From d01f87c0ffa96cb44faa78710711eb6e974b891c Mon Sep 17 00:00:00 2001 From: Sarah Sharp Date: Thu, 4 Oct 2012 09:53:43 -0700 Subject: USB: Enable LPM after a failed probe. Before a driver is probed, we want to disable USB 3.0 Link Power Management (LPM), in case the driver needs hub-initiated LPM disabled. After the probe finishes, we want to attempt to re-enable LPM, order to balance the LPM ref count. When a probe fails (such as when libusual doesn't want to bind to a USB 3.0 mass storage device), make sure to balance the LPM ref counts by re-enabling LPM. This patch should be backported to kernels as old as 3.5, that contain the commit 8306095fd2c1100e8244c09bf560f97aca5a311d "USB: Disable USB 3.0 LPM in critical sections." Signed-off-by: Sarah Sharp Cc: stable@vger.kernel.org --- drivers/usb/core/driver.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c index ddd820d25288..6056db7af410 100644 --- a/drivers/usb/core/driver.c +++ b/drivers/usb/core/driver.c @@ -367,6 +367,10 @@ static int usb_probe_interface(struct device *dev) intf->condition = USB_INTERFACE_UNBOUND; usb_cancel_queued_reset(intf); + /* If the LPM disable succeeded, balance the ref counts. */ + if (!lpm_disable_error) + usb_unlocked_enable_lpm(udev); + /* Unbound interfaces are always runtime-PM-disabled and -suspended */ if (driver->supports_autosuspend) pm_runtime_disable(dev); -- cgit v1.2.3 From ae8963adb4ad8c5f2a89ca1d99fb7bb721e7599f Mon Sep 17 00:00:00 2001 From: Sarah Sharp Date: Wed, 3 Oct 2012 11:18:05 -0700 Subject: usb: Don't enable LPM if the exit latency is zero. Some USB 3.0 devices signal that they don't implement Link PM by having all zeroes in the U1/U2 exit latencies in their SuperSpeed BOS descriptor. Don found that a Western Digital device he has experiences transfer errors when LPM is enabled. The lsusb shows the U1/U2 exit latencies are set to zero: Binary Object Store Descriptor: bLength 5 bDescriptorType 15 wTotalLength 22 bNumDeviceCaps 2 SuperSpeed USB Device Capability: bLength 10 bDescriptorType 16 bDevCapabilityType 3 bmAttributes 0x00 Latency Tolerance Messages (LTM) Supported wSpeedsSupported 0x000e Device can operate at Full Speed (12Mbps) Device can operate at High Speed (480Mbps) Device can operate at SuperSpeed (5Gbps) bFunctionalitySupport 1 Lowest fully-functional device speed is Full Speed (12Mbps) bU1DevExitLat 0 micro seconds bU2DevExitLat 0 micro seconds The fix is to not enable LPM for a particular link state if we find its corresponding exit latency is zero. This patch should be backported to kernels as old as 3.5, that contain the commit 1ea7e0e8e3d0f50901d335ea4178ab2aa8c88201 "USB: Add support to enable/disable USB3 link states." Signed-off-by: Sarah Sharp Reported-by: Don Zickus Tested-by: Don Zickus Cc: stable@vger.kernel.org --- drivers/usb/core/hub.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 673ee4696262..8f0478709323 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -3415,6 +3415,16 @@ static void usb_enable_link_state(struct usb_hcd *hcd, struct usb_device *udev, enum usb3_link_state state) { int timeout; + __u8 u1_mel = udev->bos->ss_cap->bU1devExitLat; + __le16 u2_mel = udev->bos->ss_cap->bU2DevExitLat; + + /* If the device says it doesn't have *any* exit latency to come out of + * U1 or U2, it's probably lying. Assume it doesn't implement that link + * state. + */ + if ((state == USB3_LPM_U1 && u1_mel == 0) || + (state == USB3_LPM_U2 && u2_mel == 0)) + return; /* We allow the host controller to set the U1/U2 timeout internally * first, so that it can change its schedule to account for the -- cgit v1.2.3 From 65a95b75bc5afa7bbb844e222481044c1c4767eb Mon Sep 17 00:00:00 2001 From: Sarah Sharp Date: Fri, 5 Oct 2012 10:32:07 -0700 Subject: usb: Send Set SEL before enabling parent U1/U2 timeout. The Set SEL control transfer tells a device the exit latencies associated with a device-initated U1 or U2 exit. Since a parent hub may initiate a transition to U1 soon after a downstream port's U1 timeout is set, we need to make sure the device receives the Set SEL transfer before the parent hub timeout is set. This patch should be backported to kernels as old as 3.5, that contain the commit 1ea7e0e8e3d0f50901d335ea4178ab2aa8c88201 "USB: Add support to enable/disable USB3 link states." Signed-off-by: Sarah Sharp Cc: stable@vger.kernel.org --- drivers/usb/core/hub.c | 23 ++++++++++++----------- 1 file changed, 12 insertions(+), 11 deletions(-) diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 8f0478709323..b8e11fff17be 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -3319,16 +3319,6 @@ static int usb_set_device_initiated_lpm(struct usb_device *udev, } if (enable) { - /* - * First, let the device know about the exit latencies - * associated with the link state we're about to enable. - */ - ret = usb_req_set_sel(udev, state); - if (ret < 0) { - dev_warn(&udev->dev, "Set SEL for device-initiated " - "%s failed.\n", usb3_lpm_names[state]); - return -EBUSY; - } /* * Now send the control transfer to enable device-initiated LPM * for either U1 or U2. @@ -3414,7 +3404,7 @@ static int usb_set_lpm_timeout(struct usb_device *udev, static void usb_enable_link_state(struct usb_hcd *hcd, struct usb_device *udev, enum usb3_link_state state) { - int timeout; + int timeout, ret; __u8 u1_mel = udev->bos->ss_cap->bU1devExitLat; __le16 u2_mel = udev->bos->ss_cap->bU2DevExitLat; @@ -3426,6 +3416,17 @@ static void usb_enable_link_state(struct usb_hcd *hcd, struct usb_device *udev, (state == USB3_LPM_U2 && u2_mel == 0)) return; + /* + * First, let the device know about the exit latencies + * associated with the link state we're about to enable. + */ + ret = usb_req_set_sel(udev, state); + if (ret < 0) { + dev_warn(&udev->dev, "Set SEL for device-initiated %s failed.\n", + usb3_lpm_names[state]); + return; + } + /* We allow the host controller to set the U1/U2 timeout internally * first, so that it can change its schedule to account for the * additional latency to send data to a device in a lower power -- cgit v1.2.3 From 1510a1a2d0946b34422fe8816187f274a5086904 Mon Sep 17 00:00:00 2001 From: Sarah Sharp Date: Fri, 5 Oct 2012 10:30:35 -0700 Subject: usb: trival: Fix debugging units mistake. SEL and PEL are in microseconds, not milliseconds. Also, fix a split string that will trigger checkpatch warnings. Signed-off-by: Sarah Sharp --- drivers/usb/core/hub.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index b8e11fff17be..64854d76f529 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -3241,8 +3241,7 @@ static int usb_req_set_sel(struct usb_device *udev, enum usb3_link_state state) (state == USB3_LPM_U2 && (u2_sel > USB3_LPM_MAX_U2_SEL_PEL || u2_pel > USB3_LPM_MAX_U2_SEL_PEL))) { - dev_dbg(&udev->dev, "Device-initiated %s disabled due " - "to long SEL %llu ms or PEL %llu ms\n", + dev_dbg(&udev->dev, "Device-initiated %s disabled due to long SEL %llu us or PEL %llu us\n", usb3_lpm_names[state], u1_sel, u1_pel); return -EINVAL; } -- cgit v1.2.3 From 5e1ddb481776a487b15b40579a000b279ce527c9 Mon Sep 17 00:00:00 2001 From: David Howells Date: Tue, 9 Oct 2012 09:49:07 +0100 Subject: UAPI: (Scripted) Disintegrate include/linux/usb Signed-off-by: David Howells Acked-by: Arnd Bergmann Acked-by: Thomas Gleixner Acked-by: Michael Kerrisk Acked-by: Paul E. McKenney Acked-by: Dave Jones --- include/linux/usb/Kbuild | 10 - include/linux/usb/audio.h | 524 +------------------ include/linux/usb/cdc.h | 412 --------------- include/linux/usb/ch11.h | 266 ---------- include/linux/usb/ch9.h | 960 +--------------------------------- include/linux/usb/functionfs.h | 167 +----- include/linux/usb/g_printer.h | 35 -- include/linux/usb/gadgetfs.h | 88 ---- include/linux/usb/midi.h | 112 ---- include/linux/usb/tmc.h | 43 -- include/linux/usb/video.h | 568 --------------------- include/uapi/linux/usb/Kbuild | 10 + include/uapi/linux/usb/audio.h | 545 ++++++++++++++++++++ include/uapi/linux/usb/cdc.h | 412 +++++++++++++++ include/uapi/linux/usb/ch11.h | 266 ++++++++++ include/uapi/linux/usb/ch9.h | 993 ++++++++++++++++++++++++++++++++++++ include/uapi/linux/usb/functionfs.h | 169 ++++++ include/uapi/linux/usb/g_printer.h | 35 ++ include/uapi/linux/usb/gadgetfs.h | 88 ++++ include/uapi/linux/usb/midi.h | 112 ++++ include/uapi/linux/usb/tmc.h | 43 ++ include/uapi/linux/usb/video.h | 568 +++++++++++++++++++++ 22 files changed, 3244 insertions(+), 3182 deletions(-) delete mode 100644 include/linux/usb/cdc.h delete mode 100644 include/linux/usb/ch11.h delete mode 100644 include/linux/usb/g_printer.h delete mode 100644 include/linux/usb/gadgetfs.h delete mode 100644 include/linux/usb/midi.h delete mode 100644 include/linux/usb/tmc.h delete mode 100644 include/linux/usb/video.h create mode 100644 include/uapi/linux/usb/audio.h create mode 100644 include/uapi/linux/usb/cdc.h create mode 100644 include/uapi/linux/usb/ch11.h create mode 100644 include/uapi/linux/usb/ch9.h create mode 100644 include/uapi/linux/usb/functionfs.h create mode 100644 include/uapi/linux/usb/g_printer.h create mode 100644 include/uapi/linux/usb/gadgetfs.h create mode 100644 include/uapi/linux/usb/midi.h create mode 100644 include/uapi/linux/usb/tmc.h create mode 100644 include/uapi/linux/usb/video.h diff --git a/include/linux/usb/Kbuild b/include/linux/usb/Kbuild index b607f3532e88..e69de29bb2d1 100644 --- a/include/linux/usb/Kbuild +++ b/include/linux/usb/Kbuild @@ -1,10 +0,0 @@ -header-y += audio.h -header-y += cdc.h -header-y += ch9.h -header-y += ch11.h -header-y += functionfs.h -header-y += gadgetfs.h -header-y += midi.h -header-y += g_printer.h -header-y += tmc.h -header-y += video.h diff --git a/include/linux/usb/audio.h b/include/linux/usb/audio.h index a54b8255d75f..3d84619110a4 100644 --- a/include/linux/usb/audio.h +++ b/include/linux/usb/audio.h @@ -17,531 +17,11 @@ * Types and defines in this file are either specific to version 1.0 of * this standard or common for newer versions. */ - #ifndef __LINUX_USB_AUDIO_H #define __LINUX_USB_AUDIO_H -#include - -/* bInterfaceProtocol values to denote the version of the standard used */ -#define UAC_VERSION_1 0x00 -#define UAC_VERSION_2 0x20 - -/* A.2 Audio Interface Subclass Codes */ -#define USB_SUBCLASS_AUDIOCONTROL 0x01 -#define USB_SUBCLASS_AUDIOSTREAMING 0x02 -#define USB_SUBCLASS_MIDISTREAMING 0x03 - -/* A.5 Audio Class-Specific AC Interface Descriptor Subtypes */ -#define UAC_HEADER 0x01 -#define UAC_INPUT_TERMINAL 0x02 -#define UAC_OUTPUT_TERMINAL 0x03 -#define UAC_MIXER_UNIT 0x04 -#define UAC_SELECTOR_UNIT 0x05 -#define UAC_FEATURE_UNIT 0x06 -#define UAC1_PROCESSING_UNIT 0x07 -#define UAC1_EXTENSION_UNIT 0x08 - -/* A.6 Audio Class-Specific AS Interface Descriptor Subtypes */ -#define UAC_AS_GENERAL 0x01 -#define UAC_FORMAT_TYPE 0x02 -#define UAC_FORMAT_SPECIFIC 0x03 - -/* A.7 Processing Unit Process Types */ -#define UAC_PROCESS_UNDEFINED 0x00 -#define UAC_PROCESS_UP_DOWNMIX 0x01 -#define UAC_PROCESS_DOLBY_PROLOGIC 0x02 -#define UAC_PROCESS_STEREO_EXTENDER 0x03 -#define UAC_PROCESS_REVERB 0x04 -#define UAC_PROCESS_CHORUS 0x05 -#define UAC_PROCESS_DYN_RANGE_COMP 0x06 - -/* A.8 Audio Class-Specific Endpoint Descriptor Subtypes */ -#define UAC_EP_GENERAL 0x01 - -/* A.9 Audio Class-Specific Request Codes */ -#define UAC_SET_ 0x00 -#define UAC_GET_ 0x80 - -#define UAC__CUR 0x1 -#define UAC__MIN 0x2 -#define UAC__MAX 0x3 -#define UAC__RES 0x4 -#define UAC__MEM 0x5 - -#define UAC_SET_CUR (UAC_SET_ | UAC__CUR) -#define UAC_GET_CUR (UAC_GET_ | UAC__CUR) -#define UAC_SET_MIN (UAC_SET_ | UAC__MIN) -#define UAC_GET_MIN (UAC_GET_ | UAC__MIN) -#define UAC_SET_MAX (UAC_SET_ | UAC__MAX) -#define UAC_GET_MAX (UAC_GET_ | UAC__MAX) -#define UAC_SET_RES (UAC_SET_ | UAC__RES) -#define UAC_GET_RES (UAC_GET_ | UAC__RES) -#define UAC_SET_MEM (UAC_SET_ | UAC__MEM) -#define UAC_GET_MEM (UAC_GET_ | UAC__MEM) - -#define UAC_GET_STAT 0xff - -/* A.10 Control Selector Codes */ - -/* A.10.1 Terminal Control Selectors */ -#define UAC_TERM_COPY_PROTECT 0x01 - -/* A.10.2 Feature Unit Control Selectors */ -#define UAC_FU_MUTE 0x01 -#define UAC_FU_VOLUME 0x02 -#define UAC_FU_BASS 0x03 -#define UAC_FU_MID 0x04 -#define UAC_FU_TREBLE 0x05 -#define UAC_FU_GRAPHIC_EQUALIZER 0x06 -#define UAC_FU_AUTOMATIC_GAIN 0x07 -#define UAC_FU_DELAY 0x08 -#define UAC_FU_BASS_BOOST 0x09 -#define UAC_FU_LOUDNESS 0x0a - -#define UAC_CONTROL_BIT(CS) (1 << ((CS) - 1)) - -/* A.10.3.1 Up/Down-mix Processing Unit Controls Selectors */ -#define UAC_UD_ENABLE 0x01 -#define UAC_UD_MODE_SELECT 0x02 - -/* A.10.3.2 Dolby Prologic (tm) Processing Unit Controls Selectors */ -#define UAC_DP_ENABLE 0x01 -#define UAC_DP_MODE_SELECT 0x02 - -/* A.10.3.3 3D Stereo Extender Processing Unit Control Selectors */ -#define UAC_3D_ENABLE 0x01 -#define UAC_3D_SPACE 0x02 - -/* A.10.3.4 Reverberation Processing Unit Control Selectors */ -#define UAC_REVERB_ENABLE 0x01 -#define UAC_REVERB_LEVEL 0x02 -#define UAC_REVERB_TIME 0x03 -#define UAC_REVERB_FEEDBACK 0x04 - -/* A.10.3.5 Chorus Processing Unit Control Selectors */ -#define UAC_CHORUS_ENABLE 0x01 -#define UAC_CHORUS_LEVEL 0x02 -#define UAC_CHORUS_RATE 0x03 -#define UAC_CHORUS_DEPTH 0x04 - -/* A.10.3.6 Dynamic Range Compressor Unit Control Selectors */ -#define UAC_DCR_ENABLE 0x01 -#define UAC_DCR_RATE 0x02 -#define UAC_DCR_MAXAMPL 0x03 -#define UAC_DCR_THRESHOLD 0x04 -#define UAC_DCR_ATTACK_TIME 0x05 -#define UAC_DCR_RELEASE_TIME 0x06 - -/* A.10.4 Extension Unit Control Selectors */ -#define UAC_XU_ENABLE 0x01 - -/* MIDI - A.1 MS Class-Specific Interface Descriptor Subtypes */ -#define UAC_MS_HEADER 0x01 -#define UAC_MIDI_IN_JACK 0x02 -#define UAC_MIDI_OUT_JACK 0x03 - -/* MIDI - A.1 MS Class-Specific Endpoint Descriptor Subtypes */ -#define UAC_MS_GENERAL 0x01 - -/* Terminals - 2.1 USB Terminal Types */ -#define UAC_TERMINAL_UNDEFINED 0x100 -#define UAC_TERMINAL_STREAMING 0x101 -#define UAC_TERMINAL_VENDOR_SPEC 0x1FF - -/* Terminal Control Selectors */ -/* 4.3.2 Class-Specific AC Interface Descriptor */ -struct uac1_ac_header_descriptor { - __u8 bLength; /* 8 + n */ - __u8 bDescriptorType; /* USB_DT_CS_INTERFACE */ - __u8 bDescriptorSubtype; /* UAC_MS_HEADER */ - __le16 bcdADC; /* 0x0100 */ - __le16 wTotalLength; /* includes Unit and Terminal desc. */ - __u8 bInCollection; /* n */ - __u8 baInterfaceNr[]; /* [n] */ -} __attribute__ ((packed)); - -#define UAC_DT_AC_HEADER_SIZE(n) (8 + (n)) - -/* As above, but more useful for defining your own descriptors: */ -#define DECLARE_UAC_AC_HEADER_DESCRIPTOR(n) \ -struct uac1_ac_header_descriptor_##n { \ - __u8 bLength; \ - __u8 bDescriptorType; \ - __u8 bDescriptorSubtype; \ - __le16 bcdADC; \ - __le16 wTotalLength; \ - __u8 bInCollection; \ - __u8 baInterfaceNr[n]; \ -} __attribute__ ((packed)) - -/* 4.3.2.1 Input Terminal Descriptor */ -struct uac_input_terminal_descriptor { - __u8 bLength; /* in bytes: 12 */ - __u8 bDescriptorType; /* CS_INTERFACE descriptor type */ - __u8 bDescriptorSubtype; /* INPUT_TERMINAL descriptor subtype */ - __u8 bTerminalID; /* Constant uniquely terminal ID */ - __le16 wTerminalType; /* USB Audio Terminal Types */ - __u8 bAssocTerminal; /* ID of the Output Terminal associated */ - __u8 bNrChannels; /* Number of logical output channels */ - __le16 wChannelConfig; - __u8 iChannelNames; - __u8 iTerminal; -} __attribute__ ((packed)); - -#define UAC_DT_INPUT_TERMINAL_SIZE 12 - -/* Terminals - 2.2 Input Terminal Types */ -#define UAC_INPUT_TERMINAL_UNDEFINED 0x200 -#define UAC_INPUT_TERMINAL_MICROPHONE 0x201 -#define UAC_INPUT_TERMINAL_DESKTOP_MICROPHONE 0x202 -#define UAC_INPUT_TERMINAL_PERSONAL_MICROPHONE 0x203 -#define UAC_INPUT_TERMINAL_OMNI_DIR_MICROPHONE 0x204 -#define UAC_INPUT_TERMINAL_MICROPHONE_ARRAY 0x205 -#define UAC_INPUT_TERMINAL_PROC_MICROPHONE_ARRAY 0x206 - -/* Terminals - control selectors */ - -#define UAC_TERMINAL_CS_COPY_PROTECT_CONTROL 0x01 - -/* 4.3.2.2 Output Terminal Descriptor */ -struct uac1_output_terminal_descriptor { - __u8 bLength; /* in bytes: 9 */ - __u8 bDescriptorType; /* CS_INTERFACE descriptor type */ - __u8 bDescriptorSubtype; /* OUTPUT_TERMINAL descriptor subtype */ - __u8 bTerminalID; /* Constant uniquely terminal ID */ - __le16 wTerminalType; /* USB Audio Terminal Types */ - __u8 bAssocTerminal; /* ID of the Input Terminal associated */ - __u8 bSourceID; /* ID of the connected Unit or Terminal*/ - __u8 iTerminal; -} __attribute__ ((packed)); - -#define UAC_DT_OUTPUT_TERMINAL_SIZE 9 - -/* Terminals - 2.3 Output Terminal Types */ -#define UAC_OUTPUT_TERMINAL_UNDEFINED 0x300 -#define UAC_OUTPUT_TERMINAL_SPEAKER 0x301 -#define UAC_OUTPUT_TERMINAL_HEADPHONES 0x302 -#define UAC_OUTPUT_TERMINAL_HEAD_MOUNTED_DISPLAY_AUDIO 0x303 -#define UAC_OUTPUT_TERMINAL_DESKTOP_SPEAKER 0x304 -#define UAC_OUTPUT_TERMINAL_ROOM_SPEAKER 0x305 -#define UAC_OUTPUT_TERMINAL_COMMUNICATION_SPEAKER 0x306 -#define UAC_OUTPUT_TERMINAL_LOW_FREQ_EFFECTS_SPEAKER 0x307 - -/* Set bControlSize = 2 as default setting */ -#define UAC_DT_FEATURE_UNIT_SIZE(ch) (7 + ((ch) + 1) * 2) - -/* As above, but more useful for defining your own descriptors: */ -#define DECLARE_UAC_FEATURE_UNIT_DESCRIPTOR(ch) \ -struct uac_feature_unit_descriptor_##ch { \ - __u8 bLength; \ - __u8 bDescriptorType; \ - __u8 bDescriptorSubtype; \ - __u8 bUnitID; \ - __u8 bSourceID; \ - __u8 bControlSize; \ - __le16 bmaControls[ch + 1]; \ - __u8 iFeature; \ -} __attribute__ ((packed)) - -/* 4.3.2.3 Mixer Unit Descriptor */ -struct uac_mixer_unit_descriptor { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDescriptorSubtype; - __u8 bUnitID; - __u8 bNrInPins; - __u8 baSourceID[]; -} __attribute__ ((packed)); +#include -static inline __u8 uac_mixer_unit_bNrChannels(struct uac_mixer_unit_descriptor *desc) -{ - return desc->baSourceID[desc->bNrInPins]; -} - -static inline __u32 uac_mixer_unit_wChannelConfig(struct uac_mixer_unit_descriptor *desc, - int protocol) -{ - if (protocol == UAC_VERSION_1) - return (desc->baSourceID[desc->bNrInPins + 2] << 8) | - desc->baSourceID[desc->bNrInPins + 1]; - else - return (desc->baSourceID[desc->bNrInPins + 4] << 24) | - (desc->baSourceID[desc->bNrInPins + 3] << 16) | - (desc->baSourceID[desc->bNrInPins + 2] << 8) | - (desc->baSourceID[desc->bNrInPins + 1]); -} - -static inline __u8 uac_mixer_unit_iChannelNames(struct uac_mixer_unit_descriptor *desc, - int protocol) -{ - return (protocol == UAC_VERSION_1) ? - desc->baSourceID[desc->bNrInPins + 3] : - desc->baSourceID[desc->bNrInPins + 5]; -} - -static inline __u8 *uac_mixer_unit_bmControls(struct uac_mixer_unit_descriptor *desc, - int protocol) -{ - return (protocol == UAC_VERSION_1) ? - &desc->baSourceID[desc->bNrInPins + 4] : - &desc->baSourceID[desc->bNrInPins + 6]; -} - -static inline __u8 uac_mixer_unit_iMixer(struct uac_mixer_unit_descriptor *desc) -{ - __u8 *raw = (__u8 *) desc; - return raw[desc->bLength - 1]; -} - -/* 4.3.2.4 Selector Unit Descriptor */ -struct uac_selector_unit_descriptor { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDescriptorSubtype; - __u8 bUintID; - __u8 bNrInPins; - __u8 baSourceID[]; -} __attribute__ ((packed)); - -static inline __u8 uac_selector_unit_iSelector(struct uac_selector_unit_descriptor *desc) -{ - __u8 *raw = (__u8 *) desc; - return raw[desc->bLength - 1]; -} - -/* 4.3.2.5 Feature Unit Descriptor */ -struct uac_feature_unit_descriptor { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDescriptorSubtype; - __u8 bUnitID; - __u8 bSourceID; - __u8 bControlSize; - __u8 bmaControls[0]; /* variable length */ -} __attribute__((packed)); - -static inline __u8 uac_feature_unit_iFeature(struct uac_feature_unit_descriptor *desc) -{ - __u8 *raw = (__u8 *) desc; - return raw[desc->bLength - 1]; -} - -/* 4.3.2.6 Processing Unit Descriptors */ -struct uac_processing_unit_descriptor { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDescriptorSubtype; - __u8 bUnitID; - __u16 wProcessType; - __u8 bNrInPins; - __u8 baSourceID[]; -} __attribute__ ((packed)); - -static inline __u8 uac_processing_unit_bNrChannels(struct uac_processing_unit_descriptor *desc) -{ - return desc->baSourceID[desc->bNrInPins]; -} - -static inline __u32 uac_processing_unit_wChannelConfig(struct uac_processing_unit_descriptor *desc, - int protocol) -{ - if (protocol == UAC_VERSION_1) - return (desc->baSourceID[desc->bNrInPins + 2] << 8) | - desc->baSourceID[desc->bNrInPins + 1]; - else - return (desc->baSourceID[desc->bNrInPins + 4] << 24) | - (desc->baSourceID[desc->bNrInPins + 3] << 16) | - (desc->baSourceID[desc->bNrInPins + 2] << 8) | - (desc->baSourceID[desc->bNrInPins + 1]); -} - -static inline __u8 uac_processing_unit_iChannelNames(struct uac_processing_unit_descriptor *desc, - int protocol) -{ - return (protocol == UAC_VERSION_1) ? - desc->baSourceID[desc->bNrInPins + 3] : - desc->baSourceID[desc->bNrInPins + 5]; -} - -static inline __u8 uac_processing_unit_bControlSize(struct uac_processing_unit_descriptor *desc, - int protocol) -{ - return (protocol == UAC_VERSION_1) ? - desc->baSourceID[desc->bNrInPins + 4] : - desc->baSourceID[desc->bNrInPins + 6]; -} - -static inline __u8 *uac_processing_unit_bmControls(struct uac_processing_unit_descriptor *desc, - int protocol) -{ - return (protocol == UAC_VERSION_1) ? - &desc->baSourceID[desc->bNrInPins + 5] : - &desc->baSourceID[desc->bNrInPins + 7]; -} - -static inline __u8 uac_processing_unit_iProcessing(struct uac_processing_unit_descriptor *desc, - int protocol) -{ - __u8 control_size = uac_processing_unit_bControlSize(desc, protocol); - return desc->baSourceID[desc->bNrInPins + control_size]; -} - -static inline __u8 *uac_processing_unit_specific(struct uac_processing_unit_descriptor *desc, - int protocol) -{ - __u8 control_size = uac_processing_unit_bControlSize(desc, protocol); - return &desc->baSourceID[desc->bNrInPins + control_size + 1]; -} - -/* 4.5.2 Class-Specific AS Interface Descriptor */ -struct uac1_as_header_descriptor { - __u8 bLength; /* in bytes: 7 */ - __u8 bDescriptorType; /* USB_DT_CS_INTERFACE */ - __u8 bDescriptorSubtype; /* AS_GENERAL */ - __u8 bTerminalLink; /* Terminal ID of connected Terminal */ - __u8 bDelay; /* Delay introduced by the data path */ - __le16 wFormatTag; /* The Audio Data Format */ -} __attribute__ ((packed)); - -#define UAC_DT_AS_HEADER_SIZE 7 - -/* Formats - A.1.1 Audio Data Format Type I Codes */ -#define UAC_FORMAT_TYPE_I_UNDEFINED 0x0 -#define UAC_FORMAT_TYPE_I_PCM 0x1 -#define UAC_FORMAT_TYPE_I_PCM8 0x2 -#define UAC_FORMAT_TYPE_I_IEEE_FLOAT 0x3 -#define UAC_FORMAT_TYPE_I_ALAW 0x4 -#define UAC_FORMAT_TYPE_I_MULAW 0x5 - -struct uac_format_type_i_continuous_descriptor { - __u8 bLength; /* in bytes: 8 + (ns * 3) */ - __u8 bDescriptorType; /* USB_DT_CS_INTERFACE */ - __u8 bDescriptorSubtype; /* FORMAT_TYPE */ - __u8 bFormatType; /* FORMAT_TYPE_1 */ - __u8 bNrChannels; /* physical channels in the stream */ - __u8 bSubframeSize; /* */ - __u8 bBitResolution; - __u8 bSamFreqType; - __u8 tLowerSamFreq[3]; - __u8 tUpperSamFreq[3]; -} __attribute__ ((packed)); - -#define UAC_FORMAT_TYPE_I_CONTINUOUS_DESC_SIZE 14 - -struct uac_format_type_i_discrete_descriptor { - __u8 bLength; /* in bytes: 8 + (ns * 3) */ - __u8 bDescriptorType; /* USB_DT_CS_INTERFACE */ - __u8 bDescriptorSubtype; /* FORMAT_TYPE */ - __u8 bFormatType; /* FORMAT_TYPE_1 */ - __u8 bNrChannels; /* physical channels in the stream */ - __u8 bSubframeSize; /* */ - __u8 bBitResolution; - __u8 bSamFreqType; - __u8 tSamFreq[][3]; -} __attribute__ ((packed)); - -#define DECLARE_UAC_FORMAT_TYPE_I_DISCRETE_DESC(n) \ -struct uac_format_type_i_discrete_descriptor_##n { \ - __u8 bLength; \ - __u8 bDescriptorType; \ - __u8 bDescriptorSubtype; \ - __u8 bFormatType; \ - __u8 bNrChannels; \ - __u8 bSubframeSize; \ - __u8 bBitResolution; \ - __u8 bSamFreqType; \ - __u8 tSamFreq[n][3]; \ -} __attribute__ ((packed)) - -#define UAC_FORMAT_TYPE_I_DISCRETE_DESC_SIZE(n) (8 + (n * 3)) - -struct uac_format_type_i_ext_descriptor { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDescriptorSubtype; - __u8 bFormatType; - __u8 bSubslotSize; - __u8 bBitResolution; - __u8 bHeaderLength; - __u8 bControlSize; - __u8 bSideBandProtocol; -} __attribute__((packed)); - -/* Formats - Audio Data Format Type I Codes */ - -#define UAC_FORMAT_TYPE_II_MPEG 0x1001 -#define UAC_FORMAT_TYPE_II_AC3 0x1002 - -struct uac_format_type_ii_discrete_descriptor { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDescriptorSubtype; - __u8 bFormatType; - __le16 wMaxBitRate; - __le16 wSamplesPerFrame; - __u8 bSamFreqType; - __u8 tSamFreq[][3]; -} __attribute__((packed)); - -struct uac_format_type_ii_ext_descriptor { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDescriptorSubtype; - __u8 bFormatType; - __u16 wMaxBitRate; - __u16 wSamplesPerFrame; - __u8 bHeaderLength; - __u8 bSideBandProtocol; -} __attribute__((packed)); - -/* type III */ -#define UAC_FORMAT_TYPE_III_IEC1937_AC3 0x2001 -#define UAC_FORMAT_TYPE_III_IEC1937_MPEG1_LAYER1 0x2002 -#define UAC_FORMAT_TYPE_III_IEC1937_MPEG2_NOEXT 0x2003 -#define UAC_FORMAT_TYPE_III_IEC1937_MPEG2_EXT 0x2004 -#define UAC_FORMAT_TYPE_III_IEC1937_MPEG2_LAYER1_LS 0x2005 -#define UAC_FORMAT_TYPE_III_IEC1937_MPEG2_LAYER23_LS 0x2006 - -/* Formats - A.2 Format Type Codes */ -#define UAC_FORMAT_TYPE_UNDEFINED 0x0 -#define UAC_FORMAT_TYPE_I 0x1 -#define UAC_FORMAT_TYPE_II 0x2 -#define UAC_FORMAT_TYPE_III 0x3 -#define UAC_EXT_FORMAT_TYPE_I 0x81 -#define UAC_EXT_FORMAT_TYPE_II 0x82 -#define UAC_EXT_FORMAT_TYPE_III 0x83 - -struct uac_iso_endpoint_descriptor { - __u8 bLength; /* in bytes: 7 */ - __u8 bDescriptorType; /* USB_DT_CS_ENDPOINT */ - __u8 bDescriptorSubtype; /* EP_GENERAL */ - __u8 bmAttributes; - __u8 bLockDelayUnits; - __le16 wLockDelay; -} __attribute__((packed)); -#define UAC_ISO_ENDPOINT_DESC_SIZE 7 - -#define UAC_EP_CS_ATTR_SAMPLE_RATE 0x01 -#define UAC_EP_CS_ATTR_PITCH_CONTROL 0x02 -#define UAC_EP_CS_ATTR_FILL_MAX 0x80 - -/* status word format (3.7.1.1) */ - -#define UAC1_STATUS_TYPE_ORIG_MASK 0x0f -#define UAC1_STATUS_TYPE_ORIG_AUDIO_CONTROL_IF 0x0 -#define UAC1_STATUS_TYPE_ORIG_AUDIO_STREAM_IF 0x1 -#define UAC1_STATUS_TYPE_ORIG_AUDIO_STREAM_EP 0x2 - -#define UAC1_STATUS_TYPE_IRQ_PENDING (1 << 7) -#define UAC1_STATUS_TYPE_MEM_CHANGED (1 << 6) - -struct uac1_status_word { - __u8 bStatusType; - __u8 bOriginator; -} __attribute__((packed)); - -#ifdef __KERNEL__ struct usb_audio_control { struct list_head list; @@ -561,6 +41,4 @@ struct usb_audio_control_selector { struct usb_descriptor_header *desc; }; -#endif /* __KERNEL__ */ - #endif /* __LINUX_USB_AUDIO_H */ diff --git a/include/linux/usb/cdc.h b/include/linux/usb/cdc.h deleted file mode 100644 index 81a927930bfd..000000000000 --- a/include/linux/usb/cdc.h +++ /dev/null @@ -1,412 +0,0 @@ -/* - * USB Communications Device Class (CDC) definitions - * - * CDC says how to talk to lots of different types of network adapters, - * notably ethernet adapters and various modems. It's used mostly with - * firmware based USB peripherals. - */ - -#ifndef __LINUX_USB_CDC_H -#define __LINUX_USB_CDC_H - -#include - -#define USB_CDC_SUBCLASS_ACM 0x02 -#define USB_CDC_SUBCLASS_ETHERNET 0x06 -#define USB_CDC_SUBCLASS_WHCM 0x08 -#define USB_CDC_SUBCLASS_DMM 0x09 -#define USB_CDC_SUBCLASS_MDLM 0x0a -#define USB_CDC_SUBCLASS_OBEX 0x0b -#define USB_CDC_SUBCLASS_EEM 0x0c -#define USB_CDC_SUBCLASS_NCM 0x0d - -#define USB_CDC_PROTO_NONE 0 - -#define USB_CDC_ACM_PROTO_AT_V25TER 1 -#define USB_CDC_ACM_PROTO_AT_PCCA101 2 -#define USB_CDC_ACM_PROTO_AT_PCCA101_WAKE 3 -#define USB_CDC_ACM_PROTO_AT_GSM 4 -#define USB_CDC_ACM_PROTO_AT_3G 5 -#define USB_CDC_ACM_PROTO_AT_CDMA 6 -#define USB_CDC_ACM_PROTO_VENDOR 0xff - -#define USB_CDC_PROTO_EEM 7 - -#define USB_CDC_NCM_PROTO_NTB 1 - -/*-------------------------------------------------------------------------*/ - -/* - * Class-Specific descriptors ... there are a couple dozen of them - */ - -#define USB_CDC_HEADER_TYPE 0x00 /* header_desc */ -#define USB_CDC_CALL_MANAGEMENT_TYPE 0x01 /* call_mgmt_descriptor */ -#define USB_CDC_ACM_TYPE 0x02 /* acm_descriptor */ -#define USB_CDC_UNION_TYPE 0x06 /* union_desc */ -#define USB_CDC_COUNTRY_TYPE 0x07 -#define USB_CDC_NETWORK_TERMINAL_TYPE 0x0a /* network_terminal_desc */ -#define USB_CDC_ETHERNET_TYPE 0x0f /* ether_desc */ -#define USB_CDC_WHCM_TYPE 0x11 -#define USB_CDC_MDLM_TYPE 0x12 /* mdlm_desc */ -#define USB_CDC_MDLM_DETAIL_TYPE 0x13 /* mdlm_detail_desc */ -#define USB_CDC_DMM_TYPE 0x14 -#define USB_CDC_OBEX_TYPE 0x15 -#define USB_CDC_NCM_TYPE 0x1a - -/* "Header Functional Descriptor" from CDC spec 5.2.3.1 */ -struct usb_cdc_header_desc { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDescriptorSubType; - - __le16 bcdCDC; -} __attribute__ ((packed)); - -/* "Call Management Descriptor" from CDC spec 5.2.3.2 */ -struct usb_cdc_call_mgmt_descriptor { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDescriptorSubType; - - __u8 bmCapabilities; -#define USB_CDC_CALL_MGMT_CAP_CALL_MGMT 0x01 -#define USB_CDC_CALL_MGMT_CAP_DATA_INTF 0x02 - - __u8 bDataInterface; -} __attribute__ ((packed)); - -/* "Abstract Control Management Descriptor" from CDC spec 5.2.3.3 */ -struct usb_cdc_acm_descriptor { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDescriptorSubType; - - __u8 bmCapabilities; -} __attribute__ ((packed)); - -/* capabilities from 5.2.3.3 */ - -#define USB_CDC_COMM_FEATURE 0x01 -#define USB_CDC_CAP_LINE 0x02 -#define USB_CDC_CAP_BRK 0x04 -#define USB_CDC_CAP_NOTIFY 0x08 - -/* "Union Functional Descriptor" from CDC spec 5.2.3.8 */ -struct usb_cdc_union_desc { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDescriptorSubType; - - __u8 bMasterInterface0; - __u8 bSlaveInterface0; - /* ... and there could be other slave interfaces */ -} __attribute__ ((packed)); - -/* "Country Selection Functional Descriptor" from CDC spec 5.2.3.9 */ -struct usb_cdc_country_functional_desc { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDescriptorSubType; - - __u8 iCountryCodeRelDate; - __le16 wCountyCode0; - /* ... and there can be a lot of country codes */ -} __attribute__ ((packed)); - -/* "Network Channel Terminal Functional Descriptor" from CDC spec 5.2.3.11 */ -struct usb_cdc_network_terminal_desc { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDescriptorSubType; - - __u8 bEntityId; - __u8 iName; - __u8 bChannelIndex; - __u8 bPhysicalInterface; -} __attribute__ ((packed)); - -/* "Ethernet Networking Functional Descriptor" from CDC spec 5.2.3.16 */ -struct usb_cdc_ether_desc { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDescriptorSubType; - - __u8 iMACAddress; - __le32 bmEthernetStatistics; - __le16 wMaxSegmentSize; - __le16 wNumberMCFilters; - __u8 bNumberPowerFilters; -} __attribute__ ((packed)); - -/* "Telephone Control Model Functional Descriptor" from CDC WMC spec 6.3..3 */ -struct usb_cdc_dmm_desc { - __u8 bFunctionLength; - __u8 bDescriptorType; - __u8 bDescriptorSubtype; - __u16 bcdVersion; - __le16 wMaxCommand; -} __attribute__ ((packed)); - -/* "MDLM Functional Descriptor" from CDC WMC spec 6.7.2.3 */ -struct usb_cdc_mdlm_desc { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDescriptorSubType; - - __le16 bcdVersion; - __u8 bGUID[16]; -} __attribute__ ((packed)); - -/* "MDLM Detail Functional Descriptor" from CDC WMC spec 6.7.2.4 */ -struct usb_cdc_mdlm_detail_desc { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDescriptorSubType; - - /* type is associated with mdlm_desc.bGUID */ - __u8 bGuidDescriptorType; - __u8 bDetailData[0]; -} __attribute__ ((packed)); - -/* "OBEX Control Model Functional Descriptor" */ -struct usb_cdc_obex_desc { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDescriptorSubType; - - __le16 bcdVersion; -} __attribute__ ((packed)); - -/* "NCM Control Model Functional Descriptor" */ -struct usb_cdc_ncm_desc { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDescriptorSubType; - - __le16 bcdNcmVersion; - __u8 bmNetworkCapabilities; -} __attribute__ ((packed)); -/*-------------------------------------------------------------------------*/ - -/* - * Class-Specific Control Requests (6.2) - * - * section 3.6.2.1 table 4 has the ACM profile, for modems. - * section 3.8.2 table 10 has the ethernet profile. - * - * Microsoft's RNDIS stack for Ethernet is a vendor-specific CDC ACM variant, - * heavily dependent on the encapsulated (proprietary) command mechanism. - */ - -#define USB_CDC_SEND_ENCAPSULATED_COMMAND 0x00 -#define USB_CDC_GET_ENCAPSULATED_RESPONSE 0x01 -#define USB_CDC_REQ_SET_LINE_CODING 0x20 -#define USB_CDC_REQ_GET_LINE_CODING 0x21 -#define USB_CDC_REQ_SET_CONTROL_LINE_STATE 0x22 -#define USB_CDC_REQ_SEND_BREAK 0x23 -#define USB_CDC_SET_ETHERNET_MULTICAST_FILTERS 0x40 -#define USB_CDC_SET_ETHERNET_PM_PATTERN_FILTER 0x41 -#define USB_CDC_GET_ETHERNET_PM_PATTERN_FILTER 0x42 -#define USB_CDC_SET_ETHERNET_PACKET_FILTER 0x43 -#define USB_CDC_GET_ETHERNET_STATISTIC 0x44 -#define USB_CDC_GET_NTB_PARAMETERS 0x80 -#define USB_CDC_GET_NET_ADDRESS 0x81 -#define USB_CDC_SET_NET_ADDRESS 0x82 -#define USB_CDC_GET_NTB_FORMAT 0x83 -#define USB_CDC_SET_NTB_FORMAT 0x84 -#define USB_CDC_GET_NTB_INPUT_SIZE 0x85 -#define USB_CDC_SET_NTB_INPUT_SIZE 0x86 -#define USB_CDC_GET_MAX_DATAGRAM_SIZE 0x87 -#define USB_CDC_SET_MAX_DATAGRAM_SIZE 0x88 -#define USB_CDC_GET_CRC_MODE 0x89 -#define USB_CDC_SET_CRC_MODE 0x8a - -/* Line Coding Structure from CDC spec 6.2.13 */ -struct usb_cdc_line_coding { - __le32 dwDTERate; - __u8 bCharFormat; -#define USB_CDC_1_STOP_BITS 0 -#define USB_CDC_1_5_STOP_BITS 1 -#define USB_CDC_2_STOP_BITS 2 - - __u8 bParityType; -#define USB_CDC_NO_PARITY 0 -#define USB_CDC_ODD_PARITY 1 -#define USB_CDC_EVEN_PARITY 2 -#define USB_CDC_MARK_PARITY 3 -#define USB_CDC_SPACE_PARITY 4 - - __u8 bDataBits; -} __attribute__ ((packed)); - -/* table 62; bits in multicast filter */ -#define USB_CDC_PACKET_TYPE_PROMISCUOUS (1 << 0) -#define USB_CDC_PACKET_TYPE_ALL_MULTICAST (1 << 1) /* no filter */ -#define USB_CDC_PACKET_TYPE_DIRECTED (1 << 2) -#define USB_CDC_PACKET_TYPE_BROADCAST (1 << 3) -#define USB_CDC_PACKET_TYPE_MULTICAST (1 << 4) /* filtered */ - - -/*-------------------------------------------------------------------------*/ - -/* - * Class-Specific Notifications (6.3) sent by interrupt transfers - * - * section 3.8.2 table 11 of the CDC spec lists Ethernet notifications - * section 3.6.2.1 table 5 specifies ACM notifications, accepted by RNDIS - * RNDIS also defines its own bit-incompatible notifications - */ - -#define USB_CDC_NOTIFY_NETWORK_CONNECTION 0x00 -#define USB_CDC_NOTIFY_RESPONSE_AVAILABLE 0x01 -#define USB_CDC_NOTIFY_SERIAL_STATE 0x20 -#define USB_CDC_NOTIFY_SPEED_CHANGE 0x2a - -struct usb_cdc_notification { - __u8 bmRequestType; - __u8 bNotificationType; - __le16 wValue; - __le16 wIndex; - __le16 wLength; -} __attribute__ ((packed)); - -struct usb_cdc_speed_change { - __le32 DLBitRRate; /* contains the downlink bit rate (IN pipe) */ - __le32 ULBitRate; /* contains the uplink bit rate (OUT pipe) */ -} __attribute__ ((packed)); - -/*-------------------------------------------------------------------------*/ - -/* - * Class Specific structures and constants - * - * CDC NCM NTB parameters structure, CDC NCM subclass 6.2.1 - * - */ - -struct usb_cdc_ncm_ntb_parameters { - __le16 wLength; - __le16 bmNtbFormatsSupported; - __le32 dwNtbInMaxSize; - __le16 wNdpInDivisor; - __le16 wNdpInPayloadRemainder; - __le16 wNdpInAlignment; - __le16 wPadding1; - __le32 dwNtbOutMaxSize; - __le16 wNdpOutDivisor; - __le16 wNdpOutPayloadRemainder; - __le16 wNdpOutAlignment; - __le16 wNtbOutMaxDatagrams; -} __attribute__ ((packed)); - -/* - * CDC NCM transfer headers, CDC NCM subclass 3.2 - */ - -#define USB_CDC_NCM_NTH16_SIGN 0x484D434E /* NCMH */ -#define USB_CDC_NCM_NTH32_SIGN 0x686D636E /* ncmh */ - -struct usb_cdc_ncm_nth16 { - __le32 dwSignature; - __le16 wHeaderLength; - __le16 wSequence; - __le16 wBlockLength; - __le16 wNdpIndex; -} __attribute__ ((packed)); - -struct usb_cdc_ncm_nth32 { - __le32 dwSignature; - __le16 wHeaderLength; - __le16 wSequence; - __le32 dwBlockLength; - __le32 dwNdpIndex; -} __attribute__ ((packed)); - -/* - * CDC NCM datagram pointers, CDC NCM subclass 3.3 - */ - -#define USB_CDC_NCM_NDP16_CRC_SIGN 0x314D434E /* NCM1 */ -#define USB_CDC_NCM_NDP16_NOCRC_SIGN 0x304D434E /* NCM0 */ -#define USB_CDC_NCM_NDP32_CRC_SIGN 0x316D636E /* ncm1 */ -#define USB_CDC_NCM_NDP32_NOCRC_SIGN 0x306D636E /* ncm0 */ - -/* 16-bit NCM Datagram Pointer Entry */ -struct usb_cdc_ncm_dpe16 { - __le16 wDatagramIndex; - __le16 wDatagramLength; -} __attribute__((__packed__)); - -/* 16-bit NCM Datagram Pointer Table */ -struct usb_cdc_ncm_ndp16 { - __le32 dwSignature; - __le16 wLength; - __le16 wNextNdpIndex; - struct usb_cdc_ncm_dpe16 dpe16[0]; -} __attribute__ ((packed)); - -/* 32-bit NCM Datagram Pointer Entry */ -struct usb_cdc_ncm_dpe32 { - __le32 dwDatagramIndex; - __le32 dwDatagramLength; -} __attribute__((__packed__)); - -/* 32-bit NCM Datagram Pointer Table */ -struct usb_cdc_ncm_ndp32 { - __le32 dwSignature; - __le16 wLength; - __le16 wReserved6; - __le32 dwNextNdpIndex; - __le32 dwReserved12; - struct usb_cdc_ncm_dpe32 dpe32[0]; -} __attribute__ ((packed)); - -/* CDC NCM subclass 3.2.1 and 3.2.2 */ -#define USB_CDC_NCM_NDP16_INDEX_MIN 0x000C -#define USB_CDC_NCM_NDP32_INDEX_MIN 0x0010 - -/* CDC NCM subclass 3.3.3 Datagram Formatting */ -#define USB_CDC_NCM_DATAGRAM_FORMAT_CRC 0x30 -#define USB_CDC_NCM_DATAGRAM_FORMAT_NOCRC 0X31 - -/* CDC NCM subclass 4.2 NCM Communications Interface Protocol Code */ -#define USB_CDC_NCM_PROTO_CODE_NO_ENCAP_COMMANDS 0x00 -#define USB_CDC_NCM_PROTO_CODE_EXTERN_PROTO 0xFE - -/* CDC NCM subclass 5.2.1 NCM Functional Descriptor, bmNetworkCapabilities */ -#define USB_CDC_NCM_NCAP_ETH_FILTER (1 << 0) -#define USB_CDC_NCM_NCAP_NET_ADDRESS (1 << 1) -#define USB_CDC_NCM_NCAP_ENCAP_COMMAND (1 << 2) -#define USB_CDC_NCM_NCAP_MAX_DATAGRAM_SIZE (1 << 3) -#define USB_CDC_NCM_NCAP_CRC_MODE (1 << 4) -#define USB_CDC_NCM_NCAP_NTB_INPUT_SIZE (1 << 5) - -/* CDC NCM subclass Table 6-3: NTB Parameter Structure */ -#define USB_CDC_NCM_NTB16_SUPPORTED (1 << 0) -#define USB_CDC_NCM_NTB32_SUPPORTED (1 << 1) - -/* CDC NCM subclass Table 6-3: NTB Parameter Structure */ -#define USB_CDC_NCM_NDP_ALIGN_MIN_SIZE 0x04 -#define USB_CDC_NCM_NTB_MAX_LENGTH 0x1C - -/* CDC NCM subclass 6.2.5 SetNtbFormat */ -#define USB_CDC_NCM_NTB16_FORMAT 0x00 -#define USB_CDC_NCM_NTB32_FORMAT 0x01 - -/* CDC NCM subclass 6.2.7 SetNtbInputSize */ -#define USB_CDC_NCM_NTB_MIN_IN_SIZE 2048 -#define USB_CDC_NCM_NTB_MIN_OUT_SIZE 2048 - -/* NTB Input Size Structure */ -struct usb_cdc_ncm_ndp_input_size { - __le32 dwNtbInMaxSize; - __le16 wNtbInMaxDatagrams; - __le16 wReserved; -} __attribute__ ((packed)); - -/* CDC NCM subclass 6.2.11 SetCrcMode */ -#define USB_CDC_NCM_CRC_NOT_APPENDED 0x00 -#define USB_CDC_NCM_CRC_APPENDED 0x01 - -#endif /* __LINUX_USB_CDC_H */ diff --git a/include/linux/usb/ch11.h b/include/linux/usb/ch11.h deleted file mode 100644 index 7692dc69ccf7..000000000000 --- a/include/linux/usb/ch11.h +++ /dev/null @@ -1,266 +0,0 @@ -/* - * This file holds Hub protocol constants and data structures that are - * defined in chapter 11 (Hub Specification) of the USB 2.0 specification. - * - * It is used/shared between the USB core, the HCDs and couple of other USB - * drivers. - */ - -#ifndef __LINUX_CH11_H -#define __LINUX_CH11_H - -#include /* __u8 etc */ - -/* - * Hub request types - */ - -#define USB_RT_HUB (USB_TYPE_CLASS | USB_RECIP_DEVICE) -#define USB_RT_PORT (USB_TYPE_CLASS | USB_RECIP_OTHER) - -/* - * Hub class requests - * See USB 2.0 spec Table 11-16 - */ -#define HUB_CLEAR_TT_BUFFER 8 -#define HUB_RESET_TT 9 -#define HUB_GET_TT_STATE 10 -#define HUB_STOP_TT 11 - -/* - * Hub class additional requests defined by USB 3.0 spec - * See USB 3.0 spec Table 10-6 - */ -#define HUB_SET_DEPTH 12 -#define HUB_GET_PORT_ERR_COUNT 13 - -/* - * Hub Class feature numbers - * See USB 2.0 spec Table 11-17 - */ -#define C_HUB_LOCAL_POWER 0 -#define C_HUB_OVER_CURRENT 1 - -/* - * Port feature numbers - * See USB 2.0 spec Table 11-17 - */ -#define USB_PORT_FEAT_CONNECTION 0 -#define USB_PORT_FEAT_ENABLE 1 -#define USB_PORT_FEAT_SUSPEND 2 /* L2 suspend */ -#define USB_PORT_FEAT_OVER_CURRENT 3 -#define USB_PORT_FEAT_RESET 4 -#define USB_PORT_FEAT_L1 5 /* L1 suspend */ -#define USB_PORT_FEAT_POWER 8 -#define USB_PORT_FEAT_LOWSPEED 9 /* Should never be used */ -#define USB_PORT_FEAT_C_CONNECTION 16 -#define USB_PORT_FEAT_C_ENABLE 17 -#define USB_PORT_FEAT_C_SUSPEND 18 -#define USB_PORT_FEAT_C_OVER_CURRENT 19 -#define USB_PORT_FEAT_C_RESET 20 -#define USB_PORT_FEAT_TEST 21 -#define USB_PORT_FEAT_INDICATOR 22 -#define USB_PORT_FEAT_C_PORT_L1 23 - -/* - * Port feature selectors added by USB 3.0 spec. - * See USB 3.0 spec Table 10-7 - */ -#define USB_PORT_FEAT_LINK_STATE 5 -#define USB_PORT_FEAT_U1_TIMEOUT 23 -#define USB_PORT_FEAT_U2_TIMEOUT 24 -#define USB_PORT_FEAT_C_PORT_LINK_STATE 25 -#define USB_PORT_FEAT_C_PORT_CONFIG_ERROR 26 -#define USB_PORT_FEAT_REMOTE_WAKE_MASK 27 -#define USB_PORT_FEAT_BH_PORT_RESET 28 -#define USB_PORT_FEAT_C_BH_PORT_RESET 29 -#define USB_PORT_FEAT_FORCE_LINKPM_ACCEPT 30 - -#define USB_PORT_LPM_TIMEOUT(p) (((p) & 0xff) << 8) - -/* USB 3.0 hub remote wake mask bits, see table 10-14 */ -#define USB_PORT_FEAT_REMOTE_WAKE_CONNECT (1 << 8) -#define USB_PORT_FEAT_REMOTE_WAKE_DISCONNECT (1 << 9) -#define USB_PORT_FEAT_REMOTE_WAKE_OVER_CURRENT (1 << 10) - -/* - * Hub Status and Hub Change results - * See USB 2.0 spec Table 11-19 and Table 11-20 - */ -struct usb_port_status { - __le16 wPortStatus; - __le16 wPortChange; -} __attribute__ ((packed)); - -/* - * wPortStatus bit field - * See USB 2.0 spec Table 11-21 - */ -#define USB_PORT_STAT_CONNECTION 0x0001 -#define USB_PORT_STAT_ENABLE 0x0002 -#define USB_PORT_STAT_SUSPEND 0x0004 -#define USB_PORT_STAT_OVERCURRENT 0x0008 -#define USB_PORT_STAT_RESET 0x0010 -#define USB_PORT_STAT_L1 0x0020 -/* bits 6 to 7 are reserved */ -#define USB_PORT_STAT_POWER 0x0100 -#define USB_PORT_STAT_LOW_SPEED 0x0200 -#define USB_PORT_STAT_HIGH_SPEED 0x0400 -#define USB_PORT_STAT_TEST 0x0800 -#define USB_PORT_STAT_INDICATOR 0x1000 -/* bits 13 to 15 are reserved */ - -/* - * Additions to wPortStatus bit field from USB 3.0 - * See USB 3.0 spec Table 10-10 - */ -#define USB_PORT_STAT_LINK_STATE 0x01e0 -#define USB_SS_PORT_STAT_POWER 0x0200 -#define USB_SS_PORT_STAT_SPEED 0x1c00 -#define USB_PORT_STAT_SPEED_5GBPS 0x0000 -/* Valid only if port is enabled */ -/* Bits that are the same from USB 2.0 */ -#define USB_SS_PORT_STAT_MASK (USB_PORT_STAT_CONNECTION | \ - USB_PORT_STAT_ENABLE | \ - USB_PORT_STAT_OVERCURRENT | \ - USB_PORT_STAT_RESET) - -/* - * Definitions for PORT_LINK_STATE values - * (bits 5-8) in wPortStatus - */ -#define USB_SS_PORT_LS_U0 0x0000 -#define USB_SS_PORT_LS_U1 0x0020 -#define USB_SS_PORT_LS_U2 0x0040 -#define USB_SS_PORT_LS_U3 0x0060 -#define USB_SS_PORT_LS_SS_DISABLED 0x0080 -#define USB_SS_PORT_LS_RX_DETECT 0x00a0 -#define USB_SS_PORT_LS_SS_INACTIVE 0x00c0 -#define USB_SS_PORT_LS_POLLING 0x00e0 -#define USB_SS_PORT_LS_RECOVERY 0x0100 -#define USB_SS_PORT_LS_HOT_RESET 0x0120 -#define USB_SS_PORT_LS_COMP_MOD 0x0140 -#define USB_SS_PORT_LS_LOOPBACK 0x0160 - -/* - * wPortChange bit field - * See USB 2.0 spec Table 11-22 and USB 2.0 LPM ECN Table-4.10 - * Bits 0 to 5 shown, bits 6 to 15 are reserved - */ -#define USB_PORT_STAT_C_CONNECTION 0x0001 -#define USB_PORT_STAT_C_ENABLE 0x0002 -#define USB_PORT_STAT_C_SUSPEND 0x0004 -#define USB_PORT_STAT_C_OVERCURRENT 0x0008 -#define USB_PORT_STAT_C_RESET 0x0010 -#define USB_PORT_STAT_C_L1 0x0020 -/* - * USB 3.0 wPortChange bit fields - * See USB 3.0 spec Table 10-11 - */ -#define USB_PORT_STAT_C_BH_RESET 0x0020 -#define USB_PORT_STAT_C_LINK_STATE 0x0040 -#define USB_PORT_STAT_C_CONFIG_ERROR 0x0080 - -/* - * wHubCharacteristics (masks) - * See USB 2.0 spec Table 11-13, offset 3 - */ -#define HUB_CHAR_LPSM 0x0003 /* Logical Power Switching Mode mask */ -#define HUB_CHAR_COMMON_LPSM 0x0000 /* All ports power control at once */ -#define HUB_CHAR_INDV_PORT_LPSM 0x0001 /* per-port power control */ -#define HUB_CHAR_NO_LPSM 0x0002 /* no power switching */ - -#define HUB_CHAR_COMPOUND 0x0004 /* hub is part of a compound device */ - -#define HUB_CHAR_OCPM 0x0018 /* Over-Current Protection Mode mask */ -#define HUB_CHAR_COMMON_OCPM 0x0000 /* All ports Over-Current reporting */ -#define HUB_CHAR_INDV_PORT_OCPM 0x0008 /* per-port Over-current reporting */ -#define HUB_CHAR_NO_OCPM 0x0010 /* No Over-current Protection support */ - -#define HUB_CHAR_TTTT 0x0060 /* TT Think Time mask */ -#define HUB_CHAR_PORTIND 0x0080 /* per-port indicators (LEDs) */ - -struct usb_hub_status { - __le16 wHubStatus; - __le16 wHubChange; -} __attribute__ ((packed)); - -/* - * Hub Status & Hub Change bit masks - * See USB 2.0 spec Table 11-19 and Table 11-20 - * Bits 0 and 1 for wHubStatus and wHubChange - * Bits 2 to 15 are reserved for both - */ -#define HUB_STATUS_LOCAL_POWER 0x0001 -#define HUB_STATUS_OVERCURRENT 0x0002 -#define HUB_CHANGE_LOCAL_POWER 0x0001 -#define HUB_CHANGE_OVERCURRENT 0x0002 - - -/* - * Hub descriptor - * See USB 2.0 spec Table 11-13 - */ - -#define USB_DT_HUB (USB_TYPE_CLASS | 0x09) -#define USB_DT_SS_HUB (USB_TYPE_CLASS | 0x0a) -#define USB_DT_HUB_NONVAR_SIZE 7 -#define USB_DT_SS_HUB_SIZE 12 - -/* - * Hub Device descriptor - * USB Hub class device protocols - */ - -#define USB_HUB_PR_FS 0 /* Full speed hub */ -#define USB_HUB_PR_HS_NO_TT 0 /* Hi-speed hub without TT */ -#define USB_HUB_PR_HS_SINGLE_TT 1 /* Hi-speed hub with single TT */ -#define USB_HUB_PR_HS_MULTI_TT 2 /* Hi-speed hub with multiple TT */ -#define USB_HUB_PR_SS 3 /* Super speed hub */ - -struct usb_hub_descriptor { - __u8 bDescLength; - __u8 bDescriptorType; - __u8 bNbrPorts; - __le16 wHubCharacteristics; - __u8 bPwrOn2PwrGood; - __u8 bHubContrCurrent; - - /* 2.0 and 3.0 hubs differ here */ - union { - struct { - /* add 1 bit for hub status change; round to bytes */ - __u8 DeviceRemovable[(USB_MAXCHILDREN + 1 + 7) / 8]; - __u8 PortPwrCtrlMask[(USB_MAXCHILDREN + 1 + 7) / 8]; - } __attribute__ ((packed)) hs; - - struct { - __u8 bHubHdrDecLat; - __le16 wHubDelay; - __le16 DeviceRemovable; - } __attribute__ ((packed)) ss; - } u; -} __attribute__ ((packed)); - -/* port indicator status selectors, tables 11-7 and 11-25 */ -#define HUB_LED_AUTO 0 -#define HUB_LED_AMBER 1 -#define HUB_LED_GREEN 2 -#define HUB_LED_OFF 3 - -enum hub_led_mode { - INDICATOR_AUTO = 0, - INDICATOR_CYCLE, - /* software blinks for attention: software, hardware, reserved */ - INDICATOR_GREEN_BLINK, INDICATOR_GREEN_BLINK_OFF, - INDICATOR_AMBER_BLINK, INDICATOR_AMBER_BLINK_OFF, - INDICATOR_ALT_BLINK, INDICATOR_ALT_BLINK_OFF -} __attribute__ ((packed)); - -/* Transaction Translator Think Times, in bits */ -#define HUB_TTTT_8_BITS 0x00 -#define HUB_TTTT_16_BITS 0x20 -#define HUB_TTTT_24_BITS 0x40 -#define HUB_TTTT_32_BITS 0x60 - -#endif /* __LINUX_CH11_H */ diff --git a/include/linux/usb/ch9.h b/include/linux/usb/ch9.h index d1d732c2838d..9c210f2283df 100644 --- a/include/linux/usb/ch9.h +++ b/include/linux/usb/ch9.h @@ -29,887 +29,11 @@ * someone that the two other points are non-issues for that * particular descriptor type. */ - #ifndef __LINUX_USB_CH9_H #define __LINUX_USB_CH9_H -#include /* __u8 etc */ -#include /* le16_to_cpu */ - -/*-------------------------------------------------------------------------*/ - -/* CONTROL REQUEST SUPPORT */ - -/* - * USB directions - * - * This bit flag is used in endpoint descriptors' bEndpointAddress field. - * It's also one of three fields in control requests bRequestType. - */ -#define USB_DIR_OUT 0 /* to device */ -#define USB_DIR_IN 0x80 /* to host */ - -/* - * USB types, the second of three bRequestType fields - */ -#define USB_TYPE_MASK (0x03 << 5) -#define USB_TYPE_STANDARD (0x00 << 5) -#define USB_TYPE_CLASS (0x01 << 5) -#define USB_TYPE_VENDOR (0x02 << 5) -#define USB_TYPE_RESERVED (0x03 << 5) - -/* - * USB recipients, the third of three bRequestType fields - */ -#define USB_RECIP_MASK 0x1f -#define USB_RECIP_DEVICE 0x00 -#define USB_RECIP_INTERFACE 0x01 -#define USB_RECIP_ENDPOINT 0x02 -#define USB_RECIP_OTHER 0x03 -/* From Wireless USB 1.0 */ -#define USB_RECIP_PORT 0x04 -#define USB_RECIP_RPIPE 0x05 - -/* - * Standard requests, for the bRequest field of a SETUP packet. - * - * These are qualified by the bRequestType field, so that for example - * TYPE_CLASS or TYPE_VENDOR specific feature flags could be retrieved - * by a GET_STATUS request. - */ -#define USB_REQ_GET_STATUS 0x00 -#define USB_REQ_CLEAR_FEATURE 0x01 -#define USB_REQ_SET_FEATURE 0x03 -#define USB_REQ_SET_ADDRESS 0x05 -#define USB_REQ_GET_DESCRIPTOR 0x06 -#define USB_REQ_SET_DESCRIPTOR 0x07 -#define USB_REQ_GET_CONFIGURATION 0x08 -#define USB_REQ_SET_CONFIGURATION 0x09 -#define USB_REQ_GET_INTERFACE 0x0A -#define USB_REQ_SET_INTERFACE 0x0B -#define USB_REQ_SYNCH_FRAME 0x0C -#define USB_REQ_SET_SEL 0x30 -#define USB_REQ_SET_ISOCH_DELAY 0x31 - -#define USB_REQ_SET_ENCRYPTION 0x0D /* Wireless USB */ -#define USB_REQ_GET_ENCRYPTION 0x0E -#define USB_REQ_RPIPE_ABORT 0x0E -#define USB_REQ_SET_HANDSHAKE 0x0F -#define USB_REQ_RPIPE_RESET 0x0F -#define USB_REQ_GET_HANDSHAKE 0x10 -#define USB_REQ_SET_CONNECTION 0x11 -#define USB_REQ_SET_SECURITY_DATA 0x12 -#define USB_REQ_GET_SECURITY_DATA 0x13 -#define USB_REQ_SET_WUSB_DATA 0x14 -#define USB_REQ_LOOPBACK_DATA_WRITE 0x15 -#define USB_REQ_LOOPBACK_DATA_READ 0x16 -#define USB_REQ_SET_INTERFACE_DS 0x17 - -/* The Link Power Management (LPM) ECN defines USB_REQ_TEST_AND_SET command, - * used by hubs to put ports into a new L1 suspend state, except that it - * forgot to define its number ... - */ - -/* - * USB feature flags are written using USB_REQ_{CLEAR,SET}_FEATURE, and - * are read as a bit array returned by USB_REQ_GET_STATUS. (So there - * are at most sixteen features of each type.) Hubs may also support a - * new USB_REQ_TEST_AND_SET_FEATURE to put ports into L1 suspend. - */ -#define USB_DEVICE_SELF_POWERED 0 /* (read only) */ -#define USB_DEVICE_REMOTE_WAKEUP 1 /* dev may initiate wakeup */ -#define USB_DEVICE_TEST_MODE 2 /* (wired high speed only) */ -#define USB_DEVICE_BATTERY 2 /* (wireless) */ -#define USB_DEVICE_B_HNP_ENABLE 3 /* (otg) dev may initiate HNP */ -#define USB_DEVICE_WUSB_DEVICE 3 /* (wireless)*/ -#define USB_DEVICE_A_HNP_SUPPORT 4 /* (otg) RH port supports HNP */ -#define USB_DEVICE_A_ALT_HNP_SUPPORT 5 /* (otg) other RH port does */ -#define USB_DEVICE_DEBUG_MODE 6 /* (special devices only) */ - -/* - * Test Mode Selectors - * See USB 2.0 spec Table 9-7 - */ -#define TEST_J 1 -#define TEST_K 2 -#define TEST_SE0_NAK 3 -#define TEST_PACKET 4 -#define TEST_FORCE_EN 5 - -/* - * New Feature Selectors as added by USB 3.0 - * See USB 3.0 spec Table 9-6 - */ -#define USB_DEVICE_U1_ENABLE 48 /* dev may initiate U1 transition */ -#define USB_DEVICE_U2_ENABLE 49 /* dev may initiate U2 transition */ -#define USB_DEVICE_LTM_ENABLE 50 /* dev may send LTM */ -#define USB_INTRF_FUNC_SUSPEND 0 /* function suspend */ - -#define USB_INTR_FUNC_SUSPEND_OPT_MASK 0xFF00 -/* - * Suspend Options, Table 9-7 USB 3.0 spec - */ -#define USB_INTRF_FUNC_SUSPEND_LP (1 << (8 + 0)) -#define USB_INTRF_FUNC_SUSPEND_RW (1 << (8 + 1)) - -#define USB_ENDPOINT_HALT 0 /* IN/OUT will STALL */ - -/* Bit array elements as returned by the USB_REQ_GET_STATUS request. */ -#define USB_DEV_STAT_U1_ENABLED 2 /* transition into U1 state */ -#define USB_DEV_STAT_U2_ENABLED 3 /* transition into U2 state */ -#define USB_DEV_STAT_LTM_ENABLED 4 /* Latency tolerance messages */ - -/** - * struct usb_ctrlrequest - SETUP data for a USB device control request - * @bRequestType: matches the USB bmRequestType field - * @bRequest: matches the USB bRequest field - * @wValue: matches the USB wValue field (le16 byte order) - * @wIndex: matches the USB wIndex field (le16 byte order) - * @wLength: matches the USB wLength field (le16 byte order) - * - * This structure is used to send control requests to a USB device. It matches - * the different fields of the USB 2.0 Spec section 9.3, table 9-2. See the - * USB spec for a fuller description of the different fields, and what they are - * used for. - * - * Note that the driver for any interface can issue control requests. - * For most devices, interfaces don't coordinate with each other, so - * such requests may be made at any time. - */ -struct usb_ctrlrequest { - __u8 bRequestType; - __u8 bRequest; - __le16 wValue; - __le16 wIndex; - __le16 wLength; -} __attribute__ ((packed)); - -/*-------------------------------------------------------------------------*/ - -/* - * STANDARD DESCRIPTORS ... as returned by GET_DESCRIPTOR, or - * (rarely) accepted by SET_DESCRIPTOR. - * - * Note that all multi-byte values here are encoded in little endian - * byte order "on the wire". Within the kernel and when exposed - * through the Linux-USB APIs, they are not converted to cpu byte - * order; it is the responsibility of the client code to do this. - * The single exception is when device and configuration descriptors (but - * not other descriptors) are read from usbfs (i.e. /proc/bus/usb/BBB/DDD); - * in this case the fields are converted to host endianness by the kernel. - */ - -/* - * Descriptor types ... USB 2.0 spec table 9.5 - */ -#define USB_DT_DEVICE 0x01 -#define USB_DT_CONFIG 0x02 -#define USB_DT_STRING 0x03 -#define USB_DT_INTERFACE 0x04 -#define USB_DT_ENDPOINT 0x05 -#define USB_DT_DEVICE_QUALIFIER 0x06 -#define USB_DT_OTHER_SPEED_CONFIG 0x07 -#define USB_DT_INTERFACE_POWER 0x08 -/* these are from a minor usb 2.0 revision (ECN) */ -#define USB_DT_OTG 0x09 -#define USB_DT_DEBUG 0x0a -#define USB_DT_INTERFACE_ASSOCIATION 0x0b -/* these are from the Wireless USB spec */ -#define USB_DT_SECURITY 0x0c -#define USB_DT_KEY 0x0d -#define USB_DT_ENCRYPTION_TYPE 0x0e -#define USB_DT_BOS 0x0f -#define USB_DT_DEVICE_CAPABILITY 0x10 -#define USB_DT_WIRELESS_ENDPOINT_COMP 0x11 -#define USB_DT_WIRE_ADAPTER 0x21 -#define USB_DT_RPIPE 0x22 -#define USB_DT_CS_RADIO_CONTROL 0x23 -/* From the T10 UAS specification */ -#define USB_DT_PIPE_USAGE 0x24 -/* From the USB 3.0 spec */ -#define USB_DT_SS_ENDPOINT_COMP 0x30 - -/* Conventional codes for class-specific descriptors. The convention is - * defined in the USB "Common Class" Spec (3.11). Individual class specs - * are authoritative for their usage, not the "common class" writeup. - */ -#define USB_DT_CS_DEVICE (USB_TYPE_CLASS | USB_DT_DEVICE) -#define USB_DT_CS_CONFIG (USB_TYPE_CLASS | USB_DT_CONFIG) -#define USB_DT_CS_STRING (USB_TYPE_CLASS | USB_DT_STRING) -#define USB_DT_CS_INTERFACE (USB_TYPE_CLASS | USB_DT_INTERFACE) -#define USB_DT_CS_ENDPOINT (USB_TYPE_CLASS | USB_DT_ENDPOINT) - -/* All standard descriptors have these 2 fields at the beginning */ -struct usb_descriptor_header { - __u8 bLength; - __u8 bDescriptorType; -} __attribute__ ((packed)); - - -/*-------------------------------------------------------------------------*/ - -/* USB_DT_DEVICE: Device descriptor */ -struct usb_device_descriptor { - __u8 bLength; - __u8 bDescriptorType; - - __le16 bcdUSB; - __u8 bDeviceClass; - __u8 bDeviceSubClass; - __u8 bDeviceProtocol; - __u8 bMaxPacketSize0; - __le16 idVendor; - __le16 idProduct; - __le16 bcdDevice; - __u8 iManufacturer; - __u8 iProduct; - __u8 iSerialNumber; - __u8 bNumConfigurations; -} __attribute__ ((packed)); - -#define USB_DT_DEVICE_SIZE 18 - - -/* - * Device and/or Interface Class codes - * as found in bDeviceClass or bInterfaceClass - * and defined by www.usb.org documents - */ -#define USB_CLASS_PER_INTERFACE 0 /* for DeviceClass */ -#define USB_CLASS_AUDIO 1 -#define USB_CLASS_COMM 2 -#define USB_CLASS_HID 3 -#define USB_CLASS_PHYSICAL 5 -#define USB_CLASS_STILL_IMAGE 6 -#define USB_CLASS_PRINTER 7 -#define USB_CLASS_MASS_STORAGE 8 -#define USB_CLASS_HUB 9 -#define USB_CLASS_CDC_DATA 0x0a -#define USB_CLASS_CSCID 0x0b /* chip+ smart card */ -#define USB_CLASS_CONTENT_SEC 0x0d /* content security */ -#define USB_CLASS_VIDEO 0x0e -#define USB_CLASS_WIRELESS_CONTROLLER 0xe0 -#define USB_CLASS_MISC 0xef -#define USB_CLASS_APP_SPEC 0xfe -#define USB_CLASS_VENDOR_SPEC 0xff - -#define USB_SUBCLASS_VENDOR_SPEC 0xff - -/*-------------------------------------------------------------------------*/ - -/* USB_DT_CONFIG: Configuration descriptor information. - * - * USB_DT_OTHER_SPEED_CONFIG is the same descriptor, except that the - * descriptor type is different. Highspeed-capable devices can look - * different depending on what speed they're currently running. Only - * devices with a USB_DT_DEVICE_QUALIFIER have any OTHER_SPEED_CONFIG - * descriptors. - */ -struct usb_config_descriptor { - __u8 bLength; - __u8 bDescriptorType; - - __le16 wTotalLength; - __u8 bNumInterfaces; - __u8 bConfigurationValue; - __u8 iConfiguration; - __u8 bmAttributes; - __u8 bMaxPower; -} __attribute__ ((packed)); - -#define USB_DT_CONFIG_SIZE 9 - -/* from config descriptor bmAttributes */ -#define USB_CONFIG_ATT_ONE (1 << 7) /* must be set */ -#define USB_CONFIG_ATT_SELFPOWER (1 << 6) /* self powered */ -#define USB_CONFIG_ATT_WAKEUP (1 << 5) /* can wakeup */ -#define USB_CONFIG_ATT_BATTERY (1 << 4) /* battery powered */ - -/*-------------------------------------------------------------------------*/ - -/* USB_DT_STRING: String descriptor */ -struct usb_string_descriptor { - __u8 bLength; - __u8 bDescriptorType; - - __le16 wData[1]; /* UTF-16LE encoded */ -} __attribute__ ((packed)); - -/* note that "string" zero is special, it holds language codes that - * the device supports, not Unicode characters. - */ - -/*-------------------------------------------------------------------------*/ - -/* USB_DT_INTERFACE: Interface descriptor */ -struct usb_interface_descriptor { - __u8 bLength; - __u8 bDescriptorType; - - __u8 bInterfaceNumber; - __u8 bAlternateSetting; - __u8 bNumEndpoints; - __u8 bInterfaceClass; - __u8 bInterfaceSubClass; - __u8 bInterfaceProtocol; - __u8 iInterface; -} __attribute__ ((packed)); - -#define USB_DT_INTERFACE_SIZE 9 - -/*-------------------------------------------------------------------------*/ - -/* USB_DT_ENDPOINT: Endpoint descriptor */ -struct usb_endpoint_descriptor { - __u8 bLength; - __u8 bDescriptorType; - - __u8 bEndpointAddress; - __u8 bmAttributes; - __le16 wMaxPacketSize; - __u8 bInterval; - - /* NOTE: these two are _only_ in audio endpoints. */ - /* use USB_DT_ENDPOINT*_SIZE in bLength, not sizeof. */ - __u8 bRefresh; - __u8 bSynchAddress; -} __attribute__ ((packed)); - -#define USB_DT_ENDPOINT_SIZE 7 -#define USB_DT_ENDPOINT_AUDIO_SIZE 9 /* Audio extension */ - - -/* - * Endpoints - */ -#define USB_ENDPOINT_NUMBER_MASK 0x0f /* in bEndpointAddress */ -#define USB_ENDPOINT_DIR_MASK 0x80 - -#define USB_ENDPOINT_XFERTYPE_MASK 0x03 /* in bmAttributes */ -#define USB_ENDPOINT_XFER_CONTROL 0 -#define USB_ENDPOINT_XFER_ISOC 1 -#define USB_ENDPOINT_XFER_BULK 2 -#define USB_ENDPOINT_XFER_INT 3 -#define USB_ENDPOINT_MAX_ADJUSTABLE 0x80 - -/* The USB 3.0 spec redefines bits 5:4 of bmAttributes as interrupt ep type. */ -#define USB_ENDPOINT_INTRTYPE 0x30 -#define USB_ENDPOINT_INTR_PERIODIC (0 << 4) -#define USB_ENDPOINT_INTR_NOTIFICATION (1 << 4) - -#define USB_ENDPOINT_SYNCTYPE 0x0c -#define USB_ENDPOINT_SYNC_NONE (0 << 2) -#define USB_ENDPOINT_SYNC_ASYNC (1 << 2) -#define USB_ENDPOINT_SYNC_ADAPTIVE (2 << 2) -#define USB_ENDPOINT_SYNC_SYNC (3 << 2) - -#define USB_ENDPOINT_USAGE_MASK 0x30 -#define USB_ENDPOINT_USAGE_DATA 0x00 -#define USB_ENDPOINT_USAGE_FEEDBACK 0x10 -#define USB_ENDPOINT_USAGE_IMPLICIT_FB 0x20 /* Implicit feedback Data endpoint */ - -/*-------------------------------------------------------------------------*/ - -/** - * usb_endpoint_num - get the endpoint's number - * @epd: endpoint to be checked - * - * Returns @epd's number: 0 to 15. - */ -static inline int usb_endpoint_num(const struct usb_endpoint_descriptor *epd) -{ - return epd->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK; -} - -/** - * usb_endpoint_type - get the endpoint's transfer type - * @epd: endpoint to be checked - * - * Returns one of USB_ENDPOINT_XFER_{CONTROL, ISOC, BULK, INT} according - * to @epd's transfer type. - */ -static inline int usb_endpoint_type(const struct usb_endpoint_descriptor *epd) -{ - return epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK; -} - -/** - * usb_endpoint_dir_in - check if the endpoint has IN direction - * @epd: endpoint to be checked - * - * Returns true if the endpoint is of type IN, otherwise it returns false. - */ -static inline int usb_endpoint_dir_in(const struct usb_endpoint_descriptor *epd) -{ - return ((epd->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN); -} - -/** - * usb_endpoint_dir_out - check if the endpoint has OUT direction - * @epd: endpoint to be checked - * - * Returns true if the endpoint is of type OUT, otherwise it returns false. - */ -static inline int usb_endpoint_dir_out( - const struct usb_endpoint_descriptor *epd) -{ - return ((epd->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT); -} - -/** - * usb_endpoint_xfer_bulk - check if the endpoint has bulk transfer type - * @epd: endpoint to be checked - * - * Returns true if the endpoint is of type bulk, otherwise it returns false. - */ -static inline int usb_endpoint_xfer_bulk( - const struct usb_endpoint_descriptor *epd) -{ - return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == - USB_ENDPOINT_XFER_BULK); -} - -/** - * usb_endpoint_xfer_control - check if the endpoint has control transfer type - * @epd: endpoint to be checked - * - * Returns true if the endpoint is of type control, otherwise it returns false. - */ -static inline int usb_endpoint_xfer_control( - const struct usb_endpoint_descriptor *epd) -{ - return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == - USB_ENDPOINT_XFER_CONTROL); -} - -/** - * usb_endpoint_xfer_int - check if the endpoint has interrupt transfer type - * @epd: endpoint to be checked - * - * Returns true if the endpoint is of type interrupt, otherwise it returns - * false. - */ -static inline int usb_endpoint_xfer_int( - const struct usb_endpoint_descriptor *epd) -{ - return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == - USB_ENDPOINT_XFER_INT); -} - -/** - * usb_endpoint_xfer_isoc - check if the endpoint has isochronous transfer type - * @epd: endpoint to be checked - * - * Returns true if the endpoint is of type isochronous, otherwise it returns - * false. - */ -static inline int usb_endpoint_xfer_isoc( - const struct usb_endpoint_descriptor *epd) -{ - return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == - USB_ENDPOINT_XFER_ISOC); -} - -/** - * usb_endpoint_is_bulk_in - check if the endpoint is bulk IN - * @epd: endpoint to be checked - * - * Returns true if the endpoint has bulk transfer type and IN direction, - * otherwise it returns false. - */ -static inline int usb_endpoint_is_bulk_in( - const struct usb_endpoint_descriptor *epd) -{ - return usb_endpoint_xfer_bulk(epd) && usb_endpoint_dir_in(epd); -} - -/** - * usb_endpoint_is_bulk_out - check if the endpoint is bulk OUT - * @epd: endpoint to be checked - * - * Returns true if the endpoint has bulk transfer type and OUT direction, - * otherwise it returns false. - */ -static inline int usb_endpoint_is_bulk_out( - const struct usb_endpoint_descriptor *epd) -{ - return usb_endpoint_xfer_bulk(epd) && usb_endpoint_dir_out(epd); -} - -/** - * usb_endpoint_is_int_in - check if the endpoint is interrupt IN - * @epd: endpoint to be checked - * - * Returns true if the endpoint has interrupt transfer type and IN direction, - * otherwise it returns false. - */ -static inline int usb_endpoint_is_int_in( - const struct usb_endpoint_descriptor *epd) -{ - return usb_endpoint_xfer_int(epd) && usb_endpoint_dir_in(epd); -} - -/** - * usb_endpoint_is_int_out - check if the endpoint is interrupt OUT - * @epd: endpoint to be checked - * - * Returns true if the endpoint has interrupt transfer type and OUT direction, - * otherwise it returns false. - */ -static inline int usb_endpoint_is_int_out( - const struct usb_endpoint_descriptor *epd) -{ - return usb_endpoint_xfer_int(epd) && usb_endpoint_dir_out(epd); -} - -/** - * usb_endpoint_is_isoc_in - check if the endpoint is isochronous IN - * @epd: endpoint to be checked - * - * Returns true if the endpoint has isochronous transfer type and IN direction, - * otherwise it returns false. - */ -static inline int usb_endpoint_is_isoc_in( - const struct usb_endpoint_descriptor *epd) -{ - return usb_endpoint_xfer_isoc(epd) && usb_endpoint_dir_in(epd); -} - -/** - * usb_endpoint_is_isoc_out - check if the endpoint is isochronous OUT - * @epd: endpoint to be checked - * - * Returns true if the endpoint has isochronous transfer type and OUT direction, - * otherwise it returns false. - */ -static inline int usb_endpoint_is_isoc_out( - const struct usb_endpoint_descriptor *epd) -{ - return usb_endpoint_xfer_isoc(epd) && usb_endpoint_dir_out(epd); -} - -/** - * usb_endpoint_maxp - get endpoint's max packet size - * @epd: endpoint to be checked - * - * Returns @epd's max packet - */ -static inline int usb_endpoint_maxp(const struct usb_endpoint_descriptor *epd) -{ - return __le16_to_cpu(epd->wMaxPacketSize); -} - -static inline int usb_endpoint_interrupt_type( - const struct usb_endpoint_descriptor *epd) -{ - return epd->bmAttributes & USB_ENDPOINT_INTRTYPE; -} - -/*-------------------------------------------------------------------------*/ - -/* USB_DT_SS_ENDPOINT_COMP: SuperSpeed Endpoint Companion descriptor */ -struct usb_ss_ep_comp_descriptor { - __u8 bLength; - __u8 bDescriptorType; - - __u8 bMaxBurst; - __u8 bmAttributes; - __le16 wBytesPerInterval; -} __attribute__ ((packed)); - -#define USB_DT_SS_EP_COMP_SIZE 6 - -/* Bits 4:0 of bmAttributes if this is a bulk endpoint */ -static inline int -usb_ss_max_streams(const struct usb_ss_ep_comp_descriptor *comp) -{ - int max_streams; - - if (!comp) - return 0; - - max_streams = comp->bmAttributes & 0x1f; - - if (!max_streams) - return 0; - - max_streams = 1 << max_streams; - - return max_streams; -} - -/* Bits 1:0 of bmAttributes if this is an isoc endpoint */ -#define USB_SS_MULT(p) (1 + ((p) & 0x3)) - -/*-------------------------------------------------------------------------*/ - -/* USB_DT_DEVICE_QUALIFIER: Device Qualifier descriptor */ -struct usb_qualifier_descriptor { - __u8 bLength; - __u8 bDescriptorType; - - __le16 bcdUSB; - __u8 bDeviceClass; - __u8 bDeviceSubClass; - __u8 bDeviceProtocol; - __u8 bMaxPacketSize0; - __u8 bNumConfigurations; - __u8 bRESERVED; -} __attribute__ ((packed)); - - -/*-------------------------------------------------------------------------*/ - -/* USB_DT_OTG (from OTG 1.0a supplement) */ -struct usb_otg_descriptor { - __u8 bLength; - __u8 bDescriptorType; - - __u8 bmAttributes; /* support for HNP, SRP, etc */ -} __attribute__ ((packed)); - -/* from usb_otg_descriptor.bmAttributes */ -#define USB_OTG_SRP (1 << 0) -#define USB_OTG_HNP (1 << 1) /* swap host/device roles */ - -/*-------------------------------------------------------------------------*/ - -/* USB_DT_DEBUG: for special highspeed devices, replacing serial console */ -struct usb_debug_descriptor { - __u8 bLength; - __u8 bDescriptorType; - - /* bulk endpoints with 8 byte maxpacket */ - __u8 bDebugInEndpoint; - __u8 bDebugOutEndpoint; -} __attribute__((packed)); - -/*-------------------------------------------------------------------------*/ - -/* USB_DT_INTERFACE_ASSOCIATION: groups interfaces */ -struct usb_interface_assoc_descriptor { - __u8 bLength; - __u8 bDescriptorType; - - __u8 bFirstInterface; - __u8 bInterfaceCount; - __u8 bFunctionClass; - __u8 bFunctionSubClass; - __u8 bFunctionProtocol; - __u8 iFunction; -} __attribute__ ((packed)); - - -/*-------------------------------------------------------------------------*/ - -/* USB_DT_SECURITY: group of wireless security descriptors, including - * encryption types available for setting up a CC/association. - */ -struct usb_security_descriptor { - __u8 bLength; - __u8 bDescriptorType; - - __le16 wTotalLength; - __u8 bNumEncryptionTypes; -} __attribute__((packed)); - -/*-------------------------------------------------------------------------*/ - -/* USB_DT_KEY: used with {GET,SET}_SECURITY_DATA; only public keys - * may be retrieved. - */ -struct usb_key_descriptor { - __u8 bLength; - __u8 bDescriptorType; - - __u8 tTKID[3]; - __u8 bReserved; - __u8 bKeyData[0]; -} __attribute__((packed)); - -/*-------------------------------------------------------------------------*/ - -/* USB_DT_ENCRYPTION_TYPE: bundled in DT_SECURITY groups */ -struct usb_encryption_descriptor { - __u8 bLength; - __u8 bDescriptorType; - - __u8 bEncryptionType; -#define USB_ENC_TYPE_UNSECURE 0 -#define USB_ENC_TYPE_WIRED 1 /* non-wireless mode */ -#define USB_ENC_TYPE_CCM_1 2 /* aes128/cbc session */ -#define USB_ENC_TYPE_RSA_1 3 /* rsa3072/sha1 auth */ - __u8 bEncryptionValue; /* use in SET_ENCRYPTION */ - __u8 bAuthKeyIndex; -} __attribute__((packed)); - - -/*-------------------------------------------------------------------------*/ - -/* USB_DT_BOS: group of device-level capabilities */ -struct usb_bos_descriptor { - __u8 bLength; - __u8 bDescriptorType; - - __le16 wTotalLength; - __u8 bNumDeviceCaps; -} __attribute__((packed)); - -#define USB_DT_BOS_SIZE 5 -/*-------------------------------------------------------------------------*/ - -/* USB_DT_DEVICE_CAPABILITY: grouped with BOS */ -struct usb_dev_cap_header { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDevCapabilityType; -} __attribute__((packed)); - -#define USB_CAP_TYPE_WIRELESS_USB 1 - -struct usb_wireless_cap_descriptor { /* Ultra Wide Band */ - __u8 bLength; - __u8 bDescriptorType; - __u8 bDevCapabilityType; - - __u8 bmAttributes; -#define USB_WIRELESS_P2P_DRD (1 << 1) -#define USB_WIRELESS_BEACON_MASK (3 << 2) -#define USB_WIRELESS_BEACON_SELF (1 << 2) -#define USB_WIRELESS_BEACON_DIRECTED (2 << 2) -#define USB_WIRELESS_BEACON_NONE (3 << 2) - __le16 wPHYRates; /* bit rates, Mbps */ -#define USB_WIRELESS_PHY_53 (1 << 0) /* always set */ -#define USB_WIRELESS_PHY_80 (1 << 1) -#define USB_WIRELESS_PHY_107 (1 << 2) /* always set */ -#define USB_WIRELESS_PHY_160 (1 << 3) -#define USB_WIRELESS_PHY_200 (1 << 4) /* always set */ -#define USB_WIRELESS_PHY_320 (1 << 5) -#define USB_WIRELESS_PHY_400 (1 << 6) -#define USB_WIRELESS_PHY_480 (1 << 7) - __u8 bmTFITXPowerInfo; /* TFI power levels */ - __u8 bmFFITXPowerInfo; /* FFI power levels */ - __le16 bmBandGroup; - __u8 bReserved; -} __attribute__((packed)); - -/* USB 2.0 Extension descriptor */ -#define USB_CAP_TYPE_EXT 2 - -struct usb_ext_cap_descriptor { /* Link Power Management */ - __u8 bLength; - __u8 bDescriptorType; - __u8 bDevCapabilityType; - __le32 bmAttributes; -#define USB_LPM_SUPPORT (1 << 1) /* supports LPM */ -#define USB_BESL_SUPPORT (1 << 2) /* supports BESL */ -#define USB_BESL_BASELINE_VALID (1 << 3) /* Baseline BESL valid*/ -#define USB_BESL_DEEP_VALID (1 << 4) /* Deep BESL valid */ -#define USB_GET_BESL_BASELINE(p) (((p) & (0xf << 8)) >> 8) -#define USB_GET_BESL_DEEP(p) (((p) & (0xf << 12)) >> 12) -} __attribute__((packed)); - -#define USB_DT_USB_EXT_CAP_SIZE 7 - -/* - * SuperSpeed USB Capability descriptor: Defines the set of SuperSpeed USB - * specific device level capabilities - */ -#define USB_SS_CAP_TYPE 3 -struct usb_ss_cap_descriptor { /* Link Power Management */ - __u8 bLength; - __u8 bDescriptorType; - __u8 bDevCapabilityType; - __u8 bmAttributes; -#define USB_LTM_SUPPORT (1 << 1) /* supports LTM */ - __le16 wSpeedSupported; -#define USB_LOW_SPEED_OPERATION (1) /* Low speed operation */ -#define USB_FULL_SPEED_OPERATION (1 << 1) /* Full speed operation */ -#define USB_HIGH_SPEED_OPERATION (1 << 2) /* High speed operation */ -#define USB_5GBPS_OPERATION (1 << 3) /* Operation at 5Gbps */ - __u8 bFunctionalitySupport; - __u8 bU1devExitLat; - __le16 bU2DevExitLat; -} __attribute__((packed)); - -#define USB_DT_USB_SS_CAP_SIZE 10 - -/* - * Container ID Capability descriptor: Defines the instance unique ID used to - * identify the instance across all operating modes - */ -#define CONTAINER_ID_TYPE 4 -struct usb_ss_container_id_descriptor { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDevCapabilityType; - __u8 bReserved; - __u8 ContainerID[16]; /* 128-bit number */ -} __attribute__((packed)); - -#define USB_DT_USB_SS_CONTN_ID_SIZE 20 -/*-------------------------------------------------------------------------*/ - -/* USB_DT_WIRELESS_ENDPOINT_COMP: companion descriptor associated with - * each endpoint descriptor for a wireless device - */ -struct usb_wireless_ep_comp_descriptor { - __u8 bLength; - __u8 bDescriptorType; - - __u8 bMaxBurst; - __u8 bMaxSequence; - __le16 wMaxStreamDelay; - __le16 wOverTheAirPacketSize; - __u8 bOverTheAirInterval; - __u8 bmCompAttributes; -#define USB_ENDPOINT_SWITCH_MASK 0x03 /* in bmCompAttributes */ -#define USB_ENDPOINT_SWITCH_NO 0 -#define USB_ENDPOINT_SWITCH_SWITCH 1 -#define USB_ENDPOINT_SWITCH_SCALE 2 -} __attribute__((packed)); - -/*-------------------------------------------------------------------------*/ - -/* USB_REQ_SET_HANDSHAKE is a four-way handshake used between a wireless - * host and a device for connection set up, mutual authentication, and - * exchanging short lived session keys. The handshake depends on a CC. - */ -struct usb_handshake { - __u8 bMessageNumber; - __u8 bStatus; - __u8 tTKID[3]; - __u8 bReserved; - __u8 CDID[16]; - __u8 nonce[16]; - __u8 MIC[8]; -} __attribute__((packed)); - -/*-------------------------------------------------------------------------*/ - -/* USB_REQ_SET_CONNECTION modifies or revokes a connection context (CC). - * A CC may also be set up using non-wireless secure channels (including - * wired USB!), and some devices may support CCs with multiple hosts. - */ -struct usb_connection_context { - __u8 CHID[16]; /* persistent host id */ - __u8 CDID[16]; /* device id (unique w/in host context) */ - __u8 CK[16]; /* connection key */ -} __attribute__((packed)); - -/*-------------------------------------------------------------------------*/ +#include -/* USB 2.0 defines three speeds, here's how Linux identifies them */ - -enum usb_device_speed { - USB_SPEED_UNKNOWN = 0, /* enumerating */ - USB_SPEED_LOW, USB_SPEED_FULL, /* usb 1.1 */ - USB_SPEED_HIGH, /* usb 2.0 */ - USB_SPEED_WIRELESS, /* wireless (usb 2.5) */ - USB_SPEED_SUPER, /* usb 3.0 */ -}; - -#ifdef __KERNEL__ /** * usb_speed_string() - Returns human readable-name of the speed. @@ -919,86 +43,4 @@ enum usb_device_speed { */ extern const char *usb_speed_string(enum usb_device_speed speed); -#endif - -enum usb_device_state { - /* NOTATTACHED isn't in the USB spec, and this state acts - * the same as ATTACHED ... but it's clearer this way. - */ - USB_STATE_NOTATTACHED = 0, - - /* chapter 9 and authentication (wireless) device states */ - USB_STATE_ATTACHED, - USB_STATE_POWERED, /* wired */ - USB_STATE_RECONNECTING, /* auth */ - USB_STATE_UNAUTHENTICATED, /* auth */ - USB_STATE_DEFAULT, /* limited function */ - USB_STATE_ADDRESS, - USB_STATE_CONFIGURED, /* most functions */ - - USB_STATE_SUSPENDED - - /* NOTE: there are actually four different SUSPENDED - * states, returning to POWERED, DEFAULT, ADDRESS, or - * CONFIGURED respectively when SOF tokens flow again. - * At this level there's no difference between L1 and L2 - * suspend states. (L2 being original USB 1.1 suspend.) - */ -}; - -enum usb3_link_state { - USB3_LPM_U0 = 0, - USB3_LPM_U1, - USB3_LPM_U2, - USB3_LPM_U3 -}; - -/* - * A U1 timeout of 0x0 means the parent hub will reject any transitions to U1. - * 0xff means the parent hub will accept transitions to U1, but will not - * initiate a transition. - * - * A U1 timeout of 0x1 to 0x7F also causes the hub to initiate a transition to - * U1 after that many microseconds. Timeouts of 0x80 to 0xFE are reserved - * values. - * - * A U2 timeout of 0x0 means the parent hub will reject any transitions to U2. - * 0xff means the parent hub will accept transitions to U2, but will not - * initiate a transition. - * - * A U2 timeout of 0x1 to 0xFE also causes the hub to initiate a transition to - * U2 after N*256 microseconds. Therefore a U2 timeout value of 0x1 means a U2 - * idle timer of 256 microseconds, 0x2 means 512 microseconds, 0xFE means - * 65.024ms. - */ -#define USB3_LPM_DISABLED 0x0 -#define USB3_LPM_U1_MAX_TIMEOUT 0x7F -#define USB3_LPM_U2_MAX_TIMEOUT 0xFE -#define USB3_LPM_DEVICE_INITIATED 0xFF - -struct usb_set_sel_req { - __u8 u1_sel; - __u8 u1_pel; - __le16 u2_sel; - __le16 u2_pel; -} __attribute__ ((packed)); - -/* - * The Set System Exit Latency control transfer provides one byte each for - * U1 SEL and U1 PEL, so the max exit latency is 0xFF. U2 SEL and U2 PEL each - * are two bytes long. - */ -#define USB3_LPM_MAX_U1_SEL_PEL 0xFF -#define USB3_LPM_MAX_U2_SEL_PEL 0xFFFF - -/*-------------------------------------------------------------------------*/ - -/* - * As per USB compliance update, a device that is actively drawing - * more than 100mA from USB must report itself as bus-powered in - * the GetStatus(DEVICE) call. - * http://compliance.usb.org/index.asp?UpdateFile=Electrical&Format=Standard#34 - */ -#define USB_SELF_POWER_VBUS_MAX_DRAW 100 - #endif /* __LINUX_USB_CH9_H */ diff --git a/include/linux/usb/functionfs.h b/include/linux/usb/functionfs.h index a843d0851364..65d0a88dbc67 100644 --- a/include/linux/usb/functionfs.h +++ b/include/linux/usb/functionfs.h @@ -1,171 +1,8 @@ #ifndef __LINUX_FUNCTIONFS_H__ #define __LINUX_FUNCTIONFS_H__ 1 +#include -#include -#include - -#include - - -enum { - FUNCTIONFS_DESCRIPTORS_MAGIC = 1, - FUNCTIONFS_STRINGS_MAGIC = 2 -}; - - -#ifndef __KERNEL__ - -/* Descriptor of an non-audio endpoint */ -struct usb_endpoint_descriptor_no_audio { - __u8 bLength; - __u8 bDescriptorType; - - __u8 bEndpointAddress; - __u8 bmAttributes; - __le16 wMaxPacketSize; - __u8 bInterval; -} __attribute__((packed)); - - -/* - * All numbers must be in little endian order. - */ - -struct usb_functionfs_descs_head { - __le32 magic; - __le32 length; - __le32 fs_count; - __le32 hs_count; -} __attribute__((packed)); - -/* - * Descriptors format: - * - * | off | name | type | description | - * |-----+-----------+--------------+--------------------------------------| - * | 0 | magic | LE32 | FUNCTIONFS_{FS,HS}_DESCRIPTORS_MAGIC | - * | 4 | length | LE32 | length of the whole data chunk | - * | 8 | fs_count | LE32 | number of full-speed descriptors | - * | 12 | hs_count | LE32 | number of high-speed descriptors | - * | 16 | fs_descrs | Descriptor[] | list of full-speed descriptors | - * | | hs_descrs | Descriptor[] | list of high-speed descriptors | - * - * descs are just valid USB descriptors and have the following format: - * - * | off | name | type | description | - * |-----+-----------------+------+--------------------------| - * | 0 | bLength | U8 | length of the descriptor | - * | 1 | bDescriptorType | U8 | descriptor type | - * | 2 | payload | | descriptor's payload | - */ - -struct usb_functionfs_strings_head { - __le32 magic; - __le32 length; - __le32 str_count; - __le32 lang_count; -} __attribute__((packed)); - -/* - * Strings format: - * - * | off | name | type | description | - * |-----+------------+-----------------------+----------------------------| - * | 0 | magic | LE32 | FUNCTIONFS_STRINGS_MAGIC | - * | 4 | length | LE32 | length of the data chunk | - * | 8 | str_count | LE32 | number of strings | - * | 12 | lang_count | LE32 | number of languages | - * | 16 | stringtab | StringTab[lang_count] | table of strings per lang | - * - * For each language there is one stringtab entry (ie. there are lang_count - * stringtab entires). Each StringTab has following format: - * - * | off | name | type | description | - * |-----+---------+-------------------+------------------------------------| - * | 0 | lang | LE16 | language code | - * | 2 | strings | String[str_count] | array of strings in given language | - * - * For each string there is one strings entry (ie. there are str_count - * string entries). Each String is a NUL terminated string encoded in - * UTF-8. - */ - -#endif - - -/* - * Events are delivered on the ep0 file descriptor, when the user mode driver - * reads from this file descriptor after writing the descriptors. Don't - * stop polling this descriptor. - */ - -enum usb_functionfs_event_type { - FUNCTIONFS_BIND, - FUNCTIONFS_UNBIND, - - FUNCTIONFS_ENABLE, - FUNCTIONFS_DISABLE, - - FUNCTIONFS_SETUP, - - FUNCTIONFS_SUSPEND, - FUNCTIONFS_RESUME -}; - -/* NOTE: this structure must stay the same size and layout on - * both 32-bit and 64-bit kernels. - */ -struct usb_functionfs_event { - union { - /* SETUP: packet; DATA phase i/o precedes next event - *(setup.bmRequestType & USB_DIR_IN) flags direction */ - struct usb_ctrlrequest setup; - } __attribute__((packed)) u; - - /* enum usb_functionfs_event_type */ - __u8 type; - __u8 _pad[3]; -} __attribute__((packed)); - - -/* Endpoint ioctls */ -/* The same as in gadgetfs */ - -/* IN transfers may be reported to the gadget driver as complete - * when the fifo is loaded, before the host reads the data; - * OUT transfers may be reported to the host's "client" driver as - * complete when they're sitting in the FIFO unread. - * THIS returns how many bytes are "unclaimed" in the endpoint fifo - * (needed for precise fault handling, when the hardware allows it) - */ -#define FUNCTIONFS_FIFO_STATUS _IO('g', 1) - -/* discards any unclaimed data in the fifo. */ -#define FUNCTIONFS_FIFO_FLUSH _IO('g', 2) - -/* resets endpoint halt+toggle; used to implement set_interface. - * some hardware (like pxa2xx) can't support this. - */ -#define FUNCTIONFS_CLEAR_HALT _IO('g', 3) - -/* Specific for functionfs */ - -/* - * Returns reverse mapping of an interface. Called on EP0. If there - * is no such interface returns -EDOM. If function is not active - * returns -ENODEV. - */ -#define FUNCTIONFS_INTERFACE_REVMAP _IO('g', 128) - -/* - * Returns real bEndpointAddress of an endpoint. If function is not - * active returns -ENODEV. - */ -#define FUNCTIONFS_ENDPOINT_REVMAP _IO('g', 129) - - -#ifdef __KERNEL__ struct ffs_data; struct usb_composite_dev; @@ -197,5 +34,3 @@ static void functionfs_release_dev_callback(struct ffs_data *ffs_data) #endif - -#endif diff --git a/include/linux/usb/g_printer.h b/include/linux/usb/g_printer.h deleted file mode 100644 index 6178fde50f74..000000000000 --- a/include/linux/usb/g_printer.h +++ /dev/null @@ -1,35 +0,0 @@ -/* - * g_printer.h -- Header file for USB Printer gadget driver - * - * Copyright (C) 2007 Craig W. Nadler - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef __LINUX_USB_G_PRINTER_H -#define __LINUX_USB_G_PRINTER_H - -#define PRINTER_NOT_ERROR 0x08 -#define PRINTER_SELECTED 0x10 -#define PRINTER_PAPER_EMPTY 0x20 - -/* The 'g' code is also used by gadgetfs ioctl requests. - * Don't add any colliding codes to either driver, and keep - * them in unique ranges (size 0x20 for now). - */ -#define GADGET_GET_PRINTER_STATUS _IOR('g', 0x21, unsigned char) -#define GADGET_SET_PRINTER_STATUS _IOWR('g', 0x22, unsigned char) - -#endif /* __LINUX_USB_G_PRINTER_H */ diff --git a/include/linux/usb/gadgetfs.h b/include/linux/usb/gadgetfs.h deleted file mode 100644 index 0bb12e0d4f8f..000000000000 --- a/include/linux/usb/gadgetfs.h +++ /dev/null @@ -1,88 +0,0 @@ -/* - * Filesystem based user-mode API to USB Gadget controller hardware - * - * Other than ep0 operations, most things are done by read() and write() - * on endpoint files found in one directory. They are configured by - * writing descriptors, and then may be used for normal stream style - * i/o requests. When ep0 is configured, the device can enumerate; - * when it's closed, the device disconnects from usb. Operations on - * ep0 require ioctl() operations. - * - * Configuration and device descriptors get written to /dev/gadget/$CHIP, - * which may then be used to read usb_gadgetfs_event structs. The driver - * may activate endpoints as it handles SET_CONFIGURATION setup events, - * or earlier; writing endpoint descriptors to /dev/gadget/$ENDPOINT - * then performing data transfers by reading or writing. - */ - -#ifndef __LINUX_USB_GADGETFS_H -#define __LINUX_USB_GADGETFS_H - -#include -#include - -#include - -/* - * Events are delivered on the ep0 file descriptor, when the user mode driver - * reads from this file descriptor after writing the descriptors. Don't - * stop polling this descriptor. - */ - -enum usb_gadgetfs_event_type { - GADGETFS_NOP = 0, - - GADGETFS_CONNECT, - GADGETFS_DISCONNECT, - GADGETFS_SETUP, - GADGETFS_SUSPEND, - /* and likely more ! */ -}; - -/* NOTE: this structure must stay the same size and layout on - * both 32-bit and 64-bit kernels. - */ -struct usb_gadgetfs_event { - union { - /* NOP, DISCONNECT, SUSPEND: nothing - * ... some hardware can't report disconnection - */ - - /* CONNECT: just the speed */ - enum usb_device_speed speed; - - /* SETUP: packet; DATA phase i/o precedes next event - *(setup.bmRequestType & USB_DIR_IN) flags direction - * ... includes SET_CONFIGURATION, SET_INTERFACE - */ - struct usb_ctrlrequest setup; - } u; - enum usb_gadgetfs_event_type type; -}; - - -/* The 'g' code is also used by printer gadget ioctl requests. - * Don't add any colliding codes to either driver, and keep - * them in unique ranges (size 0x20 for now). - */ - -/* endpoint ioctls */ - -/* IN transfers may be reported to the gadget driver as complete - * when the fifo is loaded, before the host reads the data; - * OUT transfers may be reported to the host's "client" driver as - * complete when they're sitting in the FIFO unread. - * THIS returns how many bytes are "unclaimed" in the endpoint fifo - * (needed for precise fault handling, when the hardware allows it) - */ -#define GADGETFS_FIFO_STATUS _IO('g', 1) - -/* discards any unclaimed data in the fifo. */ -#define GADGETFS_FIFO_FLUSH _IO('g', 2) - -/* resets endpoint halt+toggle; used to implement set_interface. - * some hardware (like pxa2xx) can't support this. - */ -#define GADGETFS_CLEAR_HALT _IO('g', 3) - -#endif /* __LINUX_USB_GADGETFS_H */ diff --git a/include/linux/usb/midi.h b/include/linux/usb/midi.h deleted file mode 100644 index c8c52e3c91de..000000000000 --- a/include/linux/usb/midi.h +++ /dev/null @@ -1,112 +0,0 @@ -/* - * -- USB MIDI definitions. - * - * Copyright (C) 2006 Thumtronics Pty Ltd. - * Developed for Thumtronics by Grey Innovation - * Ben Williamson - * - * This software is distributed under the terms of the GNU General Public - * License ("GPL") version 2, as published by the Free Software Foundation. - * - * This file holds USB constants and structures defined - * by the USB Device Class Definition for MIDI Devices. - * Comments below reference relevant sections of that document: - * - * http://www.usb.org/developers/devclass_docs/midi10.pdf - */ - -#ifndef __LINUX_USB_MIDI_H -#define __LINUX_USB_MIDI_H - -#include - -/* A.1 MS Class-Specific Interface Descriptor Subtypes */ -#define USB_MS_HEADER 0x01 -#define USB_MS_MIDI_IN_JACK 0x02 -#define USB_MS_MIDI_OUT_JACK 0x03 -#define USB_MS_ELEMENT 0x04 - -/* A.2 MS Class-Specific Endpoint Descriptor Subtypes */ -#define USB_MS_GENERAL 0x01 - -/* A.3 MS MIDI IN and OUT Jack Types */ -#define USB_MS_EMBEDDED 0x01 -#define USB_MS_EXTERNAL 0x02 - -/* 6.1.2.1 Class-Specific MS Interface Header Descriptor */ -struct usb_ms_header_descriptor { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDescriptorSubtype; - __le16 bcdMSC; - __le16 wTotalLength; -} __attribute__ ((packed)); - -#define USB_DT_MS_HEADER_SIZE 7 - -/* 6.1.2.2 MIDI IN Jack Descriptor */ -struct usb_midi_in_jack_descriptor { - __u8 bLength; - __u8 bDescriptorType; /* USB_DT_CS_INTERFACE */ - __u8 bDescriptorSubtype; /* USB_MS_MIDI_IN_JACK */ - __u8 bJackType; /* USB_MS_EMBEDDED/EXTERNAL */ - __u8 bJackID; - __u8 iJack; -} __attribute__ ((packed)); - -#define USB_DT_MIDI_IN_SIZE 6 - -struct usb_midi_source_pin { - __u8 baSourceID; - __u8 baSourcePin; -} __attribute__ ((packed)); - -/* 6.1.2.3 MIDI OUT Jack Descriptor */ -struct usb_midi_out_jack_descriptor { - __u8 bLength; - __u8 bDescriptorType; /* USB_DT_CS_INTERFACE */ - __u8 bDescriptorSubtype; /* USB_MS_MIDI_OUT_JACK */ - __u8 bJackType; /* USB_MS_EMBEDDED/EXTERNAL */ - __u8 bJackID; - __u8 bNrInputPins; /* p */ - struct usb_midi_source_pin pins[]; /* [p] */ - /*__u8 iJack; -- omitted due to variable-sized pins[] */ -} __attribute__ ((packed)); - -#define USB_DT_MIDI_OUT_SIZE(p) (7 + 2 * (p)) - -/* As above, but more useful for defining your own descriptors: */ -#define DECLARE_USB_MIDI_OUT_JACK_DESCRIPTOR(p) \ -struct usb_midi_out_jack_descriptor_##p { \ - __u8 bLength; \ - __u8 bDescriptorType; \ - __u8 bDescriptorSubtype; \ - __u8 bJackType; \ - __u8 bJackID; \ - __u8 bNrInputPins; \ - struct usb_midi_source_pin pins[p]; \ - __u8 iJack; \ -} __attribute__ ((packed)) - -/* 6.2.2 Class-Specific MS Bulk Data Endpoint Descriptor */ -struct usb_ms_endpoint_descriptor { - __u8 bLength; /* 4+n */ - __u8 bDescriptorType; /* USB_DT_CS_ENDPOINT */ - __u8 bDescriptorSubtype; /* USB_MS_GENERAL */ - __u8 bNumEmbMIDIJack; /* n */ - __u8 baAssocJackID[]; /* [n] */ -} __attribute__ ((packed)); - -#define USB_DT_MS_ENDPOINT_SIZE(n) (4 + (n)) - -/* As above, but more useful for defining your own descriptors: */ -#define DECLARE_USB_MS_ENDPOINT_DESCRIPTOR(n) \ -struct usb_ms_endpoint_descriptor_##n { \ - __u8 bLength; \ - __u8 bDescriptorType; \ - __u8 bDescriptorSubtype; \ - __u8 bNumEmbMIDIJack; \ - __u8 baAssocJackID[n]; \ -} __attribute__ ((packed)) - -#endif /* __LINUX_USB_MIDI_H */ diff --git a/include/linux/usb/tmc.h b/include/linux/usb/tmc.h deleted file mode 100644 index c045ae12556c..000000000000 --- a/include/linux/usb/tmc.h +++ /dev/null @@ -1,43 +0,0 @@ -/* - * Copyright (C) 2007 Stefan Kopp, Gechingen, Germany - * Copyright (C) 2008 Novell, Inc. - * Copyright (C) 2008 Greg Kroah-Hartman - * - * This file holds USB constants defined by the USB Device Class - * Definition for Test and Measurement devices published by the USB-IF. - * - * It also has the ioctl definitions for the usbtmc kernel driver that - * userspace needs to know about. - */ - -#ifndef __LINUX_USB_TMC_H -#define __LINUX_USB_TMC_H - -/* USB TMC status values */ -#define USBTMC_STATUS_SUCCESS 0x01 -#define USBTMC_STATUS_PENDING 0x02 -#define USBTMC_STATUS_FAILED 0x80 -#define USBTMC_STATUS_TRANSFER_NOT_IN_PROGRESS 0x81 -#define USBTMC_STATUS_SPLIT_NOT_IN_PROGRESS 0x82 -#define USBTMC_STATUS_SPLIT_IN_PROGRESS 0x83 - -/* USB TMC requests values */ -#define USBTMC_REQUEST_INITIATE_ABORT_BULK_OUT 1 -#define USBTMC_REQUEST_CHECK_ABORT_BULK_OUT_STATUS 2 -#define USBTMC_REQUEST_INITIATE_ABORT_BULK_IN 3 -#define USBTMC_REQUEST_CHECK_ABORT_BULK_IN_STATUS 4 -#define USBTMC_REQUEST_INITIATE_CLEAR 5 -#define USBTMC_REQUEST_CHECK_CLEAR_STATUS 6 -#define USBTMC_REQUEST_GET_CAPABILITIES 7 -#define USBTMC_REQUEST_INDICATOR_PULSE 64 - -/* Request values for USBTMC driver's ioctl entry point */ -#define USBTMC_IOC_NR 91 -#define USBTMC_IOCTL_INDICATOR_PULSE _IO(USBTMC_IOC_NR, 1) -#define USBTMC_IOCTL_CLEAR _IO(USBTMC_IOC_NR, 2) -#define USBTMC_IOCTL_ABORT_BULK_OUT _IO(USBTMC_IOC_NR, 3) -#define USBTMC_IOCTL_ABORT_BULK_IN _IO(USBTMC_IOC_NR, 4) -#define USBTMC_IOCTL_CLEAR_OUT_HALT _IO(USBTMC_IOC_NR, 6) -#define USBTMC_IOCTL_CLEAR_IN_HALT _IO(USBTMC_IOC_NR, 7) - -#endif diff --git a/include/linux/usb/video.h b/include/linux/usb/video.h deleted file mode 100644 index 3b3b95e01f71..000000000000 --- a/include/linux/usb/video.h +++ /dev/null @@ -1,568 +0,0 @@ -/* - * USB Video Class definitions. - * - * Copyright (C) 2009 Laurent Pinchart - * - * This file holds USB constants and structures defined by the USB Device - * Class Definition for Video Devices. Unless otherwise stated, comments - * below reference relevant sections of the USB Video Class 1.1 specification - * available at - * - * http://www.usb.org/developers/devclass_docs/USB_Video_Class_1_1.zip - */ - -#ifndef __LINUX_USB_VIDEO_H -#define __LINUX_USB_VIDEO_H - -#include - -/* -------------------------------------------------------------------------- - * UVC constants - */ - -/* A.2. Video Interface Subclass Codes */ -#define UVC_SC_UNDEFINED 0x00 -#define UVC_SC_VIDEOCONTROL 0x01 -#define UVC_SC_VIDEOSTREAMING 0x02 -#define UVC_SC_VIDEO_INTERFACE_COLLECTION 0x03 - -/* A.3. Video Interface Protocol Codes */ -#define UVC_PC_PROTOCOL_UNDEFINED 0x00 - -/* A.5. Video Class-Specific VC Interface Descriptor Subtypes */ -#define UVC_VC_DESCRIPTOR_UNDEFINED 0x00 -#define UVC_VC_HEADER 0x01 -#define UVC_VC_INPUT_TERMINAL 0x02 -#define UVC_VC_OUTPUT_TERMINAL 0x03 -#define UVC_VC_SELECTOR_UNIT 0x04 -#define UVC_VC_PROCESSING_UNIT 0x05 -#define UVC_VC_EXTENSION_UNIT 0x06 - -/* A.6. Video Class-Specific VS Interface Descriptor Subtypes */ -#define UVC_VS_UNDEFINED 0x00 -#define UVC_VS_INPUT_HEADER 0x01 -#define UVC_VS_OUTPUT_HEADER 0x02 -#define UVC_VS_STILL_IMAGE_FRAME 0x03 -#define UVC_VS_FORMAT_UNCOMPRESSED 0x04 -#define UVC_VS_FRAME_UNCOMPRESSED 0x05 -#define UVC_VS_FORMAT_MJPEG 0x06 -#define UVC_VS_FRAME_MJPEG 0x07 -#define UVC_VS_FORMAT_MPEG2TS 0x0a -#define UVC_VS_FORMAT_DV 0x0c -#define UVC_VS_COLORFORMAT 0x0d -#define UVC_VS_FORMAT_FRAME_BASED 0x10 -#define UVC_VS_FRAME_FRAME_BASED 0x11 -#define UVC_VS_FORMAT_STREAM_BASED 0x12 - -/* A.7. Video Class-Specific Endpoint Descriptor Subtypes */ -#define UVC_EP_UNDEFINED 0x00 -#define UVC_EP_GENERAL 0x01 -#define UVC_EP_ENDPOINT 0x02 -#define UVC_EP_INTERRUPT 0x03 - -/* A.8. Video Class-Specific Request Codes */ -#define UVC_RC_UNDEFINED 0x00 -#define UVC_SET_CUR 0x01 -#define UVC_GET_CUR 0x81 -#define UVC_GET_MIN 0x82 -#define UVC_GET_MAX 0x83 -#define UVC_GET_RES 0x84 -#define UVC_GET_LEN 0x85 -#define UVC_GET_INFO 0x86 -#define UVC_GET_DEF 0x87 - -/* A.9.1. VideoControl Interface Control Selectors */ -#define UVC_VC_CONTROL_UNDEFINED 0x00 -#define UVC_VC_VIDEO_POWER_MODE_CONTROL 0x01 -#define UVC_VC_REQUEST_ERROR_CODE_CONTROL 0x02 - -/* A.9.2. Terminal Control Selectors */ -#define UVC_TE_CONTROL_UNDEFINED 0x00 - -/* A.9.3. Selector Unit Control Selectors */ -#define UVC_SU_CONTROL_UNDEFINED 0x00 -#define UVC_SU_INPUT_SELECT_CONTROL 0x01 - -/* A.9.4. Camera Terminal Control Selectors */ -#define UVC_CT_CONTROL_UNDEFINED 0x00 -#define UVC_CT_SCANNING_MODE_CONTROL 0x01 -#define UVC_CT_AE_MODE_CONTROL 0x02 -#define UVC_CT_AE_PRIORITY_CONTROL 0x03 -#define UVC_CT_EXPOSURE_TIME_ABSOLUTE_CONTROL 0x04 -#define UVC_CT_EXPOSURE_TIME_RELATIVE_CONTROL 0x05 -#define UVC_CT_FOCUS_ABSOLUTE_CONTROL 0x06 -#define UVC_CT_FOCUS_RELATIVE_CONTROL 0x07 -#define UVC_CT_FOCUS_AUTO_CONTROL 0x08 -#define UVC_CT_IRIS_ABSOLUTE_CONTROL 0x09 -#define UVC_CT_IRIS_RELATIVE_CONTROL 0x0a -#define UVC_CT_ZOOM_ABSOLUTE_CONTROL 0x0b -#define UVC_CT_ZOOM_RELATIVE_CONTROL 0x0c -#define UVC_CT_PANTILT_ABSOLUTE_CONTROL 0x0d -#define UVC_CT_PANTILT_RELATIVE_CONTROL 0x0e -#define UVC_CT_ROLL_ABSOLUTE_CONTROL 0x0f -#define UVC_CT_ROLL_RELATIVE_CONTROL 0x10 -#define UVC_CT_PRIVACY_CONTROL 0x11 - -/* A.9.5. Processing Unit Control Selectors */ -#define UVC_PU_CONTROL_UNDEFINED 0x00 -#define UVC_PU_BACKLIGHT_COMPENSATION_CONTROL 0x01 -#define UVC_PU_BRIGHTNESS_CONTROL 0x02 -#define UVC_PU_CONTRAST_CONTROL 0x03 -#define UVC_PU_GAIN_CONTROL 0x04 -#define UVC_PU_POWER_LINE_FREQUENCY_CONTROL 0x05 -#define UVC_PU_HUE_CONTROL 0x06 -#define UVC_PU_SATURATION_CONTROL 0x07 -#define UVC_PU_SHARPNESS_CONTROL 0x08 -#define UVC_PU_GAMMA_CONTROL 0x09 -#define UVC_PU_WHITE_BALANCE_TEMPERATURE_CONTROL 0x0a -#define UVC_PU_WHITE_BALANCE_TEMPERATURE_AUTO_CONTROL 0x0b -#define UVC_PU_WHITE_BALANCE_COMPONENT_CONTROL 0x0c -#define UVC_PU_WHITE_BALANCE_COMPONENT_AUTO_CONTROL 0x0d -#define UVC_PU_DIGITAL_MULTIPLIER_CONTROL 0x0e -#define UVC_PU_DIGITAL_MULTIPLIER_LIMIT_CONTROL 0x0f -#define UVC_PU_HUE_AUTO_CONTROL 0x10 -#define UVC_PU_ANALOG_VIDEO_STANDARD_CONTROL 0x11 -#define UVC_PU_ANALOG_LOCK_STATUS_CONTROL 0x12 - -/* A.9.7. VideoStreaming Interface Control Selectors */ -#define UVC_VS_CONTROL_UNDEFINED 0x00 -#define UVC_VS_PROBE_CONTROL 0x01 -#define UVC_VS_COMMIT_CONTROL 0x02 -#define UVC_VS_STILL_PROBE_CONTROL 0x03 -#define UVC_VS_STILL_COMMIT_CONTROL 0x04 -#define UVC_VS_STILL_IMAGE_TRIGGER_CONTROL 0x05 -#define UVC_VS_STREAM_ERROR_CODE_CONTROL 0x06 -#define UVC_VS_GENERATE_KEY_FRAME_CONTROL 0x07 -#define UVC_VS_UPDATE_FRAME_SEGMENT_CONTROL 0x08 -#define UVC_VS_SYNC_DELAY_CONTROL 0x09 - -/* B.1. USB Terminal Types */ -#define UVC_TT_VENDOR_SPECIFIC 0x0100 -#define UVC_TT_STREAMING 0x0101 - -/* B.2. Input Terminal Types */ -#define UVC_ITT_VENDOR_SPECIFIC 0x0200 -#define UVC_ITT_CAMERA 0x0201 -#define UVC_ITT_MEDIA_TRANSPORT_INPUT 0x0202 - -/* B.3. Output Terminal Types */ -#define UVC_OTT_VENDOR_SPECIFIC 0x0300 -#define UVC_OTT_DISPLAY 0x0301 -#define UVC_OTT_MEDIA_TRANSPORT_OUTPUT 0x0302 - -/* B.4. External Terminal Types */ -#define UVC_EXTERNAL_VENDOR_SPECIFIC 0x0400 -#define UVC_COMPOSITE_CONNECTOR 0x0401 -#define UVC_SVIDEO_CONNECTOR 0x0402 -#define UVC_COMPONENT_CONNECTOR 0x0403 - -/* 2.4.2.2. Status Packet Type */ -#define UVC_STATUS_TYPE_CONTROL 1 -#define UVC_STATUS_TYPE_STREAMING 2 - -/* 2.4.3.3. Payload Header Information */ -#define UVC_STREAM_EOH (1 << 7) -#define UVC_STREAM_ERR (1 << 6) -#define UVC_STREAM_STI (1 << 5) -#define UVC_STREAM_RES (1 << 4) -#define UVC_STREAM_SCR (1 << 3) -#define UVC_STREAM_PTS (1 << 2) -#define UVC_STREAM_EOF (1 << 1) -#define UVC_STREAM_FID (1 << 0) - -/* 4.1.2. Control Capabilities */ -#define UVC_CONTROL_CAP_GET (1 << 0) -#define UVC_CONTROL_CAP_SET (1 << 1) -#define UVC_CONTROL_CAP_DISABLED (1 << 2) -#define UVC_CONTROL_CAP_AUTOUPDATE (1 << 3) -#define UVC_CONTROL_CAP_ASYNCHRONOUS (1 << 4) - -/* ------------------------------------------------------------------------ - * UVC structures - */ - -/* All UVC descriptors have these 3 fields at the beginning */ -struct uvc_descriptor_header { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDescriptorSubType; -} __attribute__((packed)); - -/* 3.7.2. Video Control Interface Header Descriptor */ -struct uvc_header_descriptor { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDescriptorSubType; - __u16 bcdUVC; - __u16 wTotalLength; - __u32 dwClockFrequency; - __u8 bInCollection; - __u8 baInterfaceNr[]; -} __attribute__((__packed__)); - -#define UVC_DT_HEADER_SIZE(n) (12+(n)) - -#define UVC_HEADER_DESCRIPTOR(n) \ - uvc_header_descriptor_##n - -#define DECLARE_UVC_HEADER_DESCRIPTOR(n) \ -struct UVC_HEADER_DESCRIPTOR(n) { \ - __u8 bLength; \ - __u8 bDescriptorType; \ - __u8 bDescriptorSubType; \ - __u16 bcdUVC; \ - __u16 wTotalLength; \ - __u32 dwClockFrequency; \ - __u8 bInCollection; \ - __u8 baInterfaceNr[n]; \ -} __attribute__ ((packed)) - -/* 3.7.2.1. Input Terminal Descriptor */ -struct uvc_input_terminal_descriptor { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDescriptorSubType; - __u8 bTerminalID; - __u16 wTerminalType; - __u8 bAssocTerminal; - __u8 iTerminal; -} __attribute__((__packed__)); - -#define UVC_DT_INPUT_TERMINAL_SIZE 8 - -/* 3.7.2.2. Output Terminal Descriptor */ -struct uvc_output_terminal_descriptor { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDescriptorSubType; - __u8 bTerminalID; - __u16 wTerminalType; - __u8 bAssocTerminal; - __u8 bSourceID; - __u8 iTerminal; -} __attribute__((__packed__)); - -#define UVC_DT_OUTPUT_TERMINAL_SIZE 9 - -/* 3.7.2.3. Camera Terminal Descriptor */ -struct uvc_camera_terminal_descriptor { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDescriptorSubType; - __u8 bTerminalID; - __u16 wTerminalType; - __u8 bAssocTerminal; - __u8 iTerminal; - __u16 wObjectiveFocalLengthMin; - __u16 wObjectiveFocalLengthMax; - __u16 wOcularFocalLength; - __u8 bControlSize; - __u8 bmControls[3]; -} __attribute__((__packed__)); - -#define UVC_DT_CAMERA_TERMINAL_SIZE(n) (15+(n)) - -/* 3.7.2.4. Selector Unit Descriptor */ -struct uvc_selector_unit_descriptor { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDescriptorSubType; - __u8 bUnitID; - __u8 bNrInPins; - __u8 baSourceID[0]; - __u8 iSelector; -} __attribute__((__packed__)); - -#define UVC_DT_SELECTOR_UNIT_SIZE(n) (6+(n)) - -#define UVC_SELECTOR_UNIT_DESCRIPTOR(n) \ - uvc_selector_unit_descriptor_##n - -#define DECLARE_UVC_SELECTOR_UNIT_DESCRIPTOR(n) \ -struct UVC_SELECTOR_UNIT_DESCRIPTOR(n) { \ - __u8 bLength; \ - __u8 bDescriptorType; \ - __u8 bDescriptorSubType; \ - __u8 bUnitID; \ - __u8 bNrInPins; \ - __u8 baSourceID[n]; \ - __u8 iSelector; \ -} __attribute__ ((packed)) - -/* 3.7.2.5. Processing Unit Descriptor */ -struct uvc_processing_unit_descriptor { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDescriptorSubType; - __u8 bUnitID; - __u8 bSourceID; - __u16 wMaxMultiplier; - __u8 bControlSize; - __u8 bmControls[2]; - __u8 iProcessing; -} __attribute__((__packed__)); - -#define UVC_DT_PROCESSING_UNIT_SIZE(n) (9+(n)) - -/* 3.7.2.6. Extension Unit Descriptor */ -struct uvc_extension_unit_descriptor { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDescriptorSubType; - __u8 bUnitID; - __u8 guidExtensionCode[16]; - __u8 bNumControls; - __u8 bNrInPins; - __u8 baSourceID[0]; - __u8 bControlSize; - __u8 bmControls[0]; - __u8 iExtension; -} __attribute__((__packed__)); - -#define UVC_DT_EXTENSION_UNIT_SIZE(p, n) (24+(p)+(n)) - -#define UVC_EXTENSION_UNIT_DESCRIPTOR(p, n) \ - uvc_extension_unit_descriptor_##p_##n - -#define DECLARE_UVC_EXTENSION_UNIT_DESCRIPTOR(p, n) \ -struct UVC_EXTENSION_UNIT_DESCRIPTOR(p, n) { \ - __u8 bLength; \ - __u8 bDescriptorType; \ - __u8 bDescriptorSubType; \ - __u8 bUnitID; \ - __u8 guidExtensionCode[16]; \ - __u8 bNumControls; \ - __u8 bNrInPins; \ - __u8 baSourceID[p]; \ - __u8 bControlSize; \ - __u8 bmControls[n]; \ - __u8 iExtension; \ -} __attribute__ ((packed)) - -/* 3.8.2.2. Video Control Interrupt Endpoint Descriptor */ -struct uvc_control_endpoint_descriptor { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDescriptorSubType; - __u16 wMaxTransferSize; -} __attribute__((__packed__)); - -#define UVC_DT_CONTROL_ENDPOINT_SIZE 5 - -/* 3.9.2.1. Input Header Descriptor */ -struct uvc_input_header_descriptor { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDescriptorSubType; - __u8 bNumFormats; - __u16 wTotalLength; - __u8 bEndpointAddress; - __u8 bmInfo; - __u8 bTerminalLink; - __u8 bStillCaptureMethod; - __u8 bTriggerSupport; - __u8 bTriggerUsage; - __u8 bControlSize; - __u8 bmaControls[]; -} __attribute__((__packed__)); - -#define UVC_DT_INPUT_HEADER_SIZE(n, p) (13+(n*p)) - -#define UVC_INPUT_HEADER_DESCRIPTOR(n, p) \ - uvc_input_header_descriptor_##n_##p - -#define DECLARE_UVC_INPUT_HEADER_DESCRIPTOR(n, p) \ -struct UVC_INPUT_HEADER_DESCRIPTOR(n, p) { \ - __u8 bLength; \ - __u8 bDescriptorType; \ - __u8 bDescriptorSubType; \ - __u8 bNumFormats; \ - __u16 wTotalLength; \ - __u8 bEndpointAddress; \ - __u8 bmInfo; \ - __u8 bTerminalLink; \ - __u8 bStillCaptureMethod; \ - __u8 bTriggerSupport; \ - __u8 bTriggerUsage; \ - __u8 bControlSize; \ - __u8 bmaControls[p][n]; \ -} __attribute__ ((packed)) - -/* 3.9.2.2. Output Header Descriptor */ -struct uvc_output_header_descriptor { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDescriptorSubType; - __u8 bNumFormats; - __u16 wTotalLength; - __u8 bEndpointAddress; - __u8 bTerminalLink; - __u8 bControlSize; - __u8 bmaControls[]; -} __attribute__((__packed__)); - -#define UVC_DT_OUTPUT_HEADER_SIZE(n, p) (9+(n*p)) - -#define UVC_OUTPUT_HEADER_DESCRIPTOR(n, p) \ - uvc_output_header_descriptor_##n_##p - -#define DECLARE_UVC_OUTPUT_HEADER_DESCRIPTOR(n, p) \ -struct UVC_OUTPUT_HEADER_DESCRIPTOR(n, p) { \ - __u8 bLength; \ - __u8 bDescriptorType; \ - __u8 bDescriptorSubType; \ - __u8 bNumFormats; \ - __u16 wTotalLength; \ - __u8 bEndpointAddress; \ - __u8 bTerminalLink; \ - __u8 bControlSize; \ - __u8 bmaControls[p][n]; \ -} __attribute__ ((packed)) - -/* 3.9.2.6. Color matching descriptor */ -struct uvc_color_matching_descriptor { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDescriptorSubType; - __u8 bColorPrimaries; - __u8 bTransferCharacteristics; - __u8 bMatrixCoefficients; -} __attribute__((__packed__)); - -#define UVC_DT_COLOR_MATCHING_SIZE 6 - -/* 4.3.1.1. Video Probe and Commit Controls */ -struct uvc_streaming_control { - __u16 bmHint; - __u8 bFormatIndex; - __u8 bFrameIndex; - __u32 dwFrameInterval; - __u16 wKeyFrameRate; - __u16 wPFrameRate; - __u16 wCompQuality; - __u16 wCompWindowSize; - __u16 wDelay; - __u32 dwMaxVideoFrameSize; - __u32 dwMaxPayloadTransferSize; - __u32 dwClockFrequency; - __u8 bmFramingInfo; - __u8 bPreferedVersion; - __u8 bMinVersion; - __u8 bMaxVersion; -} __attribute__((__packed__)); - -/* Uncompressed Payload - 3.1.1. Uncompressed Video Format Descriptor */ -struct uvc_format_uncompressed { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDescriptorSubType; - __u8 bFormatIndex; - __u8 bNumFrameDescriptors; - __u8 guidFormat[16]; - __u8 bBitsPerPixel; - __u8 bDefaultFrameIndex; - __u8 bAspectRatioX; - __u8 bAspectRatioY; - __u8 bmInterfaceFlags; - __u8 bCopyProtect; -} __attribute__((__packed__)); - -#define UVC_DT_FORMAT_UNCOMPRESSED_SIZE 27 - -/* Uncompressed Payload - 3.1.2. Uncompressed Video Frame Descriptor */ -struct uvc_frame_uncompressed { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDescriptorSubType; - __u8 bFrameIndex; - __u8 bmCapabilities; - __u16 wWidth; - __u16 wHeight; - __u32 dwMinBitRate; - __u32 dwMaxBitRate; - __u32 dwMaxVideoFrameBufferSize; - __u32 dwDefaultFrameInterval; - __u8 bFrameIntervalType; - __u32 dwFrameInterval[]; -} __attribute__((__packed__)); - -#define UVC_DT_FRAME_UNCOMPRESSED_SIZE(n) (26+4*(n)) - -#define UVC_FRAME_UNCOMPRESSED(n) \ - uvc_frame_uncompressed_##n - -#define DECLARE_UVC_FRAME_UNCOMPRESSED(n) \ -struct UVC_FRAME_UNCOMPRESSED(n) { \ - __u8 bLength; \ - __u8 bDescriptorType; \ - __u8 bDescriptorSubType; \ - __u8 bFrameIndex; \ - __u8 bmCapabilities; \ - __u16 wWidth; \ - __u16 wHeight; \ - __u32 dwMinBitRate; \ - __u32 dwMaxBitRate; \ - __u32 dwMaxVideoFrameBufferSize; \ - __u32 dwDefaultFrameInterval; \ - __u8 bFrameIntervalType; \ - __u32 dwFrameInterval[n]; \ -} __attribute__ ((packed)) - -/* MJPEG Payload - 3.1.1. MJPEG Video Format Descriptor */ -struct uvc_format_mjpeg { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDescriptorSubType; - __u8 bFormatIndex; - __u8 bNumFrameDescriptors; - __u8 bmFlags; - __u8 bDefaultFrameIndex; - __u8 bAspectRatioX; - __u8 bAspectRatioY; - __u8 bmInterfaceFlags; - __u8 bCopyProtect; -} __attribute__((__packed__)); - -#define UVC_DT_FORMAT_MJPEG_SIZE 11 - -/* MJPEG Payload - 3.1.2. MJPEG Video Frame Descriptor */ -struct uvc_frame_mjpeg { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDescriptorSubType; - __u8 bFrameIndex; - __u8 bmCapabilities; - __u16 wWidth; - __u16 wHeight; - __u32 dwMinBitRate; - __u32 dwMaxBitRate; - __u32 dwMaxVideoFrameBufferSize; - __u32 dwDefaultFrameInterval; - __u8 bFrameIntervalType; - __u32 dwFrameInterval[]; -} __attribute__((__packed__)); - -#define UVC_DT_FRAME_MJPEG_SIZE(n) (26+4*(n)) - -#define UVC_FRAME_MJPEG(n) \ - uvc_frame_mjpeg_##n - -#define DECLARE_UVC_FRAME_MJPEG(n) \ -struct UVC_FRAME_MJPEG(n) { \ - __u8 bLength; \ - __u8 bDescriptorType; \ - __u8 bDescriptorSubType; \ - __u8 bFrameIndex; \ - __u8 bmCapabilities; \ - __u16 wWidth; \ - __u16 wHeight; \ - __u32 dwMinBitRate; \ - __u32 dwMaxBitRate; \ - __u32 dwMaxVideoFrameBufferSize; \ - __u32 dwDefaultFrameInterval; \ - __u8 bFrameIntervalType; \ - __u32 dwFrameInterval[n]; \ -} __attribute__ ((packed)) - -#endif /* __LINUX_USB_VIDEO_H */ - diff --git a/include/uapi/linux/usb/Kbuild b/include/uapi/linux/usb/Kbuild index aafaa5aa54d4..6cb4ea826834 100644 --- a/include/uapi/linux/usb/Kbuild +++ b/include/uapi/linux/usb/Kbuild @@ -1 +1,11 @@ # UAPI Header export list +header-y += audio.h +header-y += cdc.h +header-y += ch11.h +header-y += ch9.h +header-y += functionfs.h +header-y += g_printer.h +header-y += gadgetfs.h +header-y += midi.h +header-y += tmc.h +header-y += video.h diff --git a/include/uapi/linux/usb/audio.h b/include/uapi/linux/usb/audio.h new file mode 100644 index 000000000000..ac90037894d9 --- /dev/null +++ b/include/uapi/linux/usb/audio.h @@ -0,0 +1,545 @@ +/* + * -- USB Audio definitions. + * + * Copyright (C) 2006 Thumtronics Pty Ltd. + * Developed for Thumtronics by Grey Innovation + * Ben Williamson + * + * This software is distributed under the terms of the GNU General Public + * License ("GPL") version 2, as published by the Free Software Foundation. + * + * This file holds USB constants and structures defined + * by the USB Device Class Definition for Audio Devices. + * Comments below reference relevant sections of that document: + * + * http://www.usb.org/developers/devclass_docs/audio10.pdf + * + * Types and defines in this file are either specific to version 1.0 of + * this standard or common for newer versions. + */ + +#ifndef _UAPI__LINUX_USB_AUDIO_H +#define _UAPI__LINUX_USB_AUDIO_H + +#include + +/* bInterfaceProtocol values to denote the version of the standard used */ +#define UAC_VERSION_1 0x00 +#define UAC_VERSION_2 0x20 + +/* A.2 Audio Interface Subclass Codes */ +#define USB_SUBCLASS_AUDIOCONTROL 0x01 +#define USB_SUBCLASS_AUDIOSTREAMING 0x02 +#define USB_SUBCLASS_MIDISTREAMING 0x03 + +/* A.5 Audio Class-Specific AC Interface Descriptor Subtypes */ +#define UAC_HEADER 0x01 +#define UAC_INPUT_TERMINAL 0x02 +#define UAC_OUTPUT_TERMINAL 0x03 +#define UAC_MIXER_UNIT 0x04 +#define UAC_SELECTOR_UNIT 0x05 +#define UAC_FEATURE_UNIT 0x06 +#define UAC1_PROCESSING_UNIT 0x07 +#define UAC1_EXTENSION_UNIT 0x08 + +/* A.6 Audio Class-Specific AS Interface Descriptor Subtypes */ +#define UAC_AS_GENERAL 0x01 +#define UAC_FORMAT_TYPE 0x02 +#define UAC_FORMAT_SPECIFIC 0x03 + +/* A.7 Processing Unit Process Types */ +#define UAC_PROCESS_UNDEFINED 0x00 +#define UAC_PROCESS_UP_DOWNMIX 0x01 +#define UAC_PROCESS_DOLBY_PROLOGIC 0x02 +#define UAC_PROCESS_STEREO_EXTENDER 0x03 +#define UAC_PROCESS_REVERB 0x04 +#define UAC_PROCESS_CHORUS 0x05 +#define UAC_PROCESS_DYN_RANGE_COMP 0x06 + +/* A.8 Audio Class-Specific Endpoint Descriptor Subtypes */ +#define UAC_EP_GENERAL 0x01 + +/* A.9 Audio Class-Specific Request Codes */ +#define UAC_SET_ 0x00 +#define UAC_GET_ 0x80 + +#define UAC__CUR 0x1 +#define UAC__MIN 0x2 +#define UAC__MAX 0x3 +#define UAC__RES 0x4 +#define UAC__MEM 0x5 + +#define UAC_SET_CUR (UAC_SET_ | UAC__CUR) +#define UAC_GET_CUR (UAC_GET_ | UAC__CUR) +#define UAC_SET_MIN (UAC_SET_ | UAC__MIN) +#define UAC_GET_MIN (UAC_GET_ | UAC__MIN) +#define UAC_SET_MAX (UAC_SET_ | UAC__MAX) +#define UAC_GET_MAX (UAC_GET_ | UAC__MAX) +#define UAC_SET_RES (UAC_SET_ | UAC__RES) +#define UAC_GET_RES (UAC_GET_ | UAC__RES) +#define UAC_SET_MEM (UAC_SET_ | UAC__MEM) +#define UAC_GET_MEM (UAC_GET_ | UAC__MEM) + +#define UAC_GET_STAT 0xff + +/* A.10 Control Selector Codes */ + +/* A.10.1 Terminal Control Selectors */ +#define UAC_TERM_COPY_PROTECT 0x01 + +/* A.10.2 Feature Unit Control Selectors */ +#define UAC_FU_MUTE 0x01 +#define UAC_FU_VOLUME 0x02 +#define UAC_FU_BASS 0x03 +#define UAC_FU_MID 0x04 +#define UAC_FU_TREBLE 0x05 +#define UAC_FU_GRAPHIC_EQUALIZER 0x06 +#define UAC_FU_AUTOMATIC_GAIN 0x07 +#define UAC_FU_DELAY 0x08 +#define UAC_FU_BASS_BOOST 0x09 +#define UAC_FU_LOUDNESS 0x0a + +#define UAC_CONTROL_BIT(CS) (1 << ((CS) - 1)) + +/* A.10.3.1 Up/Down-mix Processing Unit Controls Selectors */ +#define UAC_UD_ENABLE 0x01 +#define UAC_UD_MODE_SELECT 0x02 + +/* A.10.3.2 Dolby Prologic (tm) Processing Unit Controls Selectors */ +#define UAC_DP_ENABLE 0x01 +#define UAC_DP_MODE_SELECT 0x02 + +/* A.10.3.3 3D Stereo Extender Processing Unit Control Selectors */ +#define UAC_3D_ENABLE 0x01 +#define UAC_3D_SPACE 0x02 + +/* A.10.3.4 Reverberation Processing Unit Control Selectors */ +#define UAC_REVERB_ENABLE 0x01 +#define UAC_REVERB_LEVEL 0x02 +#define UAC_REVERB_TIME 0x03 +#define UAC_REVERB_FEEDBACK 0x04 + +/* A.10.3.5 Chorus Processing Unit Control Selectors */ +#define UAC_CHORUS_ENABLE 0x01 +#define UAC_CHORUS_LEVEL 0x02 +#define UAC_CHORUS_RATE 0x03 +#define UAC_CHORUS_DEPTH 0x04 + +/* A.10.3.6 Dynamic Range Compressor Unit Control Selectors */ +#define UAC_DCR_ENABLE 0x01 +#define UAC_DCR_RATE 0x02 +#define UAC_DCR_MAXAMPL 0x03 +#define UAC_DCR_THRESHOLD 0x04 +#define UAC_DCR_ATTACK_TIME 0x05 +#define UAC_DCR_RELEASE_TIME 0x06 + +/* A.10.4 Extension Unit Control Selectors */ +#define UAC_XU_ENABLE 0x01 + +/* MIDI - A.1 MS Class-Specific Interface Descriptor Subtypes */ +#define UAC_MS_HEADER 0x01 +#define UAC_MIDI_IN_JACK 0x02 +#define UAC_MIDI_OUT_JACK 0x03 + +/* MIDI - A.1 MS Class-Specific Endpoint Descriptor Subtypes */ +#define UAC_MS_GENERAL 0x01 + +/* Terminals - 2.1 USB Terminal Types */ +#define UAC_TERMINAL_UNDEFINED 0x100 +#define UAC_TERMINAL_STREAMING 0x101 +#define UAC_TERMINAL_VENDOR_SPEC 0x1FF + +/* Terminal Control Selectors */ +/* 4.3.2 Class-Specific AC Interface Descriptor */ +struct uac1_ac_header_descriptor { + __u8 bLength; /* 8 + n */ + __u8 bDescriptorType; /* USB_DT_CS_INTERFACE */ + __u8 bDescriptorSubtype; /* UAC_MS_HEADER */ + __le16 bcdADC; /* 0x0100 */ + __le16 wTotalLength; /* includes Unit and Terminal desc. */ + __u8 bInCollection; /* n */ + __u8 baInterfaceNr[]; /* [n] */ +} __attribute__ ((packed)); + +#define UAC_DT_AC_HEADER_SIZE(n) (8 + (n)) + +/* As above, but more useful for defining your own descriptors: */ +#define DECLARE_UAC_AC_HEADER_DESCRIPTOR(n) \ +struct uac1_ac_header_descriptor_##n { \ + __u8 bLength; \ + __u8 bDescriptorType; \ + __u8 bDescriptorSubtype; \ + __le16 bcdADC; \ + __le16 wTotalLength; \ + __u8 bInCollection; \ + __u8 baInterfaceNr[n]; \ +} __attribute__ ((packed)) + +/* 4.3.2.1 Input Terminal Descriptor */ +struct uac_input_terminal_descriptor { + __u8 bLength; /* in bytes: 12 */ + __u8 bDescriptorType; /* CS_INTERFACE descriptor type */ + __u8 bDescriptorSubtype; /* INPUT_TERMINAL descriptor subtype */ + __u8 bTerminalID; /* Constant uniquely terminal ID */ + __le16 wTerminalType; /* USB Audio Terminal Types */ + __u8 bAssocTerminal; /* ID of the Output Terminal associated */ + __u8 bNrChannels; /* Number of logical output channels */ + __le16 wChannelConfig; + __u8 iChannelNames; + __u8 iTerminal; +} __attribute__ ((packed)); + +#define UAC_DT_INPUT_TERMINAL_SIZE 12 + +/* Terminals - 2.2 Input Terminal Types */ +#define UAC_INPUT_TERMINAL_UNDEFINED 0x200 +#define UAC_INPUT_TERMINAL_MICROPHONE 0x201 +#define UAC_INPUT_TERMINAL_DESKTOP_MICROPHONE 0x202 +#define UAC_INPUT_TERMINAL_PERSONAL_MICROPHONE 0x203 +#define UAC_INPUT_TERMINAL_OMNI_DIR_MICROPHONE 0x204 +#define UAC_INPUT_TERMINAL_MICROPHONE_ARRAY 0x205 +#define UAC_INPUT_TERMINAL_PROC_MICROPHONE_ARRAY 0x206 + +/* Terminals - control selectors */ + +#define UAC_TERMINAL_CS_COPY_PROTECT_CONTROL 0x01 + +/* 4.3.2.2 Output Terminal Descriptor */ +struct uac1_output_terminal_descriptor { + __u8 bLength; /* in bytes: 9 */ + __u8 bDescriptorType; /* CS_INTERFACE descriptor type */ + __u8 bDescriptorSubtype; /* OUTPUT_TERMINAL descriptor subtype */ + __u8 bTerminalID; /* Constant uniquely terminal ID */ + __le16 wTerminalType; /* USB Audio Terminal Types */ + __u8 bAssocTerminal; /* ID of the Input Terminal associated */ + __u8 bSourceID; /* ID of the connected Unit or Terminal*/ + __u8 iTerminal; +} __attribute__ ((packed)); + +#define UAC_DT_OUTPUT_TERMINAL_SIZE 9 + +/* Terminals - 2.3 Output Terminal Types */ +#define UAC_OUTPUT_TERMINAL_UNDEFINED 0x300 +#define UAC_OUTPUT_TERMINAL_SPEAKER 0x301 +#define UAC_OUTPUT_TERMINAL_HEADPHONES 0x302 +#define UAC_OUTPUT_TERMINAL_HEAD_MOUNTED_DISPLAY_AUDIO 0x303 +#define UAC_OUTPUT_TERMINAL_DESKTOP_SPEAKER 0x304 +#define UAC_OUTPUT_TERMINAL_ROOM_SPEAKER 0x305 +#define UAC_OUTPUT_TERMINAL_COMMUNICATION_SPEAKER 0x306 +#define UAC_OUTPUT_TERMINAL_LOW_FREQ_EFFECTS_SPEAKER 0x307 + +/* Set bControlSize = 2 as default setting */ +#define UAC_DT_FEATURE_UNIT_SIZE(ch) (7 + ((ch) + 1) * 2) + +/* As above, but more useful for defining your own descriptors: */ +#define DECLARE_UAC_FEATURE_UNIT_DESCRIPTOR(ch) \ +struct uac_feature_unit_descriptor_##ch { \ + __u8 bLength; \ + __u8 bDescriptorType; \ + __u8 bDescriptorSubtype; \ + __u8 bUnitID; \ + __u8 bSourceID; \ + __u8 bControlSize; \ + __le16 bmaControls[ch + 1]; \ + __u8 iFeature; \ +} __attribute__ ((packed)) + +/* 4.3.2.3 Mixer Unit Descriptor */ +struct uac_mixer_unit_descriptor { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDescriptorSubtype; + __u8 bUnitID; + __u8 bNrInPins; + __u8 baSourceID[]; +} __attribute__ ((packed)); + +static inline __u8 uac_mixer_unit_bNrChannels(struct uac_mixer_unit_descriptor *desc) +{ + return desc->baSourceID[desc->bNrInPins]; +} + +static inline __u32 uac_mixer_unit_wChannelConfig(struct uac_mixer_unit_descriptor *desc, + int protocol) +{ + if (protocol == UAC_VERSION_1) + return (desc->baSourceID[desc->bNrInPins + 2] << 8) | + desc->baSourceID[desc->bNrInPins + 1]; + else + return (desc->baSourceID[desc->bNrInPins + 4] << 24) | + (desc->baSourceID[desc->bNrInPins + 3] << 16) | + (desc->baSourceID[desc->bNrInPins + 2] << 8) | + (desc->baSourceID[desc->bNrInPins + 1]); +} + +static inline __u8 uac_mixer_unit_iChannelNames(struct uac_mixer_unit_descriptor *desc, + int protocol) +{ + return (protocol == UAC_VERSION_1) ? + desc->baSourceID[desc->bNrInPins + 3] : + desc->baSourceID[desc->bNrInPins + 5]; +} + +static inline __u8 *uac_mixer_unit_bmControls(struct uac_mixer_unit_descriptor *desc, + int protocol) +{ + return (protocol == UAC_VERSION_1) ? + &desc->baSourceID[desc->bNrInPins + 4] : + &desc->baSourceID[desc->bNrInPins + 6]; +} + +static inline __u8 uac_mixer_unit_iMixer(struct uac_mixer_unit_descriptor *desc) +{ + __u8 *raw = (__u8 *) desc; + return raw[desc->bLength - 1]; +} + +/* 4.3.2.4 Selector Unit Descriptor */ +struct uac_selector_unit_descriptor { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDescriptorSubtype; + __u8 bUintID; + __u8 bNrInPins; + __u8 baSourceID[]; +} __attribute__ ((packed)); + +static inline __u8 uac_selector_unit_iSelector(struct uac_selector_unit_descriptor *desc) +{ + __u8 *raw = (__u8 *) desc; + return raw[desc->bLength - 1]; +} + +/* 4.3.2.5 Feature Unit Descriptor */ +struct uac_feature_unit_descriptor { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDescriptorSubtype; + __u8 bUnitID; + __u8 bSourceID; + __u8 bControlSize; + __u8 bmaControls[0]; /* variable length */ +} __attribute__((packed)); + +static inline __u8 uac_feature_unit_iFeature(struct uac_feature_unit_descriptor *desc) +{ + __u8 *raw = (__u8 *) desc; + return raw[desc->bLength - 1]; +} + +/* 4.3.2.6 Processing Unit Descriptors */ +struct uac_processing_unit_descriptor { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDescriptorSubtype; + __u8 bUnitID; + __u16 wProcessType; + __u8 bNrInPins; + __u8 baSourceID[]; +} __attribute__ ((packed)); + +static inline __u8 uac_processing_unit_bNrChannels(struct uac_processing_unit_descriptor *desc) +{ + return desc->baSourceID[desc->bNrInPins]; +} + +static inline __u32 uac_processing_unit_wChannelConfig(struct uac_processing_unit_descriptor *desc, + int protocol) +{ + if (protocol == UAC_VERSION_1) + return (desc->baSourceID[desc->bNrInPins + 2] << 8) | + desc->baSourceID[desc->bNrInPins + 1]; + else + return (desc->baSourceID[desc->bNrInPins + 4] << 24) | + (desc->baSourceID[desc->bNrInPins + 3] << 16) | + (desc->baSourceID[desc->bNrInPins + 2] << 8) | + (desc->baSourceID[desc->bNrInPins + 1]); +} + +static inline __u8 uac_processing_unit_iChannelNames(struct uac_processing_unit_descriptor *desc, + int protocol) +{ + return (protocol == UAC_VERSION_1) ? + desc->baSourceID[desc->bNrInPins + 3] : + desc->baSourceID[desc->bNrInPins + 5]; +} + +static inline __u8 uac_processing_unit_bControlSize(struct uac_processing_unit_descriptor *desc, + int protocol) +{ + return (protocol == UAC_VERSION_1) ? + desc->baSourceID[desc->bNrInPins + 4] : + desc->baSourceID[desc->bNrInPins + 6]; +} + +static inline __u8 *uac_processing_unit_bmControls(struct uac_processing_unit_descriptor *desc, + int protocol) +{ + return (protocol == UAC_VERSION_1) ? + &desc->baSourceID[desc->bNrInPins + 5] : + &desc->baSourceID[desc->bNrInPins + 7]; +} + +static inline __u8 uac_processing_unit_iProcessing(struct uac_processing_unit_descriptor *desc, + int protocol) +{ + __u8 control_size = uac_processing_unit_bControlSize(desc, protocol); + return desc->baSourceID[desc->bNrInPins + control_size]; +} + +static inline __u8 *uac_processing_unit_specific(struct uac_processing_unit_descriptor *desc, + int protocol) +{ + __u8 control_size = uac_processing_unit_bControlSize(desc, protocol); + return &desc->baSourceID[desc->bNrInPins + control_size + 1]; +} + +/* 4.5.2 Class-Specific AS Interface Descriptor */ +struct uac1_as_header_descriptor { + __u8 bLength; /* in bytes: 7 */ + __u8 bDescriptorType; /* USB_DT_CS_INTERFACE */ + __u8 bDescriptorSubtype; /* AS_GENERAL */ + __u8 bTerminalLink; /* Terminal ID of connected Terminal */ + __u8 bDelay; /* Delay introduced by the data path */ + __le16 wFormatTag; /* The Audio Data Format */ +} __attribute__ ((packed)); + +#define UAC_DT_AS_HEADER_SIZE 7 + +/* Formats - A.1.1 Audio Data Format Type I Codes */ +#define UAC_FORMAT_TYPE_I_UNDEFINED 0x0 +#define UAC_FORMAT_TYPE_I_PCM 0x1 +#define UAC_FORMAT_TYPE_I_PCM8 0x2 +#define UAC_FORMAT_TYPE_I_IEEE_FLOAT 0x3 +#define UAC_FORMAT_TYPE_I_ALAW 0x4 +#define UAC_FORMAT_TYPE_I_MULAW 0x5 + +struct uac_format_type_i_continuous_descriptor { + __u8 bLength; /* in bytes: 8 + (ns * 3) */ + __u8 bDescriptorType; /* USB_DT_CS_INTERFACE */ + __u8 bDescriptorSubtype; /* FORMAT_TYPE */ + __u8 bFormatType; /* FORMAT_TYPE_1 */ + __u8 bNrChannels; /* physical channels in the stream */ + __u8 bSubframeSize; /* */ + __u8 bBitResolution; + __u8 bSamFreqType; + __u8 tLowerSamFreq[3]; + __u8 tUpperSamFreq[3]; +} __attribute__ ((packed)); + +#define UAC_FORMAT_TYPE_I_CONTINUOUS_DESC_SIZE 14 + +struct uac_format_type_i_discrete_descriptor { + __u8 bLength; /* in bytes: 8 + (ns * 3) */ + __u8 bDescriptorType; /* USB_DT_CS_INTERFACE */ + __u8 bDescriptorSubtype; /* FORMAT_TYPE */ + __u8 bFormatType; /* FORMAT_TYPE_1 */ + __u8 bNrChannels; /* physical channels in the stream */ + __u8 bSubframeSize; /* */ + __u8 bBitResolution; + __u8 bSamFreqType; + __u8 tSamFreq[][3]; +} __attribute__ ((packed)); + +#define DECLARE_UAC_FORMAT_TYPE_I_DISCRETE_DESC(n) \ +struct uac_format_type_i_discrete_descriptor_##n { \ + __u8 bLength; \ + __u8 bDescriptorType; \ + __u8 bDescriptorSubtype; \ + __u8 bFormatType; \ + __u8 bNrChannels; \ + __u8 bSubframeSize; \ + __u8 bBitResolution; \ + __u8 bSamFreqType; \ + __u8 tSamFreq[n][3]; \ +} __attribute__ ((packed)) + +#define UAC_FORMAT_TYPE_I_DISCRETE_DESC_SIZE(n) (8 + (n * 3)) + +struct uac_format_type_i_ext_descriptor { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDescriptorSubtype; + __u8 bFormatType; + __u8 bSubslotSize; + __u8 bBitResolution; + __u8 bHeaderLength; + __u8 bControlSize; + __u8 bSideBandProtocol; +} __attribute__((packed)); + +/* Formats - Audio Data Format Type I Codes */ + +#define UAC_FORMAT_TYPE_II_MPEG 0x1001 +#define UAC_FORMAT_TYPE_II_AC3 0x1002 + +struct uac_format_type_ii_discrete_descriptor { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDescriptorSubtype; + __u8 bFormatType; + __le16 wMaxBitRate; + __le16 wSamplesPerFrame; + __u8 bSamFreqType; + __u8 tSamFreq[][3]; +} __attribute__((packed)); + +struct uac_format_type_ii_ext_descriptor { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDescriptorSubtype; + __u8 bFormatType; + __u16 wMaxBitRate; + __u16 wSamplesPerFrame; + __u8 bHeaderLength; + __u8 bSideBandProtocol; +} __attribute__((packed)); + +/* type III */ +#define UAC_FORMAT_TYPE_III_IEC1937_AC3 0x2001 +#define UAC_FORMAT_TYPE_III_IEC1937_MPEG1_LAYER1 0x2002 +#define UAC_FORMAT_TYPE_III_IEC1937_MPEG2_NOEXT 0x2003 +#define UAC_FORMAT_TYPE_III_IEC1937_MPEG2_EXT 0x2004 +#define UAC_FORMAT_TYPE_III_IEC1937_MPEG2_LAYER1_LS 0x2005 +#define UAC_FORMAT_TYPE_III_IEC1937_MPEG2_LAYER23_LS 0x2006 + +/* Formats - A.2 Format Type Codes */ +#define UAC_FORMAT_TYPE_UNDEFINED 0x0 +#define UAC_FORMAT_TYPE_I 0x1 +#define UAC_FORMAT_TYPE_II 0x2 +#define UAC_FORMAT_TYPE_III 0x3 +#define UAC_EXT_FORMAT_TYPE_I 0x81 +#define UAC_EXT_FORMAT_TYPE_II 0x82 +#define UAC_EXT_FORMAT_TYPE_III 0x83 + +struct uac_iso_endpoint_descriptor { + __u8 bLength; /* in bytes: 7 */ + __u8 bDescriptorType; /* USB_DT_CS_ENDPOINT */ + __u8 bDescriptorSubtype; /* EP_GENERAL */ + __u8 bmAttributes; + __u8 bLockDelayUnits; + __le16 wLockDelay; +} __attribute__((packed)); +#define UAC_ISO_ENDPOINT_DESC_SIZE 7 + +#define UAC_EP_CS_ATTR_SAMPLE_RATE 0x01 +#define UAC_EP_CS_ATTR_PITCH_CONTROL 0x02 +#define UAC_EP_CS_ATTR_FILL_MAX 0x80 + +/* status word format (3.7.1.1) */ + +#define UAC1_STATUS_TYPE_ORIG_MASK 0x0f +#define UAC1_STATUS_TYPE_ORIG_AUDIO_CONTROL_IF 0x0 +#define UAC1_STATUS_TYPE_ORIG_AUDIO_STREAM_IF 0x1 +#define UAC1_STATUS_TYPE_ORIG_AUDIO_STREAM_EP 0x2 + +#define UAC1_STATUS_TYPE_IRQ_PENDING (1 << 7) +#define UAC1_STATUS_TYPE_MEM_CHANGED (1 << 6) + +struct uac1_status_word { + __u8 bStatusType; + __u8 bOriginator; +} __attribute__((packed)); + + +#endif /* _UAPI__LINUX_USB_AUDIO_H */ diff --git a/include/uapi/linux/usb/cdc.h b/include/uapi/linux/usb/cdc.h new file mode 100644 index 000000000000..81a927930bfd --- /dev/null +++ b/include/uapi/linux/usb/cdc.h @@ -0,0 +1,412 @@ +/* + * USB Communications Device Class (CDC) definitions + * + * CDC says how to talk to lots of different types of network adapters, + * notably ethernet adapters and various modems. It's used mostly with + * firmware based USB peripherals. + */ + +#ifndef __LINUX_USB_CDC_H +#define __LINUX_USB_CDC_H + +#include + +#define USB_CDC_SUBCLASS_ACM 0x02 +#define USB_CDC_SUBCLASS_ETHERNET 0x06 +#define USB_CDC_SUBCLASS_WHCM 0x08 +#define USB_CDC_SUBCLASS_DMM 0x09 +#define USB_CDC_SUBCLASS_MDLM 0x0a +#define USB_CDC_SUBCLASS_OBEX 0x0b +#define USB_CDC_SUBCLASS_EEM 0x0c +#define USB_CDC_SUBCLASS_NCM 0x0d + +#define USB_CDC_PROTO_NONE 0 + +#define USB_CDC_ACM_PROTO_AT_V25TER 1 +#define USB_CDC_ACM_PROTO_AT_PCCA101 2 +#define USB_CDC_ACM_PROTO_AT_PCCA101_WAKE 3 +#define USB_CDC_ACM_PROTO_AT_GSM 4 +#define USB_CDC_ACM_PROTO_AT_3G 5 +#define USB_CDC_ACM_PROTO_AT_CDMA 6 +#define USB_CDC_ACM_PROTO_VENDOR 0xff + +#define USB_CDC_PROTO_EEM 7 + +#define USB_CDC_NCM_PROTO_NTB 1 + +/*-------------------------------------------------------------------------*/ + +/* + * Class-Specific descriptors ... there are a couple dozen of them + */ + +#define USB_CDC_HEADER_TYPE 0x00 /* header_desc */ +#define USB_CDC_CALL_MANAGEMENT_TYPE 0x01 /* call_mgmt_descriptor */ +#define USB_CDC_ACM_TYPE 0x02 /* acm_descriptor */ +#define USB_CDC_UNION_TYPE 0x06 /* union_desc */ +#define USB_CDC_COUNTRY_TYPE 0x07 +#define USB_CDC_NETWORK_TERMINAL_TYPE 0x0a /* network_terminal_desc */ +#define USB_CDC_ETHERNET_TYPE 0x0f /* ether_desc */ +#define USB_CDC_WHCM_TYPE 0x11 +#define USB_CDC_MDLM_TYPE 0x12 /* mdlm_desc */ +#define USB_CDC_MDLM_DETAIL_TYPE 0x13 /* mdlm_detail_desc */ +#define USB_CDC_DMM_TYPE 0x14 +#define USB_CDC_OBEX_TYPE 0x15 +#define USB_CDC_NCM_TYPE 0x1a + +/* "Header Functional Descriptor" from CDC spec 5.2.3.1 */ +struct usb_cdc_header_desc { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDescriptorSubType; + + __le16 bcdCDC; +} __attribute__ ((packed)); + +/* "Call Management Descriptor" from CDC spec 5.2.3.2 */ +struct usb_cdc_call_mgmt_descriptor { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDescriptorSubType; + + __u8 bmCapabilities; +#define USB_CDC_CALL_MGMT_CAP_CALL_MGMT 0x01 +#define USB_CDC_CALL_MGMT_CAP_DATA_INTF 0x02 + + __u8 bDataInterface; +} __attribute__ ((packed)); + +/* "Abstract Control Management Descriptor" from CDC spec 5.2.3.3 */ +struct usb_cdc_acm_descriptor { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDescriptorSubType; + + __u8 bmCapabilities; +} __attribute__ ((packed)); + +/* capabilities from 5.2.3.3 */ + +#define USB_CDC_COMM_FEATURE 0x01 +#define USB_CDC_CAP_LINE 0x02 +#define USB_CDC_CAP_BRK 0x04 +#define USB_CDC_CAP_NOTIFY 0x08 + +/* "Union Functional Descriptor" from CDC spec 5.2.3.8 */ +struct usb_cdc_union_desc { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDescriptorSubType; + + __u8 bMasterInterface0; + __u8 bSlaveInterface0; + /* ... and there could be other slave interfaces */ +} __attribute__ ((packed)); + +/* "Country Selection Functional Descriptor" from CDC spec 5.2.3.9 */ +struct usb_cdc_country_functional_desc { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDescriptorSubType; + + __u8 iCountryCodeRelDate; + __le16 wCountyCode0; + /* ... and there can be a lot of country codes */ +} __attribute__ ((packed)); + +/* "Network Channel Terminal Functional Descriptor" from CDC spec 5.2.3.11 */ +struct usb_cdc_network_terminal_desc { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDescriptorSubType; + + __u8 bEntityId; + __u8 iName; + __u8 bChannelIndex; + __u8 bPhysicalInterface; +} __attribute__ ((packed)); + +/* "Ethernet Networking Functional Descriptor" from CDC spec 5.2.3.16 */ +struct usb_cdc_ether_desc { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDescriptorSubType; + + __u8 iMACAddress; + __le32 bmEthernetStatistics; + __le16 wMaxSegmentSize; + __le16 wNumberMCFilters; + __u8 bNumberPowerFilters; +} __attribute__ ((packed)); + +/* "Telephone Control Model Functional Descriptor" from CDC WMC spec 6.3..3 */ +struct usb_cdc_dmm_desc { + __u8 bFunctionLength; + __u8 bDescriptorType; + __u8 bDescriptorSubtype; + __u16 bcdVersion; + __le16 wMaxCommand; +} __attribute__ ((packed)); + +/* "MDLM Functional Descriptor" from CDC WMC spec 6.7.2.3 */ +struct usb_cdc_mdlm_desc { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDescriptorSubType; + + __le16 bcdVersion; + __u8 bGUID[16]; +} __attribute__ ((packed)); + +/* "MDLM Detail Functional Descriptor" from CDC WMC spec 6.7.2.4 */ +struct usb_cdc_mdlm_detail_desc { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDescriptorSubType; + + /* type is associated with mdlm_desc.bGUID */ + __u8 bGuidDescriptorType; + __u8 bDetailData[0]; +} __attribute__ ((packed)); + +/* "OBEX Control Model Functional Descriptor" */ +struct usb_cdc_obex_desc { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDescriptorSubType; + + __le16 bcdVersion; +} __attribute__ ((packed)); + +/* "NCM Control Model Functional Descriptor" */ +struct usb_cdc_ncm_desc { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDescriptorSubType; + + __le16 bcdNcmVersion; + __u8 bmNetworkCapabilities; +} __attribute__ ((packed)); +/*-------------------------------------------------------------------------*/ + +/* + * Class-Specific Control Requests (6.2) + * + * section 3.6.2.1 table 4 has the ACM profile, for modems. + * section 3.8.2 table 10 has the ethernet profile. + * + * Microsoft's RNDIS stack for Ethernet is a vendor-specific CDC ACM variant, + * heavily dependent on the encapsulated (proprietary) command mechanism. + */ + +#define USB_CDC_SEND_ENCAPSULATED_COMMAND 0x00 +#define USB_CDC_GET_ENCAPSULATED_RESPONSE 0x01 +#define USB_CDC_REQ_SET_LINE_CODING 0x20 +#define USB_CDC_REQ_GET_LINE_CODING 0x21 +#define USB_CDC_REQ_SET_CONTROL_LINE_STATE 0x22 +#define USB_CDC_REQ_SEND_BREAK 0x23 +#define USB_CDC_SET_ETHERNET_MULTICAST_FILTERS 0x40 +#define USB_CDC_SET_ETHERNET_PM_PATTERN_FILTER 0x41 +#define USB_CDC_GET_ETHERNET_PM_PATTERN_FILTER 0x42 +#define USB_CDC_SET_ETHERNET_PACKET_FILTER 0x43 +#define USB_CDC_GET_ETHERNET_STATISTIC 0x44 +#define USB_CDC_GET_NTB_PARAMETERS 0x80 +#define USB_CDC_GET_NET_ADDRESS 0x81 +#define USB_CDC_SET_NET_ADDRESS 0x82 +#define USB_CDC_GET_NTB_FORMAT 0x83 +#define USB_CDC_SET_NTB_FORMAT 0x84 +#define USB_CDC_GET_NTB_INPUT_SIZE 0x85 +#define USB_CDC_SET_NTB_INPUT_SIZE 0x86 +#define USB_CDC_GET_MAX_DATAGRAM_SIZE 0x87 +#define USB_CDC_SET_MAX_DATAGRAM_SIZE 0x88 +#define USB_CDC_GET_CRC_MODE 0x89 +#define USB_CDC_SET_CRC_MODE 0x8a + +/* Line Coding Structure from CDC spec 6.2.13 */ +struct usb_cdc_line_coding { + __le32 dwDTERate; + __u8 bCharFormat; +#define USB_CDC_1_STOP_BITS 0 +#define USB_CDC_1_5_STOP_BITS 1 +#define USB_CDC_2_STOP_BITS 2 + + __u8 bParityType; +#define USB_CDC_NO_PARITY 0 +#define USB_CDC_ODD_PARITY 1 +#define USB_CDC_EVEN_PARITY 2 +#define USB_CDC_MARK_PARITY 3 +#define USB_CDC_SPACE_PARITY 4 + + __u8 bDataBits; +} __attribute__ ((packed)); + +/* table 62; bits in multicast filter */ +#define USB_CDC_PACKET_TYPE_PROMISCUOUS (1 << 0) +#define USB_CDC_PACKET_TYPE_ALL_MULTICAST (1 << 1) /* no filter */ +#define USB_CDC_PACKET_TYPE_DIRECTED (1 << 2) +#define USB_CDC_PACKET_TYPE_BROADCAST (1 << 3) +#define USB_CDC_PACKET_TYPE_MULTICAST (1 << 4) /* filtered */ + + +/*-------------------------------------------------------------------------*/ + +/* + * Class-Specific Notifications (6.3) sent by interrupt transfers + * + * section 3.8.2 table 11 of the CDC spec lists Ethernet notifications + * section 3.6.2.1 table 5 specifies ACM notifications, accepted by RNDIS + * RNDIS also defines its own bit-incompatible notifications + */ + +#define USB_CDC_NOTIFY_NETWORK_CONNECTION 0x00 +#define USB_CDC_NOTIFY_RESPONSE_AVAILABLE 0x01 +#define USB_CDC_NOTIFY_SERIAL_STATE 0x20 +#define USB_CDC_NOTIFY_SPEED_CHANGE 0x2a + +struct usb_cdc_notification { + __u8 bmRequestType; + __u8 bNotificationType; + __le16 wValue; + __le16 wIndex; + __le16 wLength; +} __attribute__ ((packed)); + +struct usb_cdc_speed_change { + __le32 DLBitRRate; /* contains the downlink bit rate (IN pipe) */ + __le32 ULBitRate; /* contains the uplink bit rate (OUT pipe) */ +} __attribute__ ((packed)); + +/*-------------------------------------------------------------------------*/ + +/* + * Class Specific structures and constants + * + * CDC NCM NTB parameters structure, CDC NCM subclass 6.2.1 + * + */ + +struct usb_cdc_ncm_ntb_parameters { + __le16 wLength; + __le16 bmNtbFormatsSupported; + __le32 dwNtbInMaxSize; + __le16 wNdpInDivisor; + __le16 wNdpInPayloadRemainder; + __le16 wNdpInAlignment; + __le16 wPadding1; + __le32 dwNtbOutMaxSize; + __le16 wNdpOutDivisor; + __le16 wNdpOutPayloadRemainder; + __le16 wNdpOutAlignment; + __le16 wNtbOutMaxDatagrams; +} __attribute__ ((packed)); + +/* + * CDC NCM transfer headers, CDC NCM subclass 3.2 + */ + +#define USB_CDC_NCM_NTH16_SIGN 0x484D434E /* NCMH */ +#define USB_CDC_NCM_NTH32_SIGN 0x686D636E /* ncmh */ + +struct usb_cdc_ncm_nth16 { + __le32 dwSignature; + __le16 wHeaderLength; + __le16 wSequence; + __le16 wBlockLength; + __le16 wNdpIndex; +} __attribute__ ((packed)); + +struct usb_cdc_ncm_nth32 { + __le32 dwSignature; + __le16 wHeaderLength; + __le16 wSequence; + __le32 dwBlockLength; + __le32 dwNdpIndex; +} __attribute__ ((packed)); + +/* + * CDC NCM datagram pointers, CDC NCM subclass 3.3 + */ + +#define USB_CDC_NCM_NDP16_CRC_SIGN 0x314D434E /* NCM1 */ +#define USB_CDC_NCM_NDP16_NOCRC_SIGN 0x304D434E /* NCM0 */ +#define USB_CDC_NCM_NDP32_CRC_SIGN 0x316D636E /* ncm1 */ +#define USB_CDC_NCM_NDP32_NOCRC_SIGN 0x306D636E /* ncm0 */ + +/* 16-bit NCM Datagram Pointer Entry */ +struct usb_cdc_ncm_dpe16 { + __le16 wDatagramIndex; + __le16 wDatagramLength; +} __attribute__((__packed__)); + +/* 16-bit NCM Datagram Pointer Table */ +struct usb_cdc_ncm_ndp16 { + __le32 dwSignature; + __le16 wLength; + __le16 wNextNdpIndex; + struct usb_cdc_ncm_dpe16 dpe16[0]; +} __attribute__ ((packed)); + +/* 32-bit NCM Datagram Pointer Entry */ +struct usb_cdc_ncm_dpe32 { + __le32 dwDatagramIndex; + __le32 dwDatagramLength; +} __attribute__((__packed__)); + +/* 32-bit NCM Datagram Pointer Table */ +struct usb_cdc_ncm_ndp32 { + __le32 dwSignature; + __le16 wLength; + __le16 wReserved6; + __le32 dwNextNdpIndex; + __le32 dwReserved12; + struct usb_cdc_ncm_dpe32 dpe32[0]; +} __attribute__ ((packed)); + +/* CDC NCM subclass 3.2.1 and 3.2.2 */ +#define USB_CDC_NCM_NDP16_INDEX_MIN 0x000C +#define USB_CDC_NCM_NDP32_INDEX_MIN 0x0010 + +/* CDC NCM subclass 3.3.3 Datagram Formatting */ +#define USB_CDC_NCM_DATAGRAM_FORMAT_CRC 0x30 +#define USB_CDC_NCM_DATAGRAM_FORMAT_NOCRC 0X31 + +/* CDC NCM subclass 4.2 NCM Communications Interface Protocol Code */ +#define USB_CDC_NCM_PROTO_CODE_NO_ENCAP_COMMANDS 0x00 +#define USB_CDC_NCM_PROTO_CODE_EXTERN_PROTO 0xFE + +/* CDC NCM subclass 5.2.1 NCM Functional Descriptor, bmNetworkCapabilities */ +#define USB_CDC_NCM_NCAP_ETH_FILTER (1 << 0) +#define USB_CDC_NCM_NCAP_NET_ADDRESS (1 << 1) +#define USB_CDC_NCM_NCAP_ENCAP_COMMAND (1 << 2) +#define USB_CDC_NCM_NCAP_MAX_DATAGRAM_SIZE (1 << 3) +#define USB_CDC_NCM_NCAP_CRC_MODE (1 << 4) +#define USB_CDC_NCM_NCAP_NTB_INPUT_SIZE (1 << 5) + +/* CDC NCM subclass Table 6-3: NTB Parameter Structure */ +#define USB_CDC_NCM_NTB16_SUPPORTED (1 << 0) +#define USB_CDC_NCM_NTB32_SUPPORTED (1 << 1) + +/* CDC NCM subclass Table 6-3: NTB Parameter Structure */ +#define USB_CDC_NCM_NDP_ALIGN_MIN_SIZE 0x04 +#define USB_CDC_NCM_NTB_MAX_LENGTH 0x1C + +/* CDC NCM subclass 6.2.5 SetNtbFormat */ +#define USB_CDC_NCM_NTB16_FORMAT 0x00 +#define USB_CDC_NCM_NTB32_FORMAT 0x01 + +/* CDC NCM subclass 6.2.7 SetNtbInputSize */ +#define USB_CDC_NCM_NTB_MIN_IN_SIZE 2048 +#define USB_CDC_NCM_NTB_MIN_OUT_SIZE 2048 + +/* NTB Input Size Structure */ +struct usb_cdc_ncm_ndp_input_size { + __le32 dwNtbInMaxSize; + __le16 wNtbInMaxDatagrams; + __le16 wReserved; +} __attribute__ ((packed)); + +/* CDC NCM subclass 6.2.11 SetCrcMode */ +#define USB_CDC_NCM_CRC_NOT_APPENDED 0x00 +#define USB_CDC_NCM_CRC_APPENDED 0x01 + +#endif /* __LINUX_USB_CDC_H */ diff --git a/include/uapi/linux/usb/ch11.h b/include/uapi/linux/usb/ch11.h new file mode 100644 index 000000000000..7692dc69ccf7 --- /dev/null +++ b/include/uapi/linux/usb/ch11.h @@ -0,0 +1,266 @@ +/* + * This file holds Hub protocol constants and data structures that are + * defined in chapter 11 (Hub Specification) of the USB 2.0 specification. + * + * It is used/shared between the USB core, the HCDs and couple of other USB + * drivers. + */ + +#ifndef __LINUX_CH11_H +#define __LINUX_CH11_H + +#include /* __u8 etc */ + +/* + * Hub request types + */ + +#define USB_RT_HUB (USB_TYPE_CLASS | USB_RECIP_DEVICE) +#define USB_RT_PORT (USB_TYPE_CLASS | USB_RECIP_OTHER) + +/* + * Hub class requests + * See USB 2.0 spec Table 11-16 + */ +#define HUB_CLEAR_TT_BUFFER 8 +#define HUB_RESET_TT 9 +#define HUB_GET_TT_STATE 10 +#define HUB_STOP_TT 11 + +/* + * Hub class additional requests defined by USB 3.0 spec + * See USB 3.0 spec Table 10-6 + */ +#define HUB_SET_DEPTH 12 +#define HUB_GET_PORT_ERR_COUNT 13 + +/* + * Hub Class feature numbers + * See USB 2.0 spec Table 11-17 + */ +#define C_HUB_LOCAL_POWER 0 +#define C_HUB_OVER_CURRENT 1 + +/* + * Port feature numbers + * See USB 2.0 spec Table 11-17 + */ +#define USB_PORT_FEAT_CONNECTION 0 +#define USB_PORT_FEAT_ENABLE 1 +#define USB_PORT_FEAT_SUSPEND 2 /* L2 suspend */ +#define USB_PORT_FEAT_OVER_CURRENT 3 +#define USB_PORT_FEAT_RESET 4 +#define USB_PORT_FEAT_L1 5 /* L1 suspend */ +#define USB_PORT_FEAT_POWER 8 +#define USB_PORT_FEAT_LOWSPEED 9 /* Should never be used */ +#define USB_PORT_FEAT_C_CONNECTION 16 +#define USB_PORT_FEAT_C_ENABLE 17 +#define USB_PORT_FEAT_C_SUSPEND 18 +#define USB_PORT_FEAT_C_OVER_CURRENT 19 +#define USB_PORT_FEAT_C_RESET 20 +#define USB_PORT_FEAT_TEST 21 +#define USB_PORT_FEAT_INDICATOR 22 +#define USB_PORT_FEAT_C_PORT_L1 23 + +/* + * Port feature selectors added by USB 3.0 spec. + * See USB 3.0 spec Table 10-7 + */ +#define USB_PORT_FEAT_LINK_STATE 5 +#define USB_PORT_FEAT_U1_TIMEOUT 23 +#define USB_PORT_FEAT_U2_TIMEOUT 24 +#define USB_PORT_FEAT_C_PORT_LINK_STATE 25 +#define USB_PORT_FEAT_C_PORT_CONFIG_ERROR 26 +#define USB_PORT_FEAT_REMOTE_WAKE_MASK 27 +#define USB_PORT_FEAT_BH_PORT_RESET 28 +#define USB_PORT_FEAT_C_BH_PORT_RESET 29 +#define USB_PORT_FEAT_FORCE_LINKPM_ACCEPT 30 + +#define USB_PORT_LPM_TIMEOUT(p) (((p) & 0xff) << 8) + +/* USB 3.0 hub remote wake mask bits, see table 10-14 */ +#define USB_PORT_FEAT_REMOTE_WAKE_CONNECT (1 << 8) +#define USB_PORT_FEAT_REMOTE_WAKE_DISCONNECT (1 << 9) +#define USB_PORT_FEAT_REMOTE_WAKE_OVER_CURRENT (1 << 10) + +/* + * Hub Status and Hub Change results + * See USB 2.0 spec Table 11-19 and Table 11-20 + */ +struct usb_port_status { + __le16 wPortStatus; + __le16 wPortChange; +} __attribute__ ((packed)); + +/* + * wPortStatus bit field + * See USB 2.0 spec Table 11-21 + */ +#define USB_PORT_STAT_CONNECTION 0x0001 +#define USB_PORT_STAT_ENABLE 0x0002 +#define USB_PORT_STAT_SUSPEND 0x0004 +#define USB_PORT_STAT_OVERCURRENT 0x0008 +#define USB_PORT_STAT_RESET 0x0010 +#define USB_PORT_STAT_L1 0x0020 +/* bits 6 to 7 are reserved */ +#define USB_PORT_STAT_POWER 0x0100 +#define USB_PORT_STAT_LOW_SPEED 0x0200 +#define USB_PORT_STAT_HIGH_SPEED 0x0400 +#define USB_PORT_STAT_TEST 0x0800 +#define USB_PORT_STAT_INDICATOR 0x1000 +/* bits 13 to 15 are reserved */ + +/* + * Additions to wPortStatus bit field from USB 3.0 + * See USB 3.0 spec Table 10-10 + */ +#define USB_PORT_STAT_LINK_STATE 0x01e0 +#define USB_SS_PORT_STAT_POWER 0x0200 +#define USB_SS_PORT_STAT_SPEED 0x1c00 +#define USB_PORT_STAT_SPEED_5GBPS 0x0000 +/* Valid only if port is enabled */ +/* Bits that are the same from USB 2.0 */ +#define USB_SS_PORT_STAT_MASK (USB_PORT_STAT_CONNECTION | \ + USB_PORT_STAT_ENABLE | \ + USB_PORT_STAT_OVERCURRENT | \ + USB_PORT_STAT_RESET) + +/* + * Definitions for PORT_LINK_STATE values + * (bits 5-8) in wPortStatus + */ +#define USB_SS_PORT_LS_U0 0x0000 +#define USB_SS_PORT_LS_U1 0x0020 +#define USB_SS_PORT_LS_U2 0x0040 +#define USB_SS_PORT_LS_U3 0x0060 +#define USB_SS_PORT_LS_SS_DISABLED 0x0080 +#define USB_SS_PORT_LS_RX_DETECT 0x00a0 +#define USB_SS_PORT_LS_SS_INACTIVE 0x00c0 +#define USB_SS_PORT_LS_POLLING 0x00e0 +#define USB_SS_PORT_LS_RECOVERY 0x0100 +#define USB_SS_PORT_LS_HOT_RESET 0x0120 +#define USB_SS_PORT_LS_COMP_MOD 0x0140 +#define USB_SS_PORT_LS_LOOPBACK 0x0160 + +/* + * wPortChange bit field + * See USB 2.0 spec Table 11-22 and USB 2.0 LPM ECN Table-4.10 + * Bits 0 to 5 shown, bits 6 to 15 are reserved + */ +#define USB_PORT_STAT_C_CONNECTION 0x0001 +#define USB_PORT_STAT_C_ENABLE 0x0002 +#define USB_PORT_STAT_C_SUSPEND 0x0004 +#define USB_PORT_STAT_C_OVERCURRENT 0x0008 +#define USB_PORT_STAT_C_RESET 0x0010 +#define USB_PORT_STAT_C_L1 0x0020 +/* + * USB 3.0 wPortChange bit fields + * See USB 3.0 spec Table 10-11 + */ +#define USB_PORT_STAT_C_BH_RESET 0x0020 +#define USB_PORT_STAT_C_LINK_STATE 0x0040 +#define USB_PORT_STAT_C_CONFIG_ERROR 0x0080 + +/* + * wHubCharacteristics (masks) + * See USB 2.0 spec Table 11-13, offset 3 + */ +#define HUB_CHAR_LPSM 0x0003 /* Logical Power Switching Mode mask */ +#define HUB_CHAR_COMMON_LPSM 0x0000 /* All ports power control at once */ +#define HUB_CHAR_INDV_PORT_LPSM 0x0001 /* per-port power control */ +#define HUB_CHAR_NO_LPSM 0x0002 /* no power switching */ + +#define HUB_CHAR_COMPOUND 0x0004 /* hub is part of a compound device */ + +#define HUB_CHAR_OCPM 0x0018 /* Over-Current Protection Mode mask */ +#define HUB_CHAR_COMMON_OCPM 0x0000 /* All ports Over-Current reporting */ +#define HUB_CHAR_INDV_PORT_OCPM 0x0008 /* per-port Over-current reporting */ +#define HUB_CHAR_NO_OCPM 0x0010 /* No Over-current Protection support */ + +#define HUB_CHAR_TTTT 0x0060 /* TT Think Time mask */ +#define HUB_CHAR_PORTIND 0x0080 /* per-port indicators (LEDs) */ + +struct usb_hub_status { + __le16 wHubStatus; + __le16 wHubChange; +} __attribute__ ((packed)); + +/* + * Hub Status & Hub Change bit masks + * See USB 2.0 spec Table 11-19 and Table 11-20 + * Bits 0 and 1 for wHubStatus and wHubChange + * Bits 2 to 15 are reserved for both + */ +#define HUB_STATUS_LOCAL_POWER 0x0001 +#define HUB_STATUS_OVERCURRENT 0x0002 +#define HUB_CHANGE_LOCAL_POWER 0x0001 +#define HUB_CHANGE_OVERCURRENT 0x0002 + + +/* + * Hub descriptor + * See USB 2.0 spec Table 11-13 + */ + +#define USB_DT_HUB (USB_TYPE_CLASS | 0x09) +#define USB_DT_SS_HUB (USB_TYPE_CLASS | 0x0a) +#define USB_DT_HUB_NONVAR_SIZE 7 +#define USB_DT_SS_HUB_SIZE 12 + +/* + * Hub Device descriptor + * USB Hub class device protocols + */ + +#define USB_HUB_PR_FS 0 /* Full speed hub */ +#define USB_HUB_PR_HS_NO_TT 0 /* Hi-speed hub without TT */ +#define USB_HUB_PR_HS_SINGLE_TT 1 /* Hi-speed hub with single TT */ +#define USB_HUB_PR_HS_MULTI_TT 2 /* Hi-speed hub with multiple TT */ +#define USB_HUB_PR_SS 3 /* Super speed hub */ + +struct usb_hub_descriptor { + __u8 bDescLength; + __u8 bDescriptorType; + __u8 bNbrPorts; + __le16 wHubCharacteristics; + __u8 bPwrOn2PwrGood; + __u8 bHubContrCurrent; + + /* 2.0 and 3.0 hubs differ here */ + union { + struct { + /* add 1 bit for hub status change; round to bytes */ + __u8 DeviceRemovable[(USB_MAXCHILDREN + 1 + 7) / 8]; + __u8 PortPwrCtrlMask[(USB_MAXCHILDREN + 1 + 7) / 8]; + } __attribute__ ((packed)) hs; + + struct { + __u8 bHubHdrDecLat; + __le16 wHubDelay; + __le16 DeviceRemovable; + } __attribute__ ((packed)) ss; + } u; +} __attribute__ ((packed)); + +/* port indicator status selectors, tables 11-7 and 11-25 */ +#define HUB_LED_AUTO 0 +#define HUB_LED_AMBER 1 +#define HUB_LED_GREEN 2 +#define HUB_LED_OFF 3 + +enum hub_led_mode { + INDICATOR_AUTO = 0, + INDICATOR_CYCLE, + /* software blinks for attention: software, hardware, reserved */ + INDICATOR_GREEN_BLINK, INDICATOR_GREEN_BLINK_OFF, + INDICATOR_AMBER_BLINK, INDICATOR_AMBER_BLINK_OFF, + INDICATOR_ALT_BLINK, INDICATOR_ALT_BLINK_OFF +} __attribute__ ((packed)); + +/* Transaction Translator Think Times, in bits */ +#define HUB_TTTT_8_BITS 0x00 +#define HUB_TTTT_16_BITS 0x20 +#define HUB_TTTT_24_BITS 0x40 +#define HUB_TTTT_32_BITS 0x60 + +#endif /* __LINUX_CH11_H */ diff --git a/include/uapi/linux/usb/ch9.h b/include/uapi/linux/usb/ch9.h new file mode 100644 index 000000000000..50598472dc41 --- /dev/null +++ b/include/uapi/linux/usb/ch9.h @@ -0,0 +1,993 @@ +/* + * This file holds USB constants and structures that are needed for + * USB device APIs. These are used by the USB device model, which is + * defined in chapter 9 of the USB 2.0 specification and in the + * Wireless USB 1.0 (spread around). Linux has several APIs in C that + * need these: + * + * - the master/host side Linux-USB kernel driver API; + * - the "usbfs" user space API; and + * - the Linux "gadget" slave/device/peripheral side driver API. + * + * USB 2.0 adds an additional "On The Go" (OTG) mode, which lets systems + * act either as a USB master/host or as a USB slave/device. That means + * the master and slave side APIs benefit from working well together. + * + * There's also "Wireless USB", using low power short range radios for + * peripheral interconnection but otherwise building on the USB framework. + * + * Note all descriptors are declared '__attribute__((packed))' so that: + * + * [a] they never get padded, either internally (USB spec writers + * probably handled that) or externally; + * + * [b] so that accessing bigger-than-a-bytes fields will never + * generate bus errors on any platform, even when the location of + * its descriptor inside a bundle isn't "naturally aligned", and + * + * [c] for consistency, removing all doubt even when it appears to + * someone that the two other points are non-issues for that + * particular descriptor type. + */ + +#ifndef _UAPI__LINUX_USB_CH9_H +#define _UAPI__LINUX_USB_CH9_H + +#include /* __u8 etc */ +#include /* le16_to_cpu */ + +/*-------------------------------------------------------------------------*/ + +/* CONTROL REQUEST SUPPORT */ + +/* + * USB directions + * + * This bit flag is used in endpoint descriptors' bEndpointAddress field. + * It's also one of three fields in control requests bRequestType. + */ +#define USB_DIR_OUT 0 /* to device */ +#define USB_DIR_IN 0x80 /* to host */ + +/* + * USB types, the second of three bRequestType fields + */ +#define USB_TYPE_MASK (0x03 << 5) +#define USB_TYPE_STANDARD (0x00 << 5) +#define USB_TYPE_CLASS (0x01 << 5) +#define USB_TYPE_VENDOR (0x02 << 5) +#define USB_TYPE_RESERVED (0x03 << 5) + +/* + * USB recipients, the third of three bRequestType fields + */ +#define USB_RECIP_MASK 0x1f +#define USB_RECIP_DEVICE 0x00 +#define USB_RECIP_INTERFACE 0x01 +#define USB_RECIP_ENDPOINT 0x02 +#define USB_RECIP_OTHER 0x03 +/* From Wireless USB 1.0 */ +#define USB_RECIP_PORT 0x04 +#define USB_RECIP_RPIPE 0x05 + +/* + * Standard requests, for the bRequest field of a SETUP packet. + * + * These are qualified by the bRequestType field, so that for example + * TYPE_CLASS or TYPE_VENDOR specific feature flags could be retrieved + * by a GET_STATUS request. + */ +#define USB_REQ_GET_STATUS 0x00 +#define USB_REQ_CLEAR_FEATURE 0x01 +#define USB_REQ_SET_FEATURE 0x03 +#define USB_REQ_SET_ADDRESS 0x05 +#define USB_REQ_GET_DESCRIPTOR 0x06 +#define USB_REQ_SET_DESCRIPTOR 0x07 +#define USB_REQ_GET_CONFIGURATION 0x08 +#define USB_REQ_SET_CONFIGURATION 0x09 +#define USB_REQ_GET_INTERFACE 0x0A +#define USB_REQ_SET_INTERFACE 0x0B +#define USB_REQ_SYNCH_FRAME 0x0C +#define USB_REQ_SET_SEL 0x30 +#define USB_REQ_SET_ISOCH_DELAY 0x31 + +#define USB_REQ_SET_ENCRYPTION 0x0D /* Wireless USB */ +#define USB_REQ_GET_ENCRYPTION 0x0E +#define USB_REQ_RPIPE_ABORT 0x0E +#define USB_REQ_SET_HANDSHAKE 0x0F +#define USB_REQ_RPIPE_RESET 0x0F +#define USB_REQ_GET_HANDSHAKE 0x10 +#define USB_REQ_SET_CONNECTION 0x11 +#define USB_REQ_SET_SECURITY_DATA 0x12 +#define USB_REQ_GET_SECURITY_DATA 0x13 +#define USB_REQ_SET_WUSB_DATA 0x14 +#define USB_REQ_LOOPBACK_DATA_WRITE 0x15 +#define USB_REQ_LOOPBACK_DATA_READ 0x16 +#define USB_REQ_SET_INTERFACE_DS 0x17 + +/* The Link Power Management (LPM) ECN defines USB_REQ_TEST_AND_SET command, + * used by hubs to put ports into a new L1 suspend state, except that it + * forgot to define its number ... + */ + +/* + * USB feature flags are written using USB_REQ_{CLEAR,SET}_FEATURE, and + * are read as a bit array returned by USB_REQ_GET_STATUS. (So there + * are at most sixteen features of each type.) Hubs may also support a + * new USB_REQ_TEST_AND_SET_FEATURE to put ports into L1 suspend. + */ +#define USB_DEVICE_SELF_POWERED 0 /* (read only) */ +#define USB_DEVICE_REMOTE_WAKEUP 1 /* dev may initiate wakeup */ +#define USB_DEVICE_TEST_MODE 2 /* (wired high speed only) */ +#define USB_DEVICE_BATTERY 2 /* (wireless) */ +#define USB_DEVICE_B_HNP_ENABLE 3 /* (otg) dev may initiate HNP */ +#define USB_DEVICE_WUSB_DEVICE 3 /* (wireless)*/ +#define USB_DEVICE_A_HNP_SUPPORT 4 /* (otg) RH port supports HNP */ +#define USB_DEVICE_A_ALT_HNP_SUPPORT 5 /* (otg) other RH port does */ +#define USB_DEVICE_DEBUG_MODE 6 /* (special devices only) */ + +/* + * Test Mode Selectors + * See USB 2.0 spec Table 9-7 + */ +#define TEST_J 1 +#define TEST_K 2 +#define TEST_SE0_NAK 3 +#define TEST_PACKET 4 +#define TEST_FORCE_EN 5 + +/* + * New Feature Selectors as added by USB 3.0 + * See USB 3.0 spec Table 9-6 + */ +#define USB_DEVICE_U1_ENABLE 48 /* dev may initiate U1 transition */ +#define USB_DEVICE_U2_ENABLE 49 /* dev may initiate U2 transition */ +#define USB_DEVICE_LTM_ENABLE 50 /* dev may send LTM */ +#define USB_INTRF_FUNC_SUSPEND 0 /* function suspend */ + +#define USB_INTR_FUNC_SUSPEND_OPT_MASK 0xFF00 +/* + * Suspend Options, Table 9-7 USB 3.0 spec + */ +#define USB_INTRF_FUNC_SUSPEND_LP (1 << (8 + 0)) +#define USB_INTRF_FUNC_SUSPEND_RW (1 << (8 + 1)) + +#define USB_ENDPOINT_HALT 0 /* IN/OUT will STALL */ + +/* Bit array elements as returned by the USB_REQ_GET_STATUS request. */ +#define USB_DEV_STAT_U1_ENABLED 2 /* transition into U1 state */ +#define USB_DEV_STAT_U2_ENABLED 3 /* transition into U2 state */ +#define USB_DEV_STAT_LTM_ENABLED 4 /* Latency tolerance messages */ + +/** + * struct usb_ctrlrequest - SETUP data for a USB device control request + * @bRequestType: matches the USB bmRequestType field + * @bRequest: matches the USB bRequest field + * @wValue: matches the USB wValue field (le16 byte order) + * @wIndex: matches the USB wIndex field (le16 byte order) + * @wLength: matches the USB wLength field (le16 byte order) + * + * This structure is used to send control requests to a USB device. It matches + * the different fields of the USB 2.0 Spec section 9.3, table 9-2. See the + * USB spec for a fuller description of the different fields, and what they are + * used for. + * + * Note that the driver for any interface can issue control requests. + * For most devices, interfaces don't coordinate with each other, so + * such requests may be made at any time. + */ +struct usb_ctrlrequest { + __u8 bRequestType; + __u8 bRequest; + __le16 wValue; + __le16 wIndex; + __le16 wLength; +} __attribute__ ((packed)); + +/*-------------------------------------------------------------------------*/ + +/* + * STANDARD DESCRIPTORS ... as returned by GET_DESCRIPTOR, or + * (rarely) accepted by SET_DESCRIPTOR. + * + * Note that all multi-byte values here are encoded in little endian + * byte order "on the wire". Within the kernel and when exposed + * through the Linux-USB APIs, they are not converted to cpu byte + * order; it is the responsibility of the client code to do this. + * The single exception is when device and configuration descriptors (but + * not other descriptors) are read from usbfs (i.e. /proc/bus/usb/BBB/DDD); + * in this case the fields are converted to host endianness by the kernel. + */ + +/* + * Descriptor types ... USB 2.0 spec table 9.5 + */ +#define USB_DT_DEVICE 0x01 +#define USB_DT_CONFIG 0x02 +#define USB_DT_STRING 0x03 +#define USB_DT_INTERFACE 0x04 +#define USB_DT_ENDPOINT 0x05 +#define USB_DT_DEVICE_QUALIFIER 0x06 +#define USB_DT_OTHER_SPEED_CONFIG 0x07 +#define USB_DT_INTERFACE_POWER 0x08 +/* these are from a minor usb 2.0 revision (ECN) */ +#define USB_DT_OTG 0x09 +#define USB_DT_DEBUG 0x0a +#define USB_DT_INTERFACE_ASSOCIATION 0x0b +/* these are from the Wireless USB spec */ +#define USB_DT_SECURITY 0x0c +#define USB_DT_KEY 0x0d +#define USB_DT_ENCRYPTION_TYPE 0x0e +#define USB_DT_BOS 0x0f +#define USB_DT_DEVICE_CAPABILITY 0x10 +#define USB_DT_WIRELESS_ENDPOINT_COMP 0x11 +#define USB_DT_WIRE_ADAPTER 0x21 +#define USB_DT_RPIPE 0x22 +#define USB_DT_CS_RADIO_CONTROL 0x23 +/* From the T10 UAS specification */ +#define USB_DT_PIPE_USAGE 0x24 +/* From the USB 3.0 spec */ +#define USB_DT_SS_ENDPOINT_COMP 0x30 + +/* Conventional codes for class-specific descriptors. The convention is + * defined in the USB "Common Class" Spec (3.11). Individual class specs + * are authoritative for their usage, not the "common class" writeup. + */ +#define USB_DT_CS_DEVICE (USB_TYPE_CLASS | USB_DT_DEVICE) +#define USB_DT_CS_CONFIG (USB_TYPE_CLASS | USB_DT_CONFIG) +#define USB_DT_CS_STRING (USB_TYPE_CLASS | USB_DT_STRING) +#define USB_DT_CS_INTERFACE (USB_TYPE_CLASS | USB_DT_INTERFACE) +#define USB_DT_CS_ENDPOINT (USB_TYPE_CLASS | USB_DT_ENDPOINT) + +/* All standard descriptors have these 2 fields at the beginning */ +struct usb_descriptor_header { + __u8 bLength; + __u8 bDescriptorType; +} __attribute__ ((packed)); + + +/*-------------------------------------------------------------------------*/ + +/* USB_DT_DEVICE: Device descriptor */ +struct usb_device_descriptor { + __u8 bLength; + __u8 bDescriptorType; + + __le16 bcdUSB; + __u8 bDeviceClass; + __u8 bDeviceSubClass; + __u8 bDeviceProtocol; + __u8 bMaxPacketSize0; + __le16 idVendor; + __le16 idProduct; + __le16 bcdDevice; + __u8 iManufacturer; + __u8 iProduct; + __u8 iSerialNumber; + __u8 bNumConfigurations; +} __attribute__ ((packed)); + +#define USB_DT_DEVICE_SIZE 18 + + +/* + * Device and/or Interface Class codes + * as found in bDeviceClass or bInterfaceClass + * and defined by www.usb.org documents + */ +#define USB_CLASS_PER_INTERFACE 0 /* for DeviceClass */ +#define USB_CLASS_AUDIO 1 +#define USB_CLASS_COMM 2 +#define USB_CLASS_HID 3 +#define USB_CLASS_PHYSICAL 5 +#define USB_CLASS_STILL_IMAGE 6 +#define USB_CLASS_PRINTER 7 +#define USB_CLASS_MASS_STORAGE 8 +#define USB_CLASS_HUB 9 +#define USB_CLASS_CDC_DATA 0x0a +#define USB_CLASS_CSCID 0x0b /* chip+ smart card */ +#define USB_CLASS_CONTENT_SEC 0x0d /* content security */ +#define USB_CLASS_VIDEO 0x0e +#define USB_CLASS_WIRELESS_CONTROLLER 0xe0 +#define USB_CLASS_MISC 0xef +#define USB_CLASS_APP_SPEC 0xfe +#define USB_CLASS_VENDOR_SPEC 0xff + +#define USB_SUBCLASS_VENDOR_SPEC 0xff + +/*-------------------------------------------------------------------------*/ + +/* USB_DT_CONFIG: Configuration descriptor information. + * + * USB_DT_OTHER_SPEED_CONFIG is the same descriptor, except that the + * descriptor type is different. Highspeed-capable devices can look + * different depending on what speed they're currently running. Only + * devices with a USB_DT_DEVICE_QUALIFIER have any OTHER_SPEED_CONFIG + * descriptors. + */ +struct usb_config_descriptor { + __u8 bLength; + __u8 bDescriptorType; + + __le16 wTotalLength; + __u8 bNumInterfaces; + __u8 bConfigurationValue; + __u8 iConfiguration; + __u8 bmAttributes; + __u8 bMaxPower; +} __attribute__ ((packed)); + +#define USB_DT_CONFIG_SIZE 9 + +/* from config descriptor bmAttributes */ +#define USB_CONFIG_ATT_ONE (1 << 7) /* must be set */ +#define USB_CONFIG_ATT_SELFPOWER (1 << 6) /* self powered */ +#define USB_CONFIG_ATT_WAKEUP (1 << 5) /* can wakeup */ +#define USB_CONFIG_ATT_BATTERY (1 << 4) /* battery powered */ + +/*-------------------------------------------------------------------------*/ + +/* USB_DT_STRING: String descriptor */ +struct usb_string_descriptor { + __u8 bLength; + __u8 bDescriptorType; + + __le16 wData[1]; /* UTF-16LE encoded */ +} __attribute__ ((packed)); + +/* note that "string" zero is special, it holds language codes that + * the device supports, not Unicode characters. + */ + +/*-------------------------------------------------------------------------*/ + +/* USB_DT_INTERFACE: Interface descriptor */ +struct usb_interface_descriptor { + __u8 bLength; + __u8 bDescriptorType; + + __u8 bInterfaceNumber; + __u8 bAlternateSetting; + __u8 bNumEndpoints; + __u8 bInterfaceClass; + __u8 bInterfaceSubClass; + __u8 bInterfaceProtocol; + __u8 iInterface; +} __attribute__ ((packed)); + +#define USB_DT_INTERFACE_SIZE 9 + +/*-------------------------------------------------------------------------*/ + +/* USB_DT_ENDPOINT: Endpoint descriptor */ +struct usb_endpoint_descriptor { + __u8 bLength; + __u8 bDescriptorType; + + __u8 bEndpointAddress; + __u8 bmAttributes; + __le16 wMaxPacketSize; + __u8 bInterval; + + /* NOTE: these two are _only_ in audio endpoints. */ + /* use USB_DT_ENDPOINT*_SIZE in bLength, not sizeof. */ + __u8 bRefresh; + __u8 bSynchAddress; +} __attribute__ ((packed)); + +#define USB_DT_ENDPOINT_SIZE 7 +#define USB_DT_ENDPOINT_AUDIO_SIZE 9 /* Audio extension */ + + +/* + * Endpoints + */ +#define USB_ENDPOINT_NUMBER_MASK 0x0f /* in bEndpointAddress */ +#define USB_ENDPOINT_DIR_MASK 0x80 + +#define USB_ENDPOINT_XFERTYPE_MASK 0x03 /* in bmAttributes */ +#define USB_ENDPOINT_XFER_CONTROL 0 +#define USB_ENDPOINT_XFER_ISOC 1 +#define USB_ENDPOINT_XFER_BULK 2 +#define USB_ENDPOINT_XFER_INT 3 +#define USB_ENDPOINT_MAX_ADJUSTABLE 0x80 + +/* The USB 3.0 spec redefines bits 5:4 of bmAttributes as interrupt ep type. */ +#define USB_ENDPOINT_INTRTYPE 0x30 +#define USB_ENDPOINT_INTR_PERIODIC (0 << 4) +#define USB_ENDPOINT_INTR_NOTIFICATION (1 << 4) + +#define USB_ENDPOINT_SYNCTYPE 0x0c +#define USB_ENDPOINT_SYNC_NONE (0 << 2) +#define USB_ENDPOINT_SYNC_ASYNC (1 << 2) +#define USB_ENDPOINT_SYNC_ADAPTIVE (2 << 2) +#define USB_ENDPOINT_SYNC_SYNC (3 << 2) + +#define USB_ENDPOINT_USAGE_MASK 0x30 +#define USB_ENDPOINT_USAGE_DATA 0x00 +#define USB_ENDPOINT_USAGE_FEEDBACK 0x10 +#define USB_ENDPOINT_USAGE_IMPLICIT_FB 0x20 /* Implicit feedback Data endpoint */ + +/*-------------------------------------------------------------------------*/ + +/** + * usb_endpoint_num - get the endpoint's number + * @epd: endpoint to be checked + * + * Returns @epd's number: 0 to 15. + */ +static inline int usb_endpoint_num(const struct usb_endpoint_descriptor *epd) +{ + return epd->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK; +} + +/** + * usb_endpoint_type - get the endpoint's transfer type + * @epd: endpoint to be checked + * + * Returns one of USB_ENDPOINT_XFER_{CONTROL, ISOC, BULK, INT} according + * to @epd's transfer type. + */ +static inline int usb_endpoint_type(const struct usb_endpoint_descriptor *epd) +{ + return epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK; +} + +/** + * usb_endpoint_dir_in - check if the endpoint has IN direction + * @epd: endpoint to be checked + * + * Returns true if the endpoint is of type IN, otherwise it returns false. + */ +static inline int usb_endpoint_dir_in(const struct usb_endpoint_descriptor *epd) +{ + return ((epd->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN); +} + +/** + * usb_endpoint_dir_out - check if the endpoint has OUT direction + * @epd: endpoint to be checked + * + * Returns true if the endpoint is of type OUT, otherwise it returns false. + */ +static inline int usb_endpoint_dir_out( + const struct usb_endpoint_descriptor *epd) +{ + return ((epd->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT); +} + +/** + * usb_endpoint_xfer_bulk - check if the endpoint has bulk transfer type + * @epd: endpoint to be checked + * + * Returns true if the endpoint is of type bulk, otherwise it returns false. + */ +static inline int usb_endpoint_xfer_bulk( + const struct usb_endpoint_descriptor *epd) +{ + return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == + USB_ENDPOINT_XFER_BULK); +} + +/** + * usb_endpoint_xfer_control - check if the endpoint has control transfer type + * @epd: endpoint to be checked + * + * Returns true if the endpoint is of type control, otherwise it returns false. + */ +static inline int usb_endpoint_xfer_control( + const struct usb_endpoint_descriptor *epd) +{ + return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == + USB_ENDPOINT_XFER_CONTROL); +} + +/** + * usb_endpoint_xfer_int - check if the endpoint has interrupt transfer type + * @epd: endpoint to be checked + * + * Returns true if the endpoint is of type interrupt, otherwise it returns + * false. + */ +static inline int usb_endpoint_xfer_int( + const struct usb_endpoint_descriptor *epd) +{ + return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == + USB_ENDPOINT_XFER_INT); +} + +/** + * usb_endpoint_xfer_isoc - check if the endpoint has isochronous transfer type + * @epd: endpoint to be checked + * + * Returns true if the endpoint is of type isochronous, otherwise it returns + * false. + */ +static inline int usb_endpoint_xfer_isoc( + const struct usb_endpoint_descriptor *epd) +{ + return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == + USB_ENDPOINT_XFER_ISOC); +} + +/** + * usb_endpoint_is_bulk_in - check if the endpoint is bulk IN + * @epd: endpoint to be checked + * + * Returns true if the endpoint has bulk transfer type and IN direction, + * otherwise it returns false. + */ +static inline int usb_endpoint_is_bulk_in( + const struct usb_endpoint_descriptor *epd) +{ + return usb_endpoint_xfer_bulk(epd) && usb_endpoint_dir_in(epd); +} + +/** + * usb_endpoint_is_bulk_out - check if the endpoint is bulk OUT + * @epd: endpoint to be checked + * + * Returns true if the endpoint has bulk transfer type and OUT direction, + * otherwise it returns false. + */ +static inline int usb_endpoint_is_bulk_out( + const struct usb_endpoint_descriptor *epd) +{ + return usb_endpoint_xfer_bulk(epd) && usb_endpoint_dir_out(epd); +} + +/** + * usb_endpoint_is_int_in - check if the endpoint is interrupt IN + * @epd: endpoint to be checked + * + * Returns true if the endpoint has interrupt transfer type and IN direction, + * otherwise it returns false. + */ +static inline int usb_endpoint_is_int_in( + const struct usb_endpoint_descriptor *epd) +{ + return usb_endpoint_xfer_int(epd) && usb_endpoint_dir_in(epd); +} + +/** + * usb_endpoint_is_int_out - check if the endpoint is interrupt OUT + * @epd: endpoint to be checked + * + * Returns true if the endpoint has interrupt transfer type and OUT direction, + * otherwise it returns false. + */ +static inline int usb_endpoint_is_int_out( + const struct usb_endpoint_descriptor *epd) +{ + return usb_endpoint_xfer_int(epd) && usb_endpoint_dir_out(epd); +} + +/** + * usb_endpoint_is_isoc_in - check if the endpoint is isochronous IN + * @epd: endpoint to be checked + * + * Returns true if the endpoint has isochronous transfer type and IN direction, + * otherwise it returns false. + */ +static inline int usb_endpoint_is_isoc_in( + const struct usb_endpoint_descriptor *epd) +{ + return usb_endpoint_xfer_isoc(epd) && usb_endpoint_dir_in(epd); +} + +/** + * usb_endpoint_is_isoc_out - check if the endpoint is isochronous OUT + * @epd: endpoint to be checked + * + * Returns true if the endpoint has isochronous transfer type and OUT direction, + * otherwise it returns false. + */ +static inline int usb_endpoint_is_isoc_out( + const struct usb_endpoint_descriptor *epd) +{ + return usb_endpoint_xfer_isoc(epd) && usb_endpoint_dir_out(epd); +} + +/** + * usb_endpoint_maxp - get endpoint's max packet size + * @epd: endpoint to be checked + * + * Returns @epd's max packet + */ +static inline int usb_endpoint_maxp(const struct usb_endpoint_descriptor *epd) +{ + return __le16_to_cpu(epd->wMaxPacketSize); +} + +static inline int usb_endpoint_interrupt_type( + const struct usb_endpoint_descriptor *epd) +{ + return epd->bmAttributes & USB_ENDPOINT_INTRTYPE; +} + +/*-------------------------------------------------------------------------*/ + +/* USB_DT_SS_ENDPOINT_COMP: SuperSpeed Endpoint Companion descriptor */ +struct usb_ss_ep_comp_descriptor { + __u8 bLength; + __u8 bDescriptorType; + + __u8 bMaxBurst; + __u8 bmAttributes; + __le16 wBytesPerInterval; +} __attribute__ ((packed)); + +#define USB_DT_SS_EP_COMP_SIZE 6 + +/* Bits 4:0 of bmAttributes if this is a bulk endpoint */ +static inline int +usb_ss_max_streams(const struct usb_ss_ep_comp_descriptor *comp) +{ + int max_streams; + + if (!comp) + return 0; + + max_streams = comp->bmAttributes & 0x1f; + + if (!max_streams) + return 0; + + max_streams = 1 << max_streams; + + return max_streams; +} + +/* Bits 1:0 of bmAttributes if this is an isoc endpoint */ +#define USB_SS_MULT(p) (1 + ((p) & 0x3)) + +/*-------------------------------------------------------------------------*/ + +/* USB_DT_DEVICE_QUALIFIER: Device Qualifier descriptor */ +struct usb_qualifier_descriptor { + __u8 bLength; + __u8 bDescriptorType; + + __le16 bcdUSB; + __u8 bDeviceClass; + __u8 bDeviceSubClass; + __u8 bDeviceProtocol; + __u8 bMaxPacketSize0; + __u8 bNumConfigurations; + __u8 bRESERVED; +} __attribute__ ((packed)); + + +/*-------------------------------------------------------------------------*/ + +/* USB_DT_OTG (from OTG 1.0a supplement) */ +struct usb_otg_descriptor { + __u8 bLength; + __u8 bDescriptorType; + + __u8 bmAttributes; /* support for HNP, SRP, etc */ +} __attribute__ ((packed)); + +/* from usb_otg_descriptor.bmAttributes */ +#define USB_OTG_SRP (1 << 0) +#define USB_OTG_HNP (1 << 1) /* swap host/device roles */ + +/*-------------------------------------------------------------------------*/ + +/* USB_DT_DEBUG: for special highspeed devices, replacing serial console */ +struct usb_debug_descriptor { + __u8 bLength; + __u8 bDescriptorType; + + /* bulk endpoints with 8 byte maxpacket */ + __u8 bDebugInEndpoint; + __u8 bDebugOutEndpoint; +} __attribute__((packed)); + +/*-------------------------------------------------------------------------*/ + +/* USB_DT_INTERFACE_ASSOCIATION: groups interfaces */ +struct usb_interface_assoc_descriptor { + __u8 bLength; + __u8 bDescriptorType; + + __u8 bFirstInterface; + __u8 bInterfaceCount; + __u8 bFunctionClass; + __u8 bFunctionSubClass; + __u8 bFunctionProtocol; + __u8 iFunction; +} __attribute__ ((packed)); + + +/*-------------------------------------------------------------------------*/ + +/* USB_DT_SECURITY: group of wireless security descriptors, including + * encryption types available for setting up a CC/association. + */ +struct usb_security_descriptor { + __u8 bLength; + __u8 bDescriptorType; + + __le16 wTotalLength; + __u8 bNumEncryptionTypes; +} __attribute__((packed)); + +/*-------------------------------------------------------------------------*/ + +/* USB_DT_KEY: used with {GET,SET}_SECURITY_DATA; only public keys + * may be retrieved. + */ +struct usb_key_descriptor { + __u8 bLength; + __u8 bDescriptorType; + + __u8 tTKID[3]; + __u8 bReserved; + __u8 bKeyData[0]; +} __attribute__((packed)); + +/*-------------------------------------------------------------------------*/ + +/* USB_DT_ENCRYPTION_TYPE: bundled in DT_SECURITY groups */ +struct usb_encryption_descriptor { + __u8 bLength; + __u8 bDescriptorType; + + __u8 bEncryptionType; +#define USB_ENC_TYPE_UNSECURE 0 +#define USB_ENC_TYPE_WIRED 1 /* non-wireless mode */ +#define USB_ENC_TYPE_CCM_1 2 /* aes128/cbc session */ +#define USB_ENC_TYPE_RSA_1 3 /* rsa3072/sha1 auth */ + __u8 bEncryptionValue; /* use in SET_ENCRYPTION */ + __u8 bAuthKeyIndex; +} __attribute__((packed)); + + +/*-------------------------------------------------------------------------*/ + +/* USB_DT_BOS: group of device-level capabilities */ +struct usb_bos_descriptor { + __u8 bLength; + __u8 bDescriptorType; + + __le16 wTotalLength; + __u8 bNumDeviceCaps; +} __attribute__((packed)); + +#define USB_DT_BOS_SIZE 5 +/*-------------------------------------------------------------------------*/ + +/* USB_DT_DEVICE_CAPABILITY: grouped with BOS */ +struct usb_dev_cap_header { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDevCapabilityType; +} __attribute__((packed)); + +#define USB_CAP_TYPE_WIRELESS_USB 1 + +struct usb_wireless_cap_descriptor { /* Ultra Wide Band */ + __u8 bLength; + __u8 bDescriptorType; + __u8 bDevCapabilityType; + + __u8 bmAttributes; +#define USB_WIRELESS_P2P_DRD (1 << 1) +#define USB_WIRELESS_BEACON_MASK (3 << 2) +#define USB_WIRELESS_BEACON_SELF (1 << 2) +#define USB_WIRELESS_BEACON_DIRECTED (2 << 2) +#define USB_WIRELESS_BEACON_NONE (3 << 2) + __le16 wPHYRates; /* bit rates, Mbps */ +#define USB_WIRELESS_PHY_53 (1 << 0) /* always set */ +#define USB_WIRELESS_PHY_80 (1 << 1) +#define USB_WIRELESS_PHY_107 (1 << 2) /* always set */ +#define USB_WIRELESS_PHY_160 (1 << 3) +#define USB_WIRELESS_PHY_200 (1 << 4) /* always set */ +#define USB_WIRELESS_PHY_320 (1 << 5) +#define USB_WIRELESS_PHY_400 (1 << 6) +#define USB_WIRELESS_PHY_480 (1 << 7) + __u8 bmTFITXPowerInfo; /* TFI power levels */ + __u8 bmFFITXPowerInfo; /* FFI power levels */ + __le16 bmBandGroup; + __u8 bReserved; +} __attribute__((packed)); + +/* USB 2.0 Extension descriptor */ +#define USB_CAP_TYPE_EXT 2 + +struct usb_ext_cap_descriptor { /* Link Power Management */ + __u8 bLength; + __u8 bDescriptorType; + __u8 bDevCapabilityType; + __le32 bmAttributes; +#define USB_LPM_SUPPORT (1 << 1) /* supports LPM */ +#define USB_BESL_SUPPORT (1 << 2) /* supports BESL */ +#define USB_BESL_BASELINE_VALID (1 << 3) /* Baseline BESL valid*/ +#define USB_BESL_DEEP_VALID (1 << 4) /* Deep BESL valid */ +#define USB_GET_BESL_BASELINE(p) (((p) & (0xf << 8)) >> 8) +#define USB_GET_BESL_DEEP(p) (((p) & (0xf << 12)) >> 12) +} __attribute__((packed)); + +#define USB_DT_USB_EXT_CAP_SIZE 7 + +/* + * SuperSpeed USB Capability descriptor: Defines the set of SuperSpeed USB + * specific device level capabilities + */ +#define USB_SS_CAP_TYPE 3 +struct usb_ss_cap_descriptor { /* Link Power Management */ + __u8 bLength; + __u8 bDescriptorType; + __u8 bDevCapabilityType; + __u8 bmAttributes; +#define USB_LTM_SUPPORT (1 << 1) /* supports LTM */ + __le16 wSpeedSupported; +#define USB_LOW_SPEED_OPERATION (1) /* Low speed operation */ +#define USB_FULL_SPEED_OPERATION (1 << 1) /* Full speed operation */ +#define USB_HIGH_SPEED_OPERATION (1 << 2) /* High speed operation */ +#define USB_5GBPS_OPERATION (1 << 3) /* Operation at 5Gbps */ + __u8 bFunctionalitySupport; + __u8 bU1devExitLat; + __le16 bU2DevExitLat; +} __attribute__((packed)); + +#define USB_DT_USB_SS_CAP_SIZE 10 + +/* + * Container ID Capability descriptor: Defines the instance unique ID used to + * identify the instance across all operating modes + */ +#define CONTAINER_ID_TYPE 4 +struct usb_ss_container_id_descriptor { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDevCapabilityType; + __u8 bReserved; + __u8 ContainerID[16]; /* 128-bit number */ +} __attribute__((packed)); + +#define USB_DT_USB_SS_CONTN_ID_SIZE 20 +/*-------------------------------------------------------------------------*/ + +/* USB_DT_WIRELESS_ENDPOINT_COMP: companion descriptor associated with + * each endpoint descriptor for a wireless device + */ +struct usb_wireless_ep_comp_descriptor { + __u8 bLength; + __u8 bDescriptorType; + + __u8 bMaxBurst; + __u8 bMaxSequence; + __le16 wMaxStreamDelay; + __le16 wOverTheAirPacketSize; + __u8 bOverTheAirInterval; + __u8 bmCompAttributes; +#define USB_ENDPOINT_SWITCH_MASK 0x03 /* in bmCompAttributes */ +#define USB_ENDPOINT_SWITCH_NO 0 +#define USB_ENDPOINT_SWITCH_SWITCH 1 +#define USB_ENDPOINT_SWITCH_SCALE 2 +} __attribute__((packed)); + +/*-------------------------------------------------------------------------*/ + +/* USB_REQ_SET_HANDSHAKE is a four-way handshake used between a wireless + * host and a device for connection set up, mutual authentication, and + * exchanging short lived session keys. The handshake depends on a CC. + */ +struct usb_handshake { + __u8 bMessageNumber; + __u8 bStatus; + __u8 tTKID[3]; + __u8 bReserved; + __u8 CDID[16]; + __u8 nonce[16]; + __u8 MIC[8]; +} __attribute__((packed)); + +/*-------------------------------------------------------------------------*/ + +/* USB_REQ_SET_CONNECTION modifies or revokes a connection context (CC). + * A CC may also be set up using non-wireless secure channels (including + * wired USB!), and some devices may support CCs with multiple hosts. + */ +struct usb_connection_context { + __u8 CHID[16]; /* persistent host id */ + __u8 CDID[16]; /* device id (unique w/in host context) */ + __u8 CK[16]; /* connection key */ +} __attribute__((packed)); + +/*-------------------------------------------------------------------------*/ + +/* USB 2.0 defines three speeds, here's how Linux identifies them */ + +enum usb_device_speed { + USB_SPEED_UNKNOWN = 0, /* enumerating */ + USB_SPEED_LOW, USB_SPEED_FULL, /* usb 1.1 */ + USB_SPEED_HIGH, /* usb 2.0 */ + USB_SPEED_WIRELESS, /* wireless (usb 2.5) */ + USB_SPEED_SUPER, /* usb 3.0 */ +}; + + +enum usb_device_state { + /* NOTATTACHED isn't in the USB spec, and this state acts + * the same as ATTACHED ... but it's clearer this way. + */ + USB_STATE_NOTATTACHED = 0, + + /* chapter 9 and authentication (wireless) device states */ + USB_STATE_ATTACHED, + USB_STATE_POWERED, /* wired */ + USB_STATE_RECONNECTING, /* auth */ + USB_STATE_UNAUTHENTICATED, /* auth */ + USB_STATE_DEFAULT, /* limited function */ + USB_STATE_ADDRESS, + USB_STATE_CONFIGURED, /* most functions */ + + USB_STATE_SUSPENDED + + /* NOTE: there are actually four different SUSPENDED + * states, returning to POWERED, DEFAULT, ADDRESS, or + * CONFIGURED respectively when SOF tokens flow again. + * At this level there's no difference between L1 and L2 + * suspend states. (L2 being original USB 1.1 suspend.) + */ +}; + +enum usb3_link_state { + USB3_LPM_U0 = 0, + USB3_LPM_U1, + USB3_LPM_U2, + USB3_LPM_U3 +}; + +/* + * A U1 timeout of 0x0 means the parent hub will reject any transitions to U1. + * 0xff means the parent hub will accept transitions to U1, but will not + * initiate a transition. + * + * A U1 timeout of 0x1 to 0x7F also causes the hub to initiate a transition to + * U1 after that many microseconds. Timeouts of 0x80 to 0xFE are reserved + * values. + * + * A U2 timeout of 0x0 means the parent hub will reject any transitions to U2. + * 0xff means the parent hub will accept transitions to U2, but will not + * initiate a transition. + * + * A U2 timeout of 0x1 to 0xFE also causes the hub to initiate a transition to + * U2 after N*256 microseconds. Therefore a U2 timeout value of 0x1 means a U2 + * idle timer of 256 microseconds, 0x2 means 512 microseconds, 0xFE means + * 65.024ms. + */ +#define USB3_LPM_DISABLED 0x0 +#define USB3_LPM_U1_MAX_TIMEOUT 0x7F +#define USB3_LPM_U2_MAX_TIMEOUT 0xFE +#define USB3_LPM_DEVICE_INITIATED 0xFF + +struct usb_set_sel_req { + __u8 u1_sel; + __u8 u1_pel; + __le16 u2_sel; + __le16 u2_pel; +} __attribute__ ((packed)); + +/* + * The Set System Exit Latency control transfer provides one byte each for + * U1 SEL and U1 PEL, so the max exit latency is 0xFF. U2 SEL and U2 PEL each + * are two bytes long. + */ +#define USB3_LPM_MAX_U1_SEL_PEL 0xFF +#define USB3_LPM_MAX_U2_SEL_PEL 0xFFFF + +/*-------------------------------------------------------------------------*/ + +/* + * As per USB compliance update, a device that is actively drawing + * more than 100mA from USB must report itself as bus-powered in + * the GetStatus(DEVICE) call. + * http://compliance.usb.org/index.asp?UpdateFile=Electrical&Format=Standard#34 + */ +#define USB_SELF_POWER_VBUS_MAX_DRAW 100 + +#endif /* _UAPI__LINUX_USB_CH9_H */ diff --git a/include/uapi/linux/usb/functionfs.h b/include/uapi/linux/usb/functionfs.h new file mode 100644 index 000000000000..d6b01283f85c --- /dev/null +++ b/include/uapi/linux/usb/functionfs.h @@ -0,0 +1,169 @@ +#ifndef _UAPI__LINUX_FUNCTIONFS_H__ +#define _UAPI__LINUX_FUNCTIONFS_H__ + + +#include +#include + +#include + + +enum { + FUNCTIONFS_DESCRIPTORS_MAGIC = 1, + FUNCTIONFS_STRINGS_MAGIC = 2 +}; + + +#ifndef __KERNEL__ + +/* Descriptor of an non-audio endpoint */ +struct usb_endpoint_descriptor_no_audio { + __u8 bLength; + __u8 bDescriptorType; + + __u8 bEndpointAddress; + __u8 bmAttributes; + __le16 wMaxPacketSize; + __u8 bInterval; +} __attribute__((packed)); + + +/* + * All numbers must be in little endian order. + */ + +struct usb_functionfs_descs_head { + __le32 magic; + __le32 length; + __le32 fs_count; + __le32 hs_count; +} __attribute__((packed)); + +/* + * Descriptors format: + * + * | off | name | type | description | + * |-----+-----------+--------------+--------------------------------------| + * | 0 | magic | LE32 | FUNCTIONFS_{FS,HS}_DESCRIPTORS_MAGIC | + * | 4 | length | LE32 | length of the whole data chunk | + * | 8 | fs_count | LE32 | number of full-speed descriptors | + * | 12 | hs_count | LE32 | number of high-speed descriptors | + * | 16 | fs_descrs | Descriptor[] | list of full-speed descriptors | + * | | hs_descrs | Descriptor[] | list of high-speed descriptors | + * + * descs are just valid USB descriptors and have the following format: + * + * | off | name | type | description | + * |-----+-----------------+------+--------------------------| + * | 0 | bLength | U8 | length of the descriptor | + * | 1 | bDescriptorType | U8 | descriptor type | + * | 2 | payload | | descriptor's payload | + */ + +struct usb_functionfs_strings_head { + __le32 magic; + __le32 length; + __le32 str_count; + __le32 lang_count; +} __attribute__((packed)); + +/* + * Strings format: + * + * | off | name | type | description | + * |-----+------------+-----------------------+----------------------------| + * | 0 | magic | LE32 | FUNCTIONFS_STRINGS_MAGIC | + * | 4 | length | LE32 | length of the data chunk | + * | 8 | str_count | LE32 | number of strings | + * | 12 | lang_count | LE32 | number of languages | + * | 16 | stringtab | StringTab[lang_count] | table of strings per lang | + * + * For each language there is one stringtab entry (ie. there are lang_count + * stringtab entires). Each StringTab has following format: + * + * | off | name | type | description | + * |-----+---------+-------------------+------------------------------------| + * | 0 | lang | LE16 | language code | + * | 2 | strings | String[str_count] | array of strings in given language | + * + * For each string there is one strings entry (ie. there are str_count + * string entries). Each String is a NUL terminated string encoded in + * UTF-8. + */ + +#endif + + +/* + * Events are delivered on the ep0 file descriptor, when the user mode driver + * reads from this file descriptor after writing the descriptors. Don't + * stop polling this descriptor. + */ + +enum usb_functionfs_event_type { + FUNCTIONFS_BIND, + FUNCTIONFS_UNBIND, + + FUNCTIONFS_ENABLE, + FUNCTIONFS_DISABLE, + + FUNCTIONFS_SETUP, + + FUNCTIONFS_SUSPEND, + FUNCTIONFS_RESUME +}; + +/* NOTE: this structure must stay the same size and layout on + * both 32-bit and 64-bit kernels. + */ +struct usb_functionfs_event { + union { + /* SETUP: packet; DATA phase i/o precedes next event + *(setup.bmRequestType & USB_DIR_IN) flags direction */ + struct usb_ctrlrequest setup; + } __attribute__((packed)) u; + + /* enum usb_functionfs_event_type */ + __u8 type; + __u8 _pad[3]; +} __attribute__((packed)); + + +/* Endpoint ioctls */ +/* The same as in gadgetfs */ + +/* IN transfers may be reported to the gadget driver as complete + * when the fifo is loaded, before the host reads the data; + * OUT transfers may be reported to the host's "client" driver as + * complete when they're sitting in the FIFO unread. + * THIS returns how many bytes are "unclaimed" in the endpoint fifo + * (needed for precise fault handling, when the hardware allows it) + */ +#define FUNCTIONFS_FIFO_STATUS _IO('g', 1) + +/* discards any unclaimed data in the fifo. */ +#define FUNCTIONFS_FIFO_FLUSH _IO('g', 2) + +/* resets endpoint halt+toggle; used to implement set_interface. + * some hardware (like pxa2xx) can't support this. + */ +#define FUNCTIONFS_CLEAR_HALT _IO('g', 3) + +/* Specific for functionfs */ + +/* + * Returns reverse mapping of an interface. Called on EP0. If there + * is no such interface returns -EDOM. If function is not active + * returns -ENODEV. + */ +#define FUNCTIONFS_INTERFACE_REVMAP _IO('g', 128) + +/* + * Returns real bEndpointAddress of an endpoint. If function is not + * active returns -ENODEV. + */ +#define FUNCTIONFS_ENDPOINT_REVMAP _IO('g', 129) + + + +#endif /* _UAPI__LINUX_FUNCTIONFS_H__ */ diff --git a/include/uapi/linux/usb/g_printer.h b/include/uapi/linux/usb/g_printer.h new file mode 100644 index 000000000000..6178fde50f74 --- /dev/null +++ b/include/uapi/linux/usb/g_printer.h @@ -0,0 +1,35 @@ +/* + * g_printer.h -- Header file for USB Printer gadget driver + * + * Copyright (C) 2007 Craig W. Nadler + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef __LINUX_USB_G_PRINTER_H +#define __LINUX_USB_G_PRINTER_H + +#define PRINTER_NOT_ERROR 0x08 +#define PRINTER_SELECTED 0x10 +#define PRINTER_PAPER_EMPTY 0x20 + +/* The 'g' code is also used by gadgetfs ioctl requests. + * Don't add any colliding codes to either driver, and keep + * them in unique ranges (size 0x20 for now). + */ +#define GADGET_GET_PRINTER_STATUS _IOR('g', 0x21, unsigned char) +#define GADGET_SET_PRINTER_STATUS _IOWR('g', 0x22, unsigned char) + +#endif /* __LINUX_USB_G_PRINTER_H */ diff --git a/include/uapi/linux/usb/gadgetfs.h b/include/uapi/linux/usb/gadgetfs.h new file mode 100644 index 000000000000..0bb12e0d4f8f --- /dev/null +++ b/include/uapi/linux/usb/gadgetfs.h @@ -0,0 +1,88 @@ +/* + * Filesystem based user-mode API to USB Gadget controller hardware + * + * Other than ep0 operations, most things are done by read() and write() + * on endpoint files found in one directory. They are configured by + * writing descriptors, and then may be used for normal stream style + * i/o requests. When ep0 is configured, the device can enumerate; + * when it's closed, the device disconnects from usb. Operations on + * ep0 require ioctl() operations. + * + * Configuration and device descriptors get written to /dev/gadget/$CHIP, + * which may then be used to read usb_gadgetfs_event structs. The driver + * may activate endpoints as it handles SET_CONFIGURATION setup events, + * or earlier; writing endpoint descriptors to /dev/gadget/$ENDPOINT + * then performing data transfers by reading or writing. + */ + +#ifndef __LINUX_USB_GADGETFS_H +#define __LINUX_USB_GADGETFS_H + +#include +#include + +#include + +/* + * Events are delivered on the ep0 file descriptor, when the user mode driver + * reads from this file descriptor after writing the descriptors. Don't + * stop polling this descriptor. + */ + +enum usb_gadgetfs_event_type { + GADGETFS_NOP = 0, + + GADGETFS_CONNECT, + GADGETFS_DISCONNECT, + GADGETFS_SETUP, + GADGETFS_SUSPEND, + /* and likely more ! */ +}; + +/* NOTE: this structure must stay the same size and layout on + * both 32-bit and 64-bit kernels. + */ +struct usb_gadgetfs_event { + union { + /* NOP, DISCONNECT, SUSPEND: nothing + * ... some hardware can't report disconnection + */ + + /* CONNECT: just the speed */ + enum usb_device_speed speed; + + /* SETUP: packet; DATA phase i/o precedes next event + *(setup.bmRequestType & USB_DIR_IN) flags direction + * ... includes SET_CONFIGURATION, SET_INTERFACE + */ + struct usb_ctrlrequest setup; + } u; + enum usb_gadgetfs_event_type type; +}; + + +/* The 'g' code is also used by printer gadget ioctl requests. + * Don't add any colliding codes to either driver, and keep + * them in unique ranges (size 0x20 for now). + */ + +/* endpoint ioctls */ + +/* IN transfers may be reported to the gadget driver as complete + * when the fifo is loaded, before the host reads the data; + * OUT transfers may be reported to the host's "client" driver as + * complete when they're sitting in the FIFO unread. + * THIS returns how many bytes are "unclaimed" in the endpoint fifo + * (needed for precise fault handling, when the hardware allows it) + */ +#define GADGETFS_FIFO_STATUS _IO('g', 1) + +/* discards any unclaimed data in the fifo. */ +#define GADGETFS_FIFO_FLUSH _IO('g', 2) + +/* resets endpoint halt+toggle; used to implement set_interface. + * some hardware (like pxa2xx) can't support this. + */ +#define GADGETFS_CLEAR_HALT _IO('g', 3) + +#endif /* __LINUX_USB_GADGETFS_H */ diff --git a/include/uapi/linux/usb/midi.h b/include/uapi/linux/usb/midi.h new file mode 100644 index 000000000000..c8c52e3c91de --- /dev/null +++ b/include/uapi/linux/usb/midi.h @@ -0,0 +1,112 @@ +/* + * -- USB MIDI definitions. + * + * Copyright (C) 2006 Thumtronics Pty Ltd. + * Developed for Thumtronics by Grey Innovation + * Ben Williamson + * + * This software is distributed under the terms of the GNU General Public + * License ("GPL") version 2, as published by the Free Software Foundation. + * + * This file holds USB constants and structures defined + * by the USB Device Class Definition for MIDI Devices. + * Comments below reference relevant sections of that document: + * + * http://www.usb.org/developers/devclass_docs/midi10.pdf + */ + +#ifndef __LINUX_USB_MIDI_H +#define __LINUX_USB_MIDI_H + +#include + +/* A.1 MS Class-Specific Interface Descriptor Subtypes */ +#define USB_MS_HEADER 0x01 +#define USB_MS_MIDI_IN_JACK 0x02 +#define USB_MS_MIDI_OUT_JACK 0x03 +#define USB_MS_ELEMENT 0x04 + +/* A.2 MS Class-Specific Endpoint Descriptor Subtypes */ +#define USB_MS_GENERAL 0x01 + +/* A.3 MS MIDI IN and OUT Jack Types */ +#define USB_MS_EMBEDDED 0x01 +#define USB_MS_EXTERNAL 0x02 + +/* 6.1.2.1 Class-Specific MS Interface Header Descriptor */ +struct usb_ms_header_descriptor { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDescriptorSubtype; + __le16 bcdMSC; + __le16 wTotalLength; +} __attribute__ ((packed)); + +#define USB_DT_MS_HEADER_SIZE 7 + +/* 6.1.2.2 MIDI IN Jack Descriptor */ +struct usb_midi_in_jack_descriptor { + __u8 bLength; + __u8 bDescriptorType; /* USB_DT_CS_INTERFACE */ + __u8 bDescriptorSubtype; /* USB_MS_MIDI_IN_JACK */ + __u8 bJackType; /* USB_MS_EMBEDDED/EXTERNAL */ + __u8 bJackID; + __u8 iJack; +} __attribute__ ((packed)); + +#define USB_DT_MIDI_IN_SIZE 6 + +struct usb_midi_source_pin { + __u8 baSourceID; + __u8 baSourcePin; +} __attribute__ ((packed)); + +/* 6.1.2.3 MIDI OUT Jack Descriptor */ +struct usb_midi_out_jack_descriptor { + __u8 bLength; + __u8 bDescriptorType; /* USB_DT_CS_INTERFACE */ + __u8 bDescriptorSubtype; /* USB_MS_MIDI_OUT_JACK */ + __u8 bJackType; /* USB_MS_EMBEDDED/EXTERNAL */ + __u8 bJackID; + __u8 bNrInputPins; /* p */ + struct usb_midi_source_pin pins[]; /* [p] */ + /*__u8 iJack; -- omitted due to variable-sized pins[] */ +} __attribute__ ((packed)); + +#define USB_DT_MIDI_OUT_SIZE(p) (7 + 2 * (p)) + +/* As above, but more useful for defining your own descriptors: */ +#define DECLARE_USB_MIDI_OUT_JACK_DESCRIPTOR(p) \ +struct usb_midi_out_jack_descriptor_##p { \ + __u8 bLength; \ + __u8 bDescriptorType; \ + __u8 bDescriptorSubtype; \ + __u8 bJackType; \ + __u8 bJackID; \ + __u8 bNrInputPins; \ + struct usb_midi_source_pin pins[p]; \ + __u8 iJack; \ +} __attribute__ ((packed)) + +/* 6.2.2 Class-Specific MS Bulk Data Endpoint Descriptor */ +struct usb_ms_endpoint_descriptor { + __u8 bLength; /* 4+n */ + __u8 bDescriptorType; /* USB_DT_CS_ENDPOINT */ + __u8 bDescriptorSubtype; /* USB_MS_GENERAL */ + __u8 bNumEmbMIDIJack; /* n */ + __u8 baAssocJackID[]; /* [n] */ +} __attribute__ ((packed)); + +#define USB_DT_MS_ENDPOINT_SIZE(n) (4 + (n)) + +/* As above, but more useful for defining your own descriptors: */ +#define DECLARE_USB_MS_ENDPOINT_DESCRIPTOR(n) \ +struct usb_ms_endpoint_descriptor_##n { \ + __u8 bLength; \ + __u8 bDescriptorType; \ + __u8 bDescriptorSubtype; \ + __u8 bNumEmbMIDIJack; \ + __u8 baAssocJackID[n]; \ +} __attribute__ ((packed)) + +#endif /* __LINUX_USB_MIDI_H */ diff --git a/include/uapi/linux/usb/tmc.h b/include/uapi/linux/usb/tmc.h new file mode 100644 index 000000000000..c045ae12556c --- /dev/null +++ b/include/uapi/linux/usb/tmc.h @@ -0,0 +1,43 @@ +/* + * Copyright (C) 2007 Stefan Kopp, Gechingen, Germany + * Copyright (C) 2008 Novell, Inc. + * Copyright (C) 2008 Greg Kroah-Hartman + * + * This file holds USB constants defined by the USB Device Class + * Definition for Test and Measurement devices published by the USB-IF. + * + * It also has the ioctl definitions for the usbtmc kernel driver that + * userspace needs to know about. + */ + +#ifndef __LINUX_USB_TMC_H +#define __LINUX_USB_TMC_H + +/* USB TMC status values */ +#define USBTMC_STATUS_SUCCESS 0x01 +#define USBTMC_STATUS_PENDING 0x02 +#define USBTMC_STATUS_FAILED 0x80 +#define USBTMC_STATUS_TRANSFER_NOT_IN_PROGRESS 0x81 +#define USBTMC_STATUS_SPLIT_NOT_IN_PROGRESS 0x82 +#define USBTMC_STATUS_SPLIT_IN_PROGRESS 0x83 + +/* USB TMC requests values */ +#define USBTMC_REQUEST_INITIATE_ABORT_BULK_OUT 1 +#define USBTMC_REQUEST_CHECK_ABORT_BULK_OUT_STATUS 2 +#define USBTMC_REQUEST_INITIATE_ABORT_BULK_IN 3 +#define USBTMC_REQUEST_CHECK_ABORT_BULK_IN_STATUS 4 +#define USBTMC_REQUEST_INITIATE_CLEAR 5 +#define USBTMC_REQUEST_CHECK_CLEAR_STATUS 6 +#define USBTMC_REQUEST_GET_CAPABILITIES 7 +#define USBTMC_REQUEST_INDICATOR_PULSE 64 + +/* Request values for USBTMC driver's ioctl entry point */ +#define USBTMC_IOC_NR 91 +#define USBTMC_IOCTL_INDICATOR_PULSE _IO(USBTMC_IOC_NR, 1) +#define USBTMC_IOCTL_CLEAR _IO(USBTMC_IOC_NR, 2) +#define USBTMC_IOCTL_ABORT_BULK_OUT _IO(USBTMC_IOC_NR, 3) +#define USBTMC_IOCTL_ABORT_BULK_IN _IO(USBTMC_IOC_NR, 4) +#define USBTMC_IOCTL_CLEAR_OUT_HALT _IO(USBTMC_IOC_NR, 6) +#define USBTMC_IOCTL_CLEAR_IN_HALT _IO(USBTMC_IOC_NR, 7) + +#endif diff --git a/include/uapi/linux/usb/video.h b/include/uapi/linux/usb/video.h new file mode 100644 index 000000000000..3b3b95e01f71 --- /dev/null +++ b/include/uapi/linux/usb/video.h @@ -0,0 +1,568 @@ +/* + * USB Video Class definitions. + * + * Copyright (C) 2009 Laurent Pinchart + * + * This file holds USB constants and structures defined by the USB Device + * Class Definition for Video Devices. Unless otherwise stated, comments + * below reference relevant sections of the USB Video Class 1.1 specification + * available at + * + * http://www.usb.org/developers/devclass_docs/USB_Video_Class_1_1.zip + */ + +#ifndef __LINUX_USB_VIDEO_H +#define __LINUX_USB_VIDEO_H + +#include + +/* -------------------------------------------------------------------------- + * UVC constants + */ + +/* A.2. Video Interface Subclass Codes */ +#define UVC_SC_UNDEFINED 0x00 +#define UVC_SC_VIDEOCONTROL 0x01 +#define UVC_SC_VIDEOSTREAMING 0x02 +#define UVC_SC_VIDEO_INTERFACE_COLLECTION 0x03 + +/* A.3. Video Interface Protocol Codes */ +#define UVC_PC_PROTOCOL_UNDEFINED 0x00 + +/* A.5. Video Class-Specific VC Interface Descriptor Subtypes */ +#define UVC_VC_DESCRIPTOR_UNDEFINED 0x00 +#define UVC_VC_HEADER 0x01 +#define UVC_VC_INPUT_TERMINAL 0x02 +#define UVC_VC_OUTPUT_TERMINAL 0x03 +#define UVC_VC_SELECTOR_UNIT 0x04 +#define UVC_VC_PROCESSING_UNIT 0x05 +#define UVC_VC_EXTENSION_UNIT 0x06 + +/* A.6. Video Class-Specific VS Interface Descriptor Subtypes */ +#define UVC_VS_UNDEFINED 0x00 +#define UVC_VS_INPUT_HEADER 0x01 +#define UVC_VS_OUTPUT_HEADER 0x02 +#define UVC_VS_STILL_IMAGE_FRAME 0x03 +#define UVC_VS_FORMAT_UNCOMPRESSED 0x04 +#define UVC_VS_FRAME_UNCOMPRESSED 0x05 +#define UVC_VS_FORMAT_MJPEG 0x06 +#define UVC_VS_FRAME_MJPEG 0x07 +#define UVC_VS_FORMAT_MPEG2TS 0x0a +#define UVC_VS_FORMAT_DV 0x0c +#define UVC_VS_COLORFORMAT 0x0d +#define UVC_VS_FORMAT_FRAME_BASED 0x10 +#define UVC_VS_FRAME_FRAME_BASED 0x11 +#define UVC_VS_FORMAT_STREAM_BASED 0x12 + +/* A.7. Video Class-Specific Endpoint Descriptor Subtypes */ +#define UVC_EP_UNDEFINED 0x00 +#define UVC_EP_GENERAL 0x01 +#define UVC_EP_ENDPOINT 0x02 +#define UVC_EP_INTERRUPT 0x03 + +/* A.8. Video Class-Specific Request Codes */ +#define UVC_RC_UNDEFINED 0x00 +#define UVC_SET_CUR 0x01 +#define UVC_GET_CUR 0x81 +#define UVC_GET_MIN 0x82 +#define UVC_GET_MAX 0x83 +#define UVC_GET_RES 0x84 +#define UVC_GET_LEN 0x85 +#define UVC_GET_INFO 0x86 +#define UVC_GET_DEF 0x87 + +/* A.9.1. VideoControl Interface Control Selectors */ +#define UVC_VC_CONTROL_UNDEFINED 0x00 +#define UVC_VC_VIDEO_POWER_MODE_CONTROL 0x01 +#define UVC_VC_REQUEST_ERROR_CODE_CONTROL 0x02 + +/* A.9.2. Terminal Control Selectors */ +#define UVC_TE_CONTROL_UNDEFINED 0x00 + +/* A.9.3. Selector Unit Control Selectors */ +#define UVC_SU_CONTROL_UNDEFINED 0x00 +#define UVC_SU_INPUT_SELECT_CONTROL 0x01 + +/* A.9.4. Camera Terminal Control Selectors */ +#define UVC_CT_CONTROL_UNDEFINED 0x00 +#define UVC_CT_SCANNING_MODE_CONTROL 0x01 +#define UVC_CT_AE_MODE_CONTROL 0x02 +#define UVC_CT_AE_PRIORITY_CONTROL 0x03 +#define UVC_CT_EXPOSURE_TIME_ABSOLUTE_CONTROL 0x04 +#define UVC_CT_EXPOSURE_TIME_RELATIVE_CONTROL 0x05 +#define UVC_CT_FOCUS_ABSOLUTE_CONTROL 0x06 +#define UVC_CT_FOCUS_RELATIVE_CONTROL 0x07 +#define UVC_CT_FOCUS_AUTO_CONTROL 0x08 +#define UVC_CT_IRIS_ABSOLUTE_CONTROL 0x09 +#define UVC_CT_IRIS_RELATIVE_CONTROL 0x0a +#define UVC_CT_ZOOM_ABSOLUTE_CONTROL 0x0b +#define UVC_CT_ZOOM_RELATIVE_CONTROL 0x0c +#define UVC_CT_PANTILT_ABSOLUTE_CONTROL 0x0d +#define UVC_CT_PANTILT_RELATIVE_CONTROL 0x0e +#define UVC_CT_ROLL_ABSOLUTE_CONTROL 0x0f +#define UVC_CT_ROLL_RELATIVE_CONTROL 0x10 +#define UVC_CT_PRIVACY_CONTROL 0x11 + +/* A.9.5. Processing Unit Control Selectors */ +#define UVC_PU_CONTROL_UNDEFINED 0x00 +#define UVC_PU_BACKLIGHT_COMPENSATION_CONTROL 0x01 +#define UVC_PU_BRIGHTNESS_CONTROL 0x02 +#define UVC_PU_CONTRAST_CONTROL 0x03 +#define UVC_PU_GAIN_CONTROL 0x04 +#define UVC_PU_POWER_LINE_FREQUENCY_CONTROL 0x05 +#define UVC_PU_HUE_CONTROL 0x06 +#define UVC_PU_SATURATION_CONTROL 0x07 +#define UVC_PU_SHARPNESS_CONTROL 0x08 +#define UVC_PU_GAMMA_CONTROL 0x09 +#define UVC_PU_WHITE_BALANCE_TEMPERATURE_CONTROL 0x0a +#define UVC_PU_WHITE_BALANCE_TEMPERATURE_AUTO_CONTROL 0x0b +#define UVC_PU_WHITE_BALANCE_COMPONENT_CONTROL 0x0c +#define UVC_PU_WHITE_BALANCE_COMPONENT_AUTO_CONTROL 0x0d +#define UVC_PU_DIGITAL_MULTIPLIER_CONTROL 0x0e +#define UVC_PU_DIGITAL_MULTIPLIER_LIMIT_CONTROL 0x0f +#define UVC_PU_HUE_AUTO_CONTROL 0x10 +#define UVC_PU_ANALOG_VIDEO_STANDARD_CONTROL 0x11 +#define UVC_PU_ANALOG_LOCK_STATUS_CONTROL 0x12 + +/* A.9.7. VideoStreaming Interface Control Selectors */ +#define UVC_VS_CONTROL_UNDEFINED 0x00 +#define UVC_VS_PROBE_CONTROL 0x01 +#define UVC_VS_COMMIT_CONTROL 0x02 +#define UVC_VS_STILL_PROBE_CONTROL 0x03 +#define UVC_VS_STILL_COMMIT_CONTROL 0x04 +#define UVC_VS_STILL_IMAGE_TRIGGER_CONTROL 0x05 +#define UVC_VS_STREAM_ERROR_CODE_CONTROL 0x06 +#define UVC_VS_GENERATE_KEY_FRAME_CONTROL 0x07 +#define UVC_VS_UPDATE_FRAME_SEGMENT_CONTROL 0x08 +#define UVC_VS_SYNC_DELAY_CONTROL 0x09 + +/* B.1. USB Terminal Types */ +#define UVC_TT_VENDOR_SPECIFIC 0x0100 +#define UVC_TT_STREAMING 0x0101 + +/* B.2. Input Terminal Types */ +#define UVC_ITT_VENDOR_SPECIFIC 0x0200 +#define UVC_ITT_CAMERA 0x0201 +#define UVC_ITT_MEDIA_TRANSPORT_INPUT 0x0202 + +/* B.3. Output Terminal Types */ +#define UVC_OTT_VENDOR_SPECIFIC 0x0300 +#define UVC_OTT_DISPLAY 0x0301 +#define UVC_OTT_MEDIA_TRANSPORT_OUTPUT 0x0302 + +/* B.4. External Terminal Types */ +#define UVC_EXTERNAL_VENDOR_SPECIFIC 0x0400 +#define UVC_COMPOSITE_CONNECTOR 0x0401 +#define UVC_SVIDEO_CONNECTOR 0x0402 +#define UVC_COMPONENT_CONNECTOR 0x0403 + +/* 2.4.2.2. Status Packet Type */ +#define UVC_STATUS_TYPE_CONTROL 1 +#define UVC_STATUS_TYPE_STREAMING 2 + +/* 2.4.3.3. Payload Header Information */ +#define UVC_STREAM_EOH (1 << 7) +#define UVC_STREAM_ERR (1 << 6) +#define UVC_STREAM_STI (1 << 5) +#define UVC_STREAM_RES (1 << 4) +#define UVC_STREAM_SCR (1 << 3) +#define UVC_STREAM_PTS (1 << 2) +#define UVC_STREAM_EOF (1 << 1) +#define UVC_STREAM_FID (1 << 0) + +/* 4.1.2. Control Capabilities */ +#define UVC_CONTROL_CAP_GET (1 << 0) +#define UVC_CONTROL_CAP_SET (1 << 1) +#define UVC_CONTROL_CAP_DISABLED (1 << 2) +#define UVC_CONTROL_CAP_AUTOUPDATE (1 << 3) +#define UVC_CONTROL_CAP_ASYNCHRONOUS (1 << 4) + +/* ------------------------------------------------------------------------ + * UVC structures + */ + +/* All UVC descriptors have these 3 fields at the beginning */ +struct uvc_descriptor_header { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDescriptorSubType; +} __attribute__((packed)); + +/* 3.7.2. Video Control Interface Header Descriptor */ +struct uvc_header_descriptor { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDescriptorSubType; + __u16 bcdUVC; + __u16 wTotalLength; + __u32 dwClockFrequency; + __u8 bInCollection; + __u8 baInterfaceNr[]; +} __attribute__((__packed__)); + +#define UVC_DT_HEADER_SIZE(n) (12+(n)) + +#define UVC_HEADER_DESCRIPTOR(n) \ + uvc_header_descriptor_##n + +#define DECLARE_UVC_HEADER_DESCRIPTOR(n) \ +struct UVC_HEADER_DESCRIPTOR(n) { \ + __u8 bLength; \ + __u8 bDescriptorType; \ + __u8 bDescriptorSubType; \ + __u16 bcdUVC; \ + __u16 wTotalLength; \ + __u32 dwClockFrequency; \ + __u8 bInCollection; \ + __u8 baInterfaceNr[n]; \ +} __attribute__ ((packed)) + +/* 3.7.2.1. Input Terminal Descriptor */ +struct uvc_input_terminal_descriptor { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDescriptorSubType; + __u8 bTerminalID; + __u16 wTerminalType; + __u8 bAssocTerminal; + __u8 iTerminal; +} __attribute__((__packed__)); + +#define UVC_DT_INPUT_TERMINAL_SIZE 8 + +/* 3.7.2.2. Output Terminal Descriptor */ +struct uvc_output_terminal_descriptor { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDescriptorSubType; + __u8 bTerminalID; + __u16 wTerminalType; + __u8 bAssocTerminal; + __u8 bSourceID; + __u8 iTerminal; +} __attribute__((__packed__)); + +#define UVC_DT_OUTPUT_TERMINAL_SIZE 9 + +/* 3.7.2.3. Camera Terminal Descriptor */ +struct uvc_camera_terminal_descriptor { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDescriptorSubType; + __u8 bTerminalID; + __u16 wTerminalType; + __u8 bAssocTerminal; + __u8 iTerminal; + __u16 wObjectiveFocalLengthMin; + __u16 wObjectiveFocalLengthMax; + __u16 wOcularFocalLength; + __u8 bControlSize; + __u8 bmControls[3]; +} __attribute__((__packed__)); + +#define UVC_DT_CAMERA_TERMINAL_SIZE(n) (15+(n)) + +/* 3.7.2.4. Selector Unit Descriptor */ +struct uvc_selector_unit_descriptor { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDescriptorSubType; + __u8 bUnitID; + __u8 bNrInPins; + __u8 baSourceID[0]; + __u8 iSelector; +} __attribute__((__packed__)); + +#define UVC_DT_SELECTOR_UNIT_SIZE(n) (6+(n)) + +#define UVC_SELECTOR_UNIT_DESCRIPTOR(n) \ + uvc_selector_unit_descriptor_##n + +#define DECLARE_UVC_SELECTOR_UNIT_DESCRIPTOR(n) \ +struct UVC_SELECTOR_UNIT_DESCRIPTOR(n) { \ + __u8 bLength; \ + __u8 bDescriptorType; \ + __u8 bDescriptorSubType; \ + __u8 bUnitID; \ + __u8 bNrInPins; \ + __u8 baSourceID[n]; \ + __u8 iSelector; \ +} __attribute__ ((packed)) + +/* 3.7.2.5. Processing Unit Descriptor */ +struct uvc_processing_unit_descriptor { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDescriptorSubType; + __u8 bUnitID; + __u8 bSourceID; + __u16 wMaxMultiplier; + __u8 bControlSize; + __u8 bmControls[2]; + __u8 iProcessing; +} __attribute__((__packed__)); + +#define UVC_DT_PROCESSING_UNIT_SIZE(n) (9+(n)) + +/* 3.7.2.6. Extension Unit Descriptor */ +struct uvc_extension_unit_descriptor { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDescriptorSubType; + __u8 bUnitID; + __u8 guidExtensionCode[16]; + __u8 bNumControls; + __u8 bNrInPins; + __u8 baSourceID[0]; + __u8 bControlSize; + __u8 bmControls[0]; + __u8 iExtension; +} __attribute__((__packed__)); + +#define UVC_DT_EXTENSION_UNIT_SIZE(p, n) (24+(p)+(n)) + +#define UVC_EXTENSION_UNIT_DESCRIPTOR(p, n) \ + uvc_extension_unit_descriptor_##p_##n + +#define DECLARE_UVC_EXTENSION_UNIT_DESCRIPTOR(p, n) \ +struct UVC_EXTENSION_UNIT_DESCRIPTOR(p, n) { \ + __u8 bLength; \ + __u8 bDescriptorType; \ + __u8 bDescriptorSubType; \ + __u8 bUnitID; \ + __u8 guidExtensionCode[16]; \ + __u8 bNumControls; \ + __u8 bNrInPins; \ + __u8 baSourceID[p]; \ + __u8 bControlSize; \ + __u8 bmControls[n]; \ + __u8 iExtension; \ +} __attribute__ ((packed)) + +/* 3.8.2.2. Video Control Interrupt Endpoint Descriptor */ +struct uvc_control_endpoint_descriptor { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDescriptorSubType; + __u16 wMaxTransferSize; +} __attribute__((__packed__)); + +#define UVC_DT_CONTROL_ENDPOINT_SIZE 5 + +/* 3.9.2.1. Input Header Descriptor */ +struct uvc_input_header_descriptor { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDescriptorSubType; + __u8 bNumFormats; + __u16 wTotalLength; + __u8 bEndpointAddress; + __u8 bmInfo; + __u8 bTerminalLink; + __u8 bStillCaptureMethod; + __u8 bTriggerSupport; + __u8 bTriggerUsage; + __u8 bControlSize; + __u8 bmaControls[]; +} __attribute__((__packed__)); + +#define UVC_DT_INPUT_HEADER_SIZE(n, p) (13+(n*p)) + +#define UVC_INPUT_HEADER_DESCRIPTOR(n, p) \ + uvc_input_header_descriptor_##n_##p + +#define DECLARE_UVC_INPUT_HEADER_DESCRIPTOR(n, p) \ +struct UVC_INPUT_HEADER_DESCRIPTOR(n, p) { \ + __u8 bLength; \ + __u8 bDescriptorType; \ + __u8 bDescriptorSubType; \ + __u8 bNumFormats; \ + __u16 wTotalLength; \ + __u8 bEndpointAddress; \ + __u8 bmInfo; \ + __u8 bTerminalLink; \ + __u8 bStillCaptureMethod; \ + __u8 bTriggerSupport; \ + __u8 bTriggerUsage; \ + __u8 bControlSize; \ + __u8 bmaControls[p][n]; \ +} __attribute__ ((packed)) + +/* 3.9.2.2. Output Header Descriptor */ +struct uvc_output_header_descriptor { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDescriptorSubType; + __u8 bNumFormats; + __u16 wTotalLength; + __u8 bEndpointAddress; + __u8 bTerminalLink; + __u8 bControlSize; + __u8 bmaControls[]; +} __attribute__((__packed__)); + +#define UVC_DT_OUTPUT_HEADER_SIZE(n, p) (9+(n*p)) + +#define UVC_OUTPUT_HEADER_DESCRIPTOR(n, p) \ + uvc_output_header_descriptor_##n_##p + +#define DECLARE_UVC_OUTPUT_HEADER_DESCRIPTOR(n, p) \ +struct UVC_OUTPUT_HEADER_DESCRIPTOR(n, p) { \ + __u8 bLength; \ + __u8 bDescriptorType; \ + __u8 bDescriptorSubType; \ + __u8 bNumFormats; \ + __u16 wTotalLength; \ + __u8 bEndpointAddress; \ + __u8 bTerminalLink; \ + __u8 bControlSize; \ + __u8 bmaControls[p][n]; \ +} __attribute__ ((packed)) + +/* 3.9.2.6. Color matching descriptor */ +struct uvc_color_matching_descriptor { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDescriptorSubType; + __u8 bColorPrimaries; + __u8 bTransferCharacteristics; + __u8 bMatrixCoefficients; +} __attribute__((__packed__)); + +#define UVC_DT_COLOR_MATCHING_SIZE 6 + +/* 4.3.1.1. Video Probe and Commit Controls */ +struct uvc_streaming_control { + __u16 bmHint; + __u8 bFormatIndex; + __u8 bFrameIndex; + __u32 dwFrameInterval; + __u16 wKeyFrameRate; + __u16 wPFrameRate; + __u16 wCompQuality; + __u16 wCompWindowSize; + __u16 wDelay; + __u32 dwMaxVideoFrameSize; + __u32 dwMaxPayloadTransferSize; + __u32 dwClockFrequency; + __u8 bmFramingInfo; + __u8 bPreferedVersion; + __u8 bMinVersion; + __u8 bMaxVersion; +} __attribute__((__packed__)); + +/* Uncompressed Payload - 3.1.1. Uncompressed Video Format Descriptor */ +struct uvc_format_uncompressed { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDescriptorSubType; + __u8 bFormatIndex; + __u8 bNumFrameDescriptors; + __u8 guidFormat[16]; + __u8 bBitsPerPixel; + __u8 bDefaultFrameIndex; + __u8 bAspectRatioX; + __u8 bAspectRatioY; + __u8 bmInterfaceFlags; + __u8 bCopyProtect; +} __attribute__((__packed__)); + +#define UVC_DT_FORMAT_UNCOMPRESSED_SIZE 27 + +/* Uncompressed Payload - 3.1.2. Uncompressed Video Frame Descriptor */ +struct uvc_frame_uncompressed { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDescriptorSubType; + __u8 bFrameIndex; + __u8 bmCapabilities; + __u16 wWidth; + __u16 wHeight; + __u32 dwMinBitRate; + __u32 dwMaxBitRate; + __u32 dwMaxVideoFrameBufferSize; + __u32 dwDefaultFrameInterval; + __u8 bFrameIntervalType; + __u32 dwFrameInterval[]; +} __attribute__((__packed__)); + +#define UVC_DT_FRAME_UNCOMPRESSED_SIZE(n) (26+4*(n)) + +#define UVC_FRAME_UNCOMPRESSED(n) \ + uvc_frame_uncompressed_##n + +#define DECLARE_UVC_FRAME_UNCOMPRESSED(n) \ +struct UVC_FRAME_UNCOMPRESSED(n) { \ + __u8 bLength; \ + __u8 bDescriptorType; \ + __u8 bDescriptorSubType; \ + __u8 bFrameIndex; \ + __u8 bmCapabilities; \ + __u16 wWidth; \ + __u16 wHeight; \ + __u32 dwMinBitRate; \ + __u32 dwMaxBitRate; \ + __u32 dwMaxVideoFrameBufferSize; \ + __u32 dwDefaultFrameInterval; \ + __u8 bFrameIntervalType; \ + __u32 dwFrameInterval[n]; \ +} __attribute__ ((packed)) + +/* MJPEG Payload - 3.1.1. MJPEG Video Format Descriptor */ +struct uvc_format_mjpeg { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDescriptorSubType; + __u8 bFormatIndex; + __u8 bNumFrameDescriptors; + __u8 bmFlags; + __u8 bDefaultFrameIndex; + __u8 bAspectRatioX; + __u8 bAspectRatioY; + __u8 bmInterfaceFlags; + __u8 bCopyProtect; +} __attribute__((__packed__)); + +#define UVC_DT_FORMAT_MJPEG_SIZE 11 + +/* MJPEG Payload - 3.1.2. MJPEG Video Frame Descriptor */ +struct uvc_frame_mjpeg { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDescriptorSubType; + __u8 bFrameIndex; + __u8 bmCapabilities; + __u16 wWidth; + __u16 wHeight; + __u32 dwMinBitRate; + __u32 dwMaxBitRate; + __u32 dwMaxVideoFrameBufferSize; + __u32 dwDefaultFrameInterval; + __u8 bFrameIntervalType; + __u32 dwFrameInterval[]; +} __attribute__((__packed__)); + +#define UVC_DT_FRAME_MJPEG_SIZE(n) (26+4*(n)) + +#define UVC_FRAME_MJPEG(n) \ + uvc_frame_mjpeg_##n + +#define DECLARE_UVC_FRAME_MJPEG(n) \ +struct UVC_FRAME_MJPEG(n) { \ + __u8 bLength; \ + __u8 bDescriptorType; \ + __u8 bDescriptorSubType; \ + __u8 bFrameIndex; \ + __u8 bmCapabilities; \ + __u16 wWidth; \ + __u16 wHeight; \ + __u32 dwMinBitRate; \ + __u32 dwMaxBitRate; \ + __u32 dwMaxVideoFrameBufferSize; \ + __u32 dwDefaultFrameInterval; \ + __u8 bFrameIntervalType; \ + __u32 dwFrameInterval[n]; \ +} __attribute__ ((packed)) + +#endif /* __LINUX_USB_VIDEO_H */ + -- cgit v1.2.3 From 041d81f493d90c940ec41f0ec98bc7c4f2fba431 Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Thu, 4 Oct 2012 11:58:00 +0300 Subject: usb: dwc3: gadget: fix 'endpoint always busy' bug If a USB transfer has already been started, meaning we have already issued StartTransfer command to that particular endpoint, DWC3_EP_BUSY flag has also already been set. When we try to cancel this transfer which is already in controller's cache, we will not receive XferComplete event and we must clear DWC3_EP_BUSY in order to allow subsequent requests to be properly started. The best place to clear that flag is right after issuing DWC3_DEPCMD_ENDTRANSFER. Cc: stable@vger.kernel.org # v3.4 v3.5 v3.6 Reported-by: Moiz Sonasath Signed-off-by: Felipe Balbi --- drivers/usb/dwc3/gadget.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index c9e729a4bf65..7b7deddf6a52 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -1904,7 +1904,7 @@ static void dwc3_stop_active_transfer(struct dwc3 *dwc, u32 epnum) ret = dwc3_send_gadget_ep_cmd(dwc, dep->number, cmd, ¶ms); WARN_ON_ONCE(ret); dep->resource_index = 0; - + dep->flags &= ~DWC3_EP_BUSY; udelay(100); } -- cgit v1.2.3 From 6ff1f3d3bd7c69c62ca5773b1b684bce42eff06a Mon Sep 17 00:00:00 2001 From: Stefano Babic Date: Mon, 15 Oct 2012 11:20:22 +0200 Subject: usb: musb: am35xx: drop spurious unplugging a device On AM3517, tx and rx interrupt are detected together with the disconnect event. This generates a kernel panic in musb_interrupt, because rx / tx are handled after disconnect. This issue was seen on a Technexion's TAM3517 SOM. Unplugging a device, tx / rx interrupts together with disconnect are detected. This brings to kernel panic like this: [ 68.526153] Unable to handle kernel NULL pointer dereference at virtual address 00000011 [ 68.534698] pgd = c0004000 [ 68.537536] [00000011] *pgd=00000000 [ 68.541351] Internal error: Oops: 17 [#1] ARM [ 68.545928] Modules linked in: [ 68.549163] CPU: 0 Not tainted (3.6.0-rc5-00020-g9e05905 #178) [ 68.555694] PC is at rxstate+0x8/0xdc [ 68.559539] LR is at musb_interrupt+0x98/0x858 [ 68.564239] pc : [] lr : [] psr: 40000193 [ 68.564239] sp : ce83fb40 ip : d0906410 fp : 00000000 [ 68.576293] r10: 00000000 r9 : cf3b0e40 r8 : 00000002 [ 68.581817] r7 : 00000019 r6 : 00000001 r5 : 00000001 r4 : 000000d4 [ 68.588684] r3 : 00000000 r2 : 00000000 r1 : ffffffcc r0 : cf23c108 [ 68.595550] Flags: nZcv IRQs off FIQs on Mode SVC_32 ISA ARM Segment ke Note: this behavior is not seen with a USB hub, while it is easy to reproduce connecting a USB-pen directly to the USB-A of the board. Drop tx / rx interrupts if disconnect is detected. Signed-off-by: Stefano Babic CC: Felipe Balbi Cc: stable@vger.kernel.org # 3.5 3.6 Tested-by: Dmitry Lifshitz Tested-by: Igor Grinberg Signed-off-by: Felipe Balbi --- drivers/usb/musb/am35x.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/usb/musb/am35x.c b/drivers/usb/musb/am35x.c index 457f25e62c51..c964d6af178b 100644 --- a/drivers/usb/musb/am35x.c +++ b/drivers/usb/musb/am35x.c @@ -305,6 +305,12 @@ static irqreturn_t am35x_musb_interrupt(int irq, void *hci) ret = IRQ_HANDLED; } + /* Drop spurious RX and TX if device is disconnected */ + if (musb->int_usb & MUSB_INTR_DISCONNECT) { + musb->int_tx = 0; + musb->int_rx = 0; + } + if (musb->int_tx || musb->int_rx || musb->int_usb) ret |= musb_interrupt(musb); -- cgit v1.2.3 From 01b8daf71b2fd2f6ece5f063a089abf4b13f1d6e Mon Sep 17 00:00:00 2001 From: Vivek Gautam Date: Sat, 13 Oct 2012 19:20:18 +0530 Subject: usb: dwc3: shutdown usb_phy when removing the device We call usb_phy_init() from dwc3_core_init() during probe, so adding usb_phy_shutdown() to dwc3_core_exit() while removing the device so we don't keep PHYs turned on, consuming power, unnecessarily. Signed-off-by: Vivek Gautam Signed-off-by: Felipe Balbi --- drivers/usb/dwc3/core.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index b415c0c859d3..c14ebc975ba4 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -409,6 +409,10 @@ static void dwc3_core_exit(struct dwc3 *dwc) { dwc3_event_buffers_cleanup(dwc); dwc3_free_event_buffers(dwc); + + usb_phy_shutdown(dwc->usb2_phy); + usb_phy_shutdown(dwc->usb3_phy); + } #define DWC3_ALIGN_MASK (16 - 1) -- cgit v1.2.3 From 0b2ffb78c0ef83bb03f594fec2adc13ac6ac427b Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Thu, 4 Oct 2012 02:32:41 +0200 Subject: usb: gadget: Make webcam gadget select USB_LIBCOMPOSITE Composite gadget support is now available as a library instead of being built with each gadget. Composite drivers need to select USB_LIBCOMPOSITE. Signed-off-by: Laurent Pinchart Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig index dfb51a45496c..e0ff51b89529 100644 --- a/drivers/usb/gadget/Kconfig +++ b/drivers/usb/gadget/Kconfig @@ -952,6 +952,7 @@ endif config USB_G_WEBCAM tristate "USB Webcam Gadget" depends on VIDEO_DEV + select USB_LIBCOMPOSITE help The Webcam Gadget acts as a composite USB Audio and Video Class device. It provides a userspace API to process UVC control requests -- cgit v1.2.3 From 8282da478966975a5efff3eeb650a49fe67fa14e Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Thu, 4 Oct 2012 02:32:42 +0200 Subject: MAINTAINERS: Add maintainer entry for the USB webcam gadget Signed-off-by: Laurent Pinchart Signed-off-by: Greg Kroah-Hartman --- MAINTAINERS | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index e73060fe0788..bfac52f4fc73 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -7731,6 +7731,13 @@ W: http://www.ideasonboard.org/uvc/ S: Maintained F: drivers/media/usb/uvc/ +USB WEBCAM GADGET +M: Laurent Pinchart +L: linux-usb@vger.kernel.org +S: Maintained +F: drivers/usb/gadget/*uvc*.c +F: drivers/usb/gadget/webcam.c + USB WIRELESS RNDIS DRIVER (rndis_wlan) M: Jussi Kivilinna L: linux-wireless@vger.kernel.org -- cgit v1.2.3 From c2fa3edc58a262dfcb7aea78e24661e90e00098c Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Mon, 15 Oct 2012 23:24:55 -0700 Subject: usb: renesas_usbhs: fixup __usbhs_for_each_pipe 1st pos __usbhs_for_each_pipe() is the macro which moves around each pipe, but it has a bug which didn't care about 1st pipe's position. Because of this bug, it moves around pipe0, pipe2, pipe3 ... even though it requested pipe1, pipe2, pipe3... This patch modifies it. Signed-off-by: Kuninori Morimoto Signed-off-by: Felipe Balbi --- drivers/usb/renesas_usbhs/pipe.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/renesas_usbhs/pipe.h b/drivers/usb/renesas_usbhs/pipe.h index 08786c06dcf1..3d80c7b1fd1b 100644 --- a/drivers/usb/renesas_usbhs/pipe.h +++ b/drivers/usb/renesas_usbhs/pipe.h @@ -54,7 +54,7 @@ struct usbhs_pipe_info { * pipe list */ #define __usbhs_for_each_pipe(start, pos, info, i) \ - for (i = start, pos = (info)->pipe; \ + for (i = start, pos = (info)->pipe + i; \ i < (info)->size; \ i++, pos = (info)->pipe + i) -- cgit v1.2.3 From d5c6a1e024dd5acd6ad2e1a6eb6a2fd5c15c50f1 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Thu, 11 Oct 2012 21:49:38 -0700 Subject: usb: renesas_usbhs: fixup interrupt status clear method When interrupt happened, renesas_usbhs driver gets irq status by usbhs_status_get_each_irq(), and cleared all status by using 0. But, this method is incorrect, since extra interrupt might occur between them. This patch cleared corresponding bits only Signed-off-by: Kuninori Morimoto Signed-off-by: Felipe Balbi --- drivers/usb/renesas_usbhs/mod.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/usb/renesas_usbhs/mod.c b/drivers/usb/renesas_usbhs/mod.c index 35c5208f3249..61933a90e5bf 100644 --- a/drivers/usb/renesas_usbhs/mod.c +++ b/drivers/usb/renesas_usbhs/mod.c @@ -273,9 +273,9 @@ static irqreturn_t usbhs_interrupt(int irq, void *data) usbhs_write(priv, INTSTS0, ~irq_state.intsts0 & INTSTS0_MAGIC); usbhs_write(priv, INTSTS1, ~irq_state.intsts1 & INTSTS1_MAGIC); - usbhs_write(priv, BRDYSTS, 0); - usbhs_write(priv, NRDYSTS, 0); - usbhs_write(priv, BEMPSTS, 0); + usbhs_write(priv, BRDYSTS, ~irq_state.brdysts); + usbhs_write(priv, NRDYSTS, ~irq_state.nrdysts); + usbhs_write(priv, BEMPSTS, ~irq_state.bempsts); /* * call irq callback functions -- cgit v1.2.3 From 69da85edbab5cd42909d3ba65b3dad1c1fb40206 Mon Sep 17 00:00:00 2001 From: Alexandre Pereira da Silva Date: Mon, 15 Oct 2012 09:47:35 -0300 Subject: usb: gadget: lpc32xx_udc: Fix compatibility with STOTG04 The STOTG04 is an replacement for ISP1301. Most of the registers on STOTG04 are the same as on ISP1301, but the register ISP1301_I2C_OTG_CONTROL_2 (address 0x10) doesn't exist on the ST part. This is a work around for this by using the interrupt source register that should behave the same on both parts and has the needed information. Tested-by: Roland Stigge Signed-off-by: Alexandre Pereira da Silva Signed-off-by: Felipe Balbi --- drivers/usb/gadget/lpc32xx_udc.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/usb/gadget/lpc32xx_udc.c b/drivers/usb/gadget/lpc32xx_udc.c index f696fb9b136d..21a9861dabf0 100644 --- a/drivers/usb/gadget/lpc32xx_udc.c +++ b/drivers/usb/gadget/lpc32xx_udc.c @@ -2930,10 +2930,10 @@ static void vbus_work(struct work_struct *work) /* Get the VBUS status from the transceiver */ value = i2c_smbus_read_byte_data(udc->isp1301_i2c_client, - ISP1301_I2C_OTG_CONTROL_2); + ISP1301_I2C_INTERRUPT_SOURCE); /* VBUS on or off? */ - if (value & OTG_B_SESS_VLD) + if (value & INT_SESS_VLD) udc->vbus = 1; else udc->vbus = 0; -- cgit v1.2.3 From 7bdce71822f471433dd3014692e9096996c7b5f0 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 15 Oct 2012 18:20:52 +0200 Subject: USB: ark3116: fix NULL-pointer dereference Fix NULL-pointer dereference at release by replacing attach and release with port_probe and port_remove. Since commit 0998d0631001288 (device-core: Ensure drvdata = NULL when no driver is bound) the port private data is NULL when release is called. Compile-only tested. Cc: Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/ark3116.c | 26 ++++++++++++++------------ 1 file changed, 14 insertions(+), 12 deletions(-) diff --git a/drivers/usb/serial/ark3116.c b/drivers/usb/serial/ark3116.c index cf2522c397d3..bd50a8a41a0f 100644 --- a/drivers/usb/serial/ark3116.c +++ b/drivers/usb/serial/ark3116.c @@ -125,9 +125,6 @@ static inline int calc_divisor(int bps) static int ark3116_attach(struct usb_serial *serial) { - struct usb_serial_port *port = serial->port[0]; - struct ark3116_private *priv; - /* make sure we have our end-points */ if ((serial->num_bulk_in == 0) || (serial->num_bulk_out == 0) || @@ -142,8 +139,15 @@ static int ark3116_attach(struct usb_serial *serial) return -EINVAL; } - priv = kzalloc(sizeof(struct ark3116_private), - GFP_KERNEL); + return 0; +} + +static int ark3116_port_probe(struct usb_serial_port *port) +{ + struct usb_serial *serial = port->serial; + struct ark3116_private *priv; + + priv = kzalloc(sizeof(*priv), GFP_KERNEL); if (!priv) return -ENOMEM; @@ -198,18 +202,15 @@ static int ark3116_attach(struct usb_serial *serial) return 0; } -static void ark3116_release(struct usb_serial *serial) +static int ark3116_port_remove(struct usb_serial_port *port) { - struct usb_serial_port *port = serial->port[0]; struct ark3116_private *priv = usb_get_serial_port_data(port); /* device is closed, so URBs and DMA should be down */ - - usb_set_serial_port_data(port, NULL); - mutex_destroy(&priv->hw_lock); - kfree(priv); + + return 0; } static void ark3116_init_termios(struct tty_struct *tty) @@ -723,7 +724,8 @@ static struct usb_serial_driver ark3116_device = { .id_table = id_table, .num_ports = 1, .attach = ark3116_attach, - .release = ark3116_release, + .port_probe = ark3116_port_probe, + .port_remove = ark3116_port_remove, .set_termios = ark3116_set_termios, .init_termios = ark3116_init_termios, .ioctl = ark3116_ioctl, -- cgit v1.2.3 From a9556040119a63d06fd5238d47f5b683fba4178b Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 15 Oct 2012 18:20:54 +0200 Subject: USB: cyberjack: fix port-data memory leak Fix port-data memory leak by replacing attach and release with port_probe and port_remove. Since commit 0998d0631001288 (device-core: Ensure drvdata = NULL when no driver is bound) the port private data is no longer freed at release as it is no longer accessible. Note that the write waitqueue was initialised but never used. Compile-only tested. Cc: Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/cyberjack.c | 49 ++++++++++++++++-------------------------- 1 file changed, 19 insertions(+), 30 deletions(-) diff --git a/drivers/usb/serial/cyberjack.c b/drivers/usb/serial/cyberjack.c index 2a7aecc72237..4ee77dcbe690 100644 --- a/drivers/usb/serial/cyberjack.c +++ b/drivers/usb/serial/cyberjack.c @@ -55,9 +55,9 @@ #define CYBERJACK_PRODUCT_ID 0x0100 /* Function prototypes */ -static int cyberjack_startup(struct usb_serial *serial); static void cyberjack_disconnect(struct usb_serial *serial); -static void cyberjack_release(struct usb_serial *serial); +static int cyberjack_port_probe(struct usb_serial_port *port); +static int cyberjack_port_remove(struct usb_serial_port *port); static int cyberjack_open(struct tty_struct *tty, struct usb_serial_port *port); static void cyberjack_close(struct usb_serial_port *port); @@ -83,9 +83,9 @@ static struct usb_serial_driver cyberjack_device = { .description = "Reiner SCT Cyberjack USB card reader", .id_table = id_table, .num_ports = 1, - .attach = cyberjack_startup, .disconnect = cyberjack_disconnect, - .release = cyberjack_release, + .port_probe = cyberjack_port_probe, + .port_remove = cyberjack_port_remove, .open = cyberjack_open, .close = cyberjack_close, .write = cyberjack_write, @@ -107,56 +107,45 @@ struct cyberjack_private { short wrsent; /* Data already sent */ }; -/* do some startup allocations not currently performed by usb_serial_probe() */ -static int cyberjack_startup(struct usb_serial *serial) +static int cyberjack_port_probe(struct usb_serial_port *port) { struct cyberjack_private *priv; - int i; + int result; - /* allocate the private data structure */ priv = kmalloc(sizeof(struct cyberjack_private), GFP_KERNEL); if (!priv) return -ENOMEM; - /* set initial values */ spin_lock_init(&priv->lock); priv->rdtodo = 0; priv->wrfilled = 0; priv->wrsent = 0; - usb_set_serial_port_data(serial->port[0], priv); - init_waitqueue_head(&serial->port[0]->write_wait); + usb_set_serial_port_data(port, priv); - for (i = 0; i < serial->num_ports; ++i) { - int result; - result = usb_submit_urb(serial->port[i]->interrupt_in_urb, - GFP_KERNEL); - if (result) - dev_err(&serial->dev->dev, - "usb_submit_urb(read int) failed\n"); - dev_dbg(&serial->dev->dev, "%s - usb_submit_urb(int urb)\n", - __func__); - } + result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL); + if (result) + dev_err(&port->dev, "usb_submit_urb(read int) failed\n"); return 0; } -static void cyberjack_disconnect(struct usb_serial *serial) +static int cyberjack_port_remove(struct usb_serial_port *port) { - int i; + struct cyberjack_private *priv; - for (i = 0; i < serial->num_ports; ++i) - usb_kill_urb(serial->port[i]->interrupt_in_urb); + priv = usb_get_serial_port_data(port); + kfree(priv); + + return 0; } -static void cyberjack_release(struct usb_serial *serial) +static void cyberjack_disconnect(struct usb_serial *serial) { int i; - for (i = 0; i < serial->num_ports; ++i) { - /* My special items, the standard routines free my urbs */ - kfree(usb_get_serial_port_data(serial->port[i])); - } + for (i = 0; i < serial->num_ports; ++i) + usb_kill_urb(serial->port[i]->interrupt_in_urb); } static int cyberjack_open(struct tty_struct *tty, -- cgit v1.2.3 From fa919751a2d26a88140fc5810124dd81644efe51 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 15 Oct 2012 18:20:53 +0200 Subject: USB: belkin_sa: fix port-data memory leak Fix port-data memory leak by replacing attach and release with port_probe and port_remove. Since commit 0998d0631001288 (device-core: Ensure drvdata = NULL when no driver is bound) the port private data is no longer freed at release as it is no longer accessible. Note that the write waitqueue was initialised but never used. Compile-only tested. Cc: Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/belkin_sa.c | 31 +++++++++++++++---------------- 1 file changed, 15 insertions(+), 16 deletions(-) diff --git a/drivers/usb/serial/belkin_sa.c b/drivers/usb/serial/belkin_sa.c index 99449424193f..ea29556f0d72 100644 --- a/drivers/usb/serial/belkin_sa.c +++ b/drivers/usb/serial/belkin_sa.c @@ -45,8 +45,8 @@ #define DRIVER_DESC "USB Belkin Serial converter driver" /* function prototypes for a Belkin USB Serial Adapter F5U103 */ -static int belkin_sa_startup(struct usb_serial *serial); -static void belkin_sa_release(struct usb_serial *serial); +static int belkin_sa_port_probe(struct usb_serial_port *port); +static int belkin_sa_port_remove(struct usb_serial_port *port); static int belkin_sa_open(struct tty_struct *tty, struct usb_serial_port *port); static void belkin_sa_close(struct usb_serial_port *port); @@ -88,8 +88,8 @@ static struct usb_serial_driver belkin_device = { .break_ctl = belkin_sa_break_ctl, .tiocmget = belkin_sa_tiocmget, .tiocmset = belkin_sa_tiocmset, - .attach = belkin_sa_startup, - .release = belkin_sa_release, + .port_probe = belkin_sa_port_probe, + .port_remove = belkin_sa_port_remove, }; static struct usb_serial_driver * const serial_drivers[] = { @@ -118,17 +118,15 @@ struct belkin_sa_private { (c), BELKIN_SA_SET_REQUEST_TYPE, \ (v), 0, NULL, 0, WDR_TIMEOUT) -/* do some startup allocations not currently performed by usb_serial_probe() */ -static int belkin_sa_startup(struct usb_serial *serial) +static int belkin_sa_port_probe(struct usb_serial_port *port) { - struct usb_device *dev = serial->dev; + struct usb_device *dev = port->serial->dev; struct belkin_sa_private *priv; - /* allocate the private data structure */ priv = kmalloc(sizeof(struct belkin_sa_private), GFP_KERNEL); if (!priv) - return -1; /* error */ - /* set initial values for control structures */ + return -ENOMEM; + spin_lock_init(&priv->lock); priv->control_state = 0; priv->last_lsr = 0; @@ -140,18 +138,19 @@ static int belkin_sa_startup(struct usb_serial *serial) le16_to_cpu(dev->descriptor.bcdDevice), priv->bad_flow_control); - init_waitqueue_head(&serial->port[0]->write_wait); - usb_set_serial_port_data(serial->port[0], priv); + usb_set_serial_port_data(port, priv); return 0; } -static void belkin_sa_release(struct usb_serial *serial) +static int belkin_sa_port_remove(struct usb_serial_port *port) { - int i; + struct belkin_sa_private *priv; - for (i = 0; i < serial->num_ports; ++i) - kfree(usb_get_serial_port_data(serial->port[i])); + priv = usb_get_serial_port_data(port); + kfree(priv); + + return 0; } static int belkin_sa_open(struct tty_struct *tty, -- cgit v1.2.3 From 4295fe7791a1b20c90cbaaa6f23f2fb94218b8a7 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 15 Oct 2012 15:47:20 +0200 Subject: USB: cp210x: fix port-data memory leak Fix port data memory leak by replacing port private data with serial private data. Since commit 0998d0631001288 (device-core: Ensure drvdata = NULL when no driver is bound) the port private data is no longer freed at release. The private data is used to store the control interface number, but as this is the same for all ports on an interface it should be stored as usb-serial data anyway. Cc: Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/cp210x.c | 40 +++++++++++++++++----------------------- 1 file changed, 17 insertions(+), 23 deletions(-) diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c index 28af5acc3360..eb033fc92a15 100644 --- a/drivers/usb/serial/cp210x.c +++ b/drivers/usb/serial/cp210x.c @@ -162,7 +162,7 @@ static const struct usb_device_id id_table[] = { MODULE_DEVICE_TABLE(usb, id_table); -struct cp210x_port_private { +struct cp210x_serial_private { __u8 bInterfaceNumber; }; @@ -276,7 +276,7 @@ static int cp210x_get_config(struct usb_serial_port *port, u8 request, unsigned int *data, int size) { struct usb_serial *serial = port->serial; - struct cp210x_port_private *port_priv = usb_get_serial_port_data(port); + struct cp210x_serial_private *spriv = usb_get_serial_data(serial); __le32 *buf; int result, i, length; @@ -292,7 +292,7 @@ static int cp210x_get_config(struct usb_serial_port *port, u8 request, /* Issue the request, attempting to read 'size' bytes */ result = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), request, REQTYPE_INTERFACE_TO_HOST, 0x0000, - port_priv->bInterfaceNumber, buf, size, + spriv->bInterfaceNumber, buf, size, USB_CTRL_GET_TIMEOUT); /* Convert data into an array of integers */ @@ -323,7 +323,7 @@ static int cp210x_set_config(struct usb_serial_port *port, u8 request, unsigned int *data, int size) { struct usb_serial *serial = port->serial; - struct cp210x_port_private *port_priv = usb_get_serial_port_data(port); + struct cp210x_serial_private *spriv = usb_get_serial_data(serial); __le32 *buf; int result, i, length; @@ -345,13 +345,13 @@ static int cp210x_set_config(struct usb_serial_port *port, u8 request, result = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), request, REQTYPE_HOST_TO_INTERFACE, 0x0000, - port_priv->bInterfaceNumber, buf, size, + spriv->bInterfaceNumber, buf, size, USB_CTRL_SET_TIMEOUT); } else { result = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), request, REQTYPE_HOST_TO_INTERFACE, data[0], - port_priv->bInterfaceNumber, NULL, 0, + spriv->bInterfaceNumber, NULL, 0, USB_CTRL_SET_TIMEOUT); } @@ -845,36 +845,30 @@ static void cp210x_break_ctl (struct tty_struct *tty, int break_state) static int cp210x_startup(struct usb_serial *serial) { - struct cp210x_port_private *port_priv; - int i; + struct usb_host_interface *cur_altsetting; + struct cp210x_serial_private *spriv; /* cp210x buffers behave strangely unless device is reset */ usb_reset_device(serial->dev); - for (i = 0; i < serial->num_ports; i++) { - port_priv = kzalloc(sizeof(*port_priv), GFP_KERNEL); - if (!port_priv) - return -ENOMEM; + spriv = kzalloc(sizeof(*spriv), GFP_KERNEL); + if (!spriv) + return -ENOMEM; - port_priv->bInterfaceNumber = - serial->interface->cur_altsetting->desc.bInterfaceNumber; + cur_altsetting = serial->interface->cur_altsetting; + spriv->bInterfaceNumber = cur_altsetting->desc.bInterfaceNumber; - usb_set_serial_port_data(serial->port[i], port_priv); - } + usb_set_serial_data(serial, spriv); return 0; } static void cp210x_release(struct usb_serial *serial) { - struct cp210x_port_private *port_priv; - int i; + struct cp210x_serial_private *spriv; - for (i = 0; i < serial->num_ports; i++) { - port_priv = usb_get_serial_port_data(serial->port[i]); - kfree(port_priv); - usb_set_serial_port_data(serial->port[i], NULL); - } + spriv = usb_get_serial_data(serial); + kfree(spriv); } module_usb_serial_driver(serial_drivers, id_table); -- cgit v1.2.3 From 8bf769eb5f6efc33f95088850f33fcc05d28b508 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 15 Oct 2012 15:47:21 +0200 Subject: USB: pl2303: fix port-data memory leak Fix port-data memory leak by allocating and freeing port data in port_probe/remove rather than in attach/release, and by introducing serial private data to store the device type which is interface rather than port specific. Since commit 0998d0631001288 (device-core: Ensure drvdata = NULL when no driver is bound) the port private data is no longer freed at release. Cc: Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/pl2303.c | 90 +++++++++++++++++++++++++++------------------ 1 file changed, 54 insertions(+), 36 deletions(-) diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c index 892ebdc7a364..600241901361 100644 --- a/drivers/usb/serial/pl2303.c +++ b/drivers/usb/serial/pl2303.c @@ -133,12 +133,15 @@ enum pl2303_type { HX, /* HX version of the pl2303 chip */ }; +struct pl2303_serial_private { + enum pl2303_type type; +}; + struct pl2303_private { spinlock_t lock; wait_queue_head_t delta_msr_wait; u8 line_control; u8 line_status; - enum pl2303_type type; }; static int pl2303_vendor_read(__u16 value, __u16 index, @@ -167,14 +170,19 @@ static int pl2303_vendor_write(__u16 value, __u16 index, static int pl2303_startup(struct usb_serial *serial) { - struct pl2303_private *priv; + struct pl2303_serial_private *spriv; enum pl2303_type type = type_0; unsigned char *buf; - int i; + + spriv = kzalloc(sizeof(*spriv), GFP_KERNEL); + if (!spriv) + return -ENOMEM; buf = kmalloc(10, GFP_KERNEL); - if (buf == NULL) + if (!buf) { + kfree(spriv); return -ENOMEM; + } if (serial->dev->descriptor.bDeviceClass == 0x02) type = type_0; @@ -186,15 +194,8 @@ static int pl2303_startup(struct usb_serial *serial) type = type_1; dev_dbg(&serial->interface->dev, "device type: %d\n", type); - for (i = 0; i < serial->num_ports; ++i) { - priv = kzalloc(sizeof(struct pl2303_private), GFP_KERNEL); - if (!priv) - goto cleanup; - spin_lock_init(&priv->lock); - init_waitqueue_head(&priv->delta_msr_wait); - priv->type = type; - usb_set_serial_port_data(serial->port[i], priv); - } + spriv->type = type; + usb_set_serial_data(serial, spriv); pl2303_vendor_read(0x8484, 0, serial, buf); pl2303_vendor_write(0x0404, 0, serial); @@ -213,15 +214,40 @@ static int pl2303_startup(struct usb_serial *serial) kfree(buf); return 0; +} -cleanup: - kfree(buf); - for (--i; i >= 0; --i) { - priv = usb_get_serial_port_data(serial->port[i]); - kfree(priv); - usb_set_serial_port_data(serial->port[i], NULL); - } - return -ENOMEM; +static void pl2303_release(struct usb_serial *serial) +{ + struct pl2303_serial_private *spriv; + + spriv = usb_get_serial_data(serial); + kfree(spriv); +} + +static int pl2303_port_probe(struct usb_serial_port *port) +{ + struct pl2303_private *priv; + + priv = kzalloc(sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + spin_lock_init(&priv->lock); + init_waitqueue_head(&priv->delta_msr_wait); + + usb_set_serial_port_data(port, priv); + + return 0; +} + +static int pl2303_port_remove(struct usb_serial_port *port) +{ + struct pl2303_private *priv; + + priv = usb_get_serial_port_data(port); + kfree(priv); + + return 0; } static int set_control_lines(struct usb_device *dev, u8 value) @@ -240,6 +266,7 @@ static void pl2303_set_termios(struct tty_struct *tty, struct usb_serial_port *port, struct ktermios *old_termios) { struct usb_serial *serial = port->serial; + struct pl2303_serial_private *spriv = usb_get_serial_data(serial); struct pl2303_private *priv = usb_get_serial_port_data(port); unsigned long flags; unsigned int cflag; @@ -323,7 +350,7 @@ static void pl2303_set_termios(struct tty_struct *tty, } if (baud > 1228800) { /* type_0, type_1 only support up to 1228800 baud */ - if (priv->type != HX) + if (spriv->type != HX) baud = 1228800; else if (baud > 6000000) baud = 6000000; @@ -426,7 +453,7 @@ static void pl2303_set_termios(struct tty_struct *tty, buf[0], buf[1], buf[2], buf[3], buf[4], buf[5], buf[6]); if (cflag & CRTSCTS) { - if (priv->type == HX) + if (spriv->type == HX) pl2303_vendor_write(0x0, 0x61, serial); else pl2303_vendor_write(0x0, 0x41, serial); @@ -468,10 +495,10 @@ static int pl2303_open(struct tty_struct *tty, struct usb_serial_port *port) { struct ktermios tmp_termios; struct usb_serial *serial = port->serial; - struct pl2303_private *priv = usb_get_serial_port_data(port); + struct pl2303_serial_private *spriv = usb_get_serial_data(serial); int result; - if (priv->type != HX) { + if (spriv->type != HX) { usb_clear_halt(serial->dev, port->write_urb->pipe); usb_clear_halt(serial->dev, port->read_urb->pipe); } else { @@ -655,17 +682,6 @@ static void pl2303_break_ctl(struct tty_struct *tty, int break_state) dev_err(&port->dev, "error sending break = %d\n", result); } -static void pl2303_release(struct usb_serial *serial) -{ - int i; - struct pl2303_private *priv; - - for (i = 0; i < serial->num_ports; ++i) { - priv = usb_get_serial_port_data(serial->port[i]); - kfree(priv); - } -} - static void pl2303_update_line_status(struct usb_serial_port *port, unsigned char *data, unsigned int actual_length) @@ -827,6 +843,8 @@ static struct usb_serial_driver pl2303_device = { .read_int_callback = pl2303_read_int_callback, .attach = pl2303_startup, .release = pl2303_release, + .port_probe = pl2303_port_probe, + .port_remove = pl2303_port_remove, }; static struct usb_serial_driver * const serial_drivers[] = { -- cgit v1.2.3 From db5c8b524444d4fc6b1f32d368a50a3729e50002 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Wed, 10 Oct 2012 14:10:21 -0400 Subject: USB: fix port probing and removal in garmin_gps This patch (as1615) fixes a bug in the Garmin USB serial driver. It uses attach, disconnect, and release routines to carry out actions that should be handled by port_probe and port_remove routines, because they access port-specific data. The bug causes an oops when the device in unplugged, because the private data for each port structure now gets erased when the port is unbound from the driver, resulting in a null-pointer dereference. Signed-off-by: Alan Stern Reported--by: Markus Schauler Tested-by: Markus Schauler Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/garmin_gps.c | 24 +++++++----------------- 1 file changed, 7 insertions(+), 17 deletions(-) diff --git a/drivers/usb/serial/garmin_gps.c b/drivers/usb/serial/garmin_gps.c index 3ee92648c02d..203358d7e7bc 100644 --- a/drivers/usb/serial/garmin_gps.c +++ b/drivers/usb/serial/garmin_gps.c @@ -1405,11 +1405,10 @@ static void timeout_handler(unsigned long data) -static int garmin_attach(struct usb_serial *serial) +static int garmin_port_probe(struct usb_serial_port *port) { - int status = 0; - struct usb_serial_port *port = serial->port[0]; - struct garmin_data *garmin_data_p = NULL; + int status; + struct garmin_data *garmin_data_p; garmin_data_p = kzalloc(sizeof(struct garmin_data), GFP_KERNEL); if (garmin_data_p == NULL) { @@ -1434,22 +1433,14 @@ static int garmin_attach(struct usb_serial *serial) } -static void garmin_disconnect(struct usb_serial *serial) +static int garmin_port_remove(struct usb_serial_port *port) { - struct usb_serial_port *port = serial->port[0]; struct garmin_data *garmin_data_p = usb_get_serial_port_data(port); usb_kill_urb(port->interrupt_in_urb); del_timer_sync(&garmin_data_p->timer); -} - - -static void garmin_release(struct usb_serial *serial) -{ - struct usb_serial_port *port = serial->port[0]; - struct garmin_data *garmin_data_p = usb_get_serial_port_data(port); - kfree(garmin_data_p); + return 0; } @@ -1466,9 +1457,8 @@ static struct usb_serial_driver garmin_device = { .close = garmin_close, .throttle = garmin_throttle, .unthrottle = garmin_unthrottle, - .attach = garmin_attach, - .disconnect = garmin_disconnect, - .release = garmin_release, + .port_probe = garmin_port_probe, + .port_remove = garmin_port_remove, .write = garmin_write, .write_room = garmin_write_room, .write_bulk_callback = garmin_write_bulk_callback, -- cgit v1.2.3 From 2c78040c3e2735b8286bbb848db0372b8d408e2d Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Fri, 5 Oct 2012 15:09:38 -0700 Subject: USB: usb.h: remove dbg() macro There are no users of this macro anymore in the kernel tree, so finally delete it. Signed-off-by: Greg Kroah-Hartman --- include/linux/usb.h | 11 ----------- 1 file changed, 11 deletions(-) diff --git a/include/linux/usb.h b/include/linux/usb.h index 07915a32fb9d..10278d18709c 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -1778,17 +1778,6 @@ static inline int usb_translate_errors(int error_code) extern void usb_register_notify(struct notifier_block *nb); extern void usb_unregister_notify(struct notifier_block *nb); -#ifdef DEBUG -#define dbg(format, arg...) \ - printk(KERN_DEBUG "%s: " format "\n", __FILE__, ##arg) -#else -#define dbg(format, arg...) \ -do { \ - if (0) \ - printk(KERN_DEBUG "%s: " format "\n", __FILE__, ##arg); \ -} while (0) -#endif - /* debugfs stuff */ extern struct dentry *usb_debug_root; -- cgit v1.2.3 From 014639003c77a51fc319c9fdf225e7747cb6e18d Mon Sep 17 00:00:00 2001 From: Henrik Rydberg Date: Sat, 13 Oct 2012 12:20:36 +0200 Subject: usbdevfs: Fix broken scatter-gather transfer The handling of large output bulk transfers is broken; the same user page is read over and over again. Fixed with this patch. Cc: stable Acked-by: Peter Stuge Acked-by: Hans de Goede Acked-by: Alan Stern Signed-off-by: Henrik Rydberg Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/devio.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c index e0356cb859b5..b78fbe222b72 100644 --- a/drivers/usb/core/devio.c +++ b/drivers/usb/core/devio.c @@ -1348,6 +1348,7 @@ static int proc_do_submiturb(struct dev_state *ps, struct usbdevfs_urb *uurb, ret = -EFAULT; goto error; } + uurb->buffer += u; } totlen -= u; } -- cgit v1.2.3 From c5211187f7ff8e8dbff4ebf7c011ac4c0ffe319c Mon Sep 17 00:00:00 2001 From: Ming Lei Date: Tue, 16 Oct 2012 21:21:21 +0800 Subject: USB: cdc-acm: fix pipe type of write endpoint If the write endpoint is interrupt type, usb_sndintpipe() should be passed to usb_fill_int_urb() instead of usb_sndbulkpipe(). Cc: Oliver Neukum Signed-off-by: Ming Lei Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/class/cdc-acm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index 981f2132d128..572f4e7bd3ff 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -1233,7 +1233,7 @@ made_compressed_probe: if (usb_endpoint_xfer_int(epwrite)) usb_fill_int_urb(snd->urb, usb_dev, - usb_sndbulkpipe(usb_dev, epwrite->bEndpointAddress), + usb_sndintpipe(usb_dev, epwrite->bEndpointAddress), NULL, acm->writesize, acm_write_bulk, snd, epwrite->bInterval); else usb_fill_bulk_urb(snd->urb, usb_dev, -- cgit v1.2.3 From 09eeffb70c086692064f4224490d1cd2ffe43bdd Mon Sep 17 00:00:00 2001 From: Tony Prisk Date: Sun, 14 Oct 2012 16:22:34 +1300 Subject: usb: Missing dma_mask in uhci-platform.c when probed from device-tree Device-tree probed devices don't get a dev.dma_mask set. This patch sets a default 32bit mask on platforms using devicetree. Without this patch, arch-vt8500 cannot detect uhci attached devices. Signed-off-by: Tony Prisk Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/uhci-platform.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/drivers/usb/host/uhci-platform.c b/drivers/usb/host/uhci-platform.c index e4780491df4a..68ebf20e1519 100644 --- a/drivers/usb/host/uhci-platform.c +++ b/drivers/usb/host/uhci-platform.c @@ -60,6 +60,7 @@ static const struct hc_driver uhci_platform_hc_driver = { .hub_control = uhci_hub_control, }; +static u64 platform_uhci_dma_mask = DMA_BIT_MASK(32); static int __devinit uhci_hcd_platform_probe(struct platform_device *pdev) { @@ -71,6 +72,14 @@ static int __devinit uhci_hcd_platform_probe(struct platform_device *pdev) if (usb_disabled()) return -ENODEV; + /* + * Right now device-tree probed devices don't get dma_mask set. + * Since shared usb code relies on it, set it here for now. + * Once we have dma capability bindings this can go away. + */ + if (!pdev->dev.dma_mask) + pdev->dev.dma_mask = &platform_uhci_dma_mask; + hcd = usb_create_hcd(&uhci_platform_hc_driver, &pdev->dev, pdev->name); if (!hcd) -- cgit v1.2.3 From 6e1babb3ff2651376f2e9843569fcb39cfe4686b Mon Sep 17 00:00:00 2001 From: Tony Prisk Date: Sun, 14 Oct 2012 16:22:35 +1300 Subject: usb: Missing dma_mask in ehci-vt8500.c when probed from device-tree Device-tree probed devices don't get a dev.dma_mask set. This patch sets a default 32bit mask on arch-vt8500 when using devicetree. Without this patch, arch-vt8500 cannot detect ehci attached devices. Signed-off-by: Tony Prisk Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ehci-vt8500.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/drivers/usb/host/ehci-vt8500.c b/drivers/usb/host/ehci-vt8500.c index 96722bfebc84..d3c9a3e397b9 100644 --- a/drivers/usb/host/ehci-vt8500.c +++ b/drivers/usb/host/ehci-vt8500.c @@ -85,6 +85,8 @@ static const struct hc_driver vt8500_ehci_hc_driver = { .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete, }; +static u64 vt8500_ehci_dma_mask = DMA_BIT_MASK(32); + static int vt8500_ehci_drv_probe(struct platform_device *pdev) { struct usb_hcd *hcd; @@ -95,6 +97,14 @@ static int vt8500_ehci_drv_probe(struct platform_device *pdev) if (usb_disabled()) return -ENODEV; + /* + * Right now device-tree probed devices don't get dma_mask set. + * Since shared usb code relies on it, set it here for now. + * Once we have dma capability bindings this can go away. + */ + if (!pdev->dev.dma_mask) + pdev->dev.dma_mask = &vt8500_ehci_dma_mask; + if (pdev->resource[1].flags != IORESOURCE_IRQ) { pr_debug("resource[1] is not IORESOURCE_IRQ"); return -ENOMEM; -- cgit v1.2.3 From 301a29da6e891e7eb95c843af0ecdbe86d01f723 Mon Sep 17 00:00:00 2001 From: Nicolas Boullis Date: Tue, 16 Oct 2012 00:06:23 +0200 Subject: usb: acm: fix the computation of the number of data bits The current code assumes that CSIZE is 0000060, which appears to be wrong on some arches (such as powerpc). Signed-off-by: Nicolas Boullis Acked-by: Oliver Neukum Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/class/cdc-acm.c | 20 +++++++++++++++----- 1 file changed, 15 insertions(+), 5 deletions(-) diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index 572f4e7bd3ff..6e49ec6f3adc 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -817,10 +817,6 @@ static const __u32 acm_tty_speed[] = { 2500000, 3000000, 3500000, 4000000 }; -static const __u8 acm_tty_size[] = { - 5, 6, 7, 8 -}; - static void acm_tty_set_termios(struct tty_struct *tty, struct ktermios *termios_old) { @@ -834,7 +830,21 @@ static void acm_tty_set_termios(struct tty_struct *tty, newline.bParityType = termios->c_cflag & PARENB ? (termios->c_cflag & PARODD ? 1 : 2) + (termios->c_cflag & CMSPAR ? 2 : 0) : 0; - newline.bDataBits = acm_tty_size[(termios->c_cflag & CSIZE) >> 4]; + switch (termios->c_cflag & CSIZE) { + case CS5: + newline.bDataBits = 5; + break; + case CS6: + newline.bDataBits = 6; + break; + case CS7: + newline.bDataBits = 7; + break; + case CS8: + default: + newline.bDataBits = 8; + break; + } /* FIXME: Needs to clear unsupported bits in the termios */ acm->clocal = ((termios->c_cflag & CLOCAL) != 0); -- cgit v1.2.3 From 5c1a0f418d8d985f3a62849bcac43fc5404cc592 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Wed, 17 Oct 2012 13:34:55 +0200 Subject: USB: cypress_m8: fix port-data memory leak Fix port-data memory leak by replacing attach and release with port_probe and port_remove. Since commit 0998d0631001288 (device-core: Ensure drvdata = NULL when no driver is bound) the port private data is no longer freed at release as it is no longer accessible. Compile-only tested. Cc: Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/cypress_m8.c | 75 ++++++++++++++++++++--------------------- 1 file changed, 37 insertions(+), 38 deletions(-) diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c index 1befce21e173..f0da1279c114 100644 --- a/drivers/usb/serial/cypress_m8.c +++ b/drivers/usb/serial/cypress_m8.c @@ -123,10 +123,10 @@ struct cypress_private { }; /* function prototypes for the Cypress USB to serial device */ -static int cypress_earthmate_startup(struct usb_serial *serial); -static int cypress_hidcom_startup(struct usb_serial *serial); -static int cypress_ca42v2_startup(struct usb_serial *serial); -static void cypress_release(struct usb_serial *serial); +static int cypress_earthmate_port_probe(struct usb_serial_port *port); +static int cypress_hidcom_port_probe(struct usb_serial_port *port); +static int cypress_ca42v2_port_probe(struct usb_serial_port *port); +static int cypress_port_remove(struct usb_serial_port *port); static int cypress_open(struct tty_struct *tty, struct usb_serial_port *port); static void cypress_close(struct usb_serial_port *port); static void cypress_dtr_rts(struct usb_serial_port *port, int on); @@ -156,8 +156,8 @@ static struct usb_serial_driver cypress_earthmate_device = { .description = "DeLorme Earthmate USB", .id_table = id_table_earthmate, .num_ports = 1, - .attach = cypress_earthmate_startup, - .release = cypress_release, + .port_probe = cypress_earthmate_port_probe, + .port_remove = cypress_port_remove, .open = cypress_open, .close = cypress_close, .dtr_rts = cypress_dtr_rts, @@ -182,8 +182,8 @@ static struct usb_serial_driver cypress_hidcom_device = { .description = "HID->COM RS232 Adapter", .id_table = id_table_cyphidcomrs232, .num_ports = 1, - .attach = cypress_hidcom_startup, - .release = cypress_release, + .port_probe = cypress_hidcom_port_probe, + .port_remove = cypress_port_remove, .open = cypress_open, .close = cypress_close, .dtr_rts = cypress_dtr_rts, @@ -208,8 +208,8 @@ static struct usb_serial_driver cypress_ca42v2_device = { .description = "Nokia CA-42 V2 Adapter", .id_table = id_table_nokiaca42v2, .num_ports = 1, - .attach = cypress_ca42v2_startup, - .release = cypress_release, + .port_probe = cypress_ca42v2_port_probe, + .port_remove = cypress_port_remove, .open = cypress_open, .close = cypress_close, .dtr_rts = cypress_dtr_rts, @@ -438,10 +438,10 @@ static void cypress_set_dead(struct usb_serial_port *port) *****************************************************************************/ -static int generic_startup(struct usb_serial *serial) +static int cypress_generic_port_probe(struct usb_serial_port *port) { + struct usb_serial *serial = port->serial; struct cypress_private *priv; - struct usb_serial_port *port = serial->port[0]; priv = kzalloc(sizeof(struct cypress_private), GFP_KERNEL); if (!priv) @@ -490,14 +490,16 @@ static int generic_startup(struct usb_serial *serial) } -static int cypress_earthmate_startup(struct usb_serial *serial) +static int cypress_earthmate_port_probe(struct usb_serial_port *port) { + struct usb_serial *serial = port->serial; struct cypress_private *priv; - struct usb_serial_port *port = serial->port[0]; + int ret; - if (generic_startup(serial)) { + ret = cypress_generic_port_probe(port); + if (ret) { dev_dbg(&port->dev, "%s - Failed setting up port\n", __func__); - return 1; + return ret; } priv = usb_get_serial_port_data(port); @@ -518,56 +520,53 @@ static int cypress_earthmate_startup(struct usb_serial *serial) } return 0; -} /* cypress_earthmate_startup */ - +} -static int cypress_hidcom_startup(struct usb_serial *serial) +static int cypress_hidcom_port_probe(struct usb_serial_port *port) { struct cypress_private *priv; - struct usb_serial_port *port = serial->port[0]; + int ret; - if (generic_startup(serial)) { + ret = cypress_generic_port_probe(port); + if (ret) { dev_dbg(&port->dev, "%s - Failed setting up port\n", __func__); - return 1; + return ret; } priv = usb_get_serial_port_data(port); priv->chiptype = CT_CYPHIDCOM; return 0; -} /* cypress_hidcom_startup */ - +} -static int cypress_ca42v2_startup(struct usb_serial *serial) +static int cypress_ca42v2_port_probe(struct usb_serial_port *port) { struct cypress_private *priv; - struct usb_serial_port *port = serial->port[0]; + int ret; - if (generic_startup(serial)) { + ret = cypress_generic_port_probe(port); + if (ret) { dev_dbg(&port->dev, "%s - Failed setting up port\n", __func__); - return 1; + return ret; } priv = usb_get_serial_port_data(port); priv->chiptype = CT_CA42V2; return 0; -} /* cypress_ca42v2_startup */ - +} -static void cypress_release(struct usb_serial *serial) +static int cypress_port_remove(struct usb_serial_port *port) { struct cypress_private *priv; - /* all open ports are closed at this point */ - priv = usb_get_serial_port_data(serial->port[0]); + priv = usb_get_serial_port_data(port); - if (priv) { - kfifo_free(&priv->write_fifo); - kfree(priv); - } -} + kfifo_free(&priv->write_fifo); + kfree(priv); + return 0; +} static int cypress_open(struct tty_struct *tty, struct usb_serial_port *port) { -- cgit v1.2.3 From 95940a04bfe8a4d246f4ca17c6a3b00148bdead0 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Wed, 17 Oct 2012 13:35:02 +0200 Subject: USB: kobil_sct: fix port-data memory leak Fix port-data memory leak by replacing attach and release with port_probe and port_remove. Since commit 0998d0631001288 (device-core: Ensure drvdata = NULL when no driver is bound) the port private data is no longer freed at release as it is no longer accessible. Compile-only tested. Cc: Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/kobil_sct.c | 23 +++++++++++++---------- 1 file changed, 13 insertions(+), 10 deletions(-) diff --git a/drivers/usb/serial/kobil_sct.c b/drivers/usb/serial/kobil_sct.c index 5c4d2fbd4e11..c9ca7a5b12e0 100644 --- a/drivers/usb/serial/kobil_sct.c +++ b/drivers/usb/serial/kobil_sct.c @@ -54,8 +54,8 @@ /* Function prototypes */ -static int kobil_startup(struct usb_serial *serial); -static void kobil_release(struct usb_serial *serial); +static int kobil_port_probe(struct usb_serial_port *probe); +static int kobil_port_remove(struct usb_serial_port *probe); static int kobil_open(struct tty_struct *tty, struct usb_serial_port *port); static void kobil_close(struct usb_serial_port *port); static int kobil_write(struct tty_struct *tty, struct usb_serial_port *port, @@ -89,8 +89,8 @@ static struct usb_serial_driver kobil_device = { .description = "KOBIL USB smart card terminal", .id_table = id_table, .num_ports = 1, - .attach = kobil_startup, - .release = kobil_release, + .port_probe = kobil_port_probe, + .port_remove = kobil_port_remove, .ioctl = kobil_ioctl, .set_termios = kobil_set_termios, .init_termios = kobil_init_termios, @@ -117,9 +117,10 @@ struct kobil_private { }; -static int kobil_startup(struct usb_serial *serial) +static int kobil_port_probe(struct usb_serial_port *port) { int i; + struct usb_serial *serial = port->serial; struct kobil_private *priv; struct usb_device *pdev; struct usb_host_config *actconfig; @@ -149,7 +150,7 @@ static int kobil_startup(struct usb_serial *serial) dev_dbg(&serial->dev->dev, "KOBIL KAAN SIM detected\n"); break; } - usb_set_serial_port_data(serial->port[0], priv); + usb_set_serial_port_data(port, priv); /* search for the necessary endpoints */ pdev = serial->dev; @@ -179,12 +180,14 @@ static int kobil_startup(struct usb_serial *serial) } -static void kobil_release(struct usb_serial *serial) +static int kobil_port_remove(struct usb_serial_port *port) { - int i; + struct kobil_private *priv; - for (i = 0; i < serial->num_ports; ++i) - kfree(usb_get_serial_port_data(serial->port[i])); + priv = usb_get_serial_port_data(port); + kfree(priv); + + return 0; } static void kobil_init_termios(struct tty_struct *tty) -- cgit v1.2.3 From c27f3efc56080a246f6ab7f57f0a6f56d256d769 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Wed, 17 Oct 2012 13:34:57 +0200 Subject: USB: io_edgeport: fix port-data memory leak Fix port-data memory leak by moving port data allocation and deallocation to port_probe and port_remove. Since commit 0998d0631001288 (device-core: Ensure drvdata = NULL when no driver is bound) the port private data is no longer freed at release as it is no longer accessible. Compile-only tested. Cc: Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/io_edgeport.c | 54 +++++++++++++++++++++------------------- drivers/usb/serial/io_tables.h | 8 ++++++ 2 files changed, 37 insertions(+), 25 deletions(-) diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c index 8e6faaf3580c..5acc0d13864a 100644 --- a/drivers/usb/serial/io_edgeport.c +++ b/drivers/usb/serial/io_edgeport.c @@ -225,6 +225,8 @@ static int edge_get_icount(struct tty_struct *tty, static int edge_startup(struct usb_serial *serial); static void edge_disconnect(struct usb_serial *serial); static void edge_release(struct usb_serial *serial); +static int edge_port_probe(struct usb_serial_port *port); +static int edge_port_remove(struct usb_serial_port *port); #include "io_tables.h" /* all of the devices that this driver supports */ @@ -2875,10 +2877,9 @@ static void load_application_firmware(struct edgeport_serial *edge_serial) static int edge_startup(struct usb_serial *serial) { struct edgeport_serial *edge_serial; - struct edgeport_port *edge_port; struct usb_device *dev; struct device *ddev = &serial->dev->dev; - int i, j; + int i; int response; bool interrupt_in_found; bool bulk_in_found; @@ -2961,25 +2962,6 @@ static int edge_startup(struct usb_serial *serial) /* we set up the pointers to the endpoints in the edge_open function, * as the structures aren't created yet. */ - /* set up our port private structures */ - for (i = 0; i < serial->num_ports; ++i) { - edge_port = kzalloc(sizeof(struct edgeport_port), GFP_KERNEL); - if (edge_port == NULL) { - dev_err(ddev, "%s - Out of memory\n", __func__); - for (j = 0; j < i; ++j) { - kfree(usb_get_serial_port_data(serial->port[j])); - usb_set_serial_port_data(serial->port[j], - NULL); - } - usb_set_serial_data(serial, NULL); - kfree(edge_serial); - return -ENOMEM; - } - spin_lock_init(&edge_port->ep_lock); - edge_port->port = serial->port[i]; - usb_set_serial_port_data(serial->port[i], edge_port); - } - response = 0; if (edge_serial->is_epic) { @@ -3120,14 +3102,36 @@ static void edge_disconnect(struct usb_serial *serial) static void edge_release(struct usb_serial *serial) { struct edgeport_serial *edge_serial = usb_get_serial_data(serial); - int i; - - for (i = 0; i < serial->num_ports; ++i) - kfree(usb_get_serial_port_data(serial->port[i])); kfree(edge_serial); } +static int edge_port_probe(struct usb_serial_port *port) +{ + struct edgeport_port *edge_port; + + edge_port = kzalloc(sizeof(*edge_port), GFP_KERNEL); + if (!edge_port) + return -ENOMEM; + + spin_lock_init(&edge_port->ep_lock); + edge_port->port = port; + + usb_set_serial_port_data(port, edge_port); + + return 0; +} + +static int edge_port_remove(struct usb_serial_port *port) +{ + struct edgeport_port *edge_port; + + edge_port = usb_get_serial_port_data(port); + kfree(edge_port); + + return 0; +} + module_usb_serial_driver(serial_drivers, id_table_combined); MODULE_AUTHOR(DRIVER_AUTHOR); diff --git a/drivers/usb/serial/io_tables.h b/drivers/usb/serial/io_tables.h index 350afddb55ba..1511dd0ad324 100644 --- a/drivers/usb/serial/io_tables.h +++ b/drivers/usb/serial/io_tables.h @@ -110,6 +110,8 @@ static struct usb_serial_driver edgeport_2port_device = { .attach = edge_startup, .disconnect = edge_disconnect, .release = edge_release, + .port_probe = edge_port_probe, + .port_remove = edge_port_remove, .ioctl = edge_ioctl, .set_termios = edge_set_termios, .tiocmget = edge_tiocmget, @@ -139,6 +141,8 @@ static struct usb_serial_driver edgeport_4port_device = { .attach = edge_startup, .disconnect = edge_disconnect, .release = edge_release, + .port_probe = edge_port_probe, + .port_remove = edge_port_remove, .ioctl = edge_ioctl, .set_termios = edge_set_termios, .tiocmget = edge_tiocmget, @@ -168,6 +172,8 @@ static struct usb_serial_driver edgeport_8port_device = { .attach = edge_startup, .disconnect = edge_disconnect, .release = edge_release, + .port_probe = edge_port_probe, + .port_remove = edge_port_remove, .ioctl = edge_ioctl, .set_termios = edge_set_termios, .tiocmget = edge_tiocmget, @@ -197,6 +203,8 @@ static struct usb_serial_driver epic_device = { .attach = edge_startup, .disconnect = edge_disconnect, .release = edge_release, + .port_probe = edge_port_probe, + .port_remove = edge_port_remove, .ioctl = edge_ioctl, .set_termios = edge_set_termios, .tiocmget = edge_tiocmget, -- cgit v1.2.3 From 3124d1d71d3df59d40b913b5481df58099e811d1 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Wed, 17 Oct 2012 13:34:56 +0200 Subject: USB: f81232: fix port-data memory leak Fix port-data memory leak by replacing attach and release with port_probe and port_remove. Since commit 0998d0631001288 (device-core: Ensure drvdata = NULL when no driver is bound) the port private data is no longer freed at release as it is no longer accessible. Compile-only tested. Cc: Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/f81232.c | 43 +++++++++++++++++-------------------------- 1 file changed, 17 insertions(+), 26 deletions(-) diff --git a/drivers/usb/serial/f81232.c b/drivers/usb/serial/f81232.c index 244477107e2f..6e4eb57d0177 100644 --- a/drivers/usb/serial/f81232.c +++ b/drivers/usb/serial/f81232.c @@ -318,39 +318,30 @@ static int f81232_ioctl(struct tty_struct *tty, return -ENOIOCTLCMD; } -static int f81232_startup(struct usb_serial *serial) +static int f81232_port_probe(struct usb_serial_port *port) { struct f81232_private *priv; - int i; - for (i = 0; i < serial->num_ports; ++i) { - priv = kzalloc(sizeof(struct f81232_private), GFP_KERNEL); - if (!priv) - goto cleanup; - spin_lock_init(&priv->lock); - init_waitqueue_head(&priv->delta_msr_wait); - usb_set_serial_port_data(serial->port[i], priv); - } - return 0; + priv = kzalloc(sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; -cleanup: - for (--i; i >= 0; --i) { - priv = usb_get_serial_port_data(serial->port[i]); - kfree(priv); - usb_set_serial_port_data(serial->port[i], NULL); - } - return -ENOMEM; + spin_lock_init(&priv->lock); + init_waitqueue_head(&priv->delta_msr_wait); + + usb_set_serial_port_data(port, priv); + + return 0; } -static void f81232_release(struct usb_serial *serial) +static int f81232_port_remove(struct usb_serial_port *port) { - int i; struct f81232_private *priv; - for (i = 0; i < serial->num_ports; ++i) { - priv = usb_get_serial_port_data(serial->port[i]); - kfree(priv); - } + priv = usb_get_serial_port_data(port); + kfree(priv); + + return 0; } static struct usb_serial_driver f81232_device = { @@ -373,8 +364,8 @@ static struct usb_serial_driver f81232_device = { .tiocmset = f81232_tiocmset, .process_read_urb = f81232_process_read_urb, .read_int_callback = f81232_read_int_callback, - .attach = f81232_startup, - .release = f81232_release, + .port_probe = f81232_port_probe, + .port_remove = f81232_port_remove, }; static struct usb_serial_driver * const serial_drivers[] = { -- cgit v1.2.3 From 94ab71ce288921490ca857e25ad174e1921b1e29 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Wed, 17 Oct 2012 13:35:00 +0200 Subject: USB: keyspan_pda: fix port-data memory leak Fix port-data memory leak by replacing attach and release with port_probe and port_remove. Since commit 0998d0631001288 (device-core: Ensure drvdata = NULL when no driver is bound) the port private data is no longer freed at release as it is no longer accessible. Note that the write waitqueue was initialised but never used. Compile-only tested. Cc: Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/keyspan_pda.c | 30 +++++++++++++++++------------- 1 file changed, 17 insertions(+), 13 deletions(-) diff --git a/drivers/usb/serial/keyspan_pda.c b/drivers/usb/serial/keyspan_pda.c index ca43ecb4a2bd..bb87e29c4ac2 100644 --- a/drivers/usb/serial/keyspan_pda.c +++ b/drivers/usb/serial/keyspan_pda.c @@ -713,29 +713,33 @@ MODULE_FIRMWARE("keyspan_pda/keyspan_pda.fw"); MODULE_FIRMWARE("keyspan_pda/xircom_pgs.fw"); #endif -static int keyspan_pda_startup(struct usb_serial *serial) +static int keyspan_pda_port_probe(struct usb_serial_port *port) { struct keyspan_pda_private *priv; - /* allocate the private data structures for all ports. Well, for all - one ports. */ - priv = kmalloc(sizeof(struct keyspan_pda_private), GFP_KERNEL); if (!priv) - return 1; /* error */ - usb_set_serial_port_data(serial->port[0], priv); - init_waitqueue_head(&serial->port[0]->write_wait); + return -ENOMEM; + INIT_WORK(&priv->wakeup_work, keyspan_pda_wakeup_write); INIT_WORK(&priv->unthrottle_work, keyspan_pda_request_unthrottle); - priv->serial = serial; - priv->port = serial->port[0]; + priv->serial = port->serial; + priv->port = port; + + usb_set_serial_port_data(port, priv); + return 0; } -static void keyspan_pda_release(struct usb_serial *serial) +static int keyspan_pda_port_remove(struct usb_serial_port *port) { - kfree(usb_get_serial_port_data(serial->port[0])); + struct keyspan_pda_private *priv; + + priv = usb_get_serial_port_data(port); + kfree(priv); + + return 0; } #ifdef KEYSPAN @@ -786,8 +790,8 @@ static struct usb_serial_driver keyspan_pda_device = { .break_ctl = keyspan_pda_break_ctl, .tiocmget = keyspan_pda_tiocmget, .tiocmset = keyspan_pda_tiocmset, - .attach = keyspan_pda_startup, - .release = keyspan_pda_release, + .port_probe = keyspan_pda_port_probe, + .port_remove = keyspan_pda_port_remove, }; static struct usb_serial_driver * const serial_drivers[] = { -- cgit v1.2.3 From 003615302a16579531932576bcd9582ddeba9018 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Wed, 17 Oct 2012 13:34:58 +0200 Subject: USB: io_ti: fix port-data memory leak Fix port-data memory leak by moving port data allocation and deallocation to port_probe and port_remove. Since commit 0998d0631001288 (device-core: Ensure drvdata = NULL when no driver is bound) the port private data is no longer freed at release as it is no longer accessible. Compile-only tested. Cc: Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/io_ti.c | 91 +++++++++++++++++++++++----------------------- 1 file changed, 45 insertions(+), 46 deletions(-) diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c index a2209cd45093..9ae65d679f02 100644 --- a/drivers/usb/serial/io_ti.c +++ b/drivers/usb/serial/io_ti.c @@ -2532,12 +2532,7 @@ static void edge_break(struct tty_struct *tty, int break_state) static int edge_startup(struct usb_serial *serial) { struct edgeport_serial *edge_serial; - struct edgeport_port *edge_port; - struct usb_device *dev; int status; - int i; - - dev = serial->dev; /* create our private serial structure */ edge_serial = kzalloc(sizeof(struct edgeport_serial), GFP_KERNEL); @@ -2555,40 +2550,7 @@ static int edge_startup(struct usb_serial *serial) return status; } - /* set up our port private structures */ - for (i = 0; i < serial->num_ports; ++i) { - edge_port = kzalloc(sizeof(struct edgeport_port), GFP_KERNEL); - if (edge_port == NULL) { - dev_err(&serial->dev->dev, "%s - Out of memory\n", - __func__); - goto cleanup; - } - spin_lock_init(&edge_port->ep_lock); - if (kfifo_alloc(&edge_port->write_fifo, EDGE_OUT_BUF_SIZE, - GFP_KERNEL)) { - dev_err(&serial->dev->dev, "%s - Out of memory\n", - __func__); - kfree(edge_port); - goto cleanup; - } - edge_port->port = serial->port[i]; - edge_port->edge_serial = edge_serial; - usb_set_serial_port_data(serial->port[i], edge_port); - edge_port->bUartMode = default_uart_mode; - } - return 0; - -cleanup: - for (--i; i >= 0; --i) { - edge_port = usb_get_serial_port_data(serial->port[i]); - kfifo_free(&edge_port->write_fifo); - kfree(edge_port); - usb_set_serial_port_data(serial->port[i], NULL); - } - kfree(edge_serial); - usb_set_serial_data(serial, NULL); - return -ENOMEM; } static void edge_disconnect(struct usb_serial *serial) @@ -2597,17 +2559,54 @@ static void edge_disconnect(struct usb_serial *serial) static void edge_release(struct usb_serial *serial) { - int i; + kfree(usb_get_serial_data(serial)); +} + +static int edge_port_probe(struct usb_serial_port *port) +{ struct edgeport_port *edge_port; + int ret; - for (i = 0; i < serial->num_ports; ++i) { - edge_port = usb_get_serial_port_data(serial->port[i]); + edge_port = kzalloc(sizeof(*edge_port), GFP_KERNEL); + if (!edge_port) + return -ENOMEM; + + ret = kfifo_alloc(&edge_port->write_fifo, EDGE_OUT_BUF_SIZE, + GFP_KERNEL); + if (ret) { + kfree(edge_port); + return -ENOMEM; + } + + ret = edge_create_sysfs_attrs(port); + if (ret) { kfifo_free(&edge_port->write_fifo); kfree(edge_port); + return ret; } - kfree(usb_get_serial_data(serial)); + + spin_lock_init(&edge_port->ep_lock); + edge_port->port = port; + edge_port->edge_serial = usb_get_serial_data(port->serial); + edge_port->bUartMode = default_uart_mode; + + usb_set_serial_port_data(port, edge_port); + + return 0; } +static int edge_port_remove(struct usb_serial_port *port) +{ + struct edgeport_port *edge_port; + + edge_port = usb_get_serial_port_data(port); + + edge_remove_sysfs_attrs(port); + kfifo_free(&edge_port->write_fifo); + kfree(edge_port); + + return 0; +} /* Sysfs Attributes */ @@ -2667,8 +2666,8 @@ static struct usb_serial_driver edgeport_1port_device = { .attach = edge_startup, .disconnect = edge_disconnect, .release = edge_release, - .port_probe = edge_create_sysfs_attrs, - .port_remove = edge_remove_sysfs_attrs, + .port_probe = edge_port_probe, + .port_remove = edge_port_remove, .ioctl = edge_ioctl, .set_termios = edge_set_termios, .tiocmget = edge_tiocmget, @@ -2698,8 +2697,8 @@ static struct usb_serial_driver edgeport_2port_device = { .attach = edge_startup, .disconnect = edge_disconnect, .release = edge_release, - .port_probe = edge_create_sysfs_attrs, - .port_remove = edge_remove_sysfs_attrs, + .port_probe = edge_port_probe, + .port_remove = edge_port_remove, .ioctl = edge_ioctl, .set_termios = edge_set_termios, .tiocmget = edge_tiocmget, -- cgit v1.2.3 From 99a6f73c495c420df826e5b267fb073fd6766fc3 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Wed, 17 Oct 2012 13:35:01 +0200 Subject: USB: kl5kusb105: fix port-data memory leak Fix port-data memory leak by replacing attach and release with port_probe and port_remove. Since commit 0998d0631001288 (device-core: Ensure drvdata = NULL when no driver is bound) the port private data is no longer freed at release as it is no longer accessible. Note that the write waitqueue was initialised but never used. Compile-only tested. Cc: Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/kl5kusb105.c | 68 +++++++++++++++-------------------------- 1 file changed, 24 insertions(+), 44 deletions(-) diff --git a/drivers/usb/serial/kl5kusb105.c b/drivers/usb/serial/kl5kusb105.c index 3f6d7376c02d..1f4517864cd2 100644 --- a/drivers/usb/serial/kl5kusb105.c +++ b/drivers/usb/serial/kl5kusb105.c @@ -60,8 +60,8 @@ /* * Function prototypes */ -static int klsi_105_startup(struct usb_serial *serial); -static void klsi_105_release(struct usb_serial *serial); +static int klsi_105_port_probe(struct usb_serial_port *port); +static int klsi_105_port_remove(struct usb_serial_port *port); static int klsi_105_open(struct tty_struct *tty, struct usb_serial_port *port); static void klsi_105_close(struct usb_serial_port *port); static void klsi_105_set_termios(struct tty_struct *tty, @@ -99,8 +99,8 @@ static struct usb_serial_driver kl5kusb105d_device = { /*.break_ctl = klsi_105_break_ctl,*/ .tiocmget = klsi_105_tiocmget, .tiocmset = klsi_105_tiocmset, - .attach = klsi_105_startup, - .release = klsi_105_release, + .port_probe = klsi_105_port_probe, + .port_remove = klsi_105_port_remove, .throttle = usb_serial_generic_throttle, .unthrottle = usb_serial_generic_unthrottle, .process_read_urb = klsi_105_process_read_urb, @@ -223,60 +223,40 @@ static int klsi_105_get_line_state(struct usb_serial_port *port, * Driver's tty interface functions */ -static int klsi_105_startup(struct usb_serial *serial) +static int klsi_105_port_probe(struct usb_serial_port *port) { struct klsi_105_private *priv; - int i; - /* check if we support the product id (see keyspan.c) - * FIXME - */ + priv = kmalloc(sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; - /* allocate the private data structure */ - for (i = 0; i < serial->num_ports; i++) { - priv = kmalloc(sizeof(struct klsi_105_private), - GFP_KERNEL); - if (!priv) { - dev_dbg(&serial->interface->dev, - "%s - kmalloc for klsi_105_private failed.\n", - __func__); - i--; - goto err_cleanup; - } - /* set initial values for control structures */ - priv->cfg.pktlen = 5; - priv->cfg.baudrate = kl5kusb105a_sio_b9600; - priv->cfg.databits = kl5kusb105a_dtb_8; - priv->cfg.unknown1 = 0; - priv->cfg.unknown2 = 1; + /* set initial values for control structures */ + priv->cfg.pktlen = 5; + priv->cfg.baudrate = kl5kusb105a_sio_b9600; + priv->cfg.databits = kl5kusb105a_dtb_8; + priv->cfg.unknown1 = 0; + priv->cfg.unknown2 = 1; - priv->line_state = 0; + priv->line_state = 0; - usb_set_serial_port_data(serial->port[i], priv); + spin_lock_init(&priv->lock); - spin_lock_init(&priv->lock); + /* priv->termios is left uninitialized until port opening */ - /* priv->termios is left uninitialized until port opening */ - init_waitqueue_head(&serial->port[i]->write_wait); - } + usb_set_serial_port_data(port, priv); return 0; - -err_cleanup: - for (; i >= 0; i--) { - priv = usb_get_serial_port_data(serial->port[i]); - kfree(priv); - usb_set_serial_port_data(serial->port[i], NULL); - } - return -ENOMEM; } -static void klsi_105_release(struct usb_serial *serial) +static int klsi_105_port_remove(struct usb_serial_port *port) { - int i; + struct klsi_105_private *priv; + + priv = usb_get_serial_port_data(port); + kfree(priv); - for (i = 0; i < serial->num_ports; ++i) - kfree(usb_get_serial_port_data(serial->port[i])); + return 0; } static int klsi_105_open(struct tty_struct *tty, struct usb_serial_port *port) -- cgit v1.2.3 From 53636555b9190f88320d9d46cf142f8797895456 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Wed, 17 Oct 2012 13:34:59 +0200 Subject: USB: iuu_phoenix: fix port-data memory leak Fix port-data memory leak by replacing attach and release with port_probe and port_remove. Since commit 0998d0631001288 (device-core: Ensure drvdata = NULL when no driver is bound) the port private data is no longer freed at release as it is no longer accessible. Compile-only tested. Cc: Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/iuu_phoenix.c | 62 ++++++++++++++-------------------------- 1 file changed, 22 insertions(+), 40 deletions(-) diff --git a/drivers/usb/serial/iuu_phoenix.c b/drivers/usb/serial/iuu_phoenix.c index 01da3ea36e89..959f71e31dca 100644 --- a/drivers/usb/serial/iuu_phoenix.c +++ b/drivers/usb/serial/iuu_phoenix.c @@ -72,63 +72,45 @@ struct iuu_private { u32 clk; }; - -static void iuu_free_buf(struct iuu_private *priv) -{ - kfree(priv->buf); - kfree(priv->writebuf); -} - -static int iuu_alloc_buf(struct usb_serial *serial, struct iuu_private *priv) -{ - priv->buf = kzalloc(256, GFP_KERNEL); - priv->writebuf = kzalloc(256, GFP_KERNEL); - if (!priv->buf || !priv->writebuf) { - iuu_free_buf(priv); - dev_dbg(&serial->dev->dev, "%s problem allocation buffer\n", __func__); - return -ENOMEM; - } - dev_dbg(&serial->dev->dev, "%s - Privates buffers allocation success\n", __func__); - return 0; -} - -static int iuu_startup(struct usb_serial *serial) +static int iuu_port_probe(struct usb_serial_port *port) { struct iuu_private *priv; priv = kzalloc(sizeof(struct iuu_private), GFP_KERNEL); - dev_dbg(&serial->dev->dev, "%s- priv allocation success\n", __func__); if (!priv) return -ENOMEM; - if (iuu_alloc_buf(serial, priv)) { + + priv->buf = kzalloc(256, GFP_KERNEL); + if (!priv->buf) { kfree(priv); return -ENOMEM; } + + priv->writebuf = kzalloc(256, GFP_KERNEL); + if (!priv->writebuf) { + kfree(priv->buf); + kfree(priv); + return -ENOMEM; + } + priv->vcc = vcc_default; spin_lock_init(&priv->lock); init_waitqueue_head(&priv->delta_msr_wait); - usb_set_serial_port_data(serial->port[0], priv); + + usb_set_serial_port_data(port, priv); + return 0; } -/* Release function */ -static void iuu_release(struct usb_serial *serial) +static int iuu_port_remove(struct usb_serial_port *port) { - struct usb_serial_port *port = serial->port[0]; struct iuu_private *priv = usb_get_serial_port_data(port); - if (!port) - return; - - if (priv) { - iuu_free_buf(priv); - dev_dbg(&port->dev, "%s - I will free all\n", __func__); - usb_set_serial_port_data(port, NULL); - dev_dbg(&port->dev, "%s - priv is not anymore in port structure\n", __func__); - kfree(priv); + kfree(priv->writebuf); + kfree(priv->buf); + kfree(priv); - dev_dbg(&port->dev, "%s priv is now kfree\n", __func__); - } + return 0; } static int iuu_tiocmset(struct tty_struct *tty, @@ -1225,8 +1207,8 @@ static struct usb_serial_driver iuu_device = { .tiocmset = iuu_tiocmset, .set_termios = iuu_set_termios, .init_termios = iuu_init_termios, - .attach = iuu_startup, - .release = iuu_release, + .port_probe = iuu_port_probe, + .port_remove = iuu_port_remove, }; static struct usb_serial_driver * const serial_drivers[] = { -- cgit v1.2.3 From 289b076f89c2c3260e914dad18ae12f193ea86d5 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Wed, 17 Oct 2012 16:31:32 +0200 Subject: USB: oti6858: fix port-data memory leak Fix port-data memory leak by replacing attach and release with port_probe and port_remove. Since commit 0998d0631001288 (device-core: Ensure drvdata = NULL when no driver is bound) the port private data is no longer freed at release as it is no longer accessible. Compile-only tested. Cc: Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/oti6858.c | 68 ++++++++++++++++++-------------------------- 1 file changed, 28 insertions(+), 40 deletions(-) diff --git a/drivers/usb/serial/oti6858.c b/drivers/usb/serial/oti6858.c index 933241f03fd8..cee9a52ca891 100644 --- a/drivers/usb/serial/oti6858.c +++ b/drivers/usb/serial/oti6858.c @@ -137,8 +137,8 @@ static int oti6858_chars_in_buffer(struct tty_struct *tty); static int oti6858_tiocmget(struct tty_struct *tty); static int oti6858_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear); -static int oti6858_startup(struct usb_serial *serial); -static void oti6858_release(struct usb_serial *serial); +static int oti6858_port_probe(struct usb_serial_port *port); +static int oti6858_port_remove(struct usb_serial_port *port); /* device info */ static struct usb_serial_driver oti6858_device = { @@ -161,8 +161,8 @@ static struct usb_serial_driver oti6858_device = { .write_bulk_callback = oti6858_write_bulk_callback, .write_room = oti6858_write_room, .chars_in_buffer = oti6858_chars_in_buffer, - .attach = oti6858_startup, - .release = oti6858_release, + .port_probe = oti6858_port_probe, + .port_remove = oti6858_port_remove, }; static struct usb_serial_driver * const serial_drivers[] = { @@ -331,36 +331,33 @@ static void send_data(struct work_struct *work) usb_serial_port_softint(port); } -static int oti6858_startup(struct usb_serial *serial) +static int oti6858_port_probe(struct usb_serial_port *port) { - struct usb_serial_port *port = serial->port[0]; struct oti6858_private *priv; - int i; - - for (i = 0; i < serial->num_ports; ++i) { - priv = kzalloc(sizeof(struct oti6858_private), GFP_KERNEL); - if (!priv) - break; - - spin_lock_init(&priv->lock); - init_waitqueue_head(&priv->intr_wait); -/* INIT_WORK(&priv->setup_work, setup_line, serial->port[i]); */ -/* INIT_WORK(&priv->write_work, send_data, serial->port[i]); */ - priv->port = port; - INIT_DELAYED_WORK(&priv->delayed_setup_work, setup_line); - INIT_DELAYED_WORK(&priv->delayed_write_work, send_data); - - usb_set_serial_port_data(serial->port[i], priv); - } - if (i == serial->num_ports) - return 0; - for (--i; i >= 0; --i) { - priv = usb_get_serial_port_data(serial->port[i]); - kfree(priv); - usb_set_serial_port_data(serial->port[i], NULL); - } - return -ENOMEM; + priv = kzalloc(sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + spin_lock_init(&priv->lock); + init_waitqueue_head(&priv->intr_wait); + priv->port = port; + INIT_DELAYED_WORK(&priv->delayed_setup_work, setup_line); + INIT_DELAYED_WORK(&priv->delayed_write_work, send_data); + + usb_set_serial_port_data(port, priv); + + return 0; +} + +static int oti6858_port_remove(struct usb_serial_port *port) +{ + struct oti6858_private *priv; + + priv = usb_get_serial_port_data(port); + kfree(priv); + + return 0; } static int oti6858_write(struct tty_struct *tty, struct usb_serial_port *port, @@ -709,15 +706,6 @@ static int oti6858_ioctl(struct tty_struct *tty, return -ENOIOCTLCMD; } - -static void oti6858_release(struct usb_serial *serial) -{ - int i; - - for (i = 0; i < serial->num_ports; ++i) - kfree(usb_get_serial_port_data(serial->port[i])); -} - static void oti6858_read_int_callback(struct urb *urb) { struct usb_serial_port *port = urb->context; -- cgit v1.2.3 From 51ef847df74632e7cfdf952afc3887de105b8b35 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Wed, 17 Oct 2012 16:31:35 +0200 Subject: USB: ti_usb_3410_5052: fix port-data memory leak Fix port-data memory leak by moving port data allocation and deallocation to port_probe and port_remove. Since commit 0998d0631001288 (device-core: Ensure drvdata = NULL when no driver is bound) the port private data is no longer freed at release as it is no longer accessible. Compile-only tested. Cc: Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/ti_usb_3410_5052.c | 88 +++++++++++++++++------------------ 1 file changed, 43 insertions(+), 45 deletions(-) diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c index 6f49392cda5b..f2530d2ef3c4 100644 --- a/drivers/usb/serial/ti_usb_3410_5052.c +++ b/drivers/usb/serial/ti_usb_3410_5052.c @@ -97,6 +97,8 @@ struct ti_device { static int ti_startup(struct usb_serial *serial); static void ti_release(struct usb_serial *serial); +static int ti_port_probe(struct usb_serial_port *port); +static int ti_port_remove(struct usb_serial_port *port); static int ti_open(struct tty_struct *tty, struct usb_serial_port *port); static void ti_close(struct usb_serial_port *port); static int ti_write(struct tty_struct *tty, struct usb_serial_port *port, @@ -221,6 +223,8 @@ static struct usb_serial_driver ti_1port_device = { .num_ports = 1, .attach = ti_startup, .release = ti_release, + .port_probe = ti_port_probe, + .port_remove = ti_port_remove, .open = ti_open, .close = ti_close, .write = ti_write, @@ -249,6 +253,8 @@ static struct usb_serial_driver ti_2port_device = { .num_ports = 2, .attach = ti_startup, .release = ti_release, + .port_probe = ti_port_probe, + .port_remove = ti_port_remove, .open = ti_open, .close = ti_close, .write = ti_write, @@ -347,11 +353,8 @@ module_exit(ti_exit); static int ti_startup(struct usb_serial *serial) { struct ti_device *tdev; - struct ti_port *tport; struct usb_device *dev = serial->dev; int status; - int i; - dev_dbg(&dev->dev, "%s - product 0x%4X, num configurations %d, configuration value %d", @@ -399,42 +402,8 @@ static int ti_startup(struct usb_serial *serial) goto free_tdev; } - /* set up port structures */ - for (i = 0; i < serial->num_ports; ++i) { - tport = kzalloc(sizeof(struct ti_port), GFP_KERNEL); - if (tport == NULL) { - dev_err(&dev->dev, "%s - out of memory\n", __func__); - status = -ENOMEM; - goto free_tports; - } - spin_lock_init(&tport->tp_lock); - tport->tp_uart_base_addr = (i == 0 ? - TI_UART1_BASE_ADDR : TI_UART2_BASE_ADDR); - tport->tp_closing_wait = closing_wait; - init_waitqueue_head(&tport->tp_msr_wait); - init_waitqueue_head(&tport->tp_write_wait); - if (kfifo_alloc(&tport->write_fifo, TI_WRITE_BUF_SIZE, - GFP_KERNEL)) { - dev_err(&dev->dev, "%s - out of memory\n", __func__); - kfree(tport); - status = -ENOMEM; - goto free_tports; - } - tport->tp_port = serial->port[i]; - tport->tp_tdev = tdev; - usb_set_serial_port_data(serial->port[i], tport); - tport->tp_uart_mode = 0; /* default is RS232 */ - } - return 0; -free_tports: - for (--i; i >= 0; --i) { - tport = usb_get_serial_port_data(serial->port[i]); - kfifo_free(&tport->write_fifo); - kfree(tport); - usb_set_serial_port_data(serial->port[i], NULL); - } free_tdev: kfree(tdev); usb_set_serial_data(serial, NULL); @@ -444,21 +413,50 @@ free_tdev: static void ti_release(struct usb_serial *serial) { - int i; struct ti_device *tdev = usb_get_serial_data(serial); + + kfree(tdev); +} + +static int ti_port_probe(struct usb_serial_port *port) +{ struct ti_port *tport; - for (i = 0; i < serial->num_ports; ++i) { - tport = usb_get_serial_port_data(serial->port[i]); - if (tport) { - kfifo_free(&tport->write_fifo); - kfree(tport); - } + tport = kzalloc(sizeof(*tport), GFP_KERNEL); + if (!tport) + return -ENOMEM; + + spin_lock_init(&tport->tp_lock); + if (port == port->serial->port[0]) + tport->tp_uart_base_addr = TI_UART1_BASE_ADDR; + else + tport->tp_uart_base_addr = TI_UART2_BASE_ADDR; + tport->tp_closing_wait = closing_wait; + init_waitqueue_head(&tport->tp_msr_wait); + init_waitqueue_head(&tport->tp_write_wait); + if (kfifo_alloc(&tport->write_fifo, TI_WRITE_BUF_SIZE, GFP_KERNEL)) { + kfree(tport); + return -ENOMEM; } + tport->tp_port = port; + tport->tp_tdev = usb_get_serial_data(port->serial); + tport->tp_uart_mode = 0; /* default is RS232 */ - kfree(tdev); + usb_set_serial_port_data(port, tport); + + return 0; } +static int ti_port_remove(struct usb_serial_port *port) +{ + struct ti_port *tport; + + tport = usb_get_serial_port_data(port); + kfifo_free(&tport->write_fifo); + kfree(tport); + + return 0; +} static int ti_open(struct tty_struct *tty, struct usb_serial_port *port) { -- cgit v1.2.3 From 638b9e15233c9570bce65301aa9877235316b9f0 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Wed, 17 Oct 2012 16:31:34 +0200 Subject: USB: ssu100: fix port-data memory leak Fix port-data memory leak by replacing attach and release with port_probe and port_remove. Since commit 0998d0631001288 (device-core: Ensure drvdata = NULL when no driver is bound) the port private data is no longer freed at release as it is no longer accessible. Compile-only tested. Cc: Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/ssu100.c | 34 ++++++++++++++++++++-------------- 1 file changed, 20 insertions(+), 14 deletions(-) diff --git a/drivers/usb/serial/ssu100.c b/drivers/usb/serial/ssu100.c index 015810b3785b..868d1e6852e2 100644 --- a/drivers/usb/serial/ssu100.c +++ b/drivers/usb/serial/ssu100.c @@ -67,13 +67,6 @@ struct ssu100_port_private { struct async_icount icount; }; -static void ssu100_release(struct usb_serial *serial) -{ - struct ssu100_port_private *priv = usb_get_serial_port_data(*serial->port); - - kfree(priv); -} - static inline int ssu100_control_msg(struct usb_device *dev, u8 request, u16 data, u16 index) { @@ -441,22 +434,34 @@ static int ssu100_ioctl(struct tty_struct *tty, } static int ssu100_attach(struct usb_serial *serial) +{ + return ssu100_initdevice(serial->dev); +} + +static int ssu100_port_probe(struct usb_serial_port *port) { struct ssu100_port_private *priv; - struct usb_serial_port *port = *serial->port; priv = kzalloc(sizeof(*priv), GFP_KERNEL); - if (!priv) { - dev_err(&port->dev, "%s- kmalloc(%Zd) failed.\n", __func__, - sizeof(*priv)); + if (!priv) return -ENOMEM; - } spin_lock_init(&priv->status_lock); init_waitqueue_head(&priv->delta_msr_wait); + usb_set_serial_port_data(port, priv); - return ssu100_initdevice(serial->dev); + return 0; +} + +static int ssu100_port_remove(struct usb_serial_port *port) +{ + struct ssu100_port_private *priv; + + priv = usb_get_serial_port_data(port); + kfree(priv); + + return 0; } static int ssu100_tiocmget(struct tty_struct *tty) @@ -647,7 +652,8 @@ static struct usb_serial_driver ssu100_device = { .open = ssu100_open, .close = ssu100_close, .attach = ssu100_attach, - .release = ssu100_release, + .port_probe = ssu100_port_probe, + .port_remove = ssu100_port_remove, .dtr_rts = ssu100_dtr_rts, .process_read_urb = ssu100_process_read_urb, .tiocmget = ssu100_tiocmget, -- cgit v1.2.3 From bf90ff5f3b8f67e5b42df4ea4fd543f8010a2676 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Wed, 17 Oct 2012 16:31:33 +0200 Subject: USB: spcp8x5: fix port-data memory leak Fix port-data memory leak by replacing attach and release with port_probe and port_remove. Since commit 0998d0631001288 (device-core: Ensure drvdata = NULL when no driver is bound) the port private data is no longer freed at release as it is no longer accessible. Compile-only tested. Cc: Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/spcp8x5.c | 46 +++++++++++++++++--------------------------- 1 file changed, 18 insertions(+), 28 deletions(-) diff --git a/drivers/usb/serial/spcp8x5.c b/drivers/usb/serial/spcp8x5.c index 9716efe92955..769c137f8975 100644 --- a/drivers/usb/serial/spcp8x5.c +++ b/drivers/usb/serial/spcp8x5.c @@ -157,13 +157,10 @@ struct spcp8x5_private { u8 line_status; }; -/* desc : when device plug in,this function would be called. - * thanks to usb_serial subsystem,then do almost every things for us. And what - * we should do just alloc the buffer */ -static int spcp8x5_startup(struct usb_serial *serial) +static int spcp8x5_port_probe(struct usb_serial_port *port) { + struct usb_serial *serial = port->serial; struct spcp8x5_private *priv; - int i; enum spcp8x5_type type = SPCP825_007_TYPE; u16 product = le16_to_cpu(serial->dev->descriptor.idProduct); @@ -180,34 +177,27 @@ static int spcp8x5_startup(struct usb_serial *serial) type = SPCP825_PHILIP_TYPE; dev_dbg(&serial->dev->dev, "device type = %d\n", (int)type); - for (i = 0; i < serial->num_ports; ++i) { - priv = kzalloc(sizeof(struct spcp8x5_private), GFP_KERNEL); - if (!priv) - goto cleanup; + priv = kzalloc(sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; - spin_lock_init(&priv->lock); - init_waitqueue_head(&priv->delta_msr_wait); - priv->type = type; - usb_set_serial_port_data(serial->port[i] , priv); - } + spin_lock_init(&priv->lock); + init_waitqueue_head(&priv->delta_msr_wait); + priv->type = type; + + usb_set_serial_port_data(port , priv); return 0; -cleanup: - for (--i; i >= 0; --i) { - priv = usb_get_serial_port_data(serial->port[i]); - kfree(priv); - usb_set_serial_port_data(serial->port[i] , NULL); - } - return -ENOMEM; } -/* call when the device plug out. free all the memory alloced by probe */ -static void spcp8x5_release(struct usb_serial *serial) +static int spcp8x5_port_remove(struct usb_serial_port *port) { - int i; + struct spcp8x5_private *priv; - for (i = 0; i < serial->num_ports; i++) - kfree(usb_get_serial_port_data(serial->port[i])); + priv = usb_get_serial_port_data(port); + kfree(priv); + + return 0; } /* set the modem control line of the device. @@ -649,8 +639,8 @@ static struct usb_serial_driver spcp8x5_device = { .ioctl = spcp8x5_ioctl, .tiocmget = spcp8x5_tiocmget, .tiocmset = spcp8x5_tiocmset, - .attach = spcp8x5_startup, - .release = spcp8x5_release, + .port_probe = spcp8x5_port_probe, + .port_remove = spcp8x5_port_remove, .process_read_urb = spcp8x5_process_read_urb, }; -- cgit v1.2.3 From 0978c9499944d0670338fd048a3bdb1624dc66dc Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Thu, 18 Oct 2012 10:52:17 +0200 Subject: USB: iuu_phoenix: fix sysfs-attribute creation Make sure sysfs attributes are created at port probe. A recent patch ("USB: iuu_phoenix: fix port-data memory leak") removed the sysfs-attribute creation by mistake. Reported-by: Yuanhan Liu Cc: Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/iuu_phoenix.c | 14 ++++++++++++-- 1 file changed, 12 insertions(+), 2 deletions(-) diff --git a/drivers/usb/serial/iuu_phoenix.c b/drivers/usb/serial/iuu_phoenix.c index 959f71e31dca..cd5533e81de7 100644 --- a/drivers/usb/serial/iuu_phoenix.c +++ b/drivers/usb/serial/iuu_phoenix.c @@ -53,6 +53,8 @@ static int iuu_cardout; static bool xmas; static int vcc_default = 5; +static int iuu_create_sysfs_attrs(struct usb_serial_port *port); +static int iuu_remove_sysfs_attrs(struct usb_serial_port *port); static void read_rxcmd_callback(struct urb *urb); struct iuu_private { @@ -75,6 +77,7 @@ struct iuu_private { static int iuu_port_probe(struct usb_serial_port *port) { struct iuu_private *priv; + int ret; priv = kzalloc(sizeof(struct iuu_private), GFP_KERNEL); if (!priv) @@ -99,6 +102,14 @@ static int iuu_port_probe(struct usb_serial_port *port) usb_set_serial_port_data(port, priv); + ret = iuu_create_sysfs_attrs(port); + if (ret) { + kfree(priv->writebuf); + kfree(priv->buf); + kfree(priv); + return ret; + } + return 0; } @@ -106,6 +117,7 @@ static int iuu_port_remove(struct usb_serial_port *port) { struct iuu_private *priv = usb_get_serial_port_data(port); + iuu_remove_sysfs_attrs(port); kfree(priv->writebuf); kfree(priv->buf); kfree(priv); @@ -1197,8 +1209,6 @@ static struct usb_serial_driver iuu_device = { .num_ports = 1, .bulk_in_size = 512, .bulk_out_size = 512, - .port_probe = iuu_create_sysfs_attrs, - .port_remove = iuu_remove_sysfs_attrs, .open = iuu_open, .close = iuu_close, .write = iuu_uart_write, -- cgit v1.2.3 From 5d8c61bc283826827e1f06816c146bfc507d3834 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Thu, 18 Oct 2012 11:43:28 +0200 Subject: USB: io_ti: fix sysfs-attribute creation Make sure port data is initialised before creating sysfs attributes to avoid a race. A recent patch ("USB: io_ti: fix port-data memory leak") got the sysfs-attribute creation and port-data initialisation ordering wrong. Cc: Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/io_ti.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c index 9ae65d679f02..60023c2d2a31 100644 --- a/drivers/usb/serial/io_ti.c +++ b/drivers/usb/serial/io_ti.c @@ -2578,13 +2578,6 @@ static int edge_port_probe(struct usb_serial_port *port) return -ENOMEM; } - ret = edge_create_sysfs_attrs(port); - if (ret) { - kfifo_free(&edge_port->write_fifo); - kfree(edge_port); - return ret; - } - spin_lock_init(&edge_port->ep_lock); edge_port->port = port; edge_port->edge_serial = usb_get_serial_data(port->serial); @@ -2592,6 +2585,13 @@ static int edge_port_probe(struct usb_serial_port *port) usb_set_serial_port_data(port, edge_port); + ret = edge_create_sysfs_attrs(port); + if (ret) { + kfifo_free(&edge_port->write_fifo); + kfree(edge_port); + return ret; + } + return 0; } -- cgit v1.2.3 From 470809741a28c3092279f4e1f3f432e534d46068 Mon Sep 17 00:00:00 2001 From: "Alexis R. Cortes" Date: Wed, 17 Oct 2012 14:09:12 -0500 Subject: usb: host: xhci: New system added for Compliance Mode Patch on SN65LVPE502CP This minor change adds a new system to which the "Fix Compliance Mode on SN65LVPE502CP Hardware" patch has to be applied also. System added: Vendor: Hewlett-Packard. System Model: Z1 Signed-off-by: Alexis R. Cortes Acked-by: Sarah Sharp Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 8d7fcbbe6ade..7d462bf20092 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -479,7 +479,8 @@ static bool compliance_mode_recovery_timer_quirk_check(void) if (strstr(dmi_product_name, "Z420") || strstr(dmi_product_name, "Z620") || - strstr(dmi_product_name, "Z820")) + strstr(dmi_product_name, "Z820") || + strstr(dmi_product_name, "Z1")) return true; return false; -- cgit v1.2.3 From 1452df6f1b7e396d89c2a1fdbdc0e0e839f97671 Mon Sep 17 00:00:00 2001 From: Bjørn Mork Date: Thu, 18 Oct 2012 17:19:53 +0200 Subject: USB: option: blacklist net interface on ZTE devices MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Based on information from the ZTE Windows drivers. Cc: Signed-off-by: Bjørn Mork Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/option.c | 68 ++++++++++++++++++++++++++++++++------------- 1 file changed, 48 insertions(+), 20 deletions(-) diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 30cff03e9f01..7e46894d784e 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -503,11 +503,19 @@ static const struct option_blacklist_info net_intf5_blacklist = { .reserved = BIT(5), }; +static const struct option_blacklist_info net_intf6_blacklist = { + .reserved = BIT(6), +}; + static const struct option_blacklist_info zte_mf626_blacklist = { .sendsetup = BIT(0) | BIT(1), .reserved = BIT(4), }; +static const struct option_blacklist_info zte_1255_blacklist = { + .reserved = BIT(3) | BIT(4), +}; + static const struct usb_device_id option_ids[] = { { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COLT) }, { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA) }, @@ -853,13 +861,19 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0113, 0xff, 0xff, 0xff), .driver_info = (kernel_ulong_t)&net_intf5_blacklist }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0117, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0118, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0121, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0118, 0xff, 0xff, 0xff), + .driver_info = (kernel_ulong_t)&net_intf5_blacklist }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0121, 0xff, 0xff, 0xff), + .driver_info = (kernel_ulong_t)&net_intf5_blacklist }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0122, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0123, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0124, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0125, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0126, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0123, 0xff, 0xff, 0xff), + .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0124, 0xff, 0xff, 0xff), + .driver_info = (kernel_ulong_t)&net_intf5_blacklist }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0125, 0xff, 0xff, 0xff), + .driver_info = (kernel_ulong_t)&net_intf6_blacklist }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0126, 0xff, 0xff, 0xff), + .driver_info = (kernel_ulong_t)&net_intf5_blacklist }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0128, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0142, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0143, 0xff, 0xff, 0xff) }, @@ -872,7 +886,8 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0156, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0157, 0xff, 0xff, 0xff), .driver_info = (kernel_ulong_t)&net_intf5_blacklist }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0158, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0158, 0xff, 0xff, 0xff), + .driver_info = (kernel_ulong_t)&net_intf3_blacklist }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0159, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0161, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0162, 0xff, 0xff, 0xff) }, @@ -886,7 +901,8 @@ static const struct usb_device_id option_ids[] = { .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1010, 0xff, 0xff, 0xff), .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1012, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1012, 0xff, 0xff, 0xff), + .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1057, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1058, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1059, 0xff, 0xff, 0xff) }, @@ -1002,18 +1018,24 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1169, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1170, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1244, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1245, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1245, 0xff, 0xff, 0xff), + .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1246, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1247, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1247, 0xff, 0xff, 0xff), + .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1248, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1249, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1250, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1251, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1252, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1252, 0xff, 0xff, 0xff), + .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1253, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1254, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1255, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1256, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1254, 0xff, 0xff, 0xff), + .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1255, 0xff, 0xff, 0xff), + .driver_info = (kernel_ulong_t)&zte_1255_blacklist }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1256, 0xff, 0xff, 0xff), + .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1257, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1258, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1259, 0xff, 0xff, 0xff) }, @@ -1071,15 +1093,21 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0070, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0073, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0094, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0130, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0133, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0141, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0130, 0xff, 0xff, 0xff), + .driver_info = (kernel_ulong_t)&net_intf1_blacklist }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0133, 0xff, 0xff, 0xff), + .driver_info = (kernel_ulong_t)&net_intf3_blacklist }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0141, 0xff, 0xff, 0xff), + .driver_info = (kernel_ulong_t)&net_intf5_blacklist }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0147, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0152, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0168, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0168, 0xff, 0xff, 0xff), + .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0170, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0176, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0178, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0176, 0xff, 0xff, 0xff), + .driver_info = (kernel_ulong_t)&net_intf3_blacklist }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0178, 0xff, 0xff, 0xff), + .driver_info = (kernel_ulong_t)&net_intf3_blacklist }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_CDMA_TECH, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC8710, 0xff, 0xff, 0xff) }, -- cgit v1.2.3 From 4b35f1c52943851b310afb09047bfe991ac8f5ae Mon Sep 17 00:00:00 2001 From: Bjørn Mork Date: Thu, 18 Oct 2012 17:14:17 +0200 Subject: USB: option: add more ZTE devices MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Cc: Signed-off-by: Bjørn Mork Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/option.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 7e46894d784e..54d4148d01d1 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -895,6 +895,12 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0165, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0167, 0xff, 0xff, 0xff), .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0191, 0xff, 0xff, 0xff), /* ZTE EuFi890 */ + .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0199, 0xff, 0xff, 0xff), /* ZTE MF820S */ + .driver_info = (kernel_ulong_t)&net_intf1_blacklist }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0257, 0xff, 0xff, 0xff), /* ZTE MF821 */ + .driver_info = (kernel_ulong_t)&net_intf3_blacklist }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0326, 0xff, 0xff, 0xff), .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1008, 0xff, 0xff, 0xff), @@ -903,6 +909,8 @@ static const struct usb_device_id option_ids[] = { .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1012, 0xff, 0xff, 0xff), .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1021, 0xff, 0xff, 0xff), + .driver_info = (kernel_ulong_t)&net_intf2_blacklist }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1057, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1058, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1059, 0xff, 0xff, 0xff) }, @@ -1080,8 +1088,16 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1298, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1299, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1300, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1401, 0xff, 0xff, 0xff), + .driver_info = (kernel_ulong_t)&net_intf2_blacklist }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1402, 0xff, 0xff, 0xff), .driver_info = (kernel_ulong_t)&net_intf2_blacklist }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1424, 0xff, 0xff, 0xff), + .driver_info = (kernel_ulong_t)&net_intf2_blacklist }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1425, 0xff, 0xff, 0xff), + .driver_info = (kernel_ulong_t)&net_intf2_blacklist }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1426, 0xff, 0xff, 0xff), /* ZTE MF91 */ + .driver_info = (kernel_ulong_t)&net_intf2_blacklist }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x2002, 0xff, 0xff, 0xff), .driver_info = (kernel_ulong_t)&zte_k3765_z_blacklist }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x2003, 0xff, 0xff, 0xff) }, -- cgit v1.2.3