From 5d589d81acf974d23af98044aac56c6339d659f8 Mon Sep 17 00:00:00 2001 From: Robin Murphy Date: Tue, 9 Feb 2016 11:04:45 +0000 Subject: of/irq: Fix msi-map calculation for nonzero rid-base The existing msi-map code is fine for shifting the entire RID space upwards, but attempting finer-grained remapping reveals a bug. It turns out that we are mistakenly treating the msi-base part as an offset, not as a new base to remap onto, so things get squiffy when rid-base is nonzero. Fix this, and at the same time add a sanity check against having msi-map-mask clash with a nonzero rid-base, as that's another thing one can easily get wrong. CC: Signed-off-by: Robin Murphy Reviewed-by: Marc Zyngier Tested-by: Stuart Yoder Acked-by: Mark Rutland Acked-by: David Daney Signed-off-by: Rob Herring --- drivers/of/irq.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/drivers/of/irq.c b/drivers/of/irq.c index 7ee21ae305ae..e7bfc175b8e1 100644 --- a/drivers/of/irq.c +++ b/drivers/of/irq.c @@ -635,6 +635,13 @@ static u32 __of_msi_map_rid(struct device *dev, struct device_node **np, msi_base = be32_to_cpup(msi_map + 2); rid_len = be32_to_cpup(msi_map + 3); + if (rid_base & ~map_mask) { + dev_err(parent_dev, + "Invalid msi-map translation - msi-map-mask (0x%x) ignores rid-base (0x%x)\n", + map_mask, rid_base); + return rid_out; + } + msi_controller_node = of_find_node_by_phandle(phandle); matched = (masked_rid >= rid_base && @@ -654,7 +661,7 @@ static u32 __of_msi_map_rid(struct device *dev, struct device_node **np, if (!matched) return rid_out; - rid_out = masked_rid + msi_base; + rid_out = masked_rid - rid_base + msi_base; dev_dbg(dev, "msi-map at: %s, using mask %08x, rid-base: %08x, msi-base: %08x, length: %08x, rid: %08x -> %08x\n", dev_name(parent_dev), map_mask, rid_base, msi_base, -- cgit v1.2.3 From 4aff7b854611d91c5fefb1553eb4c328123095ae Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Wed, 3 Feb 2016 18:00:58 +0000 Subject: dt-bindings: arm, gic-v3: require that reserved cells are always 0 The arm,gic-v3 binding was written with good intentions and doesn't enforce interrupt-cells to be 3, therefore making it easy to extend the irq description in future if necessary: > Cells 4 and beyond are reserved for future use. Unfortunately, this sentence is immediately followed up with: > When the 1st cell has a value of 0 or 1, cells 4 and beyond act as > padding, and may be ignored. It is recommended that padding cells > have a value of 0. Consequently, any extensions to the PPI or SPI interrupt specifiers must be able to work with random crap from legacy DTs, effectively necessitating a new interrupt type in the first cell. Sigh. This patch fixes the text so that additional, reserved cells are required to be zero. This looks like a reasonable thing to require and is already satisifed by the .dts files in-tree. Cc: Mark Rutland Cc: Marc Zyngier Signed-off-by: Will Deacon Acked-by: Marc Zyngier Acked-by: Mark Rutland Signed-off-by: Rob Herring --- .../devicetree/bindings/interrupt-controller/arm,gic-v3.txt | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.txt b/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.txt index 7803e77d85cb..007a5b46256a 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.txt +++ b/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.txt @@ -24,9 +24,8 @@ Main node required properties: 1 = edge triggered 4 = level triggered - Cells 4 and beyond are reserved for future use. When the 1st cell - has a value of 0 or 1, cells 4 and beyond act as padding, and may be - ignored. It is recommended that padding cells have a value of 0. + Cells 4 and beyond are reserved for future use and must have a value + of 0 if present. - reg : Specifies base physical address(s) and size of the GIC registers, in the following order: -- cgit v1.2.3 From 32e593b9c7be1a14d42ed288ab68a8e7b41ad873 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Fri, 5 Feb 2016 17:44:22 -0200 Subject: serial: fsl-imx-uart: Fix typo in fsl,dte-mode description We should say "The uart works in DCE mode". Signed-off-by: Fabio Estevam Signed-off-by: Rob Herring --- Documentation/devicetree/bindings/serial/fsl-imx-uart.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/serial/fsl-imx-uart.txt b/Documentation/devicetree/bindings/serial/fsl-imx-uart.txt index 35ae1fb3537f..ed94c217c98d 100644 --- a/Documentation/devicetree/bindings/serial/fsl-imx-uart.txt +++ b/Documentation/devicetree/bindings/serial/fsl-imx-uart.txt @@ -9,7 +9,7 @@ Optional properties: - fsl,uart-has-rtscts : Indicate the uart has rts and cts - fsl,irda-mode : Indicate the uart supports irda mode - fsl,dte-mode : Indicate the uart works in DTE mode. The uart works - is DCE mode by default. + in DCE mode by default. Note: Each uart controller should have an alias correctly numbered in "aliases" node. -- cgit v1.2.3 From 43f3408261a2fd5054ada359efa15f0b78faf0a7 Mon Sep 17 00:00:00 2001 From: Javier Martinez Canillas Date: Tue, 9 Feb 2016 14:23:52 -0300 Subject: rtc: s3c: Document required clocks in the DT binding The S3C Real Time Clock driver requires the clock and source clock to be defined in the device node but that requirement is not documented. Signed-off-by: Javier Martinez Canillas Signed-off-by: Rob Herring --- Documentation/devicetree/bindings/rtc/s3c-rtc.txt | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/Documentation/devicetree/bindings/rtc/s3c-rtc.txt b/Documentation/devicetree/bindings/rtc/s3c-rtc.txt index ac2fcd6ff4b8..1068ffce9f91 100644 --- a/Documentation/devicetree/bindings/rtc/s3c-rtc.txt +++ b/Documentation/devicetree/bindings/rtc/s3c-rtc.txt @@ -14,6 +14,10 @@ Required properties: interrupt number is the rtc alarm interrupt and second interrupt number is the rtc tick interrupt. The number of cells representing a interrupt depends on the parent interrupt controller. +- clocks: Must contain a list of phandle and clock specifier for the rtc + and source clocks. +- clock-names: Must contain "rtc" and "rtc_src" entries sorted in the + same order as the clocks property. Example: @@ -21,4 +25,6 @@ Example: compatible = "samsung,s3c6410-rtc"; reg = <0x10070000 0x100>; interrupts = <44 0 45 0>; + clocks = <&clock CLK_RTC>, <&s2mps11_osc S2MPS11_CLK_AP>; + clock-names = "rtc", "rtc_src"; }; -- cgit v1.2.3