From e77eb36472cdc425a3a81356c7b368e59a36da31 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Tue, 5 Aug 2008 13:16:56 +0900 Subject: sh: mach-x3proto: Fix up smc91x platform data. smc91x on x3proto needs 16-bit access and nowait, which we can now do through the platform data. Signed-off-by: Paul Mundt --- arch/sh/boards/mach-x3proto/setup.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/arch/sh/boards/mach-x3proto/setup.c b/arch/sh/boards/mach-x3proto/setup.c index abc5b6d418fe..a70d23b21788 100644 --- a/arch/sh/boards/mach-x3proto/setup.c +++ b/arch/sh/boards/mach-x3proto/setup.c @@ -3,7 +3,7 @@ * * Renesas SH-X3 Prototype Board Support. * - * Copyright (C) 2007 Paul Mundt + * Copyright (C) 2007 - 2008 Paul Mundt * * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive @@ -13,6 +13,7 @@ #include #include #include +#include #include static struct resource heartbeat_resources[] = { @@ -30,6 +31,10 @@ static struct platform_device heartbeat_device = { .resource = heartbeat_resources, }; +static struct smc91x_platdata smc91x_info = { + .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT, +}; + static struct resource smc91x_resources[] = { [0] = { .start = 0x18000300, @@ -47,6 +52,9 @@ static struct platform_device smc91x_device = { .id = -1, .resource = smc91x_resources, .num_resources = ARRAY_SIZE(smc91x_resources), + .dev = { + .platform_data = &smc91x_info, + }, }; static struct resource r8a66597_usb_host_resources[] = { -- cgit v1.2.3 From 7265706c8fd57722f622f336ec110cb35f83e739 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Tue, 5 Aug 2008 18:37:11 +0300 Subject: fix SH7705_CACHE_32KB compilation This patches compile errors like the following caused by commit 51f3547d619956e9b428bfff17004d8f4d259a02 (sh: Allow SH-3 and SH-5 to use common headers): <-- snip --> ... CC arch/sh/mm/init.o /home/bunk/linux/kernel-2.6/git/linux-2.6/arch/sh/mm/init.c: In function 'mem_init': /home/bunk/linux/kernel-2.6/git/linux-2.6/arch/sh/mm/init.c:232: error: implicit declaration of function 'p3_cache_init' make[2]: *** [arch/sh/mm/init.o] Error 1 make[1]: *** [arch/sh/mm] Error 2 ... CC kernel/fork.o /home/bunk/linux/kernel-2.6/git/linux-2.6/kernel/fork.c: In function 'dup_mmap': /home/bunk/linux/kernel-2.6/git/linux-2.6/kernel/fork.c:323: error: implicit declaration of function 'flush_dcache_mmap_lock' /home/bunk/linux/kernel-2.6/git/linux-2.6/kernel/fork.c:325: error: implicit declaration of function 'flush_dcache_mmap_unlock' make[2]: *** [kernel/fork.o] Error 1 <-- snip --> Reported-by: Adrian Bunk Signed-off-by: Adrian Bunk Signed-off-by: Paul Mundt --- arch/sh/include/cpu-sh3/cpu/cacheflush.h | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/arch/sh/include/cpu-sh3/cpu/cacheflush.h b/arch/sh/include/cpu-sh3/cpu/cacheflush.h index abc909880807..1ac27aae6700 100644 --- a/arch/sh/include/cpu-sh3/cpu/cacheflush.h +++ b/arch/sh/include/cpu-sh3/cpu/cacheflush.h @@ -29,6 +29,16 @@ void flush_cache_page(struct vm_area_struct *vma, unsigned long addr, unsigned l void flush_dcache_page(struct page *pg); void flush_icache_range(unsigned long start, unsigned long end); void flush_icache_page(struct vm_area_struct *vma, struct page *page); + +#define flush_dcache_mmap_lock(mapping) do { } while (0) +#define flush_dcache_mmap_unlock(mapping) do { } while (0) + +/* SH3 has unified cache so no special action needed here */ +#define flush_cache_sigtramp(vaddr) do { } while (0) +#define flush_icache_user_range(vma,pg,adr,len) do { } while (0) + +#define p3_cache_init() do { } while (0) + #else #include #endif -- cgit v1.2.3 From d09d328c119a9ac20615fc8b1431aa417955ad4d Mon Sep 17 00:00:00 2001 From: Yoshinori Sato Date: Wed, 6 Aug 2008 14:47:54 +0900 Subject: sh: Don't export __{s,u}divsi3_i4i from SH-2 libgcc. rsk7203_defconfig fails to build with the following error: <-- snip --> ... LD .tmp_vmlinux1 arch/sh/kernel/built-in.o:(__ksymtab+0xb8): undefined reference to `__udivsi3_i4i' arch/sh/kernel/built-in.o:(__ksymtab+0xc8): undefined reference to `__sdivsi3_i4i' make[1]: *** [.tmp_vmlinux1] Error 1 <-- snip --> That worked with 2.6.26, and these are far less undefined references than in the cases where libgcc was missing. [ These symbols are not defined on SH-2 versions of libgcc, so we have to special case the export there. - Paul ] Reported-by: Adrian Bunk Signed-off-by: Yoshinori Sato Signed-off-by: Paul Mundt --- arch/sh/kernel/sh_ksyms_32.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/arch/sh/kernel/sh_ksyms_32.c b/arch/sh/kernel/sh_ksyms_32.c index 8f916536719c..6e1b1c271658 100644 --- a/arch/sh/kernel/sh_ksyms_32.c +++ b/arch/sh/kernel/sh_ksyms_32.c @@ -107,10 +107,12 @@ DECLARE_EXPORT(__movmemSI12_i4); * GCC >= 4.2 emits these for division, as do GCC 4.1.x versions of the ST * compiler which include backported patches. */ -DECLARE_EXPORT(__sdivsi3_i4i); DECLARE_EXPORT(__udiv_qrnnd_16); +#if !defined(CONFIG_CPU_SH2) +DECLARE_EXPORT(__sdivsi3_i4i); DECLARE_EXPORT(__udivsi3_i4i); #endif +#endif #else /* GCC 3.x */ DECLARE_EXPORT(__movstr_i4_even); DECLARE_EXPORT(__movstr_i4_odd); -- cgit v1.2.3 From 68b7c24cf9c699ed93c4a70f958b5bb3943723bc Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Wed, 6 Aug 2008 15:10:49 +0900 Subject: sh: Disable 64kB hugetlbpage size when using 64kB PAGE_SIZE. Presently we oops in mm/hugetlb.c:1325, which is the order == 0 test in hugetlb_add_hstate() called at initialization time. So, disable 64kB huge pages when we're using a 64kB PAGE_SIZE. On most parts this will force the default to be 1MB huge pages. Signed-off-by: Paul Mundt --- arch/sh/mm/Kconfig | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/sh/mm/Kconfig b/arch/sh/mm/Kconfig index 9c131cac91a4..8a03926ea84f 100644 --- a/arch/sh/mm/Kconfig +++ b/arch/sh/mm/Kconfig @@ -181,10 +181,12 @@ config ENTRY_OFFSET choice prompt "HugeTLB page size" depends on HUGETLB_PAGE && (CPU_SH4 || CPU_SH5) && MMU + default HUGETLB_PAGE_SIZE_1MB if PAGE_SIZE_64KB default HUGETLB_PAGE_SIZE_64K config HUGETLB_PAGE_SIZE_64K bool "64kB" + depends on !PAGE_SIZE_64KB config HUGETLB_PAGE_SIZE_256K bool "256kB" -- cgit v1.2.3 From 0a766a6b7dd9f3d15c32d724555d954dc6bb020d Mon Sep 17 00:00:00 2001 From: Nobuhiro Iwamatsu Date: Fri, 8 Aug 2008 14:29:58 +0900 Subject: sh: Add support sh_eth to sh7763rdp board SH7763 has sh_eth device. This patch add sh_eth platform device to this board. Signed-off-by: Nobuhiro Iwamatsu Signed-off-by: Paul Mundt --- arch/sh/boards/mach-sh7763rdp/setup.c | 34 ++++++++++++++++++++++++++++++++-- 1 file changed, 32 insertions(+), 2 deletions(-) diff --git a/arch/sh/boards/mach-sh7763rdp/setup.c b/arch/sh/boards/mach-sh7763rdp/setup.c index 925f16af7121..49940d192d67 100644 --- a/arch/sh/boards/mach-sh7763rdp/setup.c +++ b/arch/sh/boards/mach-sh7763rdp/setup.c @@ -15,8 +15,9 @@ #include #include #include -#include +#include #include +#include /* NOR Flash */ static struct mtd_partition sh7763rdp_nor_flash_partitions[] = { @@ -60,8 +61,36 @@ static struct platform_device sh7763rdp_nor_flash_device = { }, }; +/* SH-Ether */ +static struct resource sh_eth_resources[] = { + { + .start = 0xFEE00800, /* use eth1 */ + .end = 0xFEE00F7C - 1, + .flags = IORESOURCE_MEM, + }, { + .start = 58, /* irq number */ + .end = 58, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct sh_eth_plat_data sh7763_eth_pdata = { + .phy = 1, + .edmac_endian = EDMAC_LITTLE_ENDIAN, +}; + +static struct platform_device sh7763rdp_eth_device = { + .name = "sh-eth", + .resource = sh_eth_resources, + .num_resources = ARRAY_SIZE(sh_eth_resources), + .dev = { + .platform_data = &sh7763_eth_pdata, + }, +}; + static struct platform_device *sh7763rdp_devices[] __initdata = { &sh7763rdp_nor_flash_device, + &sh7763rdp_eth_device, }; static int __init sh7763rdp_devices_setup(void) @@ -69,7 +98,8 @@ static int __init sh7763rdp_devices_setup(void) return platform_add_devices(sh7763rdp_devices, ARRAY_SIZE(sh7763rdp_devices)); } -__initcall(sh7763rdp_devices_setup); + +device_initcall(sh7763rdp_devices_setup); static void __init sh7763rdp_setup(char **cmdline_p) { -- cgit v1.2.3 From 674063c5a5461e39c0eb0b33570d467708ec0ecd Mon Sep 17 00:00:00 2001 From: Nobuhiro Iwamatsu Date: Fri, 8 Aug 2008 14:30:06 +0900 Subject: sh: Add support sh7760fb to sh7763rdp board Add sh7760fb platform device to sh7763rdp's setup. Signed-off-by: Paul Mundt --- arch/sh/boards/mach-sh7763rdp/setup.c | 52 ++++++++++++++++++++++++++++++++++- 1 file changed, 51 insertions(+), 1 deletion(-) diff --git a/arch/sh/boards/mach-sh7763rdp/setup.c b/arch/sh/boards/mach-sh7763rdp/setup.c index 49940d192d67..23850da05e3c 100644 --- a/arch/sh/boards/mach-sh7763rdp/setup.c +++ b/arch/sh/boards/mach-sh7763rdp/setup.c @@ -15,9 +15,11 @@ #include #include #include +#include #include #include #include +#include /* NOR Flash */ static struct mtd_partition sh7763rdp_nor_flash_partitions[] = { @@ -88,9 +90,58 @@ static struct platform_device sh7763rdp_eth_device = { }, }; +/* SH7763 LCDC */ +static struct resource sh7763rdp_fb_resources[] = { + { + .start = 0xFFE80000, + .end = 0xFFE80442 - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct fb_videomode sh7763fb_videomode = { + .refresh = 60, + .name = "VGA Monitor", + .xres = 640, + .yres = 480, + .pixclock = 10000, + .left_margin = 80, + .right_margin = 24, + .upper_margin = 30, + .lower_margin = 1, + .hsync_len = 96, + .vsync_len = 1, + .sync = 0, + .vmode = FB_VMODE_NONINTERLACED, + .flag = FBINFO_FLAG_DEFAULT, +}; + +static struct sh7760fb_platdata sh7763fb_def_pdata = { + .def_mode = &sh7763fb_videomode, + .ldmtr = (LDMTR_TFT_COLOR_16|LDMTR_MCNT), + .lddfr = LDDFR_16BPP_RGB565, + .ldpmmr = 0x0000, + .ldpspr = 0xFFFF, + .ldaclnr = 0x0001, + .ldickr = 0x1102, + .rotate = 0, + .novsync = 0, + .blank = NULL, +}; + +static struct platform_device sh7763rdp_fb_device = { + .name = "sh7760-lcdc", + .resource = sh7763rdp_fb_resources, + .num_resources = ARRAY_SIZE(sh7763rdp_fb_resources), + .dev = { + .platform_data = &sh7763fb_def_pdata, + }, +}; + static struct platform_device *sh7763rdp_devices[] __initdata = { &sh7763rdp_nor_flash_device, &sh7763rdp_eth_device, + &sh7763rdp_fb_device, }; static int __init sh7763rdp_devices_setup(void) @@ -98,7 +149,6 @@ static int __init sh7763rdp_devices_setup(void) return platform_add_devices(sh7763rdp_devices, ARRAY_SIZE(sh7763rdp_devices)); } - device_initcall(sh7763rdp_devices_setup); static void __init sh7763rdp_setup(char **cmdline_p) -- cgit v1.2.3 From a66b44b103755ecad84b4817c4e3253234d2b03d Mon Sep 17 00:00:00 2001 From: Nobuhiro Iwamatsu Date: Fri, 8 Aug 2008 14:30:13 +0900 Subject: sh: Update sh7763rdp defconfig Signed-off-by: Nobuhiro Iwamatsu Signed-off-by: Paul Mundt --- arch/sh/configs/sh7763rdp_defconfig | 113 +++++++++++++++++++++++++++++++----- 1 file changed, 97 insertions(+), 16 deletions(-) diff --git a/arch/sh/configs/sh7763rdp_defconfig b/arch/sh/configs/sh7763rdp_defconfig index 83f3fe5db3e5..baf830c4a7e4 100644 --- a/arch/sh/configs/sh7763rdp_defconfig +++ b/arch/sh/configs/sh7763rdp_defconfig @@ -1,15 +1,17 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc4 -# Fri Jun 6 12:20:17 2008 +# Linux kernel version: 2.6.27-rc2 +# Fri Aug 8 13:44:20 2008 # CONFIG_SUPERH=y CONFIG_SUPERH32=y +CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig" CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_BUG=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_TIME=y @@ -19,7 +21,6 @@ CONFIG_LOCKDEP_SUPPORT=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_ARCH_NO_VIRT_TO_BUS=y -CONFIG_ARCH_SUPPORTS_AOUT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -83,10 +84,16 @@ CONFIG_PROFILING=y # CONFIG_MARKERS is not set CONFIG_OPROFILE=y CONFIG_HAVE_OPROFILE=y +# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set +# CONFIG_HAVE_IOREMAP_PROT is not set # CONFIG_HAVE_KPROBES is not set # CONFIG_HAVE_KRETPROBES is not set +# CONFIG_HAVE_ARCH_TRACEHOOK is not set # CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +CONFIG_HAVE_CLK=y CONFIG_PROC_PAGE_MONITOR=y +CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set @@ -96,12 +103,13 @@ CONFIG_MODULES=y # CONFIG_MODULE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -# CONFIG_KMOD is not set +CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -177,6 +185,7 @@ CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set # CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set +CONFIG_ENTRY_OFFSET=0x00001000 CONFIG_SELECT_MEMORY_MODEL=y # CONFIG_FLATMEM_MANUAL is not set # CONFIG_DISCONTIGMEM_MANUAL is not set @@ -258,6 +267,7 @@ CONFIG_HZ=250 # CONFIG_SCHED_HRTICK is not set # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set +CONFIG_SECCOMP=y CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -282,10 +292,6 @@ CONFIG_CMDLINE="console=ttySC2,115200 root=/dev/sda1 rootdelay=10" # CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set - -# -# Networking -# CONFIG_NET=y # @@ -361,6 +367,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # CONFIG_CFG80211 is not set CONFIG_WIRELESS_EXT=y +CONFIG_WIRELESS_EXT_SYSFS=y # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set # CONFIG_RFKILL is not set @@ -377,6 +384,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_SYS_HYPERVISOR is not set # CONFIG_CONNECTOR is not set CONFIG_MTD=y @@ -471,6 +480,7 @@ CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_RAM is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set # CONFIG_MISC_DEVICES is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -515,10 +525,10 @@ CONFIG_SCSI_WAIT_SCAN=m CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_DH is not set # CONFIG_ATA is not set # CONFIG_MD is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -546,7 +556,9 @@ CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_AX88796 is not set # CONFIG_STNIC is not set +CONFIG_SH_ETH=y # CONFIG_SMC91X is not set +# CONFIG_SMC911X is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set @@ -613,7 +625,11 @@ CONFIG_INPUT=y # # Character devices # -# CONFIG_VT is not set +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set @@ -644,6 +660,7 @@ CONFIG_HW_RANDOM=y # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set # @@ -655,6 +672,7 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set @@ -679,7 +697,34 @@ CONFIG_SSB_POSSIBLE=y # # CONFIG_VGASTATE is not set # CONFIG_VIDEO_OUTPUT_CONTROL is not set -# CONFIG_FB is not set +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +CONFIG_FB_FOREIGN_ENDIAN=y +CONFIG_FB_BOTH_ENDIAN=y +# CONFIG_FB_BIG_ENDIAN is not set +# CONFIG_FB_LITTLE_ENDIAN is not set +# CONFIG_FB_SYS_FOPS is not set +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_SH_MOBILE_LCDC is not set +CONFIG_FB_SH7760=y +# CONFIG_FB_VIRTUAL is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # @@ -688,8 +733,22 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_DISPLAY_SUPPORT is not set # -# Sound -# +# Console display driver support +# +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +# CONFIG_FONTS is not set +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y +CONFIG_LOGO=y +CONFIG_LOGO_LINUX_MONO=y +CONFIG_LOGO_LINUX_VGA16=y +CONFIG_LOGO_LINUX_CLUT224=y +CONFIG_LOGO_SUPERH_MONO=y +CONFIG_LOGO_SUPERH_VGA16=y +CONFIG_LOGO_SUPERH_CLUT224=y # CONFIG_SOUND is not set # CONFIG_HID_SUPPORT is not set CONFIG_USB_SUPPORT=y @@ -788,11 +847,27 @@ CONFIG_USB_MON=y # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_GADGET is not set -# CONFIG_MMC is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y +# CONFIG_SDIO_UART is not set +# CONFIG_MMC_TEST is not set + +# +# MMC/SD Host Controller Drivers +# +# CONFIG_MMC_SDHCI is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set # CONFIG_ACCESSIBILITY is not set # CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set # CONFIG_UIO is not set # @@ -865,6 +940,7 @@ CONFIG_TMPFS_POSIX_ACL=y # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set @@ -874,12 +950,11 @@ CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -949,6 +1024,7 @@ CONFIG_FRAME_WARN=1024 # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set # CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_SAMPLES is not set # CONFIG_SH_STANDARD_BIOS is not set # CONFIG_EARLY_SCIF_CONSOLE is not set @@ -1003,6 +1079,10 @@ CONFIG_CRYPTO=y # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set @@ -1042,6 +1122,7 @@ CONFIG_BITREVERSE=y # CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +CONFIG_CRC_T10DIF=y # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set -- cgit v1.2.3 From 2fc91882c24908f5f785ed094cfe74214c44af8d Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Mon, 11 Aug 2008 14:52:46 +0900 Subject: sh: remove MSTPCR defines from Migo-R header file Remove MSTPCR register definitions from Migo-R header file. The clock frame work should be used instead of direct register access. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/sh/include/asm/migor.h | 3 --- 1 file changed, 3 deletions(-) diff --git a/arch/sh/include/asm/migor.h b/arch/sh/include/asm/migor.h index 10016e0f4a4e..c12b632c540b 100644 --- a/arch/sh/include/asm/migor.h +++ b/arch/sh/include/asm/migor.h @@ -42,9 +42,6 @@ #define PORT_MSELCRB 0xa4050182 -#define MSTPCR1 0xa4150034 -#define MSTPCR2 0xa4150038 - #define PORT_PSELA 0xa405014e #define PORT_PSELB 0xa4050150 #define PORT_PSELC 0xa4050152 -- cgit v1.2.3 From b6ce9ad05f782e6a00aed8432d9513dc394115ce Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Mon, 11 Aug 2008 14:53:49 +0900 Subject: input: migor_ts compile and detection fix The i2c layer got changed while the migor_ts driver was in the input tree waiting to get merged upstream. Fix current compile issue by using struct i2c_client member "name" instead of "driver_name". Also, add id_table to make sure the device gets properly detected. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- drivers/input/touchscreen/migor_ts.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) diff --git a/drivers/input/touchscreen/migor_ts.c b/drivers/input/touchscreen/migor_ts.c index c1cd99d58981..504ca11749a1 100644 --- a/drivers/input/touchscreen/migor_ts.c +++ b/drivers/input/touchscreen/migor_ts.c @@ -173,7 +173,7 @@ static int migor_ts_probe(struct i2c_client *client, input_set_abs_params(input, ABS_X, 95, 955, 0, 0); input_set_abs_params(input, ABS_Y, 85, 935, 0, 0); - input->name = client->driver_name; + input->name = client->name; input->id.bustype = BUS_I2C; input->dev.parent = &client->dev; @@ -192,7 +192,7 @@ static int migor_ts_probe(struct i2c_client *client, goto err1; error = request_irq(priv->irq, migor_ts_isr, IRQF_TRIGGER_LOW, - client->driver_name, priv); + client->name, priv); if (error) { dev_err(&client->dev, "Unable to request touchscreen IRQ.\n"); goto err2; @@ -224,12 +224,19 @@ static int migor_ts_remove(struct i2c_client *client) return 0; } +static const struct i2c_device_id migor_ts_id[] = { + { "migor_ts", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, migor_ts); + static struct i2c_driver migor_ts_driver = { .driver = { .name = "migor_ts", }, .probe = migor_ts_probe, .remove = migor_ts_remove, + .id_table = migor_ts_id, }; static int __init migor_ts_init(void) -- cgit v1.2.3 From 2a5323cd69ff485c1b68960f2b4802cf252558f1 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Mon, 11 Aug 2008 14:59:03 +0900 Subject: sh: export sh7723 VEU as VEU2H Export sh7723 VEU hardware blocks as VEU2H. The sh7723 VEU2H differs a bit from the sh7722 VEU so use different names for our UIO devices. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/sh/kernel/cpu/sh4a/setup-sh7723.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7723.c b/arch/sh/kernel/cpu/sh4a/setup-sh7723.c index cd6baffdc896..a7412cede534 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7723.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7723.c @@ -45,7 +45,7 @@ static struct platform_device vpu_device = { }; static struct uio_info veu0_platform_data = { - .name = "VEU", + .name = "VEU2H", .version = "0", .irq = 54, }; @@ -73,7 +73,7 @@ static struct platform_device veu0_device = { }; static struct uio_info veu1_platform_data = { - .name = "VEU", + .name = "VEU2H", .version = "0", .irq = 27, }; -- cgit v1.2.3 From 0c13bf1e7c98668ce69eaedd215ec32f9e1361ae Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Mon, 11 Aug 2008 15:13:24 +0900 Subject: sh: select memchunk size using kernel cmdline Allow user to pass parameters on kernel command line to override default size for physically contiguous memory buffers. The default VPU buffer size is too small for VGA harware encoding, but instead of just bumping up the number we allow the user to override the default size using the command line. Supports SuperH Mobile hardware blocks such as VEU, VPU and CEU. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/sh/mm/consistent.c | 27 +++++++++++++++++++++++++++ 1 file changed, 27 insertions(+) diff --git a/arch/sh/mm/consistent.c b/arch/sh/mm/consistent.c index b2ce014401b5..895bb3f335c7 100644 --- a/arch/sh/mm/consistent.c +++ b/arch/sh/mm/consistent.c @@ -95,6 +95,29 @@ void dma_cache_sync(struct device *dev, void *vaddr, size_t size, } EXPORT_SYMBOL(dma_cache_sync); +static int __init memchunk_setup(char *str) +{ + return 1; /* accept anything that begins with "memchunk." */ +} +__setup("memchunk.", memchunk_setup); + +static void memchunk_cmdline_override(char *name, unsigned long *sizep) +{ + char *p = boot_command_line; + int k = strlen(name); + + while ((p = strstr(p, "memchunk."))) { + p += 9; /* strlen("memchunk.") */ + if (!strncmp(name, p, k) && p[k] == '=') { + p += k + 1; + *sizep = memparse(p, NULL); + pr_info("%s: forcing memory chunk size to 0x%08lx\n", + name, *sizep); + break; + } + } +} + int platform_resource_setup_memory(struct platform_device *pdev, char *name, unsigned long memsize) { @@ -109,6 +132,10 @@ int platform_resource_setup_memory(struct platform_device *pdev, return -EINVAL; } + memchunk_cmdline_override(name, &memsize); + if (!memsize) + return 0; + buf = dma_alloc_coherent(NULL, memsize, &dma_handle, GFP_KERNEL); if (!buf) { pr_warning("%s: unable to allocate memory\n", name); -- cgit v1.2.3 From ce9c008c8bea25a974d9027b7c6602d535639899 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Mon, 11 Aug 2008 15:26:00 +0900 Subject: video: export sh_mobile_lcdc panel size Export the LCD panel size for sh_mobile_lcdc boards. This allows us to perform dpi and screen aspect ratio calculations in user space. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/sh/boards/board-ap325rxa.c | 4 ++++ arch/sh/boards/mach-migor/setup.c | 8 ++++++++ arch/sh/include/asm/sh_mobile_lcdc.h | 6 ++++++ drivers/video/sh_mobile_lcdcfb.c | 2 ++ 4 files changed, 20 insertions(+) diff --git a/arch/sh/boards/board-ap325rxa.c b/arch/sh/boards/board-ap325rxa.c index 025d4fe55a58..fd1612590bf4 100644 --- a/arch/sh/boards/board-ap325rxa.c +++ b/arch/sh/boards/board-ap325rxa.c @@ -140,6 +140,10 @@ static struct sh_mobile_lcdc_info lcdc_info = { .vsync_len = 1, .sync = 0, /* hsync and vsync are active low */ }, + .lcd_size_cfg = { /* 7.0 inch */ + .width = 152, + .height = 91, + }, .board_cfg = { .display_on = ap320_wvga_power_on, }, diff --git a/arch/sh/boards/mach-migor/setup.c b/arch/sh/boards/mach-migor/setup.c index e499ee384d58..714dce91cc9b 100644 --- a/arch/sh/boards/mach-migor/setup.c +++ b/arch/sh/boards/mach-migor/setup.c @@ -224,6 +224,10 @@ static struct sh_mobile_lcdc_info sh_mobile_lcdc_info = { .vsync_len = 2, .sync = 0, }, + .lcd_size_cfg = { /* 7.0 inch */ + .width = 152, + .height = 91, + }, } #endif #ifdef CONFIG_SH_MIGOR_QVGA @@ -245,6 +249,10 @@ static struct sh_mobile_lcdc_info sh_mobile_lcdc_info = { .vsync_len = 2, .sync = FB_SYNC_HOR_HIGH_ACT, }, + .lcd_size_cfg = { /* 2.4 inch */ + .width = 49, + .height = 37, + }, .board_cfg = { .setup_sys = migor_lcd_qvga_setup, }, diff --git a/arch/sh/include/asm/sh_mobile_lcdc.h b/arch/sh/include/asm/sh_mobile_lcdc.h index 27677727df4d..130102f663f5 100644 --- a/arch/sh/include/asm/sh_mobile_lcdc.h +++ b/arch/sh/include/asm/sh_mobile_lcdc.h @@ -47,12 +47,18 @@ struct sh_mobile_lcdc_board_cfg { void (*display_off)(void *board_data); }; +struct sh_mobile_lcdc_lcd_size_cfg { /* width and height of panel in mm */ + unsigned long width; + unsigned long height; +}; + struct sh_mobile_lcdc_chan_cfg { int chan; int bpp; int interface_type; /* selects RGBn or SYSn I/F, see above */ int clock_divider; struct fb_videomode lcd_cfg; + struct sh_mobile_lcdc_lcd_size_cfg lcd_size_cfg; struct sh_mobile_lcdc_board_cfg board_cfg; struct sh_mobile_lcdc_sys_bus_cfg sys_bus_cfg; /* only for SYSn I/F */ }; diff --git a/drivers/video/sh_mobile_lcdcfb.c b/drivers/video/sh_mobile_lcdcfb.c index f6ef6cca73cd..4c32c06579a0 100644 --- a/drivers/video/sh_mobile_lcdcfb.c +++ b/drivers/video/sh_mobile_lcdcfb.c @@ -595,6 +595,8 @@ static int __init sh_mobile_lcdc_probe(struct platform_device *pdev) info->fbops = &sh_mobile_lcdc_ops; info->var.xres = info->var.xres_virtual = cfg->lcd_cfg.xres; info->var.yres = info->var.yres_virtual = cfg->lcd_cfg.yres; + info->var.width = cfg->lcd_size_cfg.width; + info->var.height = cfg->lcd_size_cfg.height; info->var.activate = FB_ACTIVATE_NOW; error = sh_mobile_lcdc_set_bpp(&info->var, cfg->bpp); if (error) -- cgit v1.2.3 From 74c27c43ebd020fcb65364613503f6c08dc6f535 Mon Sep 17 00:00:00 2001 From: Takashi YOSHII Date: Mon, 11 Aug 2008 20:10:54 +0900 Subject: binfmt_flat: Stub in a FLAT_PLAT_INIT(). This provides a FLAT_PLAT_INIT() arch hook for platforms that need to set up specific register state prior to calling in to the process, as per ELF_PLAT_INIT(). Signed-off-by: Takashi YOSHII Signed-off-by: Paul Mundt --- fs/binfmt_flat.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/fs/binfmt_flat.c b/fs/binfmt_flat.c index 56372ecf1690..dfc0197905ca 100644 --- a/fs/binfmt_flat.c +++ b/fs/binfmt_flat.c @@ -914,7 +914,9 @@ static int load_flat_binary(struct linux_binprm * bprm, struct pt_regs * regs) /* Stash our initial stack pointer into the mm structure */ current->mm->start_stack = (unsigned long )sp; - +#ifdef FLAT_PLAT_INIT + FLAT_PLAT_INIT(regs); +#endif DBG_FLT("start_thread(regs=0x%x, entry=0x%x, start_stack=0x%x)\n", (int)regs, (int)start_addr, (int)current->mm->start_stack); -- cgit v1.2.3 From 9b9d6b2a4f6df5544a10de44760755fe757259e5 Mon Sep 17 00:00:00 2001 From: Takashi YOSHII Date: Mon, 11 Aug 2008 20:12:52 +0900 Subject: sh: Provide a FLAT_PLAT_INIT() definition. SH needs this in order to make sure that r4 has a sane value at process entry time, which the libc expects has already been taken care of. Fixes random crashes in flat binaries. Signed-off-by: Takashi YOSHII Signed-off-by: Paul Mundt --- arch/sh/include/asm/flat.h | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/arch/sh/include/asm/flat.h b/arch/sh/include/asm/flat.h index 0cc800299e06..d3b2b4f109e3 100644 --- a/arch/sh/include/asm/flat.h +++ b/arch/sh/include/asm/flat.h @@ -21,4 +21,11 @@ #define flat_get_relocate_addr(rel) (rel) #define flat_set_persistent(relval, p) ({ (void)p; 0; }) +#define FLAT_PLAT_INIT(_r) \ + do { _r->regs[0]=0; _r->regs[1]=0; _r->regs[2]=0; _r->regs[3]=0; \ + _r->regs[4]=0; _r->regs[5]=0; _r->regs[6]=0; _r->regs[7]=0; \ + _r->regs[8]=0; _r->regs[9]=0; _r->regs[10]=0; _r->regs[11]=0; \ + _r->regs[12]=0; _r->regs[13]=0; _r->regs[14]=0; \ + _r->sr = SR_FD; } while (0) + #endif /* __ASM_SH_FLAT_H */ -- cgit v1.2.3