From cf40a310a7aaf1944eea3e01e9c120b31850c3b6 Mon Sep 17 00:00:00 2001 From: Rene Herman Date: Tue, 28 Mar 2006 12:38:20 +0200 Subject: [ALSA] AdLib FM card driver Attached you'll find an ALSA driver for AdLib FM cards. An AdLib card is just an OPL2, which was already supported by sound/drivers/opl3, so only very minimal bus-glue is needed. The patch applies cleanly to both 2.6.16 and 2.6.16-mm1. The driver has been tested with an actual ancient 8-bit ISA AdLib card and works fine. It also works fine for an OPL3 {,emulation} as still found on many ISA soundcards but given that AdLib cards don't have their own mixer, upping the volume from 0 might be a problem without the card driver already loaded and driving the OPL3. Signed-off-by: Takashi Iwai --- Documentation/sound/alsa/ALSA-Configuration.txt | 28 +++++ sound/isa/Kconfig | 9 ++ sound/isa/Makefile | 2 + sound/isa/adlib.c | 161 ++++++++++++++++++++++++ 4 files changed, 200 insertions(+) create mode 100644 sound/isa/adlib.c diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt index a8c3c7e847cf..0ee2c7dfc482 100644 --- a/Documentation/sound/alsa/ALSA-Configuration.txt +++ b/Documentation/sound/alsa/ALSA-Configuration.txt @@ -120,6 +120,34 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. enable - enable card - Default: enabled, for PCI and ISA PnP cards + Module snd-adlib + ---------------- + + Module for AdLib FM cards. + + port - port # for OPL chip + + This module supports multiple cards. It does not support autoprobe, so + the port must be specified. For actual AdLib FM cards it will be 0x388. + Note that this card does not have PCM support and no mixer; only FM + synthesis. + + Make sure you have "sbiload" from the alsa-tools package available and, + after loading the module, find out the assigned ALSA sequencer port + number through "sbiload -l". Example output: + + Port Client name Port name + 64:0 OPL2 FM synth OPL2 FM Port + + Load the std.sb and drums.sb patches also supplied by sbiload: + + sbiload -p 64:0 std.sb drums.sb + + If you use this driver to drive an OPL3, you can use std.o3 and drums.o3 + instead. To have the card produce sound, use aplaymidi from alsa-utils: + + aplaymidi -p 64:0 foo.mid + Module snd-ad1816a ------------------ diff --git a/sound/isa/Kconfig b/sound/isa/Kconfig index 2a1c7334210a..557c4de22960 100644 --- a/sound/isa/Kconfig +++ b/sound/isa/Kconfig @@ -11,6 +11,15 @@ config SND_CS4231_LIB tristate select SND_PCM +config SND_ADLIB + tristate "AdLib FM card" + select SND_OPL3_LIB + help + Say Y here to include support for AdLib FM cards. + + To compile this driver as a module, choose M here: the module + will be called snd-adlib. + config SND_AD1816A tristate "Analog Devices SoundPort AD1816A" depends on SND && PNP && ISA diff --git a/sound/isa/Makefile b/sound/isa/Makefile index 05724eb7bfe4..bb317ccc170f 100644 --- a/sound/isa/Makefile +++ b/sound/isa/Makefile @@ -3,6 +3,7 @@ # Copyright (c) 2001 by Jaroslav Kysela # +snd-adlib-objs := adlib.o snd-als100-objs := als100.o snd-azt2320-objs := azt2320.o snd-cmi8330-objs := cmi8330.o @@ -13,6 +14,7 @@ snd-sgalaxy-objs := sgalaxy.o snd-sscape-objs := sscape.o # Toplevel Module Dependency +obj-$(CONFIG_SND_ADLIB) += snd-adlib.o obj-$(CONFIG_SND_ALS100) += snd-als100.o obj-$(CONFIG_SND_AZT2320) += snd-azt2320.o obj-$(CONFIG_SND_CMI8330) += snd-cmi8330.o diff --git a/sound/isa/adlib.c b/sound/isa/adlib.c new file mode 100644 index 000000000000..a253a14e6a45 --- /dev/null +++ b/sound/isa/adlib.c @@ -0,0 +1,161 @@ +/* + * AdLib FM card driver. + */ + +#include +#include +#include +#include +#include +#include +#include + +#define CRD_NAME "AdLib FM" +#define DRV_NAME "snd_adlib" + +MODULE_DESCRIPTION(CRD_NAME); +MODULE_AUTHOR("Rene Herman"); +MODULE_LICENSE("GPL"); + +static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX; +static char *id[SNDRV_CARDS] = SNDRV_DEFAULT_STR; +static int enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE; +static long port[SNDRV_CARDS] = SNDRV_DEFAULT_PORT; + +module_param_array(index, int, NULL, 0444); +MODULE_PARM_DESC(index, "Index value for " CRD_NAME " soundcard."); +module_param_array(id, charp, NULL, 0444); +MODULE_PARM_DESC(id, "ID string for " CRD_NAME " soundcard."); +module_param_array(enable, bool, NULL, 0444); +MODULE_PARM_DESC(enable, "Enable " CRD_NAME " soundcard."); +module_param_array(port, long, NULL, 0444); +MODULE_PARM_DESC(port, "Port # for " CRD_NAME " driver."); + +static struct platform_device *devices[SNDRV_CARDS]; + +static void snd_adlib_free(struct snd_card *card) +{ + release_and_free_resource(card->private_data); +} + +static int __devinit snd_adlib_probe(struct platform_device *device) +{ + struct snd_card *card; + struct snd_opl3 *opl3; + + int error; + int i = device->id; + + if (port[i] == SNDRV_AUTO_PORT) { + snd_printk(KERN_ERR DRV_NAME ": please specify port\n"); + error = -EINVAL; + goto out0; + } + + card = snd_card_new(index[i], id[i], THIS_MODULE, 0); + if (!card) { + snd_printk(KERN_ERR DRV_NAME ": could not create card\n"); + error = -EINVAL; + goto out0; + } + + card->private_data = request_region(port[i], 4, CRD_NAME); + if (!card->private_data) { + snd_printk(KERN_ERR DRV_NAME ": could not grab ports\n"); + error = -EBUSY; + goto out1; + } + card->private_free = snd_adlib_free; + + error = snd_opl3_create(card, port[i], port[i] + 2, OPL3_HW_AUTO, 1, &opl3); + if (error < 0) { + snd_printk(KERN_ERR DRV_NAME ": could not create OPL\n"); + goto out1; + } + + error = snd_opl3_hwdep_new(opl3, 0, 0, NULL); + if (error < 0) { + snd_printk(KERN_ERR DRV_NAME ": could not create FM\n"); + goto out1; + } + + strcpy(card->driver, DRV_NAME); + strcpy(card->shortname, CRD_NAME); + sprintf(card->longname, CRD_NAME " at %#lx", port[i]); + + snd_card_set_dev(card, &device->dev); + + error = snd_card_register(card); + if (error < 0) { + snd_printk(KERN_ERR DRV_NAME ": could not register card\n"); + goto out1; + } + + platform_set_drvdata(device, card); + return 0; + +out1: snd_card_free(card); + out0: error = -EINVAL; /* FIXME: should be the original error code */ + return error; +} + +static int __devexit snd_adlib_remove(struct platform_device *device) +{ + snd_card_free(platform_get_drvdata(device)); + platform_set_drvdata(device, NULL); + return 0; +} + +static struct platform_driver snd_adlib_driver = { + .probe = snd_adlib_probe, + .remove = __devexit_p(snd_adlib_remove), + + .driver = { + .name = DRV_NAME + } +}; + +static int __init alsa_card_adlib_init(void) +{ + int i, cards; + + if (platform_driver_register(&snd_adlib_driver) < 0) { + snd_printk(KERN_ERR DRV_NAME ": could not register driver\n"); + return -ENODEV; + } + + for (cards = 0, i = 0; i < SNDRV_CARDS; i++) { + struct platform_device *device; + + if (!enable[i]) + continue; + + device = platform_device_register_simple(DRV_NAME, i, NULL, 0); + if (IS_ERR(device)) + continue; + + devices[i] = device; + cards++; + } + + if (!cards) { +#ifdef MODULE + printk(KERN_ERR CRD_NAME " soundcard not found or device busy\n"); +#endif + platform_driver_unregister(&snd_adlib_driver); + return -ENODEV; + } + return 0; +} + +static void __exit alsa_card_adlib_exit(void) +{ + int i; + + for (i = 0; i < SNDRV_CARDS; i++) + platform_device_unregister(devices[i]); + platform_driver_unregister(&snd_adlib_driver); +} + +module_init(alsa_card_adlib_init); +module_exit(alsa_card_adlib_exit); -- cgit v1.2.3