From 225ddf498cc99ead1d11ed1aaf1887e24e1007fa Mon Sep 17 00:00:00 2001 From: Steve Glendinning Date: Thu, 19 Mar 2009 00:24:46 +0000 Subject: smsc911x: allow setting of mac address This patch replaces the generic eth_mac_addr function with one that also updates the hardware mac address registers. It also renames the existing smsc911x_set_mac_address function to smsc911x_hw_set_mac_address for clarity. Newer LAN911x and all LAN921x devices also support changing the mac address while the device is running, which is useful for some bonding modes. Signed-off-by: Steve Glendinning Signed-off-by: David S. Miller --- drivers/net/smsc911x.c | 35 ++++++++++++++++++++++++++++++----- 1 file changed, 30 insertions(+), 5 deletions(-) diff --git a/drivers/net/smsc911x.c b/drivers/net/smsc911x.c index 7df8f6e4f86a..d61514698bb3 100644 --- a/drivers/net/smsc911x.c +++ b/drivers/net/smsc911x.c @@ -1119,7 +1119,7 @@ static int smsc911x_soft_reset(struct smsc911x_data *pdata) /* Sets the device MAC address to dev_addr, called with mac_lock held */ static void -smsc911x_set_mac_address(struct smsc911x_data *pdata, u8 dev_addr[6]) +smsc911x_set_hw_mac_address(struct smsc911x_data *pdata, u8 dev_addr[6]) { u32 mac_high16 = (dev_addr[5] << 8) | dev_addr[4]; u32 mac_low32 = (dev_addr[3] << 24) | (dev_addr[2] << 16) | @@ -1174,7 +1174,7 @@ static int smsc911x_open(struct net_device *dev) /* The soft reset above cleared the device's MAC address, * restore it from local copy (set in probe) */ spin_lock_irq(&pdata->mac_lock); - smsc911x_set_mac_address(pdata, dev->dev_addr); + smsc911x_set_hw_mac_address(pdata, dev->dev_addr); spin_unlock_irq(&pdata->mac_lock); /* Initialise irqs, but leave all sources disabled */ @@ -1504,6 +1504,31 @@ static void smsc911x_poll_controller(struct net_device *dev) } #endif /* CONFIG_NET_POLL_CONTROLLER */ +static int smsc911x_set_mac_address(struct net_device *dev, void *p) +{ + struct smsc911x_data *pdata = netdev_priv(dev); + struct sockaddr *addr = p; + + /* On older hardware revisions we cannot change the mac address + * registers while receiving data. Newer devices can safely change + * this at any time. */ + if (pdata->generation <= 1 && netif_running(dev)) + return -EBUSY; + + if (!is_valid_ether_addr(addr->sa_data)) + return -EADDRNOTAVAIL; + + memcpy(dev->dev_addr, addr->sa_data, ETH_ALEN); + + spin_lock_irq(&pdata->mac_lock); + smsc911x_set_hw_mac_address(pdata, dev->dev_addr); + spin_unlock_irq(&pdata->mac_lock); + + dev_info(&dev->dev, "MAC Address: %pM\n", dev->dev_addr); + + return 0; +} + /* Standard ioctls for mii-tool */ static int smsc911x_do_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) { @@ -1734,7 +1759,7 @@ static const struct net_device_ops smsc911x_netdev_ops = { .ndo_set_multicast_list = smsc911x_set_multicast_list, .ndo_do_ioctl = smsc911x_do_ioctl, .ndo_validate_addr = eth_validate_addr, - .ndo_set_mac_address = eth_mac_addr, + .ndo_set_mac_address = smsc911x_set_mac_address, #ifdef CONFIG_NET_POLL_CONTROLLER .ndo_poll_controller = smsc911x_poll_controller, #endif @@ -2022,7 +2047,7 @@ static int __devinit smsc911x_drv_probe(struct platform_device *pdev) /* Check if mac address has been specified when bringing interface up */ if (is_valid_ether_addr(dev->dev_addr)) { - smsc911x_set_mac_address(pdata, dev->dev_addr); + smsc911x_set_hw_mac_address(pdata, dev->dev_addr); SMSC_TRACE(PROBE, "MAC Address is specified by configuration"); } else { /* Try reading mac address from device. if EEPROM is present @@ -2036,7 +2061,7 @@ static int __devinit smsc911x_drv_probe(struct platform_device *pdev) } else { /* eeprom values are invalid, generate random MAC */ random_ether_addr(dev->dev_addr); - smsc911x_set_mac_address(pdata, dev->dev_addr); + smsc911x_set_hw_mac_address(pdata, dev->dev_addr); SMSC_TRACE(PROBE, "MAC Address is set to random_ether_addr"); } -- cgit v1.2.3