From 67043d1853d67e3a03038654ab51df3aa8f66ae4 Mon Sep 17 00:00:00 2001 From: Mahoda Ratnayaka Date: Fri, 31 Mar 2017 12:01:00 +1300 Subject: hwmon: (lm87) Allow channel data to be set from dts file Currently there is no method for setting the channel value from the DTS file. When, the driver uses a dts file to initialize the driver platform_data is not set. As a result channel variable may not be set correctly. Without the channel variable set correctly, some of the sensors will not be initialized correctly. For example temp3 sensor sysfs entries. This implements the schema agreed with the device tree binding document. Signed-off-by: Mahoda Ratnayaka Tested-by: Chris Packham Signed-off-by: Chris Packham Signed-off-by: Guenter Roeck --- drivers/hwmon/lm87.c | 23 +++++++++++++++++++++-- 1 file changed, 21 insertions(+), 2 deletions(-) diff --git a/drivers/hwmon/lm87.c b/drivers/hwmon/lm87.c index e06faf9d3f0f..04a7a1ddb030 100644 --- a/drivers/hwmon/lm87.c +++ b/drivers/hwmon/lm87.c @@ -66,6 +66,7 @@ #include #include #include +#include /* * Addresses to scan @@ -855,8 +856,26 @@ static int lm87_init_client(struct i2c_client *client) { struct lm87_data *data = i2c_get_clientdata(client); int rc; - - if (dev_get_platdata(&client->dev)) { + struct device_node *of_node = client->dev.of_node; + u8 val = 0; + struct regulator *vcc = NULL; + + if (of_node) { + if (of_property_read_bool(of_node, "has-temp3")) + val |= CHAN_TEMP3; + if (of_property_read_bool(of_node, "has-in6")) + val |= CHAN_NO_FAN(0); + if (of_property_read_bool(of_node, "has-in7")) + val |= CHAN_NO_FAN(1); + vcc = devm_regulator_get_optional(&client->dev, "vcc"); + if (!IS_ERR(vcc)) { + if (regulator_get_voltage(vcc) == 5000000) + val |= CHAN_VCC_5V; + } + data->channel = val; + lm87_write_value(client, + LM87_REG_CHANNEL_MODE, data->channel); + } else if (dev_get_platdata(&client->dev)) { data->channel = *(u8 *)dev_get_platdata(&client->dev); lm87_write_value(client, LM87_REG_CHANNEL_MODE, data->channel); -- cgit v1.2.3