From 0f78b2443a654afad7c5efdf0157c80747078682 Mon Sep 17 00:00:00 2001 From: Heiko Stuebner Date: Fri, 27 Jan 2012 16:28:29 +0900 Subject: ARM: S3C24XX: remove unused spi gpio setup functions A grep through the kernel source revealed that neither the config-options nor the defined functions are used anywhere in the kernel. There was also no activity in this regard through the last kernel releases, so it seems this situation will not change in the future. Therefore this patch removes this seemingly dead code. Signed-off-by: Heiko Stuebner Signed-off-by: Kukjin Kim --- arch/arm/mach-s3c2410/include/mach/spi.h | 11 -------- arch/arm/plat-s3c24xx/Kconfig | 20 --------------- arch/arm/plat-s3c24xx/Makefile | 6 ----- arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c | 36 -------------------------- arch/arm/plat-s3c24xx/spi-bus1-gpd8_9_10.c | 38 ---------------------------- arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c | 36 -------------------------- 6 files changed, 147 deletions(-) delete mode 100644 arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c delete mode 100644 arch/arm/plat-s3c24xx/spi-bus1-gpd8_9_10.c delete mode 100644 arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c diff --git a/arch/arm/mach-s3c2410/include/mach/spi.h b/arch/arm/mach-s3c2410/include/mach/spi.h index 4d9588373aa5..2a686c0751ce 100644 --- a/arch/arm/mach-s3c2410/include/mach/spi.h +++ b/arch/arm/mach-s3c2410/include/mach/spi.h @@ -24,15 +24,4 @@ struct s3c2410_spi_info { void (*set_cs)(struct s3c2410_spi_info *spi, int cs, int pol); }; -/* Standard setup / suspend routines for SPI GPIO pins. */ - -extern void s3c24xx_spi_gpiocfg_bus0_gpe11_12_13(struct s3c2410_spi_info *spi, - int enable); - -extern void s3c24xx_spi_gpiocfg_bus1_gpg5_6_7(struct s3c2410_spi_info *spi, - int enable); - -extern void s3c24xx_spi_gpiocfg_bus1_gpd8_9_10(struct s3c2410_spi_info *spi, - int enable); - #endif /* __ASM_ARCH_SPI_H */ diff --git a/arch/arm/plat-s3c24xx/Kconfig b/arch/arm/plat-s3c24xx/Kconfig index d8973ac46bc4..6b1d9184e96c 100644 --- a/arch/arm/plat-s3c24xx/Kconfig +++ b/arch/arm/plat-s3c24xx/Kconfig @@ -98,26 +98,6 @@ config S3C2410_DMA_DEBUG Enable debugging output for the DMA code. This option sends info to the kernel log, at priority KERN_DEBUG. -# SPI default pin configuration code - -config S3C24XX_SPI_BUS0_GPE11_GPE12_GPE13 - bool - help - SPI GPIO configuration code for BUS0 when connected to - GPE11, GPE12 and GPE13. - -config S3C24XX_SPI_BUS1_GPG5_GPG6_GPG7 - bool - help - SPI GPIO configuration code for BUS 1 when connected to - GPG5, GPG6 and GPG7. - -config S3C24XX_SPI_BUS1_GPD8_GPD9_GPD10 - bool - help - SPI GPIO configuration code for BUS 1 when connected to - GPD8, GPD9 and GPD10. - # common code for s3c24xx based machines, such as the SMDKs. # cpu frequency items common between s3c2410 and s3c2440/s3c2442 diff --git a/arch/arm/plat-s3c24xx/Makefile b/arch/arm/plat-s3c24xx/Makefile index b2b01125de66..7cefd7f9d57e 100644 --- a/arch/arm/plat-s3c24xx/Makefile +++ b/arch/arm/plat-s3c24xx/Makefile @@ -38,12 +38,6 @@ obj-$(CONFIG_S3C2410_CPUFREQ_UTILS) += s3c2410-cpufreq-utils.o obj-$(CONFIG_ARCH_S3C2410) += setup-i2c.o obj-$(CONFIG_S3C2410_SETUP_TS) += setup-ts.o -# SPI gpio central GPIO functions - -obj-$(CONFIG_S3C24XX_SPI_BUS0_GPE11_GPE12_GPE13) += spi-bus0-gpe11_12_13.o -obj-$(CONFIG_S3C24XX_SPI_BUS1_GPG5_GPG6_GPG7) += spi-bus1-gpg5_6_7.o -obj-$(CONFIG_S3C24XX_SPI_BUS1_GPD8_GPD9_GPD10) += spi-bus1-gpd8_9_10.o - # machine common support obj-$(CONFIG_MACH_SMDK) += common-smdk.o diff --git a/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c b/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c deleted file mode 100644 index 704175b0573f..000000000000 --- a/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c +++ /dev/null @@ -1,36 +0,0 @@ -/* linux/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c - * - * Copyright (c) 2008 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks - * - * S3C24XX SPI - gpio configuration for bus 0 on gpe11,12,13 - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License. -*/ - -#include -#include - -#include -#include - -void s3c24xx_spi_gpiocfg_bus0_gpe11_12_13(struct s3c2410_spi_info *spi, - int enable) -{ - if (enable) { - s3c_gpio_cfgpin(S3C2410_GPE(13), S3C2410_GPE13_SPICLK0); - s3c_gpio_cfgpin(S3C2410_GPE(12), S3C2410_GPE12_SPIMOSI0); - s3c_gpio_cfgpin(S3C2410_GPE(11), S3C2410_GPE11_SPIMISO0); - s3c2410_gpio_pullup(S3C2410_GPE(11), 0); - s3c2410_gpio_pullup(S3C2410_GPE(13), 0); - } else { - s3c_gpio_cfgpin(S3C2410_GPE(13), S3C2410_GPIO_INPUT); - s3c_gpio_cfgpin(S3C2410_GPE(11), S3C2410_GPIO_INPUT); - s3c_gpio_setpull(S3C2410_GPE(11), S3C_GPIO_PULL_NONE); - s3c_gpio_setpull(S3C2410_GPE(12), S3C_GPIO_PULL_NONE); - s3c_gpio_setpull(S3C2410_GPE(13), S3C_GPIO_PULL_NONE); - } -} diff --git a/arch/arm/plat-s3c24xx/spi-bus1-gpd8_9_10.c b/arch/arm/plat-s3c24xx/spi-bus1-gpd8_9_10.c deleted file mode 100644 index 72457afd6255..000000000000 --- a/arch/arm/plat-s3c24xx/spi-bus1-gpd8_9_10.c +++ /dev/null @@ -1,38 +0,0 @@ -/* linux/arch/arm/plat-s3c24xx/spi-bus0-gpd8_9_10.c - * - * Copyright (c) 2008 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks - * - * S3C24XX SPI - gpio configuration for bus 1 on gpd8,9,10 - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License. -*/ - -#include -#include - -#include -#include - -void s3c24xx_spi_gpiocfg_bus1_gpd8_9_10(struct s3c2410_spi_info *spi, - int enable) -{ - - printk(KERN_INFO "%s(%d)\n", __func__, enable); - if (enable) { - s3c_gpio_cfgpin(S3C2410_GPD(10), S3C2440_GPD10_SPICLK1); - s3c_gpio_cfgpin(S3C2410_GPD(9), S3C2440_GPD9_SPIMOSI1); - s3c_gpio_cfgpin(S3C2410_GPD(8), S3C2440_GPD8_SPIMISO1); - s3c2410_gpio_pullup(S3C2410_GPD(10), 0); - s3c2410_gpio_pullup(S3C2410_GPD(9), 0); - } else { - s3c_gpio_cfgpin(S3C2410_GPD(8), S3C2410_GPIO_INPUT); - s3c_gpio_cfgpin(S3C2410_GPD(9), S3C2410_GPIO_INPUT); - s3c_gpio_setpull(S3C2410_GPD(10), S3C_GPIO_PULL_NONE); - s3c_gpio_setpull(S3C2410_GPD(9), S3C_GPIO_PULL_NONE); - s3c_gpio_setpull(S3C2410_GPD(8), S3C_GPIO_PULL_NONE); - } -} diff --git a/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c b/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c deleted file mode 100644 index c3972b645d13..000000000000 --- a/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c +++ /dev/null @@ -1,36 +0,0 @@ -/* linux/arch/arm/plat-s3c24xx/spi-bus0-gpg5_6_7.c - * - * Copyright (c) 2008 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks - * - * S3C24XX SPI - gpio configuration for bus 1 on gpg5,6,7 - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License. -*/ - -#include -#include - -#include -#include - -void s3c24xx_spi_gpiocfg_bus1_gpg5_6_7(struct s3c2410_spi_info *spi, - int enable) -{ - if (enable) { - s3c_gpio_cfgpin(S3C2410_GPG(7), S3C2410_GPG7_SPICLK1); - s3c_gpio_cfgpin(S3C2410_GPG(6), S3C2410_GPG6_SPIMOSI1); - s3c_gpio_cfgpin(S3C2410_GPG(5), S3C2410_GPG5_SPIMISO1); - s3c2410_gpio_pullup(S3C2410_GPG(5), 0); - s3c2410_gpio_pullup(S3C2410_GPG(6), 0); - } else { - s3c_gpio_cfgpin(S3C2410_GPG(7), S3C2410_GPIO_INPUT); - s3c_gpio_cfgpin(S3C2410_GPG(5), S3C2410_GPIO_INPUT); - s3c_gpio_setpull(S3C2410_GPG(5), S3C_GPIO_PULL_NONE); - s3c_gpio_setpull(S3C2410_GPG(6), S3C_GPIO_PULL_NONE); - s3c_gpio_setpull(S3C2410_GPG(7), S3C_GPIO_PULL_NONE); - } -} -- cgit v1.2.3 From f35ef7cab2db0a8b577bef59122b59220efdac44 Mon Sep 17 00:00:00 2001 From: Heiko Stuebner Date: Tue, 31 Jan 2012 20:06:07 +0900 Subject: ARM: S3C24XX: move spi-s3c24xx platdata out of mach spi.h now only contains the definition of the platform data structure for the driver in spi-s3c24xx.c . Therefore it does not need to stay in include/mach but can instead live in linux/spi/s3c24xx.h . Signed-off-by: Heiko Stuebner Cc: Grant Likely Signed-off-by: Kukjin Kim --- arch/arm/mach-s3c2410/include/mach/spi.h | 27 --------------------------- arch/arm/mach-s3c2440/mach-gta02.c | 2 +- drivers/spi/spi-s3c24xx.c | 2 +- include/linux/spi/s3c24xx.h | 26 ++++++++++++++++++++++++++ 4 files changed, 28 insertions(+), 29 deletions(-) delete mode 100644 arch/arm/mach-s3c2410/include/mach/spi.h create mode 100644 include/linux/spi/s3c24xx.h diff --git a/arch/arm/mach-s3c2410/include/mach/spi.h b/arch/arm/mach-s3c2410/include/mach/spi.h deleted file mode 100644 index 2a686c0751ce..000000000000 --- a/arch/arm/mach-s3c2410/include/mach/spi.h +++ /dev/null @@ -1,27 +0,0 @@ -/* arch/arm/mach-s3c2410/include/mach/spi.h - * - * Copyright (c) 2006 Simtec Electronics - * Ben Dooks - * - * S3C2410 - SPI Controller platform_device info - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_SPI_H -#define __ASM_ARCH_SPI_H __FILE__ - -struct s3c2410_spi_info { - int pin_cs; /* simple gpio cs */ - unsigned int num_cs; /* total chipselects */ - int bus_num; /* bus number to use. */ - - unsigned int use_fiq:1; /* use fiq */ - - void (*gpio_setup)(struct s3c2410_spi_info *spi, int enable); - void (*set_cs)(struct s3c2410_spi_info *spi, int cs, int pol); -}; - -#endif /* __ASM_ARCH_SPI_H */ diff --git a/arch/arm/mach-s3c2440/mach-gta02.c b/arch/arm/mach-s3c2440/mach-gta02.c index 5859e609d28c..cf270f51d149 100644 --- a/arch/arm/mach-s3c2440/mach-gta02.c +++ b/arch/arm/mach-s3c2440/mach-gta02.c @@ -38,6 +38,7 @@ #include #include #include +#include #include @@ -73,7 +74,6 @@ #include #include -#include #include #include #include diff --git a/drivers/spi/spi-s3c24xx.c b/drivers/spi/spi-s3c24xx.c index fc064535f4fc..8ee7d790ce49 100644 --- a/drivers/spi/spi-s3c24xx.c +++ b/drivers/spi/spi-s3c24xx.c @@ -24,10 +24,10 @@ #include #include +#include #include #include -#include #include #include diff --git a/include/linux/spi/s3c24xx.h b/include/linux/spi/s3c24xx.h new file mode 100644 index 000000000000..c23b923e493b --- /dev/null +++ b/include/linux/spi/s3c24xx.h @@ -0,0 +1,26 @@ +/* + * Copyright (c) 2006 Simtec Electronics + * Ben Dooks + * + * S3C2410 - SPI Controller platform_device info + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __LINUX_SPI_S3C24XX_H +#define __LINUX_SPI_S3C24XX_H __FILE__ + +struct s3c2410_spi_info { + int pin_cs; /* simple gpio cs */ + unsigned int num_cs; /* total chipselects */ + int bus_num; /* bus number to use. */ + + unsigned int use_fiq:1; /* use fiq */ + + void (*gpio_setup)(struct s3c2410_spi_info *spi, int enable); + void (*set_cs)(struct s3c2410_spi_info *spi, int cs, int pol); +}; + +#endif /* __LINUX_SPI_S3C24XX_H */ -- cgit v1.2.3 From 37892ff4e4760c675127827e48019438bb33da08 Mon Sep 17 00:00:00 2001 From: Heiko Stuebner Date: Fri, 27 Jan 2012 16:13:15 +0900 Subject: ARM: S3C24XX: Remove extern declaration of clk_msysclk clk_msysclk is not needed outside of s3c2443-clock.c. Removing the extern declaration will prevent conflicts with the s3c2412 clk_msysclk in the following cleanups. Signed-off-by: Heiko Stuebner Signed-off-by: Kukjin Kim --- arch/arm/plat-samsung/include/plat/s3c2443.h | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/arm/plat-samsung/include/plat/s3c2443.h b/arch/arm/plat-samsung/include/plat/s3c2443.h index dce05b43d51c..ffaecb9049c0 100644 --- a/arch/arm/plat-samsung/include/plat/s3c2443.h +++ b/arch/arm/plat-samsung/include/plat/s3c2443.h @@ -51,4 +51,3 @@ extern int s3c2443_clkcon_enable_s(struct clk *clk, int enable); extern struct clksrc_clk clk_epllref; extern struct clksrc_clk clk_esysclk; -extern struct clksrc_clk clk_msysclk; -- cgit v1.2.3 From 4083da3dcd1901394036e81f858abb2257c7c772 Mon Sep 17 00:00:00 2001 From: Heiko Stuebner Date: Fri, 27 Jan 2012 16:16:19 +0900 Subject: ARM: S3C24XX: move common S3C2443 clock definitions to clock.h plat-samsung/clock.h currently keeps all the SoC specific clock declarations except the ones for S3C2443/S3C2416 which were kept in s3c2443.h. This patch moves them out of s3c2443.h to get rid of the header completely later on. Signed-off-by: Heiko Stuebner Signed-off-by: Kukjin Kim --- arch/arm/mach-s3c2416/clock.c | 1 - arch/arm/plat-s3c24xx/s3c2443-clock.c | 1 - arch/arm/plat-samsung/include/plat/clock.h | 17 +++++++++++++++++ arch/arm/plat-samsung/include/plat/s3c2443.h | 19 ------------------- 4 files changed, 17 insertions(+), 21 deletions(-) diff --git a/arch/arm/mach-s3c2416/clock.c b/arch/arm/mach-s3c2416/clock.c index 59f54d1d7f8b..5e36905eb7fc 100644 --- a/arch/arm/mach-s3c2416/clock.c +++ b/arch/arm/mach-s3c2416/clock.c @@ -15,7 +15,6 @@ #include #include -#include #include #include #include diff --git a/arch/arm/plat-s3c24xx/s3c2443-clock.c b/arch/arm/plat-s3c24xx/s3c2443-clock.c index 95e68190d593..363306061c89 100644 --- a/arch/arm/plat-s3c24xx/s3c2443-clock.c +++ b/arch/arm/plat-s3c24xx/s3c2443-clock.c @@ -12,7 +12,6 @@ #include -#include #include #include #include diff --git a/arch/arm/plat-samsung/include/plat/clock.h b/arch/arm/plat-samsung/include/plat/clock.h index 73c66d4d10fa..42bbe3d99539 100644 --- a/arch/arm/plat-samsung/include/plat/clock.h +++ b/arch/arm/plat-samsung/include/plat/clock.h @@ -79,6 +79,10 @@ extern struct clk clk_epll; extern struct clk clk_xtal; extern struct clk clk_ext; +/* S3C2443/S3C2416 specific clocks */ +extern struct clksrc_clk clk_epllref; +extern struct clksrc_clk clk_esysclk; + /* S3C64XX specific clocks */ extern struct clk clk_h2; extern struct clk clk_27m; @@ -116,6 +120,19 @@ extern void s3c2412_setup_clocks(void); extern void s3c244x_setup_clocks(void); extern void s3c2443_setup_clocks(void); +/* S3C2443/S3C2416 specific clock functions */ + +typedef unsigned int (*pll_fn)(unsigned int reg, unsigned int base); + +extern void s3c2443_common_setup_clocks(pll_fn get_mpll); +extern void s3c2443_common_init_clocks(int xtal, pll_fn get_mpll, + unsigned int *divs, int nr_divs, + int divmask); + +extern int s3c2443_clkcon_enable_h(struct clk *clk, int enable); +extern int s3c2443_clkcon_enable_p(struct clk *clk, int enable); +extern int s3c2443_clkcon_enable_s(struct clk *clk, int enable); + /* S3C64XX specific functions and clocks */ extern int s3c64xx_sclk_ctrl(struct clk *clk, int enable); diff --git a/arch/arm/plat-samsung/include/plat/s3c2443.h b/arch/arm/plat-samsung/include/plat/s3c2443.h index ffaecb9049c0..a5b794ff838b 100644 --- a/arch/arm/plat-samsung/include/plat/s3c2443.h +++ b/arch/arm/plat-samsung/include/plat/s3c2443.h @@ -32,22 +32,3 @@ extern void s3c2443_restart(char mode, const char *cmd); #define s3c2443_init NULL #define s3c2443_restart NULL #endif - -/* common code used by s3c2443 and others. - * note, not to be used outside of arch/arm/mach-s3c* */ - -struct clk; /* some files don't need clk.h otherwise */ - -typedef unsigned int (*pll_fn)(unsigned int reg, unsigned int base); - -extern void s3c2443_common_setup_clocks(pll_fn get_mpll); -extern void s3c2443_common_init_clocks(int xtal, pll_fn get_mpll, - unsigned int *divs, int nr_divs, - int divmask); - -extern int s3c2443_clkcon_enable_h(struct clk *clk, int enable); -extern int s3c2443_clkcon_enable_p(struct clk *clk, int enable); -extern int s3c2443_clkcon_enable_s(struct clk *clk, int enable); - -extern struct clksrc_clk clk_epllref; -extern struct clksrc_clk clk_esysclk; -- cgit v1.2.3 From 507164d22357b26ac73411f42765054045ca0b76 Mon Sep 17 00:00:00 2001 From: Heiko Stuebner Date: Fri, 27 Jan 2012 16:22:57 +0900 Subject: ARM: S3C2410: move s3c2410_baseclk_add to clock.h plat-samsung/clock.h currently keeps all the SoC specific clock declarations. As we want to get rid of s3c2410.h altogether, move the s3c2410_baseclk_add there too. Signed-off-by: Heiko Stuebner Signed-off-by: Kukjin Kim --- arch/arm/plat-samsung/include/plat/clock.h | 4 ++++ arch/arm/plat-samsung/include/plat/s3c2410.h | 2 -- 2 files changed, 4 insertions(+), 2 deletions(-) diff --git a/arch/arm/plat-samsung/include/plat/clock.h b/arch/arm/plat-samsung/include/plat/clock.h index 42bbe3d99539..3b5a9dcc29c5 100644 --- a/arch/arm/plat-samsung/include/plat/clock.h +++ b/arch/arm/plat-samsung/include/plat/clock.h @@ -120,6 +120,10 @@ extern void s3c2412_setup_clocks(void); extern void s3c244x_setup_clocks(void); extern void s3c2443_setup_clocks(void); +/* S3C2410 specific clock functions */ + +extern int s3c2410_baseclk_add(void); + /* S3C2443/S3C2416 specific clock functions */ typedef unsigned int (*pll_fn)(unsigned int reg, unsigned int base); diff --git a/arch/arm/plat-samsung/include/plat/s3c2410.h b/arch/arm/plat-samsung/include/plat/s3c2410.h index 3986497dd3f7..55b0e5f51e97 100644 --- a/arch/arm/plat-samsung/include/plat/s3c2410.h +++ b/arch/arm/plat-samsung/include/plat/s3c2410.h @@ -29,5 +29,3 @@ extern void s3c2410_init_clocks(int xtal); #define s3c2410_init NULL #define s3c2410a_init NULL #endif - -extern int s3c2410_baseclk_add(void); -- cgit v1.2.3 From b130d5c29544fe4cedafd35b112d27a06550d844 Mon Sep 17 00:00:00 2001 From: Kukjin Kim Date: Fri, 3 Feb 2012 14:29:23 +0900 Subject: ARM: S3C24XX: change the ARCH_S3C2410 to ARCH_S3C24XX This patch changes the ARCH name to "ARCH_S3C24XX" for Samsung S3C2410, S3C2412, S3C2413, S3C2416, S3C2440, S3C2442, S3C2443, and S3C2450 SoCs so that we can merge the mach-xxx directories and plat-s3c24xx dir. to just one mach-s3c24xx for them. I think this should be sent to upstream via samsung tree because this touches many samsung stuff. Cc: Dmitry Torokhov Cc: Richard Purdie Cc: Chris Ball Cc: David Woodhouse Cc: Alessandro Zummo Cc: Grant Likely Cc: Greg Kroah-Hartman [for the gadget part:] Acked-by: Felipe Balbi [for the framebuffer (video) part:] Acked-by: Florian Tobias Schandinat [For the watchdog-part:] Acked-by: Wim Van Sebroeck Cc: Sangbeom Kim Cc: Liam Girdwood Cc: Mark Brown Cc: Russell King Signed-off-by: Kukjin Kim --- arch/arm/Kconfig | 23 +++++++++++------------ arch/arm/Makefile | 2 +- arch/arm/boot/compressed/head.S | 2 +- arch/arm/configs/mini2440_defconfig | 2 +- arch/arm/configs/s3c2410_defconfig | 2 +- arch/arm/configs/tct_hammer_defconfig | 2 +- arch/arm/mach-s3c2410/Kconfig | 2 +- arch/arm/mach-s3c2412/Kconfig | 4 ++-- arch/arm/mach-s3c2416/Kconfig | 2 +- arch/arm/mach-s3c2443/Kconfig | 2 +- arch/arm/plat-s3c24xx/Kconfig | 6 +++--- arch/arm/plat-s3c24xx/Makefile | 2 +- arch/arm/plat-samsung/Kconfig | 4 ++-- drivers/input/touchscreen/Kconfig | 2 +- drivers/leds/Kconfig | 2 +- drivers/mmc/host/Kconfig | 2 +- drivers/mtd/nand/Kconfig | 2 +- drivers/rtc/Kconfig | 2 +- drivers/spi/Kconfig | 2 +- drivers/usb/Kconfig | 2 +- drivers/usb/gadget/Kconfig | 4 ++-- drivers/usb/host/ohci-hcd.c | 2 +- drivers/video/Kconfig | 2 +- drivers/watchdog/Kconfig | 2 +- sound/soc/samsung/Kconfig | 12 ++++++------ 25 files changed, 45 insertions(+), 46 deletions(-) diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 24626b0419ee..5f1a3ad13167 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -763,22 +763,21 @@ config ARCH_SA1100 help Support for StrongARM 11x0 based boards. -config ARCH_S3C2410 - bool "Samsung S3C2410, S3C2412, S3C2413, S3C2416, S3C2440, S3C2442, S3C2443, S3C2450" +config ARCH_S3C24XX + bool "Samsung S3C24XX SoCs" select GENERIC_GPIO select ARCH_HAS_CPUFREQ select HAVE_CLK select CLKDEV_LOOKUP select ARCH_USES_GETTIMEOFFSET select HAVE_S3C2410_I2C if I2C + select HAVE_S3C_RTC if RTC_CLASS + select HAVE_S3C2410_WATCHDOG if WATCHDOG help - Samsung S3C2410X CPU based systems, such as the Simtec Electronics - BAST (), the IPAQ 1940 or - the Samsung SMDK2410 development board (and derivatives). - - Note, the S3C2416 and the S3C2450 are so close that they even share - the same SoC ID code. This means that there is no separate machine - directory (no arch/arm/mach-s3c2450) as the S3C2416 was first. + Samsung S3C2410, S3C2412, S3C2413, S3C2416, S3C2440, S3C2442, S3C2443 + and S3C2450 SoCs based systems, such as the Simtec Electronics BAST + (), the IPAQ 1940 or the + Samsung SMDK2410 development board (and derivatives). config ARCH_S3C64XX bool "Samsung S3C64XX" @@ -1068,7 +1067,7 @@ source "arch/arm/plat-s5p/Kconfig" source "arch/arm/plat-spear/Kconfig" -if ARCH_S3C2410 +if ARCH_S3C24XX source "arch/arm/mach-s3c2410/Kconfig" source "arch/arm/mach-s3c2412/Kconfig" source "arch/arm/mach-s3c2416/Kconfig" @@ -1590,7 +1589,7 @@ source kernel/Kconfig.preempt config HZ int - default 200 if ARCH_EBSA110 || ARCH_S3C2410 || ARCH_S5P64X0 || \ + default 200 if ARCH_EBSA110 || ARCH_S3C24XX || ARCH_S5P64X0 || \ ARCH_S5PV210 || ARCH_EXYNOS4 default OMAP_32K_TIMER_HZ if ARCH_OMAP && OMAP_32K_TIMER default AT91_TIMER_HZ if ARCH_AT91 @@ -2116,7 +2115,7 @@ config CPU_FREQ_S3C config CPU_FREQ_S3C24XX bool "CPUfreq driver for Samsung S3C24XX series CPUs (EXPERIMENTAL)" - depends on ARCH_S3C2410 && CPU_FREQ && EXPERIMENTAL + depends on ARCH_S3C24XX && CPU_FREQ && EXPERIMENTAL select CPU_FREQ_S3C help This enables the CPUfreq driver for the Samsung S3C24XX family diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 40319d91bb7f..624f76442ab4 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -175,7 +175,7 @@ machine-$(CONFIG_ARCH_PRIMA2) := prima2 machine-$(CONFIG_ARCH_PXA) := pxa machine-$(CONFIG_ARCH_REALVIEW) := realview machine-$(CONFIG_ARCH_RPC) := rpc -machine-$(CONFIG_ARCH_S3C2410) := s3c2410 s3c2412 s3c2416 s3c2440 s3c2443 +machine-$(CONFIG_ARCH_S3C24XX) := s3c2410 s3c2412 s3c2416 s3c2440 s3c2443 machine-$(CONFIG_ARCH_S3C64XX) := s3c64xx machine-$(CONFIG_ARCH_S5P64X0) := s5p64x0 machine-$(CONFIG_ARCH_S5PC100) := s5pc100 diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S index c5d60250d43d..5f6045f1766c 100644 --- a/arch/arm/boot/compressed/head.S +++ b/arch/arm/boot/compressed/head.S @@ -58,7 +58,7 @@ add \rb, \rb, #0x00010000 @ Ser1 #endif .endm -#elif defined(CONFIG_ARCH_S3C2410) +#elif defined(CONFIG_ARCH_S3C24XX) .macro loadsp, rb, tmp mov \rb, #0x50000000 add \rb, \rb, #0x4000 * CONFIG_S3C_LOWLEVEL_UART_PORT diff --git a/arch/arm/configs/mini2440_defconfig b/arch/arm/configs/mini2440_defconfig index 2472a9585834..42da9183acc8 100644 --- a/arch/arm/configs/mini2440_defconfig +++ b/arch/arm/configs/mini2440_defconfig @@ -13,7 +13,7 @@ CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set CONFIG_BLK_DEV_INTEGRITY=y -CONFIG_ARCH_S3C2410=y +CONFIG_ARCH_S3C24XX=y CONFIG_S3C_ADC=y CONFIG_S3C24XX_PWM=y CONFIG_MACH_MINI2440=y diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig index f9096c1b0a65..8746c002a85f 100644 --- a/arch/arm/configs/s3c2410_defconfig +++ b/arch/arm/configs/s3c2410_defconfig @@ -9,7 +9,7 @@ CONFIG_SLAB=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set -CONFIG_ARCH_S3C2410=y +CONFIG_ARCH_S3C24XX=y CONFIG_S3C_BOOT_ERROR_RESET=y CONFIG_S3C_ADC=y CONFIG_S3C24XX_PWM=y diff --git a/arch/arm/configs/tct_hammer_defconfig b/arch/arm/configs/tct_hammer_defconfig index 95c0f0d63db6..1d24f8458bef 100644 --- a/arch/arm/configs/tct_hammer_defconfig +++ b/arch/arm/configs/tct_hammer_defconfig @@ -14,7 +14,7 @@ CONFIG_SLOB=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set -CONFIG_ARCH_S3C2410=y +CONFIG_ARCH_S3C24XX=y CONFIG_MACH_TCT_HAMMER=y CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig index 5261a7ed0999..ce620993bec1 100644 --- a/arch/arm/mach-s3c2410/Kconfig +++ b/arch/arm/mach-s3c2410/Kconfig @@ -4,7 +4,7 @@ config CPU_S3C2410 bool - depends on ARCH_S3C2410 + depends on ARCH_S3C24XX select CPU_ARM920T select S3C2410_CLOCK select CPU_LLSERIAL_S3C2410 diff --git a/arch/arm/mach-s3c2412/Kconfig b/arch/arm/mach-s3c2412/Kconfig index b8b9029e9f2d..41f3327d676b 100644 --- a/arch/arm/mach-s3c2412/Kconfig +++ b/arch/arm/mach-s3c2412/Kconfig @@ -4,7 +4,7 @@ config CPU_S3C2412 bool - depends on ARCH_S3C2410 + depends on ARCH_S3C24XX select CPU_ARM926T select CPU_LLSERIAL_S3C2440 select S3C2412_PM if PM @@ -14,7 +14,7 @@ config CPU_S3C2412 config CPU_S3C2412_ONLY bool - depends on ARCH_S3C2410 && !CPU_S3C2410 && \ + depends on ARCH_S3C24XX && !CPU_S3C2410 && \ !CPU_S3C2416 && !CPU_S3C2440 && !CPU_S3C2442 && \ !CPU_S3C2443 && CPU_S3C2412 default y if CPU_S3C2412 diff --git a/arch/arm/mach-s3c2416/Kconfig b/arch/arm/mach-s3c2416/Kconfig index 84c7b03e5a30..53d5c2bf5437 100644 --- a/arch/arm/mach-s3c2416/Kconfig +++ b/arch/arm/mach-s3c2416/Kconfig @@ -9,7 +9,7 @@ config CPU_S3C2416 bool - depends on ARCH_S3C2410 + depends on ARCH_S3C24XX select CPU_ARM926T select S3C2416_DMA if S3C2410_DMA select CPU_LLSERIAL_S3C2440 diff --git a/arch/arm/mach-s3c2443/Kconfig b/arch/arm/mach-s3c2443/Kconfig index 8814031516ce..793a0fe654b6 100644 --- a/arch/arm/mach-s3c2443/Kconfig +++ b/arch/arm/mach-s3c2443/Kconfig @@ -4,7 +4,7 @@ config CPU_S3C2443 bool - depends on ARCH_S3C2410 + depends on ARCH_S3C24XX select CPU_ARM920T select S3C2443_DMA if S3C2410_DMA select CPU_LLSERIAL_S3C2440 diff --git a/arch/arm/plat-s3c24xx/Kconfig b/arch/arm/plat-s3c24xx/Kconfig index 6b1d9184e96c..5a67eda57bb2 100644 --- a/arch/arm/plat-s3c24xx/Kconfig +++ b/arch/arm/plat-s3c24xx/Kconfig @@ -4,7 +4,7 @@ config PLAT_S3C24XX bool - depends on ARCH_S3C2410 + depends on ARCH_S3C24XX default y select NO_IOPORT select ARCH_REQUIRE_GPIOLIB @@ -84,7 +84,7 @@ config PM_SIMTEC config S3C2410_DMA bool "S3C2410 DMA support" - depends on ARCH_S3C2410 + depends on ARCH_S3C24XX select S3C_DMA help S3C2410 DMA support. This is needed for drivers like sound which @@ -93,7 +93,7 @@ config S3C2410_DMA config S3C2410_DMA_DEBUG bool "S3C2410 DMA support debug" - depends on ARCH_S3C2410 && S3C2410_DMA + depends on ARCH_S3C24XX && S3C2410_DMA help Enable debugging output for the DMA code. This option sends info to the kernel log, at priority KERN_DEBUG. diff --git a/arch/arm/plat-s3c24xx/Makefile b/arch/arm/plat-s3c24xx/Makefile index 7cefd7f9d57e..32bd295f9c86 100644 --- a/arch/arm/plat-s3c24xx/Makefile +++ b/arch/arm/plat-s3c24xx/Makefile @@ -35,7 +35,7 @@ obj-$(CONFIG_S3C2412_IOTIMING) += s3c2412-iotiming.o obj-$(CONFIG_S3C2410_CPUFREQ_UTILS) += s3c2410-cpufreq-utils.o # device specific setup and/or initialisation -obj-$(CONFIG_ARCH_S3C2410) += setup-i2c.o +obj-$(CONFIG_ARCH_S3C24XX) += setup-i2c.o obj-$(CONFIG_S3C2410_SETUP_TS) += setup-ts.o # machine common support diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig index 6a2abe67c8b2..71553f410016 100644 --- a/arch/arm/plat-samsung/Kconfig +++ b/arch/arm/plat-samsung/Kconfig @@ -205,7 +205,7 @@ config S3C_DEV_USB_HSOTG config S3C_DEV_WDT bool - default y if ARCH_S3C2410 + default y if ARCH_S3C24XX help Complie in platform device definition for Watchdog Timer @@ -264,7 +264,7 @@ config SAMSUNG_DEV_KEYPAD config SAMSUNG_DEV_PWM bool - default y if ARCH_S3C2410 + default y if ARCH_S3C24XX help Compile in platform device definition for PWM Timer diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig index 4af2a18eb3ba..b3061684252e 100644 --- a/drivers/input/touchscreen/Kconfig +++ b/drivers/input/touchscreen/Kconfig @@ -215,7 +215,7 @@ config TOUCHSCREEN_FUJITSU config TOUCHSCREEN_S3C2410 tristate "Samsung S3C2410/generic touchscreen input driver" - depends on ARCH_S3C2410 || SAMSUNG_DEV_TS + depends on ARCH_S3C24XX || SAMSUNG_DEV_TS select S3C_ADC help Say Y here if you have the s3c2410 touchscreen. diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig index c957c344233f..2ba64ca7e255 100644 --- a/drivers/leds/Kconfig +++ b/drivers/leds/Kconfig @@ -69,7 +69,7 @@ config LEDS_MIKROTIK_RB532 config LEDS_S3C24XX tristate "LED Support for Samsung S3C24XX GPIO LEDs" depends on LEDS_CLASS - depends on ARCH_S3C2410 + depends on ARCH_S3C24XX help This option enables support for LEDs connected to GPIO lines on Samsung S3C24XX series CPUs, such as the S3C2410 and S3C2440. diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig index cf444b0ca2cc..f31f7cb164f4 100644 --- a/drivers/mmc/host/Kconfig +++ b/drivers/mmc/host/Kconfig @@ -395,7 +395,7 @@ config MMC_SPI config MMC_S3C tristate "Samsung S3C SD/MMC Card Interface support" - depends on ARCH_S3C2410 + depends on ARCH_S3C24XX help This selects a driver for the MCI interface found in Samsung's S3C2410, S3C2412, S3C2440, S3C2442 CPUs. diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig index 31b034b7eba3..92e8559394d4 100644 --- a/drivers/mtd/nand/Kconfig +++ b/drivers/mtd/nand/Kconfig @@ -187,7 +187,7 @@ config MTD_NAND_PPCHAMELEONEVB config MTD_NAND_S3C2410 tristate "NAND Flash support for Samsung S3C SoCs" - depends on ARCH_S3C2410 || ARCH_S3C64XX + depends on ARCH_S3C24XX || ARCH_S3C64XX help This enables the NAND flash controller on the S3C24xx and S3C64xx SoCs diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig index e19a4031f45e..cb7df33d4eb3 100644 --- a/drivers/rtc/Kconfig +++ b/drivers/rtc/Kconfig @@ -748,7 +748,7 @@ config HAVE_S3C_RTC config RTC_DRV_S3C tristate "Samsung S3C series SoC RTC" - depends on ARCH_S3C2410 || ARCH_S3C64XX || HAVE_S3C_RTC + depends on ARCH_S3C64XX || HAVE_S3C_RTC help RTC (Realtime Clock) driver for the clock inbuilt into the Samsung S3C24XX series of SoCs. This can provide periodic diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index 3f9a47ec67dc..e980700a3962 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -281,7 +281,7 @@ config SPI_PXA2XX_PCI config SPI_S3C24XX tristate "Samsung S3C24XX series SPI" - depends on ARCH_S3C2410 && EXPERIMENTAL + depends on ARCH_S3C24XX && EXPERIMENTAL select SPI_BITBANG help SPI driver for Samsung S3C24XX series ARM SoCs diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig index 75823a1abeb6..5bf291353fe9 100644 --- a/drivers/usb/Kconfig +++ b/drivers/usb/Kconfig @@ -37,7 +37,7 @@ config USB_ARCH_HAS_OHCI # ARM: default y if SA1111 default y if ARCH_OMAP - default y if ARCH_S3C2410 + default y if ARCH_S3C24XX default y if PXA27x default y if PXA3xx default y if ARCH_EP93XX diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig index 7ecb68a67411..43a11c1665be 100644 --- a/drivers/usb/gadget/Kconfig +++ b/drivers/usb/gadget/Kconfig @@ -284,7 +284,7 @@ config USB_IMX config USB_S3C2410 tristate "S3C2410 USB Device Controller" - depends on ARCH_S3C2410 + depends on ARCH_S3C24XX help Samsung's S3C2410 is an ARM-4 processor with an integrated full speed USB 1.1 device controller. It has 4 configurable @@ -299,7 +299,7 @@ config USB_S3C2410_DEBUG config USB_S3C_HSUDC tristate "S3C2416, S3C2443 and S3C2450 USB Device Controller" - depends on ARCH_S3C2410 + depends on ARCH_S3C24XX select USB_GADGET_DUALSPEED help Samsung's S3C2416, S3C2443 and S3C2450 is an ARM9 based SoC diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c index 34b9edd86651..f15e08fca68f 100644 --- a/drivers/usb/host/ohci-hcd.c +++ b/drivers/usb/host/ohci-hcd.c @@ -1000,7 +1000,7 @@ MODULE_LICENSE ("GPL"); #define SA1111_DRIVER ohci_hcd_sa1111_driver #endif -#if defined(CONFIG_ARCH_S3C2410) || defined(CONFIG_ARCH_S3C64XX) +#if defined(CONFIG_ARCH_S3C24XX) || defined(CONFIG_ARCH_S3C64XX) #include "ohci-s3c2410.c" #define PLATFORM_DRIVER ohci_hcd_s3c2410_driver #endif diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index 6ca0c407c144..64ad8cc886b2 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig @@ -2061,7 +2061,7 @@ config FB_S3C_DEBUG_REGWRITE config FB_S3C2410 tristate "S3C2410 LCD framebuffer support" - depends on FB && ARCH_S3C2410 + depends on FB && ARCH_S3C24XX select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig index 877b107f77a7..3aa52ba1398a 100644 --- a/drivers/watchdog/Kconfig +++ b/drivers/watchdog/Kconfig @@ -170,7 +170,7 @@ config HAVE_S3C2410_WATCHDOG config S3C2410_WATCHDOG tristate "S3C2410 Watchdog" - depends on ARCH_S3C2410 || HAVE_S3C2410_WATCHDOG + depends on HAVE_S3C2410_WATCHDOG select WATCHDOG_CORE help Watchdog timer block in the Samsung SoCs. This will reboot diff --git a/sound/soc/samsung/Kconfig b/sound/soc/samsung/Kconfig index f3417f2311b8..fe3995ce9b38 100644 --- a/sound/soc/samsung/Kconfig +++ b/sound/soc/samsung/Kconfig @@ -1,8 +1,8 @@ config SND_SOC_SAMSUNG tristate "ASoC support for Samsung" - depends on ARCH_S3C2410 || ARCH_S3C64XX || ARCH_S5PC100 || ARCH_S5PV210 || ARCH_S5P64X0 || ARCH_EXYNOS4 + depends on ARCH_S3C24XX || ARCH_S3C64XX || ARCH_S5PC100 || ARCH_S5PV210 || ARCH_S5P64X0 || ARCH_EXYNOS4 select S3C64XX_DMA if ARCH_S3C64XX - select S3C2410_DMA if ARCH_S3C2410 + select S3C2410_DMA if ARCH_S3C24XX help Say Y or M if you want to add support for codecs attached to the Samsung SoCs' Audio interfaces. You will also need to @@ -84,7 +84,7 @@ config SND_SOC_SAMSUNG_SMDK2443_WM9710 config SND_SOC_SAMSUNG_LN2440SBC_ALC650 tristate "SoC AC97 Audio support for LN2440SBC - ALC650" - depends on SND_SOC_SAMSUNG && ARCH_S3C2410 + depends on SND_SOC_SAMSUNG && ARCH_S3C24XX select S3C2410_DMA select AC97_BUS select SND_SOC_AC97_CODEC @@ -95,7 +95,7 @@ config SND_SOC_SAMSUNG_LN2440SBC_ALC650 config SND_SOC_SAMSUNG_S3C24XX_UDA134X tristate "SoC I2S Audio support UDA134X wired to a S3C24XX" - depends on SND_SOC_SAMSUNG && ARCH_S3C2410 + depends on SND_SOC_SAMSUNG && ARCH_S3C24XX select SND_S3C24XX_I2S select SND_SOC_L3 select SND_SOC_UDA134X @@ -107,14 +107,14 @@ config SND_SOC_SAMSUNG_SIMTEC config SND_SOC_SAMSUNG_SIMTEC_TLV320AIC23 tristate "SoC I2S Audio support for TLV320AIC23 on Simtec boards" - depends on SND_SOC_SAMSUNG && ARCH_S3C2410 + depends on SND_SOC_SAMSUNG && ARCH_S3C24XX select SND_S3C24XX_I2S select SND_SOC_TLV320AIC23 select SND_SOC_SAMSUNG_SIMTEC config SND_SOC_SAMSUNG_SIMTEC_HERMES tristate "SoC I2S Audio support for Simtec Hermes board" - depends on SND_SOC_SAMSUNG && ARCH_S3C2410 + depends on SND_SOC_SAMSUNG && ARCH_S3C24XX select SND_S3C24XX_I2S select SND_SOC_TLV320AIC3X select SND_SOC_SAMSUNG_SIMTEC -- cgit v1.2.3 From 85fd6d63bf2927b9da7ab1b0d46723bfdb13808c Mon Sep 17 00:00:00 2001 From: Kukjin Kim Date: Mon, 6 Feb 2012 09:38:19 +0900 Subject: ARM: S3C2410: move mach-s3c2410/* into mach-s3c24xx/ This patch moves S3C2410 stuff into mach-s3c24xx/ directory so that we can merge the s3c24 series' directories to the just one mach-s3c24xx/ directory. And this patch is including following. - re-ordered alphabetically by option text at Kconfig and Makefile - removed unused option, MACH_N35 - fixed duplcated option name, S3C2410_DMA to S3C24XX_DMA which is in plat-s3c24xx/ Cc: Ben Dooks Cc: Russell King Signed-off-by: Kukjin Kim --- arch/arm/Kconfig | 2 +- arch/arm/Makefile | 2 +- arch/arm/mach-s3c2410/Kconfig | 154 ----- arch/arm/mach-s3c2410/Makefile | 26 - arch/arm/mach-s3c2410/Makefile.boot | 7 - arch/arm/mach-s3c2410/bast-ide.c | 112 --- arch/arm/mach-s3c2410/bast-irq.c | 166 ----- arch/arm/mach-s3c2410/common.h | 17 - arch/arm/mach-s3c2410/dma.c | 185 ----- arch/arm/mach-s3c2410/h1940-bluetooth.c | 157 ----- arch/arm/mach-s3c2410/include/mach/anubis-cpld.h | 25 - arch/arm/mach-s3c2410/include/mach/anubis-irq.h | 21 - arch/arm/mach-s3c2410/include/mach/anubis-map.h | 38 -- arch/arm/mach-s3c2410/include/mach/bast-cpld.h | 53 -- arch/arm/mach-s3c2410/include/mach/bast-irq.h | 29 - arch/arm/mach-s3c2410/include/mach/bast-map.h | 146 ---- arch/arm/mach-s3c2410/include/mach/bast-pmu.h | 40 -- arch/arm/mach-s3c2410/include/mach/debug-macro.S | 101 --- arch/arm/mach-s3c2410/include/mach/dma.h | 210 ------ arch/arm/mach-s3c2410/include/mach/entry-macro.S | 78 --- arch/arm/mach-s3c2410/include/mach/fb.h | 1 - arch/arm/mach-s3c2410/include/mach/gpio-fns.h | 1 - arch/arm/mach-s3c2410/include/mach/gpio-nrs.h | 118 ---- arch/arm/mach-s3c2410/include/mach/gpio-track.h | 33 - arch/arm/mach-s3c2410/include/mach/gpio.h | 35 - arch/arm/mach-s3c2410/include/mach/h1940-latch.h | 43 -- arch/arm/mach-s3c2410/include/mach/h1940.h | 24 - arch/arm/mach-s3c2410/include/mach/hardware.h | 42 -- arch/arm/mach-s3c2410/include/mach/idle.h | 24 - arch/arm/mach-s3c2410/include/mach/io.h | 216 ------ arch/arm/mach-s3c2410/include/mach/irqs.h | 202 ------ arch/arm/mach-s3c2410/include/mach/leds-gpio.h | 28 - arch/arm/mach-s3c2410/include/mach/map.h | 165 ----- arch/arm/mach-s3c2410/include/mach/osiris-cpld.h | 30 - arch/arm/mach-s3c2410/include/mach/osiris-map.h | 42 -- arch/arm/mach-s3c2410/include/mach/otom-map.h | 30 - arch/arm/mach-s3c2410/include/mach/pm-core.h | 67 -- arch/arm/mach-s3c2410/include/mach/regs-clock.h | 166 ----- arch/arm/mach-s3c2410/include/mach/regs-dsc.h | 220 ------ arch/arm/mach-s3c2410/include/mach/regs-gpio.h | 602 ---------------- arch/arm/mach-s3c2410/include/mach/regs-gpioj.h | 70 -- arch/arm/mach-s3c2410/include/mach/regs-irq.h | 53 -- arch/arm/mach-s3c2410/include/mach/regs-lcd.h | 162 ----- arch/arm/mach-s3c2410/include/mach/regs-mem.h | 202 ------ arch/arm/mach-s3c2410/include/mach/regs-power.h | 40 -- .../mach-s3c2410/include/mach/regs-s3c2412-mem.h | 48 -- arch/arm/mach-s3c2410/include/mach/regs-s3c2412.h | 23 - .../mach-s3c2410/include/mach/regs-s3c2416-mem.h | 30 - arch/arm/mach-s3c2410/include/mach/regs-s3c2416.h | 24 - .../mach-s3c2410/include/mach/regs-s3c2443-clock.h | 194 ------ arch/arm/mach-s3c2410/include/mach/regs-sdi.h | 127 ---- arch/arm/mach-s3c2410/include/mach/system.h | 54 -- arch/arm/mach-s3c2410/include/mach/tick.h | 15 - arch/arm/mach-s3c2410/include/mach/timex.h | 24 - arch/arm/mach-s3c2410/include/mach/uncompress.h | 54 -- arch/arm/mach-s3c2410/include/mach/vr1000-cpld.h | 18 - arch/arm/mach-s3c2410/include/mach/vr1000-irq.h | 26 - arch/arm/mach-s3c2410/include/mach/vr1000-map.h | 110 --- arch/arm/mach-s3c2410/mach-amlm5900.c | 247 ------- arch/arm/mach-s3c2410/mach-bast.c | 645 ------------------ arch/arm/mach-s3c2410/mach-h1940.c | 757 --------------------- arch/arm/mach-s3c2410/mach-n30.c | 608 ----------------- arch/arm/mach-s3c2410/mach-otom.c | 127 ---- arch/arm/mach-s3c2410/mach-qt2410.c | 356 ---------- arch/arm/mach-s3c2410/mach-smdk2410.c | 122 ---- arch/arm/mach-s3c2410/mach-tct_hammer.c | 157 ----- arch/arm/mach-s3c2410/mach-vr1000.c | 386 ----------- arch/arm/mach-s3c2410/nor-simtec.c | 87 --- arch/arm/mach-s3c2410/nor-simtec.h | 14 - arch/arm/mach-s3c2410/pm-h1940.S | 33 - arch/arm/mach-s3c2410/pm.c | 180 ----- arch/arm/mach-s3c2410/s3c2410.c | 206 ------ arch/arm/mach-s3c2410/sleep.S | 68 -- arch/arm/mach-s3c2410/usb-simtec.c | 132 ---- arch/arm/mach-s3c2410/usb-simtec.h | 16 - arch/arm/mach-s3c24xx/Kconfig | 165 +++++ arch/arm/mach-s3c24xx/Makefile | 45 ++ arch/arm/mach-s3c24xx/Makefile.boot | 7 + arch/arm/mach-s3c24xx/bast-ide.c | 112 +++ arch/arm/mach-s3c24xx/bast-irq.c | 166 +++++ arch/arm/mach-s3c24xx/common.h | 17 + arch/arm/mach-s3c24xx/dma-s3c2410.c | 185 +++++ arch/arm/mach-s3c24xx/h1940-bluetooth.c | 157 +++++ arch/arm/mach-s3c24xx/include/mach/anubis-cpld.h | 25 + arch/arm/mach-s3c24xx/include/mach/anubis-irq.h | 21 + arch/arm/mach-s3c24xx/include/mach/anubis-map.h | 38 ++ arch/arm/mach-s3c24xx/include/mach/bast-cpld.h | 53 ++ arch/arm/mach-s3c24xx/include/mach/bast-irq.h | 29 + arch/arm/mach-s3c24xx/include/mach/bast-map.h | 146 ++++ arch/arm/mach-s3c24xx/include/mach/bast-pmu.h | 40 ++ arch/arm/mach-s3c24xx/include/mach/debug-macro.S | 101 +++ arch/arm/mach-s3c24xx/include/mach/dma.h | 210 ++++++ arch/arm/mach-s3c24xx/include/mach/entry-macro.S | 78 +++ arch/arm/mach-s3c24xx/include/mach/fb.h | 1 + arch/arm/mach-s3c24xx/include/mach/gpio-fns.h | 1 + arch/arm/mach-s3c24xx/include/mach/gpio-nrs.h | 118 ++++ arch/arm/mach-s3c24xx/include/mach/gpio-track.h | 33 + arch/arm/mach-s3c24xx/include/mach/gpio.h | 35 + arch/arm/mach-s3c24xx/include/mach/h1940-latch.h | 43 ++ arch/arm/mach-s3c24xx/include/mach/h1940.h | 24 + arch/arm/mach-s3c24xx/include/mach/hardware.h | 42 ++ arch/arm/mach-s3c24xx/include/mach/idle.h | 24 + arch/arm/mach-s3c24xx/include/mach/io.h | 216 ++++++ arch/arm/mach-s3c24xx/include/mach/irqs.h | 202 ++++++ arch/arm/mach-s3c24xx/include/mach/leds-gpio.h | 28 + arch/arm/mach-s3c24xx/include/mach/map.h | 165 +++++ arch/arm/mach-s3c24xx/include/mach/osiris-cpld.h | 30 + arch/arm/mach-s3c24xx/include/mach/osiris-map.h | 42 ++ arch/arm/mach-s3c24xx/include/mach/otom-map.h | 30 + arch/arm/mach-s3c24xx/include/mach/pm-core.h | 67 ++ arch/arm/mach-s3c24xx/include/mach/regs-clock.h | 166 +++++ arch/arm/mach-s3c24xx/include/mach/regs-dsc.h | 220 ++++++ arch/arm/mach-s3c24xx/include/mach/regs-gpio.h | 602 ++++++++++++++++ arch/arm/mach-s3c24xx/include/mach/regs-gpioj.h | 70 ++ arch/arm/mach-s3c24xx/include/mach/regs-irq.h | 53 ++ arch/arm/mach-s3c24xx/include/mach/regs-lcd.h | 162 +++++ arch/arm/mach-s3c24xx/include/mach/regs-mem.h | 202 ++++++ arch/arm/mach-s3c24xx/include/mach/regs-power.h | 40 ++ .../mach-s3c24xx/include/mach/regs-s3c2412-mem.h | 48 ++ arch/arm/mach-s3c24xx/include/mach/regs-s3c2412.h | 23 + .../mach-s3c24xx/include/mach/regs-s3c2416-mem.h | 30 + arch/arm/mach-s3c24xx/include/mach/regs-s3c2416.h | 24 + .../mach-s3c24xx/include/mach/regs-s3c2443-clock.h | 194 ++++++ arch/arm/mach-s3c24xx/include/mach/regs-sdi.h | 127 ++++ arch/arm/mach-s3c24xx/include/mach/system.h | 54 ++ arch/arm/mach-s3c24xx/include/mach/tick.h | 15 + arch/arm/mach-s3c24xx/include/mach/timex.h | 24 + arch/arm/mach-s3c24xx/include/mach/uncompress.h | 54 ++ arch/arm/mach-s3c24xx/include/mach/vr1000-cpld.h | 18 + arch/arm/mach-s3c24xx/include/mach/vr1000-irq.h | 26 + arch/arm/mach-s3c24xx/include/mach/vr1000-map.h | 110 +++ arch/arm/mach-s3c24xx/mach-amlm5900.c | 247 +++++++ arch/arm/mach-s3c24xx/mach-bast.c | 645 ++++++++++++++++++ arch/arm/mach-s3c24xx/mach-h1940.c | 757 +++++++++++++++++++++ arch/arm/mach-s3c24xx/mach-n30.c | 608 +++++++++++++++++ arch/arm/mach-s3c24xx/mach-otom.c | 127 ++++ arch/arm/mach-s3c24xx/mach-qt2410.c | 356 ++++++++++ arch/arm/mach-s3c24xx/mach-smdk2410.c | 122 ++++ arch/arm/mach-s3c24xx/mach-tct_hammer.c | 157 +++++ arch/arm/mach-s3c24xx/mach-vr1000.c | 386 +++++++++++ arch/arm/mach-s3c24xx/nor-simtec.c | 87 +++ arch/arm/mach-s3c24xx/nor-simtec.h | 14 + arch/arm/mach-s3c24xx/pm-h1940.S | 33 + arch/arm/mach-s3c24xx/pm-s3c2410.c | 180 +++++ arch/arm/mach-s3c24xx/s3c2410.c | 206 ++++++ arch/arm/mach-s3c24xx/sleep-s3c2410.S | 68 ++ arch/arm/mach-s3c24xx/usb-simtec.c | 132 ++++ arch/arm/mach-s3c24xx/usb-simtec.h | 16 + arch/arm/plat-s3c24xx/Kconfig | 2 +- arch/arm/plat-s3c24xx/Makefile | 2 +- 150 files changed, 9103 insertions(+), 9073 deletions(-) delete mode 100644 arch/arm/mach-s3c2410/Makefile.boot delete mode 100644 arch/arm/mach-s3c2410/bast-ide.c delete mode 100644 arch/arm/mach-s3c2410/bast-irq.c delete mode 100644 arch/arm/mach-s3c2410/common.h delete mode 100644 arch/arm/mach-s3c2410/dma.c delete mode 100644 arch/arm/mach-s3c2410/h1940-bluetooth.c delete mode 100644 arch/arm/mach-s3c2410/include/mach/anubis-cpld.h delete mode 100644 arch/arm/mach-s3c2410/include/mach/anubis-irq.h delete mode 100644 arch/arm/mach-s3c2410/include/mach/anubis-map.h delete mode 100644 arch/arm/mach-s3c2410/include/mach/bast-cpld.h delete mode 100644 arch/arm/mach-s3c2410/include/mach/bast-irq.h delete mode 100644 arch/arm/mach-s3c2410/include/mach/bast-map.h delete mode 100644 arch/arm/mach-s3c2410/include/mach/bast-pmu.h delete mode 100644 arch/arm/mach-s3c2410/include/mach/debug-macro.S delete mode 100644 arch/arm/mach-s3c2410/include/mach/dma.h delete mode 100644 arch/arm/mach-s3c2410/include/mach/entry-macro.S delete mode 100644 arch/arm/mach-s3c2410/include/mach/fb.h delete mode 100644 arch/arm/mach-s3c2410/include/mach/gpio-fns.h delete mode 100644 arch/arm/mach-s3c2410/include/mach/gpio-nrs.h delete mode 100644 arch/arm/mach-s3c2410/include/mach/gpio-track.h delete mode 100644 arch/arm/mach-s3c2410/include/mach/gpio.h delete mode 100644 arch/arm/mach-s3c2410/include/mach/h1940-latch.h delete mode 100644 arch/arm/mach-s3c2410/include/mach/h1940.h delete mode 100644 arch/arm/mach-s3c2410/include/mach/hardware.h delete mode 100644 arch/arm/mach-s3c2410/include/mach/idle.h delete mode 100644 arch/arm/mach-s3c2410/include/mach/io.h delete mode 100644 arch/arm/mach-s3c2410/include/mach/irqs.h delete mode 100644 arch/arm/mach-s3c2410/include/mach/leds-gpio.h delete mode 100644 arch/arm/mach-s3c2410/include/mach/map.h delete mode 100644 arch/arm/mach-s3c2410/include/mach/osiris-cpld.h delete mode 100644 arch/arm/mach-s3c2410/include/mach/osiris-map.h delete mode 100644 arch/arm/mach-s3c2410/include/mach/otom-map.h delete mode 100644 arch/arm/mach-s3c2410/include/mach/pm-core.h delete mode 100644 arch/arm/mach-s3c2410/include/mach/regs-clock.h delete mode 100644 arch/arm/mach-s3c2410/include/mach/regs-dsc.h delete mode 100644 arch/arm/mach-s3c2410/include/mach/regs-gpio.h delete mode 100644 arch/arm/mach-s3c2410/include/mach/regs-gpioj.h delete mode 100644 arch/arm/mach-s3c2410/include/mach/regs-irq.h delete mode 100644 arch/arm/mach-s3c2410/include/mach/regs-lcd.h delete mode 100644 arch/arm/mach-s3c2410/include/mach/regs-mem.h delete mode 100644 arch/arm/mach-s3c2410/include/mach/regs-power.h delete mode 100644 arch/arm/mach-s3c2410/include/mach/regs-s3c2412-mem.h delete mode 100644 arch/arm/mach-s3c2410/include/mach/regs-s3c2412.h delete mode 100644 arch/arm/mach-s3c2410/include/mach/regs-s3c2416-mem.h delete mode 100644 arch/arm/mach-s3c2410/include/mach/regs-s3c2416.h delete mode 100644 arch/arm/mach-s3c2410/include/mach/regs-s3c2443-clock.h delete mode 100644 arch/arm/mach-s3c2410/include/mach/regs-sdi.h delete mode 100644 arch/arm/mach-s3c2410/include/mach/system.h delete mode 100644 arch/arm/mach-s3c2410/include/mach/tick.h delete mode 100644 arch/arm/mach-s3c2410/include/mach/timex.h delete mode 100644 arch/arm/mach-s3c2410/include/mach/uncompress.h delete mode 100644 arch/arm/mach-s3c2410/include/mach/vr1000-cpld.h delete mode 100644 arch/arm/mach-s3c2410/include/mach/vr1000-irq.h delete mode 100644 arch/arm/mach-s3c2410/include/mach/vr1000-map.h delete mode 100644 arch/arm/mach-s3c2410/mach-amlm5900.c delete mode 100644 arch/arm/mach-s3c2410/mach-bast.c delete mode 100644 arch/arm/mach-s3c2410/mach-h1940.c delete mode 100644 arch/arm/mach-s3c2410/mach-n30.c delete mode 100644 arch/arm/mach-s3c2410/mach-otom.c delete mode 100644 arch/arm/mach-s3c2410/mach-qt2410.c delete mode 100644 arch/arm/mach-s3c2410/mach-smdk2410.c delete mode 100644 arch/arm/mach-s3c2410/mach-tct_hammer.c delete mode 100644 arch/arm/mach-s3c2410/mach-vr1000.c delete mode 100644 arch/arm/mach-s3c2410/nor-simtec.c delete mode 100644 arch/arm/mach-s3c2410/nor-simtec.h delete mode 100644 arch/arm/mach-s3c2410/pm-h1940.S delete mode 100644 arch/arm/mach-s3c2410/pm.c delete mode 100644 arch/arm/mach-s3c2410/s3c2410.c delete mode 100644 arch/arm/mach-s3c2410/sleep.S delete mode 100644 arch/arm/mach-s3c2410/usb-simtec.c delete mode 100644 arch/arm/mach-s3c2410/usb-simtec.h create mode 100644 arch/arm/mach-s3c24xx/Kconfig create mode 100644 arch/arm/mach-s3c24xx/Makefile create mode 100644 arch/arm/mach-s3c24xx/Makefile.boot create mode 100644 arch/arm/mach-s3c24xx/bast-ide.c create mode 100644 arch/arm/mach-s3c24xx/bast-irq.c create mode 100644 arch/arm/mach-s3c24xx/common.h create mode 100644 arch/arm/mach-s3c24xx/dma-s3c2410.c create mode 100644 arch/arm/mach-s3c24xx/h1940-bluetooth.c create mode 100644 arch/arm/mach-s3c24xx/include/mach/anubis-cpld.h create mode 100644 arch/arm/mach-s3c24xx/include/mach/anubis-irq.h create mode 100644 arch/arm/mach-s3c24xx/include/mach/anubis-map.h create mode 100644 arch/arm/mach-s3c24xx/include/mach/bast-cpld.h create mode 100644 arch/arm/mach-s3c24xx/include/mach/bast-irq.h create mode 100644 arch/arm/mach-s3c24xx/include/mach/bast-map.h create mode 100644 arch/arm/mach-s3c24xx/include/mach/bast-pmu.h create mode 100644 arch/arm/mach-s3c24xx/include/mach/debug-macro.S create mode 100644 arch/arm/mach-s3c24xx/include/mach/dma.h create mode 100644 arch/arm/mach-s3c24xx/include/mach/entry-macro.S create mode 100644 arch/arm/mach-s3c24xx/include/mach/fb.h create mode 100644 arch/arm/mach-s3c24xx/include/mach/gpio-fns.h create mode 100644 arch/arm/mach-s3c24xx/include/mach/gpio-nrs.h create mode 100644 arch/arm/mach-s3c24xx/include/mach/gpio-track.h create mode 100644 arch/arm/mach-s3c24xx/include/mach/gpio.h create mode 100644 arch/arm/mach-s3c24xx/include/mach/h1940-latch.h create mode 100644 arch/arm/mach-s3c24xx/include/mach/h1940.h create mode 100644 arch/arm/mach-s3c24xx/include/mach/hardware.h create mode 100644 arch/arm/mach-s3c24xx/include/mach/idle.h create mode 100644 arch/arm/mach-s3c24xx/include/mach/io.h create mode 100644 arch/arm/mach-s3c24xx/include/mach/irqs.h create mode 100644 arch/arm/mach-s3c24xx/include/mach/leds-gpio.h create mode 100644 arch/arm/mach-s3c24xx/include/mach/map.h create mode 100644 arch/arm/mach-s3c24xx/include/mach/osiris-cpld.h create mode 100644 arch/arm/mach-s3c24xx/include/mach/osiris-map.h create mode 100644 arch/arm/mach-s3c24xx/include/mach/otom-map.h create mode 100644 arch/arm/mach-s3c24xx/include/mach/pm-core.h create mode 100644 arch/arm/mach-s3c24xx/include/mach/regs-clock.h create mode 100644 arch/arm/mach-s3c24xx/include/mach/regs-dsc.h create mode 100644 arch/arm/mach-s3c24xx/include/mach/regs-gpio.h create mode 100644 arch/arm/mach-s3c24xx/include/mach/regs-gpioj.h create mode 100644 arch/arm/mach-s3c24xx/include/mach/regs-irq.h create mode 100644 arch/arm/mach-s3c24xx/include/mach/regs-lcd.h create mode 100644 arch/arm/mach-s3c24xx/include/mach/regs-mem.h create mode 100644 arch/arm/mach-s3c24xx/include/mach/regs-power.h create mode 100644 arch/arm/mach-s3c24xx/include/mach/regs-s3c2412-mem.h create mode 100644 arch/arm/mach-s3c24xx/include/mach/regs-s3c2412.h create mode 100644 arch/arm/mach-s3c24xx/include/mach/regs-s3c2416-mem.h create mode 100644 arch/arm/mach-s3c24xx/include/mach/regs-s3c2416.h create mode 100644 arch/arm/mach-s3c24xx/include/mach/regs-s3c2443-clock.h create mode 100644 arch/arm/mach-s3c24xx/include/mach/regs-sdi.h create mode 100644 arch/arm/mach-s3c24xx/include/mach/system.h create mode 100644 arch/arm/mach-s3c24xx/include/mach/tick.h create mode 100644 arch/arm/mach-s3c24xx/include/mach/timex.h create mode 100644 arch/arm/mach-s3c24xx/include/mach/uncompress.h create mode 100644 arch/arm/mach-s3c24xx/include/mach/vr1000-cpld.h create mode 100644 arch/arm/mach-s3c24xx/include/mach/vr1000-irq.h create mode 100644 arch/arm/mach-s3c24xx/include/mach/vr1000-map.h create mode 100644 arch/arm/mach-s3c24xx/mach-amlm5900.c create mode 100644 arch/arm/mach-s3c24xx/mach-bast.c create mode 100644 arch/arm/mach-s3c24xx/mach-h1940.c create mode 100644 arch/arm/mach-s3c24xx/mach-n30.c create mode 100644 arch/arm/mach-s3c24xx/mach-otom.c create mode 100644 arch/arm/mach-s3c24xx/mach-qt2410.c create mode 100644 arch/arm/mach-s3c24xx/mach-smdk2410.c create mode 100644 arch/arm/mach-s3c24xx/mach-tct_hammer.c create mode 100644 arch/arm/mach-s3c24xx/mach-vr1000.c create mode 100644 arch/arm/mach-s3c24xx/nor-simtec.c create mode 100644 arch/arm/mach-s3c24xx/nor-simtec.h create mode 100644 arch/arm/mach-s3c24xx/pm-h1940.S create mode 100644 arch/arm/mach-s3c24xx/pm-s3c2410.c create mode 100644 arch/arm/mach-s3c24xx/s3c2410.c create mode 100644 arch/arm/mach-s3c24xx/sleep-s3c2410.S create mode 100644 arch/arm/mach-s3c24xx/usb-simtec.c create mode 100644 arch/arm/mach-s3c24xx/usb-simtec.h diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 5f1a3ad13167..f8044e9495d2 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1067,8 +1067,8 @@ source "arch/arm/plat-s5p/Kconfig" source "arch/arm/plat-spear/Kconfig" +source "arch/arm/mach-s3c24xx/Kconfig" if ARCH_S3C24XX -source "arch/arm/mach-s3c2410/Kconfig" source "arch/arm/mach-s3c2412/Kconfig" source "arch/arm/mach-s3c2416/Kconfig" source "arch/arm/mach-s3c2440/Kconfig" diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 624f76442ab4..59d9df40ca10 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -175,7 +175,7 @@ machine-$(CONFIG_ARCH_PRIMA2) := prima2 machine-$(CONFIG_ARCH_PXA) := pxa machine-$(CONFIG_ARCH_REALVIEW) := realview machine-$(CONFIG_ARCH_RPC) := rpc -machine-$(CONFIG_ARCH_S3C24XX) := s3c2410 s3c2412 s3c2416 s3c2440 s3c2443 +machine-$(CONFIG_ARCH_S3C24XX) := s3c24xx s3c2412 s3c2416 s3c2440 s3c2443 machine-$(CONFIG_ARCH_S3C64XX) := s3c64xx machine-$(CONFIG_ARCH_S5P64X0) := s5p64x0 machine-$(CONFIG_ARCH_S5PC100) := s5pc100 diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig index ce620993bec1..68d89cb96af0 100644 --- a/arch/arm/mach-s3c2410/Kconfig +++ b/arch/arm/mach-s3c2410/Kconfig @@ -2,42 +2,6 @@ # # Licensed under GPLv2 -config CPU_S3C2410 - bool - depends on ARCH_S3C24XX - select CPU_ARM920T - select S3C2410_CLOCK - select CPU_LLSERIAL_S3C2410 - select S3C2410_PM if PM - select S3C2410_CPUFREQ if CPU_FREQ_S3C24XX - help - Support for S3C2410 and S3C2410A family from the S3C24XX line - of Samsung Mobile CPUs. - -config CPU_S3C2410_DMA - bool - depends on S3C2410_DMA && (CPU_S3C2410 || CPU_S3C2442) - default y if CPU_S3C2410 || CPU_S3C2442 - help - DMA device selection for S3C2410 and compatible CPUs - -config S3C2410_PM - bool - help - Power Management code common to S3C2410 and better - -config SIMTEC_NOR - bool - help - Internal node to specify machine has simtec NOR mapping - -config MACH_BAST_IDE - bool - select HAVE_PATA_PLATFORM - help - Internal node for machines with an BAST style IDE - interface - # cpu frequency scaling support config S3C2410_CPUFREQ @@ -54,121 +18,3 @@ config S3C2410_PLLTABLE help Select the PLL table for the S3C2410 -menu "S3C2410 Machines" - -config ARCH_SMDK2410 - bool "SMDK2410/A9M2410" - select CPU_S3C2410 - select MACH_SMDK - help - Say Y here if you are using the SMDK2410 or the derived module A9M2410 - - -config ARCH_H1940 - bool "IPAQ H1940" - select CPU_S3C2410 - select PM_H1940 if PM - select S3C_DEV_USB_HOST - select S3C_DEV_NAND - select S3C2410_SETUP_TS - help - Say Y here if you are using the HP IPAQ H1940 - -config H1940BT - tristate "Control the state of H1940 bluetooth chip" - depends on ARCH_H1940 - select RFKILL - help - This is a simple driver that is able to control - the state of built in bluetooth chip on h1940. - -config PM_H1940 - bool - help - Internal node for H1940 and related PM - -config MACH_N30 - bool "Acer N30 family" - select CPU_S3C2410 - select MACH_N35 - select S3C_DEV_USB_HOST - select S3C_DEV_NAND - help - Say Y here if you want suppt for the Acer N30, Acer N35, - Navman PiN570, Yakumo AlphaX or Airis NC05 PDAs. - -config MACH_N35 - bool - help - Internal node in order to enable support for Acer N35 if Acer N30 is - selected. - -config ARCH_BAST - bool "Simtec Electronics BAST (EB2410ITX)" - select CPU_S3C2410 - select S3C2410_IOTIMING if S3C2410_CPUFREQ - select PM_SIMTEC if PM - select SIMTEC_NOR - select MACH_BAST_IDE - select S3C24XX_DCLK - select ISA - select S3C_DEV_HWMON - select S3C_DEV_USB_HOST - select S3C_DEV_NAND - help - Say Y here if you are using the Simtec Electronics EB2410ITX - development board (also known as BAST) - -config MACH_OTOM - bool "NexVision OTOM Board" - select CPU_S3C2410 - select S3C_DEV_USB_HOST - select S3C_DEV_NAND - help - Say Y here if you are using the Nex Vision OTOM board - -config MACH_AML_M5900 - bool "AML M5900 Series" - select CPU_S3C2410 - select PM_SIMTEC if PM - select S3C_DEV_USB_HOST - help - Say Y here if you are using the American Microsystems M5900 Series - - -config BAST_PC104_IRQ - bool "BAST PC104 IRQ support" - depends on ARCH_BAST - default y - help - Say Y here to enable the PC104 IRQ routing on the - Simtec BAST (EB2410ITX) - -config MACH_TCT_HAMMER - bool "TCT Hammer Board" - select CPU_S3C2410 - select S3C_DEV_USB_HOST - help - Say Y here if you are using the TinCanTools Hammer Board - - -config MACH_VR1000 - bool "Thorcom VR1000" - select PM_SIMTEC if PM - select S3C24XX_DCLK - select SIMTEC_NOR - select MACH_BAST_IDE - select CPU_S3C2410 - select S3C_DEV_USB_HOST - help - Say Y here if you are using the Thorcom VR1000 board. - -config MACH_QT2410 - bool "QT2410" - select CPU_S3C2410 - select S3C_DEV_USB_HOST - select S3C_DEV_NAND - help - Say Y here if you are using the Armzone QT2410 - -endmenu diff --git a/arch/arm/mach-s3c2410/Makefile b/arch/arm/mach-s3c2410/Makefile index 782fd81144e9..6b9a316e0041 100644 --- a/arch/arm/mach-s3c2410/Makefile +++ b/arch/arm/mach-s3c2410/Makefile @@ -9,32 +9,6 @@ obj-m := obj-n := obj- := -obj-$(CONFIG_CPU_S3C2410) += s3c2410.o -obj-$(CONFIG_CPU_S3C2410_DMA) += dma.o -obj-$(CONFIG_CPU_S3C2410_DMA) += dma.o -obj-$(CONFIG_S3C2410_PM) += pm.o sleep.o obj-$(CONFIG_S3C2410_CPUFREQ) += cpu-freq.o obj-$(CONFIG_S3C2410_PLLTABLE) += pll.o -# Machine support - -obj-$(CONFIG_ARCH_SMDK2410) += mach-smdk2410.o -obj-$(CONFIG_ARCH_H1940) += mach-h1940.o -obj-$(CONFIG_H1940BT) += h1940-bluetooth.o -obj-$(CONFIG_PM_H1940) += pm-h1940.o -obj-$(CONFIG_MACH_N30) += mach-n30.o -obj-$(CONFIG_ARCH_BAST) += mach-bast.o usb-simtec.o -obj-$(CONFIG_MACH_OTOM) += mach-otom.o -obj-$(CONFIG_MACH_AML_M5900) += mach-amlm5900.o -obj-$(CONFIG_BAST_PC104_IRQ) += bast-irq.o -obj-$(CONFIG_MACH_TCT_HAMMER) += mach-tct_hammer.o -obj-$(CONFIG_MACH_VR1000) += mach-vr1000.o usb-simtec.o -obj-$(CONFIG_MACH_QT2410) += mach-qt2410.o - -# Common bits of machine support - -obj-$(CONFIG_SIMTEC_NOR) += nor-simtec.o - -# machine additions - -obj-$(CONFIG_MACH_BAST_IDE) += bast-ide.o diff --git a/arch/arm/mach-s3c2410/Makefile.boot b/arch/arm/mach-s3c2410/Makefile.boot deleted file mode 100644 index 4457605ba04a..000000000000 --- a/arch/arm/mach-s3c2410/Makefile.boot +++ /dev/null @@ -1,7 +0,0 @@ -ifeq ($(CONFIG_PM_H1940),y) - zreladdr-y += 0x30108000 - params_phys-y := 0x30100100 -else - zreladdr-y += 0x30008000 - params_phys-y := 0x30000100 -endif diff --git a/arch/arm/mach-s3c2410/bast-ide.c b/arch/arm/mach-s3c2410/bast-ide.c deleted file mode 100644 index 298ececfa366..000000000000 --- a/arch/arm/mach-s3c2410/bast-ide.c +++ /dev/null @@ -1,112 +0,0 @@ -/* linux/arch/arm/mach-s3c2410/bast-ide.c - * - * Copyright 2007 Simtec Electronics - * http://www.simtec.co.uk/products/EB2410ITX/ - * http://armlinux.simtec.co.uk/ - * Ben Dooks - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include -#include -#include -#include - -#include -#include - -#include - -#include -#include -#include - -#include -#include -#include - -/* IDE ports */ - -static struct pata_platform_info bast_ide_platdata = { - .ioport_shift = 5, -}; - -#define IDE_CS S3C2410_CS5 - -static struct resource bast_ide0_resource[] = { - [0] = { - .start = IDE_CS + BAST_PA_IDEPRI, - .end = IDE_CS + BAST_PA_IDEPRI + (8 * 0x20) - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IDE_CS + BAST_PA_IDEPRIAUX + (6 * 0x20) , - .end = IDE_CS + BAST_PA_IDEPRIAUX + (7 * 0x20) - 1, - .flags = IORESOURCE_MEM, - }, - [2] = { - .start = IRQ_IDE0, - .end = IRQ_IDE0, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device bast_device_ide0 = { - .name = "pata_platform", - .id = 0, - .num_resources = ARRAY_SIZE(bast_ide0_resource), - .resource = bast_ide0_resource, - .dev = { - .platform_data = &bast_ide_platdata, - .coherent_dma_mask = ~0, - } - -}; - -static struct resource bast_ide1_resource[] = { - [0] = { - .start = IDE_CS + BAST_PA_IDESEC, - .end = IDE_CS + BAST_PA_IDESEC + (8 * 0x20) - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IDE_CS + BAST_PA_IDESECAUX + (6 * 0x20), - .end = IDE_CS + BAST_PA_IDESECAUX + (7 * 0x20) - 1, - .flags = IORESOURCE_MEM, - }, - [2] = { - .start = IRQ_IDE1, - .end = IRQ_IDE1, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device bast_device_ide1 = { - .name = "pata_platform", - .id = 1, - .num_resources = ARRAY_SIZE(bast_ide1_resource), - .resource = bast_ide1_resource, - .dev = { - .platform_data = &bast_ide_platdata, - .coherent_dma_mask = ~0, - } -}; - -static struct platform_device *bast_ide_devices[] __initdata = { - &bast_device_ide0, - &bast_device_ide1, -}; - -static __init int bast_ide_init(void) -{ - if (machine_is_bast() || machine_is_vr1000()) - return platform_add_devices(bast_ide_devices, - ARRAY_SIZE(bast_ide_devices)); - - return 0; -} - -fs_initcall(bast_ide_init); diff --git a/arch/arm/mach-s3c2410/bast-irq.c b/arch/arm/mach-s3c2410/bast-irq.c deleted file mode 100644 index ac7b2ad5c405..000000000000 --- a/arch/arm/mach-s3c2410/bast-irq.c +++ /dev/null @@ -1,166 +0,0 @@ -/* linux/arch/arm/mach-s3c2410/bast-irq.c - * - * Copyright 2003-2005 Simtec Electronics - * Ben Dooks - * - * http://www.simtec.co.uk/products/EB2410ITX/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -*/ - - -#include -#include -#include -#include -#include - -#include - -#include -#include - -#include - -#include -#include -#include - -#include - -#if 0 -#include -#endif - -#define irqdbf(x...) -#define irqdbf2(x...) - - -/* handle PC104 ISA interrupts from the system CPLD */ - -/* table of ISA irq nos to the relevant mask... zero means - * the irq is not implemented -*/ -static unsigned char bast_pc104_irqmasks[] = { - 0, /* 0 */ - 0, /* 1 */ - 0, /* 2 */ - 1, /* 3 */ - 0, /* 4 */ - 2, /* 5 */ - 0, /* 6 */ - 4, /* 7 */ - 0, /* 8 */ - 0, /* 9 */ - 8, /* 10 */ - 0, /* 11 */ - 0, /* 12 */ - 0, /* 13 */ - 0, /* 14 */ - 0, /* 15 */ -}; - -static unsigned char bast_pc104_irqs[] = { 3, 5, 7, 10 }; - -static void -bast_pc104_mask(struct irq_data *data) -{ - unsigned long temp; - - temp = __raw_readb(BAST_VA_PC104_IRQMASK); - temp &= ~bast_pc104_irqmasks[data->irq]; - __raw_writeb(temp, BAST_VA_PC104_IRQMASK); -} - -static void -bast_pc104_maskack(struct irq_data *data) -{ - struct irq_desc *desc = irq_desc + IRQ_ISA; - - bast_pc104_mask(data); - desc->irq_data.chip->irq_ack(&desc->irq_data); -} - -static void -bast_pc104_unmask(struct irq_data *data) -{ - unsigned long temp; - - temp = __raw_readb(BAST_VA_PC104_IRQMASK); - temp |= bast_pc104_irqmasks[data->irq]; - __raw_writeb(temp, BAST_VA_PC104_IRQMASK); -} - -static struct irq_chip bast_pc104_chip = { - .irq_mask = bast_pc104_mask, - .irq_unmask = bast_pc104_unmask, - .irq_ack = bast_pc104_maskack -}; - -static void -bast_irq_pc104_demux(unsigned int irq, - struct irq_desc *desc) -{ - unsigned int stat; - unsigned int irqno; - int i; - - stat = __raw_readb(BAST_VA_PC104_IRQREQ) & 0xf; - - if (unlikely(stat == 0)) { - /* ack if we get an irq with nothing (ie, startup) */ - - desc = irq_desc + IRQ_ISA; - desc->irq_data.chip->irq_ack(&desc->irq_data); - } else { - /* handle the IRQ */ - - for (i = 0; stat != 0; i++, stat >>= 1) { - if (stat & 1) { - irqno = bast_pc104_irqs[i]; - generic_handle_irq(irqno); - } - } - } -} - -static __init int bast_irq_init(void) -{ - unsigned int i; - - if (machine_is_bast()) { - printk(KERN_INFO "BAST PC104 IRQ routing, Copyright 2005 Simtec Electronics\n"); - - /* zap all the IRQs */ - - __raw_writeb(0x0, BAST_VA_PC104_IRQMASK); - - irq_set_chained_handler(IRQ_ISA, bast_irq_pc104_demux); - - /* register our IRQs */ - - for (i = 0; i < 4; i++) { - unsigned int irqno = bast_pc104_irqs[i]; - - irq_set_chip_and_handler(irqno, &bast_pc104_chip, - handle_level_irq); - set_irq_flags(irqno, IRQF_VALID); - } - } - - return 0; -} - -arch_initcall(bast_irq_init); diff --git a/arch/arm/mach-s3c2410/common.h b/arch/arm/mach-s3c2410/common.h deleted file mode 100644 index f65dc8062961..000000000000 --- a/arch/arm/mach-s3c2410/common.h +++ /dev/null @@ -1,17 +0,0 @@ -/* - * Copyright (c) 2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * Common Header for S3C2410 machines - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ARCH_ARM_MACH_S3C2410_COMMON_H -#define __ARCH_ARM_MACH_S3C2410_COMMON_H - -void s3c2410_restart(char mode, const char *cmd); - -#endif /* __ARCH_ARM_MACH_S3C2410_COMMON_H */ diff --git a/arch/arm/mach-s3c2410/dma.c b/arch/arm/mach-s3c2410/dma.c deleted file mode 100644 index 2afd00014a77..000000000000 --- a/arch/arm/mach-s3c2410/dma.c +++ /dev/null @@ -1,185 +0,0 @@ -/* linux/arch/arm/mach-s3c2410/dma.c - * - * Copyright (c) 2006 Simtec Electronics - * Ben Dooks - * - * S3C2410 DMA selection - * - * http://armlinux.simtec.co.uk/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include -#include -#include -#include - -#include -#include - -#include -#include - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -static struct s3c24xx_dma_map __initdata s3c2410_dma_mappings[] = { - [DMACH_XD0] = { - .name = "xdreq0", - .channels[0] = S3C2410_DCON_CH0_XDREQ0 | DMA_CH_VALID, - }, - [DMACH_XD1] = { - .name = "xdreq1", - .channels[1] = S3C2410_DCON_CH1_XDREQ1 | DMA_CH_VALID, - }, - [DMACH_SDI] = { - .name = "sdi", - .channels[0] = S3C2410_DCON_CH0_SDI | DMA_CH_VALID, - .channels[2] = S3C2410_DCON_CH2_SDI | DMA_CH_VALID, - .channels[3] = S3C2410_DCON_CH3_SDI | DMA_CH_VALID, - }, - [DMACH_SPI0] = { - .name = "spi0", - .channels[1] = S3C2410_DCON_CH1_SPI | DMA_CH_VALID, - }, - [DMACH_SPI1] = { - .name = "spi1", - .channels[3] = S3C2410_DCON_CH3_SPI | DMA_CH_VALID, - }, - [DMACH_UART0] = { - .name = "uart0", - .channels[0] = S3C2410_DCON_CH0_UART0 | DMA_CH_VALID, - }, - [DMACH_UART1] = { - .name = "uart1", - .channels[1] = S3C2410_DCON_CH1_UART1 | DMA_CH_VALID, - }, - [DMACH_UART2] = { - .name = "uart2", - .channels[3] = S3C2410_DCON_CH3_UART2 | DMA_CH_VALID, - }, - [DMACH_TIMER] = { - .name = "timer", - .channels[0] = S3C2410_DCON_CH0_TIMER | DMA_CH_VALID, - .channels[2] = S3C2410_DCON_CH2_TIMER | DMA_CH_VALID, - .channels[3] = S3C2410_DCON_CH3_TIMER | DMA_CH_VALID, - }, - [DMACH_I2S_IN] = { - .name = "i2s-sdi", - .channels[1] = S3C2410_DCON_CH1_I2SSDI | DMA_CH_VALID, - .channels[2] = S3C2410_DCON_CH2_I2SSDI | DMA_CH_VALID, - }, - [DMACH_I2S_OUT] = { - .name = "i2s-sdo", - .channels[2] = S3C2410_DCON_CH2_I2SSDO | DMA_CH_VALID, - }, - [DMACH_USB_EP1] = { - .name = "usb-ep1", - .channels[0] = S3C2410_DCON_CH0_USBEP1 | DMA_CH_VALID, - }, - [DMACH_USB_EP2] = { - .name = "usb-ep2", - .channels[1] = S3C2410_DCON_CH1_USBEP2 | DMA_CH_VALID, - }, - [DMACH_USB_EP3] = { - .name = "usb-ep3", - .channels[2] = S3C2410_DCON_CH2_USBEP3 | DMA_CH_VALID, - }, - [DMACH_USB_EP4] = { - .name = "usb-ep4", - .channels[3] =S3C2410_DCON_CH3_USBEP4 | DMA_CH_VALID, - }, -}; - -static void s3c2410_dma_select(struct s3c2410_dma_chan *chan, - struct s3c24xx_dma_map *map) -{ - chan->dcon = map->channels[chan->number] & ~DMA_CH_VALID; -} - -static struct s3c24xx_dma_selection __initdata s3c2410_dma_sel = { - .select = s3c2410_dma_select, - .dcon_mask = 7 << 24, - .map = s3c2410_dma_mappings, - .map_size = ARRAY_SIZE(s3c2410_dma_mappings), -}; - -static struct s3c24xx_dma_order __initdata s3c2410_dma_order = { - .channels = { - [DMACH_SDI] = { - .list = { - [0] = 3 | DMA_CH_VALID, - [1] = 2 | DMA_CH_VALID, - [2] = 0 | DMA_CH_VALID, - }, - }, - [DMACH_I2S_IN] = { - .list = { - [0] = 1 | DMA_CH_VALID, - [1] = 2 | DMA_CH_VALID, - }, - }, - }, -}; - -static int __init s3c2410_dma_add(struct device *dev) -{ - s3c2410_dma_init(); - s3c24xx_dma_order_set(&s3c2410_dma_order); - return s3c24xx_dma_init_map(&s3c2410_dma_sel); -} - -#if defined(CONFIG_CPU_S3C2410) -static struct subsys_interface s3c2410_dma_interface = { - .name = "s3c2410_dma", - .subsys = &s3c2410_subsys, - .add_dev = s3c2410_dma_add, -}; - -static int __init s3c2410_dma_drvinit(void) -{ - return subsys_interface_register(&s3c2410_interface); -} - -arch_initcall(s3c2410_dma_drvinit); - -static struct subsys_interface s3c2410a_dma_interface = { - .name = "s3c2410a_dma", - .subsys = &s3c2410a_subsys, - .add_dev = s3c2410_dma_add, -}; - -static int __init s3c2410a_dma_drvinit(void) -{ - return subsys_interface_register(&s3c2410a_dma_interface); -} - -arch_initcall(s3c2410a_dma_drvinit); -#endif - -#if defined(CONFIG_CPU_S3C2442) -/* S3C2442 DMA contains the same selection table as the S3C2410 */ -static struct subsys_interface s3c2442_dma_interface = { - .name = "s3c2442_dma", - .subsys = &s3c2442_subsys, - .add_dev = s3c2410_dma_add, -}; - -static int __init s3c2442_dma_drvinit(void) -{ - return subsys_interface_register(&s3c2442_dma_interface); -} - -arch_initcall(s3c2442_dma_drvinit); -#endif - diff --git a/arch/arm/mach-s3c2410/h1940-bluetooth.c b/arch/arm/mach-s3c2410/h1940-bluetooth.c deleted file mode 100644 index a5eeb62ce1c2..000000000000 --- a/arch/arm/mach-s3c2410/h1940-bluetooth.c +++ /dev/null @@ -1,157 +0,0 @@ -/* - * arch/arm/mach-s3c2410/h1940-bluetooth.c - * Copyright (c) Arnaud Patard - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file COPYING in the main directory of this archive for - * more details. - * - * S3C2410 bluetooth "driver" - * - */ - -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include - -#define DRV_NAME "h1940-bt" - -/* Bluetooth control */ -static void h1940bt_enable(int on) -{ - if (on) { - /* Power on the chip */ - gpio_set_value(H1940_LATCH_BLUETOOTH_POWER, 1); - /* Reset the chip */ - mdelay(10); - - gpio_set_value(S3C2410_GPH(1), 1); - mdelay(10); - gpio_set_value(S3C2410_GPH(1), 0); - - h1940_led_blink_set(-EINVAL, GPIO_LED_BLINK, NULL, NULL); - } - else { - gpio_set_value(S3C2410_GPH(1), 1); - mdelay(10); - gpio_set_value(S3C2410_GPH(1), 0); - mdelay(10); - gpio_set_value(H1940_LATCH_BLUETOOTH_POWER, 0); - - h1940_led_blink_set(-EINVAL, GPIO_LED_NO_BLINK_LOW, NULL, NULL); - } -} - -static int h1940bt_set_block(void *data, bool blocked) -{ - h1940bt_enable(!blocked); - return 0; -} - -static const struct rfkill_ops h1940bt_rfkill_ops = { - .set_block = h1940bt_set_block, -}; - -static int __devinit h1940bt_probe(struct platform_device *pdev) -{ - struct rfkill *rfk; - int ret = 0; - - ret = gpio_request(S3C2410_GPH(1), dev_name(&pdev->dev)); - if (ret) { - dev_err(&pdev->dev, "could not get GPH1\n"); - return ret; - } - - ret = gpio_request(H1940_LATCH_BLUETOOTH_POWER, dev_name(&pdev->dev)); - if (ret) { - gpio_free(S3C2410_GPH(1)); - dev_err(&pdev->dev, "could not get BT_POWER\n"); - return ret; - } - - /* Configures BT serial port GPIOs */ - s3c_gpio_cfgpin(S3C2410_GPH(0), S3C2410_GPH0_nCTS0); - s3c_gpio_setpull(S3C2410_GPH(0), S3C_GPIO_PULL_NONE); - s3c_gpio_cfgpin(S3C2410_GPH(1), S3C2410_GPIO_OUTPUT); - s3c_gpio_setpull(S3C2410_GPH(1), S3C_GPIO_PULL_NONE); - s3c_gpio_cfgpin(S3C2410_GPH(2), S3C2410_GPH2_TXD0); - s3c_gpio_setpull(S3C2410_GPH(2), S3C_GPIO_PULL_NONE); - s3c_gpio_cfgpin(S3C2410_GPH(3), S3C2410_GPH3_RXD0); - s3c_gpio_setpull(S3C2410_GPH(3), S3C_GPIO_PULL_NONE); - - rfk = rfkill_alloc(DRV_NAME, &pdev->dev, RFKILL_TYPE_BLUETOOTH, - &h1940bt_rfkill_ops, NULL); - if (!rfk) { - ret = -ENOMEM; - goto err_rfk_alloc; - } - - ret = rfkill_register(rfk); - if (ret) - goto err_rfkill; - - platform_set_drvdata(pdev, rfk); - - return 0; - -err_rfkill: - rfkill_destroy(rfk); -err_rfk_alloc: - return ret; -} - -static int h1940bt_remove(struct platform_device *pdev) -{ - struct rfkill *rfk = platform_get_drvdata(pdev); - - platform_set_drvdata(pdev, NULL); - gpio_free(S3C2410_GPH(1)); - - if (rfk) { - rfkill_unregister(rfk); - rfkill_destroy(rfk); - } - rfk = NULL; - - h1940bt_enable(0); - - return 0; -} - - -static struct platform_driver h1940bt_driver = { - .driver = { - .name = DRV_NAME, - }, - .probe = h1940bt_probe, - .remove = h1940bt_remove, -}; - - -static int __init h1940bt_init(void) -{ - return platform_driver_register(&h1940bt_driver); -} - -static void __exit h1940bt_exit(void) -{ - platform_driver_unregister(&h1940bt_driver); -} - -module_init(h1940bt_init); -module_exit(h1940bt_exit); - -MODULE_AUTHOR("Arnaud Patard "); -MODULE_DESCRIPTION("Driver for the iPAQ H1940 bluetooth chip"); -MODULE_LICENSE("GPL"); diff --git a/arch/arm/mach-s3c2410/include/mach/anubis-cpld.h b/arch/arm/mach-s3c2410/include/mach/anubis-cpld.h deleted file mode 100644 index 1b614d5a81f3..000000000000 --- a/arch/arm/mach-s3c2410/include/mach/anubis-cpld.h +++ /dev/null @@ -1,25 +0,0 @@ -/* arch/arm/mach-s3c2410/include/mach/anubis-cpld.h - * - * Copyright (c) 2005 Simtec Electronics - * http://www.simtec.co.uk/products/ - * Ben Dooks - * - * ANUBIS - CPLD control constants - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_ANUBISCPLD_H -#define __ASM_ARCH_ANUBISCPLD_H - -/* CTRL2 - NAND WP control, IDE Reset assert/check */ - -#define ANUBIS_CTRL1_NANDSEL (0x3) - -/* IDREG - revision */ - -#define ANUBIS_IDREG_REVMASK (0x7) - -#endif /* __ASM_ARCH_ANUBISCPLD_H */ diff --git a/arch/arm/mach-s3c2410/include/mach/anubis-irq.h b/arch/arm/mach-s3c2410/include/mach/anubis-irq.h deleted file mode 100644 index a2a328134e34..000000000000 --- a/arch/arm/mach-s3c2410/include/mach/anubis-irq.h +++ /dev/null @@ -1,21 +0,0 @@ -/* arch/arm/mach-s3c2410/include/mach/anubis-irq.h - * - * Copyright (c) 2005 Simtec Electronics - * http://www.simtec.co.uk/products/ - * Ben Dooks - * - * ANUBIS - IRQ Number definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_ANUBISIRQ_H -#define __ASM_ARCH_ANUBISIRQ_H - -#define IRQ_IDE0 IRQ_EINT2 -#define IRQ_IDE1 IRQ_EINT3 -#define IRQ_ASIX IRQ_EINT1 - -#endif /* __ASM_ARCH_ANUBISIRQ_H */ diff --git a/arch/arm/mach-s3c2410/include/mach/anubis-map.h b/arch/arm/mach-s3c2410/include/mach/anubis-map.h deleted file mode 100644 index c9deb3a5b2c3..000000000000 --- a/arch/arm/mach-s3c2410/include/mach/anubis-map.h +++ /dev/null @@ -1,38 +0,0 @@ -/* arch/arm/mach-s3c2410/include/mach/anubis-map.h - * - * Copyright (c) 2005 Simtec Electronics - * http://www.simtec.co.uk/products/ - * Ben Dooks - * - * ANUBIS - Memory map definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -/* needs arch/map.h including with this */ - -#ifndef __ASM_ARCH_ANUBISMAP_H -#define __ASM_ARCH_ANUBISMAP_H - -/* start peripherals off after the S3C2410 */ - -#define ANUBIS_IOADDR(x) (S3C2410_ADDR((x) + 0x01800000)) - -#define ANUBIS_PA_CPLD (S3C2410_CS1 | (1<<26)) - -/* we put the CPLD registers next, to get them out of the way */ - -#define ANUBIS_VA_CTRL1 ANUBIS_IOADDR(0x00000000) /* 0x01800000 */ -#define ANUBIS_PA_CTRL1 (ANUBIS_PA_CPLD) - -#define ANUBIS_VA_IDREG ANUBIS_IOADDR(0x00300000) /* 0x01B00000 */ -#define ANUBIS_PA_IDREG (ANUBIS_PA_CPLD + (3<<23)) - -#define ANUBIS_IDEPRI ANUBIS_IOADDR(0x01000000) -#define ANUBIS_IDEPRIAUX ANUBIS_IOADDR(0x01100000) -#define ANUBIS_IDESEC ANUBIS_IOADDR(0x01200000) -#define ANUBIS_IDESECAUX ANUBIS_IOADDR(0x01300000) - -#endif /* __ASM_ARCH_ANUBISMAP_H */ diff --git a/arch/arm/mach-s3c2410/include/mach/bast-cpld.h b/arch/arm/mach-s3c2410/include/mach/bast-cpld.h deleted file mode 100644 index bee2a7a932a0..000000000000 --- a/arch/arm/mach-s3c2410/include/mach/bast-cpld.h +++ /dev/null @@ -1,53 +0,0 @@ -/* arch/arm/mach-s3c2410/include/mach/bast-cpld.h - * - * Copyright (c) 2003-2004 Simtec Electronics - * Ben Dooks - * - * BAST - CPLD control constants - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_BASTCPLD_H -#define __ASM_ARCH_BASTCPLD_H - -/* CTRL1 - Audio LR routing */ - -#define BAST_CPLD_CTRL1_LRCOFF (0x00) -#define BAST_CPLD_CTRL1_LRCADC (0x01) -#define BAST_CPLD_CTRL1_LRCDAC (0x02) -#define BAST_CPLD_CTRL1_LRCARM (0x03) -#define BAST_CPLD_CTRL1_LRMASK (0x03) - -/* CTRL2 - NAND WP control, IDE Reset assert/check */ - -#define BAST_CPLD_CTRL2_WNAND (0x04) -#define BAST_CPLD_CTLR2_IDERST (0x08) - -/* CTRL3 - rom write control, CPLD identity */ - -#define BAST_CPLD_CTRL3_IDMASK (0x0e) -#define BAST_CPLD_CTRL3_ROMWEN (0x01) - -/* CTRL4 - 8bit LCD interface control/status */ - -#define BAST_CPLD_CTRL4_LLAT (0x01) -#define BAST_CPLD_CTRL4_LCDRW (0x02) -#define BAST_CPLD_CTRL4_LCDCMD (0x04) -#define BAST_CPLD_CTRL4_LCDE2 (0x01) - -/* CTRL5 - DMA routing */ - -#define BAST_CPLD_DMA0_PRIIDE (0<<0) -#define BAST_CPLD_DMA0_SECIDE (1<<0) -#define BAST_CPLD_DMA0_ISA15 (2<<0) -#define BAST_CPLD_DMA0_ISA36 (3<<0) - -#define BAST_CPLD_DMA1_PRIIDE (0<<2) -#define BAST_CPLD_DMA1_SECIDE (1<<2) -#define BAST_CPLD_DMA1_ISA15 (2<<2) -#define BAST_CPLD_DMA1_ISA36 (3<<2) - -#endif /* __ASM_ARCH_BASTCPLD_H */ diff --git a/arch/arm/mach-s3c2410/include/mach/bast-irq.h b/arch/arm/mach-s3c2410/include/mach/bast-irq.h deleted file mode 100644 index cac428c42e7f..000000000000 --- a/arch/arm/mach-s3c2410/include/mach/bast-irq.h +++ /dev/null @@ -1,29 +0,0 @@ -/* arch/arm/mach-s3c2410/include/mach/bast-irq.h - * - * Copyright (c) 2003-2004 Simtec Electronics - * Ben Dooks - * - * Machine BAST - IRQ Number definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_BASTIRQ_H -#define __ASM_ARCH_BASTIRQ_H - -/* irq numbers to onboard peripherals */ - -#define IRQ_USBOC IRQ_EINT18 -#define IRQ_IDE0 IRQ_EINT16 -#define IRQ_IDE1 IRQ_EINT17 -#define IRQ_PCSERIAL1 IRQ_EINT15 -#define IRQ_PCSERIAL2 IRQ_EINT14 -#define IRQ_PCPARALLEL IRQ_EINT13 -#define IRQ_ASIX IRQ_EINT11 -#define IRQ_DM9000 IRQ_EINT10 -#define IRQ_ISA IRQ_EINT9 -#define IRQ_SMALERT IRQ_EINT8 - -#endif /* __ASM_ARCH_BASTIRQ_H */ diff --git a/arch/arm/mach-s3c2410/include/mach/bast-map.h b/arch/arm/mach-s3c2410/include/mach/bast-map.h deleted file mode 100644 index 6e7dc9d0cf0e..000000000000 --- a/arch/arm/mach-s3c2410/include/mach/bast-map.h +++ /dev/null @@ -1,146 +0,0 @@ -/* arch/arm/mach-s3c2410/include/mach/bast-map.h - * - * Copyright (c) 2003-2004 Simtec Electronics - * Ben Dooks - * - * Machine BAST - Memory map definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -/* needs arch/map.h including with this */ - -/* ok, we've used up to 0x13000000, now we need to find space for the - * peripherals that live in the nGCS[x] areas, which are quite numerous - * in their space. We also have the board's CPLD to find register space - * for. - */ - -#ifndef __ASM_ARCH_BASTMAP_H -#define __ASM_ARCH_BASTMAP_H - -#define BAST_IOADDR(x) (S3C2410_ADDR((x) + 0x01300000)) - -/* we put the CPLD registers next, to get them out of the way */ - -#define BAST_VA_CTRL1 BAST_IOADDR(0x00000000) /* 0x01300000 */ -#define BAST_PA_CTRL1 (S3C2410_CS5 | 0x7800000) - -#define BAST_VA_CTRL2 BAST_IOADDR(0x00100000) /* 0x01400000 */ -#define BAST_PA_CTRL2 (S3C2410_CS1 | 0x6000000) - -#define BAST_VA_CTRL3 BAST_IOADDR(0x00200000) /* 0x01500000 */ -#define BAST_PA_CTRL3 (S3C2410_CS1 | 0x6800000) - -#define BAST_VA_CTRL4 BAST_IOADDR(0x00300000) /* 0x01600000 */ -#define BAST_PA_CTRL4 (S3C2410_CS1 | 0x7000000) - -/* next, we have the PC104 ISA interrupt registers */ - -#define BAST_PA_PC104_IRQREQ (S3C2410_CS5 | 0x6000000) /* 0x01700000 */ -#define BAST_VA_PC104_IRQREQ BAST_IOADDR(0x00400000) - -#define BAST_PA_PC104_IRQRAW (S3C2410_CS5 | 0x6800000) /* 0x01800000 */ -#define BAST_VA_PC104_IRQRAW BAST_IOADDR(0x00500000) - -#define BAST_PA_PC104_IRQMASK (S3C2410_CS5 | 0x7000000) /* 0x01900000 */ -#define BAST_VA_PC104_IRQMASK BAST_IOADDR(0x00600000) - -#define BAST_PA_LCD_RCMD1 (0x8800000) -#define BAST_VA_LCD_RCMD1 BAST_IOADDR(0x00700000) - -#define BAST_PA_LCD_WCMD1 (0x8000000) -#define BAST_VA_LCD_WCMD1 BAST_IOADDR(0x00800000) - -#define BAST_PA_LCD_RDATA1 (0x9800000) -#define BAST_VA_LCD_RDATA1 BAST_IOADDR(0x00900000) - -#define BAST_PA_LCD_WDATA1 (0x9000000) -#define BAST_VA_LCD_WDATA1 BAST_IOADDR(0x00A00000) - -#define BAST_PA_LCD_RCMD2 (0xA800000) -#define BAST_VA_LCD_RCMD2 BAST_IOADDR(0x00B00000) - -#define BAST_PA_LCD_WCMD2 (0xA000000) -#define BAST_VA_LCD_WCMD2 BAST_IOADDR(0x00C00000) - -#define BAST_PA_LCD_RDATA2 (0xB800000) -#define BAST_VA_LCD_RDATA2 BAST_IOADDR(0x00D00000) - -#define BAST_PA_LCD_WDATA2 (0xB000000) -#define BAST_VA_LCD_WDATA2 BAST_IOADDR(0x00E00000) - - -/* 0xE0000000 contains the IO space that is split by speed and - * wether the access is for 8 or 16bit IO... this ensures that - * the correct access is made - * - * 0x10000000 of space, partitioned as so: - * - * 0x00000000 to 0x04000000 8bit, slow - * 0x04000000 to 0x08000000 16bit, slow - * 0x08000000 to 0x0C000000 16bit, net - * 0x0C000000 to 0x10000000 16bit, fast - * - * each of these spaces has the following in: - * - * 0x00000000 to 0x01000000 16MB ISA IO space - * 0x01000000 to 0x02000000 16MB ISA memory space - * 0x02000000 to 0x02100000 1MB IDE primary channel - * 0x02100000 to 0x02200000 1MB IDE primary channel aux - * 0x02200000 to 0x02400000 1MB IDE secondary channel - * 0x02300000 to 0x02400000 1MB IDE secondary channel aux - * 0x02400000 to 0x02500000 1MB ASIX ethernet controller - * 0x02500000 to 0x02600000 1MB Davicom DM9000 ethernet controller - * 0x02600000 to 0x02700000 1MB PC SuperIO controller - * - * the phyiscal layout of the zones are: - * nGCS2 - 8bit, slow - * nGCS3 - 16bit, slow - * nGCS4 - 16bit, net - * nGCS5 - 16bit, fast - */ - -#define BAST_VA_MULTISPACE (0xE0000000) - -#define BAST_VA_ISAIO (BAST_VA_MULTISPACE + 0x00000000) -#define BAST_VA_ISAMEM (BAST_VA_MULTISPACE + 0x01000000) -#define BAST_VA_IDEPRI (BAST_VA_MULTISPACE + 0x02000000) -#define BAST_VA_IDEPRIAUX (BAST_VA_MULTISPACE + 0x02100000) -#define BAST_VA_IDESEC (BAST_VA_MULTISPACE + 0x02200000) -#define BAST_VA_IDESECAUX (BAST_VA_MULTISPACE + 0x02300000) -#define BAST_VA_ASIXNET (BAST_VA_MULTISPACE + 0x02400000) -#define BAST_VA_DM9000 (BAST_VA_MULTISPACE + 0x02500000) -#define BAST_VA_SUPERIO (BAST_VA_MULTISPACE + 0x02600000) - -#define BAST_VA_MULTISPACE (0xE0000000) - -#define BAST_VAM_CS2 (0x00000000) -#define BAST_VAM_CS3 (0x04000000) -#define BAST_VAM_CS4 (0x08000000) -#define BAST_VAM_CS5 (0x0C000000) - -/* physical offset addresses for the peripherals */ - -#define BAST_PA_ISAIO (0x00000000) -#define BAST_PA_ASIXNET (0x01000000) -#define BAST_PA_SUPERIO (0x01800000) -#define BAST_PA_IDEPRI (0x02000000) -#define BAST_PA_IDEPRIAUX (0x02800000) -#define BAST_PA_IDESEC (0x03000000) -#define BAST_PA_IDESECAUX (0x03800000) -#define BAST_PA_ISAMEM (0x04000000) -#define BAST_PA_DM9000 (0x05000000) - -/* some configurations for the peripherals */ - -#define BAST_PCSIO (BAST_VA_SUPERIO + BAST_VAM_CS2) -/* */ - -#define BAST_ASIXNET_CS BAST_VAM_CS5 -#define BAST_IDE_CS BAST_VAM_CS5 -#define BAST_DM9000_CS BAST_VAM_CS4 - -#endif /* __ASM_ARCH_BASTMAP_H */ diff --git a/arch/arm/mach-s3c2410/include/mach/bast-pmu.h b/arch/arm/mach-s3c2410/include/mach/bast-pmu.h deleted file mode 100644 index 4c38b39b741d..000000000000 --- a/arch/arm/mach-s3c2410/include/mach/bast-pmu.h +++ /dev/null @@ -1,40 +0,0 @@ -/* arch/arm/mach-s3c2410/include/mach/bast-pmu.h - * - * Copyright (c) 2003-2004 Simtec Electronics - * Ben Dooks - * Vincent Sanders - * - * Machine BAST - Power Management chip - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_BASTPMU_H -#define __ASM_ARCH_BASTPMU_H "08_OCT_2004" - -#define BASTPMU_REG_IDENT (0x00) -#define BASTPMU_REG_VERSION (0x01) -#define BASTPMU_REG_DDCCTRL (0x02) -#define BASTPMU_REG_POWER (0x03) -#define BASTPMU_REG_RESET (0x04) -#define BASTPMU_REG_GWO (0x05) -#define BASTPMU_REG_WOL (0x06) -#define BASTPMU_REG_WOR (0x07) -#define BASTPMU_REG_UID (0x09) - -#define BASTPMU_EEPROM (0xC0) - -#define BASTPMU_EEP_UID (BASTPMU_EEPROM + 0) -#define BASTPMU_EEP_WOL (BASTPMU_EEPROM + 8) -#define BASTPMU_EEP_WOR (BASTPMU_EEPROM + 9) - -#define BASTPMU_IDENT_0 0x53 -#define BASTPMU_IDENT_1 0x42 -#define BASTPMU_IDENT_2 0x50 -#define BASTPMU_IDENT_3 0x4d - -#define BASTPMU_RESET_GUARD (0x55) - -#endif /* __ASM_ARCH_BASTPMU_H */ diff --git a/arch/arm/mach-s3c2410/include/mach/debug-macro.S b/arch/arm/mach-s3c2410/include/mach/debug-macro.S deleted file mode 100644 index 4135de87d1f7..000000000000 --- a/arch/arm/mach-s3c2410/include/mach/debug-macro.S +++ /dev/null @@ -1,101 +0,0 @@ -/* arch/arm/mach-s3c2410/include/mach/debug-macro.S - * - * Debugging macro include header - * - * Copyright (C) 1994-1999 Russell King - * Copyright (C) 2005 Simtec Electronics - * - * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include -#include -#include - -#define S3C2410_UART1_OFF (0x4000) -#define SHIFT_2440TXF (14-9) - - .macro addruart, rp, rv, tmp - ldr \rp, = S3C24XX_PA_UART - ldr \rv, = S3C24XX_VA_UART -#if CONFIG_DEBUG_S3C_UART != 0 - add \rp, \rp, #(S3C2410_UART1_OFF * CONFIG_DEBUG_S3C_UART) - add \rv, \rv, #(S3C2410_UART1_OFF * CONFIG_DEBUG_S3C_UART) -#endif - .endm - - .macro fifo_full_s3c24xx rd, rx - @ check for arm920 vs arm926. currently assume all arm926 - @ devices have an 64 byte FIFO identical to the s3c2440 - mrc p15, 0, \rd, c0, c0 - and \rd, \rd, #0xff0 - teq \rd, #0x260 - beq 1004f - mrc p15, 0, \rd, c1, c0 - tst \rd, #1 - addeq \rd, \rx, #(S3C24XX_PA_GPIO - S3C24XX_PA_UART) - addne \rd, \rx, #(S3C24XX_VA_GPIO - S3C24XX_VA_UART) - bic \rd, \rd, #0xff000 - ldr \rd, [ \rd, # S3C2410_GSTATUS1 - S3C2410_GPIOREG(0) ] - and \rd, \rd, #0x00ff0000 - teq \rd, #0x00440000 @ is it 2440? -1004: - ldr \rd, [ \rx, # S3C2410_UFSTAT ] - moveq \rd, \rd, lsr #SHIFT_2440TXF - tst \rd, #S3C2410_UFSTAT_TXFULL - .endm - - .macro fifo_full_s3c2410 rd, rx - ldr \rd, [ \rx, # S3C2410_UFSTAT ] - tst \rd, #S3C2410_UFSTAT_TXFULL - .endm - -/* fifo level reading */ - - .macro fifo_level_s3c24xx rd, rx - @ check for arm920 vs arm926. currently assume all arm926 - @ devices have an 64 byte FIFO identical to the s3c2440 - mrc p15, 0, \rd, c0, c0 - and \rd, \rd, #0xff0 - teq \rd, #0x260 - beq 10000f - mrc p15, 0, \rd, c1, c0 - tst \rd, #1 - addeq \rd, \rx, #(S3C24XX_PA_GPIO - S3C24XX_PA_UART) - addne \rd, \rx, #(S3C24XX_VA_GPIO - S3C24XX_VA_UART) - bic \rd, \rd, #0xff000 - ldr \rd, [ \rd, # S3C2410_GSTATUS1 - S3C2410_GPIOREG(0) ] - and \rd, \rd, #0x00ff0000 - teq \rd, #0x00440000 @ is it 2440? - -10000: - ldr \rd, [ \rx, # S3C2410_UFSTAT ] - andne \rd, \rd, #S3C2410_UFSTAT_TXMASK - andeq \rd, \rd, #S3C2440_UFSTAT_TXMASK - .endm - - .macro fifo_level_s3c2410 rd, rx - ldr \rd, [ \rx, # S3C2410_UFSTAT ] - and \rd, \rd, #S3C2410_UFSTAT_TXMASK - .endm - -/* Select the correct implementation depending on the configuration. The - * S3C2440 will get selected by default, as these are the most widely - * used variants of these -*/ - -#if defined(CONFIG_CPU_LLSERIAL_S3C2410_ONLY) -#define fifo_full fifo_full_s3c2410 -#define fifo_level fifo_level_s3c2410 -#elif !defined(CONFIG_CPU_LLSERIAL_S3C2440_ONLY) -#define fifo_full fifo_full_s3c24xx -#define fifo_level fifo_level_s3c24xx -#endif - -/* include the reset of the code which will do the work */ - -#include diff --git a/arch/arm/mach-s3c2410/include/mach/dma.h b/arch/arm/mach-s3c2410/include/mach/dma.h deleted file mode 100644 index acbdfecd4186..000000000000 --- a/arch/arm/mach-s3c2410/include/mach/dma.h +++ /dev/null @@ -1,210 +0,0 @@ -/* arch/arm/mach-s3c2410/include/mach/dma.h - * - * Copyright (C) 2003-2006 Simtec Electronics - * Ben Dooks - * - * Samsung S3C24XX DMA support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_DMA_H -#define __ASM_ARCH_DMA_H __FILE__ - -#include - -#define MAX_DMA_TRANSFER_SIZE 0x100000 /* Data Unit is half word */ - -/* We use `virtual` dma channels to hide the fact we have only a limited - * number of DMA channels, and not of all of them (dependent on the device) - * can be attached to any DMA source. We therefore let the DMA core handle - * the allocation of hardware channels to clients. -*/ - -enum dma_ch { - DMACH_XD0, - DMACH_XD1, - DMACH_SDI, - DMACH_SPI0, - DMACH_SPI1, - DMACH_UART0, - DMACH_UART1, - DMACH_UART2, - DMACH_TIMER, - DMACH_I2S_IN, - DMACH_I2S_OUT, - DMACH_PCM_IN, - DMACH_PCM_OUT, - DMACH_MIC_IN, - DMACH_USB_EP1, - DMACH_USB_EP2, - DMACH_USB_EP3, - DMACH_USB_EP4, - DMACH_UART0_SRC2, /* s3c2412 second uart sources */ - DMACH_UART1_SRC2, - DMACH_UART2_SRC2, - DMACH_UART3, /* s3c2443 has extra uart */ - DMACH_UART3_SRC2, - DMACH_MAX, /* the end entry */ -}; - -static inline bool samsung_dma_has_circular(void) -{ - return false; -} - -static inline bool samsung_dma_is_dmadev(void) -{ - return false; -} - -#include - -#define DMACH_LOW_LEVEL (1<<28) /* use this to specifiy hardware ch no */ - -/* we have 4 dma channels */ -#if !defined(CONFIG_CPU_S3C2443) && !defined(CONFIG_CPU_S3C2416) -#define S3C_DMA_CHANNELS (4) -#else -#define S3C_DMA_CHANNELS (6) -#endif - -/* types */ - -enum s3c2410_dma_state { - S3C2410_DMA_IDLE, - S3C2410_DMA_RUNNING, - S3C2410_DMA_PAUSED -}; - -/* enum s3c2410_dma_loadst - * - * This represents the state of the DMA engine, wrt to the loaded / running - * transfers. Since we don't have any way of knowing exactly the state of - * the DMA transfers, we need to know the state to make decisions on wether - * we can - * - * S3C2410_DMA_NONE - * - * There are no buffers loaded (the channel should be inactive) - * - * S3C2410_DMA_1LOADED - * - * There is one buffer loaded, however it has not been confirmed to be - * loaded by the DMA engine. This may be because the channel is not - * yet running, or the DMA driver decided that it was too costly to - * sit and wait for it to happen. - * - * S3C2410_DMA_1RUNNING - * - * The buffer has been confirmed running, and not finisged - * - * S3C2410_DMA_1LOADED_1RUNNING - * - * There is a buffer waiting to be loaded by the DMA engine, and one - * currently running. -*/ - -enum s3c2410_dma_loadst { - S3C2410_DMALOAD_NONE, - S3C2410_DMALOAD_1LOADED, - S3C2410_DMALOAD_1RUNNING, - S3C2410_DMALOAD_1LOADED_1RUNNING, -}; - - -/* flags */ - -#define S3C2410_DMAF_SLOW (1<<0) /* slow, so don't worry about - * waiting for reloads */ -#define S3C2410_DMAF_AUTOSTART (1<<1) /* auto-start if buffer queued */ - -#define S3C2410_DMAF_CIRCULAR (1 << 2) /* no circular dma support */ - -/* dma buffer */ - -struct s3c2410_dma_buf; - -/* s3c2410_dma_buf - * - * internally used buffer structure to describe a queued or running - * buffer. -*/ - -struct s3c2410_dma_buf { - struct s3c2410_dma_buf *next; - int magic; /* magic */ - int size; /* buffer size in bytes */ - dma_addr_t data; /* start of DMA data */ - dma_addr_t ptr; /* where the DMA got to [1] */ - void *id; /* client's id */ -}; - -/* [1] is this updated for both recv/send modes? */ - -struct s3c2410_dma_stats { - unsigned long loads; - unsigned long timeout_longest; - unsigned long timeout_shortest; - unsigned long timeout_avg; - unsigned long timeout_failed; -}; - -struct s3c2410_dma_map; - -/* struct s3c2410_dma_chan - * - * full state information for each DMA channel -*/ - -struct s3c2410_dma_chan { - /* channel state flags and information */ - unsigned char number; /* number of this dma channel */ - unsigned char in_use; /* channel allocated */ - unsigned char irq_claimed; /* irq claimed for channel */ - unsigned char irq_enabled; /* irq enabled for channel */ - unsigned char xfer_unit; /* size of an transfer */ - - /* channel state */ - - enum s3c2410_dma_state state; - enum s3c2410_dma_loadst load_state; - struct s3c2410_dma_client *client; - - /* channel configuration */ - enum dma_data_direction source; - enum dma_ch req_ch; - unsigned long dev_addr; - unsigned long load_timeout; - unsigned int flags; /* channel flags */ - - struct s3c24xx_dma_map *map; /* channel hw maps */ - - /* channel's hardware position and configuration */ - void __iomem *regs; /* channels registers */ - void __iomem *addr_reg; /* data address register */ - unsigned int irq; /* channel irq */ - unsigned long dcon; /* default value of DCON */ - - /* driver handles */ - s3c2410_dma_cbfn_t callback_fn; /* buffer done callback */ - s3c2410_dma_opfn_t op_fn; /* channel op callback */ - - /* stats gathering */ - struct s3c2410_dma_stats *stats; - struct s3c2410_dma_stats stats_store; - - /* buffer list and information */ - struct s3c2410_dma_buf *curr; /* current dma buffer */ - struct s3c2410_dma_buf *next; /* next buffer to load */ - struct s3c2410_dma_buf *end; /* end of queue */ - - /* system device */ - struct device dev; -}; - -typedef unsigned long dma_device_t; - -#endif /* __ASM_ARCH_DMA_H */ diff --git a/arch/arm/mach-s3c2410/include/mach/entry-macro.S b/arch/arm/mach-s3c2410/include/mach/entry-macro.S deleted file mode 100644 index 473b3cd37d9b..000000000000 --- a/arch/arm/mach-s3c2410/include/mach/entry-macro.S +++ /dev/null @@ -1,78 +0,0 @@ -/* - * arch/arm/mach-s3c2410/include/mach/entry-macro.S - * - * Low-level IRQ helper macros for S3C2410-based platforms - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. -*/ - -/* We have a problem that the INTOFFSET register does not always - * show one interrupt. Occasionally we get two interrupts through - * the prioritiser, and this causes the INTOFFSET register to show - * what looks like the logical-or of the two interrupt numbers. - * - * Thanks to Klaus, Shannon, et al for helping to debug this problem -*/ - -#define INTPND (0x10) -#define INTOFFSET (0x14) - -#include -#include - - .macro get_irqnr_preamble, base, tmp - .endm - - .macro arch_ret_to_user, tmp1, tmp2 - .endm - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - - mov \base, #S3C24XX_VA_IRQ - - @@ try the interrupt offset register, since it is there - - ldr \irqstat, [ \base, #INTPND ] - teq \irqstat, #0 - beq 1002f - ldr \irqnr, [ \base, #INTOFFSET ] - mov \tmp, #1 - tst \irqstat, \tmp, lsl \irqnr - bne 1001f - - @@ the number specified is not a valid irq, so try - @@ and work it out for ourselves - - mov \irqnr, #0 @@ start here - - @@ work out which irq (if any) we got - - movs \tmp, \irqstat, lsl#16 - addeq \irqnr, \irqnr, #16 - moveq \irqstat, \irqstat, lsr#16 - tst \irqstat, #0xff - addeq \irqnr, \irqnr, #8 - moveq \irqstat, \irqstat, lsr#8 - tst \irqstat, #0xf - addeq \irqnr, \irqnr, #4 - moveq \irqstat, \irqstat, lsr#4 - tst \irqstat, #0x3 - addeq \irqnr, \irqnr, #2 - moveq \irqstat, \irqstat, lsr#2 - tst \irqstat, #0x1 - addeq \irqnr, \irqnr, #1 - - @@ we have the value -1001: - adds \irqnr, \irqnr, #IRQ_EINT0 -1002: - @@ exit here, Z flag unset if IRQ - - .endm - - /* currently don't need an disable_fiq macro */ - - .macro disable_fiq - .endm diff --git a/arch/arm/mach-s3c2410/include/mach/fb.h b/arch/arm/mach-s3c2410/include/mach/fb.h deleted file mode 100644 index a957bc8ed44f..000000000000 --- a/arch/arm/mach-s3c2410/include/mach/fb.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/arm/mach-s3c2410/include/mach/gpio-fns.h b/arch/arm/mach-s3c2410/include/mach/gpio-fns.h deleted file mode 100644 index c53ad34c6579..000000000000 --- a/arch/arm/mach-s3c2410/include/mach/gpio-fns.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/arm/mach-s3c2410/include/mach/gpio-nrs.h b/arch/arm/mach-s3c2410/include/mach/gpio-nrs.h deleted file mode 100644 index 019ea86057f6..000000000000 --- a/arch/arm/mach-s3c2410/include/mach/gpio-nrs.h +++ /dev/null @@ -1,118 +0,0 @@ -/* arch/arm/mach-s3c2410/include/mach/gpio-nrs.h - * - * Copyright (c) 2008 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks - * - * S3C2410 - GPIO bank numbering - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __MACH_GPIONRS_H -#define __MACH_GPIONRS_H - -#define S3C2410_GPIONO(bank,offset) ((bank) + (offset)) - -#define S3C2410_GPIO_BANKG (32*6) -#define S3C2410_GPIO_BANKH (32*7) - -/* GPIO sizes for various SoCs: - * - * 2442 - * 2410 2412 2440 2443 2416 - * ---- ---- ---- ---- ---- - * A 23 22 25 16 25 - * B 11 11 11 11 9 - * C 16 15 16 16 16 - * D 16 16 16 16 16 - * E 16 16 16 16 16 - * F 8 8 8 8 8 - * G 16 16 16 16 8 - * H 11 11 9 15 15 - * J -- -- 13 16 -- - * K -- -- -- -- 16 - * L -- -- -- 15 7 - * M -- -- -- 2 2 - */ - -/* GPIO bank sizes */ -#define S3C2410_GPIO_A_NR (32) -#define S3C2410_GPIO_B_NR (32) -#define S3C2410_GPIO_C_NR (32) -#define S3C2410_GPIO_D_NR (32) -#define S3C2410_GPIO_E_NR (32) -#define S3C2410_GPIO_F_NR (32) -#define S3C2410_GPIO_G_NR (32) -#define S3C2410_GPIO_H_NR (32) -#define S3C2410_GPIO_J_NR (32) /* technically 16. */ -#define S3C2410_GPIO_K_NR (32) /* technically 16. */ -#define S3C2410_GPIO_L_NR (32) /* technically 15. */ -#define S3C2410_GPIO_M_NR (32) /* technically 2. */ - -#if CONFIG_S3C_GPIO_SPACE != 0 -#error CONFIG_S3C_GPIO_SPACE cannot be nonzero at the moment -#endif - -#define S3C2410_GPIO_NEXT(__gpio) \ - ((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 0) - -#ifndef __ASSEMBLY__ - -enum s3c_gpio_number { - S3C2410_GPIO_A_START = 0, - S3C2410_GPIO_B_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_A), - S3C2410_GPIO_C_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_B), - S3C2410_GPIO_D_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_C), - S3C2410_GPIO_E_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_D), - S3C2410_GPIO_F_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_E), - S3C2410_GPIO_G_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_F), - S3C2410_GPIO_H_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_G), - S3C2410_GPIO_J_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_H), - S3C2410_GPIO_K_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_J), - S3C2410_GPIO_L_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_K), - S3C2410_GPIO_M_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_L), -}; - -#endif /* __ASSEMBLY__ */ - -/* S3C2410 GPIO number definitions. */ - -#define S3C2410_GPA(_nr) (S3C2410_GPIO_A_START + (_nr)) -#define S3C2410_GPB(_nr) (S3C2410_GPIO_B_START + (_nr)) -#define S3C2410_GPC(_nr) (S3C2410_GPIO_C_START + (_nr)) -#define S3C2410_GPD(_nr) (S3C2410_GPIO_D_START + (_nr)) -#define S3C2410_GPE(_nr) (S3C2410_GPIO_E_START + (_nr)) -#define S3C2410_GPF(_nr) (S3C2410_GPIO_F_START + (_nr)) -#define S3C2410_GPG(_nr) (S3C2410_GPIO_G_START + (_nr)) -#define S3C2410_GPH(_nr) (S3C2410_GPIO_H_START + (_nr)) -#define S3C2410_GPJ(_nr) (S3C2410_GPIO_J_START + (_nr)) -#define S3C2410_GPK(_nr) (S3C2410_GPIO_K_START + (_nr)) -#define S3C2410_GPL(_nr) (S3C2410_GPIO_L_START + (_nr)) -#define S3C2410_GPM(_nr) (S3C2410_GPIO_M_START + (_nr)) - -/* compatibility until drivers can be modified */ - -#define S3C2410_GPA0 S3C2410_GPA(0) -#define S3C2410_GPA1 S3C2410_GPA(1) -#define S3C2410_GPA3 S3C2410_GPA(3) -#define S3C2410_GPA7 S3C2410_GPA(7) - -#define S3C2410_GPE0 S3C2410_GPE(0) -#define S3C2410_GPE1 S3C2410_GPE(1) -#define S3C2410_GPE2 S3C2410_GPE(2) -#define S3C2410_GPE3 S3C2410_GPE(3) -#define S3C2410_GPE4 S3C2410_GPE(4) -#define S3C2410_GPE5 S3C2410_GPE(5) -#define S3C2410_GPE6 S3C2410_GPE(6) -#define S3C2410_GPE7 S3C2410_GPE(7) -#define S3C2410_GPE8 S3C2410_GPE(8) -#define S3C2410_GPE9 S3C2410_GPE(9) -#define S3C2410_GPE10 S3C2410_GPE(10) - -#define S3C2410_GPH10 S3C2410_GPH(10) - -#endif /* __MACH_GPIONRS_H */ - diff --git a/arch/arm/mach-s3c2410/include/mach/gpio-track.h b/arch/arm/mach-s3c2410/include/mach/gpio-track.h deleted file mode 100644 index c410a078622c..000000000000 --- a/arch/arm/mach-s3c2410/include/mach/gpio-track.h +++ /dev/null @@ -1,33 +0,0 @@ -/* arch/arm/mach-s3c24100/include/mach/gpio-core.h - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks - * http://armlinux.simtec.co.uk/ - * - * S3C2410 - GPIO core support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_GPIO_CORE_H -#define __ASM_ARCH_GPIO_CORE_H __FILE__ - -#include - -extern struct samsung_gpio_chip s3c24xx_gpios[]; - -static inline struct samsung_gpio_chip *samsung_gpiolib_getchip(unsigned int pin) -{ - struct samsung_gpio_chip *chip; - - if (pin > S3C_GPIO_END) - return NULL; - - chip = &s3c24xx_gpios[pin/32]; - return ((pin - chip->chip.base) < chip->chip.ngpio) ? chip : NULL; -} - -#endif /* __ASM_ARCH_GPIO_CORE_H */ diff --git a/arch/arm/mach-s3c2410/include/mach/gpio.h b/arch/arm/mach-s3c2410/include/mach/gpio.h deleted file mode 100644 index 6fac70f3484e..000000000000 --- a/arch/arm/mach-s3c2410/include/mach/gpio.h +++ /dev/null @@ -1,35 +0,0 @@ -/* arch/arm/mach-s3c2410/include/mach/gpio.h - * - * Copyright (c) 2008 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks - * - * S3C2410 - GPIO lib support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -/* some boards require extra gpio capacity to support external - * devices that need GPIO. - */ - -#ifdef CONFIG_CPU_S3C244X -#define ARCH_NR_GPIOS (32 * 9 + CONFIG_S3C24XX_GPIO_EXTRA) -#elif defined(CONFIG_CPU_S3C2443) || defined(CONFIG_CPU_S3C2416) -#define ARCH_NR_GPIOS (32 * 12 + CONFIG_S3C24XX_GPIO_EXTRA) -#else -#define ARCH_NR_GPIOS (256 + CONFIG_S3C24XX_GPIO_EXTRA) -#endif - -#include -#include - -#ifdef CONFIG_CPU_S3C244X -#define S3C_GPIO_END (S3C2410_GPJ(0) + 32) -#elif defined(CONFIG_CPU_S3C2443) || defined(CONFIG_CPU_S3C2416) -#define S3C_GPIO_END (S3C2410_GPM(0) + 32) -#else -#define S3C_GPIO_END (S3C2410_GPH(0) + 32) -#endif diff --git a/arch/arm/mach-s3c2410/include/mach/h1940-latch.h b/arch/arm/mach-s3c2410/include/mach/h1940-latch.h deleted file mode 100644 index fc897d3a056c..000000000000 --- a/arch/arm/mach-s3c2410/include/mach/h1940-latch.h +++ /dev/null @@ -1,43 +0,0 @@ -/* arch/arm/mach-s3c2410/include/mach/h1940-latch.h - * - * Copyright (c) 2005 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks - * - * iPAQ H1940 series - latch definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_H1940_LATCH_H -#define __ASM_ARCH_H1940_LATCH_H - -#include - -#define H1940_LATCH_GPIO(x) (S3C_GPIO_END + (x)) - -/* SD layer latch */ - -#define H1940_LATCH_LCD_P0 H1940_LATCH_GPIO(0) -#define H1940_LATCH_LCD_P1 H1940_LATCH_GPIO(1) -#define H1940_LATCH_LCD_P2 H1940_LATCH_GPIO(2) -#define H1940_LATCH_LCD_P3 H1940_LATCH_GPIO(3) -#define H1940_LATCH_MAX1698_nSHUTDOWN H1940_LATCH_GPIO(4) -#define H1940_LATCH_LED_RED H1940_LATCH_GPIO(5) -#define H1940_LATCH_SDQ7 H1940_LATCH_GPIO(6) -#define H1940_LATCH_USB_DP H1940_LATCH_GPIO(7) - -/* CPU layer latch */ - -#define H1940_LATCH_UDA_POWER H1940_LATCH_GPIO(8) -#define H1940_LATCH_AUDIO_POWER H1940_LATCH_GPIO(9) -#define H1940_LATCH_SM803_ENABLE H1940_LATCH_GPIO(10) -#define H1940_LATCH_LCD_P4 H1940_LATCH_GPIO(11) -#define H1940_LATCH_SD_POWER H1940_LATCH_GPIO(12) -#define H1940_LATCH_BLUETOOTH_POWER H1940_LATCH_GPIO(13) -#define H1940_LATCH_LED_GREEN H1940_LATCH_GPIO(14) -#define H1940_LATCH_LED_FLASH H1940_LATCH_GPIO(15) - -#endif /* __ASM_ARCH_H1940_LATCH_H */ diff --git a/arch/arm/mach-s3c2410/include/mach/h1940.h b/arch/arm/mach-s3c2410/include/mach/h1940.h deleted file mode 100644 index 2aa683c8d3d6..000000000000 --- a/arch/arm/mach-s3c2410/include/mach/h1940.h +++ /dev/null @@ -1,24 +0,0 @@ -/* arch/arm/mach-s3c2410/include/mach/h1940.h - * - * Copyright 2006 Ben Dooks - * - * H1940 definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_H1940_H -#define __ASM_ARCH_H1940_H - -#define H1940_SUSPEND_CHECKSUM (0x30003ff8) -#define H1940_SUSPEND_RESUMEAT (0x30081000) -#define H1940_SUSPEND_CHECK (0x30080000) - -extern void h1940_pm_return(void); -extern int h1940_led_blink_set(unsigned gpio, int state, - unsigned long *delay_on, unsigned long *delay_off); - - -#endif /* __ASM_ARCH_H1940_H */ diff --git a/arch/arm/mach-s3c2410/include/mach/hardware.h b/arch/arm/mach-s3c2410/include/mach/hardware.h deleted file mode 100644 index aef5631eac58..000000000000 --- a/arch/arm/mach-s3c2410/include/mach/hardware.h +++ /dev/null @@ -1,42 +0,0 @@ -/* arch/arm/mach-s3c2410/include/mach/hardware.h - * - * Copyright (c) 2003 Simtec Electronics - * Ben Dooks - * - * S3C2410 - hardware - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_HARDWARE_H -#define __ASM_ARCH_HARDWARE_H - -#ifndef __ASSEMBLY__ - -extern unsigned int s3c2410_modify_misccr(unsigned int clr, unsigned int chg); - -#ifdef CONFIG_CPU_S3C2440 - -extern int s3c2440_set_dsc(unsigned int pin, unsigned int value); - -#endif /* CONFIG_CPU_S3C2440 */ - -#ifdef CONFIG_CPU_S3C2412 - -extern int s3c2412_gpio_set_sleepcfg(unsigned int pin, unsigned int state); - -#endif /* CONFIG_CPU_S3C2412 */ - -#endif /* __ASSEMBLY__ */ - -#include -#include - -/* machine specific hardware definitions should go after this */ - -/* currently here until moved into config (todo) */ -#define CONFIG_NO_MULTIWORD_IO - -#endif /* __ASM_ARCH_HARDWARE_H */ diff --git a/arch/arm/mach-s3c2410/include/mach/idle.h b/arch/arm/mach-s3c2410/include/mach/idle.h deleted file mode 100644 index e9ddd706b16e..000000000000 --- a/arch/arm/mach-s3c2410/include/mach/idle.h +++ /dev/null @@ -1,24 +0,0 @@ -/* arch/arm/mach-s3c2410/include/mach/idle.h - * - * Copyright (c) 2004 Simtec Electronics - * http://www.simtec.co.uk/products/SWLINUX/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * S3C2410 CPU Idle controls -*/ - -#ifndef __ASM_ARCH_IDLE_H -#define __ASM_ARCH_IDLE_H __FILE__ - -/* This allows the over-ride of the default idle code, in case there - * is any other things to be done over idle (like DVS) -*/ - -extern void (*s3c24xx_idle)(void); - -extern void s3c24xx_default_idle(void); - -#endif /* __ASM_ARCH_IDLE_H */ diff --git a/arch/arm/mach-s3c2410/include/mach/io.h b/arch/arm/mach-s3c2410/include/mach/io.h deleted file mode 100644 index 118749f37c4c..000000000000 --- a/arch/arm/mach-s3c2410/include/mach/io.h +++ /dev/null @@ -1,216 +0,0 @@ -/* - * arch/arm/mach-s3c2410/include/mach/io.h - * from arch/arm/mach-rpc/include/mach/io.h - * - * Copyright (C) 1997 Russell King - * (C) 2003 Simtec Electronics -*/ - -#ifndef __ASM_ARM_ARCH_IO_H -#define __ASM_ARM_ARCH_IO_H - -#include - -#define IO_SPACE_LIMIT 0xffffffff - -/* - * We use two different types of addressing - PC style addresses, and ARM - * addresses. PC style accesses the PC hardware with the normal PC IO - * addresses, eg 0x3f8 for serial#1. ARM addresses are above A28 - * and are translated to the start of IO. Note that all addresses are - * not shifted left! - */ - -#define __PORT_PCIO(x) ((x) < (1<<28)) - -#define PCIO_BASE (S3C24XX_VA_ISA_WORD) -#define PCIO_BASE_b (S3C24XX_VA_ISA_BYTE) -#define PCIO_BASE_w (S3C24XX_VA_ISA_WORD) -#define PCIO_BASE_l (S3C24XX_VA_ISA_WORD) -/* - * Dynamic IO functions - let the compiler - * optimize the expressions - */ - -#define DECLARE_DYN_OUT(sz,fnsuffix,instr) \ -static inline void __out##fnsuffix (unsigned int val, unsigned int port) \ -{ \ - unsigned long temp; \ - __asm__ __volatile__( \ - "cmp %2, #(1<<28)\n\t" \ - "mov %0, %2\n\t" \ - "addcc %0, %0, %3\n\t" \ - "str" instr " %1, [%0, #0 ] @ out" #fnsuffix \ - : "=&r" (temp) \ - : "r" (val), "r" (port), "Ir" (PCIO_BASE_##fnsuffix) \ - : "cc"); \ -} - - -#define DECLARE_DYN_IN(sz,fnsuffix,instr) \ -static inline unsigned sz __in##fnsuffix (unsigned int port) \ -{ \ - unsigned long temp, value; \ - __asm__ __volatile__( \ - "cmp %2, #(1<<28)\n\t" \ - "mov %0, %2\n\t" \ - "addcc %0, %0, %3\n\t" \ - "ldr" instr " %1, [%0, #0 ] @ in" #fnsuffix \ - : "=&r" (temp), "=r" (value) \ - : "r" (port), "Ir" (PCIO_BASE_##fnsuffix) \ - : "cc"); \ - return (unsigned sz)value; \ -} - -static inline void __iomem *__ioaddr (unsigned long port) -{ - return __PORT_PCIO(port) ? (PCIO_BASE + port) : (void __iomem *)port; -} - -#define DECLARE_IO(sz,fnsuffix,instr) \ - DECLARE_DYN_IN(sz,fnsuffix,instr) \ - DECLARE_DYN_OUT(sz,fnsuffix,instr) - -DECLARE_IO(char,b,"b") -DECLARE_IO(short,w,"h") -DECLARE_IO(int,l,"") - -#undef DECLARE_IO -#undef DECLARE_DYN_IN - -/* - * Constant address IO functions - * - * These have to be macros for the 'J' constraint to work - - * +/-4096 immediate operand. - */ -#define __outbc(value,port) \ -({ \ - if (__PORT_PCIO((port))) \ - __asm__ __volatile__( \ - "strb %0, [%1, %2] @ outbc" \ - : : "r" (value), "r" (PCIO_BASE), "Jr" ((port))); \ - else \ - __asm__ __volatile__( \ - "strb %0, [%1, #0] @ outbc" \ - : : "r" (value), "r" ((port))); \ -}) - -#define __inbc(port) \ -({ \ - unsigned char result; \ - if (__PORT_PCIO((port))) \ - __asm__ __volatile__( \ - "ldrb %0, [%1, %2] @ inbc" \ - : "=r" (result) : "r" (PCIO_BASE), "Jr" ((port))); \ - else \ - __asm__ __volatile__( \ - "ldrb %0, [%1, #0] @ inbc" \ - : "=r" (result) : "r" ((port))); \ - result; \ -}) - -#define __outwc(value,port) \ -({ \ - unsigned long v = value; \ - if (__PORT_PCIO((port))) { \ - if ((port) < 256 && (port) > -256) \ - __asm__ __volatile__( \ - "strh %0, [%1, %2] @ outwc" \ - : : "r" (v), "r" (PCIO_BASE), "Jr" ((port))); \ - else if ((port) > 0) \ - __asm__ __volatile__( \ - "strh %0, [%1, %2] @ outwc" \ - : : "r" (v), \ - "r" (PCIO_BASE + ((port) & ~0xff)), \ - "Jr" (((port) & 0xff))); \ - else \ - __asm__ __volatile__( \ - "strh %0, [%1, #0] @ outwc" \ - : : "r" (v), \ - "r" (PCIO_BASE + (port))); \ - } else \ - __asm__ __volatile__( \ - "strh %0, [%1, #0] @ outwc" \ - : : "r" (v), "r" ((port))); \ -}) - -#define __inwc(port) \ -({ \ - unsigned short result; \ - if (__PORT_PCIO((port))) { \ - if ((port) < 256 && (port) > -256 ) \ - __asm__ __volatile__( \ - "ldrh %0, [%1, %2] @ inwc" \ - : "=r" (result) \ - : "r" (PCIO_BASE), \ - "Jr" ((port))); \ - else if ((port) > 0) \ - __asm__ __volatile__( \ - "ldrh %0, [%1, %2] @ inwc" \ - : "=r" (result) \ - : "r" (PCIO_BASE + ((port) & ~0xff)), \ - "Jr" (((port) & 0xff))); \ - else \ - __asm__ __volatile__( \ - "ldrh %0, [%1, #0] @ inwc" \ - : "=r" (result) \ - : "r" (PCIO_BASE + ((port)))); \ - } else \ - __asm__ __volatile__( \ - "ldrh %0, [%1, #0] @ inwc" \ - : "=r" (result) : "r" ((port))); \ - result; \ -}) - -#define __outlc(value,port) \ -({ \ - unsigned long v = value; \ - if (__PORT_PCIO((port))) \ - __asm__ __volatile__( \ - "str %0, [%1, %2] @ outlc" \ - : : "r" (v), "r" (PCIO_BASE), "Jr" ((port))); \ - else \ - __asm__ __volatile__( \ - "str %0, [%1, #0] @ outlc" \ - : : "r" (v), "r" ((port))); \ -}) - -#define __inlc(port) \ -({ \ - unsigned long result; \ - if (__PORT_PCIO((port))) \ - __asm__ __volatile__( \ - "ldr %0, [%1, %2] @ inlc" \ - : "=r" (result) : "r" (PCIO_BASE), "Jr" ((port))); \ - else \ - __asm__ __volatile__( \ - "ldr %0, [%1, #0] @ inlc" \ - : "=r" (result) : "r" ((port))); \ - result; \ -}) - -#define __ioaddrc(port) ((__PORT_PCIO(port) ? PCIO_BASE + (port) : (void __iomem *)(port))) - -#define inb(p) (__builtin_constant_p((p)) ? __inbc(p) : __inb(p)) -#define inw(p) (__builtin_constant_p((p)) ? __inwc(p) : __inw(p)) -#define inl(p) (__builtin_constant_p((p)) ? __inlc(p) : __inl(p)) -#define outb(v,p) (__builtin_constant_p((p)) ? __outbc(v,p) : __outb(v,p)) -#define outw(v,p) (__builtin_constant_p((p)) ? __outwc(v,p) : __outw(v,p)) -#define outl(v,p) (__builtin_constant_p((p)) ? __outlc(v,p) : __outl(v,p)) -#define __ioaddr(p) (__builtin_constant_p((p)) ? __ioaddr(p) : __ioaddrc(p)) - -#define insb(p,d,l) __raw_readsb(__ioaddr(p),d,l) -#define insw(p,d,l) __raw_readsw(__ioaddr(p),d,l) -#define insl(p,d,l) __raw_readsl(__ioaddr(p),d,l) - -#define outsb(p,d,l) __raw_writesb(__ioaddr(p),d,l) -#define outsw(p,d,l) __raw_writesw(__ioaddr(p),d,l) -#define outsl(p,d,l) __raw_writesl(__ioaddr(p),d,l) - -/* - * 1:1 mapping for ioremapped regions. - */ -#define __mem_pci(x) (x) - -#endif diff --git a/arch/arm/mach-s3c2410/include/mach/irqs.h b/arch/arm/mach-s3c2410/include/mach/irqs.h deleted file mode 100644 index e53b2177319e..000000000000 --- a/arch/arm/mach-s3c2410/include/mach/irqs.h +++ /dev/null @@ -1,202 +0,0 @@ -/* arch/arm/mach-s3c2410/include/mach/irqs.h - * - * Copyright (c) 2003-2005 Simtec Electronics - * Ben Dooks - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - - -#ifndef __ASM_ARCH_IRQS_H -#define __ASM_ARCH_IRQS_H __FILE__ - -/* we keep the first set of CPU IRQs out of the range of - * the ISA space, so that the PC104 has them to itself - * and we don't end up having to do horrible things to the - * standard ISA drivers.... - */ - -#define S3C2410_CPUIRQ_OFFSET (16) - -#define S3C2410_IRQ(x) ((x) + S3C2410_CPUIRQ_OFFSET) - -/* main cpu interrupts */ -#define IRQ_EINT0 S3C2410_IRQ(0) /* 16 */ -#define IRQ_EINT1 S3C2410_IRQ(1) -#define IRQ_EINT2 S3C2410_IRQ(2) -#define IRQ_EINT3 S3C2410_IRQ(3) -#define IRQ_EINT4t7 S3C2410_IRQ(4) /* 20 */ -#define IRQ_EINT8t23 S3C2410_IRQ(5) -#define IRQ_RESERVED6 S3C2410_IRQ(6) /* for s3c2410 */ -#define IRQ_CAM S3C2410_IRQ(6) /* for s3c2440,s3c2443 */ -#define IRQ_BATT_FLT S3C2410_IRQ(7) -#define IRQ_TICK S3C2410_IRQ(8) /* 24 */ -#define IRQ_WDT S3C2410_IRQ(9) /* WDT/AC97 for s3c2443 */ -#define IRQ_TIMER0 S3C2410_IRQ(10) -#define IRQ_TIMER1 S3C2410_IRQ(11) -#define IRQ_TIMER2 S3C2410_IRQ(12) -#define IRQ_TIMER3 S3C2410_IRQ(13) -#define IRQ_TIMER4 S3C2410_IRQ(14) -#define IRQ_UART2 S3C2410_IRQ(15) -#define IRQ_LCD S3C2410_IRQ(16) /* 32 */ -#define IRQ_DMA0 S3C2410_IRQ(17) /* IRQ_DMA for s3c2443 */ -#define IRQ_DMA1 S3C2410_IRQ(18) -#define IRQ_DMA2 S3C2410_IRQ(19) -#define IRQ_DMA3 S3C2410_IRQ(20) -#define IRQ_SDI S3C2410_IRQ(21) -#define IRQ_SPI0 S3C2410_IRQ(22) -#define IRQ_UART1 S3C2410_IRQ(23) -#define IRQ_RESERVED24 S3C2410_IRQ(24) /* 40 */ -#define IRQ_NFCON S3C2410_IRQ(24) /* for s3c2440 */ -#define IRQ_USBD S3C2410_IRQ(25) -#define IRQ_USBH S3C2410_IRQ(26) -#define IRQ_IIC S3C2410_IRQ(27) -#define IRQ_UART0 S3C2410_IRQ(28) /* 44 */ -#define IRQ_SPI1 S3C2410_IRQ(29) -#define IRQ_RTC S3C2410_IRQ(30) -#define IRQ_ADCPARENT S3C2410_IRQ(31) - -/* interrupts generated from the external interrupts sources */ -#define IRQ_EINT4 S3C2410_IRQ(32) /* 48 */ -#define IRQ_EINT5 S3C2410_IRQ(33) -#define IRQ_EINT6 S3C2410_IRQ(34) -#define IRQ_EINT7 S3C2410_IRQ(35) -#define IRQ_EINT8 S3C2410_IRQ(36) -#define IRQ_EINT9 S3C2410_IRQ(37) -#define IRQ_EINT10 S3C2410_IRQ(38) -#define IRQ_EINT11 S3C2410_IRQ(39) -#define IRQ_EINT12 S3C2410_IRQ(40) -#define IRQ_EINT13 S3C2410_IRQ(41) -#define IRQ_EINT14 S3C2410_IRQ(42) -#define IRQ_EINT15 S3C2410_IRQ(43) -#define IRQ_EINT16 S3C2410_IRQ(44) -#define IRQ_EINT17 S3C2410_IRQ(45) -#define IRQ_EINT18 S3C2410_IRQ(46) -#define IRQ_EINT19 S3C2410_IRQ(47) -#define IRQ_EINT20 S3C2410_IRQ(48) /* 64 */ -#define IRQ_EINT21 S3C2410_IRQ(49) -#define IRQ_EINT22 S3C2410_IRQ(50) -#define IRQ_EINT23 S3C2410_IRQ(51) - -#define IRQ_EINT_BIT(x) ((x) - IRQ_EINT4 + 4) -#define IRQ_EINT(x) (((x) >= 4) ? (IRQ_EINT4 + (x) - 4) : (IRQ_EINT0 + (x))) - -#define IRQ_LCD_FIFO S3C2410_IRQ(52) -#define IRQ_LCD_FRAME S3C2410_IRQ(53) - -/* IRQs for the interal UARTs, and ADC - * these need to be ordered in number of appearance in the - * SUBSRC mask register -*/ - -#define S3C2410_IRQSUB(x) S3C2410_IRQ((x)+54) - -#define IRQ_S3CUART_RX0 S3C2410_IRQSUB(0) /* 70 */ -#define IRQ_S3CUART_TX0 S3C2410_IRQSUB(1) -#define IRQ_S3CUART_ERR0 S3C2410_IRQSUB(2) - -#define IRQ_S3CUART_RX1 S3C2410_IRQSUB(3) /* 73 */ -#define IRQ_S3CUART_TX1 S3C2410_IRQSUB(4) -#define IRQ_S3CUART_ERR1 S3C2410_IRQSUB(5) - -#define IRQ_S3CUART_RX2 S3C2410_IRQSUB(6) /* 76 */ -#define IRQ_S3CUART_TX2 S3C2410_IRQSUB(7) -#define IRQ_S3CUART_ERR2 S3C2410_IRQSUB(8) - -#define IRQ_TC S3C2410_IRQSUB(9) -#define IRQ_ADC S3C2410_IRQSUB(10) - -/* extra irqs for s3c2412 */ - -#define IRQ_S3C2412_CFSDI S3C2410_IRQ(21) - -#define IRQ_S3C2412_SDI S3C2410_IRQSUB(13) -#define IRQ_S3C2412_CF S3C2410_IRQSUB(14) - - -#define IRQ_S3C2416_EINT8t15 S3C2410_IRQ(5) -#define IRQ_S3C2416_DMA S3C2410_IRQ(17) -#define IRQ_S3C2416_UART3 S3C2410_IRQ(18) -#define IRQ_S3C2416_SDI1 S3C2410_IRQ(20) -#define IRQ_S3C2416_SDI0 S3C2410_IRQ(21) - -#define IRQ_S3C2416_LCD2 S3C2410_IRQSUB(15) -#define IRQ_S3C2416_LCD3 S3C2410_IRQSUB(16) -#define IRQ_S3C2416_LCD4 S3C2410_IRQSUB(17) -#define IRQ_S3C2416_DMA0 S3C2410_IRQSUB(18) -#define IRQ_S3C2416_DMA1 S3C2410_IRQSUB(19) -#define IRQ_S3C2416_DMA2 S3C2410_IRQSUB(20) -#define IRQ_S3C2416_DMA3 S3C2410_IRQSUB(21) -#define IRQ_S3C2416_DMA4 S3C2410_IRQSUB(22) -#define IRQ_S3C2416_DMA5 S3C2410_IRQSUB(23) -#define IRQ_S32416_WDT S3C2410_IRQSUB(27) -#define IRQ_S32416_AC97 S3C2410_IRQSUB(28) - - -/* extra irqs for s3c2440 */ - -#define IRQ_S3C2440_CAM_C S3C2410_IRQSUB(11) /* S3C2443 too */ -#define IRQ_S3C2440_CAM_P S3C2410_IRQSUB(12) /* S3C2443 too */ -#define IRQ_S3C2440_WDT S3C2410_IRQSUB(13) -#define IRQ_S3C2440_AC97 S3C2410_IRQSUB(14) - -/* irqs for s3c2443 */ - -#define IRQ_S3C2443_DMA S3C2410_IRQ(17) /* IRQ_DMA1 */ -#define IRQ_S3C2443_UART3 S3C2410_IRQ(18) /* IRQ_DMA2 */ -#define IRQ_S3C2443_CFCON S3C2410_IRQ(19) /* IRQ_DMA3 */ -#define IRQ_S3C2443_HSMMC S3C2410_IRQ(20) /* IRQ_SDI */ -#define IRQ_S3C2443_NAND S3C2410_IRQ(24) /* reserved */ - -#define IRQ_S3C2416_HSMMC0 S3C2410_IRQ(21) /* S3C2416/S3C2450 */ - -#define IRQ_HSMMC0 IRQ_S3C2416_HSMMC0 -#define IRQ_HSMMC1 IRQ_S3C2443_HSMMC - -#define IRQ_S3C2443_LCD1 S3C2410_IRQSUB(14) -#define IRQ_S3C2443_LCD2 S3C2410_IRQSUB(15) -#define IRQ_S3C2443_LCD3 S3C2410_IRQSUB(16) -#define IRQ_S3C2443_LCD4 S3C2410_IRQSUB(17) - -#define IRQ_S3C2443_DMA0 S3C2410_IRQSUB(18) -#define IRQ_S3C2443_DMA1 S3C2410_IRQSUB(19) -#define IRQ_S3C2443_DMA2 S3C2410_IRQSUB(20) -#define IRQ_S3C2443_DMA3 S3C2410_IRQSUB(21) -#define IRQ_S3C2443_DMA4 S3C2410_IRQSUB(22) -#define IRQ_S3C2443_DMA5 S3C2410_IRQSUB(23) - -/* UART3 */ -#define IRQ_S3C2443_RX3 S3C2410_IRQSUB(24) -#define IRQ_S3C2443_TX3 S3C2410_IRQSUB(25) -#define IRQ_S3C2443_ERR3 S3C2410_IRQSUB(26) - -#define IRQ_S3C2443_WDT S3C2410_IRQSUB(27) -#define IRQ_S3C2443_AC97 S3C2410_IRQSUB(28) - -#if defined(CONFIG_CPU_S3C2443) || defined(CONFIG_CPU_S3C2416) -#define NR_IRQS (IRQ_S3C2443_AC97+1) -#else -#define NR_IRQS (IRQ_S3C2440_AC97+1) -#endif - -/* compatibility define. */ -#define IRQ_UART3 IRQ_S3C2443_UART3 -#define IRQ_S3CUART_RX3 IRQ_S3C2443_RX3 -#define IRQ_S3CUART_TX3 IRQ_S3C2443_TX3 -#define IRQ_S3CUART_ERR3 IRQ_S3C2443_ERR3 - -#define IRQ_LCD_VSYNC IRQ_S3C2443_LCD3 -#define IRQ_LCD_SYSTEM IRQ_S3C2443_LCD2 - -#ifdef CONFIG_CPU_S3C2440 -#define IRQ_S3C244X_AC97 IRQ_S3C2440_AC97 -#else -#define IRQ_S3C244X_AC97 IRQ_S3C2443_AC97 -#endif - -/* Our FIQs are routable from IRQ_EINT0 to IRQ_ADCPARENT */ -#define FIQ_START IRQ_EINT0 - -#endif /* __ASM_ARCH_IRQ_H */ diff --git a/arch/arm/mach-s3c2410/include/mach/leds-gpio.h b/arch/arm/mach-s3c2410/include/mach/leds-gpio.h deleted file mode 100644 index d8a7672519b6..000000000000 --- a/arch/arm/mach-s3c2410/include/mach/leds-gpio.h +++ /dev/null @@ -1,28 +0,0 @@ -/* arch/arm/mach-s3c2410/include/mach/leds-gpio.h - * - * Copyright (c) 2006 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks - * - * S3C24XX - LEDs GPIO connector - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_LEDSGPIO_H -#define __ASM_ARCH_LEDSGPIO_H "leds-gpio.h" - -#define S3C24XX_LEDF_ACTLOW (1<<0) /* LED is on when GPIO low */ -#define S3C24XX_LEDF_TRISTATE (1<<1) /* tristate to turn off */ - -struct s3c24xx_led_platdata { - unsigned int gpio; - unsigned int flags; - - char *name; - char *def_trigger; -}; - -#endif /* __ASM_ARCH_LEDSGPIO_H */ diff --git a/arch/arm/mach-s3c2410/include/mach/map.h b/arch/arm/mach-s3c2410/include/mach/map.h deleted file mode 100644 index 78ae807f1281..000000000000 --- a/arch/arm/mach-s3c2410/include/mach/map.h +++ /dev/null @@ -1,165 +0,0 @@ -/* arch/arm/mach-s3c2410/include/mach/map.h - * - * Copyright (c) 2003 Simtec Electronics - * Ben Dooks - * - * S3C2410 - Memory map definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_MAP_H -#define __ASM_ARCH_MAP_H - -#include - -/* - * S3C2410 UART offset is 0x4000 but the other SoCs are 0x400. - * So need to define it, and here is to avoid redefinition warning. - */ -#define S3C_UART_OFFSET (0x4000) - -#include - -/* - * interrupt controller is the first thing we put in, to make - * the assembly code for the irq detection easier - */ -#define S3C2410_PA_IRQ (0x4A000000) -#define S3C24XX_SZ_IRQ SZ_1M - -/* memory controller registers */ -#define S3C2410_PA_MEMCTRL (0x48000000) -#define S3C24XX_SZ_MEMCTRL SZ_1M - -/* UARTs */ -#define S3C_VA_UARTx(uart) (S3C_VA_UART + ((uart * S3C_UART_OFFSET))) - -/* Timers */ -#define S3C2410_PA_TIMER (0x51000000) -#define S3C24XX_SZ_TIMER SZ_1M - -/* Clock and Power management */ -#define S3C24XX_SZ_CLKPWR SZ_1M - -/* USB Device port */ -#define S3C2410_PA_USBDEV (0x52000000) -#define S3C24XX_SZ_USBDEV SZ_1M - -/* Watchdog */ -#define S3C2410_PA_WATCHDOG (0x53000000) -#define S3C24XX_SZ_WATCHDOG SZ_1M - -/* Standard size definitions for peripheral blocks. */ - -#define S3C24XX_SZ_UART SZ_1M -#define S3C24XX_SZ_IIS SZ_1M -#define S3C24XX_SZ_ADC SZ_1M -#define S3C24XX_SZ_SPI SZ_1M -#define S3C24XX_SZ_SDI SZ_1M -#define S3C24XX_SZ_NAND SZ_1M -#define S3C24XX_SZ_GPIO SZ_1M - -/* USB host controller */ -#define S3C2410_PA_USBHOST (0x49000000) - -/* S3C2416/S3C2443/S3C2450 High-Speed USB Gadget */ -#define S3C2416_PA_HSUDC (0x49800000) -#define S3C2416_SZ_HSUDC (SZ_4K) - -/* DMA controller */ -#define S3C2410_PA_DMA (0x4B000000) -#define S3C24XX_SZ_DMA SZ_1M - -/* Clock and Power management */ -#define S3C2410_PA_CLKPWR (0x4C000000) - -/* LCD controller */ -#define S3C2410_PA_LCD (0x4D000000) -#define S3C24XX_SZ_LCD SZ_1M - -/* NAND flash controller */ -#define S3C2410_PA_NAND (0x4E000000) - -/* IIC hardware controller */ -#define S3C2410_PA_IIC (0x54000000) - -/* IIS controller */ -#define S3C2410_PA_IIS (0x55000000) - -/* RTC */ -#define S3C2410_PA_RTC (0x57000000) -#define S3C24XX_SZ_RTC SZ_1M - -/* ADC */ -#define S3C2410_PA_ADC (0x58000000) - -/* SPI */ -#define S3C2410_PA_SPI (0x59000000) - -/* SDI */ -#define S3C2410_PA_SDI (0x5A000000) - -/* CAMIF */ -#define S3C2440_PA_CAMIF (0x4F000000) -#define S3C2440_SZ_CAMIF SZ_1M - -/* AC97 */ - -#define S3C2440_PA_AC97 (0x5B000000) -#define S3C2440_SZ_AC97 SZ_1M - -/* S3C2443/S3C2416 High-speed SD/MMC */ -#define S3C2443_PA_HSMMC (0x4A800000) -#define S3C2416_PA_HSMMC0 (0x4AC00000) - -#define S3C2443_PA_FB (0x4C800000) - -/* S3C2412 memory and IO controls */ -#define S3C2412_PA_SSMC (0x4F000000) - -#define S3C2412_PA_EBI (0x48800000) - -/* physical addresses of all the chip-select areas */ - -#define S3C2410_CS0 (0x00000000) -#define S3C2410_CS1 (0x08000000) -#define S3C2410_CS2 (0x10000000) -#define S3C2410_CS3 (0x18000000) -#define S3C2410_CS4 (0x20000000) -#define S3C2410_CS5 (0x28000000) -#define S3C2410_CS6 (0x30000000) -#define S3C2410_CS7 (0x38000000) - -#define S3C2410_SDRAM_PA (S3C2410_CS6) - -/* Use a single interface for common resources between S3C24XX cpus */ - -#define S3C24XX_PA_IRQ S3C2410_PA_IRQ -#define S3C24XX_PA_MEMCTRL S3C2410_PA_MEMCTRL -#define S3C24XX_PA_DMA S3C2410_PA_DMA -#define S3C24XX_PA_CLKPWR S3C2410_PA_CLKPWR -#define S3C24XX_PA_LCD S3C2410_PA_LCD -#define S3C24XX_PA_TIMER S3C2410_PA_TIMER -#define S3C24XX_PA_USBDEV S3C2410_PA_USBDEV -#define S3C24XX_PA_WATCHDOG S3C2410_PA_WATCHDOG -#define S3C24XX_PA_IIS S3C2410_PA_IIS -#define S3C24XX_PA_RTC S3C2410_PA_RTC -#define S3C24XX_PA_ADC S3C2410_PA_ADC -#define S3C24XX_PA_SPI S3C2410_PA_SPI -#define S3C24XX_PA_SPI1 (S3C2410_PA_SPI + S3C2410_SPI1) -#define S3C24XX_PA_SDI S3C2410_PA_SDI -#define S3C24XX_PA_NAND S3C2410_PA_NAND - -#define S3C_PA_FB S3C2443_PA_FB -#define S3C_PA_IIC S3C2410_PA_IIC -#define S3C_PA_UART S3C24XX_PA_UART -#define S3C_PA_USBHOST S3C2410_PA_USBHOST -#define S3C_PA_HSMMC0 S3C2416_PA_HSMMC0 -#define S3C_PA_HSMMC1 S3C2443_PA_HSMMC -#define S3C_PA_WDT S3C2410_PA_WATCHDOG -#define S3C_PA_NAND S3C24XX_PA_NAND - -#endif /* __ASM_ARCH_MAP_H */ diff --git a/arch/arm/mach-s3c2410/include/mach/osiris-cpld.h b/arch/arm/mach-s3c2410/include/mach/osiris-cpld.h deleted file mode 100644 index e9e36b0abbac..000000000000 --- a/arch/arm/mach-s3c2410/include/mach/osiris-cpld.h +++ /dev/null @@ -1,30 +0,0 @@ -/* arch/arm/mach-s3c2410/include/mach/osiris-cpld.h - * - * Copyright 2005 Simtec Electronics - * http://www.simtec.co.uk/products/ - * Ben Dooks - * - * OSIRIS - CPLD control constants - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_OSIRISCPLD_H -#define __ASM_ARCH_OSIRISCPLD_H - -/* CTRL0 - NAND WP control */ - -#define OSIRIS_CTRL0_NANDSEL (0x3) -#define OSIRIS_CTRL0_BOOT_INT (1<<3) -#define OSIRIS_CTRL0_PCMCIA (1<<4) -#define OSIRIS_CTRL0_FIX8 (1<<5) -#define OSIRIS_CTRL0_PCMCIA_nWAIT (1<<6) -#define OSIRIS_CTRL0_PCMCIA_nIOIS16 (1<<7) - -#define OSIRIS_CTRL1_FIX8 (1<<0) - -#define OSIRIS_ID_REVMASK (0x7) - -#endif /* __ASM_ARCH_OSIRISCPLD_H */ diff --git a/arch/arm/mach-s3c2410/include/mach/osiris-map.h b/arch/arm/mach-s3c2410/include/mach/osiris-map.h deleted file mode 100644 index 17380f848428..000000000000 --- a/arch/arm/mach-s3c2410/include/mach/osiris-map.h +++ /dev/null @@ -1,42 +0,0 @@ -/* arch/arm/mach-s3c2410/include/mach/osiris-map.h - * - * Copyright 2005 Simtec Electronics - * http://www.simtec.co.uk/products/ - * Ben Dooks - * - * OSIRIS - Memory map definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -/* needs arch/map.h including with this */ - -#ifndef __ASM_ARCH_OSIRISMAP_H -#define __ASM_ARCH_OSIRISMAP_H - -/* start peripherals off after the S3C2410 */ - -#define OSIRIS_IOADDR(x) (S3C2410_ADDR((x) + 0x04000000)) - -#define OSIRIS_PA_CPLD (S3C2410_CS1 | (1<<26)) - -/* we put the CPLD registers next, to get them out of the way */ - -#define OSIRIS_VA_CTRL0 OSIRIS_IOADDR(0x00000000) -#define OSIRIS_PA_CTRL0 (OSIRIS_PA_CPLD) - -#define OSIRIS_VA_CTRL1 OSIRIS_IOADDR(0x00100000) -#define OSIRIS_PA_CTRL1 (OSIRIS_PA_CPLD + (1<<23)) - -#define OSIRIS_VA_CTRL2 OSIRIS_IOADDR(0x00200000) -#define OSIRIS_PA_CTRL2 (OSIRIS_PA_CPLD + (2<<23)) - -#define OSIRIS_VA_CTRL3 OSIRIS_IOADDR(0x00300000) -#define OSIRIS_PA_CTRL3 (OSIRIS_PA_CPLD + (2<<23)) - -#define OSIRIS_VA_IDREG OSIRIS_IOADDR(0x00700000) -#define OSIRIS_PA_IDREG (OSIRIS_PA_CPLD + (7<<23)) - -#endif /* __ASM_ARCH_OSIRISMAP_H */ diff --git a/arch/arm/mach-s3c2410/include/mach/otom-map.h b/arch/arm/mach-s3c2410/include/mach/otom-map.h deleted file mode 100644 index f9277a52c145..000000000000 --- a/arch/arm/mach-s3c2410/include/mach/otom-map.h +++ /dev/null @@ -1,30 +0,0 @@ -/* arch/arm/mach-s3c2410/include/mach/otom-map.h - * - * (c) 2005 Guillaume GOURAT / NexVision - * guillaume.gourat@nexvision.fr - * - * NexVision OTOM board memory map definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -/* needs arch/map.h including with this */ - -/* ok, we've used up to 0x01300000, now we need to find space for the - * peripherals that live in the nGCS[x] areas, which are quite numerous - * in their space. - */ - -#ifndef __ASM_ARCH_OTOMMAP_H -#define __ASM_ARCH_OTOMMAP_H - -#define OTOM_PA_CS8900A_BASE (S3C2410_CS3 + 0x01000000) /* nGCS3 +0x01000000 */ -#define OTOM_VA_CS8900A_BASE S3C2410_ADDR(0x04000000) /* 0xF4000000 */ - -/* physical offset addresses for the peripherals */ - -#define OTOM_PA_FLASH0_BASE (S3C2410_CS0) /* Bank 0 */ - -#endif /* __ASM_ARCH_OTOMMAP_H */ diff --git a/arch/arm/mach-s3c2410/include/mach/pm-core.h b/arch/arm/mach-s3c2410/include/mach/pm-core.h deleted file mode 100644 index 2eef7e6f7675..000000000000 --- a/arch/arm/mach-s3c2410/include/mach/pm-core.h +++ /dev/null @@ -1,67 +0,0 @@ -/* linux/arch/arm/mach-s3c2410/include/pm-core.h - * - * Copyright 2008 Simtec Electronics - * Ben Dooks - * http://armlinux.simtec.co.uk/ - * - * S3C24xx - PM core support for arch/arm/plat-s3c/pm.c - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -static inline void s3c_pm_debug_init_uart(void) -{ - unsigned long tmp = __raw_readl(S3C2410_CLKCON); - - /* re-start uart clocks */ - tmp |= S3C2410_CLKCON_UART0; - tmp |= S3C2410_CLKCON_UART1; - tmp |= S3C2410_CLKCON_UART2; - - __raw_writel(tmp, S3C2410_CLKCON); - udelay(10); -} - -static inline void s3c_pm_arch_prepare_irqs(void) -{ - __raw_writel(s3c_irqwake_intmask, S3C2410_INTMSK); - __raw_writel(s3c_irqwake_eintmask, S3C2410_EINTMASK); - - /* ack any outstanding external interrupts before we go to sleep */ - - __raw_writel(__raw_readl(S3C2410_EINTPEND), S3C2410_EINTPEND); - __raw_writel(__raw_readl(S3C2410_INTPND), S3C2410_INTPND); - __raw_writel(__raw_readl(S3C2410_SRCPND), S3C2410_SRCPND); - -} - -static inline void s3c_pm_arch_stop_clocks(void) -{ - __raw_writel(0x00, S3C2410_CLKCON); /* turn off clocks over sleep */ -} - -static void s3c_pm_show_resume_irqs(int start, unsigned long which, - unsigned long mask); - -static inline void s3c_pm_arch_show_resume_irqs(void) -{ - S3C_PMDBG("post sleep: IRQs 0x%08x, 0x%08x\n", - __raw_readl(S3C2410_SRCPND), - __raw_readl(S3C2410_EINTPEND)); - - s3c_pm_show_resume_irqs(IRQ_EINT0, __raw_readl(S3C2410_SRCPND), - s3c_irqwake_intmask); - - s3c_pm_show_resume_irqs(IRQ_EINT4-4, __raw_readl(S3C2410_EINTPEND), - s3c_irqwake_eintmask); -} - -static inline void s3c_pm_arch_update_uart(void __iomem *regs, - struct pm_uart_save *save) -{ -} - -static inline void s3c_pm_restored_gpios(void) { } -static inline void samsung_pm_saved_gpios(void) { } diff --git a/arch/arm/mach-s3c2410/include/mach/regs-clock.h b/arch/arm/mach-s3c2410/include/mach/regs-clock.h deleted file mode 100644 index 3415b60082d7..000000000000 --- a/arch/arm/mach-s3c2410/include/mach/regs-clock.h +++ /dev/null @@ -1,166 +0,0 @@ -/* arch/arm/mach-s3c2410/include/mach/regs-clock.h - * - * Copyright (c) 2003-2006 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * S3C2410 clock register definitions -*/ - -#ifndef __ASM_ARM_REGS_CLOCK -#define __ASM_ARM_REGS_CLOCK - -#define S3C2410_CLKREG(x) ((x) + S3C24XX_VA_CLKPWR) - -#define S3C2410_PLLVAL(_m,_p,_s) ((_m) << 12 | ((_p) << 4) | ((_s))) - -#define S3C2410_LOCKTIME S3C2410_CLKREG(0x00) -#define S3C2410_MPLLCON S3C2410_CLKREG(0x04) -#define S3C2410_UPLLCON S3C2410_CLKREG(0x08) -#define S3C2410_CLKCON S3C2410_CLKREG(0x0C) -#define S3C2410_CLKSLOW S3C2410_CLKREG(0x10) -#define S3C2410_CLKDIVN S3C2410_CLKREG(0x14) - -#define S3C2410_CLKCON_IDLE (1<<2) -#define S3C2410_CLKCON_POWER (1<<3) -#define S3C2410_CLKCON_NAND (1<<4) -#define S3C2410_CLKCON_LCDC (1<<5) -#define S3C2410_CLKCON_USBH (1<<6) -#define S3C2410_CLKCON_USBD (1<<7) -#define S3C2410_CLKCON_PWMT (1<<8) -#define S3C2410_CLKCON_SDI (1<<9) -#define S3C2410_CLKCON_UART0 (1<<10) -#define S3C2410_CLKCON_UART1 (1<<11) -#define S3C2410_CLKCON_UART2 (1<<12) -#define S3C2410_CLKCON_GPIO (1<<13) -#define S3C2410_CLKCON_RTC (1<<14) -#define S3C2410_CLKCON_ADC (1<<15) -#define S3C2410_CLKCON_IIC (1<<16) -#define S3C2410_CLKCON_IIS (1<<17) -#define S3C2410_CLKCON_SPI (1<<18) - -/* DCLKCON register addresses in gpio.h */ - -#define S3C2410_DCLKCON_DCLK0EN (1<<0) -#define S3C2410_DCLKCON_DCLK0_PCLK (0<<1) -#define S3C2410_DCLKCON_DCLK0_UCLK (1<<1) -#define S3C2410_DCLKCON_DCLK0_DIV(x) (((x) - 1 )<<4) -#define S3C2410_DCLKCON_DCLK0_CMP(x) (((x) - 1 )<<8) -#define S3C2410_DCLKCON_DCLK0_DIV_MASK ((0xf)<<4) -#define S3C2410_DCLKCON_DCLK0_CMP_MASK ((0xf)<<8) - -#define S3C2410_DCLKCON_DCLK1EN (1<<16) -#define S3C2410_DCLKCON_DCLK1_PCLK (0<<17) -#define S3C2410_DCLKCON_DCLK1_UCLK (1<<17) -#define S3C2410_DCLKCON_DCLK1_DIV(x) (((x) - 1) <<20) -#define S3C2410_DCLKCON_DCLK1_CMP(x) (((x) - 1) <<24) -#define S3C2410_DCLKCON_DCLK1_DIV_MASK ((0xf) <<20) -#define S3C2410_DCLKCON_DCLK1_CMP_MASK ((0xf) <<24) - -#define S3C2410_CLKDIVN_PDIVN (1<<0) -#define S3C2410_CLKDIVN_HDIVN (1<<1) - -#define S3C2410_CLKSLOW_UCLK_OFF (1<<7) -#define S3C2410_CLKSLOW_MPLL_OFF (1<<5) -#define S3C2410_CLKSLOW_SLOW (1<<4) -#define S3C2410_CLKSLOW_SLOWVAL(x) (x) -#define S3C2410_CLKSLOW_GET_SLOWVAL(x) ((x) & 7) - -#if defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2442) - -/* extra registers */ -#define S3C2440_CAMDIVN S3C2410_CLKREG(0x18) - -#define S3C2440_CLKCON_CAMERA (1<<19) -#define S3C2440_CLKCON_AC97 (1<<20) - -#define S3C2440_CLKDIVN_PDIVN (1<<0) -#define S3C2440_CLKDIVN_HDIVN_MASK (3<<1) -#define S3C2440_CLKDIVN_HDIVN_1 (0<<1) -#define S3C2440_CLKDIVN_HDIVN_2 (1<<1) -#define S3C2440_CLKDIVN_HDIVN_4_8 (2<<1) -#define S3C2440_CLKDIVN_HDIVN_3_6 (3<<1) -#define S3C2440_CLKDIVN_UCLK (1<<3) - -#define S3C2440_CAMDIVN_CAMCLK_MASK (0xf<<0) -#define S3C2440_CAMDIVN_CAMCLK_SEL (1<<4) -#define S3C2440_CAMDIVN_HCLK3_HALF (1<<8) -#define S3C2440_CAMDIVN_HCLK4_HALF (1<<9) -#define S3C2440_CAMDIVN_DVSEN (1<<12) - -#define S3C2442_CAMDIVN_CAMCLK_DIV3 (1<<5) - -#endif /* CONFIG_CPU_S3C2440 or CONFIG_CPU_S3C2442 */ - -#if defined(CONFIG_CPU_S3C2412) || defined(CONFIG_CPU_S3C2413) - -#define S3C2412_OSCSET S3C2410_CLKREG(0x18) -#define S3C2412_CLKSRC S3C2410_CLKREG(0x1C) - -#define S3C2412_PLLCON_OFF (1<<20) - -#define S3C2412_CLKDIVN_PDIVN (1<<2) -#define S3C2412_CLKDIVN_HDIVN_MASK (3<<0) -#define S3C2412_CLKDIVN_ARMDIVN (1<<3) -#define S3C2412_CLKDIVN_DVSEN (1<<4) -#define S3C2412_CLKDIVN_HALFHCLK (1<<5) -#define S3C2412_CLKDIVN_USB48DIV (1<<6) -#define S3C2412_CLKDIVN_UARTDIV_MASK (15<<8) -#define S3C2412_CLKDIVN_UARTDIV_SHIFT (8) -#define S3C2412_CLKDIVN_I2SDIV_MASK (15<<12) -#define S3C2412_CLKDIVN_I2SDIV_SHIFT (12) -#define S3C2412_CLKDIVN_CAMDIV_MASK (15<<16) -#define S3C2412_CLKDIVN_CAMDIV_SHIFT (16) - -#define S3C2412_CLKCON_WDT (1<<28) -#define S3C2412_CLKCON_SPI (1<<27) -#define S3C2412_CLKCON_IIS (1<<26) -#define S3C2412_CLKCON_IIC (1<<25) -#define S3C2412_CLKCON_ADC (1<<24) -#define S3C2412_CLKCON_RTC (1<<23) -#define S3C2412_CLKCON_GPIO (1<<22) -#define S3C2412_CLKCON_UART2 (1<<21) -#define S3C2412_CLKCON_UART1 (1<<20) -#define S3C2412_CLKCON_UART0 (1<<19) -#define S3C2412_CLKCON_SDI (1<<18) -#define S3C2412_CLKCON_PWMT (1<<17) -#define S3C2412_CLKCON_USBD (1<<16) -#define S3C2412_CLKCON_CAMCLK (1<<15) -#define S3C2412_CLKCON_UARTCLK (1<<14) -/* missing 13 */ -#define S3C2412_CLKCON_USB_HOST48 (1<<12) -#define S3C2412_CLKCON_USB_DEV48 (1<<11) -#define S3C2412_CLKCON_HCLKdiv2 (1<<10) -#define S3C2412_CLKCON_HCLKx2 (1<<9) -#define S3C2412_CLKCON_SDRAM (1<<8) -/* missing 7 */ -#define S3C2412_CLKCON_USBH S3C2410_CLKCON_USBH -#define S3C2412_CLKCON_LCDC S3C2410_CLKCON_LCDC -#define S3C2412_CLKCON_NAND S3C2410_CLKCON_NAND -#define S3C2412_CLKCON_DMA3 (1<<3) -#define S3C2412_CLKCON_DMA2 (1<<2) -#define S3C2412_CLKCON_DMA1 (1<<1) -#define S3C2412_CLKCON_DMA0 (1<<0) - -/* clock sourec controls */ - -#define S3C2412_CLKSRC_EXTCLKDIV_MASK (7 << 0) -#define S3C2412_CLKSRC_EXTCLKDIV_SHIFT (0) -#define S3C2412_CLKSRC_MDIVCLK_EXTCLKDIV (1<<3) -#define S3C2412_CLKSRC_MSYSCLK_MPLL (1<<4) -#define S3C2412_CLKSRC_USYSCLK_UPLL (1<<5) -#define S3C2412_CLKSRC_UARTCLK_MPLL (1<<8) -#define S3C2412_CLKSRC_I2SCLK_MPLL (1<<9) -#define S3C2412_CLKSRC_USBCLK_HCLK (1<<10) -#define S3C2412_CLKSRC_CAMCLK_HCLK (1<<11) -#define S3C2412_CLKSRC_UREFCLK_EXTCLK (1<<12) -#define S3C2412_CLKSRC_EREFCLK_EXTCLK (1<<14) - -#endif /* CONFIG_CPU_S3C2412 | CONFIG_CPU_S3C2413 */ - -#define S3C2416_CLKDIV2 S3C2410_CLKREG(0x28) - -#endif /* __ASM_ARM_REGS_CLOCK */ diff --git a/arch/arm/mach-s3c2410/include/mach/regs-dsc.h b/arch/arm/mach-s3c2410/include/mach/regs-dsc.h deleted file mode 100644 index 98fd4a05587c..000000000000 --- a/arch/arm/mach-s3c2410/include/mach/regs-dsc.h +++ /dev/null @@ -1,220 +0,0 @@ -/* arch/arm/mach-s3c2410/include/mach/regs-dsc.h - * - * Copyright (c) 2004 Simtec Electronics - * http://www.simtec.co.uk/products/SWLINUX/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * S3C2440/S3C2412 Signal Drive Strength Control -*/ - - -#ifndef __ASM_ARCH_REGS_DSC_H -#define __ASM_ARCH_REGS_DSC_H "2440-dsc" - -#if defined(CONFIG_CPU_S3C2412) -#define S3C2412_DSC0 S3C2410_GPIOREG(0xdc) -#define S3C2412_DSC1 S3C2410_GPIOREG(0xe0) -#endif - -#if defined(CONFIG_CPU_S3C2416) -#define S3C2416_DSC0 S3C2410_GPIOREG(0xc0) -#define S3C2416_DSC1 S3C2410_GPIOREG(0xc4) -#define S3C2416_DSC2 S3C2410_GPIOREG(0xc8) -#define S3C2416_DSC3 S3C2410_GPIOREG(0x110) - -#define S3C2416_SELECT_DSC0 (0 << 30) -#define S3C2416_SELECT_DSC1 (1 << 30) -#define S3C2416_SELECT_DSC2 (2 << 30) -#define S3C2416_SELECT_DSC3 (3 << 30) - -#define S3C2416_DSC_GETSHIFT(x) (x & 30) - -#define S3C2416_DSC0_CF (S3C2416_SELECT_DSC0 | 28) -#define S3C2416_DSC0_CF_5mA (0 << 28) -#define S3C2416_DSC0_CF_10mA (1 << 28) -#define S3C2416_DSC0_CF_15mA (2 << 28) -#define S3C2416_DSC0_CF_21mA (3 << 28) -#define S3C2416_DSC0_CF_MASK (3 << 28) - -#define S3C2416_DSC0_nRBE (S3C2416_SELECT_DSC0 | 26) -#define S3C2416_DSC0_nRBE_5mA (0 << 26) -#define S3C2416_DSC0_nRBE_10mA (1 << 26) -#define S3C2416_DSC0_nRBE_15mA (2 << 26) -#define S3C2416_DSC0_nRBE_21mA (3 << 26) -#define S3C2416_DSC0_nRBE_MASK (3 << 26) - -#define S3C2416_DSC0_nROE (S3C2416_SELECT_DSC0 | 24) -#define S3C2416_DSC0_nROE_5mA (0 << 24) -#define S3C2416_DSC0_nROE_10mA (1 << 24) -#define S3C2416_DSC0_nROE_15mA (2 << 24) -#define S3C2416_DSC0_nROE_21mA (3 << 24) -#define S3C2416_DSC0_nROE_MASK (3 << 24) - -#endif - -#if defined(CONFIG_CPU_S3C244X) - -#define S3C2440_DSC0 S3C2410_GPIOREG(0xc4) -#define S3C2440_DSC1 S3C2410_GPIOREG(0xc8) - -#define S3C2440_SELECT_DSC0 (0) -#define S3C2440_SELECT_DSC1 (1<<31) - -#define S3C2440_DSC_GETSHIFT(x) ((x) & 31) - -#define S3C2440_DSC0_DISABLE (1<<31) - -#define S3C2440_DSC0_ADDR (S3C2440_SELECT_DSC0 | 8) -#define S3C2440_DSC0_ADDR_12mA (0<<8) -#define S3C2440_DSC0_ADDR_10mA (1<<8) -#define S3C2440_DSC0_ADDR_8mA (2<<8) -#define S3C2440_DSC0_ADDR_6mA (3<<8) -#define S3C2440_DSC0_ADDR_MASK (3<<8) - -/* D24..D31 */ -#define S3C2440_DSC0_DATA3 (S3C2440_SELECT_DSC0 | 6) -#define S3C2440_DSC0_DATA3_12mA (0<<6) -#define S3C2440_DSC0_DATA3_10mA (1<<6) -#define S3C2440_DSC0_DATA3_8mA (2<<6) -#define S3C2440_DSC0_DATA3_6mA (3<<6) -#define S3C2440_DSC0_DATA3_MASK (3<<6) - -/* D16..D23 */ -#define S3C2440_DSC0_DATA2 (S3C2440_SELECT_DSC0 | 4) -#define S3C2440_DSC0_DATA2_12mA (0<<4) -#define S3C2440_DSC0_DATA2_10mA (1<<4) -#define S3C2440_DSC0_DATA2_8mA (2<<4) -#define S3C2440_DSC0_DATA2_6mA (3<<4) -#define S3C2440_DSC0_DATA2_MASK (3<<4) - -/* D8..D15 */ -#define S3C2440_DSC0_DATA1 (S3C2440_SELECT_DSC0 | 2) -#define S3C2440_DSC0_DATA1_12mA (0<<2) -#define S3C2440_DSC0_DATA1_10mA (1<<2) -#define S3C2440_DSC0_DATA1_8mA (2<<2) -#define S3C2440_DSC0_DATA1_6mA (3<<2) -#define S3C2440_DSC0_DATA1_MASK (3<<2) - -/* D0..D7 */ -#define S3C2440_DSC0_DATA0 (S3C2440_SELECT_DSC0 | 0) -#define S3C2440_DSC0_DATA0_12mA (0<<0) -#define S3C2440_DSC0_DATA0_10mA (1<<0) -#define S3C2440_DSC0_DATA0_8mA (2<<0) -#define S3C2440_DSC0_DATA0_6mA (3<<0) -#define S3C2440_DSC0_DATA0_MASK (3<<0) - -#define S3C2440_DSC1_SCK1 (S3C2440_SELECT_DSC1 | 28) -#define S3C2440_DSC1_SCK1_12mA (0<<28) -#define S3C2440_DSC1_SCK1_10mA (1<<28) -#define S3C2440_DSC1_SCK1_8mA (2<<28) -#define S3C2440_DSC1_SCK1_6mA (3<<28) -#define S3C2440_DSC1_SCK1_MASK (3<<28) - -#define S3C2440_DSC1_SCK0 (S3C2440_SELECT_DSC1 | 26) -#define S3C2440_DSC1_SCK0_12mA (0<<26) -#define S3C2440_DSC1_SCK0_10mA (1<<26) -#define S3C2440_DSC1_SCK0_8mA (2<<26) -#define S3C2440_DSC1_SCK0_6mA (3<<26) -#define S3C2440_DSC1_SCK0_MASK (3<<26) - -#define S3C2440_DSC1_SCKE (S3C2440_SELECT_DSC1 | 24) -#define S3C2440_DSC1_SCKE_10mA (0<<24) -#define S3C2440_DSC1_SCKE_8mA (1<<24) -#define S3C2440_DSC1_SCKE_6mA (2<<24) -#define S3C2440_DSC1_SCKE_4mA (3<<24) -#define S3C2440_DSC1_SCKE_MASK (3<<24) - -/* SDRAM nRAS/nCAS */ -#define S3C2440_DSC1_SDR (S3C2440_SELECT_DSC1 | 22) -#define S3C2440_DSC1_SDR_10mA (0<<22) -#define S3C2440_DSC1_SDR_8mA (1<<22) -#define S3C2440_DSC1_SDR_6mA (2<<22) -#define S3C2440_DSC1_SDR_4mA (3<<22) -#define S3C2440_DSC1_SDR_MASK (3<<22) - -/* NAND Flash Controller */ -#define S3C2440_DSC1_NFC (S3C2440_SELECT_DSC1 | 20) -#define S3C2440_DSC1_NFC_10mA (0<<20) -#define S3C2440_DSC1_NFC_8mA (1<<20) -#define S3C2440_DSC1_NFC_6mA (2<<20) -#define S3C2440_DSC1_NFC_4mA (3<<20) -#define S3C2440_DSC1_NFC_MASK (3<<20) - -/* nBE[0..3] */ -#define S3C2440_DSC1_nBE (S3C2440_SELECT_DSC1 | 18) -#define S3C2440_DSC1_nBE_10mA (0<<18) -#define S3C2440_DSC1_nBE_8mA (1<<18) -#define S3C2440_DSC1_nBE_6mA (2<<18) -#define S3C2440_DSC1_nBE_4mA (3<<18) -#define S3C2440_DSC1_nBE_MASK (3<<18) - -#define S3C2440_DSC1_WOE (S3C2440_SELECT_DSC1 | 16) -#define S3C2440_DSC1_WOE_10mA (0<<16) -#define S3C2440_DSC1_WOE_8mA (1<<16) -#define S3C2440_DSC1_WOE_6mA (2<<16) -#define S3C2440_DSC1_WOE_4mA (3<<16) -#define S3C2440_DSC1_WOE_MASK (3<<16) - -#define S3C2440_DSC1_CS7 (S3C2440_SELECT_DSC1 | 14) -#define S3C2440_DSC1_CS7_10mA (0<<14) -#define S3C2440_DSC1_CS7_8mA (1<<14) -#define S3C2440_DSC1_CS7_6mA (2<<14) -#define S3C2440_DSC1_CS7_4mA (3<<14) -#define S3C2440_DSC1_CS7_MASK (3<<14) - -#define S3C2440_DSC1_CS6 (S3C2440_SELECT_DSC1 | 12) -#define S3C2440_DSC1_CS6_10mA (0<<12) -#define S3C2440_DSC1_CS6_8mA (1<<12) -#define S3C2440_DSC1_CS6_6mA (2<<12) -#define S3C2440_DSC1_CS6_4mA (3<<12) -#define S3C2440_DSC1_CS6_MASK (3<<12) - -#define S3C2440_DSC1_CS5 (S3C2440_SELECT_DSC1 | 10) -#define S3C2440_DSC1_CS5_10mA (0<<10) -#define S3C2440_DSC1_CS5_8mA (1<<10) -#define S3C2440_DSC1_CS5_6mA (2<<10) -#define S3C2440_DSC1_CS5_4mA (3<<10) -#define S3C2440_DSC1_CS5_MASK (3<<10) - -#define S3C2440_DSC1_CS4 (S3C2440_SELECT_DSC1 | 8) -#define S3C2440_DSC1_CS4_10mA (0<<8) -#define S3C2440_DSC1_CS4_8mA (1<<8) -#define S3C2440_DSC1_CS4_6mA (2<<8) -#define S3C2440_DSC1_CS4_4mA (3<<8) -#define S3C2440_DSC1_CS4_MASK (3<<8) - -#define S3C2440_DSC1_CS3 (S3C2440_SELECT_DSC1 | 6) -#define S3C2440_DSC1_CS3_10mA (0<<6) -#define S3C2440_DSC1_CS3_8mA (1<<6) -#define S3C2440_DSC1_CS3_6mA (2<<6) -#define S3C2440_DSC1_CS3_4mA (3<<6) -#define S3C2440_DSC1_CS3_MASK (3<<6) - -#define S3C2440_DSC1_CS2 (S3C2440_SELECT_DSC1 | 4) -#define S3C2440_DSC1_CS2_10mA (0<<4) -#define S3C2440_DSC1_CS2_8mA (1<<4) -#define S3C2440_DSC1_CS2_6mA (2<<4) -#define S3C2440_DSC1_CS2_4mA (3<<4) -#define S3C2440_DSC1_CS2_MASK (3<<4) - -#define S3C2440_DSC1_CS1 (S3C2440_SELECT_DSC1 | 2) -#define S3C2440_DSC1_CS1_10mA (0<<2) -#define S3C2440_DSC1_CS1_8mA (1<<2) -#define S3C2440_DSC1_CS1_6mA (2<<2) -#define S3C2440_DSC1_CS1_4mA (3<<2) -#define S3C2440_DSC1_CS1_MASK (3<<2) - -#define S3C2440_DSC1_CS0 (S3C2440_SELECT_DSC1 | 0) -#define S3C2440_DSC1_CS0_10mA (0<<0) -#define S3C2440_DSC1_CS0_8mA (1<<0) -#define S3C2440_DSC1_CS0_6mA (2<<0) -#define S3C2440_DSC1_CS0_4mA (3<<0) -#define S3C2440_DSC1_CS0_MASK (3<<0) - -#endif /* CONFIG_CPU_S3C2440 */ - -#endif /* __ASM_ARCH_REGS_DSC_H */ - diff --git a/arch/arm/mach-s3c2410/include/mach/regs-gpio.h b/arch/arm/mach-s3c2410/include/mach/regs-gpio.h deleted file mode 100644 index cac1ad6b582c..000000000000 --- a/arch/arm/mach-s3c2410/include/mach/regs-gpio.h +++ /dev/null @@ -1,602 +0,0 @@ -/* arch/arm/mach-s3c2410/include/mach/regs-gpio.h - * - * Copyright (c) 2003-2004 Simtec Electronics - * http://www.simtec.co.uk/products/SWLINUX/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * S3C2410 GPIO register definitions -*/ - - -#ifndef __ASM_ARCH_REGS_GPIO_H -#define __ASM_ARCH_REGS_GPIO_H - -#include - -#define S3C24XX_MISCCR S3C24XX_GPIOREG2(0x80) - -/* general configuration options */ - -#define S3C2410_GPIO_LEAVE (0xFFFFFFFF) -#define S3C2410_GPIO_INPUT (0xFFFFFFF0) /* not available on A */ -#define S3C2410_GPIO_OUTPUT (0xFFFFFFF1) -#define S3C2410_GPIO_IRQ (0xFFFFFFF2) /* not available for all */ -#define S3C2410_GPIO_SFN2 (0xFFFFFFF2) /* bank A => addr/cs/nand */ -#define S3C2410_GPIO_SFN3 (0xFFFFFFF3) /* not available on A */ - -/* register address for the GPIO registers. - * S3C24XX_GPIOREG2 is for the second set of registers in the - * GPIO which move between s3c2410 and s3c2412 type systems */ - -#define S3C2410_GPIOREG(x) ((x) + S3C24XX_VA_GPIO) -#define S3C24XX_GPIOREG2(x) ((x) + S3C24XX_VA_GPIO2) - - -/* configure GPIO ports A..G */ - -/* port A - S3C2410: 22bits, zero in bit X makes pin X output - * 1 makes port special function, this is default -*/ -#define S3C2410_GPACON S3C2410_GPIOREG(0x00) -#define S3C2410_GPADAT S3C2410_GPIOREG(0x04) - -#define S3C2410_GPA0_ADDR0 (1<<0) -#define S3C2410_GPA1_ADDR16 (1<<1) -#define S3C2410_GPA2_ADDR17 (1<<2) -#define S3C2410_GPA3_ADDR18 (1<<3) -#define S3C2410_GPA4_ADDR19 (1<<4) -#define S3C2410_GPA5_ADDR20 (1<<5) -#define S3C2410_GPA6_ADDR21 (1<<6) -#define S3C2410_GPA7_ADDR22 (1<<7) -#define S3C2410_GPA8_ADDR23 (1<<8) -#define S3C2410_GPA9_ADDR24 (1<<9) -#define S3C2410_GPA10_ADDR25 (1<<10) -#define S3C2410_GPA11_ADDR26 (1<<11) -#define S3C2410_GPA12_nGCS1 (1<<12) -#define S3C2410_GPA13_nGCS2 (1<<13) -#define S3C2410_GPA14_nGCS3 (1<<14) -#define S3C2410_GPA15_nGCS4 (1<<15) -#define S3C2410_GPA16_nGCS5 (1<<16) -#define S3C2410_GPA17_CLE (1<<17) -#define S3C2410_GPA18_ALE (1<<18) -#define S3C2410_GPA19_nFWE (1<<19) -#define S3C2410_GPA20_nFRE (1<<20) -#define S3C2410_GPA21_nRSTOUT (1<<21) -#define S3C2410_GPA22_nFCE (1<<22) - -/* 0x08 and 0x0c are reserved on S3C2410 */ - -/* S3C2410: - * GPB is 10 IO pins, each configured by 2 bits each in GPBCON. - * 00 = input, 01 = output, 10=special function, 11=reserved - - * bit 0,1 = pin 0, 2,3= pin 1... - * - * CPBUP = pull up resistor control, 1=disabled, 0=enabled -*/ - -#define S3C2410_GPBCON S3C2410_GPIOREG(0x10) -#define S3C2410_GPBDAT S3C2410_GPIOREG(0x14) -#define S3C2410_GPBUP S3C2410_GPIOREG(0x18) - -/* no i/o pin in port b can have value 3 (unless it is a s3c2443) ! */ - -#define S3C2410_GPB0_TOUT0 (0x02 << 0) - -#define S3C2410_GPB1_TOUT1 (0x02 << 2) - -#define S3C2410_GPB2_TOUT2 (0x02 << 4) - -#define S3C2410_GPB3_TOUT3 (0x02 << 6) - -#define S3C2410_GPB4_TCLK0 (0x02 << 8) -#define S3C2410_GPB4_MASK (0x03 << 8) - -#define S3C2410_GPB5_nXBACK (0x02 << 10) -#define S3C2443_GPB5_XBACK (0x03 << 10) - -#define S3C2410_GPB6_nXBREQ (0x02 << 12) -#define S3C2443_GPB6_XBREQ (0x03 << 12) - -#define S3C2410_GPB7_nXDACK1 (0x02 << 14) -#define S3C2443_GPB7_XDACK1 (0x03 << 14) - -#define S3C2410_GPB8_nXDREQ1 (0x02 << 16) - -#define S3C2410_GPB9_nXDACK0 (0x02 << 18) -#define S3C2443_GPB9_XDACK0 (0x03 << 18) - -#define S3C2410_GPB10_nXDRE0 (0x02 << 20) -#define S3C2443_GPB10_XDREQ0 (0x03 << 20) - -#define S3C2410_GPB_PUPDIS(x) (1<<(x)) - -/* Port C consits of 16 GPIO/Special function - * - * almost identical setup to port b, but the special functions are mostly - * to do with the video system's sync/etc. -*/ - -#define S3C2410_GPCCON S3C2410_GPIOREG(0x20) -#define S3C2410_GPCDAT S3C2410_GPIOREG(0x24) -#define S3C2410_GPCUP S3C2410_GPIOREG(0x28) -#define S3C2410_GPC0_LEND (0x02 << 0) -#define S3C2410_GPC1_VCLK (0x02 << 2) -#define S3C2410_GPC2_VLINE (0x02 << 4) -#define S3C2410_GPC3_VFRAME (0x02 << 6) -#define S3C2410_GPC4_VM (0x02 << 8) -#define S3C2410_GPC5_LCDVF0 (0x02 << 10) -#define S3C2410_GPC6_LCDVF1 (0x02 << 12) -#define S3C2410_GPC7_LCDVF2 (0x02 << 14) -#define S3C2410_GPC8_VD0 (0x02 << 16) -#define S3C2410_GPC9_VD1 (0x02 << 18) -#define S3C2410_GPC10_VD2 (0x02 << 20) -#define S3C2410_GPC11_VD3 (0x02 << 22) -#define S3C2410_GPC12_VD4 (0x02 << 24) -#define S3C2410_GPC13_VD5 (0x02 << 26) -#define S3C2410_GPC14_VD6 (0x02 << 28) -#define S3C2410_GPC15_VD7 (0x02 << 30) -#define S3C2410_GPC_PUPDIS(x) (1<<(x)) - -/* - * S3C2410: Port D consists of 16 GPIO/Special function - * - * almost identical setup to port b, but the special functions are mostly - * to do with the video system's data. - * - * almost identical setup to port c -*/ - -#define S3C2410_GPDCON S3C2410_GPIOREG(0x30) -#define S3C2410_GPDDAT S3C2410_GPIOREG(0x34) -#define S3C2410_GPDUP S3C2410_GPIOREG(0x38) - -#define S3C2410_GPD0_VD8 (0x02 << 0) -#define S3C2442_GPD0_nSPICS1 (0x03 << 0) - -#define S3C2410_GPD1_VD9 (0x02 << 2) -#define S3C2442_GPD1_SPICLK1 (0x03 << 2) - -#define S3C2410_GPD2_VD10 (0x02 << 4) - -#define S3C2410_GPD3_VD11 (0x02 << 6) - -#define S3C2410_GPD4_VD12 (0x02 << 8) - -#define S3C2410_GPD5_VD13 (0x02 << 10) - -#define S3C2410_GPD6_VD14 (0x02 << 12) - -#define S3C2410_GPD7_VD15 (0x02 << 14) - -#define S3C2410_GPD8_VD16 (0x02 << 16) -#define S3C2440_GPD8_SPIMISO1 (0x03 << 16) - -#define S3C2410_GPD9_VD17 (0x02 << 18) -#define S3C2440_GPD9_SPIMOSI1 (0x03 << 18) - -#define S3C2410_GPD10_VD18 (0x02 << 20) -#define S3C2440_GPD10_SPICLK1 (0x03 << 20) - -#define S3C2410_GPD11_VD19 (0x02 << 22) - -#define S3C2410_GPD12_VD20 (0x02 << 24) - -#define S3C2410_GPD13_VD21 (0x02 << 26) - -#define S3C2410_GPD14_VD22 (0x02 << 28) -#define S3C2410_GPD14_nSS1 (0x03 << 28) - -#define S3C2410_GPD15_VD23 (0x02 << 30) -#define S3C2410_GPD15_nSS0 (0x03 << 30) - -#define S3C2410_GPD_PUPDIS(x) (1<<(x)) - -/* S3C2410: - * Port E consists of 16 GPIO/Special function - * - * again, the same as port B, but dealing with I2S, SDI, and - * more miscellaneous functions - * - * GPIO / interrupt inputs -*/ - -#define S3C2410_GPECON S3C2410_GPIOREG(0x40) -#define S3C2410_GPEDAT S3C2410_GPIOREG(0x44) -#define S3C2410_GPEUP S3C2410_GPIOREG(0x48) - -#define S3C2410_GPE0_I2SLRCK (0x02 << 0) -#define S3C2443_GPE0_AC_nRESET (0x03 << 0) -#define S3C2410_GPE0_MASK (0x03 << 0) - -#define S3C2410_GPE1_I2SSCLK (0x02 << 2) -#define S3C2443_GPE1_AC_SYNC (0x03 << 2) -#define S3C2410_GPE1_MASK (0x03 << 2) - -#define S3C2410_GPE2_CDCLK (0x02 << 4) -#define S3C2443_GPE2_AC_BITCLK (0x03 << 4) - -#define S3C2410_GPE3_I2SSDI (0x02 << 6) -#define S3C2443_GPE3_AC_SDI (0x03 << 6) -#define S3C2410_GPE3_nSS0 (0x03 << 6) -#define S3C2410_GPE3_MASK (0x03 << 6) - -#define S3C2410_GPE4_I2SSDO (0x02 << 8) -#define S3C2443_GPE4_AC_SDO (0x03 << 8) -#define S3C2410_GPE4_I2SSDI (0x03 << 8) -#define S3C2410_GPE4_MASK (0x03 << 8) - -#define S3C2410_GPE5_SDCLK (0x02 << 10) -#define S3C2443_GPE5_SD1_CLK (0x02 << 10) -#define S3C2443_GPE5_AC_BITCLK (0x03 << 10) - -#define S3C2410_GPE6_SDCMD (0x02 << 12) -#define S3C2443_GPE6_SD1_CMD (0x02 << 12) -#define S3C2443_GPE6_AC_SDI (0x03 << 12) - -#define S3C2410_GPE7_SDDAT0 (0x02 << 14) -#define S3C2443_GPE5_SD1_DAT0 (0x02 << 14) -#define S3C2443_GPE7_AC_SDO (0x03 << 14) - -#define S3C2410_GPE8_SDDAT1 (0x02 << 16) -#define S3C2443_GPE8_SD1_DAT1 (0x02 << 16) -#define S3C2443_GPE8_AC_SYNC (0x03 << 16) - -#define S3C2410_GPE9_SDDAT2 (0x02 << 18) -#define S3C2443_GPE9_SD1_DAT2 (0x02 << 18) -#define S3C2443_GPE9_AC_nRESET (0x03 << 18) - -#define S3C2410_GPE10_SDDAT3 (0x02 << 20) -#define S3C2443_GPE10_SD1_DAT3 (0x02 << 20) - -#define S3C2410_GPE11_SPIMISO0 (0x02 << 22) - -#define S3C2410_GPE12_SPIMOSI0 (0x02 << 24) - -#define S3C2410_GPE13_SPICLK0 (0x02 << 26) - -#define S3C2410_GPE14_IICSCL (0x02 << 28) -#define S3C2410_GPE14_MASK (0x03 << 28) - -#define S3C2410_GPE15_IICSDA (0x02 << 30) -#define S3C2410_GPE15_MASK (0x03 << 30) - -#define S3C2440_GPE0_ACSYNC (0x03 << 0) -#define S3C2440_GPE1_ACBITCLK (0x03 << 2) -#define S3C2440_GPE2_ACRESET (0x03 << 4) -#define S3C2440_GPE3_ACIN (0x03 << 6) -#define S3C2440_GPE4_ACOUT (0x03 << 8) - -#define S3C2410_GPE_PUPDIS(x) (1<<(x)) - -/* S3C2410: - * Port F consists of 8 GPIO/Special function - * - * GPIO / interrupt inputs - * - * GPFCON has 2 bits for each of the input pins on port F - * 00 = 0 input, 1 output, 2 interrupt (EINT0..7), 3 undefined - * - * pull up works like all other ports. - * - * GPIO/serial/misc pins -*/ - -#define S3C2410_GPFCON S3C2410_GPIOREG(0x50) -#define S3C2410_GPFDAT S3C2410_GPIOREG(0x54) -#define S3C2410_GPFUP S3C2410_GPIOREG(0x58) - -#define S3C2410_GPF0_EINT0 (0x02 << 0) -#define S3C2410_GPF1_EINT1 (0x02 << 2) -#define S3C2410_GPF2_EINT2 (0x02 << 4) -#define S3C2410_GPF3_EINT3 (0x02 << 6) -#define S3C2410_GPF4_EINT4 (0x02 << 8) -#define S3C2410_GPF5_EINT5 (0x02 << 10) -#define S3C2410_GPF6_EINT6 (0x02 << 12) -#define S3C2410_GPF7_EINT7 (0x02 << 14) -#define S3C2410_GPF_PUPDIS(x) (1<<(x)) - -/* S3C2410: - * Port G consists of 8 GPIO/IRQ/Special function - * - * GPGCON has 2 bits for each of the input pins on port F - * 00 = 0 input, 1 output, 2 interrupt (EINT0..7), 3 special func - * - * pull up works like all other ports. -*/ - -#define S3C2410_GPGCON S3C2410_GPIOREG(0x60) -#define S3C2410_GPGDAT S3C2410_GPIOREG(0x64) -#define S3C2410_GPGUP S3C2410_GPIOREG(0x68) - -#define S3C2410_GPG0_EINT8 (0x02 << 0) - -#define S3C2410_GPG1_EINT9 (0x02 << 2) - -#define S3C2410_GPG2_EINT10 (0x02 << 4) -#define S3C2410_GPG2_nSS0 (0x03 << 4) - -#define S3C2410_GPG3_EINT11 (0x02 << 6) -#define S3C2410_GPG3_nSS1 (0x03 << 6) - -#define S3C2410_GPG4_EINT12 (0x02 << 8) -#define S3C2410_GPG4_LCDPWREN (0x03 << 8) -#define S3C2443_GPG4_LCDPWRDN (0x03 << 8) - -#define S3C2410_GPG5_EINT13 (0x02 << 10) -#define S3C2410_GPG5_SPIMISO1 (0x03 << 10) /* not s3c2443 */ - -#define S3C2410_GPG6_EINT14 (0x02 << 12) -#define S3C2410_GPG6_SPIMOSI1 (0x03 << 12) - -#define S3C2410_GPG7_EINT15 (0x02 << 14) -#define S3C2410_GPG7_SPICLK1 (0x03 << 14) - -#define S3C2410_GPG8_EINT16 (0x02 << 16) - -#define S3C2410_GPG9_EINT17 (0x02 << 18) - -#define S3C2410_GPG10_EINT18 (0x02 << 20) - -#define S3C2410_GPG11_EINT19 (0x02 << 22) -#define S3C2410_GPG11_TCLK1 (0x03 << 22) -#define S3C2443_GPG11_CF_nIREQ (0x03 << 22) - -#define S3C2410_GPG12_EINT20 (0x02 << 24) -#define S3C2410_GPG12_XMON (0x03 << 24) -#define S3C2442_GPG12_nSPICS0 (0x03 << 24) -#define S3C2443_GPG12_nINPACK (0x03 << 24) - -#define S3C2410_GPG13_EINT21 (0x02 << 26) -#define S3C2410_GPG13_nXPON (0x03 << 26) -#define S3C2443_GPG13_CF_nREG (0x03 << 26) - -#define S3C2410_GPG14_EINT22 (0x02 << 28) -#define S3C2410_GPG14_YMON (0x03 << 28) -#define S3C2443_GPG14_CF_RESET (0x03 << 28) - -#define S3C2410_GPG15_EINT23 (0x02 << 30) -#define S3C2410_GPG15_nYPON (0x03 << 30) -#define S3C2443_GPG15_CF_PWR (0x03 << 30) - -#define S3C2410_GPG_PUPDIS(x) (1<<(x)) - -/* Port H consists of11 GPIO/serial/Misc pins - * - * GPGCON has 2 bits for each of the input pins on port F - * 00 = 0 input, 1 output, 2 interrupt (EINT0..7), 3 special func - * - * pull up works like all other ports. -*/ - -#define S3C2410_GPHCON S3C2410_GPIOREG(0x70) -#define S3C2410_GPHDAT S3C2410_GPIOREG(0x74) -#define S3C2410_GPHUP S3C2410_GPIOREG(0x78) - -#define S3C2410_GPH0_nCTS0 (0x02 << 0) -#define S3C2416_GPH0_TXD0 (0x02 << 0) - -#define S3C2410_GPH1_nRTS0 (0x02 << 2) -#define S3C2416_GPH1_RXD0 (0x02 << 2) - -#define S3C2410_GPH2_TXD0 (0x02 << 4) -#define S3C2416_GPH2_TXD1 (0x02 << 4) - -#define S3C2410_GPH3_RXD0 (0x02 << 6) -#define S3C2416_GPH3_RXD1 (0x02 << 6) - -#define S3C2410_GPH4_TXD1 (0x02 << 8) -#define S3C2416_GPH4_TXD2 (0x02 << 8) - -#define S3C2410_GPH5_RXD1 (0x02 << 10) -#define S3C2416_GPH5_RXD2 (0x02 << 10) - -#define S3C2410_GPH6_TXD2 (0x02 << 12) -#define S3C2416_GPH6_TXD3 (0x02 << 12) -#define S3C2410_GPH6_nRTS1 (0x03 << 12) -#define S3C2416_GPH6_nRTS2 (0x03 << 12) - -#define S3C2410_GPH7_RXD2 (0x02 << 14) -#define S3C2416_GPH7_RXD3 (0x02 << 14) -#define S3C2410_GPH7_nCTS1 (0x03 << 14) -#define S3C2416_GPH7_nCTS2 (0x03 << 14) - -#define S3C2410_GPH8_UCLK (0x02 << 16) -#define S3C2416_GPH8_nCTS0 (0x02 << 16) - -#define S3C2410_GPH9_CLKOUT0 (0x02 << 18) -#define S3C2442_GPH9_nSPICS0 (0x03 << 18) -#define S3C2416_GPH9_nRTS0 (0x02 << 18) - -#define S3C2410_GPH10_CLKOUT1 (0x02 << 20) -#define S3C2416_GPH10_nCTS1 (0x02 << 20) - -#define S3C2416_GPH11_nRTS1 (0x02 << 22) - -#define S3C2416_GPH12_EXTUARTCLK (0x02 << 24) - -#define S3C2416_GPH13_CLKOUT0 (0x02 << 26) - -#define S3C2416_GPH14_CLKOUT1 (0x02 << 28) - -/* The S3C2412 and S3C2413 move the GPJ register set to after - * GPH, which means all registers after 0x80 are now offset by 0x10 - * for the 2412/2413 from the 2410/2440/2442 -*/ - -/* S3C2443 and above */ -#define S3C2440_GPJCON S3C2410_GPIOREG(0xD0) -#define S3C2440_GPJDAT S3C2410_GPIOREG(0xD4) -#define S3C2440_GPJUP S3C2410_GPIOREG(0xD8) - -#define S3C2443_GPKCON S3C2410_GPIOREG(0xE0) -#define S3C2443_GPKDAT S3C2410_GPIOREG(0xE4) -#define S3C2443_GPKUP S3C2410_GPIOREG(0xE8) - -#define S3C2443_GPLCON S3C2410_GPIOREG(0xF0) -#define S3C2443_GPLDAT S3C2410_GPIOREG(0xF4) -#define S3C2443_GPLUP S3C2410_GPIOREG(0xF8) - -#define S3C2443_GPMCON S3C2410_GPIOREG(0x100) -#define S3C2443_GPMDAT S3C2410_GPIOREG(0x104) -#define S3C2443_GPMUP S3C2410_GPIOREG(0x108) - -/* miscellaneous control */ -#define S3C2410_MISCCR S3C2410_GPIOREG(0x80) -#define S3C2410_DCLKCON S3C2410_GPIOREG(0x84) - -#define S3C24XX_DCLKCON S3C24XX_GPIOREG2(0x84) - -/* see clock.h for dclk definitions */ - -/* pullup control on databus */ -#define S3C2410_MISCCR_SPUCR_HEN (0<<0) -#define S3C2410_MISCCR_SPUCR_HDIS (1<<0) -#define S3C2410_MISCCR_SPUCR_LEN (0<<1) -#define S3C2410_MISCCR_SPUCR_LDIS (1<<1) - -#define S3C2410_MISCCR_USBDEV (0<<3) -#define S3C2410_MISCCR_USBHOST (1<<3) - -#define S3C2410_MISCCR_CLK0_MPLL (0<<4) -#define S3C2410_MISCCR_CLK0_UPLL (1<<4) -#define S3C2410_MISCCR_CLK0_FCLK (2<<4) -#define S3C2410_MISCCR_CLK0_HCLK (3<<4) -#define S3C2410_MISCCR_CLK0_PCLK (4<<4) -#define S3C2410_MISCCR_CLK0_DCLK0 (5<<4) -#define S3C2410_MISCCR_CLK0_MASK (7<<4) - -#define S3C2412_MISCCR_CLK0_RTC (2<<4) - -#define S3C2410_MISCCR_CLK1_MPLL (0<<8) -#define S3C2410_MISCCR_CLK1_UPLL (1<<8) -#define S3C2410_MISCCR_CLK1_FCLK (2<<8) -#define S3C2410_MISCCR_CLK1_HCLK (3<<8) -#define S3C2410_MISCCR_CLK1_PCLK (4<<8) -#define S3C2410_MISCCR_CLK1_DCLK1 (5<<8) -#define S3C2410_MISCCR_CLK1_MASK (7<<8) - -#define S3C2412_MISCCR_CLK1_CLKsrc (0<<8) - -#define S3C2410_MISCCR_USBSUSPND0 (1<<12) -#define S3C2416_MISCCR_SEL_SUSPND (1<<12) -#define S3C2410_MISCCR_USBSUSPND1 (1<<13) - -#define S3C2410_MISCCR_nRSTCON (1<<16) - -#define S3C2410_MISCCR_nEN_SCLK0 (1<<17) -#define S3C2410_MISCCR_nEN_SCLK1 (1<<18) -#define S3C2410_MISCCR_nEN_SCLKE (1<<19) /* not 2412 */ -#define S3C2410_MISCCR_SDSLEEP (7<<17) - -#define S3C2416_MISCCR_FLT_I2C (1<<24) -#define S3C2416_MISCCR_HSSPI_EN2 (1<<31) - -/* external interrupt control... */ -/* S3C2410_EXTINT0 -> irq sense control for EINT0..EINT7 - * S3C2410_EXTINT1 -> irq sense control for EINT8..EINT15 - * S3C2410_EXTINT2 -> irq sense control for EINT16..EINT23 - * - * note S3C2410_EXTINT2 has filtering options for EINT16..EINT23 - * - * Samsung datasheet p9-25 -*/ -#define S3C2410_EXTINT0 S3C2410_GPIOREG(0x88) -#define S3C2410_EXTINT1 S3C2410_GPIOREG(0x8C) -#define S3C2410_EXTINT2 S3C2410_GPIOREG(0x90) - -#define S3C24XX_EXTINT0 S3C24XX_GPIOREG2(0x88) -#define S3C24XX_EXTINT1 S3C24XX_GPIOREG2(0x8C) -#define S3C24XX_EXTINT2 S3C24XX_GPIOREG2(0x90) - -/* interrupt filtering conrrol for EINT16..EINT23 */ -#define S3C2410_EINFLT0 S3C2410_GPIOREG(0x94) -#define S3C2410_EINFLT1 S3C2410_GPIOREG(0x98) -#define S3C2410_EINFLT2 S3C2410_GPIOREG(0x9C) -#define S3C2410_EINFLT3 S3C2410_GPIOREG(0xA0) - -#define S3C24XX_EINFLT0 S3C24XX_GPIOREG2(0x94) -#define S3C24XX_EINFLT1 S3C24XX_GPIOREG2(0x98) -#define S3C24XX_EINFLT2 S3C24XX_GPIOREG2(0x9C) -#define S3C24XX_EINFLT3 S3C24XX_GPIOREG2(0xA0) - -/* values for interrupt filtering */ -#define S3C2410_EINTFLT_PCLK (0x00) -#define S3C2410_EINTFLT_EXTCLK (1<<7) -#define S3C2410_EINTFLT_WIDTHMSK(x) ((x) & 0x3f) - -/* removed EINTxxxx defs from here, not meant for this */ - -/* GSTATUS have miscellaneous information in them - * - * These move between s3c2410 and s3c2412 style systems. - */ - -#define S3C2410_GSTATUS0 S3C2410_GPIOREG(0x0AC) -#define S3C2410_GSTATUS1 S3C2410_GPIOREG(0x0B0) -#define S3C2410_GSTATUS2 S3C2410_GPIOREG(0x0B4) -#define S3C2410_GSTATUS3 S3C2410_GPIOREG(0x0B8) -#define S3C2410_GSTATUS4 S3C2410_GPIOREG(0x0BC) - -#define S3C2412_GSTATUS0 S3C2410_GPIOREG(0x0BC) -#define S3C2412_GSTATUS1 S3C2410_GPIOREG(0x0C0) -#define S3C2412_GSTATUS2 S3C2410_GPIOREG(0x0C4) -#define S3C2412_GSTATUS3 S3C2410_GPIOREG(0x0C8) -#define S3C2412_GSTATUS4 S3C2410_GPIOREG(0x0CC) - -#define S3C24XX_GSTATUS0 S3C24XX_GPIOREG2(0x0AC) -#define S3C24XX_GSTATUS1 S3C24XX_GPIOREG2(0x0B0) -#define S3C24XX_GSTATUS2 S3C24XX_GPIOREG2(0x0B4) -#define S3C24XX_GSTATUS3 S3C24XX_GPIOREG2(0x0B8) -#define S3C24XX_GSTATUS4 S3C24XX_GPIOREG2(0x0BC) - -#define S3C2410_GSTATUS0_nWAIT (1<<3) -#define S3C2410_GSTATUS0_NCON (1<<2) -#define S3C2410_GSTATUS0_RnB (1<<1) -#define S3C2410_GSTATUS0_nBATTFLT (1<<0) - -#define S3C2410_GSTATUS1_IDMASK (0xffff0000) -#define S3C2410_GSTATUS1_2410 (0x32410000) -#define S3C2410_GSTATUS1_2412 (0x32412001) -#define S3C2410_GSTATUS1_2416 (0x32416003) -#define S3C2410_GSTATUS1_2440 (0x32440000) -#define S3C2410_GSTATUS1_2442 (0x32440aaa) -/* some 2416 CPUs report this value also */ -#define S3C2410_GSTATUS1_2450 (0x32450003) - -#define S3C2410_GSTATUS2_WTRESET (1<<2) -#define S3C2410_GSTATUS2_OFFRESET (1<<1) -#define S3C2410_GSTATUS2_PONRESET (1<<0) - -/* 2412/2413 sleep configuration registers */ - -#define S3C2412_GPBSLPCON S3C2410_GPIOREG(0x1C) -#define S3C2412_GPCSLPCON S3C2410_GPIOREG(0x2C) -#define S3C2412_GPDSLPCON S3C2410_GPIOREG(0x3C) -#define S3C2412_GPFSLPCON S3C2410_GPIOREG(0x5C) -#define S3C2412_GPGSLPCON S3C2410_GPIOREG(0x6C) -#define S3C2412_GPHSLPCON S3C2410_GPIOREG(0x7C) - -/* definitions for each pin bit */ -#define S3C2412_GPIO_SLPCON_LOW ( 0x00 ) -#define S3C2412_GPIO_SLPCON_HIGH ( 0x01 ) -#define S3C2412_GPIO_SLPCON_IN ( 0x02 ) -#define S3C2412_GPIO_SLPCON_PULL ( 0x03 ) - -#define S3C2412_SLPCON_LOW(x) ( 0x00 << ((x) * 2)) -#define S3C2412_SLPCON_HIGH(x) ( 0x01 << ((x) * 2)) -#define S3C2412_SLPCON_IN(x) ( 0x02 << ((x) * 2)) -#define S3C2412_SLPCON_PULL(x) ( 0x03 << ((x) * 2)) -#define S3C2412_SLPCON_EINT(x) ( 0x02 << ((x) * 2)) /* only IRQ pins */ -#define S3C2412_SLPCON_MASK(x) ( 0x03 << ((x) * 2)) - -#define S3C2412_SLPCON_ALL_LOW (0x0) -#define S3C2412_SLPCON_ALL_HIGH (0x11111111 | 0x44444444) -#define S3C2412_SLPCON_ALL_IN (0x22222222 | 0x88888888) -#define S3C2412_SLPCON_ALL_PULL (0x33333333) - -#endif /* __ASM_ARCH_REGS_GPIO_H */ - diff --git a/arch/arm/mach-s3c2410/include/mach/regs-gpioj.h b/arch/arm/mach-s3c2410/include/mach/regs-gpioj.h deleted file mode 100644 index 19575e061114..000000000000 --- a/arch/arm/mach-s3c2410/include/mach/regs-gpioj.h +++ /dev/null @@ -1,70 +0,0 @@ -/* arch/arm/mach-s3c2410/include/mach/regs-gpioj.h - * - * Copyright (c) 2004 Simtec Electronics - * http://www.simtec.co.uk/products/SWLINUX/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * S3C2440 GPIO J register definitions -*/ - - -#ifndef __ASM_ARCH_REGS_GPIOJ_H -#define __ASM_ARCH_REGS_GPIOJ_H "gpioj" - -/* Port J consists of 13 GPIO/Camera pins - * - * GPJCON has 2 bits for each of the input pins on port F - * 00 = 0 input, 1 output, 2 Camera - * - * pull up works like all other ports. -*/ - -#define S3C2413_GPJCON S3C2410_GPIOREG(0x80) -#define S3C2413_GPJDAT S3C2410_GPIOREG(0x84) -#define S3C2413_GPJUP S3C2410_GPIOREG(0x88) -#define S3C2413_GPJSLPCON S3C2410_GPIOREG(0x8C) - -#define S3C2440_GPJ0_OUTP (0x01 << 0) -#define S3C2440_GPJ0_CAMDATA0 (0x02 << 0) - -#define S3C2440_GPJ1_OUTP (0x01 << 2) -#define S3C2440_GPJ1_CAMDATA1 (0x02 << 2) - -#define S3C2440_GPJ2_OUTP (0x01 << 4) -#define S3C2440_GPJ2_CAMDATA2 (0x02 << 4) - -#define S3C2440_GPJ3_OUTP (0x01 << 6) -#define S3C2440_GPJ3_CAMDATA3 (0x02 << 6) - -#define S3C2440_GPJ4_OUTP (0x01 << 8) -#define S3C2440_GPJ4_CAMDATA4 (0x02 << 8) - -#define S3C2440_GPJ5_OUTP (0x01 << 10) -#define S3C2440_GPJ5_CAMDATA5 (0x02 << 10) - -#define S3C2440_GPJ6_OUTP (0x01 << 12) -#define S3C2440_GPJ6_CAMDATA6 (0x02 << 12) - -#define S3C2440_GPJ7_OUTP (0x01 << 14) -#define S3C2440_GPJ7_CAMDATA7 (0x02 << 14) - -#define S3C2440_GPJ8_OUTP (0x01 << 16) -#define S3C2440_GPJ8_CAMPCLK (0x02 << 16) - -#define S3C2440_GPJ9_OUTP (0x01 << 18) -#define S3C2440_GPJ9_CAMVSYNC (0x02 << 18) - -#define S3C2440_GPJ10_OUTP (0x01 << 20) -#define S3C2440_GPJ10_CAMHREF (0x02 << 20) - -#define S3C2440_GPJ11_OUTP (0x01 << 22) -#define S3C2440_GPJ11_CAMCLKOUT (0x02 << 22) - -#define S3C2440_GPJ12_OUTP (0x01 << 24) -#define S3C2440_GPJ12_CAMRESET (0x02 << 24) - -#endif /* __ASM_ARCH_REGS_GPIOJ_H */ - diff --git a/arch/arm/mach-s3c2410/include/mach/regs-irq.h b/arch/arm/mach-s3c2410/include/mach/regs-irq.h deleted file mode 100644 index 0f07ba30b1fb..000000000000 --- a/arch/arm/mach-s3c2410/include/mach/regs-irq.h +++ /dev/null @@ -1,53 +0,0 @@ -/* arch/arm/mach-s3c2410/include/mach/regs-irq.h - * - * Copyright (c) 2003 Simtec Electronics - * http://www.simtec.co.uk/products/SWLINUX/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - - -#ifndef ___ASM_ARCH_REGS_IRQ_H -#define ___ASM_ARCH_REGS_IRQ_H - -/* interrupt controller */ - -#define S3C2410_IRQREG(x) ((x) + S3C24XX_VA_IRQ) -#define S3C2410_EINTREG(x) ((x) + S3C24XX_VA_GPIO) -#define S3C24XX_EINTREG(x) ((x) + S3C24XX_VA_GPIO2) - -#define S3C2410_SRCPND S3C2410_IRQREG(0x000) -#define S3C2410_INTMOD S3C2410_IRQREG(0x004) -#define S3C2410_INTMSK S3C2410_IRQREG(0x008) -#define S3C2410_PRIORITY S3C2410_IRQREG(0x00C) -#define S3C2410_INTPND S3C2410_IRQREG(0x010) -#define S3C2410_INTOFFSET S3C2410_IRQREG(0x014) -#define S3C2410_SUBSRCPND S3C2410_IRQREG(0x018) -#define S3C2410_INTSUBMSK S3C2410_IRQREG(0x01C) - -#define S3C2416_PRIORITY_MODE1 S3C2410_IRQREG(0x030) -#define S3C2416_PRIORITY_UPDATE1 S3C2410_IRQREG(0x034) -#define S3C2416_SRCPND2 S3C2410_IRQREG(0x040) -#define S3C2416_INTMOD2 S3C2410_IRQREG(0x044) -#define S3C2416_INTMSK2 S3C2410_IRQREG(0x048) -#define S3C2416_INTPND2 S3C2410_IRQREG(0x050) -#define S3C2416_INTOFFSET2 S3C2410_IRQREG(0x054) -#define S3C2416_PRIORITY_MODE2 S3C2410_IRQREG(0x070) -#define S3C2416_PRIORITY_UPDATE2 S3C2410_IRQREG(0x074) - -/* mask: 0=enable, 1=disable - * 1 bit EINT, 4=EINT4, 23=EINT23 - * EINT0,1,2,3 are not handled here. -*/ - -#define S3C2410_EINTMASK S3C2410_EINTREG(0x0A4) -#define S3C2410_EINTPEND S3C2410_EINTREG(0X0A8) -#define S3C2412_EINTMASK S3C2410_EINTREG(0x0B4) -#define S3C2412_EINTPEND S3C2410_EINTREG(0X0B8) - -#define S3C24XX_EINTMASK S3C24XX_EINTREG(0x0A4) -#define S3C24XX_EINTPEND S3C24XX_EINTREG(0X0A8) - -#endif /* ___ASM_ARCH_REGS_IRQ_H */ diff --git a/arch/arm/mach-s3c2410/include/mach/regs-lcd.h b/arch/arm/mach-s3c2410/include/mach/regs-lcd.h deleted file mode 100644 index ee8f040aff5f..000000000000 --- a/arch/arm/mach-s3c2410/include/mach/regs-lcd.h +++ /dev/null @@ -1,162 +0,0 @@ -/* arch/arm/mach-s3c2410/include/mach/regs-lcd.h - * - * Copyright (c) 2003 Simtec Electronics - * http://www.simtec.co.uk/products/SWLINUX/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - - -#ifndef ___ASM_ARCH_REGS_LCD_H -#define ___ASM_ARCH_REGS_LCD_H - -#define S3C2410_LCDREG(x) (x) - -/* LCD control registers */ -#define S3C2410_LCDCON1 S3C2410_LCDREG(0x00) -#define S3C2410_LCDCON2 S3C2410_LCDREG(0x04) -#define S3C2410_LCDCON3 S3C2410_LCDREG(0x08) -#define S3C2410_LCDCON4 S3C2410_LCDREG(0x0C) -#define S3C2410_LCDCON5 S3C2410_LCDREG(0x10) - -#define S3C2410_LCDCON1_CLKVAL(x) ((x) << 8) -#define S3C2410_LCDCON1_MMODE (1<<7) -#define S3C2410_LCDCON1_DSCAN4 (0<<5) -#define S3C2410_LCDCON1_STN4 (1<<5) -#define S3C2410_LCDCON1_STN8 (2<<5) -#define S3C2410_LCDCON1_TFT (3<<5) - -#define S3C2410_LCDCON1_STN1BPP (0<<1) -#define S3C2410_LCDCON1_STN2GREY (1<<1) -#define S3C2410_LCDCON1_STN4GREY (2<<1) -#define S3C2410_LCDCON1_STN8BPP (3<<1) -#define S3C2410_LCDCON1_STN12BPP (4<<1) - -#define S3C2410_LCDCON1_TFT1BPP (8<<1) -#define S3C2410_LCDCON1_TFT2BPP (9<<1) -#define S3C2410_LCDCON1_TFT4BPP (10<<1) -#define S3C2410_LCDCON1_TFT8BPP (11<<1) -#define S3C2410_LCDCON1_TFT16BPP (12<<1) -#define S3C2410_LCDCON1_TFT24BPP (13<<1) - -#define S3C2410_LCDCON1_ENVID (1) - -#define S3C2410_LCDCON1_MODEMASK 0x1E - -#define S3C2410_LCDCON2_VBPD(x) ((x) << 24) -#define S3C2410_LCDCON2_LINEVAL(x) ((x) << 14) -#define S3C2410_LCDCON2_VFPD(x) ((x) << 6) -#define S3C2410_LCDCON2_VSPW(x) ((x) << 0) - -#define S3C2410_LCDCON2_GET_VBPD(x) ( ((x) >> 24) & 0xFF) -#define S3C2410_LCDCON2_GET_VFPD(x) ( ((x) >> 6) & 0xFF) -#define S3C2410_LCDCON2_GET_VSPW(x) ( ((x) >> 0) & 0x3F) - -#define S3C2410_LCDCON3_HBPD(x) ((x) << 19) -#define S3C2410_LCDCON3_WDLY(x) ((x) << 19) -#define S3C2410_LCDCON3_HOZVAL(x) ((x) << 8) -#define S3C2410_LCDCON3_HFPD(x) ((x) << 0) -#define S3C2410_LCDCON3_LINEBLANK(x)((x) << 0) - -#define S3C2410_LCDCON3_GET_HBPD(x) ( ((x) >> 19) & 0x7F) -#define S3C2410_LCDCON3_GET_HFPD(x) ( ((x) >> 0) & 0xFF) - -/* LDCCON4 changes for STN mode on the S3C2412 */ - -#define S3C2410_LCDCON4_MVAL(x) ((x) << 8) -#define S3C2410_LCDCON4_HSPW(x) ((x) << 0) -#define S3C2410_LCDCON4_WLH(x) ((x) << 0) - -#define S3C2410_LCDCON4_GET_HSPW(x) ( ((x) >> 0) & 0xFF) - -#define S3C2410_LCDCON5_BPP24BL (1<<12) -#define S3C2410_LCDCON5_FRM565 (1<<11) -#define S3C2410_LCDCON5_INVVCLK (1<<10) -#define S3C2410_LCDCON5_INVVLINE (1<<9) -#define S3C2410_LCDCON5_INVVFRAME (1<<8) -#define S3C2410_LCDCON5_INVVD (1<<7) -#define S3C2410_LCDCON5_INVVDEN (1<<6) -#define S3C2410_LCDCON5_INVPWREN (1<<5) -#define S3C2410_LCDCON5_INVLEND (1<<4) -#define S3C2410_LCDCON5_PWREN (1<<3) -#define S3C2410_LCDCON5_ENLEND (1<<2) -#define S3C2410_LCDCON5_BSWP (1<<1) -#define S3C2410_LCDCON5_HWSWP (1<<0) - -/* framebuffer start addressed */ -#define S3C2410_LCDSADDR1 S3C2410_LCDREG(0x14) -#define S3C2410_LCDSADDR2 S3C2410_LCDREG(0x18) -#define S3C2410_LCDSADDR3 S3C2410_LCDREG(0x1C) - -#define S3C2410_LCDBANK(x) ((x) << 21) -#define S3C2410_LCDBASEU(x) (x) - -#define S3C2410_OFFSIZE(x) ((x) << 11) -#define S3C2410_PAGEWIDTH(x) (x) - -/* colour lookup and miscellaneous controls */ - -#define S3C2410_REDLUT S3C2410_LCDREG(0x20) -#define S3C2410_GREENLUT S3C2410_LCDREG(0x24) -#define S3C2410_BLUELUT S3C2410_LCDREG(0x28) - -#define S3C2410_DITHMODE S3C2410_LCDREG(0x4C) -#define S3C2410_TPAL S3C2410_LCDREG(0x50) - -#define S3C2410_TPAL_EN (1<<24) - -/* interrupt info */ -#define S3C2410_LCDINTPND S3C2410_LCDREG(0x54) -#define S3C2410_LCDSRCPND S3C2410_LCDREG(0x58) -#define S3C2410_LCDINTMSK S3C2410_LCDREG(0x5C) -#define S3C2410_LCDINT_FIWSEL (1<<2) -#define S3C2410_LCDINT_FRSYNC (1<<1) -#define S3C2410_LCDINT_FICNT (1<<0) - -/* s3c2442 extra stn registers */ - -#define S3C2442_REDLUT S3C2410_LCDREG(0x20) -#define S3C2442_GREENLUT S3C2410_LCDREG(0x24) -#define S3C2442_BLUELUT S3C2410_LCDREG(0x28) -#define S3C2442_DITHMODE S3C2410_LCDREG(0x20) - -#define S3C2410_LPCSEL S3C2410_LCDREG(0x60) - -#define S3C2410_TFTPAL(x) S3C2410_LCDREG((0x400 + (x)*4)) - -/* S3C2412 registers */ - -#define S3C2412_TPAL S3C2410_LCDREG(0x20) - -#define S3C2412_LCDINTPND S3C2410_LCDREG(0x24) -#define S3C2412_LCDSRCPND S3C2410_LCDREG(0x28) -#define S3C2412_LCDINTMSK S3C2410_LCDREG(0x2C) - -#define S3C2412_TCONSEL S3C2410_LCDREG(0x30) - -#define S3C2412_LCDCON6 S3C2410_LCDREG(0x34) -#define S3C2412_LCDCON7 S3C2410_LCDREG(0x38) -#define S3C2412_LCDCON8 S3C2410_LCDREG(0x3C) -#define S3C2412_LCDCON9 S3C2410_LCDREG(0x40) - -#define S3C2412_REDLUT(x) S3C2410_LCDREG(0x44 + ((x)*4)) -#define S3C2412_GREENLUT(x) S3C2410_LCDREG(0x60 + ((x)*4)) -#define S3C2412_BLUELUT(x) S3C2410_LCDREG(0x98 + ((x)*4)) - -#define S3C2412_FRCPAT(x) S3C2410_LCDREG(0xB4 + ((x)*4)) - -/* general registers */ - -/* base of the LCD registers, where INTPND, INTSRC and then INTMSK - * are available. */ - -#define S3C2410_LCDINTBASE S3C2410_LCDREG(0x54) -#define S3C2412_LCDINTBASE S3C2410_LCDREG(0x24) - -#define S3C24XX_LCDINTPND (0x00) -#define S3C24XX_LCDSRCPND (0x04) -#define S3C24XX_LCDINTMSK (0x08) - -#endif /* ___ASM_ARCH_REGS_LCD_H */ diff --git a/arch/arm/mach-s3c2410/include/mach/regs-mem.h b/arch/arm/mach-s3c2410/include/mach/regs-mem.h deleted file mode 100644 index e0c67b0163d8..000000000000 --- a/arch/arm/mach-s3c2410/include/mach/regs-mem.h +++ /dev/null @@ -1,202 +0,0 @@ -/* arch/arm/mach-s3c2410/include/mach/regs-mem.h - * - * Copyright (c) 2004 Simtec Electronics - * http://www.simtec.co.uk/products/SWLINUX/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * S3C2410 Memory Control register definitions -*/ - -#ifndef __ASM_ARM_MEMREGS_H -#define __ASM_ARM_MEMREGS_H - -#ifndef S3C2410_MEMREG -#define S3C2410_MEMREG(x) (S3C24XX_VA_MEMCTRL + (x)) -#endif - -/* bus width, and wait state control */ -#define S3C2410_BWSCON S3C2410_MEMREG(0x0000) - -/* bank zero config - note, pinstrapped from OM pins! */ -#define S3C2410_BWSCON_DW0_16 (1<<1) -#define S3C2410_BWSCON_DW0_32 (2<<1) - -/* bank one configs */ -#define S3C2410_BWSCON_DW1_8 (0<<4) -#define S3C2410_BWSCON_DW1_16 (1<<4) -#define S3C2410_BWSCON_DW1_32 (2<<4) -#define S3C2410_BWSCON_WS1 (1<<6) -#define S3C2410_BWSCON_ST1 (1<<7) - -/* bank 2 configurations */ -#define S3C2410_BWSCON_DW2_8 (0<<8) -#define S3C2410_BWSCON_DW2_16 (1<<8) -#define S3C2410_BWSCON_DW2_32 (2<<8) -#define S3C2410_BWSCON_WS2 (1<<10) -#define S3C2410_BWSCON_ST2 (1<<11) - -/* bank 3 configurations */ -#define S3C2410_BWSCON_DW3_8 (0<<12) -#define S3C2410_BWSCON_DW3_16 (1<<12) -#define S3C2410_BWSCON_DW3_32 (2<<12) -#define S3C2410_BWSCON_WS3 (1<<14) -#define S3C2410_BWSCON_ST3 (1<<15) - -/* bank 4 configurations */ -#define S3C2410_BWSCON_DW4_8 (0<<16) -#define S3C2410_BWSCON_DW4_16 (1<<16) -#define S3C2410_BWSCON_DW4_32 (2<<16) -#define S3C2410_BWSCON_WS4 (1<<18) -#define S3C2410_BWSCON_ST4 (1<<19) - -/* bank 5 configurations */ -#define S3C2410_BWSCON_DW5_8 (0<<20) -#define S3C2410_BWSCON_DW5_16 (1<<20) -#define S3C2410_BWSCON_DW5_32 (2<<20) -#define S3C2410_BWSCON_WS5 (1<<22) -#define S3C2410_BWSCON_ST5 (1<<23) - -/* bank 6 configurations */ -#define S3C2410_BWSCON_DW6_8 (0<<24) -#define S3C2410_BWSCON_DW6_16 (1<<24) -#define S3C2410_BWSCON_DW6_32 (2<<24) -#define S3C2410_BWSCON_WS6 (1<<26) -#define S3C2410_BWSCON_ST6 (1<<27) - -/* bank 7 configurations */ -#define S3C2410_BWSCON_DW7_8 (0<<28) -#define S3C2410_BWSCON_DW7_16 (1<<28) -#define S3C2410_BWSCON_DW7_32 (2<<28) -#define S3C2410_BWSCON_WS7 (1<<30) -#define S3C2410_BWSCON_ST7 (1<<31) - -/* accesor functions for getting BANK(n) configuration. (n != 0) */ - -#define S3C2410_BWSCON_GET(_bwscon, _bank) (((_bwscon) >> ((_bank) * 4)) & 0xf) - -#define S3C2410_BWSCON_DW8 (0) -#define S3C2410_BWSCON_DW16 (1) -#define S3C2410_BWSCON_DW32 (2) -#define S3C2410_BWSCON_WS (1 << 2) -#define S3C2410_BWSCON_ST (1 << 3) - -/* memory set (rom, ram) */ -#define S3C2410_BANKCON0 S3C2410_MEMREG(0x0004) -#define S3C2410_BANKCON1 S3C2410_MEMREG(0x0008) -#define S3C2410_BANKCON2 S3C2410_MEMREG(0x000C) -#define S3C2410_BANKCON3 S3C2410_MEMREG(0x0010) -#define S3C2410_BANKCON4 S3C2410_MEMREG(0x0014) -#define S3C2410_BANKCON5 S3C2410_MEMREG(0x0018) -#define S3C2410_BANKCON6 S3C2410_MEMREG(0x001C) -#define S3C2410_BANKCON7 S3C2410_MEMREG(0x0020) - -/* bank configuration registers */ - -#define S3C2410_BANKCON_PMCnorm (0x00) -#define S3C2410_BANKCON_PMC4 (0x01) -#define S3C2410_BANKCON_PMC8 (0x02) -#define S3C2410_BANKCON_PMC16 (0x03) - -/* bank configurations for banks 0..7, note banks - * 6 and 7 have different configurations depending on - * the memory type bits */ - -#define S3C2410_BANKCON_Tacp2 (0x0 << 2) -#define S3C2410_BANKCON_Tacp3 (0x1 << 2) -#define S3C2410_BANKCON_Tacp4 (0x2 << 2) -#define S3C2410_BANKCON_Tacp6 (0x3 << 2) -#define S3C2410_BANKCON_Tacp_SHIFT (2) - -#define S3C2410_BANKCON_Tcah0 (0x0 << 4) -#define S3C2410_BANKCON_Tcah1 (0x1 << 4) -#define S3C2410_BANKCON_Tcah2 (0x2 << 4) -#define S3C2410_BANKCON_Tcah4 (0x3 << 4) -#define S3C2410_BANKCON_Tcah_SHIFT (4) - -#define S3C2410_BANKCON_Tcoh0 (0x0 << 6) -#define S3C2410_BANKCON_Tcoh1 (0x1 << 6) -#define S3C2410_BANKCON_Tcoh2 (0x2 << 6) -#define S3C2410_BANKCON_Tcoh4 (0x3 << 6) -#define S3C2410_BANKCON_Tcoh_SHIFT (6) - -#define S3C2410_BANKCON_Tacc1 (0x0 << 8) -#define S3C2410_BANKCON_Tacc2 (0x1 << 8) -#define S3C2410_BANKCON_Tacc3 (0x2 << 8) -#define S3C2410_BANKCON_Tacc4 (0x3 << 8) -#define S3C2410_BANKCON_Tacc6 (0x4 << 8) -#define S3C2410_BANKCON_Tacc8 (0x5 << 8) -#define S3C2410_BANKCON_Tacc10 (0x6 << 8) -#define S3C2410_BANKCON_Tacc14 (0x7 << 8) -#define S3C2410_BANKCON_Tacc_SHIFT (8) - -#define S3C2410_BANKCON_Tcos0 (0x0 << 11) -#define S3C2410_BANKCON_Tcos1 (0x1 << 11) -#define S3C2410_BANKCON_Tcos2 (0x2 << 11) -#define S3C2410_BANKCON_Tcos4 (0x3 << 11) -#define S3C2410_BANKCON_Tcos_SHIFT (11) - -#define S3C2410_BANKCON_Tacs0 (0x0 << 13) -#define S3C2410_BANKCON_Tacs1 (0x1 << 13) -#define S3C2410_BANKCON_Tacs2 (0x2 << 13) -#define S3C2410_BANKCON_Tacs4 (0x3 << 13) -#define S3C2410_BANKCON_Tacs_SHIFT (13) - -#define S3C2410_BANKCON_SRAM (0x0 << 15) -#define S3C2410_BANKCON_SDRAM (0x3 << 15) - -/* next bits only for SDRAM in 6,7 */ -#define S3C2410_BANKCON_Trcd2 (0x00 << 2) -#define S3C2410_BANKCON_Trcd3 (0x01 << 2) -#define S3C2410_BANKCON_Trcd4 (0x02 << 2) - -/* control column address select */ -#define S3C2410_BANKCON_SCANb8 (0x00 << 0) -#define S3C2410_BANKCON_SCANb9 (0x01 << 0) -#define S3C2410_BANKCON_SCANb10 (0x02 << 0) - -#define S3C2410_REFRESH S3C2410_MEMREG(0x0024) -#define S3C2410_BANKSIZE S3C2410_MEMREG(0x0028) -#define S3C2410_MRSRB6 S3C2410_MEMREG(0x002C) -#define S3C2410_MRSRB7 S3C2410_MEMREG(0x0030) - -/* refresh control */ - -#define S3C2410_REFRESH_REFEN (1<<23) -#define S3C2410_REFRESH_SELF (1<<22) -#define S3C2410_REFRESH_REFCOUNTER ((1<<11)-1) - -#define S3C2410_REFRESH_TRP_MASK (3<<20) -#define S3C2410_REFRESH_TRP_2clk (0<<20) -#define S3C2410_REFRESH_TRP_3clk (1<<20) -#define S3C2410_REFRESH_TRP_4clk (2<<20) - -#define S3C2410_REFRESH_TSRC_MASK (3<<18) -#define S3C2410_REFRESH_TSRC_4clk (0<<18) -#define S3C2410_REFRESH_TSRC_5clk (1<<18) -#define S3C2410_REFRESH_TSRC_6clk (2<<18) -#define S3C2410_REFRESH_TSRC_7clk (3<<18) - - -/* mode select register(s) */ - -#define S3C2410_MRSRB_CL1 (0x00 << 4) -#define S3C2410_MRSRB_CL2 (0x02 << 4) -#define S3C2410_MRSRB_CL3 (0x03 << 4) - -/* bank size register */ -#define S3C2410_BANKSIZE_128M (0x2 << 0) -#define S3C2410_BANKSIZE_64M (0x1 << 0) -#define S3C2410_BANKSIZE_32M (0x0 << 0) -#define S3C2410_BANKSIZE_16M (0x7 << 0) -#define S3C2410_BANKSIZE_8M (0x6 << 0) -#define S3C2410_BANKSIZE_4M (0x5 << 0) -#define S3C2410_BANKSIZE_2M (0x4 << 0) -#define S3C2410_BANKSIZE_MASK (0x7 << 0) -#define S3C2410_BANKSIZE_SCLK_EN (1<<4) -#define S3C2410_BANKSIZE_SCKE_EN (1<<5) -#define S3C2410_BANKSIZE_BURST (1<<7) - -#endif /* __ASM_ARM_MEMREGS_H */ diff --git a/arch/arm/mach-s3c2410/include/mach/regs-power.h b/arch/arm/mach-s3c2410/include/mach/regs-power.h deleted file mode 100644 index 4932b87bdf3d..000000000000 --- a/arch/arm/mach-s3c2410/include/mach/regs-power.h +++ /dev/null @@ -1,40 +0,0 @@ -/* arch/arm/mach-s3c2410/include/mach/regs-power.h - * - * Copyright (c) 2003-2006 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * S3C24XX power control register definitions -*/ - -#ifndef __ASM_ARM_REGS_PWR -#define __ASM_ARM_REGS_PWR __FILE__ - -#define S3C24XX_PWRREG(x) ((x) + S3C24XX_VA_CLKPWR) - -#define S3C2412_PWRMODECON S3C24XX_PWRREG(0x20) -#define S3C2412_PWRCFG S3C24XX_PWRREG(0x24) - -#define S3C2412_INFORM0 S3C24XX_PWRREG(0x70) -#define S3C2412_INFORM1 S3C24XX_PWRREG(0x74) -#define S3C2412_INFORM2 S3C24XX_PWRREG(0x78) -#define S3C2412_INFORM3 S3C24XX_PWRREG(0x7C) - -#define S3C2412_PWRCFG_BATF_IRQ (1<<0) -#define S3C2412_PWRCFG_BATF_IGNORE (2<<0) -#define S3C2412_PWRCFG_BATF_SLEEP (3<<0) -#define S3C2412_PWRCFG_BATF_MASK (3<<0) - -#define S3C2412_PWRCFG_STANDBYWFI_IGNORE (0<<6) -#define S3C2412_PWRCFG_STANDBYWFI_IDLE (1<<6) -#define S3C2412_PWRCFG_STANDBYWFI_STOP (2<<6) -#define S3C2412_PWRCFG_STANDBYWFI_SLEEP (3<<6) -#define S3C2412_PWRCFG_STANDBYWFI_MASK (3<<6) - -#define S3C2412_PWRCFG_RTC_MASKIRQ (1<<8) -#define S3C2412_PWRCFG_NAND_NORST (1<<9) - -#endif /* __ASM_ARM_REGS_PWR */ diff --git a/arch/arm/mach-s3c2410/include/mach/regs-s3c2412-mem.h b/arch/arm/mach-s3c2410/include/mach/regs-s3c2412-mem.h deleted file mode 100644 index fb6352515090..000000000000 --- a/arch/arm/mach-s3c2410/include/mach/regs-s3c2412-mem.h +++ /dev/null @@ -1,48 +0,0 @@ -/* arch/arm/mach-s3c2410/include/mach/regs-s3c2412-mem.h - * - * Copyright (c) 2008 Simtec Electronics - * Ben Dooks - * http://armlinux.simtec.co.uk/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * S3C2412 memory register definitions -*/ - -#ifndef __ASM_ARM_REGS_S3C2412_MEM -#define __ASM_ARM_REGS_S3C2412_MEM - -#define S3C2412_MEMREG(x) (S3C24XX_VA_MEMCTRL + (x)) -#define S3C2412_EBIREG(x) (S3C2412_VA_EBI + (x)) - -#define S3C2412_SSMCREG(x) (S3C2412_VA_SSMC + (x)) -#define S3C2412_SSMC(x, o) (S3C2412_SSMCREG((x * 0x20) + (o))) - -#define S3C2412_BANKCFG S3C2412_MEMREG(0x00) -#define S3C2412_BANKCON1 S3C2412_MEMREG(0x04) -#define S3C2412_BANKCON2 S3C2412_MEMREG(0x08) -#define S3C2412_BANKCON3 S3C2412_MEMREG(0x0C) - -#define S3C2412_REFRESH S3C2412_MEMREG(0x10) -#define S3C2412_TIMEOUT S3C2412_MEMREG(0x14) - -/* EBI control registers */ - -#define S3C2412_EBI_PR S3C2412_EBIREG(0x00) -#define S3C2412_EBI_BANKCFG S3C2412_EBIREG(0x04) - -/* SSMC control registers */ - -#define S3C2412_SSMC_BANK(x) S3C2412_SSMC(x, 0x00) -#define S3C2412_SMIDCYR(x) S3C2412_SSMC(x, 0x00) -#define S3C2412_SMBWSTRD(x) S3C2412_SSMC(x, 0x04) -#define S3C2412_SMBWSTWRR(x) S3C2412_SSMC(x, 0x08) -#define S3C2412_SMBWSTOENR(x) S3C2412_SSMC(x, 0x0C) -#define S3C2412_SMBWSTWENR(x) S3C2412_SSMC(x, 0x10) -#define S3C2412_SMBCR(x) S3C2412_SSMC(x, 0x14) -#define S3C2412_SMBSR(x) S3C2412_SSMC(x, 0x18) -#define S3C2412_SMBWSTBRDR(x) S3C2412_SSMC(x, 0x1C) - -#endif /* __ASM_ARM_REGS_S3C2412_MEM */ diff --git a/arch/arm/mach-s3c2410/include/mach/regs-s3c2412.h b/arch/arm/mach-s3c2410/include/mach/regs-s3c2412.h deleted file mode 100644 index aa69dc79bc38..000000000000 --- a/arch/arm/mach-s3c2410/include/mach/regs-s3c2412.h +++ /dev/null @@ -1,23 +0,0 @@ -/* arch/arm/mach-s3c2410/include/mach/regs-s3c2412.h - * - * Copyright 2007 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * S3C2412 specific register definitions -*/ - -#ifndef __ASM_ARCH_REGS_S3C2412_H -#define __ASM_ARCH_REGS_S3C2412_H "s3c2412" - -#define S3C2412_SWRST (S3C24XX_VA_CLKPWR + 0x30) -#define S3C2412_SWRST_RESET (0x533C2412) - -/* see regs-power.h for the other registers in the power block. */ - -#endif /* __ASM_ARCH_REGS_S3C2412_H */ - diff --git a/arch/arm/mach-s3c2410/include/mach/regs-s3c2416-mem.h b/arch/arm/mach-s3c2410/include/mach/regs-s3c2416-mem.h deleted file mode 100644 index 2f31b74974af..000000000000 --- a/arch/arm/mach-s3c2410/include/mach/regs-s3c2416-mem.h +++ /dev/null @@ -1,30 +0,0 @@ -/* arch/arm/mach-s3c2410/include/mach/regs-s3c2416-mem.h - * - * Copyright (c) 2009 Yauhen Kharuzhy , - * as part of OpenInkpot project - * Copyright (c) 2009 Promwad Innovation Company - * Yauhen Kharuzhy - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * S3C2416 memory register definitions -*/ - -#ifndef __ASM_ARM_REGS_S3C2416_MEM -#define __ASM_ARM_REGS_S3C2416_MEM - -#ifndef S3C2416_MEMREG -#define S3C2416_MEMREG(x) (S3C24XX_VA_MEMCTRL + (x)) -#endif - -#define S3C2416_BANKCFG S3C2416_MEMREG(0x00) -#define S3C2416_BANKCON1 S3C2416_MEMREG(0x04) -#define S3C2416_BANKCON2 S3C2416_MEMREG(0x08) -#define S3C2416_BANKCON3 S3C2416_MEMREG(0x0C) - -#define S3C2416_REFRESH S3C2416_MEMREG(0x10) -#define S3C2416_TIMEOUT S3C2416_MEMREG(0x14) - -#endif /* __ASM_ARM_REGS_S3C2416_MEM */ diff --git a/arch/arm/mach-s3c2410/include/mach/regs-s3c2416.h b/arch/arm/mach-s3c2410/include/mach/regs-s3c2416.h deleted file mode 100644 index e443167efb87..000000000000 --- a/arch/arm/mach-s3c2410/include/mach/regs-s3c2416.h +++ /dev/null @@ -1,24 +0,0 @@ -/* arch/arm/mach-s3c2410/include/mach/regs-s3c2416.h - * - * Copyright (c) 2009 Yauhen Kharuzhy , - * as part of OpenInkpot project - * Copyright (c) 2009 Promwad Innovation Company - * Yauhen Kharuzhy - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * S3C2416 specific register definitions -*/ - -#ifndef __ASM_ARCH_REGS_S3C2416_H -#define __ASM_ARCH_REGS_S3C2416_H "s3c2416" - -#define S3C2416_SWRST (S3C24XX_VA_CLKPWR + 0x44) -#define S3C2416_SWRST_RESET (0x533C2416) - -/* see regs-power.h for the other registers in the power block. */ - -#endif /* __ASM_ARCH_REGS_S3C2416_H */ - diff --git a/arch/arm/mach-s3c2410/include/mach/regs-s3c2443-clock.h b/arch/arm/mach-s3c2410/include/mach/regs-s3c2443-clock.h deleted file mode 100644 index c3feff3c0488..000000000000 --- a/arch/arm/mach-s3c2410/include/mach/regs-s3c2443-clock.h +++ /dev/null @@ -1,194 +0,0 @@ -/* arch/arm/mach-s3c2410/include/mach/regs-s3c2443-clock.h - * - * Copyright (c) 2007 Simtec Electronics - * Ben Dooks - * http://armlinux.simtec.co.uk/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * S3C2443 clock register definitions -*/ - -#ifndef __ASM_ARM_REGS_S3C2443_CLOCK -#define __ASM_ARM_REGS_S3C2443_CLOCK - -#define S3C2443_CLKREG(x) ((x) + S3C24XX_VA_CLKPWR) - -#define S3C2443_PLLCON_MDIVSHIFT 16 -#define S3C2443_PLLCON_PDIVSHIFT 8 -#define S3C2443_PLLCON_SDIVSHIFT 0 -#define S3C2443_PLLCON_MDIVMASK ((1<<(1+(23-16)))-1) -#define S3C2443_PLLCON_PDIVMASK ((1<<(1+(9-8)))-1) -#define S3C2443_PLLCON_SDIVMASK (3) - -#define S3C2443_MPLLCON S3C2443_CLKREG(0x10) -#define S3C2443_EPLLCON S3C2443_CLKREG(0x18) -#define S3C2443_CLKSRC S3C2443_CLKREG(0x20) -#define S3C2443_CLKDIV0 S3C2443_CLKREG(0x24) -#define S3C2443_CLKDIV1 S3C2443_CLKREG(0x28) -#define S3C2443_HCLKCON S3C2443_CLKREG(0x30) -#define S3C2443_PCLKCON S3C2443_CLKREG(0x34) -#define S3C2443_SCLKCON S3C2443_CLKREG(0x38) -#define S3C2443_PWRMODE S3C2443_CLKREG(0x40) -#define S3C2443_SWRST S3C2443_CLKREG(0x44) -#define S3C2443_BUSPRI0 S3C2443_CLKREG(0x50) -#define S3C2443_SYSID S3C2443_CLKREG(0x5C) -#define S3C2443_PWRCFG S3C2443_CLKREG(0x60) -#define S3C2443_RSTCON S3C2443_CLKREG(0x64) -#define S3C2443_PHYCTRL S3C2443_CLKREG(0x80) -#define S3C2443_PHYPWR S3C2443_CLKREG(0x84) -#define S3C2443_URSTCON S3C2443_CLKREG(0x88) -#define S3C2443_UCLKCON S3C2443_CLKREG(0x8C) - -#define S3C2443_SWRST_RESET (0x533c2443) - -#define S3C2443_PLLCON_OFF (1<<24) - -#define S3C2443_CLKSRC_EPLLREF_XTAL (2<<7) -#define S3C2443_CLKSRC_EPLLREF_EXTCLK (3<<7) -#define S3C2443_CLKSRC_EPLLREF_MPLLREF (0<<7) -#define S3C2443_CLKSRC_EPLLREF_MPLLREF2 (1<<7) -#define S3C2443_CLKSRC_EPLLREF_MASK (3<<7) - -#define S3C2443_CLKSRC_EXTCLK_DIV (1<<3) - -#define S3C2443_CLKDIV0_HALF_HCLK (1<<3) -#define S3C2443_CLKDIV0_HALF_PCLK (1<<2) - -#define S3C2443_CLKDIV0_HCLKDIV_MASK (3<<0) - -#define S3C2443_CLKDIV0_EXTDIV_MASK (3<<6) -#define S3C2443_CLKDIV0_EXTDIV_SHIFT (6) - -#define S3C2443_CLKDIV0_PREDIV_MASK (3<<4) -#define S3C2443_CLKDIV0_PREDIV_SHIFT (4) - -#define S3C2416_CLKDIV0_ARMDIV_MASK (7 << 9) -#define S3C2443_CLKDIV0_ARMDIV_MASK (15<<9) -#define S3C2443_CLKDIV0_ARMDIV_SHIFT (9) -#define S3C2443_CLKDIV0_ARMDIV_1 (0<<9) -#define S3C2443_CLKDIV0_ARMDIV_2 (8<<9) -#define S3C2443_CLKDIV0_ARMDIV_3 (2<<9) -#define S3C2443_CLKDIV0_ARMDIV_4 (9<<9) -#define S3C2443_CLKDIV0_ARMDIV_6 (10<<9) -#define S3C2443_CLKDIV0_ARMDIV_8 (11<<9) -#define S3C2443_CLKDIV0_ARMDIV_12 (13<<9) -#define S3C2443_CLKDIV0_ARMDIV_16 (15<<9) - -/* S3C2443_CLKDIV1 removed, only used in clock.c code */ - -#define S3C2443_CLKCON_NAND - -#define S3C2443_HCLKCON_DMA0 (1<<0) -#define S3C2443_HCLKCON_DMA1 (1<<1) -#define S3C2443_HCLKCON_DMA2 (1<<2) -#define S3C2443_HCLKCON_DMA3 (1<<3) -#define S3C2443_HCLKCON_DMA4 (1<<4) -#define S3C2443_HCLKCON_DMA5 (1<<5) -#define S3C2443_HCLKCON_CAMIF (1<<8) -#define S3C2443_HCLKCON_LCDC (1<<9) -#define S3C2443_HCLKCON_USBH (1<<11) -#define S3C2443_HCLKCON_USBD (1<<12) -#define S3C2416_HCLKCON_HSMMC0 (1<<15) -#define S3C2443_HCLKCON_HSMMC (1<<16) -#define S3C2443_HCLKCON_CFC (1<<17) -#define S3C2443_HCLKCON_SSMC (1<<18) -#define S3C2443_HCLKCON_DRAMC (1<<19) - -#define S3C2443_PCLKCON_UART0 (1<<0) -#define S3C2443_PCLKCON_UART1 (1<<1) -#define S3C2443_PCLKCON_UART2 (1<<2) -#define S3C2443_PCLKCON_UART3 (1<<3) -#define S3C2443_PCLKCON_IIC (1<<4) -#define S3C2443_PCLKCON_SDI (1<<5) -#define S3C2443_PCLKCON_HSSPI (1<<6) -#define S3C2443_PCLKCON_ADC (1<<7) -#define S3C2443_PCLKCON_AC97 (1<<8) -#define S3C2443_PCLKCON_IIS (1<<9) -#define S3C2443_PCLKCON_PWMT (1<<10) -#define S3C2443_PCLKCON_WDT (1<<11) -#define S3C2443_PCLKCON_RTC (1<<12) -#define S3C2443_PCLKCON_GPIO (1<<13) -#define S3C2443_PCLKCON_SPI0 (1<<14) -#define S3C2443_PCLKCON_SPI1 (1<<15) - -#define S3C2443_SCLKCON_DDRCLK (1<<16) -#define S3C2443_SCLKCON_SSMCCLK (1<<15) -#define S3C2443_SCLKCON_HSSPICLK (1<<14) -#define S3C2443_SCLKCON_HSMMCCLK_EXT (1<<13) -#define S3C2443_SCLKCON_HSMMCCLK_EPLL (1<<12) -#define S3C2443_SCLKCON_CAMCLK (1<<11) -#define S3C2443_SCLKCON_DISPCLK (1<<10) -#define S3C2443_SCLKCON_I2SCLK (1<<9) -#define S3C2443_SCLKCON_UARTCLK (1<<8) -#define S3C2443_SCLKCON_USBHOST (1<<1) - -#define S3C2443_PWRCFG_SLEEP (1<<15) - -#define S3C2443_PWRCFG_USBPHY (1 << 4) - -#define S3C2443_URSTCON_FUNCRST (1 << 2) -#define S3C2443_URSTCON_PHYRST (1 << 0) - -#define S3C2443_PHYCTRL_CLKSEL (1 << 3) -#define S3C2443_PHYCTRL_EXTCLK (1 << 2) -#define S3C2443_PHYCTRL_PLLSEL (1 << 1) -#define S3C2443_PHYCTRL_DSPORT (1 << 0) - -#define S3C2443_PHYPWR_COMMON_ON (1 << 31) -#define S3C2443_PHYPWR_ANALOG_PD (1 << 4) -#define S3C2443_PHYPWR_PLL_REFCLK (1 << 3) -#define S3C2443_PHYPWR_XO_ON (1 << 2) -#define S3C2443_PHYPWR_PLL_PWRDN (1 << 1) -#define S3C2443_PHYPWR_FSUSPEND (1 << 0) - -#define S3C2443_UCLKCON_DETECT_VBUS (1 << 31) -#define S3C2443_UCLKCON_FUNC_CLKEN (1 << 2) -#define S3C2443_UCLKCON_TCLKEN (1 << 0) - -#include - -static inline unsigned int -s3c2443_get_mpll(unsigned int pllval, unsigned int baseclk) -{ - unsigned int mdiv, pdiv, sdiv; - uint64_t fvco; - - mdiv = pllval >> S3C2443_PLLCON_MDIVSHIFT; - pdiv = pllval >> S3C2443_PLLCON_PDIVSHIFT; - sdiv = pllval >> S3C2443_PLLCON_SDIVSHIFT; - - mdiv &= S3C2443_PLLCON_MDIVMASK; - pdiv &= S3C2443_PLLCON_PDIVMASK; - sdiv &= S3C2443_PLLCON_SDIVMASK; - - fvco = (uint64_t)baseclk * (2 * (mdiv + 8)); - do_div(fvco, pdiv << sdiv); - - return (unsigned int)fvco; -} - -static inline unsigned int -s3c2443_get_epll(unsigned int pllval, unsigned int baseclk) -{ - unsigned int mdiv, pdiv, sdiv; - uint64_t fvco; - - mdiv = pllval >> S3C2443_PLLCON_MDIVSHIFT; - pdiv = pllval >> S3C2443_PLLCON_PDIVSHIFT; - sdiv = pllval >> S3C2443_PLLCON_SDIVSHIFT; - - mdiv &= S3C2443_PLLCON_MDIVMASK; - pdiv &= S3C2443_PLLCON_PDIVMASK; - sdiv &= S3C2443_PLLCON_SDIVMASK; - - fvco = (uint64_t)baseclk * (mdiv + 8); - do_div(fvco, (pdiv + 2) << sdiv); - - return (unsigned int)fvco; -} - -#endif /* __ASM_ARM_REGS_S3C2443_CLOCK */ - diff --git a/arch/arm/mach-s3c2410/include/mach/regs-sdi.h b/arch/arm/mach-s3c2410/include/mach/regs-sdi.h deleted file mode 100644 index cbf2d8884e30..000000000000 --- a/arch/arm/mach-s3c2410/include/mach/regs-sdi.h +++ /dev/null @@ -1,127 +0,0 @@ -/* arch/arm/mach-s3c2410/include/mach/regs-sdi.h - * - * Copyright (c) 2004 Simtec Electronics - * http://www.simtec.co.uk/products/SWLINUX/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * S3C2410 MMC/SDIO register definitions -*/ - -#ifndef __ASM_ARM_REGS_SDI -#define __ASM_ARM_REGS_SDI "regs-sdi.h" - -#define S3C2410_SDICON (0x00) -#define S3C2410_SDIPRE (0x04) -#define S3C2410_SDICMDARG (0x08) -#define S3C2410_SDICMDCON (0x0C) -#define S3C2410_SDICMDSTAT (0x10) -#define S3C2410_SDIRSP0 (0x14) -#define S3C2410_SDIRSP1 (0x18) -#define S3C2410_SDIRSP2 (0x1C) -#define S3C2410_SDIRSP3 (0x20) -#define S3C2410_SDITIMER (0x24) -#define S3C2410_SDIBSIZE (0x28) -#define S3C2410_SDIDCON (0x2C) -#define S3C2410_SDIDCNT (0x30) -#define S3C2410_SDIDSTA (0x34) -#define S3C2410_SDIFSTA (0x38) - -#define S3C2410_SDIDATA (0x3C) -#define S3C2410_SDIIMSK (0x40) - -#define S3C2440_SDIDATA (0x40) -#define S3C2440_SDIIMSK (0x3C) - -#define S3C2440_SDICON_SDRESET (1<<8) -#define S3C2440_SDICON_MMCCLOCK (1<<5) -#define S3C2410_SDICON_BYTEORDER (1<<4) -#define S3C2410_SDICON_SDIOIRQ (1<<3) -#define S3C2410_SDICON_RWAITEN (1<<2) -#define S3C2410_SDICON_FIFORESET (1<<1) -#define S3C2410_SDICON_CLOCKTYPE (1<<0) - -#define S3C2410_SDICMDCON_ABORT (1<<12) -#define S3C2410_SDICMDCON_WITHDATA (1<<11) -#define S3C2410_SDICMDCON_LONGRSP (1<<10) -#define S3C2410_SDICMDCON_WAITRSP (1<<9) -#define S3C2410_SDICMDCON_CMDSTART (1<<8) -#define S3C2410_SDICMDCON_SENDERHOST (1<<6) -#define S3C2410_SDICMDCON_INDEX (0x3f) - -#define S3C2410_SDICMDSTAT_CRCFAIL (1<<12) -#define S3C2410_SDICMDSTAT_CMDSENT (1<<11) -#define S3C2410_SDICMDSTAT_CMDTIMEOUT (1<<10) -#define S3C2410_SDICMDSTAT_RSPFIN (1<<9) -#define S3C2410_SDICMDSTAT_XFERING (1<<8) -#define S3C2410_SDICMDSTAT_INDEX (0xff) - -#define S3C2440_SDIDCON_DS_BYTE (0<<22) -#define S3C2440_SDIDCON_DS_HALFWORD (1<<22) -#define S3C2440_SDIDCON_DS_WORD (2<<22) -#define S3C2410_SDIDCON_IRQPERIOD (1<<21) -#define S3C2410_SDIDCON_TXAFTERRESP (1<<20) -#define S3C2410_SDIDCON_RXAFTERCMD (1<<19) -#define S3C2410_SDIDCON_BUSYAFTERCMD (1<<18) -#define S3C2410_SDIDCON_BLOCKMODE (1<<17) -#define S3C2410_SDIDCON_WIDEBUS (1<<16) -#define S3C2410_SDIDCON_DMAEN (1<<15) -#define S3C2410_SDIDCON_STOP (1<<14) -#define S3C2440_SDIDCON_DATSTART (1<<14) -#define S3C2410_SDIDCON_DATMODE (3<<12) -#define S3C2410_SDIDCON_BLKNUM (0x7ff) - -/* constants for S3C2410_SDIDCON_DATMODE */ -#define S3C2410_SDIDCON_XFER_READY (0<<12) -#define S3C2410_SDIDCON_XFER_CHKSTART (1<<12) -#define S3C2410_SDIDCON_XFER_RXSTART (2<<12) -#define S3C2410_SDIDCON_XFER_TXSTART (3<<12) - -#define S3C2410_SDIDCON_BLKNUM_MASK (0xFFF) -#define S3C2410_SDIDCNT_BLKNUM_SHIFT (12) - -#define S3C2410_SDIDSTA_RDYWAITREQ (1<<10) -#define S3C2410_SDIDSTA_SDIOIRQDETECT (1<<9) -#define S3C2410_SDIDSTA_FIFOFAIL (1<<8) /* reserved on 2440 */ -#define S3C2410_SDIDSTA_CRCFAIL (1<<7) -#define S3C2410_SDIDSTA_RXCRCFAIL (1<<6) -#define S3C2410_SDIDSTA_DATATIMEOUT (1<<5) -#define S3C2410_SDIDSTA_XFERFINISH (1<<4) -#define S3C2410_SDIDSTA_BUSYFINISH (1<<3) -#define S3C2410_SDIDSTA_SBITERR (1<<2) /* reserved on 2410a/2440 */ -#define S3C2410_SDIDSTA_TXDATAON (1<<1) -#define S3C2410_SDIDSTA_RXDATAON (1<<0) - -#define S3C2440_SDIFSTA_FIFORESET (1<<16) -#define S3C2440_SDIFSTA_FIFOFAIL (3<<14) /* 3 is correct (2 bits) */ -#define S3C2410_SDIFSTA_TFDET (1<<13) -#define S3C2410_SDIFSTA_RFDET (1<<12) -#define S3C2410_SDIFSTA_TFHALF (1<<11) -#define S3C2410_SDIFSTA_TFEMPTY (1<<10) -#define S3C2410_SDIFSTA_RFLAST (1<<9) -#define S3C2410_SDIFSTA_RFFULL (1<<8) -#define S3C2410_SDIFSTA_RFHALF (1<<7) -#define S3C2410_SDIFSTA_COUNTMASK (0x7f) - -#define S3C2410_SDIIMSK_RESPONSECRC (1<<17) -#define S3C2410_SDIIMSK_CMDSENT (1<<16) -#define S3C2410_SDIIMSK_CMDTIMEOUT (1<<15) -#define S3C2410_SDIIMSK_RESPONSEND (1<<14) -#define S3C2410_SDIIMSK_READWAIT (1<<13) -#define S3C2410_SDIIMSK_SDIOIRQ (1<<12) -#define S3C2410_SDIIMSK_FIFOFAIL (1<<11) -#define S3C2410_SDIIMSK_CRCSTATUS (1<<10) -#define S3C2410_SDIIMSK_DATACRC (1<<9) -#define S3C2410_SDIIMSK_DATATIMEOUT (1<<8) -#define S3C2410_SDIIMSK_DATAFINISH (1<<7) -#define S3C2410_SDIIMSK_BUSYFINISH (1<<6) -#define S3C2410_SDIIMSK_SBITERR (1<<5) /* reserved 2440/2410a */ -#define S3C2410_SDIIMSK_TXFIFOHALF (1<<4) -#define S3C2410_SDIIMSK_TXFIFOEMPTY (1<<3) -#define S3C2410_SDIIMSK_RXFIFOLAST (1<<2) -#define S3C2410_SDIIMSK_RXFIFOFULL (1<<1) -#define S3C2410_SDIIMSK_RXFIFOHALF (1<<0) - -#endif /* __ASM_ARM_REGS_SDI */ diff --git a/arch/arm/mach-s3c2410/include/mach/system.h b/arch/arm/mach-s3c2410/include/mach/system.h deleted file mode 100644 index 5e215c1a5c8f..000000000000 --- a/arch/arm/mach-s3c2410/include/mach/system.h +++ /dev/null @@ -1,54 +0,0 @@ -/* arch/arm/mach-s3c2410/include/mach/system.h - * - * Copyright (c) 2003 Simtec Electronics - * Ben Dooks - * - * S3C2410 - System function defines and includes - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include -#include - -#include -#include - -#include - -void (*s3c24xx_idle)(void); - -void s3c24xx_default_idle(void) -{ - unsigned long tmp; - int i; - - /* idle the system by using the idle mode which will wait for an - * interrupt to happen before restarting the system. - */ - - /* Warning: going into idle state upsets jtag scanning */ - - __raw_writel(__raw_readl(S3C2410_CLKCON) | S3C2410_CLKCON_IDLE, - S3C2410_CLKCON); - - /* the samsung port seems to do a loop and then unset idle.. */ - for (i = 0; i < 50; i++) { - tmp += __raw_readl(S3C2410_CLKCON); /* ensure loop not optimised out */ - } - - /* this bit is not cleared on re-start... */ - - __raw_writel(__raw_readl(S3C2410_CLKCON) & ~S3C2410_CLKCON_IDLE, - S3C2410_CLKCON); -} - -static void arch_idle(void) -{ - if (s3c24xx_idle != NULL) - (s3c24xx_idle)(); - else - s3c24xx_default_idle(); -} diff --git a/arch/arm/mach-s3c2410/include/mach/tick.h b/arch/arm/mach-s3c2410/include/mach/tick.h deleted file mode 100644 index 544da41979db..000000000000 --- a/arch/arm/mach-s3c2410/include/mach/tick.h +++ /dev/null @@ -1,15 +0,0 @@ -/* linux/arch/arm/mach-s3c2410/include/mach/tick.h - * - * Copyright 2008 Simtec Electronics - * Ben Dooks - * http://armlinux.simtec.co.uk/ - * - * S3C2410 - timer tick support - */ - -#define SRCPND_TIMER4 (1<<(IRQ_TIMER4 - IRQ_EINT0)) - -static inline int s3c24xx_ostimer_pending(void) -{ - return __raw_readl(S3C2410_SRCPND) & SRCPND_TIMER4; -} diff --git a/arch/arm/mach-s3c2410/include/mach/timex.h b/arch/arm/mach-s3c2410/include/mach/timex.h deleted file mode 100644 index fe9ca1ffd51b..000000000000 --- a/arch/arm/mach-s3c2410/include/mach/timex.h +++ /dev/null @@ -1,24 +0,0 @@ -/* arch/arm/mach-s3c2410/include/mach/timex.h - * - * Copyright (c) 2003-2005 Simtec Electronics - * Ben Dooks - * - * S3C2410 - time parameters - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_TIMEX_H -#define __ASM_ARCH_TIMEX_H - -/* CLOCK_TICK_RATE needs to be evaluatable by the cpp, so making it - * a variable is useless. It seems as long as we make our timers an - * exact multiple of HZ, any value that makes a 1->1 correspondence - * for the time conversion functions to/from jiffies is acceptable. -*/ - -#define CLOCK_TICK_RATE 12000000 - -#endif /* __ASM_ARCH_TIMEX_H */ diff --git a/arch/arm/mach-s3c2410/include/mach/uncompress.h b/arch/arm/mach-s3c2410/include/mach/uncompress.h deleted file mode 100644 index 8b283f847daa..000000000000 --- a/arch/arm/mach-s3c2410/include/mach/uncompress.h +++ /dev/null @@ -1,54 +0,0 @@ -/* arch/arm/mach-s3c2410/include/mach/uncompress.h - * - * Copyright (c) 2003-2007 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks - * - * S3C2410 - uncompress code - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_UNCOMPRESS_H -#define __ASM_ARCH_UNCOMPRESS_H - -#include -#include - -/* working in physical space... */ -#undef S3C2410_GPIOREG -#define S3C2410_GPIOREG(x) ((S3C24XX_PA_GPIO + (x))) - -#include - -static inline int is_arm926(void) -{ - unsigned int cpuid; - - asm volatile ("mrc p15, 0, %0, c1, c0, 0" : "=r" (cpuid)); - - return ((cpuid & 0xff0) == 0x260); -} - -static void arch_detect_cpu(void) -{ - unsigned int cpuid; - - cpuid = *((volatile unsigned int *)S3C2410_GSTATUS1); - cpuid &= S3C2410_GSTATUS1_IDMASK; - - if (is_arm926() || cpuid == S3C2410_GSTATUS1_2440 || - cpuid == S3C2410_GSTATUS1_2442 || - cpuid == S3C2410_GSTATUS1_2416 || - cpuid == S3C2410_GSTATUS1_2450) { - fifo_mask = S3C2440_UFSTAT_TXMASK; - fifo_max = 63 << S3C2440_UFSTAT_TXSHIFT; - } else { - fifo_mask = S3C2410_UFSTAT_TXMASK; - fifo_max = 15 << S3C2410_UFSTAT_TXSHIFT; - } -} - -#endif /* __ASM_ARCH_UNCOMPRESS_H */ diff --git a/arch/arm/mach-s3c2410/include/mach/vr1000-cpld.h b/arch/arm/mach-s3c2410/include/mach/vr1000-cpld.h deleted file mode 100644 index e4119913d7c5..000000000000 --- a/arch/arm/mach-s3c2410/include/mach/vr1000-cpld.h +++ /dev/null @@ -1,18 +0,0 @@ -/* arch/arm/mach-s3c2410/include/mach/vr1000-cpld.h - * - * Copyright (c) 2003 Simtec Electronics - * Ben Dooks - * - * VR1000 - CPLD control constants - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_VR1000CPLD_H -#define __ASM_ARCH_VR1000CPLD_H - -#define VR1000_CPLD_CTRL2_RAMWEN (0x04) /* SRAM Write Enable */ - -#endif /* __ASM_ARCH_VR1000CPLD_H */ diff --git a/arch/arm/mach-s3c2410/include/mach/vr1000-irq.h b/arch/arm/mach-s3c2410/include/mach/vr1000-irq.h deleted file mode 100644 index 47add133b8ee..000000000000 --- a/arch/arm/mach-s3c2410/include/mach/vr1000-irq.h +++ /dev/null @@ -1,26 +0,0 @@ -/* arch/arm/mach-s3c2410/include/mach/vr1000-irq.h - * - * Copyright (c) 2003-2004 Simtec Electronics - * Ben Dooks - * - * Machine VR1000 - IRQ Number definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_VR1000IRQ_H -#define __ASM_ARCH_VR1000IRQ_H - -/* irq numbers to onboard peripherals */ - -#define IRQ_USBOC IRQ_EINT19 -#define IRQ_IDE0 IRQ_EINT16 -#define IRQ_IDE1 IRQ_EINT17 -#define IRQ_VR1000_SERIAL IRQ_EINT12 -#define IRQ_VR1000_DM9000A IRQ_EINT10 -#define IRQ_VR1000_DM9000N IRQ_EINT9 -#define IRQ_SMALERT IRQ_EINT8 - -#endif /* __ASM_ARCH_VR1000IRQ_H */ diff --git a/arch/arm/mach-s3c2410/include/mach/vr1000-map.h b/arch/arm/mach-s3c2410/include/mach/vr1000-map.h deleted file mode 100644 index 99612fcc4eb2..000000000000 --- a/arch/arm/mach-s3c2410/include/mach/vr1000-map.h +++ /dev/null @@ -1,110 +0,0 @@ -/* arch/arm/mach-s3c2410/include/mach/vr1000-map.h - * - * Copyright (c) 2003-2005 Simtec Electronics - * Ben Dooks - * - * Machine VR1000 - Memory map definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -/* needs arch/map.h including with this */ - -/* ok, we've used up to 0x13000000, now we need to find space for the - * peripherals that live in the nGCS[x] areas, which are quite numerous - * in their space. We also have the board's CPLD to find register space - * for. - */ - -#ifndef __ASM_ARCH_VR1000MAP_H -#define __ASM_ARCH_VR1000MAP_H - -#include - -#define VR1000_IOADDR(x) BAST_IOADDR(x) - -/* we put the CPLD registers next, to get them out of the way */ - -#define VR1000_VA_CTRL1 VR1000_IOADDR(0x00000000) /* 0x01300000 */ -#define VR1000_PA_CTRL1 (S3C2410_CS5 | 0x7800000) - -#define VR1000_VA_CTRL2 VR1000_IOADDR(0x00100000) /* 0x01400000 */ -#define VR1000_PA_CTRL2 (S3C2410_CS1 | 0x6000000) - -#define VR1000_VA_CTRL3 VR1000_IOADDR(0x00200000) /* 0x01500000 */ -#define VR1000_PA_CTRL3 (S3C2410_CS1 | 0x6800000) - -#define VR1000_VA_CTRL4 VR1000_IOADDR(0x00300000) /* 0x01600000 */ -#define VR1000_PA_CTRL4 (S3C2410_CS1 | 0x7000000) - -/* next, we have the PC104 ISA interrupt registers */ - -#define VR1000_PA_PC104_IRQREQ (S3C2410_CS5 | 0x6000000) /* 0x01700000 */ -#define VR1000_VA_PC104_IRQREQ VR1000_IOADDR(0x00400000) - -#define VR1000_PA_PC104_IRQRAW (S3C2410_CS5 | 0x6800000) /* 0x01800000 */ -#define VR1000_VA_PC104_IRQRAW VR1000_IOADDR(0x00500000) - -#define VR1000_PA_PC104_IRQMASK (S3C2410_CS5 | 0x7000000) /* 0x01900000 */ -#define VR1000_VA_PC104_IRQMASK VR1000_IOADDR(0x00600000) - -/* 0xE0000000 contains the IO space that is split by speed and - * wether the access is for 8 or 16bit IO... this ensures that - * the correct access is made - * - * 0x10000000 of space, partitioned as so: - * - * 0x00000000 to 0x04000000 8bit, slow - * 0x04000000 to 0x08000000 16bit, slow - * 0x08000000 to 0x0C000000 16bit, net - * 0x0C000000 to 0x10000000 16bit, fast - * - * each of these spaces has the following in: - * - * 0x02000000 to 0x02100000 1MB IDE primary channel - * 0x02100000 to 0x02200000 1MB IDE primary channel aux - * 0x02200000 to 0x02400000 1MB IDE secondary channel - * 0x02300000 to 0x02400000 1MB IDE secondary channel aux - * 0x02500000 to 0x02600000 1MB Davicom DM9000 ethernet controllers - * 0x02600000 to 0x02700000 1MB - * - * the phyiscal layout of the zones are: - * nGCS2 - 8bit, slow - * nGCS3 - 16bit, slow - * nGCS4 - 16bit, net - * nGCS5 - 16bit, fast - */ - -#define VR1000_VA_MULTISPACE (0xE0000000) - -#define VR1000_VA_ISAIO (VR1000_VA_MULTISPACE + 0x00000000) -#define VR1000_VA_ISAMEM (VR1000_VA_MULTISPACE + 0x01000000) -#define VR1000_VA_IDEPRI (VR1000_VA_MULTISPACE + 0x02000000) -#define VR1000_VA_IDEPRIAUX (VR1000_VA_MULTISPACE + 0x02100000) -#define VR1000_VA_IDESEC (VR1000_VA_MULTISPACE + 0x02200000) -#define VR1000_VA_IDESECAUX (VR1000_VA_MULTISPACE + 0x02300000) -#define VR1000_VA_ASIXNET (VR1000_VA_MULTISPACE + 0x02400000) -#define VR1000_VA_DM9000 (VR1000_VA_MULTISPACE + 0x02500000) -#define VR1000_VA_SUPERIO (VR1000_VA_MULTISPACE + 0x02600000) - -/* physical offset addresses for the peripherals */ - -#define VR1000_PA_IDEPRI (0x02000000) -#define VR1000_PA_IDEPRIAUX (0x02800000) -#define VR1000_PA_IDESEC (0x03000000) -#define VR1000_PA_IDESECAUX (0x03800000) -#define VR1000_PA_DM9000 (0x05000000) - -#define VR1000_PA_SERIAL (0x11800000) -#define VR1000_VA_SERIAL (VR1000_IOADDR(0x00700000)) - -/* VR1000 ram is in CS1, with A26..A24 = 2_101 */ -#define VR1000_PA_SRAM (S3C2410_CS1 | 0x05000000) - -/* some configurations for the peripherals */ - -#define VR1000_DM9000_CS VR1000_VAM_CS4 - -#endif /* __ASM_ARCH_VR1000MAP_H */ diff --git a/arch/arm/mach-s3c2410/mach-amlm5900.c b/arch/arm/mach-s3c2410/mach-amlm5900.c deleted file mode 100644 index 4220cc60de3c..000000000000 --- a/arch/arm/mach-s3c2410/mach-amlm5900.c +++ /dev/null @@ -1,247 +0,0 @@ -/* linux/arch/arm/mach-s3c2410/mach-amlm5900.c - * - * linux/arch/arm/mach-s3c2410/mach-amlm5900.c - * - * Copyright (c) 2006 American Microsystems Limited - * David Anders - - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - * - * @History: - * derived from linux/arch/arm/mach-s3c2410/mach-bast.c, written by - * Ben Dooks - * - ***********************************************************************/ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include - -#include -#include -#include -#include - -#include -#include -#include - -#include -#include -#include -#include - -#include -#include -#include -#include - -#include "common.h" - -static struct resource amlm5900_nor_resource = { - .start = 0x00000000, - .end = 0x01000000 - 1, - .flags = IORESOURCE_MEM, -}; - - - -static struct mtd_partition amlm5900_mtd_partitions[] = { - { - .name = "System", - .size = 0x240000, - .offset = 0, - .mask_flags = MTD_WRITEABLE, /* force read-only */ - }, { - .name = "Kernel", - .size = 0x100000, - .offset = MTDPART_OFS_APPEND, - }, { - .name = "Ramdisk", - .size = 0x300000, - .offset = MTDPART_OFS_APPEND, - }, { - .name = "JFFS2", - .size = 0x9A0000, - .offset = MTDPART_OFS_APPEND, - }, { - .name = "Settings", - .size = MTDPART_SIZ_FULL, - .offset = MTDPART_OFS_APPEND, - } -}; - -static struct physmap_flash_data amlm5900_flash_data = { - .width = 2, - .parts = amlm5900_mtd_partitions, - .nr_parts = ARRAY_SIZE(amlm5900_mtd_partitions), -}; - -static struct platform_device amlm5900_device_nor = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &amlm5900_flash_data, - }, - .num_resources = 1, - .resource = &amlm5900_nor_resource, -}; - -static struct map_desc amlm5900_iodesc[] __initdata = { -}; - -#define UCON S3C2410_UCON_DEFAULT -#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB -#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE - -static struct s3c2410_uartcfg amlm5900_uartcfgs[] = { - [0] = { - .hwport = 0, - .flags = 0, - .ucon = UCON, - .ulcon = ULCON, - .ufcon = UFCON, - }, - [1] = { - .hwport = 1, - .flags = 0, - .ucon = UCON, - .ulcon = ULCON, - .ufcon = UFCON, - }, - [2] = { - .hwport = 2, - .flags = 0, - .ucon = UCON, - .ulcon = ULCON, - .ufcon = UFCON, - } -}; - - -static struct platform_device *amlm5900_devices[] __initdata = { -#ifdef CONFIG_FB_S3C2410 - &s3c_device_lcd, -#endif - &s3c_device_adc, - &s3c_device_wdt, - &s3c_device_i2c0, - &s3c_device_ohci, - &s3c_device_rtc, - &s3c_device_usbgadget, - &s3c_device_sdi, - &amlm5900_device_nor, -}; - -static void __init amlm5900_map_io(void) -{ - s3c24xx_init_io(amlm5900_iodesc, ARRAY_SIZE(amlm5900_iodesc)); - s3c24xx_init_clocks(0); - s3c24xx_init_uarts(amlm5900_uartcfgs, ARRAY_SIZE(amlm5900_uartcfgs)); -} - -#ifdef CONFIG_FB_S3C2410 -static struct s3c2410fb_display __initdata amlm5900_lcd_info = { - .width = 160, - .height = 160, - - .type = S3C2410_LCDCON1_STN4, - - .pixclock = 680000, /* HCLK = 100MHz */ - .xres = 160, - .yres = 160, - .bpp = 4, - .left_margin = 1 << (4 + 3), - .right_margin = 8 << 3, - .hsync_len = 48, - .upper_margin = 0, - .lower_margin = 0, - - .lcdcon5 = 0x00000001, -}; - -static struct s3c2410fb_mach_info __initdata amlm5900_fb_info = { - - .displays = &amlm5900_lcd_info, - .num_displays = 1, - .default_display = 0, - - .gpccon = 0xaaaaaaaa, - .gpccon_mask = 0xffffffff, - .gpcup = 0x0000ffff, - .gpcup_mask = 0xffffffff, - - .gpdcon = 0xaaaaaaaa, - .gpdcon_mask = 0xffffffff, - .gpdup = 0x0000ffff, - .gpdup_mask = 0xffffffff, -}; -#endif - -static irqreturn_t -amlm5900_wake_interrupt(int irq, void *ignored) -{ - return IRQ_HANDLED; -} - -static void amlm5900_init_pm(void) -{ - int ret = 0; - - ret = request_irq(IRQ_EINT9, &amlm5900_wake_interrupt, - IRQF_TRIGGER_RISING | IRQF_SHARED, - "amlm5900_wakeup", &amlm5900_wake_interrupt); - if (ret != 0) { - printk(KERN_ERR "AML-M5900: no wakeup irq, %d?\n", ret); - } else { - enable_irq_wake(IRQ_EINT9); - /* configure the suspend/resume status pin */ - s3c_gpio_cfgpin(S3C2410_GPF(2), S3C2410_GPIO_OUTPUT); - s3c_gpio_setpull(S3C2410_GPF(2), S3C_GPIO_PULL_UP); - } -} -static void __init amlm5900_init(void) -{ - amlm5900_init_pm(); -#ifdef CONFIG_FB_S3C2410 - s3c24xx_fb_set_platdata(&amlm5900_fb_info); -#endif - s3c_i2c0_set_platdata(NULL); - platform_add_devices(amlm5900_devices, ARRAY_SIZE(amlm5900_devices)); -} - -MACHINE_START(AML_M5900, "AML_M5900") - .atag_offset = 0x100, - .map_io = amlm5900_map_io, - .init_irq = s3c24xx_init_irq, - .init_machine = amlm5900_init, - .timer = &s3c24xx_timer, - .restart = s3c2410_restart, -MACHINE_END diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c deleted file mode 100644 index feeaf73933dc..000000000000 --- a/arch/arm/mach-s3c2410/mach-bast.c +++ /dev/null @@ -1,645 +0,0 @@ -/* linux/arch/arm/mach-s3c2410/mach-bast.c - * - * Copyright 2003-2008 Simtec Electronics - * Ben Dooks - * - * http://www.simtec.co.uk/products/EB2410ITX/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include - -#include -#include -#include - -#include -#include -#include - -#include -#include -#include - -//#include -#include -#include -#include -#include - -#include -#include -#include -#include - -#include -#include -#include -#include - -#include - -#include -#include -#include -#include -#include -#include - -#include "usb-simtec.h" -#include "nor-simtec.h" -#include "common.h" - -#define COPYRIGHT ", Copyright 2004-2008 Simtec Electronics" - -/* macros for virtual address mods for the io space entries */ -#define VA_C5(item) ((unsigned long)(item) + BAST_VAM_CS5) -#define VA_C4(item) ((unsigned long)(item) + BAST_VAM_CS4) -#define VA_C3(item) ((unsigned long)(item) + BAST_VAM_CS3) -#define VA_C2(item) ((unsigned long)(item) + BAST_VAM_CS2) - -/* macros to modify the physical addresses for io space */ - -#define PA_CS2(item) (__phys_to_pfn((item) + S3C2410_CS2)) -#define PA_CS3(item) (__phys_to_pfn((item) + S3C2410_CS3)) -#define PA_CS4(item) (__phys_to_pfn((item) + S3C2410_CS4)) -#define PA_CS5(item) (__phys_to_pfn((item) + S3C2410_CS5)) - -static struct map_desc bast_iodesc[] __initdata = { - /* ISA IO areas */ - { - .virtual = (u32)S3C24XX_VA_ISA_BYTE, - .pfn = PA_CS2(BAST_PA_ISAIO), - .length = SZ_16M, - .type = MT_DEVICE, - }, { - .virtual = (u32)S3C24XX_VA_ISA_WORD, - .pfn = PA_CS3(BAST_PA_ISAIO), - .length = SZ_16M, - .type = MT_DEVICE, - }, - /* bast CPLD control registers, and external interrupt controls */ - { - .virtual = (u32)BAST_VA_CTRL1, - .pfn = __phys_to_pfn(BAST_PA_CTRL1), - .length = SZ_1M, - .type = MT_DEVICE, - }, { - .virtual = (u32)BAST_VA_CTRL2, - .pfn = __phys_to_pfn(BAST_PA_CTRL2), - .length = SZ_1M, - .type = MT_DEVICE, - }, { - .virtual = (u32)BAST_VA_CTRL3, - .pfn = __phys_to_pfn(BAST_PA_CTRL3), - .length = SZ_1M, - .type = MT_DEVICE, - }, { - .virtual = (u32)BAST_VA_CTRL4, - .pfn = __phys_to_pfn(BAST_PA_CTRL4), - .length = SZ_1M, - .type = MT_DEVICE, - }, - /* PC104 IRQ mux */ - { - .virtual = (u32)BAST_VA_PC104_IRQREQ, - .pfn = __phys_to_pfn(BAST_PA_PC104_IRQREQ), - .length = SZ_1M, - .type = MT_DEVICE, - }, { - .virtual = (u32)BAST_VA_PC104_IRQRAW, - .pfn = __phys_to_pfn(BAST_PA_PC104_IRQRAW), - .length = SZ_1M, - .type = MT_DEVICE, - }, { - .virtual = (u32)BAST_VA_PC104_IRQMASK, - .pfn = __phys_to_pfn(BAST_PA_PC104_IRQMASK), - .length = SZ_1M, - .type = MT_DEVICE, - }, - - /* peripheral space... one for each of fast/slow/byte/16bit */ - /* note, ide is only decoded in word space, even though some registers - * are only 8bit */ - - /* slow, byte */ - { VA_C2(BAST_VA_ISAIO), PA_CS2(BAST_PA_ISAIO), SZ_16M, MT_DEVICE }, - { VA_C2(BAST_VA_ISAMEM), PA_CS2(BAST_PA_ISAMEM), SZ_16M, MT_DEVICE }, - { VA_C2(BAST_VA_SUPERIO), PA_CS2(BAST_PA_SUPERIO), SZ_1M, MT_DEVICE }, - - /* slow, word */ - { VA_C3(BAST_VA_ISAIO), PA_CS3(BAST_PA_ISAIO), SZ_16M, MT_DEVICE }, - { VA_C3(BAST_VA_ISAMEM), PA_CS3(BAST_PA_ISAMEM), SZ_16M, MT_DEVICE }, - { VA_C3(BAST_VA_SUPERIO), PA_CS3(BAST_PA_SUPERIO), SZ_1M, MT_DEVICE }, - - /* fast, byte */ - { VA_C4(BAST_VA_ISAIO), PA_CS4(BAST_PA_ISAIO), SZ_16M, MT_DEVICE }, - { VA_C4(BAST_VA_ISAMEM), PA_CS4(BAST_PA_ISAMEM), SZ_16M, MT_DEVICE }, - { VA_C4(BAST_VA_SUPERIO), PA_CS4(BAST_PA_SUPERIO), SZ_1M, MT_DEVICE }, - - /* fast, word */ - { VA_C5(BAST_VA_ISAIO), PA_CS5(BAST_PA_ISAIO), SZ_16M, MT_DEVICE }, - { VA_C5(BAST_VA_ISAMEM), PA_CS5(BAST_PA_ISAMEM), SZ_16M, MT_DEVICE }, - { VA_C5(BAST_VA_SUPERIO), PA_CS5(BAST_PA_SUPERIO), SZ_1M, MT_DEVICE }, -}; - -#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK -#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB -#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE - -static struct s3c2410_uartcfg bast_uartcfgs[] __initdata = { - [0] = { - .hwport = 0, - .flags = 0, - .ucon = UCON, - .ulcon = ULCON, - .ufcon = UFCON, - }, - [1] = { - .hwport = 1, - .flags = 0, - .ucon = UCON, - .ulcon = ULCON, - .ufcon = UFCON, - }, - /* port 2 is not actually used */ - [2] = { - .hwport = 2, - .flags = 0, - .ucon = UCON, - .ulcon = ULCON, - .ufcon = UFCON, - } -}; - -/* NAND Flash on BAST board */ - -#ifdef CONFIG_PM -static int bast_pm_suspend(void) -{ - /* ensure that an nRESET is not generated on resume. */ - gpio_direction_output(S3C2410_GPA(21), 1); - return 0; -} - -static void bast_pm_resume(void) -{ - s3c_gpio_cfgpin(S3C2410_GPA(21), S3C2410_GPA21_nRSTOUT); -} - -#else -#define bast_pm_suspend NULL -#define bast_pm_resume NULL -#endif - -static struct syscore_ops bast_pm_syscore_ops = { - .suspend = bast_pm_suspend, - .resume = bast_pm_resume, -}; - -static int smartmedia_map[] = { 0 }; -static int chip0_map[] = { 1 }; -static int chip1_map[] = { 2 }; -static int chip2_map[] = { 3 }; - -static struct mtd_partition __initdata bast_default_nand_part[] = { - [0] = { - .name = "Boot Agent", - .size = SZ_16K, - .offset = 0, - }, - [1] = { - .name = "/boot", - .size = SZ_4M - SZ_16K, - .offset = SZ_16K, - }, - [2] = { - .name = "user", - .offset = SZ_4M, - .size = MTDPART_SIZ_FULL, - } -}; - -/* the bast has 4 selectable slots for nand-flash, the three - * on-board chip areas, as well as the external SmartMedia - * slot. - * - * Note, there is no current hot-plug support for the SmartMedia - * socket. -*/ - -static struct s3c2410_nand_set __initdata bast_nand_sets[] = { - [0] = { - .name = "SmartMedia", - .nr_chips = 1, - .nr_map = smartmedia_map, - .options = NAND_SCAN_SILENT_NODEV, - .nr_partitions = ARRAY_SIZE(bast_default_nand_part), - .partitions = bast_default_nand_part, - }, - [1] = { - .name = "chip0", - .nr_chips = 1, - .nr_map = chip0_map, - .nr_partitions = ARRAY_SIZE(bast_default_nand_part), - .partitions = bast_default_nand_part, - }, - [2] = { - .name = "chip1", - .nr_chips = 1, - .nr_map = chip1_map, - .options = NAND_SCAN_SILENT_NODEV, - .nr_partitions = ARRAY_SIZE(bast_default_nand_part), - .partitions = bast_default_nand_part, - }, - [3] = { - .name = "chip2", - .nr_chips = 1, - .nr_map = chip2_map, - .options = NAND_SCAN_SILENT_NODEV, - .nr_partitions = ARRAY_SIZE(bast_default_nand_part), - .partitions = bast_default_nand_part, - } -}; - -static void bast_nand_select(struct s3c2410_nand_set *set, int slot) -{ - unsigned int tmp; - - slot = set->nr_map[slot] & 3; - - pr_debug("bast_nand: selecting slot %d (set %p,%p)\n", - slot, set, set->nr_map); - - tmp = __raw_readb(BAST_VA_CTRL2); - tmp &= BAST_CPLD_CTLR2_IDERST; - tmp |= slot; - tmp |= BAST_CPLD_CTRL2_WNAND; - - pr_debug("bast_nand: ctrl2 now %02x\n", tmp); - - __raw_writeb(tmp, BAST_VA_CTRL2); -} - -static struct s3c2410_platform_nand __initdata bast_nand_info = { - .tacls = 30, - .twrph0 = 60, - .twrph1 = 60, - .nr_sets = ARRAY_SIZE(bast_nand_sets), - .sets = bast_nand_sets, - .select_chip = bast_nand_select, -}; - -/* DM9000 */ - -static struct resource bast_dm9k_resource[] = { - [0] = { - .start = S3C2410_CS5 + BAST_PA_DM9000, - .end = S3C2410_CS5 + BAST_PA_DM9000 + 3, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = S3C2410_CS5 + BAST_PA_DM9000 + 0x40, - .end = S3C2410_CS5 + BAST_PA_DM9000 + 0x40 + 0x3f, - .flags = IORESOURCE_MEM, - }, - [2] = { - .start = IRQ_DM9000, - .end = IRQ_DM9000, - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, - } - -}; - -/* for the moment we limit ourselves to 16bit IO until some - * better IO routines can be written and tested -*/ - -static struct dm9000_plat_data bast_dm9k_platdata = { - .flags = DM9000_PLATF_16BITONLY, -}; - -static struct platform_device bast_device_dm9k = { - .name = "dm9000", - .id = 0, - .num_resources = ARRAY_SIZE(bast_dm9k_resource), - .resource = bast_dm9k_resource, - .dev = { - .platform_data = &bast_dm9k_platdata, - } -}; - -/* serial devices */ - -#define SERIAL_BASE (S3C2410_CS2 + BAST_PA_SUPERIO) -#define SERIAL_FLAGS (UPF_BOOT_AUTOCONF | UPF_IOREMAP | UPF_SHARE_IRQ) -#define SERIAL_CLK (1843200) - -static struct plat_serial8250_port bast_sio_data[] = { - [0] = { - .mapbase = SERIAL_BASE + 0x2f8, - .irq = IRQ_PCSERIAL1, - .flags = SERIAL_FLAGS, - .iotype = UPIO_MEM, - .regshift = 0, - .uartclk = SERIAL_CLK, - }, - [1] = { - .mapbase = SERIAL_BASE + 0x3f8, - .irq = IRQ_PCSERIAL2, - .flags = SERIAL_FLAGS, - .iotype = UPIO_MEM, - .regshift = 0, - .uartclk = SERIAL_CLK, - }, - { } -}; - -static struct platform_device bast_sio = { - .name = "serial8250", - .id = PLAT8250_DEV_PLATFORM, - .dev = { - .platform_data = &bast_sio_data, - }, -}; - -/* we have devices on the bus which cannot work much over the - * standard 100KHz i2c bus frequency -*/ - -static struct s3c2410_platform_i2c __initdata bast_i2c_info = { - .flags = 0, - .slave_addr = 0x10, - .frequency = 100*1000, -}; - -/* Asix AX88796 10/100 ethernet controller */ - -static struct ax_plat_data bast_asix_platdata = { - .flags = AXFLG_MAC_FROMDEV, - .wordlength = 2, - .dcr_val = 0x48, - .rcr_val = 0x40, -}; - -static struct resource bast_asix_resource[] = { - [0] = { - .start = S3C2410_CS5 + BAST_PA_ASIXNET, - .end = S3C2410_CS5 + BAST_PA_ASIXNET + (0x18 * 0x20) - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = S3C2410_CS5 + BAST_PA_ASIXNET + (0x1f * 0x20), - .end = S3C2410_CS5 + BAST_PA_ASIXNET + (0x1f * 0x20), - .flags = IORESOURCE_MEM, - }, - [2] = { - .start = IRQ_ASIX, - .end = IRQ_ASIX, - .flags = IORESOURCE_IRQ - } -}; - -static struct platform_device bast_device_asix = { - .name = "ax88796", - .id = 0, - .num_resources = ARRAY_SIZE(bast_asix_resource), - .resource = bast_asix_resource, - .dev = { - .platform_data = &bast_asix_platdata - } -}; - -/* Asix AX88796 10/100 ethernet controller parallel port */ - -static struct resource bast_asixpp_resource[] = { - [0] = { - .start = S3C2410_CS5 + BAST_PA_ASIXNET + (0x18 * 0x20), - .end = S3C2410_CS5 + BAST_PA_ASIXNET + (0x1b * 0x20) - 1, - .flags = IORESOURCE_MEM, - } -}; - -static struct platform_device bast_device_axpp = { - .name = "ax88796-pp", - .id = 0, - .num_resources = ARRAY_SIZE(bast_asixpp_resource), - .resource = bast_asixpp_resource, -}; - -/* LCD/VGA controller */ - -static struct s3c2410fb_display __initdata bast_lcd_info[] = { - { - .type = S3C2410_LCDCON1_TFT, - .width = 640, - .height = 480, - - .pixclock = 33333, - .xres = 640, - .yres = 480, - .bpp = 4, - .left_margin = 40, - .right_margin = 20, - .hsync_len = 88, - .upper_margin = 30, - .lower_margin = 32, - .vsync_len = 3, - - .lcdcon5 = 0x00014b02, - }, - { - .type = S3C2410_LCDCON1_TFT, - .width = 640, - .height = 480, - - .pixclock = 33333, - .xres = 640, - .yres = 480, - .bpp = 8, - .left_margin = 40, - .right_margin = 20, - .hsync_len = 88, - .upper_margin = 30, - .lower_margin = 32, - .vsync_len = 3, - - .lcdcon5 = 0x00014b02, - }, - { - .type = S3C2410_LCDCON1_TFT, - .width = 640, - .height = 480, - - .pixclock = 33333, - .xres = 640, - .yres = 480, - .bpp = 16, - .left_margin = 40, - .right_margin = 20, - .hsync_len = 88, - .upper_margin = 30, - .lower_margin = 32, - .vsync_len = 3, - - .lcdcon5 = 0x00014b02, - }, -}; - -/* LCD/VGA controller */ - -static struct s3c2410fb_mach_info __initdata bast_fb_info = { - - .displays = bast_lcd_info, - .num_displays = ARRAY_SIZE(bast_lcd_info), - .default_display = 1, -}; - -/* I2C devices fitted. */ - -static struct i2c_board_info bast_i2c_devs[] __initdata = { - { - I2C_BOARD_INFO("tlv320aic23", 0x1a), - }, { - I2C_BOARD_INFO("simtec-pmu", 0x6b), - }, { - I2C_BOARD_INFO("ch7013", 0x75), - }, -}; - -static struct s3c_hwmon_pdata bast_hwmon_info = { - /* LCD contrast (0-6.6V) */ - .in[0] = &(struct s3c_hwmon_chcfg) { - .name = "lcd-contrast", - .mult = 3300, - .div = 512, - }, - /* LED current feedback */ - .in[1] = &(struct s3c_hwmon_chcfg) { - .name = "led-feedback", - .mult = 3300, - .div = 1024, - }, - /* LCD feedback (0-6.6V) */ - .in[2] = &(struct s3c_hwmon_chcfg) { - .name = "lcd-feedback", - .mult = 3300, - .div = 512, - }, - /* Vcore (1.8-2.0V), Vref 3.3V */ - .in[3] = &(struct s3c_hwmon_chcfg) { - .name = "vcore", - .mult = 3300, - .div = 1024, - }, -}; - -/* Standard BAST devices */ -// cat /sys/devices/platform/s3c24xx-adc/s3c-hwmon/in_0 - -static struct platform_device *bast_devices[] __initdata = { - &s3c_device_ohci, - &s3c_device_lcd, - &s3c_device_wdt, - &s3c_device_i2c0, - &s3c_device_rtc, - &s3c_device_nand, - &s3c_device_adc, - &s3c_device_hwmon, - &bast_device_dm9k, - &bast_device_asix, - &bast_device_axpp, - &bast_sio, -}; - -static struct clk *bast_clocks[] __initdata = { - &s3c24xx_dclk0, - &s3c24xx_dclk1, - &s3c24xx_clkout0, - &s3c24xx_clkout1, - &s3c24xx_uclk, -}; - -static struct s3c_cpufreq_board __initdata bast_cpufreq = { - .refresh = 7800, /* 7.8usec */ - .auto_io = 1, - .need_io = 1, -}; - -static struct s3c24xx_audio_simtec_pdata __initdata bast_audio = { - .have_mic = 1, - .have_lout = 1, -}; - -static void __init bast_map_io(void) -{ - /* initialise the clocks */ - - s3c24xx_dclk0.parent = &clk_upll; - s3c24xx_dclk0.rate = 12*1000*1000; - - s3c24xx_dclk1.parent = &clk_upll; - s3c24xx_dclk1.rate = 24*1000*1000; - - s3c24xx_clkout0.parent = &s3c24xx_dclk0; - s3c24xx_clkout1.parent = &s3c24xx_dclk1; - - s3c24xx_uclk.parent = &s3c24xx_clkout1; - - s3c24xx_register_clocks(bast_clocks, ARRAY_SIZE(bast_clocks)); - - s3c_hwmon_set_platdata(&bast_hwmon_info); - - s3c24xx_init_io(bast_iodesc, ARRAY_SIZE(bast_iodesc)); - s3c24xx_init_clocks(0); - s3c24xx_init_uarts(bast_uartcfgs, ARRAY_SIZE(bast_uartcfgs)); -} - -static void __init bast_init(void) -{ - register_syscore_ops(&bast_pm_syscore_ops); - - s3c_i2c0_set_platdata(&bast_i2c_info); - s3c_nand_set_platdata(&bast_nand_info); - s3c24xx_fb_set_platdata(&bast_fb_info); - platform_add_devices(bast_devices, ARRAY_SIZE(bast_devices)); - - i2c_register_board_info(0, bast_i2c_devs, - ARRAY_SIZE(bast_i2c_devs)); - - usb_simtec_init(); - nor_simtec_init(); - simtec_audio_add(NULL, true, &bast_audio); - - WARN_ON(gpio_request(S3C2410_GPA(21), "bast nreset")); - - s3c_cpufreq_setboard(&bast_cpufreq); -} - -MACHINE_START(BAST, "Simtec-BAST") - /* Maintainer: Ben Dooks */ - .atag_offset = 0x100, - .map_io = bast_map_io, - .init_irq = s3c24xx_init_irq, - .init_machine = bast_init, - .timer = &s3c24xx_timer, - .restart = s3c2410_restart, -MACHINE_END diff --git a/arch/arm/mach-s3c2410/mach-h1940.c b/arch/arm/mach-s3c2410/mach-h1940.c deleted file mode 100644 index 41245a603981..000000000000 --- a/arch/arm/mach-s3c2410/mach-h1940.c +++ /dev/null @@ -1,757 +0,0 @@ -/* linux/arch/arm/mach-s3c2410/mach-h1940.c - * - * Copyright (c) 2003-2005 Simtec Electronics - * Ben Dooks - * - * http://www.handhelds.org/projects/h1940.html - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * -*/ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include