From d3091215921bd4b8fdf3129bf8f733b8ca48dc80 Mon Sep 17 00:00:00 2001 From: "Darrick J. Wong" Date: Fri, 5 Oct 2018 19:11:59 -0400 Subject: docs: move ext4 administrative docs to admin-guide/ Move the ext4 mount option and other administrative stuff to the Linux administrator's guide. Signed-off-by: Darrick J. Wong Signed-off-by: Theodore Ts'o --- Documentation/admin-guide/ext4.rst | 574 +++++++++++++++++++++++++++++++ Documentation/admin-guide/index.rst | 1 + Documentation/conf.py | 2 + Documentation/filesystems/ext4/ext4.rst | 574 ------------------------------- Documentation/filesystems/ext4/index.rst | 1 - 5 files changed, 577 insertions(+), 575 deletions(-) create mode 100644 Documentation/admin-guide/ext4.rst delete mode 100644 Documentation/filesystems/ext4/ext4.rst diff --git a/Documentation/admin-guide/ext4.rst b/Documentation/admin-guide/ext4.rst new file mode 100644 index 000000000000..e506d3dae510 --- /dev/null +++ b/Documentation/admin-guide/ext4.rst @@ -0,0 +1,574 @@ +.. SPDX-License-Identifier: GPL-2.0 + +======================== +ext4 General Information +======================== + +Ext4 is an advanced level of the ext3 filesystem which incorporates +scalability and reliability enhancements for supporting large filesystems +(64 bit) in keeping with increasing disk capacities and state-of-the-art +feature requirements. + +Mailing list: linux-ext4@vger.kernel.org +Web site: http://ext4.wiki.kernel.org + + +Quick usage instructions +======================== + +Note: More extensive information for getting started with ext4 can be +found at the ext4 wiki site at the URL: +http://ext4.wiki.kernel.org/index.php/Ext4_Howto + + - The latest version of e2fsprogs can be found at: + + https://www.kernel.org/pub/linux/kernel/people/tytso/e2fsprogs/ + + or + + http://sourceforge.net/project/showfiles.php?group_id=2406 + + or grab the latest git repository from: + + https://git.kernel.org/pub/scm/fs/ext2/e2fsprogs.git + + - Create a new filesystem using the ext4 filesystem type: + + # mke2fs -t ext4 /dev/hda1 + + Or to configure an existing ext3 filesystem to support extents: + + # tune2fs -O extents /dev/hda1 + + If the filesystem was created with 128 byte inodes, it can be + converted to use 256 byte for greater efficiency via: + + # tune2fs -I 256 /dev/hda1 + + - Mounting: + + # mount -t ext4 /dev/hda1 /wherever + + - When comparing performance with other filesystems, it's always + important to try multiple workloads; very often a subtle change in a + workload parameter can completely change the ranking of which + filesystems do well compared to others. When comparing versus ext3, + note that ext4 enables write barriers by default, while ext3 does + not enable write barriers by default. So it is useful to use + explicitly specify whether barriers are enabled or not when via the + '-o barriers=[0|1]' mount option for both ext3 and ext4 filesystems + for a fair comparison. When tuning ext3 for best benchmark numbers, + it is often worthwhile to try changing the data journaling mode; '-o + data=writeback' can be faster for some workloads. (Note however that + running mounted with data=writeback can potentially leave stale data + exposed in recently written files in case of an unclean shutdown, + which could be a security exposure in some situations.) Configuring + the filesystem with a large journal can also be helpful for + metadata-intensive workloads. + +Features +======== + +Currently Available +------------------- + +* ability to use filesystems > 16TB (e2fsprogs support not available yet) +* extent format reduces metadata overhead (RAM, IO for access, transactions) +* extent format more robust in face of on-disk corruption due to magics, +* internal redundancy in tree +* improved file allocation (multi-block alloc) +* lift 32000 subdirectory limit imposed by i_links_count[1] +* nsec timestamps for mtime, atime, ctime, create time +* inode version field on disk (NFSv4, Lustre) +* reduced e2fsck time via uninit_bg feature +* journal checksumming for robustness, performance +* persistent file preallocation (e.g for streaming media, databases) +* ability to pack bitmaps and inode tables into larger virtual groups via the + flex_bg feature +* large file support +* inode allocation using large virtual block groups via flex_bg +* delayed allocation +* large block (up to pagesize) support +* efficient new ordered mode in JBD2 and ext4 (avoid using buffer head to force + the ordering) + +[1] Filesystems with a block size of 1k may see a limit imposed by the +directory hash tree having a maximum depth of two. + +Options +======= + +When mounting an ext4 filesystem, the following option are accepted: +(*) == default + + ro + Mount filesystem read only. Note that ext4 will replay the journal (and + thus write to the partition) even when mounted "read only". The mount + options "ro,noload" can be used to prevent writes to the filesystem. + + journal_checksum + Enable checksumming of the journal transactions. This will allow the + recovery code in e2fsck and the kernel to detect corruption in the + kernel. It is a compatible change and will be ignored by older + kernels. + + journal_async_commit + Commit block can be written to disk without waiting for descriptor + blocks. If enabled older kernels cannot mount the device. This will + enable 'journal_checksum' internally. + + journal_path=path, journal_dev=devnum + When the external journal device's major/minor numbers have changed, + these options allow the user to specify the new journal location. The + journal device is identified through either its new major/minor numbers + encoded in devnum, or via a path to the device. + + norecovery, noload + Don't load the journal on mounting. Note that if the filesystem was + not unmounted cleanly, skipping the journal replay will lead to the + filesystem containing inconsistencies that can lead to any number of + problems. + + data=journal + All data are committed into the journal prior to being written into the + main file system. Enabling this mode will disable delayed allocation + and O_DIRECT support. + + data=ordered (*) + All data are forced directly out to the main file system prior to its + metadata being committed to the journal. + + data=writeback + Data ordering is not preserved, data may be written into the main file + system after its metadata has been committed to the journal. + + commit=nrsec (*) + Ext4 can be told to sync all its data and metadata every 'nrsec' + seconds. The default value is 5 seconds. This means that if you lose + your power, you will lose as much as the latest 5 seconds of work (your + filesystem will not be damaged though, thanks to the journaling). This + default value (or any low value) will hurt performance, but it's good + for data-safety. Setting it to 0 will have the same effect as leaving + it at the default (5 seconds). Setting it to very large values will + improve performance. + + barrier=<0|1(*)>, barrier(*), nobarrier + This enables/disables the use of write barriers in the jbd code. + barrier=0 disables, barrier=1 enables. This also requires an IO stack + which can support barriers, and if jbd gets an error on a barrier + write, it will disable again with a warning. Write barriers enforce + proper on-disk ordering of journal commits, making volatile disk write + caches safe to use, at some performance penalty. If your disks are + battery-backed in one way or another, disabling barriers may safely + improve performance. The mount options "barrier" and "nobarrier" can + also be used to enable or disable barriers, for consistency with other + ext4 mount options. + + inode_readahead_blks=n + This tuning parameter controls the maximum number of inode table blocks + that ext4's inode table readahead algorithm will pre-read into the + buffer cache. The default value is 32 blocks. + + nouser_xattr + Disables Extended User Attributes. See the attr(5) manual page for + more information about extended attributes. + + noacl + This option disables POSIX Access Control List support. If ACL support + is enabled in the kernel configuration (CONFIG_EXT4_FS_POSIX_ACL), ACL + is enabled by default on mount. See the acl(5) manual page for more + information about acl. + + bsddf (*) + Make 'df' act like BSD. + + minixdf + Make 'df' act like Minix. + + debug + Extra debugging information is sent to syslog. + + abort + Simulate the effects of calling ext4_abort() for debugging purposes. + This is normally used while remounting a filesystem which is already + mounted. + + errors=remount-ro + Remount the filesystem read-only on an error. + + errors=continue + Keep going on a filesystem error. + + errors=panic + Panic and halt the machine if an error occurs. (These mount options + override the errors behavior specified in the superblock, which can be + configured using tune2fs) + + data_err=ignore(*) + Just print an error message if an error occurs in a file data buffer in + ordered mode. + data_err=abort + Abort the journal if an error occurs in a file data buffer in ordered + mode. + + grpid | bsdgroups + New objects have the group ID of their parent. + + nogrpid (*) | sysvgroups + New objects have the group ID of their creator. + + resgid=n + The group ID which may use the reserved blocks. + + resuid=n + The user ID which may use the reserved blocks. + + sb= + Use alternate superblock at this location. + + quota, noquota, grpquota, usrquota + These options are ignored by the filesystem. They are used only by + quota tools to recognize volumes where quota should be turned on. See + documentation in the quota-tools package for more details + (http://sourceforge.net/projects/linuxquota). + + jqfmt=, usrjquota=, grpjquota= + These options tell filesystem details about quota so that quota + information can be properly updated during journal replay. They replace + the above quota options. See documentation in the quota-tools package + for more details (http://sourceforge.net/projects/linuxquota). + + stripe=n + Number of filesystem blocks that mballoc will try to use for allocation + size and alignment. For RAID5/6 systems this should be the number of + data disks * RAID chunk size in file system blocks. + + delalloc (*) + Defer block allocation until just before ext4 writes out the block(s) + in question. This allows ext4 to better allocation decisions more + efficiently. + + nodelalloc + Disable delayed allocation. Blocks are allocated when the data is + copied from userspace to the page cache, either via the write(2) system + call or when an mmap'ed page which was previously unallocated is + written for the first time. + + max_batch_time=usec + Maximum amount of time ext4 should wait for additional filesystem + operations to be batch together with a synchronous write operation. + Since a synchronous write operation is going to force a commit and then + a wait for the I/O complete, it doesn't cost much, and can be a huge + throughput win, we wait for a small amount of time to see if any other + transactions can piggyback on the synchronous write. The algorithm + used is designed to automatically tune for the speed of the disk, by + measuring the amount of time (on average) that it takes to finish + committing a transaction. Call this time the "commit time". If the + time that the transaction has been running is less than the commit + time, ext4 will try sleeping for the commit time to see if other + operations will join the transaction. The commit time is capped by + the max_batch_time, which defaults to 15000us (15ms). This + optimization can be turned off entirely by setting max_batch_time to 0. + + min_batch_time=usec + This parameter sets the commit time (as described above) to be at least + min_batch_time. It defaults to zero microseconds. Increasing this + parameter may improve the throughput of multi-threaded, synchronous + workloads on very fast disks, at the cost of increasing latency. + + journal_ioprio=prio + The I/O priority (from 0 to 7, where 0 is the highest priority) which + should be used for I/O operations submitted by kjournald2 during a + commit operation. This defaults to 3, which is a slightly higher + priority than the default I/O priority. + + auto_da_alloc(*), noauto_da_alloc + Many broken applications don't use fsync() when replacing existing + files via patterns such as fd = open("foo.new")/write(fd,..)/close(fd)/ + rename("foo.new", "foo"), or worse yet, fd = open("foo", + O_TRUNC)/write(fd,..)/close(fd). If auto_da_alloc is enabled, ext4 + will detect the replace-via-rename and replace-via-truncate patterns + and force that any delayed allocation blocks are allocated such that at + the next journal commit, in the default data=ordered mode, the data + blocks of the new file are forced to disk before the rename() operation + is committed. This provides roughly the same level of guarantees as + ext3, and avoids the "zero-length" problem that can happen when a + system crashes before the delayed allocation blocks are forced to disk. + + noinit_itable + Do not initialize any uninitialized inode table blocks in the + background. This feature may be used by installation CD's so that the + install process can complete as quickly as possible; the inode table + initialization process would then be deferred until the next time the + file system is unmounted. + + init_itable=n + The lazy itable init code will wait n times the number of milliseconds + it took to zero out the previous block group's inode table. This + minimizes the impact on the system performance while file system's + inode table is being initialized. + + discard, nodiscard(*) + Controls whether ext4 should issue discard/TRIM commands to the + underlying block device when blocks are freed. This is useful for SSD + devices and sparse/thinly-provisioned LUNs, but it is off by default + until sufficient testing has been done. + + nouid32 + Disables 32-bit UIDs and GIDs. This is for interoperability with + older kernels which only store and expect 16-bit values. + + block_validity(*), noblock_validity + These options enable or disable the in-kernel facility for tracking + filesystem metadata blocks within internal data structures. This + allows multi- block allocator and other routines to notice bugs or + corrupted allocation bitmaps which cause blocks to be allocated which + overlap with filesystem metadata blocks. + + dioread_lock, dioread_nolock + Controls whether or not ext4 should use the DIO read locking. If the + dioread_nolock option is specified ext4 will allocate uninitialized + extent before buffer write and convert the extent to initialized after + IO completes. This approach allows ext4 code to avoid using inode + mutex, which improves scalability on high speed storages. However this + does not work with data journaling and dioread_nolock option will be + ignored with kernel warning. Note that dioread_nolock code path is only + used for extent-based files. Because of the restrictions this options + comprises it is off by default (e.g. dioread_lock). + + max_dir_size_kb=n + This limits the size of directories so that any attempt to expand them + beyond the specified limit in kilobytes will cause an ENOSPC error. + This is useful in memory constrained environments, where a very large + directory can cause severe performance problems or even provoke the Out + Of Memory killer. (For example, if there is only 512mb memory + available, a 176mb directory may seriously cramp the system's style.) + + i_version + Enable 64-bit inode version support. This option is off by default. + + dax + Use direct access (no page cache). See + Documentation/filesystems/dax.txt. Note that this option is + incompatible with data=journal. + +Data Mode +========= +There are 3 different data modes: + +* writeback mode + + In data=writeback mode, ext4 does not journal data at all. This mode provides + a similar level of journaling as that of XFS, JFS, and ReiserFS in its default + mode - metadata journaling. A crash+recovery can cause incorrect data to + appear in files which were written shortly before the crash. This mode will + typically provide the best ext4 performance. + +* ordered mode + + In data=ordered mode, ext4 only officially journals metadata, but it logically + groups metadata information related to data changes with the data blocks into + a single unit called a transaction. When it's time to write the new metadata + out to disk, the associated data blocks are written first. In general, this + mode performs slightly slower than writeback but significantly faster than + journal mode. + +* journal mode + + data=journal mode provides full data and metadata journaling. All new data is + written to the journal first, and then to its final location. In the event of + a crash, the journal can be replayed, bringing both data and metadata into a + consistent state. This mode is the slowest except when data needs to be read + from and written to disk at the same time where it outperforms all others + modes. Enabling this mode will disable delayed allocation and O_DIRECT + support. + +/proc entries +============= + +Information about mounted ext4 file systems can be found in +/proc/fs/ext4. Each mounted filesystem will have a directory in +/proc/fs/ext4 based on its device name (i.e., /proc/fs/ext4/hdc or +/proc/fs/ext4/dm-0). The files in each per-device directory are shown +in table below. + +Files in /proc/fs/ext4/ + + mb_groups + details of multiblock allocator buddy cache of free blocks + +/sys entries +============ + +Information about mounted ext4 file systems can be found in +/sys/fs/ext4. Each mounted filesystem will have a directory in +/sys/fs/ext4 based on its device name (i.e., /sys/fs/ext4/hdc or +/sys/fs/ext4/dm-0). The files in each per-device directory are shown +in table below. + +Files in /sys/fs/ext4/: + +(see also Documentation/ABI/testing/sysfs-fs-ext4) + + delayed_allocation_blocks + This file is read-only and shows the number of blocks that are dirty in + the page cache, but which do not have their location in the filesystem + allocated yet. + + inode_goal + Tuning parameter which (if non-zero) controls the goal inode used by + the inode allocator in preference to all other allocation heuristics. + This is intended for debugging use only, and should be 0 on production + systems. + + inode_readahead_blks + Tuning parameter which controls the maximum number of inode table + blocks that ext4's inode table readahead algorithm will pre-read into + the buffer cache. + + lifetime_write_kbytes + This file is read-only and shows the number of kilobytes of data that + have been written to this filesystem since it was created. + + max_writeback_mb_bump + The maximum number of megabytes the writeback code will try to write + out before move on to another inode. + + mb_group_prealloc + The multiblock allocator will round up allocation requests to a + multiple of this tuning parameter if the stripe size is not set in the + ext4 superblock + + mb_max_to_scan + The maximum number of extents the multiblock allocator will search to + find the best extent. + + mb_min_to_scan + The minimum number of extents the multiblock allocator will search to + find the best extent. + + mb_order2_req + Tuning parameter which controls the minimum size for requests (as a + power of 2) where the buddy cache is used. + + mb_stats + Controls whether the multiblock allocator should collect statistics, + which are shown during the unmount. 1 means to collect statistics, 0 + means not to collect statistics. + + mb_stream_req + Files which have fewer blocks than this tunable parameter will have + their blocks allocated out of a block group specific preallocation + pool, so that small files are packed closely together. Each large file + will have its blocks allocated out of its own unique preallocation + pool. + + session_write_kbytes + This file is read-only and shows the number of kilobytes of data that + have been written to this filesystem since it was mounted. + + reserved_clusters + This is RW file and contains number of reserved clusters in the file + system which will be used in the specific situations to avoid costly + zeroout, unexpected ENOSPC, or possible data loss. The default is 2% or + 4096 clusters, whichever is smaller and this can be changed however it + can never exceed number of clusters in the file system. If there is not + enough space for the reserved space when mounting the file mount will + _not_ fail. + +Ioctls +====== + +There is some Ext4 specific functionality which can be accessed by applications +through the system call interfaces. The list of all Ext4 specific ioctls are +shown in the table below. + +Table of Ext4 specific ioctls + + EXT4_IOC_GETFLAGS + Get additional attributes associated with inode. The ioctl argument is + an integer bitfield, with bit values described in ext4.h. This ioctl is + an alias for FS_IOC_GETFLAGS. + + EXT4_IOC_SETFLAGS + Set additional attributes associated with inode. The ioctl argument is + an integer bitfield, with bit values described in ext4.h. This ioctl is + an alias for FS_IOC_SETFLAGS. + + EXT4_IOC_GETVERSION, EXT4_IOC_GETVERSION_OLD + Get the inode i_generation number stored for each inode. The + i_generation number is normally changed only when new inode is created + and it is particularly useful for network filesystems. The '_OLD' + version of this ioctl is an alias for FS_IOC_GETVERSION. + + EXT4_IOC_SETVERSION, EXT4_IOC_SETVERSION_OLD + Set the inode i_generation number stored for each inode. The '_OLD' + version of this ioctl is an alias for FS_IOC_SETVERSION. + + EXT4_IOC_GROUP_EXTEND + This ioctl has the same purpose as the resize mount option. It allows + to resize filesystem to the end of the last existing block group, + further resize has to be done with resize2fs, either online, or + offline. The argument points to the unsigned logn number representing + the filesystem new block count. + + EXT4_IOC_MOVE_EXT + Move the block extents from orig_fd (the one this ioctl is pointing to) + to the donor_fd (the one specified in move_extent structure passed as + an argument to this ioctl). Then, exchange inode metadata between + orig_fd and donor_fd. This is especially useful for online + defragmentation, because the allocator has the opportunity to allocate + moved blocks better, ideally into one contiguous extent. + + EXT4_IOC_GROUP_ADD + Add a new group descriptor to an existing or new group descriptor + block. The new group descriptor is described by ext4_new_group_input + structure, which is passed as an argument to this ioctl. This is + especially useful in conjunction with EXT4_IOC_GROUP_EXTEND, which + allows online resize of the filesystem to the end of the last existing + block group. Those two ioctls combined is used in userspace online + resize tool (e.g. resize2fs). + + EXT4_IOC_MIGRATE + This ioctl operates on the filesystem itself. It converts (migrates) + ext3 indirect block mapped inode to ext4 extent mapped inode by walking + through indirect block mapping of the original inode and converting + contiguous block ranges into ext4 extents of the temporary inode. Then, + inodes are swapped. This ioctl might help, when migrating from ext3 to + ext4 filesystem, however suggestion is to create fresh ext4 filesystem + and copy data from the backup. Note, that filesystem has to support + extents for this ioctl to work. + + EXT4_IOC_ALLOC_DA_BLKS + Force all of the delay allocated blocks to be allocated to preserve + application-expected ext3 behaviour. Note that this will also start + triggering a write of the data blocks, but this behaviour may change in + the future as it is not necessary and has been done this way only for + sake of simplicity. + + EXT4_IOC_RESIZE_FS + Resize the filesystem to a new size. The number of blocks of resized + filesystem is passed in via 64 bit integer argument. The kernel + allocates bitmaps and inode table, the userspace tool thus just passes + the new number of blocks. + + EXT4_IOC_SWAP_BOOT + Swap i_blocks and associated attributes (like i_blocks, i_size, + i_flags, ...) from the specified inode with inode EXT4_BOOT_LOADER_INO + (#5). This is typically used to store a boot loader in a secure part of + the filesystem, where it can't be changed by a normal user by accident. + The data blocks of the previous boot loader will be associated with the + given inode. + +References +========== + +kernel source: + + +programs: http://e2fsprogs.sourceforge.net/ + +useful links: http://fedoraproject.org/wiki/ext3-devel + http://www.bullopensource.org/ext4/ + http://ext4.wiki.kernel.org/index.php/Main_Page + http://fedoraproject.org/wiki/Features/Ext4 diff --git a/Documentation/admin-guide/index.rst b/Documentation/admin-guide/index.rst index 0873685bab0f..965745d5fb9a 100644 --- a/Documentation/admin-guide/index.rst +++ b/Documentation/admin-guide/index.rst @@ -71,6 +71,7 @@ configure specific aspects of kernel behavior to your liking. java ras bcache + ext4 pm/index thunderbolt LSM/index diff --git a/Documentation/conf.py b/Documentation/conf.py index 05dad6bda787..4d32c01e1e16 100644 --- a/Documentation/conf.py +++ b/Documentation/conf.py @@ -383,6 +383,8 @@ latex_documents = [ 'The kernel development community', 'manual'), ('filesystems/index', 'filesystems.tex', 'Linux Filesystems API', 'The kernel development community', 'manual'), + ('admin-guide/ext4', 'ext4-admin-guide.tex', 'ext4 Administration Guide', + 'ext4 Community', 'manual'), ('filesystems/ext4/index', 'ext4.tex', 'ext4 Filesystem', 'ext4 Filesystem Developers', 'manual'), ('gpu/index', 'gpu.tex', 'Linux GPU Driver Developer\'s Guide', diff --git a/Documentation/filesystems/ext4/ext4.rst b/Documentation/filesystems/ext4/ext4.rst deleted file mode 100644 index e2b6bb7c2730..000000000000 --- a/Documentation/filesystems/ext4/ext4.rst +++ /dev/null @@ -1,574 +0,0 @@ -.. SPDX-License-Identifier: GPL-2.0 - -======================== -General Information -======================== - -Ext4 is an advanced level of the ext3 filesystem which incorporates -scalability and reliability enhancements for supporting large filesystems -(64 bit) in keeping with increasing disk capacities and state-of-the-art -feature requirements. - -Mailing list: linux-ext4@vger.kernel.org -Web site: http://ext4.wiki.kernel.org - - -Quick usage instructions -======================== - -Note: More extensive information for getting started with ext4 can be -found at the ext4 wiki site at the URL: -http://ext4.wiki.kernel.org/index.php/Ext4_Howto - - - The latest version of e2fsprogs can be found at: - - https://www.kernel.org/pub/linux/kernel/people/tytso/e2fsprogs/ - - or - - http://sourceforge.net/project/showfiles.php?group_id=2406 - - or grab the latest git repository from: - - https://git.kernel.org/pub/scm/fs/ext2/e2fsprogs.git - - - Create a new filesystem using the ext4 filesystem type: - - # mke2fs -t ext4 /dev/hda1 - - Or to configure an existing ext3 filesystem to support extents: - - # tune2fs -O extents /dev/hda1 - - If the filesystem was created with 128 byte inodes, it can be - converted to use 256 byte for greater efficiency via: - - # tune2fs -I 256 /dev/hda1 - - - Mounting: - - # mount -t ext4 /dev/hda1 /wherever - - - When comparing performance with other filesystems, it's always - important to try multiple workloads; very often a subtle change in a - workload parameter can completely change the ranking of which - filesystems do well compared to others. When comparing versus ext3, - note that ext4 enables write barriers by default, while ext3 does - not enable write barriers by default. So it is useful to use - explicitly specify whether barriers are enabled or not when via the - '-o barriers=[0|1]' mount option for both ext3 and ext4 filesystems - for a fair comparison. When tuning ext3 for best benchmark numbers, - it is often worthwhile to try changing the data journaling mode; '-o - data=writeback' can be faster for some workloads. (Note however that - running mounted with data=writeback can potentially leave stale data - exposed in recently written files in case of an unclean shutdown, - which could be a security exposure in some situations.) Configuring - the filesystem with a large journal can also be helpful for - metadata-intensive workloads. - -Features -======== - -Currently Available -------------------- - -* ability to use filesystems > 16TB (e2fsprogs support not available yet) -* extent format reduces metadata overhead (RAM, IO for access, transactions) -* extent format more robust in face of on-disk corruption due to magics, -* internal redundancy in tree -* improved file allocation (multi-block alloc) -* lift 32000 subdirectory limit imposed by i_links_count[1] -* nsec timestamps for mtime, atime, ctime, create time -* inode version field on disk (NFSv4, Lustre) -* reduced e2fsck time via uninit_bg feature -* journal checksumming for robustness, performance -* persistent file preallocation (e.g for streaming media, databases) -* ability to pack bitmaps and inode tables into larger virtual groups via the - flex_bg feature -* large file support -* inode allocation using large virtual block groups via flex_bg -* delayed allocation -* large block (up to pagesize) support -* efficient new ordered mode in JBD2 and ext4 (avoid using buffer head to force - the ordering) - -[1] Filesystems with a block size of 1k may see a limit imposed by the -directory hash tree having a maximum depth of two. - -Options -======= - -When mounting an ext4 filesystem, the following option are accepted: -(*) == default - - ro - Mount filesystem read only. Note that ext4 will replay the journal (and - thus write to the partition) even when mounted "read only". The mount - options "ro,noload" can be used to prevent writes to the filesystem. - - journal_checksum - Enable checksumming of the journal transactions. This will allow the - recovery code in e2fsck and the kernel to detect corruption in the - kernel. It is a compatible change and will be ignored by older - kernels. - - journal_async_commit - Commit block can be written to disk without waiting for descriptor - blocks. If enabled older kernels cannot mount the device. This will - enable 'journal_checksum' internally. - - journal_path=path, journal_dev=devnum - When the external journal device's major/minor numbers have changed, - these options allow the user to specify the new journal location. The - journal device is identified through either its new major/minor numbers - encoded in devnum, or via a path to the device. - - norecovery, noload - Don't load the journal on mounting. Note that if the filesystem was - not unmounted cleanly, skipping the journal replay will lead to the - filesystem containing inconsistencies that can lead to any number of - problems. - - data=journal - All data are committed into the journal prior to being written into the - main file system. Enabling this mode will disable delayed allocation - and O_DIRECT support. - - data=ordered (*) - All data are forced directly out to the main file system prior to its - metadata being committed to the journal. - - data=writeback - Data ordering is not preserved, data may be written into the main file - system after its metadata has been committed to the journal. - - commit=nrsec (*) - Ext4 can be told to sync all its data and metadata every 'nrsec' - seconds. The default value is 5 seconds. This means that if you lose - your power, you will lose as much as the latest 5 seconds of work (your - filesystem will not be damaged though, thanks to the journaling). This - default value (or any low value) will hurt performance, but it's good - for data-safety. Setting it to 0 will have the same effect as leaving - it at the default (5 seconds). Setting it to very large values will - improve performance. - - barrier=<0|1(*)>, barrier(*), nobarrier - This enables/disables the use of write barriers in the jbd code. - barrier=0 disables, barrier=1 enables. This also requires an IO stack - which can support barriers, and if jbd gets an error on a barrier - write, it will disable again with a warning. Write barriers enforce - proper on-disk ordering of journal commits, making volatile disk write - caches safe to use, at some performance penalty. If your disks are - battery-backed in one way or another, disabling barriers may safely - improve performance. The mount options "barrier" and "nobarrier" can - also be used to enable or disable barriers, for consistency with other - ext4 mount options. - - inode_readahead_blks=n - This tuning parameter controls the maximum number of inode table blocks - that ext4's inode table readahead algorithm will pre-read into the - buffer cache. The default value is 32 blocks. - - nouser_xattr - Disables Extended User Attributes. See the attr(5) manual page for - more information about extended attributes. - - noacl - This option disables POSIX Access Control List support. If ACL support - is enabled in the kernel configuration (CONFIG_EXT4_FS_POSIX_ACL), ACL - is enabled by default on mount. See the acl(5) manual page for more - information about acl. - - bsddf (*) - Make 'df' act like BSD. - - minixdf - Make 'df' act like Minix. - - debug - Extra debugging information is sent to syslog. - - abort - Simulate the effects of calling ext4_abort() for debugging purposes. - This is normally used while remounting a filesystem which is already - mounted. - - errors=remount-ro - Remount the filesystem read-only on an error. - - errors=continue - Keep going on a filesystem error. - - errors=panic - Panic and halt the machine if an error occurs. (These mount options - override the errors behavior specified in the superblock, which can be - configured using tune2fs) - - data_err=ignore(*) - Just print an error message if an error occurs in a file data buffer in - ordered mode. - data_err=abort - Abort the journal if an error occurs in a file data buffer in ordered - mode. - - grpid | bsdgroups - New objects have the group ID of their parent. - - nogrpid (*) | sysvgroups - New objects have the group ID of their creator. - - resgid=n - The group ID which may use the reserved blocks. - - resuid=n - The user ID which may use the reserved blocks. - - sb= - Use alternate superblock at this location. - - quota, noquota, grpquota, usrquota - These options are ignored by the filesystem. They are used only by - quota tools to recognize volumes where quota should be turned on. See - documentation in the quota-tools package for more details - (http://sourceforge.net/projects/linuxquota). - - jqfmt=, usrjquota=, grpjquota= - These options tell filesystem details about quota so that quota - information can be properly updated during journal replay. They replace - the above quota options. See documentation in the quota-tools package - for more details (http://sourceforge.net/projects/linuxquota). - - stripe=n - Number of filesystem blocks that mballoc will try to use for allocation - size and alignment. For RAID5/6 systems this should be the number of - data disks * RAID chunk size in file system blocks. - - delalloc (*) - Defer block allocation until just before ext4 writes out the block(s) - in question. This allows ext4 to better allocation decisions more - efficiently. - - nodelalloc - Disable delayed allocation. Blocks are allocated when the data is - copied from userspace to the page cache, either via the write(2) system - call or when an mmap'ed page which was previously unallocated is - written for the first time. - - max_batch_time=usec - Maximum amount of time ext4 should wait for additional filesystem - operations to be batch together with a synchronous write operation. - Since a synchronous write operation is going to force a commit and then - a wait for the I/O complete, it doesn't cost much, and can be a huge - throughput win, we wait for a small amount of time to see if any other - transactions can piggyback on the synchronous write. The algorithm - used is designed to automatically tune for the speed of the disk, by - measuring the amount of time (on average) that it takes to finish - committing a transaction. Call this time the "commit time". If the - time that the transaction has been running is less than the commit - time, ext4 will try sleeping for the commit time to see if other - operations will join the transaction. The commit time is capped by - the max_batch_time, which defaults to 15000us (15ms). This - optimization can be turned off entirely by setting max_batch_time to 0. - - min_batch_time=usec - This parameter sets the commit time (as described above) to be at least - min_batch_time. It defaults to zero microseconds. Increasing this - parameter may improve the throughput of multi-threaded, synchronous - workloads on very fast disks, at the cost of increasing latency. - - journal_ioprio=prio - The I/O priority (from 0 to 7, where 0 is the highest priority) which - should be used for I/O operations submitted by kjournald2 during a - commit operation. This defaults to 3, which is a slightly higher - priority than the default I/O priority. - - auto_da_alloc(*), noauto_da_alloc - Many broken applications don't use fsync() when replacing existing - files via patterns such as fd = open("foo.new")/write(fd,..)/close(fd)/ - rename("foo.new", "foo"), or worse yet, fd = open("foo", - O_TRUNC)/write(fd,..)/close(fd). If auto_da_alloc is enabled, ext4 - will detect the replace-via-rename and replace-via-truncate patterns - and force that any delayed allocation blocks are allocated such that at - the next journal commit, in the default data=ordered mode, the data - blocks of the new file are forced to disk before the rename() operation - is committed. This provides roughly the same level of guarantees as - ext3, and avoids the "zero-length" problem that can happen when a - system crashes before the delayed allocation blocks are forced to disk. - - noinit_itable - Do not initialize any uninitialized inode table blocks in the - background. This feature may be used by installation CD's so that the - install process can complete as quickly as possible; the inode table - initialization process would then be deferred until the next time the - file system is unmounted. - - init_itable=n - The lazy itable init code will wait n times the number of milliseconds - it took to zero out the previous block group's inode table. This - minimizes the impact on the system performance while file system's - inode table is being initialized. - - discard, nodiscard(*) - Controls whether ext4 should issue discard/TRIM commands to the - underlying block device when blocks are freed. This is useful for SSD - devices and sparse/thinly-provisioned LUNs, but it is off by default - until sufficient testing has been done. - - nouid32 - Disables 32-bit UIDs and GIDs. This is for interoperability with - older kernels which only store and expect 16-bit values. - - block_validity(*), noblock_validity - These options enable or disable the in-kernel facility for tracking - filesystem metadata blocks within internal data structures. This - allows multi- block allocator and other routines to notice bugs or - corrupted allocation bitmaps which cause blocks to be allocated which - overlap with filesystem metadata blocks. - - dioread_lock, dioread_nolock - Controls whether or not ext4 should use the DIO read locking. If the - dioread_nolock option is specified ext4 will allocate uninitialized - extent before buffer write and convert the extent to initialized after - IO completes. This approach allows ext4 code to avoid using inode - mutex, which improves scalability on high speed storages. However this - does not work with data journaling and dioread_nolock option will be - ignored with kernel warning. Note that dioread_nolock code path is only - used for extent-based files. Because of the restrictions this options - comprises it is off by default (e.g. dioread_lock). - - max_dir_size_kb=n - This limits the size of directories so that any attempt to expand them - beyond the specified limit in kilobytes will cause an ENOSPC error. - This is useful in memory constrained environments, where a very large - directory can cause severe performance problems or even provoke the Out - Of Memory killer. (For example, if there is only 512mb memory - available, a 176mb directory may seriously cramp the system's style.) - - i_version - Enable 64-bit inode version support. This option is off by default. - - dax - Use direct access (no page cache). See - Documentation/filesystems/dax.txt. Note that this option is - incompatible with data=journal. - -Data Mode -========= -There are 3 different data modes: - -* writeback mode - - In data=writeback mode, ext4 does not journal data at all. This mode provides - a similar level of journaling as that of XFS, JFS, and ReiserFS in its default - mode - metadata journaling. A crash+recovery can cause incorrect data to - appear in files which were written shortly before the crash. This mode will - typically provide the best ext4 performance. - -* ordered mode - - In data=ordered mode, ext4 only officially journals metadata, but it logically - groups metadata information related to data changes with the data blocks into - a single unit called a transaction. When it's time to write the new metadata - out to disk, the associated data blocks are written first. In general, this - mode performs slightly slower than writeback but significantly faster than - journal mode. - -* journal mode - - data=journal mode provides full data and metadata journaling. All new data is - written to the journal first, and then to its final location. In the event of - a crash, the journal can be replayed, bringing both data and metadata into a - consistent state. This mode is the slowest except when data needs to be read - from and written to disk at the same time where it outperforms all others - modes. Enabling this mode will disable delayed allocation and O_DIRECT - support. - -/proc entries -============= - -Information about mounted ext4 file systems can be found in -/proc/fs/ext4. Each mounted filesystem will have a directory in -/proc/fs/ext4 based on its device name (i.e., /proc/fs/ext4/hdc or -/proc/fs/ext4/dm-0). The files in each per-device directory are shown -in table below. - -Files in /proc/fs/ext4/ - - mb_groups - details of multiblock allocator buddy cache of free blocks - -/sys entries -============ - -Information about mounted ext4 file systems can be found in -/sys/fs/ext4. Each mounted filesystem will have a directory in -/sys/fs/ext4 based on its device name (i.e., /sys/fs/ext4/hdc or -/sys/fs/ext4/dm-0). The files in each per-device directory are shown -in table below. - -Files in /sys/fs/ext4/: - -(see also Documentation/ABI/testing/sysfs-fs-ext4) - - delayed_allocation_blocks - This file is read-only and shows the number of blocks that are dirty in - the page cache, but which do not have their location in the filesystem - allocated yet. - - inode_goal - Tuning parameter which (if non-zero) controls the goal inode used by - the inode allocator in preference to all other allocation heuristics. - This is intended for debugging use only, and should be 0 on production - systems. - - inode_readahead_blks - Tuning parameter which controls the maximum number of inode table - blocks that ext4's inode table readahead algorithm will pre-read into - the buffer cache. - - lifetime_write_kbytes - This file is read-only and shows the number of kilobytes of data that - have been written to this filesystem since it was created. - - max_writeback_mb_bump - The maximum number of megabytes the writeback code will try to write - out before move on to another inode. - - mb_group_prealloc - The multiblock allocator will round up allocation requests to a - multiple of this tuning parameter if the stripe size is not set in the - ext4 superblock - - mb_max_to_scan - The maximum number of extents the multiblock allocator will search to - find the best extent. - - mb_min_to_scan - The minimum number of extents the multiblock allocator will search to - find the best extent. - - mb_order2_req - Tuning parameter which controls the minimum size for requests (as a - power of 2) where the buddy cache is used. - - mb_stats - Controls whether the multiblock allocator should collect statistics, - which are shown during the unmount. 1 means to collect statistics, 0 - means not to collect statistics. - - mb_stream_req - Files which have fewer blocks than this tunable parameter will have - their blocks allocated out of a block group specific preallocation - pool, so that small files are packed closely together. Each large file - will have its blocks allocated out of its own unique preallocation - pool. - - session_write_kbytes - This file is read-only and shows the number of kilobytes of data that - have been written to this filesystem since it was mounted. - - reserved_clusters - This is RW file and contains number of reserved clusters in the file - system which will be used in the specific situations to avoid costly - zeroout, unexpected ENOSPC, or possible data loss. The default is 2% or - 4096 clusters, whichever is smaller and this can be changed however it - can never exceed number of clusters in the file system. If there is not - enough space for the reserved space when mounting the file mount will - _not_ fail. - -Ioctls -====== - -There is some Ext4 specific functionality which can be accessed by applications -through the system call interfaces. The list of all Ext4 specific ioctls are -shown in the table below. - -Table of Ext4 specific ioctls - - EXT4_IOC_GETFLAGS - Get additional attributes associated with inode. The ioctl argument is - an integer bitfield, with bit values described in ext4.h. This ioctl is - an alias for FS_IOC_GETFLAGS. - - EXT4_IOC_SETFLAGS - Set additional attributes associated with inode. The ioctl argument is - an integer bitfield, with bit values described in ext4.h. This ioctl is - an alias for FS_IOC_SETFLAGS. - - EXT4_IOC_GETVERSION, EXT4_IOC_GETVERSION_OLD - Get the inode i_generation number stored for each inode. The - i_generation number is normally changed only when new inode is created - and it is particularly useful for network filesystems. The '_OLD' - version of this ioctl is an alias for FS_IOC_GETVERSION. - - EXT4_IOC_SETVERSION, EXT4_IOC_SETVERSION_OLD - Set the inode i_generation number stored for each inode. The '_OLD' - version of this ioctl is an alias for FS_IOC_SETVERSION. - - EXT4_IOC_GROUP_EXTEND - This ioctl has the same purpose as the resize mount option. It allows - to resize filesystem to the end of the last existing block group, - further resize has to be done with resize2fs, either online, or - offline. The argument points to the unsigned logn number representing - the filesystem new block count. - - EXT4_IOC_MOVE_EXT - Move the block extents from orig_fd (the one this ioctl is pointing to) - to the donor_fd (the one specified in move_extent structure passed as - an argument to this ioctl). Then, exchange inode metadata between - orig_fd and donor_fd. This is especially useful for online - defragmentation, because the allocator has the opportunity to allocate - moved blocks better, ideally into one contiguous extent. - - EXT4_IOC_GROUP_ADD - Add a new group descriptor to an existing or new group descriptor - block. The new group descriptor is described by ext4_new_group_input - structure, which is passed as an argument to this ioctl. This is - especially useful in conjunction with EXT4_IOC_GROUP_EXTEND, which - allows online resize of the filesystem to the end of the last existing - block group. Those two ioctls combined is used in userspace online - resize tool (e.g. resize2fs). - - EXT4_IOC_MIGRATE - This ioctl operates on the filesystem itself. It converts (migrates) - ext3 indirect block mapped inode to ext4 extent mapped inode by walking - through indirect block mapping of the original inode and converting - contiguous block ranges into ext4 extents of the temporary inode. Then, - inodes are swapped. This ioctl might help, when migrating from ext3 to - ext4 filesystem, however suggestion is to create fresh ext4 filesystem - and copy data from the backup. Note, that filesystem has to support - extents for this ioctl to work. - - EXT4_IOC_ALLOC_DA_BLKS - Force all of the delay allocated blocks to be allocated to preserve - application-expected ext3 behaviour. Note that this will also start - triggering a write of the data blocks, but this behaviour may change in - the future as it is not necessary and has been done this way only for - sake of simplicity. - - EXT4_IOC_RESIZE_FS - Resize the filesystem to a new size. The number of blocks of resized - filesystem is passed in via 64 bit integer argument. The kernel - allocates bitmaps and inode table, the userspace tool thus just passes - the new number of blocks. - - EXT4_IOC_SWAP_BOOT - Swap i_blocks and associated attributes (like i_blocks, i_size, - i_flags, ...) from the specified inode with inode EXT4_BOOT_LOADER_INO - (#5). This is typically used to store a boot loader in a secure part of - the filesystem, where it can't be changed by a normal user by accident. - The data blocks of the previous boot loader will be associated with the - given inode. - -References -========== - -kernel source: - - -programs: http://e2fsprogs.sourceforge.net/ - -useful links: http://fedoraproject.org/wiki/ext3-devel - http://www.bullopensource.org/ext4/ - http://ext4.wiki.kernel.org/index.php/Main_Page - http://fedoraproject.org/wiki/Features/Ext4 diff --git a/Documentation/filesystems/ext4/index.rst b/Documentation/filesystems/ext4/index.rst index 71121605558c..427bc115012e 100644 --- a/Documentation/filesystems/ext4/index.rst +++ b/Documentation/filesystems/ext4/index.rst @@ -13,5 +13,4 @@ the ext4 community. :maxdepth: 5 :numbered: - ext4 ondisk/index -- cgit v1.2.3