From 7e6213f4345c3798b7fb7af41d221e2fd77ec6a6 Mon Sep 17 00:00:00 2001 From: Paul Kocialkowski Date: Fri, 5 Feb 2016 19:42:19 +0100 Subject: regulator: lp872x: Add enable GPIO pin support LP872x regulators are made active via the EN pin, which might be hooked to a GPIO. This adds support for driving the GPIO high when the driver is in use. Signed-off-by: Paul Kocialkowski Signed-off-by: Mark Brown --- .../devicetree/bindings/regulator/lp872x.txt | 1 + drivers/regulator/lp872x.c | 34 ++++++++++++++++++++++ include/linux/regulator/lp872x.h | 5 ++++ 3 files changed, 40 insertions(+) diff --git a/Documentation/devicetree/bindings/regulator/lp872x.txt b/Documentation/devicetree/bindings/regulator/lp872x.txt index 78183182dad9..ca58a68ffdf1 100644 --- a/Documentation/devicetree/bindings/regulator/lp872x.txt +++ b/Documentation/devicetree/bindings/regulator/lp872x.txt @@ -28,6 +28,7 @@ Optional properties: - ti,dvs-gpio: GPIO specifier for external DVS pin control of LP872x devices. - ti,dvs-vsel: DVS selector. 0 = SEL_V1, 1 = SEL_V2. - ti,dvs-state: initial DVS pin state. 0 = DVS_LOW, 1 = DVS_HIGH. + - enable-gpios: GPIO specifier for EN pin control of LP872x devices. Sub nodes for regulator_init_data LP8720 has maximum 6 nodes. (child name: ldo1 ~ 5 and buck) diff --git a/drivers/regulator/lp872x.c b/drivers/regulator/lp872x.c index 21c49d871aba..38992112fd6e 100644 --- a/drivers/regulator/lp872x.c +++ b/drivers/regulator/lp872x.c @@ -15,6 +15,7 @@ #include #include #include +#include #include #include #include @@ -757,6 +758,33 @@ set_default_dvs_mode: default_dvs_mode[lp->chipid]); } +static int lp872x_hw_enable(struct lp872x *lp) +{ + int ret, gpio; + + if (!lp->pdata) + return -EINVAL; + + gpio = lp->pdata->enable_gpio; + if (!gpio_is_valid(gpio)) + return 0; + + /* Always set enable GPIO high. */ + ret = devm_gpio_request_one(lp->dev, gpio, GPIOF_OUT_INIT_HIGH, "LP872X EN"); + if (ret) { + dev_err(lp->dev, "gpio request err: %d\n", ret); + return ret; + } + + /* Each chip has a different enable delay. */ + if (lp->chipid == LP8720) + usleep_range(LP8720_ENABLE_DELAY, 1.5 * LP8720_ENABLE_DELAY); + else + usleep_range(LP8725_ENABLE_DELAY, 1.5 * LP8725_ENABLE_DELAY); + + return 0; +} + static int lp872x_config(struct lp872x *lp) { struct lp872x_platform_data *pdata = lp->pdata; @@ -875,6 +903,8 @@ static struct lp872x_platform_data of_property_read_u8(np, "ti,dvs-state", &dvs_state); pdata->dvs->init_state = dvs_state ? DVS_HIGH : DVS_LOW; + pdata->enable_gpio = of_get_named_gpio(np, "enable-gpios", 0); + if (of_get_child_count(np) == 0) goto out; @@ -948,6 +978,10 @@ static int lp872x_probe(struct i2c_client *cl, const struct i2c_device_id *id) lp->chipid = id->driver_data; i2c_set_clientdata(cl, lp); + ret = lp872x_hw_enable(lp); + if (ret) + return ret; + ret = lp872x_config(lp); if (ret) return ret; diff --git a/include/linux/regulator/lp872x.h b/include/linux/regulator/lp872x.h index 132e05c46661..6029279f4eed 100644 --- a/include/linux/regulator/lp872x.h +++ b/include/linux/regulator/lp872x.h @@ -18,6 +18,9 @@ #define LP872X_MAX_REGULATORS 9 +#define LP8720_ENABLE_DELAY 200 +#define LP8725_ENABLE_DELAY 30000 + enum lp872x_regulator_id { LP8720_ID_BASE, LP8720_ID_LDO1 = LP8720_ID_BASE, @@ -79,12 +82,14 @@ struct lp872x_regulator_data { * @update_config : if LP872X_GENERAL_CFG register is updated, set true * @regulator_data : platform regulator id and init data * @dvs : dvs data for buck voltage control + * @enable_gpio : gpio pin number for enable control */ struct lp872x_platform_data { u8 general_config; bool update_config; struct lp872x_regulator_data regulator_data[LP872X_MAX_REGULATORS]; struct lp872x_dvs *dvs; + int enable_gpio; }; #endif -- cgit v1.2.3