From 0567f5facbdf04806a37ef521dd0893159fde715 Mon Sep 17 00:00:00 2001 From: Ard Biesheuvel Date: Thu, 1 May 2014 17:49:33 +0200 Subject: asm-generic: allow generic unaligned access if the arch supports it Switch the default unaligned access method to 'hardware implemented' if HAVE_EFFICIENT_UNALIGNED_ACCESS is set. Signed-off-by: Ard Biesheuvel Acked-by: Arnd Bergmann --- include/asm-generic/unaligned.h | 21 +++++++++++++-------- 1 file changed, 13 insertions(+), 8 deletions(-) diff --git a/include/asm-generic/unaligned.h b/include/asm-generic/unaligned.h index 03cf5936bad6..1ac097279db1 100644 --- a/include/asm-generic/unaligned.h +++ b/include/asm-generic/unaligned.h @@ -4,22 +4,27 @@ /* * This is the most generic implementation of unaligned accesses * and should work almost anywhere. - * - * If an architecture can handle unaligned accesses in hardware, - * it may want to use the linux/unaligned/access_ok.h implementation - * instead. */ #include +/* Set by the arch if it can handle unaligned accesses in hardware. */ +#ifdef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS +# include +#endif + #if defined(__LITTLE_ENDIAN) -# include -# include +# ifndef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS +# include +# include +# endif # include # define get_unaligned __get_unaligned_le # define put_unaligned __put_unaligned_le #elif defined(__BIG_ENDIAN) -# include -# include +# ifndef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS +# include +# include +# endif # include # define get_unaligned __get_unaligned_be # define put_unaligned __put_unaligned_be -- cgit v1.2.3 From c51f92693c35c141cf7d9b7e2fcbb81128324eb4 Mon Sep 17 00:00:00 2001 From: Ard Biesheuvel Date: Mon, 24 Feb 2014 15:26:27 +0100 Subject: arm64: add abstractions for FPSIMD state manipulation There are two tacit assumptions in the FPSIMD handling code that will no longer hold after the next patch that optimizes away some FPSIMD state restores: . the FPSIMD registers of this CPU contain the userland FPSIMD state of task 'current'; . when switching to a task, its FPSIMD state will always be restored from memory. This patch adds the following functions to abstract away from straight FPSIMD register file saves and restores: - fpsimd_preserve_current_state -> ensure current's FPSIMD state is saved - fpsimd_update_current_state -> replace current's FPSIMD state Where necessary, the signal handling and fork code are updated to use the above wrappers instead of poking into the FPSIMD registers directly. Signed-off-by: Ard Biesheuvel --- arch/arm64/include/asm/fpsimd.h | 3 +++ arch/arm64/kernel/fpsimd.c | 20 ++++++++++++++++++++ arch/arm64/kernel/process.c | 2 +- arch/arm64/kernel/signal.c | 9 +++------ arch/arm64/kernel/signal32.c | 9 +++------ 5 files changed, 30 insertions(+), 13 deletions(-) diff --git a/arch/arm64/include/asm/fpsimd.h b/arch/arm64/include/asm/fpsimd.h index c43b4ac13008..f4e524b67e91 100644 --- a/arch/arm64/include/asm/fpsimd.h +++ b/arch/arm64/include/asm/fpsimd.h @@ -58,6 +58,9 @@ extern void fpsimd_load_state(struct fpsimd_state *state); extern void fpsimd_thread_switch(struct task_struct *next); extern void fpsimd_flush_thread(void); +extern void fpsimd_preserve_current_state(void); +extern void fpsimd_update_current_state(struct fpsimd_state *state); + #endif #endif diff --git a/arch/arm64/kernel/fpsimd.c b/arch/arm64/kernel/fpsimd.c index 4aef42a04bdc..8a97163debc7 100644 --- a/arch/arm64/kernel/fpsimd.c +++ b/arch/arm64/kernel/fpsimd.c @@ -87,6 +87,26 @@ void fpsimd_flush_thread(void) preempt_enable(); } +/* + * Save the userland FPSIMD state of 'current' to memory + */ +void fpsimd_preserve_current_state(void) +{ + preempt_disable(); + fpsimd_save_state(¤t->thread.fpsimd_state); + preempt_enable(); +} + +/* + * Load an updated userland FPSIMD state for 'current' from memory + */ +void fpsimd_update_current_state(struct fpsimd_state *state) +{ + preempt_disable(); + fpsimd_load_state(state); + preempt_enable(); +} + #ifdef CONFIG_KERNEL_MODE_NEON /* diff --git a/arch/arm64/kernel/process.c b/arch/arm64/kernel/process.c index 6391485f342d..c5693163408c 100644 --- a/arch/arm64/kernel/process.c +++ b/arch/arm64/kernel/process.c @@ -205,7 +205,7 @@ void release_thread(struct task_struct *dead_task) int arch_dup_task_struct(struct task_struct *dst, struct task_struct *src) { - fpsimd_save_state(¤t->thread.fpsimd_state); + fpsimd_preserve_current_state(); *dst = *src; return 0; } diff --git a/arch/arm64/kernel/signal.c b/arch/arm64/kernel/signal.c index 890a591f75dd..06448a77ff53 100644 --- a/arch/arm64/kernel/signal.c +++ b/arch/arm64/kernel/signal.c @@ -51,7 +51,7 @@ static int preserve_fpsimd_context(struct fpsimd_context __user *ctx) int err; /* dump the hardware registers to the fpsimd_state structure */ - fpsimd_save_state(fpsimd); + fpsimd_preserve_current_state(); /* copy the FP and status/control registers */ err = __copy_to_user(ctx->vregs, fpsimd->vregs, sizeof(fpsimd->vregs)); @@ -86,11 +86,8 @@ static int restore_fpsimd_context(struct fpsimd_context __user *ctx) __get_user_error(fpsimd.fpcr, &ctx->fpcr, err); /* load the hardware registers from the fpsimd_state structure */ - if (!err) { - preempt_disable(); - fpsimd_load_state(&fpsimd); - preempt_enable(); - } + if (!err) + fpsimd_update_current_state(&fpsimd); return err ? -EFAULT : 0; } diff --git a/arch/arm64/kernel/signal32.c b/arch/arm64/kernel/signal32.c index b3fc9f5ec6d3..ac7e237d0bda 100644 --- a/arch/arm64/kernel/signal32.c +++ b/arch/arm64/kernel/signal32.c @@ -219,7 +219,7 @@ static int compat_preserve_vfp_context(struct compat_vfp_sigframe __user *frame) * Note that this also saves V16-31, which aren't visible * in AArch32. */ - fpsimd_save_state(fpsimd); + fpsimd_preserve_current_state(); /* Place structure header on the stack */ __put_user_error(magic, &frame->magic, err); @@ -282,11 +282,8 @@ static int compat_restore_vfp_context(struct compat_vfp_sigframe __user *frame) * We don't need to touch the exception register, so * reload the hardware state. */ - if (!err) { - preempt_disable(); - fpsimd_load_state(&fpsimd); - preempt_enable(); - } + if (!err) + fpsimd_update_current_state(&fpsimd); return err ? -EFAULT : 0; } -- cgit v1.2.3 From 005f78cd88494457ed38ce817f4e3fe5d372f0cb Mon Sep 17 00:00:00 2001 From: Ard Biesheuvel Date: Thu, 8 May 2014 11:20:23 +0200 Subject: arm64: defer reloading a task's FPSIMD state to userland resume If a task gets scheduled out and back in again and nothing has touched its FPSIMD state in the mean time, there is really no reason to reload it from memory. Similarly, repeated calls to kernel_neon_begin() and kernel_neon_end() will preserve and restore the FPSIMD state every time. This patch defers the FPSIMD state restore to the last possible moment, i.e., right before the task returns to userland. If a task does not return to userland at all (for any reason), the existing FPSIMD state is preserved and may be reused by the owning task if it gets scheduled in again on the same CPU. This patch adds two more functions to abstract away from straight FPSIMD register file saves and restores: - fpsimd_restore_current_state -> ensure current's FPSIMD state is loaded - fpsimd_flush_task_state -> invalidate live copies of a task's FPSIMD state Signed-off-by: Ard Biesheuvel --- arch/arm64/include/asm/fpsimd.h | 5 ++ arch/arm64/include/asm/thread_info.h | 4 +- arch/arm64/kernel/entry.S | 2 +- arch/arm64/kernel/fpsimd.c | 144 +++++++++++++++++++++++++++++++---- arch/arm64/kernel/ptrace.c | 2 + arch/arm64/kernel/signal.c | 4 + 6 files changed, 143 insertions(+), 18 deletions(-) diff --git a/arch/arm64/include/asm/fpsimd.h b/arch/arm64/include/asm/fpsimd.h index f4e524b67e91..7a900142dbc8 100644 --- a/arch/arm64/include/asm/fpsimd.h +++ b/arch/arm64/include/asm/fpsimd.h @@ -37,6 +37,8 @@ struct fpsimd_state { u32 fpcr; }; }; + /* the id of the last cpu to have restored this state */ + unsigned int cpu; }; #if defined(__KERNEL__) && defined(CONFIG_COMPAT) @@ -59,8 +61,11 @@ extern void fpsimd_thread_switch(struct task_struct *next); extern void fpsimd_flush_thread(void); extern void fpsimd_preserve_current_state(void); +extern void fpsimd_restore_current_state(void); extern void fpsimd_update_current_state(struct fpsimd_state *state); +extern void fpsimd_flush_task_state(struct task_struct *target); + #endif #endif diff --git a/arch/arm64/include/asm/thread_info.h b/arch/arm64/include/asm/thread_info.h index 720e70b66ffd..4a1ca1cfb2f8 100644 --- a/arch/arm64/include/asm/thread_info.h +++ b/arch/arm64/include/asm/thread_info.h @@ -100,6 +100,7 @@ static inline struct thread_info *current_thread_info(void) #define TIF_SIGPENDING 0 #define TIF_NEED_RESCHED 1 #define TIF_NOTIFY_RESUME 2 /* callback before returning to user */ +#define TIF_FOREIGN_FPSTATE 3 /* CPU's FP state is not current's */ #define TIF_SYSCALL_TRACE 8 #define TIF_POLLING_NRFLAG 16 #define TIF_MEMDIE 18 /* is terminating due to OOM killer */ @@ -112,10 +113,11 @@ static inline struct thread_info *current_thread_info(void) #define _TIF_SIGPENDING (1 << TIF_SIGPENDING) #define _TIF_NEED_RESCHED (1 << TIF_NEED_RESCHED) #define _TIF_NOTIFY_RESUME (1 << TIF_NOTIFY_RESUME) +#define _TIF_FOREIGN_FPSTATE (1 << TIF_FOREIGN_FPSTATE) #define _TIF_32BIT (1 << TIF_32BIT) #define _TIF_WORK_MASK (_TIF_NEED_RESCHED | _TIF_SIGPENDING | \ - _TIF_NOTIFY_RESUME) + _TIF_NOTIFY_RESUME | _TIF_FOREIGN_FPSTATE) #endif /* __KERNEL__ */ #endif /* __ASM_THREAD_INFO_H */ diff --git a/arch/arm64/kernel/entry.S b/arch/arm64/kernel/entry.S index 39ac630d83de..80464e2fb1a5 100644 --- a/arch/arm64/kernel/entry.S +++ b/arch/arm64/kernel/entry.S @@ -576,7 +576,7 @@ fast_work_pending: str x0, [sp, #S_X0] // returned x0 work_pending: tbnz x1, #TIF_NEED_RESCHED, work_resched - /* TIF_SIGPENDING or TIF_NOTIFY_RESUME case */ + /* TIF_SIGPENDING, TIF_NOTIFY_RESUME or TIF_FOREIGN_FPSTATE case */ ldr x2, [sp, #S_PSTATE] mov x0, sp // 'regs' tst x2, #PSR_MODE_MASK // user mode regs? diff --git a/arch/arm64/kernel/fpsimd.c b/arch/arm64/kernel/fpsimd.c index 8a97163debc7..5ae89303c3ab 100644 --- a/arch/arm64/kernel/fpsimd.c +++ b/arch/arm64/kernel/fpsimd.c @@ -34,6 +34,60 @@ #define FPEXC_IXF (1 << 4) #define FPEXC_IDF (1 << 7) +/* + * In order to reduce the number of times the FPSIMD state is needlessly saved + * and restored, we need to keep track of two things: + * (a) for each task, we need to remember which CPU was the last one to have + * the task's FPSIMD state loaded into its FPSIMD registers; + * (b) for each CPU, we need to remember which task's userland FPSIMD state has + * been loaded into its FPSIMD registers most recently, or whether it has + * been used to perform kernel mode NEON in the meantime. + * + * For (a), we add a 'cpu' field to struct fpsimd_state, which gets updated to + * the id of the current CPU everytime the state is loaded onto a CPU. For (b), + * we add the per-cpu variable 'fpsimd_last_state' (below), which contains the + * address of the userland FPSIMD state of the task that was loaded onto the CPU + * the most recently, or NULL if kernel mode NEON has been performed after that. + * + * With this in place, we no longer have to restore the next FPSIMD state right + * when switching between tasks. Instead, we can defer this check to userland + * resume, at which time we verify whether the CPU's fpsimd_last_state and the + * task's fpsimd_state.cpu are still mutually in sync. If this is the case, we + * can omit the FPSIMD restore. + * + * As an optimization, we use the thread_info flag TIF_FOREIGN_FPSTATE to + * indicate whether or not the userland FPSIMD state of the current task is + * present in the registers. The flag is set unless the FPSIMD registers of this + * CPU currently contain the most recent userland FPSIMD state of the current + * task. + * + * For a certain task, the sequence may look something like this: + * - the task gets scheduled in; if both the task's fpsimd_state.cpu field + * contains the id of the current CPU, and the CPU's fpsimd_last_state per-cpu + * variable points to the task's fpsimd_state, the TIF_FOREIGN_FPSTATE flag is + * cleared, otherwise it is set; + * + * - the task returns to userland; if TIF_FOREIGN_FPSTATE is set, the task's + * userland FPSIMD state is copied from memory to the registers, the task's + * fpsimd_state.cpu field is set to the id of the current CPU, the current + * CPU's fpsimd_last_state pointer is set to this task's fpsimd_state and the + * TIF_FOREIGN_FPSTATE flag is cleared; + * + * - the task executes an ordinary syscall; upon return to userland, the + * TIF_FOREIGN_FPSTATE flag will still be cleared, so no FPSIMD state is + * restored; + * + * - the task executes a syscall which executes some NEON instructions; this is + * preceded by a call to kernel_neon_begin(), which copies the task's FPSIMD + * register contents to memory, clears the fpsimd_last_state per-cpu variable + * and sets the TIF_FOREIGN_FPSTATE flag; + * + * - the task gets preempted after kernel_neon_end() is called; as we have not + * returned from the 2nd syscall yet, TIF_FOREIGN_FPSTATE is still set so + * whatever is in the FPSIMD registers is not saved to memory, but discarded. + */ +static DEFINE_PER_CPU(struct fpsimd_state *, fpsimd_last_state); + /* * Trapped FP/ASIMD access. */ @@ -72,41 +126,96 @@ void do_fpsimd_exc(unsigned int esr, struct pt_regs *regs) void fpsimd_thread_switch(struct task_struct *next) { - /* check if not kernel threads */ - if (current->mm) + /* + * Save the current FPSIMD state to memory, but only if whatever is in + * the registers is in fact the most recent userland FPSIMD state of + * 'current'. + */ + if (current->mm && !test_thread_flag(TIF_FOREIGN_FPSTATE)) fpsimd_save_state(¤t->thread.fpsimd_state); - if (next->mm) - fpsimd_load_state(&next->thread.fpsimd_state); + + if (next->mm) { + /* + * If we are switching to a task whose most recent userland + * FPSIMD state is already in the registers of *this* cpu, + * we can skip loading the state from memory. Otherwise, set + * the TIF_FOREIGN_FPSTATE flag so the state will be loaded + * upon the next return to userland. + */ + struct fpsimd_state *st = &next->thread.fpsimd_state; + + if (__this_cpu_read(fpsimd_last_state) == st + && st->cpu == smp_processor_id()) + clear_ti_thread_flag(task_thread_info(next), + TIF_FOREIGN_FPSTATE); + else + set_ti_thread_flag(task_thread_info(next), + TIF_FOREIGN_FPSTATE); + } } void fpsimd_flush_thread(void) { - preempt_disable(); memset(¤t->thread.fpsimd_state, 0, sizeof(struct fpsimd_state)); - fpsimd_load_state(¤t->thread.fpsimd_state); - preempt_enable(); + set_thread_flag(TIF_FOREIGN_FPSTATE); } /* - * Save the userland FPSIMD state of 'current' to memory + * Save the userland FPSIMD state of 'current' to memory, but only if the state + * currently held in the registers does in fact belong to 'current' */ void fpsimd_preserve_current_state(void) { preempt_disable(); - fpsimd_save_state(¤t->thread.fpsimd_state); + if (!test_thread_flag(TIF_FOREIGN_FPSTATE)) + fpsimd_save_state(¤t->thread.fpsimd_state); preempt_enable(); } /* - * Load an updated userland FPSIMD state for 'current' from memory + * Load the userland FPSIMD state of 'current' from memory, but only if the + * FPSIMD state already held in the registers is /not/ the most recent FPSIMD + * state of 'current' + */ +void fpsimd_restore_current_state(void) +{ + preempt_disable(); + if (test_and_clear_thread_flag(TIF_FOREIGN_FPSTATE)) { + struct fpsimd_state *st = ¤t->thread.fpsimd_state; + + fpsimd_load_state(st); + this_cpu_write(fpsimd_last_state, st); + st->cpu = smp_processor_id(); + } + preempt_enable(); +} + +/* + * Load an updated userland FPSIMD state for 'current' from memory and set the + * flag that indicates that the FPSIMD register contents are the most recent + * FPSIMD state of 'current' */ void fpsimd_update_current_state(struct fpsimd_state *state) { preempt_disable(); fpsimd_load_state(state); + if (test_and_clear_thread_flag(TIF_FOREIGN_FPSTATE)) { + struct fpsimd_state *st = ¤t->thread.fpsimd_state; + + this_cpu_write(fpsimd_last_state, st); + st->cpu = smp_processor_id(); + } preempt_enable(); } +/* + * Invalidate live CPU copies of task t's FPSIMD state + */ +void fpsimd_flush_task_state(struct task_struct *t) +{ + t->thread.fpsimd_state.cpu = NR_CPUS; +} + #ifdef CONFIG_KERNEL_MODE_NEON /* @@ -118,16 +227,19 @@ void kernel_neon_begin(void) BUG_ON(in_interrupt()); preempt_disable(); - if (current->mm) + /* + * Save the userland FPSIMD state if we have one and if we haven't done + * so already. Clear fpsimd_last_state to indicate that there is no + * longer userland FPSIMD state in the registers. + */ + if (current->mm && !test_and_set_thread_flag(TIF_FOREIGN_FPSTATE)) fpsimd_save_state(¤t->thread.fpsimd_state); + this_cpu_write(fpsimd_last_state, NULL); } EXPORT_SYMBOL(kernel_neon_begin); void kernel_neon_end(void) { - if (current->mm) - fpsimd_load_state(¤t->thread.fpsimd_state); - preempt_enable(); } EXPORT_SYMBOL(kernel_neon_end); @@ -140,12 +252,12 @@ static int fpsimd_cpu_pm_notifier(struct notifier_block *self, { switch (cmd) { case CPU_PM_ENTER: - if (current->mm) + if (current->mm && !test_thread_flag(TIF_FOREIGN_FPSTATE)) fpsimd_save_state(¤t->thread.fpsimd_state); break; case CPU_PM_EXIT: if (current->mm) - fpsimd_load_state(¤t->thread.fpsimd_state); + set_thread_flag(TIF_FOREIGN_FPSTATE); break; case CPU_PM_ENTER_FAILED: default: diff --git a/arch/arm64/kernel/ptrace.c b/arch/arm64/kernel/ptrace.c index 6a8928bba03c..f8700eca24e7 100644 --- a/arch/arm64/kernel/ptrace.c +++ b/arch/arm64/kernel/ptrace.c @@ -517,6 +517,7 @@ static int fpr_set(struct task_struct *target, const struct user_regset *regset, return ret; target->thread.fpsimd_state.user_fpsimd = newstate; + fpsimd_flush_task_state(target); return ret; } @@ -764,6 +765,7 @@ static int compat_vfp_set(struct task_struct *target, uregs->fpcr = fpscr & VFP_FPSCR_CTRL_MASK; } + fpsimd_flush_task_state(target); return ret; } diff --git a/arch/arm64/kernel/signal.c b/arch/arm64/kernel/signal.c index 06448a77ff53..882f01774365 100644 --- a/arch/arm64/kernel/signal.c +++ b/arch/arm64/kernel/signal.c @@ -413,4 +413,8 @@ asmlinkage void do_notify_resume(struct pt_regs *regs, clear_thread_flag(TIF_NOTIFY_RESUME); tracehook_notify_resume(regs); } + + if (thread_flags & _TIF_FOREIGN_FPSTATE) + fpsimd_restore_current_state(); + } -- cgit v1.2.3 From 190f1ca85d071114930dd7abe6b5d103e9d5572f Mon Sep 17 00:00:00 2001 From: Ard Biesheuvel Date: Mon, 24 Feb 2014 15:26:29 +0100 Subject: arm64: add support for kernel mode NEON in interrupt context This patch modifies kernel_neon_begin() and kernel_neon_end(), so they may be called from any context. To address the case where only a couple of registers are needed, kernel_neon_begin_partial(u32) is introduced which takes as a parameter the number of bottom 'n' NEON q-registers required. To mark the end of such a partial section, the regular kernel_neon_end() should be used. Signed-off-by: Ard Biesheuvel --- arch/arm64/include/asm/fpsimd.h | 15 ++++++++++++ arch/arm64/include/asm/fpsimdmacros.h | 35 ++++++++++++++++++++++++++++ arch/arm64/include/asm/neon.h | 6 ++++- arch/arm64/kernel/entry-fpsimd.S | 24 +++++++++++++++++++ arch/arm64/kernel/fpsimd.c | 44 ++++++++++++++++++++++++----------- 5 files changed, 109 insertions(+), 15 deletions(-) diff --git a/arch/arm64/include/asm/fpsimd.h b/arch/arm64/include/asm/fpsimd.h index 7a900142dbc8..50f559f574fe 100644 --- a/arch/arm64/include/asm/fpsimd.h +++ b/arch/arm64/include/asm/fpsimd.h @@ -41,6 +41,17 @@ struct fpsimd_state { unsigned int cpu; }; +/* + * Struct for stacking the bottom 'n' FP/SIMD registers. + */ +struct fpsimd_partial_state { + u32 fpsr; + u32 fpcr; + u32 num_regs; + __uint128_t vregs[32]; +}; + + #if defined(__KERNEL__) && defined(CONFIG_COMPAT) /* Masks for extracting the FPSR and FPCR from the FPSCR */ #define VFP_FPSCR_STAT_MASK 0xf800009f @@ -66,6 +77,10 @@ extern void fpsimd_update_current_state(struct fpsimd_state *state); extern void fpsimd_flush_task_state(struct task_struct *target); +extern void fpsimd_save_partial_state(struct fpsimd_partial_state *state, + u32 num_regs); +extern void fpsimd_load_partial_state(struct fpsimd_partial_state *state); + #endif #endif diff --git a/arch/arm64/include/asm/fpsimdmacros.h b/arch/arm64/include/asm/fpsimdmacros.h index bbec599c96bd..768414d55e64 100644 --- a/arch/arm64/include/asm/fpsimdmacros.h +++ b/arch/arm64/include/asm/fpsimdmacros.h @@ -62,3 +62,38 @@ ldr w\tmpnr, [\state, #16 * 2 + 4] msr fpcr, x\tmpnr .endm + +.altmacro +.macro fpsimd_save_partial state, numnr, tmpnr1, tmpnr2 + mrs x\tmpnr1, fpsr + str w\numnr, [\state, #8] + mrs x\tmpnr2, fpcr + stp w\tmpnr1, w\tmpnr2, [\state] + adr x\tmpnr1, 0f + add \state, \state, x\numnr, lsl #4 + sub x\tmpnr1, x\tmpnr1, x\numnr, lsl #1 + br x\tmpnr1 + .irp qa, 30, 28, 26, 24, 22, 20, 18, 16, 14, 12, 10, 8, 6, 4, 2, 0 + .irp qb, %(qa + 1) + stp q\qa, q\qb, [\state, # -16 * \qa - 16] + .endr + .endr +0: +.endm + +.macro fpsimd_restore_partial state, tmpnr1, tmpnr2 + ldp w\tmpnr1, w\tmpnr2, [\state] + msr fpsr, x\tmpnr1 + msr fpcr, x\tmpnr2 + adr x\tmpnr1, 0f + ldr w\tmpnr2, [\state, #8] + add \state, \state, x\tmpnr2, lsl #4 + sub x\tmpnr1, x\tmpnr1, x\tmpnr2, lsl #1 + br x\tmpnr1 + .irp qa, 30, 28, 26, 24, 22, 20, 18, 16, 14, 12, 10, 8, 6, 4, 2, 0 + .irp qb, %(qa + 1) + ldp q\qa, q\qb, [\state, # -16 * \qa - 16] + .endr + .endr +0: +.endm diff --git a/arch/arm64/include/asm/neon.h b/arch/arm64/include/asm/neon.h index b0cc58a97780..13ce4cc18e26 100644 --- a/arch/arm64/include/asm/neon.h +++ b/arch/arm64/include/asm/neon.h @@ -8,7 +8,11 @@ * published by the Free Software Foundation. */ +#include + #define cpu_has_neon() (1) -void kernel_neon_begin(void); +#define kernel_neon_begin() kernel_neon_begin_partial(32) + +void kernel_neon_begin_partial(u32 num_regs); void kernel_neon_end(void); diff --git a/arch/arm64/kernel/entry-fpsimd.S b/arch/arm64/kernel/entry-fpsimd.S index 6a27cd6dbfa6..d358ccacfc00 100644 --- a/arch/arm64/kernel/entry-fpsimd.S +++ b/arch/arm64/kernel/entry-fpsimd.S @@ -41,3 +41,27 @@ ENTRY(fpsimd_load_state) fpsimd_restore x0, 8 ret ENDPROC(fpsimd_load_state) + +#ifdef CONFIG_KERNEL_MODE_NEON + +/* + * Save the bottom n FP registers. + * + * x0 - pointer to struct fpsimd_partial_state + */ +ENTRY(fpsimd_save_partial_state) + fpsimd_save_partial x0, 1, 8, 9 + ret +ENDPROC(fpsimd_load_partial_state) + +/* + * Load the bottom n FP registers. + * + * x0 - pointer to struct fpsimd_partial_state + */ +ENTRY(fpsimd_load_partial_state) + fpsimd_restore_partial x0, 8, 9 + ret +ENDPROC(fpsimd_load_partial_state) + +#endif diff --git a/arch/arm64/kernel/fpsimd.c b/arch/arm64/kernel/fpsimd.c index 5ae89303c3ab..ad8aebb1cdef 100644 --- a/arch/arm64/kernel/fpsimd.c +++ b/arch/arm64/kernel/fpsimd.c @@ -218,29 +218,45 @@ void fpsimd_flush_task_state(struct task_struct *t) #ifdef CONFIG_KERNEL_MODE_NEON +static DEFINE_PER_CPU(struct fpsimd_partial_state, hardirq_fpsimdstate); +static DEFINE_PER_CPU(struct fpsimd_partial_state, softirq_fpsimdstate); + /* * Kernel-side NEON support functions */ -void kernel_neon_begin(void) +void kernel_neon_begin_partial(u32 num_regs) { - /* Avoid using the NEON in interrupt context */ - BUG_ON(in_interrupt()); - preempt_disable(); + if (in_interrupt()) { + struct fpsimd_partial_state *s = this_cpu_ptr( + in_irq() ? &hardirq_fpsimdstate : &softirq_fpsimdstate); - /* - * Save the userland FPSIMD state if we have one and if we haven't done - * so already. Clear fpsimd_last_state to indicate that there is no - * longer userland FPSIMD state in the registers. - */ - if (current->mm && !test_and_set_thread_flag(TIF_FOREIGN_FPSTATE)) - fpsimd_save_state(¤t->thread.fpsimd_state); - this_cpu_write(fpsimd_last_state, NULL); + BUG_ON(num_regs > 32); + fpsimd_save_partial_state(s, roundup(num_regs, 2)); + } else { + /* + * Save the userland FPSIMD state if we have one and if we + * haven't done so already. Clear fpsimd_last_state to indicate + * that there is no longer userland FPSIMD state in the + * registers. + */ + preempt_disable(); + if (current->mm && + !test_and_set_thread_flag(TIF_FOREIGN_FPSTATE)) + fpsimd_save_state(¤t->thread.fpsimd_state); + this_cpu_write(fpsimd_last_state, NULL); + } } -EXPORT_SYMBOL(kernel_neon_begin); +EXPORT_SYMBOL(kernel_neon_begin_partial); void kernel_neon_end(void) { - preempt_enable(); + if (in_interrupt()) { + struct fpsimd_partial_state *s = this_cpu_ptr( + in_irq() ? &hardirq_fpsimdstate : &softirq_fpsimdstate); + fpsimd_load_partial_state(s); + } else { + preempt_enable(); + } } EXPORT_SYMBOL(kernel_neon_end); -- cgit v1.2.3 From a41dc0e841523efe1df7fa5ad48b5e9027a921df Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Thu, 3 Apr 2014 17:48:54 +0100 Subject: arm64: Implement cache_line_size() based on CTR_EL0.CWG The hardware provides the maximum cache line size in the system via the CTR_EL0.CWG bits. This patch implements the cache_line_size() function to read such information, together with a sanity check if the statically defined L1_CACHE_BYTES is smaller than the hardware value. Signed-off-by: Catalin Marinas Acked-by: Will Deacon --- arch/arm64/Kconfig | 3 +++ arch/arm64/include/asm/cache.h | 13 ++++++++++++- arch/arm64/include/asm/cachetype.h | 11 +++++++++++ arch/arm64/kernel/setup.c | 15 +++++++++++++++ 4 files changed, 41 insertions(+), 1 deletion(-) diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig index e759af5d7098..9a5b5fea86ba 100644 --- a/arch/arm64/Kconfig +++ b/arch/arm64/Kconfig @@ -242,6 +242,9 @@ config ARCH_WANT_HUGE_PMD_SHARE config HAVE_ARCH_TRANSPARENT_HUGEPAGE def_bool y +config ARCH_HAS_CACHE_LINE_SIZE + def_bool y + source "mm/Kconfig" config XEN_DOM0 diff --git a/arch/arm64/include/asm/cache.h b/arch/arm64/include/asm/cache.h index 390308a67f0d..88cc05b5f3ac 100644 --- a/arch/arm64/include/asm/cache.h +++ b/arch/arm64/include/asm/cache.h @@ -16,6 +16,8 @@ #ifndef __ASM_CACHE_H #define __ASM_CACHE_H +#include + #define L1_CACHE_SHIFT 6 #define L1_CACHE_BYTES (1 << L1_CACHE_SHIFT) @@ -27,6 +29,15 @@ * the CPU. */ #define ARCH_DMA_MINALIGN L1_CACHE_BYTES -#define ARCH_SLAB_MINALIGN 8 + +#ifndef __ASSEMBLY__ + +static inline int cache_line_size(void) +{ + u32 cwg = cache_type_cwg(); + return cwg ? 4 << cwg : L1_CACHE_BYTES; +} + +#endif /* __ASSEMBLY__ */ #endif diff --git a/arch/arm64/include/asm/cachetype.h b/arch/arm64/include/asm/cachetype.h index 85f5f511352a..4b23e758d5e0 100644 --- a/arch/arm64/include/asm/cachetype.h +++ b/arch/arm64/include/asm/cachetype.h @@ -20,12 +20,16 @@ #define CTR_L1IP_SHIFT 14 #define CTR_L1IP_MASK 3 +#define CTR_CWG_SHIFT 24 +#define CTR_CWG_MASK 15 #define ICACHE_POLICY_RESERVED 0 #define ICACHE_POLICY_AIVIVT 1 #define ICACHE_POLICY_VIPT 2 #define ICACHE_POLICY_PIPT 3 +#ifndef __ASSEMBLY__ + static inline u32 icache_policy(void) { return (read_cpuid_cachetype() >> CTR_L1IP_SHIFT) & CTR_L1IP_MASK; @@ -45,4 +49,11 @@ static inline int icache_is_aivivt(void) return icache_policy() == ICACHE_POLICY_AIVIVT; } +static inline u32 cache_type_cwg(void) +{ + return (read_cpuid_cachetype() >> CTR_CWG_SHIFT) & CTR_CWG_MASK; +} + +#endif /* __ASSEMBLY__ */ + #endif /* __ASM_CACHETYPE_H */ diff --git a/arch/arm64/kernel/setup.c b/arch/arm64/kernel/setup.c index 7ec784653b29..5b9e046d580e 100644 --- a/arch/arm64/kernel/setup.c +++ b/arch/arm64/kernel/setup.c @@ -25,6 +25,7 @@ #include #include #include +#include #include #include #include @@ -198,6 +199,8 @@ static void __init setup_processor(void) { struct cpu_info *cpu_info; u64 features, block; + u32 cwg; + int cls; cpu_info = lookup_processor_type(read_cpuid_id()); if (!cpu_info) { @@ -214,6 +217,18 @@ static void __init setup_processor(void) sprintf(init_utsname()->machine, ELF_PLATFORM); elf_hwcap = 0; + /* + * Check for sane CTR_EL0.CWG value. + */ + cwg = cache_type_cwg(); + cls = cache_line_size(); + if (!cwg) + pr_warn("No Cache Writeback Granule information, assuming cache line size %d\n", + cls); + if (L1_CACHE_BYTES < cls) + pr_warn("L1_CACHE_BYTES smaller than the Cache Writeback Granule (%d < %d)\n", + L1_CACHE_BYTES, cls); + /* * ID_AA64ISAR0_EL1 contains 4-bit wide signed feature blocks. * The blocks we test below represent incremental functionality -- cgit v1.2.3 From 6400111399e16a535231ebd76389c894ea1837ff Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Fri, 4 Apr 2014 11:49:05 +0100 Subject: arm64: Remove boot thread synchronisation for spin-table release method The synchronisation with the boot thread already happens in __cpu_up() via wait_for_completion_timeout(). In addition, __cpu_up() calls are protected by the cpu_add_remove_lock mutex and already serialised. Signed-off-by: Catalin Marinas --- arch/arm64/kernel/smp_spin_table.c | 39 +------------------------------------- 1 file changed, 1 insertion(+), 38 deletions(-) diff --git a/arch/arm64/kernel/smp_spin_table.c b/arch/arm64/kernel/smp_spin_table.c index 7a530d2cc807..0347d38eea29 100644 --- a/arch/arm64/kernel/smp_spin_table.c +++ b/arch/arm64/kernel/smp_spin_table.c @@ -30,7 +30,6 @@ extern void secondary_holding_pen(void); volatile unsigned long secondary_holding_pen_release = INVALID_HWID; static phys_addr_t cpu_release_addr[NR_CPUS]; -static DEFINE_RAW_SPINLOCK(boot_lock); /* * Write secondary_holding_pen_release in a way that is guaranteed to be @@ -94,14 +93,6 @@ static int smp_spin_table_cpu_prepare(unsigned int cpu) static int smp_spin_table_cpu_boot(unsigned int cpu) { - unsigned long timeout; - - /* - * Set synchronisation state between this boot processor - * and the secondary one - */ - raw_spin_lock(&boot_lock); - /* * Update the pen release flag. */ @@ -112,34 +103,7 @@ static int smp_spin_table_cpu_boot(unsigned int cpu) */ sev(); - timeout = jiffies + (1 * HZ); - while (time_before(jiffies, timeout)) { - if (secondary_holding_pen_release == INVALID_HWID) - break; - udelay(10); - } - - /* - * Now the secondary core is starting up let it run its - * calibrations, then wait for it to finish - */ - raw_spin_unlock(&boot_lock); - - return secondary_holding_pen_release != INVALID_HWID ? -ENOSYS : 0; -} - -static void smp_spin_table_cpu_postboot(void) -{ - /* - * Let the primary processor know we're out of the pen. - */ - write_pen_release(INVALID_HWID); - - /* - * Synchronise with the boot thread. - */ - raw_spin_lock(&boot_lock); - raw_spin_unlock(&boot_lock); + return 0; } const struct cpu_operations smp_spin_table_ops = { @@ -147,5 +111,4 @@ const struct cpu_operations smp_spin_table_ops = { .cpu_init = smp_spin_table_cpu_init, .cpu_prepare = smp_spin_table_cpu_prepare, .cpu_boot = smp_spin_table_cpu_boot, - .cpu_postboot = smp_spin_table_cpu_postboot, }; -- cgit v1.2.3 From 9141300a5884b57cea6d32c4e3fd16a337cfc99a Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Sun, 6 Apr 2014 23:04:12 +0100 Subject: arm64: Provide read/write fault information in compat signal handlers For AArch32, bit 11 (WnR) of the FSR/ESR register is set when the fault was caused by a write access and applications like Qemu rely on such information being provided in sigcontext. This patch introduces the ESR_EL1 tracking for the arm64 kernel faults and sets bit 11 accordingly in compat sigcontext. Signed-off-by: Catalin Marinas --- arch/arm64/include/asm/esr.h | 6 ++++-- arch/arm64/include/asm/processor.h | 1 + arch/arm64/kernel/signal32.c | 7 ++++++- arch/arm64/kernel/traps.c | 7 +++++-- arch/arm64/mm/fault.c | 8 ++++---- 5 files changed, 20 insertions(+), 9 deletions(-) diff --git a/arch/arm64/include/asm/esr.h b/arch/arm64/include/asm/esr.h index c4a7f940b387..72674f4c3871 100644 --- a/arch/arm64/include/asm/esr.h +++ b/arch/arm64/include/asm/esr.h @@ -18,9 +18,11 @@ #ifndef __ASM_ESR_H #define __ASM_ESR_H -#define ESR_EL1_EC_SHIFT (26) -#define ESR_EL1_IL (1U << 25) +#define ESR_EL1_WRITE (1 << 6) +#define ESR_EL1_CM (1 << 8) +#define ESR_EL1_IL (1 << 25) +#define ESR_EL1_EC_SHIFT (26) #define ESR_EL1_EC_UNKNOWN (0x00) #define ESR_EL1_EC_WFI (0x01) #define ESR_EL1_EC_CP15_32 (0x03) diff --git a/arch/arm64/include/asm/processor.h b/arch/arm64/include/asm/processor.h index 45b20cd6cbca..34de2a8f7d93 100644 --- a/arch/arm64/include/asm/processor.h +++ b/arch/arm64/include/asm/processor.h @@ -79,6 +79,7 @@ struct thread_struct { unsigned long tp_value; struct fpsimd_state fpsimd_state; unsigned long fault_address; /* fault info */ + unsigned long fault_code; /* ESR_EL1 value */ struct debug_info debug; /* debugging */ }; diff --git a/arch/arm64/kernel/signal32.c b/arch/arm64/kernel/signal32.c index b3fc9f5ec6d3..050c1c2af777 100644 --- a/arch/arm64/kernel/signal32.c +++ b/arch/arm64/kernel/signal32.c @@ -23,6 +23,7 @@ #include #include +#include #include #include #include @@ -81,6 +82,8 @@ struct compat_vfp_sigframe { #define VFP_MAGIC 0x56465001 #define VFP_STORAGE_SIZE sizeof(struct compat_vfp_sigframe) +#define FSR_WRITE_SHIFT (11) + struct compat_aux_sigframe { struct compat_vfp_sigframe vfp; @@ -500,7 +503,9 @@ static int compat_setup_sigframe(struct compat_sigframe __user *sf, __put_user_error(regs->pstate, &sf->uc.uc_mcontext.arm_cpsr, err); __put_user_error((compat_ulong_t)0, &sf->uc.uc_mcontext.trap_no, err); - __put_user_error((compat_ulong_t)0, &sf->uc.uc_mcontext.error_code, err); + /* set the compat FSR WnR */ + __put_user_error(!!(current->thread.fault_code & ESR_EL1_WRITE) << + FSR_WRITE_SHIFT, &sf->uc.uc_mcontext.error_code, err); __put_user_error(current->thread.fault_address, &sf->uc.uc_mcontext.fault_address, err); __put_user_error(set->sig[0], &sf->uc.uc_mcontext.oldmask, err); diff --git a/arch/arm64/kernel/traps.c b/arch/arm64/kernel/traps.c index 7ffadddb645d..c43cfa9b8304 100644 --- a/arch/arm64/kernel/traps.c +++ b/arch/arm64/kernel/traps.c @@ -251,10 +251,13 @@ void die(const char *str, struct pt_regs *regs, int err) void arm64_notify_die(const char *str, struct pt_regs *regs, struct siginfo *info, int err) { - if (user_mode(regs)) + if (user_mode(regs)) { + current->thread.fault_address = 0; + current->thread.fault_code = err; force_sig_info(info->si_signo, info, current); - else + } else { die(str, regs, err); + } } asmlinkage void __exception do_undefinstr(struct pt_regs *regs) diff --git a/arch/arm64/mm/fault.c b/arch/arm64/mm/fault.c index c23751b06120..bcc965e2cce1 100644 --- a/arch/arm64/mm/fault.c +++ b/arch/arm64/mm/fault.c @@ -32,6 +32,7 @@ #include #include +#include #include #include #include @@ -123,6 +124,7 @@ static void __do_user_fault(struct task_struct *tsk, unsigned long addr, } tsk->thread.fault_address = addr; + tsk->thread.fault_code = esr; si.si_signo = sig; si.si_errno = 0; si.si_code = code; @@ -148,8 +150,6 @@ static void do_bad_area(unsigned long addr, unsigned int esr, struct pt_regs *re #define VM_FAULT_BADMAP 0x010000 #define VM_FAULT_BADACCESS 0x020000 -#define ESR_WRITE (1 << 6) -#define ESR_CM (1 << 8) #define ESR_LNX_EXEC (1 << 24) static int __do_page_fault(struct mm_struct *mm, unsigned long addr, @@ -218,7 +218,7 @@ static int __kprobes do_page_fault(unsigned long addr, unsigned int esr, if (esr & ESR_LNX_EXEC) { vm_flags = VM_EXEC; - } else if ((esr & ESR_WRITE) && !(esr & ESR_CM)) { + } else if ((esr & ESR_EL1_WRITE) && !(esr & ESR_EL1_CM)) { vm_flags = VM_WRITE; mm_flags |= FAULT_FLAG_WRITE; } @@ -525,7 +525,7 @@ asmlinkage int __exception do_debug_exception(unsigned long addr, info.si_errno = 0; info.si_code = inf->code; info.si_addr = (void __user *)addr; - arm64_notify_die("", regs, &info, esr); + arm64_notify_die("", regs, &info, 0); return 0; } -- cgit v1.2.3 From 0e0276d1e1dd063cd14ce377707970d0417a0792 Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Fri, 4 Apr 2014 15:42:16 +0100 Subject: arm64: Remove the aux_context structure This patch removes the aux_context structure (and the containing file) to allow the placement of the _aarch64_ctx end magic based on the context stored on the signal stack. Signed-off-by: Catalin Marinas --- arch/arm64/include/asm/sigcontext.h | 31 ------------------------------- arch/arm64/kernel/signal.c | 27 +++++++++++++++++---------- 2 files changed, 17 insertions(+), 41 deletions(-) delete mode 100644 arch/arm64/include/asm/sigcontext.h diff --git a/arch/arm64/include/asm/sigcontext.h b/arch/arm64/include/asm/sigcontext.h deleted file mode 100644 index dca1094acc74..000000000000 --- a/arch/arm64/include/asm/sigcontext.h +++ /dev/null @@ -1,31 +0,0 @@ -/* - * Copyright (C) 2012 ARM Ltd. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#ifndef __ASM_SIGCONTEXT_H -#define __ASM_SIGCONTEXT_H - -#include - -/* - * Auxiliary context saved in the sigcontext.__reserved array. Not exported to - * user space as it will change with the addition of new context. User space - * should check the magic/size information. - */ -struct aux_context { - struct fpsimd_context fpsimd; - /* additional context to be added before "end" */ - struct _aarch64_ctx end; -}; -#endif diff --git a/arch/arm64/kernel/signal.c b/arch/arm64/kernel/signal.c index 890a591f75dd..7ff2eee96c6b 100644 --- a/arch/arm64/kernel/signal.c +++ b/arch/arm64/kernel/signal.c @@ -100,8 +100,7 @@ static int restore_sigframe(struct pt_regs *regs, { sigset_t set; int i, err; - struct aux_context __user *aux = - (struct aux_context __user *)sf->uc.uc_mcontext.__reserved; + void *aux = sf->uc.uc_mcontext.__reserved; err = __copy_from_user(&set, &sf->uc.uc_sigmask, sizeof(set)); if (err == 0) @@ -121,8 +120,11 @@ static int restore_sigframe(struct pt_regs *regs, err |= !valid_user_regs(®s->user_regs); - if (err == 0) - err |= restore_fpsimd_context(&aux->fpsimd); + if (err == 0) { + struct fpsimd_context *fpsimd_ctx = + container_of(aux, struct fpsimd_context, head); + err |= restore_fpsimd_context(fpsimd_ctx); + } return err; } @@ -167,8 +169,8 @@ static int setup_sigframe(struct rt_sigframe __user *sf, struct pt_regs *regs, sigset_t *set) { int i, err = 0; - struct aux_context __user *aux = - (struct aux_context __user *)sf->uc.uc_mcontext.__reserved; + void *aux = sf->uc.uc_mcontext.__reserved; + struct _aarch64_ctx *end; /* set up the stack frame for unwinding */ __put_user_error(regs->regs[29], &sf->fp, err); @@ -185,12 +187,17 @@ static int setup_sigframe(struct rt_sigframe __user *sf, err |= __copy_to_user(&sf->uc.uc_sigmask, set, sizeof(*set)); - if (err == 0) - err |= preserve_fpsimd_context(&aux->fpsimd); + if (err == 0) { + struct fpsimd_context *fpsimd_ctx = + container_of(aux, struct fpsimd_context, head); + err |= preserve_fpsimd_context(fpsimd_ctx); + aux += sizeof(*fpsimd_ctx); + } /* set the "end" magic */ - __put_user_error(0, &aux->end.magic, err); - __put_user_error(0, &aux->end.size, err); + end = aux; + __put_user_error(0, &end->magic, err); + __put_user_error(0, &end->size, err); return err; } -- cgit v1.2.3 From 15af1942dd61ee236a48b3de14d6f31c0b9e8116 Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Mon, 16 Sep 2013 15:19:27 +0100 Subject: arm64: Expose ESR_EL1 information to user when SIGSEGV/SIGBUS This information is useful for instruction emulators to detect read/write and access size without having to decode the faulting instruction. The current patch exports it via sigcontext (struct esr_context) and is only valid for SIGSEGV and SIGBUS. Signed-off-by: Catalin Marinas --- arch/arm64/include/uapi/asm/sigcontext.h | 7 +++++++ arch/arm64/kernel/signal.c | 10 ++++++++++ 2 files changed, 17 insertions(+) diff --git a/arch/arm64/include/uapi/asm/sigcontext.h b/arch/arm64/include/uapi/asm/sigcontext.h index 690ad51cc901..b72cf405b3fe 100644 --- a/arch/arm64/include/uapi/asm/sigcontext.h +++ b/arch/arm64/include/uapi/asm/sigcontext.h @@ -53,5 +53,12 @@ struct fpsimd_context { __uint128_t vregs[32]; }; +/* ESR_EL1 context */ +#define ESR_MAGIC 0x45535201 + +struct esr_context { + struct _aarch64_ctx head; + u64 esr; +}; #endif /* _UAPI__ASM_SIGCONTEXT_H */ diff --git a/arch/arm64/kernel/signal.c b/arch/arm64/kernel/signal.c index 7ff2eee96c6b..dc2ab1b0ac0d 100644 --- a/arch/arm64/kernel/signal.c +++ b/arch/arm64/kernel/signal.c @@ -194,6 +194,16 @@ static int setup_sigframe(struct rt_sigframe __user *sf, aux += sizeof(*fpsimd_ctx); } + /* fault information, if valid */ + if (current->thread.fault_code) { + struct esr_context *esr_ctx = + container_of(aux, struct esr_context, head); + __put_user_error(ESR_MAGIC, &esr_ctx->head.magic, err); + __put_user_error(sizeof(*esr_ctx), &esr_ctx->head.size, err); + __put_user_error(current->thread.fault_code, &esr_ctx->esr, err); + aux += sizeof(*esr_ctx); + } + /* set the "end" magic */ end = aux; __put_user_error(0, &end->magic, err); -- cgit v1.2.3 From bc07c2c6e9ed125d362af0214b6313dca180cb08 Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Thu, 3 Apr 2014 16:17:32 +0100 Subject: arm64: Introduce execute-only page access permissions The ARMv8 architecture allows execute-only user permissions by clearing the PTE_UXN and PTE_USER bits. The kernel, however, can still access such page, so execute-only page permission does not protect against read(2)/write(2) etc. accesses. Systems requiring such protection must implement/enable features like SECCOMP. This patch changes the arm64 __P100 and __S100 protection_map[] macros to the new __PAGE_EXECONLY attributes. A side effect is that pte_valid_user() no longer triggers for __PAGE_EXECONLY since PTE_USER isn't set. To work around this, the check is done on the PTE_NG bit via the pte_valid_ng() macro. VM_READ is also checked now for page faults. Signed-off-by: Catalin Marinas --- arch/arm64/include/asm/pgtable.h | 11 ++++++----- arch/arm64/mm/fault.c | 5 ++--- 2 files changed, 8 insertions(+), 8 deletions(-) diff --git a/arch/arm64/include/asm/pgtable.h b/arch/arm64/include/asm/pgtable.h index 90c811f05a2e..e50bb3cbd8f2 100644 --- a/arch/arm64/include/asm/pgtable.h +++ b/arch/arm64/include/asm/pgtable.h @@ -90,6 +90,7 @@ extern pgprot_t pgprot_default; #define __PAGE_COPY_EXEC __pgprot(_PAGE_DEFAULT | PTE_USER | PTE_NG | PTE_PXN) #define __PAGE_READONLY __pgprot(_PAGE_DEFAULT | PTE_USER | PTE_NG | PTE_PXN | PTE_UXN) #define __PAGE_READONLY_EXEC __pgprot(_PAGE_DEFAULT | PTE_USER | PTE_NG | PTE_PXN) +#define __PAGE_EXECONLY __pgprot(_PAGE_DEFAULT | PTE_NG | PTE_PXN) #endif /* __ASSEMBLY__ */ @@ -97,7 +98,7 @@ extern pgprot_t pgprot_default; #define __P001 __PAGE_READONLY #define __P010 __PAGE_COPY #define __P011 __PAGE_COPY -#define __P100 __PAGE_READONLY_EXEC +#define __P100 __PAGE_EXECONLY #define __P101 __PAGE_READONLY_EXEC #define __P110 __PAGE_COPY_EXEC #define __P111 __PAGE_COPY_EXEC @@ -106,7 +107,7 @@ extern pgprot_t pgprot_default; #define __S001 __PAGE_READONLY #define __S010 __PAGE_SHARED #define __S011 __PAGE_SHARED -#define __S100 __PAGE_READONLY_EXEC +#define __S100 __PAGE_EXECONLY #define __S101 __PAGE_READONLY_EXEC #define __S110 __PAGE_SHARED_EXEC #define __S111 __PAGE_SHARED_EXEC @@ -143,8 +144,8 @@ extern struct page *empty_zero_page; #define pte_write(pte) (!!(pte_val(pte) & PTE_WRITE)) #define pte_exec(pte) (!(pte_val(pte) & PTE_UXN)) -#define pte_valid_user(pte) \ - ((pte_val(pte) & (PTE_VALID | PTE_USER)) == (PTE_VALID | PTE_USER)) +#define pte_valid_ng(pte) \ + ((pte_val(pte) & (PTE_VALID | PTE_NG)) == (PTE_VALID | PTE_NG)) static inline pte_t pte_wrprotect(pte_t pte) { @@ -198,7 +199,7 @@ extern void __sync_icache_dcache(pte_t pteval, unsigned long addr); static inline void set_pte_at(struct mm_struct *mm, unsigned long addr, pte_t *ptep, pte_t pte) { - if (pte_valid_user(pte)) { + if (pte_valid_ng(pte)) { if (!pte_special(pte) && pte_exec(pte)) __sync_icache_dcache(pte, addr); if (pte_dirty(pte) && pte_write(pte)) diff --git a/arch/arm64/mm/fault.c b/arch/arm64/mm/fault.c index bcc965e2cce1..89c6763d5e7e 100644 --- a/arch/arm64/mm/fault.c +++ b/arch/arm64/mm/fault.c @@ -173,8 +173,7 @@ static int __do_page_fault(struct mm_struct *mm, unsigned long addr, good_area: /* * Check that the permissions on the VMA allow for the fault which - * occurred. If we encountered a write or exec fault, we must have - * appropriate permissions, otherwise we allow any permission. + * occurred. */ if (!(vma->vm_flags & vm_flags)) { fault = VM_FAULT_BADACCESS; @@ -196,7 +195,7 @@ static int __kprobes do_page_fault(unsigned long addr, unsigned int esr, struct task_struct *tsk; struct mm_struct *mm; int fault, sig, code; - unsigned long vm_flags = VM_READ | VM_WRITE | VM_EXEC; + unsigned long vm_flags = VM_READ | VM_WRITE; unsigned int mm_flags = FAULT_FLAG_ALLOW_RETRY | FAULT_FLAG_KILLABLE; tsk = current; -- cgit v1.2.3 From a501e32430d4232012ab708b8f0ce841f29e0f02 Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Thu, 3 Apr 2014 15:57:15 +0100 Subject: arm64: Clean up the default pgprot setting The primary aim of this patchset is to remove the pgprot_default and prot_sect_default global variables and rely strictly on predefined values. The original goal was to be able to run SMP kernels on UP hardware by not setting the Shareability bit. However, it is unlikely to see UP ARMv8 hardware and even if we do, the Shareability bit is no longer assumed to disable cacheable accesses. A side effect is that the device mappings now have the Shareability attribute set. The hardware, however, should ignore it since Device accesses are always Outer Shareable. Following the removal of the two global variables, there is some PROT_* macro reshuffling and cleanup, including the __PAGE_* macros (replaced by PAGE_*). Signed-off-by: Catalin Marinas Acked-by: Will Deacon --- arch/arm64/include/asm/io.h | 8 ---- arch/arm64/include/asm/pgtable.h | 98 +++++++++++++++++++--------------------- arch/arm64/kernel/setup.c | 1 - arch/arm64/mm/dma-mapping.c | 2 +- arch/arm64/mm/mmu.c | 36 +-------------- 5 files changed, 50 insertions(+), 95 deletions(-) diff --git a/arch/arm64/include/asm/io.h b/arch/arm64/include/asm/io.h index a1bef78f0303..e0ecdcf6632d 100644 --- a/arch/arm64/include/asm/io.h +++ b/arch/arm64/include/asm/io.h @@ -230,19 +230,11 @@ extern void __iomem *__ioremap(phys_addr_t phys_addr, size_t size, pgprot_t prot extern void __iounmap(volatile void __iomem *addr); extern void __iomem *ioremap_cache(phys_addr_t phys_addr, size_t size); -#define PROT_DEFAULT (PTE_TYPE_PAGE | PTE_AF | PTE_DIRTY) -#define PROT_DEVICE_nGnRE (PROT_DEFAULT | PTE_PXN | PTE_UXN | PTE_ATTRINDX(MT_DEVICE_nGnRE)) -#define PROT_NORMAL_NC (PROT_DEFAULT | PTE_ATTRINDX(MT_NORMAL_NC)) -#define PROT_NORMAL (PROT_DEFAULT | PTE_ATTRINDX(MT_NORMAL)) - #define ioremap(addr, size) __ioremap((addr), (size), __pgprot(PROT_DEVICE_nGnRE)) #define ioremap_nocache(addr, size) __ioremap((addr), (size), __pgprot(PROT_DEVICE_nGnRE)) #define ioremap_wc(addr, size) __ioremap((addr), (size), __pgprot(PROT_NORMAL_NC)) #define iounmap __iounmap -#define PROT_SECT_DEFAULT (PMD_TYPE_SECT | PMD_SECT_AF) -#define PROT_SECT_DEVICE_nGnRE (PROT_SECT_DEFAULT | PTE_PXN | PTE_UXN | PMD_ATTRINDX(MT_DEVICE_nGnRE)) - #define ARCH_HAS_IOREMAP_WC #include diff --git a/arch/arm64/include/asm/pgtable.h b/arch/arm64/include/asm/pgtable.h index e50bb3cbd8f2..752348dbb4f3 100644 --- a/arch/arm64/include/asm/pgtable.h +++ b/arch/arm64/include/asm/pgtable.h @@ -52,67 +52,60 @@ extern void __pgd_error(const char *file, int line, unsigned long val); #endif #define pgd_ERROR(pgd) __pgd_error(__FILE__, __LINE__, pgd_val(pgd)) -/* - * The pgprot_* and protection_map entries will be fixed up at runtime to - * include the cachable and bufferable bits based on memory policy, as well as - * any architecture dependent bits like global/ASID and SMP shared mapping - * bits. - */ -#define _PAGE_DEFAULT PTE_TYPE_PAGE | PTE_AF +#ifdef CONFIG_SMP +#define PROT_DEFAULT (PTE_TYPE_PAGE | PTE_AF | PTE_SHARED) +#define PROT_SECT_DEFAULT (PMD_TYPE_SECT | PMD_SECT_AF | PMD_SECT_S) +#else +#define PROT_DEFAULT (PTE_TYPE_PAGE | PTE_AF) +#define PROT_SECT_DEFAULT (PMD_TYPE_SECT | PMD_SECT_AF) +#endif -extern pgprot_t pgprot_default; +#define PROT_DEVICE_nGnRE (PROT_DEFAULT | PTE_PXN | PTE_UXN | PTE_ATTRINDX(MT_DEVICE_nGnRE)) +#define PROT_NORMAL_NC (PROT_DEFAULT | PTE_PXN | PTE_UXN | PTE_ATTRINDX(MT_NORMAL_NC)) +#define PROT_NORMAL (PROT_DEFAULT | PTE_PXN | PTE_UXN | PTE_ATTRINDX(MT_NORMAL)) -#define __pgprot_modify(prot,mask,bits) \ - __pgprot((pgprot_val(prot) & ~(mask)) | (bits)) +#define PROT_SECT_DEVICE_nGnRE (PROT_SECT_DEFAULT | PMD_SECT_PXN | PMD_SECT_UXN | PMD_ATTRINDX(MT_DEVICE_nGnRE)) +#define PROT_SECT_NORMAL (PROT_SECT_DEFAULT | PMD_SECT_PXN | PMD_SECT_UXN | PMD_ATTRINDX(MT_NORMAL)) +#define PROT_SECT_NORMAL_EXEC (PROT_SECT_DEFAULT | PMD_SECT_UXN | PMD_ATTRINDX(MT_NORMAL)) -#define _MOD_PROT(p, b) __pgprot_modify(p, 0, b) +#define _PAGE_DEFAULT (PROT_DEFAULT | PTE_ATTRINDX(MT_NORMAL)) -#define PAGE_NONE __pgprot_modify(pgprot_default, PTE_TYPE_MASK, PTE_PROT_NONE | PTE_PXN | PTE_UXN) -#define PAGE_SHARED _MOD_PROT(pgprot_default, PTE_USER | PTE_NG | PTE_PXN | PTE_UXN | PTE_WRITE) -#define PAGE_SHARED_EXEC _MOD_PROT(pgprot_default, PTE_USER | PTE_NG | PTE_PXN | PTE_WRITE) -#define PAGE_COPY _MOD_PROT(pgprot_default, PTE_USER | PTE_NG | PTE_PXN | PTE_UXN) -#define PAGE_COPY_EXEC _MOD_PROT(pgprot_default, PTE_USER | PTE_NG | PTE_PXN) -#define PAGE_READONLY _MOD_PROT(pgprot_default, PTE_USER | PTE_NG | PTE_PXN | PTE_UXN) -#define PAGE_READONLY_EXEC _MOD_PROT(pgprot_default, PTE_USER | PTE_NG | PTE_PXN) -#define PAGE_KERNEL _MOD_PROT(pgprot_default, PTE_PXN | PTE_UXN | PTE_DIRTY | PTE_WRITE) -#define PAGE_KERNEL_EXEC _MOD_PROT(pgprot_default, PTE_UXN | PTE_DIRTY | PTE_WRITE) +#define PAGE_KERNEL __pgprot(_PAGE_DEFAULT | PTE_PXN | PTE_UXN | PTE_DIRTY | PTE_WRITE) +#define PAGE_KERNEL_EXEC __pgprot(_PAGE_DEFAULT | PTE_UXN | PTE_DIRTY | PTE_WRITE) -#define PAGE_HYP _MOD_PROT(pgprot_default, PTE_HYP) +#define PAGE_HYP __pgprot(_PAGE_DEFAULT | PTE_HYP) #define PAGE_HYP_DEVICE __pgprot(PROT_DEVICE_nGnRE | PTE_HYP) -#define PAGE_S2 __pgprot_modify(pgprot_default, PTE_S2_MEMATTR_MASK, PTE_S2_MEMATTR(MT_S2_NORMAL) | PTE_S2_RDONLY) +#define PAGE_S2 __pgprot(PROT_DEFAULT | PTE_S2_MEMATTR(MT_S2_NORMAL) | PTE_S2_RDONLY) #define PAGE_S2_DEVICE __pgprot(PROT_DEFAULT | PTE_S2_MEMATTR(MT_S2_DEVICE_nGnRE) | PTE_S2_RDWR | PTE_UXN) -#define __PAGE_NONE __pgprot(((_PAGE_DEFAULT) & ~PTE_TYPE_MASK) | PTE_PROT_NONE | PTE_PXN | PTE_UXN) -#define __PAGE_SHARED __pgprot(_PAGE_DEFAULT | PTE_USER | PTE_NG | PTE_PXN | PTE_UXN | PTE_WRITE) -#define __PAGE_SHARED_EXEC __pgprot(_PAGE_DEFAULT | PTE_USER | PTE_NG | PTE_PXN | PTE_WRITE) -#define __PAGE_COPY __pgprot(_PAGE_DEFAULT | PTE_USER | PTE_NG | PTE_PXN | PTE_UXN) -#define __PAGE_COPY_EXEC __pgprot(_PAGE_DEFAULT | PTE_USER | PTE_NG | PTE_PXN) -#define __PAGE_READONLY __pgprot(_PAGE_DEFAULT | PTE_USER | PTE_NG | PTE_PXN | PTE_UXN) -#define __PAGE_READONLY_EXEC __pgprot(_PAGE_DEFAULT | PTE_USER | PTE_NG | PTE_PXN) -#define __PAGE_EXECONLY __pgprot(_PAGE_DEFAULT | PTE_NG | PTE_PXN) - -#endif /* __ASSEMBLY__ */ - -#define __P000 __PAGE_NONE -#define __P001 __PAGE_READONLY -#define __P010 __PAGE_COPY -#define __P011 __PAGE_COPY -#define __P100 __PAGE_EXECONLY -#define __P101 __PAGE_READONLY_EXEC -#define __P110 __PAGE_COPY_EXEC -#define __P111 __PAGE_COPY_EXEC - -#define __S000 __PAGE_NONE -#define __S001 __PAGE_READONLY -#define __S010 __PAGE_SHARED -#define __S011 __PAGE_SHARED -#define __S100 __PAGE_EXECONLY -#define __S101 __PAGE_READONLY_EXEC -#define __S110 __PAGE_SHARED_EXEC -#define __S111 __PAGE_SHARED_EXEC +#define PAGE_NONE __pgprot(((_PAGE_DEFAULT) & ~PTE_TYPE_MASK) | PTE_PROT_NONE | PTE_PXN | PTE_UXN) +#define PAGE_SHARED __pgprot(_PAGE_DEFAULT | PTE_USER | PTE_NG | PTE_PXN | PTE_UXN | PTE_WRITE) +#define PAGE_SHARED_EXEC __pgprot(_PAGE_DEFAULT | PTE_USER | PTE_NG | PTE_PXN | PTE_WRITE) +#define PAGE_COPY __pgprot(_PAGE_DEFAULT | PTE_USER | PTE_NG | PTE_PXN | PTE_UXN) +#define PAGE_COPY_EXEC __pgprot(_PAGE_DEFAULT | PTE_USER | PTE_NG | PTE_PXN) +#define PAGE_READONLY __pgprot(_PAGE_DEFAULT | PTE_USER | PTE_NG | PTE_PXN | PTE_UXN) +#define PAGE_READONLY_EXEC __pgprot(_PAGE_DEFAULT | PTE_USER | PTE_NG | PTE_PXN) +#define PAGE_EXECONLY __pgprot(_PAGE_DEFAULT | PTE_NG | PTE_PXN) + +#define __P000 PAGE_NONE +#define __P001 PAGE_READONLY +#define __P010 PAGE_COPY +#define __P011 PAGE_COPY +#define __P100 PAGE_EXECONLY +#define __P101 PAGE_READONLY_EXEC +#define __P110 PAGE_COPY_EXEC +#define __P111 PAGE_COPY_EXEC + +#define __S000 PAGE_NONE +#define __S001 PAGE_READONLY +#define __S010 PAGE_SHARED +#define __S011 PAGE_SHARED +#define __S100 PAGE_EXECONLY +#define __S101 PAGE_READONLY_EXEC +#define __S110 PAGE_SHARED_EXEC +#define __S111 PAGE_SHARED_EXEC -#ifndef __ASSEMBLY__ /* * ZERO_PAGE is a global shared page that is always zero: used * for zero-mapped memory areas etc.. @@ -274,6 +267,9 @@ static inline int has_transparent_hugepage(void) return 1; } +#define __pgprot_modify(prot,mask,bits) \ + __pgprot((pgprot_val(prot) & ~(mask)) | (bits)) + /* * Mark the prot value as uncacheable and unbufferable. */ diff --git a/arch/arm64/kernel/setup.c b/arch/arm64/kernel/setup.c index 5b9e046d580e..7450c5802c3f 100644 --- a/arch/arm64/kernel/setup.c +++ b/arch/arm64/kernel/setup.c @@ -376,7 +376,6 @@ void __init setup_arch(char **cmdline_p) *cmdline_p = boot_command_line; - init_mem_pgprot(); early_ioremap_init(); parse_early_param(); diff --git a/arch/arm64/mm/dma-mapping.c b/arch/arm64/mm/dma-mapping.c index c851eb44dc50..4164c5ace9f8 100644 --- a/arch/arm64/mm/dma-mapping.c +++ b/arch/arm64/mm/dma-mapping.c @@ -115,7 +115,7 @@ static void *__dma_alloc_noncoherent(struct device *dev, size_t size, for (i = 0; i < (size >> PAGE_SHIFT); i++) map[i] = page + i; coherent_ptr = vmap(map, size >> PAGE_SHIFT, VM_MAP, - __get_dma_pgprot(attrs, pgprot_default, false)); + __get_dma_pgprot(attrs, __pgprot(PROT_NORMAL_NC), false)); kfree(map); if (!coherent_ptr) goto no_map; diff --git a/arch/arm64/mm/mmu.c b/arch/arm64/mm/mmu.c index 0a472c41a67f..2c0e1dda8163 100644 --- a/arch/arm64/mm/mmu.c +++ b/arch/arm64/mm/mmu.c @@ -43,11 +43,6 @@ struct page *empty_zero_page; EXPORT_SYMBOL(empty_zero_page); -pgprot_t pgprot_default; -EXPORT_SYMBOL(pgprot_default); - -static pmdval_t prot_sect_kernel; - struct cachepolicy { const char policy[16]; u64 mair; @@ -122,33 +117,6 @@ static int __init early_cachepolicy(char *p) } early_param("cachepolicy", early_cachepolicy); -/* - * Adjust the PMD section entries according to the CPU in use. - */ -void __init init_mem_pgprot(void) -{ - pteval_t default_pgprot; - int i; - - default_pgprot = PTE_ATTRINDX(MT_NORMAL); - prot_sect_kernel = PMD_TYPE_SECT | PMD_SECT_AF | PMD_ATTRINDX(MT_NORMAL); - -#ifdef CONFIG_SMP - /* - * Mark memory with the "shared" attribute for SMP systems - */ - default_pgprot |= PTE_SHARED; - prot_sect_kernel |= PMD_SECT_S; -#endif - - for (i = 0; i < 16; i++) { - unsigned long v = pgprot_val(protection_map[i]); - protection_map[i] = __pgprot(v | default_pgprot); - } - - pgprot_default = __pgprot(PTE_TYPE_PAGE | PTE_AF | default_pgprot); -} - pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn, unsigned long size, pgprot_t vma_prot) { @@ -205,7 +173,7 @@ static void __init alloc_init_pmd(pud_t *pud, unsigned long addr, /* try section mapping first */ if (((addr | next | phys) & ~SECTION_MASK) == 0) { pmd_t old_pmd =*pmd; - set_pmd(pmd, __pmd(phys | prot_sect_kernel)); + set_pmd(pmd, __pmd(phys | PROT_SECT_NORMAL_EXEC)); /* * Check for previous table entries created during * boot (__create_page_tables) and flush them. @@ -417,7 +385,7 @@ int __meminit vmemmap_populate(unsigned long start, unsigned long end, int node) if (!p) return -ENOMEM; - set_pmd(pmd, __pmd(__pa(p) | prot_sect_kernel)); + set_pmd(pmd, __pmd(__pa(p) | PROT_SECT_NORMAL)); } else vmemmap_verify((pte_t *)pmd, node, addr, next); } while (addr = next, addr != end); -- cgit v1.2.3 From ba6bf8c85cb0d263ca9a98ef6a76ab651a97c60b Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Thu, 8 May 2014 22:13:47 +0100 Subject: arm64: Make atomic64_t() return "long", not "long long" arm64 sets CONFIG_64BIT=y and hence uses the "long counter" atomic64_t definition from include/linux/types.h. Make atomic64_read() return "long", not "long long". Signed-off-by: Bjorn Helgaas Signed-off-by: Catalin Marinas --- arch/arm64/include/asm/atomic.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm64/include/asm/atomic.h b/arch/arm64/include/asm/atomic.h index 0237f0867e37..9c48d74652cb 100644 --- a/arch/arm64/include/asm/atomic.h +++ b/arch/arm64/include/asm/atomic.h @@ -162,7 +162,7 @@ static inline int __atomic_add_unless(atomic_t *v, int a, int u) */ #define ATOMIC64_INIT(i) { (i) } -#define atomic64_read(v) (*(volatile long long *)&(v)->counter) +#define atomic64_read(v) (*(volatile long *)&(v)->counter) #define atomic64_set(v,i) (((v)->counter) = (i)) static inline void atomic64_add(u64 i, atomic64_t *v) -- cgit v1.2.3 From 206a2a73a62d37c8b8f6ddd3180c202b2e7298ab Mon Sep 17 00:00:00 2001 From: Steve Capper Date: Tue, 6 May 2014 14:02:27 +0100 Subject: arm64: mm: Create gigabyte kernel logical mappings where possible We have the capability to map 1GB level 1 blocks when using a 4K granule. This patch adjusts the create_mapping logic s.t. when mapping physical memory on boot, we attempt to use a 1GB block if both the VA and PA start and end are 1GB aligned. This both reduces the levels of lookup required to resolve a kernel logical address, as well as reduces TLB pressure on cores that support 1GB TLB entries. Signed-off-by: Steve Capper Tested-by: Jungseok Lee [catalin.marinas@arm.com: s/prot_sect_kernel/PROT_SECT_NORMAL_EXEC/] Signed-off-by: Catalin Marinas --- arch/arm64/include/asm/pgtable-hwdef.h | 2 ++ arch/arm64/include/asm/pgtable.h | 7 +++++++ arch/arm64/mm/mmu.c | 28 +++++++++++++++++++++++++++- 3 files changed, 36 insertions(+), 1 deletion(-) diff --git a/arch/arm64/include/asm/pgtable-hwdef.h b/arch/arm64/include/asm/pgtable-hwdef.h index 5fc8a66c3924..955e8c5f0afb 100644 --- a/arch/arm64/include/asm/pgtable-hwdef.h +++ b/arch/arm64/include/asm/pgtable-hwdef.h @@ -29,6 +29,8 @@ */ #define PUD_TABLE_BIT (_AT(pgdval_t, 1) << 1) +#define PUD_TYPE_MASK (_AT(pgdval_t, 3) << 0) +#define PUD_TYPE_SECT (_AT(pgdval_t, 1) << 0) /* * Level 2 descriptor (PMD). diff --git a/arch/arm64/include/asm/pgtable.h b/arch/arm64/include/asm/pgtable.h index 752348dbb4f3..3de4ef8bfd82 100644 --- a/arch/arm64/include/asm/pgtable.h +++ b/arch/arm64/include/asm/pgtable.h @@ -259,6 +259,7 @@ static inline pmd_t pte_pmd(pte_t pte) #define mk_pmd(page,prot) pfn_pmd(page_to_pfn(page),prot) #define pmd_page(pmd) pfn_to_page(__phys_to_pfn(pmd_val(pmd) & PHYS_MASK)) +#define pud_pfn(pud) (((pud_val(pud) & PUD_MASK) & PHYS_MASK) >> PAGE_SHIFT) #define set_pmd_at(mm, addr, pmdp, pmd) set_pmd(pmdp, pmd) @@ -292,6 +293,12 @@ extern pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn, #define pmd_sect(pmd) ((pmd_val(pmd) & PMD_TYPE_MASK) == \ PMD_TYPE_SECT) +#ifdef ARM64_64K_PAGES +#define pud_sect(pud) (0) +#else +#define pud_sect(pud) ((pud_val(pud) & PUD_TYPE_MASK) == \ + PUD_TYPE_SECT) +#endif static inline void set_pmd(pmd_t *pmdp, pmd_t pmd) { diff --git a/arch/arm64/mm/mmu.c b/arch/arm64/mm/mmu.c index 2c0e1dda8163..3a729de96f15 100644 --- a/arch/arm64/mm/mmu.c +++ b/arch/arm64/mm/mmu.c @@ -195,7 +195,30 @@ static void __init alloc_init_pud(pgd_t *pgd, unsigned long addr, do { next = pud_addr_end(addr, end); - alloc_init_pmd(pud, addr, next, phys); + + /* + * For 4K granule only, attempt to put down a 1GB block + */ + if ((PAGE_SHIFT == 12) && + ((addr | next | phys) & ~PUD_MASK) == 0) { + pud_t old_pud = *pud; + set_pud(pud, __pud(phys | PROT_SECT_NORMAL_EXEC)); + + /* + * If we have an old value for a pud, it will + * be pointing to a pmd table that we no longer + * need (from swapper_pg_dir). + * + * Look up the old pmd table and free it. + */ + if (!pud_none(old_pud)) { + phys_addr_t table = __pa(pmd_offset(&old_pud, 0)); + memblock_free(table, PAGE_SIZE); + flush_tlb_all(); + } + } else { + alloc_init_pmd(pud, addr, next, phys); + } phys += next - addr; } while (pud++, addr = next, addr != end); } @@ -338,6 +361,9 @@ int kern_addr_valid(unsigned long addr) if (pud_none(*pud)) return 0; + if (pud_sect(*pud)) + return pfn_valid(pud_pfn(*pud)); + pmd = pmd_offset(pud, addr); if (pmd_none(*pmd)) return 0; -- cgit v1.2.3 From e1dfda9ced9bea1413a736f0d578f8218a7788ec Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Wed, 30 Apr 2014 16:23:06 +0100 Subject: arm64: xchg: prevent warning if return value is unused MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Some users of xchg() don't bother using the return value, which results in a compiler warning like the following (from kgdb): In file included from linux/arch/arm64/include/asm/atomic.h:27:0, from include/linux/atomic.h:4, from include/linux/spinlock.h:402, from include/linux/seqlock.h:35, from include/linux/time.h:5, from include/uapi/linux/timex.h:56, from include/linux/timex.h:56, from include/linux/sched.h:19, from include/linux/pid_namespace.h:4, from kernel/debug/debug_core.c:30: kernel/debug/debug_core.c: In function ‘kgdb_cpu_enter’: linux/arch/arm64/include/asm/cmpxchg.h:75:3: warning: value computed is not used [-Wunused-value] ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr)))) ^ linux/arch/arm64/include/asm/atomic.h:132:30: note: in expansion of macro ‘xchg’ #define atomic_xchg(v, new) (xchg(&((v)->counter), new)) kernel/debug/debug_core.c:504:4: note: in expansion of macro ‘atomic_xchg’ atomic_xchg(&kgdb_active, cpu); ^ This patch makes use of the same trick as we do for cmpxchg, by assigning the return value to a dummy variable in the xchg() macro itself. Signed-off-by: Will Deacon Signed-off-by: Catalin Marinas --- arch/arm64/include/asm/cmpxchg.h | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/arch/arm64/include/asm/cmpxchg.h b/arch/arm64/include/asm/cmpxchg.h index 57c0fa7bf711..ddb9d7830558 100644 --- a/arch/arm64/include/asm/cmpxchg.h +++ b/arch/arm64/include/asm/cmpxchg.h @@ -72,7 +72,12 @@ static inline unsigned long __xchg(unsigned long x, volatile void *ptr, int size } #define xchg(ptr,x) \ - ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr)))) +({ \ + __typeof__(*(ptr)) __ret; \ + __ret = (__typeof__(*(ptr))) \ + __xchg((unsigned long)(x), (ptr), sizeof(*(ptr))); \ + __ret; \ +}) static inline unsigned long __cmpxchg(volatile void *ptr, unsigned long old, unsigned long new, int size) -- cgit v1.2.3 From fa48e6f780a681cdbc7820e33259edfe1a79b9e3 Mon Sep 17 00:00:00 2001 From: Steve Capper Date: Fri, 2 May 2014 14:49:00 +0100 Subject: arm64: mm: Optimise tlb flush logic where we have >4K granule The tlb maintainence functions: __cpu_flush_user_tlb_range and __cpu_flush_kern_tlb_range do not take into consideration the page granule when looping through the address range, and repeatedly flush tlb entries for the same page when operating with 64K pages. This patch re-works the logic s.t. we instead advance the loop by 1 << (PAGE_SHIFT - 12), so avoid repeating ourselves. Also the routines have been converted from assembler to static inline functions to aid with legibility and potential compiler optimisations. The isb() has been removed from flush_tlb_kernel_range(.) as it is only needed when changing the execute permission of a mapping. If one needs to set an area of the kernel as execute/non-execute an isb() must be inserted after the call to flush_tlb_kernel_range. Cc: Laura Abbott Signed-off-by: Steve Capper Acked-by: Will Deacon Signed-off-by: Catalin Marinas --- arch/arm64/include/asm/tlbflush.h | 30 ++++++++++++++--- arch/arm64/mm/Makefile | 2 +- arch/arm64/mm/tlb.S | 71 --------------------------------------- 3 files changed, 26 insertions(+), 77 deletions(-) delete mode 100644 arch/arm64/mm/tlb.S diff --git a/arch/arm64/include/asm/tlbflush.h b/arch/arm64/include/asm/tlbflush.h index 8b482035cfc2..7881d7dbb9ba 100644 --- a/arch/arm64/include/asm/tlbflush.h +++ b/arch/arm64/include/asm/tlbflush.h @@ -98,11 +98,31 @@ static inline void flush_tlb_page(struct vm_area_struct *vma, dsb(); } -/* - * Convert calls to our calling convention. - */ -#define flush_tlb_range(vma,start,end) __cpu_flush_user_tlb_range(start,end,vma) -#define flush_tlb_kernel_range(s,e) __cpu_flush_kern_tlb_range(s,e) +static inline void flush_tlb_range(struct vm_area_struct *vma, + unsigned long start, unsigned long end) +{ + unsigned long asid = (unsigned long)ASID(vma->vm_mm) << 48; + unsigned long addr; + start = asid | (start >> 12); + end = asid | (end >> 12); + + dsb(ishst); + for (addr = start; addr < end; addr += 1 << (PAGE_SHIFT - 12)) + asm("tlbi vae1is, %0" : : "r"(addr)); + dsb(ish); +} + +static inline void flush_tlb_kernel_range(unsigned long start, unsigned long end) +{ + unsigned long addr; + start >>= 12; + end >>= 12; + + dsb(ishst); + for (addr = start; addr < end; addr += 1 << (PAGE_SHIFT - 12)) + asm("tlbi vaae1is, %0" : : "r"(addr)); + dsb(ish); +} /* * On AArch64, the cache coherency is handled via the set_pte_at() function. diff --git a/arch/arm64/mm/Makefile b/arch/arm64/mm/Makefile index b51d36401d83..3ecb56c624d3 100644 --- a/arch/arm64/mm/Makefile +++ b/arch/arm64/mm/Makefile @@ -1,5 +1,5 @@ obj-y := dma-mapping.o extable.o fault.o init.o \ cache.o copypage.o flush.o \ ioremap.o mmap.o pgd.o mmu.o \ - context.o tlb.o proc.o + context.o proc.o obj-$(CONFIG_HUGETLB_PAGE) += hugetlbpage.o diff --git a/arch/arm64/mm/tlb.S b/arch/arm64/mm/tlb.S deleted file mode 100644 index 19da91e0cd27..000000000000 --- a/arch/arm64/mm/tlb.S +++ /dev/null @@ -1,71 +0,0 @@ -/* - * Based on arch/arm/mm/tlb.S - * - * Copyright (C) 1997-2002 Russell King - * Copyright (C) 2012 ARM Ltd. - * Written by Catalin Marinas - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#include -#include -#include -#include -#include -#include "proc-macros.S" - -/* - * __cpu_flush_user_tlb_range(start, end, vma) - * - * Invalidate a range of TLB entries in the specified address space. - * - * - start - start address (may not be aligned) - * - end - end address (exclusive, may not be aligned) - * - vma - vma_struct describing address range - */ -ENTRY(__cpu_flush_user_tlb_range) - vma_vm_mm x3, x2 // get vma->vm_mm - mmid w3, x3 // get vm_mm->context.id - dsb sy - lsr x0, x0, #12 // align address - lsr x1, x1, #12 - bfi x0, x3, #48, #16 // start VA and ASID - bfi x1, x3, #48, #16 // end VA and ASID -1: tlbi vae1is, x0 // TLB invalidate by address and ASID - add x0, x0, #1 - cmp x0, x1 - b.lo 1b - dsb sy - ret -ENDPROC(__cpu_flush_user_tlb_range) - -/* - * __cpu_flush_kern_tlb_range(start,end) - * - * Invalidate a range of kernel TLB entries. - * - * - start - start address (may not be aligned) - * - end - end address (exclusive, may not be aligned) - */ -ENTRY(__cpu_flush_kern_tlb_range) - dsb sy - lsr x0, x0, #12 // align address - lsr x1, x1, #12 -1: tlbi vaae1is, x0 // TLB invalidate by address - add x0, x0, #1 - cmp x0, x1 - b.lo 1b - dsb sy - isb - ret -ENDPROC(__cpu_flush_kern_tlb_range) -- cgit v1.2.3 From 98f7685ee69f871ba991089cb9685f0da07517ea Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Fri, 2 May 2014 16:24:10 +0100 Subject: arm64: barriers: make use of barrier options with explicit barriers When calling our low-level barrier macros directly, we can often suffice with more relaxed behaviour than the default "all accesses, full system" option. This patch updates the users of dsb() to specify the option which they actually require. Acked-by: Catalin Marinas Signed-off-by: Will Deacon Signed-off-by: Catalin Marinas --- arch/arm64/include/asm/barrier.h | 2 +- arch/arm64/include/asm/cacheflush.h | 4 ++-- arch/arm64/include/asm/pgtable.h | 4 ++-- arch/arm64/include/asm/tlbflush.h | 14 +++++++------- arch/arm64/kernel/process.c | 2 +- arch/arm64/kvm/sys_regs.c | 4 ++-- 6 files changed, 15 insertions(+), 15 deletions(-) diff --git a/arch/arm64/include/asm/barrier.h b/arch/arm64/include/asm/barrier.h index 66eb7648043b..5d69eddbe39e 100644 --- a/arch/arm64/include/asm/barrier.h +++ b/arch/arm64/include/asm/barrier.h @@ -28,7 +28,7 @@ #define dmb(opt) asm volatile("dmb sy" : : : "memory") #define dsb(opt) asm volatile("dsb sy" : : : "memory") -#define mb() dsb() +#define mb() dsb(sy) #define rmb() asm volatile("dsb ld" : : : "memory") #define wmb() asm volatile("dsb st" : : : "memory") diff --git a/arch/arm64/include/asm/cacheflush.h b/arch/arm64/include/asm/cacheflush.h index 4c60e64a801c..a5176cf32dad 100644 --- a/arch/arm64/include/asm/cacheflush.h +++ b/arch/arm64/include/asm/cacheflush.h @@ -123,7 +123,7 @@ extern void flush_dcache_page(struct page *); static inline void __flush_icache_all(void) { asm("ic ialluis"); - dsb(); + dsb(ish); } #define flush_dcache_mmap_lock(mapping) \ @@ -150,7 +150,7 @@ static inline void flush_cache_vmap(unsigned long start, unsigned long end) * set_pte_at() called from vmap_pte_range() does not * have a DSB after cleaning the cache line. */ - dsb(); + dsb(ish); } static inline void flush_cache_vunmap(unsigned long start, unsigned long end) diff --git a/arch/arm64/include/asm/pgtable.h b/arch/arm64/include/asm/pgtable.h index 3de4ef8bfd82..e4c60d6e18b8 100644 --- a/arch/arm64/include/asm/pgtable.h +++ b/arch/arm64/include/asm/pgtable.h @@ -303,7 +303,7 @@ extern pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn, static inline void set_pmd(pmd_t *pmdp, pmd_t pmd) { *pmdp = pmd; - dsb(); + dsb(ishst); } static inline void pmd_clear(pmd_t *pmdp) @@ -333,7 +333,7 @@ static inline pte_t *pmd_page_vaddr(pmd_t pmd) static inline void set_pud(pud_t *pudp, pud_t pud) { *pudp = pud; - dsb(); + dsb(ishst); } static inline void pud_clear(pud_t *pudp) diff --git a/arch/arm64/include/asm/tlbflush.h b/arch/arm64/include/asm/tlbflush.h index 7881d7dbb9ba..b9349c4513ea 100644 --- a/arch/arm64/include/asm/tlbflush.h +++ b/arch/arm64/include/asm/tlbflush.h @@ -72,9 +72,9 @@ extern struct cpu_tlb_fns cpu_tlb; */ static inline void flush_tlb_all(void) { - dsb(); + dsb(ishst); asm("tlbi vmalle1is"); - dsb(); + dsb(ish); isb(); } @@ -82,9 +82,9 @@ static inline void flush_tlb_mm(struct mm_struct *mm) { unsigned long asid = (unsigned long)ASID(mm) << 48; - dsb(); + dsb(ishst); asm("tlbi aside1is, %0" : : "r" (asid)); - dsb(); + dsb(ish); } static inline void flush_tlb_page(struct vm_area_struct *vma, @@ -93,9 +93,9 @@ static inline void flush_tlb_page(struct vm_area_struct *vma, unsigned long addr = uaddr >> 12 | ((unsigned long)ASID(vma->vm_mm) << 48); - dsb(); + dsb(ishst); asm("tlbi vae1is, %0" : : "r" (addr)); - dsb(); + dsb(ish); } static inline void flush_tlb_range(struct vm_area_struct *vma, @@ -134,7 +134,7 @@ static inline void update_mmu_cache(struct vm_area_struct *vma, * set_pte() does not have a DSB, so make sure that the page table * write is visible. */ - dsb(); + dsb(ishst); } #define update_mmu_cache_pmd(vma, address, pmd) do { } while (0) diff --git a/arch/arm64/kernel/process.c b/arch/arm64/kernel/process.c index 6391485f342d..f7c446a5e97b 100644 --- a/arch/arm64/kernel/process.c +++ b/arch/arm64/kernel/process.c @@ -300,7 +300,7 @@ struct task_struct *__switch_to(struct task_struct *prev, * Complete any pending TLB or cache maintenance on this CPU in case * the thread migrates to a different CPU. */ - dsb(); + dsb(ish); /* the actual thread switch */ last = cpu_switch_to(prev, next); diff --git a/arch/arm64/kvm/sys_regs.c b/arch/arm64/kvm/sys_regs.c index 03244582bc55..c59a1bdab5eb 100644 --- a/arch/arm64/kvm/sys_regs.c +++ b/arch/arm64/kvm/sys_regs.c @@ -71,13 +71,13 @@ static u32 get_ccsidr(u32 csselr) static void do_dc_cisw(u32 val) { asm volatile("dc cisw, %x0" : : "r" (val)); - dsb(); + dsb(ish); } static void do_dc_csw(u32 val) { asm volatile("dc csw, %x0" : : "r" (val)); - dsb(); + dsb(ish); } /* See note at ARM ARM B1.14.4 */ -- cgit v1.2.3 From 493e68747e07b69da3d746352525a1ebd6b61d82 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Fri, 2 May 2014 16:24:11 +0100 Subject: arm64: barriers: wire up new barrier options Now that all callers of the barrier macros are updated to pass the mandatory options, update the macros so the option is actually used. Acked-by: Catalin Marinas Signed-off-by: Will Deacon Signed-off-by: Catalin Marinas --- arch/arm64/include/asm/barrier.h | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/arch/arm64/include/asm/barrier.h b/arch/arm64/include/asm/barrier.h index 5d69eddbe39e..71a42d6599fb 100644 --- a/arch/arm64/include/asm/barrier.h +++ b/arch/arm64/include/asm/barrier.h @@ -25,12 +25,12 @@ #define wfi() asm volatile("wfi" : : : "memory") #define isb() asm volatile("isb" : : : "memory") -#define dmb(opt) asm volatile("dmb sy" : : : "memory") -#define dsb(opt) asm volatile("dsb sy" : : : "memory") +#define dmb(opt) asm volatile("dmb " #opt : : : "memory") +#define dsb(opt) asm volatile("dsb " #opt : : : "memory") #define mb() dsb(sy) -#define rmb() asm volatile("dsb ld" : : : "memory") -#define wmb() asm volatile("dsb st" : : : "memory") +#define rmb() dsb(ld) +#define wmb() dsb(st) #ifndef CONFIG_SMP #define smp_mb() barrier() @@ -54,9 +54,9 @@ do { \ #else -#define smp_mb() asm volatile("dmb ish" : : : "memory") -#define smp_rmb() asm volatile("dmb ishld" : : : "memory") -#define smp_wmb() asm volatile("dmb ishst" : : : "memory") +#define smp_mb() dmb(ish) +#define smp_rmb() dmb(ishld) +#define smp_wmb() dmb(ishst) #define smp_store_release(p, v) \ do { \ -- cgit v1.2.3 From be6209a6107e0f63544e3e7d00fd5c95434ec80a Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Fri, 2 May 2014 16:24:12 +0100 Subject: arm64: barriers: use barrier() instead of smp_mb() when !SMP The recently introduced acquire/release accessors refer to smp_mb() in the !CONFIG_SMP case. This is confusing when reading the code, so use barrier() directly when we know we're UP. Acked-by: Catalin Marinas Signed-off-by: Will Deacon Signed-off-by: Catalin Marinas --- arch/arm64/include/asm/barrier.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm64/include/asm/barrier.h b/arch/arm64/include/asm/barrier.h index 71a42d6599fb..709f1f6d6bbd 100644 --- a/arch/arm64/include/asm/barrier.h +++ b/arch/arm64/include/asm/barrier.h @@ -40,7 +40,7 @@ #define smp_store_release(p, v) \ do { \ compiletime_assert_atomic_type(*p); \ - smp_mb(); \ + barrier(); \ ACCESS_ONCE(*p) = (v); \ } while (0) @@ -48,7 +48,7 @@ do { \ ({ \ typeof(*p) ___p1 = ACCESS_ONCE(*p); \ compiletime_assert_atomic_type(*p); \ - smp_mb(); \ + barrier(); \ ___p1; \ }) -- cgit v1.2.3 From d0488597a1b7105957b6d7d1bb0b6ee88aa51b37 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Fri, 2 May 2014 16:24:13 +0100 Subject: arm64: head: fix cache flushing and barriers in set_cpu_boot_mode_flag set_cpu_boot_mode_flag is used to identify which exception levels are encountered across the system by CPUs trying to enter the kernel. The basic algorithm is: if a CPU is booting at EL2, it will set a flag at an offset of #4 from __boot_cpu_mode, a cacheline-aligned variable. Otherwise, a flag is set at an offset of zero into the same cacheline. This enables us to check that all CPUs booted at the same exception level. This cacheline is written with the stage-1 MMU off (that is, via a strongly-ordered mapping) and will bypass any clean lines in the cache, leading to potential coherence problems when the variable is later checked via the normal, cacheable mapping of the kernel image. This patch reworks the broken flushing code so that we: (1) Use a DMB to order the strongly-ordered write of the cacheline against the subsequent cache-maintenance operation (by-VA operations only hazard against normal, cacheable accesses). (2) Use a single dc ivac instruction to invalidate any clean lines containing a stale copy of the line after it has been updated. Acked-by: Catalin Marinas Signed-off-by: Will Deacon Signed-off-by: Catalin Marinas --- arch/arm64/kernel/head.S | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) diff --git a/arch/arm64/kernel/head.S b/arch/arm64/kernel/head.S index 0fd565000772..b96a732e4859 100644 --- a/arch/arm64/kernel/head.S +++ b/arch/arm64/kernel/head.S @@ -230,11 +230,9 @@ ENTRY(set_cpu_boot_mode_flag) cmp w20, #BOOT_CPU_MODE_EL2 b.ne 1f add x1, x1, #4 -1: dc cvac, x1 // Clean potentially dirty cache line - dsb sy - str w20, [x1] // This CPU has booted in EL1 - dc civac, x1 // Clean&invalidate potentially stale cache line - dsb sy +1: str w20, [x1] // This CPU has booted in EL1 + dmb sy + dc ivac, x1 // Invalidate potentially stale cache line ret ENDPROC(set_cpu_boot_mode_flag) -- cgit v1.2.3 From ee9e101c11478680d579bd20bb38a4d3e2514fe3 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Fri, 2 May 2014 16:24:14 +0100 Subject: arm64: kvm: use inner-shareable barriers for inner-shareable maintenance In order to ensure completion of inner-shareable maintenance instructions (cache and TLB) on AArch64, we can use the -ish suffix to the dsb instruction. This patch relaxes our dsb sy instructions to dsb ish where possible. Acked-by: Catalin Marinas Acked-by: Marc Zyngier Signed-off-by: Will Deacon Signed-off-by: Catalin Marinas --- arch/arm64/kvm/hyp.S | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) diff --git a/arch/arm64/kvm/hyp.S b/arch/arm64/kvm/hyp.S index 2c56012cb2d2..b0d1512acf08 100644 --- a/arch/arm64/kvm/hyp.S +++ b/arch/arm64/kvm/hyp.S @@ -630,9 +630,15 @@ ENTRY(__kvm_tlb_flush_vmid_ipa) * whole of Stage-1. Weep... */ tlbi ipas2e1is, x1 - dsb sy + /* + * We have to ensure completion of the invalidation at Stage-2, + * since a table walk on another CPU could refill a TLB with a + * complete (S1 + S2) walk based on the old Stage-2 mapping if + * the Stage-1 invalidation happened first. + */ + dsb ish tlbi vmalle1is - dsb sy + dsb ish isb msr vttbr_el2, xzr @@ -643,7 +649,7 @@ ENTRY(__kvm_flush_vm_context) dsb ishst tlbi alle1is ic ialluis - dsb sy + dsb ish ret ENDPROC(__kvm_flush_vm_context) -- cgit v1.2.3 From dc60b777fcdddbadab111028e266fd69d4702b34 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Fri, 2 May 2014 16:24:15 +0100 Subject: arm64: mm: use inner-shareable barriers for inner-shareable maintenance In order to ensure ordering and completion of inner-shareable maintenance instructions (cache and TLB) on AArch64, we can use the -ish suffix to the dmb and dsb instructions respectively. This patch updates our low-level cache and tlb maintenance routines to use the inner-shareable barrier variants where appropriate. Acked-by: Catalin Marinas Signed-off-by: Will Deacon Signed-off-by: Catalin Marinas --- arch/arm64/mm/cache.S | 6 +++--- arch/arm64/mm/proc.S | 2 +- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/arm64/mm/cache.S b/arch/arm64/mm/cache.S index fda756875fa6..23663837acff 100644 --- a/arch/arm64/mm/cache.S +++ b/arch/arm64/mm/cache.S @@ -31,7 +31,7 @@ * Corrupted registers: x0-x7, x9-x11 */ __flush_dcache_all: - dsb sy // ensure ordering with previous memory accesses + dmb sy // ensure ordering with previous memory accesses mrs x0, clidr_el1 // read clidr and x3, x0, #0x7000000 // extract loc from clidr lsr x3, x3, #23 // left align loc bit field @@ -128,7 +128,7 @@ USER(9f, dc cvau, x4 ) // clean D line to PoU add x4, x4, x2 cmp x4, x1 b.lo 1b - dsb sy + dsb ish icache_line_size x2, x3 sub x3, x2, #1 @@ -139,7 +139,7 @@ USER(9f, ic ivau, x4 ) // invalidate I line PoU cmp x4, x1 b.lo 1b 9: // ignore any faulting cache operation - dsb sy + dsb ish isb ret ENDPROC(flush_icache_range) diff --git a/arch/arm64/mm/proc.S b/arch/arm64/mm/proc.S index 9042aff5e9e3..7736779c9809 100644 --- a/arch/arm64/mm/proc.S +++ b/arch/arm64/mm/proc.S @@ -182,7 +182,7 @@ ENDPROC(cpu_do_switch_mm) ENTRY(__cpu_setup) ic iallu // I+BTB cache invalidate tlbi vmalle1is // invalidate I + D TLBs - dsb sy + dsb ish mov x0, #3 << 20 msr cpacr_el1, x0 // Enable FP/ASIMD -- cgit v1.2.3 From 2a2830703a2371b47f7b50b1d35cb15dc0e2b717 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Tue, 29 Apr 2014 19:04:06 +0100 Subject: arm64: debug: avoid accessing mdscr_el1 on fault paths where possible Since mdscr_el1 is part of the debug register group, it is highly likely to be trapped by a hypervisor to prevent virtual machines from debugging (buggering?) each other. Unfortunately, this absolutely destroys our performance, since we access the register on many of our low-level fault handling paths to keep track of the various debug state machines. This patch removes our dependency on mdscr_el1 in the case that debugging is not being used. More specifically we: - Use TIF_SINGLESTEP to indicate that a task is stepping at EL0 and avoid disabling step in the MDSCR when we don't need to. MDSCR_EL1.SS handling is moved to kernel_entry, when trapping from userspace. - Ensure debug exceptions are re-enabled on *all* exception entry paths, even the debug exception handling path (where we re-enable exceptions after invoking the handler). Since we can now rely on MDSCR_EL1.SS being cleared by the entry code, exception handlers can usually enable debug immediately before enabling interrupts. - Remove all debug exception unmasking from ret_to_user and el1_preempt, since we will never get here with debug exceptions masked. This results in a slight change to kernel debug behaviour, where we now step into interrupt handlers and data aborts from EL1 when debugging the kernel, which is actually a useful thing to do. A side-effect of this is that it *does* potentially prevent stepping off {break,watch}points when there is a high-frequency interrupt source (e.g. a timer), so a debugger would need to use either breakpoints or manually disable interrupts to get around this issue. With this patch applied, guest performance is restored under KVM when debug register accesses are trapped (and we get a measurable performance increase on the host on Cortex-A57 too). Cc: Ian Campbell Tested-by: Marc Zyngier Signed-off-by: Will Deacon Signed-off-by: Catalin Marinas --- arch/arm64/include/asm/assembler.h | 23 ++++++++---- arch/arm64/kernel/entry.S | 73 ++++++++++++++------------------------ 2 files changed, 42 insertions(+), 54 deletions(-) diff --git a/arch/arm64/include/asm/assembler.h b/arch/arm64/include/asm/assembler.h index fd3e3924041b..5901480bfdca 100644 --- a/arch/arm64/include/asm/assembler.h +++ b/arch/arm64/include/asm/assembler.h @@ -21,6 +21,7 @@ #endif #include +#include /* * Stack pushing/popping (register pairs only). Equivalent to store decrement @@ -68,23 +69,31 @@ msr daifclr, #8 .endm - .macro disable_step, tmp + .macro disable_step_tsk, flgs, tmp + tbz \flgs, #TIF_SINGLESTEP, 9990f mrs \tmp, mdscr_el1 bic \tmp, \tmp, #1 msr mdscr_el1, \tmp + isb // Synchronise with enable_dbg +9990: .endm - .macro enable_step, tmp + .macro enable_step_tsk, flgs, tmp + tbz \flgs, #TIF_SINGLESTEP, 9990f + disable_dbg mrs \tmp, mdscr_el1 orr \tmp, \tmp, #1 msr mdscr_el1, \tmp +9990: .endm - .macro enable_dbg_if_not_stepping, tmp - mrs \tmp, mdscr_el1 - tbnz \tmp, #0, 9990f - enable_dbg -9990: +/* + * Enable both debug exceptions and interrupts. This is likely to be + * faster than two daifclr operations, since writes to this register + * are self-synchronising. + */ + .macro enable_dbg_and_irq + msr daifclr, #(8 | 2) .endm /* diff --git a/arch/arm64/kernel/entry.S b/arch/arm64/kernel/entry.S index 39ac630d83de..e8b23a3b68d0 100644 --- a/arch/arm64/kernel/entry.S +++ b/arch/arm64/kernel/entry.S @@ -60,6 +60,9 @@ push x0, x1 .if \el == 0 mrs x21, sp_el0 + get_thread_info tsk // Ensure MDSCR_EL1.SS is clear, + ldr x19, [tsk, #TI_FLAGS] // since we can unmask debug + disable_step_tsk x19, x20 // exceptions when scheduling. .else add x21, sp, #S_FRAME_SIZE .endif @@ -259,7 +262,7 @@ el1_da: * Data abort handling */ mrs x0, far_el1 - enable_dbg_if_not_stepping x2 + enable_dbg // re-enable interrupts if they were enabled in the aborted context tbnz x23, #7, 1f // PSR_I_BIT enable_irq @@ -275,6 +278,7 @@ el1_sp_pc: * Stack or PC alignment exception handling */ mrs x0, far_el1 + enable_dbg mov x1, x25 mov x2, sp b do_sp_pc_abort @@ -282,6 +286,7 @@ el1_undef: /* * Undefined instruction */ + enable_dbg mov x0, sp b do_undefinstr el1_dbg: @@ -294,10 +299,11 @@ el1_dbg: mrs x0, far_el1 mov x2, sp // struct pt_regs bl do_debug_exception - + enable_dbg kernel_exit 1 el1_inv: // TODO: add support for undefined instructions in kernel mode + enable_dbg mov x0, sp mov x1, #BAD_SYNC mrs x2, esr_el1 @@ -307,7 +313,7 @@ ENDPROC(el1_sync) .align 6 el1_irq: kernel_entry 1 - enable_dbg_if_not_stepping x0 + enable_dbg #ifdef CONFIG_TRACE_IRQFLAGS bl trace_hardirqs_off #endif @@ -332,8 +338,7 @@ ENDPROC(el1_irq) #ifdef CONFIG_PREEMPT el1_preempt: mov x24, lr -1: enable_dbg - bl preempt_schedule_irq // irq en/disable is done inside +1: bl preempt_schedule_irq // irq en/disable is done inside ldr x0, [tsk, #TI_FLAGS] // get new tasks TI_FLAGS tbnz x0, #TIF_NEED_RESCHED, 1b // needs rescheduling? ret x24 @@ -349,7 +354,7 @@ el0_sync: lsr x24, x25, #ESR_EL1_EC_SHIFT // exception class cmp x24, #ESR_EL1_EC_SVC64 // SVC in 64-bit state b.eq el0_svc - adr lr, ret_from_exception + adr lr, ret_to_user cmp x24, #ESR_EL1_EC_DABT_EL0 // data abort in EL0 b.eq el0_da cmp x24, #ESR_EL1_EC_IABT_EL0 // instruction abort in EL0 @@ -378,7 +383,7 @@ el0_sync_compat: lsr x24, x25, #ESR_EL1_EC_SHIFT // exception class cmp x24, #ESR_EL1_EC_SVC32 // SVC in 32-bit state b.eq el0_svc_compat - adr lr, ret_from_exception + adr lr, ret_to_user cmp x24, #ESR_EL1_EC_DABT_EL0 // data abort in EL0 b.eq el0_da cmp x24, #ESR_EL1_EC_IABT_EL0 // instruction abort in EL0 @@ -423,11 +428,8 @@ el0_da: */ mrs x0, far_el1 bic x0, x0, #(0xff << 56) - disable_step x1 - isb - enable_dbg // enable interrupts before calling the main handler - enable_irq + enable_dbg_and_irq mov x1, x25 mov x2, sp b do_mem_abort @@ -436,11 +438,8 @@ el0_ia: * Instruction abort handling */ mrs x0, far_el1 - disable_step x1 - isb - enable_dbg // enable interrupts before calling the main handler - enable_irq + enable_dbg_and_irq orr x1, x25, #1 << 24 // use reserved ISS bit for instruction aborts mov x2, sp b do_mem_abort @@ -448,6 +447,7 @@ el0_fpsimd_acc: /* * Floating Point or Advanced SIMD access */ + enable_dbg mov x0, x25 mov x1, sp b do_fpsimd_acc @@ -455,6 +455,7 @@ el0_fpsimd_exc: /* * Floating Point or Advanced SIMD exception */ + enable_dbg mov x0, x25 mov x1, sp b do_fpsimd_exc @@ -463,11 +464,8 @@ el0_sp_pc: * Stack or PC alignment exception handling */ mrs x0, far_el1 - disable_step x1 - isb - enable_dbg // enable interrupts before calling the main handler - enable_irq + enable_dbg_and_irq mov x1, x25 mov x2, sp b do_sp_pc_abort @@ -475,9 +473,9 @@ el0_undef: /* * Undefined instruction */ - mov x0, sp // enable interrupts before calling the main handler - enable_irq + enable_dbg_and_irq + mov x0, sp b do_undefinstr el0_dbg: /* @@ -485,11 +483,13 @@ el0_dbg: */ tbnz x24, #0, el0_inv // EL0 only mrs x0, far_el1 - disable_step x1 mov x1, x25 mov x2, sp - b do_debug_exception + bl do_debug_exception + enable_dbg + b ret_to_user el0_inv: + enable_dbg mov x0, sp mov x1, #BAD_SYNC mrs x2, esr_el1 @@ -500,15 +500,12 @@ ENDPROC(el0_sync) el0_irq: kernel_entry 0 el0_irq_naked: - disable_step x1 - isb enable_dbg #ifdef CONFIG_TRACE_IRQFLAGS bl trace_hardirqs_off #endif irq_handler - get_thread_info tsk #ifdef CONFIG_TRACE_IRQFLAGS bl trace_hardirqs_on @@ -516,14 +513,6 @@ el0_irq_naked: b ret_to_user ENDPROC(el0_irq) -/* - * This is the return code to user mode for abort handlers - */ -ret_from_exception: - get_thread_info tsk - b ret_to_user -ENDPROC(ret_from_exception) - /* * Register switch for AArch64. The callee-saved registers need to be saved * and restored. On entry: @@ -563,10 +552,7 @@ ret_fast_syscall: ldr x1, [tsk, #TI_FLAGS] and x2, x1, #_TIF_WORK_MASK cbnz x2, fast_work_pending - tbz x1, #TIF_SINGLESTEP, fast_exit - disable_dbg - enable_step x2 -fast_exit: + enable_step_tsk x1, x2 kernel_exit 0, ret = 1 /* @@ -585,7 +571,6 @@ work_pending: bl do_notify_resume b ret_to_user work_resched: - enable_dbg bl schedule /* @@ -596,9 +581,7 @@ ret_to_user: ldr x1, [tsk, #TI_FLAGS] and x2, x1, #_TIF_WORK_MASK cbnz x2, work_pending - tbz x1, #TIF_SINGLESTEP, no_work_pending - disable_dbg - enable_step x2 + enable_step_tsk x1, x2 no_work_pending: kernel_exit 0, ret = 0 ENDPROC(ret_to_user) @@ -625,12 +608,8 @@ el0_svc: mov sc_nr, #__NR_syscalls el0_svc_naked: // compat entry point stp x0, scno, [sp, #S_ORIG_X0] // save the original x0 and syscall number - disable_step x16 - isb - enable_dbg - enable_irq + enable_dbg_and_irq - get_thread_info tsk ldr x16, [tsk, #TI_FLAGS] // check for syscall tracing tbnz x16, #TIF_SYSCALL_TRACE, __sys_trace // are we tracing syscalls? adr lr, ret_fast_syscall // return address -- cgit v1.2.3 From 449f81a4da4d99980064943d504bb19d07e86aec Mon Sep 17 00:00:00 2001 From: AKASHI Takahiro Date: Wed, 30 Apr 2014 10:51:29 +0100 Subject: arm64: make a single hook to syscall_trace() for all syscall features Currently syscall_trace() is called only for ptrace. With additional TIF_xx flags defined, it is now called in all the cases of audit, ftrace and seccomp in addition to ptrace. Acked-by: Richard Guy Briggs Acked-by: Will Deacon Signed-off-by: AKASHI Takahiro Signed-off-by: Will Deacon Signed-off-by: Catalin Marinas --- arch/arm64/include/asm/thread_info.h | 13 +++++++++++++ arch/arm64/kernel/entry.S | 5 +++-- 2 files changed, 16 insertions(+), 2 deletions(-) diff --git a/arch/arm64/include/asm/thread_info.h b/arch/arm64/include/asm/thread_info.h index 720e70b66ffd..0a8b2a97a32e 100644 --- a/arch/arm64/include/asm/thread_info.h +++ b/arch/arm64/include/asm/thread_info.h @@ -91,6 +91,9 @@ static inline struct thread_info *current_thread_info(void) /* * thread information flags: * TIF_SYSCALL_TRACE - syscall trace active + * TIF_SYSCALL_TRACEPOINT - syscall tracepoint for ftrace + * TIF_SYSCALL_AUDIT - syscall auditing + * TIF_SECOMP - syscall secure computing * TIF_SIGPENDING - signal pending * TIF_NEED_RESCHED - rescheduling necessary * TIF_NOTIFY_RESUME - callback before returning to user @@ -101,6 +104,9 @@ static inline struct thread_info *current_thread_info(void) #define TIF_NEED_RESCHED 1 #define TIF_NOTIFY_RESUME 2 /* callback before returning to user */ #define TIF_SYSCALL_TRACE 8 +#define TIF_SYSCALL_AUDIT 9 +#define TIF_SYSCALL_TRACEPOINT 10 +#define TIF_SECCOMP 11 #define TIF_POLLING_NRFLAG 16 #define TIF_MEMDIE 18 /* is terminating due to OOM killer */ #define TIF_FREEZE 19 @@ -112,10 +118,17 @@ static inline struct thread_info *current_thread_info(void) #define _TIF_SIGPENDING (1 << TIF_SIGPENDING) #define _TIF_NEED_RESCHED (1 << TIF_NEED_RESCHED) #define _TIF_NOTIFY_RESUME (1 << TIF_NOTIFY_RESUME) +#define _TIF_SYSCALL_TRACE (1 << TIF_SYSCALL_TRACE) +#define _TIF_SYSCALL_AUDIT (1 << TIF_SYSCALL_AUDIT) +#define _TIF_SYSCALL_TRACEPOINT (1 << TIF_SYSCALL_TRACEPOINT) +#define _TIF_SECCOMP (1 << TIF_SECCOMP) #define _TIF_32BIT (1 << TIF_32BIT) #define _TIF_WORK_MASK (_TIF_NEED_RESCHED | _TIF_SIGPENDING | \ _TIF_NOTIFY_RESUME) +#define _TIF_SYSCALL_WORK (_TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT | \ + _TIF_SYSCALL_TRACEPOINT | _TIF_SECCOMP) + #endif /* __KERNEL__ */ #endif /* __ASM_THREAD_INFO_H */ diff --git a/arch/arm64/kernel/entry.S b/arch/arm64/kernel/entry.S index e8b23a3b68d0..be95f3544ce4 100644 --- a/arch/arm64/kernel/entry.S +++ b/arch/arm64/kernel/entry.S @@ -610,8 +610,9 @@ el0_svc_naked: // compat entry point stp x0, scno, [sp, #S_ORIG_X0] // save the original x0 and syscall number enable_dbg_and_irq - ldr x16, [tsk, #TI_FLAGS] // check for syscall tracing - tbnz x16, #TIF_SYSCALL_TRACE, __sys_trace // are we tracing syscalls? + ldr x16, [tsk, #TI_FLAGS] // check for syscall hooks + tst x16, #_TIF_SYSCALL_WORK + b.ne __sys_trace adr lr, ret_fast_syscall // return address cmp scno, sc_nr // check upper syscall limit b.hs ni_sys -- cgit v1.2.3 From 3157858feff89196635b01495d5ec9ebe206639e Mon Sep 17 00:00:00 2001 From: AKASHI Takahiro Date: Wed, 30 Apr 2014 10:51:30 +0100 Subject: arm64: split syscall_trace() into separate functions for enter/exit As done in arm, this change makes it easy to confirm we invoke syscall related hooks, including syscall tracepoint, audit and seccomp which would be implemented later, in correct order. That is, undoing operations in the opposite order on exit that they were done on entry. Acked-by: Will Deacon Signed-off-by: AKASHI Takahiro Signed-off-by: Will Deacon Signed-off-by: Catalin Marinas --- arch/arm64/kernel/entry.S | 10 ++++------ arch/arm64/kernel/ptrace.c | 50 +++++++++++++++++++++++++++------------------- 2 files changed, 33 insertions(+), 27 deletions(-) diff --git a/arch/arm64/kernel/entry.S b/arch/arm64/kernel/entry.S index be95f3544ce4..a670d0a98c89 100644 --- a/arch/arm64/kernel/entry.S +++ b/arch/arm64/kernel/entry.S @@ -628,9 +628,8 @@ ENDPROC(el0_svc) * switches, and waiting for our parent to respond. */ __sys_trace: - mov x1, sp - mov w0, #0 // trace entry - bl syscall_trace + mov x0, sp + bl syscall_trace_enter adr lr, __sys_trace_return // return address uxtw scno, w0 // syscall number (possibly new) mov x1, sp // pointer to regs @@ -645,9 +644,8 @@ __sys_trace: __sys_trace_return: str x0, [sp] // save returned x0 - mov x1, sp - mov w0, #1 // trace exit - bl syscall_trace + mov x0, sp + bl syscall_trace_exit b ret_to_user /* diff --git a/arch/arm64/kernel/ptrace.c b/arch/arm64/kernel/ptrace.c index 6a8928bba03c..6d666dc1cea6 100644 --- a/arch/arm64/kernel/ptrace.c +++ b/arch/arm64/kernel/ptrace.c @@ -1058,35 +1058,43 @@ long arch_ptrace(struct task_struct *child, long request, return ptrace_request(child, request, addr, data); } -asmlinkage int syscall_trace(int dir, struct pt_regs *regs) +enum ptrace_syscall_dir { + PTRACE_SYSCALL_ENTER = 0, + PTRACE_SYSCALL_EXIT, +}; + +static void tracehook_report_syscall(struct pt_regs *regs, + enum ptrace_syscall_dir dir) { + int regno; unsigned long saved_reg; - if (!test_thread_flag(TIF_SYSCALL_TRACE)) - return regs->syscallno; - - if (is_compat_task()) { - /* AArch32 uses ip (r12) for scratch */ - saved_reg = regs->regs[12]; - regs->regs[12] = dir; - } else { - /* - * Save X7. X7 is used to denote syscall entry/exit: - * X7 = 0 -> entry, = 1 -> exit - */ - saved_reg = regs->regs[7]; - regs->regs[7] = dir; - } + /* + * A scratch register (ip(r12) on AArch32, x7 on AArch64) is + * used to denote syscall entry/exit: + */ + regno = (is_compat_task() ? 12 : 7); + saved_reg = regs->regs[regno]; + regs->regs[regno] = dir; - if (dir) + if (dir == PTRACE_SYSCALL_EXIT) tracehook_report_syscall_exit(regs, 0); else if (tracehook_report_syscall_entry(regs)) regs->syscallno = ~0UL; - if (is_compat_task()) - regs->regs[12] = saved_reg; - else - regs->regs[7] = saved_reg; + regs->regs[regno] = saved_reg; +} + +asmlinkage int syscall_trace_enter(struct pt_regs *regs) +{ + if (test_thread_flag(TIF_SYSCALL_TRACE)) + tracehook_report_syscall(regs, PTRACE_SYSCALL_ENTER); return regs->syscallno; } + +asmlinkage void syscall_trace_exit(struct pt_regs *regs) +{ + if (test_thread_flag(TIF_SYSCALL_TRACE)) + tracehook_report_syscall(regs, PTRACE_SYSCALL_EXIT); +} -- cgit v1.2.3 From d34a3ebd8d25cf691a94fae66a957a480cf46430 Mon Sep 17 00:00:00 2001 From: AKASHI Takahiro Date: Wed, 30 Apr 2014 10:51:31 +0100 Subject: arm64: Add regs_return_value() in syscall.h This macro, regs_return_value, is used mainly for audit to record system call's results, but may also be used in test_kprobes.c. Acked-by: Will Deacon Acked-by: Richard Guy Briggs Signed-off-by: AKASHI Takahiro Signed-off-by: Will Deacon Signed-off-by: Catalin Marinas --- arch/arm64/include/asm/ptrace.h | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/arch/arm64/include/asm/ptrace.h b/arch/arm64/include/asm/ptrace.h index c7ba261dd4b3..a429b5940be2 100644 --- a/arch/arm64/include/asm/ptrace.h +++ b/arch/arm64/include/asm/ptrace.h @@ -135,6 +135,11 @@ struct pt_regs { #define user_stack_pointer(regs) \ (!compat_user_mode(regs)) ? ((regs)->sp) : ((regs)->compat_sp) +static inline unsigned long regs_return_value(struct pt_regs *regs) +{ + return regs->regs[0]; +} + /* * Are the current registers suitable for user mode? (used to maintain * security in signal handlers) -- cgit v1.2.3 From fd92d4a54a069953b4679958121317f2a25389cd Mon Sep 17 00:00:00 2001 From: AKASHI Takahiro Date: Wed, 30 Apr 2014 10:51:32 +0100 Subject: arm64: is_compat_task is defined both in asm/compat.h and linux/compat.h Some kernel files may include both linux/compat.h and asm/compat.h directly or indirectly. Since both header files contain is_compat_task() under !CONFIG_COMPAT, compiling them with !CONFIG_COMPAT will eventually fail. Such files include kernel/auditsc.c, kernel/seccomp.c and init/do_mountfs.c (do_mountfs.c may read asm/compat.h via asm/ftrace.h once ftrace is implemented). So this patch proactively 1) removes is_compat_task() under !CONFIG_COMPAT from asm/compat.h 2) replaces asm/compat.h to linux/compat.h in kernel/*.c, but asm/compat.h is still necessary in ptrace.c and process.c because they use is_compat_thread(). Acked-by: Will Deacon Signed-off-by: AKASHI Takahiro Signed-off-by: Will Deacon Signed-off-by: Catalin Marinas --- arch/arm64/include/asm/compat.h | 5 ----- arch/arm64/kernel/hw_breakpoint.c | 2 +- arch/arm64/kernel/process.c | 1 + arch/arm64/kernel/ptrace.c | 1 + arch/arm64/kernel/signal.c | 2 +- 5 files changed, 4 insertions(+), 7 deletions(-) diff --git a/arch/arm64/include/asm/compat.h b/arch/arm64/include/asm/compat.h index e71f81fe127a..253e33bc94fb 100644 --- a/arch/arm64/include/asm/compat.h +++ b/arch/arm64/include/asm/compat.h @@ -305,11 +305,6 @@ static inline int is_compat_thread(struct thread_info *thread) #else /* !CONFIG_COMPAT */ -static inline int is_compat_task(void) -{ - return 0; -} - static inline int is_compat_thread(struct thread_info *thread) { return 0; diff --git a/arch/arm64/kernel/hw_breakpoint.c b/arch/arm64/kernel/hw_breakpoint.c index bee789757806..df1cf15377b4 100644 --- a/arch/arm64/kernel/hw_breakpoint.c +++ b/arch/arm64/kernel/hw_breakpoint.c @@ -20,6 +20,7 @@ #define pr_fmt(fmt) "hw-breakpoint: " fmt +#include #include #include #include @@ -27,7 +28,6 @@ #include #include -#include #include #include #include diff --git a/arch/arm64/kernel/process.c b/arch/arm64/kernel/process.c index f7c446a5e97b..d04eb871cb0e 100644 --- a/arch/arm64/kernel/process.c +++ b/arch/arm64/kernel/process.c @@ -20,6 +20,7 @@ #include +#include #include #include #include diff --git a/arch/arm64/kernel/ptrace.c b/arch/arm64/kernel/ptrace.c index 6d666dc1cea6..4b58e812cf67 100644 --- a/arch/arm64/kernel/ptrace.c +++ b/arch/arm64/kernel/ptrace.c @@ -19,6 +19,7 @@ * along with this program. If not, see . */ +#include #include #include #include diff --git a/arch/arm64/kernel/signal.c b/arch/arm64/kernel/signal.c index dc2ab1b0ac0d..2ba72a11629f 100644 --- a/arch/arm64/kernel/signal.c +++ b/arch/arm64/kernel/signal.c @@ -17,6 +17,7 @@ * along with this program. If not, see . */ +#include #include #include #include @@ -25,7 +26,6 @@ #include #include -#include #include #include #include -- cgit v1.2.3 From 2c98833a42cd194ba0f537cd21917e15e5593715 Mon Sep 17 00:00:00 2001 From: Ard Biesheuvel Date: Thu, 6 Mar 2014 16:23:33 +0800 Subject: arm64/crypto: SHA-1 using ARMv8 Crypto Extensions This patch adds support for the SHA-1 Secure Hash Algorithm for CPUs that have support for the SHA-1 part of the ARM v8 Crypto Extensions. Signed-off-by: Ard Biesheuvel Acked-by: Herbert Xu --- arch/arm64/Kconfig | 3 + arch/arm64/Makefile | 1 + arch/arm64/crypto/Kconfig | 16 ++++ arch/arm64/crypto/Makefile | 12 +++ arch/arm64/crypto/sha1-ce-core.S | 153 ++++++++++++++++++++++++++++++++++ arch/arm64/crypto/sha1-ce-glue.c | 174 +++++++++++++++++++++++++++++++++++++++ 6 files changed, 359 insertions(+) create mode 100644 arch/arm64/crypto/Kconfig create mode 100644 arch/arm64/crypto/Makefile create mode 100644 arch/arm64/crypto/sha1-ce-core.S create mode 100644 arch/arm64/crypto/sha1-ce-glue.c diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig index e6e4d3749a6e..1cefc6fe969a 100644 --- a/arch/arm64/Kconfig +++ b/arch/arm64/Kconfig @@ -342,5 +342,8 @@ source "arch/arm64/Kconfig.debug" source "security/Kconfig" source "crypto/Kconfig" +if CRYPTO +source "arch/arm64/crypto/Kconfig" +endif source "lib/Kconfig" diff --git a/arch/arm64/Makefile b/arch/arm64/Makefile index 2fceb71ac3b7..8185a913c5ed 100644 --- a/arch/arm64/Makefile +++ b/arch/arm64/Makefile @@ -45,6 +45,7 @@ export TEXT_OFFSET GZFLAGS core-y += arch/arm64/kernel/ arch/arm64/mm/ core-$(CONFIG_KVM) += arch/arm64/kvm/ core-$(CONFIG_XEN) += arch/arm64/xen/ +core-$(CONFIG_CRYPTO) += arch/arm64/crypto/ libs-y := arch/arm64/lib/ $(libs-y) libs-y += $(LIBGCC) diff --git a/arch/arm64/crypto/Kconfig b/arch/arm64/crypto/Kconfig new file mode 100644 index 000000000000..7956881b5986 --- /dev/null +++ b/arch/arm64/crypto/Kconfig @@ -0,0 +1,16 @@ + +menuconfig ARM64_CRYPTO + bool "ARM64 Accelerated Cryptographic Algorithms" + depends on ARM64 + help + Say Y here to choose from a selection of cryptographic algorithms + implemented using ARM64 specific CPU features or instructions. + +if ARM64_CRYPTO + +config CRYPTO_SHA1_ARM64_CE + tristate "SHA-1 digest algorithm (ARMv8 Crypto Extensions)" + depends on ARM64 && KERNEL_MODE_NEON + select CRYPTO_HASH + +endif diff --git a/arch/arm64/crypto/Makefile b/arch/arm64/crypto/Makefile new file mode 100644 index 000000000000..0ed3caaec81b --- /dev/null +++ b/arch/arm64/crypto/Makefile @@ -0,0 +1,12 @@ +# +# linux/arch/arm64/crypto/Makefile +# +# Copyright (C) 2014 Linaro Ltd +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License version 2 as +# published by the Free Software Foundation. +# + +obj-$(CONFIG_CRYPTO_SHA1_ARM64_CE) += sha1-ce.o +sha1-ce-y := sha1-ce-glue.o sha1-ce-core.o diff --git a/arch/arm64/crypto/sha1-ce-core.S b/arch/arm64/crypto/sha1-ce-core.S new file mode 100644 index 000000000000..09d57d98609c --- /dev/null +++ b/arch/arm64/crypto/sha1-ce-core.S @@ -0,0 +1,153 @@ +/* + * sha1-ce-core.S - SHA-1 secure hash using ARMv8 Crypto Extensions + * + * Copyright (C) 2014 Linaro Ltd + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include + + .text + .arch armv8-a+crypto + + k0 .req v0 + k1 .req v1 + k2 .req v2 + k3 .req v3 + + t0 .req v4 + t1 .req v5 + + dga .req q6 + dgav .req v6 + dgb .req s7 + dgbv .req v7 + + dg0q .req q12 + dg0s .req s12 + dg0v .req v12 + dg1s .req s13 + dg1v .req v13 + dg2s .req s14 + + .macro add_only, op, ev, rc, s0, dg1 + .ifc \ev, ev + add t1.4s, v\s0\().4s, \rc\().4s + sha1h dg2s, dg0s + .ifnb \dg1 + sha1\op dg0q, \dg1, t0.4s + .else + sha1\op dg0q, dg1s, t0.4s + .endif + .else + .ifnb \s0 + add t0.4s, v\s0\().4s, \rc\().4s + .endif + sha1h dg1s, dg0s + sha1\op dg0q, dg2s, t1.4s + .endif + .endm + + .macro add_update, op, ev, rc, s0, s1, s2, s3, dg1 + sha1su0 v\s0\().4s, v\s1\().4s, v\s2\().4s + add_only \op, \ev, \rc, \s1, \dg1 + sha1su1 v\s0\().4s, v\s3\().4s + .endm + + /* + * The SHA1 round constants + */ + .align 4 +.Lsha1_rcon: + .word 0x5a827999, 0x6ed9eba1, 0x8f1bbcdc, 0xca62c1d6 + + /* + * void sha1_ce_transform(int blocks, u8 const *src, u32 *state, + * u8 *head, long bytes) + */ +ENTRY(sha1_ce_transform) + /* load round constants */ + adr x6, .Lsha1_rcon + ld1r {k0.4s}, [x6], #4 + ld1r {k1.4s}, [x6], #4 + ld1r {k2.4s}, [x6], #4 + ld1r {k3.4s}, [x6] + + /* load state */ + ldr dga, [x2] + ldr dgb, [x2, #16] + + /* load partial state (if supplied) */ + cbz x3, 0f + ld1 {v8.4s-v11.4s}, [x3] + b 1f + + /* load input */ +0: ld1 {v8.4s-v11.4s}, [x1], #64 + sub w0, w0, #1 + +1: +CPU_LE( rev32 v8.16b, v8.16b ) +CPU_LE( rev32 v9.16b, v9.16b ) +CPU_LE( rev32 v10.16b, v10.16b ) +CPU_LE( rev32 v11.16b, v11.16b ) + +2: add t0.4s, v8.4s, k0.4s + mov dg0v.16b, dgav.16b + + add_update c, ev, k0, 8, 9, 10, 11, dgb + add_update c, od, k0, 9, 10, 11, 8 + add_update c, ev, k0, 10, 11, 8, 9 + add_update c, od, k0, 11, 8, 9, 10 + add_update c, ev, k1, 8, 9, 10, 11 + + add_update p, od, k1, 9, 10, 11, 8 + add_update p, ev, k1, 10, 11, 8, 9 + add_update p, od, k1, 11, 8, 9, 10 + add_update p, ev, k1, 8, 9, 10, 11 + add_update p, od, k2, 9, 10, 11, 8 + + add_update m, ev, k2, 10, 11, 8, 9 + add_update m, od, k2, 11, 8, 9, 10 + add_update m, ev, k2, 8, 9, 10, 11 + add_update m, od, k2, 9, 10, 11, 8 + add_update m, ev, k3, 10, 11, 8, 9 + + add_update p, od, k3, 11, 8, 9, 10 + add_only p, ev, k3, 9 + add_only p, od, k3, 10 + add_only p, ev, k3, 11 + add_only p, od + + /* update state */ + add dgbv.2s, dgbv.2s, dg1v.2s + add dgav.4s, dgav.4s, dg0v.4s + + cbnz w0, 0b + + /* + * Final block: add padding and total bit count. + * Skip if we have no total byte count in x4. In that case, the input + * size was not a round multiple of the block size, and the padding is + * handled by the C code. + */ + cbz x4, 3f + movi v9.2d, #0 + mov x8, #0x80000000 + movi v10.2d, #0 + ror x7, x4, #29 // ror(lsl(x4, 3), 32) + fmov d8, x8 + mov x4, #0 + mov v11.d[0], xzr + mov v11.d[1], x7 + b 2b + + /* store new state */ +3: str dga, [x2] + str dgb, [x2, #16] + ret +ENDPROC(sha1_ce_transform) diff --git a/arch/arm64/crypto/sha1-ce-glue.c b/arch/arm64/crypto/sha1-ce-glue.c new file mode 100644 index 000000000000..6fe83f37a750 --- /dev/null +++ b/arch/arm64/crypto/sha1-ce-glue.c @@ -0,0 +1,174 @@ +/* + * sha1-ce-glue.c - SHA-1 secure hash using ARMv8 Crypto Extensions + * + * Copyright (C) 2014 Linaro Ltd + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include + +MODULE_DESCRIPTION("SHA1 secure hash using ARMv8 Crypto Extensions"); +MODULE_AUTHOR("Ard Biesheuvel "); +MODULE_LICENSE("GPL v2"); + +asmlinkage void sha1_ce_transform(int blocks, u8 const *src, u32 *state, + u8 *head, long bytes); + +static int sha1_init(struct shash_desc *desc) +{ + struct sha1_state *sctx = shash_desc_ctx(desc); + + *sctx = (struct sha1_state){ + .state = { SHA1_H0, SHA1_H1, SHA1_H2, SHA1_H3, SHA1_H4 }, + }; + return 0; +} + +static int sha1_update(struct shash_desc *desc, const u8 *data, + unsigned int len) +{ + struct sha1_state *sctx = shash_desc_ctx(desc); + unsigned int partial = sctx->count % SHA1_BLOCK_SIZE; + + sctx->count += len; + + if ((partial + len) >= SHA1_BLOCK_SIZE) { + int blocks; + + if (partial) { + int p = SHA1_BLOCK_SIZE - partial; + + memcpy(sctx->buffer + partial, data, p); + data += p; + len -= p; + } + + blocks = len / SHA1_BLOCK_SIZE; + len %= SHA1_BLOCK_SIZE; + + kernel_neon_begin_partial(16); + sha1_ce_transform(blocks, data, sctx->state, + partial ? sctx->buffer : NULL, 0); + kernel_neon_end(); + + data += blocks * SHA1_BLOCK_SIZE; + partial = 0; + } + if (len) + memcpy(sctx->buffer + partial, data, len); + return 0; +} + +static int sha1_final(struct shash_desc *desc, u8 *out) +{ + static const u8 padding[SHA1_BLOCK_SIZE] = { 0x80, }; + + struct sha1_state *sctx = shash_desc_ctx(desc); + __be64 bits = cpu_to_be64(sctx->count << 3); + __be32 *dst = (__be32 *)out; + int i; + + u32 padlen = SHA1_BLOCK_SIZE + - ((sctx->count + sizeof(bits)) % SHA1_BLOCK_SIZE); + + sha1_update(desc, padding, padlen); + sha1_update(desc, (const u8 *)&bits, sizeof(bits)); + + for (i = 0; i < SHA1_DIGEST_SIZE / sizeof(__be32); i++) + put_unaligned_be32(sctx->state[i], dst++); + + *sctx = (struct sha1_state){}; + return 0; +} + +static int sha1_finup(struct shash_desc *desc, const u8 *data, + unsigned int len, u8 *out) +{ + struct sha1_state *sctx = shash_desc_ctx(desc); + __be32 *dst = (__be32 *)out; + int blocks; + int i; + + if (sctx->count || !len || (len % SHA1_BLOCK_SIZE)) { + sha1_update(desc, data, len); + return sha1_final(desc, out); + } + + /* + * Use a fast path if the input is a multiple of 64 bytes. In + * this case, there is no need to copy data around, and we can + * perform the entire digest calculation in a single invocation + * of sha1_ce_transform() + */ + blocks = len / SHA1_BLOCK_SIZE; + + kernel_neon_begin_partial(16); + sha1_ce_transform(blocks, data, sctx->state, NULL, len); + kernel_neon_end(); + + for (i = 0; i < SHA1_DIGEST_SIZE / sizeof(__be32); i++) + put_unaligned_be32(sctx->state[i], dst++); + + *sctx = (struct sha1_state){}; + return 0; +} + +static int sha1_export(struct shash_desc *desc, void *out) +{ + struct sha1_state *sctx = shash_desc_ctx(desc); + struct sha1_state *dst = out; + + *dst = *sctx; + return 0; +} + +static int sha1_import(struct shash_desc *desc, const void *in) +{ + struct sha1_state *sctx = shash_desc_ctx(desc); + struct sha1_state const *src = in; + + *sctx = *src; + return 0; +} + +static struct shash_alg alg = { + .init = sha1_init, + .update = sha1_update, + .final = sha1_final, + .finup = sha1_finup, + .export = sha1_export, + .import = sha1_import, + .descsize = sizeof(struct sha1_state), + .digestsize = SHA1_DIGEST_SIZE, + .statesize = sizeof(struct sha1_state), + .base = { + .cra_name = "sha1", + .cra_driver_name = "sha1-ce", + .cra_priority = 200, + .cra_flags = CRYPTO_ALG_TYPE_SHASH, + .cra_blocksize = SHA1_BLOCK_SIZE, + .cra_module = THIS_MODULE, + } +}; + +static int __init sha1_ce_mod_init(void) +{ + return crypto_register_shash(&alg); +} + +static void __exit sha1_ce_mod_fini(void) +{ + crypto_unregister_shash(&alg); +} + +module_cpu_feature_match(SHA1, sha1_ce_mod_init); +module_exit(sha1_ce_mod_fini); -- cgit v1.2.3 From 6ba6c74dfc6bcf43312ef572592f7d4ebb3aedfa Mon Sep 17 00:00:00 2001 From: Ard Biesheuvel Date: Thu, 20 Mar 2014 15:35:40 +0100 Subject: arm64/crypto: SHA-224/SHA-256 using ARMv8 Crypto Extensions This patch adds support for the SHA-224 and SHA-256 Secure Hash Algorithms for CPUs that have support for the SHA-2 part of the ARM v8 Crypto Extensions. Signed-off-by: Ard Biesheuvel Acked-by: Herbert Xu --- arch/arm64/crypto/Kconfig | 5 + arch/arm64/crypto/Makefile | 3 + arch/arm64/crypto/sha2-ce-core.S | 156 ++++++++++++++++++++++++ arch/arm64/crypto/sha2-ce-glue.c | 255 +++++++++++++++++++++++++++++++++++++++ 4 files changed, 419 insertions(+) create mode 100644 arch/arm64/crypto/sha2-ce-core.S create mode 100644 arch/arm64/crypto/sha2-ce-glue.c diff --git a/arch/arm64/crypto/Kconfig b/arch/arm64/crypto/Kconfig index 7956881b5986..eb1e99770c21 100644 --- a/arch/arm64/crypto/Kconfig +++ b/arch/arm64/crypto/Kconfig @@ -13,4 +13,9 @@ config CRYPTO_SHA1_ARM64_CE depends on ARM64 && KERNEL_MODE_NEON select CRYPTO_HASH +config CRYPTO_SHA2_ARM64_CE + tristate "SHA-224/SHA-256 digest algorithm (ARMv8 Crypto Extensions)" + depends on ARM64 && KERNEL_MODE_NEON + select CRYPTO_HASH + endif diff --git a/arch/arm64/crypto/Makefile b/arch/arm64/crypto/Makefile index 0ed3caaec81b..0b3885a60d43 100644 --- a/arch/arm64/crypto/Makefile +++ b/arch/arm64/crypto/Makefile @@ -10,3 +10,6 @@ obj-$(CONFIG_CRYPTO_SHA1_ARM64_CE) += sha1-ce.o sha1-ce-y := sha1-ce-glue.o sha1-ce-core.o + +obj-$(CONFIG_CRYPTO_SHA2_ARM64_CE) += sha2-ce.o +sha2-ce-y := sha2-ce-glue.o sha2-ce-core.o diff --git a/arch/arm64/crypto/sha2-ce-core.S b/arch/arm64/crypto/sha2-ce-core.S new file mode 100644 index 000000000000..7f29fc031ea8 --- /dev/null +++ b/arch/arm64/crypto/sha2-ce-core.S @@ -0,0 +1,156 @@ +/* + * sha2-ce-core.S - core SHA-224/SHA-256 transform using v8 Crypto Extensions + * + * Copyright (C) 2014 Linaro Ltd + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include + + .text + .arch armv8-a+crypto + + dga .req q20 + dgav .req v20 + dgb .req q21 + dgbv .req v21 + + t0 .req v22 + t1 .req v23 + + dg0q .req q24 + dg0v .req v24 + dg1q .req q25 + dg1v .req v25 + dg2q .req q26 + dg2v .req v26 + + .macro add_only, ev, rc, s0 + mov dg2v.16b, dg0v.16b + .ifeq \ev + add t1.4s, v\s0\().4s, \rc\().4s + sha256h dg0q, dg1q, t0.4s + sha256h2 dg1q, dg2q, t0.4s + .else + .ifnb \s0 + add t0.4s, v\s0\().4s, \rc\().4s + .endif + sha256h dg0q, dg1q, t1.4s + sha256h2 dg1q, dg2q, t1.4s + .endif + .endm + + .macro add_update, ev, rc, s0, s1, s2, s3 + sha256su0 v\s0\().4s, v\s1\().4s + add_only \ev, \rc, \s1 + sha256su1 v\s0\().4s, v\s2\().4s, v\s3\().4s + .endm + + /* + * The SHA-256 round constants + */ + .align 4 +.Lsha2_rcon: + .word 0x428a2f98, 0x71374491, 0xb5c0fbcf, 0xe9b5dba5 + .word 0x3956c25b, 0x59f111f1, 0x923f82a4, 0xab1c5ed5 + .word 0xd807aa98, 0x12835b01, 0x243185be, 0x550c7dc3 + .word 0x72be5d74, 0x80deb1fe, 0x9bdc06a7, 0xc19bf174 + .word 0xe49b69c1, 0xefbe4786, 0x0fc19dc6, 0x240ca1cc + .word 0x2de92c6f, 0x4a7484aa, 0x5cb0a9dc, 0x76f988da + .word 0x983e5152, 0xa831c66d, 0xb00327c8, 0xbf597fc7 + .word 0xc6e00bf3, 0xd5a79147, 0x06ca6351, 0x14292967 + .word 0x27b70a85, 0x2e1b2138, 0x4d2c6dfc, 0x53380d13 + .word 0x650a7354, 0x766a0abb, 0x81c2c92e, 0x92722c85 + .word 0xa2bfe8a1, 0xa81a664b, 0xc24b8b70, 0xc76c51a3 + .word 0xd192e819, 0xd6990624, 0xf40e3585, 0x106aa070 + .word 0x19a4c116, 0x1e376c08, 0x2748774c, 0x34b0bcb5 + .word 0x391c0cb3, 0x4ed8aa4a, 0x5b9cca4f, 0x682e6ff3 + .word 0x748f82ee, 0x78a5636f, 0x84c87814, 0x8cc70208 + .word 0x90befffa, 0xa4506ceb, 0xbef9a3f7, 0xc67178f2 + + /* + * void sha2_ce_transform(int blocks, u8 const *src, u32 *state, + * u8 *head, long bytes) + */ +ENTRY(sha2_ce_transform) + /* load round constants */ + adr x8, .Lsha2_rcon + ld1 { v0.4s- v3.4s}, [x8], #64 + ld1 { v4.4s- v7.4s}, [x8], #64 + ld1 { v8.4s-v11.4s}, [x8], #64 + ld1 {v12.4s-v15.4s}, [x8] + + /* load state */ + ldp dga, dgb, [x2] + + /* load partial input (if supplied) */ + cbz x3, 0f + ld1 {v16.4s-v19.4s}, [x3] + b 1f + + /* load input */ +0: ld1 {v16.4s-v19.4s}, [x1], #64 + sub w0, w0, #1 + +1: +CPU_LE( rev32 v16.16b, v16.16b ) +CPU_LE( rev32 v17.16b, v17.16b ) +CPU_LE( rev32 v18.16b, v18.16b ) +CPU_LE( rev32 v19.16b, v19.16b ) + +2: add t0.4s, v16.4s, v0.4s + mov dg0v.16b, dgav.16b + mov dg1v.16b, dgbv.16b + + add_update 0, v1, 16, 17, 18, 19 + add_update 1, v2, 17, 18, 19, 16 + add_update 0, v3, 18, 19, 16, 17 + add_update 1, v4, 19, 16, 17, 18 + + add_update 0, v5, 16, 17, 18, 19 + add_update 1, v6, 17, 18, 19, 16 + add_update 0, v7, 18, 19, 16, 17 + add_update 1, v8, 19, 16, 17, 18 + + add_update 0, v9, 16, 17, 18, 19 + add_update 1, v10, 17, 18, 19, 16 + add_update 0, v11, 18, 19, 16, 17 + add_update 1, v12, 19, 16, 17, 18 + + add_only 0, v13, 17 + add_only 1, v14, 18 + add_only 0, v15, 19 + add_only 1 + + /* update state */ + add dgav.4s, dgav.4s, dg0v.4s + add dgbv.4s, dgbv.4s, dg1v.4s + + /* handled all input blocks? */ + cbnz w0, 0b + + /* + * Final block: add padding and total bit count. + * Skip if we have no total byte count in x4. In that case, the input + * size was not a round multiple of the block size, and the padding is + * handled by the C code. + */ + cbz x4, 3f + movi v17.2d, #0 + mov x8, #0x80000000 + movi v18.2d, #0 + ror x7, x4, #29 // ror(lsl(x4, 3), 32) + fmov d16, x8 + mov x4, #0 + mov v19.d[0], xzr + mov v19.d[1], x7 + b 2b + + /* store new state */ +3: stp dga, dgb, [x2] + ret +ENDPROC(sha2_ce_transform) diff --git a/arch/arm64/crypto/sha2-ce-glue.c b/arch/arm64/crypto/sha2-ce-glue.c new file mode 100644 index 000000000000..c294e67d3925 --- /dev/null +++ b/arch/arm64/crypto/sha2-ce-glue.c @@ -0,0 +1,255 @@ +/* + * sha2-ce-glue.c - SHA-224/SHA-256 using ARMv8 Crypto Extensions + * + * Copyright (C) 2014 Linaro Ltd + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include + +MODULE_DESCRIPTION("SHA-224/SHA-256 secure hash using ARMv8 Crypto Extensions"); +MODULE_AUTHOR("Ard Biesheuvel "); +MODULE_LICENSE("GPL v2"); + +asmlinkage int sha2_ce_transform(int blocks, u8 const *src, u32 *state, + u8 *head, long bytes); + +static int sha224_init(struct shash_desc *desc) +{ + struct sha256_state *sctx = shash_desc_ctx(desc); + + *sctx = (struct sha256_state){ + .state = { + SHA224_H0, SHA224_H1, SHA224_H2, SHA224_H3, + SHA224_H4, SHA224_H5, SHA224_H6, SHA224_H7, + } + }; + return 0; +} + +static int sha256_init(struct shash_desc *desc) +{ + struct sha256_state *sctx = shash_desc_ctx(desc); + + *sctx = (struct sha256_state){ + .state = { + SHA256_H0, SHA256_H1, SHA256_H2, SHA256_H3, + SHA256_H4, SHA256_H5, SHA256_H6, SHA256_H7, + } + }; + return 0; +} + +static int sha2_update(struct shash_desc *desc, const u8 *data, + unsigned int len) +{ + struct sha256_state *sctx = shash_desc_ctx(desc); + unsigned int partial = sctx->count % SHA256_BLOCK_SIZE; + + sctx->count += len; + + if ((partial + len) >= SHA256_BLOCK_SIZE) { + int blocks; + + if (partial) { + int p = SHA256_BLOCK_SIZE - partial; + + memcpy(sctx->buf + partial, data, p); + data += p; + len -= p; + } + + blocks = len / SHA256_BLOCK_SIZE; + len %= SHA256_BLOCK_SIZE; + + kernel_neon_begin_partial(28); + sha2_ce_transform(blocks, data, sctx->state, + partial ? sctx->buf : NULL, 0); + kernel_neon_end(); + + data += blocks * SHA256_BLOCK_SIZE; + partial = 0; + } + if (len) + memcpy(sctx->buf + partial, data, len); + return 0; +} + +static void sha2_final(struct shash_desc *desc) +{ + static const u8 padding[SHA256_BLOCK_SIZE] = { 0x80, }; + + struct sha256_state *sctx = shash_desc_ctx(desc); + __be64 bits = cpu_to_be64(sctx->count << 3); + u32 padlen = SHA256_BLOCK_SIZE + - ((sctx->count + sizeof(bits)) % SHA256_BLOCK_SIZE); + + sha2_update(desc, padding, padlen); + sha2_update(desc, (const u8 *)&bits, sizeof(bits)); +} + +static int sha224_final(struct shash_desc *desc, u8 *out) +{ + struct sha256_state *sctx = shash_desc_ctx(desc); + __be32 *dst = (__be32 *)out; + int i; + + sha2_final(desc); + + for (i = 0; i < SHA224_DIGEST_SIZE / sizeof(__be32); i++) + put_unaligned_be32(sctx->state[i], dst++); + + *sctx = (struct sha256_state){}; + return 0; +} + +static int sha256_final(struct shash_desc *desc, u8 *out) +{ + struct sha256_state *sctx = shash_desc_ctx(desc); + __be32 *dst = (__be32 *)out; + int i; + + sha2_final(desc); + + for (i = 0; i < SHA256_DIGEST_SIZE / sizeof(__be32); i++) + put_unaligned_be32(sctx->state[i], dst++); + + *sctx = (struct sha256_state){}; + return 0; +} + +static void sha2_finup(struct shash_desc *desc, const u8 *data, + unsigned int len) +{ + struct sha256_state *sctx = shash_desc_ctx(desc); + int blocks; + + if (sctx->count || !len || (len % SHA256_BLOCK_SIZE)) { + sha2_update(desc, data, len); + sha2_final(desc); + return; + } + + /* + * Use a fast path if the input is a multiple of 64 bytes. In + * this case, there is no need to copy data around, and we can + * perform the entire digest calculation in a single invocation + * of sha2_ce_transform() + */ + blocks = len / SHA256_BLOCK_SIZE; + + kernel_neon_begin_partial(28); + sha2_ce_transform(blocks, data, sctx->state, NULL, len); + kernel_neon_end(); + data += blocks * SHA256_BLOCK_SIZE; +} + +static int sha224_finup(struct shash_desc *desc, const u8 *data, + unsigned int len, u8 *out) +{ + struct sha256_state *sctx = shash_desc_ctx(desc); + __be32 *dst = (__be32 *)out; + int i; + + sha2_finup(desc, data, len); + + for (i = 0; i < SHA224_DIGEST_SIZE / sizeof(__be32); i++) + put_unaligned_be32(sctx->state[i], dst++); + + *sctx = (struct sha256_state){}; + return 0; +} + +static int sha256_finup(struct shash_desc *desc, const u8 *data, + unsigned int len, u8 *out) +{ + struct sha256_state *sctx = shash_desc_ctx(desc); + __be32 *dst = (__be32 *)out; + int i; + + sha2_finup(desc, data, len); + + for (i = 0; i < SHA256_DIGEST_SIZE / sizeof(__be32); i++) + put_unaligned_be32(sctx->state[i], dst++); + + *sctx = (struct sha256_state){}; + return 0; +} + +static int sha2_export(struct shash_desc *desc, void *out) +{ + struct sha256_state *sctx = shash_desc_ctx(desc); + struct sha256_state *dst = out; + + *dst = *sctx; + return 0; +} + +static int sha2_import(struct shash_desc *desc, const void *in) +{ + struct sha256_state *sctx = shash_desc_ctx(desc); + struct sha256_state const *src = in; + + *sctx = *src; + return 0; +} + +static struct shash_alg algs[] = { { + .init = sha224_init, + .update = sha2_update, + .final = sha224_final, + .finup = sha224_finup, + .export = sha2_export, + .import = sha2_import, + .descsize = sizeof(struct sha256_state), + .digestsize = SHA224_DIGEST_SIZE, + .statesize = sizeof(struct sha256_state), + .base = { + .cra_name = "sha224", + .cra_driver_name = "sha224-ce", + .cra_priority = 200, + .cra_flags = CRYPTO_ALG_TYPE_SHASH, + .cra_blocksize = SHA256_BLOCK_SIZE, + .cra_module = THIS_MODULE, + } +}, { + .init = sha256_init, + .update = sha2_update, + .final = sha256_final, + .finup = sha256_finup, + .export = sha2_export, + .import = sha2_import, + .descsize = sizeof(struct sha256_state), + .digestsize = SHA256_DIGEST_SIZE, + .statesize = sizeof(struct sha256_state), + .base = { + .cra_name = "sha256", + .cra_driver_name = "sha256-ce", + .cra_priority = 200, + .cra_flags = CRYPTO_ALG_TYPE_SHASH, + .cra_blocksize = SHA256_BLOCK_SIZE, + .cra_module = THIS_MODULE, + } +} }; + +static int __init sha2_ce_mod_init(void) +{ + return crypto_register_shashes(algs, ARRAY_SIZE(algs)); +} + +static void __exit sha2_ce_mod_fini(void) +{ + crypto_unregister_shashes(algs, ARRAY_SIZE(algs)); +} + +module_cpu_feature_match(SHA2, sha2_ce_mod_init); +module_exit(sha2_ce_mod_fini); -- cgit v1.2.3 From fdd2389457b209a9723c3be818fcf301f35db906 Mon Sep 17 00:00:00 2001 From: Ard Biesheuvel Date: Wed, 26 Mar 2014 20:53:05 +0100 Subject: arm64/crypto: GHASH secure hash using ARMv8 Crypto Extensions This is a port to ARMv8 (Crypto Extensions) of the Intel implementation of the GHASH Secure Hash (used in the Galois/Counter chaining mode). It relies on the optional PMULL/PMULL2 instruction (polynomial multiply long, what Intel call carry-less multiply). Signed-off-by: Ard Biesheuvel Acked-by: Herbert Xu --- arch/arm64/crypto/Kconfig | 6 ++ arch/arm64/crypto/Makefile | 3 + arch/arm64/crypto/ghash-ce-core.S | 95 +++++++++++++++++++++++ arch/arm64/crypto/ghash-ce-glue.c | 155 ++++++++++++++++++++++++++++++++++++++ 4 files changed, 259 insertions(+) create mode 100644 arch/arm64/crypto/ghash-ce-core.S create mode 100644 arch/arm64/crypto/ghash-ce-glue.c diff --git a/arch/arm64/crypto/Kconfig b/arch/arm64/crypto/Kconfig index eb1e99770c21..0c50859ee7b9 100644 --- a/arch/arm64/crypto/Kconfig +++ b/arch/arm64/crypto/Kconfig @@ -18,4 +18,10 @@ config CRYPTO_SHA2_ARM64_CE depends on ARM64 && KERNEL_MODE_NEON select CRYPTO_HASH + +config CRYPTO_GHASH_ARM64_CE + tristate "GHASH (for GCM chaining mode) using ARMv8 Crypto Extensions" + depends on ARM64 && KERNEL_MODE_NEON + select CRYPTO_HASH + endif diff --git a/arch/arm64/crypto/Makefile b/arch/arm64/crypto/Makefile index 0b3885a60d43..e8c81a068868 100644 --- a/arch/arm64/crypto/Makefile +++ b/arch/arm64/crypto/Makefile @@ -13,3 +13,6 @@ sha1-ce-y := sha1-ce-glue.o sha1-ce-core.o obj-$(CONFIG_CRYPTO_SHA2_ARM64_CE) += sha2-ce.o sha2-ce-y := sha2-ce-glue.o sha2-ce-core.o + +obj-$(CONFIG_CRYPTO_GHASH_ARM64_CE) += ghash-ce.o +ghash-ce-y := ghash-ce-glue.o ghash-ce-core.o diff --git a/arch/arm64/crypto/ghash-ce-core.S b/arch/arm64/crypto/ghash-ce-core.S new file mode 100644 index 000000000000..b9e6eaf41c9b --- /dev/null +++ b/arch/arm64/crypto/ghash-ce-core.S @@ -0,0 +1,95 @@ +/* + * Accelerated GHASH implementation with ARMv8 PMULL instructions. + * + * Copyright (C) 2014 Linaro Ltd. + * + * Based on arch/x86/crypto/ghash-pmullni-intel_asm.S + * + * Copyright (c) 2009 Intel Corp. + * Author: Huang Ying + * Vinodh Gopal + * Erdinc Ozturk + * Deniz Karakoyunlu + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include +#include + + DATA .req v0 + SHASH .req v1 + IN1 .req v2 + T1 .req v2 + T2 .req v3 + T3 .req v4 + VZR .req v5 + + .text + .arch armv8-a+crypto + + /* + * void pmull_ghash_update(int blocks, u64 dg[], const char *src, + * struct ghash_key const *k, const char *head) + */ +ENTRY(pmull_ghash_update) + ld1 {DATA.16b}, [x1] + ld1 {SHASH.16b}, [x3] + eor VZR.16b, VZR.16b, VZR.16b + + /* do the head block first, if supplied */ + cbz x4, 0f + ld1 {IN1.2d}, [x4] + b 1f + +0: ld1 {IN1.2d}, [x2], #16 + sub w0, w0, #1 +1: ext IN1.16b, IN1.16b, IN1.16b, #8 +CPU_LE( rev64 IN1.16b, IN1.16b ) + eor DATA.16b, DATA.16b, IN1.16b + + /* multiply DATA by SHASH in GF(2^128) */ + ext T2.16b, DATA.16b, DATA.16b, #8 + ext T3.16b, SHASH.16b, SHASH.16b, #8 + eor T2.16b, T2.16b, DATA.16b + eor T3.16b, T3.16b, SHASH.16b + + pmull2 T1.1q, SHASH.2d, DATA.2d // a1 * b1 + pmull DATA.1q, SHASH.1d, DATA.1d // a0 * b0 + pmull T2.1q, T2.1d, T3.1d // (a1 + a0)(b1 + b0) + eor T2.16b, T2.16b, T1.16b // (a0 * b1) + (a1 * b0) + eor T2.16b, T2.16b, DATA.16b + + ext T3.16b, VZR.16b, T2.16b, #8 + ext T2.16b, T2.16b, VZR.16b, #8 + eor DATA.16b, DATA.16b, T3.16b + eor T1.16b, T1.16b, T2.16b // is result of + // carry-less multiplication + + /* first phase of the reduction */ + shl T3.2d, DATA.2d, #1 + eor T3.16b, T3.16b, DATA.16b + shl T3.2d, T3.2d, #5 + eor T3.16b, T3.16b, DATA.16b + shl T3.2d, T3.2d, #57 + ext T2.16b, VZR.16b, T3.16b, #8 + ext T3.16b, T3.16b, VZR.16b, #8 + eor DATA.16b, DATA.16b, T2.16b + eor T1.16b, T1.16b, T3.16b + + /* second phase of the reduction */ + ushr T2.2d, DATA.2d, #5 + eor T2.16b, T2.16b, DATA.16b + ushr T2.2d, T2.2d, #1 + eor T2.16b, T2.16b, DATA.16b + ushr T2.2d, T2.2d, #1 + eor T1.16b, T1.16b, T2.16b + eor DATA.16b, DATA.16b, T1.16b + + cbnz w0, 0b + + st1 {DATA.16b}, [x1] + ret +ENDPROC(pmull_ghash_update) diff --git a/arch/arm64/crypto/ghash-ce-glue.c b/arch/arm64/crypto/ghash-ce-glue.c new file mode 100644 index 000000000000..b92baf3f68c7 --- /dev/null +++ b/arch/arm64/crypto/ghash-ce-glue.c @@ -0,0 +1,155 @@ +/* + * Accelerated GHASH implementation with ARMv8 PMULL instructions. + * + * Copyright (C) 2014 Linaro Ltd. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include + +MODULE_DESCRIPTION("GHASH secure hash using ARMv8 Crypto Extensions"); +MODULE_AUTHOR("Ard Biesheuvel "); +MODULE_LICENSE("GPL v2"); + +#define GHASH_BLOCK_SIZE 16 +#define GHASH_DIGEST_SIZE 16 + +struct ghash_key { + u64 a; + u64 b; +}; + +struct ghash_desc_ctx { + u64 digest[GHASH_DIGEST_SIZE/sizeof(u64)]; + u8 buf[GHASH_BLOCK_SIZE]; + u32 count; +}; + +asmlinkage void pmull_ghash_update(int blocks, u64 dg[], const char *src, + struct ghash_key const *k, const char *head); + +static int ghash_init(struct shash_desc *desc) +{ + struct ghash_desc_ctx *ctx = shash_desc_ctx(desc); + + *ctx = (struct ghash_desc_ctx){}; + return 0; +} + +static int ghash_update(struct shash_desc *desc, const u8 *src, + unsigned int len) +{ + struct ghash_desc_ctx *ctx = shash_desc_ctx(desc); + unsigned int partial = ctx->count % GHASH_BLOCK_SIZE; + + ctx->count += len; + + if ((partial + len) >= GHASH_BLOCK_SIZE) { + struct ghash_key *key = crypto_shash_ctx(desc->tfm); + int blocks; + + if (partial) { + int p = GHASH_BLOCK_SIZE - partial; + + memcpy(ctx->buf + partial, src, p); + src += p; + len -= p; + } + + blocks = len / GHASH_BLOCK_SIZE; + len %= GHASH_BLOCK_SIZE; + + kernel_neon_begin_partial(6); + pmull_ghash_update(blocks, ctx->digest, src, key, + partial ? ctx->buf : NULL); + kernel_neon_end(); + src += blocks * GHASH_BLOCK_SIZE; + } + if (len) + memcpy(ctx->buf + partial, src, len); + return 0; +} + +static int ghash_final(struct shash_desc *desc, u8 *dst) +{ + struct ghash_desc_ctx *ctx = shash_desc_ctx(desc); + unsigned int partial = ctx->count % GHASH_BLOCK_SIZE; + + if (partial) { + struct ghash_key *key = crypto_shash_ctx(desc->tfm); + + memset(ctx->buf + partial, 0, GHASH_BLOCK_SIZE - partial); + + kernel_neon_begin_partial(6); + pmull_ghash_update(1, ctx->digest, ctx->buf, key, NULL); + kernel_neon_end(); + } + put_unaligned_be64(ctx->digest[1], dst); + put_unaligned_be64(ctx->digest[0], dst + 8); + + *ctx = (struct ghash_desc_ctx){}; + return 0; +} + +static int ghash_setkey(struct crypto_shash *tfm, + const u8 *inkey, unsigned int keylen) +{ + struct ghash_key *key = crypto_shash_ctx(tfm); + u64 a, b; + + if (keylen != GHASH_BLOCK_SIZE) { + crypto_shash_set_flags(tfm, CRYPTO_TFM_RES_BAD_KEY_LEN); + return -EINVAL; + } + + /* perform multiplication by 'x' in GF(2^128) */ + b = get_unaligned_be64(inkey); + a = get_unaligned_be64(inkey + 8); + + key->a = (a << 1) | (b >> 63); + key->b = (b << 1) | (a >> 63); + + if (b >> 63) + key->b ^= 0xc200000000000000UL; + + return 0; +} + +static struct shash_alg ghash_alg = { + .digestsize = GHASH_DIGEST_SIZE, + .init = ghash_init, + .update = ghash_update, + .final = ghash_final, + .setkey = ghash_setkey, + .descsize = sizeof(struct ghash_desc_ctx), + .base = { + .cra_name = "ghash", + .cra_driver_name = "ghash-ce", + .cra_priority = 200, + .cra_flags = CRYPTO_ALG_TYPE_SHASH, + .cra_blocksize = GHASH_BLOCK_SIZE, + .cra_ctxsize = sizeof(struct ghash_key), + .cra_module = THIS_MODULE, + }, +}; + +static int __init ghash_ce_mod_init(void) +{ + return crypto_register_shash(&ghash_alg); +} + +static void __exit ghash_ce_mod_exit(void) +{ + crypto_unregister_shash(&ghash_alg); +} + +module_cpu_feature_match(PMULL, ghash_ce_mod_init); +module_exit(ghash_ce_mod_exit); -- cgit v1.2.3 From 317f2f750d708d684bddd8cb14827ec2efee4b1c Mon Sep 17 00:00:00 2001 From: Ard Biesheuvel Date: Wed, 5 Feb 2014 18:13:38 +0100 Subject: arm64/crypto: AES using ARMv8 Crypto Extensions This patch adds support for the AES symmetric encryption algorithm for CPUs that have support for the AES part of the ARM v8 Crypto Extensions. Signed-off-by: Ard Biesheuvel Acked-by: Herbert Xu --- arch/arm64/crypto/Kconfig | 7 +- arch/arm64/crypto/Makefile | 3 + arch/arm64/crypto/aes-ce-cipher.c | 155 ++++++++++++++++++++++++++++++++++++++ 3 files changed, 164 insertions(+), 1 deletion(-) create mode 100644 arch/arm64/crypto/aes-ce-cipher.c diff --git a/arch/arm64/crypto/Kconfig b/arch/arm64/crypto/Kconfig index 0c50859ee7b9..9ba32c0da871 100644 --- a/arch/arm64/crypto/Kconfig +++ b/arch/arm64/crypto/Kconfig @@ -18,10 +18,15 @@ config CRYPTO_SHA2_ARM64_CE depends on ARM64 && KERNEL_MODE_NEON select CRYPTO_HASH - config CRYPTO_GHASH_ARM64_CE tristate "GHASH (for GCM chaining mode) using ARMv8 Crypto Extensions" depends on ARM64 && KERNEL_MODE_NEON select CRYPTO_HASH +config CRYPTO_AES_ARM64_CE + tristate "AES core cipher using ARMv8 Crypto Extensions" + depends on ARM64 && KERNEL_MODE_NEON + select CRYPTO_ALGAPI + select CRYPTO_AES + endif diff --git a/arch/arm64/crypto/Makefile b/arch/arm64/crypto/Makefile index e8c81a068868..908abd9242b1 100644 --- a/arch/arm64/crypto/Makefile +++ b/arch/arm64/crypto/Makefile @@ -16,3 +16,6 @@ sha2-ce-y := sha2-ce-glue.o sha2-ce-core.o obj-$(CONFIG_CRYPTO_GHASH_ARM64_CE) += ghash-ce.o ghash-ce-y := ghash-ce-glue.o ghash-ce-core.o + +obj-$(CONFIG_CRYPTO_AES_ARM64_CE) += aes-ce-cipher.o +CFLAGS_aes-ce-cipher.o += -march=armv8-a+crypto diff --git a/arch/arm64/crypto/aes-ce-cipher.c b/arch/arm64/crypto/aes-ce-cipher.c new file mode 100644 index 000000000000..2075e1acae6b --- /dev/null +++ b/arch/arm64/crypto/aes-ce-cipher.c @@ -0,0 +1,155 @@ +/* + * aes-ce-cipher.c - core AES cipher using ARMv8 Crypto Extensions + * + * Copyright (C) 2013 - 2014 Linaro Ltd + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include + +MODULE_DESCRIPTION("Synchronous AES cipher using ARMv8 Crypto Extensions"); +MODULE_AUTHOR("Ard Biesheuvel "); +MODULE_LICENSE("GPL v2"); + +struct aes_block { + u8 b[AES_BLOCK_SIZE]; +}; + +static int num_rounds(struct crypto_aes_ctx *ctx) +{ + /* + * # of rounds specified by AES: + * 128 bit key 10 rounds + * 192 bit key 12 rounds + * 256 bit key 14 rounds + * => n byte key => 6 + (n/4) rounds + */ + return 6 + ctx->key_length / 4; +} + +static void aes_cipher_encrypt(struct crypto_tfm *tfm, u8 dst[], u8 const src[]) +{ + struct crypto_aes_ctx *ctx = crypto_tfm_ctx(tfm); + struct aes_block *out = (struct aes_block *)dst; + struct aes_block const *in = (struct aes_block *)src; + void *dummy0; + int dummy1; + + kernel_neon_begin_partial(4); + + __asm__(" ld1 {v0.16b}, %[in] ;" + " ld1 {v1.2d}, [%[key]], #16 ;" + " cmp %w[rounds], #10 ;" + " bmi 0f ;" + " bne 3f ;" + " mov v3.16b, v1.16b ;" + " b 2f ;" + "0: mov v2.16b, v1.16b ;" + " ld1 {v3.2d}, [%[key]], #16 ;" + "1: aese v0.16b, v2.16b ;" + " aesmc v0.16b, v0.16b ;" + "2: ld1 {v1.2d}, [%[key]], #16 ;" + " aese v0.16b, v3.16b ;" + " aesmc v0.16b, v0.16b ;" + "3: ld1 {v2.2d}, [%[key]], #16 ;" + " subs %w[rounds], %w[rounds], #3 ;" + " aese v0.16b, v1.16b ;" + " aesmc v0.16b, v0.16b ;" + " ld1 {v3.2d}, [%[key]], #16 ;" + " bpl 1b ;" + " aese v0.16b, v2.16b ;" + " eor v0.16b, v0.16b, v3.16b ;" + " st1 {v0.16b}, %[out] ;" + + : [out] "=Q"(*out), + [key] "=r"(dummy0), + [rounds] "=r"(dummy1) + : [in] "Q"(*in), + "1"(ctx->key_enc), + "2"(num_rounds(ctx) - 2) + : "cc"); + + kernel_neon_end(); +} + +static void aes_cipher_decrypt(struct crypto_tfm *tfm, u8 dst[], u8 const src[]) +{ + struct crypto_aes_ctx *ctx = crypto_tfm_ctx(tfm); + struct aes_block *out = (struct aes_block *)dst; + struct aes_block const *in = (struct aes_block *)src; + void *dummy0; + int dummy1; + + kernel_neon_begin_partial(4); + + __asm__(" ld1 {v0.16b}, %[in] ;" + " ld1 {v1.2d}, [%[key]], #16 ;" + " cmp %w[rounds], #10 ;" + " bmi 0f ;" + " bne 3f ;" + " mov v3.16b, v1.16b ;" + " b 2f ;" + "0: mov v2.16b, v1.16b ;" + " ld1 {v3.2d}, [%[key]], #16 ;" + "1: aesd v0.16b, v2.16b ;" + " aesimc v0.16b, v0.16b ;" + "2: ld1 {v1.2d}, [%[key]], #16 ;" + " aesd v0.16b, v3.16b ;" + " aesimc v0.16b, v0.16b ;" + "3: ld1 {v2.2d}, [%[key]], #16 ;" + " subs %w[rounds], %w[rounds], #3 ;" + " aesd v0.16b, v1.16b ;" + " aesimc v0.16b, v0.16b ;" + " ld1 {v3.2d}, [%[key]], #16 ;" + " bpl 1b ;" + " aesd v0.16b, v2.16b ;" + " eor v0.16b, v0.16b, v3.16b ;" + " st1 {v0.16b}, %[out] ;" + + : [out] "=Q"(*out), + [key] "=r"(dummy0), + [rounds] "=r"(dummy1) + : [in] "Q"(*in), + "1"(ctx->key_dec), + "2"(num_rounds(ctx) - 2) + : "cc"); + + kernel_neon_end(); +} + +static struct crypto_alg aes_alg = { + .cra_name = "aes", + .cra_driver_name = "aes-ce", + .cra_priority = 300, + .cra_flags = CRYPTO_ALG_TYPE_CIPHER, + .cra_blocksize = AES_BLOCK_SIZE, + .cra_ctxsize = sizeof(struct crypto_aes_ctx), + .cra_module = THIS_MODULE, + .cra_cipher = { + .cia_min_keysize = AES_MIN_KEY_SIZE, + .cia_max_keysize = AES_MAX_KEY_SIZE, + .cia_setkey = crypto_aes_set_key, + .cia_encrypt = aes_cipher_encrypt, + .cia_decrypt = aes_cipher_decrypt + } +}; + +static int __init aes_mod_init(void) +{ + return crypto_register_alg(&aes_alg); +} + +static void __exit aes_mod_exit(void) +{ + crypto_unregister_alg(&aes_alg); +} + +module_cpu_feature_match(AES, aes_mod_init); +module_exit(aes_mod_exit); -- cgit v1.2.3 From a3fd82105b9d149033984bf018f473140f5b94bc Mon Sep 17 00:00:00 2001 From: Ard Biesheuvel Date: Mon, 10 Feb 2014 11:26:29 +0100 Subject: arm64/crypto: AES in CCM mode using ARMv8 Crypto Extensions This patch adds support for the AES-CCM encryption algorithm for CPUs that have support for the AES part of the ARM v8 Crypto Extensions. Signed-off-by: Ard Biesheuvel Acked-by: Herbert Xu --- arch/arm64/crypto/Kconfig | 7 + arch/arm64/crypto/Makefile | 3 + arch/arm64/crypto/aes-ce-ccm-core.S | 222 +++++++++++++++++++++++++++ arch/arm64/crypto/aes-ce-ccm-glue.c | 297 ++++++++++++++++++++++++++++++++++++ 4 files changed, 529 insertions(+) create mode 100644 arch/arm64/crypto/aes-ce-ccm-core.S create mode 100644 arch/arm64/crypto/aes-ce-ccm-glue.c diff --git a/arch/arm64/crypto/Kconfig b/arch/arm64/crypto/Kconfig index 9ba32c0da871..8fffd5af65ef 100644 --- a/arch/arm64/crypto/Kconfig +++ b/arch/arm64/crypto/Kconfig @@ -29,4 +29,11 @@ config CRYPTO_AES_ARM64_CE select CRYPTO_ALGAPI select CRYPTO_AES +config CRYPTO_AES_ARM64_CE_CCM + tristate "AES in CCM mode using ARMv8 Crypto Extensions" + depends on ARM64 && KERNEL_MODE_NEON + select CRYPTO_ALGAPI + select CRYPTO_AES + select CRYPTO_AEAD + endif diff --git a/arch/arm64/crypto/Makefile b/arch/arm64/crypto/Makefile index 908abd9242b1..311287d68078 100644 --- a/arch/arm64/crypto/Makefile +++ b/arch/arm64/crypto/Makefile @@ -19,3 +19,6 @@ ghash-ce-y := ghash-ce-glue.o ghash-ce-core.o obj-$(CONFIG_CRYPTO_AES_ARM64_CE) += aes-ce-cipher.o CFLAGS_aes-ce-cipher.o += -march=armv8-a+crypto + +obj-$(CONFIG_CRYPTO_AES_ARM64_CE_CCM) += aes-ce-ccm.o +aes-ce-ccm-y := aes-ce-ccm-glue.o aes-ce-ccm-core.o diff --git a/arch/arm64/crypto/aes-ce-ccm-core.S b/arch/arm64/crypto/aes-ce-ccm-core.S new file mode 100644 index 000000000000..432e4841cd81 --- /dev/null +++ b/arch/arm64/crypto/aes-ce-ccm-core.S @@ -0,0 +1,222 @@ +/* + * aesce-ccm-core.S - AES-CCM transform for ARMv8 with Crypto Extensions + * + * Copyright (C) 2013 - 2014 Linaro Ltd + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include + + .text + .arch armv8-a+crypto + + /* + * void ce_aes_ccm_auth_data(u8 mac[], u8 const in[], u32 abytes, + * u32 *macp, u8 const rk[], u32 rounds); + */ +ENTRY(ce_aes_ccm_auth_data) + ldr w8, [x3] /* leftover from prev round? */ + ld1 {v0.2d}, [x0] /* load mac */ + cbz w8, 1f + sub w8, w8, #16 + eor v1.16b, v1.16b, v1.16b +0: ldrb w7, [x1], #1 /* get 1 byte of input */ + subs w2, w2, #1 + add w8, w8, #1 + ins v1.b[0], w7 + ext v1.16b, v1.16b, v1.16b, #1 /* rotate in the input bytes */ + beq 8f /* out of input? */ + cbnz w8, 0b + eor v0.16b, v0.16b, v1.16b +1: ld1 {v3.2d}, [x4] /* load first round key */ + prfm pldl1strm, [x1] + cmp w5, #12 /* which key size? */ + add x6, x4, #16 + sub w7, w5, #2 /* modified # of rounds */ + bmi 2f + bne 5f + mov v5.16b, v3.16b + b 4f +2: mov v4.16b, v3.16b + ld1 {v5.2d}, [x6], #16 /* load 2nd round key */ +3: aese v0.16b, v4.16b + aesmc v0.16b, v0.16b +4: ld1 {v3.2d}, [x6], #16 /* load next round key */ + aese v0.16b, v5.16b + aesmc v0.16b, v0.16b +5: ld1 {v4.2d}, [x6], #16 /* load next round key */ + subs w7, w7, #3 + aese v0.16b, v3.16b + aesmc v0.16b, v0.16b + ld1 {v5.2d}, [x6], #16 /* load next round key */ + bpl 3b + aese v0.16b, v4.16b + subs w2, w2, #16 /* last data? */ + eor v0.16b, v0.16b, v5.16b /* final round */ + bmi 6f + ld1 {v1.16b}, [x1], #16 /* load next input block */ + eor v0.16b, v0.16b, v1.16b /* xor with mac */ + bne 1b +6: st1 {v0.2d}, [x0] /* store mac */ + beq 10f + adds w2, w2, #16 + beq 10f + mov w8, w2 +7: ldrb w7, [x1], #1 + umov w6, v0.b[0] + eor w6, w6, w7 + strb w6, [x0], #1 + subs w2, w2, #1 + beq 10f + ext v0.16b, v0.16b, v0.16b, #1 /* rotate out the mac bytes */ + b 7b +8: mov w7, w8 + add w8, w8, #16 +9: ext v1.16b, v1.16b, v1.16b, #1 + adds w7, w7, #1 + bne 9b + eor v0.16b, v0.16b, v1.16b + st1 {v0.2d}, [x0] +10: str w8, [x3] + ret +ENDPROC(ce_aes_ccm_auth_data) + + /* + * void ce_aes_ccm_final(u8 mac[], u8 const ctr[], u8 const rk[], + * u32 rounds); + */ +ENTRY(ce_aes_ccm_final) + ld1 {v3.2d}, [x2], #16 /* load first round key */ + ld1 {v0.2d}, [x0] /* load mac */ + cmp w3, #12 /* which key size? */ + sub w3, w3, #2 /* modified # of rounds */ + ld1 {v1.2d}, [x1] /* load 1st ctriv */ + bmi 0f + bne 3f + mov v5.16b, v3.16b + b 2f +0: mov v4.16b, v3.16b +1: ld1 {v5.2d}, [x2], #16 /* load next round key */ + aese v0.16b, v4.16b + aese v1.16b, v4.16b + aesmc v0.16b, v0.16b + aesmc v1.16b, v1.16b +2: ld1 {v3.2d}, [x2], #16 /* load next round key */ + aese v0.16b, v5.16b + aese v1.16b, v5.16b + aesmc v0.16b, v0.16b + aesmc v1.16b, v1.16b +3: ld1 {v4.2d}, [x2], #16 /* load next round key */ + subs w3, w3, #3 + aese v0.16b, v3.16b + aese v1.16b, v3.16b + aesmc v0.16b, v0.16b + aesmc v1.16b, v1.16b + bpl 1b + aese v0.16b, v4.16b + aese v1.16b, v4.16b + /* final round key cancels out */ + eor v0.16b, v0.16b, v1.16b /* en-/decrypt the mac */ + st1 {v0.2d}, [x0] /* store result */ + ret +ENDPROC(ce_aes_ccm_final) + + .macro aes_ccm_do_crypt,enc + ldr x8, [x6, #8] /* load lower ctr */ + ld1 {v0.2d}, [x5] /* load mac */ + rev x8, x8 /* keep swabbed ctr in reg */ +0: /* outer loop */ + ld1 {v1.1d}, [x6] /* load upper ctr */ + prfm pldl1strm, [x1] + add x8, x8, #1 + rev x9, x8 + cmp w4, #12 /* which key size? */ + sub w7, w4, #2 /* get modified # of rounds */ + ins v1.d[1], x9 /* no carry in lower ctr */ + ld1 {v3.2d}, [x3] /* load first round key */ + add x10, x3, #16 + bmi 1f + bne 4f + mov v5.16b, v3.16b + b 3f +1: mov v4.16b, v3.16b + ld1 {v5.2d}, [x10], #16 /* load 2nd round key */ +2: /* inner loop: 3 rounds, 2x interleaved */ + aese v0.16b, v4.16b + aese v1.16b, v4.16b + aesmc v0.16b, v0.16b + aesmc v1.16b, v1.16b +3: ld1 {v3.2d}, [x10], #16 /* load next round key */ + aese v0.16b, v5.16b + aese v1.16b, v5.16b + aesmc v0.16b, v0.16b + aesmc v1.16b, v1.16b +4: ld1 {v4.2d}, [x10], #16 /* load next round key */ + subs w7, w7, #3 + aese v0.16b, v3.16b + aese v1.16b, v3.16b + aesmc v0.16b, v0.16b + aesmc v1.16b, v1.16b + ld1 {v5.2d}, [x10], #16 /* load next round key */ + bpl 2b + aese v0.16b, v4.16b + aese v1.16b, v4.16b + subs w2, w2, #16 + bmi 6f /* partial block? */ + ld1 {v2.16b}, [x1], #16 /* load next input block */ + .if \enc == 1 + eor v2.16b, v2.16b, v5.16b /* final round enc+mac */ + eor v1.16b, v1.16b, v2.16b /* xor with crypted ctr */ + .else + eor v2.16b, v2.16b, v1.16b /* xor with crypted ctr */ + eor v1.16b, v2.16b, v5.16b /* final round enc */ + .endif + eor v0.16b, v0.16b, v2.16b /* xor mac with pt ^ rk[last] */ + st1 {v1.16b}, [x0], #16 /* write output block */ + bne 0b + rev x8, x8 + st1 {v0.2d}, [x5] /* store mac */ + str x8, [x6, #8] /* store lsb end of ctr (BE) */ +5: ret + +6: eor v0.16b, v0.16b, v5.16b /* final round mac */ + eor v1.16b, v1.16b, v5.16b /* final round enc */ + st1 {v0.2d}, [x5] /* store mac */ + add w2, w2, #16 /* process partial tail block */ +7: ldrb w9, [x1], #1 /* get 1 byte of input */ + umov w6, v1.b[0] /* get top crypted ctr byte */ + umov w7, v0.b[0] /* get top mac byte */ + .if \enc == 1 + eor w7, w7, w9 + eor w9, w9, w6 + .else + eor w9, w9, w6 + eor w7, w7, w9 + .endif + strb w9, [x0], #1 /* store out byte */ + strb w7, [x5], #1 /* store mac byte */ + subs w2, w2, #1 + beq 5b + ext v0.16b, v0.16b, v0.16b, #1 /* shift out mac byte */ + ext v1.16b, v1.16b, v1.16b, #1 /* shift out ctr byte */ + b 7b + .endm + + /* + * void ce_aes_ccm_encrypt(u8 out[], u8 const in[], u32 cbytes, + * u8 const rk[], u32 rounds, u8 mac[], + * u8 ctr[]); + * void ce_aes_ccm_decrypt(u8 out[], u8 const in[], u32 cbytes, + * u8 const rk[], u32 rounds, u8 mac[], + * u8 ctr[]); + */ +ENTRY(ce_aes_ccm_encrypt) + aes_ccm_do_crypt 1 +ENDPROC(ce_aes_ccm_encrypt) + +ENTRY(ce_aes_ccm_decrypt) + aes_ccm_do_crypt 0 +ENDPROC(ce_aes_ccm_decrypt) diff --git a/arch/arm64/crypto/aes-ce-ccm-glue.c b/arch/arm64/crypto/aes-ce-ccm-glue.c new file mode 100644 index 000000000000..9e6cdde9b43d --- /dev/null +++ b/arch/arm64/crypto/aes-ce-ccm-glue.c @@ -0,0 +1,297 @@ +/* + * aes-ccm-glue.c - AES-CCM transform for ARMv8 with Crypto Extensions + * + * Copyright (C) 2013 - 2014 Linaro Ltd + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include + +static int num_rounds(struct crypto_aes_ctx *ctx) +{ + /* + * # of rounds specified by AES: + * 128 bit key 10 rounds + * 192 bit key 12 rounds + * 256 bit key 14 rounds + * => n byte key => 6 + (n/4) rounds + */ + return 6 + ctx->key_length / 4; +} + +asmlinkage void ce_aes_ccm_auth_data(u8 mac[], u8 const in[], u32 abytes, + u32 *macp, u32 const rk[], u32 rounds); + +asmlinkage void ce_aes_ccm_encrypt(u8 out[], u8 const in[], u32 cbytes, + u32 const rk[], u32 rounds, u8 mac[], + u8 ctr[]); + +asmlinkage void ce_aes_ccm_decrypt(u8 out[], u8 const in[], u32 cbytes, + u32 const rk[], u32 rounds, u8 mac[], + u8 ctr[]); + +asmlinkage void ce_aes_ccm_final(u8 mac[], u8 const ctr[], u32 const rk[], + u32 rounds); + +static int ccm_setkey(struct crypto_aead *tfm, const u8 *in_key, + unsigned int key_len) +{ + struct crypto_aes_ctx *ctx = crypto_aead_ctx(tfm); + int ret; + + ret = crypto_aes_expand_key(ctx, in_key, key_len); + if (!ret) + return 0; + + tfm->base.crt_flags |= CRYPTO_TFM_RES_BAD_KEY_LEN; + return -EINVAL; +} + +static int ccm_setauthsize(struct crypto_aead *tfm, unsigned int authsize) +{ + if ((authsize & 1) || authsize < 4) + return -EINVAL; + return 0; +} + +static int ccm_init_mac(struct aead_request *req, u8 maciv[], u32 msglen) +{ + struct crypto_aead *aead = crypto_aead_reqtfm(req); + __be32 *n = (__be32 *)&maciv[AES_BLOCK_SIZE - 8]; + u32 l = req->iv[0] + 1; + + /* verify that CCM dimension 'L' is set correctly in the IV */ + if (l < 2 || l > 8) + return -EINVAL; + + /* verify that msglen can in fact be represented in L bytes */ + if (l < 4 && msglen >> (8 * l)) + return -EOVERFLOW; + + /* + * Even if the CCM spec allows L values of up to 8, the Linux cryptoapi + * uses a u32 type to represent msglen so the top 4 bytes are always 0. + */ + n[0] = 0; + n[1] = cpu_to_be32(msglen); + + memcpy(maciv, req->iv, AES_BLOCK_SIZE - l); + + /* + * Meaning of byte 0 according to CCM spec (RFC 3610/NIST 800-38C) + * - bits 0..2 : max # of bytes required to represent msglen, minus 1 + * (already set by caller) + * - bits 3..5 : size of auth tag (1 => 4 bytes, 2 => 6 bytes, etc) + * - bit 6 : indicates presence of authenticate-only data + */ + maciv[0] |= (crypto_aead_authsize(aead) - 2) << 2; + if (req->assoclen) + maciv[0] |= 0x40; + + memset(&req->iv[AES_BLOCK_SIZE - l], 0, l); + return 0; +} + +static void ccm_calculate_auth_mac(struct aead_request *req, u8 mac[]) +{ + struct crypto_aead *aead = crypto_aead_reqtfm(req); + struct crypto_aes_ctx *ctx = crypto_aead_ctx(aead); + struct __packed { __be16 l; __be32 h; u16 len; } ltag; + struct scatter_walk walk; + u32 len = req->assoclen; + u32 macp = 0; + + /* prepend the AAD with a length tag */ + if (len < 0xff00) { + ltag.l = cpu_to_be16(len); + ltag.len = 2; + } else { + ltag.l = cpu_to_be16(0xfffe); + put_unaligned_be32(len, <ag.h); + ltag.len = 6; + } + + ce_aes_ccm_auth_data(mac, (u8 *)<ag, ltag.len, &macp, ctx->key_enc, + num_rounds(ctx)); + scatterwalk_start(&walk, req->assoc); + + do { + u32 n = scatterwalk_clamp(&walk, len); + u8 *p; + + if (!n) { + scatterwalk_start(&walk, sg_next(walk.sg)); + n = scatterwalk_clamp(&walk, len); + } + p = scatterwalk_map(&walk); + ce_aes_ccm_auth_data(mac, p, n, &macp, ctx->key_enc, + num_rounds(ctx)); + len -= n; + + scatterwalk_unmap(p); + scatterwalk_advance(&walk, n); + scatterwalk_done(&walk, 0, len); + } while (len); +} + +static int ccm_encrypt(struct aead_request *req) +{ + struct crypto_aead *aead = crypto_aead_reqtfm(req); + struct crypto_aes_ctx *ctx = crypto_aead_ctx(aead); + struct blkcipher_desc desc = { .info = req->iv }; + struct blkcipher_walk walk; + u8 __aligned(8) mac[AES_BLOCK_SIZE]; + u8 buf[AES_BLOCK_SIZE]; + u32 len = req->cryptlen; + int err; + + err = ccm_init_mac(req, mac, len); + if (err) + return err; + + kernel_neon_begin_partial(6); + + if (req->assoclen) + ccm_calculate_auth_mac(req, mac); + + /* preserve the original iv for the final round */ + memcpy(buf, req->iv, AES_BLOCK_SIZE); + + blkcipher_walk_init(&walk, req->dst, req->src, len); + err = blkcipher_aead_walk_virt_block(&desc, &walk, aead, + AES_BLOCK_SIZE); + + while (walk.nbytes) { + u32 tail = walk.nbytes % AES_BLOCK_SIZE; + + if (walk.nbytes == len) + tail = 0; + + ce_aes_ccm_encrypt(walk.dst.virt.addr, walk.src.virt.addr, + walk.nbytes - tail, ctx->key_enc, + num_rounds(ctx), mac, walk.iv); + + len -= walk.nbytes - tail; + err = blkcipher_walk_done(&desc, &walk, tail); + } + if (!err) + ce_aes_ccm_final(mac, buf, ctx->key_enc, num_rounds(ctx)); + + kernel_neon_end(); + + if (err) + return err; + + /* copy authtag to end of dst */ + scatterwalk_map_and_copy(mac, req->dst, req->cryptlen, + crypto_aead_authsize(aead), 1); + + return 0; +} + +static int ccm_decrypt(struct aead_request *req) +{ + struct crypto_aead *aead = crypto_aead_reqtfm(req); + struct crypto_aes_ctx *ctx = crypto_aead_ctx(aead); + unsigned int authsize = crypto_aead_authsize(aead); + struct blkcipher_desc desc = { .info = req->iv }; + struct blkcipher_walk walk; + u8 __aligned(8) mac[AES_BLOCK_SIZE]; + u8 buf[AES_BLOCK_SIZE]; + u32 len = req->cryptlen - authsize; + int err; + + err = ccm_init_mac(req, mac, len); + if (err) + return err; + + kernel_neon_begin_partial(6); + + if (req->assoclen) + ccm_calculate_auth_mac(req, mac); + + /* preserve the original iv for the final round */ + memcpy(buf, req->iv, AES_BLOCK_SIZE); + + blkcipher_walk_init(&walk, req->dst, req->src, len); + err = blkcipher_aead_walk_virt_block(&desc, &walk, aead, + AES_BLOCK_SIZE); + + while (walk.nbytes) { + u32 tail = walk.nbytes % AES_BLOCK_SIZE; + + if (walk.nbytes == len) + tail = 0; + + ce_aes_ccm_decrypt(walk.dst.virt.addr, walk.src.virt.addr, + walk.nbytes - tail, ctx->key_enc, + num_rounds(ctx), mac, walk.iv); + + len -= walk.nbytes - tail; + err = blkcipher_walk_done(&desc, &walk, tail); + } + if (!err) + ce_aes_ccm_final(mac, buf, ctx->key_enc, num_rounds(ctx)); + + kernel_neon_end(); + + if (err) + return err; + + /* compare calculated auth tag with the stored one */ + scatterwalk_map_and_copy(buf, req->src, req->cryptlen - authsize, + authsize, 0); + + if (memcmp(mac, buf, authsize)) + return -EBADMSG; + return 0; +} + +static struct crypto_alg ccm_aes_alg = { + .cra_name = "ccm(aes)", + .cra_driver_name = "ccm-aes-ce", + .cra_priority = 300, + .cra_flags = CRYPTO_ALG_TYPE_AEAD, + .cra_blocksize = 1, + .cra_ctxsize = sizeof(struct crypto_aes_ctx), + .cra_alignmask = 7, + .cra_type = &crypto_aead_type, + .cra_module = THIS_MODULE, + .cra_aead = { + .ivsize = AES_BLOCK_SIZE, + .maxauthsize = AES_BLOCK_SIZE, + .setkey = ccm_setkey, + .setauthsize = ccm_setauthsize, + .encrypt = ccm_encrypt, + .decrypt = ccm_decrypt, + } +}; + +static int __init aes_mod_init(void) +{ + if (!(elf_hwcap & HWCAP_AES)) + return -ENODEV; + return crypto_register_alg(&ccm_aes_alg); +} + +static void __exit aes_mod_exit(void) +{ + crypto_unregister_alg(&ccm_aes_alg); +} + +module_init(aes_mod_init); +module_exit(aes_mod_exit); + +MODULE_DESCRIPTION("Synchronous AES in CCM mode using ARMv8 Crypto Extensions"); +MODULE_AUTHOR("Ard Biesheuvel "); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("ccm(aes)"); -- cgit v1.2.3 From 2ca10f892f2f6eecdfce7fdea694bbafe6340ced Mon Sep 17 00:00:00 2001 From: Ard Biesheuvel Date: Tue, 24 Sep 2013 09:28:03 +0200 Subject: arm64: pull in from asm-generic Signed-off-by: Ard Biesheuvel --- arch/arm64/include/asm/Kbuild | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm64/include/asm/Kbuild b/arch/arm64/include/asm/Kbuild index 83f71b3004a8..42c7eecd2bb6 100644 --- a/arch/arm64/include/asm/Kbuild +++ b/arch/arm64/include/asm/Kbuild @@ -40,6 +40,7 @@ generic-y += segment.h generic-y += sembuf.h generic-y += serial.h generic-y += shmbuf.h +generic-y += simd.h generic-y += sizes.h generic-y += socket.h generic-y += sockios.h -- cgit v1.2.3 From 49788fe2a128217f78a21ee4edbe6e92e988f222 Mon Sep 17 00:00:00 2001 From: Ard Biesheuvel Date: Fri, 21 Mar 2014 10:19:17 +0100 Subject: arm64/crypto: AES-ECB/CBC/CTR/XTS using ARMv8 NEON and Crypto Extensions This adds ARMv8 implementations of AES in ECB, CBC, CTR and XTS modes, both for ARMv8 with Crypto Extensions and for plain ARMv8 NEON. The Crypto Extensions version can only run on ARMv8 implementations that have support for these optional extensions. The plain NEON version is a table based yet time invariant implementation. All S-box substitutions are performed in parallel, leveraging the wide range of ARMv8's tbl/tbx instructions, and the huge NEON register file, which can comfortably hold the entire S-box and still have room to spare for doing the actual computations. The key expansion routines were borrowed from aes_generic. Signed-off-by: Ard Biesheuvel Acked-by: Herbert Xu --- arch/arm64/crypto/Kconfig | 14 ++ arch/arm64/crypto/Makefile | 14 ++ arch/arm64/crypto/aes-ce.S | 133 +++++++++++ arch/arm64/crypto/aes-glue.c | 446 +++++++++++++++++++++++++++++++++++ arch/arm64/crypto/aes-modes.S | 532 ++++++++++++++++++++++++++++++++++++++++++ arch/arm64/crypto/aes-neon.S | 382 ++++++++++++++++++++++++++++++ 6 files changed, 1521 insertions(+) create mode 100644 arch/arm64/crypto/aes-ce.S create mode 100644 arch/arm64/crypto/aes-glue.c create mode 100644 arch/arm64/crypto/aes-modes.S create mode 100644 arch/arm64/crypto/aes-neon.S diff --git a/arch/arm64/crypto/Kconfig b/arch/arm64/crypto/Kconfig index 8fffd5af65ef..5562652c5316 100644 --- a/arch/arm64/crypto/Kconfig +++ b/arch/arm64/crypto/Kconfig @@ -36,4 +36,18 @@ config CRYPTO_AES_ARM64_CE_CCM select CRYPTO_AES select CRYPTO_AEAD +config CRYPTO_AES_ARM64_CE_BLK + tristate "AES in ECB/CBC/CTR/XTS modes using ARMv8 Crypto Extensions" + depends on ARM64 && KERNEL_MODE_NEON + select CRYPTO_BLKCIPHER + select CRYPTO_AES + select CRYPTO_ABLK_HELPER + +config CRYPTO_AES_ARM64_NEON_BLK + tristate "AES in ECB/CBC/CTR/XTS modes using NEON instructions" + depends on ARM64 && KERNEL_MODE_NEON + select CRYPTO_BLKCIPHER + select CRYPTO_AES + select CRYPTO_ABLK_HELPER + endif diff --git a/arch/arm64/crypto/Makefile b/arch/arm64/crypto/Makefile index 311287d68078..2070a56ecc46 100644 --- a/arch/arm64/crypto/Makefile +++ b/arch/arm64/crypto/Makefile @@ -22,3 +22,17 @@ CFLAGS_aes-ce-cipher.o += -march=armv8-a+crypto obj-$(CONFIG_CRYPTO_AES_ARM64_CE_CCM) += aes-ce-ccm.o aes-ce-ccm-y := aes-ce-ccm-glue.o aes-ce-ccm-core.o + +obj-$(CONFIG_CRYPTO_AES_ARM64_CE_BLK) += aes-ce-blk.o +aes-ce-blk-y := aes-glue-ce.o aes-ce.o + +obj-$(CONFIG_CRYPTO_AES_ARM64_NEON_BLK) += aes-neon-blk.o +aes-neon-blk-y := aes-glue-neon.o aes-neon.o + +AFLAGS_aes-ce.o := -DINTERLEAVE=2 -DINTERLEAVE_INLINE +AFLAGS_aes-neon.o := -DINTERLEAVE=4 + +CFLAGS_aes-glue-ce.o := -DUSE_V8_CRYPTO_EXTENSIONS + +$(obj)/aes-glue-%.o: $(src)/aes-glue.c FORCE + $(call if_changed_dep,cc_o_c) diff --git a/arch/arm64/crypto/aes-ce.S b/arch/arm64/crypto/aes-ce.S new file mode 100644 index 000000000000..685a18f731eb --- /dev/null +++ b/arch/arm64/crypto/aes-ce.S @@ -0,0 +1,133 @@ +/* + * linux/arch/arm64/crypto/aes-ce.S - AES cipher for ARMv8 with + * Crypto Extensions + * + * Copyright (C) 2013 Linaro Ltd + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include + +#define AES_ENTRY(func) ENTRY(ce_ ## func) +#define AES_ENDPROC(func) ENDPROC(ce_ ## func) + + .arch armv8-a+crypto + + /* preload all round keys */ + .macro load_round_keys, rounds, rk + cmp \rounds, #12 + blo 2222f /* 128 bits */ + beq 1111f /* 192 bits */ + ld1 {v17.16b-v18.16b}, [\rk], #32 +1111: ld1 {v19.16b-v20.16b}, [\rk], #32 +2222: ld1 {v21.16b-v24.16b}, [\rk], #64 + ld1 {v25.16b-v28.16b}, [\rk], #64 + ld1 {v29.16b-v31.16b}, [\rk] + .endm + + /* prepare for encryption with key in rk[] */ + .macro enc_prepare, rounds, rk, ignore + load_round_keys \rounds, \rk + .endm + + /* prepare for encryption (again) but with new key in rk[] */ + .macro enc_switch_key, rounds, rk, ignore + load_round_keys \rounds, \rk + .endm + + /* prepare for decryption with key in rk[] */ + .macro dec_prepare, rounds, rk, ignore + load_round_keys \rounds, \rk + .endm + + .macro do_enc_Nx, de, mc, k, i0, i1, i2, i3 + aes\de \i0\().16b, \k\().16b + .ifnb \i1 + aes\de \i1\().16b, \k\().16b + .ifnb \i3 + aes\de \i2\().16b, \k\().16b + aes\de \i3\().16b, \k\().16b + .endif + .endif + aes\mc \i0\().16b, \i0\().16b + .ifnb \i1 + aes\mc \i1\().16b, \i1\().16b + .ifnb \i3 + aes\mc \i2\().16b, \i2\().16b + aes\mc \i3\().16b, \i3\().16b + .endif + .endif + .endm + + /* up to 4 interleaved encryption rounds with the same round key */ + .macro round_Nx, enc, k, i0, i1, i2, i3 + .ifc \enc, e + do_enc_Nx e, mc, \k, \i0, \i1, \i2, \i3 + .else + do_enc_Nx d, imc, \k, \i0, \i1, \i2, \i3 + .endif + .endm + + /* up to 4 interleaved final rounds */ + .macro fin_round_Nx, de, k, k2, i0, i1, i2, i3 + aes\de \i0\().16b, \k\().16b + .ifnb \i1 + aes\de \i1\().16b, \k\().16b + .ifnb \i3 + aes\de \i2\().16b, \k\().16b + aes\de \i3\().16b, \k\().16b + .endif + .endif + eor \i0\().16b, \i0\().16b, \k2\().16b + .ifnb \i1 + eor \i1\().16b, \i1\().16b, \k2\().16b + .ifnb \i3 + eor \i2\().16b, \i2\().16b, \k2\().16b + eor \i3\().16b, \i3\().16b, \k2\().16b + .endif + .endif + .endm + + /* up to 4 interleaved blocks */ + .macro do_block_Nx, enc, rounds, i0, i1, i2, i3 + cmp \rounds, #12 + blo 2222f /* 128 bits */ + beq 1111f /* 192 bits */ + round_Nx \enc, v17, \i0, \i1, \i2, \i3 + round_Nx \enc, v18, \i0, \i1, \i2, \i3 +1111: round_Nx \enc, v19, \i0, \i1, \i2, \i3 + round_Nx \enc, v20, \i0, \i1, \i2, \i3 +2222: .irp key, v21, v22, v23, v24, v25, v26, v27, v28, v29 + round_Nx \enc, \key, \i0, \i1, \i2, \i3 + .endr + fin_round_Nx \enc, v30, v31, \i0, \i1, \i2, \i3 + .endm + + .macro encrypt_block, in, rounds, t0, t1, t2 + do_block_Nx e, \rounds, \in + .endm + + .macro encrypt_block2x, i0, i1, rounds, t0, t1, t2 + do_block_Nx e, \rounds, \i0, \i1 + .endm + + .macro encrypt_block4x, i0, i1, i2, i3, rounds, t0, t1, t2 + do_block_Nx e, \rounds, \i0, \i1, \i2, \i3 + .endm + + .macro decrypt_block, in, rounds, t0, t1, t2 + do_block_Nx d, \rounds, \in + .endm + + .macro decrypt_block2x, i0, i1, rounds, t0, t1, t2 + do_block_Nx d, \rounds, \i0, \i1 + .endm + + .macro decrypt_block4x, i0, i1, i2, i3, rounds, t0, t1, t2 + do_block_Nx d, \rounds, \i0, \i1, \i2, \i3 + .endm + +#include "aes-modes.S" diff --git a/arch/arm64/crypto/aes-glue.c b/arch/arm64/crypto/aes-glue.c new file mode 100644 index 000000000000..60f2f4c12256 --- /dev/null +++ b/arch/arm64/crypto/aes-glue.c @@ -0,0 +1,446 @@ +/* + * linux/arch/arm64/crypto/aes-glue.c - wrapper code for ARMv8 AES + * + * Copyright (C) 2013 Linaro Ltd + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include + +#ifdef USE_V8_CRYPTO_EXTENSIONS +#define MODE "ce" +#define PRIO 300 +#define aes_ecb_encrypt ce_aes_ecb_encrypt +#define aes_ecb_decrypt ce_aes_ecb_decrypt +#define aes_cbc_encrypt ce_aes_cbc_encrypt +#define aes_cbc_decrypt ce_aes_cbc_decrypt +#define aes_ctr_encrypt ce_aes_ctr_encrypt +#define aes_xts_encrypt ce_aes_xts_encrypt +#define aes_xts_decrypt ce_aes_xts_decrypt +MODULE_DESCRIPTION("AES-ECB/CBC/CTR/XTS using ARMv8 Crypto Extensions"); +#else +#define MODE "neon" +#define PRIO 200 +#define aes_ecb_encrypt neon_aes_ecb_encrypt +#define aes_ecb_decrypt neon_aes_ecb_decrypt +#define aes_cbc_encrypt neon_aes_cbc_encrypt +#define aes_cbc_decrypt neon_aes_cbc_decrypt +#define aes_ctr_encrypt neon_aes_ctr_encrypt +#define aes_xts_encrypt neon_aes_xts_encrypt +#define aes_xts_decrypt neon_aes_xts_decrypt +MODULE_DESCRIPTION("AES-ECB/CBC/CTR/XTS using ARMv8 NEON"); +MODULE_ALIAS("ecb(aes)"); +MODULE_ALIAS("cbc(aes)"); +MODULE_ALIAS("ctr(aes)"); +MODULE_ALIAS("xts(aes)"); +#endif + +MODULE_AUTHOR("Ard Biesheuvel "); +MODULE_LICENSE("GPL v2"); + +/* defined in aes-modes.S */ +asmlinkage void aes_ecb_encrypt(u8 out[], u8 const in[], u8 const rk[], + int rounds, int blocks, int first); +asmlinkage void aes_ecb_decrypt(u8 out[], u8 const in[], u8 const rk[], + int rounds, int blocks, int first); + +asmlinkage void aes_cbc_encrypt(u8 out[], u8 const in[], u8 const rk[], + int rounds, int blocks, u8 iv[], int first); +asmlinkage void aes_cbc_decrypt(u8 out[], u8 const in[], u8 const rk[], + int rounds, int blocks, u8 iv[], int first); + +asmlinkage void aes_ctr_encrypt(u8 out[], u8 const in[], u8 const rk[], + int rounds, int blocks, u8 ctr[], int first); + +asmlinkage void aes_xts_encrypt(u8 out[], u8 const in[], u8 const rk1[], + int rounds, int blocks, u8 const rk2[], u8 iv[], + int first); +asmlinkage void aes_xts_decrypt(u8 out[], u8 const in[], u8 const rk1[], + int rounds, int blocks, u8 const rk2[], u8 iv[], + int first); + +struct crypto_aes_xts_ctx { + struct crypto_aes_ctx key1; + struct crypto_aes_ctx __aligned(8) key2; +}; + +static int xts_set_key(struct crypto_tfm *tfm, const u8 *in_key, + unsigned int key_len) +{ + struct crypto_aes_xts_ctx *ctx = crypto_tfm_ctx(tfm); + int ret; + + ret = crypto_aes_expand_key(&ctx->key1, in_key, key_len / 2); + if (!ret) + ret = crypto_aes_expand_key(&ctx->key2, &in_key[key_len / 2], + key_len / 2); + if (!ret) + return 0; + + tfm->crt_flags |= CRYPTO_TFM_RES_BAD_KEY_LEN; + return -EINVAL; +} + +static int ecb_encrypt(struct blkcipher_desc *desc, struct scatterlist *dst, + struct scatterlist *src, unsigned int nbytes) +{ + struct crypto_aes_ctx *ctx = crypto_blkcipher_ctx(desc->tfm); + int err, first, rounds = 6 + ctx->key_length / 4; + struct blkcipher_walk walk; + unsigned int blocks; + + desc->flags &= ~CRYPTO_TFM_REQ_MAY_SLEEP; + blkcipher_walk_init(&walk, dst, src, nbytes); + err = blkcipher_walk_virt(desc, &walk); + + kernel_neon_begin(); + for (first = 1; (blocks = (walk.nbytes / AES_BLOCK_SIZE)); first = 0) { + aes_ecb_encrypt(walk.dst.virt.addr, walk.src.virt.addr, + (u8 *)ctx->key_enc, rounds, blocks, first); + err = blkcipher_walk_done(desc, &walk, 0); + } + kernel_neon_end(); + return err; +} + +static int ecb_decrypt(struct blkcipher_desc *desc, struct scatterlist *dst, + struct scatterlist *src, unsigned int nbytes) +{ + struct crypto_aes_ctx *ctx = crypto_blkcipher_ctx(desc->tfm); + int err, first, rounds = 6 + ctx->key_length / 4; + struct blkcipher_walk walk; + unsigned int blocks; + + desc->flags &= ~CRYPTO_TFM_REQ_MAY_SLEEP; + blkcipher_walk_init(&walk, dst, src, nbytes); + err = blkcipher_walk_virt(desc, &walk); + + kernel_neon_begin(); + for (first = 1; (blocks = (walk.nbytes / AES_BLOCK_SIZE)); first = 0) { + aes_ecb_decrypt(walk.dst.virt.addr, walk.src.virt.addr, + (u8 *)ctx->key_dec, rounds, blocks, first); + err = blkcipher_walk_done(desc, &walk, 0); + } + kernel_neon_end(); + return err; +} + +static int cbc_encrypt(struct blkcipher_desc *desc, struct scatterlist *dst, + struct scatterlist *src, unsigned int nbytes) +{ + struct crypto_aes_ctx *ctx = crypto_blkcipher_ctx(desc->tfm); + int err, first, rounds = 6 + ctx->key_length / 4; + struct blkcipher_walk walk; + unsigned int blocks; + + desc->flags &= ~CRYPTO_TFM_REQ_MAY_SLEEP; + blkcipher_walk_init(&walk, dst, src, nbytes); + err = blkcipher_walk_virt(desc, &walk); + + kernel_neon_begin(); + for (first = 1; (blocks = (walk.nbytes / AES_BLOCK_SIZE)); first = 0) { + aes_cbc_encrypt(walk.dst.virt.addr, walk.src.virt.addr, + (u8 *)ctx->key_enc, rounds, blocks, walk.iv, + first); + err = blkcipher_walk_done(desc, &walk, 0); + } + kernel_neon_end(); + return err; +} + +static int cbc_decrypt(struct blkcipher_desc *desc, struct scatterlist *dst, + struct scatterlist *src, unsigned int nbytes) +{ + struct crypto_aes_ctx *ctx = crypto_blkcipher_ctx(desc->tfm); + int err, first, rounds = 6 + ctx->key_length / 4; + struct blkcipher_walk walk; + unsigned int blocks; + + desc->flags &= ~CRYPTO_TFM_REQ_MAY_SLEEP; + blkcipher_walk_init(&walk, dst, src, nbytes); + err = blkcipher_walk_virt(desc, &walk); + + kernel_neon_begin(); + for (first = 1; (blocks = (walk.nbytes / AES_BLOCK_SIZE)); first = 0) { + aes_cbc_decrypt(walk.dst.virt.addr, walk.src.virt.addr, + (u8 *)ctx->key_dec, rounds, blocks, walk.iv, + first); + err = blkcipher_walk_done(desc, &walk, 0); + } + kernel_neon_end(); + return err; +} + +static int ctr_encrypt(struct blkcipher_desc *desc, struct scatterlist *dst, + struct scatterlist *src, unsigned int nbytes) +{ + struct crypto_aes_ctx *ctx = crypto_blkcipher_ctx(desc->tfm); + int err, first, rounds = 6 + ctx->key_length / 4; + struct blkcipher_walk walk; + int blocks; + + desc->flags &= ~CRYPTO_TFM_REQ_MAY_SLEEP; + blkcipher_walk_init(&walk, dst, src, nbytes); + err = blkcipher_walk_virt_block(desc, &walk, AES_BLOCK_SIZE); + + first = 1; + kernel_neon_begin(); + while ((blocks = (walk.nbytes / AES_BLOCK_SIZE))) { + aes_ctr_encrypt(walk.dst.virt.addr, walk.src.virt.addr, + (u8 *)ctx->key_enc, rounds, blocks, walk.iv, + first); + first = 0; + nbytes -= blocks * AES_BLOCK_SIZE; + if (nbytes && nbytes == walk.nbytes % AES_BLOCK_SIZE) + break; + err = blkcipher_walk_done(desc, &walk, + walk.nbytes % AES_BLOCK_SIZE); + } + if (nbytes) { + u8 *tdst = walk.dst.virt.addr + blocks * AES_BLOCK_SIZE; + u8 *tsrc = walk.src.virt.addr + blocks * AES_BLOCK_SIZE; + u8 __aligned(8) tail[AES_BLOCK_SIZE]; + + /* + * Minimum alignment is 8 bytes, so if nbytes is <= 8, we need + * to tell aes_ctr_encrypt() to only read half a block. + */ + blocks = (nbytes <= 8) ? -1 : 1; + + aes_ctr_encrypt(tail, tsrc, (u8 *)ctx->key_enc, rounds, + blocks, walk.iv, first); + memcpy(tdst, tail, nbytes); + err = blkcipher_walk_done(desc, &walk, 0); + } + kernel_neon_end(); + + return err; +} + +static int xts_encrypt(struct blkcipher_desc *desc, struct scatterlist *dst, + struct scatterlist *src, unsigned int nbytes) +{ + struct crypto_aes_xts_ctx *ctx = crypto_blkcipher_ctx(desc->tfm); + int err, first, rounds = 6 + ctx->key1.key_length / 4; + struct blkcipher_walk walk; + unsigned int blocks; + + desc->flags &= ~CRYPTO_TFM_REQ_MAY_SLEEP; + blkcipher_walk_init(&walk, dst, src, nbytes); + err = blkcipher_walk_virt(desc, &walk); + + kernel_neon_begin(); + for (first = 1; (blocks = (walk.nbytes / AES_BLOCK_SIZE)); first = 0) { + aes_xts_encrypt(walk.dst.virt.addr, walk.src.virt.addr, + (u8 *)ctx->key1.key_enc, rounds, blocks, + (u8 *)ctx->key2.key_enc, walk.iv, first); + err = blkcipher_walk_done(desc, &walk, 0); + } + kernel_neon_end(); + + return err; +} + +static int xts_decrypt(struct blkcipher_desc *desc, struct scatterlist *dst, + struct scatterlist *src, unsigned int nbytes) +{ + struct crypto_aes_xts_ctx *ctx = crypto_blkcipher_ctx(desc->tfm); + int err, first, rounds = 6 + ctx->key1.key_length / 4; + struct blkcipher_walk walk; + unsigned int blocks; + + desc->flags &= ~CRYPTO_TFM_REQ_MAY_SLEEP; + blkcipher_walk_init(&walk, dst, src, nbytes); + err = blkcipher_walk_virt(desc, &walk); + + kernel_neon_begin(); + for (first = 1; (blocks = (walk.nbytes / AES_BLOCK_SIZE)); first = 0) { + aes_xts_decrypt(walk.dst.virt.addr, walk.src.virt.addr, + (u8 *)ctx->key1.key_dec, rounds, blocks, + (u8 *)ctx->key2.key_enc, walk.iv, first); + err = blkcipher_walk_done(desc, &walk, 0); + } + kernel_neon_end(); + + return err; +} + +static struct crypto_alg aes_algs[] = { { + .cra_name = "__ecb-aes-" MODE, + .cra_driver_name = "__driver-ecb-aes-" MODE, + .cra_priority = 0, + .cra_flags = CRYPTO_ALG_TYPE_BLKCIPHER, + .cra_blocksize = AES_BLOCK_SIZE, + .cra_ctxsize = sizeof(struct crypto_aes_ctx), + .cra_alignmask = 7, + .cra_type = &crypto_blkcipher_type, + .cra_module = THIS_MODULE, + .cra_blkcipher = { + .min_keysize = AES_MIN_KEY_SIZE, + .max_keysize = AES_MAX_KEY_SIZE, + .ivsize = AES_BLOCK_SIZE, + .setkey = crypto_aes_set_key, + .encrypt = ecb_encrypt, + .decrypt = ecb_decrypt, + }, +}, { + .cra_name = "__cbc-aes-" MODE, + .cra_driver_name = "__driver-cbc-aes-" MODE, + .cra_priority = 0, + .cra_flags = CRYPTO_ALG_TYPE_BLKCIPHER, + .cra_blocksize = AES_BLOCK_SIZE, + .cra_ctxsize = sizeof(struct crypto_aes_ctx), + .cra_alignmask = 7, + .cra_type = &crypto_blkcipher_type, + .cra_module = THIS_MODULE, + .cra_blkcipher = { + .min_keysize = AES_MIN_KEY_SIZE, + .max_keysize = AES_MAX_KEY_SIZE, + .ivsize = AES_BLOCK_SIZE, + .setkey = crypto_aes_set_key, + .encrypt = cbc_encrypt, + .decrypt = cbc_decrypt, + }, +}, { + .cra_name = "__ctr-aes-" MODE, + .cra_driver_name = "__driver-ctr-aes-" MODE, + .cra_priority = 0, + .cra_flags = CRYPTO_ALG_TYPE_BLKCIPHER, + .cra_blocksize = 1, + .cra_ctxsize = sizeof(struct crypto_aes_ctx), + .cra_alignmask = 7, + .cra_type = &crypto_blkcipher_type, + .cra_module = THIS_MODULE, + .cra_blkcipher = { + .min_keysize = AES_MIN_KEY_SIZE, + .max_keysize = AES_MAX_KEY_SIZE, + .ivsize = AES_BLOCK_SIZE, + .setkey = crypto_aes_set_key, + .encrypt = ctr_encrypt, + .decrypt = ctr_encrypt, + }, +}, { + .cra_name = "__xts-aes-" MODE, + .cra_driver_name = "__driver-xts-aes-" MODE, + .cra_priority = 0, + .cra_flags = CRYPTO_ALG_TYPE_BLKCIPHER, + .cra_blocksize = AES_BLOCK_SIZE, + .cra_ctxsize = sizeof(struct crypto_aes_xts_ctx), + .cra_alignmask = 7, + .cra_type = &crypto_blkcipher_type, + .cra_module = THIS_MODULE, + .cra_blkcipher = { + .min_keysize = 2 * AES_MIN_KEY_SIZE, + .max_keysize = 2 * AES_MAX_KEY_SIZE, + .ivsize = AES_BLOCK_SIZE, + .setkey = xts_set_key, + .encrypt = xts_encrypt, + .decrypt = xts_decrypt, + }, +}, { + .cra_name = "ecb(aes)", + .cra_driver_name = "ecb-aes-" MODE, + .cra_priority = PRIO, + .cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER|CRYPTO_ALG_ASYNC, + .cra_blocksize = AES_BLOCK_SIZE, + .cra_ctxsize = sizeof(struct async_helper_ctx), + .cra_alignmask = 7, + .cra_type = &crypto_ablkcipher_type, + .cra_module = THIS_MODULE, + .cra_init = ablk_init, + .cra_exit = ablk_exit, + .cra_ablkcipher = { + .min_keysize = AES_MIN_KEY_SIZE, + .max_keysize = AES_MAX_KEY_SIZE, + .ivsize = AES_BLOCK_SIZE, + .setkey = ablk_set_key, + .encrypt = ablk_encrypt, + .decrypt = ablk_decrypt, + } +}, { + .cra_name = "cbc(aes)", + .cra_driver_name = "cbc-aes-" MODE, + .cra_priority = PRIO, + .cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER|CRYPTO_ALG_ASYNC, + .cra_blocksize = AES_BLOCK_SIZE, + .cra_ctxsize = sizeof(struct async_helper_ctx), + .cra_alignmask = 7, + .cra_type = &crypto_ablkcipher_type, + .cra_module = THIS_MODULE, + .cra_init = ablk_init, + .cra_exit = ablk_exit, + .cra_ablkcipher = { + .min_keysize = AES_MIN_KEY_SIZE, + .max_keysize = AES_MAX_KEY_SIZE, + .ivsize = AES_BLOCK_SIZE, + .setkey = ablk_set_key, + .encrypt = ablk_encrypt, + .decrypt = ablk_decrypt, + } +}, { + .cra_name = "ctr(aes)", + .cra_driver_name = "ctr-aes-" MODE, + .cra_priority = PRIO, + .cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER|CRYPTO_ALG_ASYNC, + .cra_blocksize = 1, + .cra_ctxsize = sizeof(struct async_helper_ctx), + .cra_alignmask = 7, + .cra_type = &crypto_ablkcipher_type, + .cra_module = THIS_MODULE, + .cra_init = ablk_init, + .cra_exit = ablk_exit, + .cra_ablkcipher = { + .min_keysize = AES_MIN_KEY_SIZE, + .max_keysize = AES_MAX_KEY_SIZE, + .ivsize = AES_BLOCK_SIZE, + .setkey = ablk_set_key, + .encrypt = ablk_encrypt, + .decrypt = ablk_decrypt, + } +}, { + .cra_name = "xts(aes)", + .cra_driver_name = "xts-aes-" MODE, + .cra_priority = PRIO, + .cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER|CRYPTO_ALG_ASYNC, + .cra_blocksize = AES_BLOCK_SIZE, + .cra_ctxsize = sizeof(struct async_helper_ctx), + .cra_alignmask = 7, + .cra_type = &crypto_ablkcipher_type, + .cra_module = THIS_MODULE, + .cra_init = ablk_init, + .cra_exit = ablk_exit, + .cra_ablkcipher = { + .min_keysize = 2 * AES_MIN_KEY_SIZE, + .max_keysize = 2 * AES_MAX_KEY_SIZE, + .ivsize = AES_BLOCK_SIZE, + .setkey = ablk_set_key, + .encrypt = ablk_encrypt, + .decrypt = ablk_decrypt, + } +} }; + +static int __init aes_init(void) +{ + return crypto_register_algs(aes_algs, ARRAY_SIZE(aes_algs)); +} + +static void __exit aes_exit(void) +{ + crypto_unregister_algs(aes_algs, ARRAY_SIZE(aes_algs)); +} + +#ifdef USE_V8_CRYPTO_EXTENSIONS +module_cpu_feature_match(AES, aes_init); +#else +module_init(aes_init); +#endif +module_exit(aes_exit); diff --git a/arch/arm64/crypto/aes-modes.S b/arch/arm64/crypto/aes-modes.S new file mode 100644 index 000000000000..f6e372c528eb --- /dev/null +++ b/arch/arm64/crypto/aes-modes.S @@ -0,0 +1,532 @@ +/* + * linux/arch/arm64/crypto/aes-modes.S - chaining mode wrappers for AES + * + * Copyright (C) 2013 Linaro Ltd + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* included by aes-ce.S and aes-neon.S */ + + .text + .align 4 + +/* + * There are several ways to instantiate this code: + * - no interleave, all inline + * - 2-way interleave, 2x calls out of line (-DINTERLEAVE=2) + * - 2-way interleave, all inline (-DINTERLEAVE=2 -DINTERLEAVE_INLINE) + * - 4-way interleave, 4x calls out of line (-DINTERLEAVE=4) + * - 4-way interleave, all inline (-DINTERLEAVE=4 -DINTERLEAVE_INLINE) + * + * Macros imported by this code: + * - enc_prepare - setup NEON registers for encryption + * - dec_prepare - setup NEON registers for decryption + * - enc_switch_key - change to new key after having prepared for encryption + * - encrypt_block - encrypt a single block + * - decrypt block - decrypt a single block + * - encrypt_block2x - encrypt 2 blocks in parallel (if INTERLEAVE == 2) + * - decrypt_block2x - decrypt 2 blocks in parallel (if INTERLEAVE == 2) + * - encrypt_block4x - encrypt 4 blocks in parallel (if INTERLEAVE == 4) + * - decrypt_block4x - decrypt 4 blocks in parallel (if INTERLEAVE == 4) + */ + +#if defined(INTERLEAVE) && !defined(INTERLEAVE_INLINE) +#define FRAME_PUSH stp x29, x30, [sp,#-16]! ; mov x29, sp +#define FRAME_POP ldp x29, x30, [sp],#16 + +#if INTERLEAVE == 2 + +aes_encrypt_block2x: + encrypt_block2x v0, v1, w3, x2, x6, w7 + ret +ENDPROC(aes_encrypt_block2x) + +aes_decrypt_block2x: + decrypt_block2x v0, v1, w3, x2, x6, w7 + ret +ENDPROC(aes_decrypt_block2x) + +#elif INTERLEAVE == 4 + +aes_encrypt_block4x: + encrypt_block4x v0, v1, v2, v3, w3, x2, x6, w7 + ret +ENDPROC(aes_encrypt_block4x) + +aes_decrypt_block4x: + decrypt_block4x v0, v1, v2, v3, w3, x2, x6, w7 + ret +ENDPROC(aes_decrypt_block4x) + +#else +#error INTERLEAVE should equal 2 or 4 +#endif + + .macro do_encrypt_block2x + bl aes_encrypt_block2x + .endm + + .macro do_decrypt_block2x + bl aes_decrypt_block2x + .endm + + .macro do_encrypt_block4x + bl aes_encrypt_block4x + .endm + + .macro do_decrypt_block4x + bl aes_decrypt_block4x + .endm + +#else +#define FRAME_PUSH +#define FRAME_POP + + .macro do_encrypt_block2x + encrypt_block2x v0, v1, w3, x2, x6, w7 + .endm + + .macro do_decrypt_block2x + decrypt_block2x v0, v1, w3, x2, x6, w7 + .endm + + .macro do_encrypt_block4x + encrypt_block4x v0, v1, v2, v3, w3, x2, x6, w7 + .endm + + .macro do_decrypt_block4x + decrypt_block4x v0, v1, v2, v3, w3, x2, x6, w7 + .endm + +#endif + + /* + * aes_ecb_encrypt(u8 out[], u8 const in[], u8 const rk[], int rounds, + * int blocks, int first) + * aes_ecb_decrypt(u8 out[], u8 const in[], u8 const rk[], int rounds, + * int blocks, int first) + */ + +AES_ENTRY(aes_ecb_encrypt) + FRAME_PUSH + cbz w5, .LecbencloopNx + + enc_prepare w3, x2, x5 + +.LecbencloopNx: +#if INTERLEAVE >= 2 + subs w4, w4, #INTERLEAVE + bmi .Lecbenc1x +#if INTERLEAVE == 2 + ld1 {v0.16b-v1.16b}, [x1], #32 /* get 2 pt blocks */ + do_encrypt_block2x + st1 {v0.16b-v1.16b}, [x0], #32 +#else + ld1 {v0.16b-v3.16b}, [x1], #64 /* get 4 pt blocks */ + do_encrypt_block4x + st1 {v0.16b-v3.16b}, [x0], #64 +#endif + b .LecbencloopNx +.Lecbenc1x: + adds w4, w4, #INTERLEAVE + beq .Lecbencout +#endif +.Lecbencloop: + ld1 {v0.16b}, [x1], #16 /* get next pt block */ + encrypt_block v0, w3, x2, x5, w6 + st1 {v0.16b}, [x0], #16 + subs w4, w4, #1 + bne .Lecbencloop +.Lecbencout: + FRAME_POP + ret +AES_ENDPROC(aes_ecb_encrypt) + + +AES_ENTRY(aes_ecb_decrypt) + FRAME_PUSH + cbz w5, .LecbdecloopNx + + dec_prepare w3, x2, x5 + +.LecbdecloopNx: +#if INTERLEAVE >= 2 + subs w4, w4, #INTERLEAVE + bmi .Lecbdec1x +#if INTERLEAVE == 2 + ld1 {v0.16b-v1.16b}, [x1], #32 /* get 2 ct blocks */ + do_decrypt_block2x + st1 {v0.16b-v1.16b}, [x0], #32 +#else + ld1 {v0.16b-v3.16b}, [x1], #64 /* get 4 ct blocks */ + do_decrypt_block4x + st1 {v0.16b-v3.16b}, [x0], #64 +#endif + b .LecbdecloopNx +.Lecbdec1x: + adds w4, w4, #INTERLEAVE + beq .Lecbdecout +#endif +.Lecbdecloop: + ld1 {v0.16b}, [x1], #16 /* get next ct block */ + decrypt_block v0, w3, x2, x5, w6 + st1 {v0.16b}, [x0], #16 + subs w4, w4, #1 + bne .Lecbdecloop +.Lecbdecout: + FRAME_POP + ret +AES_ENDPROC(aes_ecb_decrypt) + + + /* + * aes_cbc_encrypt(u8 out[], u8 const in[], u8 const rk[], int rounds, + * int blocks, u8 iv[], int first) + * aes_cbc_decrypt(u8 out[], u8 const in[], u8 const rk[], int rounds, + * int blocks, u8 iv[], int first) + */ + +AES_ENTRY(aes_cbc_encrypt) + cbz w6, .Lcbcencloop + + ld1 {v0.16b}, [x5] /* get iv */ + enc_prepare w3, x2, x5 + +.Lcbcencloop: + ld1 {v1.16b}, [x1], #16 /* get next pt block */ + eor v0.16b, v0.16b, v1.16b /* ..and xor with iv */ + encrypt_block v0, w3, x2, x5, w6 + st1 {v0.16b}, [x0], #16 + subs w4, w4, #1 + bne .Lcbcencloop + ret +AES_ENDPROC(aes_cbc_encrypt) + + +AES_ENTRY(aes_cbc_decrypt) + FRAME_PUSH + cbz w6, .LcbcdecloopNx + + ld1 {v7.16b}, [x5] /* get iv */ + dec_prepare w3, x2, x5 + +.LcbcdecloopNx: +#if INTERLEAVE >= 2 + subs w4, w4, #INTERLEAVE + bmi .Lcbcdec1x +#if INTERLEAVE == 2 + ld1 {v0.16b-v1.16b}, [x1], #32 /* get 2 ct blocks */ + mov v2.16b, v0.16b + mov v3.16b, v1.16b + do_decrypt_block2x + eor v0.16b, v0.16b, v7.16b + eor v1.16b, v1.16b, v2.16b + mov v7.16b, v3.16b + st1 {v0.16b-v1.16b}, [x0], #32 +#else + ld1 {v0.16b-v3.16b}, [x1], #64 /* get 4 ct blocks */ + mov v4.16b, v0.16b + mov v5.16b, v1.16b + mov v6.16b, v2.16b + do_decrypt_block4x + sub x1, x1, #16 + eor v0.16b, v0.16b, v7.16b + eor v1.16b, v1.16b, v4.16b + ld1 {v7.16b}, [x1], #16 /* reload 1 ct block */ + eor v2.16b, v2.16b, v5.16b + eor v3.16b, v3.16b, v6.16b + st1 {v0.16b-v3.16b}, [x0], #64 +#endif + b .LcbcdecloopNx +.Lcbcdec1x: + adds w4, w4, #INTERLEAVE + beq .Lcbcdecout +#endif +.Lcbcdecloop: + ld1 {v1.16b}, [x1], #16 /* get next ct block */ + mov v0.16b, v1.16b /* ...and copy to v0 */ + decrypt_block v0, w3, x2, x5, w6 + eor v0.16b, v0.16b, v7.16b /* xor with iv => pt */ + mov v7.16b, v1.16b /* ct is next iv */ + st1 {v0.16b}, [x0], #16 + subs w4, w4, #1 + bne .Lcbcdecloop +.Lcbcdecout: + FRAME_POP + ret +AES_ENDPROC(aes_cbc_decrypt) + + + /* + * aes_ctr_encrypt(u8 out[], u8 const in[], u8 const rk[], int rounds, + * int blocks, u8 ctr[], int first) + */ + +AES_ENTRY(aes_ctr_encrypt) + FRAME_PUSH + cbnz w6, .Lctrfirst /* 1st time around? */ + umov x5, v4.d[1] /* keep swabbed ctr in reg */ + rev x5, x5 +#if INTERLEAVE >= 2 + cmn w5, w4 /* 32 bit overflow? */ + bcs .Lctrinc + add x5, x5, #1 /* increment BE ctr */ + b .LctrincNx +#else + b .Lctrinc +#endif +.Lctrfirst: + enc_prepare w3, x2, x6 + ld1 {v4.16b}, [x5] + umov x5, v4.d[1] /* keep swabbed ctr in reg */ + rev x5, x5 +#if INTERLEAVE >= 2 + cmn w5, w4 /* 32 bit overflow? */ + bcs .Lctrloop +.LctrloopNx: + subs w4, w4, #INTERLEAVE + bmi .Lctr1x +#if INTERLEAVE == 2 + mov v0.8b, v4.8b + mov v1.8b, v4.8b + rev x7, x5 + add x5, x5, #1 + ins v0.d[1], x7 + rev x7, x5 + add x5, x5, #1 + ins v1.d[1], x7 + ld1 {v2.16b-v3.16b}, [x1], #32 /* get 2 input blocks */ + do_encrypt_block2x + eor v0.16b, v0.16b, v2.16b + eor v1.16b, v1.16b, v3.16b + st1 {v0.16b-v1.16b}, [x0], #32 +#else + ldr q8, =0x30000000200000001 /* addends 1,2,3[,0] */ + dup v7.4s, w5 + mov v0.16b, v4.16b + add v7.4s, v7.4s, v8.4s + mov v1.16b, v4.16b + rev32 v8.16b, v7.16b + mov v2.16b, v4.16b + mov v3.16b, v4.16b + mov v1.s[3], v8.s[0] + mov v2.s[3], v8.s[1] + mov v3.s[3], v8.s[2] + ld1 {v5.16b-v7.16b}, [x1], #48 /* get 3 input blocks */ + do_encrypt_block4x + eor v0.16b, v5.16b, v0.16b + ld1 {v5.16b}, [x1], #16 /* get 1 input block */ + eor v1.16b, v6.16b, v1.16b + eor v2.16b, v7.16b, v2.16b + eor v3.16b, v5.16b, v3.16b + st1 {v0.16b-v3.16b}, [x0], #64 + add x5, x5, #INTERLEAVE +#endif + cbz w4, .LctroutNx +.LctrincNx: + rev x7, x5 + ins v4.d[1], x7 + b .LctrloopNx +.LctroutNx: + sub x5, x5, #1 + rev x7, x5 + ins v4.d[1], x7 + b .Lctrout +.Lctr1x: + adds w4, w4, #INTERLEAVE + beq .Lctrout +#endif +.Lctrloop: + mov v0.16b, v4.16b + encrypt_block v0, w3, x2, x6, w7 + subs w4, w4, #1 + bmi .Lctrhalfblock /* blocks < 0 means 1/2 block */ + ld1 {v3.16b}, [x1], #16 + eor v3.16b, v0.16b, v3.16b + st1 {v3.16b}, [x0], #16 + beq .Lctrout +.Lctrinc: + adds x5, x5, #1 /* increment BE ctr */ + rev x7, x5 + ins v4.d[1], x7 + bcc .Lctrloop /* no overflow? */ + umov x7, v4.d[0] /* load upper word of ctr */ + rev x7, x7 /* ... to handle the carry */ + add x7, x7, #1 + rev x7, x7 + ins v4.d[0], x7 + b .Lctrloop +.Lctrhalfblock: + ld1 {v3.8b}, [x1] + eor v3.8b, v0.8b, v3.8b + st1 {v3.8b}, [x0] +.Lctrout: + FRAME_POP + ret +AES_ENDPROC(aes_ctr_encrypt) + .ltorg + + + /* + * aes_xts_decrypt(u8 out[], u8 const in[], u8 const rk1[], int rounds, + * int blocks, u8 const rk2[], u8 iv[], int first) + * aes_xts_decrypt(u8 out[], u8 const in[], u8 const rk1[], int rounds, + * int blocks, u8 const rk2[], u8 iv[], int first) + */ + + .macro next_tweak, out, in, const, tmp + sshr \tmp\().2d, \in\().2d, #63 + and \tmp\().16b, \tmp\().16b, \const\().16b + add \out\().2d, \in\().2d, \in\().2d + ext \tmp\().16b, \tmp\().16b, \tmp\().16b, #8 + eor \out\().16b, \out\().16b, \tmp\().16b + .endm + +.Lxts_mul_x: + .word 1, 0, 0x87, 0 + +AES_ENTRY(aes_xts_encrypt) + FRAME_PUSH + cbz w7, .LxtsencloopNx + + ld1 {v4.16b}, [x6] + enc_prepare w3, x5, x6 + encrypt_block v4, w3, x5, x6, w7 /* first tweak */ + enc_switch_key w3, x2, x6 + ldr q7, .Lxts_mul_x + b .LxtsencNx + +.LxtsencloopNx: + ldr q7, .Lxts_mul_x + next_tweak v4, v4, v7, v8 +.LxtsencNx: +#if INTERLEAVE >= 2 + subs w4, w4, #INTERLEAVE + bmi .Lxtsenc1x +#if INTERLEAVE == 2 + ld1 {v0.16b-v1.16b}, [x1], #32 /* get 2 pt blocks */ + next_tweak v5, v4, v7, v8 + eor v0.16b, v0.16b, v4.16b + eor v1.16b, v1.16b, v5.16b + do_encrypt_block2x + eor v0.16b, v0.16b, v4.16b + eor v1.16b, v1.16b, v5.16b + st1 {v0.16b-v1.16b}, [x0], #32 + cbz w4, .LxtsencoutNx + next_tweak v4, v5, v7, v8 + b .LxtsencNx +.LxtsencoutNx: + mov v4.16b, v5.16b + b .Lxtsencout +#else + ld1 {v0.16b-v3.16b}, [x1], #64 /* get 4 pt blocks */ + next_tweak v5, v4, v7, v8 + eor v0.16b, v0.16b, v4.16b + next_tweak v6, v5, v7, v8 + eor v1.16b, v1.16b, v5.16b + eor v2.16b, v2.16b, v6.16b + next_tweak v7, v6, v7, v8 + eor v3.16b, v3.16b, v7.16b + do_encrypt_block4x + eor v3.16b, v3.16b, v7.16b + eor v0.16b, v0.16b, v4.16b + eor v1.16b, v1.16b, v5.16b + eor v2.16b, v2.16b, v6.16b + st1 {v0.16b-v3.16b}, [x0], #64 + mov v4.16b, v7.16b + cbz w4, .Lxtsencout + b .LxtsencloopNx +#endif +.Lxtsenc1x: + adds w4, w4, #INTERLEAVE + beq .Lxtsencout +#endif +.Lxtsencloop: + ld1 {v1.16b}, [x1], #16 + eor v0.16b, v1.16b, v4.16b + encrypt_block v0, w3, x2, x6, w7 + eor v0.16b, v0.16b, v4.16b + st1 {v0.16b}, [x0], #16 + subs w4, w4, #1 + beq .Lxtsencout + next_tweak v4, v4, v7, v8 + b .Lxtsencloop +.Lxtsencout: + FRAME_POP + ret +AES_ENDPROC(aes_xts_encrypt) + + +AES_ENTRY(aes_xts_decrypt) + FRAME_PUSH + cbz w7, .LxtsdecloopNx + + ld1 {v4.16b}, [x6] + enc_prepare w3, x5, x6 + encrypt_block v4, w3, x5, x6, w7 /* first tweak */ + dec_prepare w3, x2, x6 + ldr q7, .Lxts_mul_x + b .LxtsdecNx + +.LxtsdecloopNx: + ldr q7, .Lxts_mul_x + next_tweak v4, v4, v7, v8 +.LxtsdecNx: +#if INTERLEAVE >= 2 + subs w4, w4, #INTERLEAVE + bmi .Lxtsdec1x +#if INTERLEAVE == 2 + ld1 {v0.16b-v1.16b}, [x1], #32 /* get 2 ct blocks */ + next_tweak v5, v4, v7, v8 + eor v0.16b, v0.16b, v4.16b + eor v1.16b, v1.16b, v5.16b + do_decrypt_block2x + eor v0.16b, v0.16b, v4.16b + eor v1.16b, v1.16b, v5.16b + st1 {v0.16b-v1.16b}, [x0], #32 + cbz w4, .LxtsdecoutNx + next_tweak v4, v5, v7, v8 + b .LxtsdecNx +.LxtsdecoutNx: + mov v4.16b, v5.16b + b .Lxtsdecout +#else + ld1 {v0.16b-v3.16b}, [x1], #64 /* get 4 ct blocks */ + next_tweak v5, v4, v7, v8 + eor v0.16b, v0.16b, v4.16b + next_tweak v6, v5, v7, v8 + eor v1.16b, v1.16b, v5.16b + eor v2.16b, v2.16b, v6.16b + next_tweak v7, v6, v7, v8 + eor v3.16b, v3.16b, v7.16b + do_decrypt_block4x + eor v3.16b, v3.16b, v7.16b + eor v0.16b, v0.16b, v4.16b + eor v1.16b, v1.16b, v5.16b + eor v2.16b, v2.16b, v6.16b + st1 {v0.16b-v3.16b}, [x0], #64 + mov v4.16b, v7.16b + cbz w4, .Lxtsdecout + b .LxtsdecloopNx +#endif +.Lxtsdec1x: + adds w4, w4, #INTERLEAVE + beq .Lxtsdecout +#endif +.Lxtsdecloop: + ld1 {v1.16b}, [x1], #16 + eor v0.16b, v1.16b, v4.16b + decrypt_block v0, w3, x2, x6, w7 + eor v0.16b, v0.16b, v4.16b + st1 {v0.16b}, [x0], #16 + subs w4, w4, #1 + beq .Lxtsdecout + next_tweak v4, v4, v7, v8 + b .Lxtsdecloop +.Lxtsdecout: + FRAME_POP + ret +AES_ENDPROC(aes_xts_decrypt) diff --git a/arch/arm64/crypto/aes-neon.S b/arch/arm64/crypto/aes-neon.S new file mode 100644 index 000000000000..b93170e1cc93 --- /dev/null +++ b/arch/arm64/crypto/aes-neon.S @@ -0,0 +1,382 @@ +/* + * linux/arch/arm64/crypto/aes-neon.S - AES cipher for ARMv8 NEON + * + * Copyright (C) 2013 Linaro Ltd + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include + +#define AES_ENTRY(func) ENTRY(neon_ ## func) +#define AES_ENDPROC(func) ENDPROC(neon_ ## func) + + /* multiply by polynomial 'x' in GF(2^8) */ + .macro mul_by_x, out, in, temp, const + sshr \temp, \in, #7 + add \out, \in, \in + and \temp, \temp, \const + eor \out, \out, \temp + .endm + + /* preload the entire Sbox */ + .macro prepare, sbox, shiftrows, temp + adr \temp, \sbox + movi v12.16b, #0x40 + ldr q13, \shiftrows + movi v14.16b, #0x1b + ld1 {v16.16b-v19.16b}, [\temp], #64 + ld1 {v20.16b-v23.16b}, [\temp], #64 + ld1 {v24.16b-v27.16b}, [\temp], #64 + ld1 {v28.16b-v31.16b}, [\temp] + .endm + + /* do preload for encryption */ + .macro enc_prepare, ignore0, ignore1, temp + prepare .LForward_Sbox, .LForward_ShiftRows, \temp + .endm + + .macro enc_switch_key, ignore0, ignore1, temp + /* do nothing */ + .endm + + /* do preload for decryption */ + .macro dec_prepare, ignore0, ignore1, temp + prepare .LReverse_Sbox, .LReverse_ShiftRows, \temp + .endm + + /* apply SubBytes transformation using the the preloaded Sbox */ + .macro sub_bytes, in + sub v9.16b, \in\().16b, v12.16b + tbl \in\().16b, {v16.16b-v19.16b}, \in\().16b + sub v10.16b, v9.16b, v12.16b + tbx \in\().16b, {v20.16b-v23.16b}, v9.16b + sub v11.16b, v10.16b, v12.16b + tbx \in\().16b, {v24.16b-v27.16b}, v10.16b + tbx \in\().16b, {v28.16b-v31.16b}, v11.16b + .endm + + /* apply MixColumns transformation */ + .macro mix_columns, in + mul_by_x v10.16b, \in\().16b, v9.16b, v14.16b + rev32 v8.8h, \in\().8h + eor \in\().16b, v10.16b, \in\().16b + shl v9.4s, v8.4s, #24 + shl v11.4s, \in\().4s, #24 + sri v9.4s, v8.4s, #8 + sri v11.4s, \in\().4s, #8 + eor v9.16b, v9.16b, v8.16b + eor v10.16b, v10.16b, v9.16b + eor \in\().16b, v10.16b, v11.16b + .endm + + /* Inverse MixColumns: pre-multiply by { 5, 0, 4, 0 } */ + .macro inv_mix_columns, in + mul_by_x v11.16b, \in\().16b, v10.16b, v14.16b + mul_by_x v11.16b, v11.16b, v10.16b, v14.16b + eor \in\().16b, \in\().16b, v11.16b + rev32 v11.8h, v11.8h + eor \in\().16b, \in\().16b, v11.16b + mix_columns \in + .endm + + .macro do_block, enc, in, rounds, rk, rkp, i + ld1 {v15.16b}, [\rk] + add \rkp, \rk, #16 + mov \i, \rounds +1111: eor \in\().16b, \in\().16b, v15.16b /* ^round key */ + tbl \in\().16b, {\in\().16b}, v13.16b /* ShiftRows */ + sub_bytes \in + ld1 {v15.16b}, [\rkp], #16 + subs \i, \i, #1 + beq 2222f + .if \enc == 1 + mix_columns \in + .else + inv_mix_columns \in + .endif + b 1111b +2222: eor \in\().16b, \in\().16b, v15.16b /* ^round key */ + .endm + + .macro encrypt_block, in, rounds, rk, rkp, i + do_block 1, \in, \rounds, \rk, \rkp, \i + .endm + + .macro decrypt_block, in, rounds, rk, rkp, i + do_block 0, \in, \rounds, \rk, \rkp, \i + .endm + + /* + * Interleaved versions: functionally equivalent to the + * ones above, but applied to 2 or 4 AES states in parallel. + */ + + .macro sub_bytes_2x, in0, in1 + sub v8.16b, \in0\().16b, v12.16b + sub v9.16b, \in1\().16b, v12.16b + tbl \in0\().16b, {v16.16b-v19.16b}, \in0\().16b + tbl \in1\().16b, {v16.16b-v19.16b}, \in1\().16b + sub v10.16b, v8.16b, v12.16b + sub v11.16b, v9.16b, v12.16b + tbx \in0\().16b, {v20.16b-v23.16b}, v8.16b + tbx \in1\().16b, {v20.16b-v23.16b}, v9.16b + sub v8.16b, v10.16b, v12.16b + sub v9.16b, v11.16b, v12.16b + tbx \in0\().16b, {v24.16b-v27.16b}, v10.16b + tbx \in1\().16b, {v24.16b-v27.16b}, v11.16b + tbx \in0\().16b, {v28.16b-v31.16b}, v8.16b + tbx \in1\().16b, {v28.16b-v31.16b}, v9.16b + .endm + + .macro sub_bytes_4x, in0, in1, in2, in3 + sub v8.16b, \in0\().16b, v12.16b + tbl \in0\().16b, {v16.16b-v19.16b}, \in0\().16b + sub v9.16b, \in1\().16b, v12.16b + tbl \in1\().16b, {v16.16b-v19.16b}, \in1\().16b + sub v10.16b, \in2\().16b, v12.16b + tbl \in2\().16b, {v16.16b-v19.16b}, \in2\().16b + sub v11.16b, \in3\().16b, v12.16b + tbl \in3\().16b, {v16.16b-v19.16b}, \in3\().16b + tbx \in0\().16b, {v20.16b-v23.16b}, v8.16b + tbx \in1\().16b, {v20.16b-v23.16b}, v9.16b + sub v8.16b, v8.16b, v12.16b + tbx \in2\().16b, {v20.16b-v23.16b}, v10.16b + sub v9.16b, v9.16b, v12.16b + tbx \in3\().16b, {v20.16b-v23.16b}, v11.16b + sub v10.16b, v10.16b, v12.16b + tbx \in0\().16b, {v24.16b-v27.16b}, v8.16b + sub v11.16b, v11.16b, v12.16b + tbx \in1\().16b, {v24.16b-v27.16b}, v9.16b + sub v8.16b, v8.16b, v12.16b + tbx \in2\().16b, {v24.16b-v27.16b}, v10.16b + sub v9.16b, v9.16b, v12.16b + tbx \in3\().16b, {v24.16b-v27.16b}, v11.16b + sub v10.16b, v10.16b, v12.16b + tbx \in0\().16b, {v28.16b-v31.16b}, v8.16b + sub v11.16b, v11.16b, v12.16b + tbx \in1\().16b, {v28.16b-v31.16b}, v9.16b + tbx \in2\().16b, {v28.16b-v31.16b}, v10.16b + tbx \in3\().16b, {v28.16b-v31.16b}, v11.16b + .endm + + .macro mul_by_x_2x, out0, out1, in0, in1, tmp0, tmp1, const + sshr \tmp0\().16b, \in0\().16b, #7 + add \out0\().16b, \in0\().16b, \in0\().16b + sshr \tmp1\().16b, \in1\().16b, #7 + and \tmp0\().16b, \tmp0\().16b, \const\().16b + add \out1\().16b, \in1\().16b, \in1\().16b + and \tmp1\().16b, \tmp1\().16b, \const\().16b + eor \out0\().16b, \out0\().16b, \tmp0\().16b + eor \out1\().16b, \out1\().16b, \tmp1\().16b + .endm + + .macro mix_columns_2x, in0, in1 + mul_by_x_2x v8, v9, \in0, \in1, v10, v11, v14 + rev32 v10.8h, \in0\().8h + rev32 v11.8h, \in1\().8h + eor \in0\().16b, v8.16b, \in0\().16b + eor \in1\().16b, v9.16b, \in1\().16b + shl v12.4s, v10.4s, #24 + shl v13.4s, v11.4s, #24 + eor v8.16b, v8.16b, v10.16b + sri v12.4s, v10.4s, #8 + shl v10.4s, \in0\().4s, #24 + eor v9.16b, v9.16b, v11.16b + sri v13.4s, v11.4s, #8 + shl v11.4s, \in1\().4s, #24 + sri v10.4s, \in0\().4s, #8 + eor \in0\().16b, v8.16b, v12.16b + sri v11.4s, \in1\().4s, #8 + eor \in1\().16b, v9.16b, v13.16b + eor \in0\().16b, v10.16b, \in0\().16b + eor \in1\().16b, v11.16b, \in1\().16b + .endm + + .macro inv_mix_cols_2x, in0, in1 + mul_by_x_2x v8, v9, \in0, \in1, v10, v11, v14 + mul_by_x_2x v8, v9, v8, v9, v10, v11, v14 + eor \in0\().16b, \in0\().16b, v8.16b + eor \in1\().16b, \in1\().16b, v9.16b + rev32 v8.8h, v8.8h + rev32 v9.8h, v9.8h + eor \in0\().16b, \in0\().16b, v8.16b + eor \in1\().16b, \in1\().16b, v9.16b + mix_columns_2x \in0, \in1 + .endm + + .macro inv_mix_cols_4x, in0, in1, in2, in3 + mul_by_x_2x v8, v9, \in0, \in1, v10, v11, v14 + mul_by_x_2x v10, v11, \in2, \in3, v12, v13, v14 + mul_by_x_2x v8, v9, v8, v9, v12, v13, v14 + mul_by_x_2x v10, v11, v10, v11, v12, v13, v14 + eor \in0\().16b, \in0\().16b, v8.16b + eor \in1\().16b, \in1\().16b, v9.16b + eor \in2\().16b, \in2\().16b, v10.16b + eor \in3\().16b, \in3\().16b, v11.16b + rev32 v8.8h, v8.8h + rev32 v9.8h, v9.8h + rev32 v10.8h, v10.8h + rev32 v11.8h, v11.8h + eor \in0\().16b, \in0\().16b, v8.16b + eor \in1\().16b, \in1\().16b, v9.16b + eor \in2\().16b, \in2\().16b, v10.16b + eor \in3\().16b, \in3\().16b, v11.16b + mix_columns_2x \in0, \in1 + mix_columns_2x \in2, \in3 + .endm + + .macro do_block_2x, enc, in0, in1 rounds, rk, rkp, i + ld1 {v15.16b}, [\rk] + add \rkp, \rk, #16 + mov \i, \rounds +1111: eor \in0\().16b, \in0\().16b, v15.16b /* ^round key */ + eor \in1\().16b, \in1\().16b, v15.16b /* ^round key */ + sub_bytes_2x \in0, \in1 + tbl \in0\().16b, {\in0\().16b}, v13.16b /* ShiftRows */ + tbl \in1\().16b, {\in1\().16b}, v13.16b /* ShiftRows */ + ld1 {v15.16b}, [\rkp], #16 + subs \i, \i, #1 + beq 2222f + .if \enc == 1 + mix_columns_2x \in0, \in1 + ldr q13, .LForward_ShiftRows + .else + inv_mix_cols_2x \in0, \in1 + ldr q13, .LReverse_ShiftRows + .endif + movi v12.16b, #0x40 + b 1111b +2222: eor \in0\().16b, \in0\().16b, v15.16b /* ^round key */ + eor \in1\().16b, \in1\().16b, v15.16b /* ^round key */ + .endm + + .macro do_block_4x, enc, in0, in1, in2, in3, rounds, rk, rkp, i + ld1 {v15.16b}, [\rk] + add \rkp, \rk, #16 + mov \i, \rounds +1111: eor \in0\().16b, \in0\().16b, v15.16b /* ^round key */ + eor \in1\().16b, \in1\().16b, v15.16b /* ^round key */ + eor \in2\().16b, \in2\().16b, v15.16b /* ^round key */ + eor \in3\().16b, \in3\().16b, v15.16b /* ^round key */ + sub_bytes_4x \in0, \in1, \in2, \in3 + tbl \in0\().16b, {\in0\().16b}, v13.16b /* ShiftRows */ + tbl \in1\().16b, {\in1\().16b}, v13.16b /* ShiftRows */ + tbl \in2\().16b, {\in2\().16b}, v13.16b /* ShiftRows */ + tbl \in3\().16b, {\in3\().16b}, v13.16b /* ShiftRows */ + ld1 {v15.16b}, [\rkp], #16 + subs \i, \i, #1 + beq 2222f + .if \enc == 1 + mix_columns_2x \in0, \in1 + mix_columns_2x \in2, \in3 + ldr q13, .LForward_ShiftRows + .else + inv_mix_cols_4x \in0, \in1, \in2, \in3 + ldr q13, .LReverse_ShiftRows + .endif + movi v12.16b, #0x40 + b 1111b +2222: eor \in0\().16b, \in0\().16b, v15.16b /* ^round key */ + eor \in1\().16b, \in1\().16b, v15.16b /* ^round key */ + eor \in2\().16b, \in2\().16b, v15.16b /* ^round key */ + eor \in3\().16b, \in3\().16b, v15.16b /* ^round key */ + .endm + + .macro encrypt_block2x, in0, in1, rounds, rk, rkp, i + do_block_2x 1, \in0, \in1, \rounds, \rk, \rkp, \i + .endm + + .macro decrypt_block2x, in0, in1, rounds, rk, rkp, i + do_block_2x 0, \in0, \in1, \rounds, \rk, \rkp, \i + .endm + + .macro encrypt_block4x, in0, in1, in2, in3, rounds, rk, rkp, i + do_block_4x 1, \in0, \in1, \in2, \in3, \rounds, \rk, \rkp, \i + .endm + + .macro decrypt_block4x, in0, in1, in2, in3, rounds, rk, rkp, i + do_block_4x 0, \in0, \in1, \in2, \in3, \rounds, \rk, \rkp, \i + .endm + +#include "aes-modes.S" + + .text + .align 4 +.LForward_ShiftRows: + .byte 0x0, 0x5, 0xa, 0xf, 0x4, 0x9, 0xe, 0x3 + .byte 0x8, 0xd, 0x2, 0x7, 0xc, 0x1, 0x6, 0xb + +.LReverse_ShiftRows: + .byte 0x0, 0xd, 0xa, 0x7, 0x4, 0x1, 0xe, 0xb + .byte 0x8, 0x5, 0x2, 0xf, 0xc, 0x9, 0x6, 0x3 + +.LForward_Sbox: + .byte 0x63, 0x7c, 0x77, 0x7b, 0xf2, 0x6b, 0x6f, 0xc5 + .byte 0x30, 0x01, 0x67, 0x2b, 0xfe, 0xd7, 0xab, 0x76 + .byte 0xca, 0x82, 0xc9, 0x7d, 0xfa, 0x59, 0x47, 0xf0 + .byte 0xad, 0xd4, 0xa2, 0xaf, 0x9c, 0xa4, 0x72, 0xc0 + .byte 0xb7, 0xfd, 0x93, 0x26, 0x36, 0x3f, 0xf7, 0xcc + .byte 0x34, 0xa5, 0xe5, 0xf1, 0x71, 0xd8, 0x31, 0x15 + .byte 0x04, 0xc7, 0x23, 0xc3, 0x18, 0x96, 0x05, 0x9a + .byte 0x07, 0x12, 0x80, 0xe2, 0xeb, 0x27, 0xb2, 0x75 + .byte 0x09, 0x83, 0x2c, 0x1a, 0x1b, 0x6e, 0x5a, 0xa0 + .byte 0x52, 0x3b, 0xd6, 0xb3, 0x29, 0xe3, 0x2f, 0x84 + .byte 0x53, 0xd1, 0x00, 0xed, 0x20, 0xfc, 0xb1, 0x5b + .byte 0x6a, 0xcb, 0xbe, 0x39, 0x4a, 0x4c, 0x58, 0xcf + .byte 0xd0, 0xef, 0xaa, 0xfb, 0x43, 0x4d, 0x33, 0x85 + .byte 0x45, 0xf9, 0x02, 0x7f, 0x50, 0x3c, 0x9f, 0xa8 + .byte 0x51, 0xa3, 0x40, 0x8f, 0x92, 0x9d, 0x38, 0xf5 + .byte 0xbc, 0xb6, 0xda, 0x21, 0x10, 0xff, 0xf3, 0xd2 + .byte 0xcd, 0x0c, 0x13, 0xec, 0x5f, 0x97, 0x44, 0x17 + .byte 0xc4, 0xa7, 0x7e, 0x3d, 0x64, 0x5d, 0x19, 0x73 + .byte 0x60, 0x81, 0x4f, 0xdc, 0x22, 0x2a, 0x90, 0x88 + .byte 0x46, 0xee, 0xb8, 0x14, 0xde, 0x5e, 0x0b, 0xdb + .byte 0xe0, 0x32, 0x3a, 0x0a, 0x49, 0x06, 0x24, 0x5c + .byte 0xc2, 0xd3, 0xac, 0x62, 0x91, 0x95, 0xe4, 0x79 + .byte 0xe7, 0xc8, 0x37, 0x6d, 0x8d, 0xd5, 0x4e, 0xa9 + .byte 0x6c, 0x56, 0xf4, 0xea, 0x65, 0x7a, 0xae, 0x08 + .byte 0xba, 0x78, 0x25, 0x2e, 0x1c, 0xa6, 0xb4, 0xc6 + .byte 0xe8, 0xdd, 0x74, 0x1f, 0x4b, 0xbd, 0x8b, 0x8a + .byte 0x70, 0x3e, 0xb5, 0x66, 0x48, 0x03, 0xf6, 0x0e + .byte 0x61, 0x35, 0x57, 0xb9, 0x86, 0xc1, 0x1d, 0x9e + .byte 0xe1, 0xf8, 0x98, 0x11, 0x69, 0xd9, 0x8e, 0x94 + .byte 0x9b, 0x1e, 0x87, 0xe9, 0xce, 0x55, 0x28, 0xdf + .byte 0x8c, 0xa1, 0x89, 0x0d, 0xbf, 0xe6, 0x42, 0x68 + .byte 0x41, 0x99, 0x2d, 0x0f, 0xb0, 0x54, 0xbb, 0x16 + +.LReverse_Sbox: + .byte 0x52, 0x09, 0x6a, 0xd5, 0x30, 0x36, 0xa5, 0x38 + .byte 0xbf, 0x40, 0xa3, 0x9e, 0x81, 0xf3, 0xd7, 0xfb + .byte 0x7c, 0xe3, 0x39, 0x82, 0x9b, 0x2f, 0xff, 0x87 + .byte 0x34, 0x8e, 0x43, 0x44, 0xc4, 0xde, 0xe9, 0xcb + .byte 0x54, 0x7b, 0x94, 0x32, 0xa6, 0xc2, 0x23, 0x3d + .byte 0xee, 0x4c, 0x95, 0x0b, 0x42, 0xfa, 0xc3, 0x4e + .byte 0x08, 0x2e, 0xa1, 0x66, 0x28, 0xd9, 0x24, 0xb2 + .byte 0x76, 0x5b, 0xa2, 0x49, 0x6d, 0x8b, 0xd1, 0x25 + .byte 0x72, 0xf8, 0xf6, 0x64, 0x86, 0x68, 0x98, 0x16 + .byte 0xd4, 0xa4, 0x5c, 0xcc, 0x5d, 0x65, 0xb6, 0x92 + .byte 0x6c, 0x70, 0x48, 0x50, 0xfd, 0xed, 0xb9, 0xda + .byte 0x5e, 0x15, 0x46, 0x57, 0xa7, 0x8d, 0x9d, 0x84 + .byte 0x90, 0xd8, 0xab, 0x00, 0x8c, 0xbc, 0xd3, 0x0a + .byte 0xf7, 0xe4, 0x58, 0x05, 0xb8, 0xb3, 0x45, 0x06 + .byte 0xd0, 0x2c, 0x1e, 0x8f, 0xca, 0x3f, 0x0f, 0x02 + .byte 0xc1, 0xaf, 0xbd, 0x03, 0x01, 0x13, 0x8a, 0x6b + .byte 0x3a, 0x91, 0x11, 0x41, 0x4f, 0x67, 0xdc, 0xea + .byte 0x97, 0xf2, 0xcf, 0xce, 0xf0, 0xb4, 0xe6, 0x73 + .byte 0x96, 0xac, 0x74, 0x22, 0xe7, 0xad, 0x35, 0x85 + .byte 0xe2, 0xf9, 0x37, 0xe8, 0x1c, 0x75, 0xdf, 0x6e + .byte 0x47, 0xf1, 0x1a, 0x71, 0x1d, 0x29, 0xc5, 0x89 + .byte 0x6f, 0xb7, 0x62, 0x0e, 0xaa, 0x18, 0xbe, 0x1b + .byte 0xfc, 0x56, 0x3e, 0x4b, 0xc6, 0xd2, 0x79, 0x20 + .byte 0x9a, 0xdb, 0xc0, 0xfe, 0x78, 0xcd, 0x5a, 0xf4 + .byte 0x1f, 0xdd, 0xa8, 0x33, 0x88, 0x07, 0xc7, 0x31 + .byte 0xb1, 0x12, 0x10, 0x59, 0x27, 0x80, 0xec, 0x5f + .byte 0x60, 0x51, 0x7f, 0xa9, 0x19, 0xb5, 0x4a, 0x0d + .byte 0x2d, 0xe5, 0x7a, 0x9f, 0x93, 0xc9, 0x9c, 0xef + .byte 0xa0, 0xe0, 0x3b, 0x4d, 0xae, 0x2a, 0xf5, 0xb0 + .byte 0xc8, 0xeb, 0xbb, 0x3c, 0x83, 0x53, 0x99, 0x61 + .byte 0x17, 0x2b, 0x04, 0x7e, 0xba, 0x77, 0xd6, 0x26 + .byte 0xe1, 0x69, 0x14, 0x63, 0x55, 0x21, 0x0c, 0x7d -- cgit v1.2.3 From 5a0fdfada3a2aa50d7b947a2e958bf00cbe0d830 Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Fri, 16 May 2014 16:44:32 +0100 Subject: Revert "arm64: Introduce execute-only page access permissions" This reverts commit bc07c2c6e9ed125d362af0214b6313dca180cb08. While the aim is increased security for --x memory maps, it does not protect against kernel level reads. Until SECCOMP is implemented for arm64, revert this patch to avoid giving a false idea of execute-only mappings. Signed-off-by: Catalin Marinas --- arch/arm64/include/asm/pgtable.h | 11 +++++------ arch/arm64/mm/fault.c | 5 +++-- 2 files changed, 8 insertions(+), 8 deletions(-) diff --git a/arch/arm64/include/asm/pgtable.h b/arch/arm64/include/asm/pgtable.h index e4c60d6e18b8..aa150ed99f22 100644 --- a/arch/arm64/include/asm/pgtable.h +++ b/arch/arm64/include/asm/pgtable.h @@ -86,13 +86,12 @@ extern void __pgd_error(const char *file, int line, unsigned long val); #define PAGE_COPY_EXEC __pgprot(_PAGE_DEFAULT | PTE_USER | PTE_NG | PTE_PXN) #define PAGE_READONLY __pgprot(_PAGE_DEFAULT | PTE_USER | PTE_NG | PTE_PXN | PTE_UXN) #define PAGE_READONLY_EXEC __pgprot(_PAGE_DEFAULT | PTE_USER | PTE_NG | PTE_PXN) -#define PAGE_EXECONLY __pgprot(_PAGE_DEFAULT | PTE_NG | PTE_PXN) #define __P000 PAGE_NONE #define __P001 PAGE_READONLY #define __P010 PAGE_COPY #define __P011 PAGE_COPY -#define __P100 PAGE_EXECONLY +#define __P100 PAGE_READONLY_EXEC #define __P101 PAGE_READONLY_EXEC #define __P110 PAGE_COPY_EXEC #define __P111 PAGE_COPY_EXEC @@ -101,7 +100,7 @@ extern void __pgd_error(const char *file, int line, unsigned long val); #define __S001 PAGE_READONLY #define __S010 PAGE_SHARED #define __S011 PAGE_SHARED -#define __S100 PAGE_EXECONLY +#define __S100 PAGE_READONLY_EXEC #define __S101 PAGE_READONLY_EXEC #define __S110 PAGE_SHARED_EXEC #define __S111 PAGE_SHARED_EXEC @@ -137,8 +136,8 @@ extern struct page *empty_zero_page; #define pte_write(pte) (!!(pte_val(pte) & PTE_WRITE)) #define pte_exec(pte) (!(pte_val(pte) & PTE_UXN)) -#define pte_valid_ng(pte) \ - ((pte_val(pte) & (PTE_VALID | PTE_NG)) == (PTE_VALID | PTE_NG)) +#define pte_valid_user(pte) \ + ((pte_val(pte) & (PTE_VALID | PTE_USER)) == (PTE_VALID | PTE_USER)) static inline pte_t pte_wrprotect(pte_t pte) { @@ -192,7 +191,7 @@ extern void __sync_icache_dcache(pte_t pteval, unsigned long addr); static inline void set_pte_at(struct mm_struct *mm, unsigned long addr, pte_t *ptep, pte_t pte) { - if (pte_valid_ng(pte)) { + if (pte_valid_user(pte)) { if (!pte_special(pte) && pte_exec(pte)) __sync_icache_dcache(pte, addr); if (pte_dirty(pte) && pte_write(pte)) diff --git a/arch/arm64/mm/fault.c b/arch/arm64/mm/fault.c index 89c6763d5e7e..bcc965e2cce1 100644 --- a/arch/arm64/mm/fault.c +++ b/arch/arm64/mm/fault.c @@ -173,7 +173,8 @@ static int __do_page_fault(struct mm_struct *mm, unsigned long addr, good_area: /* * Check that the permissions on the VMA allow for the fault which - * occurred. + * occurred. If we encountered a write or exec fault, we must have + * appropriate permissions, otherwise we allow any permission. */ if (!(vma->vm_flags & vm_flags)) { fault = VM_FAULT_BADACCESS; @@ -195,7 +196,7 @@ static int __kprobes do_page_fault(unsigned long addr, unsigned int esr, struct task_struct *tsk; struct mm_struct *mm; int fault, sig, code; - unsigned long vm_flags = VM_READ | VM_WRITE; + unsigned long vm_flags = VM_READ | VM_WRITE | VM_EXEC; unsigned int mm_flags = FAULT_FLAG_ALLOW_RETRY | FAULT_FLAG_KILLABLE; tsk = current; -- cgit v1.2.3 From 5dd349bab5c0126824b60810c80689980a041296 Mon Sep 17 00:00:00 2001 From: Zi Shen Lim Date: Fri, 2 May 2014 21:38:27 +0100 Subject: arm64: sched: Remove unused mc_capable() and smt_capable() Remove unused and deprecated mc_capable() and smt_capable(). Both were added recently by f6e763b93a6c ("arm64: topology: Implement basic CPU topology support"). Uses of both were removed by 8e7fbcbc22c1 ("sched: Remove stale power aware scheduling remnants and dysfunctional knobs"). Signed-off-by: Zi Shen Lim Signed-off-by: Mark Brown Signed-off-by: Catalin Marinas --- arch/arm64/include/asm/topology.h | 3 --- 1 file changed, 3 deletions(-) diff --git a/arch/arm64/include/asm/topology.h b/arch/arm64/include/asm/topology.h index 0172e6d76bf3..7ebcd31ce51c 100644 --- a/arch/arm64/include/asm/topology.h +++ b/arch/arm64/include/asm/topology.h @@ -20,9 +20,6 @@ extern struct cpu_topology cpu_topology[NR_CPUS]; #define topology_core_cpumask(cpu) (&cpu_topology[cpu].core_sibling) #define topology_thread_cpumask(cpu) (&cpu_topology[cpu].thread_sibling) -#define mc_capable() (cpu_topology[0].cluster_id != -1) -#define smt_capable() (cpu_topology[0].thread_id != -1) - void init_cpu_topology(void); void store_cpu_topology(unsigned int cpuid); const struct cpumask *cpu_coregroup_mask(int cpu); -- cgit v1.2.3 From c31bf0488d67737668b7401fac4b7ed550eaad76 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Fri, 2 May 2014 21:38:28 +0100 Subject: arm64: topology: Initialise default topology state immediately As a legacy of the way 32 bit ARM did things the topology code uses a null topology map by default and then overwrites it by mapping cores with no information to a cluster by themselves later. In order to make it simpler to reset things as part of recovering from parse failures in firmware information directly set this configuration on init. A core will always be its own sibling so there should be no risk of confusion with firmware provided information. Signed-off-by: Mark Brown Reviewed-by: Lorenzo Pieralisi Signed-off-by: Catalin Marinas --- arch/arm64/kernel/topology.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/arm64/kernel/topology.c b/arch/arm64/kernel/topology.c index 3e06b0be4ec8..ff662b23af5f 100644 --- a/arch/arm64/kernel/topology.c +++ b/arch/arm64/kernel/topology.c @@ -43,9 +43,6 @@ static void update_siblings_masks(unsigned int cpuid) * reset it to default behaviour */ pr_debug("CPU%u: No topology information configured\n", cpuid); - cpuid_topo->core_id = 0; - cpumask_set_cpu(cpuid, &cpuid_topo->core_sibling); - cpumask_set_cpu(cpuid, &cpuid_topo->thread_sibling); return; } @@ -87,9 +84,12 @@ void __init init_cpu_topology(void) struct cpu_topology *cpu_topo = &cpu_topology[cpu]; cpu_topo->thread_id = -1; - cpu_topo->core_id = -1; + cpu_topo->core_id = 0; cpu_topo->cluster_id = -1; + cpumask_clear(&cpu_topo->core_sibling); + cpumask_set_cpu(cpu, &cpu_topo->core_sibling); cpumask_clear(&cpu_topo->thread_sibling); + cpumask_set_cpu(cpu, &cpu_topo->thread_sibling); } } -- cgit v1.2.3 From ebdc94470d23d73dcab3748ae7eefa9ca669cdbe Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Fri, 2 May 2014 21:38:29 +0100 Subject: arm64: topology: Add support for topology DT bindings Add support for parsing the explicit topology bindings to discover the topology of the system. Since it is not currently clear how to map multi-level clusters for the scheduler all leaf clusters are presented to the scheduler at the same level. This should be enough to provide good support for current systems. Signed-off-by: Mark Brown Reviewed-by: Lorenzo Pieralisi Signed-off-by: Catalin Marinas --- arch/arm64/kernel/topology.c | 204 +++++++++++++++++++++++++++++++++++++++++-- 1 file changed, 196 insertions(+), 8 deletions(-) diff --git a/arch/arm64/kernel/topology.c b/arch/arm64/kernel/topology.c index ff662b23af5f..43514f905916 100644 --- a/arch/arm64/kernel/topology.c +++ b/arch/arm64/kernel/topology.c @@ -17,10 +17,192 @@ #include #include #include +#include #include #include +static int __init get_cpu_for_node(struct device_node *node) +{ + struct device_node *cpu_node; + int cpu; + + cpu_node = of_parse_phandle(node, "cpu", 0); + if (!cpu_node) + return -1; + + for_each_possible_cpu(cpu) { + if (of_get_cpu_node(cpu, NULL) == cpu_node) { + of_node_put(cpu_node); + return cpu; + } + } + + pr_crit("Unable to find CPU node for %s\n", cpu_node->full_name); + + of_node_put(cpu_node); + return -1; +} + +static int __init parse_core(struct device_node *core, int cluster_id, + int core_id) +{ + char name[10]; + bool leaf = true; + int i = 0; + int cpu; + struct device_node *t; + + do { + snprintf(name, sizeof(name), "thread%d", i); + t = of_get_child_by_name(core, name); + if (t) { + leaf = false; + cpu = get_cpu_for_node(t); + if (cpu >= 0) { + cpu_topology[cpu].cluster_id = cluster_id; + cpu_topology[cpu].core_id = core_id; + cpu_topology[cpu].thread_id = i; + } else { + pr_err("%s: Can't get CPU for thread\n", + t->full_name); + of_node_put(t); + return -EINVAL; + } + of_node_put(t); + } + i++; + } while (t); + + cpu = get_cpu_for_node(core); + if (cpu >= 0) { + if (!leaf) { + pr_err("%s: Core has both threads and CPU\n", + core->full_name); + return -EINVAL; + } + + cpu_topology[cpu].cluster_id = cluster_id; + cpu_topology[cpu].core_id = core_id; + } else if (leaf) { + pr_err("%s: Can't get CPU for leaf core\n", core->full_name); + return -EINVAL; + } + + return 0; +} + +static int __init parse_cluster(struct device_node *cluster, int depth) +{ + char name[10]; + bool leaf = true; + bool has_cores = false; + struct device_node *c; + static int cluster_id __initdata; + int core_id = 0; + int i, ret; + + /* + * First check for child clusters; we currently ignore any + * information about the nesting of clusters and present the + * scheduler with a flat list of them. + */ + i = 0; + do { + snprintf(name, sizeof(name), "cluster%d", i); + c = of_get_child_by_name(cluster, name); + if (c) { + leaf = false; + ret = parse_cluster(c, depth + 1); + of_node_put(c); + if (ret != 0) + return ret; + } + i++; + } while (c); + + /* Now check for cores */ + i = 0; + do { + snprintf(name, sizeof(name), "core%d", i); + c = of_get_child_by_name(cluster, name); + if (c) { + has_cores = true; + + if (depth == 0) { + pr_err("%s: cpu-map children should be clusters\n", + c->full_name); + of_node_put(c); + return -EINVAL; + } + + if (leaf) { + ret = parse_core(c, cluster_id, core_id++); + } else { + pr_err("%s: Non-leaf cluster with core %s\n", + cluster->full_name, name); + ret = -EINVAL; + } + + of_node_put(c); + if (ret != 0) + return ret; + } + i++; + } while (c); + + if (leaf && !has_cores) + pr_warn("%s: empty cluster\n", cluster->full_name); + + if (leaf) + cluster_id++; + + return 0; +} + +static int __init parse_dt_topology(void) +{ + struct device_node *cn, *map; + int ret = 0; + int cpu; + + cn = of_find_node_by_path("/cpus"); + if (!cn) { + pr_err("No CPU information found in DT\n"); + return 0; + } + + /* + * When topology is provided cpu-map is essentially a root + * cluster with restricted subnodes. + */ + map = of_get_child_by_name(cn, "cpu-map"); + if (!map) + goto out; + + ret = parse_cluster(map, 0); + if (ret != 0) + goto out_map; + + /* + * Check that all cores are in the topology; the SMP code will + * only mark cores described in the DT as possible. + */ + for_each_possible_cpu(cpu) { + if (cpu_topology[cpu].cluster_id == -1) { + pr_err("CPU%d: No topology information specified\n", + cpu); + ret = -EINVAL; + } + } + +out_map: + of_node_put(map); +out: + of_node_put(cn); + return ret; +} + /* * cpu topology table */ @@ -39,8 +221,7 @@ static void update_siblings_masks(unsigned int cpuid) if (cpuid_topo->cluster_id == -1) { /* - * DT does not contain topology information for this cpu - * reset it to default behaviour + * DT does not contain topology information for this cpu. */ pr_debug("CPU%u: No topology information configured\n", cpuid); return; @@ -71,15 +252,10 @@ void store_cpu_topology(unsigned int cpuid) update_siblings_masks(cpuid); } -/* - * init_cpu_topology is called at boot when only one cpu is running - * which prevent simultaneous write access to cpu_topology array - */ -void __init init_cpu_topology(void) +static void __init reset_cpu_topology(void) { unsigned int cpu; - /* init core mask and power*/ for_each_possible_cpu(cpu) { struct cpu_topology *cpu_topo = &cpu_topology[cpu]; @@ -93,3 +269,15 @@ void __init init_cpu_topology(void) cpumask_set_cpu(cpu, &cpu_topo->thread_sibling); } } + +void __init init_cpu_topology(void) +{ + reset_cpu_topology(); + + /* + * Discard anything that was parsed if we hit an error so we + * don't use partial information. + */ + if (parse_dt_topology()) + reset_cpu_topology(); +} -- cgit v1.2.3 From eb631bb5bf5b042202aaaee4a8dd8f863ba2a900 Mon Sep 17 00:00:00 2001 From: Larry Bassel Date: Mon, 12 May 2014 16:48:51 +0100 Subject: arm64: Support arch_irq_work_raise() via self IPIs Support for arch_irq_work_raise() was missing from arm64 (a prerequisite for FULL_NOHZ). This patch is based on the arm32 patch ARM 7872/1. commit bf18525fd793101df42a1344ecc48b49b62e48c9 Author: Stephen Boyd Date: Tue Oct 29 20:32:56 2013 +0100 ARM: 7872/1: Support arch_irq_work_raise() via self IPIs By default, IRQ work is run from the tick interrupt (see irq_work_run() in update_process_times()). When we're in full NOHZ mode, restarting the tick requires the use of IRQ work and if the only place we run IRQ work is in the tick interrupt we have an unbreakable cycle. Implement arch_irq_work_raise() via self IPIs to break this cycle and get the tick started again. Note that we implement this via IPIs which are only available on SMP builds. This shouldn't be a problem because full NOHZ is only supported on SMP builds anyway. Signed-off-by: Stephen Boyd Reviewed-by: Kevin Hilman Cc: Frederic Weisbecker Signed-off-by: Russell King Signed-off-by: Larry Bassel Reviewed-by: Kevin Hilman Signed-off-by: Catalin Marinas --- arch/arm64/include/asm/hardirq.h | 2 +- arch/arm64/kernel/smp.c | 19 +++++++++++++++++++ 2 files changed, 20 insertions(+), 1 deletion(-) diff --git a/arch/arm64/include/asm/hardirq.h b/arch/arm64/include/asm/hardirq.h index ae4801d77514..0be67821f9ce 100644 --- a/arch/arm64/include/asm/hardirq.h +++ b/arch/arm64/include/asm/hardirq.h @@ -20,7 +20,7 @@ #include #include -#define NR_IPI 5 +#define NR_IPI 6 typedef struct { unsigned int __softirq_pending; diff --git a/arch/arm64/kernel/smp.c b/arch/arm64/kernel/smp.c index f0a141dd5655..049aa8d5c553 100644 --- a/arch/arm64/kernel/smp.c +++ b/arch/arm64/kernel/smp.c @@ -35,6 +35,7 @@ #include #include #include +#include #include #include @@ -62,6 +63,7 @@ enum ipi_msg_type { IPI_CALL_FUNC_SINGLE, IPI_CPU_STOP, IPI_TIMER, + IPI_IRQ_WORK, }; /* @@ -455,6 +457,14 @@ void arch_send_call_function_single_ipi(int cpu) smp_cross_call(cpumask_of(cpu), IPI_CALL_FUNC_SINGLE); } +#ifdef CONFIG_IRQ_WORK +void arch_irq_work_raise(void) +{ + if (smp_cross_call) + smp_cross_call(cpumask_of(smp_processor_id()), IPI_IRQ_WORK); +} +#endif + static const char *ipi_types[NR_IPI] = { #define S(x,s) [x - IPI_RESCHEDULE] = s S(IPI_RESCHEDULE, "Rescheduling interrupts"), @@ -462,6 +472,7 @@ static const char *ipi_types[NR_IPI] = { S(IPI_CALL_FUNC_SINGLE, "Single function call interrupts"), S(IPI_CPU_STOP, "CPU stop interrupts"), S(IPI_TIMER, "Timer broadcast interrupts"), + S(IPI_IRQ_WORK, "IRQ work interrupts"), }; void show_ipi_list(struct seq_file *p, int prec) @@ -554,6 +565,14 @@ void handle_IPI(int ipinr, struct pt_regs *regs) break; #endif +#ifdef CONFIG_IRQ_WORK + case IPI_IRQ_WORK: + irq_enter(); + irq_work_run(); + irq_exit(); + break; +#endif + default: pr_crit("CPU%u: Unknown IPI message 0x%x\n", cpu, ipinr); break; -- cgit v1.2.3 From 90f51a09ef83703b6c2e0434e0384b61b59699d3 Mon Sep 17 00:00:00 2001 From: Arun KS Date: Wed, 7 May 2014 02:41:22 +0100 Subject: arm64: Fix machine_shutdown() definition This patch ports most of commit 19ab428f4b79 "ARM: 7759/1: decouple CPU offlining from reboot/shutdown" by Stephen Warren from arch/arm to arch/arm64. machine_shutdown() is a hook for kexec. Add a comment saying so, since it isn't obvious from the function name. Halt, power-off, and restart have different requirements re: stopping secondary CPUs than kexec has. The former simply require the secondary CPUs to be quiesced somehow, whereas kexec requires them to be completely non-operational, so that no matter where the kexec target images are written in RAM, they won't influence operation of the secondary CPUS,which could happen if the CPUs were still executing some kind of pin loop. To this end, modify machine_halt, power_off, and restart to call smp_send_stop() directly, rather than calling machine_shutdown(). In machine_shutdown(), replace the call to smp_send_stop() with a call to disable_nonboot_cpus(). This completely disables all but one CPU, thus satisfying the kexec requirements a couple paragraphs above. Signed-off-by: Arun KS Acked-by: Stephen Warren Signed-off-by: Catalin Marinas --- arch/arm64/kernel/process.c | 41 +++++++++++++++++++++++++++++++++++------ 1 file changed, 35 insertions(+), 6 deletions(-) diff --git a/arch/arm64/kernel/process.c b/arch/arm64/kernel/process.c index 9f2d6020b6c2..ed37c3694cb8 100644 --- a/arch/arm64/kernel/process.c +++ b/arch/arm64/kernel/process.c @@ -114,29 +114,58 @@ void arch_cpu_idle_dead(void) } #endif +/* + * Called by kexec, immediately prior to machine_kexec(). + * + * This must completely disable all secondary CPUs; simply causing those CPUs + * to execute e.g. a RAM-based pin loop is not sufficient. This allows the + * kexec'd kernel to use any and all RAM as it sees fit, without having to + * avoid any code or data used by any SW CPU pin loop. The CPU hotplug + * functionality embodied in disable_nonboot_cpus() to achieve this. + */ void machine_shutdown(void) { -#ifdef CONFIG_SMP - smp_send_stop(); -#endif + disable_nonboot_cpus(); } +/* + * Halting simply requires that the secondary CPUs stop performing any + * activity (executing tasks, handling interrupts). smp_send_stop() + * achieves this. + */ void machine_halt(void) { - machine_shutdown(); + smp_send_stop(); while (1); } +/* + * Power-off simply requires that the secondary CPUs stop performing any + * activity (executing tasks, handling interrupts). smp_send_stop() + * achieves this. When the system power is turned off, it will take all CPUs + * with it. + */ void machine_power_off(void) { - machine_shutdown(); + smp_send_stop(); if (pm_power_off) pm_power_off(); } +/* + * Restart requires that the secondary CPUs stop performing any activity + * while the primary CPU resets the system. Systems with a single CPU can + * use soft_restart() as their machine descriptor's .restart hook, since that + * will cause the only available CPU to reset. Systems with multiple CPUs must + * provide a HW restart implementation, to ensure that all CPUs reset at once. + * This is required so that any code running after reset on the primary CPU + * doesn't have to co-ordinate with other CPUs to ensure they aren't still + * executing pre-reset code, and using RAM that the primary CPU's code wishes + * to use. Implementing such co-ordination would be essentially impossible. + */ void machine_restart(char *cmd) { - machine_shutdown(); + smp_send_stop(); /* Disable interrupts first */ local_irq_disable(); -- cgit v1.2.3 From b9acc49ee9464f8f8232a790045d057eb158e869 Mon Sep 17 00:00:00 2001 From: Arun KS Date: Wed, 7 May 2014 02:41:23 +0100 Subject: arm64: Fix deadlock scenario with smp_send_stop() If one process calls sys_reboot and that process then stops other CPUs while those CPUs are within a spin_lock() region we can potentially encounter a deadlock scenario like below. CPU 0 CPU 1 ----- ----- spin_lock(my_lock) smp_send_stop() handle_IPI() disable_preemption/irqs while(1); spin_lock(my_lock) <--- Waits forever We shouldn't attempt to run any other tasks after we send a stop IPI to a CPU so disable preemption so that this task runs to completion. We use local_irq_disable() here for cross-arch consistency with x86. Based-on-work-by: Stephen Boyd Signed-off-by: Arun KS Signed-off-by: Catalin Marinas --- arch/arm64/kernel/process.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/arch/arm64/kernel/process.c b/arch/arm64/kernel/process.c index ed37c3694cb8..43b7c34f92cb 100644 --- a/arch/arm64/kernel/process.c +++ b/arch/arm64/kernel/process.c @@ -135,6 +135,7 @@ void machine_shutdown(void) */ void machine_halt(void) { + local_irq_disable(); smp_send_stop(); while (1); } @@ -147,6 +148,7 @@ void machine_halt(void) */ void machine_power_off(void) { + local_irq_disable(); smp_send_stop(); if (pm_power_off) pm_power_off(); @@ -165,10 +167,9 @@ void machine_power_off(void) */ void machine_restart(char *cmd) { - smp_send_stop(); - /* Disable interrupts first */ local_irq_disable(); + smp_send_stop(); /* Now call the architecture specific reboot code. */ if (arm_pm_restart) -- cgit v1.2.3 From eed542d6962ba33a689b4007a389f466e407bd74 Mon Sep 17 00:00:00 2001 From: AKASHI Takahiro Date: Tue, 20 May 2014 20:31:04 +0900 Subject: ftrace: Make CALLER_ADDRx macros more generic Most archs with HAVE_ARCH_CALLER_ADDR have pretty much the same definitions of CALLER_ADDRx(n). Instead of duplicating the code for all the archs, define a ftrace_return_address0() and ftrace_return_address(n) that can be overwritten by the archs if they need to do something different. Instead of 7 macros in every arch, we now only have at most 2 (and actually only 1 as ftrace_return_address0() should be the same for all archs). The CALLER_ADDRx(n) will now be defined in linux/ftrace.h and use the ftrace_return_address*(n?) macros. This removes a lot of the duplicate code. Link: http://lkml.kernel.org/p/1400585464-30333-1-git-send-email-takahiro.akashi@linaro.org Signed-off-by: AKASHI Takahiro Signed-off-by: Steven Rostedt --- arch/arm/include/asm/ftrace.h | 10 +--------- arch/blackfin/include/asm/ftrace.h | 11 +---------- arch/parisc/include/asm/ftrace.h | 10 +--------- arch/sh/include/asm/ftrace.h | 10 +--------- arch/xtensa/include/asm/ftrace.h | 14 ++++---------- include/linux/ftrace.h | 34 ++++++++++++++++++---------------- 6 files changed, 26 insertions(+), 63 deletions(-) diff --git a/arch/arm/include/asm/ftrace.h b/arch/arm/include/asm/ftrace.h index f89515adac60..eb577f4f5f70 100644 --- a/arch/arm/include/asm/ftrace.h +++ b/arch/arm/include/asm/ftrace.h @@ -52,15 +52,7 @@ extern inline void *return_address(unsigned int level) #endif -#define HAVE_ARCH_CALLER_ADDR - -#define CALLER_ADDR0 ((unsigned long)__builtin_return_address(0)) -#define CALLER_ADDR1 ((unsigned long)return_address(1)) -#define CALLER_ADDR2 ((unsigned long)return_address(2)) -#define CALLER_ADDR3 ((unsigned long)return_address(3)) -#define CALLER_ADDR4 ((unsigned long)return_address(4)) -#define CALLER_ADDR5 ((unsigned long)return_address(5)) -#define CALLER_ADDR6 ((unsigned long)return_address(6)) +#define ftrace_return_addr(n) return_address(n) #endif /* ifndef __ASSEMBLY__ */ diff --git a/arch/blackfin/include/asm/ftrace.h b/arch/blackfin/include/asm/ftrace.h index 8a029505d7b7..2f1c3c2657ad 100644 --- a/arch/blackfin/include/asm/ftrace.h +++ b/arch/blackfin/include/asm/ftrace.h @@ -66,16 +66,7 @@ extern inline void *return_address(unsigned int level) #endif /* CONFIG_FRAME_POINTER */ -#define HAVE_ARCH_CALLER_ADDR - -/* inline function or macro may lead to unexpected result */ -#define CALLER_ADDR0 ((unsigned long)__builtin_return_address(0)) -#define CALLER_ADDR1 ((unsigned long)return_address(1)) -#define CALLER_ADDR2 ((unsigned long)return_address(2)) -#define CALLER_ADDR3 ((unsigned long)return_address(3)) -#define CALLER_ADDR4 ((unsigned long)return_address(4)) -#define CALLER_ADDR5 ((unsigned long)return_address(5)) -#define CALLER_ADDR6 ((unsigned long)return_address(6)) +#define ftrace_return_address(n) return_address(n) #endif /* __ASSEMBLY__ */ diff --git a/arch/parisc/include/asm/ftrace.h b/arch/parisc/include/asm/ftrace.h index 72c0fafaa039..544ed8ef87eb 100644 --- a/arch/parisc/include/asm/ftrace.h +++ b/arch/parisc/include/asm/ftrace.h @@ -24,15 +24,7 @@ extern void return_to_handler(void); extern unsigned long return_address(unsigned int); -#define HAVE_ARCH_CALLER_ADDR - -#define CALLER_ADDR0 ((unsigned long)__builtin_return_address(0)) -#define CALLER_ADDR1 return_address(1) -#define CALLER_ADDR2 return_address(2) -#define CALLER_ADDR3 return_address(3) -#define CALLER_ADDR4 return_address(4) -#define CALLER_ADDR5 return_address(5) -#define CALLER_ADDR6 return_address(6) +#define ftrace_return_address(n) return_address(n) #endif /* __ASSEMBLY__ */ diff --git a/arch/sh/include/asm/ftrace.h b/arch/sh/include/asm/ftrace.h index 13e9966464c2..e79fb6ebaa42 100644 --- a/arch/sh/include/asm/ftrace.h +++ b/arch/sh/include/asm/ftrace.h @@ -40,15 +40,7 @@ static inline unsigned long ftrace_call_adjust(unsigned long addr) /* arch/sh/kernel/return_address.c */ extern void *return_address(unsigned int); -#define HAVE_ARCH_CALLER_ADDR - -#define CALLER_ADDR0 ((unsigned long)__builtin_return_address(0)) -#define CALLER_ADDR1 ((unsigned long)return_address(1)) -#define CALLER_ADDR2 ((unsigned long)return_address(2)) -#define CALLER_ADDR3 ((unsigned long)return_address(3)) -#define CALLER_ADDR4 ((unsigned long)return_address(4)) -#define CALLER_ADDR5 ((unsigned long)return_address(5)) -#define CALLER_ADDR6 ((unsigned long)return_address(6)) +#define ftrace_return_address(n) return_address(n) #endif /* __ASSEMBLY__ */ diff --git a/arch/xtensa/include/asm/ftrace.h b/arch/xtensa/include/asm/ftrace.h index 736b9d214d80..6c6d9a9f185f 100644 --- a/arch/xtensa/include/asm/ftrace.h +++ b/arch/xtensa/include/asm/ftrace.h @@ -12,24 +12,18 @@ #include -#define HAVE_ARCH_CALLER_ADDR #ifndef __ASSEMBLY__ -#define CALLER_ADDR0 ({ unsigned long a0, a1; \ +#define ftrace_return_address0 ({ unsigned long a0, a1; \ __asm__ __volatile__ ( \ "mov %0, a0\n" \ "mov %1, a1\n" \ : "=r"(a0), "=r"(a1)); \ MAKE_PC_FROM_RA(a0, a1); }) + #ifdef CONFIG_FRAME_POINTER extern unsigned long return_address(unsigned level); -#define CALLER_ADDR1 return_address(1) -#define CALLER_ADDR2 return_address(2) -#define CALLER_ADDR3 return_address(3) -#else /* CONFIG_FRAME_POINTER */ -#define CALLER_ADDR1 (0) -#define CALLER_ADDR2 (0) -#define CALLER_ADDR3 (0) -#endif /* CONFIG_FRAME_POINTER */ +#define ftrace_return_address(n) return_address(n) +#endif #endif /* __ASSEMBLY__ */ #ifdef CONFIG_FUNCTION_TRACER diff --git a/include/linux/ftrace.h b/include/linux/ftrace.h index ae9504b4b67d..2018751cad9e 100644 --- a/include/linux/ftrace.h +++ b/include/linux/ftrace.h @@ -616,25 +616,27 @@ static inline void __ftrace_enabled_restore(int enabled) #endif } -#ifndef HAVE_ARCH_CALLER_ADDR +/* All archs should have this, but we define it for consistency */ +#ifndef ftrace_return_address0 +# define ftrace_return_address0 __builtin_return_address(0) +#endif + +/* Archs may use other ways for ADDR1 and beyond */ +#ifndef ftrace_return_address # ifdef CONFIG_FRAME_POINTER -# define CALLER_ADDR0 ((unsigned long)__builtin_return_address(0)) -# define CALLER_ADDR1 ((unsigned long)__builtin_return_address(1)) -# define CALLER_ADDR2 ((unsigned long)__builtin_return_address(2)) -# define CALLER_ADDR3 ((unsigned long)__builtin_return_address(3)) -# define CALLER_ADDR4 ((unsigned long)__builtin_return_address(4)) -# define CALLER_ADDR5 ((unsigned long)__builtin_return_address(5)) -# define CALLER_ADDR6 ((unsigned long)__builtin_return_address(6)) +# define ftrace_return_address(n) __builtin_return_address(n) # else -# define CALLER_ADDR0 ((unsigned long)__builtin_return_address(0)) -# define CALLER_ADDR1 0UL -# define CALLER_ADDR2 0UL -# define CALLER_ADDR3 0UL -# define CALLER_ADDR4 0UL -# define CALLER_ADDR5 0UL -# define CALLER_ADDR6 0UL +# define ftrace_return_address(n) 0UL # endif -#endif /* ifndef HAVE_ARCH_CALLER_ADDR */ +#endif + +#define CALLER_ADDR0 ((unsigned long)ftrace_return_address0) +#define CALLER_ADDR1 ((unsigned long)ftrace_return_address(1)) +#define CALLER_ADDR2 ((unsigned long)ftrace_return_address(2)) +#define CALLER_ADDR3 ((unsigned long)ftrace_return_address(3)) +#define CALLER_ADDR4 ((unsigned long)ftrace_return_address(4)) +#define CALLER_ADDR5 ((unsigned long)ftrace_return_address(5)) +#define CALLER_ADDR6 ((unsigned long)ftrace_return_address(6)) #ifdef CONFIG_IRQSOFF_TRACER extern void time_hardirqs_on(unsigned long a0, unsigned long a1); -- cgit v1.2.3 From 74d2eb3cdb7bd6011229aa551bb36d45bcd327f4 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Thu, 22 May 2014 15:13:05 +0100 Subject: arm64: defconfig: enable a few more common/useful options in defconfig Whilst our defconfig is certainly usable, there are a few extra features we can enable to make it considerably more useful, particularly if people are using it for testing: - KVM - SWAP - Hugepages - ARMv8 crypto This patch enables these options in our defconfig. Note that the ordering has changed slightly, since this is the result of a new savedefconfig make target. Signed-off-by: Will Deacon Signed-off-by: Catalin Marinas --- arch/arm64/configs/defconfig | 36 +++++++++++++++++++++++------------- 1 file changed, 23 insertions(+), 13 deletions(-) diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig index 7959dd0ca5d5..157e1d8d9a47 100644 --- a/arch/arm64/configs/defconfig +++ b/arch/arm64/configs/defconfig @@ -1,11 +1,11 @@ # CONFIG_LOCALVERSION_AUTO is not set -# CONFIG_SWAP is not set CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y +CONFIG_AUDIT=y +CONFIG_NO_HZ_IDLE=y +CONFIG_HIGH_RES_TIMERS=y CONFIG_BSD_PROCESS_ACCT=y CONFIG_BSD_PROCESS_ACCT_V3=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 @@ -27,6 +27,7 @@ CONFIG_ARCH_VEXPRESS=y CONFIG_ARCH_XGENE=y CONFIG_SMP=y CONFIG_PREEMPT=y +CONFIG_TRANSPARENT_HUGEPAGE=y CONFIG_CMA=y CONFIG_CMDLINE="console=ttyAMA0" # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set @@ -44,7 +45,7 @@ CONFIG_IP_PNP_BOOTP=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_DEVTMPFS=y CONFIG_DMA_CMA=y -CONFIG_SCSI=y +CONFIG_VIRTIO_BLK=y # CONFIG_SCSI_PROC_FS is not set CONFIG_BLK_DEV_SD=y # CONFIG_SCSI_LOWLEVEL is not set @@ -56,20 +57,18 @@ CONFIG_SMC91X=y CONFIG_SMSC911X=y # CONFIG_WLAN is not set CONFIG_INPUT_EVDEV=y -# CONFIG_SERIO_I8042 is not set # CONFIG_SERIO_SERPORT is not set CONFIG_LEGACY_PTY_COUNT=16 CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_OF_PLATFORM=y CONFIG_SERIAL_AMBA_PL011=y CONFIG_SERIAL_AMBA_PL011_CONSOLE=y +CONFIG_SERIAL_OF_PLATFORM=y # CONFIG_HW_RANDOM is not set # CONFIG_HWMON is not set CONFIG_REGULATOR=y CONFIG_REGULATOR_FIXED_VOLTAGE=y CONFIG_FB=y -# CONFIG_VGA_CONSOLE is not set CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_LOGO=y # CONFIG_LOGO_LINUX_MONO is not set @@ -79,27 +78,38 @@ CONFIG_USB_ISP1760_HCD=y CONFIG_USB_STORAGE=y CONFIG_MMC=y CONFIG_MMC_ARMMMCI=y +CONFIG_VIRTIO_MMIO=y # CONFIG_IOMMU_SUPPORT is not set CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y -CONFIG_EXT4_FS=y # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set # CONFIG_EXT3_FS_XATTR is not set +CONFIG_EXT4_FS=y CONFIG_FUSE_FS=y CONFIG_CUSE=y CONFIG_VFAT_FS=y CONFIG_TMPFS=y +CONFIG_HUGETLBFS=y # CONFIG_MISC_FILESYSTEMS is not set CONFIG_NFS_FS=y CONFIG_ROOT_NFS=y CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_ISO8859_1=y -CONFIG_MAGIC_SYSRQ=y +CONFIG_VIRTUALIZATION=y +CONFIG_KVM=y +CONFIG_DEBUG_INFO=y CONFIG_DEBUG_FS=y +CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_KERNEL=y +CONFIG_LOCKUP_DETECTOR=y # CONFIG_SCHED_DEBUG is not set -CONFIG_DEBUG_INFO=y # CONFIG_FTRACE is not set -CONFIG_ATOMIC64_SELFTEST=y -CONFIG_VIRTIO_MMIO=y -CONFIG_VIRTIO_BLK=y +CONFIG_CRYPTO_ANSI_CPRNG=y +CONFIG_ARM64_CRYPTO=y +CONFIG_CRYPTO_SHA1_ARM64_CE=y +CONFIG_CRYPTO_SHA2_ARM64_CE=y +CONFIG_CRYPTO_GHASH_ARM64_CE=y +CONFIG_CRYPTO_AES_ARM64_CE=y +CONFIG_CRYPTO_AES_ARM64_CE_CCM=y +CONFIG_CRYPTO_AES_ARM64_CE_BLK=y +CONFIG_CRYPTO_AES_ARM64_NEON_BLK=y -- cgit v1.2.3 From 808dbac6b51f3441eb5a07724c0b0d1257046d51 Mon Sep 17 00:00:00 2001 From: "zhichang.yuan" Date: Mon, 28 Apr 2014 06:11:29 +0100 Subject: arm64: lib: Implement optimized memcpy routine This patch, based on Linaro's Cortex Strings library, improves the performance of the assembly optimized memcpy() function. Signed-off-by: Zhichang Yuan Signed-off-by: Deepak Saxena Signed-off-by: Catalin Marinas --- arch/arm64/lib/memcpy.S | 192 ++++++++++++++++++++++++++++++++++++++++++------ 1 file changed, 170 insertions(+), 22 deletions(-) diff --git a/arch/arm64/lib/memcpy.S b/arch/arm64/lib/memcpy.S index 27b5003609b6..8a9a96d3ddae 100644 --- a/arch/arm64/lib/memcpy.S +++ b/arch/arm64/lib/memcpy.S @@ -1,5 +1,13 @@ /* * Copyright (C) 2013 ARM Ltd. + * Copyright (C) 2013 Linaro. + * + * This code is based on glibc cortex strings work originally authored by Linaro + * and re-licensed under GPLv2 for the Linux kernel. The original code can + * be found @ + * + * http://bazaar.launchpad.net/~linaro-toolchain-dev/cortex-strings/trunk/ + * files/head:/src/aarch64/ * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -16,6 +24,7 @@ #include #include +#include /* * Copy a buffer from src to dest (alignment handled by the hardware) @@ -27,27 +36,166 @@ * Returns: * x0 - dest */ +dstin .req x0 +src .req x1 +count .req x2 +tmp1 .req x3 +tmp1w .req w3 +tmp2 .req x4 +tmp2w .req w4 +tmp3 .req x5 +tmp3w .req w5 +dst .req x6 + +A_l .req x7 +A_h .req x8 +B_l .req x9 +B_h .req x10 +C_l .req x11 +C_h .req x12 +D_l .req x13 +D_h .req x14 + ENTRY(memcpy) - mov x4, x0 - subs x2, x2, #8 - b.mi 2f -1: ldr x3, [x1], #8 - subs x2, x2, #8 - str x3, [x4], #8 - b.pl 1b -2: adds x2, x2, #4 - b.mi 3f - ldr w3, [x1], #4 - sub x2, x2, #4 - str w3, [x4], #4 -3: adds x2, x2, #2 - b.mi 4f - ldrh w3, [x1], #2 - sub x2, x2, #2 - strh w3, [x4], #2 -4: adds x2, x2, #1 - b.mi 5f - ldrb w3, [x1] - strb w3, [x4] -5: ret + mov dst, dstin + cmp count, #16 + /*When memory length is less than 16, the accessed are not aligned.*/ + b.lo .Ltiny15 + + neg tmp2, src + ands tmp2, tmp2, #15/* Bytes to reach alignment. */ + b.eq .LSrcAligned + sub count, count, tmp2 + /* + * Copy the leading memory data from src to dst in an increasing + * address order.By this way,the risk of overwritting the source + * memory data is eliminated when the distance between src and + * dst is less than 16. The memory accesses here are alignment. + */ + tbz tmp2, #0, 1f + ldrb tmp1w, [src], #1 + strb tmp1w, [dst], #1 +1: + tbz tmp2, #1, 2f + ldrh tmp1w, [src], #2 + strh tmp1w, [dst], #2 +2: + tbz tmp2, #2, 3f + ldr tmp1w, [src], #4 + str tmp1w, [dst], #4 +3: + tbz tmp2, #3, .LSrcAligned + ldr tmp1, [src],#8 + str tmp1, [dst],#8 + +.LSrcAligned: + cmp count, #64 + b.ge .Lcpy_over64 + /* + * Deal with small copies quickly by dropping straight into the + * exit block. + */ +.Ltail63: + /* + * Copy up to 48 bytes of data. At this point we only need the + * bottom 6 bits of count to be accurate. + */ + ands tmp1, count, #0x30 + b.eq .Ltiny15 + cmp tmp1w, #0x20 + b.eq 1f + b.lt 2f + ldp A_l, A_h, [src], #16 + stp A_l, A_h, [dst], #16 +1: + ldp A_l, A_h, [src], #16 + stp A_l, A_h, [dst], #16 +2: + ldp A_l, A_h, [src], #16 + stp A_l, A_h, [dst], #16 +.Ltiny15: + /* + * Prefer to break one ldp/stp into several load/store to access + * memory in an increasing address order,rather than to load/store 16 + * bytes from (src-16) to (dst-16) and to backward the src to aligned + * address,which way is used in original cortex memcpy. If keeping + * the original memcpy process here, memmove need to satisfy the + * precondition that src address is at least 16 bytes bigger than dst + * address,otherwise some source data will be overwritten when memove + * call memcpy directly. To make memmove simpler and decouple the + * memcpy's dependency on memmove, withdrew the original process. + */ + tbz count, #3, 1f + ldr tmp1, [src], #8 + str tmp1, [dst], #8 +1: + tbz count, #2, 2f + ldr tmp1w, [src], #4 + str tmp1w, [dst], #4 +2: + tbz count, #1, 3f + ldrh tmp1w, [src], #2 + strh tmp1w, [dst], #2 +3: + tbz count, #0, .Lexitfunc + ldrb tmp1w, [src] + strb tmp1w, [dst] + +.Lexitfunc: + ret + +.Lcpy_over64: + subs count, count, #128 + b.ge .Lcpy_body_large + /* + * Less than 128 bytes to copy, so handle 64 here and then jump + * to the tail. + */ + ldp A_l, A_h, [src],#16 + stp A_l, A_h, [dst],#16 + ldp B_l, B_h, [src],#16 + ldp C_l, C_h, [src],#16 + stp B_l, B_h, [dst],#16 + stp C_l, C_h, [dst],#16 + ldp D_l, D_h, [src],#16 + stp D_l, D_h, [dst],#16 + + tst count, #0x3f + b.ne .Ltail63 + ret + + /* + * Critical loop. Start at a new cache line boundary. Assuming + * 64 bytes per line this ensures the entire loop is in one line. + */ + .p2align L1_CACHE_SHIFT +.Lcpy_body_large: + /* pre-get 64 bytes data. */ + ldp A_l, A_h, [src],#16 + ldp B_l, B_h, [src],#16 + ldp C_l, C_h, [src],#16 + ldp D_l, D_h, [src],#16 +1: + /* + * interlace the load of next 64 bytes data block with store of the last + * loaded 64 bytes data. + */ + stp A_l, A_h, [dst],#16 + ldp A_l, A_h, [src],#16 + stp B_l, B_h, [dst],#16 + ldp B_l, B_h, [src],#16 + stp C_l, C_h, [dst],#16 + ldp C_l, C_h, [src],#16 + stp D_l, D_h, [dst],#16 + ldp D_l, D_h, [src],#16 + subs count, count, #64 + b.ge 1b + stp A_l, A_h, [dst],#16 + stp B_l, B_h, [dst],#16 + stp C_l, C_h, [dst],#16 + stp D_l, D_h, [dst],#16 + + tst count, #0x3f + b.ne .Ltail63 + ret ENDPROC(memcpy) -- cgit v1.2.3 From 280adc1951c0c9fc8f2d85571ff563a1c412b1cd Mon Sep 17 00:00:00 2001 From: "zhichang.yuan" Date: Mon, 28 Apr 2014 06:11:30 +0100 Subject: arm64: lib: Implement optimized memmove routine This patch, based on Linaro's Cortex Strings library, improves the performance of the assembly optimized memmove() function. Signed-off-by: Zhichang Yuan Signed-off-by: Deepak Saxena Signed-off-by: Catalin Marinas --- arch/arm64/lib/memmove.S | 190 ++++++++++++++++++++++++++++++++++++++++------- 1 file changed, 165 insertions(+), 25 deletions(-) diff --git a/arch/arm64/lib/memmove.S b/arch/arm64/lib/memmove.S index b79fdfa42d39..57b19ea2dad4 100644 --- a/arch/arm64/lib/memmove.S +++ b/arch/arm64/lib/memmove.S @@ -1,5 +1,13 @@ /* * Copyright (C) 2013 ARM Ltd. + * Copyright (C) 2013 Linaro. + * + * This code is based on glibc cortex strings work originally authored by Linaro + * and re-licensed under GPLv2 for the Linux kernel. The original code can + * be found @ + * + * http://bazaar.launchpad.net/~linaro-toolchain-dev/cortex-strings/trunk/ + * files/head:/src/aarch64/ * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -16,6 +24,7 @@ #include #include +#include /* * Move a buffer from src to test (alignment handled by the hardware). @@ -28,30 +37,161 @@ * Returns: * x0 - dest */ +dstin .req x0 +src .req x1 +count .req x2 +tmp1 .req x3 +tmp1w .req w3 +tmp2 .req x4 +tmp2w .req w4 +tmp3 .req x5 +tmp3w .req w5 +dst .req x6 + +A_l .req x7 +A_h .req x8 +B_l .req x9 +B_h .req x10 +C_l .req x11 +C_h .req x12 +D_l .req x13 +D_h .req x14 + ENTRY(memmove) - cmp x0, x1 - b.ls memcpy - add x4, x0, x2 - add x1, x1, x2 - subs x2, x2, #8 - b.mi 2f -1: ldr x3, [x1, #-8]! - subs x2, x2, #8 - str x3, [x4, #-8]! - b.pl 1b -2: adds x2, x2, #4 - b.mi 3f - ldr w3, [x1, #-4]! - sub x2, x2, #4 - str w3, [x4, #-4]! -3: adds x2, x2, #2 - b.mi 4f - ldrh w3, [x1, #-2]! - sub x2, x2, #2 - strh w3, [x4, #-2]! -4: adds x2, x2, #1 - b.mi 5f - ldrb w3, [x1, #-1] - strb w3, [x4, #-1] -5: ret + cmp dstin, src + b.lo memcpy + add tmp1, src, count + cmp dstin, tmp1 + b.hs memcpy /* No overlap. */ + + add dst, dstin, count + add src, src, count + cmp count, #16 + b.lo .Ltail15 /*probably non-alignment accesses.*/ + + ands tmp2, src, #15 /* Bytes to reach alignment. */ + b.eq .LSrcAligned + sub count, count, tmp2 + /* + * process the aligned offset length to make the src aligned firstly. + * those extra instructions' cost is acceptable. It also make the + * coming accesses are based on aligned address. + */ + tbz tmp2, #0, 1f + ldrb tmp1w, [src, #-1]! + strb tmp1w, [dst, #-1]! +1: + tbz tmp2, #1, 2f + ldrh tmp1w, [src, #-2]! + strh tmp1w, [dst, #-2]! +2: + tbz tmp2, #2, 3f + ldr tmp1w, [src, #-4]! + str tmp1w, [dst, #-4]! +3: + tbz tmp2, #3, .LSrcAligned + ldr tmp1, [src, #-8]! + str tmp1, [dst, #-8]! + +.LSrcAligned: + cmp count, #64 + b.ge .Lcpy_over64 + + /* + * Deal with small copies quickly by dropping straight into the + * exit block. + */ +.Ltail63: + /* + * Copy up to 48 bytes of data. At this point we only need the + * bottom 6 bits of count to be accurate. + */ + ands tmp1, count, #0x30 + b.eq .Ltail15 + cmp tmp1w, #0x20 + b.eq 1f + b.lt 2f + ldp A_l, A_h, [src, #-16]! + stp A_l, A_h, [dst, #-16]! +1: + ldp A_l, A_h, [src, #-16]! + stp A_l, A_h, [dst, #-16]! +2: + ldp A_l, A_h, [src, #-16]! + stp A_l, A_h, [dst, #-16]! + +.Ltail15: + tbz count, #3, 1f + ldr tmp1, [src, #-8]! + str tmp1, [dst, #-8]! +1: + tbz count, #2, 2f + ldr tmp1w, [src, #-4]! + str tmp1w, [dst, #-4]! +2: + tbz count, #1, 3f + ldrh tmp1w, [src, #-2]! + strh tmp1w, [dst, #-2]! +3: + tbz count, #0, .Lexitfunc + ldrb tmp1w, [src, #-1] + strb tmp1w, [dst, #-1] + +.Lexitfunc: + ret + +.Lcpy_over64: + subs count, count, #128 + b.ge .Lcpy_body_large + /* + * Less than 128 bytes to copy, so handle 64 bytes here and then jump + * to the tail. + */ + ldp A_l, A_h, [src, #-16] + stp A_l, A_h, [dst, #-16] + ldp B_l, B_h, [src, #-32] + ldp C_l, C_h, [src, #-48] + stp B_l, B_h, [dst, #-32] + stp C_l, C_h, [dst, #-48] + ldp D_l, D_h, [src, #-64]! + stp D_l, D_h, [dst, #-64]! + + tst count, #0x3f + b.ne .Ltail63 + ret + + /* + * Critical loop. Start at a new cache line boundary. Assuming + * 64 bytes per line this ensures the entire loop is in one line. + */ + .p2align L1_CACHE_SHIFT +.Lcpy_body_large: + /* pre-load 64 bytes data. */ + ldp A_l, A_h, [src, #-16] + ldp B_l, B_h, [src, #-32] + ldp C_l, C_h, [src, #-48] + ldp D_l, D_h, [src, #-64]! +1: + /* + * interlace the load of next 64 bytes data block with store of the last + * loaded 64 bytes data. + */ + stp A_l, A_h, [dst, #-16] + ldp A_l, A_h, [src, #-16] + stp B_l, B_h, [dst, #-32] + ldp B_l, B_h, [src, #-32] + stp C_l, C_h, [dst, #-48] + ldp C_l, C_h, [src, #-48] + stp D_l, D_h, [dst, #-64]! + ldp D_l, D_h, [src, #-64]! + subs count, count, #64 + b.ge 1b + stp A_l, A_h, [dst, #-16] + stp B_l, B_h, [dst, #-32] + stp C_l, C_h, [dst, #-48] + stp D_l, D_h, [dst, #-64]! + + tst count, #0x3f + b.ne .Ltail63 + ret ENDPROC(memmove) -- cgit v1.2.3 From b29a51fe0e0be63157d8661666be8bbfd8f0c5d7 Mon Sep 17 00:00:00 2001 From: "zhichang.yuan" Date: Mon, 28 Apr 2014 06:11:31 +0100 Subject: arm64: lib: Implement optimized memset routine This patch, based on Linaro's Cortex Strings library, improves the performance of the assembly optimized memset() function. Signed-off-by: Zhichang Yuan Signed-off-by: Deepak Saxena Signed-off-by: Catalin Marinas --- arch/arm64/lib/memset.S | 207 +++++++++++++++++++++++++++++++++++++++++++----- 1 file changed, 185 insertions(+), 22 deletions(-) diff --git a/arch/arm64/lib/memset.S b/arch/arm64/lib/memset.S index 87e4a68fbbbc..7c72dfd36b63 100644 --- a/arch/arm64/lib/memset.S +++ b/arch/arm64/lib/memset.S @@ -1,5 +1,13 @@ /* * Copyright (C) 2013 ARM Ltd. + * Copyright (C) 2013 Linaro. + * + * This code is based on glibc cortex strings work originally authored by Linaro + * and re-licensed under GPLv2 for the Linux kernel. The original code can + * be found @ + * + * http://bazaar.launchpad.net/~linaro-toolchain-dev/cortex-strings/trunk/ + * files/head:/src/aarch64/ * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -16,6 +24,7 @@ #include #include +#include /* * Fill in the buffer with character c (alignment handled by the hardware) @@ -27,27 +36,181 @@ * Returns: * x0 - buf */ + +dstin .req x0 +val .req w1 +count .req x2 +tmp1 .req x3 +tmp1w .req w3 +tmp2 .req x4 +tmp2w .req w4 +zva_len_x .req x5 +zva_len .req w5 +zva_bits_x .req x6 + +A_l .req x7 +A_lw .req w7 +dst .req x8 +tmp3w .req w9 +tmp3 .req x9 + ENTRY(memset) - mov x4, x0 - and w1, w1, #0xff - orr w1, w1, w1, lsl #8 - orr w1, w1, w1, lsl #16 - orr x1, x1, x1, lsl #32 - subs x2, x2, #8 - b.mi 2f -1: str x1, [x4], #8 - subs x2, x2, #8 - b.pl 1b -2: adds x2, x2, #4 - b.mi 3f - sub x2, x2, #4 - str w1, [x4], #4 -3: adds x2, x2, #2 - b.mi 4f - sub x2, x2, #2 - strh w1, [x4], #2 -4: adds x2, x2, #1 - b.mi 5f - strb w1, [x4] -5: ret + mov dst, dstin /* Preserve return value. */ + and A_lw, val, #255 + orr A_lw, A_lw, A_lw, lsl #8 + orr A_lw, A_lw, A_lw, lsl #16 + orr A_l, A_l, A_l, lsl #32 + + cmp count, #15 + b.hi .Lover16_proc + /*All store maybe are non-aligned..*/ + tbz count, #3, 1f + str A_l, [dst], #8 +1: + tbz count, #2, 2f + str A_lw, [dst], #4 +2: + tbz count, #1, 3f + strh A_lw, [dst], #2 +3: + tbz count, #0, 4f + strb A_lw, [dst] +4: + ret + +.Lover16_proc: + /*Whether the start address is aligned with 16.*/ + neg tmp2, dst + ands tmp2, tmp2, #15 + b.eq .Laligned +/* +* The count is not less than 16, we can use stp to store the start 16 bytes, +* then adjust the dst aligned with 16.This process will make the current +* memory address at alignment boundary. +*/ + stp A_l, A_l, [dst] /*non-aligned store..*/ + /*make the dst aligned..*/ + sub count, count, tmp2 + add dst, dst, tmp2 + +.Laligned: + cbz A_l, .Lzero_mem + +.Ltail_maybe_long: + cmp count, #64 + b.ge .Lnot_short +.Ltail63: + ands tmp1, count, #0x30 + b.eq 3f + cmp tmp1w, #0x20 + b.eq 1f + b.lt 2f + stp A_l, A_l, [dst], #16 +1: + stp A_l, A_l, [dst], #16 +2: + stp A_l, A_l, [dst], #16 +/* +* The last store length is less than 16,use stp to write last 16 bytes. +* It will lead some bytes written twice and the access is non-aligned. +*/ +3: + ands count, count, #15 + cbz count, 4f + add dst, dst, count + stp A_l, A_l, [dst, #-16] /* Repeat some/all of last store. */ +4: + ret + + /* + * Critical loop. Start at a new cache line boundary. Assuming + * 64 bytes per line, this ensures the entire loop is in one line. + */ + .p2align L1_CACHE_SHIFT +.Lnot_short: + sub dst, dst, #16/* Pre-bias. */ + sub count, count, #64 +1: + stp A_l, A_l, [dst, #16] + stp A_l, A_l, [dst, #32] + stp A_l, A_l, [dst, #48] + stp A_l, A_l, [dst, #64]! + subs count, count, #64 + b.ge 1b + tst count, #0x3f + add dst, dst, #16 + b.ne .Ltail63 +.Lexitfunc: + ret + + /* + * For zeroing memory, check to see if we can use the ZVA feature to + * zero entire 'cache' lines. + */ +.Lzero_mem: + cmp count, #63 + b.le .Ltail63 + /* + * For zeroing small amounts of memory, it's not worth setting up + * the line-clear code. + */ + cmp count, #128 + b.lt .Lnot_short /*count is at least 128 bytes*/ + + mrs tmp1, dczid_el0 + tbnz tmp1, #4, .Lnot_short + mov tmp3w, #4 + and zva_len, tmp1w, #15 /* Safety: other bits reserved. */ + lsl zva_len, tmp3w, zva_len + + ands tmp3w, zva_len, #63 + /* + * ensure the zva_len is not less than 64. + * It is not meaningful to use ZVA if the block size is less than 64. + */ + b.ne .Lnot_short +.Lzero_by_line: + /* + * Compute how far we need to go to become suitably aligned. We're + * already at quad-word alignment. + */ + cmp count, zva_len_x + b.lt .Lnot_short /* Not enough to reach alignment. */ + sub zva_bits_x, zva_len_x, #1 + neg tmp2, dst + ands tmp2, tmp2, zva_bits_x + b.eq 2f /* Already aligned. */ + /* Not aligned, check that there's enough to copy after alignment.*/ + sub tmp1, count, tmp2 + /* + * grantee the remain length to be ZVA is bigger than 64, + * avoid to make the 2f's process over mem range.*/ + cmp tmp1, #64 + ccmp tmp1, zva_len_x, #8, ge /* NZCV=0b1000 */ + b.lt .Lnot_short + /* + * We know that there's at least 64 bytes to zero and that it's safe + * to overrun by 64 bytes. + */ + mov count, tmp1 +1: + stp A_l, A_l, [dst] + stp A_l, A_l, [dst, #16] + stp A_l, A_l, [dst, #32] + subs tmp2, tmp2, #64 + stp A_l, A_l, [dst, #48] + add dst, dst, #64 + b.ge 1b + /* We've overrun a bit, so adjust dst downwards.*/ + add dst, dst, tmp2 +2: + sub count, count, zva_len_x +3: + dc zva, dst + add dst, dst, zva_len_x + subs count, count, zva_len_x + b.ge 3b + ands count, count, zva_bits_x + b.ne .Ltail_maybe_long + ret ENDPROC(memset) -- cgit v1.2.3 From d875c9b3724083cd2629cd8507e424cd3716cd28 Mon Sep 17 00:00:00 2001 From: "zhichang.yuan" Date: Mon, 28 Apr 2014 06:11:32 +0100 Subject: arm64: lib: Implement optimized memcmp routine This patch, based on Linaro's Cortex Strings library, adds an assembly optimized memcmp() function. Signed-off-by: Zhichang Yuan Signed-off-by: Deepak Saxena Signed-off-by: Catalin Marinas --- arch/arm64/include/asm/string.h | 3 + arch/arm64/kernel/arm64ksyms.c | 1 + arch/arm64/lib/Makefile | 2 +- arch/arm64/lib/memcmp.S | 258 ++++++++++++++++++++++++++++++++++++++++ 4 files changed, 263 insertions(+), 1 deletion(-) create mode 100644 arch/arm64/lib/memcmp.S diff --git a/arch/arm64/include/asm/string.h b/arch/arm64/include/asm/string.h index 3ee8b303d9a9..3a43305cda71 100644 --- a/arch/arm64/include/asm/string.h +++ b/arch/arm64/include/asm/string.h @@ -34,4 +34,7 @@ extern void *memchr(const void *, int, __kernel_size_t); #define __HAVE_ARCH_MEMSET extern void *memset(void *, int, __kernel_size_t); +#define __HAVE_ARCH_MEMCMP +extern int memcmp(const void *, const void *, size_t); + #endif diff --git a/arch/arm64/kernel/arm64ksyms.c b/arch/arm64/kernel/arm64ksyms.c index 338b568cd8ae..909c18e155ea 100644 --- a/arch/arm64/kernel/arm64ksyms.c +++ b/arch/arm64/kernel/arm64ksyms.c @@ -48,6 +48,7 @@ EXPORT_SYMBOL(memset); EXPORT_SYMBOL(memcpy); EXPORT_SYMBOL(memmove); EXPORT_SYMBOL(memchr); +EXPORT_SYMBOL(memcmp); /* atomic bitops */ EXPORT_SYMBOL(set_bit); diff --git a/arch/arm64/lib/Makefile b/arch/arm64/lib/Makefile index 328ce1a99daa..112c67f2b109 100644 --- a/arch/arm64/lib/Makefile +++ b/arch/arm64/lib/Makefile @@ -1,4 +1,4 @@ lib-y := bitops.o clear_user.o delay.o copy_from_user.o \ copy_to_user.o copy_in_user.o copy_page.o \ clear_page.o memchr.o memcpy.o memmove.o memset.o \ - strchr.o strrchr.o + memcmp.o strchr.o strrchr.o diff --git a/arch/arm64/lib/memcmp.S b/arch/arm64/lib/memcmp.S new file mode 100644 index 000000000000..6ea0776ba6de --- /dev/null +++ b/arch/arm64/lib/memcmp.S @@ -0,0 +1,258 @@ +/* + * Copyright (C) 2013 ARM Ltd. + * Copyright (C) 2013 Linaro. + * + * This code is based on glibc cortex strings work originally authored by Linaro + * and re-licensed under GPLv2 for the Linux kernel. The original code can + * be found @ + * + * http://bazaar.launchpad.net/~linaro-toolchain-dev/cortex-strings/trunk/ + * files/head:/src/aarch64/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include +#include + +/* +* compare memory areas(when two memory areas' offset are different, +* alignment handled by the hardware) +* +* Parameters: +* x0 - const memory area 1 pointer +* x1 - const memory area 2 pointer +* x2 - the maximal compare byte length +* Returns: +* x0 - a compare result, maybe less than, equal to, or greater than ZERO +*/ + +/* Parameters and result. */ +src1 .req x0 +src2 .req x1 +limit .req x2 +result .req x0 + +/* Internal variables. */ +data1 .req x3 +data1w .req w3 +data2 .req x4 +data2w .req w4 +has_nul .req x5 +diff .req x6 +endloop .req x7 +tmp1 .req x8 +tmp2 .req x9 +tmp3 .req x10 +pos .req x11 +limit_wd .req x12 +mask .req x13 + +ENTRY(memcmp) + cbz limit, .Lret0 + eor tmp1, src1, src2 + tst tmp1, #7 + b.ne .Lmisaligned8 + ands tmp1, src1, #7 + b.ne .Lmutual_align + sub limit_wd, limit, #1 /* limit != 0, so no underflow. */ + lsr limit_wd, limit_wd, #3 /* Convert to Dwords. */ + /* + * The input source addresses are at alignment boundary. + * Directly compare eight bytes each time. + */ +.Lloop_aligned: + ldr data1, [src1], #8 + ldr data2, [src2], #8 +.Lstart_realigned: + subs limit_wd, limit_wd, #1 + eor diff, data1, data2 /* Non-zero if differences found. */ + csinv endloop, diff, xzr, cs /* Last Dword or differences. */ + cbz endloop, .Lloop_aligned + + /* Not reached the limit, must have found a diff. */ + tbz limit_wd, #63, .Lnot_limit + + /* Limit % 8 == 0 => the diff is in the last 8 bytes. */ + ands limit, limit, #7 + b.eq .Lnot_limit + /* + * The remained bytes less than 8. It is needed to extract valid data + * from last eight bytes of the intended memory range. + */ + lsl limit, limit, #3 /* bytes-> bits. */ + mov mask, #~0 +CPU_BE( lsr mask, mask, limit ) +CPU_LE( lsl mask, mask, limit ) + bic data1, data1, mask + bic data2, data2, mask + + orr diff, diff, mask + b .Lnot_limit + +.Lmutual_align: + /* + * Sources are mutually aligned, but are not currently at an + * alignment boundary. Round down the addresses and then mask off + * the bytes that precede the start point. + */ + bic src1, src1, #7 + bic src2, src2, #7 + ldr data1, [src1], #8 + ldr data2, [src2], #8 + /* + * We can not add limit with alignment offset(tmp1) here. Since the + * addition probably make the limit overflown. + */ + sub limit_wd, limit, #1/*limit != 0, so no underflow.*/ + and tmp3, limit_wd, #7 + lsr limit_wd, limit_wd, #3 + add tmp3, tmp3, tmp1 + add limit_wd, limit_wd, tmp3, lsr #3 + add limit, limit, tmp1/* Adjust the limit for the extra. */ + + lsl tmp1, tmp1, #3/* Bytes beyond alignment -> bits.*/ + neg tmp1, tmp1/* Bits to alignment -64. */ + mov tmp2, #~0 + /*mask off the non-intended bytes before the start address.*/ +CPU_BE( lsl tmp2, tmp2, tmp1 )/*Big-endian.Early bytes are at MSB*/ + /* Little-endian. Early bytes are at LSB. */ +CPU_LE( lsr tmp2, tmp2, tmp1 ) + + orr data1, data1, tmp2 + orr data2, data2, tmp2 + b .Lstart_realigned + + /*src1 and src2 have different alignment offset.*/ +.Lmisaligned8: + cmp limit, #8 + b.lo .Ltiny8proc /*limit < 8: compare byte by byte*/ + + and tmp1, src1, #7 + neg tmp1, tmp1 + add tmp1, tmp1, #8/*valid length in the first 8 bytes of src1*/ + and tmp2, src2, #7 + neg tmp2, tmp2 + add tmp2, tmp2, #8/*valid length in the first 8 bytes of src2*/ + subs tmp3, tmp1, tmp2 + csel pos, tmp1, tmp2, hi /*Choose the maximum.*/ + + sub limit, limit, pos + /*compare the proceeding bytes in the first 8 byte segment.*/ +.Ltinycmp: + ldrb data1w, [src1], #1 + ldrb data2w, [src2], #1 + subs pos, pos, #1 + ccmp data1w, data2w, #0, ne /* NZCV = 0b0000. */ + b.eq .Ltinycmp + cbnz pos, 1f /*diff occurred before the last byte.*/ + cmp data1w, data2w + b.eq .Lstart_align +1: + sub result, data1, data2 + ret + +.Lstart_align: + lsr limit_wd, limit, #3 + cbz limit_wd, .Lremain8 + + ands xzr, src1, #7 + b.eq .Lrecal_offset + /*process more leading bytes to make src1 aligned...*/ + add src1, src1, tmp3 /*backwards src1 to alignment boundary*/ + add src2, src2, tmp3 + sub limit, limit, tmp3 + lsr limit_wd, limit, #3 + cbz limit_wd, .Lremain8 + /*load 8 bytes from aligned SRC1..*/ + ldr data1, [src1], #8 + ldr data2, [src2], #8 + + subs limit_wd, limit_wd, #1 + eor diff, data1, data2 /*Non-zero if differences found.*/ + csinv endloop, diff, xzr, ne + cbnz endloop, .Lunequal_proc + /*How far is the current SRC2 from the alignment boundary...*/ + and tmp3, tmp3, #7 + +.Lrecal_offset:/*src1 is aligned now..*/ + neg pos, tmp3 +.Lloopcmp_proc: + /* + * Divide the eight bytes into two parts. First,backwards the src2 + * to an alignment boundary,load eight bytes and compare from + * the SRC2 alignment boundary. If all 8 bytes are equal,then start + * the second part's comparison. Otherwise finish the comparison. + * This special handle can garantee all the accesses are in the + * thread/task space in avoid to overrange access. + */ + ldr data1, [src1,pos] + ldr data2, [src2,pos] + eor diff, data1, data2 /* Non-zero if differences found. */ + cbnz diff, .Lnot_limit + + /*The second part process*/ + ldr data1, [src1], #8 + ldr data2, [src2], #8 + eor diff, data1, data2 /* Non-zero if differences found. */ + subs limit_wd, limit_wd, #1 + csinv endloop, diff, xzr, ne/*if limit_wd is 0,will finish the cmp*/ + cbz endloop, .Lloopcmp_proc +.Lunequal_proc: + cbz diff, .Lremain8 + +/*There is differnence occured in the latest comparison.*/ +.Lnot_limit: +/* +* For little endian,reverse the low significant equal bits into MSB,then +* following CLZ can find how many equal bits exist. +*/ +CPU_LE( rev diff, diff ) +CPU_LE( rev data1, data1 ) +CPU_LE( rev data2, data2 ) + + /* + * The MS-non-zero bit of DIFF marks either the first bit + * that is different, or the end of the significant data. + * Shifting left now will bring the critical information into the + * top bits. + */ + clz pos, diff + lsl data1, data1, pos + lsl data2, data2, pos + /* + * We need to zero-extend (char is unsigned) the value and then + * perform a signed subtraction. + */ + lsr data1, data1, #56 + sub result, data1, data2, lsr #56 + ret + +.Lremain8: + /* Limit % 8 == 0 =>. all data are equal.*/ + ands limit, limit, #7 + b.eq .Lret0 + +.Ltiny8proc: + ldrb data1w, [src1], #1 + ldrb data2w, [src2], #1 + subs limit, limit, #1 + + ccmp data1w, data2w, #0, ne /* NZCV = 0b0000. */ + b.eq .Ltiny8proc + sub result, data1, data2 + ret +.Lret0: + mov result, #0 + ret +ENDPROC(memcmp) -- cgit v1.2.3 From 192c4d902f19b66902d7aacc19e9b169bebfb2e5 Mon Sep 17 00:00:00 2001 From: "zhichang.yuan" Date: Mon, 28 Apr 2014 13:11:33 +0800 Subject: arm64: lib: Implement optimized string compare routines This patch, based on Linaro's Cortex Strings library, adds an assembly optimized strcmp() and strncmp() functions. Signed-off-by: Zhichang Yuan Signed-off-by: Deepak Saxena Signed-off-by: Catalin Marinas --- arch/arm64/include/asm/string.h | 6 + arch/arm64/kernel/arm64ksyms.c | 2 + arch/arm64/lib/Makefile | 2 +- arch/arm64/lib/strcmp.S | 234 ++++++++++++++++++++++++++++++ arch/arm64/lib/strncmp.S | 310 ++++++++++++++++++++++++++++++++++++++++ 5 files changed, 553 insertions(+), 1 deletion(-) create mode 100644 arch/arm64/lib/strcmp.S create mode 100644 arch/arm64/lib/strncmp.S diff --git a/arch/arm64/include/asm/string.h b/arch/arm64/include/asm/string.h index 3a43305cda71..6133f4970027 100644 --- a/arch/arm64/include/asm/string.h +++ b/arch/arm64/include/asm/string.h @@ -22,6 +22,12 @@ extern char *strrchr(const char *, int c); #define __HAVE_ARCH_STRCHR extern char *strchr(const char *, int c); +#define __HAVE_ARCH_STRCMP +extern int strcmp(const char *, const char *); + +#define __HAVE_ARCH_STRNCMP +extern int strncmp(const char *, const char *, __kernel_size_t); + #define __HAVE_ARCH_MEMCPY extern void *memcpy(void *, const void *, __kernel_size_t); diff --git a/arch/arm64/kernel/arm64ksyms.c b/arch/arm64/kernel/arm64ksyms.c index 909c18e155ea..2784a79dbdd9 100644 --- a/arch/arm64/kernel/arm64ksyms.c +++ b/arch/arm64/kernel/arm64ksyms.c @@ -44,6 +44,8 @@ EXPORT_SYMBOL(memstart_addr); /* string / mem functions */ EXPORT_SYMBOL(strchr); EXPORT_SYMBOL(strrchr); +EXPORT_SYMBOL(strcmp); +EXPORT_SYMBOL(strncmp); EXPORT_SYMBOL(memset); EXPORT_SYMBOL(memcpy); EXPORT_SYMBOL(memmove); diff --git a/arch/arm64/lib/Makefile b/arch/arm64/lib/Makefile index 112c67f2b109..aaaf6180c558 100644 --- a/arch/arm64/lib/Makefile +++ b/arch/arm64/lib/Makefile @@ -1,4 +1,4 @@ lib-y := bitops.o clear_user.o delay.o copy_from_user.o \ copy_to_user.o copy_in_user.o copy_page.o \ clear_page.o memchr.o memcpy.o memmove.o memset.o \ - memcmp.o strchr.o strrchr.o + memcmp.o strcmp.o strncmp.o strchr.o strrchr.o diff --git a/arch/arm64/lib/strcmp.S b/arch/arm64/lib/strcmp.S new file mode 100644 index 000000000000..42f828b06c59 --- /dev/null +++ b/arch/arm64/lib/strcmp.S @@ -0,0 +1,234 @@ +/* + * Copyright (C) 2013 ARM Ltd. + * Copyright (C) 2013 Linaro. + * + * This code is based on glibc cortex strings work originally authored by Linaro + * and re-licensed under GPLv2 for the Linux kernel. The original code can + * be found @ + * + * http://bazaar.launchpad.net/~linaro-toolchain-dev/cortex-strings/trunk/ + * files/head:/src/aarch64/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include +#include + +/* + * compare two strings + * + * Parameters: + * x0 - const string 1 pointer + * x1 - const string 2 pointer + * Returns: + * x0 - an integer less than, equal to, or greater than zero + * if s1 is found, respectively, to be less than, to match, + * or be greater than s2. + */ + +#define REP8_01 0x0101010101010101 +#define REP8_7f 0x7f7f7f7f7f7f7f7f +#define REP8_80 0x8080808080808080 + +/* Parameters and result. */ +src1 .req x0 +src2 .req x1 +result .req x0 + +/* Internal variables. */ +data1 .req x2 +data1w .req w2 +data2 .req x3 +data2w .req w3 +has_nul .req x4 +diff .req x5 +syndrome .req x6 +tmp1 .req x7 +tmp2 .req x8 +tmp3 .req x9 +zeroones .req x10 +pos .req x11 + +ENTRY(strcmp) + eor tmp1, src1, src2 + mov zeroones, #REP8_01 + tst tmp1, #7 + b.ne .Lmisaligned8 + ands tmp1, src1, #7 + b.ne .Lmutual_align + + /* + * NUL detection works on the principle that (X - 1) & (~X) & 0x80 + * (=> (X - 1) & ~(X | 0x7f)) is non-zero iff a byte is zero, and + * can be done in parallel across the entire word. + */ +.Lloop_aligned: + ldr data1, [src1], #8 + ldr data2, [src2], #8 +.Lstart_realigned: + sub tmp1, data1, zeroones + orr tmp2, data1, #REP8_7f + eor diff, data1, data2 /* Non-zero if differences found. */ + bic has_nul, tmp1, tmp2 /* Non-zero if NUL terminator. */ + orr syndrome, diff, has_nul + cbz syndrome, .Lloop_aligned + b .Lcal_cmpresult + +.Lmutual_align: + /* + * Sources are mutually aligned, but are not currently at an + * alignment boundary. Round down the addresses and then mask off + * the bytes that preceed the start point. + */ + bic src1, src1, #7 + bic src2, src2, #7 + lsl tmp1, tmp1, #3 /* Bytes beyond alignment -> bits. */ + ldr data1, [src1], #8 + neg tmp1, tmp1 /* Bits to alignment -64. */ + ldr data2, [src2], #8 + mov tmp2, #~0 + /* Big-endian. Early bytes are at MSB. */ +CPU_BE( lsl tmp2, tmp2, tmp1 ) /* Shift (tmp1 & 63). */ + /* Little-endian. Early bytes are at LSB. */ +CPU_LE( lsr tmp2, tmp2, tmp1 ) /* Shift (tmp1 & 63). */ + + orr data1, data1, tmp2 + orr data2, data2, tmp2 + b .Lstart_realigned + +.Lmisaligned8: + /* + * Get the align offset length to compare per byte first. + * After this process, one string's address will be aligned. + */ + and tmp1, src1, #7 + neg tmp1, tmp1 + add tmp1, tmp1, #8 + and tmp2, src2, #7 + neg tmp2, tmp2 + add tmp2, tmp2, #8 + subs tmp3, tmp1, tmp2 + csel pos, tmp1, tmp2, hi /*Choose the maximum. */ +.Ltinycmp: + ldrb data1w, [src1], #1 + ldrb data2w, [src2], #1 + subs pos, pos, #1 + ccmp data1w, #1, #0, ne /* NZCV = 0b0000. */ + ccmp data1w, data2w, #0, cs /* NZCV = 0b0000. */ + b.eq .Ltinycmp + cbnz pos, 1f /*find the null or unequal...*/ + cmp data1w, #1 + ccmp data1w, data2w, #0, cs + b.eq .Lstart_align /*the last bytes are equal....*/ +1: + sub result, data1, data2 + ret + +.Lstart_align: + ands xzr, src1, #7 + b.eq .Lrecal_offset + /*process more leading bytes to make str1 aligned...*/ + add src1, src1, tmp3 + add src2, src2, tmp3 + /*load 8 bytes from aligned str1 and non-aligned str2..*/ + ldr data1, [src1], #8 + ldr data2, [src2], #8 + + sub tmp1, data1, zeroones + orr tmp2, data1, #REP8_7f + bic has_nul, tmp1, tmp2 + eor diff, data1, data2 /* Non-zero if differences found. */ + orr syndrome, diff, has_nul + cbnz syndrome, .Lcal_cmpresult + /*How far is the current str2 from the alignment boundary...*/ + and tmp3, tmp3, #7 +.Lrecal_offset: + neg pos, tmp3 +.Lloopcmp_proc: + /* + * Divide the eight bytes into two parts. First,backwards the src2 + * to an alignment boundary,load eight bytes from the SRC2 alignment + * boundary,then compare with the relative bytes from SRC1. + * If all 8 bytes are equal,then start the second part's comparison. + * Otherwise finish the comparison. + * This special handle can garantee all the accesses are in the + * thread/task space in avoid to overrange access. + */ + ldr data1, [src1,pos] + ldr data2, [src2,pos] + sub tmp1, data1, zeroones + orr tmp2, data1, #REP8_7f + bic has_nul, tmp1, tmp2 + eor diff, data1, data2 /* Non-zero if differences found. */ + orr syndrome, diff, has_nul + cbnz syndrome, .Lcal_cmpresult + + /*The second part process*/ + ldr data1, [src1], #8 + ldr data2, [src2], #8 + sub tmp1, data1, zeroones + orr tmp2, data1, #REP8_7f + bic has_nul, tmp1, tmp2 + eor diff, data1, data2 /* Non-zero if differences found. */ + orr syndrome, diff, has_nul + cbz syndrome, .Lloopcmp_proc + +.Lcal_cmpresult: + /* + * reversed the byte-order as big-endian,then CLZ can find the most + * significant zero bits. + */ +CPU_LE( rev syndrome, syndrome ) +CPU_LE( rev data1, data1 ) +CPU_LE( rev data2, data2 ) + + /* + * For big-endian we cannot use the trick with the syndrome value + * as carry-propagation can corrupt the upper bits if the trailing + * bytes in the string contain 0x01. + * However, if there is no NUL byte in the dword, we can generate + * the result directly. We ca not just subtract the bytes as the + * MSB might be significant. + */ +CPU_BE( cbnz has_nul, 1f ) +CPU_BE( cmp data1, data2 ) +CPU_BE( cset result, ne ) +CPU_BE( cneg result, result, lo ) +CPU_BE( ret ) +CPU_BE( 1: ) + /*Re-compute the NUL-byte detection, using a byte-reversed value. */ +CPU_BE( rev tmp3, data1 ) +CPU_BE( sub tmp1, tmp3, zeroones ) +CPU_BE( orr tmp2, tmp3, #REP8_7f ) +CPU_BE( bic has_nul, tmp1, tmp2 ) +CPU_BE( rev has_nul, has_nul ) +CPU_BE( orr syndrome, diff, has_nul ) + + clz pos, syndrome + /* + * The MS-non-zero bit of the syndrome marks either the first bit + * that is different, or the top bit of the first zero byte. + * Shifting left now will bring the critical information into the + * top bits. + */ + lsl data1, data1, pos + lsl data2, data2, pos + /* + * But we need to zero-extend (char is unsigned) the value and then + * perform a signed 32-bit subtraction. + */ + lsr data1, data1, #56 + sub result, data1, data2, lsr #56 + ret +ENDPROC(strcmp) diff --git a/arch/arm64/lib/strncmp.S b/arch/arm64/lib/strncmp.S new file mode 100644 index 000000000000..0224cf5a5533 --- /dev/null +++ b/arch/arm64/lib/strncmp.S @@ -0,0 +1,310 @@ +/* + * Copyright (C) 2013 ARM Ltd. + * Copyright (C) 2013 Linaro. + * + * This code is based on glibc cortex strings work originally authored by Linaro + * and re-licensed under GPLv2 for the Linux kernel. The original code can + * be found @ + * + * http://bazaar.launchpad.net/~linaro-toolchain-dev/cortex-strings/trunk/ + * files/head:/src/aarch64/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include +#include + +/* + * compare two strings + * + * Parameters: + * x0 - const string 1 pointer + * x1 - const string 2 pointer + * x2 - the maximal length to be compared + * Returns: + * x0 - an integer less than, equal to, or greater than zero if s1 is found, + * respectively, to be less than, to match, or be greater than s2. + */ + +#define REP8_01 0x0101010101010101 +#define REP8_7f 0x7f7f7f7f7f7f7f7f +#define REP8_80 0x8080808080808080 + +/* Parameters and result. */ +src1 .req x0 +src2 .req x1 +limit .req x2 +result .req x0 + +/* Internal variables. */ +data1 .req x3 +data1w .req w3 +data2 .req x4 +data2w .req w4 +has_nul .req x5 +diff .req x6 +syndrome .req x7 +tmp1 .req x8 +tmp2 .req x9 +tmp3 .req x10 +zeroones .req x11 +pos .req x12 +limit_wd .req x13 +mask .req x14 +endloop .req x15 + +ENTRY(strncmp) + cbz limit, .Lret0 + eor tmp1, src1, src2 + mov zeroones, #REP8_01 + tst tmp1, #7 + b.ne .Lmisaligned8 + ands tmp1, src1, #7 + b.ne .Lmutual_align + /* Calculate the number of full and partial words -1. */ + /* + * when limit is mulitply of 8, if not sub 1, + * the judgement of last dword will wrong. + */ + sub limit_wd, limit, #1 /* limit != 0, so no underflow. */ + lsr limit_wd, limit_wd, #3 /* Convert to Dwords. */ + + /* + * NUL detection works on the principle that (X - 1) & (~X) & 0x80 + * (=> (X - 1) & ~(X | 0x7f)) is non-zero iff a byte is zero, and + * can be done in parallel across the entire word. + */ +.Lloop_aligned: + ldr data1, [src1], #8 + ldr data2, [src2], #8 +.Lstart_realigned: + subs limit_wd, limit_wd, #1 + sub tmp1, data1, zeroones + orr tmp2, data1, #REP8_7f + eor diff, data1, data2 /* Non-zero if differences found. */ + csinv endloop, diff, xzr, pl /* Last Dword or differences.*/ + bics has_nul, tmp1, tmp2 /* Non-zero if NUL terminator. */ + ccmp endloop, #0, #0, eq + b.eq .Lloop_aligned + + /*Not reached the limit, must have found the end or a diff. */ + tbz limit_wd, #63, .Lnot_limit + + /* Limit % 8 == 0 => all bytes significant. */ + ands limit, limit, #7 + b.eq .Lnot_limit + + lsl limit, limit, #3 /* Bits -> bytes. */ + mov mask, #~0 +CPU_BE( lsr mask, mask, limit ) +CPU_LE( lsl mask, mask, limit ) + bic data1, data1, mask + bic data2, data2, mask + + /* Make sure that the NUL byte is marked in the syndrome. */ + orr has_nul, has_nul, mask + +.Lnot_limit: + orr syndrome, diff, has_nul + b .Lcal_cmpresult + +.Lmutual_align: + /* + * Sources are mutually aligned, but are not currently at an + * alignment boundary. Round down the addresses and then mask off + * the bytes that precede the start point. + * We also need to adjust the limit calculations, but without + * overflowing if the limit is near ULONG_MAX. + */ + bic src1, src1, #7 + bic src2, src2, #7 + ldr data1, [src1], #8 + neg tmp3, tmp1, lsl #3 /* 64 - bits(bytes beyond align). */ + ldr data2, [src2], #8 + mov tmp2, #~0 + sub limit_wd, limit, #1 /* limit != 0, so no underflow. */ + /* Big-endian. Early bytes are at MSB. */ +CPU_BE( lsl tmp2, tmp2, tmp3 ) /* Shift (tmp1 & 63). */ + /* Little-endian. Early bytes are at LSB. */ +CPU_LE( lsr tmp2, tmp2, tmp3 ) /* Shift (tmp1 & 63). */ + + and tmp3, limit_wd, #7 + lsr limit_wd, limit_wd, #3 + /* Adjust the limit. Only low 3 bits used, so overflow irrelevant.*/ + add limit, limit, tmp1 + add tmp3, tmp3, tmp1 + orr data1, data1, tmp2 + orr data2, data2, tmp2 + add limit_wd, limit_wd, tmp3, lsr #3 + b .Lstart_realigned + +/*when src1 offset is not equal to src2 offset...*/ +.Lmisaligned8: + cmp limit, #8 + b.lo .Ltiny8proc /*limit < 8... */ + /* + * Get the align offset length to compare per byte first. + * After this process, one string's address will be aligned.*/ + and tmp1, src1, #7 + neg tmp1, tmp1 + add tmp1, tmp1, #8 + and tmp2, src2, #7 + neg tmp2, tmp2 + add tmp2, tmp2, #8 + subs tmp3, tmp1, tmp2 + csel pos, tmp1, tmp2, hi /*Choose the maximum. */ + /* + * Here, limit is not less than 8, so directly run .Ltinycmp + * without checking the limit.*/ + sub limit, limit, pos +.Ltinycmp: + ldrb data1w, [src1], #1 + ldrb data2w, [src2], #1 + subs pos, pos, #1 + ccmp data1w, #1, #0, ne /* NZCV = 0b0000. */ + ccmp data1w, data2w, #0, cs /* NZCV = 0b0000. */ + b.eq .Ltinycmp + cbnz pos, 1f /*find the null or unequal...*/ + cmp data1w, #1 + ccmp data1w, data2w, #0, cs + b.eq .Lstart_align /*the last bytes are equal....*/ +1: + sub result, data1, data2 + ret + +.Lstart_align: + lsr limit_wd, limit, #3 + cbz limit_wd, .Lremain8 + /*process more leading bytes to make str1 aligned...*/ + ands xzr, src1, #7 + b.eq .Lrecal_offset + add src1, src1, tmp3 /*tmp3 is positive in this branch.*/ + add src2, src2, tmp3 + ldr data1, [src1], #8 + ldr data2, [src2], #8 + + sub limit, limit, tmp3 + lsr limit_wd, limit, #3 + subs limit_wd, limit_wd, #1 + + sub tmp1, data1, zeroones + orr tmp2, data1, #REP8_7f + eor diff, data1, data2 /* Non-zero if differences found. */ + csinv endloop, diff, xzr, ne/*if limit_wd is 0,will finish the cmp*/ + bics has_nul, tmp1, tmp2 + ccmp endloop, #0, #0, eq /*has_null is ZERO: no null byte*/ + b.ne .Lunequal_proc + /*How far is the current str2 from the alignment boundary...*/ + and tmp3, tmp3, #7 +.Lrecal_offset: + neg pos, tmp3 +.Lloopcmp_proc: + /* + * Divide the eight bytes into two parts. First,backwards the src2 + * to an alignment boundary,load eight bytes from the SRC2 alignment + * boundary,then compare with the relative bytes from SRC1. + * If all 8 bytes are equal,then start the second part's comparison. + * Otherwise finish the comparison. + * This special handle can garantee all the accesses are in the + * thread/task space in avoid to overrange access. + */ + ldr data1, [src1,pos] + ldr data2, [src2,pos] + sub tmp1, data1, zeroones + orr tmp2, data1, #REP8_7f + bics has_nul, tmp1, tmp2 /* Non-zero if NUL terminator. */ + eor diff, data1, data2 /* Non-zero if differences found. */ + csinv endloop, diff, xzr, eq + cbnz endloop, .Lunequal_proc + + /*The second part process*/ + ldr data1, [src1], #8 + ldr data2, [src2], #8 + subs limit_wd, limit_wd, #1 + sub tmp1, data1, zeroones + orr tmp2, data1, #REP8_7f + eor diff, data1, data2 /* Non-zero if differences found. */ + csinv endloop, diff, xzr, ne/*if limit_wd is 0,will finish the cmp*/ + bics has_nul, tmp1, tmp2 + ccmp endloop, #0, #0, eq /*has_null is ZERO: no null byte*/ + b.eq .Lloopcmp_proc + +.Lunequal_proc: + orr syndrome, diff, has_nul + cbz syndrome, .Lremain8 +.Lcal_cmpresult: + /* + * reversed the byte-order as big-endian,then CLZ can find the most + * significant zero bits. + */ +CPU_LE( rev syndrome, syndrome ) +CPU_LE( rev data1, data1 ) +CPU_LE( rev data2, data2 ) + /* + * For big-endian we cannot use the trick with the syndrome value + * as carry-propagation can corrupt the upper bits if the trailing + * bytes in the string contain 0x01. + * However, if there is no NUL byte in the dword, we can generate + * the result directly. We can't just subtract the bytes as the + * MSB might be significant. + */ +CPU_BE( cbnz has_nul, 1f ) +CPU_BE( cmp data1, data2 ) +CPU_BE( cset result, ne ) +CPU_BE( cneg result, result, lo ) +CPU_BE( ret ) +CPU_BE( 1: ) + /* Re-compute the NUL-byte detection, using a byte-reversed value.*/ +CPU_BE( rev tmp3, data1 ) +CPU_BE( sub tmp1, tmp3, zeroones ) +CPU_BE( orr tmp2, tmp3, #REP8_7f ) +CPU_BE( bic has_nul, tmp1, tmp2 ) +CPU_BE( rev has_nul, has_nul ) +CPU_BE( orr syndrome, diff, has_nul ) + /* + * The MS-non-zero bit of the syndrome marks either the first bit + * that is different, or the top bit of the first zero byte. + * Shifting left now will bring the critical information into the + * top bits. + */ + clz pos, syndrome + lsl data1, data1, pos + lsl data2, data2, pos + /* + * But we need to zero-extend (char is unsigned) the value and then + * perform a signed 32-bit subtraction. + */ + lsr data1, data1, #56 + sub result, data1, data2, lsr #56 + ret + +.Lremain8: + /* Limit % 8 == 0 => all bytes significant. */ + ands limit, limit, #7 + b.eq .Lret0 +.Ltiny8proc: + ldrb data1w, [src1], #1 + ldrb data2w, [src2], #1 + subs limit, limit, #1 + + ccmp data1w, #1, #0, ne /* NZCV = 0b0000. */ + ccmp data1w, data2w, #0, cs /* NZCV = 0b0000. */ + b.eq .Ltiny8proc + sub result, data1, data2 + ret + +.Lret0: + mov result, #0 + ret +ENDPROC(strncmp) -- cgit v1.2.3 From 0a42cb0a6fa64cb17db11164a1ad3511b43acefe Mon Sep 17 00:00:00 2001 From: "zhichang.yuan" Date: Mon, 28 Apr 2014 13:11:34 +0800 Subject: arm64: lib: Implement optimized string length routines This patch, based on Linaro's Cortex Strings library, adds an assembly optimized strlen() and strnlen() functions. Signed-off-by: Zhichang Yuan Signed-off-by: Deepak Saxena Signed-off-by: Catalin Marinas --- arch/arm64/include/asm/string.h | 6 ++ arch/arm64/kernel/arm64ksyms.c | 2 + arch/arm64/lib/Makefile | 3 +- arch/arm64/lib/strlen.S | 126 +++++++++++++++++++++++++++++ arch/arm64/lib/strnlen.S | 171 ++++++++++++++++++++++++++++++++++++++++ 5 files changed, 307 insertions(+), 1 deletion(-) create mode 100644 arch/arm64/lib/strlen.S create mode 100644 arch/arm64/lib/strnlen.S diff --git a/arch/arm64/include/asm/string.h b/arch/arm64/include/asm/string.h index 6133f4970027..64d2d4884a9d 100644 --- a/arch/arm64/include/asm/string.h +++ b/arch/arm64/include/asm/string.h @@ -28,6 +28,12 @@ extern int strcmp(const char *, const char *); #define __HAVE_ARCH_STRNCMP extern int strncmp(const char *, const char *, __kernel_size_t); +#define __HAVE_ARCH_STRLEN +extern __kernel_size_t strlen(const char *); + +#define __HAVE_ARCH_STRNLEN +extern __kernel_size_t strnlen(const char *, __kernel_size_t); + #define __HAVE_ARCH_MEMCPY extern void *memcpy(void *, const void *, __kernel_size_t); diff --git a/arch/arm64/kernel/arm64ksyms.c b/arch/arm64/kernel/arm64ksyms.c index 2784a79dbdd9..1edc792b4a1f 100644 --- a/arch/arm64/kernel/arm64ksyms.c +++ b/arch/arm64/kernel/arm64ksyms.c @@ -46,6 +46,8 @@ EXPORT_SYMBOL(strchr); EXPORT_SYMBOL(strrchr); EXPORT_SYMBOL(strcmp); EXPORT_SYMBOL(strncmp); +EXPORT_SYMBOL(strlen); +EXPORT_SYMBOL(strnlen); EXPORT_SYMBOL(memset); EXPORT_SYMBOL(memcpy); EXPORT_SYMBOL(memmove); diff --git a/arch/arm64/lib/Makefile b/arch/arm64/lib/Makefile index aaaf6180c558..d98d3e39879e 100644 --- a/arch/arm64/lib/Makefile +++ b/arch/arm64/lib/Makefile @@ -1,4 +1,5 @@ lib-y := bitops.o clear_user.o delay.o copy_from_user.o \ copy_to_user.o copy_in_user.o copy_page.o \ clear_page.o memchr.o memcpy.o memmove.o memset.o \ - memcmp.o strcmp.o strncmp.o strchr.o strrchr.o + memcmp.o strcmp.o strncmp.o strlen.o strnlen.o \ + strchr.o strrchr.o diff --git a/arch/arm64/lib/strlen.S b/arch/arm64/lib/strlen.S new file mode 100644 index 000000000000..987b68b9ce44 --- /dev/null +++ b/arch/arm64/lib/strlen.S @@ -0,0 +1,126 @@ +/* + * Copyright (C) 2013 ARM Ltd. + * Copyright (C) 2013 Linaro. + * + * This code is based on glibc cortex strings work originally authored by Linaro + * and re-licensed under GPLv2 for the Linux kernel. The original code can + * be found @ + * + * http://bazaar.launchpad.net/~linaro-toolchain-dev/cortex-strings/trunk/ + * files/head:/src/aarch64/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include +#include + +/* + * calculate the length of a string + * + * Parameters: + * x0 - const string pointer + * Returns: + * x0 - the return length of specific string + */ + +/* Arguments and results. */ +srcin .req x0 +len .req x0 + +/* Locals and temporaries. */ +src .req x1 +data1 .req x2 +data2 .req x3 +data2a .req x4 +has_nul1 .req x5 +has_nul2 .req x6 +tmp1 .req x7 +tmp2 .req x8 +tmp3 .req x9 +tmp4 .req x10 +zeroones .req x11 +pos .req x12 + +#define REP8_01 0x0101010101010101 +#define REP8_7f 0x7f7f7f7f7f7f7f7f +#define REP8_80 0x8080808080808080 + +ENTRY(strlen) + mov zeroones, #REP8_01 + bic src, srcin, #15 + ands tmp1, srcin, #15 + b.ne .Lmisaligned + /* + * NUL detection works on the principle that (X - 1) & (~X) & 0x80 + * (=> (X - 1) & ~(X | 0x7f)) is non-zero iff a byte is zero, and + * can be done in parallel across the entire word. + */ + /* + * The inner loop deals with two Dwords at a time. This has a + * slightly higher start-up cost, but we should win quite quickly, + * especially on cores with a high number of issue slots per + * cycle, as we get much better parallelism out of the operations. + */ +.Lloop: + ldp data1, data2, [src], #16 +.Lrealigned: + sub tmp1, data1, zeroones + orr tmp2, data1, #REP8_7f + sub tmp3, data2, zeroones + orr tmp4, data2, #REP8_7f + bic has_nul1, tmp1, tmp2 + bics has_nul2, tmp3, tmp4 + ccmp has_nul1, #0, #0, eq /* NZCV = 0000 */ + b.eq .Lloop + + sub len, src, srcin + cbz has_nul1, .Lnul_in_data2 +CPU_BE( mov data2, data1 ) /*prepare data to re-calculate the syndrome*/ + sub len, len, #8 + mov has_nul2, has_nul1 +.Lnul_in_data2: + /* + * For big-endian, carry propagation (if the final byte in the + * string is 0x01) means we cannot use has_nul directly. The + * easiest way to get the correct byte is to byte-swap the data + * and calculate the syndrome a second time. + */ +CPU_BE( rev data2, data2 ) +CPU_BE( sub tmp1, data2, zeroones ) +CPU_BE( orr tmp2, data2, #REP8_7f ) +CPU_BE( bic has_nul2, tmp1, tmp2 ) + + sub len, len, #8 + rev has_nul2, has_nul2 + clz pos, has_nul2 + add len, len, pos, lsr #3 /* Bits to bytes. */ + ret + +.Lmisaligned: + cmp tmp1, #8 + neg tmp1, tmp1 + ldp data1, data2, [src], #16 + lsl tmp1, tmp1, #3 /* Bytes beyond alignment -> bits. */ + mov tmp2, #~0 + /* Big-endian. Early bytes are at MSB. */ +CPU_BE( lsl tmp2, tmp2, tmp1 ) /* Shift (tmp1 & 63). */ + /* Little-endian. Early bytes are at LSB. */ +CPU_LE( lsr tmp2, tmp2, tmp1 ) /* Shift (tmp1 & 63). */ + + orr data1, data1, tmp2 + orr data2a, data2, tmp2 + csinv data1, data1, xzr, le + csel data2, data2, data2a, le + b .Lrealigned +ENDPROC(strlen) diff --git a/arch/arm64/lib/strnlen.S b/arch/arm64/lib/strnlen.S new file mode 100644 index 000000000000..2ca665711bf2 --- /dev/null +++ b/arch/arm64/lib/strnlen.S @@ -0,0 +1,171 @@ +/* + * Copyright (C) 2013 ARM Ltd. + * Copyright (C) 2013 Linaro. + * + * This code is based on glibc cortex strings work originally authored by Linaro + * and re-licensed under GPLv2 for the Linux kernel. The original code can + * be found @ + * + * http://bazaar.launchpad.net/~linaro-toolchain-dev/cortex-strings/trunk/ + * files/head:/src/aarch64/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include +#include + +/* + * determine the length of a fixed-size string + * + * Parameters: + * x0 - const string pointer + * x1 - maximal string length + * Returns: + * x0 - the return length of specific string + */ + +/* Arguments and results. */ +srcin .req x0 +len .req x0 +limit .req x1 + +/* Locals and temporaries. */ +src .req x2 +data1 .req x3 +data2 .req x4 +data2a .req x5 +has_nul1 .req x6 +has_nul2 .req x7 +tmp1 .req x8 +tmp2 .req x9 +tmp3 .req x10 +tmp4 .req x11 +zeroones .req x12 +pos .req x13 +limit_wd .req x14 + +#define REP8_01 0x0101010101010101 +#define REP8_7f 0x7f7f7f7f7f7f7f7f +#define REP8_80 0x8080808080808080 + +ENTRY(strnlen) + cbz limit, .Lhit_limit + mov zeroones, #REP8_01 + bic src, srcin, #15 + ands tmp1, srcin, #15 + b.ne .Lmisaligned + /* Calculate the number of full and partial words -1. */ + sub limit_wd, limit, #1 /* Limit != 0, so no underflow. */ + lsr limit_wd, limit_wd, #4 /* Convert to Qwords. */ + + /* + * NUL detection works on the principle that (X - 1) & (~X) & 0x80 + * (=> (X - 1) & ~(X | 0x7f)) is non-zero iff a byte is zero, and + * can be done in parallel across the entire word. + */ + /* + * The inner loop deals with two Dwords at a time. This has a + * slightly higher start-up cost, but we should win quite quickly, + * especially on cores with a high number of issue slots per + * cycle, as we get much better parallelism out of the operations. + */ +.Lloop: + ldp data1, data2, [src], #16 +.Lrealigned: + sub tmp1, data1, zeroones + orr tmp2, data1, #REP8_7f + sub tmp3, data2, zeroones + orr tmp4, data2, #REP8_7f + bic has_nul1, tmp1, tmp2 + bic has_nul2, tmp3, tmp4 + subs limit_wd, limit_wd, #1 + orr tmp1, has_nul1, has_nul2 + ccmp tmp1, #0, #0, pl /* NZCV = 0000 */ + b.eq .Lloop + + cbz tmp1, .Lhit_limit /* No null in final Qword. */ + + /* + * We know there's a null in the final Qword. The easiest thing + * to do now is work out the length of the string and return + * MIN (len, limit). + */ + sub len, src, srcin + cbz has_nul1, .Lnul_in_data2 +CPU_BE( mov data2, data1 ) /*perpare data to re-calculate the syndrome*/ + + sub len, len, #8 + mov has_nul2, has_nul1 +.Lnul_in_data2: + /* + * For big-endian, carry propagation (if the final byte in the + * string is 0x01) means we cannot use has_nul directly. The + * easiest way to get the correct byte is to byte-swap the data + * and calculate the syndrome a second time. + */ +CPU_BE( rev data2, data2 ) +CPU_BE( sub tmp1, data2, zeroones ) +CPU_BE( orr tmp2, data2, #REP8_7f ) +CPU_BE( bic has_nul2, tmp1, tmp2 ) + + sub len, len, #8 + rev has_nul2, has_nul2 + clz pos, has_nul2 + add len, len, pos, lsr #3 /* Bits to bytes. */ + cmp len, limit + csel len, len, limit, ls /* Return the lower value. */ + ret + +.Lmisaligned: + /* + * Deal with a partial first word. + * We're doing two things in parallel here; + * 1) Calculate the number of words (but avoiding overflow if + * limit is near ULONG_MAX) - to do this we need to work out + * limit + tmp1 - 1 as a 65-bit value before shifting it; + * 2) Load and mask the initial data words - we force the bytes + * before the ones we are interested in to 0xff - this ensures + * early bytes will not hit any zero detection. + */ + ldp data1, data2, [src], #16 + + sub limit_wd, limit, #1 + and tmp3, limit_wd, #15 + lsr limit_wd, limit_wd, #4 + + add tmp3, tmp3, tmp1 + add limit_wd, limit_wd, tmp3, lsr #4 + + neg tmp4, tmp1 + lsl tmp4, tmp4, #3 /* Bytes beyond alignment -> bits. */ + + mov tmp2, #~0 + /* Big-endian. Early bytes are at MSB. */ +CPU_BE( lsl tmp2, tmp2, tmp4 ) /* Shift (tmp1 & 63). */ + /* Little-endian. Early bytes are at LSB. */ +CPU_LE( lsr tmp2, tmp2, tmp4 ) /* Shift (tmp1 & 63). */ + + cmp tmp1, #8 + + orr data1, data1, tmp2 + orr data2a, data2, tmp2 + + csinv data1, data1, xzr, le + csel data2, data2, data2a, le + b .Lrealigned + +.Lhit_limit: + mov len, limit + ret +ENDPROC(strnlen) -- cgit v1.2.3 From af885f4022622331f17227dfcfbb2dafdee25a43 Mon Sep 17 00:00:00 2001 From: Geoff Levand Date: Fri, 16 May 2014 18:26:01 +0100 Subject: arm64: Fix linker script entry point Change the arm64 linker script ENTRY() command to define _text as the kernel entry point. The arm64 boot protocol specifies that the kernel must be entered at the beginning of the kernel image. The existing ENTRY() command defined the symbol stext as the entry point, which emitted an incorrect entry point, but would not cause a runtime error because the existing entry code immediately jumps to stext. Signed-off-by: Geoff Levand Acked-by: Will Deacon Signed-off-by: Catalin Marinas --- arch/arm64/kernel/vmlinux.lds.S | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm64/kernel/vmlinux.lds.S b/arch/arm64/kernel/vmlinux.lds.S index 4ba7a55b49c7..f1e6d5c032e1 100644 --- a/arch/arm64/kernel/vmlinux.lds.S +++ b/arch/arm64/kernel/vmlinux.lds.S @@ -13,7 +13,7 @@ #define ARM_EXIT_DISCARD(x) x OUTPUT_ARCH(aarch64) -ENTRY(stext) +ENTRY(_text) jiffies = jiffies_64; -- cgit v1.2.3 From 26e9b83a7d3e9dbe276301b637f65321bdd0939b Mon Sep 17 00:00:00 2001 From: AKASHI Takahiro Date: Wed, 30 Apr 2014 10:54:30 +0100 Subject: arm64: add __ASSEMBLY__ in asm/insn.h Since insn.h is indirectly included in asm/entry-ftrace.S, we need to exclude some declarations by __ASSEMBLY__. Acked-by: Will Deacon Signed-off-by: AKASHI Takahiro Signed-off-by: Will Deacon --- arch/arm64/include/asm/insn.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm64/include/asm/insn.h b/arch/arm64/include/asm/insn.h index c44ad39ed310..dc1f73b13e74 100644 --- a/arch/arm64/include/asm/insn.h +++ b/arch/arm64/include/asm/insn.h @@ -21,6 +21,7 @@ /* A64 instructions are always 32 bits. */ #define AARCH64_INSN_SIZE 4 +#ifndef __ASSEMBLY__ /* * ARM Architecture Reference Manual for ARMv8 Profile-A, Issue A.a * Section C3.1 "A64 instruction index by encoding": @@ -104,5 +105,6 @@ bool aarch64_insn_hotpatch_safe(u32 old_insn, u32 new_insn); int aarch64_insn_patch_text_nosync(void *addr, u32 insn); int aarch64_insn_patch_text_sync(void *addrs[], u32 insns[], int cnt); int aarch64_insn_patch_text(void *addrs[], u32 insns[], int cnt); +#endif /* __ASSEMBLY__ */ #endif /* __ASM_INSN_H */ -- cgit v1.2.3 From 26e2ae39995469b9289aa1ec0144e256d56eb044 Mon Sep 17 00:00:00 2001 From: AKASHI Takahiro Date: Wed, 30 Apr 2014 10:54:31 +0100 Subject: arm64: Add 'notrace' attribute to unwind_frame() for ftrace walk_stackframe() calls unwind_frame(), and if walk_stackframe() is "notrace", unwind_frame() should be also "notrace". Acked-by: Will Deacon Signed-off-by: AKASHI Takahiro Signed-off-by: Will Deacon --- arch/arm64/kernel/stacktrace.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm64/kernel/stacktrace.c b/arch/arm64/kernel/stacktrace.c index 38f0558f0c0a..55437ba1f5a4 100644 --- a/arch/arm64/kernel/stacktrace.c +++ b/arch/arm64/kernel/stacktrace.c @@ -35,7 +35,7 @@ * ldp x29, x30, [sp] * add sp, sp, #0x10 */ -int unwind_frame(struct stackframe *frame) +int notrace unwind_frame(struct stackframe *frame) { unsigned long high, low; unsigned long fp = frame->fp; -- cgit v1.2.3 From af64d2aa872a174772ffc00e2558083f70193acb Mon Sep 17 00:00:00 2001 From: AKASHI Takahiro Date: Wed, 30 Apr 2014 10:54:32 +0100 Subject: ftrace: Add arm64 support to recordmcount Recordmcount utility under scripts is run, after compiling each object, to find out all the locations of calling _mcount() and put them into specific seciton named __mcount_loc. Then linker collects all such information into a table in the kernel image (between __start_mcount_loc and __stop_mcount_loc) for later use by ftrace. This patch adds arm64 specific definitions to identify such locations. There are two types of implementation, C and Perl. On arm64, only C version is used to build the kernel now that CONFIG_HAVE_C_RECORDMCOUNT is on. But Perl version is also maintained. This patch also contains a workaround just in case where a header file, elf.h, on host machine doesn't have definitions of EM_AARCH64 nor R_AARCH64_ABS64. Without them, compiling C version of recordmcount will fail. Acked-by: Will Deacon Signed-off-by: AKASHI Takahiro Signed-off-by: Will Deacon --- arch/arm64/Kconfig | 2 ++ scripts/recordmcount.c | 7 +++++++ scripts/recordmcount.pl | 5 +++++ 3 files changed, 14 insertions(+) diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig index 78b356d079dd..c7022a9d5eeb 100644 --- a/arch/arm64/Kconfig +++ b/arch/arm64/Kconfig @@ -30,12 +30,14 @@ config ARM64 select HAVE_ARCH_JUMP_LABEL select HAVE_ARCH_KGDB select HAVE_ARCH_TRACEHOOK + select HAVE_C_RECORDMCOUNT select HAVE_DEBUG_BUGVERBOSE select HAVE_DEBUG_KMEMLEAK select HAVE_DMA_API_DEBUG select HAVE_DMA_ATTRS select HAVE_DMA_CONTIGUOUS select HAVE_EFFICIENT_UNALIGNED_ACCESS + select HAVE_FTRACE_MCOUNT_RECORD select HAVE_GENERIC_DMA_COHERENT select HAVE_HW_BREAKPOINT if PERF_EVENTS select HAVE_MEMBLOCK diff --git a/scripts/recordmcount.c b/scripts/recordmcount.c index 9c22317778eb..e11aa4a156d2 100644 --- a/scripts/recordmcount.c +++ b/scripts/recordmcount.c @@ -40,6 +40,11 @@ #define R_METAG_NONE 3 #endif +#ifndef EM_AARCH64 +#define EM_AARCH64 183 +#define R_AARCH64_ABS64 257 +#endif + static int fd_map; /* File descriptor for file being modified. */ static int mmap_failed; /* Boolean flag. */ static void *ehdr_curr; /* current ElfXX_Ehdr * for resource cleanup */ @@ -347,6 +352,8 @@ do_file(char const *const fname) case EM_ARM: reltype = R_ARM_ABS32; altmcount = "__gnu_mcount_nc"; break; + case EM_AARCH64: + reltype = R_AARCH64_ABS64; gpfx = '_'; break; case EM_IA_64: reltype = R_IA64_IMM64; gpfx = '_'; break; case EM_METAG: reltype = R_METAG_ADDR32; altmcount = "_mcount_wrapper"; diff --git a/scripts/recordmcount.pl b/scripts/recordmcount.pl index 91280b82da08..397b6b84e8c5 100755 --- a/scripts/recordmcount.pl +++ b/scripts/recordmcount.pl @@ -279,6 +279,11 @@ if ($arch eq "x86_64") { $mcount_regex = "^\\s*([0-9a-fA-F]+):\\s*R_ARM_(CALL|PC24|THM_CALL)" . "\\s+(__gnu_mcount_nc|mcount)\$"; +} elsif ($arch eq "arm64") { + $alignment = 3; + $section_type = '%progbits'; + $mcount_regex = "^\\s*([0-9a-fA-F]+):\\s*R_AARCH64_CALL26\\s+_mcount\$"; + $type = ".quad"; } elsif ($arch eq "ia64") { $mcount_regex = "^\\s*([0-9a-fA-F]+):.*\\s_mcount\$"; $type = "data8"; -- cgit v1.2.3 From 819e50e25d0ce8a75f5cba815416a6a8573655c4 Mon Sep 17 00:00:00 2001 From: AKASHI Takahiro Date: Wed, 30 Apr 2014 18:54:33 +0900 Subject: arm64: Add ftrace support This patch implements arm64 specific part to support function tracers, such as function (CONFIG_FUNCTION_TRACER), function_graph (CONFIG_FUNCTION_GRAPH_TRACER) and function profiler (CONFIG_FUNCTION_PROFILER). With 'function' tracer, all the functions in the kernel are traced with timestamps in ${sysfs}/tracing/trace. If function_graph tracer is specified, call graph is generated. The kernel must be compiled with -pg option so that _mcount() is inserted at the beginning of functions. This function is called on every function's entry as long as tracing is enabled. In addition, function_graph tracer also needs to be able to probe function's exit. ftrace_graph_caller() & return_to_handler do this by faking link register's value to intercept function's return path. More details on architecture specific requirements are described in Documentation/trace/ftrace-design.txt. Reviewed-by: Ganapatrao Kulkarni Acked-by: Will Deacon Signed-off-by: AKASHI Takahiro Signed-off-by: Will Deacon --- arch/arm64/Kconfig | 2 + arch/arm64/include/asm/ftrace.h | 23 +++++ arch/arm64/kernel/Makefile | 4 + arch/arm64/kernel/arm64ksyms.c | 4 + arch/arm64/kernel/entry-ftrace.S | 175 +++++++++++++++++++++++++++++++++++++++ arch/arm64/kernel/ftrace.c | 64 ++++++++++++++ 6 files changed, 272 insertions(+) create mode 100644 arch/arm64/include/asm/ftrace.h create mode 100644 arch/arm64/kernel/entry-ftrace.S create mode 100644 arch/arm64/kernel/ftrace.c diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig index c7022a9d5eeb..8a25a4ad3159 100644 --- a/arch/arm64/Kconfig +++ b/arch/arm64/Kconfig @@ -38,6 +38,8 @@ config ARM64 select HAVE_DMA_CONTIGUOUS select HAVE_EFFICIENT_UNALIGNED_ACCESS select HAVE_FTRACE_MCOUNT_RECORD + select HAVE_FUNCTION_TRACER + select HAVE_FUNCTION_GRAPH_TRACER select HAVE_GENERIC_DMA_COHERENT select HAVE_HW_BREAKPOINT if PERF_EVENTS select HAVE_MEMBLOCK diff --git a/arch/arm64/include/asm/ftrace.h b/arch/arm64/include/asm/ftrace.h new file mode 100644 index 000000000000..58ea5951b198 --- /dev/null +++ b/arch/arm64/include/asm/ftrace.h @@ -0,0 +1,23 @@ +/* + * arch/arm64/include/asm/ftrace.h + * + * Copyright (C) 2013 Linaro Limited + * Author: AKASHI Takahiro + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __ASM_FTRACE_H +#define __ASM_FTRACE_H + +#include + +#define MCOUNT_ADDR ((unsigned long)_mcount) +#define MCOUNT_INSN_SIZE AARCH64_INSN_SIZE + +#ifndef __ASSEMBLY__ +extern void _mcount(unsigned long); +#endif /* __ASSEMBLY__ */ + +#endif /* __ASM_FTRACE_H */ diff --git a/arch/arm64/kernel/Makefile b/arch/arm64/kernel/Makefile index 7d811d9522bc..1ebcb4c6b5d8 100644 --- a/arch/arm64/kernel/Makefile +++ b/arch/arm64/kernel/Makefile @@ -5,6 +5,9 @@ CPPFLAGS_vmlinux.lds := -DTEXT_OFFSET=$(TEXT_OFFSET) AFLAGS_head.o := -DTEXT_OFFSET=$(TEXT_OFFSET) +CFLAGS_REMOVE_ftrace.o = -pg +CFLAGS_REMOVE_insn.o = -pg + # Object file lists. arm64-obj-y := cputable.o debug-monitors.o entry.o irq.o fpsimd.o \ entry-fpsimd.o process.o ptrace.o setup.o signal.o \ @@ -13,6 +16,7 @@ arm64-obj-y := cputable.o debug-monitors.o entry.o irq.o fpsimd.o \ arm64-obj-$(CONFIG_COMPAT) += sys32.o kuser32.o signal32.o \ sys_compat.o +arm64-obj-$(CONFIG_FUNCTION_TRACER) += ftrace.o entry-ftrace.o arm64-obj-$(CONFIG_MODULES) += arm64ksyms.o module.o arm64-obj-$(CONFIG_SMP) += smp.o smp_spin_table.o topology.o arm64-obj-$(CONFIG_PERF_EVENTS) += perf_regs.o diff --git a/arch/arm64/kernel/arm64ksyms.c b/arch/arm64/kernel/arm64ksyms.c index 1edc792b4a1f..a85843ddbde8 100644 --- a/arch/arm64/kernel/arm64ksyms.c +++ b/arch/arm64/kernel/arm64ksyms.c @@ -61,3 +61,7 @@ EXPORT_SYMBOL(clear_bit); EXPORT_SYMBOL(test_and_clear_bit); EXPORT_SYMBOL(change_bit); EXPORT_SYMBOL(test_and_change_bit); + +#ifdef CONFIG_FUNCTION_TRACER +EXPORT_SYMBOL(_mcount); +#endif diff --git a/arch/arm64/kernel/entry-ftrace.S b/arch/arm64/kernel/entry-ftrace.S new file mode 100644 index 000000000000..b2d8c4559cd8 --- /dev/null +++ b/arch/arm64/kernel/entry-ftrace.S @@ -0,0 +1,175 @@ +/* + * arch/arm64/kernel/entry-ftrace.S + * + * Copyright (C) 2013 Linaro Limited + * Author: AKASHI Takahiro + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include + +/* + * Gcc with -pg will put the following code in the beginning of each function: + * mov x0, x30 + * bl _mcount + * [function's body ...] + * "bl _mcount" may be replaced to "bl ftrace_caller" or NOP if dynamic + * ftrace is enabled. + * + * Please note that x0 as an argument will not be used here because we can + * get lr(x30) of instrumented function at any time by winding up call stack + * as long as the kernel is compiled without -fomit-frame-pointer. + * (or CONFIG_FRAME_POINTER, this is forced on arm64) + * + * stack layout after mcount_enter in _mcount(): + * + * current sp/fp => 0:+-----+ + * in _mcount() | x29 | -> instrumented function's fp + * +-----+ + * | x30 | -> _mcount()'s lr (= instrumented function's pc) + * old sp => +16:+-----+ + * when instrumented | | + * function calls | ... | + * _mcount() | | + * | | + * instrumented => +xx:+-----+ + * function's fp | x29 | -> parent's fp + * +-----+ + * | x30 | -> instrumented function's lr (= parent's pc) + * +-----+ + * | ... | + */ + + .macro mcount_enter + stp x29, x30, [sp, #-16]! + mov x29, sp + .endm + + .macro mcount_exit + ldp x29, x30, [sp], #16 + ret + .endm + + .macro mcount_adjust_addr rd, rn + sub \rd, \rn, #AARCH64_INSN_SIZE + .endm + + /* for instrumented function's parent */ + .macro mcount_get_parent_fp reg + ldr \reg, [x29] + ldr \reg, [\reg] + .endm + + /* for instrumented function */ + .macro mcount_get_pc0 reg + mcount_adjust_addr \reg, x30 + .endm + + .macro mcount_get_pc reg + ldr \reg, [x29, #8] + mcount_adjust_addr \reg, \reg + .endm + + .macro mcount_get_lr reg + ldr \reg, [x29] + ldr \reg, [\reg, #8] + mcount_adjust_addr \reg, \reg + .endm + + .macro mcount_get_lr_addr reg + ldr \reg, [x29] + add \reg, \reg, #8 + .endm + +/* + * void _mcount(unsigned long return_address) + * @return_address: return address to instrumented function + * + * This function makes calls, if enabled, to: + * - tracer function to probe instrumented function's entry, + * - ftrace_graph_caller to set up an exit hook + */ +ENTRY(_mcount) +#ifdef CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST + ldr x0, =ftrace_trace_stop + ldr x0, [x0] // if ftrace_trace_stop + ret // return; +#endif + mcount_enter + + ldr x0, =ftrace_trace_function + ldr x2, [x0] + adr x0, ftrace_stub + cmp x0, x2 // if (ftrace_trace_function + b.eq skip_ftrace_call // != ftrace_stub) { + + mcount_get_pc x0 // function's pc + mcount_get_lr x1 // function's lr (= parent's pc) + blr x2 // (*ftrace_trace_function)(pc, lr); + +#ifndef CONFIG_FUNCTION_GRAPH_TRACER +skip_ftrace_call: // return; + mcount_exit // } +#else + mcount_exit // return; + // } +skip_ftrace_call: + ldr x1, =ftrace_graph_return + ldr x2, [x1] // if ((ftrace_graph_return + cmp x0, x2 // != ftrace_stub) + b.ne ftrace_graph_caller + + ldr x1, =ftrace_graph_entry // || (ftrace_graph_entry + ldr x2, [x1] // != ftrace_graph_entry_stub)) + ldr x0, =ftrace_graph_entry_stub + cmp x0, x2 + b.ne ftrace_graph_caller // ftrace_graph_caller(); + + mcount_exit +#endif /* CONFIG_FUNCTION_GRAPH_TRACER */ +ENDPROC(_mcount) + +ENTRY(ftrace_stub) + ret +ENDPROC(ftrace_stub) + +#ifdef CONFIG_FUNCTION_GRAPH_TRACER +/* + * void ftrace_graph_caller(void) + * + * Called from _mcount() or ftrace_caller() when function_graph tracer is + * selected. + * This function w/ prepare_ftrace_return() fakes link register's value on + * the call stack in order to intercept instrumented function's return path + * and run return_to_handler() later on its exit. + */ +ENTRY(ftrace_graph_caller) + mcount_get_lr_addr x0 // pointer to function's saved lr + mcount_get_pc x1 // function's pc + mcount_get_parent_fp x2 // parent's fp + bl prepare_ftrace_return // prepare_ftrace_return(&lr, pc, fp) + + mcount_exit +ENDPROC(ftrace_graph_caller) + +/* + * void return_to_handler(void) + * + * Run ftrace_return_to_handler() before going back to parent. + * @fp is checked against the value passed by ftrace_graph_caller() + * only when CONFIG_FUNCTION_GRAPH_FP_TEST is enabled. + */ +ENTRY(return_to_handler) + str x0, [sp, #-16]! + mov x0, x29 // parent's fp + bl ftrace_return_to_handler// addr = ftrace_return_to_hander(fp); + mov x30, x0 // restore the original return address + ldr x0, [sp], #16 + ret +END(return_to_handler) +#endif /* CONFIG_FUNCTION_GRAPH_TRACER */ diff --git a/arch/arm64/kernel/ftrace.c b/arch/arm64/kernel/ftrace.c new file mode 100644 index 000000000000..a559ab86999b --- /dev/null +++ b/arch/arm64/kernel/ftrace.c @@ -0,0 +1,64 @@ +/* + * arch/arm64/kernel/ftrace.c + * + * Copyright (C) 2013 Linaro Limited + * Author: AKASHI Takahiro + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include + +#include +#include +#include + +#ifdef CONFIG_FUNCTION_GRAPH_TRACER +/* + * function_graph tracer expects ftrace_return_to_handler() to be called + * on the way back to parent. For this purpose, this function is called + * in _mcount() or ftrace_caller() to replace return address (*parent) on + * the call stack to return_to_handler. + * + * Note that @frame_pointer is used only for sanity check later. + */ +void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr, + unsigned long frame_pointer) +{ + unsigned long return_hooker = (unsigned long)&return_to_handler; + unsigned long old; + struct ftrace_graph_ent trace; + int err; + + if (unlikely(atomic_read(¤t->tracing_graph_pause))) + return; + + /* + * Note: + * No protection against faulting at *parent, which may be seen + * on other archs. It's unlikely on AArch64. + */ + old = *parent; + *parent = return_hooker; + + trace.func = self_addr; + trace.depth = current->curr_ret_stack + 1; + + /* Only trace if the calling function expects to */ + if (!ftrace_graph_entry(&trace)) { + *parent = old; + return; + } + + err = ftrace_push_return_trace(old, self_addr, &trace.depth, + frame_pointer); + if (err == -EBUSY) { + *parent = old; + return; + } +} +#endif /* CONFIG_FUNCTION_GRAPH_TRACER */ -- cgit v1.2.3 From bd7d38dbdf356e75eb3b1699158c9b8021fd6784 Mon Sep 17 00:00:00 2001 From: AKASHI Takahiro Date: Wed, 30 Apr 2014 10:54:34 +0100 Subject: arm64: ftrace: Add dynamic ftrace support This patch allows "dynamic ftrace" if CONFIG_DYNAMIC_FTRACE is enabled. Here we can turn on and off tracing dynamically per-function base. On arm64, this is done by patching single branch instruction to _mcount() inserted by gcc -pg option. The branch is replaced to NOP initially at kernel start up, and later on, NOP to branch to ftrace_caller() when enabled or branch to NOP when disabled. Please note that ftrace_caller() is a counterpart of _mcount() in case of 'static' ftrace. More details on architecture specific requirements are described in Documentation/trace/ftrace-design.txt. Acked-by: Will Deacon Signed-off-by: AKASHI Takahiro Signed-off-by: Will Deacon --- arch/arm64/Kconfig | 1 + arch/arm64/include/asm/ftrace.h | 15 ++++++ arch/arm64/kernel/entry-ftrace.S | 43 +++++++++++++++ arch/arm64/kernel/ftrace.c | 112 +++++++++++++++++++++++++++++++++++++++ 4 files changed, 171 insertions(+) diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig index 8a25a4ad3159..4e689ad5f27c 100644 --- a/arch/arm64/Kconfig +++ b/arch/arm64/Kconfig @@ -36,6 +36,7 @@ config ARM64 select HAVE_DMA_API_DEBUG select HAVE_DMA_ATTRS select HAVE_DMA_CONTIGUOUS + select HAVE_DYNAMIC_FTRACE select HAVE_EFFICIENT_UNALIGNED_ACCESS select HAVE_FTRACE_MCOUNT_RECORD select HAVE_FUNCTION_TRACER diff --git a/arch/arm64/include/asm/ftrace.h b/arch/arm64/include/asm/ftrace.h index 58ea5951b198..ed5c448ece99 100644 --- a/arch/arm64/include/asm/ftrace.h +++ b/arch/arm64/include/asm/ftrace.h @@ -18,6 +18,21 @@ #ifndef __ASSEMBLY__ extern void _mcount(unsigned long); + +struct dyn_arch_ftrace { + /* No extra data needed for arm64 */ +}; + +extern unsigned long ftrace_graph_call; + +static inline unsigned long ftrace_call_adjust(unsigned long addr) +{ + /* + * addr is the address of the mcount call instruction. + * recordmcount does the necessary offset calculation. + */ + return addr; +} #endif /* __ASSEMBLY__ */ #endif /* __ASM_FTRACE_H */ diff --git a/arch/arm64/kernel/entry-ftrace.S b/arch/arm64/kernel/entry-ftrace.S index b2d8c4559cd8..b051871f2965 100644 --- a/arch/arm64/kernel/entry-ftrace.S +++ b/arch/arm64/kernel/entry-ftrace.S @@ -86,6 +86,7 @@ add \reg, \reg, #8 .endm +#ifndef CONFIG_DYNAMIC_FTRACE /* * void _mcount(unsigned long return_address) * @return_address: return address to instrumented function @@ -134,6 +135,48 @@ skip_ftrace_call: #endif /* CONFIG_FUNCTION_GRAPH_TRACER */ ENDPROC(_mcount) +#else /* CONFIG_DYNAMIC_FTRACE */ +/* + * _mcount() is used to build the kernel with -pg option, but all the branch + * instructions to _mcount() are replaced to NOP initially at kernel start up, + * and later on, NOP to branch to ftrace_caller() when enabled or branch to + * NOP when disabled per-function base. + */ +ENTRY(_mcount) + ret +ENDPROC(_mcount) + +/* + * void ftrace_caller(unsigned long return_address) + * @return_address: return address to instrumented function + * + * This function is a counterpart of _mcount() in 'static' ftrace, and + * makes calls to: + * - tracer function to probe instrumented function's entry, + * - ftrace_graph_caller to set up an exit hook + */ +ENTRY(ftrace_caller) + mcount_enter + + mcount_get_pc0 x0 // function's pc + mcount_get_lr x1 // function's lr + + .global ftrace_call +ftrace_call: // tracer(pc, lr); + nop // This will be replaced with "bl xxx" + // where xxx can be any kind of tracer. + +#ifdef CONFIG_FUNCTION_GRAPH_TRACER + .global ftrace_graph_call +ftrace_graph_call: // ftrace_graph_caller(); + nop // If enabled, this will be replaced + // "b ftrace_graph_caller" +#endif + + mcount_exit +ENDPROC(ftrace_caller) +#endif /* CONFIG_DYNAMIC_FTRACE */ + ENTRY(ftrace_stub) ret ENDPROC(ftrace_stub) diff --git a/arch/arm64/kernel/ftrace.c b/arch/arm64/kernel/ftrace.c index a559ab86999b..7924d73b6476 100644 --- a/arch/arm64/kernel/ftrace.c +++ b/arch/arm64/kernel/ftrace.c @@ -17,6 +17,87 @@ #include #include +#ifdef CONFIG_DYNAMIC_FTRACE +/* + * Replace a single instruction, which may be a branch or NOP. + * If @validate == true, a replaced instruction is checked against 'old'. + */ +static int ftrace_modify_code(unsigned long pc, u32 old, u32 new, + bool validate) +{ + u32 replaced; + + /* + * Note: + * Due to modules and __init, code can disappear and change, + * we need to protect against faulting as well as code changing. + * We do this by aarch64_insn_*() which use the probe_kernel_*(). + * + * No lock is held here because all the modifications are run + * through stop_machine(). + */ + if (validate) { + if (aarch64_insn_read((void *)pc, &replaced)) + return -EFAULT; + + if (replaced != old) + return -EINVAL; + } + if (aarch64_insn_patch_text_nosync((void *)pc, new)) + return -EPERM; + + return 0; +} + +/* + * Replace tracer function in ftrace_caller() + */ +int ftrace_update_ftrace_func(ftrace_func_t func) +{ + unsigned long pc; + u32 new; + + pc = (unsigned long)&ftrace_call; + new = aarch64_insn_gen_branch_imm(pc, (unsigned long)func, true); + + return ftrace_modify_code(pc, 0, new, false); +} + +/* + * Turn on the call to ftrace_caller() in instrumented function + */ +int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr) +{ + unsigned long pc = rec->ip; + u32 old, new; + + old = aarch64_insn_gen_nop(); + new = aarch64_insn_gen_branch_imm(pc, addr, true); + + return ftrace_modify_code(pc, old, new, true); +} + +/* + * Turn off the call to ftrace_caller() in instrumented function + */ +int ftrace_make_nop(struct module *mod, struct dyn_ftrace *rec, + unsigned long addr) +{ + unsigned long pc = rec->ip; + u32 old, new; + + old = aarch64_insn_gen_branch_imm(pc, addr, true); + new = aarch64_insn_gen_nop(); + + return ftrace_modify_code(pc, old, new, true); +} + +int __init ftrace_dyn_arch_init(void) +{ + return 0; +} +#endif /* CONFIG_DYNAMIC_FTRACE */ + #ifdef CONFIG_FUNCTION_GRAPH_TRACER /* * function_graph tracer expects ftrace_return_to_handler() to be called @@ -61,4 +142,35 @@ void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr, return; } } + +#ifdef CONFIG_DYNAMIC_FTRACE +/* + * Turn on/off the call to ftrace_graph_caller() in ftrace_caller() + * depending on @enable. + */ +static int ftrace_modify_graph_caller(bool enable) +{ + unsigned long pc = (unsigned long)&ftrace_graph_call; + u32 branch, nop; + + branch = aarch64_insn_gen_branch_imm(pc, + (unsigned long)ftrace_graph_caller, false); + nop = aarch64_insn_gen_nop(); + + if (enable) + return ftrace_modify_code(pc, nop, branch, true); + else + return ftrace_modify_code(pc, branch, nop, true); +} + +int ftrace_enable_ftrace_graph_caller(void) +{ + return ftrace_modify_graph_caller(true); +} + +int ftrace_disable_ftrace_graph_caller(void) +{ + return ftrace_modify_graph_caller(false); +} +#endif /* CONFIG_DYNAMIC_FTRACE */ #endif /* CONFIG_FUNCTION_GRAPH_TRACER */ -- cgit v1.2.3 From 3711784ece66d39352a0dbb6da40e097a77da057 Mon Sep 17 00:00:00 2001 From: AKASHI Takahiro Date: Wed, 30 Apr 2014 10:54:35 +0100 Subject: arm64: ftrace: Add CALLER_ADDRx macros CALLER_ADDRx returns caller's address at specified level in call stacks. They are used for several tracers like irqsoff and preemptoff. Strange to say, however, they are refered even without FTRACE. Signed-off-by: AKASHI Takahiro Signed-off-by: Will Deacon --- arch/arm64/include/asm/ftrace.h | 5 +++- arch/arm64/kernel/Makefile | 3 ++- arch/arm64/kernel/return_address.c | 55 ++++++++++++++++++++++++++++++++++++++ 3 files changed, 61 insertions(+), 2 deletions(-) create mode 100644 arch/arm64/kernel/return_address.c diff --git a/arch/arm64/include/asm/ftrace.h b/arch/arm64/include/asm/ftrace.h index ed5c448ece99..41e8670db20f 100644 --- a/arch/arm64/include/asm/ftrace.h +++ b/arch/arm64/include/asm/ftrace.h @@ -18,6 +18,7 @@ #ifndef __ASSEMBLY__ extern void _mcount(unsigned long); +extern void *return_address(unsigned int); struct dyn_arch_ftrace { /* No extra data needed for arm64 */ @@ -33,6 +34,8 @@ static inline unsigned long ftrace_call_adjust(unsigned long addr) */ return addr; } -#endif /* __ASSEMBLY__ */ + +#define ftrace_return_address(n) return_address(n) +#endif /* ifndef __ASSEMBLY__ */ #endif /* __ASM_FTRACE_H */ diff --git a/arch/arm64/kernel/Makefile b/arch/arm64/kernel/Makefile index 1ebcb4c6b5d8..1f4d8913ceb3 100644 --- a/arch/arm64/kernel/Makefile +++ b/arch/arm64/kernel/Makefile @@ -7,12 +7,13 @@ AFLAGS_head.o := -DTEXT_OFFSET=$(TEXT_OFFSET) CFLAGS_REMOVE_ftrace.o = -pg CFLAGS_REMOVE_insn.o = -pg +CFLAGS_REMOVE_return_address.o = -pg # Object file lists. arm64-obj-y := cputable.o debug-monitors.o entry.o irq.o fpsimd.o \ entry-fpsimd.o process.o ptrace.o setup.o signal.o \ sys.o stacktrace.o time.o traps.o io.o vdso.o \ - hyp-stub.o psci.o cpu_ops.o insn.o + hyp-stub.o psci.o cpu_ops.o insn.o return_address.o arm64-obj-$(CONFIG_COMPAT) += sys32.o kuser32.o signal32.o \ sys_compat.o diff --git a/arch/arm64/kernel/return_address.c b/arch/arm64/kernel/return_address.c new file mode 100644 index 000000000000..89102a6ffad5 --- /dev/null +++ b/arch/arm64/kernel/return_address.c @@ -0,0 +1,55 @@ +/* + * arch/arm64/kernel/return_address.c + * + * Copyright (C) 2013 Linaro Limited + * Author: AKASHI Takahiro + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include + +#include + +struct return_address_data { + unsigned int level; + void *addr; +}; + +static int save_return_addr(struct stackframe *frame, void *d) +{ + struct return_address_data *data = d; + + if (!data->level) { + data->addr = (void *)frame->pc; + return 1; + } else { + --data->level; + return 0; + } +} + +void *return_address(unsigned int level) +{ + struct return_address_data data; + struct stackframe frame; + register unsigned long current_sp asm ("sp"); + + data.level = level + 2; + data.addr = NULL; + + frame.fp = (unsigned long)__builtin_frame_address(0); + frame.sp = current_sp; + frame.pc = (unsigned long)return_address; /* dummy */ + + walk_stackframe(&frame, save_return_addr, &data); + + if (!data.level) + return data.addr; + else + return NULL; +} +EXPORT_SYMBOL_GPL(return_address); -- cgit v1.2.3 From 055b1212d141f1f398fca548f8147787c0b6253f Mon Sep 17 00:00:00 2001 From: AKASHI Takahiro Date: Wed, 30 Apr 2014 10:54:36 +0100 Subject: arm64: ftrace: Add system call tracepoint This patch allows system call entry or exit to be traced as ftrace events, ie. sys_enter_*/sys_exit_*, if CONFIG_FTRACE_SYSCALLS is enabled. Those events appear and can be controlled under ${sysfs}/tracing/events/syscalls/ Please note that we can't trace compat system calls here because AArch32 mode does not share the same syscall table with AArch64. Just define ARCH_TRACE_IGNORE_COMPAT_SYSCALLS in order to avoid unexpected results (bogus syscalls reported or even hang-up). Acked-by: Will Deacon Signed-off-by: AKASHI Takahiro Signed-off-by: Will Deacon --- arch/arm64/Kconfig | 1 + arch/arm64/include/asm/ftrace.h | 18 ++++++++++++++++++ arch/arm64/include/asm/syscall.h | 1 + arch/arm64/include/asm/unistd.h | 2 ++ arch/arm64/kernel/ptrace.c | 9 +++++++++ 5 files changed, 31 insertions(+) diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig index 4e689ad5f27c..bceeaf10c9d6 100644 --- a/arch/arm64/Kconfig +++ b/arch/arm64/Kconfig @@ -48,6 +48,7 @@ config ARM64 select HAVE_PERF_EVENTS select HAVE_PERF_REGS select HAVE_PERF_USER_STACK_DUMP + select HAVE_SYSCALL_TRACEPOINTS select IRQ_DOMAIN select MODULES_USE_ELF_RELA select NO_BOOTMEM diff --git a/arch/arm64/include/asm/ftrace.h b/arch/arm64/include/asm/ftrace.h index 41e8670db20f..c5534facf941 100644 --- a/arch/arm64/include/asm/ftrace.h +++ b/arch/arm64/include/asm/ftrace.h @@ -17,6 +17,8 @@ #define MCOUNT_INSN_SIZE AARCH64_INSN_SIZE #ifndef __ASSEMBLY__ +#include + extern void _mcount(unsigned long); extern void *return_address(unsigned int); @@ -36,6 +38,22 @@ static inline unsigned long ftrace_call_adjust(unsigned long addr) } #define ftrace_return_address(n) return_address(n) + +/* + * Because AArch32 mode does not share the same syscall table with AArch64, + * tracing compat syscalls may result in reporting bogus syscalls or even + * hang-up, so just do not trace them. + * See kernel/trace/trace_syscalls.c + * + * x86 code says: + * If the user realy wants these, then they should use the + * raw syscall tracepoints with filtering. + */ +#define ARCH_TRACE_IGNORE_COMPAT_SYSCALLS +static inline bool arch_trace_is_compat_syscall(struct pt_regs *regs) +{ + return is_compat_task(); +} #endif /* ifndef __ASSEMBLY__ */ #endif /* __ASM_FTRACE_H */ diff --git a/arch/arm64/include/asm/syscall.h b/arch/arm64/include/asm/syscall.h index 70ba9d4ee978..383771eb0b87 100644 --- a/arch/arm64/include/asm/syscall.h +++ b/arch/arm64/include/asm/syscall.h @@ -18,6 +18,7 @@ #include +extern const void *sys_call_table[]; static inline int syscall_get_nr(struct task_struct *task, struct pt_regs *regs) diff --git a/arch/arm64/include/asm/unistd.h b/arch/arm64/include/asm/unistd.h index a4654c656a1e..e5f47df00c24 100644 --- a/arch/arm64/include/asm/unistd.h +++ b/arch/arm64/include/asm/unistd.h @@ -29,3 +29,5 @@ #endif #define __ARCH_WANT_SYS_CLONE #include + +#define NR_syscalls (__NR_syscalls) diff --git a/arch/arm64/kernel/ptrace.c b/arch/arm64/kernel/ptrace.c index 32d52d3b079c..3e926b9c0641 100644 --- a/arch/arm64/kernel/ptrace.c +++ b/arch/arm64/kernel/ptrace.c @@ -42,6 +42,9 @@ #include #include +#define CREATE_TRACE_POINTS +#include + /* * TODO: does not yet catch signals sent when the child dies. * in exit.c or in signal.c. @@ -1093,11 +1096,17 @@ asmlinkage int syscall_trace_enter(struct pt_regs *regs) if (test_thread_flag(TIF_SYSCALL_TRACE)) tracehook_report_syscall(regs, PTRACE_SYSCALL_ENTER); + if (test_thread_flag(TIF_SYSCALL_TRACEPOINT)) + trace_sys_enter(regs, regs->syscallno); + return regs->syscallno; } asmlinkage void syscall_trace_exit(struct pt_regs *regs) { + if (test_thread_flag(TIF_SYSCALL_TRACEPOINT)) + trace_sys_exit(regs, regs_return_value(regs)); + if (test_thread_flag(TIF_SYSCALL_TRACE)) tracehook_report_syscall(regs, PTRACE_SYSCALL_EXIT); } -- cgit v1.2.3 From 9358d755bd5cba8965ea79f2a446e689323409f9 Mon Sep 17 00:00:00 2001 From: Lorenzo Pieralisi Date: Thu, 29 May 2014 18:16:54 +0100 Subject: arm64: kernel: initialize broadcast hrtimer based clock event device On platforms implementing CPU power management, the CPUidle subsystem can allow CPUs to enter idle states where local timers logic is lost on power down. To keep the software timers functional the kernel relies on an always-on broadcast timer to be present in the platform to relay the interrupt signalling the timer expiries. For platforms implementing CPU core gating that do not implement an always-on HW timer or implement it in a broken way, this patch adds code to initialize the kernel hrtimer based clock event device upon boot (which can be chosen as tick broadcast device by the kernel). It relies on a dynamically chosen CPU to be always powered-up. This CPU then relays the timer interrupt to CPUs in deep-idle states through its HW local timer device. Having a CPU always-on has implications on power management platform capabilities and makes CPUidle suboptimal, since at least a CPU is kept always in a shallow idle state by the kernel to relay timer interrupts, but at least leaves the kernel with a functional system with some working power management capabilities. The hrtimer based clock event device is unconditionally registered, but has the lowest possible rating such that any broadcast-capable HW clock event device present will be chosen in preference as the tick broadcast device. Reviewed-by: Preeti U Murthy Acked-by: Will Deacon Acked-by: Mark Rutland Signed-off-by: Lorenzo Pieralisi Signed-off-by: Will Deacon --- arch/arm64/kernel/time.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/arm64/kernel/time.c b/arch/arm64/kernel/time.c index 6815987b50f8..1a7125c3099b 100644 --- a/arch/arm64/kernel/time.c +++ b/arch/arm64/kernel/time.c @@ -18,6 +18,7 @@ * along with this program. If not, see . */ +#include #include #include #include @@ -69,6 +70,8 @@ void __init time_init(void) of_clk_init(NULL); clocksource_of_init(); + tick_setup_hrtimer_broadcast(); + arch_timer_rate = arch_timer_get_rate(); if (!arch_timer_rate) panic("Unable to initialise architected timer.\n"); -- cgit v1.2.3