From eb35279dd7c7834d6320edf24e1b9786d31e4899 Mon Sep 17 00:00:00 2001 From: Matt Ranostay Date: Wed, 24 May 2017 22:52:29 -0700 Subject: iio: proximity: as3935: noise detection + threshold changes Most applications are too noisy to allow the default noise and watchdog settings, and thus need to be configurable via DT properties. Also default settings to POR defaults on a reset, and register distuber interrupts as noise since it prevents proper usage. Cc: devicetree@vger.kernel.org Signed-off-by: Matt Ranostay Acked-by: Rob Herring Signed-off-by: Jonathan Cameron --- .../ABI/testing/sysfs-bus-iio-proximity-as3935 | 8 ++++ .../devicetree/bindings/iio/proximity/as3935.txt | 5 +++ drivers/iio/proximity/as3935.c | 43 ++++++++++++++++++++-- 3 files changed, 53 insertions(+), 3 deletions(-) diff --git a/Documentation/ABI/testing/sysfs-bus-iio-proximity-as3935 b/Documentation/ABI/testing/sysfs-bus-iio-proximity-as3935 index 33e96f740639..147d4e8a1403 100644 --- a/Documentation/ABI/testing/sysfs-bus-iio-proximity-as3935 +++ b/Documentation/ABI/testing/sysfs-bus-iio-proximity-as3935 @@ -14,3 +14,11 @@ Description: Show or set the gain boost of the amp, from 0-31 range. 18 = indoors (default) 14 = outdoors + +What /sys/bus/iio/devices/iio:deviceX/noise_level_tripped +Date: May 2017 +KernelVersion: 4.13 +Contact: Matt Ranostay +Description: + When 1 the noise level is over the trip level and not reporting + valid data diff --git a/Documentation/devicetree/bindings/iio/proximity/as3935.txt b/Documentation/devicetree/bindings/iio/proximity/as3935.txt index 38d74314b7ab..b6c1afa6f02d 100644 --- a/Documentation/devicetree/bindings/iio/proximity/as3935.txt +++ b/Documentation/devicetree/bindings/iio/proximity/as3935.txt @@ -16,6 +16,10 @@ Optional properties: - ams,tuning-capacitor-pf: Calibration tuning capacitor stepping value 0 - 120pF. This will require using the calibration data from the manufacturer. + - ams,nflwdth: Set the noise and watchdog threshold register on + startup. This will need to set according to the noise from the + MCU board, and possibly the local environment. Refer to the + datasheet for the threshold settings. Example: @@ -27,4 +31,5 @@ as3935@0 { interrupt-parent = <&gpio1>; interrupts = <16 1>; ams,tuning-capacitor-pf = <80>; + ams,nflwdth = <0x44>; }; diff --git a/drivers/iio/proximity/as3935.c b/drivers/iio/proximity/as3935.c index 0eeff29b61be..4a48b7ba3a1c 100644 --- a/drivers/iio/proximity/as3935.c +++ b/drivers/iio/proximity/as3935.c @@ -39,8 +39,12 @@ #define AS3935_AFE_GAIN_MAX 0x1F #define AS3935_AFE_PWR_BIT BIT(0) +#define AS3935_NFLWDTH 0x01 +#define AS3935_NFLWDTH_MASK 0x7f + #define AS3935_INT 0x03 #define AS3935_INT_MASK 0x0f +#define AS3935_DISTURB_INT BIT(2) #define AS3935_EVENT_INT BIT(3) #define AS3935_NOISE_INT BIT(0) @@ -48,6 +52,7 @@ #define AS3935_DATA_MASK 0x3F #define AS3935_TUNE_CAP 0x08 +#define AS3935_DEFAULTS 0x3C #define AS3935_CALIBRATE 0x3D #define AS3935_READ_DATA BIT(14) @@ -62,7 +67,9 @@ struct as3935_state { struct mutex lock; struct delayed_work work; + unsigned long noise_tripped; u32 tune_cap; + u32 nflwdth_reg; u8 buffer[16]; /* 8-bit data + 56-bit padding + 64-bit timestamp */ u8 buf[2] ____cacheline_aligned; }; @@ -145,12 +152,29 @@ static ssize_t as3935_sensor_sensitivity_store(struct device *dev, return len; } +static ssize_t as3935_noise_level_tripped_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct as3935_state *st = iio_priv(dev_to_iio_dev(dev)); + int ret; + + mutex_lock(&st->lock); + ret = sprintf(buf, "%d\n", !time_after(jiffies, st->noise_tripped + HZ)); + mutex_unlock(&st->lock); + + return ret; +} + static IIO_DEVICE_ATTR(sensor_sensitivity, S_IRUGO | S_IWUSR, as3935_sensor_sensitivity_show, as3935_sensor_sensitivity_store, 0); +static IIO_DEVICE_ATTR(noise_level_tripped, S_IRUGO, + as3935_noise_level_tripped_show, NULL, 0); static struct attribute *as3935_attributes[] = { &iio_dev_attr_sensor_sensitivity.dev_attr.attr, + &iio_dev_attr_noise_level_tripped.dev_attr.attr, NULL, }; @@ -246,7 +270,11 @@ static void as3935_event_work(struct work_struct *work) case AS3935_EVENT_INT: iio_trigger_poll_chained(st->trig); break; + case AS3935_DISTURB_INT: case AS3935_NOISE_INT: + mutex_lock(&st->lock); + st->noise_tripped = jiffies; + mutex_unlock(&st->lock); dev_warn(&st->spi->dev, "noise level is too high\n"); break; } @@ -269,15 +297,14 @@ static irqreturn_t as3935_interrupt_handler(int irq, void *private) static void calibrate_as3935(struct as3935_state *st) { - /* mask disturber interrupt bit */ - as3935_write(st, AS3935_INT, BIT(5)); - + as3935_write(st, AS3935_DEFAULTS, 0x96); as3935_write(st, AS3935_CALIBRATE, 0x96); as3935_write(st, AS3935_TUNE_CAP, BIT(5) | (st->tune_cap / TUNE_CAP_DIV)); mdelay(2); as3935_write(st, AS3935_TUNE_CAP, (st->tune_cap / TUNE_CAP_DIV)); + as3935_write(st, AS3935_NFLWDTH, st->nflwdth_reg); } #ifdef CONFIG_PM_SLEEP @@ -370,6 +397,15 @@ static int as3935_probe(struct spi_device *spi) return -EINVAL; } + ret = of_property_read_u32(np, + "ams,nflwdth", &st->nflwdth_reg); + if (!ret && st->nflwdth_reg > AS3935_NFLWDTH_MASK) { + dev_err(&spi->dev, + "invalid nflwdth setting of %d\n", + st->nflwdth_reg); + return -EINVAL; + } + indio_dev->dev.parent = &spi->dev; indio_dev->name = spi_get_device_id(spi)->name; indio_dev->channels = as3935_channels; @@ -384,6 +420,7 @@ static int as3935_probe(struct spi_device *spi) return -ENOMEM; st->trig = trig; + st->noise_tripped = jiffies - HZ; trig->dev.parent = indio_dev->dev.parent; iio_trigger_set_drvdata(trig, indio_dev); trig->ops = &iio_interrupt_trigger_ops; -- cgit v1.2.3 From f61dfff2f5b9fcb087bf5c444bc44b444709588f Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 5 Jul 2017 10:14:59 +0200 Subject: iio: pressure: zpa2326: Remove always-true check which confuses gcc MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit With gcc 4.1.2: drivers/iio/pressure/zpa2326.c: In function ‘zpa2326_wait_oneshot_completion’: drivers/iio/pressure/zpa2326.c:868: warning: ‘ret’ may be used uninitialized in this function When testing for "timeout < 0", timeout is already guaranteed to be strict negative, so the branch is always taken, and ret is thus always initialized. But (some version of) gcc is not smart enough to notice. Remove the check to fix this. As there is no other code in between assigning the error codes and returning them, the error codes can be returned immediately, and the intermediate variable can be dropped. Drop the "else" to please checkpatch. Fixes: e7215fe4d51e69c9 ("iio: pressure: zpa2326: report interrupted case as failure") Signed-off-by: Geert Uytterhoeven Signed-off-by: Jonathan Cameron --- drivers/iio/pressure/zpa2326.c | 10 +++------- 1 file changed, 3 insertions(+), 7 deletions(-) diff --git a/drivers/iio/pressure/zpa2326.c b/drivers/iio/pressure/zpa2326.c index ebfb1de7377f..91431454eb85 100644 --- a/drivers/iio/pressure/zpa2326.c +++ b/drivers/iio/pressure/zpa2326.c @@ -865,7 +865,6 @@ complete: static int zpa2326_wait_oneshot_completion(const struct iio_dev *indio_dev, struct zpa2326_private *private) { - int ret; unsigned int val; long timeout; @@ -887,14 +886,11 @@ static int zpa2326_wait_oneshot_completion(const struct iio_dev *indio_dev, /* Timed out. */ zpa2326_warn(indio_dev, "no one shot interrupt occurred (%ld)", timeout); - ret = -ETIME; - } else if (timeout < 0) { - zpa2326_warn(indio_dev, - "wait for one shot interrupt cancelled"); - ret = -ERESTARTSYS; + return -ETIME; } - return ret; + zpa2326_warn(indio_dev, "wait for one shot interrupt cancelled"); + return -ERESTARTSYS; } static int zpa2326_init_managed_irq(struct device *parent, -- cgit v1.2.3 From 13ffe9a26df4e156363579b25c904dd0b1e31bfb Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Wed, 13 Sep 2017 18:02:02 +0100 Subject: staging: iio: ade7759: fix signed extension bug on shift of a u8 The current shift of st->rx[2] left shifts a u8 24 bits left, promotes the integer to a an int and then to a unsigned u64. If the top bit of st->rx[2] is set then we end up with all the upper bits being set to 1. Fix this by casting st->rx[2] to a u64 before the 24 bit left shift. Detected by CoverityScan CID#144940 ("Unintended sign extension") Fixes: 2919fa54ef64 ("staging: iio: meter: new driver for ADE7759 devices") Signed-off-by: Colin Ian King Signed-off-by: Jonathan Cameron --- drivers/staging/iio/meter/ade7759.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/staging/iio/meter/ade7759.c b/drivers/staging/iio/meter/ade7759.c index 1691760339da..02573c517d9d 100644 --- a/drivers/staging/iio/meter/ade7759.c +++ b/drivers/staging/iio/meter/ade7759.c @@ -172,7 +172,7 @@ static int ade7759_spi_read_reg_40(struct device *dev, reg_address); goto error_ret; } - *val = ((u64)st->rx[1] << 32) | (st->rx[2] << 24) | + *val = ((u64)st->rx[1] << 32) | ((u64)st->rx[2] << 24) | (st->rx[3] << 16) | (st->rx[4] << 8) | st->rx[5]; error_ret: -- cgit v1.2.3 From be94a6f6d488b4767662e8949dc62361bd1d6311 Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Fri, 29 Sep 2017 15:24:05 +0200 Subject: iio: dummy: events: Add missing break Add missing break in iio_simple_dummy_write_event_config() for the voltage threshold event enable attribute. Without this writing to the in_voltage0_thresh_rising_en always returns -EINVAL even though the change was correctly applied. Fixes: 3e34e650db197 ("iio: dummy: Demonstrate the usage of new channel types") Signed-off-by: Lars-Peter Clausen Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/dummy/iio_simple_dummy_events.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/iio/dummy/iio_simple_dummy_events.c b/drivers/iio/dummy/iio_simple_dummy_events.c index ed63ffd849f8..7ec2a0bb0807 100644 --- a/drivers/iio/dummy/iio_simple_dummy_events.c +++ b/drivers/iio/dummy/iio_simple_dummy_events.c @@ -72,6 +72,7 @@ int iio_simple_dummy_write_event_config(struct iio_dev *indio_dev, st->event_en = state; else return -EINVAL; + break; default: return -EINVAL; } -- cgit v1.2.3 From 5151b4afb41dd7c5e13a130efcc95326a49da8c6 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Sat, 7 Oct 2017 16:53:20 -0700 Subject: iio: adc: dln2-adc: fix build error The dln2-adc driver uses interface(s) that are controlled by the IIO_TRIGGERED_BUFFER Kconfig symbol, so the driver needs to select that symbol to prevent the build error. drivers/iio/adc/dln2-adc.o: In function `dln2_adc_probe': dln2-adc.c:(.text+0x528): undefined reference to `devm_iio_triggered_buffer_setup' Signed-off-by: Randy Dunlap Reported-by: kbuild test robot Cc: Jonathan Cameron Cc: linux-iio@vger.kernel.org Cc: Jack Andersen Signed-off-by: Jonathan Cameron --- drivers/iio/adc/Kconfig | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig index 57625653fcb6..1d13bf03c758 100644 --- a/drivers/iio/adc/Kconfig +++ b/drivers/iio/adc/Kconfig @@ -243,6 +243,8 @@ config DA9150_GPADC config DLN2_ADC tristate "Diolan DLN-2 ADC driver support" depends on MFD_DLN2 + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER help Say yes here to build support for Diolan DLN-2 ADC. -- cgit v1.2.3 From ca4c302398963c0cae29bc168e44cf91e40ff0d3 Mon Sep 17 00:00:00 2001 From: Eugen Hristev Date: Wed, 11 Oct 2017 14:21:14 +0300 Subject: iio: adc: at91-sama5d2_adc: fix probe error on missing trigger property This fix allows platforms to probe correctly even if the trigger edge property is missing. The hardware trigger will no longer be registered in the sybsystem Preserves backwards compatibility with the support that was in the driver before the hardware trigger. https://storage.kernelci.org/mainline/master/v4.14-rc2-255-g74d83ec2b734/arm/sama5_defconfig/lab-free-electrons/boot-at91-sama5d2_xplained.txt Signed-off-by: Eugen Hristev Fixes: 5e1a1da0f ("iio: adc: at91-sama5d2_adc: add hw trigger and buffer support") Signed-off-by: Jonathan Cameron --- drivers/iio/adc/at91-sama5d2_adc.c | 45 ++++++++++++++++++++++++-------------- 1 file changed, 29 insertions(+), 16 deletions(-) diff --git a/drivers/iio/adc/at91-sama5d2_adc.c b/drivers/iio/adc/at91-sama5d2_adc.c index bc5b38e3a147..a70ef7fec95f 100644 --- a/drivers/iio/adc/at91-sama5d2_adc.c +++ b/drivers/iio/adc/at91-sama5d2_adc.c @@ -225,6 +225,7 @@ struct at91_adc_trigger { char *name; unsigned int trgmod_value; unsigned int edge_type; + bool hw_trig; }; struct at91_adc_state { @@ -254,16 +255,25 @@ static const struct at91_adc_trigger at91_adc_trigger_list[] = { .name = "external_rising", .trgmod_value = AT91_SAMA5D2_TRGR_TRGMOD_EXT_TRIG_RISE, .edge_type = IRQ_TYPE_EDGE_RISING, + .hw_trig = true, }, { .name = "external_falling", .trgmod_value = AT91_SAMA5D2_TRGR_TRGMOD_EXT_TRIG_FALL, .edge_type = IRQ_TYPE_EDGE_FALLING, + .hw_trig = true, }, { .name = "external_any", .trgmod_value = AT91_SAMA5D2_TRGR_TRGMOD_EXT_TRIG_ANY, .edge_type = IRQ_TYPE_EDGE_BOTH, + .hw_trig = true, + }, + { + .name = "software", + .trgmod_value = AT91_SAMA5D2_TRGR_TRGMOD_NO_TRIGGER, + .edge_type = IRQ_TYPE_NONE, + .hw_trig = false, }, }; @@ -597,7 +607,7 @@ static int at91_adc_probe(struct platform_device *pdev) struct at91_adc_state *st; struct resource *res; int ret, i; - u32 edge_type; + u32 edge_type = IRQ_TYPE_NONE; indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*st)); if (!indio_dev) @@ -641,14 +651,14 @@ static int at91_adc_probe(struct platform_device *pdev) ret = of_property_read_u32(pdev->dev.of_node, "atmel,trigger-edge-type", &edge_type); if (ret) { - dev_err(&pdev->dev, - "invalid or missing value for atmel,trigger-edge-type\n"); - return ret; + dev_dbg(&pdev->dev, + "atmel,trigger-edge-type not specified, only software trigger available\n"); } st->selected_trig = NULL; - for (i = 0; i < AT91_SAMA5D2_HW_TRIG_CNT; i++) + /* find the right trigger, or no trigger at all */ + for (i = 0; i < AT91_SAMA5D2_HW_TRIG_CNT + 1; i++) if (at91_adc_trigger_list[i].edge_type == edge_type) { st->selected_trig = &at91_adc_trigger_list[i]; break; @@ -717,24 +727,27 @@ static int at91_adc_probe(struct platform_device *pdev) platform_set_drvdata(pdev, indio_dev); - ret = at91_adc_buffer_init(indio_dev); - if (ret < 0) { - dev_err(&pdev->dev, "couldn't initialize the buffer.\n"); - goto per_clk_disable_unprepare; - } + if (st->selected_trig->hw_trig) { + ret = at91_adc_buffer_init(indio_dev); + if (ret < 0) { + dev_err(&pdev->dev, "couldn't initialize the buffer.\n"); + goto per_clk_disable_unprepare; + } - ret = at91_adc_trigger_init(indio_dev); - if (ret < 0) { - dev_err(&pdev->dev, "couldn't setup the triggers.\n"); - goto per_clk_disable_unprepare; + ret = at91_adc_trigger_init(indio_dev); + if (ret < 0) { + dev_err(&pdev->dev, "couldn't setup the triggers.\n"); + goto per_clk_disable_unprepare; + } } ret = iio_device_register(indio_dev); if (ret < 0) goto per_clk_disable_unprepare; - dev_info(&pdev->dev, "setting up trigger as %s\n", - st->selected_trig->name); + if (st->selected_trig->hw_trig) + dev_info(&pdev->dev, "setting up trigger as %s\n", + st->selected_trig->name); dev_info(&pdev->dev, "version: %x\n", readl_relaxed(st->base + AT91_SAMA5D2_VERSION)); -- cgit v1.2.3