From f5786b8e934e77f76f689c515baa582ff5a196ec Mon Sep 17 00:00:00 2001 From: Philipp Zabel Date: Fri, 21 Jun 2013 15:36:11 +0200 Subject: ARM i.MX53: Fix UART pad configuration The current default pad configuration for UART RX and TX pads sets a 360k pull-down and writes 1 to a reserved bit (1 << 0). It doesn't seem right to me that in idle state, the UART has to keep the signal high against a pull-down resistor. This patch instead sets a 100k pull-up, which incidentally corresponds to the register reset value for all but one (MX53_PAD_KEY_ROW0__UART4_RXD_MUX) pad, and removes the write to the reserved bit. Signed-off-by: Philipp Zabel Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx53.dtsi | 32 ++++++++++++++++---------------- 1 file changed, 16 insertions(+), 16 deletions(-) diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi index 3895fbba8fce..569aa9f2c4ed 100644 --- a/arch/arm/boot/dts/imx53.dtsi +++ b/arch/arm/boot/dts/imx53.dtsi @@ -725,15 +725,15 @@ uart1 { pinctrl_uart1_1: uart1grp-1 { fsl,pins = < - MX53_PAD_CSI0_DAT10__UART1_TXD_MUX 0x1c5 - MX53_PAD_CSI0_DAT11__UART1_RXD_MUX 0x1c5 + MX53_PAD_CSI0_DAT10__UART1_TXD_MUX 0x1e4 + MX53_PAD_CSI0_DAT11__UART1_RXD_MUX 0x1e4 >; }; pinctrl_uart1_2: uart1grp-2 { fsl,pins = < - MX53_PAD_PATA_DIOW__UART1_TXD_MUX 0x1c5 - MX53_PAD_PATA_DMACK__UART1_RXD_MUX 0x1c5 + MX53_PAD_PATA_DIOW__UART1_TXD_MUX 0x1e4 + MX53_PAD_PATA_DMACK__UART1_RXD_MUX 0x1e4 >; }; @@ -748,8 +748,8 @@ uart2 { pinctrl_uart2_1: uart2grp-1 { fsl,pins = < - MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX 0x1c5 - MX53_PAD_PATA_DMARQ__UART2_TXD_MUX 0x1c5 + MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX 0x1e4 + MX53_PAD_PATA_DMARQ__UART2_TXD_MUX 0x1e4 >; }; @@ -766,17 +766,17 @@ uart3 { pinctrl_uart3_1: uart3grp-1 { fsl,pins = < - MX53_PAD_PATA_CS_0__UART3_TXD_MUX 0x1c5 - MX53_PAD_PATA_CS_1__UART3_RXD_MUX 0x1c5 - MX53_PAD_PATA_DA_1__UART3_CTS 0x1c5 - MX53_PAD_PATA_DA_2__UART3_RTS 0x1c5 + MX53_PAD_PATA_CS_0__UART3_TXD_MUX 0x1e4 + MX53_PAD_PATA_CS_1__UART3_RXD_MUX 0x1e4 + MX53_PAD_PATA_DA_1__UART3_CTS 0x1e4 + MX53_PAD_PATA_DA_2__UART3_RTS 0x1e4 >; }; pinctrl_uart3_2: uart3grp-2 { fsl,pins = < - MX53_PAD_PATA_CS_0__UART3_TXD_MUX 0x1c5 - MX53_PAD_PATA_CS_1__UART3_RXD_MUX 0x1c5 + MX53_PAD_PATA_CS_0__UART3_TXD_MUX 0x1e4 + MX53_PAD_PATA_CS_1__UART3_RXD_MUX 0x1e4 >; }; @@ -785,8 +785,8 @@ uart4 { pinctrl_uart4_1: uart4grp-1 { fsl,pins = < - MX53_PAD_KEY_COL0__UART4_TXD_MUX 0x1c5 - MX53_PAD_KEY_ROW0__UART4_RXD_MUX 0x1c5 + MX53_PAD_KEY_COL0__UART4_TXD_MUX 0x1e4 + MX53_PAD_KEY_ROW0__UART4_RXD_MUX 0x1e4 >; }; }; @@ -794,8 +794,8 @@ uart5 { pinctrl_uart5_1: uart5grp-1 { fsl,pins = < - MX53_PAD_KEY_COL1__UART5_TXD_MUX 0x1c5 - MX53_PAD_KEY_ROW1__UART5_RXD_MUX 0x1c5 + MX53_PAD_KEY_COL1__UART5_TXD_MUX 0x1e4 + MX53_PAD_KEY_ROW1__UART5_RXD_MUX 0x1e4 >; }; }; -- cgit v1.2.3 From bf81e2f1006d10694bcb62c1a001f3a786b902ac Mon Sep 17 00:00:00 2001 From: Markus Pargmann Date: Sun, 23 Jun 2013 10:51:10 +0200 Subject: ARM: imx27: Fix documentation for SPLL clock spll_gate was added with commit b7eed2076183994dbda2c19bc7fba99b65a135e3 "ARM: imx27: add a clock gate to activate SPLL clock". spll_gate is missing in the devicetree clock documentation for imx27. This patch adds it to the list of clocks in the documentation. Signed-off-by: Markus Pargmann Signed-off-by: Shawn Guo --- Documentation/devicetree/bindings/clock/imx27-clock.txt | 1 + 1 file changed, 1 insertion(+) diff --git a/Documentation/devicetree/bindings/clock/imx27-clock.txt b/Documentation/devicetree/bindings/clock/imx27-clock.txt index ab1a56e9de9d..7a2070393732 100644 --- a/Documentation/devicetree/bindings/clock/imx27-clock.txt +++ b/Documentation/devicetree/bindings/clock/imx27-clock.txt @@ -98,6 +98,7 @@ clocks and IDs. fpm 83 mpll_osc_sel 84 mpll_sel 85 + spll_gate 86 Examples: -- cgit v1.2.3 From 0d5ca6d973b54f76eaccf86116dd0c66b073afc5 Mon Sep 17 00:00:00 2001 From: Alexander Shiyan Date: Sun, 23 Jun 2013 17:40:35 +0400 Subject: ARM: i.MX27: Typo fix Signed-off-by: Alexander Shiyan Acked-by: Sascha Hauer Signed-off-by: Shawn Guo --- arch/arm/mach-imx/mx27.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-imx/mx27.h b/arch/arm/mach-imx/mx27.h index e074616d54ca..8a65f192e7f3 100644 --- a/arch/arm/mach-imx/mx27.h +++ b/arch/arm/mach-imx/mx27.h @@ -135,7 +135,7 @@ #define MX27_INT_GPT4 (NR_IRQS_LEGACY + 4) #define MX27_INT_RTIC (NR_IRQS_LEGACY + 5) #define MX27_INT_CSPI3 (NR_IRQS_LEGACY + 6) -#define MX27_INT_SDHC (NR_IRQS_LEGACY + 7) +#define MX27_INT_MSHC (NR_IRQS_LEGACY + 7) #define MX27_INT_GPIO (NR_IRQS_LEGACY + 8) #define MX27_INT_SDHC3 (NR_IRQS_LEGACY + 9) #define MX27_INT_SDHC2 (NR_IRQS_LEGACY + 10) -- cgit v1.2.3 From ceac9b9214df539ca814a784c2af94f554bc78d4 Mon Sep 17 00:00:00 2001 From: Philipp Zabel Date: Wed, 26 Jun 2013 15:08:48 +0200 Subject: ARM i.MX6Q: Fix IOMUXC GPR1 defines for ENET_CLK_SEL and IPU1/2_MUX Signed-off-by: Philipp Zabel Signed-off-by: Shawn Guo --- include/linux/mfd/syscon/imx6q-iomuxc-gpr.h | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/include/linux/mfd/syscon/imx6q-iomuxc-gpr.h b/include/linux/mfd/syscon/imx6q-iomuxc-gpr.h index dab34a1deb2c..b1521e82fecf 100644 --- a/include/linux/mfd/syscon/imx6q-iomuxc-gpr.h +++ b/include/linux/mfd/syscon/imx6q-iomuxc-gpr.h @@ -103,15 +103,15 @@ #define IMX6Q_GPR1_EXC_MON_MASK BIT(22) #define IMX6Q_GPR1_EXC_MON_OKAY 0x0 #define IMX6Q_GPR1_EXC_MON_SLVE BIT(22) -#define IMX6Q_GPR1_MIPI_IPU2_SEL_MASK BIT(21) -#define IMX6Q_GPR1_MIPI_IPU2_SEL_GASKET 0x0 -#define IMX6Q_GPR1_MIPI_IPU2_SEL_IOMUX BIT(21) -#define IMX6Q_GPR1_MIPI_IPU1_MUX_MASK BIT(20) -#define IMX6Q_GPR1_MIPI_IPU1_MUX_GASKET 0x0 -#define IMX6Q_GPR1_MIPI_IPU1_MUX_IOMUX BIT(20) -#define IMX6Q_GPR1_MIPI_IPU2_MUX_MASK BIT(19) +#define IMX6Q_GPR1_ENET_CLK_SEL_MASK BIT(21) +#define IMX6Q_GPR1_ENET_CLK_SEL_PAD 0 +#define IMX6Q_GPR1_ENET_CLK_SEL_ANATOP BIT(21) +#define IMX6Q_GPR1_MIPI_IPU2_MUX_MASK BIT(20) #define IMX6Q_GPR1_MIPI_IPU2_MUX_GASKET 0x0 -#define IMX6Q_GPR1_MIPI_IPU2_MUX_IOMUX BIT(19) +#define IMX6Q_GPR1_MIPI_IPU2_MUX_IOMUX BIT(20) +#define IMX6Q_GPR1_MIPI_IPU1_MUX_MASK BIT(19) +#define IMX6Q_GPR1_MIPI_IPU1_MUX_GASKET 0x0 +#define IMX6Q_GPR1_MIPI_IPU1_MUX_IOMUX BIT(19) #define IMX6Q_GPR1_PCIE_TEST_PD BIT(18) #define IMX6Q_GPR1_IPU_VPU_MUX_MASK BIT(17) #define IMX6Q_GPR1_IPU_VPU_MUX_IPU1 0x0 -- cgit v1.2.3 From 3b79cd15bfc5f1ddb5e387310fa3dbb09b81b552 Mon Sep 17 00:00:00 2001 From: Liu Ying Date: Wed, 3 Jul 2013 15:29:06 +0800 Subject: ARM: i.MX6Q: correct emi_sel clock muxing The correct muxing for emi_sel clock should be 2b'00 - 396M PFD 2b'01 - PLL3 2b'10 - AXI clk root 2b'11 - 352M PFD This patch corrects the muxing in the clock driver. Signed-off-by: Liu Ying Signed-off-by: Shawn Guo Acked-by: Dirk Behme --- arch/arm/mach-imx/clk-imx6q.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c index 4282e99f5ca1..86567d980b07 100644 --- a/arch/arm/mach-imx/clk-imx6q.c +++ b/arch/arm/mach-imx/clk-imx6q.c @@ -199,7 +199,8 @@ static const char *pcie_axi_sels[] = { "axi", "ahb", }; static const char *ssi_sels[] = { "pll3_pfd2_508m", "pll3_pfd3_454m", "pll4_post_div", }; static const char *usdhc_sels[] = { "pll2_pfd2_396m", "pll2_pfd0_352m", }; static const char *enfc_sels[] = { "pll2_pfd0_352m", "pll2_bus", "pll3_usb_otg", "pll2_pfd2_396m", }; -static const char *emi_sels[] = { "axi", "pll3_usb_otg", "pll2_pfd2_396m", "pll2_pfd0_352m", }; +static const char *emi_sels[] = { "pll2_pfd2_396m", "pll3_usb_otg", "axi", "pll2_pfd0_352m", }; +static const char *emi_slow_sels[] = { "axi", "pll3_usb_otg", "pll2_pfd2_396m", "pll2_pfd0_352m", }; static const char *vdo_axi_sels[] = { "axi", "ahb", }; static const char *vpu_axi_sels[] = { "axi", "pll2_pfd2_396m", "pll2_pfd0_352m", }; static const char *cko1_sels[] = { "pll3_usb_otg", "pll2_bus", "pll1_sys", "pll5_video_div", @@ -392,7 +393,7 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node) clk[usdhc4_sel] = imx_clk_mux("usdhc4_sel", base + 0x1c, 19, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels)); clk[enfc_sel] = imx_clk_mux("enfc_sel", base + 0x2c, 16, 2, enfc_sels, ARRAY_SIZE(enfc_sels)); clk[emi_sel] = imx_clk_mux("emi_sel", base + 0x1c, 27, 2, emi_sels, ARRAY_SIZE(emi_sels)); - clk[emi_slow_sel] = imx_clk_mux("emi_slow_sel", base + 0x1c, 29, 2, emi_sels, ARRAY_SIZE(emi_sels)); + clk[emi_slow_sel] = imx_clk_mux("emi_slow_sel", base + 0x1c, 29, 2, emi_slow_sels, ARRAY_SIZE(emi_slow_sels)); clk[vdo_axi_sel] = imx_clk_mux("vdo_axi_sel", base + 0x18, 11, 1, vdo_axi_sels, ARRAY_SIZE(vdo_axi_sels)); clk[vpu_axi_sel] = imx_clk_mux("vpu_axi_sel", base + 0x18, 14, 2, vpu_axi_sels, ARRAY_SIZE(vpu_axi_sels)); clk[cko1_sel] = imx_clk_mux("cko1_sel", base + 0x60, 0, 4, cko1_sels, ARRAY_SIZE(cko1_sels)); -- cgit v1.2.3 From 66acaf3f897c9245f5456d884e5ae401700cbc45 Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Mon, 1 Jul 2013 15:46:05 +0800 Subject: ARM: mxs: saif0 is the clock provider to sgtl5000 These systems all use saif0 as the mclock provider to codec sgtl5000. Reflect that in device tree source, so that sgtl5000 can find the clock by calling clk_get(). Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx28-apx4devkit.dts | 2 +- arch/arm/boot/dts/imx28-evk.dts | 2 +- arch/arm/boot/dts/imx28-m28evk.dts | 2 +- arch/arm/boot/dts/imx28.dtsi | 1 + 4 files changed, 4 insertions(+), 3 deletions(-) diff --git a/arch/arm/boot/dts/imx28-apx4devkit.dts b/arch/arm/boot/dts/imx28-apx4devkit.dts index 43bf3c796cba..0e7fed47bd8d 100644 --- a/arch/arm/boot/dts/imx28-apx4devkit.dts +++ b/arch/arm/boot/dts/imx28-apx4devkit.dts @@ -147,7 +147,7 @@ reg = <0x0a>; VDDA-supply = <®_3p3v>; VDDIO-supply = <®_3p3v>; - + clocks = <&saif0>; }; pcf8563: rtc@51 { diff --git a/arch/arm/boot/dts/imx28-evk.dts b/arch/arm/boot/dts/imx28-evk.dts index 1f0d38d7b16f..e035f4664b97 100644 --- a/arch/arm/boot/dts/imx28-evk.dts +++ b/arch/arm/boot/dts/imx28-evk.dts @@ -195,7 +195,7 @@ reg = <0x0a>; VDDA-supply = <®_3p3v>; VDDIO-supply = <®_3p3v>; - + clocks = <&saif0>; }; at24@51 { diff --git a/arch/arm/boot/dts/imx28-m28evk.dts b/arch/arm/boot/dts/imx28-m28evk.dts index 880df2f13be8..44d9da57736e 100644 --- a/arch/arm/boot/dts/imx28-m28evk.dts +++ b/arch/arm/boot/dts/imx28-m28evk.dts @@ -184,7 +184,7 @@ reg = <0x0a>; VDDA-supply = <®_3p3v>; VDDIO-supply = <®_3p3v>; - + clocks = <&saif0>; }; eeprom: eeprom@51 { diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi index 6a8acb01b1d3..9524a0571281 100644 --- a/arch/arm/boot/dts/imx28.dtsi +++ b/arch/arm/boot/dts/imx28.dtsi @@ -837,6 +837,7 @@ compatible = "fsl,imx28-saif"; reg = <0x80042000 0x2000>; interrupts = <59 80>; + #clock-cells = <0>; clocks = <&clks 53>; dmas = <&dma_apbx 4>; dma-names = "rx-tx"; -- cgit v1.2.3 From 4f71612ee3a1b2d15c8246d926a40c4f7d21cc3b Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Wed, 10 Jul 2013 14:05:44 +0800 Subject: ARM: imx: fix vf610 enet module clock selection The fec/enet driver calculates MDC rate with the formula below. ref_freq / ((MII_SPEED + 1) x 2) The ref_freq here is the fec internal module clock, which is missing from clk-vf610 clock driver right now. And clk-vf610 driver mistakenly supplies RMII clock (50 MHz) as the source to fec. This results in the situation that fec driver gets ref_freq as 50 MHz, while physically it runs at 66 MHz (fec module clock physically sources from ipg which runs at 66 MHz). That's why software expects MDC runs at 2.5 MHz, while the measurement tells it runs at 3.3 MHz. And this causes the PHY KSZ8041 keeps swithing between Full and Half mode as below. libphy: 400d0000.etherne:00 - Link is Up - 100/Full libphy: 400d0000.etherne:00 - Link is Up - 100/Half libphy: 400d0000.etherne:00 - Link is Up - 100/Full libphy: 400d0000.etherne:00 - Link is Up - 100/Half libphy: 400d0000.etherne:00 - Link is Up - 100/Full libphy: 400d0000.etherne:00 - Link is Up - 100/Half Add the missing module clock for ENET0 and ENET1, and correct the clock supplying in device tree to fix above issue. Thanks to Alison Wang for debugging the issue. Signed-off-by: Shawn Guo --- arch/arm/boot/dts/vf610.dtsi | 8 ++++---- arch/arm/mach-imx/clk-vf610.c | 2 ++ include/dt-bindings/clock/vf610-clock.h | 4 +++- 3 files changed, 9 insertions(+), 5 deletions(-) diff --git a/arch/arm/boot/dts/vf610.dtsi b/arch/arm/boot/dts/vf610.dtsi index e1eb7dadda80..67d929cf9804 100644 --- a/arch/arm/boot/dts/vf610.dtsi +++ b/arch/arm/boot/dts/vf610.dtsi @@ -442,8 +442,8 @@ compatible = "fsl,mvf600-fec"; reg = <0x400d0000 0x1000>; interrupts = <0 78 0x04>; - clocks = <&clks VF610_CLK_ENET>, - <&clks VF610_CLK_ENET>, + clocks = <&clks VF610_CLK_ENET0>, + <&clks VF610_CLK_ENET0>, <&clks VF610_CLK_ENET>; clock-names = "ipg", "ahb", "ptp"; status = "disabled"; @@ -453,8 +453,8 @@ compatible = "fsl,mvf600-fec"; reg = <0x400d1000 0x1000>; interrupts = <0 79 0x04>; - clocks = <&clks VF610_CLK_ENET>, - <&clks VF610_CLK_ENET>, + clocks = <&clks VF610_CLK_ENET1>, + <&clks VF610_CLK_ENET1>, <&clks VF610_CLK_ENET>; clock-names = "ipg", "ahb", "ptp"; status = "disabled"; diff --git a/arch/arm/mach-imx/clk-vf610.c b/arch/arm/mach-imx/clk-vf610.c index d617c0b7c809..b169a396d93b 100644 --- a/arch/arm/mach-imx/clk-vf610.c +++ b/arch/arm/mach-imx/clk-vf610.c @@ -183,6 +183,8 @@ static void __init vf610_clocks_init(struct device_node *ccm_node) clk[VF610_CLK_ENET_TS_SEL] = imx_clk_mux("enet_ts_sel", CCM_CSCMR2, 0, 3, enet_ts_sels, 7); clk[VF610_CLK_ENET] = imx_clk_gate("enet", "enet_sel", CCM_CSCDR1, 24); clk[VF610_CLK_ENET_TS] = imx_clk_gate("enet_ts", "enet_ts_sel", CCM_CSCDR1, 23); + clk[VF610_CLK_ENET0] = imx_clk_gate2("enet0", "ipg_bus", CCM_CCGR9, CCM_CCGRx_CGn(0)); + clk[VF610_CLK_ENET1] = imx_clk_gate2("enet1", "ipg_bus", CCM_CCGR9, CCM_CCGRx_CGn(1)); clk[VF610_CLK_PIT] = imx_clk_gate2("pit", "ipg_bus", CCM_CCGR1, CCM_CCGRx_CGn(7)); diff --git a/include/dt-bindings/clock/vf610-clock.h b/include/dt-bindings/clock/vf610-clock.h index 15e997fa78f2..4aa2b48cd151 100644 --- a/include/dt-bindings/clock/vf610-clock.h +++ b/include/dt-bindings/clock/vf610-clock.h @@ -158,6 +158,8 @@ #define VF610_CLK_GPU_SEL 145 #define VF610_CLK_GPU_EN 146 #define VF610_CLK_GPU2D 147 -#define VF610_CLK_END 148 +#define VF610_CLK_ENET0 148 +#define VF610_CLK_ENET1 149 +#define VF610_CLK_END 150 #endif /* __DT_BINDINGS_CLOCK_VF610_H */ -- cgit v1.2.3 From 15968f1bd4341cfa54023348a4e0b94798211742 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Thu, 11 Jul 2013 16:37:47 +0200 Subject: ARM i.MX53: mba53: Fix PWM backlight DT node The i.MX53 PWM controller uses two cells to describe the PWM specifier. Remove the extra unused values from the backlight DT node pwms property. Signed-off-by: Laurent Pinchart Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx53-mba53.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/imx53-mba53.dts b/arch/arm/boot/dts/imx53-mba53.dts index aaa33bc99f78..a63090267941 100644 --- a/arch/arm/boot/dts/imx53-mba53.dts +++ b/arch/arm/boot/dts/imx53-mba53.dts @@ -27,7 +27,7 @@ backlight { compatible = "pwm-backlight"; - pwms = <&pwm2 0 50000 0 0>; + pwms = <&pwm2 0 50000>; brightness-levels = <0 24 28 32 36 40 44 48 52 56 60 64 68 72 76 80 84 88 92 96 100>; default-brightness-level = <10>; enable-gpios = <&gpio7 7 0>; -- cgit v1.2.3 From 84bb08472520882394fe16d7a3548793302563de Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Sun, 9 Jun 2013 22:07:47 -0300 Subject: ARM: dts: imx51-babbage: Pass a real clock to the codec On imx51_babbage the codec clock is activated via GPIO4_26. Provide a real clock to the sgtl5000 codec via device tree. Signed-off-by: Fabio Estevam Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx51-babbage.dts | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts index 6dd9486c755b..ad3471ca17c7 100644 --- a/arch/arm/boot/dts/imx51-babbage.dts +++ b/arch/arm/boot/dts/imx51-babbage.dts @@ -61,6 +61,16 @@ mux-int-port = <2>; mux-ext-port = <3>; }; + + clocks { + clk_26M: codec_clock { + compatible = "fixed-clock"; + reg=<0>; + #clock-cells = <0>; + clock-frequency = <26000000>; + gpios = <&gpio4 26 1>; + }; + }; }; &esdhc1 { @@ -229,6 +239,7 @@ MX51_PAD_EIM_A27__GPIO2_21 0x5 MX51_PAD_CSPI1_SS0__GPIO4_24 0x85 MX51_PAD_CSPI1_SS1__GPIO4_25 0x85 + MX51_PAD_CSPI1_RDY__GPIO4_26 0x80000000 >; }; }; @@ -255,7 +266,7 @@ sgtl5000: codec@0a { compatible = "fsl,sgtl5000"; reg = <0x0a>; - clock-frequency = <26000000>; + clocks = <&clk_26M>; VDDA-supply = <&vdig_reg>; VDDIO-supply = <&vvideo_reg>; }; -- cgit v1.2.3