From b358c6cf029cb67b3ed9cc367fb46f1fa3228c5b Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Tue, 30 Apr 2013 10:44:51 +0300 Subject: fbdev/ps3fb: fix compile warning Commit 11bd5933abe0 ("fbdev/ps3fb: use vm_iomap_memory()") introduced the following warning: drivers/video/ps3fb.c: In function 'ps3fb_mmap': drivers/video/ps3fb.c:712:2: warning: suggest parentheses around '+' inside '<<' [-Wparentheses] Fix this by adding the parentheses. Signed-off-by: Tomi Valkeinen --- drivers/video/ps3fb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/video/ps3fb.c b/drivers/video/ps3fb.c index d9f08c653d62..dbfe2c18a434 100644 --- a/drivers/video/ps3fb.c +++ b/drivers/video/ps3fb.c @@ -710,7 +710,7 @@ static int ps3fb_mmap(struct fb_info *info, struct vm_area_struct *vma) r = vm_iomap_memory(vma, info->fix.smem_start, info->fix.smem_len); dev_dbg(info->device, "ps3fb: mmap framebuffer P(%lx)->V(%lx)\n", - info->fix.smem_start + vma->vm_pgoff << PAGE_SHIFT, + info->fix.smem_start + (vma->vm_pgoff << PAGE_SHIFT), vma->vm_start); return r; -- cgit v1.2.3 From 31d6eebf7e079cfb5e98e65d5af4c6de093e076c Mon Sep 17 00:00:00 2001 From: "Robert P. J. Day" Date: Thu, 2 May 2013 10:19:11 -0400 Subject: regulator: Fix kernel-doc generation warnings. Add a couple kernel-doc lines to get rid of kernel-doc generation warnings, no functional change. Signed-off-by: Robert P. J. Day Signed-off-by: Mark Brown --- drivers/regulator/core.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index 6e5017841582..014c92a5434d 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -1539,7 +1539,10 @@ static void regulator_ena_gpio_free(struct regulator_dev *rdev) } /** - * Balance enable_count of each GPIO and actual GPIO pin control. + * regulator_ena_gpio_ctrl - balance enable_count of each GPIO and actual GPIO pin control + * @rdev: regulator_dev structure + * @enable: enable GPIO at initial use? + * * GPIO is enabled in case of initial use. (enable_count is 0) * GPIO is disabled when it is not shared any more. (enable_count <= 1) */ -- cgit v1.2.3 From 237a1b01fdb29df6a28d50d6dbe7a988c4fb3625 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Wed, 1 May 2013 12:18:43 -0700 Subject: lp8788-charger: Fix kconfig dependency Fix build errors in lp8788-charger by making it depend on IIO. Fixes errors when CONFIG_IIO=m and CHARGER_LP8788=y. lp8788-charger.c:(.text+0x2146b5): undefined reference to `iio_channel_get' lp8788-charger.c:(.text+0x2146ce): undefined reference to `iio_channel_get' lp8788-charger.c:(.text+0x214a86): undefined reference to `iio_read_channel_processed' lp8788-charger.c:(.text+0x214b51): undefined reference to `iio_read_channel_processed' lp8788-charger.c:(.text+0x214c30): undefined reference to `iio_read_channel_processed' lp8788-charger.c:(.text+0x214d93): undefined reference to `iio_channel_release' lp8788-charger.c:(.text+0x214dac): undefined reference to `iio_channel_release' Signed-off-by: Randy Dunlap Acked-by: Milo Kim Signed-off-by: Anton Vorontsov --- drivers/power/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig index 339f802b91c1..814bcb9c942d 100644 --- a/drivers/power/Kconfig +++ b/drivers/power/Kconfig @@ -284,6 +284,7 @@ config CHARGER_LP8788 tristate "TI LP8788 charger driver" depends on MFD_LP8788 depends on LP8788_ADC + depends on IIO help Say Y to enable support for the LP8788 linear charger. -- cgit v1.2.3 From 3d75095a533aa3bbad652369ffde4c129781b8ec Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Wed, 8 May 2013 16:35:10 +0530 Subject: regulator: dbx500: Make local symbol static power_state_active_get is used only in this file. Make it static. While at it also move this function definition inside the CONFIG_REGULATOR_DEBUG macro as it is called only from within it. This also avoids further build warning related to unused definition. Signed-off-by: Sachin Kamat Signed-off-by: Mark Brown --- drivers/regulator/dbx500-prcmu.c | 24 ++++++++++++------------ 1 file changed, 12 insertions(+), 12 deletions(-) diff --git a/drivers/regulator/dbx500-prcmu.c b/drivers/regulator/dbx500-prcmu.c index 89bd2faaef8c..ce89f7848a57 100644 --- a/drivers/regulator/dbx500-prcmu.c +++ b/drivers/regulator/dbx500-prcmu.c @@ -24,18 +24,6 @@ static int power_state_active_cnt; /* will initialize to zero */ static DEFINE_SPINLOCK(power_state_active_lock); -int power_state_active_get(void) -{ - unsigned long flags; - int cnt; - - spin_lock_irqsave(&power_state_active_lock, flags); - cnt = power_state_active_cnt; - spin_unlock_irqrestore(&power_state_active_lock, flags); - - return cnt; -} - void power_state_active_enable(void) { unsigned long flags; @@ -65,6 +53,18 @@ out: #ifdef CONFIG_REGULATOR_DEBUG +static int power_state_active_get(void) +{ + unsigned long flags; + int cnt; + + spin_lock_irqsave(&power_state_active_lock, flags); + cnt = power_state_active_cnt; + spin_unlock_irqrestore(&power_state_active_lock, flags); + + return cnt; +} + static struct ux500_regulator_debug { struct dentry *dir; struct dentry *status_file; -- cgit v1.2.3 From c2b93e0699723700f886ce17bb65ffd771195a6d Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Tue, 7 May 2013 11:28:31 -0400 Subject: cifs: only set ops for inodes in I_NEW state It's generally not safe to reset the inode ops once they've been set. In the case where the inode was originally thought to be a directory and then later found to be a DFS referral, this can lead to an oops when we try to trigger an inode op on it after changing the ops to the blank referral operations. Cc: Reported-and-Tested-by: Sachin Prabhu Signed-off-by: Jeff Layton Signed-off-by: Steve French --- fs/cifs/inode.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/fs/cifs/inode.c b/fs/cifs/inode.c index fc3025199cb3..20efd81266c6 100644 --- a/fs/cifs/inode.c +++ b/fs/cifs/inode.c @@ -171,7 +171,8 @@ cifs_fattr_to_inode(struct inode *inode, struct cifs_fattr *fattr) if (fattr->cf_flags & CIFS_FATTR_DFS_REFERRAL) inode->i_flags |= S_AUTOMOUNT; - cifs_set_ops(inode); + if (inode->i_state & I_NEW) + cifs_set_ops(inode); } void -- cgit v1.2.3 From a2d0dbb4b55681874c5f288538ae55ae69baeaff Mon Sep 17 00:00:00 2001 From: Xiong Zhou Date: Tue, 7 May 2013 10:15:56 +0800 Subject: bq27x00: Fix I2C dependency in KConfig This patch fixes build failure(randconfig) of next-20130501. When config I2C as m, BATTERY_BQ27x00 as y, here comes the failure. The driver depends on I2C only if I2C is not disabled, as Lars commented. Last version of this patch make the driver depend on I2C unconditionally. Failure message: drivers/built-in.o: In function `bq27x00_read_i2c': bq27x00_battery.c:(.text+0x1082a7): undefined reference to `i2c_transfer' drivers/built-in.o: In function `bq27x00_battery_init': bq27x00_battery.c:(.init.text+0x6085): undefined reference to `i2c_register_driver' bq27x00_battery.c:(.init.text+0x60c7): undefined reference to `i2c_del_driver' drivers/built-in.o: In function `bq27x00_battery_exit': bq27x00_battery.c:(.exit.text+0xbf0): undefined reference to `i2c_del_driver' make: *** [vmlinux] Error 1 Signed-off-by: Xiong Zhou Cc: Lars-Peter Clausen Signed-off-by: Anton Vorontsov --- drivers/power/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig index 814bcb9c942d..674e633a5e1b 100644 --- a/drivers/power/Kconfig +++ b/drivers/power/Kconfig @@ -152,6 +152,7 @@ config BATTERY_SBS config BATTERY_BQ27x00 tristate "BQ27x00 battery driver" + depends on I2C || I2C=n help Say Y here to enable support for batteries with BQ27x00 (I2C/HDQ) chips. -- cgit v1.2.3 From c909fc8573af3cff9184551e79cf37784b5ddc24 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Sat, 4 May 2013 13:57:55 +0800 Subject: wm831x_backup: Fix wrong kfree call for devdata->backup.name devdata->backup.name points to devdata->name, the memory for devdata->name is part of struct wm831x_backup. Thus remove kfree call for devdata->backup.name. Signed-off-by: Axel Lin Acked-by: Mark Brown Signed-off-by: Anton Vorontsov --- drivers/power/wm831x_backup.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/power/wm831x_backup.c b/drivers/power/wm831x_backup.c index 58cbb009b74f..56fb509f4be0 100644 --- a/drivers/power/wm831x_backup.c +++ b/drivers/power/wm831x_backup.c @@ -207,7 +207,6 @@ static int wm831x_backup_remove(struct platform_device *pdev) struct wm831x_backup *devdata = platform_get_drvdata(pdev); power_supply_unregister(&devdata->backup); - kfree(devdata->backup.name); return 0; } -- cgit v1.2.3 From dccab6092d3c25bf943d12fb658e63fd88bf8b4a Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Sat, 4 May 2013 18:51:09 +0800 Subject: pm2301_charger: Fix module alias prefix This driver is a i2c driver, use "i2c" rather than "platform" prefix for module alias. Signed-off-by: Axel Lin Signed-off-by: Anton Vorontsov --- drivers/power/pm2301_charger.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/power/pm2301_charger.c b/drivers/power/pm2301_charger.c index f123f3c219c3..e9c6ba0fee7b 100644 --- a/drivers/power/pm2301_charger.c +++ b/drivers/power/pm2301_charger.c @@ -1269,5 +1269,5 @@ module_exit(pm2xxx_charger_exit); MODULE_LICENSE("GPL v2"); MODULE_AUTHOR("Rajkumar kasirajan, Olivier Launay"); -MODULE_ALIAS("platform:pm2xxx-charger"); +MODULE_ALIAS("i2c:pm2xxx-charger"); MODULE_DESCRIPTION("PM2xxx charger management driver"); -- cgit v1.2.3 From 72cd7447e72a13ce72d760b42ec295430f77300a Mon Sep 17 00:00:00 2001 From: Philipp Zabel Date: Wed, 17 Apr 2013 12:05:58 +0200 Subject: ARM i.MX6q: Fix periph_clk2_sel and periph2_clk2_sel clocks The periph_clk2_sel mux can be set to pll3, osc/pll1_ref_clk, or osc/ pll2_burn_in_clk. The periph2_clk2_sel mux can be set to pll3 or pll2. Signed-off-by: Philipp Zabel Signed-off-by: Shawn Guo --- arch/arm/mach-imx/clk-imx6q.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c index 151259003086..ca1717135820 100644 --- a/arch/arm/mach-imx/clk-imx6q.c +++ b/arch/arm/mach-imx/clk-imx6q.c @@ -177,7 +177,8 @@ int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode) static const char *step_sels[] = { "osc", "pll2_pfd2_396m", }; static const char *pll1_sw_sels[] = { "pll1_sys", "step", }; static const char *periph_pre_sels[] = { "pll2_bus", "pll2_pfd2_396m", "pll2_pfd0_352m", "pll2_198m", }; -static const char *periph_clk2_sels[] = { "pll3_usb_otg", "osc", }; +static const char *periph_clk2_sels[] = { "pll3_usb_otg", "osc", "osc", "dummy", }; +static const char *periph2_clk2_sels[] = { "pll3_usb_otg", "pll2_bus", }; static const char *periph_sels[] = { "periph_pre", "periph_clk2", }; static const char *periph2_sels[] = { "periph2_pre", "periph2_clk2", }; static const char *axi_sels[] = { "periph", "pll2_pfd2_396m", "pll3_pfd1_540m", }; @@ -369,8 +370,8 @@ int __init mx6q_clocks_init(void) clk[pll1_sw] = imx_clk_mux("pll1_sw", base + 0xc, 2, 1, pll1_sw_sels, ARRAY_SIZE(pll1_sw_sels)); clk[periph_pre] = imx_clk_mux("periph_pre", base + 0x18, 18, 2, periph_pre_sels, ARRAY_SIZE(periph_pre_sels)); clk[periph2_pre] = imx_clk_mux("periph2_pre", base + 0x18, 21, 2, periph_pre_sels, ARRAY_SIZE(periph_pre_sels)); - clk[periph_clk2_sel] = imx_clk_mux("periph_clk2_sel", base + 0x18, 12, 1, periph_clk2_sels, ARRAY_SIZE(periph_clk2_sels)); - clk[periph2_clk2_sel] = imx_clk_mux("periph2_clk2_sel", base + 0x18, 20, 1, periph_clk2_sels, ARRAY_SIZE(periph_clk2_sels)); + clk[periph_clk2_sel] = imx_clk_mux("periph_clk2_sel", base + 0x18, 12, 2, periph_clk2_sels, ARRAY_SIZE(periph_clk2_sels)); + clk[periph2_clk2_sel] = imx_clk_mux("periph2_clk2_sel", base + 0x18, 20, 1, periph2_clk2_sels, ARRAY_SIZE(periph2_clk2_sels)); clk[axi_sel] = imx_clk_mux("axi_sel", base + 0x14, 6, 2, axi_sels, ARRAY_SIZE(axi_sels)); clk[esai_sel] = imx_clk_mux("esai_sel", base + 0x20, 19, 2, audio_sels, ARRAY_SIZE(audio_sels)); clk[asrc_sel] = imx_clk_mux("asrc_sel", base + 0x30, 7, 2, audio_sels, ARRAY_SIZE(audio_sels)); -- cgit v1.2.3 From 0e574461c4c915a065dd75c894edb653ce99be9c Mon Sep 17 00:00:00 2001 From: Dirk Behme Date: Mon, 22 Apr 2013 08:00:34 +0200 Subject: ARM i.MX6: correct MLB clock configuration According to the i.MX6 Dual/Quad technical reference manual (Figure 18-2. Clock Tree - Part 1) the MLB clock is directly feed by the AXI_CLK_ROOT. This is called 'axi' in our code. Note that the clock of the MLB IP block on the i.MX6 is completely independent of the PLL8 (MLB PLL). The MLB PLL isn't responsible for feeding the MLB IP block with a clock. Instead, it's used internally by the MLB module to sync the bus clock in case the MLB 6-pin interface is enabled: MediaLB Control 0 Register, MLB150_MLBC0[5], MLBPEN: 1 MediaLB 6-pin interface enabled. MLB PLL and MLB PHY is enabled in this case. I.e. the PLL8 MLB PLL has to be handled by the MLB driver and isn't needed for clocking the MLB module itself. Signed-off-by: Dirk Behme CC: Jiada Wang Signed-off-by: Shawn Guo --- arch/arm/mach-imx/clk-imx6q.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c index ca1717135820..f2e1c62cf3ce 100644 --- a/arch/arm/mach-imx/clk-imx6q.c +++ b/arch/arm/mach-imx/clk-imx6q.c @@ -499,7 +499,7 @@ int __init mx6q_clocks_init(void) clk[ldb_di1] = imx_clk_gate2("ldb_di1", "ldb_di1_podf", base + 0x74, 14); clk[ipu2_di1] = imx_clk_gate2("ipu2_di1", "ipu2_di1_sel", base + 0x74, 10); clk[hsi_tx] = imx_clk_gate2("hsi_tx", "hsi_tx_podf", base + 0x74, 16); - clk[mlb] = imx_clk_gate2("mlb", "pll8_mlb", base + 0x74, 18); + clk[mlb] = imx_clk_gate2("mlb", "axi", base + 0x74, 18); clk[mmdc_ch0_axi] = imx_clk_gate2("mmdc_ch0_axi", "mmdc_ch0_axi_podf", base + 0x74, 20); clk[mmdc_ch1_axi] = imx_clk_gate2("mmdc_ch1_axi", "mmdc_ch1_axi_podf", base + 0x74, 22); clk[ocram] = imx_clk_gate2("ocram", "ahb", base + 0x74, 28); -- cgit v1.2.3 From 087bb28329f3ccda4e50cb4cf297542d7e773e20 Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Tue, 16 Apr 2013 22:11:19 +0800 Subject: ARM: imx: replicate the diagnostic register of boot cpu into secondary cores The diagnostic register holds the errata bits. Mostly bootloader does not bring up secondary cores, so that when errata bits are set in bootloader, they are set only for boot cpu. But on a SMP configuration, it should be equally done on every single core. Set up the diagnostic register for secondary cores by replicating the register from boot cpu. Signed-off-by: Shawn Guo Acked-by: Dirk Behme --- arch/arm/mach-imx/headsmp.S | 12 ++++++++++++ arch/arm/mach-imx/platsmp.c | 14 ++++++++++++++ 2 files changed, 26 insertions(+) diff --git a/arch/arm/mach-imx/headsmp.S b/arch/arm/mach-imx/headsmp.S index 67b9c48dcafe..627f16f0e9d1 100644 --- a/arch/arm/mach-imx/headsmp.S +++ b/arch/arm/mach-imx/headsmp.S @@ -18,8 +18,20 @@ .section ".text.head", "ax" #ifdef CONFIG_SMP +diag_reg_offset: + .word g_diag_reg - . + + .macro set_diag_reg + adr r0, diag_reg_offset + ldr r1, [r0] + add r1, r1, r0 @ r1 = physical &g_diag_reg + ldr r0, [r1] + mcr p15, 0, r0, c15, c0, 1 @ write diagnostic register + .endm + ENTRY(v7_secondary_startup) bl v7_invalidate_l1 + set_diag_reg b secondary_startup ENDPROC(v7_secondary_startup) #endif diff --git a/arch/arm/mach-imx/platsmp.c b/arch/arm/mach-imx/platsmp.c index 4a69305db65e..c6e1ab544882 100644 --- a/arch/arm/mach-imx/platsmp.c +++ b/arch/arm/mach-imx/platsmp.c @@ -12,6 +12,7 @@ #include #include +#include #include #include #include @@ -21,6 +22,7 @@ #define SCU_STANDBY_ENABLE (1 << 5) +u32 g_diag_reg; static void __iomem *scu_base; static struct map_desc scu_io_desc __initdata = { @@ -80,6 +82,18 @@ void imx_smp_prepare(void) static void __init imx_smp_prepare_cpus(unsigned int max_cpus) { imx_smp_prepare(); + + /* + * The diagnostic register holds the errata bits. Mostly bootloader + * does not bring up secondary cores, so that when errata bits are set + * in bootloader, they are set only for boot cpu. But on a SMP + * configuration, it should be equally done on every single core. + * Read the register from boot cpu here, and will replicate it into + * secondary cores when booting them. + */ + asm("mrc p15, 0, %0, c15, c0, 1" : "=r" (g_diag_reg) : : "cc"); + __cpuc_flush_dcache_area(&g_diag_reg, sizeof(g_diag_reg)); + outer_clean_range(__pa(&g_diag_reg), __pa(&g_diag_reg + 1)); } struct smp_operations imx_smp_ops __initdata = { -- cgit v1.2.3 From de78a23d73ba7f1d08f3e1aeaa0a03cb912c62a0 Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Fri, 3 May 2013 10:55:46 +0800 Subject: ARM: imx: fix typo in gpu3d_shader_sels There is no clock pll2_pfd9_720m. Instead it should be pll3_pfd0_720m. Fix the typo in gpu3d_shader_sels. Signed-off-by: Shawn Guo Acked-by: Dirk Behme --- arch/arm/mach-imx/clk-imx6q.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c index f2e1c62cf3ce..dda9a2bd3acb 100644 --- a/arch/arm/mach-imx/clk-imx6q.c +++ b/arch/arm/mach-imx/clk-imx6q.c @@ -186,7 +186,7 @@ static const char *audio_sels[] = { "pll4_post_div", "pll3_pfd2_508m", "pll3_pfd static const char *gpu_axi_sels[] = { "axi", "ahb", }; static const char *gpu2d_core_sels[] = { "axi", "pll3_usb_otg", "pll2_pfd0_352m", "pll2_pfd2_396m", }; static const char *gpu3d_core_sels[] = { "mmdc_ch0_axi", "pll3_usb_otg", "pll2_pfd1_594m", "pll2_pfd2_396m", }; -static const char *gpu3d_shader_sels[] = { "mmdc_ch0_axi", "pll3_usb_otg", "pll2_pfd1_594m", "pll2_pfd9_720m", }; +static const char *gpu3d_shader_sels[] = { "mmdc_ch0_axi", "pll3_usb_otg", "pll2_pfd1_594m", "pll3_pfd0_720m", }; static const char *ipu_sels[] = { "mmdc_ch0_axi", "pll2_pfd2_396m", "pll3_120m", "pll3_pfd1_540m", }; static const char *ldb_di_sels[] = { "pll5_video", "pll2_pfd0_352m", "pll2_pfd2_396m", "mmdc_ch1_axi", "pll3_usb_otg", }; static const char *ipu_di_pre_sels[] = { "mmdc_ch0_axi", "pll3_usb_otg", "pll5_video_div", "pll2_pfd0_352m", "pll2_pfd2_396m", "pll3_pfd1_540m", }; -- cgit v1.2.3 From 625cdd78d119d5848ac3c47d129bdf5f23f64120 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Sat, 11 May 2013 19:13:49 +0300 Subject: svcauth_gss: fix error code in use_gss_proxy() This should return zero on success and -EBUSY on error so the type needs to be int instead of bool. Signed-off-by: Dan Carpenter Signed-off-by: J. Bruce Fields --- net/sunrpc/auth_gss/svcauth_gss.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/sunrpc/auth_gss/svcauth_gss.c b/net/sunrpc/auth_gss/svcauth_gss.c index 871c73c92165..2c6a1ece54bf 100644 --- a/net/sunrpc/auth_gss/svcauth_gss.c +++ b/net/sunrpc/auth_gss/svcauth_gss.c @@ -1287,7 +1287,7 @@ static bool use_gss_proxy(struct net *net) #ifdef CONFIG_PROC_FS -static bool set_gss_proxy(struct net *net, int type) +static int set_gss_proxy(struct net *net, int type) { struct sunrpc_net *sn = net_generic(net, sunrpc_net_id); int ret = 0; -- cgit v1.2.3 From d34c671debe3d327424a9951a5c3a81065d0474d Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Thu, 18 Apr 2013 22:44:29 +0200 Subject: ARM: sunxi: Fix Mini X-plus device tree build Commit b00adbe0 ("ARM: sunxi: Rename uart nodes to serial") changed the node names in the DTSI, changes that were not accordingly made to the Mini X-Plus device tree. This breakage slipped through because it was not properly declared in the Makefile. Fix both issues. Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/Makefile | 4 +++- arch/arm/boot/dts/sun4i-a10-mini-xplus.dts | 4 ++-- 2 files changed, 5 insertions(+), 3 deletions(-) diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index b9f7121e6ecf..f0895c581a89 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -177,7 +177,9 @@ dtb-$(CONFIG_ARCH_SPEAR3XX)+= spear300-evb.dtb \ spear320-evb.dtb \ spear320-hmi.dtb dtb-$(CONFIG_ARCH_SPEAR6XX)+= spear600-evb.dtb -dtb-$(CONFIG_ARCH_SUNXI) += sun4i-a10-cubieboard.dtb \ +dtb-$(CONFIG_ARCH_SUNXI) += \ + sun4i-a10-cubieboard.dtb \ + sun4i-a10-mini-xplus.dtb \ sun4i-a10-hackberry.dtb \ sun5i-a13-olinuxino.dtb dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \ diff --git a/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts b/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts index 4a7c35d6726a..078ed7f618d7 100644 --- a/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts +++ b/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts @@ -22,8 +22,8 @@ bootargs = "earlyprintk console=ttyS0,115200"; }; - soc { - uart0: uart@01c28000 { + soc@01c20000 { + uart0: serial@01c28000 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins_a>; status = "okay"; -- cgit v1.2.3 From be3cd268d1d1837aaed937c2fc85b3d39d2f1b50 Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Tue, 9 Apr 2013 23:26:18 +0200 Subject: ARM: mvebu: do not duplicate the mpic alias The mpic alias is already defined in the common armada-370-xp.dtsi, so there's no need to repeat it at the armada-xp.dtsi and armada-370.dtsi level. Signed-off-by: Thomas Petazzoni Signed-off-by: Jason Cooper --- arch/arm/boot/dts/armada-370.dtsi | 2 +- arch/arm/boot/dts/armada-xp.dtsi | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi index b2c1b5af9749..0c9130b6fb80 100644 --- a/arch/arm/boot/dts/armada-370.dtsi +++ b/arch/arm/boot/dts/armada-370.dtsi @@ -43,7 +43,7 @@ wt-override; }; - mpic: interrupt-controller@20000 { + interrupt-controller@20000 { reg = <0x20a00 0x1d0>, <0x21870 0x58>; }; diff --git a/arch/arm/boot/dts/armada-xp.dtsi b/arch/arm/boot/dts/armada-xp.dtsi index bacab11c10dc..5b902f9a3af2 100644 --- a/arch/arm/boot/dts/armada-xp.dtsi +++ b/arch/arm/boot/dts/armada-xp.dtsi @@ -31,7 +31,7 @@ wt-override; }; - mpic: interrupt-controller@20000 { + interrupt-controller@20000 { reg = <0x20a00 0x2d0>, <0x21070 0x58>; }; -- cgit v1.2.3 From 99e11334dcb846f9b76fb808196c7f47aa83abb3 Mon Sep 17 00:00:00 2001 From: Martin Michlmayr Date: Sun, 21 Apr 2013 17:14:00 +0100 Subject: Kirkwood: Enable PCIe port 1 on QNAP TS-11x/TS-21x Enable KW_PCIE1 on QNAP TS-11x/TS-21x devices as newer revisions (rev 1.3) have a USB 3.0 chip from Etron on PCIe port 1. Thanks to Marek Vasut for identifying this issue! Cc: # v2.6.36.x Signed-off-by: Martin Michlmayr Tested-by: Marek Vasut Acked-by: Andrew Lunn Signed-off-by: Jason Cooper --- arch/arm/mach-kirkwood/ts219-setup.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-kirkwood/ts219-setup.c b/arch/arm/mach-kirkwood/ts219-setup.c index 283abff90228..e1267d6b468f 100644 --- a/arch/arm/mach-kirkwood/ts219-setup.c +++ b/arch/arm/mach-kirkwood/ts219-setup.c @@ -124,7 +124,7 @@ static void __init qnap_ts219_init(void) static int __init ts219_pci_init(void) { if (machine_is_ts219()) - kirkwood_pcie_init(KW_PCIE0); + kirkwood_pcie_init(KW_PCIE1 | KW_PCIE0); return 0; } -- cgit v1.2.3 From 7c14068f5a08d57d5ea98ef3668218e654617095 Mon Sep 17 00:00:00 2001 From: Sebastian Hesselbarth Date: Fri, 10 May 2013 22:12:27 +0200 Subject: ARM: plat-orion: add missing ehci include to common.h Removing orion ehci include from board files will raise a compiler error because plat/common.h is using an enum provided by orion ehci but not including the include itself. This just adds the missing include. Signed-off-by: Sebastian Hesselbarth Signed-off-by: Jason Cooper --- arch/arm/plat-orion/include/plat/common.h | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/plat-orion/include/plat/common.h b/arch/arm/plat-orion/include/plat/common.h index e06fc5fefa14..d9a24f605a2b 100644 --- a/arch/arm/plat-orion/include/plat/common.h +++ b/arch/arm/plat-orion/include/plat/common.h @@ -10,6 +10,7 @@ #ifndef __PLAT_COMMON_H #include +#include struct dsa_platform_data; struct mv_sata_platform_data; -- cgit v1.2.3 From 00ed4a0bd964555fe9276f2299564c384d50ae7d Mon Sep 17 00:00:00 2001 From: Ezequiel Garcia Date: Mon, 13 May 2013 12:22:53 -0300 Subject: ARM: mvebu: Add a ranges entry to translate devbus childs With the latest device tree reorganization which introduced the 'internal-reg' node, now the only region translated is the internal register's. This makes the description of the hardware incomplete, for it lacks the Device Bus childs address space. In order to fix this, it's required to add a 'ranges' entry with a suitable address space to map Device Bus childs, on a per-board basis. Signed-off-by: Ezequiel Garcia Signed-off-by: Jason Cooper --- arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts index f14d36c46159..46b785064dd8 100644 --- a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts +++ b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts @@ -27,6 +27,9 @@ }; soc { + ranges = <0 0 0xd0000000 0x100000 + 0xf0000000 0 0xf0000000 0x8000000>; + internal-regs { serial@12000 { clock-frequency = <250000000>; -- cgit v1.2.3 From 3fab70c165795431f00ddf9be8b84ddd07bd1f8f Mon Sep 17 00:00:00 2001 From: Lingzhu Xiang Date: Fri, 10 May 2013 18:29:21 +0800 Subject: efivarfs: Never return ENOENT from firmware again Previously in 1fa7e69 efi_status_to_err() translated firmware status EFI_NOT_FOUND to -EIO instead of -ENOENT for efivarfs operations to avoid confusion. After refactoring in e14ab23, it is also used in other places where the translation may be unnecessary. So move the translation to efivarfs specific code. Also return EOF for reading zero-length files, which is what users would expect. Cc: Josh Boyer Cc: Jeremy Kerr Cc: Lee, Chun-Yi Cc: Andy Whitcroft Signed-off-by: Lingzhu Xiang Signed-off-by: Matt Fleming --- fs/efivarfs/file.c | 14 ++++++++++++-- 1 file changed, 12 insertions(+), 2 deletions(-) diff --git a/fs/efivarfs/file.c b/fs/efivarfs/file.c index bfb531564319..8dd524f32284 100644 --- a/fs/efivarfs/file.c +++ b/fs/efivarfs/file.c @@ -44,8 +44,11 @@ static ssize_t efivarfs_file_write(struct file *file, bytes = efivar_entry_set_get_size(var, attributes, &datasize, data, &set); - if (!set && bytes) + if (!set && bytes) { + if (bytes == -ENOENT) + bytes = -EIO; goto out; + } if (bytes == -ENOENT) { drop_nlink(inode); @@ -76,7 +79,14 @@ static ssize_t efivarfs_file_read(struct file *file, char __user *userbuf, int err; err = efivar_entry_size(var, &datasize); - if (err) + + /* + * efivarfs represents uncommitted variables with + * zero-length files. Reading them should return EOF. + */ + if (err == -ENOENT) + return 0; + else if (err) return err; data = kmalloc(datasize + sizeof(attributes), GFP_KERNEL); -- cgit v1.2.3 From d51df2c5d3c1f2c639708fc644ed67296bb51dc5 Mon Sep 17 00:00:00 2001 From: Seiji Aguchi Date: Fri, 10 May 2013 20:45:36 +0000 Subject: efivar: fix oops in efivar_update_sysfs_entries() caused by memory reuse The loop in efivar_update_sysfs_entries() reuses the same allocation for entries each time it calls efivar_create_sysfs_entry(entry). This is wrong because efivar_create_sysfs_entry() expects to keep the memory it was passed, so the caller may not free it (and may not pass the same memory in multiple times). This leads to the oops below. Fix by getting a new allocation each time we go around the loop. ---[ end trace ba4907d5c519d111 ]--- BUG: unable to handle kernel NULL pointer dereference at (null) IP: [] efivar_entry_find+0x14f/0x2d0 PGD 0 Oops: 0000 [#2] SMP Modules linked in: oops(OF+) ebtable_nat ebtables xt_CHECKSUM [...] CPU: 0 PID: 301 Comm: kworker/0:2 Tainted: GF D O 3.9.0+ #1 Hardware name: LENOVO 4291EV7/4291EV7, BIOS 8DET52WW (1.22 ) 09/15/2011 Workqueue: events efivar_update_sysfs_entries task: ffff8801955920c0 ti: ffff88019413e000 task.ti: ffff88019413e000 RIP: 0010:[] [] efivar_entry_find+0x14f/0x2d0 RSP: 0018:ffff88019413fa48 EFLAGS: 00010006 RAX: 0000000000000000 RBX: ffff880195d87c00 RCX: ffffffff81ab6f60 RDX: ffff88019413fb88 RSI: 0000000000000400 RDI: ffff880196254000 RBP: ffff88019413fbd8 R08: 0000000000000000 R09: ffff8800dad99037 R10: ffff880195d87c00 R11: 0000000000000430 R12: ffffffff81ab6f60 R13: fffffffffffff7d8 R14: ffff880196254000 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff88019e200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 0000000001a0b000 CR4: 00000000000407f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Stack: ffff88019413fb78 ffff88019413fb88 ffffffff81e85d60 03000000972b5c00 ffff88019413fa29 ffffffff81e85d60 ffff88019413fbfb 0000000197087280 00000000000000fe 0000000000000001 ffffffff81e85dd9 ffff880197087280 Call Trace: [] ? idr_get_empty_slot+0x131/0x240 [] ? put_dec+0x72/0x90 [] ? cache_alloc_refill+0x170/0x2f0 [] efivar_update_sysfs_entry+0x150/0x220 [] ? efi_call2+0x9/0x70 [] ? virt_efi_get_next_variable+0x47/0x1b0 [] ? kmem_cache_alloc_trace+0x1af/0x1c0 [] efivar_init+0x2c3/0x380 [] ? efivar_delete+0xd0/0xd0 [] efivar_update_sysfs_entries+0x6f/0x90 [] process_one_work+0x183/0x490 [] worker_thread+0x120/0x3a0 [] ? manage_workers+0x160/0x160 [] kthread+0xce/0xe0 [] ? kthread_freezable_should_stop+0x70/0x70 [] ret_from_fork+0x7c/0xb0 [] ? kthread_freezable_should_stop+0x70/0x70 Code: 8d 55 b0 48 8d 45 a0 49 81 ed 28 08 00 00 48 89 95 78 fe [...] RIP [] efivar_entry_find+0x14f/0x2d0 RSP CR2: 0000000000000000 ---[ end trace ba4907d5c519d112 ]--- Cc: James Bottomley Cc: Tomoki Sekiyama Signed-off-by: Seiji Aguchi Signed-off-by: Matt Fleming --- drivers/firmware/efi/efivars.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) diff --git a/drivers/firmware/efi/efivars.c b/drivers/firmware/efi/efivars.c index b623c599e572..8bd1bb6dbe47 100644 --- a/drivers/firmware/efi/efivars.c +++ b/drivers/firmware/efi/efivars.c @@ -523,13 +523,11 @@ static void efivar_update_sysfs_entries(struct work_struct *work) struct efivar_entry *entry; int err; - entry = kzalloc(sizeof(*entry), GFP_KERNEL); - if (!entry) - return; - /* Add new sysfs entries */ while (1) { - memset(entry, 0, sizeof(*entry)); + entry = kzalloc(sizeof(*entry), GFP_KERNEL); + if (!entry) + return; err = efivar_init(efivar_update_sysfs_entry, entry, true, false, &efivar_sysfs_list); -- cgit v1.2.3 From 6d31727a0b6fe7206725c93508e6d2065f16ff03 Mon Sep 17 00:00:00 2001 From: Andrew Lunn Date: Mon, 13 May 2013 19:32:14 +0000 Subject: ARM: Orion: Remove redundant init_dma_coherent_pool_size() The patch: 387870f mm: dmapool: use provided gfp flags for all dma_alloc_coherent() calls makes these calls on Kirkwood and Orion5x redundant. The drivers are not making atomic requests for coherent memory and hence the default pool size is now sufficient. Jason Cooper added mach-mvebu/ hunk, and corrected minor typos in commit message. Signed-off-by: Andrew Lunn Signed-off-by: Jason Cooper --- arch/arm/mach-kirkwood/common.c | 6 ------ arch/arm/mach-mvebu/armada-370-xp.c | 7 ------- arch/arm/mach-orion5x/common.c | 7 ------- 3 files changed, 20 deletions(-) diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c index c2cae69e6d2b..f38922897563 100644 --- a/arch/arm/mach-kirkwood/common.c +++ b/arch/arm/mach-kirkwood/common.c @@ -528,12 +528,6 @@ void __init kirkwood_init_early(void) { orion_time_set_base(TIMER_VIRT_BASE); - /* - * Some Kirkwood devices allocate their coherent buffers from atomic - * context. Increase size of atomic coherent pool to make sure such - * the allocations won't fail. - */ - init_dma_coherent_pool_size(SZ_1M); mvebu_mbus_init("marvell,kirkwood-mbus", BRIDGE_WINS_BASE, BRIDGE_WINS_SZ, DDR_WINDOW_CPU_BASE, DDR_WINDOW_CPU_SZ); diff --git a/arch/arm/mach-mvebu/armada-370-xp.c b/arch/arm/mach-mvebu/armada-370-xp.c index 42a4cb3087e2..1c48890bb72b 100644 --- a/arch/arm/mach-mvebu/armada-370-xp.c +++ b/arch/arm/mach-mvebu/armada-370-xp.c @@ -53,13 +53,6 @@ void __init armada_370_xp_init_early(void) { char *mbus_soc_name; - /* - * Some Armada 370/XP devices allocate their coherent buffers - * from atomic context. Increase size of atomic coherent pool - * to make sure such the allocations won't fail. - */ - init_dma_coherent_pool_size(SZ_1M); - /* * This initialization will be replaced by a DT-based * initialization once the mvebu-mbus driver gains DT support. diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c index b97fd672e89d..f8a6db9239bf 100644 --- a/arch/arm/mach-orion5x/common.c +++ b/arch/arm/mach-orion5x/common.c @@ -199,13 +199,6 @@ void __init orion5x_init_early(void) orion_time_set_base(TIMER_VIRT_BASE); - /* - * Some Orion5x devices allocate their coherent buffers from atomic - * context. Increase size of atomic coherent pool to make sure such - * the allocations won't fail. - */ - init_dma_coherent_pool_size(SZ_1M); - /* Initialize the MBUS driver */ orion5x_pcie_id(&dev, &rev); if (dev == MV88F5281_DEV_ID) -- cgit v1.2.3 From 286233e604d79f0c7fa04abec2180d5d89a74749 Mon Sep 17 00:00:00 2001 From: Horia Geanta Date: Fri, 10 May 2013 15:08:39 +0300 Subject: crypto: caam - fix inconsistent assoc dma mapping direction req->assoc is dma mapped BIDIRECTIONAL and unmapped TO_DEVICE. Since it is read-only for the device, use TO_DEVICE both for mapping and unmapping. Cc: # 3.9, 3.8 Signed-off-by: Horia Geanta Signed-off-by: Herbert Xu --- drivers/crypto/caam/caamalg.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/crypto/caam/caamalg.c b/drivers/crypto/caam/caamalg.c index 765fdf5ce579..bf416a8391a7 100644 --- a/drivers/crypto/caam/caamalg.c +++ b/drivers/crypto/caam/caamalg.c @@ -1154,7 +1154,7 @@ static struct aead_edesc *aead_edesc_alloc(struct aead_request *req, dst_nents = sg_count(req->dst, req->cryptlen, &dst_chained); sgc = dma_map_sg_chained(jrdev, req->assoc, assoc_nents ? : 1, - DMA_BIDIRECTIONAL, assoc_chained); + DMA_TO_DEVICE, assoc_chained); if (likely(req->src == req->dst)) { sgc = dma_map_sg_chained(jrdev, req->src, src_nents ? : 1, DMA_BIDIRECTIONAL, src_chained); @@ -1336,7 +1336,7 @@ static struct aead_edesc *aead_giv_edesc_alloc(struct aead_givcrypt_request dst_nents = sg_count(req->dst, req->cryptlen, &dst_chained); sgc = dma_map_sg_chained(jrdev, req->assoc, assoc_nents ? : 1, - DMA_BIDIRECTIONAL, assoc_chained); + DMA_TO_DEVICE, assoc_chained); if (likely(req->src == req->dst)) { sgc = dma_map_sg_chained(jrdev, req->src, src_nents ? : 1, DMA_BIDIRECTIONAL, src_chained); -- cgit v1.2.3 From ee8209fd026b074bb8eb75bece516a338a281b1b Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Wed, 8 May 2013 11:55:48 +0300 Subject: dma: acpi-dma: parse CSRT to extract additional resources Since we have CSRT only to get additional DMA controller resources, let's get rid of drivers/acpi/csrt.c and move its logic inside ACPI DMA helpers code. Signed-off-by: Andy Shevchenko Signed-off-by: Mika Westerberg Acked-by: Rafael J. Wysocki Signed-off-by: Vinod Koul --- drivers/acpi/Makefile | 1 - drivers/acpi/csrt.c | 159 ------------------------------------------- drivers/acpi/internal.h | 1 - drivers/acpi/scan.c | 1 - drivers/dma/acpi-dma.c | 172 ++++++++++++++++++++++++++++++++++++++++++++++- include/linux/acpi_dma.h | 4 ++ 6 files changed, 173 insertions(+), 165 deletions(-) delete mode 100644 drivers/acpi/csrt.c diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile index ecb743bf05a5..6050c8028dce 100644 --- a/drivers/acpi/Makefile +++ b/drivers/acpi/Makefile @@ -38,7 +38,6 @@ acpi-y += processor_core.o acpi-y += ec.o acpi-$(CONFIG_ACPI_DOCK) += dock.o acpi-y += pci_root.o pci_link.o pci_irq.o -acpi-y += csrt.o acpi-$(CONFIG_X86_INTEL_LPSS) += acpi_lpss.o acpi-y += acpi_platform.o acpi-y += power.o diff --git a/drivers/acpi/csrt.c b/drivers/acpi/csrt.c deleted file mode 100644 index 5c15a91faf0b..000000000000 --- a/drivers/acpi/csrt.c +++ /dev/null @@ -1,159 +0,0 @@ -/* - * Support for Core System Resources Table (CSRT) - * - * Copyright (C) 2013, Intel Corporation - * Authors: Mika Westerberg - * Andy Shevchenko - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#define pr_fmt(fmt) "ACPI: CSRT: " fmt - -#include -#include -#include -#include -#include -#include - -ACPI_MODULE_NAME("CSRT"); - -static int __init acpi_csrt_parse_shared_info(struct platform_device *pdev, - const struct acpi_csrt_group *grp) -{ - const struct acpi_csrt_shared_info *si; - struct resource res[3]; - size_t nres; - int ret; - - memset(res, 0, sizeof(res)); - nres = 0; - - si = (const struct acpi_csrt_shared_info *)&grp[1]; - /* - * The peripherals that are listed on CSRT typically support only - * 32-bit addresses so we only use the low part of MMIO base for - * now. - */ - if (!si->mmio_base_high && si->mmio_base_low) { - /* - * There is no size of the memory resource in shared_info - * so we assume that it is 4k here. - */ - res[nres].start = si->mmio_base_low; - res[nres].end = res[0].start + SZ_4K - 1; - res[nres++].flags = IORESOURCE_MEM; - } - - if (si->gsi_interrupt) { - int irq = acpi_register_gsi(NULL, si->gsi_interrupt, - si->interrupt_mode, - si->interrupt_polarity); - res[nres].start = irq; - res[nres].end = irq; - res[nres++].flags = IORESOURCE_IRQ; - } - - if (si->base_request_line || si->num_handshake_signals) { - /* - * We pass the driver a DMA resource describing the range - * of request lines the device supports. - */ - res[nres].start = si->base_request_line; - res[nres].end = res[nres].start + si->num_handshake_signals - 1; - res[nres++].flags = IORESOURCE_DMA; - } - - ret = platform_device_add_resources(pdev, res, nres); - if (ret) { - if (si->gsi_interrupt) - acpi_unregister_gsi(si->gsi_interrupt); - return ret; - } - - return 0; -} - -static int __init -acpi_csrt_parse_resource_group(const struct acpi_csrt_group *grp) -{ - struct platform_device *pdev; - char vendor[5], name[16]; - int ret, i; - - vendor[0] = grp->vendor_id; - vendor[1] = grp->vendor_id >> 8; - vendor[2] = grp->vendor_id >> 16; - vendor[3] = grp->vendor_id >> 24; - vendor[4] = '\0'; - - if (grp->shared_info_length != sizeof(struct acpi_csrt_shared_info)) - return -ENODEV; - - snprintf(name, sizeof(name), "%s%04X", vendor, grp->device_id); - pdev = platform_device_alloc(name, PLATFORM_DEVID_AUTO); - if (!pdev) - return -ENOMEM; - - /* Add resources based on the shared info */ - ret = acpi_csrt_parse_shared_info(pdev, grp); - if (ret) - goto fail; - - ret = platform_device_add(pdev); - if (ret) - goto fail; - - for (i = 0; i < pdev->num_resources; i++) - dev_dbg(&pdev->dev, "%pR\n", &pdev->resource[i]); - - return 0; - -fail: - platform_device_put(pdev); - return ret; -} - -/* - * CSRT or Core System Resources Table is a proprietary ACPI table - * introduced by Microsoft. This table can contain devices that are not in - * the system DSDT table. In particular DMA controllers might be described - * here. - * - * We present these devices as normal platform devices that don't have ACPI - * IDs or handle. The platform device name will be something like - * ..auto for example: INTL9C06.0.auto. - */ -void __init acpi_csrt_init(void) -{ - struct acpi_csrt_group *grp, *end; - struct acpi_table_csrt *csrt; - acpi_status status; - int ret; - - status = acpi_get_table(ACPI_SIG_CSRT, 0, - (struct acpi_table_header **)&csrt); - if (ACPI_FAILURE(status)) { - if (status != AE_NOT_FOUND) - pr_warn("failed to get the CSRT table\n"); - return; - } - - pr_debug("parsing CSRT table for devices\n"); - - grp = (struct acpi_csrt_group *)(csrt + 1); - end = (struct acpi_csrt_group *)((void *)csrt + csrt->header.length); - - while (grp < end) { - ret = acpi_csrt_parse_resource_group(grp); - if (ret) { - pr_warn("error in parsing resource group: %d\n", ret); - return; - } - - grp = (struct acpi_csrt_group *)((void *)grp + grp->length); - } -} diff --git a/drivers/acpi/internal.h b/drivers/acpi/internal.h index 6f1afd9118c8..297cbf456f86 100644 --- a/drivers/acpi/internal.h +++ b/drivers/acpi/internal.h @@ -35,7 +35,6 @@ void acpi_pci_link_init(void); void acpi_pci_root_hp_init(void); void acpi_platform_init(void); int acpi_sysfs_init(void); -void acpi_csrt_init(void); #ifdef CONFIG_ACPI_CONTAINER void acpi_container_init(void); #else diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c index fe158fd4f1df..aacc08f951aa 100644 --- a/drivers/acpi/scan.c +++ b/drivers/acpi/scan.c @@ -2042,7 +2042,6 @@ int __init acpi_scan_init(void) acpi_pci_link_init(); acpi_platform_init(); acpi_lpss_init(); - acpi_csrt_init(); acpi_container_init(); acpi_memory_hotplug_init(); diff --git a/drivers/dma/acpi-dma.c b/drivers/dma/acpi-dma.c index ba6fc62e9651..5a18f82f732a 100644 --- a/drivers/dma/acpi-dma.c +++ b/drivers/dma/acpi-dma.c @@ -4,7 +4,8 @@ * Based on of-dma.c * * Copyright (C) 2013, Intel Corporation - * Author: Andy Shevchenko + * Authors: Andy Shevchenko + * Mika Westerberg * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -16,12 +17,124 @@ #include #include #include +#include #include #include static LIST_HEAD(acpi_dma_list); static DEFINE_MUTEX(acpi_dma_lock); +/** + * acpi_dma_parse_resource_group - match device and parse resource group + * @grp: CSRT resource group + * @adev: ACPI device to match with + * @adma: struct acpi_dma of the given DMA controller + * + * Returns 1 on success, 0 when no information is available, or appropriate + * errno value on error. + * + * In order to match a device from DSDT table to the corresponding CSRT device + * we use MMIO address and IRQ. + */ +static int acpi_dma_parse_resource_group(const struct acpi_csrt_group *grp, + struct acpi_device *adev, struct acpi_dma *adma) +{ + const struct acpi_csrt_shared_info *si; + struct list_head resource_list; + struct resource_list_entry *rentry; + resource_size_t mem = 0, irq = 0; + u32 vendor_id; + int ret; + + if (grp->shared_info_length != sizeof(struct acpi_csrt_shared_info)) + return -ENODEV; + + INIT_LIST_HEAD(&resource_list); + ret = acpi_dev_get_resources(adev, &resource_list, NULL, NULL); + if (ret <= 0) + return 0; + + list_for_each_entry(rentry, &resource_list, node) { + if (resource_type(&rentry->res) == IORESOURCE_MEM) + mem = rentry->res.start; + else if (resource_type(&rentry->res) == IORESOURCE_IRQ) + irq = rentry->res.start; + } + + acpi_dev_free_resource_list(&resource_list); + + /* Consider initial zero values as resource not found */ + if (mem == 0 && irq == 0) + return 0; + + si = (const struct acpi_csrt_shared_info *)&grp[1]; + + /* Match device by MMIO and IRQ */ + if (si->mmio_base_low != mem || si->gsi_interrupt != irq) + return 0; + + vendor_id = le32_to_cpu(grp->vendor_id); + dev_dbg(&adev->dev, "matches with %.4s%04X (rev %u)\n", + (char *)&vendor_id, grp->device_id, grp->revision); + + /* Check if the request line range is available */ + if (si->base_request_line == 0 && si->num_handshake_signals == 0) + return 0; + + adma->base_request_line = si->base_request_line; + adma->end_request_line = si->base_request_line + + si->num_handshake_signals - 1; + + dev_dbg(&adev->dev, "request line base: 0x%04x end: 0x%04x\n", + adma->base_request_line, adma->end_request_line); + + return 1; +} + +/** + * acpi_dma_parse_csrt - parse CSRT to exctract additional DMA resources + * @adev: ACPI device to match with + * @adma: struct acpi_dma of the given DMA controller + * + * CSRT or Core System Resources Table is a proprietary ACPI table + * introduced by Microsoft. This table can contain devices that are not in + * the system DSDT table. In particular DMA controllers might be described + * here. + * + * We are using this table to get the request line range of the specific DMA + * controller to be used later. + * + */ +static void acpi_dma_parse_csrt(struct acpi_device *adev, struct acpi_dma *adma) +{ + struct acpi_csrt_group *grp, *end; + struct acpi_table_csrt *csrt; + acpi_status status; + int ret; + + status = acpi_get_table(ACPI_SIG_CSRT, 0, + (struct acpi_table_header **)&csrt); + if (ACPI_FAILURE(status)) { + if (status != AE_NOT_FOUND) + dev_warn(&adev->dev, "failed to get the CSRT table\n"); + return; + } + + grp = (struct acpi_csrt_group *)(csrt + 1); + end = (struct acpi_csrt_group *)((void *)csrt + csrt->header.length); + + while (grp < end) { + ret = acpi_dma_parse_resource_group(grp, adev, adma); + if (ret < 0) { + dev_warn(&adev->dev, + "error in parsing resource group\n"); + return; + } + + grp = (struct acpi_csrt_group *)((void *)grp + grp->length); + } +} + /** * acpi_dma_controller_register - Register a DMA controller to ACPI DMA helpers * @dev: struct device of DMA controller @@ -61,6 +174,8 @@ int acpi_dma_controller_register(struct device *dev, adma->acpi_dma_xlate = acpi_dma_xlate; adma->data = data; + acpi_dma_parse_csrt(adev, adma); + /* Now queue acpi_dma controller structure in list */ mutex_lock(&acpi_dma_lock); list_add_tail(&adma->dma_controllers, &acpi_dma_list); @@ -149,6 +264,45 @@ void devm_acpi_dma_controller_free(struct device *dev) } EXPORT_SYMBOL_GPL(devm_acpi_dma_controller_free); +/** + * acpi_dma_update_dma_spec - prepare dma specifier to pass to translation function + * @adma: struct acpi_dma of DMA controller + * @dma_spec: dma specifier to update + * + * Returns 0, if no information is avaiable, -1 on mismatch, and 1 otherwise. + * + * Accordingly to ACPI 5.0 Specification Table 6-170 "Fixed DMA Resource + * Descriptor": + * DMA Request Line bits is a platform-relative number uniquely + * identifying the request line assigned. Request line-to-Controller + * mapping is done in a controller-specific OS driver. + * That's why we can safely adjust slave_id when the appropriate controller is + * found. + */ +static int acpi_dma_update_dma_spec(struct acpi_dma *adma, + struct acpi_dma_spec *dma_spec) +{ + /* Set link to the DMA controller device */ + dma_spec->dev = adma->dev; + + /* Check if the request line range is available */ + if (adma->base_request_line == 0 && adma->end_request_line == 0) + return 0; + + /* Check if slave_id falls to the range */ + if (dma_spec->slave_id < adma->base_request_line || + dma_spec->slave_id > adma->end_request_line) + return -1; + + /* + * Here we adjust slave_id. It should be a relative number to the base + * request line. + */ + dma_spec->slave_id -= adma->base_request_line; + + return 1; +} + struct acpi_dma_parser_data { struct acpi_dma_spec dma_spec; size_t index; @@ -193,6 +347,7 @@ struct dma_chan *acpi_dma_request_slave_chan_by_index(struct device *dev, struct acpi_device *adev; struct acpi_dma *adma; struct dma_chan *chan = NULL; + int found; /* Check if the device was enumerated by ACPI */ if (!dev || !ACPI_HANDLE(dev)) @@ -219,9 +374,20 @@ struct dma_chan *acpi_dma_request_slave_chan_by_index(struct device *dev, mutex_lock(&acpi_dma_lock); list_for_each_entry(adma, &acpi_dma_list, dma_controllers) { - dma_spec->dev = adma->dev; + /* + * We are not going to call translation function if slave_id + * doesn't fall to the request range. + */ + found = acpi_dma_update_dma_spec(adma, dma_spec); + if (found < 0) + continue; chan = adma->acpi_dma_xlate(dma_spec, adma); - if (chan) + /* + * Try to get a channel only from the DMA controller that + * matches the slave_id. See acpi_dma_update_dma_spec() + * description for the details. + */ + if (found > 0 || chan) break; } diff --git a/include/linux/acpi_dma.h b/include/linux/acpi_dma.h index d09deabc7bf6..fb0298082916 100644 --- a/include/linux/acpi_dma.h +++ b/include/linux/acpi_dma.h @@ -37,6 +37,8 @@ struct acpi_dma_spec { * @dev: struct device of this controller * @acpi_dma_xlate: callback function to find a suitable channel * @data: private data used by a callback function + * @base_request_line: first supported request line (CSRT) + * @end_request_line: last supported request line (CSRT) */ struct acpi_dma { struct list_head dma_controllers; @@ -44,6 +46,8 @@ struct acpi_dma { struct dma_chan *(*acpi_dma_xlate) (struct acpi_dma_spec *, struct acpi_dma *); void *data; + unsigned short base_request_line; + unsigned short end_request_line; }; /* Used with acpi_dma_simple_xlate() */ -- cgit v1.2.3 From b59cc200ac025aca597fb21862c1c9e667f2eff2 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Wed, 8 May 2013 11:55:49 +0300 Subject: ACPI / LPSS: register clock device for Lynxpoint DMA properly The DMA controller in Lynxpoint is enumerated as a regular ACPI device now. To work properly it is using the LPSS root clock as a functional clock. That's why we have to register the clock device accordingly to the ACPI ID of the DMA controller. The acpi_lpss.c module is responsible to do the job. This patch also removes hardcoded name of the DMA device in clk-lpt.c and the name of the root clock in acpi_lpss.c. Signed-off-by: Rafael J. Wysocki Signed-off-by: Andy Shevchenko Signed-off-by: Vinod Koul --- drivers/acpi/acpi_lpss.c | 26 ++++++++++++++++++++++---- drivers/clk/x86/clk-lpt.c | 15 +++++++++++---- include/linux/platform_data/clk-lpss.h | 5 +++++ 3 files changed, 38 insertions(+), 8 deletions(-) diff --git a/drivers/acpi/acpi_lpss.c b/drivers/acpi/acpi_lpss.c index b1c95422ce74..652fd5ce303c 100644 --- a/drivers/acpi/acpi_lpss.c +++ b/drivers/acpi/acpi_lpss.c @@ -35,11 +35,16 @@ ACPI_MODULE_NAME("acpi_lpss"); struct lpss_device_desc { bool clk_required; - const char *clk_parent; + const char *clkdev_name; bool ltr_required; unsigned int prv_offset; }; +static struct lpss_device_desc lpss_dma_desc = { + .clk_required = true, + .clkdev_name = "hclk", +}; + struct lpss_private_data { void __iomem *mmio_base; resource_size_t mmio_size; @@ -49,7 +54,6 @@ struct lpss_private_data { static struct lpss_device_desc lpt_dev_desc = { .clk_required = true, - .clk_parent = "lpss_clk", .prv_offset = 0x800, .ltr_required = true, }; @@ -60,6 +64,9 @@ static struct lpss_device_desc lpt_sdio_dev_desc = { }; static const struct acpi_device_id acpi_lpss_device_ids[] = { + /* Generic LPSS devices */ + { "INTL9C60", (unsigned long)&lpss_dma_desc }, + /* Lynxpoint LPSS devices */ { "INT33C0", (unsigned long)&lpt_dev_desc }, { "INT33C1", (unsigned long)&lpt_dev_desc }, @@ -91,16 +98,27 @@ static int register_device_clock(struct acpi_device *adev, struct lpss_private_data *pdata) { const struct lpss_device_desc *dev_desc = pdata->dev_desc; + struct lpss_clk_data *clk_data; if (!lpss_clk_dev) lpt_register_clock_device(); - if (!dev_desc->clk_parent || !pdata->mmio_base + clk_data = platform_get_drvdata(lpss_clk_dev); + if (!clk_data) + return -ENODEV; + + if (dev_desc->clkdev_name) { + clk_register_clkdev(clk_data->clk, dev_desc->clkdev_name, + dev_name(&adev->dev)); + return 0; + } + + if (!pdata->mmio_base || pdata->mmio_size < dev_desc->prv_offset + LPSS_CLK_SIZE) return -ENODATA; pdata->clk = clk_register_gate(NULL, dev_name(&adev->dev), - dev_desc->clk_parent, 0, + clk_data->name, 0, pdata->mmio_base + dev_desc->prv_offset, 0, 0, NULL); if (IS_ERR(pdata->clk)) diff --git a/drivers/clk/x86/clk-lpt.c b/drivers/clk/x86/clk-lpt.c index 5cf4f4686406..4f45eee9e33b 100644 --- a/drivers/clk/x86/clk-lpt.c +++ b/drivers/clk/x86/clk-lpt.c @@ -15,22 +15,29 @@ #include #include #include +#include #include #define PRV_CLOCK_PARAMS 0x800 static int lpt_clk_probe(struct platform_device *pdev) { + struct lpss_clk_data *drvdata; struct clk *clk; + drvdata = devm_kzalloc(&pdev->dev, sizeof(*drvdata), GFP_KERNEL); + if (!drvdata) + return -ENOMEM; + /* LPSS free running clock */ - clk = clk_register_fixed_rate(&pdev->dev, "lpss_clk", NULL, CLK_IS_ROOT, - 100000000); + drvdata->name = "lpss_clk"; + clk = clk_register_fixed_rate(&pdev->dev, drvdata->name, NULL, + CLK_IS_ROOT, 100000000); if (IS_ERR(clk)) return PTR_ERR(clk); - /* Shared DMA clock */ - clk_register_clkdev(clk, "hclk", "INTL9C60.0.auto"); + drvdata->clk = clk; + platform_set_drvdata(pdev, drvdata); return 0; } diff --git a/include/linux/platform_data/clk-lpss.h b/include/linux/platform_data/clk-lpss.h index 528e73ce46d2..23901992b9dd 100644 --- a/include/linux/platform_data/clk-lpss.h +++ b/include/linux/platform_data/clk-lpss.h @@ -13,6 +13,11 @@ #ifndef __CLK_LPSS_H #define __CLK_LPSS_H +struct lpss_clk_data { + const char *name; + struct clk *clk; +}; + extern int lpt_clk_init(void); #endif /* __CLK_LPSS_H */ -- cgit v1.2.3 From 972be324fe0adaa67717407510aa067a4ae53d2d Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Tue, 14 May 2013 09:06:17 +0200 Subject: microblaze: Initialize temp variable to remove compilation warning Compilation warning: arch/microblaze/kernel/cpu/cache.c:148:2: warning: 'temp' is used uninitialized in this function [-Wuninitialized] Signed-off-by: Michal Simek --- arch/microblaze/kernel/cpu/cache.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/microblaze/kernel/cpu/cache.c b/arch/microblaze/kernel/cpu/cache.c index 4254514b4c8c..a6e44410672d 100644 --- a/arch/microblaze/kernel/cpu/cache.c +++ b/arch/microblaze/kernel/cpu/cache.c @@ -140,7 +140,7 @@ do { \ /* It is used only first parameter for OP - for wic, wdc */ #define CACHE_RANGE_LOOP_1(start, end, line_length, op) \ do { \ - int volatile temp; \ + int volatile temp = 0; \ int align = ~(line_length - 1); \ end = ((end & align) == end) ? end - line_length : end & align; \ WARN_ON(end - start < 0); \ -- cgit v1.2.3 From eccaf52fee8305d5207ff110950a82c100e459bc Mon Sep 17 00:00:00 2001 From: "Lee, Chun-Yi" Date: Thu, 2 May 2013 22:07:01 +0800 Subject: x86, efi: initial the local variable of DataSize to zero That will be better initial the value of DataSize to zero for the input of GetVariable(), otherwise we will feed a random value. The debug log of input DataSize like this: ... [ 195.915612] EFI Variables Facility v0.08 2004-May-17 [ 195.915819] efi: size: 18446744071581821342 [ 195.915969] efi: size': 18446744071581821342 [ 195.916324] efi: size: 18446612150714306560 [ 195.916632] efi: size': 18446612150714306560 [ 195.917159] efi: size: 18446612150714306560 [ 195.917453] efi: size': 18446612150714306560 ... The size' is value that was returned by BIOS. After applied this patch: [ 82.442042] EFI Variables Facility v0.08 2004-May-17 [ 82.442202] efi: size: 0 [ 82.442360] efi: size': 1039 [ 82.443828] efi: size: 0 [ 82.444127] efi: size': 2616 [ 82.447057] efi: size: 0 [ 82.447356] efi: size': 5832 ... Found on Acer Aspire V3 BIOS, it will not return the size of data if we input a non-zero DataSize. Cc: Matthew Garrett Cc: H. Peter Anvin Signed-off-by: Lee, Chun-Yi Signed-off-by: Matt Fleming --- arch/x86/platform/efi/efi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/platform/efi/efi.c b/arch/x86/platform/efi/efi.c index 55856b2310d3..82089d8b1954 100644 --- a/arch/x86/platform/efi/efi.c +++ b/arch/x86/platform/efi/efi.c @@ -206,7 +206,7 @@ static efi_status_t virt_efi_get_next_variable(unsigned long *name_size, } if (boot_used_size && !finished) { - unsigned long size; + unsigned long size = 0; u32 attr; efi_status_t s; void *tmp; -- cgit v1.2.3 From 3210c05327e2b44b3bf96bab550d72cdb18b64e4 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Wed, 8 May 2013 14:29:01 +0100 Subject: ARM: ux500: Remove duplicated assignment of ab8500_platdata Since: "05ec260 mfd: db8500-prcmu: update resource passing", the AB8500's platform data 'ab8500_platdata' is passed directly as an attribute to 'db8500_prcmu_pdata', so there's no requirement to assign it a second time. In fact, it's only due to an ordering issue that the entire 'db8500_prcmu_pdata' data structure isn't completely over-written by the assignment in u8500_init_devices(). Signed-off-by: Lee Jones Signed-off-by: Linus Walleij --- arch/arm/mach-ux500/board-mop500.c | 6 +++--- arch/arm/mach-ux500/cpu-db8500.c | 4 +--- arch/arm/mach-ux500/setup.h | 2 +- 3 files changed, 5 insertions(+), 7 deletions(-) diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c index 3cd555ac6d0a..78389de94dde 100644 --- a/arch/arm/mach-ux500/board-mop500.c +++ b/arch/arm/mach-ux500/board-mop500.c @@ -623,7 +623,7 @@ static void __init mop500_init_machine(void) sdi0_reg_info.gpios[0].gpio = GPIO_SDMMC_1V8_3V_SEL; mop500_pinmaps_init(); - parent = u8500_init_devices(&ab8500_platdata); + parent = u8500_init_devices(); for (i = 0; i < ARRAY_SIZE(mop500_platform_devs); i++) mop500_platform_devs[i]->dev.parent = parent; @@ -660,7 +660,7 @@ static void __init snowball_init_machine(void) sdi0_reg_info.gpios[0].gpio = SNOWBALL_SDMMC_1V8_3V_GPIO; snowball_pinmaps_init(); - parent = u8500_init_devices(&ab8500_platdata); + parent = u8500_init_devices(); for (i = 0; i < ARRAY_SIZE(snowball_platform_devs); i++) snowball_platform_devs[i]->dev.parent = parent; @@ -698,7 +698,7 @@ static void __init hrefv60_init_machine(void) sdi0_reg_info.gpios[0].gpio = HREFV60_SDMMC_1V8_3V_GPIO; hrefv60_pinmaps_init(); - parent = u8500_init_devices(&ab8500_platdata); + parent = u8500_init_devices(); for (i = 0; i < ARRAY_SIZE(mop500_platform_devs); i++) mop500_platform_devs[i]->dev.parent = parent; diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c index e90b5ab23b6d..8894327283e1 100644 --- a/arch/arm/mach-ux500/cpu-db8500.c +++ b/arch/arm/mach-ux500/cpu-db8500.c @@ -206,7 +206,7 @@ static struct device * __init db8500_soc_device_init(void) /* * This function is called from the board init */ -struct device * __init u8500_init_devices(struct ab8500_platform_data *ab8500) +struct device * __init u8500_init_devices(void) { struct device *parent; int i; @@ -220,8 +220,6 @@ struct device * __init u8500_init_devices(struct ab8500_platform_data *ab8500) for (i = 0; i < ARRAY_SIZE(platform_devs); i++) platform_devs[i]->dev.parent = parent; - db8500_prcmu_device.dev.platform_data = ab8500; - platform_add_devices(platform_devs, ARRAY_SIZE(platform_devs)); return parent; diff --git a/arch/arm/mach-ux500/setup.h b/arch/arm/mach-ux500/setup.h index bddce2b49372..cad3ca86c540 100644 --- a/arch/arm/mach-ux500/setup.h +++ b/arch/arm/mach-ux500/setup.h @@ -18,7 +18,7 @@ void __init ux500_map_io(void); extern void __init u8500_map_io(void); -extern struct device * __init u8500_init_devices(struct ab8500_platform_data *ab8500); +extern struct device * __init u8500_init_devices(void); extern void __init ux500_init_irq(void); extern void __init ux500_init_late(void); -- cgit v1.2.3 From ea63a11027103372f56bd2d9ee3c525be6edc9c1 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Wed, 8 May 2013 14:29:05 +0100 Subject: ARM: ux500: Fix incorrect DEBUG UART virtual addresses A recent move to rid header files which were hindering multiplatform support forced address allocations out of the headers and into the files which were using them. We also lost some useful macros such as IO_ADDRESS(), so physical -> virtual addressing has been carried out manually in this case. Unfortunately the incorrect value was converted. This patch rectifies the error and ensures earlyprintk works again. Signed-off-by: Lee Jones Signed-off-by: Linus Walleij --- arch/arm/include/debug/ux500.S | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/arm/include/debug/ux500.S b/arch/arm/include/debug/ux500.S index 2848857f5b62..fbd24beeb1fa 100644 --- a/arch/arm/include/debug/ux500.S +++ b/arch/arm/include/debug/ux500.S @@ -24,9 +24,9 @@ #define U8500_UART0_PHYS_BASE (0x80120000) #define U8500_UART1_PHYS_BASE (0x80121000) #define U8500_UART2_PHYS_BASE (0x80007000) -#define U8500_UART0_VIRT_BASE (0xa8120000) -#define U8500_UART1_VIRT_BASE (0xa8121000) -#define U8500_UART2_VIRT_BASE (0xa8007000) +#define U8500_UART0_VIRT_BASE (0xf8120000) +#define U8500_UART1_VIRT_BASE (0xf8121000) +#define U8500_UART2_VIRT_BASE (0xf8007000) #define __UX500_PHYS_UART(n) U8500_UART##n##_PHYS_BASE #define __UX500_VIRT_UART(n) U8500_UART##n##_VIRT_BASE #endif -- cgit v1.2.3 From 7d2b64f9832d7cb971141703219b3dc495bb9332 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Wed, 8 May 2013 14:29:06 +0100 Subject: ARM: ux500: Provide device enumeration number suffix for SMSC911x First Ethernet device has a ".0" appended onto the device name. Since on a non-DT boot the ethernet will be named "smsc911x.0" and since the clocks are not converted to device tree these names need to be matched when providing the name from auxdata. Signed-off-by: Lee Jones [edited commit message] Signed-off-by: Linus Walleij --- arch/arm/mach-ux500/cpu-db8500.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c index 8894327283e1..46cca52890bc 100644 --- a/arch/arm/mach-ux500/cpu-db8500.c +++ b/arch/arm/mach-ux500/cpu-db8500.c @@ -276,7 +276,7 @@ static struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = { OF_DEV_AUXDATA("st,nomadik-i2c", 0x8012a000, "nmk-i2c.4", NULL), OF_DEV_AUXDATA("stericsson,db8500-prcmu", 0x80157000, "db8500-prcmu", &db8500_prcmu_pdata), - OF_DEV_AUXDATA("smsc,lan9115", 0x50000000, "smsc911x", NULL), + OF_DEV_AUXDATA("smsc,lan9115", 0x50000000, "smsc911x.0", NULL), /* Requires device name bindings. */ OF_DEV_AUXDATA("stericsson,nmk-pinctrl", U8500_PRCMU_BASE, "pinctrl-db8500", NULL), -- cgit v1.2.3 From 9349d00fc3ff2b110dc07d9f5d06abfeac300c19 Mon Sep 17 00:00:00 2001 From: Jean-Christophe PLAGNIOL-VILLARD Date: Tue, 7 May 2013 22:06:57 +0200 Subject: ARM: at91/trivial: fix model name for SAM9X25-EK Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD Signed-off-by: Nicolas Ferre Cc: stable # 3.8+ --- arch/arm/boot/dts/at91sam9x25ek.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/at91sam9x25ek.dts b/arch/arm/boot/dts/at91sam9x25ek.dts index 3b40d11d65e7..315250b4995e 100644 --- a/arch/arm/boot/dts/at91sam9x25ek.dts +++ b/arch/arm/boot/dts/at91sam9x25ek.dts @@ -11,7 +11,7 @@ /include/ "at91sam9x5ek.dtsi" / { - model = "Atmel AT91SAM9G25-EK"; + model = "Atmel AT91SAM9X25-EK"; compatible = "atmel,at91sam9x25ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9"; ahb { -- cgit v1.2.3 From 5ade7e4214b43e9b934202d892e3d7c131617908 Mon Sep 17 00:00:00 2001 From: Nicolas Ferre Date: Tue, 14 May 2013 15:14:49 +0200 Subject: ARM: at91/trivial: typo in GEM compatible string Signed-off-by: Nicolas Ferre --- Documentation/devicetree/bindings/net/macb.txt | 2 +- arch/arm/boot/dts/sama5d3.dtsi | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/Documentation/devicetree/bindings/net/macb.txt b/Documentation/devicetree/bindings/net/macb.txt index 44afa0e5057d..4ff65047bb9a 100644 --- a/Documentation/devicetree/bindings/net/macb.txt +++ b/Documentation/devicetree/bindings/net/macb.txt @@ -4,7 +4,7 @@ Required properties: - compatible: Should be "cdns,[-]{macb|gem}" Use "cdns,at91sam9260-macb" Atmel at91sam9260 and at91sam9263 SoCs. Use "cdns,at32ap7000-macb" for other 10/100 usage or use the generic form: "cdns,macb". - Use "cnds,pc302-gem" for Picochip picoXcell pc302 and later devices based on + Use "cdns,pc302-gem" for Picochip picoXcell pc302 and later devices based on the Cadence GEM, or the generic form: "cdns,gem". - reg: Address and length of the register set for the device - interrupts: Should contain macb interrupt diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi index 2e643ea51cce..5fce96b1cee4 100644 --- a/arch/arm/boot/dts/sama5d3.dtsi +++ b/arch/arm/boot/dts/sama5d3.dtsi @@ -156,7 +156,7 @@ }; macb0: ethernet@f0028000 { - compatible = "cnds,pc302-gem", "cdns,gem"; + compatible = "cdns,pc302-gem", "cdns,gem"; reg = <0xf0028000 0x100>; interrupts = <34 4 3>; pinctrl-names = "default"; -- cgit v1.2.3 From 3f81127293284da449942a0144b9747c5db1e523 Mon Sep 17 00:00:00 2001 From: Ludovic Desroches Date: Wed, 24 Apr 2013 15:56:48 +0200 Subject: ARM: at91: dts: request only spi cs-gpios used on sama5d3x cpu module Instead of requesting all available spi cs-gpios, request only the ones used on the board, in our case on the cpu module. Signed-off-by: Ludovic Desroches Acked-by: Jean-Christophe PLAGNIOL-VILLARD Signed-off-by: Nicolas Ferre --- arch/arm/boot/dts/sama5d3.dtsi | 10 ---------- arch/arm/boot/dts/sama5d3xcm.dtsi | 4 ++++ 2 files changed, 4 insertions(+), 10 deletions(-) diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi index 5fce96b1cee4..5000e0d42849 100644 --- a/arch/arm/boot/dts/sama5d3.dtsi +++ b/arch/arm/boot/dts/sama5d3.dtsi @@ -75,11 +75,6 @@ compatible = "atmel,at91sam9x5-spi"; reg = <0xf0004000 0x100>; interrupts = <24 4 3>; - cs-gpios = <&pioD 13 0 - &pioD 14 0 /* conflicts with SCK0 and CANRX0 */ - &pioD 15 0 /* conflicts with CTS0 and CANTX0 */ - &pioD 16 0 /* conflicts with RTS0 and PWMFI3 */ - >; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi0>; status = "disabled"; @@ -203,11 +198,6 @@ compatible = "atmel,at91sam9x5-spi"; reg = <0xf8008000 0x100>; interrupts = <25 4 3>; - cs-gpios = <&pioC 25 0 - &pioC 26 0 /* conflitcs with TWD1 and ISI_D11 */ - &pioC 27 0 /* conflitcs with TWCK1 and ISI_D10 */ - &pioC 28 0 /* conflitcs with PWMFI0 and ISI_D9 */ - >; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi1>; status = "disabled"; diff --git a/arch/arm/boot/dts/sama5d3xcm.dtsi b/arch/arm/boot/dts/sama5d3xcm.dtsi index 1f8ed404626c..b336e7787cb3 100644 --- a/arch/arm/boot/dts/sama5d3xcm.dtsi +++ b/arch/arm/boot/dts/sama5d3xcm.dtsi @@ -32,6 +32,10 @@ ahb { apb { + spi0: spi@f0004000 { + cs-gpios = <&pioD 13 0>, <0>, <0>, <0>; + }; + macb0: ethernet@f0028000 { phy-mode = "rgmii"; }; -- cgit v1.2.3 From d6cbf35dac8a3dadb9103379820c96d7c85df3d9 Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Tue, 14 May 2013 19:44:20 +0800 Subject: cgroup: initialize xattr before calling d_instantiate() cgroup_create_file() calls d_instantiate(), which may decide to look at the xattrs on the file. Smack always does this and SELinux can be configured to do so. But cgroup_add_file() didn't initialize xattrs before calling cgroup_create_file(), which finally leads to dereferencing NULL dentry->d_fsdata. This bug has been there since cgroup xattr was introduced. Cc: # 3.8.x Reported-by: Ivan Bulatovic Reported-by: Casey Schaufler Signed-off-by: Li Zefan Signed-off-by: Tejun Heo --- kernel/cgroup.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/kernel/cgroup.c b/kernel/cgroup.c index 2a9926275f80..38b136553044 100644 --- a/kernel/cgroup.c +++ b/kernel/cgroup.c @@ -2699,13 +2699,14 @@ static int cgroup_add_file(struct cgroup *cgrp, struct cgroup_subsys *subsys, goto out; } + cfe->type = (void *)cft; + cfe->dentry = dentry; + dentry->d_fsdata = cfe; + simple_xattrs_init(&cfe->xattrs); + mode = cgroup_file_mode(cft); error = cgroup_create_file(dentry, mode | S_IFREG, cgrp->root->sb); if (!error) { - cfe->type = (void *)cft; - cfe->dentry = dentry; - dentry->d_fsdata = cfe; - simple_xattrs_init(&cfe->xattrs); list_add_tail(&cfe->node, &parent->files); cfe = NULL; } -- cgit v1.2.3 From de82b923012ff8790bcfff381eb3ca9069d00f49 Mon Sep 17 00:00:00 2001 From: Brian Foster Date: Tue, 14 May 2013 11:25:39 -0400 Subject: fuse: allocate for_background dio requests based on io->async state Commit 8b41e671 introduced explicit background checking for fuse_req structures with BUG_ON() checks for the appropriate type of request in in the associated send functions. Commit bcba24cc introduced the ability to send dio requests as background requests but does not update the request allocation based on the type of I/O request. As a result, a BUG_ON() triggers in the fuse_request_send_background() background path if an async I/O is sent. Allocate a request based on the async state of the fuse_io_priv to avoid the BUG. Signed-off-by: Brian Foster Signed-off-by: Miklos Szeredi --- fs/fuse/file.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) diff --git a/fs/fuse/file.c b/fs/fuse/file.c index d1c9b85b3f58..fe191325fefa 100644 --- a/fs/fuse/file.c +++ b/fs/fuse/file.c @@ -1278,7 +1278,10 @@ ssize_t fuse_direct_io(struct fuse_io_priv *io, const struct iovec *iov, iov_iter_init(&ii, iov, nr_segs, count, 0); - req = fuse_get_req(fc, fuse_iter_npages(&ii)); + if (io->async) + req = fuse_get_req_for_background(fc, fuse_iter_npages(&ii)); + else + req = fuse_get_req(fc, fuse_iter_npages(&ii)); if (IS_ERR(req)) return PTR_ERR(req); @@ -1314,7 +1317,11 @@ ssize_t fuse_direct_io(struct fuse_io_priv *io, const struct iovec *iov, break; if (count) { fuse_put_request(fc, req); - req = fuse_get_req(fc, fuse_iter_npages(&ii)); + if (io->async) + req = fuse_get_req_for_background(fc, + fuse_iter_npages(&ii)); + else + req = fuse_get_req(fc, fuse_iter_npages(&ii)); if (IS_ERR(req)) break; } -- cgit v1.2.3 From 8c3d3d4b12bf8de8c59fe1eb1bf866a8676ca309 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 14 May 2013 11:09:50 -0700 Subject: libata: update "Maintained by:" tags Jeff moved on to a greener pasture. s/Maintained by: Jeff Garzik/Maintained by: Tejun Heo/g Signed-off-by: Tejun Heo Cc: Jeff Garzik --- drivers/ata/acard-ahci.c | 2 +- drivers/ata/ahci.c | 2 +- drivers/ata/ahci.h | 2 +- drivers/ata/ata_piix.c | 2 +- drivers/ata/libahci.c | 2 +- drivers/ata/libata-core.c | 2 +- drivers/ata/libata-eh.c | 2 +- drivers/ata/libata-scsi.c | 2 +- drivers/ata/libata-sff.c | 2 +- drivers/ata/pdc_adma.c | 2 +- drivers/ata/sata_promise.c | 2 +- drivers/ata/sata_sil.c | 2 +- drivers/ata/sata_sx4.c | 2 +- drivers/ata/sata_via.c | 2 +- 14 files changed, 14 insertions(+), 14 deletions(-) diff --git a/drivers/ata/acard-ahci.c b/drivers/ata/acard-ahci.c index 4e94ba29cb8d..9d0cf019ce59 100644 --- a/drivers/ata/acard-ahci.c +++ b/drivers/ata/acard-ahci.c @@ -2,7 +2,7 @@ /* * acard-ahci.c - ACard AHCI SATA support * - * Maintained by: Jeff Garzik + * Maintained by: Tejun Heo * Please ALWAYS copy linux-ide@vger.kernel.org * on emails. * diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index 251e57d38942..21808766140a 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -1,7 +1,7 @@ /* * ahci.c - AHCI SATA support * - * Maintained by: Jeff Garzik + * Maintained by: Tejun Heo * Please ALWAYS copy linux-ide@vger.kernel.org * on emails. * diff --git a/drivers/ata/ahci.h b/drivers/ata/ahci.h index b830e6c9fe49..10b14d45cfd2 100644 --- a/drivers/ata/ahci.h +++ b/drivers/ata/ahci.h @@ -1,7 +1,7 @@ /* * ahci.h - Common AHCI SATA definitions and declarations * - * Maintained by: Jeff Garzik + * Maintained by: Tejun Heo * Please ALWAYS copy linux-ide@vger.kernel.org * on emails. * diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c index 2f48123d74c4..26bda6ed9a00 100644 --- a/drivers/ata/ata_piix.c +++ b/drivers/ata/ata_piix.c @@ -1,7 +1,7 @@ /* * ata_piix.c - Intel PATA/SATA controllers * - * Maintained by: Jeff Garzik + * Maintained by: Tejun Heo * Please ALWAYS copy linux-ide@vger.kernel.org * on emails. * diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c index 34c82167b962..a70ff154f586 100644 --- a/drivers/ata/libahci.c +++ b/drivers/ata/libahci.c @@ -1,7 +1,7 @@ /* * libahci.c - Common AHCI SATA low-level routines * - * Maintained by: Jeff Garzik + * Maintained by: Tejun Heo * Please ALWAYS copy linux-ide@vger.kernel.org * on emails. * diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 63c743baf920..d35524c33905 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -1,7 +1,7 @@ /* * libata-core.c - helper library for ATA * - * Maintained by: Jeff Garzik + * Maintained by: Tejun Heo * Please ALWAYS copy linux-ide@vger.kernel.org * on emails. * diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c index f9476fb3ac43..c69fcce505c0 100644 --- a/drivers/ata/libata-eh.c +++ b/drivers/ata/libata-eh.c @@ -1,7 +1,7 @@ /* * libata-eh.c - libata error handling * - * Maintained by: Jeff Garzik + * Maintained by: Tejun Heo * Please ALWAYS copy linux-ide@vger.kernel.org * on emails. * diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index dd310b27b24c..0101af541436 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -1,7 +1,7 @@ /* * libata-scsi.c - helper library for ATA * - * Maintained by: Jeff Garzik + * Maintained by: Tejun Heo * Please ALWAYS copy linux-ide@vger.kernel.org * on emails. * diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c index d8af325a6bda..b603720b877d 100644 --- a/drivers/ata/libata-sff.c +++ b/drivers/ata/libata-sff.c @@ -1,7 +1,7 @@ /* * libata-sff.c - helper library for PCI IDE BMDMA * - * Maintained by: Jeff Garzik + * Maintained by: Tejun Heo * Please ALWAYS copy linux-ide@vger.kernel.org * on emails. * diff --git a/drivers/ata/pdc_adma.c b/drivers/ata/pdc_adma.c index 505333340ad5..8ea6e6afd041 100644 --- a/drivers/ata/pdc_adma.c +++ b/drivers/ata/pdc_adma.c @@ -1,7 +1,7 @@ /* * pdc_adma.c - Pacific Digital Corporation ADMA * - * Maintained by: Mark Lord + * Maintained by: Tejun Heo * * Copyright 2005 Mark Lord * diff --git a/drivers/ata/sata_promise.c b/drivers/ata/sata_promise.c index fb0dd87f8893..958ba2a420c3 100644 --- a/drivers/ata/sata_promise.c +++ b/drivers/ata/sata_promise.c @@ -1,7 +1,7 @@ /* * sata_promise.c - Promise SATA * - * Maintained by: Jeff Garzik + * Maintained by: Tejun Heo * Mikael Pettersson * Please ALWAYS copy linux-ide@vger.kernel.org * on emails. diff --git a/drivers/ata/sata_sil.c b/drivers/ata/sata_sil.c index a7b31672c4b7..0ae3ca4bf5c0 100644 --- a/drivers/ata/sata_sil.c +++ b/drivers/ata/sata_sil.c @@ -1,7 +1,7 @@ /* * sata_sil.c - Silicon Image SATA * - * Maintained by: Jeff Garzik + * Maintained by: Tejun Heo * Please ALWAYS copy linux-ide@vger.kernel.org * on emails. * diff --git a/drivers/ata/sata_sx4.c b/drivers/ata/sata_sx4.c index 7b7127a58f51..9947010afc0f 100644 --- a/drivers/ata/sata_sx4.c +++ b/drivers/ata/sata_sx4.c @@ -1,7 +1,7 @@ /* * sata_sx4.c - Promise SATA * - * Maintained by: Jeff Garzik + * Maintained by: Tejun Heo * Please ALWAYS copy linux-ide@vger.kernel.org * on emails. * diff --git a/drivers/ata/sata_via.c b/drivers/ata/sata_via.c index 5913ea9d57b2..87f056e54a9d 100644 --- a/drivers/ata/sata_via.c +++ b/drivers/ata/sata_via.c @@ -1,7 +1,7 @@ /* * sata_via.c - VIA Serial ATA controllers * - * Maintained by: Jeff Garzik + * Maintained by: Tejun Heo * Please ALWAYS copy linux-ide@vger.kernel.org * on emails. * -- cgit v1.2.3 From 7d19273cd0408f8520539d5d6b1f695cd311b109 Mon Sep 17 00:00:00 2001 From: Christian Ruppert Date: Fri, 10 May 2013 16:05:50 +0200 Subject: ARC: [TB10x] Remove redundant abilis,simple-pinctrl mechanism The TB10x platform port includes a custom mechanism using to set up default pin controller configurations using abilis,simple-default pin configurations of nodes compatible with abilis,simple-pinctrl. This mechanism is redundant with the Linux standard "default" pin configuration, see commit ab78029ecc347debbd737f06688d788bd9d60c1d "drivers/pinctrl: grab default handles from device core". This patch removes the TB10x custom mechanism in favour of the Linux standard. Signed-off-by: Christian Ruppert Reviewed-by: Stephen Warren Reviewed-by: Linus Walleij Signed-off-by: Vineet Gupta --- arch/arc/boot/dts/abilis_tb100_dvk.dts | 2 +- arch/arc/boot/dts/abilis_tb101_dvk.dts | 2 +- arch/arc/boot/dts/abilis_tb10x.dtsi | 6 ++---- arch/arc/plat-tb10x/tb10x.c | 26 -------------------------- 4 files changed, 4 insertions(+), 32 deletions(-) diff --git a/arch/arc/boot/dts/abilis_tb100_dvk.dts b/arch/arc/boot/dts/abilis_tb100_dvk.dts index c0fd3623c393..0fa0d4abe795 100644 --- a/arch/arc/boot/dts/abilis_tb100_dvk.dts +++ b/arch/arc/boot/dts/abilis_tb100_dvk.dts @@ -37,7 +37,7 @@ soc100 { uart@FF100000 { - pinctrl-names = "abilis,simple-default"; + pinctrl-names = "default"; pinctrl-0 = <&pctl_uart0>; }; ethernet@FE100000 { diff --git a/arch/arc/boot/dts/abilis_tb101_dvk.dts b/arch/arc/boot/dts/abilis_tb101_dvk.dts index 6f8c381f6268..a4d80ce283ae 100644 --- a/arch/arc/boot/dts/abilis_tb101_dvk.dts +++ b/arch/arc/boot/dts/abilis_tb101_dvk.dts @@ -37,7 +37,7 @@ soc100 { uart@FF100000 { - pinctrl-names = "abilis,simple-default"; + pinctrl-names = "default"; pinctrl-0 = <&pctl_uart0>; }; ethernet@FE100000 { diff --git a/arch/arc/boot/dts/abilis_tb10x.dtsi b/arch/arc/boot/dts/abilis_tb10x.dtsi index a6139fc5aaa3..b97e3051ba4b 100644 --- a/arch/arc/boot/dts/abilis_tb10x.dtsi +++ b/arch/arc/boot/dts/abilis_tb10x.dtsi @@ -88,8 +88,7 @@ }; uart@FF100000 { - compatible = "snps,dw-apb-uart", - "abilis,simple-pinctrl"; + compatible = "snps,dw-apb-uart"; reg = <0xFF100000 0x100>; clock-frequency = <166666666>; interrupts = <25 1>; @@ -184,8 +183,7 @@ #address-cells = <1>; #size-cells = <0>; cell-index = <1>; - compatible = "abilis,tb100-spi", - "abilis,simple-pinctrl"; + compatible = "abilis,tb100-spi"; num-cs = <2>; reg = <0xFE011000 0x20>; interrupt-parent = <&tb10x_ictl>; diff --git a/arch/arc/plat-tb10x/tb10x.c b/arch/arc/plat-tb10x/tb10x.c index d3567691c7e1..06cb30929460 100644 --- a/arch/arc/plat-tb10x/tb10x.c +++ b/arch/arc/plat-tb10x/tb10x.c @@ -34,31 +34,6 @@ static void __init tb10x_platform_init(void) of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); } -static void __init tb10x_platform_late_init(void) -{ - struct device_node *dn; - - /* - * Pinctrl documentation recommends setting up the iomux here for - * all modules which don't require control over the pins themselves. - * Modules which need this kind of assistance are compatible with - * "abilis,simple-pinctrl", i.e. we can easily iterate over them. - * TODO: Does this recommended method work cleanly with pins required - * by modules? - */ - for_each_compatible_node(dn, NULL, "abilis,simple-pinctrl") { - struct platform_device *pd = of_find_device_by_node(dn); - struct pinctrl *pctl; - - pctl = pinctrl_get_select(&pd->dev, "abilis,simple-default"); - if (IS_ERR(pctl)) { - int ret = PTR_ERR(pctl); - dev_err(&pd->dev, "Could not set up pinctrl: %d\n", - ret); - } - } -} - static const char *tb10x_compat[] __initdata = { "abilis,arc-tb10x", NULL, @@ -67,5 +42,4 @@ static const char *tb10x_compat[] __initdata = { MACHINE_START(TB10x, "tb10x") .dt_compat = tb10x_compat, .init_machine = tb10x_platform_init, - .init_late = tb10x_platform_late_init, MACHINE_END -- cgit v1.2.3 From 19a280a61b520febab0f2fde94f4bd50250377b2 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Sun, 12 May 2013 15:06:51 +0200 Subject: ARM: sunxi: select ARCH_REQUIRE_GPIOLIB MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit CONFIG_ARCH_SUNXI currently doesn't enable a gpiolib, which causes build problems when building a kernel with only the sunxi platform enabled. Select ARCH_REQUIRE_GPIOLIB to solve this. Signed-off-by: Maxime Ripard Tested-by: Emilio López --- arch/arm/mach-sunxi/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig index d259c782d742..5b045e302b43 100644 --- a/arch/arm/mach-sunxi/Kconfig +++ b/arch/arm/mach-sunxi/Kconfig @@ -1,5 +1,6 @@ config ARCH_SUNXI bool "Allwinner A1X SOCs" if ARCH_MULTI_V7 + select ARCH_REQUIRE_GPIOLIB select CLKSRC_MMIO select CLKSRC_OF select COMMON_CLK -- cgit v1.2.3 From b7a8ca5173ef9aa55fa039d7c216426ff0b25a12 Mon Sep 17 00:00:00 2001 From: Jean-Christophe PLAGNIOL-VILLARD Date: Wed, 15 May 2013 12:12:33 +0200 Subject: ARM: at91: rm9200 fix time support since commit 838a2ae80a6ab52139fb1bf0a93ea8c5eff94488 Author: Shawn Guo Date: Sat Jan 12 11:50:05 2013 +0000 ARM: use clockevents_config_and_register() where possible The timer is wrongly configured and result in a nice crash so revert it on rm9200 timer. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD Cc: stable # 3.8+ Cc: Shawn Guo Signed-off-by: Nicolas Ferre --- arch/arm/mach-at91/at91rm9200_time.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-at91/at91rm9200_time.c b/arch/arm/mach-at91/at91rm9200_time.c index 2acdff4c1dfe..180b3024bec3 100644 --- a/arch/arm/mach-at91/at91rm9200_time.c +++ b/arch/arm/mach-at91/at91rm9200_time.c @@ -174,6 +174,7 @@ clkevt32k_next_event(unsigned long delta, struct clock_event_device *dev) static struct clock_event_device clkevt = { .name = "at91_tick", .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, + .shift = 32, .rating = 150, .set_next_event = clkevt32k_next_event, .set_mode = clkevt32k_mode, @@ -264,9 +265,11 @@ void __init at91rm9200_timer_init(void) at91_st_write(AT91_ST_RTMR, 1); /* Setup timer clockevent, with minimum of two ticks (important!!) */ + clkevt.mult = div_sc(AT91_SLOW_CLOCK, NSEC_PER_SEC, clkevt.shift); + clkevt.max_delta_ns = clockevent_delta2ns(AT91_ST_ALMV, &clkevt); + clkevt.min_delta_ns = clockevent_delta2ns(2, &clkevt) + 1; clkevt.cpumask = cpumask_of(0); - clockevents_config_and_register(&clkevt, AT91_SLOW_CLOCK, - 2, AT91_ST_ALMV); + clockevents_register_device(&clkevt); /* register clocksource */ clocksource_register_hz(&clk32k, AT91_SLOW_CLOCK); -- cgit v1.2.3 From 74ba4ec7a2036f9dbe5fcc85c7c737222005507f Mon Sep 17 00:00:00 2001 From: Emilio López Date: Wed, 15 May 2013 09:36:41 -0300 Subject: ARM: ux500: select REGULATOR MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit MACH_MOP500 selects REGULATOR_FIXED_VOLTAGE but not REGULATOR. This patch makes it select the latter too. Seen as: warning: (MACH_DOVE_DT && ARCH_KIRKWOOD_DT && MACH_AMS_DELTA && MACH_MOP500 && TPS6105X) selects REGULATOR_FIXED_VOLTAGE which has unmet direct dependencies (REGULATOR) Signed-off-by: Emilio López Signed-off-by: Linus Walleij --- arch/arm/mach-ux500/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig index 6a4387e39df8..b19b07204aaf 100644 --- a/arch/arm/mach-ux500/Kconfig +++ b/arch/arm/mach-ux500/Kconfig @@ -51,6 +51,7 @@ config MACH_MOP500 bool "U8500 Development platform, MOP500 versions" select I2C select I2C_NOMADIK + select REGULATOR select REGULATOR_FIXED_VOLTAGE select SOC_BUS select UX500_SOC_DB8500 -- cgit v1.2.3 From d36ccb9cec22a09a12d9ef8234d634f840d7ae4b Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Wed, 15 May 2013 10:46:33 -0700 Subject: SUNRPC: Fix a bug in gss_create_upcall If wait_event_interruptible_timeout() is successful, it returns the number of seconds remaining until the timeout. In that case, we should be retrying the upcall. Signed-off-by: Trond Myklebust --- net/sunrpc/auth_gss/auth_gss.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/net/sunrpc/auth_gss/auth_gss.c b/net/sunrpc/auth_gss/auth_gss.c index 7da6b457f66a..f17f3c581ff4 100644 --- a/net/sunrpc/auth_gss/auth_gss.c +++ b/net/sunrpc/auth_gss/auth_gss.c @@ -563,11 +563,12 @@ gss_create_upcall(struct gss_auth *gss_auth, struct gss_cred *gss_cred) struct rpc_cred *cred = &gss_cred->gc_base; struct gss_upcall_msg *gss_msg; DEFINE_WAIT(wait); - int err = 0; + int err; dprintk("RPC: %s for uid %u\n", __func__, from_kuid(&init_user_ns, cred->cr_uid)); retry: + err = 0; gss_msg = gss_setup_upcall(gss_auth->client, gss_auth, cred); if (PTR_ERR(gss_msg) == -EAGAIN) { err = wait_event_interruptible_timeout(pipe_version_waitqueue, @@ -576,7 +577,7 @@ retry: warn_gssd(); err = -EACCES; } - if (err) + if (err < 0) goto out; goto retry; } -- cgit v1.2.3 From abfdbd53a4e28844ad953b313f017f55edbb85b7 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Wed, 15 May 2013 11:28:54 -0700 Subject: SUNRPC: Faster detection if gssd is actually running Recent changes to the NFS security flavour negotiation mean that we have a stronger dependency on rpc.gssd. If the latter is not running, because the user failed to start it, then we time out and mark the container as not having an instance. We then use that information to time out faster the next time. If, on the other hand, the rpc.gssd successfully binds to an rpc_pipe, then we mark the container as having an rpc.gssd instance. Signed-off-by: Trond Myklebust --- net/sunrpc/auth_gss/auth_gss.c | 13 ++++++++++++- net/sunrpc/netns.h | 2 ++ net/sunrpc/rpc_pipe.c | 4 ++++ 3 files changed, 18 insertions(+), 1 deletion(-) diff --git a/net/sunrpc/auth_gss/auth_gss.c b/net/sunrpc/auth_gss/auth_gss.c index f17f3c581ff4..3aff72f78bf2 100644 --- a/net/sunrpc/auth_gss/auth_gss.c +++ b/net/sunrpc/auth_gss/auth_gss.c @@ -52,6 +52,8 @@ #include #include +#include "../netns.h" + static const struct rpc_authops authgss_ops; static const struct rpc_credops gss_credops; @@ -559,9 +561,12 @@ out: static inline int gss_create_upcall(struct gss_auth *gss_auth, struct gss_cred *gss_cred) { + struct net *net = rpc_net_ns(gss_auth->client); + struct sunrpc_net *sn = net_generic(net, sunrpc_net_id); struct rpc_pipe *pipe; struct rpc_cred *cred = &gss_cred->gc_base; struct gss_upcall_msg *gss_msg; + unsigned long timeout; DEFINE_WAIT(wait); int err; @@ -569,11 +574,17 @@ gss_create_upcall(struct gss_auth *gss_auth, struct gss_cred *gss_cred) __func__, from_kuid(&init_user_ns, cred->cr_uid)); retry: err = 0; + /* Default timeout is 15s unless we know that gssd is not running */ + timeout = 15 * HZ; + if (!sn->gssd_running) + timeout = HZ >> 2; gss_msg = gss_setup_upcall(gss_auth->client, gss_auth, cred); if (PTR_ERR(gss_msg) == -EAGAIN) { err = wait_event_interruptible_timeout(pipe_version_waitqueue, - pipe_version >= 0, 15*HZ); + pipe_version >= 0, timeout); if (pipe_version < 0) { + if (err == 0) + sn->gssd_running = 0; warn_gssd(); err = -EACCES; } diff --git a/net/sunrpc/netns.h b/net/sunrpc/netns.h index 7111a4c9113b..0827f641e8d7 100644 --- a/net/sunrpc/netns.h +++ b/net/sunrpc/netns.h @@ -29,6 +29,8 @@ struct sunrpc_net { struct rpc_clnt *gssp_clnt; int use_gss_proxy; struct proc_dir_entry *use_gssp_proc; + + unsigned int gssd_running; }; extern int sunrpc_net_id; diff --git a/net/sunrpc/rpc_pipe.c b/net/sunrpc/rpc_pipe.c index a9129f8d7070..a370762e459d 100644 --- a/net/sunrpc/rpc_pipe.c +++ b/net/sunrpc/rpc_pipe.c @@ -216,11 +216,14 @@ rpc_destroy_inode(struct inode *inode) static int rpc_pipe_open(struct inode *inode, struct file *filp) { + struct net *net = inode->i_sb->s_fs_info; + struct sunrpc_net *sn = net_generic(net, sunrpc_net_id); struct rpc_pipe *pipe; int first_open; int res = -ENXIO; mutex_lock(&inode->i_mutex); + sn->gssd_running = 1; pipe = RPC_I(inode)->pipe; if (pipe == NULL) goto out; @@ -1069,6 +1072,7 @@ void rpc_pipefs_init_net(struct net *net) struct sunrpc_net *sn = net_generic(net, sunrpc_net_id); mutex_init(&sn->pipefs_sb_lock); + sn->gssd_running = 1; } /* -- cgit v1.2.3 From 2aed8b476f3478be140df92bbfb182978e835504 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Wed, 15 May 2013 10:27:32 -0700 Subject: SUNRPC: Convert auth_gss pipe detection to work in namespaces This seems to have been overlooked when we did the namespace conversion. If a container is running a legacy version of rpc.gssd then it will be disrupted if the global 'pipe_version' is set by a container running the new version of rpc.gssd. Signed-off-by: Trond Myklebust --- net/sunrpc/auth_gss/auth_gss.c | 46 +++++++++++++++++++++++++----------------- net/sunrpc/netns.h | 2 ++ net/sunrpc/rpc_pipe.c | 1 + 3 files changed, 30 insertions(+), 19 deletions(-) diff --git a/net/sunrpc/auth_gss/auth_gss.c b/net/sunrpc/auth_gss/auth_gss.c index 3aff72f78bf2..fc2f78d6a9b4 100644 --- a/net/sunrpc/auth_gss/auth_gss.c +++ b/net/sunrpc/auth_gss/auth_gss.c @@ -87,8 +87,6 @@ struct gss_auth { }; /* pipe_version >= 0 if and only if someone has a pipe open. */ -static int pipe_version = -1; -static atomic_t pipe_users = ATOMIC_INIT(0); static DEFINE_SPINLOCK(pipe_version_lock); static struct rpc_wait_queue pipe_version_rpc_waitqueue; static DECLARE_WAIT_QUEUE_HEAD(pipe_version_waitqueue); @@ -268,24 +266,27 @@ struct gss_upcall_msg { char databuf[UPCALL_BUF_LEN]; }; -static int get_pipe_version(void) +static int get_pipe_version(struct net *net) { + struct sunrpc_net *sn = net_generic(net, sunrpc_net_id); int ret; spin_lock(&pipe_version_lock); - if (pipe_version >= 0) { - atomic_inc(&pipe_users); - ret = pipe_version; + if (sn->pipe_version >= 0) { + atomic_inc(&sn->pipe_users); + ret = sn->pipe_version; } else ret = -EAGAIN; spin_unlock(&pipe_version_lock); return ret; } -static void put_pipe_version(void) +static void put_pipe_version(struct net *net) { - if (atomic_dec_and_lock(&pipe_users, &pipe_version_lock)) { - pipe_version = -1; + struct sunrpc_net *sn = net_generic(net, sunrpc_net_id); + + if (atomic_dec_and_lock(&sn->pipe_users, &pipe_version_lock)) { + sn->pipe_version = -1; spin_unlock(&pipe_version_lock); } } @@ -293,9 +294,10 @@ static void put_pipe_version(void) static void gss_release_msg(struct gss_upcall_msg *gss_msg) { + struct net *net = rpc_net_ns(gss_msg->auth->client); if (!atomic_dec_and_test(&gss_msg->count)) return; - put_pipe_version(); + put_pipe_version(net); BUG_ON(!list_empty(&gss_msg->list)); if (gss_msg->ctx != NULL) gss_put_ctx(gss_msg->ctx); @@ -441,7 +443,10 @@ static void gss_encode_msg(struct gss_upcall_msg *gss_msg, struct rpc_clnt *clnt, const char *service_name) { - if (pipe_version == 0) + struct net *net = rpc_net_ns(clnt); + struct sunrpc_net *sn = net_generic(net, sunrpc_net_id); + + if (sn->pipe_version == 0) gss_encode_v0_msg(gss_msg); else /* pipe_version == 1 */ gss_encode_v1_msg(gss_msg, clnt, service_name); @@ -457,7 +462,7 @@ gss_alloc_msg(struct gss_auth *gss_auth, struct rpc_clnt *clnt, gss_msg = kzalloc(sizeof(*gss_msg), GFP_NOFS); if (gss_msg == NULL) return ERR_PTR(-ENOMEM); - vers = get_pipe_version(); + vers = get_pipe_version(rpc_net_ns(clnt)); if (vers < 0) { kfree(gss_msg); return ERR_PTR(vers); @@ -581,8 +586,8 @@ retry: gss_msg = gss_setup_upcall(gss_auth->client, gss_auth, cred); if (PTR_ERR(gss_msg) == -EAGAIN) { err = wait_event_interruptible_timeout(pipe_version_waitqueue, - pipe_version >= 0, timeout); - if (pipe_version < 0) { + sn->pipe_version >= 0, timeout); + if (sn->pipe_version < 0) { if (err == 0) sn->gssd_running = 0; warn_gssd(); @@ -719,20 +724,22 @@ out: static int gss_pipe_open(struct inode *inode, int new_version) { + struct net *net = inode->i_sb->s_fs_info; + struct sunrpc_net *sn = net_generic(net, sunrpc_net_id); int ret = 0; spin_lock(&pipe_version_lock); - if (pipe_version < 0) { + if (sn->pipe_version < 0) { /* First open of any gss pipe determines the version: */ - pipe_version = new_version; + sn->pipe_version = new_version; rpc_wake_up(&pipe_version_rpc_waitqueue); wake_up(&pipe_version_waitqueue); - } else if (pipe_version != new_version) { + } else if (sn->pipe_version != new_version) { /* Trying to open a pipe of a different version */ ret = -EBUSY; goto out; } - atomic_inc(&pipe_users); + atomic_inc(&sn->pipe_users); out: spin_unlock(&pipe_version_lock); return ret; @@ -752,6 +759,7 @@ static int gss_pipe_open_v1(struct inode *inode) static void gss_pipe_release(struct inode *inode) { + struct net *net = inode->i_sb->s_fs_info; struct rpc_pipe *pipe = RPC_I(inode)->pipe; struct gss_upcall_msg *gss_msg; @@ -770,7 +778,7 @@ restart: } spin_unlock(&pipe->lock); - put_pipe_version(); + put_pipe_version(net); } static void diff --git a/net/sunrpc/netns.h b/net/sunrpc/netns.h index 0827f641e8d7..74d948f5d5a1 100644 --- a/net/sunrpc/netns.h +++ b/net/sunrpc/netns.h @@ -28,6 +28,8 @@ struct sunrpc_net { wait_queue_head_t gssp_wq; struct rpc_clnt *gssp_clnt; int use_gss_proxy; + int pipe_version; + atomic_t pipe_users; struct proc_dir_entry *use_gssp_proc; unsigned int gssd_running; diff --git a/net/sunrpc/rpc_pipe.c b/net/sunrpc/rpc_pipe.c index a370762e459d..e7ce4b3eb0bd 100644 --- a/net/sunrpc/rpc_pipe.c +++ b/net/sunrpc/rpc_pipe.c @@ -1073,6 +1073,7 @@ void rpc_pipefs_init_net(struct net *net) mutex_init(&sn->pipefs_sb_lock); sn->gssd_running = 1; + sn->pipe_version = -1; } /* -- cgit v1.2.3 From 6ed0106667d76589cb648c27edb4f4ffbf9d59ca Mon Sep 17 00:00:00 2001 From: Masami Hiramatsu Date: Thu, 16 May 2013 20:48:49 +0900 Subject: tracing: Return -EBUSY when event_enable_func() fails to get module Since try_module_get() returns false( = 0) when it fails to pindown a module, event_enable_func() returns 0 which means "succeed". This can cause a kernel panic when the entry is removed, because the event is already released. This fixes the bug by returning -EBUSY, because the reason why it fails is that the module is being removed at that time. Link: http://lkml.kernel.org/r/20130516114848.13508.97899.stgit@mhiramat-M0-7522 Cc: Srikar Dronamraju Cc: Oleg Nesterov Cc: Tom Zanussi Cc: Frederic Weisbecker Cc: Ingo Molnar Signed-off-by: Masami Hiramatsu Signed-off-by: Steven Rostedt --- kernel/trace/trace_events.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/kernel/trace/trace_events.c b/kernel/trace/trace_events.c index 7a0cf68027cc..27963e2bf4bf 100644 --- a/kernel/trace/trace_events.c +++ b/kernel/trace/trace_events.c @@ -2072,8 +2072,10 @@ event_enable_func(struct ftrace_hash *hash, out_reg: /* Don't let event modules unload while probe registered */ ret = try_module_get(file->event_call->mod); - if (!ret) + if (!ret) { + ret = -EBUSY; goto out_free; + } ret = __ftrace_event_enable_disable(file, 1, 1); if (ret < 0) -- cgit v1.2.3 From 304e71e0ad4125c29a0731491b75c3b83530d616 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Tue, 14 May 2013 20:28:15 -0700 Subject: ARM: dts: Fix musb interrupt for device tree booting Commit ad871c10 (ARM: dts: OMAP: Add usb_otg and glue data to OMAP3+ boards) added support for MUSB on omap3 for device tree, but added the interrupts the wrong way probably as they were copied from the omap4.dtsi file. On omap3 we have TI specific interrupt controller, not GIC. Fix this by specifying the interrupt following the TI INTC binding. Without this fix MUSB won't work as it is trying to use irq0 instead of irq92. Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap3.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi index 82a404da1c0d..99ba6e14ebf3 100644 --- a/arch/arm/boot/dts/omap3.dtsi +++ b/arch/arm/boot/dts/omap3.dtsi @@ -516,7 +516,7 @@ usb_otg_hs: usb_otg_hs@480ab000 { compatible = "ti,omap3-musb"; reg = <0x480ab000 0x1000>; - interrupts = <0 92 0x4>, <0 93 0x4>; + interrupts = <92>, <93>; interrupt-names = "mc", "dma"; ti,hwmods = "usb_otg_hs"; multipoint = <1>; -- cgit v1.2.3 From fca8c90d519dedd4f4b19901d005c243f7f0bf2e Mon Sep 17 00:00:00 2001 From: "Chew, Chiau Ee" Date: Thu, 16 May 2013 15:33:29 +0800 Subject: ata_piix: add PCI IDs for Intel BayTail Adds IDE-mode SATA Device IDs for the Intel BayTrail platform. Signed-off-by: Chew, Chiau Ee Signed-off-by: Artem Bityutskiy Signed-off-by: Tejun Heo Cc: stable@vger.kernel.org --- drivers/ata/ata_piix.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c index 26bda6ed9a00..9a8a674e8fac 100644 --- a/drivers/ata/ata_piix.c +++ b/drivers/ata/ata_piix.c @@ -151,6 +151,7 @@ enum piix_controller_ids { piix_pata_vmw, /* PIIX4 for VMware, spurious DMA_ERR */ ich8_sata_snb, ich8_2port_sata_snb, + ich8_2port_sata_byt, }; struct piix_map_db { @@ -334,6 +335,9 @@ static const struct pci_device_id piix_pci_tbl[] = { { 0x8086, 0x8d60, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_snb }, /* SATA Controller IDE (Wellsburg) */ { 0x8086, 0x8d68, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata }, + /* SATA Controller IDE (BayTrail) */ + { 0x8086, 0x0F20, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata_byt }, + { 0x8086, 0x0F21, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata_byt }, { } /* terminate list */ }; @@ -441,6 +445,7 @@ static const struct piix_map_db *piix_map_db_table[] = { [tolapai_sata] = &tolapai_map_db, [ich8_sata_snb] = &ich8_map_db, [ich8_2port_sata_snb] = &ich8_2port_map_db, + [ich8_2port_sata_byt] = &ich8_2port_map_db, }; static struct pci_bits piix_enable_bits[] = { @@ -1254,6 +1259,16 @@ static struct ata_port_info piix_port_info[] = { .udma_mask = ATA_UDMA6, .port_ops = &piix_sata_ops, }, + + [ich8_2port_sata_byt] = + { + .flags = PIIX_SATA_FLAGS | PIIX_FLAG_SIDPR | PIIX_FLAG_PIO16, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA6, + .port_ops = &piix_sata_ops, + }, + }; #define AHCI_PCI_BAR 5 -- cgit v1.2.3 From 0f497039276fa2ca2ca324236848bb15c8c775dc Mon Sep 17 00:00:00 2001 From: jean-philippe francois Date: Thu, 16 May 2013 11:25:07 -0700 Subject: ARM: OMAP: fix __init section mismatch for _enable_preprogram _enable_preprogram is marked as __init, but is called from _enable which is not. Without this patch, the board oopses after init. Tested on custom hardware and on beagle board xM. Otherwise we can get: Unable to handle kernel paging request at virtual address 000b0012 pgd = cf968000 *pgd=8fb06831, *pte=00000000, *ppte=00000000 PREEMPT ARM Modules linked in: CPU: 0 Not tainted (3.9.0 #2) PC is at _enable_preprogram+0x1c/0x24 LR is at omap_hwmod_enable+0x34/0x60 psr: 80000093 sp : cf95de08 ip : 00002de5 fp : bec33d4c r10: 00000000 r9 : 00000002 r8 : b6dd2c78 r7 : 00000004 r6 : 00000000 r5 : a0000013 r4 : cf95c000 r3 : 00000000 r2 : b6dd2c7c r1 : 00000000 r0 : 000b0012 Flags: Nzcv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user Control: 10c5387d Table: 8f968019 DAC: 00000015 Process otpcmd (pid: 607, stack limit = 0xcf95c230) Stack: (0xcf95de08 to 0xcf95e000) de00: 00000001 cf91f840 00000000 c001d6fc 00000002 cf91f840 de20: cf8f7e10 c001de54 cf8f7e10 c001de78 c001de68 c01d5e80 00000000 cf8f7e10 de40: cf8f7e10 c01d5f28 cf8f7e10 c0530d30 00000000 c01d6f28 00000000 c0088664 de60: b6ea1000 cfb05284 cf95c000 00000001 cf95c000 60000013 00000001 cf95dee4 de80: cf870050 c01d7308 cf870010 cf870050 00000001 c0278b14 c0526f28 00000000 dea0: cf870050 ffff8e18 00000001 cf95dee4 00000000 c0274f7c cf870050 00000001 dec0: cf95dee4 cf1d8484 000000e0 c0276464 00000008 cf9c0000 00000007 c0276980 dee0: cf9c0000 00000064 00000008 cf1d8404 cf1d8400 c01cc05c 0000270a cf1d8504 df00: 00000023 cf1d8484 00000007 c01cc670 00000bdd 00000001 00000000 cf449e60 df20: cf1dde70 cf1d8400 bec33d18 cf1d8504 c0246f00 00000003 cf95c000 00000000 df40: bec33d4c c01cd078 00000003 cf1d8504 00000081 c01cbcb8 bec33d18 00000003 df60: bec33d18 c00a9034 00002000 c00a9c68 cf92fe00 00000003 c0246f00 cf92fe00 df80: 00000000 c00a9cb0 00000003 00000000 00008e70 00000000 b6f17000 00000036 dfa0: c000e484 c000e300 00008e70 00000000 00000003 c0246f00 bec33d18 bec33d18 dfc0: 00008e70 00000000 b6f17000 00000036 00000000 00000000 b6f6d000 bec33d4c dfe0: b6ea1bd0 bec33d0c 00008c9c b6ea1bdc 60000010 00000003 00000000 00000000 (_omap_device_enable_hwmods+0x20/0x34) (omap_device_enable+0x3c/0x50) (_od_runtime_resume+0x10/0x1c) (__rpm_callback+0x54/0x98) (rpm_callback+0x64/0x7c) (rpm_resume+0x434/0x554) (__pm_runtime_resume+0x48/0x74) (omap_i2c_xfer+0x28/0xe8) (__i2c_transfer+0x3c/0x78) (i2c_transfer+0x6c/0xc0) (i2c_master_send+0x38/0x48) (sha204p_send_command+0x60/0x9c) (sha204c_send_and_receive+0x5c/0x1e0) (sha204m_read+0x94/0xa0) (otp_do_read+0x50/0xa4) (vfs_ioctl+0x24/0x40) (do_vfs_ioctl+0x1b0/0x1c0) (sys_ioctl+0x38/0x54) (ret_fast_syscall+0x0/0x30) Code: e1a08002 ea000009 e598003c e592c05c (e7904003) Cc: stable@vger.kernel.org Signed-off-by: Jean-Philippe Fran=C3=A7ois Acked-by: Kevin Hilman [tony@atomide.com: updated description with oops] Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/omap_hwmod.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index d25a95fe9921..e3289888adfa 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -2065,7 +2065,7 @@ static int _omap4_get_context_lost(struct omap_hwmod *oh) * do so is present in the hwmod data, then call it and pass along the * return value; otherwise, return 0. */ -static int __init _enable_preprogram(struct omap_hwmod *oh) +static int _enable_preprogram(struct omap_hwmod *oh) { if (!oh->class->enable_preprogram) return 0; -- cgit v1.2.3 From a8b09c52a66e801d87704cfebf57958b1991ab86 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Thu, 16 May 2013 11:25:07 -0700 Subject: ARM: OMAP: fix error return code in omap1_system_dma_init() Fix to return -ENOMEM in the d->chan alloc error handling case instead of 0, as done elsewhere in this function. Signed-off-by: Wei Yongjun Signed-off-by: Tony Lindgren --- arch/arm/mach-omap1/dma.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/mach-omap1/dma.c b/arch/arm/mach-omap1/dma.c index 68ab858e27b7..a94b3a718d1a 100644 --- a/arch/arm/mach-omap1/dma.c +++ b/arch/arm/mach-omap1/dma.c @@ -345,6 +345,7 @@ static int __init omap1_system_dma_init(void) dev_err(&pdev->dev, "%s: Memory allocation failed for d->chan!\n", __func__); + ret = -ENOMEM; goto exit_release_d; } -- cgit v1.2.3 From a545ec160afea245939290e7f616f68de906a85c Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Thu, 16 May 2013 11:25:07 -0700 Subject: ARM: OMAP2+: Add missing CONFIG_ARCH_MULTI_V6=y to omap2plus_defconfig omap2plus_defconfig is missing CONFIG_ARCH_MULTI_V6. This results in undefined instruction traps in u-boot (and boot failures) on OMAP2xxx SoCs, which are ARM11-based. Fix by setting CONFIG_ARCH_MULTI_V6. Signed-off-by: Paul Walmsley Signed-off-by: Tony Lindgren --- arch/arm/configs/omap2plus_defconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig index c1ef64bc5abd..f59090210ec9 100644 --- a/arch/arm/configs/omap2plus_defconfig +++ b/arch/arm/configs/omap2plus_defconfig @@ -20,6 +20,7 @@ CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y # CONFIG_BLK_DEV_BSG is not set +CONFIG_ARCH_MULTI_V6=y CONFIG_ARCH_OMAP2PLUS=y CONFIG_OMAP_RESET_CLOCKS=y CONFIG_OMAP_MUX_DEBUG=y -- cgit v1.2.3 From 6211dd12da609bc6893b9c3182630b494737ec4b Mon Sep 17 00:00:00 2001 From: Stanislaw Gruszka Date: Fri, 17 May 2013 13:43:04 +0200 Subject: mac80211: fix direct probe auth We send direct probe to broadcast address, as some APs do not respond to unicast PROBE frames when unassociated. Broadcast frames are not acked, so we can not use that for trigger MLME state machine, but we need to use old timeout mechanism. This fixes authentication timed out like below: [ 1024.671974] wlan6: authenticate with 54:e6:fc:98:63:fe [ 1024.694125] wlan6: direct probe to 54:e6:fc:98:63:fe (try 1/3) [ 1024.695450] wlan6: direct probe to 54:e6:fc:98:63:fe (try 2/3) [ 1024.700586] wlan6: send auth to 54:e6:fc:98:63:fe (try 3/3) [ 1024.701441] wlan6: authentication with 54:e6:fc:98:63:fe timed out With fix, we have: [ 4524.198978] wlan6: authenticate with 54:e6:fc:98:63:fe [ 4524.220692] wlan6: direct probe to 54:e6:fc:98:63:fe (try 1/3) [ 4524.421784] wlan6: send auth to 54:e6:fc:98:63:fe (try 2/3) [ 4524.423272] wlan6: authenticated [ 4524.423811] wlan6: associate with 54:e6:fc:98:63:fe (try 1/3) [ 4524.427492] wlan6: RX AssocResp from 54:e6:fc:98:63:fe (capab=0x431 status=0 aid=1) Cc: stable@vger.kernel.org # 3.9 Signed-off-by: Stanislaw Gruszka Signed-off-by: Johannes Berg --- net/mac80211/mlme.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index a46e490f20dd..a8c2130c8ba4 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -3321,10 +3321,6 @@ static int ieee80211_probe_auth(struct ieee80211_sub_if_data *sdata) if (WARN_ON_ONCE(!auth_data)) return -EINVAL; - if (local->hw.flags & IEEE80211_HW_REPORTS_TX_ACK_STATUS) - tx_flags = IEEE80211_TX_CTL_REQ_TX_STATUS | - IEEE80211_TX_INTFL_MLME_CONN_TX; - auth_data->tries++; if (auth_data->tries > IEEE80211_AUTH_MAX_TRIES) { @@ -3358,6 +3354,10 @@ static int ieee80211_probe_auth(struct ieee80211_sub_if_data *sdata) auth_data->expected_transaction = trans; } + if (local->hw.flags & IEEE80211_HW_REPORTS_TX_ACK_STATUS) + tx_flags = IEEE80211_TX_CTL_REQ_TX_STATUS | + IEEE80211_TX_INTFL_MLME_CONN_TX; + ieee80211_send_auth(sdata, trans, auth_data->algorithm, status, auth_data->data, auth_data->data_len, auth_data->bss->bssid, @@ -3381,12 +3381,12 @@ static int ieee80211_probe_auth(struct ieee80211_sub_if_data *sdata) * will not answer to direct packet in unassociated state. */ ieee80211_send_probe_req(sdata, NULL, ssidie + 2, ssidie[1], - NULL, 0, (u32) -1, true, tx_flags, + NULL, 0, (u32) -1, true, 0, auth_data->bss->channel, false); rcu_read_unlock(); } - if (!(local->hw.flags & IEEE80211_HW_REPORTS_TX_ACK_STATUS)) { + if (tx_flags == 0) { auth_data->timeout = jiffies + IEEE80211_AUTH_TIMEOUT; ifmgd->auth_data->timeout_started = true; run_again(ifmgd, auth_data->timeout); -- cgit v1.2.3 From c6c003af0b91bb8722dbf2a8683cd40532e12079 Mon Sep 17 00:00:00 2001 From: Ezequiel Garcia Date: Fri, 17 May 2013 08:09:57 -0300 Subject: ARM: mvebu: Fix ranges entry on XP GP board With the latest device tree reorganization which introduced the 'internal-reg' node, now the only region translated is the internal register's. This makes the description of the hardware incomplete, for it lacks the Device Bus childs address space. In order to fix this, it's required to add a 'ranges' entry with a suitable address space to map Device Bus childs, on a per-board basis. This patch fixes the ranges property on the Armada XP GP board. Signed-off-by: Ezequiel Garcia Signed-off-by: Jason Cooper --- arch/arm/boot/dts/armada-xp-gp.dts | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/arm/boot/dts/armada-xp-gp.dts b/arch/arm/boot/dts/armada-xp-gp.dts index 26ad06fc147e..3ee63d128e27 100644 --- a/arch/arm/boot/dts/armada-xp-gp.dts +++ b/arch/arm/boot/dts/armada-xp-gp.dts @@ -39,6 +39,9 @@ }; soc { + ranges = <0 0 0xd0000000 0x100000 + 0xf0000000 0 0xf0000000 0x1000000>; + internal-regs { serial@12000 { clock-frequency = <250000000>; -- cgit v1.2.3 From a6d25f4c951b8b28f2eaec6f891ff834622532f2 Mon Sep 17 00:00:00 2001 From: Vaibhav Hiremath Date: Wed, 27 Mar 2013 15:34:26 +0530 Subject: ARM: AM33XX: Add missing .clkdm_name to clkdiv32k_ick clock It is required to enable respective clock-domain before enabling any clock/module inside that clock-domain. During common-clock migration, .clkdm_name field got missed for "clkdiv32k_ick" clock, which leaves "clk_24mhz_clkdm" unused; so it will be disabled even if childs of this clock-domain is enabled, which keeps child modules in idle mode. This fixes the kernel crash observed on AM335xEVM-SK platform, where clkdiv32_ick clock is being used as a gpio debounce clock and since clkdiv32k_ick is in idle mode it leads to below crash - Crash Log: ========== [ 2.598347] Unhandled fault: external abort on non-linefetch (0x1028) at 0xfa1ac150 [ 2.606434] Internal error: : 1028 [#1] SMP ARM [ 2.611207] Modules linked in: [ 2.614449] CPU: 0 Not tainted (3.8.4-01382-g1f449cd-dirty #4) [ 2.620973] PC is at _set_gpio_debounce+0x60/0x104 [ 2.626025] LR is at clk_enable+0x30/0x3c Cc: stable@vger.kernel.org # v3.9 Signed-off-by: Vaibhav Hiremath Cc: Rajendra Nayak Acked-by: Paul Walmsley Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/cclock33xx_data.c | 26 +++++++++++++++++++++++--- 1 file changed, 23 insertions(+), 3 deletions(-) diff --git a/arch/arm/mach-omap2/cclock33xx_data.c b/arch/arm/mach-omap2/cclock33xx_data.c index 6ebc7803bc3e..af3544ce4f02 100644 --- a/arch/arm/mach-omap2/cclock33xx_data.c +++ b/arch/arm/mach-omap2/cclock33xx_data.c @@ -454,9 +454,29 @@ DEFINE_CLK_GATE(cefuse_fck, "sys_clkin_ck", &sys_clkin_ck, 0x0, */ DEFINE_CLK_FIXED_FACTOR(clkdiv32k_ck, "clk_24mhz", &clk_24mhz, 0x0, 1, 732); -DEFINE_CLK_GATE(clkdiv32k_ick, "clkdiv32k_ck", &clkdiv32k_ck, 0x0, - AM33XX_CM_PER_CLKDIV32K_CLKCTRL, AM33XX_MODULEMODE_SWCTRL_SHIFT, - 0x0, NULL); +static struct clk clkdiv32k_ick; + +static const char *clkdiv32k_ick_parent_names[] = { + "clkdiv32k_ck", +}; + +static const struct clk_ops clkdiv32k_ick_ops = { + .enable = &omap2_dflt_clk_enable, + .disable = &omap2_dflt_clk_disable, + .is_enabled = &omap2_dflt_clk_is_enabled, + .init = &omap2_init_clk_clkdm, +}; + +static struct clk_hw_omap clkdiv32k_ick_hw = { + .hw = { + .clk = &clkdiv32k_ick, + }, + .enable_reg = AM33XX_CM_PER_CLKDIV32K_CLKCTRL, + .enable_bit = AM33XX_MODULEMODE_SWCTRL_SHIFT, + .clkdm_name = "clk_24mhz_clkdm", +}; + +DEFINE_STRUCT_CLK(clkdiv32k_ick, clkdiv32k_ick_parent_names, clkdiv32k_ick_ops); /* "usbotg_fck" is an additional clock and not really a modulemode */ DEFINE_CLK_GATE(usbotg_fck, "dpll_per_ck", &dpll_per_ck, 0x0, -- cgit v1.2.3 From fbe06b7bae7c9cf6ab05168fce5ee93b2f4bae7c Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Fri, 17 May 2013 11:49:10 -0700 Subject: x86, range: fix missing merge during add range MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Christian found v3.9 does not work with E350 with EFI is enabled. [ 1.658832] Trying to unpack rootfs image as initramfs... [ 1.679935] BUG: unable to handle kernel paging request at ffff88006e3fd000 [ 1.686940] IP: [] memset+0x1f/0xb0 [ 1.692010] PGD 1f77067 PUD 1f7a067 PMD 61420067 PTE 0 but early memtest report all memory could be accessed without problem. early page table is set in following sequence: [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] init_memory_mapping: [mem 0x6e600000-0x6e7fffff] [ 0.000000] init_memory_mapping: [mem 0x6c000000-0x6e5fffff] [ 0.000000] init_memory_mapping: [mem 0x00100000-0x6bffffff] [ 0.000000] init_memory_mapping: [mem 0x6e800000-0x6ea07fff] but later efi_enter_virtual_mode try set mapping again wrongly. [ 0.010644] pid_max: default: 32768 minimum: 301 [ 0.015302] init_memory_mapping: [mem 0x640c5000-0x6e3fcfff] that means it fails with pfn_range_is_mapped. It turns out that we have a bug in add_range_with_merge and it does not merge range properly when new add one fill the hole between two exsiting ranges. In the case when [mem 0x00100000-0x6bffffff] is the hole between [mem 0x00000000-0x000fffff] and [mem 0x6c000000-0x6e7fffff]. Fix the add_range_with_merge by calling itself recursively. Reported-by: "Christian König" Signed-off-by: Yinghai Lu Link: http://lkml.kernel.org/r/CAE9FiQVofGoSk7q5-0irjkBxemqK729cND4hov-1QCBJDhxpgQ@mail.gmail.com Cc: v3.9 Signed-off-by: H. Peter Anvin --- kernel/range.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/kernel/range.c b/kernel/range.c index 071b0ab455cb..eb911dbce267 100644 --- a/kernel/range.c +++ b/kernel/range.c @@ -48,9 +48,11 @@ int add_range_with_merge(struct range *range, int az, int nr_range, final_start = min(range[i].start, start); final_end = max(range[i].end, end); - range[i].start = final_start; - range[i].end = final_end; - return nr_range; + /* clear it and add it back for further merge */ + range[i].start = 0; + range[i].end = 0; + return add_range_with_merge(range, az, nr_range, + final_start, final_end); } /* Need to add it: */ -- cgit v1.2.3 From c689cbac25b4fce2f3d7de2e4dd6678caeebdcb8 Mon Sep 17 00:00:00 2001 From: Gregory CLEMENT Date: Fri, 17 May 2013 14:25:03 +0200 Subject: ARM: mvebu: select ARCH_REQUIRE_GPIOLIB for mvebu platform Initially ARCH_REQUIRE_GPIOLIB was part of Thomas Petazzoni series when he introduced the gpiolib support for mvebu: 93a59cf arm: mvebu: use GPIO support now that a driver is available This commit was written to be applied for the ARCH_MVEBU which was located in arch/arm/KConfig and was merged in 3.7. In the same time Rob Herring moved the ARCH_MVEBU block to arch/arm/mach-mvebu/Kconfig with this commit and also merged in 3.7: 387798b ARM: initial multiplatform support Unfortunately the ARCH_REQUIRE_GPIOLIB have been lost during this migration. This was not noticed until the v3.10-rc1, because mvebu as part of ARCH_MULTIPLATFORM was always selected with ARCH_VEXPRESS, and this architect selected ARCH_REQUIRE_GPIOLIB. Since the following commit from Arnd: "883a106 ARM: default machine descriptor for multiplatform", ARCH_VEXPRESS was then no more selected by default with ARCH_MVEBU and it made appeared the lack of ARCH_REQUIRE_GPIOLIB for mvebu. This commit added back the selection of ARCH_REQUIRE_GPIOLIB for ARCH_MVEBU. Signed-off-by: Gregory CLEMENT Signed-off-by: Jason Cooper --- arch/arm/mach-mvebu/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig index e11acbb0a46d..80a8bcacd9d5 100644 --- a/arch/arm/mach-mvebu/Kconfig +++ b/arch/arm/mach-mvebu/Kconfig @@ -15,6 +15,7 @@ config ARCH_MVEBU select MVEBU_CLK_GATING select MVEBU_MBUS select ZONE_DMA if ARM_LPAE + select ARCH_REQUIRE_GPIOLIB if ARCH_MVEBU -- cgit v1.2.3 From 8eed481e6fe2c28c2a579ada0c8ba5cbad45bf2c Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Thu, 16 May 2013 17:55:16 +0200 Subject: arm: mvebu: fix the 'ranges' property to handle PCIe Since 82a682676 ('ARM: dts: mvebu: Convert all the mvebu files to use the range property') all the device nodes of Armada 370/XP are under a common 'ranges' property that translates the device register addresses into their absolute address, thanks to the base address of the internal register space. However, beyond just the register areas, there are also PCIe I/O and memory regions, whose addresses should be properly translated. This patch fixes the Armada 370 and XP ranges property to take PCIe into account properly. Signed-off-by: Thomas Petazzoni Signed-off-by: Jason Cooper --- arch/arm/boot/dts/armada-370-xp.dtsi | 3 ++- arch/arm/boot/dts/armada-370.dtsi | 3 ++- 2 files changed, 4 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/armada-370-xp.dtsi b/arch/arm/boot/dts/armada-370-xp.dtsi index 272bbc65fab0..550eb772c30e 100644 --- a/arch/arm/boot/dts/armada-370-xp.dtsi +++ b/arch/arm/boot/dts/armada-370-xp.dtsi @@ -33,7 +33,8 @@ #size-cells = <1>; compatible = "simple-bus"; interrupt-parent = <&mpic>; - ranges = <0 0 0xd0000000 0x100000>; + ranges = <0 0 0xd0000000 0x0100000 /* internal registers */ + 0xe0000000 0 0xe0000000 0x8100000 /* PCIe */>; internal-regs { compatible = "simple-bus"; diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi index 0c9130b6fb80..a1a870364dd8 100644 --- a/arch/arm/boot/dts/armada-370.dtsi +++ b/arch/arm/boot/dts/armada-370.dtsi @@ -29,7 +29,8 @@ }; soc { - ranges = <0 0xd0000000 0x100000>; + ranges = <0 0xd0000000 0x0100000 /* internal registers */ + 0xe0000000 0xe0000000 0x8100000 /* PCIe */>; internal-regs { system-controller@18200 { compatible = "marvell,armada-370-xp-system-controller"; -- cgit v1.2.3 From 35513171eed4d7245e81d926d311e74f3dca06f3 Mon Sep 17 00:00:00 2001 From: Rajendra Nayak Date: Wed, 15 May 2013 20:18:37 +0530 Subject: ARM: OMAP2+: hwmod: Fix sidle programming in _enable_sysc()/_idle_sysc() _enable_sysc() and _idle_sysc() handle the midle mode programming correctly and program HWMOD_IDLEMODE_SMART or HWMOD_IDLEMODE_SMART_WKUP respectively for supported IPs (The ones which support hardware controlled midle modes) However the same programming logic is missing when it comes to sidle mode programming. Here they seem to just set HWMOD_IDLEMODE_SMART (Again for the ones which support hardware controlled sidle modes) This problem was hidden due to the fact that a call to _enable_wakeup() in those same functions would overwrite the idlemodes and program them correctly (to HWMOD_IDLEMODE_SMART_WKUP in the supported cases) So fix the sidlemode handling correctly in these functions and handle the _enable_wakeup() for SIDLEMODE supported IPs same as the way its handled for MIDLEMODE supported ones. Tested-by: Vaibhav Bedia Tested-by: Sourav Poddar Signed-off-by: Rajendra Nayak Signed-off-by: Santosh Shilimkar Reviewed-by: Kevin Hilman Tested-by: Kevin Hilman # OMAP4/Panda Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/omap_hwmod.c | 42 ++++++++++++++++++++++++---------------- 1 file changed, 25 insertions(+), 17 deletions(-) diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index d25a95fe9921..c28552bfeb8d 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -1356,13 +1356,26 @@ static void _enable_sysc(struct omap_hwmod *oh) clkdm = _get_clkdm(oh); if (sf & SYSC_HAS_SIDLEMODE) { + if (oh->flags & HWMOD_SWSUP_SIDLE) { + idlemode = HWMOD_IDLEMODE_NO; + } else { + if (sf & SYSC_HAS_ENAWAKEUP) + _enable_wakeup(oh, &v); + if (oh->class->sysc->idlemodes & SIDLE_SMART_WKUP) + idlemode = HWMOD_IDLEMODE_SMART_WKUP; + else + idlemode = HWMOD_IDLEMODE_SMART; + } + + /* + * This is special handling for some IPs like + * 32k sync timer. Force them to idle! + */ clkdm_act = (clkdm && clkdm->flags & CLKDM_ACTIVE_WITH_MPU); if (clkdm_act && !(oh->class->sysc->idlemodes & (SIDLE_SMART | SIDLE_SMART_WKUP))) idlemode = HWMOD_IDLEMODE_FORCE; - else - idlemode = (oh->flags & HWMOD_SWSUP_SIDLE) ? - HWMOD_IDLEMODE_NO : HWMOD_IDLEMODE_SMART; + _set_slave_idlemode(oh, idlemode, &v); } @@ -1391,10 +1404,6 @@ static void _enable_sysc(struct omap_hwmod *oh) (sf & SYSC_HAS_CLOCKACTIVITY)) _set_clockactivity(oh, oh->class->sysc->clockact, &v); - /* If slave is in SMARTIDLE, also enable wakeup */ - if ((sf & SYSC_HAS_SIDLEMODE) && !(oh->flags & HWMOD_SWSUP_SIDLE)) - _enable_wakeup(oh, &v); - _write_sysconfig(v, oh); /* @@ -1430,13 +1439,16 @@ static void _idle_sysc(struct omap_hwmod *oh) sf = oh->class->sysc->sysc_flags; if (sf & SYSC_HAS_SIDLEMODE) { - /* XXX What about HWMOD_IDLEMODE_SMART_WKUP? */ - if (oh->flags & HWMOD_SWSUP_SIDLE || - !(oh->class->sysc->idlemodes & - (SIDLE_SMART | SIDLE_SMART_WKUP))) + if (oh->flags & HWMOD_SWSUP_SIDLE) { idlemode = HWMOD_IDLEMODE_FORCE; - else - idlemode = HWMOD_IDLEMODE_SMART; + } else { + if (sf & SYSC_HAS_ENAWAKEUP) + _enable_wakeup(oh, &v); + if (oh->class->sysc->idlemodes & SIDLE_SMART_WKUP) + idlemode = HWMOD_IDLEMODE_SMART_WKUP; + else + idlemode = HWMOD_IDLEMODE_SMART; + } _set_slave_idlemode(oh, idlemode, &v); } @@ -1455,10 +1467,6 @@ static void _idle_sysc(struct omap_hwmod *oh) _set_master_standbymode(oh, idlemode, &v); } - /* If slave is in SMARTIDLE, also enable wakeup */ - if ((sf & SYSC_HAS_SIDLEMODE) && !(oh->flags & HWMOD_SWSUP_SIDLE)) - _enable_wakeup(oh, &v); - _write_sysconfig(v, oh); } -- cgit v1.2.3 From ca43ea345de96dc214be790b6cebedbdfe110b63 Mon Sep 17 00:00:00 2001 From: Rajendra Nayak Date: Wed, 15 May 2013 20:18:38 +0530 Subject: ARM: OMAP2+: hwmod: Add a new flag to handle SIDLE in SWSUP only in active Some IPs (like UART) need the sidle mode to be controlled in SW only while they are active. Once they go inactive, they need the IP to be put back in HW control so they are also wakeup capable. The flag HWMOD_SWSUP_SIDLE takes care of IPs which need the sidle mode to be *always* controlled in SWSUP. We now have a need to control IPs sidle mode in SWSUP only while its active. So define a new flag 'HWMOD_SWSUP_SIDLE_ACT' to help the framework know about these new IP requirements. Tested-by: Vaibhav Bedia Tested-by: Sourav Poddar Signed-off-by: Rajendra Nayak Signed-off-by: Santosh Shilimkar Reviewed-by: Kevin Hilman Tested-by: Kevin Hilman # OMAP4/Panda Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/omap_hwmod.c | 3 ++- arch/arm/mach-omap2/omap_hwmod.h | 4 ++++ 2 files changed, 6 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index c28552bfeb8d..5739429894b0 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -1356,7 +1356,8 @@ static void _enable_sysc(struct omap_hwmod *oh) clkdm = _get_clkdm(oh); if (sf & SYSC_HAS_SIDLEMODE) { - if (oh->flags & HWMOD_SWSUP_SIDLE) { + if (oh->flags & HWMOD_SWSUP_SIDLE || + oh->flags & HWMOD_SWSUP_SIDLE_ACT) { idlemode = HWMOD_IDLEMODE_NO; } else { if (sf & SYSC_HAS_ENAWAKEUP) diff --git a/arch/arm/mach-omap2/omap_hwmod.h b/arch/arm/mach-omap2/omap_hwmod.h index fe5962921f07..8498774b5fb1 100644 --- a/arch/arm/mach-omap2/omap_hwmod.h +++ b/arch/arm/mach-omap2/omap_hwmod.h @@ -463,6 +463,9 @@ struct omap_hwmod_omap4_prcm { * is kept in force-standby mode. Failing to do so causes PM problems * with musb on OMAP3630 at least. Note that musb has a dedicated register * to control MSTANDBY signal when MIDLEMODE is set to force-standby. + * HWMOD_SWSUP_SIDLE_ACT: omap_hwmod code should manually bring the module + * out of idle, but rely on smart-idle to the put it back in idle, + * so the wakeups are still functional (Only known case for now is UART) */ #define HWMOD_SWSUP_SIDLE (1 << 0) #define HWMOD_SWSUP_MSTANDBY (1 << 1) @@ -476,6 +479,7 @@ struct omap_hwmod_omap4_prcm { #define HWMOD_EXT_OPT_MAIN_CLK (1 << 9) #define HWMOD_BLOCK_WFI (1 << 10) #define HWMOD_FORCE_MSTANDBY (1 << 11) +#define HWMOD_SWSUP_SIDLE_ACT (1 << 12) /* * omap_hwmod._int_flags definitions -- cgit v1.2.3 From 66dde54e978a310c57a40023ff39835fa5ccd7a3 Mon Sep 17 00:00:00 2001 From: Santosh Shilimkar Date: Wed, 15 May 2013 20:18:39 +0530 Subject: ARM: OMAP2+: hwmod-data: UART IP needs software control to manage sidle modes OMAP UART IP needs software control for slave idle modes based on functional state of the IP. i.e The IP slave idle settings should be set to 'noidle' when being used and then put back to 'smart_idle' when unused. Currently this is handled by the driver with function pointers implemented in platform code. This however breaks in case of device tree because of missing idle handling APIs. Previous patches in this series added a flag HWMOD_SWSUP_SIDLE_ACTIVE which takes care of the mentioned requirement. Hence add the flag for all UART IPs to take advantage of feature supported by framework. Subsequent patches removes the slave idle handling from driver code. Tested-by: Vaibhav Bedia Tested-by: Sourav Poddar Signed-off-by: Rajendra Nayak Signed-off-by: Santosh Shilimkar Reviewed-by: Kevin Hilman Tested-by: Kevin Hilman # OMAP4/Panda Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c | 3 +++ arch/arm/mach-omap2/omap_hwmod_33xx_data.c | 6 ++++++ arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 4 ++++ arch/arm/mach-omap2/omap_hwmod_44xx_data.c | 6 +++++- 4 files changed, 18 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c index c8c64b3e1acc..d05fc7b54567 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c @@ -512,6 +512,7 @@ struct omap_hwmod omap2xxx_uart1_hwmod = { .mpu_irqs = omap2_uart1_mpu_irqs, .sdma_reqs = omap2_uart1_sdma_reqs, .main_clk = "uart1_fck", + .flags = HWMOD_SWSUP_SIDLE_ACT, .prcm = { .omap2 = { .module_offs = CORE_MOD, @@ -531,6 +532,7 @@ struct omap_hwmod omap2xxx_uart2_hwmod = { .mpu_irqs = omap2_uart2_mpu_irqs, .sdma_reqs = omap2_uart2_sdma_reqs, .main_clk = "uart2_fck", + .flags = HWMOD_SWSUP_SIDLE_ACT, .prcm = { .omap2 = { .module_offs = CORE_MOD, @@ -550,6 +552,7 @@ struct omap_hwmod omap2xxx_uart3_hwmod = { .mpu_irqs = omap2_uart3_mpu_irqs, .sdma_reqs = omap2_uart3_sdma_reqs, .main_clk = "uart3_fck", + .flags = HWMOD_SWSUP_SIDLE_ACT, .prcm = { .omap2 = { .module_offs = CORE_MOD, diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c index 01d8f324450a..075f7cc51026 100644 --- a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c @@ -1995,6 +1995,7 @@ static struct omap_hwmod am33xx_uart1_hwmod = { .name = "uart1", .class = &uart_class, .clkdm_name = "l4_wkup_clkdm", + .flags = HWMOD_SWSUP_SIDLE_ACT, .mpu_irqs = am33xx_uart1_irqs, .sdma_reqs = uart1_edma_reqs, .main_clk = "dpll_per_m2_div4_wkupdm_ck", @@ -2015,6 +2016,7 @@ static struct omap_hwmod am33xx_uart2_hwmod = { .name = "uart2", .class = &uart_class, .clkdm_name = "l4ls_clkdm", + .flags = HWMOD_SWSUP_SIDLE_ACT, .mpu_irqs = am33xx_uart2_irqs, .sdma_reqs = uart1_edma_reqs, .main_clk = "dpll_per_m2_div4_ck", @@ -2042,6 +2044,7 @@ static struct omap_hwmod am33xx_uart3_hwmod = { .name = "uart3", .class = &uart_class, .clkdm_name = "l4ls_clkdm", + .flags = HWMOD_SWSUP_SIDLE_ACT, .mpu_irqs = am33xx_uart3_irqs, .sdma_reqs = uart3_edma_reqs, .main_clk = "dpll_per_m2_div4_ck", @@ -2062,6 +2065,7 @@ static struct omap_hwmod am33xx_uart4_hwmod = { .name = "uart4", .class = &uart_class, .clkdm_name = "l4ls_clkdm", + .flags = HWMOD_SWSUP_SIDLE_ACT, .mpu_irqs = am33xx_uart4_irqs, .sdma_reqs = uart1_edma_reqs, .main_clk = "dpll_per_m2_div4_ck", @@ -2082,6 +2086,7 @@ static struct omap_hwmod am33xx_uart5_hwmod = { .name = "uart5", .class = &uart_class, .clkdm_name = "l4ls_clkdm", + .flags = HWMOD_SWSUP_SIDLE_ACT, .mpu_irqs = am33xx_uart5_irqs, .sdma_reqs = uart1_edma_reqs, .main_clk = "dpll_per_m2_div4_ck", @@ -2102,6 +2107,7 @@ static struct omap_hwmod am33xx_uart6_hwmod = { .name = "uart6", .class = &uart_class, .clkdm_name = "l4ls_clkdm", + .flags = HWMOD_SWSUP_SIDLE_ACT, .mpu_irqs = am33xx_uart6_irqs, .sdma_reqs = uart1_edma_reqs, .main_clk = "dpll_per_m2_div4_ck", diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index 4083606ea1da..31c7126eb3bb 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -490,6 +490,7 @@ static struct omap_hwmod omap3xxx_uart1_hwmod = { .mpu_irqs = omap2_uart1_mpu_irqs, .sdma_reqs = omap2_uart1_sdma_reqs, .main_clk = "uart1_fck", + .flags = HWMOD_SWSUP_SIDLE_ACT, .prcm = { .omap2 = { .module_offs = CORE_MOD, @@ -508,6 +509,7 @@ static struct omap_hwmod omap3xxx_uart2_hwmod = { .mpu_irqs = omap2_uart2_mpu_irqs, .sdma_reqs = omap2_uart2_sdma_reqs, .main_clk = "uart2_fck", + .flags = HWMOD_SWSUP_SIDLE_ACT, .prcm = { .omap2 = { .module_offs = CORE_MOD, @@ -526,6 +528,7 @@ static struct omap_hwmod omap3xxx_uart3_hwmod = { .mpu_irqs = omap2_uart3_mpu_irqs, .sdma_reqs = omap2_uart3_sdma_reqs, .main_clk = "uart3_fck", + .flags = HWMOD_SWSUP_SIDLE_ACT, .prcm = { .omap2 = { .module_offs = OMAP3430_PER_MOD, @@ -555,6 +558,7 @@ static struct omap_hwmod omap36xx_uart4_hwmod = { .mpu_irqs = uart4_mpu_irqs, .sdma_reqs = uart4_sdma_reqs, .main_clk = "uart4_fck", + .flags = HWMOD_SWSUP_SIDLE_ACT, .prcm = { .omap2 = { .module_offs = OMAP3430_PER_MOD, diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index eaba9dc91a0d..848b6dc67590 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -3434,6 +3434,7 @@ static struct omap_hwmod omap44xx_uart1_hwmod = { .name = "uart1", .class = &omap44xx_uart_hwmod_class, .clkdm_name = "l4_per_clkdm", + .flags = HWMOD_SWSUP_SIDLE_ACT, .mpu_irqs = omap44xx_uart1_irqs, .sdma_reqs = omap44xx_uart1_sdma_reqs, .main_clk = "func_48m_fclk", @@ -3462,6 +3463,7 @@ static struct omap_hwmod omap44xx_uart2_hwmod = { .name = "uart2", .class = &omap44xx_uart_hwmod_class, .clkdm_name = "l4_per_clkdm", + .flags = HWMOD_SWSUP_SIDLE_ACT, .mpu_irqs = omap44xx_uart2_irqs, .sdma_reqs = omap44xx_uart2_sdma_reqs, .main_clk = "func_48m_fclk", @@ -3490,7 +3492,8 @@ static struct omap_hwmod omap44xx_uart3_hwmod = { .name = "uart3", .class = &omap44xx_uart_hwmod_class, .clkdm_name = "l4_per_clkdm", - .flags = HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET, + .flags = HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET | + HWMOD_SWSUP_SIDLE_ACT, .mpu_irqs = omap44xx_uart3_irqs, .sdma_reqs = omap44xx_uart3_sdma_reqs, .main_clk = "func_48m_fclk", @@ -3519,6 +3522,7 @@ static struct omap_hwmod omap44xx_uart4_hwmod = { .name = "uart4", .class = &omap44xx_uart_hwmod_class, .clkdm_name = "l4_per_clkdm", + .flags = HWMOD_SWSUP_SIDLE_ACT, .mpu_irqs = omap44xx_uart4_irqs, .sdma_reqs = omap44xx_uart4_sdma_reqs, .main_clk = "func_48m_fclk", -- cgit v1.2.3 From e59cd225c0ad280122cb69e04cd66699557875a4 Mon Sep 17 00:00:00 2001 From: Santosh Shilimkar Date: Wed, 15 May 2013 20:18:40 +0530 Subject: ARM: OMAP2+: serial: Remove the un-used slave idle hooks UART IP idle handling now taken care by runtime pm backend(hwmod) indirectly and OMAP serial driver is also cleaned up accordingly. So remove the un-used slave idle platforms hooks now. Tested-by: Vaibhav Bedia Tested-by: Sourav Poddar Signed-off-by: Rajendra nayak Signed-off-by: Santosh Shilimkar Reviewed-by: Kevin Hilman Tested-by: Kevin Hilman # OMAP4/Panda Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/serial.c | 31 ------------------------------- 1 file changed, 31 deletions(-) diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index 8396b5b7e912..f6601563aa69 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -95,38 +95,9 @@ static void omap_uart_enable_wakeup(struct device *dev, bool enable) omap_hwmod_disable_wakeup(od->hwmods[0]); } -/* - * Errata i291: [UART]:Cannot Acknowledge Idle Requests - * in Smartidle Mode When Configured for DMA Operations. - * WA: configure uart in force idle mode. - */ -static void omap_uart_set_noidle(struct device *dev) -{ - struct platform_device *pdev = to_platform_device(dev); - struct omap_device *od = to_omap_device(pdev); - - omap_hwmod_set_slave_idlemode(od->hwmods[0], HWMOD_IDLEMODE_NO); -} - -static void omap_uart_set_smartidle(struct device *dev) -{ - struct platform_device *pdev = to_platform_device(dev); - struct omap_device *od = to_omap_device(pdev); - u8 idlemode; - - if (od->hwmods[0]->class->sysc->idlemodes & SIDLE_SMART_WKUP) - idlemode = HWMOD_IDLEMODE_SMART_WKUP; - else - idlemode = HWMOD_IDLEMODE_SMART; - - omap_hwmod_set_slave_idlemode(od->hwmods[0], idlemode); -} - #else static void omap_uart_enable_wakeup(struct device *dev, bool enable) {} -static void omap_uart_set_noidle(struct device *dev) {} -static void omap_uart_set_smartidle(struct device *dev) {} #endif /* CONFIG_PM */ #ifdef CONFIG_OMAP_MUX @@ -299,8 +270,6 @@ void __init omap_serial_init_port(struct omap_board_data *bdata, omap_up.uartclk = OMAP24XX_BASE_BAUD * 16; omap_up.flags = UPF_BOOT_AUTOCONF; omap_up.get_context_loss_count = omap_pm_get_dev_context_loss_count; - omap_up.set_forceidle = omap_uart_set_smartidle; - omap_up.set_noidle = omap_uart_set_noidle; omap_up.enable_wakeup = omap_uart_enable_wakeup; omap_up.dma_rx_buf_size = info->dma_rx_buf_size; omap_up.dma_rx_timeout = info->dma_rx_timeout; -- cgit v1.2.3 From 7f18d05a1af75142d4856a91ffd2f1d8eb553c12 Mon Sep 17 00:00:00 2001 From: Santosh Shilimkar Date: Wed, 15 May 2013 20:18:41 +0530 Subject: SERIAL: OMAP: Remove the slave idle handling from the driver UART IP slave idle handling now taken care by runtime pm backend(hwmod layer) so remove the hackery from the driver. As discussed on the list, in future if dma mode needs to be brought back to this driver, UART sysc handling needs to be updated in framework such a way that no-idle/force idle profile can be supported. Given the broken dma mode for OMAP uarts, its very unlikely. Acked-by: Greg Kroah-Hartman Tested-by: Vaibhav Bedia Tested-by: Sourav Poddar Signed-off-by: Rajendra nayak Signed-off-by: Santosh Shilimkar Reviewed-by: Kevin Hilman Tested-by: Kevin Hilman # OMAP4/Panda Signed-off-by: Paul Walmsley --- drivers/tty/serial/omap-serial.c | 23 ----------------------- include/linux/platform_data/serial-omap.h | 2 -- 2 files changed, 25 deletions(-) diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c index 30d4f7a783cd..f0b9f6b52b32 100644 --- a/drivers/tty/serial/omap-serial.c +++ b/drivers/tty/serial/omap-serial.c @@ -202,26 +202,6 @@ static int serial_omap_get_context_loss_count(struct uart_omap_port *up) return pdata->get_context_loss_count(up->dev); } -static void serial_omap_set_forceidle(struct uart_omap_port *up) -{ - struct omap_uart_port_info *pdata = up->dev->platform_data; - - if (!pdata || !pdata->set_forceidle) - return; - - pdata->set_forceidle(up->dev); -} - -static void serial_omap_set_noidle(struct uart_omap_port *up) -{ - struct omap_uart_port_info *pdata = up->dev->platform_data; - - if (!pdata || !pdata->set_noidle) - return; - - pdata->set_noidle(up->dev); -} - static void serial_omap_enable_wakeup(struct uart_omap_port *up, bool enable) { struct omap_uart_port_info *pdata = up->dev->platform_data; @@ -298,8 +278,6 @@ static void serial_omap_stop_tx(struct uart_port *port) serial_out(up, UART_IER, up->ier); } - serial_omap_set_forceidle(up); - pm_runtime_mark_last_busy(up->dev); pm_runtime_put_autosuspend(up->dev); } @@ -364,7 +342,6 @@ static void serial_omap_start_tx(struct uart_port *port) pm_runtime_get_sync(up->dev); serial_omap_enable_ier_thri(up); - serial_omap_set_noidle(up); pm_runtime_mark_last_busy(up->dev); pm_runtime_put_autosuspend(up->dev); } diff --git a/include/linux/platform_data/serial-omap.h b/include/linux/platform_data/serial-omap.h index ff9b0aab5281..c860c1b314c0 100644 --- a/include/linux/platform_data/serial-omap.h +++ b/include/linux/platform_data/serial-omap.h @@ -43,8 +43,6 @@ struct omap_uart_port_info { int DTR_present; int (*get_context_loss_count)(struct device *); - void (*set_forceidle)(struct device *); - void (*set_noidle)(struct device *); void (*enable_wakeup)(struct device *, bool); }; -- cgit v1.2.3 From 3260c76055afc6c9396e5ad9f9e599505ea8891f Mon Sep 17 00:00:00 2001 From: Santosh Shilimkar Date: Wed, 15 May 2013 20:18:42 +0530 Subject: ARM: OMAP2+: hwmod: Remove sysc slave idle and auto idle apis With the OMAP serial driver sysc cleanup patches in this series, we can now remove the hwmod external apis for sysc fiddling. While at this, also remove unused sysc auto idle api from hwmod code. Tested-by: Vaibhav Bedia Tested-by: Sourav Poddar Signed-off-by: Rajendra nayak Signed-off-by: Santosh Shilimkar Reviewed-by: Kevin Hilman Tested-by: Kevin Hilman # OMAP4/Panda Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/omap_hwmod.c | 68 ---------------------------------------- arch/arm/mach-omap2/omap_hwmod.h | 3 -- 2 files changed, 71 deletions(-) diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index 5739429894b0..03931425029b 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -2254,42 +2254,6 @@ static int _idle(struct omap_hwmod *oh) return 0; } -/** - * omap_hwmod_set_ocp_autoidle - set the hwmod's OCP autoidle bit - * @oh: struct omap_hwmod * - * @autoidle: desired AUTOIDLE bitfield value (0 or 1) - * - * Sets the IP block's OCP autoidle bit in hardware, and updates our - * local copy. Intended to be used by drivers that require - * direct manipulation of the AUTOIDLE bits. - * Returns -EINVAL if @oh is null or is not in the ENABLED state, or passes - * along the return value from _set_module_autoidle(). - * - * Any users of this function should be scrutinized carefully. - */ -int omap_hwmod_set_ocp_autoidle(struct omap_hwmod *oh, u8 autoidle) -{ - u32 v; - int retval = 0; - unsigned long flags; - - if (!oh || oh->_state != _HWMOD_STATE_ENABLED) - return -EINVAL; - - spin_lock_irqsave(&oh->_lock, flags); - - v = oh->_sysc_cache; - - retval = _set_module_autoidle(oh, autoidle, &v); - - if (!retval) - _write_sysconfig(v, oh); - - spin_unlock_irqrestore(&oh->_lock, flags); - - return retval; -} - /** * _shutdown - shutdown an omap_hwmod * @oh: struct omap_hwmod * @@ -3188,38 +3152,6 @@ error: return ret; } -/** - * omap_hwmod_set_slave_idlemode - set the hwmod's OCP slave idlemode - * @oh: struct omap_hwmod * - * @idlemode: SIDLEMODE field bits (shifted to bit 0) - * - * Sets the IP block's OCP slave idlemode in hardware, and updates our - * local copy. Intended to be used by drivers that have some erratum - * that requires direct manipulation of the SIDLEMODE bits. Returns - * -EINVAL if @oh is null, or passes along the return value from - * _set_slave_idlemode(). - * - * XXX Does this function have any current users? If not, we should - * remove it; it is better to let the rest of the hwmod code handle this. - * Any users of this function should be scrutinized carefully. - */ -int omap_hwmod_set_slave_idlemode(struct omap_hwmod *oh, u8 idlemode) -{ - u32 v; - int retval = 0; - - if (!oh) - return -EINVAL; - - v = oh->_sysc_cache; - - retval = _set_slave_idlemode(oh, idlemode, &v); - if (!retval) - _write_sysconfig(v, oh); - - return retval; -} - /** * omap_hwmod_lookup - look up a registered omap_hwmod by name * @name: name of the omap_hwmod to look up diff --git a/arch/arm/mach-omap2/omap_hwmod.h b/arch/arm/mach-omap2/omap_hwmod.h index 8498774b5fb1..0c898f58ac9b 100644 --- a/arch/arm/mach-omap2/omap_hwmod.h +++ b/arch/arm/mach-omap2/omap_hwmod.h @@ -645,9 +645,6 @@ int omap_hwmod_read_hardreset(struct omap_hwmod *oh, const char *name); int omap_hwmod_enable_clocks(struct omap_hwmod *oh); int omap_hwmod_disable_clocks(struct omap_hwmod *oh); -int omap_hwmod_set_slave_idlemode(struct omap_hwmod *oh, u8 idlemode); -int omap_hwmod_set_ocp_autoidle(struct omap_hwmod *oh, u8 autoidle); - int omap_hwmod_reset(struct omap_hwmod *oh); void omap_hwmod_ocp_barrier(struct omap_hwmod *oh); -- cgit v1.2.3 From 3d15aacbb802af72b4ff0c3ba576536cdb3bace0 Mon Sep 17 00:00:00 2001 From: Andrew Bresticker Date: Sun, 19 May 2013 22:58:07 -0700 Subject: ASoC: max98090: request IRQF_ONESHOT interrupt request_threaded_irq() rejects calls which both do not specify a handler (indicating that the primary IRQ handler should be used) and do not set IRQF_ONESHOT because the combination is unsafe with level-triggered interrupts. It is safe in this case, though, since max98090 IRQs are edge-triggered and the interrupts aren't ACK'ed until the codec's IRQ status register is read. Because of this, an IRQF_ONESHOT interrupt doesn't really make a difference, but request one anyway in order to make request_threaded_irq() happy. Signed-off-by: Andrew Bresticker Signed-off-by: Mark Brown --- sound/soc/codecs/max98090.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/codecs/max98090.c b/sound/soc/codecs/max98090.c index ce0d36412c97..8d14a76c7249 100644 --- a/sound/soc/codecs/max98090.c +++ b/sound/soc/codecs/max98090.c @@ -2233,7 +2233,7 @@ static int max98090_probe(struct snd_soc_codec *codec) dev_dbg(codec->dev, "irq = %d\n", max98090->irq); ret = request_threaded_irq(max98090->irq, NULL, - max98090_interrupt, IRQF_TRIGGER_FALLING, + max98090_interrupt, IRQF_TRIGGER_FALLING | IRQF_ONESHOT, "max98090_interrupt", codec); if (ret < 0) { dev_err(codec->dev, "request_irq failed: %d\n", -- cgit v1.2.3 From 2c071ed7c3660992951abe4b560359058ce41f68 Mon Sep 17 00:00:00 2001 From: Charles Keepax Date: Mon, 20 May 2013 08:33:54 +0100 Subject: ASoC: soc-compress: Send correct stream event for capture start Signed-off-by: Charles Keepax Signed-off-by: Mark Brown --- sound/soc/soc-compress.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/sound/soc/soc-compress.c b/sound/soc/soc-compress.c index 3853f7eb3f28..06a8000aa07b 100644 --- a/sound/soc/soc-compress.c +++ b/sound/soc/soc-compress.c @@ -220,8 +220,12 @@ static int soc_compr_set_params(struct snd_compr_stream *cstream, goto err; } - snd_soc_dapm_stream_event(rtd, SNDRV_PCM_STREAM_PLAYBACK, - SND_SOC_DAPM_STREAM_START); + if (cstream->direction == SND_COMPRESS_PLAYBACK) + snd_soc_dapm_stream_event(rtd, SNDRV_PCM_STREAM_PLAYBACK, + SND_SOC_DAPM_STREAM_START); + else + snd_soc_dapm_stream_event(rtd, SNDRV_PCM_STREAM_CAPTURE, + SND_SOC_DAPM_STREAM_START); /* cancel any delayed stream shutdown that is pending */ rtd->pop_wait = 0; -- cgit v1.2.3 From 3634a6327815d39dd93e5c44a602daae91c66297 Mon Sep 17 00:00:00 2001 From: Brian Foster Date: Fri, 17 May 2013 09:30:32 -0400 Subject: fuse: truncate pagecache range on hole punch fuse supports hole punch via the fallocate() FALLOC_FL_PUNCH_HOLE interface. When a hole punch is passed through, the page cache is not cleared and thus allows reading stale data from the cache. This is easily demonstrable (using FOPEN_KEEP_CACHE) by reading a smallish random data file into cache, punching a hole and creating a copy of the file. Drop caches or remount and observe that the original file no longer matches the file copied after the hole punch. The original file contains a zeroed range and the latter file contains stale data. Protect against writepage requests in progress and punch out the associated page cache range after a successful client fs hole punch. Signed-off-by: Brian Foster Signed-off-by: Miklos Szeredi --- fs/fuse/file.c | 22 ++++++++++++++++++++-- 1 file changed, 20 insertions(+), 2 deletions(-) diff --git a/fs/fuse/file.c b/fs/fuse/file.c index fe191325fefa..a200a2d80377 100644 --- a/fs/fuse/file.c +++ b/fs/fuse/file.c @@ -16,6 +16,7 @@ #include #include #include +#include static const struct file_operations fuse_direct_io_file_operations; @@ -2453,6 +2454,7 @@ static long fuse_file_fallocate(struct file *file, int mode, loff_t offset, loff_t length) { struct fuse_file *ff = file->private_data; + struct inode *inode = file->f_inode; struct fuse_conn *fc = ff->fc; struct fuse_req *req; struct fuse_fallocate_in inarg = { @@ -2466,9 +2468,16 @@ static long fuse_file_fallocate(struct file *file, int mode, loff_t offset, if (fc->no_fallocate) return -EOPNOTSUPP; + if (mode & FALLOC_FL_PUNCH_HOLE) { + mutex_lock(&inode->i_mutex); + fuse_set_nowrite(inode); + } + req = fuse_get_req_nopages(fc); - if (IS_ERR(req)) - return PTR_ERR(req); + if (IS_ERR(req)) { + err = PTR_ERR(req); + goto out; + } req->in.h.opcode = FUSE_FALLOCATE; req->in.h.nodeid = ff->nodeid; @@ -2483,6 +2492,15 @@ static long fuse_file_fallocate(struct file *file, int mode, loff_t offset, } fuse_put_request(fc, req); +out: + if (mode & FALLOC_FL_PUNCH_HOLE) { + if (!err) + truncate_pagecache_range(inode, offset, + offset + length - 1); + fuse_release_nowrite(inode); + mutex_unlock(&inode->i_mutex); + } + return err; } -- cgit v1.2.3 From bee6c307800bbb26ba1a855b1841c2f0c4b7622a Mon Sep 17 00:00:00 2001 From: Brian Foster Date: Fri, 17 May 2013 15:27:34 -0400 Subject: fuse: update inode size and invalidate attributes on fallocate An fallocate request without FALLOC_FL_KEEP_SIZE set can extend the size of a file. Update the inode size after a successful fallocate. Also invalidate the inode attributes after a successful fallocate to ensure we pick up the latest attribute values (i.e., i_blocks). Signed-off-by: Brian Foster Signed-off-by: Miklos Szeredi --- fs/fuse/file.c | 15 ++++++++++++--- 1 file changed, 12 insertions(+), 3 deletions(-) diff --git a/fs/fuse/file.c b/fs/fuse/file.c index a200a2d80377..d9f467907791 100644 --- a/fs/fuse/file.c +++ b/fs/fuse/file.c @@ -2492,11 +2492,20 @@ static long fuse_file_fallocate(struct file *file, int mode, loff_t offset, } fuse_put_request(fc, req); + if (err) + goto out; + + /* we could have extended the file */ + if (!(mode & FALLOC_FL_KEEP_SIZE)) + fuse_write_update_size(inode, offset + length); + + if (mode & FALLOC_FL_PUNCH_HOLE) + truncate_pagecache_range(inode, offset, offset + length - 1); + + fuse_invalidate_attr(inode); + out: if (mode & FALLOC_FL_PUNCH_HOLE) { - if (!err) - truncate_pagecache_range(inode, offset, - offset + length - 1); fuse_release_nowrite(inode); mutex_unlock(&inode->i_mutex); } -- cgit v1.2.3 From 7ec892ef5f1bd707e2d5ab128069cb6af75c7f07 Mon Sep 17 00:00:00 2001 From: Vivek Gautam Date: Wed, 10 Apr 2013 19:30:38 +0900 Subject: ARM: dts: Enabling samsung-usb2phy driver for exynos5250 Adding usbphy node for Exynos5250 along with the necessary device data to be parsed. Signed-off-by: Vivek Gautam Signed-off-by: Kukjin Kim --- arch/arm/boot/dts/exynos5250.dtsi | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi index 98dfc3ea5c0b..0673524238a6 100644 --- a/arch/arm/boot/dts/exynos5250.dtsi +++ b/arch/arm/boot/dts/exynos5250.dtsi @@ -497,6 +497,21 @@ clock-names = "usbhost"; }; + usbphy@12130000 { + compatible = "samsung,exynos5250-usb2phy"; + reg = <0x12130000 0x100>; + clocks = <&clock 1>, <&clock 285>; + clock-names = "ext_xtal", "usbhost"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + usbphy-sys { + reg = <0x10040704 0x8>, + <0x10050230 0x4>; + }; + }; + amba { #address-cells = <1>; #size-cells = <1>; -- cgit v1.2.3 From 62cc4d595fe96106ff793cbebbff051179d7619e Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Mon, 20 May 2013 11:28:35 -0500 Subject: ASoC: wm5110: Add missing speaker initialisation Add callback to initialise the speaker in the core following the recent changes to handling of integration with the thermal interrupts. Signed-off-by: Mark Brown --- sound/soc/codecs/wm5110.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/sound/soc/codecs/wm5110.c b/sound/soc/codecs/wm5110.c index 731884e04776..c00480bdf824 100644 --- a/sound/soc/codecs/wm5110.c +++ b/sound/soc/codecs/wm5110.c @@ -976,6 +976,8 @@ static int wm5110_codec_probe(struct snd_soc_codec *codec) if (ret != 0) return ret; + arizona_init_spk(codec); + snd_soc_dapm_disable_pin(&codec->dapm, "HAPTICS"); priv->core.arizona->dapm = &codec->dapm; -- cgit v1.2.3 From 2b8b2797142c7951e635c6eec5d1705ee9bc45c5 Mon Sep 17 00:00:00 2001 From: Gregory CLEMENT Date: Sun, 19 May 2013 22:12:43 +0200 Subject: ARM: plat-orion: Fix num_resources and id for ge10 and ge11 When platform data were moved from arch/arm/mach-mv78xx0/common.c to arch/arm/plat-orion/common.c with the commit "7e3819d ARM: orion: Consolidate ethernet platform data", there were few typo made on gigabit Ethernet interface ge10 and ge11. This commit writes back their initial value, which allows to use this interfaces again. Signed-off-by: Gregory CLEMENT Acked-by: Andrew Lunn Cc: # v3.0.x Signed-off-by: Jason Cooper --- arch/arm/plat-orion/common.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/arch/arm/plat-orion/common.c b/arch/arm/plat-orion/common.c index 251f827271e9..c019b7aaf776 100644 --- a/arch/arm/plat-orion/common.c +++ b/arch/arm/plat-orion/common.c @@ -383,7 +383,7 @@ static struct resource orion_ge10_shared_resources[] = { static struct platform_device orion_ge10_shared = { .name = MV643XX_ETH_SHARED_NAME, - .id = 1, + .id = 2, .dev = { .platform_data = &orion_ge10_shared_data, }, @@ -398,8 +398,8 @@ static struct resource orion_ge10_resources[] = { static struct platform_device orion_ge10 = { .name = MV643XX_ETH_NAME, - .id = 1, - .num_resources = 2, + .id = 2, + .num_resources = 1, .resource = orion_ge10_resources, .dev = { .coherent_dma_mask = DMA_BIT_MASK(32), @@ -432,7 +432,7 @@ static struct resource orion_ge11_shared_resources[] = { static struct platform_device orion_ge11_shared = { .name = MV643XX_ETH_SHARED_NAME, - .id = 1, + .id = 3, .dev = { .platform_data = &orion_ge11_shared_data, }, @@ -447,8 +447,8 @@ static struct resource orion_ge11_resources[] = { static struct platform_device orion_ge11 = { .name = MV643XX_ETH_NAME, - .id = 1, - .num_resources = 2, + .id = 3, + .num_resources = 1, .resource = orion_ge11_resources, .dev = { .coherent_dma_mask = DMA_BIT_MASK(32), -- cgit v1.2.3 From 489e138eec96f529c5e8d4cd3ea45882ecdbf5ca Mon Sep 17 00:00:00 2001 From: Gregory CLEMENT Date: Mon, 20 May 2013 16:13:27 +0200 Subject: ARM: dts: mvebu: Fix wrong the address reg value for the L2-cache node During the conversion to the internal-regs' subnode, the L2-cache node haven not been converted (due to a wrong choice made by myself during the resolution of the merge conflict when I rebased the commit). This leads to wrong address for L2 cache which prevent it to be used on Armada 370. This commit fix the address reg of the e L2-cache node. Signed-off-by: Gregory CLEMENT Signed-off-by: Jason Cooper --- arch/arm/boot/dts/armada-370.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi index a1a870364dd8..aee2b1866ce2 100644 --- a/arch/arm/boot/dts/armada-370.dtsi +++ b/arch/arm/boot/dts/armada-370.dtsi @@ -39,7 +39,7 @@ L2: l2-cache { compatible = "marvell,aurora-outer-cache"; - reg = <0xd0008000 0x1000>; + reg = <0x08000 0x1000>; cache-id-part = <0x100>; wt-override; }; -- cgit v1.2.3 From 774d5f14ee1ecac55f42a84ff35eb00b896b00b6 Mon Sep 17 00:00:00 2001 From: Andy Adamson Date: Mon, 20 May 2013 14:13:50 -0400 Subject: NFSv4.1 Fix a pNFS session draining deadlock On a CB_RECALL the callback service thread flushes the inode using filemap_flush prior to scheduling the state manager thread to return the delegation. When pNFS is used and I/O has not yet gone to the data server servicing the inode, a LAYOUTGET can preceed the I/O. Unlike the async filemap_flush call, the LAYOUTGET must proceed to completion. If the state manager starts to recover data while the inode flush is sending the LAYOUTGET, a deadlock occurs as the callback service thread holds the single callback session slot until the flushing is done which blocks the state manager thread, and the state manager thread has set the session draining bit which puts the inode flush LAYOUTGET RPC to sleep on the forechannel slot table waitq. Separate the draining of the back channel from the draining of the fore channel by moving the NFS4_SESSION_DRAINING bit from session scope into the fore and back slot tables. Drain the back channel first allowing the LAYOUTGET call to proceed (and fail) so the callback service thread frees the callback slot. Then proceed with draining the forechannel. Signed-off-by: Andy Adamson Signed-off-by: Trond Myklebust --- fs/nfs/callback_proc.c | 2 +- fs/nfs/callback_xdr.c | 2 +- fs/nfs/nfs4proc.c | 2 +- fs/nfs/nfs4session.c | 4 ++-- fs/nfs/nfs4session.h | 13 ++++++++----- fs/nfs/nfs4state.c | 15 +++++++-------- 6 files changed, 20 insertions(+), 18 deletions(-) diff --git a/fs/nfs/callback_proc.c b/fs/nfs/callback_proc.c index a13d26ede254..0bc27684ebfa 100644 --- a/fs/nfs/callback_proc.c +++ b/fs/nfs/callback_proc.c @@ -414,7 +414,7 @@ __be32 nfs4_callback_sequence(struct cb_sequenceargs *args, spin_lock(&tbl->slot_tbl_lock); /* state manager is resetting the session */ - if (test_bit(NFS4_SESSION_DRAINING, &clp->cl_session->session_state)) { + if (test_bit(NFS4_SLOT_TBL_DRAINING, &tbl->slot_tbl_state)) { spin_unlock(&tbl->slot_tbl_lock); status = htonl(NFS4ERR_DELAY); /* Return NFS4ERR_BADSESSION if we're draining the session diff --git a/fs/nfs/callback_xdr.c b/fs/nfs/callback_xdr.c index 59461c957d9d..a35582c9d444 100644 --- a/fs/nfs/callback_xdr.c +++ b/fs/nfs/callback_xdr.c @@ -763,7 +763,7 @@ static void nfs4_callback_free_slot(struct nfs4_session *session) * A single slot, so highest used slotid is either 0 or -1 */ tbl->highest_used_slotid = NFS4_NO_SLOT; - nfs4_session_drain_complete(session, tbl); + nfs4_slot_tbl_drain_complete(tbl); spin_unlock(&tbl->slot_tbl_lock); } diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index 8fbc10054115..4e2fe714d5c2 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -572,7 +572,7 @@ int nfs41_setup_sequence(struct nfs4_session *session, task->tk_timeout = 0; spin_lock(&tbl->slot_tbl_lock); - if (test_bit(NFS4_SESSION_DRAINING, &session->session_state) && + if (test_bit(NFS4_SLOT_TBL_DRAINING, &tbl->slot_tbl_state) && !args->sa_privileged) { /* The state manager will wait until the slot table is empty */ dprintk("%s session is draining\n", __func__); diff --git a/fs/nfs/nfs4session.c b/fs/nfs/nfs4session.c index ebda5f4a031b..c4e225e4a9af 100644 --- a/fs/nfs/nfs4session.c +++ b/fs/nfs/nfs4session.c @@ -73,7 +73,7 @@ void nfs4_free_slot(struct nfs4_slot_table *tbl, struct nfs4_slot *slot) tbl->highest_used_slotid = new_max; else { tbl->highest_used_slotid = NFS4_NO_SLOT; - nfs4_session_drain_complete(tbl->session, tbl); + nfs4_slot_tbl_drain_complete(tbl); } } dprintk("%s: slotid %u highest_used_slotid %d\n", __func__, @@ -226,7 +226,7 @@ static bool nfs41_assign_slot(struct rpc_task *task, void *pslot) struct nfs4_slot *slot = pslot; struct nfs4_slot_table *tbl = slot->table; - if (nfs4_session_draining(tbl->session) && !args->sa_privileged) + if (nfs4_slot_tbl_draining(tbl) && !args->sa_privileged) return false; slot->generation = tbl->generation; args->sa_slot = slot; diff --git a/fs/nfs/nfs4session.h b/fs/nfs/nfs4session.h index 6f3cb39386d4..ff7d9f0f8a65 100644 --- a/fs/nfs/nfs4session.h +++ b/fs/nfs/nfs4session.h @@ -25,6 +25,10 @@ struct nfs4_slot { }; /* Sessions */ +enum nfs4_slot_tbl_state { + NFS4_SLOT_TBL_DRAINING, +}; + #define SLOT_TABLE_SZ DIV_ROUND_UP(NFS4_MAX_SLOT_TABLE, 8*sizeof(long)) struct nfs4_slot_table { struct nfs4_session *session; /* Parent session */ @@ -43,6 +47,7 @@ struct nfs4_slot_table { unsigned long generation; /* Generation counter for target_highest_slotid */ struct completion complete; + unsigned long slot_tbl_state; }; /* @@ -68,7 +73,6 @@ struct nfs4_session { enum nfs4_session_state { NFS4_SESSION_INITING, - NFS4_SESSION_DRAINING, }; #if defined(CONFIG_NFS_V4_1) @@ -88,12 +92,11 @@ extern void nfs4_destroy_session(struct nfs4_session *session); extern int nfs4_init_session(struct nfs_server *server); extern int nfs4_init_ds_session(struct nfs_client *, unsigned long); -extern void nfs4_session_drain_complete(struct nfs4_session *session, - struct nfs4_slot_table *tbl); +extern void nfs4_slot_tbl_drain_complete(struct nfs4_slot_table *tbl); -static inline bool nfs4_session_draining(struct nfs4_session *session) +static inline bool nfs4_slot_tbl_draining(struct nfs4_slot_table *tbl) { - return !!test_bit(NFS4_SESSION_DRAINING, &session->session_state); + return !!test_bit(NFS4_SLOT_TBL_DRAINING, &tbl->slot_tbl_state); } bool nfs41_wake_and_assign_slot(struct nfs4_slot_table *tbl, diff --git a/fs/nfs/nfs4state.c b/fs/nfs/nfs4state.c index 300d17d85c0e..1fab140764c4 100644 --- a/fs/nfs/nfs4state.c +++ b/fs/nfs/nfs4state.c @@ -241,7 +241,7 @@ static void nfs4_end_drain_session(struct nfs_client *clp) if (ses == NULL) return; tbl = &ses->fc_slot_table; - if (test_and_clear_bit(NFS4_SESSION_DRAINING, &ses->session_state)) { + if (test_and_clear_bit(NFS4_SLOT_TBL_DRAINING, &tbl->slot_tbl_state)) { spin_lock(&tbl->slot_tbl_lock); nfs41_wake_slot_table(tbl); spin_unlock(&tbl->slot_tbl_lock); @@ -251,15 +251,15 @@ static void nfs4_end_drain_session(struct nfs_client *clp) /* * Signal state manager thread if session fore channel is drained */ -void nfs4_session_drain_complete(struct nfs4_session *session, - struct nfs4_slot_table *tbl) +void nfs4_slot_tbl_drain_complete(struct nfs4_slot_table *tbl) { - if (nfs4_session_draining(session)) + if (nfs4_slot_tbl_draining(tbl)) complete(&tbl->complete); } -static int nfs4_wait_on_slot_tbl(struct nfs4_slot_table *tbl) +static int nfs4_drain_slot_tbl(struct nfs4_slot_table *tbl) { + set_bit(NFS4_SLOT_TBL_DRAINING, &tbl->slot_tbl_state); spin_lock(&tbl->slot_tbl_lock); if (tbl->highest_used_slotid != NFS4_NO_SLOT) { INIT_COMPLETION(tbl->complete); @@ -275,13 +275,12 @@ static int nfs4_begin_drain_session(struct nfs_client *clp) struct nfs4_session *ses = clp->cl_session; int ret = 0; - set_bit(NFS4_SESSION_DRAINING, &ses->session_state); /* back channel */ - ret = nfs4_wait_on_slot_tbl(&ses->bc_slot_table); + ret = nfs4_drain_slot_tbl(&ses->bc_slot_table); if (ret) return ret; /* fore channel */ - return nfs4_wait_on_slot_tbl(&ses->fc_slot_table); + return nfs4_drain_slot_tbl(&ses->fc_slot_table); } static void nfs41_finish_session_reset(struct nfs_client *clp) -- cgit v1.2.3 From be646c2d2ba8e2e56596d72633705f8286698c25 Mon Sep 17 00:00:00 2001 From: Joern Engel Date: Wed, 15 May 2013 00:44:07 -0700 Subject: target: Remove unused wait_for_tasks bit in target_wait_for_sess_cmds Drop unused transport_wait_for_tasks() check in target_wait_for_sess_cmds shutdown code, and convert tcm_qla2xxx + ib_srpt fabric drivers. Cc: Joern Engel Cc: Roland Dreier Signed-off-by: Nicholas Bellinger --- drivers/infiniband/ulp/srpt/ib_srpt.c | 2 +- drivers/scsi/qla2xxx/tcm_qla2xxx.c | 2 +- drivers/target/target_core_transport.c | 28 +++++----------------------- include/target/target_core_fabric.h | 2 +- 4 files changed, 8 insertions(+), 26 deletions(-) diff --git a/drivers/infiniband/ulp/srpt/ib_srpt.c b/drivers/infiniband/ulp/srpt/ib_srpt.c index b08ca7a9f76b..564024e0123a 100644 --- a/drivers/infiniband/ulp/srpt/ib_srpt.c +++ b/drivers/infiniband/ulp/srpt/ib_srpt.c @@ -2328,7 +2328,7 @@ static void srpt_release_channel_work(struct work_struct *w) se_sess = ch->sess; BUG_ON(!se_sess); - target_wait_for_sess_cmds(se_sess, 0); + target_wait_for_sess_cmds(se_sess); transport_deregister_session_configfs(se_sess); transport_deregister_session(se_sess); diff --git a/drivers/scsi/qla2xxx/tcm_qla2xxx.c b/drivers/scsi/qla2xxx/tcm_qla2xxx.c index d182c96e17ea..7a3870f385f6 100644 --- a/drivers/scsi/qla2xxx/tcm_qla2xxx.c +++ b/drivers/scsi/qla2xxx/tcm_qla2xxx.c @@ -1370,7 +1370,7 @@ static void tcm_qla2xxx_free_session(struct qla_tgt_sess *sess) dump_stack(); return; } - target_wait_for_sess_cmds(se_sess, 0); + target_wait_for_sess_cmds(se_sess); transport_deregister_session_configfs(sess->se_sess); transport_deregister_session(sess->se_sess); diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c index 4a793362309d..311c11349aab 100644 --- a/drivers/target/target_core_transport.c +++ b/drivers/target/target_core_transport.c @@ -2263,14 +2263,10 @@ EXPORT_SYMBOL(target_sess_cmd_list_set_waiting); /* target_wait_for_sess_cmds - Wait for outstanding descriptors * @se_sess: session to wait for active I/O - * @wait_for_tasks: Make extra transport_wait_for_tasks call */ -void target_wait_for_sess_cmds( - struct se_session *se_sess, - int wait_for_tasks) +void target_wait_for_sess_cmds(struct se_session *se_sess) { struct se_cmd *se_cmd, *tmp_cmd; - bool rc = false; list_for_each_entry_safe(se_cmd, tmp_cmd, &se_sess->sess_cmd_list, se_cmd_list) { @@ -2280,24 +2276,10 @@ void target_wait_for_sess_cmds( " %d\n", se_cmd, se_cmd->t_state, se_cmd->se_tfo->get_cmd_state(se_cmd)); - if (wait_for_tasks) { - pr_debug("Calling transport_wait_for_tasks se_cmd: %p t_state: %d," - " fabric state: %d\n", se_cmd, se_cmd->t_state, - se_cmd->se_tfo->get_cmd_state(se_cmd)); - - rc = transport_wait_for_tasks(se_cmd); - - pr_debug("After transport_wait_for_tasks se_cmd: %p t_state: %d," - " fabric state: %d\n", se_cmd, se_cmd->t_state, - se_cmd->se_tfo->get_cmd_state(se_cmd)); - } - - if (!rc) { - wait_for_completion(&se_cmd->cmd_wait_comp); - pr_debug("After cmd_wait_comp: se_cmd: %p t_state: %d" - " fabric state: %d\n", se_cmd, se_cmd->t_state, - se_cmd->se_tfo->get_cmd_state(se_cmd)); - } + wait_for_completion(&se_cmd->cmd_wait_comp); + pr_debug("After cmd_wait_comp: se_cmd: %p t_state: %d" + " fabric state: %d\n", se_cmd, se_cmd->t_state, + se_cmd->se_tfo->get_cmd_state(se_cmd)); se_cmd->se_tfo->release_cmd(se_cmd); } diff --git a/include/target/target_core_fabric.h b/include/target/target_core_fabric.h index ba3471b73c07..8a26f0d55fd1 100644 --- a/include/target/target_core_fabric.h +++ b/include/target/target_core_fabric.h @@ -123,7 +123,7 @@ int transport_send_check_condition_and_sense(struct se_cmd *, int target_get_sess_cmd(struct se_session *, struct se_cmd *, bool); int target_put_sess_cmd(struct se_session *, struct se_cmd *); void target_sess_cmd_list_set_waiting(struct se_session *); -void target_wait_for_sess_cmds(struct se_session *, int); +void target_wait_for_sess_cmds(struct se_session *); int core_alua_check_nonop_delay(struct se_cmd *); -- cgit v1.2.3 From 7e94984495dbce182260fa3dd15687439236b0a1 Mon Sep 17 00:00:00 2001 From: Lucas Stach Date: Mon, 6 May 2013 15:11:10 -0600 Subject: clk: tegra: remove USB from clk init table The USB clocks are just clock gates, so no need to set a specific clock. In fact trying to set a specific clock is just a NOP if the requested clockrate is the same as those of the parent (clk_m) or will trigger a WARN_ON() if rates don't match up. As we are not setting a specific rate, nor activating the clocks at init, there is no point in keeping the the usb entries in the clock init table. Signed-off-by: Lucas Stach Acked-by: Peter De Schrijver Reviewed-by: Prashant Gaikwad Acked-by: Mike Turquette Tested-by: Stephen Warren Signed-off-by: Stephen Warren Signed-off-by: Olof Johansson --- drivers/clk/tegra/clk-tegra20.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/drivers/clk/tegra/clk-tegra20.c b/drivers/clk/tegra/clk-tegra20.c index 8292a00c3de9..d80c7cc23581 100644 --- a/drivers/clk/tegra/clk-tegra20.c +++ b/drivers/clk/tegra/clk-tegra20.c @@ -1234,9 +1234,6 @@ static __initdata struct tegra_clk_init_table init_table[] = { {uartc, pll_p, 0, 0}, {uartd, pll_p, 0, 0}, {uarte, pll_p, 0, 0}, - {usbd, clk_max, 12000000, 0}, - {usb2, clk_max, 12000000, 0}, - {usb3, clk_max, 12000000, 0}, {pll_a, clk_max, 56448000, 1}, {pll_a_out0, clk_max, 11289600, 1}, {cdev1, clk_max, 0, 1}, -- cgit v1.2.3 From 6ec3240047ee6a4b34f90d45e19ed179bc9b4a2e Mon Sep 17 00:00:00 2001 From: Lucas Stach Date: Mon, 6 May 2013 15:11:11 -0600 Subject: clk: tegra: add ac97 controller clock AC97 controller clock is hardwired to pll_a_out0. Signed-off-by: Lucas Stach Acked-by: Peter De Schrijver Reviewed-by: Prashant Gaikwad Acked-by: Mike Turquette Tested-by: Stephen Warren Signed-off-by: Stephen Warren Signed-off-by: Olof Johansson --- drivers/clk/tegra/clk-tegra20.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/clk/tegra/clk-tegra20.c b/drivers/clk/tegra/clk-tegra20.c index d80c7cc23581..075db0c99edb 100644 --- a/drivers/clk/tegra/clk-tegra20.c +++ b/drivers/clk/tegra/clk-tegra20.c @@ -872,6 +872,14 @@ static void __init tegra20_periph_clk_init(void) struct clk *clk; int i; + /* ac97 */ + clk = tegra_clk_register_periph_gate("ac97", "pll_a_out0", + TEGRA_PERIPH_ON_APB, + clk_base, 0, 3, &periph_l_regs, + periph_clk_enb_refcnt); + clk_register_clkdev(clk, NULL, "tegra20-ac97"); + clks[ac97] = clk; + /* apbdma */ clk = tegra_clk_register_periph_gate("apbdma", "pclk", 0, clk_base, 0, 34, &periph_h_regs, -- cgit v1.2.3 From 9f8466c6e09e62a1d047f2e57d90cd42e46b35c1 Mon Sep 17 00:00:00 2001 From: Srinivas Kandagatla Date: Fri, 17 May 2013 08:44:17 +0100 Subject: ARM: vt8500: Add missing NULL terminator in dt_compat When I tried booting a stih415 Dual core A9 with multi_v7_defconfig, it failed to boot. The issues seems to be changing by enabling or disabling VT8550 platform. Having a quick look at dt_compat list, it seems to miss a NULL terminator, which means of_flat_dt_match will compat check will cross the boundary of dt_compat and fault at some point , which is what was happening in my case. Without this patch if we try to boot multi_v7_defconfig you might notice that some of the platforms might fault if they fall after vt8500 in machine-desc list. Other platforms which fall before vt8500 in mdesc list will not fault. Signed-off-by: Srinivas Kandagatla Acked-by: Tony Prisk Signed-off-by: Olof Johansson --- arch/arm/mach-vt8500/vt8500.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/mach-vt8500/vt8500.c b/arch/arm/mach-vt8500/vt8500.c index 1dd281efc020..f5c33df7a597 100644 --- a/arch/arm/mach-vt8500/vt8500.c +++ b/arch/arm/mach-vt8500/vt8500.c @@ -173,6 +173,7 @@ static const char * const vt8500_dt_compat[] = { "wm,wm8505", "wm,wm8750", "wm,wm8850", + NULL }; DT_MACHINE_START(WMT_DT, "VIA/Wondermedia SoC (Device Tree Support)") -- cgit v1.2.3 From b98da4db297bad34a5577df36ff4cb2a8fc90923 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Sun, 19 May 2013 00:47:39 +0200 Subject: ARM: nomadik: fix IRQ assignment for SMC ethernet The assignment of IRQ for the SMC91x ethernet adapter had two problems making it non-working: - It was not put into the ethernet device node. Let's do this by using the board-specific overlay, so we can make other overlays on other Nomadik boards. - The IRQ number was actually completely wrong, this was the number for NHK8815, not S8815. After this ethernet starts working on the USB S8815. Signed-off-by: Linus Walleij Signed-off-by: Olof Johansson --- arch/arm/boot/dts/ste-nomadik-s8815.dts | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) diff --git a/arch/arm/boot/dts/ste-nomadik-s8815.dts b/arch/arm/boot/dts/ste-nomadik-s8815.dts index b28fbf3408e3..6f82d9368948 100644 --- a/arch/arm/boot/dts/ste-nomadik-s8815.dts +++ b/arch/arm/boot/dts/ste-nomadik-s8815.dts @@ -14,13 +14,19 @@ bootargs = "root=/dev/ram0 console=ttyAMA1,115200n8 earlyprintk"; }; + /* This is where the interrupt is routed on the S8815 board */ + external-bus@34000000 { + ethernet@300 { + interrupt-parent = <&gpio3>; + interrupts = <8 0x1>; + }; + }; + /* Custom board node with GPIO pins to active etc */ usb-s8815 { /* The S8815 is using this very GPIO pin for the SMSC91x IRQs */ ethernet-gpio { - gpios = <&gpio3 19 0x1>; - interrupts = <19 0x1>; - interrupt-parent = <&gpio3>; + gpios = <&gpio3 8 0x1>; }; /* This will bias the MMC/SD card detect line */ mmcsd-gpio { -- cgit v1.2.3 From 8d9849b05154ff6f19f538c2d094ea0f32981bb0 Mon Sep 17 00:00:00 2001 From: Alexandre Courbot Date: Mon, 20 May 2013 13:07:19 -0600 Subject: ARM: tegra: defconfig fixes The AK8975 Kconfig option was renamed during the 3.10 merge window. Adjust tegra_defconfig to enable the new name, so it's not missing useful features. Tegra DRM support used to be enabled in the default Tegra configuration, but it now depends on CONFIG_TEGRA_HOST1X which is disabled by default. Enable CONFIG_TEGRA_HOST1X so that DRM support is compiled in again. Signed-off-by: Alexandre Courbot [swarren, squashed Alex's and my changes together] Signed-off-by: Stephen Warren Signed-off-by: Olof Johansson --- arch/arm/configs/tegra_defconfig | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/arm/configs/tegra_defconfig b/arch/arm/configs/tegra_defconfig index a5f0485133cf..f7ba316164d4 100644 --- a/arch/arm/configs/tegra_defconfig +++ b/arch/arm/configs/tegra_defconfig @@ -153,6 +153,7 @@ CONFIG_MEDIA_CAMERA_SUPPORT=y CONFIG_MEDIA_USB_SUPPORT=y CONFIG_USB_VIDEO_CLASS=m CONFIG_DRM=y +CONFIG_TEGRA_HOST1X=y CONFIG_DRM_TEGRA=y CONFIG_BACKLIGHT_LCD_SUPPORT=y # CONFIG_LCD_CLASS_DEVICE is not set @@ -202,7 +203,7 @@ CONFIG_TEGRA20_APB_DMA=y CONFIG_STAGING=y CONFIG_SENSORS_ISL29018=y CONFIG_SENSORS_ISL29028=y -CONFIG_SENSORS_AK8975=y +CONFIG_AK8975=y CONFIG_MFD_NVEC=y CONFIG_KEYBOARD_NVEC=y CONFIG_SERIO_NVEC_PS2=y -- cgit v1.2.3 From bbb013b9200f0d860d2b353d47cc7b9f8f75fc8b Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Sun, 12 May 2013 13:03:56 +0200 Subject: amd64_edac: Fix bogus sysfs file permissions Fix yet another issue caught by 8f46baaa7ec6c ("base: core: WARN() about bogus permissions on device attributes"). Signed-off-by: Borislav Petkov --- drivers/edac/amd64_edac_inj.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/edac/amd64_edac_inj.c b/drivers/edac/amd64_edac_inj.c index 8c171fa1cb9b..845f04786c2d 100644 --- a/drivers/edac/amd64_edac_inj.c +++ b/drivers/edac/amd64_edac_inj.c @@ -202,9 +202,9 @@ static DEVICE_ATTR(inject_word, S_IRUGO | S_IWUSR, amd64_inject_word_show, amd64_inject_word_store); static DEVICE_ATTR(inject_ecc_vector, S_IRUGO | S_IWUSR, amd64_inject_ecc_vector_show, amd64_inject_ecc_vector_store); -static DEVICE_ATTR(inject_write, S_IRUGO | S_IWUSR, +static DEVICE_ATTR(inject_write, S_IWUSR, NULL, amd64_inject_write_store); -static DEVICE_ATTR(inject_read, S_IRUGO | S_IWUSR, +static DEVICE_ATTR(inject_read, S_IWUSR, NULL, amd64_inject_read_store); -- cgit v1.2.3 From 7c055881de33b5d8ebb6d12150eaf338a0546199 Mon Sep 17 00:00:00 2001 From: Paul Bolle Date: Sun, 12 May 2013 23:21:24 +0200 Subject: NFC: Remove commented out LLCP related Makefile line The Kconfig symbol NFC_LLCP was removed in commit 30cc458765 ("NFC: Move LLCP code to the NFC top level diirectory"). But the reference to its macro in this Makefile was only commented out. Remove it now. Signed-off-by: Paul Bolle Signed-off-by: Samuel Ortiz --- net/nfc/Makefile | 1 - 1 file changed, 1 deletion(-) diff --git a/net/nfc/Makefile b/net/nfc/Makefile index fb799deaed4f..a76f4533cb6c 100644 --- a/net/nfc/Makefile +++ b/net/nfc/Makefile @@ -5,7 +5,6 @@ obj-$(CONFIG_NFC) += nfc.o obj-$(CONFIG_NFC_NCI) += nci/ obj-$(CONFIG_NFC_HCI) += hci/ -#obj-$(CONFIG_NFC_LLCP) += llcp/ nfc-objs := core.o netlink.o af_nfc.o rawsock.o llcp_core.o llcp_commands.o \ llcp_sock.o -- cgit v1.2.3 From d999e4db0ac409c582cb15e6b120241ed9105064 Mon Sep 17 00:00:00 2001 From: Samuel Ortiz Date: Tue, 30 Apr 2013 23:22:34 +0200 Subject: NFC: mei_phy depends on INTEL_MEI INTEL_MEI_BUS_NFC never made it upstream, so make it depend on INTEL_MEI. Signed-off-by: Samuel Ortiz --- drivers/nfc/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/nfc/Kconfig b/drivers/nfc/Kconfig index 4775d4e61b88..74a852e4e41f 100644 --- a/drivers/nfc/Kconfig +++ b/drivers/nfc/Kconfig @@ -28,7 +28,7 @@ config NFC_WILINK config NFC_MEI_PHY tristate "MEI bus NFC device support" - depends on INTEL_MEI_BUS_NFC && NFC_HCI + depends on INTEL_MEI && NFC_HCI help This adds support to use an mei bus nfc device. Select this if you will use an HCI NFC driver for an NFC chip connected behind an -- cgit v1.2.3 From 73f3adb9b91efac04e4e7f8379a85400fc57121e Mon Sep 17 00:00:00 2001 From: Samuel Ortiz Date: Tue, 30 Apr 2013 23:48:50 +0200 Subject: NFC: mei_phy: Register event callback when enabling the device The callback registration starts a waiting read, so it needs to be fired everytime the device is enabled. Otherwise following writes will never get an answer back. Signed-off-by: Samuel Ortiz --- drivers/nfc/mei_phy.c | 9 +++++++++ drivers/nfc/microread/mei.c | 18 +++++------------- drivers/nfc/pn544/mei.c | 18 +++++------------- 3 files changed, 19 insertions(+), 26 deletions(-) diff --git a/drivers/nfc/mei_phy.c b/drivers/nfc/mei_phy.c index b8f8abc422f0..1201bdbfb791 100644 --- a/drivers/nfc/mei_phy.c +++ b/drivers/nfc/mei_phy.c @@ -64,6 +64,15 @@ int nfc_mei_phy_enable(void *phy_id) return r; } + r = mei_cl_register_event_cb(phy->device, nfc_mei_event_cb, phy); + if (r) { + pr_err("MEY_PHY: Event cb registration failed\n"); + mei_cl_disable_device(phy->device); + phy->powered = 0; + + return r; + } + phy->powered = 1; return 0; diff --git a/drivers/nfc/microread/mei.c b/drivers/nfc/microread/mei.c index 1ad044dce7b6..51d44fb18be9 100644 --- a/drivers/nfc/microread/mei.c +++ b/drivers/nfc/microread/mei.c @@ -43,24 +43,16 @@ static int microread_mei_probe(struct mei_cl_device *device, return -ENOMEM; } - r = mei_cl_register_event_cb(device, nfc_mei_event_cb, phy); - if (r) { - pr_err(MICROREAD_DRIVER_NAME ": event cb registration failed\n"); - goto err_out; - } - r = microread_probe(phy, &mei_phy_ops, LLC_NOP_NAME, MEI_NFC_HEADER_SIZE, 0, MEI_NFC_MAX_HCI_PAYLOAD, &phy->hdev); - if (r < 0) - goto err_out; - - return 0; + if (r < 0) { + nfc_mei_phy_free(phy); -err_out: - nfc_mei_phy_free(phy); + return r; + } - return r; + return 0; } static int microread_mei_remove(struct mei_cl_device *device) diff --git a/drivers/nfc/pn544/mei.c b/drivers/nfc/pn544/mei.c index 1eb48848a35a..50cef3a574b5 100644 --- a/drivers/nfc/pn544/mei.c +++ b/drivers/nfc/pn544/mei.c @@ -43,24 +43,16 @@ static int pn544_mei_probe(struct mei_cl_device *device, return -ENOMEM; } - r = mei_cl_register_event_cb(device, nfc_mei_event_cb, phy); - if (r) { - pr_err(PN544_DRIVER_NAME ": event cb registration failed\n"); - goto err_out; - } - r = pn544_hci_probe(phy, &mei_phy_ops, LLC_NOP_NAME, MEI_NFC_HEADER_SIZE, 0, MEI_NFC_MAX_HCI_PAYLOAD, &phy->hdev); - if (r < 0) - goto err_out; - - return 0; + if (r < 0) { + nfc_mei_phy_free(phy); -err_out: - nfc_mei_phy_free(phy); + return r; + } - return r; + return 0; } static int pn544_mei_remove(struct mei_cl_device *device) -- cgit v1.2.3 From e3a6b14ceda0207c3405c6266e5177a85c0db044 Mon Sep 17 00:00:00 2001 From: Samuel Ortiz Date: Tue, 30 Apr 2013 23:50:29 +0200 Subject: NFC: mei: Do not disable MEI devices from their remove routine Enabling and disabling device is exclusively handled by the mei_phy_ops. Signed-off-by: Samuel Ortiz --- drivers/nfc/microread/mei.c | 2 -- drivers/nfc/pn544/mei.c | 2 -- 2 files changed, 4 deletions(-) diff --git a/drivers/nfc/microread/mei.c b/drivers/nfc/microread/mei.c index 51d44fb18be9..cdf1bc53b257 100644 --- a/drivers/nfc/microread/mei.c +++ b/drivers/nfc/microread/mei.c @@ -63,8 +63,6 @@ static int microread_mei_remove(struct mei_cl_device *device) microread_remove(phy->hdev); - nfc_mei_phy_disable(phy); - nfc_mei_phy_free(phy); return 0; diff --git a/drivers/nfc/pn544/mei.c b/drivers/nfc/pn544/mei.c index 50cef3a574b5..b5d3d18179eb 100644 --- a/drivers/nfc/pn544/mei.c +++ b/drivers/nfc/pn544/mei.c @@ -63,8 +63,6 @@ static int pn544_mei_remove(struct mei_cl_device *device) pn544_hci_remove(phy->hdev); - nfc_mei_phy_disable(phy); - nfc_mei_phy_free(phy); return 0; -- cgit v1.2.3 From 1c98b4871cca4b7ce07e19f92f934d47cf7210b0 Mon Sep 17 00:00:00 2001 From: Rodrigo Vivi Date: Mon, 13 May 2013 18:12:25 -0300 Subject: drm/i915: Adding more reserved PCI IDs for Haswell. At DDX commit Chris mentioned the tendency we have of finding out more PCI IDs only when users report. So Let's add all new reserved Haswell IDs. This patch also fix GT3 names. I'no not sending in separated patche because names are only in few comments and not in variable names. v2: Fix some mobile ids (by Paulo) References: http://bugs.freedesktop.org/show_bug.cgi?id=63701 Cc: Chris Wilson Cc: Paulo Zanoni Signed-off-by: Rodrigo Vivi Cc: stable@vger.kernel.org Reviewed-by: Paulo Zanoni Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/i915_drv.c | 46 +++++++++++++++++++++++++++++++---------- 1 file changed, 35 insertions(+), 11 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c index 9ebe895c17d6..a2e4953b8e8d 100644 --- a/drivers/gpu/drm/i915/i915_drv.c +++ b/drivers/gpu/drm/i915/i915_drv.c @@ -364,40 +364,64 @@ static const struct pci_device_id pciidlist[] = { /* aka */ INTEL_VGA_DEVICE(0x016a, &intel_ivybridge_d_info), /* GT2 server */ INTEL_VGA_DEVICE(0x0402, &intel_haswell_d_info), /* GT1 desktop */ INTEL_VGA_DEVICE(0x0412, &intel_haswell_d_info), /* GT2 desktop */ - INTEL_VGA_DEVICE(0x0422, &intel_haswell_d_info), /* GT2 desktop */ + INTEL_VGA_DEVICE(0x0422, &intel_haswell_d_info), /* GT3 desktop */ INTEL_VGA_DEVICE(0x040a, &intel_haswell_d_info), /* GT1 server */ INTEL_VGA_DEVICE(0x041a, &intel_haswell_d_info), /* GT2 server */ - INTEL_VGA_DEVICE(0x042a, &intel_haswell_d_info), /* GT2 server */ + INTEL_VGA_DEVICE(0x042a, &intel_haswell_d_info), /* GT3 server */ INTEL_VGA_DEVICE(0x0406, &intel_haswell_m_info), /* GT1 mobile */ INTEL_VGA_DEVICE(0x0416, &intel_haswell_m_info), /* GT2 mobile */ INTEL_VGA_DEVICE(0x0426, &intel_haswell_m_info), /* GT2 mobile */ + INTEL_VGA_DEVICE(0x040B, &intel_haswell_d_info), /* GT1 reserved */ + INTEL_VGA_DEVICE(0x041B, &intel_haswell_d_info), /* GT2 reserved */ + INTEL_VGA_DEVICE(0x042B, &intel_haswell_d_info), /* GT3 reserved */ + INTEL_VGA_DEVICE(0x040E, &intel_haswell_d_info), /* GT1 reserved */ + INTEL_VGA_DEVICE(0x041E, &intel_haswell_d_info), /* GT2 reserved */ + INTEL_VGA_DEVICE(0x042E, &intel_haswell_d_info), /* GT3 reserved */ INTEL_VGA_DEVICE(0x0C02, &intel_haswell_d_info), /* SDV GT1 desktop */ INTEL_VGA_DEVICE(0x0C12, &intel_haswell_d_info), /* SDV GT2 desktop */ - INTEL_VGA_DEVICE(0x0C22, &intel_haswell_d_info), /* SDV GT2 desktop */ + INTEL_VGA_DEVICE(0x0C22, &intel_haswell_d_info), /* SDV GT3 desktop */ INTEL_VGA_DEVICE(0x0C0A, &intel_haswell_d_info), /* SDV GT1 server */ INTEL_VGA_DEVICE(0x0C1A, &intel_haswell_d_info), /* SDV GT2 server */ - INTEL_VGA_DEVICE(0x0C2A, &intel_haswell_d_info), /* SDV GT2 server */ + INTEL_VGA_DEVICE(0x0C2A, &intel_haswell_d_info), /* SDV GT3 server */ INTEL_VGA_DEVICE(0x0C06, &intel_haswell_m_info), /* SDV GT1 mobile */ INTEL_VGA_DEVICE(0x0C16, &intel_haswell_m_info), /* SDV GT2 mobile */ - INTEL_VGA_DEVICE(0x0C26, &intel_haswell_m_info), /* SDV GT2 mobile */ + INTEL_VGA_DEVICE(0x0C26, &intel_haswell_m_info), /* SDV GT3 mobile */ + INTEL_VGA_DEVICE(0x0C0B, &intel_haswell_d_info), /* SDV GT1 reserved */ + INTEL_VGA_DEVICE(0x0C1B, &intel_haswell_d_info), /* SDV GT2 reserved */ + INTEL_VGA_DEVICE(0x0C2B, &intel_haswell_d_info), /* SDV GT3 reserved */ + INTEL_VGA_DEVICE(0x0C0E, &intel_haswell_d_info), /* SDV GT1 reserved */ + INTEL_VGA_DEVICE(0x0C1E, &intel_haswell_d_info), /* SDV GT2 reserved */ + INTEL_VGA_DEVICE(0x0C2E, &intel_haswell_d_info), /* SDV GT3 reserved */ INTEL_VGA_DEVICE(0x0A02, &intel_haswell_d_info), /* ULT GT1 desktop */ INTEL_VGA_DEVICE(0x0A12, &intel_haswell_d_info), /* ULT GT2 desktop */ - INTEL_VGA_DEVICE(0x0A22, &intel_haswell_d_info), /* ULT GT2 desktop */ + INTEL_VGA_DEVICE(0x0A22, &intel_haswell_d_info), /* ULT GT3 desktop */ INTEL_VGA_DEVICE(0x0A0A, &intel_haswell_d_info), /* ULT GT1 server */ INTEL_VGA_DEVICE(0x0A1A, &intel_haswell_d_info), /* ULT GT2 server */ - INTEL_VGA_DEVICE(0x0A2A, &intel_haswell_d_info), /* ULT GT2 server */ + INTEL_VGA_DEVICE(0x0A2A, &intel_haswell_d_info), /* ULT GT3 server */ INTEL_VGA_DEVICE(0x0A06, &intel_haswell_m_info), /* ULT GT1 mobile */ INTEL_VGA_DEVICE(0x0A16, &intel_haswell_m_info), /* ULT GT2 mobile */ - INTEL_VGA_DEVICE(0x0A26, &intel_haswell_m_info), /* ULT GT2 mobile */ + INTEL_VGA_DEVICE(0x0A26, &intel_haswell_m_info), /* ULT GT3 mobile */ + INTEL_VGA_DEVICE(0x0A0B, &intel_haswell_d_info), /* ULT GT1 reserved */ + INTEL_VGA_DEVICE(0x0A1B, &intel_haswell_d_info), /* ULT GT2 reserved */ + INTEL_VGA_DEVICE(0x0A2B, &intel_haswell_d_info), /* ULT GT3 reserved */ + INTEL_VGA_DEVICE(0x0A0E, &intel_haswell_m_info), /* ULT GT1 reserved */ + INTEL_VGA_DEVICE(0x0A1E, &intel_haswell_m_info), /* ULT GT2 reserved */ + INTEL_VGA_DEVICE(0x0A2E, &intel_haswell_m_info), /* ULT GT3 reserved */ INTEL_VGA_DEVICE(0x0D02, &intel_haswell_d_info), /* CRW GT1 desktop */ INTEL_VGA_DEVICE(0x0D12, &intel_haswell_d_info), /* CRW GT2 desktop */ - INTEL_VGA_DEVICE(0x0D22, &intel_haswell_d_info), /* CRW GT2 desktop */ + INTEL_VGA_DEVICE(0x0D22, &intel_haswell_d_info), /* CRW GT3 desktop */ INTEL_VGA_DEVICE(0x0D0A, &intel_haswell_d_info), /* CRW GT1 server */ INTEL_VGA_DEVICE(0x0D1A, &intel_haswell_d_info), /* CRW GT2 server */ - INTEL_VGA_DEVICE(0x0D2A, &intel_haswell_d_info), /* CRW GT2 server */ + INTEL_VGA_DEVICE(0x0D2A, &intel_haswell_d_info), /* CRW GT3 server */ INTEL_VGA_DEVICE(0x0D06, &intel_haswell_m_info), /* CRW GT1 mobile */ INTEL_VGA_DEVICE(0x0D16, &intel_haswell_m_info), /* CRW GT2 mobile */ - INTEL_VGA_DEVICE(0x0D26, &intel_haswell_m_info), /* CRW GT2 mobile */ + INTEL_VGA_DEVICE(0x0D26, &intel_haswell_m_info), /* CRW GT3 mobile */ + INTEL_VGA_DEVICE(0x0D0B, &intel_haswell_d_info), /* CRW GT1 reserved */ + INTEL_VGA_DEVICE(0x0D1B, &intel_haswell_d_info), /* CRW GT2 reserved */ + INTEL_VGA_DEVICE(0x0D2B, &intel_haswell_d_info), /* CRW GT3 reserved */ + INTEL_VGA_DEVICE(0x0D0E, &intel_haswell_d_info), /* CRW GT1 reserved */ + INTEL_VGA_DEVICE(0x0D1E, &intel_haswell_d_info), /* CRW GT2 reserved */ + INTEL_VGA_DEVICE(0x0D2E, &intel_haswell_d_info), /* CRW GT3 reserved */ INTEL_VGA_DEVICE(0x0f30, &intel_valleyview_m_info), INTEL_VGA_DEVICE(0x0f31, &intel_valleyview_m_info), INTEL_VGA_DEVICE(0x0f32, &intel_valleyview_m_info), -- cgit v1.2.3 From 2d05eae1c92f93ace0fc6f282c55527d293297dd Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Fri, 3 May 2013 17:36:25 +0100 Subject: drm/i915: Propagate errors back from fb set-base Along the modesetting short cut where we skip trying to do a full modeset and instead simply update the framebuffer base registers, we failed to handle any errors reported. This regression has been introduced in commit 94352cf9a5328bb1a44288e6c2c1276695f8a356 Author: Daniel Vetter Date: Thu Jul 5 22:51:56 2012 +0200 drm/i915: push crtc->fb update into pipe_set_base Signed-off-by: Chris Wilson Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_display.c | 25 ++++++++++--------------- 1 file changed, 10 insertions(+), 15 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index efe829919755..300942a7d144 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -8332,11 +8332,6 @@ static int intel_crtc_set_config(struct drm_mode_set *set) ret = intel_set_mode(set->crtc, set->mode, set->x, set->y, set->fb); - if (ret) { - DRM_ERROR("failed to set mode on [CRTC:%d], err = %d\n", - set->crtc->base.id, ret); - goto fail; - } } else if (config->fb_changed) { intel_crtc_wait_for_pending_flips(set->crtc); @@ -8344,18 +8339,18 @@ static int intel_crtc_set_config(struct drm_mode_set *set) set->x, set->y, set->fb); } - intel_set_config_free(config); - - return 0; - + if (ret) { + DRM_ERROR("failed to set mode on [CRTC:%d], err = %d\n", + set->crtc->base.id, ret); fail: - intel_set_config_restore_state(dev, config); + intel_set_config_restore_state(dev, config); - /* Try to restore the config */ - if (config->mode_changed && - intel_set_mode(save_set.crtc, save_set.mode, - save_set.x, save_set.y, save_set.fb)) - DRM_ERROR("failed to restore config after modeset failure\n"); + /* Try to restore the config */ + if (config->mode_changed && + intel_set_mode(save_set.crtc, save_set.mode, + save_set.x, save_set.y, save_set.fb)) + DRM_ERROR("failed to restore config after modeset failure\n"); + } out_config: intel_set_config_free(config); -- cgit v1.2.3 From ce0d10f887cabf9f16d1cbb60ef013021befbfdf Mon Sep 17 00:00:00 2001 From: Charles Keepax Date: Tue, 21 May 2013 15:04:07 +0100 Subject: regulator: core: Correct spelling mistake in comment Signed-off-by: Charles Keepax Signed-off-by: Mark Brown --- drivers/regulator/core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index 6e5017841582..5e50b20f0f96 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -2702,7 +2702,7 @@ EXPORT_SYMBOL_GPL(regulator_get_voltage); /** * regulator_set_current_limit - set regulator output current limit * @regulator: regulator source - * @min_uA: Minimuum supported current in uA + * @min_uA: Minimum supported current in uA * @max_uA: Maximum supported current in uA * * Sets current sink to the desired output current. This can be set during -- cgit v1.2.3 From 796718925159523919a589ecbd6d1811c22ef55f Mon Sep 17 00:00:00 2001 From: Daniel Mack Date: Thu, 16 May 2013 15:25:01 +0200 Subject: ASoC: davinci: fix sample rotation McASP serial audio engine needs different rotation values on TX and RX channels. Commit dde109fb462 ("ASoC: McASP: Fix data rotation for playback. Enables 24bit audio playback") changed the calculation to fix the playback format, but broke the capture stream by doing it for both TXFMT and RXFMT. Signed-off-by: Daniel Mack Signed-off-by: Mark Brown Cc: stable@vger.kernel.org [3.9 only] --- sound/soc/davinci/davinci-mcasp.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/sound/soc/davinci/davinci-mcasp.c b/sound/soc/davinci/davinci-mcasp.c index 56ecfc72f2e9..81490febac6d 100644 --- a/sound/soc/davinci/davinci-mcasp.c +++ b/sound/soc/davinci/davinci-mcasp.c @@ -631,7 +631,8 @@ static int davinci_config_channel_size(struct davinci_audio_dev *dev, int word_length) { u32 fmt; - u32 rotate = (word_length / 4) & 0x7; + u32 tx_rotate = (word_length / 4) & 0x7; + u32 rx_rotate = (32 - word_length) / 4; u32 mask = (1ULL << word_length) - 1; /* @@ -655,9 +656,9 @@ static int davinci_config_channel_size(struct davinci_audio_dev *dev, mcasp_mod_bits(dev->base + DAVINCI_MCASP_TXFMT_REG, TXSSZ(fmt), TXSSZ(0x0F)); mcasp_mod_bits(dev->base + DAVINCI_MCASP_TXFMT_REG, - TXROT(rotate), TXROT(7)); + TXROT(tx_rotate), TXROT(7)); mcasp_mod_bits(dev->base + DAVINCI_MCASP_RXFMT_REG, - RXROT(rotate), RXROT(7)); + RXROT(rx_rotate), RXROT(7)); mcasp_set_reg(dev->base + DAVINCI_MCASP_RXMASK_REG, mask); } -- cgit v1.2.3 From e4f2dfbb5e92be4e46c0625f4f8eb101110f756f Mon Sep 17 00:00:00 2001 From: Mikael Pettersson Date: Fri, 8 Mar 2013 15:03:53 +0100 Subject: m68k: implement futex.h to support userspace robust futexes and PI mutexes Linux/M68K currently doesn't support robust futexes or PI mutexes. The problem is that the futex code needs to perform certain ops (cmpxchg, set, add, or, andn, xor) atomically on user-space addresses, and M68K's lack of a futex.h causes those operations to be unsupported and disabled. This patch adds that support, but only for uniprocessor machines, which is adequate for M68K. For UP it's enough to disable preemption to ensure mutual exclusion (futexes don't need to care about other hardware agents), and the mandatory pagefault_disable() does just that. This patch is closely based on the one I co-wrote for UP ARM back in August 2008. The main change is that this patch uses the C get_user/put_user accessors instead of inline assembly code with exception table fixups. For non-MMU machines the new futex.h simply redirects to the generic futex.h, so there is no functional change for them. Tested on aranym with the glibc-2.17 test suite: no regressions, and a number of mutex/condvar test cases went from failing to succeeding (tst-mutexpi{5,5a,6,9}, tst-cond2[45], tst-robust[1-9], tst-robustpi[1-8]). Also tested with glibc-2.18 HEAD and a local glibc patch to enable PI mutexes: no regressions. Signed-off-by: Mikael Pettersson Acked-by: Andreas Schwab [geert: Added removal of ""generic-y += futex.h"] Signed-off-by: Geert Uytterhoeven --- arch/m68k/include/asm/Kbuild | 1 - arch/m68k/include/asm/futex.h | 94 +++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 94 insertions(+), 1 deletion(-) create mode 100644 arch/m68k/include/asm/futex.h diff --git a/arch/m68k/include/asm/Kbuild b/arch/m68k/include/asm/Kbuild index c7933e41f10d..09d77a862da3 100644 --- a/arch/m68k/include/asm/Kbuild +++ b/arch/m68k/include/asm/Kbuild @@ -6,7 +6,6 @@ generic-y += device.h generic-y += emergency-restart.h generic-y += errno.h generic-y += exec.h -generic-y += futex.h generic-y += hw_irq.h generic-y += ioctl.h generic-y += ipcbuf.h diff --git a/arch/m68k/include/asm/futex.h b/arch/m68k/include/asm/futex.h new file mode 100644 index 000000000000..bc868af10c96 --- /dev/null +++ b/arch/m68k/include/asm/futex.h @@ -0,0 +1,94 @@ +#ifndef _ASM_M68K_FUTEX_H +#define _ASM_M68K_FUTEX_H + +#ifdef __KERNEL__ +#if !defined(CONFIG_MMU) +#include +#else /* CONFIG_MMU */ + +#include +#include +#include + +static inline int +futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr, + u32 oldval, u32 newval) +{ + u32 val; + + if (unlikely(get_user(val, uaddr) != 0)) + return -EFAULT; + + if (val == oldval && unlikely(put_user(newval, uaddr) != 0)) + return -EFAULT; + + *uval = val; + + return 0; +} + +static inline int +futex_atomic_op_inuser(int encoded_op, u32 __user *uaddr) +{ + int op = (encoded_op >> 28) & 7; + int cmp = (encoded_op >> 24) & 15; + int oparg = (encoded_op << 8) >> 20; + int cmparg = (encoded_op << 20) >> 20; + int oldval, ret; + u32 tmp; + + if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28)) + oparg = 1 << oparg; + + pagefault_disable(); /* implies preempt_disable() */ + + ret = -EFAULT; + if (unlikely(get_user(oldval, uaddr) != 0)) + goto out_pagefault_enable; + + ret = 0; + tmp = oldval; + + switch (op) { + case FUTEX_OP_SET: + tmp = oparg; + break; + case FUTEX_OP_ADD: + tmp += oparg; + break; + case FUTEX_OP_OR: + tmp |= oparg; + break; + case FUTEX_OP_ANDN: + tmp &= ~oparg; + break; + case FUTEX_OP_XOR: + tmp ^= oparg; + break; + default: + ret = -ENOSYS; + } + + if (ret == 0 && unlikely(put_user(tmp, uaddr) != 0)) + ret = -EFAULT; + +out_pagefault_enable: + pagefault_enable(); /* subsumes preempt_enable() */ + + if (ret == 0) { + switch (cmp) { + case FUTEX_OP_CMP_EQ: ret = (oldval == cmparg); break; + case FUTEX_OP_CMP_NE: ret = (oldval != cmparg); break; + case FUTEX_OP_CMP_LT: ret = (oldval < cmparg); break; + case FUTEX_OP_CMP_GE: ret = (oldval >= cmparg); break; + case FUTEX_OP_CMP_LE: ret = (oldval <= cmparg); break; + case FUTEX_OP_CMP_GT: ret = (oldval > cmparg); break; + default: ret = -ENOSYS; + } + } + return ret; +} + +#endif /* CONFIG_MMU */ +#endif /* __KERNEL__ */ +#endif /* _ASM_M68K_FUTEX_H */ -- cgit v1.2.3 From ec4602a9588a196fa1a9af46bfdd37cbf5792db4 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Thu, 16 May 2013 22:29:28 +0200 Subject: ACPI / PM: Allow device power states to be used for CONFIG_PM unset Currently, drivers/acpi/device_pm.c depends on CONFIG_PM and all of the functions defined in there are replaced with static inline stubs if that option is unset. However, CONFIG_PM means, roughly, "runtime PM or suspend/hibernation support" and some of those functions are useful regardless of that. For example, they are used by the ACPI fan driver for controlling fans and acpi_device_set_power() is called during device removal. Moreover, device initialization may depend on setting device power states properly. For these reasons, make the routines manipulating ACPI device power states defined in drivers/acpi/device_pm.c available for CONFIG_PM unset too. Reported-by: Zhang Rui Reported-and-tested-by: Michel Lespinasse Signed-off-by: Rafael J. Wysocki Cc: 3.9+ --- drivers/acpi/Makefile | 2 +- drivers/acpi/device_pm.c | 126 ++++++++++++++++++++++++----------------------- include/acpi/acpi_bus.h | 40 ++------------- 3 files changed, 70 insertions(+), 98 deletions(-) diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile index ecb743bf05a5..7cad994ee44f 100644 --- a/drivers/acpi/Makefile +++ b/drivers/acpi/Makefile @@ -24,7 +24,7 @@ acpi-y += nvs.o # Power management related files acpi-y += wakeup.o acpi-y += sleep.o -acpi-$(CONFIG_PM) += device_pm.o +acpi-y += device_pm.o acpi-$(CONFIG_ACPI_SLEEP) += proc.o diff --git a/drivers/acpi/device_pm.c b/drivers/acpi/device_pm.c index 96de787e6104..bc493aa3af19 100644 --- a/drivers/acpi/device_pm.c +++ b/drivers/acpi/device_pm.c @@ -37,68 +37,6 @@ #define _COMPONENT ACPI_POWER_COMPONENT ACPI_MODULE_NAME("device_pm"); -static DEFINE_MUTEX(acpi_pm_notifier_lock); - -/** - * acpi_add_pm_notifier - Register PM notifier for given ACPI device. - * @adev: ACPI device to add the notifier for. - * @context: Context information to pass to the notifier routine. - * - * NOTE: @adev need not be a run-wake or wakeup device to be a valid source of - * PM wakeup events. For example, wakeup events may be generated for bridges - * if one of the devices below the bridge is signaling wakeup, even if the - * bridge itself doesn't have a wakeup GPE associated with it. - */ -acpi_status acpi_add_pm_notifier(struct acpi_device *adev, - acpi_notify_handler handler, void *context) -{ - acpi_status status = AE_ALREADY_EXISTS; - - mutex_lock(&acpi_pm_notifier_lock); - - if (adev->wakeup.flags.notifier_present) - goto out; - - status = acpi_install_notify_handler(adev->handle, - ACPI_SYSTEM_NOTIFY, - handler, context); - if (ACPI_FAILURE(status)) - goto out; - - adev->wakeup.flags.notifier_present = true; - - out: - mutex_unlock(&acpi_pm_notifier_lock); - return status; -} - -/** - * acpi_remove_pm_notifier - Unregister PM notifier from given ACPI device. - * @adev: ACPI device to remove the notifier from. - */ -acpi_status acpi_remove_pm_notifier(struct acpi_device *adev, - acpi_notify_handler handler) -{ - acpi_status status = AE_BAD_PARAMETER; - - mutex_lock(&acpi_pm_notifier_lock); - - if (!adev->wakeup.flags.notifier_present) - goto out; - - status = acpi_remove_notify_handler(adev->handle, - ACPI_SYSTEM_NOTIFY, - handler); - if (ACPI_FAILURE(status)) - goto out; - - adev->wakeup.flags.notifier_present = false; - - out: - mutex_unlock(&acpi_pm_notifier_lock); - return status; -} - /** * acpi_power_state_string - String representation of ACPI device power state. * @state: ACPI device power state to return the string representation of. @@ -385,6 +323,69 @@ bool acpi_bus_power_manageable(acpi_handle handle) } EXPORT_SYMBOL(acpi_bus_power_manageable); +#ifdef CONFIG_PM +static DEFINE_MUTEX(acpi_pm_notifier_lock); + +/** + * acpi_add_pm_notifier - Register PM notifier for given ACPI device. + * @adev: ACPI device to add the notifier for. + * @context: Context information to pass to the notifier routine. + * + * NOTE: @adev need not be a run-wake or wakeup device to be a valid source of + * PM wakeup events. For example, wakeup events may be generated for bridges + * if one of the devices below the bridge is signaling wakeup, even if the + * bridge itself doesn't have a wakeup GPE associated with it. + */ +acpi_status acpi_add_pm_notifier(struct acpi_device *adev, + acpi_notify_handler handler, void *context) +{ + acpi_status status = AE_ALREADY_EXISTS; + + mutex_lock(&acpi_pm_notifier_lock); + + if (adev->wakeup.flags.notifier_present) + goto out; + + status = acpi_install_notify_handler(adev->handle, + ACPI_SYSTEM_NOTIFY, + handler, context); + if (ACPI_FAILURE(status)) + goto out; + + adev->wakeup.flags.notifier_present = true; + + out: + mutex_unlock(&acpi_pm_notifier_lock); + return status; +} + +/** + * acpi_remove_pm_notifier - Unregister PM notifier from given ACPI device. + * @adev: ACPI device to remove the notifier from. + */ +acpi_status acpi_remove_pm_notifier(struct acpi_device *adev, + acpi_notify_handler handler) +{ + acpi_status status = AE_BAD_PARAMETER; + + mutex_lock(&acpi_pm_notifier_lock); + + if (!adev->wakeup.flags.notifier_present) + goto out; + + status = acpi_remove_notify_handler(adev->handle, + ACPI_SYSTEM_NOTIFY, + handler); + if (ACPI_FAILURE(status)) + goto out; + + adev->wakeup.flags.notifier_present = false; + + out: + mutex_unlock(&acpi_pm_notifier_lock); + return status; +} + bool acpi_bus_can_wakeup(acpi_handle handle) { struct acpi_device *device; @@ -1023,3 +1024,4 @@ void acpi_dev_pm_remove_dependent(acpi_handle handle, struct device *depdev) mutex_unlock(&adev->physical_node_lock); } EXPORT_SYMBOL_GPL(acpi_dev_pm_remove_dependent); +#endif /* CONFIG_PM */ diff --git a/include/acpi/acpi_bus.h b/include/acpi/acpi_bus.h index 98db31d9f9b4..636c59f2003a 100644 --- a/include/acpi/acpi_bus.h +++ b/include/acpi/acpi_bus.h @@ -377,7 +377,6 @@ acpi_status acpi_bus_get_status_handle(acpi_handle handle, unsigned long long *sta); int acpi_bus_get_status(struct acpi_device *device); -#ifdef CONFIG_PM int acpi_bus_set_power(acpi_handle handle, int state); const char *acpi_power_state_string(int state); int acpi_device_get_power(struct acpi_device *device, int *state); @@ -385,41 +384,12 @@ int acpi_device_set_power(struct acpi_device *device, int state); int acpi_bus_init_power(struct acpi_device *device); int acpi_bus_update_power(acpi_handle handle, int *state_p); bool acpi_bus_power_manageable(acpi_handle handle); + +#ifdef CONFIG_PM bool acpi_bus_can_wakeup(acpi_handle handle); -#else /* !CONFIG_PM */ -static inline int acpi_bus_set_power(acpi_handle handle, int state) -{ - return 0; -} -static inline const char *acpi_power_state_string(int state) -{ - return "D0"; -} -static inline int acpi_device_get_power(struct acpi_device *device, int *state) -{ - return 0; -} -static inline int acpi_device_set_power(struct acpi_device *device, int state) -{ - return 0; -} -static inline int acpi_bus_init_power(struct acpi_device *device) -{ - return 0; -} -static inline int acpi_bus_update_power(acpi_handle handle, int *state_p) -{ - return 0; -} -static inline bool acpi_bus_power_manageable(acpi_handle handle) -{ - return false; -} -static inline bool acpi_bus_can_wakeup(acpi_handle handle) -{ - return false; -} -#endif /* !CONFIG_PM */ +#else +static inline bool acpi_bus_can_wakeup(acpi_handle handle) { return false; } +#endif #ifdef CONFIG_ACPI_PROC_EVENT int acpi_bus_generate_proc_event(struct acpi_device *device, u8 type, int data); -- cgit v1.2.3 From 955ef4833574636819cd269cfbae12f79cbde63a Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Thu, 16 May 2013 05:09:58 +0000 Subject: cpufreq: Drop rwsem lock around CPUFREQ_GOV_POLICY_EXIT With the rwsem lock around __cpufreq_governor(policy, CPUFREQ_GOV_POLICY_EXIT), we get circular dependency when we call sysfs_remove_group(). ====================================================== [ INFO: possible circular locking dependency detected ] 3.9.0-rc7+ #15 Not tainted ------------------------------------------------------- cat/2387 is trying to acquire lock: (&per_cpu(cpu_policy_rwsem, cpu)){+++++.}, at: [] lock_policy_rwsem_read+0x25/0x34 but task is already holding lock: (s_active#41){++++.+}, at: [] sysfs_read_file+0x4f/0xcc which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (s_active#41){++++.+}: [] lock_acquire+0x61/0xbc [] sysfs_addrm_finish+0xc1/0x128 [] sysfs_hash_and_remove+0x35/0x64 [] remove_files.isra.0+0x1b/0x24 [] sysfs_remove_group+0x2d/0xa8 [] cpufreq_governor_interactive+0x13b/0x35c [] __cpufreq_governor+0x2b/0x8c [] __cpufreq_set_policy+0xa9/0xf8 [] store_scaling_governor+0x61/0x100 [] store+0x39/0x60 [] sysfs_write_file+0xed/0x114 [] vfs_write+0x65/0xd8 [] sys_write+0x2f/0x50 [] ret_fast_syscall+0x1/0x52 -> #0 (&per_cpu(cpu_policy_rwsem, cpu)){+++++.}: [] __lock_acquire+0xef3/0x13dc [] lock_acquire+0x61/0xbc [] down_read+0x25/0x30 [] lock_policy_rwsem_read+0x25/0x34 [] show+0x21/0x58 [] sysfs_read_file+0x67/0xcc [] vfs_read+0x63/0xd8 [] sys_read+0x2f/0x50 [] ret_fast_syscall+0x1/0x52 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(s_active#41); lock(&per_cpu(cpu_policy_rwsem, cpu)); lock(s_active#41); lock(&per_cpu(cpu_policy_rwsem, cpu)); *** DEADLOCK *** 2 locks held by cat/2387: #0: (&buffer->mutex){+.+.+.}, at: [] sysfs_read_file+0x25/0xcc #1: (s_active#41){++++.+}, at: [] sysfs_read_file+0x4f/0xcc stack backtrace: [] (unwind_backtrace+0x1/0x9c) from [] (print_circular_bug+0x19d/0x1e8) [] (print_circular_bug+0x19d/0x1e8) from [] (__lock_acquire+0xef3/0x13dc) [] (__lock_acquire+0xef3/0x13dc) from [] (lock_acquire+0x61/0xbc) [] (lock_acquire+0x61/0xbc) from [] (down_read+0x25/0x30) [] (down_read+0x25/0x30) from [] (lock_policy_rwsem_read+0x25/0x34) [] (lock_policy_rwsem_read+0x25/0x34) from [] (show+0x21/0x58) [] (show+0x21/0x58) from [] (sysfs_read_file+0x67/0xcc) [] (sysfs_read_file+0x67/0xcc) from [] (vfs_read+0x63/0xd8) [] (vfs_read+0x63/0xd8) from [] (sys_read+0x2f/0x50) [] (sys_read+0x2f/0x50) from [] (ret_fast_syscall+0x1/0x52) This lock isn't required while calling __cpufreq_governor(policy, CPUFREQ_GOV_POLICY_EXIT). Remove it. Signed-off-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki --- drivers/cpufreq/cpufreq.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c index 4b8c7f297d74..2d53f47d1747 100644 --- a/drivers/cpufreq/cpufreq.c +++ b/drivers/cpufreq/cpufreq.c @@ -1729,18 +1729,23 @@ static int __cpufreq_set_policy(struct cpufreq_policy *data, /* end old governor */ if (data->governor) { __cpufreq_governor(data, CPUFREQ_GOV_STOP); + unlock_policy_rwsem_write(policy->cpu); __cpufreq_governor(data, CPUFREQ_GOV_POLICY_EXIT); + lock_policy_rwsem_write(policy->cpu); } /* start new governor */ data->governor = policy->governor; if (!__cpufreq_governor(data, CPUFREQ_GOV_POLICY_INIT)) { - if (!__cpufreq_governor(data, CPUFREQ_GOV_START)) + if (!__cpufreq_governor(data, CPUFREQ_GOV_START)) { failed = 0; - else + } else { + unlock_policy_rwsem_write(policy->cpu); __cpufreq_governor(data, CPUFREQ_GOV_POLICY_EXIT); + lock_policy_rwsem_write(policy->cpu); + } } if (failed) { -- cgit v1.2.3 From c96d53d600643ee0adfd1cb90814bd9510e62b71 Mon Sep 17 00:00:00 2001 From: Dirk Brandewie Date: Fri, 17 May 2013 16:10:24 +0000 Subject: cpufreq / intel_pstate: Add additional supported CPU ID Add CPU ID for Ivybrigde processor. Signed-off-by: Dirk Brandewie Signed-off-by: Rafael J. Wysocki --- drivers/cpufreq/intel_pstate.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/cpufreq/intel_pstate.c b/drivers/cpufreq/intel_pstate.c index 9c36ace92a39..07f2840ad805 100644 --- a/drivers/cpufreq/intel_pstate.c +++ b/drivers/cpufreq/intel_pstate.c @@ -521,6 +521,7 @@ static void intel_pstate_timer_func(unsigned long __data) static const struct x86_cpu_id intel_pstate_cpu_ids[] = { ICPU(0x2a, default_policy), ICPU(0x2d, default_policy), + ICPU(0x3a, default_policy), {} }; MODULE_DEVICE_TABLE(x86cpu, intel_pstate_cpu_ids); -- cgit v1.2.3 From 95d38d144ab4520aea3f8fcfacc5fd62d3bf2697 Mon Sep 17 00:00:00 2001 From: Rob Clark Date: Mon, 8 Oct 2012 19:50:41 +0000 Subject: drm/nouveau: use drm_send_vblank_event() helper Signed-off-by: Rob Clark Signed-off-by: Dave Airlie --- drivers/gpu/drm/nouveau/nouveau_display.c | 13 ++----------- 1 file changed, 2 insertions(+), 11 deletions(-) diff --git a/drivers/gpu/drm/nouveau/nouveau_display.c b/drivers/gpu/drm/nouveau/nouveau_display.c index 7bf22d4a3d96..f17dc2ab03ec 100644 --- a/drivers/gpu/drm/nouveau/nouveau_display.c +++ b/drivers/gpu/drm/nouveau/nouveau_display.c @@ -638,17 +638,8 @@ nouveau_finish_page_flip(struct nouveau_channel *chan, } s = list_first_entry(&fctx->flip, struct nouveau_page_flip_state, head); - if (s->event) { - struct drm_pending_vblank_event *e = s->event; - struct timeval now; - - do_gettimeofday(&now); - e->event.sequence = 0; - e->event.tv_sec = now.tv_sec; - e->event.tv_usec = now.tv_usec; - list_add_tail(&e->base.link, &e->base.file_priv->event_list); - wake_up_interruptible(&e->base.file_priv->event_wait); - } + if (s->event) + drm_send_vblank_event(dev, -1, s->event); list_del(&s->head); if (ps) -- cgit v1.2.3 From 26ae466732c181b7376610fd9241787698179b01 Mon Sep 17 00:00:00 2001 From: Rob Clark Date: Mon, 8 Oct 2012 19:50:42 +0000 Subject: drm/radeon: use drm_send_vblank_event() helper Signed-off-by: Rob Clark Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_display.c | 13 +++---------- 1 file changed, 3 insertions(+), 10 deletions(-) diff --git a/drivers/gpu/drm/radeon/radeon_display.c b/drivers/gpu/drm/radeon/radeon_display.c index e38fd559f1ab..eb18bb7af1cc 100644 --- a/drivers/gpu/drm/radeon/radeon_display.c +++ b/drivers/gpu/drm/radeon/radeon_display.c @@ -271,8 +271,6 @@ void radeon_crtc_handle_flip(struct radeon_device *rdev, int crtc_id) { struct radeon_crtc *radeon_crtc = rdev->mode_info.crtcs[crtc_id]; struct radeon_unpin_work *work; - struct drm_pending_vblank_event *e; - struct timeval now; unsigned long flags; u32 update_pending; int vpos, hpos; @@ -328,14 +326,9 @@ void radeon_crtc_handle_flip(struct radeon_device *rdev, int crtc_id) radeon_crtc->unpin_work = NULL; /* wakeup userspace */ - if (work->event) { - e = work->event; - e->event.sequence = drm_vblank_count_and_time(rdev->ddev, crtc_id, &now); - e->event.tv_sec = now.tv_sec; - e->event.tv_usec = now.tv_usec; - list_add_tail(&e->base.link, &e->base.file_priv->event_list); - wake_up_interruptible(&e->base.file_priv->event_wait); - } + if (work->event) + drm_send_vblank_event(rdev->ddev, crtc_id, work->event); + spin_unlock_irqrestore(&rdev->ddev->event_lock, flags); drm_vblank_put(rdev->ddev, radeon_crtc->crtc_id); -- cgit v1.2.3 From f7e96d7e28817a66db36e89f25b77bda7dba6da0 Mon Sep 17 00:00:00 2001 From: Rob Clark Date: Mon, 8 Oct 2012 19:50:45 +0000 Subject: drm/shmob: use drm_send_vblank_event() helper Signed-off-by: Rob Clark Signed-off-by: Dave Airlie --- drivers/gpu/drm/shmobile/shmob_drm_crtc.c | 19 ++++--------------- 1 file changed, 4 insertions(+), 15 deletions(-) diff --git a/drivers/gpu/drm/shmobile/shmob_drm_crtc.c b/drivers/gpu/drm/shmobile/shmob_drm_crtc.c index 7dff49ed66e7..99e2034e49cc 100644 --- a/drivers/gpu/drm/shmobile/shmob_drm_crtc.c +++ b/drivers/gpu/drm/shmobile/shmob_drm_crtc.c @@ -451,27 +451,16 @@ void shmob_drm_crtc_finish_page_flip(struct shmob_drm_crtc *scrtc) { struct drm_pending_vblank_event *event; struct drm_device *dev = scrtc->crtc.dev; - struct timeval vblanktime; unsigned long flags; spin_lock_irqsave(&dev->event_lock, flags); event = scrtc->event; scrtc->event = NULL; + if (event) { + drm_send_vblank_event(dev, 0, event); + drm_vblank_put(dev, 0); + } spin_unlock_irqrestore(&dev->event_lock, flags); - - if (event == NULL) - return; - - event->event.sequence = drm_vblank_count_and_time(dev, 0, &vblanktime); - event->event.tv_sec = vblanktime.tv_sec; - event->event.tv_usec = vblanktime.tv_usec; - - spin_lock_irqsave(&dev->event_lock, flags); - list_add_tail(&event->base.link, &event->base.file_priv->event_list); - wake_up_interruptible(&event->base.file_priv->event_wait); - spin_unlock_irqrestore(&dev->event_lock, flags); - - drm_vblank_put(dev, 0); } static int shmob_drm_crtc_page_flip(struct drm_crtc *crtc, -- cgit v1.2.3 From 0eca56f9467038ee0b798637f03581aaa1186fac Mon Sep 17 00:00:00 2001 From: Rob Clark Date: Mon, 8 Oct 2012 19:50:46 +0000 Subject: drm/imx: use drm_send_vblank_event() helper Also, slightly changes the behavior to always put the vblank irq, even if userspace did not request a vblank event. As far as I can tell, the previous code would leak a vblank irq refcnt if userspace requested a pageflip without event. Signed-off-by: Rob Clark Signed-off-by: Dave Airlie --- drivers/staging/imx-drm/ipuv3-crtc.c | 21 ++------------------- 1 file changed, 2 insertions(+), 19 deletions(-) diff --git a/drivers/staging/imx-drm/ipuv3-crtc.c b/drivers/staging/imx-drm/ipuv3-crtc.c index b028b0d1317b..1cd74f5e4c76 100644 --- a/drivers/staging/imx-drm/ipuv3-crtc.c +++ b/drivers/staging/imx-drm/ipuv3-crtc.c @@ -311,31 +311,14 @@ static int ipu_crtc_mode_set(struct drm_crtc *crtc, static void ipu_crtc_handle_pageflip(struct ipu_crtc *ipu_crtc) { - struct drm_pending_vblank_event *e; - struct timeval now; unsigned long flags; struct drm_device *drm = ipu_crtc->base.dev; spin_lock_irqsave(&drm->event_lock, flags); - - e = ipu_crtc->page_flip_event; - if (!e) { - spin_unlock_irqrestore(&drm->event_lock, flags); - return; - } - - do_gettimeofday(&now); - e->event.sequence = 0; - e->event.tv_sec = now.tv_sec; - e->event.tv_usec = now.tv_usec; + if (ipu_crtc->page_flip_event) + drm_send_vblank_event(drm, -1, ipu_crtc->page_flip_event); ipu_crtc->page_flip_event = NULL; - imx_drm_crtc_vblank_put(ipu_crtc->imx_crtc); - - list_add_tail(&e->base.link, &e->base.file_priv->event_list); - - wake_up_interruptible(&e->base.file_priv->event_wait); - spin_unlock_irqrestore(&drm->event_lock, flags); } -- cgit v1.2.3 From e771451c0a831d96a7c14b0ca8a8ec671d98567b Mon Sep 17 00:00:00 2001 From: Vincent Pelletier Date: Sat, 18 May 2013 18:44:04 +0200 Subject: libata: make ata_exec_internal_sg honor DMADIR MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit libata honors DMADIR for regular commands, but not for internal commands used (among other) during device initialisation. This makes SATA-host-to-PATA-device bridges based on Silicon Image SiL3611 (such as "Abit Serillel 2") end up disabled when used with an ATAPI device after a few tries. Log output of the bridge being hot-plugged with an ATAPI drive: [ 9631.212901] ata1: exception Emask 0x10 SAct 0x0 SErr 0x40c0000 action 0xe frozen [ 9631.212913] ata1: irq_stat 0x00000040, connection status changed [ 9631.212923] ata1: SError: { CommWake 10B8B DevExch } [ 9631.212939] ata1: hard resetting link [ 9632.104962] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 9632.106393] ata1.00: ATAPI: PIONEER DVD-RW DVR-115, 1.06, max UDMA/33 [ 9632.106407] ata1.00: applying bridge limits [ 9632.108151] ata1.00: configured for UDMA/33 [ 9637.105303] ata1.00: qc timeout (cmd 0xa0) [ 9637.105324] ata1.00: failed to clear UNIT ATTENTION (err_mask=0x5) [ 9637.105335] ata1: hard resetting link [ 9638.044599] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 9638.047878] ata1.00: configured for UDMA/33 [ 9643.044933] ata1.00: qc timeout (cmd 0xa0) [ 9643.044953] ata1.00: failed to clear UNIT ATTENTION (err_mask=0x5) [ 9643.044963] ata1: limiting SATA link speed to 1.5 Gbps [ 9643.044971] ata1.00: limiting speed to UDMA/33:PIO3 [ 9643.044979] ata1: hard resetting link [ 9643.984225] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 9643.987471] ata1.00: configured for UDMA/33 [ 9648.984591] ata1.00: qc timeout (cmd 0xa0) [ 9648.984612] ata1.00: failed to clear UNIT ATTENTION (err_mask=0x5) [ 9648.984619] ata1.00: disabled [ 9649.000593] ata1: hard resetting link [ 9649.939902] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 9649.955864] ata1: EH complete With this patch, the drive enumerates correctly when libata is loaded with atapi_dmadir=1: [ 9891.810863] ata1: exception Emask 0x10 SAct 0x0 SErr 0x40c0000 action 0xe frozen [ 9891.810874] ata1: irq_stat 0x00000040, connection status changed [ 9891.810884] ata1: SError: { CommWake 10B8B DevExch } [ 9891.810900] ata1: hard resetting link [ 9892.762105] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 9892.763544] ata1.00: ATAPI: PIONEER DVD-RW DVR-115, 1.06, max UDMA/33, DMADIR [ 9892.763558] ata1.00: applying bridge limits [ 9892.765393] ata1.00: configured for UDMA/33 [ 9892.786063] ata1: EH complete [ 9892.792062] scsi 0:0:0:0: CD-ROM PIONEER DVD-RW DVR-115 1.06 PQ: 0 ANSI: 5 [ 9892.798455] sr2: scsi3-mmc drive: 12x/12x writer dvd-ram cd/rw xa/form2 cdda tray [ 9892.798837] sr 0:0:0:0: Attached scsi CD-ROM sr2 [ 9892.799109] sr 0:0:0:0: Attached scsi generic sg6 type 5 Based on a patch by Csaba Halász on linux-ide: http://marc.info/?l=linux-ide&m=136121147832295&w=2 tj: minor formatting changes. Signed-off-by: Vincent Pelletier Signed-off-by: Tejun Heo Cc: stable@vger.kernel.org --- drivers/ata/libata-core.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index d35524c33905..f2184276539d 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -1602,6 +1602,12 @@ unsigned ata_exec_internal_sg(struct ata_device *dev, qc->tf = *tf; if (cdb) memcpy(qc->cdb, cdb, ATAPI_CDB_LEN); + + /* some SATA bridges need us to indicate data xfer direction */ + if (tf->protocol == ATAPI_PROT_DMA && (dev->flags & ATA_DFLAG_DMADIR) && + dma_dir == DMA_FROM_DEVICE) + qc->tf.feature |= ATAPI_DMADIR; + qc->flags |= ATA_QCFLAG_RESULT_TF; qc->dma_dir = dma_dir; if (dma_dir != DMA_NONE) { -- cgit v1.2.3 From df7e131f6359f20ed8f0a37db039c4f6420a18c2 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Tue, 21 May 2013 23:07:54 +0400 Subject: sata_rcar: clear STOP bit in bmdma_start() method Iff bmdma_setup() has to stop a DMA transfer before starting a new one, then the STOP bit in the ATAPI_CONTROL1 register will remain set (it's only cleared when setting the START bit to 1) and then bmdma_start() method will set both START and STOP bits simultaneously which should abort the transfer being just started. Avoid that by explicitly clearing the STOP bit in bmdma_start() method (in this case it will be ignored on write). Signed-off-by: Sergei Shtylyov Signed-off-by: Tejun Heo Cc: stable@vger.kernel.org --- drivers/ata/sata_rcar.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/ata/sata_rcar.c b/drivers/ata/sata_rcar.c index 4799868bd733..a8e091aafdde 100644 --- a/drivers/ata/sata_rcar.c +++ b/drivers/ata/sata_rcar.c @@ -549,6 +549,7 @@ static void sata_rcar_bmdma_start(struct ata_queued_cmd *qc) /* start host DMA transaction */ dmactl = ioread32(priv->base + ATAPI_CONTROL1_REG); + dmactl &= ~ATAPI_CONTROL1_STOP; dmactl |= ATAPI_CONTROL1_START; iowrite32(dmactl, priv->base + ATAPI_CONTROL1_REG); } -- cgit v1.2.3 From 41eab402b43f1ca3e1279595bc138f5ac2a914f7 Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Mon, 29 Apr 2013 12:27:05 +0530 Subject: drm/exynos: exynos_drm_fbdev: Fix incorrect usage of IS_ERR_OR_NULL exynos_drm_framebuffer_init() does not return NULL. Use IS_ERR instead. Signed-off-by: Sachin Kamat Signed-off-by: Inki Dae --- drivers/gpu/drm/exynos/exynos_drm_fbdev.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/exynos/exynos_drm_fbdev.c b/drivers/gpu/drm/exynos/exynos_drm_fbdev.c index 68f0045f86b8..8f007aaeffc3 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_fbdev.c +++ b/drivers/gpu/drm/exynos/exynos_drm_fbdev.c @@ -182,7 +182,7 @@ static int exynos_drm_fbdev_create(struct drm_fb_helper *helper, helper->fb = exynos_drm_framebuffer_init(dev, &mode_cmd, &exynos_gem_obj->base); - if (IS_ERR_OR_NULL(helper->fb)) { + if (IS_ERR(helper->fb)) { DRM_ERROR("failed to create drm framebuffer.\n"); ret = PTR_ERR(helper->fb); goto err_destroy_gem; -- cgit v1.2.3 From f02504587ed5669cc721a1f2351322e6badfe67f Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Mon, 29 Apr 2013 12:27:06 +0530 Subject: drm/exynos: exynos_drm_ipp: Fix incorrect usage of IS_ERR_OR_NULL None of these functions actually return a NULL pointer. Hence use IS_ERR() instead. Signed-off-by: Sachin Kamat Signed-off-by: Inki Dae --- drivers/gpu/drm/exynos/exynos_drm_ipp.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/drivers/gpu/drm/exynos/exynos_drm_ipp.c b/drivers/gpu/drm/exynos/exynos_drm_ipp.c index 29d2ad314490..5c4764af7cb9 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_ipp.c +++ b/drivers/gpu/drm/exynos/exynos_drm_ipp.c @@ -222,7 +222,7 @@ static struct exynos_drm_ippdrv *ipp_find_driver(struct ipp_context *ctx, /* find ipp driver using idr */ ippdrv = ipp_find_obj(&ctx->ipp_idr, &ctx->ipp_lock, ipp_id); - if (IS_ERR_OR_NULL(ippdrv)) { + if (IS_ERR(ippdrv)) { DRM_ERROR("not found ipp%d driver.\n", ipp_id); return ippdrv; } @@ -388,7 +388,7 @@ static int ipp_find_and_set_property(struct drm_exynos_ipp_property *property) DRM_DEBUG_KMS("%s:prop_id[%d]\n", __func__, prop_id); ippdrv = ipp_find_drv_by_handle(prop_id); - if (IS_ERR_OR_NULL(ippdrv)) { + if (IS_ERR(ippdrv)) { DRM_ERROR("failed to get ipp driver.\n"); return -EINVAL; } @@ -492,7 +492,7 @@ int exynos_drm_ipp_set_property(struct drm_device *drm_dev, void *data, /* find ipp driver using ipp id */ ippdrv = ipp_find_driver(ctx, property); - if (IS_ERR_OR_NULL(ippdrv)) { + if (IS_ERR(ippdrv)) { DRM_ERROR("failed to get ipp driver.\n"); return -EINVAL; } @@ -521,19 +521,19 @@ int exynos_drm_ipp_set_property(struct drm_device *drm_dev, void *data, c_node->state = IPP_STATE_IDLE; c_node->start_work = ipp_create_cmd_work(); - if (IS_ERR_OR_NULL(c_node->start_work)) { + if (IS_ERR(c_node->start_work)) { DRM_ERROR("failed to create start work.\n"); goto err_clear; } c_node->stop_work = ipp_create_cmd_work(); - if (IS_ERR_OR_NULL(c_node->stop_work)) { + if (IS_ERR(c_node->stop_work)) { DRM_ERROR("failed to create stop work.\n"); goto err_free_start; } c_node->event_work = ipp_create_event_work(); - if (IS_ERR_OR_NULL(c_node->event_work)) { + if (IS_ERR(c_node->event_work)) { DRM_ERROR("failed to create event work.\n"); goto err_free_stop; } @@ -915,7 +915,7 @@ static int ipp_queue_buf_with_run(struct device *dev, DRM_DEBUG_KMS("%s\n", __func__); ippdrv = ipp_find_drv_by_handle(qbuf->prop_id); - if (IS_ERR_OR_NULL(ippdrv)) { + if (IS_ERR(ippdrv)) { DRM_ERROR("failed to get ipp driver.\n"); return -EFAULT; } -- cgit v1.2.3 From 4c1d8def9d5bbd642782893ccd849963f1811ae6 Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Mon, 20 May 2013 19:32:06 +0200 Subject: drm/exynos: exynos_hdmi: Pass correct pointer to free_irq() free_irq() expects the same pointer that was passed to request_threaded_irq(), otherwise the IRQ is not freed. The issue was found using the following coccinelle script: @r1@ type T; T devid; @@ request_threaded_irq(..., devid) @r2@ type r1.T; T devid; position p; @@ free_irq@p(..., devid) @@ position p != r2.p; @@ *free_irq@p(...) Signed-off-by: Lars-Peter Clausen Acked-by: Seung-Woo Kim Signed-off-by: Inki Dae --- drivers/gpu/drm/exynos/exynos_hdmi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/exynos/exynos_hdmi.c b/drivers/gpu/drm/exynos/exynos_hdmi.c index bbfc3840080c..7e99853f1e18 100644 --- a/drivers/gpu/drm/exynos/exynos_hdmi.c +++ b/drivers/gpu/drm/exynos/exynos_hdmi.c @@ -2082,7 +2082,7 @@ static int hdmi_remove(struct platform_device *pdev) pm_runtime_disable(dev); - free_irq(hdata->irq, hdata); + free_irq(hdata->irq, ctx); /* hdmiphy i2c driver */ -- cgit v1.2.3 From 94d019b87859bb984bd6c15db330d404eab3acaa Mon Sep 17 00:00:00 2001 From: Rob Clark Date: Mon, 8 Oct 2012 14:50:44 -0500 Subject: drm/exynos: page flip fixes The event wouldn't be on any list at this point, so nothing to delete it from. Signed-off-by: Rob Clark Signed-off-by: Inki Dae --- drivers/gpu/drm/exynos/exynos_drm_crtc.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/gpu/drm/exynos/exynos_drm_crtc.c b/drivers/gpu/drm/exynos/exynos_drm_crtc.c index e8894bc9e6d5..02b36080d00b 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_crtc.c +++ b/drivers/gpu/drm/exynos/exynos_drm_crtc.c @@ -217,7 +217,6 @@ static int exynos_drm_crtc_page_flip(struct drm_crtc *crtc, ret = drm_vblank_get(dev, exynos_crtc->pipe); if (ret) { DRM_DEBUG("failed to acquire vblank counter\n"); - list_del(&event->base.link); goto out; } -- cgit v1.2.3 From 5f10428e4a6d99cc019270c51ad5a33fb38addeb Mon Sep 17 00:00:00 2001 From: Simon Horman Date: Thu, 16 May 2013 12:14:59 +0900 Subject: ARM: shmobile: marzen: Use error values in usb_power_* This patch updates the marzen board code as if USB PHY isn't enabled they phy will have a value set by ERR_PTR() rather than be NULL. Without this patch a NULL pointer dereference and kernel panic occurs on initialisation of USB on marzen. This resolves a regression introduced in 3.10-rc1 by b7fa5c2aec5be083eb2719b405089703608e9bc6 ("usb: phy: return -ENXIO when PHY layer isn't enabled"). Tested-by: Nguyen Hong Ky Signed-off-by: Simon Horman --- arch/arm/mach-shmobile/board-marzen.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/arm/mach-shmobile/board-marzen.c b/arch/arm/mach-shmobile/board-marzen.c index 91052855cc12..b9594e911ce7 100644 --- a/arch/arm/mach-shmobile/board-marzen.c +++ b/arch/arm/mach-shmobile/board-marzen.c @@ -212,8 +212,8 @@ static struct platform_device *marzen_devices[] __initdata = { static struct usb_phy *phy; static int usb_power_on(struct platform_device *pdev) { - if (!phy) - return -EIO; + if (IS_ERR(phy)) + return PTR_ERR(phy); pm_runtime_enable(&pdev->dev); pm_runtime_get_sync(&pdev->dev); @@ -225,7 +225,7 @@ static int usb_power_on(struct platform_device *pdev) static void usb_power_off(struct platform_device *pdev) { - if (!phy) + if (IS_ERR(phy)) return; usb_phy_shutdown(phy); -- cgit v1.2.3 From e3de42b68478a8c95dd27520e9adead2af9477a5 Mon Sep 17 00:00:00 2001 From: Imre Deak Date: Fri, 3 May 2013 19:44:07 +0200 Subject: drm/i915: force full modeset if the connector is in DPMS OFF mode Currently the driver's assumed behavior for a modeset with an attached FB is that the corresponding connector will be switched to DPMS ON mode if it happened to be in DPMS OFF (or another power save mode). This wasn't enforced though if only the FB changed, everything else (format, connector etc.) remaining the same. In this case we only set the new FB base and left the connector in the old power save mode. Fix this by forcing a full modeset whenever there is an attached FB and any affected connector is in a power save mode. V_2: Run the test for encoders in power save mode outside the the test for fb change: user space may have just disabled the encoders but left everything else in place. Make sure the connector list is not empty before running this test. Signed-off-by: Imre Deak Signed-off-by: Egbert Eich Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=61642 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=59834 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=59339 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=64178 Acked-by: Jesse Barnes [danvet: Apply Jani's s/connector_off/is_crtc_connector_off bikeshed.] Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_display.c | 24 ++++++++++++++++++++++-- 1 file changed, 22 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 300942a7d144..ad1117bebd7e 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -8140,6 +8140,21 @@ static void intel_set_config_restore_state(struct drm_device *dev, } } +static bool +is_crtc_connector_off(struct drm_crtc *crtc, struct drm_connector *connectors, + int num_connectors) +{ + int i; + + for (i = 0; i < num_connectors; i++) + if (connectors[i].encoder && + connectors[i].encoder->crtc == crtc && + connectors[i].dpms != DRM_MODE_DPMS_ON) + return true; + + return false; +} + static void intel_set_config_compute_mode_changes(struct drm_mode_set *set, struct intel_set_config *config) @@ -8147,7 +8162,11 @@ intel_set_config_compute_mode_changes(struct drm_mode_set *set, /* We should be able to check here if the fb has the same properties * and then just flip_or_move it */ - if (set->crtc->fb != set->fb) { + if (set->connectors != NULL && + is_crtc_connector_off(set->crtc, *set->connectors, + set->num_connectors)) { + config->mode_changed = true; + } else if (set->crtc->fb != set->fb) { /* If we have no fb then treat it as a full mode set */ if (set->crtc->fb == NULL) { DRM_DEBUG_KMS("crtc has no fb, full mode set\n"); @@ -8157,8 +8176,9 @@ intel_set_config_compute_mode_changes(struct drm_mode_set *set, } else if (set->fb->pixel_format != set->crtc->fb->pixel_format) { config->mode_changed = true; - } else + } else { config->fb_changed = true; + } } if (set->fb && (set->x != set->crtc->x || set->y != set->crtc->y)) -- cgit v1.2.3 From abd9a0c36028771a8f397f38bf79bfcf404f957f Mon Sep 17 00:00:00 2001 From: Sebastian Ott Date: Fri, 17 May 2013 16:37:59 +0200 Subject: s390/dma: do not call debug_dma after free In dma_free_coherent call debug_dma_free_coherent before deallocating the memory to avoid a possible use after free. Reviewed-by: Gerald Schaefer Signed-off-by: Sebastian Ott Signed-off-by: Martin Schwidefsky --- arch/s390/include/asm/dma-mapping.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/s390/include/asm/dma-mapping.h b/arch/s390/include/asm/dma-mapping.h index 9411db653bac..886ac7d4937a 100644 --- a/arch/s390/include/asm/dma-mapping.h +++ b/arch/s390/include/asm/dma-mapping.h @@ -71,8 +71,8 @@ static inline void dma_free_coherent(struct device *dev, size_t size, { struct dma_map_ops *dma_ops = get_dma_ops(dev); - dma_ops->free(dev, size, cpu_addr, dma_handle, NULL); debug_dma_free_coherent(dev, size, cpu_addr, dma_handle); + dma_ops->free(dev, size, cpu_addr, dma_handle, NULL); } #endif /* _ASM_S390_DMA_MAPPING_H */ -- cgit v1.2.3 From 576ebd74928fd60ae112b33c42b89602015fadbd Mon Sep 17 00:00:00 2001 From: Michael Holzheu Date: Tue, 21 May 2013 16:08:22 +0200 Subject: kernel: Fix s390 absolute memory access for /dev/mem On s390 the prefix page and absolute zero pages are not correctly returned when reading /dev/mem. The reason is that the s390 asm/io.h file includes the asm-generic/io.h file which then defines xlate_dev_mem_ptr() and therefore overwrites the s390 specific version that does the correct swap operation for prefix and absolute zero pages. The problem is a regression that was introduced with git commit cd248341 (s390/pci: base support). To fix the problem add "#ifndef xlate_dev_mem_ptr" in asm-generic/io.h and "#define xlate_dev_mem_ptr" in asm/io.h. This ensures that the s390 version is used. For completeness also add the "#ifndef" construct for xlate_dev_kmem_ptr(). Signed-off-by: Michael Holzheu Signed-off-by: Martin Schwidefsky --- arch/s390/include/asm/io.h | 1 + include/asm-generic/io.h | 4 ++++ 2 files changed, 5 insertions(+) diff --git a/arch/s390/include/asm/io.h b/arch/s390/include/asm/io.h index 379d96e2105e..fd9be010f9b2 100644 --- a/arch/s390/include/asm/io.h +++ b/arch/s390/include/asm/io.h @@ -36,6 +36,7 @@ static inline void * phys_to_virt(unsigned long address) } void *xlate_dev_mem_ptr(unsigned long phys); +#define xlate_dev_mem_ptr xlate_dev_mem_ptr void unxlate_dev_mem_ptr(unsigned long phys, void *addr); /* diff --git a/include/asm-generic/io.h b/include/asm-generic/io.h index ac9da00e9f2c..d5afe96adba6 100644 --- a/include/asm-generic/io.h +++ b/include/asm-generic/io.h @@ -343,8 +343,12 @@ extern void ioport_unmap(void __iomem *p); #endif /* CONFIG_GENERIC_IOMAP */ #endif /* CONFIG_HAS_IOPORT */ +#ifndef xlate_dev_kmem_ptr #define xlate_dev_kmem_ptr(p) p +#endif +#ifndef xlate_dev_mem_ptr #define xlate_dev_mem_ptr(p) __va(p) +#endif #ifdef CONFIG_VIRT_TO_BUS #ifndef virt_to_bus -- cgit v1.2.3 From b5f14720a6421aab841d9f03f0129cfbe7db5133 Mon Sep 17 00:00:00 2001 From: Rafał Bilski Date: Sun, 19 May 2013 19:27:55 +0000 Subject: cpufreq / e_powersaver: Fix linker error when ACPI processor is a module on i386: CONFIG_ACPI_PROCESSOR=m CONFIG_X86_E_POWERSAVER=y drivers/built-in.o: In function `eps_cpu_init.part.8': e_powersaver.c:(.text.unlikely+0x2243): undefined reference to `acpi_processor_register_performance' e_powersaver.c:(.text.unlikely+0x22a2): undefined reference to `acpi_processor_unregister_performance' e_powersaver.c:(.text.unlikely+0x246b): undefined reference to `acpi_processor_get_bios_limit' X86_E_POWERSAVER should also depend on ACPI_PROCESSOR. Signed-off-by: Rafal Bilski Acked-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki --- drivers/cpufreq/Kconfig.x86 | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/cpufreq/Kconfig.x86 b/drivers/cpufreq/Kconfig.x86 index 2b8a8c374548..6bd63d63d356 100644 --- a/drivers/cpufreq/Kconfig.x86 +++ b/drivers/cpufreq/Kconfig.x86 @@ -272,7 +272,7 @@ config X86_LONGHAUL config X86_E_POWERSAVER tristate "VIA C7 Enhanced PowerSaver (DANGEROUS)" select CPU_FREQ_TABLE - depends on X86_32 + depends on X86_32 && ACPI_PROCESSOR help This adds the CPUFreq driver for VIA C7 processors. However, this driver does not have any safeguards to prevent operating the CPU out of spec -- cgit v1.2.3 From 92a9b5c291c72aa9899021699458f0b6e328b940 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Fri, 17 May 2013 11:25:11 +0000 Subject: cpufreq: arm_big_little_dt: Register driver only if DT has valid data If arm_big_little_dt driver is enabled, then it will always try to register with big LITTLE cpufreq core driver. In case DT doesn't have relevant data for cpu nodes, i.e. operating points aren't present, then we should exit early and shouldn't register with big LITTLE cpufreq core driver. Otherwise we will fail continuously from the driver->init() routine. This patch fixes this issue. Reported-and-tested-by: Jon Medhurst Reviewed-by: Jon Medhurst Signed-off-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki --- drivers/cpufreq/arm_big_little_dt.c | 73 +++++++++++++++++++++---------------- 1 file changed, 42 insertions(+), 31 deletions(-) diff --git a/drivers/cpufreq/arm_big_little_dt.c b/drivers/cpufreq/arm_big_little_dt.c index 173ed059d95f..27e2f45ccdd5 100644 --- a/drivers/cpufreq/arm_big_little_dt.c +++ b/drivers/cpufreq/arm_big_little_dt.c @@ -19,6 +19,7 @@ #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt +#include #include #include #include @@ -29,60 +30,63 @@ #include #include "arm_big_little.h" -static int dt_init_opp_table(struct device *cpu_dev) +/* get cpu node with valid operating-points */ +static struct device_node *get_cpu_node_with_valid_op(int cpu) { - struct device_node *np, *parent; - int count = 0, ret; + struct device_node *np = NULL, *parent; + int count = 0; parent = of_find_node_by_path("/cpus"); if (!parent) { pr_err("failed to find OF /cpus\n"); - return -ENOENT; + return NULL; } for_each_child_of_node(parent, np) { - if (count++ != cpu_dev->id) + if (count++ != cpu) continue; if (!of_get_property(np, "operating-points", NULL)) { - ret = -ENODATA; - } else { - cpu_dev->of_node = np; - ret = of_init_opp_table(cpu_dev); + of_node_put(np); + np = NULL; } - of_node_put(np); - of_node_put(parent); - return ret; + break; } - return -ENODEV; + of_node_put(parent); + return np; +} + +static int dt_init_opp_table(struct device *cpu_dev) +{ + struct device_node *np; + int ret; + + np = get_cpu_node_with_valid_op(cpu_dev->id); + if (!np) + return -ENODATA; + + cpu_dev->of_node = np; + ret = of_init_opp_table(cpu_dev); + of_node_put(np); + + return ret; } static int dt_get_transition_latency(struct device *cpu_dev) { - struct device_node *np, *parent; + struct device_node *np; u32 transition_latency = CPUFREQ_ETERNAL; - int count = 0; - parent = of_find_node_by_path("/cpus"); - if (!parent) { - pr_info("Failed to find OF /cpus. Use CPUFREQ_ETERNAL transition latency\n"); + np = get_cpu_node_with_valid_op(cpu_dev->id); + if (!np) return CPUFREQ_ETERNAL; - } - - for_each_child_of_node(parent, np) { - if (count++ != cpu_dev->id) - continue; - - of_property_read_u32(np, "clock-latency", &transition_latency); - of_node_put(np); - of_node_put(parent); - return transition_latency; - } + of_property_read_u32(np, "clock-latency", &transition_latency); + of_node_put(np); - pr_info("clock-latency isn't found, use CPUFREQ_ETERNAL transition latency\n"); - return CPUFREQ_ETERNAL; + pr_debug("%s: clock-latency: %d\n", __func__, transition_latency); + return transition_latency; } static struct cpufreq_arm_bL_ops dt_bL_ops = { @@ -93,6 +97,13 @@ static struct cpufreq_arm_bL_ops dt_bL_ops = { static int generic_bL_init(void) { + struct device_node *np; + + np = get_cpu_node_with_valid_op(0); + if (!np) + return -ENODEV; + + of_node_put(np); return bL_cpufreq_register(&dt_bL_ops); } module_init(generic_bL_init); -- cgit v1.2.3 From 9076eaca60b3796b3b97d1914c4924c4bc39f066 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Mon, 20 May 2013 09:57:17 +0530 Subject: cpufreq: arm_big_little_dt: Instantiate as platform_driver As multiplatform build is being adopted by more and more ARM platforms, initcall function should be used very carefully. For example, when both arm_big_little_dt and cpufreq-cpu0 drivers are compiled in, arm_big_little_dt driver may try to register even if we had platform device for cpufreq-cpu0 registered. To eliminate this undesired the effect, the patch changes arm_big_little_dt driver to have it instantiated as a platform_driver. Then it will only run on platforms that create the platform_device "arm-bL-cpufreq-dt". Reported-and-tested-by: Rob Herring Signed-off-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki --- drivers/cpufreq/arm_big_little_dt.c | 20 +++++++++++++++----- 1 file changed, 15 insertions(+), 5 deletions(-) diff --git a/drivers/cpufreq/arm_big_little_dt.c b/drivers/cpufreq/arm_big_little_dt.c index 27e2f45ccdd5..fd9e3ea6a480 100644 --- a/drivers/cpufreq/arm_big_little_dt.c +++ b/drivers/cpufreq/arm_big_little_dt.c @@ -26,6 +26,7 @@ #include #include #include +#include #include #include #include "arm_big_little.h" @@ -95,7 +96,7 @@ static struct cpufreq_arm_bL_ops dt_bL_ops = { .init_opp_table = dt_init_opp_table, }; -static int generic_bL_init(void) +static int generic_bL_probe(struct platform_device *pdev) { struct device_node *np; @@ -106,13 +107,22 @@ static int generic_bL_init(void) of_node_put(np); return bL_cpufreq_register(&dt_bL_ops); } -module_init(generic_bL_init); -static void generic_bL_exit(void) +static int generic_bL_remove(struct platform_device *pdev) { - return bL_cpufreq_unregister(&dt_bL_ops); + bL_cpufreq_unregister(&dt_bL_ops); + return 0; } -module_exit(generic_bL_exit); + +static struct platform_driver generic_bL_platdrv = { + .driver = { + .name = "arm-bL-cpufreq-dt", + .owner = THIS_MODULE, + }, + .probe = generic_bL_probe, + .remove = generic_bL_remove, +}; +module_platform_driver(generic_bL_platdrv); MODULE_AUTHOR("Viresh Kumar "); MODULE_DESCRIPTION("Generic ARM big LITTLE cpufreq driver via DT"); -- cgit v1.2.3 From df97729f1bcb5055ba414f08b48364d46c6baef0 Mon Sep 17 00:00:00 2001 From: Imre Deak Date: Tue, 21 May 2013 20:03:17 +0300 Subject: drm/i915: add msecs_to_jiffies_timeout to guarantee minimum duration We need this to avoid premature timeouts whenever scheduling a timeout based on the current jiffies value. For an explanation see [1]. The following patches will take the helper into use. Once the more generic solution proposed in the thread at [1] is accepted this patch can be reverted while keeping the follow-up patches. [1] http://marc.info/?l=linux-kernel&m=136854294730957&w=2 Signed-off-by: Imre Deak Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/i915_drv.h | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index d5dcf7fe1ee9..b9d00dcf9a2d 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -1943,4 +1943,19 @@ static inline void __user *to_user_ptr(u64 address) return (void __user *)(uintptr_t)address; } +static inline unsigned long msecs_to_jiffies_timeout(const unsigned int m) +{ + unsigned long j = msecs_to_jiffies(m); + + return min_t(unsigned long, MAX_JIFFY_OFFSET, j + 1); +} + +static inline unsigned long +timespec_to_jiffies_timeout(const struct timespec *value) +{ + unsigned long j = timespec_to_jiffies(value); + + return min_t(unsigned long, MAX_JIFFY_OFFSET, j + 1); +} + #endif -- cgit v1.2.3 From 2554fc1fa6dc184ca553f73e3796fa59745efa8a Mon Sep 17 00:00:00 2001 From: Imre Deak Date: Tue, 21 May 2013 20:03:18 +0300 Subject: drm/i915: use msecs_to_jiffies_timeout instead of open coding the same Signed-off-by: Imre Deak Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_i2c.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/intel_i2c.c b/drivers/gpu/drm/i915/intel_i2c.c index 5d245031e391..98cd85352d9a 100644 --- a/drivers/gpu/drm/i915/intel_i2c.c +++ b/drivers/gpu/drm/i915/intel_i2c.c @@ -228,7 +228,7 @@ gmbus_wait_hw_status(struct drm_i915_private *dev_priv, * need to wake up periodically and check that ourselves. */ I915_WRITE(GMBUS4 + reg_offset, gmbus4_irq_en); - for (i = 0; i < msecs_to_jiffies(50) + 1; i++) { + for (i = 0; i < msecs_to_jiffies_timeout(50); i++) { prepare_to_wait(&dev_priv->gmbus_wait_queue, &wait, TASK_UNINTERRUPTIBLE); -- cgit v1.2.3 From e054cc3937a4a58e77870d4c922a7b21824b610a Mon Sep 17 00:00:00 2001 From: Imre Deak Date: Tue, 21 May 2013 20:03:19 +0300 Subject: drm/i915: avoid premature timeouts in __wait_seqno() At the moment wait_event_timeout/wait_event_interruptible_timeout may time out 1 jiffy too early, as the calculated expiry time is 1 less than needed. Besides timing out too early this also means that the calculation of the remaining time will be incorrect and we will pass a non-zero remaining time to user space in case of a time out. This is one reason for the following bugzilla report: Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=64270 Signed-off-by: Imre Deak Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/i915_gem.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index 6165535d15f0..a6cf8e843973 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -1003,7 +1003,7 @@ static int __wait_seqno(struct intel_ring_buffer *ring, u32 seqno, wait_forever = false; } - timeout_jiffies = timespec_to_jiffies(&wait_time); + timeout_jiffies = timespec_to_jiffies_timeout(&wait_time); if (WARN_ON(!ring->irq_get(ring))) return -ENODEV; -- cgit v1.2.3 From 3598706b52cb45ba0a9e8aa99ce5ac59140f2b8b Mon Sep 17 00:00:00 2001 From: Imre Deak Date: Tue, 21 May 2013 20:03:20 +0300 Subject: drm/i915: avoid premature DP AUX timeouts During DP AUX communication we might time out 1 jiffy too early, because the calculated expiry jiffy value is one less than needed. This is only one reason for false DP AUX timeouts. For a complete solution we also need the following fix, which is now queued for mainline: http://marc.info/?l=linux-kernel&m=136748515710837&w=2 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=64133 Signed-off-by: Imre Deak Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_dp.c | 2 +- drivers/gpu/drm/i915/intel_i2c.c | 3 ++- 2 files changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index 3d704b706a8d..70789b1b5642 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -303,7 +303,7 @@ intel_dp_aux_wait_done(struct intel_dp *intel_dp, bool has_aux_irq) #define C (((status = I915_READ_NOTRACE(ch_ctl)) & DP_AUX_CH_CTL_SEND_BUSY) == 0) if (has_aux_irq) done = wait_event_timeout(dev_priv->gmbus_wait_queue, C, - msecs_to_jiffies(10)); + msecs_to_jiffies_timeout(10)); else done = wait_for_atomic(C, 10) == 0; if (!done) diff --git a/drivers/gpu/drm/i915/intel_i2c.c b/drivers/gpu/drm/i915/intel_i2c.c index 98cd85352d9a..639fe192997c 100644 --- a/drivers/gpu/drm/i915/intel_i2c.c +++ b/drivers/gpu/drm/i915/intel_i2c.c @@ -263,7 +263,8 @@ gmbus_wait_idle(struct drm_i915_private *dev_priv) /* Important: The hw handles only the first bit, so set only one! */ I915_WRITE(GMBUS4 + reg_offset, GMBUS_IDLE_EN); - ret = wait_event_timeout(dev_priv->gmbus_wait_queue, C, 10); + ret = wait_event_timeout(dev_priv->gmbus_wait_queue, C, + msecs_to_jiffies_timeout(10)); I915_WRITE(GMBUS4 + reg_offset, 0); -- cgit v1.2.3 From 08c96abd611beadf2af414a306fe0fb02ba706ff Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Sat, 18 May 2013 21:28:15 +0200 Subject: ath9k: prevent aggregation session deadlocks Waiting for all subframes of an existing aggregation session to drain before allowing mac80211 to start a new one is fragile and deadlocks caused by this behavior have been observed. Since mac80211 has proper synchronization for aggregation session start/stop handling, a better approach to session handling is to simply allow mac80211 to start a new session at any time. This requires changing the code to discard any packets outside of the BlockAck window in the A-MPDU software retry code. This patch implements the above and also simplifies the code. Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/ath9k.h | 14 +--- drivers/net/wireless/ath/ath9k/main.c | 3 +- drivers/net/wireless/ath/ath9k/rc.c | 5 +- drivers/net/wireless/ath/ath9k/xmit.c | 138 ++++++++++----------------------- 4 files changed, 46 insertions(+), 114 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h index 366002f266f8..42b03dc39d14 100644 --- a/drivers/net/wireless/ath/ath9k/ath9k.h +++ b/drivers/net/wireless/ath/ath9k/ath9k.h @@ -251,10 +251,9 @@ struct ath_atx_tid { int tidno; int baw_head; /* first un-acked tx buffer */ int baw_tail; /* next unused tx buffer slot */ - int sched; - int paused; - u8 state; - bool stop_cb; + bool sched; + bool paused; + bool active; }; struct ath_node { @@ -275,10 +274,6 @@ struct ath_node { #endif }; -#define AGGR_CLEANUP BIT(1) -#define AGGR_ADDBA_COMPLETE BIT(2) -#define AGGR_ADDBA_PROGRESS BIT(3) - struct ath_tx_control { struct ath_txq *txq; struct ath_node *an; @@ -352,8 +347,7 @@ void ath_tx_tasklet(struct ath_softc *sc); void ath_tx_edma_tasklet(struct ath_softc *sc); int ath_tx_aggr_start(struct ath_softc *sc, struct ieee80211_sta *sta, u16 tid, u16 *ssn); -bool ath_tx_aggr_stop(struct ath_softc *sc, struct ieee80211_sta *sta, u16 tid, - bool flush); +void ath_tx_aggr_stop(struct ath_softc *sc, struct ieee80211_sta *sta, u16 tid); void ath_tx_aggr_resume(struct ath_softc *sc, struct ieee80211_sta *sta, u16 tid); void ath_tx_aggr_wakeup(struct ath_softc *sc, struct ath_node *an); diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c index 2382d1262e7f..5092ecae7706 100644 --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c @@ -1709,7 +1709,8 @@ static int ath9k_ampdu_action(struct ieee80211_hw *hw, flush = true; case IEEE80211_AMPDU_TX_STOP_CONT: ath9k_ps_wakeup(sc); - if (ath_tx_aggr_stop(sc, sta, tid, flush)) + ath_tx_aggr_stop(sc, sta, tid); + if (!flush) ieee80211_stop_tx_ba_cb_irqsafe(vif, sta->addr, tid); ath9k_ps_restore(sc); break; diff --git a/drivers/net/wireless/ath/ath9k/rc.c b/drivers/net/wireless/ath/ath9k/rc.c index aa4d368d8d3d..7eb1f4b458e4 100644 --- a/drivers/net/wireless/ath/ath9k/rc.c +++ b/drivers/net/wireless/ath/ath9k/rc.c @@ -1227,10 +1227,7 @@ static bool ath_tx_aggr_check(struct ath_softc *sc, struct ieee80211_sta *sta, return false; txtid = ATH_AN_2_TID(an, tidno); - - if (!(txtid->state & (AGGR_ADDBA_COMPLETE | AGGR_ADDBA_PROGRESS))) - return true; - return false; + return !txtid->active; } diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c index 14bb3354ea64..1c9b1bac8b0d 100644 --- a/drivers/net/wireless/ath/ath9k/xmit.c +++ b/drivers/net/wireless/ath/ath9k/xmit.c @@ -125,24 +125,6 @@ static void ath_tx_queue_tid(struct ath_txq *txq, struct ath_atx_tid *tid) list_add_tail(&ac->list, &txq->axq_acq); } -static void ath_tx_resume_tid(struct ath_softc *sc, struct ath_atx_tid *tid) -{ - struct ath_txq *txq = tid->ac->txq; - - WARN_ON(!tid->paused); - - ath_txq_lock(sc, txq); - tid->paused = false; - - if (skb_queue_empty(&tid->buf_q)) - goto unlock; - - ath_tx_queue_tid(txq, tid); - ath_txq_schedule(sc, txq); -unlock: - ath_txq_unlock_complete(sc, txq); -} - static struct ath_frame_info *get_frame_info(struct sk_buff *skb) { struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb); @@ -164,20 +146,7 @@ static void ath_set_rates(struct ieee80211_vif *vif, struct ieee80211_sta *sta, ARRAY_SIZE(bf->rates)); } -static void ath_tx_clear_tid(struct ath_softc *sc, struct ath_atx_tid *tid) -{ - tid->state &= ~AGGR_ADDBA_COMPLETE; - tid->state &= ~AGGR_CLEANUP; - if (!tid->stop_cb) - return; - - ieee80211_start_tx_ba_cb_irqsafe(tid->an->vif, tid->an->sta->addr, - tid->tidno); - tid->stop_cb = false; -} - -static void ath_tx_flush_tid(struct ath_softc *sc, struct ath_atx_tid *tid, - bool flush_packets) +static void ath_tx_flush_tid(struct ath_softc *sc, struct ath_atx_tid *tid) { struct ath_txq *txq = tid->ac->txq; struct sk_buff *skb; @@ -194,15 +163,16 @@ static void ath_tx_flush_tid(struct ath_softc *sc, struct ath_atx_tid *tid, while ((skb = __skb_dequeue(&tid->buf_q))) { fi = get_frame_info(skb); bf = fi->bf; - if (!bf && !flush_packets) - bf = ath_tx_setup_buffer(sc, txq, tid, skb); if (!bf) { - ieee80211_free_txskb(sc->hw, skb); - continue; + bf = ath_tx_setup_buffer(sc, txq, tid, skb); + if (!bf) { + ieee80211_free_txskb(sc->hw, skb); + continue; + } } - if (fi->retries || flush_packets) { + if (fi->retries) { list_add_tail(&bf->list, &bf_head); ath_tx_update_baw(sc, tid, bf->bf_state.seqno); ath_tx_complete_buf(sc, bf, txq, &bf_head, &ts, 0); @@ -213,10 +183,7 @@ static void ath_tx_flush_tid(struct ath_softc *sc, struct ath_atx_tid *tid, } } - if (tid->baw_head == tid->baw_tail) - ath_tx_clear_tid(sc, tid); - - if (sendbar && !flush_packets) { + if (sendbar) { ath_txq_unlock(sc, txq); ath_send_bar(tid, tid->seq_start); ath_txq_lock(sc, txq); @@ -499,19 +466,19 @@ static void ath_tx_complete_aggr(struct ath_softc *sc, struct ath_txq *txq, tx_info = IEEE80211_SKB_CB(skb); fi = get_frame_info(skb); - if (ATH_BA_ISSET(ba, ATH_BA_INDEX(seq_st, seqno))) { + if (!BAW_WITHIN(tid->seq_start, tid->baw_size, seqno)) { + /* + * Outside of the current BlockAck window, + * maybe part of a previous session + */ + txfail = 1; + } else if (ATH_BA_ISSET(ba, ATH_BA_INDEX(seq_st, seqno))) { /* transmit completion, subframe is * acked by block ack */ acked_cnt++; } else if (!isaggr && txok) { /* transmit completion */ acked_cnt++; - } else if (tid->state & AGGR_CLEANUP) { - /* - * cleanup in progress, just fail - * the un-acked sub-frames - */ - txfail = 1; } else if (flush) { txpending = 1; } else if (fi->retries < ATH_MAX_SW_RETRIES) { @@ -535,7 +502,7 @@ static void ath_tx_complete_aggr(struct ath_softc *sc, struct ath_txq *txq, if (bf_next != NULL || !bf_last->bf_stale) list_move_tail(&bf->list, &bf_head); - if (!txpending || (tid->state & AGGR_CLEANUP)) { + if (!txpending) { /* * complete the acked-ones/xretried ones; update * block-ack window @@ -609,9 +576,6 @@ static void ath_tx_complete_aggr(struct ath_softc *sc, struct ath_txq *txq, ath_txq_lock(sc, txq); } - if (tid->state & AGGR_CLEANUP) - ath_tx_flush_tid(sc, tid, false); - rcu_read_unlock(); if (needreset) @@ -1244,9 +1208,6 @@ int ath_tx_aggr_start(struct ath_softc *sc, struct ieee80211_sta *sta, an = (struct ath_node *)sta->drv_priv; txtid = ATH_AN_2_TID(an, tid); - if (txtid->state & (AGGR_CLEANUP | AGGR_ADDBA_COMPLETE)) - return -EAGAIN; - /* update ampdu factor/density, they may have changed. This may happen * in HT IBSS when a beacon with HT-info is received after the station * has already been added. @@ -1258,7 +1219,7 @@ int ath_tx_aggr_start(struct ath_softc *sc, struct ieee80211_sta *sta, an->mpdudensity = density; } - txtid->state |= AGGR_ADDBA_PROGRESS; + txtid->active = true; txtid->paused = true; *ssn = txtid->seq_start = txtid->seq_next; txtid->bar_index = -1; @@ -1269,45 +1230,17 @@ int ath_tx_aggr_start(struct ath_softc *sc, struct ieee80211_sta *sta, return 0; } -bool ath_tx_aggr_stop(struct ath_softc *sc, struct ieee80211_sta *sta, u16 tid, - bool flush) +void ath_tx_aggr_stop(struct ath_softc *sc, struct ieee80211_sta *sta, u16 tid) { struct ath_node *an = (struct ath_node *)sta->drv_priv; struct ath_atx_tid *txtid = ATH_AN_2_TID(an, tid); struct ath_txq *txq = txtid->ac->txq; - bool ret = !flush; - - if (flush) - txtid->stop_cb = false; - - if (txtid->state & AGGR_CLEANUP) - return false; - - if (!(txtid->state & AGGR_ADDBA_COMPLETE)) { - txtid->state &= ~AGGR_ADDBA_PROGRESS; - return ret; - } ath_txq_lock(sc, txq); + txtid->active = false; txtid->paused = true; - - /* - * If frames are still being transmitted for this TID, they will be - * cleaned up during tx completion. To prevent race conditions, this - * TID can only be reused after all in-progress subframes have been - * completed. - */ - if (txtid->baw_head != txtid->baw_tail) { - txtid->state |= AGGR_CLEANUP; - ret = false; - txtid->stop_cb = !flush; - } else { - txtid->state &= ~AGGR_ADDBA_COMPLETE; - } - - ath_tx_flush_tid(sc, txtid, flush); + ath_tx_flush_tid(sc, txtid); ath_txq_unlock_complete(sc, txq); - return ret; } void ath_tx_aggr_sleep(struct ieee80211_sta *sta, struct ath_softc *sc, @@ -1371,18 +1304,28 @@ void ath_tx_aggr_wakeup(struct ath_softc *sc, struct ath_node *an) } } -void ath_tx_aggr_resume(struct ath_softc *sc, struct ieee80211_sta *sta, u16 tid) +void ath_tx_aggr_resume(struct ath_softc *sc, struct ieee80211_sta *sta, + u16 tidno) { - struct ath_atx_tid *txtid; + struct ath_atx_tid *tid; struct ath_node *an; + struct ath_txq *txq; an = (struct ath_node *)sta->drv_priv; + tid = ATH_AN_2_TID(an, tidno); + txq = tid->ac->txq; - txtid = ATH_AN_2_TID(an, tid); - txtid->baw_size = IEEE80211_MIN_AMPDU_BUF << sta->ht_cap.ampdu_factor; - txtid->state |= AGGR_ADDBA_COMPLETE; - txtid->state &= ~AGGR_ADDBA_PROGRESS; - ath_tx_resume_tid(sc, txtid); + ath_txq_lock(sc, txq); + + tid->baw_size = IEEE80211_MIN_AMPDU_BUF << sta->ht_cap.ampdu_factor; + tid->paused = false; + + if (!skb_queue_empty(&tid->buf_q)) { + ath_tx_queue_tid(txq, tid); + ath_txq_schedule(sc, txq); + } + + ath_txq_unlock_complete(sc, txq); } /********************/ @@ -2431,13 +2374,10 @@ void ath_tx_node_init(struct ath_softc *sc, struct ath_node *an) tid->baw_head = tid->baw_tail = 0; tid->sched = false; tid->paused = false; - tid->state &= ~AGGR_CLEANUP; + tid->active = false; __skb_queue_head_init(&tid->buf_q); acno = TID_TO_WME_AC(tidno); tid->ac = &an->ac[acno]; - tid->state &= ~AGGR_ADDBA_COMPLETE; - tid->state &= ~AGGR_ADDBA_PROGRESS; - tid->stop_cb = false; } for (acno = 0, ac = &an->ac[acno]; @@ -2474,7 +2414,7 @@ void ath_tx_node_cleanup(struct ath_softc *sc, struct ath_node *an) } ath_tid_drain(sc, txq, tid); - ath_tx_clear_tid(sc, tid); + tid->active = false; ath_txq_unlock(sc, txq); } -- cgit v1.2.3 From 0b6e81d1658e2aa6b3acc942088c529fee5aa62e Mon Sep 17 00:00:00 2001 From: Nicolas Schichan Date: Wed, 22 May 2013 19:19:25 +0200 Subject: ASoC: cs42l52: microphone bias is controlled by IFACE_CTL2 register. Signed-off-by: Nicolas Schichan Acked-by: Brian Austin Signed-off-by: Mark Brown --- sound/soc/codecs/cs42l52.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/codecs/cs42l52.c b/sound/soc/codecs/cs42l52.c index 0f6f481cec09..1a17c8575886 100644 --- a/sound/soc/codecs/cs42l52.c +++ b/sound/soc/codecs/cs42l52.c @@ -225,7 +225,7 @@ static const char * const mic_bias_level_text[] = { }; static const struct soc_enum mic_bias_level_enum = - SOC_ENUM_SINGLE(CS42L52_IFACE_CTL1, 0, + SOC_ENUM_SINGLE(CS42L52_IFACE_CTL2, 0, ARRAY_SIZE(mic_bias_level_text), mic_bias_level_text); static const char * const cs42l52_mic_text[] = { "Single", "Differential" }; -- cgit v1.2.3 From 99674c721fd9393030365b66cbbceaa193b0c0fd Mon Sep 17 00:00:00 2001 From: Nicolas Schichan Date: Wed, 22 May 2013 19:19:26 +0200 Subject: ASoC: cs42l52: fix bogus shifts in "Speaker Volume" and "PCM Mixer Volume" controls. Signed-off-by: Nicolas Schichan Acked-by: Brian Austin Signed-off-by: Mark Brown --- sound/soc/codecs/cs42l52.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/soc/codecs/cs42l52.c b/sound/soc/codecs/cs42l52.c index 1a17c8575886..8465c1fa6bf9 100644 --- a/sound/soc/codecs/cs42l52.c +++ b/sound/soc/codecs/cs42l52.c @@ -413,7 +413,7 @@ static const struct snd_kcontrol_new cs42l52_snd_controls[] = { SOC_ENUM("Headphone Analog Gain", hp_gain_enum), SOC_DOUBLE_R_SX_TLV("Speaker Volume", CS42L52_SPKA_VOL, - CS42L52_SPKB_VOL, 7, 0x1, 0xff, hl_tlv), + CS42L52_SPKB_VOL, 0, 0x1, 0xff, hl_tlv), SOC_DOUBLE_R_SX_TLV("Bypass Volume", CS42L52_PASSTHRUA_VOL, CS42L52_PASSTHRUB_VOL, 6, 0x18, 0x90, pga_tlv), @@ -441,7 +441,7 @@ static const struct snd_kcontrol_new cs42l52_snd_controls[] = { SOC_DOUBLE_R_SX_TLV("PCM Mixer Volume", CS42L52_PCMA_MIXER_VOL, CS42L52_PCMB_MIXER_VOL, - 6, 0x7f, 0x19, hl_tlv), + 0, 0x7f, 0x19, hl_tlv), SOC_DOUBLE_R("PCM Mixer Switch", CS42L52_PCMA_MIXER_VOL, CS42L52_PCMB_MIXER_VOL, 7, 1, 1), -- cgit v1.2.3 From 40e2516acb426f349c70e3bada821f3203b69de2 Mon Sep 17 00:00:00 2001 From: Nicolas Schichan Date: Wed, 22 May 2013 19:19:27 +0200 Subject: ASoC: cs42l52: fix master playback mute mask. The mask should define the bits to change in the register, not the bits to preserve. This fixes the inadvertent changes of the "Headphone Analog Gain" value during mute/unmute. Signed-off-by: Nicolas Schichan Acked-by: Brian Austin Signed-off-by: Mark Brown --- sound/soc/codecs/cs42l52.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/codecs/cs42l52.h b/sound/soc/codecs/cs42l52.h index 60985c059071..4277012c4719 100644 --- a/sound/soc/codecs/cs42l52.h +++ b/sound/soc/codecs/cs42l52.h @@ -157,7 +157,7 @@ #define CS42L52_PB_CTL1_INV_PCMA (1 << 2) #define CS42L52_PB_CTL1_MSTB_MUTE (1 << 1) #define CS42L52_PB_CTL1_MSTA_MUTE (1 << 0) -#define CS42L52_PB_CTL1_MUTE_MASK 0xFFFD +#define CS42L52_PB_CTL1_MUTE_MASK 0x03 #define CS42L52_PB_CTL1_MUTE 3 #define CS42L52_PB_CTL1_UNMUTE 0 -- cgit v1.2.3 From beaee9cac180e37bbb30d538bcea0ebbcf4fba0e Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Tue, 30 Apr 2013 10:57:05 +0300 Subject: atmel: printing bogus information There was an extra ';' character added to the end of the if statement which means that it always prints that the /proc entry wasn't created even though it was. Signed-off-by: Dan Carpenter Acked-by: David Howells Signed-off-by: John W. Linville --- drivers/net/wireless/atmel.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/atmel.c b/drivers/net/wireless/atmel.c index 830bb1d1f957..b827d51c30a3 100644 --- a/drivers/net/wireless/atmel.c +++ b/drivers/net/wireless/atmel.c @@ -1624,7 +1624,7 @@ struct net_device *init_atmel_card(unsigned short irq, unsigned long port, netif_carrier_off(dev); - if (!proc_create_data("driver/atmel", 0, NULL, &atmel_proc_fops, priv)); + if (!proc_create_data("driver/atmel", 0, NULL, &atmel_proc_fops, priv)) printk(KERN_WARNING "atmel: unable to create /proc entry.\n"); printk(KERN_INFO "%s: Atmel at76c50x. Version %d.%d. MAC %pM\n", -- cgit v1.2.3 From a3c3cac5d31879cd9ae2de7874dc6544ca704aec Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Wed, 22 May 2013 12:57:24 -0400 Subject: SUNRPC: Prevent an rpc_task wakeup race The lockless RPC_IS_QUEUED() test in __rpc_execute means that we need to be careful about ordering the calls to rpc_test_and_set_running(task) and rpc_clear_queued(task). If we get the order wrong, then we may end up testing the RPC_TASK_RUNNING flag after __rpc_execute() has looped and changed the state of the rpc_task. Signed-off-by: Trond Myklebust Cc: stable@vger.kernel.org --- net/sunrpc/sched.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/net/sunrpc/sched.c b/net/sunrpc/sched.c index f8529fc8e542..5356b120dbf8 100644 --- a/net/sunrpc/sched.c +++ b/net/sunrpc/sched.c @@ -324,11 +324,17 @@ EXPORT_SYMBOL_GPL(__rpc_wait_for_completion_task); * Note: If the task is ASYNC, and is being made runnable after sitting on an * rpc_wait_queue, this must be called with the queue spinlock held to protect * the wait queue operation. + * Note the ordering of rpc_test_and_set_running() and rpc_clear_queued(), + * which is needed to ensure that __rpc_execute() doesn't loop (due to the + * lockless RPC_IS_QUEUED() test) before we've had a chance to test + * the RPC_TASK_RUNNING flag. */ static void rpc_make_runnable(struct rpc_task *task) { + bool need_wakeup = !rpc_test_and_set_running(task); + rpc_clear_queued(task); - if (rpc_test_and_set_running(task)) + if (!need_wakeup) return; if (RPC_IS_ASYNC(task)) { INIT_WORK(&task->u.tk_work, rpc_async_schedule); -- cgit v1.2.3 From 934fc24df10abfd5aff533d0d044a17669d77d79 Mon Sep 17 00:00:00 2001 From: Ard Biesheuvel Date: Wed, 15 May 2013 10:46:30 +0100 Subject: ARM: 7723/1: crypto: sha1-armv4-large.S: fix SP handling Make the SHA1 asm code ABI conformant by making sure all stack accesses occur above the stack pointer. Origin: http://git.openssl.org/gitweb/?p=openssl.git;a=commit;h=1a9d60d2 Signed-off-by: Ard Biesheuvel Acked-by: Nicolas Pitre Cc: stable@vger.kernel.org Signed-off-by: Russell King --- arch/arm/crypto/sha1-armv4-large.S | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/crypto/sha1-armv4-large.S b/arch/arm/crypto/sha1-armv4-large.S index 92c6eed7aac9..99207c45ec10 100644 --- a/arch/arm/crypto/sha1-armv4-large.S +++ b/arch/arm/crypto/sha1-armv4-large.S @@ -195,6 +195,7 @@ ENTRY(sha1_block_data_order) add r3,r3,r10 @ E+=F_00_19(B,C,D) cmp r14,sp bne .L_00_15 @ [((11+4)*5+2)*3] + sub sp,sp,#25*4 #if __ARM_ARCH__<7 ldrb r10,[r1,#2] ldrb r9,[r1,#3] @@ -290,7 +291,6 @@ ENTRY(sha1_block_data_order) add r3,r3,r10 @ E+=F_00_19(B,C,D) ldr r8,.LK_20_39 @ [+15+16*4] - sub sp,sp,#25*4 cmn sp,#0 @ [+3], clear carry to denote 20_39 .L_20_39_or_60_79: ldr r9,[r14,#15*4] -- cgit v1.2.3 From 4ca46c5e1f38e32c90247686e9e17dae213ecbdb Mon Sep 17 00:00:00 2001 From: Steven Capper Date: Thu, 16 May 2013 17:16:11 +0100 Subject: ARM: 7727/1: remove the .vm_mm value from gate_vma If one reads /proc/$PID/smaps, the mmap_sem belonging to the address space of the task being examined is locked for reading. All the pages of the vmas belonging to the task's address space are then walked with this lock held. If a gate_vma is present in the architecture, it too is examined by the fs/proc/task_mmu.c code. As gate_vma doesn't belong to the address space of the task though, its pages are not walked. A recent cleanup (commit f6604efe) of the gate_vma initialisation code set the vm_mm value to &init_mm. Unfortunately a non-NULL vm_mm value in the gate_vma will cause the task_mmu code to attempt to walk the pages of the gate_vma (with no mmap-sem lock held). If one enables Transparent Huge Page support and vm debugging, this will then cause OOPses as pmd_trans_huge_lock is called without mmap_sem being locked. This patch removes the .vm_mm value from gate_vma, restoring the original behaviour of the task_mmu code. Signed-off-by: Steve Capper Signed-off-by: Russell King --- arch/arm/kernel/process.c | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c index f21970316836..282de4826abb 100644 --- a/arch/arm/kernel/process.c +++ b/arch/arm/kernel/process.c @@ -411,7 +411,6 @@ static struct vm_area_struct gate_vma = { .vm_start = 0xffff0000, .vm_end = 0xffff0000 + PAGE_SIZE, .vm_flags = VM_READ | VM_EXEC | VM_MAYREAD | VM_MAYEXEC, - .vm_mm = &init_mm, }; static int __init gate_vma_init(void) -- cgit v1.2.3 From f27d6e172367a424ecf9d373062a820338671277 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Thu, 16 May 2013 19:38:51 +0100 Subject: ARM: 7729/1: vfp: ensure VFP_arch is non-zero when VFP is not supported Commit d3f79584a8b5 ("ARM: cleanup undefined instruction entry code") improved the register scheduling when handling undefined instructions. A side effect of this is that r5 is now used as a temporary, whilst the VFP probing code relies on r5 containing a non-zero value when VFP is not supported. This patch fixes the VFP detection code so that we don't rely on the contents of r5. Without this patch, Linux dies loudly on CPUs without VFP support. Signed-off-by: Will Deacon Signed-off-by: Russell King --- arch/arm/vfp/entry.S | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/vfp/entry.S b/arch/arm/vfp/entry.S index 323ce1a62bbf..46e17492fd1f 100644 --- a/arch/arm/vfp/entry.S +++ b/arch/arm/vfp/entry.S @@ -60,7 +60,7 @@ ENTRY(vfp_testing_entry) str r11, [r10, #TI_PREEMPT] #endif ldr r0, VFP_arch_address - str r5, [r0] @ known non-zero value + str r0, [r0] @ set to non-zero value mov pc, r9 @ we have handled the fault ENDPROC(vfp_testing_entry) -- cgit v1.2.3 From c8f6d8351ba8c89d5cd4c562552ec7ec29274e31 Mon Sep 17 00:00:00 2001 From: Bastian Triller Date: Sun, 19 May 2013 11:52:33 +0000 Subject: ACPI / video: Add "Asus UL30A" to ACPI video detect blacklist Like on UL30VT, the ACPI video driver can't control backlight correctly on Asus UL30A. Vendor driver (asus-laptop) can work. This patch is to add "Asus UL30A" to ACPI video detect blacklist in order to use asus-laptop for video control on the "Asus UL30A" rather than ACPI video driver. Signed-off-by: Bastian Triller Cc: All Signed-off-by: Rafael J. Wysocki --- drivers/acpi/video_detect.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/acpi/video_detect.c b/drivers/acpi/video_detect.c index 66f67626f02e..e6bd910bc6ed 100644 --- a/drivers/acpi/video_detect.c +++ b/drivers/acpi/video_detect.c @@ -161,6 +161,14 @@ static struct dmi_system_id video_detect_dmi_table[] = { DMI_MATCH(DMI_PRODUCT_NAME, "UL30VT"), }, }, + { + .callback = video_detect_force_vendor, + .ident = "Asus UL30A", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK Computer Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "UL30A"), + }, + }, { }, }; -- cgit v1.2.3 From f538881cc672c1b049aa0a34a792d0953fcecba5 Mon Sep 17 00:00:00 2001 From: Vineet Gupta Date: Thu, 16 May 2013 12:19:29 +0530 Subject: ARC: [mm] Prevent stray dcache lines after__sync_icache_dcach() Flush and INVALIDATE the dcache page. This helper is only used for writeback of CODE pages to memory. So there's no value in keeping the dcache lines around. Infact it is risky as a writeback on natural eviction under pressure can cause un-needed writeback with weird issues on aliasing dcache configurations. Signed-off-by: Vineet Gupta --- arch/arc/mm/cache_arc700.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arc/mm/cache_arc700.c b/arch/arc/mm/cache_arc700.c index 2f12bca8aef3..d4b7bb616840 100644 --- a/arch/arc/mm/cache_arc700.c +++ b/arch/arc/mm/cache_arc700.c @@ -610,7 +610,7 @@ void __sync_icache_dcache(unsigned long paddr, unsigned long vaddr, int len) local_irq_save(flags); __ic_line_inv_vaddr(paddr, vaddr, len); - __dc_line_op(paddr, vaddr, len, OP_FLUSH); + __dc_line_op(paddr, vaddr, len, OP_FLUSH_N_INV); local_irq_restore(flags); } -- cgit v1.2.3 From a950549c675f2c8c504469dec7d780da8a6433dc Mon Sep 17 00:00:00 2001 From: Vineet Gupta Date: Tue, 21 May 2013 15:25:11 +0530 Subject: ARC: copy_(to|from)_user() to honor usermode-access permissions This manifested as grep failing psuedo-randomly: -------------->8--------------------- [ARCLinux]$ ip address show lo | grep inet [ARCLinux]$ ip address show lo | grep inet [ARCLinux]$ ip address show lo | grep inet [ARCLinux]$ [ARCLinux]$ ip address show lo | grep inet inet 127.0.0.1/8 scope host lo -------------->8--------------------- ARC700 MMU provides fully orthogonal permission bits per page: Ur, Uw, Ux, Kr, Kw, Kx The user mode page permission templates used to have all Kernel mode access bits enabled. This caused a tricky race condition observed with uClibc buffered file read and UNIX pipes. 1. Read access to an anon mapped page in libc .bss: write-protected zero_page mapped: TLB Entry installed with Ur + K[rwx] 2. grep calls libc:getc() -> buffered read layer calls read(2) with the internal read buffer in same .bss page. The read() call is on STDIN which has been redirected to a pipe. read(2) => sys_read() => pipe_read() => copy_to_user() 3. Since page has Kernel-write permission (despite being user-mode write-protected), copy_to_user() suceeds w/o taking a MMU TLB-Miss Exception (page-fault for ARC). core-MM is unaware that kernel erroneously wrote to the reserved read-only zero-page (BUG #1) 4. Control returns to userspace which now does a write to same .bss page Since Linux MM is not aware that page has been modified by kernel, it simply reassigns a new writable zero-init page to mapping, loosing the prior write by kernel - effectively zero'ing out the libc read buffer under the hood - hence grep doesn't see right data (BUG #2) The fix is to make all kernel-mode access permissions mirror the user-mode ones. Note that the kernel still has full access to pages, when accessed directly (w/o MMU) - this fix ensures that kernel-mode access in copy_to_from() path uses the same faulting access model as for pure user accesses to keep MM fully aware of page state. The issue is peudo-random because it only shows up if the TLB entry installed in #1 is present at the time of #3. If it is evicted out, due to TLB pressure or some-such, then copy_to_user() does take a TLB Miss Exception, with a routine write-to-anon COW processing installing a fresh page for kernel writes and also usable as it is in userspace. Further the issue was dormant for so long as it depends on where the libc internal read buffer (in .bss) is mapped at runtime. If it happens to reside in file-backed data mapping of libc (in the page-aligned slack space trailing the file backed data), loader zero padding the slack space, does the early cow page replacement, setting things up at the very beginning itself. With gcc 4.8 based builds, the libc buffer got pushed out to a real anon mapping which triggers the issue. Reported-by: Anton Kolesov Cc: # 3.9 Signed-off-by: Vineet Gupta --- arch/arc/include/asm/pgtable.h | 26 +++++++++++++++----------- arch/arc/include/asm/tlb.h | 2 +- arch/arc/mm/tlbex.S | 6 +++--- 3 files changed, 19 insertions(+), 15 deletions(-) diff --git a/arch/arc/include/asm/pgtable.h b/arch/arc/include/asm/pgtable.h index 1cc4720faccb..95b1522212a7 100644 --- a/arch/arc/include/asm/pgtable.h +++ b/arch/arc/include/asm/pgtable.h @@ -57,9 +57,9 @@ #define _PAGE_ACCESSED (1<<1) /* Page is accessed (S) */ #define _PAGE_CACHEABLE (1<<2) /* Page is cached (H) */ -#define _PAGE_EXECUTE (1<<3) /* Page has user execute perm (H) */ -#define _PAGE_WRITE (1<<4) /* Page has user write perm (H) */ -#define _PAGE_READ (1<<5) /* Page has user read perm (H) */ +#define _PAGE_U_EXECUTE (1<<3) /* Page has user execute perm (H) */ +#define _PAGE_U_WRITE (1<<4) /* Page has user write perm (H) */ +#define _PAGE_U_READ (1<<5) /* Page has user read perm (H) */ #define _PAGE_K_EXECUTE (1<<6) /* Page has kernel execute perm (H) */ #define _PAGE_K_WRITE (1<<7) /* Page has kernel write perm (H) */ #define _PAGE_K_READ (1<<8) /* Page has kernel perm (H) */ @@ -72,9 +72,9 @@ /* PD1 */ #define _PAGE_CACHEABLE (1<<0) /* Page is cached (H) */ -#define _PAGE_EXECUTE (1<<1) /* Page has user execute perm (H) */ -#define _PAGE_WRITE (1<<2) /* Page has user write perm (H) */ -#define _PAGE_READ (1<<3) /* Page has user read perm (H) */ +#define _PAGE_U_EXECUTE (1<<1) /* Page has user execute perm (H) */ +#define _PAGE_U_WRITE (1<<2) /* Page has user write perm (H) */ +#define _PAGE_U_READ (1<<3) /* Page has user read perm (H) */ #define _PAGE_K_EXECUTE (1<<4) /* Page has kernel execute perm (H) */ #define _PAGE_K_WRITE (1<<5) /* Page has kernel write perm (H) */ #define _PAGE_K_READ (1<<6) /* Page has kernel perm (H) */ @@ -93,7 +93,8 @@ #endif /* Kernel allowed all permissions for all pages */ -#define _K_PAGE_PERMS (_PAGE_K_EXECUTE | _PAGE_K_WRITE | _PAGE_K_READ) +#define _K_PAGE_PERMS (_PAGE_K_EXECUTE | _PAGE_K_WRITE | _PAGE_K_READ | \ + _PAGE_GLOBAL | _PAGE_PRESENT) #ifdef CONFIG_ARC_CACHE_PAGES #define _PAGE_DEF_CACHEABLE _PAGE_CACHEABLE @@ -106,7 +107,11 @@ * -by default cached, unless config otherwise * -present in memory */ -#define ___DEF (_PAGE_PRESENT | _K_PAGE_PERMS | _PAGE_DEF_CACHEABLE) +#define ___DEF (_PAGE_PRESENT | _PAGE_DEF_CACHEABLE) + +#define _PAGE_READ (_PAGE_U_READ | _PAGE_K_READ) +#define _PAGE_WRITE (_PAGE_U_WRITE | _PAGE_K_WRITE) +#define _PAGE_EXECUTE (_PAGE_U_EXECUTE | _PAGE_K_EXECUTE) /* Set of bits not changed in pte_modify */ #define _PAGE_CHG_MASK (PAGE_MASK | _PAGE_ACCESSED | _PAGE_MODIFIED) @@ -125,11 +130,10 @@ * kernel vaddr space - visible in all addr spaces, but kernel mode only * Thus Global, all-kernel-access, no-user-access, cached */ -#define PAGE_KERNEL __pgprot(___DEF | _PAGE_GLOBAL) +#define PAGE_KERNEL __pgprot(_K_PAGE_PERMS | _PAGE_DEF_CACHEABLE) /* ioremap */ -#define PAGE_KERNEL_NO_CACHE __pgprot(_PAGE_PRESENT | _K_PAGE_PERMS | \ - _PAGE_GLOBAL) +#define PAGE_KERNEL_NO_CACHE __pgprot(_K_PAGE_PERMS) /************************************************************************** * Mapping of vm_flags (Generic VM) to PTE flags (arch specific) diff --git a/arch/arc/include/asm/tlb.h b/arch/arc/include/asm/tlb.h index 85b6df839bd7..cb0c708ca665 100644 --- a/arch/arc/include/asm/tlb.h +++ b/arch/arc/include/asm/tlb.h @@ -16,7 +16,7 @@ /* Masks for actual TLB "PD"s */ #define PTE_BITS_IN_PD0 (_PAGE_GLOBAL | _PAGE_PRESENT) #define PTE_BITS_IN_PD1 (PAGE_MASK | _PAGE_CACHEABLE | \ - _PAGE_EXECUTE | _PAGE_WRITE | _PAGE_READ | \ + _PAGE_U_EXECUTE | _PAGE_U_WRITE | _PAGE_U_READ | \ _PAGE_K_EXECUTE | _PAGE_K_WRITE | _PAGE_K_READ) #ifndef __ASSEMBLY__ diff --git a/arch/arc/mm/tlbex.S b/arch/arc/mm/tlbex.S index 9df765dc7c3a..3357d26ffe54 100644 --- a/arch/arc/mm/tlbex.S +++ b/arch/arc/mm/tlbex.S @@ -277,7 +277,7 @@ ARC_ENTRY EV_TLBMissI ;---------------------------------------------------------------- ; VERIFY_PTE: Check if PTE permissions approp for executing code cmp_s r2, VMALLOC_START - mov.lo r2, (_PAGE_PRESENT | _PAGE_READ | _PAGE_EXECUTE) + mov.lo r2, (_PAGE_PRESENT | _PAGE_U_READ | _PAGE_U_EXECUTE) mov.hs r2, (_PAGE_PRESENT | _PAGE_K_READ | _PAGE_K_EXECUTE) and r3, r0, r2 ; Mask out NON Flag bits from PTE @@ -320,9 +320,9 @@ ARC_ENTRY EV_TLBMissD mov_s r2, 0 lr r3, [ecr] btst_s r3, ECR_C_BIT_DTLB_LD_MISS ; Read Access - or.nz r2, r2, _PAGE_READ ; chk for Read flag in PTE + or.nz r2, r2, _PAGE_U_READ ; chk for Read flag in PTE btst_s r3, ECR_C_BIT_DTLB_ST_MISS ; Write Access - or.nz r2, r2, _PAGE_WRITE ; chk for Write flag in PTE + or.nz r2, r2, _PAGE_U_WRITE ; chk for Write flag in PTE ; Above laddering takes care of XCHG access ; which is both Read and Write -- cgit v1.2.3 From b5dd0bb43e209455fb83161d4c8774ce2c23f6e2 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Thu, 23 May 2013 08:04:09 +0200 Subject: microblaze: Use proper casting for inb/inw/inl in io.h We are going to move to asm-generic/io.h but let's fix compilation warnings first for 3.10. Warning message: arch/microblaze/include/asm/io.h:126:26: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] #define inb(port) readb((u8 *)((port))) ... Signed-off-by: Michal Simek --- arch/microblaze/include/asm/io.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/microblaze/include/asm/io.h b/arch/microblaze/include/asm/io.h index 8cb8a8566ede..2565cb94f32f 100644 --- a/arch/microblaze/include/asm/io.h +++ b/arch/microblaze/include/asm/io.h @@ -123,11 +123,11 @@ static inline void writel(unsigned int v, volatile void __iomem *addr) * inb_p/inw_p/... * The macros don't do byte-swapping. */ -#define inb(port) readb((u8 *)((port))) +#define inb(port) readb((u8 *)((unsigned long)(port))) #define outb(val, port) writeb((val), (u8 *)((unsigned long)(port))) -#define inw(port) readw((u16 *)((port))) +#define inw(port) readw((u16 *)((unsigned long)(port))) #define outw(val, port) writew((val), (u16 *)((unsigned long)(port))) -#define inl(port) readl((u32 *)((port))) +#define inl(port) readl((u32 *)((unsigned long)(port))) #define outl(val, port) writel((val), (u32 *)((unsigned long)(port))) #define inb_p(port) inb((port)) -- cgit v1.2.3 From 3e87974dec5ec25a8a4852d9292db6be659164e6 Mon Sep 17 00:00:00 2001 From: Vineet Gupta Date: Wed, 22 May 2013 18:38:10 +0530 Subject: ARC: Brown paper bag bug in macro for checking cache color The VM_EXEC check in update_mmu_cache() was getting optimized away because of a stupid error in definition of macro addr_not_cache_congruent() The intention was to have the equivalent of following: if (a || (1 ? b : 0)) but we ended up with following: if (a || 1 ? b : 0) And because precedence of '||' is more that that of '?', gcc was optimizing away evaluation of Nasty Repercussions: 1. For non-aliasing configs it would mean some extraneous dcache flushes for non-code pages if U/K mappings were not congruent. 2. For aliasing config, some needed dcache flush for code pages might be missed if U/K mappings were congruent. Signed-off-by: Vineet Gupta --- arch/arc/include/asm/cacheflush.h | 4 +++- arch/arc/mm/tlb.c | 3 ++- 2 files changed, 5 insertions(+), 2 deletions(-) diff --git a/arch/arc/include/asm/cacheflush.h b/arch/arc/include/asm/cacheflush.h index 9f841af41092..7d819749478c 100644 --- a/arch/arc/include/asm/cacheflush.h +++ b/arch/arc/include/asm/cacheflush.h @@ -99,8 +99,10 @@ static inline int cache_is_vipt_aliasing(void) * checks if two addresses (after page aligning) index into same cache set */ #define addr_not_cache_congruent(addr1, addr2) \ +({ \ cache_is_vipt_aliasing() ? \ - (CACHE_COLOR(addr1) != CACHE_COLOR(addr2)) : 0 \ + (CACHE_COLOR(addr1) != CACHE_COLOR(addr2)) : 0; \ +}) #define copy_to_user_page(vma, page, vaddr, dst, src, len) \ do { \ diff --git a/arch/arc/mm/tlb.c b/arch/arc/mm/tlb.c index 066145b5f348..fe1c5a073afe 100644 --- a/arch/arc/mm/tlb.c +++ b/arch/arc/mm/tlb.c @@ -444,7 +444,8 @@ void update_mmu_cache(struct vm_area_struct *vma, unsigned long vaddr_unaligned, * so userspace sees the right data. * (Avoids the flush for Non-exec + congruent mapping case) */ - if (vma->vm_flags & VM_EXEC || addr_not_cache_congruent(paddr, vaddr)) { + if ((vma->vm_flags & VM_EXEC) || + addr_not_cache_congruent(paddr, vaddr)) { struct page *page = pfn_to_page(pte_pfn(*ptep)); int dirty = test_and_clear_bit(PG_arch_1, &page->flags); -- cgit v1.2.3 From 006dfb3c9c44192f06093d65b3a876fa5ad1319a Mon Sep 17 00:00:00 2001 From: Vineet Gupta Date: Sun, 19 May 2013 14:06:44 +0530 Subject: ARC: Use enough bits for determining page's cache color The current code uses 2 bits for determining page's dcache color, thus sorting pages into 4 bins, whereas the aliasing dcache really has 2 bins (8k page, 64k dcache - 4 way-set-assoc). This can cause extraneous flushes - e.g. color 0 and 2. Signed-off-by: Vineet Gupta --- arch/arc/include/asm/cacheflush.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arc/include/asm/cacheflush.h b/arch/arc/include/asm/cacheflush.h index 7d819749478c..ef62682e8d95 100644 --- a/arch/arc/include/asm/cacheflush.h +++ b/arch/arc/include/asm/cacheflush.h @@ -93,7 +93,7 @@ static inline int cache_is_vipt_aliasing(void) #endif } -#define CACHE_COLOR(addr) (((unsigned long)(addr) >> (PAGE_SHIFT)) & 3) +#define CACHE_COLOR(addr) (((unsigned long)(addr) >> (PAGE_SHIFT)) & 1) /* * checks if two addresses (after page aligning) index into same cache set -- cgit v1.2.3 From 591a0ac7f14aae6bf11b1cb6b5a68480bd644ddb Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Thu, 23 May 2013 12:07:50 +0300 Subject: OMAPDSS: Fix crash with DT boot When booting with DT, there's a crash when omapfb is probed. This is caused by the fact that omapdss+DT is not yet supported, and thus omapdss is not probed at all. On the other hand, omapfb is always probed. When omapfb tries to use omapdss, there's a NULL pointer dereference crash. The same error should most likely happen with omapdrm and omap_vout also. To fix this, add an "initialized" state to omapdss. When omapdss has been probed, it's marked as initialized. omapfb, omapdrm and omap_vout check this state when they are probed to see that omapdss is actually there. Signed-off-by: Tomi Valkeinen Tested-by: Peter Ujfalusi --- drivers/gpu/drm/omapdrm/omap_drv.c | 3 +++ drivers/media/platform/omap/omap_vout.c | 3 +++ drivers/video/omap2/dss/core.c | 20 +++++++++++++++++++- drivers/video/omap2/omapfb/omapfb-main.c | 3 +++ include/video/omapdss.h | 1 + 5 files changed, 29 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/omapdrm/omap_drv.c b/drivers/gpu/drm/omapdrm/omap_drv.c index 079c54c6f94c..902074bbd1f4 100644 --- a/drivers/gpu/drm/omapdrm/omap_drv.c +++ b/drivers/gpu/drm/omapdrm/omap_drv.c @@ -548,6 +548,9 @@ static void pdev_shutdown(struct platform_device *device) static int pdev_probe(struct platform_device *device) { + if (omapdss_is_initialized() == false) + return -EPROBE_DEFER; + DBG("%s", device->name); return drm_platform_init(&omap_drm_driver, device); } diff --git a/drivers/media/platform/omap/omap_vout.c b/drivers/media/platform/omap/omap_vout.c index 96c4a17e4280..0a489bd29d6b 100644 --- a/drivers/media/platform/omap/omap_vout.c +++ b/drivers/media/platform/omap/omap_vout.c @@ -2144,6 +2144,9 @@ static int __init omap_vout_probe(struct platform_device *pdev) struct omap_dss_device *def_display; struct omap2video_device *vid_dev = NULL; + if (omapdss_is_initialized() == false) + return -EPROBE_DEFER; + ret = omapdss_compat_init(); if (ret) { dev_err(&pdev->dev, "failed to init dss\n"); diff --git a/drivers/video/omap2/dss/core.c b/drivers/video/omap2/dss/core.c index f8779d4750ba..f49ddb9e7c82 100644 --- a/drivers/video/omap2/dss/core.c +++ b/drivers/video/omap2/dss/core.c @@ -53,6 +53,8 @@ static char *def_disp_name; module_param_named(def_disp, def_disp_name, charp, 0); MODULE_PARM_DESC(def_disp, "default display name"); +static bool dss_initialized; + const char *omapdss_get_default_display_name(void) { return core.default_display_name; @@ -66,6 +68,12 @@ enum omapdss_version omapdss_get_version(void) } EXPORT_SYMBOL(omapdss_get_version); +bool omapdss_is_initialized(void) +{ + return dss_initialized; +} +EXPORT_SYMBOL(omapdss_is_initialized); + struct platform_device *dss_get_core_pdev(void) { return core.pdev; @@ -606,6 +614,8 @@ static int __init omap_dss_init(void) return r; } + dss_initialized = true; + return 0; } @@ -636,7 +646,15 @@ static int __init omap_dss_init(void) static int __init omap_dss_init2(void) { - return omap_dss_register_drivers(); + int r; + + r = omap_dss_register_drivers(); + if (r) + return r; + + dss_initialized = true; + + return 0; } core_initcall(omap_dss_init); diff --git a/drivers/video/omap2/omapfb/omapfb-main.c b/drivers/video/omap2/omapfb/omapfb-main.c index 717f13a93351..bb5f9fee3659 100644 --- a/drivers/video/omap2/omapfb/omapfb-main.c +++ b/drivers/video/omap2/omapfb/omapfb-main.c @@ -2416,6 +2416,9 @@ static int __init omapfb_probe(struct platform_device *pdev) DBG("omapfb_probe\n"); + if (omapdss_is_initialized() == false) + return -EPROBE_DEFER; + if (pdev->num_resources != 0) { dev_err(&pdev->dev, "probed for an unknown device\n"); r = -ENODEV; diff --git a/include/video/omapdss.h b/include/video/omapdss.h index caefa093337d..9b52340ec3ff 100644 --- a/include/video/omapdss.h +++ b/include/video/omapdss.h @@ -741,6 +741,7 @@ struct omap_dss_driver { }; enum omapdss_version omapdss_get_version(void); +bool omapdss_is_initialized(void); int omap_dss_register_driver(struct omap_dss_driver *); void omap_dss_unregister_driver(struct omap_dss_driver *); -- cgit v1.2.3 From 2a7851bffb008ff4882eee673da74718997b4265 Mon Sep 17 00:00:00 2001 From: Florian Westphal Date: Fri, 17 May 2013 03:56:10 +0000 Subject: netfilter: add nf_ipv6_ops hook to fix xt_addrtype with IPv6 Quoting https://bugzilla.netfilter.org/show_bug.cgi?id=812: [ ip6tables -m addrtype ] When I tried to use in the nat/PREROUTING it messes up the routing cache even if the rule didn't matched at all. [..] If I remove the --limit-iface-in from the non-working scenario, so just use the -m addrtype --dst-type LOCAL it works! This happens when LOCAL type matching is requested with --limit-iface-in, and the default ipv6 route is via the interface the packet we test arrived on. Because xt_addrtype uses ip6_route_output, the ipv6 routing implementation creates an unwanted cached entry, and the packet won't make it to the real/expected destination. Silently ignoring --limit-iface-in makes the routing work but it breaks rule matching (--dst-type LOCAL with limit-iface-in is supposed to only match if the dst address is configured on the incoming interface; without --limit-iface-in it will match if the address is reachable via lo). The test should call ipv6_chk_addr() instead. However, this would add a link-time dependency on ipv6. There are two possible solutions: 1) Revert the commit that moved ipt_addrtype to xt_addrtype, and put ipv6 specific code into ip6t_addrtype. 2) add new "nf_ipv6_ops" struct to register pointers to ipv6 functions. While the former might seem preferable, Pablo pointed out that there are more xt modules with link-time dependeny issues regarding ipv6, so lets go for 2). Signed-off-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso --- include/linux/netfilter_ipv6.h | 16 ++++++++++++++++ include/net/addrconf.h | 2 +- net/ipv6/addrconf.c | 2 +- net/ipv6/netfilter.c | 7 +++++++ net/netfilter/core.c | 2 ++ net/netfilter/xt_addrtype.c | 27 ++++++++++++++++----------- 6 files changed, 43 insertions(+), 13 deletions(-) diff --git a/include/linux/netfilter_ipv6.h b/include/linux/netfilter_ipv6.h index 98ffb54988b6..2d4df6ce043e 100644 --- a/include/linux/netfilter_ipv6.h +++ b/include/linux/netfilter_ipv6.h @@ -17,6 +17,22 @@ extern __sum16 nf_ip6_checksum(struct sk_buff *skb, unsigned int hook, extern int ipv6_netfilter_init(void); extern void ipv6_netfilter_fini(void); + +/* + * Hook functions for ipv6 to allow xt_* modules to be built-in even + * if IPv6 is a module. + */ +struct nf_ipv6_ops { + int (*chk_addr)(struct net *net, const struct in6_addr *addr, + const struct net_device *dev, int strict); +}; + +extern const struct nf_ipv6_ops __rcu *nf_ipv6_ops; +static inline const struct nf_ipv6_ops *nf_get_ipv6_ops(void) +{ + return rcu_dereference(nf_ipv6_ops); +} + #else /* CONFIG_NETFILTER */ static inline int ipv6_netfilter_init(void) { return 0; } static inline void ipv6_netfilter_fini(void) { return; } diff --git a/include/net/addrconf.h b/include/net/addrconf.h index 84a6440f1f19..21f702704f24 100644 --- a/include/net/addrconf.h +++ b/include/net/addrconf.h @@ -65,7 +65,7 @@ extern int addrconf_set_dstaddr(struct net *net, extern int ipv6_chk_addr(struct net *net, const struct in6_addr *addr, - struct net_device *dev, + const struct net_device *dev, int strict); #if defined(CONFIG_IPV6_MIP6) || defined(CONFIG_IPV6_MIP6_MODULE) diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c index d1ab6ab29a55..d1b2d8034b54 100644 --- a/net/ipv6/addrconf.c +++ b/net/ipv6/addrconf.c @@ -1487,7 +1487,7 @@ static int ipv6_count_addresses(struct inet6_dev *idev) } int ipv6_chk_addr(struct net *net, const struct in6_addr *addr, - struct net_device *dev, int strict) + const struct net_device *dev, int strict) { struct inet6_ifaddr *ifp; unsigned int hash = inet6_addr_hash(addr); diff --git a/net/ipv6/netfilter.c b/net/ipv6/netfilter.c index 72836f40b730..95f3f1da0d7f 100644 --- a/net/ipv6/netfilter.c +++ b/net/ipv6/netfilter.c @@ -10,6 +10,7 @@ #include #include #include +#include #include #include #include @@ -186,6 +187,10 @@ static __sum16 nf_ip6_checksum_partial(struct sk_buff *skb, unsigned int hook, return csum; }; +static const struct nf_ipv6_ops ipv6ops = { + .chk_addr = ipv6_chk_addr, +}; + static const struct nf_afinfo nf_ip6_afinfo = { .family = AF_INET6, .checksum = nf_ip6_checksum, @@ -198,6 +203,7 @@ static const struct nf_afinfo nf_ip6_afinfo = { int __init ipv6_netfilter_init(void) { + RCU_INIT_POINTER(nf_ipv6_ops, &ipv6ops); return nf_register_afinfo(&nf_ip6_afinfo); } @@ -206,5 +212,6 @@ int __init ipv6_netfilter_init(void) */ void ipv6_netfilter_fini(void) { + RCU_INIT_POINTER(nf_ipv6_ops, NULL); nf_unregister_afinfo(&nf_ip6_afinfo); } diff --git a/net/netfilter/core.c b/net/netfilter/core.c index 07c865a31a3d..857ca9f35177 100644 --- a/net/netfilter/core.c +++ b/net/netfilter/core.c @@ -30,6 +30,8 @@ static DEFINE_MUTEX(afinfo_mutex); const struct nf_afinfo __rcu *nf_afinfo[NFPROTO_NUMPROTO] __read_mostly; EXPORT_SYMBOL(nf_afinfo); +const struct nf_ipv6_ops __rcu *nf_ipv6_ops __read_mostly; +EXPORT_SYMBOL_GPL(nf_ipv6_ops); int nf_register_afinfo(const struct nf_afinfo *afinfo) { diff --git a/net/netfilter/xt_addrtype.c b/net/netfilter/xt_addrtype.c index 49c5ff7f6dd6..68ff29f60867 100644 --- a/net/netfilter/xt_addrtype.c +++ b/net/netfilter/xt_addrtype.c @@ -22,6 +22,7 @@ #include #endif +#include #include #include @@ -33,12 +34,12 @@ MODULE_ALIAS("ip6t_addrtype"); #if IS_ENABLED(CONFIG_IP6_NF_IPTABLES) static u32 match_lookup_rt6(struct net *net, const struct net_device *dev, - const struct in6_addr *addr) + const struct in6_addr *addr, u16 mask) { const struct nf_afinfo *afinfo; struct flowi6 flow; struct rt6_info *rt; - u32 ret; + u32 ret = 0; int route_err; memset(&flow, 0, sizeof(flow)); @@ -49,12 +50,19 @@ static u32 match_lookup_rt6(struct net *net, const struct net_device *dev, rcu_read_lock(); afinfo = nf_get_afinfo(NFPROTO_IPV6); - if (afinfo != NULL) + if (afinfo != NULL) { + const struct nf_ipv6_ops *v6ops; + + if (dev && (mask & XT_ADDRTYPE_LOCAL)) { + v6ops = nf_get_ipv6_ops(); + if (v6ops && v6ops->chk_addr(net, addr, dev, true)) + ret = XT_ADDRTYPE_LOCAL; + } route_err = afinfo->route(net, (struct dst_entry **)&rt, - flowi6_to_flowi(&flow), !!dev); - else + flowi6_to_flowi(&flow), false); + } else { route_err = 1; - + } rcu_read_unlock(); if (route_err) @@ -62,15 +70,12 @@ static u32 match_lookup_rt6(struct net *net, const struct net_device *dev, if (rt->rt6i_flags & RTF_REJECT) ret = XT_ADDRTYPE_UNREACHABLE; - else - ret = 0; - if (rt->rt6i_flags & RTF_LOCAL) + if (dev == NULL && rt->rt6i_flags & RTF_LOCAL) ret |= XT_ADDRTYPE_LOCAL; if (rt->rt6i_flags & RTF_ANYCAST) ret |= XT_ADDRTYPE_ANYCAST; - dst_release(&rt->dst); return ret; } @@ -90,7 +95,7 @@ static bool match_type6(struct net *net, const struct net_device *dev, if ((XT_ADDRTYPE_LOCAL | XT_ADDRTYPE_ANYCAST | XT_ADDRTYPE_UNREACHABLE) & mask) - return !!(mask & match_lookup_rt6(net, dev, addr)); + return !!(mask & match_lookup_rt6(net, dev, addr, mask)); return true; } -- cgit v1.2.3 From c5cca97fb915a90b1dcddf737062e67dd8656af8 Mon Sep 17 00:00:00 2001 From: Rob Clark Date: Wed, 22 May 2013 11:48:40 +0900 Subject: drm/exynos: use drm_send_vblank_event() helper Rebased. Signed-off-by: Rob Clark Signed-off-by: Inki Dae --- drivers/gpu/drm/exynos/exynos_drm_crtc.c | 10 ++-------- 1 file changed, 2 insertions(+), 8 deletions(-) diff --git a/drivers/gpu/drm/exynos/exynos_drm_crtc.c b/drivers/gpu/drm/exynos/exynos_drm_crtc.c index 02b36080d00b..db3decffc985 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_crtc.c +++ b/drivers/gpu/drm/exynos/exynos_drm_crtc.c @@ -397,7 +397,6 @@ void exynos_drm_crtc_finish_pageflip(struct drm_device *dev, int crtc) { struct exynos_drm_private *dev_priv = dev->dev_private; struct drm_pending_vblank_event *e, *t; - struct timeval now; unsigned long flags; DRM_DEBUG_KMS("%s\n", __FILE__); @@ -410,13 +409,8 @@ void exynos_drm_crtc_finish_pageflip(struct drm_device *dev, int crtc) if (crtc != e->pipe) continue; - do_gettimeofday(&now); - e->event.sequence = 0; - e->event.tv_sec = now.tv_sec; - e->event.tv_usec = now.tv_usec; - - list_move_tail(&e->base.link, &e->base.file_priv->event_list); - wake_up_interruptible(&e->base.file_priv->event_wait); + list_del(&e->base.link); + drm_send_vblank_event(dev, -1, e); drm_vblank_put(dev, crtc); } -- cgit v1.2.3 From 20cd2640a295cab46bcd08f4788984ca236fc148 Mon Sep 17 00:00:00 2001 From: Inki Dae Date: Tue, 21 May 2013 16:55:58 +0900 Subject: drm/exynos: wait for the completion of pending page flip This patch fixes the issue that drm_vblank_get() is failed. The issus occurs when next page flip request is tried if previous page flip event wasn't completed yet and then dpms became off. So this patch make sure that page flip event is completed before dpms goes to off. Signed-off-by: Inki Dae Signed-off-by: Kyungmin Park --- drivers/gpu/drm/exynos/exynos_drm_crtc.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/drivers/gpu/drm/exynos/exynos_drm_crtc.c b/drivers/gpu/drm/exynos/exynos_drm_crtc.c index db3decffc985..c200e4d71e3d 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_crtc.c +++ b/drivers/gpu/drm/exynos/exynos_drm_crtc.c @@ -48,6 +48,8 @@ struct exynos_drm_crtc { unsigned int pipe; unsigned int dpms; enum exynos_crtc_mode mode; + wait_queue_head_t pending_flip_queue; + atomic_t pending_flip; }; static void exynos_drm_crtc_dpms(struct drm_crtc *crtc, int mode) @@ -61,6 +63,13 @@ static void exynos_drm_crtc_dpms(struct drm_crtc *crtc, int mode) return; } + if (mode > DRM_MODE_DPMS_ON) { + /* wait for the completion of page flip. */ + wait_event(exynos_crtc->pending_flip_queue, + atomic_read(&exynos_crtc->pending_flip) == 0); + drm_vblank_off(crtc->dev, exynos_crtc->pipe); + } + exynos_drm_fn_encoder(crtc, &mode, exynos_drm_encoder_crtc_dpms); exynos_crtc->dpms = mode; } @@ -224,6 +233,7 @@ static int exynos_drm_crtc_page_flip(struct drm_crtc *crtc, spin_lock_irq(&dev->event_lock); list_add_tail(&event->base.link, &dev_priv->pageflip_event_list); + atomic_set(&exynos_crtc->pending_flip, 1); spin_unlock_irq(&dev->event_lock); crtc->fb = fb; @@ -343,6 +353,8 @@ int exynos_drm_crtc_create(struct drm_device *dev, unsigned int nr) exynos_crtc->pipe = nr; exynos_crtc->dpms = DRM_MODE_DPMS_OFF; + init_waitqueue_head(&exynos_crtc->pending_flip_queue); + atomic_set(&exynos_crtc->pending_flip, 0); exynos_crtc->plane = exynos_plane_init(dev, 1 << nr, true); if (!exynos_crtc->plane) { kfree(exynos_crtc); @@ -397,6 +409,8 @@ void exynos_drm_crtc_finish_pageflip(struct drm_device *dev, int crtc) { struct exynos_drm_private *dev_priv = dev->dev_private; struct drm_pending_vblank_event *e, *t; + struct drm_crtc *drm_crtc = dev_priv->crtc[crtc]; + struct exynos_drm_crtc *exynos_crtc = to_exynos_crtc(drm_crtc); unsigned long flags; DRM_DEBUG_KMS("%s\n", __FILE__); @@ -412,6 +426,8 @@ void exynos_drm_crtc_finish_pageflip(struct drm_device *dev, int crtc) list_del(&e->base.link); drm_send_vblank_event(dev, -1, e); drm_vblank_put(dev, crtc); + atomic_set(&exynos_crtc->pending_flip, 0); + wake_up(&exynos_crtc->pending_flip_queue); } spin_unlock_irqrestore(&dev->event_lock, flags); -- cgit v1.2.3 From d873ab99acd23dcd6860d8e605bc3146a4d4d9a2 Mon Sep 17 00:00:00 2001 From: Seung-Woo Kim Date: Wed, 22 May 2013 21:14:14 +0900 Subject: drm/exynos: cleanup device pointer usages Struct device pointer got from platform device pointer is already alsigned as variable, but some functions do not use device pointer. So this patch replaces thoes usages. Signed-off-by: Seung-Woo Kim Signed-off-by: Inki Dae --- drivers/gpu/drm/exynos/exynos_drm_fimc.c | 2 +- drivers/gpu/drm/exynos/exynos_drm_fimd.c | 10 +++++----- drivers/gpu/drm/exynos/exynos_drm_g2d.c | 6 +++--- drivers/gpu/drm/exynos/exynos_drm_gsc.c | 2 +- drivers/gpu/drm/exynos/exynos_drm_hdmi.c | 2 +- drivers/gpu/drm/exynos/exynos_drm_ipp.c | 4 ++-- drivers/gpu/drm/exynos/exynos_drm_vidi.c | 4 ++-- drivers/gpu/drm/exynos/exynos_hdmi.c | 14 +++++++------- drivers/gpu/drm/exynos/exynos_mixer.c | 14 +++++++------- 9 files changed, 29 insertions(+), 29 deletions(-) diff --git a/drivers/gpu/drm/exynos/exynos_drm_fimc.c b/drivers/gpu/drm/exynos/exynos_drm_fimc.c index 773f583fa964..754d76082eb3 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_fimc.c +++ b/drivers/gpu/drm/exynos/exynos_drm_fimc.c @@ -1884,7 +1884,7 @@ static int fimc_probe(struct platform_device *pdev) goto err_pm_dis; } - dev_info(&pdev->dev, "drm fimc registered successfully.\n"); + dev_info(dev, "drm fimc registered successfully.\n"); return 0; diff --git a/drivers/gpu/drm/exynos/exynos_drm_fimd.c b/drivers/gpu/drm/exynos/exynos_drm_fimd.c index 746b282b343a..97c61dbffd82 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_fimd.c +++ b/drivers/gpu/drm/exynos/exynos_drm_fimd.c @@ -885,7 +885,7 @@ static int fimd_probe(struct platform_device *pdev) DRM_DEBUG_KMS("%s\n", __FILE__); - if (pdev->dev.of_node) { + if (dev->of_node) { pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL); if (!pdata) { DRM_ERROR("memory allocation for pdata failed\n"); @@ -899,7 +899,7 @@ static int fimd_probe(struct platform_device *pdev) return ret; } } else { - pdata = pdev->dev.platform_data; + pdata = dev->platform_data; if (!pdata) { DRM_ERROR("no platform data specified\n"); return -EINVAL; @@ -912,7 +912,7 @@ static int fimd_probe(struct platform_device *pdev) return -EINVAL; } - ctx = devm_kzalloc(&pdev->dev, sizeof(*ctx), GFP_KERNEL); + ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL); if (!ctx) return -ENOMEM; @@ -930,7 +930,7 @@ static int fimd_probe(struct platform_device *pdev) res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - ctx->regs = devm_ioremap_resource(&pdev->dev, res); + ctx->regs = devm_ioremap_resource(dev, res); if (IS_ERR(ctx->regs)) return PTR_ERR(ctx->regs); @@ -942,7 +942,7 @@ static int fimd_probe(struct platform_device *pdev) ctx->irq = res->start; - ret = devm_request_irq(&pdev->dev, ctx->irq, fimd_irq_handler, + ret = devm_request_irq(dev, ctx->irq, fimd_irq_handler, 0, "drm_fimd", ctx); if (ret) { dev_err(dev, "irq request failed.\n"); diff --git a/drivers/gpu/drm/exynos/exynos_drm_g2d.c b/drivers/gpu/drm/exynos/exynos_drm_g2d.c index 47a493c8a71f..af75434ee4d7 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_g2d.c +++ b/drivers/gpu/drm/exynos/exynos_drm_g2d.c @@ -1379,7 +1379,7 @@ static int g2d_probe(struct platform_device *pdev) struct exynos_drm_subdrv *subdrv; int ret; - g2d = devm_kzalloc(&pdev->dev, sizeof(*g2d), GFP_KERNEL); + g2d = devm_kzalloc(dev, sizeof(*g2d), GFP_KERNEL); if (!g2d) { dev_err(dev, "failed to allocate driver data\n"); return -ENOMEM; @@ -1417,7 +1417,7 @@ static int g2d_probe(struct platform_device *pdev) res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - g2d->regs = devm_ioremap_resource(&pdev->dev, res); + g2d->regs = devm_ioremap_resource(dev, res); if (IS_ERR(g2d->regs)) { ret = PTR_ERR(g2d->regs); goto err_put_clk; @@ -1430,7 +1430,7 @@ static int g2d_probe(struct platform_device *pdev) goto err_put_clk; } - ret = devm_request_irq(&pdev->dev, g2d->irq, g2d_irq_handler, 0, + ret = devm_request_irq(dev, g2d->irq, g2d_irq_handler, 0, "drm_g2d", g2d); if (ret < 0) { dev_err(dev, "irq request failed\n"); diff --git a/drivers/gpu/drm/exynos/exynos_drm_gsc.c b/drivers/gpu/drm/exynos/exynos_drm_gsc.c index 7841c3b8a20e..487595ac51a8 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_gsc.c +++ b/drivers/gpu/drm/exynos/exynos_drm_gsc.c @@ -1743,7 +1743,7 @@ static int gsc_probe(struct platform_device *pdev) goto err_ippdrv_register; } - dev_info(&pdev->dev, "drm gsc registered successfully.\n"); + dev_info(dev, "drm gsc registered successfully.\n"); return 0; diff --git a/drivers/gpu/drm/exynos/exynos_drm_hdmi.c b/drivers/gpu/drm/exynos/exynos_drm_hdmi.c index ba2f0f1aa05f..437fb947e46d 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_hdmi.c +++ b/drivers/gpu/drm/exynos/exynos_drm_hdmi.c @@ -442,7 +442,7 @@ static int exynos_drm_hdmi_probe(struct platform_device *pdev) DRM_DEBUG_KMS("%s\n", __FILE__); - ctx = devm_kzalloc(&pdev->dev, sizeof(*ctx), GFP_KERNEL); + ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL); if (!ctx) { DRM_LOG_KMS("failed to alloc common hdmi context.\n"); return -ENOMEM; diff --git a/drivers/gpu/drm/exynos/exynos_drm_ipp.c b/drivers/gpu/drm/exynos/exynos_drm_ipp.c index 5c4764af7cb9..be1e88463466 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_ipp.c +++ b/drivers/gpu/drm/exynos/exynos_drm_ipp.c @@ -1909,7 +1909,7 @@ static int ipp_probe(struct platform_device *pdev) struct exynos_drm_subdrv *subdrv; int ret; - ctx = devm_kzalloc(&pdev->dev, sizeof(*ctx), GFP_KERNEL); + ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL); if (!ctx) return -ENOMEM; @@ -1963,7 +1963,7 @@ static int ipp_probe(struct platform_device *pdev) goto err_cmd_workq; } - dev_info(&pdev->dev, "drm ipp registered successfully.\n"); + dev_info(dev, "drm ipp registered successfully.\n"); return 0; diff --git a/drivers/gpu/drm/exynos/exynos_drm_vidi.c b/drivers/gpu/drm/exynos/exynos_drm_vidi.c index 9504b0cd825a..24376c194a5e 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_vidi.c +++ b/drivers/gpu/drm/exynos/exynos_drm_vidi.c @@ -594,7 +594,7 @@ static int vidi_probe(struct platform_device *pdev) DRM_DEBUG_KMS("%s\n", __FILE__); - ctx = devm_kzalloc(&pdev->dev, sizeof(*ctx), GFP_KERNEL); + ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL); if (!ctx) return -ENOMEM; @@ -612,7 +612,7 @@ static int vidi_probe(struct platform_device *pdev) platform_set_drvdata(pdev, ctx); - ret = device_create_file(&pdev->dev, &dev_attr_connection); + ret = device_create_file(dev, &dev_attr_connection); if (ret < 0) DRM_INFO("failed to create connection sysfs.\n"); diff --git a/drivers/gpu/drm/exynos/exynos_hdmi.c b/drivers/gpu/drm/exynos/exynos_hdmi.c index 7e99853f1e18..8d5dcd15e150 100644 --- a/drivers/gpu/drm/exynos/exynos_hdmi.c +++ b/drivers/gpu/drm/exynos/exynos_hdmi.c @@ -1946,14 +1946,14 @@ static int hdmi_probe(struct platform_device *pdev) DRM_DEBUG_KMS("[%d]\n", __LINE__); - if (pdev->dev.of_node) { + if (dev->of_node) { pdata = drm_hdmi_dt_parse_pdata(dev); if (IS_ERR(pdata)) { DRM_ERROR("failed to parse dt\n"); return PTR_ERR(pdata); } } else { - pdata = pdev->dev.platform_data; + pdata = dev->platform_data; } if (!pdata) { @@ -1961,14 +1961,14 @@ static int hdmi_probe(struct platform_device *pdev) return -EINVAL; } - drm_hdmi_ctx = devm_kzalloc(&pdev->dev, sizeof(*drm_hdmi_ctx), + drm_hdmi_ctx = devm_kzalloc(dev, sizeof(*drm_hdmi_ctx), GFP_KERNEL); if (!drm_hdmi_ctx) { DRM_ERROR("failed to allocate common hdmi context.\n"); return -ENOMEM; } - hdata = devm_kzalloc(&pdev->dev, sizeof(struct hdmi_context), + hdata = devm_kzalloc(dev, sizeof(struct hdmi_context), GFP_KERNEL); if (!hdata) { DRM_ERROR("out of memory\n"); @@ -1985,7 +1985,7 @@ static int hdmi_probe(struct platform_device *pdev) if (dev->of_node) { const struct of_device_id *match; match = of_match_node(of_match_ptr(hdmi_match_types), - pdev->dev.of_node); + dev->of_node); if (match == NULL) return -ENODEV; hdata->type = (enum hdmi_type)match->data; @@ -2010,11 +2010,11 @@ static int hdmi_probe(struct platform_device *pdev) return -ENOENT; } - hdata->regs = devm_ioremap_resource(&pdev->dev, res); + hdata->regs = devm_ioremap_resource(dev, res); if (IS_ERR(hdata->regs)) return PTR_ERR(hdata->regs); - ret = devm_gpio_request(&pdev->dev, hdata->hpd_gpio, "HPD"); + ret = devm_gpio_request(dev, hdata->hpd_gpio, "HPD"); if (ret) { DRM_ERROR("failed to request HPD gpio\n"); return ret; diff --git a/drivers/gpu/drm/exynos/exynos_mixer.c b/drivers/gpu/drm/exynos/exynos_mixer.c index ec3e376b7e01..7c197d3820c5 100644 --- a/drivers/gpu/drm/exynos/exynos_mixer.c +++ b/drivers/gpu/drm/exynos/exynos_mixer.c @@ -1061,7 +1061,7 @@ static int mixer_resources_init(struct exynos_drm_hdmi_context *ctx, return -ENXIO; } - mixer_res->mixer_regs = devm_ioremap(&pdev->dev, res->start, + mixer_res->mixer_regs = devm_ioremap(dev, res->start, resource_size(res)); if (mixer_res->mixer_regs == NULL) { dev_err(dev, "register mapping failed.\n"); @@ -1074,7 +1074,7 @@ static int mixer_resources_init(struct exynos_drm_hdmi_context *ctx, return -ENXIO; } - ret = devm_request_irq(&pdev->dev, res->start, mixer_irq_handler, + ret = devm_request_irq(dev, res->start, mixer_irq_handler, 0, "drm_mixer", ctx); if (ret) { dev_err(dev, "request interrupt failed.\n"); @@ -1118,7 +1118,7 @@ static int vp_resources_init(struct exynos_drm_hdmi_context *ctx, return -ENXIO; } - mixer_res->vp_regs = devm_ioremap(&pdev->dev, res->start, + mixer_res->vp_regs = devm_ioremap(dev, res->start, resource_size(res)); if (mixer_res->vp_regs == NULL) { dev_err(dev, "register mapping failed.\n"); @@ -1169,14 +1169,14 @@ static int mixer_probe(struct platform_device *pdev) dev_info(dev, "probe start\n"); - drm_hdmi_ctx = devm_kzalloc(&pdev->dev, sizeof(*drm_hdmi_ctx), + drm_hdmi_ctx = devm_kzalloc(dev, sizeof(*drm_hdmi_ctx), GFP_KERNEL); if (!drm_hdmi_ctx) { DRM_ERROR("failed to allocate common hdmi context.\n"); return -ENOMEM; } - ctx = devm_kzalloc(&pdev->dev, sizeof(*ctx), GFP_KERNEL); + ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL); if (!ctx) { DRM_ERROR("failed to alloc mixer context.\n"); return -ENOMEM; @@ -1187,14 +1187,14 @@ static int mixer_probe(struct platform_device *pdev) if (dev->of_node) { const struct of_device_id *match; match = of_match_node(of_match_ptr(mixer_match_types), - pdev->dev.of_node); + dev->of_node); drv = (struct mixer_drv_data *)match->data; } else { drv = (struct mixer_drv_data *) platform_get_device_id(pdev)->driver_data; } - ctx->dev = &pdev->dev; + ctx->dev = dev; ctx->parent_ctx = (void *)drm_hdmi_ctx; drm_hdmi_ctx->ctx = (void *)ctx; ctx->vp_enabled = drv->is_vp_enabled; -- cgit v1.2.3 From a3ad6976fe5a306fc6cb9e423ac0ef2f06f79189 Mon Sep 17 00:00:00 2001 From: Seung-Woo Kim Date: Wed, 22 May 2013 21:14:15 +0900 Subject: drm/exynos: fix build warnings from ipp fimc Becuase of order of headers, there are build warnings and they are fixed with this patch. Signed-off-by: Seung-Woo Kim Signed-off-by: Inki Dae --- drivers/gpu/drm/exynos/exynos_drm_fimc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/exynos/exynos_drm_fimc.c b/drivers/gpu/drm/exynos/exynos_drm_fimc.c index 754d76082eb3..75c50f5fe0ed 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_fimc.c +++ b/drivers/gpu/drm/exynos/exynos_drm_fimc.c @@ -12,9 +12,9 @@ * */ #include -#include #include #include +#include #include #include #include -- cgit v1.2.3 From 7a1b00e0728ff20d6c8e2d6335da05d13d03ef74 Mon Sep 17 00:00:00 2001 From: Seung-Woo Kim Date: Wed, 22 May 2013 21:14:16 +0900 Subject: drm/exynos: remove unnecessary devm_kfree devm_kfree does not need for fail case of probe function and for remove function. Signed-off-by: Seung-Woo Kim Signed-off-by: Inki Dae --- drivers/gpu/drm/exynos/exynos_drm_gsc.c | 2 -- drivers/gpu/drm/exynos/exynos_drm_rotator.c | 2 -- 2 files changed, 4 deletions(-) diff --git a/drivers/gpu/drm/exynos/exynos_drm_gsc.c b/drivers/gpu/drm/exynos/exynos_drm_gsc.c index 487595ac51a8..98032d6c62c3 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_gsc.c +++ b/drivers/gpu/drm/exynos/exynos_drm_gsc.c @@ -1748,7 +1748,6 @@ static int gsc_probe(struct platform_device *pdev) return 0; err_ippdrv_register: - devm_kfree(dev, ippdrv->prop_list); pm_runtime_disable(dev); err_get_irq: free_irq(ctx->irq, ctx); @@ -1761,7 +1760,6 @@ static int gsc_remove(struct platform_device *pdev) struct gsc_context *ctx = get_gsc_context(dev); struct exynos_drm_ippdrv *ippdrv = &ctx->ippdrv; - devm_kfree(dev, ippdrv->prop_list); exynos_drm_ippdrv_unregister(ippdrv); mutex_destroy(&ctx->lock); diff --git a/drivers/gpu/drm/exynos/exynos_drm_rotator.c b/drivers/gpu/drm/exynos/exynos_drm_rotator.c index 947f09f15ad1..3aa502a6cf21 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_rotator.c +++ b/drivers/gpu/drm/exynos/exynos_drm_rotator.c @@ -709,7 +709,6 @@ static int rotator_probe(struct platform_device *pdev) return 0; err_ippdrv_register: - devm_kfree(dev, ippdrv->prop_list); pm_runtime_disable(dev); err_clk_get: free_irq(rot->irq, rot); @@ -722,7 +721,6 @@ static int rotator_remove(struct platform_device *pdev) struct rot_context *rot = dev_get_drvdata(dev); struct exynos_drm_ippdrv *ippdrv = &rot->ippdrv; - devm_kfree(dev, ippdrv->prop_list); exynos_drm_ippdrv_unregister(ippdrv); pm_runtime_disable(dev); -- cgit v1.2.3 From dcb9a7c74acf59679a537e6fcc7a99c12353e7b8 Mon Sep 17 00:00:00 2001 From: Seung-Woo Kim Date: Wed, 22 May 2013 21:14:17 +0900 Subject: drm/exynos: replace request_threaded_irq with devm function devm_request_threaded_irq is used instead of request_threaded_irq and free_irq is removed. Signed-off-by: Seung-Woo Kim Signed-off-by: Inki Dae --- drivers/gpu/drm/exynos/exynos_drm_fimc.c | 8 ++------ drivers/gpu/drm/exynos/exynos_drm_gsc.c | 8 ++------ drivers/gpu/drm/exynos/exynos_drm_rotator.c | 11 +++-------- drivers/gpu/drm/exynos/exynos_hdmi.c | 7 +------ 4 files changed, 8 insertions(+), 26 deletions(-) diff --git a/drivers/gpu/drm/exynos/exynos_drm_fimc.c b/drivers/gpu/drm/exynos/exynos_drm_fimc.c index 75c50f5fe0ed..4a1616a18ab7 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_fimc.c +++ b/drivers/gpu/drm/exynos/exynos_drm_fimc.c @@ -1845,7 +1845,7 @@ static int fimc_probe(struct platform_device *pdev) } ctx->irq = res->start; - ret = request_threaded_irq(ctx->irq, NULL, fimc_irq_handler, + ret = devm_request_threaded_irq(dev, ctx->irq, NULL, fimc_irq_handler, IRQF_ONESHOT, "drm_fimc", ctx); if (ret < 0) { dev_err(dev, "failed to request irq.\n"); @@ -1854,7 +1854,7 @@ static int fimc_probe(struct platform_device *pdev) ret = fimc_setup_clocks(ctx); if (ret < 0) - goto err_free_irq; + return ret; ippdrv = &ctx->ippdrv; ippdrv->ops[EXYNOS_DRM_OPS_SRC] = &fimc_src_ops; @@ -1892,8 +1892,6 @@ err_pm_dis: pm_runtime_disable(dev); err_put_clk: fimc_put_clocks(ctx); -err_free_irq: - free_irq(ctx->irq, ctx); return ret; } @@ -1911,8 +1909,6 @@ static int fimc_remove(struct platform_device *pdev) pm_runtime_set_suspended(dev); pm_runtime_disable(dev); - free_irq(ctx->irq, ctx); - return 0; } diff --git a/drivers/gpu/drm/exynos/exynos_drm_gsc.c b/drivers/gpu/drm/exynos/exynos_drm_gsc.c index 98032d6c62c3..762f40d548b7 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_gsc.c +++ b/drivers/gpu/drm/exynos/exynos_drm_gsc.c @@ -1704,7 +1704,7 @@ static int gsc_probe(struct platform_device *pdev) } ctx->irq = res->start; - ret = request_threaded_irq(ctx->irq, NULL, gsc_irq_handler, + ret = devm_request_threaded_irq(dev, ctx->irq, NULL, gsc_irq_handler, IRQF_ONESHOT, "drm_gsc", ctx); if (ret < 0) { dev_err(dev, "failed to request irq.\n"); @@ -1725,7 +1725,7 @@ static int gsc_probe(struct platform_device *pdev) ret = gsc_init_prop_list(ippdrv); if (ret < 0) { dev_err(dev, "failed to init property list.\n"); - goto err_get_irq; + return ret; } DRM_DEBUG_KMS("%s:id[%d]ippdrv[0x%x]\n", __func__, ctx->id, @@ -1749,8 +1749,6 @@ static int gsc_probe(struct platform_device *pdev) err_ippdrv_register: pm_runtime_disable(dev); -err_get_irq: - free_irq(ctx->irq, ctx); return ret; } @@ -1766,8 +1764,6 @@ static int gsc_remove(struct platform_device *pdev) pm_runtime_set_suspended(dev); pm_runtime_disable(dev); - free_irq(ctx->irq, ctx); - return 0; } diff --git a/drivers/gpu/drm/exynos/exynos_drm_rotator.c b/drivers/gpu/drm/exynos/exynos_drm_rotator.c index 3aa502a6cf21..9b6c70964d71 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_rotator.c +++ b/drivers/gpu/drm/exynos/exynos_drm_rotator.c @@ -666,8 +666,8 @@ static int rotator_probe(struct platform_device *pdev) return rot->irq; } - ret = request_threaded_irq(rot->irq, NULL, rotator_irq_handler, - IRQF_ONESHOT, "drm_rotator", rot); + ret = devm_request_threaded_irq(dev, rot->irq, NULL, + rotator_irq_handler, IRQF_ONESHOT, "drm_rotator", rot); if (ret < 0) { dev_err(dev, "failed to request irq\n"); return ret; @@ -676,8 +676,7 @@ static int rotator_probe(struct platform_device *pdev) rot->clock = devm_clk_get(dev, "rotator"); if (IS_ERR(rot->clock)) { dev_err(dev, "failed to get clock\n"); - ret = PTR_ERR(rot->clock); - goto err_clk_get; + return PTR_ERR(rot->clock); } pm_runtime_enable(dev); @@ -710,8 +709,6 @@ static int rotator_probe(struct platform_device *pdev) err_ippdrv_register: pm_runtime_disable(dev); -err_clk_get: - free_irq(rot->irq, rot); return ret; } @@ -725,8 +722,6 @@ static int rotator_remove(struct platform_device *pdev) pm_runtime_disable(dev); - free_irq(rot->irq, rot); - return 0; } diff --git a/drivers/gpu/drm/exynos/exynos_hdmi.c b/drivers/gpu/drm/exynos/exynos_hdmi.c index 8d5dcd15e150..2f785325d6de 100644 --- a/drivers/gpu/drm/exynos/exynos_hdmi.c +++ b/drivers/gpu/drm/exynos/exynos_hdmi.c @@ -2046,7 +2046,7 @@ static int hdmi_probe(struct platform_device *pdev) hdata->hpd = gpio_get_value(hdata->hpd_gpio); - ret = request_threaded_irq(hdata->irq, NULL, + ret = devm_request_threaded_irq(dev, hdata->irq, NULL, hdmi_irq_thread, IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | IRQF_ONESHOT, "hdmi", drm_hdmi_ctx); @@ -2075,16 +2075,11 @@ err_ddc: static int hdmi_remove(struct platform_device *pdev) { struct device *dev = &pdev->dev; - struct exynos_drm_hdmi_context *ctx = platform_get_drvdata(pdev); - struct hdmi_context *hdata = ctx->ctx; DRM_DEBUG_KMS("[%d] %s\n", __LINE__, __func__); pm_runtime_disable(dev); - free_irq(hdata->irq, ctx); - - /* hdmiphy i2c driver */ i2c_del_driver(&hdmiphy_driver); /* DDC i2c driver */ -- cgit v1.2.3 From 4f36ea6eed2081340c7a7aa98c73187ecfccebff Mon Sep 17 00:00:00 2001 From: Chen Gang Date: Thu, 23 May 2013 01:50:46 +0000 Subject: netfilter: ipt_ULOG: fix non-null terminated string in the nf_log path If nf_log uses ipt_ULOG as logging output, we can deliver non-null terminated strings to user-space since the maximum length of the prefix that is passed by nf_log is NF_LOG_PREFIXLEN but pm->prefix is 32 bytes long (ULOG_PREFIX_LEN). This is actually happening already from nf_conntrack_tcp if ipt_ULOG is used, since it is passing strings longer than 32 bytes. Signed-off-by: Chen Gang Signed-off-by: Pablo Neira Ayuso --- net/ipv4/netfilter/ipt_ULOG.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/net/ipv4/netfilter/ipt_ULOG.c b/net/ipv4/netfilter/ipt_ULOG.c index cf08218ddbcf..ff4b781b1056 100644 --- a/net/ipv4/netfilter/ipt_ULOG.c +++ b/net/ipv4/netfilter/ipt_ULOG.c @@ -231,8 +231,10 @@ static void ipt_ulog_packet(struct net *net, put_unaligned(tv.tv_usec, &pm->timestamp_usec); put_unaligned(skb->mark, &pm->mark); pm->hook = hooknum; - if (prefix != NULL) - strncpy(pm->prefix, prefix, sizeof(pm->prefix)); + if (prefix != NULL) { + strncpy(pm->prefix, prefix, sizeof(pm->prefix) - 1); + pm->prefix[sizeof(pm->prefix) - 1] = '\0'; + } else if (loginfo->prefix[0] != '\0') strncpy(pm->prefix, loginfo->prefix, sizeof(pm->prefix)); else -- cgit v1.2.3 From d47333ddb234dbc661ab2a4fe019758bd33ba33b Mon Sep 17 00:00:00 2001 From: Torsten Schenk Date: Thu, 23 May 2013 13:38:29 +0200 Subject: ALSA: usb-6fire: Modify firmware version check Check only the uppermost 16 bits instead of the whole 32 bits of the version information. Do this because all firmware version tested with this version information worked correctly and the strict check causes problems for several users. Signed-off-by: Torsten Schenk Signed-off-by: Takashi Iwai --- sound/usb/6fire/firmware.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/sound/usb/6fire/firmware.c b/sound/usb/6fire/firmware.c index a1d9b0792a1e..b9defcdeb7ef 100644 --- a/sound/usb/6fire/firmware.c +++ b/sound/usb/6fire/firmware.c @@ -42,8 +42,8 @@ static const u8 ep_w_max_packet_size[] = { 0x94, 0x01, 0x5c, 0x02 /* alt 3: 404 EP2 and 604 EP6 (25 fpp) */ }; -static const u8 known_fw_versions[][4] = { - { 0x03, 0x01, 0x0b, 0x00 } +static const u8 known_fw_versions[][2] = { + { 0x03, 0x01 } }; struct ihex_record { @@ -343,7 +343,7 @@ static int usb6fire_fw_check(u8 *version) int i; for (i = 0; i < ARRAY_SIZE(known_fw_versions); i++) - if (!memcmp(version, known_fw_versions + i, 4)) + if (!memcmp(version, known_fw_versions + i, 2)) return 0; snd_printk(KERN_ERR PREFIX "invalid fimware version in device: %*ph. " -- cgit v1.2.3 From ca1643186d3dce6171d8f171e516b02496360a9e Mon Sep 17 00:00:00 2001 From: "Steven Rostedt (Red Hat)" Date: Thu, 23 May 2013 11:51:10 -0400 Subject: tracing: Fix crash when ftrace=nop on the kernel command line If ftrace= is on the kernel command line, when that tracer is registered, it will be initiated by tracing_set_tracer() to execute that tracer. The nop tracer is just a stub tracer that is used to have no tracer enabled. It is assigned at early bootup as it is the default tracer. But if ftrace=nop is on the kernel command line, the registering of the nop tracer will call tracing_set_tracer() which will try to execute the nop tracer. But it expects tr->current_trace to be assigned something as it usually is assigned to the nop tracer. As it hasn't been assigned to anything yet, it causes the system to crash. The simple fix is to move the tr->current_trace = nop before registering the nop tracer. The functionality is still the same as the nop tracer doesn't do anything anyway. Reported-by: Peter Zijlstra Signed-off-by: Steven Rostedt --- kernel/trace/trace.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index ae6fa2d1cdf7..4d79485b3237 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -6216,10 +6216,15 @@ __init static int tracer_alloc_buffers(void) trace_init_cmdlines(); - register_tracer(&nop_trace); - + /* + * register_tracer() might reference current_trace, so it + * needs to be set before we register anything. This is + * just a bootstrap of current_trace anyway. + */ global_trace.current_trace = &nop_trace; + register_tracer(&nop_trace); + /* All seems OK, enable tracing */ tracing_disabled = 0; -- cgit v1.2.3 From c815797663b72e3ac1736f1886538152bc48e4af Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 23 May 2013 18:10:21 +0200 Subject: cfg80211: check wdev->netdev in connection work If a P2P-Device is present and another virtual interface triggers the connection work, the system crash because it tries to check if the P2P-Device's netdev (which doesn't exist) is up. Skip any wdevs that have no netdev to fix this. Cc: stable@vger.kernel.org Reported-by: YanBo Signed-off-by: Johannes Berg --- net/wireless/sme.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/net/wireless/sme.c b/net/wireless/sme.c index 8b5eddfba1e5..3ed35c345cae 100644 --- a/net/wireless/sme.c +++ b/net/wireless/sme.c @@ -231,6 +231,9 @@ void cfg80211_conn_work(struct work_struct *work) mutex_lock(&rdev->sched_scan_mtx); list_for_each_entry(wdev, &rdev->wdev_list, list) { + if (!wdev->netdev) + continue; + wdev_lock(wdev); if (!netif_running(wdev->netdev)) { wdev_unlock(wdev); -- cgit v1.2.3 From 2b436312f0919c05804fed5aa4b7f255db196e7a Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 23 May 2013 21:04:38 +0200 Subject: mac80211: fix queue handling crash The code I added in "mac80211: don't start new netdev queues if driver stopped" crashes for monitor and AP VLAN interfaces because while they have a netdev, they don't have queues set up by the driver. To fix the crash, exclude these from queue accounting here and just start their netdev queues unconditionally. For monitor, this is the best we can do, as we can redirect frames there to any other interface and don't know which one that will since it can be different for each frame. For AP VLAN interfaces, we can do better later and actually properly track the queue status. Not doing this is really a separate bug though. Reported-by: Ilan Peer Reported-by: Jouni Malinen Signed-off-by: Johannes Berg --- net/mac80211/iface.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c index 60f1ce5e5e52..68f51c3af49f 100644 --- a/net/mac80211/iface.c +++ b/net/mac80211/iface.c @@ -653,7 +653,11 @@ int ieee80211_do_open(struct wireless_dev *wdev, bool coming_up) ieee80211_recalc_ps(local, -1); - if (dev) { + if (sdata->vif.type == NL80211_IFTYPE_MONITOR || + sdata->vif.type == NL80211_IFTYPE_AP_VLAN) { + /* XXX: for AP_VLAN, actually track AP queues */ + netif_tx_start_all_queues(dev); + } else if (dev) { unsigned long flags; int n_acs = IEEE80211_NUM_ACS; int ac; -- cgit v1.2.3 From 4325d724cd91643c727ca4cb063e8bb19989950b Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Thu, 23 May 2013 15:05:59 +0200 Subject: cfg80211: fix reporting 64-bit station info tx bytes Copy & paste mistake - STATION_INFO_TX_BYTES64 is the name of the flag, not NL80211_STA_INFO_TX_BYTES64. Signed-off-by: Felix Fietkau Signed-off-by: Johannes Berg --- net/wireless/nl80211.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index dfdb5e643211..d5aed3bb3945 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -3411,7 +3411,7 @@ static int nl80211_send_station(struct sk_buff *msg, u32 portid, u32 seq, (u32)sinfo->rx_bytes)) goto nla_put_failure; if ((sinfo->filled & (STATION_INFO_TX_BYTES | - NL80211_STA_INFO_TX_BYTES64)) && + STATION_INFO_TX_BYTES64)) && nla_put_u32(msg, NL80211_STA_INFO_TX_BYTES, (u32)sinfo->tx_bytes)) goto nla_put_failure; -- cgit v1.2.3 From 83c168bf8017212a9d502536f9dcd0b54d24e330 Mon Sep 17 00:00:00 2001 From: Chuck Lever Date: Wed, 15 May 2013 22:00:10 -0400 Subject: NFS: Fix SETCLIENTID fallback if GSS is not available Commit 79d852bf "NFS: Retry SETCLIENTID with AUTH_SYS instead of AUTH_NONE" did not take into account commit 23631227 "NFSv4: Fix the fallback to AUTH_NULL if krb5i is not available". Signed-off-by: Chuck Lever Signed-off-by: Trond Myklebust --- fs/nfs/nfs4client.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/nfs/nfs4client.c b/fs/nfs/nfs4client.c index 947b0c908aa9..4cbad5d6b276 100644 --- a/fs/nfs/nfs4client.c +++ b/fs/nfs/nfs4client.c @@ -203,7 +203,7 @@ struct nfs_client *nfs4_init_client(struct nfs_client *clp, __set_bit(NFS_CS_DISCRTRY, &clp->cl_flags); error = nfs_create_rpc_client(clp, timeparms, RPC_AUTH_GSS_KRB5I); if (error == -EINVAL) - error = nfs_create_rpc_client(clp, timeparms, RPC_AUTH_NULL); + error = nfs_create_rpc_client(clp, timeparms, RPC_AUTH_UNIX); if (error < 0) goto error; -- cgit v1.2.3 From 7805d000db30a3787a4c969bab6ae4d8a5fd8ce6 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Fri, 24 May 2013 10:50:24 +0900 Subject: cgroup: fix a subtle bug in descendant pre-order walk When cgroup_next_descendant_pre() initiates a walk, it checks whether the subtree root doesn't have any children and if not returns NULL. Later code assumes that the subtree isn't empty. This is broken because the subtree may become empty inbetween, which can lead to the traversal escaping the subtree by walking to the sibling of the subtree root. There's no reason to have the early exit path. Remove it along with the later assumption that the subtree isn't empty. This simplifies the code a bit and fixes the subtle bug. While at it, fix the comment of cgroup_for_each_descendant_pre() which was incorrectly referring to ->css_offline() instead of ->css_online(). Signed-off-by: Tejun Heo Reviewed-by: Michal Hocko Cc: stable@vger.kernel.org --- include/linux/cgroup.h | 2 +- kernel/cgroup.c | 9 +++------ 2 files changed, 4 insertions(+), 7 deletions(-) diff --git a/include/linux/cgroup.h b/include/linux/cgroup.h index 5047355b9a0f..8bda1294c035 100644 --- a/include/linux/cgroup.h +++ b/include/linux/cgroup.h @@ -707,7 +707,7 @@ struct cgroup *cgroup_rightmost_descendant(struct cgroup *pos); * * If a subsystem synchronizes against the parent in its ->css_online() and * before starting iterating, and synchronizes against @pos on each - * iteration, any descendant cgroup which finished ->css_offline() is + * iteration, any descendant cgroup which finished ->css_online() is * guaranteed to be visible in the future iterations. * * In other words, the following guarantees that a descendant can't escape diff --git a/kernel/cgroup.c b/kernel/cgroup.c index 38b136553044..31e9ef319070 100644 --- a/kernel/cgroup.c +++ b/kernel/cgroup.c @@ -2954,11 +2954,8 @@ struct cgroup *cgroup_next_descendant_pre(struct cgroup *pos, WARN_ON_ONCE(!rcu_read_lock_held()); /* if first iteration, pretend we just visited @cgroup */ - if (!pos) { - if (list_empty(&cgroup->children)) - return NULL; + if (!pos) pos = cgroup; - } /* visit the first child if exists */ next = list_first_or_null_rcu(&pos->children, struct cgroup, sibling); @@ -2966,14 +2963,14 @@ struct cgroup *cgroup_next_descendant_pre(struct cgroup *pos, return next; /* no child, visit my or the closest ancestor's next sibling */ - do { + while (pos != cgroup) { next = list_entry_rcu(pos->sibling.next, struct cgroup, sibling); if (&next->sibling != &pos->parent->children) return next; pos = pos->parent; - } while (pos != cgroup); + } return NULL; } -- cgit v1.2.3 From 029efddab6967f755c21f47b0bc456f1a546805f Mon Sep 17 00:00:00 2001 From: Jean-Christophe PLAGNIOL-VILLARD Date: Fri, 24 May 2013 00:59:16 +0200 Subject: ARM: at91: at91sam9n12: move external irq declatation to DT Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD Signed-off-by: Nicolas Ferre --- arch/arm/boot/dts/at91sam9n12.dtsi | 1 + arch/arm/mach-at91/at91sam9n12.c | 6 ------ 2 files changed, 1 insertion(+), 6 deletions(-) diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi index 3de8e6dfbcb1..8d25f889928e 100644 --- a/arch/arm/boot/dts/at91sam9n12.dtsi +++ b/arch/arm/boot/dts/at91sam9n12.dtsi @@ -57,6 +57,7 @@ compatible = "atmel,at91rm9200-aic"; interrupt-controller; reg = <0xfffff000 0x200>; + atmel,external-irqs = <31>; }; ramc0: ramc@ffffe800 { diff --git a/arch/arm/mach-at91/at91sam9n12.c b/arch/arm/mach-at91/at91sam9n12.c index 13cdbcd48f51..c7d670d11802 100644 --- a/arch/arm/mach-at91/at91sam9n12.c +++ b/arch/arm/mach-at91/at91sam9n12.c @@ -223,13 +223,7 @@ static void __init at91sam9n12_map_io(void) at91_init_sram(0, AT91SAM9N12_SRAM_BASE, AT91SAM9N12_SRAM_SIZE); } -void __init at91sam9n12_initialize(void) -{ - at91_extern_irq = (1 << AT91SAM9N12_ID_IRQ0); -} - AT91_SOC_START(at91sam9n12) .map_io = at91sam9n12_map_io, .register_clocks = at91sam9n12_register_clocks, - .init = at91sam9n12_initialize, AT91_SOC_END -- cgit v1.2.3 From f6d35d67d0a5c159f767a20f4fcc1d295a7314b1 Mon Sep 17 00:00:00 2001 From: Boris BREZILLON Date: Thu, 23 May 2013 18:01:21 +0200 Subject: ARM: at91/dt: fix macb pinctrl_macb_rmii_mii_alt definition The PA24 pin is wrongly assigned to peripheral B. In the current config there is 2 ETX3 pins (PA11 and PA24) and no ETXER pin (PA22). Signed-off-by: Boris BREZILLON Signed-off-by: Nicolas Ferre Cc: stable # 3.8+ --- arch/arm/boot/dts/at91sam9260.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi index 70b5ccbac234..84c4bef2d726 100644 --- a/arch/arm/boot/dts/at91sam9260.dtsi +++ b/arch/arm/boot/dts/at91sam9260.dtsi @@ -264,7 +264,7 @@ atmel,pins = <0 10 0x2 0x0 /* PA10 periph B */ 0 11 0x2 0x0 /* PA11 periph B */ - 0 24 0x2 0x0 /* PA24 periph B */ + 0 22 0x2 0x0 /* PA22 periph B */ 0 25 0x2 0x0 /* PA25 periph B */ 0 26 0x2 0x0 /* PA26 periph B */ 0 27 0x2 0x0 /* PA27 periph B */ -- cgit v1.2.3 From 144ea15e4fefbee14a7dcb05c7cd0822fda3ebf6 Mon Sep 17 00:00:00 2001 From: Josh Wu Date: Thu, 23 May 2013 10:18:48 +0000 Subject: ARM: at91/sama5: fix incorrect PMC pcr div definition Signed-off-by: Josh Wu Acked-by: Jean-Christophe PLAGNIOL-VILLARD Acked-by: Ludovic Desroches Signed-off-by: Nicolas Ferre --- arch/arm/mach-at91/include/mach/at91_pmc.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/arm/mach-at91/include/mach/at91_pmc.h b/arch/arm/mach-at91/include/mach/at91_pmc.h index 31df12029c4e..2bd7f51b0b82 100644 --- a/arch/arm/mach-at91/include/mach/at91_pmc.h +++ b/arch/arm/mach-at91/include/mach/at91_pmc.h @@ -179,9 +179,9 @@ extern void __iomem *at91_pmc_base; #define AT91_PMC_PCR_CMD (0x1 << 12) /* Command (read=0, write=1) */ #define AT91_PMC_PCR_DIV(n) ((n) << 16) /* Divisor Value */ #define AT91_PMC_PCR_DIV0 0x0 /* Peripheral clock is MCK */ -#define AT91_PMC_PCR_DIV2 0x2 /* Peripheral clock is MCK/2 */ -#define AT91_PMC_PCR_DIV4 0x4 /* Peripheral clock is MCK/4 */ -#define AT91_PMC_PCR_DIV8 0x8 /* Peripheral clock is MCK/8 */ +#define AT91_PMC_PCR_DIV2 0x1 /* Peripheral clock is MCK/2 */ +#define AT91_PMC_PCR_DIV4 0x2 /* Peripheral clock is MCK/4 */ +#define AT91_PMC_PCR_DIV8 0x3 /* Peripheral clock is MCK/8 */ #define AT91_PMC_PCR_EN (0x1 << 28) /* Enable */ #endif -- cgit v1.2.3 From 726dcaa158b316f02f7dec2cf6dbf61c30a8bf22 Mon Sep 17 00:00:00 2001 From: Chen Gang Date: Mon, 20 May 2013 08:12:57 +0100 Subject: arm64: kernel: compiling issue, need 'EXPORT_SYMBOL(clear_page)' Need 'EXPORT_SYMBOL(clear_page)' if building with allmodconfig. The related errors: ERROR: "clear_page" [fs/ocfs2/dlm/ocfs2_dlm.ko] undefined! ERROR: "clear_page" [fs/ntfs/ntfs.ko] undefined! ERROR: "clear_page" [fs/gfs2/gfs2.ko] undefined! ERROR: "clear_page" [fs/fuse/fuse.ko] undefined! ERROR: "clear_page" [fs/ext3/ext3.ko] undefined! ERROR: "clear_page" [fs/ext2/ext2.ko] undefined! ERROR: "clear_page" [fs/exofs/libore.ko] undefined! ERROR: "clear_page" [fs/exofs/exofs.ko] undefined! ERROR: "clear_page" [drivers/block/brd.ko] undefined! Signed-off-by: Chen Gang Signed-off-by: Catalin Marinas --- arch/arm64/kernel/arm64ksyms.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm64/kernel/arm64ksyms.c b/arch/arm64/kernel/arm64ksyms.c index 7df1aad29b67..41b4f626d554 100644 --- a/arch/arm64/kernel/arm64ksyms.c +++ b/arch/arm64/kernel/arm64ksyms.c @@ -34,6 +34,7 @@ EXPORT_SYMBOL(__strnlen_user); EXPORT_SYMBOL(__strncpy_from_user); EXPORT_SYMBOL(copy_page); +EXPORT_SYMBOL(clear_page); EXPORT_SYMBOL(__copy_from_user); EXPORT_SYMBOL(__copy_to_user); -- cgit v1.2.3 From 953dbbed9ee310100bc841cdea8f992d192531c6 Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Tue, 21 May 2013 12:16:56 +0100 Subject: arm64: Do not report user faults for handled signals Currently user faults (page, undefined instruction) are always reported even though the user may have a signal handler for them. This patch adds unhandled_signal() check together with printk_ratelimit() for these cases. Signed-off-by: Catalin Marinas --- arch/arm64/kernel/traps.c | 5 +++-- arch/arm64/mm/fault.c | 3 ++- 2 files changed, 5 insertions(+), 3 deletions(-) diff --git a/arch/arm64/kernel/traps.c b/arch/arm64/kernel/traps.c index 61d7dd29f756..f1ff9bad00f7 100644 --- a/arch/arm64/kernel/traps.c +++ b/arch/arm64/kernel/traps.c @@ -267,7 +267,8 @@ asmlinkage void __exception do_undefinstr(struct pt_regs *regs) return; #endif - if (show_unhandled_signals) { + if (show_unhandled_signals && unhandled_signal(current, SIGILL) && + printk_ratelimit()) { pr_info("%s[%d]: undefined instruction: pc=%p\n", current->comm, task_pid_nr(current), pc); dump_instr(KERN_INFO, regs); @@ -294,7 +295,7 @@ asmlinkage long do_ni_syscall(struct pt_regs *regs) } #endif - if (show_unhandled_signals) { + if (show_unhandled_signals && printk_ratelimit()) { pr_info("%s[%d]: syscall %d\n", current->comm, task_pid_nr(current), (int)regs->syscallno); dump_instr("", regs); diff --git a/arch/arm64/mm/fault.c b/arch/arm64/mm/fault.c index 98af6e760cce..1426468b77f3 100644 --- a/arch/arm64/mm/fault.c +++ b/arch/arm64/mm/fault.c @@ -113,7 +113,8 @@ static void __do_user_fault(struct task_struct *tsk, unsigned long addr, { struct siginfo si; - if (show_unhandled_signals) { + if (show_unhandled_signals && unhandled_signal(tsk, sig) && + printk_ratelimit()) { pr_info("%s[%d]: unhandled %s (%d) at 0x%08lx, esr 0x%03x\n", tsk->comm, task_pid_nr(tsk), fault_name(esr), sig, addr, esr); -- cgit v1.2.3 From 23dd9b2a43698df12f7951e0e5a5fbffd0b3108a Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Thu, 23 May 2013 12:20:54 +0200 Subject: ath9k_hw: fix spur mitigation issues on AR934x Do not subtract spur power from noise floor on this chip, as it can lead to packet loss and other connectivity issues. Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/ar9003_phy.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/ath/ath9k/ar9003_phy.c b/drivers/net/wireless/ath/ath9k/ar9003_phy.c index 2bf6548dd143..e1714d7c9eeb 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_phy.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.c @@ -334,7 +334,8 @@ static void ar9003_hw_spur_ofdm(struct ath_hw *ah, REG_RMW_FIELD(ah, AR_PHY_SPUR_REG, AR_PHY_SPUR_REG_EN_VIT_SPUR_RSSI, 1); - if (REG_READ_FIELD(ah, AR_PHY_MODE, + if (!AR_SREV_9340(ah) && + REG_READ_FIELD(ah, AR_PHY_MODE, AR_PHY_MODE_DYNAMIC) == 0x1) REG_RMW_FIELD(ah, AR_PHY_SPUR_REG, AR_PHY_SPUR_REG_ENABLE_NF_RSSI_SPUR_MIT, 1); -- cgit v1.2.3 From a37a99102e4573145aa60a2f78a690cc8def027c Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Thu, 23 May 2013 12:20:55 +0200 Subject: ath9k_hw: fix host interface reset on AR934x If a local bus timeout has been detected, the host interface needs to be reset to clear the errors. AR934x uses a different synchronous interrupt bit to indicate this, so the check needs to be fixed. Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/hw.c | 10 +++++++--- drivers/net/wireless/ath/ath9k/reg.h | 2 ++ 2 files changed, 9 insertions(+), 3 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c index 7f25da8444fe..01e97ce438ba 100644 --- a/drivers/net/wireless/ath/ath9k/hw.c +++ b/drivers/net/wireless/ath/ath9k/hw.c @@ -1306,9 +1306,13 @@ static bool ath9k_hw_set_reset(struct ath_hw *ah, int type) AR_RTC_RC_COLD_RESET | AR_RTC_RC_WARM_RESET; } else { tmpReg = REG_READ(ah, AR_INTR_SYNC_CAUSE); - if (tmpReg & - (AR_INTR_SYNC_LOCAL_TIMEOUT | - AR_INTR_SYNC_RADM_CPL_TIMEOUT)) { + if (AR_SREV_9340(ah)) + tmpReg &= AR9340_INTR_SYNC_LOCAL_TIMEOUT; + else + tmpReg &= AR_INTR_SYNC_LOCAL_TIMEOUT | + AR_INTR_SYNC_RADM_CPL_TIMEOUT; + + if (tmpReg) { u32 val; REG_WRITE(ah, AR_INTR_SYNC_ENABLE, 0); diff --git a/drivers/net/wireless/ath/ath9k/reg.h b/drivers/net/wireless/ath/ath9k/reg.h index 5c4ab5026dca..9c056a80b85d 100644 --- a/drivers/net/wireless/ath/ath9k/reg.h +++ b/drivers/net/wireless/ath/ath9k/reg.h @@ -1007,6 +1007,8 @@ enum { AR_INTR_SYNC_LOCAL_TIMEOUT | AR_INTR_SYNC_MAC_SLEEP_ACCESS), + AR9340_INTR_SYNC_LOCAL_TIMEOUT = 0x00000010, + AR_INTR_SYNC_SPURIOUS = 0xFFFFFFFF, }; -- cgit v1.2.3 From 86c157b3f83597e11d8f03a9dece98d1e77a8ce7 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Thu, 23 May 2013 12:20:56 +0200 Subject: ath9k_hw: improve performance for AR934x v1.3+ AR934x v1.3 no longer needs the DCU backoff reduction workaround for preventing rx overruns, but in turn needs the number of usable Tx buffers to be reduced slightly. Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/hw.c | 15 ++++++++++----- drivers/net/wireless/ath/ath9k/mac.c | 2 +- drivers/net/wireless/ath/ath9k/reg.h | 9 +++++++++ 3 files changed, 20 insertions(+), 6 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c index 01e97ce438ba..15dfefcf2d0f 100644 --- a/drivers/net/wireless/ath/ath9k/hw.c +++ b/drivers/net/wireless/ath/ath9k/hw.c @@ -1172,6 +1172,7 @@ u32 ath9k_regd_get_ctl(struct ath_regulatory *reg, struct ath9k_channel *chan) static inline void ath9k_hw_set_dma(struct ath_hw *ah) { struct ath_common *common = ath9k_hw_common(ah); + int txbuf_size; ENABLE_REGWRITE_BUFFER(ah); @@ -1225,13 +1226,17 @@ static inline void ath9k_hw_set_dma(struct ath_hw *ah) * So set the usable tx buf size also to half to * avoid data/delimiter underruns */ - REG_WRITE(ah, AR_PCU_TXBUF_CTRL, - AR_9285_PCU_TXBUF_CTRL_USABLE_SIZE); - } else if (!AR_SREV_9271(ah)) { - REG_WRITE(ah, AR_PCU_TXBUF_CTRL, - AR_PCU_TXBUF_CTRL_USABLE_SIZE); + txbuf_size = AR_9285_PCU_TXBUF_CTRL_USABLE_SIZE; + } else if (AR_SREV_9340_13_OR_LATER(ah)) { + /* Uses fewer entries for AR934x v1.3+ to prevent rx overruns */ + txbuf_size = AR_9340_PCU_TXBUF_CTRL_USABLE_SIZE; + } else { + txbuf_size = AR_PCU_TXBUF_CTRL_USABLE_SIZE; } + if (!AR_SREV_9271(ah)) + REG_WRITE(ah, AR_PCU_TXBUF_CTRL, txbuf_size); + REGWRITE_BUFFER_FLUSH(ah); if (AR_SREV_9300_20_OR_LATER(ah)) diff --git a/drivers/net/wireless/ath/ath9k/mac.c b/drivers/net/wireless/ath/ath9k/mac.c index 498fee04afa0..566109a40fb3 100644 --- a/drivers/net/wireless/ath/ath9k/mac.c +++ b/drivers/net/wireless/ath/ath9k/mac.c @@ -410,7 +410,7 @@ bool ath9k_hw_resettxqueue(struct ath_hw *ah, u32 q) REG_WRITE(ah, AR_QMISC(q), AR_Q_MISC_DCU_EARLY_TERM_REQ); - if (AR_SREV_9340(ah)) + if (AR_SREV_9340(ah) && !AR_SREV_9340_13_OR_LATER(ah)) REG_WRITE(ah, AR_DMISC(q), AR_D_MISC_CW_BKOFF_EN | AR_D_MISC_FRAG_WAIT_EN | 0x1); else diff --git a/drivers/net/wireless/ath/ath9k/reg.h b/drivers/net/wireless/ath/ath9k/reg.h index 9c056a80b85d..f7c90cc58d56 100644 --- a/drivers/net/wireless/ath/ath9k/reg.h +++ b/drivers/net/wireless/ath/ath9k/reg.h @@ -798,6 +798,10 @@ #define AR_SREV_REVISION_9485_10 0 #define AR_SREV_REVISION_9485_11 1 #define AR_SREV_VERSION_9340 0x300 +#define AR_SREV_REVISION_9340_10 0 +#define AR_SREV_REVISION_9340_11 1 +#define AR_SREV_REVISION_9340_12 2 +#define AR_SREV_REVISION_9340_13 3 #define AR_SREV_VERSION_9580 0x1C0 #define AR_SREV_REVISION_9580_10 4 /* AR9580 1.0 */ #define AR_SREV_VERSION_9462 0x280 @@ -897,6 +901,10 @@ #define AR_SREV_9340(_ah) \ (((_ah)->hw_version.macVersion == AR_SREV_VERSION_9340)) +#define AR_SREV_9340_13_OR_LATER(_ah) \ + (AR_SREV_9340((_ah)) && \ + ((_ah)->hw_version.macRev >= AR_SREV_REVISION_9340_13)) + #define AR_SREV_9285E_20(_ah) \ (AR_SREV_9285_12_OR_LATER(_ah) && \ ((REG_READ(_ah, AR_AN_SYNTH9) & 0x7) == 0x1)) @@ -1883,6 +1891,7 @@ enum { #define AR_PCU_TXBUF_CTRL_SIZE_MASK 0x7FF #define AR_PCU_TXBUF_CTRL_USABLE_SIZE 0x700 #define AR_9285_PCU_TXBUF_CTRL_USABLE_SIZE 0x380 +#define AR_9340_PCU_TXBUF_CTRL_USABLE_SIZE 0x500 #define AR_PCU_MISC_MODE2 0x8344 #define AR_PCU_MISC_MODE2_MGMT_CRYPTO_ENABLE 0x00000002 -- cgit v1.2.3 From 62106e96279f66c52e2123782f9420af9dbe8cbe Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Tue, 7 May 2013 11:28:31 -0400 Subject: cifs: only set ops for inodes in I_NEW state It's generally not safe to reset the inode ops once they've been set. In the case where the inode was originally thought to be a directory and then later found to be a DFS referral, this can lead to an oops when we try to trigger an inode op on it after changing the ops to the blank referral operations. Cc: Reported-and-Tested-by: Sachin Prabhu Signed-off-by: Jeff Layton Signed-off-by: Steve French Signed-off-by: Steve French --- fs/cifs/inode.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/fs/cifs/inode.c b/fs/cifs/inode.c index fc3025199cb3..20efd81266c6 100644 --- a/fs/cifs/inode.c +++ b/fs/cifs/inode.c @@ -171,7 +171,8 @@ cifs_fattr_to_inode(struct inode *inode, struct cifs_fattr *fattr) if (fattr->cf_flags & CIFS_FATTR_DFS_REFERRAL) inode->i_flags |= S_AUTOMOUNT; - cifs_set_ops(inode); + if (inode->i_state & I_NEW) + cifs_set_ops(inode); } void -- cgit v1.2.3 From 166faf21bd14bc5c5295a44874bf7f3930c30b20 Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Fri, 24 May 2013 07:40:04 -0400 Subject: cifs: fix potential buffer overrun when composing a new options string Consider the case where we have a very short ip= string in the original mount options, and when we chase a referral we end up with a very long IPv6 address. Be sure to allow for that possibility when estimating the size of the string to allocate. Cc: Signed-off-by: Jeff Layton Signed-off-by: Steve French --- fs/cifs/cifs_dfs_ref.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/fs/cifs/cifs_dfs_ref.c b/fs/cifs/cifs_dfs_ref.c index 8e33ec65847b..8e5a1817496d 100644 --- a/fs/cifs/cifs_dfs_ref.c +++ b/fs/cifs/cifs_dfs_ref.c @@ -18,6 +18,7 @@ #include #include #include +#include #include "cifsglob.h" #include "cifsproto.h" #include "cifsfs.h" @@ -150,7 +151,8 @@ char *cifs_compose_mount_options(const char *sb_mountdata, * assuming that we have 'unc=' and 'ip=' in * the original sb_mountdata */ - md_len = strlen(sb_mountdata) + rc + strlen(ref->node_name) + 12; + md_len = strlen(sb_mountdata) + rc + strlen(ref->node_name) + 12 + + INET6_ADDRSTRLEN; mountdata = kzalloc(md_len+1, GFP_KERNEL); if (mountdata == NULL) { rc = -ENOMEM; -- cgit v1.2.3 From 539673fff76af73c3aee96e0de10edcc97d84db3 Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Fri, 24 May 2013 07:40:04 -0400 Subject: cifs: allow sec=none mounts to work against servers that don't support extended security In the case of sec=none, we're not sending a username or password, so there's little benefit to mandating NTLMSSP auth. Allow it to use unencapsulated auth in that case. Signed-off-by: Jeff Layton Signed-off-by: Steve French --- fs/cifs/connect.c | 1 + 1 file changed, 1 insertion(+) diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c index 99eeaa17ee00..0a7fdc31f253 100644 --- a/fs/cifs/connect.c +++ b/fs/cifs/connect.c @@ -1061,6 +1061,7 @@ static int cifs_parse_security_flavors(char *value, #endif case Opt_sec_none: vol->nullauth = 1; + vol->secFlg |= CIFSSEC_MAY_NTLM; break; default: cifs_dbg(VFS, "bad security option: %s\n", value); -- cgit v1.2.3 From 37d4f99b55d46d9f71f4769faf74c95adb2c1daf Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Fri, 24 May 2013 07:40:05 -0400 Subject: cifs: fix error handling when calling cifs_parse_devname When we allowed separate unc= and prefixpath= mount options, we could ignore EINVAL errors from cifs_parse_devname. Now that they are deprecated, we need to check for that as well and fail the mount if it's malformed. Also fix a later error message that refers to the unc= option. Signed-off-by: Jeff Layton Signed-off-by: Steve French --- fs/cifs/connect.c | 22 +++++++++++++--------- 1 file changed, 13 insertions(+), 9 deletions(-) diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c index 0a7fdc31f253..5b97e56ddbca 100644 --- a/fs/cifs/connect.c +++ b/fs/cifs/connect.c @@ -1258,14 +1258,18 @@ cifs_parse_mount_options(const char *mountdata, const char *devname, vol->backupuid_specified = false; /* no backup intent for a user */ vol->backupgid_specified = false; /* no backup intent for a group */ - /* - * For now, we ignore -EINVAL errors under the assumption that the - * unc= and prefixpath= options will be usable. - */ - if (cifs_parse_devname(devname, vol) == -ENOMEM) { - printk(KERN_ERR "CIFS: Unable to allocate memory to parse " - "device string.\n"); - goto out_nomem; + switch (cifs_parse_devname(devname, vol)) { + case 0: + break; + case -ENOMEM: + cifs_dbg(VFS, "Unable to allocate memory for devname.\n"); + goto cifs_parse_mount_err; + case -EINVAL: + cifs_dbg(VFS, "Malformed UNC in devname.\n"); + goto cifs_parse_mount_err; + default: + cifs_dbg(VFS, "Unknown error parsing devname.\n"); + goto cifs_parse_mount_err; } while ((data = strsep(&options, separator)) != NULL) { @@ -1827,7 +1831,7 @@ cifs_parse_mount_options(const char *mountdata, const char *devname, } #endif if (!vol->UNC) { - cifs_dbg(VFS, "CIFS mount error: No usable UNC path provided in device string or in unc= option!\n"); + cifs_dbg(VFS, "CIFS mount error: No usable UNC path provided in device string!\n"); goto cifs_parse_mount_err; } -- cgit v1.2.3 From 9c9c29e1af2ff0459087876e3800078555794b60 Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Fri, 24 May 2013 07:40:05 -0400 Subject: cifs: stop printing the unc= option in /proc/mounts Since we no longer recognize that option, stop printing it out. The devicename is now the canonical source for this info. Signed-off-by: Jeff Layton Signed-off-by: Steve French --- fs/cifs/cifsfs.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/fs/cifs/cifsfs.c b/fs/cifs/cifsfs.c index 72e4efee1389..3752b9f6d9e4 100644 --- a/fs/cifs/cifsfs.c +++ b/fs/cifs/cifsfs.c @@ -372,9 +372,6 @@ cifs_show_options(struct seq_file *s, struct dentry *root) cifs_show_security(s, tcon->ses->server); cifs_show_cache_flavor(s, cifs_sb); - seq_printf(s, ",unc="); - seq_escape(s, tcon->treeName, " \t\n\\"); - if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MULTIUSER) seq_printf(s, ",multiuser"); else if (tcon->ses->user_name) -- cgit v1.2.3 From d9deef0a3f38bcc1c155e8d9a8b522404e5e648c Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Fri, 24 May 2013 07:40:06 -0400 Subject: cifs: fix composing of mount options for DFS referrals With the change to ignore the unc= and prefixpath= mount options, there is no longer any need to add them to the options string when mounting. By the same token, we now need to build a device name that includes the prefixpath when mounting. To make things neater, the delimiters on the devicename are changed to '/' since that's preferred when mounting anyway. v2: fix some comments and don't bother looking at whether there is a prepath in the ref->node_name when deciding whether to pass a prepath to cifs_build_devname. v3: rebase on top of potential buffer overrun fix for stable Signed-off-by: Jeff Layton Signed-off-by: Steve French --- fs/cifs/cifs_dfs_ref.c | 141 +++++++++++++++++++++++++------------------------ fs/cifs/dns_resolve.c | 4 +- 2 files changed, 73 insertions(+), 72 deletions(-) diff --git a/fs/cifs/cifs_dfs_ref.c b/fs/cifs/cifs_dfs_ref.c index 8e5a1817496d..58df174deb10 100644 --- a/fs/cifs/cifs_dfs_ref.c +++ b/fs/cifs/cifs_dfs_ref.c @@ -49,58 +49,74 @@ void cifs_dfs_release_automount_timer(void) } /** - * cifs_get_share_name - extracts share name from UNC - * @node_name: pointer to UNC string + * cifs_build_devname - build a devicename from a UNC and optional prepath + * @nodename: pointer to UNC string + * @prepath: pointer to prefixpath (or NULL if there isn't one) * - * Extracts sharename form full UNC. - * i.e. strips from UNC trailing path that is not part of share - * name and fixup missing '\' in the beginning of DFS node refferal - * if necessary. - * Returns pointer to share name on success or ERR_PTR on error. - * Caller is responsible for freeing returned string. + * Build a new cifs devicename after chasing a DFS referral. Allocate a buffer + * big enough to hold the final thing. Copy the UNC from the nodename, and + * concatenate the prepath onto the end of it if there is one. + * + * Returns pointer to the built string, or a ERR_PTR. Caller is responsible + * for freeing the returned string. */ -static char *cifs_get_share_name(const char *node_name) +static char * +cifs_build_devname(char *nodename, const char *prepath) { - int len; - char *UNC; - char *pSep; - - len = strlen(node_name); - UNC = kmalloc(len+2 /*for term null and additional \ if it's missed */, - GFP_KERNEL); - if (!UNC) - return ERR_PTR(-ENOMEM); + size_t pplen; + size_t unclen; + char *dev; + char *pos; + + /* skip over any preceding delimiters */ + nodename += strspn(nodename, "\\"); + if (!*nodename) + return ERR_PTR(-EINVAL); - /* get share name and server name */ - if (node_name[1] != '\\') { - UNC[0] = '\\'; - strncpy(UNC+1, node_name, len); - len++; - UNC[len] = 0; - } else { - strncpy(UNC, node_name, len); - UNC[len] = 0; - } + /* get length of UNC and set pos to last char */ + unclen = strlen(nodename); + pos = nodename + unclen - 1; - /* find server name end */ - pSep = memchr(UNC+2, '\\', len-2); - if (!pSep) { - cifs_dbg(VFS, "%s: no server name end in node name: %s\n", - __func__, node_name); - kfree(UNC); - return ERR_PTR(-EINVAL); + /* trim off any trailing delimiters */ + while (*pos == '\\') { + --pos; + --unclen; } - /* find sharename end */ - pSep++; - pSep = memchr(UNC+(pSep-UNC), '\\', len-(pSep-UNC)); - if (pSep) { - /* trim path up to sharename end - * now we have share name in UNC */ - *pSep = 0; + /* allocate a buffer: + * +2 for preceding "//" + * +1 for delimiter between UNC and prepath + * +1 for trailing NULL + */ + pplen = prepath ? strlen(prepath) : 0; + dev = kmalloc(2 + unclen + 1 + pplen + 1, GFP_KERNEL); + if (!dev) + return ERR_PTR(-ENOMEM); + + pos = dev; + /* add the initial "//" */ + *pos = '/'; + ++pos; + *pos = '/'; + ++pos; + + /* copy in the UNC portion from referral */ + memcpy(pos, nodename, unclen); + pos += unclen; + + /* copy the prefixpath remainder (if there is one) */ + if (pplen) { + *pos = '/'; + ++pos; + memcpy(pos, prepath, pplen); + pos += pplen; } - return UNC; + /* NULL terminator */ + *pos = '\0'; + + convert_delimiter(dev, '/'); + return dev; } @@ -124,6 +140,7 @@ char *cifs_compose_mount_options(const char *sb_mountdata, { int rc; char *mountdata = NULL; + const char *prepath = NULL; int md_len; char *tkn_e; char *srvIP = NULL; @@ -133,7 +150,10 @@ char *cifs_compose_mount_options(const char *sb_mountdata, if (sb_mountdata == NULL) return ERR_PTR(-EINVAL); - *devname = cifs_get_share_name(ref->node_name); + if (strlen(fullpath) - ref->path_consumed) + prepath = fullpath + ref->path_consumed; + + *devname = cifs_build_devname(ref->node_name, prepath); if (IS_ERR(*devname)) { rc = PTR_ERR(*devname); *devname = NULL; @@ -147,13 +167,14 @@ char *cifs_compose_mount_options(const char *sb_mountdata, goto compose_mount_options_err; } - /* md_len = strlen(...) + 12 for 'sep+prefixpath=' - * assuming that we have 'unc=' and 'ip=' in - * the original sb_mountdata + /* + * In most cases, we'll be building a shorter string than the original, + * but we do have to assume that the address in the ip= option may be + * much longer than the original. Add the max length of an address + * string to the length of the original string to allow for worst case. */ - md_len = strlen(sb_mountdata) + rc + strlen(ref->node_name) + 12 + - INET6_ADDRSTRLEN; - mountdata = kzalloc(md_len+1, GFP_KERNEL); + md_len = strlen(sb_mountdata) + INET6_ADDRSTRLEN; + mountdata = kzalloc(md_len + 1, GFP_KERNEL); if (mountdata == NULL) { rc = -ENOMEM; goto compose_mount_options_err; @@ -197,26 +218,6 @@ char *cifs_compose_mount_options(const char *sb_mountdata, strncat(mountdata, &sep, 1); strcat(mountdata, "ip="); strcat(mountdata, srvIP); - strncat(mountdata, &sep, 1); - strcat(mountdata, "unc="); - strcat(mountdata, *devname); - - /* find & copy prefixpath */ - tkn_e = strchr(ref->node_name + 2, '\\'); - if (tkn_e == NULL) { - /* invalid unc, missing share name*/ - rc = -EINVAL; - goto compose_mount_options_err; - } - - tkn_e = strchr(tkn_e + 1, '\\'); - if (tkn_e || (strlen(fullpath) - ref->path_consumed)) { - strncat(mountdata, &sep, 1); - strcat(mountdata, "prefixpath="); - if (tkn_e) - strcat(mountdata, tkn_e + 1); - strcat(mountdata, fullpath + ref->path_consumed); - } /*cifs_dbg(FYI, "%s: parent mountdata: %s\n", __func__, sb_mountdata);*/ /*cifs_dbg(FYI, "%s: submount mountdata: %s\n", __func__, mountdata );*/ diff --git a/fs/cifs/dns_resolve.c b/fs/cifs/dns_resolve.c index e7512e497611..7ede7306599f 100644 --- a/fs/cifs/dns_resolve.c +++ b/fs/cifs/dns_resolve.c @@ -34,7 +34,7 @@ /** * dns_resolve_server_name_to_ip - Resolve UNC server name to ip address. - * @unc: UNC path specifying the server + * @unc: UNC path specifying the server (with '/' as delimiter) * @ip_addr: Where to return the IP address. * * The IP address will be returned in string form, and the caller is @@ -64,7 +64,7 @@ dns_resolve_server_name_to_ip(const char *unc, char **ip_addr) hostname = unc + 2; /* Search for server name delimiter */ - sep = memchr(hostname, '\\', len); + sep = memchr(hostname, '/', len); if (sep) len = sep - hostname; else -- cgit v1.2.3 From 70ef5578dd8011eeafa999a18194d9b548a4d889 Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Sun, 5 May 2013 22:08:22 +0000 Subject: MPILIB: disable usage of floating point registers on parisc The umul_ppmm() macro for parisc uses the xmpyu assembler statement which does calculation via a floating point register. But usage of floating point registers inside the Linux kernel are not allowed and gcc will stop compilation due to the -mdisable-fpregs compiler option. Fix this by disabling the umul_ppmm() and udiv_qrnnd() macros. The mpilib will then use the generic built-in implementations instead. Signed-off-by: Helge Deller --- lib/mpi/longlong.h | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/lib/mpi/longlong.h b/lib/mpi/longlong.h index 095ab157a521..d411355f238e 100644 --- a/lib/mpi/longlong.h +++ b/lib/mpi/longlong.h @@ -318,7 +318,8 @@ extern UDItype __udiv_qrnnd(); "rM" ((USItype)(bh)), \ "rM" ((USItype)(al)), \ "rM" ((USItype)(bl))) -#if defined(_PA_RISC1_1) +#if 0 && defined(_PA_RISC1_1) +/* xmpyu uses floating point register which is not allowed in Linux kernel. */ #define umul_ppmm(wh, wl, u, v) \ do { \ union {UDItype __ll; \ @@ -337,7 +338,7 @@ do { \ #define UMUL_TIME 40 #define UDIV_TIME 80 #endif -#ifndef LONGLONG_STANDALONE +#if 0 /* #ifndef LONGLONG_STANDALONE */ #define udiv_qrnnd(q, r, n1, n0, d) \ do { USItype __r; \ (q) = __udiv_qrnnd(&__r, (n1), (n0), (d)); \ -- cgit v1.2.3 From 949451b9b19da5e998778eb78929aafc73b5c227 Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Thu, 16 May 2013 20:42:39 +0000 Subject: parisc: add rp5470 entry to machine database Signed-off-by: Helge Deller --- arch/parisc/kernel/hardware.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/parisc/kernel/hardware.c b/arch/parisc/kernel/hardware.c index f7752f6af29e..9e2d2e408529 100644 --- a/arch/parisc/kernel/hardware.c +++ b/arch/parisc/kernel/hardware.c @@ -222,6 +222,7 @@ static struct hp_hardware hp_hardware_list[] = { {HPHW_NPROC,0x5DD,0x4,0x81,"Duet W2"}, {HPHW_NPROC,0x5DE,0x4,0x81,"Piccolo W+"}, {HPHW_NPROC,0x5DF,0x4,0x81,"Cantata W2"}, + {HPHW_NPROC,0x5DF,0x0,0x00,"Marcato W+? (rp5470)"}, {HPHW_NPROC,0x5E0,0x4,0x91,"Cantata DC- W2"}, {HPHW_NPROC,0x5E1,0x4,0x91,"Crescendo DC- W2"}, {HPHW_NPROC,0x5E2,0x4,0x91,"Crescendo 650 W2"}, -- cgit v1.2.3 From d845b5fb36edbd16563bde49ae1217b3f5132eec Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Thu, 16 May 2013 20:51:41 +0000 Subject: parisc: use PAGE_SHIFT instead of hardcoded value 12 in pacache.S additionally clean up some whitespaces & tabs. Signed-off-by: Helge Deller --- arch/parisc/kernel/pacache.S | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/arch/parisc/kernel/pacache.S b/arch/parisc/kernel/pacache.S index 5e1de6072be5..36d7f402e48e 100644 --- a/arch/parisc/kernel/pacache.S +++ b/arch/parisc/kernel/pacache.S @@ -605,14 +605,14 @@ ENTRY(copy_user_page_asm) convert_phys_for_tlb_insert20 %r26 /* convert phys addr to tlb insert format */ convert_phys_for_tlb_insert20 %r23 /* convert phys addr to tlb insert format */ depd %r24,63,22, %r28 /* Form aliased virtual address 'to' */ - depdi 0, 63,PAGE_SHIFT, %r28 /* Clear any offset bits */ + depdi 0, 63,PAGE_SHIFT, %r28 /* Clear any offset bits */ copy %r28, %r29 depdi 1, 41,1, %r29 /* Form aliased virtual address 'from' */ #else extrw,u %r26, 24,25, %r26 /* convert phys addr to tlb insert format */ extrw,u %r23, 24,25, %r23 /* convert phys addr to tlb insert format */ depw %r24, 31,22, %r28 /* Form aliased virtual address 'to' */ - depwi 0, 31,12, %r28 /* Clear any offset bits */ + depwi 0, 31,PAGE_SHIFT, %r28 /* Clear any offset bits */ copy %r28, %r29 depwi 1, 9,1, %r29 /* Form aliased virtual address 'from' */ #endif @@ -762,7 +762,7 @@ ENTRY(clear_user_page_asm) #else extrw,u %r26, 24,25, %r26 /* convert phys addr to tlb insert format */ depw %r25, 31,22, %r28 /* Form aliased virtual address 'to' */ - depwi 0, 31,12, %r28 /* Clear any offset bits */ + depwi 0, 31,PAGE_SHIFT, %r28 /* Clear any offset bits */ #endif /* Purge any old translation */ @@ -846,7 +846,7 @@ ENTRY(flush_dcache_page_asm) #else extrw,u %r26, 24,25, %r26 /* convert phys addr to tlb insert format */ depw %r25, 31,22, %r28 /* Form aliased virtual address 'to' */ - depwi 0, 31,12, %r28 /* Clear any offset bits */ + depwi 0, 31,PAGE_SHIFT, %r28 /* Clear any offset bits */ #endif /* Purge any old translation */ @@ -918,11 +918,11 @@ ENTRY(flush_icache_page_asm) #endif convert_phys_for_tlb_insert20 %r26 /* convert phys addr to tlb insert format */ depd %r25, 63,22, %r28 /* Form aliased virtual address 'to' */ - depdi 0, 63,PAGE_SHIFT, %r28 /* Clear any offset bits */ + depdi 0, 63,PAGE_SHIFT, %r28 /* Clear any offset bits */ #else extrw,u %r26, 24,25, %r26 /* convert phys addr to tlb insert format */ depw %r25, 31,22, %r28 /* Form aliased virtual address 'to' */ - depwi 0, 31,12, %r28 /* Clear any offset bits */ + depwi 0, 31,PAGE_SHIFT, %r28 /* Clear any offset bits */ #endif /* Purge any old translation */ -- cgit v1.2.3 From fbb46caa1bd2d99079a24f8a6ae0b33655e42fae Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Thu, 16 May 2013 21:00:16 +0000 Subject: parisc: add additional parisc git tree to MAINTAINERS file Signed-off-by: Helge Deller --- MAINTAINERS | 1 + 1 file changed, 1 insertion(+) diff --git a/MAINTAINERS b/MAINTAINERS index b645a3d5fd30..fd3a495a0005 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -6084,6 +6084,7 @@ L: linux-parisc@vger.kernel.org W: http://www.parisc-linux.org/ Q: http://patchwork.kernel.org/project/linux-parisc/list/ T: git git://git.kernel.org/pub/scm/linux/kernel/git/jejb/parisc-2.6.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux.git S: Maintained F: arch/parisc/ F: drivers/parisc/ -- cgit v1.2.3 From d0c3be806a3fe7f4abdb0f7e7287addb55e73f35 Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Sat, 18 May 2013 19:35:44 +0000 Subject: parisc: show number of FPE and unaligned access handler calls in /proc/interrupts Show number of floating point assistant and unaligned access fixup handler in /proc/interrupts file. Signed-off-by: Helge Deller --- arch/parisc/include/asm/hardirq.h | 2 ++ arch/parisc/kernel/irq.c | 8 ++++++++ arch/parisc/kernel/traps.c | 1 + arch/parisc/kernel/unaligned.c | 3 +++ 4 files changed, 14 insertions(+) diff --git a/arch/parisc/include/asm/hardirq.h b/arch/parisc/include/asm/hardirq.h index c19f7138ba48..4c6dd8da1e5d 100644 --- a/arch/parisc/include/asm/hardirq.h +++ b/arch/parisc/include/asm/hardirq.h @@ -28,6 +28,8 @@ typedef struct { unsigned int irq_resched_count; unsigned int irq_call_count; #endif + unsigned int irq_unaligned_count; + unsigned int irq_fpassist_count; unsigned int irq_tlb_count; } ____cacheline_aligned irq_cpustat_t; diff --git a/arch/parisc/kernel/irq.c b/arch/parisc/kernel/irq.c index 55237a70e197..9c2d953f3de5 100644 --- a/arch/parisc/kernel/irq.c +++ b/arch/parisc/kernel/irq.c @@ -188,6 +188,14 @@ int arch_show_interrupts(struct seq_file *p, int prec) seq_printf(p, "%10u ", irq_stats(j)->irq_call_count); seq_puts(p, " Function call interrupts\n"); #endif + seq_printf(p, "%*s: ", prec, "UAH"); + for_each_online_cpu(j) + seq_printf(p, "%10u ", irq_stats(j)->irq_unaligned_count); + seq_puts(p, " Unaligned access handler traps\n"); + seq_printf(p, "%*s: ", prec, "FPA"); + for_each_online_cpu(j) + seq_printf(p, "%10u ", irq_stats(j)->irq_fpassist_count); + seq_puts(p, " Floating point assist traps\n"); seq_printf(p, "%*s: ", prec, "TLB"); for_each_online_cpu(j) seq_printf(p, "%10u ", irq_stats(j)->irq_tlb_count); diff --git a/arch/parisc/kernel/traps.c b/arch/parisc/kernel/traps.c index fe41a98043bb..04e47c6a4562 100644 --- a/arch/parisc/kernel/traps.c +++ b/arch/parisc/kernel/traps.c @@ -646,6 +646,7 @@ void notrace handle_interruption(int code, struct pt_regs *regs) case 14: /* Assist Exception Trap, i.e. floating point exception. */ die_if_kernel("Floating point exception", regs, 0); /* quiet */ + __inc_irq_stat(irq_fpassist_count); handle_fpe(regs); return; diff --git a/arch/parisc/kernel/unaligned.c b/arch/parisc/kernel/unaligned.c index 234e3682cf09..d7c0acb35ec2 100644 --- a/arch/parisc/kernel/unaligned.c +++ b/arch/parisc/kernel/unaligned.c @@ -27,6 +27,7 @@ #include #include #include +#include /* #define DEBUG_UNALIGNED 1 */ @@ -454,6 +455,8 @@ void handle_unaligned(struct pt_regs *regs) struct siginfo si; register int flop=0; /* true if this is a flop */ + __inc_irq_stat(irq_unaligned_count); + /* log a message with pacing */ if (user_mode(regs)) { if (current->thread.flags & PARISC_UAC_SIGBUS) { -- cgit v1.2.3 From b63a2bbc0b9b106a93e11952ab057e2408f2eb02 Mon Sep 17 00:00:00 2001 From: John David Anglin Date: Mon, 20 May 2013 16:42:53 +0000 Subject: parisc: make interrupt and interruption stack allocation reentrant The get_stack_use_cr30 and get_stack_use_r30 macros allocate a stack frame for external interrupts and interruptions requiring a stack frame. They are currently not reentrant in that they save register context before the stack is set or adjusted. I have observed a number of system crashes where there was clear evidence of stack corruption during interrupt processing, and as a result register corruption. Some interruptions can still occur during interruption processing, however external interrupts are disabled and data TLB misses don't occur for absolute accesses. So, it's not entirely clear what triggers this issue. Also, if an interruption occurs when Q=0, it is generally not possible to recover as the shadowed registers are not copied. The attached patch reworks the get_stack_use_cr30 and get_stack_use_r30 macros to allocate stack before doing register saves. The new code is a couple of instructions shorter than the old implementation. Thus, it's an improvement even if it doesn't fully resolve the stack corruption issue. Based on limited testing, it improves SMP system stability. Signed-off-by: John David Anglin Signed-off-by: Helge Deller --- arch/parisc/include/asm/assembly.h | 1 - arch/parisc/kernel/entry.S | 19 ++++++++++--------- 2 files changed, 10 insertions(+), 10 deletions(-) diff --git a/arch/parisc/include/asm/assembly.h b/arch/parisc/include/asm/assembly.h index 89fb40005e3f..0da848232344 100644 --- a/arch/parisc/include/asm/assembly.h +++ b/arch/parisc/include/asm/assembly.h @@ -438,7 +438,6 @@ SAVE_SP (%sr4, PT_SR4 (\regs)) SAVE_SP (%sr5, PT_SR5 (\regs)) SAVE_SP (%sr6, PT_SR6 (\regs)) - SAVE_SP (%sr7, PT_SR7 (\regs)) SAVE_CR (%cr17, PT_IASQ0(\regs)) mtctl %r0, %cr17 diff --git a/arch/parisc/kernel/entry.S b/arch/parisc/kernel/entry.S index ae27cb6ce19a..e8f07dd28401 100644 --- a/arch/parisc/kernel/entry.S +++ b/arch/parisc/kernel/entry.S @@ -65,15 +65,11 @@ rsm PSW_SM_I, %r0 /* barrier for "Relied upon Translation */ mtsp %r0, %sr4 mtsp %r0, %sr5 - mfsp %sr7, %r1 - or,= %r0,%r1,%r0 /* Only save sr7 in sr3 if sr7 != 0 */ - mtsp %r1, %sr3 + mtsp %r0, %sr6 tovirt_r1 %r29 load32 KERNEL_PSW, %r1 rsm PSW_SM_QUIET,%r0 /* second "heavy weight" ctl op */ - mtsp %r0, %sr6 - mtsp %r0, %sr7 mtctl %r0, %cr17 /* Clear IIASQ tail */ mtctl %r0, %cr17 /* Clear IIASQ head */ mtctl %r1, %ipsw @@ -119,17 +115,20 @@ /* we save the registers in the task struct */ + copy %r30, %r17 mfctl %cr30, %r1 + ldo THREAD_SZ_ALGN(%r1), %r30 + mtsp %r0,%sr7 + mtsp %r16,%sr3 tophys %r1,%r9 LDREG TI_TASK(%r9), %r1 /* thread_info -> task_struct */ tophys %r1,%r9 ldo TASK_REGS(%r9),%r9 - STREG %r30, PT_GR30(%r9) + STREG %r17,PT_GR30(%r9) STREG %r29,PT_GR29(%r9) STREG %r26,PT_GR26(%r9) + STREG %r16,PT_SR7(%r9) copy %r9,%r29 - mfctl %cr30, %r1 - ldo THREAD_SZ_ALGN(%r1), %r30 .endm .macro get_stack_use_r30 @@ -137,10 +136,12 @@ /* we put a struct pt_regs on the stack and save the registers there */ tophys %r30,%r9 - STREG %r30,PT_GR30(%r9) + copy %r30,%r1 ldo PT_SZ_ALGN(%r30),%r30 + STREG %r1,PT_GR30(%r9) STREG %r29,PT_GR29(%r9) STREG %r26,PT_GR26(%r9) + STREG %r16,PT_SR7(%r9) copy %r9,%r29 .endm -- cgit v1.2.3 From 2c2d32bed1a1bb6121494965b31badb280f04b0e Mon Sep 17 00:00:00 2001 From: Peter Huewe Date: Mon, 20 May 2013 20:56:45 +0000 Subject: parisc/superio: Use module_pci_driver to register driver Removing some boilerplate by using module_pci_driver instead of calling register and unregister in the otherwise empty init/exit functions. Signed-off-by: Peter Huewe Signed-off-by: Helge Deller --- drivers/parisc/superio.c | 13 +------------ 1 file changed, 1 insertion(+), 12 deletions(-) diff --git a/drivers/parisc/superio.c b/drivers/parisc/superio.c index ac6e8e7a02df..a042d065a0c7 100644 --- a/drivers/parisc/superio.c +++ b/drivers/parisc/superio.c @@ -494,15 +494,4 @@ static struct pci_driver superio_driver = { .probe = superio_probe, }; -static int __init superio_modinit(void) -{ - return pci_register_driver(&superio_driver); -} - -static void __exit superio_exit(void) -{ - pci_unregister_driver(&superio_driver); -} - -module_init(superio_modinit); -module_exit(superio_exit); +module_pci_driver(superio_driver); -- cgit v1.2.3 From e9b376671910d105c5e61103111b96209c729529 Mon Sep 17 00:00:00 2001 From: Vahram Martirosyan Date: Fri, 24 May 2013 13:57:12 +0500 Subject: jfs: Several bugs in jfs_freeze() and jfs_unfreeze() The mentioned functions do not pay attention to the error codes returned by the functions updateSuper(), lmLogInit() and lmLogShutdown(). It brings to system crash later when writing to log. The patch adds corresponding code to check and return the error codes and to print correct error messages in case of errors. Found by Linux File System Verification project (linuxtesting.org). Signed-off-by: Vahram Martirosyan Reviewed-by: Gu Zheng Signed-off-by: Dave Kleikamp --- fs/jfs/super.c | 38 ++++++++++++++++++++++++++++++-------- 1 file changed, 30 insertions(+), 8 deletions(-) diff --git a/fs/jfs/super.c b/fs/jfs/super.c index 2003e830ed1c..788e0a9c1fb0 100644 --- a/fs/jfs/super.c +++ b/fs/jfs/super.c @@ -611,11 +611,28 @@ static int jfs_freeze(struct super_block *sb) { struct jfs_sb_info *sbi = JFS_SBI(sb); struct jfs_log *log = sbi->log; + int rc = 0; if (!(sb->s_flags & MS_RDONLY)) { txQuiesce(sb); - lmLogShutdown(log); - updateSuper(sb, FM_CLEAN); + rc = lmLogShutdown(log); + if (rc) { + jfs_error(sb, "jfs_freeze: lmLogShutdown failed"); + + /* let operations fail rather than hang */ + txResume(sb); + + return rc; + } + rc = updateSuper(sb, FM_CLEAN); + if (rc) { + jfs_err("jfs_freeze: updateSuper failed\n"); + /* + * Don't fail here. Everything succeeded except + * marking the superblock clean, so there's really + * no harm in leaving it frozen for now. + */ + } } return 0; } @@ -627,13 +644,18 @@ static int jfs_unfreeze(struct super_block *sb) int rc = 0; if (!(sb->s_flags & MS_RDONLY)) { - updateSuper(sb, FM_MOUNT); - if ((rc = lmLogInit(log))) - jfs_err("jfs_unlock failed with return code %d", rc); - else - txResume(sb); + rc = updateSuper(sb, FM_MOUNT); + if (rc) { + jfs_error(sb, "jfs_unfreeze: updateSuper failed"); + goto out; + } + rc = lmLogInit(log); + if (rc) + jfs_error(sb, "jfs_unfreeze: lmLogInit failed"); +out: + txResume(sb); } - return 0; + return rc; } static struct dentry *jfs_do_mount(struct file_system_type *fs_type, -- cgit v1.2.3 From 95bbb82f60c80808e5a49d8233c2de8451901531 Mon Sep 17 00:00:00 2001 From: Gu Zheng Date: Thu, 23 May 2013 16:14:19 +0800 Subject: fs/jfs: Add check if journaling to disk has been disabled in lbmRead() Signed-off-by: Gu Zheng Signed-off-by: Dave Kleikamp --- fs/jfs/jfs_logmgr.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/fs/jfs/jfs_logmgr.c b/fs/jfs/jfs_logmgr.c index c57499dca89c..360d27c48887 100644 --- a/fs/jfs/jfs_logmgr.c +++ b/fs/jfs/jfs_logmgr.c @@ -2009,7 +2009,13 @@ static int lbmRead(struct jfs_log * log, int pn, struct lbuf ** bpp) bio->bi_end_io = lbmIODone; bio->bi_private = bp; - submit_bio(READ_SYNC, bio); + /*check if journaling to disk has been disabled*/ + if (log->no_integrity) { + bio->bi_size = 0; + lbmIODone(bio, 0); + } else { + submit_bio(READ_SYNC, bio); + } wait_event(bp->l_ioevent, (bp->l_flag != lbmREAD)); -- cgit v1.2.3 From 480d7467e4aaa3dc38088baf56bc3eb3599f5d26 Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Mon, 20 May 2013 09:51:08 +1000 Subject: xfs: fix sub-page blocksize data integrity writes FSX on 512 byte block size filesystems has been failing for some time with corrupted data. The fault dates back to the change in the writeback data integrity algorithm that uses a mark-and-sweep approach to avoid data writeback livelocks. Unfortunately, a side effect of this mark-and-sweep approach is that each page will only be written once for a data integrity sync, and there is a condition in writeback in XFS where a page may require two writeback attempts to be fully written. As a result of the high level change, we now only get a partial page writeback during the integrity sync because the first pass through writeback clears the mark left on the page index to tell writeback that the page needs writeback.... The cause is writing a partial page in the clustering code. This can happen when a mapping boundary falls in the middle of a page - we end up writing back the first part of the page that the mapping covers, but then never revisit the page to have the remainder mapped and written. The fix is simple - if the mapping boundary falls inside a page, then simple abort clustering without touching the page. This means that the next ->writepage entry that write_cache_pages() will make is the page we aborted on, and xfs_vm_writepage() will map all sections of the page correctly. This behaviour is also optimal for non-data integrity writes, as it results in contiguous sequential writeback of the file rather than missing small holes and having to write them a "random" writes in a future pass. With this fix, all the fsx tests in xfstests now pass on a 512 byte block size filesystem on a 4k page machine. Signed-off-by: Dave Chinner Reviewed-by: Brian Foster Signed-off-by: Ben Myers (cherry picked from commit 49b137cbbcc836ef231866c137d24f42c42bb483) --- fs/xfs/xfs_aops.c | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) diff --git a/fs/xfs/xfs_aops.c b/fs/xfs/xfs_aops.c index 2b2691b73428..41a695048be7 100644 --- a/fs/xfs/xfs_aops.c +++ b/fs/xfs/xfs_aops.c @@ -725,6 +725,25 @@ xfs_convert_page( (xfs_off_t)(page->index + 1) << PAGE_CACHE_SHIFT, i_size_read(inode)); + /* + * If the current map does not span the entire page we are about to try + * to write, then give up. The only way we can write a page that spans + * multiple mappings in a single writeback iteration is via the + * xfs_vm_writepage() function. Data integrity writeback requires the + * entire page to be written in a single attempt, otherwise the part of + * the page we don't write here doesn't get written as part of the data + * integrity sync. + * + * For normal writeback, we also don't attempt to write partial pages + * here as it simply means that write_cache_pages() will see it under + * writeback and ignore the page until some point in the future, at + * which time this will be the only page in the file that needs + * writeback. Hence for more optimal IO patterns, we should always + * avoid partial page writeback due to multiple mappings on a page here. + */ + if (!xfs_imap_valid(inode, imap, end_offset)) + goto fail_unlock_page; + len = 1 << inode->i_blkbits; p_offset = min_t(unsigned long, end_offset & (PAGE_CACHE_SIZE - 1), PAGE_CACHE_SIZE); -- cgit v1.2.3 From 68a433f18c0574b50c5952978ca95b0db7347174 Mon Sep 17 00:00:00 2001 From: Tomasz Figa Date: Sat, 25 May 2013 06:27:29 +0900 Subject: ARM: EXYNOS: Fix support of Exynos4210 rev0 SoC This patch extends exynos_init_time() function to handle Exynos4210 rev0 SoC, which differs in availability of system timers and needs different clocksource initialization. This makes it possible to use exynos_init_time() function as init_time callback for all Exynos-based boards, including Universal_C210, which originally had to use samsung_timer_init(). Signed-off-by: Tomasz Figa Signed-off-by: Kyungmin Park Signed-off-by: Kukjin Kim --- arch/arm/mach-exynos/Kconfig | 3 ++- arch/arm/mach-exynos/common.c | 30 +++++++++++++++++++++++++++++- arch/arm/mach-exynos/common.h | 2 ++ arch/arm/mach-exynos/mach-universal_c210.c | 5 ++--- 4 files changed, 35 insertions(+), 5 deletions(-) diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig index d19edff0ea6e..ff18fc2ea46f 100644 --- a/arch/arm/mach-exynos/Kconfig +++ b/arch/arm/mach-exynos/Kconfig @@ -250,6 +250,7 @@ config MACH_ARMLEX4210 config MACH_UNIVERSAL_C210 bool "Mobile UNIVERSAL_C210 Board" select CLKSRC_MMIO + select CLKSRC_SAMSUNG_PWM select CPU_EXYNOS4210 select EXYNOS4_SETUP_FIMC select EXYNOS4_SETUP_FIMD0 @@ -281,7 +282,6 @@ config MACH_UNIVERSAL_C210 select S5P_DEV_TV select S5P_GPIO_INT select S5P_SETUP_MIPIPHY - select SAMSUNG_HRT help Machine support for Samsung Mobile Universal S5PC210 Reference Board. @@ -410,6 +410,7 @@ config MACH_EXYNOS4_DT depends on ARCH_EXYNOS4 select ARM_AMBA select CLKSRC_OF + select CLKSRC_SAMSUNG_PWM if CPU_EXYNOS4210 select CPU_EXYNOS4210 select KEYBOARD_SAMSUNG if INPUT_KEYBOARD select PINCTRL diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c index 745e304ad0de..a2d20120e9fc 100644 --- a/arch/arm/mach-exynos/common.c +++ b/arch/arm/mach-exynos/common.c @@ -10,12 +10,14 @@ */ #include +#include #include #include #include #include #include #include +#include #include #include #include @@ -302,6 +304,13 @@ static struct map_desc exynos5440_iodesc0[] __initdata = { }, }; +static struct samsung_pwm_variant exynos4_pwm_variant = { + .bits = 32, + .div_base = 0, + .has_tint_cstat = true, + .tclk_mask = 0, +}; + void exynos4_restart(char mode, const char *cmd) { __raw_writel(0x1, S5P_SWRESET); @@ -442,8 +451,20 @@ static void __init exynos5440_map_io(void) iotable_init(exynos5440_iodesc0, ARRAY_SIZE(exynos5440_iodesc0)); } +void __init exynos_set_timer_source(u8 channels) +{ + exynos4_pwm_variant.output_mask = BIT(SAMSUNG_PWM_NUM) - 1; + exynos4_pwm_variant.output_mask &= ~channels; +} + void __init exynos_init_time(void) { + unsigned int timer_irqs[SAMSUNG_PWM_NUM] = { + EXYNOS4_IRQ_TIMER0_VIC, EXYNOS4_IRQ_TIMER1_VIC, + EXYNOS4_IRQ_TIMER2_VIC, EXYNOS4_IRQ_TIMER3_VIC, + EXYNOS4_IRQ_TIMER4_VIC, + }; + if (of_have_populated_dt()) { #ifdef CONFIG_OF of_clk_init(NULL); @@ -455,7 +476,14 @@ void __init exynos_init_time(void) exynos4_clk_init(NULL, !soc_is_exynos4210(), S5P_VA_CMU, readl(S5P_VA_CHIPID + 8) & 1); exynos4_clk_register_fixed_ext(xxti_f, xusbxti_f); #endif - mct_init(S5P_VA_SYSTIMER, EXYNOS4_IRQ_MCT_G0, EXYNOS4_IRQ_MCT_L0, EXYNOS4_IRQ_MCT_L1); +#ifdef CONFIG_CLKSRC_SAMSUNG_PWM + if (soc_is_exynos4210() && samsung_rev() == EXYNOS4210_REV_0) + samsung_pwm_clocksource_init(S3C_VA_TIMER, + timer_irqs, &exynos4_pwm_variant); + else +#endif + mct_init(S5P_VA_SYSTIMER, EXYNOS4_IRQ_MCT_G0, + EXYNOS4_IRQ_MCT_L0, EXYNOS4_IRQ_MCT_L1); } } diff --git a/arch/arm/mach-exynos/common.h b/arch/arm/mach-exynos/common.h index 60dd35cc01a6..11fc1e29819b 100644 --- a/arch/arm/mach-exynos/common.h +++ b/arch/arm/mach-exynos/common.h @@ -32,6 +32,8 @@ void exynos4_clk_register_fixed_ext(unsigned long, unsigned long); void exynos_firmware_init(void); +void exynos_set_timer_source(u8 channels); + #ifdef CONFIG_PM_GENERIC_DOMAINS int exynos_pm_late_initcall(void); #else diff --git a/arch/arm/mach-exynos/mach-universal_c210.c b/arch/arm/mach-exynos/mach-universal_c210.c index 327d50d4681d..74ddb2b55614 100644 --- a/arch/arm/mach-exynos/mach-universal_c210.c +++ b/arch/arm/mach-exynos/mach-universal_c210.c @@ -41,7 +41,6 @@ #include #include #include -#include #include #include @@ -1094,7 +1093,7 @@ static void __init universal_map_io(void) { exynos_init_io(NULL, 0); s3c24xx_init_uarts(universal_uartcfgs, ARRAY_SIZE(universal_uartcfgs)); - samsung_set_timer_source(SAMSUNG_PWM2, SAMSUNG_PWM4); + exynos_set_timer_source(BIT(2) | BIT(4)); xxti_f = 0; xusbxti_f = 24000000; } @@ -1154,7 +1153,7 @@ MACHINE_START(UNIVERSAL_C210, "UNIVERSAL_C210") .map_io = universal_map_io, .init_machine = universal_machine_init, .init_late = exynos_init_late, - .init_time = samsung_timer_init, + .init_time = exynos_init_time, .reserve = &universal_reserve, .restart = exynos4_restart, MACHINE_END -- cgit v1.2.3 From 7031d0e1c46e2b1c869458233dd216cb72af41b2 Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Mon, 20 May 2013 09:51:09 +1000 Subject: xfs: fix rounding in xfs_free_file_space The offset passed into xfs_free_file_space() needs to be rounded down to a certain size, but the rounding mask is built by a 32 bit variable. Hence the mask will always mask off the upper 32 bits of the offset and lead to incorrect writeback and invalidation ranges. This is not actually exposed as a bug because we writeback and invalidate from the rounded offset to the end of the file, and hence the offset we are actually punching a hole out of will always be covered by the code. This needs fixing, however, if we ever want to use exact ranges for writeback/invalidation here... Signed-off-by: Dave Chinner Reviewed-by: Brian Foster Signed-off-by: Ben Myers (cherry picked from commit 28ca489c63e9aceed8801d2f82d731b3c9aa50f5) --- fs/xfs/xfs_vnodeops.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/xfs/xfs_vnodeops.c b/fs/xfs/xfs_vnodeops.c index 1501f4fa51a6..0176bb21f09a 100644 --- a/fs/xfs/xfs_vnodeops.c +++ b/fs/xfs/xfs_vnodeops.c @@ -1453,7 +1453,7 @@ xfs_free_file_space( xfs_mount_t *mp; int nimap; uint resblks; - uint rounding; + xfs_off_t rounding; int rt; xfs_fileoff_t startoffset_fsb; xfs_trans_t *tp; @@ -1482,7 +1482,7 @@ xfs_free_file_space( inode_dio_wait(VFS_I(ip)); } - rounding = max_t(uint, 1 << mp->m_sb.sb_blocklog, PAGE_CACHE_SIZE); + rounding = max_t(xfs_off_t, 1 << mp->m_sb.sb_blocklog, PAGE_CACHE_SIZE); ioffset = offset & ~(rounding - 1); error = -filemap_write_and_wait_range(VFS_I(ip)->i_mapping, ioffset, -1); -- cgit v1.2.3 From 509e708a8929c5b75a16c985c03db5329e09cad4 Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Mon, 20 May 2013 09:51:10 +1000 Subject: xfs: Don't reference the EFI after it is freed Checking the EFI for whether it is being released from recovery after we've already released the known active reference is a mistake worthy of a brown paper bag. Fix the (now) obvious use after free that it can cause. Reported-by: Dave Jones Signed-off-by: Dave Chinner Reviewed-by: Brian Foster Signed-off-by: Ben Myers (cherry picked from commit 52c24ad39ff02d7bd73c92eb0c926fb44984a41d) --- fs/xfs/xfs_extfree_item.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/fs/xfs/xfs_extfree_item.c b/fs/xfs/xfs_extfree_item.c index c0f375087efc..452920a3f03f 100644 --- a/fs/xfs/xfs_extfree_item.c +++ b/fs/xfs/xfs_extfree_item.c @@ -305,11 +305,12 @@ xfs_efi_release(xfs_efi_log_item_t *efip, { ASSERT(atomic_read(&efip->efi_next_extent) >= nextents); if (atomic_sub_and_test(nextents, &efip->efi_next_extent)) { - __xfs_efi_release(efip); - /* recovery needs us to drop the EFI reference, too */ if (test_bit(XFS_EFI_RECOVERED, &efip->efi_flags)) __xfs_efi_release(efip); + + __xfs_efi_release(efip); + /* efip may now have been freed, do not reference it again. */ } } -- cgit v1.2.3 From d96b51ec14650b490ab98e738bcc02309396e5bc Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Fri, 24 May 2013 21:27:35 +0000 Subject: parisc: fix irq stack on UP and SMP The logic to detect if the irq stack was already in use with raw_spin_trylock() is wrong, because it will generate a "trylock failure on UP" error message with CONFIG_SMP=n and CONFIG_DEBUG_SPINLOCK=y. arch_spin_trylock() can't be used either since in the CONFIG_SMP=n case no atomic protection is given and we are reentrant here. A mutex didn't worked either and brings more overhead by turning off interrupts. So, let's use the fastest path for parisc which is the ldcw instruction. Counting how often the irq stack was used is pretty useless, so just drop this piece of code. Signed-off-by: Helge Deller --- arch/parisc/include/asm/hardirq.h | 5 ----- arch/parisc/include/asm/processor.h | 21 ------------------- arch/parisc/kernel/irq.c | 41 +++++++++++++++++++++++-------------- 3 files changed, 26 insertions(+), 41 deletions(-) diff --git a/arch/parisc/include/asm/hardirq.h b/arch/parisc/include/asm/hardirq.h index 4c6dd8da1e5d..241c34518465 100644 --- a/arch/parisc/include/asm/hardirq.h +++ b/arch/parisc/include/asm/hardirq.h @@ -17,13 +17,8 @@ typedef struct { unsigned int __softirq_pending; -#ifdef CONFIG_DEBUG_STACKOVERFLOW unsigned int kernel_stack_usage; -#ifdef CONFIG_IRQSTACKS unsigned int irq_stack_usage; - unsigned int irq_stack_counter; -#endif -#endif #ifdef CONFIG_SMP unsigned int irq_resched_count; unsigned int irq_call_count; diff --git a/arch/parisc/include/asm/processor.h b/arch/parisc/include/asm/processor.h index cfbc43929cf6..cc2290a3cace 100644 --- a/arch/parisc/include/asm/processor.h +++ b/arch/parisc/include/asm/processor.h @@ -17,7 +17,6 @@ #include #include #include - #endif /* __ASSEMBLY__ */ /* @@ -58,26 +57,6 @@ #ifndef __ASSEMBLY__ -/* - * IRQ STACK - used for irq handler - */ -#ifdef __KERNEL__ - -#include - -#define IRQ_STACK_SIZE (4096 << 2) /* 16k irq stack size */ - -union irq_stack_union { - unsigned long stack[IRQ_STACK_SIZE/sizeof(unsigned long)]; - raw_spinlock_t lock; -}; - -DECLARE_PER_CPU(union irq_stack_union, irq_stack_union); - -void call_on_stack(unsigned long p1, void *func, unsigned long new_stack); - -#endif /* __KERNEL__ */ - /* * Data detected about CPUs at boot time which is the same for all CPU's. * HP boxes are SMP - ie identical processors. diff --git a/arch/parisc/kernel/irq.c b/arch/parisc/kernel/irq.c index 9c2d953f3de5..2e6443b1e922 100644 --- a/arch/parisc/kernel/irq.c +++ b/arch/parisc/kernel/irq.c @@ -27,11 +27,11 @@ #include #include #include -#include #include #include #include +#include #undef PARISC_IRQ_CR16_COUNTS @@ -172,10 +172,6 @@ int arch_show_interrupts(struct seq_file *p, int prec) for_each_online_cpu(j) seq_printf(p, "%10u ", irq_stats(j)->irq_stack_usage); seq_puts(p, " Interrupt stack usage\n"); - seq_printf(p, "%*s: ", prec, "ISC"); - for_each_online_cpu(j) - seq_printf(p, "%10u ", irq_stats(j)->irq_stack_counter); - seq_puts(p, " Interrupt stack usage counter\n"); # endif #endif #ifdef CONFIG_SMP @@ -384,6 +380,24 @@ static inline int eirr_to_irq(unsigned long eirr) return (BITS_PER_LONG - bit) + TIMER_IRQ; } +#ifdef CONFIG_IRQSTACKS +/* + * IRQ STACK - used for irq handler + */ +#define IRQ_STACK_SIZE (4096 << 2) /* 16k irq stack size */ + +union irq_stack_union { + unsigned long stack[IRQ_STACK_SIZE/sizeof(unsigned long)]; + volatile unsigned int slock[4]; + volatile unsigned int lock[1]; +}; + +DEFINE_PER_CPU(union irq_stack_union, irq_stack_union) = { + .slock = { 1,1,1,1 }, + }; +#endif + + int sysctl_panic_on_stackoverflow = 1; static inline void stack_overflow_check(struct pt_regs *regs) @@ -450,27 +464,26 @@ panic_check: } #ifdef CONFIG_IRQSTACKS -DEFINE_PER_CPU(union irq_stack_union, irq_stack_union) = { - .lock = __RAW_SPIN_LOCK_UNLOCKED((irq_stack_union).lock) - }; +/* in entry.S: */ +void call_on_stack(unsigned long p1, void *func, unsigned long new_stack); static void execute_on_irq_stack(void *func, unsigned long param1) { union irq_stack_union *union_ptr; unsigned long irq_stack; - raw_spinlock_t *irq_stack_in_use; + volatile unsigned int *irq_stack_in_use; union_ptr = &per_cpu(irq_stack_union, smp_processor_id()); irq_stack = (unsigned long) &union_ptr->stack; - irq_stack = ALIGN(irq_stack + sizeof(irq_stack_union.lock), + irq_stack = ALIGN(irq_stack + sizeof(irq_stack_union.slock), 64); /* align for stack frame usage */ /* We may be called recursive. If we are already using the irq stack, * just continue to use it. Use spinlocks to serialize * the irq stack usage. */ - irq_stack_in_use = &union_ptr->lock; - if (!raw_spin_trylock(irq_stack_in_use)) { + irq_stack_in_use = (volatile unsigned int *)__ldcw_align(union_ptr); + if (!__ldcw(irq_stack_in_use)) { void (*direct_call)(unsigned long p1) = func; /* We are using the IRQ stack already. @@ -482,10 +495,8 @@ static void execute_on_irq_stack(void *func, unsigned long param1) /* This is where we switch to the IRQ stack. */ call_on_stack(param1, func, irq_stack); - __inc_irq_stat(irq_stack_counter); - /* free up irq stack usage. */ - do_raw_spin_unlock(irq_stack_in_use); + *irq_stack_in_use = 1; } asmlinkage void do_softirq(void) -- cgit v1.2.3 From b17cb364dbbbf65add79f1610599d01bcb6851f9 Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Mon, 20 May 2013 09:51:12 +1000 Subject: xfs: fix missing KM_NOFS tags to keep lockdep happy There are several places where we use KM_SLEEP allocation contexts and use the fact that they are called from transaction context to add KM_NOFS where appropriate. Unfortunately, there are several places where the code makes this assumption but can be called from outside transaction context but with filesystem locks held. These places need explicit KM_NOFS annotations to avoid lockdep complaining about reclaim contexts. Signed-off-by: Dave Chinner Reviewed-by: Ben Myers Signed-off-by: Ben Myers (cherry picked from commit ac14876cf9255175bf3bdad645bf8aa2b8fb2d7c) --- fs/xfs/xfs_buf.c | 2 +- fs/xfs/xfs_da_btree.c | 6 ++++-- fs/xfs/xfs_dir2_leaf.c | 2 +- fs/xfs/xfs_log_cil.c | 2 +- 4 files changed, 7 insertions(+), 5 deletions(-) diff --git a/fs/xfs/xfs_buf.c b/fs/xfs/xfs_buf.c index 82b70bda9f47..0d2554299688 100644 --- a/fs/xfs/xfs_buf.c +++ b/fs/xfs/xfs_buf.c @@ -1649,7 +1649,7 @@ xfs_alloc_buftarg( { xfs_buftarg_t *btp; - btp = kmem_zalloc(sizeof(*btp), KM_SLEEP); + btp = kmem_zalloc(sizeof(*btp), KM_SLEEP | KM_NOFS); btp->bt_mount = mp; btp->bt_dev = bdev->bd_dev; diff --git a/fs/xfs/xfs_da_btree.c b/fs/xfs/xfs_da_btree.c index 9b26a99ebfe9..41ea7e14a7b6 100644 --- a/fs/xfs/xfs_da_btree.c +++ b/fs/xfs/xfs_da_btree.c @@ -2464,7 +2464,8 @@ xfs_buf_map_from_irec( ASSERT(nirecs >= 1); if (nirecs > 1) { - map = kmem_zalloc(nirecs * sizeof(struct xfs_buf_map), KM_SLEEP); + map = kmem_zalloc(nirecs * sizeof(struct xfs_buf_map), + KM_SLEEP | KM_NOFS); if (!map) return ENOMEM; *mapp = map; @@ -2520,7 +2521,8 @@ xfs_dabuf_map( * Optimize the one-block case. */ if (nfsb != 1) - irecs = kmem_zalloc(sizeof(irec) * nfsb, KM_SLEEP); + irecs = kmem_zalloc(sizeof(irec) * nfsb, + KM_SLEEP | KM_NOFS); nirecs = nfsb; error = xfs_bmapi_read(dp, (xfs_fileoff_t)bno, nfsb, irecs, diff --git a/fs/xfs/xfs_dir2_leaf.c b/fs/xfs/xfs_dir2_leaf.c index 721ba2fe8e54..da71a1819d78 100644 --- a/fs/xfs/xfs_dir2_leaf.c +++ b/fs/xfs/xfs_dir2_leaf.c @@ -1336,7 +1336,7 @@ xfs_dir2_leaf_getdents( mp->m_sb.sb_blocksize); map_info = kmem_zalloc(offsetof(struct xfs_dir2_leaf_map_info, map) + (length * sizeof(struct xfs_bmbt_irec)), - KM_SLEEP); + KM_SLEEP | KM_NOFS); map_info->map_size = length; /* diff --git a/fs/xfs/xfs_log_cil.c b/fs/xfs/xfs_log_cil.c index e3d0b85d852b..d0833b54e55d 100644 --- a/fs/xfs/xfs_log_cil.c +++ b/fs/xfs/xfs_log_cil.c @@ -139,7 +139,7 @@ xlog_cil_prepare_log_vecs( new_lv = kmem_zalloc(sizeof(*new_lv) + niovecs * sizeof(struct xfs_log_iovec), - KM_SLEEP); + KM_SLEEP|KM_NOFS); /* The allocated iovec region lies beyond the log vector. */ new_lv->lv_iovecp = (struct xfs_log_iovec *)&new_lv[1]; -- cgit v1.2.3 From 7ced60cae46cb37273a03c196e6f473b089bd8e1 Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Mon, 20 May 2013 09:51:13 +1000 Subject: xfs: xfs_da3_node_read_verify() doesn't handle XFS_ATTR3_LEAF_MAGIC Signed-off-by: Dave Chinner Reviewed-by: Ben Myers Signed-off-by: Ben Myers (cherry picked from commit 72916fb8cbcf0c2928f56cdc2fbe8c7bf5517758) --- fs/xfs/xfs_da_btree.c | 1 + 1 file changed, 1 insertion(+) diff --git a/fs/xfs/xfs_da_btree.c b/fs/xfs/xfs_da_btree.c index 41ea7e14a7b6..0b8b2a13cd24 100644 --- a/fs/xfs/xfs_da_btree.c +++ b/fs/xfs/xfs_da_btree.c @@ -270,6 +270,7 @@ xfs_da3_node_read_verify( break; return; case XFS_ATTR_LEAF_MAGIC: + case XFS_ATTR3_LEAF_MAGIC: bp->b_ops = &xfs_attr3_leaf_buf_ops; bp->b_ops->verify_read(bp); return; -- cgit v1.2.3 From cf257abf02709dba3cc745d950f144ce49432b4f Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Mon, 20 May 2013 09:51:14 +1000 Subject: xfs: xfs_attr_shortform_allfit() does not handle attr3 format. xfstests generic/117 fails with: XFS: Assertion failed: leaf->hdr.info.magic == cpu_to_be16(XFS_ATTR_LEAF_MAGIC) indicating a function that does not handle the attr3 format correctly. Fix it. Signed-off-by: Dave Chinner Reviewed-by: Ben Myers Signed-off-by: Ben Myers (cherry picked from commit b38958d715316031fe9ea0cc6c22043072a55f49) --- fs/xfs/xfs_attr_leaf.c | 24 +++++++++++++----------- 1 file changed, 13 insertions(+), 11 deletions(-) diff --git a/fs/xfs/xfs_attr_leaf.c b/fs/xfs/xfs_attr_leaf.c index 08d5457c948e..8eeb88fb3201 100644 --- a/fs/xfs/xfs_attr_leaf.c +++ b/fs/xfs/xfs_attr_leaf.c @@ -931,20 +931,22 @@ xfs_attr_shortform_list(xfs_attr_list_context_t *context) */ int xfs_attr_shortform_allfit( - struct xfs_buf *bp, - struct xfs_inode *dp) + struct xfs_buf *bp, + struct xfs_inode *dp) { - xfs_attr_leafblock_t *leaf; - xfs_attr_leaf_entry_t *entry; + struct xfs_attr_leafblock *leaf; + struct xfs_attr_leaf_entry *entry; xfs_attr_leaf_name_local_t *name_loc; - int bytes, i; + struct xfs_attr3_icleaf_hdr leafhdr; + int bytes; + int i; leaf = bp->b_addr; - ASSERT(leaf->hdr.info.magic == cpu_to_be16(XFS_ATTR_LEAF_MAGIC)); + xfs_attr3_leaf_hdr_from_disk(&leafhdr, leaf); + entry = xfs_attr3_leaf_entryp(leaf); - entry = &leaf->entries[0]; bytes = sizeof(struct xfs_attr_sf_hdr); - for (i = 0; i < be16_to_cpu(leaf->hdr.count); entry++, i++) { + for (i = 0; i < leafhdr.count; entry++, i++) { if (entry->flags & XFS_ATTR_INCOMPLETE) continue; /* don't copy partial entries */ if (!(entry->flags & XFS_ATTR_LOCAL)) @@ -954,15 +956,15 @@ xfs_attr_shortform_allfit( return(0); if (be16_to_cpu(name_loc->valuelen) >= XFS_ATTR_SF_ENTSIZE_MAX) return(0); - bytes += sizeof(struct xfs_attr_sf_entry)-1 + bytes += sizeof(struct xfs_attr_sf_entry) - 1 + name_loc->namelen + be16_to_cpu(name_loc->valuelen); } if ((dp->i_mount->m_flags & XFS_MOUNT_ATTR2) && (dp->i_d.di_format != XFS_DINODE_FMT_BTREE) && (bytes == sizeof(struct xfs_attr_sf_hdr))) - return(-1); - return(xfs_attr_shortform_bytesfit(dp, bytes)); + return -1; + return xfs_attr_shortform_bytesfit(dp, bytes); } /* -- cgit v1.2.3 From 7ae077802c9f12959a81fa1a16c1ec2842dbae05 Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Mon, 20 May 2013 09:51:16 +1000 Subject: xfs: remote attribute lookups require the value length When reading a remote attribute, to correctly calculate the length of the data buffer for CRC enable filesystems, we need to know the length of the attribute data. We get this information when we look up the attribute, but we don't store it in the args structure along with the other remote attr information we get from the lookup. Add this information to the args structure so we can use it appropriately. Signed-off-by: Dave Chinner Reviewed-by: Ben Myers Signed-off-by: Ben Myers (cherry picked from commit e461fcb194172b3f709e0b478d2ac1bdac7ab9a3) --- fs/xfs/xfs_attr_leaf.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/fs/xfs/xfs_attr_leaf.c b/fs/xfs/xfs_attr_leaf.c index 8eeb88fb3201..0bce1b348580 100644 --- a/fs/xfs/xfs_attr_leaf.c +++ b/fs/xfs/xfs_attr_leaf.c @@ -2332,9 +2332,10 @@ xfs_attr3_leaf_lookup_int( if (!xfs_attr_namesp_match(args->flags, entry->flags)) continue; args->index = probe; + args->valuelen = be32_to_cpu(name_rmt->valuelen); args->rmtblkno = be32_to_cpu(name_rmt->valueblk); args->rmtblkcnt = XFS_B_TO_FSB(args->dp->i_mount, - be32_to_cpu(name_rmt->valuelen)); + args->valuelen); return XFS_ERROR(EEXIST); } } -- cgit v1.2.3 From 1ba830c9997214a7fbe4d91cf238793764620e3b Mon Sep 17 00:00:00 2001 From: Jungseok Lee Date: Sat, 25 May 2013 06:33:03 +0900 Subject: ARM: EXYNOS: fix software reset logic for EXYNOS5440 SOC This patch fixes software reset logic. Software reset applies only to powered-on domains in SOC because software reset to all domains causes reboot failure. Signed-off-by: Jungseok Lee Signed-off-by: Kukjin Kim --- arch/arm/mach-exynos/common.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c index a2d20120e9fc..027c9e7f0d13 100644 --- a/arch/arm/mach-exynos/common.c +++ b/arch/arm/mach-exynos/common.c @@ -326,9 +326,16 @@ void exynos5_restart(char mode, const char *cmd) val = 0x1; addr = EXYNOS_SWRESET; } else if (of_machine_is_compatible("samsung,exynos5440")) { + u32 status; np = of_find_compatible_node(NULL, NULL, "samsung,exynos5440-clock"); + + addr = of_iomap(np, 0) + 0xbc; + status = __raw_readl(addr); + addr = of_iomap(np, 0) + 0xcc; - val = (0xfff << 20) | (0x1 << 16); + val = __raw_readl(addr); + + val = (val & 0xffff0000) | (status & 0xffff); } else { pr_err("%s: cannot support non-DT\n", __func__); return; -- cgit v1.2.3 From 15f504f0c2038b9a0f1569c9ce34def61f0c65be Mon Sep 17 00:00:00 2001 From: Tomasz Figa Date: Sat, 25 May 2013 06:49:43 +0900 Subject: ARM: SAMSUNG: Add names to fimd0 IRQ resources Since commit 1977e6d8 (drm/exynos: change the method for getting the interrupt) the Exynos DRM FIMD driver requires IRQ resources to be named. This patch fixes probe failure in non-DT cases by adding appropriate resource names to fimd0 platform device. Signed-off-by: Tomasz Figa Signed-off-by: Kyungmin Park Signed-off-by: Kukjin Kim --- arch/arm/plat-samsung/devs.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/arm/plat-samsung/devs.c b/arch/arm/plat-samsung/devs.c index 30c2fe243f76..0f9c3f431a5f 100644 --- a/arch/arm/plat-samsung/devs.c +++ b/arch/arm/plat-samsung/devs.c @@ -311,9 +311,9 @@ struct platform_device s5p_device_jpeg = { #ifdef CONFIG_S5P_DEV_FIMD0 static struct resource s5p_fimd0_resource[] = { [0] = DEFINE_RES_MEM(S5P_PA_FIMD0, SZ_32K), - [1] = DEFINE_RES_IRQ(IRQ_FIMD0_VSYNC), - [2] = DEFINE_RES_IRQ(IRQ_FIMD0_FIFO), - [3] = DEFINE_RES_IRQ(IRQ_FIMD0_SYSTEM), + [1] = DEFINE_RES_IRQ_NAMED(IRQ_FIMD0_VSYNC, "vsync"), + [2] = DEFINE_RES_IRQ_NAMED(IRQ_FIMD0_FIFO, "fifo"), + [3] = DEFINE_RES_IRQ_NAMED(IRQ_FIMD0_SYSTEM, "lcd_sys"), }; struct platform_device s5p_device_fimd0 = { -- cgit v1.2.3 From 585dc0c2f68981c02a0bb6fc8fe191a3f513959c Mon Sep 17 00:00:00 2001 From: Gernot Vormayr Date: Fri, 24 May 2013 15:55:03 -0700 Subject: drivers/block/xsysace.c: fix id with missing port-number If the port number is missing from the device-tree the device gets named xs` instead of xsa. This fixes the check for missing ids. Tested on ml507 board. Signed-off-by: Gernot Vormayr Cc: Greg Kroah-Hartman Cc: Jens Axboe Cc: Grant Likely Cc: Rob Herring Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/block/xsysace.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/block/xsysace.c b/drivers/block/xsysace.c index f8ef15f37c5e..3fd130fdfbc1 100644 --- a/drivers/block/xsysace.c +++ b/drivers/block/xsysace.c @@ -1160,8 +1160,7 @@ static int ace_probe(struct platform_device *dev) dev_dbg(&dev->dev, "ace_probe(%p)\n", dev); /* device id and bus width */ - of_property_read_u32(dev->dev.of_node, "port-number", &id); - if (id < 0) + if (of_property_read_u32(dev->dev.of_node, "port-number", &id)) id = 0; if (of_find_property(dev->dev.of_node, "8-bit", NULL)) bus_width = ACE_BUS_WIDTH_8; -- cgit v1.2.3 From a11650e11093ed57dca78bf16e7836517c599098 Mon Sep 17 00:00:00 2001 From: Alexandre Bounine Date: Fri, 24 May 2013 15:55:05 -0700 Subject: rapidio: make enumeration/discovery configurable Systems that use RapidIO fabric may need to implement their own enumeration and discovery methods which are better suitable for needs of a target application. The following set of patches is intended to simplify process of introduction of new RapidIO fabric enumeration/discovery methods. The first patch offers ability to add new RapidIO enumeration/discovery methods using kernel configuration options. This new configuration option mechanism allows to select statically linked or modular enumeration/discovery method(s) from the list of existing methods or use external module(s). This patch also updates the currently existing enumeration/discovery code to be used as a statically linked or modular method. The corresponding configuration option is named "Basic enumeration/discovery" method. This is the only one configuration option available today but new methods are expected to be introduced after adoption of provided patches. The second patch address a long time complaint of RapidIO subsystem users regarding fabric enumeration/discovery start sequence. Existing implementation offers only a boot-time enumeration/discovery start which requires synchronized boot of all endpoints in RapidIO network. While it works for small closed configurations with limited number of endpoints, using this approach in systems with large number of endpoints is quite challenging. To eliminate requirement for synchronized start the second patch introduces RapidIO enumeration/discovery start from user space. For compatibility with the existing RapidIO subsystem implementation, automatic boot time enumeration/discovery start can be configured in by specifying "rio-scan.scan=1" command line parameter if statically linked basic enumeration method is selected. This patch: Rework to implement RapidIO enumeration/discovery method selection combined with ability to use enumeration/discovery as a kernel module. This patch adds ability to introduce new RapidIO enumeration/discovery methods using kernel configuration options. Configuration option mechanism allows to select statically linked or modular enumeration/discovery method from the list of existing methods or use external modules. If a modular enumeration/discovery is selected each RapidIO mport device can have its own method attached to it. The existing enumeration/discovery code was updated to be used as statically linked or modular method. This configuration option is named "Basic enumeration/discovery" method. Several common routines have been moved from rio-scan.c to make them available to other enumeration methods and reduce number of exported symbols. Signed-off-by: Alexandre Bounine Cc: Matt Porter Cc: Li Yang Cc: Kumar Gala Cc: Andre van Herk Cc: Micha Nelissen Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/rapidio/Kconfig | 20 ++++ drivers/rapidio/Makefile | 3 +- drivers/rapidio/rio-driver.c | 7 ++ drivers/rapidio/rio-scan.c | 166 ++++++++------------------------ drivers/rapidio/rio.c | 222 +++++++++++++++++++++++++++++++++++++++++-- drivers/rapidio/rio.h | 11 ++- include/linux/rio.h | 13 ++- include/linux/rio_drv.h | 1 + 8 files changed, 304 insertions(+), 139 deletions(-) diff --git a/drivers/rapidio/Kconfig b/drivers/rapidio/Kconfig index 6194d35ebb97..5ab056494bbe 100644 --- a/drivers/rapidio/Kconfig +++ b/drivers/rapidio/Kconfig @@ -47,4 +47,24 @@ config RAPIDIO_DEBUG If you are unsure about this, say N here. +choice + prompt "Enumeration method" + depends on RAPIDIO + default RAPIDIO_ENUM_BASIC + help + There are different enumeration and discovery mechanisms offered + for RapidIO subsystem. You may select single built-in method or + or any number of methods to be built as modules. + Selecting a built-in method disables use of loadable methods. + + If unsure, select Basic built-in. + +config RAPIDIO_ENUM_BASIC + tristate "Basic" + help + This option includes basic RapidIO fabric enumeration and discovery + mechanism similar to one described in RapidIO specification Annex 1. + +endchoice + source "drivers/rapidio/switches/Kconfig" diff --git a/drivers/rapidio/Makefile b/drivers/rapidio/Makefile index ec3fb8121004..3036702ffe8b 100644 --- a/drivers/rapidio/Makefile +++ b/drivers/rapidio/Makefile @@ -1,7 +1,8 @@ # # Makefile for RapidIO interconnect services # -obj-y += rio.o rio-access.o rio-driver.o rio-scan.o rio-sysfs.o +obj-y += rio.o rio-access.o rio-driver.o rio-sysfs.o +obj-$(CONFIG_RAPIDIO_ENUM_BASIC) += rio-scan.o obj-$(CONFIG_RAPIDIO) += switches/ obj-$(CONFIG_RAPIDIO) += devices/ diff --git a/drivers/rapidio/rio-driver.c b/drivers/rapidio/rio-driver.c index 0f4a53bdaa3c..55850bb21480 100644 --- a/drivers/rapidio/rio-driver.c +++ b/drivers/rapidio/rio-driver.c @@ -164,6 +164,13 @@ void rio_unregister_driver(struct rio_driver *rdrv) driver_unregister(&rdrv->driver); } +void rio_attach_device(struct rio_dev *rdev) +{ + rdev->dev.bus = &rio_bus_type; + rdev->dev.parent = &rio_bus; +} +EXPORT_SYMBOL_GPL(rio_attach_device); + /** * rio_match_bus - Tell if a RIO device structure has a matching RIO driver device id structure * @dev: the standard device structure to match against diff --git a/drivers/rapidio/rio-scan.c b/drivers/rapidio/rio-scan.c index a965acd3c0e4..7bdc67419cc3 100644 --- a/drivers/rapidio/rio-scan.c +++ b/drivers/rapidio/rio-scan.c @@ -37,12 +37,8 @@ #include "rio.h" -LIST_HEAD(rio_devices); - static void rio_init_em(struct rio_dev *rdev); -DEFINE_SPINLOCK(rio_global_list_lock); - static int next_destid = 0; static int next_comptag = 1; @@ -326,127 +322,6 @@ static int rio_is_switch(struct rio_dev *rdev) return 0; } -/** - * rio_switch_init - Sets switch operations for a particular vendor switch - * @rdev: RIO device - * @do_enum: Enumeration/Discovery mode flag - * - * Searches the RIO switch ops table for known switch types. If the vid - * and did match a switch table entry, then call switch initialization - * routine to setup switch-specific routines. - */ -static void rio_switch_init(struct rio_dev *rdev, int do_enum) -{ - struct rio_switch_ops *cur = __start_rio_switch_ops; - struct rio_switch_ops *end = __end_rio_switch_ops; - - while (cur < end) { - if ((cur->vid == rdev->vid) && (cur->did == rdev->did)) { - pr_debug("RIO: calling init routine for %s\n", - rio_name(rdev)); - cur->init_hook(rdev, do_enum); - break; - } - cur++; - } - - if ((cur >= end) && (rdev->pef & RIO_PEF_STD_RT)) { - pr_debug("RIO: adding STD routing ops for %s\n", - rio_name(rdev)); - rdev->rswitch->add_entry = rio_std_route_add_entry; - rdev->rswitch->get_entry = rio_std_route_get_entry; - rdev->rswitch->clr_table = rio_std_route_clr_table; - } - - if (!rdev->rswitch->add_entry || !rdev->rswitch->get_entry) - printk(KERN_ERR "RIO: missing routing ops for %s\n", - rio_name(rdev)); -} - -/** - * rio_add_device- Adds a RIO device to the device model - * @rdev: RIO device - * - * Adds the RIO device to the global device list and adds the RIO - * device to the RIO device list. Creates the generic sysfs nodes - * for an RIO device. - */ -static int rio_add_device(struct rio_dev *rdev) -{ - int err; - - err = device_add(&rdev->dev); - if (err) - return err; - - spin_lock(&rio_global_list_lock); - list_add_tail(&rdev->global_list, &rio_devices); - spin_unlock(&rio_global_list_lock); - - rio_create_sysfs_dev_files(rdev); - - return 0; -} - -/** - * rio_enable_rx_tx_port - enable input receiver and output transmitter of - * given port - * @port: Master port associated with the RIO network - * @local: local=1 select local port otherwise a far device is reached - * @destid: Destination ID of the device to check host bit - * @hopcount: Number of hops to reach the target - * @port_num: Port (-number on switch) to enable on a far end device - * - * Returns 0 or 1 from on General Control Command and Status Register - * (EXT_PTR+0x3C) - */ -inline int rio_enable_rx_tx_port(struct rio_mport *port, - int local, u16 destid, - u8 hopcount, u8 port_num) { -#ifdef CONFIG_RAPIDIO_ENABLE_RX_TX_PORTS - u32 regval; - u32 ext_ftr_ptr; - - /* - * enable rx input tx output port - */ - pr_debug("rio_enable_rx_tx_port(local = %d, destid = %d, hopcount = " - "%d, port_num = %d)\n", local, destid, hopcount, port_num); - - ext_ftr_ptr = rio_mport_get_physefb(port, local, destid, hopcount); - - if (local) { - rio_local_read_config_32(port, ext_ftr_ptr + - RIO_PORT_N_CTL_CSR(0), - ®val); - } else { - if (rio_mport_read_config_32(port, destid, hopcount, - ext_ftr_ptr + RIO_PORT_N_CTL_CSR(port_num), ®val) < 0) - return -EIO; - } - - if (regval & RIO_PORT_N_CTL_P_TYP_SER) { - /* serial */ - regval = regval | RIO_PORT_N_CTL_EN_RX_SER - | RIO_PORT_N_CTL_EN_TX_SER; - } else { - /* parallel */ - regval = regval | RIO_PORT_N_CTL_EN_RX_PAR - | RIO_PORT_N_CTL_EN_TX_PAR; - } - - if (local) { - rio_local_write_config_32(port, ext_ftr_ptr + - RIO_PORT_N_CTL_CSR(0), regval); - } else { - if (rio_mport_write_config_32(port, destid, hopcount, - ext_ftr_ptr + RIO_PORT_N_CTL_CSR(port_num), regval) < 0) - return -EIO; - } -#endif - return 0; -} - /** * rio_setup_device- Allocates and sets up a RIO device * @net: RIO network @@ -587,8 +462,7 @@ static struct rio_dev *rio_setup_device(struct rio_net *net, rdev->destid); } - rdev->dev.bus = &rio_bus_type; - rdev->dev.parent = &rio_bus; + rio_attach_device(rdev); device_initialize(&rdev->dev); rdev->dev.release = rio_release_dev; @@ -1421,3 +1295,41 @@ enum_done: bail: return -EBUSY; } + +static struct rio_scan rio_scan_ops = { + .enumerate = rio_enum_mport, + .discover = rio_disc_mport, +}; + +static bool scan; +module_param(scan, bool, 0); +MODULE_PARM_DESC(scan, "Start RapidIO network enumeration/discovery " + "(default = 0)"); + +/** + * rio_basic_attach: + * + * When this enumeration/discovery method is loaded as a module this function + * registers its specific enumeration and discover routines for all available + * RapidIO mport devices. The "scan" command line parameter controls ability of + * the module to start RapidIO enumeration/discovery automatically. + * + * Returns 0 for success or -EIO if unable to register itself. + * + * This enumeration/discovery method cannot be unloaded and therefore does not + * provide a matching cleanup_module routine. + */ + +static int __init rio_basic_attach(void) +{ + if (rio_register_scan(RIO_MPORT_ANY, &rio_scan_ops)) + return -EIO; + if (scan) + rio_init_mports(); + return 0; +} + +late_initcall(rio_basic_attach); + +MODULE_DESCRIPTION("Basic RapidIO enumeration/discovery"); +MODULE_LICENSE("GPL"); diff --git a/drivers/rapidio/rio.c b/drivers/rapidio/rio.c index d553b5d13722..6e75dda34799 100644 --- a/drivers/rapidio/rio.c +++ b/drivers/rapidio/rio.c @@ -31,7 +31,11 @@ #include "rio.h" +static LIST_HEAD(rio_devices); +static DEFINE_SPINLOCK(rio_global_list_lock); + static LIST_HEAD(rio_mports); +static DEFINE_MUTEX(rio_mport_list_lock); static unsigned char next_portid; static DEFINE_SPINLOCK(rio_mmap_lock); @@ -52,6 +56,32 @@ u16 rio_local_get_device_id(struct rio_mport *port) return (RIO_GET_DID(port->sys_size, result)); } +/** + * rio_add_device- Adds a RIO device to the device model + * @rdev: RIO device + * + * Adds the RIO device to the global device list and adds the RIO + * device to the RIO device list. Creates the generic sysfs nodes + * for an RIO device. + */ +int rio_add_device(struct rio_dev *rdev) +{ + int err; + + err = device_add(&rdev->dev); + if (err) + return err; + + spin_lock(&rio_global_list_lock); + list_add_tail(&rdev->global_list, &rio_devices); + spin_unlock(&rio_global_list_lock); + + rio_create_sysfs_dev_files(rdev); + + return 0; +} +EXPORT_SYMBOL_GPL(rio_add_device); + /** * rio_request_inb_mbox - request inbound mailbox service * @mport: RIO master port from which to allocate the mailbox resource @@ -489,6 +519,7 @@ rio_mport_get_physefb(struct rio_mport *port, int local, return ext_ftr_ptr; } +EXPORT_SYMBOL_GPL(rio_mport_get_physefb); /** * rio_get_comptag - Begin or continue searching for a RIO device by component tag @@ -521,6 +552,7 @@ exit: spin_unlock(&rio_global_list_lock); return rdev; } +EXPORT_SYMBOL_GPL(rio_get_comptag); /** * rio_set_port_lockout - Sets/clears LOCKOUT bit (RIO EM 1.3) for a switch port. @@ -545,6 +577,107 @@ int rio_set_port_lockout(struct rio_dev *rdev, u32 pnum, int lock) regval); return 0; } +EXPORT_SYMBOL_GPL(rio_set_port_lockout); + +/** + * rio_switch_init - Sets switch operations for a particular vendor switch + * @rdev: RIO device + * @do_enum: Enumeration/Discovery mode flag + * + * Searches the RIO switch ops table for known switch types. If the vid + * and did match a switch table entry, then call switch initialization + * routine to setup switch-specific routines. + */ +void rio_switch_init(struct rio_dev *rdev, int do_enum) +{ + struct rio_switch_ops *cur = __start_rio_switch_ops; + struct rio_switch_ops *end = __end_rio_switch_ops; + + while (cur < end) { + if ((cur->vid == rdev->vid) && (cur->did == rdev->did)) { + pr_debug("RIO: calling init routine for %s\n", + rio_name(rdev)); + cur->init_hook(rdev, do_enum); + break; + } + cur++; + } + + if ((cur >= end) && (rdev->pef & RIO_PEF_STD_RT)) { + pr_debug("RIO: adding STD routing ops for %s\n", + rio_name(rdev)); + rdev->rswitch->add_entry = rio_std_route_add_entry; + rdev->rswitch->get_entry = rio_std_route_get_entry; + rdev->rswitch->clr_table = rio_std_route_clr_table; + } + + if (!rdev->rswitch->add_entry || !rdev->rswitch->get_entry) + printk(KERN_ERR "RIO: missing routing ops for %s\n", + rio_name(rdev)); +} +EXPORT_SYMBOL_GPL(rio_switch_init); + +/** + * rio_enable_rx_tx_port - enable input receiver and output transmitter of + * given port + * @port: Master port associated with the RIO network + * @local: local=1 select local port otherwise a far device is reached + * @destid: Destination ID of the device to check host bit + * @hopcount: Number of hops to reach the target + * @port_num: Port (-number on switch) to enable on a far end device + * + * Returns 0 or 1 from on General Control Command and Status Register + * (EXT_PTR+0x3C) + */ +int rio_enable_rx_tx_port(struct rio_mport *port, + int local, u16 destid, + u8 hopcount, u8 port_num) +{ +#ifdef CONFIG_RAPIDIO_ENABLE_RX_TX_PORTS + u32 regval; + u32 ext_ftr_ptr; + + /* + * enable rx input tx output port + */ + pr_debug("rio_enable_rx_tx_port(local = %d, destid = %d, hopcount = " + "%d, port_num = %d)\n", local, destid, hopcount, port_num); + + ext_ftr_ptr = rio_mport_get_physefb(port, local, destid, hopcount); + + if (local) { + rio_local_read_config_32(port, ext_ftr_ptr + + RIO_PORT_N_CTL_CSR(0), + ®val); + } else { + if (rio_mport_read_config_32(port, destid, hopcount, + ext_ftr_ptr + RIO_PORT_N_CTL_CSR(port_num), ®val) < 0) + return -EIO; + } + + if (regval & RIO_PORT_N_CTL_P_TYP_SER) { + /* serial */ + regval = regval | RIO_PORT_N_CTL_EN_RX_SER + | RIO_PORT_N_CTL_EN_TX_SER; + } else { + /* parallel */ + regval = regval | RIO_PORT_N_CTL_EN_RX_PAR + | RIO_PORT_N_CTL_EN_TX_PAR; + } + + if (local) { + rio_local_write_config_32(port, ext_ftr_ptr + + RIO_PORT_N_CTL_CSR(0), regval); + } else { + if (rio_mport_write_config_32(port, destid, hopcount, + ext_ftr_ptr + RIO_PORT_N_CTL_CSR(port_num), regval) < 0) + return -EIO; + } +#endif + return 0; +} +EXPORT_SYMBOL_GPL(rio_enable_rx_tx_port); + /** * rio_chk_dev_route - Validate route to the specified device. @@ -610,6 +743,7 @@ rio_mport_chk_dev_access(struct rio_mport *mport, u16 destid, u8 hopcount) return 0; } +EXPORT_SYMBOL_GPL(rio_mport_chk_dev_access); /** * rio_chk_dev_access - Validate access to the specified device. @@ -941,6 +1075,7 @@ rio_mport_get_efb(struct rio_mport *port, int local, u16 destid, return RIO_GET_BLOCK_ID(reg_val); } } +EXPORT_SYMBOL_GPL(rio_mport_get_efb); /** * rio_mport_get_feature - query for devices' extended features @@ -997,6 +1132,7 @@ rio_mport_get_feature(struct rio_mport * port, int local, u16 destid, return 0; } +EXPORT_SYMBOL_GPL(rio_mport_get_feature); /** * rio_get_asm - Begin or continue searching for a RIO device by vid/did/asm_vid/asm_did @@ -1246,6 +1382,71 @@ EXPORT_SYMBOL_GPL(rio_dma_prep_slave_sg); #endif /* CONFIG_RAPIDIO_DMA_ENGINE */ +/** + * rio_register_scan - enumeration/discovery method registration interface + * @mport_id: mport device ID for which fabric scan routine has to be set + * (RIO_MPORT_ANY = set for all available mports) + * @scan_ops: enumeration/discovery control structure + * + * Assigns enumeration or discovery method to the specified mport device (or all + * available mports if RIO_MPORT_ANY is specified). + * Returns error if the mport already has an enumerator attached to it. + * In case of RIO_MPORT_ANY ignores ports with valid scan routines and returns + * an error if was unable to find at least one available mport. + */ +int rio_register_scan(int mport_id, struct rio_scan *scan_ops) +{ + struct rio_mport *port; + int rc = -EBUSY; + + mutex_lock(&rio_mport_list_lock); + list_for_each_entry(port, &rio_mports, node) { + if (port->id == mport_id || mport_id == RIO_MPORT_ANY) { + if (port->nscan && mport_id == RIO_MPORT_ANY) + continue; + else if (port->nscan) + break; + + port->nscan = scan_ops; + rc = 0; + + if (mport_id != RIO_MPORT_ANY) + break; + } + } + mutex_unlock(&rio_mport_list_lock); + + return rc; +} +EXPORT_SYMBOL_GPL(rio_register_scan); + +/** + * rio_unregister_scan - removes enumeration/discovery method from mport + * @mport_id: mport device ID for which fabric scan routine has to be + * unregistered (RIO_MPORT_ANY = set for all available mports) + * + * Removes enumeration or discovery method assigned to the specified mport + * device (or all available mports if RIO_MPORT_ANY is specified). + */ +int rio_unregister_scan(int mport_id) +{ + struct rio_mport *port; + + mutex_lock(&rio_mport_list_lock); + list_for_each_entry(port, &rio_mports, node) { + if (port->id == mport_id || mport_id == RIO_MPORT_ANY) { + if (port->nscan) + port->nscan = NULL; + if (mport_id != RIO_MPORT_ANY) + break; + } + } + mutex_unlock(&rio_mport_list_lock); + + return 0; +} +EXPORT_SYMBOL_GPL(rio_unregister_scan); + static void rio_fixup_device(struct rio_dev *dev) { } @@ -1274,7 +1475,7 @@ static void disc_work_handler(struct work_struct *_work) work = container_of(_work, struct rio_disc_work, work); pr_debug("RIO: discovery work for mport %d %s\n", work->mport->id, work->mport->name); - rio_disc_mport(work->mport); + work->mport->nscan->discover(work->mport); } int rio_init_mports(void) @@ -1290,12 +1491,15 @@ int rio_init_mports(void) * First, run enumerations and check if we need to perform discovery * on any of the registered mports. */ + mutex_lock(&rio_mport_list_lock); list_for_each_entry(port, &rio_mports, node) { - if (port->host_deviceid >= 0) - rio_enum_mport(port); - else + if (port->host_deviceid >= 0) { + if (port->nscan) + port->nscan->enumerate(port); + } else n++; } + mutex_unlock(&rio_mport_list_lock); if (!n) goto no_disc; @@ -1322,14 +1526,16 @@ int rio_init_mports(void) } n = 0; + mutex_lock(&rio_mport_list_lock); list_for_each_entry(port, &rio_mports, node) { - if (port->host_deviceid < 0) { + if (port->host_deviceid < 0 && port->nscan) { work[n].mport = port; INIT_WORK(&work[n].work, disc_work_handler); queue_work(rio_wq, &work[n].work); n++; } } + mutex_unlock(&rio_mport_list_lock); flush_workqueue(rio_wq); pr_debug("RIO: destroy discovery workqueue\n"); @@ -1342,8 +1548,6 @@ no_disc: return 0; } -device_initcall_sync(rio_init_mports); - static int hdids[RIO_MAX_MPORTS + 1]; static int rio_get_hdid(int index) @@ -1371,7 +1575,10 @@ int rio_register_mport(struct rio_mport *port) port->id = next_portid++; port->host_deviceid = rio_get_hdid(port->id); + port->nscan = NULL; + mutex_lock(&rio_mport_list_lock); list_add_tail(&port->node, &rio_mports); + mutex_unlock(&rio_mport_list_lock); return 0; } @@ -1386,3 +1593,4 @@ EXPORT_SYMBOL_GPL(rio_request_inb_mbox); EXPORT_SYMBOL_GPL(rio_release_inb_mbox); EXPORT_SYMBOL_GPL(rio_request_outb_mbox); EXPORT_SYMBOL_GPL(rio_release_outb_mbox); +EXPORT_SYMBOL_GPL(rio_init_mports); diff --git a/drivers/rapidio/rio.h b/drivers/rapidio/rio.h index b1af414f15e6..0afdf482517e 100644 --- a/drivers/rapidio/rio.h +++ b/drivers/rapidio/rio.h @@ -15,6 +15,7 @@ #include #define RIO_MAX_CHK_RETRY 3 +#define RIO_MPORT_ANY (-1) /* Functions internal to the RIO core code */ @@ -27,8 +28,6 @@ extern u32 rio_mport_get_efb(struct rio_mport *port, int local, u16 destid, extern int rio_mport_chk_dev_access(struct rio_mport *mport, u16 destid, u8 hopcount); extern int rio_create_sysfs_dev_files(struct rio_dev *rdev); -extern int rio_enum_mport(struct rio_mport *mport); -extern int rio_disc_mport(struct rio_mport *mport); extern int rio_std_route_add_entry(struct rio_mport *mport, u16 destid, u8 hopcount, u16 table, u16 route_destid, u8 route_port); @@ -39,10 +38,16 @@ extern int rio_std_route_clr_table(struct rio_mport *mport, u16 destid, u8 hopcount, u16 table); extern int rio_set_port_lockout(struct rio_dev *rdev, u32 pnum, int lock); extern struct rio_dev *rio_get_comptag(u32 comp_tag, struct rio_dev *from); +extern int rio_add_device(struct rio_dev *rdev); +extern void rio_switch_init(struct rio_dev *rdev, int do_enum); +extern int rio_enable_rx_tx_port(struct rio_mport *port, int local, u16 destid, + u8 hopcount, u8 port_num); +extern int rio_register_scan(int mport_id, struct rio_scan *scan_ops); +extern int rio_unregister_scan(int mport_id); +extern void rio_attach_device(struct rio_dev *rdev); /* Structures internal to the RIO core code */ extern struct device_attribute rio_dev_attrs[]; -extern spinlock_t rio_global_list_lock; extern struct rio_switch_ops __start_rio_switch_ops[]; extern struct rio_switch_ops __end_rio_switch_ops[]; diff --git a/include/linux/rio.h b/include/linux/rio.h index a3e784278667..cd3796ee7410 100644 --- a/include/linux/rio.h +++ b/include/linux/rio.h @@ -83,7 +83,6 @@ extern struct bus_type rio_bus_type; extern struct device rio_bus; -extern struct list_head rio_devices; /* list of all devices */ struct rio_mport; struct rio_dev; @@ -237,6 +236,7 @@ enum rio_phy_type { * @name: Port name string * @priv: Master port private data * @dma: DMA device associated with mport + * @nscan: RapidIO network enumeration/discovery operations */ struct rio_mport { struct list_head dbells; /* list of doorbell events */ @@ -262,6 +262,7 @@ struct rio_mport { #ifdef CONFIG_RAPIDIO_DMA_ENGINE struct dma_device dma; #endif + struct rio_scan *nscan; }; struct rio_id_table { @@ -460,6 +461,16 @@ static inline struct rio_mport *dma_to_mport(struct dma_device *ddev) } #endif /* CONFIG_RAPIDIO_DMA_ENGINE */ +/** + * struct rio_scan - RIO enumeration and discovery operations + * @enumerate: Callback to perform RapidIO fabric enumeration. + * @discover: Callback to perform RapidIO fabric discovery. + */ +struct rio_scan { + int (*enumerate)(struct rio_mport *mport); + int (*discover)(struct rio_mport *mport); +}; + /* Architecture and hardware-specific functions */ extern int rio_register_mport(struct rio_mport *); extern int rio_open_inb_mbox(struct rio_mport *, void *, int, int); diff --git a/include/linux/rio_drv.h b/include/linux/rio_drv.h index b75c05920ab5..5059994fe297 100644 --- a/include/linux/rio_drv.h +++ b/include/linux/rio_drv.h @@ -433,5 +433,6 @@ extern u16 rio_local_get_device_id(struct rio_mport *port); extern struct rio_dev *rio_get_device(u16 vid, u16 did, struct rio_dev *from); extern struct rio_dev *rio_get_asm(u16 vid, u16 did, u16 asm_vid, u16 asm_did, struct rio_dev *from); +extern int rio_init_mports(void); #endif /* LINUX_RIO_DRV_H */ -- cgit v1.2.3 From bc8fcfea18249640f2728c46d70999dcb7e4dc49 Mon Sep 17 00:00:00 2001 From: Alexandre Bounine Date: Fri, 24 May 2013 15:55:06 -0700 Subject: rapidio: add enumeration/discovery start from user space Add RapidIO enumeration/discovery start from user space. User space start allows to defer RapidIO fabric scan until the moment when all participating endpoints are initialized avoiding mandatory synchronized start of all endpoints (which may be challenging in systems with large number of RapidIO endpoints). Signed-off-by: Alexandre Bounine Cc: Matt Porter Cc: Li Yang Cc: Kumar Gala Cc: Andre van Herk Cc: Micha Nelissen Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/rapidio/rio-driver.c | 1 + drivers/rapidio/rio-scan.c | 24 ++++++++++++++++++++--- drivers/rapidio/rio-sysfs.c | 45 ++++++++++++++++++++++++++++++++++++++++++++ drivers/rapidio/rio.c | 28 +++++++++++++++++++++++++-- drivers/rapidio/rio.h | 2 ++ include/linux/rio.h | 9 +++++++-- 6 files changed, 102 insertions(+), 7 deletions(-) diff --git a/drivers/rapidio/rio-driver.c b/drivers/rapidio/rio-driver.c index 55850bb21480..a0c875563d76 100644 --- a/drivers/rapidio/rio-driver.c +++ b/drivers/rapidio/rio-driver.c @@ -207,6 +207,7 @@ struct bus_type rio_bus_type = { .name = "rapidio", .match = rio_match_bus, .dev_attrs = rio_dev_attrs, + .bus_attrs = rio_bus_attrs, .probe = rio_device_probe, .remove = rio_device_remove, }; diff --git a/drivers/rapidio/rio-scan.c b/drivers/rapidio/rio-scan.c index 7bdc67419cc3..4c15dbf81087 100644 --- a/drivers/rapidio/rio-scan.c +++ b/drivers/rapidio/rio-scan.c @@ -1134,19 +1134,30 @@ static void rio_pw_enable(struct rio_mport *port, int enable) /** * rio_enum_mport- Start enumeration through a master port * @mport: Master port to send transactions + * @flags: Enumeration control flags * * Starts the enumeration process. If somebody has enumerated our * master port device, then give up. If not and we have an active * link, then start recursive peer enumeration. Returns %0 if * enumeration succeeds or %-EBUSY if enumeration fails. */ -int rio_enum_mport(struct rio_mport *mport) +int rio_enum_mport(struct rio_mport *mport, u32 flags) { struct rio_net *net = NULL; int rc = 0; printk(KERN_INFO "RIO: enumerate master port %d, %s\n", mport->id, mport->name); + + /* + * To avoid multiple start requests (repeat enumeration is not supported + * by this method) check if enumeration/discovery was performed for this + * mport: if mport was added into the list of mports for a net exit + * with error. + */ + if (mport->nnode.next || mport->nnode.prev) + return -EBUSY; + /* If somebody else enumerated our master port device, bail. */ if (rio_enum_host(mport) < 0) { printk(KERN_INFO @@ -1236,14 +1247,16 @@ static void rio_build_route_tables(struct rio_net *net) /** * rio_disc_mport- Start discovery through a master port * @mport: Master port to send transactions + * @flags: discovery control flags * * Starts the discovery process. If we have an active link, - * then wait for the signal that enumeration is complete. + * then wait for the signal that enumeration is complete (if wait + * is allowed). * When enumeration completion is signaled, start recursive * peer discovery. Returns %0 if discovery succeeds or %-EBUSY * on failure. */ -int rio_disc_mport(struct rio_mport *mport) +int rio_disc_mport(struct rio_mport *mport, u32 flags) { struct rio_net *net = NULL; unsigned long to_end; @@ -1253,6 +1266,11 @@ int rio_disc_mport(struct rio_mport *mport) /* If master port has an active link, allocate net and discover peers */ if (rio_mport_is_active(mport)) { + if (rio_enum_complete(mport)) + goto enum_done; + else if (flags & RIO_SCAN_ENUM_NO_WAIT) + return -EAGAIN; + pr_debug("RIO: wait for enumeration to complete...\n"); to_end = jiffies + CONFIG_RAPIDIO_DISC_TIMEOUT * HZ; diff --git a/drivers/rapidio/rio-sysfs.c b/drivers/rapidio/rio-sysfs.c index 4dbe360989be..66d4acd5e18f 100644 --- a/drivers/rapidio/rio-sysfs.c +++ b/drivers/rapidio/rio-sysfs.c @@ -285,3 +285,48 @@ void rio_remove_sysfs_dev_files(struct rio_dev *rdev) rdev->rswitch->sw_sysfs(rdev, RIO_SW_SYSFS_REMOVE); } } + +static ssize_t bus_scan_store(struct bus_type *bus, const char *buf, + size_t count) +{ + long val; + struct rio_mport *port = NULL; + int rc; + + if (kstrtol(buf, 0, &val) < 0) + return -EINVAL; + + if (val == RIO_MPORT_ANY) { + rc = rio_init_mports(); + goto exit; + } + + if (val < 0 || val >= RIO_MAX_MPORTS) + return -EINVAL; + + port = rio_find_mport((int)val); + + if (!port) { + pr_debug("RIO: %s: mport_%d not available\n", + __func__, (int)val); + return -EINVAL; + } + + if (!port->nscan) + return -EINVAL; + + if (port->host_deviceid >= 0) + rc = port->nscan->enumerate(port, 0); + else + rc = port->nscan->discover(port, RIO_SCAN_ENUM_NO_WAIT); +exit: + if (!rc) + rc = count; + + return rc; +} + +struct bus_attribute rio_bus_attrs[] = { + __ATTR(scan, (S_IWUSR|S_IWGRP), NULL, bus_scan_store), + __ATTR_NULL +}; diff --git a/drivers/rapidio/rio.c b/drivers/rapidio/rio.c index 6e75dda34799..cb1c08996fbb 100644 --- a/drivers/rapidio/rio.c +++ b/drivers/rapidio/rio.c @@ -1382,6 +1382,30 @@ EXPORT_SYMBOL_GPL(rio_dma_prep_slave_sg); #endif /* CONFIG_RAPIDIO_DMA_ENGINE */ +/** + * rio_find_mport - find RIO mport by its ID + * @mport_id: number (ID) of mport device + * + * Given a RIO mport number, the desired mport is located + * in the global list of mports. If the mport is found, a pointer to its + * data structure is returned. If no mport is found, %NULL is returned. + */ +struct rio_mport *rio_find_mport(int mport_id) +{ + struct rio_mport *port; + + mutex_lock(&rio_mport_list_lock); + list_for_each_entry(port, &rio_mports, node) { + if (port->id == mport_id) + goto found; + } + port = NULL; +found: + mutex_unlock(&rio_mport_list_lock); + + return port; +} + /** * rio_register_scan - enumeration/discovery method registration interface * @mport_id: mport device ID for which fabric scan routine has to be set @@ -1475,7 +1499,7 @@ static void disc_work_handler(struct work_struct *_work) work = container_of(_work, struct rio_disc_work, work); pr_debug("RIO: discovery work for mport %d %s\n", work->mport->id, work->mport->name); - work->mport->nscan->discover(work->mport); + work->mport->nscan->discover(work->mport, 0); } int rio_init_mports(void) @@ -1495,7 +1519,7 @@ int rio_init_mports(void) list_for_each_entry(port, &rio_mports, node) { if (port->host_deviceid >= 0) { if (port->nscan) - port->nscan->enumerate(port); + port->nscan->enumerate(port, 0); } else n++; } diff --git a/drivers/rapidio/rio.h b/drivers/rapidio/rio.h index 0afdf482517e..c14f864dea5c 100644 --- a/drivers/rapidio/rio.h +++ b/drivers/rapidio/rio.h @@ -45,9 +45,11 @@ extern int rio_enable_rx_tx_port(struct rio_mport *port, int local, u16 destid, extern int rio_register_scan(int mport_id, struct rio_scan *scan_ops); extern int rio_unregister_scan(int mport_id); extern void rio_attach_device(struct rio_dev *rdev); +extern struct rio_mport *rio_find_mport(int mport_id); /* Structures internal to the RIO core code */ extern struct device_attribute rio_dev_attrs[]; +extern struct bus_attribute rio_bus_attrs[]; extern struct rio_switch_ops __start_rio_switch_ops[]; extern struct rio_switch_ops __end_rio_switch_ops[]; diff --git a/include/linux/rio.h b/include/linux/rio.h index cd3796ee7410..18e099342e6f 100644 --- a/include/linux/rio.h +++ b/include/linux/rio.h @@ -265,6 +265,11 @@ struct rio_mport { struct rio_scan *nscan; }; +/* + * Enumeration/discovery control flags + */ +#define RIO_SCAN_ENUM_NO_WAIT 0x00000001 /* Do not wait for enum completed */ + struct rio_id_table { u16 start; /* logical minimal id */ u32 max; /* max number of IDs in table */ @@ -467,8 +472,8 @@ static inline struct rio_mport *dma_to_mport(struct dma_device *ddev) * @discover: Callback to perform RapidIO fabric discovery. */ struct rio_scan { - int (*enumerate)(struct rio_mport *mport); - int (*discover)(struct rio_mport *mport); + int (*enumerate)(struct rio_mport *mport, u32 flags); + int (*discover)(struct rio_mport *mport, u32 flags); }; /* Architecture and hardware-specific functions */ -- cgit v1.2.3 From 5eeb929390de7d5219483a1ca10cce4a84066099 Mon Sep 17 00:00:00 2001 From: Alexandre Bounine Date: Fri, 24 May 2013 15:55:07 -0700 Subject: rapidio: documentation update for enumeration changes Update RapidIO documentation to reflect changes made to enumeration/discovery build configuration and user space triggering mechanism. Signed-off-by: Alexandre Bounine Cc: Matt Porter Cc: Li Yang Cc: Kumar Gala Cc: Andre van Herk Cc: Micha Nelissen Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/rapidio/rapidio.txt | 128 ++++++++++++++++++++++++++++++++++---- Documentation/rapidio/sysfs.txt | 17 +++++ 2 files changed, 134 insertions(+), 11 deletions(-) diff --git a/Documentation/rapidio/rapidio.txt b/Documentation/rapidio/rapidio.txt index c75694b35d08..a9c16c979da2 100644 --- a/Documentation/rapidio/rapidio.txt +++ b/Documentation/rapidio/rapidio.txt @@ -79,20 +79,63 @@ master port that is used to communicate with devices within the network. In order to initialize the RapidIO subsystem, a platform must initialize and register at least one master port within the RapidIO network. To register mport within the subsystem controller driver initialization code calls function -rio_register_mport() for each available master port. After all active master -ports are registered with a RapidIO subsystem, the rio_init_mports() routine -is called to perform enumeration and discovery. +rio_register_mport() for each available master port. -In the current PowerPC-based implementation a subsys_initcall() is specified to -perform controller initialization and mport registration. At the end it directly -calls rio_init_mports() to execute RapidIO enumeration and discovery. +RapidIO subsystem uses subsys_initcall() or device_initcall() to perform +controller initialization (depending on controller device type). + +After all active master ports are registered with a RapidIO subsystem, +an enumeration and/or discovery routine may be called automatically or +by user-space command. 4. Enumeration and Discovery ---------------------------- -When rio_init_mports() is called it scans a list of registered master ports and -calls an enumeration or discovery routine depending on the configured role of a -master port: host or agent. +4.1 Overview +------------ + +RapidIO subsystem configuration options allow users to specify enumeration and +discovery methods as statically linked components or loadable modules. +An enumeration/discovery method implementation and available input parameters +define how any given method can be attached to available RapidIO mports: +simply to all available mports OR individually to the specified mport device. + +Depending on selected enumeration/discovery build configuration, there are +several methods to initiate an enumeration and/or discovery process: + + (a) Statically linked enumeration and discovery process can be started + automatically during kernel initialization time using corresponding module + parameters. This was the original method used since introduction of RapidIO + subsystem. Now this method relies on enumerator module parameter which is + 'rio-scan.scan' for existing basic enumeration/discovery method. + When automatic start of enumeration/discovery is used a user has to ensure + that all discovering endpoints are started before the enumerating endpoint + and are waiting for enumeration to be completed. + Configuration option CONFIG_RAPIDIO_DISC_TIMEOUT defines time that discovering + endpoint waits for enumeration to be completed. If the specified timeout + expires the discovery process is terminated without obtaining RapidIO network + information. NOTE: a timed out discovery process may be restarted later using + a user-space command as it is described later if the given endpoint was + enumerated successfully. + + (b) Statically linked enumeration and discovery process can be started by + a command from user space. This initiation method provides more flexibility + for a system startup compared to the option (a) above. After all participating + endpoints have been successfully booted, an enumeration process shall be + started first by issuing a user-space command, after an enumeration is + completed a discovery process can be started on all remaining endpoints. + + (c) Modular enumeration and discovery process can be started by a command from + user space. After an enumeration/discovery module is loaded, a network scan + process can be started by issuing a user-space command. + Similar to the option (b) above, an enumerator has to be started first. + + (d) Modular enumeration and discovery process can be started by a module + initialization routine. In this case an enumerating module shall be loaded + first. + +When a network scan process is started it calls an enumeration or discovery +routine depending on the configured role of a master port: host or agent. Enumeration is performed by a master port if it is configured as a host port by assigning a host device ID greater than or equal to zero. A host device ID is @@ -104,8 +147,58 @@ for it. The enumeration and discovery routines use RapidIO maintenance transactions to access the configuration space of devices. -The enumeration process is implemented according to the enumeration algorithm -outlined in the RapidIO Interconnect Specification: Annex I [1]. +4.2 Automatic Start of Enumeration and Discovery +------------------------------------------------ + +Automatic enumeration/discovery start method is applicable only to built-in +enumeration/discovery RapidIO configuration selection. To enable automatic +enumeration/discovery start by existing basic enumerator method set use boot +command line parameter "rio-scan.scan=1". + +This configuration requires synchronized start of all RapidIO endpoints that +form a network which will be enumerated/discovered. Discovering endpoints have +to be started before an enumeration starts to ensure that all RapidIO +controllers have been initialized and are ready to be discovered. Configuration +parameter CONFIG_RAPIDIO_DISC_TIMEOUT defines time (in seconds) which +a discovering endpoint will wait for enumeration to be completed. + +When automatic enumeration/discovery start is selected, basic method's +initialization routine calls rio_init_mports() to perform enumeration or +discovery for all known mport devices. + +Depending on RapidIO network size and configuration this automatic +enumeration/discovery start method may be difficult to use due to the +requirement for synchronized start of all endpoints. + +4.3 User-space Start of Enumeration and Discovery +------------------------------------------------- + +User-space start of enumeration and discovery can be used with built-in and +modular build configurations. For user-space controlled start RapidIO subsystem +creates the sysfs write-only attribute file '/sys/bus/rapidio/scan'. To initiate +an enumeration or discovery process on specific mport device, a user needs to +write mport_ID (not RapidIO destination ID) into that file. The mport_ID is a +sequential number (0 ... RIO_MAX_MPORTS) assigned during mport device +registration. For example for machine with single RapidIO controller, mport_ID +for that controller always will be 0. + +To initiate RapidIO enumeration/discovery on all available mports a user may +write '-1' (or RIO_MPORT_ANY) into the scan attribute file. + +4.4 Basic Enumeration Method +---------------------------- + +This is an original enumeration/discovery method which is available since +first release of RapidIO subsystem code. The enumeration process is +implemented according to the enumeration algorithm outlined in the RapidIO +Interconnect Specification: Annex I [1]. + +This method can be configured as statically linked or loadable module. +The method's single parameter "scan" allows to trigger the enumeration/discovery +process from module initialization routine. + +This enumeration/discovery method can be started only once and does not support +unloading if it is built as a module. The enumeration process traverses the network using a recursive depth-first algorithm. When a new device is found, the enumerator takes ownership of that @@ -160,6 +253,19 @@ time period. If this wait time period expires before enumeration is completed, an agent skips RapidIO discovery and continues with remaining kernel initialization. +4.5 Adding New Enumeration/Discovery Method +------------------------------------------- + +RapidIO subsystem code organization allows addition of new enumeration/discovery +methods as new configuration options without significant impact to to the core +RapidIO code. + +A new enumeration/discovery method has to be attached to one or more mport +devices before an enumeration/discovery process can be started. Normally, +method's module initialization routine calls rio_register_scan() to attach +an enumerator to a specified mport device (or devices). The basic enumerator +implementation demonstrates this process. + 5. References ------------- diff --git a/Documentation/rapidio/sysfs.txt b/Documentation/rapidio/sysfs.txt index 97f71ce575d6..19878179da4c 100644 --- a/Documentation/rapidio/sysfs.txt +++ b/Documentation/rapidio/sysfs.txt @@ -88,3 +88,20 @@ that exports additional attributes. IDT_GEN2: errlog - reads contents of device error log until it is empty. + + +5. RapidIO Bus Attributes +------------------------- + +RapidIO bus subdirectory /sys/bus/rapidio implements the following bus-specific +attribute: + + scan - allows to trigger enumeration discovery process from user space. This + is a write-only attribute. To initiate an enumeration or discovery + process on specific mport device, a user needs to write mport_ID (not + RapidIO destination ID) into this file. The mport_ID is a sequential + number (0 ... RIO_MAX_MPORTS) assigned to the mport device. + For example, for a machine with a single RapidIO controller, mport_ID + for that controller always will be 0. + To initiate RapidIO enumeration/discovery on all available mports + a user must write '-1' (or RIO_MPORT_ANY) into this attribute file. -- cgit v1.2.3 From 7b92d03c3239f43e5b86c9cc9630f026d36ee995 Mon Sep 17 00:00:00 2001 From: OGAWA Hirofumi Date: Fri, 24 May 2013 15:55:08 -0700 Subject: fat: fix possible overflow for fat_clusters Intermediate value of fat_clusters can be overflowed on 32bits arch. Reported-by: Krzysztof Strasburger Signed-off-by: OGAWA Hirofumi Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/fat/inode.c | 15 ++++++++++++++- 1 file changed, 14 insertions(+), 1 deletion(-) diff --git a/fs/fat/inode.c b/fs/fat/inode.c index dfce656ddb33..5d4513cb1b3c 100644 --- a/fs/fat/inode.c +++ b/fs/fat/inode.c @@ -1229,6 +1229,19 @@ static int fat_read_root(struct inode *inode) return 0; } +static unsigned long calc_fat_clusters(struct super_block *sb) +{ + struct msdos_sb_info *sbi = MSDOS_SB(sb); + + /* Divide first to avoid overflow */ + if (sbi->fat_bits != 12) { + unsigned long ent_per_sec = sb->s_blocksize * 8 / sbi->fat_bits; + return ent_per_sec * sbi->fat_length; + } + + return sbi->fat_length * sb->s_blocksize * 8 / sbi->fat_bits; +} + /* * Read the super block of an MS-DOS FS. */ @@ -1434,7 +1447,7 @@ int fat_fill_super(struct super_block *sb, void *data, int silent, int isvfat, sbi->dirty = b->fat16.state & FAT_STATE_DIRTY; /* check that FAT table does not overflow */ - fat_clusters = sbi->fat_length * sb->s_blocksize * 8 / sbi->fat_bits; + fat_clusters = calc_fat_clusters(sb); total_clusters = min(total_clusters, fat_clusters - FAT_START_ENT); if (total_clusters > MAX_FAT(sb)) { if (!silent) -- cgit v1.2.3 From 4c663cfc523a88d97a8309b04a089c27dc57fd7e Mon Sep 17 00:00:00 2001 From: Imre Deak Date: Fri, 24 May 2013 15:55:09 -0700 Subject: wait: fix false timeouts when using wait_event_timeout() Many callers of the wait_event_timeout() and wait_event_interruptible_timeout() expect that the return value will be positive if the specified condition becomes true before the timeout elapses. However, at the moment this isn't guaranteed. If the wake-up handler is delayed enough, the time remaining until timeout will be calculated as 0 - and passed back as a return value - even if the condition became true before the timeout has passed. Fix this by returning at least 1 if the condition becomes true. This semantic is in line with what wait_for_condition_timeout() does; see commit bb10ed09 ("sched: fix wait_for_completion_timeout() spurious failure under heavy load"). Daniel said "We have 3 instances of this bug in drm/i915. One case even where we switch between the interruptible and not interruptible wait_event_timeout variants, foolishly presuming they have the same semantics. I very much like this." One such bug is reported at https://bugs.freedesktop.org/show_bug.cgi?id=64133 Signed-off-by: Imre Deak Acked-by: Daniel Vetter Acked-by: David Howells Acked-by: Jens Axboe Cc: "Paul E. McKenney" Cc: Dave Jones Cc: Lukas Czerner Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/wait.h | 16 +++++++++++----- 1 file changed, 11 insertions(+), 5 deletions(-) diff --git a/include/linux/wait.h b/include/linux/wait.h index ac38be2692d8..1133695eb067 100644 --- a/include/linux/wait.h +++ b/include/linux/wait.h @@ -217,6 +217,8 @@ do { \ if (!ret) \ break; \ } \ + if (!ret && (condition)) \ + ret = 1; \ finish_wait(&wq, &__wait); \ } while (0) @@ -233,8 +235,9 @@ do { \ * wake_up() has to be called after changing any variable that could * change the result of the wait condition. * - * The function returns 0 if the @timeout elapsed, and the remaining - * jiffies if the condition evaluated to true before the timeout elapsed. + * The function returns 0 if the @timeout elapsed, or the remaining + * jiffies (at least 1) if the @condition evaluated to %true before + * the @timeout elapsed. */ #define wait_event_timeout(wq, condition, timeout) \ ({ \ @@ -302,6 +305,8 @@ do { \ ret = -ERESTARTSYS; \ break; \ } \ + if (!ret && (condition)) \ + ret = 1; \ finish_wait(&wq, &__wait); \ } while (0) @@ -318,9 +323,10 @@ do { \ * wake_up() has to be called after changing any variable that could * change the result of the wait condition. * - * The function returns 0 if the @timeout elapsed, -ERESTARTSYS if it - * was interrupted by a signal, and the remaining jiffies otherwise - * if the condition evaluated to true before the timeout elapsed. + * Returns: + * 0 if the @timeout elapsed, -%ERESTARTSYS if it was interrupted by + * a signal, or the remaining jiffies (at least 1) if the @condition + * evaluated to %true before the @timeout elapsed. */ #define wait_event_interruptible_timeout(wq, condition, timeout) \ ({ \ -- cgit v1.2.3 From d34883d4e35c0a994e91dd847a82b4c9e0c31d83 Mon Sep 17 00:00:00 2001 From: Xiao Guangrong Date: Fri, 24 May 2013 15:55:11 -0700 Subject: mm: mmu_notifier: re-fix freed page still mapped in secondary MMU Commit 751efd8610d3 ("mmu_notifier_unregister NULL Pointer deref and multiple ->release()") breaks the fix 3ad3d901bbcf ("mm: mmu_notifier: fix freed page still mapped in secondary MMU"). Since hlist_for_each_entry_rcu() is changed now, we can not revert that patch directly, so this patch reverts the commit and simply fix the bug spotted by that patch This bug spotted by commit 751efd8610d3 is: There is a race condition between mmu_notifier_unregister() and __mmu_notifier_release(). Assume two tasks, one calling mmu_notifier_unregister() as a result of a filp_close() ->flush() callout (task A), and the other calling mmu_notifier_release() from an mmput() (task B). A B t1 srcu_read_lock() t2 if (!hlist_unhashed()) t3 srcu_read_unlock() t4 srcu_read_lock() t5 hlist_del_init_rcu() t6 synchronize_srcu() t7 srcu_read_unlock() t8 hlist_del_rcu() <--- NULL pointer deref. This can be fixed by using hlist_del_init_rcu instead of hlist_del_rcu. The another issue spotted in the commit is "multiple ->release() callouts", we needn't care it too much because it is really rare (e.g, can not happen on kvm since mmu-notify is unregistered after exit_mmap()) and the later call of multiple ->release should be fast since all the pages have already been released by the first call. Anyway, this issue should be fixed in a separate patch. -stable suggestions: Any version that has commit 751efd8610d3 need to be backported. I find the oldest version has this commit is 3.0-stable. [akpm@linux-foundation.org: tweak comments] Signed-off-by: Xiao Guangrong Tested-by: Robin Holt Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/mmu_notifier.c | 79 +++++++++++++++++++++++++++---------------------------- 1 file changed, 39 insertions(+), 40 deletions(-) diff --git a/mm/mmu_notifier.c b/mm/mmu_notifier.c index be04122fb277..6725ff183374 100644 --- a/mm/mmu_notifier.c +++ b/mm/mmu_notifier.c @@ -40,48 +40,44 @@ void __mmu_notifier_release(struct mm_struct *mm) int id; /* - * srcu_read_lock() here will block synchronize_srcu() in - * mmu_notifier_unregister() until all registered - * ->release() callouts this function makes have - * returned. + * SRCU here will block mmu_notifier_unregister until + * ->release returns. */ id = srcu_read_lock(&srcu); + hlist_for_each_entry_rcu(mn, &mm->mmu_notifier_mm->list, hlist) + /* + * If ->release runs before mmu_notifier_unregister it must be + * handled, as it's the only way for the driver to flush all + * existing sptes and stop the driver from establishing any more + * sptes before all the pages in the mm are freed. + */ + if (mn->ops->release) + mn->ops->release(mn, mm); + srcu_read_unlock(&srcu, id); + spin_lock(&mm->mmu_notifier_mm->lock); while (unlikely(!hlist_empty(&mm->mmu_notifier_mm->list))) { mn = hlist_entry(mm->mmu_notifier_mm->list.first, struct mmu_notifier, hlist); - /* - * Unlink. This will prevent mmu_notifier_unregister() - * from also making the ->release() callout. + * We arrived before mmu_notifier_unregister so + * mmu_notifier_unregister will do nothing other than to wait + * for ->release to finish and for mmu_notifier_unregister to + * return. */ hlist_del_init_rcu(&mn->hlist); - spin_unlock(&mm->mmu_notifier_mm->lock); - - /* - * Clear sptes. (see 'release' description in mmu_notifier.h) - */ - if (mn->ops->release) - mn->ops->release(mn, mm); - - spin_lock(&mm->mmu_notifier_mm->lock); } spin_unlock(&mm->mmu_notifier_mm->lock); /* - * All callouts to ->release() which we have done are complete. - * Allow synchronize_srcu() in mmu_notifier_unregister() to complete - */ - srcu_read_unlock(&srcu, id); - - /* - * mmu_notifier_unregister() may have unlinked a notifier and may - * still be calling out to it. Additionally, other notifiers - * may have been active via vmtruncate() et. al. Block here - * to ensure that all notifier callouts for this mm have been - * completed and the sptes are really cleaned up before returning - * to exit_mmap(). + * synchronize_srcu here prevents mmu_notifier_release from returning to + * exit_mmap (which would proceed with freeing all pages in the mm) + * until the ->release method returns, if it was invoked by + * mmu_notifier_unregister. + * + * The mmu_notifier_mm can't go away from under us because one mm_count + * is held by exit_mmap. */ synchronize_srcu(&srcu); } @@ -292,31 +288,34 @@ void mmu_notifier_unregister(struct mmu_notifier *mn, struct mm_struct *mm) { BUG_ON(atomic_read(&mm->mm_count) <= 0); - spin_lock(&mm->mmu_notifier_mm->lock); if (!hlist_unhashed(&mn->hlist)) { + /* + * SRCU here will force exit_mmap to wait for ->release to + * finish before freeing the pages. + */ int id; + id = srcu_read_lock(&srcu); /* - * Ensure we synchronize up with __mmu_notifier_release(). + * exit_mmap will block in mmu_notifier_release to guarantee + * that ->release is called before freeing the pages. */ - id = srcu_read_lock(&srcu); - - hlist_del_rcu(&mn->hlist); - spin_unlock(&mm->mmu_notifier_mm->lock); - if (mn->ops->release) mn->ops->release(mn, mm); + srcu_read_unlock(&srcu, id); + spin_lock(&mm->mmu_notifier_mm->lock); /* - * Allow __mmu_notifier_release() to complete. + * Can not use list_del_rcu() since __mmu_notifier_release + * can delete it before we hold the lock. */ - srcu_read_unlock(&srcu, id); - } else + hlist_del_init_rcu(&mn->hlist); spin_unlock(&mm->mmu_notifier_mm->lock); + } /* - * Wait for any running method to finish, including ->release() if it - * was run by __mmu_notifier_release() instead of us. + * Wait for any running method to finish, of course including + * ->release if it was run by mmu_notifier_relase instead of us. */ synchronize_srcu(&srcu); -- cgit v1.2.3 From afe1bb73f8ed588ab6268c27c5a447fe0484e48f Mon Sep 17 00:00:00 2001 From: Joseph Qi Date: Fri, 24 May 2013 15:55:12 -0700 Subject: ocfs2: unlock rw lock if inode lock failed In ocfs2_file_aio_write(), it does ocfs2_rw_lock() first and then ocfs2_inode_lock(). But if ocfs2_inode_lock() failed, it goes to out_sems without unlocking rw lock. This will cause a bug in ocfs2_lock_res_free() when testing res->l_ex_holders, which is increased in __ocfs2_cluster_lock() and decreased in __ocfs2_cluster_unlock(). Signed-off-by: Joseph Qi Cc: Joel Becker Cc: Mark Fasheh Cc: Li Zefan Cc: "Duyongfeng (B)" Acked-by: Sunil Mushran Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/ocfs2/file.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/ocfs2/file.c b/fs/ocfs2/file.c index 8a7509f9e6f5..ff54014a24ec 100644 --- a/fs/ocfs2/file.c +++ b/fs/ocfs2/file.c @@ -2288,7 +2288,7 @@ relock: ret = ocfs2_inode_lock(inode, NULL, 1); if (ret < 0) { mlog_errno(ret); - goto out_sems; + goto out; } ocfs2_inode_unlock(inode, 1); -- cgit v1.2.3 From 26549c8d36a64d9130e4c0f32412be7ba6180923 Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Fri, 24 May 2013 15:55:13 -0700 Subject: drivers/video: implement a simple framebuffer driver A simple frame-buffer describes a raw memory region that may be rendered to, with the assumption that the display hardware has already been set up to scan out from that buffer. This is useful in cases where a bootloader exists and has set up the display hardware, but a Linux driver doesn't yet exist for the display hardware. Examples use-cases include: * The built-in LCD panels on the Samsung ARM chromebook, and Tegra devices, and likely many other ARM or embedded systems. These cannot yet be supported using a full graphics driver, since the panel control should be provided by the CDF (Common Display Framework), which has been stuck in design/review for quite some time. One could support these panels using custom SoC-specific code, but there is a desire to use common infra-structure rather than having each SoC vendor invent their own code, hence the desire to wait for CDF. * Hardware for which a full graphics driver is not yet available, and the path to obtain one upstream isn't yet clear. For example, the Raspberry Pi. * Any hardware in early stages of upstreaming, before a full graphics driver has been tackled. This driver can provide a graphical boot console (even full X support) much earlier in the upstreaming process, thus making new SoC or board support more generally useful earlier. [akpm@linux-foundation.org: make simplefb_formats[] static] Signed-off-by: Stephen Warren Cc: Arnd Bergmann Acked-by: Olof Johansson Cc: Rob Clark Cc: Florian Tobias Schandinat Cc: Tomasz Figa Cc: Laurent Pinchart Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- .../bindings/video/simple-framebuffer.txt | 25 +++ drivers/video/Kconfig | 17 ++ drivers/video/Makefile | 1 + drivers/video/simplefb.c | 234 +++++++++++++++++++++ 4 files changed, 277 insertions(+) create mode 100644 Documentation/devicetree/bindings/video/simple-framebuffer.txt create mode 100644 drivers/video/simplefb.c diff --git a/Documentation/devicetree/bindings/video/simple-framebuffer.txt b/Documentation/devicetree/bindings/video/simple-framebuffer.txt new file mode 100644 index 000000000000..3ea460583111 --- /dev/null +++ b/Documentation/devicetree/bindings/video/simple-framebuffer.txt @@ -0,0 +1,25 @@ +Simple Framebuffer + +A simple frame-buffer describes a raw memory region that may be rendered to, +with the assumption that the display hardware has already been set up to scan +out from that buffer. + +Required properties: +- compatible: "simple-framebuffer" +- reg: Should contain the location and size of the framebuffer memory. +- width: The width of the framebuffer in pixels. +- height: The height of the framebuffer in pixels. +- stride: The number of bytes in each line of the framebuffer. +- format: The format of the framebuffer surface. Valid values are: + - r5g6b5 (16-bit pixels, d[15:11]=r, d[10:5]=g, d[4:0]=b). + +Example: + + framebuffer { + compatible = "simple-framebuffer"; + reg = <0x1d385000 (1600 * 1200 * 2)>; + width = <1600>; + height = <1200>; + stride = <(1600 * 2)>; + format = "r5g6b5"; + }; diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index d71d60f94fc1..62460561077e 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig @@ -2453,6 +2453,23 @@ config FB_HYPERV help This framebuffer driver supports Microsoft Hyper-V Synthetic Video. +config FB_SIMPLE + bool "Simple framebuffer support" + depends on (FB = y) && OF + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT + help + Say Y if you want support for a simple frame-buffer. + + This driver assumes that the display hardware has been initialized + before the kernel boots, and the kernel will simply render to the + pre-allocated frame buffer surface. + + Configuration re: surface address, size, and format must be provided + through device tree, or potentially plain old platform data in the + future. + source "drivers/video/omap/Kconfig" source "drivers/video/omap2/Kconfig" source "drivers/video/exynos/Kconfig" diff --git a/drivers/video/Makefile b/drivers/video/Makefile index 7234e4a959e8..e8bae8dd4804 100644 --- a/drivers/video/Makefile +++ b/drivers/video/Makefile @@ -166,6 +166,7 @@ obj-$(CONFIG_FB_MX3) += mx3fb.o obj-$(CONFIG_FB_DA8XX) += da8xx-fb.o obj-$(CONFIG_FB_MXS) += mxsfb.o obj-$(CONFIG_FB_SSD1307) += ssd1307fb.o +obj-$(CONFIG_FB_SIMPLE) += simplefb.o # the test framebuffer is last obj-$(CONFIG_FB_VIRTUAL) += vfb.o diff --git a/drivers/video/simplefb.c b/drivers/video/simplefb.c new file mode 100644 index 000000000000..e2e9e3e61b72 --- /dev/null +++ b/drivers/video/simplefb.c @@ -0,0 +1,234 @@ +/* + * Simplest possible simple frame-buffer driver, as a platform device + * + * Copyright (c) 2013, Stephen Warren + * + * Based on q40fb.c, which was: + * Copyright (C) 2001 Richard Zidlicky + * + * Also based on offb.c, which was: + * Copyright (C) 1997 Geert Uytterhoeven + * Copyright (C) 1996 Paul Mackerras + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + */ + +#include +#include +#include +#include +#include + +static struct fb_fix_screeninfo simplefb_fix = { + .id = "simple", + .type = FB_TYPE_PACKED_PIXELS, + .visual = FB_VISUAL_TRUECOLOR, + .accel = FB_ACCEL_NONE, +}; + +static struct fb_var_screeninfo simplefb_var = { + .height = -1, + .width = -1, + .activate = FB_ACTIVATE_NOW, + .vmode = FB_VMODE_NONINTERLACED, +}; + +static int simplefb_setcolreg(u_int regno, u_int red, u_int green, u_int blue, + u_int transp, struct fb_info *info) +{ + u32 *pal = info->pseudo_palette; + u32 cr = red >> (16 - info->var.red.length); + u32 cg = green >> (16 - info->var.green.length); + u32 cb = blue >> (16 - info->var.blue.length); + u32 value; + + if (regno >= 16) + return -EINVAL; + + value = (cr << info->var.red.offset) | + (cg << info->var.green.offset) | + (cb << info->var.blue.offset); + if (info->var.transp.length > 0) { + u32 mask = (1 << info->var.transp.length) - 1; + mask <<= info->var.transp.offset; + value |= mask; + } + pal[regno] = value; + + return 0; +} + +static struct fb_ops simplefb_ops = { + .owner = THIS_MODULE, + .fb_setcolreg = simplefb_setcolreg, + .fb_fillrect = cfb_fillrect, + .fb_copyarea = cfb_copyarea, + .fb_imageblit = cfb_imageblit, +}; + +struct simplefb_format { + const char *name; + u32 bits_per_pixel; + struct fb_bitfield red; + struct fb_bitfield green; + struct fb_bitfield blue; + struct fb_bitfield transp; +}; + +static struct simplefb_format simplefb_formats[] = { + { "r5g6b5", 16, {11, 5}, {5, 6}, {0, 5}, {0, 0} }, +}; + +struct simplefb_params { + u32 width; + u32 height; + u32 stride; + struct simplefb_format *format; +}; + +static int simplefb_parse_dt(struct platform_device *pdev, + struct simplefb_params *params) +{ + struct device_node *np = pdev->dev.of_node; + int ret; + const char *format; + int i; + + ret = of_property_read_u32(np, "width", ¶ms->width); + if (ret) { + dev_err(&pdev->dev, "Can't parse width property\n"); + return ret; + } + + ret = of_property_read_u32(np, "height", ¶ms->height); + if (ret) { + dev_err(&pdev->dev, "Can't parse height property\n"); + return ret; + } + + ret = of_property_read_u32(np, "stride", ¶ms->stride); + if (ret) { + dev_err(&pdev->dev, "Can't parse stride property\n"); + return ret; + } + + ret = of_property_read_string(np, "format", &format); + if (ret) { + dev_err(&pdev->dev, "Can't parse format property\n"); + return ret; + } + params->format = NULL; + for (i = 0; i < ARRAY_SIZE(simplefb_formats); i++) { + if (strcmp(format, simplefb_formats[i].name)) + continue; + params->format = &simplefb_formats[i]; + break; + } + if (!params->format) { + dev_err(&pdev->dev, "Invalid format value\n"); + return -EINVAL; + } + + return 0; +} + +static int simplefb_probe(struct platform_device *pdev) +{ + int ret; + struct simplefb_params params; + struct fb_info *info; + struct resource *mem; + + if (fb_get_options("simplefb", NULL)) + return -ENODEV; + + ret = simplefb_parse_dt(pdev, ¶ms); + if (ret) + return ret; + + mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!mem) { + dev_err(&pdev->dev, "No memory resource\n"); + return -EINVAL; + } + + info = framebuffer_alloc(sizeof(u32) * 16, &pdev->dev); + if (!info) + return -ENOMEM; + platform_set_drvdata(pdev, info); + + info->fix = simplefb_fix; + info->fix.smem_start = mem->start; + info->fix.smem_len = resource_size(mem); + info->fix.line_length = params.stride; + + info->var = simplefb_var; + info->var.xres = params.width; + info->var.yres = params.height; + info->var.xres_virtual = params.width; + info->var.yres_virtual = params.height; + info->var.bits_per_pixel = params.format->bits_per_pixel; + info->var.red = params.format->red; + info->var.green = params.format->green; + info->var.blue = params.format->blue; + info->var.transp = params.format->transp; + + info->fbops = &simplefb_ops; + info->flags = FBINFO_DEFAULT; + info->screen_base = devm_ioremap(&pdev->dev, info->fix.smem_start, + info->fix.smem_len); + if (!info->screen_base) { + framebuffer_release(info); + return -ENODEV; + } + info->pseudo_palette = (void *)(info + 1); + + ret = register_framebuffer(info); + if (ret < 0) { + dev_err(&pdev->dev, "Unable to register simplefb: %d\n", ret); + framebuffer_release(info); + return ret; + } + + dev_info(&pdev->dev, "fb%d: simplefb registered!\n", info->node); + + return 0; +} + +static int simplefb_remove(struct platform_device *pdev) +{ + struct fb_info *info = platform_get_drvdata(pdev); + + unregister_framebuffer(info); + framebuffer_release(info); + + return 0; +} + +static const struct of_device_id simplefb_of_match[] = { + { .compatible = "simple-framebuffer", }, + { }, +}; +MODULE_DEVICE_TABLE(of, simplefb_of_match); + +static struct platform_driver simplefb_driver = { + .driver = { + .name = "simple-framebuffer", + .owner = THIS_MODULE, + .of_match_table = simplefb_of_match, + }, + .probe = simplefb_probe, + .remove = simplefb_remove, +}; +module_platform_driver(simplefb_driver); + +MODULE_AUTHOR("Stephen Warren "); +MODULE_DESCRIPTION("Simple framebuffer driver"); +MODULE_LICENSE("GPL v2"); -- cgit v1.2.3 From 28ccddf7952c496df2a51ce5aee4f2a058a98bab Mon Sep 17 00:00:00 2001 From: Johannes Weiner Date: Fri, 24 May 2013 15:55:15 -0700 Subject: mm: memcg: remove incorrect VM_BUG_ON for swap cache pages in uncharge Commit 0c59b89c81ea ("mm: memcg: push down PageSwapCache check into uncharge entry functions") added a VM_BUG_ON() on PageSwapCache in the uncharge path after checking that page flag once, assuming that the state is stable in all paths, but this is not the case and the condition triggers in user environments. An uncharge after the last page table reference to the page goes away can race with reclaim adding the page to swap cache. Swap cache pages are usually uncharged when they are freed after swapout, from a path that also handles swap usage accounting and memcg lifetime management. However, since the last page table reference is gone and thus no references to the swap slot left, the swap slot will be freed shortly when reclaim attempts to write the page to disk. The whole swap accounting is not even necessary. So while the race condition for which this VM_BUG_ON was added is real and actually existed all along, there are no negative effects. Remove the VM_BUG_ON again. Reported-by: Heiko Carstens Reported-by: Lingzhu Xiang Signed-off-by: Johannes Weiner Acked-by: Hugh Dickins Acked-by: Michal Hocko Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/memcontrol.c | 14 ++++++++++++-- 1 file changed, 12 insertions(+), 2 deletions(-) diff --git a/mm/memcontrol.c b/mm/memcontrol.c index cb1c9dedf9b6..010d6c14129a 100644 --- a/mm/memcontrol.c +++ b/mm/memcontrol.c @@ -4108,8 +4108,6 @@ __mem_cgroup_uncharge_common(struct page *page, enum charge_type ctype, if (mem_cgroup_disabled()) return NULL; - VM_BUG_ON(PageSwapCache(page)); - if (PageTransHuge(page)) { nr_pages <<= compound_order(page); VM_BUG_ON(!PageTransHuge(page)); @@ -4205,6 +4203,18 @@ void mem_cgroup_uncharge_page(struct page *page) if (page_mapped(page)) return; VM_BUG_ON(page->mapping && !PageAnon(page)); + /* + * If the page is in swap cache, uncharge should be deferred + * to the swap path, which also properly accounts swap usage + * and handles memcg lifetime. + * + * Note that this check is not stable and reclaim may add the + * page to swap cache at any time after this. However, if the + * page is not in swap cache by the time page->mapcount hits + * 0, there won't be any page table references to the swap + * slot, and reclaim will free it and not actually write the + * page to disk. + */ if (PageSwapCache(page)) return; __mem_cgroup_uncharge_common(page, MEM_CGROUP_CHARGE_TYPE_ANON, false); -- cgit v1.2.3 From fb09c3733a94b5f1dba50359d09c9e217c763fb9 Mon Sep 17 00:00:00 2001 From: Jeff Mahoney Date: Fri, 24 May 2013 15:55:16 -0700 Subject: hfs: avoid crash in hfs_bnode_create Commit 634725a92938 ("hfs: cleanup HFS+ prints") removed the BUG_ON in hfs_bnode_create in hfsplus. This patch removes it from the hfs version and avoids an fsfuzzer crash. Signed-off-by: Jeff Mahoney Acked-by: Jeff Mahoney Signed-off-by: Jiri Slaby Cc: Vyacheslav Dubeyko Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/hfs/bnode.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/fs/hfs/bnode.c b/fs/hfs/bnode.c index f3b1a15ccd59..d3fa6bd9503e 100644 --- a/fs/hfs/bnode.c +++ b/fs/hfs/bnode.c @@ -415,7 +415,11 @@ struct hfs_bnode *hfs_bnode_create(struct hfs_btree *tree, u32 num) spin_lock(&tree->hash_lock); node = hfs_bnode_findhash(tree, num); spin_unlock(&tree->hash_lock); - BUG_ON(node); + if (node) { + pr_crit("new node %u already hashed?\n", num); + WARN_ON(1); + return node; + } node = __hfs_bnode_create(tree, num); if (!node) return ERR_PTR(-ENOMEM); -- cgit v1.2.3 From 1ccc819da6fda9bee10ab8b72e9adbb5ad3e4959 Mon Sep 17 00:00:00 2001 From: Alexandre Bounine Date: Fri, 24 May 2013 15:55:17 -0700 Subject: rapidio/tsi721: fix bug in MSI interrupt handling Fix bug in MSI interrupt handling which causes loss of event notifications. Typical indication of lost MSI interrupts are stalled message and doorbell transfers between RapidIO endpoints. To avoid loss of MSI interrupts all interrupts from the device must be disabled on entering the interrupt handler routine and re-enabled when exiting it. Re-enabling device interrupts will trigger new MSI message(s) if Tsi721 registered new events since entering interrupt handler routine. This patch is applicable to kernel versions starting from v3.2. Signed-off-by: Alexandre Bounine Cc: Matt Porter Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/rapidio/devices/tsi721.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/drivers/rapidio/devices/tsi721.c b/drivers/rapidio/devices/tsi721.c index 6faba406b6e9..a8b2c23a7ef4 100644 --- a/drivers/rapidio/devices/tsi721.c +++ b/drivers/rapidio/devices/tsi721.c @@ -471,6 +471,10 @@ static irqreturn_t tsi721_irqhandler(int irq, void *ptr) u32 intval; u32 ch_inte; + /* For MSI mode disable all device-level interrupts */ + if (priv->flags & TSI721_USING_MSI) + iowrite32(0, priv->regs + TSI721_DEV_INTE); + dev_int = ioread32(priv->regs + TSI721_DEV_INT); if (!dev_int) return IRQ_NONE; @@ -560,6 +564,14 @@ static irqreturn_t tsi721_irqhandler(int irq, void *ptr) } } #endif + + /* For MSI mode re-enable device-level interrupts */ + if (priv->flags & TSI721_USING_MSI) { + dev_int = TSI721_DEV_INT_SR2PC_CH | TSI721_DEV_INT_SRIO | + TSI721_DEV_INT_SMSG_CH | TSI721_DEV_INT_BDMA_CH; + iowrite32(dev_int, priv->regs + TSI721_DEV_INTE); + } + return IRQ_HANDLED; } -- cgit v1.2.3 From c2cc499c5bcf9040a738f49e8051b42078205748 Mon Sep 17 00:00:00 2001 From: Leonid Yegoshin Date: Fri, 24 May 2013 15:55:18 -0700 Subject: mm compaction: fix of improper cache flush in migration code Page 'new' during MIGRATION can't be flushed with flush_cache_page(). Using flush_cache_page(vma, addr, pfn) is justified only if the page is already placed in process page table, and that is done right after flush_cache_page(). But without it the arch function has no knowledge of process PTE and does nothing. Besides that, flush_cache_page() flushes an application cache page, but the kernel has a different page virtual address and dirtied it. Replace it with flush_dcache_page(new) which is the proper usage. The old page is flushed in try_to_unmap_one() before migration. This bug takes place in Sead3 board with M14Kc MIPS CPU without cache aliasing (but Harvard arch - separate I and D cache) in tight memory environment (128MB) each 1-3days on SOAK test. It fails in cc1 during kernel build (SIGILL, SIGBUS, SIGSEG) if CONFIG_COMPACTION is switched ON. Signed-off-by: Leonid Yegoshin Cc: Leonid Yegoshin Acked-by: Rik van Riel Cc: Michal Hocko Acked-by: Mel Gorman Cc: Ralf Baechle Cc: Russell King Cc: David Miller Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/migrate.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/mm/migrate.c b/mm/migrate.c index 27ed22579fd9..b1f57501de9c 100644 --- a/mm/migrate.c +++ b/mm/migrate.c @@ -165,7 +165,7 @@ static int remove_migration_pte(struct page *new, struct vm_area_struct *vma, pte = arch_make_huge_pte(pte, vma, new, 0); } #endif - flush_cache_page(vma, addr, pte_pfn(pte)); + flush_dcache_page(new); set_pte_at(mm, addr, ptep, pte); if (PageHuge(new)) { -- cgit v1.2.3 From 7450231fb35492951e78a91b833fd935171f4e66 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Fri, 24 May 2013 15:55:20 -0700 Subject: linux/kernel.h: fix kernel-doc warning Fix kernel-doc warning in : Warning(include/linux/kernel.h:590): No description found for parameter 'ip' scripts/kernel-doc cannot handle macros, functions, or function prototypes between the function or macro that is being documented and its definition, so move these prototypes above the function that is being documented. Signed-off-by: Randy Dunlap Cc: Steven Rostedt Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/kernel.h | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/include/linux/kernel.h b/include/linux/kernel.h index e96329ceb28c..e9ef6d6b51d5 100644 --- a/include/linux/kernel.h +++ b/include/linux/kernel.h @@ -562,6 +562,9 @@ int __trace_bprintk(unsigned long ip, const char *fmt, ...); extern __printf(2, 3) int __trace_printk(unsigned long ip, const char *fmt, ...); +extern int __trace_bputs(unsigned long ip, const char *str); +extern int __trace_puts(unsigned long ip, const char *str, int size); + /** * trace_puts - write a string into the ftrace buffer * @str: the string to record @@ -587,8 +590,6 @@ int __trace_printk(unsigned long ip, const char *fmt, ...); * (1 when __trace_bputs is used, strlen(str) when __trace_puts is used) */ -extern int __trace_bputs(unsigned long ip, const char *str); -extern int __trace_puts(unsigned long ip, const char *str, int size); #define trace_puts(str) ({ \ static const char *trace_printk_fmt \ __attribute__((section("__trace_printk_fmt"))) = \ -- cgit v1.2.3 From 7c3425123ddfdc5f48e7913ff59d908789712b18 Mon Sep 17 00:00:00 2001 From: "Aneesh Kumar K.V" Date: Fri, 24 May 2013 15:55:21 -0700 Subject: mm/THP: use pmd_populate() to update the pmd with pgtable_t pointer We should not use set_pmd_at to update pmd_t with pgtable_t pointer. set_pmd_at is used to set pmd with huge pte entries and architectures like ppc64, clear few flags from the pte when saving a new entry. Without this change we observe bad pte errors like below on ppc64 with THP enabled. BUG: Bad page map in process ld mm=0xc000001ee39f4780 pte:7fc3f37848000001 pmd:c000001ec0000000 Signed-off-by: Aneesh Kumar K.V Cc: Hugh Dickins Cc: Benjamin Herrenschmidt Reviewed-by: Andrea Arcangeli Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/huge_memory.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/mm/huge_memory.c b/mm/huge_memory.c index 03a89a2f464b..362c329b83fe 100644 --- a/mm/huge_memory.c +++ b/mm/huge_memory.c @@ -2325,7 +2325,12 @@ static void collapse_huge_page(struct mm_struct *mm, pte_unmap(pte); spin_lock(&mm->page_table_lock); BUG_ON(!pmd_none(*pmd)); - set_pmd_at(mm, address, pmd, _pmd); + /* + * We can only use set_pmd_at when establishing + * hugepmds and never for establishing regular pmds that + * points to regular pagetables. Use pmd_populate for that + */ + pmd_populate(mm, pmd, pmd_pgtable(_pmd)); spin_unlock(&mm->page_table_lock); anon_vma_unlock_write(vma->anon_vma); goto out; -- cgit v1.2.3 From 4b949b8af12e24b8a48fa5bb775a13b558d9f4da Mon Sep 17 00:00:00 2001 From: Christian Gmeiner Date: Fri, 24 May 2013 15:55:22 -0700 Subject: drivers/leds/leds-ot200.c: fix error caused by shifted mask During the development of this driver an in-house register documentation was used. The last week some integration tests were done and this problem was found. It turned out that the released register documentation is wrong. The fix is very simple: shift all masks by one. Signed-off-by: Christian Gmeiner Cc: Bryan Wu Cc: Sebastian Andrzej Siewior Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/leds/leds-ot200.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/drivers/leds/leds-ot200.c b/drivers/leds/leds-ot200.c index ee14662ed5ce..98cae529373f 100644 --- a/drivers/leds/leds-ot200.c +++ b/drivers/leds/leds-ot200.c @@ -47,37 +47,37 @@ static struct ot200_led leds[] = { { .name = "led_1", .port = 0x49, - .mask = BIT(7), + .mask = BIT(6), }, { .name = "led_2", .port = 0x49, - .mask = BIT(6), + .mask = BIT(5), }, { .name = "led_3", .port = 0x49, - .mask = BIT(5), + .mask = BIT(4), }, { .name = "led_4", .port = 0x49, - .mask = BIT(4), + .mask = BIT(3), }, { .name = "led_5", .port = 0x49, - .mask = BIT(3), + .mask = BIT(2), }, { .name = "led_6", .port = 0x49, - .mask = BIT(2), + .mask = BIT(1), }, { .name = "led_7", .port = 0x49, - .mask = BIT(1), + .mask = BIT(0), } }; -- cgit v1.2.3 From 97c9266b11967e6401866b0111af59fa894180bf Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Fri, 24 May 2013 15:55:23 -0700 Subject: revert "selftest: add simple test for soft-dirty bit" Revert commit 58c7be84fec8 ("selftest: add simple test for soft-dirty bit"). This is the self test for Pavel's pagemap2 patches which didn't actually get merged. Reported-by: Pavel Emelyanov Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- tools/testing/selftests/Makefile | 1 - tools/testing/selftests/soft-dirty/Makefile | 10 --- tools/testing/selftests/soft-dirty/soft-dirty.c | 114 ------------------------ 3 files changed, 125 deletions(-) delete mode 100644 tools/testing/selftests/soft-dirty/Makefile delete mode 100644 tools/testing/selftests/soft-dirty/soft-dirty.c diff --git a/tools/testing/selftests/Makefile b/tools/testing/selftests/Makefile index d4abc59ce1d9..0a63658065f0 100644 --- a/tools/testing/selftests/Makefile +++ b/tools/testing/selftests/Makefile @@ -6,7 +6,6 @@ TARGETS += memory-hotplug TARGETS += mqueue TARGETS += net TARGETS += ptrace -TARGETS += soft-dirty TARGETS += vm all: diff --git a/tools/testing/selftests/soft-dirty/Makefile b/tools/testing/selftests/soft-dirty/Makefile deleted file mode 100644 index a9cdc823d6e0..000000000000 --- a/tools/testing/selftests/soft-dirty/Makefile +++ /dev/null @@ -1,10 +0,0 @@ -CFLAGS += -iquote../../../../include/uapi -Wall -soft-dirty: soft-dirty.c - -all: soft-dirty - -clean: - rm -f soft-dirty - -run_tests: all - @./soft-dirty || echo "soft-dirty selftests: [FAIL]" diff --git a/tools/testing/selftests/soft-dirty/soft-dirty.c b/tools/testing/selftests/soft-dirty/soft-dirty.c deleted file mode 100644 index aba4f87f87f0..000000000000 --- a/tools/testing/selftests/soft-dirty/soft-dirty.c +++ /dev/null @@ -1,114 +0,0 @@ -#include -#include -#include -#include -#include -#include - -typedef unsigned long long u64; - -#define PME_PRESENT (1ULL << 63) -#define PME_SOFT_DIRTY (1Ull << 55) - -#define PAGES_TO_TEST 3 -#ifndef PAGE_SIZE -#define PAGE_SIZE 4096 -#endif - -static void get_pagemap2(char *mem, u64 *map) -{ - int fd; - - fd = open("/proc/self/pagemap2", O_RDONLY); - if (fd < 0) { - perror("Can't open pagemap2"); - exit(1); - } - - lseek(fd, (unsigned long)mem / PAGE_SIZE * sizeof(u64), SEEK_SET); - read(fd, map, sizeof(u64) * PAGES_TO_TEST); - close(fd); -} - -static inline char map_p(u64 map) -{ - return map & PME_PRESENT ? 'p' : '-'; -} - -static inline char map_sd(u64 map) -{ - return map & PME_SOFT_DIRTY ? 'd' : '-'; -} - -static int check_pte(int step, int page, u64 *map, u64 want) -{ - if ((map[page] & want) != want) { - printf("Step %d Page %d has %c%c, want %c%c\n", - step, page, - map_p(map[page]), map_sd(map[page]), - map_p(want), map_sd(want)); - return 1; - } - - return 0; -} - -static void clear_refs(void) -{ - int fd; - char *v = "4"; - - fd = open("/proc/self/clear_refs", O_WRONLY); - if (write(fd, v, 3) < 3) { - perror("Can't clear soft-dirty bit"); - exit(1); - } - close(fd); -} - -int main(void) -{ - char *mem, x; - u64 map[PAGES_TO_TEST]; - - mem = mmap(NULL, PAGES_TO_TEST * PAGE_SIZE, - PROT_READ | PROT_WRITE, MAP_PRIVATE | MAP_ANON, 0, 0); - - x = mem[0]; - mem[2 * PAGE_SIZE] = 'c'; - get_pagemap2(mem, map); - - if (check_pte(1, 0, map, PME_PRESENT)) - return 1; - if (check_pte(1, 1, map, 0)) - return 1; - if (check_pte(1, 2, map, PME_PRESENT | PME_SOFT_DIRTY)) - return 1; - - clear_refs(); - get_pagemap2(mem, map); - - if (check_pte(2, 0, map, PME_PRESENT)) - return 1; - if (check_pte(2, 1, map, 0)) - return 1; - if (check_pte(2, 2, map, PME_PRESENT)) - return 1; - - mem[0] = 'a'; - mem[PAGE_SIZE] = 'b'; - x = mem[2 * PAGE_SIZE]; - get_pagemap2(mem, map); - - if (check_pte(3, 0, map, PME_PRESENT | PME_SOFT_DIRTY)) - return 1; - if (check_pte(3, 1, map, PME_PRESENT | PME_SOFT_DIRTY)) - return 1; - if (check_pte(3, 2, map, PME_PRESENT)) - return 1; - - (void)x; /* gcc warn */ - - printf("PASS\n"); - return 0; -} -- cgit v1.2.3 From 6900807c6b95dcb004902302b8ac5dbfbf6feb89 Mon Sep 17 00:00:00 2001 From: Jeff Moyer Date: Fri, 24 May 2013 15:55:24 -0700 Subject: aio: fix io_getevents documentation In reviewing man pages, I noticed that io_getevents is documented to update the timeout that gets passed into the library call. This doesn't happen in kernel space or in the library (even though it's documented to do so in both places). Unless there is objection, I'd like to fix the comments/docs to match the code (I will also update the man page upon consensus). Signed-off-by: Jeff Moyer Signed-off-by: Benjamin LaHaise Acked-by: Cyril Hrubis Acked-by: Michael Kerrisk Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/aio.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/fs/aio.c b/fs/aio.c index c5b1a8c10411..3fcdd73b6f1b 100644 --- a/fs/aio.c +++ b/fs/aio.c @@ -1299,8 +1299,7 @@ SYSCALL_DEFINE3(io_cancel, aio_context_t, ctx_id, struct iocb __user *, iocb, * < min_nr if the timeout specified by timeout has elapsed * before sufficient events are available, where timeout == NULL * specifies an infinite timeout. Note that the timeout pointed to by - * timeout is relative and will be updated if not NULL and the - * operation blocks. Will fail with -ENOSYS if not implemented. + * timeout is relative. Will fail with -ENOSYS if not implemented. */ SYSCALL_DEFINE5(io_getevents, aio_context_t, ctx_id, long, min_nr, -- cgit v1.2.3 From 387b8b3e37cb1c257fb607787f73815c30d22859 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Fri, 24 May 2013 15:55:25 -0700 Subject: auditfilter.c: fix kernel-doc warnings Fix kernel-doc warnings in kernel/auditfilter.c: Warning(kernel/auditfilter.c:1029): Excess function parameter 'loginuid' description in 'audit_receive_filter' Warning(kernel/auditfilter.c:1029): Excess function parameter 'sessionid' description in 'audit_receive_filter' Warning(kernel/auditfilter.c:1029): Excess function parameter 'sid' description in 'audit_receive_filter' Signed-off-by: Randy Dunlap Cc: Eric Paris Cc: Al Viro Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- kernel/auditfilter.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/kernel/auditfilter.c b/kernel/auditfilter.c index 83a2970295d1..6bd4a90d1991 100644 --- a/kernel/auditfilter.c +++ b/kernel/auditfilter.c @@ -1021,9 +1021,6 @@ static void audit_log_rule_change(char *action, struct audit_krule *rule, int re * @seq: netlink audit message sequence (serial) number * @data: payload data * @datasz: size of payload data - * @loginuid: loginuid of sender - * @sessionid: sessionid for netlink audit message - * @sid: SE Linux Security ID of sender */ int audit_receive_filter(int type, int pid, int seq, void *data, size_t datasz) { -- cgit v1.2.3 From cac29af6bd6bc5c53499f39ef1eade193295b2f1 Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Fri, 24 May 2013 15:55:26 -0700 Subject: drivers/rtc/rtc-pl031.c: pass correct pointer to free_irq() free_irq() expects the same pointer that was passed to request_irq(), otherwise the IRQ is not freed. The issue was found using the following coccinelle script: @r1@ type T; T devid; @@ request_irq(..., devid) @r2@ type r1.T; T devid; position p; @@ free_irq@p(..., devid) @@ position p != r2.p; @@ *free_irq@p(...) Signed-off-by: Lars-Peter Clausen Cc: Srinidhi Kasagar Cc: Linus Walleij Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/rtc/rtc-pl031.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/rtc/rtc-pl031.c b/drivers/rtc/rtc-pl031.c index 8900ea784817..0f0609b1aa2c 100644 --- a/drivers/rtc/rtc-pl031.c +++ b/drivers/rtc/rtc-pl031.c @@ -306,7 +306,7 @@ static int pl031_remove(struct amba_device *adev) struct pl031_local *ldata = dev_get_drvdata(&adev->dev); amba_set_drvdata(adev, NULL); - free_irq(adev->irq[0], ldata->rtc); + free_irq(adev->irq[0], ldata); rtc_device_unregister(ldata->rtc); iounmap(ldata->base); kfree(ldata); -- cgit v1.2.3 From e5ee7305ae03e43dbe2b0e346232975f793ad0eb Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Fri, 24 May 2013 15:55:27 -0700 Subject: fbdev: FB_GOLDFISH should depend on HAS_DMA If NO_DMA=y: drivers/built-in.o: In function `goldfish_fb_remove': drivers/video/goldfishfb.c:301: undefined reference to `dma_free_coherent' drivers/built-in.o: In function `goldfish_fb_probe': drivers/video/goldfishfb.c:247: undefined reference to `dma_alloc_coherent' drivers/video/goldfishfb.c:280: undefined reference to `dma_free_coherent' Signed-off-by: Geert Uytterhoeven Cc: Florian Tobias Schandinat Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/video/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index 62460561077e..2e937bdace6f 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig @@ -2199,7 +2199,7 @@ config FB_XILINX config FB_GOLDFISH tristate "Goldfish Framebuffer" - depends on FB + depends on FB && HAS_DMA select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT -- cgit v1.2.3 From dfd20b2b174d3a9b258ea3b7a35ead33576587b1 Mon Sep 17 00:00:00 2001 From: Brian Behlendorf Date: Fri, 24 May 2013 15:55:28 -0700 Subject: drivers/block/brd.c: fix brd_lookup_page() race The index on the page must be set before it is inserted in the radix tree. Otherwise there is a small race which can occur during lookup where the page can be found with the incorrect index. This will trigger the BUG_ON() in brd_lookup_page(). Signed-off-by: Brian Behlendorf Reported-by: Chris Wedgwood Cc: Jens Axboe Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/block/brd.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/block/brd.c b/drivers/block/brd.c index f1a29f8e9d33..9bf4371755f2 100644 --- a/drivers/block/brd.c +++ b/drivers/block/brd.c @@ -117,13 +117,13 @@ static struct page *brd_insert_page(struct brd_device *brd, sector_t sector) spin_lock(&brd->brd_lock); idx = sector >> PAGE_SECTORS_SHIFT; + page->index = idx; if (radix_tree_insert(&brd->brd_pages, idx, page)) { __free_page(page); page = radix_tree_lookup(&brd->brd_pages, idx); BUG_ON(!page); BUG_ON(page->index != idx); - } else - page->index = idx; + } spin_unlock(&brd->brd_lock); radix_tree_preload_end(); -- cgit v1.2.3 From 136e8770cd5d1fe38b3c613100dd6dc4db6d4fa6 Mon Sep 17 00:00:00 2001 From: Ryusuke Konishi Date: Fri, 24 May 2013 15:55:29 -0700 Subject: nilfs2: fix issue of nilfs_set_page_dirty() for page at EOF boundary nilfs2: fix issue of nilfs_set_page_dirty for page at EOF boundary DESCRIPTION: There are use-cases when NILFS2 file system (formatted with block size lesser than 4 KB) can be remounted in RO mode because of encountering of "broken bmap" issue. The issue was reported by Anthony Doggett : "The machine I've been trialling nilfs on is running Debian Testing, Linux version 3.2.0-4-686-pae (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.35-2), but I've also reproduced it (identically) with Debian Unstable amd64 and Debian Experimental (using the 3.8-trunk kernel). The problematic partitions were formatted with "mkfs.nilfs2 -b 1024 -B 8192"." SYMPTOMS: (1) System log contains error messages likewise: [63102.496756] nilfs_direct_assign: invalid pointer: 0 [63102.496786] NILFS error (device dm-17): nilfs_bmap_assign: broken bmap (inode number=28) [63102.496798] [63102.524403] Remounting filesystem read-only (2) The NILFS2 file system is remounted in RO mode. REPRODUSING PATH: (1) Create volume group with name "unencrypted" by means of vgcreate utility. (2) Run script (prepared by Anthony Doggett ): ----------------[BEGIN SCRIPT]-------------------- VG=unencrypted lvcreate --size 2G --name ntest $VG mkfs.nilfs2 -b 1024 -B 8192 /dev/mapper/$VG-ntest mkdir /var/tmp/n mkdir /var/tmp/n/ntest mount /dev/mapper/$VG-ntest /var/tmp/n/ntest mkdir /var/tmp/n/ntest/thedir cd /var/tmp/n/ntest/thedir sleep 2 date darcs init sleep 2 dmesg|tail -n 5 date darcs whatsnew || true date sleep 2 dmesg|tail -n 5 ----------------[END SCRIPT]-------------------- REPRODUCIBILITY: 100% INVESTIGATION: As it was discovered, the issue takes place during segment construction after executing such sequence of user-space operations: open("_darcs/index", O_RDWR|O_CREAT|O_NOCTTY, 0666) = 7 fstat(7, {st_mode=S_IFREG|0644, st_size=0, ...}) = 0 ftruncate(7, 60) The error message "NILFS error (device dm-17): nilfs_bmap_assign: broken bmap (inode number=28)" takes place because of trying to get block number for third block of the file with logical offset #3072 bytes. As it is possible to see from above output, the file has 60 bytes of the whole size. So, it is enough one block (1 KB in size) allocation for the whole file. Trying to operate with several blocks instead of one takes place because of discovering several dirty buffers for this file in nilfs_segctor_scan_file() method. The root cause of this issue is in nilfs_set_page_dirty function which is called just before writing to an mmapped page. When nilfs_page_mkwrite function handles a page at EOF boundary, it fills hole blocks only inside EOF through __block_page_mkwrite(). The __block_page_mkwrite() function calls set_page_dirty() after filling hole blocks, thus nilfs_set_page_dirty function (= a_ops->set_page_dirty) is called. However, the current implementation of nilfs_set_page_dirty() wrongly marks all buffers dirty even for page at EOF boundary. As a result, buffers outside EOF are inconsistently marked dirty and queued for write even though they are not mapped with nilfs_get_block function. FIX: This modifies nilfs_set_page_dirty() not to mark hole blocks dirty. Thanks to Vyacheslav Dubeyko for his effort on analysis and proposals for this issue. Signed-off-by: Ryusuke Konishi Reported-by: Anthony Doggett Reported-by: Vyacheslav Dubeyko Cc: Vyacheslav Dubeyko Tested-by: Ryusuke Konishi Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/nilfs2/inode.c | 27 +++++++++++++++++++++++---- 1 file changed, 23 insertions(+), 4 deletions(-) diff --git a/fs/nilfs2/inode.c b/fs/nilfs2/inode.c index 689fb608648e..bccfec8343c5 100644 --- a/fs/nilfs2/inode.c +++ b/fs/nilfs2/inode.c @@ -219,13 +219,32 @@ static int nilfs_writepage(struct page *page, struct writeback_control *wbc) static int nilfs_set_page_dirty(struct page *page) { - int ret = __set_page_dirty_buffers(page); + int ret = __set_page_dirty_nobuffers(page); - if (ret) { + if (page_has_buffers(page)) { struct inode *inode = page->mapping->host; - unsigned nr_dirty = 1 << (PAGE_SHIFT - inode->i_blkbits); + unsigned nr_dirty = 0; + struct buffer_head *bh, *head; - nilfs_set_file_dirty(inode, nr_dirty); + /* + * This page is locked by callers, and no other thread + * concurrently marks its buffers dirty since they are + * only dirtied through routines in fs/buffer.c in + * which call sites of mark_buffer_dirty are protected + * by page lock. + */ + bh = head = page_buffers(page); + do { + /* Do not mark hole blocks dirty */ + if (buffer_dirty(bh) || !buffer_mapped(bh)) + continue; + + set_buffer_dirty(bh); + nr_dirty++; + } while (bh = bh->b_this_page, bh != head); + + if (nr_dirty) + nilfs_set_file_dirty(inode, nr_dirty); } return ret; } -- cgit v1.2.3 From 348f9f05e0266822fa048f7fb3b039692a0cafbc Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Fri, 24 May 2013 15:55:30 -0700 Subject: mm/memory_hotplug.c: fix printk format warnings Fix printk format warnings in mm/memory_hotplug.c by using "%pa": mm/memory_hotplug.c: warning: format '%llx' expects argument of type 'long long unsigned int', but argument 2 has type 'resource_size_t' [-Wformat] mm/memory_hotplug.c: warning: format '%llx' expects argument of type 'long long unsigned int', but argument 3 has type 'resource_size_t' [-Wformat] Signed-off-by: Randy Dunlap Reported-by: Geert Uytterhoeven Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/memory_hotplug.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/mm/memory_hotplug.c b/mm/memory_hotplug.c index a221fac1f47d..1ad92b46753e 100644 --- a/mm/memory_hotplug.c +++ b/mm/memory_hotplug.c @@ -720,9 +720,12 @@ int __remove_pages(struct zone *zone, unsigned long phys_start_pfn, start = phys_start_pfn << PAGE_SHIFT; size = nr_pages * PAGE_SIZE; ret = release_mem_region_adjustable(&iomem_resource, start, size); - if (ret) - pr_warn("Unable to release resource <%016llx-%016llx> (%d)\n", - start, start + size - 1, ret); + if (ret) { + resource_size_t endres = start + size - 1; + + pr_warn("Unable to release resource <%pa-%pa> (%d)\n", + &start, &endres, ret); + } sections_to_remove = nr_pages / PAGES_PER_SECTION; for (i = 0; i < sections_to_remove; i++) { -- cgit v1.2.3 From 1e7e2e05c179a68aaf8830fe91547a87f4589e53 Mon Sep 17 00:00:00 2001 From: Jarod Wilson Date: Fri, 24 May 2013 15:55:31 -0700 Subject: drivers/char/random.c: fix priming of last_data Commit ec8f02da9ea5 ("random: prime last_data value per fips requirements") added priming of last_data per fips requirements. Unfortuantely, it did so in a way that can lead to multiple threads all incrementing nbytes, but only one actually doing anything with the extra data, which leads to some fun random corruption and panics. The fix is to simply do everything needed to prime last_data in a single shot, so there's no window for multiple cpus to increment nbytes -- in fact, we won't even increment or decrement nbytes anymore, we'll just extract the needed EXTRACT_SIZE one time per pool and then carry on with the normal routine. All these changes have been tested across multiple hosts and architectures where panics were previously encoutered. The code changes are are strictly limited to areas only touched when when booted in fips mode. This change should also go into 3.8-stable, to make the myriads of fips users on 3.8.x happy. Signed-off-by: Jarod Wilson Tested-by: Jan Stancek Tested-by: Jan Stodola Cc: Herbert Xu Acked-by: Neil Horman Cc: "David S. Miller" Cc: Matt Mackall Cc: "Theodore Ts'o" Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/char/random.c | 30 +++++++++++++++--------------- 1 file changed, 15 insertions(+), 15 deletions(-) diff --git a/drivers/char/random.c b/drivers/char/random.c index cd9a6211dcad..73e52b7796f9 100644 --- a/drivers/char/random.c +++ b/drivers/char/random.c @@ -957,10 +957,23 @@ static ssize_t extract_entropy(struct entropy_store *r, void *buf, { ssize_t ret = 0, i; __u8 tmp[EXTRACT_SIZE]; + unsigned long flags; /* if last_data isn't primed, we need EXTRACT_SIZE extra bytes */ - if (fips_enabled && !r->last_data_init) - nbytes += EXTRACT_SIZE; + if (fips_enabled) { + spin_lock_irqsave(&r->lock, flags); + if (!r->last_data_init) { + r->last_data_init = true; + spin_unlock_irqrestore(&r->lock, flags); + trace_extract_entropy(r->name, EXTRACT_SIZE, + r->entropy_count, _RET_IP_); + xfer_secondary_pool(r, EXTRACT_SIZE); + extract_buf(r, tmp); + spin_lock_irqsave(&r->lock, flags); + memcpy(r->last_data, tmp, EXTRACT_SIZE); + } + spin_unlock_irqrestore(&r->lock, flags); + } trace_extract_entropy(r->name, nbytes, r->entropy_count, _RET_IP_); xfer_secondary_pool(r, nbytes); @@ -970,19 +983,6 @@ static ssize_t extract_entropy(struct entropy_store *r, void *buf, extract_buf(r, tmp); if (fips_enabled) { - unsigned long flags; - - - /* prime last_data value if need be, per fips 140-2 */ - if (!r->last_data_init) { - spin_lock_irqsave(&r->lock, flags); - memcpy(r->last_data, tmp, EXTRACT_SIZE); - r->last_data_init = true; - nbytes -= EXTRACT_SIZE; - spin_unlock_irqrestore(&r->lock, flags); - extract_buf(r, tmp); - } - spin_lock_irqsave(&r->lock, flags); if (!memcmp(tmp, r->last_data, EXTRACT_SIZE)) panic("Hardware RNG duplicated output!\n"); -- cgit v1.2.3 From 10b3a32d292c21ea5b3ad5ca5975e88bb20b8d68 Mon Sep 17 00:00:00 2001 From: Jiri Kosina Date: Fri, 24 May 2013 15:55:33 -0700 Subject: random: fix accounting race condition with lockless irq entropy_count update Commit 902c098a3663 ("random: use lockless techniques in the interrupt path") turned IRQ path from being spinlock protected into lockless cmpxchg-retry update. That commit removed r->lock serialization between crediting entropy bits from IRQ context and accounting when extracting entropy on userspace read path, but didn't turn the r->entropy_count reads/updates in account() to use cmpxchg as well. It has been observed, that under certain circumstances this leads to read() on /dev/urandom to return 0 (EOF), as r->entropy_count gets corrupted and becomes negative, which in turn results in propagating 0 all the way from account() to the actual read() call. Convert the accounting code to be the proper lockless counterpart of what has been partially done by 902c098a3663. Signed-off-by: Jiri Kosina Cc: Theodore Ts'o Cc: Greg KH Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/char/random.c | 24 ++++++++++++++++-------- 1 file changed, 16 insertions(+), 8 deletions(-) diff --git a/drivers/char/random.c b/drivers/char/random.c index 73e52b7796f9..35487e8ded59 100644 --- a/drivers/char/random.c +++ b/drivers/char/random.c @@ -865,16 +865,24 @@ static size_t account(struct entropy_store *r, size_t nbytes, int min, if (r->entropy_count / 8 < min + reserved) { nbytes = 0; } else { + int entropy_count, orig; +retry: + entropy_count = orig = ACCESS_ONCE(r->entropy_count); /* If limited, never pull more than available */ - if (r->limit && nbytes + reserved >= r->entropy_count / 8) - nbytes = r->entropy_count/8 - reserved; - - if (r->entropy_count / 8 >= nbytes + reserved) - r->entropy_count -= nbytes*8; - else - r->entropy_count = reserved; + if (r->limit && nbytes + reserved >= entropy_count / 8) + nbytes = entropy_count/8 - reserved; + + if (entropy_count / 8 >= nbytes + reserved) { + entropy_count -= nbytes*8; + if (cmpxchg(&r->entropy_count, orig, entropy_count) != orig) + goto retry; + } else { + entropy_count = reserved; + if (cmpxchg(&r->entropy_count, orig, entropy_count) != orig) + goto retry; + } - if (r->entropy_count < random_write_wakeup_thresh) + if (entropy_count < random_write_wakeup_thresh) wakeup_write = 1; } -- cgit v1.2.3 From b4ca2b4b577c3530e34dcfaafccb2cc680ce95d1 Mon Sep 17 00:00:00 2001 From: Joseph Qi Date: Fri, 24 May 2013 15:55:34 -0700 Subject: ocfs2: goto out_unlock if ocfs2_get_clusters_nocache() failed in ocfs2_fiemap() Last time we found there is lock/unlock bug in ocfs2_file_aio_write, and then we did a thorough search for all lock resources in ocfs2_inode_info, including rw, inode and open lockres and found this bug. My kernel version is 3.0.13, and it is also in the lastest version 3.9. In ocfs2_fiemap, once ocfs2_get_clusters_nocache failed, it should goto out_unlock instead of out, because we need release buffer head, up read alloc sem and unlock inode. Signed-off-by: Joseph Qi Reviewed-by: Jie Liu Cc: Mark Fasheh Cc: Joel Becker Acked-by: Sunil Mushran Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/ocfs2/extent_map.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/ocfs2/extent_map.c b/fs/ocfs2/extent_map.c index 1c39efb71bab..2487116d0d33 100644 --- a/fs/ocfs2/extent_map.c +++ b/fs/ocfs2/extent_map.c @@ -790,7 +790,7 @@ int ocfs2_fiemap(struct inode *inode, struct fiemap_extent_info *fieinfo, &hole_size, &rec, &is_last); if (ret) { mlog_errno(ret); - goto out; + goto out_unlock; } if (rec.e_blkno == 0ULL) { -- cgit v1.2.3 From 43c523bff7c3b47506d536c10637be8399dfd85f Mon Sep 17 00:00:00 2001 From: Tomasz Figa Date: Fri, 24 May 2013 15:55:35 -0700 Subject: drivers/rtc/rtc-max8998.c: check for pdata presence before dereferencing Currently the driver can crash with a NULL pointer dereference if no pdata is provided, despite of successful registration of the MFD part. This patch fixes the problem by adding a NULL check before dereferencing the pdata pointer. Signed-off-by: Tomasz Figa Signed-off-by: Kyungmin Park Cc: Sachin Kamat Reviewed-by: Jingoo Han Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/rtc/rtc-max8998.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/rtc/rtc-max8998.c b/drivers/rtc/rtc-max8998.c index 48b6612fae7f..d5af7baa48b5 100644 --- a/drivers/rtc/rtc-max8998.c +++ b/drivers/rtc/rtc-max8998.c @@ -285,7 +285,7 @@ static int max8998_rtc_probe(struct platform_device *pdev) info->irq, ret); dev_info(&pdev->dev, "RTC CHIP NAME: %s\n", pdev->id_entry->name); - if (pdata->rtc_delay) { + if (pdata && pdata->rtc_delay) { info->lp3974_bug_workaround = true; dev_warn(&pdev->dev, "LP3974 with RTC REGERR option." " RTC updates will be extremely slow.\n"); -- cgit v1.2.3 From a9ff785e4437c83d2179161e012f5bdfbd6381f0 Mon Sep 17 00:00:00 2001 From: Cliff Wickman Date: Fri, 24 May 2013 15:55:36 -0700 Subject: mm/pagewalk.c: walk_page_range should avoid VM_PFNMAP areas A panic can be caused by simply cat'ing /proc//smaps while an application has a VM_PFNMAP range. It happened in-house when a benchmarker was trying to decipher the memory layout of his program. /proc//smaps and similar walks through a user page table should not be looking at VM_PFNMAP areas. Certain tests in walk_page_range() (specifically split_huge_page_pmd()) assume that all the mapped PFN's are backed with page structures. And this is not usually true for VM_PFNMAP areas. This can result in panics on kernel page faults when attempting to address those page structures. There are a half dozen callers of walk_page_range() that walk through a task's entire page table (as N. Horiguchi pointed out). So rather than change all of them, this patch changes just walk_page_range() to ignore VM_PFNMAP areas. The logic of hugetlb_vma() is moved back into walk_page_range(), as we want to test any vma in the range. VM_PFNMAP areas are used by: - graphics memory manager gpu/drm/drm_gem.c - global reference unit sgi-gru/grufile.c - sgi special memory char/mspec.c - and probably several out-of-tree modules [akpm@linux-foundation.org: remove now-unused hugetlb_vma() stub] Signed-off-by: Cliff Wickman Reviewed-by: Naoya Horiguchi Cc: Mel Gorman Cc: Andrea Arcangeli Cc: Dave Hansen Cc: David Sterba Cc: Johannes Weiner Cc: KOSAKI Motohiro Cc: "Kirill A. Shutemov" Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/pagewalk.c | 70 ++++++++++++++++++++++++++++++----------------------------- 1 file changed, 36 insertions(+), 34 deletions(-) diff --git a/mm/pagewalk.c b/mm/pagewalk.c index 35aa294656cd..5da2cbcfdbb5 100644 --- a/mm/pagewalk.c +++ b/mm/pagewalk.c @@ -127,28 +127,7 @@ static int walk_hugetlb_range(struct vm_area_struct *vma, return 0; } -static struct vm_area_struct* hugetlb_vma(unsigned long addr, struct mm_walk *walk) -{ - struct vm_area_struct *vma; - - /* We don't need vma lookup at all. */ - if (!walk->hugetlb_entry) - return NULL; - - VM_BUG_ON(!rwsem_is_locked(&walk->mm->mmap_sem)); - vma = find_vma(walk->mm, addr); - if (vma && vma->vm_start <= addr && is_vm_hugetlb_page(vma)) - return vma; - - return NULL; -} - #else /* CONFIG_HUGETLB_PAGE */ -static struct vm_area_struct* hugetlb_vma(unsigned long addr, struct mm_walk *walk) -{ - return NULL; -} - static int walk_hugetlb_range(struct vm_area_struct *vma, unsigned long addr, unsigned long end, struct mm_walk *walk) @@ -198,30 +177,53 @@ int walk_page_range(unsigned long addr, unsigned long end, if (!walk->mm) return -EINVAL; + VM_BUG_ON(!rwsem_is_locked(&walk->mm->mmap_sem)); + pgd = pgd_offset(walk->mm, addr); do { - struct vm_area_struct *vma; + struct vm_area_struct *vma = NULL; next = pgd_addr_end(addr, end); /* - * handle hugetlb vma individually because pagetable walk for - * the hugetlb page is dependent on the architecture and - * we can't handled it in the same manner as non-huge pages. + * This function was not intended to be vma based. + * But there are vma special cases to be handled: + * - hugetlb vma's + * - VM_PFNMAP vma's */ - vma = hugetlb_vma(addr, walk); + vma = find_vma(walk->mm, addr); if (vma) { - if (vma->vm_end < next) + /* + * There are no page structures backing a VM_PFNMAP + * range, so do not allow split_huge_page_pmd(). + */ + if ((vma->vm_start <= addr) && + (vma->vm_flags & VM_PFNMAP)) { next = vma->vm_end; + pgd = pgd_offset(walk->mm, next); + continue; + } /* - * Hugepage is very tightly coupled with vma, so - * walk through hugetlb entries within a given vma. + * Handle hugetlb vma individually because pagetable + * walk for the hugetlb page is dependent on the + * architecture and we can't handled it in the same + * manner as non-huge pages. */ - err = walk_hugetlb_range(vma, addr, next, walk); - if (err) - break; - pgd = pgd_offset(walk->mm, next); - continue; + if (walk->hugetlb_entry && (vma->vm_start <= addr) && + is_vm_hugetlb_page(vma)) { + if (vma->vm_end < next) + next = vma->vm_end; + /* + * Hugepage is very tightly coupled with vma, + * so walk through hugetlb entries within a + * given vma. + */ + err = walk_hugetlb_range(vma, addr, next, walk); + if (err) + break; + pgd = pgd_offset(walk->mm, next); + continue; + } } if (pgd_none_or_clear_bad(pgd)) { -- cgit v1.2.3 From 03e04f048d2774aabd126fbad84729d4ba9dc40a Mon Sep 17 00:00:00 2001 From: Benjamin LaHaise Date: Fri, 24 May 2013 15:55:38 -0700 Subject: aio: fix kioctx not being freed after cancellation at exit time The recent changes overhauling fs/aio.c introduced a bug that results in the kioctx not being freed when outstanding kiocbs are cancelled at exit_aio() time. Specifically, a kiocb that is cancelled has its completion events discarded by batch_complete_aio(), which then fails to wake up the process stuck in free_ioctx(). Fix this by modifying the wait_event() condition in free_ioctx() appropriately. This patch was tested with the cancel operation in the thread based code posted yesterday. [akpm@linux-foundation.org: fix build] Signed-off-by: Benjamin LaHaise Signed-off-by: Kent Overstreet Cc: Kent Overstreet Cc: Josh Boyer Cc: Zach Brown Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/aio.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/fs/aio.c b/fs/aio.c index 3fcdd73b6f1b..7fe5bdee1630 100644 --- a/fs/aio.c +++ b/fs/aio.c @@ -307,7 +307,9 @@ static void free_ioctx(struct kioctx *ctx) kunmap_atomic(ring); while (atomic_read(&ctx->reqs_active) > 0) { - wait_event(ctx->wait, head != ctx->tail); + wait_event(ctx->wait, + head != ctx->tail || + atomic_read(&ctx->reqs_active) <= 0); avail = (head <= ctx->tail ? ctx->tail : ctx->nr_events) - head; -- cgit v1.2.3 From 7bb66f6e6eecdd8e10ed3a63bd28c1e9105adc79 Mon Sep 17 00:00:00 2001 From: Vineet Gupta Date: Sat, 25 May 2013 14:04:25 +0530 Subject: ARC: lazy dcache flush broke gdb in non-aliasing configs gdbserver inserting a breakpoint ends up calling copy_user_page() for a code page. The generic version of which (non-aliasing config) didn't set the PG_arch_1 bit hence update_mmu_cache() didn't sync dcache/icache for corresponding dynamic loader code page - causing garbade to be executed. So now aliasing versions of copy_user_highpage()/clear_page() are made default. There is no significant overhead since all of special alias handling code is compiled out for non-aliasing build Signed-off-by: Vineet Gupta --- arch/arc/include/asm/page.h | 9 --------- arch/arc/mm/cache_arc700.c | 21 +++++++++++---------- 2 files changed, 11 insertions(+), 19 deletions(-) diff --git a/arch/arc/include/asm/page.h b/arch/arc/include/asm/page.h index 374a35514116..ab84bf131fe1 100644 --- a/arch/arc/include/asm/page.h +++ b/arch/arc/include/asm/page.h @@ -19,13 +19,6 @@ #define clear_page(paddr) memset((paddr), 0, PAGE_SIZE) #define copy_page(to, from) memcpy((to), (from), PAGE_SIZE) -#ifndef CONFIG_ARC_CACHE_VIPT_ALIASING - -#define clear_user_page(addr, vaddr, pg) clear_page(addr) -#define copy_user_page(vto, vfrom, vaddr, pg) copy_page(vto, vfrom) - -#else /* VIPT aliasing dcache */ - struct vm_area_struct; struct page; @@ -35,8 +28,6 @@ void copy_user_highpage(struct page *to, struct page *from, unsigned long u_vaddr, struct vm_area_struct *vma); void clear_user_page(void *to, unsigned long u_vaddr, struct page *page); -#endif /* CONFIG_ARC_CACHE_VIPT_ALIASING */ - #undef STRICT_MM_TYPECHECKS #ifdef STRICT_MM_TYPECHECKS diff --git a/arch/arc/mm/cache_arc700.c b/arch/arc/mm/cache_arc700.c index d4b7bb616840..aedce1905441 100644 --- a/arch/arc/mm/cache_arc700.c +++ b/arch/arc/mm/cache_arc700.c @@ -676,6 +676,17 @@ void flush_cache_range(struct vm_area_struct *vma, unsigned long start, flush_cache_all(); } +void flush_anon_page(struct vm_area_struct *vma, struct page *page, + unsigned long u_vaddr) +{ + /* TBD: do we really need to clear the kernel mapping */ + __flush_dcache_page(page_address(page), u_vaddr); + __flush_dcache_page(page_address(page), page_address(page)); + +} + +#endif + void copy_user_highpage(struct page *to, struct page *from, unsigned long u_vaddr, struct vm_area_struct *vma) { @@ -725,16 +736,6 @@ void clear_user_page(void *to, unsigned long u_vaddr, struct page *page) set_bit(PG_arch_1, &page->flags); } -void flush_anon_page(struct vm_area_struct *vma, struct page *page, - unsigned long u_vaddr) -{ - /* TBD: do we really need to clear the kernel mapping */ - __flush_dcache_page(page_address(page), u_vaddr); - __flush_dcache_page(page_address(page), page_address(page)); - -} - -#endif /********************************************************************** * Explicit Cache flush request from user space via syscall -- cgit v1.2.3 From 39d4ecdb711ba44e0aa0b2f3db74ed5ac97abe21 Mon Sep 17 00:00:00 2001 From: Charles Keepax Date: Fri, 24 May 2013 11:38:24 +0100 Subject: ASoC: wm5110: Correct DSP4R Mixer control name Signed-off-by: Charles Keepax Signed-off-by: Mark Brown Cc: stable@vger.kernel.org --- sound/soc/codecs/wm5110.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/codecs/wm5110.c b/sound/soc/codecs/wm5110.c index c00480bdf824..ba38f0679662 100644 --- a/sound/soc/codecs/wm5110.c +++ b/sound/soc/codecs/wm5110.c @@ -190,7 +190,7 @@ ARIZONA_MIXER_CONTROLS("DSP2R", ARIZONA_DSP2RMIX_INPUT_1_SOURCE), ARIZONA_MIXER_CONTROLS("DSP3L", ARIZONA_DSP3LMIX_INPUT_1_SOURCE), ARIZONA_MIXER_CONTROLS("DSP3R", ARIZONA_DSP3RMIX_INPUT_1_SOURCE), ARIZONA_MIXER_CONTROLS("DSP4L", ARIZONA_DSP4LMIX_INPUT_1_SOURCE), -ARIZONA_MIXER_CONTROLS("DSP5R", ARIZONA_DSP4RMIX_INPUT_1_SOURCE), +ARIZONA_MIXER_CONTROLS("DSP4R", ARIZONA_DSP4RMIX_INPUT_1_SOURCE), ARIZONA_MIXER_CONTROLS("Mic", ARIZONA_MICMIX_INPUT_1_SOURCE), ARIZONA_MIXER_CONTROLS("Noise", ARIZONA_NOISEMIX_INPUT_1_SOURCE), -- cgit v1.2.3 From 6b3f7b5c2221c7a4fe715ea4fd479b6d07bbcbb5 Mon Sep 17 00:00:00 2001 From: Kyle McMartin Date: Sat, 25 May 2013 12:54:08 -0400 Subject: score: remove redundant kcore_list entries kcore_vmalloc is in fs/proc/kcore.c and kcore_mem is unused across the tree. Noticed while grepping the tree for some other kcore stuff. (score looks pretty unmaintained to me.) Signed-off-by: Kyle McMartin Signed-off-by: Linus Torvalds --- arch/score/mm/init.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/arch/score/mm/init.c b/arch/score/mm/init.c index d8f988a37d16..0940682ab38b 100644 --- a/arch/score/mm/init.c +++ b/arch/score/mm/init.c @@ -41,8 +41,6 @@ unsigned long empty_zero_page; EXPORT_SYMBOL_GPL(empty_zero_page); -static struct kcore_list kcore_mem, kcore_vmalloc; - static void setup_zero_page(void) { struct page *page; -- cgit v1.2.3 From 4d2593cc65fa15f2a36313aa8d03a0937226ad49 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Wed, 22 May 2013 23:09:50 +0000 Subject: qlge: add missing free_netdev() on error in qlge_probe() Add the missing free_netdev() before return from function qlge_probe() in the error handling case. Signed-off-by: Wei Yongjun Acked-by: Jitendra Kalsaria Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qlge/qlge_main.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/ethernet/qlogic/qlge/qlge_main.c b/drivers/net/ethernet/qlogic/qlge/qlge_main.c index 50235d201592..f87cc216045b 100644 --- a/drivers/net/ethernet/qlogic/qlge/qlge_main.c +++ b/drivers/net/ethernet/qlogic/qlge/qlge_main.c @@ -4717,6 +4717,7 @@ static int qlge_probe(struct pci_dev *pdev, dev_err(&pdev->dev, "net device registration failed.\n"); ql_release_all(pdev); pci_disable_device(pdev); + free_netdev(ndev); return err; } /* Start up the timer to trigger EEH if -- cgit v1.2.3 From 0d8c3e77e7fba8c84c871b43f35029daa92acc17 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Wed, 22 May 2013 23:59:28 +0000 Subject: ptp_pch: fix error handling in pch_probe() Fix to release resources when ptp_clock_register() fail instead of return error code directly. Signed-off-by: Wei Yongjun Signed-off-by: David S. Miller --- drivers/ptp/ptp_pch.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/ptp/ptp_pch.c b/drivers/ptp/ptp_pch.c index bea94510ad2d..71a2559278d7 100644 --- a/drivers/ptp/ptp_pch.c +++ b/drivers/ptp/ptp_pch.c @@ -628,9 +628,10 @@ pch_probe(struct pci_dev *pdev, const struct pci_device_id *id) chip->caps = ptp_pch_caps; chip->ptp_clock = ptp_clock_register(&chip->caps, &pdev->dev); - - if (IS_ERR(chip->ptp_clock)) - return PTR_ERR(chip->ptp_clock); + if (IS_ERR(chip->ptp_clock)) { + ret = PTR_ERR(chip->ptp_clock); + goto err_ptp_clock_reg; + } spin_lock_init(&chip->register_lock); @@ -669,6 +670,7 @@ pch_probe(struct pci_dev *pdev, const struct pci_device_id *id) err_req_irq: ptp_clock_unregister(chip->ptp_clock); +err_ptp_clock_reg: iounmap(chip->regs); chip->regs = NULL; -- cgit v1.2.3 From a622260254ee481747cceaaa8609985b29a31565 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Fri, 24 May 2013 05:49:58 +0000 Subject: ip_tunnel: fix kernel panic with icmp_dest_unreach Daniel Petre reported crashes in icmp_dst_unreach() with following call graph: #3 [ffff88003fc03938] __stack_chk_fail at ffffffff81037f77 #4 [ffff88003fc03948] icmp_send at ffffffff814d5fec #5 [ffff88003fc03ae8] ipv4_link_failure at ffffffff814a1795 #6 [ffff88003fc03af8] ipgre_tunnel_xmit at ffffffff814e7965 #7 [ffff88003fc03b78] dev_hard_start_xmit at ffffffff8146e032 #8 [ffff88003fc03bc8] sch_direct_xmit at ffffffff81487d66 #9 [ffff88003fc03c08] __qdisc_run at ffffffff81487efd #10 [ffff88003fc03c48] dev_queue_xmit at ffffffff8146e5a7 #11 [ffff88003fc03c88] ip_finish_output at ffffffff814ab596 Daniel found a similar problem mentioned in http://lkml.indiana.edu/hypermail/linux/kernel/1007.0/00961.html And indeed this is the root cause : skb->cb[] contains data fooling IP stack. We must clear IPCB in ip_tunnel_xmit() sooner in case dst_link_failure() is called. Or else skb->cb[] might contain garbage from GSO segmentation layer. A similar fix was tested on linux-3.9, but gre code was refactored in linux-3.10. I'll send patches for stable kernels as well. Many thanks to Daniel for providing reports, patches and testing ! Reported-by: Daniel Petre Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- net/ipv4/ip_tunnel.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/ipv4/ip_tunnel.c b/net/ipv4/ip_tunnel.c index e4147ec1665a..be2f8da0ae8e 100644 --- a/net/ipv4/ip_tunnel.c +++ b/net/ipv4/ip_tunnel.c @@ -503,6 +503,7 @@ void ip_tunnel_xmit(struct sk_buff *skb, struct net_device *dev, inner_iph = (const struct iphdr *)skb_inner_network_header(skb); + memset(IPCB(skb), 0, sizeof(*IPCB(skb))); dst = tnl_params->daddr; if (dst == 0) { /* NBMA tunnel */ @@ -658,7 +659,6 @@ void ip_tunnel_xmit(struct sk_buff *skb, struct net_device *dev, skb_dst_drop(skb); skb_dst_set(skb, &rt->dst); - memset(IPCB(skb), 0, sizeof(*IPCB(skb))); /* Push down and install the IP header. */ skb_push(skb, sizeof(struct iphdr)); -- cgit v1.2.3 From f6825748bdbe381cfffe2dc13ca0b73050428fac Mon Sep 17 00:00:00 2001 From: Martin Fuzzey Date: Mon, 15 Apr 2013 17:08:35 +0200 Subject: mmc: sdhci-esdhc-imx: Fix SDIO interrupts Currently SDIO interrupts do not work on i.MX53 and maybe others. This was observed with a Marvell 8787 based SDIO wifi adapter using the mwifiex driver and firmware from the Marvell git repository. The symptom was a timeout after firmware download. Observing the SDIO_DAT1 line showed that an interrupt was requested (level 0) but no interrupt was generated in software, the line stayed low until a timeout ocurred and the card was reset. There is a Freescale errata ENGcm11186 "eSDHC misses SDIO interrupt when CINT is disabled" The workaround suggested by this errata is already implemented and involves clearing and then setting the D3CD bit in the host control register [see esdhc_writel_le()] However, when esdhc_writeb_le() is later used to write to SDHCI_HOST_CONTROL it always resets the D3CD bit. To fix this simply add the D3CD bit to the set of bits not modified by esdhc_writeb_le(). Signed-off-by: Martin Fuzzey Signed-off-by: Chris Ball --- drivers/mmc/host/sdhci-esdhc-imx.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c index 67d6dde2ff19..9b0a0a91ea0a 100644 --- a/drivers/mmc/host/sdhci-esdhc-imx.c +++ b/drivers/mmc/host/sdhci-esdhc-imx.c @@ -324,8 +324,10 @@ static void esdhc_writeb_le(struct sdhci_host *host, u8 val, int reg) /* * Do not touch buswidth bits here. This is done in * esdhc_pltfm_bus_width. + * Do not touch the D3CD bit either which is used for the + * SDIO interrupt errata workaround. */ - mask = 0xffff & ~ESDHC_CTRL_BUSWIDTH_MASK; + mask = 0xffff & ~(ESDHC_CTRL_BUSWIDTH_MASK | ESDHC_CTRL_D3CD); esdhc_clrset_le(host, mask, new_val, reg); return; -- cgit v1.2.3 From 361b8482026c926997b1d3d5a045bc9f5bc02b16 Mon Sep 17 00:00:00 2001 From: Lucas Stach Date: Fri, 15 Mar 2013 09:49:26 +0100 Subject: mmc: sdhci-esdhc-imx: fix multiblock reads on i.MX53 The eSDHC controller on the i.MX53 needs an additional, non spec compliant CMD12 after a multiblock read with a predefined number of blocks. Otherwise the internal state machine won't go back to the idle state. This commit effectively reverts 5b6b0ad6 (mmc: sdhci-esdhc-imx: fix for mmc cards on i.MX5), which fixed part of the problem by making multiblock reads work, however this fix was not sufficient when multi- and singleblock reads got intermixed. This implements the recommended workaround (Freescale i.MX Reference Manual, section 29.6.8 "Multi-block Read") by manually sending a CMD12 with the RSPTYP bits cleared. Signed-off-by: Lucas Stach Signed-off-by: Chris Ball --- drivers/mmc/host/sdhci-esdhc-imx.c | 37 ++++++++++++++++++++++++++++++++++--- 1 file changed, 34 insertions(+), 3 deletions(-) diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c index 9b0a0a91ea0a..d5f0d59e1310 100644 --- a/drivers/mmc/host/sdhci-esdhc-imx.c +++ b/drivers/mmc/host/sdhci-esdhc-imx.c @@ -85,6 +85,12 @@ struct pltfm_imx_data { struct clk *clk_ipg; struct clk *clk_ahb; struct clk *clk_per; + enum { + NO_CMD_PENDING, /* no multiblock command pending*/ + MULTIBLK_IN_PROCESS, /* exact multiblock cmd in process */ + WAIT_FOR_INT, /* sent CMD12, waiting for response INT */ + } multiblock_status; + }; static struct platform_device_id imx_esdhc_devtype[] = { @@ -154,6 +160,8 @@ static inline void esdhc_clrset_le(struct sdhci_host *host, u32 mask, u32 val, i static u32 esdhc_readl_le(struct sdhci_host *host, int reg) { + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct pltfm_imx_data *imx_data = pltfm_host->priv; u32 val = readl(host->ioaddr + reg); if (unlikely(reg == SDHCI_CAPABILITIES)) { @@ -175,6 +183,18 @@ static u32 esdhc_readl_le(struct sdhci_host *host, int reg) val &= ~ESDHC_INT_VENDOR_SPEC_DMA_ERR; val |= SDHCI_INT_ADMA_ERROR; } + + /* + * mask off the interrupt we get in response to the manually + * sent CMD12 + */ + if ((imx_data->multiblock_status == WAIT_FOR_INT) && + ((val & SDHCI_INT_RESPONSE) == SDHCI_INT_RESPONSE)) { + val &= ~SDHCI_INT_RESPONSE; + writel(SDHCI_INT_RESPONSE, host->ioaddr + + SDHCI_INT_STATUS); + imx_data->multiblock_status = NO_CMD_PENDING; + } } return val; @@ -211,6 +231,15 @@ static void esdhc_writel_le(struct sdhci_host *host, u32 val, int reg) v = readl(host->ioaddr + ESDHC_VENDOR_SPEC); v &= ~ESDHC_VENDOR_SPEC_SDIO_QUIRK; writel(v, host->ioaddr + ESDHC_VENDOR_SPEC); + + if (imx_data->multiblock_status == MULTIBLK_IN_PROCESS) + { + /* send a manual CMD12 with RESPTYP=none */ + data = MMC_STOP_TRANSMISSION << 24 | + SDHCI_CMD_ABORTCMD << 16; + writel(data, host->ioaddr + SDHCI_TRANSFER_MODE); + imx_data->multiblock_status = WAIT_FOR_INT; + } } if (unlikely(reg == SDHCI_INT_ENABLE || reg == SDHCI_SIGNAL_ENABLE)) { @@ -277,11 +306,13 @@ static void esdhc_writew_le(struct sdhci_host *host, u16 val, int reg) } return; case SDHCI_COMMAND: - if ((host->cmd->opcode == MMC_STOP_TRANSMISSION || - host->cmd->opcode == MMC_SET_BLOCK_COUNT) && - (imx_data->flags & ESDHC_FLAG_MULTIBLK_NO_INT)) + if (host->cmd->opcode == MMC_STOP_TRANSMISSION) val |= SDHCI_CMD_ABORTCMD; + if ((host->cmd->opcode == MMC_SET_BLOCK_COUNT) && + (imx_data->flags & ESDHC_FLAG_MULTIBLK_NO_INT)) + imx_data->multiblock_status = MULTIBLK_IN_PROCESS; + if (is_imx6q_usdhc(imx_data)) writel(val << 16, host->ioaddr + SDHCI_TRANSFER_MODE); -- cgit v1.2.3 From 8c964df07aaf0e70d1756d204c306f69ca5023b8 Mon Sep 17 00:00:00 2001 From: Ludovic Desroches Date: Fri, 19 Apr 2013 09:11:22 +0000 Subject: mmc: atmel-mci: convert to dma_request_slave_channel_compat() Use generic DMA DT helper. Platforms booting with or without DT populated are both supported. Signed-off-by: Ludovic Desroches Acked-by: Jean-Christophe PLAGNIOL-VILLARD Acked-by: Nicolas Ferre Signed-off-by: Chris Ball --- drivers/mmc/host/atmel-mci.c | 25 ++++++++++++------------- 1 file changed, 12 insertions(+), 13 deletions(-) diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c index e75774f72606..aca59d93d5a9 100644 --- a/drivers/mmc/host/atmel-mci.c +++ b/drivers/mmc/host/atmel-mci.c @@ -2230,10 +2230,15 @@ static void __exit atmci_cleanup_slot(struct atmel_mci_slot *slot, mmc_free_host(slot->mmc); } -static bool atmci_filter(struct dma_chan *chan, void *slave) +static bool atmci_filter(struct dma_chan *chan, void *pdata) { - struct mci_dma_data *sl = slave; + struct mci_platform_data *sl_pdata = pdata; + struct mci_dma_data *sl; + if (!sl_pdata) + return false; + + sl = sl_pdata->dma_slave; if (sl && find_slave_dev(sl) == chan->device->dev) { chan->private = slave_data_ptr(sl); return true; @@ -2245,24 +2250,18 @@ static bool atmci_filter(struct dma_chan *chan, void *slave) static bool atmci_configure_dma(struct atmel_mci *host) { struct mci_platform_data *pdata; + dma_cap_mask_t mask; if (host == NULL) return false; pdata = host->pdev->dev.platform_data; - if (!pdata) - return false; + dma_cap_zero(mask); + dma_cap_set(DMA_SLAVE, mask); - if (pdata->dma_slave && find_slave_dev(pdata->dma_slave)) { - dma_cap_mask_t mask; - - /* Try to grab a DMA channel */ - dma_cap_zero(mask); - dma_cap_set(DMA_SLAVE, mask); - host->dma.chan = - dma_request_channel(mask, atmci_filter, pdata->dma_slave); - } + host->dma.chan = dma_request_slave_channel_compat(mask, atmci_filter, pdata, + &host->pdev->dev, "rxtx"); if (!host->dma.chan) { dev_warn(&host->pdev->dev, "no DMA channel available\n"); return false; -- cgit v1.2.3 From 1d1ff45871984364056ebfc528ed31ff7f03f970 Mon Sep 17 00:00:00 2001 From: Adrian Hunter Date: Fri, 26 Apr 2013 11:27:21 +0300 Subject: mmc: sdhci-acpi: fix initial runtime pm status Initial runtime pm status is active. Signed-off-by: Adrian Hunter Signed-off-by: Chris Ball --- drivers/mmc/host/sdhci-acpi.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/mmc/host/sdhci-acpi.c b/drivers/mmc/host/sdhci-acpi.c index 7bcf74b1a5cd..1da5f29abbcb 100644 --- a/drivers/mmc/host/sdhci-acpi.c +++ b/drivers/mmc/host/sdhci-acpi.c @@ -202,6 +202,7 @@ static int sdhci_acpi_probe(struct platform_device *pdev) goto err_free; if (c->use_runtime_pm) { + pm_runtime_set_active(dev); pm_suspend_ignore_children(dev, 1); pm_runtime_set_autosuspend_delay(dev, 50); pm_runtime_use_autosuspend(dev); -- cgit v1.2.3 From 07a588837be0a18075fedf71e6963b5109abec03 Mon Sep 17 00:00:00 2001 From: Adrian Hunter Date: Fri, 26 Apr 2013 11:27:22 +0300 Subject: mmc: sdhci-acpi: add more device ids Add three more ACPI HIDs. Also, as some devices must be further distinguished by ACPI UID, slot information is now associated with HID and UID. Signed-off-by: Adrian Hunter Signed-off-by: Chris Ball --- drivers/mmc/host/sdhci-acpi.c | 68 +++++++++++++++++++++++++++++++++++++------ 1 file changed, 59 insertions(+), 9 deletions(-) diff --git a/drivers/mmc/host/sdhci-acpi.c b/drivers/mmc/host/sdhci-acpi.c index 1da5f29abbcb..706d9cb1a49e 100644 --- a/drivers/mmc/host/sdhci-acpi.c +++ b/drivers/mmc/host/sdhci-acpi.c @@ -87,6 +87,12 @@ static const struct sdhci_ops sdhci_acpi_ops_dflt = { .enable_dma = sdhci_acpi_enable_dma, }; +static const struct sdhci_acpi_slot sdhci_acpi_slot_int_emmc = { + .caps = MMC_CAP_8_BIT_DATA | MMC_CAP_NONREMOVABLE, + .caps2 = MMC_CAP2_HC_ERASE_SZ, + .flags = SDHCI_ACPI_RUNTIME_PM, +}; + static const struct sdhci_acpi_slot sdhci_acpi_slot_int_sdio = { .quirks2 = SDHCI_QUIRK2_HOST_OFF_CARD_ON, .caps = MMC_CAP_NONREMOVABLE | MMC_CAP_POWER_OFF_CARD, @@ -94,23 +100,67 @@ static const struct sdhci_acpi_slot sdhci_acpi_slot_int_sdio = { .pm_caps = MMC_PM_KEEP_POWER, }; +static const struct sdhci_acpi_slot sdhci_acpi_slot_int_sd = { +}; + +struct sdhci_acpi_uid_slot { + const char *hid; + const char *uid; + const struct sdhci_acpi_slot *slot; +}; + +static const struct sdhci_acpi_uid_slot sdhci_acpi_uids[] = { + { "80860F14" , "1" , &sdhci_acpi_slot_int_emmc }, + { "80860F14" , "3" , &sdhci_acpi_slot_int_sd }, + { "INT33BB" , "2" , &sdhci_acpi_slot_int_sdio }, + { "INT33C6" , NULL, &sdhci_acpi_slot_int_sdio }, + { "PNP0D40" }, + { }, +}; + static const struct acpi_device_id sdhci_acpi_ids[] = { - { "INT33C6", (kernel_ulong_t)&sdhci_acpi_slot_int_sdio }, - { "PNP0D40" }, + { "80860F14" }, + { "INT33BB" }, + { "INT33C6" }, + { "PNP0D40" }, { }, }; MODULE_DEVICE_TABLE(acpi, sdhci_acpi_ids); -static const struct sdhci_acpi_slot *sdhci_acpi_get_slot(const char *hid) +static const struct sdhci_acpi_slot *sdhci_acpi_get_slot_by_ids(const char *hid, + const char *uid) { - const struct acpi_device_id *id; - - for (id = sdhci_acpi_ids; id->id[0]; id++) - if (!strcmp(id->id, hid)) - return (const struct sdhci_acpi_slot *)id->driver_data; + const struct sdhci_acpi_uid_slot *u; + + for (u = sdhci_acpi_uids; u->hid; u++) { + if (strcmp(u->hid, hid)) + continue; + if (!u->uid) + return u->slot; + if (uid && !strcmp(u->uid, uid)) + return u->slot; + } return NULL; } +static const struct sdhci_acpi_slot *sdhci_acpi_get_slot(acpi_handle handle, + const char *hid) +{ + const struct sdhci_acpi_slot *slot; + struct acpi_device_info *info; + const char *uid = NULL; + acpi_status status; + + status = acpi_get_object_info(handle, &info); + if (!ACPI_FAILURE(status) && (info->valid & ACPI_VALID_UID)) + uid = info->unique_id.string; + + slot = sdhci_acpi_get_slot_by_ids(hid, uid); + + kfree(info); + return slot; +} + static int sdhci_acpi_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; @@ -148,7 +198,7 @@ static int sdhci_acpi_probe(struct platform_device *pdev) c = sdhci_priv(host); c->host = host; - c->slot = sdhci_acpi_get_slot(hid); + c->slot = sdhci_acpi_get_slot(handle, hid); c->pdev = pdev; c->use_runtime_pm = sdhci_acpi_flag(c, SDHCI_ACPI_RUNTIME_PM); -- cgit v1.2.3 From 728ef3d1939e23e26067608d8d8da9571be14b1d Mon Sep 17 00:00:00 2001 From: Adrian Hunter Date: Fri, 26 Apr 2013 11:27:23 +0300 Subject: mmc: sdhci-pci: add more device ids Add three more PCI device ids. Signed-off-by: Adrian Hunter Signed-off-by: Chris Ball --- drivers/mmc/host/sdhci-pci.c | 54 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 54 insertions(+) diff --git a/drivers/mmc/host/sdhci-pci.c b/drivers/mmc/host/sdhci-pci.c index 0012d3fdc999..701d06d0e1fb 100644 --- a/drivers/mmc/host/sdhci-pci.c +++ b/drivers/mmc/host/sdhci-pci.c @@ -33,6 +33,9 @@ */ #define PCI_DEVICE_ID_INTEL_PCH_SDIO0 0x8809 #define PCI_DEVICE_ID_INTEL_PCH_SDIO1 0x880a +#define PCI_DEVICE_ID_INTEL_BYT_EMMC 0x0f14 +#define PCI_DEVICE_ID_INTEL_BYT_SDIO 0x0f15 +#define PCI_DEVICE_ID_INTEL_BYT_SD 0x0f16 /* * PCI registers @@ -304,6 +307,33 @@ static const struct sdhci_pci_fixes sdhci_intel_pch_sdio = { .probe_slot = pch_hc_probe_slot, }; +static int byt_emmc_probe_slot(struct sdhci_pci_slot *slot) +{ + slot->host->mmc->caps |= MMC_CAP_8_BIT_DATA | MMC_CAP_NONREMOVABLE; + slot->host->mmc->caps2 |= MMC_CAP2_HC_ERASE_SZ; + return 0; +} + +static int byt_sdio_probe_slot(struct sdhci_pci_slot *slot) +{ + slot->host->mmc->caps |= MMC_CAP_POWER_OFF_CARD | MMC_CAP_NONREMOVABLE; + return 0; +} + +static const struct sdhci_pci_fixes sdhci_intel_byt_emmc = { + .allow_runtime_pm = true, + .probe_slot = byt_emmc_probe_slot, +}; + +static const struct sdhci_pci_fixes sdhci_intel_byt_sdio = { + .quirks2 = SDHCI_QUIRK2_HOST_OFF_CARD_ON, + .allow_runtime_pm = true, + .probe_slot = byt_sdio_probe_slot, +}; + +static const struct sdhci_pci_fixes sdhci_intel_byt_sd = { +}; + /* O2Micro extra registers */ #define O2_SD_LOCK_WP 0xD3 #define O2_SD_MULTI_VCC3V 0xEE @@ -855,6 +885,30 @@ static const struct pci_device_id pci_ids[] = { .driver_data = (kernel_ulong_t)&sdhci_intel_pch_sdio, }, + { + .vendor = PCI_VENDOR_ID_INTEL, + .device = PCI_DEVICE_ID_INTEL_BYT_EMMC, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .driver_data = (kernel_ulong_t)&sdhci_intel_byt_emmc, + }, + + { + .vendor = PCI_VENDOR_ID_INTEL, + .device = PCI_DEVICE_ID_INTEL_BYT_SDIO, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .driver_data = (kernel_ulong_t)&sdhci_intel_byt_sdio, + }, + + { + .vendor = PCI_VENDOR_ID_INTEL, + .device = PCI_DEVICE_ID_INTEL_BYT_SD, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .driver_data = (kernel_ulong_t)&sdhci_intel_byt_sd, + }, + { .vendor = PCI_VENDOR_ID_O2, .device = PCI_DEVICE_ID_O2_8120, -- cgit v1.2.3 From cf5ae40b3968ca769e683b9b071685ad82ee893c Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Fri, 10 May 2013 17:42:33 +0530 Subject: mmc: omap_hsmmc: Fix the DT pbias workaround for MMC controllers 2 to 5 Otherwise SDIO cards won't necessarily work when booted with device tree as we will never power down the SDIO cards. This means the SDIO card reset does not happen which at least some WLAN controllers expect to happen with ifconfig wlan0 down. The PBIAS voltage is only available for the first controller instance, so let's limit the PBIAS workaround to the first controller only. Signed-off-by: Tony Lindgren Tested-by: Luciano Coelho Signed-off-by: Balaji T K Signed-off-by: Chris Ball --- drivers/mmc/host/omap_hsmmc.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c index 6e44025acf01..29a63d2839ec 100644 --- a/drivers/mmc/host/omap_hsmmc.c +++ b/drivers/mmc/host/omap_hsmmc.c @@ -161,6 +161,7 @@ struct omap_hsmmc_host { */ struct regulator *vcc; struct regulator *vcc_aux; + int pbias_disable; void __iomem *base; resource_size_t mapbase; spinlock_t irq_lock; /* Prevent races with irq handler */ @@ -255,11 +256,11 @@ static int omap_hsmmc_set_power(struct device *dev, int slot, int power_on, if (!host->vcc) return 0; /* - * With DT, never turn OFF the regulator. This is because + * With DT, never turn OFF the regulator for MMC1. This is because * the pbias cell programming support is still missing when * booting with Device tree */ - if (dev->of_node && !vdd) + if (host->pbias_disable && !vdd) return 0; if (mmc_slot(host).before_set_reg) @@ -1520,10 +1521,10 @@ static void omap_hsmmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) (ios->vdd == DUAL_VOLT_OCR_BIT) && /* * With pbias cell programming missing, this - * can't be allowed when booting with device + * can't be allowed on MMC1 when booting with device * tree. */ - !host->dev->of_node) { + !host->pbias_disable) { /* * The mmc_select_voltage fn of the core does * not seem to set the power_mode to @@ -1871,6 +1872,10 @@ static int omap_hsmmc_probe(struct platform_device *pdev) omap_hsmmc_context_save(host); + /* This can be removed once we support PBIAS with DT */ + if (host->dev->of_node && host->mapbase == 0x4809c000) + host->pbias_disable = 1; + host->dbclk = clk_get(&pdev->dev, "mmchsdb_fck"); /* * MMC can still work without debounce clock. -- cgit v1.2.3 From d272fbf0ca4a59339c768d76858f4add6ff36ace Mon Sep 17 00:00:00 2001 From: Matt Porter Date: Fri, 10 May 2013 17:42:34 +0530 Subject: mmc: omap_hsmmc: convert to dma_request_slave_channel_compat Convert dmaengine channel requests to use dma_request_slave_channel_compat(). This supports platforms booting with or without DT populated. Signed-off-by: Matt Porter Acked-by: Tony Lindgren Acked-by: Arnd Bergmann Signed-off-by: Balaji T K Signed-off-by: Chris Ball --- drivers/mmc/host/omap_hsmmc.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c index 29a63d2839ec..dc89aead35a5 100644 --- a/drivers/mmc/host/omap_hsmmc.c +++ b/drivers/mmc/host/omap_hsmmc.c @@ -1930,14 +1930,20 @@ static int omap_hsmmc_probe(struct platform_device *pdev) dma_cap_zero(mask); dma_cap_set(DMA_SLAVE, mask); - host->rx_chan = dma_request_channel(mask, omap_dma_filter_fn, &rx_req); + host->rx_chan = + dma_request_slave_channel_compat(mask, omap_dma_filter_fn, + &rx_req, &pdev->dev, "rx"); + if (!host->rx_chan) { dev_err(mmc_dev(host->mmc), "unable to obtain RX DMA engine channel %u\n", rx_req); ret = -ENXIO; goto err_irq; } - host->tx_chan = dma_request_channel(mask, omap_dma_filter_fn, &tx_req); + host->tx_chan = + dma_request_slave_channel_compat(mask, omap_dma_filter_fn, + &tx_req, &pdev->dev, "tx"); + if (!host->tx_chan) { dev_err(mmc_dev(host->mmc), "unable to obtain TX DMA engine channel %u\n", tx_req); ret = -ENXIO; -- cgit v1.2.3 From 4a29b5591faf25555fdf2b717594d50f70c15066 Mon Sep 17 00:00:00 2001 From: Santosh Shilimkar Date: Fri, 10 May 2013 17:42:35 +0530 Subject: mmc: omap_hsmmc: Skip platform_get_resource_byname() for dt case MMC driver probe will abort for DT case because of failed platform_get_resource_byname() lookup. Fix it by skipping resource lookup byname for device tree build. Issue is hidden because hwmod populates the IO resources which helps to succeed platform_get_resource_byname() and probe. Signed-off-by: Santosh Shilimkar Signed-off-by: Balaji T K Signed-off-by: Chris Ball --- drivers/mmc/host/omap_hsmmc.c | 28 +++++++++++++++------------- 1 file changed, 15 insertions(+), 13 deletions(-) diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c index dc89aead35a5..eccedc7d06a4 100644 --- a/drivers/mmc/host/omap_hsmmc.c +++ b/drivers/mmc/host/omap_hsmmc.c @@ -1911,21 +1911,23 @@ static int omap_hsmmc_probe(struct platform_device *pdev) omap_hsmmc_conf_bus_power(host); - res = platform_get_resource_byname(pdev, IORESOURCE_DMA, "tx"); - if (!res) { - dev_err(mmc_dev(host->mmc), "cannot get DMA TX channel\n"); - ret = -ENXIO; - goto err_irq; - } - tx_req = res->start; + if (!pdev->dev.of_node) { + res = platform_get_resource_byname(pdev, IORESOURCE_DMA, "tx"); + if (!res) { + dev_err(mmc_dev(host->mmc), "cannot get DMA TX channel\n"); + ret = -ENXIO; + goto err_irq; + } + tx_req = res->start; - res = platform_get_resource_byname(pdev, IORESOURCE_DMA, "rx"); - if (!res) { - dev_err(mmc_dev(host->mmc), "cannot get DMA RX channel\n"); - ret = -ENXIO; - goto err_irq; + res = platform_get_resource_byname(pdev, IORESOURCE_DMA, "rx"); + if (!res) { + dev_err(mmc_dev(host->mmc), "cannot get DMA RX channel\n"); + ret = -ENXIO; + goto err_irq; + } + rx_req = res->start; } - rx_req = res->start; dma_cap_zero(mask); dma_cap_set(DMA_SLAVE, mask); -- cgit v1.2.3 From ab465df9dda42a997f7537c875127eeb6a88158c Mon Sep 17 00:00:00 2001 From: Manfred Spraul Date: Sun, 26 May 2013 11:08:52 +0200 Subject: ipc/sem.c: Fix missing wakeups in do_smart_update_queue() do_smart_update_queue() is called when an operation (semop, semctl(SETVAL), semctl(SETALL), ...) modified the array. It must check which of the sleeping tasks can proceed. do_smart_update_queue() missed a few wakeups: - if a sleeping complex op was completed, then all per-semaphore queues must be scanned - not only those that were modified by *sops - if a sleeping simple op proceeded, then the global queue must be scanned again And: - the test for "|sops == NULL) before scanning the global queue is not required: If the global queue is empty, then it doesn't need to be scanned - regardless of the reason for calling do_smart_update_queue() The patch is not optimized, i.e. even completing a wait-for-zero operation causes a rescan. This is done to keep the patch as simple as possible. Signed-off-by: Manfred Spraul Acked-by: Davidlohr Bueso Cc: Rik van Riel Cc: Andrew Morton Signed-off-by: Linus Torvalds --- ipc/sem.c | 27 ++++++++++++++++++++++----- 1 file changed, 22 insertions(+), 5 deletions(-) diff --git a/ipc/sem.c b/ipc/sem.c index a7e40ed8a076..70480a3aa698 100644 --- a/ipc/sem.c +++ b/ipc/sem.c @@ -752,19 +752,29 @@ static void do_smart_update(struct sem_array *sma, struct sembuf *sops, int nsop int otime, struct list_head *pt) { int i; + int progress; - if (sma->complex_count || sops == NULL) { - if (update_queue(sma, -1, pt)) + progress = 1; +retry_global: + if (sma->complex_count) { + if (update_queue(sma, -1, pt)) { + progress = 1; otime = 1; + sops = NULL; + } } + if (!progress) + goto done; if (!sops) { /* No semops; something special is going on. */ for (i = 0; i < sma->sem_nsems; i++) { - if (update_queue(sma, i, pt)) + if (update_queue(sma, i, pt)) { otime = 1; + progress = 1; + } } - goto done; + goto done_checkretry; } /* Check the semaphores that were modified. */ @@ -772,8 +782,15 @@ static void do_smart_update(struct sem_array *sma, struct sembuf *sops, int nsop if (sops[i].sem_op > 0 || (sops[i].sem_op < 0 && sma->sem_base[sops[i].sem_num].semval == 0)) - if (update_queue(sma, sops[i].sem_num, pt)) + if (update_queue(sma, sops[i].sem_num, pt)) { otime = 1; + progress = 1; + } + } +done_checkretry: + if (progress) { + progress = 0; + goto retry_global; } done: if (otime) -- cgit v1.2.3 From e4aa937ec75df0eea0bee03bffa3303ad36c986b Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sun, 26 May 2013 16:00:47 -0700 Subject: Linux 3.10-rc3 --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index 93875f5122a3..73e20dba55c1 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 3 PATCHLEVEL = 10 SUBLEVEL = 0 -EXTRAVERSION = -rc2 +EXTRAVERSION = -rc3 NAME = Unicycling Gorilla # *DOCUMENTATION* -- cgit v1.2.3 From 9acf73b7d06eaa3fbfbfafc9c835f8fe0d751eff Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Wed, 22 May 2013 10:24:37 +0200 Subject: s390/smp: lost IPIs on cpu hotplug IPIs might be lost when a cpu gets brought offline: When stop_machine executes its state machine there is a race window for the state STOPMACHINE_DISABLE_IRQ where the to be brought offline cpu might already have irqs disabled but a different cpu still may have irqs enabled. If the enabled cpu receives an interrupt and as a result sends an IPI to the to be offlined cpu in its bottom halve context, the IPI won't be noticed before the cpu is offline. In fact the race window is much larger since there is no guarantee when an IPI will be received. To fix this check for enqueued but not yet received IPIs in the cpu_disable() path and call the respective handlers before the cpu is marked offline. Reported-by: Juergen Doelle Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- arch/s390/kernel/smp.c | 27 +++++++++++---------------- 1 file changed, 11 insertions(+), 16 deletions(-) diff --git a/arch/s390/kernel/smp.c b/arch/s390/kernel/smp.c index 05674b669001..4f977d0d25c2 100644 --- a/arch/s390/kernel/smp.c +++ b/arch/s390/kernel/smp.c @@ -428,34 +428,27 @@ void smp_stop_cpu(void) * This is the main routine where commands issued by other * cpus are handled. */ -static void do_ext_call_interrupt(struct ext_code ext_code, - unsigned int param32, unsigned long param64) +static void smp_handle_ext_call(void) { unsigned long bits; - int cpu; - - cpu = smp_processor_id(); - if (ext_code.code == 0x1202) - inc_irq_stat(IRQEXT_EXC); - else - inc_irq_stat(IRQEXT_EMS); - /* - * handle bit signal external calls - */ - bits = xchg(&pcpu_devices[cpu].ec_mask, 0); + /* handle bit signal external calls */ + bits = xchg(&pcpu_devices[smp_processor_id()].ec_mask, 0); if (test_bit(ec_stop_cpu, &bits)) smp_stop_cpu(); - if (test_bit(ec_schedule, &bits)) scheduler_ipi(); - if (test_bit(ec_call_function, &bits)) generic_smp_call_function_interrupt(); - if (test_bit(ec_call_function_single, &bits)) generic_smp_call_function_single_interrupt(); +} +static void do_ext_call_interrupt(struct ext_code ext_code, + unsigned int param32, unsigned long param64) +{ + inc_irq_stat(ext_code.code == 0x1202 ? IRQEXT_EXC : IRQEXT_EMS); + smp_handle_ext_call(); } void arch_send_call_function_ipi_mask(const struct cpumask *mask) @@ -760,6 +753,8 @@ int __cpu_disable(void) { unsigned long cregs[16]; + /* Handle possible pending IPIs */ + smp_handle_ext_call(); set_cpu_online(smp_processor_id(), false); /* Disable pseudo page faults on this cpu. */ pfault_fini(); -- cgit v1.2.3 From 1351c5d3b189a487fbacd5cdf2dc3e6faf12c682 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 23 May 2013 23:09:56 +0200 Subject: mac80211: assign AP_VLAN hw queues correctly A lot of code in mac80211 assumes that the hw queues are set up correctly for all interfaces (except for monitor) but this isn't true for AP_VLAN interfaces. Fix this by copying the AP master configuration when an AP VLAN is brought up, after this the AP interface can't change its configuration any more and needs to be brought down to change it, which also forces AP_VLAN interfaces down, so just copying in open() is sufficient. Reported-by: Jouni Malinen Signed-off-by: Johannes Berg --- net/mac80211/iface.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c index 68f51c3af49f..00e2238355f0 100644 --- a/net/mac80211/iface.c +++ b/net/mac80211/iface.c @@ -474,6 +474,9 @@ int ieee80211_do_open(struct wireless_dev *wdev, bool coming_up) master->control_port_protocol; sdata->control_port_no_encrypt = master->control_port_no_encrypt; + sdata->vif.cab_queue = master->vif.cab_queue; + memcpy(sdata->vif.hw_queue, master->vif.hw_queue, + sizeof(sdata->vif.hw_queue)); break; } case NL80211_IFTYPE_AP: -- cgit v1.2.3 From c8aa22db0112f640ac6631347f850879c621840b Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 24 May 2013 01:06:09 +0200 Subject: mac80211: close AP_VLAN interfaces before unregistering all Since Eric's commit efe117ab8 ("Speedup ieee80211_remove_interfaces") there's a bug in mac80211 when it unregisters with AP_VLAN interfaces up. If the AP_VLAN interface was registered after the AP it belongs to (which is the typical case) and then we get into this code path, unregister_netdevice_many() will crash because it isn't prepared to deal with interfaces being closed in the middle of it. Exactly this happens though, because we iterate the list, find the AP master this AP_VLAN belongs to and dev_close() the dependent VLANs. After this, unregister_netdevice_many() won't pick up the fact that the AP_VLAN is already down and will do it again, causing a crash. Cc: stable@vger.kernel.org [2.6.33+] Cc: Eric Dumazet Signed-off-by: Johannes Berg --- net/mac80211/iface.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c index 00e2238355f0..ceef64426a8d 100644 --- a/net/mac80211/iface.c +++ b/net/mac80211/iface.c @@ -1703,6 +1703,15 @@ void ieee80211_remove_interfaces(struct ieee80211_local *local) ASSERT_RTNL(); + /* + * Close all AP_VLAN interfaces first, as otherwise they + * might be closed while the AP interface they belong to + * is closed, causing unregister_netdevice_many() to crash. + */ + list_for_each_entry(sdata, &local->interfaces, list) + if (sdata->vif.type == NL80211_IFTYPE_AP_VLAN) + dev_close(sdata->dev); + mutex_lock(&local->iflist_mtx); list_for_each_entry_safe(sdata, tmp, &local->interfaces, list) { list_del(&sdata->list); -- cgit v1.2.3 From ac20976dcaeea3e77e40e9aac8f3799d2a22ea2b Mon Sep 17 00:00:00 2001 From: Helmut Schaa Date: Mon, 27 May 2013 10:43:09 +0200 Subject: mac80211: Allow single vif mac address change with addr_mask When changing the MAC address of a single vif mac80211 will check if the new address fits into the address mask specified by the driver. This only needs to be done when using multiple BSSIDs. Hence, check the new address only against all other vifs. Also fix the MAC address assignment on new interfaces if the user changed the address of a vif such that perm_addr is not covered by addr_mask anymore. Resolves: https://bugzilla.kernel.org/show_bug.cgi?id=57371 Signed-off-by: Helmut Schaa Signed-off-by: Jakub Kicinski Reported-by: Alessandro Lannocca Cc: Alessandro Lannocca Cc: Bruno Randolf Signed-off-by: Johannes Berg --- net/mac80211/iface.c | 26 ++++++++++++++++++++------ 1 file changed, 20 insertions(+), 6 deletions(-) diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c index ceef64426a8d..98d20c0f6fed 100644 --- a/net/mac80211/iface.c +++ b/net/mac80211/iface.c @@ -159,9 +159,10 @@ static int ieee80211_change_mtu(struct net_device *dev, int new_mtu) return 0; } -static int ieee80211_verify_mac(struct ieee80211_local *local, u8 *addr) +static int ieee80211_verify_mac(struct ieee80211_sub_if_data *sdata, u8 *addr) { - struct ieee80211_sub_if_data *sdata; + struct ieee80211_local *local = sdata->local; + struct ieee80211_sub_if_data *iter; u64 new, mask, tmp; u8 *m; int ret = 0; @@ -181,11 +182,14 @@ static int ieee80211_verify_mac(struct ieee80211_local *local, u8 *addr) mutex_lock(&local->iflist_mtx); - list_for_each_entry(sdata, &local->interfaces, list) { - if (sdata->vif.type == NL80211_IFTYPE_MONITOR) + list_for_each_entry(iter, &local->interfaces, list) { + if (iter == sdata) continue; - m = sdata->vif.addr; + if (iter->vif.type == NL80211_IFTYPE_MONITOR) + continue; + + m = iter->vif.addr; tmp = ((u64)m[0] << 5*8) | ((u64)m[1] << 4*8) | ((u64)m[2] << 3*8) | ((u64)m[3] << 2*8) | ((u64)m[4] << 1*8) | ((u64)m[5] << 0*8); @@ -209,7 +213,7 @@ static int ieee80211_change_mac(struct net_device *dev, void *addr) if (ieee80211_sdata_running(sdata)) return -EBUSY; - ret = ieee80211_verify_mac(sdata->local, sa->sa_data); + ret = ieee80211_verify_mac(sdata, sa->sa_data); if (ret) return ret; @@ -1486,7 +1490,17 @@ static void ieee80211_assign_perm_addr(struct ieee80211_local *local, break; } + /* + * Pick address of existing interface in case user changed + * MAC address manually, default to perm_addr. + */ m = local->hw.wiphy->perm_addr; + list_for_each_entry(sdata, &local->interfaces, list) { + if (sdata->vif.type == NL80211_IFTYPE_MONITOR) + continue; + m = sdata->vif.addr; + break; + } start = ((u64)m[0] << 5*8) | ((u64)m[1] << 4*8) | ((u64)m[2] << 3*8) | ((u64)m[3] << 2*8) | ((u64)m[4] << 1*8) | ((u64)m[5] << 0*8); -- cgit v1.2.3 From a87783699b23395c46bbeeb5d28f6db24897bf26 Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Wed, 22 May 2013 10:48:10 +0300 Subject: iwlwifi: dvm: fix zero LQ CMD sending avoidance In 63b77bf489881747c5118476918cc8c29378ee63 iwlwifi: dvm: don't send zeroed LQ cmd I tried to avoid to send zeroed LQ cmd, but I made a (very) stupid mistake in the memcmp. Since this patch has been ported to stable, the fix should go to stable too. This fixes https://bugzilla.kernel.org/show_bug.cgi?id=58341 Cc: stable@vger.kernel.org Reported-by: Hinnerk van Bruinehsen Signed-off-by: Emmanuel Grumbach Signed-off-by: Johannes Berg --- drivers/net/wireless/iwlwifi/dvm/sta.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/iwlwifi/dvm/sta.c b/drivers/net/wireless/iwlwifi/dvm/sta.c index db183b44e038..c3c13ce96eb0 100644 --- a/drivers/net/wireless/iwlwifi/dvm/sta.c +++ b/drivers/net/wireless/iwlwifi/dvm/sta.c @@ -735,7 +735,7 @@ void iwl_restore_stations(struct iwl_priv *priv, struct iwl_rxon_context *ctx) memcpy(&lq, priv->stations[i].lq, sizeof(struct iwl_link_quality_cmd)); - if (!memcmp(&lq, &zero_lq, sizeof(lq))) + if (memcmp(&lq, &zero_lq, sizeof(lq))) send_lq = true; } spin_unlock_bh(&priv->sta_lock); -- cgit v1.2.3 From f6a12a7d0b1a70e969ae4f6d7c5201cdaf6edde0 Mon Sep 17 00:00:00 2001 From: "Meyer, Kirk" Date: Thu, 23 May 2013 17:06:57 +0000 Subject: microblaze: Reversed logic in futex cmpxchg futex_atomic_cmpxchg_inatomic exchanged if the values were unequal rather than equal. This caused incorrect behavior of robust futexes. Signed-off-by: Kirk Meyer Signed-off-by: Michal Simek --- arch/microblaze/include/asm/futex.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/microblaze/include/asm/futex.h b/arch/microblaze/include/asm/futex.h index ff8cde159d9a..01848f056f43 100644 --- a/arch/microblaze/include/asm/futex.h +++ b/arch/microblaze/include/asm/futex.h @@ -105,7 +105,7 @@ futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr, __asm__ __volatile__ ("1: lwx %1, %3, r0; \ cmp %2, %1, %4; \ - beqi %2, 3f; \ + bnei %2, 3f; \ 2: swx %5, %3, r0; \ addic %2, r0, 0; \ bnei %2, 1b; \ -- cgit v1.2.3 From dc7b3eb900aab02e5cafbca3948d005be13fb4a5 Mon Sep 17 00:00:00 2001 From: Grzegorz Lyczba Date: Mon, 13 May 2013 23:56:24 +0200 Subject: ipvs: Fix reuse connection if real server is dead Expire cached connection for new TCP/SCTP connection if real server is down. Otherwise, IPVS uses the dead server for the reused connection, instead of a new working one. Signed-off-by: Grzegorz Lyczba Acked-by: Hans Schillstrom Acked-by: Julian Anastasov Signed-off-by: Simon Horman Signed-off-by: Pablo Neira Ayuso --- net/netfilter/ipvs/ip_vs_core.c | 35 +++++++++++++++++++++++++++++++++++ 1 file changed, 35 insertions(+) diff --git a/net/netfilter/ipvs/ip_vs_core.c b/net/netfilter/ipvs/ip_vs_core.c index 085b5880ab0d..05565d2b3a61 100644 --- a/net/netfilter/ipvs/ip_vs_core.c +++ b/net/netfilter/ipvs/ip_vs_core.c @@ -1001,6 +1001,32 @@ static inline int is_tcp_reset(const struct sk_buff *skb, int nh_len) return th->rst; } +static inline bool is_new_conn(const struct sk_buff *skb, + struct ip_vs_iphdr *iph) +{ + switch (iph->protocol) { + case IPPROTO_TCP: { + struct tcphdr _tcph, *th; + + th = skb_header_pointer(skb, iph->len, sizeof(_tcph), &_tcph); + if (th == NULL) + return false; + return th->syn; + } + case IPPROTO_SCTP: { + sctp_chunkhdr_t *sch, schunk; + + sch = skb_header_pointer(skb, iph->len + sizeof(sctp_sctphdr_t), + sizeof(schunk), &schunk); + if (sch == NULL) + return false; + return sch->type == SCTP_CID_INIT; + } + default: + return false; + } +} + /* Handle response packets: rewrite addresses and send away... */ static unsigned int @@ -1612,6 +1638,15 @@ ip_vs_in(unsigned int hooknum, struct sk_buff *skb, int af) * Check if the packet belongs to an existing connection entry */ cp = pp->conn_in_get(af, skb, &iph, 0); + + if (unlikely(sysctl_expire_nodest_conn(ipvs)) && cp && cp->dest && + unlikely(!atomic_read(&cp->dest->weight)) && !iph.fragoffs && + is_new_conn(skb, &iph)) { + ip_vs_conn_expire_now(cp); + __ip_vs_conn_put(cp); + cp = NULL; + } + if (unlikely(!cp) && !iph.fragoffs) { /* No (second) fragments need to enter here, as nf_defrag_ipv6 * replayed fragment zero will already have created the cp -- cgit v1.2.3 From d9f998639f539613bb25cbbca380c81c892d586c Mon Sep 17 00:00:00 2001 From: Doug Anderson Date: Thu, 16 May 2013 21:33:18 -0700 Subject: pinctrl: samsung: fix suspend/resume functionality The GPIO states need to be restored after s2r and this is not currently supported in the pinctrl driver. This patch saves the gpio states before suspend and restores them after resume. Saving and restoring is done very early using syscore_ops and must happen before pins are released from their powerdown state. Patch originally from Prathyush K but rewritten by Doug Anderson . Signed-off-by: Prathyush K Signed-off-by: Doug Anderson Tested-by: Tomasz Figa Acked-by: Kukjin Kim Signed-off-by: Linus Walleij --- drivers/pinctrl/pinctrl-samsung.c | 148 ++++++++++++++++++++++++++++++++++++++ drivers/pinctrl/pinctrl-samsung.h | 5 ++ 2 files changed, 153 insertions(+) diff --git a/drivers/pinctrl/pinctrl-samsung.c b/drivers/pinctrl/pinctrl-samsung.c index 055d0162098b..15db2580c145 100644 --- a/drivers/pinctrl/pinctrl-samsung.c +++ b/drivers/pinctrl/pinctrl-samsung.c @@ -28,6 +28,7 @@ #include #include #include +#include #include "core.h" #include "pinctrl-samsung.h" @@ -48,6 +49,9 @@ static struct pin_config { { "samsung,pin-pud-pdn", PINCFG_TYPE_PUD_PDN }, }; +/* Global list of devices (struct samsung_pinctrl_drv_data) */ +LIST_HEAD(drvdata_list); + static unsigned int pin_base; static inline struct samsung_pin_bank *gc_to_pin_bank(struct gpio_chip *gc) @@ -956,9 +960,145 @@ static int samsung_pinctrl_probe(struct platform_device *pdev) ctrl->eint_wkup_init(drvdata); platform_set_drvdata(pdev, drvdata); + + /* Add to the global list */ + list_add_tail(&drvdata->node, &drvdata_list); + return 0; } +#ifdef CONFIG_PM + +/** + * samsung_pinctrl_suspend_dev - save pinctrl state for suspend for a device + * + * Save data for all banks handled by this device. + */ +static void samsung_pinctrl_suspend_dev( + struct samsung_pinctrl_drv_data *drvdata) +{ + struct samsung_pin_ctrl *ctrl = drvdata->ctrl; + void __iomem *virt_base = drvdata->virt_base; + int i; + + for (i = 0; i < ctrl->nr_banks; i++) { + struct samsung_pin_bank *bank = &ctrl->pin_banks[i]; + void __iomem *reg = virt_base + bank->pctl_offset; + + u8 *offs = bank->type->reg_offset; + u8 *widths = bank->type->fld_width; + enum pincfg_type type; + + /* Registers without a powerdown config aren't lost */ + if (!widths[PINCFG_TYPE_CON_PDN]) + continue; + + for (type = 0; type < PINCFG_TYPE_NUM; type++) + if (widths[type]) + bank->pm_save[type] = readl(reg + offs[type]); + + if (widths[PINCFG_TYPE_FUNC] * bank->nr_pins > 32) { + /* Some banks have two config registers */ + bank->pm_save[PINCFG_TYPE_NUM] = + readl(reg + offs[PINCFG_TYPE_FUNC] + 4); + pr_debug("Save %s @ %p (con %#010x %08x)\n", + bank->name, reg, + bank->pm_save[PINCFG_TYPE_FUNC], + bank->pm_save[PINCFG_TYPE_NUM]); + } else { + pr_debug("Save %s @ %p (con %#010x)\n", bank->name, + reg, bank->pm_save[PINCFG_TYPE_FUNC]); + } + } +} + +/** + * samsung_pinctrl_resume_dev - restore pinctrl state from suspend for a device + * + * Restore one of the banks that was saved during suspend. + * + * We don't bother doing anything complicated to avoid glitching lines since + * we're called before pad retention is turned off. + */ +static void samsung_pinctrl_resume_dev(struct samsung_pinctrl_drv_data *drvdata) +{ + struct samsung_pin_ctrl *ctrl = drvdata->ctrl; + void __iomem *virt_base = drvdata->virt_base; + int i; + + for (i = 0; i < ctrl->nr_banks; i++) { + struct samsung_pin_bank *bank = &ctrl->pin_banks[i]; + void __iomem *reg = virt_base + bank->pctl_offset; + + u8 *offs = bank->type->reg_offset; + u8 *widths = bank->type->fld_width; + enum pincfg_type type; + + /* Registers without a powerdown config aren't lost */ + if (!widths[PINCFG_TYPE_CON_PDN]) + continue; + + if (widths[PINCFG_TYPE_FUNC] * bank->nr_pins > 32) { + /* Some banks have two config registers */ + pr_debug("%s @ %p (con %#010x %08x => %#010x %08x)\n", + bank->name, reg, + readl(reg + offs[PINCFG_TYPE_FUNC]), + readl(reg + offs[PINCFG_TYPE_FUNC] + 4), + bank->pm_save[PINCFG_TYPE_FUNC], + bank->pm_save[PINCFG_TYPE_NUM]); + writel(bank->pm_save[PINCFG_TYPE_NUM], + reg + offs[PINCFG_TYPE_FUNC] + 4); + } else { + pr_debug("%s @ %p (con %#010x => %#010x)\n", bank->name, + reg, readl(reg + offs[PINCFG_TYPE_FUNC]), + bank->pm_save[PINCFG_TYPE_FUNC]); + } + for (type = 0; type < PINCFG_TYPE_NUM; type++) + if (widths[type]) + writel(bank->pm_save[type], reg + offs[type]); + } +} + +/** + * samsung_pinctrl_suspend - save pinctrl state for suspend + * + * Save data for all banks across all devices. + */ +static int samsung_pinctrl_suspend(void) +{ + struct samsung_pinctrl_drv_data *drvdata; + + list_for_each_entry(drvdata, &drvdata_list, node) { + samsung_pinctrl_suspend_dev(drvdata); + } + + return 0; +} + +/** + * samsung_pinctrl_resume - restore pinctrl state for suspend + * + * Restore data for all banks across all devices. + */ +static void samsung_pinctrl_resume(void) +{ + struct samsung_pinctrl_drv_data *drvdata; + + list_for_each_entry_reverse(drvdata, &drvdata_list, node) { + samsung_pinctrl_resume_dev(drvdata); + } +} + +#else +#define samsung_pinctrl_suspend NULL +#define samsung_pinctrl_resume NULL +#endif + +static struct syscore_ops samsung_pinctrl_syscore_ops = { + .suspend = samsung_pinctrl_suspend, + .resume = samsung_pinctrl_resume, +}; + static const struct of_device_id samsung_pinctrl_dt_match[] = { #ifdef CONFIG_PINCTRL_EXYNOS { .compatible = "samsung,exynos4210-pinctrl", @@ -987,6 +1127,14 @@ static struct platform_driver samsung_pinctrl_driver = { static int __init samsung_pinctrl_drv_register(void) { + /* + * Register syscore ops for save/restore of registers across suspend. + * It's important to ensure that this driver is running at an earlier + * initcall level than any arch-specific init calls that install syscore + * ops that turn off pad retention (like exynos_pm_resume). + */ + register_syscore_ops(&samsung_pinctrl_syscore_ops); + return platform_driver_register(&samsung_pinctrl_driver); } postcore_initcall(samsung_pinctrl_drv_register); diff --git a/drivers/pinctrl/pinctrl-samsung.h b/drivers/pinctrl/pinctrl-samsung.h index 7c7f9ebcd05b..9f5cc811b8cf 100644 --- a/drivers/pinctrl/pinctrl-samsung.h +++ b/drivers/pinctrl/pinctrl-samsung.h @@ -127,6 +127,7 @@ struct samsung_pin_bank_type { * @gpio_chip: GPIO chip of the bank. * @grange: linux gpio pin range supported by this bank. * @slock: spinlock protecting bank registers + * @pm_save: saved register values during suspend */ struct samsung_pin_bank { struct samsung_pin_bank_type *type; @@ -144,6 +145,8 @@ struct samsung_pin_bank { struct gpio_chip gpio_chip; struct pinctrl_gpio_range grange; spinlock_t slock; + + u32 pm_save[PINCFG_TYPE_NUM + 1]; /* +1 to handle double CON registers*/ }; /** @@ -189,6 +192,7 @@ struct samsung_pin_ctrl { /** * struct samsung_pinctrl_drv_data: wrapper for holding driver data together. + * @node: global list node * @virt_base: register base address of the controller. * @dev: device instance representing the controller. * @irq: interrpt number used by the controller to notify gpio interrupts. @@ -201,6 +205,7 @@ struct samsung_pin_ctrl { * @nr_function: number of such pin functions. */ struct samsung_pinctrl_drv_data { + struct list_head node; void __iomem *virt_base; struct device *dev; int irq; -- cgit v1.2.3 From ad350cd9d5411353397843c8f410a6e7e84a71f9 Mon Sep 17 00:00:00 2001 From: Tomasz Figa Date: Fri, 17 May 2013 18:24:27 +0200 Subject: pinctrl: exynos: Add support for set_irq_wake of wake-up EINTs This patch adds support of IRQ wake-up ability configuration for wake-up EINTs on Exynos SoCs. Signed-off-by: Tomasz Figa Signed-off-by: Kyungmin Park Tested-by: Doug Anderson Signed-off-by: Linus Walleij --- drivers/pinctrl/pinctrl-exynos.c | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+) diff --git a/drivers/pinctrl/pinctrl-exynos.c b/drivers/pinctrl/pinctrl-exynos.c index ac742817ebce..4f868e59227e 100644 --- a/drivers/pinctrl/pinctrl-exynos.c +++ b/drivers/pinctrl/pinctrl-exynos.c @@ -326,6 +326,28 @@ static int exynos_wkup_irq_set_type(struct irq_data *irqd, unsigned int type) return 0; } +static u32 exynos_eint_wake_mask = 0xffffffff; + +u32 exynos_get_eint_wake_mask(void) +{ + return exynos_eint_wake_mask; +} + +static int exynos_wkup_irq_set_wake(struct irq_data *irqd, unsigned int on) +{ + struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(irqd); + unsigned long bit = 1UL << (2 * bank->eint_offset + irqd->hwirq); + + pr_info("wake %s for irq %d\n", on ? "enabled" : "disabled", irqd->irq); + + if (!on) + exynos_eint_wake_mask |= bit; + else + exynos_eint_wake_mask &= ~bit; + + return 0; +} + /* * irq_chip for wakeup interrupts */ @@ -335,6 +357,7 @@ static struct irq_chip exynos_wkup_irq_chip = { .irq_mask = exynos_wkup_irq_mask, .irq_ack = exynos_wkup_irq_ack, .irq_set_type = exynos_wkup_irq_set_type, + .irq_set_wake = exynos_wkup_irq_set_wake, }; /* interrupt handler for wakeup interrupts 0..15 */ -- cgit v1.2.3 From b134dc3feaa5136b376c7d2658bbe156bea19e63 Mon Sep 17 00:00:00 2001 From: Tomasz Figa Date: Fri, 17 May 2013 18:24:28 +0200 Subject: ARM: EXYNOS: Fix EINT wake-up mask configuration when pinctrl is used On DT-enabled systems pinctrl-exynos driver is responsible for handling of wake-up EINT interrupts. This patch adjusts wake-up mask configuration code to take wake-up mask value from pinctrl-exynos driver on DT-enabled systems. Signed-off-by: Tomasz Figa Signed-off-by: Kyungmin Park Tested-by: Doug Anderson Signed-off-by: Linus Walleij --- arch/arm/mach-exynos/include/mach/pm-core.h | 14 +++++++++++++- 1 file changed, 13 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-exynos/include/mach/pm-core.h b/arch/arm/mach-exynos/include/mach/pm-core.h index 7dbbfec13ea5..296090e7f423 100644 --- a/arch/arm/mach-exynos/include/mach/pm-core.h +++ b/arch/arm/mach-exynos/include/mach/pm-core.h @@ -18,8 +18,15 @@ #ifndef __ASM_ARCH_PM_CORE_H #define __ASM_ARCH_PM_CORE_H __FILE__ +#include #include +#ifdef CONFIG_PINCTRL_EXYNOS +extern u32 exynos_get_eint_wake_mask(void); +#else +static inline u32 exynos_get_eint_wake_mask(void) { return 0xffffffff; } +#endif + static inline void s3c_pm_debug_init_uart(void) { /* nothing here yet */ @@ -27,7 +34,12 @@ static inline void s3c_pm_debug_init_uart(void) static inline void s3c_pm_arch_prepare_irqs(void) { - __raw_writel(s3c_irqwake_eintmask, S5P_EINT_WAKEUP_MASK); + u32 eintmask = s3c_irqwake_eintmask; + + if (of_have_populated_dt()) + eintmask = exynos_get_eint_wake_mask(); + + __raw_writel(eintmask, S5P_EINT_WAKEUP_MASK); __raw_writel(s3c_irqwake_intmask & ~(1 << 31), S5P_WAKEUP_MASK); } -- cgit v1.2.3 From 97fc463769f1564e8eda2e2f70d3b6e92a25ff16 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Sun, 19 May 2013 13:58:37 +0800 Subject: pinctrl: Don't override the error code in probe error handling Otherwise, we return 0 in probe error paths when gpiochip_remove() returns 0. Also show error message if gpiochip_remove() fails. Signed-off-by: Axel Lin Acked-by: Tony Prisk Acked-by: Maxime Ripard Signed-off-by: Linus Walleij --- drivers/pinctrl/pinctrl-coh901.c | 3 ++- drivers/pinctrl/pinctrl-sunxi.c | 3 ++- drivers/pinctrl/vt8500/pinctrl-wmt.c | 3 +-- 3 files changed, 5 insertions(+), 4 deletions(-) diff --git a/drivers/pinctrl/pinctrl-coh901.c b/drivers/pinctrl/pinctrl-coh901.c index a67af419f531..d6b41747d687 100644 --- a/drivers/pinctrl/pinctrl-coh901.c +++ b/drivers/pinctrl/pinctrl-coh901.c @@ -830,7 +830,8 @@ static int __init u300_gpio_probe(struct platform_device *pdev) return 0; err_no_range: - err = gpiochip_remove(&gpio->chip); + if (gpiochip_remove(&gpio->chip)) + dev_err(&pdev->dev, "failed to remove gpio chip\n"); err_no_chip: err_no_domain: err_no_port: diff --git a/drivers/pinctrl/pinctrl-sunxi.c b/drivers/pinctrl/pinctrl-sunxi.c index c52fc2c08732..c058529db8f6 100644 --- a/drivers/pinctrl/pinctrl-sunxi.c +++ b/drivers/pinctrl/pinctrl-sunxi.c @@ -2000,7 +2000,8 @@ static int sunxi_pinctrl_probe(struct platform_device *pdev) return 0; gpiochip_error: - ret = gpiochip_remove(pctl->chip); + if (gpiochip_remove(pctl->chip)) + dev_err(&pdev->dev, "failed to remove gpio chip\n"); pinctrl_error: pinctrl_unregister(pctl->pctl_dev); return ret; diff --git a/drivers/pinctrl/vt8500/pinctrl-wmt.c b/drivers/pinctrl/vt8500/pinctrl-wmt.c index ab63104e8dc9..70d986e04afb 100644 --- a/drivers/pinctrl/vt8500/pinctrl-wmt.c +++ b/drivers/pinctrl/vt8500/pinctrl-wmt.c @@ -609,8 +609,7 @@ int wmt_pinctrl_probe(struct platform_device *pdev, return 0; fail_range: - err = gpiochip_remove(&data->gpio_chip); - if (err) + if (gpiochip_remove(&data->gpio_chip)) dev_err(&pdev->dev, "failed to remove gpio chip\n"); fail_gpio: pinctrl_unregister(data->pctl_dev); -- cgit v1.2.3 From 21c219933fd123d4cdfc8853f51c41330b9d6c28 Mon Sep 17 00:00:00 2001 From: Tomasz Figa Date: Fri, 17 May 2013 18:24:30 +0200 Subject: pinctrl: samsung: Add support for SoC-specific suspend/resume callbacks SoC-specific driver might require additional save and restore of registers. This patch adds pair of SoC-specific callbacks per pinctrl device to account for this. Signed-off-by: Tomasz Figa Signed-off-by: Kyungmin Park Tested-by: Doug Anderson Signed-off-by: Linus Walleij --- drivers/pinctrl/pinctrl-samsung.c | 6 ++++++ drivers/pinctrl/pinctrl-samsung.h | 3 +++ 2 files changed, 9 insertions(+) diff --git a/drivers/pinctrl/pinctrl-samsung.c b/drivers/pinctrl/pinctrl-samsung.c index 15db2580c145..63ac22e89678 100644 --- a/drivers/pinctrl/pinctrl-samsung.c +++ b/drivers/pinctrl/pinctrl-samsung.c @@ -1010,6 +1010,9 @@ static void samsung_pinctrl_suspend_dev( reg, bank->pm_save[PINCFG_TYPE_FUNC]); } } + + if (ctrl->suspend) + ctrl->suspend(drvdata); } /** @@ -1026,6 +1029,9 @@ static void samsung_pinctrl_resume_dev(struct samsung_pinctrl_drv_data *drvdata) void __iomem *virt_base = drvdata->virt_base; int i; + if (ctrl->resume) + ctrl->resume(drvdata); + for (i = 0; i < ctrl->nr_banks; i++) { struct samsung_pin_bank *bank = &ctrl->pin_banks[i]; void __iomem *reg = virt_base + bank->pctl_offset; diff --git a/drivers/pinctrl/pinctrl-samsung.h b/drivers/pinctrl/pinctrl-samsung.h index 9f5cc811b8cf..b316d9fe9b6b 100644 --- a/drivers/pinctrl/pinctrl-samsung.h +++ b/drivers/pinctrl/pinctrl-samsung.h @@ -187,6 +187,9 @@ struct samsung_pin_ctrl { int (*eint_gpio_init)(struct samsung_pinctrl_drv_data *); int (*eint_wkup_init)(struct samsung_pinctrl_drv_data *); + void (*suspend)(struct samsung_pinctrl_drv_data *); + void (*resume)(struct samsung_pinctrl_drv_data *); + char *label; }; -- cgit v1.2.3 From 3385474c3a2f5e81df67cba426c29beefd8a5c18 Mon Sep 17 00:00:00 2001 From: Tomasz Figa Date: Fri, 17 May 2013 18:24:31 +0200 Subject: pinctrl: samsung: Allow per-bank SoC-specific private data This patch extends pin bank descriptor structure with SoC-specific private data field that allows SoC-specific drivers to store their own private data. Signed-off-by: Tomasz Figa Signed-off-by: Kyungmin Park Tested-by: Doug Anderson Signed-off-by: Linus Walleij --- drivers/pinctrl/pinctrl-samsung.h | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/pinctrl/pinctrl-samsung.h b/drivers/pinctrl/pinctrl-samsung.h index b316d9fe9b6b..26d3519240c9 100644 --- a/drivers/pinctrl/pinctrl-samsung.h +++ b/drivers/pinctrl/pinctrl-samsung.h @@ -139,6 +139,7 @@ struct samsung_pin_bank { u32 eint_mask; u32 eint_offset; char *name; + void *soc_priv; struct device_node *of_node; struct samsung_pinctrl_drv_data *drvdata; struct irq_domain *irq_domain; -- cgit v1.2.3 From 7ccbc60cd9c293304829662b043f4356f554fc3a Mon Sep 17 00:00:00 2001 From: Tomasz Figa Date: Wed, 22 May 2013 16:03:17 +0200 Subject: pinctrl: exynos: Handle suspend/resume of GPIO EINT registers Some GPIO EINT control registers needs to be preserved across suspend/resume cycle. This patch extends the driver to take care of this. Signed-off-by: Tomasz Figa Signed-off-by: Kyungmin Park Signed-off-by: Linus Walleij --- drivers/pinctrl/pinctrl-exynos.c | 116 ++++++++++++++++++++++++++++++++++++++- drivers/pinctrl/pinctrl-exynos.h | 1 + 2 files changed, 114 insertions(+), 3 deletions(-) diff --git a/drivers/pinctrl/pinctrl-exynos.c b/drivers/pinctrl/pinctrl-exynos.c index 4f868e59227e..2d76f66a2e0b 100644 --- a/drivers/pinctrl/pinctrl-exynos.c +++ b/drivers/pinctrl/pinctrl-exynos.c @@ -196,6 +196,12 @@ static irqreturn_t exynos_eint_gpio_irq(int irq, void *data) return IRQ_HANDLED; } +struct exynos_eint_gpio_save { + u32 eint_con; + u32 eint_fltcon0; + u32 eint_fltcon1; +}; + /* * exynos_eint_gpio_init() - setup handling of external gpio interrupts. * @d: driver data of samsung pinctrl driver. @@ -204,8 +210,8 @@ static int exynos_eint_gpio_init(struct samsung_pinctrl_drv_data *d) { struct samsung_pin_bank *bank; struct device *dev = d->dev; - unsigned int ret; - unsigned int i; + int ret; + int i; if (!d->irq) { dev_err(dev, "irq number not available\n"); @@ -227,11 +233,29 @@ static int exynos_eint_gpio_init(struct samsung_pinctrl_drv_data *d) bank->nr_pins, &exynos_gpio_irqd_ops, bank); if (!bank->irq_domain) { dev_err(dev, "gpio irq domain add failed\n"); - return -ENXIO; + ret = -ENXIO; + goto err_domains; + } + + bank->soc_priv = devm_kzalloc(d->dev, + sizeof(struct exynos_eint_gpio_save), GFP_KERNEL); + if (!bank->soc_priv) { + irq_domain_remove(bank->irq_domain); + ret = -ENOMEM; + goto err_domains; } } return 0; + +err_domains: + for (--i, --bank; i >= 0; --i, --bank) { + if (bank->eint_type != EINT_TYPE_GPIO) + continue; + irq_domain_remove(bank->irq_domain); + } + + return ret; } static void exynos_wkup_irq_unmask(struct irq_data *irqd) @@ -528,6 +552,72 @@ static int exynos_eint_wkup_init(struct samsung_pinctrl_drv_data *d) return 0; } +static void exynos_pinctrl_suspend_bank( + struct samsung_pinctrl_drv_data *drvdata, + struct samsung_pin_bank *bank) +{ + struct exynos_eint_gpio_save *save = bank->soc_priv; + void __iomem *regs = drvdata->virt_base; + + save->eint_con = readl(regs + EXYNOS_GPIO_ECON_OFFSET + + bank->eint_offset); + save->eint_fltcon0 = readl(regs + EXYNOS_GPIO_EFLTCON_OFFSET + + 2 * bank->eint_offset); + save->eint_fltcon1 = readl(regs + EXYNOS_GPIO_EFLTCON_OFFSET + + 2 * bank->eint_offset + 4); + + pr_debug("%s: save con %#010x\n", bank->name, save->eint_con); + pr_debug("%s: save fltcon0 %#010x\n", bank->name, save->eint_fltcon0); + pr_debug("%s: save fltcon1 %#010x\n", bank->name, save->eint_fltcon1); +} + +static void exynos_pinctrl_suspend(struct samsung_pinctrl_drv_data *drvdata) +{ + struct samsung_pin_ctrl *ctrl = drvdata->ctrl; + struct samsung_pin_bank *bank = ctrl->pin_banks; + int i; + + for (i = 0; i < ctrl->nr_banks; ++i, ++bank) + if (bank->eint_type == EINT_TYPE_GPIO) + exynos_pinctrl_suspend_bank(drvdata, bank); +} + +static void exynos_pinctrl_resume_bank( + struct samsung_pinctrl_drv_data *drvdata, + struct samsung_pin_bank *bank) +{ + struct exynos_eint_gpio_save *save = bank->soc_priv; + void __iomem *regs = drvdata->virt_base; + + pr_debug("%s: con %#010x => %#010x\n", bank->name, + readl(regs + EXYNOS_GPIO_ECON_OFFSET + + bank->eint_offset), save->eint_con); + pr_debug("%s: fltcon0 %#010x => %#010x\n", bank->name, + readl(regs + EXYNOS_GPIO_EFLTCON_OFFSET + + 2 * bank->eint_offset), save->eint_fltcon0); + pr_debug("%s: fltcon1 %#010x => %#010x\n", bank->name, + readl(regs + EXYNOS_GPIO_EFLTCON_OFFSET + + 2 * bank->eint_offset + 4), save->eint_fltcon1); + + writel(save->eint_con, regs + EXYNOS_GPIO_ECON_OFFSET + + bank->eint_offset); + writel(save->eint_fltcon0, regs + EXYNOS_GPIO_EFLTCON_OFFSET + + 2 * bank->eint_offset); + writel(save->eint_fltcon1, regs + EXYNOS_GPIO_EFLTCON_OFFSET + + 2 * bank->eint_offset + 4); +} + +static void exynos_pinctrl_resume(struct samsung_pinctrl_drv_data *drvdata) +{ + struct samsung_pin_ctrl *ctrl = drvdata->ctrl; + struct samsung_pin_bank *bank = ctrl->pin_banks; + int i; + + for (i = 0; i < ctrl->nr_banks; ++i, ++bank) + if (bank->eint_type == EINT_TYPE_GPIO) + exynos_pinctrl_resume_bank(drvdata, bank); +} + /* pin banks of exynos4210 pin-controller 0 */ static struct samsung_pin_bank exynos4210_pin_banks0[] = { EXYNOS_PIN_BANK_EINTG(8, 0x000, "gpa0", 0x00), @@ -591,6 +681,8 @@ struct samsung_pin_ctrl exynos4210_pin_ctrl[] = { .geint_pend = EXYNOS_GPIO_EPEND_OFFSET, .svc = EXYNOS_SVC_OFFSET, .eint_gpio_init = exynos_eint_gpio_init, + .suspend = exynos_pinctrl_suspend, + .resume = exynos_pinctrl_resume, .label = "exynos4210-gpio-ctrl0", }, { /* pin-controller instance 1 data */ @@ -605,6 +697,8 @@ struct samsung_pin_ctrl exynos4210_pin_ctrl[] = { .svc = EXYNOS_SVC_OFFSET, .eint_gpio_init = exynos_eint_gpio_init, .eint_wkup_init = exynos_eint_wkup_init, + .suspend = exynos_pinctrl_suspend, + .resume = exynos_pinctrl_resume, .label = "exynos4210-gpio-ctrl1", }, { /* pin-controller instance 2 data */ @@ -686,6 +780,8 @@ struct samsung_pin_ctrl exynos4x12_pin_ctrl[] = { .geint_pend = EXYNOS_GPIO_EPEND_OFFSET, .svc = EXYNOS_SVC_OFFSET, .eint_gpio_init = exynos_eint_gpio_init, + .suspend = exynos_pinctrl_suspend, + .resume = exynos_pinctrl_resume, .label = "exynos4x12-gpio-ctrl0", }, { /* pin-controller instance 1 data */ @@ -700,6 +796,8 @@ struct samsung_pin_ctrl exynos4x12_pin_ctrl[] = { .svc = EXYNOS_SVC_OFFSET, .eint_gpio_init = exynos_eint_gpio_init, .eint_wkup_init = exynos_eint_wkup_init, + .suspend = exynos_pinctrl_suspend, + .resume = exynos_pinctrl_resume, .label = "exynos4x12-gpio-ctrl1", }, { /* pin-controller instance 2 data */ @@ -710,6 +808,8 @@ struct samsung_pin_ctrl exynos4x12_pin_ctrl[] = { .geint_pend = EXYNOS_GPIO_EPEND_OFFSET, .svc = EXYNOS_SVC_OFFSET, .eint_gpio_init = exynos_eint_gpio_init, + .suspend = exynos_pinctrl_suspend, + .resume = exynos_pinctrl_resume, .label = "exynos4x12-gpio-ctrl2", }, { /* pin-controller instance 3 data */ @@ -720,6 +820,8 @@ struct samsung_pin_ctrl exynos4x12_pin_ctrl[] = { .geint_pend = EXYNOS_GPIO_EPEND_OFFSET, .svc = EXYNOS_SVC_OFFSET, .eint_gpio_init = exynos_eint_gpio_init, + .suspend = exynos_pinctrl_suspend, + .resume = exynos_pinctrl_resume, .label = "exynos4x12-gpio-ctrl3", }, }; @@ -798,6 +900,8 @@ struct samsung_pin_ctrl exynos5250_pin_ctrl[] = { .svc = EXYNOS_SVC_OFFSET, .eint_gpio_init = exynos_eint_gpio_init, .eint_wkup_init = exynos_eint_wkup_init, + .suspend = exynos_pinctrl_suspend, + .resume = exynos_pinctrl_resume, .label = "exynos5250-gpio-ctrl0", }, { /* pin-controller instance 1 data */ @@ -808,6 +912,8 @@ struct samsung_pin_ctrl exynos5250_pin_ctrl[] = { .geint_pend = EXYNOS_GPIO_EPEND_OFFSET, .svc = EXYNOS_SVC_OFFSET, .eint_gpio_init = exynos_eint_gpio_init, + .suspend = exynos_pinctrl_suspend, + .resume = exynos_pinctrl_resume, .label = "exynos5250-gpio-ctrl1", }, { /* pin-controller instance 2 data */ @@ -818,6 +924,8 @@ struct samsung_pin_ctrl exynos5250_pin_ctrl[] = { .geint_pend = EXYNOS_GPIO_EPEND_OFFSET, .svc = EXYNOS_SVC_OFFSET, .eint_gpio_init = exynos_eint_gpio_init, + .suspend = exynos_pinctrl_suspend, + .resume = exynos_pinctrl_resume, .label = "exynos5250-gpio-ctrl2", }, { /* pin-controller instance 3 data */ @@ -828,6 +936,8 @@ struct samsung_pin_ctrl exynos5250_pin_ctrl[] = { .geint_pend = EXYNOS_GPIO_EPEND_OFFSET, .svc = EXYNOS_SVC_OFFSET, .eint_gpio_init = exynos_eint_gpio_init, + .suspend = exynos_pinctrl_suspend, + .resume = exynos_pinctrl_resume, .label = "exynos5250-gpio-ctrl3", }, }; diff --git a/drivers/pinctrl/pinctrl-exynos.h b/drivers/pinctrl/pinctrl-exynos.h index 9b1f77a5bf0f..3c91c357792f 100644 --- a/drivers/pinctrl/pinctrl-exynos.h +++ b/drivers/pinctrl/pinctrl-exynos.h @@ -19,6 +19,7 @@ /* External GPIO and wakeup interrupt related definitions */ #define EXYNOS_GPIO_ECON_OFFSET 0x700 +#define EXYNOS_GPIO_EFLTCON_OFFSET 0x800 #define EXYNOS_GPIO_EMASK_OFFSET 0x900 #define EXYNOS_GPIO_EPEND_OFFSET 0xA00 #define EXYNOS_WKUP_ECON_OFFSET 0xE00 -- cgit v1.2.3 From d72f88a42bf9761e3a92e58879d25a65712ca87a Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Thu, 23 May 2013 17:32:14 +0800 Subject: pinctrl: sunxi: fix error return code in sunxi_pinctrl_probe() Fix to return a negative error code from the devm_clk_get() error handling case instead of 0, as done elsewhere in this function. Introduced by commit 950707c0eb5c7aeaa2c446a04c824f4be686d2f6 (pinctrl: sunxi: add clock support) Signed-off-by: Wei Yongjun Signed-off-by: Linus Walleij --- drivers/pinctrl/pinctrl-sunxi.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/pinctrl/pinctrl-sunxi.c b/drivers/pinctrl/pinctrl-sunxi.c index c058529db8f6..b7d8c890514c 100644 --- a/drivers/pinctrl/pinctrl-sunxi.c +++ b/drivers/pinctrl/pinctrl-sunxi.c @@ -1990,8 +1990,10 @@ static int sunxi_pinctrl_probe(struct platform_device *pdev) } clk = devm_clk_get(&pdev->dev, NULL); - if (IS_ERR(clk)) + if (IS_ERR(clk)) { + ret = PTR_ERR(clk); goto gpiochip_error; + } clk_prepare_enable(clk); -- cgit v1.2.3 From a386267a2ceea33d76fa2b7f1c2e72a858fcb68e Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Mon, 27 May 2013 15:53:32 +0200 Subject: pinctrl: pinconf: take the right mutex The pinconf_dgb_config_print() takes the per-pincontroller mutex, when what it wants to take is actually the pin maps mutex. Reported-by: James Hogan Cc: Patrice Chotard Signed-off-by: Linus Walleij --- drivers/pinctrl/pinconf.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/pinctrl/pinconf.c b/drivers/pinctrl/pinconf.c index c67c37e23dd7..694c3ace4520 100644 --- a/drivers/pinctrl/pinconf.c +++ b/drivers/pinctrl/pinconf.c @@ -610,7 +610,7 @@ static int pinconf_dbg_config_print(struct seq_file *s, void *d) bool found = false; unsigned long config; - mutex_lock(&pctldev->mutex); + mutex_lock(&pinctrl_maps_mutex); /* Parse the pinctrl map and look for the elected pin/state */ for_each_maps(maps_node, i, map) { @@ -659,7 +659,7 @@ static int pinconf_dbg_config_print(struct seq_file *s, void *d) confops->pin_config_config_dbg_show(pctldev, s, config); exit: - mutex_unlock(&pctldev->mutex); + mutex_unlock(&pinctrl_maps_mutex); return 0; } -- cgit v1.2.3 From de614e561b9c633073caae8f86399aa8923ef85d Mon Sep 17 00:00:00 2001 From: Jussi Kivilinna Date: Tue, 21 May 2013 17:09:41 +0300 Subject: crypto: sha256_ssse3 - fix stack corruption with SSSE3 and AVX implementations The _XFER stack element size was set too small, 8 bytes, when it needs to be 16 bytes. As _XFER is the last stack element used by these implementations, the 16 byte stores with 'movdqa' corrupt the stack where the value of register %r12 is temporarily stored. As these implementations align the stack pointer to 16 bytes, this corruption did not happen every time. Patch corrects this issue. Reported-by: Julian Wollrath Signed-off-by: Jussi Kivilinna Tested-by: Julian Wollrath Acked-by: Tim Chen Signed-off-by: Herbert Xu --- arch/x86/crypto/sha256-avx-asm.S | 2 +- arch/x86/crypto/sha256-ssse3-asm.S | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/x86/crypto/sha256-avx-asm.S b/arch/x86/crypto/sha256-avx-asm.S index 56610c4bf31b..642f15687a0a 100644 --- a/arch/x86/crypto/sha256-avx-asm.S +++ b/arch/x86/crypto/sha256-avx-asm.S @@ -118,7 +118,7 @@ y2 = %r15d _INP_END_SIZE = 8 _INP_SIZE = 8 -_XFER_SIZE = 8 +_XFER_SIZE = 16 _XMM_SAVE_SIZE = 0 _INP_END = 0 diff --git a/arch/x86/crypto/sha256-ssse3-asm.S b/arch/x86/crypto/sha256-ssse3-asm.S index 98d3c391da81..f833b74d902b 100644 --- a/arch/x86/crypto/sha256-ssse3-asm.S +++ b/arch/x86/crypto/sha256-ssse3-asm.S @@ -111,7 +111,7 @@ y2 = %r15d _INP_END_SIZE = 8 _INP_SIZE = 8 -_XFER_SIZE = 8 +_XFER_SIZE = 16 _XMM_SAVE_SIZE = 0 _INP_END = 0 -- cgit v1.2.3 From 9a9c56cb34e65000d1f0a4b7553399bfcf7c5a52 Mon Sep 17 00:00:00 2001 From: Giuseppe CAVALLARO Date: Sun, 26 May 2013 21:31:28 +0000 Subject: net: phy: fix a bug when verify the EEE support The phy_init_eee has to exit with an error when the local device and its link partner both do not support EEE. So this patch fixes a problem when verify this. Signed-off-by: Giuseppe Cavallaro Signed-off-by: David S. Miller --- drivers/net/phy/phy.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c index c14f14741b3f..38f0b312ff85 100644 --- a/drivers/net/phy/phy.c +++ b/drivers/net/phy/phy.c @@ -1044,7 +1044,7 @@ int phy_init_eee(struct phy_device *phydev, bool clk_stop_enable) adv = mmd_eee_adv_to_ethtool_adv_t(eee_adv); lp = mmd_eee_adv_to_ethtool_adv_t(eee_lp); idx = phy_find_setting(phydev->speed, phydev->duplex); - if ((lp & adv & settings[idx].setting)) + if (!(lp & adv & settings[idx].setting)) goto eee_exit; if (clk_stop_enable) { -- cgit v1.2.3 From f96ef988cc603487c03a6de07807b06cbe641829 Mon Sep 17 00:00:00 2001 From: Michal Kubecek Date: Tue, 28 May 2013 08:26:49 +0200 Subject: ipv4: fix redirect handling for TCP packets Unlike ipv4_redirect() and ipv4_sk_redirect(), ip_do_redirect() doesn't call __build_flow_key() directly but via ip_rt_build_flow_key() wrapper. This leads to __build_flow_key() getting pointer to IPv4 header of the ICMP redirect packet rather than pointer to the embedded IPv4 header of the packet initiating the redirect. As a result, handling of ICMP redirects initiated by TCP packets is broken. Issue was introduced by 4895c771c ("ipv4: Add FIB nexthop exceptions.") Signed-off-by: Michal Kubecek Signed-off-by: David S. Miller --- net/ipv4/route.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/net/ipv4/route.c b/net/ipv4/route.c index 550781a17b34..d35bbf0cf404 100644 --- a/net/ipv4/route.c +++ b/net/ipv4/route.c @@ -737,10 +737,15 @@ static void ip_do_redirect(struct dst_entry *dst, struct sock *sk, struct sk_buf { struct rtable *rt; struct flowi4 fl4; + const struct iphdr *iph = (const struct iphdr *) skb->data; + int oif = skb->dev->ifindex; + u8 tos = RT_TOS(iph->tos); + u8 prot = iph->protocol; + u32 mark = skb->mark; rt = (struct rtable *) dst; - ip_rt_build_flow_key(&fl4, sk, skb); + __build_flow_key(&fl4, sk, iph, oif, tos, prot, mark, 0); __ip_do_redirect(rt, skb, &fl4, true); } -- cgit v1.2.3 From c89b65e7fffef745bdd36c372aa0dea778fecbab Mon Sep 17 00:00:00 2001 From: Andrew Jones Date: Mon, 27 May 2013 15:58:04 +0200 Subject: qxl: fix Kconfig deps - select FB_DEFERRED_IO Signed-off-by: Andrew Jones Signed-off-by: Dave Airlie --- drivers/gpu/drm/qxl/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpu/drm/qxl/Kconfig b/drivers/gpu/drm/qxl/Kconfig index 2f1a57e11140..d6c12796023c 100644 --- a/drivers/gpu/drm/qxl/Kconfig +++ b/drivers/gpu/drm/qxl/Kconfig @@ -4,6 +4,7 @@ config DRM_QXL select FB_SYS_FILLRECT select FB_SYS_COPYAREA select FB_SYS_IMAGEBLIT + select FB_DEFERRED_IO select DRM_KMS_HELPER select DRM_TTM help -- cgit v1.2.3 From 37c14e83ee173cc3f6310d80f00f2e588c402b61 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Tue, 28 May 2013 10:22:06 +0200 Subject: m68k: Update defconfigs for v3.9 Signed-off-by: Geert Uytterhoeven --- arch/m68k/configs/amiga_defconfig | 230 ++++++++++++++++++++++-------- arch/m68k/configs/apollo_defconfig | 215 ++++++++++++++++++++-------- arch/m68k/configs/atari_defconfig | 227 ++++++++++++++++++++++-------- arch/m68k/configs/bvme6000_defconfig | 217 ++++++++++++++++++++-------- arch/m68k/configs/hp300_defconfig | 214 +++++++++++++++++++++------- arch/m68k/configs/mac_defconfig | 234 +++++++++++++++++++++++-------- arch/m68k/configs/multi_defconfig | 264 ++++++++++++++++++++++++----------- arch/m68k/configs/mvme147_defconfig | 215 ++++++++++++++++++++-------- arch/m68k/configs/mvme16x_defconfig | 216 ++++++++++++++++++++-------- arch/m68k/configs/q40_defconfig | 229 ++++++++++++++++++++++-------- arch/m68k/configs/sun3_defconfig | 209 ++++++++++++++++++++------- arch/m68k/configs/sun3x_defconfig | 210 +++++++++++++++++++++------- 12 files changed, 1982 insertions(+), 698 deletions(-) diff --git a/arch/m68k/configs/amiga_defconfig b/arch/m68k/configs/amiga_defconfig index 90d3109c82f4..19325e117eea 100644 --- a/arch/m68k/configs/amiga_defconfig +++ b/arch/m68k/configs/amiga_defconfig @@ -1,55 +1,78 @@ -CONFIG_EXPERIMENTAL=y CONFIG_LOCALVERSION="-amiga" CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y +CONFIG_FHANDLE=y CONFIG_BSD_PROCESS_ACCT=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_RELAY=y +CONFIG_BSD_PROCESS_ACCT_V3=y +CONFIG_LOG_BUF_SHIFT=16 +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +# CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SLAB=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y -CONFIG_AMIGA=y +CONFIG_PARTITION_ADVANCED=y +CONFIG_ATARI_PARTITION=y +CONFIG_MAC_PARTITION=y +CONFIG_BSD_DISKLABEL=y +CONFIG_MINIX_SUBPARTITION=y +CONFIG_SOLARIS_X86_PARTITION=y +CONFIG_UNIXWARE_DISKLABEL=y +CONFIG_SUN_PARTITION=y +# CONFIG_EFI_PARTITION is not set +CONFIG_SYSV68_PARTITION=y +CONFIG_IOSCHED_DEADLINE=m CONFIG_M68020=y CONFIG_M68030=y CONFIG_M68040=y CONFIG_M68060=y -CONFIG_BINFMT_AOUT=m -CONFIG_BINFMT_MISC=m +CONFIG_AMIGA=y CONFIG_ZORRO=y CONFIG_AMIGA_PCMCIA=y -CONFIG_HEARTBEAT=y -CONFIG_PROC_HARDWARE=y CONFIG_ZORRO_NAMES=y +# CONFIG_COMPACTION is not set +CONFIG_CLEANCACHE=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_BINFMT_AOUT=m +CONFIG_BINFMT_MISC=m CONFIG_NET=y CONFIG_PACKET=y +CONFIG_PACKET_DIAG=m CONFIG_UNIX=y +CONFIG_UNIX_DIAG=m +CONFIG_XFRM_MIGRATE=y CONFIG_NET_KEY=y -CONFIG_NET_KEY_MIGRATE=y CONFIG_INET=y CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_IP_PNP_RARP=y CONFIG_NET_IPIP=m +CONFIG_NET_IPGRE_DEMUX=m CONFIG_NET_IPGRE=m CONFIG_SYN_COOKIES=y +CONFIG_NET_IPVTI=m CONFIG_INET_AH=m CONFIG_INET_ESP=m CONFIG_INET_IPCOMP=m CONFIG_INET_XFRM_MODE_TRANSPORT=m CONFIG_INET_XFRM_MODE_TUNNEL=m CONFIG_INET_XFRM_MODE_BEET=m +# CONFIG_INET_LRO is not set CONFIG_INET_DIAG=m +CONFIG_INET_UDP_DIAG=m CONFIG_IPV6_PRIVACY=y CONFIG_IPV6_ROUTER_PREF=y -CONFIG_IPV6_ROUTE_INFO=y CONFIG_INET6_AH=m CONFIG_INET6_ESP=m CONFIG_INET6_IPCOMP=m -CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m -CONFIG_IPV6_TUNNEL=m +CONFIG_IPV6_GRE=m CONFIG_NETFILTER=y -CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NF_CONNTRACK=m +CONFIG_NF_CONNTRACK_ZONES=y +# CONFIG_NF_CONNTRACK_PROCFS is not set # CONFIG_NF_CT_PROTO_DCCP is not set CONFIG_NF_CT_PROTO_UDPLITE=m CONFIG_NF_CONNTRACK_AMANDA=m @@ -57,25 +80,37 @@ CONFIG_NF_CONNTRACK_FTP=m CONFIG_NF_CONNTRACK_H323=m CONFIG_NF_CONNTRACK_IRC=m CONFIG_NF_CONNTRACK_NETBIOS_NS=m +CONFIG_NF_CONNTRACK_SNMP=m CONFIG_NF_CONNTRACK_PPTP=m CONFIG_NF_CONNTRACK_SANE=m CONFIG_NF_CONNTRACK_SIP=m CONFIG_NF_CONNTRACK_TFTP=m +CONFIG_NETFILTER_XT_SET=m +CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m CONFIG_NETFILTER_XT_TARGET_CONNMARK=m CONFIG_NETFILTER_XT_TARGET_DSCP=m +CONFIG_NETFILTER_XT_TARGET_HMARK=m +CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m +CONFIG_NETFILTER_XT_TARGET_LOG=m CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFLOG=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m +CONFIG_NETFILTER_XT_TARGET_NOTRACK=m +CONFIG_NETFILTER_XT_TARGET_TEE=m CONFIG_NETFILTER_XT_TARGET_TRACE=m CONFIG_NETFILTER_XT_TARGET_TCPMSS=m CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m +CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m +CONFIG_NETFILTER_XT_MATCH_BPF=m CONFIG_NETFILTER_XT_MATCH_CLUSTER=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m +CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m CONFIG_NETFILTER_XT_MATCH_CONNMARK=m CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m +CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m CONFIG_NETFILTER_XT_MATCH_DSCP=m CONFIG_NETFILTER_XT_MATCH_ESP=m CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m @@ -86,6 +121,8 @@ CONFIG_NETFILTER_XT_MATCH_LIMIT=m CONFIG_NETFILTER_XT_MATCH_MAC=m CONFIG_NETFILTER_XT_MATCH_MARK=m CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m +CONFIG_NETFILTER_XT_MATCH_NFACCT=m +CONFIG_NETFILTER_XT_MATCH_OSF=m CONFIG_NETFILTER_XT_MATCH_OWNER=m CONFIG_NETFILTER_XT_MATCH_POLICY=m CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m @@ -99,22 +136,31 @@ CONFIG_NETFILTER_XT_MATCH_STRING=m CONFIG_NETFILTER_XT_MATCH_TCPMSS=m CONFIG_NETFILTER_XT_MATCH_TIME=m CONFIG_NETFILTER_XT_MATCH_U32=m +CONFIG_IP_SET=m +CONFIG_IP_SET_BITMAP_IP=m +CONFIG_IP_SET_BITMAP_IPMAC=m +CONFIG_IP_SET_BITMAP_PORT=m +CONFIG_IP_SET_HASH_IP=m +CONFIG_IP_SET_HASH_IPPORT=m +CONFIG_IP_SET_HASH_IPPORTIP=m +CONFIG_IP_SET_HASH_IPPORTNET=m +CONFIG_IP_SET_HASH_NET=m +CONFIG_IP_SET_HASH_NETPORT=m +CONFIG_IP_SET_HASH_NETIFACE=m +CONFIG_IP_SET_LIST_SET=m CONFIG_NF_CONNTRACK_IPV4=m -CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_ADDRTYPE=m CONFIG_IP_NF_MATCH_AH=m CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_RPFILTER=m CONFIG_IP_NF_MATCH_TTL=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_LOG=m CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_NF_NAT=m +CONFIG_NF_NAT_IPV4=m CONFIG_IP_NF_TARGET_MASQUERADE=m CONFIG_IP_NF_TARGET_NETMAP=m CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_NF_NAT_SNMP_BASIC=m CONFIG_IP_NF_MANGLE=m CONFIG_IP_NF_TARGET_CLUSTERIP=m CONFIG_IP_NF_TARGET_ECN=m @@ -124,7 +170,6 @@ CONFIG_IP_NF_ARPTABLES=m CONFIG_IP_NF_ARPFILTER=m CONFIG_IP_NF_ARP_MANGLE=m CONFIG_NF_CONNTRACK_IPV6=m -CONFIG_IP6_NF_QUEUE=m CONFIG_IP6_NF_IPTABLES=m CONFIG_IP6_NF_MATCH_AH=m CONFIG_IP6_NF_MATCH_EUI64=m @@ -133,18 +178,30 @@ CONFIG_IP6_NF_MATCH_OPTS=m CONFIG_IP6_NF_MATCH_HL=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m CONFIG_IP6_NF_MATCH_MH=m +CONFIG_IP6_NF_MATCH_RPFILTER=m CONFIG_IP6_NF_MATCH_RT=m CONFIG_IP6_NF_TARGET_HL=m -CONFIG_IP6_NF_TARGET_LOG=m CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_REJECT=m CONFIG_IP6_NF_MANGLE=m CONFIG_IP6_NF_RAW=m +CONFIG_NF_NAT_IPV6=m +CONFIG_IP6_NF_TARGET_MASQUERADE=m +CONFIG_IP6_NF_TARGET_NPT=m CONFIG_IP_DCCP=m # CONFIG_IP_DCCP_CCID3 is not set +CONFIG_SCTP_COOKIE_HMAC_SHA1=y +CONFIG_RDS=m +CONFIG_RDS_TCP=m +CONFIG_L2TP=m CONFIG_ATALK=m +CONFIG_BATMAN_ADV=m +CONFIG_BATMAN_ADV_DAT=y +# CONFIG_WIRELESS is not set CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y # CONFIG_FIRMWARE_IN_KERNEL is not set +# CONFIG_FW_LOADER_USER_HELPER is not set CONFIG_CONNECTOR=m CONFIG_PARPORT=m CONFIG_PARPORT_AMIGA=m @@ -154,11 +211,13 @@ CONFIG_AMIGA_FLOPPY=y CONFIG_AMIGA_Z2RAM=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_CRYPTOLOOP=m +CONFIG_BLK_DEV_DRBD=m CONFIG_BLK_DEV_NBD=m CONFIG_BLK_DEV_RAM=y CONFIG_CDROM_PKTCDVD=m CONFIG_ATA_OVER_ETH=m CONFIG_IDE=y +CONFIG_IDE_GD_ATAPI=y CONFIG_BLK_DEV_IDECD=y CONFIG_BLK_DEV_GAYLE=y CONFIG_BLK_DEV_BUDDHA=y @@ -172,57 +231,77 @@ CONFIG_BLK_DEV_SR=y CONFIG_BLK_DEV_SR_VENDOR=y CONFIG_CHR_DEV_SG=m CONFIG_SCSI_CONSTANTS=y -CONFIG_SCSI_SAS_LIBSAS=m -# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set -CONFIG_SCSI_SRP_ATTRS=m -CONFIG_SCSI_SRP_TGT_ATTRS=y +CONFIG_SCSI_SAS_ATTRS=m CONFIG_ISCSI_TCP=m +CONFIG_ISCSI_BOOT_SYSFS=m CONFIG_A3000_SCSI=y CONFIG_A2091_SCSI=y CONFIG_GVP11_SCSI=y CONFIG_SCSI_A4000T=y CONFIG_SCSI_ZORRO7XX=y CONFIG_MD=y -CONFIG_BLK_DEV_MD=m CONFIG_MD_LINEAR=m CONFIG_MD_RAID0=m -CONFIG_MD_RAID1=m -CONFIG_MD_RAID456=m CONFIG_BLK_DEV_DM=m CONFIG_DM_CRYPT=m CONFIG_DM_SNAPSHOT=m +CONFIG_DM_THIN_PROVISIONING=m +CONFIG_DM_CACHE=m CONFIG_DM_MIRROR=m +CONFIG_DM_RAID=m CONFIG_DM_ZERO=m CONFIG_DM_MULTIPATH=m CONFIG_DM_UEVENT=y +CONFIG_TARGET_CORE=m +CONFIG_TCM_IBLOCK=m +CONFIG_TCM_FILEIO=m +CONFIG_TCM_PSCSI=m CONFIG_NETDEVICES=y CONFIG_DUMMY=m -CONFIG_MACVLAN=m CONFIG_EQUALIZER=m +CONFIG_NET_TEAM=m +CONFIG_NET_TEAM_MODE_BROADCAST=m +CONFIG_NET_TEAM_MODE_ROUNDROBIN=m +CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m +CONFIG_NET_TEAM_MODE_LOADBALANCE=m +CONFIG_VXLAN=m +CONFIG_NETCONSOLE=m +CONFIG_NETCONSOLE_DYNAMIC=y CONFIG_VETH=m -CONFIG_NET_ETHERNET=y -CONFIG_ARIADNE=y +# CONFIG_NET_VENDOR_3COM is not set CONFIG_A2065=y +CONFIG_ARIADNE=y +# CONFIG_NET_CADENCE is not set +# CONFIG_NET_VENDOR_BROADCOM is not set +# CONFIG_NET_VENDOR_CIRRUS is not set +# CONFIG_NET_VENDOR_FUJITSU is not set +# CONFIG_NET_VENDOR_HP is not set +# CONFIG_NET_VENDOR_INTEL is not set +# CONFIG_NET_VENDOR_MARVELL is not set +# CONFIG_NET_VENDOR_MICREL is not set CONFIG_HYDRA=y -CONFIG_ZORRO8390=y CONFIG_APNE=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set +CONFIG_ZORRO8390=y +# CONFIG_NET_VENDOR_SEEQ is not set +# CONFIG_NET_VENDOR_SMSC is not set +# CONFIG_NET_VENDOR_STMICRO is not set +# CONFIG_NET_VENDOR_WIZNET is not set CONFIG_PPP=m -CONFIG_PPP_FILTER=y -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m -CONFIG_PPP_DEFLATE=m CONFIG_PPP_BSDCOMP=m +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_FILTER=y CONFIG_PPP_MPPE=m CONFIG_PPPOE=m +CONFIG_PPTP=m +CONFIG_PPPOL2TP=m +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m CONFIG_SLIP=m CONFIG_SLIP_COMPRESSED=y CONFIG_SLIP_SMART=y CONFIG_SLIP_MODE_SLIP6=y -CONFIG_NETCONSOLE=m -CONFIG_NETCONSOLE_DYNAMIC=y -CONFIG_INPUT_FF_MEMLESS=m +# CONFIG_WLAN is not set +CONFIG_INPUT_EVDEV=m CONFIG_KEYBOARD_AMIGA=y # CONFIG_KEYBOARD_ATKBD is not set # CONFIG_MOUSE_PS2 is not set @@ -233,11 +312,14 @@ CONFIG_INPUT_MISC=y CONFIG_INPUT_M68K_BEEP=m # CONFIG_SERIO is not set CONFIG_VT_HW_CONSOLE_BINDING=y +# CONFIG_LEGACY_PTYS is not set # CONFIG_DEVKMEM is not set CONFIG_PRINTER=m # CONFIG_HW_RANDOM is not set -CONFIG_GEN_RTC=m -CONFIG_GEN_RTC_X=y +CONFIG_NTP_PPS=y +CONFIG_PPS_CLIENT_LDISC=m +CONFIG_PPS_CLIENT_PARPORT=m +CONFIG_PTP_1588_CLOCK=m # CONFIG_HWMON is not set CONFIG_FB=y CONFIG_FB_CIRRUS=y @@ -252,48 +334,64 @@ CONFIG_SOUND=m CONFIG_DMASOUND_PAULA=m CONFIG_HID=m CONFIG_HIDRAW=y +CONFIG_UHID=m +# CONFIG_HID_GENERIC is not set # CONFIG_USB_SUPPORT is not set +CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_MSM6242=m +CONFIG_RTC_DRV_RP5C01=m +# CONFIG_IOMMU_SUPPORT is not set +CONFIG_HEARTBEAT=y +CONFIG_PROC_HARDWARE=y CONFIG_AMIGA_BUILTIN_SERIAL=y CONFIG_SERIAL_CONSOLE=y CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set # CONFIG_EXT3_FS_XATTR is not set +CONFIG_EXT4_FS=y CONFIG_REISERFS_FS=m CONFIG_JFS_FS=m CONFIG_XFS_FS=m CONFIG_OCFS2_FS=m -# CONFIG_OCFS2_FS_STATS is not set # CONFIG_OCFS2_DEBUG_MASKLOG is not set +CONFIG_FANOTIFY=y CONFIG_QUOTA_NETLINK_INTERFACE=y # CONFIG_PRINT_QUOTA_WARNING is not set -CONFIG_AUTOFS_FS=m CONFIG_AUTOFS4_FS=m CONFIG_FUSE_FS=m +CONFIG_CUSE=m CONFIG_ISO9660_FS=y CONFIG_JOLIET=y CONFIG_ZISOFS=y CONFIG_UDF_FS=m -CONFIG_MSDOS_FS=y +CONFIG_MSDOS_FS=m CONFIG_VFAT_FS=m CONFIG_PROC_KCORE=y CONFIG_TMPFS=y CONFIG_AFFS_FS=m +CONFIG_ECRYPT_FS=m +CONFIG_ECRYPT_FS_MESSAGING=y CONFIG_HFS_FS=m CONFIG_HFSPLUS_FS=m CONFIG_CRAMFS=m CONFIG_SQUASHFS=m -CONFIG_MINIX_FS=y +CONFIG_SQUASHFS_LZO=y +CONFIG_MINIX_FS=m +CONFIG_OMFS_FS=m CONFIG_HPFS_FS=m +CONFIG_QNX4FS_FS=m +CONFIG_QNX6FS_FS=m CONFIG_SYSV_FS=m CONFIG_UFS_FS=m CONFIG_NFS_FS=y -CONFIG_NFS_V3=y CONFIG_NFS_V4=y +CONFIG_NFS_SWAP=y +CONFIG_ROOT_NFS=y CONFIG_NFSD=m CONFIG_NFSD_V3=y -CONFIG_SMB_FS=m -CONFIG_SMB_NLS_DEFAULT=y +CONFIG_CIFS=m +# CONFIG_CIFS_DEBUG is not set CONFIG_CODA_FS=m CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_CODEPAGE_737=m @@ -332,10 +430,23 @@ CONFIG_NLS_ISO8859_14=m CONFIG_NLS_ISO8859_15=m CONFIG_NLS_KOI8_R=m CONFIG_NLS_KOI8_U=m +CONFIG_NLS_MAC_ROMAN=m +CONFIG_NLS_MAC_CELTIC=m +CONFIG_NLS_MAC_CENTEURO=m +CONFIG_NLS_MAC_CROATIAN=m +CONFIG_NLS_MAC_CYRILLIC=m +CONFIG_NLS_MAC_GAELIC=m +CONFIG_NLS_MAC_GREEK=m +CONFIG_NLS_MAC_ICELAND=m +CONFIG_NLS_MAC_INUIT=m +CONFIG_NLS_MAC_ROMANIAN=m +CONFIG_NLS_MAC_TURKISH=m CONFIG_DLM=m CONFIG_MAGIC_SYSRQ=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_ASYNC_RAID6_TEST=m +CONFIG_ENCRYPTED_KEYS=m +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_USER=m CONFIG_CRYPTO_NULL=m CONFIG_CRYPTO_CRYPTD=m CONFIG_CRYPTO_TEST=m @@ -345,19 +456,16 @@ CONFIG_CRYPTO_CTS=m CONFIG_CRYPTO_LRW=m CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_XTS=m -CONFIG_CRYPTO_HMAC=y CONFIG_CRYPTO_XCBC=m -CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_VMAC=m CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_RMD128=m CONFIG_CRYPTO_RMD160=m CONFIG_CRYPTO_RMD256=m CONFIG_CRYPTO_RMD320=m -CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m CONFIG_CRYPTO_TGR192=m CONFIG_CRYPTO_WP512=m -CONFIG_CRYPTO_AES=m CONFIG_CRYPTO_ANUBIS=m CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_CAMELLIA=m @@ -373,6 +481,14 @@ CONFIG_CRYPTO_TWOFISH=m CONFIG_CRYPTO_ZLIB=m CONFIG_CRYPTO_LZO=m # CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_USER_API_HASH=m +CONFIG_CRYPTO_USER_API_SKCIPHER=m # CONFIG_CRYPTO_HW is not set -CONFIG_CRC16=m CONFIG_CRC_T10DIF=y +CONFIG_XZ_DEC_X86=y +CONFIG_XZ_DEC_POWERPC=y +CONFIG_XZ_DEC_IA64=y +CONFIG_XZ_DEC_ARM=y +CONFIG_XZ_DEC_ARMTHUMB=y +CONFIG_XZ_DEC_SPARC=y +CONFIG_XZ_DEC_TEST=m diff --git a/arch/m68k/configs/apollo_defconfig b/arch/m68k/configs/apollo_defconfig index 8f4f657fdbc6..14dc6ccda7f4 100644 --- a/arch/m68k/configs/apollo_defconfig +++ b/arch/m68k/configs/apollo_defconfig @@ -1,55 +1,76 @@ -CONFIG_EXPERIMENTAL=y CONFIG_LOCALVERSION="-apollo" CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y +CONFIG_FHANDLE=y CONFIG_BSD_PROCESS_ACCT=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_RELAY=y +CONFIG_BSD_PROCESS_ACCT_V3=y +CONFIG_LOG_BUF_SHIFT=16 +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +# CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SLAB=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y -CONFIG_APOLLO=y +CONFIG_PARTITION_ADVANCED=y +CONFIG_AMIGA_PARTITION=y +CONFIG_ATARI_PARTITION=y +CONFIG_MAC_PARTITION=y +CONFIG_BSD_DISKLABEL=y +CONFIG_MINIX_SUBPARTITION=y +CONFIG_SOLARIS_X86_PARTITION=y +CONFIG_UNIXWARE_DISKLABEL=y +CONFIG_SUN_PARTITION=y +# CONFIG_EFI_PARTITION is not set +CONFIG_SYSV68_PARTITION=y +CONFIG_IOSCHED_DEADLINE=m CONFIG_M68020=y CONFIG_M68030=y CONFIG_M68040=y CONFIG_M68060=y +CONFIG_APOLLO=y +# CONFIG_COMPACTION is not set +CONFIG_CLEANCACHE=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set CONFIG_BINFMT_AOUT=m CONFIG_BINFMT_MISC=m -CONFIG_HEARTBEAT=y -CONFIG_PROC_HARDWARE=y CONFIG_NET=y CONFIG_PACKET=y +CONFIG_PACKET_DIAG=m CONFIG_UNIX=y +CONFIG_UNIX_DIAG=m +CONFIG_XFRM_MIGRATE=y CONFIG_NET_KEY=y -CONFIG_NET_KEY_MIGRATE=y CONFIG_INET=y CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y CONFIG_IP_PNP_RARP=y CONFIG_NET_IPIP=m +CONFIG_NET_IPGRE_DEMUX=m CONFIG_NET_IPGRE=m CONFIG_SYN_COOKIES=y +CONFIG_NET_IPVTI=m CONFIG_INET_AH=m CONFIG_INET_ESP=m CONFIG_INET_IPCOMP=m CONFIG_INET_XFRM_MODE_TRANSPORT=m CONFIG_INET_XFRM_MODE_TUNNEL=m CONFIG_INET_XFRM_MODE_BEET=m +# CONFIG_INET_LRO is not set CONFIG_INET_DIAG=m +CONFIG_INET_UDP_DIAG=m CONFIG_IPV6_PRIVACY=y CONFIG_IPV6_ROUTER_PREF=y -CONFIG_IPV6_ROUTE_INFO=y CONFIG_INET6_AH=m CONFIG_INET6_ESP=m CONFIG_INET6_IPCOMP=m -CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m -CONFIG_IPV6_TUNNEL=m +CONFIG_IPV6_GRE=m CONFIG_NETFILTER=y -CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NF_CONNTRACK=m +CONFIG_NF_CONNTRACK_ZONES=y +# CONFIG_NF_CONNTRACK_PROCFS is not set # CONFIG_NF_CT_PROTO_DCCP is not set CONFIG_NF_CT_PROTO_UDPLITE=m CONFIG_NF_CONNTRACK_AMANDA=m @@ -57,25 +78,37 @@ CONFIG_NF_CONNTRACK_FTP=m CONFIG_NF_CONNTRACK_H323=m CONFIG_NF_CONNTRACK_IRC=m CONFIG_NF_CONNTRACK_NETBIOS_NS=m +CONFIG_NF_CONNTRACK_SNMP=m CONFIG_NF_CONNTRACK_PPTP=m CONFIG_NF_CONNTRACK_SANE=m CONFIG_NF_CONNTRACK_SIP=m CONFIG_NF_CONNTRACK_TFTP=m +CONFIG_NETFILTER_XT_SET=m +CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m CONFIG_NETFILTER_XT_TARGET_CONNMARK=m CONFIG_NETFILTER_XT_TARGET_DSCP=m +CONFIG_NETFILTER_XT_TARGET_HMARK=m +CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m +CONFIG_NETFILTER_XT_TARGET_LOG=m CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFLOG=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m +CONFIG_NETFILTER_XT_TARGET_NOTRACK=m +CONFIG_NETFILTER_XT_TARGET_TEE=m CONFIG_NETFILTER_XT_TARGET_TRACE=m CONFIG_NETFILTER_XT_TARGET_TCPMSS=m CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m +CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m +CONFIG_NETFILTER_XT_MATCH_BPF=m CONFIG_NETFILTER_XT_MATCH_CLUSTER=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m +CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m CONFIG_NETFILTER_XT_MATCH_CONNMARK=m CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m +CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m CONFIG_NETFILTER_XT_MATCH_DSCP=m CONFIG_NETFILTER_XT_MATCH_ESP=m CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m @@ -86,6 +119,8 @@ CONFIG_NETFILTER_XT_MATCH_LIMIT=m CONFIG_NETFILTER_XT_MATCH_MAC=m CONFIG_NETFILTER_XT_MATCH_MARK=m CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m +CONFIG_NETFILTER_XT_MATCH_NFACCT=m +CONFIG_NETFILTER_XT_MATCH_OSF=m CONFIG_NETFILTER_XT_MATCH_OWNER=m CONFIG_NETFILTER_XT_MATCH_POLICY=m CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m @@ -99,22 +134,31 @@ CONFIG_NETFILTER_XT_MATCH_STRING=m CONFIG_NETFILTER_XT_MATCH_TCPMSS=m CONFIG_NETFILTER_XT_MATCH_TIME=m CONFIG_NETFILTER_XT_MATCH_U32=m +CONFIG_IP_SET=m +CONFIG_IP_SET_BITMAP_IP=m +CONFIG_IP_SET_BITMAP_IPMAC=m +CONFIG_IP_SET_BITMAP_PORT=m +CONFIG_IP_SET_HASH_IP=m +CONFIG_IP_SET_HASH_IPPORT=m +CONFIG_IP_SET_HASH_IPPORTIP=m +CONFIG_IP_SET_HASH_IPPORTNET=m +CONFIG_IP_SET_HASH_NET=m +CONFIG_IP_SET_HASH_NETPORT=m +CONFIG_IP_SET_HASH_NETIFACE=m +CONFIG_IP_SET_LIST_SET=m CONFIG_NF_CONNTRACK_IPV4=m -CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_ADDRTYPE=m CONFIG_IP_NF_MATCH_AH=m CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_RPFILTER=m CONFIG_IP_NF_MATCH_TTL=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_LOG=m CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_NF_NAT=m +CONFIG_NF_NAT_IPV4=m CONFIG_IP_NF_TARGET_MASQUERADE=m CONFIG_IP_NF_TARGET_NETMAP=m CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_NF_NAT_SNMP_BASIC=m CONFIG_IP_NF_MANGLE=m CONFIG_IP_NF_TARGET_CLUSTERIP=m CONFIG_IP_NF_TARGET_ECN=m @@ -124,7 +168,6 @@ CONFIG_IP_NF_ARPTABLES=m CONFIG_IP_NF_ARPFILTER=m CONFIG_IP_NF_ARP_MANGLE=m CONFIG_NF_CONNTRACK_IPV6=m -CONFIG_IP6_NF_QUEUE=m CONFIG_IP6_NF_IPTABLES=m CONFIG_IP6_NF_MATCH_AH=m CONFIG_IP6_NF_MATCH_EUI64=m @@ -133,21 +176,34 @@ CONFIG_IP6_NF_MATCH_OPTS=m CONFIG_IP6_NF_MATCH_HL=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m CONFIG_IP6_NF_MATCH_MH=m +CONFIG_IP6_NF_MATCH_RPFILTER=m CONFIG_IP6_NF_MATCH_RT=m CONFIG_IP6_NF_TARGET_HL=m -CONFIG_IP6_NF_TARGET_LOG=m CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_REJECT=m CONFIG_IP6_NF_MANGLE=m CONFIG_IP6_NF_RAW=m +CONFIG_NF_NAT_IPV6=m +CONFIG_IP6_NF_TARGET_MASQUERADE=m +CONFIG_IP6_NF_TARGET_NPT=m CONFIG_IP_DCCP=m # CONFIG_IP_DCCP_CCID3 is not set +CONFIG_SCTP_COOKIE_HMAC_SHA1=y +CONFIG_RDS=m +CONFIG_RDS_TCP=m +CONFIG_L2TP=m CONFIG_ATALK=m +CONFIG_BATMAN_ADV=m +CONFIG_BATMAN_ADV_DAT=y +# CONFIG_WIRELESS is not set CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y # CONFIG_FIRMWARE_IN_KERNEL is not set +# CONFIG_FW_LOADER_USER_HELPER is not set CONFIG_CONNECTOR=m CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_CRYPTOLOOP=m +CONFIG_BLK_DEV_DRBD=m CONFIG_BLK_DEV_NBD=m CONFIG_BLK_DEV_RAM=y CONFIG_CDROM_PKTCDVD=m @@ -162,57 +218,74 @@ CONFIG_BLK_DEV_SR=y CONFIG_BLK_DEV_SR_VENDOR=y CONFIG_CHR_DEV_SG=m CONFIG_SCSI_CONSTANTS=y -CONFIG_SCSI_SAS_LIBSAS=m -# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set -CONFIG_SCSI_SRP_ATTRS=m -CONFIG_SCSI_SRP_TGT_ATTRS=y +CONFIG_SCSI_SAS_ATTRS=m CONFIG_ISCSI_TCP=m +CONFIG_ISCSI_BOOT_SYSFS=m CONFIG_MD=y -CONFIG_BLK_DEV_MD=m CONFIG_MD_LINEAR=m CONFIG_MD_RAID0=m -CONFIG_MD_RAID1=m -CONFIG_MD_RAID456=m CONFIG_BLK_DEV_DM=m CONFIG_DM_CRYPT=m CONFIG_DM_SNAPSHOT=m +CONFIG_DM_THIN_PROVISIONING=m +CONFIG_DM_CACHE=m CONFIG_DM_MIRROR=m +CONFIG_DM_RAID=m CONFIG_DM_ZERO=m CONFIG_DM_MULTIPATH=m CONFIG_DM_UEVENT=y +CONFIG_TARGET_CORE=m +CONFIG_TCM_IBLOCK=m +CONFIG_TCM_FILEIO=m +CONFIG_TCM_PSCSI=m CONFIG_NETDEVICES=y CONFIG_DUMMY=m -CONFIG_MACVLAN=m CONFIG_EQUALIZER=m +CONFIG_NET_TEAM=m +CONFIG_NET_TEAM_MODE_BROADCAST=m +CONFIG_NET_TEAM_MODE_ROUNDROBIN=m +CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m +CONFIG_NET_TEAM_MODE_LOADBALANCE=m +CONFIG_VXLAN=m +CONFIG_NETCONSOLE=m +CONFIG_NETCONSOLE_DYNAMIC=y CONFIG_VETH=m -CONFIG_NET_ETHERNET=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set +# CONFIG_NET_CADENCE is not set +# CONFIG_NET_VENDOR_BROADCOM is not set +# CONFIG_NET_VENDOR_INTEL is not set +# CONFIG_NET_VENDOR_MARVELL is not set +# CONFIG_NET_VENDOR_MICREL is not set +# CONFIG_NET_VENDOR_NATSEMI is not set +# CONFIG_NET_VENDOR_SEEQ is not set +# CONFIG_NET_VENDOR_STMICRO is not set +# CONFIG_NET_VENDOR_WIZNET is not set CONFIG_PPP=m -CONFIG_PPP_FILTER=y -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m -CONFIG_PPP_DEFLATE=m CONFIG_PPP_BSDCOMP=m +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_FILTER=y CONFIG_PPP_MPPE=m CONFIG_PPPOE=m +CONFIG_PPTP=m +CONFIG_PPPOL2TP=m +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m CONFIG_SLIP=m CONFIG_SLIP_COMPRESSED=y CONFIG_SLIP_SMART=y CONFIG_SLIP_MODE_SLIP6=y -CONFIG_NETCONSOLE=m -CONFIG_NETCONSOLE_DYNAMIC=y -CONFIG_INPUT_FF_MEMLESS=m +# CONFIG_WLAN is not set +CONFIG_INPUT_EVDEV=m # CONFIG_KEYBOARD_ATKBD is not set -CONFIG_MOUSE_PS2=m +# CONFIG_MOUSE_PS2 is not set CONFIG_MOUSE_SERIAL=m CONFIG_SERIO=m -# CONFIG_SERIO_SERPORT is not set CONFIG_VT_HW_CONSOLE_BINDING=y +# CONFIG_LEGACY_PTYS is not set # CONFIG_DEVKMEM is not set # CONFIG_HW_RANDOM is not set -CONFIG_GEN_RTC=m -CONFIG_GEN_RTC_X=y +CONFIG_NTP_PPS=y +CONFIG_PPS_CLIENT_LDISC=m +CONFIG_PTP_1588_CLOCK=m # CONFIG_HWMON is not set CONFIG_FB=y CONFIG_FRAMEBUFFER_CONSOLE=y @@ -221,47 +294,61 @@ CONFIG_LOGO=y # CONFIG_LOGO_LINUX_CLUT224 is not set CONFIG_HID=m CONFIG_HIDRAW=y +CONFIG_UHID=m +# CONFIG_HID_GENERIC is not set # CONFIG_USB_SUPPORT is not set +CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_GENERIC=m +# CONFIG_IOMMU_SUPPORT is not set +CONFIG_HEARTBEAT=y +CONFIG_PROC_HARDWARE=y CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set # CONFIG_EXT3_FS_XATTR is not set +CONFIG_EXT4_FS=y CONFIG_REISERFS_FS=m CONFIG_JFS_FS=m CONFIG_XFS_FS=m CONFIG_OCFS2_FS=m -# CONFIG_OCFS2_FS_STATS is not set # CONFIG_OCFS2_DEBUG_MASKLOG is not set +CONFIG_FANOTIFY=y CONFIG_QUOTA_NETLINK_INTERFACE=y # CONFIG_PRINT_QUOTA_WARNING is not set -CONFIG_AUTOFS_FS=m CONFIG_AUTOFS4_FS=m CONFIG_FUSE_FS=m +CONFIG_CUSE=m CONFIG_ISO9660_FS=y CONFIG_JOLIET=y CONFIG_ZISOFS=y CONFIG_UDF_FS=m -CONFIG_MSDOS_FS=y +CONFIG_MSDOS_FS=m CONFIG_VFAT_FS=m CONFIG_PROC_KCORE=y CONFIG_TMPFS=y CONFIG_AFFS_FS=m +CONFIG_ECRYPT_FS=m +CONFIG_ECRYPT_FS_MESSAGING=y CONFIG_HFS_FS=m CONFIG_HFSPLUS_FS=m CONFIG_CRAMFS=m CONFIG_SQUASHFS=m -CONFIG_MINIX_FS=y +CONFIG_SQUASHFS_LZO=y +CONFIG_MINIX_FS=m +CONFIG_OMFS_FS=m CONFIG_HPFS_FS=m +CONFIG_QNX4FS_FS=m +CONFIG_QNX6FS_FS=m CONFIG_SYSV_FS=m CONFIG_UFS_FS=m CONFIG_NFS_FS=y -CONFIG_NFS_V3=y CONFIG_NFS_V4=y +CONFIG_NFS_SWAP=y CONFIG_ROOT_NFS=y CONFIG_NFSD=m CONFIG_NFSD_V3=y -CONFIG_SMB_FS=m -CONFIG_SMB_NLS_DEFAULT=y +CONFIG_CIFS=m +# CONFIG_CIFS_DEBUG is not set CONFIG_CODA_FS=m CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_CODEPAGE_737=m @@ -300,10 +387,23 @@ CONFIG_NLS_ISO8859_14=m CONFIG_NLS_ISO8859_15=m CONFIG_NLS_KOI8_R=m CONFIG_NLS_KOI8_U=m +CONFIG_NLS_MAC_ROMAN=m +CONFIG_NLS_MAC_CELTIC=m +CONFIG_NLS_MAC_CENTEURO=m +CONFIG_NLS_MAC_CROATIAN=m +CONFIG_NLS_MAC_CYRILLIC=m +CONFIG_NLS_MAC_GAELIC=m +CONFIG_NLS_MAC_GREEK=m +CONFIG_NLS_MAC_ICELAND=m +CONFIG_NLS_MAC_INUIT=m +CONFIG_NLS_MAC_ROMANIAN=m +CONFIG_NLS_MAC_TURKISH=m CONFIG_DLM=m CONFIG_MAGIC_SYSRQ=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_ASYNC_RAID6_TEST=m +CONFIG_ENCRYPTED_KEYS=m +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_USER=m CONFIG_CRYPTO_NULL=m CONFIG_CRYPTO_CRYPTD=m CONFIG_CRYPTO_TEST=m @@ -313,19 +413,16 @@ CONFIG_CRYPTO_CTS=m CONFIG_CRYPTO_LRW=m CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_XTS=m -CONFIG_CRYPTO_HMAC=y CONFIG_CRYPTO_XCBC=m -CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_VMAC=m CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_RMD128=m CONFIG_CRYPTO_RMD160=m CONFIG_CRYPTO_RMD256=m CONFIG_CRYPTO_RMD320=m -CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m CONFIG_CRYPTO_TGR192=m CONFIG_CRYPTO_WP512=m -CONFIG_CRYPTO_AES=m CONFIG_CRYPTO_ANUBIS=m CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_CAMELLIA=m @@ -341,6 +438,14 @@ CONFIG_CRYPTO_TWOFISH=m CONFIG_CRYPTO_ZLIB=m CONFIG_CRYPTO_LZO=m # CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_USER_API_HASH=m +CONFIG_CRYPTO_USER_API_SKCIPHER=m # CONFIG_CRYPTO_HW is not set -CONFIG_CRC16=m CONFIG_CRC_T10DIF=y +CONFIG_XZ_DEC_X86=y +CONFIG_XZ_DEC_POWERPC=y +CONFIG_XZ_DEC_IA64=y +CONFIG_XZ_DEC_ARM=y +CONFIG_XZ_DEC_ARMTHUMB=y +CONFIG_XZ_DEC_SPARC=y +CONFIG_XZ_DEC_TEST=m diff --git a/arch/m68k/configs/atari_defconfig b/arch/m68k/configs/atari_defconfig index 4571d33903fe..6d5370c914b2 100644 --- a/arch/m68k/configs/atari_defconfig +++ b/arch/m68k/configs/atari_defconfig @@ -1,53 +1,75 @@ -CONFIG_EXPERIMENTAL=y CONFIG_LOCALVERSION="-atari" CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y +CONFIG_FHANDLE=y CONFIG_BSD_PROCESS_ACCT=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_RELAY=y +CONFIG_BSD_PROCESS_ACCT_V3=y +CONFIG_LOG_BUF_SHIFT=16 +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +# CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SLAB=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y -CONFIG_ATARI=y +CONFIG_PARTITION_ADVANCED=y +CONFIG_AMIGA_PARTITION=y +CONFIG_MAC_PARTITION=y +CONFIG_BSD_DISKLABEL=y +CONFIG_MINIX_SUBPARTITION=y +CONFIG_SOLARIS_X86_PARTITION=y +CONFIG_UNIXWARE_DISKLABEL=y +CONFIG_SUN_PARTITION=y +# CONFIG_EFI_PARTITION is not set +CONFIG_SYSV68_PARTITION=y +CONFIG_IOSCHED_DEADLINE=m CONFIG_M68020=y CONFIG_M68030=y CONFIG_M68040=y CONFIG_M68060=y +CONFIG_ATARI=y +# CONFIG_COMPACTION is not set +CONFIG_CLEANCACHE=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set CONFIG_BINFMT_AOUT=m CONFIG_BINFMT_MISC=m -CONFIG_STRAM_PROC=y -CONFIG_HEARTBEAT=y -CONFIG_PROC_HARDWARE=y CONFIG_NET=y CONFIG_PACKET=y +CONFIG_PACKET_DIAG=m CONFIG_UNIX=y +CONFIG_UNIX_DIAG=m +CONFIG_XFRM_MIGRATE=y CONFIG_NET_KEY=y -CONFIG_NET_KEY_MIGRATE=y CONFIG_INET=y CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_IP_PNP_RARP=y CONFIG_NET_IPIP=m +CONFIG_NET_IPGRE_DEMUX=m CONFIG_NET_IPGRE=m CONFIG_SYN_COOKIES=y +CONFIG_NET_IPVTI=m CONFIG_INET_AH=m CONFIG_INET_ESP=m CONFIG_INET_IPCOMP=m CONFIG_INET_XFRM_MODE_TRANSPORT=m CONFIG_INET_XFRM_MODE_TUNNEL=m CONFIG_INET_XFRM_MODE_BEET=m +# CONFIG_INET_LRO is not set CONFIG_INET_DIAG=m +CONFIG_INET_UDP_DIAG=m CONFIG_IPV6_PRIVACY=y CONFIG_IPV6_ROUTER_PREF=y -CONFIG_IPV6_ROUTE_INFO=y CONFIG_INET6_AH=m CONFIG_INET6_ESP=m CONFIG_INET6_IPCOMP=m -CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m -CONFIG_IPV6_TUNNEL=m +CONFIG_IPV6_GRE=m CONFIG_NETFILTER=y -CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NF_CONNTRACK=m +CONFIG_NF_CONNTRACK_ZONES=y +# CONFIG_NF_CONNTRACK_PROCFS is not set # CONFIG_NF_CT_PROTO_DCCP is not set CONFIG_NF_CT_PROTO_UDPLITE=m CONFIG_NF_CONNTRACK_AMANDA=m @@ -55,25 +77,37 @@ CONFIG_NF_CONNTRACK_FTP=m CONFIG_NF_CONNTRACK_H323=m CONFIG_NF_CONNTRACK_IRC=m CONFIG_NF_CONNTRACK_NETBIOS_NS=m +CONFIG_NF_CONNTRACK_SNMP=m CONFIG_NF_CONNTRACK_PPTP=m CONFIG_NF_CONNTRACK_SANE=m CONFIG_NF_CONNTRACK_SIP=m CONFIG_NF_CONNTRACK_TFTP=m +CONFIG_NETFILTER_XT_SET=m +CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m CONFIG_NETFILTER_XT_TARGET_CONNMARK=m CONFIG_NETFILTER_XT_TARGET_DSCP=m +CONFIG_NETFILTER_XT_TARGET_HMARK=m +CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m +CONFIG_NETFILTER_XT_TARGET_LOG=m CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFLOG=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m +CONFIG_NETFILTER_XT_TARGET_NOTRACK=m +CONFIG_NETFILTER_XT_TARGET_TEE=m CONFIG_NETFILTER_XT_TARGET_TRACE=m CONFIG_NETFILTER_XT_TARGET_TCPMSS=m CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m +CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m +CONFIG_NETFILTER_XT_MATCH_BPF=m CONFIG_NETFILTER_XT_MATCH_CLUSTER=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m +CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m CONFIG_NETFILTER_XT_MATCH_CONNMARK=m CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m +CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m CONFIG_NETFILTER_XT_MATCH_DSCP=m CONFIG_NETFILTER_XT_MATCH_ESP=m CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m @@ -84,6 +118,8 @@ CONFIG_NETFILTER_XT_MATCH_LIMIT=m CONFIG_NETFILTER_XT_MATCH_MAC=m CONFIG_NETFILTER_XT_MATCH_MARK=m CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m +CONFIG_NETFILTER_XT_MATCH_NFACCT=m +CONFIG_NETFILTER_XT_MATCH_OSF=m CONFIG_NETFILTER_XT_MATCH_OWNER=m CONFIG_NETFILTER_XT_MATCH_POLICY=m CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m @@ -97,22 +133,31 @@ CONFIG_NETFILTER_XT_MATCH_STRING=m CONFIG_NETFILTER_XT_MATCH_TCPMSS=m CONFIG_NETFILTER_XT_MATCH_TIME=m CONFIG_NETFILTER_XT_MATCH_U32=m +CONFIG_IP_SET=m +CONFIG_IP_SET_BITMAP_IP=m +CONFIG_IP_SET_BITMAP_IPMAC=m +CONFIG_IP_SET_BITMAP_PORT=m +CONFIG_IP_SET_HASH_IP=m +CONFIG_IP_SET_HASH_IPPORT=m +CONFIG_IP_SET_HASH_IPPORTIP=m +CONFIG_IP_SET_HASH_IPPORTNET=m +CONFIG_IP_SET_HASH_NET=m +CONFIG_IP_SET_HASH_NETPORT=m +CONFIG_IP_SET_HASH_NETIFACE=m +CONFIG_IP_SET_LIST_SET=m CONFIG_NF_CONNTRACK_IPV4=m -CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_ADDRTYPE=m CONFIG_IP_NF_MATCH_AH=m CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_RPFILTER=m CONFIG_IP_NF_MATCH_TTL=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_LOG=m CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_NF_NAT=m +CONFIG_NF_NAT_IPV4=m CONFIG_IP_NF_TARGET_MASQUERADE=m CONFIG_IP_NF_TARGET_NETMAP=m CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_NF_NAT_SNMP_BASIC=m CONFIG_IP_NF_MANGLE=m CONFIG_IP_NF_TARGET_CLUSTERIP=m CONFIG_IP_NF_TARGET_ECN=m @@ -122,7 +167,6 @@ CONFIG_IP_NF_ARPTABLES=m CONFIG_IP_NF_ARPFILTER=m CONFIG_IP_NF_ARP_MANGLE=m CONFIG_NF_CONNTRACK_IPV6=m -CONFIG_IP6_NF_QUEUE=m CONFIG_IP6_NF_IPTABLES=m CONFIG_IP6_NF_MATCH_AH=m CONFIG_IP6_NF_MATCH_EUI64=m @@ -131,18 +175,30 @@ CONFIG_IP6_NF_MATCH_OPTS=m CONFIG_IP6_NF_MATCH_HL=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m CONFIG_IP6_NF_MATCH_MH=m +CONFIG_IP6_NF_MATCH_RPFILTER=m CONFIG_IP6_NF_MATCH_RT=m CONFIG_IP6_NF_TARGET_HL=m -CONFIG_IP6_NF_TARGET_LOG=m CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_REJECT=m CONFIG_IP6_NF_MANGLE=m CONFIG_IP6_NF_RAW=m +CONFIG_NF_NAT_IPV6=m +CONFIG_IP6_NF_TARGET_MASQUERADE=m +CONFIG_IP6_NF_TARGET_NPT=m CONFIG_IP_DCCP=m # CONFIG_IP_DCCP_CCID3 is not set +CONFIG_SCTP_COOKIE_HMAC_SHA1=y +CONFIG_RDS=m +CONFIG_RDS_TCP=m +CONFIG_L2TP=m CONFIG_ATALK=m +CONFIG_BATMAN_ADV=m +CONFIG_BATMAN_ADV_DAT=y +# CONFIG_WIRELESS is not set CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y # CONFIG_FIRMWARE_IN_KERNEL is not set +# CONFIG_FW_LOADER_USER_HELPER is not set CONFIG_CONNECTOR=m CONFIG_PARPORT=m CONFIG_PARPORT_ATARI=m @@ -150,11 +206,13 @@ CONFIG_PARPORT_1284=y CONFIG_ATARI_FLOPPY=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_CRYPTOLOOP=m +CONFIG_BLK_DEV_DRBD=m CONFIG_BLK_DEV_NBD=m CONFIG_BLK_DEV_RAM=y CONFIG_CDROM_PKTCDVD=m CONFIG_ATA_OVER_ETH=m CONFIG_IDE=y +CONFIG_IDE_GD_ATAPI=y CONFIG_BLK_DEV_IDECD=y CONFIG_BLK_DEV_FALCON_IDE=y CONFIG_RAID_ATTRS=m @@ -167,63 +225,81 @@ CONFIG_BLK_DEV_SR=y CONFIG_BLK_DEV_SR_VENDOR=y CONFIG_CHR_DEV_SG=m CONFIG_SCSI_CONSTANTS=y -CONFIG_SCSI_SAS_LIBSAS=m -# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set -CONFIG_SCSI_SRP_ATTRS=m -CONFIG_SCSI_SRP_TGT_ATTRS=y +CONFIG_SCSI_SAS_ATTRS=m CONFIG_ISCSI_TCP=m +CONFIG_ISCSI_BOOT_SYSFS=m CONFIG_ATARI_SCSI=y CONFIG_MD=y -CONFIG_BLK_DEV_MD=m CONFIG_MD_LINEAR=m CONFIG_MD_RAID0=m -CONFIG_MD_RAID1=m -CONFIG_MD_RAID456=m CONFIG_BLK_DEV_DM=m CONFIG_DM_CRYPT=m CONFIG_DM_SNAPSHOT=m +CONFIG_DM_THIN_PROVISIONING=m +CONFIG_DM_CACHE=m CONFIG_DM_MIRROR=m +CONFIG_DM_RAID=m CONFIG_DM_ZERO=m CONFIG_DM_MULTIPATH=m CONFIG_DM_UEVENT=y +CONFIG_TARGET_CORE=m +CONFIG_TCM_IBLOCK=m +CONFIG_TCM_FILEIO=m +CONFIG_TCM_PSCSI=m CONFIG_NETDEVICES=y CONFIG_DUMMY=m -CONFIG_MACVLAN=m CONFIG_EQUALIZER=m -CONFIG_VETH=m -CONFIG_NET_ETHERNET=y CONFIG_MII=y +CONFIG_NET_TEAM=m +CONFIG_NET_TEAM_MODE_BROADCAST=m +CONFIG_NET_TEAM_MODE_ROUNDROBIN=m +CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m +CONFIG_NET_TEAM_MODE_LOADBALANCE=m +CONFIG_VXLAN=m +CONFIG_NETCONSOLE=m +CONFIG_NETCONSOLE_DYNAMIC=y +CONFIG_VETH=m CONFIG_ATARILANCE=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set +# CONFIG_NET_CADENCE is not set +# CONFIG_NET_VENDOR_BROADCOM is not set +# CONFIG_NET_VENDOR_INTEL is not set +# CONFIG_NET_VENDOR_MARVELL is not set +# CONFIG_NET_VENDOR_MICREL is not set +# CONFIG_NET_VENDOR_SEEQ is not set +# CONFIG_NET_VENDOR_STMICRO is not set +# CONFIG_NET_VENDOR_WIZNET is not set CONFIG_PPP=m -CONFIG_PPP_FILTER=y -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m -CONFIG_PPP_DEFLATE=m CONFIG_PPP_BSDCOMP=m +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_FILTER=y CONFIG_PPP_MPPE=m CONFIG_PPPOE=m +CONFIG_PPTP=m +CONFIG_PPPOL2TP=m +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m CONFIG_SLIP=m CONFIG_SLIP_COMPRESSED=y CONFIG_SLIP_SMART=y CONFIG_SLIP_MODE_SLIP6=y -CONFIG_NETCONSOLE=m -CONFIG_NETCONSOLE_DYNAMIC=y -CONFIG_INPUT_FF_MEMLESS=m +# CONFIG_WLAN is not set +CONFIG_INPUT_EVDEV=m CONFIG_KEYBOARD_ATARI=y # CONFIG_KEYBOARD_ATKBD is not set -CONFIG_MOUSE_PS2=m +# CONFIG_MOUSE_PS2 is not set CONFIG_MOUSE_ATARI=m CONFIG_INPUT_MISC=y CONFIG_INPUT_M68K_BEEP=m -# CONFIG_SERIO_SERPORT is not set +# CONFIG_SERIO is not set CONFIG_VT_HW_CONSOLE_BINDING=y +# CONFIG_LEGACY_PTYS is not set # CONFIG_DEVKMEM is not set CONFIG_PRINTER=m # CONFIG_HW_RANDOM is not set -CONFIG_GEN_RTC=m -CONFIG_GEN_RTC_X=y +CONFIG_NTP_PPS=y +CONFIG_PPS_CLIENT_LDISC=m +CONFIG_PPS_CLIENT_PARPORT=m +CONFIG_PTP_1588_CLOCK=m # CONFIG_HWMON is not set CONFIG_FB=y CONFIG_FB_ATARI=y @@ -233,47 +309,64 @@ CONFIG_SOUND=m CONFIG_DMASOUND_ATARI=m CONFIG_HID=m CONFIG_HIDRAW=y -# CONFIG_USB_SUPPORT is not set +CONFIG_UHID=m +CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_GENERIC=m +# CONFIG_IOMMU_SUPPORT is not set +CONFIG_HEARTBEAT=y +CONFIG_PROC_HARDWARE=y +CONFIG_NATFEAT=y +CONFIG_NFBLOCK=y +CONFIG_NFCON=y +CONFIG_NFETH=y CONFIG_ATARI_DSP56K=m CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set # CONFIG_EXT3_FS_XATTR is not set +CONFIG_EXT4_FS=y CONFIG_REISERFS_FS=m CONFIG_JFS_FS=m CONFIG_XFS_FS=m CONFIG_OCFS2_FS=m -# CONFIG_OCFS2_FS_STATS is not set # CONFIG_OCFS2_DEBUG_MASKLOG is not set +CONFIG_FANOTIFY=y CONFIG_QUOTA_NETLINK_INTERFACE=y # CONFIG_PRINT_QUOTA_WARNING is not set -CONFIG_AUTOFS_FS=m CONFIG_AUTOFS4_FS=m CONFIG_FUSE_FS=m +CONFIG_CUSE=m CONFIG_ISO9660_FS=y CONFIG_JOLIET=y CONFIG_ZISOFS=y CONFIG_UDF_FS=m -CONFIG_MSDOS_FS=y +CONFIG_MSDOS_FS=m CONFIG_VFAT_FS=m CONFIG_PROC_KCORE=y CONFIG_TMPFS=y CONFIG_AFFS_FS=m +CONFIG_ECRYPT_FS=m +CONFIG_ECRYPT_FS_MESSAGING=y CONFIG_HFS_FS=m CONFIG_HFSPLUS_FS=m CONFIG_CRAMFS=m CONFIG_SQUASHFS=m -CONFIG_MINIX_FS=y +CONFIG_SQUASHFS_LZO=y +CONFIG_MINIX_FS=m +CONFIG_OMFS_FS=m CONFIG_HPFS_FS=m +CONFIG_QNX4FS_FS=m +CONFIG_QNX6FS_FS=m CONFIG_SYSV_FS=m CONFIG_UFS_FS=m CONFIG_NFS_FS=y -CONFIG_NFS_V3=y CONFIG_NFS_V4=y +CONFIG_NFS_SWAP=y +CONFIG_ROOT_NFS=y CONFIG_NFSD=m CONFIG_NFSD_V3=y -CONFIG_SMB_FS=m -CONFIG_SMB_NLS_DEFAULT=y +CONFIG_CIFS=m +# CONFIG_CIFS_DEBUG is not set CONFIG_CODA_FS=m CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_CODEPAGE_737=m @@ -312,10 +405,23 @@ CONFIG_NLS_ISO8859_14=m CONFIG_NLS_ISO8859_15=m CONFIG_NLS_KOI8_R=m CONFIG_NLS_KOI8_U=m +CONFIG_NLS_MAC_ROMAN=m +CONFIG_NLS_MAC_CELTIC=m +CONFIG_NLS_MAC_CENTEURO=m +CONFIG_NLS_MAC_CROATIAN=m +CONFIG_NLS_MAC_CYRILLIC=m +CONFIG_NLS_MAC_GAELIC=m +CONFIG_NLS_MAC_GREEK=m +CONFIG_NLS_MAC_ICELAND=m +CONFIG_NLS_MAC_INUIT=m +CONFIG_NLS_MAC_ROMANIAN=m +CONFIG_NLS_MAC_TURKISH=m CONFIG_DLM=m CONFIG_MAGIC_SYSRQ=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_ASYNC_RAID6_TEST=m +CONFIG_ENCRYPTED_KEYS=m +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_USER=m CONFIG_CRYPTO_NULL=m CONFIG_CRYPTO_CRYPTD=m CONFIG_CRYPTO_TEST=m @@ -325,19 +431,16 @@ CONFIG_CRYPTO_CTS=m CONFIG_CRYPTO_LRW=m CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_XTS=m -CONFIG_CRYPTO_HMAC=y CONFIG_CRYPTO_XCBC=m -CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_VMAC=m CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_RMD128=m CONFIG_CRYPTO_RMD160=m CONFIG_CRYPTO_RMD256=m CONFIG_CRYPTO_RMD320=m -CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m CONFIG_CRYPTO_TGR192=m CONFIG_CRYPTO_WP512=m -CONFIG_CRYPTO_AES=m CONFIG_CRYPTO_ANUBIS=m CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_CAMELLIA=m @@ -353,6 +456,14 @@ CONFIG_CRYPTO_TWOFISH=m CONFIG_CRYPTO_ZLIB=m CONFIG_CRYPTO_LZO=m # CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_USER_API_HASH=m +CONFIG_CRYPTO_USER_API_SKCIPHER=m # CONFIG_CRYPTO_HW is not set -CONFIG_CRC16=y CONFIG_CRC_T10DIF=y +CONFIG_XZ_DEC_X86=y +CONFIG_XZ_DEC_POWERPC=y +CONFIG_XZ_DEC_IA64=y +CONFIG_XZ_DEC_ARM=y +CONFIG_XZ_DEC_ARMTHUMB=y +CONFIG_XZ_DEC_SPARC=y +CONFIG_XZ_DEC_TEST=m diff --git a/arch/m68k/configs/bvme6000_defconfig b/arch/m68k/configs/bvme6000_defconfig index 12f211733ba0..c015ddb6fd80 100644 --- a/arch/m68k/configs/bvme6000_defconfig +++ b/arch/m68k/configs/bvme6000_defconfig @@ -1,53 +1,74 @@ -CONFIG_EXPERIMENTAL=y CONFIG_LOCALVERSION="-bvme6000" CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y +CONFIG_FHANDLE=y CONFIG_BSD_PROCESS_ACCT=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_RELAY=y +CONFIG_BSD_PROCESS_ACCT_V3=y +CONFIG_LOG_BUF_SHIFT=16 +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +# CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SLAB=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y -CONFIG_VME=y -CONFIG_BVME6000=y +CONFIG_PARTITION_ADVANCED=y +CONFIG_AMIGA_PARTITION=y +CONFIG_ATARI_PARTITION=y +CONFIG_MAC_PARTITION=y +CONFIG_BSD_DISKLABEL=y +CONFIG_MINIX_SUBPARTITION=y +CONFIG_SOLARIS_X86_PARTITION=y +CONFIG_UNIXWARE_DISKLABEL=y +CONFIG_SUN_PARTITION=y +# CONFIG_EFI_PARTITION is not set +CONFIG_IOSCHED_DEADLINE=m CONFIG_M68040=y CONFIG_M68060=y +CONFIG_VME=y +CONFIG_BVME6000=y +# CONFIG_COMPACTION is not set +CONFIG_CLEANCACHE=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set CONFIG_BINFMT_AOUT=m CONFIG_BINFMT_MISC=m -CONFIG_PROC_HARDWARE=y CONFIG_NET=y CONFIG_PACKET=y +CONFIG_PACKET_DIAG=m CONFIG_UNIX=y +CONFIG_UNIX_DIAG=m +CONFIG_XFRM_MIGRATE=y CONFIG_NET_KEY=y -CONFIG_NET_KEY_MIGRATE=y CONFIG_INET=y CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y CONFIG_IP_PNP_RARP=y CONFIG_NET_IPIP=m +CONFIG_NET_IPGRE_DEMUX=m CONFIG_NET_IPGRE=m CONFIG_SYN_COOKIES=y +CONFIG_NET_IPVTI=m CONFIG_INET_AH=m CONFIG_INET_ESP=m CONFIG_INET_IPCOMP=m CONFIG_INET_XFRM_MODE_TRANSPORT=m CONFIG_INET_XFRM_MODE_TUNNEL=m CONFIG_INET_XFRM_MODE_BEET=m +# CONFIG_INET_LRO is not set CONFIG_INET_DIAG=m +CONFIG_INET_UDP_DIAG=m CONFIG_IPV6_PRIVACY=y CONFIG_IPV6_ROUTER_PREF=y -CONFIG_IPV6_ROUTE_INFO=y CONFIG_INET6_AH=m CONFIG_INET6_ESP=m CONFIG_INET6_IPCOMP=m -CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m -CONFIG_IPV6_TUNNEL=m +CONFIG_IPV6_GRE=m CONFIG_NETFILTER=y -CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NF_CONNTRACK=m +CONFIG_NF_CONNTRACK_ZONES=y +# CONFIG_NF_CONNTRACK_PROCFS is not set # CONFIG_NF_CT_PROTO_DCCP is not set CONFIG_NF_CT_PROTO_UDPLITE=m CONFIG_NF_CONNTRACK_AMANDA=m @@ -55,25 +76,37 @@ CONFIG_NF_CONNTRACK_FTP=m CONFIG_NF_CONNTRACK_H323=m CONFIG_NF_CONNTRACK_IRC=m CONFIG_NF_CONNTRACK_NETBIOS_NS=m +CONFIG_NF_CONNTRACK_SNMP=m CONFIG_NF_CONNTRACK_PPTP=m CONFIG_NF_CONNTRACK_SANE=m CONFIG_NF_CONNTRACK_SIP=m CONFIG_NF_CONNTRACK_TFTP=m +CONFIG_NETFILTER_XT_SET=m +CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m CONFIG_NETFILTER_XT_TARGET_CONNMARK=m CONFIG_NETFILTER_XT_TARGET_DSCP=m +CONFIG_NETFILTER_XT_TARGET_HMARK=m +CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m +CONFIG_NETFILTER_XT_TARGET_LOG=m CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFLOG=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m +CONFIG_NETFILTER_XT_TARGET_NOTRACK=m +CONFIG_NETFILTER_XT_TARGET_TEE=m CONFIG_NETFILTER_XT_TARGET_TRACE=m CONFIG_NETFILTER_XT_TARGET_TCPMSS=m CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m +CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m +CONFIG_NETFILTER_XT_MATCH_BPF=m CONFIG_NETFILTER_XT_MATCH_CLUSTER=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m +CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m CONFIG_NETFILTER_XT_MATCH_CONNMARK=m CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m +CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m CONFIG_NETFILTER_XT_MATCH_DSCP=m CONFIG_NETFILTER_XT_MATCH_ESP=m CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m @@ -84,6 +117,8 @@ CONFIG_NETFILTER_XT_MATCH_LIMIT=m CONFIG_NETFILTER_XT_MATCH_MAC=m CONFIG_NETFILTER_XT_MATCH_MARK=m CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m +CONFIG_NETFILTER_XT_MATCH_NFACCT=m +CONFIG_NETFILTER_XT_MATCH_OSF=m CONFIG_NETFILTER_XT_MATCH_OWNER=m CONFIG_NETFILTER_XT_MATCH_POLICY=m CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m @@ -97,22 +132,31 @@ CONFIG_NETFILTER_XT_MATCH_STRING=m CONFIG_NETFILTER_XT_MATCH_TCPMSS=m CONFIG_NETFILTER_XT_MATCH_TIME=m CONFIG_NETFILTER_XT_MATCH_U32=m +CONFIG_IP_SET=m +CONFIG_IP_SET_BITMAP_IP=m +CONFIG_IP_SET_BITMAP_IPMAC=m +CONFIG_IP_SET_BITMAP_PORT=m +CONFIG_IP_SET_HASH_IP=m +CONFIG_IP_SET_HASH_IPPORT=m +CONFIG_IP_SET_HASH_IPPORTIP=m +CONFIG_IP_SET_HASH_IPPORTNET=m +CONFIG_IP_SET_HASH_NET=m +CONFIG_IP_SET_HASH_NETPORT=m +CONFIG_IP_SET_HASH_NETIFACE=m +CONFIG_IP_SET_LIST_SET=m CONFIG_NF_CONNTRACK_IPV4=m -CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_ADDRTYPE=m CONFIG_IP_NF_MATCH_AH=m CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_RPFILTER=m CONFIG_IP_NF_MATCH_TTL=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_LOG=m CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_NF_NAT=m +CONFIG_NF_NAT_IPV4=m CONFIG_IP_NF_TARGET_MASQUERADE=m CONFIG_IP_NF_TARGET_NETMAP=m CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_NF_NAT_SNMP_BASIC=m CONFIG_IP_NF_MANGLE=m CONFIG_IP_NF_TARGET_CLUSTERIP=m CONFIG_IP_NF_TARGET_ECN=m @@ -122,7 +166,6 @@ CONFIG_IP_NF_ARPTABLES=m CONFIG_IP_NF_ARPFILTER=m CONFIG_IP_NF_ARP_MANGLE=m CONFIG_NF_CONNTRACK_IPV6=m -CONFIG_IP6_NF_QUEUE=m CONFIG_IP6_NF_IPTABLES=m CONFIG_IP6_NF_MATCH_AH=m CONFIG_IP6_NF_MATCH_EUI64=m @@ -131,21 +174,34 @@ CONFIG_IP6_NF_MATCH_OPTS=m CONFIG_IP6_NF_MATCH_HL=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m CONFIG_IP6_NF_MATCH_MH=m +CONFIG_IP6_NF_MATCH_RPFILTER=m CONFIG_IP6_NF_MATCH_RT=m CONFIG_IP6_NF_TARGET_HL=m -CONFIG_IP6_NF_TARGET_LOG=m CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_REJECT=m CONFIG_IP6_NF_MANGLE=m CONFIG_IP6_NF_RAW=m +CONFIG_NF_NAT_IPV6=m +CONFIG_IP6_NF_TARGET_MASQUERADE=m +CONFIG_IP6_NF_TARGET_NPT=m CONFIG_IP_DCCP=m # CONFIG_IP_DCCP_CCID3 is not set +CONFIG_SCTP_COOKIE_HMAC_SHA1=y +CONFIG_RDS=m +CONFIG_RDS_TCP=m +CONFIG_L2TP=m CONFIG_ATALK=m +CONFIG_BATMAN_ADV=m +CONFIG_BATMAN_ADV_DAT=y +# CONFIG_WIRELESS is not set CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y # CONFIG_FIRMWARE_IN_KERNEL is not set +# CONFIG_FW_LOADER_USER_HELPER is not set CONFIG_CONNECTOR=m CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_CRYPTOLOOP=m +CONFIG_BLK_DEV_DRBD=m CONFIG_BLK_DEV_NBD=m CONFIG_BLK_DEV_RAM=y CONFIG_CDROM_PKTCDVD=m @@ -160,103 +216,131 @@ CONFIG_BLK_DEV_SR=y CONFIG_BLK_DEV_SR_VENDOR=y CONFIG_CHR_DEV_SG=m CONFIG_SCSI_CONSTANTS=y -CONFIG_SCSI_SAS_LIBSAS=m -# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set -CONFIG_SCSI_SRP_ATTRS=m -CONFIG_SCSI_SRP_TGT_ATTRS=y +CONFIG_SCSI_SAS_ATTRS=m CONFIG_ISCSI_TCP=m +CONFIG_ISCSI_BOOT_SYSFS=m CONFIG_BVME6000_SCSI=y CONFIG_MD=y -CONFIG_BLK_DEV_MD=m CONFIG_MD_LINEAR=m CONFIG_MD_RAID0=m -CONFIG_MD_RAID1=m -CONFIG_MD_RAID456=m CONFIG_BLK_DEV_DM=m CONFIG_DM_CRYPT=m CONFIG_DM_SNAPSHOT=m +CONFIG_DM_THIN_PROVISIONING=m +CONFIG_DM_CACHE=m CONFIG_DM_MIRROR=m +CONFIG_DM_RAID=m CONFIG_DM_ZERO=m CONFIG_DM_MULTIPATH=m CONFIG_DM_UEVENT=y +CONFIG_TARGET_CORE=m +CONFIG_TCM_IBLOCK=m +CONFIG_TCM_FILEIO=m +CONFIG_TCM_PSCSI=m CONFIG_NETDEVICES=y CONFIG_DUMMY=m -CONFIG_MACVLAN=m CONFIG_EQUALIZER=m +CONFIG_NET_TEAM=m +CONFIG_NET_TEAM_MODE_BROADCAST=m +CONFIG_NET_TEAM_MODE_ROUNDROBIN=m +CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m +CONFIG_NET_TEAM_MODE_LOADBALANCE=m +CONFIG_VXLAN=m +CONFIG_NETCONSOLE=m +CONFIG_NETCONSOLE_DYNAMIC=y CONFIG_VETH=m -CONFIG_NET_ETHERNET=y +# CONFIG_NET_CADENCE is not set +# CONFIG_NET_VENDOR_BROADCOM is not set CONFIG_BVME6000_NET=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set +# CONFIG_NET_VENDOR_MARVELL is not set +# CONFIG_NET_VENDOR_MICREL is not set +# CONFIG_NET_VENDOR_NATSEMI is not set +# CONFIG_NET_VENDOR_SEEQ is not set +# CONFIG_NET_VENDOR_STMICRO is not set +# CONFIG_NET_VENDOR_WIZNET is not set CONFIG_PPP=m -CONFIG_PPP_FILTER=y -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m -CONFIG_PPP_DEFLATE=m CONFIG_PPP_BSDCOMP=m +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_FILTER=y CONFIG_PPP_MPPE=m CONFIG_PPPOE=m +CONFIG_PPTP=m +CONFIG_PPPOL2TP=m +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m CONFIG_SLIP=m CONFIG_SLIP_COMPRESSED=y CONFIG_SLIP_SMART=y CONFIG_SLIP_MODE_SLIP6=y -CONFIG_NETCONSOLE=m -CONFIG_NETCONSOLE_DYNAMIC=y -CONFIG_INPUT_FF_MEMLESS=m +# CONFIG_WLAN is not set +CONFIG_INPUT_EVDEV=m # CONFIG_KEYBOARD_ATKBD is not set -CONFIG_MOUSE_PS2=m -CONFIG_MOUSE_SERIAL=m -CONFIG_SERIO=m -# CONFIG_SERIO_SERPORT is not set +# CONFIG_MOUSE_PS2 is not set +# CONFIG_SERIO is not set CONFIG_VT_HW_CONSOLE_BINDING=y +# CONFIG_LEGACY_PTYS is not set # CONFIG_DEVKMEM is not set # CONFIG_HW_RANDOM is not set -CONFIG_GEN_RTC=m -CONFIG_GEN_RTC_X=y +CONFIG_NTP_PPS=y +CONFIG_PPS_CLIENT_LDISC=m +CONFIG_PTP_1588_CLOCK=m # CONFIG_HWMON is not set CONFIG_HID=m CONFIG_HIDRAW=y +CONFIG_UHID=m +# CONFIG_HID_GENERIC is not set # CONFIG_USB_SUPPORT is not set +CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_GENERIC=m +# CONFIG_IOMMU_SUPPORT is not set +CONFIG_PROC_HARDWARE=y CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set # CONFIG_EXT3_FS_XATTR is not set +CONFIG_EXT4_FS=y CONFIG_REISERFS_FS=m CONFIG_JFS_FS=m CONFIG_XFS_FS=m CONFIG_OCFS2_FS=m -# CONFIG_OCFS2_FS_STATS is not set # CONFIG_OCFS2_DEBUG_MASKLOG is not set +CONFIG_FANOTIFY=y CONFIG_QUOTA_NETLINK_INTERFACE=y # CONFIG_PRINT_QUOTA_WARNING is not set -CONFIG_AUTOFS_FS=m CONFIG_AUTOFS4_FS=m CONFIG_FUSE_FS=m +CONFIG_CUSE=m CONFIG_ISO9660_FS=y CONFIG_JOLIET=y CONFIG_ZISOFS=y CONFIG_UDF_FS=m -CONFIG_MSDOS_FS=y +CONFIG_MSDOS_FS=m CONFIG_VFAT_FS=m CONFIG_PROC_KCORE=y CONFIG_TMPFS=y CONFIG_AFFS_FS=m +CONFIG_ECRYPT_FS=m +CONFIG_ECRYPT_FS_MESSAGING=y CONFIG_HFS_FS=m CONFIG_HFSPLUS_FS=m CONFIG_CRAMFS=m CONFIG_SQUASHFS=m -CONFIG_MINIX_FS=y +CONFIG_SQUASHFS_LZO=y +CONFIG_MINIX_FS=m +CONFIG_OMFS_FS=m CONFIG_HPFS_FS=m +CONFIG_QNX4FS_FS=m +CONFIG_QNX6FS_FS=m CONFIG_SYSV_FS=m CONFIG_UFS_FS=m CONFIG_NFS_FS=y -CONFIG_NFS_V3=y CONFIG_NFS_V4=y +CONFIG_NFS_SWAP=y CONFIG_ROOT_NFS=y CONFIG_NFSD=m CONFIG_NFSD_V3=y -CONFIG_SMB_FS=m -CONFIG_SMB_NLS_DEFAULT=y +CONFIG_CIFS=m +# CONFIG_CIFS_DEBUG is not set CONFIG_CODA_FS=m CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_CODEPAGE_737=m @@ -295,10 +379,23 @@ CONFIG_NLS_ISO8859_14=m CONFIG_NLS_ISO8859_15=m CONFIG_NLS_KOI8_R=m CONFIG_NLS_KOI8_U=m +CONFIG_NLS_MAC_ROMAN=m +CONFIG_NLS_MAC_CELTIC=m +CONFIG_NLS_MAC_CENTEURO=m +CONFIG_NLS_MAC_CROATIAN=m +CONFIG_NLS_MAC_CYRILLIC=m +CONFIG_NLS_MAC_GAELIC=m +CONFIG_NLS_MAC_GREEK=m +CONFIG_NLS_MAC_ICELAND=m +CONFIG_NLS_MAC_INUIT=m +CONFIG_NLS_MAC_ROMANIAN=m +CONFIG_NLS_MAC_TURKISH=m CONFIG_DLM=m CONFIG_MAGIC_SYSRQ=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_ASYNC_RAID6_TEST=m +CONFIG_ENCRYPTED_KEYS=m +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_USER=m CONFIG_CRYPTO_NULL=m CONFIG_CRYPTO_CRYPTD=m CONFIG_CRYPTO_TEST=m @@ -308,19 +405,16 @@ CONFIG_CRYPTO_CTS=m CONFIG_CRYPTO_LRW=m CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_XTS=m -CONFIG_CRYPTO_HMAC=y CONFIG_CRYPTO_XCBC=m -CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_VMAC=m CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_RMD128=m CONFIG_CRYPTO_RMD160=m CONFIG_CRYPTO_RMD256=m CONFIG_CRYPTO_RMD320=m -CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m CONFIG_CRYPTO_TGR192=m CONFIG_CRYPTO_WP512=m -CONFIG_CRYPTO_AES=m CONFIG_CRYPTO_ANUBIS=m CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_CAMELLIA=m @@ -336,7 +430,14 @@ CONFIG_CRYPTO_TWOFISH=m CONFIG_CRYPTO_ZLIB=m CONFIG_CRYPTO_LZO=m # CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_USER_API_HASH=m +CONFIG_CRYPTO_USER_API_SKCIPHER=m # CONFIG_CRYPTO_HW is not set -CONFIG_CRC16=m CONFIG_CRC_T10DIF=y -CONFIG_CRC32=m +CONFIG_XZ_DEC_X86=y +CONFIG_XZ_DEC_POWERPC=y +CONFIG_XZ_DEC_IA64=y +CONFIG_XZ_DEC_ARM=y +CONFIG_XZ_DEC_ARMTHUMB=y +CONFIG_XZ_DEC_SPARC=y +CONFIG_XZ_DEC_TEST=m diff --git a/arch/m68k/configs/hp300_defconfig b/arch/m68k/configs/hp300_defconfig index 215389a5407f..ec7382d8afff 100644 --- a/arch/m68k/configs/hp300_defconfig +++ b/arch/m68k/configs/hp300_defconfig @@ -1,54 +1,76 @@ -CONFIG_EXPERIMENTAL=y CONFIG_LOCALVERSION="-hp300" CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y +CONFIG_FHANDLE=y CONFIG_BSD_PROCESS_ACCT=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_RELAY=y +CONFIG_BSD_PROCESS_ACCT_V3=y +CONFIG_LOG_BUF_SHIFT=16 +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +# CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SLAB=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y -CONFIG_HP300=y +CONFIG_PARTITION_ADVANCED=y +CONFIG_AMIGA_PARTITION=y +CONFIG_ATARI_PARTITION=y +CONFIG_MAC_PARTITION=y +CONFIG_BSD_DISKLABEL=y +CONFIG_MINIX_SUBPARTITION=y +CONFIG_SOLARIS_X86_PARTITION=y +CONFIG_UNIXWARE_DISKLABEL=y +CONFIG_SUN_PARTITION=y +# CONFIG_EFI_PARTITION is not set +CONFIG_SYSV68_PARTITION=y +CONFIG_IOSCHED_DEADLINE=m CONFIG_M68020=y CONFIG_M68030=y CONFIG_M68040=y CONFIG_M68060=y +CONFIG_HP300=y +# CONFIG_COMPACTION is not set +CONFIG_CLEANCACHE=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set CONFIG_BINFMT_AOUT=m CONFIG_BINFMT_MISC=m -CONFIG_PROC_HARDWARE=y CONFIG_NET=y CONFIG_PACKET=y +CONFIG_PACKET_DIAG=m CONFIG_UNIX=y +CONFIG_UNIX_DIAG=m +CONFIG_XFRM_MIGRATE=y CONFIG_NET_KEY=y -CONFIG_NET_KEY_MIGRATE=y CONFIG_INET=y CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y CONFIG_IP_PNP_RARP=y CONFIG_NET_IPIP=m +CONFIG_NET_IPGRE_DEMUX=m CONFIG_NET_IPGRE=m CONFIG_SYN_COOKIES=y +CONFIG_NET_IPVTI=m CONFIG_INET_AH=m CONFIG_INET_ESP=m CONFIG_INET_IPCOMP=m CONFIG_INET_XFRM_MODE_TRANSPORT=m CONFIG_INET_XFRM_MODE_TUNNEL=m CONFIG_INET_XFRM_MODE_BEET=m +# CONFIG_INET_LRO is not set CONFIG_INET_DIAG=m +CONFIG_INET_UDP_DIAG=m CONFIG_IPV6_PRIVACY=y CONFIG_IPV6_ROUTER_PREF=y -CONFIG_IPV6_ROUTE_INFO=y CONFIG_INET6_AH=m CONFIG_INET6_ESP=m CONFIG_INET6_IPCOMP=m -CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m -CONFIG_IPV6_TUNNEL=m +CONFIG_IPV6_GRE=m CONFIG_NETFILTER=y -CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NF_CONNTRACK=m +CONFIG_NF_CONNTRACK_ZONES=y +# CONFIG_NF_CONNTRACK_PROCFS is not set # CONFIG_NF_CT_PROTO_DCCP is not set CONFIG_NF_CT_PROTO_UDPLITE=m CONFIG_NF_CONNTRACK_AMANDA=m @@ -56,25 +78,37 @@ CONFIG_NF_CONNTRACK_FTP=m CONFIG_NF_CONNTRACK_H323=m CONFIG_NF_CONNTRACK_IRC=m CONFIG_NF_CONNTRACK_NETBIOS_NS=m +CONFIG_NF_CONNTRACK_SNMP=m CONFIG_NF_CONNTRACK_PPTP=m CONFIG_NF_CONNTRACK_SANE=m CONFIG_NF_CONNTRACK_SIP=m CONFIG_NF_CONNTRACK_TFTP=m +CONFIG_NETFILTER_XT_SET=m +CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m CONFIG_NETFILTER_XT_TARGET_CONNMARK=m CONFIG_NETFILTER_XT_TARGET_DSCP=m +CONFIG_NETFILTER_XT_TARGET_HMARK=m +CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m +CONFIG_NETFILTER_XT_TARGET_LOG=m CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFLOG=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m +CONFIG_NETFILTER_XT_TARGET_NOTRACK=m +CONFIG_NETFILTER_XT_TARGET_TEE=m CONFIG_NETFILTER_XT_TARGET_TRACE=m CONFIG_NETFILTER_XT_TARGET_TCPMSS=m CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m +CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m +CONFIG_NETFILTER_XT_MATCH_BPF=m CONFIG_NETFILTER_XT_MATCH_CLUSTER=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m +CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m CONFIG_NETFILTER_XT_MATCH_CONNMARK=m CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m +CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m CONFIG_NETFILTER_XT_MATCH_DSCP=m CONFIG_NETFILTER_XT_MATCH_ESP=m CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m @@ -85,6 +119,8 @@ CONFIG_NETFILTER_XT_MATCH_LIMIT=m CONFIG_NETFILTER_XT_MATCH_MAC=m CONFIG_NETFILTER_XT_MATCH_MARK=m CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m +CONFIG_NETFILTER_XT_MATCH_NFACCT=m +CONFIG_NETFILTER_XT_MATCH_OSF=m CONFIG_NETFILTER_XT_MATCH_OWNER=m CONFIG_NETFILTER_XT_MATCH_POLICY=m CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m @@ -98,22 +134,31 @@ CONFIG_NETFILTER_XT_MATCH_STRING=m CONFIG_NETFILTER_XT_MATCH_TCPMSS=m CONFIG_NETFILTER_XT_MATCH_TIME=m CONFIG_NETFILTER_XT_MATCH_U32=m +CONFIG_IP_SET=m +CONFIG_IP_SET_BITMAP_IP=m +CONFIG_IP_SET_BITMAP_IPMAC=m +CONFIG_IP_SET_BITMAP_PORT=m +CONFIG_IP_SET_HASH_IP=m +CONFIG_IP_SET_HASH_IPPORT=m +CONFIG_IP_SET_HASH_IPPORTIP=m +CONFIG_IP_SET_HASH_IPPORTNET=m +CONFIG_IP_SET_HASH_NET=m +CONFIG_IP_SET_HASH_NETPORT=m +CONFIG_IP_SET_HASH_NETIFACE=m +CONFIG_IP_SET_LIST_SET=m CONFIG_NF_CONNTRACK_IPV4=m -CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_ADDRTYPE=m CONFIG_IP_NF_MATCH_AH=m CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_RPFILTER=m CONFIG_IP_NF_MATCH_TTL=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_LOG=m CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_NF_NAT=m +CONFIG_NF_NAT_IPV4=m CONFIG_IP_NF_TARGET_MASQUERADE=m CONFIG_IP_NF_TARGET_NETMAP=m CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_NF_NAT_SNMP_BASIC=m CONFIG_IP_NF_MANGLE=m CONFIG_IP_NF_TARGET_CLUSTERIP=m CONFIG_IP_NF_TARGET_ECN=m @@ -123,7 +168,6 @@ CONFIG_IP_NF_ARPTABLES=m CONFIG_IP_NF_ARPFILTER=m CONFIG_IP_NF_ARP_MANGLE=m CONFIG_NF_CONNTRACK_IPV6=m -CONFIG_IP6_NF_QUEUE=m CONFIG_IP6_NF_IPTABLES=m CONFIG_IP6_NF_MATCH_AH=m CONFIG_IP6_NF_MATCH_EUI64=m @@ -132,21 +176,34 @@ CONFIG_IP6_NF_MATCH_OPTS=m CONFIG_IP6_NF_MATCH_HL=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m CONFIG_IP6_NF_MATCH_MH=m +CONFIG_IP6_NF_MATCH_RPFILTER=m CONFIG_IP6_NF_MATCH_RT=m CONFIG_IP6_NF_TARGET_HL=m -CONFIG_IP6_NF_TARGET_LOG=m CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_REJECT=m CONFIG_IP6_NF_MANGLE=m CONFIG_IP6_NF_RAW=m +CONFIG_NF_NAT_IPV6=m +CONFIG_IP6_NF_TARGET_MASQUERADE=m +CONFIG_IP6_NF_TARGET_NPT=m CONFIG_IP_DCCP=m # CONFIG_IP_DCCP_CCID3 is not set +CONFIG_SCTP_COOKIE_HMAC_SHA1=y +CONFIG_RDS=m +CONFIG_RDS_TCP=m +CONFIG_L2TP=m CONFIG_ATALK=m +CONFIG_BATMAN_ADV=m +CONFIG_BATMAN_ADV_DAT=y +# CONFIG_WIRELESS is not set CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y # CONFIG_FIRMWARE_IN_KERNEL is not set +# CONFIG_FW_LOADER_USER_HELPER is not set CONFIG_CONNECTOR=m CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_CRYPTOLOOP=m +CONFIG_BLK_DEV_DRBD=m CONFIG_BLK_DEV_NBD=m CONFIG_BLK_DEV_RAM=y CONFIG_CDROM_PKTCDVD=m @@ -161,59 +218,77 @@ CONFIG_BLK_DEV_SR=y CONFIG_BLK_DEV_SR_VENDOR=y CONFIG_CHR_DEV_SG=m CONFIG_SCSI_CONSTANTS=y -CONFIG_SCSI_SAS_LIBSAS=m -# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set -CONFIG_SCSI_SRP_ATTRS=m -CONFIG_SCSI_SRP_TGT_ATTRS=y +CONFIG_SCSI_SAS_ATTRS=m CONFIG_ISCSI_TCP=m +CONFIG_ISCSI_BOOT_SYSFS=m CONFIG_MD=y -CONFIG_BLK_DEV_MD=m CONFIG_MD_LINEAR=m CONFIG_MD_RAID0=m -CONFIG_MD_RAID1=m -CONFIG_MD_RAID456=m CONFIG_BLK_DEV_DM=m CONFIG_DM_CRYPT=m CONFIG_DM_SNAPSHOT=m +CONFIG_DM_THIN_PROVISIONING=m +CONFIG_DM_CACHE=m CONFIG_DM_MIRROR=m +CONFIG_DM_RAID=m CONFIG_DM_ZERO=m CONFIG_DM_MULTIPATH=m CONFIG_DM_UEVENT=y +CONFIG_TARGET_CORE=m +CONFIG_TCM_IBLOCK=m +CONFIG_TCM_FILEIO=m +CONFIG_TCM_PSCSI=m CONFIG_NETDEVICES=y CONFIG_DUMMY=m -CONFIG_MACVLAN=m CONFIG_EQUALIZER=m +CONFIG_NET_TEAM=m +CONFIG_NET_TEAM_MODE_BROADCAST=m +CONFIG_NET_TEAM_MODE_ROUNDROBIN=m +CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m +CONFIG_NET_TEAM_MODE_LOADBALANCE=m +CONFIG_VXLAN=m +CONFIG_NETCONSOLE=m +CONFIG_NETCONSOLE_DYNAMIC=y CONFIG_VETH=m -CONFIG_NET_ETHERNET=y CONFIG_HPLANCE=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set +# CONFIG_NET_CADENCE is not set +# CONFIG_NET_VENDOR_BROADCOM is not set +# CONFIG_NET_VENDOR_INTEL is not set +# CONFIG_NET_VENDOR_MARVELL is not set +# CONFIG_NET_VENDOR_MICREL is not set +# CONFIG_NET_VENDOR_NATSEMI is not set +# CONFIG_NET_VENDOR_SEEQ is not set +# CONFIG_NET_VENDOR_STMICRO is not set +# CONFIG_NET_VENDOR_WIZNET is not set CONFIG_PPP=m -CONFIG_PPP_FILTER=y -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m -CONFIG_PPP_DEFLATE=m CONFIG_PPP_BSDCOMP=m +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_FILTER=y CONFIG_PPP_MPPE=m CONFIG_PPPOE=m +CONFIG_PPTP=m +CONFIG_PPPOL2TP=m +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m CONFIG_SLIP=m CONFIG_SLIP_COMPRESSED=y CONFIG_SLIP_SMART=y CONFIG_SLIP_MODE_SLIP6=y -CONFIG_NETCONSOLE=m -CONFIG_NETCONSOLE_DYNAMIC=y -CONFIG_INPUT_FF_MEMLESS=m +# CONFIG_WLAN is not set +CONFIG_INPUT_EVDEV=m # CONFIG_KEYBOARD_ATKBD is not set -CONFIG_MOUSE_PS2=m +# CONFIG_MOUSE_PS2 is not set CONFIG_MOUSE_SERIAL=m CONFIG_INPUT_MISC=y CONFIG_HP_SDC_RTC=m -# CONFIG_SERIO_SERPORT is not set +CONFIG_SERIO_SERPORT=m CONFIG_VT_HW_CONSOLE_BINDING=y +# CONFIG_LEGACY_PTYS is not set # CONFIG_DEVKMEM is not set # CONFIG_HW_RANDOM is not set -CONFIG_GEN_RTC=m -CONFIG_GEN_RTC_X=y +CONFIG_NTP_PPS=y +CONFIG_PPS_CLIENT_LDISC=m +CONFIG_PTP_1588_CLOCK=m # CONFIG_HWMON is not set CONFIG_FB=y CONFIG_FRAMEBUFFER_CONSOLE=y @@ -222,47 +297,60 @@ CONFIG_LOGO=y # CONFIG_LOGO_LINUX_VGA16 is not set CONFIG_HID=m CONFIG_HIDRAW=y +CONFIG_UHID=m +# CONFIG_HID_GENERIC is not set # CONFIG_USB_SUPPORT is not set +CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_GENERIC=m +# CONFIG_IOMMU_SUPPORT is not set +CONFIG_PROC_HARDWARE=y CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set # CONFIG_EXT3_FS_XATTR is not set +CONFIG_EXT4_FS=y CONFIG_REISERFS_FS=m CONFIG_JFS_FS=m CONFIG_XFS_FS=m CONFIG_OCFS2_FS=m -# CONFIG_OCFS2_FS_STATS is not set # CONFIG_OCFS2_DEBUG_MASKLOG is not set +CONFIG_FANOTIFY=y CONFIG_QUOTA_NETLINK_INTERFACE=y # CONFIG_PRINT_QUOTA_WARNING is not set -CONFIG_AUTOFS_FS=m CONFIG_AUTOFS4_FS=m CONFIG_FUSE_FS=m +CONFIG_CUSE=m CONFIG_ISO9660_FS=y CONFIG_JOLIET=y CONFIG_ZISOFS=y CONFIG_UDF_FS=m -CONFIG_MSDOS_FS=y +CONFIG_MSDOS_FS=m CONFIG_VFAT_FS=m CONFIG_PROC_KCORE=y CONFIG_TMPFS=y CONFIG_AFFS_FS=m +CONFIG_ECRYPT_FS=m +CONFIG_ECRYPT_FS_MESSAGING=y CONFIG_HFS_FS=m CONFIG_HFSPLUS_FS=m CONFIG_CRAMFS=m CONFIG_SQUASHFS=m -CONFIG_MINIX_FS=y +CONFIG_SQUASHFS_LZO=y +CONFIG_MINIX_FS=m +CONFIG_OMFS_FS=m CONFIG_HPFS_FS=m +CONFIG_QNX4FS_FS=m +CONFIG_QNX6FS_FS=m CONFIG_SYSV_FS=m CONFIG_UFS_FS=m CONFIG_NFS_FS=y -CONFIG_NFS_V3=y CONFIG_NFS_V4=y +CONFIG_NFS_SWAP=y CONFIG_ROOT_NFS=y CONFIG_NFSD=m CONFIG_NFSD_V3=y -CONFIG_SMB_FS=m -CONFIG_SMB_NLS_DEFAULT=y +CONFIG_CIFS=m +# CONFIG_CIFS_DEBUG is not set CONFIG_CODA_FS=m CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_CODEPAGE_737=m @@ -301,10 +389,23 @@ CONFIG_NLS_ISO8859_14=m CONFIG_NLS_ISO8859_15=m CONFIG_NLS_KOI8_R=m CONFIG_NLS_KOI8_U=m +CONFIG_NLS_MAC_ROMAN=m +CONFIG_NLS_MAC_CELTIC=m +CONFIG_NLS_MAC_CENTEURO=m +CONFIG_NLS_MAC_CROATIAN=m +CONFIG_NLS_MAC_CYRILLIC=m +CONFIG_NLS_MAC_GAELIC=m +CONFIG_NLS_MAC_GREEK=m +CONFIG_NLS_MAC_ICELAND=m +CONFIG_NLS_MAC_INUIT=m +CONFIG_NLS_MAC_ROMANIAN=m +CONFIG_NLS_MAC_TURKISH=m CONFIG_DLM=m CONFIG_MAGIC_SYSRQ=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_ASYNC_RAID6_TEST=m +CONFIG_ENCRYPTED_KEYS=m +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_USER=m CONFIG_CRYPTO_NULL=m CONFIG_CRYPTO_CRYPTD=m CONFIG_CRYPTO_TEST=m @@ -314,19 +415,16 @@ CONFIG_CRYPTO_CTS=m CONFIG_CRYPTO_LRW=m CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_XTS=m -CONFIG_CRYPTO_HMAC=y CONFIG_CRYPTO_XCBC=m -CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_VMAC=m CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_RMD128=m CONFIG_CRYPTO_RMD160=m CONFIG_CRYPTO_RMD256=m CONFIG_CRYPTO_RMD320=m -CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m CONFIG_CRYPTO_TGR192=m CONFIG_CRYPTO_WP512=m -CONFIG_CRYPTO_AES=m CONFIG_CRYPTO_ANUBIS=m CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_CAMELLIA=m @@ -342,6 +440,14 @@ CONFIG_CRYPTO_TWOFISH=m CONFIG_CRYPTO_ZLIB=m CONFIG_CRYPTO_LZO=m # CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_USER_API_HASH=m +CONFIG_CRYPTO_USER_API_SKCIPHER=m # CONFIG_CRYPTO_HW is not set -CONFIG_CRC16=m CONFIG_CRC_T10DIF=y +CONFIG_XZ_DEC_X86=y +CONFIG_XZ_DEC_POWERPC=y +CONFIG_XZ_DEC_IA64=y +CONFIG_XZ_DEC_ARM=y +CONFIG_XZ_DEC_ARMTHUMB=y +CONFIG_XZ_DEC_SPARC=y +CONFIG_XZ_DEC_TEST=m diff --git a/arch/m68k/configs/mac_defconfig b/arch/m68k/configs/mac_defconfig index cb9dfb30b674..7d46fbec7042 100644 --- a/arch/m68k/configs/mac_defconfig +++ b/arch/m68k/configs/mac_defconfig @@ -1,49 +1,75 @@ -CONFIG_EXPERIMENTAL=y CONFIG_LOCALVERSION="-mac" CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y +CONFIG_FHANDLE=y CONFIG_BSD_PROCESS_ACCT=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_RELAY=y +CONFIG_BSD_PROCESS_ACCT_V3=y +CONFIG_LOG_BUF_SHIFT=16 +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +# CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SLAB=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y -CONFIG_MAC=y +CONFIG_PARTITION_ADVANCED=y +CONFIG_AMIGA_PARTITION=y +CONFIG_ATARI_PARTITION=y +CONFIG_BSD_DISKLABEL=y +CONFIG_MINIX_SUBPARTITION=y +CONFIG_SOLARIS_X86_PARTITION=y +CONFIG_UNIXWARE_DISKLABEL=y +CONFIG_SUN_PARTITION=y +# CONFIG_EFI_PARTITION is not set +CONFIG_SYSV68_PARTITION=y +CONFIG_IOSCHED_DEADLINE=m CONFIG_M68020=y CONFIG_M68030=y CONFIG_M68040=y +CONFIG_M68KFPU_EMU=y +CONFIG_MAC=y +# CONFIG_COMPACTION is not set +CONFIG_CLEANCACHE=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set CONFIG_BINFMT_AOUT=m CONFIG_BINFMT_MISC=m -CONFIG_PROC_HARDWARE=y CONFIG_NET=y CONFIG_PACKET=y +CONFIG_PACKET_DIAG=m CONFIG_UNIX=y +CONFIG_UNIX_DIAG=m +CONFIG_XFRM_MIGRATE=y CONFIG_NET_KEY=y -CONFIG_NET_KEY_MIGRATE=y CONFIG_INET=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_IP_PNP_RARP=y CONFIG_NET_IPIP=m +CONFIG_NET_IPGRE_DEMUX=m CONFIG_NET_IPGRE=m CONFIG_SYN_COOKIES=y +CONFIG_NET_IPVTI=m CONFIG_INET_AH=m CONFIG_INET_ESP=m CONFIG_INET_IPCOMP=m CONFIG_INET_XFRM_MODE_TRANSPORT=m CONFIG_INET_XFRM_MODE_TUNNEL=m CONFIG_INET_XFRM_MODE_BEET=m +# CONFIG_INET_LRO is not set CONFIG_INET_DIAG=m +CONFIG_INET_UDP_DIAG=m CONFIG_IPV6_PRIVACY=y CONFIG_IPV6_ROUTER_PREF=y -CONFIG_IPV6_ROUTE_INFO=y CONFIG_INET6_AH=m CONFIG_INET6_ESP=m CONFIG_INET6_IPCOMP=m -CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m -CONFIG_IPV6_TUNNEL=m +CONFIG_IPV6_GRE=m CONFIG_NETFILTER=y -CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NF_CONNTRACK=m +CONFIG_NF_CONNTRACK_ZONES=y +# CONFIG_NF_CONNTRACK_PROCFS is not set # CONFIG_NF_CT_PROTO_DCCP is not set CONFIG_NF_CT_PROTO_UDPLITE=m CONFIG_NF_CONNTRACK_AMANDA=m @@ -51,25 +77,37 @@ CONFIG_NF_CONNTRACK_FTP=m CONFIG_NF_CONNTRACK_H323=m CONFIG_NF_CONNTRACK_IRC=m CONFIG_NF_CONNTRACK_NETBIOS_NS=m +CONFIG_NF_CONNTRACK_SNMP=m CONFIG_NF_CONNTRACK_PPTP=m CONFIG_NF_CONNTRACK_SANE=m CONFIG_NF_CONNTRACK_SIP=m CONFIG_NF_CONNTRACK_TFTP=m +CONFIG_NETFILTER_XT_SET=m +CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m CONFIG_NETFILTER_XT_TARGET_CONNMARK=m CONFIG_NETFILTER_XT_TARGET_DSCP=m +CONFIG_NETFILTER_XT_TARGET_HMARK=m +CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m +CONFIG_NETFILTER_XT_TARGET_LOG=m CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFLOG=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m +CONFIG_NETFILTER_XT_TARGET_NOTRACK=m +CONFIG_NETFILTER_XT_TARGET_TEE=m CONFIG_NETFILTER_XT_TARGET_TRACE=m CONFIG_NETFILTER_XT_TARGET_TCPMSS=m CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m +CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m +CONFIG_NETFILTER_XT_MATCH_BPF=m CONFIG_NETFILTER_XT_MATCH_CLUSTER=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m +CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m CONFIG_NETFILTER_XT_MATCH_CONNMARK=m CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m +CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m CONFIG_NETFILTER_XT_MATCH_DSCP=m CONFIG_NETFILTER_XT_MATCH_ESP=m CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m @@ -80,6 +118,8 @@ CONFIG_NETFILTER_XT_MATCH_LIMIT=m CONFIG_NETFILTER_XT_MATCH_MAC=m CONFIG_NETFILTER_XT_MATCH_MARK=m CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m +CONFIG_NETFILTER_XT_MATCH_NFACCT=m +CONFIG_NETFILTER_XT_MATCH_OSF=m CONFIG_NETFILTER_XT_MATCH_OWNER=m CONFIG_NETFILTER_XT_MATCH_POLICY=m CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m @@ -93,22 +133,31 @@ CONFIG_NETFILTER_XT_MATCH_STRING=m CONFIG_NETFILTER_XT_MATCH_TCPMSS=m CONFIG_NETFILTER_XT_MATCH_TIME=m CONFIG_NETFILTER_XT_MATCH_U32=m +CONFIG_IP_SET=m +CONFIG_IP_SET_BITMAP_IP=m +CONFIG_IP_SET_BITMAP_IPMAC=m +CONFIG_IP_SET_BITMAP_PORT=m +CONFIG_IP_SET_HASH_IP=m +CONFIG_IP_SET_HASH_IPPORT=m +CONFIG_IP_SET_HASH_IPPORTIP=m +CONFIG_IP_SET_HASH_IPPORTNET=m +CONFIG_IP_SET_HASH_NET=m +CONFIG_IP_SET_HASH_NETPORT=m +CONFIG_IP_SET_HASH_NETIFACE=m +CONFIG_IP_SET_LIST_SET=m CONFIG_NF_CONNTRACK_IPV4=m -CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_ADDRTYPE=m CONFIG_IP_NF_MATCH_AH=m CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_RPFILTER=m CONFIG_IP_NF_MATCH_TTL=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_LOG=m CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_NF_NAT=m +CONFIG_NF_NAT_IPV4=m CONFIG_IP_NF_TARGET_MASQUERADE=m CONFIG_IP_NF_TARGET_NETMAP=m CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_NF_NAT_SNMP_BASIC=m CONFIG_IP_NF_MANGLE=m CONFIG_IP_NF_TARGET_CLUSTERIP=m CONFIG_IP_NF_TARGET_ECN=m @@ -118,7 +167,6 @@ CONFIG_IP_NF_ARPTABLES=m CONFIG_IP_NF_ARPFILTER=m CONFIG_IP_NF_ARP_MANGLE=m CONFIG_NF_CONNTRACK_IPV6=m -CONFIG_IP6_NF_QUEUE=m CONFIG_IP6_NF_IPTABLES=m CONFIG_IP6_NF_MATCH_AH=m CONFIG_IP6_NF_MATCH_EUI64=m @@ -127,31 +175,45 @@ CONFIG_IP6_NF_MATCH_OPTS=m CONFIG_IP6_NF_MATCH_HL=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m CONFIG_IP6_NF_MATCH_MH=m +CONFIG_IP6_NF_MATCH_RPFILTER=m CONFIG_IP6_NF_MATCH_RT=m CONFIG_IP6_NF_TARGET_HL=m -CONFIG_IP6_NF_TARGET_LOG=m CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_REJECT=m CONFIG_IP6_NF_MANGLE=m CONFIG_IP6_NF_RAW=m +CONFIG_NF_NAT_IPV6=m +CONFIG_IP6_NF_TARGET_MASQUERADE=m +CONFIG_IP6_NF_TARGET_NPT=m CONFIG_IP_DCCP=m # CONFIG_IP_DCCP_CCID3 is not set +CONFIG_SCTP_COOKIE_HMAC_SHA1=y +CONFIG_RDS=m +CONFIG_RDS_TCP=m +CONFIG_L2TP=m CONFIG_ATALK=m CONFIG_DEV_APPLETALK=m CONFIG_IPDDP=m CONFIG_IPDDP_ENCAP=y CONFIG_IPDDP_DECAP=y +CONFIG_BATMAN_ADV=m +CONFIG_BATMAN_ADV_DAT=y +# CONFIG_WIRELESS is not set CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y # CONFIG_FIRMWARE_IN_KERNEL is not set +# CONFIG_FW_LOADER_USER_HELPER is not set CONFIG_CONNECTOR=m -CONFIG_BLK_DEV_SWIM=y +CONFIG_BLK_DEV_SWIM=m CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_CRYPTOLOOP=m +CONFIG_BLK_DEV_DRBD=m CONFIG_BLK_DEV_NBD=m CONFIG_BLK_DEV_RAM=y CONFIG_CDROM_PKTCDVD=m CONFIG_ATA_OVER_ETH=m CONFIG_IDE=y +CONFIG_IDE_GD_ATAPI=y CONFIG_BLK_DEV_IDECD=y CONFIG_BLK_DEV_MAC_IDE=y CONFIG_RAID_ATTRS=m @@ -164,29 +226,30 @@ CONFIG_BLK_DEV_SR=y CONFIG_BLK_DEV_SR_VENDOR=y CONFIG_CHR_DEV_SG=m CONFIG_SCSI_CONSTANTS=y -CONFIG_SCSI_SAS_LIBSAS=m -# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set -CONFIG_SCSI_SRP_ATTRS=m -CONFIG_SCSI_SRP_TGT_ATTRS=y +CONFIG_SCSI_SAS_ATTRS=m CONFIG_ISCSI_TCP=m +CONFIG_ISCSI_BOOT_SYSFS=m CONFIG_MAC_SCSI=y CONFIG_SCSI_MAC_ESP=y CONFIG_MD=y -CONFIG_BLK_DEV_MD=m CONFIG_MD_LINEAR=m CONFIG_MD_RAID0=m -CONFIG_MD_RAID1=m -CONFIG_MD_RAID456=m CONFIG_BLK_DEV_DM=m CONFIG_DM_CRYPT=m CONFIG_DM_SNAPSHOT=m +CONFIG_DM_THIN_PROVISIONING=m +CONFIG_DM_CACHE=m CONFIG_DM_MIRROR=m +CONFIG_DM_RAID=m CONFIG_DM_ZERO=m CONFIG_DM_MULTIPATH=m CONFIG_DM_UEVENT=y +CONFIG_TARGET_CORE=m +CONFIG_TCM_IBLOCK=m +CONFIG_TCM_FILEIO=m +CONFIG_TCM_PSCSI=m CONFIG_ADB=y CONFIG_ADB_MACII=y -CONFIG_ADB_MACIISI=y CONFIG_ADB_IOP=y CONFIG_ADB_PMU68K=y CONFIG_ADB_CUDA=y @@ -194,46 +257,61 @@ CONFIG_INPUT_ADBHID=y CONFIG_MAC_EMUMOUSEBTN=y CONFIG_NETDEVICES=y CONFIG_DUMMY=m -CONFIG_MACVLAN=m CONFIG_EQUALIZER=m +CONFIG_NET_TEAM=m +CONFIG_NET_TEAM_MODE_BROADCAST=m +CONFIG_NET_TEAM_MODE_ROUNDROBIN=m +CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m +CONFIG_NET_TEAM_MODE_LOADBALANCE=m +CONFIG_VXLAN=m +CONFIG_NETCONSOLE=m +CONFIG_NETCONSOLE_DYNAMIC=y CONFIG_VETH=m -CONFIG_NET_ETHERNET=y -CONFIG_MAC8390=y -CONFIG_MAC89x0=m -CONFIG_MACSONIC=m CONFIG_MACMACE=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set +# CONFIG_NET_CADENCE is not set +# CONFIG_NET_VENDOR_BROADCOM is not set +CONFIG_MAC89x0=y +# CONFIG_NET_VENDOR_INTEL is not set +# CONFIG_NET_VENDOR_MARVELL is not set +# CONFIG_NET_VENDOR_MICREL is not set +CONFIG_MACSONIC=y +CONFIG_MAC8390=y +# CONFIG_NET_VENDOR_SEEQ is not set +# CONFIG_NET_VENDOR_SMSC is not set +# CONFIG_NET_VENDOR_STMICRO is not set +# CONFIG_NET_VENDOR_WIZNET is not set CONFIG_PPP=m -CONFIG_PPP_FILTER=y -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m -CONFIG_PPP_DEFLATE=m CONFIG_PPP_BSDCOMP=m +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_FILTER=y CONFIG_PPP_MPPE=m CONFIG_PPPOE=m +CONFIG_PPTP=m +CONFIG_PPPOL2TP=m +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m CONFIG_SLIP=m CONFIG_SLIP_COMPRESSED=y CONFIG_SLIP_SMART=y CONFIG_SLIP_MODE_SLIP6=y -CONFIG_NETCONSOLE=m -CONFIG_NETCONSOLE_DYNAMIC=y -CONFIG_INPUT_FF_MEMLESS=m +# CONFIG_WLAN is not set +CONFIG_INPUT_EVDEV=m # CONFIG_KEYBOARD_ATKBD is not set -CONFIG_MOUSE_PS2=m +# CONFIG_MOUSE_PS2 is not set CONFIG_MOUSE_SERIAL=m CONFIG_INPUT_MISC=y CONFIG_INPUT_M68K_BEEP=m CONFIG_SERIO=m -# CONFIG_SERIO_SERPORT is not set CONFIG_VT_HW_CONSOLE_BINDING=y +# CONFIG_LEGACY_PTYS is not set # CONFIG_DEVKMEM is not set CONFIG_SERIAL_PMACZILOG=y CONFIG_SERIAL_PMACZILOG_TTYS=y CONFIG_SERIAL_PMACZILOG_CONSOLE=y # CONFIG_HW_RANDOM is not set -CONFIG_GEN_RTC=m -CONFIG_GEN_RTC_X=y +CONFIG_NTP_PPS=y +CONFIG_PPS_CLIENT_LDISC=m +CONFIG_PTP_1588_CLOCK=m # CONFIG_HWMON is not set CONFIG_FB=y CONFIG_FB_VALKYRIE=y @@ -242,46 +320,60 @@ CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_LOGO=y CONFIG_HID=m CONFIG_HIDRAW=y +CONFIG_UHID=m +# CONFIG_HID_GENERIC is not set # CONFIG_USB_SUPPORT is not set +CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_GENERIC=m +# CONFIG_IOMMU_SUPPORT is not set +CONFIG_PROC_HARDWARE=y CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set # CONFIG_EXT3_FS_XATTR is not set +CONFIG_EXT4_FS=y CONFIG_REISERFS_FS=m CONFIG_JFS_FS=m CONFIG_XFS_FS=m CONFIG_OCFS2_FS=m -# CONFIG_OCFS2_FS_STATS is not set # CONFIG_OCFS2_DEBUG_MASKLOG is not set +CONFIG_FANOTIFY=y CONFIG_QUOTA_NETLINK_INTERFACE=y # CONFIG_PRINT_QUOTA_WARNING is not set -CONFIG_AUTOFS_FS=m CONFIG_AUTOFS4_FS=m CONFIG_FUSE_FS=m +CONFIG_CUSE=m CONFIG_ISO9660_FS=y CONFIG_JOLIET=y CONFIG_ZISOFS=y CONFIG_UDF_FS=m -CONFIG_MSDOS_FS=y +CONFIG_MSDOS_FS=m CONFIG_VFAT_FS=m CONFIG_PROC_KCORE=y CONFIG_TMPFS=y CONFIG_AFFS_FS=m -CONFIG_HFS_FS=y -CONFIG_HFSPLUS_FS=y +CONFIG_ECRYPT_FS=m +CONFIG_ECRYPT_FS_MESSAGING=y +CONFIG_HFS_FS=m +CONFIG_HFSPLUS_FS=m CONFIG_CRAMFS=m CONFIG_SQUASHFS=m -CONFIG_MINIX_FS=y +CONFIG_SQUASHFS_LZO=y +CONFIG_MINIX_FS=m +CONFIG_OMFS_FS=m CONFIG_HPFS_FS=m +CONFIG_QNX4FS_FS=m +CONFIG_QNX6FS_FS=m CONFIG_SYSV_FS=m CONFIG_UFS_FS=m -CONFIG_NFS_FS=m -CONFIG_NFS_V3=y +CONFIG_NFS_FS=y CONFIG_NFS_V4=y +CONFIG_NFS_SWAP=y +CONFIG_ROOT_NFS=y CONFIG_NFSD=m CONFIG_NFSD_V3=y -CONFIG_SMB_FS=m -CONFIG_SMB_NLS_DEFAULT=y +CONFIG_CIFS=m +# CONFIG_CIFS_DEBUG is not set CONFIG_CODA_FS=m CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_CODEPAGE_737=m @@ -320,10 +412,23 @@ CONFIG_NLS_ISO8859_14=m CONFIG_NLS_ISO8859_15=m CONFIG_NLS_KOI8_R=m CONFIG_NLS_KOI8_U=m +CONFIG_NLS_MAC_ROMAN=m +CONFIG_NLS_MAC_CELTIC=m +CONFIG_NLS_MAC_CENTEURO=m +CONFIG_NLS_MAC_CROATIAN=m +CONFIG_NLS_MAC_CYRILLIC=m +CONFIG_NLS_MAC_GAELIC=m +CONFIG_NLS_MAC_GREEK=m +CONFIG_NLS_MAC_ICELAND=m +CONFIG_NLS_MAC_INUIT=m +CONFIG_NLS_MAC_ROMANIAN=m +CONFIG_NLS_MAC_TURKISH=m CONFIG_DLM=m CONFIG_MAGIC_SYSRQ=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_ASYNC_RAID6_TEST=m +CONFIG_ENCRYPTED_KEYS=m +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_USER=m CONFIG_CRYPTO_NULL=m CONFIG_CRYPTO_CRYPTD=m CONFIG_CRYPTO_TEST=m @@ -333,19 +438,16 @@ CONFIG_CRYPTO_CTS=m CONFIG_CRYPTO_LRW=m CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_XTS=m -CONFIG_CRYPTO_HMAC=y CONFIG_CRYPTO_XCBC=m -CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_VMAC=m CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_RMD128=m CONFIG_CRYPTO_RMD160=m CONFIG_CRYPTO_RMD256=m CONFIG_CRYPTO_RMD320=m -CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m CONFIG_CRYPTO_TGR192=m CONFIG_CRYPTO_WP512=m -CONFIG_CRYPTO_AES=m CONFIG_CRYPTO_ANUBIS=m CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_CAMELLIA=m @@ -361,6 +463,14 @@ CONFIG_CRYPTO_TWOFISH=m CONFIG_CRYPTO_ZLIB=m CONFIG_CRYPTO_LZO=m # CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_USER_API_HASH=m +CONFIG_CRYPTO_USER_API_SKCIPHER=m # CONFIG_CRYPTO_HW is not set -CONFIG_CRC16=m CONFIG_CRC_T10DIF=y +CONFIG_XZ_DEC_X86=y +CONFIG_XZ_DEC_POWERPC=y +CONFIG_XZ_DEC_IA64=y +CONFIG_XZ_DEC_ARM=y +CONFIG_XZ_DEC_ARMTHUMB=y +CONFIG_XZ_DEC_SPARC=y +CONFIG_XZ_DEC_TEST=m diff --git a/arch/m68k/configs/multi_defconfig b/arch/m68k/configs/multi_defconfig index 8d5def4a31e0..0f795d8e65fa 100644 --- a/arch/m68k/configs/multi_defconfig +++ b/arch/m68k/configs/multi_defconfig @@ -1,15 +1,29 @@ -CONFIG_EXPERIMENTAL=y CONFIG_LOCALVERSION="-multi" CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y +CONFIG_FHANDLE=y CONFIG_BSD_PROCESS_ACCT=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_RELAY=y +CONFIG_BSD_PROCESS_ACCT_V3=y +CONFIG_LOG_BUF_SHIFT=16 +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +# CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SLAB=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y +CONFIG_PARTITION_ADVANCED=y +CONFIG_BSD_DISKLABEL=y +CONFIG_MINIX_SUBPARTITION=y +CONFIG_SOLARIS_X86_PARTITION=y +CONFIG_UNIXWARE_DISKLABEL=y +# CONFIG_EFI_PARTITION is not set +CONFIG_IOSCHED_DEADLINE=m +CONFIG_M68020=y +CONFIG_M68040=y +CONFIG_M68060=y +CONFIG_M68KFPU_EMU=y CONFIG_AMIGA=y CONFIG_ATARI=y CONFIG_MAC=y @@ -21,48 +35,50 @@ CONFIG_BVME6000=y CONFIG_HP300=y CONFIG_SUN3X=y CONFIG_Q40=y -CONFIG_M68020=y -CONFIG_M68040=y -CONFIG_M68060=y -CONFIG_BINFMT_AOUT=m -CONFIG_BINFMT_MISC=m CONFIG_ZORRO=y CONFIG_AMIGA_PCMCIA=y -CONFIG_STRAM_PROC=y -CONFIG_HEARTBEAT=y -CONFIG_PROC_HARDWARE=y CONFIG_ZORRO_NAMES=y +# CONFIG_COMPACTION is not set +CONFIG_CLEANCACHE=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_BINFMT_AOUT=m +CONFIG_BINFMT_MISC=m CONFIG_NET=y CONFIG_PACKET=y +CONFIG_PACKET_DIAG=m CONFIG_UNIX=y +CONFIG_UNIX_DIAG=m +CONFIG_XFRM_MIGRATE=y CONFIG_NET_KEY=y -CONFIG_NET_KEY_MIGRATE=y CONFIG_INET=y CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y CONFIG_IP_PNP_RARP=y CONFIG_NET_IPIP=m +CONFIG_NET_IPGRE_DEMUX=m CONFIG_NET_IPGRE=m CONFIG_SYN_COOKIES=y +CONFIG_NET_IPVTI=m CONFIG_INET_AH=m CONFIG_INET_ESP=m CONFIG_INET_IPCOMP=m CONFIG_INET_XFRM_MODE_TRANSPORT=m CONFIG_INET_XFRM_MODE_TUNNEL=m CONFIG_INET_XFRM_MODE_BEET=m +# CONFIG_INET_LRO is not set CONFIG_INET_DIAG=m +CONFIG_INET_UDP_DIAG=m CONFIG_IPV6_PRIVACY=y CONFIG_IPV6_ROUTER_PREF=y -CONFIG_IPV6_ROUTE_INFO=y CONFIG_INET6_AH=m CONFIG_INET6_ESP=m CONFIG_INET6_IPCOMP=m -CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m -CONFIG_IPV6_TUNNEL=m +CONFIG_IPV6_GRE=m CONFIG_NETFILTER=y -CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NF_CONNTRACK=m +CONFIG_NF_CONNTRACK_ZONES=y +# CONFIG_NF_CONNTRACK_PROCFS is not set # CONFIG_NF_CT_PROTO_DCCP is not set CONFIG_NF_CT_PROTO_UDPLITE=m CONFIG_NF_CONNTRACK_AMANDA=m @@ -70,25 +86,37 @@ CONFIG_NF_CONNTRACK_FTP=m CONFIG_NF_CONNTRACK_H323=m CONFIG_NF_CONNTRACK_IRC=m CONFIG_NF_CONNTRACK_NETBIOS_NS=m +CONFIG_NF_CONNTRACK_SNMP=m CONFIG_NF_CONNTRACK_PPTP=m CONFIG_NF_CONNTRACK_SANE=m CONFIG_NF_CONNTRACK_SIP=m CONFIG_NF_CONNTRACK_TFTP=m +CONFIG_NETFILTER_XT_SET=m +CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m CONFIG_NETFILTER_XT_TARGET_CONNMARK=m CONFIG_NETFILTER_XT_TARGET_DSCP=m +CONFIG_NETFILTER_XT_TARGET_HMARK=m +CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m +CONFIG_NETFILTER_XT_TARGET_LOG=m CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFLOG=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m +CONFIG_NETFILTER_XT_TARGET_NOTRACK=m +CONFIG_NETFILTER_XT_TARGET_TEE=m CONFIG_NETFILTER_XT_TARGET_TRACE=m CONFIG_NETFILTER_XT_TARGET_TCPMSS=m CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m +CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m +CONFIG_NETFILTER_XT_MATCH_BPF=m CONFIG_NETFILTER_XT_MATCH_CLUSTER=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m +CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m CONFIG_NETFILTER_XT_MATCH_CONNMARK=m CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m +CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m CONFIG_NETFILTER_XT_MATCH_DSCP=m CONFIG_NETFILTER_XT_MATCH_ESP=m CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m @@ -99,6 +127,8 @@ CONFIG_NETFILTER_XT_MATCH_LIMIT=m CONFIG_NETFILTER_XT_MATCH_MAC=m CONFIG_NETFILTER_XT_MATCH_MARK=m CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m +CONFIG_NETFILTER_XT_MATCH_NFACCT=m +CONFIG_NETFILTER_XT_MATCH_OSF=m CONFIG_NETFILTER_XT_MATCH_OWNER=m CONFIG_NETFILTER_XT_MATCH_POLICY=m CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m @@ -112,22 +142,31 @@ CONFIG_NETFILTER_XT_MATCH_STRING=m CONFIG_NETFILTER_XT_MATCH_TCPMSS=m CONFIG_NETFILTER_XT_MATCH_TIME=m CONFIG_NETFILTER_XT_MATCH_U32=m +CONFIG_IP_SET=m +CONFIG_IP_SET_BITMAP_IP=m +CONFIG_IP_SET_BITMAP_IPMAC=m +CONFIG_IP_SET_BITMAP_PORT=m +CONFIG_IP_SET_HASH_IP=m +CONFIG_IP_SET_HASH_IPPORT=m +CONFIG_IP_SET_HASH_IPPORTIP=m +CONFIG_IP_SET_HASH_IPPORTNET=m +CONFIG_IP_SET_HASH_NET=m +CONFIG_IP_SET_HASH_NETPORT=m +CONFIG_IP_SET_HASH_NETIFACE=m +CONFIG_IP_SET_LIST_SET=m CONFIG_NF_CONNTRACK_IPV4=m -CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_ADDRTYPE=m CONFIG_IP_NF_MATCH_AH=m CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_RPFILTER=m CONFIG_IP_NF_MATCH_TTL=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_LOG=m CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_NF_NAT=m +CONFIG_NF_NAT_IPV4=m CONFIG_IP_NF_TARGET_MASQUERADE=m CONFIG_IP_NF_TARGET_NETMAP=m CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_NF_NAT_SNMP_BASIC=m CONFIG_IP_NF_MANGLE=m CONFIG_IP_NF_TARGET_CLUSTERIP=m CONFIG_IP_NF_TARGET_ECN=m @@ -137,7 +176,6 @@ CONFIG_IP_NF_ARPTABLES=m CONFIG_IP_NF_ARPFILTER=m CONFIG_IP_NF_ARP_MANGLE=m CONFIG_NF_CONNTRACK_IPV6=m -CONFIG_IP6_NF_QUEUE=m CONFIG_IP6_NF_IPTABLES=m CONFIG_IP6_NF_MATCH_AH=m CONFIG_IP6_NF_MATCH_EUI64=m @@ -146,22 +184,34 @@ CONFIG_IP6_NF_MATCH_OPTS=m CONFIG_IP6_NF_MATCH_HL=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m CONFIG_IP6_NF_MATCH_MH=m +CONFIG_IP6_NF_MATCH_RPFILTER=m CONFIG_IP6_NF_MATCH_RT=m CONFIG_IP6_NF_TARGET_HL=m -CONFIG_IP6_NF_TARGET_LOG=m CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_REJECT=m CONFIG_IP6_NF_MANGLE=m CONFIG_IP6_NF_RAW=m +CONFIG_NF_NAT_IPV6=m +CONFIG_IP6_NF_TARGET_MASQUERADE=m +CONFIG_IP6_NF_TARGET_NPT=m CONFIG_IP_DCCP=m # CONFIG_IP_DCCP_CCID3 is not set +CONFIG_SCTP_COOKIE_HMAC_SHA1=y +CONFIG_RDS=m +CONFIG_RDS_TCP=m +CONFIG_L2TP=m CONFIG_ATALK=m CONFIG_DEV_APPLETALK=m CONFIG_IPDDP=m CONFIG_IPDDP_ENCAP=y CONFIG_IPDDP_DECAP=y +CONFIG_BATMAN_ADV=m +CONFIG_BATMAN_ADV_DAT=y +# CONFIG_WIRELESS is not set CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y # CONFIG_FIRMWARE_IN_KERNEL is not set +# CONFIG_FW_LOADER_USER_HELPER is not set CONFIG_CONNECTOR=m CONFIG_PARPORT=m CONFIG_PARPORT_AMIGA=m @@ -170,15 +220,17 @@ CONFIG_PARPORT_ATARI=m CONFIG_PARPORT_1284=y CONFIG_AMIGA_FLOPPY=y CONFIG_ATARI_FLOPPY=y -CONFIG_BLK_DEV_SWIM=y +CONFIG_BLK_DEV_SWIM=m CONFIG_AMIGA_Z2RAM=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_CRYPTOLOOP=m +CONFIG_BLK_DEV_DRBD=m CONFIG_BLK_DEV_NBD=m CONFIG_BLK_DEV_RAM=y CONFIG_CDROM_PKTCDVD=m CONFIG_ATA_OVER_ETH=m CONFIG_IDE=y +CONFIG_IDE_GD_ATAPI=y CONFIG_BLK_DEV_IDECD=y CONFIG_BLK_DEV_GAYLE=y CONFIG_BLK_DEV_BUDDHA=y @@ -195,11 +247,9 @@ CONFIG_BLK_DEV_SR=y CONFIG_BLK_DEV_SR_VENDOR=y CONFIG_CHR_DEV_SG=m CONFIG_SCSI_CONSTANTS=y -CONFIG_SCSI_SAS_LIBSAS=m -# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set -CONFIG_SCSI_SRP_ATTRS=m -CONFIG_SCSI_SRP_TGT_ATTRS=y +CONFIG_SCSI_SAS_ATTRS=m CONFIG_ISCSI_TCP=m +CONFIG_ISCSI_BOOT_SYSFS=m CONFIG_A3000_SCSI=y CONFIG_A2091_SCSI=y CONFIG_GVP11_SCSI=y @@ -213,21 +263,24 @@ CONFIG_MVME16x_SCSI=y CONFIG_BVME6000_SCSI=y CONFIG_SUN3X_ESP=y CONFIG_MD=y -CONFIG_BLK_DEV_MD=m CONFIG_MD_LINEAR=m CONFIG_MD_RAID0=m -CONFIG_MD_RAID1=m -CONFIG_MD_RAID456=m CONFIG_BLK_DEV_DM=m CONFIG_DM_CRYPT=m CONFIG_DM_SNAPSHOT=m +CONFIG_DM_THIN_PROVISIONING=m +CONFIG_DM_CACHE=m CONFIG_DM_MIRROR=m +CONFIG_DM_RAID=m CONFIG_DM_ZERO=m CONFIG_DM_MULTIPATH=m CONFIG_DM_UEVENT=y +CONFIG_TARGET_CORE=m +CONFIG_TCM_IBLOCK=m +CONFIG_TCM_FILEIO=m +CONFIG_TCM_PSCSI=m CONFIG_ADB=y CONFIG_ADB_MACII=y -CONFIG_ADB_MACIISI=y CONFIG_ADB_IOP=y CONFIG_ADB_PMU68K=y CONFIG_ADB_CUDA=y @@ -235,49 +288,64 @@ CONFIG_INPUT_ADBHID=y CONFIG_MAC_EMUMOUSEBTN=y CONFIG_NETDEVICES=y CONFIG_DUMMY=m -CONFIG_MACVLAN=m CONFIG_EQUALIZER=m -CONFIG_VETH=m -CONFIG_NET_ETHERNET=y CONFIG_MII=y -CONFIG_ARIADNE=y +CONFIG_NET_TEAM=m +CONFIG_NET_TEAM_MODE_BROADCAST=m +CONFIG_NET_TEAM_MODE_ROUNDROBIN=m +CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m +CONFIG_NET_TEAM_MODE_LOADBALANCE=m +CONFIG_VXLAN=m +CONFIG_NETCONSOLE=m +CONFIG_NETCONSOLE_DYNAMIC=y +CONFIG_VETH=m +# CONFIG_NET_VENDOR_3COM is not set CONFIG_A2065=y -CONFIG_HYDRA=y -CONFIG_ZORRO8390=y -CONFIG_APNE=y -CONFIG_MAC8390=y -CONFIG_MAC89x0=y -CONFIG_MACSONIC=y -CONFIG_MACMACE=y -CONFIG_MVME147_NET=y -CONFIG_MVME16x_NET=y -CONFIG_BVME6000_NET=y +CONFIG_ARIADNE=y CONFIG_ATARILANCE=y -CONFIG_SUN3LANCE=y CONFIG_HPLANCE=y +CONFIG_MVME147_NET=y +CONFIG_SUN3LANCE=y +CONFIG_MACMACE=y +# CONFIG_NET_CADENCE is not set +# CONFIG_NET_VENDOR_BROADCOM is not set +CONFIG_MAC89x0=y +# CONFIG_NET_VENDOR_FUJITSU is not set +# CONFIG_NET_VENDOR_HP is not set +CONFIG_BVME6000_NET=y +CONFIG_MVME16x_NET=y +# CONFIG_NET_VENDOR_MARVELL is not set +# CONFIG_NET_VENDOR_MICREL is not set +CONFIG_MACSONIC=y +CONFIG_HYDRA=y +CONFIG_MAC8390=y CONFIG_NE2000=m -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set +CONFIG_APNE=y +CONFIG_ZORRO8390=y +# CONFIG_NET_VENDOR_SEEQ is not set +# CONFIG_NET_VENDOR_STMICRO is not set +# CONFIG_NET_VENDOR_WIZNET is not set CONFIG_PPP=m -CONFIG_PPP_FILTER=y -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m -CONFIG_PPP_DEFLATE=m CONFIG_PPP_BSDCOMP=m +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_FILTER=y CONFIG_PPP_MPPE=m CONFIG_PPPOE=m +CONFIG_PPTP=m +CONFIG_PPPOL2TP=m +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m CONFIG_SLIP=m CONFIG_SLIP_COMPRESSED=y CONFIG_SLIP_SMART=y CONFIG_SLIP_MODE_SLIP6=y -CONFIG_NETCONSOLE=m -CONFIG_NETCONSOLE_DYNAMIC=y -CONFIG_INPUT_FF_MEMLESS=m +# CONFIG_WLAN is not set +CONFIG_INPUT_EVDEV=m CONFIG_KEYBOARD_AMIGA=y CONFIG_KEYBOARD_ATARI=y # CONFIG_KEYBOARD_ATKBD is not set CONFIG_KEYBOARD_SUNKBD=y -CONFIG_MOUSE_PS2=m +# CONFIG_MOUSE_PS2 is not set CONFIG_MOUSE_SERIAL=m CONFIG_MOUSE_AMIGA=m CONFIG_MOUSE_ATARI=m @@ -285,18 +353,20 @@ CONFIG_INPUT_JOYSTICK=y CONFIG_JOYSTICK_AMIGA=m CONFIG_INPUT_MISC=y CONFIG_INPUT_M68K_BEEP=m -CONFIG_HP_SDC_RTC=y -# CONFIG_SERIO_SERPORT is not set +CONFIG_HP_SDC_RTC=m CONFIG_SERIO_Q40KBD=y CONFIG_VT_HW_CONSOLE_BINDING=y +# CONFIG_LEGACY_PTYS is not set # CONFIG_DEVKMEM is not set CONFIG_SERIAL_PMACZILOG=y CONFIG_SERIAL_PMACZILOG_TTYS=y CONFIG_SERIAL_PMACZILOG_CONSOLE=y CONFIG_PRINTER=m # CONFIG_HW_RANDOM is not set -CONFIG_GEN_RTC=y -CONFIG_GEN_RTC_X=y +CONFIG_NTP_PPS=y +CONFIG_PPS_CLIENT_LDISC=m +CONFIG_PPS_CLIENT_PARPORT=m +CONFIG_PTP_1588_CLOCK=m # CONFIG_HWMON is not set CONFIG_FB=y CONFIG_FB_CIRRUS=y @@ -316,7 +386,20 @@ CONFIG_DMASOUND_PAULA=m CONFIG_DMASOUND_Q40=m CONFIG_HID=m CONFIG_HIDRAW=y +CONFIG_UHID=m +# CONFIG_HID_GENERIC is not set # CONFIG_USB_SUPPORT is not set +CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_MSM6242=m +CONFIG_RTC_DRV_RP5C01=m +CONFIG_RTC_DRV_GENERIC=m +# CONFIG_IOMMU_SUPPORT is not set +CONFIG_HEARTBEAT=y +CONFIG_PROC_HARDWARE=y +CONFIG_NATFEAT=y +CONFIG_NFBLOCK=y +CONFIG_NFCON=y +CONFIG_NFETH=y CONFIG_ATARI_DSP56K=m CONFIG_AMIGA_BUILTIN_SERIAL=y CONFIG_SERIAL_CONSOLE=y @@ -324,42 +407,49 @@ CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set # CONFIG_EXT3_FS_XATTR is not set +CONFIG_EXT4_FS=y CONFIG_REISERFS_FS=m CONFIG_JFS_FS=m CONFIG_XFS_FS=m CONFIG_OCFS2_FS=m -# CONFIG_OCFS2_FS_STATS is not set # CONFIG_OCFS2_DEBUG_MASKLOG is not set +CONFIG_FANOTIFY=y CONFIG_QUOTA_NETLINK_INTERFACE=y # CONFIG_PRINT_QUOTA_WARNING is not set -CONFIG_AUTOFS_FS=m CONFIG_AUTOFS4_FS=m CONFIG_FUSE_FS=m +CONFIG_CUSE=m CONFIG_ISO9660_FS=y CONFIG_JOLIET=y CONFIG_ZISOFS=y CONFIG_UDF_FS=m -CONFIG_MSDOS_FS=y +CONFIG_MSDOS_FS=m CONFIG_VFAT_FS=m CONFIG_PROC_KCORE=y CONFIG_TMPFS=y CONFIG_AFFS_FS=m -CONFIG_HFS_FS=y -CONFIG_HFSPLUS_FS=y +CONFIG_ECRYPT_FS=m +CONFIG_ECRYPT_FS_MESSAGING=y +CONFIG_HFS_FS=m +CONFIG_HFSPLUS_FS=m CONFIG_CRAMFS=m CONFIG_SQUASHFS=m -CONFIG_MINIX_FS=y +CONFIG_SQUASHFS_LZO=y +CONFIG_MINIX_FS=m +CONFIG_OMFS_FS=m CONFIG_HPFS_FS=m +CONFIG_QNX4FS_FS=m +CONFIG_QNX6FS_FS=m CONFIG_SYSV_FS=m CONFIG_UFS_FS=m CONFIG_NFS_FS=y -CONFIG_NFS_V3=y CONFIG_NFS_V4=y +CONFIG_NFS_SWAP=y CONFIG_ROOT_NFS=y CONFIG_NFSD=m CONFIG_NFSD_V3=y -CONFIG_SMB_FS=m -CONFIG_SMB_NLS_DEFAULT=y +CONFIG_CIFS=m +# CONFIG_CIFS_DEBUG is not set CONFIG_CODA_FS=m CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_CODEPAGE_737=m @@ -398,10 +488,23 @@ CONFIG_NLS_ISO8859_14=m CONFIG_NLS_ISO8859_15=m CONFIG_NLS_KOI8_R=m CONFIG_NLS_KOI8_U=m +CONFIG_NLS_MAC_ROMAN=m +CONFIG_NLS_MAC_CELTIC=m +CONFIG_NLS_MAC_CENTEURO=m +CONFIG_NLS_MAC_CROATIAN=m +CONFIG_NLS_MAC_CYRILLIC=m +CONFIG_NLS_MAC_GAELIC=m +CONFIG_NLS_MAC_GREEK=m +CONFIG_NLS_MAC_ICELAND=m +CONFIG_NLS_MAC_INUIT=m +CONFIG_NLS_MAC_ROMANIAN=m +CONFIG_NLS_MAC_TURKISH=m CONFIG_DLM=m CONFIG_MAGIC_SYSRQ=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_ASYNC_RAID6_TEST=m +CONFIG_ENCRYPTED_KEYS=m +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_USER=m CONFIG_CRYPTO_NULL=m CONFIG_CRYPTO_CRYPTD=m CONFIG_CRYPTO_TEST=m @@ -411,19 +514,16 @@ CONFIG_CRYPTO_CTS=m CONFIG_CRYPTO_LRW=m CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_XTS=m -CONFIG_CRYPTO_HMAC=y CONFIG_CRYPTO_XCBC=m -CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_VMAC=m CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_RMD128=m CONFIG_CRYPTO_RMD160=m CONFIG_CRYPTO_RMD256=m CONFIG_CRYPTO_RMD320=m -CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m CONFIG_CRYPTO_TGR192=m CONFIG_CRYPTO_WP512=m -CONFIG_CRYPTO_AES=m CONFIG_CRYPTO_ANUBIS=m CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_CAMELLIA=m @@ -439,6 +539,14 @@ CONFIG_CRYPTO_TWOFISH=m CONFIG_CRYPTO_ZLIB=m CONFIG_CRYPTO_LZO=m # CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_USER_API_HASH=m +CONFIG_CRYPTO_USER_API_SKCIPHER=m # CONFIG_CRYPTO_HW is not set -CONFIG_CRC16=y CONFIG_CRC_T10DIF=y +CONFIG_XZ_DEC_X86=y +CONFIG_XZ_DEC_POWERPC=y +CONFIG_XZ_DEC_IA64=y +CONFIG_XZ_DEC_ARM=y +CONFIG_XZ_DEC_ARMTHUMB=y +CONFIG_XZ_DEC_SPARC=y +CONFIG_XZ_DEC_TEST=m diff --git a/arch/m68k/configs/mvme147_defconfig b/arch/m68k/configs/mvme147_defconfig index e2af46f530c1..5586c6529fce 100644 --- a/arch/m68k/configs/mvme147_defconfig +++ b/arch/m68k/configs/mvme147_defconfig @@ -1,52 +1,73 @@ -CONFIG_EXPERIMENTAL=y CONFIG_LOCALVERSION="-mvme147" CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y +CONFIG_FHANDLE=y CONFIG_BSD_PROCESS_ACCT=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_RELAY=y +CONFIG_BSD_PROCESS_ACCT_V3=y +CONFIG_LOG_BUF_SHIFT=16 +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +# CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SLAB=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y +CONFIG_PARTITION_ADVANCED=y +CONFIG_AMIGA_PARTITION=y +CONFIG_ATARI_PARTITION=y +CONFIG_MAC_PARTITION=y +CONFIG_BSD_DISKLABEL=y +CONFIG_MINIX_SUBPARTITION=y +CONFIG_SOLARIS_X86_PARTITION=y +CONFIG_UNIXWARE_DISKLABEL=y +CONFIG_SUN_PARTITION=y +# CONFIG_EFI_PARTITION is not set +CONFIG_IOSCHED_DEADLINE=m +CONFIG_M68030=y CONFIG_VME=y CONFIG_MVME147=y -CONFIG_M68030=y +# CONFIG_COMPACTION is not set +CONFIG_CLEANCACHE=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set CONFIG_BINFMT_AOUT=m CONFIG_BINFMT_MISC=m -CONFIG_PROC_HARDWARE=y CONFIG_NET=y CONFIG_PACKET=y +CONFIG_PACKET_DIAG=m CONFIG_UNIX=y +CONFIG_UNIX_DIAG=m +CONFIG_XFRM_MIGRATE=y CONFIG_NET_KEY=y -CONFIG_NET_KEY_MIGRATE=y CONFIG_INET=y CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y CONFIG_IP_PNP_RARP=y CONFIG_NET_IPIP=m +CONFIG_NET_IPGRE_DEMUX=m CONFIG_NET_IPGRE=m CONFIG_SYN_COOKIES=y +CONFIG_NET_IPVTI=m CONFIG_INET_AH=m CONFIG_INET_ESP=m CONFIG_INET_IPCOMP=m CONFIG_INET_XFRM_MODE_TRANSPORT=m CONFIG_INET_XFRM_MODE_TUNNEL=m CONFIG_INET_XFRM_MODE_BEET=m +# CONFIG_INET_LRO is not set CONFIG_INET_DIAG=m +CONFIG_INET_UDP_DIAG=m CONFIG_IPV6_PRIVACY=y CONFIG_IPV6_ROUTER_PREF=y -CONFIG_IPV6_ROUTE_INFO=y CONFIG_INET6_AH=m CONFIG_INET6_ESP=m CONFIG_INET6_IPCOMP=m -CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m -CONFIG_IPV6_TUNNEL=m +CONFIG_IPV6_GRE=m CONFIG_NETFILTER=y -CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NF_CONNTRACK=m +CONFIG_NF_CONNTRACK_ZONES=y +# CONFIG_NF_CONNTRACK_PROCFS is not set # CONFIG_NF_CT_PROTO_DCCP is not set CONFIG_NF_CT_PROTO_UDPLITE=m CONFIG_NF_CONNTRACK_AMANDA=m @@ -54,25 +75,37 @@ CONFIG_NF_CONNTRACK_FTP=m CONFIG_NF_CONNTRACK_H323=m CONFIG_NF_CONNTRACK_IRC=m CONFIG_NF_CONNTRACK_NETBIOS_NS=m +CONFIG_NF_CONNTRACK_SNMP=m CONFIG_NF_CONNTRACK_PPTP=m CONFIG_NF_CONNTRACK_SANE=m CONFIG_NF_CONNTRACK_SIP=m CONFIG_NF_CONNTRACK_TFTP=m +CONFIG_NETFILTER_XT_SET=m +CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m CONFIG_NETFILTER_XT_TARGET_CONNMARK=m CONFIG_NETFILTER_XT_TARGET_DSCP=m +CONFIG_NETFILTER_XT_TARGET_HMARK=m +CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m +CONFIG_NETFILTER_XT_TARGET_LOG=m CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFLOG=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m +CONFIG_NETFILTER_XT_TARGET_NOTRACK=m +CONFIG_NETFILTER_XT_TARGET_TEE=m CONFIG_NETFILTER_XT_TARGET_TRACE=m CONFIG_NETFILTER_XT_TARGET_TCPMSS=m CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m +CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m +CONFIG_NETFILTER_XT_MATCH_BPF=m CONFIG_NETFILTER_XT_MATCH_CLUSTER=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m +CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m CONFIG_NETFILTER_XT_MATCH_CONNMARK=m CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m +CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m CONFIG_NETFILTER_XT_MATCH_DSCP=m CONFIG_NETFILTER_XT_MATCH_ESP=m CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m @@ -83,6 +116,8 @@ CONFIG_NETFILTER_XT_MATCH_LIMIT=m CONFIG_NETFILTER_XT_MATCH_MAC=m CONFIG_NETFILTER_XT_MATCH_MARK=m CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m +CONFIG_NETFILTER_XT_MATCH_NFACCT=m +CONFIG_NETFILTER_XT_MATCH_OSF=m CONFIG_NETFILTER_XT_MATCH_OWNER=m CONFIG_NETFILTER_XT_MATCH_POLICY=m CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m @@ -96,22 +131,31 @@ CONFIG_NETFILTER_XT_MATCH_STRING=m CONFIG_NETFILTER_XT_MATCH_TCPMSS=m CONFIG_NETFILTER_XT_MATCH_TIME=m CONFIG_NETFILTER_XT_MATCH_U32=m +CONFIG_IP_SET=m +CONFIG_IP_SET_BITMAP_IP=m +CONFIG_IP_SET_BITMAP_IPMAC=m +CONFIG_IP_SET_BITMAP_PORT=m +CONFIG_IP_SET_HASH_IP=m +CONFIG_IP_SET_HASH_IPPORT=m +CONFIG_IP_SET_HASH_IPPORTIP=m +CONFIG_IP_SET_HASH_IPPORTNET=m +CONFIG_IP_SET_HASH_NET=m +CONFIG_IP_SET_HASH_NETPORT=m +CONFIG_IP_SET_HASH_NETIFACE=m +CONFIG_IP_SET_LIST_SET=m CONFIG_NF_CONNTRACK_IPV4=m -CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_ADDRTYPE=m CONFIG_IP_NF_MATCH_AH=m CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_RPFILTER=m CONFIG_IP_NF_MATCH_TTL=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_LOG=m CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_NF_NAT=m +CONFIG_NF_NAT_IPV4=m CONFIG_IP_NF_TARGET_MASQUERADE=m CONFIG_IP_NF_TARGET_NETMAP=m CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_NF_NAT_SNMP_BASIC=m CONFIG_IP_NF_MANGLE=m CONFIG_IP_NF_TARGET_CLUSTERIP=m CONFIG_IP_NF_TARGET_ECN=m @@ -121,7 +165,6 @@ CONFIG_IP_NF_ARPTABLES=m CONFIG_IP_NF_ARPFILTER=m CONFIG_IP_NF_ARP_MANGLE=m CONFIG_NF_CONNTRACK_IPV6=m -CONFIG_IP6_NF_QUEUE=m CONFIG_IP6_NF_IPTABLES=m CONFIG_IP6_NF_MATCH_AH=m CONFIG_IP6_NF_MATCH_EUI64=m @@ -130,21 +173,34 @@ CONFIG_IP6_NF_MATCH_OPTS=m CONFIG_IP6_NF_MATCH_HL=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m CONFIG_IP6_NF_MATCH_MH=m +CONFIG_IP6_NF_MATCH_RPFILTER=m CONFIG_IP6_NF_MATCH_RT=m CONFIG_IP6_NF_TARGET_HL=m -CONFIG_IP6_NF_TARGET_LOG=m CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_REJECT=m CONFIG_IP6_NF_MANGLE=m CONFIG_IP6_NF_RAW=m +CONFIG_NF_NAT_IPV6=m +CONFIG_IP6_NF_TARGET_MASQUERADE=m +CONFIG_IP6_NF_TARGET_NPT=m CONFIG_IP_DCCP=m # CONFIG_IP_DCCP_CCID3 is not set +CONFIG_SCTP_COOKIE_HMAC_SHA1=y +CONFIG_RDS=m +CONFIG_RDS_TCP=m +CONFIG_L2TP=m CONFIG_ATALK=m +CONFIG_BATMAN_ADV=m +CONFIG_BATMAN_ADV_DAT=y +# CONFIG_WIRELESS is not set CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y # CONFIG_FIRMWARE_IN_KERNEL is not set +# CONFIG_FW_LOADER_USER_HELPER is not set CONFIG_CONNECTOR=m CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_CRYPTOLOOP=m +CONFIG_BLK_DEV_DRBD=m CONFIG_BLK_DEV_NBD=m CONFIG_BLK_DEV_RAM=y CONFIG_CDROM_PKTCDVD=m @@ -159,103 +215,132 @@ CONFIG_BLK_DEV_SR=y CONFIG_BLK_DEV_SR_VENDOR=y CONFIG_CHR_DEV_SG=m CONFIG_SCSI_CONSTANTS=y -CONFIG_SCSI_SAS_LIBSAS=m -# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set -CONFIG_SCSI_SRP_ATTRS=m -CONFIG_SCSI_SRP_TGT_ATTRS=y +CONFIG_SCSI_SAS_ATTRS=m CONFIG_ISCSI_TCP=m +CONFIG_ISCSI_BOOT_SYSFS=m CONFIG_MVME147_SCSI=y CONFIG_MD=y -CONFIG_BLK_DEV_MD=m CONFIG_MD_LINEAR=m CONFIG_MD_RAID0=m -CONFIG_MD_RAID1=m -CONFIG_MD_RAID456=m CONFIG_BLK_DEV_DM=m CONFIG_DM_CRYPT=m CONFIG_DM_SNAPSHOT=m +CONFIG_DM_THIN_PROVISIONING=m +CONFIG_DM_CACHE=m CONFIG_DM_MIRROR=m +CONFIG_DM_RAID=m CONFIG_DM_ZERO=m CONFIG_DM_MULTIPATH=m CONFIG_DM_UEVENT=y +CONFIG_TARGET_CORE=m +CONFIG_TCM_IBLOCK=m +CONFIG_TCM_FILEIO=m +CONFIG_TCM_PSCSI=m CONFIG_NETDEVICES=y CONFIG_DUMMY=m -CONFIG_MACVLAN=m CONFIG_EQUALIZER=m +CONFIG_NET_TEAM=m +CONFIG_NET_TEAM_MODE_BROADCAST=m +CONFIG_NET_TEAM_MODE_ROUNDROBIN=m +CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m +CONFIG_NET_TEAM_MODE_LOADBALANCE=m +CONFIG_VXLAN=m +CONFIG_NETCONSOLE=m +CONFIG_NETCONSOLE_DYNAMIC=y CONFIG_VETH=m -CONFIG_NET_ETHERNET=y CONFIG_MVME147_NET=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set +# CONFIG_NET_CADENCE is not set +# CONFIG_NET_VENDOR_BROADCOM is not set +# CONFIG_NET_VENDOR_INTEL is not set +# CONFIG_NET_VENDOR_MARVELL is not set +# CONFIG_NET_VENDOR_MICREL is not set +# CONFIG_NET_VENDOR_NATSEMI is not set +# CONFIG_NET_VENDOR_SEEQ is not set +# CONFIG_NET_VENDOR_STMICRO is not set +# CONFIG_NET_VENDOR_WIZNET is not set CONFIG_PPP=m -CONFIG_PPP_FILTER=y -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m -CONFIG_PPP_DEFLATE=m CONFIG_PPP_BSDCOMP=m +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_FILTER=y CONFIG_PPP_MPPE=m CONFIG_PPPOE=m +CONFIG_PPTP=m +CONFIG_PPPOL2TP=m +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m CONFIG_SLIP=m CONFIG_SLIP_COMPRESSED=y CONFIG_SLIP_SMART=y CONFIG_SLIP_MODE_SLIP6=y -CONFIG_NETCONSOLE=m -CONFIG_NETCONSOLE_DYNAMIC=y -CONFIG_INPUT_FF_MEMLESS=m +# CONFIG_WLAN is not set +CONFIG_INPUT_EVDEV=m # CONFIG_KEYBOARD_ATKBD is not set -CONFIG_MOUSE_PS2=m -CONFIG_MOUSE_SERIAL=m -CONFIG_SERIO=m -# CONFIG_SERIO_SERPORT is not set +# CONFIG_MOUSE_PS2 is not set +# CONFIG_SERIO is not set CONFIG_VT_HW_CONSOLE_BINDING=y +# CONFIG_LEGACY_PTYS is not set # CONFIG_DEVKMEM is not set # CONFIG_HW_RANDOM is not set -CONFIG_GEN_RTC=m -CONFIG_GEN_RTC_X=y +CONFIG_NTP_PPS=y +CONFIG_PPS_CLIENT_LDISC=m +CONFIG_PTP_1588_CLOCK=m # CONFIG_HWMON is not set CONFIG_HID=m CONFIG_HIDRAW=y +CONFIG_UHID=m +# CONFIG_HID_GENERIC is not set # CONFIG_USB_SUPPORT is not set +CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_GENERIC=m +# CONFIG_IOMMU_SUPPORT is not set +CONFIG_PROC_HARDWARE=y CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set # CONFIG_EXT3_FS_XATTR is not set +CONFIG_EXT4_FS=y CONFIG_REISERFS_FS=m CONFIG_JFS_FS=m CONFIG_XFS_FS=m CONFIG_OCFS2_FS=m -# CONFIG_OCFS2_FS_STATS is not set # CONFIG_OCFS2_DEBUG_MASKLOG is not set +CONFIG_FANOTIFY=y CONFIG_QUOTA_NETLINK_INTERFACE=y # CONFIG_PRINT_QUOTA_WARNING is not set -CONFIG_AUTOFS_FS=m CONFIG_AUTOFS4_FS=m CONFIG_FUSE_FS=m +CONFIG_CUSE=m CONFIG_ISO9660_FS=y CONFIG_JOLIET=y CONFIG_ZISOFS=y CONFIG_UDF_FS=m -CONFIG_MSDOS_FS=y +CONFIG_MSDOS_FS=m CONFIG_VFAT_FS=m CONFIG_PROC_KCORE=y CONFIG_TMPFS=y CONFIG_AFFS_FS=m +CONFIG_ECRYPT_FS=m +CONFIG_ECRYPT_FS_MESSAGING=y CONFIG_HFS_FS=m CONFIG_HFSPLUS_FS=m CONFIG_CRAMFS=m CONFIG_SQUASHFS=m -CONFIG_MINIX_FS=y +CONFIG_SQUASHFS_LZO=y +CONFIG_MINIX_FS=m +CONFIG_OMFS_FS=m CONFIG_HPFS_FS=m +CONFIG_QNX4FS_FS=m +CONFIG_QNX6FS_FS=m CONFIG_SYSV_FS=m CONFIG_UFS_FS=m CONFIG_NFS_FS=y -CONFIG_NFS_V3=y CONFIG_NFS_V4=y +CONFIG_NFS_SWAP=y CONFIG_ROOT_NFS=y CONFIG_NFSD=m CONFIG_NFSD_V3=y -CONFIG_SMB_FS=m -CONFIG_SMB_NLS_DEFAULT=y +CONFIG_CIFS=m +# CONFIG_CIFS_DEBUG is not set CONFIG_CODA_FS=m CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_CODEPAGE_737=m @@ -294,10 +379,23 @@ CONFIG_NLS_ISO8859_14=m CONFIG_NLS_ISO8859_15=m CONFIG_NLS_KOI8_R=m CONFIG_NLS_KOI8_U=m +CONFIG_NLS_MAC_ROMAN=m +CONFIG_NLS_MAC_CELTIC=m +CONFIG_NLS_MAC_CENTEURO=m +CONFIG_NLS_MAC_CROATIAN=m +CONFIG_NLS_MAC_CYRILLIC=m +CONFIG_NLS_MAC_GAELIC=m +CONFIG_NLS_MAC_GREEK=m +CONFIG_NLS_MAC_ICELAND=m +CONFIG_NLS_MAC_INUIT=m +CONFIG_NLS_MAC_ROMANIAN=m +CONFIG_NLS_MAC_TURKISH=m CONFIG_DLM=m CONFIG_MAGIC_SYSRQ=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_ASYNC_RAID6_TEST=m +CONFIG_ENCRYPTED_KEYS=m +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_USER=m CONFIG_CRYPTO_NULL=m CONFIG_CRYPTO_CRYPTD=m CONFIG_CRYPTO_TEST=m @@ -307,19 +405,16 @@ CONFIG_CRYPTO_CTS=m CONFIG_CRYPTO_LRW=m CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_XTS=m -CONFIG_CRYPTO_HMAC=y CONFIG_CRYPTO_XCBC=m -CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_VMAC=m CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_RMD128=m CONFIG_CRYPTO_RMD160=m CONFIG_CRYPTO_RMD256=m CONFIG_CRYPTO_RMD320=m -CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m CONFIG_CRYPTO_TGR192=m CONFIG_CRYPTO_WP512=m -CONFIG_CRYPTO_AES=m CONFIG_CRYPTO_ANUBIS=m CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_CAMELLIA=m @@ -335,6 +430,14 @@ CONFIG_CRYPTO_TWOFISH=m CONFIG_CRYPTO_ZLIB=m CONFIG_CRYPTO_LZO=m # CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_USER_API_HASH=m +CONFIG_CRYPTO_USER_API_SKCIPHER=m # CONFIG_CRYPTO_HW is not set -CONFIG_CRC16=m CONFIG_CRC_T10DIF=y +CONFIG_XZ_DEC_X86=y +CONFIG_XZ_DEC_POWERPC=y +CONFIG_XZ_DEC_IA64=y +CONFIG_XZ_DEC_ARM=y +CONFIG_XZ_DEC_ARMTHUMB=y +CONFIG_XZ_DEC_SPARC=y +CONFIG_XZ_DEC_TEST=m diff --git a/arch/m68k/configs/mvme16x_defconfig b/arch/m68k/configs/mvme16x_defconfig index 7c9402b2097f..e5e8262bbacd 100644 --- a/arch/m68k/configs/mvme16x_defconfig +++ b/arch/m68k/configs/mvme16x_defconfig @@ -1,53 +1,74 @@ -CONFIG_EXPERIMENTAL=y CONFIG_LOCALVERSION="-mvme16x" CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y +CONFIG_FHANDLE=y CONFIG_BSD_PROCESS_ACCT=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_RELAY=y +CONFIG_BSD_PROCESS_ACCT_V3=y +CONFIG_LOG_BUF_SHIFT=16 +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +# CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SLAB=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y -CONFIG_VME=y -CONFIG_MVME16x=y +CONFIG_PARTITION_ADVANCED=y +CONFIG_AMIGA_PARTITION=y +CONFIG_ATARI_PARTITION=y +CONFIG_MAC_PARTITION=y +CONFIG_BSD_DISKLABEL=y +CONFIG_MINIX_SUBPARTITION=y +CONFIG_SOLARIS_X86_PARTITION=y +CONFIG_UNIXWARE_DISKLABEL=y +CONFIG_SUN_PARTITION=y +# CONFIG_EFI_PARTITION is not set +CONFIG_IOSCHED_DEADLINE=m CONFIG_M68040=y CONFIG_M68060=y +CONFIG_VME=y +CONFIG_MVME16x=y +# CONFIG_COMPACTION is not set +CONFIG_CLEANCACHE=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set CONFIG_BINFMT_AOUT=m CONFIG_BINFMT_MISC=m -CONFIG_PROC_HARDWARE=y CONFIG_NET=y CONFIG_PACKET=y +CONFIG_PACKET_DIAG=m CONFIG_UNIX=y +CONFIG_UNIX_DIAG=m +CONFIG_XFRM_MIGRATE=y CONFIG_NET_KEY=y -CONFIG_NET_KEY_MIGRATE=y CONFIG_INET=y CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y CONFIG_IP_PNP_RARP=y CONFIG_NET_IPIP=m +CONFIG_NET_IPGRE_DEMUX=m CONFIG_NET_IPGRE=m CONFIG_SYN_COOKIES=y +CONFIG_NET_IPVTI=m CONFIG_INET_AH=m CONFIG_INET_ESP=m CONFIG_INET_IPCOMP=m CONFIG_INET_XFRM_MODE_TRANSPORT=m CONFIG_INET_XFRM_MODE_TUNNEL=m CONFIG_INET_XFRM_MODE_BEET=m +# CONFIG_INET_LRO is not set CONFIG_INET_DIAG=m +CONFIG_INET_UDP_DIAG=m CONFIG_IPV6_PRIVACY=y CONFIG_IPV6_ROUTER_PREF=y -CONFIG_IPV6_ROUTE_INFO=y CONFIG_INET6_AH=m CONFIG_INET6_ESP=m CONFIG_INET6_IPCOMP=m -CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m -CONFIG_IPV6_TUNNEL=m +CONFIG_IPV6_GRE=m CONFIG_NETFILTER=y -CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NF_CONNTRACK=m +CONFIG_NF_CONNTRACK_ZONES=y +# CONFIG_NF_CONNTRACK_PROCFS is not set # CONFIG_NF_CT_PROTO_DCCP is not set CONFIG_NF_CT_PROTO_UDPLITE=m CONFIG_NF_CONNTRACK_AMANDA=m @@ -55,25 +76,37 @@ CONFIG_NF_CONNTRACK_FTP=m CONFIG_NF_CONNTRACK_H323=m CONFIG_NF_CONNTRACK_IRC=m CONFIG_NF_CONNTRACK_NETBIOS_NS=m +CONFIG_NF_CONNTRACK_SNMP=m CONFIG_NF_CONNTRACK_PPTP=m CONFIG_NF_CONNTRACK_SANE=m CONFIG_NF_CONNTRACK_SIP=m CONFIG_NF_CONNTRACK_TFTP=m +CONFIG_NETFILTER_XT_SET=m +CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m CONFIG_NETFILTER_XT_TARGET_CONNMARK=m CONFIG_NETFILTER_XT_TARGET_DSCP=m +CONFIG_NETFILTER_XT_TARGET_HMARK=m +CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m +CONFIG_NETFILTER_XT_TARGET_LOG=m CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFLOG=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m +CONFIG_NETFILTER_XT_TARGET_NOTRACK=m +CONFIG_NETFILTER_XT_TARGET_TEE=m CONFIG_NETFILTER_XT_TARGET_TRACE=m CONFIG_NETFILTER_XT_TARGET_TCPMSS=m CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m +CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m +CONFIG_NETFILTER_XT_MATCH_BPF=m CONFIG_NETFILTER_XT_MATCH_CLUSTER=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m +CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m CONFIG_NETFILTER_XT_MATCH_CONNMARK=m CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m +CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m CONFIG_NETFILTER_XT_MATCH_DSCP=m CONFIG_NETFILTER_XT_MATCH_ESP=m CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m @@ -84,6 +117,8 @@ CONFIG_NETFILTER_XT_MATCH_LIMIT=m CONFIG_NETFILTER_XT_MATCH_MAC=m CONFIG_NETFILTER_XT_MATCH_MARK=m CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m +CONFIG_NETFILTER_XT_MATCH_NFACCT=m +CONFIG_NETFILTER_XT_MATCH_OSF=m CONFIG_NETFILTER_XT_MATCH_OWNER=m CONFIG_NETFILTER_XT_MATCH_POLICY=m CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m @@ -97,22 +132,31 @@ CONFIG_NETFILTER_XT_MATCH_STRING=m CONFIG_NETFILTER_XT_MATCH_TCPMSS=m CONFIG_NETFILTER_XT_MATCH_TIME=m CONFIG_NETFILTER_XT_MATCH_U32=m +CONFIG_IP_SET=m +CONFIG_IP_SET_BITMAP_IP=m +CONFIG_IP_SET_BITMAP_IPMAC=m +CONFIG_IP_SET_BITMAP_PORT=m +CONFIG_IP_SET_HASH_IP=m +CONFIG_IP_SET_HASH_IPPORT=m +CONFIG_IP_SET_HASH_IPPORTIP=m +CONFIG_IP_SET_HASH_IPPORTNET=m +CONFIG_IP_SET_HASH_NET=m +CONFIG_IP_SET_HASH_NETPORT=m +CONFIG_IP_SET_HASH_NETIFACE=m +CONFIG_IP_SET_LIST_SET=m CONFIG_NF_CONNTRACK_IPV4=m -CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_ADDRTYPE=m CONFIG_IP_NF_MATCH_AH=m CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_RPFILTER=m CONFIG_IP_NF_MATCH_TTL=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_LOG=m CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_NF_NAT=m +CONFIG_NF_NAT_IPV4=m CONFIG_IP_NF_TARGET_MASQUERADE=m CONFIG_IP_NF_TARGET_NETMAP=m CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_NF_NAT_SNMP_BASIC=m CONFIG_IP_NF_MANGLE=m CONFIG_IP_NF_TARGET_CLUSTERIP=m CONFIG_IP_NF_TARGET_ECN=m @@ -122,7 +166,6 @@ CONFIG_IP_NF_ARPTABLES=m CONFIG_IP_NF_ARPFILTER=m CONFIG_IP_NF_ARP_MANGLE=m CONFIG_NF_CONNTRACK_IPV6=m -CONFIG_IP6_NF_QUEUE=m CONFIG_IP6_NF_IPTABLES=m CONFIG_IP6_NF_MATCH_AH=m CONFIG_IP6_NF_MATCH_EUI64=m @@ -131,21 +174,34 @@ CONFIG_IP6_NF_MATCH_OPTS=m CONFIG_IP6_NF_MATCH_HL=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m CONFIG_IP6_NF_MATCH_MH=m +CONFIG_IP6_NF_MATCH_RPFILTER=m CONFIG_IP6_NF_MATCH_RT=m CONFIG_IP6_NF_TARGET_HL=m -CONFIG_IP6_NF_TARGET_LOG=m CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_REJECT=m CONFIG_IP6_NF_MANGLE=m CONFIG_IP6_NF_RAW=m +CONFIG_NF_NAT_IPV6=m +CONFIG_IP6_NF_TARGET_MASQUERADE=m +CONFIG_IP6_NF_TARGET_NPT=m CONFIG_IP_DCCP=m # CONFIG_IP_DCCP_CCID3 is not set +CONFIG_SCTP_COOKIE_HMAC_SHA1=y +CONFIG_RDS=m +CONFIG_RDS_TCP=m +CONFIG_L2TP=m CONFIG_ATALK=m +CONFIG_BATMAN_ADV=m +CONFIG_BATMAN_ADV_DAT=y +# CONFIG_WIRELESS is not set CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y # CONFIG_FIRMWARE_IN_KERNEL is not set +# CONFIG_FW_LOADER_USER_HELPER is not set CONFIG_CONNECTOR=m CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_CRYPTOLOOP=m +CONFIG_BLK_DEV_DRBD=m CONFIG_BLK_DEV_NBD=m CONFIG_BLK_DEV_RAM=y CONFIG_CDROM_PKTCDVD=m @@ -160,103 +216,131 @@ CONFIG_BLK_DEV_SR=y CONFIG_BLK_DEV_SR_VENDOR=y CONFIG_CHR_DEV_SG=m CONFIG_SCSI_CONSTANTS=y -CONFIG_SCSI_SAS_LIBSAS=m -# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set -CONFIG_SCSI_SRP_ATTRS=m -CONFIG_SCSI_SRP_TGT_ATTRS=y +CONFIG_SCSI_SAS_ATTRS=m CONFIG_ISCSI_TCP=m +CONFIG_ISCSI_BOOT_SYSFS=m CONFIG_MVME16x_SCSI=y CONFIG_MD=y -CONFIG_BLK_DEV_MD=m CONFIG_MD_LINEAR=m CONFIG_MD_RAID0=m -CONFIG_MD_RAID1=m -CONFIG_MD_RAID456=m CONFIG_BLK_DEV_DM=m CONFIG_DM_CRYPT=m CONFIG_DM_SNAPSHOT=m +CONFIG_DM_THIN_PROVISIONING=m +CONFIG_DM_CACHE=m CONFIG_DM_MIRROR=m +CONFIG_DM_RAID=m CONFIG_DM_ZERO=m CONFIG_DM_MULTIPATH=m CONFIG_DM_UEVENT=y +CONFIG_TARGET_CORE=m +CONFIG_TCM_IBLOCK=m +CONFIG_TCM_FILEIO=m +CONFIG_TCM_PSCSI=m CONFIG_NETDEVICES=y CONFIG_DUMMY=m -CONFIG_MACVLAN=m CONFIG_EQUALIZER=m +CONFIG_NET_TEAM=m +CONFIG_NET_TEAM_MODE_BROADCAST=m +CONFIG_NET_TEAM_MODE_ROUNDROBIN=m +CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m +CONFIG_NET_TEAM_MODE_LOADBALANCE=m +CONFIG_VXLAN=m +CONFIG_NETCONSOLE=m +CONFIG_NETCONSOLE_DYNAMIC=y CONFIG_VETH=m -CONFIG_NET_ETHERNET=y +# CONFIG_NET_CADENCE is not set +# CONFIG_NET_VENDOR_BROADCOM is not set CONFIG_MVME16x_NET=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set +# CONFIG_NET_VENDOR_MARVELL is not set +# CONFIG_NET_VENDOR_MICREL is not set +# CONFIG_NET_VENDOR_NATSEMI is not set +# CONFIG_NET_VENDOR_SEEQ is not set +# CONFIG_NET_VENDOR_STMICRO is not set +# CONFIG_NET_VENDOR_WIZNET is not set CONFIG_PPP=m -CONFIG_PPP_FILTER=y -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m -CONFIG_PPP_DEFLATE=m CONFIG_PPP_BSDCOMP=m +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_FILTER=y CONFIG_PPP_MPPE=m CONFIG_PPPOE=m +CONFIG_PPTP=m +CONFIG_PPPOL2TP=m +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m CONFIG_SLIP=m CONFIG_SLIP_COMPRESSED=y CONFIG_SLIP_SMART=y CONFIG_SLIP_MODE_SLIP6=y -CONFIG_NETCONSOLE=m -CONFIG_NETCONSOLE_DYNAMIC=y -CONFIG_INPUT_FF_MEMLESS=m +# CONFIG_WLAN is not set +CONFIG_INPUT_EVDEV=m # CONFIG_KEYBOARD_ATKBD is not set -CONFIG_MOUSE_PS2=m -CONFIG_MOUSE_SERIAL=m -CONFIG_SERIO=m -# CONFIG_SERIO_SERPORT is not set +# CONFIG_MOUSE_PS2 is not set +# CONFIG_SERIO is not set CONFIG_VT_HW_CONSOLE_BINDING=y +# CONFIG_LEGACY_PTYS is not set # CONFIG_DEVKMEM is not set # CONFIG_HW_RANDOM is not set -CONFIG_GEN_RTC=m -CONFIG_GEN_RTC_X=y +CONFIG_NTP_PPS=y +CONFIG_PPS_CLIENT_LDISC=m +CONFIG_PTP_1588_CLOCK=m # CONFIG_HWMON is not set CONFIG_HID=m CONFIG_HIDRAW=y +CONFIG_UHID=m +# CONFIG_HID_GENERIC is not set # CONFIG_USB_SUPPORT is not set +CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_GENERIC=m +# CONFIG_IOMMU_SUPPORT is not set +CONFIG_PROC_HARDWARE=y CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set # CONFIG_EXT3_FS_XATTR is not set +CONFIG_EXT4_FS=y CONFIG_REISERFS_FS=m CONFIG_JFS_FS=m CONFIG_XFS_FS=m CONFIG_OCFS2_FS=m -# CONFIG_OCFS2_FS_STATS is not set # CONFIG_OCFS2_DEBUG_MASKLOG is not set +CONFIG_FANOTIFY=y CONFIG_QUOTA_NETLINK_INTERFACE=y # CONFIG_PRINT_QUOTA_WARNING is not set -CONFIG_AUTOFS_FS=m CONFIG_AUTOFS4_FS=m CONFIG_FUSE_FS=m +CONFIG_CUSE=m CONFIG_ISO9660_FS=y CONFIG_JOLIET=y CONFIG_ZISOFS=y CONFIG_UDF_FS=m -CONFIG_MSDOS_FS=y +CONFIG_MSDOS_FS=m CONFIG_VFAT_FS=m CONFIG_PROC_KCORE=y CONFIG_TMPFS=y CONFIG_AFFS_FS=m +CONFIG_ECRYPT_FS=m +CONFIG_ECRYPT_FS_MESSAGING=y CONFIG_HFS_FS=m CONFIG_HFSPLUS_FS=m CONFIG_CRAMFS=m CONFIG_SQUASHFS=m -CONFIG_MINIX_FS=y +CONFIG_SQUASHFS_LZO=y +CONFIG_MINIX_FS=m +CONFIG_OMFS_FS=m CONFIG_HPFS_FS=m +CONFIG_QNX4FS_FS=m +CONFIG_QNX6FS_FS=m CONFIG_SYSV_FS=m CONFIG_UFS_FS=m CONFIG_NFS_FS=y -CONFIG_NFS_V3=y CONFIG_NFS_V4=y +CONFIG_NFS_SWAP=y CONFIG_ROOT_NFS=y CONFIG_NFSD=m CONFIG_NFSD_V3=y -CONFIG_SMB_FS=m -CONFIG_SMB_NLS_DEFAULT=y +CONFIG_CIFS=m +# CONFIG_CIFS_DEBUG is not set CONFIG_CODA_FS=m CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_CODEPAGE_737=m @@ -295,10 +379,23 @@ CONFIG_NLS_ISO8859_14=m CONFIG_NLS_ISO8859_15=m CONFIG_NLS_KOI8_R=m CONFIG_NLS_KOI8_U=m +CONFIG_NLS_MAC_ROMAN=m +CONFIG_NLS_MAC_CELTIC=m +CONFIG_NLS_MAC_CENTEURO=m +CONFIG_NLS_MAC_CROATIAN=m +CONFIG_NLS_MAC_CYRILLIC=m +CONFIG_NLS_MAC_GAELIC=m +CONFIG_NLS_MAC_GREEK=m +CONFIG_NLS_MAC_ICELAND=m +CONFIG_NLS_MAC_INUIT=m +CONFIG_NLS_MAC_ROMANIAN=m +CONFIG_NLS_MAC_TURKISH=m CONFIG_DLM=m CONFIG_MAGIC_SYSRQ=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_ASYNC_RAID6_TEST=m +CONFIG_ENCRYPTED_KEYS=m +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_USER=m CONFIG_CRYPTO_NULL=m CONFIG_CRYPTO_CRYPTD=m CONFIG_CRYPTO_TEST=m @@ -308,19 +405,16 @@ CONFIG_CRYPTO_CTS=m CONFIG_CRYPTO_LRW=m CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_XTS=m -CONFIG_CRYPTO_HMAC=y CONFIG_CRYPTO_XCBC=m -CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_VMAC=m CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_RMD128=m CONFIG_CRYPTO_RMD160=m CONFIG_CRYPTO_RMD256=m CONFIG_CRYPTO_RMD320=m -CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m CONFIG_CRYPTO_TGR192=m CONFIG_CRYPTO_WP512=m -CONFIG_CRYPTO_AES=m CONFIG_CRYPTO_ANUBIS=m CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_CAMELLIA=m @@ -336,6 +430,14 @@ CONFIG_CRYPTO_TWOFISH=m CONFIG_CRYPTO_ZLIB=m CONFIG_CRYPTO_LZO=m # CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_USER_API_HASH=m +CONFIG_CRYPTO_USER_API_SKCIPHER=m # CONFIG_CRYPTO_HW is not set -CONFIG_CRC16=m CONFIG_CRC_T10DIF=y +CONFIG_XZ_DEC_X86=y +CONFIG_XZ_DEC_POWERPC=y +CONFIG_XZ_DEC_IA64=y +CONFIG_XZ_DEC_ARM=y +CONFIG_XZ_DEC_ARMTHUMB=y +CONFIG_XZ_DEC_SPARC=y +CONFIG_XZ_DEC_TEST=m diff --git a/arch/m68k/configs/q40_defconfig b/arch/m68k/configs/q40_defconfig index 19d23db690a4..8982370e8b42 100644 --- a/arch/m68k/configs/q40_defconfig +++ b/arch/m68k/configs/q40_defconfig @@ -1,49 +1,74 @@ -CONFIG_EXPERIMENTAL=y CONFIG_LOCALVERSION="-q40" CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y +CONFIG_FHANDLE=y CONFIG_BSD_PROCESS_ACCT=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_RELAY=y +CONFIG_BSD_PROCESS_ACCT_V3=y +CONFIG_LOG_BUF_SHIFT=16 +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +# CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SLAB=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y -CONFIG_Q40=y +CONFIG_PARTITION_ADVANCED=y +CONFIG_AMIGA_PARTITION=y +CONFIG_ATARI_PARTITION=y +CONFIG_MAC_PARTITION=y +CONFIG_BSD_DISKLABEL=y +CONFIG_MINIX_SUBPARTITION=y +CONFIG_SOLARIS_X86_PARTITION=y +CONFIG_UNIXWARE_DISKLABEL=y +CONFIG_SUN_PARTITION=y +# CONFIG_EFI_PARTITION is not set +CONFIG_SYSV68_PARTITION=y +CONFIG_IOSCHED_DEADLINE=m CONFIG_M68040=y CONFIG_M68060=y +CONFIG_Q40=y +# CONFIG_COMPACTION is not set +CONFIG_CLEANCACHE=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set CONFIG_BINFMT_AOUT=m CONFIG_BINFMT_MISC=m -CONFIG_HEARTBEAT=y -CONFIG_PROC_HARDWARE=y CONFIG_NET=y CONFIG_PACKET=y +CONFIG_PACKET_DIAG=m CONFIG_UNIX=y +CONFIG_UNIX_DIAG=m +CONFIG_XFRM_MIGRATE=y CONFIG_NET_KEY=y -CONFIG_NET_KEY_MIGRATE=y CONFIG_INET=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_IP_PNP_RARP=y CONFIG_NET_IPIP=m +CONFIG_NET_IPGRE_DEMUX=m CONFIG_NET_IPGRE=m CONFIG_SYN_COOKIES=y +CONFIG_NET_IPVTI=m CONFIG_INET_AH=m CONFIG_INET_ESP=m CONFIG_INET_IPCOMP=m CONFIG_INET_XFRM_MODE_TRANSPORT=m CONFIG_INET_XFRM_MODE_TUNNEL=m CONFIG_INET_XFRM_MODE_BEET=m +# CONFIG_INET_LRO is not set CONFIG_INET_DIAG=m +CONFIG_INET_UDP_DIAG=m CONFIG_IPV6_PRIVACY=y CONFIG_IPV6_ROUTER_PREF=y -CONFIG_IPV6_ROUTE_INFO=y CONFIG_INET6_AH=m CONFIG_INET6_ESP=m CONFIG_INET6_IPCOMP=m -CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m -CONFIG_IPV6_TUNNEL=m +CONFIG_IPV6_GRE=m CONFIG_NETFILTER=y -CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NF_CONNTRACK=m +CONFIG_NF_CONNTRACK_ZONES=y +# CONFIG_NF_CONNTRACK_PROCFS is not set # CONFIG_NF_CT_PROTO_DCCP is not set CONFIG_NF_CT_PROTO_UDPLITE=m CONFIG_NF_CONNTRACK_AMANDA=m @@ -51,25 +76,37 @@ CONFIG_NF_CONNTRACK_FTP=m CONFIG_NF_CONNTRACK_H323=m CONFIG_NF_CONNTRACK_IRC=m CONFIG_NF_CONNTRACK_NETBIOS_NS=m +CONFIG_NF_CONNTRACK_SNMP=m CONFIG_NF_CONNTRACK_PPTP=m CONFIG_NF_CONNTRACK_SANE=m CONFIG_NF_CONNTRACK_SIP=m CONFIG_NF_CONNTRACK_TFTP=m +CONFIG_NETFILTER_XT_SET=m +CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m CONFIG_NETFILTER_XT_TARGET_CONNMARK=m CONFIG_NETFILTER_XT_TARGET_DSCP=m +CONFIG_NETFILTER_XT_TARGET_HMARK=m +CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m +CONFIG_NETFILTER_XT_TARGET_LOG=m CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFLOG=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m +CONFIG_NETFILTER_XT_TARGET_NOTRACK=m +CONFIG_NETFILTER_XT_TARGET_TEE=m CONFIG_NETFILTER_XT_TARGET_TRACE=m CONFIG_NETFILTER_XT_TARGET_TCPMSS=m CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m +CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m +CONFIG_NETFILTER_XT_MATCH_BPF=m CONFIG_NETFILTER_XT_MATCH_CLUSTER=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m +CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m CONFIG_NETFILTER_XT_MATCH_CONNMARK=m CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m +CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m CONFIG_NETFILTER_XT_MATCH_DSCP=m CONFIG_NETFILTER_XT_MATCH_ESP=m CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m @@ -80,6 +117,8 @@ CONFIG_NETFILTER_XT_MATCH_LIMIT=m CONFIG_NETFILTER_XT_MATCH_MAC=m CONFIG_NETFILTER_XT_MATCH_MARK=m CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m +CONFIG_NETFILTER_XT_MATCH_NFACCT=m +CONFIG_NETFILTER_XT_MATCH_OSF=m CONFIG_NETFILTER_XT_MATCH_OWNER=m CONFIG_NETFILTER_XT_MATCH_POLICY=m CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m @@ -93,22 +132,31 @@ CONFIG_NETFILTER_XT_MATCH_STRING=m CONFIG_NETFILTER_XT_MATCH_TCPMSS=m CONFIG_NETFILTER_XT_MATCH_TIME=m CONFIG_NETFILTER_XT_MATCH_U32=m +CONFIG_IP_SET=m +CONFIG_IP_SET_BITMAP_IP=m +CONFIG_IP_SET_BITMAP_IPMAC=m +CONFIG_IP_SET_BITMAP_PORT=m +CONFIG_IP_SET_HASH_IP=m +CONFIG_IP_SET_HASH_IPPORT=m +CONFIG_IP_SET_HASH_IPPORTIP=m +CONFIG_IP_SET_HASH_IPPORTNET=m +CONFIG_IP_SET_HASH_NET=m +CONFIG_IP_SET_HASH_NETPORT=m +CONFIG_IP_SET_HASH_NETIFACE=m +CONFIG_IP_SET_LIST_SET=m CONFIG_NF_CONNTRACK_IPV4=m -CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_ADDRTYPE=m CONFIG_IP_NF_MATCH_AH=m CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_RPFILTER=m CONFIG_IP_NF_MATCH_TTL=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_LOG=m CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_NF_NAT=m +CONFIG_NF_NAT_IPV4=m CONFIG_IP_NF_TARGET_MASQUERADE=m CONFIG_IP_NF_TARGET_NETMAP=m CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_NF_NAT_SNMP_BASIC=m CONFIG_IP_NF_MANGLE=m CONFIG_IP_NF_TARGET_CLUSTERIP=m CONFIG_IP_NF_TARGET_ECN=m @@ -118,7 +166,6 @@ CONFIG_IP_NF_ARPTABLES=m CONFIG_IP_NF_ARPFILTER=m CONFIG_IP_NF_ARP_MANGLE=m CONFIG_NF_CONNTRACK_IPV6=m -CONFIG_IP6_NF_QUEUE=m CONFIG_IP6_NF_IPTABLES=m CONFIG_IP6_NF_MATCH_AH=m CONFIG_IP6_NF_MATCH_EUI64=m @@ -127,26 +174,40 @@ CONFIG_IP6_NF_MATCH_OPTS=m CONFIG_IP6_NF_MATCH_HL=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m CONFIG_IP6_NF_MATCH_MH=m +CONFIG_IP6_NF_MATCH_RPFILTER=m CONFIG_IP6_NF_MATCH_RT=m CONFIG_IP6_NF_TARGET_HL=m -CONFIG_IP6_NF_TARGET_LOG=m CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_REJECT=m CONFIG_IP6_NF_MANGLE=m CONFIG_IP6_NF_RAW=m +CONFIG_NF_NAT_IPV6=m +CONFIG_IP6_NF_TARGET_MASQUERADE=m +CONFIG_IP6_NF_TARGET_NPT=m CONFIG_IP_DCCP=m # CONFIG_IP_DCCP_CCID3 is not set +CONFIG_SCTP_COOKIE_HMAC_SHA1=y +CONFIG_RDS=m +CONFIG_RDS_TCP=m +CONFIG_L2TP=m CONFIG_ATALK=m +CONFIG_BATMAN_ADV=m +CONFIG_BATMAN_ADV_DAT=y +# CONFIG_WIRELESS is not set CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y # CONFIG_FIRMWARE_IN_KERNEL is not set +# CONFIG_FW_LOADER_USER_HELPER is not set CONFIG_CONNECTOR=m CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_CRYPTOLOOP=m +CONFIG_BLK_DEV_DRBD=m CONFIG_BLK_DEV_NBD=m CONFIG_BLK_DEV_RAM=y CONFIG_CDROM_PKTCDVD=m CONFIG_ATA_OVER_ETH=m CONFIG_IDE=y +CONFIG_IDE_GD_ATAPI=y CONFIG_BLK_DEV_IDECD=y CONFIG_BLK_DEV_Q40IDE=y CONFIG_RAID_ATTRS=m @@ -159,61 +220,82 @@ CONFIG_BLK_DEV_SR=y CONFIG_BLK_DEV_SR_VENDOR=y CONFIG_CHR_DEV_SG=m CONFIG_SCSI_CONSTANTS=y -CONFIG_SCSI_SAS_LIBSAS=m -# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set -CONFIG_SCSI_SRP_ATTRS=m -CONFIG_SCSI_SRP_TGT_ATTRS=y +CONFIG_SCSI_SAS_ATTRS=m CONFIG_ISCSI_TCP=m +CONFIG_ISCSI_BOOT_SYSFS=m CONFIG_MD=y -CONFIG_BLK_DEV_MD=m CONFIG_MD_LINEAR=m CONFIG_MD_RAID0=m -CONFIG_MD_RAID1=m -CONFIG_MD_RAID456=m CONFIG_BLK_DEV_DM=m CONFIG_DM_CRYPT=m CONFIG_DM_SNAPSHOT=m +CONFIG_DM_THIN_PROVISIONING=m +CONFIG_DM_CACHE=m CONFIG_DM_MIRROR=m +CONFIG_DM_RAID=m CONFIG_DM_ZERO=m CONFIG_DM_MULTIPATH=m CONFIG_DM_UEVENT=y +CONFIG_TARGET_CORE=m +CONFIG_TCM_IBLOCK=m +CONFIG_TCM_FILEIO=m +CONFIG_TCM_PSCSI=m CONFIG_NETDEVICES=y CONFIG_DUMMY=m -CONFIG_MACVLAN=m CONFIG_EQUALIZER=m +CONFIG_NET_TEAM=m +CONFIG_NET_TEAM_MODE_BROADCAST=m +CONFIG_NET_TEAM_MODE_ROUNDROBIN=m +CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m +CONFIG_NET_TEAM_MODE_LOADBALANCE=m +CONFIG_VXLAN=m +CONFIG_NETCONSOLE=m +CONFIG_NETCONSOLE_DYNAMIC=y CONFIG_VETH=m -CONFIG_NET_ETHERNET=y +# CONFIG_NET_VENDOR_3COM is not set +# CONFIG_NET_VENDOR_AMD is not set +# CONFIG_NET_CADENCE is not set +# CONFIG_NET_VENDOR_BROADCOM is not set +# CONFIG_NET_VENDOR_CIRRUS is not set +# CONFIG_NET_VENDOR_FUJITSU is not set +# CONFIG_NET_VENDOR_HP is not set +# CONFIG_NET_VENDOR_INTEL is not set +# CONFIG_NET_VENDOR_MARVELL is not set +# CONFIG_NET_VENDOR_MICREL is not set CONFIG_NE2000=m -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set +# CONFIG_NET_VENDOR_SEEQ is not set +# CONFIG_NET_VENDOR_SMSC is not set +# CONFIG_NET_VENDOR_STMICRO is not set +# CONFIG_NET_VENDOR_WIZNET is not set CONFIG_PPP=m -CONFIG_PPP_FILTER=y -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m -CONFIG_PPP_DEFLATE=m CONFIG_PPP_BSDCOMP=m +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_FILTER=y CONFIG_PPP_MPPE=m CONFIG_PPPOE=m +CONFIG_PPTP=m +CONFIG_PPPOL2TP=m +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m CONFIG_SLIP=m CONFIG_SLIP_COMPRESSED=y CONFIG_SLIP_SMART=y CONFIG_SLIP_MODE_SLIP6=y -CONFIG_NETCONSOLE=m -CONFIG_NETCONSOLE_DYNAMIC=y -CONFIG_INPUT_FF_MEMLESS=m +# CONFIG_WLAN is not set +CONFIG_INPUT_EVDEV=m # CONFIG_KEYBOARD_ATKBD is not set -CONFIG_MOUSE_PS2=m +# CONFIG_MOUSE_PS2 is not set CONFIG_MOUSE_SERIAL=m CONFIG_INPUT_MISC=y CONFIG_INPUT_M68K_BEEP=m -CONFIG_SERIO=m -# CONFIG_SERIO_SERPORT is not set -CONFIG_SERIO_Q40KBD=m +CONFIG_SERIO_Q40KBD=y CONFIG_VT_HW_CONSOLE_BINDING=y +# CONFIG_LEGACY_PTYS is not set # CONFIG_DEVKMEM is not set # CONFIG_HW_RANDOM is not set -CONFIG_GEN_RTC=m -CONFIG_GEN_RTC_X=y +CONFIG_NTP_PPS=y +CONFIG_PPS_CLIENT_LDISC=m +CONFIG_PTP_1588_CLOCK=m # CONFIG_HWMON is not set CONFIG_FB=y CONFIG_FRAMEBUFFER_CONSOLE=y @@ -222,46 +304,61 @@ CONFIG_SOUND=m CONFIG_DMASOUND_Q40=m CONFIG_HID=m CONFIG_HIDRAW=y +CONFIG_UHID=m +# CONFIG_HID_GENERIC is not set # CONFIG_USB_SUPPORT is not set +CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_GENERIC=m +# CONFIG_IOMMU_SUPPORT is not set +CONFIG_HEARTBEAT=y +CONFIG_PROC_HARDWARE=y CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set # CONFIG_EXT3_FS_XATTR is not set +CONFIG_EXT4_FS=y CONFIG_REISERFS_FS=m CONFIG_JFS_FS=m CONFIG_XFS_FS=m CONFIG_OCFS2_FS=m -# CONFIG_OCFS2_FS_STATS is not set # CONFIG_OCFS2_DEBUG_MASKLOG is not set +CONFIG_FANOTIFY=y CONFIG_QUOTA_NETLINK_INTERFACE=y # CONFIG_PRINT_QUOTA_WARNING is not set -CONFIG_AUTOFS_FS=m CONFIG_AUTOFS4_FS=m CONFIG_FUSE_FS=m +CONFIG_CUSE=m CONFIG_ISO9660_FS=y CONFIG_JOLIET=y CONFIG_ZISOFS=y CONFIG_UDF_FS=m -CONFIG_MSDOS_FS=y +CONFIG_MSDOS_FS=m CONFIG_VFAT_FS=m CONFIG_PROC_KCORE=y CONFIG_TMPFS=y CONFIG_AFFS_FS=m +CONFIG_ECRYPT_FS=m +CONFIG_ECRYPT_FS_MESSAGING=y CONFIG_HFS_FS=m CONFIG_HFSPLUS_FS=m CONFIG_CRAMFS=m CONFIG_SQUASHFS=m -CONFIG_MINIX_FS=y +CONFIG_SQUASHFS_LZO=y +CONFIG_MINIX_FS=m +CONFIG_OMFS_FS=m CONFIG_HPFS_FS=m +CONFIG_QNX4FS_FS=m +CONFIG_QNX6FS_FS=m CONFIG_SYSV_FS=m CONFIG_UFS_FS=m CONFIG_NFS_FS=y -CONFIG_NFS_V3=y CONFIG_NFS_V4=y +CONFIG_NFS_SWAP=y +CONFIG_ROOT_NFS=y CONFIG_NFSD=m CONFIG_NFSD_V3=y -CONFIG_SMB_FS=m -CONFIG_SMB_NLS_DEFAULT=y +CONFIG_CIFS=m +# CONFIG_CIFS_DEBUG is not set CONFIG_CODA_FS=m CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_CODEPAGE_737=m @@ -300,10 +397,23 @@ CONFIG_NLS_ISO8859_14=m CONFIG_NLS_ISO8859_15=m CONFIG_NLS_KOI8_R=m CONFIG_NLS_KOI8_U=m +CONFIG_NLS_MAC_ROMAN=m +CONFIG_NLS_MAC_CELTIC=m +CONFIG_NLS_MAC_CENTEURO=m +CONFIG_NLS_MAC_CROATIAN=m +CONFIG_NLS_MAC_CYRILLIC=m +CONFIG_NLS_MAC_GAELIC=m +CONFIG_NLS_MAC_GREEK=m +CONFIG_NLS_MAC_ICELAND=m +CONFIG_NLS_MAC_INUIT=m +CONFIG_NLS_MAC_ROMANIAN=m +CONFIG_NLS_MAC_TURKISH=m CONFIG_DLM=m CONFIG_MAGIC_SYSRQ=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_ASYNC_RAID6_TEST=m +CONFIG_ENCRYPTED_KEYS=m +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_USER=m CONFIG_CRYPTO_NULL=m CONFIG_CRYPTO_CRYPTD=m CONFIG_CRYPTO_TEST=m @@ -313,19 +423,16 @@ CONFIG_CRYPTO_CTS=m CONFIG_CRYPTO_LRW=m CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_XTS=m -CONFIG_CRYPTO_HMAC=y CONFIG_CRYPTO_XCBC=m -CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_VMAC=m CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_RMD128=m CONFIG_CRYPTO_RMD160=m CONFIG_CRYPTO_RMD256=m CONFIG_CRYPTO_RMD320=m -CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m CONFIG_CRYPTO_TGR192=m CONFIG_CRYPTO_WP512=m -CONFIG_CRYPTO_AES=m CONFIG_CRYPTO_ANUBIS=m CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_CAMELLIA=m @@ -341,6 +448,14 @@ CONFIG_CRYPTO_TWOFISH=m CONFIG_CRYPTO_ZLIB=m CONFIG_CRYPTO_LZO=m # CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_USER_API_HASH=m +CONFIG_CRYPTO_USER_API_SKCIPHER=m # CONFIG_CRYPTO_HW is not set -CONFIG_CRC16=m CONFIG_CRC_T10DIF=y +CONFIG_XZ_DEC_X86=y +CONFIG_XZ_DEC_POWERPC=y +CONFIG_XZ_DEC_IA64=y +CONFIG_XZ_DEC_ARM=y +CONFIG_XZ_DEC_ARMTHUMB=y +CONFIG_XZ_DEC_SPARC=y +CONFIG_XZ_DEC_TEST=m diff --git a/arch/m68k/configs/sun3_defconfig b/arch/m68k/configs/sun3_defconfig index ca6c0b4cab77..54674d61e001 100644 --- a/arch/m68k/configs/sun3_defconfig +++ b/arch/m68k/configs/sun3_defconfig @@ -1,50 +1,71 @@ -CONFIG_EXPERIMENTAL=y CONFIG_LOCALVERSION="-sun3" CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y +CONFIG_FHANDLE=y CONFIG_BSD_PROCESS_ACCT=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_RELAY=y +CONFIG_BSD_PROCESS_ACCT_V3=y +CONFIG_LOG_BUF_SHIFT=16 +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +# CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SLAB=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y +CONFIG_PARTITION_ADVANCED=y +CONFIG_AMIGA_PARTITION=y +CONFIG_ATARI_PARTITION=y +CONFIG_MAC_PARTITION=y +CONFIG_BSD_DISKLABEL=y +CONFIG_MINIX_SUBPARTITION=y +CONFIG_SOLARIS_X86_PARTITION=y +CONFIG_UNIXWARE_DISKLABEL=y +# CONFIG_EFI_PARTITION is not set +CONFIG_SYSV68_PARTITION=y +CONFIG_IOSCHED_DEADLINE=m CONFIG_SUN3=y +# CONFIG_COMPACTION is not set +CONFIG_CLEANCACHE=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set CONFIG_BINFMT_AOUT=m CONFIG_BINFMT_MISC=m -CONFIG_PROC_HARDWARE=y CONFIG_NET=y CONFIG_PACKET=y +CONFIG_PACKET_DIAG=m CONFIG_UNIX=y +CONFIG_UNIX_DIAG=m +CONFIG_XFRM_MIGRATE=y CONFIG_NET_KEY=y -CONFIG_NET_KEY_MIGRATE=y CONFIG_INET=y CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y CONFIG_IP_PNP_RARP=y CONFIG_NET_IPIP=m +CONFIG_NET_IPGRE_DEMUX=m CONFIG_NET_IPGRE=m CONFIG_SYN_COOKIES=y +CONFIG_NET_IPVTI=m CONFIG_INET_AH=m CONFIG_INET_ESP=m CONFIG_INET_IPCOMP=m CONFIG_INET_XFRM_MODE_TRANSPORT=m CONFIG_INET_XFRM_MODE_TUNNEL=m CONFIG_INET_XFRM_MODE_BEET=m +# CONFIG_INET_LRO is not set CONFIG_INET_DIAG=m +CONFIG_INET_UDP_DIAG=m CONFIG_IPV6_PRIVACY=y CONFIG_IPV6_ROUTER_PREF=y -CONFIG_IPV6_ROUTE_INFO=y CONFIG_INET6_AH=m CONFIG_INET6_ESP=m CONFIG_INET6_IPCOMP=m -CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m -CONFIG_IPV6_TUNNEL=m +CONFIG_IPV6_GRE=m CONFIG_NETFILTER=y -CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NF_CONNTRACK=m +CONFIG_NF_CONNTRACK_ZONES=y +# CONFIG_NF_CONNTRACK_PROCFS is not set # CONFIG_NF_CT_PROTO_DCCP is not set CONFIG_NF_CT_PROTO_UDPLITE=m CONFIG_NF_CONNTRACK_AMANDA=m @@ -52,25 +73,37 @@ CONFIG_NF_CONNTRACK_FTP=m CONFIG_NF_CONNTRACK_H323=m CONFIG_NF_CONNTRACK_IRC=m CONFIG_NF_CONNTRACK_NETBIOS_NS=m +CONFIG_NF_CONNTRACK_SNMP=m CONFIG_NF_CONNTRACK_PPTP=m CONFIG_NF_CONNTRACK_SANE=m CONFIG_NF_CONNTRACK_SIP=m CONFIG_NF_CONNTRACK_TFTP=m +CONFIG_NETFILTER_XT_SET=m +CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m CONFIG_NETFILTER_XT_TARGET_CONNMARK=m CONFIG_NETFILTER_XT_TARGET_DSCP=m +CONFIG_NETFILTER_XT_TARGET_HMARK=m +CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m +CONFIG_NETFILTER_XT_TARGET_LOG=m CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFLOG=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m +CONFIG_NETFILTER_XT_TARGET_NOTRACK=m +CONFIG_NETFILTER_XT_TARGET_TEE=m CONFIG_NETFILTER_XT_TARGET_TRACE=m CONFIG_NETFILTER_XT_TARGET_TCPMSS=m CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m +CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m +CONFIG_NETFILTER_XT_MATCH_BPF=m CONFIG_NETFILTER_XT_MATCH_CLUSTER=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m +CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m CONFIG_NETFILTER_XT_MATCH_CONNMARK=m CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m +CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m CONFIG_NETFILTER_XT_MATCH_DSCP=m CONFIG_NETFILTER_XT_MATCH_ESP=m CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m @@ -81,6 +114,8 @@ CONFIG_NETFILTER_XT_MATCH_LIMIT=m CONFIG_NETFILTER_XT_MATCH_MAC=m CONFIG_NETFILTER_XT_MATCH_MARK=m CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m +CONFIG_NETFILTER_XT_MATCH_NFACCT=m +CONFIG_NETFILTER_XT_MATCH_OSF=m CONFIG_NETFILTER_XT_MATCH_OWNER=m CONFIG_NETFILTER_XT_MATCH_POLICY=m CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m @@ -94,22 +129,31 @@ CONFIG_NETFILTER_XT_MATCH_STRING=m CONFIG_NETFILTER_XT_MATCH_TCPMSS=m CONFIG_NETFILTER_XT_MATCH_TIME=m CONFIG_NETFILTER_XT_MATCH_U32=m +CONFIG_IP_SET=m +CONFIG_IP_SET_BITMAP_IP=m +CONFIG_IP_SET_BITMAP_IPMAC=m +CONFIG_IP_SET_BITMAP_PORT=m +CONFIG_IP_SET_HASH_IP=m +CONFIG_IP_SET_HASH_IPPORT=m +CONFIG_IP_SET_HASH_IPPORTIP=m +CONFIG_IP_SET_HASH_IPPORTNET=m +CONFIG_IP_SET_HASH_NET=m +CONFIG_IP_SET_HASH_NETPORT=m +CONFIG_IP_SET_HASH_NETIFACE=m +CONFIG_IP_SET_LIST_SET=m CONFIG_NF_CONNTRACK_IPV4=m -CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_ADDRTYPE=m CONFIG_IP_NF_MATCH_AH=m CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_RPFILTER=m CONFIG_IP_NF_MATCH_TTL=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_LOG=m CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_NF_NAT=m +CONFIG_NF_NAT_IPV4=m CONFIG_IP_NF_TARGET_MASQUERADE=m CONFIG_IP_NF_TARGET_NETMAP=m CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_NF_NAT_SNMP_BASIC=m CONFIG_IP_NF_MANGLE=m CONFIG_IP_NF_TARGET_CLUSTERIP=m CONFIG_IP_NF_TARGET_ECN=m @@ -119,7 +163,6 @@ CONFIG_IP_NF_ARPTABLES=m CONFIG_IP_NF_ARPFILTER=m CONFIG_IP_NF_ARP_MANGLE=m CONFIG_NF_CONNTRACK_IPV6=m -CONFIG_IP6_NF_QUEUE=m CONFIG_IP6_NF_IPTABLES=m CONFIG_IP6_NF_MATCH_AH=m CONFIG_IP6_NF_MATCH_EUI64=m @@ -128,21 +171,34 @@ CONFIG_IP6_NF_MATCH_OPTS=m CONFIG_IP6_NF_MATCH_HL=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m CONFIG_IP6_NF_MATCH_MH=m +CONFIG_IP6_NF_MATCH_RPFILTER=m CONFIG_IP6_NF_MATCH_RT=m CONFIG_IP6_NF_TARGET_HL=m -CONFIG_IP6_NF_TARGET_LOG=m CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_REJECT=m CONFIG_IP6_NF_MANGLE=m CONFIG_IP6_NF_RAW=m +CONFIG_NF_NAT_IPV6=m +CONFIG_IP6_NF_TARGET_MASQUERADE=m +CONFIG_IP6_NF_TARGET_NPT=m CONFIG_IP_DCCP=m # CONFIG_IP_DCCP_CCID3 is not set +CONFIG_SCTP_COOKIE_HMAC_SHA1=y +CONFIG_RDS=m +CONFIG_RDS_TCP=m +CONFIG_L2TP=m CONFIG_ATALK=m +CONFIG_BATMAN_ADV=m +CONFIG_BATMAN_ADV_DAT=y +# CONFIG_WIRELESS is not set CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y # CONFIG_FIRMWARE_IN_KERNEL is not set +# CONFIG_FW_LOADER_USER_HELPER is not set CONFIG_CONNECTOR=m CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_CRYPTOLOOP=m +CONFIG_BLK_DEV_DRBD=m CONFIG_BLK_DEV_NBD=m CONFIG_BLK_DEV_RAM=y CONFIG_CDROM_PKTCDVD=m @@ -157,107 +213,136 @@ CONFIG_BLK_DEV_SR=y CONFIG_BLK_DEV_SR_VENDOR=y CONFIG_CHR_DEV_SG=m CONFIG_SCSI_CONSTANTS=y -CONFIG_SCSI_SAS_LIBSAS=m -# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set -CONFIG_SCSI_SRP_ATTRS=m -CONFIG_SCSI_SRP_TGT_ATTRS=y +CONFIG_SCSI_SAS_ATTRS=m CONFIG_ISCSI_TCP=m +CONFIG_ISCSI_BOOT_SYSFS=m CONFIG_SUN3_SCSI=y CONFIG_MD=y -CONFIG_BLK_DEV_MD=m CONFIG_MD_LINEAR=m CONFIG_MD_RAID0=m -CONFIG_MD_RAID1=m -CONFIG_MD_RAID456=m CONFIG_BLK_DEV_DM=m CONFIG_DM_CRYPT=m CONFIG_DM_SNAPSHOT=m +CONFIG_DM_THIN_PROVISIONING=m +CONFIG_DM_CACHE=m CONFIG_DM_MIRROR=m +CONFIG_DM_RAID=m CONFIG_DM_ZERO=m CONFIG_DM_MULTIPATH=m CONFIG_DM_UEVENT=y +CONFIG_TARGET_CORE=m +CONFIG_TCM_IBLOCK=m +CONFIG_TCM_FILEIO=m +CONFIG_TCM_PSCSI=m CONFIG_NETDEVICES=y CONFIG_DUMMY=m -CONFIG_MACVLAN=m CONFIG_EQUALIZER=m +CONFIG_NET_TEAM=m +CONFIG_NET_TEAM_MODE_BROADCAST=m +CONFIG_NET_TEAM_MODE_ROUNDROBIN=m +CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m +CONFIG_NET_TEAM_MODE_LOADBALANCE=m +CONFIG_VXLAN=m +CONFIG_NETCONSOLE=m +CONFIG_NETCONSOLE_DYNAMIC=y CONFIG_VETH=m -CONFIG_NET_ETHERNET=y CONFIG_SUN3LANCE=y +# CONFIG_NET_CADENCE is not set CONFIG_SUN3_82586=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set +# CONFIG_NET_VENDOR_MARVELL is not set +# CONFIG_NET_VENDOR_MICREL is not set +# CONFIG_NET_VENDOR_NATSEMI is not set +# CONFIG_NET_VENDOR_SEEQ is not set +# CONFIG_NET_VENDOR_STMICRO is not set +# CONFIG_NET_VENDOR_SUN is not set +# CONFIG_NET_VENDOR_WIZNET is not set CONFIG_PPP=m -CONFIG_PPP_FILTER=y -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m -CONFIG_PPP_DEFLATE=m CONFIG_PPP_BSDCOMP=m +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_FILTER=y CONFIG_PPP_MPPE=m CONFIG_PPPOE=m +CONFIG_PPTP=m +CONFIG_PPPOL2TP=m +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m CONFIG_SLIP=m CONFIG_SLIP_COMPRESSED=y CONFIG_SLIP_SMART=y CONFIG_SLIP_MODE_SLIP6=y -CONFIG_NETCONSOLE=m -CONFIG_NETCONSOLE_DYNAMIC=y -CONFIG_INPUT_FF_MEMLESS=m +# CONFIG_WLAN is not set +CONFIG_INPUT_EVDEV=m # CONFIG_KEYBOARD_ATKBD is not set CONFIG_KEYBOARD_SUNKBD=y -CONFIG_MOUSE_PS2=m +# CONFIG_MOUSE_PS2 is not set CONFIG_MOUSE_SERIAL=m -# CONFIG_SERIO_SERPORT is not set CONFIG_VT_HW_CONSOLE_BINDING=y +# CONFIG_LEGACY_PTYS is not set # CONFIG_DEVKMEM is not set # CONFIG_HW_RANDOM is not set -CONFIG_GEN_RTC=m -CONFIG_GEN_RTC_X=y +CONFIG_NTP_PPS=y +CONFIG_PPS_CLIENT_LDISC=m +CONFIG_PTP_1588_CLOCK=m # CONFIG_HWMON is not set CONFIG_FB=y CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_LOGO=y CONFIG_HID=m CONFIG_HIDRAW=y +CONFIG_UHID=m +# CONFIG_HID_GENERIC is not set # CONFIG_USB_SUPPORT is not set +CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_GENERIC=m +# CONFIG_IOMMU_SUPPORT is not set +CONFIG_PROC_HARDWARE=y CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set # CONFIG_EXT3_FS_XATTR is not set +CONFIG_EXT4_FS=y CONFIG_REISERFS_FS=m CONFIG_JFS_FS=m CONFIG_XFS_FS=m CONFIG_OCFS2_FS=m -# CONFIG_OCFS2_FS_STATS is not set # CONFIG_OCFS2_DEBUG_MASKLOG is not set +CONFIG_FANOTIFY=y CONFIG_QUOTA_NETLINK_INTERFACE=y # CONFIG_PRINT_QUOTA_WARNING is not set -CONFIG_AUTOFS_FS=m CONFIG_AUTOFS4_FS=m CONFIG_FUSE_FS=m +CONFIG_CUSE=m CONFIG_ISO9660_FS=y CONFIG_JOLIET=y CONFIG_ZISOFS=y CONFIG_UDF_FS=m -CONFIG_MSDOS_FS=y +CONFIG_MSDOS_FS=m CONFIG_VFAT_FS=m CONFIG_PROC_KCORE=y CONFIG_TMPFS=y CONFIG_AFFS_FS=m +CONFIG_ECRYPT_FS=m +CONFIG_ECRYPT_FS_MESSAGING=y CONFIG_HFS_FS=m CONFIG_HFSPLUS_FS=m CONFIG_CRAMFS=m CONFIG_SQUASHFS=m -CONFIG_MINIX_FS=y +CONFIG_SQUASHFS_LZO=y +CONFIG_MINIX_FS=m +CONFIG_OMFS_FS=m CONFIG_HPFS_FS=m +CONFIG_QNX4FS_FS=m +CONFIG_QNX6FS_FS=m CONFIG_SYSV_FS=m CONFIG_UFS_FS=m CONFIG_NFS_FS=y -CONFIG_NFS_V3=y CONFIG_NFS_V4=y +CONFIG_NFS_SWAP=y CONFIG_ROOT_NFS=y CONFIG_NFSD=m CONFIG_NFSD_V3=y -CONFIG_SMB_FS=m -CONFIG_SMB_NLS_DEFAULT=y +CONFIG_CIFS=m +# CONFIG_CIFS_DEBUG is not set CONFIG_CODA_FS=m CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_CODEPAGE_737=m @@ -296,10 +381,23 @@ CONFIG_NLS_ISO8859_14=m CONFIG_NLS_ISO8859_15=m CONFIG_NLS_KOI8_R=m CONFIG_NLS_KOI8_U=m +CONFIG_NLS_MAC_ROMAN=m +CONFIG_NLS_MAC_CELTIC=m +CONFIG_NLS_MAC_CENTEURO=m +CONFIG_NLS_MAC_CROATIAN=m +CONFIG_NLS_MAC_CYRILLIC=m +CONFIG_NLS_MAC_GAELIC=m +CONFIG_NLS_MAC_GREEK=m +CONFIG_NLS_MAC_ICELAND=m +CONFIG_NLS_MAC_INUIT=m +CONFIG_NLS_MAC_ROMANIAN=m +CONFIG_NLS_MAC_TURKISH=m CONFIG_DLM=m CONFIG_MAGIC_SYSRQ=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_ASYNC_RAID6_TEST=m +CONFIG_ENCRYPTED_KEYS=m +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_USER=m CONFIG_CRYPTO_NULL=m CONFIG_CRYPTO_CRYPTD=m CONFIG_CRYPTO_TEST=m @@ -309,19 +407,16 @@ CONFIG_CRYPTO_CTS=m CONFIG_CRYPTO_LRW=m CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_XTS=m -CONFIG_CRYPTO_HMAC=y CONFIG_CRYPTO_XCBC=m -CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_VMAC=m CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_RMD128=m CONFIG_CRYPTO_RMD160=m CONFIG_CRYPTO_RMD256=m CONFIG_CRYPTO_RMD320=m -CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m CONFIG_CRYPTO_TGR192=m CONFIG_CRYPTO_WP512=m -CONFIG_CRYPTO_AES=m CONFIG_CRYPTO_ANUBIS=m CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_CAMELLIA=m @@ -337,6 +432,14 @@ CONFIG_CRYPTO_TWOFISH=m CONFIG_CRYPTO_ZLIB=m CONFIG_CRYPTO_LZO=m # CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_USER_API_HASH=m +CONFIG_CRYPTO_USER_API_SKCIPHER=m # CONFIG_CRYPTO_HW is not set -CONFIG_CRC16=m CONFIG_CRC_T10DIF=y +CONFIG_XZ_DEC_X86=y +CONFIG_XZ_DEC_POWERPC=y +CONFIG_XZ_DEC_IA64=y +CONFIG_XZ_DEC_ARM=y +CONFIG_XZ_DEC_ARMTHUMB=y +CONFIG_XZ_DEC_SPARC=y +CONFIG_XZ_DEC_TEST=m diff --git a/arch/m68k/configs/sun3x_defconfig b/arch/m68k/configs/sun3x_defconfig index c80941c7759e..832d9539f441 100644 --- a/arch/m68k/configs/sun3x_defconfig +++ b/arch/m68k/configs/sun3x_defconfig @@ -1,50 +1,71 @@ -CONFIG_EXPERIMENTAL=y CONFIG_LOCALVERSION="-sun3x" CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y +CONFIG_FHANDLE=y CONFIG_BSD_PROCESS_ACCT=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_RELAY=y +CONFIG_BSD_PROCESS_ACCT_V3=y +CONFIG_LOG_BUF_SHIFT=16 +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +# CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SLAB=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y +CONFIG_PARTITION_ADVANCED=y +CONFIG_AMIGA_PARTITION=y +CONFIG_ATARI_PARTITION=y +CONFIG_MAC_PARTITION=y +CONFIG_BSD_DISKLABEL=y +CONFIG_MINIX_SUBPARTITION=y +CONFIG_SOLARIS_X86_PARTITION=y +CONFIG_UNIXWARE_DISKLABEL=y +# CONFIG_EFI_PARTITION is not set +CONFIG_SYSV68_PARTITION=y +CONFIG_IOSCHED_DEADLINE=m CONFIG_SUN3X=y +# CONFIG_COMPACTION is not set +CONFIG_CLEANCACHE=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set CONFIG_BINFMT_AOUT=m CONFIG_BINFMT_MISC=m -CONFIG_PROC_HARDWARE=y CONFIG_NET=y CONFIG_PACKET=y +CONFIG_PACKET_DIAG=m CONFIG_UNIX=y +CONFIG_UNIX_DIAG=m +CONFIG_XFRM_MIGRATE=y CONFIG_NET_KEY=y -CONFIG_NET_KEY_MIGRATE=y CONFIG_INET=y CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y CONFIG_IP_PNP_RARP=y CONFIG_NET_IPIP=m +CONFIG_NET_IPGRE_DEMUX=m CONFIG_NET_IPGRE=m CONFIG_SYN_COOKIES=y +CONFIG_NET_IPVTI=m CONFIG_INET_AH=m CONFIG_INET_ESP=m CONFIG_INET_IPCOMP=m CONFIG_INET_XFRM_MODE_TRANSPORT=m CONFIG_INET_XFRM_MODE_TUNNEL=m CONFIG_INET_XFRM_MODE_BEET=m +# CONFIG_INET_LRO is not set CONFIG_INET_DIAG=m +CONFIG_INET_UDP_DIAG=m CONFIG_IPV6_PRIVACY=y CONFIG_IPV6_ROUTER_PREF=y -CONFIG_IPV6_ROUTE_INFO=y CONFIG_INET6_AH=m CONFIG_INET6_ESP=m CONFIG_INET6_IPCOMP=m -CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m -CONFIG_IPV6_TUNNEL=m +CONFIG_IPV6_GRE=m CONFIG_NETFILTER=y -CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NF_CONNTRACK=m +CONFIG_NF_CONNTRACK_ZONES=y +# CONFIG_NF_CONNTRACK_PROCFS is not set # CONFIG_NF_CT_PROTO_DCCP is not set CONFIG_NF_CT_PROTO_UDPLITE=m CONFIG_NF_CONNTRACK_AMANDA=m @@ -52,25 +73,37 @@ CONFIG_NF_CONNTRACK_FTP=m CONFIG_NF_CONNTRACK_H323=m CONFIG_NF_CONNTRACK_IRC=m CONFIG_NF_CONNTRACK_NETBIOS_NS=m +CONFIG_NF_CONNTRACK_SNMP=m CONFIG_NF_CONNTRACK_PPTP=m CONFIG_NF_CONNTRACK_SANE=m CONFIG_NF_CONNTRACK_SIP=m CONFIG_NF_CONNTRACK_TFTP=m +CONFIG_NETFILTER_XT_SET=m +CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m CONFIG_NETFILTER_XT_TARGET_CONNMARK=m CONFIG_NETFILTER_XT_TARGET_DSCP=m +CONFIG_NETFILTER_XT_TARGET_HMARK=m +CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m +CONFIG_NETFILTER_XT_TARGET_LOG=m CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFLOG=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m +CONFIG_NETFILTER_XT_TARGET_NOTRACK=m +CONFIG_NETFILTER_XT_TARGET_TEE=m CONFIG_NETFILTER_XT_TARGET_TRACE=m CONFIG_NETFILTER_XT_TARGET_TCPMSS=m CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m +CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m +CONFIG_NETFILTER_XT_MATCH_BPF=m CONFIG_NETFILTER_XT_MATCH_CLUSTER=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m +CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m CONFIG_NETFILTER_XT_MATCH_CONNMARK=m CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m +CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m CONFIG_NETFILTER_XT_MATCH_DSCP=m CONFIG_NETFILTER_XT_MATCH_ESP=m CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m @@ -81,6 +114,8 @@ CONFIG_NETFILTER_XT_MATCH_LIMIT=m CONFIG_NETFILTER_XT_MATCH_MAC=m CONFIG_NETFILTER_XT_MATCH_MARK=m CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m +CONFIG_NETFILTER_XT_MATCH_NFACCT=m +CONFIG_NETFILTER_XT_MATCH_OSF=m CONFIG_NETFILTER_XT_MATCH_OWNER=m CONFIG_NETFILTER_XT_MATCH_POLICY=m CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m @@ -94,22 +129,31 @@ CONFIG_NETFILTER_XT_MATCH_STRING=m CONFIG_NETFILTER_XT_MATCH_TCPMSS=m CONFIG_NETFILTER_XT_MATCH_TIME=m CONFIG_NETFILTER_XT_MATCH_U32=m +CONFIG_IP_SET=m +CONFIG_IP_SET_BITMAP_IP=m +CONFIG_IP_SET_BITMAP_IPMAC=m +CONFIG_IP_SET_BITMAP_PORT=m +CONFIG_IP_SET_HASH_IP=m +CONFIG_IP_SET_HASH_IPPORT=m +CONFIG_IP_SET_HASH_IPPORTIP=m +CONFIG_IP_SET_HASH_IPPORTNET=m +CONFIG_IP_SET_HASH_NET=m +CONFIG_IP_SET_HASH_NETPORT=m +CONFIG_IP_SET_HASH_NETIFACE=m +CONFIG_IP_SET_LIST_SET=m CONFIG_NF_CONNTRACK_IPV4=m -CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_ADDRTYPE=m CONFIG_IP_NF_MATCH_AH=m CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_RPFILTER=m CONFIG_IP_NF_MATCH_TTL=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_LOG=m CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_NF_NAT=m +CONFIG_NF_NAT_IPV4=m CONFIG_IP_NF_TARGET_MASQUERADE=m CONFIG_IP_NF_TARGET_NETMAP=m CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_NF_NAT_SNMP_BASIC=m CONFIG_IP_NF_MANGLE=m CONFIG_IP_NF_TARGET_CLUSTERIP=m CONFIG_IP_NF_TARGET_ECN=m @@ -119,7 +163,6 @@ CONFIG_IP_NF_ARPTABLES=m CONFIG_IP_NF_ARPFILTER=m CONFIG_IP_NF_ARP_MANGLE=m CONFIG_NF_CONNTRACK_IPV6=m -CONFIG_IP6_NF_QUEUE=m CONFIG_IP6_NF_IPTABLES=m CONFIG_IP6_NF_MATCH_AH=m CONFIG_IP6_NF_MATCH_EUI64=m @@ -128,21 +171,34 @@ CONFIG_IP6_NF_MATCH_OPTS=m CONFIG_IP6_NF_MATCH_HL=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m CONFIG_IP6_NF_MATCH_MH=m +CONFIG_IP6_NF_MATCH_RPFILTER=m CONFIG_IP6_NF_MATCH_RT=m CONFIG_IP6_NF_TARGET_HL=m -CONFIG_IP6_NF_TARGET_LOG=m CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_REJECT=m CONFIG_IP6_NF_MANGLE=m CONFIG_IP6_NF_RAW=m +CONFIG_NF_NAT_IPV6=m +CONFIG_IP6_NF_TARGET_MASQUERADE=m +CONFIG_IP6_NF_TARGET_NPT=m CONFIG_IP_DCCP=m # CONFIG_IP_DCCP_CCID3 is not set +CONFIG_SCTP_COOKIE_HMAC_SHA1=y +CONFIG_RDS=m +CONFIG_RDS_TCP=m +CONFIG_L2TP=m CONFIG_ATALK=m +CONFIG_BATMAN_ADV=m +CONFIG_BATMAN_ADV_DAT=y +# CONFIG_WIRELESS is not set CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y # CONFIG_FIRMWARE_IN_KERNEL is not set +# CONFIG_FW_LOADER_USER_HELPER is not set CONFIG_CONNECTOR=m CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_CRYPTOLOOP=m +CONFIG_BLK_DEV_DRBD=m CONFIG_BLK_DEV_NBD=m CONFIG_BLK_DEV_RAM=y CONFIG_CDROM_PKTCDVD=m @@ -157,106 +213,136 @@ CONFIG_BLK_DEV_SR=y CONFIG_BLK_DEV_SR_VENDOR=y CONFIG_CHR_DEV_SG=m CONFIG_SCSI_CONSTANTS=y -CONFIG_SCSI_SAS_LIBSAS=m -# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set -CONFIG_SCSI_SRP_ATTRS=m -CONFIG_SCSI_SRP_TGT_ATTRS=y +CONFIG_SCSI_SAS_ATTRS=m CONFIG_ISCSI_TCP=m +CONFIG_ISCSI_BOOT_SYSFS=m CONFIG_SUN3X_ESP=y CONFIG_MD=y -CONFIG_BLK_DEV_MD=m CONFIG_MD_LINEAR=m CONFIG_MD_RAID0=m -CONFIG_MD_RAID1=m -CONFIG_MD_RAID456=m CONFIG_BLK_DEV_DM=m CONFIG_DM_CRYPT=m CONFIG_DM_SNAPSHOT=m +CONFIG_DM_THIN_PROVISIONING=m +CONFIG_DM_CACHE=m CONFIG_DM_MIRROR=m +CONFIG_DM_RAID=m CONFIG_DM_ZERO=m CONFIG_DM_MULTIPATH=m CONFIG_DM_UEVENT=y +CONFIG_TARGET_CORE=m +CONFIG_TCM_IBLOCK=m +CONFIG_TCM_FILEIO=m +CONFIG_TCM_PSCSI=m CONFIG_NETDEVICES=y CONFIG_DUMMY=m -CONFIG_MACVLAN=m CONFIG_EQUALIZER=m +CONFIG_NET_TEAM=m +CONFIG_NET_TEAM_MODE_BROADCAST=m +CONFIG_NET_TEAM_MODE_ROUNDROBIN=m +CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m +CONFIG_NET_TEAM_MODE_LOADBALANCE=m +CONFIG_VXLAN=m +CONFIG_NETCONSOLE=m +CONFIG_NETCONSOLE_DYNAMIC=y CONFIG_VETH=m -CONFIG_NET_ETHERNET=y CONFIG_SUN3LANCE=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set +# CONFIG_NET_CADENCE is not set +# CONFIG_NET_VENDOR_BROADCOM is not set +# CONFIG_NET_VENDOR_INTEL is not set +# CONFIG_NET_VENDOR_MARVELL is not set +# CONFIG_NET_VENDOR_MICREL is not set +# CONFIG_NET_VENDOR_NATSEMI is not set +# CONFIG_NET_VENDOR_SEEQ is not set +# CONFIG_NET_VENDOR_STMICRO is not set +# CONFIG_NET_VENDOR_WIZNET is not set CONFIG_PPP=m -CONFIG_PPP_FILTER=y -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m -CONFIG_PPP_DEFLATE=m CONFIG_PPP_BSDCOMP=m +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_FILTER=y CONFIG_PPP_MPPE=m CONFIG_PPPOE=m +CONFIG_PPTP=m +CONFIG_PPPOL2TP=m +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m CONFIG_SLIP=m CONFIG_SLIP_COMPRESSED=y CONFIG_SLIP_SMART=y CONFIG_SLIP_MODE_SLIP6=y -CONFIG_NETCONSOLE=m -CONFIG_NETCONSOLE_DYNAMIC=y -CONFIG_INPUT_FF_MEMLESS=m +# CONFIG_WLAN is not set +CONFIG_INPUT_EVDEV=m # CONFIG_KEYBOARD_ATKBD is not set CONFIG_KEYBOARD_SUNKBD=y -CONFIG_MOUSE_PS2=m +# CONFIG_MOUSE_PS2 is not set CONFIG_MOUSE_SERIAL=m -# CONFIG_SERIO_SERPORT is not set CONFIG_VT_HW_CONSOLE_BINDING=y +# CONFIG_LEGACY_PTYS is not set # CONFIG_DEVKMEM is not set # CONFIG_HW_RANDOM is not set -CONFIG_GEN_RTC=m -CONFIG_GEN_RTC_X=y +CONFIG_NTP_PPS=y +CONFIG_PPS_CLIENT_LDISC=m +CONFIG_PTP_1588_CLOCK=m # CONFIG_HWMON is not set CONFIG_FB=y CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_LOGO=y CONFIG_HID=m CONFIG_HIDRAW=y +CONFIG_UHID=m +# CONFIG_HID_GENERIC is not set # CONFIG_USB_SUPPORT is not set +CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_GENERIC=m +# CONFIG_IOMMU_SUPPORT is not set +CONFIG_PROC_HARDWARE=y CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set # CONFIG_EXT3_FS_XATTR is not set +CONFIG_EXT4_FS=y CONFIG_REISERFS_FS=m CONFIG_JFS_FS=m CONFIG_XFS_FS=m CONFIG_OCFS2_FS=m -# CONFIG_OCFS2_FS_STATS is not set # CONFIG_OCFS2_DEBUG_MASKLOG is not set +CONFIG_FANOTIFY=y CONFIG_QUOTA_NETLINK_INTERFACE=y # CONFIG_PRINT_QUOTA_WARNING is not set -CONFIG_AUTOFS_FS=m CONFIG_AUTOFS4_FS=m CONFIG_FUSE_FS=m +CONFIG_CUSE=m CONFIG_ISO9660_FS=y CONFIG_JOLIET=y CONFIG_ZISOFS=y CONFIG_UDF_FS=m -CONFIG_MSDOS_FS=y +CONFIG_MSDOS_FS=m CONFIG_VFAT_FS=m CONFIG_PROC_KCORE=y CONFIG_TMPFS=y CONFIG_AFFS_FS=m +CONFIG_ECRYPT_FS=m +CONFIG_ECRYPT_FS_MESSAGING=y CONFIG_HFS_FS=m CONFIG_HFSPLUS_FS=m CONFIG_CRAMFS=m CONFIG_SQUASHFS=m -CONFIG_MINIX_FS=y +CONFIG_SQUASHFS_LZO=y +CONFIG_MINIX_FS=m +CONFIG_OMFS_FS=m CONFIG_HPFS_FS=m +CONFIG_QNX4FS_FS=m +CONFIG_QNX6FS_FS=m CONFIG_SYSV_FS=m CONFIG_UFS_FS=m CONFIG_NFS_FS=y -CONFIG_NFS_V3=y CONFIG_NFS_V4=y +CONFIG_NFS_SWAP=y CONFIG_ROOT_NFS=y CONFIG_NFSD=m CONFIG_NFSD_V3=y -CONFIG_SMB_FS=m -CONFIG_SMB_NLS_DEFAULT=y +CONFIG_CIFS=m +# CONFIG_CIFS_DEBUG is not set CONFIG_CODA_FS=m CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_CODEPAGE_737=m @@ -295,10 +381,23 @@ CONFIG_NLS_ISO8859_14=m CONFIG_NLS_ISO8859_15=m CONFIG_NLS_KOI8_R=m CONFIG_NLS_KOI8_U=m +CONFIG_NLS_MAC_ROMAN=m +CONFIG_NLS_MAC_CELTIC=m +CONFIG_NLS_MAC_CENTEURO=m +CONFIG_NLS_MAC_CROATIAN=m +CONFIG_NLS_MAC_CYRILLIC=m +CONFIG_NLS_MAC_GAELIC=m +CONFIG_NLS_MAC_GREEK=m +CONFIG_NLS_MAC_ICELAND=m +CONFIG_NLS_MAC_INUIT=m +CONFIG_NLS_MAC_ROMANIAN=m +CONFIG_NLS_MAC_TURKISH=m CONFIG_DLM=m CONFIG_MAGIC_SYSRQ=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_ASYNC_RAID6_TEST=m +CONFIG_ENCRYPTED_KEYS=m +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_USER=m CONFIG_CRYPTO_NULL=m CONFIG_CRYPTO_CRYPTD=m CONFIG_CRYPTO_TEST=m @@ -308,19 +407,16 @@ CONFIG_CRYPTO_CTS=m CONFIG_CRYPTO_LRW=m CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_XTS=m -CONFIG_CRYPTO_HMAC=y CONFIG_CRYPTO_XCBC=m -CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_VMAC=m CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_RMD128=m CONFIG_CRYPTO_RMD160=m CONFIG_CRYPTO_RMD256=m CONFIG_CRYPTO_RMD320=m -CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m CONFIG_CRYPTO_TGR192=m CONFIG_CRYPTO_WP512=m -CONFIG_CRYPTO_AES=m CONFIG_CRYPTO_ANUBIS=m CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_CAMELLIA=m @@ -336,6 +432,14 @@ CONFIG_CRYPTO_TWOFISH=m CONFIG_CRYPTO_ZLIB=m CONFIG_CRYPTO_LZO=m # CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_USER_API_HASH=m +CONFIG_CRYPTO_USER_API_SKCIPHER=m # CONFIG_CRYPTO_HW is not set -CONFIG_CRC16=m CONFIG_CRC_T10DIF=y +CONFIG_XZ_DEC_X86=y +CONFIG_XZ_DEC_POWERPC=y +CONFIG_XZ_DEC_IA64=y +CONFIG_XZ_DEC_ARM=y +CONFIG_XZ_DEC_ARMTHUMB=y +CONFIG_XZ_DEC_SPARC=y +CONFIG_XZ_DEC_TEST=m -- cgit v1.2.3 From d5b4c2f4938aaebc392669111385c3cf50dd309f Mon Sep 17 00:00:00 2001 From: Chen Gang Date: Mon, 27 May 2013 17:55:13 +0800 Subject: arch: s390: appldata: using strncpy() and strnlen() instead of sprintf() 'buf[2]' is 2 bytes length, and sprintf() will append '\0' at the end of string "?\n", so original implementation is memory overflow. Need use strncpy() and strnlen() instead of sprintf(). Signed-off-by: Chen Gang Signed-off-by: Gerald Schaefer Signed-off-by: Martin Schwidefsky --- arch/s390/appldata/appldata_base.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/arch/s390/appldata/appldata_base.c b/arch/s390/appldata/appldata_base.c index bae0f402bf2a..87a22092b68f 100644 --- a/arch/s390/appldata/appldata_base.c +++ b/arch/s390/appldata/appldata_base.c @@ -212,7 +212,9 @@ appldata_timer_handler(ctl_table *ctl, int write, return 0; } if (!write) { - len = sprintf(buf, appldata_timer_active ? "1\n" : "0\n"); + strncpy(buf, appldata_timer_active ? "1\n" : "0\n", + ARRAY_SIZE(buf)); + len = strnlen(buf, ARRAY_SIZE(buf)); if (len > *lenp) len = *lenp; if (copy_to_user(buffer, buf, len)) @@ -317,7 +319,8 @@ appldata_generic_handler(ctl_table *ctl, int write, return 0; } if (!write) { - len = sprintf(buf, ops->active ? "1\n" : "0\n"); + strncpy(buf, ops->active ? "1\n" : "0\n", ARRAY_SIZE(buf)); + len = strnlen(buf, ARRAY_SIZE(buf)); if (len > *lenp) len = *lenp; if (copy_to_user(buffer, buf, len)) { -- cgit v1.2.3 From b56433cb782d1cc7e44fc46d2ce3917fa75d2236 Mon Sep 17 00:00:00 2001 From: Christian Borntraeger Date: Mon, 27 May 2013 16:19:55 +0200 Subject: s390/pgtable: Fix check for pgste/storage key handling pte_present might return true on PAGE_TYPE_NONE, even if the invalid bit is on. Modify the existing check of the pgste functions to avoid crashes. [ Martin Schwidefsky: added ptep_modify_prot_[start|commit] bits ] Reported-by: Martin Schwidefky Signed-off-by: Christian Borntraeger CC: stable@vger.kernel.org Signed-off-by: Martin Schwidefsky --- arch/s390/include/asm/pgtable.h | 15 +++++++++++---- 1 file changed, 11 insertions(+), 4 deletions(-) diff --git a/arch/s390/include/asm/pgtable.h b/arch/s390/include/asm/pgtable.h index 0f0de30e3e3f..ac01463038f1 100644 --- a/arch/s390/include/asm/pgtable.h +++ b/arch/s390/include/asm/pgtable.h @@ -646,7 +646,7 @@ static inline pgste_t pgste_update_all(pte_t *ptep, pgste_t pgste) unsigned long address, bits; unsigned char skey; - if (!pte_present(*ptep)) + if (pte_val(*ptep) & _PAGE_INVALID) return pgste; address = pte_val(*ptep) & PAGE_MASK; skey = page_get_storage_key(address); @@ -680,7 +680,7 @@ static inline pgste_t pgste_update_young(pte_t *ptep, pgste_t pgste) #ifdef CONFIG_PGSTE int young; - if (!pte_present(*ptep)) + if (pte_val(*ptep) & _PAGE_INVALID) return pgste; /* Get referenced bit from storage key */ young = page_reset_referenced(pte_val(*ptep) & PAGE_MASK); @@ -706,7 +706,7 @@ static inline void pgste_set_key(pte_t *ptep, pgste_t pgste, pte_t entry) unsigned long address; unsigned long okey, nkey; - if (!pte_present(entry)) + if (pte_val(entry) & _PAGE_INVALID) return; address = pte_val(entry) & PAGE_MASK; okey = nkey = page_get_storage_key(address); @@ -1098,6 +1098,9 @@ static inline pte_t ptep_modify_prot_start(struct mm_struct *mm, pte = *ptep; if (!mm_exclusive(mm)) __ptep_ipte(address, ptep); + + if (mm_has_pgste(mm)) + pgste = pgste_update_all(&pte, pgste); return pte; } @@ -1105,9 +1108,13 @@ static inline void ptep_modify_prot_commit(struct mm_struct *mm, unsigned long address, pte_t *ptep, pte_t pte) { + pgste_t pgste; + if (mm_has_pgste(mm)) { + pgste = *(pgste_t *)(ptep + PTRS_PER_PTE); + pgste_set_key(ptep, pgste, pte); pgste_set_pte(ptep, pte); - pgste_set_unlock(ptep, *(pgste_t *)(ptep + PTRS_PER_PTE)); + pgste_set_unlock(ptep, pgste); } else *ptep = pte; } -- cgit v1.2.3 From 1d7004f0593f631b78745e4c835d8e09b31f4996 Mon Sep 17 00:00:00 2001 From: Frederico Cadete Date: Sat, 25 May 2013 22:48:57 +0200 Subject: xmem/tmem: fix 'undefined variable' build error. In the (not so useful) kernel configuration where CONFIG_SWAP is undefined and CONFIG_XEN_SELFBALLOONING is defined, xen_tmem_init would use undefined variable 'static bool frontswap'. Added #else to have #define frontswap (0) in the case where CONFIG_FRONTSWAP is not defined. Signed-off-by: Frederico Cadete Signed-off-by: Konrad Rzeszutek Wilk --- drivers/xen/tmem.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/xen/tmem.c b/drivers/xen/tmem.c index 18e8bd8fa947..cc072c66c766 100644 --- a/drivers/xen/tmem.c +++ b/drivers/xen/tmem.c @@ -41,6 +41,8 @@ module_param(selfballooning, bool, S_IRUGO); #ifdef CONFIG_FRONTSWAP static bool frontswap __read_mostly = true; module_param(frontswap, bool, S_IRUGO); +#else /* CONFIG_FRONTSWAP */ +#define frontswap (0) #endif /* CONFIG_FRONTSWAP */ #ifdef CONFIG_XEN_SELFBALLOONING -- cgit v1.2.3 From d3134e211e8db7fa833c40b5879fc022693e16c2 Mon Sep 17 00:00:00 2001 From: Vinod Koul Date: Tue, 28 May 2013 15:41:57 +0530 Subject: ASoC: wm8994: use the correct pointer to get the control value Signed-off-by: Vinod Koul Signed-off-by: Mark Brown --- sound/soc/codecs/wm8994.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/codecs/wm8994.c b/sound/soc/codecs/wm8994.c index 1eb152cb1097..62dc30598084 100644 --- a/sound/soc/codecs/wm8994.c +++ b/sound/soc/codecs/wm8994.c @@ -1031,7 +1031,7 @@ static int aif1clk_ev(struct snd_soc_dapm_widget *w, { struct snd_soc_codec *codec = w->codec; struct wm8994_priv *wm8994 = snd_soc_codec_get_drvdata(codec); - struct wm8994 *control = codec->control_data; + struct wm8994 *control = wm8994->wm8994; int mask = WM8994_AIF1DAC1L_ENA | WM8994_AIF1DAC1R_ENA; int i; int dac; -- cgit v1.2.3 From 9767a58b8b2a0b153c246fb6306c7d48d51bb379 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Tue, 28 May 2013 12:52:08 +0100 Subject: ASoC: wm8994: Fix reporting of accessory removal on WM8958 During recent refactoring the code to report removal when MICDET reports an absent microphone was removed, causing problems for systems which rely solely on the MICDET for this functionality. Restore it. Signed-off-by: Mark Brown --- sound/soc/codecs/wm8994.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/sound/soc/codecs/wm8994.c b/sound/soc/codecs/wm8994.c index 62dc30598084..b38382cc4b59 100644 --- a/sound/soc/codecs/wm8994.c +++ b/sound/soc/codecs/wm8994.c @@ -3833,6 +3833,11 @@ static irqreturn_t wm8958_mic_irq(int irq, void *data) dev_dbg(codec->dev, "Ignoring removed jack\n"); return IRQ_HANDLED; } + } else if (!(reg & WM8958_MICD_STS)) { + snd_soc_jack_report(wm8994->micdet[0].jack, 0, + SND_JACK_MECHANICAL | SND_JACK_HEADSET | + wm8994->btn_mask); + goto out; } if (wm8994->mic_detecting) -- cgit v1.2.3 From 7d6898be8db92450ce7a0afcc4238680b9703e2b Mon Sep 17 00:00:00 2001 From: Vinod Koul Date: Tue, 28 May 2013 15:06:42 +0530 Subject: ASoC: wm8994: check for array index returned The array 'drc_cfg' of size 3 may use index value -22 (EINVAL) The array 'retune_mobile_cfg' of size 3 may use index value -22 (EINVAL) Signed-off-by: Vinod Koul Signed-off-by: Mark Brown --- sound/soc/codecs/wm8994.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/sound/soc/codecs/wm8994.c b/sound/soc/codecs/wm8994.c index b38382cc4b59..dfd997aaadfc 100644 --- a/sound/soc/codecs/wm8994.c +++ b/sound/soc/codecs/wm8994.c @@ -383,6 +383,8 @@ static int wm8994_get_drc_enum(struct snd_kcontrol *kcontrol, struct wm8994_priv *wm8994 = snd_soc_codec_get_drvdata(codec); int drc = wm8994_get_drc(kcontrol->id.name); + if (drc < 0) + return drc; ucontrol->value.enumerated.item[0] = wm8994->drc_cfg[drc]; return 0; @@ -488,6 +490,9 @@ static int wm8994_get_retune_mobile_enum(struct snd_kcontrol *kcontrol, struct wm8994_priv *wm8994 = snd_soc_codec_get_drvdata(codec); int block = wm8994_get_retune_mobile_block(kcontrol->id.name); + if (block < 0) + return block; + ucontrol->value.enumerated.item[0] = wm8994->retune_mobile_cfg[block]; return 0; -- cgit v1.2.3 From 04d245b7899c020559402841d2f70ddd740a7704 Mon Sep 17 00:00:00 2001 From: Nicolas Schichan Date: Thu, 23 May 2013 16:53:02 +0200 Subject: ASoC: cs42l52: fix default value for MASTERA_VOL. The default register value for MASTERA_VOL is 0x00, the same as MASTERB_VOL. Signed-off-by: Nicolas Schichan Acked-by: Brian Austin Signed-off-by: Mark Brown Cc: stable@vger.kernel.org --- sound/soc/codecs/cs42l52.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/codecs/cs42l52.c b/sound/soc/codecs/cs42l52.c index 8465c1fa6bf9..030f53c96ec0 100644 --- a/sound/soc/codecs/cs42l52.c +++ b/sound/soc/codecs/cs42l52.c @@ -86,7 +86,7 @@ static const struct reg_default cs42l52_reg_defaults[] = { { CS42L52_BEEP_VOL, 0x00 }, /* r1D Beep Volume off Time */ { CS42L52_BEEP_TONE_CTL, 0x00 }, /* r1E Beep Tone Cfg. */ { CS42L52_TONE_CTL, 0x00 }, /* r1F Tone Ctl */ - { CS42L52_MASTERA_VOL, 0x88 }, /* r20 Master A Volume */ + { CS42L52_MASTERA_VOL, 0x00 }, /* r20 Master A Volume */ { CS42L52_MASTERB_VOL, 0x00 }, /* r21 Master B Volume */ { CS42L52_HPA_VOL, 0x00 }, /* r22 Headphone A Volume */ { CS42L52_HPB_VOL, 0x00 }, /* r23 Headphone B Volume */ -- cgit v1.2.3 From 6721cb60022629ae76365551f05d9658b8d14c55 Mon Sep 17 00:00:00 2001 From: "Steven Rostedt (Red Hat)" Date: Thu, 23 May 2013 14:21:36 -0400 Subject: ring-buffer: Do not poll non allocated cpu buffers The tracing infrastructure sets up for possible CPUs, but it uses the ring buffer polling, it is possible to call the ring buffer polling code with a CPU that hasn't been allocated. This will cause a kernel oops when it access a ring buffer cpu buffer that is part of the possible cpus but hasn't been allocated yet as the CPU has never been online. Reported-by: Mauro Carvalho Chehab Tested-by: Mauro Carvalho Chehab Signed-off-by: Steven Rostedt --- kernel/trace/ring_buffer.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/kernel/trace/ring_buffer.c b/kernel/trace/ring_buffer.c index b59aea2c48c2..e444ff88f0a4 100644 --- a/kernel/trace/ring_buffer.c +++ b/kernel/trace/ring_buffer.c @@ -620,6 +620,9 @@ int ring_buffer_poll_wait(struct ring_buffer *buffer, int cpu, if (cpu == RING_BUFFER_ALL_CPUS) work = &buffer->irq_work; else { + if (!cpumask_test_cpu(cpu, buffer->cpumask)) + return -EINVAL; + cpu_buffer = buffer->buffers[cpu]; work = &cpu_buffer->irq_work; } -- cgit v1.2.3 From b3657453f16a7b84eab9b93bb9a9a2901ffc70af Mon Sep 17 00:00:00 2001 From: Hante Meuleman Date: Mon, 27 May 2013 21:09:53 +0200 Subject: brcmfmac: Turn off ARP offloading when configured for AP. ARP offloading should only be used in STA or P2P client mode. It is currently configured once at init. When being configured for AP ARP offloading should be turned off and when AP mode is left it can be turned back on. Cc: stable@vger.kernel.org Reviewed-by: Arend Van Spriel Signed-off-by: Hante Meuleman Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville --- .../net/wireless/brcm80211/brcmfmac/dhd_common.c | 18 ---------- .../net/wireless/brcm80211/brcmfmac/fwil_types.h | 6 ++++ .../net/wireless/brcm80211/brcmfmac/wl_cfg80211.c | 40 +++++++++++++++++++++- 3 files changed, 45 insertions(+), 19 deletions(-) diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_common.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_common.c index be0787cab24f..9431af2465f3 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_common.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_common.c @@ -27,7 +27,6 @@ #include "tracepoint.h" #define PKTFILTER_BUF_SIZE 128 -#define BRCMF_ARPOL_MODE 0xb /* agent|snoop|peer_autoreply */ #define BRCMF_DEFAULT_BCN_TIMEOUT 3 #define BRCMF_DEFAULT_SCAN_CHANNEL_TIME 40 #define BRCMF_DEFAULT_SCAN_UNASSOC_TIME 40 @@ -338,23 +337,6 @@ int brcmf_c_preinit_dcmds(struct brcmf_if *ifp) goto done; } - /* Try to set and enable ARP offload feature, this may fail */ - err = brcmf_fil_iovar_int_set(ifp, "arp_ol", BRCMF_ARPOL_MODE); - if (err) { - brcmf_dbg(TRACE, "failed to set ARP offload mode to 0x%x, err = %d\n", - BRCMF_ARPOL_MODE, err); - err = 0; - } else { - err = brcmf_fil_iovar_int_set(ifp, "arpoe", 1); - if (err) { - brcmf_dbg(TRACE, "failed to enable ARP offload err = %d\n", - err); - err = 0; - } else - brcmf_dbg(TRACE, "successfully enabled ARP offload to 0x%x\n", - BRCMF_ARPOL_MODE); - } - /* Setup packet filter */ brcmf_c_pktfilter_offload_set(ifp, BRCMF_DEFAULT_PACKET_FILTER); brcmf_c_pktfilter_offload_enable(ifp, BRCMF_DEFAULT_PACKET_FILTER, diff --git a/drivers/net/wireless/brcm80211/brcmfmac/fwil_types.h b/drivers/net/wireless/brcm80211/brcmfmac/fwil_types.h index 0f2c83bc95dc..665ef69e974b 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/fwil_types.h +++ b/drivers/net/wireless/brcm80211/brcmfmac/fwil_types.h @@ -23,6 +23,12 @@ #define BRCMF_FIL_ACTION_FRAME_SIZE 1800 +/* ARP Offload feature flags for arp_ol iovar */ +#define BRCMF_ARP_OL_AGENT 0x00000001 +#define BRCMF_ARP_OL_SNOOP 0x00000002 +#define BRCMF_ARP_OL_HOST_AUTO_REPLY 0x00000004 +#define BRCMF_ARP_OL_PEER_AUTO_REPLY 0x00000008 + enum brcmf_fil_p2p_if_types { BRCMF_FIL_P2P_IF_CLIENT, diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c index 761f501959a9..94285f634a48 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c @@ -459,6 +459,38 @@ send_key_to_dongle(struct net_device *ndev, struct brcmf_wsec_key *key) return err; } +static s32 +brcmf_configure_arp_offload(struct brcmf_if *ifp, bool enable) +{ + s32 err; + u32 mode; + + if (enable) + mode = BRCMF_ARP_OL_AGENT | BRCMF_ARP_OL_PEER_AUTO_REPLY; + else + mode = 0; + + /* Try to set and enable ARP offload feature, this may fail, then it */ + /* is simply not supported and err 0 will be returned */ + err = brcmf_fil_iovar_int_set(ifp, "arp_ol", mode); + if (err) { + brcmf_dbg(TRACE, "failed to set ARP offload mode to 0x%x, err = %d\n", + mode, err); + err = 0; + } else { + err = brcmf_fil_iovar_int_set(ifp, "arpoe", enable); + if (err) { + brcmf_dbg(TRACE, "failed to configure (%d) ARP offload err = %d\n", + enable, err); + err = 0; + } else + brcmf_dbg(TRACE, "successfully configured (%d) ARP offload to 0x%x\n", + enable, mode); + } + + return err; +} + static struct wireless_dev *brcmf_cfg80211_add_iface(struct wiphy *wiphy, const char *name, enum nl80211_iftype type, @@ -3683,6 +3715,7 @@ brcmf_cfg80211_start_ap(struct wiphy *wiphy, struct net_device *ndev, } brcmf_set_mpc(ifp, 0); + brcmf_configure_arp_offload(ifp, false); /* find the RSN_IE */ rsn_ie = brcmf_parse_tlvs((u8 *)settings->beacon.tail, @@ -3789,8 +3822,10 @@ brcmf_cfg80211_start_ap(struct wiphy *wiphy, struct net_device *ndev, set_bit(BRCMF_VIF_STATUS_AP_CREATED, &ifp->vif->sme_state); exit: - if (err) + if (err) { brcmf_set_mpc(ifp, 1); + brcmf_configure_arp_offload(ifp, true); + } return err; } @@ -3831,6 +3866,7 @@ static int brcmf_cfg80211_stop_ap(struct wiphy *wiphy, struct net_device *ndev) brcmf_err("bss_enable config failed %d\n", err); } brcmf_set_mpc(ifp, 1); + brcmf_configure_arp_offload(ifp, true); set_bit(BRCMF_VIF_STATUS_AP_CREATING, &ifp->vif->sme_state); clear_bit(BRCMF_VIF_STATUS_AP_CREATED, &ifp->vif->sme_state); @@ -5229,6 +5265,8 @@ static s32 brcmf_config_dongle(struct brcmf_cfg80211_info *cfg) if (err) goto default_conf_out; + brcmf_configure_arp_offload(ifp, true); + cfg->dongle_up = true; default_conf_out: -- cgit v1.2.3 From 15a953d0919e3e7c94691ecabd0d9f74373f19aa Mon Sep 17 00:00:00 2001 From: Hante Meuleman Date: Mon, 27 May 2013 21:09:54 +0200 Subject: brcmfmac: Fix p2p setup when connected to ap on 5G. The firmware requires that on p2p setup when net interfaces are created or updated that they start initially with the same channel as the channel in use for the current connection (if any). If none exists take default channel 11. Reviewed-by: Arend Van Spriel Reviewed-by: Franky (Zhenhui) Lin Reviewed-by: Pieter-Paul Giesberts Signed-off-by: Hante Meuleman Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville --- drivers/net/wireless/brcm80211/brcmfmac/p2p.c | 28 ++++++++++++++++++++------- 1 file changed, 21 insertions(+), 7 deletions(-) diff --git a/drivers/net/wireless/brcm80211/brcmfmac/p2p.c b/drivers/net/wireless/brcm80211/brcmfmac/p2p.c index e7a1a4770996..17275ceb686c 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/p2p.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/p2p.c @@ -47,6 +47,7 @@ #define IS_P2P_SOCIAL_CHANNEL(channel) ((channel == SOCIAL_CHAN_1) || \ (channel == SOCIAL_CHAN_2) || \ (channel == SOCIAL_CHAN_3)) +#define BRCMF_P2P_TEMP_CHAN SOCIAL_CHAN_3 #define SOCIAL_CHAN_CNT 3 #define AF_PEER_SEARCH_CNT 2 @@ -2013,17 +2014,30 @@ static void brcmf_p2p_get_current_chanspec(struct brcmf_p2p_info *p2p, u16 *chanspec) { struct brcmf_if *ifp; - struct brcmf_fil_chan_info_le ci; + u8 mac_addr[ETH_ALEN]; struct brcmu_chan ch; - s32 err; + struct brcmf_bss_info_le *bi; + u8 *buf; ifp = p2p->bss_idx[P2PAPI_BSSCFG_PRIMARY].vif->ifp; - ch.chnum = 11; - - err = brcmf_fil_cmd_data_get(ifp, BRCMF_C_GET_CHANNEL, &ci, sizeof(ci)); - if (!err) - ch.chnum = le32_to_cpu(ci.hw_channel); + if (brcmf_fil_cmd_data_get(ifp, BRCMF_C_GET_BSSID, mac_addr, + ETH_ALEN) == 0) { + buf = kzalloc(WL_BSS_INFO_MAX, GFP_KERNEL); + if (buf != NULL) { + *(__le32 *)buf = cpu_to_le32(WL_BSS_INFO_MAX); + if (brcmf_fil_cmd_data_get(ifp, BRCMF_C_GET_BSS_INFO, + buf, WL_BSS_INFO_MAX) == 0) { + bi = (struct brcmf_bss_info_le *)(buf + 4); + *chanspec = le16_to_cpu(bi->chanspec); + kfree(buf); + return; + } + kfree(buf); + } + } + /* Use default channel for P2P */ + ch.chnum = BRCMF_P2P_TEMP_CHAN; ch.bw = BRCMU_CHAN_BW_20; p2p->cfg->d11inf.encchspec(&ch); *chanspec = ch.chspec; -- cgit v1.2.3 From 24e28beef939df8666a5d2784d6617cd9bb910a0 Mon Sep 17 00:00:00 2001 From: Arend van Spriel Date: Mon, 27 May 2013 21:09:55 +0200 Subject: brcmfmac: add additional parameter to brcmf_free_vif() Pass the struct brcmf_cfg80211_info instance instead of obtaining through vif itself using vif->wdev. This is needed as the netdev associated with this vif is already unregistered. Reviewed-by: Hante Meuleman Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville --- drivers/net/wireless/brcm80211/brcmfmac/p2p.c | 25 +++++++++++----------- .../net/wireless/brcm80211/brcmfmac/wl_cfg80211.c | 17 ++++++--------- .../net/wireless/brcm80211/brcmfmac/wl_cfg80211.h | 3 ++- 3 files changed, 20 insertions(+), 25 deletions(-) diff --git a/drivers/net/wireless/brcm80211/brcmfmac/p2p.c b/drivers/net/wireless/brcm80211/brcmfmac/p2p.c index 17275ceb686c..167b7afdf0d8 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/p2p.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/p2p.c @@ -1955,21 +1955,21 @@ s32 brcmf_p2p_attach(struct brcmf_cfg80211_info *cfg) err = brcmf_fil_iovar_int_set(pri_ifp, "p2p_disc", 1); if (err < 0) { brcmf_err("set p2p_disc error\n"); - brcmf_free_vif(p2p_vif); + brcmf_free_vif(cfg, p2p_vif); goto exit; } /* obtain bsscfg index for P2P discovery */ err = brcmf_fil_iovar_int_get(pri_ifp, "p2p_dev", &bssidx); if (err < 0) { brcmf_err("retrieving discover bsscfg index failed\n"); - brcmf_free_vif(p2p_vif); + brcmf_free_vif(cfg, p2p_vif); goto exit; } /* Verify that firmware uses same bssidx as driver !! */ if (p2p_ifp->bssidx != bssidx) { brcmf_err("Incorrect bssidx=%d, compared to p2p_ifp->bssidx=%d\n", bssidx, p2p_ifp->bssidx); - brcmf_free_vif(p2p_vif); + brcmf_free_vif(cfg, p2p_vif); goto exit; } @@ -1997,7 +1997,7 @@ void brcmf_p2p_detach(struct brcmf_p2p_info *p2p) brcmf_p2p_cancel_remain_on_channel(vif->ifp); brcmf_p2p_deinit_discovery(p2p); /* remove discovery interface */ - brcmf_free_vif(vif); + brcmf_free_vif(p2p->cfg, vif); p2p->bss_idx[P2PAPI_BSSCFG_DEVICE].vif = NULL; } /* just set it all to zero */ @@ -2222,7 +2222,7 @@ static struct wireless_dev *brcmf_p2p_create_p2pdev(struct brcmf_p2p_info *p2p, return &p2p_vif->wdev; fail: - brcmf_free_vif(p2p_vif); + brcmf_free_vif(p2p->cfg, p2p_vif); return ERR_PTR(err); } @@ -2231,13 +2231,12 @@ fail: * * @vif: virtual interface object to delete. */ -static void brcmf_p2p_delete_p2pdev(struct brcmf_cfg80211_vif *vif) +static void brcmf_p2p_delete_p2pdev(struct brcmf_cfg80211_info *cfg, + struct brcmf_cfg80211_vif *vif) { - struct brcmf_p2p_info *p2p = &vif->ifp->drvr->config->p2p; - cfg80211_unregister_wdev(&vif->wdev); - p2p->bss_idx[P2PAPI_BSSCFG_DEVICE].vif = NULL; - brcmf_free_vif(vif); + cfg->p2p.bss_idx[P2PAPI_BSSCFG_DEVICE].vif = NULL; + brcmf_free_vif(cfg, vif); } /** @@ -2328,7 +2327,7 @@ struct wireless_dev *brcmf_p2p_add_vif(struct wiphy *wiphy, const char *name, return &ifp->vif->wdev; fail: - brcmf_free_vif(vif); + brcmf_free_vif(cfg, vif); return ERR_PTR(err); } @@ -2364,7 +2363,7 @@ int brcmf_p2p_del_vif(struct wiphy *wiphy, struct wireless_dev *wdev) break; case NL80211_IFTYPE_P2P_DEVICE: - brcmf_p2p_delete_p2pdev(vif); + brcmf_p2p_delete_p2pdev(cfg, vif); return 0; default: return -ENOTSUPP; @@ -2392,7 +2391,7 @@ int brcmf_p2p_del_vif(struct wiphy *wiphy, struct wireless_dev *wdev) err = 0; } brcmf_cfg80211_arm_vif_event(cfg, NULL); - brcmf_free_vif(vif); + brcmf_free_vif(cfg, vif); p2p->bss_idx[P2PAPI_BSSCFG_CONNECTION].vif = NULL; return err; diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c index 94285f634a48..f8c86b58a6d1 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c @@ -4292,20 +4292,16 @@ struct brcmf_cfg80211_vif *brcmf_alloc_vif(struct brcmf_cfg80211_info *cfg, return vif; } -void brcmf_free_vif(struct brcmf_cfg80211_vif *vif) +void brcmf_free_vif(struct brcmf_cfg80211_info *cfg, + struct brcmf_cfg80211_vif *vif) { - struct brcmf_cfg80211_info *cfg; - struct wiphy *wiphy; - - wiphy = vif->wdev.wiphy; - cfg = wiphy_priv(wiphy); list_del(&vif->list); cfg->vif_cnt--; kfree(vif); if (!cfg->vif_cnt) { - wiphy_unregister(wiphy); - wiphy_free(wiphy); + wiphy_unregister(cfg->wiphy); + wiphy_free(cfg->wiphy); } } @@ -4888,8 +4884,7 @@ cfg80211_p2p_attach_out: wl_deinit_priv(cfg); cfg80211_attach_out: - brcmf_free_vif(vif); - wiphy_free(wiphy); + brcmf_free_vif(cfg, vif); return NULL; } @@ -4901,7 +4896,7 @@ void brcmf_cfg80211_detach(struct brcmf_cfg80211_info *cfg) wl_deinit_priv(cfg); brcmf_btcoex_detach(cfg); list_for_each_entry_safe(vif, tmp, &cfg->vif_list, list) { - brcmf_free_vif(vif); + brcmf_free_vif(cfg, vif); } } diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.h b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.h index a71cff84cdcf..d9bdaf9a72d0 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.h +++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.h @@ -487,7 +487,8 @@ enum nl80211_iftype brcmf_cfg80211_get_iftype(struct brcmf_if *ifp); struct brcmf_cfg80211_vif *brcmf_alloc_vif(struct brcmf_cfg80211_info *cfg, enum nl80211_iftype type, bool pm_block); -void brcmf_free_vif(struct brcmf_cfg80211_vif *vif); +void brcmf_free_vif(struct brcmf_cfg80211_info *cfg, + struct brcmf_cfg80211_vif *vif); s32 brcmf_vif_set_mgmt_ie(struct brcmf_cfg80211_vif *vif, s32 pktflag, const u8 *vndr_ie_buf, u32 vndr_ie_len); -- cgit v1.2.3 From 9390ace916b2fd866c1762b1cd16c276d8c8c890 Mon Sep 17 00:00:00 2001 From: Arend van Spriel Date: Mon, 27 May 2013 21:09:56 +0200 Subject: brcmfmac: free net device when registration fails When registration fails the net device is no longer needed. Free the net device and remove reference to private data from the driver. Reviewed-by: Hante Meuleman Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville --- drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c | 10 +++++++--- drivers/net/wireless/brcm80211/brcmfmac/fweh.c | 3 ++- 2 files changed, 9 insertions(+), 4 deletions(-) diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c index 59c25463e428..f04e3555dca3 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c @@ -656,7 +656,9 @@ int brcmf_net_attach(struct brcmf_if *ifp, bool rtnl_locked) return 0; fail: + drvr->iflist[ifp->bssidx] = NULL; ndev->netdev_ops = NULL; + free_netdev(ndev); return -EBADE; } @@ -720,6 +722,9 @@ static int brcmf_net_p2p_attach(struct brcmf_if *ifp) return 0; fail: + ifp->drvr->iflist[ifp->bssidx] = NULL; + ndev->netdev_ops = NULL; + free_netdev(ndev); return -EBADE; } @@ -925,8 +930,6 @@ fail: brcmf_fws_del_interface(ifp); brcmf_fws_deinit(drvr); } - free_netdev(ifp->ndev); - drvr->iflist[0] = NULL; if (p2p_ifp) { free_netdev(p2p_ifp->ndev); drvr->iflist[1] = NULL; @@ -934,7 +937,8 @@ fail: return ret; } if ((brcmf_p2p_enable) && (p2p_ifp)) - brcmf_net_p2p_attach(p2p_ifp); + if (brcmf_net_p2p_attach(p2p_ifp) < 0) + brcmf_p2p_enable = 0; return 0; } diff --git a/drivers/net/wireless/brcm80211/brcmfmac/fweh.c b/drivers/net/wireless/brcm80211/brcmfmac/fweh.c index 5a64280e6485..83ee53a7c76e 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/fweh.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/fweh.c @@ -202,7 +202,8 @@ static void brcmf_fweh_handle_if_event(struct brcmf_pub *drvr, return; brcmf_fws_add_interface(ifp); if (!drvr->fweh.evt_handler[BRCMF_E_IF]) - err = brcmf_net_attach(ifp, false); + if (brcmf_net_attach(ifp, false) < 0) + return; } if (ifevent->action == BRCMF_E_IF_CHANGE) -- cgit v1.2.3 From cbb371da233eb2b4c200010a5372579b880b4ae6 Mon Sep 17 00:00:00 2001 From: Arend van Spriel Date: Mon, 27 May 2013 21:09:57 +0200 Subject: brcmfmac: use struct net_device::destructor to remove interfaces Upon deleting a P2P_CLIENT/GO interface the vif and consequently the wdev is freed before the net_device is actually being unregistered but cfg80211 still needs to access the wdev. Using destructor field to free the net_device and vif. Reviewed-by: Hante Meuleman Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville --- .../net/wireless/brcm80211/brcmfmac/dhd_linux.c | 6 +++--- drivers/net/wireless/brcm80211/brcmfmac/p2p.c | 23 +++++++++++++++++++++- .../net/wireless/brcm80211/brcmfmac/wl_cfg80211.c | 1 - 3 files changed, 25 insertions(+), 5 deletions(-) diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c index f04e3555dca3..b98f2235978e 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c @@ -653,6 +653,7 @@ int brcmf_net_attach(struct brcmf_if *ifp, bool rtnl_locked) brcmf_dbg(INFO, "%s: Broadcom Dongle Host Driver\n", ndev->name); + ndev->destructor = free_netdev; return 0; fail: @@ -793,6 +794,7 @@ void brcmf_del_if(struct brcmf_pub *drvr, s32 bssidx) struct brcmf_if *ifp; ifp = drvr->iflist[bssidx]; + drvr->iflist[bssidx] = NULL; if (!ifp) { brcmf_err("Null interface, idx=%d\n", bssidx); return; @@ -813,15 +815,13 @@ void brcmf_del_if(struct brcmf_pub *drvr, s32 bssidx) cancel_work_sync(&ifp->setmacaddr_work); cancel_work_sync(&ifp->multicast_work); } - + /* unregister will take care of freeing it */ unregister_netdev(ifp->ndev); if (bssidx == 0) brcmf_cfg80211_detach(drvr->config); - free_netdev(ifp->ndev); } else { kfree(ifp); } - drvr->iflist[bssidx] = NULL; } int brcmf_attach(uint bus_hdrlen, struct device *dev) diff --git a/drivers/net/wireless/brcm80211/brcmfmac/p2p.c b/drivers/net/wireless/brcm80211/brcmfmac/p2p.c index 167b7afdf0d8..79555f006d53 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/p2p.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/p2p.c @@ -2239,6 +2239,25 @@ static void brcmf_p2p_delete_p2pdev(struct brcmf_cfg80211_info *cfg, brcmf_free_vif(cfg, vif); } +/** + * brcmf_p2p_free_p2p_if() - free up net device related data. + * + * @ndev: net device that needs to be freed. + */ +static void brcmf_p2p_free_p2p_if(struct net_device *ndev) +{ + struct brcmf_cfg80211_info *cfg; + struct brcmf_cfg80211_vif *vif; + struct brcmf_if *ifp; + + ifp = netdev_priv(ndev); + cfg = ifp->drvr->config; + vif = ifp->vif; + + brcmf_free_vif(cfg, vif); + free_netdev(ifp->ndev); +} + /** * brcmf_p2p_add_vif() - create a new P2P virtual interface. * @@ -2316,6 +2335,9 @@ struct wireless_dev *brcmf_p2p_add_vif(struct wiphy *wiphy, const char *name, brcmf_err("Registering netdevice failed\n"); goto fail; } + /* override destructor */ + ifp->ndev->destructor = brcmf_p2p_free_p2p_if; + cfg->p2p.bss_idx[P2PAPI_BSSCFG_CONNECTION].vif = vif; /* Disable firmware roaming for P2P interface */ brcmf_fil_iovar_int_set(ifp, "roam_off", 1); @@ -2391,7 +2413,6 @@ int brcmf_p2p_del_vif(struct wiphy *wiphy, struct wireless_dev *wdev) err = 0; } brcmf_cfg80211_arm_vif_event(cfg, NULL); - brcmf_free_vif(cfg, vif); p2p->bss_idx[P2PAPI_BSSCFG_CONNECTION].vif = NULL; return err; diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c index f8c86b58a6d1..656ce8765863 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c @@ -4678,7 +4678,6 @@ static s32 brcmf_notify_vif_event(struct brcmf_if *ifp, return 0; case BRCMF_E_IF_DEL: - ifp->vif = NULL; mutex_unlock(&event->vif_event_lock); /* event may not be upon user request */ if (brcmf_cfg80211_vif_event_armed(cfg)) -- cgit v1.2.3 From 1c9d30cfac9901c4f7447deacdfb6b77eee1a096 Mon Sep 17 00:00:00 2001 From: Hante Meuleman Date: Mon, 27 May 2013 21:09:58 +0200 Subject: brcmfmac: Add multi channel support for P2P. Multi channel support was disabled. This patch will enable it and configure the P2P GO on the correct frequency when multi channel is used. Reviewed-by: Arend Van Spriel Signed-off-by: Hante Meuleman Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville --- .../net/wireless/brcm80211/brcmfmac/wl_cfg80211.c | 26 +++++++++++++++++++++- 1 file changed, 25 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c index 656ce8765863..6a8717820b9f 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c @@ -3671,11 +3671,29 @@ brcmf_config_ap_mgmt_ie(struct brcmf_cfg80211_vif *vif, return err; } +static s32 +brcmf_cfg80211_set_channel(struct brcmf_cfg80211_info *cfg, + struct brcmf_if *ifp, + struct ieee80211_channel *channel) +{ + u16 chanspec; + s32 err; + + brcmf_dbg(TRACE, "band=%d, center_freq=%d\n", channel->band, + channel->center_freq); + + chanspec = channel_to_chanspec(&cfg->d11inf, channel); + err = brcmf_fil_iovar_int_set(ifp, "chanspec", chanspec); + + return err; +} + static s32 brcmf_cfg80211_start_ap(struct wiphy *wiphy, struct net_device *ndev, struct cfg80211_ap_settings *settings) { s32 ie_offset; + struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy); struct brcmf_if *ifp = netdev_priv(ndev); struct brcmf_tlv *ssid_ie; struct brcmf_ssid_le ssid_le; @@ -3746,6 +3764,12 @@ brcmf_cfg80211_start_ap(struct wiphy *wiphy, struct net_device *ndev, brcmf_config_ap_mgmt_ie(ifp->vif, &settings->beacon); + err = brcmf_cfg80211_set_channel(cfg, ifp, settings->chandef.chan); + if (err < 0) { + brcmf_err("Set Channel failed, %d\n", err); + goto exit; + } + if (settings->beacon_interval) { err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_BCNPRD, settings->beacon_interval); @@ -4184,7 +4208,7 @@ static const struct ieee80211_iface_limit brcmf_iface_limits[] = { static const struct ieee80211_iface_combination brcmf_iface_combos[] = { { .max_interfaces = BRCMF_IFACE_MAX_CNT, - .num_different_channels = 1, /* no multi-channel for now */ + .num_different_channels = 2, .n_limits = ARRAY_SIZE(brcmf_iface_limits), .limits = brcmf_iface_limits } -- cgit v1.2.3 From 102fd0d69eed4c778555fe957f8660dfee1568ea Mon Sep 17 00:00:00 2001 From: Hante Meuleman Date: Mon, 27 May 2013 21:09:59 +0200 Subject: brcmfmac: Disable powersave mode for P2P link. For p2p client mode powersave mode should be kept disabled. It is working but inefficient. In general p2p links do no benefit from this mode, because these links are setup temporarily to transfer data. Reviewed-by: Arend Van Spriel Signed-off-by: Hante Meuleman Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville --- drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c index 6a8717820b9f..301e572e8923 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c @@ -2248,6 +2248,11 @@ brcmf_cfg80211_set_power_mgmt(struct wiphy *wiphy, struct net_device *ndev, } pm = enabled ? PM_FAST : PM_OFF; + /* Do not enable the power save after assoc if it is a p2p interface */ + if (ifp->vif->wdev.iftype == NL80211_IFTYPE_P2P_CLIENT) { + brcmf_dbg(INFO, "Do not enable power save for P2P clients\n"); + pm = PM_OFF; + } brcmf_dbg(INFO, "power save %s\n", (pm ? "enabled" : "disabled")); err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_PM, pm); -- cgit v1.2.3 From add295a4afbdf5852d004c754c552d692b0fcac8 Mon Sep 17 00:00:00 2001 From: Gabor Juhos Date: Tue, 28 May 2013 14:52:19 +0200 Subject: ath9k: use correct OTP register offsets for AR9550 Accessing the OTP memory on AR9950 causes a data bus like this: Data bus error, epc == 801f7774, ra == 801f7774 Oops[#1]: CPU: 0 PID: 1 Comm: swapper Not tainted 3.10.0-rc3 #592 task: 87c28000 ti: 87c22000 task.ti: 87c22000 $ 0 : 00000000 00000061 deadc0de 00000000 $ 4 : b8115f18 00015f18 00000007 00000004 $ 8 : 00000001 7c7c3c7c 7c7c7c7c 7c7c7c7c $12 : 7c7c3c7c 80320a68 00000000 7c7c7c3c $16 : 87cd8010 00015f18 00000007 00000000 $20 : 00000064 00000004 87c23c7c 8035210c $24 : 00000000 801f3674 $28 : 87c22000 87c23b48 00000001 801f7774 Hi : 00000000 Lo : 00000064 epc : 801f7774 ath9k_hw_wait+0x58/0xb0 Not tainted ra : 801f7774 ath9k_hw_wait+0x58/0xb0 Status: 1000cc03 KERNEL EXL IE Cause : 4080801c PrId : 00019750 (MIPS 74Kc) Modules linked in: Process swapper (pid: 1, threadinfo=87c22000, task=87c28000, ts=00000000) Stack : 0000000f 00000061 00002710 8006240c 00000001 87cd8010 87c23bb0 87cd8010 00000000 00000004 00000003 80210c7c 000000b3 67fa8000 0000032a 000006fe 000003e8 00000002 00000028 87c23bf0 000003ff 80210d24 803e5630 80210e28 00000000 00000007 87cd8010 00007044 00000004 00000061 000003ff 000001ff 87c26000 87cd8010 00000220 87cd8bb8 80210000 8020fcf4 87c22000 87c23c08 ... Call Trace: [<801f7774>] ath9k_hw_wait+0x58/0xb0 [<80210c7c>] ar9300_otp_read_word+0x80/0xd4 [<80210d24>] ar9300_read_otp+0x54/0xb0 [<8020fcf4>] ar9300_check_eeprom_header+0x1c/0x40 [<80210fe4>] ath9k_hw_ar9300_fill_eeprom+0x118/0x39c [<80206650>] ath9k_hw_eeprom_init+0x74/0xb4 [<801f96d0>] ath9k_hw_init+0x7ec/0x96c [<801e65ec>] ath9k_init_device+0x340/0x758 [<801f35d0>] ath_ahb_probe+0x21c/0x2c0 [<801c041c>] driver_probe_device+0xc0/0x1e4 [<801c05ac>] __driver_attach+0x6c/0xa4 [<801bea08>] bus_for_each_dev+0x64/0xa8 [<801bfa40>] bus_add_driver+0xcc/0x24c [<801c0954>] driver_register+0xbc/0x17c [<803f8fc0>] ath9k_init+0x5c/0x88 [<800608fc>] do_one_initcall+0xec/0x1a0 [<803e6a68>] kernel_init_freeable+0x13c/0x200 [<80309cdc>] kernel_init+0x1c/0xe4 [<80062450>] ret_from_kernel_thread+0x10/0x18 On the AR9550, the OTP registers are located at the same address as on the AR9340. Use the correct values to avoid the error. Cc: stable@vger.kernel.org # 3.6+ Signed-off-by: Gabor Juhos Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/ar9003_eeprom.h | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.h b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.h index 54ba42f4108a..874f6570bd1c 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.h +++ b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.h @@ -68,13 +68,16 @@ #define AR9300_BASE_ADDR 0x3ff #define AR9300_BASE_ADDR_512 0x1ff -#define AR9300_OTP_BASE (AR_SREV_9340(ah) ? 0x30000 : 0x14000) -#define AR9300_OTP_STATUS (AR_SREV_9340(ah) ? 0x30018 : 0x15f18) +#define AR9300_OTP_BASE \ + ((AR_SREV_9340(ah) || AR_SREV_9550(ah)) ? 0x30000 : 0x14000) +#define AR9300_OTP_STATUS \ + ((AR_SREV_9340(ah) || AR_SREV_9550(ah)) ? 0x30018 : 0x15f18) #define AR9300_OTP_STATUS_TYPE 0x7 #define AR9300_OTP_STATUS_VALID 0x4 #define AR9300_OTP_STATUS_ACCESS_BUSY 0x2 #define AR9300_OTP_STATUS_SM_BUSY 0x1 -#define AR9300_OTP_READ_DATA (AR_SREV_9340(ah) ? 0x3001c : 0x15f1c) +#define AR9300_OTP_READ_DATA \ + ((AR_SREV_9340(ah) || AR_SREV_9550(ah)) ? 0x3001c : 0x15f1c) enum targetPowerHTRates { HT_TARGET_RATE_0_8_16, -- cgit v1.2.3 From b161c144404c18f6a9e20e46b63828ae3c2eb093 Mon Sep 17 00:00:00 2001 From: "J. Bruce Fields" Date: Fri, 24 May 2013 09:47:49 -0400 Subject: svcrpc: implement O_NONBLOCK behavior for use-gss-proxy Somebody noticed LTP was complaining about O_NONBLOCK opens of /proc/net/rpc/use-gss-proxy succeeding and then a following read hanging. I'm not convinced LTP really has any business opening random proc files and expecting them to behave a certain way. Maybe this isn't really a bug. But in any case the O_NONBLOCK behavior could be useful for someone that wants to test whether gss-proxy is up without waiting. Reported-by: Jan Stancek Signed-off-by: J. Bruce Fields --- net/sunrpc/auth_gss/svcauth_gss.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/net/sunrpc/auth_gss/svcauth_gss.c b/net/sunrpc/auth_gss/svcauth_gss.c index 2c6a1ece54bf..29b4ba93ab3c 100644 --- a/net/sunrpc/auth_gss/svcauth_gss.c +++ b/net/sunrpc/auth_gss/svcauth_gss.c @@ -1317,10 +1317,12 @@ static inline bool gssp_ready(struct sunrpc_net *sn) return false; } -static int wait_for_gss_proxy(struct net *net) +static int wait_for_gss_proxy(struct net *net, struct file *file) { struct sunrpc_net *sn = net_generic(net, sunrpc_net_id); + if (file->f_flags & O_NONBLOCK && !gssp_ready(sn)) + return -EAGAIN; return wait_event_interruptible(sn->gssp_wq, gssp_ready(sn)); } @@ -1362,7 +1364,7 @@ static ssize_t read_gssp(struct file *file, char __user *buf, size_t len; int ret; - ret = wait_for_gss_proxy(net); + ret = wait_for_gss_proxy(net, file); if (ret) return ret; -- cgit v1.2.3 From e9d0626ed43a41a3fc526d1df06122b0d4eac174 Mon Sep 17 00:00:00 2001 From: Zhang Yanfei Date: Tue, 14 May 2013 14:48:58 +0800 Subject: x86-64, init: Fix a possible wraparound bug in switchover in head_64.S In head_64.S, a switchover has been used to handle kernel crossing 1G, 512G boundaries. And commit 8170e6bed465b4b0c7687f93e9948aca4358a33b x86, 64bit: Use a #PF handler to materialize early mappings on demand said: During the switchover in head_64.S, before #PF handler is available, we use three pages to handle kernel crossing 1G, 512G boundaries with sharing page by playing games with page aliasing: the same page is mapped twice in the higher-level tables with appropriate wraparound. But from the switchover code, when we set up the PUD table: 114 addq $4096, %rdx 115 movq %rdi, %rax 116 shrq $PUD_SHIFT, %rax 117 andl $(PTRS_PER_PUD-1), %eax 118 movq %rdx, (4096+0)(%rbx,%rax,8) 119 movq %rdx, (4096+8)(%rbx,%rax,8) It seems line 119 has a potential bug there. For example, if the kernel is loaded at physical address 511G+1008M, that is 000000000 111111111 111111000 000000000000000000000 and the kernel _end is 512G+2M, that is 000000001 000000000 000000001 000000000000000000000 So in this example, when using the 2nd page to setup PUD (line 114~119), rax is 511. In line 118, we put rdx which is the address of the PMD page (the 3rd page) into entry 511 of the PUD table. But in line 119, the entry we calculate from (4096+8)(%rbx,%rax,8) has exceeded the PUD page. IMO, the entry in line 119 should be wraparound into entry 0 of the PUD table. The patch fixes the bug. Signed-off-by: Zhang Yanfei Link: http://lkml.kernel.org/r/5191DE5A.3020302@cn.fujitsu.com Signed-off-by: Yinghai Lu Cc: v3.9 Signed-off-by: H. Peter Anvin --- arch/x86/kernel/head_64.S | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/arch/x86/kernel/head_64.S b/arch/x86/kernel/head_64.S index 08f7e8039099..321d65ebaffe 100644 --- a/arch/x86/kernel/head_64.S +++ b/arch/x86/kernel/head_64.S @@ -115,8 +115,10 @@ startup_64: movq %rdi, %rax shrq $PUD_SHIFT, %rax andl $(PTRS_PER_PUD-1), %eax - movq %rdx, (4096+0)(%rbx,%rax,8) - movq %rdx, (4096+8)(%rbx,%rax,8) + movq %rdx, 4096(%rbx,%rax,8) + incl %eax + andl $(PTRS_PER_PUD-1), %eax + movq %rdx, 4096(%rbx,%rax,8) addq $8192, %rbx movq %rdi, %rax -- cgit v1.2.3 From 2a0ff3fbe39bc93f719ff857e5a359d9780579ff Mon Sep 17 00:00:00 2001 From: Jeff Liu Date: Sun, 26 May 2013 21:33:09 +0800 Subject: cgroup: warn about mismatching options of a new mount of an existing hierarchy With the new __DEVEL__sane_behavior mount option was introduced, if the root cgroup is alive with no xattr function, to mount a new cgroup with xattr will be rejected in terms of design which just fine. However, if the root cgroup does not mounted with __DEVEL__sane_hehavior, to create a new cgroup with xattr option will succeed although after that the EA function does not works as expected but will get ENOTSUPP for setting up attributes under either cgroup. e.g. setfattr: /cgroup2/test: Operation not supported Instead of keeping silence in this case, it's better to drop a log entry in warning level. That would be helpful to understand the reason behind the scene from the user's perspective, and this is essentially an improvement does not break the backward compatibilities. With this fix, above mount attemption will keep up works as usual but the following line cound be found at the system log: [ ...] cgroup: new mount options do not match the existing superblock tj: minor formatting / message updates. Signed-off-by: Jie Liu Reported-by: Alexey Kodanev Signed-off-by: Tejun Heo Cc: stable@vger.kernel.org --- kernel/cgroup.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) diff --git a/kernel/cgroup.c b/kernel/cgroup.c index 31e9ef319070..a7c9e6ddb979 100644 --- a/kernel/cgroup.c +++ b/kernel/cgroup.c @@ -1686,11 +1686,14 @@ static struct dentry *cgroup_mount(struct file_system_type *fs_type, */ cgroup_drop_root(opts.new_root); - if (((root->flags | opts.flags) & CGRP_ROOT_SANE_BEHAVIOR) && - root->flags != opts.flags) { - pr_err("cgroup: sane_behavior: new mount options should match the existing superblock\n"); - ret = -EINVAL; - goto drop_new_super; + if (root->flags != opts.flags) { + if ((root->flags | opts.flags) & CGRP_ROOT_SANE_BEHAVIOR) { + pr_err("cgroup: sane_behavior: new mount options should match the existing superblock\n"); + ret = -EINVAL; + goto drop_new_super; + } else { + pr_warning("cgroup: new mount options do not match the existing superblock, will be ignored\n"); + } } /* no subsys rebinding, so refcounts don't change */ -- cgit v1.2.3 From da9d0fbf5e9aa47492a19588bd0efd18d6d172e0 Mon Sep 17 00:00:00 2001 From: Olof Johansson Date: Thu, 9 May 2013 13:58:19 -0700 Subject: ARM: exynos: defconfig update This turns on a number of configs that are useful on the Chromebook, but also good to have on in general: * USB host and MMC drivers(!) * I2C GPIO arbitration driver * CYAPA trackpad driver * simplefb * CROS EC and keyboard drivers * S5M8767 driver * MAX77686 drivers * MAX8997 driver * DEVTMPFS + mount * DM_CRYPT (as module) * CRYPTOLOOP * HIGHMEM * PRINTK timestamps This also turns off DEBUG_LL, and switches the hardcoded Samsung lowlevel uart to uart 3 (which is only used to show the "uncompressing kernel" message at boot, it seems). Signed-off-by: Olof Johansson Reviewed-by: Doug Anderson Tested-by: Tushar Behera Acked-by: Kukjin Kim --- arch/arm/configs/exynos_defconfig | 54 +++++++++++++++++++++++++++++++++------ 1 file changed, 46 insertions(+), 8 deletions(-) diff --git a/arch/arm/configs/exynos_defconfig b/arch/arm/configs/exynos_defconfig index e40b435d204e..227abf9cc601 100644 --- a/arch/arm/configs/exynos_defconfig +++ b/arch/arm/configs/exynos_defconfig @@ -1,4 +1,4 @@ -CONFIG_EXPERIMENTAL=y +CONFIG_SYSVIPC=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_BLK_DEV_INITRD=y @@ -7,17 +7,18 @@ CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set CONFIG_PARTITION_ADVANCED=y -CONFIG_EFI_PARTITION=y CONFIG_ARCH_EXYNOS=y -CONFIG_S3C_LOWLEVEL_UART_PORT=1 +CONFIG_S3C_LOWLEVEL_UART_PORT=3 CONFIG_S3C24XX_PWM=y CONFIG_ARCH_EXYNOS5=y CONFIG_MACH_EXYNOS4_DT=y -CONFIG_MACH_EXYNOS5_DT=y CONFIG_SMP=y CONFIG_NR_CPUS=2 CONFIG_PREEMPT=y CONFIG_AEABI=y +CONFIG_HIGHMEM=y +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_ARM_APPENDED_DTB=y CONFIG_ARM_ATAG_DTB_COMPAT=y CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC1,115200 init=/linuxrc mem=256M" @@ -30,35 +31,58 @@ CONFIG_NET_KEY=y CONFIG_INET=y CONFIG_RFKILL_REGULATOR=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y CONFIG_PROC_DEVICETREE=y CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_CRYPTOLOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=8192 CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y CONFIG_CHR_DEV_SG=y +CONFIG_MD=y +CONFIG_BLK_DEV_DM=y +CONFIG_DM_CRYPT=m CONFIG_NETDEVICES=y CONFIG_SMSC911X=y CONFIG_USB_USBNET=y CONFIG_USB_NET_SMSC75XX=y CONFIG_USB_NET_SMSC95XX=y CONFIG_INPUT_EVDEV=y -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set +CONFIG_KEYBOARD_CROS_EC=y +# CONFIG_MOUSE_PS2 is not set +CONFIG_MOUSE_CYAPA=y CONFIG_INPUT_TOUCHSCREEN=y CONFIG_SERIAL_8250=y CONFIG_SERIAL_SAMSUNG=y CONFIG_SERIAL_SAMSUNG_CONSOLE=y CONFIG_SERIAL_OF_PLATFORM=y CONFIG_HW_RANDOM=y +CONFIG_TCG_TPM=y +CONFIG_TCG_TIS_I2C_INFINEON=y CONFIG_I2C=y +CONFIG_I2C_MUX=y +CONFIG_I2C_ARB_GPIO_CHALLENGE=y +CONFIG_I2C_S3C2410=y +CONFIG_DEBUG_GPIO=y # CONFIG_HWMON is not set +CONFIG_MFD_CROS_EC=y +CONFIG_MFD_CROS_EC_I2C=y +CONFIG_MFD_MAX77686=y +CONFIG_MFD_MAX8997=y +CONFIG_MFD_SEC_CORE=y CONFIG_MFD_TPS65090=y CONFIG_REGULATOR=y CONFIG_REGULATOR_FIXED_VOLTAGE=y CONFIG_REGULATOR_GPIO=y +CONFIG_REGULATOR_MAX8997=y +CONFIG_REGULATOR_MAX77686=y +CONFIG_REGULATOR_S5M8767=y CONFIG_REGULATOR_TPS65090=y CONFIG_FB=y +CONFIG_FB_MODE_HELPERS=y +CONFIG_FB_SIMPLE=y CONFIG_EXYNOS_VIDEO=y CONFIG_EXYNOS_MIPI_DSI=y CONFIG_EXYNOS_DP=y @@ -67,6 +91,20 @@ CONFIG_FONTS=y CONFIG_FONT_7x14=y CONFIG_LOGO=y CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_S5P=y +CONFIG_USB_STORAGE=y +CONFIG_USB_DWC3=y +CONFIG_USB_PHY=y +CONFIG_SAMSUNG_USB2PHY=y +CONFIG_SAMSUNG_USB3PHY=y +CONFIG_MMC=y +CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_S3C=y +CONFIG_MMC_DW=y +CONFIG_MMC_DW_IDMAC=y +CONFIG_MMC_DW_EXYNOS=y +CONFIG_COMMON_CLK_MAX77686=y CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y CONFIG_EXT4_FS=y @@ -79,6 +117,7 @@ CONFIG_ROMFS_FS=y CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_ASCII=y CONFIG_NLS_ISO8859_1=y +CONFIG_PRINTK_TIME=y CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_HUNG_TASK=y @@ -87,6 +126,5 @@ CONFIG_DEBUG_SPINLOCK=y CONFIG_DEBUG_MUTEXES=y CONFIG_DEBUG_INFO=y CONFIG_DEBUG_USER=y -CONFIG_DEBUG_LL=y -CONFIG_EARLY_PRINTK=y +CONFIG_CRYPTO_SHA256=y CONFIG_CRC_CCITT=y -- cgit v1.2.3 From fcce9a35f8faaa1f52236c554ef1b15d99a7537e Mon Sep 17 00:00:00 2001 From: George Spelvin Date: Wed, 29 May 2013 10:20:35 +0900 Subject: ahci: add an observed PCI ID for Marvell 88se9172 SATA controller A third possible PCI ID, as personally observed, and found in the pci.ids list. Signed-off-by: George Spelvin Signed-off-by: Tejun Heo --- drivers/ata/ahci.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index 21808766140a..2b50dfdf1cfc 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -423,6 +423,8 @@ static const struct pci_device_id ahci_pci_tbl[] = { .driver_data = board_ahci_yes_fbs }, /* 88se9125 */ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL_EXT, 0x917a), .driver_data = board_ahci_yes_fbs }, /* 88se9172 */ + { PCI_DEVICE(PCI_VENDOR_ID_MARVELL_EXT, 0x9172), + .driver_data = board_ahci_yes_fbs }, /* 88se9172 */ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL_EXT, 0x9192), .driver_data = board_ahci_yes_fbs }, /* 88se9172 on some Gigabyte */ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL_EXT, 0x91a3), -- cgit v1.2.3 From 1be374a0518a288147c6a7398792583200a67261 Mon Sep 17 00:00:00 2001 From: Andy Lutomirski Date: Wed, 22 May 2013 14:07:44 -0700 Subject: net: Block MSG_CMSG_COMPAT in send(m)msg and recv(m)msg To: linux-kernel@vger.kernel.org Cc: x86@kernel.org, trinity@vger.kernel.org, Andy Lutomirski , netdev@vger.kernel.org, "David S. Miller" Subject: [PATCH 5/5] net: Block MSG_CMSG_COMPAT in send(m)msg and recv(m)msg MSG_CMSG_COMPAT is (AFAIK) not intended to be part of the API -- it's a hack that steals a bit to indicate to other networking code that a compat entry was used. So don't allow it from a non-compat syscall. This prevents an oops when running this code: int main() { int s; struct sockaddr_in addr; struct msghdr *hdr; char *highpage = mmap((void*)(TASK_SIZE_MAX - 4096), 4096, PROT_READ | PROT_WRITE, MAP_PRIVATE | MAP_ANONYMOUS | MAP_FIXED, -1, 0); if (highpage == MAP_FAILED) err(1, "mmap"); s = socket(AF_INET, SOCK_DGRAM, IPPROTO_UDP); if (s == -1) err(1, "socket"); addr.sin_family = AF_INET; addr.sin_port = htons(1); addr.sin_addr.s_addr = htonl(INADDR_LOOPBACK); if (connect(s, (struct sockaddr*)&addr, sizeof(addr)) != 0) err(1, "connect"); void *evil = highpage + 4096 - COMPAT_MSGHDR_SIZE; printf("Evil address is %p\n", evil); if (syscall(__NR_sendmmsg, s, evil, 1, MSG_CMSG_COMPAT) < 0) err(1, "sendmmsg"); return 0; } Cc: David S. Miller Signed-off-by: Andy Lutomirski Signed-off-by: David S. Miller --- net/socket.c | 33 +++++++++++++++++++++++++++++++-- 1 file changed, 31 insertions(+), 2 deletions(-) diff --git a/net/socket.c b/net/socket.c index 6b94633ca61d..9ff6366fee13 100644 --- a/net/socket.c +++ b/net/socket.c @@ -2075,8 +2075,12 @@ SYSCALL_DEFINE3(sendmsg, int, fd, struct msghdr __user *, msg, unsigned int, fla { int fput_needed, err; struct msghdr msg_sys; - struct socket *sock = sockfd_lookup_light(fd, &err, &fput_needed); + struct socket *sock; + + if (flags & MSG_CMSG_COMPAT) + return -EINVAL; + sock = sockfd_lookup_light(fd, &err, &fput_needed); if (!sock) goto out; @@ -2149,6 +2153,8 @@ int __sys_sendmmsg(int fd, struct mmsghdr __user *mmsg, unsigned int vlen, SYSCALL_DEFINE4(sendmmsg, int, fd, struct mmsghdr __user *, mmsg, unsigned int, vlen, unsigned int, flags) { + if (flags & MSG_CMSG_COMPAT) + return -EINVAL; return __sys_sendmmsg(fd, mmsg, vlen, flags); } @@ -2249,8 +2255,12 @@ SYSCALL_DEFINE3(recvmsg, int, fd, struct msghdr __user *, msg, { int fput_needed, err; struct msghdr msg_sys; - struct socket *sock = sockfd_lookup_light(fd, &err, &fput_needed); + struct socket *sock; + + if (flags & MSG_CMSG_COMPAT) + return -EINVAL; + sock = sockfd_lookup_light(fd, &err, &fput_needed); if (!sock) goto out; @@ -2375,6 +2385,9 @@ SYSCALL_DEFINE5(recvmmsg, int, fd, struct mmsghdr __user *, mmsg, int datagrams; struct timespec timeout_sys; + if (flags & MSG_CMSG_COMPAT) + return -EINVAL; + if (!timeout) return __sys_recvmmsg(fd, mmsg, vlen, flags, NULL); @@ -2492,15 +2505,31 @@ SYSCALL_DEFINE2(socketcall, int, call, unsigned long __user *, args) (int __user *)a[4]); break; case SYS_SENDMSG: + if (a[2] & MSG_CMSG_COMPAT) { + err = -EINVAL; + break; + } err = sys_sendmsg(a0, (struct msghdr __user *)a1, a[2]); break; case SYS_SENDMMSG: + if (a[3] & MSG_CMSG_COMPAT) { + err = -EINVAL; + break; + } err = sys_sendmmsg(a0, (struct mmsghdr __user *)a1, a[2], a[3]); break; case SYS_RECVMSG: + if (a[2] & MSG_CMSG_COMPAT) { + err = -EINVAL; + break; + } err = sys_recvmsg(a0, (struct msghdr __user *)a1, a[2]); break; case SYS_RECVMMSG: + if (a[3] & MSG_CMSG_COMPAT) { + err = -EINVAL; + break; + } err = sys_recvmmsg(a0, (struct mmsghdr __user *)a1, a[2], a[3], (struct timespec __user *)a[4]); break; -- cgit v1.2.3 From 456db6a4d495f40777da6f1f32f62f13026f52db Mon Sep 17 00:00:00 2001 From: Federico Vaga Date: Tue, 28 May 2013 05:02:44 +0000 Subject: net/core/sock.c: add missing VSOCK string in af_family_*_key_strings The three arrays of strings: af_family_key_strings, af_family_slock_key_strings and af_family_clock_key_strings have not VSOCK's string Signed-off-by: Federico Vaga Signed-off-by: David S. Miller --- net/core/sock.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/net/core/sock.c b/net/core/sock.c index 6ba327da79e1..88868a9d21da 100644 --- a/net/core/sock.c +++ b/net/core/sock.c @@ -210,7 +210,7 @@ static const char *const af_family_key_strings[AF_MAX+1] = { "sk_lock-AF_TIPC" , "sk_lock-AF_BLUETOOTH", "sk_lock-IUCV" , "sk_lock-AF_RXRPC" , "sk_lock-AF_ISDN" , "sk_lock-AF_PHONET" , "sk_lock-AF_IEEE802154", "sk_lock-AF_CAIF" , "sk_lock-AF_ALG" , - "sk_lock-AF_NFC" , "sk_lock-AF_MAX" + "sk_lock-AF_NFC" , "sk_lock-AF_VSOCK" , "sk_lock-AF_MAX" }; static const char *const af_family_slock_key_strings[AF_MAX+1] = { "slock-AF_UNSPEC", "slock-AF_UNIX" , "slock-AF_INET" , @@ -226,7 +226,7 @@ static const char *const af_family_slock_key_strings[AF_MAX+1] = { "slock-AF_TIPC" , "slock-AF_BLUETOOTH", "slock-AF_IUCV" , "slock-AF_RXRPC" , "slock-AF_ISDN" , "slock-AF_PHONET" , "slock-AF_IEEE802154", "slock-AF_CAIF" , "slock-AF_ALG" , - "slock-AF_NFC" , "slock-AF_MAX" + "slock-AF_NFC" , "slock-AF_VSOCK" ,"slock-AF_MAX" }; static const char *const af_family_clock_key_strings[AF_MAX+1] = { "clock-AF_UNSPEC", "clock-AF_UNIX" , "clock-AF_INET" , @@ -242,7 +242,7 @@ static const char *const af_family_clock_key_strings[AF_MAX+1] = { "clock-AF_TIPC" , "clock-AF_BLUETOOTH", "clock-AF_IUCV" , "clock-AF_RXRPC" , "clock-AF_ISDN" , "clock-AF_PHONET" , "clock-AF_IEEE802154", "clock-AF_CAIF" , "clock-AF_ALG" , - "clock-AF_NFC" , "clock-AF_MAX" + "clock-AF_NFC" , "clock-AF_VSOCK" , "clock-AF_MAX" }; /* -- cgit v1.2.3 From 8e6d91ae0917bf934ed86411148f79d904728d51 Mon Sep 17 00:00:00 2001 From: Jason Wang Date: Tue, 28 May 2013 18:32:11 +0000 Subject: tuntap: forbid changing mq flag for persistent device We currently allow changing the mq flag (IFF_MULTI_QUEUE) for a persistent device. This will result a mismatch between the number the queues in netdev and tuntap. This is because we only allocate a 1q netdevice when IFF_MULTI_QUEUE was not specified, so when we set the IFF_MULTI_QUEUE and try to attach more queues later, netif_set_real_num_tx_queues() may fail which result a single queue netdevice with multiple sockets attached. Solve this by disallowing changing the mq flag for persistent device. Bug was introduced by commit edfb6a148ce62e5e19354a1dcd9a34e00815c2a1 (tuntap: reduce memory using of queues). Reported-by: Sriram Narasimhan Cc: Michael S. Tsirkin Signed-off-by: Jason Wang Signed-off-by: David S. Miller --- drivers/net/tun.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/net/tun.c b/drivers/net/tun.c index f042b0373e5d..89776c592151 100644 --- a/drivers/net/tun.c +++ b/drivers/net/tun.c @@ -1585,6 +1585,10 @@ static int tun_set_iff(struct net *net, struct file *file, struct ifreq *ifr) else return -EINVAL; + if (!!(ifr->ifr_flags & IFF_MULTI_QUEUE) != + !!(tun->flags & TUN_TAP_MQ)) + return -EINVAL; + if (tun_not_capable(tun)) return -EPERM; err = security_tun_dev_open(tun->security); -- cgit v1.2.3 From d660164d79b67f879db35a7d61e47d3b99bc714e Mon Sep 17 00:00:00 2001 From: Michal Kubeček Date: Tue, 28 May 2013 22:37:03 +0000 Subject: netfilter: xt_LOG: fix mark logging for IPv6 packets In dump_ipv6_packet(), the "recurse" parameter is zero only if dumping contents of a packet embedded into an ICMPv6 error message. Therefore we want to log packet mark if recurse is non-zero, not when it is zero. Signed-off-by: Michal Kubecek Signed-off-by: Pablo Neira Ayuso --- net/netfilter/xt_LOG.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/netfilter/xt_LOG.c b/net/netfilter/xt_LOG.c index 491c7d821a0b..5ab24843370a 100644 --- a/net/netfilter/xt_LOG.c +++ b/net/netfilter/xt_LOG.c @@ -737,7 +737,7 @@ static void dump_ipv6_packet(struct sbuff *m, dump_sk_uid_gid(m, skb->sk); /* Max length: 16 "MARK=0xFFFFFFFF " */ - if (!recurse && skb->mark) + if (recurse && skb->mark) sb_add(m, "MARK=0x%x ", skb->mark); } -- cgit v1.2.3 From 2abb274629614bef4044a0b98ada42e977feadfd Mon Sep 17 00:00:00 2001 From: Aurelien Chartier Date: Tue, 28 May 2013 18:09:56 +0100 Subject: xenbus: delay xenbus frontend resume if xenstored is not running If the xenbus frontend is located in a domain running xenstored, the device resume is hanging because it is happening before the process resume. This patch adds extra logic to the resume code to check if we are the domain running xenstored and delay the resume if needed. Signed-off-by: Aurelien Chartier [Changes in v2: - Instead of bypassing the resume, process it in a workqueue] [Changes in v3: - Add a struct work in xenbus_device to avoid dynamic allocation - Several small code fixes] [Changes in v4: - Use a dedicated workqueue] [Changes in v5: - Move create_workqueue error handling to xenbus_frontend_dev_resume] Acked-by: Jan Beulich Signed-off-by: Konrad Rzeszutek Wilk --- drivers/xen/xenbus/xenbus_probe_frontend.c | 37 +++++++++++++++++++++++++++++- include/xen/xenbus.h | 1 + 2 files changed, 37 insertions(+), 1 deletion(-) diff --git a/drivers/xen/xenbus/xenbus_probe_frontend.c b/drivers/xen/xenbus/xenbus_probe_frontend.c index 3159a37d966d..a7e25073de19 100644 --- a/drivers/xen/xenbus/xenbus_probe_frontend.c +++ b/drivers/xen/xenbus/xenbus_probe_frontend.c @@ -29,6 +29,8 @@ #include "xenbus_probe.h" +static struct workqueue_struct *xenbus_frontend_wq; + /* device// => - */ static int frontend_bus_id(char bus_id[XEN_BUS_ID_SIZE], const char *nodename) { @@ -89,9 +91,40 @@ static void backend_changed(struct xenbus_watch *watch, xenbus_otherend_changed(watch, vec, len, 1); } +static void xenbus_frontend_delayed_resume(struct work_struct *w) +{ + struct xenbus_device *xdev = container_of(w, struct xenbus_device, work); + + xenbus_dev_resume(&xdev->dev); +} + +static int xenbus_frontend_dev_resume(struct device *dev) +{ + /* + * If xenstored is running in this domain, we cannot access the backend + * state at the moment, so we need to defer xenbus_dev_resume + */ + if (xen_store_domain_type == XS_LOCAL) { + struct xenbus_device *xdev = to_xenbus_device(dev); + + if (!xenbus_frontend_wq) { + pr_err("%s: no workqueue to process delayed resume\n", + xdev->nodename); + return -EFAULT; + } + + INIT_WORK(&xdev->work, xenbus_frontend_delayed_resume); + queue_work(xenbus_frontend_wq, &xdev->work); + + return 0; + } + + return xenbus_dev_resume(dev); +} + static const struct dev_pm_ops xenbus_pm_ops = { .suspend = xenbus_dev_suspend, - .resume = xenbus_dev_resume, + .resume = xenbus_frontend_dev_resume, .freeze = xenbus_dev_suspend, .thaw = xenbus_dev_cancel, .restore = xenbus_dev_resume, @@ -440,6 +473,8 @@ static int __init xenbus_probe_frontend_init(void) register_xenstore_notifier(&xenstore_notifier); + xenbus_frontend_wq = create_workqueue("xenbus_frontend"); + return 0; } subsys_initcall(xenbus_probe_frontend_init); diff --git a/include/xen/xenbus.h b/include/xen/xenbus.h index 0a7515c1e3a4..569c07f2e344 100644 --- a/include/xen/xenbus.h +++ b/include/xen/xenbus.h @@ -70,6 +70,7 @@ struct xenbus_device { struct device dev; enum xenbus_state state; struct completion down; + struct work_struct work; }; static inline struct xenbus_device *to_xenbus_device(struct device *dev) -- cgit v1.2.3 From 33c1174bae3ea8f420abce53cf8aded778987583 Mon Sep 17 00:00:00 2001 From: Aurelien Chartier Date: Tue, 28 May 2013 18:09:55 +0100 Subject: xenbus: save xenstore local status for later use Save the xenstore local status computed in xenbus_init. It can then be used later to check if xenstored is running in this domain. Signed-off-by: Aurelien Chartier [Changes in v4: - Change variable name to xen_store_domain_type] Reviewed-by: David Vrabel Signed-off-by: Konrad Rzeszutek Wilk --- drivers/xen/xenbus/xenbus_comms.h | 1 + drivers/xen/xenbus/xenbus_probe.c | 27 ++++++++++++--------------- drivers/xen/xenbus/xenbus_probe.h | 7 +++++++ 3 files changed, 20 insertions(+), 15 deletions(-) diff --git a/drivers/xen/xenbus/xenbus_comms.h b/drivers/xen/xenbus/xenbus_comms.h index c8abd3b8a6c4..e74f9c1fbd80 100644 --- a/drivers/xen/xenbus/xenbus_comms.h +++ b/drivers/xen/xenbus/xenbus_comms.h @@ -45,6 +45,7 @@ int xb_wait_for_data_to_read(void); int xs_input_avail(void); extern struct xenstore_domain_interface *xen_store_interface; extern int xen_store_evtchn; +extern enum xenstore_init xen_store_domain_type; extern const struct file_operations xen_xenbus_fops; diff --git a/drivers/xen/xenbus/xenbus_probe.c b/drivers/xen/xenbus/xenbus_probe.c index 3325884c693f..56cfaaa9d006 100644 --- a/drivers/xen/xenbus/xenbus_probe.c +++ b/drivers/xen/xenbus/xenbus_probe.c @@ -69,6 +69,9 @@ EXPORT_SYMBOL_GPL(xen_store_evtchn); struct xenstore_domain_interface *xen_store_interface; EXPORT_SYMBOL_GPL(xen_store_interface); +enum xenstore_init xen_store_domain_type; +EXPORT_SYMBOL_GPL(xen_store_domain_type); + static unsigned long xen_store_mfn; static BLOCKING_NOTIFIER_HEAD(xenstore_chain); @@ -719,17 +722,11 @@ static int __init xenstored_local_init(void) return err; } -enum xenstore_init { - UNKNOWN, - PV, - HVM, - LOCAL, -}; static int __init xenbus_init(void) { int err = 0; - enum xenstore_init usage = UNKNOWN; uint64_t v = 0; + xen_store_domain_type = XS_UNKNOWN; if (!xen_domain()) return -ENODEV; @@ -737,29 +734,29 @@ static int __init xenbus_init(void) xenbus_ring_ops_init(); if (xen_pv_domain()) - usage = PV; + xen_store_domain_type = XS_PV; if (xen_hvm_domain()) - usage = HVM; + xen_store_domain_type = XS_HVM; if (xen_hvm_domain() && xen_initial_domain()) - usage = LOCAL; + xen_store_domain_type = XS_LOCAL; if (xen_pv_domain() && !xen_start_info->store_evtchn) - usage = LOCAL; + xen_store_domain_type = XS_LOCAL; if (xen_pv_domain() && xen_start_info->store_evtchn) xenstored_ready = 1; - switch (usage) { - case LOCAL: + switch (xen_store_domain_type) { + case XS_LOCAL: err = xenstored_local_init(); if (err) goto out_error; xen_store_interface = mfn_to_virt(xen_store_mfn); break; - case PV: + case XS_PV: xen_store_evtchn = xen_start_info->store_evtchn; xen_store_mfn = xen_start_info->store_mfn; xen_store_interface = mfn_to_virt(xen_store_mfn); break; - case HVM: + case XS_HVM: err = hvm_get_parameter(HVM_PARAM_STORE_EVTCHN, &v); if (err) goto out_error; diff --git a/drivers/xen/xenbus/xenbus_probe.h b/drivers/xen/xenbus/xenbus_probe.h index bb4f92ed8730..146f857a36f8 100644 --- a/drivers/xen/xenbus/xenbus_probe.h +++ b/drivers/xen/xenbus/xenbus_probe.h @@ -47,6 +47,13 @@ struct xen_bus_type { struct bus_type bus; }; +enum xenstore_init { + XS_UNKNOWN, + XS_PV, + XS_HVM, + XS_LOCAL, +}; + extern struct device_attribute xenbus_dev_attrs[]; extern int xenbus_match(struct device *_dev, struct device_driver *_drv); -- cgit v1.2.3 From 1db01b4903639fcfaec213701a494fe3fb2c490b Mon Sep 17 00:00:00 2001 From: Stefan Bader Date: Wed, 8 May 2013 16:37:35 +0200 Subject: xen: Clean up apic ipi interface Commit f447d56d36af18c5104ff29dcb1327c0c0ac3634 introduced the implementation of the PV apic ipi interface. But there were some odd things (it seems none of which cause really any issue but maybe they should be cleaned up anyway): - xen_send_IPI_mask_allbutself (and by that xen_send_IPI_allbutself) ignore the passed in vector and only use the CALL_FUNCTION_SINGLE vector. While xen_send_IPI_all and xen_send_IPI_mask use the vector. - physflat_send_IPI_allbutself is declared unnecessarily. It is never used. This patch tries to clean up those things. Signed-off-by: Stefan Bader Signed-off-by: Konrad Rzeszutek Wilk --- arch/x86/xen/smp.c | 10 ++++------ arch/x86/xen/smp.h | 1 - 2 files changed, 4 insertions(+), 7 deletions(-) diff --git a/arch/x86/xen/smp.c b/arch/x86/xen/smp.c index 8ff37995d54e..fb44426fe931 100644 --- a/arch/x86/xen/smp.c +++ b/arch/x86/xen/smp.c @@ -576,24 +576,22 @@ void xen_send_IPI_mask_allbutself(const struct cpumask *mask, { unsigned cpu; unsigned int this_cpu = smp_processor_id(); + int xen_vector = xen_map_vector(vector); - if (!(num_online_cpus() > 1)) + if (!(num_online_cpus() > 1) || (xen_vector < 0)) return; for_each_cpu_and(cpu, mask, cpu_online_mask) { if (this_cpu == cpu) continue; - xen_smp_send_call_function_single_ipi(cpu); + xen_send_IPI_one(cpu, xen_vector); } } void xen_send_IPI_allbutself(int vector) { - int xen_vector = xen_map_vector(vector); - - if (xen_vector >= 0) - xen_send_IPI_mask_allbutself(cpu_online_mask, xen_vector); + xen_send_IPI_mask_allbutself(cpu_online_mask, vector); } static irqreturn_t xen_call_function_interrupt(int irq, void *dev_id) diff --git a/arch/x86/xen/smp.h b/arch/x86/xen/smp.h index 8981a76d081a..c7c2d89efd76 100644 --- a/arch/x86/xen/smp.h +++ b/arch/x86/xen/smp.h @@ -5,7 +5,6 @@ extern void xen_send_IPI_mask(const struct cpumask *mask, extern void xen_send_IPI_mask_allbutself(const struct cpumask *mask, int vector); extern void xen_send_IPI_allbutself(int vector); -extern void physflat_send_IPI_allbutself(int vector); extern void xen_send_IPI_all(int vector); extern void xen_send_IPI_self(int vector); -- cgit v1.2.3 From d69c0e3975e4955dd596c162d1628ba1dbb1eb45 Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Wed, 29 May 2013 13:31:15 +0100 Subject: xen-pciback: more uses of cached MSI-X capability offset Signed-off-by: Jan Beulich Signed-off-by: Konrad Rzeszutek Wilk --- drivers/xen/xen-pciback/pci_stub.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/xen/xen-pciback/pci_stub.c b/drivers/xen/xen-pciback/pci_stub.c index a2278ba7fb27..4e8ba38aa0c9 100644 --- a/drivers/xen/xen-pciback/pci_stub.c +++ b/drivers/xen/xen-pciback/pci_stub.c @@ -106,7 +106,7 @@ static void pcistub_device_release(struct kref *kref) else pci_restore_state(dev); - if (pci_find_capability(dev, PCI_CAP_ID_MSIX)) { + if (dev->msix_cap) { struct physdev_pci_device ppdev = { .seg = pci_domain_nr(dev->bus), .bus = dev->bus->number, @@ -371,7 +371,7 @@ static int pcistub_init_device(struct pci_dev *dev) if (err) goto config_release; - if (pci_find_capability(dev, PCI_CAP_ID_MSIX)) { + if (dev->msix_cap) { struct physdev_pci_device ppdev = { .seg = pci_domain_nr(dev->bus), .bus = dev->bus->number, -- cgit v1.2.3 From afe3c3fd5392b2f0066930abc5dbd3f4b14a0f13 Mon Sep 17 00:00:00 2001 From: "J. Bruce Fields" Date: Fri, 24 May 2013 17:24:34 -0400 Subject: svcrpc: fix failures to handle -1 uid's and gid's As of f025adf191924e3a75ce80e130afcd2485b53bb8 "sunrpc: Properly decode kuids and kgids in RPC_AUTH_UNIX credentials" any rpc containing a -1 (0xffff) uid or gid would fail with a badcred error. Reported symptoms were xmbc clients failing on upgrade of the NFS server; examination of the network trace showed them sending -1 as the gid. Reported-by: Julian Sikorski Tested-by: Julian Sikorski Cc: "Eric W. Biederman" Cc: stable@vger.kernel.org Signed-off-by: J. Bruce Fields --- net/sunrpc/svcauth_unix.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) diff --git a/net/sunrpc/svcauth_unix.c b/net/sunrpc/svcauth_unix.c index c3f9e1ef7f53..06bdf5a1082c 100644 --- a/net/sunrpc/svcauth_unix.c +++ b/net/sunrpc/svcauth_unix.c @@ -810,11 +810,15 @@ svcauth_unix_accept(struct svc_rqst *rqstp, __be32 *authp) goto badcred; argv->iov_base = (void*)((__be32*)argv->iov_base + slen); /* skip machname */ argv->iov_len -= slen*4; - + /* + * Note: we skip uid_valid()/gid_valid() checks here for + * backwards compatibility with clients that use -1 id's. + * Instead, -1 uid or gid is later mapped to the + * (export-specific) anonymous id by nfsd_setuser. + * Supplementary gid's will be left alone. + */ cred->cr_uid = make_kuid(&init_user_ns, svc_getnl(argv)); /* uid */ cred->cr_gid = make_kgid(&init_user_ns, svc_getnl(argv)); /* gid */ - if (!uid_valid(cred->cr_uid) || !gid_valid(cred->cr_gid)) - goto badcred; slen = svc_getnl(argv); /* gids length */ if (slen > 16 || (len -= (slen + 2)*4) < 0) goto badcred; @@ -823,8 +827,6 @@ svcauth_unix_accept(struct svc_rqst *rqstp, __be32 *authp) return SVC_CLOSE; for (i = 0; i < slen; i++) { kgid_t kgid = make_kgid(&init_user_ns, svc_getnl(argv)); - if (!gid_valid(kgid)) - goto badcred; GROUP_AT(cred->cr_group_info, i) = kgid; } if (svc_getu32(argv) != htonl(RPC_AUTH_NULL) || svc_getu32(argv) != 0) { -- cgit v1.2.3 From 27b0705c68dab67a6c8ffa19869aeca3eaf75d78 Mon Sep 17 00:00:00 2001 From: Christian König Date: Tue, 21 May 2013 17:14:18 +0200 Subject: drm/radeon: UVD block on SUMO2 is the same as on SUMO MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The chip id for SUMO2 isn't used. fixes: https://bugs.freedesktop.org/show_bug.cgi?id=63935 Tested-By: Dave Witbrodt Signed-off-by: Christian König Signed-off-by: Alex Deucher --- drivers/gpu/drm/radeon/rv770.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/drivers/gpu/drm/radeon/rv770.c b/drivers/gpu/drm/radeon/rv770.c index 83f612a9500b..3fc2985445ee 100644 --- a/drivers/gpu/drm/radeon/rv770.c +++ b/drivers/gpu/drm/radeon/rv770.c @@ -862,10 +862,8 @@ int rv770_uvd_resume(struct radeon_device *rdev) chip_id = 0x0100000b; break; case CHIP_SUMO: - chip_id = 0x0100000c; - break; case CHIP_SUMO2: - chip_id = 0x0100000d; + chip_id = 0x0100000c; break; case CHIP_PALM: chip_id = 0x0100000e; -- cgit v1.2.3 From 468ef1a58c9268ac9709350bf95eaf1c22a69f29 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Tue, 21 May 2013 13:35:19 -0400 Subject: drm/radeon: fix typo in cu_per_sh on verde Should be 5 rather than 2. Noticed by sroland and glisse on IRC. Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/radeon/si.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/radeon/si.c b/drivers/gpu/drm/radeon/si.c index 5ffade69af25..d1ba9d88f311 100644 --- a/drivers/gpu/drm/radeon/si.c +++ b/drivers/gpu/drm/radeon/si.c @@ -2616,7 +2616,7 @@ static void si_gpu_init(struct radeon_device *rdev) default: rdev->config.si.max_shader_engines = 1; rdev->config.si.max_tile_pipes = 4; - rdev->config.si.max_cu_per_sh = 2; + rdev->config.si.max_cu_per_sh = 5; rdev->config.si.max_sh_per_se = 2; rdev->config.si.max_backends_per_se = 4; rdev->config.si.max_texture_channel_caches = 4; -- cgit v1.2.3 From 09fb8bd1a63b0f9f15e655c4fe8d047e5d2bf67a Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Wed, 22 May 2013 11:22:51 -0400 Subject: drm/radeon: fix card_posted check for newer asics MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Newer asics have variable numbers of crtcs. Use that rather than the asic family to determine which crtcs to check. This avoids checking non-existent crtcs or missing crtcs on certain asics. Reviewed-by: Michel Dänzer Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/radeon/radeon_device.c | 19 +++++++++---------- 1 file changed, 9 insertions(+), 10 deletions(-) diff --git a/drivers/gpu/drm/radeon/radeon_device.c b/drivers/gpu/drm/radeon/radeon_device.c index c2c59fb1ea01..89cc8166db94 100644 --- a/drivers/gpu/drm/radeon/radeon_device.c +++ b/drivers/gpu/drm/radeon/radeon_device.c @@ -472,18 +472,17 @@ bool radeon_card_posted(struct radeon_device *rdev) return false; /* first check CRTCs */ - if (ASIC_IS_DCE41(rdev)) { + if (ASIC_IS_DCE4(rdev)) { reg = RREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC0_REGISTER_OFFSET) | RREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC1_REGISTER_OFFSET); - if (reg & EVERGREEN_CRTC_MASTER_EN) - return true; - } else if (ASIC_IS_DCE4(rdev)) { - reg = RREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC0_REGISTER_OFFSET) | - RREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC1_REGISTER_OFFSET) | - RREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC2_REGISTER_OFFSET) | - RREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC3_REGISTER_OFFSET) | - RREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC4_REGISTER_OFFSET) | - RREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC5_REGISTER_OFFSET); + if (rdev->num_crtc >= 4) { + reg |= RREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC2_REGISTER_OFFSET) | + RREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC3_REGISTER_OFFSET); + } + if (rdev->num_crtc >= 6) { + reg |= RREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC4_REGISTER_OFFSET) | + RREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC5_REGISTER_OFFSET); + } if (reg & EVERGREEN_CRTC_MASTER_EN) return true; } else if (ASIC_IS_AVIVO(rdev)) { -- cgit v1.2.3 From 2cf3a4fcc64e5b54a8a3cd793c6c0024b5d8da6c Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Wed, 22 May 2013 11:30:34 -0400 Subject: drm/radeon: don't check crtcs in card_posted() on cards without DCE Skip checking crtcs in hardware without them. Avoids checking non-existent hardware. Signed-off-by: Alex Deucher --- drivers/gpu/drm/radeon/radeon_device.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/gpu/drm/radeon/radeon_device.c b/drivers/gpu/drm/radeon/radeon_device.c index 89cc8166db94..af82c9b6a28b 100644 --- a/drivers/gpu/drm/radeon/radeon_device.c +++ b/drivers/gpu/drm/radeon/radeon_device.c @@ -471,6 +471,9 @@ bool radeon_card_posted(struct radeon_device *rdev) rdev->pdev->subsystem_vendor == PCI_VENDOR_ID_APPLE) return false; + if (ASIC_IS_NODCE(rdev)) + goto check_memsize; + /* first check CRTCs */ if (ASIC_IS_DCE4(rdev)) { reg = RREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC0_REGISTER_OFFSET) | @@ -499,6 +502,7 @@ bool radeon_card_posted(struct radeon_device *rdev) } } +check_memsize: /* then check MEM_SIZE, in case the crtcs are off */ if (rdev->family >= CHIP_R600) reg = RREG32(R600_CONFIG_MEMSIZE); -- cgit v1.2.3 From a70b9641e6a90d6821e4354a2c2fede74015db29 Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Wed, 29 May 2013 13:33:51 +0100 Subject: ipvs: ip_vs_sh: fix build kfree_rcu() requires offsetof(..., rcu_head) < 4096, which can get violated with a sufficiently high CONFIG_IP_VS_SH_TAB_BITS. Signed-off-by: Jan Beulich Signed-off-by: Simon Horman Signed-off-by: Pablo Neira Ayuso --- net/netfilter/ipvs/ip_vs_sh.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/netfilter/ipvs/ip_vs_sh.c b/net/netfilter/ipvs/ip_vs_sh.c index 0df269d7c99f..a65edfe4b16c 100644 --- a/net/netfilter/ipvs/ip_vs_sh.c +++ b/net/netfilter/ipvs/ip_vs_sh.c @@ -67,8 +67,8 @@ struct ip_vs_sh_bucket { #define IP_VS_SH_TAB_MASK (IP_VS_SH_TAB_SIZE - 1) struct ip_vs_sh_state { - struct ip_vs_sh_bucket buckets[IP_VS_SH_TAB_SIZE]; struct rcu_head rcu_head; + struct ip_vs_sh_bucket buckets[IP_VS_SH_TAB_SIZE]; }; /* -- cgit v1.2.3 From 50a583f64bfe53aae4996965c1d1b25d90ce4f64 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Wed, 22 May 2013 13:29:33 -0400 Subject: drm/radeon: narrow scope of Apple re-POST hack This narrows the scope of the apple re-POST hack added in: drm/radeon: re-POST the asic on Apple hardware when booted via EFI That patch prevents UVD from working on macs when booted in EFI mode. The original patch fixed macbook2,1 systems which were r5xx and hence have no UVD. Limit the hack to those systems to prevent UVD breakage on newer systems. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=63935 Cc: Matthew Garrett Signed-off-by: Alex Deucher Acked-by: Matthew Garrett --- drivers/gpu/drm/radeon/radeon_device.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/radeon/radeon_device.c b/drivers/gpu/drm/radeon/radeon_device.c index af82c9b6a28b..189973836cff 100644 --- a/drivers/gpu/drm/radeon/radeon_device.c +++ b/drivers/gpu/drm/radeon/radeon_device.c @@ -467,8 +467,10 @@ bool radeon_card_posted(struct radeon_device *rdev) { uint32_t reg; + /* required for EFI mode on macbook2,1 which uses an r5xx asic */ if (efi_enabled(EFI_BOOT) && - rdev->pdev->subsystem_vendor == PCI_VENDOR_ID_APPLE) + (rdev->pdev->subsystem_vendor == PCI_VENDOR_ID_APPLE) && + (rdev->family < CHIP_R600)) return false; if (ASIC_IS_NODCE(rdev)) -- cgit v1.2.3 From 7e0e41963740525af702bb23edede8ae9afc4ac0 Mon Sep 17 00:00:00 2001 From: Kleber Sacilotto de Souza Date: Fri, 3 May 2013 19:43:13 -0300 Subject: radeon: use max_bus_speed to activate gen2 speeds radeon currently uses a drm function to get the speed capabilities for the bus, drm_pcie_get_speed_cap_mask. However, this is a non-standard method of performing this detection and this patch changes it to use the max_bus_speed attribute. From: Lucas Kannebley Tavares Signed-off-by: Kleber Sacilotto de Souza Signed-off-by: Alex Deucher --- drivers/gpu/drm/radeon/evergreen.c | 10 +++------- drivers/gpu/drm/radeon/r600.c | 9 ++------- drivers/gpu/drm/radeon/rv770.c | 9 ++------- 3 files changed, 7 insertions(+), 21 deletions(-) diff --git a/drivers/gpu/drm/radeon/evergreen.c b/drivers/gpu/drm/radeon/evergreen.c index 8f9e2d31b255..8546e3b333b4 100644 --- a/drivers/gpu/drm/radeon/evergreen.c +++ b/drivers/gpu/drm/radeon/evergreen.c @@ -4999,8 +4999,7 @@ void evergreen_fini(struct radeon_device *rdev) void evergreen_pcie_gen2_enable(struct radeon_device *rdev) { - u32 link_width_cntl, speed_cntl, mask; - int ret; + u32 link_width_cntl, speed_cntl; if (radeon_pcie_gen2 == 0) return; @@ -5015,11 +5014,8 @@ void evergreen_pcie_gen2_enable(struct radeon_device *rdev) if (ASIC_IS_X2(rdev)) return; - ret = drm_pcie_get_speed_cap_mask(rdev->ddev, &mask); - if (ret != 0) - return; - - if (!(mask & DRM_PCIE_SPEED_50)) + if ((rdev->pdev->bus->max_bus_speed != PCIE_SPEED_5_0GT) && + (rdev->pdev->bus->max_bus_speed != PCIE_SPEED_8_0GT)) return; speed_cntl = RREG32_PCIE_PORT(PCIE_LC_SPEED_CNTL); diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c index 1a08008c978b..b45e64848677 100644 --- a/drivers/gpu/drm/radeon/r600.c +++ b/drivers/gpu/drm/radeon/r600.c @@ -4631,8 +4631,6 @@ static void r600_pcie_gen2_enable(struct radeon_device *rdev) { u32 link_width_cntl, lanes, speed_cntl, training_cntl, tmp; u16 link_cntl2; - u32 mask; - int ret; if (radeon_pcie_gen2 == 0) return; @@ -4651,11 +4649,8 @@ static void r600_pcie_gen2_enable(struct radeon_device *rdev) if (rdev->family <= CHIP_R600) return; - ret = drm_pcie_get_speed_cap_mask(rdev->ddev, &mask); - if (ret != 0) - return; - - if (!(mask & DRM_PCIE_SPEED_50)) + if ((rdev->pdev->bus->max_bus_speed != PCIE_SPEED_5_0GT) && + (rdev->pdev->bus->max_bus_speed != PCIE_SPEED_8_0GT)) return; speed_cntl = RREG32_PCIE_PORT(PCIE_LC_SPEED_CNTL); diff --git a/drivers/gpu/drm/radeon/rv770.c b/drivers/gpu/drm/radeon/rv770.c index 3fc2985445ee..08aef24afe40 100644 --- a/drivers/gpu/drm/radeon/rv770.c +++ b/drivers/gpu/drm/radeon/rv770.c @@ -2111,8 +2111,6 @@ static void rv770_pcie_gen2_enable(struct radeon_device *rdev) { u32 link_width_cntl, lanes, speed_cntl, tmp; u16 link_cntl2; - u32 mask; - int ret; if (radeon_pcie_gen2 == 0) return; @@ -2127,11 +2125,8 @@ static void rv770_pcie_gen2_enable(struct radeon_device *rdev) if (ASIC_IS_X2(rdev)) return; - ret = drm_pcie_get_speed_cap_mask(rdev->ddev, &mask); - if (ret != 0) - return; - - if (!(mask & DRM_PCIE_SPEED_50)) + if ((rdev->pdev->bus->max_bus_speed != PCIE_SPEED_5_0GT) && + (rdev->pdev->bus->max_bus_speed != PCIE_SPEED_8_0GT)) return; DRM_INFO("enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0\n"); -- cgit v1.2.3 From dd4704480372fdbf3e8f7826274a883c4c7c335a Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Wed, 8 May 2013 14:29:03 +0100 Subject: clk: ux500: Provide device enumeration number suffix for SMSC911x First Ethernet device has a ".0" appended onto the device name. It appears that we need this in order to obtain the correct clock. Without this fix Ethernet does not function on Ux500 devices, which is a regression. Cc: Ulf Hansson Signed-off-by: Lee Jones Signed-off-by: Mike Turquette [mturquette@linaro.org: improved changelog] --- drivers/clk/ux500/u8500_clk.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/clk/ux500/u8500_clk.c b/drivers/clk/ux500/u8500_clk.c index 0b4f35a5ffc2..80069c370a47 100644 --- a/drivers/clk/ux500/u8500_clk.c +++ b/drivers/clk/ux500/u8500_clk.c @@ -325,7 +325,7 @@ void u8500_clk_init(u32 clkrst1_base, u32 clkrst2_base, u32 clkrst3_base, clk = clk_reg_prcc_pclk("p3_pclk0", "per3clk", clkrst3_base, BIT(0), 0); clk_register_clkdev(clk, "fsmc", NULL); - clk_register_clkdev(clk, NULL, "smsc911x"); + clk_register_clkdev(clk, NULL, "smsc911x.0"); clk = clk_reg_prcc_pclk("p3_pclk1", "per3clk", clkrst3_base, BIT(1), 0); -- cgit v1.2.3 From f586938ba2cf83ed4cbebe96436220d182a7808e Mon Sep 17 00:00:00 2001 From: Fabio Baltieri Date: Tue, 30 Apr 2013 14:45:06 +0200 Subject: clk: ux500: clk-sysctrl: handle clocks with no parents Fix clk_reg_sysctrl() to set main clock registers of new struct clk_sysctrl even if the registered clock has no parents. This fixes an issue where "ulpclk" was registered with all clk->reg_* fields uninitialized, causing a -EINVAL error from clk_prepare(). Signed-off-by: Fabio Baltieri Acked-by: Ulf Hansson Signed-off-by: Mike Turquette --- drivers/clk/ux500/clk-sysctrl.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/drivers/clk/ux500/clk-sysctrl.c b/drivers/clk/ux500/clk-sysctrl.c index bc7e9bde792b..e364c9d4aa60 100644 --- a/drivers/clk/ux500/clk-sysctrl.c +++ b/drivers/clk/ux500/clk-sysctrl.c @@ -145,7 +145,13 @@ static struct clk *clk_reg_sysctrl(struct device *dev, return ERR_PTR(-ENOMEM); } - for (i = 0; i < num_parents; i++) { + /* set main clock registers */ + clk->reg_sel[0] = reg_sel[0]; + clk->reg_bits[0] = reg_bits[0]; + clk->reg_mask[0] = reg_mask[0]; + + /* handle clocks with more than one parent */ + for (i = 1; i < num_parents; i++) { clk->reg_sel[i] = reg_sel[i]; clk->reg_bits[i] = reg_bits[i]; clk->reg_mask[i] = reg_mask[i]; -- cgit v1.2.3 From 056f3d58db6f7d19be7dbc2aab8d049f28e20d6e Mon Sep 17 00:00:00 2001 From: Sylwester Nawrocki Date: Fri, 10 May 2013 18:38:09 +0200 Subject: clk: samsung: Add CLK_IGNORE_UNUSED flag for the sysreg clocks Currently no driver *) handles the sysreg clock, with an assumption that this clock is always left in its default state (enabled). Before commit 6e6aac7590f902d14d90bace3fd499 ARM: EXYNOS: Migrate clock support to common clock framework the sysreg clock was not even defined and hence wasn't handled explicitly in the kernel. To restore the previous behaviour disable masking the sysreg clock off in the clock core by default. *) Except the Exynos4x12 FIMC-IS driver, which will be modified to not touch the sysreg clock. Signed-off-by: Sylwester Nawrocki Signed-off-by: Kyungmin Park Signed-off-by: Mike Turquette --- drivers/clk/samsung/clk-exynos4.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/clk/samsung/clk-exynos4.c b/drivers/clk/samsung/clk-exynos4.c index d0940e69d034..3c1f88868f29 100644 --- a/drivers/clk/samsung/clk-exynos4.c +++ b/drivers/clk/samsung/clk-exynos4.c @@ -791,7 +791,8 @@ struct samsung_gate_clock exynos4210_gate_clks[] __initdata = { GATE(smmu_pcie, "smmu_pcie", "aclk133", GATE_IP_FSYS, 18, 0, 0), GATE(modemif, "modemif", "aclk100", GATE_IP_PERIL, 28, 0, 0), GATE(chipid, "chipid", "aclk100", E4210_GATE_IP_PERIR, 0, 0, 0), - GATE(sysreg, "sysreg", "aclk100", E4210_GATE_IP_PERIR, 0, 0, 0), + GATE(sysreg, "sysreg", "aclk100", E4210_GATE_IP_PERIR, 0, + CLK_IGNORE_UNUSED, 0), GATE(hdmi_cec, "hdmi_cec", "aclk100", E4210_GATE_IP_PERIR, 11, 0, 0), GATE(smmu_rotator, "smmu_rotator", "aclk200", E4210_GATE_IP_IMAGE, 4, 0, 0), @@ -819,7 +820,8 @@ struct samsung_gate_clock exynos4x12_gate_clks[] __initdata = { GATE(smmu_mdma, "smmu_mdma", "aclk200", E4X12_GATE_IP_IMAGE, 5, 0, 0), GATE(mipi_hsi, "mipi_hsi", "aclk133", GATE_IP_FSYS, 10, 0, 0), GATE(chipid, "chipid", "aclk100", E4X12_GATE_IP_PERIR, 0, 0, 0), - GATE(sysreg, "sysreg", "aclk100", E4X12_GATE_IP_PERIR, 1, 0, 0), + GATE(sysreg, "sysreg", "aclk100", E4X12_GATE_IP_PERIR, 1, + CLK_IGNORE_UNUSED, 0), GATE(hdmi_cec, "hdmi_cec", "aclk100", E4X12_GATE_IP_PERIR, 11, 0, 0), GATE(sclk_mdnie0, "sclk_mdnie0", "div_mdnie0", SRC_MASK_LCD0, 4, CLK_SET_RATE_PARENT, 0), -- cgit v1.2.3 From 8d0b8801c9e4c2c6b20cdac74dbab16facce7653 Mon Sep 17 00:00:00 2001 From: Wei Liu Date: Wed, 29 May 2013 17:02:58 +0100 Subject: xenbus_client.c: correct exit path for xenbus_map_ring_valloc_hvm Apparently we should not free page that has not been allocated. This is b/c alloc_xenballooned_pages will take care of freeing the page on its own. Signed-off-by: Wei Liu Signed-off-by: Konrad Rzeszutek Wilk --- drivers/xen/xenbus/xenbus_client.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/xen/xenbus/xenbus_client.c b/drivers/xen/xenbus/xenbus_client.c index 61786be9138b..ec097d6f964d 100644 --- a/drivers/xen/xenbus/xenbus_client.c +++ b/drivers/xen/xenbus/xenbus_client.c @@ -534,7 +534,7 @@ static int xenbus_map_ring_valloc_hvm(struct xenbus_device *dev, err = xenbus_map_ring(dev, gnt_ref, &node->handle, addr); if (err) - goto out_err; + goto out_err_free_ballooned_pages; spin_lock(&xenbus_valloc_lock); list_add(&node->next, &xenbus_valloc_pages); @@ -543,8 +543,9 @@ static int xenbus_map_ring_valloc_hvm(struct xenbus_device *dev, *vaddr = addr; return 0; - out_err: + out_err_free_ballooned_pages: free_xenballooned_pages(1, &node->page); + out_err: kfree(node); return err; } -- cgit v1.2.3 From f448badd34700ae728a32ba024249626d49c10e1 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Wed, 29 May 2013 15:36:40 -0400 Subject: NFSv4: Fix a thinko in nfs4_try_open_cached We need to pass the full open mode flags to nfs_may_open() when doing a delegated open. Signed-off-by: Trond Myklebust Cc: stable@vger.kernel.org --- fs/nfs/nfs4proc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index 4e2fe714d5c2..d7ba5616989c 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -1078,7 +1078,7 @@ static struct nfs4_state *nfs4_try_open_cached(struct nfs4_opendata *opendata) struct nfs4_state *state = opendata->state; struct nfs_inode *nfsi = NFS_I(state->inode); struct nfs_delegation *delegation; - int open_mode = opendata->o_arg.open_flags & (O_EXCL|O_TRUNC); + int open_mode = opendata->o_arg.open_flags; fmode_t fmode = opendata->o_arg.fmode; nfs4_stateid stateid; int ret = -EAGAIN; -- cgit v1.2.3 From 67e1e2268e598861dc771e3c976daf07db380638 Mon Sep 17 00:00:00 2001 From: Marek Belisko Date: Fri, 3 May 2013 07:53:22 +0200 Subject: clk: si5351: Fix clkout rate computation. Rate was incorrectly computed because we read from wrong divider register. Signed-off-by: Marek Belisko Acked-by: Sebastian Hesselbarth Signed-off-by: Mike Turquette Cc: stable@kernel.org --- drivers/clk/clk-si5351.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/clk/clk-si5351.c b/drivers/clk/clk-si5351.c index 892728412e9d..cf39e530e6e2 100644 --- a/drivers/clk/clk-si5351.c +++ b/drivers/clk/clk-si5351.c @@ -932,7 +932,7 @@ static unsigned long si5351_clkout_recalc_rate(struct clk_hw *hw, unsigned char reg; unsigned char rdiv; - if (hwdata->num > 5) + if (hwdata->num <= 5) reg = si5351_msynth_params_address(hwdata->num) + 2; else reg = SI5351_CLK6_7_OUTPUT_DIVIDER; -- cgit v1.2.3 From 6532cb71fb31436b8d31818a056f45b8f95dfb31 Mon Sep 17 00:00:00 2001 From: Marek Belisko Date: Fri, 3 May 2013 07:53:23 +0200 Subject: clk: si5351: Set initial clkout rate when defined in platform data. clock-frequency property from platform data was read but never used. Apply defined rate when clock is registered. Signed-off-by: Marek Belisko Acked-by: Sebastian Hesselbarth Signed-off-by: Mike Turquette [mturquette@linaro.org: add missing changelog] Cc: stable@kernel.org Signed-off-by: Mike Turquette --- drivers/clk/clk-si5351.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/drivers/clk/clk-si5351.c b/drivers/clk/clk-si5351.c index cf39e530e6e2..24f553673b72 100644 --- a/drivers/clk/clk-si5351.c +++ b/drivers/clk/clk-si5351.c @@ -1477,6 +1477,16 @@ static int si5351_i2c_probe(struct i2c_client *client, return -EINVAL; } drvdata->onecell.clks[n] = clk; + + /* set initial clkout rate */ + if (pdata->clkout[n].rate != 0) { + int ret; + ret = clk_set_rate(clk, pdata->clkout[n].rate); + if (ret != 0) { + dev_err(&client->dev, "Cannot set rate : %d\n", + ret); + } + } } ret = of_clk_add_provider(client->dev.of_node, of_clk_src_onecell_get, -- cgit v1.2.3 From 419e321df8d7d605f21f980903befc65ee66e848 Mon Sep 17 00:00:00 2001 From: Tony Prisk Date: Sat, 18 May 2013 09:18:49 +1200 Subject: clk: vt8500: Fix unbalanced spinlock in vt8500_dclk_set_rate() With the addition of a DVO clock, a bug is now evident in the vt8500 clock code: [ 0.290000] WARNING: at init/main.c:698 do_one_initcall+0x158/0x18c() [ 0.300000] initcall wm8505fb_driver_init+0x0/0xc returned with disabled int This is caused by an unbalanced spinlock in vt8500_dclk_set_rate(). Replace the second call to spin_lock_irqsave() with spin_unlock_irqrestore(). Signed-off-by: Tony Prisk Signed-off-by: Mike Turquette --- drivers/clk/clk-vt8500.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/clk/clk-vt8500.c b/drivers/clk/clk-vt8500.c index debf688afa8e..553ac35bcc91 100644 --- a/drivers/clk/clk-vt8500.c +++ b/drivers/clk/clk-vt8500.c @@ -183,7 +183,7 @@ static int vt8500_dclk_set_rate(struct clk_hw *hw, unsigned long rate, writel(divisor, cdev->div_reg); vt8500_pmc_wait_busy(); - spin_lock_irqsave(cdev->lock, flags); + spin_unlock_irqrestore(cdev->lock, flags); return 0; } -- cgit v1.2.3 From 9b31a328e344e62e7cc98ae574edcb7b674719bb Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger Date: Wed, 15 May 2013 00:52:44 -0700 Subject: target: Re-instate sess_wait_list for target_wait_for_sess_cmds Switch back to pre commit 1c7b13fe652 list splicing logic for active I/O shutdown with tcm_qla2xxx + ib_srpt fabrics. The original commit was done under the incorrect assumption that it's safe to walk se_sess->sess_cmd_list unprotected in target_wait_for_sess_cmds() after sess->sess_tearing_down = 1 has been set by target_sess_cmd_list_set_waiting() during session shutdown. So instead of adding sess->sess_cmd_lock protection around sess->sess_cmd_list during target_wait_for_sess_cmds(), switch back to sess->sess_wait_list to allow wait_for_completion() + TFO->release_cmd() to occur without having to walk ->sess_cmd_list after the list_splice. Also add a check to exit if target_sess_cmd_list_set_waiting() has already been called, and add a WARN_ON to check for any fabric bug where new se_cmds are added to sess->sess_cmd_list after sess->sess_tearing_down = 1 has already been set. Cc: Joern Engel Cc: Roland Dreier Cc: stable@vger.kernel.org Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_transport.c | 18 ++++++++++++++---- include/target/target_core_base.h | 1 + 2 files changed, 15 insertions(+), 4 deletions(-) diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c index 311c11349aab..bbca144821c5 100644 --- a/drivers/target/target_core_transport.c +++ b/drivers/target/target_core_transport.c @@ -221,6 +221,7 @@ struct se_session *transport_init_session(void) INIT_LIST_HEAD(&se_sess->sess_list); INIT_LIST_HEAD(&se_sess->sess_acl_list); INIT_LIST_HEAD(&se_sess->sess_cmd_list); + INIT_LIST_HEAD(&se_sess->sess_wait_list); spin_lock_init(&se_sess->sess_cmd_lock); kref_init(&se_sess->sess_kref); @@ -2250,11 +2251,14 @@ void target_sess_cmd_list_set_waiting(struct se_session *se_sess) unsigned long flags; spin_lock_irqsave(&se_sess->sess_cmd_lock, flags); - - WARN_ON(se_sess->sess_tearing_down); + if (se_sess->sess_tearing_down) { + spin_unlock_irqrestore(&se_sess->sess_cmd_lock, flags); + return; + } se_sess->sess_tearing_down = 1; + list_splice_init(&se_sess->sess_cmd_list, &se_sess->sess_wait_list); - list_for_each_entry(se_cmd, &se_sess->sess_cmd_list, se_cmd_list) + list_for_each_entry(se_cmd, &se_sess->sess_wait_list, se_cmd_list) se_cmd->cmd_wait_set = 1; spin_unlock_irqrestore(&se_sess->sess_cmd_lock, flags); @@ -2267,9 +2271,10 @@ EXPORT_SYMBOL(target_sess_cmd_list_set_waiting); void target_wait_for_sess_cmds(struct se_session *se_sess) { struct se_cmd *se_cmd, *tmp_cmd; + unsigned long flags; list_for_each_entry_safe(se_cmd, tmp_cmd, - &se_sess->sess_cmd_list, se_cmd_list) { + &se_sess->sess_wait_list, se_cmd_list) { list_del(&se_cmd->se_cmd_list); pr_debug("Waiting for se_cmd: %p t_state: %d, fabric state:" @@ -2283,6 +2288,11 @@ void target_wait_for_sess_cmds(struct se_session *se_sess) se_cmd->se_tfo->release_cmd(se_cmd); } + + spin_lock_irqsave(&se_sess->sess_cmd_lock, flags); + WARN_ON(!list_empty(&se_sess->sess_cmd_list)); + spin_unlock_irqrestore(&se_sess->sess_cmd_lock, flags); + } EXPORT_SYMBOL(target_wait_for_sess_cmds); diff --git a/include/target/target_core_base.h b/include/target/target_core_base.h index e773dfa5f98f..4ea4f985f394 100644 --- a/include/target/target_core_base.h +++ b/include/target/target_core_base.h @@ -543,6 +543,7 @@ struct se_session { struct list_head sess_list; struct list_head sess_acl_list; struct list_head sess_cmd_list; + struct list_head sess_wait_list; spinlock_t sess_cmd_lock; struct kref sess_kref; }; -- cgit v1.2.3 From 1d19f7800d643b270b28d0a969c5eca455d54397 Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger Date: Wed, 15 May 2013 01:30:01 -0700 Subject: ib_srpt: Call target_sess_cmd_list_set_waiting during shutdown_session Given that srpt_release_channel_work() calls target_wait_for_sess_cmds() to allow outstanding se_cmd_t->cmd_kref a change to complete, the call to perform target_sess_cmd_list_set_waiting() needs to happen in srpt_shutdown_session() Also, this patch adds an explicit call to srpt_shutdown_session() within srpt_drain_channel() so that target_sess_cmd_list_set_waiting() will be called in the cases where TFO->shutdown_session() is not triggered directly by TCM. Cc: Joern Engel Cc: Roland Dreier Cc: stable@vger.kernel.org Signed-off-by: Nicholas Bellinger --- drivers/infiniband/ulp/srpt/ib_srpt.c | 32 ++++++++++++++++++++++++-------- drivers/infiniband/ulp/srpt/ib_srpt.h | 1 + 2 files changed, 25 insertions(+), 8 deletions(-) diff --git a/drivers/infiniband/ulp/srpt/ib_srpt.c b/drivers/infiniband/ulp/srpt/ib_srpt.c index 564024e0123a..3f3f0416fbdd 100644 --- a/drivers/infiniband/ulp/srpt/ib_srpt.c +++ b/drivers/infiniband/ulp/srpt/ib_srpt.c @@ -2226,6 +2226,27 @@ static void srpt_close_ch(struct srpt_rdma_ch *ch) spin_unlock_irq(&sdev->spinlock); } +/** + * srpt_shutdown_session() - Whether or not a session may be shut down. + */ +static int srpt_shutdown_session(struct se_session *se_sess) +{ + struct srpt_rdma_ch *ch = se_sess->fabric_sess_ptr; + unsigned long flags; + + spin_lock_irqsave(&ch->spinlock, flags); + if (ch->in_shutdown) { + spin_unlock_irqrestore(&ch->spinlock, flags); + return true; + } + + ch->in_shutdown = true; + target_sess_cmd_list_set_waiting(se_sess); + spin_unlock_irqrestore(&ch->spinlock, flags); + + return true; +} + /** * srpt_drain_channel() - Drain a channel by resetting the IB queue pair. * @cm_id: Pointer to the CM ID of the channel to be drained. @@ -2264,6 +2285,9 @@ static void srpt_drain_channel(struct ib_cm_id *cm_id) spin_unlock_irq(&sdev->spinlock); if (do_reset) { + if (ch->sess) + srpt_shutdown_session(ch->sess); + ret = srpt_ch_qp_err(ch); if (ret < 0) printk(KERN_ERR "Setting queue pair in error state" @@ -3466,14 +3490,6 @@ static void srpt_release_cmd(struct se_cmd *se_cmd) spin_unlock_irqrestore(&ch->spinlock, flags); } -/** - * srpt_shutdown_session() - Whether or not a session may be shut down. - */ -static int srpt_shutdown_session(struct se_session *se_sess) -{ - return true; -} - /** * srpt_close_session() - Forcibly close a session. * diff --git a/drivers/infiniband/ulp/srpt/ib_srpt.h b/drivers/infiniband/ulp/srpt/ib_srpt.h index 4caf55cda7b1..3dae156905de 100644 --- a/drivers/infiniband/ulp/srpt/ib_srpt.h +++ b/drivers/infiniband/ulp/srpt/ib_srpt.h @@ -325,6 +325,7 @@ struct srpt_rdma_ch { u8 sess_name[36]; struct work_struct release_work; struct completion *release_done; + bool in_shutdown; }; /** -- cgit v1.2.3 From 1e00227d4e8017ac9c3f73bf949a06c6e27f5122 Mon Sep 17 00:00:00 2001 From: David Howells Date: Tue, 28 May 2013 20:21:02 +0100 Subject: MN10300: Fix ret_from_kernel_thread ret_from_kernel_thread needs to set A2 to the thread_info pointer before jumping to syscall_exit. Without this, we never correctly start userspace. This was caused by the rejuggling of the fork/exec paths in commit ddf23e87a804 ("mn10300: switch to saner kernel_execve() semantics") Reported-by: Ken Cox Signed-off-by: David Howells Acked-by: Ken Cox Acked-by: Al Viro Signed-off-by: Linus Torvalds --- arch/mn10300/kernel/entry.S | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/mn10300/kernel/entry.S b/arch/mn10300/kernel/entry.S index 68fcab8f8f6f..942005753720 100644 --- a/arch/mn10300/kernel/entry.S +++ b/arch/mn10300/kernel/entry.S @@ -60,6 +60,7 @@ ENTRY(ret_from_kernel_thread) mov (REG_D0,fp),d0 mov (REG_A0,fp),a0 calls (a0) + GET_THREAD_INFO a2 # A2 must be set on return from sys_exit() clr d0 mov d0,(REG_D0,fp) jmp syscall_exit -- cgit v1.2.3 From d17fc238ac1486906ff724b4a5fe4ec169f554c5 Mon Sep 17 00:00:00 2001 From: David Howells Date: Tue, 28 May 2013 20:21:10 +0100 Subject: MN10300: Enable IRQs more in system call exit work path Enable IRQs when calling schedule() for TIF_NEED_RESCHED and do_notify_resume(). If interrupts are enabled during do_notify_resume(), a warning can be seen (see lower down). Whilst we're at it, resume_userspace can be made local to entry.S as it is not called outside of there and it can be merged with the part of work_resched that occurs after schedule() is called. WARNING: at kernel/softirq.c:160 local_bh_enable+0x42/0xa0() Call Trace: local_bh_enable+0x42/0xa0 unix_release_sock+0x86/0x23c unix_release+0x20/0x28 sock_release+0x17/0x88 sock_close+0x20/0x28 __fput+0xc9/0x1fc ____fput+0xb/0x10 task_work_run+0x64/0x78 do_notify_resume+0x53d/0x544 work_notifysig+0xa/0xc Signed-off-by: David Howells Acked-by: Ken Cox Signed-off-by: Linus Torvalds --- arch/mn10300/kernel/entry.S | 18 +++++------------- 1 file changed, 5 insertions(+), 13 deletions(-) diff --git a/arch/mn10300/kernel/entry.S b/arch/mn10300/kernel/entry.S index 942005753720..222152a3f751 100644 --- a/arch/mn10300/kernel/entry.S +++ b/arch/mn10300/kernel/entry.S @@ -108,10 +108,10 @@ syscall_exit_work: and EPSW_nSL,d0 beq resume_kernel # returning to supervisor mode - btst _TIF_SYSCALL_TRACE,d2 - beq work_pending LOCAL_IRQ_ENABLE # could let syscall_trace_exit() call # schedule() instead + btst _TIF_SYSCALL_TRACE,d2 + beq work_pending mov fp,d0 call syscall_trace_exit[],0 # do_syscall_trace(regs) jmp resume_userspace @@ -124,6 +124,7 @@ work_pending: work_resched: call schedule[],0 +resume_userspace: # make sure we don't miss an interrupt setting need_resched or # sigpending between sampling and the rti LOCAL_IRQ_DISABLE @@ -132,6 +133,8 @@ work_resched: mov (TI_flags,a2),d2 btst _TIF_WORK_MASK,d2 beq restore_all + + LOCAL_IRQ_ENABLE btst _TIF_NEED_RESCHED,d2 bne work_resched @@ -170,17 +173,6 @@ ret_from_intr: and EPSW_nSL,d0 beq resume_kernel # returning to supervisor mode -ENTRY(resume_userspace) - # make sure we don't miss an interrupt setting need_resched or - # sigpending between sampling and the rti - LOCAL_IRQ_DISABLE - - # is there any work to be done on int/exception return? - mov (TI_flags,a2),d2 - btst _TIF_WORK_MASK,d2 - bne work_pending - jmp restore_all - #ifdef CONFIG_PREEMPT ENTRY(resume_kernel) LOCAL_IRQ_DISABLE -- cgit v1.2.3 From b8bc9b0237873e814266566f84003d73799f170f Mon Sep 17 00:00:00 2001 From: David Howells Date: Tue, 28 May 2013 20:21:17 +0100 Subject: MN10300: ASB2305's PCI code needs the definition of XIRQ1 The code for PCI in the ASB2305 needs the definition of XIRQ1 from proc/irq.h otherwise the following error appears: arch/mn10300/unit-asb2305/pci.c: In function 'unit_pci_init': arch/mn10300/unit-asb2305/pci.c:481: error: 'XIRQ1' undeclared (first use in this function) arch/mn10300/unit-asb2305/pci.c:481: error: (Each undeclared identifier is reported only once arch/mn10300/unit-asb2305/pci.c:481: error: for each function it appears in.) Signed-off-by: David Howells Acked-by: Ken Cox Signed-off-by: Linus Torvalds --- arch/mn10300/unit-asb2305/pci.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/mn10300/unit-asb2305/pci.c b/arch/mn10300/unit-asb2305/pci.c index 1adcf024bb9a..e37fac0461f3 100644 --- a/arch/mn10300/unit-asb2305/pci.c +++ b/arch/mn10300/unit-asb2305/pci.c @@ -19,6 +19,7 @@ #include #include #include +#include #include "pci-asb2305.h" unsigned int pci_probe = 1; -- cgit v1.2.3 From 1aeeac7ad484e1bea6fe602880893b3074adb40a Mon Sep 17 00:00:00 2001 From: David Howells Date: Tue, 28 May 2013 20:21:25 +0100 Subject: MN10300: Need pci_iomap() and __pci_ioport_map() defining Include the generic definitions of pci_iomap() and __pci_ioport_map() otherwise we can get errors like: lib/pci_iomap.c: In function 'pci_iomap': lib/pci_iomap.c:37: error: implicit declaration of function '__pci_ioport_map' lib/pci_iomap.c:37: warning: return makes pointer from integer without a cast and: drivers/pci/quirks.c: In function 'disable_igfx_irq': drivers/pci/quirks.c:2893: error: implicit declaration of function 'pci_iomap' drivers/pci/quirks.c:2893: warning: initialization makes pointer from integer without a cast drivers/pci/quirks.c: In function 'reset_ivb_igd': drivers/pci/quirks.c:3133: warning: assignment makes pointer from integer without a cast Signed-off-by: David Howells Acked-by: Ken Cox Signed-off-by: Linus Torvalds --- arch/mn10300/include/asm/pci.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/mn10300/include/asm/pci.h b/arch/mn10300/include/asm/pci.h index 8137c25c4e15..6f31cc0f1a87 100644 --- a/arch/mn10300/include/asm/pci.h +++ b/arch/mn10300/include/asm/pci.h @@ -103,4 +103,6 @@ static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel) return channel ? 15 : 14; } +#include + #endif /* _ASM_PCI_H */ -- cgit v1.2.3 From 3f4d6364084ca0525591836eba4a59f04bb85c68 Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Wed, 8 May 2013 16:09:06 +0530 Subject: regulator: palmas: Fix incorrect condition Since 'id' cannot take two values at the same time, the condition should probably be an OR (||) instead of AND (&&). Introduced by commit 28d1e8cd67 ("regulator: palma: add ramp delay support through regulator constraints"). Signed-off-by: Sachin Kamat Signed-off-by: Mark Brown --- drivers/regulator/palmas-regulator.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/regulator/palmas-regulator.c b/drivers/regulator/palmas-regulator.c index 92ceed0fc65e..ced74167a600 100644 --- a/drivers/regulator/palmas-regulator.c +++ b/drivers/regulator/palmas-regulator.c @@ -840,7 +840,7 @@ static int palmas_regulators_probe(struct platform_device *pdev) break; } - if ((id == PALMAS_REG_SMPS6) && (id == PALMAS_REG_SMPS8)) + if ((id == PALMAS_REG_SMPS6) || (id == PALMAS_REG_SMPS8)) ramp_delay_support = true; if (ramp_delay_support) { -- cgit v1.2.3 From f232168df0c7e7414b70ac5d8fed83086d441c0b Mon Sep 17 00:00:00 2001 From: Kishon Vijay Abraham I Date: Thu, 30 May 2013 15:55:09 +0530 Subject: regulator: palmas: Fix "enable_reg" to point to the correct reg for SMPS10 regulator_enable_regmap() uses enable_reg to enable the regulator. But enable_reg for smps10 points to SMPS10_STATUS which is a read-only register. Fixed the same by having enable_reg set to SMPS10_CTRL. Signed-off-by: Kishon Vijay Abraham I Signed-off-by: Mark Brown Cc: stable@vger.kernel.org --- drivers/regulator/palmas-regulator.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/regulator/palmas-regulator.c b/drivers/regulator/palmas-regulator.c index ced74167a600..3ae44ac12a94 100644 --- a/drivers/regulator/palmas-regulator.c +++ b/drivers/regulator/palmas-regulator.c @@ -878,7 +878,7 @@ static int palmas_regulators_probe(struct platform_device *pdev) pmic->desc[id].vsel_mask = SMPS10_VSEL; pmic->desc[id].enable_reg = PALMAS_BASE_TO_REG(PALMAS_SMPS_BASE, - PALMAS_SMPS10_STATUS); + PALMAS_SMPS10_CTRL); pmic->desc[id].enable_mask = SMPS10_BOOST_EN; pmic->desc[id].min_uV = 3750000; pmic->desc[id].uV_step = 1250000; -- cgit v1.2.3 From 37448adfc7ce0d6d5892b87aa8d57edde4126f49 Mon Sep 17 00:00:00 2001 From: Lance Ortiz Date: Thu, 30 May 2013 08:25:12 -0600 Subject: aerdrv: Move cper_print_aer() call out of interrupt context The following warning was seen on 3.9 when a corrected PCIe error was being handled by the AER subsystem. WARNING: at .../drivers/pci/search.c:214 pci_get_dev_by_id+0x8a/0x90() This occurred because a call to pci_get_domain_bus_and_slot() was added to cper_print_pcie() to setup for the call to cper_print_aer(). The warning showed up because cper_print_pcie() is called in an interrupt context and pci_get* functions are not supposed to be called in that context. The solution is to move the cper_print_aer() call out of the interrupt context and into aer_recover_work_func() to avoid any warnings when calling pci_get* functions. Signed-off-by: Lance Ortiz Acked-by: Borislav Petkov Acked-by: Rafael J. Wysocki Signed-off-by: Tony Luck --- drivers/acpi/apei/cper.c | 18 ------------------ drivers/acpi/apei/ghes.c | 4 +++- drivers/pci/pcie/aer/aerdrv_core.c | 5 ++++- drivers/pci/pcie/aer/aerdrv_errprint.c | 4 ++-- include/linux/aer.h | 5 +++-- 5 files changed, 12 insertions(+), 24 deletions(-) diff --git a/drivers/acpi/apei/cper.c b/drivers/acpi/apei/cper.c index fefc2ca7cc3e..33dc6a004802 100644 --- a/drivers/acpi/apei/cper.c +++ b/drivers/acpi/apei/cper.c @@ -250,10 +250,6 @@ static const char *cper_pcie_port_type_strs[] = { static void cper_print_pcie(const char *pfx, const struct cper_sec_pcie *pcie, const struct acpi_hest_generic_data *gdata) { -#ifdef CONFIG_ACPI_APEI_PCIEAER - struct pci_dev *dev; -#endif - if (pcie->validation_bits & CPER_PCIE_VALID_PORT_TYPE) printk("%s""port_type: %d, %s\n", pfx, pcie->port_type, pcie->port_type < ARRAY_SIZE(cper_pcie_port_type_strs) ? @@ -285,20 +281,6 @@ static void cper_print_pcie(const char *pfx, const struct cper_sec_pcie *pcie, printk( "%s""bridge: secondary_status: 0x%04x, control: 0x%04x\n", pfx, pcie->bridge.secondary_status, pcie->bridge.control); -#ifdef CONFIG_ACPI_APEI_PCIEAER - dev = pci_get_domain_bus_and_slot(pcie->device_id.segment, - pcie->device_id.bus, pcie->device_id.function); - if (!dev) { - pr_err("PCI AER Cannot get PCI device %04x:%02x:%02x.%d\n", - pcie->device_id.segment, pcie->device_id.bus, - pcie->device_id.slot, pcie->device_id.function); - return; - } - if (pcie->validation_bits & CPER_PCIE_VALID_AER_INFO) - cper_print_aer(pfx, dev, gdata->error_severity, - (struct aer_capability_regs *) pcie->aer_info); - pci_dev_put(dev); -#endif } static const char *apei_estatus_section_flag_strs[] = { diff --git a/drivers/acpi/apei/ghes.c b/drivers/acpi/apei/ghes.c index d668a8ae602b..403baf4dffc1 100644 --- a/drivers/acpi/apei/ghes.c +++ b/drivers/acpi/apei/ghes.c @@ -454,7 +454,9 @@ static void ghes_do_proc(struct ghes *ghes, aer_severity = cper_severity_to_aer(sev); aer_recover_queue(pcie_err->device_id.segment, pcie_err->device_id.bus, - devfn, aer_severity); + devfn, aer_severity, + (struct aer_capability_regs *) + pcie_err->aer_info); } } diff --git a/drivers/pci/pcie/aer/aerdrv_core.c b/drivers/pci/pcie/aer/aerdrv_core.c index 8ec8b4f48560..0f4554e48cc5 100644 --- a/drivers/pci/pcie/aer/aerdrv_core.c +++ b/drivers/pci/pcie/aer/aerdrv_core.c @@ -580,6 +580,7 @@ struct aer_recover_entry u8 devfn; u16 domain; int severity; + struct aer_capability_regs *regs; }; static DEFINE_KFIFO(aer_recover_ring, struct aer_recover_entry, @@ -593,7 +594,7 @@ static DEFINE_SPINLOCK(aer_recover_ring_lock); static DECLARE_WORK(aer_recover_work, aer_recover_work_func); void aer_recover_queue(int domain, unsigned int bus, unsigned int devfn, - int severity) + int severity, struct aer_capability_regs *aer_regs) { unsigned long flags; struct aer_recover_entry entry = { @@ -601,6 +602,7 @@ void aer_recover_queue(int domain, unsigned int bus, unsigned int devfn, .devfn = devfn, .domain = domain, .severity = severity, + .regs = aer_regs, }; spin_lock_irqsave(&aer_recover_ring_lock, flags); @@ -627,6 +629,7 @@ static void aer_recover_work_func(struct work_struct *work) PCI_SLOT(entry.devfn), PCI_FUNC(entry.devfn)); continue; } + cper_print_aer(pdev, entry.severity, entry.regs); do_recovery(pdev, entry.severity); pci_dev_put(pdev); } diff --git a/drivers/pci/pcie/aer/aerdrv_errprint.c b/drivers/pci/pcie/aer/aerdrv_errprint.c index 5ab14251839d..2c7c9f5f592c 100644 --- a/drivers/pci/pcie/aer/aerdrv_errprint.c +++ b/drivers/pci/pcie/aer/aerdrv_errprint.c @@ -220,7 +220,7 @@ int cper_severity_to_aer(int cper_severity) } EXPORT_SYMBOL_GPL(cper_severity_to_aer); -void cper_print_aer(const char *prefix, struct pci_dev *dev, int cper_severity, +void cper_print_aer(struct pci_dev *dev, int cper_severity, struct aer_capability_regs *aer) { int aer_severity, layer, agent, status_strs_size, tlp_header_valid = 0; @@ -244,7 +244,7 @@ void cper_print_aer(const char *prefix, struct pci_dev *dev, int cper_severity, agent = AER_GET_AGENT(aer_severity, status); dev_err(&dev->dev, "aer_status: 0x%08x, aer_mask: 0x%08x\n", status, mask); - cper_print_bits(prefix, status, status_strs, status_strs_size); + cper_print_bits("", status, status_strs, status_strs_size); dev_err(&dev->dev, "aer_layer=%s, aer_agent=%s\n", aer_error_layer[layer], aer_agent_string[agent]); if (aer_severity != AER_CORRECTABLE) diff --git a/include/linux/aer.h b/include/linux/aer.h index ec10e1b24c1c..737f90ab4b62 100644 --- a/include/linux/aer.h +++ b/include/linux/aer.h @@ -49,10 +49,11 @@ static inline int pci_cleanup_aer_uncorrect_error_status(struct pci_dev *dev) } #endif -extern void cper_print_aer(const char *prefix, struct pci_dev *dev, +extern void cper_print_aer(struct pci_dev *dev, int cper_severity, struct aer_capability_regs *aer); extern int cper_severity_to_aer(int cper_severity); extern void aer_recover_queue(int domain, unsigned int bus, unsigned int devfn, - int severity); + int severity, + struct aer_capability_regs *aer_regs); #endif //_AER_H_ -- cgit v1.2.3 From eb54d43707c69340581940e1fcaecb4d7d17b814 Mon Sep 17 00:00:00 2001 From: Chuck Lever Date: Tue, 14 May 2013 14:37:56 -0400 Subject: NFS: Fix security flavor negotiation with legacy binary mounts Darrick J. Wong reports: > I have a kvm-based testing setup that netboots VMs over NFS, the > client end of which seems to have broken somehow in 3.10-rc1. The > server's exports file looks like this: > > /storage/mtr/x64 192.168.122.0/24(ro,sync,no_root_squash,no_subtree_check) > > On the client end (inside the VM), the initrd runs the following > command to try to mount the rootfs over NFS: > > # mount -o nolock -o ro -o retrans=10 192.168.122.1:/storage/mtr/x64/ /root > > (Note: This is the busybox mount command.) > > The mount fails with -EINVAL. Commit 4580a92d44 "NFS: Use server-recommended security flavor by default (NFSv3)" introduced a behavior regression for NFS mounts done via a legacy binary mount(2) call. Ensure that a default security flavor is specified for legacy binary mount requests, since they do not invoke nfs_select_flavor() in the kernel. Busybox uses klibc's nfsmount command, which performs NFS mounts using the legacy binary mount data format. /sbin/mount.nfs is not affected by this regression. Reported-by: Darrick J. Wong Signed-off-by: Chuck Lever Tested-by: Darrick J. Wong Acked-by: Weston Andros Adamson Signed-off-by: Trond Myklebust --- fs/nfs/super.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/fs/nfs/super.c b/fs/nfs/super.c index a366107a7331..2d7525fbcf25 100644 --- a/fs/nfs/super.c +++ b/fs/nfs/super.c @@ -1942,6 +1942,7 @@ static int nfs23_validate_mount_data(void *options, args->namlen = data->namlen; args->bsize = data->bsize; + args->auth_flavors[0] = RPC_AUTH_UNIX; if (data->flags & NFS_MOUNT_SECFLAVOUR) args->auth_flavors[0] = data->pseudoflavor; if (!args->nfs_server.hostname) @@ -2637,6 +2638,7 @@ static int nfs4_validate_mount_data(void *options, goto out_no_address; args->nfs_server.port = ntohs(((struct sockaddr_in *)sap)->sin_port); + args->auth_flavors[0] = RPC_AUTH_UNIX; if (data->auth_flavourlen) { if (data->auth_flavourlen > 1) goto out_inval_auth; -- cgit v1.2.3 From 5489e948dc0f41a249c109d74612bf5aceab8f38 Mon Sep 17 00:00:00 2001 From: Jean-Christophe PLAGNIOL-VILLARD Date: Thu, 30 May 2013 22:23:44 +0200 Subject: MAINTAINERS: Framebuffer Layer maintainers update Tomi and I will now take care of the Framebuffer Layer The git tree is now on kernel.org Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD Cc: Tomi Valkeinen Cc: Olof Johansson Cc: Andrew Morton Cc: Arnd Bergmann Cc: Florian Tobias Schandinat Cc: linux-fbdev@vger.kernel.org Signed-off-by: Linus Torvalds --- MAINTAINERS | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index fd3a495a0005..7714c3c363c3 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3322,11 +3322,12 @@ F: drivers/net/wan/dlci.c F: drivers/net/wan/sdla.c FRAMEBUFFER LAYER -M: Florian Tobias Schandinat +M: Jean-Christophe Plagniol-Villard +M: Tomi Valkeinen L: linux-fbdev@vger.kernel.org W: http://linux-fbdev.sourceforge.net/ Q: http://patchwork.kernel.org/project/linux-fbdev/list/ -T: git git://github.com/schandinat/linux-2.6.git fbdev-next +T: git git://git.kernel.org/pub/scm/linux/kernel/git/plagnioj/linux-fbdev.git S: Maintained F: Documentation/fb/ F: Documentation/devicetree/bindings/fb/ -- cgit v1.2.3 From 08fb39051f5581df45ae2a20c6cf2d0c4cddf7c2 Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Tue, 21 May 2013 18:02:00 +1000 Subject: xfs: avoid nesting transactions in xfs_qm_scall_setqlim() Lockdep reports: ============================================= [ INFO: possible recursive locking detected ] 3.9.0+ #3 Not tainted --------------------------------------------- setquota/28368 is trying to acquire lock: (sb_internal){++++.?}, at: [] xfs_trans_alloc+0x26/0x50 but task is already holding lock: (sb_internal){++++.?}, at: [] xfs_trans_alloc+0x26/0x50 from xfs_qm_scall_setqlim()->xfs_dqread() when a dquot needs to be allocated. xfs_qm_scall_setqlim() is starting a transaction and then not passing it into xfs_qm_dqet() and so it starts it's own transaction when allocating the dquot. Splat! Fix this by not allocating the dquot in xfs_qm_scall_setqlim() inside the setqlim transaction. This requires getting the dquot first (and allocating it if necessary) then dropping and relocking the dquot before joining it to the setqlim transaction. Reported-by: Michael L. Semon Signed-off-by: Dave Chinner Reviewed-by: Ben Myers Signed-off-by: Ben Myers (cherry picked from commit f648167f3ac79018c210112508c732ea9bf67c7b) --- fs/xfs/xfs_qm_syscalls.c | 40 +++++++++++++++++++++++----------------- 1 file changed, 23 insertions(+), 17 deletions(-) diff --git a/fs/xfs/xfs_qm_syscalls.c b/fs/xfs/xfs_qm_syscalls.c index c41190cad6e9..6cdf6ffc36a1 100644 --- a/fs/xfs/xfs_qm_syscalls.c +++ b/fs/xfs/xfs_qm_syscalls.c @@ -489,31 +489,36 @@ xfs_qm_scall_setqlim( if ((newlim->d_fieldmask & XFS_DQ_MASK) == 0) return 0; - tp = xfs_trans_alloc(mp, XFS_TRANS_QM_SETQLIM); - error = xfs_trans_reserve(tp, 0, XFS_QM_SETQLIM_LOG_RES(mp), - 0, 0, XFS_DEFAULT_LOG_COUNT); - if (error) { - xfs_trans_cancel(tp, 0); - return (error); - } - /* * We don't want to race with a quotaoff so take the quotaoff lock. - * (We don't hold an inode lock, so there's nothing else to stop - * a quotaoff from happening). (XXXThis doesn't currently happen - * because we take the vfslock before calling xfs_qm_sysent). + * We don't hold an inode lock, so there's nothing else to stop + * a quotaoff from happening. */ mutex_lock(&q->qi_quotaofflock); /* - * Get the dquot (locked), and join it to the transaction. - * Allocate the dquot if this doesn't exist. + * Get the dquot (locked) before we start, as we need to do a + * transaction to allocate it if it doesn't exist. Once we have the + * dquot, unlock it so we can start the next transaction safely. We hold + * a reference to the dquot, so it's safe to do this unlock/lock without + * it being reclaimed in the mean time. */ - if ((error = xfs_qm_dqget(mp, NULL, id, type, XFS_QMOPT_DQALLOC, &dqp))) { - xfs_trans_cancel(tp, XFS_TRANS_ABORT); + error = xfs_qm_dqget(mp, NULL, id, type, XFS_QMOPT_DQALLOC, &dqp); + if (error) { ASSERT(error != ENOENT); goto out_unlock; } + xfs_dqunlock(dqp); + + tp = xfs_trans_alloc(mp, XFS_TRANS_QM_SETQLIM); + error = xfs_trans_reserve(tp, 0, XFS_QM_SETQLIM_LOG_RES(mp), + 0, 0, XFS_DEFAULT_LOG_COUNT); + if (error) { + xfs_trans_cancel(tp, 0); + goto out_rele; + } + + xfs_dqlock(dqp); xfs_trans_dqjoin(tp, dqp); ddq = &dqp->q_core; @@ -621,9 +626,10 @@ xfs_qm_scall_setqlim( xfs_trans_log_dquot(tp, dqp); error = xfs_trans_commit(tp, 0); - xfs_qm_dqrele(dqp); - out_unlock: +out_rele: + xfs_qm_dqrele(dqp); +out_unlock: mutex_unlock(&q->qi_quotaofflock); return error; } -- cgit v1.2.3 From 2962f5a5dcc56f69cbf62121a7be67cc15d6940b Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Mon, 27 May 2013 16:38:25 +1000 Subject: xfs: kill suid/sgid through the truncate path. XFS has failed to kill suid/sgid bits correctly when truncating files of non-zero size since commit c4ed4243 ("xfs: split xfs_setattr") introduced in the 3.1 kernel. Fix it. Fix it. cc: stable kernel Signed-off-by: Dave Chinner Reviewed-by: Brian Foster Signed-off-by: Ben Myers (cherry picked from commit 56c19e89b38618390addfc743d822f99519055c6) --- fs/xfs/xfs_iops.c | 47 ++++++++++++++++++++++++++++++++--------------- 1 file changed, 32 insertions(+), 15 deletions(-) diff --git a/fs/xfs/xfs_iops.c b/fs/xfs/xfs_iops.c index d82efaa2ac73..ca9ecaa81112 100644 --- a/fs/xfs/xfs_iops.c +++ b/fs/xfs/xfs_iops.c @@ -455,6 +455,28 @@ xfs_vn_getattr( return 0; } +static void +xfs_setattr_mode( + struct xfs_trans *tp, + struct xfs_inode *ip, + struct iattr *iattr) +{ + struct inode *inode = VFS_I(ip); + umode_t mode = iattr->ia_mode; + + ASSERT(tp); + ASSERT(xfs_isilocked(ip, XFS_ILOCK_EXCL)); + + if (!in_group_p(inode->i_gid) && !capable(CAP_FSETID)) + mode &= ~S_ISGID; + + ip->i_d.di_mode &= S_IFMT; + ip->i_d.di_mode |= mode & ~S_IFMT; + + inode->i_mode &= S_IFMT; + inode->i_mode |= mode & ~S_IFMT; +} + int xfs_setattr_nonsize( struct xfs_inode *ip, @@ -606,18 +628,8 @@ xfs_setattr_nonsize( /* * Change file access modes. */ - if (mask & ATTR_MODE) { - umode_t mode = iattr->ia_mode; - - if (!in_group_p(inode->i_gid) && !capable(CAP_FSETID)) - mode &= ~S_ISGID; - - ip->i_d.di_mode &= S_IFMT; - ip->i_d.di_mode |= mode & ~S_IFMT; - - inode->i_mode &= S_IFMT; - inode->i_mode |= mode & ~S_IFMT; - } + if (mask & ATTR_MODE) + xfs_setattr_mode(tp, ip, iattr); /* * Change file access or modified times. @@ -714,9 +726,8 @@ xfs_setattr_size( return XFS_ERROR(error); ASSERT(S_ISREG(ip->i_d.di_mode)); - ASSERT((mask & (ATTR_MODE|ATTR_UID|ATTR_GID|ATTR_ATIME|ATTR_ATIME_SET| - ATTR_MTIME_SET|ATTR_KILL_SUID|ATTR_KILL_SGID| - ATTR_KILL_PRIV|ATTR_TIMES_SET)) == 0); + ASSERT((mask & (ATTR_UID|ATTR_GID|ATTR_ATIME|ATTR_ATIME_SET| + ATTR_MTIME_SET|ATTR_KILL_PRIV|ATTR_TIMES_SET)) == 0); if (!(flags & XFS_ATTR_NOLOCK)) { lock_flags |= XFS_IOLOCK_EXCL; @@ -860,6 +871,12 @@ xfs_setattr_size( xfs_inode_clear_eofblocks_tag(ip); } + /* + * Change file access modes. + */ + if (mask & ATTR_MODE) + xfs_setattr_mode(tp, ip, iattr); + if (mask & ATTR_CTIME) { inode->i_ctime = iattr->ia_ctime; ip->i_d.di_ctime.t_sec = iattr->ia_ctime.tv_sec; -- cgit v1.2.3 From 7d2ffe80aa000a149246b3745968634192eb5358 Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Mon, 27 May 2013 16:38:23 +1000 Subject: xfs: fix split buffer vector log recovery support A long time ago in a galaxy far away.... .. the was a commit made to fix some ilinux specific "fragmented buffer" log recovery problem: http://oss.sgi.com/cgi-bin/gitweb.cgi?p=archive/xfs-import.git;a=commitdiff;h=b29c0bece51da72fb3ff3b61391a391ea54e1603 That problem occurred when a contiguous dirty region of a buffer was split across across two pages of an unmapped buffer. It's been a long time since that has been done in XFS, and the changes to log the entire inode buffers for CRC enabled filesystems has re-introduced that corner case. And, of course, it turns out that the above commit didn't actually fix anything - it just ensured that log recovery is guaranteed to fail when this situation occurs. And now for the gory details. xfstest xfs/085 is failing with this assert: XFS (vdb): bad number of regions (0) in inode log format XFS: Assertion failed: 0, file: fs/xfs/xfs_log_recover.c, line: 1583 Largely undocumented factoid #1: Log recovery depends on all log buffer format items starting with this format: struct foo_log_format { __uint16_t type; __uint16_t size; .... As recoery uses the size field and assumptions about 32 bit alignment in decoding format items. So don't pay much attention to the fact log recovery thinks that it decoding an inode log format item - it just uses them to determine what the size of the item is. But why would it see a log format item with a zero size? Well, luckily enough xfs_logprint uses the same code and gives the same error, so with a bit of gdb magic, it turns out that it isn't a log format that is being decoded. What logprint tells us is this: Oper (130): tid: a0375e1a len: 28 clientid: TRANS flags: none BUF: #regs: 2 start blkno: 144 (0x90) len: 16 bmap size: 2 flags: 0x4000 Oper (131): tid: a0375e1a len: 4096 clientid: TRANS flags: none BUF DATA ---------------------------------------------------------------------------- Oper (132): tid: a0375e1a len: 4096 clientid: TRANS flags: none xfs_logprint: unknown log operation type (4e49) ********************************************************************** * ERROR: data block=2 * ********************************************************************** That we've got a buffer format item (oper 130) that has two regions; the format item itself and one dirty region. The subsequent region after the buffer format item and it's data is them what we are tripping over, and the first bytes of it at an inode magic number. Not a log opheader like there is supposed to be. That means there's a problem with the buffer format item. It's dirty data region is 4096 bytes, and it contains - you guessed it - initialised inodes. But inode buffers are 8k, not 4k, and we log them in their entirety. So something is wrong here. The buffer format item contains: (gdb) p /x *(struct xfs_buf_log_format *)in_f $22 = {blf_type = 0x123c, blf_size = 0x2, blf_flags = 0x4000, blf_len = 0x10, blf_blkno = 0x90, blf_map_size = 0x2, blf_data_map = {0xffffffff, 0xffffffff, .... }} Two regions, and a signle dirty contiguous region of 64 bits. 64 * 128 = 8k, so this should be followed by a single 8k region of data. And the blf_flags tell us that the type of buffer is a XFS_BLFT_DINO_BUF. It contains inodes. And because it doesn't have the XFS_BLF_INODE_BUF flag set, that means it's an inode allocation buffer. So, it should be followed by 8k of inode data. But we know that the next region has a header of: (gdb) p /x *ohead $25 = {oh_tid = 0x1a5e37a0, oh_len = 0x100000, oh_clientid = 0x69, oh_flags = 0x0, oh_res2 = 0x0} and so be32_to_cpu(oh_len) = 0x1000 = 4096 bytes. It's simply not long enough to hold all the logged data. There must be another region. There is - there's a following opheader for another 4k of data that contains the other half of the inode cluster data - the one we assert fail on because it's not a log format header. So why is the second part of the data not being accounted to the correct buffer log format structure? It took a little more work with gdb to work out that the buffer log format structure was both expecting it to be there but hadn't accounted for it. It was at that point I went to the kernel code, as clearly this wasn't a bug in xfs_logprint and the kernel was writing bad stuff to the log. First port of call was the buffer item formatting code, and the discontiguous memory/contiguous dirty region handling code immediately stood out. I've wondered for a long time why the code had this comment in it: vecp->i_addr = xfs_buf_offset(bp, buffer_offset); vecp->i_len = nbits * XFS_BLF_CHUNK; vecp->i_type = XLOG_REG_TYPE_BCHUNK; /* * You would think we need to bump the nvecs here too, but we do not * this number is used by recovery, and it gets confused by the boundary * split here * nvecs++; */ vecp++; And it didn't account for the extra vector pointer. The case being handled here is that a contiguous dirty region lies across a boundary that cannot be memcpy()d across, and so has to be split into two separate operations for xlog_write() to perform. What this code assumes is that what is written to the log is two consecutive blocks of data that are accounted in the buf log format item as the same contiguous dirty region and so will get decoded as such by the log recovery code. The thing is, xlog_write() knows nothing about this, and so just does it's normal thing of adding an opheader for each vector. That means the 8k region gets written to the log as two separate regions of 4k each, but because nvecs has not been incremented, the buf log format item accounts for only one of them. Hence when we come to log recovery, we process the first 4k region and then expect to come across a new item that starts with a log format structure of some kind that tells us whenteh next data is going to be. Instead, we hit raw buffer data and things go bad real quick. So, the commit from 2002 that commented out nvecs++ is just plain wrong. It breaks log recovery completely, and it would seem the only reason this hasn't been since then is that we don't log large contigous regions of multi-page unmapped buffers very often. Never would be a closer estimate, at least until the CRC code came along.... So, lets fix that by restoring the nvecs accounting for the extra region when we hit this case..... .... and there's the problemin log recovery it is apparently working around: XFS: Assertion failed: i == item->ri_total, file: fs/xfs/xfs_log_recover.c, line: 2135 Yup, xlog_recover_do_reg_buffer() doesn't handle contigous dirty regions being broken up into multiple regions by the log formatting code. That's an easy fix, though - if the number of contiguous dirty bits exceeds the length of the region being copied out of the log, only account for the number of dirty bits that region covers, and then loop again and copy more from the next region. It's a 2 line fix. Now xfstests xfs/085 passes, we have one less piece of mystery code, and one more important piece of knowledge about how to structure new log format items.. Signed-off-by: Dave Chinner Reviewed-by: Mark Tinguely Signed-off-by: Ben Myers (cherry picked from commit 709da6a61aaf12181a8eea8443919ae5fc1b731d) --- fs/xfs/xfs_buf_item.c | 7 +------ fs/xfs/xfs_log_recover.c | 11 +++++++++++ 2 files changed, 12 insertions(+), 6 deletions(-) diff --git a/fs/xfs/xfs_buf_item.c b/fs/xfs/xfs_buf_item.c index cf263476d6b4..4ec431777048 100644 --- a/fs/xfs/xfs_buf_item.c +++ b/fs/xfs/xfs_buf_item.c @@ -262,12 +262,7 @@ xfs_buf_item_format_segment( vecp->i_addr = xfs_buf_offset(bp, buffer_offset); vecp->i_len = nbits * XFS_BLF_CHUNK; vecp->i_type = XLOG_REG_TYPE_BCHUNK; -/* - * You would think we need to bump the nvecs here too, but we do not - * this number is used by recovery, and it gets confused by the boundary - * split here - * nvecs++; - */ + nvecs++; vecp++; first_bit = next_bit; last_bit = next_bit; diff --git a/fs/xfs/xfs_log_recover.c b/fs/xfs/xfs_log_recover.c index 93f03ec17eec..d9e4d3c3991a 100644 --- a/fs/xfs/xfs_log_recover.c +++ b/fs/xfs/xfs_log_recover.c @@ -2096,6 +2096,17 @@ xlog_recover_do_reg_buffer( ASSERT(BBTOB(bp->b_io_length) >= ((uint)bit << XFS_BLF_SHIFT) + (nbits << XFS_BLF_SHIFT)); + /* + * The dirty regions logged in the buffer, even though + * contiguous, may span multiple chunks. This is because the + * dirty region may span a physical page boundary in a buffer + * and hence be split into two separate vectors for writing into + * the log. Hence we need to trim nbits back to the length of + * the current region being copied out of the log. + */ + if (item->ri_buf[i].i_len < (nbits << XFS_BLF_SHIFT)) + nbits = item->ri_buf[i].i_len >> XFS_BLF_SHIFT; + /* * Do a sanity check if this is a dquot buffer. Just checking * the first dquot in the buffer should do. XXXThis is -- cgit v1.2.3 From 1de09d1ae48152e56399aba0bfd984fb0ddae6b0 Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Mon, 27 May 2013 16:38:20 +1000 Subject: xfs: fix incorrect remote symlink block count When CRCs are enabled, the number of blocks needed to hold a remote symlink on a 1k block size filesystem may be 2 instead of 1. The transaction reservation for the allocated blocks was not taking this into account and only allocating one block. Hence when trying to read or invalidate such symlinks, we are mapping a hole where there should be a block and things go bad at that point. Fix the reservation to use the correct block count, clean up the block count calculation similar to the remote attribute calculation, and add a debug guard to detect when we don't write the entire symlink to disk. Signed-off-by: Dave Chinner Reviewed-by: Ben Myers Reviewed-by: Brian Foster Signed-off-by: Ben Myers (cherry picked from commit 321a95839e65db3759a07a3655184b0283af90fe) --- fs/xfs/xfs_symlink.c | 20 ++++++-------------- 1 file changed, 6 insertions(+), 14 deletions(-) diff --git a/fs/xfs/xfs_symlink.c b/fs/xfs/xfs_symlink.c index 5f234389327c..195a403e1522 100644 --- a/fs/xfs/xfs_symlink.c +++ b/fs/xfs/xfs_symlink.c @@ -56,16 +56,9 @@ xfs_symlink_blocks( struct xfs_mount *mp, int pathlen) { - int fsblocks = 0; - int len = pathlen; + int buflen = XFS_SYMLINK_BUF_SPACE(mp, mp->m_sb.sb_blocksize); - do { - fsblocks++; - len -= XFS_SYMLINK_BUF_SPACE(mp, mp->m_sb.sb_blocksize); - } while (len > 0); - - ASSERT(fsblocks <= XFS_SYMLINK_MAPS); - return fsblocks; + return (pathlen + buflen - 1) / buflen; } static int @@ -405,7 +398,7 @@ xfs_symlink( if (pathlen <= XFS_LITINO(mp, dp->i_d.di_version)) fs_blocks = 0; else - fs_blocks = XFS_B_TO_FSB(mp, pathlen); + fs_blocks = xfs_symlink_blocks(mp, pathlen); resblks = XFS_SYMLINK_SPACE_RES(mp, link_name->len, fs_blocks); error = xfs_trans_reserve(tp, resblks, XFS_SYMLINK_LOG_RES(mp), 0, XFS_TRANS_PERM_LOG_RES, XFS_SYMLINK_LOG_COUNT); @@ -512,7 +505,7 @@ xfs_symlink( cur_chunk = target_path; offset = 0; for (n = 0; n < nmaps; n++) { - char *buf; + char *buf; d = XFS_FSB_TO_DADDR(mp, mval[n].br_startblock); byte_cnt = XFS_FSB_TO_B(mp, mval[n].br_blockcount); @@ -525,9 +518,7 @@ xfs_symlink( bp->b_ops = &xfs_symlink_buf_ops; byte_cnt = XFS_SYMLINK_BUF_SPACE(mp, byte_cnt); - if (pathlen < byte_cnt) { - byte_cnt = pathlen; - } + byte_cnt = min(byte_cnt, pathlen); buf = bp->b_addr; buf += xfs_symlink_hdr_set(mp, ip->i_ino, offset, @@ -542,6 +533,7 @@ xfs_symlink( xfs_trans_log_buf(tp, bp, 0, (buf + byte_cnt - 1) - (char *)bp->b_addr); } + ASSERT(pathlen == 0); } /* -- cgit v1.2.3 From e7927e879d12d27aa06b9bbed57cc32dcd7d17fd Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Mon, 27 May 2013 16:38:26 +1000 Subject: xfs: add fsgeom flag for v5 superblock support. Currently userspace has no way of determining that a filesystem is CRC enabled. Add a flag to the XFS_IOC_FSGEOMETRY ioctl output to indicate that the filesystem has v5 superblock support enabled. This will allow xfs_info to correctly report the state of the filesystem. Signed-off-by: Dave Chinner Reviewed-by: Eric Sandeen Reviewed-by: Brian Foster Signed-off-by: Ben Myers (cherry picked from commit 74137fff067961c9aca1e14d073805c3de8549bd) --- fs/xfs/xfs_fs.h | 1 + fs/xfs/xfs_fsops.c | 4 +++- 2 files changed, 4 insertions(+), 1 deletion(-) diff --git a/fs/xfs/xfs_fs.h b/fs/xfs/xfs_fs.h index 6dda3f949b04..d04695545397 100644 --- a/fs/xfs/xfs_fs.h +++ b/fs/xfs/xfs_fs.h @@ -236,6 +236,7 @@ typedef struct xfs_fsop_resblks { #define XFS_FSOP_GEOM_FLAGS_PROJID32 0x0800 /* 32-bit project IDs */ #define XFS_FSOP_GEOM_FLAGS_DIRV2CI 0x1000 /* ASCII only CI names */ #define XFS_FSOP_GEOM_FLAGS_LAZYSB 0x4000 /* lazy superblock counters */ +#define XFS_FSOP_GEOM_FLAGS_V5SB 0x8000 /* version 5 superblock */ /* diff --git a/fs/xfs/xfs_fsops.c b/fs/xfs/xfs_fsops.c index 87595b211da1..3c3644ea825b 100644 --- a/fs/xfs/xfs_fsops.c +++ b/fs/xfs/xfs_fsops.c @@ -99,7 +99,9 @@ xfs_fs_geometry( (xfs_sb_version_hasattr2(&mp->m_sb) ? XFS_FSOP_GEOM_FLAGS_ATTR2 : 0) | (xfs_sb_version_hasprojid32bit(&mp->m_sb) ? - XFS_FSOP_GEOM_FLAGS_PROJID32 : 0); + XFS_FSOP_GEOM_FLAGS_PROJID32 : 0) | + (xfs_sb_version_hascrc(&mp->m_sb) ? + XFS_FSOP_GEOM_FLAGS_V5SB : 0); geo->logsectsize = xfs_sb_version_hassector(&mp->m_sb) ? mp->m_sb.sb_logsectsize : BBSIZE; geo->rtsectsize = mp->m_sb.sb_blocksize; -- cgit v1.2.3 From 7c9950fd2ac97431230544142d5e652e1b948372 Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Mon, 27 May 2013 16:38:24 +1000 Subject: xfs: disable swap extents ioctl on CRC enabled filesystems Currently, swapping extents from one inode to another is a simple act of switching data and attribute forks from one inode to another. This, unfortunately in no longer so simple with CRC enabled filesystems as there is owner information embedded into the BMBT blocks that are swapped between inodes. Hence swapping the forks between inodes results in the inodes having mapping blocks that point to the wrong owner and hence are considered corrupt. To fix this we need an extent tree block or record based swap algorithm so that the BMBT block owner information can be updated atomically in the swap transaction. This is a significant piece of new work, so for the moment simply don't allow swap extent operations to succeed on CRC enabled filesystems. Signed-off-by: Dave Chinner Reviewed-by: Ben Myers Reviewed-by: Brian Foster Signed-off-by: Ben Myers (cherry picked from commit 02f75405a75eadfb072609f6bf839e027de6a29a) --- fs/xfs/xfs_dfrag.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/fs/xfs/xfs_dfrag.c b/fs/xfs/xfs_dfrag.c index f852b082a084..c407e1ccff43 100644 --- a/fs/xfs/xfs_dfrag.c +++ b/fs/xfs/xfs_dfrag.c @@ -219,6 +219,14 @@ xfs_swap_extents( int taforkblks = 0; __uint64_t tmp; + /* + * We have no way of updating owner information in the BMBT blocks for + * each inode on CRC enabled filesystems, so to avoid corrupting the + * this metadata we simply don't allow extent swaps to occur. + */ + if (xfs_sb_version_hascrc(&mp->m_sb)) + return XFS_ERROR(EINVAL); + tempifp = kmem_alloc(sizeof(xfs_ifork_t), KM_MAYFAIL); if (!tempifp) { error = XFS_ERROR(ENOMEM); -- cgit v1.2.3 From e400d27d1690d609f203f2d7d8efebc98cbc3089 Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Tue, 28 May 2013 18:37:17 +1000 Subject: xfs: fix dir3 freespace block corruption When the directory freespace index grows to a second block (2017 4k data blocks in the directory), the initialisation of the second new block header goes wrong. The write verifier fires a corruption error indicating that the block number in the header is zero. This was being tripped by xfs/110. The problem is that the initialisation of the new block is done just fine in xfs_dir3_free_get_buf(), but the caller then users a dirv2 structure to zero on-disk header fields that xfs_dir3_free_get_buf() has already zeroed. These lined up with the block number in the dir v3 header format. While looking at this, I noticed that the struct xfs_dir3_free_hdr() had 4 bytes of padding in it that wasn't defined as padding or being zeroed by the initialisation. Add a pad field declaration and fully zero the on disk and in-core headers in xfs_dir3_free_get_buf() so that this is never an issue in the future. Note that this doesn't change the on-disk layout, just makes the 32 bits of padding in the layout explicit. Signed-off-by: Dave Chinner Reviewed-by: Ben Myers Signed-off-by: Ben Myers (cherry picked from commit 5ae6e6a401957698f2bd8c9f4a86d86d02199fea) --- fs/xfs/xfs_dir2_format.h | 1 + fs/xfs/xfs_dir2_node.c | 13 ++++++------- 2 files changed, 7 insertions(+), 7 deletions(-) diff --git a/fs/xfs/xfs_dir2_format.h b/fs/xfs/xfs_dir2_format.h index a3b1bd841a80..995f1f505a52 100644 --- a/fs/xfs/xfs_dir2_format.h +++ b/fs/xfs/xfs_dir2_format.h @@ -715,6 +715,7 @@ struct xfs_dir3_free_hdr { __be32 firstdb; /* db of first entry */ __be32 nvalid; /* count of valid entries */ __be32 nused; /* count of used entries */ + __be32 pad; /* 64 bit alignment. */ }; struct xfs_dir3_free { diff --git a/fs/xfs/xfs_dir2_node.c b/fs/xfs/xfs_dir2_node.c index 5246de4912d4..2226a00acd15 100644 --- a/fs/xfs/xfs_dir2_node.c +++ b/fs/xfs/xfs_dir2_node.c @@ -263,18 +263,19 @@ xfs_dir3_free_get_buf( * Initialize the new block to be empty, and remember * its first slot as our empty slot. */ - hdr.magic = XFS_DIR2_FREE_MAGIC; - hdr.firstdb = 0; - hdr.nused = 0; - hdr.nvalid = 0; + memset(bp->b_addr, 0, sizeof(struct xfs_dir3_free_hdr)); + memset(&hdr, 0, sizeof(hdr)); + if (xfs_sb_version_hascrc(&mp->m_sb)) { struct xfs_dir3_free_hdr *hdr3 = bp->b_addr; hdr.magic = XFS_DIR3_FREE_MAGIC; + hdr3->hdr.blkno = cpu_to_be64(bp->b_bn); hdr3->hdr.owner = cpu_to_be64(dp->i_ino); uuid_copy(&hdr3->hdr.uuid, &mp->m_sb.sb_uuid); - } + } else + hdr.magic = XFS_DIR2_FREE_MAGIC; xfs_dir3_free_hdr_to_disk(bp->b_addr, &hdr); *bpp = bp; return 0; @@ -1921,8 +1922,6 @@ xfs_dir2_node_addname_int( */ freehdr.firstdb = (fbno - XFS_DIR2_FREE_FIRSTDB(mp)) * xfs_dir3_free_max_bests(mp); - free->hdr.nvalid = 0; - free->hdr.nused = 0; } else { free = fbp->b_addr; bests = xfs_dir3_free_bests_p(mp, free); -- cgit v1.2.3 From 9531e2de6b7f04bd734b4bbc1e16a6955121615a Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Tue, 21 May 2013 18:02:01 +1000 Subject: xfs: remote attribute allocation may be contiguous When CRCs are enabled, there may be multiple allocations made if the headers cause a length overflow. This, however, does not mean that the number of headers required increases, as the second and subsequent extents may be contiguous with the previous extent. Hence when we map the extents to write the attribute data, we may end up with less extents than allocations made. Hence the assertion that we consume the number of headers we calculated in the allocation loop is incorrect and needs to be removed. Signed-off-by: Dave Chinner Reviewed-by: Ben Myers Signed-off-by: Ben Myers (cherry picked from commit 90253cf142469a40f89f989904abf0a1e500e1a6) --- fs/xfs/xfs_attr_remote.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/fs/xfs/xfs_attr_remote.c b/fs/xfs/xfs_attr_remote.c index dee84466dcc9..aad95b08e76b 100644 --- a/fs/xfs/xfs_attr_remote.c +++ b/fs/xfs/xfs_attr_remote.c @@ -359,6 +359,11 @@ xfs_attr_rmtval_set( * into requiring more blocks. e.g. for 512 byte blocks, we'll * spill for another block every 9 headers we require in this * loop. + * + * Note that this can result in contiguous allocation of blocks, + * so we don't use all the space we allocate for headers as we + * have one less header for each contiguous allocation that + * occurs in the map/write loop below. */ if (crcs && blkcnt == 0) { int total_len; @@ -439,7 +444,6 @@ xfs_attr_rmtval_set( lblkno += map.br_blockcount; } ASSERT(valuelen == 0); - ASSERT(hdrcnt == 0); return 0; } -- cgit v1.2.3 From 551b382f5368900d6d82983505cb52553c946a2b Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Tue, 21 May 2013 18:02:02 +1000 Subject: xfs: remote attribute read too short Reading a maximally size remote attribute fails when CRCs are enabled with this verification error: XFS (vdb): remote attribute header does not match required off/len/owner) There are two reasons for this, the first being that the length of the buffer being read is determined from the args->rmtblkcnt which doesn't take into account CRC headers. Hence the mapped length ends up being too short and so we need to calculate it directly from the value length. The second is that the byte count of valid data within a buffer is capped by the length of the data and so doesn't take into account that the buffer might be longer due to headers. Hence we need to calculate the data space in the buffer first before calculating the actual byte count of data. Signed-off-by: Dave Chinner Reviewed-by: Ben Myers Signed-off-by: Ben Myers (cherry picked from commit 913e96bc292e1bb248854686c79d6545ef3ee720) --- fs/xfs/xfs_attr_remote.c | 15 +++++++++------ 1 file changed, 9 insertions(+), 6 deletions(-) diff --git a/fs/xfs/xfs_attr_remote.c b/fs/xfs/xfs_attr_remote.c index aad95b08e76b..bcdc07c4e8f4 100644 --- a/fs/xfs/xfs_attr_remote.c +++ b/fs/xfs/xfs_attr_remote.c @@ -52,9 +52,11 @@ xfs_attr3_rmt_blocks( struct xfs_mount *mp, int attrlen) { - int buflen = XFS_ATTR3_RMT_BUF_SPACE(mp, - mp->m_sb.sb_blocksize); - return (attrlen + buflen - 1) / buflen; + if (xfs_sb_version_hascrc(&mp->m_sb)) { + int buflen = XFS_ATTR3_RMT_BUF_SPACE(mp, mp->m_sb.sb_blocksize); + return (attrlen + buflen - 1) / buflen; + } + return XFS_B_TO_FSB(mp, attrlen); } static bool @@ -206,8 +208,9 @@ xfs_attr_rmtval_get( while (valuelen > 0) { nmap = ATTR_RMTVALUE_MAPSIZE; + blkcnt = xfs_attr3_rmt_blocks(mp, valuelen); error = xfs_bmapi_read(args->dp, (xfs_fileoff_t)lblkno, - args->rmtblkcnt, map, &nmap, + blkcnt, map, &nmap, XFS_BMAPI_ATTRFORK); if (error) return error; @@ -227,8 +230,8 @@ xfs_attr_rmtval_get( if (error) return error; - byte_cnt = min_t(int, valuelen, BBTOB(bp->b_length)); - byte_cnt = XFS_ATTR3_RMT_BUF_SPACE(mp, byte_cnt); + byte_cnt = XFS_ATTR3_RMT_BUF_SPACE(mp, BBTOB(bp->b_length)); + byte_cnt = min_t(int, valuelen, byte_cnt); src = bp->b_addr; if (xfs_sb_version_hascrc(&mp->m_sb)) { -- cgit v1.2.3 From 26f714450c3907ce07c41a0bd1bea40368e0b4da Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Tue, 21 May 2013 18:02:03 +1000 Subject: xfs: remote attribute tail zeroing does too much When an attribute data does not fill then entire remote block, we zero the remaining part of the buffer. This, however, needs to take into account that the buffer has a header, and so the offset where zeroing starts and the length of zeroing need to take this into account. Otherwise we end up with zeros over the end of the attribute value when CRCs are enabled. While there, make sure we only ask to map an extent that covers the remaining range of the attribute, rather than asking every time for the full length of remote data. If the remote attribute blocks are contiguous with other parts of the attribute tree, it will map those blocks as well and we can potentially zero them incorrectly. We can also get buffer size mistmatches when trying to read or remove the remote attribute, and this can lead to not finding the correct buffer when looking it up in cache. Signed-off-by: Dave Chinner Reviewed-by: Ben Myers Signed-off-by: Ben Myers (cherry picked from commit 4af3644c9a53eb2f1ecf69cc53576561b64be4c6) --- fs/xfs/xfs_attr_remote.c | 37 ++++++++++++++++++------------------- 1 file changed, 18 insertions(+), 19 deletions(-) diff --git a/fs/xfs/xfs_attr_remote.c b/fs/xfs/xfs_attr_remote.c index bcdc07c4e8f4..e207bf0004b6 100644 --- a/fs/xfs/xfs_attr_remote.c +++ b/fs/xfs/xfs_attr_remote.c @@ -296,10 +296,7 @@ xfs_attr_rmtval_set( * and we may not need that many, so we have to handle this when * allocating the blocks below. */ - if (!crcs) - blkcnt = XFS_B_TO_FSB(mp, args->valuelen); - else - blkcnt = xfs_attr3_rmt_blocks(mp, args->valuelen); + blkcnt = xfs_attr3_rmt_blocks(mp, args->valuelen); error = xfs_bmap_first_unused(args->trans, args->dp, blkcnt, &lfileoff, XFS_ATTR_FORK); @@ -394,8 +391,11 @@ xfs_attr_rmtval_set( */ lblkno = args->rmtblkno; valuelen = args->valuelen; + blkcnt = args->rmtblkcnt; while (valuelen > 0) { int byte_cnt; + int hdr_size; + int dblkcnt; char *buf; /* @@ -404,7 +404,7 @@ xfs_attr_rmtval_set( xfs_bmap_init(args->flist, args->firstblock); nmap = 1; error = xfs_bmapi_read(dp, (xfs_fileoff_t)lblkno, - args->rmtblkcnt, &map, &nmap, + blkcnt, &map, &nmap, XFS_BMAPI_ATTRFORK); if (error) return(error); @@ -413,26 +413,25 @@ xfs_attr_rmtval_set( (map.br_startblock != HOLESTARTBLOCK)); dblkno = XFS_FSB_TO_DADDR(mp, map.br_startblock), - blkcnt = XFS_FSB_TO_BB(mp, map.br_blockcount); + dblkcnt = XFS_FSB_TO_BB(mp, map.br_blockcount); - bp = xfs_buf_get(mp->m_ddev_targp, dblkno, blkcnt, 0); + bp = xfs_buf_get(mp->m_ddev_targp, dblkno, dblkcnt, 0); if (!bp) return ENOMEM; bp->b_ops = &xfs_attr3_rmt_buf_ops; - - byte_cnt = BBTOB(bp->b_length); - byte_cnt = XFS_ATTR3_RMT_BUF_SPACE(mp, byte_cnt); - if (valuelen < byte_cnt) - byte_cnt = valuelen; - buf = bp->b_addr; - buf += xfs_attr3_rmt_hdr_set(mp, dp->i_ino, offset, + + byte_cnt = XFS_ATTR3_RMT_BUF_SPACE(mp, BBTOB(bp->b_length)); + byte_cnt = min_t(int, valuelen, byte_cnt); + hdr_size = xfs_attr3_rmt_hdr_set(mp, dp->i_ino, offset, byte_cnt, bp); - memcpy(buf, src, byte_cnt); + ASSERT(hdr_size + byte_cnt <= BBTOB(bp->b_length)); - if (byte_cnt < BBTOB(bp->b_length)) - xfs_buf_zero(bp, byte_cnt, - BBTOB(bp->b_length) - byte_cnt); + memcpy(buf + hdr_size, src, byte_cnt); + + if (byte_cnt + hdr_size < BBTOB(bp->b_length)) + xfs_buf_zero(bp, byte_cnt + hdr_size, + BBTOB(bp->b_length) - byte_cnt - hdr_size); error = xfs_bwrite(bp); /* GROT: NOTE: synchronous write */ xfs_buf_relse(bp); @@ -442,9 +441,9 @@ xfs_attr_rmtval_set( src += byte_cnt; valuelen -= byte_cnt; offset += byte_cnt; - hdrcnt--; lblkno += map.br_blockcount; + blkcnt -= map.br_blockcount; } ASSERT(valuelen == 0); return 0; -- cgit v1.2.3 From 58a72281555bf301f6dff24db2db205c87ef8db1 Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Tue, 21 May 2013 18:02:04 +1000 Subject: xfs: correctly map remote attr buffers during removal If we don't map the buffers correctly (same as for get/set operations) then the incore buffer lookup will fail. If a block number matches but a length is wrong, then debug kernels will ASSERT fail in _xfs_buf_find() due to the length mismatch. Ensure that we map the buffers correctly by basing the length of the buffer on the attribute data length rather than the remote block count. Signed-off-by: Dave Chinner Reviewed-by: Ben Myers Signed-off-by: Ben Myers (cherry picked from commit 6863ef8449f1908c19f43db572e4474f24a1e9da) --- fs/xfs/xfs_attr_remote.c | 27 ++++++++++++++++++--------- 1 file changed, 18 insertions(+), 9 deletions(-) diff --git a/fs/xfs/xfs_attr_remote.c b/fs/xfs/xfs_attr_remote.c index e207bf0004b6..d8bcb2d742d1 100644 --- a/fs/xfs/xfs_attr_remote.c +++ b/fs/xfs/xfs_attr_remote.c @@ -468,19 +468,25 @@ xfs_attr_rmtval_remove(xfs_da_args_t *args) mp = args->dp->i_mount; /* - * Roll through the "value", invalidating the attribute value's - * blocks. + * Roll through the "value", invalidating the attribute value's blocks. + * Note that args->rmtblkcnt is the minimum number of data blocks we'll + * see for a CRC enabled remote attribute. Each extent will have a + * header, and so we may have more blocks than we realise here. If we + * fail to map the blocks correctly, we'll have problems with the buffer + * lookups. */ lblkno = args->rmtblkno; - valuelen = args->rmtblkcnt; + valuelen = args->valuelen; + blkcnt = xfs_attr3_rmt_blocks(mp, valuelen); while (valuelen > 0) { + int dblkcnt; + /* * Try to remember where we decided to put the value. */ nmap = 1; error = xfs_bmapi_read(args->dp, (xfs_fileoff_t)lblkno, - args->rmtblkcnt, &map, &nmap, - XFS_BMAPI_ATTRFORK); + blkcnt, &map, &nmap, XFS_BMAPI_ATTRFORK); if (error) return(error); ASSERT(nmap == 1); @@ -488,28 +494,31 @@ xfs_attr_rmtval_remove(xfs_da_args_t *args) (map.br_startblock != HOLESTARTBLOCK)); dblkno = XFS_FSB_TO_DADDR(mp, map.br_startblock), - blkcnt = XFS_FSB_TO_BB(mp, map.br_blockcount); + dblkcnt = XFS_FSB_TO_BB(mp, map.br_blockcount); /* * If the "remote" value is in the cache, remove it. */ - bp = xfs_incore(mp->m_ddev_targp, dblkno, blkcnt, XBF_TRYLOCK); + bp = xfs_incore(mp->m_ddev_targp, dblkno, dblkcnt, XBF_TRYLOCK); if (bp) { xfs_buf_stale(bp); xfs_buf_relse(bp); bp = NULL; } - valuelen -= map.br_blockcount; + valuelen -= XFS_ATTR3_RMT_BUF_SPACE(mp, + XFS_FSB_TO_B(mp, map.br_blockcount)); lblkno += map.br_blockcount; + blkcnt -= map.br_blockcount; + blkcnt = max(blkcnt, xfs_attr3_rmt_blocks(mp, valuelen)); } /* * Keep de-allocating extents until the remote-value region is gone. */ + blkcnt = lblkno - args->rmtblkno; lblkno = args->rmtblkno; - blkcnt = args->rmtblkcnt; done = 0; while (!done) { xfs_bmap_init(args->flist, args->firstblock); -- cgit v1.2.3 From 9e80c76205b46b338cb56c336148f54b2326342f Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Tue, 21 May 2013 18:02:05 +1000 Subject: xfs: fully initialise temp leaf in xfs_attr3_leaf_unbalance xfs_attr3_leaf_unbalance() uses a temporary buffer for recombining the entries in two leaves when the destination leaf requires compaction. The temporary buffer ends up being copied back over the original destination buffer, so the header in the temporary buffer needs to contain all the information that is in the destination buffer. To make sure the temporary buffer is fully initialised, once we've set up the temporary incore header appropriately, write is back to the temporary buffer before starting to move entries around. Signed-off-by: Dave Chinner Reviewed-by: Ben Myers Signed-off-by: Ben Myers (cherry picked from commit 8517de2a81da830f5d90da66b4799f4040c76dc9) --- fs/xfs/xfs_attr_leaf.c | 16 +++++++++++++--- 1 file changed, 13 insertions(+), 3 deletions(-) diff --git a/fs/xfs/xfs_attr_leaf.c b/fs/xfs/xfs_attr_leaf.c index 0bce1b348580..79ece72976ae 100644 --- a/fs/xfs/xfs_attr_leaf.c +++ b/fs/xfs/xfs_attr_leaf.c @@ -2181,14 +2181,24 @@ xfs_attr3_leaf_unbalance( struct xfs_attr_leafblock *tmp_leaf; struct xfs_attr3_icleaf_hdr tmphdr; - tmp_leaf = kmem_alloc(state->blocksize, KM_SLEEP); - memset(tmp_leaf, 0, state->blocksize); - memset(&tmphdr, 0, sizeof(tmphdr)); + tmp_leaf = kmem_zalloc(state->blocksize, KM_SLEEP); + + /* + * Copy the header into the temp leaf so that all the stuff + * not in the incore header is present and gets copied back in + * once we've moved all the entries. + */ + memcpy(tmp_leaf, save_leaf, xfs_attr3_leaf_hdr_size(save_leaf)); + memset(&tmphdr, 0, sizeof(tmphdr)); tmphdr.magic = savehdr.magic; tmphdr.forw = savehdr.forw; tmphdr.back = savehdr.back; tmphdr.firstused = state->blocksize; + + /* write the header to the temp buffer to initialise it */ + xfs_attr3_leaf_hdr_to_disk(tmp_leaf, &tmphdr); + if (xfs_attr3_leaf_order(save_blk->bp, &savehdr, drop_blk->bp, &drophdr)) { xfs_attr3_leaf_moveents(drop_leaf, &drophdr, 0, -- cgit v1.2.3 From 634fd5322a3e6ae632dcf5f20eebc0583ba50838 Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Tue, 21 May 2013 18:02:06 +1000 Subject: xfs: fully initialise temp leaf in xfs_attr3_leaf_compact xfs_attr3_leaf_compact() uses a temporary buffer for compacting the the entries in a leaf. It copies the the original buffer into the temporary buffer, then zeros the original buffer completely. It then copies the entries back into the original buffer. However, the original buffer has not been correctly initialised, and so the movement of the entries goes horribly wrong. Make sure the zeroed destination buffer is fully initialised, and once we've set up the destination incore header appropriately, write is back to the buffer before starting to move entries around. While debugging this, the _d/_s prefixes weren't sufficient to remind me what buffer was what, so rename then all _src/_dst. Signed-off-by: Dave Chinner Reviewed-by: Ben Myers Signed-off-by: Ben Myers (cherry picked from commit d4c712bcf26a25c2b67c90e44e0b74c7993b5334) --- fs/xfs/xfs_attr_leaf.c | 42 ++++++++++++++++++++++++++---------------- 1 file changed, 26 insertions(+), 16 deletions(-) diff --git a/fs/xfs/xfs_attr_leaf.c b/fs/xfs/xfs_attr_leaf.c index 79ece72976ae..5b03d15b707b 100644 --- a/fs/xfs/xfs_attr_leaf.c +++ b/fs/xfs/xfs_attr_leaf.c @@ -1445,11 +1445,12 @@ xfs_attr3_leaf_add_work( STATIC void xfs_attr3_leaf_compact( struct xfs_da_args *args, - struct xfs_attr3_icleaf_hdr *ichdr_d, + struct xfs_attr3_icleaf_hdr *ichdr_dst, struct xfs_buf *bp) { - xfs_attr_leafblock_t *leaf_s, *leaf_d; - struct xfs_attr3_icleaf_hdr ichdr_s; + struct xfs_attr_leafblock *leaf_src; + struct xfs_attr_leafblock *leaf_dst; + struct xfs_attr3_icleaf_hdr ichdr_src; struct xfs_trans *trans = args->trans; struct xfs_mount *mp = trans->t_mountp; char *tmpbuffer; @@ -1457,29 +1458,38 @@ xfs_attr3_leaf_compact( trace_xfs_attr_leaf_compact(args); tmpbuffer = kmem_alloc(XFS_LBSIZE(mp), KM_SLEEP); - ASSERT(tmpbuffer != NULL); memcpy(tmpbuffer, bp->b_addr, XFS_LBSIZE(mp)); memset(bp->b_addr, 0, XFS_LBSIZE(mp)); + leaf_src = (xfs_attr_leafblock_t *)tmpbuffer; + leaf_dst = bp->b_addr; /* - * Copy basic information + * Copy the on-disk header back into the destination buffer to ensure + * all the information in the header that is not part of the incore + * header structure is preserved. */ - leaf_s = (xfs_attr_leafblock_t *)tmpbuffer; - leaf_d = bp->b_addr; - ichdr_s = *ichdr_d; /* struct copy */ - ichdr_d->firstused = XFS_LBSIZE(mp); - ichdr_d->usedbytes = 0; - ichdr_d->count = 0; - ichdr_d->holes = 0; - ichdr_d->freemap[0].base = xfs_attr3_leaf_hdr_size(leaf_s); - ichdr_d->freemap[0].size = ichdr_d->firstused - ichdr_d->freemap[0].base; + memcpy(bp->b_addr, tmpbuffer, xfs_attr3_leaf_hdr_size(leaf_src)); + + /* Initialise the incore headers */ + ichdr_src = *ichdr_dst; /* struct copy */ + ichdr_dst->firstused = XFS_LBSIZE(mp); + ichdr_dst->usedbytes = 0; + ichdr_dst->count = 0; + ichdr_dst->holes = 0; + ichdr_dst->freemap[0].base = xfs_attr3_leaf_hdr_size(leaf_src); + ichdr_dst->freemap[0].size = ichdr_dst->firstused - + ichdr_dst->freemap[0].base; + + + /* write the header back to initialise the underlying buffer */ + xfs_attr3_leaf_hdr_to_disk(leaf_dst, ichdr_dst); /* * Copy all entry's in the same (sorted) order, * but allocate name/value pairs packed and in sequence. */ - xfs_attr3_leaf_moveents(leaf_s, &ichdr_s, 0, leaf_d, ichdr_d, 0, - ichdr_s.count, mp); + xfs_attr3_leaf_moveents(leaf_src, &ichdr_src, 0, leaf_dst, ichdr_dst, 0, + ichdr_src.count, mp); /* * this logs the entire buffer, but the caller must write the header * back to the buffer when it is finished modifying it. -- cgit v1.2.3 From 7bc0dc271e494e12be3afd3c6431e5216347c624 Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Tue, 21 May 2013 18:02:08 +1000 Subject: xfs: rework remote attr CRCs Note: this changes the on-disk remote attribute format. I assert that this is OK to do as CRCs are marked experimental and the first kernel it is included in has not yet reached release yet. Further, the userspace utilities are still evolving and so anyone using this stuff right now is a developer or tester using volatile filesystems for testing this feature. Hence changing the format right now to save longer term pain is the right thing to do. The fundamental change is to move from a header per extent in the attribute to a header per filesytem block in the attribute. This means there are more header blocks and the parsing of the attribute data is slightly more complex, but it has the advantage that we always know the size of the attribute on disk based on the length of the data it contains. This is where the header-per-extent method has problems. We don't know the size of the attribute on disk without first knowing how many extents are used to hold it. And we can't tell from a mapping lookup, either, because remote attributes can be allocated contiguously with other attribute blocks and so there is no obvious way of determining the actual size of the atribute on disk short of walking and mapping buffers. The problem with this approach is that if we map a buffer incorrectly (e.g. we make the last buffer for the attribute data too long), we then get buffer cache lookup failure when we map it correctly. i.e. we get a size mismatch on lookup. This is not necessarily fatal, but it's a cache coherency problem that can lead to returning the wrong data to userspace or writing the wrong data to disk. And debug kernels will assert fail if this occurs. I found lots of niggly little problems trying to fix this issue on a 4k block size filesystem, finally getting it to pass with lots of fixes. The thing is, 1024 byte filesystems still failed, and it was getting really complex handling all the corner cases that were showing up. And there were clearly more that I hadn't found yet. It is complex, fragile code, and if we don't fix it now, it will be complex, fragile code forever more. Hence the simple fix is to add a header to each filesystem block. This gives us the same relationship between the attribute data length and the number of blocks on disk as we have without CRCs - it's a linear mapping and doesn't require us to guess anything. It is simple to implement, too - the remote block count calculated at lookup time can be used by the remote attribute set/get/remove code without modification for both CRC and non-CRC filesystems. The world becomes sane again. Because the copy-in and copy-out now need to iterate over each filesystem block, I moved them into helper functions so we separate the block mapping and buffer manupulations from the attribute data and CRC header manipulations. The code becomes much clearer as a result, and it is a lot easier to understand and debug. It also appears to be much more robust - once it worked on 4k block size filesystems, it has worked without failure on 1k block size filesystems, too. Signed-off-by: Dave Chinner Reviewed-by: Ben Myers Signed-off-by: Ben Myers (cherry picked from commit ad1858d77771172e08016890f0eb2faedec3ecee) --- fs/xfs/xfs_attr_leaf.c | 13 +- fs/xfs/xfs_attr_remote.c | 381 ++++++++++++++++++++++++++++------------------- fs/xfs/xfs_attr_remote.h | 10 ++ fs/xfs/xfs_buf.c | 1 + 4 files changed, 247 insertions(+), 158 deletions(-) diff --git a/fs/xfs/xfs_attr_leaf.c b/fs/xfs/xfs_attr_leaf.c index 5b03d15b707b..d788302e506a 100644 --- a/fs/xfs/xfs_attr_leaf.c +++ b/fs/xfs/xfs_attr_leaf.c @@ -1412,7 +1412,7 @@ xfs_attr3_leaf_add_work( name_rmt->valuelen = 0; name_rmt->valueblk = 0; args->rmtblkno = 1; - args->rmtblkcnt = XFS_B_TO_FSB(mp, args->valuelen); + args->rmtblkcnt = xfs_attr3_rmt_blocks(mp, args->valuelen); } xfs_trans_log_buf(args->trans, bp, XFS_DA_LOGRANGE(leaf, xfs_attr3_leaf_name(leaf, args->index), @@ -2354,8 +2354,9 @@ xfs_attr3_leaf_lookup_int( args->index = probe; args->valuelen = be32_to_cpu(name_rmt->valuelen); args->rmtblkno = be32_to_cpu(name_rmt->valueblk); - args->rmtblkcnt = XFS_B_TO_FSB(args->dp->i_mount, - args->valuelen); + args->rmtblkcnt = xfs_attr3_rmt_blocks( + args->dp->i_mount, + args->valuelen); return XFS_ERROR(EEXIST); } } @@ -2406,7 +2407,8 @@ xfs_attr3_leaf_getvalue( ASSERT(memcmp(args->name, name_rmt->name, args->namelen) == 0); valuelen = be32_to_cpu(name_rmt->valuelen); args->rmtblkno = be32_to_cpu(name_rmt->valueblk); - args->rmtblkcnt = XFS_B_TO_FSB(args->dp->i_mount, valuelen); + args->rmtblkcnt = xfs_attr3_rmt_blocks(args->dp->i_mount, + valuelen); if (args->flags & ATTR_KERNOVAL) { args->valuelen = valuelen; return 0; @@ -2732,7 +2734,8 @@ xfs_attr3_leaf_list_int( args.valuelen = valuelen; args.value = kmem_alloc(valuelen, KM_SLEEP | KM_NOFS); args.rmtblkno = be32_to_cpu(name_rmt->valueblk); - args.rmtblkcnt = XFS_B_TO_FSB(args.dp->i_mount, valuelen); + args.rmtblkcnt = xfs_attr3_rmt_blocks( + args.dp->i_mount, valuelen); retval = xfs_attr_rmtval_get(&args); if (retval) return retval; diff --git a/fs/xfs/xfs_attr_remote.c b/fs/xfs/xfs_attr_remote.c index d8bcb2d742d1..ef6b0c124528 100644 --- a/fs/xfs/xfs_attr_remote.c +++ b/fs/xfs/xfs_attr_remote.c @@ -47,7 +47,7 @@ * Each contiguous block has a header, so it is not just a simple attribute * length to FSB conversion. */ -static int +int xfs_attr3_rmt_blocks( struct xfs_mount *mp, int attrlen) @@ -59,12 +59,43 @@ xfs_attr3_rmt_blocks( return XFS_B_TO_FSB(mp, attrlen); } +/* + * Checking of the remote attribute header is split into two parts. The verifier + * does CRC, location and bounds checking, the unpacking function checks the + * attribute parameters and owner. + */ +static bool +xfs_attr3_rmt_hdr_ok( + struct xfs_mount *mp, + void *ptr, + xfs_ino_t ino, + uint32_t offset, + uint32_t size, + xfs_daddr_t bno) +{ + struct xfs_attr3_rmt_hdr *rmt = ptr; + + if (bno != be64_to_cpu(rmt->rm_blkno)) + return false; + if (offset != be32_to_cpu(rmt->rm_offset)) + return false; + if (size != be32_to_cpu(rmt->rm_bytes)) + return false; + if (ino != be64_to_cpu(rmt->rm_owner)) + return false; + + /* ok */ + return true; +} + static bool xfs_attr3_rmt_verify( - struct xfs_buf *bp) + struct xfs_mount *mp, + void *ptr, + int fsbsize, + xfs_daddr_t bno) { - struct xfs_mount *mp = bp->b_target->bt_mount; - struct xfs_attr3_rmt_hdr *rmt = bp->b_addr; + struct xfs_attr3_rmt_hdr *rmt = ptr; if (!xfs_sb_version_hascrc(&mp->m_sb)) return false; @@ -72,7 +103,9 @@ xfs_attr3_rmt_verify( return false; if (!uuid_equal(&rmt->rm_uuid, &mp->m_sb.sb_uuid)) return false; - if (bp->b_bn != be64_to_cpu(rmt->rm_blkno)) + if (be64_to_cpu(rmt->rm_blkno) != bno) + return false; + if (be32_to_cpu(rmt->rm_bytes) > fsbsize - sizeof(*rmt)) return false; if (be32_to_cpu(rmt->rm_offset) + be32_to_cpu(rmt->rm_bytes) >= XATTR_SIZE_MAX) @@ -88,17 +121,40 @@ xfs_attr3_rmt_read_verify( struct xfs_buf *bp) { struct xfs_mount *mp = bp->b_target->bt_mount; + char *ptr; + int len; + bool corrupt = false; + xfs_daddr_t bno; /* no verification of non-crc buffers */ if (!xfs_sb_version_hascrc(&mp->m_sb)) return; - if (!xfs_verify_cksum(bp->b_addr, BBTOB(bp->b_length), - XFS_ATTR3_RMT_CRC_OFF) || - !xfs_attr3_rmt_verify(bp)) { + ptr = bp->b_addr; + bno = bp->b_bn; + len = BBTOB(bp->b_length); + ASSERT(len >= XFS_LBSIZE(mp)); + + while (len > 0) { + if (!xfs_verify_cksum(ptr, XFS_LBSIZE(mp), + XFS_ATTR3_RMT_CRC_OFF)) { + corrupt = true; + break; + } + if (!xfs_attr3_rmt_verify(mp, ptr, XFS_LBSIZE(mp), bno)) { + corrupt = true; + break; + } + len -= XFS_LBSIZE(mp); + ptr += XFS_LBSIZE(mp); + bno += mp->m_bsize; + } + + if (corrupt) { XFS_CORRUPTION_ERROR(__func__, XFS_ERRLEVEL_LOW, mp, bp->b_addr); xfs_buf_ioerror(bp, EFSCORRUPTED); - } + } else + ASSERT(len == 0); } static void @@ -107,23 +163,39 @@ xfs_attr3_rmt_write_verify( { struct xfs_mount *mp = bp->b_target->bt_mount; struct xfs_buf_log_item *bip = bp->b_fspriv; + char *ptr; + int len; + xfs_daddr_t bno; /* no verification of non-crc buffers */ if (!xfs_sb_version_hascrc(&mp->m_sb)) return; - if (!xfs_attr3_rmt_verify(bp)) { - XFS_CORRUPTION_ERROR(__func__, XFS_ERRLEVEL_LOW, mp, bp->b_addr); - xfs_buf_ioerror(bp, EFSCORRUPTED); - return; - } + ptr = bp->b_addr; + bno = bp->b_bn; + len = BBTOB(bp->b_length); + ASSERT(len >= XFS_LBSIZE(mp)); + + while (len > 0) { + if (!xfs_attr3_rmt_verify(mp, ptr, XFS_LBSIZE(mp), bno)) { + XFS_CORRUPTION_ERROR(__func__, + XFS_ERRLEVEL_LOW, mp, bp->b_addr); + xfs_buf_ioerror(bp, EFSCORRUPTED); + return; + } + if (bip) { + struct xfs_attr3_rmt_hdr *rmt; - if (bip) { - struct xfs_attr3_rmt_hdr *rmt = bp->b_addr; - rmt->rm_lsn = cpu_to_be64(bip->bli_item.li_lsn); + rmt = (struct xfs_attr3_rmt_hdr *)ptr; + rmt->rm_lsn = cpu_to_be64(bip->bli_item.li_lsn); + } + xfs_update_cksum(ptr, XFS_LBSIZE(mp), XFS_ATTR3_RMT_CRC_OFF); + + len -= XFS_LBSIZE(mp); + ptr += XFS_LBSIZE(mp); + bno += mp->m_bsize; } - xfs_update_cksum(bp->b_addr, BBTOB(bp->b_length), - XFS_ATTR3_RMT_CRC_OFF); + ASSERT(len == 0); } const struct xfs_buf_ops xfs_attr3_rmt_buf_ops = { @@ -131,15 +203,16 @@ const struct xfs_buf_ops xfs_attr3_rmt_buf_ops = { .verify_write = xfs_attr3_rmt_write_verify, }; -static int +STATIC int xfs_attr3_rmt_hdr_set( struct xfs_mount *mp, + void *ptr, xfs_ino_t ino, uint32_t offset, uint32_t size, - struct xfs_buf *bp) + xfs_daddr_t bno) { - struct xfs_attr3_rmt_hdr *rmt = bp->b_addr; + struct xfs_attr3_rmt_hdr *rmt = ptr; if (!xfs_sb_version_hascrc(&mp->m_sb)) return 0; @@ -149,36 +222,107 @@ xfs_attr3_rmt_hdr_set( rmt->rm_bytes = cpu_to_be32(size); uuid_copy(&rmt->rm_uuid, &mp->m_sb.sb_uuid); rmt->rm_owner = cpu_to_be64(ino); - rmt->rm_blkno = cpu_to_be64(bp->b_bn); - bp->b_ops = &xfs_attr3_rmt_buf_ops; + rmt->rm_blkno = cpu_to_be64(bno); return sizeof(struct xfs_attr3_rmt_hdr); } /* - * Checking of the remote attribute header is split into two parts. the verifier - * does CRC, location and bounds checking, the unpacking function checks the - * attribute parameters and owner. + * Helper functions to copy attribute data in and out of the one disk extents */ -static bool -xfs_attr3_rmt_hdr_ok( - struct xfs_mount *mp, - xfs_ino_t ino, - uint32_t offset, - uint32_t size, - struct xfs_buf *bp) +STATIC int +xfs_attr_rmtval_copyout( + struct xfs_mount *mp, + struct xfs_buf *bp, + xfs_ino_t ino, + int *offset, + int *valuelen, + char **dst) { - struct xfs_attr3_rmt_hdr *rmt = bp->b_addr; + char *src = bp->b_addr; + xfs_daddr_t bno = bp->b_bn; + int len = BBTOB(bp->b_length); - if (offset != be32_to_cpu(rmt->rm_offset)) - return false; - if (size != be32_to_cpu(rmt->rm_bytes)) - return false; - if (ino != be64_to_cpu(rmt->rm_owner)) - return false; + ASSERT(len >= XFS_LBSIZE(mp)); - /* ok */ - return true; + while (len > 0 && *valuelen > 0) { + int hdr_size = 0; + int byte_cnt = XFS_ATTR3_RMT_BUF_SPACE(mp, XFS_LBSIZE(mp)); + + byte_cnt = min_t(int, *valuelen, byte_cnt); + + if (xfs_sb_version_hascrc(&mp->m_sb)) { + if (!xfs_attr3_rmt_hdr_ok(mp, src, ino, *offset, + byte_cnt, bno)) { + xfs_alert(mp, +"remote attribute header mismatch bno/off/len/owner (0x%llx/0x%x/Ox%x/0x%llx)", + bno, *offset, byte_cnt, ino); + return EFSCORRUPTED; + } + hdr_size = sizeof(struct xfs_attr3_rmt_hdr); + } + + memcpy(*dst, src + hdr_size, byte_cnt); + + /* roll buffer forwards */ + len -= XFS_LBSIZE(mp); + src += XFS_LBSIZE(mp); + bno += mp->m_bsize; + + /* roll attribute data forwards */ + *valuelen -= byte_cnt; + *dst += byte_cnt; + *offset += byte_cnt; + } + return 0; +} + +STATIC void +xfs_attr_rmtval_copyin( + struct xfs_mount *mp, + struct xfs_buf *bp, + xfs_ino_t ino, + int *offset, + int *valuelen, + char **src) +{ + char *dst = bp->b_addr; + xfs_daddr_t bno = bp->b_bn; + int len = BBTOB(bp->b_length); + + ASSERT(len >= XFS_LBSIZE(mp)); + + while (len > 0 && *valuelen > 0) { + int hdr_size; + int byte_cnt = XFS_ATTR3_RMT_BUF_SPACE(mp, XFS_LBSIZE(mp)); + + byte_cnt = min(*valuelen, byte_cnt); + hdr_size = xfs_attr3_rmt_hdr_set(mp, dst, ino, *offset, + byte_cnt, bno); + + memcpy(dst + hdr_size, *src, byte_cnt); + + /* + * If this is the last block, zero the remainder of it. + * Check that we are actually the last block, too. + */ + if (byte_cnt + hdr_size < XFS_LBSIZE(mp)) { + ASSERT(*valuelen - byte_cnt == 0); + ASSERT(len == XFS_LBSIZE(mp)); + memset(dst + hdr_size + byte_cnt, 0, + XFS_LBSIZE(mp) - hdr_size - byte_cnt); + } + + /* roll buffer forwards */ + len -= XFS_LBSIZE(mp); + dst += XFS_LBSIZE(mp); + bno += mp->m_bsize; + + /* roll attribute data forwards */ + *valuelen -= byte_cnt; + *src += byte_cnt; + *offset += byte_cnt; + } } /* @@ -192,13 +336,12 @@ xfs_attr_rmtval_get( struct xfs_bmbt_irec map[ATTR_RMTVALUE_MAPSIZE]; struct xfs_mount *mp = args->dp->i_mount; struct xfs_buf *bp; - xfs_daddr_t dblkno; xfs_dablk_t lblkno = args->rmtblkno; - void *dst = args->value; + char *dst = args->value; int valuelen = args->valuelen; int nmap; int error; - int blkcnt; + int blkcnt = args->rmtblkcnt; int i; int offset = 0; @@ -208,7 +351,6 @@ xfs_attr_rmtval_get( while (valuelen > 0) { nmap = ATTR_RMTVALUE_MAPSIZE; - blkcnt = xfs_attr3_rmt_blocks(mp, valuelen); error = xfs_bmapi_read(args->dp, (xfs_fileoff_t)lblkno, blkcnt, map, &nmap, XFS_BMAPI_ATTRFORK); @@ -217,45 +359,29 @@ xfs_attr_rmtval_get( ASSERT(nmap >= 1); for (i = 0; (i < nmap) && (valuelen > 0); i++) { - int byte_cnt; - char *src; + xfs_daddr_t dblkno; + int dblkcnt; ASSERT((map[i].br_startblock != DELAYSTARTBLOCK) && (map[i].br_startblock != HOLESTARTBLOCK)); dblkno = XFS_FSB_TO_DADDR(mp, map[i].br_startblock); - blkcnt = XFS_FSB_TO_BB(mp, map[i].br_blockcount); + dblkcnt = XFS_FSB_TO_BB(mp, map[i].br_blockcount); error = xfs_trans_read_buf(mp, NULL, mp->m_ddev_targp, - dblkno, blkcnt, 0, &bp, + dblkno, dblkcnt, 0, &bp, &xfs_attr3_rmt_buf_ops); if (error) return error; - byte_cnt = XFS_ATTR3_RMT_BUF_SPACE(mp, BBTOB(bp->b_length)); - byte_cnt = min_t(int, valuelen, byte_cnt); - - src = bp->b_addr; - if (xfs_sb_version_hascrc(&mp->m_sb)) { - if (!xfs_attr3_rmt_hdr_ok(mp, args->dp->i_ino, - offset, byte_cnt, bp)) { - xfs_alert(mp, -"remote attribute header does not match required off/len/owner (0x%x/Ox%x,0x%llx)", - offset, byte_cnt, args->dp->i_ino); - xfs_buf_relse(bp); - return EFSCORRUPTED; - - } - - src += sizeof(struct xfs_attr3_rmt_hdr); - } - - memcpy(dst, src, byte_cnt); + error = xfs_attr_rmtval_copyout(mp, bp, args->dp->i_ino, + &offset, &valuelen, + &dst); xfs_buf_relse(bp); + if (error) + return error; - offset += byte_cnt; - dst += byte_cnt; - valuelen -= byte_cnt; - + /* roll attribute extent map forwards */ lblkno += map[i].br_blockcount; + blkcnt -= map[i].br_blockcount; } } ASSERT(valuelen == 0); @@ -273,17 +399,13 @@ xfs_attr_rmtval_set( struct xfs_inode *dp = args->dp; struct xfs_mount *mp = dp->i_mount; struct xfs_bmbt_irec map; - struct xfs_buf *bp; - xfs_daddr_t dblkno; xfs_dablk_t lblkno; xfs_fileoff_t lfileoff = 0; - void *src = args->value; + char *src = args->value; int blkcnt; int valuelen; int nmap; int error; - int hdrcnt = 0; - bool crcs = xfs_sb_version_hascrc(&mp->m_sb); int offset = 0; trace_xfs_attr_rmtval_set(args); @@ -292,21 +414,14 @@ xfs_attr_rmtval_set( * Find a "hole" in the attribute address space large enough for * us to drop the new attribute's value into. Because CRC enable * attributes have headers, we can't just do a straight byte to FSB - * conversion. We calculate the worst case block count in this case - * and we may not need that many, so we have to handle this when - * allocating the blocks below. + * conversion and have to take the header space into account. */ blkcnt = xfs_attr3_rmt_blocks(mp, args->valuelen); - error = xfs_bmap_first_unused(args->trans, args->dp, blkcnt, &lfileoff, XFS_ATTR_FORK); if (error) return error; - /* Start with the attribute data. We'll allocate the rest afterwards. */ - if (crcs) - blkcnt = XFS_B_TO_FSB(mp, args->valuelen); - args->rmtblkno = lblkno = (xfs_dablk_t)lfileoff; args->rmtblkcnt = blkcnt; @@ -349,31 +464,6 @@ xfs_attr_rmtval_set( (map.br_startblock != HOLESTARTBLOCK)); lblkno += map.br_blockcount; blkcnt -= map.br_blockcount; - hdrcnt++; - - /* - * If we have enough blocks for the attribute data, calculate - * how many extra blocks we need for headers. We might run - * through this multiple times in the case that the additional - * headers in the blocks needed for the data fragments spills - * into requiring more blocks. e.g. for 512 byte blocks, we'll - * spill for another block every 9 headers we require in this - * loop. - * - * Note that this can result in contiguous allocation of blocks, - * so we don't use all the space we allocate for headers as we - * have one less header for each contiguous allocation that - * occurs in the map/write loop below. - */ - if (crcs && blkcnt == 0) { - int total_len; - - total_len = args->valuelen + - hdrcnt * sizeof(struct xfs_attr3_rmt_hdr); - blkcnt = XFS_B_TO_FSB(mp, total_len); - blkcnt -= args->rmtblkcnt; - args->rmtblkcnt += blkcnt; - } /* * Start the next trans in the chain. @@ -390,17 +480,15 @@ xfs_attr_rmtval_set( * the INCOMPLETE flag. */ lblkno = args->rmtblkno; - valuelen = args->valuelen; blkcnt = args->rmtblkcnt; + valuelen = args->valuelen; while (valuelen > 0) { - int byte_cnt; - int hdr_size; - int dblkcnt; - char *buf; + struct xfs_buf *bp; + xfs_daddr_t dblkno; + int dblkcnt; + + ASSERT(blkcnt > 0); - /* - * Try to remember where we decided to put the value. - */ xfs_bmap_init(args->flist, args->firstblock); nmap = 1; error = xfs_bmapi_read(dp, (xfs_fileoff_t)lblkno, @@ -419,29 +507,17 @@ xfs_attr_rmtval_set( if (!bp) return ENOMEM; bp->b_ops = &xfs_attr3_rmt_buf_ops; - buf = bp->b_addr; - - byte_cnt = XFS_ATTR3_RMT_BUF_SPACE(mp, BBTOB(bp->b_length)); - byte_cnt = min_t(int, valuelen, byte_cnt); - hdr_size = xfs_attr3_rmt_hdr_set(mp, dp->i_ino, offset, - byte_cnt, bp); - ASSERT(hdr_size + byte_cnt <= BBTOB(bp->b_length)); - memcpy(buf + hdr_size, src, byte_cnt); - - if (byte_cnt + hdr_size < BBTOB(bp->b_length)) - xfs_buf_zero(bp, byte_cnt + hdr_size, - BBTOB(bp->b_length) - byte_cnt - hdr_size); + xfs_attr_rmtval_copyin(mp, bp, args->dp->i_ino, &offset, + &valuelen, &src); error = xfs_bwrite(bp); /* GROT: NOTE: synchronous write */ xfs_buf_relse(bp); if (error) return error; - src += byte_cnt; - valuelen -= byte_cnt; - offset += byte_cnt; + /* roll attribute extent map forwards */ lblkno += map.br_blockcount; blkcnt -= map.br_blockcount; } @@ -454,19 +530,17 @@ xfs_attr_rmtval_set( * out-of-line buffer that it is stored on. */ int -xfs_attr_rmtval_remove(xfs_da_args_t *args) +xfs_attr_rmtval_remove( + struct xfs_da_args *args) { - xfs_mount_t *mp; - xfs_bmbt_irec_t map; - xfs_buf_t *bp; - xfs_daddr_t dblkno; - xfs_dablk_t lblkno; - int valuelen, blkcnt, nmap, error, done, committed; + struct xfs_mount *mp = args->dp->i_mount; + xfs_dablk_t lblkno; + int blkcnt; + int error; + int done; trace_xfs_attr_rmtval_remove(args); - mp = args->dp->i_mount; - /* * Roll through the "value", invalidating the attribute value's blocks. * Note that args->rmtblkcnt is the minimum number of data blocks we'll @@ -476,10 +550,13 @@ xfs_attr_rmtval_remove(xfs_da_args_t *args) * lookups. */ lblkno = args->rmtblkno; - valuelen = args->valuelen; - blkcnt = xfs_attr3_rmt_blocks(mp, valuelen); - while (valuelen > 0) { - int dblkcnt; + blkcnt = args->rmtblkcnt; + while (blkcnt > 0) { + struct xfs_bmbt_irec map; + struct xfs_buf *bp; + xfs_daddr_t dblkno; + int dblkcnt; + int nmap; /* * Try to remember where we decided to put the value. @@ -506,21 +583,19 @@ xfs_attr_rmtval_remove(xfs_da_args_t *args) bp = NULL; } - valuelen -= XFS_ATTR3_RMT_BUF_SPACE(mp, - XFS_FSB_TO_B(mp, map.br_blockcount)); - lblkno += map.br_blockcount; blkcnt -= map.br_blockcount; - blkcnt = max(blkcnt, xfs_attr3_rmt_blocks(mp, valuelen)); } /* * Keep de-allocating extents until the remote-value region is gone. */ - blkcnt = lblkno - args->rmtblkno; lblkno = args->rmtblkno; + blkcnt = args->rmtblkcnt; done = 0; while (!done) { + int committed; + xfs_bmap_init(args->flist, args->firstblock); error = xfs_bunmapi(args->trans, args->dp, lblkno, blkcnt, XFS_BMAPI_ATTRFORK | XFS_BMAPI_METADATA, diff --git a/fs/xfs/xfs_attr_remote.h b/fs/xfs/xfs_attr_remote.h index c7cca60a062a..92a8fd7977cc 100644 --- a/fs/xfs/xfs_attr_remote.h +++ b/fs/xfs/xfs_attr_remote.h @@ -20,6 +20,14 @@ #define XFS_ATTR3_RMT_MAGIC 0x5841524d /* XARM */ +/* + * There is one of these headers per filesystem block in a remote attribute. + * This is done to ensure there is a 1:1 mapping between the attribute value + * length and the number of blocks needed to store the attribute. This makes the + * verification of a buffer a little more complex, but greatly simplifies the + * allocation, reading and writing of these attributes as we don't have to guess + * the number of blocks needed to store the attribute data. + */ struct xfs_attr3_rmt_hdr { __be32 rm_magic; __be32 rm_offset; @@ -39,6 +47,8 @@ struct xfs_attr3_rmt_hdr { extern const struct xfs_buf_ops xfs_attr3_rmt_buf_ops; +int xfs_attr3_rmt_blocks(struct xfs_mount *mp, int attrlen); + int xfs_attr_rmtval_get(struct xfs_da_args *args); int xfs_attr_rmtval_set(struct xfs_da_args *args); int xfs_attr_rmtval_remove(struct xfs_da_args *args); diff --git a/fs/xfs/xfs_buf.c b/fs/xfs/xfs_buf.c index 0d2554299688..1b2472a46e46 100644 --- a/fs/xfs/xfs_buf.c +++ b/fs/xfs/xfs_buf.c @@ -513,6 +513,7 @@ _xfs_buf_find( xfs_alert(btp->bt_mount, "%s: Block out of range: block 0x%llx, EOFS 0x%llx ", __func__, blkno, eofs); + WARN_ON(1); return NULL; } -- cgit v1.2.3 From 2baad6121e2b2fa3428ee6cb2298107be11ab23a Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Wed, 29 May 2013 13:43:54 +0100 Subject: x86, crc32-pclmul: Fix build with older binutils binutils prior to 2.18 (e.g. the ones found on SLE10) don't support assembling PEXTRD, so a macro based approach like the one for PCLMULQDQ in the same file should be used. This requires making the helper macros capable of recognizing 32-bit general purpose register operands. [ hpa: tagging for stable as it is a low risk build fix ] Signed-off-by: Jan Beulich Link: http://lkml.kernel.org/r/51A6142A02000078000D99D8@nat28.tlf.novell.com Cc: Alexander Boyko Cc: Herbert Xu Cc: Huang Ying Cc: v3.9 Signed-off-by: H. Peter Anvin --- arch/x86/crypto/crc32-pclmul_asm.S | 2 +- arch/x86/include/asm/inst.h | 74 ++++++++++++++++++++++++++++++++++++-- 2 files changed, 73 insertions(+), 3 deletions(-) diff --git a/arch/x86/crypto/crc32-pclmul_asm.S b/arch/x86/crypto/crc32-pclmul_asm.S index 94c27df8a549..f247304299a2 100644 --- a/arch/x86/crypto/crc32-pclmul_asm.S +++ b/arch/x86/crypto/crc32-pclmul_asm.S @@ -240,7 +240,7 @@ fold_64: pand %xmm3, %xmm1 PCLMULQDQ 0x00, CONSTANT, %xmm1 pxor %xmm2, %xmm1 - pextrd $0x01, %xmm1, %eax + PEXTRD 0x01, %xmm1, %eax ret ENDPROC(crc32_pclmul_le_16) diff --git a/arch/x86/include/asm/inst.h b/arch/x86/include/asm/inst.h index 280bf7fb6aba..3e115273ed88 100644 --- a/arch/x86/include/asm/inst.h +++ b/arch/x86/include/asm/inst.h @@ -9,12 +9,68 @@ #define REG_NUM_INVALID 100 -#define REG_TYPE_R64 0 -#define REG_TYPE_XMM 1 +#define REG_TYPE_R32 0 +#define REG_TYPE_R64 1 +#define REG_TYPE_XMM 2 #define REG_TYPE_INVALID 100 + .macro R32_NUM opd r32 + \opd = REG_NUM_INVALID + .ifc \r32,%eax + \opd = 0 + .endif + .ifc \r32,%ecx + \opd = 1 + .endif + .ifc \r32,%edx + \opd = 2 + .endif + .ifc \r32,%ebx + \opd = 3 + .endif + .ifc \r32,%esp + \opd = 4 + .endif + .ifc \r32,%ebp + \opd = 5 + .endif + .ifc \r32,%esi + \opd = 6 + .endif + .ifc \r32,%edi + \opd = 7 + .endif +#ifdef CONFIG_X86_64 + .ifc \r32,%r8d + \opd = 8 + .endif + .ifc \r32,%r9d + \opd = 9 + .endif + .ifc \r32,%r10d + \opd = 10 + .endif + .ifc \r32,%r11d + \opd = 11 + .endif + .ifc \r32,%r12d + \opd = 12 + .endif + .ifc \r32,%r13d + \opd = 13 + .endif + .ifc \r32,%r14d + \opd = 14 + .endif + .ifc \r32,%r15d + \opd = 15 + .endif +#endif + .endm + .macro R64_NUM opd r64 \opd = REG_NUM_INVALID +#ifdef CONFIG_X86_64 .ifc \r64,%rax \opd = 0 .endif @@ -63,6 +119,7 @@ .ifc \r64,%r15 \opd = 15 .endif +#endif .endm .macro XMM_NUM opd xmm @@ -118,10 +175,13 @@ .endm .macro REG_TYPE type reg + R32_NUM reg_type_r32 \reg R64_NUM reg_type_r64 \reg XMM_NUM reg_type_xmm \reg .if reg_type_r64 <> REG_NUM_INVALID \type = REG_TYPE_R64 + .elseif reg_type_r32 <> REG_NUM_INVALID + \type = REG_TYPE_R32 .elseif reg_type_xmm <> REG_NUM_INVALID \type = REG_TYPE_XMM .else @@ -162,6 +222,16 @@ .byte \imm8 .endm + .macro PEXTRD imm8 xmm gpr + R32_NUM extrd_opd1 \gpr + XMM_NUM extrd_opd2 \xmm + PFX_OPD_SIZE + PFX_REX extrd_opd1 extrd_opd2 + .byte 0x0f, 0x3a, 0x16 + MODRM 0xc0 extrd_opd1 extrd_opd2 + .byte \imm8 + .endm + .macro AESKEYGENASSIST rcon xmm1 xmm2 XMM_NUM aeskeygen_opd1 \xmm1 XMM_NUM aeskeygen_opd2 \xmm2 -- cgit v1.2.3 From 5187b28ff08249ab8a162e802209ed04e271ca02 Mon Sep 17 00:00:00 2001 From: Pekka Riikonen Date: Mon, 13 May 2013 14:32:07 +0200 Subject: x86: Allow FPU to be used at interrupt time even with eagerfpu With the addition of eagerfpu the irq_fpu_usable() now returns false negatives especially in the case of ksoftirqd and interrupted idle task, two common cases for FPU use for example in networking/crypto. With eagerfpu=off FPU use is possible in those contexts. This is because of the eagerfpu check in interrupted_kernel_fpu_idle(): ... * For now, with eagerfpu we will return interrupted kernel FPU * state as not-idle. TBD: Ideally we can change the return value * to something like __thread_has_fpu(current). But we need to * be careful of doing __thread_clear_has_fpu() before saving * the FPU etc for supporting nested uses etc. For now, take * the simple route! ... if (use_eager_fpu()) return 0; As eagerfpu is automatically "on" on those CPUs that also have the features like AES-NI this patch changes the eagerfpu check to return 1 in case the kernel_fpu_begin() has not been said yet. Once it has been the __thread_has_fpu() will start returning 0. Notice that with eagerfpu the __thread_has_fpu is always true initially. FPU use is thus always possible no matter what task is under us, unless the state has already been saved with kernel_fpu_begin(). [ hpa: this is a performance regression, not a correctness regression, but since it can be quite serious on CPUs which need encryption at interrupt time I am marking this for urgent/stable. ] Signed-off-by: Pekka Riikonen Link: http://lkml.kernel.org/r/alpine.GSO.2.00.1305131356320.18@git.silcnet.org Cc: v3.7+ Signed-off-by: H. Peter Anvin --- arch/x86/kernel/i387.c | 14 +++++--------- 1 file changed, 5 insertions(+), 9 deletions(-) diff --git a/arch/x86/kernel/i387.c b/arch/x86/kernel/i387.c index 245a71db401a..cb339097b9ea 100644 --- a/arch/x86/kernel/i387.c +++ b/arch/x86/kernel/i387.c @@ -22,23 +22,19 @@ /* * Were we in an interrupt that interrupted kernel mode? * - * For now, with eagerfpu we will return interrupted kernel FPU - * state as not-idle. TBD: Ideally we can change the return value - * to something like __thread_has_fpu(current). But we need to - * be careful of doing __thread_clear_has_fpu() before saving - * the FPU etc for supporting nested uses etc. For now, take - * the simple route! - * * On others, we can do a kernel_fpu_begin/end() pair *ONLY* if that * pair does nothing at all: the thread must not have fpu (so * that we don't try to save the FPU state), and TS must * be set (so that the clts/stts pair does nothing that is * visible in the interrupted kernel thread). + * + * Except for the eagerfpu case when we return 1 unless we've already + * been eager and saved the state in kernel_fpu_begin(). */ static inline bool interrupted_kernel_fpu_idle(void) { if (use_eager_fpu()) - return 0; + return __thread_has_fpu(current); return !__thread_has_fpu(current) && (read_cr0() & X86_CR0_TS); @@ -78,8 +74,8 @@ void __kernel_fpu_begin(void) struct task_struct *me = current; if (__thread_has_fpu(me)) { - __save_init_fpu(me); __thread_clear_has_fpu(me); + __save_init_fpu(me); /* We do 'stts()' in __kernel_fpu_end() */ } else if (!use_eager_fpu()) { this_cpu_write(fpu_owner_task, NULL); -- cgit v1.2.3 From e38b170695d4108eeb6cd84db36f567fc6de4120 Mon Sep 17 00:00:00 2001 From: Somnath Kotur Date: Wed, 29 May 2013 22:55:56 +0000 Subject: be2net: Mark checksum fail for IP fragmented packets HW does not compute L4 checksum for IP Fragmented packets. Signed-off-by: Kalesh AP Signed-off-by: Somnath Kotur Signed-off-by: David S. Miller --- drivers/net/ethernet/emulex/benet/be.h | 1 + drivers/net/ethernet/emulex/benet/be_hw.h | 2 +- drivers/net/ethernet/emulex/benet/be_main.c | 7 ++++++- 3 files changed, 8 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/emulex/benet/be.h b/drivers/net/ethernet/emulex/benet/be.h index f544b297c9ab..0a510684e468 100644 --- a/drivers/net/ethernet/emulex/benet/be.h +++ b/drivers/net/ethernet/emulex/benet/be.h @@ -262,6 +262,7 @@ struct be_rx_compl_info { u8 ipv6; u8 vtm; u8 pkt_type; + u8 ip_frag; }; struct be_rx_obj { diff --git a/drivers/net/ethernet/emulex/benet/be_hw.h b/drivers/net/ethernet/emulex/benet/be_hw.h index 3c1099b47f2a..8780183c6d1c 100644 --- a/drivers/net/ethernet/emulex/benet/be_hw.h +++ b/drivers/net/ethernet/emulex/benet/be_hw.h @@ -356,7 +356,7 @@ struct amap_eth_rx_compl_v0 { u8 ip_version; /* dword 1 */ u8 macdst[6]; /* dword 1 */ u8 vtp; /* dword 1 */ - u8 rsvd0; /* dword 1 */ + u8 ip_frag; /* dword 1 */ u8 fragndx[10]; /* dword 1 */ u8 ct[2]; /* dword 1 */ u8 sw; /* dword 1 */ diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c index ca2967b0f18b..32a6927ca977 100644 --- a/drivers/net/ethernet/emulex/benet/be_main.c +++ b/drivers/net/ethernet/emulex/benet/be_main.c @@ -1599,6 +1599,8 @@ static void be_parse_rx_compl_v0(struct be_eth_rx_compl *compl, compl); } rxcp->port = AMAP_GET_BITS(struct amap_eth_rx_compl_v0, port, compl); + rxcp->ip_frag = AMAP_GET_BITS(struct amap_eth_rx_compl_v0, + ip_frag, compl); } static struct be_rx_compl_info *be_rx_compl_get(struct be_rx_obj *rxo) @@ -1620,6 +1622,9 @@ static struct be_rx_compl_info *be_rx_compl_get(struct be_rx_obj *rxo) else be_parse_rx_compl_v0(compl, rxcp); + if (rxcp->ip_frag) + rxcp->l4_csum = 0; + if (rxcp->vlanf) { /* vlanf could be wrongly set in some cards. * ignore if vtm is not set */ @@ -2168,7 +2173,7 @@ static irqreturn_t be_msix(int irq, void *dev) static inline bool do_gro(struct be_rx_compl_info *rxcp) { - return (rxcp->tcpf && !rxcp->err) ? true : false; + return (rxcp->tcpf && !rxcp->err && rxcp->l4_csum) ? true : false; } static int be_process_rx(struct be_rx_obj *rxo, struct napi_struct *napi, -- cgit v1.2.3 From 01e5b2c4559d084f4eaf0d160d84cc185db141ba Mon Sep 17 00:00:00 2001 From: Somnath Kotur Date: Wed, 29 May 2013 22:56:17 +0000 Subject: be2net: Fix crash on 2nd invocation of PCI AER/EEH error_detected hook During a PCI EEH/AER error recovery flow, if the device did not successfully restart, the error_detected() hook may be called a second time with a "perm_failure" state. This patch skips over driver cleanup for the second invocation of the callback. Also, Lancer error recovery code is fixed-up to handle these changes. Signed-off-by: Kalesh AP Signed-off-by: Somnath kotur Signed-off-by: David S. Miller --- drivers/net/ethernet/emulex/benet/be_cmds.c | 6 ++-- drivers/net/ethernet/emulex/benet/be_main.c | 48 ++++++++++++++--------------- 2 files changed, 26 insertions(+), 28 deletions(-) diff --git a/drivers/net/ethernet/emulex/benet/be_cmds.c b/drivers/net/ethernet/emulex/benet/be_cmds.c index a236ecd27cf3..1db2df61b8af 100644 --- a/drivers/net/ethernet/emulex/benet/be_cmds.c +++ b/drivers/net/ethernet/emulex/benet/be_cmds.c @@ -562,7 +562,7 @@ int lancer_test_and_set_rdy_state(struct be_adapter *adapter) resource_error = lancer_provisioning_error(adapter); if (resource_error) - return -1; + return -EAGAIN; status = lancer_wait_ready(adapter); if (!status) { @@ -590,8 +590,8 @@ int lancer_test_and_set_rdy_state(struct be_adapter *adapter) * when PF provisions resources. */ resource_error = lancer_provisioning_error(adapter); - if (status == -1 && !resource_error) - adapter->eeh_error = true; + if (resource_error) + status = -EAGAIN; return status; } diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c index 32a6927ca977..8bc1b21b1c79 100644 --- a/drivers/net/ethernet/emulex/benet/be_main.c +++ b/drivers/net/ethernet/emulex/benet/be_main.c @@ -4098,6 +4098,7 @@ static int be_get_initial_config(struct be_adapter *adapter) static int lancer_recover_func(struct be_adapter *adapter) { + struct device *dev = &adapter->pdev->dev; int status; status = lancer_test_and_set_rdy_state(adapter); @@ -4109,8 +4110,7 @@ static int lancer_recover_func(struct be_adapter *adapter) be_clear(adapter); - adapter->hw_error = false; - adapter->fw_timeout = false; + be_clear_all_error(adapter); status = be_setup(adapter); if (status) @@ -4122,13 +4122,13 @@ static int lancer_recover_func(struct be_adapter *adapter) goto err; } - dev_err(&adapter->pdev->dev, - "Adapter SLIPORT recovery succeeded\n"); + dev_err(dev, "Error recovery successful\n"); return 0; err: - if (adapter->eeh_error) - dev_err(&adapter->pdev->dev, - "Adapter SLIPORT recovery failed\n"); + if (status == -EAGAIN) + dev_err(dev, "Waiting for resource provisioning\n"); + else + dev_err(dev, "Error recovery failed\n"); return status; } @@ -4137,28 +4137,27 @@ static void be_func_recovery_task(struct work_struct *work) { struct be_adapter *adapter = container_of(work, struct be_adapter, func_recovery_work.work); - int status; + int status = 0; be_detect_error(adapter); if (adapter->hw_error && lancer_chip(adapter)) { - if (adapter->eeh_error) - goto out; - rtnl_lock(); netif_device_detach(adapter->netdev); rtnl_unlock(); status = lancer_recover_func(adapter); - if (!status) netif_device_attach(adapter->netdev); } -out: - schedule_delayed_work(&adapter->func_recovery_work, - msecs_to_jiffies(1000)); + /* In Lancer, for all errors other than provisioning error (-EAGAIN), + * no need to attempt further recovery. + */ + if (!status || status == -EAGAIN) + schedule_delayed_work(&adapter->func_recovery_work, + msecs_to_jiffies(1000)); } static void be_worker(struct work_struct *work) @@ -4441,20 +4440,19 @@ static pci_ers_result_t be_eeh_err_detected(struct pci_dev *pdev, dev_err(&adapter->pdev->dev, "EEH error detected\n"); - adapter->eeh_error = true; - - cancel_delayed_work_sync(&adapter->func_recovery_work); + if (!adapter->eeh_error) { + adapter->eeh_error = true; - rtnl_lock(); - netif_device_detach(netdev); - rtnl_unlock(); + cancel_delayed_work_sync(&adapter->func_recovery_work); - if (netif_running(netdev)) { rtnl_lock(); - be_close(netdev); + netif_device_detach(netdev); + if (netif_running(netdev)) + be_close(netdev); rtnl_unlock(); + + be_clear(adapter); } - be_clear(adapter); if (state == pci_channel_io_perm_failure) return PCI_ERS_RESULT_DISCONNECT; @@ -4479,7 +4477,6 @@ static pci_ers_result_t be_eeh_reset(struct pci_dev *pdev) int status; dev_info(&adapter->pdev->dev, "EEH reset\n"); - be_clear_all_error(adapter); status = pci_enable_device(pdev); if (status) @@ -4497,6 +4494,7 @@ static pci_ers_result_t be_eeh_reset(struct pci_dev *pdev) return PCI_ERS_RESULT_DISCONNECT; pci_cleanup_aer_uncorrect_error_status(pdev); + be_clear_all_error(adapter); return PCI_ERS_RESULT_RECOVERED; } -- cgit v1.2.3 From 21363ca873334391992f2f424856aa864345bb61 Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger Date: Wed, 29 May 2013 21:35:23 -0700 Subject: target/file: Fix off-by-one READ_CAPACITY bug for !S_ISBLK export This patch fixes a bug where FILEIO was incorrectly reporting the number of logical blocks (+ 1) when using non struct block_device export mode. It changes fd_get_blocks() to follow all other backend ->get_blocks() cases, and reduces the calculated dev_size by one dev->dev_attrib.block_size number of bytes, and also fixes initial fd_block_size assignment at fd_configure_device() time introduced in commit 0fd97ccf4. Reported-by: Wenchao Xia Reported-by: Badari Pulavarty Tested-by: Badari Pulavarty Cc: stable@vger.kernel.org Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_file.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) diff --git a/drivers/target/target_core_file.c b/drivers/target/target_core_file.c index 1b1d544e927a..b11890d85120 100644 --- a/drivers/target/target_core_file.c +++ b/drivers/target/target_core_file.c @@ -153,6 +153,7 @@ static int fd_configure_device(struct se_device *dev) struct request_queue *q = bdev_get_queue(inode->i_bdev); unsigned long long dev_size; + fd_dev->fd_block_size = bdev_logical_block_size(inode->i_bdev); /* * Determine the number of bytes from i_size_read() minus * one (1) logical sector from underlying struct block_device @@ -199,6 +200,7 @@ static int fd_configure_device(struct se_device *dev) goto fail; } + fd_dev->fd_block_size = FD_BLOCKSIZE; /* * Limit UNMAP emulation to 8k Number of LBAs (NoLB) */ @@ -217,9 +219,7 @@ static int fd_configure_device(struct se_device *dev) dev->dev_attrib.max_write_same_len = 0x1000; } - fd_dev->fd_block_size = dev->dev_attrib.hw_block_size; - - dev->dev_attrib.hw_block_size = FD_BLOCKSIZE; + dev->dev_attrib.hw_block_size = fd_dev->fd_block_size; dev->dev_attrib.hw_max_sectors = FD_MAX_SECTORS; dev->dev_attrib.hw_queue_depth = FD_MAX_DEVICE_QUEUE_DEPTH; @@ -694,11 +694,12 @@ static sector_t fd_get_blocks(struct se_device *dev) * to handle underlying block_device resize operations. */ if (S_ISBLK(i->i_mode)) - dev_size = (i_size_read(i) - fd_dev->fd_block_size); + dev_size = i_size_read(i); else dev_size = fd_dev->fd_dev_size; - return div_u64(dev_size, dev->dev_attrib.block_size); + return div_u64(dev_size - dev->dev_attrib.block_size, + dev->dev_attrib.block_size); } static struct sbc_ops fd_sbc_ops = { -- cgit v1.2.3 From cea4dcfdad926a27a18e188720efe0f2c9403456 Mon Sep 17 00:00:00 2001 From: Kees Cook Date: Thu, 23 May 2013 10:32:17 -0700 Subject: iscsi-target: fix heap buffer overflow on error If a key was larger than 64 bytes, as checked by iscsi_check_key(), the error response packet, generated by iscsi_add_notunderstood_response(), would still attempt to copy the entire key into the packet, overflowing the structure on the heap. Remote preauthentication kernel memory corruption was possible if a target was configured and listening on the network. CVE-2013-2850 Signed-off-by: Kees Cook Cc: stable@vger.kernel.org Signed-off-by: Nicholas Bellinger --- drivers/target/iscsi/iscsi_target_parameters.c | 8 +++----- drivers/target/iscsi/iscsi_target_parameters.h | 4 +++- 2 files changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/target/iscsi/iscsi_target_parameters.c b/drivers/target/iscsi/iscsi_target_parameters.c index c2185fc31136..e38222191a33 100644 --- a/drivers/target/iscsi/iscsi_target_parameters.c +++ b/drivers/target/iscsi/iscsi_target_parameters.c @@ -758,9 +758,9 @@ static int iscsi_add_notunderstood_response( } INIT_LIST_HEAD(&extra_response->er_list); - strncpy(extra_response->key, key, strlen(key) + 1); - strncpy(extra_response->value, NOTUNDERSTOOD, - strlen(NOTUNDERSTOOD) + 1); + strlcpy(extra_response->key, key, sizeof(extra_response->key)); + strlcpy(extra_response->value, NOTUNDERSTOOD, + sizeof(extra_response->value)); list_add_tail(&extra_response->er_list, ¶m_list->extra_response_list); @@ -1629,8 +1629,6 @@ int iscsi_decode_text_input( if (phase & PHASE_SECURITY) { if (iscsi_check_for_auth_key(key) > 0) { - char *tmpptr = key + strlen(key); - *tmpptr = '='; kfree(tmpbuf); return 1; } diff --git a/drivers/target/iscsi/iscsi_target_parameters.h b/drivers/target/iscsi/iscsi_target_parameters.h index 915b06798505..a47046a752aa 100644 --- a/drivers/target/iscsi/iscsi_target_parameters.h +++ b/drivers/target/iscsi/iscsi_target_parameters.h @@ -1,8 +1,10 @@ #ifndef ISCSI_PARAMETERS_H #define ISCSI_PARAMETERS_H +#include + struct iscsi_extra_response { - char key[64]; + char key[KEY_MAXLEN]; char value[32]; struct list_head er_list; } ____cacheline_aligned; -- cgit v1.2.3 From d68c380590c390a488fe214e5ebf9439216ac3ba Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Mon, 27 May 2013 12:28:25 -0300 Subject: clk: mxs: Include clk mxs header file Fix the following sparse warnings: drivers/clk/mxs/clk-imx28.c:72:5: warning: symbol 'mxs_saif_clkmux_select' was not declared. Should it be static? drivers/clk/mxs/clk-imx28.c:156:12: warning: symbol 'mx28_clocks_init' was not declared. Should it be static? Signed-off-by: Fabio Estevam Acked-by: Shawn Guo Signed-off-by: Mike Turquette [mturquette@linaro.org: fixed $SUBJECT line] --- drivers/clk/mxs/clk-imx28.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/clk/mxs/clk-imx28.c b/drivers/clk/mxs/clk-imx28.c index d0e5eed146de..4faf0afc44cd 100644 --- a/drivers/clk/mxs/clk-imx28.c +++ b/drivers/clk/mxs/clk-imx28.c @@ -10,6 +10,7 @@ */ #include +#include #include #include #include -- cgit v1.2.3 From 970fa986fadb1165cf38b45b70e98302a3bee497 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Fri, 31 May 2013 12:45:09 +1000 Subject: drm/qxl: fix build warnings on 32-bit Just the usual printk related warnings. Signed-off-by: Dave Airlie --- drivers/gpu/drm/qxl/qxl_ioctl.c | 4 ++-- drivers/gpu/drm/qxl/qxl_kms.c | 9 +++++---- 2 files changed, 7 insertions(+), 6 deletions(-) diff --git a/drivers/gpu/drm/qxl/qxl_ioctl.c b/drivers/gpu/drm/qxl/qxl_ioctl.c index 6db7370373ea..a4b71b25fa53 100644 --- a/drivers/gpu/drm/qxl/qxl_ioctl.c +++ b/drivers/gpu/drm/qxl/qxl_ioctl.c @@ -151,7 +151,7 @@ static int qxl_execbuffer_ioctl(struct drm_device *dev, void *data, struct qxl_bo *cmd_bo; int release_type; struct drm_qxl_command *commands = - (struct drm_qxl_command *)execbuffer->commands; + (struct drm_qxl_command *)(uintptr_t)execbuffer->commands; if (DRM_COPY_FROM_USER(&user_cmd, &commands[cmd_num], sizeof(user_cmd))) @@ -193,7 +193,7 @@ static int qxl_execbuffer_ioctl(struct drm_device *dev, void *data, for (i = 0 ; i < user_cmd.relocs_num; ++i) { if (DRM_COPY_FROM_USER(&reloc, - &((struct drm_qxl_reloc *)user_cmd.relocs)[i], + &((struct drm_qxl_reloc *)(uintptr_t)user_cmd.relocs)[i], sizeof(reloc))) { qxl_bo_list_unreserve(&reloc_list, true); qxl_release_unreserve(qdev, release); diff --git a/drivers/gpu/drm/qxl/qxl_kms.c b/drivers/gpu/drm/qxl/qxl_kms.c index 85127ed24cfd..e27ce2a907cf 100644 --- a/drivers/gpu/drm/qxl/qxl_kms.c +++ b/drivers/gpu/drm/qxl/qxl_kms.c @@ -128,12 +128,13 @@ int qxl_device_init(struct qxl_device *qdev, qdev->vram_mapping = io_mapping_create_wc(qdev->vram_base, pci_resource_len(pdev, 0)); qdev->surface_mapping = io_mapping_create_wc(qdev->surfaceram_base, qdev->surfaceram_size); - DRM_DEBUG_KMS("qxl: vram %p-%p(%dM %dk), surface %p-%p(%dM %dk)\n", - (void *)qdev->vram_base, (void *)pci_resource_end(pdev, 0), + DRM_DEBUG_KMS("qxl: vram %llx-%llx(%dM %dk), surface %llx-%llx(%dM %dk)\n", + (unsigned long long)qdev->vram_base, + (unsigned long long)pci_resource_end(pdev, 0), (int)pci_resource_len(pdev, 0) / 1024 / 1024, (int)pci_resource_len(pdev, 0) / 1024, - (void *)qdev->surfaceram_base, - (void *)pci_resource_end(pdev, 1), + (unsigned long long)qdev->surfaceram_base, + (unsigned long long)pci_resource_end(pdev, 1), (int)qdev->surfaceram_size / 1024 / 1024, (int)qdev->surfaceram_size / 1024); -- cgit v1.2.3 From d5ddad4168348337d98d6b8f156a3892de444411 Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger Date: Fri, 31 May 2013 00:46:11 -0700 Subject: target: Propigate up ->cmd_kref put return via transport_generic_free_cmd Go ahead and propigate up the ->cmd_kref put return value from target_put_sess_cmd() -> transport_release_cmd() -> transport_put_cmd() -> transport_generic_free_cmd(). This is useful for certain fabrics when determining the active I/O shutdown case with SCF_ACK_KREF where a final target_put_sess_cmd() is still required by the caller. Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_transport.c | 28 +++++++++++++++------------- include/target/target_core_fabric.h | 2 +- 2 files changed, 16 insertions(+), 14 deletions(-) diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c index bbca144821c5..21e315874a54 100644 --- a/drivers/target/target_core_transport.c +++ b/drivers/target/target_core_transport.c @@ -65,7 +65,7 @@ static void transport_complete_task_attr(struct se_cmd *cmd); static void transport_handle_queue_full(struct se_cmd *cmd, struct se_device *dev); static int transport_generic_get_mem(struct se_cmd *cmd); -static void transport_put_cmd(struct se_cmd *cmd); +static int transport_put_cmd(struct se_cmd *cmd); static void target_complete_ok_work(struct work_struct *work); int init_se_kmem_caches(void) @@ -1944,7 +1944,7 @@ static inline void transport_free_pages(struct se_cmd *cmd) * This routine unconditionally frees a command, and reference counting * or list removal must be done in the caller. */ -static void transport_release_cmd(struct se_cmd *cmd) +static int transport_release_cmd(struct se_cmd *cmd) { BUG_ON(!cmd->se_tfo); @@ -1956,11 +1956,11 @@ static void transport_release_cmd(struct se_cmd *cmd) * If this cmd has been setup with target_get_sess_cmd(), drop * the kref and call ->release_cmd() in kref callback. */ - if (cmd->check_release != 0) { - target_put_sess_cmd(cmd->se_sess, cmd); - return; - } + if (cmd->check_release != 0) + return target_put_sess_cmd(cmd->se_sess, cmd); + cmd->se_tfo->release_cmd(cmd); + return 1; } /** @@ -1969,7 +1969,7 @@ static void transport_release_cmd(struct se_cmd *cmd) * * This routine releases our reference to the command and frees it if possible. */ -static void transport_put_cmd(struct se_cmd *cmd) +static int transport_put_cmd(struct se_cmd *cmd) { unsigned long flags; @@ -1977,7 +1977,7 @@ static void transport_put_cmd(struct se_cmd *cmd) if (atomic_read(&cmd->t_fe_count) && !atomic_dec_and_test(&cmd->t_fe_count)) { spin_unlock_irqrestore(&cmd->t_state_lock, flags); - return; + return 0; } if (cmd->transport_state & CMD_T_DEV_ACTIVE) { @@ -1987,8 +1987,7 @@ static void transport_put_cmd(struct se_cmd *cmd) spin_unlock_irqrestore(&cmd->t_state_lock, flags); transport_free_pages(cmd); - transport_release_cmd(cmd); - return; + return transport_release_cmd(cmd); } void *transport_kmap_data_sg(struct se_cmd *cmd) @@ -2153,13 +2152,15 @@ static void transport_write_pending_qf(struct se_cmd *cmd) } } -void transport_generic_free_cmd(struct se_cmd *cmd, int wait_for_tasks) +int transport_generic_free_cmd(struct se_cmd *cmd, int wait_for_tasks) { + int ret = 0; + if (!(cmd->se_cmd_flags & SCF_SE_LUN_CMD)) { if (wait_for_tasks && (cmd->se_cmd_flags & SCF_SCSI_TMR_CDB)) transport_wait_for_tasks(cmd); - transport_release_cmd(cmd); + ret = transport_release_cmd(cmd); } else { if (wait_for_tasks) transport_wait_for_tasks(cmd); @@ -2167,8 +2168,9 @@ void transport_generic_free_cmd(struct se_cmd *cmd, int wait_for_tasks) if (cmd->se_lun) transport_lun_remove_cmd(cmd); - transport_put_cmd(cmd); + ret = transport_put_cmd(cmd); } + return ret; } EXPORT_SYMBOL(transport_generic_free_cmd); diff --git a/include/target/target_core_fabric.h b/include/target/target_core_fabric.h index 8a26f0d55fd1..1dcce9cc99b9 100644 --- a/include/target/target_core_fabric.h +++ b/include/target/target_core_fabric.h @@ -114,7 +114,7 @@ sense_reason_t transport_generic_new_cmd(struct se_cmd *); void target_execute_cmd(struct se_cmd *cmd); -void transport_generic_free_cmd(struct se_cmd *, int); +int transport_generic_free_cmd(struct se_cmd *, int); bool transport_wait_for_tasks(struct se_cmd *); int transport_check_aborted_status(struct se_cmd *, int); -- cgit v1.2.3 From aafc9d158b0039e600fc429246c7bb04a111fb26 Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger Date: Fri, 31 May 2013 00:49:41 -0700 Subject: iscsi-target: Fix iscsit_free_cmd() se_cmd->cmd_kref shutdown handling With the introduction of target_get_sess_cmd() referencing counting for ISCSI_OP_SCSI_CMD processing with iser-target, iscsit_free_cmd() usage in traditional iscsi-target driver code now needs to be aware of the active I/O shutdown case when a remaining se_cmd->cmd_kref reference may exist after transport_generic_free_cmd() completes, requiring a final target_put_sess_cmd() to release iscsi_cmd descriptor memory. This patch changes iscsit_free_cmd() to invoke __iscsit_free_cmd() before transport_generic_free_cmd() -> target_put_sess_cmd(), and also avoids aquiring the per-connection queue locks for typical fast-path calls during normal ISTATE_REMOVE operation. Also update iscsit_free_cmd() usage throughout iscsi-target to use the new 'bool shutdown' parameter. This patch fixes a regression bug introduced during v3.10-rc1 in commit 3e1c81a95, that was causing the following WARNING to appear: [ 257.235153] ------------[ cut here]------------ [ 257.240314] WARNING: at kernel/softirq.c:160 local_bh_enable_ip+0x3c/0x86() [ 257.248089] Modules linked in: vhost_scsi ib_srpt ib_cm ib_sa ib_mad ib_core tcm_qla2xxx tcm_loop tcm_fc libfc iscsi_target_mod target_core_pscsi target_core_file target_core_iblock target_core_mod configfs ipv6 iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi loop acpi_cpufreq freq_table mperf kvm_intel kvm crc32c_intel button ehci_pci pcspkr joydev i2c_i801 microcode ext3 jbd raid10 raid456 async_pq async_xor xor async_memcpy async_raid6_recov raid6_pq async_tx raid1 raid0 linear igb hwmon i2c_algo_bit i2c_core ptp ata_piix libata qla2xxx uhci_hcd ehci_hcd mlx4_core scsi_transport_fc scsi_tgt pps_core [ 257.308748] CPU: 1 PID: 3295 Comm: iscsi_ttx Not tainted 3.10.0-rc2+ #103 [ 257.316329] Hardware name: Intel Corporation S5520HC/S5520HC, BIOS S5500.86B.01.00.0057.031020111721 03/10/2011 [ 257.327597] ffffffff814c24b7 ffff880458331b58 ffffffff8138eef2 ffff880458331b98 [ 257.335892] ffffffff8102c052 ffff880400000008 0000000000000000 ffff88085bdf0000 [ 257.344191] ffff88085bdf00d8 ffff88085bdf00e0 ffff88085bdf00f8 ffff880458331ba8 [ 257.352488] Call Trace: [ 257.355223] [] dump_stack+0x19/0x1f [ 257.360963] [] warn_slowpath_common+0x62/0x7b [ 257.367669] [] warn_slowpath_null+0x15/0x17 [ 257.374181] [] local_bh_enable_ip+0x3c/0x86 [ 257.380697] [] _raw_spin_unlock_bh+0x10/0x12 [ 257.387311] [] iscsit_free_r2ts_from_list+0x5e/0x67 [iscsi_target_mod] [ 257.396438] [] iscsit_release_cmd+0x20/0x223 [iscsi_target_mod] [ 257.404893] [] lio_release_cmd+0x3a/0x3e [iscsi_target_mod] [ 257.412964] [] target_release_cmd_kref+0x7a/0x7c [target_core_mod] [ 257.421712] [] target_put_sess_cmd+0x5f/0x7f [target_core_mod] [ 257.430071] [] transport_release_cmd+0x59/0x6f [target_core_mod] [ 257.438625] [] transport_put_cmd+0x131/0x140 [target_core_mod] [ 257.446985] [] ? transport_wait_for_tasks+0xfa/0x1d5 [target_core_mod] [ 257.456121] [] transport_generic_free_cmd+0x4e/0x52 [target_core_mod] [ 257.465159] [] ? __migrate_task+0x110/0x110 [ 257.471674] [] iscsit_free_cmd+0x46/0x55 [iscsi_target_mod] [ 257.479741] [] iscsit_immediate_queue+0x301/0x353 [iscsi_target_mod] [ 257.488683] [] iscsi_target_tx_thread+0x1c6/0x2a8 [iscsi_target_mod] [ 257.497623] [] ? wake_up_bit+0x25/0x25 [ 257.503652] [] ? iscsit_ack_from_expstatsn+0xd5/0xd5 [iscsi_target_mod] [ 257.512882] [] kthread+0xb0/0xb8 [ 257.518329] [] ? kthread_freezable_should_stop+0x60/0x60 [ 257.526105] [] ret_from_fork+0x7c/0xb0 [ 257.532133] [] ? kthread_freezable_should_stop+0x60/0x60 [ 257.539906] ---[ end trace 5520397d0f2e0800 ]--- Signed-off-by: Nicholas Bellinger --- drivers/target/iscsi/iscsi_target.c | 12 ++++---- drivers/target/iscsi/iscsi_target_erl2.c | 12 ++++---- drivers/target/iscsi/iscsi_target_util.c | 50 +++++++++++++++++++++++--------- drivers/target/iscsi/iscsi_target_util.h | 2 +- 4 files changed, 50 insertions(+), 26 deletions(-) diff --git a/drivers/target/iscsi/iscsi_target.c b/drivers/target/iscsi/iscsi_target.c index 262ef1f23b38..d7705e5824fb 100644 --- a/drivers/target/iscsi/iscsi_target.c +++ b/drivers/target/iscsi/iscsi_target.c @@ -651,7 +651,7 @@ static int iscsit_add_reject( cmd->buf_ptr = kmemdup(buf, ISCSI_HDR_LEN, GFP_KERNEL); if (!cmd->buf_ptr) { pr_err("Unable to allocate memory for cmd->buf_ptr\n"); - iscsit_release_cmd(cmd); + iscsit_free_cmd(cmd, false); return -1; } @@ -697,7 +697,7 @@ int iscsit_add_reject_from_cmd( cmd->buf_ptr = kmemdup(buf, ISCSI_HDR_LEN, GFP_KERNEL); if (!cmd->buf_ptr) { pr_err("Unable to allocate memory for cmd->buf_ptr\n"); - iscsit_release_cmd(cmd); + iscsit_free_cmd(cmd, false); return -1; } @@ -1743,7 +1743,7 @@ int iscsit_handle_nop_out(struct iscsi_conn *conn, struct iscsi_cmd *cmd, return 0; out: if (cmd) - iscsit_release_cmd(cmd); + iscsit_free_cmd(cmd, false); ping_out: kfree(ping_data); return ret; @@ -2251,7 +2251,7 @@ iscsit_handle_logout_cmd(struct iscsi_conn *conn, struct iscsi_cmd *cmd, if (conn->conn_state != TARG_CONN_STATE_LOGGED_IN) { pr_err("Received logout request on connection that" " is not in logged in state, ignoring request.\n"); - iscsit_release_cmd(cmd); + iscsit_free_cmd(cmd, false); return 0; } @@ -3665,7 +3665,7 @@ iscsit_immediate_queue(struct iscsi_conn *conn, struct iscsi_cmd *cmd, int state list_del(&cmd->i_conn_node); spin_unlock_bh(&conn->cmd_lock); - iscsit_free_cmd(cmd); + iscsit_free_cmd(cmd, false); break; case ISTATE_SEND_NOPIN_WANT_RESPONSE: iscsit_mod_nopin_response_timer(conn); @@ -4122,7 +4122,7 @@ static void iscsit_release_commands_from_conn(struct iscsi_conn *conn) iscsit_increment_maxcmdsn(cmd, sess); - iscsit_free_cmd(cmd); + iscsit_free_cmd(cmd, true); spin_lock_bh(&conn->cmd_lock); } diff --git a/drivers/target/iscsi/iscsi_target_erl2.c b/drivers/target/iscsi/iscsi_target_erl2.c index ba6091bf93fc..45a5afd5ea13 100644 --- a/drivers/target/iscsi/iscsi_target_erl2.c +++ b/drivers/target/iscsi/iscsi_target_erl2.c @@ -143,7 +143,7 @@ void iscsit_free_connection_recovery_entires(struct iscsi_session *sess) list_del(&cmd->i_conn_node); cmd->conn = NULL; spin_unlock(&cr->conn_recovery_cmd_lock); - iscsit_free_cmd(cmd); + iscsit_free_cmd(cmd, true); spin_lock(&cr->conn_recovery_cmd_lock); } spin_unlock(&cr->conn_recovery_cmd_lock); @@ -165,7 +165,7 @@ void iscsit_free_connection_recovery_entires(struct iscsi_session *sess) list_del(&cmd->i_conn_node); cmd->conn = NULL; spin_unlock(&cr->conn_recovery_cmd_lock); - iscsit_free_cmd(cmd); + iscsit_free_cmd(cmd, true); spin_lock(&cr->conn_recovery_cmd_lock); } spin_unlock(&cr->conn_recovery_cmd_lock); @@ -248,7 +248,7 @@ void iscsit_discard_cr_cmds_by_expstatsn( iscsit_remove_cmd_from_connection_recovery(cmd, sess); spin_unlock(&cr->conn_recovery_cmd_lock); - iscsit_free_cmd(cmd); + iscsit_free_cmd(cmd, true); spin_lock(&cr->conn_recovery_cmd_lock); } spin_unlock(&cr->conn_recovery_cmd_lock); @@ -302,7 +302,7 @@ int iscsit_discard_unacknowledged_ooo_cmdsns_for_conn(struct iscsi_conn *conn) list_del(&cmd->i_conn_node); spin_unlock_bh(&conn->cmd_lock); - iscsit_free_cmd(cmd); + iscsit_free_cmd(cmd, true); spin_lock_bh(&conn->cmd_lock); } spin_unlock_bh(&conn->cmd_lock); @@ -355,7 +355,7 @@ int iscsit_prepare_cmds_for_realligance(struct iscsi_conn *conn) list_del(&cmd->i_conn_node); spin_unlock_bh(&conn->cmd_lock); - iscsit_free_cmd(cmd); + iscsit_free_cmd(cmd, true); spin_lock_bh(&conn->cmd_lock); continue; } @@ -375,7 +375,7 @@ int iscsit_prepare_cmds_for_realligance(struct iscsi_conn *conn) iscsi_sna_gte(cmd->cmd_sn, conn->sess->exp_cmd_sn)) { list_del(&cmd->i_conn_node); spin_unlock_bh(&conn->cmd_lock); - iscsit_free_cmd(cmd); + iscsit_free_cmd(cmd, true); spin_lock_bh(&conn->cmd_lock); continue; } diff --git a/drivers/target/iscsi/iscsi_target_util.c b/drivers/target/iscsi/iscsi_target_util.c index 2cc6c9a3ffb8..08a3bacef0c5 100644 --- a/drivers/target/iscsi/iscsi_target_util.c +++ b/drivers/target/iscsi/iscsi_target_util.c @@ -676,40 +676,56 @@ void iscsit_free_queue_reqs_for_conn(struct iscsi_conn *conn) void iscsit_release_cmd(struct iscsi_cmd *cmd) { - struct iscsi_conn *conn = cmd->conn; - - iscsit_free_r2ts_from_list(cmd); - iscsit_free_all_datain_reqs(cmd); - kfree(cmd->buf_ptr); kfree(cmd->pdu_list); kfree(cmd->seq_list); kfree(cmd->tmr_req); kfree(cmd->iov_data); - if (conn) { + kmem_cache_free(lio_cmd_cache, cmd); +} + +static void __iscsit_free_cmd(struct iscsi_cmd *cmd, bool scsi_cmd, + bool check_queues) +{ + struct iscsi_conn *conn = cmd->conn; + + if (scsi_cmd) { + if (cmd->data_direction == DMA_TO_DEVICE) { + iscsit_stop_dataout_timer(cmd); + iscsit_free_r2ts_from_list(cmd); + } + if (cmd->data_direction == DMA_FROM_DEVICE) + iscsit_free_all_datain_reqs(cmd); + } + + if (conn && check_queues) { iscsit_remove_cmd_from_immediate_queue(cmd, conn); iscsit_remove_cmd_from_response_queue(cmd, conn); } - - kmem_cache_free(lio_cmd_cache, cmd); } -void iscsit_free_cmd(struct iscsi_cmd *cmd) +void iscsit_free_cmd(struct iscsi_cmd *cmd, bool shutdown) { + struct se_cmd *se_cmd = NULL; + int rc; /* * Determine if a struct se_cmd is associated with * this struct iscsi_cmd. */ switch (cmd->iscsi_opcode) { case ISCSI_OP_SCSI_CMD: - if (cmd->data_direction == DMA_TO_DEVICE) - iscsit_stop_dataout_timer(cmd); + se_cmd = &cmd->se_cmd; + __iscsit_free_cmd(cmd, true, shutdown); /* * Fallthrough */ case ISCSI_OP_SCSI_TMFUNC: - transport_generic_free_cmd(&cmd->se_cmd, 1); + rc = transport_generic_free_cmd(&cmd->se_cmd, 1); + if (!rc && shutdown && se_cmd && se_cmd->se_sess) { + __iscsit_free_cmd(cmd, true, shutdown); + target_put_sess_cmd(se_cmd->se_sess, se_cmd); + } break; case ISCSI_OP_REJECT: /* @@ -718,11 +734,19 @@ void iscsit_free_cmd(struct iscsi_cmd *cmd) * associated cmd->se_cmd needs to be released. */ if (cmd->se_cmd.se_tfo != NULL) { - transport_generic_free_cmd(&cmd->se_cmd, 1); + se_cmd = &cmd->se_cmd; + __iscsit_free_cmd(cmd, true, shutdown); + + rc = transport_generic_free_cmd(&cmd->se_cmd, 1); + if (!rc && shutdown && se_cmd->se_sess) { + __iscsit_free_cmd(cmd, true, shutdown); + target_put_sess_cmd(se_cmd->se_sess, se_cmd); + } break; } /* Fall-through */ default: + __iscsit_free_cmd(cmd, false, shutdown); cmd->release_cmd(cmd); break; } diff --git a/drivers/target/iscsi/iscsi_target_util.h b/drivers/target/iscsi/iscsi_target_util.h index 4f8e01a47081..a4422659d049 100644 --- a/drivers/target/iscsi/iscsi_target_util.h +++ b/drivers/target/iscsi/iscsi_target_util.h @@ -29,7 +29,7 @@ extern void iscsit_remove_cmd_from_tx_queues(struct iscsi_cmd *, struct iscsi_co extern bool iscsit_conn_all_queues_empty(struct iscsi_conn *); extern void iscsit_free_queue_reqs_for_conn(struct iscsi_conn *); extern void iscsit_release_cmd(struct iscsi_cmd *); -extern void iscsit_free_cmd(struct iscsi_cmd *); +extern void iscsit_free_cmd(struct iscsi_cmd *, bool); extern int iscsit_check_session_usage_count(struct iscsi_session *); extern void iscsit_dec_session_usage_count(struct iscsi_session *); extern void iscsit_inc_session_usage_count(struct iscsi_session *); -- cgit v1.2.3 From df66834a43c461de2565c45d815288ba1c0def37 Mon Sep 17 00:00:00 2001 From: Finn Thain Date: Wed, 29 May 2013 12:37:17 +1000 Subject: m68k/mac: Fix unexpected interrupt with CONFIG_EARLY_PRINTK The present code does not wait for the SCC to finish resetting itself before trying to initialise the device. The result is that the SCC interrupt sources become enabled (if they weren't already). This leads to an early boot crash (unexpected interrupt) given CONFIG_EARLY_PRINTK. Fix this by adding a delay. A successful reset disables the interrupt sources. Also, after the reset for channel A setup, the SCC then gets a second reset for channel B setup which leaves channel A uninitialised again. Fix this by performing the reset only once. Signed-off-by: Finn Thain Cc: stable@vger.kernel.org Signed-off-by: Geert Uytterhoeven --- arch/m68k/kernel/head.S | 29 +++++++++++++++++++---------- 1 file changed, 19 insertions(+), 10 deletions(-) diff --git a/arch/m68k/kernel/head.S b/arch/m68k/kernel/head.S index d197e7ff62c5..ac85f16534af 100644 --- a/arch/m68k/kernel/head.S +++ b/arch/m68k/kernel/head.S @@ -2752,11 +2752,9 @@ func_return get_new_page #ifdef CONFIG_MAC L(scc_initable_mac): - .byte 9,12 /* Reset */ .byte 4,0x44 /* x16, 1 stopbit, no parity */ .byte 3,0xc0 /* receiver: 8 bpc */ .byte 5,0xe2 /* transmitter: 8 bpc, assert dtr/rts */ - .byte 9,0 /* no interrupts */ .byte 10,0 /* NRZ */ .byte 11,0x50 /* use baud rate generator */ .byte 12,1,13,0 /* 38400 baud */ @@ -2899,6 +2897,7 @@ func_start serial_init,%d0/%d1/%a0/%a1 is_not_mac(L(serial_init_not_mac)) #ifdef SERIAL_DEBUG + /* You may define either or both of these. */ #define MAC_USE_SCC_A /* Modem port */ #define MAC_USE_SCC_B /* Printer port */ @@ -2908,9 +2907,21 @@ func_start serial_init,%d0/%d1/%a0/%a1 #define mac_scc_cha_b_data_offset 0x4 #define mac_scc_cha_a_data_offset 0x6 +#if defined(MAC_USE_SCC_A) || defined(MAC_USE_SCC_B) + movel %pc@(L(mac_sccbase)),%a0 + /* Reset SCC device */ + moveb #9,%a0@(mac_scc_cha_a_ctrl_offset) + moveb #0xc0,%a0@(mac_scc_cha_a_ctrl_offset) + /* Wait for 5 PCLK cycles, which is about 68 CPU cycles */ + /* 5 / 3.6864 MHz = approx. 1.36 us = 68 / 50 MHz */ + movel #35,%d0 +5: + subq #1,%d0 + jne 5b +#endif + #ifdef MAC_USE_SCC_A /* Initialize channel A */ - movel %pc@(L(mac_sccbase)),%a0 lea %pc@(L(scc_initable_mac)),%a1 5: moveb %a1@+,%d0 jmi 6f @@ -2922,9 +2933,6 @@ func_start serial_init,%d0/%d1/%a0/%a1 #ifdef MAC_USE_SCC_B /* Initialize channel B */ -#ifndef MAC_USE_SCC_A /* Load mac_sccbase only if needed */ - movel %pc@(L(mac_sccbase)),%a0 -#endif /* MAC_USE_SCC_A */ lea %pc@(L(scc_initable_mac)),%a1 7: moveb %a1@+,%d0 jmi 8f @@ -2933,6 +2941,7 @@ func_start serial_init,%d0/%d1/%a0/%a1 jra 7b 8: #endif /* MAC_USE_SCC_B */ + #endif /* SERIAL_DEBUG */ jra L(serial_init_done) @@ -3006,17 +3015,17 @@ func_start serial_putc,%d0/%d1/%a0/%a1 #ifdef SERIAL_DEBUG -#ifdef MAC_USE_SCC_A +#if defined(MAC_USE_SCC_A) || defined(MAC_USE_SCC_B) movel %pc@(L(mac_sccbase)),%a1 +#endif + +#ifdef MAC_USE_SCC_A 3: btst #2,%a1@(mac_scc_cha_a_ctrl_offset) jeq 3b moveb %d0,%a1@(mac_scc_cha_a_data_offset) #endif /* MAC_USE_SCC_A */ #ifdef MAC_USE_SCC_B -#ifndef MAC_USE_SCC_A /* Load mac_sccbase only if needed */ - movel %pc@(L(mac_sccbase)),%a1 -#endif /* MAC_USE_SCC_A */ 4: btst #2,%a1@(mac_scc_cha_b_ctrl_offset) jeq 4b moveb %d0,%a1@(mac_scc_cha_b_data_offset) -- cgit v1.2.3 From 381cc2b9705512ee7c7f1839cbdde374625a2a9f Mon Sep 17 00:00:00 2001 From: Mark Rutland Date: Fri, 24 May 2013 12:02:35 +0100 Subject: arm64: treat unhandled compat el0 traps as undef Currently, if a compat process reads or writes from/to a disabled cp15/cp14 register, the trap is not handled by the el0_sync_compat handler, and the kernel will head to bad_mode, where it will die(), and oops(). For 64 bit processes, disabled system register accesses are currently treated as unhandled instructions. This patch modifies entry.S to treat these unhandled traps as undefined instructions, sending a SIGILL to userspace. This gives processes a chance to handle this and stop using inaccessible registers, and prevents further issues in the kernel as a result of the die(). Reported-by: Johannes Jensen Signed-off-by: Mark Rutland Signed-off-by: Catalin Marinas --- arch/arm64/kernel/entry.S | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/arch/arm64/kernel/entry.S b/arch/arm64/kernel/entry.S index c7e047049f2c..1d1314280a03 100644 --- a/arch/arm64/kernel/entry.S +++ b/arch/arm64/kernel/entry.S @@ -390,6 +390,16 @@ el0_sync_compat: b.eq el0_fpsimd_exc cmp x24, #ESR_EL1_EC_UNKNOWN // unknown exception in EL0 b.eq el0_undef + cmp x24, #ESR_EL1_EC_CP15_32 // CP15 MRC/MCR trap + b.eq el0_undef + cmp x24, #ESR_EL1_EC_CP15_64 // CP15 MRRC/MCRR trap + b.eq el0_undef + cmp x24, #ESR_EL1_EC_CP14_MR // CP14 MRC/MCR trap + b.eq el0_undef + cmp x24, #ESR_EL1_EC_CP14_LS // CP14 LDC/STC trap + b.eq el0_undef + cmp x24, #ESR_EL1_EC_CP14_64 // CP14 MRRC/MCRR trap + b.eq el0_undef cmp x24, #ESR_EL1_EC_BREAKPT_EL0 // debug exception in EL0 b.ge el0_dbg b el0_inv -- cgit v1.2.3 From 9955ac47f4ba1c95ecb6092aeaefb40a22e99268 Mon Sep 17 00:00:00 2001 From: Mark Rutland Date: Tue, 28 May 2013 15:54:15 +0100 Subject: arm64: don't kill the kernel on a bad esr from el0 Rather than completely killing the kernel if we receive an esr value we can't deal with in the el0 handlers, send the process a SIGILL and log the esr value in the hope that we can debug it. If we receive a bad esr from el1, we'll die() as before. Signed-off-by: Mark Rutland Signed-off-by: Catalin Marinas Cc: stable@vger.kernel.org --- arch/arm64/kernel/traps.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) diff --git a/arch/arm64/kernel/traps.c b/arch/arm64/kernel/traps.c index f1ff9bad00f7..f30852d28590 100644 --- a/arch/arm64/kernel/traps.c +++ b/arch/arm64/kernel/traps.c @@ -311,14 +311,20 @@ asmlinkage long do_ni_syscall(struct pt_regs *regs) */ asmlinkage void bad_mode(struct pt_regs *regs, int reason, unsigned int esr) { + siginfo_t info; + void __user *pc = (void __user *)instruction_pointer(regs); console_verbose(); pr_crit("Bad mode in %s handler detected, code 0x%08x\n", handler[reason], esr); + __show_regs(regs); + + info.si_signo = SIGILL; + info.si_errno = 0; + info.si_code = ILL_ILLOPC; + info.si_addr = pc; - die("Oops - bad mode", regs, 0); - local_irq_disable(); - panic("bad mode"); + arm64_notify_die("Oops - bad mode", regs, &info, 0); } void __pte_error(const char *file, int line, unsigned long val) -- cgit v1.2.3 From 8b811bae69cf30e0a9676d7dcafb0cf16f13b3bc Mon Sep 17 00:00:00 2001 From: Stefan Weinhuber Date: Tue, 28 May 2013 15:26:06 +0200 Subject: s390/dasd: fix handling of gone paths When a path is gone and dasd_generic_path_event is called with a PE_PATH_GONE event, we must assume that any I/O request on that subchannel is still running. This is unlike the dasd_generic_notify handler and the CIO_NO_PATH event, which implies that the subchannel has been cleared. If dasd_generic_path_event finds that the path has been the last usable path, it must not call dasd_generic_last_path_gone (which would reset the state of running requests), but just set the DASD_STOPPED_DC_WAIT bit. Signed-off-by: Stefan Weinhuber Signed-off-by: Martin Schwidefsky --- drivers/s390/block/dasd.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) diff --git a/drivers/s390/block/dasd.c b/drivers/s390/block/dasd.c index 4361d9772c42..d72a9216ee2e 100644 --- a/drivers/s390/block/dasd.c +++ b/drivers/s390/block/dasd.c @@ -3440,8 +3440,16 @@ void dasd_generic_path_event(struct ccw_device *cdev, int *path_event) device->path_data.opm &= ~eventlpm; device->path_data.ppm &= ~eventlpm; device->path_data.npm &= ~eventlpm; - if (oldopm && !device->path_data.opm) - dasd_generic_last_path_gone(device); + if (oldopm && !device->path_data.opm) { + dev_warn(&device->cdev->dev, + "No verified channel paths remain " + "for the device\n"); + DBF_DEV_EVENT(DBF_WARNING, device, + "%s", "last verified path gone"); + dasd_eer_write(device, NULL, DASD_EER_NOPATH); + dasd_device_set_stop_bits(device, + DASD_STOPPED_DC_WAIT); + } } if (path_event[chp] & PE_PATH_AVAILABLE) { device->path_data.opm &= ~eventlpm; -- cgit v1.2.3 From e86cbd8765bd2e1f9eeb209822449c9b1e5958cf Mon Sep 17 00:00:00 2001 From: Christian Borntraeger Date: Wed, 29 May 2013 13:08:39 +0200 Subject: s390/pgtable: Fix gmap notifier address The address of the gmap notifier was broken, resulting in unhandled validity intercepts in KVM. Fix the rmap->vmaddr to be on a segment boundary. Signed-off-by: Christian Borntraeger Signed-off-by: Martin Schwidefsky --- arch/s390/mm/pgtable.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/s390/mm/pgtable.c b/arch/s390/mm/pgtable.c index 18dc417aaf79..a938b548f07e 100644 --- a/arch/s390/mm/pgtable.c +++ b/arch/s390/mm/pgtable.c @@ -492,7 +492,7 @@ static int gmap_connect_pgtable(unsigned long address, unsigned long segment, mp = (struct gmap_pgtable *) page->index; rmap->gmap = gmap; rmap->entry = segment_ptr; - rmap->vmaddr = address; + rmap->vmaddr = address & PMD_MASK; spin_lock(&mm->page_table_lock); if (*segment_ptr == segment) { list_add(&rmap->list, &mp->mapper); -- cgit v1.2.3 From 5d477b6079619910dab882fa229cce1f14f86cf8 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Fri, 10 May 2013 14:04:11 +0200 Subject: vfs: Fix invalid ida_remove() call MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit When the group id of a shared mount is not allocated, the umount still tries to call mnt_release_group_id(), which eventually hits a kernel warning at ida_remove() spewing a message like: ida_remove called for id=0 which is not allocated. This patch fixes the bug simply checking the group id in the caller. Reported-by: Cristian Rodríguez Signed-off-by: Takashi Iwai Signed-off-by: Al Viro --- fs/pnode.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/fs/pnode.c b/fs/pnode.c index 3d2a7141b87a..9af0df15256e 100644 --- a/fs/pnode.c +++ b/fs/pnode.c @@ -83,7 +83,8 @@ static int do_make_slave(struct mount *mnt) if (peer_mnt == mnt) peer_mnt = NULL; } - if (IS_MNT_SHARED(mnt) && list_empty(&mnt->mnt_share)) + if (mnt->mnt_group_id && IS_MNT_SHARED(mnt) && + list_empty(&mnt->mnt_share)) mnt_release_group_id(mnt); list_del_init(&mnt->mnt_share); -- cgit v1.2.3 From 801d9d26bfd6e88e9cf0efbb30b649d1bdc15dcf Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Wed, 29 May 2013 13:26:53 +0100 Subject: fix buffer leak after "scsi: saner replacements for ->proc_info()" That patch failed to set proc_scsi_fops' .release method. Signed-off-by: Jan Beulich Signed-off-by: Al Viro --- drivers/scsi/scsi_proc.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/scsi/scsi_proc.c b/drivers/scsi/scsi_proc.c index db66357211ed..86f0c5d5c116 100644 --- a/drivers/scsi/scsi_proc.c +++ b/drivers/scsi/scsi_proc.c @@ -84,6 +84,7 @@ static int proc_scsi_host_open(struct inode *inode, struct file *file) static const struct file_operations proc_scsi_fops = { .open = proc_scsi_host_open, + .release = single_release, .read = seq_read, .llseek = seq_lseek, .write = proc_scsi_host_write -- cgit v1.2.3 From 1d7095c72d35eee4ebc28e66563e636b9adafeb2 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Fri, 17 May 2013 15:21:56 -0400 Subject: qnx6: qnx6_readdir() has a braino in pos calculation We want to mask lower 5 bits out, not leave only those and clear the rest... As it is, we end up always starting to read from the beginning of directory, no matter what the current position had been. Signed-off-by: Al Viro --- fs/qnx6/dir.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/qnx6/dir.c b/fs/qnx6/dir.c index 8798d065e400..afa6be6fc397 100644 --- a/fs/qnx6/dir.c +++ b/fs/qnx6/dir.c @@ -120,7 +120,7 @@ static int qnx6_readdir(struct file *filp, void *dirent, filldir_t filldir) struct inode *inode = file_inode(filp); struct super_block *s = inode->i_sb; struct qnx6_sb_info *sbi = QNX6_SB(s); - loff_t pos = filp->f_pos & (QNX6_DIR_ENTRY_SIZE - 1); + loff_t pos = filp->f_pos & ~(QNX6_DIR_ENTRY_SIZE - 1); unsigned long npages = dir_pages(inode); unsigned long n = pos >> PAGE_CACHE_SHIFT; unsigned start = (pos & ~PAGE_CACHE_MASK) / QNX6_DIR_ENTRY_SIZE; -- cgit v1.2.3 From 31abdab9c11bb1694ecd1476a7edbe8e964d94ac Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sat, 18 May 2013 02:38:52 -0400 Subject: hpfs: deadlock and race in directory lseek() For one thing, there's an ABBA deadlock on hpfs fs-wide lock and i_mutex in hpfs_dir_lseek() - there's a lot of methods that grab the former with the caller already holding the latter, so it must take i_mutex first. For another, locking the damn thing, carefully validating the offset, then dropping locks and assigning the offset is obviously racy. Moreover, we _must_ do hpfs_add_pos(), or the machinery in dnode.c won't modify the sucker on B-tree surgeries. Signed-off-by: Al Viro --- fs/hpfs/dir.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/fs/hpfs/dir.c b/fs/hpfs/dir.c index 546f6d39713a..834ac13c04b7 100644 --- a/fs/hpfs/dir.c +++ b/fs/hpfs/dir.c @@ -33,25 +33,27 @@ static loff_t hpfs_dir_lseek(struct file *filp, loff_t off, int whence) if (whence == SEEK_DATA || whence == SEEK_HOLE) return -EINVAL; + mutex_lock(&i->i_mutex); hpfs_lock(s); /*printk("dir lseek\n");*/ if (new_off == 0 || new_off == 1 || new_off == 11 || new_off == 12 || new_off == 13) goto ok; - mutex_lock(&i->i_mutex); pos = ((loff_t) hpfs_de_as_down_as_possible(s, hpfs_inode->i_dno) << 4) + 1; while (pos != new_off) { if (map_pos_dirent(i, &pos, &qbh)) hpfs_brelse4(&qbh); else goto fail; if (pos == 12) goto fail; } - mutex_unlock(&i->i_mutex); + hpfs_add_pos(i, &filp->f_pos); ok: + filp->f_pos = new_off; hpfs_unlock(s); - return filp->f_pos = new_off; -fail: mutex_unlock(&i->i_mutex); + return new_off; +fail: /*printk("illegal lseek: %016llx\n", new_off);*/ hpfs_unlock(s); + mutex_unlock(&i->i_mutex); return -ESPIPE; } -- cgit v1.2.3 From 448293aadb54ab38b9c053bf9f1eecafdc0ed214 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Wed, 22 May 2013 13:41:26 -0400 Subject: befs_readdir(): do not increment ->f_pos if filldir tells us to stop Signed-off-by: Al Viro --- fs/befs/linuxvfs.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/befs/linuxvfs.c b/fs/befs/linuxvfs.c index 8615ee89ab55..f95dddced968 100644 --- a/fs/befs/linuxvfs.c +++ b/fs/befs/linuxvfs.c @@ -265,8 +265,8 @@ befs_readdir(struct file *filp, void *dirent, filldir_t filldir) result = filldir(dirent, keybuf, keysize, filp->f_pos, (ino_t) value, d_type); } - - filp->f_pos++; + if (!result) + filp->f_pos++; befs_debug(sb, "<--- befs_readdir() filp->f_pos %Ld", filp->f_pos); -- cgit v1.2.3 From 65ac057bce426b4abdf42384c4e09e40a634df32 Mon Sep 17 00:00:00 2001 From: Richard Genoud Date: Fri, 31 May 2013 14:28:38 +0000 Subject: trivial: atmel_lcdfb: add missing error message When a too small framebuffer is given, the atmel_lcdfb_check_var silently fails. Adding an error message will save some head scratching. Signed-off-by: Richard Genoud Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD --- drivers/video/atmel_lcdfb.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/video/atmel_lcdfb.c b/drivers/video/atmel_lcdfb.c index 540909de6247..6e6491fb83b7 100644 --- a/drivers/video/atmel_lcdfb.c +++ b/drivers/video/atmel_lcdfb.c @@ -461,8 +461,11 @@ static int atmel_lcdfb_check_var(struct fb_var_screeninfo *var, if (info->fix.smem_len) { unsigned int smem_len = (var->xres_virtual * var->yres_virtual * ((var->bits_per_pixel + 7) / 8)); - if (smem_len > info->fix.smem_len) + if (smem_len > info->fix.smem_len) { + dev_err(dev, "Frame buffer is too small (%u) for screen size (need at least %u)\n", + info->fix.smem_len, smem_len); return -EINVAL; + } } /* Saturate vertical and horizontal timings at maximum values */ -- cgit v1.2.3 From 56c21b53ab071feb3ce93375a563ead745fa7105 Mon Sep 17 00:00:00 2001 From: Richard Genoud Date: Fri, 31 May 2013 15:49:35 +0000 Subject: atmel_lcdfb: blank the backlight on remove When removing atmel_lcdfb module, the backlight is unregistered but not blanked. (only for CONFIG_BACKLIGHT_ATMEL_LCDC case). This can result in the screen going full white depending on how the PWM is wired. Signed-off-by: Richard Genoud Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD --- drivers/video/atmel_lcdfb.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/drivers/video/atmel_lcdfb.c b/drivers/video/atmel_lcdfb.c index 6e6491fb83b7..effdb373b8db 100644 --- a/drivers/video/atmel_lcdfb.c +++ b/drivers/video/atmel_lcdfb.c @@ -223,8 +223,14 @@ static void init_backlight(struct atmel_lcdfb_info *sinfo) static void exit_backlight(struct atmel_lcdfb_info *sinfo) { - if (sinfo->backlight) - backlight_device_unregister(sinfo->backlight); + if (!sinfo->backlight) + return; + + if (sinfo->backlight->ops) { + sinfo->backlight->props.power = FB_BLANK_POWERDOWN; + sinfo->backlight->ops->update_status(sinfo->backlight); + } + backlight_device_unregister(sinfo->backlight); } #else -- cgit v1.2.3 From 4ad1f70ebcdb69393ce083f514bf4a4a3a3e65cb Mon Sep 17 00:00:00 2001 From: Al Viro Date: Thu, 23 May 2013 04:38:22 -0400 Subject: zoran: racy refcount handling in vm_ops ->open()/->close() worse, we lock ->resource_lock too late when we are destroying the final clonal VMA; the check for lack of other mappings of the same opened file can race with mmap(). Signed-off-by: Al Viro --- drivers/media/pci/zoran/zoran.h | 2 +- drivers/media/pci/zoran/zoran_driver.c | 15 ++++++++------- 2 files changed, 9 insertions(+), 8 deletions(-) diff --git a/drivers/media/pci/zoran/zoran.h b/drivers/media/pci/zoran/zoran.h index ca2754a3cd63..5e040085c2ff 100644 --- a/drivers/media/pci/zoran/zoran.h +++ b/drivers/media/pci/zoran/zoran.h @@ -176,7 +176,7 @@ struct zoran_fh; struct zoran_mapping { struct zoran_fh *fh; - int count; + atomic_t count; }; struct zoran_buffer { diff --git a/drivers/media/pci/zoran/zoran_driver.c b/drivers/media/pci/zoran/zoran_driver.c index 1168a84a737d..d133c30c3fdc 100644 --- a/drivers/media/pci/zoran/zoran_driver.c +++ b/drivers/media/pci/zoran/zoran_driver.c @@ -2803,8 +2803,7 @@ static void zoran_vm_open (struct vm_area_struct *vma) { struct zoran_mapping *map = vma->vm_private_data; - - map->count++; + atomic_inc(&map->count); } static void @@ -2815,7 +2814,7 @@ zoran_vm_close (struct vm_area_struct *vma) struct zoran *zr = fh->zr; int i; - if (--map->count > 0) + if (!atomic_dec_and_mutex_lock(&map->count, &zr->resource_lock)) return; dprintk(3, KERN_INFO "%s: %s - munmap(%s)\n", ZR_DEVNAME(zr), @@ -2828,14 +2827,16 @@ zoran_vm_close (struct vm_area_struct *vma) kfree(map); /* Any buffers still mapped? */ - for (i = 0; i < fh->buffers.num_buffers; i++) - if (fh->buffers.buffer[i].map) + for (i = 0; i < fh->buffers.num_buffers; i++) { + if (fh->buffers.buffer[i].map) { + mutex_unlock(&zr->resource_lock); return; + } + } dprintk(3, KERN_INFO "%s: %s - free %s buffers\n", ZR_DEVNAME(zr), __func__, mode_name(fh->map_mode)); - mutex_lock(&zr->resource_lock); if (fh->map_mode == ZORAN_MAP_MODE_RAW) { if (fh->buffers.active != ZORAN_FREE) { @@ -2939,7 +2940,7 @@ zoran_mmap (struct file *file, goto mmap_unlock_and_return; } map->fh = fh; - map->count = 1; + atomic_set(&map->count, 1); vma->vm_ops = &zoran_vm_ops; vma->vm_flags |= VM_DONTEXPAND; -- cgit v1.2.3 From 0bdc7acba56a7ca4232f15f37b16f7ec079385ab Mon Sep 17 00:00:00 2001 From: Jeff Mahoney Date: Fri, 31 May 2013 15:07:52 -0400 Subject: reiserfs: fix spurious multiple-fill in reiserfs_readdir_dentry After sleeping for filldir(), we check to see if the file system has changed and research. The next_pos pointer is updated but its value isn't pushed into the key used for the search itself. As a result, the search returns the same item that the last cycle of the loop did and filldir() is called multiple times with the same data. The end result is that the buffer can contain the same name multiple times. This can be returned to userspace or used internally in the xattr code where it can manifest with the following warning: jdm-20004 reiserfs_delete_xattrs: Couldn't delete all xattrs (-2) reiserfs_for_each_xattr uses reiserfs_readdir_dentry to iterate over the xattr names and ends up trying to unlink the same name twice. The second attempt fails with -ENOENT and the error is returned. At some point I'll need to add support into reiserfsck to remove the orphaned directories left behind when this occurs. The fix is to push the value into the key before researching. Signed-off-by: Jeff Mahoney Signed-off-by: Jan Kara --- fs/reiserfs/dir.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/fs/reiserfs/dir.c b/fs/reiserfs/dir.c index 66c53b642a88..6c2d136561cb 100644 --- a/fs/reiserfs/dir.c +++ b/fs/reiserfs/dir.c @@ -204,6 +204,8 @@ int reiserfs_readdir_dentry(struct dentry *dentry, void *dirent, next_pos = deh_offset(deh) + 1; if (item_moved(&tmp_ih, &path_to_entry)) { + set_cpu_key_k_offset(&pos_key, + next_pos); goto research; } } /* for */ -- cgit v1.2.3 From 4a8570112b76a63ad21cfcbe2783f98f7fd5ba1b Mon Sep 17 00:00:00 2001 From: Jeff Mahoney Date: Fri, 31 May 2013 15:54:17 -0400 Subject: reiserfs: fix problems with chowning setuid file w/ xattrs reiserfs_chown_xattrs() takes the iattr struct passed into ->setattr and uses it to iterate over all the attrs associated with a file to change ownership of xattrs (and transfer quota associated with the xattr files). When the setuid bit is cleared during chown, ATTR_MODE and iattr->ia_mode are passed to all the xattrs as well. This means that the xattr directory will have S_IFREG added to its mode bits. This has been prevented in practice by a missing IS_PRIVATE check in reiserfs_acl_chmod, which caused a double-lock to occur while holding the write lock. Since the file system was completely locked up, the writeout of the corrupted mode never happened. This patch temporarily clears everything but ATTR_UID|ATTR_GID for the calls to reiserfs_setattr and adds the missing IS_PRIVATE check. Signed-off-by: Jeff Mahoney Signed-off-by: Jan Kara --- fs/reiserfs/xattr.c | 14 +++++++++++++- fs/reiserfs/xattr_acl.c | 3 +++ 2 files changed, 16 insertions(+), 1 deletion(-) diff --git a/fs/reiserfs/xattr.c b/fs/reiserfs/xattr.c index 4cce1d9552fb..821bcf70e467 100644 --- a/fs/reiserfs/xattr.c +++ b/fs/reiserfs/xattr.c @@ -318,7 +318,19 @@ static int delete_one_xattr(struct dentry *dentry, void *data) static int chown_one_xattr(struct dentry *dentry, void *data) { struct iattr *attrs = data; - return reiserfs_setattr(dentry, attrs); + int ia_valid = attrs->ia_valid; + int err; + + /* + * We only want the ownership bits. Otherwise, we'll do + * things like change a directory to a regular file if + * ATTR_MODE is set. + */ + attrs->ia_valid &= (ATTR_UID|ATTR_GID); + err = reiserfs_setattr(dentry, attrs); + attrs->ia_valid = ia_valid; + + return err; } /* No i_mutex, but the inode is unconnected. */ diff --git a/fs/reiserfs/xattr_acl.c b/fs/reiserfs/xattr_acl.c index d7c01ef64eda..6c8767fdfc6a 100644 --- a/fs/reiserfs/xattr_acl.c +++ b/fs/reiserfs/xattr_acl.c @@ -443,6 +443,9 @@ int reiserfs_acl_chmod(struct inode *inode) int depth; int error; + if (IS_PRIVATE(inode)) + return 0; + if (S_ISLNK(inode->i_mode)) return -EOPNOTSUPP; -- cgit v1.2.3 From a1457c0ce976bad1356b9b0437f2a5c3ab8a9cfc Mon Sep 17 00:00:00 2001 From: Jeff Mahoney Date: Fri, 31 May 2013 15:51:17 -0400 Subject: reiserfs: fix deadlock with nfs racing on create/lookup Reiserfs is currently able to be deadlocked by having two NFS clients where one has removed and recreated a file and another is accessing the file with an open file handle. If one client deletes and recreates a file with timing such that the recreated file obtains the same [dirid, objectid] pair as the original file while another client accesses the file via file handle, the create and lookup can race and deadlock if the lookup manages to create the in-memory inode first. The create thread, in insert_inode_locked4, will hold the write lock while waiting on the other inode to be unlocked. The lookup thread, anywhere in the iget path, will release and reacquire the write lock while it schedules. If it needs to reacquire the lock while the create thread has it, it will never be able to make forward progress because it needs to reacquire the lock before ultimately unlocking the inode. This patch drops the write lock across the insert_inode_locked4 call so that the ordering of inode_wait -> write lock is retained. Since this would have been the case before the BKL push-down, this is safe. Signed-off-by: Jeff Mahoney Signed-off-by: Jan Kara --- fs/reiserfs/inode.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/fs/reiserfs/inode.c b/fs/reiserfs/inode.c index 77d6d47abc83..f844533792ee 100644 --- a/fs/reiserfs/inode.c +++ b/fs/reiserfs/inode.c @@ -1811,11 +1811,16 @@ int reiserfs_new_inode(struct reiserfs_transaction_handle *th, TYPE_STAT_DATA, SD_SIZE, MAX_US_INT); memcpy(INODE_PKEY(inode), &(ih.ih_key), KEY_SIZE); args.dirid = le32_to_cpu(ih.ih_key.k_dir_id); - if (insert_inode_locked4(inode, args.objectid, - reiserfs_find_actor, &args) < 0) { + + reiserfs_write_unlock(inode->i_sb); + err = insert_inode_locked4(inode, args.objectid, + reiserfs_find_actor, &args); + reiserfs_write_lock(inode->i_sb); + if (err) { err = -EINVAL; goto out_bad_inode; } + if (old_format_only(sb)) /* not a perfect generation count, as object ids can be reused, but ** this is as good as reiserfs can do right now. -- cgit v1.2.3 From 35f7097fcedec63fcba1852dbee96f74a2d90878 Mon Sep 17 00:00:00 2001 From: Michael Neuling Date: Sun, 26 May 2013 18:09:37 +0000 Subject: powerpc/tm: Make room for hypervisor in abort cause codes PAPR carves out 0xff-0xe0 for hypervisor use of transactional memory software abort cause codes. Unfortunately we don't respect this currently. Below fixes this to move our cause codes to below this region. Signed-off-by: Michael Neuling Cc: # 3.9 only Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/reg.h | 15 ++++++++------- 1 file changed, 8 insertions(+), 7 deletions(-) diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h index a6136515c7f2..8f6a94b2dc99 100644 --- a/arch/powerpc/include/asm/reg.h +++ b/arch/powerpc/include/asm/reg.h @@ -113,14 +113,15 @@ /* Reason codes describing kernel causes for transaction aborts. By convention, bit0 is copied to TEXASR[56] (IBM bit 7) which is set if - the failure is persistent. + the failure is persistent. PAPR saves 0xff-0xe0 for the hypervisor. */ -#define TM_CAUSE_RESCHED 0xfe -#define TM_CAUSE_TLBI 0xfc -#define TM_CAUSE_FAC_UNAV 0xfa -#define TM_CAUSE_SYSCALL 0xf9 /* Persistent */ -#define TM_CAUSE_MISC 0xf6 -#define TM_CAUSE_SIGNAL 0xf4 +#define TM_CAUSE_PERSISTENT 0x01 +#define TM_CAUSE_RESCHED 0xde +#define TM_CAUSE_TLBI 0xdc +#define TM_CAUSE_FAC_UNAV 0xda +#define TM_CAUSE_SYSCALL 0xd8 /* future use */ +#define TM_CAUSE_MISC 0xd6 /* future use */ +#define TM_CAUSE_SIGNAL 0xd4 #if defined(CONFIG_PPC_BOOK3S_64) #define MSR_64BIT MSR_SF -- cgit v1.2.3 From 24b92375dc4ec8a15262e8aaaab60b7404d4b1e7 Mon Sep 17 00:00:00 2001 From: Michael Neuling Date: Sun, 26 May 2013 18:09:38 +0000 Subject: powerpc/tm: Update cause codes documentation Signed-off-by: Michael Neuling Cc: # 3.9 only Signed-off-by: Benjamin Herrenschmidt --- Documentation/powerpc/transactional_memory.txt | 1 + 1 file changed, 1 insertion(+) diff --git a/Documentation/powerpc/transactional_memory.txt b/Documentation/powerpc/transactional_memory.txt index c907be41d60f..84e04a0db0f8 100644 --- a/Documentation/powerpc/transactional_memory.txt +++ b/Documentation/powerpc/transactional_memory.txt @@ -155,6 +155,7 @@ These are defined in , and distinguish different reasons why the kernel aborted a transaction: TM_CAUSE_RESCHED Thread was rescheduled. + TM_CAUSE_TLBI Software TLB invalide. TM_CAUSE_FAC_UNAV FP/VEC/VSX unavailable trap. TM_CAUSE_SYSCALL Currently unused; future syscalls that must abort transactions for consistency will use this. -- cgit v1.2.3 From 6ce6c629fd8254b3177650de99699682ff7f6707 Mon Sep 17 00:00:00 2001 From: Michael Neuling Date: Sun, 26 May 2013 18:09:39 +0000 Subject: powerpc/tm: Abort on emulation and alignment faults If we are emulating an instruction inside an active user transaction that touches memory, the kernel can't emulate it as it operates in transactional suspend context. We need to abort these transactions and send them back to userspace for the hardware to rollback. We can service these if the user transaction is in suspend mode, since the kernel will operate in the same suspend context. This adds a check to all alignment faults and to specific instruction emulations (only string instructions for now). If the user process is in an active (non-suspended) transaction, we abort the transaction go back to userspace allowing the HW to roll back the transaction and tell the user of the failure. This also adds new tm abort cause codes to report the reason of the persistent error to the user. Crappy test case here http://neuling.org/devel/junkcode/aligntm.c Signed-off-by: Michael Neuling Cc: # v3.9 Signed-off-by: Benjamin Herrenschmidt --- Documentation/powerpc/transactional_memory.txt | 7 +++++-- arch/powerpc/include/asm/reg.h | 2 ++ arch/powerpc/kernel/traps.c | 29 ++++++++++++++++++++++++++ 3 files changed, 36 insertions(+), 2 deletions(-) diff --git a/Documentation/powerpc/transactional_memory.txt b/Documentation/powerpc/transactional_memory.txt index 84e04a0db0f8..c54bf3127651 100644 --- a/Documentation/powerpc/transactional_memory.txt +++ b/Documentation/powerpc/transactional_memory.txt @@ -161,9 +161,12 @@ kernel aborted a transaction: transactions for consistency will use this. TM_CAUSE_SIGNAL Signal delivered. TM_CAUSE_MISC Currently unused. + TM_CAUSE_ALIGNMENT Alignment fault. + TM_CAUSE_EMULATE Emulation that touched memory. -These can be checked by the user program's abort handler as TEXASR[0:7]. - +These can be checked by the user program's abort handler as TEXASR[0:7]. If +bit 7 is set, it indicates that the error is consider persistent. For example +a TM_CAUSE_ALIGNMENT will be persistent while a TM_CAUSE_RESCHED will not.q GDB === diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h index 8f6a94b2dc99..d0528e0d6db8 100644 --- a/arch/powerpc/include/asm/reg.h +++ b/arch/powerpc/include/asm/reg.h @@ -122,6 +122,8 @@ #define TM_CAUSE_SYSCALL 0xd8 /* future use */ #define TM_CAUSE_MISC 0xd6 /* future use */ #define TM_CAUSE_SIGNAL 0xd4 +#define TM_CAUSE_ALIGNMENT 0xd2 +#define TM_CAUSE_EMULATE 0xd0 #if defined(CONFIG_PPC_BOOK3S_64) #define MSR_64BIT MSR_SF diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c index a7a648f6b750..f18c79c324ef 100644 --- a/arch/powerpc/kernel/traps.c +++ b/arch/powerpc/kernel/traps.c @@ -53,6 +53,7 @@ #ifdef CONFIG_PPC64 #include #include +#include #endif #include #include @@ -932,6 +933,28 @@ static int emulate_isel(struct pt_regs *regs, u32 instword) return 0; } +#ifdef CONFIG_PPC_TRANSACTIONAL_MEM +static inline bool tm_abort_check(struct pt_regs *regs, int cause) +{ + /* If we're emulating a load/store in an active transaction, we cannot + * emulate it as the kernel operates in transaction suspended context. + * We need to abort the transaction. This creates a persistent TM + * abort so tell the user what caused it with a new code. + */ + if (MSR_TM_TRANSACTIONAL(regs->msr)) { + tm_enable(); + tm_abort(cause); + return true; + } + return false; +} +#else +static inline bool tm_abort_check(struct pt_regs *regs, int reason) +{ + return false; +} +#endif + static int emulate_instruction(struct pt_regs *regs) { u32 instword; @@ -971,6 +994,9 @@ static int emulate_instruction(struct pt_regs *regs) /* Emulate load/store string insn. */ if ((instword & PPC_INST_STRING_GEN_MASK) == PPC_INST_STRING) { + if (tm_abort_check(regs, + TM_CAUSE_EMULATE | TM_CAUSE_PERSISTENT)) + return -EINVAL; PPC_WARN_EMULATED(string, regs); return emulate_string_inst(regs, instword); } @@ -1148,6 +1174,9 @@ void alignment_exception(struct pt_regs *regs) if (!arch_irq_disabled_regs(regs)) local_irq_enable(); + if (tm_abort_check(regs, TM_CAUSE_ALIGNMENT | TM_CAUSE_PERSISTENT)) + goto bail; + /* we don't implement logging of alignment exceptions */ if (!(current->thread.align_ctl & PR_UNALIGN_SIGBUS)) fixed = fix_alignment(regs); -- cgit v1.2.3 From b75c100ef24894bd2c8b52e123bcc5f191c5d9fd Mon Sep 17 00:00:00 2001 From: Michael Neuling Date: Sun, 26 May 2013 18:30:56 +0000 Subject: powerpc/tm: Move TM abort cause codes to uapi These cause codes are usable by userspace, so let's export to uapi. Signed-off-by: Michael Neuling Cc: # v3.9 Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/reg.h | 14 -------------- arch/powerpc/include/asm/tm.h | 2 ++ arch/powerpc/include/uapi/asm/Kbuild | 1 + arch/powerpc/include/uapi/asm/tm.h | 18 ++++++++++++++++++ 4 files changed, 21 insertions(+), 14 deletions(-) create mode 100644 arch/powerpc/include/uapi/asm/tm.h diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h index d0528e0d6db8..4a9e408644fe 100644 --- a/arch/powerpc/include/asm/reg.h +++ b/arch/powerpc/include/asm/reg.h @@ -111,20 +111,6 @@ #define MSR_TM_TRANSACTIONAL(x) (((x) & MSR_TS_MASK) == MSR_TS_T) #define MSR_TM_SUSPENDED(x) (((x) & MSR_TS_MASK) == MSR_TS_S) -/* Reason codes describing kernel causes for transaction aborts. By - convention, bit0 is copied to TEXASR[56] (IBM bit 7) which is set if - the failure is persistent. PAPR saves 0xff-0xe0 for the hypervisor. -*/ -#define TM_CAUSE_PERSISTENT 0x01 -#define TM_CAUSE_RESCHED 0xde -#define TM_CAUSE_TLBI 0xdc -#define TM_CAUSE_FAC_UNAV 0xda -#define TM_CAUSE_SYSCALL 0xd8 /* future use */ -#define TM_CAUSE_MISC 0xd6 /* future use */ -#define TM_CAUSE_SIGNAL 0xd4 -#define TM_CAUSE_ALIGNMENT 0xd2 -#define TM_CAUSE_EMULATE 0xd0 - #if defined(CONFIG_PPC_BOOK3S_64) #define MSR_64BIT MSR_SF diff --git a/arch/powerpc/include/asm/tm.h b/arch/powerpc/include/asm/tm.h index 4b4449abf3f8..9dfbc34bdbf5 100644 --- a/arch/powerpc/include/asm/tm.h +++ b/arch/powerpc/include/asm/tm.h @@ -5,6 +5,8 @@ * Copyright 2012 Matt Evans & Michael Neuling, IBM Corporation. */ +#include + #ifdef CONFIG_PPC_TRANSACTIONAL_MEM extern void do_load_up_transact_fpu(struct thread_struct *thread); extern void do_load_up_transact_altivec(struct thread_struct *thread); diff --git a/arch/powerpc/include/uapi/asm/Kbuild b/arch/powerpc/include/uapi/asm/Kbuild index f7bca6370745..5182c8622b54 100644 --- a/arch/powerpc/include/uapi/asm/Kbuild +++ b/arch/powerpc/include/uapi/asm/Kbuild @@ -40,6 +40,7 @@ header-y += statfs.h header-y += swab.h header-y += termbits.h header-y += termios.h +header-y += tm.h header-y += types.h header-y += ucontext.h header-y += unistd.h diff --git a/arch/powerpc/include/uapi/asm/tm.h b/arch/powerpc/include/uapi/asm/tm.h new file mode 100644 index 000000000000..85059a00f560 --- /dev/null +++ b/arch/powerpc/include/uapi/asm/tm.h @@ -0,0 +1,18 @@ +#ifndef _ASM_POWERPC_TM_H +#define _ASM_POWERPC_TM_H + +/* Reason codes describing kernel causes for transaction aborts. By + * convention, bit0 is copied to TEXASR[56] (IBM bit 7) which is set if + * the failure is persistent. PAPR saves 0xff-0xe0 for the hypervisor. + */ +#define TM_CAUSE_PERSISTENT 0x01 +#define TM_CAUSE_RESCHED 0xde +#define TM_CAUSE_TLBI 0xdc +#define TM_CAUSE_FAC_UNAV 0xda +#define TM_CAUSE_SYSCALL 0xd8 /* future use */ +#define TM_CAUSE_MISC 0xd6 /* future use */ +#define TM_CAUSE_SIGNAL 0xd4 +#define TM_CAUSE_ALIGNMENT 0xd2 +#define TM_CAUSE_EMULATE 0xd0 + +#endif -- cgit v1.2.3 From 2b3f8e87cf99a33fb6faf5026d7147748bbd77b6 Mon Sep 17 00:00:00 2001 From: Michael Neuling Date: Sun, 26 May 2013 18:09:41 +0000 Subject: powerpc/tm: Fix userspace stack corruption on signal delivery for active transactions When in an active transaction that takes a signal, we need to be careful with the stack. It's possible that the stack has moved back up after the tbegin. The obvious case here is when the tbegin is called inside a function that returns before a tend. In this case, the stack is part of the checkpointed transactional memory state. If we write over this non transactionally or in suspend, we are in trouble because if we get a tm abort, the program counter and stack pointer will be back at the tbegin but our in memory stack won't be valid anymore. To avoid this, when taking a signal in an active transaction, we need to use the stack pointer from the checkpointed state, rather than the speculated state. This ensures that the signal context (written tm suspended) will be written below the stack required for the rollback. The transaction is aborted becuase of the treclaim, so any memory written between the tbegin and the signal will be rolled back anyway. For signals taken in non-TM or suspended mode, we use the normal/non-checkpointed stack pointer. Tested with 64 and 32 bit signals Signed-off-by: Michael Neuling Cc: # v3.9 Signed-off-by: Benjamin Herrenschmidt --- Documentation/powerpc/transactional_memory.txt | 19 ++++++++++++ arch/powerpc/include/asm/processor.h | 13 +++------ arch/powerpc/include/asm/signal.h | 3 ++ arch/powerpc/kernel/signal.c | 40 ++++++++++++++++++++++++-- arch/powerpc/kernel/signal.h | 2 +- arch/powerpc/kernel/signal_32.c | 10 ++----- arch/powerpc/kernel/signal_64.c | 23 +++++---------- 7 files changed, 74 insertions(+), 36 deletions(-) diff --git a/Documentation/powerpc/transactional_memory.txt b/Documentation/powerpc/transactional_memory.txt index c54bf3127651..dc23e58ae264 100644 --- a/Documentation/powerpc/transactional_memory.txt +++ b/Documentation/powerpc/transactional_memory.txt @@ -147,6 +147,25 @@ Example signal handler: fix_the_problem(ucp->dar); } +When in an active transaction that takes a signal, we need to be careful with +the stack. It's possible that the stack has moved back up after the tbegin. +The obvious case here is when the tbegin is called inside a function that +returns before a tend. In this case, the stack is part of the checkpointed +transactional memory state. If we write over this non transactionally or in +suspend, we are in trouble because if we get a tm abort, the program counter and +stack pointer will be back at the tbegin but our in memory stack won't be valid +anymore. + +To avoid this, when taking a signal in an active transaction, we need to use +the stack pointer from the checkpointed state, rather than the speculated +state. This ensures that the signal context (written tm suspended) will be +written below the stack required for the rollback. The transaction is aborted +becuase of the treclaim, so any memory written between the tbegin and the +signal will be rolled back anyway. + +For signals taken in non-TM or suspended mode, we use the +normal/non-checkpointed stack pointer. + Failure cause codes used by kernel ================================== diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h index 594db6bc093c..14a658363698 100644 --- a/arch/powerpc/include/asm/processor.h +++ b/arch/powerpc/include/asm/processor.h @@ -409,21 +409,16 @@ static inline void prefetchw(const void *x) #endif #ifdef CONFIG_PPC64 -static inline unsigned long get_clean_sp(struct pt_regs *regs, int is_32) +static inline unsigned long get_clean_sp(unsigned long sp, int is_32) { - unsigned long sp; - if (is_32) - sp = regs->gpr[1] & 0x0ffffffffUL; - else - sp = regs->gpr[1]; - + return sp & 0x0ffffffffUL; return sp; } #else -static inline unsigned long get_clean_sp(struct pt_regs *regs, int is_32) +static inline unsigned long get_clean_sp(unsigned long sp, int is_32) { - return regs->gpr[1]; + return sp; } #endif diff --git a/arch/powerpc/include/asm/signal.h b/arch/powerpc/include/asm/signal.h index fbe66c463891..9322c28aebd2 100644 --- a/arch/powerpc/include/asm/signal.h +++ b/arch/powerpc/include/asm/signal.h @@ -3,5 +3,8 @@ #define __ARCH_HAS_SA_RESTORER #include +#include + +extern unsigned long get_tm_stackpointer(struct pt_regs *regs); #endif /* _ASM_POWERPC_SIGNAL_H */ diff --git a/arch/powerpc/kernel/signal.c b/arch/powerpc/kernel/signal.c index 577a8aa69c6e..457e97aa2945 100644 --- a/arch/powerpc/kernel/signal.c +++ b/arch/powerpc/kernel/signal.c @@ -18,6 +18,7 @@ #include #include #include +#include #include "signal.h" @@ -30,13 +31,13 @@ int show_unhandled_signals = 1; /* * Allocate space for the signal frame */ -void __user * get_sigframe(struct k_sigaction *ka, struct pt_regs *regs, +void __user * get_sigframe(struct k_sigaction *ka, unsigned long sp, size_t frame_size, int is_32) { unsigned long oldsp, newsp; /* Default to using normal stack */ - oldsp = get_clean_sp(regs, is_32); + oldsp = get_clean_sp(sp, is_32); /* Check for alt stack */ if ((ka->sa.sa_flags & SA_ONSTACK) && @@ -175,3 +176,38 @@ void do_notify_resume(struct pt_regs *regs, unsigned long thread_info_flags) user_enter(); } + +unsigned long get_tm_stackpointer(struct pt_regs *regs) +{ + /* When in an active transaction that takes a signal, we need to be + * careful with the stack. It's possible that the stack has moved back + * up after the tbegin. The obvious case here is when the tbegin is + * called inside a function that returns before a tend. In this case, + * the stack is part of the checkpointed transactional memory state. + * If we write over this non transactionally or in suspend, we are in + * trouble because if we get a tm abort, the program counter and stack + * pointer will be back at the tbegin but our in memory stack won't be + * valid anymore. + * + * To avoid this, when taking a signal in an active transaction, we + * need to use the stack pointer from the checkpointed state, rather + * than the speculated state. This ensures that the signal context + * (written tm suspended) will be written below the stack required for + * the rollback. The transaction is aborted becuase of the treclaim, + * so any memory written between the tbegin and the signal will be + * rolled back anyway. + * + * For signals taken in non-TM or suspended mode, we use the + * normal/non-checkpointed stack pointer. + */ + +#ifdef CONFIG_PPC_TRANSACTIONAL_MEM + if (MSR_TM_ACTIVE(regs->msr)) { + tm_enable(); + tm_reclaim(¤t->thread, regs->msr, TM_CAUSE_SIGNAL); + if (MSR_TM_TRANSACTIONAL(regs->msr)) + return current->thread.ckpt_regs.gpr[1]; + } +#endif + return regs->gpr[1]; +} diff --git a/arch/powerpc/kernel/signal.h b/arch/powerpc/kernel/signal.h index ec84c901ceab..c69b9aeb9f23 100644 --- a/arch/powerpc/kernel/signal.h +++ b/arch/powerpc/kernel/signal.h @@ -12,7 +12,7 @@ extern void do_notify_resume(struct pt_regs *regs, unsigned long thread_info_flags); -extern void __user * get_sigframe(struct k_sigaction *ka, struct pt_regs *regs, +extern void __user * get_sigframe(struct k_sigaction *ka, unsigned long sp, size_t frame_size, int is_32); extern int handle_signal32(unsigned long sig, struct k_sigaction *ka, diff --git a/arch/powerpc/kernel/signal_32.c b/arch/powerpc/kernel/signal_32.c index 95068bf569ad..201385c3a1ae 100644 --- a/arch/powerpc/kernel/signal_32.c +++ b/arch/powerpc/kernel/signal_32.c @@ -503,12 +503,6 @@ static int save_tm_user_regs(struct pt_regs *regs, { unsigned long msr = regs->msr; - /* tm_reclaim rolls back all reg states, updating thread.ckpt_regs, - * thread.transact_fpr[], thread.transact_vr[], etc. - */ - tm_enable(); - tm_reclaim(¤t->thread, msr, TM_CAUSE_SIGNAL); - /* Make sure floating point registers are stored in regs */ flush_fp_to_thread(current); @@ -965,7 +959,7 @@ int handle_rt_signal32(unsigned long sig, struct k_sigaction *ka, /* Set up Signal Frame */ /* Put a Real Time Context onto stack */ - rt_sf = get_sigframe(ka, regs, sizeof(*rt_sf), 1); + rt_sf = get_sigframe(ka, get_tm_stackpointer(regs), sizeof(*rt_sf), 1); addr = rt_sf; if (unlikely(rt_sf == NULL)) goto badframe; @@ -1403,7 +1397,7 @@ int handle_signal32(unsigned long sig, struct k_sigaction *ka, unsigned long tramp; /* Set up Signal Frame */ - frame = get_sigframe(ka, regs, sizeof(*frame), 1); + frame = get_sigframe(ka, get_tm_stackpointer(regs), sizeof(*frame), 1); if (unlikely(frame == NULL)) goto badframe; sc = (struct sigcontext __user *) &frame->sctx; diff --git a/arch/powerpc/kernel/signal_64.c b/arch/powerpc/kernel/signal_64.c index c1794286098c..345947367ec0 100644 --- a/arch/powerpc/kernel/signal_64.c +++ b/arch/powerpc/kernel/signal_64.c @@ -154,11 +154,12 @@ static long setup_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs, * As above, but Transactional Memory is in use, so deliver sigcontexts * containing checkpointed and transactional register states. * - * To do this, we treclaim to gather both sets of registers and set up the - * 'normal' sigcontext registers with rolled-back register values such that a - * simple signal handler sees a correct checkpointed register state. - * If interested, a TM-aware sighandler can examine the transactional registers - * in the 2nd sigcontext to determine the real origin of the signal. + * To do this, we treclaim (done before entering here) to gather both sets of + * registers and set up the 'normal' sigcontext registers with rolled-back + * register values such that a simple signal handler sees a correct + * checkpointed register state. If interested, a TM-aware sighandler can + * examine the transactional registers in the 2nd sigcontext to determine the + * real origin of the signal. */ static long setup_tm_sigcontexts(struct sigcontext __user *sc, struct sigcontext __user *tm_sc, @@ -184,16 +185,6 @@ static long setup_tm_sigcontexts(struct sigcontext __user *sc, BUG_ON(!MSR_TM_ACTIVE(regs->msr)); - /* tm_reclaim rolls back all reg states, saving checkpointed (older) - * GPRs to thread.ckpt_regs and (if used) FPRs to (newer) - * thread.transact_fp and/or VRs to (newer) thread.transact_vr. - * THEN we save out FP/VRs, if necessary, to the checkpointed (older) - * thread.fr[]/vr[]s. The transactional (newer) GPRs are on the - * stack, in *regs. - */ - tm_enable(); - tm_reclaim(¤t->thread, msr, TM_CAUSE_SIGNAL); - flush_fp_to_thread(current); #ifdef CONFIG_ALTIVEC @@ -711,7 +702,7 @@ int handle_rt_signal64(int signr, struct k_sigaction *ka, siginfo_t *info, unsigned long newsp = 0; long err = 0; - frame = get_sigframe(ka, regs, sizeof(*frame), 0); + frame = get_sigframe(ka, get_tm_stackpointer(regs), sizeof(*frame), 0); if (unlikely(frame == NULL)) goto badframe; -- cgit v1.2.3 From e242114afff0a41550e174cd787cdbafd34625de Mon Sep 17 00:00:00 2001 From: chenhui zhao Date: Mon, 27 May 2013 21:59:43 +0000 Subject: powerpc/mpic: Fix irq distribution problem when MPIC_SINGLE_DEST_CPU For the mpic with a flag MPIC_SINGLE_DEST_CPU, only one bit should be set in interrupt destination registers. The code is applicable to 64-bit platforms as well as 32-bit. Signed-off-by: Zhao Chenhui Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/sysdev/mpic.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c index 0a13ecb270c7..3cc2f9159ab1 100644 --- a/arch/powerpc/sysdev/mpic.c +++ b/arch/powerpc/sysdev/mpic.c @@ -54,7 +54,7 @@ static DEFINE_RAW_SPINLOCK(mpic_lock); #ifdef CONFIG_PPC32 /* XXX for now */ #ifdef CONFIG_IRQ_ALL_CPUS -#define distribute_irqs (!(mpic->flags & MPIC_SINGLE_DEST_CPU)) +#define distribute_irqs (1) #else #define distribute_irqs (0) #endif @@ -1703,7 +1703,7 @@ void mpic_setup_this_cpu(void) * it differently, then we should make sure we also change the default * values of irq_desc[].affinity in irq.c. */ - if (distribute_irqs) { + if (distribute_irqs && !(mpic->flags & MPIC_SINGLE_DEST_CPU)) { for (i = 0; i < mpic->num_sources ; i++) mpic_irq_write(i, MPIC_INFO(IRQ_DESTINATION), mpic_irq_read(i, MPIC_INFO(IRQ_DESTINATION)) | msk); -- cgit v1.2.3 From 2ac6f427ad837a69561160b282eff80d9f0c2466 Mon Sep 17 00:00:00 2001 From: Nishanth Aravamudan Date: Tue, 28 May 2013 10:39:50 +0000 Subject: powerpc/cputable: Fix oprofile_cpu_type on power8 Maynard informed me that neither the oprofile kernel module nor oprofile userspace has been updated to support that "legacy" oprofile module interface for power8, which is indicated by "ppc64/power8." This results in no samples. The solution is to default to the "timer" type, instead. The raw entry also should be updated, as "ppc64/ibm-compat-v1" indicates to oprofile userspace to use "compatibility events" which are obsolete in ISA 2.07. Signed-off-by: Nishanth Aravamudan Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/cputable.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c index c60bbec25c1f..b8808bcb9e4e 100644 --- a/arch/powerpc/kernel/cputable.c +++ b/arch/powerpc/kernel/cputable.c @@ -453,7 +453,7 @@ static struct cpu_spec __initdata cpu_specs[] = { .icache_bsize = 128, .dcache_bsize = 128, .oprofile_type = PPC_OPROFILE_POWER4, - .oprofile_cpu_type = "ppc64/ibm-compat-v1", + .oprofile_cpu_type = 0, .cpu_setup = __setup_cpu_power8, .cpu_restore = __restore_cpu_power8, .platform = "power8", @@ -506,7 +506,7 @@ static struct cpu_spec __initdata cpu_specs[] = { .dcache_bsize = 128, .num_pmcs = 6, .pmc_type = PPC_PMC_IBM, - .oprofile_cpu_type = "ppc64/power8", + .oprofile_cpu_type = 0, .oprofile_type = PPC_OPROFILE_POWER4, .cpu_setup = __setup_cpu_power8, .cpu_restore = __restore_cpu_power8, -- cgit v1.2.3 From a515348fc69fd1d9e8ebd34a16f1026d7fe32048 Mon Sep 17 00:00:00 2001 From: Michael Neuling Date: Wed, 29 May 2013 19:34:27 +0000 Subject: powerpc/pseries: Kill all prefetch streams on context switch On context switch, we should have no prefetch streams leak from one userspace process to another. This frees up prefetch resources for the next process. Based on patch from Milton Miller. Signed-off-by: Michael Neuling Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/ppc_asm.h | 11 +++++++++++ arch/powerpc/kernel/entry_64.S | 7 +++++++ 2 files changed, 18 insertions(+) diff --git a/arch/powerpc/include/asm/ppc_asm.h b/arch/powerpc/include/asm/ppc_asm.h index cea8496091ff..2f1b6c5f8174 100644 --- a/arch/powerpc/include/asm/ppc_asm.h +++ b/arch/powerpc/include/asm/ppc_asm.h @@ -523,6 +523,17 @@ END_FTR_SECTION_NESTED(CPU_FTR_HAS_PPR,CPU_FTR_HAS_PPR,946) #define PPC440EP_ERR42 #endif +/* The following stops all load and store data streams associated with stream + * ID (ie. streams created explicitly). The embedded and server mnemonics for + * dcbt are different so we use machine "power4" here explicitly. + */ +#define DCBT_STOP_ALL_STREAM_IDS(scratch) \ +.machine push ; \ +.machine "power4" ; \ + lis scratch,0x60000000@h; \ + dcbt r0,scratch,0b01010; \ +.machine pop + /* * toreal/fromreal/tophys/tovirt macros. 32-bit BookE makes them * keep the address intact to be compatible with code shared with diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S index 0e9095e47b5b..246b11c4fe7e 100644 --- a/arch/powerpc/kernel/entry_64.S +++ b/arch/powerpc/kernel/entry_64.S @@ -501,6 +501,13 @@ BEGIN_FTR_SECTION ldarx r6,0,r1 END_FTR_SECTION_IFSET(CPU_FTR_STCX_CHECKS_ADDRESS) +#ifdef CONFIG_PPC_BOOK3S +/* Cancel all explict user streams as they will have no use after context + * switch and will stop the HW from creating streams itself + */ + DCBT_STOP_ALL_STREAM_IDS(r6) +#endif + addi r6,r4,-THREAD /* Convert THREAD to 'current' */ std r6,PACACURRENT(r13) /* Set new 'current' */ -- cgit v1.2.3 From 280a5ba22ca35575721d42e536176a3561f4ec43 Mon Sep 17 00:00:00 2001 From: Michael Neuling Date: Wed, 29 May 2013 19:34:29 +0000 Subject: powerpc/pseries: Improve stream generation comments in copypage/user No code changes, just documenting what's happening a little better. Signed-off-by: Michael Neuling Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/lib/copypage_power7.S | 19 +++++++++++-------- arch/powerpc/lib/copyuser_power7.S | 12 +++++++----- 2 files changed, 18 insertions(+), 13 deletions(-) diff --git a/arch/powerpc/lib/copypage_power7.S b/arch/powerpc/lib/copypage_power7.S index 0ef75bf0695c..395c594722a2 100644 --- a/arch/powerpc/lib/copypage_power7.S +++ b/arch/powerpc/lib/copypage_power7.S @@ -28,13 +28,14 @@ _GLOBAL(copypage_power7) * aligned we don't need to clear the bottom 7 bits of either * address. */ - ori r9,r3,1 /* stream=1 */ + ori r9,r3,1 /* stream=1 => to */ #ifdef CONFIG_PPC_64K_PAGES - lis r7,0x0E01 /* depth=7, units=512 */ + lis r7,0x0E01 /* depth=7 + * units/cachelines=512 */ #else lis r7,0x0E00 /* depth=7 */ - ori r7,r7,0x1000 /* units=32 */ + ori r7,r7,0x1000 /* units/cachelines=32 */ #endif ori r10,r7,1 /* stream=1 */ @@ -43,12 +44,14 @@ _GLOBAL(copypage_power7) .machine push .machine "power4" - dcbt r0,r4,0b01000 - dcbt r0,r7,0b01010 - dcbtst r0,r9,0b01000 - dcbtst r0,r10,0b01010 + /* setup read stream 0 */ + dcbt r0,r4,0b01000 /* addr from */ + dcbt r0,r7,0b01010 /* length and depth from */ + /* setup write stream 1 */ + dcbtst r0,r9,0b01000 /* addr to */ + dcbtst r0,r10,0b01010 /* length and depth to */ eieio - dcbt r0,r8,0b01010 /* GO */ + dcbt r0,r8,0b01010 /* all streams GO */ .machine pop #ifdef CONFIG_ALTIVEC diff --git a/arch/powerpc/lib/copyuser_power7.S b/arch/powerpc/lib/copyuser_power7.S index 0d24ff15f5f6..d1f11795a7ad 100644 --- a/arch/powerpc/lib/copyuser_power7.S +++ b/arch/powerpc/lib/copyuser_power7.S @@ -318,12 +318,14 @@ err1; stb r0,0(r3) .machine push .machine "power4" - dcbt r0,r6,0b01000 - dcbt r0,r7,0b01010 - dcbtst r0,r9,0b01000 - dcbtst r0,r10,0b01010 + /* setup read stream 0 */ + dcbt r0,r6,0b01000 /* addr from */ + dcbt r0,r7,0b01010 /* length and depth from */ + /* setup write stream 1 */ + dcbtst r0,r9,0b01000 /* addr to */ + dcbtst r0,r10,0b01010 /* length and depth to */ eieio - dcbt r0,r8,0b01010 /* GO */ + dcbt r0,r8,0b01010 /* all streams GO */ .machine pop beq cr1,.Lunwind_stack_nonvmx_copy -- cgit v1.2.3 From 0608d692463598c1d6e826d9dd7283381b4f246c Mon Sep 17 00:00:00 2001 From: "Aneesh Kumar K.V" Date: Fri, 31 May 2013 01:03:24 +0000 Subject: powerpc/mm: Always invalidate tlb on hpte invalidate and update If a hash bucket gets full, we "evict" a more/less random entry from it. When we do that we don't invalidate the TLB (hpte_remove) because we assume the old translation is still technically "valid". This implies that when we are invalidating or updating pte, even if HPTE entry is not valid we should do a tlb invalidate. This was a regression introduced by b1022fbd293564de91596b8775340cf41ad5214c Signed-off-by: Aneesh Kumar K.V Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/mm/hash_native_64.c | 30 ++++++++++++++++++++++-------- 1 file changed, 22 insertions(+), 8 deletions(-) diff --git a/arch/powerpc/mm/hash_native_64.c b/arch/powerpc/mm/hash_native_64.c index 6a2aead5b0e5..4c122c3f1623 100644 --- a/arch/powerpc/mm/hash_native_64.c +++ b/arch/powerpc/mm/hash_native_64.c @@ -336,11 +336,18 @@ static long native_hpte_updatepp(unsigned long slot, unsigned long newpp, hpte_v = hptep->v; actual_psize = hpte_actual_psize(hptep, psize); + /* + * We need to invalidate the TLB always because hpte_remove doesn't do + * a tlb invalidate. If a hash bucket gets full, we "evict" a more/less + * random entry from it. When we do that we don't invalidate the TLB + * (hpte_remove) because we assume the old translation is still + * technically "valid". + */ if (actual_psize < 0) { - native_unlock_hpte(hptep); - return -1; + actual_psize = psize; + ret = -1; + goto err_out; } - /* Even if we miss, we need to invalidate the TLB */ if (!HPTE_V_COMPARE(hpte_v, want_v)) { DBG_LOW(" -> miss\n"); ret = -1; @@ -350,6 +357,7 @@ static long native_hpte_updatepp(unsigned long slot, unsigned long newpp, hptep->r = (hptep->r & ~(HPTE_R_PP | HPTE_R_N)) | (newpp & (HPTE_R_PP | HPTE_R_N | HPTE_R_C)); } +err_out: native_unlock_hpte(hptep); /* Ensure it is out of the tlb too. */ @@ -409,7 +417,7 @@ static void native_hpte_updateboltedpp(unsigned long newpp, unsigned long ea, hptep = htab_address + slot; actual_psize = hpte_actual_psize(hptep, psize); if (actual_psize < 0) - return; + actual_psize = psize; /* Update the HPTE */ hptep->r = (hptep->r & ~(HPTE_R_PP | HPTE_R_N)) | @@ -437,21 +445,27 @@ static void native_hpte_invalidate(unsigned long slot, unsigned long vpn, hpte_v = hptep->v; actual_psize = hpte_actual_psize(hptep, psize); + /* + * We need to invalidate the TLB always because hpte_remove doesn't do + * a tlb invalidate. If a hash bucket gets full, we "evict" a more/less + * random entry from it. When we do that we don't invalidate the TLB + * (hpte_remove) because we assume the old translation is still + * technically "valid". + */ if (actual_psize < 0) { + actual_psize = psize; native_unlock_hpte(hptep); - local_irq_restore(flags); - return; + goto err_out; } - /* Even if we miss, we need to invalidate the TLB */ if (!HPTE_V_COMPARE(hpte_v, want_v)) native_unlock_hpte(hptep); else /* Invalidate the hpte. NOTE: this also unlocks it */ hptep->v = 0; +err_out: /* Invalidate the TLB */ tlbie(vpn, psize, actual_psize, ssize, local); - local_irq_restore(flags); } -- cgit v1.2.3 From f7b3367774f92a688d39ed767f0ae9b93af7873a Mon Sep 17 00:00:00 2001 From: Priyanka Jain Date: Fri, 31 May 2013 01:20:02 +0000 Subject: powerpc/32bit:Store temporary result in r0 instead of r8 Commit a9c4e541ea9b22944da356f2a9258b4eddcc953b "powerpc/kprobe: Complete kprobe and migrate exception frame" introduced a regression: While returning from exception handling in case of PREEMPT enabled, _TIF_NEED_RESCHED bit is checked in TI_FLAGS (thread_info flag) of current task. Only if this bit is set, it should continue with the process of calling preempt_schedule_irq() to schedule highest priority task if available. Current code assumes that r8 contains TI_FLAGS and check this for _TIF_NEED_RESCHED, but as r8 is modified in the code which executes before this check, r8 no longer contains the expected TI_FLAGS information. As a result check for comparison with _TIF_NEED_RESCHED was failing even if NEED_RESCHED bit is set in the current thread_info flag. Due to this, preempt_schedule_irq() and in turn scheduler was not getting called even if highest priority task is ready for execution. So, store temporary results in r0 instead of r8 to prevent r8 from getting modified as subsequent code is dependent on its value. Signed-off-by: Priyanka Jain CC: [v3.7+] Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/entry_32.S | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/powerpc/kernel/entry_32.S b/arch/powerpc/kernel/entry_32.S index d22e73e4618b..22b45a4955cd 100644 --- a/arch/powerpc/kernel/entry_32.S +++ b/arch/powerpc/kernel/entry_32.S @@ -849,7 +849,7 @@ resume_kernel: /* check current_thread_info, _TIF_EMULATE_STACK_STORE */ CURRENT_THREAD_INFO(r9, r1) lwz r8,TI_FLAGS(r9) - andis. r8,r8,_TIF_EMULATE_STACK_STORE@h + andis. r0,r8,_TIF_EMULATE_STACK_STORE@h beq+ 1f addi r8,r1,INT_FRAME_SIZE /* Get the kprobed function entry */ -- cgit v1.2.3 From 8e44ddc3f34d22c55f2977ac8b160609935d37ca Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Thu, 23 May 2013 15:42:21 +0000 Subject: powerpc/kvm/book3s: Add support for H_IPOLL and H_XIRR_X in XICS emulation This adds the remaining two hypercalls defined by PAPR for manipulating the XICS interrupt controller, H_IPOLL and H_XIRR_X. H_IPOLL returns information about the priority and pending interrupts for a virtual cpu, without changing any state. H_XIRR_X is like H_XIRR in that it reads and acknowledges the highest-priority pending interrupt, but it also returns the timestamp (timebase register value) from when the interrupt was first received by the hypervisor. Currently we just return the current time, since we don't do any software queueing of virtual interrupts inside the XICS emulation code. These hcalls are not currently used by Linux guests, but may be in future. Signed-off-by: Paul Mackerras Acked-by: Scott Wood Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/hvcall.h | 1 + arch/powerpc/kvm/book3s_hv.c | 2 ++ arch/powerpc/kvm/book3s_pr_papr.c | 2 ++ arch/powerpc/kvm/book3s_xics.c | 29 +++++++++++++++++++++++++++++ 4 files changed, 34 insertions(+) diff --git a/arch/powerpc/include/asm/hvcall.h b/arch/powerpc/include/asm/hvcall.h index cf4df8e2139a..0c7f2bfcf134 100644 --- a/arch/powerpc/include/asm/hvcall.h +++ b/arch/powerpc/include/asm/hvcall.h @@ -264,6 +264,7 @@ #define H_GET_MPP 0x2D4 #define H_HOME_NODE_ASSOCIATIVITY 0x2EC #define H_BEST_ENERGY 0x2F4 +#define H_XIRR_X 0x2FC #define H_RANDOM 0x300 #define H_COP 0x304 #define H_GET_MPP_X 0x314 diff --git a/arch/powerpc/kvm/book3s_hv.c b/arch/powerpc/kvm/book3s_hv.c index 9de24f8e03c7..550f5928b394 100644 --- a/arch/powerpc/kvm/book3s_hv.c +++ b/arch/powerpc/kvm/book3s_hv.c @@ -562,6 +562,8 @@ int kvmppc_pseries_do_hcall(struct kvm_vcpu *vcpu) case H_CPPR: case H_EOI: case H_IPI: + case H_IPOLL: + case H_XIRR_X: if (kvmppc_xics_enabled(vcpu)) { ret = kvmppc_xics_hcall(vcpu, req); break; diff --git a/arch/powerpc/kvm/book3s_pr_papr.c b/arch/powerpc/kvm/book3s_pr_papr.c index b24309c6c2d5..da0e0bc268bd 100644 --- a/arch/powerpc/kvm/book3s_pr_papr.c +++ b/arch/powerpc/kvm/book3s_pr_papr.c @@ -257,6 +257,8 @@ int kvmppc_h_pr(struct kvm_vcpu *vcpu, unsigned long cmd) case H_CPPR: case H_EOI: case H_IPI: + case H_IPOLL: + case H_XIRR_X: if (kvmppc_xics_enabled(vcpu)) return kvmppc_h_pr_xics_hcall(vcpu, cmd); break; diff --git a/arch/powerpc/kvm/book3s_xics.c b/arch/powerpc/kvm/book3s_xics.c index f7a103756618..94c1dd46b83d 100644 --- a/arch/powerpc/kvm/book3s_xics.c +++ b/arch/powerpc/kvm/book3s_xics.c @@ -650,6 +650,23 @@ static noinline int kvmppc_h_ipi(struct kvm_vcpu *vcpu, unsigned long server, return H_SUCCESS; } +static int kvmppc_h_ipoll(struct kvm_vcpu *vcpu, unsigned long server) +{ + union kvmppc_icp_state state; + struct kvmppc_icp *icp; + + icp = vcpu->arch.icp; + if (icp->server_num != server) { + icp = kvmppc_xics_find_server(vcpu->kvm, server); + if (!icp) + return H_PARAMETER; + } + state = ACCESS_ONCE(icp->state); + kvmppc_set_gpr(vcpu, 4, ((u32)state.cppr << 24) | state.xisr); + kvmppc_set_gpr(vcpu, 5, state.mfrr); + return H_SUCCESS; +} + static noinline void kvmppc_h_cppr(struct kvm_vcpu *vcpu, unsigned long cppr) { union kvmppc_icp_state old_state, new_state; @@ -787,6 +804,18 @@ int kvmppc_xics_hcall(struct kvm_vcpu *vcpu, u32 req) if (!xics || !vcpu->arch.icp) return H_HARDWARE; + /* These requests don't have real-mode implementations at present */ + switch (req) { + case H_XIRR_X: + res = kvmppc_h_xirr(vcpu); + kvmppc_set_gpr(vcpu, 4, res); + kvmppc_set_gpr(vcpu, 5, get_tb()); + return rc; + case H_IPOLL: + rc = kvmppc_h_ipoll(vcpu, kvmppc_get_gpr(vcpu, 4)); + return rc; + } + /* Check for real mode returning too hard */ if (xics->real_mode) return kvmppc_xics_rm_complete(vcpu, req); -- cgit v1.2.3 From f274ef8747d3be649bba8708696fb31cb00fa75a Mon Sep 17 00:00:00 2001 From: "Srivatsa S. Bhat" Date: Tue, 21 May 2013 09:32:48 +0000 Subject: powerpc/pseries: Always enable CONFIG_HOTPLUG_CPU on PSERIES SMP MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Adam Lackorzynski reported the following build failure on !CONFIG_HOTPLUG_CPU configuration: CC arch/powerpc/kernel/rtas.o arch/powerpc/kernel/rtas.c: In function ‘rtas_cpu_state_change_mask’: arch/powerpc/kernel/rtas.c:843:4: error: implicit declaration of function ‘cpu_down’ [-Werror=implicit-function-declaration] cc1: all warnings being treated as errors make[1]: *** [arch/powerpc/kernel/rtas.o] Error 1 make: *** [arch/powerpc/kernel] Error 2 The build fails because cpu_down() is defined only under CONFIG_HOTPLUG_CPU. Looking further, the mobility code in pseries is one of the call-sites which uses rtas_ibm_suspend_me(), which in turn calls rtas_cpu_state_change_mask(). And the mobility code is unconditionally compiled-in (it does not fall under any Kconfig option). And commit 120496ac (powerpc: Bring all threads online prior to migration/hibernation) which introduced this build regression is critical for the proper functioning of the migration code. So it appears that the only solution to this problem is to enable CONFIG_HOTPLUG_CPU if SMP is enabled on PPC_PSERIES platforms. So make that change in the Kconfig. Reported-by: Adam Lackorzynski Cc: stable@vger.kernel.org Signed-off-by: Srivatsa S. Bhat Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/platforms/pseries/Kconfig | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/powerpc/platforms/pseries/Kconfig b/arch/powerpc/platforms/pseries/Kconfig index 023b288f895b..4459eff7a75a 100644 --- a/arch/powerpc/platforms/pseries/Kconfig +++ b/arch/powerpc/platforms/pseries/Kconfig @@ -19,6 +19,8 @@ config PPC_PSERIES select ZLIB_DEFLATE select PPC_DOORBELL select HAVE_CONTEXT_TRACKING + select HOTPLUG if SMP + select HOTPLUG_CPU if SMP default y config PPC_SPLPAR -- cgit v1.2.3 From 279838960484fa22d903086eea743a6b6700647d Mon Sep 17 00:00:00 2001 From: Kevin Hao Date: Thu, 16 May 2013 20:58:41 +0000 Subject: powerpc/pci: Remove the stale comments of pci_process_bridge_OF_ranges These comments already don't apply to the current code. So just remove them. Signed-off-by: Kevin Hao Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/pci-common.c | 9 --------- 1 file changed, 9 deletions(-) diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c index e9acf50dd5b2..8acd7c970830 100644 --- a/arch/powerpc/kernel/pci-common.c +++ b/arch/powerpc/kernel/pci-common.c @@ -657,15 +657,6 @@ void pci_resource_to_user(const struct pci_dev *dev, int bar, * ranges. However, some machines (thanks Apple !) tend to split their * space into lots of small contiguous ranges. So we have to coalesce. * - * - We can only cope with all memory ranges having the same offset - * between CPU addresses and PCI addresses. Unfortunately, some bridges - * are setup for a large 1:1 mapping along with a small "window" which - * maps PCI address 0 to some arbitrary high address of the CPU space in - * order to give access to the ISA memory hole. - * The way out of here that I've chosen for now is to always set the - * offset based on the first resource found, then override it if we - * have a different offset and the previous was set by an ISA hole. - * * - Some busses have IO space not starting at 0, which causes trouble with * the way we do our IO resource renumbering. The code somewhat deals with * it for 64 bits but I would expect problems on 32 bits. -- cgit v1.2.3 From 858957ab1e3a7ee29ed40309bdf0f1b7bcf5bf30 Mon Sep 17 00:00:00 2001 From: Kevin Hao Date: Thu, 16 May 2013 20:58:42 +0000 Subject: powerpc/pci: Remove the unused variables in pci_process_bridge_OF_ranges The codes which ever used these two variables have gone. Throw away them too. Signed-off-by: Kevin Hao Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/pci-common.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c index 8acd7c970830..7f2273cc3c7d 100644 --- a/arch/powerpc/kernel/pci-common.c +++ b/arch/powerpc/kernel/pci-common.c @@ -671,10 +671,9 @@ void pci_process_bridge_OF_ranges(struct pci_controller *hose, int rlen; int pna = of_n_addr_cells(dev); int np = pna + 5; - int memno = 0, isa_hole = -1; + int memno = 0; u32 pci_space; unsigned long long pci_addr, cpu_addr, pci_next, cpu_next, size; - unsigned long long isa_mb = 0; struct resource *res; printk(KERN_INFO "PCI host bridge %s %s ranges:\n", @@ -768,8 +767,6 @@ void pci_process_bridge_OF_ranges(struct pci_controller *hose, } /* Handles ISA memory hole space here */ if (pci_addr == 0) { - isa_mb = cpu_addr; - isa_hole = memno; if (primary || isa_mem_base == 0) isa_mem_base = cpu_addr; hose->isa_mem_phys = cpu_addr; -- cgit v1.2.3 From cbda6aa10bd2d97e38f4d26a03a0b2183ad580ba Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Wed, 15 May 2013 20:19:30 +0000 Subject: powerpc/perf: Revert to original NO_SIPR logic This is a revert and then some of commit 860aad7 "Add regs_no_sipr()". This workaround was only needed on early chip versions. As before NO_SIPR becomes a static flag of the PMU struct. Signed-off-by: Michael Ellerman Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/perf/core-book3s.c | 30 ++++++------------------------ 1 file changed, 6 insertions(+), 24 deletions(-) diff --git a/arch/powerpc/perf/core-book3s.c b/arch/powerpc/perf/core-book3s.c index 426180b84978..b2f873bc891b 100644 --- a/arch/powerpc/perf/core-book3s.c +++ b/arch/powerpc/perf/core-book3s.c @@ -110,7 +110,7 @@ static inline void power_pmu_bhrb_read(struct cpu_hw_events *cpuhw) {} static bool regs_use_siar(struct pt_regs *regs) { - return !!(regs->result & 1); + return !!regs->result; } /* @@ -181,11 +181,6 @@ static bool regs_sipr(struct pt_regs *regs) return !!(regs->dsisr & sipr); } -static bool regs_no_sipr(struct pt_regs *regs) -{ - return !!(regs->result & 2); -} - static inline u32 perf_flags_from_msr(struct pt_regs *regs) { if (regs->msr & MSR_PR) @@ -208,7 +203,7 @@ static inline u32 perf_get_misc_flags(struct pt_regs *regs) * SIAR which should give slightly more reliable * results */ - if (regs_no_sipr(regs)) { + if (ppmu->flags & PPMU_NO_SIPR) { unsigned long siar = mfspr(SPRN_SIAR); if (siar >= PAGE_OFFSET) return PERF_RECORD_MISC_KERNEL; @@ -239,22 +234,9 @@ static inline void perf_read_regs(struct pt_regs *regs) int use_siar; regs->dsisr = mmcra; - regs->result = 0; - - if (ppmu->flags & PPMU_NO_SIPR) - regs->result |= 2; - - /* - * On power8 if we're in random sampling mode, the SIER is updated. - * If we're in continuous sampling mode, we don't have SIPR. - */ - if (ppmu->flags & PPMU_HAS_SIER) { - if (marked) - regs->dar = mfspr(SPRN_SIER); - else - regs->result |= 2; - } + if (ppmu->flags & PPMU_HAS_SIER) + regs->dar = mfspr(SPRN_SIER); /* * If this isn't a PMU exception (eg a software event) the SIAR is @@ -279,12 +261,12 @@ static inline void perf_read_regs(struct pt_regs *regs) use_siar = 1; else if ((ppmu->flags & PPMU_NO_CONT_SAMPLING)) use_siar = 0; - else if (!regs_no_sipr(regs) && regs_sipr(regs)) + else if (!(ppmu->flags & PPMU_NO_SIPR) && regs_sipr(regs)) use_siar = 0; else use_siar = 1; - regs->result |= use_siar; + regs->result = use_siar; } /* -- cgit v1.2.3 From 58a032c3b106adcd2b83b7e631de3b79f238cdd2 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Wed, 15 May 2013 20:19:31 +0000 Subject: powerpc/perf: Add missing SIER support Commit 8f61aa3 "Add support for SIER" missed updates to siar_valid() and perf_get_data_addr(). In both cases we need to check the SIER instead of mmcra. Signed-off-by: Michael Ellerman Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/perf/core-book3s.c | 37 +++++++++++++++++++++++++------------ 1 file changed, 25 insertions(+), 12 deletions(-) diff --git a/arch/powerpc/perf/core-book3s.c b/arch/powerpc/perf/core-book3s.c index b2f873bc891b..845c867444e6 100644 --- a/arch/powerpc/perf/core-book3s.c +++ b/arch/powerpc/perf/core-book3s.c @@ -136,22 +136,30 @@ static inline unsigned long perf_ip_adjust(struct pt_regs *regs) * If we're not doing instruction sampling, give them the SDAR * (sampled data address). If we are doing instruction sampling, then * only give them the SDAR if it corresponds to the instruction - * pointed to by SIAR; this is indicated by the [POWER6_]MMCRA_SDSYNC or - * the [POWER7P_]MMCRA_SDAR_VALID bit in MMCRA. + * pointed to by SIAR; this is indicated by the [POWER6_]MMCRA_SDSYNC, the + * [POWER7P_]MMCRA_SDAR_VALID bit in MMCRA, or the SDAR_VALID bit in SIER. */ static inline void perf_get_data_addr(struct pt_regs *regs, u64 *addrp) { unsigned long mmcra = regs->dsisr; - unsigned long sdsync; + bool sdar_valid; - if (ppmu->flags & PPMU_SIAR_VALID) - sdsync = POWER7P_MMCRA_SDAR_VALID; - else if (ppmu->flags & PPMU_ALT_SIPR) - sdsync = POWER6_MMCRA_SDSYNC; - else - sdsync = MMCRA_SDSYNC; + if (ppmu->flags & PPMU_HAS_SIER) + sdar_valid = regs->dar & SIER_SDAR_VALID; + else { + unsigned long sdsync; + + if (ppmu->flags & PPMU_SIAR_VALID) + sdsync = POWER7P_MMCRA_SDAR_VALID; + else if (ppmu->flags & PPMU_ALT_SIPR) + sdsync = POWER6_MMCRA_SDSYNC; + else + sdsync = MMCRA_SDSYNC; - if (!(mmcra & MMCRA_SAMPLE_ENABLE) || (mmcra & sdsync)) + sdar_valid = mmcra & sdsync; + } + + if (!(mmcra & MMCRA_SAMPLE_ENABLE) || sdar_valid) *addrp = mfspr(SPRN_SDAR); } @@ -290,8 +298,13 @@ static inline int siar_valid(struct pt_regs *regs) unsigned long mmcra = regs->dsisr; int marked = mmcra & MMCRA_SAMPLE_ENABLE; - if ((ppmu->flags & PPMU_SIAR_VALID) && marked) - return mmcra & POWER7P_MMCRA_SIAR_VALID; + if (marked) { + if (ppmu->flags & PPMU_HAS_SIER) + return regs->dar & SIER_SIAR_VALID; + + if (ppmu->flags & PPMU_SIAR_VALID) + return mmcra & POWER7P_MMCRA_SIAR_VALID; + } return 1; } -- cgit v1.2.3 From fda3f402f446e82204266f4a3bf26912f2d55e75 Mon Sep 17 00:00:00 2001 From: Nicolas Dichtel Date: Fri, 31 May 2013 05:37:57 +0000 Subject: snmp6: remove IPSTATS_MIB_CSUMERRORS This stat is not relevant in IPv6, there is no checksum in IPv6 header. Just leave a comment to explain the hole. Signed-off-by: Nicolas Dichtel Acked-by: Eric Dumazet Signed-off-by: David S. Miller --- net/ipv6/proc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/ipv6/proc.c b/net/ipv6/proc.c index f3c1ff4357ff..51c3285b5d9b 100644 --- a/net/ipv6/proc.c +++ b/net/ipv6/proc.c @@ -90,7 +90,7 @@ static const struct snmp_mib snmp6_ipstats_list[] = { SNMP_MIB_ITEM("Ip6OutMcastOctets", IPSTATS_MIB_OUTMCASTOCTETS), SNMP_MIB_ITEM("Ip6InBcastOctets", IPSTATS_MIB_INBCASTOCTETS), SNMP_MIB_ITEM("Ip6OutBcastOctets", IPSTATS_MIB_OUTBCASTOCTETS), - SNMP_MIB_ITEM("InCsumErrors", IPSTATS_MIB_CSUMERRORS), + /* IPSTATS_MIB_CSUMERRORS is not relevant in IPv6 (no checksum) */ SNMP_MIB_SENTINEL }; -- cgit v1.2.3 From badec11b645e21acbc2411d7759e3efa559af443 Mon Sep 17 00:00:00 2001 From: Will Schmidt Date: Mon, 20 May 2013 05:04:18 +0000 Subject: powerpc/cputable: Fix typo on P7+ cputable entry Fix a typo in setting COMMON_USER2_POWER7 bits to .cpu_user_features2 cpu specs table. Signed-off-by: Will Schmidt Acked-by: Michael Neuling Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/cputable.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c index b8808bcb9e4e..1f0937d7d4b5 100644 --- a/arch/powerpc/kernel/cputable.c +++ b/arch/powerpc/kernel/cputable.c @@ -482,7 +482,7 @@ static struct cpu_spec __initdata cpu_specs[] = { .cpu_name = "POWER7+ (raw)", .cpu_features = CPU_FTRS_POWER7, .cpu_user_features = COMMON_USER_POWER7, - .cpu_user_features = COMMON_USER2_POWER7, + .cpu_user_features2 = COMMON_USER2_POWER7, .mmu_features = MMU_FTRS_POWER7, .icache_bsize = 128, .dcache_bsize = 128, -- cgit v1.2.3 From 9747ba6636be8a7e8ba83a1fb231d061ca318e4f Mon Sep 17 00:00:00 2001 From: Jay Vosburgh Date: Fri, 31 May 2013 11:57:26 +0000 Subject: net/core: __hw_addr_create_ex does not initialize sync_cnt The sync_cnt field is not being initialized, which can result in arbitrary values in the field. Fixed by initializing it to zero. Signed-off-by: Jay Vosburgh Reviewed-by: Vlad Yasevich Tested-by: Shawn Bohrer Signed-off-by: David S. Miller --- net/core/dev_addr_lists.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/core/dev_addr_lists.c b/net/core/dev_addr_lists.c index c013f38482a1..1f919d979db3 100644 --- a/net/core/dev_addr_lists.c +++ b/net/core/dev_addr_lists.c @@ -39,6 +39,7 @@ static int __hw_addr_create_ex(struct netdev_hw_addr_list *list, ha->refcount = 1; ha->global_use = global; ha->synced = sync; + ha->sync_cnt = 0; list_add_tail_rcu(&ha->list, &list->list); list->count++; -- cgit v1.2.3 From 60ba834c2fb65f2fafee47e03c258fac579d0591 Mon Sep 17 00:00:00 2001 From: Jay Vosburgh Date: Fri, 31 May 2013 11:57:27 +0000 Subject: net/core: __hw_addr_unsync_one "from" address not marked synced When an address is added to a subordinate interface (the "to" list), the address entry in the "from" list is not marked "synced" as the entry added to the "to" list is. When performing the unsync operation (e.g., dev_mc_unsync), __hw_addr_unsync_one calls __hw_addr_del_entry with the "synced" parameter set to true for the case when the address reference is being released from the "from" list. This causes a test inside to fail, with the result being that the reference count on the "from" address is not properly decremeted and the address on the "from" list will never be freed. Correct this by having __hw_addr_unsync_one call the __hw_addr_del_entry function with the "sync" flag set to false for the "remove from the from list" case. Signed-off-by: Jay Vosburgh Reviewed-by: Vlad Yasevich Tested-by: Shawn Bohrer Signed-off-by: David S. Miller --- net/core/dev_addr_lists.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/net/core/dev_addr_lists.c b/net/core/dev_addr_lists.c index 1f919d979db3..c858e81e6423 100644 --- a/net/core/dev_addr_lists.c +++ b/net/core/dev_addr_lists.c @@ -160,7 +160,8 @@ static void __hw_addr_unsync_one(struct netdev_hw_addr_list *to_list, if (err) return; ha->sync_cnt--; - __hw_addr_del_entry(from_list, ha, false, true); + /* address on from list is not marked synced */ + __hw_addr_del_entry(from_list, ha, false, false); } static int __hw_addr_sync_multiple(struct netdev_hw_addr_list *to_list, -- cgit v1.2.3 From 29ca2f8fcc721517b83d0a560c47cee2dde827a6 Mon Sep 17 00:00:00 2001 From: Jay Vosburgh Date: Fri, 31 May 2013 11:57:28 +0000 Subject: net/core: __hw_addr_sync_one / _multiple broken Currently, __hw_addr_sync_one is called in a loop by __hw_addr_sync_multiple to sync each of a "from" device's hw addresses to a "to" device. __hw_addr_sync_one calls __hw_addr_add_ex to attempt to add each address. __hw_addr_add_ex is called with global=false, and sync=true. __hw_addr_add_ex checks to see if the new address matches an address already on the list. If so, it tests global and sync. In this case, sync=true, and it then checks if the address is already synced, and if so, returns 0. This 0 return causes __hw_addr_sync_one to increment the sync_cnt and refcount for the "from" list's address entry, even though the address is already synced and has a reference and sync_cnt. This will cause the sync_cnt and refcount to increment without bound every time an addresses is added to the "from" device and synced to the "to" device. The fix here has two parts: First, when __hw_addr_add_ex finds the address already exists and is synced, return -EEXIST instead of 0. Second, __hw_addr_sync_one checks the error return for -EEXIST, and if so, it (a) does not add a refcount/sync_cnt, and (b) returns 0 itself so that __hw_addr_sync_multiple will not return an error. Signed-off-by: Jay Vosburgh Reviewed-by: Vlad Yasevich Tested-by: Shawn Bohrer Signed-off-by: David S. Miller --- net/core/dev_addr_lists.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) diff --git a/net/core/dev_addr_lists.c b/net/core/dev_addr_lists.c index c858e81e6423..8e2c2ef8053d 100644 --- a/net/core/dev_addr_lists.c +++ b/net/core/dev_addr_lists.c @@ -67,7 +67,7 @@ static int __hw_addr_add_ex(struct netdev_hw_addr_list *list, } if (sync) { if (ha->synced) - return 0; + return -EEXIST; else ha->synced = true; } @@ -140,10 +140,13 @@ static int __hw_addr_sync_one(struct netdev_hw_addr_list *to_list, err = __hw_addr_add_ex(to_list, ha->addr, addr_len, ha->type, false, true); - if (err) + if (err && err != -EEXIST) return err; - ha->sync_cnt++; - ha->refcount++; + + if (!err) { + ha->sync_cnt++; + ha->refcount++; + } return 0; } -- cgit v1.2.3 From b190a50875b95e58ebe2b00ed3bf7f1d44961471 Mon Sep 17 00:00:00 2001 From: Jay Vosburgh Date: Fri, 31 May 2013 11:57:29 +0000 Subject: net/core: dev_mc_sync_multiple calls wrong helper The dev_mc_sync_multiple function is currently calling __hw_addr_sync, and not __hw_addr_sync_multiple. This will result in addresses only being synced to the first device from the set. Corrected by calling the _multiple variant. Signed-off-by: Jay Vosburgh Reviewed-by: Vlad Yasevich Tested-by: Shawn Bohrer Signed-off-by: David S. Miller --- net/core/dev_addr_lists.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/core/dev_addr_lists.c b/net/core/dev_addr_lists.c index 8e2c2ef8053d..6cda4e2c2132 100644 --- a/net/core/dev_addr_lists.c +++ b/net/core/dev_addr_lists.c @@ -801,7 +801,7 @@ int dev_mc_sync_multiple(struct net_device *to, struct net_device *from) return -EINVAL; netif_addr_lock_nested(to); - err = __hw_addr_sync(&to->mc, &from->mc, to->addr_len); + err = __hw_addr_sync_multiple(&to->mc, &from->mc, to->addr_len); if (!err) __dev_set_rx_mode(to); netif_addr_unlock(to); -- cgit v1.2.3 From 1e2bd517c108816220f262d7954b697af03b5f9c Mon Sep 17 00:00:00 2001 From: Pravin B Shelar Date: Thu, 30 May 2013 06:45:27 +0000 Subject: udp6: Fix udp fragmentation for tunnel traffic. udp6 over GRE tunnel does not work after to GRE tso changes. GRE tso handler passes inner packet but keeps track of outer header start in SKB_GSO_CB(skb)->mac_offset. udp6 fragment need to take care of outer header, which start at the mac_offset, while adding fragment header. This bug is introduced by commit 68c3316311 (GRE: Add TCP segmentation offload for GRE). Reported-by: Dmitry Kravkov Signed-off-by: Pravin B Shelar Tested-by: Dmitry Kravkov Signed-off-by: David S. Miller --- include/linux/skbuff.h | 15 +++++++++++++++ net/ipv6/udp_offload.c | 20 ++++++++++++-------- 2 files changed, 27 insertions(+), 8 deletions(-) diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h index 2e0ced1af3b1..9c676eae3968 100644 --- a/include/linux/skbuff.h +++ b/include/linux/skbuff.h @@ -2852,6 +2852,21 @@ static inline int skb_tnl_header_len(const struct sk_buff *inner_skb) SKB_GSO_CB(inner_skb)->mac_offset; } +static inline int gso_pskb_expand_head(struct sk_buff *skb, int extra) +{ + int new_headroom, headroom; + int ret; + + headroom = skb_headroom(skb); + ret = pskb_expand_head(skb, extra, 0, GFP_ATOMIC); + if (ret) + return ret; + + new_headroom = skb_headroom(skb); + SKB_GSO_CB(skb)->mac_offset += (new_headroom - headroom); + return 0; +} + static inline bool skb_is_gso(const struct sk_buff *skb) { return skb_shinfo(skb)->gso_size; diff --git a/net/ipv6/udp_offload.c b/net/ipv6/udp_offload.c index 3bb3a891a424..d3cfaf9c7a08 100644 --- a/net/ipv6/udp_offload.c +++ b/net/ipv6/udp_offload.c @@ -46,11 +46,12 @@ static struct sk_buff *udp6_ufo_fragment(struct sk_buff *skb, unsigned int mss; unsigned int unfrag_ip6hlen, unfrag_len; struct frag_hdr *fptr; - u8 *mac_start, *prevhdr; + u8 *packet_start, *prevhdr; u8 nexthdr; u8 frag_hdr_sz = sizeof(struct frag_hdr); int offset; __wsum csum; + int tnl_hlen; mss = skb_shinfo(skb)->gso_size; if (unlikely(skb->len <= mss)) @@ -83,9 +84,11 @@ static struct sk_buff *udp6_ufo_fragment(struct sk_buff *skb, skb->ip_summed = CHECKSUM_NONE; /* Check if there is enough headroom to insert fragment header. */ - if ((skb_mac_header(skb) < skb->head + frag_hdr_sz) && - pskb_expand_head(skb, frag_hdr_sz, 0, GFP_ATOMIC)) - goto out; + tnl_hlen = skb_tnl_header_len(skb); + if (skb_headroom(skb) < (tnl_hlen + frag_hdr_sz)) { + if (gso_pskb_expand_head(skb, tnl_hlen + frag_hdr_sz)) + goto out; + } /* Find the unfragmentable header and shift it left by frag_hdr_sz * bytes to insert fragment header. @@ -93,11 +96,12 @@ static struct sk_buff *udp6_ufo_fragment(struct sk_buff *skb, unfrag_ip6hlen = ip6_find_1stfragopt(skb, &prevhdr); nexthdr = *prevhdr; *prevhdr = NEXTHDR_FRAGMENT; - unfrag_len = skb_network_header(skb) - skb_mac_header(skb) + - unfrag_ip6hlen; - mac_start = skb_mac_header(skb); - memmove(mac_start-frag_hdr_sz, mac_start, unfrag_len); + unfrag_len = (skb_network_header(skb) - skb_mac_header(skb)) + + unfrag_ip6hlen + tnl_hlen; + packet_start = (u8 *) skb->head + SKB_GSO_CB(skb)->mac_offset; + memmove(packet_start-frag_hdr_sz, packet_start, unfrag_len); + SKB_GSO_CB(skb)->mac_offset -= frag_hdr_sz; skb->mac_header -= frag_hdr_sz; skb->network_header -= frag_hdr_sz; -- cgit v1.2.3 From e4c1721642bbd42d8142f4811cde0588c28db51d Mon Sep 17 00:00:00 2001 From: Paul Moore Date: Wed, 29 May 2013 07:36:25 +0000 Subject: xfrm: force a garbage collection after deleting a policy In some cases after deleting a policy from the SPD the policy would remain in the dst/flow/route cache for an extended period of time which caused problems for SELinux as its dynamic network access controls key off of the number of XFRM policy and state entries. This patch corrects this problem by forcing a XFRM garbage collection whenever a policy is sucessfully removed. Reported-by: Ondrej Moris Signed-off-by: Paul Moore Signed-off-by: David S. Miller --- include/net/xfrm.h | 5 +++++ net/key/af_key.c | 4 ++++ net/xfrm/xfrm_policy.c | 3 ++- net/xfrm/xfrm_user.c | 2 ++ 4 files changed, 13 insertions(+), 1 deletion(-) diff --git a/include/net/xfrm.h b/include/net/xfrm.h index ae16531d0d35..94ce082b29dc 100644 --- a/include/net/xfrm.h +++ b/include/net/xfrm.h @@ -1160,6 +1160,8 @@ static inline void xfrm_sk_free_policy(struct sock *sk) } } +extern void xfrm_garbage_collect(struct net *net); + #else static inline void xfrm_sk_free_policy(struct sock *sk) {} @@ -1194,6 +1196,9 @@ static inline int xfrm6_policy_check_reverse(struct sock *sk, int dir, { return 1; } +static inline void xfrm_garbage_collect(struct net *net) +{ +} #endif static __inline__ diff --git a/net/key/af_key.c b/net/key/af_key.c index 5b1e5af25713..c5fbd7589681 100644 --- a/net/key/af_key.c +++ b/net/key/af_key.c @@ -2366,6 +2366,8 @@ static int pfkey_spddelete(struct sock *sk, struct sk_buff *skb, const struct sa out: xfrm_pol_put(xp); + if (err == 0) + xfrm_garbage_collect(net); return err; } @@ -2615,6 +2617,8 @@ static int pfkey_spdget(struct sock *sk, struct sk_buff *skb, const struct sadb_ out: xfrm_pol_put(xp); + if (delete && err == 0) + xfrm_garbage_collect(net); return err; } diff --git a/net/xfrm/xfrm_policy.c b/net/xfrm/xfrm_policy.c index 23cea0f74336..ea970b8002a2 100644 --- a/net/xfrm/xfrm_policy.c +++ b/net/xfrm/xfrm_policy.c @@ -2557,11 +2557,12 @@ static void __xfrm_garbage_collect(struct net *net) } } -static void xfrm_garbage_collect(struct net *net) +void xfrm_garbage_collect(struct net *net) { flow_cache_flush(); __xfrm_garbage_collect(net); } +EXPORT_SYMBOL(xfrm_garbage_collect); static void xfrm_garbage_collect_deferred(struct net *net) { diff --git a/net/xfrm/xfrm_user.c b/net/xfrm/xfrm_user.c index aa778748c565..3f565e495ac6 100644 --- a/net/xfrm/xfrm_user.c +++ b/net/xfrm/xfrm_user.c @@ -1681,6 +1681,8 @@ static int xfrm_get_policy(struct sk_buff *skb, struct nlmsghdr *nlh, out: xfrm_pol_put(xp); + if (delete && err == 0) + xfrm_garbage_collect(net); return err; } -- cgit v1.2.3 From e4e8536f65b51ce91c30588b0925872bdfc60d03 Mon Sep 17 00:00:00 2001 From: Paul Moore Date: Wed, 29 May 2013 07:36:32 +0000 Subject: selinux: fix the labeled xfrm/IPsec reference count handling The SELinux labeled IPsec code was improperly handling its reference counting, dropping a reference on a delete operation instead of on a free/release operation. Reported-by: Ondrej Moris Signed-off-by: Paul Moore Signed-off-by: David S. Miller --- security/selinux/xfrm.c | 34 ++++++++++++++-------------------- 1 file changed, 14 insertions(+), 20 deletions(-) diff --git a/security/selinux/xfrm.c b/security/selinux/xfrm.c index 8ab295154517..d03081886214 100644 --- a/security/selinux/xfrm.c +++ b/security/selinux/xfrm.c @@ -316,6 +316,7 @@ int selinux_xfrm_policy_clone(struct xfrm_sec_ctx *old_ctx, memcpy(new_ctx, old_ctx, sizeof(*new_ctx)); memcpy(new_ctx->ctx_str, old_ctx->ctx_str, new_ctx->ctx_len); + atomic_inc(&selinux_xfrm_refcount); *new_ctxp = new_ctx; } return 0; @@ -326,6 +327,7 @@ int selinux_xfrm_policy_clone(struct xfrm_sec_ctx *old_ctx, */ void selinux_xfrm_policy_free(struct xfrm_sec_ctx *ctx) { + atomic_dec(&selinux_xfrm_refcount); kfree(ctx); } @@ -335,17 +337,13 @@ void selinux_xfrm_policy_free(struct xfrm_sec_ctx *ctx) int selinux_xfrm_policy_delete(struct xfrm_sec_ctx *ctx) { const struct task_security_struct *tsec = current_security(); - int rc = 0; - if (ctx) { - rc = avc_has_perm(tsec->sid, ctx->ctx_sid, - SECCLASS_ASSOCIATION, - ASSOCIATION__SETCONTEXT, NULL); - if (rc == 0) - atomic_dec(&selinux_xfrm_refcount); - } + if (!ctx) + return 0; - return rc; + return avc_has_perm(tsec->sid, ctx->ctx_sid, + SECCLASS_ASSOCIATION, ASSOCIATION__SETCONTEXT, + NULL); } /* @@ -370,8 +368,8 @@ int selinux_xfrm_state_alloc(struct xfrm_state *x, struct xfrm_user_sec_ctx *uct */ void selinux_xfrm_state_free(struct xfrm_state *x) { - struct xfrm_sec_ctx *ctx = x->security; - kfree(ctx); + atomic_dec(&selinux_xfrm_refcount); + kfree(x->security); } /* @@ -381,17 +379,13 @@ int selinux_xfrm_state_delete(struct xfrm_state *x) { const struct task_security_struct *tsec = current_security(); struct xfrm_sec_ctx *ctx = x->security; - int rc = 0; - if (ctx) { - rc = avc_has_perm(tsec->sid, ctx->ctx_sid, - SECCLASS_ASSOCIATION, - ASSOCIATION__SETCONTEXT, NULL); - if (rc == 0) - atomic_dec(&selinux_xfrm_refcount); - } + if (!ctx) + return 0; - return rc; + return avc_has_perm(tsec->sid, ctx->ctx_sid, + SECCLASS_ASSOCIATION, ASSOCIATION__SETCONTEXT, + NULL); } /* -- cgit v1.2.3 From 6d7581e62f8be462440d7b22c6361f7c9fa4902b Mon Sep 17 00:00:00 2001 From: Jiri Pirko Date: Wed, 29 May 2013 05:02:56 +0000 Subject: list: introduce list_first_entry_or_null non-rcu variant of list_first_or_null_rcu Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller --- include/linux/list.h | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/include/linux/list.h b/include/linux/list.h index 6a1f8df9144b..b83e5657365a 100644 --- a/include/linux/list.h +++ b/include/linux/list.h @@ -361,6 +361,17 @@ static inline void list_splice_tail_init(struct list_head *list, #define list_first_entry(ptr, type, member) \ list_entry((ptr)->next, type, member) +/** + * list_first_entry_or_null - get the first element from a list + * @ptr: the list head to take the element from. + * @type: the type of the struct this is embedded in. + * @member: the name of the list_struct within the struct. + * + * Note that if the list is empty, it returns NULL. + */ +#define list_first_entry_or_null(ptr, type, member) \ + (!list_empty(ptr) ? list_first_entry(ptr, type, member) : NULL) + /** * list_for_each - iterate over a list * @pos: the &struct list_head to use as a loop cursor. -- cgit v1.2.3 From 3f3e7ce4ff87c8ea69acaa7700699fb26baa2914 Mon Sep 17 00:00:00 2001 From: Jiri Pirko Date: Wed, 29 May 2013 05:02:57 +0000 Subject: team: fix port list dump for big number of ports In case the port list dump does not fit into one skb currently the dump would start over again. Fix this by continue from the last dumped port. Introduced by commit d90f889e9c (team: handle sending port list in the same way option list is sent) Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller --- drivers/net/team/team.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/net/team/team.c b/drivers/net/team/team.c index 7c43261975bd..d016a76ad44b 100644 --- a/drivers/net/team/team.c +++ b/drivers/net/team/team.c @@ -2374,7 +2374,8 @@ static int team_nl_send_port_list_get(struct team *team, u32 portid, u32 seq, bool incomplete; int i; - port = list_first_entry(&team->port_list, struct team_port, list); + port = list_first_entry_or_null(&team->port_list, + struct team_port, list); start_again: err = __send_and_alloc_skb(&skb, team, portid, send_func); @@ -2402,8 +2403,8 @@ start_again: err = team_nl_fill_one_port_get(skb, one_port); if (err) goto errout; - } else { - list_for_each_entry(port, &team->port_list, list) { + } else if (port) { + list_for_each_entry_from(port, &team->port_list, list) { err = team_nl_fill_one_port_get(skb, port); if (err) { if (err == -EMSGSIZE) { -- cgit v1.2.3 From c802db1164f28e62c6a43132b8d290cb8113f2ac Mon Sep 17 00:00:00 2001 From: Haiyang Zhang Date: Tue, 28 May 2013 06:15:56 +0000 Subject: hyperv: Fix vlan_proto setting in netvsc_recv_callback() Since the recent addition of 8021AD, we need to set the new field vlan_proto in sk_buff. Otherwise, it will trigger BUG() call in vlan_proto_idx(). This patch fixes the problem. Signed-off-by: Haiyang Zhang Reviewed-by: K. Y. Srinivasan Signed-off-by: David S. Miller --- drivers/net/hyperv/netvsc_drv.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/hyperv/netvsc_drv.c b/drivers/net/hyperv/netvsc_drv.c index 088c55496191..ab2307b5d9a7 100644 --- a/drivers/net/hyperv/netvsc_drv.c +++ b/drivers/net/hyperv/netvsc_drv.c @@ -31,6 +31,7 @@ #include #include #include +#include #include #include #include @@ -284,7 +285,7 @@ int netvsc_recv_callback(struct hv_device *device_obj, skb->protocol = eth_type_trans(skb, net); skb->ip_summed = CHECKSUM_NONE; - skb->vlan_tci = packet->vlan_tci; + __vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), packet->vlan_tci); net->stats.rx_packets++; net->stats.rx_bytes += packet->total_data_buflen; -- cgit v1.2.3 From 3f108de96ba449a8df3d7e3c053bf890fee2cb95 Mon Sep 17 00:00:00 2001 From: Chen Gang Date: Mon, 27 May 2013 04:57:09 +0000 Subject: parisc: memory overflow, 'name' length is too short for using 'path.bc[i]' can be asigned by PCI_SLOT() which can '> 10', so sizeof(6 * "%u:" + "%u" + '\0') may be 21. Since 'name' length is 20, it may be memory overflow. And 'path.bc[i]' is 'unsigned char' for printing, we can be sure the max length of 'name' must be less than 28. So simplify thinking, we can use 28 instead of 20 directly, and do not think of whether 'patchc.bc[i]' can '> 100'. Signed-off-by: Chen Gang Signed-off-by: Helge Deller --- arch/parisc/kernel/drivers.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/parisc/kernel/drivers.c b/arch/parisc/kernel/drivers.c index 5709c5e59be8..14285caec71a 100644 --- a/arch/parisc/kernel/drivers.c +++ b/arch/parisc/kernel/drivers.c @@ -394,7 +394,7 @@ EXPORT_SYMBOL(print_pci_hwpath); static void setup_bus_id(struct parisc_device *padev) { struct hardware_path path; - char name[20]; + char name[28]; char *output = name; int i; -- cgit v1.2.3 From ae249b5fa27f9fba25aa59664d4338efc2dd2394 Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Tue, 28 May 2013 20:35:54 +0000 Subject: parisc: fix kernel BUG at arch/parisc/include/asm/mmzone.h:50 With CONFIG_DISCONTIGMEM=y and multiple physical memory areas, cat /proc/kpageflags triggers this kernel bug: kernel BUG at arch/parisc/include/asm/mmzone.h:50! CPU: 2 PID: 7848 Comm: cat Tainted: G D W 3.10.0-rc3-64bit #44 IAOQ[0]: kpageflags_read0x128/0x238 IAOQ[1]: kpageflags_read0x12c/0x238 RP(r2): proc_reg_read0xbc/0x130 Backtrace: [<00000000402ca2d4>] proc_reg_read0xbc/0x130 [<0000000040235bcc>] vfs_read0xc4/0x1d0 [<0000000040235f0c>] SyS_read0x94/0xf0 [<0000000040105fc0>] syscall_exit0x0/0x14 kpageflags_read() walks through the whole memory, even if some memory areas are physically not available. So, we should better not BUG on an unavailable pfn in pfn_to_nid() but just return the expected value -1 or 0. Signed-off-by: Helge Deller --- arch/parisc/include/asm/mmzone.h | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/arch/parisc/include/asm/mmzone.h b/arch/parisc/include/asm/mmzone.h index 0e625ab9aaec..cc50d33b7b88 100644 --- a/arch/parisc/include/asm/mmzone.h +++ b/arch/parisc/include/asm/mmzone.h @@ -39,17 +39,14 @@ extern unsigned char pfnnid_map[PFNNID_MAP_MAX]; static inline int pfn_to_nid(unsigned long pfn) { unsigned int i; - unsigned char r; if (unlikely(pfn_is_io(pfn))) return 0; i = pfn >> PFNNID_SHIFT; BUG_ON(i >= ARRAY_SIZE(pfnnid_map)); - r = pfnnid_map[i]; - BUG_ON(r == 0xff); - return (int)r; + return (int)pfnnid_map[i]; } static inline int pfn_valid(int pfn) -- cgit v1.2.3 From 766039022a480ede847659daaa78772bdcc598ae Mon Sep 17 00:00:00 2001 From: Paul Bolle Date: Wed, 29 May 2013 09:56:58 +0000 Subject: parisc: rename "CONFIG_PA7100" to "CONFIG_PA7000" There's a Makefile line setting cflags for CONFIG_PA7100. But that Kconfig macro doesn't exist. There is a Kconfig symbol PA7000, which covers both PA7000 and PA7100 processors. So let's use the corresponding Kconfig macro. Signed-off-by: Paul Bolle Signed-off-by: Helge Deller --- arch/parisc/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/parisc/Makefile b/arch/parisc/Makefile index 197690068f88..96ec3982be8d 100644 --- a/arch/parisc/Makefile +++ b/arch/parisc/Makefile @@ -66,7 +66,7 @@ KBUILD_CFLAGS_KERNEL += -mlong-calls endif # select which processor to optimise for -cflags-$(CONFIG_PA7100) += -march=1.1 -mschedule=7100 +cflags-$(CONFIG_PA7000) += -march=1.1 -mschedule=7100 cflags-$(CONFIG_PA7200) += -march=1.1 -mschedule=7200 cflags-$(CONFIG_PA7100LC) += -march=1.1 -mschedule=7100LC cflags-$(CONFIG_PA7300LC) += -march=1.1 -mschedule=7300 -- cgit v1.2.3 From ea99b1adf22abd62bdcf14b1c9a0a4d3664eefd8 Mon Sep 17 00:00:00 2001 From: Chen Gang Date: Thu, 30 May 2013 01:18:43 +0000 Subject: parisc: kernel: using strlcpy() instead of strcpy() 'boot_args' is an input args, and 'boot_command_line' has a fix length. So use strlcpy() instead of strcpy() to avoid memory overflow. Signed-off-by: Chen Gang Acked-by: Kyle McMartin Signed-off-by: Helge Deller --- arch/parisc/kernel/setup.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/parisc/kernel/setup.c b/arch/parisc/kernel/setup.c index 76b63e726a53..1e95b2000ce8 100644 --- a/arch/parisc/kernel/setup.c +++ b/arch/parisc/kernel/setup.c @@ -69,7 +69,8 @@ void __init setup_cmdline(char **cmdline_p) /* called from hpux boot loader */ boot_command_line[0] = '\0'; } else { - strcpy(boot_command_line, (char *)__va(boot_args[1])); + strlcpy(boot_command_line, (char *)__va(boot_args[1]), + COMMAND_LINE_SIZE); #ifdef CONFIG_BLK_DEV_INITRD if (boot_args[2] != 0) /* did palo pass us a ramdisk? */ -- cgit v1.2.3 From 2b6bac9ee99fa7d60dfa0debd82ccf4217931b1e Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Thu, 30 May 2013 13:48:07 +0000 Subject: MAINTAINERS: update parisc architecture file list Signed-off-by: Helge Deller --- MAINTAINERS | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index 7714c3c363c3..f35a259a6564 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -6088,7 +6088,15 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/jejb/parisc-2.6.git T: git git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux.git S: Maintained F: arch/parisc/ +F: Documentation/parisc/ F: drivers/parisc/ +F: drivers/char/agp/parisc-agp.c +F: drivers/input/serio/gscps2.c +F: drivers/parport/parport_gsc.* +F: drivers/tty/serial/8250/8250_gsc.c +F: drivers/video/sti* +F: drivers/video/console/sti* +F: drivers/video/logo/logo_parisc* PC87360 HARDWARE MONITORING DRIVER M: Jim Cromie -- cgit v1.2.3 From b47d4934e71d918814aee4a1d0211f81329b767e Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Thu, 30 May 2013 11:45:39 -0600 Subject: parisc/PCI: Set type for LBA bus_num resource The non-PAT resource probing code failed to set the type of the LBA bus_num resource (30aa80da43 "parisc/PCI: register busn_res for root buses" did the corresponding thing for the PAT case). This causes incorrect resource assignments and a non-working stifb framebuffer on most parisc machines. Signed-off-by: Bjorn Helgaas Signed-off-by: Helge Deller --- drivers/parisc/lba_pci.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/parisc/lba_pci.c b/drivers/parisc/lba_pci.c index 2ef7103270bb..5d25038ef4b0 100644 --- a/drivers/parisc/lba_pci.c +++ b/drivers/parisc/lba_pci.c @@ -1096,6 +1096,7 @@ lba_legacy_resources(struct parisc_device *pa_dev, struct lba_device *lba_dev) r->name = "LBA PCI Busses"; r->start = lba_num & 0xff; r->end = (lba_num>>8) & 0xff; + r->flags = IORESOURCE_BUS; /* Set up local PCI Bus resources - we don't need them for ** Legacy boxes but it's nice to see in /proc/iomem. -- cgit v1.2.3 From b204a4d2d4f2061659bb5c33f5a4013fb0f6ffbe Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Fri, 31 May 2013 22:24:58 +0000 Subject: parisc/PCI: lba: fix: convert to pci_create_root_bus() for correct root bus resources (v2) commit dc7dce280a Author: Bjorn Helgaas Date: Fri Oct 28 16:27:27 2011 -0600 parisc/PCI: lba: convert to pci_create_root_bus() for correct root bus resources Supply root bus resources to pci_create_root_bus() so they're correct immediately. This fixes the problem of "early" and "header" quirks seeing incorrect root bus resources. added tests for elmmio_space.start while it should use elmmio_space.flags. This for example led to incorrect resource assignments and a non-working stifb framebuffer on most parisc machines. LBA 10:1: PCI host bridge to bus 0000:01 pci_bus 0000:01: root bus resource [io 0x12000-0x13fff] (bus address [0x2000-0x3fff]) pci_bus 0000:01: root bus resource [mem 0xfffffffffa000000-0xfffffffffbffffff] (bus address [0xfa000000-0xfbffffff]) pci_bus 0000:01: root bus resource [mem 0xfffffffff4800000-0xfffffffff4ffffff] (bus address [0xf4800000-0xf4ffffff]) pci_bus 0000:01: root bus resource [??? 0x00000001 flags 0x0] Signed-off-by: Helge Deller Acked-by: Bjorn Helgaas --- drivers/parisc/lba_pci.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/parisc/lba_pci.c b/drivers/parisc/lba_pci.c index 5d25038ef4b0..1f05913ae677 100644 --- a/drivers/parisc/lba_pci.c +++ b/drivers/parisc/lba_pci.c @@ -668,7 +668,7 @@ lba_fixup_bus(struct pci_bus *bus) BUG(); } - if (ldev->hba.elmmio_space.start) { + if (ldev->hba.elmmio_space.flags) { err = request_resource(&iomem_resource, &(ldev->hba.elmmio_space)); if (err < 0) { @@ -993,7 +993,7 @@ lba_pat_resources(struct parisc_device *pa_dev, struct lba_device *lba_dev) case PAT_LMMIO: /* used to fix up pre-initialized MEM BARs */ - if (!lba_dev->hba.lmmio_space.start) { + if (!lba_dev->hba.lmmio_space.flags) { sprintf(lba_dev->hba.lmmio_name, "PCI%02x LMMIO", (int)lba_dev->hba.bus_num.start); @@ -1001,7 +1001,7 @@ lba_pat_resources(struct parisc_device *pa_dev, struct lba_device *lba_dev) io->start; r = &lba_dev->hba.lmmio_space; r->name = lba_dev->hba.lmmio_name; - } else if (!lba_dev->hba.elmmio_space.start) { + } else if (!lba_dev->hba.elmmio_space.flags) { sprintf(lba_dev->hba.elmmio_name, "PCI%02x ELMMIO", (int)lba_dev->hba.bus_num.start); @@ -1495,7 +1495,7 @@ lba_driver_probe(struct parisc_device *dev) pci_add_resource_offset(&resources, &lba_dev->hba.io_space, HBA_PORT_BASE(lba_dev->hba.hba_num)); - if (lba_dev->hba.elmmio_space.start) + if (lba_dev->hba.elmmio_space.flags) pci_add_resource_offset(&resources, &lba_dev->hba.elmmio_space, lba_dev->hba.lmmio_space_offset); if (lba_dev->hba.lmmio_space.flags) -- cgit v1.2.3 From c218c713c56b01d4a1cd69390f675cc44857f5fd Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Thu, 30 May 2013 16:24:46 +0000 Subject: parport_pc: disable PARPORT_PC_SUPERIO on parisc architecture If enabled, CONFIG_PARPORT_PC_SUPERIO scans on PC-like hardware for various super-io chips by accessing i/o ports in a range which will crash any parisc hardware at once. In addition, parisc has it's own incompatible superio chip (CONFIG_SUPERIO), so if we disable PARPORT_PC_SUPERIO completely for parisc we can avoid that people by accident enable the parport_pc superio option too. Signed-off-by: Helge Deller --- drivers/parport/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/parport/Kconfig b/drivers/parport/Kconfig index 24e12d4d1769..a50576081b34 100644 --- a/drivers/parport/Kconfig +++ b/drivers/parport/Kconfig @@ -71,7 +71,7 @@ config PARPORT_PC_FIFO config PARPORT_PC_SUPERIO bool "SuperIO chipset support" - depends on PARPORT_PC + depends on PARPORT_PC && !PARISC help Saying Y here enables some probes for Super-IO chipsets in order to find out things like base addresses, IRQ lines and DMA channels. It -- cgit v1.2.3 From 4edb38695d9a3cd62739f8595e21f36f0aabf4c2 Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Thu, 30 May 2013 21:06:39 +0000 Subject: parisc: parport0: fix this legacy no-device port driver! Fix the above kernel error from parport_announce_port() on 32bit GSC machines (e.g. B160L). The parport driver requires now a pointer to the device struct. Signed-off-by: Helge Deller --- drivers/parport/parport_gsc.c | 6 +++--- drivers/parport/parport_gsc.h | 2 +- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/parport/parport_gsc.c b/drivers/parport/parport_gsc.c index a5251cb5fb0c..6e3a60c78873 100644 --- a/drivers/parport/parport_gsc.c +++ b/drivers/parport/parport_gsc.c @@ -234,7 +234,7 @@ static int parport_PS2_supported(struct parport *pb) struct parport *parport_gsc_probe_port(unsigned long base, unsigned long base_hi, int irq, - int dma, struct pci_dev *dev) + int dma, struct parisc_device *padev) { struct parport_gsc_private *priv; struct parport_operations *ops; @@ -258,7 +258,6 @@ struct parport *parport_gsc_probe_port(unsigned long base, priv->ctr_writable = 0xff; priv->dma_buf = 0; priv->dma_handle = 0; - priv->dev = dev; p->base = base; p->base_hi = base_hi; p->irq = irq; @@ -282,6 +281,7 @@ struct parport *parport_gsc_probe_port(unsigned long base, return NULL; } + p->dev = &padev->dev; p->base_hi = base_hi; p->modes = tmp.modes; p->size = (p->modes & PARPORT_MODE_EPP)?8:3; @@ -373,7 +373,7 @@ static int parport_init_chip(struct parisc_device *dev) } p = parport_gsc_probe_port(port, 0, dev->irq, - /* PARPORT_IRQ_NONE */ PARPORT_DMA_NONE, NULL); + /* PARPORT_IRQ_NONE */ PARPORT_DMA_NONE, dev); if (p) parport_count++; dev_set_drvdata(&dev->dev, p); diff --git a/drivers/parport/parport_gsc.h b/drivers/parport/parport_gsc.h index fc9c37c54022..812214768d27 100644 --- a/drivers/parport/parport_gsc.h +++ b/drivers/parport/parport_gsc.h @@ -217,6 +217,6 @@ extern void parport_gsc_dec_use_count(void); extern struct parport *parport_gsc_probe_port(unsigned long base, unsigned long base_hi, int irq, int dma, - struct pci_dev *dev); + struct parisc_device *padev); #endif /* __DRIVERS_PARPORT_PARPORT_GSC_H */ -- cgit v1.2.3 From 52a2a1087b5924de00484f35ef5e2a73f61dbd22 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Sat, 1 Jun 2013 02:38:35 +0400 Subject: sata_rcar: fix interrupt handling The driver's interrupt handling code is too picky in deciding whether it should handle an interrupt or not which causes completely unneeded spurious interrupts. Thus make sata_rcar_{ata|serr}_interrupt() *void*; add ATA status register read to sata_rcar_ata_interrupt() to clear an unexpected ATA interrupt -- it doesn't get cleared by writing to the SATAINTSTAT register in the interrupt mode we use. Also, in sata_rcar_ata_interrupt() we should check SATAINTSTAT register only for enabled interrupts and we should clear only those interrupts that we have read as active first time around, because else we have a race and risk clearing an interrupt that can occur between read and write of the SATAINTSTAT register and never registering it... Signed-off-by: Sergei Shtylyov Signed-off-by: Tejun Heo Cc: stable@vger.kernel.org --- drivers/ata/sata_rcar.c | 23 +++++++++++------------ 1 file changed, 11 insertions(+), 12 deletions(-) diff --git a/drivers/ata/sata_rcar.c b/drivers/ata/sata_rcar.c index a8e091aafdde..249c8a289bfd 100644 --- a/drivers/ata/sata_rcar.c +++ b/drivers/ata/sata_rcar.c @@ -619,17 +619,16 @@ static struct ata_port_operations sata_rcar_port_ops = { .bmdma_status = sata_rcar_bmdma_status, }; -static int sata_rcar_serr_interrupt(struct ata_port *ap) +static void sata_rcar_serr_interrupt(struct ata_port *ap) { struct sata_rcar_priv *priv = ap->host->private_data; struct ata_eh_info *ehi = &ap->link.eh_info; int freeze = 0; - int handled = 0; u32 serror; serror = ioread32(priv->base + SCRSERR_REG); if (!serror) - return 0; + return; DPRINTK("SError @host_intr: 0x%x\n", serror); @@ -642,7 +641,6 @@ static int sata_rcar_serr_interrupt(struct ata_port *ap) ata_ehi_push_desc(ehi, "%s", "hotplug"); freeze = serror & SERR_COMM_WAKE ? 0 : 1; - handled = 1; } /* freeze or abort */ @@ -650,11 +648,9 @@ static int sata_rcar_serr_interrupt(struct ata_port *ap) ata_port_freeze(ap); else ata_port_abort(ap); - - return handled; } -static int sata_rcar_ata_interrupt(struct ata_port *ap) +static void sata_rcar_ata_interrupt(struct ata_port *ap) { struct ata_queued_cmd *qc; int handled = 0; @@ -663,7 +659,9 @@ static int sata_rcar_ata_interrupt(struct ata_port *ap) if (qc) handled |= ata_bmdma_port_intr(ap, qc); - return handled; + /* be sure to clear ATA interrupt */ + if (!handled) + sata_rcar_check_status(ap); } static irqreturn_t sata_rcar_interrupt(int irq, void *dev_instance) @@ -678,20 +676,21 @@ static irqreturn_t sata_rcar_interrupt(int irq, void *dev_instance) spin_lock_irqsave(&host->lock, flags); sataintstat = ioread32(priv->base + SATAINTSTAT_REG); + sataintstat &= SATA_RCAR_INT_MASK; if (!sataintstat) goto done; /* ack */ - iowrite32(sataintstat & ~SATA_RCAR_INT_MASK, - priv->base + SATAINTSTAT_REG); + iowrite32(~sataintstat & 0x7ff, priv->base + SATAINTSTAT_REG); ap = host->ports[0]; if (sataintstat & SATAINTSTAT_ATA) - handled |= sata_rcar_ata_interrupt(ap); + sata_rcar_ata_interrupt(ap); if (sataintstat & SATAINTSTAT_SERR) - handled |= sata_rcar_serr_interrupt(ap); + sata_rcar_serr_interrupt(ap); + handled = 1; done: spin_unlock_irqrestore(&host->lock, flags); -- cgit v1.2.3 From d683b96b072dc4680fc74964eca77e6a23d1fa6e Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sun, 2 Jun 2013 17:11:17 +0900 Subject: Linux 3.10-rc4 --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index 73e20dba55c1..49aa84b9d2fb 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 3 PATCHLEVEL = 10 SUBLEVEL = 0 -EXTRAVERSION = -rc3 +EXTRAVERSION = -rc4 NAME = Unicycling Gorilla # *DOCUMENTATION* -- cgit v1.2.3 From c87a124a5d5e8cf8e21c4363c3372bcaf53ea190 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Wed, 29 May 2013 09:06:27 +0000 Subject: net: force a reload of first item in hlist_nulls_for_each_entry_rcu Roman Gushchin discovered that udp4_lib_lookup2() was not reloading first item in the rcu protected list, in case the loop was restarted. This produced soft lockups as in https://lkml.org/lkml/2013/4/16/37 rcu_dereference(X)/ACCESS_ONCE(X) seem to not work as intended if X is ptr->field : In some cases, gcc caches the value or ptr->field in a register. Use a barrier() to disallow such caching, as documented in Documentation/atomic_ops.txt line 114 Thanks a lot to Roman for providing analysis and numerous patches. Diagnosed-by: Roman Gushchin Signed-off-by: Eric Dumazet Reported-by: Boris Zhmurov Signed-off-by: Roman Gushchin Acked-by: Paul E. McKenney Signed-off-by: David S. Miller --- include/linux/rculist_nulls.h | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/include/linux/rculist_nulls.h b/include/linux/rculist_nulls.h index 2ae13714828b..1c33dd7da4a7 100644 --- a/include/linux/rculist_nulls.h +++ b/include/linux/rculist_nulls.h @@ -105,9 +105,14 @@ static inline void hlist_nulls_add_head_rcu(struct hlist_nulls_node *n, * @head: the head for your list. * @member: the name of the hlist_nulls_node within the struct. * + * The barrier() is needed to make sure compiler doesn't cache first element [1], + * as this loop can be restarted [2] + * [1] Documentation/atomic_ops.txt around line 114 + * [2] Documentation/RCU/rculist_nulls.txt around line 146 */ #define hlist_nulls_for_each_entry_rcu(tpos, pos, head, member) \ - for (pos = rcu_dereference_raw(hlist_nulls_first_rcu(head)); \ + for (({barrier();}), \ + pos = rcu_dereference_raw(hlist_nulls_first_rcu(head)); \ (!is_a_nulls(pos)) && \ ({ tpos = hlist_nulls_entry(pos, typeof(*tpos), member); 1; }); \ pos = rcu_dereference_raw(hlist_nulls_next_rcu(pos))) -- cgit v1.2.3 From 01cb71d2d47b78354358e4bb938bb06323e17498 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Sun, 2 Jun 2013 13:55:05 +0000 Subject: net_sched: restore "overhead xxx" handling commit 56b765b79 ("htb: improved accuracy at high rates") broke the "overhead xxx" handling, as well as the "linklayer atm" attribute. tc class add ... htb rate X ceil Y linklayer atm overhead 10 This patch restores the "overhead xxx" handling, for htb, tbf and act_police The "linklayer atm" thing needs a separate fix. Reported-by: Jesper Dangaard Brouer Signed-off-by: Eric Dumazet Cc: Vimalkumar Cc: Jiri Pirko Signed-off-by: David S. Miller --- include/net/sch_generic.h | 18 +++++++++++------- net/sched/act_police.c | 8 ++++---- net/sched/sch_generic.c | 8 +++++--- net/sched/sch_htb.c | 8 ++++---- net/sched/sch_tbf.c | 8 ++++---- 5 files changed, 28 insertions(+), 22 deletions(-) diff --git a/include/net/sch_generic.h b/include/net/sch_generic.h index f10818fc8804..e7f4e21cc3e1 100644 --- a/include/net/sch_generic.h +++ b/include/net/sch_generic.h @@ -679,22 +679,26 @@ static inline struct sk_buff *skb_act_clone(struct sk_buff *skb, gfp_t gfp_mask, #endif struct psched_ratecfg { - u64 rate_bps; - u32 mult; - u32 shift; + u64 rate_bps; + u32 mult; + u16 overhead; + u8 shift; }; static inline u64 psched_l2t_ns(const struct psched_ratecfg *r, unsigned int len) { - return ((u64)len * r->mult) >> r->shift; + return ((u64)(len + r->overhead) * r->mult) >> r->shift; } -extern void psched_ratecfg_precompute(struct psched_ratecfg *r, u32 rate); +extern void psched_ratecfg_precompute(struct psched_ratecfg *r, const struct tc_ratespec *conf); -static inline u32 psched_ratecfg_getrate(const struct psched_ratecfg *r) +static inline void psched_ratecfg_getrate(struct tc_ratespec *res, + const struct psched_ratecfg *r) { - return r->rate_bps >> 3; + memset(res, 0, sizeof(*res)); + res->rate = r->rate_bps >> 3; + res->overhead = r->overhead; } #endif diff --git a/net/sched/act_police.c b/net/sched/act_police.c index 823463adbd21..189e3c5b3d09 100644 --- a/net/sched/act_police.c +++ b/net/sched/act_police.c @@ -231,14 +231,14 @@ override: } if (R_tab) { police->rate_present = true; - psched_ratecfg_precompute(&police->rate, R_tab->rate.rate); + psched_ratecfg_precompute(&police->rate, &R_tab->rate); qdisc_put_rtab(R_tab); } else { police->rate_present = false; } if (P_tab) { police->peak_present = true; - psched_ratecfg_precompute(&police->peak, P_tab->rate.rate); + psched_ratecfg_precompute(&police->peak, &P_tab->rate); qdisc_put_rtab(P_tab); } else { police->peak_present = false; @@ -376,9 +376,9 @@ tcf_act_police_dump(struct sk_buff *skb, struct tc_action *a, int bind, int ref) }; if (police->rate_present) - opt.rate.rate = psched_ratecfg_getrate(&police->rate); + psched_ratecfg_getrate(&opt.rate, &police->rate); if (police->peak_present) - opt.peakrate.rate = psched_ratecfg_getrate(&police->peak); + psched_ratecfg_getrate(&opt.peakrate, &police->peak); if (nla_put(skb, TCA_POLICE_TBF, sizeof(opt), &opt)) goto nla_put_failure; if (police->tcfp_result && diff --git a/net/sched/sch_generic.c b/net/sched/sch_generic.c index eac7e0ee23c1..20224086cc28 100644 --- a/net/sched/sch_generic.c +++ b/net/sched/sch_generic.c @@ -898,14 +898,16 @@ void dev_shutdown(struct net_device *dev) WARN_ON(timer_pending(&dev->watchdog_timer)); } -void psched_ratecfg_precompute(struct psched_ratecfg *r, u32 rate) +void psched_ratecfg_precompute(struct psched_ratecfg *r, + const struct tc_ratespec *conf) { u64 factor; u64 mult; int shift; - r->rate_bps = (u64)rate << 3; - r->shift = 0; + memset(r, 0, sizeof(*r)); + r->overhead = conf->overhead; + r->rate_bps = (u64)conf->rate << 3; r->mult = 1; /* * Calibrate mult, shift so that token counting is accurate diff --git a/net/sched/sch_htb.c b/net/sched/sch_htb.c index 79b1876b6cd2..f87fb850b7ef 100644 --- a/net/sched/sch_htb.c +++ b/net/sched/sch_htb.c @@ -1090,9 +1090,9 @@ static int htb_dump_class(struct Qdisc *sch, unsigned long arg, memset(&opt, 0, sizeof(opt)); - opt.rate.rate = psched_ratecfg_getrate(&cl->rate); + psched_ratecfg_getrate(&opt.rate, &cl->rate); opt.buffer = PSCHED_NS2TICKS(cl->buffer); - opt.ceil.rate = psched_ratecfg_getrate(&cl->ceil); + psched_ratecfg_getrate(&opt.ceil, &cl->ceil); opt.cbuffer = PSCHED_NS2TICKS(cl->cbuffer); opt.quantum = cl->quantum; opt.prio = cl->prio; @@ -1459,8 +1459,8 @@ static int htb_change_class(struct Qdisc *sch, u32 classid, cl->prio = TC_HTB_NUMPRIO - 1; } - psched_ratecfg_precompute(&cl->rate, hopt->rate.rate); - psched_ratecfg_precompute(&cl->ceil, hopt->ceil.rate); + psched_ratecfg_precompute(&cl->rate, &hopt->rate); + psched_ratecfg_precompute(&cl->ceil, &hopt->ceil); cl->buffer = PSCHED_TICKS2NS(hopt->buffer); cl->cbuffer = PSCHED_TICKS2NS(hopt->buffer); diff --git a/net/sched/sch_tbf.c b/net/sched/sch_tbf.c index c8388f3c3426..e478d316602b 100644 --- a/net/sched/sch_tbf.c +++ b/net/sched/sch_tbf.c @@ -298,9 +298,9 @@ static int tbf_change(struct Qdisc *sch, struct nlattr *opt) q->tokens = q->buffer; q->ptokens = q->mtu; - psched_ratecfg_precompute(&q->rate, rtab->rate.rate); + psched_ratecfg_precompute(&q->rate, &rtab->rate); if (ptab) { - psched_ratecfg_precompute(&q->peak, ptab->rate.rate); + psched_ratecfg_precompute(&q->peak, &ptab->rate); q->peak_present = true; } else { q->peak_present = false; @@ -350,9 +350,9 @@ static int tbf_dump(struct Qdisc *sch, struct sk_buff *skb) goto nla_put_failure; opt.limit = q->limit; - opt.rate.rate = psched_ratecfg_getrate(&q->rate); + psched_ratecfg_getrate(&opt.rate, &q->rate); if (q->peak_present) - opt.peakrate.rate = psched_ratecfg_getrate(&q->peak); + psched_ratecfg_getrate(&opt.peakrate, &q->peak); else memset(&opt.peakrate, 0, sizeof(opt.peakrate)); opt.mtu = PSCHED_NS2TICKS(q->mtu); -- cgit v1.2.3 From 1f3dc6d76424538efb2095055035254b14499c77 Mon Sep 17 00:00:00 2001 From: David Daney Date: Thu, 23 May 2013 09:49:05 -0700 Subject: mips/kvm: Fix ABI for use of FPU. Define a non-empty struct kvm_fpu. Signed-off-by: David Daney Acked-by: Sanjay Lal Signed-off-by: Paolo Bonzini --- arch/mips/include/uapi/asm/kvm.h | 29 +++++++++++++++++++++-------- 1 file changed, 21 insertions(+), 8 deletions(-) diff --git a/arch/mips/include/uapi/asm/kvm.h b/arch/mips/include/uapi/asm/kvm.h index 85789eacbf18..0e8f5658c03e 100644 --- a/arch/mips/include/uapi/asm/kvm.h +++ b/arch/mips/include/uapi/asm/kvm.h @@ -1,11 +1,12 @@ /* -* This file is subject to the terms and conditions of the GNU General Public -* License. See the file "COPYING" in the main directory of this archive -* for more details. -* -* Copyright (C) 2012 MIPS Technologies, Inc. All rights reserved. -* Authors: Sanjay Lal -*/ + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2012 MIPS Technologies, Inc. All rights reserved. + * Copyright (C) 2013 Cavium, Inc. + * Authors: Sanjay Lal + */ #ifndef __LINUX_KVM_MIPS_H #define __LINUX_KVM_MIPS_H @@ -31,8 +32,20 @@ struct kvm_regs { struct kvm_sregs { }; -/* for KVM_GET_FPU and KVM_SET_FPU */ +/* + * for KVM_GET_FPU and KVM_SET_FPU + * + * If Status[FR] is zero (32-bit FPU), the upper 32-bits of the FPRs + * are zero filled. + */ struct kvm_fpu { + __u64 fpr[32]; + __u32 fir; + __u32 fccr; + __u32 fexr; + __u32 fenr; + __u32 fcsr; + __u32 pad; }; struct kvm_debug_exit_arch { -- cgit v1.2.3 From 688cded320a4760de679160b42f9a81face02674 Mon Sep 17 00:00:00 2001 From: David Daney Date: Thu, 23 May 2013 09:49:06 -0700 Subject: mips/kvm: Fix ABI for use of 64-bit registers. All registers are 64-bits wide, 32-bit guests use the least significant portion of the register storage fields. Signed-off-by: David Daney Acked-by: Sanjay Lal Signed-off-by: Paolo Bonzini --- arch/mips/include/uapi/asm/kvm.h | 16 +++++++++++----- 1 file changed, 11 insertions(+), 5 deletions(-) diff --git a/arch/mips/include/uapi/asm/kvm.h b/arch/mips/include/uapi/asm/kvm.h index 0e8f5658c03e..86812fb61842 100644 --- a/arch/mips/include/uapi/asm/kvm.h +++ b/arch/mips/include/uapi/asm/kvm.h @@ -18,12 +18,18 @@ #define N_MIPS_COPROC_REGS 32 #define N_MIPS_COPROC_SEL 8 -/* for KVM_GET_REGS and KVM_SET_REGS */ +/* + * for KVM_GET_REGS and KVM_SET_REGS + * + * If Config[AT] is zero (32-bit CPU), the register contents are + * stored in the lower 32-bits of the struct kvm_regs fields and sign + * extended to 64-bits. + */ struct kvm_regs { - __u32 gprs[32]; - __u32 hi; - __u32 lo; - __u32 pc; + __u64 gprs[32]; + __u64 hi; + __u64 lo; + __u64 pc; __u32 cp0reg[N_MIPS_COPROC_REGS][N_MIPS_COPROC_SEL]; }; -- cgit v1.2.3 From bf32ebf66d74e8a196256d7ac2a4f3c6938c614a Mon Sep 17 00:00:00 2001 From: David Daney Date: Thu, 23 May 2013 09:49:07 -0700 Subject: mips/kvm: Fix name of gpr field in struct kvm_regs. Signed-off-by: David Daney Acked-by: Sanjay Lal Signed-off-by: Paolo Bonzini --- arch/mips/include/uapi/asm/kvm.h | 3 ++- arch/mips/kvm/kvm_mips.c | 4 ++-- 2 files changed, 4 insertions(+), 3 deletions(-) diff --git a/arch/mips/include/uapi/asm/kvm.h b/arch/mips/include/uapi/asm/kvm.h index 86812fb61842..d145ead16b2c 100644 --- a/arch/mips/include/uapi/asm/kvm.h +++ b/arch/mips/include/uapi/asm/kvm.h @@ -26,7 +26,8 @@ * extended to 64-bits. */ struct kvm_regs { - __u64 gprs[32]; + /* out (KVM_GET_REGS) / in (KVM_SET_REGS) */ + __u64 gpr[32]; __u64 hi; __u64 lo; __u64 pc; diff --git a/arch/mips/kvm/kvm_mips.c b/arch/mips/kvm/kvm_mips.c index e0dad0289797..93da7508c6b6 100644 --- a/arch/mips/kvm/kvm_mips.c +++ b/arch/mips/kvm/kvm_mips.c @@ -678,7 +678,7 @@ int kvm_arch_vcpu_ioctl_set_regs(struct kvm_vcpu *vcpu, struct kvm_regs *regs) int i; for (i = 0; i < 32; i++) - vcpu->arch.gprs[i] = regs->gprs[i]; + vcpu->arch.gprs[i] = regs->gpr[i]; vcpu->arch.hi = regs->hi; vcpu->arch.lo = regs->lo; @@ -692,7 +692,7 @@ int kvm_arch_vcpu_ioctl_get_regs(struct kvm_vcpu *vcpu, struct kvm_regs *regs) int i; for (i = 0; i < 32; i++) - regs->gprs[i] = vcpu->arch.gprs[i]; + regs->gpr[i] = vcpu->arch.gprs[i]; regs->hi = vcpu->arch.hi; regs->lo = vcpu->arch.lo; -- cgit v1.2.3 From 8d17dd041a548b016ff401d36be6b2563c940ed5 Mon Sep 17 00:00:00 2001 From: David Daney Date: Thu, 23 May 2013 09:49:08 -0700 Subject: mips/kvm: Use ARRAY_SIZE() instead of hardcoded constants in kvm_arch_vcpu_ioctl_{s,g}et_regs Also we cannot set special zero register, so force it to zero. Signed-off-by: David Daney Acked-by: Sanjay Lal Signed-off-by: Paolo Bonzini --- arch/mips/kvm/kvm_mips.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/mips/kvm/kvm_mips.c b/arch/mips/kvm/kvm_mips.c index 93da7508c6b6..71a1fc191078 100644 --- a/arch/mips/kvm/kvm_mips.c +++ b/arch/mips/kvm/kvm_mips.c @@ -677,9 +677,9 @@ int kvm_arch_vcpu_ioctl_set_regs(struct kvm_vcpu *vcpu, struct kvm_regs *regs) { int i; - for (i = 0; i < 32; i++) + for (i = 1; i < ARRAY_SIZE(vcpu->arch.gprs); i++) vcpu->arch.gprs[i] = regs->gpr[i]; - + vcpu->arch.gprs[0] = 0; /* zero is special, and cannot be set. */ vcpu->arch.hi = regs->hi; vcpu->arch.lo = regs->lo; vcpu->arch.pc = regs->pc; @@ -691,7 +691,7 @@ int kvm_arch_vcpu_ioctl_get_regs(struct kvm_vcpu *vcpu, struct kvm_regs *regs) { int i; - for (i = 0; i < 32; i++) + for (i = 0; i < ARRAY_SIZE(vcpu->arch.gprs); i++) regs->gpr[i] = vcpu->arch.gprs[i]; regs->hi = vcpu->arch.hi; -- cgit v1.2.3 From 4c73fb2b05192f2c817940b38015c36007379380 Mon Sep 17 00:00:00 2001 From: David Daney Date: Thu, 23 May 2013 09:49:09 -0700 Subject: mips/kvm: Fix ABI by moving manipulation of CP0 registers to KVM_{G,S}ET_ONE_REG Because not all 256 CP0 registers are ever implemented, we need a different method of manipulating them. Use the KVM_SET_ONE_REG/KVM_GET_ONE_REG mechanism. Now unused code and definitions are removed. Signed-off-by: David Daney Acked-by: Sanjay Lal Signed-off-by: Paolo Bonzini --- arch/mips/include/asm/kvm_host.h | 4 - arch/mips/include/uapi/asm/kvm.h | 91 +++++++++++--- arch/mips/kvm/kvm_mips.c | 252 +++++++++++++++++++++++++++++++++++++-- arch/mips/kvm/kvm_trap_emul.c | 50 -------- 4 files changed, 322 insertions(+), 75 deletions(-) diff --git a/arch/mips/include/asm/kvm_host.h b/arch/mips/include/asm/kvm_host.h index 143875c6c95a..4d6fa0bf1305 100644 --- a/arch/mips/include/asm/kvm_host.h +++ b/arch/mips/include/asm/kvm_host.h @@ -496,10 +496,6 @@ struct kvm_mips_callbacks { uint32_t cause); int (*irq_clear) (struct kvm_vcpu *vcpu, unsigned int priority, uint32_t cause); - int (*vcpu_ioctl_get_regs) (struct kvm_vcpu *vcpu, - struct kvm_regs *regs); - int (*vcpu_ioctl_set_regs) (struct kvm_vcpu *vcpu, - struct kvm_regs *regs); }; extern struct kvm_mips_callbacks *kvm_mips_callbacks; int kvm_mips_emulation_init(struct kvm_mips_callbacks **install_callbacks); diff --git a/arch/mips/include/uapi/asm/kvm.h b/arch/mips/include/uapi/asm/kvm.h index d145ead16b2c..3f424f5217da 100644 --- a/arch/mips/include/uapi/asm/kvm.h +++ b/arch/mips/include/uapi/asm/kvm.h @@ -13,10 +13,11 @@ #include -#define __KVM_MIPS - -#define N_MIPS_COPROC_REGS 32 -#define N_MIPS_COPROC_SEL 8 +/* + * KVM MIPS specific structures and definitions. + * + * Some parts derived from the x86 version of this file. + */ /* * for KVM_GET_REGS and KVM_SET_REGS @@ -31,12 +32,6 @@ struct kvm_regs { __u64 hi; __u64 lo; __u64 pc; - - __u32 cp0reg[N_MIPS_COPROC_REGS][N_MIPS_COPROC_SEL]; -}; - -/* for KVM_GET_SREGS and KVM_SET_SREGS */ -struct kvm_sregs { }; /* @@ -55,21 +50,89 @@ struct kvm_fpu { __u32 pad; }; + +/* + * For MIPS, we use KVM_SET_ONE_REG and KVM_GET_ONE_REG to access CP0 + * registers. The id field is broken down as follows: + * + * bits[2..0] - Register 'sel' index. + * bits[7..3] - Register 'rd' index. + * bits[15..8] - Must be zero. + * bits[63..16] - 1 -> CP0 registers. + * + * Other sets registers may be added in the future. Each set would + * have its own identifier in bits[63..16]. + * + * The addr field of struct kvm_one_reg must point to an aligned + * 64-bit wide location. For registers that are narrower than + * 64-bits, the value is stored in the low order bits of the location, + * and sign extended to 64-bits. + * + * The registers defined in struct kvm_regs are also accessible, the + * id values for these are below. + */ + +#define KVM_REG_MIPS_R0 0 +#define KVM_REG_MIPS_R1 1 +#define KVM_REG_MIPS_R2 2 +#define KVM_REG_MIPS_R3 3 +#define KVM_REG_MIPS_R4 4 +#define KVM_REG_MIPS_R5 5 +#define KVM_REG_MIPS_R6 6 +#define KVM_REG_MIPS_R7 7 +#define KVM_REG_MIPS_R8 8 +#define KVM_REG_MIPS_R9 9 +#define KVM_REG_MIPS_R10 10 +#define KVM_REG_MIPS_R11 11 +#define KVM_REG_MIPS_R12 12 +#define KVM_REG_MIPS_R13 13 +#define KVM_REG_MIPS_R14 14 +#define KVM_REG_MIPS_R15 15 +#define KVM_REG_MIPS_R16 16 +#define KVM_REG_MIPS_R17 17 +#define KVM_REG_MIPS_R18 18 +#define KVM_REG_MIPS_R19 19 +#define KVM_REG_MIPS_R20 20 +#define KVM_REG_MIPS_R21 21 +#define KVM_REG_MIPS_R22 22 +#define KVM_REG_MIPS_R23 23 +#define KVM_REG_MIPS_R24 24 +#define KVM_REG_MIPS_R25 25 +#define KVM_REG_MIPS_R26 26 +#define KVM_REG_MIPS_R27 27 +#define KVM_REG_MIPS_R28 28 +#define KVM_REG_MIPS_R29 29 +#define KVM_REG_MIPS_R30 30 +#define KVM_REG_MIPS_R31 31 + +#define KVM_REG_MIPS_HI 32 +#define KVM_REG_MIPS_LO 33 +#define KVM_REG_MIPS_PC 34 + +/* + * KVM MIPS specific structures and definitions + * + */ struct kvm_debug_exit_arch { + __u64 epc; }; /* for KVM_SET_GUEST_DEBUG */ struct kvm_guest_debug_arch { }; +/* definition of registers in kvm_run */ +struct kvm_sync_regs { +}; + +/* dummy definition */ +struct kvm_sregs { +}; + struct kvm_mips_interrupt { /* in */ __u32 cpu; __u32 irq; }; -/* definition of registers in kvm_run */ -struct kvm_sync_regs { -}; - #endif /* __LINUX_KVM_MIPS_H */ diff --git a/arch/mips/kvm/kvm_mips.c b/arch/mips/kvm/kvm_mips.c index 71a1fc191078..3caa0062ac1f 100644 --- a/arch/mips/kvm/kvm_mips.c +++ b/arch/mips/kvm/kvm_mips.c @@ -485,15 +485,253 @@ kvm_arch_vcpu_ioctl_set_mpstate(struct kvm_vcpu *vcpu, return -EINVAL; } +#define KVM_REG_MIPS_CP0_INDEX (0x10000 + 8 * 0 + 0) +#define KVM_REG_MIPS_CP0_ENTRYLO0 (0x10000 + 8 * 2 + 0) +#define KVM_REG_MIPS_CP0_ENTRYLO1 (0x10000 + 8 * 3 + 0) +#define KVM_REG_MIPS_CP0_CONTEXT (0x10000 + 8 * 4 + 0) +#define KVM_REG_MIPS_CP0_USERLOCAL (0x10000 + 8 * 4 + 2) +#define KVM_REG_MIPS_CP0_PAGEMASK (0x10000 + 8 * 5 + 0) +#define KVM_REG_MIPS_CP0_PAGEGRAIN (0x10000 + 8 * 5 + 1) +#define KVM_REG_MIPS_CP0_WIRED (0x10000 + 8 * 6 + 0) +#define KVM_REG_MIPS_CP0_HWRENA (0x10000 + 8 * 7 + 0) +#define KVM_REG_MIPS_CP0_BADVADDR (0x10000 + 8 * 8 + 0) +#define KVM_REG_MIPS_CP0_COUNT (0x10000 + 8 * 9 + 0) +#define KVM_REG_MIPS_CP0_ENTRYHI (0x10000 + 8 * 10 + 0) +#define KVM_REG_MIPS_CP0_COMPARE (0x10000 + 8 * 11 + 0) +#define KVM_REG_MIPS_CP0_STATUS (0x10000 + 8 * 12 + 0) +#define KVM_REG_MIPS_CP0_CAUSE (0x10000 + 8 * 13 + 0) +#define KVM_REG_MIPS_CP0_EBASE (0x10000 + 8 * 15 + 1) +#define KVM_REG_MIPS_CP0_CONFIG (0x10000 + 8 * 16 + 0) +#define KVM_REG_MIPS_CP0_CONFIG1 (0x10000 + 8 * 16 + 1) +#define KVM_REG_MIPS_CP0_CONFIG2 (0x10000 + 8 * 16 + 2) +#define KVM_REG_MIPS_CP0_CONFIG3 (0x10000 + 8 * 16 + 3) +#define KVM_REG_MIPS_CP0_CONFIG7 (0x10000 + 8 * 16 + 7) +#define KVM_REG_MIPS_CP0_XCONTEXT (0x10000 + 8 * 20 + 0) +#define KVM_REG_MIPS_CP0_ERROREPC (0x10000 + 8 * 30 + 0) + +static u64 kvm_mips_get_one_regs[] = { + KVM_REG_MIPS_R0, + KVM_REG_MIPS_R1, + KVM_REG_MIPS_R2, + KVM_REG_MIPS_R3, + KVM_REG_MIPS_R4, + KVM_REG_MIPS_R5, + KVM_REG_MIPS_R6, + KVM_REG_MIPS_R7, + KVM_REG_MIPS_R8, + KVM_REG_MIPS_R9, + KVM_REG_MIPS_R10, + KVM_REG_MIPS_R11, + KVM_REG_MIPS_R12, + KVM_REG_MIPS_R13, + KVM_REG_MIPS_R14, + KVM_REG_MIPS_R15, + KVM_REG_MIPS_R16, + KVM_REG_MIPS_R17, + KVM_REG_MIPS_R18, + KVM_REG_MIPS_R19, + KVM_REG_MIPS_R20, + KVM_REG_MIPS_R21, + KVM_REG_MIPS_R22, + KVM_REG_MIPS_R23, + KVM_REG_MIPS_R24, + KVM_REG_MIPS_R25, + KVM_REG_MIPS_R26, + KVM_REG_MIPS_R27, + KVM_REG_MIPS_R28, + KVM_REG_MIPS_R29, + KVM_REG_MIPS_R30, + KVM_REG_MIPS_R31, + + KVM_REG_MIPS_HI, + KVM_REG_MIPS_LO, + KVM_REG_MIPS_PC, + + KVM_REG_MIPS_CP0_INDEX, + KVM_REG_MIPS_CP0_CONTEXT, + KVM_REG_MIPS_CP0_PAGEMASK, + KVM_REG_MIPS_CP0_WIRED, + KVM_REG_MIPS_CP0_BADVADDR, + KVM_REG_MIPS_CP0_ENTRYHI, + KVM_REG_MIPS_CP0_STATUS, + KVM_REG_MIPS_CP0_CAUSE, + /* EPC set via kvm_regs, et al. */ + KVM_REG_MIPS_CP0_CONFIG, + KVM_REG_MIPS_CP0_CONFIG1, + KVM_REG_MIPS_CP0_CONFIG2, + KVM_REG_MIPS_CP0_CONFIG3, + KVM_REG_MIPS_CP0_CONFIG7, + KVM_REG_MIPS_CP0_ERROREPC +}; + +static int kvm_mips_get_reg(struct kvm_vcpu *vcpu, + const struct kvm_one_reg *reg) +{ + u64 __user *uaddr = (u64 __user *)(long)reg->addr; + + struct mips_coproc *cop0 = vcpu->arch.cop0; + s64 v; + + switch (reg->id) { + case KVM_REG_MIPS_R0 ... KVM_REG_MIPS_R31: + v = (long)vcpu->arch.gprs[reg->id - KVM_REG_MIPS_R0]; + break; + case KVM_REG_MIPS_HI: + v = (long)vcpu->arch.hi; + break; + case KVM_REG_MIPS_LO: + v = (long)vcpu->arch.lo; + break; + case KVM_REG_MIPS_PC: + v = (long)vcpu->arch.pc; + break; + + case KVM_REG_MIPS_CP0_INDEX: + v = (long)kvm_read_c0_guest_index(cop0); + break; + case KVM_REG_MIPS_CP0_CONTEXT: + v = (long)kvm_read_c0_guest_context(cop0); + break; + case KVM_REG_MIPS_CP0_PAGEMASK: + v = (long)kvm_read_c0_guest_pagemask(cop0); + break; + case KVM_REG_MIPS_CP0_WIRED: + v = (long)kvm_read_c0_guest_wired(cop0); + break; + case KVM_REG_MIPS_CP0_BADVADDR: + v = (long)kvm_read_c0_guest_badvaddr(cop0); + break; + case KVM_REG_MIPS_CP0_ENTRYHI: + v = (long)kvm_read_c0_guest_entryhi(cop0); + break; + case KVM_REG_MIPS_CP0_STATUS: + v = (long)kvm_read_c0_guest_status(cop0); + break; + case KVM_REG_MIPS_CP0_CAUSE: + v = (long)kvm_read_c0_guest_cause(cop0); + break; + case KVM_REG_MIPS_CP0_ERROREPC: + v = (long)kvm_read_c0_guest_errorepc(cop0); + break; + case KVM_REG_MIPS_CP0_CONFIG: + v = (long)kvm_read_c0_guest_config(cop0); + break; + case KVM_REG_MIPS_CP0_CONFIG1: + v = (long)kvm_read_c0_guest_config1(cop0); + break; + case KVM_REG_MIPS_CP0_CONFIG2: + v = (long)kvm_read_c0_guest_config2(cop0); + break; + case KVM_REG_MIPS_CP0_CONFIG3: + v = (long)kvm_read_c0_guest_config3(cop0); + break; + case KVM_REG_MIPS_CP0_CONFIG7: + v = (long)kvm_read_c0_guest_config7(cop0); + break; + default: + return -EINVAL; + } + return put_user(v, uaddr); +} + +static int kvm_mips_set_reg(struct kvm_vcpu *vcpu, + const struct kvm_one_reg *reg) +{ + u64 __user *uaddr = (u64 __user *)(long)reg->addr; + struct mips_coproc *cop0 = vcpu->arch.cop0; + u64 v; + + if (get_user(v, uaddr) != 0) + return -EFAULT; + + switch (reg->id) { + case KVM_REG_MIPS_R0: + /* Silently ignore requests to set $0 */ + break; + case KVM_REG_MIPS_R1 ... KVM_REG_MIPS_R31: + vcpu->arch.gprs[reg->id - KVM_REG_MIPS_R0] = v; + break; + case KVM_REG_MIPS_HI: + vcpu->arch.hi = v; + break; + case KVM_REG_MIPS_LO: + vcpu->arch.lo = v; + break; + case KVM_REG_MIPS_PC: + vcpu->arch.pc = v; + break; + + case KVM_REG_MIPS_CP0_INDEX: + kvm_write_c0_guest_index(cop0, v); + break; + case KVM_REG_MIPS_CP0_CONTEXT: + kvm_write_c0_guest_context(cop0, v); + break; + case KVM_REG_MIPS_CP0_PAGEMASK: + kvm_write_c0_guest_pagemask(cop0, v); + break; + case KVM_REG_MIPS_CP0_WIRED: + kvm_write_c0_guest_wired(cop0, v); + break; + case KVM_REG_MIPS_CP0_BADVADDR: + kvm_write_c0_guest_badvaddr(cop0, v); + break; + case KVM_REG_MIPS_CP0_ENTRYHI: + kvm_write_c0_guest_entryhi(cop0, v); + break; + case KVM_REG_MIPS_CP0_STATUS: + kvm_write_c0_guest_status(cop0, v); + break; + case KVM_REG_MIPS_CP0_CAUSE: + kvm_write_c0_guest_cause(cop0, v); + break; + case KVM_REG_MIPS_CP0_ERROREPC: + kvm_write_c0_guest_errorepc(cop0, v); + break; + default: + return -EINVAL; + } + return 0; +} + long kvm_arch_vcpu_ioctl(struct file *filp, unsigned int ioctl, unsigned long arg) { struct kvm_vcpu *vcpu = filp->private_data; void __user *argp = (void __user *)arg; long r; - int intr; switch (ioctl) { + case KVM_SET_ONE_REG: + case KVM_GET_ONE_REG: { + struct kvm_one_reg reg; + if (copy_from_user(®, argp, sizeof(reg))) + return -EFAULT; + if (ioctl == KVM_SET_ONE_REG) + return kvm_mips_set_reg(vcpu, ®); + else + return kvm_mips_get_reg(vcpu, ®); + } + case KVM_GET_REG_LIST: { + struct kvm_reg_list __user *user_list = argp; + u64 __user *reg_dest; + struct kvm_reg_list reg_list; + unsigned n; + + if (copy_from_user(®_list, user_list, sizeof(reg_list))) + return -EFAULT; + n = reg_list.n; + reg_list.n = ARRAY_SIZE(kvm_mips_get_one_regs); + if (copy_to_user(user_list, ®_list, sizeof(reg_list))) + return -EFAULT; + if (n < reg_list.n) + return -E2BIG; + reg_dest = user_list->reg; + if (copy_to_user(reg_dest, kvm_mips_get_one_regs, + sizeof(kvm_mips_get_one_regs))) + return -EFAULT; + return 0; + } case KVM_NMI: /* Treat the NMI as a CPU reset */ r = kvm_mips_reset_vcpu(vcpu); @@ -505,8 +743,6 @@ kvm_arch_vcpu_ioctl(struct file *filp, unsigned int ioctl, unsigned long arg) if (copy_from_user(&irq, argp, sizeof(irq))) goto out; - intr = (int)irq.irq; - kvm_debug("[%d] %s: irq: %d\n", vcpu->vcpu_id, __func__, irq.irq); @@ -514,7 +750,7 @@ kvm_arch_vcpu_ioctl(struct file *filp, unsigned int ioctl, unsigned long arg) break; } default: - r = -EINVAL; + r = -ENOIOCTLCMD; } out: @@ -627,6 +863,9 @@ int kvm_dev_ioctl_check_extension(long ext) int r; switch (ext) { + case KVM_CAP_ONE_REG: + r = 1; + break; case KVM_CAP_COALESCED_MMIO: r = KVM_COALESCED_MMIO_PAGE_OFFSET; break; @@ -635,7 +874,6 @@ int kvm_dev_ioctl_check_extension(long ext) break; } return r; - } int kvm_cpu_has_pending_timer(struct kvm_vcpu *vcpu) @@ -684,7 +922,7 @@ int kvm_arch_vcpu_ioctl_set_regs(struct kvm_vcpu *vcpu, struct kvm_regs *regs) vcpu->arch.lo = regs->lo; vcpu->arch.pc = regs->pc; - return kvm_mips_callbacks->vcpu_ioctl_set_regs(vcpu, regs); + return 0; } int kvm_arch_vcpu_ioctl_get_regs(struct kvm_vcpu *vcpu, struct kvm_regs *regs) @@ -698,7 +936,7 @@ int kvm_arch_vcpu_ioctl_get_regs(struct kvm_vcpu *vcpu, struct kvm_regs *regs) regs->lo = vcpu->arch.lo; regs->pc = vcpu->arch.pc; - return kvm_mips_callbacks->vcpu_ioctl_get_regs(vcpu, regs); + return 0; } void kvm_mips_comparecount_func(unsigned long data) diff --git a/arch/mips/kvm/kvm_trap_emul.c b/arch/mips/kvm/kvm_trap_emul.c index 466aeef044bd..30d725321db1 100644 --- a/arch/mips/kvm/kvm_trap_emul.c +++ b/arch/mips/kvm/kvm_trap_emul.c @@ -345,54 +345,6 @@ static int kvm_trap_emul_handle_break(struct kvm_vcpu *vcpu) return ret; } -static int -kvm_trap_emul_ioctl_set_regs(struct kvm_vcpu *vcpu, struct kvm_regs *regs) -{ - struct mips_coproc *cop0 = vcpu->arch.cop0; - - kvm_write_c0_guest_index(cop0, regs->cp0reg[MIPS_CP0_TLB_INDEX][0]); - kvm_write_c0_guest_context(cop0, regs->cp0reg[MIPS_CP0_TLB_CONTEXT][0]); - kvm_write_c0_guest_badvaddr(cop0, regs->cp0reg[MIPS_CP0_BAD_VADDR][0]); - kvm_write_c0_guest_entryhi(cop0, regs->cp0reg[MIPS_CP0_TLB_HI][0]); - kvm_write_c0_guest_epc(cop0, regs->cp0reg[MIPS_CP0_EXC_PC][0]); - - kvm_write_c0_guest_status(cop0, regs->cp0reg[MIPS_CP0_STATUS][0]); - kvm_write_c0_guest_cause(cop0, regs->cp0reg[MIPS_CP0_CAUSE][0]); - kvm_write_c0_guest_pagemask(cop0, - regs->cp0reg[MIPS_CP0_TLB_PG_MASK][0]); - kvm_write_c0_guest_wired(cop0, regs->cp0reg[MIPS_CP0_TLB_WIRED][0]); - kvm_write_c0_guest_errorepc(cop0, regs->cp0reg[MIPS_CP0_ERROR_PC][0]); - - return 0; -} - -static int -kvm_trap_emul_ioctl_get_regs(struct kvm_vcpu *vcpu, struct kvm_regs *regs) -{ - struct mips_coproc *cop0 = vcpu->arch.cop0; - - regs->cp0reg[MIPS_CP0_TLB_INDEX][0] = kvm_read_c0_guest_index(cop0); - regs->cp0reg[MIPS_CP0_TLB_CONTEXT][0] = kvm_read_c0_guest_context(cop0); - regs->cp0reg[MIPS_CP0_BAD_VADDR][0] = kvm_read_c0_guest_badvaddr(cop0); - regs->cp0reg[MIPS_CP0_TLB_HI][0] = kvm_read_c0_guest_entryhi(cop0); - regs->cp0reg[MIPS_CP0_EXC_PC][0] = kvm_read_c0_guest_epc(cop0); - - regs->cp0reg[MIPS_CP0_STATUS][0] = kvm_read_c0_guest_status(cop0); - regs->cp0reg[MIPS_CP0_CAUSE][0] = kvm_read_c0_guest_cause(cop0); - regs->cp0reg[MIPS_CP0_TLB_PG_MASK][0] = - kvm_read_c0_guest_pagemask(cop0); - regs->cp0reg[MIPS_CP0_TLB_WIRED][0] = kvm_read_c0_guest_wired(cop0); - regs->cp0reg[MIPS_CP0_ERROR_PC][0] = kvm_read_c0_guest_errorepc(cop0); - - regs->cp0reg[MIPS_CP0_CONFIG][0] = kvm_read_c0_guest_config(cop0); - regs->cp0reg[MIPS_CP0_CONFIG][1] = kvm_read_c0_guest_config1(cop0); - regs->cp0reg[MIPS_CP0_CONFIG][2] = kvm_read_c0_guest_config2(cop0); - regs->cp0reg[MIPS_CP0_CONFIG][3] = kvm_read_c0_guest_config3(cop0); - regs->cp0reg[MIPS_CP0_CONFIG][7] = kvm_read_c0_guest_config7(cop0); - - return 0; -} - static int kvm_trap_emul_vm_init(struct kvm *kvm) { return 0; @@ -471,8 +423,6 @@ static struct kvm_mips_callbacks kvm_trap_emul_callbacks = { .dequeue_io_int = kvm_mips_dequeue_io_int_cb, .irq_deliver = kvm_mips_irq_deliver_cb, .irq_clear = kvm_mips_irq_clear_cb, - .vcpu_ioctl_get_regs = kvm_trap_emul_ioctl_get_regs, - .vcpu_ioctl_set_regs = kvm_trap_emul_ioctl_set_regs, }; int kvm_mips_emulation_init(struct kvm_mips_callbacks **install_callbacks) -- cgit v1.2.3 From ed829857b36bc0155d85b661ab227df57ac898f3 Mon Sep 17 00:00:00 2001 From: David Daney Date: Thu, 23 May 2013 09:49:10 -0700 Subject: mips/kvm: Use ENOIOCTLCMD to indicate unimplemented ioctls. The Linux Way is to return -ENOIOCTLCMD to the vfs when an unimplemented ioctl is requested. Do this in kvm_mips instead of a random mixture of -ENOTSUPP and -EINVAL. Signed-off-by: David Daney Acked-by: Sanjay Lal Signed-off-by: Paolo Bonzini --- arch/mips/kvm/kvm_mips.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) diff --git a/arch/mips/kvm/kvm_mips.c b/arch/mips/kvm/kvm_mips.c index 3caa0062ac1f..d934b017f479 100644 --- a/arch/mips/kvm/kvm_mips.c +++ b/arch/mips/kvm/kvm_mips.c @@ -195,7 +195,7 @@ void kvm_arch_destroy_vm(struct kvm *kvm) long kvm_arch_dev_ioctl(struct file *filp, unsigned int ioctl, unsigned long arg) { - return -EINVAL; + return -ENOIOCTLCMD; } void kvm_arch_free_memslot(struct kvm_memory_slot *free, @@ -401,7 +401,7 @@ int kvm_arch_vcpu_ioctl_set_guest_debug(struct kvm_vcpu *vcpu, struct kvm_guest_debug *dbg) { - return -EINVAL; + return -ENOIOCTLCMD; } int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *run) @@ -475,14 +475,14 @@ int kvm_arch_vcpu_ioctl_get_mpstate(struct kvm_vcpu *vcpu, struct kvm_mp_state *mp_state) { - return -EINVAL; + return -ENOIOCTLCMD; } int kvm_arch_vcpu_ioctl_set_mpstate(struct kvm_vcpu *vcpu, struct kvm_mp_state *mp_state) { - return -EINVAL; + return -ENOIOCTLCMD; } #define KVM_REG_MIPS_CP0_INDEX (0x10000 + 8 * 0 + 0) @@ -801,7 +801,7 @@ long kvm_arch_vm_ioctl(struct file *filp, unsigned int ioctl, unsigned long arg) switch (ioctl) { default: - r = -EINVAL; + r = -ENOIOCTLCMD; } return r; @@ -829,13 +829,13 @@ void kvm_arch_exit(void) int kvm_arch_vcpu_ioctl_get_sregs(struct kvm_vcpu *vcpu, struct kvm_sregs *sregs) { - return -ENOTSUPP; + return -ENOIOCTLCMD; } int kvm_arch_vcpu_ioctl_set_sregs(struct kvm_vcpu *vcpu, struct kvm_sregs *sregs) { - return -ENOTSUPP; + return -ENOIOCTLCMD; } int kvm_arch_vcpu_postcreate(struct kvm_vcpu *vcpu) @@ -845,12 +845,12 @@ int kvm_arch_vcpu_postcreate(struct kvm_vcpu *vcpu) int kvm_arch_vcpu_ioctl_get_fpu(struct kvm_vcpu *vcpu, struct kvm_fpu *fpu) { - return -ENOTSUPP; + return -ENOIOCTLCMD; } int kvm_arch_vcpu_ioctl_set_fpu(struct kvm_vcpu *vcpu, struct kvm_fpu *fpu) { - return -ENOTSUPP; + return -ENOIOCTLCMD; } int kvm_arch_vcpu_fault(struct kvm_vcpu *vcpu, struct vm_fault *vmf) -- cgit v1.2.3 From e8180dcaa8470ceca21109f143876fdcd9fe050a Mon Sep 17 00:00:00 2001 From: Andre Przywara Date: Thu, 9 May 2013 00:28:06 +0200 Subject: ARM: KVM: prevent NULL pointer dereferences with KVM VCPU ioctl Some ARM KVM VCPU ioctls require the vCPU to be properly initialized with the KVM_ARM_VCPU_INIT ioctl before being used with further requests. KVM_RUN checks whether this initialization has been done, but other ioctls do not. Namely KVM_GET_REG_LIST will dereference an array with index -1 without initialization and thus leads to a kernel oops. Fix this by adding checks before executing the ioctl handlers. [ Removed superflous comment from static function - Christoffer ] Changes from v1: * moved check into a static function with a meaningful name Signed-off-by: Andre Przywara Signed-off-by: Christoffer Dall --- arch/arm/kvm/arm.c | 15 +++++++++++++-- 1 file changed, 13 insertions(+), 2 deletions(-) diff --git a/arch/arm/kvm/arm.c b/arch/arm/kvm/arm.c index 37d216d814cd..ef1703b9587b 100644 --- a/arch/arm/kvm/arm.c +++ b/arch/arm/kvm/arm.c @@ -492,6 +492,11 @@ static void vcpu_pause(struct kvm_vcpu *vcpu) wait_event_interruptible(*wq, !vcpu->arch.pause); } +static int kvm_vcpu_initialized(struct kvm_vcpu *vcpu) +{ + return vcpu->arch.target >= 0; +} + /** * kvm_arch_vcpu_ioctl_run - the main VCPU run function to execute guest code * @vcpu: The VCPU pointer @@ -508,8 +513,7 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *run) int ret; sigset_t sigsaved; - /* Make sure they initialize the vcpu with KVM_ARM_VCPU_INIT */ - if (unlikely(vcpu->arch.target < 0)) + if (unlikely(!kvm_vcpu_initialized(vcpu))) return -ENOEXEC; ret = kvm_vcpu_first_run_init(vcpu); @@ -710,6 +714,10 @@ long kvm_arch_vcpu_ioctl(struct file *filp, case KVM_SET_ONE_REG: case KVM_GET_ONE_REG: { struct kvm_one_reg reg; + + if (unlikely(!kvm_vcpu_initialized(vcpu))) + return -ENOEXEC; + if (copy_from_user(®, argp, sizeof(reg))) return -EFAULT; if (ioctl == KVM_SET_ONE_REG) @@ -722,6 +730,9 @@ long kvm_arch_vcpu_ioctl(struct file *filp, struct kvm_reg_list reg_list; unsigned n; + if (unlikely(!kvm_vcpu_initialized(vcpu))) + return -ENOEXEC; + if (copy_from_user(®_list, user_list, sizeof(reg_list))) return -EFAULT; n = reg_list.n; -- cgit v1.2.3 From d4cb9df5d1f79950b34e78ec5d1b1b59d6e9c7b7 Mon Sep 17 00:00:00 2001 From: Marc Zyngier Date: Tue, 14 May 2013 12:11:34 +0100 Subject: ARM: KVM: be more thorough when invalidating TLBs The KVM/ARM MMU code doesn't take care of invalidating TLBs before freeing a {pte,pmd} table. This could cause problems if the page is reallocated and then speculated into by another CPU. Reported-by: Catalin Marinas Signed-off-by: Marc Zyngier Acked-by: Catalin Marinas Signed-off-by: Christoffer Dall --- arch/arm/kvm/mmu.c | 41 ++++++++++++++++++++++++++--------------- 1 file changed, 26 insertions(+), 15 deletions(-) diff --git a/arch/arm/kvm/mmu.c b/arch/arm/kvm/mmu.c index 965706578f13..84ba67b982c0 100644 --- a/arch/arm/kvm/mmu.c +++ b/arch/arm/kvm/mmu.c @@ -43,7 +43,14 @@ static phys_addr_t hyp_idmap_vector; static void kvm_tlb_flush_vmid_ipa(struct kvm *kvm, phys_addr_t ipa) { - kvm_call_hyp(__kvm_tlb_flush_vmid_ipa, kvm, ipa); + /* + * This function also gets called when dealing with HYP page + * tables. As HYP doesn't have an associated struct kvm (and + * the HYP page tables are fairly static), we don't do + * anything there. + */ + if (kvm) + kvm_call_hyp(__kvm_tlb_flush_vmid_ipa, kvm, ipa); } static int mmu_topup_memory_cache(struct kvm_mmu_memory_cache *cache, @@ -78,18 +85,20 @@ static void *mmu_memory_cache_alloc(struct kvm_mmu_memory_cache *mc) return p; } -static void clear_pud_entry(pud_t *pud) +static void clear_pud_entry(struct kvm *kvm, pud_t *pud, phys_addr_t addr) { pmd_t *pmd_table = pmd_offset(pud, 0); pud_clear(pud); + kvm_tlb_flush_vmid_ipa(kvm, addr); pmd_free(NULL, pmd_table); put_page(virt_to_page(pud)); } -static void clear_pmd_entry(pmd_t *pmd) +static void clear_pmd_entry(struct kvm *kvm, pmd_t *pmd, phys_addr_t addr) { pte_t *pte_table = pte_offset_kernel(pmd, 0); pmd_clear(pmd); + kvm_tlb_flush_vmid_ipa(kvm, addr); pte_free_kernel(NULL, pte_table); put_page(virt_to_page(pmd)); } @@ -100,11 +109,12 @@ static bool pmd_empty(pmd_t *pmd) return page_count(pmd_page) == 1; } -static void clear_pte_entry(pte_t *pte) +static void clear_pte_entry(struct kvm *kvm, pte_t *pte, phys_addr_t addr) { if (pte_present(*pte)) { kvm_set_pte(pte, __pte(0)); put_page(virt_to_page(pte)); + kvm_tlb_flush_vmid_ipa(kvm, addr); } } @@ -114,7 +124,8 @@ static bool pte_empty(pte_t *pte) return page_count(pte_page) == 1; } -static void unmap_range(pgd_t *pgdp, unsigned long long start, u64 size) +static void unmap_range(struct kvm *kvm, pgd_t *pgdp, + unsigned long long start, u64 size) { pgd_t *pgd; pud_t *pud; @@ -138,15 +149,15 @@ static void unmap_range(pgd_t *pgdp, unsigned long long start, u64 size) } pte = pte_offset_kernel(pmd, addr); - clear_pte_entry(pte); + clear_pte_entry(kvm, pte, addr); range = PAGE_SIZE; /* If we emptied the pte, walk back up the ladder */ if (pte_empty(pte)) { - clear_pmd_entry(pmd); + clear_pmd_entry(kvm, pmd, addr); range = PMD_SIZE; if (pmd_empty(pmd)) { - clear_pud_entry(pud); + clear_pud_entry(kvm, pud, addr); range = PUD_SIZE; } } @@ -165,14 +176,14 @@ void free_boot_hyp_pgd(void) mutex_lock(&kvm_hyp_pgd_mutex); if (boot_hyp_pgd) { - unmap_range(boot_hyp_pgd, hyp_idmap_start, PAGE_SIZE); - unmap_range(boot_hyp_pgd, TRAMPOLINE_VA, PAGE_SIZE); + unmap_range(NULL, boot_hyp_pgd, hyp_idmap_start, PAGE_SIZE); + unmap_range(NULL, boot_hyp_pgd, TRAMPOLINE_VA, PAGE_SIZE); kfree(boot_hyp_pgd); boot_hyp_pgd = NULL; } if (hyp_pgd) - unmap_range(hyp_pgd, TRAMPOLINE_VA, PAGE_SIZE); + unmap_range(NULL, hyp_pgd, TRAMPOLINE_VA, PAGE_SIZE); kfree(init_bounce_page); init_bounce_page = NULL; @@ -200,9 +211,10 @@ void free_hyp_pgds(void) if (hyp_pgd) { for (addr = PAGE_OFFSET; virt_addr_valid(addr); addr += PGDIR_SIZE) - unmap_range(hyp_pgd, KERN_TO_HYP(addr), PGDIR_SIZE); + unmap_range(NULL, hyp_pgd, KERN_TO_HYP(addr), PGDIR_SIZE); for (addr = VMALLOC_START; is_vmalloc_addr((void*)addr); addr += PGDIR_SIZE) - unmap_range(hyp_pgd, KERN_TO_HYP(addr), PGDIR_SIZE); + unmap_range(NULL, hyp_pgd, KERN_TO_HYP(addr), PGDIR_SIZE); + kfree(hyp_pgd); hyp_pgd = NULL; } @@ -393,7 +405,7 @@ int kvm_alloc_stage2_pgd(struct kvm *kvm) */ static void unmap_stage2_range(struct kvm *kvm, phys_addr_t start, u64 size) { - unmap_range(kvm->arch.pgd, start, size); + unmap_range(kvm, kvm->arch.pgd, start, size); } /** @@ -675,7 +687,6 @@ static void handle_hva_to_gpa(struct kvm *kvm, static void kvm_unmap_hva_handler(struct kvm *kvm, gpa_t gpa, void *data) { unmap_stage2_range(kvm, gpa, PAGE_SIZE); - kvm_tlb_flush_vmid_ipa(kvm, gpa); } int kvm_unmap_hva(struct kvm *kvm, unsigned long hva) -- cgit v1.2.3 From 103f98ea64a1b0a67d8a1b23070b4db3533db2b8 Mon Sep 17 00:00:00 2001 From: Paolo Bonzini Date: Thu, 30 May 2013 13:22:39 +0200 Subject: KVM: Emulate multibyte NOP This is encountered when booting RHEL5.9 64-bit. There is another bug after this one that is not a simple emulation failure, but this one lets the boot proceed a bit. Cc: # 3.9 Signed-off-by: Paolo Bonzini Signed-off-by: Gleb Natapov --- arch/x86/kvm/emulate.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/arch/x86/kvm/emulate.c b/arch/x86/kvm/emulate.c index 8db0010ed150..0f42c2a48166 100644 --- a/arch/x86/kvm/emulate.c +++ b/arch/x86/kvm/emulate.c @@ -3997,7 +3997,8 @@ static const struct opcode twobyte_table[256] = { DI(ImplicitOps | Priv, invd), DI(ImplicitOps | Priv, wbinvd), N, N, N, D(ImplicitOps | ModRM), N, N, /* 0x10 - 0x1F */ - N, N, N, N, N, N, N, N, D(ImplicitOps | ModRM), N, N, N, N, N, N, N, + N, N, N, N, N, N, N, N, + D(ImplicitOps | ModRM), N, N, N, N, N, N, D(ImplicitOps | ModRM), /* 0x20 - 0x2F */ DIP(ModRM | DstMem | Priv | Op3264, cr_read, check_cr_read), DIP(ModRM | DstMem | Priv | Op3264, dr_read, check_dr_read), @@ -4836,6 +4837,7 @@ twobyte_insn: case 0x08: /* invd */ case 0x0d: /* GrpP (prefetch) */ case 0x18: /* Grp16 (prefetch/nop) */ + case 0x1f: /* nop */ break; case 0x20: /* mov cr, reg */ ctxt->dst.val = ops->get_cr(ctxt, ctxt->modrm_reg); -- cgit v1.2.3 From 8acb42070ec4c87a9baab5c7bac626030d5bef28 Mon Sep 17 00:00:00 2001 From: Paolo Bonzini Date: Thu, 30 May 2013 16:35:55 +0200 Subject: KVM: fix sil/dil/bpl/spl in the mod/rm fields The x86-64 extended low-byte registers were fetched correctly from reg, but not from mod/rm. This fixes another bug in the boot of RHEL5.9 64-bit, but it is still not enough. Cc: # 3.9 Signed-off-by: Paolo Bonzini Signed-off-by: Gleb Natapov --- arch/x86/kvm/emulate.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/arch/x86/kvm/emulate.c b/arch/x86/kvm/emulate.c index 0f42c2a48166..5953dcea752d 100644 --- a/arch/x86/kvm/emulate.c +++ b/arch/x86/kvm/emulate.c @@ -1240,9 +1240,12 @@ static int decode_modrm(struct x86_emulate_ctxt *ctxt, ctxt->modrm_seg = VCPU_SREG_DS; if (ctxt->modrm_mod == 3) { + int highbyte_regs = ctxt->rex_prefix == 0; + op->type = OP_REG; op->bytes = (ctxt->d & ByteOp) ? 1 : ctxt->op_bytes; - op->addr.reg = decode_register(ctxt, ctxt->modrm_rm, ctxt->d & ByteOp); + op->addr.reg = decode_register(ctxt, ctxt->modrm_rm, + highbyte_regs && (ctxt->d & ByteOp)); if (ctxt->d & Sse) { op->type = OP_XMM; op->bytes = 16; -- cgit v1.2.3 From 299018f44ac553dce3caf84df1d14c4764faa279 Mon Sep 17 00:00:00 2001 From: Gleb Natapov Date: Mon, 3 Jun 2013 11:30:02 +0300 Subject: KVM: Fix race in apic->pending_events processing apic->pending_events processing has a race that may cause INIT and SIPI processing to be reordered: vpu0: vcpu1: set INIT test_and_clear_bit(KVM_APIC_INIT) process INIT set INIT set SIPI test_and_clear_bit(KVM_APIC_SIPI) process SIPI At the end INIT is left pending in pending_events. The following patch fixes this by latching pending event before processing them. Signed-off-by: Gleb Natapov --- arch/x86/kvm/lapic.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/arch/x86/kvm/lapic.c b/arch/x86/kvm/lapic.c index e1adbb4aca75..0eee2c8b64d1 100644 --- a/arch/x86/kvm/lapic.c +++ b/arch/x86/kvm/lapic.c @@ -1861,11 +1861,14 @@ void kvm_apic_accept_events(struct kvm_vcpu *vcpu) { struct kvm_lapic *apic = vcpu->arch.apic; unsigned int sipi_vector; + unsigned long pe; - if (!kvm_vcpu_has_lapic(vcpu)) + if (!kvm_vcpu_has_lapic(vcpu) || !apic->pending_events) return; - if (test_and_clear_bit(KVM_APIC_INIT, &apic->pending_events)) { + pe = xchg(&apic->pending_events, 0); + + if (test_bit(KVM_APIC_INIT, &pe)) { kvm_lapic_reset(vcpu); kvm_vcpu_reset(vcpu); if (kvm_vcpu_is_bsp(apic->vcpu)) @@ -1873,7 +1876,7 @@ void kvm_apic_accept_events(struct kvm_vcpu *vcpu) else vcpu->arch.mp_state = KVM_MP_STATE_INIT_RECEIVED; } - if (test_and_clear_bit(KVM_APIC_SIPI, &apic->pending_events) && + if (test_bit(KVM_APIC_SIPI, &pe) && vcpu->arch.mp_state == KVM_MP_STATE_INIT_RECEIVED) { /* evaluate pending_events before reading the vector */ smp_rmb(); -- cgit v1.2.3 From 8706a6b6303dd75c7ee2baf2161de0f5a2fbdd8b Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Thu, 30 May 2013 15:10:52 +0200 Subject: microblaze: Fix sparse warnings arch/microblaze/include/asm/uaccess.h:101:3: warning: cast removes address space of expression arch/microblaze/include/asm/uaccess.h:107:2: warning: cast removes address space of expression Signed-off-by: Michal Simek --- arch/microblaze/include/asm/uaccess.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/microblaze/include/asm/uaccess.h b/arch/microblaze/include/asm/uaccess.h index efe59d881789..04e49553bdf9 100644 --- a/arch/microblaze/include/asm/uaccess.h +++ b/arch/microblaze/include/asm/uaccess.h @@ -99,13 +99,13 @@ static inline int access_ok(int type, const void __user *addr, if ((get_fs().seg < ((unsigned long)addr)) || (get_fs().seg < ((unsigned long)addr + size - 1))) { pr_debug("ACCESS fail: %s at 0x%08x (size 0x%x), seg 0x%08x\n", - type ? "WRITE" : "READ ", (u32)addr, (u32)size, + type ? "WRITE" : "READ ", (__force u32)addr, (u32)size, (u32)get_fs().seg); return 0; } ok: pr_debug("ACCESS OK: %s at 0x%08x (size 0x%x), seg 0x%08x\n", - type ? "WRITE" : "READ ", (u32)addr, (u32)size, + type ? "WRITE" : "READ ", (__force u32)addr, (u32)size, (u32)get_fs().seg); return 1; } -- cgit v1.2.3 From 62bc82a82bb1e2b5ee5048c088af7260ddb2b7b5 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Mon, 3 Jun 2013 11:30:04 +0200 Subject: microblaze: Use static inline functions in cacheflush.h Using static inline functions ensure proper type checking which also remove compilation warning for no MMU Compilation warning: arch/microblaze/include/asm/cacheflush.h: warning: 'addr' may be used uninitialized in this function [-Wmaybe-uninitialized] Signed-off-by: Michal Simek --- arch/microblaze/include/asm/cacheflush.h | 34 +++++++++++++++++--------------- 1 file changed, 18 insertions(+), 16 deletions(-) diff --git a/arch/microblaze/include/asm/cacheflush.h b/arch/microblaze/include/asm/cacheflush.h index 0f553bc009a0..ffea82a16d2c 100644 --- a/arch/microblaze/include/asm/cacheflush.h +++ b/arch/microblaze/include/asm/cacheflush.h @@ -102,21 +102,23 @@ do { \ #define flush_cache_range(vma, start, len) do { } while (0) -#define copy_to_user_page(vma, page, vaddr, dst, src, len) \ -do { \ - u32 addr = virt_to_phys(dst); \ - memcpy((dst), (src), (len)); \ - if (vma->vm_flags & VM_EXEC) { \ - invalidate_icache_range((unsigned) (addr), \ - (unsigned) (addr) + PAGE_SIZE); \ - flush_dcache_range((unsigned) (addr), \ - (unsigned) (addr) + PAGE_SIZE); \ - } \ -} while (0) - -#define copy_from_user_page(vma, page, vaddr, dst, src, len) \ -do { \ - memcpy((dst), (src), (len)); \ -} while (0) +static inline void copy_to_user_page(struct vm_area_struct *vma, + struct page *page, unsigned long vaddr, + void *dst, void *src, int len) +{ + u32 addr = virt_to_phys(dst); + memcpy(dst, src, len); + if (vma->vm_flags & VM_EXEC) { + invalidate_icache_range(addr, addr + PAGE_SIZE); + flush_dcache_range(addr, addr + PAGE_SIZE); + } +} + +static inline void copy_from_user_page(struct vm_area_struct *vma, + struct page *page, unsigned long vaddr, + void *dst, void *src, int len) +{ + memcpy(dst, src, len); +} #endif /* _ASM_MICROBLAZE_CACHEFLUSH_H */ -- cgit v1.2.3 From a90f13b24fb40d02d11496cce6a10ae8d4b319b2 Mon Sep 17 00:00:00 2001 From: Jonas Peterson Date: Tue, 7 May 2013 22:05:23 +0200 Subject: net: can: kvaser_usb: fix reception on "USBcan Pro" and "USBcan R" type hardware. Unlike Kvaser Leaf light devices, some other Kvaser devices (like USBcan Pro, USBcan R) receive CAN messages in CMD_LOG_MESSAGE frames. This patch adds support for it. Cc: linux-stable # >= v3.8 Signed-off-by: Jonas Peterson Signed-off-by: Olivier Sobrie Signed-off-by: Marc Kleine-Budde --- drivers/net/can/usb/kvaser_usb.c | 64 +++++++++++++++++++++++++++------------- 1 file changed, 43 insertions(+), 21 deletions(-) diff --git a/drivers/net/can/usb/kvaser_usb.c b/drivers/net/can/usb/kvaser_usb.c index 45cb9f3c1324..3b9546588240 100644 --- a/drivers/net/can/usb/kvaser_usb.c +++ b/drivers/net/can/usb/kvaser_usb.c @@ -136,6 +136,9 @@ #define KVASER_CTRL_MODE_SELFRECEPTION 3 #define KVASER_CTRL_MODE_OFF 4 +/* log message */ +#define KVASER_EXTENDED_FRAME BIT(31) + struct kvaser_msg_simple { u8 tid; u8 channel; @@ -817,8 +820,13 @@ static void kvaser_usb_rx_can_msg(const struct kvaser_usb *dev, priv = dev->nets[channel]; stats = &priv->netdev->stats; - if (msg->u.rx_can.flag & (MSG_FLAG_ERROR_FRAME | MSG_FLAG_NERR | - MSG_FLAG_OVERRUN)) { + if ((msg->u.rx_can.flag & MSG_FLAG_ERROR_FRAME) && + (msg->id == CMD_LOG_MESSAGE)) { + kvaser_usb_rx_error(dev, msg); + return; + } else if (msg->u.rx_can.flag & (MSG_FLAG_ERROR_FRAME | + MSG_FLAG_NERR | + MSG_FLAG_OVERRUN)) { kvaser_usb_rx_can_err(priv, msg); return; } else if (msg->u.rx_can.flag & ~MSG_FLAG_REMOTE_FRAME) { @@ -834,22 +842,40 @@ static void kvaser_usb_rx_can_msg(const struct kvaser_usb *dev, return; } - cf->can_id = ((msg->u.rx_can.msg[0] & 0x1f) << 6) | - (msg->u.rx_can.msg[1] & 0x3f); - cf->can_dlc = get_can_dlc(msg->u.rx_can.msg[5]); + if (msg->id == CMD_LOG_MESSAGE) { + cf->can_id = le32_to_cpu(msg->u.log_message.id); + if (cf->can_id & KVASER_EXTENDED_FRAME) + cf->can_id &= CAN_EFF_MASK | CAN_EFF_FLAG; + else + cf->can_id &= CAN_SFF_MASK; - if (msg->id == CMD_RX_EXT_MESSAGE) { - cf->can_id <<= 18; - cf->can_id |= ((msg->u.rx_can.msg[2] & 0x0f) << 14) | - ((msg->u.rx_can.msg[3] & 0xff) << 6) | - (msg->u.rx_can.msg[4] & 0x3f); - cf->can_id |= CAN_EFF_FLAG; - } + cf->can_dlc = get_can_dlc(msg->u.log_message.dlc); - if (msg->u.rx_can.flag & MSG_FLAG_REMOTE_FRAME) - cf->can_id |= CAN_RTR_FLAG; - else - memcpy(cf->data, &msg->u.rx_can.msg[6], cf->can_dlc); + if (msg->u.log_message.flags & MSG_FLAG_REMOTE_FRAME) + cf->can_id |= CAN_RTR_FLAG; + else + memcpy(cf->data, &msg->u.log_message.data, + cf->can_dlc); + } else { + cf->can_id = ((msg->u.rx_can.msg[0] & 0x1f) << 6) | + (msg->u.rx_can.msg[1] & 0x3f); + + if (msg->id == CMD_RX_EXT_MESSAGE) { + cf->can_id <<= 18; + cf->can_id |= ((msg->u.rx_can.msg[2] & 0x0f) << 14) | + ((msg->u.rx_can.msg[3] & 0xff) << 6) | + (msg->u.rx_can.msg[4] & 0x3f); + cf->can_id |= CAN_EFF_FLAG; + } + + cf->can_dlc = get_can_dlc(msg->u.rx_can.msg[5]); + + if (msg->u.rx_can.flag & MSG_FLAG_REMOTE_FRAME) + cf->can_id |= CAN_RTR_FLAG; + else + memcpy(cf->data, &msg->u.rx_can.msg[6], + cf->can_dlc); + } netif_rx(skb); @@ -911,6 +937,7 @@ static void kvaser_usb_handle_message(const struct kvaser_usb *dev, case CMD_RX_STD_MESSAGE: case CMD_RX_EXT_MESSAGE: + case CMD_LOG_MESSAGE: kvaser_usb_rx_can_msg(dev, msg); break; @@ -919,11 +946,6 @@ static void kvaser_usb_handle_message(const struct kvaser_usb *dev, kvaser_usb_rx_error(dev, msg); break; - case CMD_LOG_MESSAGE: - if (msg->u.log_message.flags & MSG_FLAG_ERROR_FRAME) - kvaser_usb_rx_error(dev, msg); - break; - case CMD_TX_ACKNOWLEDGE: kvaser_usb_tx_acknowledge(dev, msg); break; -- cgit v1.2.3 From fae37f81fdf3680c5d70abdc57e7b83f4b6c266a Mon Sep 17 00:00:00 2001 From: Olivier Sobrie Date: Fri, 18 Jan 2013 09:14:04 +0100 Subject: net: can: esd_usb2: Do not do dma on the stack smatch reports the following warnings: drivers/net/can/usb/esd_usb2.c:640 esd_usb2_start() error: doing dma on the stack (&msg) drivers/net/can/usb/esd_usb2.c:846 esd_usb2_close() error: doing dma on the stack (&msg) drivers/net/can/usb/esd_usb2.c:855 esd_usb2_close() error: doing dma on the stack (&msg) drivers/net/can/usb/esd_usb2.c:923 esd_usb2_set_bittiming() error: doing dma on the stack (&msg) drivers/net/can/usb/esd_usb2.c:1047 esd_usb2_probe() error: doing dma on the stack (&msg) drivers/net/can/usb/esd_usb2.c:1053 esd_usb2_probe() error: doing dma on the stack (&msg) See "Documentation/DMA-API-HOWTO.txt" section "What memory is DMA'able?" Signed-off-by: Olivier Sobrie Cc: Matthias Fuchs Signed-off-by: Marc Kleine-Budde --- drivers/net/can/usb/esd_usb2.c | 127 ++++++++++++++++++++++++----------------- 1 file changed, 76 insertions(+), 51 deletions(-) diff --git a/drivers/net/can/usb/esd_usb2.c b/drivers/net/can/usb/esd_usb2.c index 9b74d1e3ad44..6aa7b3266c80 100644 --- a/drivers/net/can/usb/esd_usb2.c +++ b/drivers/net/can/usb/esd_usb2.c @@ -612,9 +612,15 @@ static int esd_usb2_start(struct esd_usb2_net_priv *priv) { struct esd_usb2 *dev = priv->usb2; struct net_device *netdev = priv->netdev; - struct esd_usb2_msg msg; + struct esd_usb2_msg *msg; int err, i; + msg = kmalloc(sizeof(*msg), GFP_KERNEL); + if (!msg) { + err = -ENOMEM; + goto out; + } + /* * Enable all IDs * The IDADD message takes up to 64 32 bit bitmasks (2048 bits). @@ -628,33 +634,32 @@ static int esd_usb2_start(struct esd_usb2_net_priv *priv) * the number of the starting bitmask (0..64) to the filter.option * field followed by only some bitmasks. */ - msg.msg.hdr.cmd = CMD_IDADD; - msg.msg.hdr.len = 2 + ESD_MAX_ID_SEGMENT; - msg.msg.filter.net = priv->index; - msg.msg.filter.option = ESD_ID_ENABLE; /* start with segment 0 */ + msg->msg.hdr.cmd = CMD_IDADD; + msg->msg.hdr.len = 2 + ESD_MAX_ID_SEGMENT; + msg->msg.filter.net = priv->index; + msg->msg.filter.option = ESD_ID_ENABLE; /* start with segment 0 */ for (i = 0; i < ESD_MAX_ID_SEGMENT; i++) - msg.msg.filter.mask[i] = cpu_to_le32(0xffffffff); + msg->msg.filter.mask[i] = cpu_to_le32(0xffffffff); /* enable 29bit extended IDs */ - msg.msg.filter.mask[ESD_MAX_ID_SEGMENT] = cpu_to_le32(0x00000001); + msg->msg.filter.mask[ESD_MAX_ID_SEGMENT] = cpu_to_le32(0x00000001); - err = esd_usb2_send_msg(dev, &msg); + err = esd_usb2_send_msg(dev, msg); if (err) - goto failed; + goto out; err = esd_usb2_setup_rx_urbs(dev); if (err) - goto failed; + goto out; priv->can.state = CAN_STATE_ERROR_ACTIVE; - return 0; - -failed: +out: if (err == -ENODEV) netif_device_detach(netdev); + if (err) + netdev_err(netdev, "couldn't start device: %d\n", err); - netdev_err(netdev, "couldn't start device: %d\n", err); - + kfree(msg); return err; } @@ -833,26 +838,30 @@ nourbmem: static int esd_usb2_close(struct net_device *netdev) { struct esd_usb2_net_priv *priv = netdev_priv(netdev); - struct esd_usb2_msg msg; + struct esd_usb2_msg *msg; int i; + msg = kmalloc(sizeof(*msg), GFP_KERNEL); + if (!msg) + return -ENOMEM; + /* Disable all IDs (see esd_usb2_start()) */ - msg.msg.hdr.cmd = CMD_IDADD; - msg.msg.hdr.len = 2 + ESD_MAX_ID_SEGMENT; - msg.msg.filter.net = priv->index; - msg.msg.filter.option = ESD_ID_ENABLE; /* start with segment 0 */ + msg->msg.hdr.cmd = CMD_IDADD; + msg->msg.hdr.len = 2 + ESD_MAX_ID_SEGMENT; + msg->msg.filter.net = priv->index; + msg->msg.filter.option = ESD_ID_ENABLE; /* start with segment 0 */ for (i = 0; i <= ESD_MAX_ID_SEGMENT; i++) - msg.msg.filter.mask[i] = 0; - if (esd_usb2_send_msg(priv->usb2, &msg) < 0) + msg->msg.filter.mask[i] = 0; + if (esd_usb2_send_msg(priv->usb2, msg) < 0) netdev_err(netdev, "sending idadd message failed\n"); /* set CAN controller to reset mode */ - msg.msg.hdr.len = 2; - msg.msg.hdr.cmd = CMD_SETBAUD; - msg.msg.setbaud.net = priv->index; - msg.msg.setbaud.rsvd = 0; - msg.msg.setbaud.baud = cpu_to_le32(ESD_USB2_NO_BAUDRATE); - if (esd_usb2_send_msg(priv->usb2, &msg) < 0) + msg->msg.hdr.len = 2; + msg->msg.hdr.cmd = CMD_SETBAUD; + msg->msg.setbaud.net = priv->index; + msg->msg.setbaud.rsvd = 0; + msg->msg.setbaud.baud = cpu_to_le32(ESD_USB2_NO_BAUDRATE); + if (esd_usb2_send_msg(priv->usb2, msg) < 0) netdev_err(netdev, "sending setbaud message failed\n"); priv->can.state = CAN_STATE_STOPPED; @@ -861,6 +870,8 @@ static int esd_usb2_close(struct net_device *netdev) close_candev(netdev); + kfree(msg); + return 0; } @@ -886,7 +897,8 @@ static int esd_usb2_set_bittiming(struct net_device *netdev) { struct esd_usb2_net_priv *priv = netdev_priv(netdev); struct can_bittiming *bt = &priv->can.bittiming; - struct esd_usb2_msg msg; + struct esd_usb2_msg *msg; + int err; u32 canbtr; int sjw_shift; @@ -912,15 +924,22 @@ static int esd_usb2_set_bittiming(struct net_device *netdev) if (priv->can.ctrlmode & CAN_CTRLMODE_3_SAMPLES) canbtr |= ESD_USB2_3_SAMPLES; - msg.msg.hdr.len = 2; - msg.msg.hdr.cmd = CMD_SETBAUD; - msg.msg.setbaud.net = priv->index; - msg.msg.setbaud.rsvd = 0; - msg.msg.setbaud.baud = cpu_to_le32(canbtr); + msg = kmalloc(sizeof(*msg), GFP_KERNEL); + if (!msg) + return -ENOMEM; + + msg->msg.hdr.len = 2; + msg->msg.hdr.cmd = CMD_SETBAUD; + msg->msg.setbaud.net = priv->index; + msg->msg.setbaud.rsvd = 0; + msg->msg.setbaud.baud = cpu_to_le32(canbtr); netdev_info(netdev, "setting BTR=%#x\n", canbtr); - return esd_usb2_send_msg(priv->usb2, &msg); + err = esd_usb2_send_msg(priv->usb2, msg); + + kfree(msg); + return err; } static int esd_usb2_get_berr_counter(const struct net_device *netdev, @@ -1022,7 +1041,7 @@ static int esd_usb2_probe(struct usb_interface *intf, const struct usb_device_id *id) { struct esd_usb2 *dev; - struct esd_usb2_msg msg; + struct esd_usb2_msg *msg; int i, err; dev = kzalloc(sizeof(*dev), GFP_KERNEL); @@ -1037,27 +1056,33 @@ static int esd_usb2_probe(struct usb_interface *intf, usb_set_intfdata(intf, dev); + msg = kmalloc(sizeof(*msg), GFP_KERNEL); + if (!msg) { + err = -ENOMEM; + goto free_msg; + } + /* query number of CAN interfaces (nets) */ - msg.msg.hdr.cmd = CMD_VERSION; - msg.msg.hdr.len = 2; - msg.msg.version.rsvd = 0; - msg.msg.version.flags = 0; - msg.msg.version.drv_version = 0; + msg->msg.hdr.cmd = CMD_VERSION; + msg->msg.hdr.len = 2; + msg->msg.version.rsvd = 0; + msg->msg.version.flags = 0; + msg->msg.version.drv_version = 0; - err = esd_usb2_send_msg(dev, &msg); + err = esd_usb2_send_msg(dev, msg); if (err < 0) { dev_err(&intf->dev, "sending version message failed\n"); - goto free_dev; + goto free_msg; } - err = esd_usb2_wait_msg(dev, &msg); + err = esd_usb2_wait_msg(dev, msg); if (err < 0) { dev_err(&intf->dev, "no version message answer\n"); - goto free_dev; + goto free_msg; } - dev->net_count = (int)msg.msg.version_reply.nets; - dev->version = le32_to_cpu(msg.msg.version_reply.version); + dev->net_count = (int)msg->msg.version_reply.nets; + dev->version = le32_to_cpu(msg->msg.version_reply.version); if (device_create_file(&intf->dev, &dev_attr_firmware)) dev_err(&intf->dev, @@ -1075,10 +1100,10 @@ static int esd_usb2_probe(struct usb_interface *intf, for (i = 0; i < dev->net_count; i++) esd_usb2_probe_one_net(intf, i); - return 0; - -free_dev: - kfree(dev); +free_msg: + kfree(msg); + if (err) + kfree(dev); done: return err; } -- cgit v1.2.3 From f14e22435a27ef183bbfa78f77ad86644c0b354c Mon Sep 17 00:00:00 2001 From: Marc Kleine-Budde Date: Thu, 16 May 2013 11:36:40 +0200 Subject: net: can: peak_usb: Do not do dma on the stack smatch reports the following warnings: drivers/net/can/usb/peak_usb/pcan_usb_pro.c:514 pcan_usb_pro_drv_loaded() error: doing dma on the stack (buffer) drivers/net/can/usb/peak_usb/pcan_usb_pro.c:878 pcan_usb_pro_init() error: doing dma on the stack (&fi) drivers/net/can/usb/peak_usb/pcan_usb_pro.c:889 pcan_usb_pro_init() error: doing dma on the stack (&bi) See "Documentation/DMA-API-HOWTO.txt" section "What memory is DMA'able?" Cc: Stephane Grosjean Signed-off-by: Marc Kleine-Budde --- drivers/net/can/usb/peak_usb/pcan_usb_pro.c | 61 +++++++++++++++++++---------- drivers/net/can/usb/peak_usb/pcan_usb_pro.h | 1 + 2 files changed, 41 insertions(+), 21 deletions(-) diff --git a/drivers/net/can/usb/peak_usb/pcan_usb_pro.c b/drivers/net/can/usb/peak_usb/pcan_usb_pro.c index 30d79bfa5b10..8ee9d1556e6e 100644 --- a/drivers/net/can/usb/peak_usb/pcan_usb_pro.c +++ b/drivers/net/can/usb/peak_usb/pcan_usb_pro.c @@ -504,15 +504,24 @@ static int pcan_usb_pro_restart_async(struct peak_usb_device *dev, return usb_submit_urb(urb, GFP_ATOMIC); } -static void pcan_usb_pro_drv_loaded(struct peak_usb_device *dev, int loaded) +static int pcan_usb_pro_drv_loaded(struct peak_usb_device *dev, int loaded) { - u8 buffer[16]; + u8 *buffer; + int err; + + buffer = kmalloc(PCAN_USBPRO_FCT_DRVLD_REQ_LEN, GFP_KERNEL); + if (!buffer) + return -ENOMEM; buffer[0] = 0; buffer[1] = !!loaded; - pcan_usb_pro_send_req(dev, PCAN_USBPRO_REQ_FCT, - PCAN_USBPRO_FCT_DRVLD, buffer, sizeof(buffer)); + err = pcan_usb_pro_send_req(dev, PCAN_USBPRO_REQ_FCT, + PCAN_USBPRO_FCT_DRVLD, buffer, + PCAN_USBPRO_FCT_DRVLD_REQ_LEN); + kfree(buffer); + + return err; } static inline @@ -851,21 +860,24 @@ static int pcan_usb_pro_stop(struct peak_usb_device *dev) */ static int pcan_usb_pro_init(struct peak_usb_device *dev) { - struct pcan_usb_pro_interface *usb_if; struct pcan_usb_pro_device *pdev = container_of(dev, struct pcan_usb_pro_device, dev); + struct pcan_usb_pro_interface *usb_if = NULL; + struct pcan_usb_pro_fwinfo *fi = NULL; + struct pcan_usb_pro_blinfo *bi = NULL; + int err; /* do this for 1st channel only */ if (!dev->prev_siblings) { - struct pcan_usb_pro_fwinfo fi; - struct pcan_usb_pro_blinfo bi; - int err; - /* allocate netdevices common structure attached to first one */ usb_if = kzalloc(sizeof(struct pcan_usb_pro_interface), GFP_KERNEL); - if (!usb_if) - return -ENOMEM; + fi = kmalloc(sizeof(struct pcan_usb_pro_fwinfo), GFP_KERNEL); + bi = kmalloc(sizeof(struct pcan_usb_pro_blinfo), GFP_KERNEL); + if (!usb_if || !fi || !bi) { + err = -ENOMEM; + goto err_out; + } /* number of ts msgs to ignore before taking one into account */ usb_if->cm_ignore_count = 5; @@ -877,34 +889,34 @@ static int pcan_usb_pro_init(struct peak_usb_device *dev) */ err = pcan_usb_pro_send_req(dev, PCAN_USBPRO_REQ_INFO, PCAN_USBPRO_INFO_FW, - &fi, sizeof(fi)); + fi, sizeof(*fi)); if (err) { - kfree(usb_if); dev_err(dev->netdev->dev.parent, "unable to read %s firmware info (err %d)\n", pcan_usb_pro.name, err); - return err; + goto err_out; } err = pcan_usb_pro_send_req(dev, PCAN_USBPRO_REQ_INFO, PCAN_USBPRO_INFO_BL, - &bi, sizeof(bi)); + bi, sizeof(*bi)); if (err) { - kfree(usb_if); dev_err(dev->netdev->dev.parent, "unable to read %s bootloader info (err %d)\n", pcan_usb_pro.name, err); - return err; + goto err_out; } + /* tell the device the can driver is running */ + err = pcan_usb_pro_drv_loaded(dev, 1); + if (err) + goto err_out; + dev_info(dev->netdev->dev.parent, "PEAK-System %s hwrev %u serial %08X.%08X (%u channels)\n", pcan_usb_pro.name, - bi.hw_rev, bi.serial_num_hi, bi.serial_num_lo, + bi->hw_rev, bi->serial_num_hi, bi->serial_num_lo, pcan_usb_pro.ctrl_count); - - /* tell the device the can driver is running */ - pcan_usb_pro_drv_loaded(dev, 1); } else { usb_if = pcan_usb_pro_dev_if(dev->prev_siblings); } @@ -916,6 +928,13 @@ static int pcan_usb_pro_init(struct peak_usb_device *dev) pcan_usb_pro_set_led(dev, 0, 1); return 0; + + err_out: + kfree(bi); + kfree(fi); + kfree(usb_if); + + return err; } static void pcan_usb_pro_exit(struct peak_usb_device *dev) diff --git a/drivers/net/can/usb/peak_usb/pcan_usb_pro.h b/drivers/net/can/usb/peak_usb/pcan_usb_pro.h index a869918c5620..32275af547e0 100644 --- a/drivers/net/can/usb/peak_usb/pcan_usb_pro.h +++ b/drivers/net/can/usb/peak_usb/pcan_usb_pro.h @@ -29,6 +29,7 @@ /* Vendor Request value for XXX_FCT */ #define PCAN_USBPRO_FCT_DRVLD 5 /* tell device driver is loaded */ +#define PCAN_USBPRO_FCT_DRVLD_REQ_LEN 16 /* PCAN_USBPRO_INFO_BL vendor request record type */ struct __packed pcan_usb_pro_blinfo { -- cgit v1.2.3 From 28420dad233520811c0e0860e7fb4975ed863fc4 Mon Sep 17 00:00:00 2001 From: Miklos Szeredi Date: Mon, 3 Jun 2013 14:40:22 +0200 Subject: fuse: fix readdirplus Oops in fuse_dentry_revalidate Fix bug introduced by commit 4582a4ab2a "FUSE: Adapt readdirplus to application usage patterns". We need to check for a positive dentry; negative dentries are not added by readdirplus. Secondly we need to advise the use of readdirplus on the *parent*, otherwise the whole thing is useless. Thirdly all this is only relevant if "readdirplus_auto" mode is selected by the filesystem. We advise the use of readdirplus only if the dentry was still valid. If we had to redo the lookup then there was no use in doing the -plus version. Reported-by: Bernd Schubert Signed-off-by: Miklos Szeredi CC: Feng Shuo CC: stable@vger.kernel.org --- fs/fuse/dir.c | 12 +++++++++--- fs/fuse/inode.c | 7 ++++--- 2 files changed, 13 insertions(+), 6 deletions(-) diff --git a/fs/fuse/dir.c b/fs/fuse/dir.c index 254df56b847b..f3f783dc4f75 100644 --- a/fs/fuse/dir.c +++ b/fs/fuse/dir.c @@ -180,6 +180,8 @@ u64 fuse_get_attr_version(struct fuse_conn *fc) static int fuse_dentry_revalidate(struct dentry *entry, unsigned int flags) { struct inode *inode; + struct dentry *parent; + struct fuse_conn *fc; inode = ACCESS_ONCE(entry->d_inode); if (inode && is_bad_inode(inode)) @@ -187,10 +189,8 @@ static int fuse_dentry_revalidate(struct dentry *entry, unsigned int flags) else if (fuse_dentry_time(entry) < get_jiffies_64()) { int err; struct fuse_entry_out outarg; - struct fuse_conn *fc; struct fuse_req *req; struct fuse_forget_link *forget; - struct dentry *parent; u64 attr_version; /* For negative dentries, always do a fresh lookup */ @@ -241,8 +241,14 @@ static int fuse_dentry_revalidate(struct dentry *entry, unsigned int flags) entry_attr_timeout(&outarg), attr_version); fuse_change_entry_timeout(entry, &outarg); + } else if (inode) { + fc = get_fuse_conn(inode); + if (fc->readdirplus_auto) { + parent = dget_parent(entry); + fuse_advise_use_readdirplus(parent->d_inode); + dput(parent); + } } - fuse_advise_use_readdirplus(inode); return 1; } diff --git a/fs/fuse/inode.c b/fs/fuse/inode.c index 6201f81e4d3a..9a0cdde14a08 100644 --- a/fs/fuse/inode.c +++ b/fs/fuse/inode.c @@ -867,10 +867,11 @@ static void process_init_reply(struct fuse_conn *fc, struct fuse_req *req) fc->dont_mask = 1; if (arg->flags & FUSE_AUTO_INVAL_DATA) fc->auto_inval_data = 1; - if (arg->flags & FUSE_DO_READDIRPLUS) + if (arg->flags & FUSE_DO_READDIRPLUS) { fc->do_readdirplus = 1; - if (arg->flags & FUSE_READDIRPLUS_AUTO) - fc->readdirplus_auto = 1; + if (arg->flags & FUSE_READDIRPLUS_AUTO) + fc->readdirplus_auto = 1; + } if (arg->flags & FUSE_ASYNC_DIO) fc->async_dio = 1; } else { -- cgit v1.2.3 From c9ecf989cc7626e9edf8abef79f64b909542129b Mon Sep 17 00:00:00 2001 From: Brian Foster Date: Thu, 30 May 2013 15:35:50 -0400 Subject: fuse: return -EIOCBQUEUED from fuse_direct_IO() for all async requests If request submission fails for an async request (i.e., get_user_pages() returns -ERESTARTSYS), we currently skip the -EIOCBQUEUED return and drop into wait_for_sync_kiocb() forever. Avoid this by always returning -EIOCBQUEUED for async requests. If an error occurs, the error is passed into fuse_aio_complete(), returned via aio_complete() and thus propagated to userspace via io_getevents(). Signed-off-by: Brian Foster Reviewed-by: Maxim Patlasov Signed-off-by: Miklos Szeredi --- fs/fuse/file.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/fuse/file.c b/fs/fuse/file.c index d9f467907791..b3ad8d61a162 100644 --- a/fs/fuse/file.c +++ b/fs/fuse/file.c @@ -2432,7 +2432,7 @@ fuse_direct_IO(int rw, struct kiocb *iocb, const struct iovec *iov, fuse_aio_complete(io, ret < 0 ? ret : 0, -1); /* we have a non-extending, async request, so return */ - if (ret > 0 && !is_sync_kiocb(iocb)) + if (!is_sync_kiocb(iocb)) return -EIOCBQUEUED; ret = wait_on_sync_kiocb(iocb); -- cgit v1.2.3 From e5c5f05dca0cf90f0f3bb1aea85dcf658baff185 Mon Sep 17 00:00:00 2001 From: Maxim Patlasov Date: Thu, 30 May 2013 16:41:34 +0400 Subject: fuse: fix alignment in short read optimization for async_dio The bug was introduced with async_dio feature: trying to optimize short reads, we cut number-of-bytes-to-read to i_size boundary. Hence the following example: truncate --size=300 /mnt/file dd if=/mnt/file of=/dev/null iflag=direct led to FUSE_READ request of 300 bytes size. This turned out to be problem for userspace fuse implementations who rely on assumption that kernel fuse does not change alignment of request from client FS. The patch turns off the optimization if async_dio is disabled. And, if it's enabled, the patch fixes adjustment of number-of-bytes-to-read to preserve alignment. Note, that we cannot throw out short read optimization entirely because otherwise a direct read of a huge size issued on a tiny file would generate a huge amount of fuse requests and most of them would be ACKed by userspace with zero bytes read. Signed-off-by: Maxim Patlasov Reviewed-by: Brian Foster Signed-off-by: Miklos Szeredi --- fs/fuse/file.c | 14 ++++++++++---- 1 file changed, 10 insertions(+), 4 deletions(-) diff --git a/fs/fuse/file.c b/fs/fuse/file.c index b3ad8d61a162..e570081f9f76 100644 --- a/fs/fuse/file.c +++ b/fs/fuse/file.c @@ -2373,6 +2373,11 @@ static void fuse_do_truncate(struct file *file) fuse_do_setattr(inode, &attr, file); } +static inline loff_t fuse_round_up(loff_t off) +{ + return round_up(off, FUSE_MAX_PAGES_PER_REQ << PAGE_SHIFT); +} + static ssize_t fuse_direct_IO(int rw, struct kiocb *iocb, const struct iovec *iov, loff_t offset, unsigned long nr_segs) @@ -2380,6 +2385,7 @@ fuse_direct_IO(int rw, struct kiocb *iocb, const struct iovec *iov, ssize_t ret = 0; struct file *file = iocb->ki_filp; struct fuse_file *ff = file->private_data; + bool async_dio = ff->fc->async_dio; loff_t pos = 0; struct inode *inode; loff_t i_size; @@ -2391,10 +2397,10 @@ fuse_direct_IO(int rw, struct kiocb *iocb, const struct iovec *iov, i_size = i_size_read(inode); /* optimization for short read */ - if (rw != WRITE && offset + count > i_size) { + if (async_dio && rw != WRITE && offset + count > i_size) { if (offset >= i_size) return 0; - count = i_size - offset; + count = min_t(loff_t, count, fuse_round_up(i_size - offset)); } io = kmalloc(sizeof(struct fuse_io_priv), GFP_KERNEL); @@ -2412,7 +2418,7 @@ fuse_direct_IO(int rw, struct kiocb *iocb, const struct iovec *iov, * By default, we want to optimize all I/Os with async request * submission to the client filesystem if supported. */ - io->async = ff->fc->async_dio; + io->async = async_dio; io->iocb = iocb; /* @@ -2420,7 +2426,7 @@ fuse_direct_IO(int rw, struct kiocb *iocb, const struct iovec *iov, * to wait on real async I/O requests, so we must submit this request * synchronously. */ - if (!is_sync_kiocb(iocb) && (offset + count > i_size)) + if (!is_sync_kiocb(iocb) && (offset + count > i_size) && rw == WRITE) io->async = false; if (rw == WRITE) -- cgit v1.2.3 From 4a586812055dbd2588b0836ab758f6b9670c3949 Mon Sep 17 00:00:00 2001 From: Bob Peterson Date: Fri, 24 May 2013 15:02:49 -0400 Subject: GFS2: Set log descriptor type for jdata blocks This patch sets the log descriptor type according to whether the journal commit is for (journaled) data or metadata. This was recently broken when the functions to process data and metadata log ops were combined. Signed-off-by: Bob Peterson Signed-off-by: Steven Whitehouse --- fs/gfs2/lops.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/fs/gfs2/lops.c b/fs/gfs2/lops.c index 68b4c8f1fce8..6c33d7b6e0c4 100644 --- a/fs/gfs2/lops.c +++ b/fs/gfs2/lops.c @@ -419,7 +419,9 @@ static void gfs2_before_commit(struct gfs2_sbd *sdp, unsigned int limit, if (total > limit) num = limit; gfs2_log_unlock(sdp); - page = gfs2_get_log_desc(sdp, GFS2_LOG_DESC_METADATA, num + 1, num); + page = gfs2_get_log_desc(sdp, + is_databuf ? GFS2_LOG_DESC_JDATA : + GFS2_LOG_DESC_METADATA, num + 1, num); ld = page_address(page); gfs2_log_lock(sdp); ptr = (__be64 *)(ld + 1); -- cgit v1.2.3 From 2b3dcf35810ff02ad0e785527a25c1b13bf82b19 Mon Sep 17 00:00:00 2001 From: Bob Peterson Date: Tue, 28 May 2013 10:04:44 -0400 Subject: GFS2: Increase i_writecount during gfs2_setattr_size This patch calls get_write_access in a few functions. This merely increases inode->i_writecount for the duration of the function. That will ensure that any file closes won't delete the inode's multi-block reservation while the function is running. Signed-off-by: Bob Peterson Signed-off-by: Steven Whitehouse --- fs/gfs2/bmap.c | 17 +++++++++++++---- fs/gfs2/file.c | 19 +++++++++++++------ fs/gfs2/rgrp.c | 4 +++- 3 files changed, 29 insertions(+), 11 deletions(-) diff --git a/fs/gfs2/bmap.c b/fs/gfs2/bmap.c index 1dc9a13ce6bb..93b5809c20bb 100644 --- a/fs/gfs2/bmap.c +++ b/fs/gfs2/bmap.c @@ -1286,17 +1286,26 @@ int gfs2_setattr_size(struct inode *inode, u64 newsize) if (ret) return ret; + ret = get_write_access(inode); + if (ret) + return ret; + inode_dio_wait(inode); ret = gfs2_rs_alloc(GFS2_I(inode)); if (ret) - return ret; + goto out; oldsize = inode->i_size; - if (newsize >= oldsize) - return do_grow(inode, newsize); + if (newsize >= oldsize) { + ret = do_grow(inode, newsize); + goto out; + } - return do_shrink(inode, oldsize, newsize); + ret = do_shrink(inode, oldsize, newsize); +out: + put_write_access(inode); + return ret; } int gfs2_truncatei_resume(struct gfs2_inode *ip) diff --git a/fs/gfs2/file.c b/fs/gfs2/file.c index acd16764b133..ad0dc38d87ab 100644 --- a/fs/gfs2/file.c +++ b/fs/gfs2/file.c @@ -402,16 +402,20 @@ static int gfs2_page_mkwrite(struct vm_area_struct *vma, struct vm_fault *vmf) /* Update file times before taking page lock */ file_update_time(vma->vm_file); + ret = get_write_access(inode); + if (ret) + goto out; + ret = gfs2_rs_alloc(ip); if (ret) - return ret; + goto out_write_access; gfs2_size_hint(vma->vm_file, pos, PAGE_CACHE_SIZE); gfs2_holder_init(ip->i_gl, LM_ST_EXCLUSIVE, 0, &gh); ret = gfs2_glock_nq(&gh); if (ret) - goto out; + goto out_uninit; set_bit(GLF_DIRTY, &ip->i_gl->gl_flags); set_bit(GIF_SW_PAGED, &ip->i_flags); @@ -480,12 +484,15 @@ out_quota_unlock: gfs2_quota_unlock(ip); out_unlock: gfs2_glock_dq(&gh); -out: +out_uninit: gfs2_holder_uninit(&gh); if (ret == 0) { set_page_dirty(page); wait_for_stable_page(page); } +out_write_access: + put_write_access(inode); +out: sb_end_pagefault(inode->i_sb); return block_page_mkwrite_return(ret); } @@ -594,10 +601,10 @@ static int gfs2_release(struct inode *inode, struct file *file) kfree(file->private_data); file->private_data = NULL; - if ((file->f_mode & FMODE_WRITE) && - (atomic_read(&inode->i_writecount) == 1)) - gfs2_rs_delete(ip); + if (!(file->f_mode & FMODE_WRITE)) + return 0; + gfs2_rs_delete(ip); return 0; } diff --git a/fs/gfs2/rgrp.c b/fs/gfs2/rgrp.c index 5232525934ae..9809156e3d04 100644 --- a/fs/gfs2/rgrp.c +++ b/fs/gfs2/rgrp.c @@ -638,8 +638,10 @@ void gfs2_rs_deltree(struct gfs2_blkreserv *rs) */ void gfs2_rs_delete(struct gfs2_inode *ip) { + struct inode *inode = &ip->i_inode; + down_write(&ip->i_rw_mutex); - if (ip->i_res) { + if (ip->i_res && atomic_read(&inode->i_writecount) <= 1) { gfs2_rs_deltree(ip->i_res); BUG_ON(ip->i_res->rs_free); kmem_cache_free(gfs2_rsrv_cachep, ip->i_res); -- cgit v1.2.3 From e8830d8856e3ad61067dd46c05438b0d75a0441a Mon Sep 17 00:00:00 2001 From: Bob Peterson Date: Thu, 30 May 2013 09:48:56 -0400 Subject: GFS2: Fall back to vmalloc if kmalloc fails for dir hash tables This version has one more correction: the vmalloc calls are replaced by __vmalloc calls to preserve the GFP_NOFS flag. When GFS2's directory management code allocates buffers for a directory hash table, if it can't get the memory it needs, it currently gives a bad return code. Rather than giving an error, this patch allows it to use virtual memory rather than kernel memory for the hash table. This should make it possible for directories to function properly, even when kernel memory becomes very fragmented. Signed-off-by: Bob Peterson Signed-off-by: Steven Whitehouse --- fs/gfs2/dir.c | 43 +++++++++++++++++++++++++++++++++---------- 1 file changed, 33 insertions(+), 10 deletions(-) diff --git a/fs/gfs2/dir.c b/fs/gfs2/dir.c index c3e82bd23179..b631c9043460 100644 --- a/fs/gfs2/dir.c +++ b/fs/gfs2/dir.c @@ -354,22 +354,31 @@ static __be64 *gfs2_dir_get_hash_table(struct gfs2_inode *ip) return ERR_PTR(-EIO); } - hc = kmalloc(hsize, GFP_NOFS); - ret = -ENOMEM; + hc = kmalloc(hsize, GFP_NOFS | __GFP_NOWARN); + if (hc == NULL) + hc = __vmalloc(hsize, GFP_NOFS, PAGE_KERNEL); + if (hc == NULL) return ERR_PTR(-ENOMEM); ret = gfs2_dir_read_data(ip, hc, hsize); if (ret < 0) { - kfree(hc); + if (is_vmalloc_addr(hc)) + vfree(hc); + else + kfree(hc); return ERR_PTR(ret); } spin_lock(&inode->i_lock); - if (ip->i_hash_cache) - kfree(hc); - else + if (ip->i_hash_cache) { + if (is_vmalloc_addr(hc)) + vfree(hc); + else + kfree(hc); + } else { ip->i_hash_cache = hc; + } spin_unlock(&inode->i_lock); return ip->i_hash_cache; @@ -385,7 +394,10 @@ void gfs2_dir_hash_inval(struct gfs2_inode *ip) { __be64 *hc = ip->i_hash_cache; ip->i_hash_cache = NULL; - kfree(hc); + if (is_vmalloc_addr(hc)) + vfree(hc); + else + kfree(hc); } static inline int gfs2_dirent_sentinel(const struct gfs2_dirent *dent) @@ -1113,7 +1125,10 @@ static int dir_double_exhash(struct gfs2_inode *dip) if (IS_ERR(hc)) return PTR_ERR(hc); - h = hc2 = kmalloc(hsize_bytes * 2, GFP_NOFS); + h = hc2 = kmalloc(hsize_bytes * 2, GFP_NOFS | __GFP_NOWARN); + if (hc2 == NULL) + hc2 = __vmalloc(hsize_bytes * 2, GFP_NOFS, PAGE_KERNEL); + if (!hc2) return -ENOMEM; @@ -1145,7 +1160,10 @@ fail: gfs2_dinode_out(dip, dibh->b_data); brelse(dibh); out_kfree: - kfree(hc2); + if (is_vmalloc_addr(hc2)) + vfree(hc2); + else + kfree(hc2); return error; } @@ -1846,6 +1864,8 @@ static int leaf_dealloc(struct gfs2_inode *dip, u32 index, u32 len, memset(&rlist, 0, sizeof(struct gfs2_rgrp_list)); ht = kzalloc(size, GFP_NOFS); + if (ht == NULL) + ht = vzalloc(size); if (!ht) return -ENOMEM; @@ -1933,7 +1953,10 @@ out_rlist: gfs2_rlist_free(&rlist); gfs2_quota_unhold(dip); out: - kfree(ht); + if (is_vmalloc_addr(ht)) + vfree(ht); + else + kfree(ht); return error; } -- cgit v1.2.3 From a6a4d98b0124b5d3befe8b3a99f51f1b4fcc6dcf Mon Sep 17 00:00:00 2001 From: Bob Peterson Date: Wed, 29 May 2013 11:51:52 -0400 Subject: GFS2: Don't cache iopen glocks This patch makes GFS2 immediately reclaim/delete all iopen glocks as soon as they're dequeued. This allows deleters to get an EXclusive lock on iopen so files are deleted properly instead of being set as unlinked. Signed-off-by: Bob Peterson Signed-off-by: Steven Whitehouse --- fs/gfs2/inode.c | 1 + fs/gfs2/super.c | 6 +++++- 2 files changed, 6 insertions(+), 1 deletion(-) diff --git a/fs/gfs2/inode.c b/fs/gfs2/inode.c index 8833a4f264e3..62b484e4a9e4 100644 --- a/fs/gfs2/inode.c +++ b/fs/gfs2/inode.c @@ -189,6 +189,7 @@ struct inode *gfs2_inode_lookup(struct super_block *sb, unsigned int type, return inode; fail_refresh: + ip->i_iopen_gh.gh_flags |= GL_NOCACHE; ip->i_iopen_gh.gh_gl->gl_object = NULL; gfs2_glock_dq_uninit(&ip->i_iopen_gh); fail_iopen: diff --git a/fs/gfs2/super.c b/fs/gfs2/super.c index 917c8e1eb4ae..e5639dec66c4 100644 --- a/fs/gfs2/super.c +++ b/fs/gfs2/super.c @@ -1444,6 +1444,7 @@ static void gfs2_evict_inode(struct inode *inode) /* Must not read inode block until block type has been verified */ error = gfs2_glock_nq_init(ip->i_gl, LM_ST_EXCLUSIVE, GL_SKIP, &gh); if (unlikely(error)) { + ip->i_iopen_gh.gh_flags |= GL_NOCACHE; gfs2_glock_dq_uninit(&ip->i_iopen_gh); goto out; } @@ -1514,8 +1515,10 @@ out_unlock: if (gfs2_rs_active(ip->i_res)) gfs2_rs_deltree(ip->i_res); - if (test_bit(HIF_HOLDER, &ip->i_iopen_gh.gh_iflags)) + if (test_bit(HIF_HOLDER, &ip->i_iopen_gh.gh_iflags)) { + ip->i_iopen_gh.gh_flags |= GL_NOCACHE; gfs2_glock_dq(&ip->i_iopen_gh); + } gfs2_holder_uninit(&ip->i_iopen_gh); gfs2_glock_dq_uninit(&gh); if (error && error != GLR_TRYFAILED && error != -EROFS) @@ -1534,6 +1537,7 @@ out: ip->i_gl = NULL; if (ip->i_iopen_gh.gh_gl) { ip->i_iopen_gh.gh_gl->gl_object = NULL; + ip->i_iopen_gh.gh_flags |= GL_NOCACHE; gfs2_glock_dq_uninit(&ip->i_iopen_gh); } } -- cgit v1.2.3 From eeb065582a9618c1cf5b7154df7bae06aeb44636 Mon Sep 17 00:00:00 2001 From: Eric Miao Date: Tue, 4 Jun 2013 09:30:55 -0700 Subject: Input: synaptics - fix sync lost after resume on some laptops In summary, the symptom is intermittent key events lost after resume on some machines with synaptics touchpad (seems this is synaptics _only_), and key events loss is due to serio port reconnect after psmouse sync lost. Removing psmouse and inserting it back during the suspend/resume process is able to work around the issue, so the difference between psmouse_connect() and psmouse_reconnect() is the key to the root cause of this problem. After comparing the two different paths, synaptics driver has its own implementation of synaptics_reconnect(), and the missing psmouse_probe() seems significant, the patch below added psmouse_probe() to the reconnect process, and has been verified many times that the issue could not be reliably reproduced. There are two PS/2 commands in psmouse_probe(): 1. PSMOUSE_CMD_GETID 2. PSMOUSE_CMD_RESET_DIS Only the PSMOUSE_CMD_GETID seems to be significant. The PSMOUSE_CMD_RESET_DIS is irrelevant to this issue after trying several times. So we have only implemented this patch to issue the PSMOUSE_CMD_GETID so far. Tested-by: Daniel Manrique Signed-off-by: James M Leddy Signed-off-by: Dmitry Torokhov --- drivers/input/mouse/synaptics.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c index 2f78538e09d0..b2420ae19e14 100644 --- a/drivers/input/mouse/synaptics.c +++ b/drivers/input/mouse/synaptics.c @@ -1379,6 +1379,7 @@ static int synaptics_reconnect(struct psmouse *psmouse) { struct synaptics_data *priv = psmouse->private; struct synaptics_data old_priv = *priv; + unsigned char param[2]; int retry = 0; int error; @@ -1394,6 +1395,7 @@ static int synaptics_reconnect(struct psmouse *psmouse) */ ssleep(1); } + ps2_command(&psmouse->ps2dev, param, PSMOUSE_CMD_GETID); error = synaptics_detect(psmouse, 0); } while (error && ++retry < 3); -- cgit v1.2.3 From 3bd1f7e2db4124a2726f9afdeaaf82f09b0bd8eb Mon Sep 17 00:00:00 2001 From: Ping Cheng Date: Thu, 23 May 2013 10:22:33 -0700 Subject: Input: wacom - fix a typo for Cintiq 22HDT And make the lines easier to read. Signed-off-by: Ping Cheng Signed-off-by: Dmitry Torokhov --- drivers/input/tablet/wacom_wac.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c index 5c68e4486845..518282da6d85 100644 --- a/drivers/input/tablet/wacom_wac.c +++ b/drivers/input/tablet/wacom_wac.c @@ -1966,7 +1966,8 @@ static const struct wacom_features wacom_features_0xF4 = 63, WACOM_24HD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES }; static const struct wacom_features wacom_features_0xF8 = { "Wacom Cintiq 24HD touch", WACOM_PKGLEN_INTUOS, 104480, 65600, 2047, /* Pen */ - 63, WACOM_24HD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, .oVid = USB_VENDOR_ID_WACOM, .oPid = 0xf6 }; + 63, WACOM_24HD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, + .oVid = USB_VENDOR_ID_WACOM, .oPid = 0xf6 }; static const struct wacom_features wacom_features_0xF6 = { "Wacom Cintiq 24HD touch", .type = WACOM_24HDT, /* Touch */ .oVid = USB_VENDOR_ID_WACOM, .oPid = 0xf8, .touch_max = 10 }; @@ -2009,7 +2010,8 @@ static const struct wacom_features wacom_features_0xFA = 63, WACOM_22HD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES }; static const struct wacom_features wacom_features_0x5B = { "Wacom Cintiq 22HDT", WACOM_PKGLEN_INTUOS, 95840, 54260, 2047, - 63, WACOM_24HD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, .oVid = USB_VENDOR_ID_WACOM, .oPid = 0x5e }; + 63, WACOM_22HD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, + .oVid = USB_VENDOR_ID_WACOM, .oPid = 0x5e }; static const struct wacom_features wacom_features_0x5E = { "Wacom Cintiq 22HDT", .type = WACOM_24HDT, .oVid = USB_VENDOR_ID_WACOM, .oPid = 0x5b, .touch_max = 10 }; @@ -2042,7 +2044,7 @@ static const struct wacom_features wacom_features_0xE5 = static const struct wacom_features wacom_features_0xE6 = { "Wacom ISDv4 E6", WACOM_PKGLEN_TPC2FG, 27760, 15694, 255, 0, TABLETPC2FG, WACOM_INTUOS_RES, WACOM_INTUOS_RES, - .touch_max = 2 }; + .touch_max = 2 }; static const struct wacom_features wacom_features_0xEC = { "Wacom ISDv4 EC", WACOM_PKGLEN_GRAPHIRE, 25710, 14500, 255, 0, TABLETPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; -- cgit v1.2.3 From a1c6693a50391683e7f5787bb027b1aae1afbedb Mon Sep 17 00:00:00 2001 From: Sagi Grimberg Date: Tue, 4 Jun 2013 05:13:26 +0000 Subject: net/mlx4_en: Fix adaptive moderation cq update When turning on adaptive_rx under adaptive moderation, the CQ's moderation count wasn't updated according to rx_frames which resulted in too many interrupts and bandwidth drop. Signed-off-by: Sagi Grimberg Signed-off-by: Amir Vadai Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/en_netdev.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c index b35f94700093..810aab01c3c9 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c @@ -1323,6 +1323,7 @@ static void mlx4_en_auto_moderation(struct mlx4_en_priv *priv) priv->last_moder_time[ring] = moder_time; cq = &priv->rx_cq[ring]; cq->moder_time = moder_time; + cq->moder_cnt = priv->rx_frames; err = mlx4_en_set_cq_moder(priv, cq); if (err) en_err(priv, "Failed modifying moderation for cq:%d\n", -- cgit v1.2.3 From 5efe5355f22fb9b7bb64d19809c0a75805e0ccb8 Mon Sep 17 00:00:00 2001 From: Jack Morgenstein Date: Tue, 4 Jun 2013 05:13:27 +0000 Subject: net/mlx4_core: Return -EPROBE_DEFER when a VF is probed before PF is sufficiently initialized In the PF initialization, SRIOV is enabled before the PF is fully initialized. This allows the kernel to probe the newly-exposed VFs before the PF is ready to handle them (nested probes). Have the probe method return the -EPROBE_DEFER value in this situation (instead of the VF probe method retrying its initialization in a loop, and returning -EIO on failure). When -EPROBE_DEFER is returned by the VF probe method, the kernel itself will retry the probe after a suitable delay. Based upon a suggestion by Ben Hutchings Signed-off-by: Jack Morgenstein Signed-off-by: Or Gerlitz Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/cmd.c | 2 -- drivers/net/ethernet/mellanox/mlx4/main.c | 20 ++++++-------------- 2 files changed, 6 insertions(+), 16 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx4/cmd.c b/drivers/net/ethernet/mellanox/mlx4/cmd.c index 1df56cc50ee9..0e572a527154 100644 --- a/drivers/net/ethernet/mellanox/mlx4/cmd.c +++ b/drivers/net/ethernet/mellanox/mlx4/cmd.c @@ -222,8 +222,6 @@ static int mlx4_comm_cmd_poll(struct mlx4_dev *dev, u8 cmd, u16 param, * FLR process. The only non-zero result in the RESET command * is MLX4_DELAY_RESET_SLAVE*/ if ((MLX4_COMM_CMD_RESET == cmd)) { - mlx4_warn(dev, "Got slave FLRed from Communication" - " channel (ret:0x%x)\n", ret_from_pending); err = MLX4_DELAY_RESET_SLAVE; } else { mlx4_warn(dev, "Communication channel timed out\n"); diff --git a/drivers/net/ethernet/mellanox/mlx4/main.c b/drivers/net/ethernet/mellanox/mlx4/main.c index 0d32a82458bf..2f4a26039e80 100644 --- a/drivers/net/ethernet/mellanox/mlx4/main.c +++ b/drivers/net/ethernet/mellanox/mlx4/main.c @@ -1290,7 +1290,6 @@ static int mlx4_init_slave(struct mlx4_dev *dev) { struct mlx4_priv *priv = mlx4_priv(dev); u64 dma = (u64) priv->mfunc.vhcr_dma; - int num_of_reset_retries = NUM_OF_RESET_RETRIES; int ret_from_reset = 0; u32 slave_read; u32 cmd_channel_ver; @@ -1304,18 +1303,10 @@ static int mlx4_init_slave(struct mlx4_dev *dev) * NUM_OF_RESET_RETRIES times before leaving.*/ if (ret_from_reset) { if (MLX4_DELAY_RESET_SLAVE == ret_from_reset) { - msleep(SLEEP_TIME_IN_RESET); - while (ret_from_reset && num_of_reset_retries) { - mlx4_warn(dev, "slave is currently in the" - "middle of FLR. retrying..." - "(try num:%d)\n", - (NUM_OF_RESET_RETRIES - - num_of_reset_retries + 1)); - ret_from_reset = - mlx4_comm_cmd(dev, MLX4_COMM_CMD_RESET, - 0, MLX4_COMM_TIME); - num_of_reset_retries = num_of_reset_retries - 1; - } + mlx4_warn(dev, "slave is currently in the " + "middle of FLR. Deferring probe.\n"); + mutex_unlock(&priv->cmd.slave_cmd_mutex); + return -EPROBE_DEFER; } else goto err; } @@ -1526,7 +1517,8 @@ static int mlx4_init_hca(struct mlx4_dev *dev) } else { err = mlx4_init_slave(dev); if (err) { - mlx4_err(dev, "Failed to initialize slave\n"); + if (err != -EPROBE_DEFER) + mlx4_err(dev, "Failed to initialize slave\n"); return err; } -- cgit v1.2.3 From ef96f7d46ad86625237da8a35e812bdf7896e640 Mon Sep 17 00:00:00 2001 From: Or Gerlitz Date: Tue, 4 Jun 2013 05:13:28 +0000 Subject: net/mlx4_en: Handle unassigned VF MAC address correctly When a VF sense they didn't get MAC address, use random one. This will address the case of administrator not assigning MAC to the VF through the PF OS APIs and keep udev happy. Signed-off-by: Or Gerlitz Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/en_netdev.c | 16 ++++++++++++---- 1 file changed, 12 insertions(+), 4 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c index 810aab01c3c9..89c47ea84b50 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c @@ -2119,6 +2119,7 @@ int mlx4_en_init_netdev(struct mlx4_en_dev *mdev, int port, struct mlx4_en_priv *priv; int i; int err; + u64 mac_u64; dev = alloc_etherdev_mqs(sizeof(struct mlx4_en_priv), MAX_TX_RINGS, MAX_RX_RINGS); @@ -2192,10 +2193,17 @@ int mlx4_en_init_netdev(struct mlx4_en_dev *mdev, int port, dev->addr_len = ETH_ALEN; mlx4_en_u64_to_mac(dev->dev_addr, mdev->dev->caps.def_mac[priv->port]); if (!is_valid_ether_addr(dev->dev_addr)) { - en_err(priv, "Port: %d, invalid mac burned: %pM, quiting\n", - priv->port, dev->dev_addr); - err = -EINVAL; - goto out; + if (mlx4_is_slave(priv->mdev->dev)) { + eth_hw_addr_random(dev); + en_warn(priv, "Assigned random MAC address %pM\n", dev->dev_addr); + mac_u64 = mlx4_en_mac_to_u64(dev->dev_addr); + mdev->dev->caps.def_mac[priv->port] = mac_u64; + } else { + en_err(priv, "Port: %d, invalid mac burned: %pM, quiting\n", + priv->port, dev->dev_addr); + err = -EINVAL; + goto out; + } } memcpy(priv->prev_mac, dev->dev_addr, sizeof(priv->prev_mac)); -- cgit v1.2.3 From c418253f12c0a95c7cd894953644c7488899c9fd Mon Sep 17 00:00:00 2001 From: Or Gerlitz Date: Tue, 4 Jun 2013 05:13:29 +0000 Subject: net/mlx4_core: Keep VF assigned MAC in the PF admin table MAC addresses assigned by the PF to VFs were not kept in the PF driver admin table. As a result, displaying the VF MACs from the PF interface to user space showed zero address where in fact the VF got non-zero address from the PF, fix that. Signed-off-by: Or Gerlitz Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/fw.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx4/fw.c b/drivers/net/ethernet/mellanox/mlx4/fw.c index 58a8e535d698..2c97901c6a6d 100644 --- a/drivers/net/ethernet/mellanox/mlx4/fw.c +++ b/drivers/net/ethernet/mellanox/mlx4/fw.c @@ -840,12 +840,16 @@ int mlx4_QUERY_PORT_wrapper(struct mlx4_dev *dev, int slave, MLX4_CMD_NATIVE); if (!err && dev->caps.function != slave) { - /* set slave default_mac address */ - MLX4_GET(def_mac, outbox->buf, QUERY_PORT_MAC_OFFSET); - def_mac += slave << 8; /* if config MAC in DB use it */ if (priv->mfunc.master.vf_oper[slave].vport[vhcr->in_modifier].state.mac) def_mac = priv->mfunc.master.vf_oper[slave].vport[vhcr->in_modifier].state.mac; + else { + /* set slave default_mac address */ + MLX4_GET(def_mac, outbox->buf, QUERY_PORT_MAC_OFFSET); + def_mac += slave << 8; + priv->mfunc.master.vf_admin[slave].vport[vhcr->in_modifier].mac = def_mac; + } + MLX4_PUT(outbox->buf, def_mac, QUERY_PORT_MAC_OFFSET); /* get port type - currently only eth is enabled */ -- cgit v1.2.3 From 534c877928a16ae5f9776436a497109639bf67dc Mon Sep 17 00:00:00 2001 From: Gao feng Date: Sun, 2 Jun 2013 22:16:21 +0000 Subject: ipv6: assign rt6_info to inet6_ifaddr in init_loopback Commit 25fb6ca4ed9cad72f14f61629b68dc03c0d9713f "net IPv6 : Fix broken IPv6 routing table after loopback down-up" forgot to assign rt6_info to the inet6_ifaddr. When disable the net device, the rt6_info which allocated in init_loopback will not be destroied in __ipv6_ifa_notify. This will trigger the waring message below [23527.916091] unregister_netdevice: waiting for tap0 to become free. Usage count = 1 Reported-by: Arkadiusz Miskiewicz Signed-off-by: Gao feng Signed-off-by: David S. Miller --- net/ipv6/addrconf.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c index d1b2d8034b54..1bbf744c2cc3 100644 --- a/net/ipv6/addrconf.c +++ b/net/ipv6/addrconf.c @@ -2658,8 +2658,10 @@ static void init_loopback(struct net_device *dev) sp_rt = addrconf_dst_alloc(idev, &sp_ifa->addr, 0); /* Failure cases are ignored */ - if (!IS_ERR(sp_rt)) + if (!IS_ERR(sp_rt)) { + sp_ifa->rt = sp_rt; ip6_ins_rt(sp_rt); + } } read_unlock_bh(&idev->lock); } -- cgit v1.2.3 From e768fb292d362ff2742d843e346a10853bde68be Mon Sep 17 00:00:00 2001 From: Dmitry Kravkov Date: Sun, 2 Jun 2013 23:28:41 +0000 Subject: bnx2x: fix TCP offload for tunneling ipv4 over ipv6 FW was initialized with data from wrong header, this caused TSO packets have wrong IP csum. Signed-off-by: Dmitry Kravkov Signed-off-by: Ariel Elior Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c | 13 ++++++------- 1 file changed, 6 insertions(+), 7 deletions(-) diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c index be59ec4b2c30..e3fe1ce41522 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c @@ -3192,11 +3192,11 @@ static u32 bnx2x_xmit_type(struct bnx2x *bp, struct sk_buff *skb) rc |= XMIT_CSUM_TCP; if (skb_is_gso_v6(skb)) { - rc |= (XMIT_GSO_V6 | XMIT_CSUM_TCP | XMIT_CSUM_V6); + rc |= (XMIT_GSO_V6 | XMIT_CSUM_TCP); if (rc & XMIT_CSUM_ENC) rc |= XMIT_GSO_ENC_V6; } else if (skb_is_gso(skb)) { - rc |= (XMIT_GSO_V4 | XMIT_CSUM_V4 | XMIT_CSUM_TCP); + rc |= (XMIT_GSO_V4 | XMIT_CSUM_TCP); if (rc & XMIT_CSUM_ENC) rc |= XMIT_GSO_ENC_V4; } @@ -3483,19 +3483,18 @@ static void bnx2x_update_pbds_gso_enc(struct sk_buff *skb, { u16 hlen_w = 0; u8 outerip_off, outerip_len = 0; + /* from outer IP to transport */ hlen_w = (skb_inner_transport_header(skb) - skb_network_header(skb)) >> 1; /* transport len */ - if (xmit_type & XMIT_CSUM_TCP) - hlen_w += inner_tcp_hdrlen(skb) >> 1; - else - hlen_w += sizeof(struct udphdr) >> 1; + hlen_w += inner_tcp_hdrlen(skb) >> 1; pbd2->fw_ip_hdr_to_payload_w = hlen_w; - if (xmit_type & XMIT_CSUM_ENC_V4) { + /* outer IP header info */ + if (xmit_type & XMIT_CSUM_V4) { struct iphdr *iph = ip_hdr(skb); pbd2->fw_ip_csum_wo_len_flags_frag = bswab16(csum_fold((~iph->check) - -- cgit v1.2.3 From ff5b2fabf53426c15a5f041505687f94d1b2109f Mon Sep 17 00:00:00 2001 From: Lucas Stach Date: Mon, 3 Jun 2013 00:38:39 +0000 Subject: net: fec: add fallback to random MAC address If no valid MAC address could be obtained from the hardware, fall back to a randomly generated one. Signed-off-by: Pavel Machek Signed-off-by: Lucas Stach Signed-off-by: David S. Miller --- drivers/net/ethernet/freescale/fec_main.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c index 85a06037b242..a667015be22a 100644 --- a/drivers/net/ethernet/freescale/fec_main.c +++ b/drivers/net/ethernet/freescale/fec_main.c @@ -1038,6 +1038,18 @@ static void fec_get_mac(struct net_device *ndev) iap = &tmpaddr[0]; } + /* + * 5) random mac address + */ + if (!is_valid_ether_addr(iap)) { + /* Report it and use a random ethernet address instead */ + netdev_err(ndev, "Invalid MAC address: %pM\n", iap); + eth_hw_addr_random(ndev); + netdev_info(ndev, "Using random MAC address: %pM\n", + ndev->dev_addr); + return; + } + memcpy(ndev->dev_addr, iap, ETH_ALEN); /* Adjust MAC if using macaddr */ -- cgit v1.2.3 From 44dbc78ee43d5df0bbcd7f3ae6a0ba00ed261e95 Mon Sep 17 00:00:00 2001 From: Yuval Mintz Date: Mon, 3 Jun 2013 02:59:57 +0000 Subject: bnx2x: Fix bridged GSO for 57710/57711 chips It was recently found out that GSO on 57710/57711 was broken, due to packets being sent without a valid IP checksum. Commit 057cf65 "bnx2x: Fix GSO for 57710/57711 chips" partially fixed this issue, but failed to set the correct IP checksum when receiving GSO packets via bridges, as such packets enter bnx2x_tx_split() and the FW flags needed to calculate IP checksum were erroneously set in the incorrect buffer descriptor. This patch re-enables GSO in said scenario for 57710/57711 chips. Signed-off-by: Yuval Mintz Signed-off-by: Ariel Elior Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c index e3fe1ce41522..638e55435b04 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c @@ -3817,8 +3817,7 @@ netdev_tx_t bnx2x_start_xmit(struct sk_buff *skb, struct net_device *dev) bnx2x_set_pbd_gso_e2(skb, &pbd_e2_parsing_data, xmit_type); else - bnx2x_set_pbd_gso(skb, pbd_e1x, tx_start_bd, - xmit_type); + bnx2x_set_pbd_gso(skb, pbd_e1x, first_bd, xmit_type); } /* Set the PBD's parsing_data field if not zero -- cgit v1.2.3 From 3a5395b3d57b9e3836c755434c88f4590d5ea6f6 Mon Sep 17 00:00:00 2001 From: "Jens Renner \\(EFE\\)" Date: Mon, 3 Jun 2013 04:32:52 +0000 Subject: net: ethernet: xilinx_emaclite: set protocol selector bits when writing ANAR This patch sets the protocol selector bits (4:0) of the PHY's MII_ADVERTISE register (ANAR) when writing ADVERTISE_ALL. The protocol selector bits are indicating IEEE 803.3u support and are fixed / read-only on some PHYs. Not setting them correctly on others (like TI DP83630) makes the PHY fall back to 10M HDX mode which should be avoided. Tested for TI DP83630 PHY on Microblaze platform. Signed-off-by: Jens Renner Tested-by: Michal Simek Signed-off-by: David S. Miller --- drivers/net/ethernet/xilinx/xilinx_emaclite.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/xilinx/xilinx_emaclite.c b/drivers/net/ethernet/xilinx/xilinx_emaclite.c index 919b983114e9..b7268b3dae77 100644 --- a/drivers/net/ethernet/xilinx/xilinx_emaclite.c +++ b/drivers/net/ethernet/xilinx/xilinx_emaclite.c @@ -946,7 +946,8 @@ static int xemaclite_open(struct net_device *dev) phy_write(lp->phy_dev, MII_CTRL1000, 0); /* Advertise only 10 and 100mbps full/half duplex speeds */ - phy_write(lp->phy_dev, MII_ADVERTISE, ADVERTISE_ALL); + phy_write(lp->phy_dev, MII_ADVERTISE, ADVERTISE_ALL | + ADVERTISE_CSMA); /* Restart auto negotiation */ bmcr = phy_read(lp->phy_dev, MII_BMCR); -- cgit v1.2.3 From 9bc297ea0622bb2a6b3abfa2fa84f0a3b86ef8c8 Mon Sep 17 00:00:00 2001 From: Nithin Sujir Date: Mon, 3 Jun 2013 09:19:34 +0000 Subject: tg3: Add read dma workaround for 5720 Commit 091f0ea30074bc43f9250961b3247af713024bc6 "tg3: Add New 5719 Read DMA workaround" added a workaround for TX DMA stall on the 5719. This workaround needs to be applied to the 5720 as well. Cc: stable@vger.kernel.org Reported-by: Roland Dreier Tested-by: Roland Dreier Signed-off-by: Nithin Nayak Sujir Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/tg3.c | 21 +++++++++++++++------ drivers/net/ethernet/broadcom/tg3.h | 5 +++-- 2 files changed, 18 insertions(+), 8 deletions(-) diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c index 1f2dd928888a..0f493c8dc28b 100644 --- a/drivers/net/ethernet/broadcom/tg3.c +++ b/drivers/net/ethernet/broadcom/tg3.c @@ -9468,6 +9468,14 @@ static void tg3_rss_write_indir_tbl(struct tg3 *tp) } } +static inline u32 tg3_lso_rd_dma_workaround_bit(struct tg3 *tp) +{ + if (tg3_asic_rev(tp) == ASIC_REV_5719) + return TG3_LSO_RD_DMA_TX_LENGTH_WA_5719; + else + return TG3_LSO_RD_DMA_TX_LENGTH_WA_5720; +} + /* tp->lock is held. */ static int tg3_reset_hw(struct tg3 *tp, bool reset_phy) { @@ -10153,16 +10161,17 @@ static int tg3_reset_hw(struct tg3 *tp, bool reset_phy) tw32_f(RDMAC_MODE, rdmac_mode); udelay(40); - if (tg3_asic_rev(tp) == ASIC_REV_5719) { + if (tg3_asic_rev(tp) == ASIC_REV_5719 || + tg3_asic_rev(tp) == ASIC_REV_5720) { for (i = 0; i < TG3_NUM_RDMA_CHANNELS; i++) { if (tr32(TG3_RDMA_LENGTH + (i << 2)) > TG3_MAX_MTU(tp)) break; } if (i < TG3_NUM_RDMA_CHANNELS) { val = tr32(TG3_LSO_RD_DMA_CRPTEN_CTRL); - val |= TG3_LSO_RD_DMA_TX_LENGTH_WA; + val |= tg3_lso_rd_dma_workaround_bit(tp); tw32(TG3_LSO_RD_DMA_CRPTEN_CTRL, val); - tg3_flag_set(tp, 5719_RDMA_BUG); + tg3_flag_set(tp, 5719_5720_RDMA_BUG); } } @@ -10526,15 +10535,15 @@ static void tg3_periodic_fetch_stats(struct tg3 *tp) TG3_STAT_ADD32(&sp->tx_ucast_packets, MAC_TX_STATS_UCAST); TG3_STAT_ADD32(&sp->tx_mcast_packets, MAC_TX_STATS_MCAST); TG3_STAT_ADD32(&sp->tx_bcast_packets, MAC_TX_STATS_BCAST); - if (unlikely(tg3_flag(tp, 5719_RDMA_BUG) && + if (unlikely(tg3_flag(tp, 5719_5720_RDMA_BUG) && (sp->tx_ucast_packets.low + sp->tx_mcast_packets.low + sp->tx_bcast_packets.low) > TG3_NUM_RDMA_CHANNELS)) { u32 val; val = tr32(TG3_LSO_RD_DMA_CRPTEN_CTRL); - val &= ~TG3_LSO_RD_DMA_TX_LENGTH_WA; + val &= ~tg3_lso_rd_dma_workaround_bit(tp); tw32(TG3_LSO_RD_DMA_CRPTEN_CTRL, val); - tg3_flag_clear(tp, 5719_RDMA_BUG); + tg3_flag_clear(tp, 5719_5720_RDMA_BUG); } TG3_STAT_ADD32(&sp->rx_octets, MAC_RX_STATS_OCTETS); diff --git a/drivers/net/ethernet/broadcom/tg3.h b/drivers/net/ethernet/broadcom/tg3.h index 9b2d3ac2474a..ff6e30eeae35 100644 --- a/drivers/net/ethernet/broadcom/tg3.h +++ b/drivers/net/ethernet/broadcom/tg3.h @@ -1422,7 +1422,8 @@ #define TG3_LSO_RD_DMA_CRPTEN_CTRL 0x00004910 #define TG3_LSO_RD_DMA_CRPTEN_CTRL_BLEN_BD_4K 0x00030000 #define TG3_LSO_RD_DMA_CRPTEN_CTRL_BLEN_LSO_4K 0x000c0000 -#define TG3_LSO_RD_DMA_TX_LENGTH_WA 0x02000000 +#define TG3_LSO_RD_DMA_TX_LENGTH_WA_5719 0x02000000 +#define TG3_LSO_RD_DMA_TX_LENGTH_WA_5720 0x00200000 /* 0x4914 --> 0x4be0 unused */ #define TG3_NUM_RDMA_CHANNELS 4 @@ -3059,7 +3060,7 @@ enum TG3_FLAGS { TG3_FLAG_APE_HAS_NCSI, TG3_FLAG_TX_TSTAMP_EN, TG3_FLAG_4K_FIFO_LIMIT, - TG3_FLAG_5719_RDMA_BUG, + TG3_FLAG_5719_5720_RDMA_BUG, TG3_FLAG_RESET_TASK_PENDING, TG3_FLAG_PTP_CAPABLE, TG3_FLAG_5705_PLUS, -- cgit v1.2.3 From 5e71d9d77c07fa7d4c42287a177f7b738d0cd4b9 Mon Sep 17 00:00:00 2001 From: Pablo Neira Date: Mon, 3 Jun 2013 09:28:43 +0000 Subject: net: fix sk_buff head without data area Eric Dumazet spotted that we have to check skb->head instead of skb->data as skb->head points to the beginning of the data area of the skbuff. Similarly, we have to initialize the skb->head pointer, not skb->data in __alloc_skb_head. After this fix, netlink crashes in the release path of the sk_buff, so let's fix that as well. This bug was introduced in (0ebd0ac net: add function to allocate sk_buff head without data area). Reported-by: Eric Dumazet Signed-off-by: Pablo Neira Ayuso Signed-off-by: David S. Miller --- net/core/skbuff.c | 4 ++-- net/netlink/af_netlink.c | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/net/core/skbuff.c b/net/core/skbuff.c index af9185d0be6a..cfd777bd6bd0 100644 --- a/net/core/skbuff.c +++ b/net/core/skbuff.c @@ -195,7 +195,7 @@ struct sk_buff *__alloc_skb_head(gfp_t gfp_mask, int node) * the tail pointer in struct sk_buff! */ memset(skb, 0, offsetof(struct sk_buff, tail)); - skb->data = NULL; + skb->head = NULL; skb->truesize = sizeof(struct sk_buff); atomic_set(&skb->users, 1); @@ -611,7 +611,7 @@ static void skb_release_head_state(struct sk_buff *skb) static void skb_release_all(struct sk_buff *skb) { skb_release_head_state(skb); - if (likely(skb->data)) + if (likely(skb->head)) skb_release_data(skb); } diff --git a/net/netlink/af_netlink.c b/net/netlink/af_netlink.c index 12ac6b47a35c..d0b3dd60d386 100644 --- a/net/netlink/af_netlink.c +++ b/net/netlink/af_netlink.c @@ -747,7 +747,7 @@ static void netlink_skb_destructor(struct sk_buff *skb) atomic_dec(&ring->pending); sock_put(sk); - skb->data = NULL; + skb->head = NULL; } #endif if (skb->sk != NULL) -- cgit v1.2.3 From 5343a7f8be11951cb3095b91e8e4eb506cfacc0f Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Tue, 4 Jun 2013 07:11:48 +0000 Subject: net_sched: htb: do not mix 1ns and 64ns time units commit 56b765b79 ("htb: improved accuracy at high rates") added another regression for low rates, because it mixes 1ns and 64ns time units. So the maximum delay (mbuffer) was not 60 second, but 937 ms. Lets convert all time fields to 1ns as 64bit arches are becoming the norm. Reported-by: Jesper Dangaard Brouer Signed-off-by: Eric Dumazet Tested-by: Jesper Dangaard Brouer Signed-off-by: David S. Miller --- net/sched/sch_htb.c | 34 +++++++++++++++++----------------- 1 file changed, 17 insertions(+), 17 deletions(-) diff --git a/net/sched/sch_htb.c b/net/sched/sch_htb.c index f87fb850b7ef..adaedd79389c 100644 --- a/net/sched/sch_htb.c +++ b/net/sched/sch_htb.c @@ -109,7 +109,7 @@ struct htb_class { } un; struct rb_node node[TC_HTB_NUMPRIO]; /* node for self or feed tree */ struct rb_node pq_node; /* node for event queue */ - psched_time_t pq_key; + s64 pq_key; int prio_activity; /* for which prios are we active */ enum htb_cmode cmode; /* current mode of the class */ @@ -121,10 +121,10 @@ struct htb_class { /* token bucket parameters */ struct psched_ratecfg rate; struct psched_ratecfg ceil; - s64 buffer, cbuffer; /* token bucket depth/rate */ - psched_tdiff_t mbuffer; /* max wait time */ - s64 tokens, ctokens; /* current number of tokens */ - psched_time_t t_c; /* checkpoint time */ + s64 buffer, cbuffer; /* token bucket depth/rate */ + s64 mbuffer; /* max wait time */ + s64 tokens, ctokens; /* current number of tokens */ + s64 t_c; /* checkpoint time */ }; struct htb_sched { @@ -141,15 +141,15 @@ struct htb_sched { struct rb_root wait_pq[TC_HTB_MAXDEPTH]; /* time of nearest event per level (row) */ - psched_time_t near_ev_cache[TC_HTB_MAXDEPTH]; + s64 near_ev_cache[TC_HTB_MAXDEPTH]; int defcls; /* class where unclassified flows go to */ /* filters for qdisc itself */ struct tcf_proto *filter_list; - int rate2quantum; /* quant = rate / rate2quantum */ - psched_time_t now; /* cached dequeue time */ + int rate2quantum; /* quant = rate / rate2quantum */ + s64 now; /* cached dequeue time */ struct qdisc_watchdog watchdog; /* non shaped skbs; let them go directly thru */ @@ -664,8 +664,8 @@ static void htb_charge_class(struct htb_sched *q, struct htb_class *cl, * next pending event (0 for no event in pq, q->now for too many events). * Note: Applied are events whose have cl->pq_key <= q->now. */ -static psched_time_t htb_do_events(struct htb_sched *q, int level, - unsigned long start) +static s64 htb_do_events(struct htb_sched *q, int level, + unsigned long start) { /* don't run for longer than 2 jiffies; 2 is used instead of * 1 to simplify things when jiffy is going to be incremented @@ -857,7 +857,7 @@ static struct sk_buff *htb_dequeue(struct Qdisc *sch) struct sk_buff *skb; struct htb_sched *q = qdisc_priv(sch); int level; - psched_time_t next_event; + s64 next_event; unsigned long start_at; /* try to dequeue direct packets as high prio (!) to minimize cpu work */ @@ -880,7 +880,7 @@ ok: for (level = 0; level < TC_HTB_MAXDEPTH; level++) { /* common case optimization - skip event handler quickly */ int m; - psched_time_t event; + s64 event; if (q->now >= q->near_ev_cache[level]) { event = htb_do_events(q, level, start_at); @@ -1117,8 +1117,8 @@ htb_dump_class_stats(struct Qdisc *sch, unsigned long arg, struct gnet_dump *d) if (!cl->level && cl->un.leaf.q) cl->qstats.qlen = cl->un.leaf.q->q.qlen; - cl->xstats.tokens = cl->tokens; - cl->xstats.ctokens = cl->ctokens; + cl->xstats.tokens = PSCHED_NS2TICKS(cl->tokens); + cl->xstats.ctokens = PSCHED_NS2TICKS(cl->ctokens); if (gnet_stats_copy_basic(d, &cl->bstats) < 0 || gnet_stats_copy_rate_est(d, NULL, &cl->rate_est) < 0 || @@ -1200,7 +1200,7 @@ static void htb_parent_to_leaf(struct htb_sched *q, struct htb_class *cl, parent->un.leaf.q = new_q ? new_q : &noop_qdisc; parent->tokens = parent->buffer; parent->ctokens = parent->cbuffer; - parent->t_c = psched_get_time(); + parent->t_c = ktime_to_ns(ktime_get()); parent->cmode = HTB_CAN_SEND; } @@ -1417,8 +1417,8 @@ static int htb_change_class(struct Qdisc *sch, u32 classid, /* set class to be in HTB_CAN_SEND state */ cl->tokens = PSCHED_TICKS2NS(hopt->buffer); cl->ctokens = PSCHED_TICKS2NS(hopt->cbuffer); - cl->mbuffer = 60 * PSCHED_TICKS_PER_SEC; /* 1min */ - cl->t_c = psched_get_time(); + cl->mbuffer = 60ULL * NSEC_PER_SEC; /* 1min */ + cl->t_c = ktime_to_ns(ktime_get()); cl->cmode = HTB_CAN_SEND; /* attach to the hash list and parent's family */ -- cgit v1.2.3