From 5faf5011841dc2a4797093b845e49bc40b4b4666 Mon Sep 17 00:00:00 2001 From: Yauhen Kharuzhy Date: Wed, 19 Aug 2009 16:31:05 +0300 Subject: ARM: S3C: Add S3C2416 detection to uncompress code Add S3C2416 serial port setup to uncompress code. Signed-off-by: Yauhen Kharuzhy Signed-off-by: Ben Dooks --- arch/arm/mach-s3c2410/include/mach/uncompress.h | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-s3c2410/include/mach/uncompress.h b/arch/arm/mach-s3c2410/include/mach/uncompress.h index 72f756c5e504..8b283f847daa 100644 --- a/arch/arm/mach-s3c2410/include/mach/uncompress.h +++ b/arch/arm/mach-s3c2410/include/mach/uncompress.h @@ -40,7 +40,9 @@ static void arch_detect_cpu(void) cpuid &= S3C2410_GSTATUS1_IDMASK; if (is_arm926() || cpuid == S3C2410_GSTATUS1_2440 || - cpuid == S3C2410_GSTATUS1_2442) { + cpuid == S3C2410_GSTATUS1_2442 || + cpuid == S3C2410_GSTATUS1_2416 || + cpuid == S3C2410_GSTATUS1_2450) { fifo_mask = S3C2440_UFSTAT_TXMASK; fifo_max = 63 << S3C2440_UFSTAT_TXSHIFT; } else { -- cgit v1.2.3 From 4fcfce9f33cd2e173f83c20e93c8b0a9397bf0bc Mon Sep 17 00:00:00 2001 From: Yauhen Kharuzhy Date: Wed, 19 Aug 2009 16:31:06 +0300 Subject: serial: Use s3c2440 driver for S3C2416 SoC UARTs in the S3C2416 are almost same as in S3C2443 and can be handled by s3c2440 serial driver. Signed-off-by: Yauhen Kharuzhy Signed-off-by: Ben Dooks --- drivers/serial/Kconfig | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index f55c49475a8c..5f3f03df92e3 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -518,12 +518,13 @@ config SERIAL_S3C2412 Serial port support for the Samsung S3C2412 and S3C2413 SoC config SERIAL_S3C2440 - tristate "Samsung S3C2440/S3C2442 Serial port support" - depends on SERIAL_SAMSUNG && (CPU_S3C2440 || CPU_S3C2442) + tristate "Samsung S3C2440/S3C2442/S3C2416 Serial port support" + depends on SERIAL_SAMSUNG && (CPU_S3C2440 || CPU_S3C2442 || CPU_S3C2416) default y if CPU_S3C2440 default y if CPU_S3C2442 + select SERIAL_SAMSUNG_UARTS_4 if CPU_S3C2416 help - Serial port support for the Samsung S3C2440 and S3C2442 SoC + Serial port support for the Samsung S3C2440, S3C2416 and S3C2442 SoC config SERIAL_S3C24A0 tristate "Samsung S3C24A0 Serial port support" -- cgit v1.2.3 From 7cfdee9f6791fe9ec288e75ee746790ebf3b6c3b Mon Sep 17 00:00:00 2001 From: Yauhen Kharuzhy Date: Wed, 19 Aug 2009 16:31:03 +0300 Subject: ARM: S3C2416: Add S3C2416-specific registers definitions Add macros for S3C2416 SoC support. Signed-off-by: Yauhen Kharuzhy [ben-linux@fluff.org: removed files that need changing] [ben-linux@fluff.org: Fix S3C2416_GPH0_TXD0 definition] Signed-off-by: Ben Dooks --- arch/arm/mach-s3c2410/include/mach/dma.h | 2 +- arch/arm/mach-s3c2410/include/mach/irqs.h | 22 ++++++++++++- arch/arm/mach-s3c2410/include/mach/regs-dsc.h | 36 ++++++++++++++++++++++ arch/arm/mach-s3c2410/include/mach/regs-gpio.h | 28 +++++++++++++++++ arch/arm/mach-s3c2410/include/mach/regs-irq.h | 10 ++++++ .../mach-s3c2410/include/mach/regs-s3c2416-mem.h | 30 ++++++++++++++++++ arch/arm/mach-s3c2410/include/mach/regs-s3c2416.h | 24 +++++++++++++++ 7 files changed, 150 insertions(+), 2 deletions(-) create mode 100644 arch/arm/mach-s3c2410/include/mach/regs-s3c2416-mem.h create mode 100644 arch/arm/mach-s3c2410/include/mach/regs-s3c2416.h diff --git a/arch/arm/mach-s3c2410/include/mach/dma.h b/arch/arm/mach-s3c2410/include/mach/dma.h index 08ac5f96c012..cf68136cc668 100644 --- a/arch/arm/mach-s3c2410/include/mach/dma.h +++ b/arch/arm/mach-s3c2410/include/mach/dma.h @@ -54,7 +54,7 @@ enum dma_ch { #define DMACH_LOW_LEVEL (1<<28) /* use this to specifiy hardware ch no */ /* we have 4 dma channels */ -#ifndef CONFIG_CPU_S3C2443 +#if !defined(CONFIG_CPU_S3C2443) && !defined(CONFIG_CPU_S3C2416) #define S3C_DMA_CHANNELS (4) #else #define S3C_DMA_CHANNELS (6) diff --git a/arch/arm/mach-s3c2410/include/mach/irqs.h b/arch/arm/mach-s3c2410/include/mach/irqs.h index 6c12c6312ad8..c1b8ec07bf45 100644 --- a/arch/arm/mach-s3c2410/include/mach/irqs.h +++ b/arch/arm/mach-s3c2410/include/mach/irqs.h @@ -115,6 +115,26 @@ #define IRQ_S3C2412_SDI S3C2410_IRQSUB(13) #define IRQ_S3C2412_CF S3C2410_IRQSUB(14) + +#define IRQ_S3C2416_EINT8t15 S3C2410_IRQ(5) +#define IRQ_S3C2416_DMA S3C2410_IRQ(17) +#define IRQ_S3C2416_UART3 S3C2410_IRQ(18) +#define IRQ_S3C2416_SDI1 S3C2410_IRQ(20) +#define IRQ_S3C2416_SDI0 S3C2410_IRQ(21) + +#define IRQ_S3C2416_LCD2 S3C2410_IRQSUB(15) +#define IRQ_S3C2416_LCD3 S3C2410_IRQSUB(16) +#define IRQ_S3C2416_LCD4 S3C2410_IRQSUB(17) +#define IRQ_S3C2416_DMA0 S3C2410_IRQSUB(18) +#define IRQ_S3C2416_DMA1 S3C2410_IRQSUB(19) +#define IRQ_S3C2416_DMA2 S3C2410_IRQSUB(20) +#define IRQ_S3C2416_DMA3 S3C2410_IRQSUB(21) +#define IRQ_S3C2416_DMA4 S3C2410_IRQSUB(22) +#define IRQ_S3C2416_DMA5 S3C2410_IRQSUB(23) +#define IRQ_S32416_WDT S3C2410_IRQSUB(27) +#define IRQ_S32416_AC97 S3C2410_IRQSUB(28) + + /* extra irqs for s3c2440 */ #define IRQ_S3C2440_CAM_C S3C2410_IRQSUB(11) /* S3C2443 too */ @@ -152,7 +172,7 @@ #define IRQ_S3C2443_WDT S3C2410_IRQSUB(27) #define IRQ_S3C2443_AC97 S3C2410_IRQSUB(28) -#ifdef CONFIG_CPU_S3C2443 +#if defined(CONFIG_CPU_S3C2443) || defined(CONFIG_CPU_S3C2416) #define NR_IRQS (IRQ_S3C2443_AC97+1) #else #define NR_IRQS (IRQ_S3C2440_AC97+1) diff --git a/arch/arm/mach-s3c2410/include/mach/regs-dsc.h b/arch/arm/mach-s3c2410/include/mach/regs-dsc.h index 3c3853cd3cf7..98fd4a05587c 100644 --- a/arch/arm/mach-s3c2410/include/mach/regs-dsc.h +++ b/arch/arm/mach-s3c2410/include/mach/regs-dsc.h @@ -19,6 +19,42 @@ #define S3C2412_DSC1 S3C2410_GPIOREG(0xe0) #endif +#if defined(CONFIG_CPU_S3C2416) +#define S3C2416_DSC0 S3C2410_GPIOREG(0xc0) +#define S3C2416_DSC1 S3C2410_GPIOREG(0xc4) +#define S3C2416_DSC2 S3C2410_GPIOREG(0xc8) +#define S3C2416_DSC3 S3C2410_GPIOREG(0x110) + +#define S3C2416_SELECT_DSC0 (0 << 30) +#define S3C2416_SELECT_DSC1 (1 << 30) +#define S3C2416_SELECT_DSC2 (2 << 30) +#define S3C2416_SELECT_DSC3 (3 << 30) + +#define S3C2416_DSC_GETSHIFT(x) (x & 30) + +#define S3C2416_DSC0_CF (S3C2416_SELECT_DSC0 | 28) +#define S3C2416_DSC0_CF_5mA (0 << 28) +#define S3C2416_DSC0_CF_10mA (1 << 28) +#define S3C2416_DSC0_CF_15mA (2 << 28) +#define S3C2416_DSC0_CF_21mA (3 << 28) +#define S3C2416_DSC0_CF_MASK (3 << 28) + +#define S3C2416_DSC0_nRBE (S3C2416_SELECT_DSC0 | 26) +#define S3C2416_DSC0_nRBE_5mA (0 << 26) +#define S3C2416_DSC0_nRBE_10mA (1 << 26) +#define S3C2416_DSC0_nRBE_15mA (2 << 26) +#define S3C2416_DSC0_nRBE_21mA (3 << 26) +#define S3C2416_DSC0_nRBE_MASK (3 << 26) + +#define S3C2416_DSC0_nROE (S3C2416_SELECT_DSC0 | 24) +#define S3C2416_DSC0_nROE_5mA (0 << 24) +#define S3C2416_DSC0_nROE_10mA (1 << 24) +#define S3C2416_DSC0_nROE_15mA (2 << 24) +#define S3C2416_DSC0_nROE_21mA (3 << 24) +#define S3C2416_DSC0_nROE_MASK (3 << 24) + +#endif + #if defined(CONFIG_CPU_S3C244X) #define S3C2440_DSC0 S3C2410_GPIOREG(0xc4) diff --git a/arch/arm/mach-s3c2410/include/mach/regs-gpio.h b/arch/arm/mach-s3c2410/include/mach/regs-gpio.h index 821b966bf05a..a6384239eddf 100644 --- a/arch/arm/mach-s3c2410/include/mach/regs-gpio.h +++ b/arch/arm/mach-s3c2410/include/mach/regs-gpio.h @@ -610,29 +610,50 @@ #define S3C2410_GPHUP S3C2410_GPIOREG(0x78) #define S3C2410_GPH0_nCTS0 (0x02 << 0) +#define S3C2416_GPH0_TXD0 (0x02 << 0) #define S3C2410_GPH1_nRTS0 (0x02 << 2) +#define S3C2416_GPH1_RXD0 (0x02 << 2) #define S3C2410_GPH2_TXD0 (0x02 << 4) +#define S3C2416_GPH2_TXD1 (0x02 << 4) #define S3C2410_GPH3_RXD0 (0x02 << 6) +#define S3C2416_GPH3_RXD1 (0x02 << 6) #define S3C2410_GPH4_TXD1 (0x02 << 8) +#define S3C2416_GPH4_TXD2 (0x02 << 8) #define S3C2410_GPH5_RXD1 (0x02 << 10) +#define S3C2416_GPH5_RXD2 (0x02 << 10) #define S3C2410_GPH6_TXD2 (0x02 << 12) +#define S3C2416_GPH6_TXD3 (0x02 << 12) #define S3C2410_GPH6_nRTS1 (0x03 << 12) +#define S3C2416_GPH6_nRTS2 (0x03 << 12) #define S3C2410_GPH7_RXD2 (0x02 << 14) +#define S3C2416_GPH7_RXD3 (0x02 << 14) #define S3C2410_GPH7_nCTS1 (0x03 << 14) +#define S3C2416_GPH7_nCTS2 (0x03 << 14) #define S3C2410_GPH8_UCLK (0x02 << 16) +#define S3C2416_GPH8_nCTS0 (0x02 << 16) #define S3C2410_GPH9_CLKOUT0 (0x02 << 18) #define S3C2442_GPH9_nSPICS0 (0x03 << 18) +#define S3C2416_GPH9_nRTS0 (0x02 << 18) #define S3C2410_GPH10_CLKOUT1 (0x02 << 20) +#define S3C2416_GPH10_nCTS1 (0x02 << 20) + +#define S3C2416_GPH11_nRTS1 (0x02 << 22) + +#define S3C2416_GPH12_EXTUARTCLK (0x02 << 24) + +#define S3C2416_GPH13_CLKOUT0 (0x02 << 26) + +#define S3C2416_GPH14_CLKOUT1 (0x02 << 28) /* The S3C2412 and S3C2413 move the GPJ register set to after * GPH, which means all registers after 0x80 are now offset by 0x10 @@ -703,6 +724,7 @@ #define S3C2412_MISCCR_CLK1_CLKsrc (0<<8) #define S3C2410_MISCCR_USBSUSPND0 (1<<12) +#define S3C2416_MISCCR_SEL_SUSPND (1<<12) #define S3C2410_MISCCR_USBSUSPND1 (1<<13) #define S3C2410_MISCCR_nRSTCON (1<<16) @@ -712,6 +734,9 @@ #define S3C2410_MISCCR_nEN_SCLKE (1<<19) /* not 2412 */ #define S3C2410_MISCCR_SDSLEEP (7<<17) +#define S3C2416_MISCCR_FLT_I2C (1<<24) +#define S3C2416_MISCCR_HSSPI_EN2 (1<<31) + /* external interrupt control... */ /* S3C2410_EXTINT0 -> irq sense control for EINT0..EINT7 * S3C2410_EXTINT1 -> irq sense control for EINT8..EINT15 @@ -779,8 +804,11 @@ #define S3C2410_GSTATUS1_IDMASK (0xffff0000) #define S3C2410_GSTATUS1_2410 (0x32410000) #define S3C2410_GSTATUS1_2412 (0x32412001) +#define S3C2410_GSTATUS1_2416 (0x32416003) #define S3C2410_GSTATUS1_2440 (0x32440000) #define S3C2410_GSTATUS1_2442 (0x32440aaa) +/* some 2416 CPUs report this value also */ +#define S3C2410_GSTATUS1_2450 (0x32450003) #define S3C2410_GSTATUS2_WTRESET (1<<2) #define S3C2410_GSTATUS2_OFFRESET (1<<1) diff --git a/arch/arm/mach-s3c2410/include/mach/regs-irq.h b/arch/arm/mach-s3c2410/include/mach/regs-irq.h index de86ee8812bd..0f07ba30b1fb 100644 --- a/arch/arm/mach-s3c2410/include/mach/regs-irq.h +++ b/arch/arm/mach-s3c2410/include/mach/regs-irq.h @@ -27,6 +27,16 @@ #define S3C2410_SUBSRCPND S3C2410_IRQREG(0x018) #define S3C2410_INTSUBMSK S3C2410_IRQREG(0x01C) +#define S3C2416_PRIORITY_MODE1 S3C2410_IRQREG(0x030) +#define S3C2416_PRIORITY_UPDATE1 S3C2410_IRQREG(0x034) +#define S3C2416_SRCPND2 S3C2410_IRQREG(0x040) +#define S3C2416_INTMOD2 S3C2410_IRQREG(0x044) +#define S3C2416_INTMSK2 S3C2410_IRQREG(0x048) +#define S3C2416_INTPND2 S3C2410_IRQREG(0x050) +#define S3C2416_INTOFFSET2 S3C2410_IRQREG(0x054) +#define S3C2416_PRIORITY_MODE2 S3C2410_IRQREG(0x070) +#define S3C2416_PRIORITY_UPDATE2 S3C2410_IRQREG(0x074) + /* mask: 0=enable, 1=disable * 1 bit EINT, 4=EINT4, 23=EINT23 * EINT0,1,2,3 are not handled here. diff --git a/arch/arm/mach-s3c2410/include/mach/regs-s3c2416-mem.h b/arch/arm/mach-s3c2410/include/mach/regs-s3c2416-mem.h new file mode 100644 index 000000000000..2f31b74974af --- /dev/null +++ b/arch/arm/mach-s3c2410/include/mach/regs-s3c2416-mem.h @@ -0,0 +1,30 @@ +/* arch/arm/mach-s3c2410/include/mach/regs-s3c2416-mem.h + * + * Copyright (c) 2009 Yauhen Kharuzhy , + * as part of OpenInkpot project + * Copyright (c) 2009 Promwad Innovation Company + * Yauhen Kharuzhy + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * S3C2416 memory register definitions +*/ + +#ifndef __ASM_ARM_REGS_S3C2416_MEM +#define __ASM_ARM_REGS_S3C2416_MEM + +#ifndef S3C2416_MEMREG +#define S3C2416_MEMREG(x) (S3C24XX_VA_MEMCTRL + (x)) +#endif + +#define S3C2416_BANKCFG S3C2416_MEMREG(0x00) +#define S3C2416_BANKCON1 S3C2416_MEMREG(0x04) +#define S3C2416_BANKCON2 S3C2416_MEMREG(0x08) +#define S3C2416_BANKCON3 S3C2416_MEMREG(0x0C) + +#define S3C2416_REFRESH S3C2416_MEMREG(0x10) +#define S3C2416_TIMEOUT S3C2416_MEMREG(0x14) + +#endif /* __ASM_ARM_REGS_S3C2416_MEM */ diff --git a/arch/arm/mach-s3c2410/include/mach/regs-s3c2416.h b/arch/arm/mach-s3c2410/include/mach/regs-s3c2416.h new file mode 100644 index 000000000000..e443167efb87 --- /dev/null +++ b/arch/arm/mach-s3c2410/include/mach/regs-s3c2416.h @@ -0,0 +1,24 @@ +/* arch/arm/mach-s3c2410/include/mach/regs-s3c2416.h + * + * Copyright (c) 2009 Yauhen Kharuzhy , + * as part of OpenInkpot project + * Copyright (c) 2009 Promwad Innovation Company + * Yauhen Kharuzhy + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * S3C2416 specific register definitions +*/ + +#ifndef __ASM_ARCH_REGS_S3C2416_H +#define __ASM_ARCH_REGS_S3C2416_H "s3c2416" + +#define S3C2416_SWRST (S3C24XX_VA_CLKPWR + 0x44) +#define S3C2416_SWRST_RESET (0x533C2416) + +/* see regs-power.h for the other registers in the power block. */ + +#endif /* __ASM_ARCH_REGS_S3C2416_H */ + -- cgit v1.2.3 From e561aacc70716ff59b9359ba8f010609ee757241 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Wed, 28 Apr 2010 18:10:02 +0900 Subject: ARM: SAMSUNG: Move S3C6400 PLL code to for re-use The S3C6400 EPLL code matches the S3C2416 and compatible SoCs, so move it from mach-s3c64xx into for easy reuse. Signed-off-by: Ben Dooks --- arch/arm/mach-s3c64xx/include/mach/pll.h | 35 ++---------------- arch/arm/plat-samsung/include/plat/pll6553x.h | 51 +++++++++++++++++++++++++++ 2 files changed, 54 insertions(+), 32 deletions(-) create mode 100644 arch/arm/plat-samsung/include/plat/pll6553x.h diff --git a/arch/arm/mach-s3c64xx/include/mach/pll.h b/arch/arm/mach-s3c64xx/include/mach/pll.h index 90bbd72fdc4e..5ef0bb698ee0 100644 --- a/arch/arm/mach-s3c64xx/include/mach/pll.h +++ b/arch/arm/mach-s3c64xx/include/mach/pll.h @@ -20,6 +20,7 @@ #define S3C6400_PLL_SDIV_SHIFT (0) #include +#include static inline unsigned long s3c6400_get_pll(unsigned long baseclk, u32 pllcon) @@ -37,38 +38,8 @@ static inline unsigned long s3c6400_get_pll(unsigned long baseclk, return (unsigned long)fvco; } -#define S3C6400_EPLL_MDIV_MASK ((1 << (23-16)) - 1) -#define S3C6400_EPLL_PDIV_MASK ((1 << (13-8)) - 1) -#define S3C6400_EPLL_SDIV_MASK ((1 << (2-0)) - 1) -#define S3C6400_EPLL_MDIV_SHIFT (16) -#define S3C6400_EPLL_PDIV_SHIFT (8) -#define S3C6400_EPLL_SDIV_SHIFT (0) -#define S3C6400_EPLL_KDIV_MASK (0xffff) - static inline unsigned long s3c6400_get_epll(unsigned long baseclk) { - unsigned long result; - u32 epll0 = __raw_readl(S3C_EPLL_CON0); - u32 epll1 = __raw_readl(S3C_EPLL_CON1); - u32 mdiv, pdiv, sdiv, kdiv; - u64 tmp; - - mdiv = (epll0 >> S3C6400_EPLL_MDIV_SHIFT) & S3C6400_EPLL_MDIV_MASK; - pdiv = (epll0 >> S3C6400_EPLL_PDIV_SHIFT) & S3C6400_EPLL_PDIV_MASK; - sdiv = (epll0 >> S3C6400_EPLL_SDIV_SHIFT) & S3C6400_EPLL_SDIV_MASK; - kdiv = epll1 & S3C6400_EPLL_KDIV_MASK; - - /* We need to multiple baseclk by mdiv (the integer part) and kdiv - * which is in 2^16ths, so shift mdiv up (does not overflow) and - * add kdiv before multiplying. The use of tmp is to avoid any - * overflows before shifting bac down into result when multipling - * by the mdiv and kdiv pair. - */ - - tmp = baseclk; - tmp *= (mdiv << 16) + kdiv; - do_div(tmp, (pdiv << sdiv)); - result = tmp >> 16; - - return result; + return s3c_get_pll6553x(baseclk, __raw_readl(S3C_EPLL_CON0), + __raw_readl(S3C_EPLL_CON1)); } diff --git a/arch/arm/plat-samsung/include/plat/pll6553x.h b/arch/arm/plat-samsung/include/plat/pll6553x.h new file mode 100644 index 000000000000..b8b7e1d884f8 --- /dev/null +++ b/arch/arm/plat-samsung/include/plat/pll6553x.h @@ -0,0 +1,51 @@ +/* arch/arm/plat-samsung/include/plat/pll6553x.h + * partially from arch/arm/mach-s3c64xx/include/mach/pll.h + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * Ben Dooks + * http://armlinux.simtec.co.uk/ + * + * Samsung PLL6553x PLL code + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/* S3C6400 and compatible (S3C2416, etc.) EPLL code */ + +#define PLL6553X_MDIV_MASK ((1 << (23-16)) - 1) +#define PLL6553X_PDIV_MASK ((1 << (13-8)) - 1) +#define PLL6553X_SDIV_MASK ((1 << (2-0)) - 1) +#define PLL6553X_MDIV_SHIFT (16) +#define PLL6553X_PDIV_SHIFT (8) +#define PLL6553X_SDIV_SHIFT (0) +#define PLL6553X_KDIV_MASK (0xffff) + +static inline unsigned long s3c_get_pll6553x(unsigned long baseclk, + u32 pll0, u32 pll1) +{ + unsigned long result; + u32 mdiv, pdiv, sdiv, kdiv; + u64 tmp; + + mdiv = (pll0 >> PLL6553X_MDIV_SHIFT) & PLL6553X_MDIV_MASK; + pdiv = (pll0 >> PLL6553X_PDIV_SHIFT) & PLL6553X_PDIV_MASK; + sdiv = (pll0 >> PLL6553X_SDIV_SHIFT) & PLL6553X_SDIV_MASK; + kdiv = pll1 & PLL6553X_KDIV_MASK; + + /* We need to multiple baseclk by mdiv (the integer part) and kdiv + * which is in 2^16ths, so shift mdiv up (does not overflow) and + * add kdiv before multiplying. The use of tmp is to avoid any + * overflows before shifting bac down into result when multipling + * by the mdiv and kdiv pair. + */ + + tmp = baseclk; + tmp *= (mdiv << 16) + kdiv; + do_div(tmp, (pdiv << sdiv)); + result = tmp >> 16; + + return result; +} -- cgit v1.2.3 From 4e04691bc600b53f6aab63404e58fae3bdf8e310 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Wed, 28 Apr 2010 12:58:13 +0900 Subject: ARM: SAMSUNG: Add s3c_disable_clocks() and tidy init+disable usage Add s3c_disable_clocks() and change the clock registration code to use the s3c_register_clocks() followed by s3c_disable_clocks() instead of the loops it was using. Signed-off-by: Ben Dooks --- arch/arm/mach-s3c2443/clock.c | 27 ++++----------------------- arch/arm/plat-s3c24xx/s3c2410-clock.c | 15 +++------------ arch/arm/plat-samsung/clock.c | 15 +++++++++++++++ arch/arm/plat-samsung/include/plat/clock.h | 1 + 4 files changed, 23 insertions(+), 35 deletions(-) diff --git a/arch/arm/mach-s3c2443/clock.c b/arch/arm/mach-s3c2443/clock.c index 62cd4eaee01b..76d8d66247c3 100644 --- a/arch/arm/mach-s3c2443/clock.c +++ b/arch/arm/mach-s3c2443/clock.c @@ -492,7 +492,7 @@ static struct clk clk_prediv = { /* standard clock definitions */ -static struct clk init_clocks_disable[] = { +static struct clk init_clocks_off[] = { { .name = "nand", .id = -1, @@ -761,9 +761,7 @@ void __init_or_cpufreq s3c2443_setup_clocks(void) void __init s3c2443_init_clocks(int xtal) { - struct clk *clkp; unsigned long epllcon = __raw_readl(S3C2443_EPLLCON); - int ret; int ptr; /* s3c2443 parents h and p clocks from prediv */ @@ -774,15 +772,7 @@ void __init s3c2443_init_clocks(int xtal) s3c2443_setup_clocks(); s3c2443_clk_initparents(); - for (ptr = 0; ptr < ARRAY_SIZE(clks); ptr++) { - clkp = clks[ptr]; - - ret = s3c24xx_register_clock(clkp); - if (ret < 0) { - printk(KERN_ERR "Failed to register clock %s (%d)\n", - clkp->name, ret); - } - } + s3c24xx_register_clocks(clks, ARRAY_SIZE(clks)); for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++) s3c_register_clksrc(clksrcs[ptr], 1); @@ -819,17 +809,8 @@ void __init s3c2443_init_clocks(int xtal) /* install (and disable) the clocks we do not need immediately */ - clkp = init_clocks_disable; - for (ptr = 0; ptr < ARRAY_SIZE(init_clocks_disable); ptr++, clkp++) { - - ret = s3c24xx_register_clock(clkp); - if (ret < 0) { - printk(KERN_ERR "Failed to register clock %s (%d)\n", - clkp->name, ret); - } - - (clkp->enable)(clkp, 0); - } + s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); + s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); s3c_pwmclk_init(); } diff --git a/arch/arm/plat-s3c24xx/s3c2410-clock.c b/arch/arm/plat-s3c24xx/s3c2410-clock.c index b61bdb793734..9ecc5d913679 100644 --- a/arch/arm/plat-s3c24xx/s3c2410-clock.c +++ b/arch/arm/plat-s3c24xx/s3c2410-clock.c @@ -87,7 +87,7 @@ static int s3c2410_upll_enable(struct clk *clk, int enable) /* standard clock definitions */ -static struct clk init_clocks_disable[] = { +static struct clk init_clocks_off[] = { { .name = "nand", .id = -1, @@ -249,17 +249,8 @@ int __init s3c2410_baseclk_add(void) /* install (and disable) the clocks we do not need immediately */ - clkp = init_clocks_disable; - for (ptr = 0; ptr < ARRAY_SIZE(init_clocks_disable); ptr++, clkp++) { - - ret = s3c24xx_register_clock(clkp); - if (ret < 0) { - printk(KERN_ERR "Failed to register clock %s (%d)\n", - clkp->name, ret); - } - - s3c2410_clkcon_enable(clkp, 0); - } + s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); + s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); /* show the clock-slow value */ diff --git a/arch/arm/plat-samsung/clock.c b/arch/arm/plat-samsung/clock.c index 1b25c9d8c403..8bf79f3efdfb 100644 --- a/arch/arm/plat-samsung/clock.c +++ b/arch/arm/plat-samsung/clock.c @@ -376,6 +376,21 @@ void __init s3c_register_clocks(struct clk *clkp, int nr_clks) } } +/** + * s3c_disable_clocks() - disable an array of clocks + * @clkp: Pointer to the first clock in the array. + * @nr_clks: Number of clocks to register. + * + * for internal use only at initialisation time. disable the clocks in the + * @clkp array. + */ + +void __init s3c_disable_clocks(struct clk *clkp, int nr_clks) +{ + for (; nr_clks > 0; nr_clks--, clkp++) + (clkp->enable)(clkp, 0); +} + /* initalise all the clocks */ int __init s3c24xx_register_baseclocks(unsigned long xtal) diff --git a/arch/arm/plat-samsung/include/plat/clock.h b/arch/arm/plat-samsung/include/plat/clock.h index 60b62692ac7a..12caf48a6bdc 100644 --- a/arch/arm/plat-samsung/include/plat/clock.h +++ b/arch/arm/plat-samsung/include/plat/clock.h @@ -91,6 +91,7 @@ extern int s3c24xx_register_clock(struct clk *clk); extern int s3c24xx_register_clocks(struct clk **clk, int nr_clks); extern void s3c_register_clocks(struct clk *clk, int nr_clks); +extern void s3c_disable_clocks(struct clk *clkp, int nr_clks); extern int s3c24xx_register_baseclocks(unsigned long xtal); -- cgit v1.2.3 From f1290a49c5496521360a3e40d8bc766aceee65e5 Mon Sep 17 00:00:00 2001 From: Yauhen Kharuzhy Date: Wed, 28 Apr 2010 18:09:01 +0900 Subject: ARM: S3C2416: Add arch support Add arch/arm/mach-s3c2416 for support of the Samsung S3C2416 SoC. This patch adds support of the S3C2416 SoC, clocks, timers, and initial IRQ support (without support of secondary set of registers). Signed-off-by: Yauhen Kharuzhy [ben-linux@fluff.org: removed files to be reworked, fixed conflicts] [ben-linux@fluff.org: use s3c2443 reset instead of specific reset code] Signed-off-by: Ben Dooks --- arch/arm/Kconfig | 3 +- arch/arm/Makefile | 2 +- arch/arm/mach-s3c2412/Kconfig | 3 +- arch/arm/mach-s3c2416/Kconfig | 25 +++ arch/arm/mach-s3c2416/Makefile | 18 ++ arch/arm/mach-s3c2416/irq.c | 254 +++++++++++++++++++++++++++ arch/arm/mach-s3c2416/s3c2416.c | 115 ++++++++++++ arch/arm/plat-s3c24xx/cpu.c | 13 ++ arch/arm/plat-s3c24xx/include/plat/s3c2416.h | 31 ++++ arch/arm/plat-samsung/include/plat/cpu.h | 1 + 10 files changed, 462 insertions(+), 3 deletions(-) create mode 100644 arch/arm/mach-s3c2416/Kconfig create mode 100644 arch/arm/mach-s3c2416/Makefile create mode 100644 arch/arm/mach-s3c2416/irq.c create mode 100644 arch/arm/mach-s3c2416/s3c2416.c create mode 100644 arch/arm/plat-s3c24xx/include/plat/s3c2416.h diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 92622eb5cc0d..6785c33908bf 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -647,7 +647,7 @@ config ARCH_SA1100 Support for StrongARM 11x0 based boards. config ARCH_S3C2410 - bool "Samsung S3C2410, S3C2412, S3C2413, S3C2440, S3C2442, S3C2443" + bool "Samsung S3C2410, S3C2412, S3C2413, S3C2416, S3C2440, S3C2442, S3C2443" select GENERIC_GPIO select ARCH_HAS_CPUFREQ select HAVE_CLK @@ -892,6 +892,7 @@ if ARCH_S3C2410 source "arch/arm/mach-s3c2400/Kconfig" source "arch/arm/mach-s3c2410/Kconfig" source "arch/arm/mach-s3c2412/Kconfig" +source "arch/arm/mach-s3c2416/Kconfig" source "arch/arm/mach-s3c2440/Kconfig" source "arch/arm/mach-s3c2443/Kconfig" endif diff --git a/arch/arm/Makefile b/arch/arm/Makefile index ed820e737a8a..15947397e12a 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -160,7 +160,7 @@ machine-$(CONFIG_ARCH_PNX4008) := pnx4008 machine-$(CONFIG_ARCH_PXA) := pxa machine-$(CONFIG_ARCH_REALVIEW) := realview machine-$(CONFIG_ARCH_RPC) := rpc -machine-$(CONFIG_ARCH_S3C2410) := s3c2410 s3c2400 s3c2412 s3c2440 s3c2443 +machine-$(CONFIG_ARCH_S3C2410) := s3c2410 s3c2400 s3c2412 s3c2416 s3c2440 s3c2443 machine-$(CONFIG_ARCH_S3C24A0) := s3c24a0 machine-$(CONFIG_ARCH_S3C64XX) := s3c64xx machine-$(CONFIG_ARCH_S5P6440) := s5p6440 diff --git a/arch/arm/mach-s3c2412/Kconfig b/arch/arm/mach-s3c2412/Kconfig index 9a8c0657ae50..cef6a65637bd 100644 --- a/arch/arm/mach-s3c2412/Kconfig +++ b/arch/arm/mach-s3c2412/Kconfig @@ -16,7 +16,8 @@ config CPU_S3C2412 config CPU_S3C2412_ONLY bool depends on ARCH_S3C2410 && !CPU_S3C2400 && !CPU_S3C2410 && \ - !CPU_S3C2440 && !CPU_S3C2442 && !CPU_S3C2443 && CPU_S3C2412 + !CPU_2416 && !CPU_S3C2440 && !CPU_S3C2442 && \ + !CPU_S3C2443 && CPU_S3C2412 default y if CPU_S3C2412 config S3C2412_DMA diff --git a/arch/arm/mach-s3c2416/Kconfig b/arch/arm/mach-s3c2416/Kconfig new file mode 100644 index 000000000000..cc320f6b7372 --- /dev/null +++ b/arch/arm/mach-s3c2416/Kconfig @@ -0,0 +1,25 @@ +# arch/arm/mach-s3c2416/Kconfig +# +# Copyright 2009 Yauhen Kharuzhy +# +# Licensed under GPLv2 + +config CPU_S3C2416 + bool + depends on ARCH_S3C2410 + select CPU_ARM926T + select S3C2416_DMA if S3C2410_DMA + select CPU_LLSERIAL_S3C2440 + help + Support for the S3C2416 SoC from the S3C24XX line + +config S3C2416_DMA + bool + depends on CPU_S3C2416 + help + Internal config node for S3C2416 DMA support + +menu "S3C2416 Machines" + + +endmenu diff --git a/arch/arm/mach-s3c2416/Makefile b/arch/arm/mach-s3c2416/Makefile new file mode 100644 index 000000000000..34bb70d44d50 --- /dev/null +++ b/arch/arm/mach-s3c2416/Makefile @@ -0,0 +1,18 @@ +# arch/arm/mach-s3c2416/Makefile +# +# Copyright 2009 Yauhen Kharuzhy +# +# Licensed under GPLv2 + +obj-y := +obj-m := +obj-n := +obj- := + +obj-$(CONFIG_CPU_S3C2416) += s3c2416.o +obj-$(CONFIG_CPU_S3C2416) += irq.o + +#obj-$(CONFIG_S3C2416_DMA) += dma.o + +# Machine support + diff --git a/arch/arm/mach-s3c2416/irq.c b/arch/arm/mach-s3c2416/irq.c new file mode 100644 index 000000000000..89f521d59d06 --- /dev/null +++ b/arch/arm/mach-s3c2416/irq.c @@ -0,0 +1,254 @@ +/* linux/arch/arm/mach-s3c2416/irq.c + * + * Copyright (c) 2009 Yauhen Kharuzhy , + * as part of OpenInkpot project + * Copyright (c) 2009 Promwad Innovation Company + * Yauhen Kharuzhy + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * +*/ + +#include +#include +#include +#include +#include +#include + +#include +#include + +#include + +#include +#include + +#include +#include +#include + +#define INTMSK(start, end) ((1 << ((end) + 1 - (start))) - 1) + +static inline void s3c2416_irq_demux(unsigned int irq, unsigned int len) +{ + unsigned int subsrc, submsk; + unsigned int end; + + /* read the current pending interrupts, and the mask + * for what it is available */ + + subsrc = __raw_readl(S3C2410_SUBSRCPND); + submsk = __raw_readl(S3C2410_INTSUBMSK); + + subsrc &= ~submsk; + subsrc >>= (irq - S3C2410_IRQSUB(0)); + subsrc &= (1 << len)-1; + + end = len + irq; + + for (; irq < end && subsrc; irq++) { + if (subsrc & 1) + generic_handle_irq(irq); + + subsrc >>= 1; + } +} + +/* WDT/AC97 sub interrupts */ + +static void s3c2416_irq_demux_wdtac97(unsigned int irq, struct irq_desc *desc) +{ + s3c2416_irq_demux(IRQ_S3C2443_WDT, 4); +} + +#define INTMSK_WDTAC97 (1UL << (IRQ_WDT - IRQ_EINT0)) +#define SUBMSK_WDTAC97 INTMSK(IRQ_S3C2443_WDT, IRQ_S3C2443_AC97) + +static void s3c2416_irq_wdtac97_mask(unsigned int irqno) +{ + s3c_irqsub_mask(irqno, INTMSK_WDTAC97, SUBMSK_WDTAC97); +} + +static void s3c2416_irq_wdtac97_unmask(unsigned int irqno) +{ + s3c_irqsub_unmask(irqno, INTMSK_WDTAC97); +} + +static void s3c2416_irq_wdtac97_ack(unsigned int irqno) +{ + s3c_irqsub_maskack(irqno, INTMSK_WDTAC97, SUBMSK_WDTAC97); +} + +static struct irq_chip s3c2416_irq_wdtac97 = { + .mask = s3c2416_irq_wdtac97_mask, + .unmask = s3c2416_irq_wdtac97_unmask, + .ack = s3c2416_irq_wdtac97_ack, +}; + + +/* LCD sub interrupts */ + +static void s3c2416_irq_demux_lcd(unsigned int irq, struct irq_desc *desc) +{ + s3c2416_irq_demux(IRQ_S3C2443_LCD1, 4); +} + +#define INTMSK_LCD (1UL << (IRQ_LCD - IRQ_EINT0)) +#define SUBMSK_LCD INTMSK(IRQ_S3C2443_LCD1, IRQ_S3C2443_LCD4) + +static void s3c2416_irq_lcd_mask(unsigned int irqno) +{ + s3c_irqsub_mask(irqno, INTMSK_LCD, SUBMSK_LCD); +} + +static void s3c2416_irq_lcd_unmask(unsigned int irqno) +{ + s3c_irqsub_unmask(irqno, INTMSK_LCD); +} + +static void s3c2416_irq_lcd_ack(unsigned int irqno) +{ + s3c_irqsub_maskack(irqno, INTMSK_LCD, SUBMSK_LCD); +} + +static struct irq_chip s3c2416_irq_lcd = { + .mask = s3c2416_irq_lcd_mask, + .unmask = s3c2416_irq_lcd_unmask, + .ack = s3c2416_irq_lcd_ack, +}; + + +/* DMA sub interrupts */ + +static void s3c2416_irq_demux_dma(unsigned int irq, struct irq_desc *desc) +{ + s3c2416_irq_demux(IRQ_S3C2443_DMA0, 6); +} + +#define INTMSK_DMA (1UL << (IRQ_S3C2443_DMA - IRQ_EINT0)) +#define SUBMSK_DMA INTMSK(IRQ_S3C2443_DMA0, IRQ_S3C2443_DMA5) + + +static void s3c2416_irq_dma_mask(unsigned int irqno) +{ + s3c_irqsub_mask(irqno, INTMSK_DMA, SUBMSK_DMA); +} + +static void s3c2416_irq_dma_unmask(unsigned int irqno) +{ + s3c_irqsub_unmask(irqno, INTMSK_DMA); +} + +static void s3c2416_irq_dma_ack(unsigned int irqno) +{ + s3c_irqsub_maskack(irqno, INTMSK_DMA, SUBMSK_DMA); +} + +static struct irq_chip s3c2416_irq_dma = { + .mask = s3c2416_irq_dma_mask, + .unmask = s3c2416_irq_dma_unmask, + .ack = s3c2416_irq_dma_ack, +}; + + +/* UART3 sub interrupts */ + +static void s3c2416_irq_demux_uart3(unsigned int irq, struct irq_desc *desc) +{ + s3c2416_irq_demux(IRQ_S3C2443_UART3, 3); +} + +#define INTMSK_UART3 (1UL << (IRQ_S3C2443_UART3 - IRQ_EINT0)) +#define SUBMSK_UART3 (0xf << (IRQ_S3C2443_RX3 - S3C2410_IRQSUB(0))) + + +static void s3c2416_irq_uart3_mask(unsigned int irqno) +{ + s3c_irqsub_mask(irqno, INTMSK_UART3, SUBMSK_UART3); +} + +static void s3c2416_irq_uart3_unmask(unsigned int irqno) +{ + s3c_irqsub_unmask(irqno, INTMSK_UART3); +} + +static void s3c2416_irq_uart3_ack(unsigned int irqno) +{ + s3c_irqsub_maskack(irqno, INTMSK_UART3, SUBMSK_UART3); +} + +static struct irq_chip s3c2416_irq_uart3 = { + .mask = s3c2416_irq_uart3_mask, + .unmask = s3c2416_irq_uart3_unmask, + .ack = s3c2416_irq_uart3_ack, +}; + + +/* IRQ initialisation code */ + +static int __init s3c2416_add_sub(unsigned int base, + void (*demux)(unsigned int, + struct irq_desc *), + struct irq_chip *chip, + unsigned int start, unsigned int end) +{ + unsigned int irqno; + + set_irq_chip(base, &s3c_irq_level_chip); + set_irq_handler(base, handle_level_irq); + set_irq_chained_handler(base, demux); + + for (irqno = start; irqno <= end; irqno++) { + set_irq_chip(irqno, chip); + set_irq_handler(irqno, handle_level_irq); + set_irq_flags(irqno, IRQF_VALID); + } + + return 0; +} + +static int __init s3c2416_irq_add(struct sys_device *sysdev) +{ + printk(KERN_INFO "S3C2416: IRQ Support\n"); + + s3c2416_add_sub(IRQ_LCD, s3c2416_irq_demux_lcd, &s3c2416_irq_lcd, + IRQ_S3C2443_LCD2, IRQ_S3C2443_LCD4); + + s3c2416_add_sub(IRQ_S3C2443_DMA, s3c2416_irq_demux_dma, + &s3c2416_irq_dma, IRQ_S3C2443_DMA0, IRQ_S3C2443_DMA5); + + s3c2416_add_sub(IRQ_S3C2443_UART3, s3c2416_irq_demux_uart3, + &s3c2416_irq_uart3, + IRQ_S3C2443_RX3, IRQ_S3C2443_ERR3); + + s3c2416_add_sub(IRQ_WDT, s3c2416_irq_demux_wdtac97, + &s3c2416_irq_wdtac97, + IRQ_S3C2443_WDT, IRQ_S3C2443_AC97); + + return 0; +} + +static struct sysdev_driver s3c2416_irq_driver = { + .add = s3c2416_irq_add, +}; + +static int __init s3c2416_irq_init(void) +{ + return sysdev_driver_register(&s3c2416_sysclass, &s3c2416_irq_driver); +} + +arch_initcall(s3c2416_irq_init); + diff --git a/arch/arm/mach-s3c2416/s3c2416.c b/arch/arm/mach-s3c2416/s3c2416.c new file mode 100644 index 000000000000..6165dc7010fe --- /dev/null +++ b/arch/arm/mach-s3c2416/s3c2416.c @@ -0,0 +1,115 @@ +/* linux/arch/arm/mach-s3c2416/s3c2416.c + * + * Copyright (c) 2009 Yauhen Kharuzhy , + * as part of OpenInkpot project + * Copyright (c) 2009 Promwad Innovation Company + * Yauhen Kharuzhy + * + * Samsung S3C2416 Mobile CPU support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +*/ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include +#include +#include + +#include +#include +#include + +#include +#include +#include + +static struct map_desc s3c2416_iodesc[] __initdata = { + IODESC_ENT(WATCHDOG), + IODESC_ENT(CLKPWR), + IODESC_ENT(TIMER), +}; + +struct sysdev_class s3c2416_sysclass = { + .name = "s3c2416-core", +}; + +static struct sys_device s3c2416_sysdev = { + .cls = &s3c2416_sysclass, +}; + +static void s3c2416_hard_reset(void) +{ + __raw_writel(S3C2443_SWRST_RESET, S3C2443_SWRST); +} + +int __init s3c2416_init(void) +{ + printk(KERN_INFO "S3C2416: Initializing architecture\n"); + + s3c24xx_reset_hook = s3c2416_hard_reset; + /* s3c24xx_idle = s3c2416_idle; */ + + /* change WDT IRQ number */ + s3c_device_wdt.resource[1].start = IRQ_S3C2443_WDT; + s3c_device_wdt.resource[1].end = IRQ_S3C2443_WDT; + + return sysdev_register(&s3c2416_sysdev); +} + +void __init s3c2416_init_uarts(struct s3c2410_uartcfg *cfg, int no) +{ + s3c24xx_init_uartdevs("s3c2440-uart", s3c2410_uart_resources, cfg, no); + + s3c_device_nand.name = "s3c2416-nand"; +} + +/* s3c2416_map_io + * + * register the standard cpu IO areas, and any passed in from the + * machine specific initialisation. + */ + +void __init s3c2416_map_io(void) +{ + iotable_init(s3c2416_iodesc, ARRAY_SIZE(s3c2416_iodesc)); +} + +/* need to register class before we actually register the device, and + * we also need to ensure that it has been initialised before any of the + * drivers even try to use it (even if not on an s3c2416 based system) + * as a driver which may support both 2443 and 2440 may try and use it. +*/ + +static int __init s3c2416_core_init(void) +{ + return sysdev_class_register(&s3c2416_sysclass); +} + +core_initcall(s3c2416_core_init); diff --git a/arch/arm/plat-s3c24xx/cpu.c b/arch/arm/plat-s3c24xx/cpu.c index 9ca64df35bf6..494f4f3a9332 100644 --- a/arch/arm/plat-s3c24xx/cpu.c +++ b/arch/arm/plat-s3c24xx/cpu.c @@ -49,6 +49,7 @@ #include #include #include +#include #include #include @@ -57,6 +58,7 @@ static const char name_s3c2400[] = "S3C2400"; static const char name_s3c2410[] = "S3C2410"; static const char name_s3c2412[] = "S3C2412"; +static const char name_s3c2416[] = "S3C2416"; static const char name_s3c2440[] = "S3C2440"; static const char name_s3c2442[] = "S3C2442"; static const char name_s3c2442b[] = "S3C2442B"; @@ -137,6 +139,15 @@ static struct cpu_table cpu_ids[] __initdata = { .init = s3c2412_init, .name = name_s3c2412, }, + { /* a strange version of the s3c2416 */ + .idcode = 0x32450003, + .idmask = 0xffffffff, + .map_io = s3c2416_map_io, + .init_clocks = s3c2416_init_clocks, + .init_uarts = s3c2416_init_uarts, + .init = s3c2416_init, + .name = name_s3c2416, + }, { .idcode = 0x32443001, .idmask = 0xffffffff, @@ -172,6 +183,8 @@ static unsigned long s3c24xx_read_idcode_v5(void) { #if defined(CONFIG_CPU_S3C2412) || defined(CONFIG_CPU_S3C2413) return __raw_readl(S3C2412_GSTATUS1); +#elif defined(CONFIG_CPU_S3C2416) + return __raw_readl(S3C24XX_GSTATUS1); #else return 1UL; /* don't look like an 2400 */ #endif diff --git a/arch/arm/plat-s3c24xx/include/plat/s3c2416.h b/arch/arm/plat-s3c24xx/include/plat/s3c2416.h new file mode 100644 index 000000000000..dc3c0907d221 --- /dev/null +++ b/arch/arm/plat-s3c24xx/include/plat/s3c2416.h @@ -0,0 +1,31 @@ +/* linux/include/asm-arm/plat-s3c24xx/s3c2443.h + * + * Copyright (c) 2009 Yauhen Kharuzhy + * + * Header file for s3c2416 cpu support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifdef CONFIG_CPU_S3C2416 + +struct s3c2410_uartcfg; + +extern int s3c2416_init(void); + +extern void s3c2416_map_io(void); + +extern void s3c2416_init_uarts(struct s3c2410_uartcfg *cfg, int no); + +extern void s3c2416_init_clocks(int xtal); + +extern int s3c2416_baseclk_add(void); + +#else +#define s3c2416_init_clocks NULL +#define s3c2416_init_uarts NULL +#define s3c2416_map_io NULL +#define s3c2416_init NULL +#endif diff --git a/arch/arm/plat-samsung/include/plat/cpu.h b/arch/arm/plat-samsung/include/plat/cpu.h index d316b4a579f4..5dbeb7991e60 100644 --- a/arch/arm/plat-samsung/include/plat/cpu.h +++ b/arch/arm/plat-samsung/include/plat/cpu.h @@ -73,6 +73,7 @@ extern struct sys_timer s3c24xx_timer; extern struct sysdev_class s3c2410_sysclass; extern struct sysdev_class s3c2410a_sysclass; extern struct sysdev_class s3c2412_sysclass; +extern struct sysdev_class s3c2416_sysclass; extern struct sysdev_class s3c2440_sysclass; extern struct sysdev_class s3c2442_sysclass; extern struct sysdev_class s3c2443_sysclass; -- cgit v1.2.3 From d24131470f3def698683144cf1e81ee0f4f9c0b8 Mon Sep 17 00:00:00 2001 From: Yauhen Kharuzhy Date: Wed, 19 Aug 2009 16:31:07 +0300 Subject: ARM: S3C2416: Add initial support of SMDK2416 Add support of SMDK2416 development board. Signed-off-by: Yauhen Kharuzhy Signed-off-by: Ben Dooks --- arch/arm/mach-s3c2416/Kconfig | 6 ++ arch/arm/mach-s3c2416/Makefile | 1 + arch/arm/mach-s3c2416/mach-smdk2416.c | 144 ++++++++++++++++++++++++++++++++++ 3 files changed, 151 insertions(+) create mode 100644 arch/arm/mach-s3c2416/mach-smdk2416.c diff --git a/arch/arm/mach-s3c2416/Kconfig b/arch/arm/mach-s3c2416/Kconfig index cc320f6b7372..528f27348b68 100644 --- a/arch/arm/mach-s3c2416/Kconfig +++ b/arch/arm/mach-s3c2416/Kconfig @@ -21,5 +21,11 @@ config S3C2416_DMA menu "S3C2416 Machines" +config MACH_SMDK2416 + bool "SMDK2416" + select CPU_S3C2416 + select S3C_DEV_HSMMC + help + Say Y here if you are using an SMDK2416 endmenu diff --git a/arch/arm/mach-s3c2416/Makefile b/arch/arm/mach-s3c2416/Makefile index 34bb70d44d50..9183e81037ca 100644 --- a/arch/arm/mach-s3c2416/Makefile +++ b/arch/arm/mach-s3c2416/Makefile @@ -16,3 +16,4 @@ obj-$(CONFIG_CPU_S3C2416) += irq.o # Machine support +obj-$(CONFIG_MACH_SMDK2416) += mach-smdk2416.o diff --git a/arch/arm/mach-s3c2416/mach-smdk2416.c b/arch/arm/mach-s3c2416/mach-smdk2416.c new file mode 100644 index 000000000000..8c9aed69d415 --- /dev/null +++ b/arch/arm/mach-s3c2416/mach-smdk2416.c @@ -0,0 +1,144 @@ +/* linux/arch/arm/mach-s3c2416/mach-hanlin_v3c.c + * + * Copyright (c) 2009 Yauhen Kharuzhy , + * as part of OpenInkpot project + * Copyright (c) 2009 Promwad Innovation Company + * Yauhen Kharuzhy + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * +*/ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include +#include +#include + +#include +#include +#include + +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +#include + +static struct map_desc smdk2416_iodesc[] __initdata = { + /* ISA IO Space map (memory space selected by A24) */ + + { + .virtual = (u32)S3C24XX_VA_ISA_WORD, + .pfn = __phys_to_pfn(S3C2410_CS2), + .length = 0x10000, + .type = MT_DEVICE, + }, { + .virtual = (u32)S3C24XX_VA_ISA_WORD + 0x10000, + .pfn = __phys_to_pfn(S3C2410_CS2 + (1<<24)), + .length = SZ_4M, + .type = MT_DEVICE, + }, { + .virtual = (u32)S3C24XX_VA_ISA_BYTE, + .pfn = __phys_to_pfn(S3C2410_CS2), + .length = 0x10000, + .type = MT_DEVICE, + }, { + .virtual = (u32)S3C24XX_VA_ISA_BYTE + 0x10000, + .pfn = __phys_to_pfn(S3C2410_CS2 + (1<<24)), + .length = SZ_4M, + .type = MT_DEVICE, + } +}; + +#define UCON (S3C2410_UCON_DEFAULT | \ + S3C2440_UCON_PCLK | \ + S3C2443_UCON_RXERR_IRQEN) + +#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE) + +#define UFCON (S3C2410_UFCON_RXTRIG8 | \ + S3C2410_UFCON_FIFOMODE | \ + S3C2440_UFCON_TXTRIG16) + +static struct s3c2410_uartcfg smdk2416_uartcfgs[] __initdata = { + [0] = { + .hwport = 0, + .flags = 0, + .ucon = UCON, + .ulcon = ULCON, + .ufcon = UFCON, + }, + [1] = { + .hwport = 1, + .flags = 0, + .ucon = UCON, + .ulcon = ULCON, + .ufcon = UFCON, + }, + /* IR port */ + [2] = { + .hwport = 2, + .flags = 0, + .ucon = UCON, + .ulcon = ULCON | 0x50, + .ufcon = UFCON, + } +}; + +static struct platform_device *smdk2416_devices[] __initdata = { + &s3c_device_wdt, + &s3c_device_i2c0, + &s3c_device_hsmmc0, +}; + +static void __init smdk2416_map_io(void) +{ + + s3c24xx_init_io(smdk2416_iodesc, ARRAY_SIZE(smdk2416_iodesc)); + s3c24xx_init_clocks(12000000); + s3c24xx_init_uarts(smdk2416_uartcfgs, ARRAY_SIZE(smdk2416_uartcfgs)); + +} + +static void __init smdk2416_machine_init(void) +{ + s3c_i2c0_set_platdata(NULL); + + platform_add_devices(smdk2416_devices, ARRAY_SIZE(smdk2416_devices)); + smdk_machine_init(); +} + +MACHINE_START(SMDK2416, "SMDK2416") + /* Maintainer: Yauhen Kharuzhy */ + .phys_io = S3C2410_PA_UART, + .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc, + .boot_params = S3C2410_SDRAM_PA + 0x100, + + .init_irq = s3c24xx_init_irq, + .map_io = smdk2416_map_io, + .init_machine = smdk2416_machine_init, + .timer = &s3c24xx_timer, +MACHINE_END -- cgit v1.2.3 From d11a7d7100123d178821f82ecc11ba2d9d6e97c8 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Wed, 28 Apr 2010 18:00:07 +0900 Subject: ARM: S3C24XX: Identify S3C2416 if S3C2412/S3C2413 built in Extend the ARMv5 ID code to deal with S3C2416 being built with S3C2412/S3C2413 enabled, as these have their ID registers in a different place. Signed-off-by: Ben Dooks --- arch/arm/plat-s3c24xx/cpu.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) diff --git a/arch/arm/plat-s3c24xx/cpu.c b/arch/arm/plat-s3c24xx/cpu.c index 494f4f3a9332..32db85651af0 100644 --- a/arch/arm/plat-s3c24xx/cpu.c +++ b/arch/arm/plat-s3c24xx/cpu.c @@ -181,10 +181,18 @@ static struct map_desc s3c_iodesc[] __initdata = { static unsigned long s3c24xx_read_idcode_v5(void) { +#if defined(CONFIG_CPU_S3C2416) + /* s3c2416 is v5, with S3C24XX_GSTATUS1 instead of S3C2412_GSTATUS1 */ + + u32 gs = __raw_readl(S3C24XX_GSTATUS1); + + /* test for s3c2416 or similar device */ + if ((gs >> 16) == 0x3245) + return gs; +#endif + #if defined(CONFIG_CPU_S3C2412) || defined(CONFIG_CPU_S3C2413) return __raw_readl(S3C2412_GSTATUS1); -#elif defined(CONFIG_CPU_S3C2416) - return __raw_readl(S3C24XX_GSTATUS1); #else return 1UL; /* don't look like an 2400 */ #endif -- cgit v1.2.3 From af337f3e633a198034a99450416257ddf2307497 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Wed, 28 Apr 2010 18:03:57 +0900 Subject: ARM: S3C2443: Move parts of the clock code to common clock file To share code with some of the newer parts such as the S3C2416, move parts of arch/arm/mach-s3c2443/clock.c to a common file called arch/arm/plat-s3c24xx/s3c2443-clock.c. Update the build configuration to deal with this new file. Signed-off-by: Ben Dooks --- arch/arm/mach-s3c2443/Kconfig | 1 + arch/arm/mach-s3c2443/clock.c | 452 +------------------------ arch/arm/plat-s3c24xx/Kconfig | 6 + arch/arm/plat-s3c24xx/Makefile | 1 + arch/arm/plat-s3c24xx/include/plat/s3c2443.h | 19 ++ arch/arm/plat-s3c24xx/s3c2443-clock.c | 472 +++++++++++++++++++++++++++ 6 files changed, 505 insertions(+), 446 deletions(-) create mode 100644 arch/arm/plat-s3c24xx/s3c2443-clock.c diff --git a/arch/arm/mach-s3c2443/Kconfig b/arch/arm/mach-s3c2443/Kconfig index 698140af247c..4fef723126fa 100644 --- a/arch/arm/mach-s3c2443/Kconfig +++ b/arch/arm/mach-s3c2443/Kconfig @@ -8,6 +8,7 @@ config CPU_S3C2443 select S3C2443_DMA if S3C2410_DMA select CPU_LLSERIAL_S3C2440 select SAMSUNG_CLKSRC + select S3C2443_CLOCK help Support for the S3C2443 SoC from the S3C24XX line diff --git a/arch/arm/mach-s3c2443/clock.c b/arch/arm/mach-s3c2443/clock.c index 76d8d66247c3..83b1aa63d778 100644 --- a/arch/arm/mach-s3c2443/clock.c +++ b/arch/arm/mach-s3c2443/clock.c @@ -21,6 +21,7 @@ */ #include + #include #include #include @@ -54,111 +55,13 @@ * set the correct muxing at initialisation */ -static int s3c2443_gate(void __iomem *reg, struct clk *clk, int enable) -{ - u32 ctrlbit = clk->ctrlbit; - u32 con = __raw_readl(reg); - - if (enable) - con |= ctrlbit; - else - con &= ~ctrlbit; - - __raw_writel(con, reg); - return 0; -} - -static int s3c2443_clkcon_enable_h(struct clk *clk, int enable) -{ - return s3c2443_gate(S3C2443_HCLKCON, clk, enable); -} - -static int s3c2443_clkcon_enable_p(struct clk *clk, int enable) -{ - return s3c2443_gate(S3C2443_PCLKCON, clk, enable); -} - -static int s3c2443_clkcon_enable_s(struct clk *clk, int enable) -{ - return s3c2443_gate(S3C2443_SCLKCON, clk, enable); -} - /* clock selections */ -/* mpllref is a direct descendant of clk_xtal by default, but it is not - * elided as the EPLL can be either sourced by the XTAL or EXTCLK and as - * such directly equating the two source clocks is impossible. - */ -static struct clk clk_mpllref = { - .name = "mpllref", - .parent = &clk_xtal, - .id = -1, -}; - static struct clk clk_i2s_ext = { .name = "i2s-ext", .id = -1, }; -static struct clk *clk_epllref_sources[] = { - [0] = &clk_mpllref, - [1] = &clk_mpllref, - [2] = &clk_xtal, - [3] = &clk_ext, -}; - -static struct clksrc_clk clk_epllref = { - .clk = { - .name = "epllref", - .id = -1, - }, - .sources = &(struct clksrc_sources) { - .sources = clk_epllref_sources, - .nr_sources = ARRAY_SIZE(clk_epllref_sources), - }, - .reg_src = { .reg = S3C2443_CLKSRC, .size = 2, .shift = 7 }, -}; - -static unsigned long s3c2443_getrate_mdivclk(struct clk *clk) -{ - unsigned long parent_rate = clk_get_rate(clk->parent); - unsigned long div = __raw_readl(S3C2443_CLKDIV0); - - div &= S3C2443_CLKDIV0_EXTDIV_MASK; - div >>= (S3C2443_CLKDIV0_EXTDIV_SHIFT-1); /* x2 */ - - return parent_rate / (div + 1); -} - -static struct clk clk_mdivclk = { - .name = "mdivclk", - .parent = &clk_mpllref, - .id = -1, - .ops = &(struct clk_ops) { - .get_rate = s3c2443_getrate_mdivclk, - }, -}; - -static struct clk *clk_msysclk_sources[] = { - [0] = &clk_mpllref, - [1] = &clk_mpll, - [2] = &clk_mdivclk, - [3] = &clk_mpllref, -}; - -static struct clksrc_clk clk_msysclk = { - .clk = { - .name = "msysclk", - .parent = &clk_xtal, - .id = -1, - }, - .sources = &(struct clksrc_sources) { - .sources = clk_msysclk_sources, - .nr_sources = ARRAY_SIZE(clk_msysclk_sources), - }, - .reg_src = { .reg = S3C2443_CLKSRC, .size = 2, .shift = 3 }, -}; - /* armdiv * * this clock is sourced from msysclk and can have a number of @@ -266,44 +169,6 @@ static struct clksrc_clk clk_arm = { .reg_src = { .reg = S3C2443_CLKDIV0, .size = 1, .shift = 13 }, }; -/* esysclk - * - * this is sourced from either the EPLL or the EPLLref clock -*/ - -static struct clk *clk_sysclk_sources[] = { - [0] = &clk_epllref.clk, - [1] = &clk_epll, -}; - -static struct clksrc_clk clk_esysclk = { - .clk = { - .name = "esysclk", - .parent = &clk_epll, - .id = -1, - }, - .sources = &(struct clksrc_sources) { - .sources = clk_sysclk_sources, - .nr_sources = ARRAY_SIZE(clk_sysclk_sources), - }, - .reg_src = { .reg = S3C2443_CLKSRC, .size = 1, .shift = 6 }, -}; - -/* uartclk - * - * UART baud-rate clock sourced from esysclk via a divisor -*/ - -static struct clksrc_clk clk_uart = { - .clk = { - .name = "uartclk", - .id = -1, - .parent = &clk_esysclk.clk, - }, - .reg_div = { .reg = S3C2443_CLKDIV1, .size = 4, .shift = 8 }, -}; - - /* hsspi * * high-speed spi clock, sourced from esysclk @@ -320,21 +185,6 @@ static struct clksrc_clk clk_hsspi = { .reg_div = { .reg = S3C2443_CLKDIV1, .size = 2, .shift = 4 }, }; -/* usbhost - * - * usb host bus-clock, usually 48MHz to provide USB bus clock timing -*/ - -static struct clksrc_clk clk_usb_bus_host = { - .clk = { - .name = "usb-bus-host-parent", - .id = -1, - .parent = &clk_esysclk.clk, - .ctrlbit = S3C2443_SCLKCON_USBHOST, - .enable = s3c2443_clkcon_enable_s, - }, - .reg_div = { .reg = S3C2443_CLKDIV1, .size = 2, .shift = 4 }, -}; /* clk_hsmcc_div * @@ -433,88 +283,15 @@ static struct clksrc_clk clk_i2s = { .reg_src = { .reg = S3C2443_CLKSRC, .size = 2, .shift = 14 }, }; -/* cam-if - * - * camera interface bus-clock, divided down from esysclk -*/ - -static struct clksrc_clk clk_cam = { - .clk = { - .name = "camif-upll", /* same as 2440 name */ - .id = -1, - .parent = &clk_esysclk.clk, - .ctrlbit = S3C2443_SCLKCON_CAMCLK, - .enable = s3c2443_clkcon_enable_s, - }, - .reg_div = { .reg = S3C2443_CLKDIV1, .size = 4, .shift = 26 }, -}; - -/* display-if - * - * display interface clock, divided from esysclk -*/ - -static struct clksrc_clk clk_display = { - .clk = { - .name = "display-if", - .id = -1, - .parent = &clk_esysclk.clk, - .ctrlbit = S3C2443_SCLKCON_DISPCLK, - .enable = s3c2443_clkcon_enable_s, - }, - .reg_div = { .reg = S3C2443_CLKDIV1, .size = 8, .shift = 16 }, -}; - -/* prediv - * - * this divides the msysclk down to pass to h/p/etc. - */ - -static unsigned long s3c2443_prediv_getrate(struct clk *clk) -{ - unsigned long rate = clk_get_rate(clk->parent); - unsigned long clkdiv0 = __raw_readl(S3C2443_CLKDIV0); - - clkdiv0 &= S3C2443_CLKDIV0_PREDIV_MASK; - clkdiv0 >>= S3C2443_CLKDIV0_PREDIV_SHIFT; - - return rate / (clkdiv0 + 1); -} - -static struct clk clk_prediv = { - .name = "prediv", - .id = -1, - .parent = &clk_msysclk.clk, - .ops = &(struct clk_ops) { - .get_rate = s3c2443_prediv_getrate, - }, -}; - /* standard clock definitions */ static struct clk init_clocks_off[] = { { - .name = "nand", - .id = -1, - .parent = &clk_h, - }, { .name = "sdi", .id = -1, .parent = &clk_p, .enable = s3c2443_clkcon_enable_p, .ctrlbit = S3C2443_PCLKCON_SDI, - }, { - .name = "adc", - .id = -1, - .parent = &clk_p, - .enable = s3c2443_clkcon_enable_p, - .ctrlbit = S3C2443_PCLKCON_ADC, - }, { - .name = "i2c", - .id = -1, - .parent = &clk_p, - .enable = s3c2443_clkcon_enable_p, - .ctrlbit = S3C2443_PCLKCON_IIC, }, { .name = "iis", .id = -1, @@ -537,179 +314,12 @@ static struct clk init_clocks_off[] = { }; static struct clk init_clocks[] = { - { - .name = "dma", - .id = 0, - .parent = &clk_h, - .enable = s3c2443_clkcon_enable_h, - .ctrlbit = S3C2443_HCLKCON_DMA0, - }, { - .name = "dma", - .id = 1, - .parent = &clk_h, - .enable = s3c2443_clkcon_enable_h, - .ctrlbit = S3C2443_HCLKCON_DMA1, - }, { - .name = "dma", - .id = 2, - .parent = &clk_h, - .enable = s3c2443_clkcon_enable_h, - .ctrlbit = S3C2443_HCLKCON_DMA2, - }, { - .name = "dma", - .id = 3, - .parent = &clk_h, - .enable = s3c2443_clkcon_enable_h, - .ctrlbit = S3C2443_HCLKCON_DMA3, - }, { - .name = "dma", - .id = 4, - .parent = &clk_h, - .enable = s3c2443_clkcon_enable_h, - .ctrlbit = S3C2443_HCLKCON_DMA4, - }, { - .name = "dma", - .id = 5, - .parent = &clk_h, - .enable = s3c2443_clkcon_enable_h, - .ctrlbit = S3C2443_HCLKCON_DMA5, - }, { - .name = "lcd", - .id = -1, - .parent = &clk_h, - .enable = s3c2443_clkcon_enable_h, - .ctrlbit = S3C2443_HCLKCON_LCDC, - }, { - .name = "gpio", - .id = -1, - .parent = &clk_p, - .enable = s3c2443_clkcon_enable_p, - .ctrlbit = S3C2443_PCLKCON_GPIO, - }, { - .name = "usb-host", - .id = -1, - .parent = &clk_h, - .enable = s3c2443_clkcon_enable_h, - .ctrlbit = S3C2443_HCLKCON_USBH, - }, { - .name = "usb-device", - .id = -1, - .parent = &clk_h, - .enable = s3c2443_clkcon_enable_h, - .ctrlbit = S3C2443_HCLKCON_USBD, - }, { - .name = "hsmmc", - .id = -1, - .parent = &clk_h, - .enable = s3c2443_clkcon_enable_h, - .ctrlbit = S3C2443_HCLKCON_HSMMC, - }, { - .name = "cfc", - .id = -1, - .parent = &clk_h, - .enable = s3c2443_clkcon_enable_h, - .ctrlbit = S3C2443_HCLKCON_CFC, - }, { - .name = "ssmc", - .id = -1, - .parent = &clk_h, - .enable = s3c2443_clkcon_enable_h, - .ctrlbit = S3C2443_HCLKCON_SSMC, - }, { - .name = "timers", - .id = -1, - .parent = &clk_p, - .enable = s3c2443_clkcon_enable_p, - .ctrlbit = S3C2443_PCLKCON_PWMT, - }, { - .name = "uart", - .id = 0, - .parent = &clk_p, - .enable = s3c2443_clkcon_enable_p, - .ctrlbit = S3C2443_PCLKCON_UART0, - }, { - .name = "uart", - .id = 1, - .parent = &clk_p, - .enable = s3c2443_clkcon_enable_p, - .ctrlbit = S3C2443_PCLKCON_UART1, - }, { - .name = "uart", - .id = 2, - .parent = &clk_p, - .enable = s3c2443_clkcon_enable_p, - .ctrlbit = S3C2443_PCLKCON_UART2, - }, { - .name = "uart", - .id = 3, - .parent = &clk_p, - .enable = s3c2443_clkcon_enable_p, - .ctrlbit = S3C2443_PCLKCON_UART3, - }, { - .name = "rtc", - .id = -1, - .parent = &clk_p, - .enable = s3c2443_clkcon_enable_p, - .ctrlbit = S3C2443_PCLKCON_RTC, - }, { - .name = "watchdog", - .id = -1, - .parent = &clk_p, - .ctrlbit = S3C2443_PCLKCON_WDT, - }, { - .name = "usb-bus-host", - .id = -1, - .parent = &clk_usb_bus_host.clk, - }, { - .name = "ac97", - .id = -1, - .parent = &clk_p, - .ctrlbit = S3C2443_PCLKCON_AC97, - } }; -/* clocks to add where we need to check their parentage */ - -static struct clksrc_clk __initdata *init_list[] = { - &clk_epllref, /* should be first */ - &clk_esysclk, - &clk_msysclk, - &clk_arm, - &clk_i2s_eplldiv, - &clk_i2s, - &clk_cam, - &clk_uart, - &clk_display, - &clk_hsmmc_div, - &clk_usb_bus_host, -}; - -static void __init s3c2443_clk_initparents(void) -{ - int ptr; - - for (ptr = 0; ptr < ARRAY_SIZE(init_list); ptr++) - s3c_set_clksrc(init_list[ptr], true); -} - -static inline unsigned long s3c2443_get_hdiv(unsigned long clkcon0) -{ - clkcon0 &= S3C2443_CLKDIV0_HCLKDIV_MASK; - - return clkcon0 + 1; -} - /* clocks to add straight away */ static struct clksrc_clk *clksrcs[] __initdata = { - &clk_usb_bus_host, - &clk_epllref, - &clk_esysclk, - &clk_msysclk, &clk_arm, - &clk_uart, - &clk_display, - &clk_cam, &clk_i2s_eplldiv, &clk_i2s, &clk_hsspi, @@ -717,46 +327,13 @@ static struct clksrc_clk *clksrcs[] __initdata = { }; static struct clk *clks[] __initdata = { - &clk_ext, - &clk_epll, - &clk_usb_bus, - &clk_mpllref, &clk_hsmmc, &clk_armdiv, - &clk_prediv, }; void __init_or_cpufreq s3c2443_setup_clocks(void) { - unsigned long mpllcon = __raw_readl(S3C2443_MPLLCON); - unsigned long clkdiv0 = __raw_readl(S3C2443_CLKDIV0); - struct clk *xtal_clk; - unsigned long xtal; - unsigned long pll; - unsigned long fclk; - unsigned long hclk; - unsigned long pclk; - - xtal_clk = clk_get(NULL, "xtal"); - xtal = clk_get_rate(xtal_clk); - clk_put(xtal_clk); - - pll = s3c2443_get_mpll(mpllcon, xtal); - clk_msysclk.clk.rate = pll; - - fclk = pll / s3c2443_fclk_div(clkdiv0); - hclk = s3c2443_prediv_getrate(&clk_prediv); - hclk /= s3c2443_get_hdiv(clkdiv0); - pclk = hclk / ((clkdiv0 & S3C2443_CLKDIV0_HALF_PCLK) ? 2 : 1); - - s3c24xx_setup_clocks(fclk, hclk, pclk); - - printk("S3C2443: mpll %s %ld.%03ld MHz, cpu %ld.%03ld MHz, mem %ld.%03ld MHz, pclk %ld.%03ld MHz\n", - (mpllcon & S3C2443_PLLCON_OFF) ? "off":"on", - print_mhz(pll), print_mhz(fclk), - print_mhz(hclk), print_mhz(pclk)); - - s3c24xx_setup_clocks(fclk, hclk, pclk); + s3c2443_common_setup_clocks(s3c2443_get_mpll, s3c2443_fclk_div); } void __init s3c2443_init_clocks(int xtal) @@ -764,35 +341,18 @@ void __init s3c2443_init_clocks(int xtal) unsigned long epllcon = __raw_readl(S3C2443_EPLLCON); int ptr; - /* s3c2443 parents h and p clocks from prediv */ - clk_h.parent = &clk_prediv; - clk_p.parent = &clk_prediv; + clk_epll.rate = s3c2443_get_epll(epllcon, xtal); + clk_epll.parent = &clk_epllref.clk; + + s3c2443_common_init_clocks(xtal, s3c2443_get_mpll, s3c2443_fclk_div); - s3c24xx_register_baseclocks(xtal); s3c2443_setup_clocks(); - s3c2443_clk_initparents(); s3c24xx_register_clocks(clks, ARRAY_SIZE(clks)); for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++) s3c_register_clksrc(clksrcs[ptr], 1); - clk_epll.rate = s3c2443_get_epll(epllcon, xtal); - clk_epll.parent = &clk_epllref.clk; - clk_usb_bus.parent = &clk_usb_bus_host.clk; - - /* ensure usb bus clock is within correct rate of 48MHz */ - - if (clk_get_rate(&clk_usb_bus_host.clk) != (48 * 1000 * 1000)) { - printk(KERN_INFO "Warning: USB host bus not at 48MHz\n"); - clk_set_rate(&clk_usb_bus_host.clk, 48*1000*1000); - } - - printk("S3C2443: epll %s %ld.%03ld MHz, usb-bus %ld.%03ld MHz\n", - (epllcon & S3C2443_PLLCON_OFF) ? "off":"on", - print_mhz(clk_get_rate(&clk_epll)), - print_mhz(clk_get_rate(&clk_usb_bus))); - /* register clocks from clock array */ s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks)); diff --git a/arch/arm/plat-s3c24xx/Kconfig b/arch/arm/plat-s3c24xx/Kconfig index a830fad6f89e..3ce8f010b3c6 100644 --- a/arch/arm/plat-s3c24xx/Kconfig +++ b/arch/arm/plat-s3c24xx/Kconfig @@ -45,6 +45,12 @@ config S3C2410_CLOCK Clock code for the S3C2410, and similar processors which is currently includes the S3C2410, S3C2440, S3C2442. +config S3C2443_CLOCK + bool + help + Clock code for the S3C2443 and similar processors, which includes + the S3C2416 and S3C2450. + config S3C24XX_DCLK bool help diff --git a/arch/arm/plat-s3c24xx/Makefile b/arch/arm/plat-s3c24xx/Makefile index c2237c41141f..44aea8868f89 100644 --- a/arch/arm/plat-s3c24xx/Makefile +++ b/arch/arm/plat-s3c24xx/Makefile @@ -30,6 +30,7 @@ obj-$(CONFIG_PM) += pm.o obj-$(CONFIG_PM) += irq-pm.o obj-$(CONFIG_PM) += sleep.o obj-$(CONFIG_S3C2410_CLOCK) += s3c2410-clock.o +obj-$(CONFIG_S3C2443_CLOCK) += s3c2443-clock.o obj-$(CONFIG_S3C2410_DMA) += dma.o obj-$(CONFIG_S3C2410_IOTIMING) += s3c2410-iotiming.o obj-$(CONFIG_S3C2412_IOTIMING) += s3c2412-iotiming.o diff --git a/arch/arm/plat-s3c24xx/include/plat/s3c2443.h b/arch/arm/plat-s3c24xx/include/plat/s3c2443.h index 815b107ed890..a19715feb798 100644 --- a/arch/arm/plat-s3c24xx/include/plat/s3c2443.h +++ b/arch/arm/plat-s3c24xx/include/plat/s3c2443.h @@ -30,3 +30,22 @@ extern int s3c2443_baseclk_add(void); #define s3c2443_map_io NULL #define s3c2443_init NULL #endif + +/* common code used by s3c2443 and others. + * note, not to be used outside of arch/arm/mach-s3c* */ + +struct clk; /* some files don't need clk.h otherwise */ + +typedef unsigned int (*pll_fn)(unsigned int reg, unsigned int base); +typedef unsigned int (*fdiv_fn)(unsigned long clkcon0); + +extern void s3c2443_common_setup_clocks(pll_fn get_mpll, fdiv_fn fdiv); +extern void s3c2443_common_init_clocks(int xtal, pll_fn get_mpll, fdiv_fn fdiv); + +extern int s3c2443_clkcon_enable_h(struct clk *clk, int enable); +extern int s3c2443_clkcon_enable_p(struct clk *clk, int enable); +extern int s3c2443_clkcon_enable_s(struct clk *clk, int enable); + +extern struct clksrc_clk clk_epllref; +extern struct clksrc_clk clk_esysclk; +extern struct clksrc_clk clk_msysclk; diff --git a/arch/arm/plat-s3c24xx/s3c2443-clock.c b/arch/arm/plat-s3c24xx/s3c2443-clock.c new file mode 100644 index 000000000000..461f070eb62d --- /dev/null +++ b/arch/arm/plat-s3c24xx/s3c2443-clock.c @@ -0,0 +1,472 @@ +/* linux/arch/arm/plat-s3c24xx/s3c2443-clock.c + * + * Copyright (c) 2007, 2010 Simtec Electronics + * Ben Dooks + * + * S3C2443 Clock control suport - common code + */ + +#include +#include +#include + +#include + +#include +#include +#include +#include + +#include + + +static int s3c2443_gate(void __iomem *reg, struct clk *clk, int enable) +{ + u32 ctrlbit = clk->ctrlbit; + u32 con = __raw_readl(reg); + + if (enable) + con |= ctrlbit; + else + con &= ~ctrlbit; + + __raw_writel(con, reg); + return 0; +} + +int s3c2443_clkcon_enable_h(struct clk *clk, int enable) +{ + return s3c2443_gate(S3C2443_HCLKCON, clk, enable); +} + +int s3c2443_clkcon_enable_p(struct clk *clk, int enable) +{ + return s3c2443_gate(S3C2443_PCLKCON, clk, enable); +} + +int s3c2443_clkcon_enable_s(struct clk *clk, int enable) +{ + return s3c2443_gate(S3C2443_SCLKCON, clk, enable); +} + +/* mpllref is a direct descendant of clk_xtal by default, but it is not + * elided as the EPLL can be either sourced by the XTAL or EXTCLK and as + * such directly equating the two source clocks is impossible. + */ +struct clk clk_mpllref = { + .name = "mpllref", + .parent = &clk_xtal, + .id = -1, +}; + +static struct clk *clk_epllref_sources[] = { + [0] = &clk_mpllref, + [1] = &clk_mpllref, + [2] = &clk_xtal, + [3] = &clk_ext, +}; + +struct clksrc_clk clk_epllref = { + .clk = { + .name = "epllref", + .id = -1, + }, + .sources = &(struct clksrc_sources) { + .sources = clk_epllref_sources, + .nr_sources = ARRAY_SIZE(clk_epllref_sources), + }, + .reg_src = { .reg = S3C2443_CLKSRC, .size = 2, .shift = 7 }, +}; + +/* esysclk + * + * this is sourced from either the EPLL or the EPLLref clock +*/ + +static struct clk *clk_sysclk_sources[] = { + [0] = &clk_epllref.clk, + [1] = &clk_epll, +}; + +struct clksrc_clk clk_esysclk = { + .clk = { + .name = "esysclk", + .parent = &clk_epll, + .id = -1, + }, + .sources = &(struct clksrc_sources) { + .sources = clk_sysclk_sources, + .nr_sources = ARRAY_SIZE(clk_sysclk_sources), + }, + .reg_src = { .reg = S3C2443_CLKSRC, .size = 1, .shift = 6 }, +}; + +static unsigned long s3c2443_getrate_mdivclk(struct clk *clk) +{ + unsigned long parent_rate = clk_get_rate(clk->parent); + unsigned long div = __raw_readl(S3C2443_CLKDIV0); + + div &= S3C2443_CLKDIV0_EXTDIV_MASK; + div >>= (S3C2443_CLKDIV0_EXTDIV_SHIFT-1); /* x2 */ + + return parent_rate / (div + 1); +} + +static struct clk clk_mdivclk = { + .name = "mdivclk", + .parent = &clk_mpllref, + .id = -1, + .ops = &(struct clk_ops) { + .get_rate = s3c2443_getrate_mdivclk, + }, +}; + +static struct clk *clk_msysclk_sources[] = { + [0] = &clk_mpllref, + [1] = &clk_mpll, + [2] = &clk_mdivclk, + [3] = &clk_mpllref, +}; + +struct clksrc_clk clk_msysclk = { + .clk = { + .name = "msysclk", + .parent = &clk_xtal, + .id = -1, + }, + .sources = &(struct clksrc_sources) { + .sources = clk_msysclk_sources, + .nr_sources = ARRAY_SIZE(clk_msysclk_sources), + }, + .reg_src = { .reg = S3C2443_CLKSRC, .size = 2, .shift = 3 }, +}; + +/* prediv + * + * this divides the msysclk down to pass to h/p/etc. + */ + +static unsigned long s3c2443_prediv_getrate(struct clk *clk) +{ + unsigned long rate = clk_get_rate(clk->parent); + unsigned long clkdiv0 = __raw_readl(S3C2443_CLKDIV0); + + clkdiv0 &= S3C2443_CLKDIV0_PREDIV_MASK; + clkdiv0 >>= S3C2443_CLKDIV0_PREDIV_SHIFT; + + return rate / (clkdiv0 + 1); +} + +static struct clk clk_prediv = { + .name = "prediv", + .id = -1, + .parent = &clk_msysclk.clk, + .ops = &(struct clk_ops) { + .get_rate = s3c2443_prediv_getrate, + }, +}; + +/* usbhost + * + * usb host bus-clock, usually 48MHz to provide USB bus clock timing +*/ + +static struct clksrc_clk clk_usb_bus_host = { + .clk = { + .name = "usb-bus-host-parent", + .id = -1, + .parent = &clk_esysclk.clk, + .ctrlbit = S3C2443_SCLKCON_USBHOST, + .enable = s3c2443_clkcon_enable_s, + }, + .reg_div = { .reg = S3C2443_CLKDIV1, .size = 2, .shift = 4 }, +}; + +/* common clksrc clocks */ + +static struct clksrc_clk clksrc_clks[] = { + { + /* ART baud-rate clock sourced from esysclk via a divisor */ + .clk = { + .name = "uartclk", + .id = -1, + .parent = &clk_esysclk.clk, + }, + .reg_div = { .reg = S3C2443_CLKDIV1, .size = 4, .shift = 8 }, + }, { + /* camera interface bus-clock, divided down from esysclk */ + .clk = { + .name = "camif-upll", /* same as 2440 name */ + .id = -1, + .parent = &clk_esysclk.clk, + .ctrlbit = S3C2443_SCLKCON_CAMCLK, + .enable = s3c2443_clkcon_enable_s, + }, + .reg_div = { .reg = S3C2443_CLKDIV1, .size = 4, .shift = 26 }, + }, { + .clk = { + .name = "display-if", + .id = -1, + .parent = &clk_esysclk.clk, + .ctrlbit = S3C2443_SCLKCON_DISPCLK, + .enable = s3c2443_clkcon_enable_s, + }, + .reg_div = { .reg = S3C2443_CLKDIV1, .size = 8, .shift = 16 }, + }, +}; + + +static struct clk init_clocks_off[] = { + { + .name = "adc", + .id = -1, + .parent = &clk_p, + .enable = s3c2443_clkcon_enable_p, + .ctrlbit = S3C2443_PCLKCON_ADC, + }, { + .name = "i2c", + .id = -1, + .parent = &clk_p, + .enable = s3c2443_clkcon_enable_p, + .ctrlbit = S3C2443_PCLKCON_IIC, + } +}; + +static struct clk init_clocks[] = { + { + .name = "dma", + .id = 0, + .parent = &clk_h, + .enable = s3c2443_clkcon_enable_h, + .ctrlbit = S3C2443_HCLKCON_DMA0, + }, { + .name = "dma", + .id = 1, + .parent = &clk_h, + .enable = s3c2443_clkcon_enable_h, + .ctrlbit = S3C2443_HCLKCON_DMA1, + }, { + .name = "dma", + .id = 2, + .parent = &clk_h, + .enable = s3c2443_clkcon_enable_h, + .ctrlbit = S3C2443_HCLKCON_DMA2, + }, { + .name = "dma", + .id = 3, + .parent = &clk_h, + .enable = s3c2443_clkcon_enable_h, + .ctrlbit = S3C2443_HCLKCON_DMA3, + }, { + .name = "dma", + .id = 4, + .parent = &clk_h, + .enable = s3c2443_clkcon_enable_h, + .ctrlbit = S3C2443_HCLKCON_DMA4, + }, { + .name = "dma", + .id = 5, + .parent = &clk_h, + .enable = s3c2443_clkcon_enable_h, + .ctrlbit = S3C2443_HCLKCON_DMA5, + }, { + .name = "hsmmc", + .id = 0, + .parent = &clk_h, + .enable = s3c2443_clkcon_enable_h, + .ctrlbit = S3C2443_HCLKCON_HSMMC, + }, { + .name = "gpio", + .id = -1, + .parent = &clk_p, + .enable = s3c2443_clkcon_enable_p, + .ctrlbit = S3C2443_PCLKCON_GPIO, + }, { + .name = "usb-host", + .id = -1, + .parent = &clk_h, + .enable = s3c2443_clkcon_enable_h, + .ctrlbit = S3C2443_HCLKCON_USBH, + }, { + .name = "usb-device", + .id = -1, + .parent = &clk_h, + .enable = s3c2443_clkcon_enable_h, + .ctrlbit = S3C2443_HCLKCON_USBD, + }, { + .name = "lcd", + .id = -1, + .parent = &clk_h, + .enable = s3c2443_clkcon_enable_h, + .ctrlbit = S3C2443_HCLKCON_LCDC, + + }, { + .name = "timers", + .id = -1, + .parent = &clk_p, + .enable = s3c2443_clkcon_enable_p, + .ctrlbit = S3C2443_PCLKCON_PWMT, + }, { + .name = "cfc", + .id = -1, + .parent = &clk_h, + .enable = s3c2443_clkcon_enable_h, + .ctrlbit = S3C2443_HCLKCON_CFC, + }, { + .name = "ssmc", + .id = -1, + .parent = &clk_h, + .enable = s3c2443_clkcon_enable_h, + .ctrlbit = S3C2443_HCLKCON_SSMC, + }, { + .name = "uart", + .id = 0, + .parent = &clk_p, + .enable = s3c2443_clkcon_enable_p, + .ctrlbit = S3C2443_PCLKCON_UART0, + }, { + .name = "uart", + .id = 1, + .parent = &clk_p, + .enable = s3c2443_clkcon_enable_p, + .ctrlbit = S3C2443_PCLKCON_UART1, + }, { + .name = "uart", + .id = 2, + .parent = &clk_p, + .enable = s3c2443_clkcon_enable_p, + .ctrlbit = S3C2443_PCLKCON_UART2, + }, { + .name = "uart", + .id = 3, + .parent = &clk_p, + .enable = s3c2443_clkcon_enable_p, + .ctrlbit = S3C2443_PCLKCON_UART3, + }, { + .name = "rtc", + .id = -1, + .parent = &clk_p, + .enable = s3c2443_clkcon_enable_p, + .ctrlbit = S3C2443_PCLKCON_RTC, + }, { + .name = "watchdog", + .id = -1, + .parent = &clk_p, + .ctrlbit = S3C2443_PCLKCON_WDT, + }, { + .name = "ac97", + .id = -1, + .parent = &clk_p, + .ctrlbit = S3C2443_PCLKCON_AC97, + }, { + .name = "nand", + .id = -1, + .parent = &clk_h, + }, { + .name = "usb-bus-host", + .id = -1, + .parent = &clk_usb_bus_host.clk, + } +}; + +static inline unsigned long s3c2443_get_hdiv(unsigned long clkcon0) +{ + clkcon0 &= S3C2443_CLKDIV0_HCLKDIV_MASK; + + return clkcon0 + 1; +} + +/* EPLLCON compatible enough to get on/off information */ + +void __init_or_cpufreq s3c2443_common_setup_clocks(pll_fn get_mpll, + fdiv_fn get_fdiv) +{ + unsigned long epllcon = __raw_readl(S3C2443_EPLLCON); + unsigned long mpllcon = __raw_readl(S3C2443_MPLLCON); + unsigned long clkdiv0 = __raw_readl(S3C2443_CLKDIV0); + struct clk *xtal_clk; + unsigned long xtal; + unsigned long pll; + unsigned long fclk; + unsigned long hclk; + unsigned long pclk; + int ptr; + + xtal_clk = clk_get(NULL, "xtal"); + xtal = clk_get_rate(xtal_clk); + clk_put(xtal_clk); + + pll = get_mpll(mpllcon, xtal); + clk_msysclk.clk.rate = pll; + + fclk = pll / get_fdiv(clkdiv0); + hclk = s3c2443_prediv_getrate(&clk_prediv); + hclk /= s3c2443_get_hdiv(clkdiv0); + pclk = hclk / ((clkdiv0 & S3C2443_CLKDIV0_HALF_PCLK) ? 2 : 1); + + s3c24xx_setup_clocks(fclk, hclk, pclk); + + printk("CPU: MPLL %s %ld.%03ld MHz, cpu %ld.%03ld MHz, mem %ld.%03ld MHz, pclk %ld.%03ld MHz\n", + (mpllcon & S3C2443_PLLCON_OFF) ? "off":"on", + print_mhz(pll), print_mhz(fclk), + print_mhz(hclk), print_mhz(pclk)); + + for (ptr = 0; ptr < ARRAY_SIZE(clksrc_clks); ptr++) + s3c_set_clksrc(&clksrc_clks[ptr], true); + + /* ensure usb bus clock is within correct rate of 48MHz */ + + if (clk_get_rate(&clk_usb_bus_host.clk) != (48 * 1000 * 1000)) { + printk(KERN_INFO "Warning: USB host bus not at 48MHz\n"); + clk_set_rate(&clk_usb_bus_host.clk, 48*1000*1000); + } + + printk("CPU: EPLL %s %ld.%03ld MHz, usb-bus %ld.%03ld MHz\n", + (epllcon & S3C2443_PLLCON_OFF) ? "off":"on", + print_mhz(clk_get_rate(&clk_epll)), + print_mhz(clk_get_rate(&clk_usb_bus))); +} + +static struct clk *clks[] __initdata = { + &clk_prediv, + &clk_mpllref, + &clk_mdivclk, + &clk_ext, + &clk_epll, + &clk_usb_bus, +}; + +static struct clksrc_clk *clksrcs[] __initdata = { + &clk_usb_bus_host, + &clk_epllref, + &clk_esysclk, + &clk_msysclk, +}; + +void __init s3c2443_common_init_clocks(int xtal, pll_fn get_mpll, + fdiv_fn get_fdiv) +{ + int ptr; + + /* s3c2443 parents h and p clocks from prediv */ + clk_h.parent = &clk_prediv; + clk_p.parent = &clk_prediv; + + clk_usb_bus.parent = &clk_usb_bus_host.clk; + clk_epll.parent = &clk_epllref.clk; + + s3c24xx_register_baseclocks(xtal); + s3c24xx_register_clocks(clks, ARRAY_SIZE(clks)); + + for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++) + s3c_register_clksrc(clksrcs[ptr], 1); + + s3c_register_clksrc(clksrc_clks, ARRAY_SIZE(clksrc_clks)); + s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks)); + + /* See s3c2443/etc notes on disabling clocks at init time */ + s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); + s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); + + s3c2443_common_setup_clocks(get_mpll, get_fdiv); +} -- cgit v1.2.3 From 8d6f8658305db969981f64a22296b487ef2f1148 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Fri, 30 Apr 2010 11:12:58 +0900 Subject: ARM: S3C2416: Add basic clock support Add basic clock support for the PLLs, HSMMC channels and PWM clocks. This is enough to get a basic system up and running. Signed-off-by: Ben Dooks --- arch/arm/mach-s3c2410/include/mach/regs-clock.h | 2 + arch/arm/mach-s3c2416/Kconfig | 2 + arch/arm/mach-s3c2416/Makefile | 2 +- arch/arm/mach-s3c2416/clock.c | 135 ++++++++++++++++++++++++ arch/arm/plat-s3c24xx/include/plat/pll.h | 25 +++++ 5 files changed, 165 insertions(+), 1 deletion(-) create mode 100644 arch/arm/mach-s3c2416/clock.c diff --git a/arch/arm/mach-s3c2410/include/mach/regs-clock.h b/arch/arm/mach-s3c2410/include/mach/regs-clock.h index 9a0d169be137..3415b60082d7 100644 --- a/arch/arm/mach-s3c2410/include/mach/regs-clock.h +++ b/arch/arm/mach-s3c2410/include/mach/regs-clock.h @@ -161,4 +161,6 @@ #endif /* CONFIG_CPU_S3C2412 | CONFIG_CPU_S3C2413 */ +#define S3C2416_CLKDIV2 S3C2410_CLKREG(0x28) + #endif /* __ASM_ARM_REGS_CLOCK */ diff --git a/arch/arm/mach-s3c2416/Kconfig b/arch/arm/mach-s3c2416/Kconfig index 528f27348b68..677f963ee49e 100644 --- a/arch/arm/mach-s3c2416/Kconfig +++ b/arch/arm/mach-s3c2416/Kconfig @@ -10,6 +10,8 @@ config CPU_S3C2416 select CPU_ARM926T select S3C2416_DMA if S3C2410_DMA select CPU_LLSERIAL_S3C2440 + select SAMSUNG_CLKSRC + select S3C2443_CLOCK help Support for the S3C2416 SoC from the S3C24XX line diff --git a/arch/arm/mach-s3c2416/Makefile b/arch/arm/mach-s3c2416/Makefile index 9183e81037ca..6c12c7bf40ad 100644 --- a/arch/arm/mach-s3c2416/Makefile +++ b/arch/arm/mach-s3c2416/Makefile @@ -9,7 +9,7 @@ obj-m := obj-n := obj- := -obj-$(CONFIG_CPU_S3C2416) += s3c2416.o +obj-$(CONFIG_CPU_S3C2416) += s3c2416.o clock.o obj-$(CONFIG_CPU_S3C2416) += irq.o #obj-$(CONFIG_S3C2416_DMA) += dma.o diff --git a/arch/arm/mach-s3c2416/clock.c b/arch/arm/mach-s3c2416/clock.c new file mode 100644 index 000000000000..7ccf5a2a2bfc --- /dev/null +++ b/arch/arm/mach-s3c2416/clock.c @@ -0,0 +1,135 @@ +/* linux/arch/arm/mach-s3c2416/clock.c + * + * Copyright (c) 2010 Simtec Electronics + * Copyright (c) 2010 Ben Dooks + * + * S3C2416 Clock control support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include +#include + +#include +#include +#include +#include +#include + +#include +#include +#include + +#include + +#include +#include + +static unsigned int armdiv[8] = { + [0] = 1, + [1] = 2, + [2] = 3, + [3] = 4, + [5] = 6, + [7] = 8, +}; + +/* ID to hardware numbering, 0 is HSMMC1, 1 is HSMMC0 */ +static struct clksrc_clk hsmmc_div[] = { + [0] = { + .clk = { + .name = "hsmmc-div", + .id = 1, + .parent = &clk_esysclk.clk, + }, + .reg_div = { .reg = S3C2416_CLKDIV2, .size = 2, .shift = 6 }, + }, + [1] = { + .clk = { + .name = "hsmmc-div", + .id = 0, + .parent = &clk_esysclk.clk, + }, + .reg_div = { .reg = S3C2443_CLKDIV1, .size = 2, .shift = 6 }, + }, +}; + +static struct clksrc_clk hsmmc_mux[] = { + [0] = { + .clk = { + .id = 1, + .name = "hsmmc-if", + .ctrlbit = (1 << 6), + .enable = s3c2443_clkcon_enable_s, + }, + .sources = &(struct clksrc_sources) { + .nr_sources = 2, + .sources = (struct clk *[]) { + [0] = &hsmmc_div[0].clk, + [1] = NULL, /* to fix */ + }, + }, + .reg_src = { .reg = S3C2443_CLKSRC, .size = 1, .shift = 16 }, + }, + [1] = { + .clk = { + .id = 0, + .name = "hsmmc-if", + .ctrlbit = (1 << 12), + .enable = s3c2443_clkcon_enable_s, + }, + .sources = &(struct clksrc_sources) { + .nr_sources = 2, + .sources = (struct clk *[]) { + [0] = &hsmmc_div[1].clk, + [1] = NULL, /* to fix */ + }, + }, + .reg_src = { .reg = S3C2443_CLKSRC, .size = 1, .shift = 17 }, + }, +}; + + +static inline unsigned int s3c2416_fclk_div(unsigned long clkcon0) +{ + clkcon0 &= 7 << S3C2443_CLKDIV0_ARMDIV_SHIFT; + + return armdiv[clkcon0 >> S3C2443_CLKDIV0_ARMDIV_SHIFT]; +} + +void __init_or_cpufreq s3c2416_setup_clocks(void) +{ + s3c2443_common_setup_clocks(s3c2416_get_pll, s3c2416_fclk_div); +} + + +static struct clksrc_clk *clksrcs[] __initdata = { + &hsmmc_div[0], + &hsmmc_div[1], + &hsmmc_mux[0], + &hsmmc_mux[1], +}; + +void __init s3c2416_init_clocks(int xtal) +{ + u32 epllcon = __raw_readl(S3C2443_EPLLCON); + u32 epllcon1 = __raw_readl(S3C2443_EPLLCON+4); + int ptr; + + /* s3c2416 EPLL compatible with s3c64xx */ + clk_epll.rate = s3c_get_pll6553x(xtal, epllcon, epllcon1); + + clk_epll.parent = &clk_epllref.clk; + + s3c2443_common_init_clocks(xtal, s3c2416_get_pll, s3c2416_fclk_div); + + for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++) + s3c_register_clksrc(clksrcs[ptr], 1); + + s3c_pwmclk_init(); + +} diff --git a/arch/arm/plat-s3c24xx/include/plat/pll.h b/arch/arm/plat-s3c24xx/include/plat/pll.h index 7ea8bffa7a9c..005729a1077a 100644 --- a/arch/arm/plat-s3c24xx/include/plat/pll.h +++ b/arch/arm/plat-s3c24xx/include/plat/pll.h @@ -35,3 +35,28 @@ s3c24xx_get_pll(unsigned int pllval, unsigned int baseclk) return (unsigned int)fvco; } + +#define S3C2416_PLL_M_SHIFT (14) +#define S3C2416_PLL_P_SHIFT (5) +#define S3C2416_PLL_S_MASK (7) +#define S3C2416_PLL_M_MASK ((1 << 10) - 1) +#define S3C2416_PLL_P_MASK (63) + +static inline unsigned int +s3c2416_get_pll(unsigned int pllval, unsigned int baseclk) +{ + unsigned int m, p, s; + uint64_t fvco; + + m = pllval >> S3C2416_PLL_M_SHIFT; + p = pllval >> S3C2416_PLL_P_SHIFT; + + s = pllval & S3C2416_PLL_S_MASK; + m &= S3C2416_PLL_M_MASK; + p &= S3C2416_PLL_P_MASK; + + fvco = (uint64_t)baseclk * m; + do_div(fvco, (p << s)); + + return (unsigned int)fvco; +} -- cgit v1.2.3 From c140c98ac161ad270a768126431e36a22f86f6b3 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Thu, 29 Apr 2010 18:59:43 +0900 Subject: ARM: S3C2416: Add support for second HSMMC channel Add support for the second HSMMC channel on the S3C2416. Signed-off-by: Ben Dooks --- arch/arm/mach-s3c2410/include/mach/irqs.h | 3 +++ arch/arm/mach-s3c2410/include/mach/map.h | 5 +++-- arch/arm/mach-s3c2416/Kconfig | 1 + arch/arm/mach-s3c2416/mach-smdk2416.c | 1 + 4 files changed, 8 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-s3c2410/include/mach/irqs.h b/arch/arm/mach-s3c2410/include/mach/irqs.h index c1b8ec07bf45..877c15e1b154 100644 --- a/arch/arm/mach-s3c2410/include/mach/irqs.h +++ b/arch/arm/mach-s3c2410/include/mach/irqs.h @@ -150,7 +150,10 @@ #define IRQ_S3C2443_HSMMC S3C2410_IRQ(20) /* IRQ_SDI */ #define IRQ_S3C2443_NAND S3C2410_IRQ(24) /* reserved */ +#define IRQ_S3C2416_HSMMC0 S3C2410_IRQ(21) /* S3C2416/S3C2450 */ + #define IRQ_HSMMC0 IRQ_S3C2443_HSMMC +#define IRQ_HSMMC1 IRQ_S3C2416_HSMMC0 #define IRQ_S3C2443_LCD1 S3C2410_IRQSUB(14) #define IRQ_S3C2443_LCD2 S3C2410_IRQSUB(15) diff --git a/arch/arm/mach-s3c2410/include/mach/map.h b/arch/arm/mach-s3c2410/include/mach/map.h index b049e61460b6..f07d68066d7e 100644 --- a/arch/arm/mach-s3c2410/include/mach/map.h +++ b/arch/arm/mach-s3c2410/include/mach/map.h @@ -63,9 +63,9 @@ #define S3C2440_PA_AC97 (0x5B000000) #define S3C2440_SZ_AC97 SZ_1M -/* S3C2443 High-speed SD/MMC */ +/* S3C2443/S3C2416 High-speed SD/MMC */ #define S3C2443_PA_HSMMC (0x4A800000) -#define S3C2443_SZ_HSMMC (256) +#define S3C2416_PA_HSMMC0 (0x4AC00000) /* S3C2412 memory and IO controls */ #define S3C2412_PA_SSMC (0x4F000000) @@ -110,6 +110,7 @@ #define S3C_PA_UART S3C24XX_PA_UART #define S3C_PA_USBHOST S3C2410_PA_USBHOST #define S3C_PA_HSMMC0 S3C2443_PA_HSMMC +#define S3C_PA_HSMMC1 S3C2416_PA_HSMMC0 #define S3C_PA_NAND S3C24XX_PA_NAND #endif /* __ASM_ARCH_MAP_H */ diff --git a/arch/arm/mach-s3c2416/Kconfig b/arch/arm/mach-s3c2416/Kconfig index 677f963ee49e..a1308d45b94f 100644 --- a/arch/arm/mach-s3c2416/Kconfig +++ b/arch/arm/mach-s3c2416/Kconfig @@ -27,6 +27,7 @@ config MACH_SMDK2416 bool "SMDK2416" select CPU_S3C2416 select S3C_DEV_HSMMC + select S3C_DEV_HSMMC1 help Say Y here if you are using an SMDK2416 diff --git a/arch/arm/mach-s3c2416/mach-smdk2416.c b/arch/arm/mach-s3c2416/mach-smdk2416.c index 8c9aed69d415..a51973c7334c 100644 --- a/arch/arm/mach-s3c2416/mach-smdk2416.c +++ b/arch/arm/mach-s3c2416/mach-smdk2416.c @@ -112,6 +112,7 @@ static struct platform_device *smdk2416_devices[] __initdata = { &s3c_device_wdt, &s3c_device_i2c0, &s3c_device_hsmmc0, + &s3c_device_hsmmc1, }; static void __init smdk2416_map_io(void) -- cgit v1.2.3 From a6e1ec7f69950864ff8d992da6d929b1444f7cb3 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Fri, 30 Apr 2010 10:59:42 +0900 Subject: ARM: S3C2416: Add support for OHCI on SMDK2416 Add device definition and ensure that the host port is powered up at start time. Full power control can be added at a later date. Signed-off-by: Ben Dooks --- arch/arm/mach-s3c2416/mach-smdk2416.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/arch/arm/mach-s3c2416/mach-smdk2416.c b/arch/arm/mach-s3c2416/mach-smdk2416.c index a51973c7334c..99d24c44f30f 100644 --- a/arch/arm/mach-s3c2416/mach-smdk2416.c +++ b/arch/arm/mach-s3c2416/mach-smdk2416.c @@ -21,6 +21,7 @@ #include #include #include +#include #include #include @@ -110,6 +111,7 @@ static struct s3c2410_uartcfg smdk2416_uartcfgs[] __initdata = { static struct platform_device *smdk2416_devices[] __initdata = { &s3c_device_wdt, + &s3c_device_ohci, &s3c_device_i2c0, &s3c_device_hsmmc0, &s3c_device_hsmmc1, @@ -128,6 +130,9 @@ static void __init smdk2416_machine_init(void) { s3c_i2c0_set_platdata(NULL); + gpio_request(S3C2410_GPB(4), "USBHost Power"); + gpio_direction_output(S3C2410_GPB(4), 1); + platform_add_devices(smdk2416_devices, ARRAY_SIZE(smdk2416_devices)); smdk_machine_init(); } -- cgit v1.2.3 From e12ef7f02ed56af4f84a5743fa268901c52729bf Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Mon, 3 May 2010 16:44:35 +0900 Subject: ARM: S3C2416: Use s3c2440 style i2c controller The s3c2416 i2c controllers are compatible with the s3c2440 style i2c block, so change the device name appropriately. Signed-off-by: Ben Dooks y --- arch/arm/mach-s3c2416/s3c2416.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/arch/arm/mach-s3c2416/s3c2416.c b/arch/arm/mach-s3c2416/s3c2416.c index 6165dc7010fe..ad5a63a40d6e 100644 --- a/arch/arm/mach-s3c2416/s3c2416.c +++ b/arch/arm/mach-s3c2416/s3c2416.c @@ -50,6 +50,8 @@ #include #include +#include + static struct map_desc s3c2416_iodesc[] __initdata = { IODESC_ENT(WATCHDOG), IODESC_ENT(CLKPWR), @@ -80,6 +82,10 @@ int __init s3c2416_init(void) s3c_device_wdt.resource[1].start = IRQ_S3C2443_WDT; s3c_device_wdt.resource[1].end = IRQ_S3C2443_WDT; + /* the i2c devices are directly compatible with s3c2440 */ + s3c_i2c0_setname("s3c2440-i2c"); + s3c_i2c1_setname("s3c2440-i2c"); + return sysdev_register(&s3c2416_sysdev); } -- cgit v1.2.3 From eb90de4a2d2880f0037d2b2ba85a3e857a898b40 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Fri, 30 Apr 2010 19:48:02 +0900 Subject: ARM: S3C2413: Update GPIO pull-up support Ensure the right get/set pull code is selected and assigned to the GPIO core. Signed-off-by: Ben Dooks --- arch/arm/mach-s3c2416/Kconfig | 1 + arch/arm/mach-s3c2416/s3c2416.c | 7 +++++++ 2 files changed, 8 insertions(+) diff --git a/arch/arm/mach-s3c2416/Kconfig b/arch/arm/mach-s3c2416/Kconfig index a1308d45b94f..6d077b24d190 100644 --- a/arch/arm/mach-s3c2416/Kconfig +++ b/arch/arm/mach-s3c2416/Kconfig @@ -10,6 +10,7 @@ config CPU_S3C2416 select CPU_ARM926T select S3C2416_DMA if S3C2410_DMA select CPU_LLSERIAL_S3C2440 + select S3C_GPIO_PULL_UPDOWN select SAMSUNG_CLKSRC select S3C2443_CLOCK help diff --git a/arch/arm/mach-s3c2416/s3c2416.c b/arch/arm/mach-s3c2416/s3c2416.c index ad5a63a40d6e..3bff05745d0b 100644 --- a/arch/arm/mach-s3c2416/s3c2416.c +++ b/arch/arm/mach-s3c2416/s3c2416.c @@ -28,6 +28,7 @@ #include #include #include +#include #include #include #include @@ -46,6 +47,9 @@ #include #include +#include +#include +#include #include #include #include @@ -104,6 +108,9 @@ void __init s3c2416_init_uarts(struct s3c2410_uartcfg *cfg, int no) void __init s3c2416_map_io(void) { + s3c24xx_gpiocfg_default.set_pull = s3c_gpio_setpull_updown; + s3c24xx_gpiocfg_default.get_pull = s3c_gpio_getpull_updown; + iotable_init(s3c2416_iodesc, ARRAY_SIZE(s3c2416_iodesc)); } -- cgit v1.2.3 From 63b1f51b2405573d47bf5b9ab6e7cd5c697d3dcc Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Fri, 30 Apr 2010 16:32:26 +0900 Subject: ARM: SAMSUNG: Update S3C2416 entry with S3C2450 These devices are so similar that they share the same SoC ID code, so note this. Signed-off-by: Ben Dooks --- arch/arm/Kconfig | 6 +++++- arch/arm/mach-s3c2416/Kconfig | 3 +++ arch/arm/plat-s3c24xx/cpu.c | 2 +- 3 files changed, 9 insertions(+), 2 deletions(-) diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 6785c33908bf..3f8718fc4050 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -647,7 +647,7 @@ config ARCH_SA1100 Support for StrongARM 11x0 based boards. config ARCH_S3C2410 - bool "Samsung S3C2410, S3C2412, S3C2413, S3C2416, S3C2440, S3C2442, S3C2443" + bool "Samsung S3C2410, S3C2412, S3C2413, S3C2416, S3C2440, S3C2442, S3C2443, S3C2450" select GENERIC_GPIO select ARCH_HAS_CPUFREQ select HAVE_CLK @@ -656,6 +656,10 @@ config ARCH_S3C2410 BAST (), the IPAQ 1940 or the Samsung SMDK2410 development board (and derivatives). + Note, the S3C2416 and the S3C2450 are so close that they even share + the same SoC ID code. This means that there is no seperate machine + directory (no arch/arm/mach-s3c2450) as the S3C2416 was first. + config ARCH_S3C64XX bool "Samsung S3C64XX" select PLAT_SAMSUNG diff --git a/arch/arm/mach-s3c2416/Kconfig b/arch/arm/mach-s3c2416/Kconfig index 6d077b24d190..29103a6047de 100644 --- a/arch/arm/mach-s3c2416/Kconfig +++ b/arch/arm/mach-s3c2416/Kconfig @@ -4,6 +4,9 @@ # # Licensed under GPLv2 +# note, this also supports the S3C2450 which is so similar it has the same +# ID code as the S3C2416. + config CPU_S3C2416 bool depends on ARCH_S3C2410 diff --git a/arch/arm/plat-s3c24xx/cpu.c b/arch/arm/plat-s3c24xx/cpu.c index 32db85651af0..76d0858c3cbb 100644 --- a/arch/arm/plat-s3c24xx/cpu.c +++ b/arch/arm/plat-s3c24xx/cpu.c @@ -58,7 +58,7 @@ static const char name_s3c2400[] = "S3C2400"; static const char name_s3c2410[] = "S3C2410"; static const char name_s3c2412[] = "S3C2412"; -static const char name_s3c2416[] = "S3C2416"; +static const char name_s3c2416[] = "S3C2416/S3C2450"; static const char name_s3c2440[] = "S3C2440"; static const char name_s3c2442[] = "S3C2442"; static const char name_s3c2442b[] = "S3C2442B"; -- cgit v1.2.3 From fbd6fe73514cf31a07c7b16518930ea84c644463 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Fri, 30 Apr 2010 19:08:38 +0900 Subject: ARM: S3C2443: Add initial defines for framebuffer support Add the necessary defines to get the s3c-fb device to compile for s3c2443. Signed-off-by: Ben Dooks --- arch/arm/mach-s3c2410/include/mach/irqs.h | 3 +++ arch/arm/mach-s3c2410/include/mach/map.h | 3 +++ 2 files changed, 6 insertions(+) diff --git a/arch/arm/mach-s3c2410/include/mach/irqs.h b/arch/arm/mach-s3c2410/include/mach/irqs.h index 877c15e1b154..11bb0f08fe6a 100644 --- a/arch/arm/mach-s3c2410/include/mach/irqs.h +++ b/arch/arm/mach-s3c2410/include/mach/irqs.h @@ -187,6 +187,9 @@ #define IRQ_S3CUART_TX3 IRQ_S3C2443_TX3 #define IRQ_S3CUART_ERR3 IRQ_S3C2443_ERR3 +#define IRQ_LCD_VSYNC IRQ_S3C2443_LCD3 +#define IRQ_LCD_SYSTEM IRQ_S3C2443_LCD2 + #ifdef CONFIG_CPU_S3C2440 #define IRQ_S3C244x_AC97 IRQ_S3C2440_AC97 #else diff --git a/arch/arm/mach-s3c2410/include/mach/map.h b/arch/arm/mach-s3c2410/include/mach/map.h index f07d68066d7e..091c98a639d9 100644 --- a/arch/arm/mach-s3c2410/include/mach/map.h +++ b/arch/arm/mach-s3c2410/include/mach/map.h @@ -67,6 +67,8 @@ #define S3C2443_PA_HSMMC (0x4A800000) #define S3C2416_PA_HSMMC0 (0x4AC00000) +#define S3C2443_PA_FB (0x4C800000) + /* S3C2412 memory and IO controls */ #define S3C2412_PA_SSMC (0x4F000000) #define S3C2412_VA_SSMC S3C_ADDR_CPU(0x00000000) @@ -106,6 +108,7 @@ #define S3C24XX_PA_SDI S3C2410_PA_SDI #define S3C24XX_PA_NAND S3C2410_PA_NAND +#define S3C_PA_FB S3C2443_PA_FB #define S3C_PA_IIC S3C2410_PA_IIC #define S3C_PA_UART S3C24XX_PA_UART #define S3C_PA_USBHOST S3C2410_PA_USBHOST -- cgit v1.2.3 From dc5d2e8236e2eec461e8c34d302635142e93ab49 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Fri, 30 Apr 2010 19:34:25 +0900 Subject: ARM: S3C2443: Fix definition of LCD clock bit Fix the definition of the LCD clock bit, it is the TFT display controller on bit 9, not the older STN on bit 10. Signed-off-by: Ben Dooks --- arch/arm/mach-s3c2410/include/mach/regs-s3c2443-clock.h | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/arch/arm/mach-s3c2410/include/mach/regs-s3c2443-clock.h b/arch/arm/mach-s3c2410/include/mach/regs-s3c2443-clock.h index d87ebe0cb625..08ab9dfb6ae6 100644 --- a/arch/arm/mach-s3c2410/include/mach/regs-s3c2443-clock.h +++ b/arch/arm/mach-s3c2410/include/mach/regs-s3c2443-clock.h @@ -83,8 +83,7 @@ #define S3C2443_HCLKCON_DMA4 (1<<4) #define S3C2443_HCLKCON_DMA5 (1<<5) #define S3C2443_HCLKCON_CAMIF (1<<8) -#define S3C2443_HCLKCON_DISP (1<<9) -#define S3C2443_HCLKCON_LCDC (1<<10) +#define S3C2443_HCLKCON_LCDC (1<<9) #define S3C2443_HCLKCON_USBH (1<<11) #define S3C2443_HCLKCON_USBD (1<<12) #define S3C2443_HCLKCON_HSMMC (1<<16) -- cgit v1.2.3 From f077f3fc055b329787783a1ab0efb9a8f8ecc874 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Thu, 13 May 2010 14:44:50 +0900 Subject: ARM: SAMSUNG: Set S3C_FB_MAX_WIN in Move the S3C_FB_MAX_WIN to the platform data to avoid having to include the registers with the platform data. Set S3C_FB_MAX_WIN to 5, which is the maximum that any of the current hardware can do and the cost of having it set to this for all is minimal (at least for the platform data case), then always leave this as the maximum for the systems supported. Also remove the inclusion of from the device definition in arch/arm/plat-samsung Signed-off-by: Ben Dooks --- arch/arm/plat-samsung/dev-fb.c | 1 - arch/arm/plat-samsung/include/plat/fb.h | 7 +++++++ 2 files changed, 7 insertions(+), 1 deletion(-) diff --git a/arch/arm/plat-samsung/dev-fb.c b/arch/arm/plat-samsung/dev-fb.c index 002a15f313f3..bf60204c6297 100644 --- a/arch/arm/plat-samsung/dev-fb.c +++ b/arch/arm/plat-samsung/dev-fb.c @@ -19,7 +19,6 @@ #include #include -#include #include #include diff --git a/arch/arm/plat-samsung/include/plat/fb.h b/arch/arm/plat-samsung/include/plat/fb.h index ffc01a76b7ce..1f85649d8c18 100644 --- a/arch/arm/plat-samsung/include/plat/fb.h +++ b/arch/arm/plat-samsung/include/plat/fb.h @@ -15,6 +15,13 @@ #ifndef __PLAT_S3C_FB_H #define __PLAT_S3C_FB_H __FILE__ +/* S3C_FB_MAX_WIN + * Set to the maximum number of windows that any of the supported hardware + * can use. Since the platform data uses this for an array size, having it + * set to the maximum of any version of the hardware can do is safe. + */ +#define S3C_FB_MAX_WIN (5) + /** * struct s3c_fb_pd_win - per window setup data * @win_mode: The display parameters to initialise (not for window 0) -- cgit v1.2.3 From f64bea4318a73e833d0a9b8400cc0f6cee957da3 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Mon, 3 May 2010 15:29:44 +0900 Subject: ARM: SMDK2416: Add support for framebuffer device and ensure correct setup Add support for the LCD display on the SMDJK2416, and correctly name the framebuffer device. Signed-off-by: Ben Dooks --- arch/arm/mach-s3c2416/Kconfig | 1 + arch/arm/mach-s3c2416/mach-smdk2416.c | 62 +++++++++++++++++++++++++++++++++-- arch/arm/mach-s3c2416/s3c2416.c | 2 ++ 3 files changed, 62 insertions(+), 3 deletions(-) diff --git a/arch/arm/mach-s3c2416/Kconfig b/arch/arm/mach-s3c2416/Kconfig index 29103a6047de..657e4fe17f39 100644 --- a/arch/arm/mach-s3c2416/Kconfig +++ b/arch/arm/mach-s3c2416/Kconfig @@ -30,6 +30,7 @@ menu "S3C2416 Machines" config MACH_SMDK2416 bool "SMDK2416" select CPU_S3C2416 + select S3C_DEV_FB select S3C_DEV_HSMMC select S3C_DEV_HSMMC1 help diff --git a/arch/arm/mach-s3c2416/mach-smdk2416.c b/arch/arm/mach-s3c2416/mach-smdk2416.c index 99d24c44f30f..5fc3f67ef265 100644 --- a/arch/arm/mach-s3c2416/mach-smdk2416.c +++ b/arch/arm/mach-s3c2416/mach-smdk2416.c @@ -22,6 +22,7 @@ #include #include #include +#include #include #include @@ -36,16 +37,19 @@ #include #include -#include #include #include #include +#include #include #include #include #include +#include +#include + #include static struct map_desc smdk2416_iodesc[] __initdata = { @@ -109,7 +113,54 @@ static struct s3c2410_uartcfg smdk2416_uartcfgs[] __initdata = { } }; +struct s3c_fb_pd_win smdk2416_fb_win[] = { + [0] = { + /* think this is the same as the smdk6410 */ + .win_mode = { + .pixclock = 41094, + .left_margin = 8, + .right_margin = 13, + .upper_margin = 7, + .lower_margin = 5, + .hsync_len = 3, + .vsync_len = 1, + .xres = 800, + .yres = 480, + }, + .default_bpp = 16, + .max_bpp = 32, + }, +}; + +static void s3c2416_fb_gpio_setup_24bpp(void) +{ + unsigned int gpio; + + for (gpio = S3C2410_GPC(1); gpio <= S3C2410_GPC(4); gpio++) { + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); + s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); + } + + for (gpio = S3C2410_GPC(8); gpio <= S3C2410_GPC(15); gpio++) { + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); + s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); + } + + for (gpio = S3C2410_GPD(0); gpio <= S3C2410_GPD(15); gpio++) { + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); + s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); + } +} + +static struct s3c_fb_platdata smdk2416_fb_platdata = { + .win[0] = &smdk2416_fb_win[0], + .setup_gpio = s3c2416_fb_gpio_setup_24bpp, + .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB, + .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC, +}; + static struct platform_device *smdk2416_devices[] __initdata = { + &s3c_device_fb, &s3c_device_wdt, &s3c_device_ohci, &s3c_device_i2c0, @@ -119,20 +170,25 @@ static struct platform_device *smdk2416_devices[] __initdata = { static void __init smdk2416_map_io(void) { - s3c24xx_init_io(smdk2416_iodesc, ARRAY_SIZE(smdk2416_iodesc)); s3c24xx_init_clocks(12000000); s3c24xx_init_uarts(smdk2416_uartcfgs, ARRAY_SIZE(smdk2416_uartcfgs)); - } static void __init smdk2416_machine_init(void) { s3c_i2c0_set_platdata(NULL); + s3c_fb_set_platdata(&smdk2416_fb_platdata); gpio_request(S3C2410_GPB(4), "USBHost Power"); gpio_direction_output(S3C2410_GPB(4), 1); + gpio_request(S3C2410_GPB(3), "Display Power"); + gpio_direction_output(S3C2410_GPB(3), 1); + + gpio_request(S3C2410_GPB(1), "Display Reset"); + gpio_direction_output(S3C2410_GPB(1), 1); + platform_add_devices(smdk2416_devices, ARRAY_SIZE(smdk2416_devices)); smdk_machine_init(); } diff --git a/arch/arm/mach-s3c2416/s3c2416.c b/arch/arm/mach-s3c2416/s3c2416.c index 3bff05745d0b..35dabccd0ac2 100644 --- a/arch/arm/mach-s3c2416/s3c2416.c +++ b/arch/arm/mach-s3c2416/s3c2416.c @@ -90,6 +90,8 @@ int __init s3c2416_init(void) s3c_i2c0_setname("s3c2440-i2c"); s3c_i2c1_setname("s3c2440-i2c"); + s3c_device_fb.name = "s3c2443-fb"; + return sysdev_register(&s3c2416_sysdev); } -- cgit v1.2.3