From 8cf460a5d7c12e16ba29d0e4940df4657a7439cc Mon Sep 17 00:00:00 2001 From: Kukjin Kim Date: Mon, 15 Nov 2010 09:18:57 +0900 Subject: ARM: S5P: Move the SROM register definitions to plat-s5p The SROM register difinitions of S5PV310/S5PC210 (mach/regs-srom.h) can be used to other S5P SoCs such as S5PV210/S5PC110. So moved into plat/regs-srom.h of plat-s5p directory. Signed-off-by: Kukjin Kim --- arch/arm/mach-s5pv310/include/mach/regs-srom.h | 50 -------------------------- arch/arm/mach-s5pv310/mach-smdkc210.c | 31 ++++++++-------- arch/arm/mach-s5pv310/mach-smdkv310.c | 31 ++++++++-------- arch/arm/plat-s5p/include/plat/regs-srom.h | 50 ++++++++++++++++++++++++++ 4 files changed, 80 insertions(+), 82 deletions(-) delete mode 100644 arch/arm/mach-s5pv310/include/mach/regs-srom.h create mode 100644 arch/arm/plat-s5p/include/plat/regs-srom.h diff --git a/arch/arm/mach-s5pv310/include/mach/regs-srom.h b/arch/arm/mach-s5pv310/include/mach/regs-srom.h deleted file mode 100644 index 1898b3e10550..000000000000 --- a/arch/arm/mach-s5pv310/include/mach/regs-srom.h +++ /dev/null @@ -1,50 +0,0 @@ -/* linux/arch/arm/mach-s5pv310/include/mach/regs-srom.h - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * S5PV310 - SROMC register definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_REGS_SROM_H -#define __ASM_ARCH_REGS_SROM_H __FILE__ - -#include - -#define S5PV310_SROMREG(x) (S5P_VA_SROMC + (x)) - -#define S5PV310_SROM_BW S5PV310_SROMREG(0x0) -#define S5PV310_SROM_BC0 S5PV310_SROMREG(0x4) -#define S5PV310_SROM_BC1 S5PV310_SROMREG(0x8) -#define S5PV310_SROM_BC2 S5PV310_SROMREG(0xc) -#define S5PV310_SROM_BC3 S5PV310_SROMREG(0x10) - -/* one register BW holds 4 x 4-bit packed settings for NCS0 - NCS3 */ - -#define S5PV310_SROM_BW__DATAWIDTH__SHIFT 0 -#define S5PV310_SROM_BW__ADDRMODE__SHIFT 1 -#define S5PV310_SROM_BW__WAITENABLE__SHIFT 2 -#define S5PV310_SROM_BW__BYTEENABLE__SHIFT 3 - -#define S5PV310_SROM_BW__CS_MASK 0xf - -#define S5PV310_SROM_BW__NCS0__SHIFT 0 -#define S5PV310_SROM_BW__NCS1__SHIFT 4 -#define S5PV310_SROM_BW__NCS2__SHIFT 8 -#define S5PV310_SROM_BW__NCS3__SHIFT 12 - -/* applies to same to BCS0 - BCS3 */ - -#define S5PV310_SROM_BCX__PMC__SHIFT 0 -#define S5PV310_SROM_BCX__TACP__SHIFT 4 -#define S5PV310_SROM_BCX__TCAH__SHIFT 8 -#define S5PV310_SROM_BCX__TCOH__SHIFT 12 -#define S5PV310_SROM_BCX__TACC__SHIFT 16 -#define S5PV310_SROM_BCX__TCOS__SHIFT 24 -#define S5PV310_SROM_BCX__TACS__SHIFT 28 - -#endif /* __ASM_ARCH_REGS_SROM_H */ diff --git a/arch/arm/mach-s5pv310/mach-smdkc210.c b/arch/arm/mach-s5pv310/mach-smdkc210.c index 2b8d4fc52d7c..62956d3488b1 100644 --- a/arch/arm/mach-s5pv310/mach-smdkc210.c +++ b/arch/arm/mach-s5pv310/mach-smdkc210.c @@ -19,13 +19,13 @@ #include #include +#include #include #include #include #include #include -#include /* Following are default values for UCON, ULCON and UFCON UART registers */ #define SMDKC210_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ @@ -154,23 +154,22 @@ static void __init smdkc210_smsc911x_init(void) u32 cs1; /* configure nCS1 width to 16 bits */ - cs1 = __raw_readl(S5PV310_SROM_BW) & - ~(S5PV310_SROM_BW__CS_MASK << - S5PV310_SROM_BW__NCS1__SHIFT); - cs1 |= ((1 << S5PV310_SROM_BW__DATAWIDTH__SHIFT) | - (1 << S5PV310_SROM_BW__WAITENABLE__SHIFT) | - (1 << S5PV310_SROM_BW__BYTEENABLE__SHIFT)) << - S5PV310_SROM_BW__NCS1__SHIFT; - __raw_writel(cs1, S5PV310_SROM_BW); + cs1 = __raw_readl(S5P_SROM_BW) & + ~(S5P_SROM_BW__CS_MASK << S5P_SROM_BW__NCS1__SHIFT); + cs1 |= ((1 << S5P_SROM_BW__DATAWIDTH__SHIFT) | + (1 << S5P_SROM_BW__WAITENABLE__SHIFT) | + (1 << S5P_SROM_BW__BYTEENABLE__SHIFT)) << + S5P_SROM_BW__NCS1__SHIFT; + __raw_writel(cs1, S5P_SROM_BW); /* set timing for nCS1 suitable for ethernet chip */ - __raw_writel((0x1 << S5PV310_SROM_BCX__PMC__SHIFT) | - (0x9 << S5PV310_SROM_BCX__TACP__SHIFT) | - (0xc << S5PV310_SROM_BCX__TCAH__SHIFT) | - (0x1 << S5PV310_SROM_BCX__TCOH__SHIFT) | - (0x6 << S5PV310_SROM_BCX__TACC__SHIFT) | - (0x1 << S5PV310_SROM_BCX__TCOS__SHIFT) | - (0x1 << S5PV310_SROM_BCX__TACS__SHIFT), S5PV310_SROM_BC1); + __raw_writel((0x1 << S5P_SROM_BCX__PMC__SHIFT) | + (0x9 << S5P_SROM_BCX__TACP__SHIFT) | + (0xc << S5P_SROM_BCX__TCAH__SHIFT) | + (0x1 << S5P_SROM_BCX__TCOH__SHIFT) | + (0x6 << S5P_SROM_BCX__TACC__SHIFT) | + (0x1 << S5P_SROM_BCX__TCOS__SHIFT) | + (0x1 << S5P_SROM_BCX__TACS__SHIFT), S5P_SROM_BC1); } static void __init smdkc210_map_io(void) diff --git a/arch/arm/mach-s5pv310/mach-smdkv310.c b/arch/arm/mach-s5pv310/mach-smdkv310.c index 35826d66632c..342660232342 100644 --- a/arch/arm/mach-s5pv310/mach-smdkv310.c +++ b/arch/arm/mach-s5pv310/mach-smdkv310.c @@ -19,13 +19,13 @@ #include #include +#include #include #include #include #include #include -#include /* Following are default values for UCON, ULCON and UFCON UART registers */ #define SMDKV310_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ @@ -154,23 +154,22 @@ static void __init smdkv310_smsc911x_init(void) u32 cs1; /* configure nCS1 width to 16 bits */ - cs1 = __raw_readl(S5PV310_SROM_BW) & - ~(S5PV310_SROM_BW__CS_MASK << - S5PV310_SROM_BW__NCS1__SHIFT); - cs1 |= ((1 << S5PV310_SROM_BW__DATAWIDTH__SHIFT) | - (1 << S5PV310_SROM_BW__WAITENABLE__SHIFT) | - (1 << S5PV310_SROM_BW__BYTEENABLE__SHIFT)) << - S5PV310_SROM_BW__NCS1__SHIFT; - __raw_writel(cs1, S5PV310_SROM_BW); + cs1 = __raw_readl(S5P_SROM_BW) & + ~(S5P_SROM_BW__CS_MASK << S5P_SROM_BW__NCS1__SHIFT); + cs1 |= ((1 << S5P_SROM_BW__DATAWIDTH__SHIFT) | + (1 << S5P_SROM_BW__WAITENABLE__SHIFT) | + (1 << S5P_SROM_BW__BYTEENABLE__SHIFT)) << + S5P_SROM_BW__NCS1__SHIFT; + __raw_writel(cs1, S5P_SROM_BW); /* set timing for nCS1 suitable for ethernet chip */ - __raw_writel((0x1 << S5PV310_SROM_BCX__PMC__SHIFT) | - (0x9 << S5PV310_SROM_BCX__TACP__SHIFT) | - (0xc << S5PV310_SROM_BCX__TCAH__SHIFT) | - (0x1 << S5PV310_SROM_BCX__TCOH__SHIFT) | - (0x6 << S5PV310_SROM_BCX__TACC__SHIFT) | - (0x1 << S5PV310_SROM_BCX__TCOS__SHIFT) | - (0x1 << S5PV310_SROM_BCX__TACS__SHIFT), S5PV310_SROM_BC1); + __raw_writel((0x1 << S5P_SROM_BCX__PMC__SHIFT) | + (0x9 << S5P_SROM_BCX__TACP__SHIFT) | + (0xc << S5P_SROM_BCX__TCAH__SHIFT) | + (0x1 << S5P_SROM_BCX__TCOH__SHIFT) | + (0x6 << S5P_SROM_BCX__TACC__SHIFT) | + (0x1 << S5P_SROM_BCX__TCOS__SHIFT) | + (0x1 << S5P_SROM_BCX__TACS__SHIFT), S5P_SROM_BC1); } static void __init smdkv310_map_io(void) diff --git a/arch/arm/plat-s5p/include/plat/regs-srom.h b/arch/arm/plat-s5p/include/plat/regs-srom.h new file mode 100644 index 000000000000..0fdac48a5985 --- /dev/null +++ b/arch/arm/plat-s5p/include/plat/regs-srom.h @@ -0,0 +1,50 @@ +/* linux/arch/arm/plat-s5p/include/plat/regs-srom.h + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * S5P SROMC register definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_PLAT_S5P_REGS_SROM_H +#define __ASM_PLAT_S5P_REGS_SROM_H __FILE__ + +#include + +#define S5P_SROMREG(x) (S5P_VA_SROMC + (x)) + +#define S5P_SROM_BW S5P_SROMREG(0x0) +#define S5P_SROM_BC0 S5P_SROMREG(0x4) +#define S5P_SROM_BC1 S5P_SROMREG(0x8) +#define S5P_SROM_BC2 S5P_SROMREG(0xc) +#define S5P_SROM_BC3 S5P_SROMREG(0x10) + +/* one register BW holds 4 x 4-bit packed settings for NCS0 - NCS3 */ + +#define S5P_SROM_BW__DATAWIDTH__SHIFT 0 +#define S5P_SROM_BW__ADDRMODE__SHIFT 1 +#define S5P_SROM_BW__WAITENABLE__SHIFT 2 +#define S5P_SROM_BW__BYTEENABLE__SHIFT 3 + +#define S5P_SROM_BW__CS_MASK 0xf + +#define S5P_SROM_BW__NCS0__SHIFT 0 +#define S5P_SROM_BW__NCS1__SHIFT 4 +#define S5P_SROM_BW__NCS2__SHIFT 8 +#define S5P_SROM_BW__NCS3__SHIFT 12 + +/* applies to same to BCS0 - BCS3 */ + +#define S5P_SROM_BCX__PMC__SHIFT 0 +#define S5P_SROM_BCX__TACP__SHIFT 4 +#define S5P_SROM_BCX__TCAH__SHIFT 8 +#define S5P_SROM_BCX__TCOH__SHIFT 12 +#define S5P_SROM_BCX__TACC__SHIFT 16 +#define S5P_SROM_BCX__TCOS__SHIFT 24 +#define S5P_SROM_BCX__TACS__SHIFT 28 + +#endif /* __ASM_PLAT_S5P_REGS_SROM_H */ -- cgit v1.2.3 From abc6c3602200a3b9268c9edece6ba2e85be7b2c4 Mon Sep 17 00:00:00 2001 From: Thomas Abraham Date: Mon, 15 Nov 2010 09:24:49 +0900 Subject: ARM: S5P: Add SROM control register shift macros for other banks. This patch adds shift macros for the SROM Bus width and control register to represent the shift count for the 5th and 6th SROM banks. Some of the S5P SOCs have them. Signed-off-by: Thomas Abraham Signed-off-by: Kukjin Kim --- arch/arm/plat-s5p/include/plat/regs-srom.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/plat-s5p/include/plat/regs-srom.h b/arch/arm/plat-s5p/include/plat/regs-srom.h index 0fdac48a5985..06189dac87bc 100644 --- a/arch/arm/plat-s5p/include/plat/regs-srom.h +++ b/arch/arm/plat-s5p/include/plat/regs-srom.h @@ -36,6 +36,8 @@ #define S5P_SROM_BW__NCS1__SHIFT 4 #define S5P_SROM_BW__NCS2__SHIFT 8 #define S5P_SROM_BW__NCS3__SHIFT 12 +#define S5P_SROM_BW__NCS4__SHIFT 16 +#define S5P_SROM_BW__NCS5__SHIFT 20 /* applies to same to BCS0 - BCS3 */ -- cgit v1.2.3 From 8233ab6aecf8c103504c3c3b1b055b2d9806fa3e Mon Sep 17 00:00:00 2001 From: Thomas Abraham Date: Wed, 1 Dec 2010 18:02:30 +0530 Subject: ARM: S5P: Add SROM bank 4 and 5 register offsets Some of the S5P platforms like S5PC100 and S5PV210 include SROM banks 4 and 5 in addition to SROM banks 0 to 3. This patch adds register offsets for SROM bank 4 and 5. Signed-off-by: Thomas Abraham Signed-off-by: Kukjin Kim --- arch/arm/plat-s5p/include/plat/regs-srom.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/plat-s5p/include/plat/regs-srom.h b/arch/arm/plat-s5p/include/plat/regs-srom.h index 06189dac87bc..f121ab5e76cb 100644 --- a/arch/arm/plat-s5p/include/plat/regs-srom.h +++ b/arch/arm/plat-s5p/include/plat/regs-srom.h @@ -22,6 +22,8 @@ #define S5P_SROM_BC1 S5P_SROMREG(0x8) #define S5P_SROM_BC2 S5P_SROMREG(0xc) #define S5P_SROM_BC3 S5P_SROMREG(0x10) +#define S5P_SROM_BC4 S5P_SROMREG(0x14) +#define S5P_SROM_BC5 S5P_SROMREG(0x18) /* one register BW holds 4 x 4-bit packed settings for NCS0 - NCS3 */ -- cgit v1.2.3 From be297f0374d8609ccb8be805bd6de7adc90abea5 Mon Sep 17 00:00:00 2001 From: Thomas Abraham Date: Thu, 2 Dec 2010 18:06:50 +0900 Subject: ARM: S5P: Move SROM controller IO mapping to plat-s5p for S5P SoCs This patch modifies the following. 1. Moves the SROM controller mapping from S5PV210 specific code to S5P common code. The SROM controller mapping can be used for all S5P SoCs. 2. Define the SROM controller physical address for S5P64X0, S5P6442, S5PC100, S5PV210 and S5PV310. Signed-off-by: Thomas Abraham Signed-off-by: Kukjin Kim --- arch/arm/mach-s5p6442/include/mach/map.h | 3 +++ arch/arm/mach-s5p64x0/include/mach/map.h | 3 +++ arch/arm/mach-s5pc100/include/mach/map.h | 2 ++ arch/arm/mach-s5pv210/cpu.c | 5 ----- arch/arm/mach-s5pv210/include/mach/map.h | 1 + arch/arm/mach-s5pv310/include/mach/map.h | 1 + arch/arm/plat-s5p/cpu.c | 5 +++++ 7 files changed, 15 insertions(+), 5 deletions(-) diff --git a/arch/arm/mach-s5p6442/include/mach/map.h b/arch/arm/mach-s5p6442/include/mach/map.h index 31fb2e68d527..203dd5a18bd5 100644 --- a/arch/arm/mach-s5p6442/include/mach/map.h +++ b/arch/arm/mach-s5p6442/include/mach/map.h @@ -28,6 +28,9 @@ #define S5P6442_PA_VIC1 (0xE4100000) #define S5P6442_PA_VIC2 (0xE4200000) +#define S5P6442_PA_SROMC (0xE7000000) +#define S5P_PA_SROMC S5P6442_PA_SROMC + #define S5P6442_PA_MDMA 0xE8000000 #define S5P6442_PA_PDMA 0xE9000000 diff --git a/arch/arm/mach-s5p64x0/include/mach/map.h b/arch/arm/mach-s5p64x0/include/mach/map.h index 31e534156e06..bdf108bbf8fa 100644 --- a/arch/arm/mach-s5p64x0/include/mach/map.h +++ b/arch/arm/mach-s5p64x0/include/mach/map.h @@ -29,6 +29,9 @@ #define S5P64X0_PA_VIC0 (0xE4000000) #define S5P64X0_PA_VIC1 (0xE4100000) +#define S5P64X0_PA_SROMC (0xE7000000) +#define S5P_PA_SROMC S5P64X0_PA_SROMC + #define S5P64X0_PA_PDMA (0xE9000000) #define S5P64X0_PA_TIMER (0xEA000000) diff --git a/arch/arm/mach-s5pc100/include/mach/map.h b/arch/arm/mach-s5pc100/include/mach/map.h index 32e9cab5c864..328467b346aa 100644 --- a/arch/arm/mach-s5pc100/include/mach/map.h +++ b/arch/arm/mach-s5pc100/include/mach/map.h @@ -55,6 +55,8 @@ #define S5PC100_VA_VIC_OFFSET 0x10000 #define S5PC1XX_VA_VIC(x) (S5PC100_VA_VIC + ((x) * S5PC100_VA_VIC_OFFSET)) +#define S5PC100_PA_SROMC (0xE7000000) +#define S5P_PA_SROMC S5PC100_PA_SROMC #define S5PC100_PA_ONENAND (0xE7100000) diff --git a/arch/arm/mach-s5pv210/cpu.c b/arch/arm/mach-s5pv210/cpu.c index 8eb480e201b0..61e6c24b90ac 100644 --- a/arch/arm/mach-s5pv210/cpu.c +++ b/arch/arm/mach-s5pv210/cpu.c @@ -80,11 +80,6 @@ static struct map_desc s5pv210_iodesc[] __initdata = { .pfn = __phys_to_pfn(S3C_PA_UART), .length = SZ_512K, .type = MT_DEVICE, - }, { - .virtual = (unsigned long)S5P_VA_SROMC, - .pfn = __phys_to_pfn(S5PV210_PA_SROMC), - .length = SZ_4K, - .type = MT_DEVICE, }, { .virtual = (unsigned long)S5P_VA_DMC0, .pfn = __phys_to_pfn(S5PV210_PA_DMC0), diff --git a/arch/arm/mach-s5pv210/include/mach/map.h b/arch/arm/mach-s5pv210/include/mach/map.h index 861d7fe11fc9..f1ff7cb44035 100644 --- a/arch/arm/mach-s5pv210/include/mach/map.h +++ b/arch/arm/mach-s5pv210/include/mach/map.h @@ -60,6 +60,7 @@ #define S3C_VA_UARTx(x) (S3C_VA_UART + ((x) * S3C_UART_OFFSET)) #define S5PV210_PA_SROMC (0xE8000000) +#define S5P_PA_SROMC S5PV210_PA_SROMC #define S5PV210_PA_CFCON (0xE8200000) diff --git a/arch/arm/mach-s5pv310/include/mach/map.h b/arch/arm/mach-s5pv310/include/mach/map.h index 7acf4e77e92e..279723d0fc09 100644 --- a/arch/arm/mach-s5pv310/include/mach/map.h +++ b/arch/arm/mach-s5pv310/include/mach/map.h @@ -59,6 +59,7 @@ #define S5PV310_PA_HSMMC(x) (0x12510000 + ((x) * 0x10000)) #define S5PV310_PA_SROMC (0x12570000) +#define S5P_PA_SROMC S5PV310_PA_SROMC #define S5PV310_PA_UART (0x13800000) diff --git a/arch/arm/plat-s5p/cpu.c b/arch/arm/plat-s5p/cpu.c index 74f7f5a5446c..047d31c1bbd8 100644 --- a/arch/arm/plat-s5p/cpu.c +++ b/arch/arm/plat-s5p/cpu.c @@ -108,6 +108,11 @@ static struct map_desc s5p_iodesc[] __initdata = { .pfn = __phys_to_pfn(S3C_PA_WDT), .length = SZ_4K, .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S5P_VA_SROMC, + .pfn = __phys_to_pfn(S5P_PA_SROMC), + .length = SZ_4K, + .type = MT_DEVICE, }, }; -- cgit v1.2.3 From 81f9becd6a9e0f7a77e27e459e99cc74594bd205 Mon Sep 17 00:00:00 2001 From: Thomas Abraham Date: Wed, 1 Dec 2010 18:12:48 +0530 Subject: ARM: S5PV210: Add SROM controller clock This patch adds the SROM controller clock to the list of clocks to be enabled at boot time. It is required to be enabled at boot time since the modules connected over the SROM interface such as the Ethernet controller need an operational SROM. Signed-off-by: Thomas Abraham Signed-off-by: Kukjin Kim --- arch/arm/mach-s5pv210/clock.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/arch/arm/mach-s5pv210/clock.c b/arch/arm/mach-s5pv210/clock.c index 019c3a69b0e4..2f9372fb2286 100644 --- a/arch/arm/mach-s5pv210/clock.c +++ b/arch/arm/mach-s5pv210/clock.c @@ -525,6 +525,12 @@ static struct clk init_clocks[] = { .parent = &clk_pclk_psys.clk, .enable = s5pv210_clk_ip3_ctrl, .ctrlbit = (1 << 20), + }, { + .name = "sromc", + .id = -1, + .parent = &clk_hclk_psys.clk, + .enable = s5pv210_clk_ip1_ctrl, + .ctrlbit = (1 << 26), }, }; -- cgit v1.2.3 From 9b580cdb1c0294df2a2cfa845f11d65ee53e27ca Mon Sep 17 00:00:00 2001 From: Thomas Abraham Date: Thu, 2 Dec 2010 18:16:20 +0900 Subject: ARM: S5PV210: Add DM9000 support on SMDKV210 This patch adds DM9000 Ethernet Controller device support for SMDKV210. Signed-off-by: Thomas Abraham Signed-off-by: Kukjin Kim --- arch/arm/mach-s5pv210/include/mach/map.h | 2 ++ arch/arm/mach-s5pv210/mach-smdkv210.c | 57 ++++++++++++++++++++++++++++++++ 2 files changed, 59 insertions(+) diff --git a/arch/arm/mach-s5pv210/include/mach/map.h b/arch/arm/mach-s5pv210/include/mach/map.h index f1ff7cb44035..b2e0a62023ed 100644 --- a/arch/arm/mach-s5pv210/include/mach/map.h +++ b/arch/arm/mach-s5pv210/include/mach/map.h @@ -16,6 +16,8 @@ #include #include +#define S5PV210_PA_SROM_BANK5 (0xA8000000) + #define S5PC110_PA_ONENAND (0xB0000000) #define S5P_PA_ONENAND S5PC110_PA_ONENAND diff --git a/arch/arm/mach-s5pv210/mach-smdkv210.c b/arch/arm/mach-s5pv210/mach-smdkv210.c index 1fbc45b2a432..30eec118a3a4 100644 --- a/arch/arm/mach-s5pv210/mach-smdkv210.c +++ b/arch/arm/mach-s5pv210/mach-smdkv210.c @@ -14,6 +14,8 @@ #include #include #include +#include +#include #include #include @@ -24,6 +26,8 @@ #include #include +#include +#include #include #include #include @@ -102,6 +106,39 @@ static struct samsung_keypad_platdata smdkv210_keypad_data __initdata = { .cols = 8, }; +static struct resource smdkv210_dm9000_resources[] = { + [0] = { + .start = S5PV210_PA_SROM_BANK5, + .end = S5PV210_PA_SROM_BANK5, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = S5PV210_PA_SROM_BANK5 + 2, + .end = S5PV210_PA_SROM_BANK5 + 2, + .flags = IORESOURCE_MEM, + }, + [2] = { + .start = IRQ_EINT(9), + .end = IRQ_EINT(9), + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, + }, +}; + +static struct dm9000_plat_data smdkv210_dm9000_platdata = { + .flags = DM9000_PLATF_16BITONLY | DM9000_PLATF_NO_EEPROM, + .dev_addr = { 0x00, 0x09, 0xc0, 0xff, 0xec, 0x48 }, +}; + +struct platform_device smdkv210_dm9000 = { + .name = "dm9000", + .id = -1, + .num_resources = ARRAY_SIZE(smdkv210_dm9000_resources), + .resource = smdkv210_dm9000_resources, + .dev = { + .platform_data = &smdkv210_dm9000_platdata, + }, +}; + static struct platform_device *smdkv210_devices[] __initdata = { &s5pv210_device_iis0, &s5pv210_device_ac97, @@ -119,8 +156,26 @@ static struct platform_device *smdkv210_devices[] __initdata = { &s3c_device_rtc, &s3c_device_ts, &s3c_device_wdt, + &smdkv210_dm9000, }; +static void __init smdkv210_dm9000_init(void) +{ + unsigned int tmp; + + gpio_request(S5PV210_MP01(5), "nCS5"); + s3c_gpio_cfgpin(S5PV210_MP01(5), S3C_GPIO_SFN(2)); + gpio_free(S5PV210_MP01(5)); + + tmp = (5 << S5P_SROM_BCX__TACC__SHIFT); + __raw_writel(tmp, S5P_SROM_BC5); + + tmp = __raw_readl(S5P_SROM_BW); + tmp &= (S5P_SROM_BW__CS_MASK << S5P_SROM_BW__NCS5__SHIFT); + tmp |= (1 << S5P_SROM_BW__NCS5__SHIFT); + __raw_writel(tmp, S5P_SROM_BW); +} + static struct i2c_board_info smdkv210_i2c_devs0[] __initdata = { { I2C_BOARD_INFO("24c08", 0x50), }, /* Samsung S524AD0XD1 */ }; @@ -150,6 +205,8 @@ static void __init smdkv210_machine_init(void) { s3c_pm_init(); + smdkv210_dm9000_init(); + samsung_keypad_set_platdata(&smdkv210_keypad_data); s3c24xx_ts_set_platdata(&s3c_ts_platform); -- cgit v1.2.3 From 5905bbfa5b47f14c9df5c23edf1ec805ceb0d6fe Mon Sep 17 00:00:00 2001 From: Sylwester Nawrocki Date: Fri, 17 Dec 2010 15:08:00 +0900 Subject: ARM: S5PV210: Add resource definitions for MIPI CSIS Naming changed for consistency with s5pv310 where there are two instances of the device. Signed-off-by: Sylwester Nawrocki Signed-off-by: Kyungmin Park Signed-off-by: Kukjin Kim --- arch/arm/mach-s5pv210/include/mach/irqs.h | 3 ++- arch/arm/mach-s5pv210/include/mach/map.h | 3 +++ arch/arm/mach-s5pv210/include/mach/regs-clock.h | 5 +---- 3 files changed, 6 insertions(+), 5 deletions(-) diff --git a/arch/arm/mach-s5pv210/include/mach/irqs.h b/arch/arm/mach-s5pv210/include/mach/irqs.h index 119b95fdc3ce..26710b35ef87 100644 --- a/arch/arm/mach-s5pv210/include/mach/irqs.h +++ b/arch/arm/mach-s5pv210/include/mach/irqs.h @@ -65,7 +65,7 @@ #define IRQ_HSMMC0 S5P_IRQ_VIC1(26) #define IRQ_HSMMC1 S5P_IRQ_VIC1(27) #define IRQ_HSMMC2 S5P_IRQ_VIC1(28) -#define IRQ_MIPICSI S5P_IRQ_VIC1(29) +#define IRQ_MIPI_CSIS S5P_IRQ_VIC1(29) #define IRQ_MIPIDSI S5P_IRQ_VIC1(30) #define IRQ_ONENAND_AUDI S5P_IRQ_VIC1(31) @@ -132,5 +132,6 @@ #define IRQ_LCD_FIFO IRQ_LCD0 #define IRQ_LCD_VSYNC IRQ_LCD1 #define IRQ_LCD_SYSTEM IRQ_LCD2 +#define IRQ_MIPI_CSIS0 IRQ_MIPI_CSIS #endif /* ASM_ARCH_IRQS_H */ diff --git a/arch/arm/mach-s5pv210/include/mach/map.h b/arch/arm/mach-s5pv210/include/mach/map.h index b2e0a62023ed..3611492ad681 100644 --- a/arch/arm/mach-s5pv210/include/mach/map.h +++ b/arch/arm/mach-s5pv210/include/mach/map.h @@ -110,6 +110,8 @@ #define S5PV210_PA_DMC0 (0xF0000000) #define S5PV210_PA_DMC1 (0xF1400000) +#define S5PV210_PA_MIPI_CSIS 0xFA600000 + /* compatibiltiy defines. */ #define S3C_PA_UART S5PV210_PA_UART #define S3C_PA_HSMMC0 S5PV210_PA_HSMMC(0) @@ -126,6 +128,7 @@ #define S5P_PA_FIMC0 S5PV210_PA_FIMC0 #define S5P_PA_FIMC1 S5PV210_PA_FIMC1 #define S5P_PA_FIMC2 S5PV210_PA_FIMC2 +#define S5P_PA_MIPI_CSIS0 S5PV210_PA_MIPI_CSIS #define SAMSUNG_PA_ADC S5PV210_PA_ADC #define SAMSUNG_PA_CFCON S5PV210_PA_CFCON diff --git a/arch/arm/mach-s5pv210/include/mach/regs-clock.h b/arch/arm/mach-s5pv210/include/mach/regs-clock.h index ebaabe021af9..4c45b74def5f 100644 --- a/arch/arm/mach-s5pv210/include/mach/regs-clock.h +++ b/arch/arm/mach-s5pv210/include/mach/regs-clock.h @@ -161,7 +161,7 @@ #define S5P_MDNIE_SEL S5P_CLKREG(0x7008) #define S5P_MIPI_PHY_CON0 S5P_CLKREG(0x7200) #define S5P_MIPI_PHY_CON1 S5P_CLKREG(0x7204) -#define S5P_MIPI_CONTROL S5P_CLKREG(0xE814) +#define S5P_MIPI_DPHY_CONTROL S5P_CLKREG(0xE814) #define S5P_IDLE_CFG_TL_MASK (3 << 30) #define S5P_IDLE_CFG_TM_MASK (3 << 28) @@ -195,9 +195,6 @@ #define S5P_OTHERS_RET_UART (1 << 28) #define S5P_OTHERS_USB_SIG_MASK (1 << 16) -/* MIPI */ -#define S5P_MIPI_DPHY_EN (3) - /* S5P_DAC_CONTROL */ #define S5P_DAC_ENABLE (1) #define S5P_DAC_DISABLE (0) -- cgit v1.2.3 From 7db8cb2ad5042696ccc735b669ca33fa875e2d21 Mon Sep 17 00:00:00 2001 From: Sylwester Nawrocki Date: Fri, 17 Dec 2010 15:08:03 +0900 Subject: ARM: S5PV310: Add resource definitions for MIPI CSIS Add IRQ and register base address definitions for MIPI CSI slave devices. Signed-off-by: Sylwester Nawrocki Signed-off-by: Kyungmin Park Signed-off-by: Kukjin Kim --- arch/arm/mach-s5pv310/include/mach/irqs.h | 3 +++ arch/arm/mach-s5pv310/include/mach/map.h | 5 +++++ 2 files changed, 8 insertions(+) diff --git a/arch/arm/mach-s5pv310/include/mach/irqs.h b/arch/arm/mach-s5pv310/include/mach/irqs.h index 99e7dad8a85a..0a2544aaee0c 100644 --- a/arch/arm/mach-s5pv310/include/mach/irqs.h +++ b/arch/arm/mach-s5pv310/include/mach/irqs.h @@ -83,6 +83,9 @@ #define IRQ_HSMMC2 COMBINER_IRQ(29, 2) #define IRQ_HSMMC3 COMBINER_IRQ(29, 3) +#define IRQ_MIPI_CSIS0 COMBINER_IRQ(30, 0) +#define IRQ_MIPI_CSIS1 COMBINER_IRQ(30, 1) + #define IRQ_ONENAND_AUDI COMBINER_IRQ(34, 0) #define IRQ_EINT4 COMBINER_IRQ(37, 0) diff --git a/arch/arm/mach-s5pv310/include/mach/map.h b/arch/arm/mach-s5pv310/include/mach/map.h index 279723d0fc09..5eab2ecfed2a 100644 --- a/arch/arm/mach-s5pv310/include/mach/map.h +++ b/arch/arm/mach-s5pv310/include/mach/map.h @@ -56,6 +56,9 @@ #define S5PV310_PA_GPIO2 (0x11000000) #define S5PV310_PA_GPIO3 (0x03860000) +#define S5PV310_PA_MIPI_CSIS0 0x11880000 +#define S5PV310_PA_MIPI_CSIS1 0x11890000 + #define S5PV310_PA_HSMMC(x) (0x12510000 + ((x) * 0x10000)) #define S5PV310_PA_SROMC (0x12570000) @@ -96,5 +99,7 @@ #define S3C_PA_IIC7 S5PV310_PA_IIC(7) #define S3C_PA_RTC S5PV310_PA_RTC #define S3C_PA_WDT S5PV310_PA_WATCHDOG +#define S5P_PA_MIPI_CSIS0 S5PV310_PA_MIPI_CSIS0 +#define S5P_PA_MIPI_CSIS1 S5PV310_PA_MIPI_CSIS1 #endif /* __ASM_ARCH_MAP_H */ -- cgit v1.2.3 From 3bbef1b912df64a86a86e402d7686a8ed38abaf4 Mon Sep 17 00:00:00 2001 From: Sylwester Nawrocki Date: Fri, 17 Dec 2010 15:08:07 +0900 Subject: ARM: S5P: Add platform support for MIPI CSIS devices There may be up to two MIPI CSI slave interfaces depending on the SoC version. Signed-off-by: Sylwester Nawrocki Signed-off-by: Kyungmin Park Signed-off-by: Kukjin Kim --- arch/arm/plat-s5p/Kconfig | 10 +++++++++ arch/arm/plat-s5p/Makefile | 2 ++ arch/arm/plat-s5p/dev-csis0.c | 34 +++++++++++++++++++++++++++++++ arch/arm/plat-s5p/dev-csis1.c | 34 +++++++++++++++++++++++++++++++ arch/arm/plat-s5p/include/plat/csis.h | 28 +++++++++++++++++++++++++ arch/arm/plat-samsung/include/plat/devs.h | 3 +++ 6 files changed, 111 insertions(+) create mode 100644 arch/arm/plat-s5p/dev-csis0.c create mode 100644 arch/arm/plat-s5p/dev-csis1.c create mode 100644 arch/arm/plat-s5p/include/plat/csis.h diff --git a/arch/arm/plat-s5p/Kconfig b/arch/arm/plat-s5p/Kconfig index 65dbfa8e0a86..6a161f317a79 100644 --- a/arch/arm/plat-s5p/Kconfig +++ b/arch/arm/plat-s5p/Kconfig @@ -56,3 +56,13 @@ config S5P_DEV_ONENAND bool help Compile in platform device definition for OneNAND controller + +config S5P_DEV_CSIS0 + bool + help + Compile in platform device definitions for MIPI-CSIS channel 0 + +config S5P_DEV_CSIS1 + bool + help + Compile in platform device definitions for MIPI-CSIS channel 1 diff --git a/arch/arm/plat-s5p/Makefile b/arch/arm/plat-s5p/Makefile index de65238a7aef..2b7317378103 100644 --- a/arch/arm/plat-s5p/Makefile +++ b/arch/arm/plat-s5p/Makefile @@ -28,3 +28,5 @@ obj-$(CONFIG_S5P_DEV_FIMC0) += dev-fimc0.o obj-$(CONFIG_S5P_DEV_FIMC1) += dev-fimc1.o obj-$(CONFIG_S5P_DEV_FIMC2) += dev-fimc2.o obj-$(CONFIG_S5P_DEV_ONENAND) += dev-onenand.o +obj-$(CONFIG_S5P_DEV_CSIS0) += dev-csis0.o +obj-$(CONFIG_S5P_DEV_CSIS1) += dev-csis1.o diff --git a/arch/arm/plat-s5p/dev-csis0.c b/arch/arm/plat-s5p/dev-csis0.c new file mode 100644 index 000000000000..dfab1c85f54f --- /dev/null +++ b/arch/arm/plat-s5p/dev-csis0.c @@ -0,0 +1,34 @@ +/* + * Copyright (C) 2010 Samsung Electronics + * + * S5P series device definition for MIPI-CSIS channel 0 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include +#include +#include +#include + +static struct resource s5p_mipi_csis0_resource[] = { + [0] = { + .start = S5P_PA_MIPI_CSIS0, + .end = S5P_PA_MIPI_CSIS0 + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_MIPI_CSIS0, + .end = IRQ_MIPI_CSIS0, + .flags = IORESOURCE_IRQ, + } +}; + +struct platform_device s5p_device_mipi_csis0 = { + .name = "s5p-mipi-csis", + .id = 0, + .num_resources = ARRAY_SIZE(s5p_mipi_csis0_resource), + .resource = s5p_mipi_csis0_resource, +}; diff --git a/arch/arm/plat-s5p/dev-csis1.c b/arch/arm/plat-s5p/dev-csis1.c new file mode 100644 index 000000000000..e3053f27fbbf --- /dev/null +++ b/arch/arm/plat-s5p/dev-csis1.c @@ -0,0 +1,34 @@ +/* + * Copyright (C) 2010 Samsung Electronics + * + * S5P series device definition for MIPI-CSIS channel 1 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include +#include +#include +#include + +static struct resource s5p_mipi_csis1_resource[] = { + [0] = { + .start = S5P_PA_MIPI_CSIS1, + .end = S5P_PA_MIPI_CSIS1 + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_MIPI_CSIS1, + .end = IRQ_MIPI_CSIS1, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device s5p_device_mipi_csis1 = { + .name = "s5p-mipi-csis", + .id = 1, + .num_resources = ARRAY_SIZE(s5p_mipi_csis1_resource), + .resource = s5p_mipi_csis1_resource, +}; diff --git a/arch/arm/plat-s5p/include/plat/csis.h b/arch/arm/plat-s5p/include/plat/csis.h new file mode 100644 index 000000000000..51e308c7981d --- /dev/null +++ b/arch/arm/plat-s5p/include/plat/csis.h @@ -0,0 +1,28 @@ +/* + * Copyright (C) 2010 Samsung Electronics + * + * S5P series MIPI CSI slave device support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef PLAT_S5P_CSIS_H_ +#define PLAT_S5P_CSIS_H_ __FILE__ + +/** + * struct s5p_platform_mipi_csis - platform data for MIPI-CSIS + * @clk_rate: bus clock frequency + * @lanes: number of data lanes used + * @alignment: data alignment in bits + * @hs_settle: HS-RX settle time + */ +struct s5p_platform_mipi_csis { + unsigned long clk_rate; + u8 lanes; + u8 alignment; + u8 hs_settle; +}; + +#endif /* PLAT_S5P_CSIS_H_ */ diff --git a/arch/arm/plat-samsung/include/plat/devs.h b/arch/arm/plat-samsung/include/plat/devs.h index 2d82a6cb1444..7935a8bc080f 100644 --- a/arch/arm/plat-samsung/include/plat/devs.h +++ b/arch/arm/plat-samsung/include/plat/devs.h @@ -122,6 +122,9 @@ extern struct platform_device s5p_device_fimc0; extern struct platform_device s5p_device_fimc1; extern struct platform_device s5p_device_fimc2; +extern struct platform_device s5p_device_mipi_csis0; +extern struct platform_device s5p_device_mipi_csis1; + /* s3c2440 specific devices */ #ifdef CONFIG_CPU_S3C2440 -- cgit v1.2.3