From dc098551918093901d8ac8936e9d1a1b891b56ed Mon Sep 17 00:00:00 2001 From: Jack Steiner Date: Fri, 17 Apr 2009 09:22:42 -0500 Subject: x86/uv: fix init of memory-less nodes Add support for nodes that have cpus but no memory. The current code was failing to add these nodes to the nodes_present_map. v2: Fixes case caught by David Rientjes - missed support for the x2apic SRAT table. [ Impact: fix potential boot crash on memory-less UV nodes. ] Reported-by: David Rientjes Signed-off-by: Jack Steiner LKML-Reference: <20090417142242.GA23743@sgi.com> Signed-off-by: Ingo Molnar --- arch/x86/mm/srat_64.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/arch/x86/mm/srat_64.c b/arch/x86/mm/srat_64.c index c7d272b8574c..33c5fa57e43d 100644 --- a/arch/x86/mm/srat_64.c +++ b/arch/x86/mm/srat_64.c @@ -28,6 +28,7 @@ int acpi_numa __initdata; static struct acpi_table_slit *acpi_slit; static nodemask_t nodes_parsed __initdata; +static nodemask_t cpu_nodes_parsed __initdata; static struct bootnode nodes[MAX_NUMNODES] __initdata; static struct bootnode nodes_add[MAX_NUMNODES]; static int found_add_area __initdata; @@ -141,6 +142,7 @@ acpi_numa_x2apic_affinity_init(struct acpi_srat_x2apic_cpu_affinity *pa) apic_id = pa->apic_id; apicid_to_node[apic_id] = node; + node_set(node, cpu_nodes_parsed); acpi_numa = 1; printk(KERN_INFO "SRAT: PXM %u -> APIC %u -> Node %u\n", pxm, apic_id, node); @@ -174,6 +176,7 @@ acpi_numa_processor_affinity_init(struct acpi_srat_cpu_affinity *pa) else apic_id = pa->apic_id; apicid_to_node[apic_id] = node; + node_set(node, cpu_nodes_parsed); acpi_numa = 1; printk(KERN_INFO "SRAT: PXM %u -> APIC %u -> Node %u\n", pxm, apic_id, node); @@ -402,7 +405,8 @@ int __init acpi_scan_nodes(unsigned long start, unsigned long end) return -1; } - node_possible_map = nodes_parsed; + /* Account for nodes with cpus and no memory */ + nodes_or(node_possible_map, nodes_parsed, cpu_nodes_parsed); /* Finally register nodes */ for_each_node_mask(i, node_possible_map) -- cgit v1.2.3 From 27229ca63269c1be0a710f074fa9de4024f283f1 Mon Sep 17 00:00:00 2001 From: Jack Steiner Date: Fri, 17 Apr 2009 09:24:47 -0500 Subject: x86/uv: fix init of cpu-less nodes Fix an endcase in the UV initialization code for the "UV large system mode" of apicids. If node zero contains no cpus, cpus on another node will be the boot cpu. The percpu data that contains the extra apicid bits was not being initialized early enough. [ Impact: fix potential boot crash on cpu-less UV nodes ] Signed-off-by: Jack Steiner LKML-Reference: <20090417142447.GA23759@sgi.com> Signed-off-by: Ingo Molnar --- arch/x86/kernel/apic/x2apic_uv_x.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/arch/x86/kernel/apic/x2apic_uv_x.c b/arch/x86/kernel/apic/x2apic_uv_x.c index 1248318436e8..49d2f5c739b7 100644 --- a/arch/x86/kernel/apic/x2apic_uv_x.c +++ b/arch/x86/kernel/apic/x2apic_uv_x.c @@ -19,6 +19,7 @@ #include #include #include +#include #include #include @@ -34,6 +35,17 @@ DEFINE_PER_CPU(int, x2apic_extra_bits); static enum uv_system_type uv_system_type; +static int early_get_nodeid(void) +{ + union uvh_node_id_u node_id; + unsigned long *mmr; + + mmr = early_ioremap(UV_LOCAL_MMR_BASE | UVH_NODE_ID, sizeof(*mmr)); + node_id.v = *mmr; + early_iounmap(mmr, sizeof(*mmr)); + return node_id.s.node_id; +} + static int uv_acpi_madt_oem_check(char *oem_id, char *oem_table_id) { if (!strcmp(oem_id, "SGI")) { @@ -42,6 +54,8 @@ static int uv_acpi_madt_oem_check(char *oem_id, char *oem_table_id) else if (!strcmp(oem_table_id, "UVX")) uv_system_type = UV_X2APIC; else if (!strcmp(oem_table_id, "UVH")) { + __get_cpu_var(x2apic_extra_bits) = + early_get_nodeid() << (UV_APIC_PNODE_SHIFT - 1); uv_system_type = UV_NON_UNIQUE_APIC; return 1; } -- cgit v1.2.3 From 1648e4f805063137b55b869666e936ffd4419cdf Mon Sep 17 00:00:00 2001 From: "H. Peter Anvin" Date: Fri, 17 Apr 2009 10:46:37 -0700 Subject: x86, kbuild: make "make install" not depend on vmlinux It is common to use "make install" in restricted environments which differ from the one which was actually used to build the kernel. In such environments it is highly undesirable to trigger a rebuild of any part of the system. Worse, the rebuild may be spurious, triggered by differences in the environment. Signed-off-by: H. Peter Anvin Cc: Sam Ravnborg LKML-Reference: <20090415234642.GA28531@uranus.ravnborg.org> --- arch/x86/Makefile | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/arch/x86/Makefile b/arch/x86/Makefile index f05d8c91d9e5..8c86b72afdc2 100644 --- a/arch/x86/Makefile +++ b/arch/x86/Makefile @@ -153,7 +153,7 @@ endif boot := arch/x86/boot -BOOT_TARGETS = bzlilo bzdisk fdimage fdimage144 fdimage288 isoimage install +BOOT_TARGETS = bzlilo bzdisk fdimage fdimage144 fdimage288 isoimage PHONY += bzImage $(BOOT_TARGETS) @@ -171,6 +171,10 @@ bzImage: vmlinux $(BOOT_TARGETS): vmlinux $(Q)$(MAKE) $(build)=$(boot) $@ +PHONY += install +install: + $(Q)$(MAKE) $(build)=$(boot) $@ + PHONY += vdso_install vdso_install: $(Q)$(MAKE) $(build)=arch/x86/vdso $@ -- cgit v1.2.3 From a81b6314e0aa480b8ac6dd02779d44cd0bee0a34 Mon Sep 17 00:00:00 2001 From: Jaswinder Singh Rajput Date: Fri, 17 Apr 2009 23:31:20 +0530 Subject: x86: mm/numa_32.c calculate_numa_remap_pages should use __init calculate_numa_remap_pages() is called only by __init initmem_init() further calculate_numa_remap_pages is calling: __init find_e820_area() and __init reserve_early() So calculate_numa_remap_pages() should be __init calculate_numa_remap_pages(). WARNING: arch/x86/built-in.o(.text+0x82ea3): Section mismatch in reference from the function calculate_numa_remap_pages() to the function .init.text:find_e820_area() The function calculate_numa_remap_pages() references the function __init find_e820_area(). This is often because calculate_numa_remap_pages lacks a __init annotation or the annotation of find_e820_area is wrong. WARNING: arch/x86/built-in.o(.text+0x82f5f): Section mismatch in reference from the function calculate_numa_remap_pages() to the function .init.text:reserve_early() The function calculate_numa_remap_pages() references the function __init reserve_early(). This is often because calculate_numa_remap_pages lacks a __init annotation or the annotation of reserve_early is wrong. [ Impact: save memory, address Section mismatch warning ] Signed-off-by: Jaswinder Singh Rajput Cc: Sam Ravnborg LKML-Reference: <1239991281.3153.4.camel@ht.satnam> Signed-off-by: Ingo Molnar --- arch/x86/mm/numa_32.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/mm/numa_32.c b/arch/x86/mm/numa_32.c index 3daefa04ace5..d2530062fe00 100644 --- a/arch/x86/mm/numa_32.c +++ b/arch/x86/mm/numa_32.c @@ -257,7 +257,7 @@ void resume_map_numa_kva(pgd_t *pgd_base) } #endif -static unsigned long calculate_numa_remap_pages(void) +static __init unsigned long calculate_numa_remap_pages(void) { int nid; unsigned long size, reserve_pages = 0; -- cgit v1.2.3 From 8b5b94e4e9813cdd77103827f48d58c806ab45c6 Mon Sep 17 00:00:00 2001 From: Weidong Han Date: Fri, 17 Apr 2009 16:42:12 +0800 Subject: docs, x86: add nox2apic back to kernel-parameters.txt "nox2apic" was removed from kernel-parameters.txt by mistake, when entries were sorted in alpha order (commit 0cb55ad2). But this early parameter is still there, add it back to kernel-parameters.txt. [ Impact: add boot parameter description ] Signed-off-by: Suresh Siddha Signed-off-by: Weidong Han Cc: Randy Dunlap Cc: iommu@lists.linux-foundation.org Cc: dwmw2@infradead.org Cc: allen.m.kay@intel.com Cc: fenghua.yu@intel.com LKML-Reference: <1239957736-6161-2-git-send-email-weidong.han@intel.com> Signed-off-by: Ingo Molnar --- Documentation/kernel-parameters.txt | 2 ++ 1 file changed, 2 insertions(+) diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index a19f021f081a..9e4fe724c87c 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -1588,6 +1588,8 @@ and is between 256 and 4096 characters. It is defined in the file nowb [ARM] + nox2apic [X86-64,APIC] Do not enable x2APIC mode. + nptcg= [IA64] Override max number of concurrent global TLB purges which is reported from either PAL_VM_SUMMARY or SAL PALO. -- cgit v1.2.3 From fc61e6636d13eb3a23eb29b4327eeee9de0ef3bc Mon Sep 17 00:00:00 2001 From: Jack Steiner Date: Mon, 20 Apr 2009 08:25:31 -0500 Subject: x86/uv: fix for no memory at paddr 0 Fix endcase where the memory at physical address 0 does not really exist AND one of the sockets on blade 0 has no active cpus. The memory that _appears_ to be at physical address 0 is actually memory that located at a different address but has been remapped by the chipset so that it appears to be at physical address 0. When determining the UV pnode, the algorithm for determining the pnode incorrectly used the relocated physical address instead of the actual (global) address. [ Impact: boot failure on partitioned systems ] Signed-off-by: Jack Steiner LKML-Reference: <20090420132530.GA23156@sgi.com> Signed-off-by: Ingo Molnar --- arch/x86/kernel/apic/x2apic_uv_x.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/x86/kernel/apic/x2apic_uv_x.c b/arch/x86/kernel/apic/x2apic_uv_x.c index d6712334ce4b..2bda69352976 100644 --- a/arch/x86/kernel/apic/x2apic_uv_x.c +++ b/arch/x86/kernel/apic/x2apic_uv_x.c @@ -652,6 +652,7 @@ void __init uv_system_init(void) if (uv_node_to_blade[nid] >= 0) continue; paddr = node_start_pfn(nid) << PAGE_SHIFT; + paddr = uv_soc_phys_ram_to_gpa(paddr); pnode = (paddr >> m_val) & pnode_mask; blade = boot_pnode_to_blade(pnode); uv_node_to_blade[nid] = blade; -- cgit v1.2.3 From 06c38d5e36b12d040839ff224e805146c0368556 Mon Sep 17 00:00:00 2001 From: Suresh Siddha Date: Thu, 9 Apr 2009 15:24:34 -0700 Subject: x86-64: fix FPU corruption with signals and preemption In 64bit signal delivery path, clear_used_math() was happening before saving the current active FPU state on to the user stack for signal handling. Between clear_used_math() and the state store on to the user stack, potentially we can get a page fault for the user address and can block. Infact, while testing we were hitting the might_fault() in __clear_user() which can do a schedule(). At a later point in time, we will schedule back into this process and resume the save state (using "xsave/fxsave" instruction) which can lead to DNA fault. And as used_math was cleared before, we will reinit the FP state in the DNA fault and continue. This reinit will result in loosing the FPU state of the process. Move clear_used_math() to a point after the FPU state has been stored onto the user stack. This issue is present from a long time (even before the xsave changes and the x86 merge). But it can easily be exposed in 2.6.28.x and 2.6.29.x series because of the __clear_user() in this path, which has an explicit __cond_resched() leading to a context switch with CONFIG_PREEMPT_VOLUNTARY. [ Impact: fix FPU state corruption ] Signed-off-by: Suresh Siddha Cc: [2.6.28.x, 2.6.29.x] Signed-off-by: H. Peter Anvin --- arch/x86/kernel/xsave.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/arch/x86/kernel/xsave.c b/arch/x86/kernel/xsave.c index 0a5b04aa98f1..c5ee17e8c6d9 100644 --- a/arch/x86/kernel/xsave.c +++ b/arch/x86/kernel/xsave.c @@ -89,7 +89,7 @@ int save_i387_xstate(void __user *buf) if (!used_math()) return 0; - clear_used_math(); /* trigger finit */ + if (task_thread_info(tsk)->status & TS_USEDFPU) { /* * Start with clearing the user buffer. This will present a @@ -114,6 +114,8 @@ int save_i387_xstate(void __user *buf) return -1; } + clear_used_math(); /* trigger finit */ + if (task_thread_info(tsk)->status & TS_XSAVE) { struct _fpstate __user *fx = buf; struct _xstate __user *x = buf; -- cgit v1.2.3 From 2f537a9f8e82f55c241b002c8cfbf34303b45ada Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Tue, 21 Apr 2009 16:00:15 +0930 Subject: x86: fix boot crash in NMI watchdog with CONFIG_CPUMASK_OFFSTACK=y and flat APIC fcef8576d8a64fc603e719c97d423f9f6d4e0e8b converted backtrace_mask to a cpumask_var_t, and assumed check_nmi_watchdog was called before nmi_watchdog_tick was ever called. Steven's oops shows I was wrong. This is something of a bandaid: I'm not sure we *should* be calling nmi_watchdog_tick before check_nmi_watchdog. Note that gcc eliminates this test for the CONFIG_CPUMASK_OFFSTACK=n case. [ Impact: fix boot crash in rare configs ] Reported-by: Steven Rostedt Signed-off-by: Rusty Russell LKML-Reference: Signed-off-by: Ingo Molnar --- arch/x86/kernel/apic/nmi.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/x86/kernel/apic/nmi.c b/arch/x86/kernel/apic/nmi.c index d6bd62407152..2ba52f35a88c 100644 --- a/arch/x86/kernel/apic/nmi.c +++ b/arch/x86/kernel/apic/nmi.c @@ -414,7 +414,8 @@ nmi_watchdog_tick(struct pt_regs *regs, unsigned reason) touched = 1; } - if (cpumask_test_cpu(cpu, backtrace_mask)) { + /* We can be called before check_nmi_watchdog, hence NULL check. */ + if (backtrace_mask != NULL && cpumask_test_cpu(cpu, backtrace_mask)) { static DEFINE_SPINLOCK(lock); /* Serialise the printks */ spin_lock(&lock); -- cgit v1.2.3 From fcc5c4a2feea3886dc058498b28508b2731720d5 Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Tue, 21 Apr 2009 16:03:41 +0930 Subject: x86: avoid theoretical spurious NMI backtraces with CONFIG_CPUMASK_OFFSTACK=y In theory (though not shown in practice) alloc_cpumask_var() doesn't zero memory, so CPUs might print an "NMI backtrace for cpu %d" once on boot. (Bug introduced in fcef8576d8a64fc603e719c97d423f9f6d4e0e8b). [ Impact: avoid theoretical syslog noise in rare configs ] Signed-off-by: Rusty Russell Cc: Steven Rostedt LKML-Reference: Signed-off-by: Ingo Molnar --- arch/x86/kernel/apic/nmi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kernel/apic/nmi.c b/arch/x86/kernel/apic/nmi.c index 2ba52f35a88c..ce4fbfa315a1 100644 --- a/arch/x86/kernel/apic/nmi.c +++ b/arch/x86/kernel/apic/nmi.c @@ -138,7 +138,7 @@ int __init check_nmi_watchdog(void) if (!prev_nmi_count) goto error; - alloc_cpumask_var(&backtrace_mask, GFP_KERNEL); + alloc_cpumask_var(&backtrace_mask, GFP_KERNEL|__GFP_ZERO); printk(KERN_INFO "Testing NMI watchdog ... "); #ifdef CONFIG_SMP -- cgit v1.2.3 From 2a3313f494c2f3f74a27d66f0f14b38558b7dba2 Mon Sep 17 00:00:00 2001 From: "Michael K. Johnson" Date: Tue, 21 Apr 2009 21:44:48 -0400 Subject: x86: more than 8 32-bit CPUs requires X86_BIGSMP $ cat x86-more-than-8-cpus-requires-bigsmp.patch Enforce NR_CPUS <= 8 limitation if X86_BIGSMP not set Configuring more than 8 logical CPUs on 32-bit x86 requires X86_BIGSMP to be set in order to boot successfully, if more than 8 logical CPUs are actually found at boot time. The X86_BIGSMP help text describes that it is required to be set if more than 8 CPUs are configured, but this was previously not enforced. This configuration error has affected multiple distributions: https://bugzilla.redhat.com/show_bug.cgi?id=480844 https://issues.rpath.com/browse/RPL-3022 Signed-off-by: Michael K Johnson LKML-Reference: <20090422014448.GB32541@logo.rdu.rpath.com> Signed-off-by: H. Peter Anvin --- arch/x86/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index c9086e6307a5..b5cda6c03d1d 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -664,6 +664,7 @@ config MAXSMP config NR_CPUS int "Maximum number of CPUs" if SMP && !MAXSMP + range 2 8 if SMP && X86_32 && !X86_BIGSMP range 2 512 if SMP && !MAXSMP default "1" if !SMP default "4096" if MAXSMP -- cgit v1.2.3 From 7a6f9cbb37120c745fc187083fb5c3de4dca4f97 Mon Sep 17 00:00:00 2001 From: Andreas Herrmann Date: Tue, 21 Apr 2009 20:00:37 +0200 Subject: x86: hpet: fix periodic mode programming on AMD 81xx (See http://bugzilla.kernel.org/show_bug.cgi?id=12961) It partially reverts commit c23e253e67c9d8a91a0ffa33c1f571a17f0a2403 (x86: hpet: stop HPET_COUNTER when programming periodic mode) HPET on AMD 81xx chipset needs a second write (with HPET_TN_SETVAL cleared) to T0_CMP register to set the period in periodic mode. With this patch HPET_COUNTER is still stopped but not reset when HPET is programmed in periodic mode. This should help to avoid races when HPET is programmed in periodic mode and fixes a boot time hang that I've observed on a machine when using 1000HZ. [ Impact: fix boot time hang on machines with AMD 81xx chipset ] Reported-by: Jeff Mahoney Signed-off-by: Andreas Herrmann Tested-by: Jeff Mahoney LKML-Reference: <20090421180037.GA2763@alberich.amd.com> Signed-off-by: Ingo Molnar --- arch/x86/kernel/hpet.c | 18 +++++++++++++++++- 1 file changed, 17 insertions(+), 1 deletion(-) diff --git a/arch/x86/kernel/hpet.c b/arch/x86/kernel/hpet.c index 3f0019e0a229..81408b93f887 100644 --- a/arch/x86/kernel/hpet.c +++ b/arch/x86/kernel/hpet.c @@ -236,6 +236,10 @@ static void hpet_stop_counter(void) unsigned long cfg = hpet_readl(HPET_CFG); cfg &= ~HPET_CFG_ENABLE; hpet_writel(cfg, HPET_CFG); +} + +static void hpet_reset_counter(void) +{ hpet_writel(0, HPET_COUNTER); hpet_writel(0, HPET_COUNTER + 4); } @@ -250,6 +254,7 @@ static void hpet_start_counter(void) static void hpet_restart_counter(void) { hpet_stop_counter(); + hpet_reset_counter(); hpet_start_counter(); } @@ -309,7 +314,7 @@ static int hpet_setup_msi_irq(unsigned int irq); static void hpet_set_mode(enum clock_event_mode mode, struct clock_event_device *evt, int timer) { - unsigned long cfg; + unsigned long cfg, cmp, now; uint64_t delta; switch (mode) { @@ -317,12 +322,23 @@ static void hpet_set_mode(enum clock_event_mode mode, hpet_stop_counter(); delta = ((uint64_t)(NSEC_PER_SEC/HZ)) * evt->mult; delta >>= evt->shift; + now = hpet_readl(HPET_COUNTER); + cmp = now + (unsigned long) delta; cfg = hpet_readl(HPET_Tn_CFG(timer)); /* Make sure we use edge triggered interrupts */ cfg &= ~HPET_TN_LEVEL; cfg |= HPET_TN_ENABLE | HPET_TN_PERIODIC | HPET_TN_SETVAL | HPET_TN_32BIT; hpet_writel(cfg, HPET_Tn_CFG(timer)); + hpet_writel(cmp, HPET_Tn_CMP(timer)); + udelay(1); + /* + * HPET on AMD 81xx needs a second write (with HPET_TN_SETVAL + * cleared) to T0_CMP to set the period. The HPET_TN_SETVAL + * bit is automatically cleared after the first write. + * (See AMD-8111 HyperTransport I/O Hub Data Sheet, + * Publication # 24674) + */ hpet_writel((unsigned long) delta, HPET_Tn_CMP(timer)); hpet_start_counter(); hpet_print_config(); -- cgit v1.2.3 From c5428e950ad42640f00092949fd17e356dfdeafa Mon Sep 17 00:00:00 2001 From: Coly Li Date: Wed, 22 Apr 2009 23:21:56 +0800 Subject: uv_time: add parameter to uv_read_rtc() uv_read_rtc() is referenced by read member of struct clocksource clocksource_uv. In include/linux/clocksource.h, read of struct clocksource is declared as: cycle_t (*read)(struct clocksource *cs) This got introduced recently in: 8e19608: clocksource: pass clocksource to read() callback But arch/x86/kernel/uv_time.c was not properly converted by that pach. This patch adds a dummy parameter (struct clocksource type) to uv_read_rtc() to fix the incompatible reference in clocksource_uv, and add a NULL parameter in all places where uv_read_rtc() gets called. [ Impact: cleanup, address compiler warning ] Signed-off-by: Coly Li Cc: Dimitri Sivanich Cc: Magnus Damm Cc: Andrew Morton Cc: Hugh Dickins LKML-Reference: <49EF3614.1050806@suse.de> Signed-off-by: Ingo Molnar Cc: Dimitri Sivanich --- arch/x86/kernel/uv_time.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/arch/x86/kernel/uv_time.c b/arch/x86/kernel/uv_time.c index 2ffb6c53326e..583f11d5c480 100644 --- a/arch/x86/kernel/uv_time.c +++ b/arch/x86/kernel/uv_time.c @@ -29,7 +29,7 @@ #define RTC_NAME "sgi_rtc" -static cycle_t uv_read_rtc(void); +static cycle_t uv_read_rtc(struct clocksource *cs); static int uv_rtc_next_event(unsigned long, struct clock_event_device *); static void uv_rtc_timer_setup(enum clock_event_mode, struct clock_event_device *); @@ -123,7 +123,7 @@ static int uv_setup_intr(int cpu, u64 expires) /* Initialize comparator value */ uv_write_global_mmr64(pnode, UVH_INT_CMPB, expires); - return (expires < uv_read_rtc() && !uv_intr_pending(pnode)); + return (expires < uv_read_rtc(NULL) && !uv_intr_pending(pnode)); } /* @@ -256,7 +256,7 @@ static int uv_rtc_unset_timer(int cpu) spin_lock_irqsave(&head->lock, flags); - if (head->next_cpu == bcpu && uv_read_rtc() >= *t) + if (head->next_cpu == bcpu && uv_read_rtc(NULL) >= *t) rc = 1; *t = ULLONG_MAX; @@ -278,7 +278,7 @@ static int uv_rtc_unset_timer(int cpu) /* * Read the RTC. */ -static cycle_t uv_read_rtc(void) +static cycle_t uv_read_rtc(struct clocksource *cs) { return (cycle_t)uv_read_local_mmr(UVH_RTC); } @@ -291,7 +291,7 @@ static int uv_rtc_next_event(unsigned long delta, { int ced_cpu = cpumask_first(ced->cpumask); - return uv_rtc_set_timer(ced_cpu, delta + uv_read_rtc()); + return uv_rtc_set_timer(ced_cpu, delta + uv_read_rtc(NULL)); } /* -- cgit v1.2.3 From 4c31e92b97b6d7e7b19ee5e54a22571ffdebb305 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Wed, 22 Apr 2009 14:19:27 -0700 Subject: x86: check boundary in setup_node_bootmem() Commit dc09855 ("x86/uv: fix init of memory-less nodes") causes a two sockets system (where node-1 doesn't have RAM installed) to crash. That commit makes node_possible include cpu nodes that do not have memory. So check boundary in setup_node_bootmem(). [ Impact: fix boot crash on RAM-less NUMA node system ] Signed-off-by: Yinghai Lu Cc: Jack Steiner LKML-Reference: <49EF89DF.9090404@kernel.org> Signed-off-by: Ingo Molnar --- arch/x86/mm/numa_64.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/x86/mm/numa_64.c b/arch/x86/mm/numa_64.c index d73aaa892371..2d05a12029dc 100644 --- a/arch/x86/mm/numa_64.c +++ b/arch/x86/mm/numa_64.c @@ -188,6 +188,9 @@ void __init setup_node_bootmem(int nodeid, unsigned long start, const int pgdat_size = roundup(sizeof(pg_data_t), PAGE_SIZE); int nid; + if (!end) + return; + start = roundup(start, ZONE_ALIGN); printk(KERN_INFO "Bootmem setup node %d %016lx-%016lx\n", nodeid, -- cgit v1.2.3 From d2c8604121648b744ebb127991f1c5876931885e Mon Sep 17 00:00:00 2001 From: Len Brown Date: Thu, 23 Apr 2009 19:19:42 -0400 Subject: x86, hpet: Stop soliciting hpet=force users on ICH4M The HPET in the ICH4M is not documented in the data sheet because it was not officially validated. While it is fine for hackers to continue to use "hpet=force" to enable the hardware that they have, it is not prudent to solicit additional "hpet=force" users on this hardware. [ Impact: remove hpet=force syslog message on old-ICH systems ] Signed-off-by: Len Brown Acked-by: Venkatesh Pallipadi LKML-Reference: Signed-off-by: Ingo Molnar --- arch/x86/kernel/quirks.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/arch/x86/kernel/quirks.c b/arch/x86/kernel/quirks.c index e95022e4f5d5..7563b31b4f03 100644 --- a/arch/x86/kernel/quirks.c +++ b/arch/x86/kernel/quirks.c @@ -261,8 +261,6 @@ static void old_ich_force_enable_hpet_user(struct pci_dev *dev) { if (hpet_force_user) old_ich_force_enable_hpet(dev); - else - hpet_print_force_info(); } DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_1, -- cgit v1.2.3