From 89a99e76f6888166edb145f576cc4a761ee0e0a9 Mon Sep 17 00:00:00 2001 From: Vipin Bhandari Date: Thu, 30 Jul 2009 04:19:17 -0400 Subject: mfd: Correct ro and cd implemantion on DM355 This patch corrects the support for MMCSD card detection and read only feature for SoC DM355. EVMDM355_ECP_VA4.pdf, from Spectrum digital, suggests that Bit 2 and 4 should be checked for card detection. However on the EVM, bits 1 and 3 gives this status, for MMC/SD instance 0 and 1 respectively. The pdf also suggests that Bit 1 and 3 should be checked for write protection. However on the EVM bits 2 and 4 gives this status. This document can be downloaded from http://c6000.spectrumdigital.com/evmdm355/reve/files/EVMDM355_ECP_VA4.pdf Signed-off-by: Vipin Bhandari Acked-by: David Brownell Signed-off-by: Kevin Hilman Signed-off-by: Samuel Ortiz --- drivers/mfd/dm355evm_msp.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) diff --git a/drivers/mfd/dm355evm_msp.c b/drivers/mfd/dm355evm_msp.c index 5b6e58a3ba46..3d4a861976ca 100644 --- a/drivers/mfd/dm355evm_msp.c +++ b/drivers/mfd/dm355evm_msp.c @@ -107,8 +107,16 @@ static const u8 msp_gpios[] = { MSP_GPIO(2, SWITCH1), MSP_GPIO(3, SWITCH1), MSP_GPIO(4, SWITCH1), /* switches on MMC/SD sockets */ - MSP_GPIO(1, SDMMC), MSP_GPIO(2, SDMMC), /* mmc0 WP, nCD */ - MSP_GPIO(3, SDMMC), MSP_GPIO(4, SDMMC), /* mmc1 WP, nCD */ + /* + * Note: EVMDM355_ECP_VA4.pdf suggests that Bit 2 and 4 should be + * checked for card detection. However on the EVM bit 1 and 3 gives + * this status, for 0 and 1 instance respectively. The pdf also + * suggests that Bit 1 and 3 should be checked for write protection. + * However on the EVM bit 2 and 4 gives this status,for 0 and 1 + * instance respectively. + */ + MSP_GPIO(2, SDMMC), MSP_GPIO(1, SDMMC), /* mmc0 WP, nCD */ + MSP_GPIO(4, SDMMC), MSP_GPIO(3, SDMMC), /* mmc1 WP, nCD */ }; #define MSP_GPIO_REG(offset) (msp_gpios[(offset)] >> 3) -- cgit v1.2.3