usage)); return old; } EXPORT_SYMBOL(override_creds); @@ -603,15 +518,10 @@ void revert_creds(const struct cred *old) { const struct cred *override = current->cred; - kdebug("revert_creds(%p{%ld,%d})", old, - atomic_long_read(&old->usage), - read_cred_subscribers(old)); + kdebug("revert_creds(%p{%ld})", old, + atomic_long_read(&old->usage)); - validate_creds(old); - validate_creds(override); - alter_cred_subscribers(old, 1); rcu_assign_pointer(current->cred, old); - alter_cred_subscribers(override, -1); put_cred(override); } EXPORT_SYMBOL(revert_creds); @@ -731,12 +641,10 @@ struct cred *prepare_kernel_cred(struct task_struct *daemon) kdebug("prepare_kernel_cred() alloc %p", new); old = get_task_cred(daemon); - validate_creds(old); *new = *old; new->non_rcu = 0; atomic_long_set(&new->usage, 1); - set_cred_subscribers(new, 0); get_uid(new->user); get_user_ns(new->user_ns); get_group_info(new->group_info); @@ -760,7 +668,6 @@ struct cred *prepare_kernel_cred(struct task_struct *daemon) goto error; put_cred(old); - validate_creds(new); return new; error: @@ -825,109 +732,3 @@ int set_create_files_as(struct cred *new, struct inode *inode) return security_kernel_create_files_as(new, inode); } EXPORT_SYMBOL(set_create_files_as); - -#ifdef CONFIG_DEBUG_CREDENTIALS - -bool creds_are_invalid(const struct cred *cred) -{ - if (cred->magic != CRED_MAGIC) - return true; - return false; -} -EXPORT_SYMBOL(creds_are_invalid); - -/* - * dump invalid credentials - */ -static void dump_invalid_creds(const struct cred *cred, const char *label, - const struct task_struct *tsk) -{ - pr_err("%s credentials: %p %s%s%s\n", - label, cred, - cred == &init_cred ? "[init]" : "", - cred == tsk->real_cred ? "[real]" : "", - cred == tsk->cred ? "[eff]" : ""); - pr_err("->magic=%x, put_addr=%p\n", - cred->magic, cred->put_addr); - pr_err("->usage=%ld, subscr=%d\n", - atomic_long_read(&cred->usage), - read_cred_subscribers(cred)); - pr_err("->*uid = { %d,%d,%d,%d }\n", - from_kuid_munged(&init_user_ns, cred->uid), - from_kuid_munged(&init_user_ns, cred->euid), - from_kuid_munged(&init_user_ns, cred->suid), - from_kuid_munged(&init_user_ns, cred->fsuid)); - pr_err("->*gid = { %d,%d,%d,%d }\n", - from_kgid_munged(&init_user_ns, cred->gid), - from_kgid_munged(&init_user_ns, cred->egid), - from_kgid_munged(&init_user_ns, cred->sgid), - from_kgid_munged(&init_user_ns, cred->fsgid)); -#ifdef CONFIG_SECURITY - pr_err("->security is %p\n", cred->security); - if ((unsigned long) cred->security >= PAGE_SIZE && - (((unsigned long) cred->security & 0xffffff00) != - (POISON_FREE << 24 | POISON_FREE << 16 | POISON_FREE << 8))) - pr_err("->security {%x, %x}\n", - ((u32*)cred->security)[0], - ((u32*)cred->security)[1]); -#endif -} - -/* - * report use of invalid credentials - */ -void __noreturn __invalid_creds(const struct cred *cred, const char *file, unsigned line) -{ - pr_err("Invalid credentials\n"); - pr_err("At %s:%u\n", file, line); - dump_invalid_creds(cred, "Specified", current); - BUG(); -} -EXPORT_SYMBOL(__invalid_creds); - -/* - * check the credentials on a process - */ -void __validate_process_creds(struct task_struct *tsk, - const char *file, unsigned line) -{ - if (tsk->cred == tsk->real_cred) { - if (unlikely(read_cred_subscribers(tsk->cred) < 2 || - creds_are_invalid(tsk->cred))) - goto invalid_creds; - } else { - if (unlikely(read_cred_subscribers(tsk->real_cred) < 1 || - read_cred_subscribers(tsk->cred) < 1 || - creds_are_invalid(tsk->real_cred) || - creds_are_invalid(tsk->cred))) - goto invalid_creds; - } - return; - -invalid_creds: - pr_err("Invalid process credentials\n"); - pr_err("At %s:%u\n", file, line); - - dump_invalid_creds(tsk->real_cred, "Real", tsk); - if (tsk->cred != tsk->real_cred) - dump_invalid_creds(tsk->cred, "Effective", tsk); - else - pr_err("Effective creds == Real creds\n"); - BUG(); -} -EXPORT_SYMBOL(__validate_process_creds); - -/* - * check creds for do_exit() - */ -void validate_creds_for_do_exit(struct task_struct *tsk) -{ - kdebug("validate_creds_for_do_exit(%p,%p{%ld,%d})", - tsk->real_cred, tsk->cred, - atomic_long_read(&tsk->cred->usage), - read_cred_subscribers(tsk->cred)); - - __validate_process_creds(tsk, __FILE__, __LINE__); -} - -#endif /* CONFIG_DEBUG_CREDENTIALS */ diff --git a/kernel/exit.c b/kernel/exit.c index ee9f43bed49a..aedc0832c9f4 100644 --- a/kernel/exit.c +++ b/kernel/exit.c @@ -824,8 +824,6 @@ void __noreturn do_exit(long code) ptrace_event(PTRACE_EVENT_EXIT, code); user_events_exit(tsk); - validate_creds_for_do_exit(tsk); - io_uring_files_cancel(); exit_signals(tsk); /* sets PF_EXITING */ @@ -909,7 +907,6 @@ void __noreturn do_exit(long code) if (tsk->task_frag.page) put_page(tsk->task_frag.page); - validate_creds_for_do_exit(tsk); exit_task_stack_account(tsk); check_stack_usage(); diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug index cc7d53d9dc01..4405f81248fb 100644 --- a/lib/Kconfig.debug +++ b/lib/Kconfig.debug @@ -1739,21 +1739,6 @@ config DEBUG_MAPLE_TREE endmenu -config DEBUG_CREDENTIALS - bool "Debug credential management" - depends on DEBUG_KERNEL - help - Enable this to turn on some debug checking for credential - management. The additional code keeps track of the number of - pointers from task_structs to any given cred struct, and checks to - see that this number never exceeds the usage count of the cred - struct. - - Furthermore, if SELinux is enabled, this also checks that the - security pointer in the cred struct is never seen to be invalid. - - If unsure, say N. - source "kernel/rcu/Kconfig.debug" config DEBUG_WQ_FORCE_RR_CPU diff --git a/net/sunrpc/auth.c b/net/sunrpc/auth.c index 7bfe7d9a32aa..04534ea537c8 100644 --- a/net/sunrpc/auth.c +++ b/net/sunrpc/auth.c @@ -40,9 +40,6 @@ static unsigned long number_cred_unused; static struct cred machine_cred = { .usage = ATOMIC_INIT(1), -#ifdef CONFIG_DEBUG_CREDENTIALS - .magic = CRED_MAGIC, -#endif }; /* diff --git a/security/selinux/hooks.c b/security/selinux/hooks.c index feda711c6b7b..340b2bbbb2dd 100644 --- a/security/selinux/hooks.c +++ b/security/selinux/hooks.c @@ -1660,8 +1660,6 @@ static int inode_has_perm(const struct cred *cred, struct inode_security_struct *isec; u32 sid; - validate_creds(cred); - if (unlikely(IS_PRIVATE(inode))) return 0; @@ -3056,8 +3054,6 @@ static int selinux_inode_follow_link(struct dentry *dentry, struct inode *inode, struct inode_security_struct *isec; u32 sid; - validate_creds(cred); - ad.type = LSM_AUDIT_DATA_DENTRY; ad.u.dentry = dentry; sid = cred_sid(cred); @@ -3101,8 +3097,6 @@ static int selinux_inode_permission(struct inode *inode, int mask) if (!mask) return 0; - validate_creds(cred); - if (unlikely(IS_PRIVATE(inode))) return 0; diff --git a/tools/objtool/noreturns.h b/tools/objtool/noreturns.h index 649ebdef9c3f..1685d7ea6a9f 100644 --- a/tools/objtool/noreturns.h +++ b/tools/objtool/noreturns.h @@ -6,7 +6,6 @@ * * Yes, this is unfortunate. A better solution is in the works. */ -NORETURN(__invalid_creds) NORETURN(__kunit_abort) NORETURN(__module_put_and_kthread_exit) NORETURN(__reiserfs_panic) diff --git a/tools/testing/selftests/bpf/config.x86_64 b/tools/testing/selftests/bpf/config.x86_64 index 2e70a6048278..49a29dbc1910 100644 --- a/tools/testing/selftests/bpf/config.x86_64 +++ b/tools/testing/selftests/bpf/config.x86_64 @@ -50,7 +50,6 @@ CONFIG_CRYPTO_SEQIV=y CONFIG_CRYPTO_XXHASH=y CONFIG_DCB=y CONFIG_DEBUG_ATOMIC_SLEEP=y -CONFIG_DEBUG_CREDENTIALS=y CONFIG_DEBUG_INFO_BTF=y CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y CONFIG_DEBUG_MEMORY_INIT=y diff --git a/tools/testing/selftests/hid/config.common b/tools/testing/selftests/hid/config.common index 0617275d93cc..0f456dbab62f 100644 --- a/tools/testing/selftests/hid/config.common +++ b/tools/testing/selftests/hid/config.common @@ -46,7 +46,6 @@ CONFIG_CRYPTO_SEQIV=y CONFIG_CRYPTO_XXHASH=y CONFIG_DCB=y CONFIG_DEBUG_ATOMIC_SLEEP=y -CONFIG_DEBUG_CREDENTIALS=y CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y CONFIG_DEBUG_MEMORY_INIT=y CONFIG_DEFAULT_FQ_CODEL=y -- cgit v1.2.3 From a8892fd71933126ebae3d60aec5918d4dceaae76 Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Fri, 15 Dec 2023 10:01:44 -0500 Subject: btrfs: do not allow non subvolume root targets for snapshot Our btrfs subvolume snapshot utility enforces that is the root of the subvolume, however this isn't enforced in the kernel. Update the kernel to also enforce this limitation to avoid problems with other users of this ioctl that don't have the appropriate checks in place. Reported-by: Martin Michaelis CC: stable@vger.kernel.org # 4.14+ Reviewed-by: Neal Gompa Signed-off-by: Josef Bacik Reviewed-by: David Sterba Signed-off-by: David Sterba --- fs/btrfs/ioctl.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c index 2429ae87ad44..f70ee61dfb70 100644 --- a/fs/btrfs/ioctl.c +++ b/fs/btrfs/ioctl.c @@ -1290,6 +1290,15 @@ static noinline int __btrfs_ioctl_snap_create(struct file *file, * are limited to own subvolumes only */ ret = -EPERM; + } else if (btrfs_ino(BTRFS_I(src_inode)) != BTRFS_FIRST_FREE_OBJECTID) { + /* + * Snapshots must be made with the src_inode referring + * to the subvolume inode, otherwise the permission + * checking above is useless because we may have + * permission on a lower directory but not the subvol + * itself. + */ + ret = -EINVAL; } else { ret = btrfs_mksnapshot(&file->f_path, idmap, name, namelen, -- cgit v1.2.3 From ceb6a6f023fd3e8b07761ed900352ef574010bcb Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sun, 17 Dec 2023 15:19:28 -0800 Subject: Linux 6.7-rc6 --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index 70fc4c11dfc0..e78ee7db0729 100644 --- a/Makefile +++ b/Makefile @@ -2,7 +2,7 @@ VERSION = 6 PATCHLEVEL = 7 SUBLEVEL = 0 -EXTRAVERSION = -rc5 +EXTRAVERSION = -rc6 NAME = Hurr durr I'ma ninja sloth # *DOCUMENTATION* -- cgit v1.2.3 From 7ab6fb505b2a7447c4a7237a12c59e3ad0c7298c Mon Sep 17 00:00:00 2001 From: Bibo Mao Date: Tue, 19 Dec 2023 10:48:27 +0800 Subject: LoongArch: KVM: Optimization for memslot hugepage checking During shadow mmu page fault, there is checking for huge page for specified memslot. Page fault is hot path, check logic can be done when memslot is created. Here two flags are added for huge page checking, KVM_MEM_HUGEPAGE_CAPABLE and KVM_MEM_HUGEPAGE_INCAPABLE. Indeed for an optimized qemu, memslot for DRAM is always huge page aligned. The flag is firstly checked during hot page fault path. Now only huge page flag is supported, there is a long way for super page support in LoongArch system. Since super page size is 64G for 16K pagesize and 1G for 4K pagesize, 64G physical address is rarely used and LoongArch kernel needs support super page for 4K. Also memory layout of LoongArch qemu VM should be 1G aligned. Signed-off-by: Bibo Mao Signed-off-by: Huacai Chen --- arch/loongarch/include/asm/kvm_host.h | 3 + arch/loongarch/kvm/mmu.c | 124 +++++++++++++++++++++++----------- 2 files changed, 86 insertions(+), 41 deletions(-) diff --git a/arch/loongarch/include/asm/kvm_host.h b/arch/loongarch/include/asm/kvm_host.h index 11328700d4fa..0e89db020481 100644 --- a/arch/loongarch/include/asm/kvm_host.h +++ b/arch/loongarch/include/asm/kvm_host.h @@ -45,7 +45,10 @@ struct kvm_vcpu_stat { u64 signal_exits; }; +#define KVM_MEM_HUGEPAGE_CAPABLE (1UL << 0) +#define KVM_MEM_HUGEPAGE_INCAPABLE (1UL << 1) struct kvm_arch_memory_slot { + unsigned long flags; }; struct kvm_context { diff --git a/arch/loongarch/kvm/mmu.c b/arch/loongarch/kvm/mmu.c index 80480df5f550..915f17527893 100644 --- a/arch/loongarch/kvm/mmu.c +++ b/arch/loongarch/kvm/mmu.c @@ -13,6 +13,16 @@ #include #include +static inline bool kvm_hugepage_capable(struct kvm_memory_slot *slot) +{ + return slot->arch.flags & KVM_MEM_HUGEPAGE_CAPABLE; +} + +static inline bool kvm_hugepage_incapable(struct kvm_memory_slot *slot) +{ + return slot->arch.flags & KVM_MEM_HUGEPAGE_INCAPABLE; +} + static inline void kvm_ptw_prepare(struct kvm *kvm, kvm_ptw_ctx *ctx) { ctx->level = kvm->arch.root_level; @@ -365,6 +375,69 @@ void kvm_arch_mmu_enable_log_dirty_pt_masked(struct kvm *kvm, kvm_ptw_top(kvm->arch.pgd, start << PAGE_SHIFT, end << PAGE_SHIFT, &ctx); } +int kvm_arch_prepare_memory_region(struct kvm *kvm, const struct kvm_memory_slot *old, + struct kvm_memory_slot *new, enum kvm_mr_change change) +{ + gpa_t gpa_start; + hva_t hva_start; + size_t size, gpa_offset, hva_offset; + + if ((change != KVM_MR_MOVE) && (change != KVM_MR_CREATE)) + return 0; + /* + * Prevent userspace from creating a memory region outside of the + * VM GPA address space + */ + if ((new->base_gfn + new->npages) > (kvm->arch.gpa_size >> PAGE_SHIFT)) + return -ENOMEM; + + new->arch.flags = 0; + size = new->npages * PAGE_SIZE; + gpa_start = new->base_gfn << PAGE_SHIFT; + hva_start = new->userspace_addr; + if (IS_ALIGNED(size, PMD_SIZE) && IS_ALIGNED(gpa_start, PMD_SIZE) + && IS_ALIGNED(hva_start, PMD_SIZE)) + new->arch.flags |= KVM_MEM_HUGEPAGE_CAPABLE; + else { + /* + * Pages belonging to memslots that don't have the same + * alignment within a PMD for userspace and GPA cannot be + * mapped with PMD entries, because we'll end up mapping + * the wrong pages. + * + * Consider a layout like the following: + * + * memslot->userspace_addr: + * +-----+--------------------+--------------------+---+ + * |abcde|fgh Stage-1 block | Stage-1 block tv|xyz| + * +-----+--------------------+--------------------+---+ + * + * memslot->base_gfn << PAGE_SIZE: + * +---+--------------------+--------------------+-----+ + * |abc|def Stage-2 block | Stage-2 block |tvxyz| + * +---+--------------------+--------------------+-----+ + * + * If we create those stage-2 blocks, we'll end up with this + * incorrect mapping: + * d -> f + * e -> g + * f -> h + */ + gpa_offset = gpa_start & (PMD_SIZE - 1); + hva_offset = hva_start & (PMD_SIZE - 1); + if (gpa_offset != hva_offset) { + new->arch.flags |= KVM_MEM_HUGEPAGE_INCAPABLE; + } else { + if (gpa_offset == 0) + gpa_offset = PMD_SIZE; + if ((size + gpa_offset) < (PMD_SIZE * 2)) + new->arch.flags |= KVM_MEM_HUGEPAGE_INCAPABLE; + } + } + + return 0; +} + void kvm_arch_commit_memory_region(struct kvm *kvm, struct kvm_memory_slot *old, const struct kvm_memory_slot *new, @@ -562,47 +635,23 @@ out: } static bool fault_supports_huge_mapping(struct kvm_memory_slot *memslot, - unsigned long hva, unsigned long map_size, bool write) + unsigned long hva, bool write) { - size_t size; - gpa_t gpa_start; - hva_t uaddr_start, uaddr_end; + hva_t start, end; /* Disable dirty logging on HugePages */ if (kvm_slot_dirty_track_enabled(memslot) && write) return false; - size = memslot->npages * PAGE_SIZE; - gpa_start = memslot->base_gfn << PAGE_SHIFT; - uaddr_start = memslot->userspace_addr; - uaddr_end = uaddr_start + size; + if (kvm_hugepage_capable(memslot)) + return true; - /* - * Pages belonging to memslots that don't have the same alignment - * within a PMD for userspace and GPA cannot be mapped with stage-2 - * PMD entries, because we'll end up mapping the wrong pages. - * - * Consider a layout like the following: - * - * memslot->userspace_addr: - * +-----+--------------------+--------------------+---+ - * |abcde|fgh Stage-1 block | Stage-1 block tv|xyz| - * +-----+--------------------+--------------------+---+ - * - * memslot->base_gfn << PAGE_SIZE: - * +---+--------------------+--------------------+-----+ - * |abc|def Stage-2 block | Stage-2 block |tvxyz| - * +---+--------------------+--------------------+-----+ - * - * If we create those stage-2 blocks, we'll end up with this incorrect - * mapping: - * d -> f - * e -> g - * f -> h - */ - if ((gpa_start & (map_size - 1)) != (uaddr_start & (map_size - 1))) + if (kvm_hugepage_incapable(memslot)) return false; + start = memslot->userspace_addr; + end = start + memslot->npages * PAGE_SIZE; + /* * Next, let's make sure we're not trying to map anything not covered * by the memslot. This means we have to prohibit block size mappings @@ -615,8 +664,7 @@ static bool fault_supports_huge_mapping(struct kvm_memory_slot *memslot, * userspace_addr or the base_gfn, as both are equally aligned (per * the check above) and equally sized. */ - return (hva & ~(map_size - 1)) >= uaddr_start && - (hva & ~(map_size - 1)) + map_size <= uaddr_end; + return (hva >= ALIGN(start, PMD_SIZE)) && (hva < ALIGN_DOWN(end, PMD_SIZE)); } /* @@ -842,7 +890,7 @@ retry: /* Disable dirty logging on HugePages */ level = 0; - if (!fault_supports_huge_mapping(memslot, hva, PMD_SIZE, write)) { + if (!fault_supports_huge_mapping(memslot, hva, write)) { level = 0; } else { level = host_pfn_mapping_level(kvm, gfn, memslot); @@ -901,12 +949,6 @@ void kvm_arch_sync_dirty_log(struct kvm *kvm, struct kvm_memory_slot *memslot) { } -int kvm_arch_prepare_memory_region(struct kvm *kvm, const struct kvm_memory_slot *old, - struct kvm_memory_slot *new, enum kvm_mr_change change) -{ - return 0; -} - void kvm_arch_flush_remote_tlbs_memslot(struct kvm *kvm, const struct kvm_memory_slot *memslot) { -- cgit v1.2.3 From 161267320158920a601e40d83fdac60bcaa2acb5 Mon Sep 17 00:00:00 2001 From: Bibo Mao Date: Tue, 19 Dec 2023 10:48:27 +0800 Subject: LoongArch: KVM: Remove SW timer switch when vcpu is halt polling With halt-polling supported, there is checking for pending events or interrupts when vcpu executes idle instruction. Pending interrupts include injected SW interrupts and passthrough HW interrupts, such as HW timer interrupts, since HW timer works still even if vcpu exists from VM mode. Since HW timer pending interrupt can be set directly with CSR status register, and pending HW timer interrupt checking is used in vcpu block checking function, it is not necessary to switch to SW timer during halt-polling. This patch adds preemption disabling in function kvm_cpu_has_pending_timer(), and removes SW timer switching in idle instruction emulation function. Signed-off-by: Bibo Mao Signed-off-by: Huacai Chen --- arch/loongarch/kvm/exit.c | 13 ++----------- arch/loongarch/kvm/timer.c | 12 +++++++++--- arch/loongarch/kvm/vcpu.c | 9 ++++++++- 3 files changed, 19 insertions(+), 15 deletions(-) diff --git a/arch/loongarch/kvm/exit.c b/arch/loongarch/kvm/exit.c index ce8de3fa472c..e708a1786d6b 100644 --- a/arch/loongarch/kvm/exit.c +++ b/arch/loongarch/kvm/exit.c @@ -200,17 +200,8 @@ int kvm_emu_idle(struct kvm_vcpu *vcpu) ++vcpu->stat.idle_exits; trace_kvm_exit_idle(vcpu, KVM_TRACE_EXIT_IDLE); - if (!kvm_arch_vcpu_runnable(vcpu)) { - /* - * Switch to the software timer before halt-polling/blocking as - * the guest's timer may be a break event for the vCPU, and the - * hypervisor timer runs only when the CPU is in guest mode. - * Switch before halt-polling so that KVM recognizes an expired - * timer before blocking. - */ - kvm_save_timer(vcpu); - kvm_vcpu_block(vcpu); - } + if (!kvm_arch_vcpu_runnable(vcpu)) + kvm_vcpu_halt(vcpu); return EMULATE_DONE; } diff --git a/arch/loongarch/kvm/timer.c b/arch/loongarch/kvm/timer.c index 284bf553fefe..12d58040122d 100644 --- a/arch/loongarch/kvm/timer.c +++ b/arch/loongarch/kvm/timer.c @@ -155,11 +155,17 @@ static void _kvm_save_timer(struct kvm_vcpu *vcpu) */ hrtimer_cancel(&vcpu->arch.swtimer); hrtimer_start(&vcpu->arch.swtimer, expire, HRTIMER_MODE_ABS_PINNED); - } else + } else if (vcpu->stat.generic.blocking) { /* - * Inject timer interrupt so that hall polling can dectect and exit + * Inject timer interrupt so that halt polling can dectect and exit. + * VCPU is scheduled out already and sleeps in rcuwait queue and + * will not poll pending events again. kvm_queue_irq() is not enough, + * hrtimer swtimer should be used here. */ - kvm_queue_irq(vcpu, INT_TI); + expire = ktime_add_ns(ktime_get(), 10); + vcpu->arch.expire = expire; + hrtimer_start(&vcpu->arch.swtimer, expire, HRTIMER_MODE_ABS_PINNED); + } } /* diff --git a/arch/loongarch/kvm/vcpu.c b/arch/loongarch/kvm/vcpu.c index 73d0c2b9c1a5..54f544b30f32 100644 --- a/arch/loongarch/kvm/vcpu.c +++ b/arch/loongarch/kvm/vcpu.c @@ -187,8 +187,15 @@ int kvm_arch_vcpu_ioctl_translate(struct kvm_vcpu *vcpu, int kvm_cpu_has_pending_timer(struct kvm_vcpu *vcpu) { - return kvm_pending_timer(vcpu) || + int ret; + + /* Protect from TOD sync and vcpu_load/put() */ + preempt_disable(); + ret = kvm_pending_timer(vcpu) || kvm_read_hw_gcsr(LOONGARCH_CSR_ESTAT) & (1 << INT_TI); + preempt_enable(); + + return ret; } int kvm_arch_vcpu_dump_regs(struct kvm_vcpu *vcpu) -- cgit v1.2.3 From 0d2abe67029644741bf7400b0d00c2faa3e1c455 Mon Sep 17 00:00:00 2001 From: Bibo Mao Date: Tue, 19 Dec 2023 10:48:27 +0800 Subject: LoongArch: KVM: Allow to access HW timer CSR registers always Currently HW timer CSR registers are allowed to access before entering to vm and disabled if switch to SW timer in host mode, instead it is not necessary to do so. HW timer CSR registers can be accessed always, it is nothing to do with whether it is in vm mode or host mode. This patch removes the limitation. Signed-off-by: Bibo Mao Signed-off-by: Huacai Chen --- arch/loongarch/kvm/main.c | 1 - arch/loongarch/kvm/timer.c | 27 ++++++--------------------- 2 files changed, 6 insertions(+), 22 deletions(-) diff --git a/arch/loongarch/kvm/main.c b/arch/loongarch/kvm/main.c index 1c1d5199500e..86a2f2d0cb27 100644 --- a/arch/loongarch/kvm/main.c +++ b/arch/loongarch/kvm/main.c @@ -287,7 +287,6 @@ int kvm_arch_hardware_enable(void) if (env & CSR_GCFG_MATC_ROOT) gcfg |= CSR_GCFG_MATC_ROOT; - gcfg |= CSR_GCFG_TIT; write_csr_gcfg(gcfg); kvm_flush_tlb_all(); diff --git a/arch/loongarch/kvm/timer.c b/arch/loongarch/kvm/timer.c index 12d58040122d..d6d5bcea349b 100644 --- a/arch/loongarch/kvm/timer.c +++ b/arch/loongarch/kvm/timer.c @@ -70,15 +70,6 @@ void kvm_init_timer(struct kvm_vcpu *vcpu, unsigned long timer_hz) */ void kvm_acquire_timer(struct kvm_vcpu *vcpu) { - unsigned long cfg; - - cfg = read_csr_gcfg(); - if (!(cfg & CSR_GCFG_TIT)) - return; - - /* Enable guest access to hard timer */ - write_csr_gcfg(cfg & ~CSR_GCFG_TIT); - /* * Freeze the soft-timer and sync the guest stable timer with it. We do * this with interrupts disabled to avoid latency. @@ -174,21 +165,15 @@ static void _kvm_save_timer(struct kvm_vcpu *vcpu) */ void kvm_save_timer(struct kvm_vcpu *vcpu) { - unsigned long cfg; struct loongarch_csrs *csr = vcpu->arch.csr; preempt_disable(); - cfg = read_csr_gcfg(); - if (!(cfg & CSR_GCFG_TIT)) { - /* Disable guest use of hard timer */ - write_csr_gcfg(cfg | CSR_GCFG_TIT); - - /* Save hard timer state */ - kvm_save_hw_gcsr(csr, LOONGARCH_CSR_TCFG); - kvm_save_hw_gcsr(csr, LOONGARCH_CSR_TVAL); - if (kvm_read_sw_gcsr(csr, LOONGARCH_CSR_TCFG) & CSR_TCFG_EN) - _kvm_save_timer(vcpu); - } + + /* Save hard timer state */ + kvm_save_hw_gcsr(csr, LOONGARCH_CSR_TCFG); + kvm_save_hw_gcsr(csr, LOONGARCH_CSR_TVAL); + if (kvm_read_sw_gcsr(csr, LOONGARCH_CSR_TCFG) & CSR_TCFG_EN) + _kvm_save_timer(vcpu); /* Save timer-related state to vCPU context */ kvm_save_hw_gcsr(csr, LOONGARCH_CSR_ESTAT); -- cgit v1.2.3 From 1ab9c6099495f79bfbcd6058d02d7556034a89b0 Mon Sep 17 00:00:00 2001 From: Bibo Mao Date: Tue, 19 Dec 2023 10:48:28 +0800 Subject: LoongArch: KVM: Remove kvm_acquire_timer() before entering guest Timer emulation method in VM is switch to SW timer, there are two places where timer emulation is needed. One is during vcpu thread context switch, the other is halt-polling with idle instruction emulation. SW timer switching is removed during halt-polling mode, so it is not necessary to disable SW timer before entering to guest. This patch removes SW timer handling before entering guest mode, and put it in HW timer restoring flow when vcpu thread is sched-in. With this patch, vm timer emulation is simpler, there is SW/HW timer switch only in vcpu thread context switch scenario. Signed-off-by: Bibo Mao Signed-off-by: Huacai Chen --- arch/loongarch/include/asm/kvm_vcpu.h | 1 - arch/loongarch/kvm/timer.c | 22 ++++++---------------- arch/loongarch/kvm/vcpu.c | 29 ----------------------------- 3 files changed, 6 insertions(+), 46 deletions(-) diff --git a/arch/loongarch/include/asm/kvm_vcpu.h b/arch/loongarch/include/asm/kvm_vcpu.h index 553cfa2b2b1c..0e87652f780a 100644 --- a/arch/loongarch/include/asm/kvm_vcpu.h +++ b/arch/loongarch/include/asm/kvm_vcpu.h @@ -55,7 +55,6 @@ void kvm_save_fpu(struct loongarch_fpu *fpu); void kvm_restore_fpu(struct loongarch_fpu *fpu); void kvm_restore_fcsr(struct loongarch_fpu *fpu); -void kvm_acquire_timer(struct kvm_vcpu *vcpu); void kvm_init_timer(struct kvm_vcpu *vcpu, unsigned long hz); void kvm_reset_timer(struct kvm_vcpu *vcpu); void kvm_save_timer(struct kvm_vcpu *vcpu); diff --git a/arch/loongarch/kvm/timer.c b/arch/loongarch/kvm/timer.c index d6d5bcea349b..d362d87a54aa 100644 --- a/arch/loongarch/kvm/timer.c +++ b/arch/loongarch/kvm/timer.c @@ -64,19 +64,6 @@ void kvm_init_timer(struct kvm_vcpu *vcpu, unsigned long timer_hz) kvm_write_sw_gcsr(vcpu->arch.csr, LOONGARCH_CSR_TVAL, 0); } -/* - * Restore hard timer state and enable guest to access timer registers - * without trap, should be called with irq disabled - */ -void kvm_acquire_timer(struct kvm_vcpu *vcpu) -{ - /* - * Freeze the soft-timer and sync the guest stable timer with it. We do - * this with interrupts disabled to avoid latency. - */ - hrtimer_cancel(&vcpu->arch.swtimer); -} - /* * Restore soft timer state from saved context. */ @@ -98,6 +85,11 @@ void kvm_restore_timer(struct kvm_vcpu *vcpu) return; } + /* + * Freeze the soft-timer and sync the guest stable timer with it. + */ + hrtimer_cancel(&vcpu->arch.swtimer); + /* * Set remainder tick value if not expired */ @@ -115,7 +107,7 @@ void kvm_restore_timer(struct kvm_vcpu *vcpu) /* * Inject timer here though sw timer should inject timer * interrupt async already, since sw timer may be cancelled - * during injecting intr async in function kvm_acquire_timer + * during injecting intr async */ kvm_queue_irq(vcpu, INT_TI); } @@ -140,11 +132,9 @@ static void _kvm_save_timer(struct kvm_vcpu *vcpu) vcpu->arch.expire = expire; if (ticks) { /* - * Update hrtimer to use new timeout * HRTIMER_MODE_PINNED is suggested since vcpu may run in * the same physical cpu in next time */ - hrtimer_cancel(&vcpu->arch.swtimer); hrtimer_start(&vcpu->arch.swtimer, expire, HRTIMER_MODE_ABS_PINNED); } else if (vcpu->stat.generic.blocking) { /* diff --git a/arch/loongarch/kvm/vcpu.c b/arch/loongarch/kvm/vcpu.c index 54f544b30f32..53fcef8b24a1 100644 --- a/arch/loongarch/kvm/vcpu.c +++ b/arch/loongarch/kvm/vcpu.c @@ -95,7 +95,6 @@ static int kvm_pre_enter_guest(struct kvm_vcpu *vcpu) * check vmid before vcpu enter guest */ local_irq_disable(); - kvm_acquire_timer(vcpu); kvm_deliver_intr(vcpu); kvm_deliver_exception(vcpu); /* Make sure the vcpu mode has been written */ @@ -251,23 +250,6 @@ int kvm_arch_vcpu_ioctl_set_guest_debug(struct kvm_vcpu *vcpu, return -EINVAL; } -/** - * kvm_migrate_count() - Migrate timer. - * @vcpu: Virtual CPU. - * - * Migrate hrtimer to the current CPU by cancelling and restarting it - * if the hrtimer is active. - * - * Must be called when the vCPU is migrated to a different CPU, so that - * the timer can interrupt the guest at the new CPU, and the timer irq can - * be delivered to the vCPU. - */ -static void kvm_migrate_count(struct kvm_vcpu *vcpu) -{ - if (hrtimer_cancel(&vcpu->arch.swtimer)) - hrtimer_restart(&vcpu->arch.swtimer); -} - static int _kvm_getcsr(struct kvm_vcpu *vcpu, unsigned int id, u64 *val) { unsigned long gintc; @@ -796,17 +778,6 @@ void kvm_arch_vcpu_load(struct kvm_vcpu *vcpu, int cpu) unsigned long flags; local_irq_save(flags); - if (vcpu->arch.last_sched_cpu != cpu) { - kvm_debug("[%d->%d]KVM vCPU[%d] switch\n", - vcpu->arch.last_sched_cpu, cpu, vcpu->vcpu_id); - /* - * Migrate the timer interrupt to the current CPU so that it - * always interrupts the guest and synchronously triggers a - * guest timer interrupt. - */ - kvm_migrate_count(vcpu); - } - /* Restore guest state to registers */ _kvm_vcpu_load(vcpu, cpu); local_irq_restore(flags); -- cgit v1.2.3 From 5b3d524993ff1fb36089be850ccb121ac3296bcf Mon Sep 17 00:00:00 2001 From: Bibo Mao Date: Tue, 19 Dec 2023 10:48:28 +0800 Subject: LoongArch: KVM: Fix timer emulation with oneshot mode When timer is fired in oneshot mode, CSR TVAL will be -1 rather than 0. There needs special handing for this situation. There are two scenarios when oneshot timer is fired. One scenario is that time is fired after exiting to host, CSR TVAL is set with 0 in order to inject hw interrupt, and -1 will assigned to CSR TVAL soon. The other situation is that timer is fired in VM and guest kernel is hanlding timer IRQ, IRQ is acked and is ready to set next expired timer value, then vm exits to host. Timer interrupt should not be inject at this point, else there will be spurious timer interrupt. Here hw timer irq status in CSR ESTAT is used to judge these two scenarios. If CSR TVAL is -1, the oneshot timer is fired; and if timer hw irq is on in CSR ESTAT register, it happens after exiting to host; else if timer hw irq is off, we think that it happens in vm and timer IRQ handler has already acked IRQ. With this patch, runltp with version ltp20230516 passes to run in vm. Signed-off-by: Bibo Mao Signed-off-by: Huacai Chen --- arch/loongarch/kvm/timer.c | 68 +++++++++++++++++++++++++++++++++++++--------- 1 file changed, 55 insertions(+), 13 deletions(-) diff --git a/arch/loongarch/kvm/timer.c b/arch/loongarch/kvm/timer.c index d362d87a54aa..111328f60872 100644 --- a/arch/loongarch/kvm/timer.c +++ b/arch/loongarch/kvm/timer.c @@ -69,14 +69,19 @@ void kvm_init_timer(struct kvm_vcpu *vcpu, unsigned long timer_hz) */ void kvm_restore_timer(struct kvm_vcpu *vcpu) { - unsigned long cfg, delta, period; + unsigned long cfg, estat; + unsigned long ticks, delta, period; ktime_t expire, now; struct loongarch_csrs *csr = vcpu->arch.csr; /* * Set guest stable timer cfg csr + * Disable timer before restore estat CSR register, avoid to + * get invalid timer interrupt for old timer cfg */ cfg = kvm_read_sw_gcsr(csr, LOONGARCH_CSR_TCFG); + + write_gcsr_timercfg(0); kvm_restore_hw_gcsr(csr, LOONGARCH_CSR_ESTAT); kvm_restore_hw_gcsr(csr, LOONGARCH_CSR_TCFG); if (!(cfg & CSR_TCFG_EN)) { @@ -90,20 +95,47 @@ void kvm_restore_timer(struct kvm_vcpu *vcpu) */ hrtimer_cancel(&vcpu->arch.swtimer); + /* + * From LoongArch Reference Manual Volume 1 Chapter 7.6.2 + * If oneshot timer is fired, CSR TVAL will be -1, there are two + * conditions: + * 1) timer is fired during exiting to host + * 2) timer is fired and vm is doing timer irq, and then exiting to + * host. Host should not inject timer irq to avoid spurious + * timer interrupt again + */ + ticks = kvm_read_sw_gcsr(csr, LOONGARCH_CSR_TVAL); + estat = kvm_read_sw_gcsr(csr, LOONGARCH_CSR_ESTAT); + if (!(cfg & CSR_TCFG_PERIOD) && (ticks > cfg)) { + /* + * Writing 0 to LOONGARCH_CSR_TVAL will inject timer irq + * and set CSR TVAL with -1 + */ + write_gcsr_timertick(0); + + /* + * Writing CSR_TINTCLR_TI to LOONGARCH_CSR_TINTCLR will clear + * timer interrupt, and CSR TVAL keeps unchanged with -1, it + * avoids spurious timer interrupt + */ + if (!(estat & CPU_TIMER)) + gcsr_write(CSR_TINTCLR_TI, LOONGARCH_CSR_TINTCLR); + return; + } + /* * Set remainder tick value if not expired */ + delta = 0; now = ktime_get(); expire = vcpu->arch.expire; if (ktime_before(now, expire)) delta = ktime_to_tick(vcpu, ktime_sub(expire, now)); - else { - if (cfg & CSR_TCFG_PERIOD) { - period = cfg & CSR_TCFG_VAL; - delta = ktime_to_tick(vcpu, ktime_sub(now, expire)); - delta = period - (delta % period); - } else - delta = 0; + else if (cfg & CSR_TCFG_PERIOD) { + period = cfg & CSR_TCFG_VAL; + delta = ktime_to_tick(vcpu, ktime_sub(now, expire)); + delta = period - (delta % period); + /* * Inject timer here though sw timer should inject timer * interrupt async already, since sw timer may be cancelled @@ -122,15 +154,25 @@ void kvm_restore_timer(struct kvm_vcpu *vcpu) */ static void _kvm_save_timer(struct kvm_vcpu *vcpu) { - unsigned long ticks, delta; + unsigned long ticks, delta, cfg; ktime_t expire; struct loongarch_csrs *csr = vcpu->arch.csr; + cfg = kvm_read_sw_gcsr(csr, LOONGARCH_CSR_TCFG); ticks = kvm_read_sw_gcsr(csr, LOONGARCH_CSR_TVAL); - delta = tick_to_ns(vcpu, ticks); - expire = ktime_add_ns(ktime_get(), delta); - vcpu->arch.expire = expire; - if (ticks) { + + /* + * From LoongArch Reference Manual Volume 1 Chapter 7.6.2 + * If period timer is fired, CSR TVAL will be reloaded from CSR TCFG + * If oneshot timer is fired, CSR TVAL will be -1 + * Here judge one-shot timer fired by checking whether TVAL is larger + * than TCFG + */ + if (ticks < cfg) { + delta = tick_to_ns(vcpu, ticks); + expire = ktime_add_ns(ktime_get(), delta); + vcpu->arch.expire = expire; + /* * HRTIMER_MODE_PINNED is suggested since vcpu may run in * the same physical cpu in next time -- cgit v1.2.3 From db1ecca22edf27c5a3dd66af406c88b5b5ac7cc1 Mon Sep 17 00:00:00 2001 From: Tianrui Zhao Date: Tue, 19 Dec 2023 10:48:28 +0800 Subject: LoongArch: KVM: Add LSX (128bit SIMD) support This patch adds LSX (128bit SIMD) support for LoongArch KVM. There will be LSX exception in KVM when guest use the LSX instructions. KVM will enable LSX and restore the vector registers for guest and then return to guest to continue running. Signed-off-by: Tianrui Zhao Signed-off-by: Huacai Chen --- arch/loongarch/include/asm/kvm_host.h | 15 ++- arch/loongarch/include/asm/kvm_vcpu.h | 10 ++ arch/loongarch/include/uapi/asm/kvm.h | 1 + arch/loongarch/kernel/fpu.S | 1 + arch/loongarch/kvm/exit.c | 21 ++++ arch/loongarch/kvm/switch.S | 16 +++ arch/loongarch/kvm/trace.h | 4 +- arch/loongarch/kvm/vcpu.c | 220 +++++++++++++++++++++++++++++++++- 8 files changed, 280 insertions(+), 8 deletions(-) diff --git a/arch/loongarch/include/asm/kvm_host.h b/arch/loongarch/include/asm/kvm_host.h index 0e89db020481..b0c5cdd8014c 100644 --- a/arch/loongarch/include/asm/kvm_host.h +++ b/arch/loongarch/include/asm/kvm_host.h @@ -95,8 +95,9 @@ enum emulation_result { }; #define KVM_LARCH_FPU (0x1 << 0) -#define KVM_LARCH_SWCSR_LATEST (0x1 << 1) -#define KVM_LARCH_HWCSR_USABLE (0x1 << 2) +#define KVM_LARCH_LSX (0x1 << 1) +#define KVM_LARCH_SWCSR_LATEST (0x1 << 2) +#define KVM_LARCH_HWCSR_USABLE (0x1 << 3) struct kvm_vcpu_arch { /* @@ -178,6 +179,16 @@ static inline void writel_sw_gcsr(struct loongarch_csrs *csr, int reg, unsigned csr->csrs[reg] = val; } +static inline bool kvm_guest_has_fpu(struct kvm_vcpu_arch *arch) +{ + return arch->cpucfg[2] & CPUCFG2_FP; +} + +static inline bool kvm_guest_has_lsx(struct kvm_vcpu_arch *arch) +{ + return arch->cpucfg[2] & CPUCFG2_LSX; +} + /* Debug: dump vcpu state */ int kvm_arch_vcpu_dump_regs(struct kvm_vcpu *vcpu); diff --git a/arch/loongarch/include/asm/kvm_vcpu.h b/arch/loongarch/include/asm/kvm_vcpu.h index 0e87652f780a..db08dd46b525 100644 --- a/arch/loongarch/include/asm/kvm_vcpu.h +++ b/arch/loongarch/include/asm/kvm_vcpu.h @@ -55,6 +55,16 @@ void kvm_save_fpu(struct loongarch_fpu *fpu); void kvm_restore_fpu(struct loongarch_fpu *fpu); void kvm_restore_fcsr(struct loongarch_fpu *fpu); +#ifdef CONFIG_CPU_HAS_LSX +int kvm_own_lsx(struct kvm_vcpu *vcpu); +void kvm_save_lsx(struct loongarch_fpu *fpu); +void kvm_restore_lsx(struct loongarch_fpu *fpu); +#else +static inline int kvm_own_lsx(struct kvm_vcpu *vcpu) { } +static inline void kvm_save_lsx(struct loongarch_fpu *fpu) { } +static inline void kvm_restore_lsx(struct loongarch_fpu *fpu) { } +#endif + void kvm_init_timer(struct kvm_vcpu *vcpu, unsigned long hz); void kvm_reset_timer(struct kvm_vcpu *vcpu); void kvm_save_timer(struct kvm_vcpu *vcpu); diff --git a/arch/loongarch/include/uapi/asm/kvm.h b/arch/loongarch/include/uapi/asm/kvm.h index c6ad2ee6106c..923d0bd38294 100644 --- a/arch/loongarch/include/uapi/asm/kvm.h +++ b/arch/loongarch/include/uapi/asm/kvm.h @@ -79,6 +79,7 @@ struct kvm_fpu { #define LOONGARCH_REG_64(TYPE, REG) (TYPE | KVM_REG_SIZE_U64 | (REG << LOONGARCH_REG_SHIFT)) #define KVM_IOC_CSRID(REG) LOONGARCH_REG_64(KVM_REG_LOONGARCH_CSR, REG) #define KVM_IOC_CPUCFG(REG) LOONGARCH_REG_64(KVM_REG_LOONGARCH_CPUCFG, REG) +#define KVM_LOONGARCH_VCPU_CPUCFG 0 struct kvm_debug_exit_arch { }; diff --git a/arch/loongarch/kernel/fpu.S b/arch/loongarch/kernel/fpu.S index d53ab10f4644..a400924c0348 100644 --- a/arch/loongarch/kernel/fpu.S +++ b/arch/loongarch/kernel/fpu.S @@ -349,6 +349,7 @@ SYM_FUNC_START(_restore_lsx_upper) lsx_restore_all_upper a0 t0 t1 jr ra SYM_FUNC_END(_restore_lsx_upper) +EXPORT_SYMBOL(_restore_lsx_upper) SYM_FUNC_START(_init_lsx_upper) lsx_init_all_upper t1 diff --git a/arch/loongarch/kvm/exit.c b/arch/loongarch/kvm/exit.c index e708a1786d6b..676f7a3a335c 100644 --- a/arch/loongarch/kvm/exit.c +++ b/arch/loongarch/kvm/exit.c @@ -634,6 +634,11 @@ static int kvm_handle_fpu_disabled(struct kvm_vcpu *vcpu) { struct kvm_run *run = vcpu->run; + if (!kvm_guest_has_fpu(&vcpu->arch)) { + kvm_queue_exception(vcpu, EXCCODE_INE, 0); + return RESUME_GUEST; + } + /* * If guest FPU not present, the FPU operation should have been * treated as a reserved instruction! @@ -650,6 +655,21 @@ static int kvm_handle_fpu_disabled(struct kvm_vcpu *vcpu) return RESUME_GUEST; } +/* + * kvm_handle_lsx_disabled() - Guest used LSX while disabled in root. + * @vcpu: Virtual CPU context. + * + * Handle when the guest attempts to use LSX when it is disabled in the root + * context. + */ +static int kvm_handle_lsx_disabled(struct kvm_vcpu *vcpu) +{ + if (kvm_own_lsx(vcpu)) + kvm_queue_exception(vcpu, EXCCODE_INE, 0); + + return RESUME_GUEST; +} + /* * LoongArch KVM callback handling for unimplemented guest exiting */ @@ -678,6 +698,7 @@ static exit_handle_fn kvm_fault_tables[EXCCODE_INT_START] = { [EXCCODE_TLBS] = kvm_handle_write_fault, [EXCCODE_TLBM] = kvm_handle_write_fault, [EXCCODE_FPDIS] = kvm_handle_fpu_disabled, + [EXCCODE_LSXDIS] = kvm_handle_lsx_disabled, [EXCCODE_GSPR] = kvm_handle_gspr, }; diff --git a/arch/loongarch/kvm/switch.S b/arch/loongarch/kvm/switch.S index 0ed9040307b7..00fbf772d16f 100644 --- a/arch/loongarch/kvm/switch.S +++ b/arch/loongarch/kvm/switch.S @@ -245,6 +245,22 @@ SYM_FUNC_START(kvm_restore_fpu) jr ra SYM_FUNC_END(kvm_restore_fpu) +#ifdef CONFIG_CPU_HAS_LSX +SYM_FUNC_START(kvm_save_lsx) + fpu_save_csr a0 t1 + fpu_save_cc a0 t1 t2 + lsx_save_data a0 t1 + jr ra +SYM_FUNC_END(kvm_save_lsx) + +SYM_FUNC_START(kvm_restore_lsx) + lsx_restore_data a0 t1 + fpu_restore_cc a0 t1 t2 + fpu_restore_csr a0 t1 t2 + jr ra +SYM_FUNC_END(kvm_restore_lsx) +#endif + .section ".rodata" SYM_DATA(kvm_exception_size, .quad kvm_exc_entry_end - kvm_exc_entry) SYM_DATA(kvm_enter_guest_size, .quad kvm_enter_guest_end - kvm_enter_guest) diff --git a/arch/loongarch/kvm/trace.h b/arch/loongarch/kvm/trace.h index a1e35d655418..7da4e230e896 100644 --- a/arch/loongarch/kvm/trace.h +++ b/arch/loongarch/kvm/trace.h @@ -102,6 +102,7 @@ TRACE_EVENT(kvm_exit_gspr, #define KVM_TRACE_AUX_DISCARD 4 #define KVM_TRACE_AUX_FPU 1 +#define KVM_TRACE_AUX_LSX 2 #define kvm_trace_symbol_aux_op \ { KVM_TRACE_AUX_SAVE, "save" }, \ @@ -111,7 +112,8 @@ TRACE_EVENT(kvm_exit_gspr, { KVM_TRACE_AUX_DISCARD, "discard" } #define kvm_trace_symbol_aux_state \ - { KVM_TRACE_AUX_FPU, "FPU" } + { KVM_TRACE_AUX_FPU, "FPU" }, \ + { KVM_TRACE_AUX_LSX, "LSX" } TRACE_EVENT(kvm_aux, TP_PROTO(struct kvm_vcpu *vcpu, unsigned int op, diff --git a/arch/loongarch/kvm/vcpu.c b/arch/loongarch/kvm/vcpu.c index 53fcef8b24a1..80487d177ca4 100644 --- a/arch/loongarch/kvm/vcpu.c +++ b/arch/loongarch/kvm/vcpu.c @@ -298,6 +298,69 @@ static int _kvm_setcsr(struct kvm_vcpu *vcpu, unsigned int id, u64 val) return ret; } +static int _kvm_get_cpucfg(int id, u64 *v) +{ + int ret = 0; + + if (id < 0 && id >= KVM_MAX_CPUCFG_REGS) + return -EINVAL; + + switch (id) { + case 2: + /* Return CPUCFG2 features which have been supported by KVM */ + *v = CPUCFG2_FP | CPUCFG2_FPSP | CPUCFG2_FPDP | + CPUCFG2_FPVERS | CPUCFG2_LLFTP | CPUCFG2_LLFTPREV | + CPUCFG2_LAM; + /* + * If LSX is supported by CPU, it is also supported by KVM, + * as we implement it. + */ + if (cpu_has_lsx) + *v |= CPUCFG2_LSX; + break; + default: + ret = -EINVAL; + break; + } + return ret; +} + +static int kvm_check_cpucfg(int id, u64 val) +{ + u64 mask; + int ret = 0; + + if (id < 0 && id >= KVM_MAX_CPUCFG_REGS) + return -EINVAL; + + if (_kvm_get_cpucfg(id, &mask)) + return ret; + + switch (id) { + case 2: + /* CPUCFG2 features checking */ + if (val & ~mask) + /* The unsupported features should not be set */ + ret = -EINVAL; + else if (!(val & CPUCFG2_LLFTP)) + /* The LLFTP must be set, as guest must has a constant timer */ + ret = -EINVAL; + else if ((val & CPUCFG2_FP) && (!(val & CPUCFG2_FPSP) || !(val & CPUCFG2_FPDP))) + /* Single and double float point must both be set when enable FP */ + ret = -EINVAL; + else if ((val & CPUCFG2_LSX) && !(val & CPUCFG2_FP)) + /* FP should be set when enable LSX */ + ret = -EINVAL; + else if ((val & CPUCFG2_LASX) && !(val & CPUCFG2_LSX)) + /* LSX, FP should be set when enable LASX, and FP has been checked before. */ + ret = -EINVAL; + break; + default: + break; + } + return ret; +} + static int kvm_get_one_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg, u64 *v) { @@ -367,10 +430,10 @@ static int kvm_set_one_reg(struct kvm_vcpu *vcpu, break; case KVM_REG_LOONGARCH_CPUCFG: id = KVM_GET_IOC_CPUCFG_IDX(reg->id); - if (id >= 0 && id < KVM_MAX_CPUCFG_REGS) - vcpu->arch.cpucfg[id] = (u32)v; - else - ret = -EINVAL; + ret = kvm_check_cpucfg(id, v); + if (ret) + break; + vcpu->arch.cpucfg[id] = (u32)v; break; case KVM_REG_LOONGARCH_KVM: switch (reg->id) { @@ -460,10 +523,94 @@ static int kvm_vcpu_ioctl_enable_cap(struct kvm_vcpu *vcpu, return -EINVAL; } +static int kvm_loongarch_cpucfg_has_attr(struct kvm_vcpu *vcpu, + struct kvm_device_attr *attr) +{ + switch (attr->attr) { + case 2: + return 0; + default: + return -ENXIO; + } + + return -ENXIO; +} + +static int kvm_loongarch_vcpu_has_attr(struct kvm_vcpu *vcpu, + struct kvm_device_attr *attr) +{ + int ret = -ENXIO; + + switch (attr->group) { + case KVM_LOONGARCH_VCPU_CPUCFG: + ret = kvm_loongarch_cpucfg_has_attr(vcpu, attr); + break; + default: + break; + } + + return ret; +} + +static int kvm_loongarch_get_cpucfg_attr(struct kvm_vcpu *vcpu, + struct kvm_device_attr *attr) +{ + int ret = 0; + uint64_t val; + uint64_t __user *uaddr = (uint64_t __user *)attr->addr; + + ret = _kvm_get_cpucfg(attr->attr, &val); + if (ret) + return ret; + + put_user(val, uaddr); + + return ret; +} + +static int kvm_loongarch_vcpu_get_attr(struct kvm_vcpu *vcpu, + struct kvm_device_attr *attr) +{ + int ret = -ENXIO; + + switch (attr->group) { + case KVM_LOONGARCH_VCPU_CPUCFG: + ret = kvm_loongarch_get_cpucfg_attr(vcpu, attr); + break; + default: + break; + } + + return ret; +} + +static int kvm_loongarch_cpucfg_set_attr(struct kvm_vcpu *vcpu, + struct kvm_device_attr *attr) +{ + return -ENXIO; +} + +static int kvm_loongarch_vcpu_set_attr(struct kvm_vcpu *vcpu, + struct kvm_device_attr *attr) +{ + int ret = -ENXIO; + + switch (attr->group) { + case KVM_LOONGARCH_VCPU_CPUCFG: + ret = kvm_loongarch_cpucfg_set_attr(vcpu, attr); + break; + default: + break; + } + + return ret; +} + long kvm_arch_vcpu_ioctl(struct file *filp, unsigned int ioctl, unsigned long arg) { long r; + struct kvm_device_attr attr; void __user *argp = (void __user *)arg; struct kvm_vcpu *vcpu = filp->private_data; @@ -503,6 +650,27 @@ long kvm_arch_vcpu_ioctl(struct file *filp, r = kvm_vcpu_ioctl_enable_cap(vcpu, &cap); break; } + case KVM_HAS_DEVICE_ATTR: { + r = -EFAULT; + if (copy_from_user(&attr, argp, sizeof(attr))) + break; + r = kvm_loongarch_vcpu_has_attr(vcpu, &attr); + break; + } + case KVM_GET_DEVICE_ATTR: { + r = -EFAULT; + if (copy_from_user(&attr, argp, sizeof(attr))) + break; + r = kvm_loongarch_vcpu_get_attr(vcpu, &attr); + break; + } + case KVM_SET_DEVICE_ATTR: { + r = -EFAULT; + if (copy_from_user(&attr, argp, sizeof(attr))) + break; + r = kvm_loongarch_vcpu_set_attr(vcpu, &attr); + break; + } default: r = -ENOIOCTLCMD; break; @@ -550,12 +718,54 @@ void kvm_own_fpu(struct kvm_vcpu *vcpu) preempt_enable(); } +#ifdef CONFIG_CPU_HAS_LSX +/* Enable LSX and restore context */ +int kvm_own_lsx(struct kvm_vcpu *vcpu) +{ + if (!kvm_guest_has_fpu(&vcpu->arch) || !kvm_guest_has_lsx(&vcpu->arch)) + return -EINVAL; + + preempt_disable(); + + /* Enable LSX for guest */ + set_csr_euen(CSR_EUEN_LSXEN | CSR_EUEN_FPEN); + switch (vcpu->arch.aux_inuse & KVM_LARCH_FPU) { + case KVM_LARCH_FPU: + /* + * Guest FPU state already loaded, + * only restore upper LSX state + */ + _restore_lsx_upper(&vcpu->arch.fpu); + break; + default: + /* Neither FP or LSX already active, + * restore full LSX state + */ + kvm_restore_lsx(&vcpu->arch.fpu); + break; + } + + trace_kvm_aux(vcpu, KVM_TRACE_AUX_RESTORE, KVM_TRACE_AUX_LSX); + vcpu->arch.aux_inuse |= KVM_LARCH_LSX | KVM_LARCH_FPU; + preempt_enable(); + + return 0; +} +#endif + /* Save context and disable FPU */ void kvm_lose_fpu(struct kvm_vcpu *vcpu) { preempt_disable(); - if (vcpu->arch.aux_inuse & KVM_LARCH_FPU) { + if (vcpu->arch.aux_inuse & KVM_LARCH_LSX) { + kvm_save_lsx(&vcpu->arch.fpu); + vcpu->arch.aux_inuse &= ~(KVM_LARCH_LSX | KVM_LARCH_FPU); + trace_kvm_aux(vcpu, KVM_TRACE_AUX_SAVE, KVM_TRACE_AUX_LSX); + + /* Disable LSX & FPU */ + clear_csr_euen(CSR_EUEN_FPEN | CSR_EUEN_LSXEN); + } else if (vcpu->arch.aux_inuse & KVM_LARCH_FPU) { kvm_save_fpu(&vcpu->arch.fpu); vcpu->arch.aux_inuse &= ~KVM_LARCH_FPU; trace_kvm_aux(vcpu, KVM_TRACE_AUX_SAVE, KVM_TRACE_AUX_FPU); -- cgit v1.2.3 From 118e10cd893d57df55b3302dfd188a981b6e6d1c Mon Sep 17 00:00:00 2001 From: Tianrui Zhao Date: Tue, 19 Dec 2023 10:48:28 +0800 Subject: LoongArch: KVM: Add LASX (256bit SIMD) support This patch adds LASX (256bit SIMD) support for LoongArch KVM. There will be LASX exception in KVM when guest use the LASX instructions. KVM will enable LASX and restore the vector registers for guest and then return to guest to continue running. Reviewed-by: Bibo Mao Signed-off-by: Tianrui Zhao Signed-off-by: Huacai Chen --- arch/loongarch/include/asm/kvm_host.h | 10 +++++-- arch/loongarch/include/asm/kvm_vcpu.h | 10 +++++++ arch/loongarch/kernel/fpu.S | 1 + arch/loongarch/kvm/exit.c | 16 +++++++++++ arch/loongarch/kvm/switch.S | 15 +++++++++++ arch/loongarch/kvm/trace.h | 4 ++- arch/loongarch/kvm/vcpu.c | 51 ++++++++++++++++++++++++++++++++++- 7 files changed, 103 insertions(+), 4 deletions(-) diff --git a/arch/loongarch/include/asm/kvm_host.h b/arch/loongarch/include/asm/kvm_host.h index b0c5cdd8014c..5bdb34b2c5d6 100644 --- a/arch/loongarch/include/asm/kvm_host.h +++ b/arch/loongarch/include/asm/kvm_host.h @@ -96,8 +96,9 @@ enum emulation_result { #define KVM_LARCH_FPU (0x1 << 0) #define KVM_LARCH_LSX (0x1 << 1) -#define KVM_LARCH_SWCSR_LATEST (0x1 << 2) -#define KVM_LARCH_HWCSR_USABLE (0x1 << 3) +#define KVM_LARCH_LASX (0x1 << 2) +#define KVM_LARCH_SWCSR_LATEST (0x1 << 3) +#define KVM_LARCH_HWCSR_USABLE (0x1 << 4) struct kvm_vcpu_arch { /* @@ -189,6 +190,11 @@ static inline bool kvm_guest_has_lsx(struct kvm_vcpu_arch *arch) return arch->cpucfg[2] & CPUCFG2_LSX; } +static inline bool kvm_guest_has_lasx(struct kvm_vcpu_arch *arch) +{ + return arch->cpucfg[2] & CPUCFG2_LASX; +} + /* Debug: dump vcpu state */ int kvm_arch_vcpu_dump_regs(struct kvm_vcpu *vcpu); diff --git a/arch/loongarch/include/asm/kvm_vcpu.h b/arch/loongarch/include/asm/kvm_vcpu.h index db08dd46b525..e71ceb88f29e 100644 --- a/arch/loongarch/include/asm/kvm_vcpu.h +++ b/arch/loongarch/include/asm/kvm_vcpu.h @@ -65,6 +65,16 @@ static inline void kvm_save_lsx(struct loongarch_fpu *fpu) { } static inline void kvm_restore_lsx(struct loongarch_fpu *fpu) { } #endif +#ifdef CONFIG_CPU_HAS_LASX +int kvm_own_lasx(struct kvm_vcpu *vcpu); +void kvm_save_lasx(struct loongarch_fpu *fpu); +void kvm_restore_lasx(struct loongarch_fpu *fpu); +#else +static inline int kvm_own_lasx(struct kvm_vcpu *vcpu) { } +static inline void kvm_save_lasx(struct loongarch_fpu *fpu) { } +static inline void kvm_restore_lasx(struct loongarch_fpu *fpu) { } +#endif + void kvm_init_timer(struct kvm_vcpu *vcpu, unsigned long hz); void kvm_reset_timer(struct kvm_vcpu *vcpu); void kvm_save_timer(struct kvm_vcpu *vcpu); diff --git a/arch/loongarch/kernel/fpu.S b/arch/loongarch/kernel/fpu.S index a400924c0348..4382e36ae3d4 100644 --- a/arch/loongarch/kernel/fpu.S +++ b/arch/loongarch/kernel/fpu.S @@ -385,6 +385,7 @@ SYM_FUNC_START(_restore_lasx_upper) lasx_restore_all_upper a0 t0 t1 jr ra SYM_FUNC_END(_restore_lasx_upper) +EXPORT_SYMBOL(_restore_lasx_upper) SYM_FUNC_START(_init_lasx_upper) lasx_init_all_upper t1 diff --git a/arch/loongarch/kvm/exit.c b/arch/loongarch/kvm/exit.c index 676f7a3a335c..ed1d89d53e2e 100644 --- a/arch/loongarch/kvm/exit.c +++ b/arch/loongarch/kvm/exit.c @@ -670,6 +670,21 @@ static int kvm_handle_lsx_disabled(struct kvm_vcpu *vcpu) return RESUME_GUEST; } +/* + * kvm_handle_lasx_disabled() - Guest used LASX while disabled in root. + * @vcpu: Virtual CPU context. + * + * Handle when the guest attempts to use LASX when it is disabled in the root + * context. + */ +static int kvm_handle_lasx_disabled(struct kvm_vcpu *vcpu) +{ + if (kvm_own_lasx(vcpu)) + kvm_queue_exception(vcpu, EXCCODE_INE, 0); + + return RESUME_GUEST; +} + /* * LoongArch KVM callback handling for unimplemented guest exiting */ @@ -699,6 +714,7 @@ static exit_handle_fn kvm_fault_tables[EXCCODE_INT_START] = { [EXCCODE_TLBM] = kvm_handle_write_fault, [EXCCODE_FPDIS] = kvm_handle_fpu_disabled, [EXCCODE_LSXDIS] = kvm_handle_lsx_disabled, + [EXCCODE_LASXDIS] = kvm_handle_lasx_disabled, [EXCCODE_GSPR] = kvm_handle_gspr, }; diff --git a/arch/loongarch/kvm/switch.S b/arch/loongarch/kvm/switch.S index 00fbf772d16f..ba976509bfe8 100644 --- a/arch/loongarch/kvm/switch.S +++ b/arch/loongarch/kvm/switch.S @@ -261,6 +261,21 @@ SYM_FUNC_START(kvm_restore_lsx) SYM_FUNC_END(kvm_restore_lsx) #endif +#ifdef CONFIG_CPU_HAS_LASX +SYM_FUNC_START(kvm_save_lasx) + fpu_save_csr a0 t1 + fpu_save_cc a0 t1 t2 + lasx_save_data a0 t1 + jr ra +SYM_FUNC_END(kvm_save_lasx) + +SYM_FUNC_START(kvm_restore_lasx) + lasx_restore_data a0 t1 + fpu_restore_cc a0 t1 t2 + fpu_restore_csr a0 t1 t2 + jr ra +SYM_FUNC_END(kvm_restore_lasx) +#endif .section ".rodata" SYM_DATA(kvm_exception_size, .quad kvm_exc_entry_end - kvm_exc_entry) SYM_DATA(kvm_enter_guest_size, .quad kvm_enter_guest_end - kvm_enter_guest) diff --git a/arch/loongarch/kvm/trace.h b/arch/loongarch/kvm/trace.h index 7da4e230e896..c2484ad4cffa 100644 --- a/arch/loongarch/kvm/trace.h +++ b/arch/loongarch/kvm/trace.h @@ -103,6 +103,7 @@ TRACE_EVENT(kvm_exit_gspr, #define KVM_TRACE_AUX_FPU 1 #define KVM_TRACE_AUX_LSX 2 +#define KVM_TRACE_AUX_LASX 3 #define kvm_trace_symbol_aux_op \ { KVM_TRACE_AUX_SAVE, "save" }, \ @@ -113,7 +114,8 @@ TRACE_EVENT(kvm_exit_gspr, #define kvm_trace_symbol_aux_state \ { KVM_TRACE_AUX_FPU, "FPU" }, \ - { KVM_TRACE_AUX_LSX, "LSX" } + { KVM_TRACE_AUX_LSX, "LSX" }, \ + { KVM_TRACE_AUX_LASX, "LASX" } TRACE_EVENT(kvm_aux, TP_PROTO(struct kvm_vcpu *vcpu, unsigned int op, diff --git a/arch/loongarch/kvm/vcpu.c b/arch/loongarch/kvm/vcpu.c index 80487d177ca4..27701991886d 100644 --- a/arch/loongarch/kvm/vcpu.c +++ b/arch/loongarch/kvm/vcpu.c @@ -317,6 +317,13 @@ static int _kvm_get_cpucfg(int id, u64 *v) */ if (cpu_has_lsx) *v |= CPUCFG2_LSX; + /* + * if LASX is supported by CPU, it is also supported by KVM, + * as we implement it. + */ + if (cpu_has_lasx) + *v |= CPUCFG2_LASX; + break; default: ret = -EINVAL; @@ -753,12 +760,54 @@ int kvm_own_lsx(struct kvm_vcpu *vcpu) } #endif +#ifdef CONFIG_CPU_HAS_LASX +/* Enable LASX and restore context */ +int kvm_own_lasx(struct kvm_vcpu *vcpu) +{ + if (!kvm_guest_has_fpu(&vcpu->arch) || !kvm_guest_has_lsx(&vcpu->arch) || !kvm_guest_has_lasx(&vcpu->arch)) + return -EINVAL; + + preempt_disable(); + + set_csr_euen(CSR_EUEN_FPEN | CSR_EUEN_LSXEN | CSR_EUEN_LASXEN); + switch (vcpu->arch.aux_inuse & (KVM_LARCH_FPU | KVM_LARCH_LSX)) { + case KVM_LARCH_LSX: + case KVM_LARCH_LSX | KVM_LARCH_FPU: + /* Guest LSX state already loaded, only restore upper LASX state */ + _restore_lasx_upper(&vcpu->arch.fpu); + break; + case KVM_LARCH_FPU: + /* Guest FP state already loaded, only restore upper LSX & LASX state */ + _restore_lsx_upper(&vcpu->arch.fpu); + _restore_lasx_upper(&vcpu->arch.fpu); + break; + default: + /* Neither FP or LSX already active, restore full LASX state */ + kvm_restore_lasx(&vcpu->arch.fpu); + break; + } + + trace_kvm_aux(vcpu, KVM_TRACE_AUX_RESTORE, KVM_TRACE_AUX_LASX); + vcpu->arch.aux_inuse |= KVM_LARCH_LASX | KVM_LARCH_LSX | KVM_LARCH_FPU; + preempt_enable(); + + return 0; +} +#endif + /* Save context and disable FPU */ void kvm_lose_fpu(struct kvm_vcpu *vcpu) { preempt_disable(); - if (vcpu->arch.aux_inuse & KVM_LARCH_LSX) { + if (vcpu->arch.aux_inuse & KVM_LARCH_LASX) { + kvm_save_lasx(&vcpu->arch.fpu); + vcpu->arch.aux_inuse &= ~(KVM_LARCH_LSX | KVM_LARCH_FPU | KVM_LARCH_LASX); + trace_kvm_aux(vcpu, KVM_TRACE_AUX_SAVE, KVM_TRACE_AUX_LASX); + + /* Disable LASX & LSX & FPU */ + clear_csr_euen(CSR_EUEN_FPEN | CSR_EUEN_LSXEN | CSR_EUEN_LASXEN); + } else if (vcpu->arch.aux_inuse & KVM_LARCH_LSX) { kvm_save_lsx(&vcpu->arch.fpu); vcpu->arch.aux_inuse &= ~(KVM_LARCH_LSX | KVM_LARCH_FPU); trace_kvm_aux(vcpu, KVM_TRACE_AUX_SAVE, KVM_TRACE_AUX_LSX); -- cgit v1.2.3