From c3f08d0d5966f72f294f669e25ae4996f4885da0 Mon Sep 17 00:00:00 2001 From: Andrew Lunn Date: Sat, 22 Feb 2014 20:15:03 +0100 Subject: ARM: mvebu: Simplify headers and make local kirkwood is very nearly fully DT. Remove most of the address definitions from the header files and make it a local header file. Signed-off-by: Andrew Lunn Acked-by: Arnd Bergmann Tested-by: Jason Gunthorpe Signed-off-by: Jason Cooper --- arch/arm/mach-mvebu/include/mach/bridge-regs.h | 85 --------------- arch/arm/mach-mvebu/include/mach/kirkwood.h | 142 ------------------------- arch/arm/mach-mvebu/kirkwood-pm.c | 2 +- arch/arm/mach-mvebu/kirkwood.c | 9 +- arch/arm/mach-mvebu/kirkwood.h | 22 ++++ 5 files changed, 26 insertions(+), 234 deletions(-) delete mode 100644 arch/arm/mach-mvebu/include/mach/bridge-regs.h delete mode 100644 arch/arm/mach-mvebu/include/mach/kirkwood.h create mode 100644 arch/arm/mach-mvebu/kirkwood.h diff --git a/arch/arm/mach-mvebu/include/mach/bridge-regs.h b/arch/arm/mach-mvebu/include/mach/bridge-regs.h deleted file mode 100644 index 6eb8fea1f76f..000000000000 --- a/arch/arm/mach-mvebu/include/mach/bridge-regs.h +++ /dev/null @@ -1,85 +0,0 @@ -/* - * arch/arm/mach-mvebu/include/mach/bridge-regs.h - * - * Mbus-L to Mbus Bridge Registers - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __ASM_ARCH_BRIDGE_REGS_H -#define __ASM_ARCH_BRIDGE_REGS_H - -#include - -#define CPU_CONFIG (BRIDGE_VIRT_BASE + 0x0100) -#define CPU_CONFIG_PHYS (BRIDGE_PHYS_BASE + 0x0100) -#define CPU_CONFIG_ERROR_PROP 0x00000004 - -#define CPU_CONTROL (BRIDGE_VIRT_BASE + 0x0104) -#define CPU_CONTROL_PHYS (BRIDGE_PHYS_BASE + 0x0104) -#define CPU_RESET 0x00000002 - -#define RSTOUTn_MASK (BRIDGE_VIRT_BASE + 0x0108) -#define SOFT_RESET_OUT_EN 0x00000004 - -#define SYSTEM_SOFT_RESET (BRIDGE_VIRT_BASE + 0x010c) -#define SOFT_RESET 0x00000001 - -#define BRIDGE_CAUSE (BRIDGE_VIRT_BASE + 0x0110) - -#define BRIDGE_INT_TIMER1_CLR (~0x0004) - -#define IRQ_VIRT_BASE (BRIDGE_VIRT_BASE + 0x0200) -#define IRQ_CAUSE_LOW_OFF 0x0000 -#define IRQ_MASK_LOW_OFF 0x0004 -#define IRQ_CAUSE_HIGH_OFF 0x0010 -#define IRQ_MASK_HIGH_OFF 0x0014 - -#define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE + 0x0300) -#define TIMER_PHYS_BASE (BRIDGE_PHYS_BASE + 0x0300) - -#define L2_CONFIG_REG (BRIDGE_VIRT_BASE + 0x0128) -#define L2_WRITETHROUGH 0x00000010 - -#define CLOCK_GATING_CTRL (BRIDGE_VIRT_BASE + 0x11c) -#define CGC_BIT_GE0 (0) -#define CGC_BIT_PEX0 (2) -#define CGC_BIT_USB0 (3) -#define CGC_BIT_SDIO (4) -#define CGC_BIT_TSU (5) -#define CGC_BIT_DUNIT (6) -#define CGC_BIT_RUNIT (7) -#define CGC_BIT_XOR0 (8) -#define CGC_BIT_AUDIO (9) -#define CGC_BIT_SATA0 (14) -#define CGC_BIT_SATA1 (15) -#define CGC_BIT_XOR1 (16) -#define CGC_BIT_CRYPTO (17) -#define CGC_BIT_PEX1 (18) -#define CGC_BIT_GE1 (19) -#define CGC_BIT_TDM (20) -#define CGC_GE0 (1 << 0) -#define CGC_PEX0 (1 << 2) -#define CGC_USB0 (1 << 3) -#define CGC_SDIO (1 << 4) -#define CGC_TSU (1 << 5) -#define CGC_DUNIT (1 << 6) -#define CGC_RUNIT (1 << 7) -#define CGC_XOR0 (1 << 8) -#define CGC_AUDIO (1 << 9) -#define CGC_POWERSAVE (1 << 11) -#define CGC_SATA0 (1 << 14) -#define CGC_SATA1 (1 << 15) -#define CGC_XOR1 (1 << 16) -#define CGC_CRYPTO (1 << 17) -#define CGC_PEX1 (1 << 18) -#define CGC_GE1 (1 << 19) -#define CGC_TDM (1 << 20) -#define CGC_RESERVED (0x6 << 21) - -#define MEMORY_PM_CTRL (BRIDGE_VIRT_BASE + 0x118) -#define MEMORY_PM_CTRL_PHYS (BRIDGE_PHYS_BASE + 0x118) - -#endif diff --git a/arch/arm/mach-mvebu/include/mach/kirkwood.h b/arch/arm/mach-mvebu/include/mach/kirkwood.h deleted file mode 100644 index 9d966dc78d67..000000000000 --- a/arch/arm/mach-mvebu/include/mach/kirkwood.h +++ /dev/null @@ -1,142 +0,0 @@ -/* - * arch/arm/mach-mvebu/include/mach/kirkwood.h - * - * Generic definitions for Marvell Kirkwood SoC flavors: - * 88F6180, 88F6192 and 88F6281. - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __ASM_ARCH_KIRKWOOD_H -#define __ASM_ARCH_KIRKWOOD_H - -/* - * Marvell Kirkwood address maps. - * - * phys - * e0000000 PCIe #0 Memory space - * e8000000 PCIe #1 Memory space - * f1000000 on-chip peripheral registers - * f2000000 PCIe #0 I/O space - * f3000000 PCIe #1 I/O space - * f4000000 NAND controller address window - * f5000000 Security Accelerator SRAM - * - * virt phys size - * fed00000 f1000000 1M on-chip peripheral registers - * fee00000 f2000000 1M PCIe #0 I/O space - * fef00000 f3000000 1M PCIe #1 I/O space - */ - -#define KIRKWOOD_SRAM_PHYS_BASE 0xf5000000 -#define KIRKWOOD_SRAM_SIZE SZ_2K - -#define KIRKWOOD_NAND_MEM_PHYS_BASE 0xf4000000 -#define KIRKWOOD_NAND_MEM_SIZE SZ_1K - -#define KIRKWOOD_PCIE1_IO_PHYS_BASE 0xf3000000 -#define KIRKWOOD_PCIE1_IO_BUS_BASE 0x00010000 -#define KIRKWOOD_PCIE1_IO_SIZE SZ_64K - -#define KIRKWOOD_PCIE_IO_PHYS_BASE 0xf2000000 -#define KIRKWOOD_PCIE_IO_BUS_BASE 0x00000000 -#define KIRKWOOD_PCIE_IO_SIZE SZ_64K - -#define KIRKWOOD_REGS_PHYS_BASE 0xf1000000 -#define KIRKWOOD_REGS_VIRT_BASE IOMEM(0xfed00000) -#define KIRKWOOD_REGS_SIZE SZ_1M - -#define KIRKWOOD_PCIE_MEM_PHYS_BASE 0xe0000000 -#define KIRKWOOD_PCIE_MEM_BUS_BASE 0xe0000000 -#define KIRKWOOD_PCIE_MEM_SIZE SZ_128M - -#define KIRKWOOD_PCIE1_MEM_PHYS_BASE 0xe8000000 -#define KIRKWOOD_PCIE1_MEM_BUS_BASE 0xe8000000 -#define KIRKWOOD_PCIE1_MEM_SIZE SZ_128M - -/* - * Register Map - */ -#define DDR_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x00000) -#define DDR_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x00000) -#define DDR_WINDOW_CPU_BASE (DDR_PHYS_BASE + 0x1500) -#define DDR_WINDOW_CPU_SZ (0x20) -#define DDR_OPERATION_BASE (DDR_PHYS_BASE + 0x1418) - -#define DEV_BUS_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x10000) -#define DEV_BUS_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x10000) -#define SAMPLE_AT_RESET (DEV_BUS_VIRT_BASE + 0x0030) -#define DEVICE_ID (DEV_BUS_VIRT_BASE + 0x0034) -#define GPIO_LOW_VIRT_BASE (DEV_BUS_VIRT_BASE + 0x0100) -#define GPIO_HIGH_VIRT_BASE (DEV_BUS_VIRT_BASE + 0x0140) -#define RTC_PHYS_BASE (DEV_BUS_PHYS_BASE + 0x0300) -#define SPI_PHYS_BASE (DEV_BUS_PHYS_BASE + 0x0600) -#define I2C_PHYS_BASE (DEV_BUS_PHYS_BASE + 0x1000) -#define UART0_PHYS_BASE (DEV_BUS_PHYS_BASE + 0x2000) -#define UART0_VIRT_BASE (DEV_BUS_VIRT_BASE + 0x2000) -#define UART1_PHYS_BASE (DEV_BUS_PHYS_BASE + 0x2100) -#define UART1_VIRT_BASE (DEV_BUS_VIRT_BASE + 0x2100) - -#define BRIDGE_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x20000) -#define BRIDGE_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x20000) -#define BRIDGE_WINS_BASE (BRIDGE_PHYS_BASE) -#define BRIDGE_WINS_SZ (0x80) - -#define CRYPTO_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x30000) - -#define PCIE_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x40000) -#define PCIE_LINK_CTRL (PCIE_VIRT_BASE + 0x70) -#define PCIE_STATUS (PCIE_VIRT_BASE + 0x1a04) -#define PCIE1_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x44000) -#define PCIE1_LINK_CTRL (PCIE1_VIRT_BASE + 0x70) -#define PCIE1_STATUS (PCIE1_VIRT_BASE + 0x1a04) - -#define USB_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x50000) - -#define XOR0_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x60800) -#define XOR0_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x60800) -#define XOR1_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x60900) -#define XOR1_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x60900) -#define XOR0_HIGH_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x60A00) -#define XOR0_HIGH_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x60A00) -#define XOR1_HIGH_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x60B00) -#define XOR1_HIGH_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x60B00) - -#define GE00_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x70000) -#define GE01_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x74000) - -#define SATA_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x80000) -#define SATA_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x80000) -#define SATA0_IF_CTRL (SATA_VIRT_BASE + 0x2050) -#define SATA0_PHY_MODE_2 (SATA_VIRT_BASE + 0x2330) -#define SATA1_IF_CTRL (SATA_VIRT_BASE + 0x4050) -#define SATA1_PHY_MODE_2 (SATA_VIRT_BASE + 0x4330) - -#define SDIO_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x90000) - -#define AUDIO_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0xA0000) -#define AUDIO_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0xA0000) - -/* - * Supported devices and revisions. - */ -#define MV88F6281_DEV_ID 0x6281 -#define MV88F6281_REV_Z0 0 -#define MV88F6281_REV_A0 2 -#define MV88F6281_REV_A1 3 - -#define MV88F6192_DEV_ID 0x6192 -#define MV88F6192_REV_Z0 0 -#define MV88F6192_REV_A0 2 -#define MV88F6192_REV_A1 3 - -#define MV88F6180_DEV_ID 0x6180 -#define MV88F6180_REV_A0 2 -#define MV88F6180_REV_A1 3 - -#define MV88F6282_DEV_ID 0x6282 -#define MV88F6282_REV_A0 0 -#define MV88F6282_REV_A1 1 -#endif diff --git a/arch/arm/mach-mvebu/kirkwood-pm.c b/arch/arm/mach-mvebu/kirkwood-pm.c index b8c8365b84d8..cbb816f2120c 100644 --- a/arch/arm/mach-mvebu/kirkwood-pm.c +++ b/arch/arm/mach-mvebu/kirkwood-pm.c @@ -17,7 +17,7 @@ #include #include #include -#include +#include "kirkwood.h" static void __iomem *ddr_operation_base; static void __iomem *memory_pm_ctrl; diff --git a/arch/arm/mach-mvebu/kirkwood.c b/arch/arm/mach-mvebu/kirkwood.c index 4c7bbec11b1a..8a38b10532e5 100644 --- a/arch/arm/mach-mvebu/kirkwood.c +++ b/arch/arm/mach-mvebu/kirkwood.c @@ -13,19 +13,16 @@ #include #include #include +#include #include #include #include #include -#include -#include -#include +#include #include #include #include -#include -#include -#include +#include "kirkwood.h" #include "kirkwood-pm.h" #include "common.h" diff --git a/arch/arm/mach-mvebu/kirkwood.h b/arch/arm/mach-mvebu/kirkwood.h new file mode 100644 index 000000000000..89f3d1f51643 --- /dev/null +++ b/arch/arm/mach-mvebu/kirkwood.h @@ -0,0 +1,22 @@ +/* + * arch/arm/mach-mvebu/kirkwood.h + * + * Generic definitions for Marvell Kirkwood SoC flavors: + * 88F6180, 88F6192 and 88F6281. + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#define KIRKWOOD_REGS_PHYS_BASE 0xf1000000 +#define DDR_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x00000) +#define BRIDGE_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x20000) + +#define DDR_OPERATION_BASE (DDR_PHYS_BASE + 0x1418) + +#define CPU_CONFIG_PHYS (BRIDGE_PHYS_BASE + 0x0100) +#define CPU_CONFIG_ERROR_PROP 0x00000004 + +#define CPU_CONTROL_PHYS (BRIDGE_PHYS_BASE + 0x0104) +#define MEMORY_PM_CTRL_PHYS (BRIDGE_PHYS_BASE + 0x0118) -- cgit v1.2.3