From 4367c1d846552163f65aec11dcbe2659c8cf7128 Mon Sep 17 00:00:00 2001 From: Jorik Jonker Date: Tue, 6 Dec 2016 15:27:10 +0100 Subject: dts: sun8i-h3: correct UART3 pin definitions In a previous commit, I made a copy/paste error in the pinmux definitions of UART3: PG{13,14} instead of PA{13,14}. This commit takes care of that. I have tested this commit on Orange Pi PC and Orange Pi Plus, and it works for these boards. Fixes: e3d11d3c45c5 ("dts: sun8i-h3: add pinmux definitions for UART2-3") Signed-off-by: Jorik Jonker Acked-by: Maxime Ripard Signed-off-by: Olof Johansson --- arch/arm/boot/dts/sun8i-h3.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi index 75a865406d3e..f4ba088b225e 100644 --- a/arch/arm/boot/dts/sun8i-h3.dtsi +++ b/arch/arm/boot/dts/sun8i-h3.dtsi @@ -410,7 +410,7 @@ }; uart3_pins: uart3 { - allwinner,pins = "PG13", "PG14"; + allwinner,pins = "PA13", "PA14"; allwinner,function = "uart3"; allwinner,drive = ; allwinner,pull = ; -- cgit v1.2.3 From 4b707fa00a80b19b80bc8df6f1cbf4bdd9c91402 Mon Sep 17 00:00:00 2001 From: Stefan Agner Date: Tue, 22 Nov 2016 16:42:04 -0800 Subject: ARM: dts: imx7d: fix LCDIF clock assignment The eLCDIF IP of the i.MX 7 SoC knows multiple clocks and lists them separately: Clock Clock Root Description apb_clk MAIN_AXI_CLK_ROOT AXI clock pix_clk LCDIF_PIXEL_CLK_ROOT Pixel clock ipg_clk_s MAIN_AXI_CLK_ROOT Peripheral access clock All of them are switched by a single gate, which is part of the IMX7D_LCDIF_PIXEL_ROOT_CLK clock. Hence using that clock also for the AXI bus clock (clock-name "axi") makes sure the gate gets enabled when accessing registers. There seem to be no separate AXI display clock, and the clock is optional. Hence remove the dummy clock. This fixes kernel freezes when starting the X-Server (which disables/re-enables the display controller). Fixes: e8ed73f691bd ("ARM: dts: imx7d: add lcdif support") Signed-off-by: Stefan Agner Reviewed-by: Fabio Estevam Acked-by: Shawn Guo Signed-off-by: Olof Johansson --- arch/arm/boot/dts/imx7s.dtsi | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi index 0d7d5ac6257b..2b6cb05bc01a 100644 --- a/arch/arm/boot/dts/imx7s.dtsi +++ b/arch/arm/boot/dts/imx7s.dtsi @@ -643,9 +643,8 @@ reg = <0x30730000 0x10000>; interrupts = ; clocks = <&clks IMX7D_LCDIF_PIXEL_ROOT_CLK>, - <&clks IMX7D_CLK_DUMMY>, - <&clks IMX7D_CLK_DUMMY>; - clock-names = "pix", "axi", "disp_axi"; + <&clks IMX7D_LCDIF_PIXEL_ROOT_CLK>; + clock-names = "pix", "axi"; status = "disabled"; }; }; -- cgit v1.2.3 From 038ccb3e8cee52e07dc118ff99f47eaebc1d0746 Mon Sep 17 00:00:00 2001 From: Roger Shimizu Date: Fri, 2 Dec 2016 00:11:12 +0900 Subject: ARM: dts: orion5x: fix number of sata port for linkstation ls-gl Bug report from Debian [0] shows there's minor changed model of Linkstation LS-GL that uses the 2nd SATA port of the SoC. So it's necessary to enable two SATA ports, though for that specific model only the 2nd one is used. [0] https://bugs.debian.org/845611 Fixes: b1742ffa9ddb ("ARM: dts: orion5x: add device tree for buffalo linkstation ls-gl") Reported-by: Ryan Tandy Tested-by: Ryan Tandy Signed-off-by: Roger Shimizu Signed-off-by: Gregory CLEMENT --- arch/arm/boot/dts/orion5x-linkstation-lsgl.dts | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/arm/boot/dts/orion5x-linkstation-lsgl.dts b/arch/arm/boot/dts/orion5x-linkstation-lsgl.dts index 1cf644bfd7ea..51dc734cd5b9 100644 --- a/arch/arm/boot/dts/orion5x-linkstation-lsgl.dts +++ b/arch/arm/boot/dts/orion5x-linkstation-lsgl.dts @@ -82,6 +82,10 @@ gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>; }; +&sata { + nr-ports = <2>; +}; + &ehci1 { status = "okay"; }; -- cgit v1.2.3