From aa23317d0268b309bb3f0801ddd0d61813ff5afb Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sun, 25 Feb 2024 23:58:42 -0500 Subject: qibfs: fix dentry leak simple_recursive_removal() drops the pinning references to all positives in subtree. For the cases when its argument has been kept alive by the pinning alone that's exactly the right thing to do, but here the argument comes from dcache lookup, that needs to be balanced by explicit dput(). Fixes: e41d237818598 "qib_fs: switch to simple_recursive_removal()" Fucked-up-by: Al Viro Signed-off-by: Al Viro --- drivers/infiniband/hw/qib/qib_fs.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/infiniband/hw/qib/qib_fs.c b/drivers/infiniband/hw/qib/qib_fs.c index 455e966eeff3..b27791029fa9 100644 --- a/drivers/infiniband/hw/qib/qib_fs.c +++ b/drivers/infiniband/hw/qib/qib_fs.c @@ -439,6 +439,7 @@ static int remove_device_files(struct super_block *sb, return PTR_ERR(dir); } simple_recursive_removal(dir, NULL); + dput(dir); return 0; } -- cgit v1.2.3 From 546a4f4b5f4d930ea57f5510e109acf08eca5e87 Mon Sep 17 00:00:00 2001 From: Vasileios Amoiridis Date: Sat, 16 Mar 2024 12:07:42 +0100 Subject: iio: pressure: Fixes BME280 SPI driver data Use bme280_chip_info structure instead of bmp280_chip_info in SPI support for the BME280 sensor. Fixes: 0b0b772637cd ("iio: pressure: bmp280: Use chip_info pointers for each chip as driver data") Signed-off-by: Vasileios Amoiridis Link: https://lore.kernel.org/r/20240316110743.1998400-2-vassilisamir@gmail.com Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/pressure/bmp280-spi.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/iio/pressure/bmp280-spi.c b/drivers/iio/pressure/bmp280-spi.c index a444d4b2978b..038d36aad3eb 100644 --- a/drivers/iio/pressure/bmp280-spi.c +++ b/drivers/iio/pressure/bmp280-spi.c @@ -127,7 +127,7 @@ static const struct of_device_id bmp280_of_spi_match[] = { { .compatible = "bosch,bmp180", .data = &bmp180_chip_info }, { .compatible = "bosch,bmp181", .data = &bmp180_chip_info }, { .compatible = "bosch,bmp280", .data = &bmp280_chip_info }, - { .compatible = "bosch,bme280", .data = &bmp280_chip_info }, + { .compatible = "bosch,bme280", .data = &bme280_chip_info }, { .compatible = "bosch,bmp380", .data = &bmp380_chip_info }, { .compatible = "bosch,bmp580", .data = &bmp580_chip_info }, { }, @@ -139,7 +139,7 @@ static const struct spi_device_id bmp280_spi_id[] = { { "bmp180", (kernel_ulong_t)&bmp180_chip_info }, { "bmp181", (kernel_ulong_t)&bmp180_chip_info }, { "bmp280", (kernel_ulong_t)&bmp280_chip_info }, - { "bme280", (kernel_ulong_t)&bmp280_chip_info }, + { "bme280", (kernel_ulong_t)&bme280_chip_info }, { "bmp380", (kernel_ulong_t)&bmp380_chip_info }, { "bmp580", (kernel_ulong_t)&bmp580_chip_info }, { } -- cgit v1.2.3 From 5ca29ea4e4073b3caba750efe155b1bd4c597ca9 Mon Sep 17 00:00:00 2001 From: Vasileios Amoiridis Date: Sat, 16 Mar 2024 12:07:43 +0100 Subject: iio: pressure: Fixes SPI support for BMP3xx devices Bosch does not use unique BMPxxx_CHIP_ID for the different versions of the device which leads to misidentification of devices if their ID is used. Use a new value in the chip_info structure instead of the BMPxxx_CHIP_ID, in order to choose the correct regmap_bus to be used. Fixes: a9dd9ba32311 ("iio: pressure: Fixes BMP38x and BMP390 SPI support") Signed-off-by: Vasileios Amoiridis Link: https://lore.kernel.org/r/20240316110743.1998400-3-vassilisamir@gmail.com Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/pressure/bmp280-core.c | 1 + drivers/iio/pressure/bmp280-spi.c | 9 ++------- drivers/iio/pressure/bmp280.h | 1 + 3 files changed, 4 insertions(+), 7 deletions(-) diff --git a/drivers/iio/pressure/bmp280-core.c b/drivers/iio/pressure/bmp280-core.c index fe8734468ed3..62e9e93d915d 100644 --- a/drivers/iio/pressure/bmp280-core.c +++ b/drivers/iio/pressure/bmp280-core.c @@ -1233,6 +1233,7 @@ const struct bmp280_chip_info bmp380_chip_info = { .chip_id = bmp380_chip_ids, .num_chip_id = ARRAY_SIZE(bmp380_chip_ids), .regmap_config = &bmp380_regmap_config, + .spi_read_extra_byte = true, .start_up_time = 2000, .channels = bmp380_channels, .num_channels = 2, diff --git a/drivers/iio/pressure/bmp280-spi.c b/drivers/iio/pressure/bmp280-spi.c index 038d36aad3eb..4e19ea0b4d39 100644 --- a/drivers/iio/pressure/bmp280-spi.c +++ b/drivers/iio/pressure/bmp280-spi.c @@ -96,15 +96,10 @@ static int bmp280_spi_probe(struct spi_device *spi) chip_info = spi_get_device_match_data(spi); - switch (chip_info->chip_id[0]) { - case BMP380_CHIP_ID: - case BMP390_CHIP_ID: + if (chip_info->spi_read_extra_byte) bmp_regmap_bus = &bmp380_regmap_bus; - break; - default: + else bmp_regmap_bus = &bmp280_regmap_bus; - break; - } regmap = devm_regmap_init(&spi->dev, bmp_regmap_bus, diff --git a/drivers/iio/pressure/bmp280.h b/drivers/iio/pressure/bmp280.h index 4012387d7956..5812a344ed8e 100644 --- a/drivers/iio/pressure/bmp280.h +++ b/drivers/iio/pressure/bmp280.h @@ -423,6 +423,7 @@ struct bmp280_chip_info { int num_chip_id; const struct regmap_config *regmap_config; + bool spi_read_extra_byte; const struct iio_chan_spec *channels; int num_channels; -- cgit v1.2.3 From 89384a2b656b9dace4c965432a209d5c9c3a2a6f Mon Sep 17 00:00:00 2001 From: Javier Carrasco Date: Sat, 16 Mar 2024 23:56:57 +0100 Subject: dt-bindings: iio: health: maxim,max30102: fix compatible check The "maxim,green-led-current-microamp" property is only available for the max30105 part (it provides an extra green LED), and must be set to false for the max30102 part. Instead, the max30100 part has been used for that, which is not supported by this binding (it has its own binding). This error was introduced during the txt to yaml conversion. Fixes: 5a6a65b11e3a ("dt-bindings:iio:health:maxim,max30102: txt to yaml conversion") Signed-off-by: Javier Carrasco Acked-by: Conor Dooley Link: https://lore.kernel.org/r/20240316-max30102_binding_fix-v1-1-e8e58f69ef8a@gmail.com Cc: Signed-off-by: Jonathan Cameron --- Documentation/devicetree/bindings/iio/health/maxim,max30102.yaml | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/iio/health/maxim,max30102.yaml b/Documentation/devicetree/bindings/iio/health/maxim,max30102.yaml index c13c10c8d65d..eed0df9d3a23 100644 --- a/Documentation/devicetree/bindings/iio/health/maxim,max30102.yaml +++ b/Documentation/devicetree/bindings/iio/health/maxim,max30102.yaml @@ -42,7 +42,7 @@ allOf: properties: compatible: contains: - const: maxim,max30100 + const: maxim,max30102 then: properties: maxim,green-led-current-microamp: false -- cgit v1.2.3 From 57a1592784d622ecee0b71940c65429173996b33 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Tue, 26 Mar 2024 12:36:59 +0100 Subject: iio: accel: mxc4005: Interrupt handling fixes There are 2 issues with interrupt handling in the mxc4005 driver: 1. mxc4005_set_trigger_state() writes MXC4005_REG_INT_MASK1_BIT_DRDYE (0x01) to INT_MASK1 to enable the interrupt, but to disable the interrupt it writes ~MXC4005_REG_INT_MASK1_BIT_DRDYE which is 0xfe, so it enables all other interrupt sources in the INT_SRC1 register. On the MXC4005 this is not an issue because only bit 0 of the register is used. On the MXC6655 OTOH this is a problem since bit7 is used as TC (Temperature Compensation) disable bit and writing 1 to this disables Temperature Compensation which should only be done when running self-tests on the chip. Write 0 instead of ~MXC4005_REG_INT_MASK1_BIT_DRDYE to disable the interrupts to fix this. 2. The datasheets for the MXC4005 / MXC6655 do not state what the reset value for the INT_MASK0 and INT_MASK1 registers is and since these are write only we also cannot learn this from the hw. Presumably the reset value for both is all 0, which means all interrupts disabled. Explicitly set both registers to 0 from mxc4005_chip_init() to ensure both masks are actually set to 0. Fixes: 79846e33aac1 ("iio: accel: mxc4005: add support for mxc6655") Signed-off-by: Hans de Goede Link: https://lore.kernel.org/r/20240326113700.56725-2-hdegoede@redhat.com Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/accel/mxc4005.c | 24 +++++++++++++++++------- 1 file changed, 17 insertions(+), 7 deletions(-) diff --git a/drivers/iio/accel/mxc4005.c b/drivers/iio/accel/mxc4005.c index 61839be501c2..111f4bcf24ad 100644 --- a/drivers/iio/accel/mxc4005.c +++ b/drivers/iio/accel/mxc4005.c @@ -27,9 +27,13 @@ #define MXC4005_REG_ZOUT_UPPER 0x07 #define MXC4005_REG_ZOUT_LOWER 0x08 +#define MXC4005_REG_INT_MASK0 0x0A + #define MXC4005_REG_INT_MASK1 0x0B #define MXC4005_REG_INT_MASK1_BIT_DRDYE 0x01 +#define MXC4005_REG_INT_CLR0 0x00 + #define MXC4005_REG_INT_CLR1 0x01 #define MXC4005_REG_INT_CLR1_BIT_DRDYC 0x01 @@ -113,7 +117,9 @@ static bool mxc4005_is_readable_reg(struct device *dev, unsigned int reg) static bool mxc4005_is_writeable_reg(struct device *dev, unsigned int reg) { switch (reg) { + case MXC4005_REG_INT_CLR0: case MXC4005_REG_INT_CLR1: + case MXC4005_REG_INT_MASK0: case MXC4005_REG_INT_MASK1: case MXC4005_REG_CONTROL: return true; @@ -330,17 +336,13 @@ static int mxc4005_set_trigger_state(struct iio_trigger *trig, { struct iio_dev *indio_dev = iio_trigger_get_drvdata(trig); struct mxc4005_data *data = iio_priv(indio_dev); + unsigned int val; int ret; mutex_lock(&data->mutex); - if (state) { - ret = regmap_write(data->regmap, MXC4005_REG_INT_MASK1, - MXC4005_REG_INT_MASK1_BIT_DRDYE); - } else { - ret = regmap_write(data->regmap, MXC4005_REG_INT_MASK1, - ~MXC4005_REG_INT_MASK1_BIT_DRDYE); - } + val = state ? MXC4005_REG_INT_MASK1_BIT_DRDYE : 0; + ret = regmap_write(data->regmap, MXC4005_REG_INT_MASK1, val); if (ret < 0) { mutex_unlock(&data->mutex); dev_err(data->dev, "failed to update reg_int_mask1"); @@ -382,6 +384,14 @@ static int mxc4005_chip_init(struct mxc4005_data *data) dev_dbg(data->dev, "MXC4005 chip id %02x\n", reg); + ret = regmap_write(data->regmap, MXC4005_REG_INT_MASK0, 0); + if (ret < 0) + return dev_err_probe(data->dev, ret, "writing INT_MASK0\n"); + + ret = regmap_write(data->regmap, MXC4005_REG_INT_MASK1, 0); + if (ret < 0) + return dev_err_probe(data->dev, ret, "writing INT_MASK1\n"); + return 0; } -- cgit v1.2.3 From 6b8cffdc4a31e4a72f75ecd1bc13fbf0dafee390 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Tue, 26 Mar 2024 12:37:00 +0100 Subject: iio: accel: mxc4005: Reset chip on probe() and resume() On some designs the chip is not properly reset when powered up at boot or after a suspend/resume cycle. Use the sw-reset feature to ensure that the chip is in a clean state after probe() / resume() and in the case of resume() restore the settings (scale, trigger-enabled). Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218578 Signed-off-by: Hans de Goede Link: https://lore.kernel.org/r/20240326113700.56725-3-hdegoede@redhat.com Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/accel/mxc4005.c | 68 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 68 insertions(+) diff --git a/drivers/iio/accel/mxc4005.c b/drivers/iio/accel/mxc4005.c index 111f4bcf24ad..63c3566a533b 100644 --- a/drivers/iio/accel/mxc4005.c +++ b/drivers/iio/accel/mxc4005.c @@ -5,6 +5,7 @@ * Copyright (c) 2014, Intel Corporation. */ +#include #include #include #include @@ -36,6 +37,7 @@ #define MXC4005_REG_INT_CLR1 0x01 #define MXC4005_REG_INT_CLR1_BIT_DRDYC 0x01 +#define MXC4005_REG_INT_CLR1_SW_RST 0x10 #define MXC4005_REG_CONTROL 0x0D #define MXC4005_REG_CONTROL_MASK_FSR GENMASK(6, 5) @@ -43,6 +45,9 @@ #define MXC4005_REG_DEVICE_ID 0x0E +/* Datasheet does not specify a reset time, this is a conservative guess */ +#define MXC4005_RESET_TIME_US 2000 + enum mxc4005_axis { AXIS_X, AXIS_Y, @@ -66,6 +71,8 @@ struct mxc4005_data { s64 timestamp __aligned(8); } scan; bool trigger_enabled; + unsigned int control; + unsigned int int_mask1; }; /* @@ -349,6 +356,7 @@ static int mxc4005_set_trigger_state(struct iio_trigger *trig, return ret; } + data->int_mask1 = val; data->trigger_enabled = state; mutex_unlock(&data->mutex); @@ -384,6 +392,13 @@ static int mxc4005_chip_init(struct mxc4005_data *data) dev_dbg(data->dev, "MXC4005 chip id %02x\n", reg); + ret = regmap_write(data->regmap, MXC4005_REG_INT_CLR1, + MXC4005_REG_INT_CLR1_SW_RST); + if (ret < 0) + return dev_err_probe(data->dev, ret, "resetting chip\n"); + + fsleep(MXC4005_RESET_TIME_US); + ret = regmap_write(data->regmap, MXC4005_REG_INT_MASK0, 0); if (ret < 0) return dev_err_probe(data->dev, ret, "writing INT_MASK0\n"); @@ -479,6 +494,58 @@ static int mxc4005_probe(struct i2c_client *client) return devm_iio_device_register(&client->dev, indio_dev); } +static int mxc4005_suspend(struct device *dev) +{ + struct iio_dev *indio_dev = dev_get_drvdata(dev); + struct mxc4005_data *data = iio_priv(indio_dev); + int ret; + + /* Save control to restore it on resume */ + ret = regmap_read(data->regmap, MXC4005_REG_CONTROL, &data->control); + if (ret < 0) + dev_err(data->dev, "failed to read reg_control\n"); + + return ret; +} + +static int mxc4005_resume(struct device *dev) +{ + struct iio_dev *indio_dev = dev_get_drvdata(dev); + struct mxc4005_data *data = iio_priv(indio_dev); + int ret; + + ret = regmap_write(data->regmap, MXC4005_REG_INT_CLR1, + MXC4005_REG_INT_CLR1_SW_RST); + if (ret) { + dev_err(data->dev, "failed to reset chip: %d\n", ret); + return ret; + } + + fsleep(MXC4005_RESET_TIME_US); + + ret = regmap_write(data->regmap, MXC4005_REG_CONTROL, data->control); + if (ret) { + dev_err(data->dev, "failed to restore control register\n"); + return ret; + } + + ret = regmap_write(data->regmap, MXC4005_REG_INT_MASK0, 0); + if (ret) { + dev_err(data->dev, "failed to restore interrupt 0 mask\n"); + return ret; + } + + ret = regmap_write(data->regmap, MXC4005_REG_INT_MASK1, data->int_mask1); + if (ret) { + dev_err(data->dev, "failed to restore interrupt 1 mask\n"); + return ret; + } + + return 0; +} + +static DEFINE_SIMPLE_DEV_PM_OPS(mxc4005_pm_ops, mxc4005_suspend, mxc4005_resume); + static const struct acpi_device_id mxc4005_acpi_match[] = { {"MXC4005", 0}, {"MXC6655", 0}, @@ -506,6 +573,7 @@ static struct i2c_driver mxc4005_driver = { .name = MXC4005_DRV_NAME, .acpi_match_table = mxc4005_acpi_match, .of_match_table = mxc4005_of_match, + .pm = pm_sleep_ptr(&mxc4005_pm_ops), }, .probe = mxc4005_probe, .id_table = mxc4005_id, -- cgit v1.2.3 From d7ed5232f0f16181506373d73e711190d5e0c868 Mon Sep 17 00:00:00 2001 From: Yuezhang Mo Date: Sun, 31 Mar 2024 23:38:17 +0900 Subject: exfat: fix timing of synchronizing bitmap and inode Commit(f55c096f62f1 exfat: do not zero the extended part) changed the timing of synchronizing bitmap and inode in exfat_cont_expand(). The change caused xfstests generic/013 to fail if 'dirsync' or 'sync' is enabled. So this commit restores the timing. Fixes: f55c096f62f1 ("exfat: do not zero the extended part") Signed-off-by: Yuezhang Mo Signed-off-by: Namjae Jeon --- fs/exfat/file.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/fs/exfat/file.c b/fs/exfat/file.c index cc00f1a7a1e1..9adfc38ca7da 100644 --- a/fs/exfat/file.c +++ b/fs/exfat/file.c @@ -51,7 +51,7 @@ static int exfat_cont_expand(struct inode *inode, loff_t size) clu.flags = ei->flags; ret = exfat_alloc_cluster(inode, new_num_clusters - num_clusters, - &clu, IS_DIRSYNC(inode)); + &clu, inode_needs_sync(inode)); if (ret) return ret; @@ -77,12 +77,11 @@ out: ei->i_size_aligned = round_up(size, sb->s_blocksize); ei->i_size_ondisk = ei->i_size_aligned; inode->i_blocks = round_up(size, sbi->cluster_size) >> 9; + mark_inode_dirty(inode); - if (IS_DIRSYNC(inode)) + if (IS_SYNC(inode)) return write_inode_now(inode, 1); - mark_inode_dirty(inode); - return 0; free_clu: -- cgit v1.2.3 From 16934de47da778f0861057df98b08058e0935a5c Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Tue, 26 Mar 2024 21:02:27 +0200 Subject: auxdisplay: linedisp: Group display drivers together For better usability group the display drivers together in Kconfig. With this we will have the following sections: - Character LCD - Samsung KS0108 LCD controller - Single character line display - Character LCD with non-conforming interface Keep Makefile entries sorted alphabetically. While at it, drop redundant 'default n' entries. Tested-by: Geert Uytterhoeven Signed-off-by: Andy Shevchenko --- drivers/auxdisplay/Kconfig | 346 +++++++++++++++++++++++--------------------- drivers/auxdisplay/Makefile | 10 +- 2 files changed, 184 insertions(+), 172 deletions(-) diff --git a/drivers/auxdisplay/Kconfig b/drivers/auxdisplay/Kconfig index 151d95f96b11..69d2138d7efb 100644 --- a/drivers/auxdisplay/Kconfig +++ b/drivers/auxdisplay/Kconfig @@ -16,6 +16,9 @@ menuconfig AUXDISPLAY if AUXDISPLAY +# +# Character LCD section +# config CHARLCD tristate "Character LCD core support" if COMPILE_TEST help @@ -25,12 +28,6 @@ config CHARLCD This is some character LCD core interface that multiple drivers can use. -config LINEDISP - tristate "Character line display core support" if COMPILE_TEST - help - This is the core support for single-line character displays, to be - selected by drivers that use it. - config HD44780_COMMON tristate "Common functions for HD44780 (and compatibles) LCD displays" if COMPILE_TEST select CHARLCD @@ -52,145 +49,6 @@ config HD44780 kernel and started at boot. If you don't understand what all this is about, say N. -config KS0108 - tristate "KS0108 LCD Controller" - depends on PARPORT_PC - default n - help - If you have a LCD controlled by one or more KS0108 - controllers, say Y. You will need also another more specific - driver for your LCD. - - Depends on Parallel Port support. If you say Y at - parport, you will be able to compile this as a module (M) - and built-in as well (Y). - - To compile this as a module, choose M here: - the module will be called ks0108. - - If unsure, say N. - -config KS0108_PORT - hex "Parallel port where the LCD is connected" - depends on KS0108 - default 0x378 - help - The address of the parallel port where the LCD is connected. - - The first standard parallel port address is 0x378. - The second standard parallel port address is 0x278. - The third standard parallel port address is 0x3BC. - - You can specify a different address if you need. - - If you don't know what I'm talking about, load the parport module, - and execute "dmesg" or "cat /proc/ioports". You can see there how - many parallel ports are present and which address each one has. - - Usually you only need to use 0x378. - - If you compile this as a module, you can still override this - using the module parameters. - -config KS0108_DELAY - int "Delay between each control writing (microseconds)" - depends on KS0108 - default "2" - help - Amount of time the ks0108 should wait between each control write - to the parallel port. - - If your LCD seems to miss random writings, increment this. - - If you don't know what I'm talking about, ignore it. - - If you compile this as a module, you can still override this - value using the module parameters. - -config CFAG12864B - tristate "CFAG12864B LCD" - depends on X86 - depends on FB - depends on KS0108 - select FB_SYSMEM_HELPERS - default n - help - If you have a Crystalfontz 128x64 2-color LCD, cfag12864b Series, - say Y. You also need the ks0108 LCD Controller driver. - - For help about how to wire your LCD to the parallel port, - check Documentation/admin-guide/auxdisplay/cfag12864b.rst - - Depends on the x86 arch and the framebuffer support. - - The LCD framebuffer driver can be attached to a console. - It will work fine. However, you can't attach it to the fbdev driver - of the xorg server. - - To compile this as a module, choose M here: - the modules will be called cfag12864b and cfag12864bfb. - - If unsure, say N. - -config CFAG12864B_RATE - int "Refresh rate (hertz)" - depends on CFAG12864B - default "20" - help - Refresh rate of the LCD. - - As the LCD is not memory mapped, the driver has to make the work by - software. This means you should be careful setting this value higher. - If your CPUs are really slow or you feel the system is slowed down, - decrease the value. - - Be careful modifying this value to a very high value: - You can freeze the computer, or the LCD maybe can't draw as fast as you - are requesting. - - If you don't know what I'm talking about, ignore it. - - If you compile this as a module, you can still override this - value using the module parameters. - -config IMG_ASCII_LCD - tristate "Imagination Technologies ASCII LCD Display" - depends on HAS_IOMEM - default y if MIPS_MALTA - select MFD_SYSCON - select LINEDISP - help - Enable this to support the simple ASCII LCD displays found on - development boards such as the MIPS Boston, MIPS Malta & MIPS SEAD3 - from Imagination Technologies. - -config HT16K33 - tristate "Holtek Ht16K33 LED controller with keyscan" - depends on FB && I2C && INPUT - select FB_SYSMEM_HELPERS - select INPUT_MATRIXKMAP - select FB_BACKLIGHT - select NEW_LEDS - select LEDS_CLASS - select LINEDISP - help - Say yes here to add support for Holtek HT16K33, RAM mapping 16*8 - LED controller driver with keyscan. - -config MAX6959 - tristate "Maxim MAX6958/6959 7-segment LED controller" - depends on I2C - select REGMAP_I2C - select LINEDISP - help - If you say yes here you get support for the following Maxim chips - (I2C 7-segment LED display controller): - - MAX6958 - - MAX6959 (input support) - - This driver can also be built as a module. If so, the module - will be called max6959. - config LCD2S tristate "lcd2s 20x4 character display over I2C console" depends on I2C @@ -201,27 +59,6 @@ config LCD2S is a simple single color character display. You have to connect it to an I2C bus. -config ARM_CHARLCD - bool "ARM Ltd. Character LCD Driver" - depends on PLAT_VERSATILE - help - This is a driver for the character LCD found on the ARM Ltd. - Versatile and RealView Platform Baseboards. It doesn't do - very much more than display the text "ARM Linux" on the first - line and the Linux version on the second line, but that's - still useful. - -config SEG_LED_GPIO - tristate "Generic 7-segment LED display" - depends on GPIOLIB || COMPILE_TEST - select LINEDISP - help - This driver supports a generic 7-segment LED display made up - of GPIO pins connected to the individual segments. - - This driver can also be built as a module. If so, the module - will be called seg-led-gpio. - menuconfig PARPORT_PANEL tristate "Parallel port LCD/Keypad Panel support" depends on PARPORT @@ -480,7 +317,6 @@ endif # PARPORT_PANEL config PANEL_CHANGE_MESSAGE bool "Change LCD initialization message ?" depends on CHARLCD - default "n" help This allows you to replace the boot message indicating the kernel version and the driver version with a custom message. This is useful on appliances @@ -529,8 +365,184 @@ choice endchoice +# +# Samsung KS0108 LCD controller section +# +config KS0108 + tristate "KS0108 LCD Controller" + depends on PARPORT_PC + help + If you have a LCD controlled by one or more KS0108 + controllers, say Y. You will need also another more specific + driver for your LCD. + + Depends on Parallel Port support. If you say Y at + parport, you will be able to compile this as a module (M) + and built-in as well (Y). + + To compile this as a module, choose M here: + the module will be called ks0108. + + If unsure, say N. + +config KS0108_PORT + hex "Parallel port where the LCD is connected" + depends on KS0108 + default 0x378 + help + The address of the parallel port where the LCD is connected. + + The first standard parallel port address is 0x378. + The second standard parallel port address is 0x278. + The third standard parallel port address is 0x3BC. + + You can specify a different address if you need. + + If you don't know what I'm talking about, load the parport module, + and execute "dmesg" or "cat /proc/ioports". You can see there how + many parallel ports are present and which address each one has. + + Usually you only need to use 0x378. + + If you compile this as a module, you can still override this + using the module parameters. + +config KS0108_DELAY + int "Delay between each control writing (microseconds)" + depends on KS0108 + default "2" + help + Amount of time the ks0108 should wait between each control write + to the parallel port. + + If your LCD seems to miss random writings, increment this. + + If you don't know what I'm talking about, ignore it. + + If you compile this as a module, you can still override this + value using the module parameters. + +config CFAG12864B + tristate "CFAG12864B LCD" + depends on X86 + depends on FB + depends on KS0108 + select FB_SYSMEM_HELPERS + help + If you have a Crystalfontz 128x64 2-color LCD, cfag12864b Series, + say Y. You also need the ks0108 LCD Controller driver. + + For help about how to wire your LCD to the parallel port, + check Documentation/admin-guide/auxdisplay/cfag12864b.rst + + Depends on the x86 arch and the framebuffer support. + + The LCD framebuffer driver can be attached to a console. + It will work fine. However, you can't attach it to the fbdev driver + of the xorg server. + + To compile this as a module, choose M here: + the modules will be called cfag12864b and cfag12864bfb. + + If unsure, say N. + +config CFAG12864B_RATE + int "Refresh rate (hertz)" + depends on CFAG12864B + default "20" + help + Refresh rate of the LCD. + + As the LCD is not memory mapped, the driver has to make the work by + software. This means you should be careful setting this value higher. + If your CPUs are really slow or you feel the system is slowed down, + decrease the value. + + Be careful modifying this value to a very high value: + You can freeze the computer, or the LCD maybe can't draw as fast as you + are requesting. + + If you don't know what I'm talking about, ignore it. + + If you compile this as a module, you can still override this + value using the module parameters. + +# +# Single character line display section +# +config LINEDISP + tristate "Character line display core support" if COMPILE_TEST + help + This is the core support for single-line character displays, to be + selected by drivers that use it. + +config IMG_ASCII_LCD + tristate "Imagination Technologies ASCII LCD Display" + depends on HAS_IOMEM + default y if MIPS_MALTA + select MFD_SYSCON + select LINEDISP + help + Enable this to support the simple ASCII LCD displays found on + development boards such as the MIPS Boston, MIPS Malta & MIPS SEAD3 + from Imagination Technologies. + +config HT16K33 + tristate "Holtek Ht16K33 LED controller with keyscan" + depends on FB && I2C && INPUT + select FB_SYSMEM_HELPERS + select INPUT_MATRIXKMAP + select FB_BACKLIGHT + select NEW_LEDS + select LEDS_CLASS + select LINEDISP + help + Say yes here to add support for Holtek HT16K33, RAM mapping 16*8 + LED controller driver with keyscan. + +config MAX6959 + tristate "Maxim MAX6958/6959 7-segment LED controller" + depends on I2C + select REGMAP_I2C + select LINEDISP + help + If you say yes here you get support for the following Maxim chips + (I2C 7-segment LED display controller): + - MAX6958 + - MAX6959 (input support) + + This driver can also be built as a module. If so, the module + will be called max6959. + +config SEG_LED_GPIO + tristate "Generic 7-segment LED display" + depends on GPIOLIB || COMPILE_TEST + select LINEDISP + help + This driver supports a generic 7-segment LED display made up + of GPIO pins connected to the individual segments. + + This driver can also be built as a module. If so, the module + will be called seg-led-gpio. + +# +# Character LCD with non-conforming interface section +# +config ARM_CHARLCD + bool "ARM Ltd. Character LCD Driver" + depends on PLAT_VERSATILE + help + This is a driver for the character LCD found on the ARM Ltd. + Versatile and RealView Platform Baseboards. It doesn't do + very much more than display the text "ARM Linux" on the first + line and the Linux version on the second line, but that's + still useful. + endif # AUXDISPLAY +# +# Deprecated options +# config PANEL tristate "Parallel port LCD/Keypad Panel support (OLD OPTION)" depends on PARPORT diff --git a/drivers/auxdisplay/Makefile b/drivers/auxdisplay/Makefile index 4a8ea41b0550..f5c13ed1cd4f 100644 --- a/drivers/auxdisplay/Makefile +++ b/drivers/auxdisplay/Makefile @@ -3,16 +3,16 @@ # Makefile for the kernel auxiliary displays device drivers. # -obj-$(CONFIG_CHARLCD) += charlcd.o -obj-$(CONFIG_HD44780_COMMON) += hd44780_common.o obj-$(CONFIG_ARM_CHARLCD) += arm-charlcd.o -obj-$(CONFIG_KS0108) += ks0108.o obj-$(CONFIG_CFAG12864B) += cfag12864b.o cfag12864bfb.o -obj-$(CONFIG_IMG_ASCII_LCD) += img-ascii-lcd.o +obj-$(CONFIG_CHARLCD) += charlcd.o +obj-$(CONFIG_HD44780_COMMON) += hd44780_common.o obj-$(CONFIG_HD44780) += hd44780.o obj-$(CONFIG_HT16K33) += ht16k33.o -obj-$(CONFIG_PARPORT_PANEL) += panel.o +obj-$(CONFIG_IMG_ASCII_LCD) += img-ascii-lcd.o +obj-$(CONFIG_KS0108) += ks0108.o obj-$(CONFIG_LCD2S) += lcd2s.o obj-$(CONFIG_LINEDISP) += line-display.o obj-$(CONFIG_MAX6959) += max6959.o +obj-$(CONFIG_PARPORT_PANEL) += panel.o obj-$(CONFIG_SEG_LED_GPIO) += seg-led-gpio.o -- cgit v1.2.3 From 0e60f0b75884677fb9f4f2ad40d52b43451564d5 Mon Sep 17 00:00:00 2001 From: Max Filippov Date: Sat, 17 Feb 2024 05:15:42 -0800 Subject: xtensa: fix MAKE_PC_FROM_RA second argument Xtensa has two-argument MAKE_PC_FROM_RA macro to convert a0 to an actual return address because when windowed ABI is used call{,x}{4,8,12} opcodes stuff encoded window size into the top 2 bits of the register that becomes a return address in the called function. Second argument of that macro is supposed to be an address having these 2 topmost bits set correctly, but the comment suggested that that could be the stack address. However the stack doesn't have to be in the same 1GByte region as the code, especially in noMMU XIP configurations. Fix the comment and use either _text or regs->pc as the second argument for the MAKE_PC_FROM_RA macro. Cc: stable@vger.kernel.org Signed-off-by: Max Filippov --- arch/xtensa/include/asm/processor.h | 8 ++++---- arch/xtensa/include/asm/ptrace.h | 2 +- arch/xtensa/kernel/process.c | 5 +++-- arch/xtensa/kernel/stacktrace.c | 3 ++- 4 files changed, 10 insertions(+), 8 deletions(-) diff --git a/arch/xtensa/include/asm/processor.h b/arch/xtensa/include/asm/processor.h index d008a153a2b9..7ed1a2085bd7 100644 --- a/arch/xtensa/include/asm/processor.h +++ b/arch/xtensa/include/asm/processor.h @@ -115,9 +115,9 @@ #define MAKE_RA_FOR_CALL(ra,ws) (((ra) & 0x3fffffff) | (ws) << 30) /* Convert return address to a valid pc - * Note: We assume that the stack pointer is in the same 1GB ranges as the ra + * Note: 'text' is the address within the same 1GB range as the ra */ -#define MAKE_PC_FROM_RA(ra,sp) (((ra) & 0x3fffffff) | ((sp) & 0xc0000000)) +#define MAKE_PC_FROM_RA(ra, text) (((ra) & 0x3fffffff) | ((unsigned long)(text) & 0xc0000000)) #elif defined(__XTENSA_CALL0_ABI__) @@ -127,9 +127,9 @@ #define MAKE_RA_FOR_CALL(ra, ws) (ra) /* Convert return address to a valid pc - * Note: We assume that the stack pointer is in the same 1GB ranges as the ra + * Note: 'text' is not used as 'ra' is always the full address */ -#define MAKE_PC_FROM_RA(ra, sp) (ra) +#define MAKE_PC_FROM_RA(ra, text) (ra) #else #error Unsupported Xtensa ABI diff --git a/arch/xtensa/include/asm/ptrace.h b/arch/xtensa/include/asm/ptrace.h index a270467556dc..86c70117371b 100644 --- a/arch/xtensa/include/asm/ptrace.h +++ b/arch/xtensa/include/asm/ptrace.h @@ -87,7 +87,7 @@ struct pt_regs { # define user_mode(regs) (((regs)->ps & 0x00000020)!=0) # define instruction_pointer(regs) ((regs)->pc) # define return_pointer(regs) (MAKE_PC_FROM_RA((regs)->areg[0], \ - (regs)->areg[1])) + (regs)->pc)) # ifndef CONFIG_SMP # define profile_pc(regs) instruction_pointer(regs) diff --git a/arch/xtensa/kernel/process.c b/arch/xtensa/kernel/process.c index a815577d25fd..7bd66677f7b6 100644 --- a/arch/xtensa/kernel/process.c +++ b/arch/xtensa/kernel/process.c @@ -47,6 +47,7 @@ #include #include #include +#include #include extern void ret_from_fork(void); @@ -380,7 +381,7 @@ unsigned long __get_wchan(struct task_struct *p) int count = 0; sp = p->thread.sp; - pc = MAKE_PC_FROM_RA(p->thread.ra, p->thread.sp); + pc = MAKE_PC_FROM_RA(p->thread.ra, _text); do { if (sp < stack_page + sizeof(struct task_struct) || @@ -392,7 +393,7 @@ unsigned long __get_wchan(struct task_struct *p) /* Stack layout: sp-4: ra, sp-3: sp' */ - pc = MAKE_PC_FROM_RA(SPILL_SLOT(sp, 0), sp); + pc = MAKE_PC_FROM_RA(SPILL_SLOT(sp, 0), _text); sp = SPILL_SLOT(sp, 1); } while (count++ < 16); return 0; diff --git a/arch/xtensa/kernel/stacktrace.c b/arch/xtensa/kernel/stacktrace.c index 831ffb648bda..ed324fdf2a2f 100644 --- a/arch/xtensa/kernel/stacktrace.c +++ b/arch/xtensa/kernel/stacktrace.c @@ -13,6 +13,7 @@ #include #include +#include #include #include #include @@ -189,7 +190,7 @@ void walk_stackframe(unsigned long *sp, if (a1 <= (unsigned long)sp) break; - frame.pc = MAKE_PC_FROM_RA(a0, a1); + frame.pc = MAKE_PC_FROM_RA(a0, _text); frame.sp = a1; if (fn(&frame, data)) -- cgit v1.2.3 From 6677196fb1932e60b88ad0794a7ae532df178654 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 25 Mar 2024 09:58:35 +0100 Subject: clk: qcom: gdsc: treat optional supplies as optional Since commit deebc79b28d6 ("clk: qcom: gpucc-sc8280xp: Add external supply for GX gdsc") the GDSC supply must be treated as optional to avoid warnings like: gpu_cc-sc8280xp 3d90000.clock-controller: supply vdd-gfx not found, using dummy regulator on SC8280XP. Fortunately, the driver is already prepared to handle this by checking that the regulator pointer is non-NULL before use. This also avoids triggering a potential deadlock on SC8280XP even if the underlying issue still remains for the derivative platforms like SA8295P that actually use the supply. Fixes: deebc79b28d6 ("clk: qcom: gpucc-sc8280xp: Add external supply for GX gdsc") Link: https://lore.kernel.org/lkml/Zf25Sv2x9WaCFuIH@hovoldconsulting.com/ Signed-off-by: Johan Hovold Reviewed-by: Bjorn Andersson Link: https://lore.kernel.org/r/20240325085835.26158-1-johan+linaro@kernel.org Signed-off-by: Bjorn Andersson --- drivers/clk/qcom/gdsc.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) diff --git a/drivers/clk/qcom/gdsc.c b/drivers/clk/qcom/gdsc.c index e7a4068b9f39..df9618ab7eea 100644 --- a/drivers/clk/qcom/gdsc.c +++ b/drivers/clk/qcom/gdsc.c @@ -487,9 +487,14 @@ int gdsc_register(struct gdsc_desc *desc, if (!scs[i] || !scs[i]->supply) continue; - scs[i]->rsupply = devm_regulator_get(dev, scs[i]->supply); - if (IS_ERR(scs[i]->rsupply)) - return PTR_ERR(scs[i]->rsupply); + scs[i]->rsupply = devm_regulator_get_optional(dev, scs[i]->supply); + if (IS_ERR(scs[i]->rsupply)) { + ret = PTR_ERR(scs[i]->rsupply); + if (ret != -ENODEV) + return ret; + + scs[i]->rsupply = NULL; + } } data->num_domains = num; -- cgit v1.2.3 From 0d4ce2458cd7d1d66a5ee2f3c036592fb663d5bc Mon Sep 17 00:00:00 2001 From: Adam Skladowski Date: Mon, 1 Apr 2024 19:16:39 +0200 Subject: clk: qcom: smd-rpm: Restore msm8976 num_clk During rework somehow msm8976 num_clk got removed, restore it. Fixes: d6edc31f3a68 ("clk: qcom: smd-rpm: Separate out interconnect bus clocks") Signed-off-by: Adam Skladowski Reviewed-by: Konrad Dybcio Link: https://lore.kernel.org/r/20240401171641.8979-1-a39.skl@gmail.com Signed-off-by: Bjorn Andersson --- drivers/clk/qcom/clk-smd-rpm.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/clk/qcom/clk-smd-rpm.c b/drivers/clk/qcom/clk-smd-rpm.c index 8602c02047d0..45c5255bcd11 100644 --- a/drivers/clk/qcom/clk-smd-rpm.c +++ b/drivers/clk/qcom/clk-smd-rpm.c @@ -768,6 +768,7 @@ static struct clk_smd_rpm *msm8976_clks[] = { static const struct rpm_smd_clk_desc rpm_clk_msm8976 = { .clks = msm8976_clks, + .num_clks = ARRAY_SIZE(msm8976_clks), .icc_clks = bimc_pcnoc_snoc_smmnoc_icc_clks, .num_icc_clks = ARRAY_SIZE(bimc_pcnoc_snoc_smmnoc_icc_clks), }; -- cgit v1.2.3 From 11cca8ccf2c3643d002e7b421acfdc847a627e9f Mon Sep 17 00:00:00 2001 From: Thorsten Blum Date: Thu, 4 Apr 2024 09:58:13 +0200 Subject: tty: xtensa/iss: Use min() to fix Coccinelle warning Inline strlen() and use min() to fix the following Coccinelle/coccicheck warning reported by minmax.cocci: WARNING opportunity for min() Signed-off-by: Thorsten Blum Message-Id: <20240404075811.6936-3-thorsten.blum@toblux.com> Reviewed-by: Jiri Slaby Signed-off-by: Max Filippov --- arch/xtensa/platforms/iss/console.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/arch/xtensa/platforms/iss/console.c b/arch/xtensa/platforms/iss/console.c index 8896e691c051..abec44b687df 100644 --- a/arch/xtensa/platforms/iss/console.c +++ b/arch/xtensa/platforms/iss/console.c @@ -166,10 +166,8 @@ late_initcall(rs_init); static void iss_console_write(struct console *co, const char *s, unsigned count) { - if (s && *s != 0) { - int len = strlen(s); - simc_write(1, s, count < len ? count : len); - } + if (s && *s != 0) + simc_write(1, s, min(count, strlen(s))); } static struct tty_driver* iss_console_device(struct console *c, int *index) -- cgit v1.2.3 From 74a72baf204fd509bbe8b53eec35e39869d94341 Mon Sep 17 00:00:00 2001 From: Ramona Gradinariu Date: Fri, 5 Apr 2024 07:53:09 +0300 Subject: iio:imu: adis16475: Fix sync mode setting Fix sync mode setting by applying the necessary shift bits. Fixes: fff7352bf7a3 ("iio: imu: Add support for adis16475") Signed-off-by: Ramona Gradinariu Reviewed-by: Nuno Sa Link: https://lore.kernel.org/r/20240405045309.816328-2-ramona.bolboaca13@gmail.com Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/imu/adis16475.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/iio/imu/adis16475.c b/drivers/iio/imu/adis16475.c index 01f55cc902fa..060a21c70460 100644 --- a/drivers/iio/imu/adis16475.c +++ b/drivers/iio/imu/adis16475.c @@ -1289,6 +1289,7 @@ static int adis16475_config_sync_mode(struct adis16475 *st) struct device *dev = &st->adis.spi->dev; const struct adis16475_sync *sync; u32 sync_mode; + u16 val; /* default to internal clk */ st->clk_freq = st->info->int_clk * 1000; @@ -1350,8 +1351,9 @@ static int adis16475_config_sync_mode(struct adis16475 *st) * I'm keeping this for simplicity and avoiding extra variables * in chip_info. */ + val = ADIS16475_SYNC_MODE(sync->sync_mode); ret = __adis_update_bits(&st->adis, ADIS16475_REG_MSG_CTRL, - ADIS16475_SYNC_MODE_MASK, sync->sync_mode); + ADIS16475_SYNC_MODE_MASK, val); if (ret) return ret; -- cgit v1.2.3 From 7a1625c1711b526a77cb9c3acc15dbba71896a40 Mon Sep 17 00:00:00 2001 From: Cezary Rojewski Date: Mon, 8 Apr 2024 10:18:40 +0200 Subject: ASoC: Intel: avs: Fix debug window description Recent changes addressed PAGE_SIZE ambiguity in 2/3 locations for struct avs_icl_memwnd2. The unaddressed one causes build errors when PAGE_SIZE != SZ_4K. Reported-by: kernel test robot Closes: https://lore.kernel.org/oe-kbuild-all/202404070100.i3t3Jf7d-lkp@intel.com/ Fixes: 275b583d047a ("ASoC: Intel: avs: ICL-based platforms support") Signed-off-by: Cezary Rojewski Link: https://msgid.link/r/20240408081840.1319431-1-cezary.rojewski@intel.com Signed-off-by: Mark Brown --- sound/soc/intel/avs/icl.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/intel/avs/icl.c b/sound/soc/intel/avs/icl.c index 9d9921e1cd4d..d2554c857732 100644 --- a/sound/soc/intel/avs/icl.c +++ b/sound/soc/intel/avs/icl.c @@ -64,7 +64,7 @@ struct avs_icl_memwnd2_desc { struct avs_icl_memwnd2 { union { struct avs_icl_memwnd2_desc slot_desc[AVS_ICL_MEMWND2_SLOTS_COUNT]; - u8 rsvd[PAGE_SIZE]; + u8 rsvd[SZ_4K]; }; u8 slot_array[AVS_ICL_MEMWND2_SLOTS_COUNT][PAGE_SIZE]; } __packed; -- cgit v1.2.3 From 2e93a29b48a017c777d4fcbfcc51aba4e6a90d38 Mon Sep 17 00:00:00 2001 From: Sameer Pujar Date: Fri, 5 Apr 2024 10:43:06 +0000 Subject: ASoC: tegra: Fix DSPK 16-bit playback DSPK configuration is wrong for 16-bit playback and this happens because the client config is always fixed at 24-bit in hw_params(). Fix this by updating the client config to 16-bit for the respective playback. Fixes: 327ef6470266 ("ASoC: tegra: Add Tegra186 based DSPK driver") Cc: stable@vger.kernel.org Signed-off-by: Sameer Pujar Acked-by: Thierry Reding Link: https://msgid.link/r/20240405104306.551036-1-spujar@nvidia.com Signed-off-by: Mark Brown --- sound/soc/tegra/tegra186_dspk.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/sound/soc/tegra/tegra186_dspk.c b/sound/soc/tegra/tegra186_dspk.c index aa37c4ab0adb..21cd41fec7a9 100644 --- a/sound/soc/tegra/tegra186_dspk.c +++ b/sound/soc/tegra/tegra186_dspk.c @@ -1,8 +1,7 @@ // SPDX-License-Identifier: GPL-2.0-only +// SPDX-FileCopyrightText: Copyright (c) 2020-2024 NVIDIA CORPORATION & AFFILIATES. All rights reserved. // // tegra186_dspk.c - Tegra186 DSPK driver -// -// Copyright (c) 2020 NVIDIA CORPORATION. All rights reserved. #include #include @@ -241,14 +240,14 @@ static int tegra186_dspk_hw_params(struct snd_pcm_substream *substream, return -EINVAL; } - cif_conf.client_bits = TEGRA_ACIF_BITS_24; - switch (params_format(params)) { case SNDRV_PCM_FORMAT_S16_LE: cif_conf.audio_bits = TEGRA_ACIF_BITS_16; + cif_conf.client_bits = TEGRA_ACIF_BITS_16; break; case SNDRV_PCM_FORMAT_S32_LE: cif_conf.audio_bits = TEGRA_ACIF_BITS_32; + cif_conf.client_bits = TEGRA_ACIF_BITS_24; break; default: dev_err(dev, "unsupported format!\n"); -- cgit v1.2.3 From e50729d742ec364895f1c389c32315984a987aa5 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sun, 7 Apr 2024 21:15:59 +0200 Subject: ASoC: Intel: bytcr_rt5640: Apply Asus T100TA quirk to Asus T100TAM too The Asus T100TA quirk has been using an exact match on a product-name of "T100TA" but there are also T100TAM variants with a slightly higher clocked CPU and a metal backside which need the same quirk. Sort the existing T100TA (stereo speakers) below the more specific T100TAF (mono speaker) quirk and switch from exact matching to substring matching so that the T100TA quirk will also match on the T100TAM models. Signed-off-by: Hans de Goede Link: https://msgid.link/r/20240407191559.21596-1-hdegoede@redhat.com Signed-off-by: Mark Brown --- sound/soc/intel/boards/bytcr_rt5640.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) diff --git a/sound/soc/intel/boards/bytcr_rt5640.c b/sound/soc/intel/boards/bytcr_rt5640.c index 05f38d1f7d82..b41a1147f1c3 100644 --- a/sound/soc/intel/boards/bytcr_rt5640.c +++ b/sound/soc/intel/boards/bytcr_rt5640.c @@ -636,28 +636,30 @@ static const struct dmi_system_id byt_rt5640_quirk_table[] = { BYT_RT5640_USE_AMCR0F28), }, { + /* Asus T100TAF, unlike other T100TA* models this one has a mono speaker */ .matches = { DMI_EXACT_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."), - DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "T100TA"), + DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "T100TAF"), }, .driver_data = (void *)(BYT_RT5640_IN1_MAP | BYT_RT5640_JD_SRC_JD2_IN4N | BYT_RT5640_OVCD_TH_2000UA | BYT_RT5640_OVCD_SF_0P75 | + BYT_RT5640_MONO_SPEAKER | + BYT_RT5640_DIFF_MIC | + BYT_RT5640_SSP0_AIF2 | BYT_RT5640_MCLK_EN), }, { + /* Asus T100TA and T100TAM, must come after T100TAF (mono spk) match */ .matches = { - DMI_EXACT_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."), - DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "T100TAF"), + DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."), + DMI_MATCH(DMI_PRODUCT_NAME, "T100TA"), }, .driver_data = (void *)(BYT_RT5640_IN1_MAP | BYT_RT5640_JD_SRC_JD2_IN4N | BYT_RT5640_OVCD_TH_2000UA | BYT_RT5640_OVCD_SF_0P75 | - BYT_RT5640_MONO_SPEAKER | - BYT_RT5640_DIFF_MIC | - BYT_RT5640_SSP0_AIF2 | BYT_RT5640_MCLK_EN), }, { -- cgit v1.2.3 From 70ee853eec5693fefd8348a2b049d9cb83362e58 Mon Sep 17 00:00:00 2001 From: Richard Fitzgerald Date: Mon, 8 Apr 2024 11:18:00 +0100 Subject: regmap: Add regmap_read_bypassed() Add a regmap_read_bypassed() to allow reads from the hardware registers while the regmap is in cache-only mode. A typical use for this is to keep the cache in cache-only mode until the hardware has reached a valid state, but one or more status registers must be polled to determine when this state is reached. For example, firmware download on the cs35l56 can take several seconds if there are multiple amps sharing limited bus bandwidth. This is too long to block in probe() so it is done as a background task. The device must be soft-reset to reboot the firmware and during this time the registers are not accessible, so the cache should be in cache-only. But the driver must poll a register to detect when reboot has completed. Signed-off-by: Richard Fitzgerald Fixes: 8a731fd37f8b ("ASoC: cs35l56: Move utility functions to shared file") Link: https://msgid.link/r/20240408101803.43183-2-rf@opensource.cirrus.com Signed-off-by: Mark Brown --- drivers/base/regmap/regmap.c | 37 +++++++++++++++++++++++++++++++++++++ include/linux/regmap.h | 8 ++++++++ 2 files changed, 45 insertions(+) diff --git a/drivers/base/regmap/regmap.c b/drivers/base/regmap/regmap.c index 5cb425f6f02d..0a34dd3c4f38 100644 --- a/drivers/base/regmap/regmap.c +++ b/drivers/base/regmap/regmap.c @@ -2838,6 +2838,43 @@ int regmap_read(struct regmap *map, unsigned int reg, unsigned int *val) } EXPORT_SYMBOL_GPL(regmap_read); +/** + * regmap_read_bypassed() - Read a value from a single register direct + * from the device, bypassing the cache + * + * @map: Register map to read from + * @reg: Register to be read from + * @val: Pointer to store read value + * + * A value of zero will be returned on success, a negative errno will + * be returned in error cases. + */ +int regmap_read_bypassed(struct regmap *map, unsigned int reg, unsigned int *val) +{ + int ret; + bool bypass, cache_only; + + if (!IS_ALIGNED(reg, map->reg_stride)) + return -EINVAL; + + map->lock(map->lock_arg); + + bypass = map->cache_bypass; + cache_only = map->cache_only; + map->cache_bypass = true; + map->cache_only = false; + + ret = _regmap_read(map, reg, val); + + map->cache_bypass = bypass; + map->cache_only = cache_only; + + map->unlock(map->lock_arg); + + return ret; +} +EXPORT_SYMBOL_GPL(regmap_read_bypassed); + /** * regmap_raw_read() - Read raw data from the device * diff --git a/include/linux/regmap.h b/include/linux/regmap.h index b743241cfb7c..d470303b1bbb 100644 --- a/include/linux/regmap.h +++ b/include/linux/regmap.h @@ -1230,6 +1230,7 @@ int regmap_multi_reg_write_bypassed(struct regmap *map, int regmap_raw_write_async(struct regmap *map, unsigned int reg, const void *val, size_t val_len); int regmap_read(struct regmap *map, unsigned int reg, unsigned int *val); +int regmap_read_bypassed(struct regmap *map, unsigned int reg, unsigned int *val); int regmap_raw_read(struct regmap *map, unsigned int reg, void *val, size_t val_len); int regmap_noinc_read(struct regmap *map, unsigned int reg, @@ -1739,6 +1740,13 @@ static inline int regmap_read(struct regmap *map, unsigned int reg, return -EINVAL; } +static inline int regmap_read_bypassed(struct regmap *map, unsigned int reg, + unsigned int *val) +{ + WARN_ONCE(1, "regmap API is disabled"); + return -EINVAL; +} + static inline int regmap_raw_read(struct regmap *map, unsigned int reg, void *val, size_t val_len) { -- cgit v1.2.3 From 73580ec607dfe125b140ed30c7c0a074db78c558 Mon Sep 17 00:00:00 2001 From: Richard Fitzgerald Date: Mon, 8 Apr 2024 11:18:01 +0100 Subject: ALSA: hda: cs35l56: Exit cache-only after cs35l56_wait_for_firmware_boot() Adds calls to disable regmap cache-only after a successful return from cs35l56_wait_for_firmware_boot(). This is to prepare for a change in the shared ASoC module that will leave regmap in cache-only mode after cs35l56_system_reset(). This is to prevent register accesses going to the hardware while it is rebooting. Signed-off-by: Richard Fitzgerald Link: https://msgid.link/r/20240408101803.43183-3-rf@opensource.cirrus.com Signed-off-by: Mark Brown --- sound/pci/hda/cs35l56_hda.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/sound/pci/hda/cs35l56_hda.c b/sound/pci/hda/cs35l56_hda.c index 1a3f84599cb5..558c1f38fe97 100644 --- a/sound/pci/hda/cs35l56_hda.c +++ b/sound/pci/hda/cs35l56_hda.c @@ -644,6 +644,8 @@ static int cs35l56_hda_fw_load(struct cs35l56_hda *cs35l56) ret = cs35l56_wait_for_firmware_boot(&cs35l56->base); if (ret) goto err_powered_up; + + regcache_cache_only(cs35l56->base.regmap, false); } /* Disable auto-hibernate so that runtime_pm has control */ @@ -1002,6 +1004,8 @@ int cs35l56_hda_common_probe(struct cs35l56_hda *cs35l56, int hid, int id) if (ret) goto err; + regcache_cache_only(cs35l56->base.regmap, false); + ret = cs35l56_set_patch(&cs35l56->base); if (ret) goto err; -- cgit v1.2.3 From d4884fd48a44f3d7f0d4d7399b663b69c000233d Mon Sep 17 00:00:00 2001 From: Richard Fitzgerald Date: Mon, 8 Apr 2024 11:18:02 +0100 Subject: ASoC: cs35l56: Fix unintended bus access while resetting amp Use the new regmap_read_bypassed() so that the regmap can be left in cache-only mode while it is booting, but the driver can still read boot-status and chip-id information during this time. This fixes race conditions where some writes could be issued to the silicon while it is still rebooting, before the driver has determined that the boot is complete. This is typically prevented by putting regmap into cache-only until the hardware is ready. But this assumes that the driver does not need to access device registers to determine when it is "ready". For cs35l56 this involves polling a register and the original implementation relied on having special handlers to block racing callbacks until dsp_work() is complete. However, some cases were missed, most notably the ASP DAI functions. The regmap_read_bypassed() function allows the fix for this to be simplified to putting regmap into cache-only during the reset. The initial boot stages (poll HALO_STATE and read the chip ID) are all done bypassed. Only when the amp is seen to be booted is the cache-only revoked. Changes are: - cs35l56_system_reset() now leaves the regmap in cache-only status. - cs35l56_wait_for_firmware_boot() polls using regmap_read_bypassed(). - cs35l56_init() revokes cache-only either via cs35l56_hw_init() or when firmware has rebooted after a soft reset. - cs35l56_hw_init() exits cache-only after it has determined that the amp has booted. - cs35l56_sdw_init() doesn't disable cache-only, since this must be deferred to cs35l56_init(). - cs35l56_runtime_resume_common() waits for firmware boot before exiting cache-only. These changes cover three situations where the registers are not accessible: 1) SoundWire first-time enumeration. The regmap is kept in cache-only until the chip is fully booted. The original code had to exit cache-only to read chip status in cs35l56_init() and cs35l56_hw_init() but this is now deferred to after the firmware has rebooted. In this case cs35l56_sdw_probe() leaves regmap in cache-only (unchanged behaviour) and cs35l56_hw_init() exits cache-only after the firmware is booted and the chip identified. 2) Soft reset during first-time initialization. cs35l56_init() calls cs35l56_system_reset(), which puts regmap into cache-only. On I2C/SPI cs35l56_init() then flows through to call cs35l56_wait_for_firmware_boot() and exit cache-only. On SoundWire the re-enumeration will enter cs35l56_init() again, which then drops down to call cs35l56_wait_for_firmware_boot() and exit cache-only. 3) Soft reset after firmware download. dsp_work() calls cs35l56_system_reset(), which puts regmap into cache-only. After this the flow is the same as (2). Signed-off-by: Richard Fitzgerald Fixes: 8a731fd37f8b ("ASoC: cs35l56: Move utility functions to shared file") Link: https://msgid.link/r/20240408101803.43183-4-rf@opensource.cirrus.com Signed-off-by: Mark Brown --- sound/soc/codecs/cs35l56-sdw.c | 2 -- sound/soc/codecs/cs35l56-shared.c | 20 ++++++++++++-------- sound/soc/codecs/cs35l56.c | 2 ++ 3 files changed, 14 insertions(+), 10 deletions(-) diff --git a/sound/soc/codecs/cs35l56-sdw.c b/sound/soc/codecs/cs35l56-sdw.c index 14a5f86019aa..70ff55c1517f 100644 --- a/sound/soc/codecs/cs35l56-sdw.c +++ b/sound/soc/codecs/cs35l56-sdw.c @@ -188,8 +188,6 @@ static void cs35l56_sdw_init(struct sdw_slave *peripheral) goto out; } - regcache_cache_only(cs35l56->base.regmap, false); - ret = cs35l56_init(cs35l56); if (ret < 0) { regcache_cache_only(cs35l56->base.regmap, true); diff --git a/sound/soc/codecs/cs35l56-shared.c b/sound/soc/codecs/cs35l56-shared.c index 08cac58e3ab2..a83317db75ed 100644 --- a/sound/soc/codecs/cs35l56-shared.c +++ b/sound/soc/codecs/cs35l56-shared.c @@ -307,10 +307,10 @@ int cs35l56_wait_for_firmware_boot(struct cs35l56_base *cs35l56_base) reg = CS35L56_DSP1_HALO_STATE; /* - * This can't be a regmap_read_poll_timeout() because cs35l56 will NAK - * I2C until it has booted which would terminate the poll + * The regmap must remain in cache-only until the chip has + * booted, so use a bypassed read of the status register. */ - poll_ret = read_poll_timeout(regmap_read, read_ret, + poll_ret = read_poll_timeout(regmap_read_bypassed, read_ret, (val < 0xFFFF) && (val >= CS35L56_HALO_STATE_BOOT_DONE), CS35L56_HALO_STATE_POLL_US, CS35L56_HALO_STATE_TIMEOUT_US, @@ -362,7 +362,8 @@ void cs35l56_system_reset(struct cs35l56_base *cs35l56_base, bool is_soundwire) return; cs35l56_wait_control_port_ready(); - regcache_cache_only(cs35l56_base->regmap, false); + + /* Leave in cache-only. This will be revoked when the chip has rebooted. */ } EXPORT_SYMBOL_NS_GPL(cs35l56_system_reset, SND_SOC_CS35L56_SHARED); @@ -577,14 +578,14 @@ int cs35l56_runtime_resume_common(struct cs35l56_base *cs35l56_base, bool is_sou cs35l56_issue_wake_event(cs35l56_base); out_sync: - regcache_cache_only(cs35l56_base->regmap, false); - ret = cs35l56_wait_for_firmware_boot(cs35l56_base); if (ret) { dev_err(cs35l56_base->dev, "Hibernate wake failed: %d\n", ret); goto err; } + regcache_cache_only(cs35l56_base->regmap, false); + ret = cs35l56_mbox_send(cs35l56_base, CS35L56_MBOX_CMD_PREVENT_AUTO_HIBERNATE); if (ret) goto err; @@ -757,7 +758,7 @@ int cs35l56_hw_init(struct cs35l56_base *cs35l56_base) * devices so the REVID needs to be determined before waiting for the * firmware to boot. */ - ret = regmap_read(cs35l56_base->regmap, CS35L56_REVID, &revid); + ret = regmap_read_bypassed(cs35l56_base->regmap, CS35L56_REVID, &revid); if (ret < 0) { dev_err(cs35l56_base->dev, "Get Revision ID failed\n"); return ret; @@ -768,7 +769,7 @@ int cs35l56_hw_init(struct cs35l56_base *cs35l56_base) if (ret) return ret; - ret = regmap_read(cs35l56_base->regmap, CS35L56_DEVID, &devid); + ret = regmap_read_bypassed(cs35l56_base->regmap, CS35L56_DEVID, &devid); if (ret < 0) { dev_err(cs35l56_base->dev, "Get Device ID failed\n"); return ret; @@ -787,6 +788,9 @@ int cs35l56_hw_init(struct cs35l56_base *cs35l56_base) cs35l56_base->type = devid & 0xFF; + /* Silicon is now identified and booted so exit cache-only */ + regcache_cache_only(cs35l56_base->regmap, false); + ret = regmap_read(cs35l56_base->regmap, CS35L56_DSP_RESTRICT_STS1, &secured); if (ret) { dev_err(cs35l56_base->dev, "Get Secure status failed\n"); diff --git a/sound/soc/codecs/cs35l56.c b/sound/soc/codecs/cs35l56.c index 8d2f021fb362..5a4e0e479414 100644 --- a/sound/soc/codecs/cs35l56.c +++ b/sound/soc/codecs/cs35l56.c @@ -1531,6 +1531,8 @@ post_soft_reset: return ret; dev_dbg(cs35l56->base.dev, "Firmware rebooted after soft reset\n"); + + regcache_cache_only(cs35l56->base.regmap, false); } /* Disable auto-hibernate so that runtime_pm has control */ -- cgit v1.2.3 From dfd2ffb373999630a14d7ff614440f1c2fcc704c Mon Sep 17 00:00:00 2001 From: Richard Fitzgerald Date: Mon, 8 Apr 2024 11:18:03 +0100 Subject: ASoC: cs35l56: Prevent overwriting firmware ASP config Only populate the ASP1 config registers in the regmap cache if the ASP DAI is used. This prevents regcache_sync() from overwriting these registers with their defaults when the firmware owns control of these registers. On a SoundWire system the ASP could be owned by the firmware to share reference audio with the firmware on other cs35l56. Or it can be used as a normal codec-codec interface owned by the driver. The driver must not overwrite the registers if the firmware has control of them. The original implementation for this in commit 07f7d6e7a124 ("ASoC: cs35l56: Fix for initializing ASP1 mixer registers") was to still provide defaults for these registers, assuming that if they were never reconfigured from defaults then regcache_sync() would not write them out because they are not dirty. Unfortunately regcache_sync() is not that smart. If the chip has not reset (so the driver has not called regcache_mark_dirty()) a regcache_sync() could write out registers that are not dirty. To avoid accidental overwriting of the ASP registers, they are removed from the table of defaults and instead are populated with defaults only if one of the ASP DAI configuration functions is called. So if the DAI has never been configured, the firmware is assumed to have ownership of these registers, and the regmap cache will not contain any entries for them. Signed-off-by: Richard Fitzgerald Fixes: 07f7d6e7a124 ("ASoC: cs35l56: Fix for initializing ASP1 mixer registers") Link: https://msgid.link/r/20240408101803.43183-5-rf@opensource.cirrus.com Signed-off-by: Mark Brown --- include/sound/cs35l56.h | 2 ++ sound/soc/codecs/cs35l56-shared.c | 63 ++++++++++++++++++++++++++------------- sound/soc/codecs/cs35l56.c | 24 ++++++++++++++- 3 files changed, 67 insertions(+), 22 deletions(-) diff --git a/include/sound/cs35l56.h b/include/sound/cs35l56.h index e0629699b563..1a3c6f66f620 100644 --- a/include/sound/cs35l56.h +++ b/include/sound/cs35l56.h @@ -267,6 +267,7 @@ struct cs35l56_base { bool fw_patched; bool secured; bool can_hibernate; + bool fw_owns_asp1; bool cal_data_valid; s8 cal_index; struct cirrus_amp_cal_data cal_data; @@ -283,6 +284,7 @@ extern const char * const cs35l56_tx_input_texts[CS35L56_NUM_INPUT_SRC]; extern const unsigned int cs35l56_tx_input_values[CS35L56_NUM_INPUT_SRC]; int cs35l56_set_patch(struct cs35l56_base *cs35l56_base); +int cs35l56_init_asp1_regs_for_driver_control(struct cs35l56_base *cs35l56_base); int cs35l56_force_sync_asp1_registers_from_cache(struct cs35l56_base *cs35l56_base); int cs35l56_mbox_send(struct cs35l56_base *cs35l56_base, unsigned int command); int cs35l56_firmware_shutdown(struct cs35l56_base *cs35l56_base); diff --git a/sound/soc/codecs/cs35l56-shared.c b/sound/soc/codecs/cs35l56-shared.c index a83317db75ed..ec1d95e57061 100644 --- a/sound/soc/codecs/cs35l56-shared.c +++ b/sound/soc/codecs/cs35l56-shared.c @@ -40,16 +40,11 @@ EXPORT_SYMBOL_NS_GPL(cs35l56_set_patch, SND_SOC_CS35L56_SHARED); static const struct reg_default cs35l56_reg_defaults[] = { /* no defaults for OTP_MEM - first read populates cache */ - { CS35L56_ASP1_ENABLES1, 0x00000000 }, - { CS35L56_ASP1_CONTROL1, 0x00000028 }, - { CS35L56_ASP1_CONTROL2, 0x18180200 }, - { CS35L56_ASP1_CONTROL3, 0x00000002 }, - { CS35L56_ASP1_FRAME_CONTROL1, 0x03020100 }, - { CS35L56_ASP1_FRAME_CONTROL5, 0x00020100 }, - { CS35L56_ASP1_DATA_CONTROL1, 0x00000018 }, - { CS35L56_ASP1_DATA_CONTROL5, 0x00000018 }, - - /* no defaults for ASP1TX mixer */ + /* + * No defaults for ASP1 control or ASP1TX mixer. See + * cs35l56_populate_asp1_register_defaults() and + * cs35l56_sync_asp1_mixer_widgets_with_firmware(). + */ { CS35L56_SWIRE_DP3_CH1_INPUT, 0x00000018 }, { CS35L56_SWIRE_DP3_CH2_INPUT, 0x00000019 }, @@ -210,6 +205,36 @@ static bool cs35l56_volatile_reg(struct device *dev, unsigned int reg) } } +static const struct reg_sequence cs35l56_asp1_defaults[] = { + REG_SEQ0(CS35L56_ASP1_ENABLES1, 0x00000000), + REG_SEQ0(CS35L56_ASP1_CONTROL1, 0x00000028), + REG_SEQ0(CS35L56_ASP1_CONTROL2, 0x18180200), + REG_SEQ0(CS35L56_ASP1_CONTROL3, 0x00000002), + REG_SEQ0(CS35L56_ASP1_FRAME_CONTROL1, 0x03020100), + REG_SEQ0(CS35L56_ASP1_FRAME_CONTROL5, 0x00020100), + REG_SEQ0(CS35L56_ASP1_DATA_CONTROL1, 0x00000018), + REG_SEQ0(CS35L56_ASP1_DATA_CONTROL5, 0x00000018), +}; + +/* + * The firmware can have control of the ASP so we don't provide regmap + * with defaults for these registers, to prevent a regcache_sync() from + * overwriting the firmware settings. But if the machine driver hooks up + * the ASP it means the driver is taking control of the ASP, so then the + * registers are populated with the defaults. + */ +int cs35l56_init_asp1_regs_for_driver_control(struct cs35l56_base *cs35l56_base) +{ + if (!cs35l56_base->fw_owns_asp1) + return 0; + + cs35l56_base->fw_owns_asp1 = false; + + return regmap_multi_reg_write(cs35l56_base->regmap, cs35l56_asp1_defaults, + ARRAY_SIZE(cs35l56_asp1_defaults)); +} +EXPORT_SYMBOL_NS_GPL(cs35l56_init_asp1_regs_for_driver_control, SND_SOC_CS35L56_SHARED); + /* * The firmware boot sequence can overwrite the ASP1 config registers so that * they don't match regmap's view of their values. Rewrite the values from the @@ -217,19 +242,15 @@ static bool cs35l56_volatile_reg(struct device *dev, unsigned int reg) */ int cs35l56_force_sync_asp1_registers_from_cache(struct cs35l56_base *cs35l56_base) { - struct reg_sequence asp1_regs[] = { - { .reg = CS35L56_ASP1_ENABLES1 }, - { .reg = CS35L56_ASP1_CONTROL1 }, - { .reg = CS35L56_ASP1_CONTROL2 }, - { .reg = CS35L56_ASP1_CONTROL3 }, - { .reg = CS35L56_ASP1_FRAME_CONTROL1 }, - { .reg = CS35L56_ASP1_FRAME_CONTROL5 }, - { .reg = CS35L56_ASP1_DATA_CONTROL1 }, - { .reg = CS35L56_ASP1_DATA_CONTROL5 }, - }; + struct reg_sequence asp1_regs[ARRAY_SIZE(cs35l56_asp1_defaults)]; int i, ret; - /* Read values from regmap cache into a write sequence */ + if (cs35l56_base->fw_owns_asp1) + return 0; + + memcpy(asp1_regs, cs35l56_asp1_defaults, sizeof(asp1_regs)); + + /* Read current values from regmap cache into the write sequence */ for (i = 0; i < ARRAY_SIZE(asp1_regs); ++i) { ret = regmap_read(cs35l56_base->regmap, asp1_regs[i].reg, &asp1_regs[i].def); if (ret) diff --git a/sound/soc/codecs/cs35l56.c b/sound/soc/codecs/cs35l56.c index 5a4e0e479414..6331b8c6136e 100644 --- a/sound/soc/codecs/cs35l56.c +++ b/sound/soc/codecs/cs35l56.c @@ -454,9 +454,14 @@ static int cs35l56_asp_dai_set_fmt(struct snd_soc_dai *codec_dai, unsigned int f { struct cs35l56_private *cs35l56 = snd_soc_component_get_drvdata(codec_dai->component); unsigned int val; + int ret; dev_dbg(cs35l56->base.dev, "%s: %#x\n", __func__, fmt); + ret = cs35l56_init_asp1_regs_for_driver_control(&cs35l56->base); + if (ret) + return ret; + switch (fmt & SND_SOC_DAIFMT_CLOCK_PROVIDER_MASK) { case SND_SOC_DAIFMT_CBC_CFC: break; @@ -530,6 +535,11 @@ static int cs35l56_asp_dai_set_tdm_slot(struct snd_soc_dai *dai, unsigned int tx unsigned int rx_mask, int slots, int slot_width) { struct cs35l56_private *cs35l56 = snd_soc_component_get_drvdata(dai->component); + int ret; + + ret = cs35l56_init_asp1_regs_for_driver_control(&cs35l56->base); + if (ret) + return ret; if ((slots == 0) || (slot_width == 0)) { dev_dbg(cs35l56->base.dev, "tdm config cleared\n"); @@ -578,6 +588,11 @@ static int cs35l56_asp_dai_hw_params(struct snd_pcm_substream *substream, struct cs35l56_private *cs35l56 = snd_soc_component_get_drvdata(dai->component); unsigned int rate = params_rate(params); u8 asp_width, asp_wl; + int ret; + + ret = cs35l56_init_asp1_regs_for_driver_control(&cs35l56->base); + if (ret) + return ret; asp_wl = params_width(params); if (cs35l56->asp_slot_width) @@ -634,7 +649,11 @@ static int cs35l56_asp_dai_set_sysclk(struct snd_soc_dai *dai, int clk_id, unsigned int freq, int dir) { struct cs35l56_private *cs35l56 = snd_soc_component_get_drvdata(dai->component); - int freq_id; + int freq_id, ret; + + ret = cs35l56_init_asp1_regs_for_driver_control(&cs35l56->base); + if (ret) + return ret; if (freq == 0) { cs35l56->sysclk_set = false; @@ -1403,6 +1422,9 @@ int cs35l56_common_probe(struct cs35l56_private *cs35l56) cs35l56->base.cal_index = -1; cs35l56->speaker_id = -ENOENT; + /* Assume that the firmware owns ASP1 until we know different */ + cs35l56->base.fw_owns_asp1 = true; + dev_set_drvdata(cs35l56->base.dev, cs35l56); cs35l56_fill_supply_names(cs35l56->supplies); -- cgit v1.2.3 From 965e49cdf8c19f21b8308adeded3a8139cff5c84 Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Tue, 9 Apr 2024 14:00:33 +0300 Subject: ASoC: SOF: ipc4-pcm: Use consistent name for snd_sof_pcm_stream pointer Throughout the file the pointer for snd_sof_pcm_stream is named either 'stream' or (wrongly) 'spcm' which confuses the reader. Use 'sps' for the pointer name as it is the most common name used in SOF codebase. Signed-off-by: Peter Ujfalusi Reviewed-by: Pierre-Louis Bossart Reviewed-by: Ranjani Sridharan Link: https://msgid.link/r/20240409110036.9411-2-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown --- sound/soc/sof/ipc4-pcm.c | 22 +++++++++++----------- 1 file changed, 11 insertions(+), 11 deletions(-) diff --git a/sound/soc/sof/ipc4-pcm.c b/sound/soc/sof/ipc4-pcm.c index e915f9f87a6c..f989cc2992bf 100644 --- a/sound/soc/sof/ipc4-pcm.c +++ b/sound/soc/sof/ipc4-pcm.c @@ -764,7 +764,7 @@ static int sof_ipc4_pcm_setup(struct snd_sof_dev *sdev, struct snd_sof_pcm *spcm return 0; } -static void sof_ipc4_build_time_info(struct snd_sof_dev *sdev, struct snd_sof_pcm_stream *spcm) +static void sof_ipc4_build_time_info(struct snd_sof_dev *sdev, struct snd_sof_pcm_stream *sps) { struct sof_ipc4_copier *host_copier = NULL; struct sof_ipc4_copier *dai_copier = NULL; @@ -775,7 +775,7 @@ static void sof_ipc4_build_time_info(struct snd_sof_dev *sdev, struct snd_sof_pc int i; /* find host & dai to locate info in memory window */ - for_each_dapm_widgets(spcm->list, i, widget) { + for_each_dapm_widgets(sps->list, i, widget) { struct snd_sof_widget *swidget = widget->dobj.private; if (!swidget) @@ -795,7 +795,7 @@ static void sof_ipc4_build_time_info(struct snd_sof_dev *sdev, struct snd_sof_pc return; } - info = spcm->private; + info = sps->private; info->host_copier = host_copier; info->dai_copier = dai_copier; info->llp_offset = offsetof(struct sof_ipc4_fw_registers, llp_gpdma_reading_slots) + @@ -864,7 +864,7 @@ static int sof_ipc4_pcm_hw_params(struct snd_soc_component *component, static int sof_ipc4_get_stream_start_offset(struct snd_sof_dev *sdev, struct snd_pcm_substream *substream, - struct snd_sof_pcm_stream *stream, + struct snd_sof_pcm_stream *sps, struct sof_ipc4_timestamp_info *time_info) { struct sof_ipc4_copier *host_copier = time_info->host_copier; @@ -918,7 +918,7 @@ static int sof_ipc4_pcm_pointer(struct snd_soc_component *component, struct sof_ipc4_timestamp_info *time_info; struct sof_ipc4_llp_reading_slot llp; snd_pcm_uframes_t head_cnt, tail_cnt; - struct snd_sof_pcm_stream *stream; + struct snd_sof_pcm_stream *sps; u64 dai_cnt, host_cnt, host_ptr; struct snd_sof_pcm *spcm; int ret; @@ -927,8 +927,8 @@ static int sof_ipc4_pcm_pointer(struct snd_soc_component *component, if (!spcm) return -EOPNOTSUPP; - stream = &spcm->stream[substream->stream]; - time_info = stream->private; + sps = &spcm->stream[substream->stream]; + time_info = sps->private; if (!time_info) return -EOPNOTSUPP; @@ -938,7 +938,7 @@ static int sof_ipc4_pcm_pointer(struct snd_soc_component *component, * the statistics is complete. And it will not change after the first initiailization. */ if (time_info->stream_start_offset == SOF_IPC4_INVALID_STREAM_POSITION) { - ret = sof_ipc4_get_stream_start_offset(sdev, substream, stream, time_info); + ret = sof_ipc4_get_stream_start_offset(sdev, substream, sps, time_info); if (ret < 0) return -EOPNOTSUPP; } @@ -1030,15 +1030,15 @@ static snd_pcm_sframes_t sof_ipc4_pcm_delay(struct snd_soc_component *component, { struct snd_soc_pcm_runtime *rtd = snd_soc_substream_to_rtd(substream); struct sof_ipc4_timestamp_info *time_info; - struct snd_sof_pcm_stream *stream; + struct snd_sof_pcm_stream *sps; struct snd_sof_pcm *spcm; spcm = snd_sof_find_spcm_dai(component, rtd); if (!spcm) return 0; - stream = &spcm->stream[substream->stream]; - time_info = stream->private; + sps = &spcm->stream[substream->stream]; + time_info = sps->private; /* * Report the stored delay value calculated in the pointer callback. * In the unlikely event that the calculation was skipped/aborted, the -- cgit v1.2.3 From 36e980050b0733829e4e0f97b97f7907ba9f00bb Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Tue, 9 Apr 2024 14:00:34 +0300 Subject: ASoC: SOF: ipc4-pcm: Use consistent name for sof_ipc4_timestamp_info pointer The pointer to sof_ipc4_timestamp_info named most of the time as 'time_info' only to be named as 'stream_info' or 'info' in two function. Use the consistent name of 'time_info' throughout the file. Signed-off-by: Peter Ujfalusi Reviewed-by: Pierre-Louis Bossart Reviewed-by: Ranjani Sridharan Link: https://msgid.link/r/20240409110036.9411-3-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown --- sound/soc/sof/ipc4-pcm.c | 40 ++++++++++++++++++++-------------------- 1 file changed, 20 insertions(+), 20 deletions(-) diff --git a/sound/soc/sof/ipc4-pcm.c b/sound/soc/sof/ipc4-pcm.c index f989cc2992bf..74b0d0d00270 100644 --- a/sound/soc/sof/ipc4-pcm.c +++ b/sound/soc/sof/ipc4-pcm.c @@ -721,7 +721,7 @@ static int sof_ipc4_pcm_setup(struct snd_sof_dev *sdev, struct snd_sof_pcm *spcm { struct snd_sof_pcm_stream_pipeline_list *pipeline_list; struct sof_ipc4_fw_data *ipc4_data = sdev->private; - struct sof_ipc4_timestamp_info *stream_info; + struct sof_ipc4_timestamp_info *time_info; bool support_info = true; u32 abi_version; u32 abi_offset; @@ -752,13 +752,13 @@ static int sof_ipc4_pcm_setup(struct snd_sof_dev *sdev, struct snd_sof_pcm *spcm if (!support_info) continue; - stream_info = kzalloc(sizeof(*stream_info), GFP_KERNEL); - if (!stream_info) { + time_info = kzalloc(sizeof(*time_info), GFP_KERNEL); + if (!time_info) { sof_ipc4_pcm_free(sdev, spcm); return -ENOMEM; } - spcm->stream[stream].private = stream_info; + spcm->stream[stream].private = time_info; } return 0; @@ -769,7 +769,7 @@ static void sof_ipc4_build_time_info(struct snd_sof_dev *sdev, struct snd_sof_pc struct sof_ipc4_copier *host_copier = NULL; struct sof_ipc4_copier *dai_copier = NULL; struct sof_ipc4_llp_reading_slot llp_slot; - struct sof_ipc4_timestamp_info *info; + struct sof_ipc4_timestamp_info *time_info; struct snd_soc_dapm_widget *widget; struct snd_sof_dai *dai; int i; @@ -795,44 +795,44 @@ static void sof_ipc4_build_time_info(struct snd_sof_dev *sdev, struct snd_sof_pc return; } - info = sps->private; - info->host_copier = host_copier; - info->dai_copier = dai_copier; - info->llp_offset = offsetof(struct sof_ipc4_fw_registers, llp_gpdma_reading_slots) + - sdev->fw_info_box.offset; + time_info = sps->private; + time_info->host_copier = host_copier; + time_info->dai_copier = dai_copier; + time_info->llp_offset = offsetof(struct sof_ipc4_fw_registers, + llp_gpdma_reading_slots) + sdev->fw_info_box.offset; /* find llp slot used by current dai */ for (i = 0; i < SOF_IPC4_MAX_LLP_GPDMA_READING_SLOTS; i++) { - sof_mailbox_read(sdev, info->llp_offset, &llp_slot, sizeof(llp_slot)); + sof_mailbox_read(sdev, time_info->llp_offset, &llp_slot, sizeof(llp_slot)); if (llp_slot.node_id == dai_copier->data.gtw_cfg.node_id) break; - info->llp_offset += sizeof(llp_slot); + time_info->llp_offset += sizeof(llp_slot); } if (i < SOF_IPC4_MAX_LLP_GPDMA_READING_SLOTS) return; /* if no llp gpdma slot is used, check aggregated sdw slot */ - info->llp_offset = offsetof(struct sof_ipc4_fw_registers, llp_sndw_reading_slots) + - sdev->fw_info_box.offset; + time_info->llp_offset = offsetof(struct sof_ipc4_fw_registers, + llp_sndw_reading_slots) + sdev->fw_info_box.offset; for (i = 0; i < SOF_IPC4_MAX_LLP_SNDW_READING_SLOTS; i++) { - sof_mailbox_read(sdev, info->llp_offset, &llp_slot, sizeof(llp_slot)); + sof_mailbox_read(sdev, time_info->llp_offset, &llp_slot, sizeof(llp_slot)); if (llp_slot.node_id == dai_copier->data.gtw_cfg.node_id) break; - info->llp_offset += sizeof(llp_slot); + time_info->llp_offset += sizeof(llp_slot); } if (i < SOF_IPC4_MAX_LLP_SNDW_READING_SLOTS) return; /* check EVAD slot */ - info->llp_offset = offsetof(struct sof_ipc4_fw_registers, llp_evad_reading_slot) + - sdev->fw_info_box.offset; - sof_mailbox_read(sdev, info->llp_offset, &llp_slot, sizeof(llp_slot)); + time_info->llp_offset = offsetof(struct sof_ipc4_fw_registers, + llp_evad_reading_slot) + sdev->fw_info_box.offset; + sof_mailbox_read(sdev, time_info->llp_offset, &llp_slot, sizeof(llp_slot)); if (llp_slot.node_id != dai_copier->data.gtw_cfg.node_id) - info->llp_offset = 0; + time_info->llp_offset = 0; } static int sof_ipc4_pcm_hw_params(struct snd_soc_component *component, -- cgit v1.2.3 From 551af3280c16166244425bbb1d73028f3a907e1f Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Tue, 9 Apr 2024 14:00:35 +0300 Subject: ASoC: SOF: ipc4-pcm: Introduce generic sof_ipc4_pcm_stream_priv Using the sof_ipc4_timestamp_info struct directly as sps->private data is too restrictive, add a new generic sof_ipc4_pcm_stream_priv struct containing the time_info to allow new information to be stored in a generic way. Signed-off-by: Peter Ujfalusi Reviewed-by: Pierre-Louis Bossart Reviewed-by: Ranjani Sridharan Link: https://msgid.link/r/20240409110036.9411-4-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown --- sound/soc/sof/ipc4-pcm.c | 43 +++++++++++++++++++++++++++++++++++-------- 1 file changed, 35 insertions(+), 8 deletions(-) diff --git a/sound/soc/sof/ipc4-pcm.c b/sound/soc/sof/ipc4-pcm.c index 74b0d0d00270..34ce6bb7f37d 100644 --- a/sound/soc/sof/ipc4-pcm.c +++ b/sound/soc/sof/ipc4-pcm.c @@ -37,6 +37,22 @@ struct sof_ipc4_timestamp_info { snd_pcm_sframes_t delay; }; +/** + * struct sof_ipc4_pcm_stream_priv - IPC4 specific private data + * @time_info: pointer to time info struct if it is supported, otherwise NULL + */ +struct sof_ipc4_pcm_stream_priv { + struct sof_ipc4_timestamp_info *time_info; +}; + +static inline struct sof_ipc4_timestamp_info * +sof_ipc4_sps_to_time_info(struct snd_sof_pcm_stream *sps) +{ + struct sof_ipc4_pcm_stream_priv *stream_priv = sps->private; + + return stream_priv->time_info; +} + static int sof_ipc4_set_multi_pipeline_state(struct snd_sof_dev *sdev, u32 state, struct ipc4_pipeline_set_state_data *trigger_list) { @@ -452,7 +468,7 @@ static int sof_ipc4_trigger_pipelines(struct snd_soc_component *component, * Invalidate the stream_start_offset to make sure that it is * going to be updated if the stream resumes */ - time_info = spcm->stream[substream->stream].private; + time_info = sof_ipc4_sps_to_time_info(&spcm->stream[substream->stream]); if (time_info) time_info->stream_start_offset = SOF_IPC4_INVALID_STREAM_POSITION; @@ -706,12 +722,16 @@ static int sof_ipc4_pcm_dai_link_fixup(struct snd_soc_pcm_runtime *rtd, static void sof_ipc4_pcm_free(struct snd_sof_dev *sdev, struct snd_sof_pcm *spcm) { struct snd_sof_pcm_stream_pipeline_list *pipeline_list; + struct sof_ipc4_pcm_stream_priv *stream_priv; int stream; for_each_pcm_streams(stream) { pipeline_list = &spcm->stream[stream].pipeline_list; kfree(pipeline_list->pipelines); pipeline_list->pipelines = NULL; + + stream_priv = spcm->stream[stream].private; + kfree(stream_priv->time_info); kfree(spcm->stream[stream].private); spcm->stream[stream].private = NULL; } @@ -721,6 +741,7 @@ static int sof_ipc4_pcm_setup(struct snd_sof_dev *sdev, struct snd_sof_pcm *spcm { struct snd_sof_pcm_stream_pipeline_list *pipeline_list; struct sof_ipc4_fw_data *ipc4_data = sdev->private; + struct sof_ipc4_pcm_stream_priv *stream_priv; struct sof_ipc4_timestamp_info *time_info; bool support_info = true; u32 abi_version; @@ -749,6 +770,14 @@ static int sof_ipc4_pcm_setup(struct snd_sof_dev *sdev, struct snd_sof_pcm *spcm return -ENOMEM; } + stream_priv = kzalloc(sizeof(*stream_priv), GFP_KERNEL); + if (!stream_priv) { + sof_ipc4_pcm_free(sdev, spcm); + return -ENOMEM; + } + + spcm->stream[stream].private = stream_priv; + if (!support_info) continue; @@ -758,7 +787,7 @@ static int sof_ipc4_pcm_setup(struct snd_sof_dev *sdev, struct snd_sof_pcm *spcm return -ENOMEM; } - spcm->stream[stream].private = time_info; + stream_priv->time_info = time_info; } return 0; @@ -795,7 +824,7 @@ static void sof_ipc4_build_time_info(struct snd_sof_dev *sdev, struct snd_sof_pc return; } - time_info = sps->private; + time_info = sof_ipc4_sps_to_time_info(sps); time_info->host_copier = host_copier; time_info->dai_copier = dai_copier; time_info->llp_offset = offsetof(struct sof_ipc4_fw_registers, @@ -849,7 +878,7 @@ static int sof_ipc4_pcm_hw_params(struct snd_soc_component *component, if (!spcm) return -EINVAL; - time_info = spcm->stream[substream->stream].private; + time_info = sof_ipc4_sps_to_time_info(&spcm->stream[substream->stream]); /* delay calculation is not supported by current fw_reg ABI */ if (!time_info) return 0; @@ -928,7 +957,7 @@ static int sof_ipc4_pcm_pointer(struct snd_soc_component *component, return -EOPNOTSUPP; sps = &spcm->stream[substream->stream]; - time_info = sps->private; + time_info = sof_ipc4_sps_to_time_info(sps); if (!time_info) return -EOPNOTSUPP; @@ -1030,15 +1059,13 @@ static snd_pcm_sframes_t sof_ipc4_pcm_delay(struct snd_soc_component *component, { struct snd_soc_pcm_runtime *rtd = snd_soc_substream_to_rtd(substream); struct sof_ipc4_timestamp_info *time_info; - struct snd_sof_pcm_stream *sps; struct snd_sof_pcm *spcm; spcm = snd_sof_find_spcm_dai(component, rtd); if (!spcm) return 0; - sps = &spcm->stream[substream->stream]; - time_info = sps->private; + time_info = sof_ipc4_sps_to_time_info(&spcm->stream[substream->stream]); /* * Report the stored delay value calculated in the pointer callback. * In the unlikely event that the calculation was skipped/aborted, the -- cgit v1.2.3 From 7211814f2adcf376b8db6321447a9725c33b6ae7 Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Tue, 9 Apr 2024 14:00:36 +0300 Subject: ASoC: SOF: ipc4-pcm: Do not reset the ChainDMA if it has not been allocated The ChainDMA operation differs from normal pipelines that it is only created when the stream started, in fact a PCM using ChainDMA has no pipelines, modules. To reset a ChainDMA, it needs to be first allocated in firmware. When PulseAudio/PipeWire starts, they will probe the PCMs by opening them, check hw_params and then close the PCM without starting audio. Unconditionally resetting the ChainDMA can result the following error: ipc tx : 0xe040000|0x0: GLB_CHAIN_DMA ipc tx reply: 0x2e000007|0x0: GLB_CHAIN_DMA FW reported error: 7 - Unsupported operation requested ipc error for msg 0xe040000|0x0 sof_pcm_stream_free: pcm_ops hw_free failed -22 Add a new chain_dma_allocated flag to sof_ipc4_pcm_stream_priv to store the ChainDMA allocation state and use this flag to skip sending the reset if the ChainDMA is not allocated. Signed-off-by: Peter Ujfalusi Reviewed-by: Pierre-Louis Bossart Reviewed-by: Ranjani Sridharan Link: https://msgid.link/r/20240409110036.9411-5-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown --- sound/soc/sof/ipc4-pcm.c | 24 ++++++++++++++++++++---- 1 file changed, 20 insertions(+), 4 deletions(-) diff --git a/sound/soc/sof/ipc4-pcm.c b/sound/soc/sof/ipc4-pcm.c index 34ce6bb7f37d..4594470ed08b 100644 --- a/sound/soc/sof/ipc4-pcm.c +++ b/sound/soc/sof/ipc4-pcm.c @@ -40,9 +40,12 @@ struct sof_ipc4_timestamp_info { /** * struct sof_ipc4_pcm_stream_priv - IPC4 specific private data * @time_info: pointer to time info struct if it is supported, otherwise NULL + * @chain_dma_allocated: indicates the ChainDMA allocation state */ struct sof_ipc4_pcm_stream_priv { struct sof_ipc4_timestamp_info *time_info; + + bool chain_dma_allocated; }; static inline struct sof_ipc4_timestamp_info * @@ -269,14 +272,17 @@ sof_ipc4_update_pipeline_state(struct snd_sof_dev *sdev, int state, int cmd, */ static int sof_ipc4_chain_dma_trigger(struct snd_sof_dev *sdev, - int direction, + struct snd_sof_pcm *spcm, int direction, struct snd_sof_pcm_stream_pipeline_list *pipeline_list, int state, int cmd) { struct sof_ipc4_fw_data *ipc4_data = sdev->private; + struct sof_ipc4_pcm_stream_priv *stream_priv; bool allocate, enable, set_fifo_size; struct sof_ipc4_msg msg = {{ 0 }}; - int i; + int ret, i; + + stream_priv = spcm->stream[direction].private; switch (state) { case SOF_IPC4_PIPE_RUNNING: /* Allocate and start chained dma */ @@ -297,6 +303,11 @@ static int sof_ipc4_chain_dma_trigger(struct snd_sof_dev *sdev, set_fifo_size = false; break; case SOF_IPC4_PIPE_RESET: /* Disable and free chained DMA. */ + + /* ChainDMA can only be reset if it has been allocated */ + if (!stream_priv->chain_dma_allocated) + return 0; + allocate = false; enable = false; set_fifo_size = false; @@ -354,7 +365,12 @@ static int sof_ipc4_chain_dma_trigger(struct snd_sof_dev *sdev, if (enable) msg.primary |= SOF_IPC4_GLB_CHAIN_DMA_ENABLE_MASK; - return sof_ipc_tx_message_no_reply(sdev->ipc, &msg, 0); + ret = sof_ipc_tx_message_no_reply(sdev->ipc, &msg, 0); + /* Update the ChainDMA allocation state */ + if (!ret) + stream_priv->chain_dma_allocated = allocate; + + return ret; } static int sof_ipc4_trigger_pipelines(struct snd_soc_component *component, @@ -394,7 +410,7 @@ static int sof_ipc4_trigger_pipelines(struct snd_soc_component *component, * trigger function that handles the rest for the substream. */ if (pipeline->use_chain_dma) - return sof_ipc4_chain_dma_trigger(sdev, substream->stream, + return sof_ipc4_chain_dma_trigger(sdev, spcm, substream->stream, pipeline_list, state, cmd); /* allocate memory for the pipeline data */ -- cgit v1.2.3 From c352a04107264ff5ec3c38db044137cd99c4ba55 Mon Sep 17 00:00:00 2001 From: Uwe Kleine-König Date: Tue, 9 Apr 2024 11:03:07 +0200 Subject: auxdisplay: seg-led-gpio: Convert to platform remove callback returning void MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König Reviewed-by: Geert Uytterhoeven Signed-off-by: Andy Shevchenko --- drivers/auxdisplay/seg-led-gpio.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/drivers/auxdisplay/seg-led-gpio.c b/drivers/auxdisplay/seg-led-gpio.c index 35a8dbb1e9d2..183ab3011cbb 100644 --- a/drivers/auxdisplay/seg-led-gpio.c +++ b/drivers/auxdisplay/seg-led-gpio.c @@ -81,14 +81,12 @@ static int seg_led_probe(struct platform_device *pdev) return linedisp_register(&priv->linedisp, dev, 1, &seg_led_linedisp_ops); } -static int seg_led_remove(struct platform_device *pdev) +static void seg_led_remove(struct platform_device *pdev) { struct seg_led_priv *priv = platform_get_drvdata(pdev); cancel_delayed_work_sync(&priv->work); linedisp_unregister(&priv->linedisp); - - return 0; } static const struct of_device_id seg_led_of_match[] = { @@ -99,7 +97,7 @@ MODULE_DEVICE_TABLE(of, seg_led_of_match); static struct platform_driver seg_led_driver = { .probe = seg_led_probe, - .remove = seg_led_remove, + .remove_new = seg_led_remove, .driver = { .name = "seg-led-gpio", .of_match_table = seg_led_of_match, -- cgit v1.2.3 From 305539a25a1c9929b058381aac6104bd939c0fee Mon Sep 17 00:00:00 2001 From: Pierre-Louis Bossart Date: Mon, 8 Apr 2024 14:41:45 -0500 Subject: ASoC: SOF: Intel: add default firmware library path for LNL MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The commit cd6f2a2e6346 ("ASoC: SOF: Intel: Set the default firmware library path for IPC4") added the default_lib_path field for all platforms, but this was missed when LunarLake was later introduced. Fixes: 64a63d9914a5 ("ASoC: SOF: Intel: LNL: Add support for Lunarlake platform") Signed-off-by: Pierre-Louis Bossart Reviewed-by: Péter Ujfalusi Reviewed-by: Bard Liao Link: https://msgid.link/r/20240408194147.28919-2-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown --- sound/soc/sof/intel/pci-lnl.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/sound/soc/sof/intel/pci-lnl.c b/sound/soc/sof/intel/pci-lnl.c index b26ffe767fab..b14e508f1f31 100644 --- a/sound/soc/sof/intel/pci-lnl.c +++ b/sound/soc/sof/intel/pci-lnl.c @@ -35,6 +35,9 @@ static const struct sof_dev_desc lnl_desc = { .default_fw_path = { [SOF_IPC_TYPE_4] = "intel/sof-ipc4/lnl", }, + .default_lib_path = { + [SOF_IPC_TYPE_4] = "intel/sof-ipc4-lib/lnl", + }, .default_tplg_path = { [SOF_IPC_TYPE_4] = "intel/sof-ipc4-tplg", }, -- cgit v1.2.3 From 90a2353080eedec855d63f6aadfda14104ee9b06 Mon Sep 17 00:00:00 2001 From: Ranjani Sridharan Date: Mon, 8 Apr 2024 14:41:46 -0500 Subject: ASoC: SOF: pcm: Restrict DSP D0i3 during S0ix to IPC3 Introduce a new field in struct sof_ipc_pcm_ops that can be used to restrict DSP D0i3 during S0ix suspend to IPC3. With IPC4, all streams must be stopped before S0ix suspend. Reviewed-by: Uday M Bhat Reviewed-by: Bard Liao Signed-off-by: Ranjani Sridharan Signed-off-by: Pierre-Louis Bossart Link: https://msgid.link/r/20240408194147.28919-3-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown --- sound/soc/sof/ipc3-pcm.c | 1 + sound/soc/sof/pcm.c | 13 ++++++------- sound/soc/sof/sof-audio.h | 2 ++ 3 files changed, 9 insertions(+), 7 deletions(-) diff --git a/sound/soc/sof/ipc3-pcm.c b/sound/soc/sof/ipc3-pcm.c index 35769dd7905e..af0bf354cb20 100644 --- a/sound/soc/sof/ipc3-pcm.c +++ b/sound/soc/sof/ipc3-pcm.c @@ -434,4 +434,5 @@ const struct sof_ipc_pcm_ops ipc3_pcm_ops = { .trigger = sof_ipc3_pcm_trigger, .dai_link_fixup = sof_ipc3_pcm_dai_link_fixup, .reset_hw_params_during_stop = true, + .d0i3_supported_in_s0ix = true, }; diff --git a/sound/soc/sof/pcm.c b/sound/soc/sof/pcm.c index f03cee94bce6..8804e00e7251 100644 --- a/sound/soc/sof/pcm.c +++ b/sound/soc/sof/pcm.c @@ -325,14 +325,13 @@ static int sof_pcm_trigger(struct snd_soc_component *component, ipc_first = true; break; case SNDRV_PCM_TRIGGER_SUSPEND: - if (sdev->system_suspend_target == SOF_SUSPEND_S0IX && + /* + * If DSP D0I3 is allowed during S0iX, set the suspend_ignored flag for + * D0I3-compatible streams to keep the firmware pipeline running + */ + if (pcm_ops && pcm_ops->d0i3_supported_in_s0ix && + sdev->system_suspend_target == SOF_SUSPEND_S0IX && spcm->stream[substream->stream].d0i3_compatible) { - /* - * trap the event, not sending trigger stop to - * prevent the FW pipelines from being stopped, - * and mark the flag to ignore the upcoming DAPM - * PM events. - */ spcm->stream[substream->stream].suspend_ignored = true; return 0; } diff --git a/sound/soc/sof/sof-audio.h b/sound/soc/sof/sof-audio.h index 86bbb531e142..499b6084b526 100644 --- a/sound/soc/sof/sof-audio.h +++ b/sound/soc/sof/sof-audio.h @@ -116,6 +116,7 @@ struct snd_sof_dai_config_data { * triggers. The FW keeps the host DMA running in this case and * therefore the host must do the same and should stop the DMA during * hw_free. + * @d0i3_supported_in_s0ix: Allow DSP D0I3 during S0iX */ struct sof_ipc_pcm_ops { int (*hw_params)(struct snd_soc_component *component, struct snd_pcm_substream *substream, @@ -135,6 +136,7 @@ struct sof_ipc_pcm_ops { bool reset_hw_params_during_stop; bool ipc_first_on_start; bool platform_stop_during_hw_free; + bool d0i3_supported_in_s0ix; }; /** -- cgit v1.2.3 From 17f4041244e66a417c646c8a90bc6747d5f1de1e Mon Sep 17 00:00:00 2001 From: Pierre-Louis Bossart Date: Mon, 8 Apr 2024 14:41:47 -0500 Subject: ASoC: SOF: debug: show firmware/topology prefix/names MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The SOF driver has multiple profiles to select firmware/topology prefix/names depending on the platform and ipc_type, and each of those fields can be overridden with kernel parameters. This results in some cases in confusion on what configuration is actually used in a given test. We currently log the firmware and topology names in the kernel logs, but there's been an ask to add the information in debugfs to simplify test scripts used by developers and CI. This isn't meant to be a stable ABI used by apps, changes will be allowed as needed. Closes: https://github.com/thesofproject/linux/issues/3867 Signed-off-by: Pierre-Louis Bossart Reviewed-by: Péter Ujfalusi Reviewed-by: Bard Liao Link: https://msgid.link/r/20240408194147.28919-4-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown --- sound/soc/sof/debug.c | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) diff --git a/sound/soc/sof/debug.c b/sound/soc/sof/debug.c index 7c8aafca8fde..7275437ea8d8 100644 --- a/sound/soc/sof/debug.c +++ b/sound/soc/sof/debug.c @@ -330,14 +330,32 @@ EXPORT_SYMBOL_GPL(snd_sof_dbg_memory_info_init); int snd_sof_dbg_init(struct snd_sof_dev *sdev) { + struct snd_sof_pdata *plat_data = sdev->pdata; struct snd_sof_dsp_ops *ops = sof_ops(sdev); const struct snd_sof_debugfs_map *map; + struct dentry *fw_profile; int i; int err; /* use "sof" as top level debugFS dir */ sdev->debugfs_root = debugfs_create_dir("sof", NULL); + /* expose firmware/topology prefix/names for test purposes */ + fw_profile = debugfs_create_dir("fw_profile", sdev->debugfs_root); + + debugfs_create_str("fw_path", 0444, fw_profile, + (char **)&plat_data->fw_filename_prefix); + debugfs_create_str("fw_lib_path", 0444, fw_profile, + (char **)&plat_data->fw_lib_prefix); + debugfs_create_str("tplg_path", 0444, fw_profile, + (char **)&plat_data->tplg_filename_prefix); + debugfs_create_str("fw_name", 0444, fw_profile, + (char **)&plat_data->fw_filename); + debugfs_create_str("tplg_name", 0444, fw_profile, + (char **)&plat_data->tplg_filename); + debugfs_create_u32("ipc_type", 0444, fw_profile, + (u32 *)&plat_data->ipc_type); + /* init dfsentry list */ INIT_LIST_HEAD(&sdev->dfsentry_list); -- cgit v1.2.3 From 4b9a474c7c820391c0913d64431ae9e1f52a5143 Mon Sep 17 00:00:00 2001 From: "end.to.start" Date: Mon, 8 Apr 2024 18:24:54 +0300 Subject: ASoC: acp: Support microphone from device Acer 315-24p This patch adds microphone detection for the Acer 315-24p, after which a microphone appears on the device and starts working Signed-off-by: end.to.start Link: https://msgid.link/r/20240408152454.45532-1-end.to.start@mail.ru Signed-off-by: Mark Brown --- sound/soc/amd/yc/acp6x-mach.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/sound/soc/amd/yc/acp6x-mach.c b/sound/soc/amd/yc/acp6x-mach.c index 69c68d8e7a6b..1760b5d42460 100644 --- a/sound/soc/amd/yc/acp6x-mach.c +++ b/sound/soc/amd/yc/acp6x-mach.c @@ -430,6 +430,13 @@ static const struct dmi_system_id yc_acp_quirk_table[] = { DMI_MATCH(DMI_BOARD_NAME, "MRID6"), } }, + { + .driver_data = &acp6x_card, + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "MDC"), + DMI_MATCH(DMI_BOARD_NAME, "Herbag_MDU"), + } + }, { .driver_data = &acp6x_card, .matches = { -- cgit v1.2.3 From 103abab975087e1f01b76fcb54c91dbb65dbc249 Mon Sep 17 00:00:00 2001 From: Derek Fang Date: Mon, 8 Apr 2024 17:10:56 +0800 Subject: ASoC: rt5645: Fix the electric noise due to the CBJ contacts floating The codec leaves tie combo jack's sleeve/ring2 to floating status default. It would cause electric noise while connecting the active speaker jack during boot or shutdown. This patch requests a gpio to control the additional jack circuit to tie the contacts to the ground or floating. Signed-off-by: Derek Fang Link: https://msgid.link/r/20240408091057.14165-1-derek.fang@realtek.com Signed-off-by: Mark Brown --- sound/soc/codecs/rt5645.c | 25 +++++++++++++++++++++++++ 1 file changed, 25 insertions(+) diff --git a/sound/soc/codecs/rt5645.c b/sound/soc/codecs/rt5645.c index e3ba04484813..d0d24a53df74 100644 --- a/sound/soc/codecs/rt5645.c +++ b/sound/soc/codecs/rt5645.c @@ -444,6 +444,7 @@ struct rt5645_priv { struct regmap *regmap; struct i2c_client *i2c; struct gpio_desc *gpiod_hp_det; + struct gpio_desc *gpiod_cbj_sleeve; struct snd_soc_jack *hp_jack; struct snd_soc_jack *mic_jack; struct snd_soc_jack *btn_jack; @@ -3186,6 +3187,9 @@ static int rt5645_jack_detect(struct snd_soc_component *component, int jack_inse regmap_update_bits(rt5645->regmap, RT5645_IN1_CTRL2, RT5645_CBJ_MN_JD, 0); + if (rt5645->gpiod_cbj_sleeve) + gpiod_set_value(rt5645->gpiod_cbj_sleeve, 1); + msleep(600); regmap_read(rt5645->regmap, RT5645_IN1_CTRL3, &val); val &= 0x7; @@ -3202,6 +3206,8 @@ static int rt5645_jack_detect(struct snd_soc_component *component, int jack_inse snd_soc_dapm_disable_pin(dapm, "Mic Det Power"); snd_soc_dapm_sync(dapm); rt5645->jack_type = SND_JACK_HEADPHONE; + if (rt5645->gpiod_cbj_sleeve) + gpiod_set_value(rt5645->gpiod_cbj_sleeve, 0); } if (rt5645->pdata.level_trigger_irq) regmap_update_bits(rt5645->regmap, RT5645_IRQ_CTRL2, @@ -3229,6 +3235,9 @@ static int rt5645_jack_detect(struct snd_soc_component *component, int jack_inse if (rt5645->pdata.level_trigger_irq) regmap_update_bits(rt5645->regmap, RT5645_IRQ_CTRL2, RT5645_JD_1_1_MASK, RT5645_JD_1_1_INV); + + if (rt5645->gpiod_cbj_sleeve) + gpiod_set_value(rt5645->gpiod_cbj_sleeve, 0); } return rt5645->jack_type; @@ -4012,6 +4021,16 @@ static int rt5645_i2c_probe(struct i2c_client *i2c) return ret; } + rt5645->gpiod_cbj_sleeve = devm_gpiod_get_optional(&i2c->dev, "cbj-sleeve", + GPIOD_OUT_LOW); + + if (IS_ERR(rt5645->gpiod_cbj_sleeve)) { + ret = PTR_ERR(rt5645->gpiod_cbj_sleeve); + dev_info(&i2c->dev, "failed to initialize gpiod, ret=%d\n", ret); + if (ret != -ENOENT) + return ret; + } + for (i = 0; i < ARRAY_SIZE(rt5645->supplies); i++) rt5645->supplies[i].supply = rt5645_supply_names[i]; @@ -4259,6 +4278,9 @@ static void rt5645_i2c_remove(struct i2c_client *i2c) cancel_delayed_work_sync(&rt5645->jack_detect_work); cancel_delayed_work_sync(&rt5645->rcclock_work); + if (rt5645->gpiod_cbj_sleeve) + gpiod_set_value(rt5645->gpiod_cbj_sleeve, 0); + regulator_bulk_disable(ARRAY_SIZE(rt5645->supplies), rt5645->supplies); } @@ -4274,6 +4296,9 @@ static void rt5645_i2c_shutdown(struct i2c_client *i2c) 0); msleep(20); regmap_write(rt5645->regmap, RT5645_RESET, 0); + + if (rt5645->gpiod_cbj_sleeve) + gpiod_set_value(rt5645->gpiod_cbj_sleeve, 0); } static int __maybe_unused rt5645_sys_suspend(struct device *dev) -- cgit v1.2.3 From 306b38e3fa727d22454a148a364123709e356600 Mon Sep 17 00:00:00 2001 From: Derek Fang Date: Mon, 8 Apr 2024 17:10:57 +0800 Subject: ASoC: dt-bindings: rt5645: add cbj sleeve gpio property Add an optional gpio property to control external CBJ circuits to avoid some electric noise caused by sleeve/ring2 contacts floating. Signed-off-by: Derek Fang Link: https://msgid.link/r/20240408091057.14165-2-derek.fang@realtek.com Signed-off-by: Mark Brown --- Documentation/devicetree/bindings/sound/rt5645.txt | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/Documentation/devicetree/bindings/sound/rt5645.txt b/Documentation/devicetree/bindings/sound/rt5645.txt index 41a62fd2ae1f..c1fa379f5f3e 100644 --- a/Documentation/devicetree/bindings/sound/rt5645.txt +++ b/Documentation/devicetree/bindings/sound/rt5645.txt @@ -20,6 +20,11 @@ Optional properties: a GPIO spec for the external headphone detect pin. If jd-mode = 0, we will get the JD status by getting the value of hp-detect-gpios. +- cbj-sleeve-gpios: + a GPIO spec to control the external combo jack circuit to tie the sleeve/ring2 + contacts to the ground or floating. It could avoid some electric noise from the + active speaker jacks. + - realtek,in2-differential Boolean. Indicate MIC2 input are differential, rather than single-ended. @@ -68,6 +73,7 @@ codec: rt5650@1a { compatible = "realtek,rt5650"; reg = <0x1a>; hp-detect-gpios = <&gpio 19 0>; + cbj-sleeve-gpios = <&gpio 20 0>; interrupt-parent = <&gpio>; interrupts = <7 IRQ_TYPE_EDGE_FALLING>; realtek,dmic-en = "true"; -- cgit v1.2.3 From cb9946971d7cb717b726710e1a9fa4ded00b9135 Mon Sep 17 00:00:00 2001 From: Jack Yu Date: Tue, 9 Apr 2024 06:47:43 +0000 Subject: ASoC: rt722-sdca: modify channel number to support 4 channels Channel numbers of dmic supports 4 channels, modify channels_max regarding to this issue. Signed-off-by: Jack Yu Link: https://msgid.link/r/6a9b1d1fb2ea4f04b2157799f04053b1@realtek.com Signed-off-by: Mark Brown --- sound/soc/codecs/rt722-sdca.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/codecs/rt722-sdca.c b/sound/soc/codecs/rt722-sdca.c index e0ea3a23f7cc..43bec8dd2ff7 100644 --- a/sound/soc/codecs/rt722-sdca.c +++ b/sound/soc/codecs/rt722-sdca.c @@ -1330,7 +1330,7 @@ static struct snd_soc_dai_driver rt722_sdca_dai[] = { .capture = { .stream_name = "DP6 DMic Capture", .channels_min = 1, - .channels_max = 2, + .channels_max = 4, .rates = RT722_STEREO_RATES, .formats = RT722_FORMATS, }, -- cgit v1.2.3 From 140e0762ca055d1aa84b17847cde5d9e47f56f76 Mon Sep 17 00:00:00 2001 From: Jack Yu Date: Tue, 9 Apr 2024 06:47:34 +0000 Subject: ASoC: rt722-sdca: add headset microphone vrefo setting Add vrefo settings to fix jd and headset mic recording issue. Signed-off-by: Jack Yu Link: https://msgid.link/r/727219ed45d3485ba8f4646700aaa8a8@realtek.com Signed-off-by: Mark Brown --- sound/soc/codecs/rt722-sdca.c | 25 +++++++++++++++++++------ sound/soc/codecs/rt722-sdca.h | 3 +++ 2 files changed, 22 insertions(+), 6 deletions(-) diff --git a/sound/soc/codecs/rt722-sdca.c b/sound/soc/codecs/rt722-sdca.c index 43bec8dd2ff7..e5bd9ef812de 100644 --- a/sound/soc/codecs/rt722-sdca.c +++ b/sound/soc/codecs/rt722-sdca.c @@ -1439,9 +1439,12 @@ static void rt722_sdca_jack_preset(struct rt722_sdca_priv *rt722) int loop_check, chk_cnt = 100, ret; unsigned int calib_status = 0; - /* Read eFuse */ - rt722_sdca_index_write(rt722, RT722_VENDOR_SPK_EFUSE, RT722_DC_CALIB_CTRL, - 0x4808); + /* Config analog bias */ + rt722_sdca_index_write(rt722, RT722_VENDOR_REG, RT722_ANALOG_BIAS_CTL3, + 0xa081); + /* GE related settings */ + rt722_sdca_index_write(rt722, RT722_VENDOR_HDA_CTL, RT722_GE_RELATED_CTL2, + 0xa009); /* Button A, B, C, D bypass mode */ rt722_sdca_index_write(rt722, RT722_VENDOR_HDA_CTL, RT722_UMP_HID_CTL4, 0xcf00); @@ -1475,9 +1478,6 @@ static void rt722_sdca_jack_preset(struct rt722_sdca_priv *rt722) if ((calib_status & 0x0040) == 0x0) break; } - /* Release HP-JD, EN_CBJ_TIE_GL/R open, en_osw gating auto done bit */ - rt722_sdca_index_write(rt722, RT722_VENDOR_REG, RT722_DIGITAL_MISC_CTRL4, - 0x0010); /* Set ADC09 power entity floating control */ rt722_sdca_index_write(rt722, RT722_VENDOR_HDA_CTL, RT722_ADC0A_08_PDE_FLOAT_CTL, 0x2a12); @@ -1490,8 +1490,21 @@ static void rt722_sdca_jack_preset(struct rt722_sdca_priv *rt722) /* Set DAC03 and HP power entity floating control */ rt722_sdca_index_write(rt722, RT722_VENDOR_HDA_CTL, RT722_DAC03_HP_PDE_FLOAT_CTL, 0x4040); + rt722_sdca_index_write(rt722, RT722_VENDOR_HDA_CTL, RT722_ENT_FLOAT_CTRL_1, + 0x4141); + rt722_sdca_index_write(rt722, RT722_VENDOR_HDA_CTL, RT722_FLOAT_CTRL_1, + 0x0101); /* Fine tune PDE40 latency */ regmap_write(rt722->regmap, 0x2f58, 0x07); + regmap_write(rt722->regmap, 0x2f03, 0x06); + /* MIC VRefo */ + rt722_sdca_index_update_bits(rt722, RT722_VENDOR_REG, + RT722_COMBO_JACK_AUTO_CTL1, 0x0200, 0x0200); + rt722_sdca_index_update_bits(rt722, RT722_VENDOR_REG, + RT722_VREFO_GAT, 0x4000, 0x4000); + /* Release HP-JD, EN_CBJ_TIE_GL/R open, en_osw gating auto done bit */ + rt722_sdca_index_write(rt722, RT722_VENDOR_REG, RT722_DIGITAL_MISC_CTRL4, + 0x0010); } int rt722_sdca_io_init(struct device *dev, struct sdw_slave *slave) diff --git a/sound/soc/codecs/rt722-sdca.h b/sound/soc/codecs/rt722-sdca.h index 44af8901352e..2464361a7958 100644 --- a/sound/soc/codecs/rt722-sdca.h +++ b/sound/soc/codecs/rt722-sdca.h @@ -69,6 +69,7 @@ struct rt722_sdca_dmic_kctrl_priv { #define RT722_COMBO_JACK_AUTO_CTL2 0x46 #define RT722_COMBO_JACK_AUTO_CTL3 0x47 #define RT722_DIGITAL_MISC_CTRL4 0x4a +#define RT722_VREFO_GAT 0x63 #define RT722_FSM_CTL 0x67 #define RT722_SDCA_INTR_REC 0x82 #define RT722_SW_CONFIG1 0x8a @@ -127,6 +128,8 @@ struct rt722_sdca_dmic_kctrl_priv { #define RT722_UMP_HID_CTL6 0x66 #define RT722_UMP_HID_CTL7 0x67 #define RT722_UMP_HID_CTL8 0x68 +#define RT722_FLOAT_CTRL_1 0x70 +#define RT722_ENT_FLOAT_CTRL_1 0x76 /* Parameter & Verb control 01 (0x1a)(NID:20h) */ #define RT722_HIDDEN_REG_SW_RESET (0x1 << 14) -- cgit v1.2.3 From 6b0856ee585d7f8a544546c3c5f1f4c49162e451 Mon Sep 17 00:00:00 2001 From: Samuel Holland Date: Wed, 10 Apr 2024 16:22:03 -0700 Subject: cache: sifive_ccache: Silence unused variable warning With W=1 and CONFIG_RISCV_NONSTANDARD_CACHE_OPS=n, GCC warns: drivers/cache/sifive_ccache.c: In function 'sifive_ccache_init': drivers/cache/sifive_ccache.c:293:23: warning: variable 'quirks' set but not used [-Wunused-but-set-variable] 293 | unsigned long quirks; | ^~~~~~ This is expected, since QUIRK_NONSTANDARD_CACHE_OPS is the only quirk still handled in this function. Fixes: c90847bcbfb6 ("cache: sifive_ccache: Partially convert to a platform driver") Reported-by: kernel test robot Closes: https://lore.kernel.org/oe-kbuild-all/202403311253.Z4NvIBxI-lkp@intel.com/ Signed-off-by: Samuel Holland Signed-off-by: Conor Dooley --- drivers/cache/sifive_ccache.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/cache/sifive_ccache.c b/drivers/cache/sifive_ccache.c index e9cc8b4786fb..6874b72ec59d 100644 --- a/drivers/cache/sifive_ccache.c +++ b/drivers/cache/sifive_ccache.c @@ -290,7 +290,7 @@ static int __init sifive_ccache_init(void) struct device_node *np; struct resource res; const struct of_device_id *match; - unsigned long quirks; + unsigned long quirks __maybe_unused; int rc; np = of_find_matching_node_and_match(NULL, sifive_ccache_ids, &match); -- cgit v1.2.3 From 8b06a24bb625728ac709f2c69405eb01025687e1 Mon Sep 17 00:00:00 2001 From: Antony Antony Date: Wed, 10 Apr 2024 19:27:12 +0200 Subject: xfrm: fix possible derferencing in error path Fix derferencing pointer when xfrm_policy_lookup_bytype returns an error. Fixes: 63b21caba17e ("xfrm: introduce forwarding of ICMP Error messages") Reported-by: Dan Carpenter Closes: https://lore.kernel.org/kernel-janitors/f6ef0d0d-96de-4e01-9dc3-c1b3a6338653@moroto.mountain/ Signed-off-by: Antony Antony Signed-off-by: Steffen Klassert --- net/xfrm/xfrm_policy.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/net/xfrm/xfrm_policy.c b/net/xfrm/xfrm_policy.c index 6affe5cd85d8..53d8fabfa685 100644 --- a/net/xfrm/xfrm_policy.c +++ b/net/xfrm/xfrm_policy.c @@ -3593,6 +3593,8 @@ xfrm_policy *xfrm_in_fwd_icmp(struct sk_buff *skb, return pol; pol = xfrm_policy_lookup(net, &fl1, family, XFRM_POLICY_FWD, if_id); + if (IS_ERR(pol)) + pol = NULL; } return pol; -- cgit v1.2.3 From 29b08729abf5fcf1c3844de34ddfcc5e6d7a11a4 Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Tue, 9 Apr 2024 19:14:44 +0300 Subject: auxdisplay: charlcd: Add missing MODULE_DESCRIPTION() The modpost script is not happy WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/auxdisplay/charlcd.o because there is a missing module description. Add it to the module. Reviewed-by: Geert Uytterhoeven Signed-off-by: Andy Shevchenko --- drivers/auxdisplay/charlcd.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/auxdisplay/charlcd.c b/drivers/auxdisplay/charlcd.c index 6d309e4971b6..5df019720c56 100644 --- a/drivers/auxdisplay/charlcd.c +++ b/drivers/auxdisplay/charlcd.c @@ -678,4 +678,5 @@ int charlcd_unregister(struct charlcd *lcd) } EXPORT_SYMBOL_GPL(charlcd_unregister); +MODULE_DESCRIPTION("Character LCD core support"); MODULE_LICENSE("GPL"); -- cgit v1.2.3 From 93ee235f55d3e1c881e766a320cedcad0b9aca42 Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Tue, 9 Apr 2024 20:39:21 +0300 Subject: auxdisplay: charlcd: Don't rebuild when CONFIG_PANEL_BOOT_MESSAGE=y When CONFIG_PANEL_BOOT_MESSAGE=y the module still includes the generated header and gets rebuilt even if it doesn't use anything from that header. Include generated header conditionally to avoid unnecessary rebuilds. Reviewed-by: Geert Uytterhoeven Signed-off-by: Andy Shevchenko --- drivers/auxdisplay/charlcd.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/auxdisplay/charlcd.c b/drivers/auxdisplay/charlcd.c index 5df019720c56..bb9463814454 100644 --- a/drivers/auxdisplay/charlcd.c +++ b/drivers/auxdisplay/charlcd.c @@ -17,7 +17,9 @@ #include #include +#ifndef CONFIG_PANEL_BOOT_MESSAGE #include +#endif #include "charlcd.h" -- cgit v1.2.3 From eefb831d2e4dd58d58002a2ef75ff989e073230d Mon Sep 17 00:00:00 2001 From: Stefan Binding Date: Thu, 11 Apr 2024 15:26:48 +0100 Subject: ASoC: cs35l41: Update DSP1RX5/6 Sources for DSP config Currently, all ASoC systems are set to use VPMON for DSP1RX5_SRC, however, this is required only for internal boost systems. External boost systems require VBSTMON instead of VPMON to be the input to DSP1RX5_SRC. Shared Boost Active acts like Internal boost (requires VPMON). Shared Boost Passive acts like External boost (requires VBSTMON) All systems require DSP1RX6_SRC to be set to VBSTMON. Signed-off-by: Stefan Binding Reviewed-by: Richard Fitzgerald Link: https://msgid.link/r/20240411142648.650921-1-sbinding@opensource.cirrus.com Signed-off-by: Mark Brown --- sound/soc/codecs/cs35l41.c | 26 ++++++++++++++++++++------ 1 file changed, 20 insertions(+), 6 deletions(-) diff --git a/sound/soc/codecs/cs35l41.c b/sound/soc/codecs/cs35l41.c index dfb4ce53491b..f8e57a2fc3e3 100644 --- a/sound/soc/codecs/cs35l41.c +++ b/sound/soc/codecs/cs35l41.c @@ -1094,6 +1094,7 @@ static int cs35l41_handle_pdata(struct device *dev, struct cs35l41_hw_cfg *hw_cf static int cs35l41_dsp_init(struct cs35l41_private *cs35l41) { struct wm_adsp *dsp; + uint32_t dsp1rx5_src; int ret; dsp = &cs35l41->dsp; @@ -1113,16 +1114,29 @@ static int cs35l41_dsp_init(struct cs35l41_private *cs35l41) return ret; } - ret = regmap_write(cs35l41->regmap, CS35L41_DSP1_RX5_SRC, - CS35L41_INPUT_SRC_VPMON); + switch (cs35l41->hw_cfg.bst_type) { + case CS35L41_INT_BOOST: + case CS35L41_SHD_BOOST_ACTV: + dsp1rx5_src = CS35L41_INPUT_SRC_VPMON; + break; + case CS35L41_EXT_BOOST: + case CS35L41_SHD_BOOST_PASS: + dsp1rx5_src = CS35L41_INPUT_SRC_VBSTMON; + break; + default: + dev_err(cs35l41->dev, "wm_halo_init failed - Invalid Boost Type: %d\n", + cs35l41->hw_cfg.bst_type); + goto err_dsp; + } + + ret = regmap_write(cs35l41->regmap, CS35L41_DSP1_RX5_SRC, dsp1rx5_src); if (ret < 0) { - dev_err(cs35l41->dev, "Write INPUT_SRC_VPMON failed: %d\n", ret); + dev_err(cs35l41->dev, "Write DSP1RX5_SRC: %d failed: %d\n", dsp1rx5_src, ret); goto err_dsp; } - ret = regmap_write(cs35l41->regmap, CS35L41_DSP1_RX6_SRC, - CS35L41_INPUT_SRC_CLASSH); + ret = regmap_write(cs35l41->regmap, CS35L41_DSP1_RX6_SRC, CS35L41_INPUT_SRC_VBSTMON); if (ret < 0) { - dev_err(cs35l41->dev, "Write INPUT_SRC_CLASSH failed: %d\n", ret); + dev_err(cs35l41->dev, "Write CS35L41_INPUT_SRC_VBSTMON failed: %d\n", ret); goto err_dsp; } ret = regmap_write(cs35l41->regmap, CS35L41_DSP1_RX7_SRC, -- cgit v1.2.3 From 0bc2e80b9be51712b19e919db5abc97a418f8292 Mon Sep 17 00:00:00 2001 From: Yi Zhang Date: Wed, 10 Apr 2024 08:57:14 +0800 Subject: nvme: fix warn output about shared namespaces without CONFIG_NVME_MULTIPATH Move the stray '.' that is currently at the end of the line after newline '\n' to before newline character which is the right position. Fixes: ce8d78616a6b ("nvme: warn about shared namespaces without CONFIG_NVME_MULTIPATH") Signed-off-by: Yi Zhang Reviewed-by: Chaitanya Kulkarni Signed-off-by: Keith Busch --- drivers/nvme/host/core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c index 27281a9a8951..e4bec200ebeb 100644 --- a/drivers/nvme/host/core.c +++ b/drivers/nvme/host/core.c @@ -3681,7 +3681,7 @@ static int nvme_init_ns_head(struct nvme_ns *ns, struct nvme_ns_info *info) "Found shared namespace %d, but multipathing not supported.\n", info->nsid); dev_warn_once(ctrl->device, - "Support for shared namespaces without CONFIG_NVME_MULTIPATH is deprecated and will be removed in Linux 6.0\n."); + "Support for shared namespaces without CONFIG_NVME_MULTIPATH is deprecated and will be removed in Linux 6.0.\n"); } } -- cgit v1.2.3 From 0064db9ce4aa7cc794e6f4aed60dee0f94fc9bcf Mon Sep 17 00:00:00 2001 From: David Lechner Date: Fri, 12 Apr 2024 17:52:48 -0500 Subject: spi: axi-spi-engine: fix version format string The version format string in the AXI SPI Engine driver was probably intended to print the version number in the same format as the DT compatible string (e.g. 1.00.a). However, the version just uses semantic versioning so formatting the patch number as a character is not correct and would result in printing control characters for patch numbers less than 32. Fixes: b1353d1c1d45 ("spi: Add Analog Devices AXI SPI Engine controller support") Signed-off-by: David Lechner Link: https://lore.kernel.org/r/20240412-axi-spi-engine-version-printf-v1-1-95e1e842c1a6@baylibre.com Signed-off-by: Mark Brown --- drivers/spi/spi-axi-spi-engine.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/spi/spi-axi-spi-engine.c b/drivers/spi/spi-axi-spi-engine.c index 7cc219d78551..e358ac5b4509 100644 --- a/drivers/spi/spi-axi-spi-engine.c +++ b/drivers/spi/spi-axi-spi-engine.c @@ -623,7 +623,7 @@ static int spi_engine_probe(struct platform_device *pdev) version = readl(spi_engine->base + ADI_AXI_REG_VERSION); if (ADI_AXI_PCORE_VER_MAJOR(version) != 1) { - dev_err(&pdev->dev, "Unsupported peripheral version %u.%u.%c\n", + dev_err(&pdev->dev, "Unsupported peripheral version %u.%u.%u\n", ADI_AXI_PCORE_VER_MAJOR(version), ADI_AXI_PCORE_VER_MINOR(version), ADI_AXI_PCORE_VER_PATCH(version)); -- cgit v1.2.3 From 7e91ed763dc07437777bd012af7a2bd4493731ff Mon Sep 17 00:00:00 2001 From: Jernej Skrabec Date: Fri, 13 Oct 2023 20:17:12 +0200 Subject: clk: sunxi-ng: h6: Reparent CPUX during PLL CPUX rate change While PLL CPUX clock rate change when CPU is running from it works in vast majority of cases, now and then it causes instability. This leads to system crashes and other undefined behaviour. After a lot of testing (30+ hours) while also doing a lot of frequency switches, we can't observe any instability issues anymore when doing reparenting to stable clock like 24 MHz oscillator. Fixes: 524353ea480b ("clk: sunxi-ng: add support for the Allwinner H6 CCU") Reported-by: Chad Wagner Link: https://forum.libreelec.tv/thread/27295-orange-pi-3-lts-freezes/ Tested-by: Chad Wagner Reviewed-by: Chen-Yu Tsai Link: https://lore.kernel.org/r/20231013181712.2128037-1-jernej.skrabec@gmail.com Signed-off-by: Jernej Skrabec --- drivers/clk/sunxi-ng/ccu-sun50i-h6.c | 19 +++++++++++++++++-- 1 file changed, 17 insertions(+), 2 deletions(-) diff --git a/drivers/clk/sunxi-ng/ccu-sun50i-h6.c b/drivers/clk/sunxi-ng/ccu-sun50i-h6.c index 42568c616181..892df807275c 100644 --- a/drivers/clk/sunxi-ng/ccu-sun50i-h6.c +++ b/drivers/clk/sunxi-ng/ccu-sun50i-h6.c @@ -1181,11 +1181,18 @@ static const u32 usb2_clk_regs[] = { SUN50I_H6_USB3_CLK_REG, }; +static struct ccu_mux_nb sun50i_h6_cpu_nb = { + .common = &cpux_clk.common, + .cm = &cpux_clk.mux, + .delay_us = 1, + .bypass_index = 0, /* index of 24 MHz oscillator */ +}; + static int sun50i_h6_ccu_probe(struct platform_device *pdev) { void __iomem *reg; + int i, ret; u32 val; - int i; reg = devm_platform_ioremap_resource(pdev, 0); if (IS_ERR(reg)) @@ -1252,7 +1259,15 @@ static int sun50i_h6_ccu_probe(struct platform_device *pdev) val |= BIT(24); writel(val, reg + SUN50I_H6_HDMI_CEC_CLK_REG); - return devm_sunxi_ccu_probe(&pdev->dev, reg, &sun50i_h6_ccu_desc); + ret = devm_sunxi_ccu_probe(&pdev->dev, reg, &sun50i_h6_ccu_desc); + if (ret) + return ret; + + /* Reparent CPU during PLL CPUX rate changes */ + ccu_mux_notifier_register(pll_cpux_clk.common.hw.clk, + &sun50i_h6_cpu_nb); + + return 0; } static const struct of_device_id sun50i_h6_ccu_ids[] = { -- cgit v1.2.3 From b914ec33b391ec766545a41f0cfc0de3e0b388d7 Mon Sep 17 00:00:00 2001 From: Frank Oltmanns Date: Sun, 10 Mar 2024 14:21:11 +0100 Subject: clk: sunxi-ng: common: Support minimum and maximum rate The Allwinner SoC's typically have an upper and lower limit for their clocks' rates. Up until now, support for that has been implemented separately for each clock type. Implement that functionality in the sunxi-ng's common part making use of the CCF rate liming capabilities, so that it is available for all clock types. Suggested-by: Maxime Ripard Signed-off-by: Frank Oltmanns Cc: stable@vger.kernel.org Reviewed-by: Jernej Skrabec Acked-by: Maxime Ripard Link: https://lore.kernel.org/r/20240310-pinephone-pll-fixes-v4-1-46fc80c83637@oltmanns.dev Signed-off-by: Jernej Skrabec --- drivers/clk/sunxi-ng/ccu_common.c | 19 +++++++++++++++++++ drivers/clk/sunxi-ng/ccu_common.h | 3 +++ 2 files changed, 22 insertions(+) diff --git a/drivers/clk/sunxi-ng/ccu_common.c b/drivers/clk/sunxi-ng/ccu_common.c index 8babce55302f..ac0091b4ce24 100644 --- a/drivers/clk/sunxi-ng/ccu_common.c +++ b/drivers/clk/sunxi-ng/ccu_common.c @@ -44,6 +44,16 @@ bool ccu_is_better_rate(struct ccu_common *common, unsigned long current_rate, unsigned long best_rate) { + unsigned long min_rate, max_rate; + + clk_hw_get_rate_range(&common->hw, &min_rate, &max_rate); + + if (current_rate > max_rate) + return false; + + if (current_rate < min_rate) + return false; + if (common->features & CCU_FEATURE_CLOSEST_RATE) return abs(current_rate - target_rate) < abs(best_rate - target_rate); @@ -122,6 +132,7 @@ static int sunxi_ccu_probe(struct sunxi_ccu *ccu, struct device *dev, for (i = 0; i < desc->hw_clks->num ; i++) { struct clk_hw *hw = desc->hw_clks->hws[i]; + struct ccu_common *common = hw_to_ccu_common(hw); const char *name; if (!hw) @@ -136,6 +147,14 @@ static int sunxi_ccu_probe(struct sunxi_ccu *ccu, struct device *dev, pr_err("Couldn't register clock %d - %s\n", i, name); goto err_clk_unreg; } + + if (common->max_rate) + clk_hw_set_rate_range(hw, common->min_rate, + common->max_rate); + else + WARN(common->min_rate, + "No max_rate, ignoring min_rate of clock %d - %s\n", + i, name); } ret = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, diff --git a/drivers/clk/sunxi-ng/ccu_common.h b/drivers/clk/sunxi-ng/ccu_common.h index 942a72c09437..329734f8cf42 100644 --- a/drivers/clk/sunxi-ng/ccu_common.h +++ b/drivers/clk/sunxi-ng/ccu_common.h @@ -31,6 +31,9 @@ struct ccu_common { u16 lock_reg; u32 prediv; + unsigned long min_rate; + unsigned long max_rate; + unsigned long features; spinlock_t *lock; struct clk_hw hw; -- cgit v1.2.3 From 69f16d9b789821183d342719d2ebd4a5ac7178bc Mon Sep 17 00:00:00 2001 From: Frank Oltmanns Date: Sun, 10 Mar 2024 14:21:12 +0100 Subject: clk: sunxi-ng: a64: Set minimum and maximum rate for PLL-MIPI When the Allwinner A64's TCON0 searches the ideal rate for the connected panel, it may happen that it requests a rate from its parent PLL-MIPI which PLL-MIPI does not support. This happens for example on the Olimex TERES-I laptop where TCON0 requests PLL-MIPI to change to a rate of several GHz which causes the panel to stay blank. It also happens on the pinephone where a rate of less than 500 MHz is requested which causes instabilities on some phones. Set the minimum and maximum rate of Allwinner A64's PLL-MIPI according to the Allwinner User Manual. Fixes: ca1170b69968 ("clk: sunxi-ng: a64: force select PLL_MIPI in TCON0 mux") Reported-by: Diego Roversi Closes: https://groups.google.com/g/linux-sunxi/c/Rh-Uqqa66bw Tested-by: Diego Roversi Cc: stable@vger.kernel.org Reviewed-by: Maxime Ripard Signed-off-by: Frank Oltmanns Reviewed-by: Jernej Skrabec Link: https://lore.kernel.org/r/20240310-pinephone-pll-fixes-v4-2-46fc80c83637@oltmanns.dev Signed-off-by: Jernej Skrabec --- drivers/clk/sunxi-ng/ccu-sun50i-a64.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/clk/sunxi-ng/ccu-sun50i-a64.c b/drivers/clk/sunxi-ng/ccu-sun50i-a64.c index 8951ffc14ff5..6a4b2b9ef30a 100644 --- a/drivers/clk/sunxi-ng/ccu-sun50i-a64.c +++ b/drivers/clk/sunxi-ng/ccu-sun50i-a64.c @@ -182,6 +182,8 @@ static struct ccu_nkm pll_mipi_clk = { &ccu_nkm_ops, CLK_SET_RATE_UNGATE | CLK_SET_RATE_PARENT), .features = CCU_FEATURE_CLOSEST_RATE, + .min_rate = 500000000, + .max_rate = 1400000000, }, }; -- cgit v1.2.3 From cebfbc89ae2552dbb58cd9b8206a5c8e0e6301e9 Mon Sep 17 00:00:00 2001 From: Jack Yu Date: Mon, 15 Apr 2024 06:27:23 +0000 Subject: ASoC: rt715: add vendor clear control register Add vendor clear control register in readable register's callback function. This prevents an access failure reported in Intel CI tests. Signed-off-by: Jack Yu Closes: https://github.com/thesofproject/linux/issues/4860 Tested-by: Pierre-Louis Bossart Link: https://lore.kernel.org/r/6a103ce9134d49d8b3941172c87a7bd4@realtek.com Signed-off-by: Mark Brown --- sound/soc/codecs/rt715-sdw.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/soc/codecs/rt715-sdw.c b/sound/soc/codecs/rt715-sdw.c index 7e13868ff99f..f012fe0ded6d 100644 --- a/sound/soc/codecs/rt715-sdw.c +++ b/sound/soc/codecs/rt715-sdw.c @@ -111,6 +111,7 @@ static bool rt715_readable_register(struct device *dev, unsigned int reg) case 0x839d: case 0x83a7: case 0x83a9: + case 0x752001: case 0x752039: return true; default: -- cgit v1.2.3 From 7430764f5a85d30314aeef2d5438dff1fb0b1d68 Mon Sep 17 00:00:00 2001 From: Devyn Liu Date: Tue, 16 Apr 2024 09:58:39 +0800 Subject: spi: hisi-kunpeng: Delete the dump interface of data registers in debugfs Due to the reading of FIFO during the dump of data registers in debugfs, if SPI transmission is in progress, it will be affected and may result in transmission failure. Therefore, the dump interface of data registers in debugfs is removed. Fixes: 2b2142f247eb ("spi: hisi-kunpeng: Add debugfs support") Signed-off-by: Devyn Liu Reviewed-by: Jay Fang Link: https://lore.kernel.org/r/20240416015839.3323398-1-liudingyuan@huawei.com Signed-off-by: Mark Brown --- drivers/spi/spi-hisi-kunpeng.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/spi/spi-hisi-kunpeng.c b/drivers/spi/spi-hisi-kunpeng.c index 35ef5e8e2ffd..77e9738e42f6 100644 --- a/drivers/spi/spi-hisi-kunpeng.c +++ b/drivers/spi/spi-hisi-kunpeng.c @@ -151,8 +151,6 @@ static const struct debugfs_reg32 hisi_spi_regs[] = { HISI_SPI_DBGFS_REG("ENR", HISI_SPI_ENR), HISI_SPI_DBGFS_REG("FIFOC", HISI_SPI_FIFOC), HISI_SPI_DBGFS_REG("IMR", HISI_SPI_IMR), - HISI_SPI_DBGFS_REG("DIN", HISI_SPI_DIN), - HISI_SPI_DBGFS_REG("DOUT", HISI_SPI_DOUT), HISI_SPI_DBGFS_REG("SR", HISI_SPI_SR), HISI_SPI_DBGFS_REG("RISR", HISI_SPI_RISR), HISI_SPI_DBGFS_REG("ISR", HISI_SPI_ISR), -- cgit v1.2.3 From 9a039db9273b44427b3daca88173e57596545ec0 Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Wed, 17 Apr 2024 10:58:04 +0300 Subject: ASoC: SOF: Core: Handle error returned by sof_select_ipc_and_paths The patch which fixed the missing remove_late() calls missed a case when sof_select_ipc_and_paths() could return with error and in this case sof_init_environment() would just return with 0. Do not ignore the error code returned by sof_select_ipc_and_paths(). Fixes: 90f8917e7a15 ("ASoC: SOF: Core: Add remove_late() to sof_init_environment failure path") Signed-off-by: Peter Ujfalusi Reviewed-by: Pierre-Louis Bossart Link: https://lore.kernel.org/r/20240417075804.10829-1-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown --- sound/soc/sof/core.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/sound/soc/sof/core.c b/sound/soc/sof/core.c index cc84d4c81be9..238bda5f6b76 100644 --- a/sound/soc/sof/core.c +++ b/sound/soc/sof/core.c @@ -350,7 +350,9 @@ static int sof_init_environment(struct snd_sof_dev *sdev) } ret = sof_select_ipc_and_paths(sdev); - if (!ret && plat_data->ipc_type != base_profile->ipc_type) { + if (ret) { + goto err_machine_check; + } else if (plat_data->ipc_type != base_profile->ipc_type) { /* IPC type changed, re-initialize the ops */ sof_ops_free(sdev); -- cgit v1.2.3 From 4cbb5050bffc49c716381ea2ecb07306dd46f83a Mon Sep 17 00:00:00 2001 From: Amadeusz Sławiński Date: Thu, 18 Apr 2024 16:26:21 +0200 Subject: ASoC: Intel: avs: Set name of control as in topology MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit When creating controls attached to widgets, there are a lot of rules if they get their name prefixed with widget name or not. Due to that controls ended up with weirdly looking names like "ssp0_fe DSP Volume", while topology set it to "DSP Volume". Fix this by setting no_wname_in_kcontrol_name to true in avs topology widgets which disables unwanted behaviour. Fixes: be2b81b519d7 ("ASoC: Intel: avs: Parse control tuples") Signed-off-by: Amadeusz Sławiński Link: https://lore.kernel.org/r/20240418142621.2487478-1-amadeuszx.slawinski@linux.intel.com Signed-off-by: Mark Brown --- sound/soc/intel/avs/topology.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/sound/soc/intel/avs/topology.c b/sound/soc/intel/avs/topology.c index 13061bd1488b..42b42903ae9d 100644 --- a/sound/soc/intel/avs/topology.c +++ b/sound/soc/intel/avs/topology.c @@ -1582,6 +1582,8 @@ static int avs_widget_load(struct snd_soc_component *comp, int index, if (!le32_to_cpu(dw->priv.size)) return 0; + w->no_wname_in_kcontrol_name = true; + if (w->ignore_suspend && !AVS_S0IX_SUPPORTED) { dev_info_once(comp->dev, "Device does not support S0IX, check BIOS settings\n"); w->ignore_suspend = false; -- cgit v1.2.3 From d18ca8635db2f88c17acbdf6412f26d4f6aff414 Mon Sep 17 00:00:00 2001 From: Joao Paulo Goncalves Date: Wed, 17 Apr 2024 15:41:38 -0300 Subject: ASoC: ti: davinci-mcasp: Fix race condition during probe When using davinci-mcasp as CPU DAI with simple-card, there are some conditions that cause simple-card to finish registering a sound card before davinci-mcasp finishes registering all sound components. This creates a non-working sound card from userspace with no problem indication apart from not being able to play/record audio on a PCM stream. The issue arises during simultaneous probe execution of both drivers. Specifically, the simple-card driver, awaiting a CPU DAI, proceeds as soon as davinci-mcasp registers its DAI. However, this process can lead to the client mutex lock (client_mutex in soc-core.c) being held or davinci-mcasp being preempted before PCM DMA registration on davinci-mcasp finishes. This situation occurs when the probes of both drivers run concurrently. Below is the code path for this condition. To solve the issue, defer davinci-mcasp CPU DAI registration to the last step in the audio part of it. This way, simple-card CPU DAI parsing will be deferred until all audio components are registered. Fail Code Path: simple-card.c: probe starts simple-card.c: simple_dai_link_of: simple_parse_node(..,cpu,..) returns EPROBE_DEFER, no CPU DAI yet davinci-mcasp.c: probe starts davinci-mcasp.c: devm_snd_soc_register_component() register CPU DAI simple-card.c: probes again, finish CPU DAI parsing and call devm_snd_soc_register_card() simple-card.c: finish probe davinci-mcasp.c: *dma_pcm_platform_register() register PCM DMA davinci-mcasp.c: probe finish Cc: stable@vger.kernel.org Fixes: 9fbd58cf4ab0 ("ASoC: davinci-mcasp: Choose PCM driver based on configured DMA controller") Signed-off-by: Joao Paulo Goncalves Acked-by: Peter Ujfalusi Reviewed-by: Jai Luthra Link: https://lore.kernel.org/r/20240417184138.1104774-1-jpaulo.silvagoncalves@gmail.com Signed-off-by: Mark Brown --- sound/soc/ti/davinci-mcasp.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/sound/soc/ti/davinci-mcasp.c b/sound/soc/ti/davinci-mcasp.c index b892d66f7847..1e760c315521 100644 --- a/sound/soc/ti/davinci-mcasp.c +++ b/sound/soc/ti/davinci-mcasp.c @@ -2417,12 +2417,6 @@ static int davinci_mcasp_probe(struct platform_device *pdev) mcasp_reparent_fck(pdev); - ret = devm_snd_soc_register_component(&pdev->dev, &davinci_mcasp_component, - &davinci_mcasp_dai[mcasp->op_mode], 1); - - if (ret != 0) - goto err; - ret = davinci_mcasp_get_dma_type(mcasp); switch (ret) { case PCM_EDMA: @@ -2449,6 +2443,12 @@ static int davinci_mcasp_probe(struct platform_device *pdev) goto err; } + ret = devm_snd_soc_register_component(&pdev->dev, &davinci_mcasp_component, + &davinci_mcasp_dai[mcasp->op_mode], 1); + + if (ret != 0) + goto err; + no_audio: ret = davinci_mcasp_init_gpiochip(mcasp); if (ret) { -- cgit v1.2.3 From 32ac501957e5f68fe0e4bf88fb4db75cfb8f6566 Mon Sep 17 00:00:00 2001 From: Srinivas Kandagatla Date: Fri, 19 Apr 2024 15:00:12 +0100 Subject: ASoC: codecs: wsa881x: set clk_stop_mode1 flag WSA881x codecs do not retain the state while clock is stopped, so mark this with clk_stop_mode1 flag. Fixes: a0aab9e1404a ("ASoC: codecs: add wsa881x amplifier support") Signed-off-by: Srinivas Kandagatla Link: https://lore.kernel.org/r/20240419140012.91384-1-srinivas.kandagatla@linaro.org Signed-off-by: Mark Brown --- sound/soc/codecs/wsa881x.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/soc/codecs/wsa881x.c b/sound/soc/codecs/wsa881x.c index 3c025dabaf7a..1253695bebd8 100644 --- a/sound/soc/codecs/wsa881x.c +++ b/sound/soc/codecs/wsa881x.c @@ -1155,6 +1155,7 @@ static int wsa881x_probe(struct sdw_slave *pdev, pdev->prop.sink_ports = GENMASK(WSA881X_MAX_SWR_PORTS, 0); pdev->prop.sink_dpn_prop = wsa_sink_dpn_prop; pdev->prop.scp_int1_mask = SDW_SCP_INT1_BUS_CLASH | SDW_SCP_INT1_PARITY; + pdev->prop.clk_stop_mode1 = true; gpiod_direction_output(wsa881x->sd_n, !wsa881x->sd_n_val); wsa881x->regmap = devm_regmap_init_sdw(pdev, &wsa881x_regmap_config); -- cgit v1.2.3 From 819fe8c96a5172dfd960e5945e8f00f8fed32953 Mon Sep 17 00:00:00 2001 From: Volodymyr Babchuk Date: Fri, 12 Apr 2024 19:03:25 +0000 Subject: arm64: dts: qcom: sa8155p-adp: fix SDHC2 CD pin configuration There are two issues with SDHC2 configuration for SA8155P-ADP, which prevent use of SDHC2 and causes issues with ethernet: - Card Detect pin for SHDC2 on SA8155P-ADP is connected to gpio4 of PMM8155AU_1, not to SoC itself. SoC's gpio4 is used for DWMAC TX. If sdhc driver probes after dwmac driver, it reconfigures gpio4 and this breaks Ethernet MAC. - pinctrl configuration mentions gpio96 as CD pin. It seems it was copied from some SM8150 example, because as mentioned above, correct CD pin is gpio4 on PMM8155AU_1. This patch fixes both mentioned issues by providing correct pin handle and pinctrl configuration. Fixes: 0deb2624e2d0 ("arm64: dts: qcom: sa8155p-adp: Add support for uSD card") Cc: stable@vger.kernel.org Signed-off-by: Volodymyr Babchuk Reviewed-by: Stephan Gerhold Link: https://lore.kernel.org/r/20240412190310.1647893-1-volodymyr_babchuk@epam.com Signed-off-by: Bjorn Andersson --- arch/arm64/boot/dts/qcom/sa8155p-adp.dts | 30 +++++++++++++----------------- 1 file changed, 13 insertions(+), 17 deletions(-) diff --git a/arch/arm64/boot/dts/qcom/sa8155p-adp.dts b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts index 5e4287f8c8cd..b2cf2c988336 100644 --- a/arch/arm64/boot/dts/qcom/sa8155p-adp.dts +++ b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts @@ -367,6 +367,16 @@ }; }; +&pmm8155au_1_gpios { + pmm8155au_1_sdc2_cd: sdc2-cd-default-state { + pins = "gpio4"; + function = "normal"; + input-enable; + bias-pull-up; + power-source = <0>; + }; +}; + &qupv3_id_1 { status = "okay"; }; @@ -384,10 +394,10 @@ &sdhc_2 { status = "okay"; - cd-gpios = <&tlmm 4 GPIO_ACTIVE_LOW>; + cd-gpios = <&pmm8155au_1_gpios 4 GPIO_ACTIVE_LOW>; pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sdc2_on>; - pinctrl-1 = <&sdc2_off>; + pinctrl-0 = <&sdc2_on &pmm8155au_1_sdc2_cd>; + pinctrl-1 = <&sdc2_off &pmm8155au_1_sdc2_cd>; vqmmc-supply = <&vreg_l13c_2p96>; /* IO line power */ vmmc-supply = <&vreg_l17a_2p96>; /* Card power line */ bus-width = <4>; @@ -505,13 +515,6 @@ bias-pull-up; /* pull up */ drive-strength = <16>; /* 16 MA */ }; - - sd-cd-pins { - pins = "gpio96"; - function = "gpio"; - bias-pull-up; /* pull up */ - drive-strength = <2>; /* 2 MA */ - }; }; sdc2_off: sdc2-off-state { @@ -532,13 +535,6 @@ bias-pull-up; /* pull up */ drive-strength = <2>; /* 2 MA */ }; - - sd-cd-pins { - pins = "gpio96"; - function = "gpio"; - bias-pull-up; /* pull up */ - drive-strength = <2>; /* 2 MA */ - }; }; usb2phy_ac_en1_default: usb2phy-ac-en1-default-state { -- cgit v1.2.3 From 843c3280686fc1a83d89ee1e0b5599c9f6b09d0c Mon Sep 17 00:00:00 2001 From: Claudio Imbrenda Date: Tue, 16 Apr 2024 13:42:19 +0200 Subject: s390/mm: Fix storage key clearing for guest huge pages The function __storage_key_init_range() expects the end address to be the first byte outside the range to be initialized. I.e. end - start should be the size of the area to be initialized. The current code works because __storage_key_init_range() will still loop over every page in the range, but it is slower than using sske_frame(). Fixes: 964c2c05c9f3 ("s390/mm: Clear huge page storage keys on enable_skey") Reviewed-by: Heiko Carstens Signed-off-by: Claudio Imbrenda Link: https://lore.kernel.org/r/20240416114220.28489-2-imbrenda@linux.ibm.com Signed-off-by: Alexander Gordeev --- arch/s390/mm/gmap.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/s390/mm/gmap.c b/arch/s390/mm/gmap.c index 094b43b121cd..12d22a7fa32f 100644 --- a/arch/s390/mm/gmap.c +++ b/arch/s390/mm/gmap.c @@ -2661,7 +2661,7 @@ static int __s390_enable_skey_hugetlb(pte_t *pte, unsigned long addr, return 0; start = pmd_val(*pmd) & HPAGE_MASK; - end = start + HPAGE_SIZE - 1; + end = start + HPAGE_SIZE; __storage_key_init_range(start, end); set_bit(PG_arch_1, &page->flags); cond_resched(); -- cgit v1.2.3 From 412050af2ea39407fe43324b0be4ab641530ce88 Mon Sep 17 00:00:00 2001 From: Claudio Imbrenda Date: Tue, 16 Apr 2024 13:42:20 +0200 Subject: s390/mm: Fix clearing storage keys for huge pages The function __storage_key_init_range() expects the end address to be the first byte outside the range to be initialized. I.e. end - start should be the size of the area to be initialized. The current code works because __storage_key_init_range() will still loop over every page in the range, but it is slower than using sske_frame(). Fixes: 3afdfca69870 ("s390/mm: Clear skeys for newly mapped huge guest pmds") Reviewed-by: Heiko Carstens Signed-off-by: Claudio Imbrenda Link: https://lore.kernel.org/r/20240416114220.28489-3-imbrenda@linux.ibm.com Signed-off-by: Alexander Gordeev --- arch/s390/mm/hugetlbpage.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/s390/mm/hugetlbpage.c b/arch/s390/mm/hugetlbpage.c index c2e8242bd15d..dc3db86e13ff 100644 --- a/arch/s390/mm/hugetlbpage.c +++ b/arch/s390/mm/hugetlbpage.c @@ -139,7 +139,7 @@ static void clear_huge_pte_skeys(struct mm_struct *mm, unsigned long rste) } if (!test_and_set_bit(PG_arch_1, &page->flags)) - __storage_key_init_range(paddr, paddr + size - 1); + __storage_key_init_range(paddr, paddr + size); } void __set_huge_pte_at(struct mm_struct *mm, unsigned long addr, -- cgit v1.2.3 From 784354349d2c988590c63a5a001ca37b2a6d4da1 Mon Sep 17 00:00:00 2001 From: Nayna Jain Date: Wed, 17 Apr 2024 23:12:30 -0400 Subject: powerpc/pseries: make max polling consistent for longer H_CALLs Currently, plpks_confirm_object_flushed() function polls for 5msec in total instead of 5sec. Keep max polling time consistent for all the H_CALLs, which take longer than expected, to be 5sec. Also, make use of fsleep() everywhere to insert delay. Reported-by: Nageswara R Sastry Fixes: 2454a7af0f2a ("powerpc/pseries: define driver for Platform KeyStore") Signed-off-by: Nayna Jain Tested-by: Nageswara R Sastry Reviewed-by: Andrew Donnellan Signed-off-by: Michael Ellerman Link: https://msgid.link/20240418031230.170954-1-nayna@linux.ibm.com --- arch/powerpc/include/asm/plpks.h | 5 ++--- arch/powerpc/platforms/pseries/plpks.c | 10 +++++----- 2 files changed, 7 insertions(+), 8 deletions(-) diff --git a/arch/powerpc/include/asm/plpks.h b/arch/powerpc/include/asm/plpks.h index 23b77027c916..7a84069759b0 100644 --- a/arch/powerpc/include/asm/plpks.h +++ b/arch/powerpc/include/asm/plpks.h @@ -44,9 +44,8 @@ #define PLPKS_MAX_DATA_SIZE 4000 // Timeouts for PLPKS operations -#define PLPKS_MAX_TIMEOUT 5000 // msec -#define PLPKS_FLUSH_SLEEP 10 // msec -#define PLPKS_FLUSH_SLEEP_RANGE 400 +#define PLPKS_MAX_TIMEOUT (5 * USEC_PER_SEC) +#define PLPKS_FLUSH_SLEEP 10000 // usec struct plpks_var { char *component; diff --git a/arch/powerpc/platforms/pseries/plpks.c b/arch/powerpc/platforms/pseries/plpks.c index febe18f251d0..4a595493d28a 100644 --- a/arch/powerpc/platforms/pseries/plpks.c +++ b/arch/powerpc/platforms/pseries/plpks.c @@ -415,8 +415,7 @@ static int plpks_confirm_object_flushed(struct label *label, break; } - usleep_range(PLPKS_FLUSH_SLEEP, - PLPKS_FLUSH_SLEEP + PLPKS_FLUSH_SLEEP_RANGE); + fsleep(PLPKS_FLUSH_SLEEP); timeout = timeout + PLPKS_FLUSH_SLEEP; } while (timeout < PLPKS_MAX_TIMEOUT); @@ -464,9 +463,10 @@ int plpks_signed_update_var(struct plpks_var *var, u64 flags) continuetoken = retbuf[0]; if (pseries_status_to_err(rc) == -EBUSY) { - int delay_ms = get_longbusy_msecs(rc); - mdelay(delay_ms); - timeout += delay_ms; + int delay_us = get_longbusy_msecs(rc) * 1000; + + fsleep(delay_us); + timeout += delay_us; } rc = pseries_status_to_err(rc); } while (rc == -EBUSY && timeout < PLPKS_MAX_TIMEOUT); -- cgit v1.2.3 From aef8acd79f363ced098cd3bcde0a5978a52607ad Mon Sep 17 00:00:00 2001 From: Amir Goldstein Date: Mon, 22 Apr 2024 09:40:08 +0300 Subject: fuse: verify zero padding in fuse_backing_map To allow us extending the interface in the future. Fixes: 44350256ab94 ("fuse: implement ioctls to manage backing files") Signed-off-by: Amir Goldstein Signed-off-by: Miklos Szeredi --- fs/fuse/passthrough.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/fuse/passthrough.c b/fs/fuse/passthrough.c index 1567f0323858..9666d13884ce 100644 --- a/fs/fuse/passthrough.c +++ b/fs/fuse/passthrough.c @@ -225,7 +225,7 @@ int fuse_backing_open(struct fuse_conn *fc, struct fuse_backing_map *map) goto out; res = -EINVAL; - if (map->flags) + if (map->flags || map->padding) goto out; file = fget(map->fd); -- cgit v1.2.3 From f2602fba4723e408380eb9a56e921d36a1ae21f8 Mon Sep 17 00:00:00 2001 From: Simon Trimmer Date: Mon, 22 Apr 2024 11:32:11 +0100 Subject: ASoC: cs35l56: Avoid static analysis warning of uninitialised variable Static checkers complain that the silicon_uid variable passed by pointer to cs35l56_read_silicon_uid() could later be used uninitialised when calling cs_amp_get_efi_calibration_data(). cs35l56_read_silicon_uid() must have succeeded to call cs_amp_get_efi_calibration_data() and that would have populated the variable. However, initialise the value so we are not haunted by it forevermore. Signed-off-by: Simon Trimmer Fixes: e1830f66f6c6 ("ASoC: cs35l56: Add helper functions for amp calibration") Signed-off-by: Richard Fitzgerald Link: https://lore.kernel.org/r/20240422103211.236063-1-rf@opensource.cirrus.com Signed-off-by: Mark Brown --- sound/soc/codecs/cs35l56-shared.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/codecs/cs35l56-shared.c b/sound/soc/codecs/cs35l56-shared.c index ec1d95e57061..fd02b621da52 100644 --- a/sound/soc/codecs/cs35l56-shared.c +++ b/sound/soc/codecs/cs35l56-shared.c @@ -706,7 +706,7 @@ EXPORT_SYMBOL_NS_GPL(cs35l56_calibration_controls, SND_SOC_CS35L56_SHARED); int cs35l56_get_calibration(struct cs35l56_base *cs35l56_base) { - u64 silicon_uid; + u64 silicon_uid = 0; int ret; /* Driver can't apply calibration to a secured part, so skip */ -- cgit v1.2.3 From 49a940dbdc3107fecd5e6d3063dc07128177e058 Mon Sep 17 00:00:00 2001 From: Gaurav Batra Date: Mon, 22 Apr 2024 15:51:41 -0500 Subject: powerpc/pseries/iommu: LPAR panics during boot up with a frozen PE At the time of LPAR boot up, partition firmware provides Open Firmware property ibm,dma-window for the PE. This property is provided on the PCI bus the PE is attached to. There are execptions where the partition firmware might not provide this property for the PE at the time of LPAR boot up. One of the scenario is where the firmware has frozen the PE due to some error condition. This PE is frozen for 24 hours or unless the whole system is reinitialized. Within this time frame, if the LPAR is booted, the frozen PE will be presented to the LPAR but ibm,dma-window property could be missing. Today, under these circumstances, the LPAR oopses with NULL pointer dereference, when configuring the PCI bus the PE is attached to. BUG: Kernel NULL pointer dereference on read at 0x000000c8 Faulting instruction address: 0xc0000000001024c0 Oops: Kernel access of bad area, sig: 7 [#1] LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA pSeries Modules linked in: Supported: Yes CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.4.0-150600.9-default #1 Hardware name: IBM,9043-MRX POWER10 (raw) 0x800200 0xf000006 of:IBM,FW1060.00 (NM1060_023) hv:phyp pSeries NIP: c0000000001024c0 LR: c0000000001024b0 CTR: c000000000102450 REGS: c0000000037db5c0 TRAP: 0300 Not tainted (6.4.0-150600.9-default) MSR: 8000000002009033 CR: 28000822 XER: 00000000 CFAR: c00000000010254c DAR: 00000000000000c8 DSISR: 00080000 IRQMASK: 0 ... NIP [c0000000001024c0] pci_dma_bus_setup_pSeriesLP+0x70/0x2a0 LR [c0000000001024b0] pci_dma_bus_setup_pSeriesLP+0x60/0x2a0 Call Trace: pci_dma_bus_setup_pSeriesLP+0x60/0x2a0 (unreliable) pcibios_setup_bus_self+0x1c0/0x370 __of_scan_bus+0x2f8/0x330 pcibios_scan_phb+0x280/0x3d0 pcibios_init+0x88/0x12c do_one_initcall+0x60/0x320 kernel_init_freeable+0x344/0x3e4 kernel_init+0x34/0x1d0 ret_from_kernel_user_thread+0x14/0x1c Fixes: b1fc44eaa9ba ("pseries/iommu/ddw: Fix kdump to work in absence of ibm,dma-window") Signed-off-by: Gaurav Batra Signed-off-by: Michael Ellerman Link: https://msgid.link/20240422205141.10662-1-gbatra@linux.ibm.com --- arch/powerpc/platforms/pseries/iommu.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/arch/powerpc/platforms/pseries/iommu.c b/arch/powerpc/platforms/pseries/iommu.c index e8c4129697b1..b1e6d275cda9 100644 --- a/arch/powerpc/platforms/pseries/iommu.c +++ b/arch/powerpc/platforms/pseries/iommu.c @@ -786,8 +786,16 @@ static void pci_dma_bus_setup_pSeriesLP(struct pci_bus *bus) * parent bus. During reboot, there will be ibm,dma-window property to * define DMA window. For kdump, there will at least be default window or DDW * or both. + * There is an exception to the above. In case the PE goes into frozen + * state, firmware may not provide ibm,dma-window property at the time + * of LPAR boot up. */ + if (!pdn) { + pr_debug(" no ibm,dma-window property !\n"); + return; + } + ppci = PCI_DN(pdn); pr_debug(" parent is %pOF, iommu_table: 0x%p\n", -- cgit v1.2.3 From bda16500dd0b05e2e047093b36cbe0873c95aeae Mon Sep 17 00:00:00 2001 From: Jack Yu Date: Tue, 23 Apr 2024 06:59:35 +0000 Subject: ASoC: rt715-sdca: volume step modification Volume step (dB/step) modification to fix format error which shown in amixer control. Signed-off-by: Jack Yu Link: https://lore.kernel.org/r/b1f546ad16dc4c7abb7daa7396e8345c@realtek.com Signed-off-by: Mark Brown --- sound/soc/codecs/rt715-sdca.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/sound/soc/codecs/rt715-sdca.c b/sound/soc/codecs/rt715-sdca.c index 3fb7b9adb61d..bc3579203c7a 100644 --- a/sound/soc/codecs/rt715-sdca.c +++ b/sound/soc/codecs/rt715-sdca.c @@ -316,7 +316,7 @@ static int rt715_sdca_set_amp_gain_8ch_get(struct snd_kcontrol *kcontrol, return 0; } -static const DECLARE_TLV_DB_SCALE(in_vol_tlv, -17625, 375, 0); +static const DECLARE_TLV_DB_SCALE(in_vol_tlv, -1725, 75, 0); static const DECLARE_TLV_DB_SCALE(mic_vol_tlv, 0, 1000, 0); static int rt715_sdca_get_volsw(struct snd_kcontrol *kcontrol, @@ -477,7 +477,7 @@ static const struct snd_kcontrol_new rt715_sdca_snd_controls[] = { RT715_SDCA_FU_VOL_CTRL, CH_01), SDW_SDCA_CTL(FUN_MIC_ARRAY, RT715_SDCA_FU_ADC7_27_VOL, RT715_SDCA_FU_VOL_CTRL, CH_02), - 0x2f, 0x7f, 0, + 0x2f, 0x3f, 0, rt715_sdca_set_amp_gain_get, rt715_sdca_set_amp_gain_put, in_vol_tlv), RT715_SDCA_EXT_TLV("FU02 Capture Volume", @@ -485,13 +485,13 @@ static const struct snd_kcontrol_new rt715_sdca_snd_controls[] = { RT715_SDCA_FU_VOL_CTRL, CH_01), rt715_sdca_set_amp_gain_4ch_get, rt715_sdca_set_amp_gain_4ch_put, - in_vol_tlv, 4, 0x7f), + in_vol_tlv, 4, 0x3f), RT715_SDCA_EXT_TLV("FU06 Capture Volume", SDW_SDCA_CTL(FUN_MIC_ARRAY, RT715_SDCA_FU_ADC10_11_VOL, RT715_SDCA_FU_VOL_CTRL, CH_01), rt715_sdca_set_amp_gain_4ch_get, rt715_sdca_set_amp_gain_4ch_put, - in_vol_tlv, 4, 0x7f), + in_vol_tlv, 4, 0x3f), /* MIC Boost Control */ RT715_SDCA_BOOST_EXT_TLV("FU0E Boost", SDW_SDCA_CTL(FUN_MIC_ARRAY, RT715_SDCA_FU_DMIC_GAIN_EN, -- cgit v1.2.3 From 24729b307eefcd7c476065cd7351c1a018082c19 Mon Sep 17 00:00:00 2001 From: Wesley Cheng Date: Mon, 8 Apr 2024 18:40:59 -0700 Subject: usb: gadget: f_fs: Fix race between aio_cancel() and AIO request complete FFS based applications can utilize the aio_cancel() callback to dequeue pending USB requests submitted to the UDC. There is a scenario where the FFS application issues an AIO cancel call, while the UDC is handling a soft disconnect. For a DWC3 based implementation, the callstack looks like the following: DWC3 Gadget FFS Application dwc3_gadget_soft_disconnect() ... --> dwc3_stop_active_transfers() --> dwc3_gadget_giveback(-ESHUTDOWN) --> ffs_epfile_async_io_complete() ffs_aio_cancel() --> usb_ep_free_request() --> usb_ep_dequeue() There is currently no locking implemented between the AIO completion handler and AIO cancel, so the issue occurs if the completion routine is running in parallel to an AIO cancel call coming from the FFS application. As the completion call frees the USB request (io_data->req) the FFS application is also referencing it for the usb_ep_dequeue() call. This can lead to accessing a stale/hanging pointer. commit b566d38857fc ("usb: gadget: f_fs: use io_data->status consistently") relocated the usb_ep_free_request() into ffs_epfile_async_io_complete(). However, in order to properly implement locking to mitigate this issue, the spinlock can't be added to ffs_epfile_async_io_complete(), as usb_ep_dequeue() (if successfully dequeuing a USB request) will call the function driver's completion handler in the same context. Hence, leading into a deadlock. Fix this issue by moving the usb_ep_free_request() back to ffs_user_copy_worker(), and ensuring that it explicitly sets io_data->req to NULL after freeing it within the ffs->eps_lock. This resolves the race condition above, as the ffs_aio_cancel() routine will not continue attempting to dequeue a request that has already been freed, or the ffs_user_copy_work() not freeing the USB request until the AIO cancel is done referencing it. This fix depends on commit b566d38857fc ("usb: gadget: f_fs: use io_data->status consistently") Fixes: 2e4c7553cd6f ("usb: gadget: f_fs: add aio support") Cc: stable # b566d38857fc ("usb: gadget: f_fs: use io_data->status consistently") Signed-off-by: Wesley Cheng Link: https://lore.kernel.org/r/20240409014059.6740-1-quic_wcheng@quicinc.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/function/f_fs.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/usb/gadget/function/f_fs.c b/drivers/usb/gadget/function/f_fs.c index f855f1fc8e5e..aa80c2a6b8e0 100644 --- a/drivers/usb/gadget/function/f_fs.c +++ b/drivers/usb/gadget/function/f_fs.c @@ -852,6 +852,7 @@ static void ffs_user_copy_worker(struct work_struct *work) work); int ret = io_data->status; bool kiocb_has_eventfd = io_data->kiocb->ki_flags & IOCB_EVENTFD; + unsigned long flags; if (io_data->read && ret > 0) { kthread_use_mm(io_data->mm); @@ -864,6 +865,11 @@ static void ffs_user_copy_worker(struct work_struct *work) if (io_data->ffs->ffs_eventfd && !kiocb_has_eventfd) eventfd_signal(io_data->ffs->ffs_eventfd); + spin_lock_irqsave(&io_data->ffs->eps_lock, flags); + usb_ep_free_request(io_data->ep, io_data->req); + io_data->req = NULL; + spin_unlock_irqrestore(&io_data->ffs->eps_lock, flags); + if (io_data->read) kfree(io_data->to_free); ffs_free_buffer(io_data); @@ -877,7 +883,6 @@ static void ffs_epfile_async_io_complete(struct usb_ep *_ep, struct ffs_data *ffs = io_data->ffs; io_data->status = req->status ? req->status : req->actual; - usb_ep_free_request(_ep, req); INIT_WORK(&io_data->work, ffs_user_copy_worker); queue_work(ffs->io_completion_wq, &io_data->work); -- cgit v1.2.3 From ec6ce7075ef879b91a8710829016005dc8170f17 Mon Sep 17 00:00:00 2001 From: Peter Korsgaard Date: Thu, 4 Apr 2024 12:06:35 +0200 Subject: usb: gadget: composite: fix OS descriptors w_value logic The OS descriptors logic had the high/low byte of w_value inverted, causing the extended properties to not be accessible for interface != 0. >From the Microsoft documentation: https://learn.microsoft.com/en-us/windows-hardware/drivers/usbcon/microsoft-os-1-0-descriptors-specification OS_Desc_CompatID.doc (w_index = 0x4): - wValue: High Byte = InterfaceNumber. InterfaceNumber is set to the number of the interface or function that is associated with the descriptor, typically 0x00. Because a device can have only one extended compat ID descriptor, it should ignore InterfaceNumber, regardless of the value, and simply return the descriptor. Low Byte = 0. PageNumber is used to retrieve descriptors that are larger than 64 KB. The header section is 16 bytes, so PageNumber is set to 0 for this request. We currently do not support >64KB compat ID descriptors, so verify that the low byte is 0. OS_Desc_Ext_Prop.doc (w_index = 0x5): - wValue: High byte = InterfaceNumber. The high byte of wValue is set to the number of the interface or function that is associated with the descriptor. Low byte = PageNumber. The low byte of wValue is used to retrieve descriptors that are larger than 64 KB. The header section is 10 bytes, so PageNumber is set to 0 for this request. We also don't support >64KB extended properties, so verify that the low byte is 0 and use the high byte for the interface number. Fixes: 37a3a533429e ("usb: gadget: OS Feature Descriptors support") Cc: stable Signed-off-by: Peter Korsgaard Link: https://lore.kernel.org/r/20240404100635.3215340-1-peter@korsgaard.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/composite.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c index 0ace45b66a31..0e151b54aae8 100644 --- a/drivers/usb/gadget/composite.c +++ b/drivers/usb/gadget/composite.c @@ -2112,7 +2112,7 @@ unknown: buf[5] = 0x01; switch (ctrl->bRequestType & USB_RECIP_MASK) { case USB_RECIP_DEVICE: - if (w_index != 0x4 || (w_value >> 8)) + if (w_index != 0x4 || (w_value & 0xff)) break; buf[6] = w_index; /* Number of ext compat interfaces */ @@ -2128,9 +2128,9 @@ unknown: } break; case USB_RECIP_INTERFACE: - if (w_index != 0x5 || (w_value >> 8)) + if (w_index != 0x5 || (w_value & 0xff)) break; - interface = w_value & 0xFF; + interface = w_value >> 8; if (interface >= MAX_CONFIG_INTERFACES || !os_desc_cfg->interface[interface]) break; -- cgit v1.2.3 From 650ae71c80749fc7cb8858c8049f532eaec64410 Mon Sep 17 00:00:00 2001 From: Ivan Avdeev Date: Sat, 13 Apr 2024 11:01:24 -0400 Subject: usb: gadget: uvc: use correct buffer size when parsing configfs lists This commit fixes uvc gadget support on 32-bit platforms. Commit 0df28607c5cb ("usb: gadget: uvc: Generalise helper functions for reuse") introduced a helper function __uvcg_iter_item_entries() to aid with parsing lists of items on configfs attributes stores. This function is a generalization of another very similar function, which used a stack-allocated temporary buffer of fixed size for each item in the list and used the sizeof() operator to check for potential buffer overruns. The new function was changed to allocate the now variably sized temp buffer on heap, but wasn't properly updated to also check for max buffer size using the computed size instead of sizeof() operator. As a result, the maximum item size was 7 (plus null terminator) on 64-bit platforms, and 3 on 32-bit ones. While 7 is accidentally just barely enough, 3 is definitely too small for some of UVC configfs attributes. For example, dwFrameInteval, specified in 100ns units, usually has 6-digit item values, e.g. 166666 for 60fps. Cc: stable@vger.kernel.org Fixes: 0df28607c5cb ("usb: gadget: uvc: Generalise helper functions for reuse") Signed-off-by: Ivan Avdeev Link: https://lore.kernel.org/r/20240413150124.1062026-1-me@provod.works Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/function/uvc_configfs.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/usb/gadget/function/uvc_configfs.c b/drivers/usb/gadget/function/uvc_configfs.c index 7e704b2bcfd1..a4377df612f5 100644 --- a/drivers/usb/gadget/function/uvc_configfs.c +++ b/drivers/usb/gadget/function/uvc_configfs.c @@ -92,10 +92,10 @@ static int __uvcg_iter_item_entries(const char *page, size_t len, while (pg - page < len) { i = 0; - while (i < sizeof(buf) && (pg - page < len) && + while (i < bufsize && (pg - page < len) && *pg != '\0' && *pg != '\n') buf[i++] = *pg++; - if (i == sizeof(buf)) { + if (i == bufsize) { ret = -EINVAL; goto out_free_buf; } -- cgit v1.2.3 From 4a237d55446ff67655dc3eed2d4a41997536fc4c Mon Sep 17 00:00:00 2001 From: Thinh Nguyen Date: Wed, 17 Apr 2024 23:14:30 +0000 Subject: usb: xhci-plat: Don't include xhci.h The xhci_plat.h should not need to include the entire xhci.h header. This can cause redefinition in dwc3 if it selectively includes some xHCI definitions. This is a prerequisite change for a fix to disable suspend during initialization for dwc3. Cc: stable@vger.kernel.org Signed-off-by: Thinh Nguyen Link: https://lore.kernel.org/r/310acfa01c957a10d9feaca3f7206269866ba2eb.1713394973.git.Thinh.Nguyen@synopsys.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-plat.h | 4 +++- drivers/usb/host/xhci-rzv2m.c | 1 + 2 files changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/usb/host/xhci-plat.h b/drivers/usb/host/xhci-plat.h index 2d15386f2c50..6475130eac4b 100644 --- a/drivers/usb/host/xhci-plat.h +++ b/drivers/usb/host/xhci-plat.h @@ -8,7 +8,9 @@ #ifndef _XHCI_PLAT_H #define _XHCI_PLAT_H -#include "xhci.h" /* for hcd_to_xhci() */ +struct device; +struct platform_device; +struct usb_hcd; struct xhci_plat_priv { const char *firmware_name; diff --git a/drivers/usb/host/xhci-rzv2m.c b/drivers/usb/host/xhci-rzv2m.c index ec65b24eafa8..4f59867d7117 100644 --- a/drivers/usb/host/xhci-rzv2m.c +++ b/drivers/usb/host/xhci-rzv2m.c @@ -6,6 +6,7 @@ */ #include +#include "xhci.h" #include "xhci-plat.h" #include "xhci-rzv2m.h" -- cgit v1.2.3 From 6d735722063a945de56472bdc6bfcb170fd43b86 Mon Sep 17 00:00:00 2001 From: Thinh Nguyen Date: Wed, 17 Apr 2024 23:14:36 +0000 Subject: usb: dwc3: core: Prevent phy suspend during init GUSB3PIPECTL.SUSPENDENABLE and GUSB2PHYCFG.SUSPHY should be cleared during initialization. Suspend during initialization can result in undefined behavior due to clock synchronization failure, which often seen as core soft reset timeout. The programming guide recommended these bits to be cleared during initialization for DWC_usb3.0 version 1.94 and above (along with DWC_usb31 and DWC_usb32). The current check in the driver does not account if it's set by default setting from coreConsultant. This is especially the case for DRD when switching mode to ensure the phy clocks are available to change mode. Depending on the platforms/design, some may be affected more than others. This is noted in the DWC_usb3x programming guide under the above registers. Let's just disable them during driver load and mode switching. Restore them when the controller initialization completes. Note that some platforms workaround this issue by disabling phy suspend through "snps,dis_u3_susphy_quirk" and "snps,dis_u2_susphy_quirk" when they should not need to. Cc: stable@vger.kernel.org Fixes: 9ba3aca8fe82 ("usb: dwc3: Disable phy suspend after power-on reset") Signed-off-by: Thinh Nguyen Link: https://lore.kernel.org/r/20da4e5a0c4678c9587d3da23f83bdd6d77353e9.1713394973.git.Thinh.Nguyen@synopsys.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/dwc3/core.c | 90 ++++++++++++++++++++--------------------------- drivers/usb/dwc3/core.h | 1 + drivers/usb/dwc3/gadget.c | 2 ++ drivers/usb/dwc3/host.c | 27 ++++++++++++++ 4 files changed, 68 insertions(+), 52 deletions(-) diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index 31684cdaaae3..100041320e8d 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -104,6 +104,27 @@ static int dwc3_get_dr_mode(struct dwc3 *dwc) return 0; } +void dwc3_enable_susphy(struct dwc3 *dwc, bool enable) +{ + u32 reg; + + reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(0)); + if (enable && !dwc->dis_u3_susphy_quirk) + reg |= DWC3_GUSB3PIPECTL_SUSPHY; + else + reg &= ~DWC3_GUSB3PIPECTL_SUSPHY; + + dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(0), reg); + + reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0)); + if (enable && !dwc->dis_u2_susphy_quirk) + reg |= DWC3_GUSB2PHYCFG_SUSPHY; + else + reg &= ~DWC3_GUSB2PHYCFG_SUSPHY; + + dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg); +} + void dwc3_set_prtcap(struct dwc3 *dwc, u32 mode) { u32 reg; @@ -585,11 +606,8 @@ static int dwc3_core_ulpi_init(struct dwc3 *dwc) */ static int dwc3_phy_setup(struct dwc3 *dwc) { - unsigned int hw_mode; u32 reg; - hw_mode = DWC3_GHWPARAMS0_MODE(dwc->hwparams.hwparams0); - reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(0)); /* @@ -599,21 +617,16 @@ static int dwc3_phy_setup(struct dwc3 *dwc) reg &= ~DWC3_GUSB3PIPECTL_UX_EXIT_PX; /* - * Above 1.94a, it is recommended to set DWC3_GUSB3PIPECTL_SUSPHY - * to '0' during coreConsultant configuration. So default value - * will be '0' when the core is reset. Application needs to set it - * to '1' after the core initialization is completed. - */ - if (!DWC3_VER_IS_WITHIN(DWC3, ANY, 194A)) - reg |= DWC3_GUSB3PIPECTL_SUSPHY; - - /* - * For DRD controllers, GUSB3PIPECTL.SUSPENDENABLE must be cleared after - * power-on reset, and it can be set after core initialization, which is - * after device soft-reset during initialization. + * Above DWC_usb3.0 1.94a, it is recommended to set + * DWC3_GUSB3PIPECTL_SUSPHY to '0' during coreConsultant configuration. + * So default value will be '0' when the core is reset. Application + * needs to set it to '1' after the core initialization is completed. + * + * Similarly for DRD controllers, GUSB3PIPECTL.SUSPENDENABLE must be + * cleared after power-on reset, and it can be set after core + * initialization. */ - if (hw_mode == DWC3_GHWPARAMS0_MODE_DRD) - reg &= ~DWC3_GUSB3PIPECTL_SUSPHY; + reg &= ~DWC3_GUSB3PIPECTL_SUSPHY; if (dwc->u2ss_inp3_quirk) reg |= DWC3_GUSB3PIPECTL_U2SSINP3OK; @@ -639,9 +652,6 @@ static int dwc3_phy_setup(struct dwc3 *dwc) if (dwc->tx_de_emphasis_quirk) reg |= DWC3_GUSB3PIPECTL_TX_DEEPH(dwc->tx_de_emphasis); - if (dwc->dis_u3_susphy_quirk) - reg &= ~DWC3_GUSB3PIPECTL_SUSPHY; - if (dwc->dis_del_phy_power_chg_quirk) reg &= ~DWC3_GUSB3PIPECTL_DEPOCHANGE; @@ -689,24 +699,15 @@ static int dwc3_phy_setup(struct dwc3 *dwc) } /* - * Above 1.94a, it is recommended to set DWC3_GUSB2PHYCFG_SUSPHY to - * '0' during coreConsultant configuration. So default value will - * be '0' when the core is reset. Application needs to set it to - * '1' after the core initialization is completed. - */ - if (!DWC3_VER_IS_WITHIN(DWC3, ANY, 194A)) - reg |= DWC3_GUSB2PHYCFG_SUSPHY; - - /* - * For DRD controllers, GUSB2PHYCFG.SUSPHY must be cleared after - * power-on reset, and it can be set after core initialization, which is - * after device soft-reset during initialization. + * Above DWC_usb3.0 1.94a, it is recommended to set + * DWC3_GUSB2PHYCFG_SUSPHY to '0' during coreConsultant configuration. + * So default value will be '0' when the core is reset. Application + * needs to set it to '1' after the core initialization is completed. + * + * Similarly for DRD controllers, GUSB2PHYCFG.SUSPHY must be cleared + * after power-on reset, and it can be set after core initialization. */ - if (hw_mode == DWC3_GHWPARAMS0_MODE_DRD) - reg &= ~DWC3_GUSB2PHYCFG_SUSPHY; - - if (dwc->dis_u2_susphy_quirk) - reg &= ~DWC3_GUSB2PHYCFG_SUSPHY; + reg &= ~DWC3_GUSB2PHYCFG_SUSPHY; if (dwc->dis_enblslpm_quirk) reg &= ~DWC3_GUSB2PHYCFG_ENBLSLPM; @@ -1227,21 +1228,6 @@ static int dwc3_core_init(struct dwc3 *dwc) if (ret) goto err_exit_phy; - if (hw_mode == DWC3_GHWPARAMS0_MODE_DRD && - !DWC3_VER_IS_WITHIN(DWC3, ANY, 194A)) { - if (!dwc->dis_u3_susphy_quirk) { - reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(0)); - reg |= DWC3_GUSB3PIPECTL_SUSPHY; - dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(0), reg); - } - - if (!dwc->dis_u2_susphy_quirk) { - reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0)); - reg |= DWC3_GUSB2PHYCFG_SUSPHY; - dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg); - } - } - dwc3_core_setup_global_control(dwc); dwc3_core_num_eps(dwc); diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h index 7e80dd3d466b..180dd8d29287 100644 --- a/drivers/usb/dwc3/core.h +++ b/drivers/usb/dwc3/core.h @@ -1580,6 +1580,7 @@ int dwc3_event_buffers_setup(struct dwc3 *dwc); void dwc3_event_buffers_cleanup(struct dwc3 *dwc); int dwc3_core_soft_reset(struct dwc3 *dwc); +void dwc3_enable_susphy(struct dwc3 *dwc, bool enable); #if IS_ENABLED(CONFIG_USB_DWC3_HOST) || IS_ENABLED(CONFIG_USB_DWC3_DUAL_ROLE) int dwc3_host_init(struct dwc3 *dwc); diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index 4df2661f6675..f94f68f1e7d2 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -2924,6 +2924,7 @@ static int __dwc3_gadget_start(struct dwc3 *dwc) dwc3_ep0_out_start(dwc); dwc3_gadget_enable_irq(dwc); + dwc3_enable_susphy(dwc, true); return 0; @@ -4690,6 +4691,7 @@ void dwc3_gadget_exit(struct dwc3 *dwc) if (!dwc->gadget) return; + dwc3_enable_susphy(dwc, false); usb_del_gadget(dwc->gadget); dwc3_gadget_free_endpoints(dwc); usb_put_gadget(dwc->gadget); diff --git a/drivers/usb/dwc3/host.c b/drivers/usb/dwc3/host.c index 0204787df81d..a171b27a7845 100644 --- a/drivers/usb/dwc3/host.c +++ b/drivers/usb/dwc3/host.c @@ -10,10 +10,13 @@ #include #include #include +#include +#include #include "../host/xhci-port.h" #include "../host/xhci-ext-caps.h" #include "../host/xhci-caps.h" +#include "../host/xhci-plat.h" #include "core.h" #define XHCI_HCSPARAMS1 0x4 @@ -57,6 +60,24 @@ static void dwc3_power_off_all_roothub_ports(struct dwc3 *dwc) } } +static void dwc3_xhci_plat_start(struct usb_hcd *hcd) +{ + struct platform_device *pdev; + struct dwc3 *dwc; + + if (!usb_hcd_is_primary_hcd(hcd)) + return; + + pdev = to_platform_device(hcd->self.controller); + dwc = dev_get_drvdata(pdev->dev.parent); + + dwc3_enable_susphy(dwc, true); +} + +static const struct xhci_plat_priv dwc3_xhci_plat_quirk = { + .plat_start = dwc3_xhci_plat_start, +}; + static void dwc3_host_fill_xhci_irq_res(struct dwc3 *dwc, int irq, char *name) { @@ -167,6 +188,11 @@ int dwc3_host_init(struct dwc3 *dwc) } } + ret = platform_device_add_data(xhci, &dwc3_xhci_plat_quirk, + sizeof(struct xhci_plat_priv)); + if (ret) + goto err; + ret = platform_device_add(xhci); if (ret) { dev_err(dwc->dev, "failed to register xHCI device\n"); @@ -192,6 +218,7 @@ void dwc3_host_exit(struct dwc3 *dwc) if (dwc->sys_wakeup) device_init_wakeup(&dwc->xhci->dev, false); + dwc3_enable_susphy(dwc, false); platform_device_unregister(dwc->xhci); dwc->xhci = NULL; } -- cgit v1.2.3 From a4b46d450c49f32e9d4247b421e58083fde304ce Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Thu, 18 Apr 2024 11:13:13 -0400 Subject: USB: core: Fix access violation during port device removal Testing with KASAN and syzkaller revealed a bug in port.c:disable_store(): usb_hub_to_struct_hub() can return NULL if the hub that the port belongs to is concurrently removed, but the function does not check for this possibility before dereferencing the returned value. It turns out that the first dereference is unnecessary, since hub->intfdev is the parent of the port device, so it can be changed easily. Adding a check for hub == NULL prevents further problems. The same bug exists in the disable_show() routine, and it can be fixed the same way. Signed-off-by: Alan Stern Reported-and-tested-by: Yue Sun Reported-by: xingwei lee Link: https://lore.kernel.org/linux-usb/CAEkJfYON+ry7xPx=AiLR9jzUNT+i_Va68ACajOC3HoacOfL1ig@mail.gmail.com/ Fixes: f061f43d7418 ("usb: hub: port: add sysfs entry to switch port power") CC: Michael Grzeschik CC: stable@vger.kernel.org Link: https://lore.kernel.org/r/393aa580-15a5-44ca-ad3b-6462461cd313@rowland.harvard.edu Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/port.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/drivers/usb/core/port.c b/drivers/usb/core/port.c index 0e1262a077ae..e7da2fca11a4 100644 --- a/drivers/usb/core/port.c +++ b/drivers/usb/core/port.c @@ -51,13 +51,15 @@ static ssize_t disable_show(struct device *dev, struct usb_port *port_dev = to_usb_port(dev); struct usb_device *hdev = to_usb_device(dev->parent->parent); struct usb_hub *hub = usb_hub_to_struct_hub(hdev); - struct usb_interface *intf = to_usb_interface(hub->intfdev); + struct usb_interface *intf = to_usb_interface(dev->parent); int port1 = port_dev->portnum; u16 portstatus, unused; bool disabled; int rc; struct kernfs_node *kn; + if (!hub) + return -ENODEV; hub_get(hub); rc = usb_autopm_get_interface(intf); if (rc < 0) @@ -101,12 +103,14 @@ static ssize_t disable_store(struct device *dev, struct device_attribute *attr, struct usb_port *port_dev = to_usb_port(dev); struct usb_device *hdev = to_usb_device(dev->parent->parent); struct usb_hub *hub = usb_hub_to_struct_hub(hdev); - struct usb_interface *intf = to_usb_interface(hub->intfdev); + struct usb_interface *intf = to_usb_interface(dev->parent); int port1 = port_dev->portnum; bool disabled; int rc; struct kernfs_node *kn; + if (!hub) + return -ENODEV; rc = kstrtobool(buf, &disabled); if (rc) return rc; -- cgit v1.2.3 From 0aea736ddb877b93f6d2dd8cf439840d6b4970a9 Mon Sep 17 00:00:00 2001 From: Chris Wulff Date: Tue, 23 Apr 2024 18:02:15 +0000 Subject: usb: gadget: f_fs: Fix a race condition when processing setup packets. If the USB driver passes a pointer into the TRB buffer for creq, this buffer can be overwritten with the status response as soon as the event is queued. This can make the final check return USB_GADGET_DELAYED_STATUS when it shouldn't. Instead use the stored wLength. Fixes: 4d644abf2569 ("usb: gadget: f_fs: Only return delayed status when len is 0") Cc: stable Signed-off-by: Chris Wulff Link: https://lore.kernel.org/r/CO1PR17MB5419BD664264A558B2395E28E1112@CO1PR17MB5419.namprd17.prod.outlook.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/function/f_fs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/gadget/function/f_fs.c b/drivers/usb/gadget/function/f_fs.c index aa80c2a6b8e0..a057cbedf3c9 100644 --- a/drivers/usb/gadget/function/f_fs.c +++ b/drivers/usb/gadget/function/f_fs.c @@ -3811,7 +3811,7 @@ static int ffs_func_setup(struct usb_function *f, __ffs_event_add(ffs, FUNCTIONFS_SETUP); spin_unlock_irqrestore(&ffs->ev.waitq.lock, flags); - return creq->wLength == 0 ? USB_GADGET_DELAYED_STATUS : 0; + return ffs->ev.setup.wLength == 0 ? USB_GADGET_DELAYED_STATUS : 0; } static bool ffs_func_req_match(struct usb_function *f, -- cgit v1.2.3 From d80eee97cb4e90768a81c856ac71d721996d86b7 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Thu, 18 Apr 2024 16:57:29 +0200 Subject: usb: typec: qcom-pmic: fix use-after-free on late probe errors Make sure to stop and deregister the port in case of late probe errors to avoid use-after-free issues when the underlying memory is released by devres. Fixes: a4422ff22142 ("usb: typec: qcom: Add Qualcomm PMIC Type-C driver") Cc: stable@vger.kernel.org # 6.5 Cc: Bryan O'Donoghue Signed-off-by: Johan Hovold Reviewed-by: Dmitry Baryshkov Reviewed-by: Bryan O'Donoghue Reviewed-by: Heikki Krogerus Link: https://lore.kernel.org/r/20240418145730.4605-2-johan+linaro@kernel.org Signed-off-by: Greg Kroah-Hartman --- drivers/usb/typec/tcpm/qcom/qcom_pmic_typec.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/drivers/usb/typec/tcpm/qcom/qcom_pmic_typec.c b/drivers/usb/typec/tcpm/qcom/qcom_pmic_typec.c index e48412cdcb0f..d3958c061a97 100644 --- a/drivers/usb/typec/tcpm/qcom/qcom_pmic_typec.c +++ b/drivers/usb/typec/tcpm/qcom/qcom_pmic_typec.c @@ -104,14 +104,18 @@ static int qcom_pmic_typec_probe(struct platform_device *pdev) ret = tcpm->port_start(tcpm, tcpm->tcpm_port); if (ret) - goto fwnode_remove; + goto port_unregister; ret = tcpm->pdphy_start(tcpm, tcpm->tcpm_port); if (ret) - goto fwnode_remove; + goto port_stop; return 0; +port_stop: + tcpm->port_stop(tcpm); +port_unregister: + tcpm_unregister_port(tcpm->tcpm_port); fwnode_remove: fwnode_remove_software_node(tcpm->tcpc.fwnode); -- cgit v1.2.3 From f2004e82abb679735e1dff99f9c94eb4bfe735b4 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Thu, 18 Apr 2024 16:57:30 +0200 Subject: usb: typec: qcom-pmic: fix pdphy start() error handling Move disabling of the vdd-pdphy supply to the start() function which enabled it for symmetry and to make sure that it is disabled as intended in all error paths of pmic_typec_pdphy_reset() (i.e. not just when qcom_pmic_typec_pdphy_enable() fails). Cc: stable+noautosel@kernel.org # Not needed in any stable release, just a minor bugfix Fixes: a4422ff22142 ("usb: typec: qcom: Add Qualcomm PMIC Type-C driver") Signed-off-by: Johan Hovold Reviewed-by: Bryan O'Donoghue Reviewed-by: Heikki Krogerus Reviewed-by: Dmitry Baryshkov Link: https://lore.kernel.org/r/20240418145730.4605-3-johan+linaro@kernel.org Signed-off-by: Greg Kroah-Hartman --- drivers/usb/typec/tcpm/qcom/qcom_pmic_typec_pdphy.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) diff --git a/drivers/usb/typec/tcpm/qcom/qcom_pmic_typec_pdphy.c b/drivers/usb/typec/tcpm/qcom/qcom_pmic_typec_pdphy.c index 6560f4fc98d5..5b7f52b74a40 100644 --- a/drivers/usb/typec/tcpm/qcom/qcom_pmic_typec_pdphy.c +++ b/drivers/usb/typec/tcpm/qcom/qcom_pmic_typec_pdphy.c @@ -475,10 +475,8 @@ static int qcom_pmic_typec_pdphy_enable(struct pmic_typec_pdphy *pmic_typec_pdph qcom_pmic_typec_pdphy_reset_off(pmic_typec_pdphy); done: - if (ret) { - regulator_disable(pmic_typec_pdphy->vdd_pdphy); + if (ret) dev_err(dev, "pdphy_enable fail %d\n", ret); - } return ret; } @@ -524,12 +522,17 @@ static int qcom_pmic_typec_pdphy_start(struct pmic_typec *tcpm, ret = pmic_typec_pdphy_reset(pmic_typec_pdphy); if (ret) - return ret; + goto err_disable_vdd_pdhy; for (i = 0; i < pmic_typec_pdphy->nr_irqs; i++) enable_irq(pmic_typec_pdphy->irq_data[i].irq); return 0; + +err_disable_vdd_pdhy: + regulator_disable(pmic_typec_pdphy->vdd_pdphy); + + return ret; } static void qcom_pmic_typec_pdphy_stop(struct pmic_typec *tcpm) -- cgit v1.2.3 From a1383ac7284afc2f0ca39edee57dea4db70e66f3 Mon Sep 17 00:00:00 2001 From: Daniele Ceraolo Spurio Date: Sun, 21 Apr 2024 12:07:01 +0300 Subject: mei: pxp: match against PCI_CLASS_DISPLAY_OTHER The ATS-M class is PCI_CLASS_DISPLAY_OTHER instead of PCI_CLASS_DISPLAY_VGA, so we need to match against that class as well. The matching is still restricted to Intel devices only. Fixes: ceeedd951f8a ("mei: pxp: match without driver name") Signed-off-by: Daniele Ceraolo Spurio Signed-off-by: Tomas Winkler Link: https://lore.kernel.org/r/20240421090701.216028-1-tomas.winkler@intel.com Signed-off-by: Greg Kroah-Hartman --- drivers/misc/mei/pxp/mei_pxp.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/misc/mei/pxp/mei_pxp.c b/drivers/misc/mei/pxp/mei_pxp.c index b1e4c23b31a3..49abc95677cd 100644 --- a/drivers/misc/mei/pxp/mei_pxp.c +++ b/drivers/misc/mei/pxp/mei_pxp.c @@ -236,8 +236,11 @@ static int mei_pxp_component_match(struct device *dev, int subcomponent, pdev = to_pci_dev(dev); - if (pdev->class != (PCI_CLASS_DISPLAY_VGA << 8) || - pdev->vendor != PCI_VENDOR_ID_INTEL) + if (pdev->vendor != PCI_VENDOR_ID_INTEL) + return 0; + + if (pdev->class != (PCI_CLASS_DISPLAY_VGA << 8) && + pdev->class != (PCI_CLASS_DISPLAY_OTHER << 8)) return 0; if (subcomponent != I915_COMPONENT_PXP) -- cgit v1.2.3 From 4108a30f1097eead0f6bd5d885e6bf093b4d460f Mon Sep 17 00:00:00 2001 From: Alexander Usyskin Date: Sun, 21 Apr 2024 16:56:31 +0300 Subject: mei: me: add lunar lake point M DID Add Lunar (Point) Lake M device id. Cc: stable@vger.kernel.org Signed-off-by: Alexander Usyskin Signed-off-by: Tomas Winkler Link: https://lore.kernel.org/r/20240421135631.223362-1-tomas.winkler@intel.com Signed-off-by: Greg Kroah-Hartman --- drivers/misc/mei/hw-me-regs.h | 2 ++ drivers/misc/mei/pci-me.c | 2 ++ 2 files changed, 4 insertions(+) diff --git a/drivers/misc/mei/hw-me-regs.h b/drivers/misc/mei/hw-me-regs.h index aac36750d2c5..c3a6657dcd4a 100644 --- a/drivers/misc/mei/hw-me-regs.h +++ b/drivers/misc/mei/hw-me-regs.h @@ -115,6 +115,8 @@ #define MEI_DEV_ID_ARL_S 0x7F68 /* Arrow Lake Point S */ #define MEI_DEV_ID_ARL_H 0x7770 /* Arrow Lake Point H */ +#define MEI_DEV_ID_LNL_M 0xA870 /* Lunar Lake Point M */ + /* * MEI HW Section */ diff --git a/drivers/misc/mei/pci-me.c b/drivers/misc/mei/pci-me.c index c39718042e2e..7f59dd38c32f 100644 --- a/drivers/misc/mei/pci-me.c +++ b/drivers/misc/mei/pci-me.c @@ -122,6 +122,8 @@ static const struct pci_device_id mei_me_pci_tbl[] = { {MEI_PCI_DEVICE(MEI_DEV_ID_ARL_S, MEI_ME_PCH15_CFG)}, {MEI_PCI_DEVICE(MEI_DEV_ID_ARL_H, MEI_ME_PCH15_CFG)}, + {MEI_PCI_DEVICE(MEI_DEV_ID_LNL_M, MEI_ME_PCH15_CFG)}, + /* required last entry */ {0, } }; -- cgit v1.2.3 From 1c5a1627f48105cbab81d25ec2f72232bfaa8185 Mon Sep 17 00:00:00 2001 From: Chen Yu Date: Wed, 10 Apr 2024 18:23:01 +0800 Subject: efi/unaccepted: touch soft lockup during memory accept Commit 50e782a86c98 ("efi/unaccepted: Fix soft lockups caused by parallel memory acceptance") has released the spinlock so other CPUs can do memory acceptance in parallel and not triggers softlockup on other CPUs. However the softlock up was intermittent shown up if the memory of the TD guest is large, and the timeout of softlockup is set to 1 second: RIP: 0010:_raw_spin_unlock_irqrestore Call Trace: ? __hrtimer_run_queues ? hrtimer_interrupt ? watchdog_timer_fn ? __sysvec_apic_timer_interrupt ? __pfx_watchdog_timer_fn ? sysvec_apic_timer_interrupt ? __hrtimer_run_queues ? hrtimer_interrupt ? asm_sysvec_apic_timer_interrupt ? _raw_spin_unlock_irqrestore ? __sysvec_apic_timer_interrupt ? sysvec_apic_timer_interrupt accept_memory try_to_accept_memory do_huge_pmd_anonymous_page get_page_from_freelist __handle_mm_fault __alloc_pages __folio_alloc ? __tdx_hypercall handle_mm_fault vma_alloc_folio do_user_addr_fault do_huge_pmd_anonymous_page exc_page_fault ? __do_huge_pmd_anonymous_page asm_exc_page_fault __handle_mm_fault When the local irq is enabled at the end of accept_memory(), the softlockup detects that the watchdog on single CPU has not been fed for a while. That is to say, even other CPUs will not be blocked by spinlock, the current CPU might be stunk with local irq disabled for a while, which hurts not only nmi watchdog but also softlockup. Chao Gao pointed out that the memory accept could be time costly and there was similar report before. Thus to avoid any softlocup detection during this stage, give the softlockup a flag to skip the timeout check at the end of accept_memory(), by invoking touch_softlockup_watchdog(). Reported-by: Hossain, Md Iqbal Signed-off-by: Chen Yu Reviewed-by: Kirill A. Shutemov Fixes: 50e782a86c98 ("efi/unaccepted: Fix soft lockups caused by parallel memory acceptance") Signed-off-by: Ard Biesheuvel --- drivers/firmware/efi/unaccepted_memory.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/firmware/efi/unaccepted_memory.c b/drivers/firmware/efi/unaccepted_memory.c index 5b439d04079c..50f6503fe49f 100644 --- a/drivers/firmware/efi/unaccepted_memory.c +++ b/drivers/firmware/efi/unaccepted_memory.c @@ -4,6 +4,7 @@ #include #include #include +#include #include /* Protects unaccepted memory bitmap and accepting_list */ @@ -149,6 +150,9 @@ retry: } list_del(&range.list); + + touch_softlockup_watchdog(); + spin_unlock_irqrestore(&unaccepted_memory_lock, flags); } -- cgit v1.2.3 From 6e3b7e862ea4e4ff1be1d153ae07dfe150ed8896 Mon Sep 17 00:00:00 2001 From: Conor Dooley Date: Wed, 10 Apr 2024 12:58:05 +0100 Subject: firmware: microchip: don't unconditionally print validation success If validation fails, both prints are made. Skip the success one in the failure case. Fixes: ec5b0f1193ad ("firmware: microchip: add PolarFire SoC Auto Update support") Signed-off-by: Conor Dooley --- drivers/firmware/microchip/mpfs-auto-update.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/firmware/microchip/mpfs-auto-update.c b/drivers/firmware/microchip/mpfs-auto-update.c index fbeeaee4ac85..23134ffc4dfc 100644 --- a/drivers/firmware/microchip/mpfs-auto-update.c +++ b/drivers/firmware/microchip/mpfs-auto-update.c @@ -206,10 +206,12 @@ static int mpfs_auto_update_verify_image(struct fw_upload *fw_uploader) if (ret | response->resp_status) { dev_warn(priv->dev, "Verification of Upgrade Image failed!\n"); ret = ret ? ret : -EBADMSG; + goto free_message; } dev_info(priv->dev, "Verification of Upgrade Image passed!\n"); +free_message: devm_kfree(priv->dev, message); free_response: devm_kfree(priv->dev, response); -- cgit v1.2.3 From 3aa20d1f7bcb19a79b8062e49153eb3b16a88adb Mon Sep 17 00:00:00 2001 From: Conor Dooley Date: Wed, 10 Apr 2024 12:58:06 +0100 Subject: firmware: microchip: clarify that sizes and addresses are in hex As it says on the tin. It can be kinda confusing when "22830" is in hex, so prefix the hex numbers with a "0x". Signed-off-by: Conor Dooley --- drivers/firmware/microchip/mpfs-auto-update.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/firmware/microchip/mpfs-auto-update.c b/drivers/firmware/microchip/mpfs-auto-update.c index 23134ffc4dfc..835a19a7a3a0 100644 --- a/drivers/firmware/microchip/mpfs-auto-update.c +++ b/drivers/firmware/microchip/mpfs-auto-update.c @@ -267,7 +267,7 @@ static int mpfs_auto_update_set_image_address(struct mpfs_auto_update_priv *priv AUTO_UPDATE_DIRECTORY_WIDTH); memset(buffer + AUTO_UPDATE_BLANK_DIRECTORY, 0x0, AUTO_UPDATE_DIRECTORY_WIDTH); - dev_info(priv->dev, "Writing the image address (%x) to the flash directory (%llx)\n", + dev_info(priv->dev, "Writing the image address (0x%x) to the flash directory (0x%llx)\n", image_address, directory_address); ret = mtd_write(priv->flash, 0x0, erase_size, &bytes_written, (u_char *)buffer); @@ -315,7 +315,7 @@ static int mpfs_auto_update_write_bitstream(struct fw_upload *fw_uploader, const erase.len = round_up(size, (size_t)priv->flash->erasesize); erase.addr = image_address; - dev_info(priv->dev, "Erasing the flash at address (%x)\n", image_address); + dev_info(priv->dev, "Erasing the flash at address (0x%x)\n", image_address); ret = mtd_erase(priv->flash, &erase); if (ret) goto out; @@ -325,7 +325,7 @@ static int mpfs_auto_update_write_bitstream(struct fw_upload *fw_uploader, const * will do all of that itself - including verifying that the bitstream * is valid. */ - dev_info(priv->dev, "Writing the image to the flash at address (%x)\n", image_address); + dev_info(priv->dev, "Writing the image to the flash at address (0x%x)\n", image_address); ret = mtd_write(priv->flash, (loff_t)image_address, size, &bytes_written, data); if (ret) goto out; -- cgit v1.2.3 From be81415a32ef6d8a8a85529fcfac03d05b3e757d Mon Sep 17 00:00:00 2001 From: Vicki Pfau Date: Wed, 3 Apr 2024 20:53:45 -0700 Subject: Input: xpad - add support for ASUS ROG RAIKIRI Add the VID/PID for ASUS ROG RAIKIRI to xpad_device and the VID to xpad_table Signed-off-by: Vicki Pfau Link: https://lore.kernel.org/r/20240404035345.159643-1-vi@endrift.com Signed-off-by: Dmitry Torokhov --- drivers/input/joystick/xpad.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/input/joystick/xpad.c b/drivers/input/joystick/xpad.c index f50848ed5575..6fadaddb2b90 100644 --- a/drivers/input/joystick/xpad.c +++ b/drivers/input/joystick/xpad.c @@ -208,6 +208,7 @@ static const struct xpad_device { { 0x0738, 0xcb29, "Saitek Aviator Stick AV8R02", 0, XTYPE_XBOX360 }, { 0x0738, 0xf738, "Super SFIV FightStick TE S", 0, XTYPE_XBOX360 }, { 0x07ff, 0xffff, "Mad Catz GamePad", 0, XTYPE_XBOX360 }, + { 0x0b05, 0x1a38, "ASUS ROG RAIKIRI", 0, XTYPE_XBOXONE }, { 0x0c12, 0x0005, "Intec wireless", 0, XTYPE_XBOX }, { 0x0c12, 0x8801, "Nyko Xbox Controller", 0, XTYPE_XBOX }, { 0x0c12, 0x8802, "Zeroplus Xbox Controller", 0, XTYPE_XBOX }, @@ -487,6 +488,7 @@ static const struct usb_device_id xpad_table[] = { { USB_DEVICE(0x0738, 0x4540) }, /* Mad Catz Beat Pad */ XPAD_XBOXONE_VENDOR(0x0738), /* Mad Catz FightStick TE 2 */ XPAD_XBOX360_VENDOR(0x07ff), /* Mad Catz Gamepad */ + XPAD_XBOXONE_VENDOR(0x0b05), /* ASUS controllers */ XPAD_XBOX360_VENDOR(0x0c12), /* Zeroplus X-Box 360 controllers */ XPAD_XBOX360_VENDOR(0x0e6f), /* 0x0e6f Xbox 360 controllers */ XPAD_XBOXONE_VENDOR(0x0e6f), /* 0x0e6f Xbox One controllers */ -- cgit v1.2.3 From f19257997d9c31864b4cf3fcef6e2d2b9ede148d Mon Sep 17 00:00:00 2001 From: Yuezhang Mo Date: Fri, 12 Jan 2024 14:48:46 +0800 Subject: exfat: zero the reserved fields of file and stream extension dentries From exFAT specification, the reserved fields should initialize to zero and should not use for any purpose. If create a new dentry set in the UNUSED dentries, all fields had been zeroed when allocating cluster to parent directory. But if create a new dentry set in the DELETED dentries, the reserved fields in file and stream extension dentries may be non-zero. Because only the valid bit of the type field of the dentry is cleared in exfat_remove_entries(), if the type of dentry is different from the original(For example, a dentry that was originally a file name dentry, then set to deleted dentry, and then set as a file dentry), the reserved fields is non-zero. So this commit initializes the dentry to 0 before createing file dentry and stream extension dentry. Signed-off-by: Yuezhang Mo Reviewed-by: Andy Wu Reviewed-by: Aoyama Wataru Reviewed-by: Sungjong Seo Signed-off-by: Namjae Jeon --- fs/exfat/dir.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/fs/exfat/dir.c b/fs/exfat/dir.c index 077944d3c2c0..84572e11cc05 100644 --- a/fs/exfat/dir.c +++ b/fs/exfat/dir.c @@ -420,6 +420,7 @@ static void exfat_set_entry_type(struct exfat_dentry *ep, unsigned int type) static void exfat_init_stream_entry(struct exfat_dentry *ep, unsigned int start_clu, unsigned long long size) { + memset(ep, 0, sizeof(*ep)); exfat_set_entry_type(ep, TYPE_STREAM); if (size == 0) ep->dentry.stream.flags = ALLOC_FAT_CHAIN; @@ -457,6 +458,7 @@ void exfat_init_dir_entry(struct exfat_entry_set_cache *es, struct exfat_dentry *ep; ep = exfat_get_dentry_cached(es, ES_IDX_FILE); + memset(ep, 0, sizeof(*ep)); exfat_set_entry_type(ep, type); exfat_set_entry_time(sbi, ts, &ep->dentry.file.create_tz, -- cgit v1.2.3 From 9af503d91298c3f2945e73703f0e00995be08c30 Mon Sep 17 00:00:00 2001 From: Dominique Martinet Date: Fri, 19 Apr 2024 11:22:48 +0900 Subject: btrfs: add missing mutex_unlock in btrfs_relocate_sys_chunks() The previous patch that replaced BUG_ON by error handling forgot to unlock the mutex in the error path. Link: https://lore.kernel.org/all/Zh%2fHpAGFqa7YAFuM@duo.ucw.cz Reported-by: Pavel Machek Fixes: 7411055db5ce ("btrfs: handle chunk tree lookup error in btrfs_relocate_sys_chunks()") CC: stable@vger.kernel.org Reviewed-by: Pavel Machek Signed-off-by: Dominique Martinet Reviewed-by: David Sterba Signed-off-by: David Sterba --- fs/btrfs/volumes.c | 1 + 1 file changed, 1 insertion(+) diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c index dedec3d9b111..c72c351fe7eb 100644 --- a/fs/btrfs/volumes.c +++ b/fs/btrfs/volumes.c @@ -3419,6 +3419,7 @@ again: * alignment and size). */ ret = -EUCLEAN; + mutex_unlock(&fs_info->reclaim_bgs_lock); goto error; } -- cgit v1.2.3 From 0f2b8098d72a93890e69aa24ec549ef4bc34f4db Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Fri, 19 Apr 2024 14:38:48 -0400 Subject: btrfs: take the cleaner_mutex earlier in qgroup disable One of my CI runs popped the following lockdep splat ====================================================== WARNING: possible circular locking dependency detected 6.9.0-rc4+ #1 Not tainted ------------------------------------------------------ btrfs/471533 is trying to acquire lock: ffff92ba46980850 (&fs_info->cleaner_mutex){+.+.}-{3:3}, at: btrfs_quota_disable+0x54/0x4c0 but task is already holding lock: ffff92ba46980bd0 (&fs_info->subvol_sem){++++}-{3:3}, at: btrfs_ioctl+0x1c8f/0x2600 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (&fs_info->subvol_sem){++++}-{3:3}: down_read+0x42/0x170 btrfs_rename+0x607/0xb00 btrfs_rename2+0x2e/0x70 vfs_rename+0xaf8/0xfc0 do_renameat2+0x586/0x600 __x64_sys_rename+0x43/0x50 do_syscall_64+0x95/0x180 entry_SYSCALL_64_after_hwframe+0x76/0x7e -> #1 (&sb->s_type->i_mutex_key#16){++++}-{3:3}: down_write+0x3f/0xc0 btrfs_inode_lock+0x40/0x70 prealloc_file_extent_cluster+0x1b0/0x370 relocate_file_extent_cluster+0xb2/0x720 relocate_data_extent+0x107/0x160 relocate_block_group+0x442/0x550 btrfs_relocate_block_group+0x2cb/0x4b0 btrfs_relocate_chunk+0x50/0x1b0 btrfs_balance+0x92f/0x13d0 btrfs_ioctl+0x1abf/0x2600 __x64_sys_ioctl+0x97/0xd0 do_syscall_64+0x95/0x180 entry_SYSCALL_64_after_hwframe+0x76/0x7e -> #0 (&fs_info->cleaner_mutex){+.+.}-{3:3}: __lock_acquire+0x13e7/0x2180 lock_acquire+0xcb/0x2e0 __mutex_lock+0xbe/0xc00 btrfs_quota_disable+0x54/0x4c0 btrfs_ioctl+0x206b/0x2600 __x64_sys_ioctl+0x97/0xd0 do_syscall_64+0x95/0x180 entry_SYSCALL_64_after_hwframe+0x76/0x7e other info that might help us debug this: Chain exists of: &fs_info->cleaner_mutex --> &sb->s_type->i_mutex_key#16 --> &fs_info->subvol_sem Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&fs_info->subvol_sem); lock(&sb->s_type->i_mutex_key#16); lock(&fs_info->subvol_sem); lock(&fs_info->cleaner_mutex); *** DEADLOCK *** 2 locks held by btrfs/471533: #0: ffff92ba4319e420 (sb_writers#14){.+.+}-{0:0}, at: btrfs_ioctl+0x3b5/0x2600 #1: ffff92ba46980bd0 (&fs_info->subvol_sem){++++}-{3:3}, at: btrfs_ioctl+0x1c8f/0x2600 stack backtrace: CPU: 1 PID: 471533 Comm: btrfs Kdump: loaded Not tainted 6.9.0-rc4+ #1 Call Trace: dump_stack_lvl+0x77/0xb0 check_noncircular+0x148/0x160 ? lock_acquire+0xcb/0x2e0 __lock_acquire+0x13e7/0x2180 lock_acquire+0xcb/0x2e0 ? btrfs_quota_disable+0x54/0x4c0 ? lock_is_held_type+0x9a/0x110 __mutex_lock+0xbe/0xc00 ? btrfs_quota_disable+0x54/0x4c0 ? srso_return_thunk+0x5/0x5f ? lock_acquire+0xcb/0x2e0 ? btrfs_quota_disable+0x54/0x4c0 ? btrfs_quota_disable+0x54/0x4c0 btrfs_quota_disable+0x54/0x4c0 btrfs_ioctl+0x206b/0x2600 ? srso_return_thunk+0x5/0x5f ? __do_sys_statfs+0x61/0x70 __x64_sys_ioctl+0x97/0xd0 do_syscall_64+0x95/0x180 ? srso_return_thunk+0x5/0x5f ? reacquire_held_locks+0xd1/0x1f0 ? do_user_addr_fault+0x307/0x8a0 ? srso_return_thunk+0x5/0x5f ? lock_acquire+0xcb/0x2e0 ? srso_return_thunk+0x5/0x5f ? srso_return_thunk+0x5/0x5f ? find_held_lock+0x2b/0x80 ? srso_return_thunk+0x5/0x5f ? lock_release+0xca/0x2a0 ? srso_return_thunk+0x5/0x5f ? do_user_addr_fault+0x35c/0x8a0 ? srso_return_thunk+0x5/0x5f ? trace_hardirqs_off+0x4b/0xc0 ? srso_return_thunk+0x5/0x5f ? lockdep_hardirqs_on_prepare+0xde/0x190 ? srso_return_thunk+0x5/0x5f This happens because when we call rename we already have the inode mutex held, and then we acquire the subvol_sem if we are a subvolume. This makes the dependency inode lock -> subvol sem When we're running data relocation we will preallocate space for the data relocation inode, and we always run the relocation under the ->cleaner_mutex. This now creates the dependency of cleaner_mutex -> inode lock (from the prealloc) -> subvol_sem Qgroup delete is doing this in the opposite order, it is acquiring the subvol_sem and then it is acquiring the cleaner_mutex, which results in this lockdep splat. This deadlock can't happen in reality, because we won't ever rename the data reloc inode, nor is the data reloc inode a subvolume. However this is fairly easy to fix, simply take the cleaner mutex in the case where we are disabling qgroups before we take the subvol_sem. This resolves the lockdep splat. Reviewed-by: Filipe Manana Signed-off-by: Josef Bacik Reviewed-by: David Sterba Signed-off-by: David Sterba --- fs/btrfs/ioctl.c | 33 ++++++++++++++++++++++++++++++--- fs/btrfs/qgroup.c | 21 ++++++++------------- 2 files changed, 38 insertions(+), 16 deletions(-) diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c index 5a507237c4fa..12ede85018bf 100644 --- a/fs/btrfs/ioctl.c +++ b/fs/btrfs/ioctl.c @@ -3758,15 +3758,43 @@ static long btrfs_ioctl_quota_ctl(struct file *file, void __user *arg) goto drop_write; } - down_write(&fs_info->subvol_sem); - switch (sa->cmd) { case BTRFS_QUOTA_CTL_ENABLE: case BTRFS_QUOTA_CTL_ENABLE_SIMPLE_QUOTA: + down_write(&fs_info->subvol_sem); ret = btrfs_quota_enable(fs_info, sa); + up_write(&fs_info->subvol_sem); break; case BTRFS_QUOTA_CTL_DISABLE: + /* + * Lock the cleaner mutex to prevent races with concurrent + * relocation, because relocation may be building backrefs for + * blocks of the quota root while we are deleting the root. This + * is like dropping fs roots of deleted snapshots/subvolumes, we + * need the same protection. + * + * This also prevents races between concurrent tasks trying to + * disable quotas, because we will unlock and relock + * qgroup_ioctl_lock across BTRFS_FS_QUOTA_ENABLED changes. + * + * We take this here because we have the dependency of + * + * inode_lock -> subvol_sem + * + * because of rename. With relocation we can prealloc extents, + * so that makes the dependency chain + * + * cleaner_mutex -> inode_lock -> subvol_sem + * + * so we must take the cleaner_mutex here before we take the + * subvol_sem. The deadlock can't actually happen, but this + * quiets lockdep. + */ + mutex_lock(&fs_info->cleaner_mutex); + down_write(&fs_info->subvol_sem); ret = btrfs_quota_disable(fs_info); + up_write(&fs_info->subvol_sem); + mutex_unlock(&fs_info->cleaner_mutex); break; default: ret = -EINVAL; @@ -3774,7 +3802,6 @@ static long btrfs_ioctl_quota_ctl(struct file *file, void __user *arg) } kfree(sa); - up_write(&fs_info->subvol_sem); drop_write: mnt_drop_write_file(file); return ret; diff --git a/fs/btrfs/qgroup.c b/fs/btrfs/qgroup.c index cf8820ce7aa2..364acc9bbe73 100644 --- a/fs/btrfs/qgroup.c +++ b/fs/btrfs/qgroup.c @@ -1342,16 +1342,10 @@ int btrfs_quota_disable(struct btrfs_fs_info *fs_info) lockdep_assert_held_write(&fs_info->subvol_sem); /* - * Lock the cleaner mutex to prevent races with concurrent relocation, - * because relocation may be building backrefs for blocks of the quota - * root while we are deleting the root. This is like dropping fs roots - * of deleted snapshots/subvolumes, we need the same protection. - * - * This also prevents races between concurrent tasks trying to disable - * quotas, because we will unlock and relock qgroup_ioctl_lock across - * BTRFS_FS_QUOTA_ENABLED changes. + * Relocation will mess with backrefs, so make sure we have the + * cleaner_mutex held to protect us from relocate. */ - mutex_lock(&fs_info->cleaner_mutex); + lockdep_assert_held(&fs_info->cleaner_mutex); mutex_lock(&fs_info->qgroup_ioctl_lock); if (!fs_info->quota_root) @@ -1373,9 +1367,13 @@ int btrfs_quota_disable(struct btrfs_fs_info *fs_info) clear_bit(BTRFS_FS_QUOTA_ENABLED, &fs_info->flags); btrfs_qgroup_wait_for_completion(fs_info, false); + /* + * We have nothing held here and no trans handle, just return the error + * if there is one. + */ ret = flush_reservations(fs_info); if (ret) - goto out_unlock_cleaner; + return ret; /* * 1 For the root item @@ -1439,9 +1437,6 @@ out: btrfs_end_transaction(trans); else if (trans) ret = btrfs_commit_transaction(trans); -out_unlock_cleaner: - mutex_unlock(&fs_info->cleaner_mutex); - return ret; } -- cgit v1.2.3 From edbe59428eb0da09958769326a6566d4c9242ae7 Mon Sep 17 00:00:00 2001 From: Shubhrajyoti Datta Date: Thu, 25 Apr 2024 17:49:40 +0530 Subject: EDAC/versal: Do not register for NOC errors The NOC errors are not handled in the driver. Remove the request for registration. Signed-off-by: Shubhrajyoti Datta Signed-off-by: Borislav Petkov (AMD) Link: https://lore.kernel.org/r/20240425121942.26378-2-shubhrajyoti.datta@amd.com --- drivers/edac/versal_edac.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/drivers/edac/versal_edac.c b/drivers/edac/versal_edac.c index 1688a5050f63..873e7377a105 100644 --- a/drivers/edac/versal_edac.c +++ b/drivers/edac/versal_edac.c @@ -1135,8 +1135,7 @@ static int mc_probe(struct platform_device *pdev) } rc = xlnx_register_event(PM_NOTIFY_CB, VERSAL_EVENT_ERROR_PMC_ERR1, - XPM_EVENT_ERROR_MASK_DDRMC_CR | XPM_EVENT_ERROR_MASK_DDRMC_NCR | - XPM_EVENT_ERROR_MASK_NOC_CR | XPM_EVENT_ERROR_MASK_NOC_NCR, + XPM_EVENT_ERROR_MASK_DDRMC_CR | XPM_EVENT_ERROR_MASK_DDRMC_NCR, false, err_callback, mci); if (rc) { if (rc == -EACCES) @@ -1173,8 +1172,6 @@ static void mc_remove(struct platform_device *pdev) xlnx_unregister_event(PM_NOTIFY_CB, VERSAL_EVENT_ERROR_PMC_ERR1, XPM_EVENT_ERROR_MASK_DDRMC_CR | - XPM_EVENT_ERROR_MASK_NOC_CR | - XPM_EVENT_ERROR_MASK_NOC_NCR | XPM_EVENT_ERROR_MASK_DDRMC_NCR, err_callback, mci); edac_mc_del_mc(&pdev->dev); edac_mc_free(mci); -- cgit v1.2.3 From de87ba848d5e4c861b7357dd7a91698aed7a5a18 Mon Sep 17 00:00:00 2001 From: Shubhrajyoti Datta Date: Thu, 25 Apr 2024 17:49:41 +0530 Subject: EDAC/versal: Check user-supplied data before injecting an error The function inject_data_ue_store() lacks a NULL check for the user passed values. To prevent below kernel crash include a NULL check. Call trace: kstrtoull kstrtou8 inject_data_ue_store full_proxy_write vfs_write ksys_write __arm64_sys_write invoke_syscall el0_svc_common.constprop.0 do_el0_svc el0_svc el0t_64_sync_handler el0t_64_sync Fixes: 83bf24051a60 ("EDAC/versal: Make the bit position of injected errors configurable") Signed-off-by: Shubhrajyoti Datta Signed-off-by: Borislav Petkov (AMD) Link: https://lore.kernel.org/r/20240425121942.26378-3-shubhrajyoti.datta@amd.com --- drivers/edac/versal_edac.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/edac/versal_edac.c b/drivers/edac/versal_edac.c index 873e7377a105..0c50afafc3e2 100644 --- a/drivers/edac/versal_edac.c +++ b/drivers/edac/versal_edac.c @@ -865,6 +865,9 @@ static ssize_t inject_data_ue_store(struct file *file, const char __user *data, for (i = 0; i < NUM_UE_BITPOS; i++) token[i] = strsep(&pbuf, ","); + if (!token[0] || !token[1]) + return -EFAULT; + ret = kstrtou8(token[0], 0, &ue0); if (ret) return ret; -- cgit v1.2.3 From 1a24733e80771d8eef656e515306a560519856a9 Mon Sep 17 00:00:00 2001 From: Shubhrajyoti Datta Date: Thu, 25 Apr 2024 17:49:42 +0530 Subject: EDAC/versal: Do not log total error counts When logging errors, the driver currently logs the total error count. However, it should log the current error only. Fix it. [ bp: Rewrite text. ] Fixes: 6f15b178cd63 ("EDAC/versal: Add a Xilinx Versal memory controller driver") Signed-off-by: Shubhrajyoti Datta Signed-off-by: Borislav Petkov (AMD) Link: https://lore.kernel.org/r/20240425121942.26378-4-shubhrajyoti.datta@amd.com --- drivers/edac/versal_edac.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/edac/versal_edac.c b/drivers/edac/versal_edac.c index 0c50afafc3e2..a556d23e8261 100644 --- a/drivers/edac/versal_edac.c +++ b/drivers/edac/versal_edac.c @@ -425,7 +425,7 @@ static void handle_error(struct mem_ctl_info *mci, struct ecc_status *stat) convert_to_physical(priv, pinf), pinf.burstpos); edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci, - priv->ce_cnt, 0, 0, 0, 0, 0, -1, + 1, 0, 0, 0, 0, 0, -1, priv->message, ""); } @@ -438,7 +438,7 @@ static void handle_error(struct mem_ctl_info *mci, struct ecc_status *stat) convert_to_physical(priv, pinf), pinf.burstpos); edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, - priv->ue_cnt, 0, 0, 0, 0, 0, -1, + 1, 0, 0, 0, 0, 0, -1, priv->message, ""); } -- cgit v1.2.3 From 782e5e7925880f737963444f141a0320a12104a5 Mon Sep 17 00:00:00 2001 From: Ian Forbes Date: Thu, 25 Apr 2024 15:07:00 -0500 Subject: drm/vmwgfx: Fix Legacy Display Unit Legacy DU was broken by the referenced fixes commit because the placement and the busy_placement no longer pointed to the same object. This was later fixed indirectly by commit a78a8da51b36c7a0c0c16233f91d60aac03a5a49 ("drm/ttm: replace busy placement with flags v6") in v6.9. Fixes: 39985eea5a6d ("drm/vmwgfx: Abstract placement selection") Signed-off-by: Ian Forbes Cc: # v6.4+ Reviewed-by: Zack Rusin Signed-off-by: Zack Rusin Link: https://patchwork.freedesktop.org/patch/msgid/20240425200700.24403-1-ian.forbes@broadcom.com --- drivers/gpu/drm/vmwgfx/vmwgfx_bo.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_bo.c b/drivers/gpu/drm/vmwgfx/vmwgfx_bo.c index e5eb21a471a6..00144632c600 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_bo.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_bo.c @@ -204,6 +204,7 @@ int vmw_bo_pin_in_start_of_vram(struct vmw_private *dev_priv, VMW_BO_DOMAIN_VRAM, VMW_BO_DOMAIN_VRAM); buf->places[0].lpfn = PFN_UP(bo->resource->size); + buf->busy_places[0].lpfn = PFN_UP(bo->resource->size); ret = ttm_bo_validate(bo, &buf->placement, &ctx); /* For some reason we didn't end up at the start of vram */ -- cgit v1.2.3 From 27906e5d78248b19bcdfdae72049338c828897bb Mon Sep 17 00:00:00 2001 From: Zack Rusin Date: Mon, 8 Apr 2024 11:56:05 -0400 Subject: drm/ttm: Print the memory decryption status just once MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Stop printing the TT memory decryption status info each time tt is created and instead print it just once. Reduces the spam in the system logs when running guests with SEV enabled. Signed-off-by: Zack Rusin Fixes: 71ce046327cf ("drm/ttm: Make sure the mapped tt pages are decrypted when needed") Reviewed-by: Christian König Cc: Thomas Hellström Cc: dri-devel@lists.freedesktop.org Cc: linux-kernel@vger.kernel.org Cc: # v5.14+ Link: https://patchwork.freedesktop.org/patch/msgid/20240408155605.1398631-1-zack.rusin@broadcom.com --- drivers/gpu/drm/ttm/ttm_tt.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/ttm/ttm_tt.c b/drivers/gpu/drm/ttm/ttm_tt.c index 578a7c37f00b..d776e3f87064 100644 --- a/drivers/gpu/drm/ttm/ttm_tt.c +++ b/drivers/gpu/drm/ttm/ttm_tt.c @@ -92,7 +92,7 @@ int ttm_tt_create(struct ttm_buffer_object *bo, bool zero_alloc) */ if (bdev->pool.use_dma_alloc && cc_platform_has(CC_ATTR_GUEST_MEM_ENCRYPT)) { page_flags |= TTM_TT_FLAG_DECRYPTED; - drm_info(ddev, "TT memory decryption enabled."); + drm_info_once(ddev, "TT memory decryption enabled."); } bo->ttm = bdev->funcs->ttm_tt_create(bo, page_flags); -- cgit v1.2.3 From bb1dbeceb1c20cfd81271e1bd69892ebd1ee38e0 Mon Sep 17 00:00:00 2001 From: Peter Colberg Date: Mon, 22 Apr 2024 19:02:57 -0400 Subject: fpga: dfl-pci: add PCI subdevice ID for Intel D5005 card Add PCI subdevice ID for the Intel D5005 Stratix 10 FPGA card as used with the Open FPGA Stack (OFS) FPGA Interface Manager (FIM). Unlike the Intel D5005 PAC FIM which exposed a separate PCI device ID, the OFS FIM reuses the same device ID for all DFL-based FPGA cards and differentiates on the subdevice ID. The subdevice ID values were chosen as the numeric part of the FPGA card names in hexadecimal. Signed-off-by: Peter Colberg Reviewed-by: Matthew Gerlach Acked-by: Xu Yilun Link: https://lore.kernel.org/r/20240422230257.1959-1-peter.colberg@intel.com Signed-off-by: Xu Yilun --- drivers/fpga/dfl-pci.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/fpga/dfl-pci.c b/drivers/fpga/dfl-pci.c index 98b8fd16183e..80cac3a5f976 100644 --- a/drivers/fpga/dfl-pci.c +++ b/drivers/fpga/dfl-pci.c @@ -78,6 +78,7 @@ static void cci_pci_free_irq(struct pci_dev *pcidev) #define PCIE_DEVICE_ID_SILICOM_PAC_N5011 0x1001 #define PCIE_DEVICE_ID_INTEL_DFL 0xbcce /* PCI Subdevice ID for PCIE_DEVICE_ID_INTEL_DFL */ +#define PCIE_SUBDEVICE_ID_INTEL_D5005 0x138d #define PCIE_SUBDEVICE_ID_INTEL_N6000 0x1770 #define PCIE_SUBDEVICE_ID_INTEL_N6001 0x1771 #define PCIE_SUBDEVICE_ID_INTEL_C6100 0x17d4 @@ -101,6 +102,8 @@ static struct pci_device_id cci_pcie_id_tbl[] = { {PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCIE_DEVICE_ID_INTEL_PAC_D5005_VF),}, {PCI_DEVICE(PCI_VENDOR_ID_SILICOM_DENMARK, PCIE_DEVICE_ID_SILICOM_PAC_N5010),}, {PCI_DEVICE(PCI_VENDOR_ID_SILICOM_DENMARK, PCIE_DEVICE_ID_SILICOM_PAC_N5011),}, + {PCI_DEVICE_SUB(PCI_VENDOR_ID_INTEL, PCIE_DEVICE_ID_INTEL_DFL, + PCI_VENDOR_ID_INTEL, PCIE_SUBDEVICE_ID_INTEL_D5005),}, {PCI_DEVICE_SUB(PCI_VENDOR_ID_INTEL, PCIE_DEVICE_ID_INTEL_DFL, PCI_VENDOR_ID_INTEL, PCIE_SUBDEVICE_ID_INTEL_N6000),}, {PCI_DEVICE_SUB(PCI_VENDOR_ID_INTEL, PCIE_DEVICE_ID_INTEL_DFL_VF, -- cgit v1.2.3 From 58fbfecab965014b6e3cc956a76b4a96265a1add Mon Sep 17 00:00:00 2001 From: Paul Davey Date: Tue, 23 Apr 2024 18:00:24 +1200 Subject: xfrm: Preserve vlan tags for transport mode software GRO The software GRO path for esp transport mode uses skb_mac_header_rebuild prior to re-injecting the packet via the xfrm_napi_dev. This only copies skb->mac_len bytes of header which may not be sufficient if the packet contains 802.1Q tags or other VLAN tags. Worse copying only the initial header will leave a packet marked as being VLAN tagged but without the corresponding tag leading to mangling when it is later untagged. The VLAN tags are important when receiving the decrypted esp transport mode packet after GRO processing to ensure it is received on the correct interface. Therefore record the full mac header length in xfrm*_transport_input for later use in corresponding xfrm*_transport_finish to copy the entire mac header when rebuilding the mac header for GRO. The skb->data pointer is left pointing skb->mac_header bytes after the start of the mac header as is expected by the network stack and network and transport header offsets reset to this location. Fixes: 7785bba299a8 ("esp: Add a software GRO codepath") Signed-off-by: Paul Davey Signed-off-by: Steffen Klassert --- include/linux/skbuff.h | 15 +++++++++++++++ include/net/xfrm.h | 3 +++ net/ipv4/xfrm4_input.c | 6 +++++- net/ipv6/xfrm6_input.c | 6 +++++- net/xfrm/xfrm_input.c | 8 ++++++++ 5 files changed, 36 insertions(+), 2 deletions(-) diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h index 9d24aec064e8..4ff48eda3f64 100644 --- a/include/linux/skbuff.h +++ b/include/linux/skbuff.h @@ -3031,6 +3031,21 @@ static inline void skb_mac_header_rebuild(struct sk_buff *skb) } } +/* Move the full mac header up to current network_header. + * Leaves skb->data pointing at offset skb->mac_len into the mac_header. + * Must be provided the complete mac header length. + */ +static inline void skb_mac_header_rebuild_full(struct sk_buff *skb, u32 full_mac_len) +{ + if (skb_mac_header_was_set(skb)) { + const unsigned char *old_mac = skb_mac_header(skb); + + skb_set_mac_header(skb, -full_mac_len); + memmove(skb_mac_header(skb), old_mac, full_mac_len); + __skb_push(skb, full_mac_len - skb->mac_len); + } +} + static inline int skb_checksum_start_offset(const struct sk_buff *skb) { return skb->csum_start - skb_headroom(skb); diff --git a/include/net/xfrm.h b/include/net/xfrm.h index 57c743b7e4fe..cb4841a9fffd 100644 --- a/include/net/xfrm.h +++ b/include/net/xfrm.h @@ -1049,6 +1049,9 @@ struct xfrm_offload { #define CRYPTO_INVALID_PACKET_SYNTAX 64 #define CRYPTO_INVALID_PROTOCOL 128 + /* Used to keep whole l2 header for transport mode GRO */ + __u32 orig_mac_len; + __u8 proto; __u8 inner_ipproto; }; diff --git a/net/ipv4/xfrm4_input.c b/net/ipv4/xfrm4_input.c index dae35101d189..86382e08140e 100644 --- a/net/ipv4/xfrm4_input.c +++ b/net/ipv4/xfrm4_input.c @@ -63,7 +63,11 @@ int xfrm4_transport_finish(struct sk_buff *skb, int async) ip_send_check(iph); if (xo && (xo->flags & XFRM_GRO)) { - skb_mac_header_rebuild(skb); + /* The full l2 header needs to be preserved so that re-injecting the packet at l2 + * works correctly in the presence of vlan tags. + */ + skb_mac_header_rebuild_full(skb, xo->orig_mac_len); + skb_reset_network_header(skb); skb_reset_transport_header(skb); return 0; } diff --git a/net/ipv6/xfrm6_input.c b/net/ipv6/xfrm6_input.c index a17d783dc7c0..c6b8e132e10a 100644 --- a/net/ipv6/xfrm6_input.c +++ b/net/ipv6/xfrm6_input.c @@ -58,7 +58,11 @@ int xfrm6_transport_finish(struct sk_buff *skb, int async) skb_postpush_rcsum(skb, skb_network_header(skb), nhlen); if (xo && (xo->flags & XFRM_GRO)) { - skb_mac_header_rebuild(skb); + /* The full l2 header needs to be preserved so that re-injecting the packet at l2 + * works correctly in the presence of vlan tags. + */ + skb_mac_header_rebuild_full(skb, xo->orig_mac_len); + skb_reset_network_header(skb); skb_reset_transport_header(skb); return 0; } diff --git a/net/xfrm/xfrm_input.c b/net/xfrm/xfrm_input.c index 161f535c8b94..3a2982a72a6b 100644 --- a/net/xfrm/xfrm_input.c +++ b/net/xfrm/xfrm_input.c @@ -389,11 +389,15 @@ static int xfrm_prepare_input(struct xfrm_state *x, struct sk_buff *skb) */ static int xfrm4_transport_input(struct xfrm_state *x, struct sk_buff *skb) { + struct xfrm_offload *xo = xfrm_offload(skb); int ihl = skb->data - skb_transport_header(skb); if (skb->transport_header != skb->network_header) { memmove(skb_transport_header(skb), skb_network_header(skb), ihl); + if (xo) + xo->orig_mac_len = + skb_mac_header_was_set(skb) ? skb_mac_header_len(skb) : 0; skb->network_header = skb->transport_header; } ip_hdr(skb)->tot_len = htons(skb->len + ihl); @@ -404,11 +408,15 @@ static int xfrm4_transport_input(struct xfrm_state *x, struct sk_buff *skb) static int xfrm6_transport_input(struct xfrm_state *x, struct sk_buff *skb) { #if IS_ENABLED(CONFIG_IPV6) + struct xfrm_offload *xo = xfrm_offload(skb); int ihl = skb->data - skb_transport_header(skb); if (skb->transport_header != skb->network_header) { memmove(skb_transport_header(skb), skb_network_header(skb), ihl); + if (xo) + xo->orig_mac_len = + skb_mac_header_was_set(skb) ? skb_mac_header_len(skb) : 0; skb->network_header = skb->transport_header; } ipv6_hdr(skb)->payload_len = htons(skb->len + ihl - -- cgit v1.2.3 From 72c1afffa4c645fe0e0f1c03e5f34395ed65b5f4 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Thu, 25 Apr 2024 19:52:12 +0200 Subject: thermal/debugfs: Free all thermal zone debug memory on zone removal Because thermal_debug_tz_remove() does not free all memory allocated for thermal zone diagnostics, some of that memory becomes unreachable after freeing the thermal zone's struct thermal_debugfs object. Address this by making thermal_debug_tz_remove() free all of the memory in question. Fixes: 7ef01f228c9f ("thermal/debugfs: Add thermal debugfs information for mitigation episodes") Cc :6.8+ # 6.8+ Signed-off-by: Rafael J. Wysocki Reviewed-by: Lukasz Luba --- drivers/thermal/thermal_debugfs.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/drivers/thermal/thermal_debugfs.c b/drivers/thermal/thermal_debugfs.c index d78d54ae2605..8d66b3a96be1 100644 --- a/drivers/thermal/thermal_debugfs.c +++ b/drivers/thermal/thermal_debugfs.c @@ -826,15 +826,28 @@ void thermal_debug_tz_add(struct thermal_zone_device *tz) void thermal_debug_tz_remove(struct thermal_zone_device *tz) { struct thermal_debugfs *thermal_dbg = tz->debugfs; + struct tz_episode *tze, *tmp; + struct tz_debugfs *tz_dbg; + int *trips_crossed; if (!thermal_dbg) return; + tz_dbg = &thermal_dbg->tz_dbg; + mutex_lock(&thermal_dbg->lock); + trips_crossed = tz_dbg->trips_crossed; + + list_for_each_entry_safe(tze, tmp, &tz_dbg->tz_episodes, node) { + list_del(&tze->node); + kfree(tze); + } + tz->debugfs = NULL; mutex_unlock(&thermal_dbg->lock); thermal_debugfs_remove_id(thermal_dbg); + kfree(trips_crossed); } -- cgit v1.2.3 From c7f7c37271787a7f77d7eedc132b0b419a76b4c8 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Thu, 25 Apr 2024 20:00:33 +0200 Subject: thermal/debugfs: Fix two locking issues with thermal zone debug With the current thermal zone locking arrangement in the debugfs code, user space can open the "mitigations" file for a thermal zone before the zone's debugfs pointer is set which will result in a NULL pointer dereference in tze_seq_start(). Moreover, thermal_debug_tz_remove() is not called under the thermal zone lock, so it can run in parallel with the other functions accessing the thermal zone's struct thermal_debugfs object. Then, it may clear tz->debugfs after one of those functions has checked it and the struct thermal_debugfs object may be freed prematurely. To address the first problem, pass a pointer to the thermal zone's struct thermal_debugfs object to debugfs_create_file() in thermal_debug_tz_add() and make tze_seq_start(), tze_seq_next(), tze_seq_stop(), and tze_seq_show() retrieve it from s->private instead of a pointer to the thermal zone object. This will ensure that tz_debugfs will be valid across the "mitigations" file accesses until thermal_debugfs_remove_id() called by thermal_debug_tz_remove() removes that file. To address the second problem, use tz->lock in thermal_debug_tz_remove() around the tz->debugfs value check (in case the same thermal zone is removed at the same time in two different threads) and its reset to NULL. Fixes: 7ef01f228c9f ("thermal/debugfs: Add thermal debugfs information for mitigation episodes") Cc :6.8+ # 6.8+ Signed-off-by: Rafael J. Wysocki Reviewed-by: Lukasz Luba --- drivers/thermal/thermal_debugfs.c | 34 ++++++++++++++++++++++------------ 1 file changed, 22 insertions(+), 12 deletions(-) diff --git a/drivers/thermal/thermal_debugfs.c b/drivers/thermal/thermal_debugfs.c index 8d66b3a96be1..1fe2914a8853 100644 --- a/drivers/thermal/thermal_debugfs.c +++ b/drivers/thermal/thermal_debugfs.c @@ -139,11 +139,13 @@ struct tz_episode { * we keep track of the current position in the history array. * * @tz_episodes: a list of thermal mitigation episodes + * @tz: thermal zone this object belongs to * @trips_crossed: an array of trip points crossed by id * @nr_trips: the number of trip points currently being crossed */ struct tz_debugfs { struct list_head tz_episodes; + struct thermal_zone_device *tz; int *trips_crossed; int nr_trips; }; @@ -716,8 +718,7 @@ out: static void *tze_seq_start(struct seq_file *s, loff_t *pos) { - struct thermal_zone_device *tz = s->private; - struct thermal_debugfs *thermal_dbg = tz->debugfs; + struct thermal_debugfs *thermal_dbg = s->private; struct tz_debugfs *tz_dbg = &thermal_dbg->tz_dbg; mutex_lock(&thermal_dbg->lock); @@ -727,8 +728,7 @@ static void *tze_seq_start(struct seq_file *s, loff_t *pos) static void *tze_seq_next(struct seq_file *s, void *v, loff_t *pos) { - struct thermal_zone_device *tz = s->private; - struct thermal_debugfs *thermal_dbg = tz->debugfs; + struct thermal_debugfs *thermal_dbg = s->private; struct tz_debugfs *tz_dbg = &thermal_dbg->tz_dbg; return seq_list_next(v, &tz_dbg->tz_episodes, pos); @@ -736,15 +736,15 @@ static void *tze_seq_next(struct seq_file *s, void *v, loff_t *pos) static void tze_seq_stop(struct seq_file *s, void *v) { - struct thermal_zone_device *tz = s->private; - struct thermal_debugfs *thermal_dbg = tz->debugfs; + struct thermal_debugfs *thermal_dbg = s->private; mutex_unlock(&thermal_dbg->lock); } static int tze_seq_show(struct seq_file *s, void *v) { - struct thermal_zone_device *tz = s->private; + struct thermal_debugfs *thermal_dbg = s->private; + struct thermal_zone_device *tz = thermal_dbg->tz_dbg.tz; struct thermal_trip *trip; struct tz_episode *tze; const char *type; @@ -810,6 +810,8 @@ void thermal_debug_tz_add(struct thermal_zone_device *tz) tz_dbg = &thermal_dbg->tz_dbg; + tz_dbg->tz = tz; + tz_dbg->trips_crossed = kzalloc(sizeof(int) * tz->num_trips, GFP_KERNEL); if (!tz_dbg->trips_crossed) { thermal_debugfs_remove_id(thermal_dbg); @@ -818,20 +820,30 @@ void thermal_debug_tz_add(struct thermal_zone_device *tz) INIT_LIST_HEAD(&tz_dbg->tz_episodes); - debugfs_create_file("mitigations", 0400, thermal_dbg->d_top, tz, &tze_fops); + debugfs_create_file("mitigations", 0400, thermal_dbg->d_top, + thermal_dbg, &tze_fops); tz->debugfs = thermal_dbg; } void thermal_debug_tz_remove(struct thermal_zone_device *tz) { - struct thermal_debugfs *thermal_dbg = tz->debugfs; + struct thermal_debugfs *thermal_dbg; struct tz_episode *tze, *tmp; struct tz_debugfs *tz_dbg; int *trips_crossed; - if (!thermal_dbg) + mutex_lock(&tz->lock); + + thermal_dbg = tz->debugfs; + if (!thermal_dbg) { + mutex_unlock(&tz->lock); return; + } + + tz->debugfs = NULL; + + mutex_unlock(&tz->lock); tz_dbg = &thermal_dbg->tz_dbg; @@ -844,8 +856,6 @@ void thermal_debug_tz_remove(struct thermal_zone_device *tz) kfree(tze); } - tz->debugfs = NULL; - mutex_unlock(&thermal_dbg->lock); thermal_debugfs_remove_id(thermal_dbg); -- cgit v1.2.3 From d351eb0ab04c3e8109895fc33250cebbce9c11da Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Fri, 26 Apr 2024 11:10:10 +0200 Subject: thermal/debugfs: Prevent use-after-free from occurring after cdev removal Since thermal_debug_cdev_remove() does not run under cdev->lock, it can run in parallel with thermal_debug_cdev_state_update() and it may free the struct thermal_debugfs object used by the latter after it has been checked against NULL. If that happens, thermal_debug_cdev_state_update() will access memory that has been freed already causing the kernel to crash. Address this by using cdev->lock in thermal_debug_cdev_remove() around the cdev->debugfs value check (in case the same cdev is removed at the same time in two different threads) and its reset to NULL. Fixes: 755113d76786 ("thermal/debugfs: Add thermal cooling device debugfs information") Cc :6.8+ # 6.8+ Signed-off-by: Rafael J. Wysocki Reviewed-by: Lukasz Luba --- drivers/thermal/thermal_debugfs.c | 14 +++++++++++--- 1 file changed, 11 insertions(+), 3 deletions(-) diff --git a/drivers/thermal/thermal_debugfs.c b/drivers/thermal/thermal_debugfs.c index 1fe2914a8853..5693cc8b231a 100644 --- a/drivers/thermal/thermal_debugfs.c +++ b/drivers/thermal/thermal_debugfs.c @@ -505,15 +505,23 @@ void thermal_debug_cdev_add(struct thermal_cooling_device *cdev) */ void thermal_debug_cdev_remove(struct thermal_cooling_device *cdev) { - struct thermal_debugfs *thermal_dbg = cdev->debugfs; + struct thermal_debugfs *thermal_dbg; - if (!thermal_dbg) + mutex_lock(&cdev->lock); + + thermal_dbg = cdev->debugfs; + if (!thermal_dbg) { + mutex_unlock(&cdev->lock); return; + } + + cdev->debugfs = NULL; + + mutex_unlock(&cdev->lock); mutex_lock(&thermal_dbg->lock); thermal_debugfs_cdev_clear(&thermal_dbg->cdev_dbg); - cdev->debugfs = NULL; mutex_unlock(&thermal_dbg->lock); -- cgit v1.2.3 From 5e1a99cf22a65bd91cb43c5380cc14a44b85ad2a Mon Sep 17 00:00:00 2001 From: Sven Schnelle Date: Tue, 23 Apr 2024 07:57:49 +0200 Subject: s390/3270: Fix buffer assignment Since commit 1b2ac5a6d61f ("s390/3270: use new address translation helpers") rq->buffer is passed unconditionally to virt_to_dma32(). The 3270 driver allocates requests without buffer, so the value passed to virt_to_dma32 might be NULL. Check for NULL before assigning. Fixes: 1b2ac5a6d61f ("s390/3270: use new address translation helpers") Reviewed-by: Heiko Carstens Signed-off-by: Sven Schnelle Signed-off-by: Alexander Gordeev --- drivers/s390/char/raw3270.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/s390/char/raw3270.c b/drivers/s390/char/raw3270.c index 37173cb0f5f5..c57694be9bd3 100644 --- a/drivers/s390/char/raw3270.c +++ b/drivers/s390/char/raw3270.c @@ -162,7 +162,8 @@ struct raw3270_request *raw3270_request_alloc(size_t size) /* * Setup ccw. */ - rq->ccw.cda = virt_to_dma32(rq->buffer); + if (rq->buffer) + rq->ccw.cda = virt_to_dma32(rq->buffer); rq->ccw.flags = CCW_FLAG_SLI; return rq; @@ -188,7 +189,8 @@ int raw3270_request_reset(struct raw3270_request *rq) return -EBUSY; rq->ccw.cmd_code = 0; rq->ccw.count = 0; - rq->ccw.cda = virt_to_dma32(rq->buffer); + if (rq->buffer) + rq->ccw.cda = virt_to_dma32(rq->buffer); rq->ccw.flags = CCW_FLAG_SLI; rq->rescnt = 0; rq->rc = 0; -- cgit v1.2.3 From b961ec10b9f9719987470236feb50c967db5a652 Mon Sep 17 00:00:00 2001 From: Jens Remus Date: Tue, 23 Apr 2024 17:35:52 +0200 Subject: s390/vdso: Add CFI for RA register to asm macro vdso_func The return-address (RA) register r14 is specified as volatile in the s390x ELF ABI [1]. Nevertheless proper CFI directives must be provided for an unwinder to restore the return address, if the RA register value is changed from its value at function entry, as it is the case. [1]: s390x ELF ABI, https://github.com/IBM/s390x-abi/releases Fixes: 4bff8cb54502 ("s390: convert to GENERIC_VDSO") Signed-off-by: Jens Remus Acked-by: Heiko Carstens Signed-off-by: Alexander Gordeev --- arch/s390/include/asm/dwarf.h | 1 + arch/s390/kernel/vdso64/vdso_user_wrapper.S | 2 ++ 2 files changed, 3 insertions(+) diff --git a/arch/s390/include/asm/dwarf.h b/arch/s390/include/asm/dwarf.h index 4f21ae561e4d..390906b8e386 100644 --- a/arch/s390/include/asm/dwarf.h +++ b/arch/s390/include/asm/dwarf.h @@ -9,6 +9,7 @@ #define CFI_DEF_CFA_OFFSET .cfi_def_cfa_offset #define CFI_ADJUST_CFA_OFFSET .cfi_adjust_cfa_offset #define CFI_RESTORE .cfi_restore +#define CFI_REL_OFFSET .cfi_rel_offset #ifdef CONFIG_AS_CFI_VAL_OFFSET #define CFI_VAL_OFFSET .cfi_val_offset diff --git a/arch/s390/kernel/vdso64/vdso_user_wrapper.S b/arch/s390/kernel/vdso64/vdso_user_wrapper.S index 57f62596e53b..85247ef5a41b 100644 --- a/arch/s390/kernel/vdso64/vdso_user_wrapper.S +++ b/arch/s390/kernel/vdso64/vdso_user_wrapper.S @@ -24,8 +24,10 @@ __kernel_\func: CFI_DEF_CFA_OFFSET (STACK_FRAME_OVERHEAD + WRAPPER_FRAME_SIZE) CFI_VAL_OFFSET 15, -STACK_FRAME_OVERHEAD stg %r14,STACK_FRAME_OVERHEAD(%r15) + CFI_REL_OFFSET 14, STACK_FRAME_OVERHEAD brasl %r14,__s390_vdso_\func lg %r14,STACK_FRAME_OVERHEAD(%r15) + CFI_RESTORE 14 aghi %r15,WRAPPER_FRAME_SIZE CFI_DEF_CFA_OFFSET STACK_FRAME_OVERHEAD CFI_RESTORE 15 -- cgit v1.2.3 From 398321d7531963b95841865eb371fe65c44c6921 Mon Sep 17 00:00:00 2001 From: Oswald Buddenhagen Date: Sun, 28 Apr 2024 11:37:11 +0200 Subject: ALSA: emu10k1: fix E-MU card dock presence monitoring While there are two separate IRQ status bits for dock attach and detach, the hardware appears to mix them up more or less randomly, making them useless for tracking what actually happened. It is much safer to check the dock status separately and proceed based on that, as the old polling code did. Note that the code assumes that only the dock can be hot-plugged - if other option card bits changed, the logic would break. Fixes: fbb64eedf5a3 ("ALSA: emu10k1: make E-MU dock monitoring interrupt-driven") Link: https://bugzilla.kernel.org/show_bug.cgi?id=218584 Signed-off-by: Oswald Buddenhagen Signed-off-by: Takashi Iwai Message-ID: <20240428093716.3198666-2-oswald.buddenhagen@gmx.de> --- sound/pci/emu10k1/emu10k1_main.c | 17 ++++++++++------- 1 file changed, 10 insertions(+), 7 deletions(-) diff --git a/sound/pci/emu10k1/emu10k1_main.c b/sound/pci/emu10k1/emu10k1_main.c index de5c41e578e1..85f70368a27d 100644 --- a/sound/pci/emu10k1/emu10k1_main.c +++ b/sound/pci/emu10k1/emu10k1_main.c @@ -778,6 +778,11 @@ static void emu1010_firmware_work(struct work_struct *work) msleep(10); /* Unmute all. Default is muted after a firmware load */ snd_emu1010_fpga_write(emu, EMU_HANA_UNMUTE, EMU_UNMUTE); + } else if (!(reg & EMU_HANA_OPTION_DOCK_ONLINE)) { + /* Audio Dock removed */ + dev_info(emu->card->dev, "emu1010: Audio Dock detached\n"); + /* The hardware auto-mutes all, so we unmute again */ + snd_emu1010_fpga_write(emu, EMU_HANA_UNMUTE, EMU_UNMUTE); } } @@ -810,14 +815,12 @@ static void emu1010_interrupt(struct snd_emu10k1 *emu) u32 sts; snd_emu1010_fpga_read(emu, EMU_HANA_IRQ_STATUS, &sts); - if (sts & EMU_HANA_IRQ_DOCK_LOST) { - /* Audio Dock removed */ - dev_info(emu->card->dev, "emu1010: Audio Dock detached\n"); - /* The hardware auto-mutes all, so we unmute again */ - snd_emu1010_fpga_write(emu, EMU_HANA_UNMUTE, EMU_UNMUTE); - } else if (sts & EMU_HANA_IRQ_DOCK) { + + // The distinction of the IRQ status bits is unreliable, + // so we dispatch later based on option card status. + if (sts & (EMU_HANA_IRQ_DOCK | EMU_HANA_IRQ_DOCK_LOST)) schedule_work(&emu->emu1010.firmware_work); - } + if (sts & EMU_HANA_IRQ_WCLK_CHANGED) schedule_work(&emu->emu1010.clock_work); } -- cgit v1.2.3 From 28deafd0fbdc45cc9c63bd7dd4efc35137958862 Mon Sep 17 00:00:00 2001 From: Oswald Buddenhagen Date: Sun, 28 Apr 2024 11:37:12 +0200 Subject: ALSA: emu10k1: factor out snd_emu1010_load_dock_firmware() Pulled out of the next patch to improve its legibility. As the function is now available, call it directly from snd_emu10k1_emu1010_init(), thus making the MicroDock firmware loading synchronous - there isn't really a reason not to. Note that this does not affect the AudioDocks of rev1 cards, as these have no independent power supplies, and thus come up only a while after the main card is initialized. As a drive-by, adjust the priorities of two messages to better reflect their impact. Signed-off-by: Oswald Buddenhagen Signed-off-by: Takashi Iwai Message-ID: <20240428093716.3198666-3-oswald.buddenhagen@gmx.de> --- sound/pci/emu10k1/emu10k1_main.c | 66 ++++++++++++++++++++++------------------ 1 file changed, 36 insertions(+), 30 deletions(-) diff --git a/sound/pci/emu10k1/emu10k1_main.c b/sound/pci/emu10k1/emu10k1_main.c index 85f70368a27d..6265fc9ae260 100644 --- a/sound/pci/emu10k1/emu10k1_main.c +++ b/sound/pci/emu10k1/emu10k1_main.c @@ -732,11 +732,43 @@ static int snd_emu1010_load_firmware(struct snd_emu10k1 *emu, int dock, return snd_emu1010_load_firmware_entry(emu, *fw); } +static void snd_emu1010_load_dock_firmware(struct snd_emu10k1 *emu) +{ + u32 tmp, tmp2; + int err; + + dev_info(emu->card->dev, "emu1010: Loading Audio Dock Firmware\n"); + /* Return to Audio Dock programming mode */ + snd_emu1010_fpga_write(emu, EMU_HANA_FPGA_CONFIG, + EMU_HANA_FPGA_CONFIG_AUDIODOCK); + err = snd_emu1010_load_firmware(emu, 1, &emu->dock_fw); + if (err < 0) + return; + snd_emu1010_fpga_write(emu, EMU_HANA_FPGA_CONFIG, 0); + + snd_emu1010_fpga_read(emu, EMU_HANA_ID, &tmp); + dev_dbg(emu->card->dev, "emu1010: EMU_HANA+DOCK_ID = 0x%x\n", tmp); + if ((tmp & 0x1f) != 0x15) { + /* FPGA failed to be programmed */ + dev_err(emu->card->dev, + "emu1010: Loading Audio Dock Firmware failed, reg = 0x%x\n", + tmp); + return; + } + dev_info(emu->card->dev, "emu1010: Audio Dock Firmware loaded\n"); + + snd_emu1010_fpga_read(emu, EMU_DOCK_MAJOR_REV, &tmp); + snd_emu1010_fpga_read(emu, EMU_DOCK_MINOR_REV, &tmp2); + dev_info(emu->card->dev, "Audio Dock ver: %u.%u\n", tmp, tmp2); + + /* Allow DLL to settle, to sync clocking between 1010 and Dock */ + msleep(10); +} + static void emu1010_firmware_work(struct work_struct *work) { struct snd_emu10k1 *emu; - u32 tmp, tmp2, reg; - int err; + u32 reg; emu = container_of(work, struct snd_emu10k1, emu1010.firmware_work); @@ -749,33 +781,7 @@ static void emu1010_firmware_work(struct work_struct *work) snd_emu1010_fpga_read(emu, EMU_HANA_OPTION_CARDS, ®); /* OPTIONS: Which cards are attached to the EMU */ if (reg & EMU_HANA_OPTION_DOCK_OFFLINE) { /* Audio Dock attached */ - /* Return to Audio Dock programming mode */ - dev_info(emu->card->dev, - "emu1010: Loading Audio Dock Firmware\n"); - snd_emu1010_fpga_write(emu, EMU_HANA_FPGA_CONFIG, - EMU_HANA_FPGA_CONFIG_AUDIODOCK); - err = snd_emu1010_load_firmware(emu, 1, &emu->dock_fw); - if (err < 0) - return; - snd_emu1010_fpga_write(emu, EMU_HANA_FPGA_CONFIG, 0); - snd_emu1010_fpga_read(emu, EMU_HANA_ID, &tmp); - dev_info(emu->card->dev, - "emu1010: EMU_HANA+DOCK_ID = 0x%x\n", tmp); - if ((tmp & 0x1f) != 0x15) { - /* FPGA failed to be programmed */ - dev_info(emu->card->dev, - "emu1010: Loading Audio Dock Firmware file failed, reg = 0x%x\n", - tmp); - return; - } - dev_info(emu->card->dev, - "emu1010: Audio Dock Firmware loaded\n"); - snd_emu1010_fpga_read(emu, EMU_DOCK_MAJOR_REV, &tmp); - snd_emu1010_fpga_read(emu, EMU_DOCK_MINOR_REV, &tmp2); - dev_info(emu->card->dev, "Audio Dock ver: %u.%u\n", tmp, tmp2); - /* Sync clocking between 1010 and Dock */ - /* Allow DLL to settle */ - msleep(10); + snd_emu1010_load_dock_firmware(emu); /* Unmute all. Default is muted after a firmware load */ snd_emu1010_fpga_write(emu, EMU_HANA_UNMUTE, EMU_UNMUTE); } else if (!(reg & EMU_HANA_OPTION_DOCK_ONLINE)) { @@ -892,7 +898,7 @@ static int snd_emu10k1_emu1010_init(struct snd_emu10k1 *emu) snd_emu1010_fpga_read(emu, EMU_HANA_OPTION_CARDS, ®); dev_info(emu->card->dev, "emu1010: Card options = 0x%x\n", reg); if (reg & EMU_HANA_OPTION_DOCK_OFFLINE) - schedule_work(&emu->emu1010.firmware_work); + snd_emu1010_load_dock_firmware(emu); if (emu->card_capabilities->no_adat) { emu->emu1010.optical_in = 0; /* IN_SPDIF */ emu->emu1010.optical_out = 0; /* OUT_SPDIF */ -- cgit v1.2.3 From f848337cd801c7106a4ec0d61765771dab2a5909 Mon Sep 17 00:00:00 2001 From: Oswald Buddenhagen Date: Sun, 28 Apr 2024 11:37:13 +0200 Subject: ALSA: emu10k1: move the whole GPIO event handling to the workqueue The actual event processing was already done by workqueue items. We can move the event dispatching there as well, rather than doing it already in the interrupt handler callback. This change has a rather profound "side effect" on the reliability of the FPGA programming: once we enter programming mode, we must not issue any snd_emu1010_fpga_{read,write}() calls until we're done, as these would badly mess up the programming protocol. But exactly that would happen when trying to program the dock, as that triggers GPIO interrupts as a side effect. This is mitigated by deferring the actual interrupt handling, as workqueue items are not re-entrant. To avoid scheduling the dispatcher on non-events, we now explicitly ignore GPIO IRQs triggered by "uninteresting" pins, which happens a lot as a side effect of calling snd_emu1010_fpga_{read,write}(). Fixes: fbb64eedf5a3 ("ALSA: emu10k1: make E-MU dock monitoring interrupt-driven") Link: https://bugzilla.kernel.org/show_bug.cgi?id=218584 Signed-off-by: Oswald Buddenhagen Signed-off-by: Takashi Iwai Message-ID: <20240428093716.3198666-4-oswald.buddenhagen@gmx.de> --- include/sound/emu10k1.h | 3 +-- sound/pci/emu10k1/emu10k1.c | 3 +-- sound/pci/emu10k1/emu10k1_main.c | 56 ++++++++++++++++++++-------------------- 3 files changed, 30 insertions(+), 32 deletions(-) diff --git a/include/sound/emu10k1.h b/include/sound/emu10k1.h index 1af9e6819392..9cc10fab01a8 100644 --- a/include/sound/emu10k1.h +++ b/include/sound/emu10k1.h @@ -1684,8 +1684,7 @@ struct snd_emu1010 { unsigned int clock_fallback; unsigned int optical_in; /* 0:SPDIF, 1:ADAT */ unsigned int optical_out; /* 0:SPDIF, 1:ADAT */ - struct work_struct firmware_work; - struct work_struct clock_work; + struct work_struct work; }; struct snd_emu10k1 { diff --git a/sound/pci/emu10k1/emu10k1.c b/sound/pci/emu10k1/emu10k1.c index fe72e7d77241..dadeda7758ce 100644 --- a/sound/pci/emu10k1/emu10k1.c +++ b/sound/pci/emu10k1/emu10k1.c @@ -189,8 +189,7 @@ static int snd_emu10k1_suspend(struct device *dev) emu->suspend = 1; - cancel_work_sync(&emu->emu1010.firmware_work); - cancel_work_sync(&emu->emu1010.clock_work); + cancel_work_sync(&emu->emu1010.work); snd_ac97_suspend(emu->ac97); diff --git a/sound/pci/emu10k1/emu10k1_main.c b/sound/pci/emu10k1/emu10k1_main.c index 6265fc9ae260..86eaf5963502 100644 --- a/sound/pci/emu10k1/emu10k1_main.c +++ b/sound/pci/emu10k1/emu10k1_main.c @@ -765,19 +765,10 @@ static void snd_emu1010_load_dock_firmware(struct snd_emu10k1 *emu) msleep(10); } -static void emu1010_firmware_work(struct work_struct *work) +static void emu1010_dock_event(struct snd_emu10k1 *emu) { - struct snd_emu10k1 *emu; u32 reg; - emu = container_of(work, struct snd_emu10k1, - emu1010.firmware_work); - if (emu->card->shutdown) - return; -#ifdef CONFIG_PM_SLEEP - if (emu->suspend) - return; -#endif snd_emu1010_fpga_read(emu, EMU_HANA_OPTION_CARDS, ®); /* OPTIONS: Which cards are attached to the EMU */ if (reg & EMU_HANA_OPTION_DOCK_OFFLINE) { /* Audio Dock attached */ @@ -792,20 +783,10 @@ static void emu1010_firmware_work(struct work_struct *work) } } -static void emu1010_clock_work(struct work_struct *work) +static void emu1010_clock_event(struct snd_emu10k1 *emu) { - struct snd_emu10k1 *emu; struct snd_ctl_elem_id id; - emu = container_of(work, struct snd_emu10k1, - emu1010.clock_work); - if (emu->card->shutdown) - return; -#ifdef CONFIG_PM_SLEEP - if (emu->suspend) - return; -#endif - spin_lock_irq(&emu->reg_lock); // This is the only thing that can actually happen. emu->emu1010.clock_source = emu->emu1010.clock_fallback; @@ -816,19 +797,40 @@ static void emu1010_clock_work(struct work_struct *work) snd_ctl_notify(emu->card, SNDRV_CTL_EVENT_MASK_VALUE, &id); } -static void emu1010_interrupt(struct snd_emu10k1 *emu) +static void emu1010_work(struct work_struct *work) { + struct snd_emu10k1 *emu; u32 sts; + emu = container_of(work, struct snd_emu10k1, emu1010.work); + if (emu->card->shutdown) + return; +#ifdef CONFIG_PM_SLEEP + if (emu->suspend) + return; +#endif + snd_emu1010_fpga_read(emu, EMU_HANA_IRQ_STATUS, &sts); // The distinction of the IRQ status bits is unreliable, // so we dispatch later based on option card status. if (sts & (EMU_HANA_IRQ_DOCK | EMU_HANA_IRQ_DOCK_LOST)) - schedule_work(&emu->emu1010.firmware_work); + emu1010_dock_event(emu); if (sts & EMU_HANA_IRQ_WCLK_CHANGED) - schedule_work(&emu->emu1010.clock_work); + emu1010_clock_event(emu); +} + +static void emu1010_interrupt(struct snd_emu10k1 *emu) +{ + // We get an interrupt on each GPIO input pin change, but we + // care only about the ones triggered by the dedicated pin. + u16 sts = inw(emu->port + A_GPIO); + u16 bit = emu->card_capabilities->ca0108_chip ? 0x2000 : 0x8000; + if (!(sts & bit)) + return; + + schedule_work(&emu->emu1010.work); } /* @@ -969,8 +971,7 @@ static void snd_emu10k1_free(struct snd_card *card) /* Disable 48Volt power to Audio Dock */ snd_emu1010_fpga_write(emu, EMU_HANA_DOCK_PWR, 0); } - cancel_work_sync(&emu->emu1010.firmware_work); - cancel_work_sync(&emu->emu1010.clock_work); + cancel_work_sync(&emu->emu1010.work); release_firmware(emu->firmware); release_firmware(emu->dock_fw); snd_util_memhdr_free(emu->memhdr); @@ -1549,8 +1550,7 @@ int snd_emu10k1_create(struct snd_card *card, emu->irq = -1; emu->synth = NULL; emu->get_synth_voice = NULL; - INIT_WORK(&emu->emu1010.firmware_work, emu1010_firmware_work); - INIT_WORK(&emu->emu1010.clock_work, emu1010_clock_work); + INIT_WORK(&emu->emu1010.work, emu1010_work); /* read revision & serial */ emu->revision = pci->revision; pci_read_config_dword(pci, PCI_SUBSYSTEM_VENDOR_ID, &emu->serial); -- cgit v1.2.3 From 2d3f4810886eb7c319cec41b6d725d2953bfa88a Mon Sep 17 00:00:00 2001 From: Oswald Buddenhagen Date: Sun, 28 Apr 2024 11:37:14 +0200 Subject: ALSA: emu10k1: use mutex for E-MU FPGA access locking The FPGA access through the GPIO port does not interfere with other sound processor register access, so there is no need to subject it to emu_lock. And after moving all FPGA access out of the interrupt handler, it does not need to be IRQ-safe, either. What's more, attaching the dock causes a firmware upload, which takes several seconds. We really don't want to disable IRQs for this long, and even less also have someone else spin with IRQs disabled waiting for us. Therefore, use a mutex for FPGA access locking. This makes the code somewhat more noisy, as we need to wrap bigger sections into the mutex, as it needs to enclose the spinlocks. The latter has the "side effect" of fixing dock FPGA programming in a corner case: a really badly timed mixer access right between entering FPGA programming mode and uploading the netlist would mess up the protocol. Signed-off-by: Oswald Buddenhagen Signed-off-by: Takashi Iwai Message-ID: <20240428093716.3198666-5-oswald.buddenhagen@gmx.de> --- include/sound/emu10k1.h | 4 ++++ sound/pci/emu10k1/emu10k1_main.c | 19 ++++++++++++---- sound/pci/emu10k1/emumixer.c | 18 ++++++++++----- sound/pci/emu10k1/emuproc.c | 9 ++++++++ sound/pci/emu10k1/io.c | 48 +++++++++++++++++----------------------- 5 files changed, 61 insertions(+), 37 deletions(-) diff --git a/include/sound/emu10k1.h b/include/sound/emu10k1.h index 9cc10fab01a8..234b5baea69c 100644 --- a/include/sound/emu10k1.h +++ b/include/sound/emu10k1.h @@ -1685,6 +1685,7 @@ struct snd_emu1010 { unsigned int optical_in; /* 0:SPDIF, 1:ADAT */ unsigned int optical_out; /* 0:SPDIF, 1:ADAT */ struct work_struct work; + struct mutex lock; }; struct snd_emu10k1 { @@ -1833,6 +1834,9 @@ unsigned int snd_emu10k1_ptr20_read(struct snd_emu10k1 * emu, unsigned int reg, void snd_emu10k1_ptr20_write(struct snd_emu10k1 *emu, unsigned int reg, unsigned int chn, unsigned int data); int snd_emu10k1_spi_write(struct snd_emu10k1 * emu, unsigned int data); int snd_emu10k1_i2c_write(struct snd_emu10k1 *emu, u32 reg, u32 value); +static inline void snd_emu1010_fpga_lock(struct snd_emu10k1 *emu) { mutex_lock(&emu->emu1010.lock); }; +static inline void snd_emu1010_fpga_unlock(struct snd_emu10k1 *emu) { mutex_unlock(&emu->emu1010.lock); }; +void snd_emu1010_fpga_write_lock(struct snd_emu10k1 *emu, u32 reg, u32 value); void snd_emu1010_fpga_write(struct snd_emu10k1 *emu, u32 reg, u32 value); void snd_emu1010_fpga_read(struct snd_emu10k1 *emu, u32 reg, u32 *value); void snd_emu1010_fpga_link_dst_src_write(struct snd_emu10k1 *emu, u32 dst, u32 src); diff --git a/sound/pci/emu10k1/emu10k1_main.c b/sound/pci/emu10k1/emu10k1_main.c index 86eaf5963502..1a2905e8672b 100644 --- a/sound/pci/emu10k1/emu10k1_main.c +++ b/sound/pci/emu10k1/emu10k1_main.c @@ -810,6 +810,8 @@ static void emu1010_work(struct work_struct *work) return; #endif + snd_emu1010_fpga_lock(emu); + snd_emu1010_fpga_read(emu, EMU_HANA_IRQ_STATUS, &sts); // The distinction of the IRQ status bits is unreliable, @@ -819,6 +821,8 @@ static void emu1010_work(struct work_struct *work) if (sts & EMU_HANA_IRQ_WCLK_CHANGED) emu1010_clock_event(emu); + + snd_emu1010_fpga_unlock(emu); } static void emu1010_interrupt(struct snd_emu10k1 *emu) @@ -852,6 +856,8 @@ static int snd_emu10k1_emu1010_init(struct snd_emu10k1 *emu) * Proper init follows in snd_emu10k1_init(). */ outl(HCFG_LOCKSOUNDCACHE | HCFG_LOCKTANKCACHE_MASK, emu->port + HCFG); + snd_emu1010_fpga_lock(emu); + /* Disable 48Volt power to Audio Dock */ snd_emu1010_fpga_write(emu, EMU_HANA_DOCK_PWR, 0); @@ -877,7 +883,7 @@ static int snd_emu10k1_emu1010_init(struct snd_emu10k1 *emu) err = snd_emu1010_load_firmware(emu, 0, &emu->firmware); if (err < 0) { dev_info(emu->card->dev, "emu1010: Loading Firmware failed\n"); - return err; + goto fail; } /* ID, should read & 0x7f = 0x55 when FPGA programmed. */ @@ -887,7 +893,8 @@ static int snd_emu10k1_emu1010_init(struct snd_emu10k1 *emu) dev_info(emu->card->dev, "emu1010: Loading Hana Firmware file failed, reg = 0x%x\n", reg); - return -ENODEV; + err = -ENODEV; + goto fail; } dev_info(emu->card->dev, "emu1010: Hana Firmware loaded\n"); @@ -947,7 +954,9 @@ static int snd_emu10k1_emu1010_init(struct snd_emu10k1 *emu) // so it is safe to simply enable the outputs. snd_emu1010_fpga_write(emu, EMU_HANA_UNMUTE, EMU_UNMUTE); - return 0; +fail: + snd_emu1010_fpga_unlock(emu); + return err; } /* * Create the EMU10K1 instance @@ -969,9 +978,10 @@ static void snd_emu10k1_free(struct snd_card *card) } if (emu->card_capabilities->emu_model == EMU_MODEL_EMU1010) { /* Disable 48Volt power to Audio Dock */ - snd_emu1010_fpga_write(emu, EMU_HANA_DOCK_PWR, 0); + snd_emu1010_fpga_write_lock(emu, EMU_HANA_DOCK_PWR, 0); } cancel_work_sync(&emu->emu1010.work); + mutex_destroy(&emu->emu1010.lock); release_firmware(emu->firmware); release_firmware(emu->dock_fw); snd_util_memhdr_free(emu->memhdr); @@ -1551,6 +1561,7 @@ int snd_emu10k1_create(struct snd_card *card, emu->synth = NULL; emu->get_synth_voice = NULL; INIT_WORK(&emu->emu1010.work, emu1010_work); + mutex_init(&emu->emu1010.lock); /* read revision & serial */ emu->revision = pci->revision; pci_read_config_dword(pci, PCI_SUBSYSTEM_VENDOR_ID, &emu->serial); diff --git a/sound/pci/emu10k1/emumixer.c b/sound/pci/emu10k1/emumixer.c index 0a32ea53d8c6..05b98d9b547b 100644 --- a/sound/pci/emu10k1/emumixer.c +++ b/sound/pci/emu10k1/emumixer.c @@ -661,7 +661,9 @@ static int snd_emu1010_output_source_put(struct snd_kcontrol *kcontrol, change = (emu->emu1010.output_source[channel] != val); if (change) { emu->emu1010.output_source[channel] = val; + snd_emu1010_fpga_lock(emu); snd_emu1010_output_source_apply(emu, channel, val); + snd_emu1010_fpga_unlock(emu); } return change; } @@ -705,7 +707,9 @@ static int snd_emu1010_input_source_put(struct snd_kcontrol *kcontrol, change = (emu->emu1010.input_source[channel] != val); if (change) { emu->emu1010.input_source[channel] = val; + snd_emu1010_fpga_lock(emu); snd_emu1010_input_source_apply(emu, channel, val); + snd_emu1010_fpga_unlock(emu); } return change; } @@ -774,7 +778,7 @@ static int snd_emu1010_adc_pads_put(struct snd_kcontrol *kcontrol, struct snd_ct cache = cache & ~mask; change = (cache != emu->emu1010.adc_pads); if (change) { - snd_emu1010_fpga_write(emu, EMU_HANA_ADC_PADS, cache ); + snd_emu1010_fpga_write_lock(emu, EMU_HANA_ADC_PADS, cache ); emu->emu1010.adc_pads = cache; } @@ -832,7 +836,7 @@ static int snd_emu1010_dac_pads_put(struct snd_kcontrol *kcontrol, struct snd_ct cache = cache & ~mask; change = (cache != emu->emu1010.dac_pads); if (change) { - snd_emu1010_fpga_write(emu, EMU_HANA_DAC_PADS, cache ); + snd_emu1010_fpga_write_lock(emu, EMU_HANA_DAC_PADS, cache ); emu->emu1010.dac_pads = cache; } @@ -980,6 +984,7 @@ static int snd_emu1010_clock_source_put(struct snd_kcontrol *kcontrol, val = ucontrol->value.enumerated.item[0] ; if (val >= emu_ci->num) return -EINVAL; + snd_emu1010_fpga_lock(emu); spin_lock_irq(&emu->reg_lock); change = (emu->emu1010.clock_source != val); if (change) { @@ -996,6 +1001,7 @@ static int snd_emu1010_clock_source_put(struct snd_kcontrol *kcontrol, } else { spin_unlock_irq(&emu->reg_lock); } + snd_emu1010_fpga_unlock(emu); return change; } @@ -1041,7 +1047,7 @@ static int snd_emu1010_clock_fallback_put(struct snd_kcontrol *kcontrol, change = (emu->emu1010.clock_fallback != val); if (change) { emu->emu1010.clock_fallback = val; - snd_emu1010_fpga_write(emu, EMU_HANA_DEFCLOCK, 1 - val); + snd_emu1010_fpga_write_lock(emu, EMU_HANA_DEFCLOCK, 1 - val); } return change; } @@ -1093,7 +1099,7 @@ static int snd_emu1010_optical_out_put(struct snd_kcontrol *kcontrol, emu->emu1010.optical_out = val; tmp = (emu->emu1010.optical_in ? EMU_HANA_OPTICAL_IN_ADAT : EMU_HANA_OPTICAL_IN_SPDIF) | (emu->emu1010.optical_out ? EMU_HANA_OPTICAL_OUT_ADAT : EMU_HANA_OPTICAL_OUT_SPDIF); - snd_emu1010_fpga_write(emu, EMU_HANA_OPTICAL_TYPE, tmp); + snd_emu1010_fpga_write_lock(emu, EMU_HANA_OPTICAL_TYPE, tmp); } return change; } @@ -1144,7 +1150,7 @@ static int snd_emu1010_optical_in_put(struct snd_kcontrol *kcontrol, emu->emu1010.optical_in = val; tmp = (emu->emu1010.optical_in ? EMU_HANA_OPTICAL_IN_ADAT : EMU_HANA_OPTICAL_IN_SPDIF) | (emu->emu1010.optical_out ? EMU_HANA_OPTICAL_OUT_ADAT : EMU_HANA_OPTICAL_OUT_SPDIF); - snd_emu1010_fpga_write(emu, EMU_HANA_OPTICAL_TYPE, tmp); + snd_emu1010_fpga_write_lock(emu, EMU_HANA_OPTICAL_TYPE, tmp); } return change; } @@ -2323,7 +2329,9 @@ int snd_emu10k1_mixer(struct snd_emu10k1 *emu, for (i = 0; i < emu_ri->n_outs; i++) emu->emu1010.output_source[i] = emu1010_map_source(emu_ri, emu_ri->out_dflts[i]); + snd_emu1010_fpga_lock(emu); snd_emu1010_apply_sources(emu); + snd_emu1010_fpga_unlock(emu); kctl = emu->ctl_clock_source = snd_ctl_new1(&snd_emu1010_clock_source, emu); err = snd_ctl_add(card, kctl); diff --git a/sound/pci/emu10k1/emuproc.c b/sound/pci/emu10k1/emuproc.c index 2f80fd91017c..737c28d31b41 100644 --- a/sound/pci/emu10k1/emuproc.c +++ b/sound/pci/emu10k1/emuproc.c @@ -165,6 +165,8 @@ static void snd_emu10k1_proc_spdif_read(struct snd_info_entry *entry, u32 value2; if (emu->card_capabilities->emu_model) { + snd_emu1010_fpga_lock(emu); + // This represents the S/PDIF lock status on 0404b, which is // kinda weird and unhelpful, because monitoring it via IRQ is // impractical (one gets an IRQ flood as long as it is desynced). @@ -197,6 +199,8 @@ static void snd_emu10k1_proc_spdif_read(struct snd_info_entry *entry, snd_iprintf(buffer, "\nS/PDIF mode: %s%s\n", value & EMU_HANA_SPDIF_MODE_RX_PRO ? "professional" : "consumer", value & EMU_HANA_SPDIF_MODE_RX_NOCOPY ? ", no copy" : ""); + + snd_emu1010_fpga_unlock(emu); } else { snd_emu10k1_proc_spdif_status(emu, buffer, "CD-ROM S/PDIF In", CDCS, CDSRCS); snd_emu10k1_proc_spdif_status(emu, buffer, "Optical or Coax S/PDIF In", GPSCS, GPSRCS); @@ -458,6 +462,9 @@ static void snd_emu_proc_emu1010_reg_read(struct snd_info_entry *entry, struct snd_emu10k1 *emu = entry->private_data; u32 value; int i; + + snd_emu1010_fpga_lock(emu); + snd_iprintf(buffer, "EMU1010 Registers:\n\n"); for(i = 0; i < 0x40; i+=1) { @@ -496,6 +503,8 @@ static void snd_emu_proc_emu1010_reg_read(struct snd_info_entry *entry, snd_emu_proc_emu1010_link_read(emu, buffer, 0x701); } } + + snd_emu1010_fpga_unlock(emu); } static void snd_emu_proc_io_reg_read(struct snd_info_entry *entry, diff --git a/sound/pci/emu10k1/io.c b/sound/pci/emu10k1/io.c index 74df2330015f..f3260a81e47b 100644 --- a/sound/pci/emu10k1/io.c +++ b/sound/pci/emu10k1/io.c @@ -289,20 +289,28 @@ static void snd_emu1010_fpga_write_locked(struct snd_emu10k1 *emu, u32 reg, u32 void snd_emu1010_fpga_write(struct snd_emu10k1 *emu, u32 reg, u32 value) { - unsigned long flags; + if (snd_BUG_ON(!mutex_is_locked(&emu->emu1010.lock))) + return; + snd_emu1010_fpga_write_locked(emu, reg, value); +} - spin_lock_irqsave(&emu->emu_lock, flags); +void snd_emu1010_fpga_write_lock(struct snd_emu10k1 *emu, u32 reg, u32 value) +{ + snd_emu1010_fpga_lock(emu); snd_emu1010_fpga_write_locked(emu, reg, value); - spin_unlock_irqrestore(&emu->emu_lock, flags); + snd_emu1010_fpga_unlock(emu); } -static void snd_emu1010_fpga_read_locked(struct snd_emu10k1 *emu, u32 reg, u32 *value) +void snd_emu1010_fpga_read(struct snd_emu10k1 *emu, u32 reg, u32 *value) { // The higest input pin is used as the designated interrupt trigger, // so it needs to be masked out. // But note that any other input pin change will also cause an IRQ, // so using this function often causes an IRQ as a side effect. u32 mask = emu->card_capabilities->ca0108_chip ? 0x1f : 0x7f; + + if (snd_BUG_ON(!mutex_is_locked(&emu->emu1010.lock))) + return; if (snd_BUG_ON(reg > 0x3f)) return; reg += 0x40; /* 0x40 upwards are registers. */ @@ -313,47 +321,31 @@ static void snd_emu1010_fpga_read_locked(struct snd_emu10k1 *emu, u32 reg, u32 * *value = ((inw(emu->port + A_GPIO) >> 8) & mask); } -void snd_emu1010_fpga_read(struct snd_emu10k1 *emu, u32 reg, u32 *value) -{ - unsigned long flags; - - spin_lock_irqsave(&emu->emu_lock, flags); - snd_emu1010_fpga_read_locked(emu, reg, value); - spin_unlock_irqrestore(&emu->emu_lock, flags); -} - /* Each Destination has one and only one Source, * but one Source can feed any number of Destinations simultaneously. */ void snd_emu1010_fpga_link_dst_src_write(struct snd_emu10k1 *emu, u32 dst, u32 src) { - unsigned long flags; - if (snd_BUG_ON(dst & ~0x71f)) return; if (snd_BUG_ON(src & ~0x71f)) return; - spin_lock_irqsave(&emu->emu_lock, flags); - snd_emu1010_fpga_write_locked(emu, EMU_HANA_DESTHI, dst >> 8); - snd_emu1010_fpga_write_locked(emu, EMU_HANA_DESTLO, dst & 0x1f); - snd_emu1010_fpga_write_locked(emu, EMU_HANA_SRCHI, src >> 8); - snd_emu1010_fpga_write_locked(emu, EMU_HANA_SRCLO, src & 0x1f); - spin_unlock_irqrestore(&emu->emu_lock, flags); + snd_emu1010_fpga_write(emu, EMU_HANA_DESTHI, dst >> 8); + snd_emu1010_fpga_write(emu, EMU_HANA_DESTLO, dst & 0x1f); + snd_emu1010_fpga_write(emu, EMU_HANA_SRCHI, src >> 8); + snd_emu1010_fpga_write(emu, EMU_HANA_SRCLO, src & 0x1f); } u32 snd_emu1010_fpga_link_dst_src_read(struct snd_emu10k1 *emu, u32 dst) { - unsigned long flags; u32 hi, lo; if (snd_BUG_ON(dst & ~0x71f)) return 0; - spin_lock_irqsave(&emu->emu_lock, flags); - snd_emu1010_fpga_write_locked(emu, EMU_HANA_DESTHI, dst >> 8); - snd_emu1010_fpga_write_locked(emu, EMU_HANA_DESTLO, dst & 0x1f); - snd_emu1010_fpga_read_locked(emu, EMU_HANA_SRCHI, &hi); - snd_emu1010_fpga_read_locked(emu, EMU_HANA_SRCLO, &lo); - spin_unlock_irqrestore(&emu->emu_lock, flags); + snd_emu1010_fpga_write(emu, EMU_HANA_DESTHI, dst >> 8); + snd_emu1010_fpga_write(emu, EMU_HANA_DESTLO, dst & 0x1f); + snd_emu1010_fpga_read(emu, EMU_HANA_SRCHI, &hi); + snd_emu1010_fpga_read(emu, EMU_HANA_SRCLO, &lo); return (hi << 8) | lo; } -- cgit v1.2.3 From e8289fd3fa65d60cf04dab6f7845eda352c04ea6 Mon Sep 17 00:00:00 2001 From: Oswald Buddenhagen Date: Sun, 28 Apr 2024 11:37:15 +0200 Subject: ALSA: emu10k1: fix E-MU dock initialization A side effect of making the dock monitoring interrupt-driven was that we'd be very quick to program a freshly connected dock. However, for unclear reasons, the dock does not work when we do that - despite the FPGA netlist upload going just fine. We work around this by adding a delay before programming the dock; for safety, the value is several times as much as was determined empirically. Note that a badly timed dock hot-plug would have triggered the problem even before the referenced commit - but now it would happen 100% instead of about 3% of the time, thus making it impossible to work around by re-plugging. Fixes: fbb64eedf5a3 ("ALSA: emu10k1: make E-MU dock monitoring interrupt-driven") Link: https://bugzilla.kernel.org/show_bug.cgi?id=218584 Signed-off-by: Oswald Buddenhagen Signed-off-by: Takashi Iwai Message-ID: <20240428093716.3198666-6-oswald.buddenhagen@gmx.de> --- sound/pci/emu10k1/emu10k1_main.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/sound/pci/emu10k1/emu10k1_main.c b/sound/pci/emu10k1/emu10k1_main.c index 1a2905e8672b..8ccc0178360c 100644 --- a/sound/pci/emu10k1/emu10k1_main.c +++ b/sound/pci/emu10k1/emu10k1_main.c @@ -737,6 +737,12 @@ static void snd_emu1010_load_dock_firmware(struct snd_emu10k1 *emu) u32 tmp, tmp2; int err; + // The docking events clearly arrive prematurely - while the + // Dock's FPGA seems to be successfully programmed, the Dock + // fails to initialize subsequently if we don't give it some + // time to "warm up" here. + msleep(200); + dev_info(emu->card->dev, "emu1010: Loading Audio Dock Firmware\n"); /* Return to Audio Dock programming mode */ snd_emu1010_fpga_write(emu, EMU_HANA_FPGA_CONFIG, -- cgit v1.2.3 From 15c7e87aa88f0ab2d51c2e2123b127a6d693ca21 Mon Sep 17 00:00:00 2001 From: Oswald Buddenhagen Date: Sun, 28 Apr 2024 11:37:16 +0200 Subject: ALSA: emu10k1: make E-MU FPGA writes potentially more reliable We did not delay after the second strobe signal, so another immediately following access could potentially corrupt the written value. This is a purely speculative fix with no supporting evidence, but after taking out the spinlocks around the writes, it seems plausible that a modern processor could be actually too fast. Also, it's just cleaner to be consistent. Signed-off-by: Oswald Buddenhagen Signed-off-by: Takashi Iwai Message-ID: <20240428093716.3198666-7-oswald.buddenhagen@gmx.de> --- sound/pci/emu10k1/io.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/emu10k1/io.c b/sound/pci/emu10k1/io.c index f3260a81e47b..f4a1c2d4b078 100644 --- a/sound/pci/emu10k1/io.c +++ b/sound/pci/emu10k1/io.c @@ -285,6 +285,7 @@ static void snd_emu1010_fpga_write_locked(struct snd_emu10k1 *emu, u32 reg, u32 outw(value, emu->port + A_GPIO); udelay(10); outw(value | 0x80 , emu->port + A_GPIO); /* High bit clocks the value into the fpga. */ + udelay(10); } void snd_emu1010_fpga_write(struct snd_emu10k1 *emu, u32 reg, u32 value) -- cgit v1.2.3 From bc642d7bfdac3bfd838a1cd6651955ae2eb8535a Mon Sep 17 00:00:00 2001 From: Namjae Jeon Date: Wed, 24 Apr 2024 16:57:01 +0900 Subject: ksmbd: fix uninitialized symbol 'share' in smb2_tree_connect() Fix uninitialized symbol 'share' in smb2_tree_connect(). Fixes: e9d8c2f95ab8 ("ksmbd: add continuous availability share parameter") Reported-by: kernel test robot Reported-by: Dan Carpenter Signed-off-by: Namjae Jeon Signed-off-by: Steve French --- fs/smb/server/smb2pdu.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/smb/server/smb2pdu.c b/fs/smb/server/smb2pdu.c index 355824151c2d..30229161b346 100644 --- a/fs/smb/server/smb2pdu.c +++ b/fs/smb/server/smb2pdu.c @@ -1926,7 +1926,7 @@ int smb2_tree_connect(struct ksmbd_work *work) struct ksmbd_session *sess = work->sess; char *treename = NULL, *name = NULL; struct ksmbd_tree_conn_status status; - struct ksmbd_share_config *share; + struct ksmbd_share_config *share = NULL; int rc = -EINVAL; WORK_BUFFERS(work, req, rsp); @@ -1988,7 +1988,7 @@ int smb2_tree_connect(struct ksmbd_work *work) write_unlock(&sess->tree_conns_lock); rsp->StructureSize = cpu_to_le16(16); out_err1: - if (server_conf.flags & KSMBD_GLOBAL_FLAG_DURABLE_HANDLE && + if (server_conf.flags & KSMBD_GLOBAL_FLAG_DURABLE_HANDLE && share && test_share_config_flag(share, KSMBD_SHARE_FLAG_CONTINUOUS_AVAILABILITY)) rsp->Capabilities = SMB2_SHARE_CAP_CONTINUOUS_AVAILABILITY; -- cgit v1.2.3 From 1dd1eff161bd55968d3d46bc36def62d71fb4785 Mon Sep 17 00:00:00 2001 From: Zqiang Date: Sat, 27 Apr 2024 18:28:08 +0800 Subject: softirq: Fix suspicious RCU usage in __do_softirq() Currently, the condition "__this_cpu_read(ksoftirqd) == current" is used to invoke rcu_softirq_qs() in ksoftirqd tasks context for non-RT kernels. This works correctly as long as the context is actually task context but this condition is wrong when: - the current task is ksoftirqd - the task is interrupted in a RCU read side critical section - __do_softirq() is invoked on return from interrupt Syzkaller triggered the following scenario: -> finish_task_switch() -> put_task_struct_rcu_user() -> call_rcu(&task->rcu, delayed_put_task_struct) -> __kasan_record_aux_stack() -> pfn_valid() -> rcu_read_lock_sched() __irq_exit_rcu() -> __do_softirq)() -> if (!IS_ENABLED(CONFIG_PREEMPT_RT) && __this_cpu_read(ksoftirqd) == current) -> rcu_softirq_qs() -> RCU_LOCKDEP_WARN(lock_is_held(&rcu_sched_lock_map)) The rcu quiescent state is reported in the rcu-read critical section, so the lockdep warning is triggered. Fix this by splitting out the inner working of __do_softirq() into a helper function which takes an argument to distinguish between ksoftirqd task context and interrupted context and invoke it from the relevant call sites with the proper context information and use that for the conditional invocation of rcu_softirq_qs(). Reported-by: syzbot+dce04ed6d1438ad69656@syzkaller.appspotmail.com Suggested-by: Thomas Gleixner Signed-off-by: Zqiang Signed-off-by: Thomas Gleixner Link: https://lore.kernel.org/r/20240427102808.29356-1-qiang.zhang1211@gmail.com Link: https://lore.kernel.org/lkml/8f281a10-b85a-4586-9586-5bbc12dc784f@paulmck-laptop/T/#mea8aba4abfcb97bbf499d169ce7f30c4cff1b0e3 --- kernel/softirq.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) diff --git a/kernel/softirq.c b/kernel/softirq.c index b315b21fb28c..02582017759a 100644 --- a/kernel/softirq.c +++ b/kernel/softirq.c @@ -508,7 +508,7 @@ static inline bool lockdep_softirq_start(void) { return false; } static inline void lockdep_softirq_end(bool in_hardirq) { } #endif -asmlinkage __visible void __softirq_entry __do_softirq(void) +static void handle_softirqs(bool ksirqd) { unsigned long end = jiffies + MAX_SOFTIRQ_TIME; unsigned long old_flags = current->flags; @@ -563,8 +563,7 @@ restart: pending >>= softirq_bit; } - if (!IS_ENABLED(CONFIG_PREEMPT_RT) && - __this_cpu_read(ksoftirqd) == current) + if (!IS_ENABLED(CONFIG_PREEMPT_RT) && ksirqd) rcu_softirq_qs(); local_irq_disable(); @@ -584,6 +583,11 @@ restart: current_restore_flags(old_flags, PF_MEMALLOC); } +asmlinkage __visible void __softirq_entry __do_softirq(void) +{ + handle_softirqs(false); +} + /** * irq_enter_rcu - Enter an interrupt context with RCU watching */ @@ -921,7 +925,7 @@ static void run_ksoftirqd(unsigned int cpu) * We can safely run softirq on inline stack, as we are not deep * in the task stack here. */ - __do_softirq(); + handle_softirqs(true); ksoftirqd_run_end(); cond_resched(); return; -- cgit v1.2.3 From b7cf2a1d9881823133acc48427815a48b35b49f4 Mon Sep 17 00:00:00 2001 From: Barry Song Date: Tue, 19 Mar 2024 14:09:20 +1300 Subject: xtensa: remove redundant flush_dcache_page and ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE macros xtensa's flush_dcache_page() can be a no-op sometimes. There is a generic implementation for this case in include/asm-generic/ cacheflush.h. #ifndef ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE static inline void flush_dcache_page(struct page *page) { } #define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 0 #endif So remove the superfluous flush_dcache_page() definition, which also helps silence potential build warnings complaining the page variable passed to flush_dcache_page() is not used. In file included from crypto/scompress.c:12: include/crypto/scatterwalk.h: In function 'scatterwalk_pagedone': include/crypto/scatterwalk.h:76:30: warning: variable 'page' set but not used [-Wunused-but-set-variable] 76 | struct page *page; | ^~~~ crypto/scompress.c: In function 'scomp_acomp_comp_decomp': >> crypto/scompress.c:174:38: warning: unused variable 'dst_page' [-Wunused-variable] 174 | struct page *dst_page = sg_page(req->dst); | The issue was originally reported on LoongArch by kernel test robot (Huacai fixed it on LoongArch), then reported by Guenter and me on xtensa. This patch also removes lots of redundant macros which have been defined by asm-generic/cacheflush.h. Cc: Huacai Chen Cc: Herbert Xu Reported-by: kernel test robot Closes: https://lore.kernel.org/oe-kbuild-all/202403091614.NeUw5zcv-lkp@intel.com/ Reported-by: Barry Song Closes: https://lore.kernel.org/all/CAGsJ_4yDk1+axbte7FKQEwD7X2oxUCFrEc9M5YOS1BobfDFXPA@mail.gmail.com/ Reported-by: Guenter Roeck Closes: https://lore.kernel.org/all/aaa8b7d7-5abe-47bf-93f6-407942436472@roeck-us.net/ Fixes: 77292bb8ca69 ("crypto: scomp - remove memcpy if sg_nents is 1 and pages are lowmem") Signed-off-by: Barry Song Message-Id: <20240319010920.125192-1-21cnbao@gmail.com> Signed-off-by: Max Filippov --- arch/xtensa/include/asm/cacheflush.h | 24 ++++++++---------------- 1 file changed, 8 insertions(+), 16 deletions(-) diff --git a/arch/xtensa/include/asm/cacheflush.h b/arch/xtensa/include/asm/cacheflush.h index 38bcecb0e457..a2b6bb5429f5 100644 --- a/arch/xtensa/include/asm/cacheflush.h +++ b/arch/xtensa/include/asm/cacheflush.h @@ -100,6 +100,10 @@ void flush_cache_range(struct vm_area_struct*, ulong, ulong); void flush_icache_range(unsigned long start, unsigned long end); void flush_cache_page(struct vm_area_struct*, unsigned long, unsigned long); +#define flush_cache_all flush_cache_all +#define flush_cache_range flush_cache_range +#define flush_icache_range flush_icache_range +#define flush_cache_page flush_cache_page #else #define flush_cache_all local_flush_cache_all #define flush_cache_range local_flush_cache_range @@ -136,20 +140,7 @@ void local_flush_cache_page(struct vm_area_struct *vma, #else -#define flush_cache_all() do { } while (0) -#define flush_cache_mm(mm) do { } while (0) -#define flush_cache_dup_mm(mm) do { } while (0) - -#define flush_cache_vmap(start,end) do { } while (0) -#define flush_cache_vmap_early(start,end) do { } while (0) -#define flush_cache_vunmap(start,end) do { } while (0) - -#define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 0 -#define flush_dcache_page(page) do { } while (0) - #define flush_icache_range local_flush_icache_range -#define flush_cache_page(vma, addr, pfn) do { } while (0) -#define flush_cache_range(vma, start, end) do { } while (0) #endif @@ -162,15 +153,14 @@ void local_flush_cache_page(struct vm_area_struct *vma, __invalidate_icache_range(start,(end) - (start)); \ } while (0) -#define flush_dcache_mmap_lock(mapping) do { } while (0) -#define flush_dcache_mmap_unlock(mapping) do { } while (0) - #if defined(CONFIG_MMU) && (DCACHE_WAY_SIZE > PAGE_SIZE) extern void copy_to_user_page(struct vm_area_struct*, struct page*, unsigned long, void*, const void*, unsigned long); extern void copy_from_user_page(struct vm_area_struct*, struct page*, unsigned long, void*, const void*, unsigned long); +#define copy_to_user_page copy_to_user_page +#define copy_from_user_page copy_from_user_page #else @@ -186,4 +176,6 @@ extern void copy_from_user_page(struct vm_area_struct*, struct page*, #endif +#include + #endif /* _XTENSA_CACHEFLUSH_H */ -- cgit v1.2.3 From b6d2e438e16c7d4dbde08cfb2b95b0f3f325ba40 Mon Sep 17 00:00:00 2001 From: Antony Antony Date: Fri, 26 Apr 2024 12:15:13 +0200 Subject: xfrm: Correct spelling mistake in xfrm.h comment A spelling error was found in the comment section of include/uapi/linux/xfrm.h. Since this header file is copied to many userspace programs and undergoes Debian spellcheck, it's preferable to fix it in upstream rather than downstream having exceptions. This commit fixes the spelling mistake. Fixes: df71837d5024 ("[LSM-IPSec]: Security association restriction.") Signed-off-by: Antony Antony Reviewed-by: Jiri Pirko Signed-off-by: Steffen Klassert --- include/uapi/linux/xfrm.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/uapi/linux/xfrm.h b/include/uapi/linux/xfrm.h index 6a77328be114..594b66e16395 100644 --- a/include/uapi/linux/xfrm.h +++ b/include/uapi/linux/xfrm.h @@ -228,7 +228,7 @@ enum { #define XFRM_NR_MSGTYPES (XFRM_MSG_MAX + 1 - XFRM_MSG_BASE) /* - * Generic LSM security context for comunicating to user space + * Generic LSM security context for communicating to user space * NOTE: Same format as sadb_x_sec_ctx */ struct xfrm_user_sec_ctx { -- cgit v1.2.3 From d6d85ac15cce4dcf02cf8c96cb970562be6a3529 Mon Sep 17 00:00:00 2001 From: Ashish Kalra Date: Fri, 26 Apr 2024 00:41:56 +0000 Subject: x86/e820: Add a new e820 table update helper Add a new API helper e820__range_update_table() with which to update an arbitrary e820 table. Move all current users of e820__range_update_kexec() to this new helper. [ bp: Massage. ] Signed-off-by: Ashish Kalra Signed-off-by: Borislav Petkov (AMD) Link: https://lore.kernel.org/r/b726af213ad55053f8a7a1e793b01bb3f1ca9dd5.1714090302.git.ashish.kalra@amd.com --- arch/x86/include/asm/e820/api.h | 1 + arch/x86/kernel/e820.c | 7 ++++--- 2 files changed, 5 insertions(+), 3 deletions(-) diff --git a/arch/x86/include/asm/e820/api.h b/arch/x86/include/asm/e820/api.h index e8f58ddd06d9..2e74a7f0e935 100644 --- a/arch/x86/include/asm/e820/api.h +++ b/arch/x86/include/asm/e820/api.h @@ -17,6 +17,7 @@ extern bool e820__mapped_all(u64 start, u64 end, enum e820_type type); extern void e820__range_add (u64 start, u64 size, enum e820_type type); extern u64 e820__range_update(u64 start, u64 size, enum e820_type old_type, enum e820_type new_type); extern u64 e820__range_remove(u64 start, u64 size, enum e820_type old_type, bool check_type); +extern u64 e820__range_update_table(struct e820_table *t, u64 start, u64 size, enum e820_type old_type, enum e820_type new_type); extern void e820__print_table(char *who); extern int e820__update_table(struct e820_table *table); diff --git a/arch/x86/kernel/e820.c b/arch/x86/kernel/e820.c index 6f1b379e3b38..68b09f718f10 100644 --- a/arch/x86/kernel/e820.c +++ b/arch/x86/kernel/e820.c @@ -532,9 +532,10 @@ u64 __init e820__range_update(u64 start, u64 size, enum e820_type old_type, enum return __e820__range_update(e820_table, start, size, old_type, new_type); } -static u64 __init e820__range_update_kexec(u64 start, u64 size, enum e820_type old_type, enum e820_type new_type) +u64 __init e820__range_update_table(struct e820_table *t, u64 start, u64 size, + enum e820_type old_type, enum e820_type new_type) { - return __e820__range_update(e820_table_kexec, start, size, old_type, new_type); + return __e820__range_update(t, start, size, old_type, new_type); } /* Remove a range of memory from the E820 table: */ @@ -806,7 +807,7 @@ u64 __init e820__memblock_alloc_reserved(u64 size, u64 align) addr = memblock_phys_alloc(size, align); if (addr) { - e820__range_update_kexec(addr, size, E820_TYPE_RAM, E820_TYPE_RESERVED); + e820__range_update_table(e820_table_kexec, addr, size, E820_TYPE_RAM, E820_TYPE_RESERVED); pr_info("update e820_table_kexec for e820__memblock_alloc_reserved()\n"); e820__update_table_kexec(); } -- cgit v1.2.3 From ee59be35d7a8be7fcaa2d61fb89734ab5c25e4ee Mon Sep 17 00:00:00 2001 From: Thomas Weißschuh Date: Thu, 11 Apr 2024 23:33:51 +0200 Subject: misc/pvpanic-pci: register attributes via pci_driver MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit In __pci_register_driver(), the pci core overwrites the dev_groups field of the embedded struct device_driver with the dev_groups from the outer struct pci_driver unconditionally. Set dev_groups in the pci_driver to make sure it is used. This was broken since the introduction of pvpanic-pci. Fixes: db3a4f0abefd ("misc/pvpanic: add PCI driver") Cc: stable@vger.kernel.org Signed-off-by: Thomas Weißschuh Fixes: ded13b9cfd59 ("PCI: Add support for dev_groups to struct pci_driver") Link: https://lore.kernel.org/r/20240411-pvpanic-pci-dev-groups-v1-1-db8cb69f1b09@weissschuh.net Signed-off-by: Greg Kroah-Hartman --- drivers/misc/pvpanic/pvpanic-pci.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/drivers/misc/pvpanic/pvpanic-pci.c b/drivers/misc/pvpanic/pvpanic-pci.c index 9ad20e82785b..b21598a18f6d 100644 --- a/drivers/misc/pvpanic/pvpanic-pci.c +++ b/drivers/misc/pvpanic/pvpanic-pci.c @@ -44,8 +44,6 @@ static struct pci_driver pvpanic_pci_driver = { .name = "pvpanic-pci", .id_table = pvpanic_pci_id_tbl, .probe = pvpanic_pci_probe, - .driver = { - .dev_groups = pvpanic_dev_groups, - }, + .dev_groups = pvpanic_dev_groups, }; module_pci_driver(pvpanic_pci_driver); -- cgit v1.2.3 From 400fea4b9651adf5d7ebd5d71e905f34f4e4e493 Mon Sep 17 00:00:00 2001 From: Ashish Kalra Date: Fri, 26 Apr 2024 00:43:18 +0000 Subject: x86/sev: Add callback to apply RMP table fixups for kexec Handle cases where the RMP table placement in the BIOS is not 2M aligned and the kexec-ed kernel could try to allocate from within that chunk which then causes a fatal RMP fault. The kexec failure is illustrated below: SEV-SNP: RMP table physical range [0x0000007ffe800000 - 0x000000807f0fffff] BIOS-provided physical RAM map: BIOS-e820: [mem 0x0000000000000000-0x000000000008efff] usable BIOS-e820: [mem 0x000000000008f000-0x000000000008ffff] ACPI NVS ... BIOS-e820: [mem 0x0000004080000000-0x0000007ffe7fffff] usable BIOS-e820: [mem 0x0000007ffe800000-0x000000807f0fffff] reserved BIOS-e820: [mem 0x000000807f100000-0x000000807f1fefff] usable As seen here in the e820 memory map, the end range of the RMP table is not aligned to 2MB and not reserved but it is usable as RAM. Subsequently, kexec -s (KEXEC_FILE_LOAD syscall) loads it's purgatory code and boot_param, command line and other setup data into this RAM region as seen in the kexec logs below, which leads to fatal RMP fault during kexec boot. Loaded purgatory at 0x807f1fa000 Loaded boot_param, command line and misc at 0x807f1f8000 bufsz=0x1350 memsz=0x2000 Loaded 64bit kernel at 0x7ffae00000 bufsz=0xd06200 memsz=0x3894000 Loaded initrd at 0x7ff6c89000 bufsz=0x4176014 memsz=0x4176014 E820 memmap: 0000000000000000-000000000008efff (1) 000000000008f000-000000000008ffff (4) 0000000000090000-000000000009ffff (1) ... 0000004080000000-0000007ffe7fffff (1) 0000007ffe800000-000000807f0fffff (2) 000000807f100000-000000807f1fefff (1) 000000807f1ff000-000000807fffffff (2) nr_segments = 4 segment[0]: buf=0x00000000e626d1a2 bufsz=0x4000 mem=0x807f1fa000 memsz=0x5000 segment[1]: buf=0x0000000029c67bd6 bufsz=0x1350 mem=0x807f1f8000 memsz=0x2000 segment[2]: buf=0x0000000045c60183 bufsz=0xd06200 mem=0x7ffae00000 memsz=0x3894000 segment[3]: buf=0x000000006e54f08d bufsz=0x4176014 mem=0x7ff6c89000 memsz=0x4177000 kexec_file_load: type:0, start:0x807f1fa150 head:0x1184d0002 flags:0x0 Check if RMP table start and end physical range in the e820 tables are not aligned to 2MB and in that case map this range to reserved in all the three e820 tables. [ bp: Massage. ] Fixes: c3b86e61b756 ("x86/cpufeatures: Enable/unmask SEV-SNP CPU feature") Signed-off-by: Ashish Kalra Signed-off-by: Borislav Petkov (AMD) Link: https://lore.kernel.org/r/df6e995ff88565262c2c7c69964883ff8aa6fc30.1714090302.git.ashish.kalra@amd.com --- arch/x86/include/asm/sev.h | 2 ++ arch/x86/mm/mem_encrypt.c | 7 +++++++ arch/x86/virt/svm/sev.c | 36 ++++++++++++++++++++++++++++++++++++ 3 files changed, 45 insertions(+) diff --git a/arch/x86/include/asm/sev.h b/arch/x86/include/asm/sev.h index 7f57382afee4..93ed60080cfe 100644 --- a/arch/x86/include/asm/sev.h +++ b/arch/x86/include/asm/sev.h @@ -269,6 +269,7 @@ int rmp_make_private(u64 pfn, u64 gpa, enum pg_level level, u32 asid, bool immut int rmp_make_shared(u64 pfn, enum pg_level level); void snp_leak_pages(u64 pfn, unsigned int npages); void kdump_sev_callback(void); +void snp_fixup_e820_tables(void); #else static inline bool snp_probe_rmptable_info(void) { return false; } static inline int snp_lookup_rmpentry(u64 pfn, bool *assigned, int *level) { return -ENODEV; } @@ -282,6 +283,7 @@ static inline int rmp_make_private(u64 pfn, u64 gpa, enum pg_level level, u32 as static inline int rmp_make_shared(u64 pfn, enum pg_level level) { return -ENODEV; } static inline void snp_leak_pages(u64 pfn, unsigned int npages) {} static inline void kdump_sev_callback(void) { } +static inline void snp_fixup_e820_tables(void) {} #endif #endif diff --git a/arch/x86/mm/mem_encrypt.c b/arch/x86/mm/mem_encrypt.c index 6f3b3e028718..0a120d85d7bb 100644 --- a/arch/x86/mm/mem_encrypt.c +++ b/arch/x86/mm/mem_encrypt.c @@ -102,6 +102,13 @@ void __init mem_encrypt_setup_arch(void) phys_addr_t total_mem = memblock_phys_mem_size(); unsigned long size; + /* + * Do RMP table fixups after the e820 tables have been setup by + * e820__memory_setup(). + */ + if (cc_platform_has(CC_ATTR_HOST_SEV_SNP)) + snp_fixup_e820_tables(); + if (!cc_platform_has(CC_ATTR_GUEST_MEM_ENCRYPT)) return; diff --git a/arch/x86/virt/svm/sev.c b/arch/x86/virt/svm/sev.c index ab0e8448bb6e..0ae10535c699 100644 --- a/arch/x86/virt/svm/sev.c +++ b/arch/x86/virt/svm/sev.c @@ -163,6 +163,42 @@ bool snp_probe_rmptable_info(void) return true; } +static void __init __snp_fixup_e820_tables(u64 pa) +{ + if (IS_ALIGNED(pa, PMD_SIZE)) + return; + + /* + * Handle cases where the RMP table placement by the BIOS is not + * 2M aligned and the kexec kernel could try to allocate + * from within that chunk which then causes a fatal RMP fault. + * + * The e820_table needs to be updated as it is converted to + * kernel memory resources and used by KEXEC_FILE_LOAD syscall + * to load kexec segments. + * + * The e820_table_firmware needs to be updated as it is exposed + * to sysfs and used by the KEXEC_LOAD syscall to load kexec + * segments. + * + * The e820_table_kexec needs to be updated as it passed to + * the kexec-ed kernel. + */ + pa = ALIGN_DOWN(pa, PMD_SIZE); + if (e820__mapped_any(pa, pa + PMD_SIZE, E820_TYPE_RAM)) { + pr_info("Reserving start/end of RMP table on a 2MB boundary [0x%016llx]\n", pa); + e820__range_update(pa, PMD_SIZE, E820_TYPE_RAM, E820_TYPE_RESERVED); + e820__range_update_table(e820_table_kexec, pa, PMD_SIZE, E820_TYPE_RAM, E820_TYPE_RESERVED); + e820__range_update_table(e820_table_firmware, pa, PMD_SIZE, E820_TYPE_RAM, E820_TYPE_RESERVED); + } +} + +void __init snp_fixup_e820_tables(void) +{ + __snp_fixup_e820_tables(probed_rmp_base); + __snp_fixup_e820_tables(probed_rmp_base + probed_rmp_size); +} + /* * Do the necessary preparations which are verified by the firmware as * described in the SNP_INIT_EX firmware command description in the SNP -- cgit v1.2.3 From 38762a0763c10c24a4915feee722d7aa6e73eb98 Mon Sep 17 00:00:00 2001 From: Thanassis Avgerinos Date: Wed, 17 Apr 2024 11:30:02 -0400 Subject: firewire: nosy: ensure user_length is taken into account when fetching packet contents Ensure that packet_buffer_get respects the user_length provided. If the length of the head packet exceeds the user_length, packet_buffer_get will now return 0 to signify to the user that no data were read and a larger buffer size is required. Helps prevent user space overflows. Signed-off-by: Thanassis Avgerinos Signed-off-by: Takashi Sakamoto --- drivers/firewire/nosy.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/firewire/nosy.c b/drivers/firewire/nosy.c index b0d671db178a..ea31ac7ac1ca 100644 --- a/drivers/firewire/nosy.c +++ b/drivers/firewire/nosy.c @@ -148,10 +148,12 @@ packet_buffer_get(struct client *client, char __user *data, size_t user_length) if (atomic_read(&buffer->size) == 0) return -ENODEV; - /* FIXME: Check length <= user_length. */ + length = buffer->head->length; + + if (length > user_length) + return 0; end = buffer->data + buffer->capacity; - length = buffer->head->length; if (&buffer->head->data[length] < end) { if (copy_to_user(data, buffer->head->data, length)) -- cgit v1.2.3 From 09773bf55aeabe3fd61745d900798dc1272c778a Mon Sep 17 00:00:00 2001 From: Takashi Sakamoto Date: Mon, 29 Apr 2024 17:47:08 +0900 Subject: firewire: ohci: fulfill timestamp for some local asynchronous transaction 1394 OHCI driver generates packet data for the response subaction to the request subaction to some local registers. In the case, the driver should assign timestamp to them by itself. This commit fulfills the timestamp for the subaction. Cc: stable@vger.kernel.org Fixes: dcadfd7f7c74 ("firewire: core: use union for callback of transaction completion") Link: https://lore.kernel.org/r/20240429084709.707473-1-o-takashi@sakamocchi.jp Signed-off-by: Takashi Sakamoto --- drivers/firewire/ohci.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/drivers/firewire/ohci.c b/drivers/firewire/ohci.c index 38d19410a2be..b9ae0340b8a7 100644 --- a/drivers/firewire/ohci.c +++ b/drivers/firewire/ohci.c @@ -1556,6 +1556,8 @@ static int handle_at_packet(struct context *context, #define HEADER_GET_DATA_LENGTH(q) (((q) >> 16) & 0xffff) #define HEADER_GET_EXTENDED_TCODE(q) (((q) >> 0) & 0xffff) +static u32 get_cycle_time(struct fw_ohci *ohci); + static void handle_local_rom(struct fw_ohci *ohci, struct fw_packet *packet, u32 csr) { @@ -1580,6 +1582,8 @@ static void handle_local_rom(struct fw_ohci *ohci, (void *) ohci->config_rom + i, length); } + // Timestamping on behalf of the hardware. + response.timestamp = cycle_time_to_ohci_tstamp(get_cycle_time(ohci)); fw_core_handle_response(&ohci->card, &response); } @@ -1628,6 +1632,8 @@ static void handle_local_lock(struct fw_ohci *ohci, fw_fill_response(&response, packet->header, RCODE_BUSY, NULL, 0); out: + // Timestamping on behalf of the hardware. + response.timestamp = cycle_time_to_ohci_tstamp(get_cycle_time(ohci)); fw_core_handle_response(&ohci->card, &response); } @@ -1670,8 +1676,6 @@ static void handle_local_request(struct context *ctx, struct fw_packet *packet) } } -static u32 get_cycle_time(struct fw_ohci *ohci); - static void at_context_transmit(struct context *ctx, struct fw_packet *packet) { unsigned long flags; -- cgit v1.2.3 From e4236b14fe32a8d92686ec656c870a6bb1d6f50a Mon Sep 17 00:00:00 2001 From: Matt Coster Date: Tue, 5 Mar 2024 10:28:33 +0000 Subject: drm/imagination: Ensure PVR_MIPS_PT_PAGE_COUNT is never zero When the host page size was more than 4 times larger than the FW page size, this macro evaluated to zero resulting in zero-sized arrays. Use DIV_ROUND_UP() to ensure the correct behavior. Reported-by: 20240228012313.5934-1-yaolu@kylinos.cn Closes: https://lore.kernel.org/dri-devel/20240228012313.5934-1-yaolu@kylinos.cn Link: https://lore.kernel.org/dri-devel/20240228012313.5934-1-yaolu@kylinos.cn Fixes: 927f3e0253c1 ("drm/imagination: Implement MIPS firmware processor and MMU support") Cc: stable@vger.kernel.org Signed-off-by: Matt Coster Reviewed-by: Frank Binns --- drivers/gpu/drm/imagination/pvr_fw_mips.h | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/imagination/pvr_fw_mips.h b/drivers/gpu/drm/imagination/pvr_fw_mips.h index 408dbe63a90c..a0c5c41c8aa2 100644 --- a/drivers/gpu/drm/imagination/pvr_fw_mips.h +++ b/drivers/gpu/drm/imagination/pvr_fw_mips.h @@ -7,13 +7,14 @@ #include "pvr_rogue_mips.h" #include +#include #include /* Forward declaration from pvr_gem.h. */ struct pvr_gem_object; -#define PVR_MIPS_PT_PAGE_COUNT ((ROGUE_MIPSFW_MAX_NUM_PAGETABLE_PAGES * ROGUE_MIPSFW_PAGE_SIZE_4K) \ - >> PAGE_SHIFT) +#define PVR_MIPS_PT_PAGE_COUNT DIV_ROUND_UP(ROGUE_MIPSFW_MAX_NUM_PAGETABLE_PAGES * ROGUE_MIPSFW_PAGE_SIZE_4K, PAGE_SIZE) + /** * struct pvr_fw_mips_data - MIPS-specific data */ -- cgit v1.2.3 From 2d5af3ab9e6f1cf1468b2a5221b5c1f7f46c3333 Mon Sep 17 00:00:00 2001 From: Aman Dhoot Date: Mon, 22 Apr 2024 18:08:23 +0530 Subject: ALSA: hda/realtek: Fix mute led of HP Laptop 15-da3001TU This patch simply add SND_PCI_QUIRK for HP Laptop 15-da3001TU to fixed mute led of laptop. Signed-off-by: Aman Dhoot Cc: Link: https://lore.kernel.org/r/CAMTp=B+3NG65Z684xMwHqdXDJhY+DJK-kuSw4adn6xwnG+b5JA@mail.gmail.com Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 70d80b6af3fe..e77013309795 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -9937,6 +9937,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x103c, 0x860f, "HP ZBook 15 G6", ALC285_FIXUP_HP_GPIO_AMP_INIT), SND_PCI_QUIRK(0x103c, 0x861f, "HP Elite Dragonfly G1", ALC285_FIXUP_HP_GPIO_AMP_INIT), SND_PCI_QUIRK(0x103c, 0x869d, "HP", ALC236_FIXUP_HP_MUTE_LED), + SND_PCI_QUIRK(0x103c, 0x86c1, "HP Laptop 15-da3001TU", ALC236_FIXUP_HP_MUTE_LED_COEFBIT2), SND_PCI_QUIRK(0x103c, 0x86c7, "HP Envy AiO 32", ALC274_FIXUP_HP_ENVY_GPIO), SND_PCI_QUIRK(0x103c, 0x86e7, "HP Spectre x360 15-eb0xxx", ALC285_FIXUP_HP_SPECTRE_X360_EB1), SND_PCI_QUIRK(0x103c, 0x86e8, "HP Spectre x360 15-eb0xxx", ALC285_FIXUP_HP_SPECTRE_X360_EB1), -- cgit v1.2.3 From c4238686f9093b98bd6245a348bcf059cdce23af Mon Sep 17 00:00:00 2001 From: "Boy.Wu" Date: Mon, 15 Apr 2024 05:21:55 +0100 Subject: ARM: 9381/1: kasan: clear stale stack poison We found below OOB crash: [ 33.452494] ================================================================== [ 33.453513] BUG: KASAN: stack-out-of-bounds in refresh_cpu_vm_stats.constprop.0+0xcc/0x2ec [ 33.454660] Write of size 164 at addr c1d03d30 by task swapper/0/0 [ 33.455515] [ 33.455767] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G O 6.1.25-mainline #1 [ 33.456880] Hardware name: Generic DT based system [ 33.457555] unwind_backtrace from show_stack+0x18/0x1c [ 33.458326] show_stack from dump_stack_lvl+0x40/0x4c [ 33.459072] dump_stack_lvl from print_report+0x158/0x4a4 [ 33.459863] print_report from kasan_report+0x9c/0x148 [ 33.460616] kasan_report from kasan_check_range+0x94/0x1a0 [ 33.461424] kasan_check_range from memset+0x20/0x3c [ 33.462157] memset from refresh_cpu_vm_stats.constprop.0+0xcc/0x2ec [ 33.463064] refresh_cpu_vm_stats.constprop.0 from tick_nohz_idle_stop_tick+0x180/0x53c [ 33.464181] tick_nohz_idle_stop_tick from do_idle+0x264/0x354 [ 33.465029] do_idle from cpu_startup_entry+0x20/0x24 [ 33.465769] cpu_startup_entry from rest_init+0xf0/0xf4 [ 33.466528] rest_init from arch_post_acpi_subsys_init+0x0/0x18 [ 33.467397] [ 33.467644] The buggy address belongs to stack of task swapper/0/0 [ 33.468493] and is located at offset 112 in frame: [ 33.469172] refresh_cpu_vm_stats.constprop.0+0x0/0x2ec [ 33.469917] [ 33.470165] This frame has 2 objects: [ 33.470696] [32, 76) 'global_zone_diff' [ 33.470729] [112, 276) 'global_node_diff' [ 33.471294] [ 33.472095] The buggy address belongs to the physical page: [ 33.472862] page:3cd72da8 refcount:1 mapcount:0 mapping:00000000 index:0x0 pfn:0x41d03 [ 33.473944] flags: 0x1000(reserved|zone=0) [ 33.474565] raw: 00001000 ed741470 ed741470 00000000 00000000 00000000 ffffffff 00000001 [ 33.475656] raw: 00000000 [ 33.476050] page dumped because: kasan: bad access detected [ 33.476816] [ 33.477061] Memory state around the buggy address: [ 33.477732] c1d03c00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 33.478630] c1d03c80: 00 00 00 00 00 00 00 00 f1 f1 f1 f1 00 00 00 00 [ 33.479526] >c1d03d00: 00 04 f2 f2 f2 f2 00 00 00 00 00 00 f1 f1 f1 f1 [ 33.480415] ^ [ 33.481195] c1d03d80: 00 00 00 00 00 00 00 00 00 00 04 f3 f3 f3 f3 f3 [ 33.482088] c1d03e00: f3 f3 f3 f3 00 00 00 00 00 00 00 00 00 00 00 00 [ 33.482978] ================================================================== We find the root cause of this OOB is that arm does not clear stale stack poison in the case of cpuidle. This patch refer to arch/arm64/kernel/sleep.S to resolve this issue. From cited commit [1] that explain the problem Functions which the compiler has instrumented for KASAN place poison on the stack shadow upon entry and remove this poison prior to returning. In the case of cpuidle, CPUs exit the kernel a number of levels deep in C code. Any instrumented functions on this critical path will leave portions of the stack shadow poisoned. If CPUs lose context and return to the kernel via a cold path, we restore a prior context saved in __cpu_suspend_enter are forgotten, and we never remove the poison they placed in the stack shadow area by functions calls between this and the actual exit of the kernel. Thus, (depending on stackframe layout) subsequent calls to instrumented functions may hit this stale poison, resulting in (spurious) KASAN splats to the console. To avoid this, clear any stale poison from the idle thread for a CPU prior to bringing a CPU online. From cited commit [2] Extend to check for CONFIG_KASAN_STACK [1] commit 0d97e6d8024c ("arm64: kasan: clear stale stack poison") [2] commit d56a9ef84bd0 ("kasan, arm64: unpoison stack only with CONFIG_KASAN_STACK") Signed-off-by: Boy Wu Reviewed-by: Mark Rutland Acked-by: Andrey Ryabinin Reviewed-by: Linus Walleij Fixes: 5615f69bc209 ("ARM: 9016/2: Initialize the mapping of KASan shadow memory") Signed-off-by: Russell King (Oracle) --- arch/arm/kernel/sleep.S | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/arm/kernel/sleep.S b/arch/arm/kernel/sleep.S index a86a1d4f3461..93afd1005b43 100644 --- a/arch/arm/kernel/sleep.S +++ b/arch/arm/kernel/sleep.S @@ -127,6 +127,10 @@ cpu_resume_after_mmu: instr_sync #endif bl cpu_init @ restore the und/abt/irq banked regs +#if defined(CONFIG_KASAN) && defined(CONFIG_KASAN_STACK) + mov r0, sp + bl kasan_unpoison_task_stack_below +#endif mov r0, #0 @ return zero on success ldmfd sp!, {r4 - r11, pc} ENDPROC(cpu_resume_after_mmu) -- cgit v1.2.3 From dce3696271af7765f04428ec31b1b87dc7d016c6 Mon Sep 17 00:00:00 2001 From: LuMingYin Date: Sat, 27 Apr 2024 08:23:47 +0100 Subject: tracing/probes: Fix memory leak in traceprobe_parse_probe_arg_body() If traceprobe_parse_probe_arg_body() failed to allocate 'parg->fmt', it jumps to the label 'out' instead of 'fail' by mistake.In the result, the buffer 'tmp' is not freed in this case and leaks its memory. Thus jump to the label 'fail' in that error case. Link: https://lore.kernel.org/all/20240427072347.1421053-1-lumingyindetect@126.com/ Fixes: 032330abd08b ("tracing/probes: Cleanup probe argument parser") Signed-off-by: LuMingYin Acked-by: Masami Hiramatsu (Google) Signed-off-by: Masami Hiramatsu (Google) --- kernel/trace/trace_probe.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/trace/trace_probe.c b/kernel/trace/trace_probe.c index dfe3ee6035ec..42bc0f362226 100644 --- a/kernel/trace/trace_probe.c +++ b/kernel/trace/trace_probe.c @@ -1466,7 +1466,7 @@ static int traceprobe_parse_probe_arg_body(const char *argv, ssize_t *size, parg->fmt = kmalloc(len, GFP_KERNEL); if (!parg->fmt) { ret = -ENOMEM; - goto out; + goto fail; } snprintf(parg->fmt, len, "%s[%d]", parg->type->fmttype, parg->count); -- cgit v1.2.3 From b11d26660dff8d7430892008616452dc8e5fb0f3 Mon Sep 17 00:00:00 2001 From: Jerome Brunet Date: Fri, 26 Apr 2024 17:29:38 +0200 Subject: ASoC: meson: axg-fifo: use threaded irq to check periods With the AXG audio subsystem, there is a possible random channel shift on TDM capture, when the slot number per lane is more than 2, and there is more than one lane used. The problem has been there since the introduction of the axg audio support but such scenario is pretty uncommon. This is why there is no loud complains about the problem. Solving the problem require to make the links non-atomic and use the trigger() callback to start FEs and BEs in the appropriate order. This was tried in the past and reverted because it caused the block irq to sleep while atomic. However, instead of reverting, the solution is to call snd_pcm_period_elapsed() in a non atomic context. Use the bottom half of a threaded IRQ to do so. Fixes: 6dc4fa179fb8 ("ASoC: meson: add axg fifo base driver") Signed-off-by: Jerome Brunet Link: https://lore.kernel.org/r/20240426152946.3078805-2-jbrunet@baylibre.com Signed-off-by: Mark Brown --- sound/soc/meson/axg-fifo.c | 29 +++++++++++++++++++---------- 1 file changed, 19 insertions(+), 10 deletions(-) diff --git a/sound/soc/meson/axg-fifo.c b/sound/soc/meson/axg-fifo.c index bebee0ca8e38..ecb3eb7a9723 100644 --- a/sound/soc/meson/axg-fifo.c +++ b/sound/soc/meson/axg-fifo.c @@ -204,18 +204,26 @@ static irqreturn_t axg_fifo_pcm_irq_block(int irq, void *dev_id) unsigned int status; regmap_read(fifo->map, FIFO_STATUS1, &status); - status = FIELD_GET(STATUS1_INT_STS, status); + axg_fifo_ack_irq(fifo, status); + + /* Use the thread to call period elapsed on nonatomic links */ if (status & FIFO_INT_COUNT_REPEAT) - snd_pcm_period_elapsed(ss); - else - dev_dbg(axg_fifo_dev(ss), "unexpected irq - STS 0x%02x\n", - status); + return IRQ_WAKE_THREAD; - /* Ack irqs */ - axg_fifo_ack_irq(fifo, status); + dev_dbg(axg_fifo_dev(ss), "unexpected irq - STS 0x%02x\n", + status); + + return IRQ_NONE; +} + +static irqreturn_t axg_fifo_pcm_irq_block_thread(int irq, void *dev_id) +{ + struct snd_pcm_substream *ss = dev_id; + + snd_pcm_period_elapsed(ss); - return IRQ_RETVAL(status); + return IRQ_HANDLED; } int axg_fifo_pcm_open(struct snd_soc_component *component, @@ -243,8 +251,9 @@ int axg_fifo_pcm_open(struct snd_soc_component *component, if (ret) return ret; - ret = request_irq(fifo->irq, axg_fifo_pcm_irq_block, 0, - dev_name(dev), ss); + ret = request_threaded_irq(fifo->irq, axg_fifo_pcm_irq_block, + axg_fifo_pcm_irq_block_thread, + IRQF_ONESHOT, dev_name(dev), ss); if (ret) return ret; -- cgit v1.2.3 From dcba52ace7d4c12e2c8c273eff55ea03a84c8baf Mon Sep 17 00:00:00 2001 From: Jerome Brunet Date: Fri, 26 Apr 2024 17:29:39 +0200 Subject: ASoC: meson: axg-card: make links nonatomic Non atomic operations need to be performed in the trigger callback of the TDM interfaces. Those are BEs but what matters is the nonatomic flag of the FE in the DPCM context. Just set nonatomic for everything so, at least, what is done is clear. Fixes: 7864a79f37b5 ("ASoC: meson: add axg sound card support") Signed-off-by: Jerome Brunet Link: https://lore.kernel.org/r/20240426152946.3078805-3-jbrunet@baylibre.com Signed-off-by: Mark Brown --- sound/soc/meson/axg-card.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/soc/meson/axg-card.c b/sound/soc/meson/axg-card.c index 3180aa4d3a15..8c5605c1e34e 100644 --- a/sound/soc/meson/axg-card.c +++ b/sound/soc/meson/axg-card.c @@ -318,6 +318,7 @@ static int axg_card_add_link(struct snd_soc_card *card, struct device_node *np, dai_link->cpus = cpu; dai_link->num_cpus = 1; + dai_link->nonatomic = true; ret = meson_card_parse_dai(card, np, dai_link->cpus); if (ret) -- cgit v1.2.3 From f949ed458ad15a00d41b37c745ebadaef171aaae Mon Sep 17 00:00:00 2001 From: Jerome Brunet Date: Fri, 26 Apr 2024 17:29:40 +0200 Subject: ASoC: meson: axg-tdm-interface: manage formatters in trigger So far, the formatters have been reset/enabled using the .prepare() callback. This was done in this callback because walking the formatters use a mutex. A mutex is used because formatter handling require dealing possibly slow clock operation. With the support of non-atomic, .trigger() callback may be used which also allows to properly enable and disable formatters on start but also pause/resume. This solve a random shift on TDMIN as well repeated samples on for TDMOUT. Fixes: d60e4f1e4be5 ("ASoC: meson: add tdm interface driver") Signed-off-by: Jerome Brunet Link: https://lore.kernel.org/r/20240426152946.3078805-4-jbrunet@baylibre.com Signed-off-by: Mark Brown --- sound/soc/meson/axg-tdm-interface.c | 34 +++++++++++++++++++--------------- 1 file changed, 19 insertions(+), 15 deletions(-) diff --git a/sound/soc/meson/axg-tdm-interface.c b/sound/soc/meson/axg-tdm-interface.c index bf708717635b..8bf3735dedaa 100644 --- a/sound/soc/meson/axg-tdm-interface.c +++ b/sound/soc/meson/axg-tdm-interface.c @@ -349,26 +349,31 @@ static int axg_tdm_iface_hw_params(struct snd_pcm_substream *substream, return 0; } -static int axg_tdm_iface_hw_free(struct snd_pcm_substream *substream, +static int axg_tdm_iface_trigger(struct snd_pcm_substream *substream, + int cmd, struct snd_soc_dai *dai) { - struct axg_tdm_stream *ts = snd_soc_dai_get_dma_data(dai, substream); + struct axg_tdm_stream *ts = + snd_soc_dai_get_dma_data(dai, substream); - /* Stop all attached formatters */ - axg_tdm_stream_stop(ts); + switch (cmd) { + case SNDRV_PCM_TRIGGER_START: + case SNDRV_PCM_TRIGGER_RESUME: + case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: + axg_tdm_stream_start(ts); + break; + case SNDRV_PCM_TRIGGER_SUSPEND: + case SNDRV_PCM_TRIGGER_PAUSE_PUSH: + case SNDRV_PCM_TRIGGER_STOP: + axg_tdm_stream_stop(ts); + break; + default: + return -EINVAL; + } return 0; } -static int axg_tdm_iface_prepare(struct snd_pcm_substream *substream, - struct snd_soc_dai *dai) -{ - struct axg_tdm_stream *ts = snd_soc_dai_get_dma_data(dai, substream); - - /* Force all attached formatters to update */ - return axg_tdm_stream_reset(ts); -} - static int axg_tdm_iface_remove_dai(struct snd_soc_dai *dai) { int stream; @@ -412,8 +417,7 @@ static const struct snd_soc_dai_ops axg_tdm_iface_ops = { .set_fmt = axg_tdm_iface_set_fmt, .startup = axg_tdm_iface_startup, .hw_params = axg_tdm_iface_hw_params, - .prepare = axg_tdm_iface_prepare, - .hw_free = axg_tdm_iface_hw_free, + .trigger = axg_tdm_iface_trigger, }; /* TDM Backend DAIs */ -- cgit v1.2.3 From a5a89037d080e0870d7517c61f8b2123d58ab33b Mon Sep 17 00:00:00 2001 From: Jerome Brunet Date: Fri, 26 Apr 2024 17:29:41 +0200 Subject: ASoC: meson: axg-tdm: add continuous clock support Some devices may need the clocks running, even while paused. Add support for this use case. Signed-off-by: Jerome Brunet Link: https://lore.kernel.org/r/20240426152946.3078805-5-jbrunet@baylibre.com Signed-off-by: Mark Brown --- sound/soc/meson/axg-tdm-formatter.c | 40 +++++++++++++++++++++++++++++++++++++ sound/soc/meson/axg-tdm-interface.c | 16 ++++++++++++++- sound/soc/meson/axg-tdm.h | 5 +++++ 3 files changed, 60 insertions(+), 1 deletion(-) diff --git a/sound/soc/meson/axg-tdm-formatter.c b/sound/soc/meson/axg-tdm-formatter.c index 63333a2b0a9c..a6579efd3775 100644 --- a/sound/soc/meson/axg-tdm-formatter.c +++ b/sound/soc/meson/axg-tdm-formatter.c @@ -392,6 +392,46 @@ void axg_tdm_stream_free(struct axg_tdm_stream *ts) } EXPORT_SYMBOL_GPL(axg_tdm_stream_free); +int axg_tdm_stream_set_cont_clocks(struct axg_tdm_stream *ts, + unsigned int fmt) +{ + int ret = 0; + + if (fmt & SND_SOC_DAIFMT_CONT) { + /* Clock are already enabled - skipping */ + if (ts->clk_enabled) + return 0; + + ret = clk_prepare_enable(ts->iface->mclk); + if (ret) + return ret; + + ret = clk_prepare_enable(ts->iface->sclk); + if (ret) + goto err_sclk; + + ret = clk_prepare_enable(ts->iface->lrclk); + if (ret) + goto err_lrclk; + + ts->clk_enabled = true; + return 0; + } + + /* Clocks are already disabled - skipping */ + if (!ts->clk_enabled) + return 0; + + clk_disable_unprepare(ts->iface->lrclk); +err_lrclk: + clk_disable_unprepare(ts->iface->sclk); +err_sclk: + clk_disable_unprepare(ts->iface->mclk); + ts->clk_enabled = false; + return ret; +} +EXPORT_SYMBOL_GPL(axg_tdm_stream_set_cont_clocks); + MODULE_DESCRIPTION("Amlogic AXG TDM formatter driver"); MODULE_AUTHOR("Jerome Brunet "); MODULE_LICENSE("GPL v2"); diff --git a/sound/soc/meson/axg-tdm-interface.c b/sound/soc/meson/axg-tdm-interface.c index 8bf3735dedaa..62057c71f742 100644 --- a/sound/soc/meson/axg-tdm-interface.c +++ b/sound/soc/meson/axg-tdm-interface.c @@ -309,6 +309,7 @@ static int axg_tdm_iface_hw_params(struct snd_pcm_substream *substream, struct snd_soc_dai *dai) { struct axg_tdm_iface *iface = snd_soc_dai_get_drvdata(dai); + struct axg_tdm_stream *ts = snd_soc_dai_get_dma_data(dai, substream); int ret; switch (iface->fmt & SND_SOC_DAIFMT_FORMAT_MASK) { @@ -346,7 +347,19 @@ static int axg_tdm_iface_hw_params(struct snd_pcm_substream *substream, return ret; } - return 0; + ret = axg_tdm_stream_set_cont_clocks(ts, iface->fmt); + if (ret) + dev_err(dai->dev, "failed to apply continuous clock setting\n"); + + return ret; +} + +static int axg_tdm_iface_hw_free(struct snd_pcm_substream *substream, + struct snd_soc_dai *dai) +{ + struct axg_tdm_stream *ts = snd_soc_dai_get_dma_data(dai, substream); + + return axg_tdm_stream_set_cont_clocks(ts, 0); } static int axg_tdm_iface_trigger(struct snd_pcm_substream *substream, @@ -417,6 +430,7 @@ static const struct snd_soc_dai_ops axg_tdm_iface_ops = { .set_fmt = axg_tdm_iface_set_fmt, .startup = axg_tdm_iface_startup, .hw_params = axg_tdm_iface_hw_params, + .hw_free = axg_tdm_iface_hw_free, .trigger = axg_tdm_iface_trigger, }; diff --git a/sound/soc/meson/axg-tdm.h b/sound/soc/meson/axg-tdm.h index 42f7470b9a7f..daaca10fec9e 100644 --- a/sound/soc/meson/axg-tdm.h +++ b/sound/soc/meson/axg-tdm.h @@ -58,12 +58,17 @@ struct axg_tdm_stream { unsigned int physical_width; u32 *mask; bool ready; + + /* For continuous clock tracking */ + bool clk_enabled; }; struct axg_tdm_stream *axg_tdm_stream_alloc(struct axg_tdm_iface *iface); void axg_tdm_stream_free(struct axg_tdm_stream *ts); int axg_tdm_stream_start(struct axg_tdm_stream *ts); void axg_tdm_stream_stop(struct axg_tdm_stream *ts); +int axg_tdm_stream_set_cont_clocks(struct axg_tdm_stream *ts, + unsigned int fmt); static inline int axg_tdm_stream_reset(struct axg_tdm_stream *ts) { -- cgit v1.2.3 From 6db26f9ea4edd8a17d39ab3c20111e3ccd704aef Mon Sep 17 00:00:00 2001 From: Jerome Brunet Date: Fri, 26 Apr 2024 15:41:47 +0200 Subject: ASoC: meson: cards: select SND_DYNAMIC_MINORS Amlogic sound cards do create a lot of pcm interfaces, possibly more than 8. Some pcm interfaces are internal (like DPCM backends and c2c) and not exposed to userspace. Those interfaces still increase the number passed to snd_find_free_minor(), which eventually exceeds 8 causing -EBUSY error on card registration if CONFIG_SND_DYNAMIC_MINORS=n and the interface is exposed to userspace. select CONFIG_SND_DYNAMIC_MINORS for Amlogic cards to avoid the problem. Fixes: 7864a79f37b5 ("ASoC: meson: add axg sound card support") Signed-off-by: Jerome Brunet Link: https://lore.kernel.org/r/20240426134150.3053741-1-jbrunet@baylibre.com Signed-off-by: Mark Brown --- sound/soc/meson/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/soc/meson/Kconfig b/sound/soc/meson/Kconfig index b93ea33739f2..6458d5dc4902 100644 --- a/sound/soc/meson/Kconfig +++ b/sound/soc/meson/Kconfig @@ -99,6 +99,7 @@ config SND_MESON_AXG_PDM config SND_MESON_CARD_UTILS tristate + select SND_DYNAMIC_MINORS config SND_MESON_CODEC_GLUE tristate -- cgit v1.2.3 From e8a6a5ad73acbafd98e8fd3f0cbf6e379771bb76 Mon Sep 17 00:00:00 2001 From: Pierre-Louis Bossart Date: Fri, 26 Apr 2024 10:30:33 -0500 Subject: ASoC: da7219-aad: fix usage of device_get_named_child_node() The documentation for device_get_named_child_node() mentions this important point: " The caller is responsible for calling fwnode_handle_put() on the returned fwnode pointer. " Add fwnode_handle_put() to avoid a leaked reference. Signed-off-by: Pierre-Louis Bossart Link: https://lore.kernel.org/r/20240426153033.38500-1-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown --- sound/soc/codecs/da7219-aad.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/sound/soc/codecs/da7219-aad.c b/sound/soc/codecs/da7219-aad.c index 6bc068cdcbe2..15e5e3eb592b 100644 --- a/sound/soc/codecs/da7219-aad.c +++ b/sound/soc/codecs/da7219-aad.c @@ -671,8 +671,10 @@ static struct da7219_aad_pdata *da7219_aad_fw_to_pdata(struct device *dev) return NULL; aad_pdata = devm_kzalloc(dev, sizeof(*aad_pdata), GFP_KERNEL); - if (!aad_pdata) + if (!aad_pdata) { + fwnode_handle_put(aad_np); return NULL; + } aad_pdata->irq = i2c->irq; @@ -753,6 +755,8 @@ static struct da7219_aad_pdata *da7219_aad_fw_to_pdata(struct device *dev) else aad_pdata->adc_1bit_rpt = DA7219_AAD_ADC_1BIT_RPT_1; + fwnode_handle_put(aad_np); + return aad_pdata; } -- cgit v1.2.3 From fbd741f0993203d07b2b6562d68d1e5e4745b59b Mon Sep 17 00:00:00 2001 From: Pierre-Louis Bossart Date: Fri, 26 Apr 2024 10:29:39 -0500 Subject: ASoC: cs35l56: fix usages of device_get_named_child_node() The documentation for device_get_named_child_node() mentions this important point: " The caller is responsible for calling fwnode_handle_put() on the returned fwnode pointer. " Add fwnode_handle_put() to avoid leaked references. Signed-off-by: Pierre-Louis Bossart Link: https://lore.kernel.org/r/20240426152939.38471-1-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown --- sound/soc/codecs/cs35l56.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-) diff --git a/sound/soc/codecs/cs35l56.c b/sound/soc/codecs/cs35l56.c index 6331b8c6136e..4986e78105da 100644 --- a/sound/soc/codecs/cs35l56.c +++ b/sound/soc/codecs/cs35l56.c @@ -1360,6 +1360,7 @@ static int cs35l56_try_get_broken_sdca_spkid_gpio(struct cs35l56_private *cs35l5 "spk-id-gpios", ACPI_TYPE_PACKAGE, &obj); if (ret) { dev_dbg(cs35l56->base.dev, "Could not get spk-id-gpios package: %d\n", ret); + fwnode_handle_put(af01_fwnode); return -ENOENT; } @@ -1367,6 +1368,7 @@ static int cs35l56_try_get_broken_sdca_spkid_gpio(struct cs35l56_private *cs35l5 if (obj->package.count != 4) { dev_warn(cs35l56->base.dev, "Unexpected spk-id element count %d\n", obj->package.count); + fwnode_handle_put(af01_fwnode); return -ENOENT; } @@ -1381,6 +1383,7 @@ static int cs35l56_try_get_broken_sdca_spkid_gpio(struct cs35l56_private *cs35l5 */ ret = acpi_dev_add_driver_gpios(adev, cs35l56_af01_spkid_gpios_mapping); if (ret) { + fwnode_handle_put(af01_fwnode); return dev_err_probe(cs35l56->base.dev, ret, "Failed to add gpio mapping to AF01\n"); } @@ -1388,14 +1391,17 @@ static int cs35l56_try_get_broken_sdca_spkid_gpio(struct cs35l56_private *cs35l5 ret = devm_add_action_or_reset(cs35l56->base.dev, cs35l56_acpi_dev_release_driver_gpios, adev); - if (ret) + if (ret) { + fwnode_handle_put(af01_fwnode); return ret; + } dev_dbg(cs35l56->base.dev, "Added spk-id-gpios mapping to AF01\n"); } desc = fwnode_gpiod_get_index(af01_fwnode, "spk-id", 0, GPIOD_IN, NULL); if (IS_ERR(desc)) { + fwnode_handle_put(af01_fwnode); ret = PTR_ERR(desc); return dev_err_probe(cs35l56->base.dev, ret, "Get GPIO from AF01 failed\n"); } @@ -1404,9 +1410,12 @@ static int cs35l56_try_get_broken_sdca_spkid_gpio(struct cs35l56_private *cs35l5 gpiod_put(desc); if (ret < 0) { + fwnode_handle_put(af01_fwnode); dev_err_probe(cs35l56->base.dev, ret, "Error reading spk-id GPIO\n"); return ret; - } + } + + fwnode_handle_put(af01_fwnode); dev_info(cs35l56->base.dev, "Got spk-id from AF01\n"); -- cgit v1.2.3 From 79ac4c1443eaec0d09355307043a9149287f23c1 Mon Sep 17 00:00:00 2001 From: Pierre-Louis Bossart Date: Fri, 26 Apr 2024 10:28:18 -0500 Subject: ALSA: hda: intel-dsp-config: harden I2C/I2S codec detection MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The SOF driver is selected whenever specific I2C/I2S HIDs are reported as 'present' in the ACPI DSDT. In some cases, an HID is reported but the hardware does not actually rely on I2C/I2S. This false positive leads to an invalid selection of the SOF driver and as a result an invalid topology is loaded. This patch hardens the detection with a check that the NHLT table is consistent with the report of an I2S-based codec in DSDT. This table should expose at least one SSP endpoint configured for an I2S-codec connection. Tested on Huawei Matebook D14 (NBLB-WAX9N) using an HDaudio codec with an invalid ES8336 ACPI HID reported: [ 7.858249] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040380 [ 7.858312] snd_hda_intel 0000:00:1f.3: snd_intel_dsp_find_config: no valid SSP found for HID ESSX8336, skipped Reported-by: Mauro Carvalho Chehab Tested-by: Mauro Carvalho Chehab Closes: https://github.com/thesofproject/linux/issues/4934 Signed-off-by: Pierre-Louis Bossart Reviewed-by: Bard Liao Reviewed-by: Péter Ujfalusi Message-ID: <20240426152818.38443-1-pierre-louis.bossart@linux.intel.com> Signed-off-by: Takashi Iwai --- sound/hda/intel-dsp-config.c | 27 +++++++++++++++++++++++++-- 1 file changed, 25 insertions(+), 2 deletions(-) diff --git a/sound/hda/intel-dsp-config.c b/sound/hda/intel-dsp-config.c index 6a384b922e4f..d1f6cdcf1866 100644 --- a/sound/hda/intel-dsp-config.c +++ b/sound/hda/intel-dsp-config.c @@ -557,9 +557,32 @@ static const struct config_entry *snd_intel_dsp_find_config if (table->codec_hid) { int i; - for (i = 0; i < table->codec_hid->num_codecs; i++) - if (acpi_dev_present(table->codec_hid->codecs[i], NULL, -1)) + for (i = 0; i < table->codec_hid->num_codecs; i++) { + struct nhlt_acpi_table *nhlt; + bool ssp_found = false; + + if (!acpi_dev_present(table->codec_hid->codecs[i], NULL, -1)) + continue; + + nhlt = intel_nhlt_init(&pci->dev); + if (!nhlt) { + dev_warn(&pci->dev, "%s: NHLT table not found, skipped HID %s\n", + __func__, table->codec_hid->codecs[i]); + continue; + } + + if (intel_nhlt_has_endpoint_type(nhlt, NHLT_LINK_SSP) && + intel_nhlt_ssp_endpoint_mask(nhlt, NHLT_DEVICE_I2S)) + ssp_found = true; + + intel_nhlt_free(nhlt); + + if (ssp_found) break; + + dev_warn(&pci->dev, "%s: no valid SSP found for HID %s, skipped\n", + __func__, table->codec_hid->codecs[i]); + } if (i == table->codec_hid->num_codecs) continue; } -- cgit v1.2.3 From c158cf914713efc3bcdc25680c7156c48c12ef6a Mon Sep 17 00:00:00 2001 From: Pierre-Louis Bossart Date: Fri, 26 Apr 2024 10:27:31 -0500 Subject: ALSA: hda: intel-sdw-acpi: fix usage of device_get_named_child_node() The documentation for device_get_named_child_node() mentions this important point: " The caller is responsible for calling fwnode_handle_put() on the returned fwnode pointer. " Add fwnode_handle_put() to avoid a leaked reference. Signed-off-by: Pierre-Louis Bossart Fixes: 08c2a4bc9f2a ("ALSA: hda: move Intel SoundWire ACPI scan to dedicated module") Message-ID: <20240426152731.38420-1-pierre-louis.bossart@linux.intel.com> Signed-off-by: Takashi Iwai --- sound/hda/intel-sdw-acpi.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/sound/hda/intel-sdw-acpi.c b/sound/hda/intel-sdw-acpi.c index 5f60658c6051..d7417a40392b 100644 --- a/sound/hda/intel-sdw-acpi.c +++ b/sound/hda/intel-sdw-acpi.c @@ -45,6 +45,8 @@ static bool is_link_enabled(struct fwnode_handle *fw_node, u8 idx) "intel-quirk-mask", &quirk_mask); + fwnode_handle_put(link); + if (quirk_mask & SDW_INTEL_QUIRK_MASK_BUS_DISABLE) return false; -- cgit v1.2.3 From 5d211c7090590033581175d6405ae40917ca3a06 Mon Sep 17 00:00:00 2001 From: Dave Jiang Date: Fri, 26 Apr 2024 15:47:56 -0700 Subject: cxl: Fix cxl_endpoint_get_perf_coordinate() support for RCH Robert reported the following when booting a CXL host with Restricted CXL Host (RCH) topology: [ 39.815379] cxl_acpi ACPI0017:00: not a cxl_port device [ 39.827123] WARNING: CPU: 46 PID: 1754 at drivers/cxl/core/port.c:592 to_cxl_port+0x56/0x70 [cxl_core] ... plus some related subsequent NULL pointer dereference: [ 40.718708] BUG: kernel NULL pointer dereference, address: 00000000000002d8 The iterator to walk the PCIe path did not account for RCH topology. However RCH does not support hotplug and the memory exported by the Restricted CXL Device (RCD) should be covered by HMAT and therefore no access_coordinate is needed. Add check to see if the endpoint device is RCD and skip calculation. Also add a call to cxl_endpoint_get_perf_coordinates() in cxl_test in order to exercise the topology iterator. The dev_is_pci() check added is to help with this test and should be harmless for normal operation. Reported-by: Robert Richter Closes: https://lore.kernel.org/all/Ziv8GfSMSbvlBB0h@rric.localdomain/ Fixes: 592780b8391f ("cxl: Fix retrieving of access_coordinates in PCIe path") Reviewed-by: Dan Williams Tested-by: Robert Richter Reviewed-by: Robert Richter Link: https://lore.kernel.org/r/20240426224913.1027420-1-dave.jiang@intel.com Signed-off-by: Dave Jiang --- drivers/cxl/core/port.c | 15 ++++++++++++++- tools/testing/cxl/test/cxl.c | 7 +++++++ 2 files changed, 21 insertions(+), 1 deletion(-) diff --git a/drivers/cxl/core/port.c b/drivers/cxl/core/port.c index 762783bb091a..887ed6e358fb 100644 --- a/drivers/cxl/core/port.c +++ b/drivers/cxl/core/port.c @@ -2184,6 +2184,7 @@ static bool parent_port_is_cxl_root(struct cxl_port *port) int cxl_endpoint_get_perf_coordinates(struct cxl_port *port, struct access_coordinate *coord) { + struct cxl_memdev *cxlmd = to_cxl_memdev(port->uport_dev); struct access_coordinate c[] = { { .read_bandwidth = UINT_MAX, @@ -2197,12 +2198,20 @@ int cxl_endpoint_get_perf_coordinates(struct cxl_port *port, struct cxl_port *iter = port; struct cxl_dport *dport; struct pci_dev *pdev; + struct device *dev; unsigned int bw; bool is_cxl_root; if (!is_cxl_endpoint(port)) return -EINVAL; + /* + * Skip calculation for RCD. Expectation is HMAT already covers RCD case + * since RCH does not support hotplug. + */ + if (cxlmd->cxlds->rcd) + return 0; + /* * Exit the loop when the parent port of the current iter port is cxl * root. The iterative loop starts at the endpoint and gathers the @@ -2232,8 +2241,12 @@ int cxl_endpoint_get_perf_coordinates(struct cxl_port *port, return -EINVAL; cxl_coordinates_combine(c, c, dport->coord); + dev = port->uport_dev->parent; + if (!dev_is_pci(dev)) + return -ENODEV; + /* Get the calculated PCI paths bandwidth */ - pdev = to_pci_dev(port->uport_dev->parent); + pdev = to_pci_dev(dev); bw = pcie_bandwidth_available(pdev, NULL, NULL, NULL); if (bw == 0) return -ENXIO; diff --git a/tools/testing/cxl/test/cxl.c b/tools/testing/cxl/test/cxl.c index 61c69297e797..3482248aa344 100644 --- a/tools/testing/cxl/test/cxl.c +++ b/tools/testing/cxl/test/cxl.c @@ -1001,6 +1001,7 @@ static void mock_cxl_endpoint_parse_cdat(struct cxl_port *port) struct cxl_memdev *cxlmd = to_cxl_memdev(port->uport_dev); struct cxl_dev_state *cxlds = cxlmd->cxlds; struct cxl_memdev_state *mds = to_cxl_memdev_state(cxlds); + struct access_coordinate ep_c[ACCESS_COORDINATE_MAX]; struct range pmem_range = { .start = cxlds->pmem_res.start, .end = cxlds->pmem_res.end, @@ -1020,6 +1021,12 @@ static void mock_cxl_endpoint_parse_cdat(struct cxl_port *port) dpa_perf_setup(port, &pmem_range, &mds->pmem_perf); cxl_memdev_update_perf(cxlmd); + + /* + * This function is here to only test the topology iterator. It serves + * no other purpose. + */ + cxl_endpoint_get_perf_coordinates(port, ep_c); } static struct cxl_mock_ops cxl_mock_ops = { -- cgit v1.2.3 From da7c622cddd4fe36be69ca61e8c42e43cde94784 Mon Sep 17 00:00:00 2001 From: Bui Quang Minh Date: Wed, 24 Apr 2024 21:44:22 +0700 Subject: s390/cio: Ensure the copied buf is NUL terminated Currently, we allocate a lbuf-sized kernel buffer and copy lbuf from userspace to that buffer. Later, we use scanf on this buffer but we don't ensure that the string is terminated inside the buffer, this can lead to OOB read when using scanf. Fix this issue by using memdup_user_nul instead. Fixes: a4f17cc72671 ("s390/cio: add CRW inject functionality") Signed-off-by: Bui Quang Minh Reviewed-by: Heiko Carstens Link: https://lore.kernel.org/r/20240424-fix-oob-read-v2-5-f1f1b53a10f4@gmail.com Signed-off-by: Alexander Gordeev --- drivers/s390/cio/cio_inject.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/s390/cio/cio_inject.c b/drivers/s390/cio/cio_inject.c index 8613fa937237..a2e771ebae8e 100644 --- a/drivers/s390/cio/cio_inject.c +++ b/drivers/s390/cio/cio_inject.c @@ -95,7 +95,7 @@ static ssize_t crw_inject_write(struct file *file, const char __user *buf, return -EINVAL; } - buffer = vmemdup_user(buf, lbuf); + buffer = memdup_user_nul(buf, lbuf); if (IS_ERR(buffer)) return -ENOMEM; -- cgit v1.2.3 From 720a22fd6c1cdadf691281909950c0cbc5cdf17e Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Fri, 26 Apr 2024 00:30:36 +0200 Subject: x86/apic: Don't access the APIC when disabling x2APIC With 'iommu=off' on the kernel command line and x2APIC enabled by the BIOS the code which disables the x2APIC triggers an unchecked MSR access error: RDMSR from 0x802 at rIP: 0xffffffff94079992 (native_apic_msr_read+0x12/0x50) This is happens because default_acpi_madt_oem_check() selects an x2APIC driver before the x2APIC is disabled. When the x2APIC is disabled because interrupt remapping cannot be enabled due to 'iommu=off' on the command line, x2apic_disable() invokes apic_set_fixmap() which in turn tries to read the APIC ID. This triggers the MSR warning because x2APIC is disabled, but the APIC driver is still x2APIC based. Prevent that by adding an argument to apic_set_fixmap() which makes the APIC ID read out conditional and set it to false from the x2APIC disable path. That's correct as the APIC ID has already been read out during early discovery. Fixes: d10a904435fa ("x86/apic: Consolidate boot_cpu_physical_apicid initialization sites") Reported-by: Adrian Huang Signed-off-by: Thomas Gleixner Signed-off-by: Borislav Petkov (AMD) Signed-off-by: Ingo Molnar Tested-by: Adrian Huang Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/875xw5t6r7.ffs@tglx --- arch/x86/kernel/apic/apic.c | 16 +++++++++++----- 1 file changed, 11 insertions(+), 5 deletions(-) diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c index c342c4aa9c68..803dcfb0e346 100644 --- a/arch/x86/kernel/apic/apic.c +++ b/arch/x86/kernel/apic/apic.c @@ -1771,7 +1771,7 @@ void x2apic_setup(void) __x2apic_enable(); } -static __init void apic_set_fixmap(void); +static __init void apic_set_fixmap(bool read_apic); static __init void x2apic_disable(void) { @@ -1793,7 +1793,12 @@ static __init void x2apic_disable(void) } __x2apic_disable(); - apic_set_fixmap(); + /* + * Don't reread the APIC ID as it was already done from + * check_x2apic() and the APIC driver still is a x2APIC variant, + * which fails to do the read after x2APIC was disabled. + */ + apic_set_fixmap(false); } static __init void x2apic_enable(void) @@ -2057,13 +2062,14 @@ void __init init_apic_mappings(void) } } -static __init void apic_set_fixmap(void) +static __init void apic_set_fixmap(bool read_apic) { set_fixmap_nocache(FIX_APIC_BASE, mp_lapic_addr); apic_mmio_base = APIC_BASE; apic_printk(APIC_VERBOSE, "mapped APIC to %16lx (%16lx)\n", apic_mmio_base, mp_lapic_addr); - apic_read_boot_cpu_id(false); + if (read_apic) + apic_read_boot_cpu_id(false); } void __init register_lapic_address(unsigned long address) @@ -2073,7 +2079,7 @@ void __init register_lapic_address(unsigned long address) mp_lapic_addr = address; if (!x2apic_mode) - apic_set_fixmap(); + apic_set_fixmap(true); } /* -- cgit v1.2.3 From 00e7d3bea2ce7dac7bee1cf501fb071fd0ea8f6c Mon Sep 17 00:00:00 2001 From: Jim Cromie Date: Mon, 29 Apr 2024 13:31:11 -0600 Subject: dyndbg: fix old BUG_ON in >control parser Fix a BUG_ON from 2009. Even if it looks "unreachable" (I didn't really look), lets make sure by removing it, doing pr_err and return -EINVAL instead. Cc: stable Signed-off-by: Jim Cromie Link: https://lore.kernel.org/r/20240429193145.66543-2-jim.cromie@gmail.com Signed-off-by: Greg Kroah-Hartman --- lib/dynamic_debug.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/lib/dynamic_debug.c b/lib/dynamic_debug.c index c78f335fa981..f2c5e7910bb1 100644 --- a/lib/dynamic_debug.c +++ b/lib/dynamic_debug.c @@ -302,7 +302,11 @@ static int ddebug_tokenize(char *buf, char *words[], int maxwords) } else { for (end = buf; *end && !isspace(*end); end++) ; - BUG_ON(end == buf); + if (end == buf) { + pr_err("parse err after word:%d=%s\n", nwords, + nwords ? words[nwords - 1] : ""); + return -EINVAL; + } } /* `buf' is start of word, `end' is one past its end */ -- cgit v1.2.3 From 63a6ce5a1a6261e4c70bad2b55c4e0de8da4762e Mon Sep 17 00:00:00 2001 From: Qu Wenruo Date: Tue, 16 Apr 2024 08:07:00 +0930 Subject: btrfs: set correct ram_bytes when splitting ordered extent [BUG] When running generic/287, the following file extent items can be generated: item 16 key (258 EXTENT_DATA 2682880) itemoff 15305 itemsize 53 generation 9 type 1 (regular) extent data disk byte 1378414592 nr 462848 extent data offset 0 nr 462848 ram 2097152 extent compression 0 (none) Note that file extent item is not a compressed one, but its ram_bytes is way larger than its disk_num_bytes. According to btrfs on-disk scheme, ram_bytes should match disk_num_bytes if it's not a compressed one. [CAUSE] Since commit b73a6fd1b1ef ("btrfs: split partial dio bios before submit"), for partial dio writes, we would split the ordered extent. However the function btrfs_split_ordered_extent() doesn't update the ram_bytes even it has already shrunk the disk_num_bytes. Originally the function btrfs_split_ordered_extent() is only introduced for zoned devices in commit d22002fd37bd ("btrfs: zoned: split ordered extent when bio is sent"), but later commit b73a6fd1b1ef ("btrfs: split partial dio bios before submit") makes non-zoned btrfs affected. Thankfully for un-compressed file extent, we do not really utilize the ram_bytes member, thus it won't cause any real problem. [FIX] Also update btrfs_ordered_extent::ram_bytes inside btrfs_split_ordered_extent(). Fixes: d22002fd37bd ("btrfs: zoned: split ordered extent when bio is sent") CC: stable@vger.kernel.org # 5.15+ Reviewed-by: Filipe Manana Signed-off-by: Qu Wenruo Reviewed-by: David Sterba Signed-off-by: David Sterba --- fs/btrfs/ordered-data.c | 1 + 1 file changed, 1 insertion(+) diff --git a/fs/btrfs/ordered-data.c b/fs/btrfs/ordered-data.c index b749ba45da2b..c2a42bcde98e 100644 --- a/fs/btrfs/ordered-data.c +++ b/fs/btrfs/ordered-data.c @@ -1188,6 +1188,7 @@ struct btrfs_ordered_extent *btrfs_split_ordered_extent( ordered->disk_bytenr += len; ordered->num_bytes -= len; ordered->disk_num_bytes -= len; + ordered->ram_bytes -= len; if (test_bit(BTRFS_ORDERED_IO_DONE, &ordered->flags)) { ASSERT(ordered->bytes_left == 0); -- cgit v1.2.3 From fe81f354841641c7f71163b84912b25c169ed8ec Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Mon, 29 Apr 2024 08:40:10 -0700 Subject: usb: ohci: Prevent missed ohci interrupts Testing ohci functionality with qemu's pci-ohci emulation often results in ohci interface stalls, resulting in hung task timeouts. The problem is caused by lost interrupts between the emulation and the Linux kernel code. Additional interrupts raised while the ohci interrupt handler in Linux is running and before the handler clears the interrupt status are not handled. The fix for a similar problem in ehci suggests that the problem is likely caused by edge-triggered MSI interrupts. See commit 0b60557230ad ("usb: ehci: Prevent missed ehci interrupts with edge-triggered MSI") for details. Ensure that the ohci interrupt code handles all pending interrupts before returning to solve the problem. Cc: Gerd Hoffmann Cc: David Laight Cc: stable@vger.kernel.org Fixes: 306c54d0edb6 ("usb: hcd: Try MSI interrupts on PCI devices") Signed-off-by: Guenter Roeck Reviewed-by: Alan Stern Reviewed-by: Gerd Hoffmann Link: https://lore.kernel.org/r/20240429154010.1507366-1-linux@roeck-us.net Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ohci-hcd.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c index 4f9982ecfb58..5cec7640e913 100644 --- a/drivers/usb/host/ohci-hcd.c +++ b/drivers/usb/host/ohci-hcd.c @@ -888,6 +888,7 @@ static irqreturn_t ohci_irq (struct usb_hcd *hcd) /* Check for an all 1's result which is a typical consequence * of dead, unclocked, or unplugged (CardBus...) devices */ +again: if (ints == ~(u32)0) { ohci->rh_state = OHCI_RH_HALTED; ohci_dbg (ohci, "device removed!\n"); @@ -982,6 +983,13 @@ static irqreturn_t ohci_irq (struct usb_hcd *hcd) } spin_unlock(&ohci->lock); + /* repeat until all enabled interrupts are handled */ + if (ohci->rh_state != OHCI_RH_HALTED) { + ints = ohci_readl(ohci, ®s->intrstatus); + if (ints && (ints & ohci_readl(ohci, ®s->intrenable))) + goto again; + } + return IRQ_HANDLED; } -- cgit v1.2.3 From c78c3644b772e356ca452ae733a3c4de0fb11dc8 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Tue, 30 Apr 2024 10:33:48 -0400 Subject: usb: Fix regression caused by invalid ep0 maxpacket in virtual SuperSpeed device A virtual SuperSpeed device in the FreeBSD BVCP package (https://bhyve.npulse.net/) presents an invalid ep0 maxpacket size of 256. It stopped working with Linux following a recent commit because now we check these sizes more carefully than before. Fix this regression by using the bMaxpacketSize0 value in the device descriptor for SuperSpeed or faster devices, even if it is invalid. This is a very simple-minded change; we might want to check more carefully for values that actually make some sense (for instance, no smaller than 64). Signed-off-by: Alan Stern Reported-and-tested-by: Roger Whittaker Closes: https://bugzilla.suse.com/show_bug.cgi?id=1220569 Link: https://lore.kernel.org/linux-usb/9efbd569-7059-4575-983f-0ea30df41871@suse.com/ Fixes: 59cf44575456 ("USB: core: Fix oversight in SuperSpeed initialization") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/4058ac05-237c-4db4-9ecc-5af42bdb4501@rowland.harvard.edu Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hub.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 9446660e231b..008053039875 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -5110,9 +5110,10 @@ hub_port_init(struct usb_hub *hub, struct usb_device *udev, int port1, } if (usb_endpoint_maxp(&udev->ep0.desc) == i) { ; /* Initial ep0 maxpacket guess is right */ - } else if ((udev->speed == USB_SPEED_FULL || + } else if (((udev->speed == USB_SPEED_FULL || udev->speed == USB_SPEED_HIGH) && - (i == 8 || i == 16 || i == 32 || i == 64)) { + (i == 8 || i == 16 || i == 32 || i == 64)) || + (udev->speed >= USB_SPEED_SUPER && i > 0)) { /* Initial guess is wrong; use the descriptor's value */ if (udev->speed == USB_SPEED_FULL) dev_dbg(&udev->dev, "ep0 maxpacket = %d\n", i); -- cgit v1.2.3 From 1e707769df072757bdcafab158bb159ead73daa4 Mon Sep 17 00:00:00 2001 From: Kailang Yang Date: Tue, 30 Apr 2024 17:15:53 +0800 Subject: ALSA: hda/realtek - Set GPIO3 to default at S4 state for Thinkpad with ALC1318 There is a chance of damaging the IC when S4 resume. Add safe mode for no stream to disable GPIO3. Thinkpad with ALC1318 platform need to add this workaround. Signed-off-by: Kailang Yang Link: https://lore.kernel.org/r/a853dc4f0a4e412381d5f60565181247@realtek.com Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 51 ++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 50 insertions(+), 1 deletion(-) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index e77013309795..b96c6863f272 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -920,6 +920,8 @@ static void alc_pre_init(struct hda_codec *codec) ((codec)->core.dev.power.power_state.event == PM_EVENT_RESUME) #define is_s4_resume(codec) \ ((codec)->core.dev.power.power_state.event == PM_EVENT_RESTORE) +#define is_s4_suspend(codec) \ + ((codec)->core.dev.power.power_state.event == PM_EVENT_FREEZE) static int alc_init(struct hda_codec *codec) { @@ -7183,6 +7185,44 @@ static void alc245_fixup_hp_spectre_x360_eu0xxx(struct hda_codec *codec, alc245_fixup_hp_gpio_led(codec, fix, action); } +/* + * ALC287 PCM hooks + */ +static void alc287_alc1318_playback_pcm_hook(struct hda_pcm_stream *hinfo, + struct hda_codec *codec, + struct snd_pcm_substream *substream, + int action) +{ + alc_write_coef_idx(codec, 0x10, 0x8806); /* Change MLK to GPIO3 */ + switch (action) { + case HDA_GEN_PCM_ACT_OPEN: + alc_write_coefex_idx(codec, 0x5a, 0x00, 0x954f); /* write gpio3 to high */ + break; + case HDA_GEN_PCM_ACT_CLOSE: + alc_write_coefex_idx(codec, 0x5a, 0x00, 0x554f); /* write gpio3 as default value */ + break; + } +} + +static void alc287_s4_power_gpio3_default(struct hda_codec *codec) +{ + if (is_s4_suspend(codec)) { + alc_write_coef_idx(codec, 0x10, 0x8806); /* Change MLK to GPIO3 */ + alc_write_coefex_idx(codec, 0x5a, 0x00, 0x554f); /* write gpio3 as default value */ + } +} + +static void alc287_fixup_lenovo_thinkpad_with_alc1318(struct hda_codec *codec, + const struct hda_fixup *fix, int action) +{ + struct alc_spec *spec = codec->spec; + + if (action != HDA_FIXUP_ACT_PRE_PROBE) + return; + spec->power_hook = alc287_s4_power_gpio3_default; + spec->gen.pcm_playback_hook = alc287_alc1318_playback_pcm_hook; +} + enum { ALC269_FIXUP_GPIO2, @@ -7470,7 +7510,8 @@ enum { ALC285_FIXUP_ASUS_GA403U_HEADSET_MIC, ALC285_FIXUP_ASUS_GA403U_I2C_SPEAKER2_TO_DAC1, ALC285_FIXUP_ASUS_GU605_SPI_2_HEADSET_MIC, - ALC285_FIXUP_ASUS_GU605_SPI_SPEAKER2_TO_DAC1 + ALC285_FIXUP_ASUS_GU605_SPI_SPEAKER2_TO_DAC1, + ALC287_FIXUP_LENOVO_THKPAD_WH_ALC1318, }; /* A special fixup for Lenovo C940 and Yoga Duet 7; @@ -9726,6 +9767,12 @@ static const struct hda_fixup alc269_fixups[] = { .chained = true, .chain_id = ALC285_FIXUP_ASUS_GA403U, }, + [ALC287_FIXUP_LENOVO_THKPAD_WH_ALC1318] = { + .type = HDA_FIXUP_FUNC, + .v.func = alc287_fixup_lenovo_thinkpad_with_alc1318, + .chained = true, + .chain_id = ALC269_FIXUP_THINKPAD_ACPI + }, }; static const struct snd_pci_quirk alc269_fixup_tbl[] = { @@ -10394,6 +10441,8 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x17aa, 0x2318, "Thinkpad Z13 Gen2", ALC287_FIXUP_MG_RTKC_CSAMP_CS35L41_I2C_THINKPAD), SND_PCI_QUIRK(0x17aa, 0x2319, "Thinkpad Z16 Gen2", ALC287_FIXUP_MG_RTKC_CSAMP_CS35L41_I2C_THINKPAD), SND_PCI_QUIRK(0x17aa, 0x231a, "Thinkpad Z16 Gen2", ALC287_FIXUP_MG_RTKC_CSAMP_CS35L41_I2C_THINKPAD), + SND_PCI_QUIRK(0x17aa, 0x231e, "Thinkpad", ALC287_FIXUP_LENOVO_THKPAD_WH_ALC1318), + SND_PCI_QUIRK(0x17aa, 0x231f, "Thinkpad", ALC287_FIXUP_LENOVO_THKPAD_WH_ALC1318), SND_PCI_QUIRK(0x17aa, 0x30bb, "ThinkCentre AIO", ALC233_FIXUP_LENOVO_LINE2_MIC_HOTKEY), SND_PCI_QUIRK(0x17aa, 0x30e2, "ThinkCentre AIO", ALC233_FIXUP_LENOVO_LINE2_MIC_HOTKEY), SND_PCI_QUIRK(0x17aa, 0x310c, "ThinkCentre Station", ALC294_FIXUP_LENOVO_MIC_LOCATION), -- cgit v1.2.3 From 39815cdfc8d46ce2c72cbf2aa3d991c4bfb0024f Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 30 Apr 2024 18:32:04 +0200 Subject: ALSA: hda/realtek: Fix conflicting PCI SSID 17aa:386f for Lenovo Legion models Unfortunately both Lenovo Legion Pro 7 16ARX8H and Legion 7i 16IAX7 got the very same PCI SSID while the hardware implementations are completely different (the former is with TI TAS2781 codec while the latter is with Cirrus CS35L41 codec). The former model got broken by the recent fix for the latter model. For addressing the regression, check the codec SSID and apply the proper quirk for each model now. Fixes: 24b6332c2d4f ("ALSA: hda: Add Lenovo Legion 7i gen7 sound quirk") Cc: Link: https://bugzilla.suse.com/show_bug.cgi?id=1223462 Message-ID: <20240430163206.5200-1-tiwai@suse.de> Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 24 +++++++++++++++++++++++- 1 file changed, 23 insertions(+), 1 deletion(-) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index b96c6863f272..e704425788eb 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -7466,6 +7466,7 @@ enum { ALC287_FIXUP_YOGA7_14ITL_SPEAKERS, ALC298_FIXUP_LENOVO_C940_DUET7, ALC287_FIXUP_LENOVO_14IRP8_DUETITL, + ALC287_FIXUP_LENOVO_LEGION_7, ALC287_FIXUP_13S_GEN2_SPEAKERS, ALC256_FIXUP_SET_COEF_DEFAULTS, ALC256_FIXUP_SYSTEM76_MIC_NO_PRESENCE, @@ -7551,6 +7552,23 @@ static void alc287_fixup_lenovo_14irp8_duetitl(struct hda_codec *codec, __snd_hda_apply_fixup(codec, id, action, 0); } +/* Another hilarious PCI SSID conflict with Lenovo Legion Pro 7 16ARX8H (with + * TAS2781 codec) and Legion 7i 16IAX7 (with CS35L41 codec); + * we apply a corresponding fixup depending on the codec SSID instead + */ +static void alc287_fixup_lenovo_legion_7(struct hda_codec *codec, + const struct hda_fixup *fix, + int action) +{ + int id; + + if (codec->core.subsystem_id == 0x17aa38a8) + id = ALC287_FIXUP_TAS2781_I2C; /* Legion Pro 7 16ARX8H */ + else + id = ALC287_FIXUP_CS35L41_I2C_2; /* Legion 7i 16IAX7 */ + __snd_hda_apply_fixup(codec, id, action, 0); +} + static const struct hda_fixup alc269_fixups[] = { [ALC269_FIXUP_GPIO2] = { .type = HDA_FIXUP_FUNC, @@ -9445,6 +9463,10 @@ static const struct hda_fixup alc269_fixups[] = { .type = HDA_FIXUP_FUNC, .v.func = alc287_fixup_lenovo_14irp8_duetitl, }, + [ALC287_FIXUP_LENOVO_LEGION_7] = { + .type = HDA_FIXUP_FUNC, + .v.func = alc287_fixup_lenovo_legion_7, + }, [ALC287_FIXUP_13S_GEN2_SPEAKERS] = { .type = HDA_FIXUP_VERBS, .v.verbs = (const struct hda_verb[]) { @@ -10472,7 +10494,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x17aa, 0x3853, "Lenovo Yoga 7 15ITL5", ALC287_FIXUP_YOGA7_14ITL_SPEAKERS), SND_PCI_QUIRK(0x17aa, 0x3855, "Legion 7 16ITHG6", ALC287_FIXUP_LEGION_16ITHG6), SND_PCI_QUIRK(0x17aa, 0x3869, "Lenovo Yoga7 14IAL7", ALC287_FIXUP_YOGA9_14IAP7_BASS_SPK_PIN), - SND_PCI_QUIRK(0x17aa, 0x386f, "Legion 7i 16IAX7", ALC287_FIXUP_CS35L41_I2C_2), + SND_PCI_QUIRK(0x17aa, 0x386f, "Legion Pro 7/7i", ALC287_FIXUP_LENOVO_LEGION_7), SND_PCI_QUIRK(0x17aa, 0x3870, "Lenovo Yoga 7 14ARB7", ALC287_FIXUP_YOGA7_14ARB7_I2C), SND_PCI_QUIRK(0x17aa, 0x3877, "Lenovo Legion 7 Slim 16ARHA7", ALC287_FIXUP_CS35L41_I2C_2), SND_PCI_QUIRK(0x17aa, 0x3878, "Lenovo Legion 7 Slim 16ARHA7", ALC287_FIXUP_CS35L41_I2C_2), -- cgit v1.2.3 From 52a6947bf576b97ff8e14bb0a31c5eaf2d0d96e2 Mon Sep 17 00:00:00 2001 From: Lyude Paul Date: Mon, 29 Apr 2024 14:23:08 -0400 Subject: drm/nouveau/firmware: Fix SG_DEBUG error with nvkm_firmware_ctor() Currently, enabling SG_DEBUG in the kernel will cause nouveau to hit a BUG() on startup: kernel BUG at include/linux/scatterlist.h:187! invalid opcode: 0000 [#1] PREEMPT SMP NOPTI CPU: 7 PID: 930 Comm: (udev-worker) Not tainted 6.9.0-rc3Lyude-Test+ #30 Hardware name: MSI MS-7A39/A320M GAMING PRO (MS-7A39), BIOS 1.I0 01/22/2019 RIP: 0010:sg_init_one+0x85/0xa0 Code: 69 88 32 01 83 e1 03 f6 c3 03 75 20 a8 01 75 1e 48 09 cb 41 89 54 24 08 49 89 1c 24 41 89 6c 24 0c 5b 5d 41 5c e9 7b b9 88 00 <0f> 0b 0f 0b 0f 0b 48 8b 05 5e 46 9a 01 eb b2 66 66 2e 0f 1f 84 00 RSP: 0018:ffffa776017bf6a0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffffa77600d87000 RCX: 000000000000002b RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffffa77680d87000 RBP: 000000000000e000 R08: 0000000000000000 R09: 0000000000000000 R10: ffff98f4c46aa508 R11: 0000000000000000 R12: ffff98f4c46aa508 R13: ffff98f4c46aa008 R14: ffffa77600d4a000 R15: ffffa77600d4a018 FS: 00007feeb5aae980(0000) GS:ffff98f5c4dc0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f22cb9a4520 CR3: 00000001043ba000 CR4: 00000000003506f0 Call Trace: ? die+0x36/0x90 ? do_trap+0xdd/0x100 ? sg_init_one+0x85/0xa0 ? do_error_trap+0x65/0x80 ? sg_init_one+0x85/0xa0 ? exc_invalid_op+0x50/0x70 ? sg_init_one+0x85/0xa0 ? asm_exc_invalid_op+0x1a/0x20 ? sg_init_one+0x85/0xa0 nvkm_firmware_ctor+0x14a/0x250 [nouveau] nvkm_falcon_fw_ctor+0x42/0x70 [nouveau] ga102_gsp_booter_ctor+0xb4/0x1a0 [nouveau] r535_gsp_oneinit+0xb3/0x15f0 [nouveau] ? srso_return_thunk+0x5/0x5f ? srso_return_thunk+0x5/0x5f ? nvkm_udevice_new+0x95/0x140 [nouveau] ? srso_return_thunk+0x5/0x5f ? srso_return_thunk+0x5/0x5f ? ktime_get+0x47/0xb0 ? srso_return_thunk+0x5/0x5f nvkm_subdev_oneinit_+0x4f/0x120 [nouveau] nvkm_subdev_init_+0x39/0x140 [nouveau] ? srso_return_thunk+0x5/0x5f nvkm_subdev_init+0x44/0x90 [nouveau] nvkm_device_init+0x166/0x2e0 [nouveau] nvkm_udevice_init+0x47/0x70 [nouveau] nvkm_object_init+0x41/0x1c0 [nouveau] nvkm_ioctl_new+0x16a/0x290 [nouveau] ? __pfx_nvkm_client_child_new+0x10/0x10 [nouveau] ? __pfx_nvkm_udevice_new+0x10/0x10 [nouveau] nvkm_ioctl+0x126/0x290 [nouveau] nvif_object_ctor+0x112/0x190 [nouveau] nvif_device_ctor+0x23/0x60 [nouveau] nouveau_cli_init+0x164/0x640 [nouveau] nouveau_drm_device_init+0x97/0x9e0 [nouveau] ? srso_return_thunk+0x5/0x5f ? pci_update_current_state+0x72/0xb0 ? srso_return_thunk+0x5/0x5f nouveau_drm_probe+0x12c/0x280 [nouveau] ? srso_return_thunk+0x5/0x5f local_pci_probe+0x45/0xa0 pci_device_probe+0xc7/0x270 really_probe+0xe6/0x3a0 __driver_probe_device+0x87/0x160 driver_probe_device+0x1f/0xc0 __driver_attach+0xec/0x1f0 ? __pfx___driver_attach+0x10/0x10 bus_for_each_dev+0x88/0xd0 bus_add_driver+0x116/0x220 driver_register+0x59/0x100 ? __pfx_nouveau_drm_init+0x10/0x10 [nouveau] do_one_initcall+0x5b/0x320 do_init_module+0x60/0x250 init_module_from_file+0x86/0xc0 idempotent_init_module+0x120/0x2b0 __x64_sys_finit_module+0x5e/0xb0 do_syscall_64+0x83/0x160 ? srso_return_thunk+0x5/0x5f entry_SYSCALL_64_after_hwframe+0x71/0x79 RIP: 0033:0x7feeb5cc20cd Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 1b cd 0c 00 f7 d8 64 89 01 48 RSP: 002b:00007ffcf220b2c8 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 RAX: ffffffffffffffda RBX: 000055fdd2916aa0 RCX: 00007feeb5cc20cd RDX: 0000000000000000 RSI: 000055fdd29161e0 RDI: 0000000000000035 RBP: 00007ffcf220b380 R08: 00007feeb5d8fb20 R09: 00007ffcf220b310 R10: 000055fdd2909dc0 R11: 0000000000000246 R12: 000055fdd29161e0 R13: 0000000000020000 R14: 000055fdd29203e0 R15: 000055fdd2909d80 We hit this when trying to initialize firmware of type NVKM_FIRMWARE_IMG_DMA because we allocate our memory with dma_alloc_coherent, and DMA allocations can't be turned back into memory pages - which a scatterlist needs in order to map them. So, fix this by allocating the memory with vmalloc instead(). V2: * Fixup explanation as the prior one was bogus Signed-off-by: Lyude Paul Reviewed-by: Dave Airlie Cc: stable@vger.kernel.org Link: https://patchwork.freedesktop.org/patch/msgid/20240429182318.189668-1-lyude@redhat.com --- drivers/gpu/drm/nouveau/nvkm/core/firmware.c | 19 ++++++++++++------- 1 file changed, 12 insertions(+), 7 deletions(-) diff --git a/drivers/gpu/drm/nouveau/nvkm/core/firmware.c b/drivers/gpu/drm/nouveau/nvkm/core/firmware.c index adc60b25f8e6..141b0a513bf5 100644 --- a/drivers/gpu/drm/nouveau/nvkm/core/firmware.c +++ b/drivers/gpu/drm/nouveau/nvkm/core/firmware.c @@ -205,7 +205,9 @@ nvkm_firmware_dtor(struct nvkm_firmware *fw) break; case NVKM_FIRMWARE_IMG_DMA: nvkm_memory_unref(&memory); - dma_free_coherent(fw->device->dev, sg_dma_len(&fw->mem.sgl), fw->img, fw->phys); + dma_unmap_single(fw->device->dev, fw->phys, sg_dma_len(&fw->mem.sgl), + DMA_TO_DEVICE); + kfree(fw->img); break; case NVKM_FIRMWARE_IMG_SGT: nvkm_memory_unref(&memory); @@ -235,14 +237,17 @@ nvkm_firmware_ctor(const struct nvkm_firmware_func *func, const char *name, fw->img = kmemdup(src, fw->len, GFP_KERNEL); break; case NVKM_FIRMWARE_IMG_DMA: { - dma_addr_t addr; - len = ALIGN(fw->len, PAGE_SIZE); - fw->img = dma_alloc_coherent(fw->device->dev, len, &addr, GFP_KERNEL); - if (fw->img) { - memcpy(fw->img, src, fw->len); - fw->phys = addr; + fw->img = kmalloc(len, GFP_KERNEL); + if (!fw->img) + return -ENOMEM; + + memcpy(fw->img, src, fw->len); + fw->phys = dma_map_single(fw->device->dev, fw->img, len, DMA_TO_DEVICE); + if (dma_mapping_error(fw->device->dev, fw->phys)) { + kfree(fw->img); + return -EFAULT; } sg_init_one(&fw->mem.sgl, fw->img, len); -- cgit v1.2.3 From 6f572a80545773833f00c9a65e9242ab6fedb192 Mon Sep 17 00:00:00 2001 From: Lyude Paul Date: Mon, 29 Apr 2024 14:23:09 -0400 Subject: drm/nouveau/gsp: Use the sg allocator for level 2 of radix3 Currently we allocate all 3 levels of radix3 page tables using nvkm_gsp_mem_ctor(), which uses dma_alloc_coherent() for allocating all of the relevant memory. This can end up failing in scenarios where the system has very high memory fragmentation, and we can't find enough contiguous memory to allocate level 2 of the page table. Currently, this can result in runtime PM issues on systems where memory fragmentation is high - as we'll fail to allocate the page table for our suspend/resume buffer: kworker/10:2: page allocation failure: order:7, mode:0xcc0(GFP_KERNEL), nodemask=(null),cpuset=/,mems_allowed=0 CPU: 10 PID: 479809 Comm: kworker/10:2 Not tainted 6.8.6-201.ChopperV6.fc39.x86_64 #1 Hardware name: SLIMBOOK Executive/Executive, BIOS N.1.10GRU06 02/02/2024 Workqueue: pm pm_runtime_work Call Trace: dump_stack_lvl+0x64/0x80 warn_alloc+0x165/0x1e0 ? __alloc_pages_direct_compact+0xb3/0x2b0 __alloc_pages_slowpath.constprop.0+0xd7d/0xde0 __alloc_pages+0x32d/0x350 __dma_direct_alloc_pages.isra.0+0x16a/0x2b0 dma_direct_alloc+0x70/0x270 nvkm_gsp_radix3_sg+0x5e/0x130 [nouveau] r535_gsp_fini+0x1d4/0x350 [nouveau] nvkm_subdev_fini+0x67/0x150 [nouveau] nvkm_device_fini+0x95/0x1e0 [nouveau] nvkm_udevice_fini+0x53/0x70 [nouveau] nvkm_object_fini+0xb9/0x240 [nouveau] nvkm_object_fini+0x75/0x240 [nouveau] nouveau_do_suspend+0xf5/0x280 [nouveau] nouveau_pmops_runtime_suspend+0x3e/0xb0 [nouveau] pci_pm_runtime_suspend+0x67/0x1e0 ? __pfx_pci_pm_runtime_suspend+0x10/0x10 __rpm_callback+0x41/0x170 ? __pfx_pci_pm_runtime_suspend+0x10/0x10 rpm_callback+0x5d/0x70 ? __pfx_pci_pm_runtime_suspend+0x10/0x10 rpm_suspend+0x120/0x6a0 pm_runtime_work+0x98/0xb0 process_one_work+0x171/0x340 worker_thread+0x27b/0x3a0 ? __pfx_worker_thread+0x10/0x10 kthread+0xe5/0x120 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x31/0x50 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1b/0x30 Luckily, we don't actually need to allocate coherent memory for the page table thanks to being able to pass the GPU a radix3 page table for suspend/resume data. So, let's rewrite nvkm_gsp_radix3_sg() to use the sg allocator for level 2. We continue using coherent allocations for lvl0 and 1, since they only take a single page. V2: * Don't forget to actually jump to the next scatterlist when we reach the end of the scatterlist we're currently on when writing out the page table for level 2 Signed-off-by: Lyude Paul Cc: stable@vger.kernel.org Reviewed-by: Ben Skeggs Link: https://patchwork.freedesktop.org/patch/msgid/20240429182318.189668-2-lyude@redhat.com --- drivers/gpu/drm/nouveau/include/nvkm/subdev/gsp.h | 4 +- drivers/gpu/drm/nouveau/nvkm/subdev/gsp/r535.c | 77 +++++++++++++++-------- 2 files changed, 54 insertions(+), 27 deletions(-) diff --git a/drivers/gpu/drm/nouveau/include/nvkm/subdev/gsp.h b/drivers/gpu/drm/nouveau/include/nvkm/subdev/gsp.h index 6f5d376d8fcc..a11d16a16c3b 100644 --- a/drivers/gpu/drm/nouveau/include/nvkm/subdev/gsp.h +++ b/drivers/gpu/drm/nouveau/include/nvkm/subdev/gsp.h @@ -15,7 +15,9 @@ struct nvkm_gsp_mem { }; struct nvkm_gsp_radix3 { - struct nvkm_gsp_mem mem[3]; + struct nvkm_gsp_mem lvl0; + struct nvkm_gsp_mem lvl1; + struct sg_table lvl2; }; int nvkm_gsp_sg(struct nvkm_device *, u64 size, struct sg_table *); diff --git a/drivers/gpu/drm/nouveau/nvkm/subdev/gsp/r535.c b/drivers/gpu/drm/nouveau/nvkm/subdev/gsp/r535.c index 9858c1438aa7..abe41f7a3404 100644 --- a/drivers/gpu/drm/nouveau/nvkm/subdev/gsp/r535.c +++ b/drivers/gpu/drm/nouveau/nvkm/subdev/gsp/r535.c @@ -1624,7 +1624,7 @@ r535_gsp_wpr_meta_init(struct nvkm_gsp *gsp) meta->magic = GSP_FW_WPR_META_MAGIC; meta->revision = GSP_FW_WPR_META_REVISION; - meta->sysmemAddrOfRadix3Elf = gsp->radix3.mem[0].addr; + meta->sysmemAddrOfRadix3Elf = gsp->radix3.lvl0.addr; meta->sizeOfRadix3Elf = gsp->fb.wpr2.elf.size; meta->sysmemAddrOfBootloader = gsp->boot.fw.addr; @@ -1919,8 +1919,9 @@ nvkm_gsp_sg(struct nvkm_device *device, u64 size, struct sg_table *sgt) static void nvkm_gsp_radix3_dtor(struct nvkm_gsp *gsp, struct nvkm_gsp_radix3 *rx3) { - for (int i = ARRAY_SIZE(rx3->mem) - 1; i >= 0; i--) - nvkm_gsp_mem_dtor(gsp, &rx3->mem[i]); + nvkm_gsp_sg_free(gsp->subdev.device, &rx3->lvl2); + nvkm_gsp_mem_dtor(gsp, &rx3->lvl1); + nvkm_gsp_mem_dtor(gsp, &rx3->lvl0); } /** @@ -1960,36 +1961,60 @@ static int nvkm_gsp_radix3_sg(struct nvkm_gsp *gsp, struct sg_table *sgt, u64 size, struct nvkm_gsp_radix3 *rx3) { - u64 addr; + struct sg_dma_page_iter sg_dma_iter; + struct scatterlist *sg; + size_t bufsize; + u64 *pte; + int ret, i, page_idx = 0; - for (int i = ARRAY_SIZE(rx3->mem) - 1; i >= 0; i--) { - u64 *ptes; - size_t bufsize; - int ret, idx; + ret = nvkm_gsp_mem_ctor(gsp, GSP_PAGE_SIZE, &rx3->lvl0); + if (ret) + return ret; - bufsize = ALIGN((size / GSP_PAGE_SIZE) * sizeof(u64), GSP_PAGE_SIZE); - ret = nvkm_gsp_mem_ctor(gsp, bufsize, &rx3->mem[i]); - if (ret) - return ret; + ret = nvkm_gsp_mem_ctor(gsp, GSP_PAGE_SIZE, &rx3->lvl1); + if (ret) + goto lvl1_fail; - ptes = rx3->mem[i].data; - if (i == 2) { - struct scatterlist *sgl; + // Allocate level 2 + bufsize = ALIGN((size / GSP_PAGE_SIZE) * sizeof(u64), GSP_PAGE_SIZE); + ret = nvkm_gsp_sg(gsp->subdev.device, bufsize, &rx3->lvl2); + if (ret) + goto lvl2_fail; - for_each_sgtable_dma_sg(sgt, sgl, idx) { - for (int j = 0; j < sg_dma_len(sgl) / GSP_PAGE_SIZE; j++) - *ptes++ = sg_dma_address(sgl) + (GSP_PAGE_SIZE * j); - } - } else { - for (int j = 0; j < size / GSP_PAGE_SIZE; j++) - *ptes++ = addr + GSP_PAGE_SIZE * j; + // Write the bus address of level 1 to level 0 + pte = rx3->lvl0.data; + *pte = rx3->lvl1.addr; + + // Write the bus address of each page in level 2 to level 1 + pte = rx3->lvl1.data; + for_each_sgtable_dma_page(&rx3->lvl2, &sg_dma_iter, 0) + *pte++ = sg_page_iter_dma_address(&sg_dma_iter); + + // Finally, write the bus address of each page in sgt to level 2 + for_each_sgtable_sg(&rx3->lvl2, sg, i) { + void *sgl_end; + + pte = sg_virt(sg); + sgl_end = (void *)pte + sg->length; + + for_each_sgtable_dma_page(sgt, &sg_dma_iter, page_idx) { + *pte++ = sg_page_iter_dma_address(&sg_dma_iter); + page_idx++; + + // Go to the next scatterlist for level 2 if we've reached the end + if ((void *)pte >= sgl_end) + break; } + } - size = rx3->mem[i].size; - addr = rx3->mem[i].addr; + if (ret) { +lvl2_fail: + nvkm_gsp_mem_dtor(gsp, &rx3->lvl1); +lvl1_fail: + nvkm_gsp_mem_dtor(gsp, &rx3->lvl0); } - return 0; + return ret; } int @@ -2021,7 +2046,7 @@ r535_gsp_fini(struct nvkm_gsp *gsp, bool suspend) sr = gsp->sr.meta.data; sr->magic = GSP_FW_SR_META_MAGIC; sr->revision = GSP_FW_SR_META_REVISION; - sr->sysmemAddrOfSuspendResumeData = gsp->sr.radix3.mem[0].addr; + sr->sysmemAddrOfSuspendResumeData = gsp->sr.radix3.lvl0.addr; sr->sizeOfSuspendResumeData = len; mbox0 = lower_32_bits(gsp->sr.meta.addr); -- cgit v1.2.3 From a37ef7613c00f2d72c8fc08bd83fb6cc76926c8c Mon Sep 17 00:00:00 2001 From: Zack Rusin Date: Thu, 25 Apr 2024 15:27:48 -0400 Subject: drm/vmwgfx: Fix invalid reads in fence signaled events Correctly set the length of the drm_event to the size of the structure that's actually used. The length of the drm_event was set to the parent structure instead of to the drm_vmw_event_fence which is supposed to be read. drm_read uses the length parameter to copy the event to the user space thus resuling in oob reads. Signed-off-by: Zack Rusin Fixes: 8b7de6aa8468 ("vmwgfx: Rework fence event action") Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-23566 Cc: David Airlie CC: Daniel Vetter Cc: Zack Rusin Cc: Broadcom internal kernel review list Cc: dri-devel@lists.freedesktop.org Cc: linux-kernel@vger.kernel.org Cc: # v3.4+ Reviewed-by: Maaz Mombasawala Reviewed-by: Martin Krastev Link: https://patchwork.freedesktop.org/patch/msgid/20240425192748.1761522-1-zack.rusin@broadcom.com --- drivers/gpu/drm/vmwgfx/vmwgfx_fence.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_fence.c b/drivers/gpu/drm/vmwgfx/vmwgfx_fence.c index 2a0cda324703..5efc6a766f64 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_fence.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_fence.c @@ -991,7 +991,7 @@ static int vmw_event_fence_action_create(struct drm_file *file_priv, } event->event.base.type = DRM_VMW_EVENT_FENCE_SIGNALED; - event->event.base.length = sizeof(*event); + event->event.base.length = sizeof(event->event); event->event.user_data = user_data; ret = drm_event_reserve_init(dev, file_priv, &event->base, &event->event.base); -- cgit v1.2.3 From edc5a009ee3bdc2161e2c3e782a37805617790a3 Mon Sep 17 00:00:00 2001 From: RD Babiera Date: Tue, 23 Apr 2024 20:25:46 +0000 Subject: usb: typec: tcpm: queue correct sop type in tcpm_queue_vdm_unlocked tcpm_queue_vdm_unlocked queues VDMs over SOP regardless of input parameter tx_sop_type. Fix tcpm_queue_vdm() call. Fixes: 7e7877c55eb1 ("usb: typec: tcpm: add alt mode enter/exit/vdm support for sop'") Cc: stable@vger.kernel.org Signed-off-by: RD Babiera Reviewed-by: Heikki Krogerus Link: https://lore.kernel.org/r/20240423202546.3374218-2-rdbabiera@google.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/typec/tcpm/tcpm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/typec/tcpm/tcpm.c b/drivers/usb/typec/tcpm/tcpm.c index ab6ed6111ed0..99a039374f9c 100644 --- a/drivers/usb/typec/tcpm/tcpm.c +++ b/drivers/usb/typec/tcpm/tcpm.c @@ -1565,7 +1565,7 @@ static void tcpm_queue_vdm_unlocked(struct tcpm_port *port, const u32 header, const u32 *data, int cnt, enum tcpm_transmit_type tx_sop_type) { mutex_lock(&port->lock); - tcpm_queue_vdm(port, header, data, cnt, TCPC_TX_SOP); + tcpm_queue_vdm(port, header, data, cnt, tx_sop_type); mutex_unlock(&port->lock); } -- cgit v1.2.3 From bf20c69cf3cf9c6445c4925dd9a8a6ca1b78bfdf Mon Sep 17 00:00:00 2001 From: RD Babiera Date: Tue, 23 Apr 2024 20:27:16 +0000 Subject: usb: typec: tcpm: clear pd_event queue in PORT_RESET When a Fast Role Swap control message attempt results in a transition to ERROR_RECOVERY, the TCPC can still queue a TCPM_SOURCING_VBUS event. If the event is queued but processed after the tcpm_reset_port() call in the PORT_RESET state, then the following occurs: 1. tcpm_reset_port() calls tcpm_init_vbus() to reset the vbus sourcing and sinking state 2. tcpm_pd_event_handler() turns VBUS on before the port is in the default state. 3. The port resolves as a sink. In the SNK_DISCOVERY state, tcpm_set_charge() cannot set vbus to charge. Clear pd events within PORT_RESET to get rid of non-applicable events. Fixes: b17dd57118fe ("staging: typec: tcpm: Improve role swap with non PD capable partners") Cc: stable@vger.kernel.org Signed-off-by: RD Babiera Reviewed-by: Heikki Krogerus Link: https://lore.kernel.org/r/20240423202715.3375827-2-rdbabiera@google.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/typec/tcpm/tcpm.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/typec/tcpm/tcpm.c b/drivers/usb/typec/tcpm/tcpm.c index 99a039374f9c..a0e0ffd5a64b 100644 --- a/drivers/usb/typec/tcpm/tcpm.c +++ b/drivers/usb/typec/tcpm/tcpm.c @@ -5605,6 +5605,7 @@ static void run_state_machine(struct tcpm_port *port) break; case PORT_RESET: tcpm_reset_port(port); + port->pd_events = 0; if (port->self_powered) tcpm_set_cc(port, TYPEC_CC_OPEN); else -- cgit v1.2.3 From 230ecdf71a644c9c73e0e6735b33173074ae3f94 Mon Sep 17 00:00:00 2001 From: Amit Sunil Dhamne Date: Wed, 24 Apr 2024 15:32:16 -0700 Subject: usb: typec: tcpm: unregister existing source caps before re-registration Check and unregister existing source caps in tcpm_register_source_caps function before registering new ones. This change fixes following warning when port partner resends source caps after negotiating PD contract for the purpose of re-negotiation. [ 343.135030][ T151] sysfs: cannot create duplicate filename '/devices/virtual/usb_power_delivery/pd1/source-capabilities' [ 343.135071][ T151] Call trace: [ 343.135076][ T151] dump_backtrace+0xe8/0x108 [ 343.135099][ T151] show_stack+0x18/0x24 [ 343.135106][ T151] dump_stack_lvl+0x50/0x6c [ 343.135119][ T151] dump_stack+0x18/0x24 [ 343.135126][ T151] sysfs_create_dir_ns+0xe0/0x140 [ 343.135137][ T151] kobject_add_internal+0x228/0x424 [ 343.135146][ T151] kobject_add+0x94/0x10c [ 343.135152][ T151] device_add+0x1b0/0x4c0 [ 343.135187][ T151] device_register+0x20/0x34 [ 343.135195][ T151] usb_power_delivery_register_capabilities+0x90/0x20c [ 343.135209][ T151] tcpm_pd_rx_handler+0x9f0/0x15b8 [ 343.135216][ T151] kthread_worker_fn+0x11c/0x260 [ 343.135227][ T151] kthread+0x114/0x1bc [ 343.135235][ T151] ret_from_fork+0x10/0x20 [ 343.135265][ T151] kobject: kobject_add_internal failed for source-capabilities with -EEXIST, don't try to register things with the same name in the same directory. Fixes: 8203d26905ee ("usb: typec: tcpm: Register USB Power Delivery Capabilities") Cc: linux-usb@vger.kernel.org Cc: stable@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: Mark Brown Signed-off-by: Amit Sunil Dhamne Reviewed-by: Heikki Krogerus Link: https://lore.kernel.org/r/20240424223227.1807844-1-amitsd@google.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/typec/tcpm/tcpm.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/usb/typec/tcpm/tcpm.c b/drivers/usb/typec/tcpm/tcpm.c index a0e0ffd5a64b..77e632ea6872 100644 --- a/drivers/usb/typec/tcpm/tcpm.c +++ b/drivers/usb/typec/tcpm/tcpm.c @@ -2996,7 +2996,7 @@ static int tcpm_register_source_caps(struct tcpm_port *port) { struct usb_power_delivery_desc desc = { port->negotiated_rev }; struct usb_power_delivery_capabilities_desc caps = { }; - struct usb_power_delivery_capabilities *cap; + struct usb_power_delivery_capabilities *cap = port->partner_source_caps; if (!port->partner_pd) port->partner_pd = usb_power_delivery_register(NULL, &desc); @@ -3006,6 +3006,9 @@ static int tcpm_register_source_caps(struct tcpm_port *port) memcpy(caps.pdo, port->source_caps, sizeof(u32) * port->nr_source_caps); caps.role = TYPEC_SOURCE; + if (cap) + usb_power_delivery_unregister_capabilities(cap); + cap = usb_power_delivery_register_capabilities(port->partner_pd, &caps); if (IS_ERR(cap)) return PTR_ERR(cap); -- cgit v1.2.3 From cdc9946ea6377e8e214b135ccc308c5e514ba25f Mon Sep 17 00:00:00 2001 From: RD Babiera Date: Tue, 23 Apr 2024 20:23:57 +0000 Subject: usb: typec: tcpm: enforce ready state when queueing alt mode vdm Before sending Enter Mode for an Alt Mode, there is a gap between Discover Modes and the Alt Mode driver queueing the Enter Mode VDM for the port partner to send a message to the port. If this message results in unregistering Alt Modes such as in a DR_SWAP, then the following deadlock can occur with respect to the DisplayPort Alt Mode driver: 1. The DR_SWAP state holds port->lock. Unregistering the Alt Mode driver results in a cancel_work_sync() that waits for the current dp_altmode_work to finish. 2. dp_altmode_work makes a call to tcpm_altmode_enter. The deadlock occurs because tcpm_queue_vdm_unlock attempts to hold port->lock. Before attempting to grab the lock, ensure that the port is in a state vdm_run_state_machine can run in. Alt Mode unregistration will not occur in these states. Fixes: 03eafcfb60c0 ("usb: typec: tcpm: Add tcpm_queue_vdm_unlocked() helper") Cc: stable@vger.kernel.org Signed-off-by: RD Babiera Reviewed-by: Heikki Krogerus Link: https://lore.kernel.org/r/20240423202356.3372314-2-rdbabiera@google.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/typec/tcpm/tcpm.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/usb/typec/tcpm/tcpm.c b/drivers/usb/typec/tcpm/tcpm.c index 77e632ea6872..53c1f308ebd7 100644 --- a/drivers/usb/typec/tcpm/tcpm.c +++ b/drivers/usb/typec/tcpm/tcpm.c @@ -1564,6 +1564,10 @@ static void tcpm_queue_vdm(struct tcpm_port *port, const u32 header, static void tcpm_queue_vdm_unlocked(struct tcpm_port *port, const u32 header, const u32 *data, int cnt, enum tcpm_transmit_type tx_sop_type) { + if (port->state != SRC_READY && port->state != SNK_READY && + port->state != SRC_VDM_IDENTITY_REQUEST) + return; + mutex_lock(&port->lock); tcpm_queue_vdm(port, header, data, cnt, tx_sop_type); mutex_unlock(&port->lock); -- cgit v1.2.3 From ae11f04b452b5205536e1c02d31f8045eba249dd Mon Sep 17 00:00:00 2001 From: Badhri Jagan Sridharan Date: Sat, 27 Apr 2024 20:28:12 +0000 Subject: usb: typec: tcpm: Check for port partner validity before consuming it typec_register_partner() does not guarantee partner registration to always succeed. In the event of failure, port->partner is set to the error value or NULL. Given that port->partner validity is not checked, this results in the following crash: Unable to handle kernel NULL pointer dereference at virtual address xx pc : run_state_machine+0x1bc8/0x1c08 lr : run_state_machine+0x1b90/0x1c08 .. Call trace: run_state_machine+0x1bc8/0x1c08 tcpm_state_machine_work+0x94/0xe4 kthread_worker_fn+0x118/0x328 kthread+0x1d0/0x23c ret_from_fork+0x10/0x20 To prevent the crash, check for port->partner validity before derefencing it in all the call sites. Cc: stable@vger.kernel.org Fixes: c97cd0b4b54e ("usb: typec: tcpm: set initial svdm version based on pd revision") Signed-off-by: Badhri Jagan Sridharan Reviewed-by: Heikki Krogerus Reviewed-by: Dmitry Baryshkov Link: https://lore.kernel.org/r/20240427202812.3435268-1-badhri@google.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/typec/tcpm/tcpm.c | 30 +++++++++++++++++++++++------- 1 file changed, 23 insertions(+), 7 deletions(-) diff --git a/drivers/usb/typec/tcpm/tcpm.c b/drivers/usb/typec/tcpm/tcpm.c index 53c1f308ebd7..8a1af08f71b6 100644 --- a/drivers/usb/typec/tcpm/tcpm.c +++ b/drivers/usb/typec/tcpm/tcpm.c @@ -1584,7 +1584,8 @@ static void svdm_consume_identity(struct tcpm_port *port, const u32 *p, int cnt) port->partner_ident.cert_stat = p[VDO_INDEX_CSTAT]; port->partner_ident.product = product; - typec_partner_set_identity(port->partner); + if (port->partner) + typec_partner_set_identity(port->partner); tcpm_log(port, "Identity: %04x:%04x.%04x", PD_IDH_VID(vdo), @@ -1746,6 +1747,9 @@ static void tcpm_register_partner_altmodes(struct tcpm_port *port) struct typec_altmode *altmode; int i; + if (!port->partner) + return; + for (i = 0; i < modep->altmodes; i++) { altmode = typec_partner_register_altmode(port->partner, &modep->altmode_desc[i]); @@ -4238,7 +4242,10 @@ static int tcpm_init_vconn(struct tcpm_port *port) static void tcpm_typec_connect(struct tcpm_port *port) { + struct typec_partner *partner; + if (!port->connected) { + port->connected = true; /* Make sure we don't report stale identity information */ memset(&port->partner_ident, 0, sizeof(port->partner_ident)); port->partner_desc.usb_pd = port->pd_capable; @@ -4248,9 +4255,13 @@ static void tcpm_typec_connect(struct tcpm_port *port) port->partner_desc.accessory = TYPEC_ACCESSORY_AUDIO; else port->partner_desc.accessory = TYPEC_ACCESSORY_NONE; - port->partner = typec_register_partner(port->typec_port, - &port->partner_desc); - port->connected = true; + partner = typec_register_partner(port->typec_port, &port->partner_desc); + if (IS_ERR(partner)) { + dev_err(port->dev, "Failed to register partner (%ld)\n", PTR_ERR(partner)); + return; + } + + port->partner = partner; typec_partner_set_usb_power_delivery(port->partner, port->partner_pd); } } @@ -4330,9 +4341,11 @@ static void tcpm_typec_disconnect(struct tcpm_port *port) port->plug_prime = NULL; port->cable = NULL; if (port->connected) { - typec_partner_set_usb_power_delivery(port->partner, NULL); - typec_unregister_partner(port->partner); - port->partner = NULL; + if (port->partner) { + typec_partner_set_usb_power_delivery(port->partner, NULL); + typec_unregister_partner(port->partner); + port->partner = NULL; + } port->connected = false; } } @@ -4556,6 +4569,9 @@ static enum typec_cc_status tcpm_pwr_opmode_to_rp(enum typec_pwr_opmode opmode) static void tcpm_set_initial_svdm_version(struct tcpm_port *port) { + if (!port->partner) + return; + switch (port->negotiated_rev) { case PD_REV30: break; -- cgit v1.2.3 From 0537c8eef4f699aacdeb67c6181c66cccd63c7f5 Mon Sep 17 00:00:00 2001 From: Uwe Kleine-König Date: Tue, 30 Apr 2024 11:46:32 -0700 Subject: Input: amimouse - mark driver struct with __refdata to prevent section mismatch MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit As described in the added code comment, a reference to .exit.text is ok for drivers registered via module_platform_driver_probe(). Make this explicit to prevent the following section mismatch warning WARNING: modpost: drivers/input/mouse/amimouse: section mismatch in reference: amimouse_driver+0x8 (section: .data) -> amimouse_remove (section: .exit.text) that triggers on an allmodconfig W=1 build. Signed-off-by: Uwe Kleine-König Link: https://lore.kernel.org/r/2e3783106bf6bd9a7bdeb12b706378fb16316471.1711748999.git.u.kleine-koenig@pengutronix.de Signed-off-by: Dmitry Torokhov --- drivers/input/mouse/amimouse.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/drivers/input/mouse/amimouse.c b/drivers/input/mouse/amimouse.c index cda0c3ff5a28..2fbbaeb76d70 100644 --- a/drivers/input/mouse/amimouse.c +++ b/drivers/input/mouse/amimouse.c @@ -132,7 +132,13 @@ static void __exit amimouse_remove(struct platform_device *pdev) input_unregister_device(dev); } -static struct platform_driver amimouse_driver = { +/* + * amimouse_remove() lives in .exit.text. For drivers registered via + * module_platform_driver_probe() this is ok because they cannot get unbound at + * runtime. So mark the driver struct with __refdata to prevent modpost + * triggering a section mismatch warning. + */ +static struct platform_driver amimouse_driver __refdata = { .remove_new = __exit_p(amimouse_remove), .driver = { .name = "amiga-mouse", -- cgit v1.2.3 From aacb99de1099346244d488bdf7df489a44278574 Mon Sep 17 00:00:00 2001 From: Marek Szyprowski Date: Tue, 30 Apr 2024 20:46:56 +0200 Subject: clk: samsung: Revert "clk: Use device_get_match_data()" device_get_match_data() function should not be used on the device other than the one matched to the given driver, because it always returns the match_data of the matched driver. In case of exynos-clkout driver, the original code matches the OF IDs on the PARENT device, so replacing it with of_device_get_match_data() broke the driver. This has been already pointed once in commit 2bc5febd05ab ("clk: samsung: Revert "clk: samsung: exynos-clkout: Use of_device_get_match_data()""). To avoid further confusion, add a comment about this special case, which requires direct of_match_device() call to pass custom IDs array. This partially reverts commit 409c39ec92a35e3708f5b5798c78eae78512cd71. Cc: Fixes: 409c39ec92a3 ("clk: Use device_get_match_data()") Signed-off-by: Marek Szyprowski Link: https://lore.kernel.org/r/20240425075628.838497-1-m.szyprowski@samsung.com Signed-off-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20240430184656.357805-1-krzysztof.kozlowski@linaro.org Signed-off-by: Stephen Boyd --- drivers/clk/samsung/clk-exynos-clkout.c | 13 ++++++++++--- 1 file changed, 10 insertions(+), 3 deletions(-) diff --git a/drivers/clk/samsung/clk-exynos-clkout.c b/drivers/clk/samsung/clk-exynos-clkout.c index 3484e6cc80ad..503c6f5b20d5 100644 --- a/drivers/clk/samsung/clk-exynos-clkout.c +++ b/drivers/clk/samsung/clk-exynos-clkout.c @@ -13,9 +13,9 @@ #include #include #include +#include #include #include -#include #define EXYNOS_CLKOUT_NR_CLKS 1 #define EXYNOS_CLKOUT_PARENTS 32 @@ -84,17 +84,24 @@ MODULE_DEVICE_TABLE(of, exynos_clkout_ids); static int exynos_clkout_match_parent_dev(struct device *dev, u32 *mux_mask) { const struct exynos_clkout_variant *variant; + const struct of_device_id *match; if (!dev->parent) { dev_err(dev, "not instantiated from MFD\n"); return -EINVAL; } - variant = device_get_match_data(dev->parent); - if (!variant) { + /* + * 'exynos_clkout_ids' arrays is not the ids array matched by + * the dev->parent driver, so of_device_get_match_data() or + * device_get_match_data() cannot be used here. + */ + match = of_match_device(exynos_clkout_ids, dev->parent); + if (!match) { dev_err(dev, "cannot match parent device\n"); return -EINVAL; } + variant = match->data; *mux_mask = variant->mux_mask; -- cgit v1.2.3 From eaf4a9b19b9961f8ca294c39c5f8984a4cf42212 Mon Sep 17 00:00:00 2001 From: Uday Shankar Date: Tue, 30 Apr 2024 15:16:24 -0600 Subject: ublk: remove segment count and size limits ublk_drv currently creates block devices with the default max_segments and max_segment_size limits of BLK_MAX_SEGMENTS (128) and BLK_MAX_SEGMENT_SIZE (65536) respectively. These defaults can artificially constrain the I/O size seen by the ublk server - for example, suppose that the ublk server has configured itself to accept I/Os up to 1M and the application is also issuing 1M sized I/Os. If the I/O buffer used by the application is backed by 4K pages, the buffer could consist of up to 1M / 4K = 256 physically discontiguous segments (even if the buffer is virtually contiguous). As such, the I/O could exceed the default max_segments limit and get split. This can cause unnecessary performance issues if the ublk server is optimized to handle 1M I/Os. The block layer's segment count/size limits exist to model hardware constraints which don't exist in ublk_drv's case, so just remove those limits for the block devices created by ublk_drv. Signed-off-by: Uday Shankar Reviewed-by: Riley Thomasson Reviewed-by: Ming Lei Link: https://lore.kernel.org/r/20240430211623.2802036-1-ushankar@purestorage.com Signed-off-by: Jens Axboe --- drivers/block/ublk_drv.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/block/ublk_drv.c b/drivers/block/ublk_drv.c index bea3d5cf8a83..374e4efa8759 100644 --- a/drivers/block/ublk_drv.c +++ b/drivers/block/ublk_drv.c @@ -2177,7 +2177,8 @@ static int ublk_ctrl_start_dev(struct ublk_device *ub, struct io_uring_cmd *cmd) .max_hw_sectors = p->max_sectors, .chunk_sectors = p->chunk_sectors, .virt_boundary_mask = p->virt_boundary_mask, - + .max_segments = USHRT_MAX, + .max_segment_size = UINT_MAX, }; struct gendisk *disk; int ret = -EINVAL; -- cgit v1.2.3 From f06446ef23216090d1ee8ede1a7d7ae430c22dcc Mon Sep 17 00:00:00 2001 From: Mukul Joshi Date: Tue, 23 Apr 2024 14:40:37 -0400 Subject: drm/amdgpu: Fix VRAM memory accounting Subtract the VRAM pinned memory when checking for available memory in amdgpu_amdkfd_reserve_mem_limit function since that memory is not available for use. Signed-off-by: Mukul Joshi Reviewed-by: Felix Kuehling Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c index 2131de36e3da..e4d4e55c08ad 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c @@ -220,7 +220,7 @@ int amdgpu_amdkfd_reserve_mem_limit(struct amdgpu_device *adev, (kfd_mem_limit.ttm_mem_used + ttm_mem_needed > kfd_mem_limit.max_ttm_mem_limit) || (adev && xcp_id >= 0 && adev->kfd.vram_used[xcp_id] + vram_needed > - vram_size - reserved_for_pt)) { + vram_size - reserved_for_pt - atomic64_read(&adev->vram_pin_size))) { ret = -ENOMEM; goto release; } -- cgit v1.2.3 From 719564737a9ac3d0b49c314450b56cf6f7d71358 Mon Sep 17 00:00:00 2001 From: George Shen Date: Thu, 16 Sep 2021 19:55:39 -0400 Subject: drm/amd/display: Handle Y carry-over in VCP X.Y calculation Theoretically rare corner case where ceil(Y) results in rounding up to an integer. If this happens, the 1 should be carried over to the X value. CC: stable@vger.kernel.org Reviewed-by: Rodrigo Siqueira Signed-off-by: George Shen Tested-by: Daniel Wheeler Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/dc/dcn31/dcn31_hpo_dp_link_encoder.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_hpo_dp_link_encoder.c b/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_hpo_dp_link_encoder.c index 5b7ad38f85e0..65e45a0b4ff3 100644 --- a/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_hpo_dp_link_encoder.c +++ b/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_hpo_dp_link_encoder.c @@ -395,6 +395,12 @@ void dcn31_hpo_dp_link_enc_set_throttled_vcp_size( x), 25)); + // If y rounds up to integer, carry it over to x. + if (y >> 25) { + x += 1; + y = 0; + } + switch (stream_encoder_inst) { case 0: REG_SET_2(DP_DPHY_SYM32_VC_RATE_CNTL0, 0, -- cgit v1.2.3 From be53bd4f00aa4c7db9f41116224c027b4cfce8e3 Mon Sep 17 00:00:00 2001 From: Rodrigo Siqueira Date: Thu, 11 Apr 2024 17:38:08 -0600 Subject: drm/amd/display: Ensure that dmcub support flag is set for DCN20 In the DCN20 resource initialization, ensure that DMCUB support starts configured as true. Signed-off-by: Rodrigo Siqueira Acked-by: Aurabindo Pillai Tested-by: Daniel Wheeler Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/dc/resource/dcn20/dcn20_resource.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpu/drm/amd/display/dc/resource/dcn20/dcn20_resource.c b/drivers/gpu/drm/amd/display/dc/resource/dcn20/dcn20_resource.c index a2387cea1af9..622214b365a2 100644 --- a/drivers/gpu/drm/amd/display/dc/resource/dcn20/dcn20_resource.c +++ b/drivers/gpu/drm/amd/display/dc/resource/dcn20/dcn20_resource.c @@ -2449,6 +2449,7 @@ static bool dcn20_resource_construct( dc->caps.post_blend_color_processing = true; dc->caps.force_dp_tps4_for_cp2520 = true; dc->caps.extended_aux_timeout_support = true; + dc->caps.dmcub_support = true; /* Color pipeline capabilities */ dc->caps.color.dpp.dcn_arch = 1; -- cgit v1.2.3 From a01b64f31d65bdc917d1afb4cec9915beb6931be Mon Sep 17 00:00:00 2001 From: Swapnil Patel Date: Tue, 2 Apr 2024 21:07:46 -0400 Subject: drm/amd/display: Add dtbclk access to dcn315 [Why & How] Currently DCN315 clk manager is missing code to enable/disable dtbclk. Because of this, "optimized_required" flag is constantly set and this prevents FreeSync from engaging for certain high bandwidth display Modes which require DTBCLK. Reviewed-by: Dmytro Laktyushkin Acked-by: Aurabindo Pillai Signed-off-by: Swapnil Patel Tested-by: Daniel Wheeler Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/dc/clk_mgr/dcn315/dcn315_clk_mgr.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn315/dcn315_clk_mgr.c b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn315/dcn315_clk_mgr.c index 644da4637320..5506cf9b3672 100644 --- a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn315/dcn315_clk_mgr.c +++ b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn315/dcn315_clk_mgr.c @@ -145,6 +145,10 @@ static void dcn315_update_clocks(struct clk_mgr *clk_mgr_base, */ clk_mgr_base->clks.zstate_support = new_clocks->zstate_support; if (safe_to_lower) { + if (clk_mgr_base->clks.dtbclk_en && !new_clocks->dtbclk_en) { + dcn315_smu_set_dtbclk(clk_mgr, false); + clk_mgr_base->clks.dtbclk_en = new_clocks->dtbclk_en; + } /* check that we're not already in lower */ if (clk_mgr_base->clks.pwr_state != DCN_PWR_STATE_LOW_POWER) { display_count = dcn315_get_active_display_cnt_wa(dc, context); @@ -160,6 +164,10 @@ static void dcn315_update_clocks(struct clk_mgr *clk_mgr_base, } } } else { + if (!clk_mgr_base->clks.dtbclk_en && new_clocks->dtbclk_en) { + dcn315_smu_set_dtbclk(clk_mgr, true); + clk_mgr_base->clks.dtbclk_en = new_clocks->dtbclk_en; + } /* check that we're not already in D0 */ if (clk_mgr_base->clks.pwr_state != DCN_PWR_STATE_MISSION_MODE) { union display_idle_optimization_u idle_info = { 0 }; -- cgit v1.2.3 From 9a35d205f466501dcfe5625ca313d944d0ac2d60 Mon Sep 17 00:00:00 2001 From: Gabe Teeger Date: Tue, 9 Apr 2024 10:38:58 -0400 Subject: drm/amd/display: Atom Integrated System Info v2_2 for DCN35 New request from KMD/VBIOS in order to support new UMA carveout model. This fixes a null dereference from accessing Ctx->dc_bios->integrated_info while it was NULL. DAL parses through the BIOS and extracts the necessary integrated_info but was missing a case for the new BIOS version 2.3. Reviewed-by: Nicholas Kazlauskas Acked-by: Aurabindo Pillai Signed-off-by: Gabe Teeger Tested-by: Daniel Wheeler Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/dc/bios/bios_parser2.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpu/drm/amd/display/dc/bios/bios_parser2.c b/drivers/gpu/drm/amd/display/dc/bios/bios_parser2.c index 05f392501c0a..ab31643b1096 100644 --- a/drivers/gpu/drm/amd/display/dc/bios/bios_parser2.c +++ b/drivers/gpu/drm/amd/display/dc/bios/bios_parser2.c @@ -2948,6 +2948,7 @@ static enum bp_result construct_integrated_info( result = get_integrated_info_v2_1(bp, info); break; case 2: + case 3: result = get_integrated_info_v2_2(bp, info); break; default: -- cgit v1.2.3 From 892b41b16f6163e6556545835abba668fcab4eea Mon Sep 17 00:00:00 2001 From: Hersen Wu Date: Tue, 13 Feb 2024 14:26:06 -0500 Subject: drm/amd/display: Fix incorrect DSC instance for MST [Why] DSC debugfs, such as dp_dsc_clock_en_read, use aconnector->dc_link to find pipe_ctx for display. Displays connected to MST hub share the same dc_link. DSC instance is from pipe_ctx. This causes incorrect DSC instance for display connected to MST hub. [How] Add aconnector->sink check to find pipe_ctx. CC: stable@vger.kernel.org Reviewed-by: Aurabindo Pillai Signed-off-by: Hersen Wu Tested-by: Daniel Wheeler Signed-off-by: Alex Deucher --- .../drm/amd/display/amdgpu_dm/amdgpu_dm_debugfs.c | 48 ++++++++++++++++------ 1 file changed, 36 insertions(+), 12 deletions(-) diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_debugfs.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_debugfs.c index eee4945653e2..c7715a17f388 100644 --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_debugfs.c +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_debugfs.c @@ -1495,7 +1495,9 @@ static ssize_t dp_dsc_clock_en_read(struct file *f, char __user *buf, for (i = 0; i < MAX_PIPES; i++) { pipe_ctx = &aconnector->dc_link->dc->current_state->res_ctx.pipe_ctx[i]; if (pipe_ctx->stream && - pipe_ctx->stream->link == aconnector->dc_link) + pipe_ctx->stream->link == aconnector->dc_link && + pipe_ctx->stream->sink && + pipe_ctx->stream->sink == aconnector->dc_sink) break; } @@ -1596,7 +1598,9 @@ static ssize_t dp_dsc_clock_en_write(struct file *f, const char __user *buf, for (i = 0; i < MAX_PIPES; i++) { pipe_ctx = &aconnector->dc_link->dc->current_state->res_ctx.pipe_ctx[i]; if (pipe_ctx->stream && - pipe_ctx->stream->link == aconnector->dc_link) + pipe_ctx->stream->link == aconnector->dc_link && + pipe_ctx->stream->sink && + pipe_ctx->stream->sink == aconnector->dc_sink) break; } @@ -1681,7 +1685,9 @@ static ssize_t dp_dsc_slice_width_read(struct file *f, char __user *buf, for (i = 0; i < MAX_PIPES; i++) { pipe_ctx = &aconnector->dc_link->dc->current_state->res_ctx.pipe_ctx[i]; if (pipe_ctx->stream && - pipe_ctx->stream->link == aconnector->dc_link) + pipe_ctx->stream->link == aconnector->dc_link && + pipe_ctx->stream->sink && + pipe_ctx->stream->sink == aconnector->dc_sink) break; } @@ -1780,7 +1786,9 @@ static ssize_t dp_dsc_slice_width_write(struct file *f, const char __user *buf, for (i = 0; i < MAX_PIPES; i++) { pipe_ctx = &aconnector->dc_link->dc->current_state->res_ctx.pipe_ctx[i]; if (pipe_ctx->stream && - pipe_ctx->stream->link == aconnector->dc_link) + pipe_ctx->stream->link == aconnector->dc_link && + pipe_ctx->stream->sink && + pipe_ctx->stream->sink == aconnector->dc_sink) break; } @@ -1865,7 +1873,9 @@ static ssize_t dp_dsc_slice_height_read(struct file *f, char __user *buf, for (i = 0; i < MAX_PIPES; i++) { pipe_ctx = &aconnector->dc_link->dc->current_state->res_ctx.pipe_ctx[i]; if (pipe_ctx->stream && - pipe_ctx->stream->link == aconnector->dc_link) + pipe_ctx->stream->link == aconnector->dc_link && + pipe_ctx->stream->sink && + pipe_ctx->stream->sink == aconnector->dc_sink) break; } @@ -1964,7 +1974,9 @@ static ssize_t dp_dsc_slice_height_write(struct file *f, const char __user *buf, for (i = 0; i < MAX_PIPES; i++) { pipe_ctx = &aconnector->dc_link->dc->current_state->res_ctx.pipe_ctx[i]; if (pipe_ctx->stream && - pipe_ctx->stream->link == aconnector->dc_link) + pipe_ctx->stream->link == aconnector->dc_link && + pipe_ctx->stream->sink && + pipe_ctx->stream->sink == aconnector->dc_sink) break; } @@ -2045,7 +2057,9 @@ static ssize_t dp_dsc_bits_per_pixel_read(struct file *f, char __user *buf, for (i = 0; i < MAX_PIPES; i++) { pipe_ctx = &aconnector->dc_link->dc->current_state->res_ctx.pipe_ctx[i]; if (pipe_ctx->stream && - pipe_ctx->stream->link == aconnector->dc_link) + pipe_ctx->stream->link == aconnector->dc_link && + pipe_ctx->stream->sink && + pipe_ctx->stream->sink == aconnector->dc_sink) break; } @@ -2141,7 +2155,9 @@ static ssize_t dp_dsc_bits_per_pixel_write(struct file *f, const char __user *bu for (i = 0; i < MAX_PIPES; i++) { pipe_ctx = &aconnector->dc_link->dc->current_state->res_ctx.pipe_ctx[i]; if (pipe_ctx->stream && - pipe_ctx->stream->link == aconnector->dc_link) + pipe_ctx->stream->link == aconnector->dc_link && + pipe_ctx->stream->sink && + pipe_ctx->stream->sink == aconnector->dc_sink) break; } @@ -2220,7 +2236,9 @@ static ssize_t dp_dsc_pic_width_read(struct file *f, char __user *buf, for (i = 0; i < MAX_PIPES; i++) { pipe_ctx = &aconnector->dc_link->dc->current_state->res_ctx.pipe_ctx[i]; if (pipe_ctx->stream && - pipe_ctx->stream->link == aconnector->dc_link) + pipe_ctx->stream->link == aconnector->dc_link && + pipe_ctx->stream->sink && + pipe_ctx->stream->sink == aconnector->dc_sink) break; } @@ -2276,7 +2294,9 @@ static ssize_t dp_dsc_pic_height_read(struct file *f, char __user *buf, for (i = 0; i < MAX_PIPES; i++) { pipe_ctx = &aconnector->dc_link->dc->current_state->res_ctx.pipe_ctx[i]; if (pipe_ctx->stream && - pipe_ctx->stream->link == aconnector->dc_link) + pipe_ctx->stream->link == aconnector->dc_link && + pipe_ctx->stream->sink && + pipe_ctx->stream->sink == aconnector->dc_sink) break; } @@ -2347,7 +2367,9 @@ static ssize_t dp_dsc_chunk_size_read(struct file *f, char __user *buf, for (i = 0; i < MAX_PIPES; i++) { pipe_ctx = &aconnector->dc_link->dc->current_state->res_ctx.pipe_ctx[i]; if (pipe_ctx->stream && - pipe_ctx->stream->link == aconnector->dc_link) + pipe_ctx->stream->link == aconnector->dc_link && + pipe_ctx->stream->sink && + pipe_ctx->stream->sink == aconnector->dc_sink) break; } @@ -2418,7 +2440,9 @@ static ssize_t dp_dsc_slice_bpg_offset_read(struct file *f, char __user *buf, for (i = 0; i < MAX_PIPES; i++) { pipe_ctx = &aconnector->dc_link->dc->current_state->res_ctx.pipe_ctx[i]; if (pipe_ctx->stream && - pipe_ctx->stream->link == aconnector->dc_link) + pipe_ctx->stream->link == aconnector->dc_link && + pipe_ctx->stream->sink && + pipe_ctx->stream->sink == aconnector->dc_sink) break; } -- cgit v1.2.3 From 46fe9cb1a9e62f4e6229f48ae303ef8e6c1fdc64 Mon Sep 17 00:00:00 2001 From: Meenakshikumar Somasundaram Date: Wed, 10 Apr 2024 10:46:35 -0400 Subject: drm/amd/display: Allocate zero bw after bw alloc enable [Why] During DP tunnel creation, CM preallocates BW and reduces estimated BW of other DPIA. CM release preallocation only when allocation is complete. Display mode validation logic validates timings based on bw available per host router. In multi display setup, this causes bw allocation failure when allocation greater than estimated bw. [How] Do zero alloc to make the CM to release preallocation and update estimated BW correctly for all DPIAs per host router. Reviewed-by: PeiChen Huang Acked-by: Aurabindo Pillai Signed-off-by: Meenakshikumar Somasundaram Tested-by: Daniel Wheeler Signed-off-by: Alex Deucher --- .../gpu/drm/amd/display/dc/link/protocols/link_dp_dpia_bw.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/amd/display/dc/link/protocols/link_dp_dpia_bw.c b/drivers/gpu/drm/amd/display/dc/link/protocols/link_dp_dpia_bw.c index 5491b707cec8..5a965c26bf20 100644 --- a/drivers/gpu/drm/amd/display/dc/link/protocols/link_dp_dpia_bw.c +++ b/drivers/gpu/drm/amd/display/dc/link/protocols/link_dp_dpia_bw.c @@ -270,7 +270,7 @@ static void set_usb4_req_bw_req(struct dc_link *link, int req_bw) /* Error check whether requested and allocated are equal */ req_bw = requested_bw * (Kbps_TO_Gbps / link->dpia_bw_alloc_config.bw_granularity); - if (req_bw == link->dpia_bw_alloc_config.allocated_bw) { + if (req_bw && (req_bw == link->dpia_bw_alloc_config.allocated_bw)) { DC_LOG_ERROR("%s: Request bw equals to allocated bw for link(%d)\n", __func__, link->link_index); } @@ -341,6 +341,14 @@ bool link_dp_dpia_set_dptx_usb4_bw_alloc_support(struct dc_link *link) ret = true; init_usb4_bw_struct(link); link->dpia_bw_alloc_config.bw_alloc_enabled = true; + + /* + * During DP tunnel creation, CM preallocates BW and reduces estimated BW of other + * DPIA. CM release preallocation only when allocation is complete. Do zero alloc + * to make the CM to release preallocation and update estimated BW correctly for + * all DPIAs per host router + */ + link_dp_dpia_allocate_usb4_bandwidth_for_stream(link, 0); } } -- cgit v1.2.3 From d3a9331a6591e9df64791e076f6591f440af51c3 Mon Sep 17 00:00:00 2001 From: Christian König Date: Thu, 21 Mar 2024 11:32:02 +0100 Subject: drm/amdgpu: once more fix the call oder in amdgpu_ttm_move() v2 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This reverts drm/amdgpu: fix ftrace event amdgpu_bo_move always move on same heap. The basic problem here is that after the move the old location is simply not available any more. Some fixes were suggested, but essentially we should call the move notification before actually moving things because only this way we have the correct order for DMA-buf and VM move notifications as well. Also rework the statistic handling so that we don't update the eviction counter before the move. v2: add missing NULL check Signed-off-by: Christian König Fixes: 94aeb4117343 ("drm/amdgpu: fix ftrace event amdgpu_bo_move always move on same heap") Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3171 Reviewed-by: Alex Deucher Signed-off-by: Alex Deucher CC: stable@vger.kernel.org --- drivers/gpu/drm/amd/amdgpu/amdgpu_object.c | 14 +++++---- drivers/gpu/drm/amd/amdgpu/amdgpu_object.h | 4 ++- drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c | 48 ++++++++++++++++-------------- 3 files changed, 38 insertions(+), 28 deletions(-) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_object.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_object.c index ce733e3cb35d..f6d503432a9e 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_object.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_object.c @@ -1243,14 +1243,18 @@ int amdgpu_bo_get_metadata(struct amdgpu_bo *bo, void *buffer, * amdgpu_bo_move_notify - notification about a memory move * @bo: pointer to a buffer object * @evict: if this move is evicting the buffer from the graphics address space + * @new_mem: new resource for backing the BO * * Marks the corresponding &amdgpu_bo buffer object as invalid, also performs * bookkeeping. * TTM driver callback which is called when ttm moves a buffer. */ -void amdgpu_bo_move_notify(struct ttm_buffer_object *bo, bool evict) +void amdgpu_bo_move_notify(struct ttm_buffer_object *bo, + bool evict, + struct ttm_resource *new_mem) { struct amdgpu_device *adev = amdgpu_ttm_adev(bo->bdev); + struct ttm_resource *old_mem = bo->resource; struct amdgpu_bo *abo; if (!amdgpu_bo_is_amdgpu_bo(bo)) @@ -1262,12 +1266,12 @@ void amdgpu_bo_move_notify(struct ttm_buffer_object *bo, bool evict) amdgpu_bo_kunmap(abo); if (abo->tbo.base.dma_buf && !abo->tbo.base.import_attach && - bo->resource->mem_type != TTM_PL_SYSTEM) + old_mem && old_mem->mem_type != TTM_PL_SYSTEM) dma_buf_move_notify(abo->tbo.base.dma_buf); - /* remember the eviction */ - if (evict) - atomic64_inc(&adev->num_evictions); + /* move_notify is called before move happens */ + trace_amdgpu_bo_move(abo, new_mem ? new_mem->mem_type : -1, + old_mem ? old_mem->mem_type : -1); } void amdgpu_bo_get_memory(struct amdgpu_bo *bo, diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_object.h b/drivers/gpu/drm/amd/amdgpu/amdgpu_object.h index fa03d9e4874c..bc42ccbde659 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_object.h +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_object.h @@ -328,7 +328,9 @@ int amdgpu_bo_set_metadata (struct amdgpu_bo *bo, void *metadata, int amdgpu_bo_get_metadata(struct amdgpu_bo *bo, void *buffer, size_t buffer_size, uint32_t *metadata_size, uint64_t *flags); -void amdgpu_bo_move_notify(struct ttm_buffer_object *bo, bool evict); +void amdgpu_bo_move_notify(struct ttm_buffer_object *bo, + bool evict, + struct ttm_resource *new_mem); void amdgpu_bo_release_notify(struct ttm_buffer_object *bo); vm_fault_t amdgpu_bo_fault_reserve_notify(struct ttm_buffer_object *bo); void amdgpu_bo_fence(struct amdgpu_bo *bo, struct dma_fence *fence, diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c index 1d71729e3f6b..4ffee5545265 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c @@ -481,14 +481,16 @@ static int amdgpu_bo_move(struct ttm_buffer_object *bo, bool evict, if (!old_mem || (old_mem->mem_type == TTM_PL_SYSTEM && bo->ttm == NULL)) { + amdgpu_bo_move_notify(bo, evict, new_mem); ttm_bo_move_null(bo, new_mem); - goto out; + return 0; } if (old_mem->mem_type == TTM_PL_SYSTEM && (new_mem->mem_type == TTM_PL_TT || new_mem->mem_type == AMDGPU_PL_PREEMPT)) { + amdgpu_bo_move_notify(bo, evict, new_mem); ttm_bo_move_null(bo, new_mem); - goto out; + return 0; } if ((old_mem->mem_type == TTM_PL_TT || old_mem->mem_type == AMDGPU_PL_PREEMPT) && @@ -498,9 +500,10 @@ static int amdgpu_bo_move(struct ttm_buffer_object *bo, bool evict, return r; amdgpu_ttm_backend_unbind(bo->bdev, bo->ttm); + amdgpu_bo_move_notify(bo, evict, new_mem); ttm_resource_free(bo, &bo->resource); ttm_bo_assign_mem(bo, new_mem); - goto out; + return 0; } if (old_mem->mem_type == AMDGPU_PL_GDS || @@ -512,8 +515,9 @@ static int amdgpu_bo_move(struct ttm_buffer_object *bo, bool evict, new_mem->mem_type == AMDGPU_PL_OA || new_mem->mem_type == AMDGPU_PL_DOORBELL) { /* Nothing to save here */ + amdgpu_bo_move_notify(bo, evict, new_mem); ttm_bo_move_null(bo, new_mem); - goto out; + return 0; } if (bo->type == ttm_bo_type_device && @@ -525,22 +529,23 @@ static int amdgpu_bo_move(struct ttm_buffer_object *bo, bool evict, abo->flags &= ~AMDGPU_GEM_CREATE_CPU_ACCESS_REQUIRED; } - if (adev->mman.buffer_funcs_enabled) { - if (((old_mem->mem_type == TTM_PL_SYSTEM && - new_mem->mem_type == TTM_PL_VRAM) || - (old_mem->mem_type == TTM_PL_VRAM && - new_mem->mem_type == TTM_PL_SYSTEM))) { - hop->fpfn = 0; - hop->lpfn = 0; - hop->mem_type = TTM_PL_TT; - hop->flags = TTM_PL_FLAG_TEMPORARY; - return -EMULTIHOP; - } + if (adev->mman.buffer_funcs_enabled && + ((old_mem->mem_type == TTM_PL_SYSTEM && + new_mem->mem_type == TTM_PL_VRAM) || + (old_mem->mem_type == TTM_PL_VRAM && + new_mem->mem_type == TTM_PL_SYSTEM))) { + hop->fpfn = 0; + hop->lpfn = 0; + hop->mem_type = TTM_PL_TT; + hop->flags = TTM_PL_FLAG_TEMPORARY; + return -EMULTIHOP; + } + amdgpu_bo_move_notify(bo, evict, new_mem); + if (adev->mman.buffer_funcs_enabled) r = amdgpu_move_blit(bo, evict, new_mem, old_mem); - } else { + else r = -ENODEV; - } if (r) { /* Check that all memory is CPU accessible */ @@ -555,11 +560,10 @@ static int amdgpu_bo_move(struct ttm_buffer_object *bo, bool evict, return r; } - trace_amdgpu_bo_move(abo, new_mem->mem_type, old_mem->mem_type); -out: - /* update statistics */ + /* update statistics after the move */ + if (evict) + atomic64_inc(&adev->num_evictions); atomic64_add(bo->base.size, &adev->num_bytes_moved); - amdgpu_bo_move_notify(bo, evict); return 0; } @@ -1559,7 +1563,7 @@ static int amdgpu_ttm_access_memory(struct ttm_buffer_object *bo, static void amdgpu_bo_delete_mem_notify(struct ttm_buffer_object *bo) { - amdgpu_bo_move_notify(bo, false); + amdgpu_bo_move_notify(bo, false, NULL); } static struct ttm_device_funcs amdgpu_bo_driver = { -- cgit v1.2.3 From 0e62103bdcbc88281e16add299a946fb3bd02fbe Mon Sep 17 00:00:00 2001 From: Rodrigo Siqueira Date: Thu, 18 Apr 2024 11:19:03 -0600 Subject: drm/amd/display: Add VCO speed parameter for DCN31 FPU Add VCO speed parameters in the bounding box array. Acked-by: Wayne Lin Signed-off-by: Rodrigo Siqueira Tested-by: Daniel Wheeler Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/dc/dml/dcn31/dcn31_fpu.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/gpu/drm/amd/display/dc/dml/dcn31/dcn31_fpu.c b/drivers/gpu/drm/amd/display/dc/dml/dcn31/dcn31_fpu.c index deb6d162a2d5..7307b7b8d8ad 100644 --- a/drivers/gpu/drm/amd/display/dc/dml/dcn31/dcn31_fpu.c +++ b/drivers/gpu/drm/amd/display/dc/dml/dcn31/dcn31_fpu.c @@ -291,6 +291,7 @@ static struct _vcs_dpi_soc_bounding_box_st dcn3_15_soc = { .do_urgent_latency_adjustment = false, .urgent_latency_adjustment_fabric_clock_component_us = 0, .urgent_latency_adjustment_fabric_clock_reference_mhz = 0, + .dispclk_dppclk_vco_speed_mhz = 2400.0, .num_chans = 4, .dummy_pstate_latency_us = 10.0 }; @@ -438,6 +439,7 @@ static struct _vcs_dpi_soc_bounding_box_st dcn3_16_soc = { .do_urgent_latency_adjustment = false, .urgent_latency_adjustment_fabric_clock_component_us = 0, .urgent_latency_adjustment_fabric_clock_reference_mhz = 0, + .dispclk_dppclk_vco_speed_mhz = 2500.0, }; void dcn31_zero_pipe_dcc_fraction(display_e2e_pipe_params_st *pipes, -- cgit v1.2.3 From ce649bd2d834db83ecc2756a362c9a1ec61658a5 Mon Sep 17 00:00:00 2001 From: Leo Ma Date: Thu, 11 Apr 2024 17:17:04 -0400 Subject: drm/amd/display: Fix DC mode screen flickering on DCN321 [Why && How] Screen flickering saw on 4K@60 eDP with high refresh rate external monitor when booting up in DC mode. DC Mode Capping is disabled which caused wrong UCLK being used. Reviewed-by: Alvin Lee Acked-by: Wayne Lin Signed-off-by: Leo Ma Tested-by: Daniel Wheeler Signed-off-by: Alex Deucher --- .../gpu/drm/amd/display/dc/clk_mgr/dcn32/dcn32_clk_mgr.c | 15 ++++++++++++--- 1 file changed, 12 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn32/dcn32_clk_mgr.c b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn32/dcn32_clk_mgr.c index bec252e1dd27..e506e4f969ca 100644 --- a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn32/dcn32_clk_mgr.c +++ b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn32/dcn32_clk_mgr.c @@ -712,8 +712,12 @@ static void dcn32_update_clocks(struct clk_mgr *clk_mgr_base, * since we calculate mode support based on softmax being the max UCLK * frequency. */ - dcn32_smu_set_hard_min_by_freq(clk_mgr, PPCLK_UCLK, - dc->clk_mgr->bw_params->dc_mode_softmax_memclk); + if (dc->debug.disable_dc_mode_overwrite) { + dcn30_smu_set_hard_max_by_freq(clk_mgr, PPCLK_UCLK, dc->clk_mgr->bw_params->max_memclk_mhz); + dcn32_smu_set_hard_min_by_freq(clk_mgr, PPCLK_UCLK, dc->clk_mgr->bw_params->max_memclk_mhz); + } else + dcn32_smu_set_hard_min_by_freq(clk_mgr, PPCLK_UCLK, + dc->clk_mgr->bw_params->dc_mode_softmax_memclk); } else { dcn32_smu_set_hard_min_by_freq(clk_mgr, PPCLK_UCLK, dc->clk_mgr->bw_params->max_memclk_mhz); } @@ -746,8 +750,13 @@ static void dcn32_update_clocks(struct clk_mgr *clk_mgr_base, /* set UCLK to requested value if P-State switching is supported, or to re-enable P-State switching */ if (clk_mgr_base->clks.p_state_change_support && (update_uclk || !clk_mgr_base->clks.prev_p_state_change_support) && - !dc->work_arounds.clock_update_disable_mask.uclk) + !dc->work_arounds.clock_update_disable_mask.uclk) { + if (dc->clk_mgr->dc_mode_softmax_enabled && dc->debug.disable_dc_mode_overwrite) + dcn30_smu_set_hard_max_by_freq(clk_mgr, PPCLK_UCLK, + max((int)dc->clk_mgr->bw_params->dc_mode_softmax_memclk, khz_to_mhz_ceil(clk_mgr_base->clks.dramclk_khz))); + dcn32_smu_set_hard_min_by_freq(clk_mgr, PPCLK_UCLK, khz_to_mhz_ceil(clk_mgr_base->clks.dramclk_khz)); + } if (clk_mgr_base->clks.num_ways != new_clocks->num_ways && clk_mgr_base->clks.num_ways > new_clocks->num_ways) { -- cgit v1.2.3 From 6f0c228ed9184287031a66b46a79e5a3d2e73a86 Mon Sep 17 00:00:00 2001 From: Sung Joon Kim Date: Thu, 18 Apr 2024 16:59:36 -0400 Subject: drm/amd/display: Disable seamless boot on 128b/132b encoding [why] preOS will not support display mode programming and link training for UHBR rates. [how] If we detect a sink that's UHBR capable, disable seamless boot Reviewed-by: Anthony Koo Acked-by: Wayne Lin Signed-off-by: Sung Joon Kim Tested-by: Daniel Wheeler Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/dc/core/dc.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/gpu/drm/amd/display/dc/core/dc.c b/drivers/gpu/drm/amd/display/dc/core/dc.c index 03b554e912a2..d68c83e40d4d 100644 --- a/drivers/gpu/drm/amd/display/dc/core/dc.c +++ b/drivers/gpu/drm/amd/display/dc/core/dc.c @@ -1801,6 +1801,9 @@ bool dc_validate_boot_timing(const struct dc *dc, return false; } + if (link->dpcd_caps.channel_coding_cap.bits.DP_128b_132b_SUPPORTED) + return false; + if (dc->link_srv->edp_is_ilr_optimization_required(link, crtc_timing)) { DC_LOG_EVENT_LINK_TRAINING("Seamless boot disabled to optimize eDP link rate\n"); return false; -- cgit v1.2.3 From f5b9053398e70a0c10aa9cb4dd5910ab6bc457c5 Mon Sep 17 00:00:00 2001 From: Lancelot SIX Date: Wed, 10 Apr 2024 14:14:13 +0100 Subject: drm/amdkfd: Flush the process wq before creating a kfd_process There is a race condition when re-creating a kfd_process for a process. This has been observed when a process under the debugger executes exec(3). In this scenario: - The process executes exec. - This will eventually release the process's mm, which will cause the kfd_process object associated with the process to be freed (kfd_process_free_notifier decrements the reference count to the kfd_process to 0). This causes kfd_process_ref_release to enqueue kfd_process_wq_release to the kfd_process_wq. - The debugger receives the PTRACE_EVENT_EXEC notification, and tries to re-enable AMDGPU traps (KFD_IOC_DBG_TRAP_ENABLE). - When handling this request, KFD tries to re-create a kfd_process. This eventually calls kfd_create_process and kobject_init_and_add. At this point the call to kobject_init_and_add can fail because the old kfd_process.kobj has not been freed yet by kfd_process_wq_release. This patch proposes to avoid this race by making sure to drain kfd_process_wq before creating a new kfd_process object. This way, we know that any cleanup task is done executing when we reach kobject_init_and_add. Signed-off-by: Lancelot SIX Reviewed-by: Felix Kuehling Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdkfd/kfd_process.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_process.c b/drivers/gpu/drm/amd/amdkfd/kfd_process.c index 58c1fe542193..451bb058cc62 100644 --- a/drivers/gpu/drm/amd/amdkfd/kfd_process.c +++ b/drivers/gpu/drm/amd/amdkfd/kfd_process.c @@ -829,6 +829,14 @@ struct kfd_process *kfd_create_process(struct task_struct *thread) if (process) { pr_debug("Process already found\n"); } else { + /* If the process just called exec(3), it is possible that the + * cleanup of the kfd_process (following the release of the mm + * of the old process image) is still in the cleanup work queue. + * Make sure to drain any job before trying to recreate any + * resource for this process. + */ + flush_workqueue(kfd_process_wq); + process = create_process(thread); if (IS_ERR(process)) goto out; -- cgit v1.2.3 From 705d0480e6ae5a73ca3a9c04316d0678e19a46ed Mon Sep 17 00:00:00 2001 From: Shashank Sharma Date: Mon, 29 Apr 2024 14:29:47 +0200 Subject: drm/amdgpu: fix doorbell regression This patch adds a missed handling of PL domain doorbell while handling VRAM faults. Cc: Christian Koenig Cc: Alex Deucher Fixes: a6ff969fe9cb ("drm/amdgpu: fix visible VRAM handling during faults") Reviewed-by: Christian Koenig Signed-off-by: Shashank Sharma Signed-off-by: Arvind Yadav Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c index 4ffee5545265..109fe557a02b 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c @@ -419,7 +419,7 @@ bool amdgpu_res_cpu_visible(struct amdgpu_device *adev, return false; if (res->mem_type == TTM_PL_SYSTEM || res->mem_type == TTM_PL_TT || - res->mem_type == AMDGPU_PL_PREEMPT) + res->mem_type == AMDGPU_PL_PREEMPT || res->mem_type == AMDGPU_PL_DOORBELL) return true; if (res->mem_type != TTM_PL_VRAM) -- cgit v1.2.3 From 4756fa529b2f12b7cb8f21fe229b0f6f47190829 Mon Sep 17 00:00:00 2001 From: Mans Rullgard Date: Tue, 30 Apr 2024 19:27:05 +0100 Subject: spi: fix null pointer dereference within spi_sync If spi_sync() is called with the non-empty queue and the same spi_message is then reused, the complete callback for the message remains set while the context is cleared, leading to a null pointer dereference when the callback is invoked from spi_finalize_current_message(). With function inlining disabled, the call stack might look like this: _raw_spin_lock_irqsave from complete_with_flags+0x18/0x58 complete_with_flags from spi_complete+0x8/0xc spi_complete from spi_finalize_current_message+0xec/0x184 spi_finalize_current_message from spi_transfer_one_message+0x2a8/0x474 spi_transfer_one_message from __spi_pump_transfer_message+0x104/0x230 __spi_pump_transfer_message from __spi_transfer_message_noqueue+0x30/0xc4 __spi_transfer_message_noqueue from __spi_sync+0x204/0x248 __spi_sync from spi_sync+0x24/0x3c spi_sync from mcp251xfd_regmap_crc_read+0x124/0x28c [mcp251xfd] mcp251xfd_regmap_crc_read [mcp251xfd] from _regmap_raw_read+0xf8/0x154 _regmap_raw_read from _regmap_bus_read+0x44/0x70 _regmap_bus_read from _regmap_read+0x60/0xd8 _regmap_read from regmap_read+0x3c/0x5c regmap_read from mcp251xfd_alloc_can_err_skb+0x1c/0x54 [mcp251xfd] mcp251xfd_alloc_can_err_skb [mcp251xfd] from mcp251xfd_irq+0x194/0xe70 [mcp251xfd] mcp251xfd_irq [mcp251xfd] from irq_thread_fn+0x1c/0x78 irq_thread_fn from irq_thread+0x118/0x1f4 irq_thread from kthread+0xd8/0xf4 kthread from ret_from_fork+0x14/0x28 Fix this by also setting message->complete to NULL when the transfer is complete. Fixes: ae7d2346dc89 ("spi: Don't use the message queue if possible in spi_sync") Signed-off-by: Mans Rullgard Link: https://lore.kernel.org/r/20240430182705.13019-1-mans@mansr.com Signed-off-by: Mark Brown --- drivers/spi/spi.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c index ff75838c1b5d..a2c467d9e92f 100644 --- a/drivers/spi/spi.c +++ b/drivers/spi/spi.c @@ -4523,6 +4523,7 @@ static int __spi_sync(struct spi_device *spi, struct spi_message *message) wait_for_completion(&done); status = message->status; } + message->complete = NULL; message->context = NULL; return status; -- cgit v1.2.3 From 02b670c1f88e78f42a6c5aee155c7b26960ca054 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Mon, 29 Apr 2024 10:00:51 +0200 Subject: x86/mm: Remove broken vsyscall emulation code from the page fault code The syzbot-reported stack trace from hell in this discussion thread actually has three nested page faults: https://lore.kernel.org/r/000000000000d5f4fc0616e816d4@google.com ... and I think that's actually the important thing here: - the first page fault is from user space, and triggers the vsyscall emulation. - the second page fault is from __do_sys_gettimeofday(), and that should just have caused the exception that then sets the return value to -EFAULT - the third nested page fault is due to _raw_spin_unlock_irqrestore() -> preempt_schedule() -> trace_sched_switch(), which then causes a BPF trace program to run, which does that bpf_probe_read_compat(), which causes that page fault under pagefault_disable(). It's quite the nasty backtrace, and there's a lot going on. The problem is literally the vsyscall emulation, which sets current->thread.sig_on_uaccess_err = 1; and that causes the fixup_exception() code to send the signal *despite* the exception being caught. And I think that is in fact completely bogus. It's completely bogus exactly because it sends that signal even when it *shouldn't* be sent - like for the BPF user mode trace gathering. In other words, I think the whole "sig_on_uaccess_err" thing is entirely broken, because it makes any nested page-faults do all the wrong things. Now, arguably, I don't think anybody should enable vsyscall emulation any more, but this test case clearly does. I think we should just make the "send SIGSEGV" be something that the vsyscall emulation does on its own, not this broken per-thread state for something that isn't actually per thread. The x86 page fault code actually tried to deal with the "incorrect nesting" by having that: if (in_interrupt()) return; which ignores the sig_on_uaccess_err case when it happens in interrupts, but as shown by this example, these nested page faults do not need to be about interrupts at all. IOW, I think the only right thing is to remove that horrendously broken code. The attached patch looks like the ObviouslyCorrect(tm) thing to do. NOTE! This broken code goes back to this commit in 2011: 4fc3490114bb ("x86-64: Set siginfo and context on vsyscall emulation faults") ... and back then the reason was to get all the siginfo details right. Honestly, I do not for a moment believe that it's worth getting the siginfo details right here, but part of the commit says: This fixes issues with UML when vsyscall=emulate. ... and so my patch to remove this garbage will probably break UML in this situation. I do not believe that anybody should be running with vsyscall=emulate in 2024 in the first place, much less if you are doing things like UML. But let's see if somebody screams. Reported-and-tested-by: syzbot+83e7f982ca045ab4405c@syzkaller.appspotmail.com Signed-off-by: Linus Torvalds Signed-off-by: Ingo Molnar Tested-by: Jiri Olsa Acked-by: Andy Lutomirski Link: https://lore.kernel.org/r/CAHk-=wh9D6f7HUkDgZHKmDCHUQmp+Co89GP+b8+z+G56BKeyNg@mail.gmail.com --- arch/x86/entry/vsyscall/vsyscall_64.c | 28 ++-------------------------- arch/x86/include/asm/processor.h | 1 - arch/x86/mm/fault.c | 33 +-------------------------------- 3 files changed, 3 insertions(+), 59 deletions(-) diff --git a/arch/x86/entry/vsyscall/vsyscall_64.c b/arch/x86/entry/vsyscall/vsyscall_64.c index a3c0df11d0e6..2fb7d53cf333 100644 --- a/arch/x86/entry/vsyscall/vsyscall_64.c +++ b/arch/x86/entry/vsyscall/vsyscall_64.c @@ -98,11 +98,6 @@ static int addr_to_vsyscall_nr(unsigned long addr) static bool write_ok_or_segv(unsigned long ptr, size_t size) { - /* - * XXX: if access_ok, get_user, and put_user handled - * sig_on_uaccess_err, this could go away. - */ - if (!access_ok((void __user *)ptr, size)) { struct thread_struct *thread = ¤t->thread; @@ -120,10 +115,8 @@ static bool write_ok_or_segv(unsigned long ptr, size_t size) bool emulate_vsyscall(unsigned long error_code, struct pt_regs *regs, unsigned long address) { - struct task_struct *tsk; unsigned long caller; int vsyscall_nr, syscall_nr, tmp; - int prev_sig_on_uaccess_err; long ret; unsigned long orig_dx; @@ -172,8 +165,6 @@ bool emulate_vsyscall(unsigned long error_code, goto sigsegv; } - tsk = current; - /* * Check for access_ok violations and find the syscall nr. * @@ -234,12 +225,8 @@ bool emulate_vsyscall(unsigned long error_code, goto do_ret; /* skip requested */ /* - * With a real vsyscall, page faults cause SIGSEGV. We want to - * preserve that behavior to make writing exploits harder. + * With a real vsyscall, page faults cause SIGSEGV. */ - prev_sig_on_uaccess_err = current->thread.sig_on_uaccess_err; - current->thread.sig_on_uaccess_err = 1; - ret = -EFAULT; switch (vsyscall_nr) { case 0: @@ -262,23 +249,12 @@ bool emulate_vsyscall(unsigned long error_code, break; } - current->thread.sig_on_uaccess_err = prev_sig_on_uaccess_err; - check_fault: if (ret == -EFAULT) { /* Bad news -- userspace fed a bad pointer to a vsyscall. */ warn_bad_vsyscall(KERN_INFO, regs, "vsyscall fault (exploit attempt?)"); - - /* - * If we failed to generate a signal for any reason, - * generate one here. (This should be impossible.) - */ - if (WARN_ON_ONCE(!sigismember(&tsk->pending.signal, SIGBUS) && - !sigismember(&tsk->pending.signal, SIGSEGV))) - goto sigsegv; - - return true; /* Don't emulate the ret. */ + goto sigsegv; } regs->ax = ret; diff --git a/arch/x86/include/asm/processor.h b/arch/x86/include/asm/processor.h index 811548f131f4..78e51b0d6433 100644 --- a/arch/x86/include/asm/processor.h +++ b/arch/x86/include/asm/processor.h @@ -472,7 +472,6 @@ struct thread_struct { unsigned long iopl_emul; unsigned int iopl_warn:1; - unsigned int sig_on_uaccess_err:1; /* * Protection Keys Register for Userspace. Loaded immediately on diff --git a/arch/x86/mm/fault.c b/arch/x86/mm/fault.c index 622d12ec7f08..bba4e020dd64 100644 --- a/arch/x86/mm/fault.c +++ b/arch/x86/mm/fault.c @@ -723,39 +723,8 @@ kernelmode_fixup_or_oops(struct pt_regs *regs, unsigned long error_code, WARN_ON_ONCE(user_mode(regs)); /* Are we prepared to handle this kernel fault? */ - if (fixup_exception(regs, X86_TRAP_PF, error_code, address)) { - /* - * Any interrupt that takes a fault gets the fixup. This makes - * the below recursive fault logic only apply to a faults from - * task context. - */ - if (in_interrupt()) - return; - - /* - * Per the above we're !in_interrupt(), aka. task context. - * - * In this case we need to make sure we're not recursively - * faulting through the emulate_vsyscall() logic. - */ - if (current->thread.sig_on_uaccess_err && signal) { - sanitize_error_code(address, &error_code); - - set_signal_archinfo(address, error_code); - - if (si_code == SEGV_PKUERR) { - force_sig_pkuerr((void __user *)address, pkey); - } else { - /* XXX: hwpoison faults will set the wrong code. */ - force_sig_fault(signal, si_code, (void __user *)address); - } - } - - /* - * Barring that, we can do the fixup and be happy. - */ + if (fixup_exception(regs, X86_TRAP_PF, error_code, address)) return; - } /* * AMD erratum #91 manifests as a spurious page fault on a PREFETCH -- cgit v1.2.3 From a4499998c7f4dfa15ddba18b266e187cf29b7c76 Mon Sep 17 00:00:00 2001 From: Harald Freudenberger Date: Mon, 25 Mar 2024 09:43:53 +0100 Subject: s390/zcrypt: Fix wrong format string in debug feature printout Fix wrong format string debug feature: %04x was used to print out a 32 bit value. - changed to %08x. Signed-off-by: Harald Freudenberger Reviewed-by: Ingo Franzki Reviewed-by: Holger Dengler Signed-off-by: Alexander Gordeev --- drivers/s390/crypto/zcrypt_ep11misc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/s390/crypto/zcrypt_ep11misc.c b/drivers/s390/crypto/zcrypt_ep11misc.c index eb7f5489ccf9..a1b55fdf3510 100644 --- a/drivers/s390/crypto/zcrypt_ep11misc.c +++ b/drivers/s390/crypto/zcrypt_ep11misc.c @@ -556,7 +556,7 @@ static int check_reply_pl(const u8 *pl, const char *func) pl += 2; ret = *((u32 *)pl); if (ret != 0) { - ZCRYPT_DBF_ERR("%s return value 0x%04x != 0\n", func, ret); + ZCRYPT_DBF_ERR("%s return value 0x%08x != 0\n", func, ret); return -EIO; } -- cgit v1.2.3 From c0e983b697f45f5e413b00c94037e56b7870cfcd Mon Sep 17 00:00:00 2001 From: Harald Freudenberger Date: Mon, 25 Mar 2024 09:59:19 +0100 Subject: s390/zcrypt: Handle ep11 cprb return code An EP11 reply cprb contains a field ret_code which may hold an error code different than the error code stored in the payload of the cprb. As of now all the EP11 misc functions do not evaluate this field but focus on the error code in the payload. Before checking the payload error, first the cprb error field should be evaluated which is introduced with this patch. If the return code value 0x000c0003 is seen, this indicates a busy situation which is reflected by -EBUSY in the zcrpyt_ep11misc.c low level function. A higher level caller should consider to retry after waiting a dedicated duration (say 1 second). Fixes: ed6776c96c60 ("s390/crypto: remove retry loop with sleep from PAES pkey invocation") Signed-off-by: Harald Freudenberger Reviewed-by: Ingo Franzki Reviewed-by: Holger Dengler Signed-off-by: Alexander Gordeev --- drivers/s390/crypto/zcrypt_ep11misc.c | 46 +++++++++++++++++++++++++++++++++++ 1 file changed, 46 insertions(+) diff --git a/drivers/s390/crypto/zcrypt_ep11misc.c b/drivers/s390/crypto/zcrypt_ep11misc.c index a1b55fdf3510..9bcf8fc69ebe 100644 --- a/drivers/s390/crypto/zcrypt_ep11misc.c +++ b/drivers/s390/crypto/zcrypt_ep11misc.c @@ -563,6 +563,22 @@ static int check_reply_pl(const u8 *pl, const char *func) return 0; } +/* Check ep11 reply cprb, return 0 or suggested errno value. */ +static int check_reply_cprb(const struct ep11_cprb *rep, const char *func) +{ + /* check ep11 reply return code field */ + if (rep->ret_code) { + ZCRYPT_DBF_ERR("%s ep11 reply ret_code=0x%08x\n", __func__, + rep->ret_code); + if (rep->ret_code == 0x000c0003) + return -EBUSY; + else + return -EIO; + } + + return 0; +} + /* * Helper function which does an ep11 query with given query type. */ @@ -627,6 +643,12 @@ static int ep11_query_info(u16 cardnr, u16 domain, u32 query_type, goto out; } + /* check ep11 reply cprb */ + rc = check_reply_cprb(rep, __func__); + if (rc) + goto out; + + /* check payload */ rc = check_reply_pl((u8 *)rep_pl, __func__); if (rc) goto out; @@ -877,6 +899,12 @@ static int _ep11_genaeskey(u16 card, u16 domain, goto out; } + /* check ep11 reply cprb */ + rc = check_reply_cprb(rep, __func__); + if (rc) + goto out; + + /* check payload */ rc = check_reply_pl((u8 *)rep_pl, __func__); if (rc) goto out; @@ -1028,6 +1056,12 @@ static int ep11_cryptsingle(u16 card, u16 domain, goto out; } + /* check ep11 reply cprb */ + rc = check_reply_cprb(rep, __func__); + if (rc) + goto out; + + /* check payload */ rc = check_reply_pl((u8 *)rep_pl, __func__); if (rc) goto out; @@ -1185,6 +1219,12 @@ static int _ep11_unwrapkey(u16 card, u16 domain, goto out; } + /* check ep11 reply cprb */ + rc = check_reply_cprb(rep, __func__); + if (rc) + goto out; + + /* check payload */ rc = check_reply_pl((u8 *)rep_pl, __func__); if (rc) goto out; @@ -1339,6 +1379,12 @@ static int _ep11_wrapkey(u16 card, u16 domain, goto out; } + /* check ep11 reply cprb */ + rc = check_reply_cprb(rep, __func__); + if (rc) + goto out; + + /* check payload */ rc = check_reply_pl((u8 *)rep_pl, __func__); if (rc) goto out; -- cgit v1.2.3 From da5658320bc962634c36ece6052c5a543493e3cf Mon Sep 17 00:00:00 2001 From: Harald Freudenberger Date: Thu, 25 Apr 2024 16:22:51 +0200 Subject: s390/zcrypt: Use EBUSY to indicate temp unavailability Use -EBUSY instead of -EAGAIN in zcrypt_ccamisc.c in cases where the CCA card returns 8/2290 to indicate a temporarily unavailability of this function. Fixes: ed6776c96c60 ("s390/crypto: remove retry loop with sleep from PAES pkey invocation") Signed-off-by: Harald Freudenberger Reviewed-by: Ingo Franzki Reviewed-by: Holger Dengler Signed-off-by: Alexander Gordeev --- drivers/s390/crypto/zcrypt_ccamisc.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/s390/crypto/zcrypt_ccamisc.c b/drivers/s390/crypto/zcrypt_ccamisc.c index 0a3a678ffc7e..6087547328ce 100644 --- a/drivers/s390/crypto/zcrypt_ccamisc.c +++ b/drivers/s390/crypto/zcrypt_ccamisc.c @@ -658,7 +658,7 @@ int cca_sec2protkey(u16 cardnr, u16 domain, (int)prepcblk->ccp_rtcode, (int)prepcblk->ccp_rscode); if (prepcblk->ccp_rtcode == 8 && prepcblk->ccp_rscode == 2290) - rc = -EAGAIN; + rc = -EBUSY; else rc = -EIO; goto out; @@ -1263,7 +1263,7 @@ int cca_cipher2protkey(u16 cardnr, u16 domain, const u8 *ckey, (int)prepcblk->ccp_rtcode, (int)prepcblk->ccp_rscode); if (prepcblk->ccp_rtcode == 8 && prepcblk->ccp_rscode == 2290) - rc = -EAGAIN; + rc = -EBUSY; else rc = -EIO; goto out; @@ -1426,7 +1426,7 @@ int cca_ecc2protkey(u16 cardnr, u16 domain, const u8 *key, (int)prepcblk->ccp_rtcode, (int)prepcblk->ccp_rscode); if (prepcblk->ccp_rtcode == 8 && prepcblk->ccp_rscode == 2290) - rc = -EAGAIN; + rc = -EBUSY; else rc = -EIO; goto out; -- cgit v1.2.3 From 7bbe449d0bdb68892cc67e9f5f1bfa106a3588d5 Mon Sep 17 00:00:00 2001 From: Harald Freudenberger Date: Thu, 25 Apr 2024 16:29:48 +0200 Subject: s390/paes: Reestablish retry loop in paes With commit ed6776c96c60 ("s390/crypto: remove retry loop with sleep from PAES pkey invocation") the retry loop to retry derivation of a protected key from a secure key has been removed. This was based on the assumption that theses retries are not needed any more as proper retries are done in the zcrypt layer. However, tests have revealed that there exist some cases with master key change in the HSM and immediately (< 1 second) attempt to derive a protected key from a secure key with exact this HSM may eventually fail. The low level functions in zcrypt_ccamisc.c and zcrypt_ep11misc.c detect and report this temporary failure and report it to the caller as -EBUSY. The re-established retry loop in the paes implementation catches exactly this -EBUSY and eventually may run some retries. Fixes: ed6776c96c60 ("s390/crypto: remove retry loop with sleep from PAES pkey invocation") Signed-off-by: Harald Freudenberger Reviewed-by: Ingo Franzki Reviewed-by: Holger Dengler Signed-off-by: Alexander Gordeev --- arch/s390/crypto/paes_s390.c | 15 +++++++++++++-- 1 file changed, 13 insertions(+), 2 deletions(-) diff --git a/arch/s390/crypto/paes_s390.c b/arch/s390/crypto/paes_s390.c index 99f7e1f2b70a..99ea3f12c5d2 100644 --- a/arch/s390/crypto/paes_s390.c +++ b/arch/s390/crypto/paes_s390.c @@ -125,8 +125,19 @@ struct s390_pxts_ctx { static inline int __paes_keyblob2pkey(struct key_blob *kb, struct pkey_protkey *pk) { - return pkey_keyblob2pkey(kb->key, kb->keylen, - pk->protkey, &pk->len, &pk->type); + int i, ret = -EIO; + + /* try three times in case of busy card */ + for (i = 0; ret && i < 3; i++) { + if (ret == -EBUSY && in_task()) { + if (msleep_interruptible(1000)) + return -EINTR; + } + ret = pkey_keyblob2pkey(kb->key, kb->keylen, + pk->protkey, &pk->len, &pk->type); + } + + return ret; } static inline int __paes_convert_key(struct s390_paes_ctx *ctx) -- cgit v1.2.3 From 863fe60ed27f2c85172654a63c5b827e72c8b2e6 Mon Sep 17 00:00:00 2001 From: Nilay Shroff Date: Tue, 16 Apr 2024 13:49:23 +0530 Subject: nvme: find numa distance only if controller has valid numa id On system where native nvme multipath is configured and iopolicy is set to numa but the nvme controller numa node id is undefined or -1 (NUMA_NO_NODE) then avoid calculating node distance for finding optimal io path. In such case we may access numa distance table with invalid index and that may potentially refer to incorrect memory. So this patch ensures that if the nvme controller numa node id is -1 then instead of calculating node distance for finding optimal io path, we set the numa node distance of such controller to default 10 (LOCAL_DISTANCE). Link: https://lore.kernel.org/all/20240413090614.678353-1-nilay@linux.ibm.com/ Signed-off-by: Nilay Shroff Reviewed-by: Christoph Hellwig Reviewed-by: Sagi Grimberg Reviewed-by: Chaitanya Kulkarni Signed-off-by: Keith Busch --- drivers/nvme/host/multipath.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/nvme/host/multipath.c b/drivers/nvme/host/multipath.c index 5397fb428b24..d16e976ae1a4 100644 --- a/drivers/nvme/host/multipath.c +++ b/drivers/nvme/host/multipath.c @@ -247,7 +247,8 @@ static struct nvme_ns *__nvme_find_path(struct nvme_ns_head *head, int node) if (nvme_path_is_disabled(ns)) continue; - if (READ_ONCE(head->subsys->iopolicy) == NVME_IOPOLICY_NUMA) + if (ns->ctrl->numa_node != NUMA_NO_NODE && + READ_ONCE(head->subsys->iopolicy) == NVME_IOPOLICY_NUMA) distance = node_distance(node, ns->ctrl->numa_node); else distance = LOCAL_DISTANCE; -- cgit v1.2.3 From 46b8f9f74f6d500871985e22eb19560b21f3bc81 Mon Sep 17 00:00:00 2001 From: Maurizio Lombardi Date: Wed, 10 Apr 2024 11:48:41 +0200 Subject: nvmet-auth: return the error code to the nvmet_auth_host_hash() callers If the nvmet_auth_host_hash() function fails, the error code should be returned to its callers. Signed-off-by: Maurizio Lombardi Reviewed-by: Sagi Grimberg Reviewed-by: Chaitanya Kulkarni Signed-off-by: Keith Busch --- drivers/nvme/target/auth.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/nvme/target/auth.c b/drivers/nvme/target/auth.c index 3ddbc3880cac..9e51c064b072 100644 --- a/drivers/nvme/target/auth.c +++ b/drivers/nvme/target/auth.c @@ -370,7 +370,7 @@ out_free_response: nvme_auth_free_key(transformed_key); out_free_tfm: crypto_free_shash(shash_tfm); - return 0; + return ret; } int nvmet_auth_ctrl_hash(struct nvmet_req *req, u8 *response, -- cgit v1.2.3 From 445f9119e70368ccc964575c2a6d3176966a9d65 Mon Sep 17 00:00:00 2001 From: Maurizio Lombardi Date: Wed, 10 Apr 2024 11:48:42 +0200 Subject: nvmet-auth: replace pr_debug() with pr_err() to report an error. In nvmet_auth_host_hash(), if a mismatch is detected in the hash length the kernel should print an error. Signed-off-by: Maurizio Lombardi Reviewed-by: Sagi Grimberg Reviewed-by: Chaitanya Kulkarni Signed-off-by: Keith Busch --- drivers/nvme/target/auth.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/nvme/target/auth.c b/drivers/nvme/target/auth.c index 9e51c064b072..fb518b00f71f 100644 --- a/drivers/nvme/target/auth.c +++ b/drivers/nvme/target/auth.c @@ -285,9 +285,9 @@ int nvmet_auth_host_hash(struct nvmet_req *req, u8 *response, } if (shash_len != crypto_shash_digestsize(shash_tfm)) { - pr_debug("%s: hash len mismatch (len %d digest %d)\n", - __func__, shash_len, - crypto_shash_digestsize(shash_tfm)); + pr_err("%s: hash len mismatch (len %d digest %d)\n", + __func__, shash_len, + crypto_shash_digestsize(shash_tfm)); ret = -EINVAL; goto out_free_tfm; } -- cgit v1.2.3 From 25bb3534ee21e39eb9301c4edd7182eb83cb0d07 Mon Sep 17 00:00:00 2001 From: Nilay Shroff Date: Thu, 25 Apr 2024 19:33:00 +0530 Subject: nvme: cancel pending I/O if nvme controller is in terminal state While I/O is running, if the pci bus error occurs then in-flight I/O can not complete. Worst, if at this time, user (logically) hot-unplug the nvme disk then the nvme_remove() code path can't forward progress until in-flight I/O is cancelled. So these sequence of events may potentially hang hot-unplug code path indefinitely. This patch helps cancel the pending/in-flight I/O from the nvme request timeout handler in case the nvme controller is in the terminal (DEAD/DELETING/DELETING_NOIO) state and that helps nvme_remove() code path forward progress and finish successfully. Link: https://lore.kernel.org/all/199be893-5dfa-41e5-b6f2-40ac90ebccc4@linux.ibm.com/ Signed-off-by: Nilay Shroff Reviewed-by: Sagi Grimberg Signed-off-by: Keith Busch --- drivers/nvme/host/core.c | 21 --------------------- drivers/nvme/host/nvme.h | 21 +++++++++++++++++++++ drivers/nvme/host/pci.c | 8 +++++++- 3 files changed, 28 insertions(+), 22 deletions(-) diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c index e4bec200ebeb..095f59e7aa93 100644 --- a/drivers/nvme/host/core.c +++ b/drivers/nvme/host/core.c @@ -628,27 +628,6 @@ bool nvme_change_ctrl_state(struct nvme_ctrl *ctrl, } EXPORT_SYMBOL_GPL(nvme_change_ctrl_state); -/* - * Returns true for sink states that can't ever transition back to live. - */ -static bool nvme_state_terminal(struct nvme_ctrl *ctrl) -{ - switch (nvme_ctrl_state(ctrl)) { - case NVME_CTRL_NEW: - case NVME_CTRL_LIVE: - case NVME_CTRL_RESETTING: - case NVME_CTRL_CONNECTING: - return false; - case NVME_CTRL_DELETING: - case NVME_CTRL_DELETING_NOIO: - case NVME_CTRL_DEAD: - return true; - default: - WARN_ONCE(1, "Unhandled ctrl state:%d", ctrl->state); - return true; - } -} - /* * Waits for the controller state to be resetting, or returns false if it is * not possible to ever transition to that state. diff --git a/drivers/nvme/host/nvme.h b/drivers/nvme/host/nvme.h index d0ed64dc7380..b564c5f1450c 100644 --- a/drivers/nvme/host/nvme.h +++ b/drivers/nvme/host/nvme.h @@ -741,6 +741,27 @@ static inline bool nvme_is_aen_req(u16 qid, __u16 command_id) nvme_tag_from_cid(command_id) >= NVME_AQ_BLK_MQ_DEPTH; } +/* + * Returns true for sink states that can't ever transition back to live. + */ +static inline bool nvme_state_terminal(struct nvme_ctrl *ctrl) +{ + switch (nvme_ctrl_state(ctrl)) { + case NVME_CTRL_NEW: + case NVME_CTRL_LIVE: + case NVME_CTRL_RESETTING: + case NVME_CTRL_CONNECTING: + return false; + case NVME_CTRL_DELETING: + case NVME_CTRL_DELETING_NOIO: + case NVME_CTRL_DEAD: + return true; + default: + WARN_ONCE(1, "Unhandled ctrl state:%d", ctrl->state); + return true; + } +} + void nvme_complete_rq(struct request *req); void nvme_complete_batch_req(struct request *req); diff --git a/drivers/nvme/host/pci.c b/drivers/nvme/host/pci.c index 8e0bb9692685..e393f6947ce4 100644 --- a/drivers/nvme/host/pci.c +++ b/drivers/nvme/host/pci.c @@ -1286,6 +1286,9 @@ static enum blk_eh_timer_return nvme_timeout(struct request *req) u32 csts = readl(dev->bar + NVME_REG_CSTS); u8 opcode; + if (nvme_state_terminal(&dev->ctrl)) + goto disable; + /* If PCI error recovery process is happening, we cannot reset or * the recovery mechanism will surely fail. */ @@ -1390,8 +1393,11 @@ static enum blk_eh_timer_return nvme_timeout(struct request *req) return BLK_EH_RESET_TIMER; disable: - if (!nvme_change_ctrl_state(&dev->ctrl, NVME_CTRL_RESETTING)) + if (!nvme_change_ctrl_state(&dev->ctrl, NVME_CTRL_RESETTING)) { + if (nvme_state_terminal(&dev->ctrl)) + nvme_dev_disable(dev, true); return BLK_EH_DONE; + } nvme_dev_disable(dev, false); if (nvme_try_sched_reset(&dev->ctrl)) -- cgit v1.2.3 From 6825bdde44340c5a9121f6d6fa25cc885bd9e821 Mon Sep 17 00:00:00 2001 From: Sagi Grimberg Date: Sun, 28 Apr 2024 11:49:49 +0300 Subject: nvmet-tcp: fix possible memory leak when tearing down a controller When we teardown the controller, we wait for pending I/Os to complete (sq->ref on all queues to drop to zero) and then we go over the commands, and free their command buffers in case they are still fetching data from the host (e.g. processing nvme writes) and have yet to take a reference on the sq. However, we may miss the case where commands have failed before executing and are queued for sending a response, but will never occur because the queue socket is already down. In this case we may miss deallocating command buffers. Solve this by freeing all commands buffers as nvmet_tcp_free_cmd_buffers is idempotent anyways. Reported-by: Yi Zhang Tested-by: Yi Zhang Signed-off-by: Sagi Grimberg Reviewed-by: Christoph Hellwig Signed-off-by: Keith Busch --- drivers/nvme/target/tcp.c | 11 ++++------- 1 file changed, 4 insertions(+), 7 deletions(-) diff --git a/drivers/nvme/target/tcp.c b/drivers/nvme/target/tcp.c index a5422e2c979a..380f22ee3ebb 100644 --- a/drivers/nvme/target/tcp.c +++ b/drivers/nvme/target/tcp.c @@ -348,6 +348,7 @@ static int nvmet_tcp_check_ddgst(struct nvmet_tcp_queue *queue, void *pdu) return 0; } +/* If cmd buffers are NULL, no operation is performed */ static void nvmet_tcp_free_cmd_buffers(struct nvmet_tcp_cmd *cmd) { kfree(cmd->iov); @@ -1581,13 +1582,9 @@ static void nvmet_tcp_free_cmd_data_in_buffers(struct nvmet_tcp_queue *queue) struct nvmet_tcp_cmd *cmd = queue->cmds; int i; - for (i = 0; i < queue->nr_cmds; i++, cmd++) { - if (nvmet_tcp_need_data_in(cmd)) - nvmet_tcp_free_cmd_buffers(cmd); - } - - if (!queue->nr_cmds && nvmet_tcp_need_data_in(&queue->connect)) - nvmet_tcp_free_cmd_buffers(&queue->connect); + for (i = 0; i < queue->nr_cmds; i++, cmd++) + nvmet_tcp_free_cmd_buffers(cmd); + nvmet_tcp_free_cmd_buffers(&queue->connect); } static void nvmet_tcp_release_queue_work(struct work_struct *w) -- cgit v1.2.3 From 505363957fad35f7aed9a2b0d8dad73451a80fb5 Mon Sep 17 00:00:00 2001 From: Sagi Grimberg Date: Sun, 28 Apr 2024 12:25:40 +0300 Subject: nvmet: fix nvme status code when namespace is disabled If the user disabled a nvmet namespace, it is removed from the subsystem namespaces list. When nvmet processes a command directed to an nsid that was disabled, it cannot differentiate between a nsid that is disabled vs. a non-existent namespace, and resorts to return NVME_SC_INVALID_NS with the dnr bit set. This translates to a non-retryable status for the host, which translates to a user error. We should expect disabled namespaces to not cause an I/O error in a multipath environment. Address this by searching a configfs item for the namespace nvmet failed to find, and if we found one, conclude that the namespace is disabled (perhaps temporarily). Return NVME_SC_INTERNAL_PATH_ERROR in this case and keep DNR bit cleared. Reported-by: Jirong Feng Tested-by: Jirong Feng Signed-off-by: Sagi Grimberg Reviewed-by: Christoph Hellwig Signed-off-by: Keith Busch --- drivers/nvme/target/configfs.c | 13 +++++++++++++ drivers/nvme/target/core.c | 5 ++++- drivers/nvme/target/nvmet.h | 1 + 3 files changed, 18 insertions(+), 1 deletion(-) diff --git a/drivers/nvme/target/configfs.c b/drivers/nvme/target/configfs.c index a2325330bf22..89a001101a7f 100644 --- a/drivers/nvme/target/configfs.c +++ b/drivers/nvme/target/configfs.c @@ -754,6 +754,19 @@ static struct configfs_attribute *nvmet_ns_attrs[] = { NULL, }; +bool nvmet_subsys_nsid_exists(struct nvmet_subsys *subsys, u32 nsid) +{ + struct config_item *ns_item; + char name[4] = {}; + + if (sprintf(name, "%u", nsid) <= 0) + return false; + mutex_lock(&subsys->namespaces_group.cg_subsys->su_mutex); + ns_item = config_group_find_item(&subsys->namespaces_group, name); + mutex_unlock(&subsys->namespaces_group.cg_subsys->su_mutex); + return ns_item != NULL; +} + static void nvmet_ns_release(struct config_item *item) { struct nvmet_ns *ns = to_nvmet_ns(item); diff --git a/drivers/nvme/target/core.c b/drivers/nvme/target/core.c index 8860a3eb71ec..e06013c5dace 100644 --- a/drivers/nvme/target/core.c +++ b/drivers/nvme/target/core.c @@ -437,10 +437,13 @@ void nvmet_stop_keep_alive_timer(struct nvmet_ctrl *ctrl) u16 nvmet_req_find_ns(struct nvmet_req *req) { u32 nsid = le32_to_cpu(req->cmd->common.nsid); + struct nvmet_subsys *subsys = nvmet_req_subsys(req); - req->ns = xa_load(&nvmet_req_subsys(req)->namespaces, nsid); + req->ns = xa_load(&subsys->namespaces, nsid); if (unlikely(!req->ns)) { req->error_loc = offsetof(struct nvme_common_command, nsid); + if (nvmet_subsys_nsid_exists(subsys, nsid)) + return NVME_SC_INTERNAL_PATH_ERROR; return NVME_SC_INVALID_NS | NVME_SC_DNR; } diff --git a/drivers/nvme/target/nvmet.h b/drivers/nvme/target/nvmet.h index f460728e1df1..c1306de1f4dd 100644 --- a/drivers/nvme/target/nvmet.h +++ b/drivers/nvme/target/nvmet.h @@ -543,6 +543,7 @@ void nvmet_subsys_disc_changed(struct nvmet_subsys *subsys, struct nvmet_host *host); void nvmet_add_async_event(struct nvmet_ctrl *ctrl, u8 event_type, u8 event_info, u8 log_page); +bool nvmet_subsys_nsid_exists(struct nvmet_subsys *subsys, u32 nsid); #define NVMET_MIN_QUEUE_SIZE 16 #define NVMET_MAX_QUEUE_SIZE 1024 -- cgit v1.2.3 From 50abcc179e0c9ca667feb223b26ea406d5c4c556 Mon Sep 17 00:00:00 2001 From: Hannes Reinecke Date: Thu, 18 Apr 2024 12:39:45 +0200 Subject: nvme-tcp: strict pdu pacing to avoid send stalls on TLS TLS requires a strict pdu pacing via MSG_EOR to signal the end of a record and subsequent encryption. If we do not set MSG_EOR at the end of a sequence the record won't be closed, encryption doesn't start, and we end up with a send stall as the message will never be passed on to the TCP layer. So do not check for the queue status when TLS is enabled but rather make the MSG_MORE setting dependent on the current request only. Signed-off-by: Hannes Reinecke Reviewed-by: Sagi Grimberg Signed-off-by: Keith Busch --- drivers/nvme/host/tcp.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/drivers/nvme/host/tcp.c b/drivers/nvme/host/tcp.c index fdbcdcedcee9..28bc2f373cfa 100644 --- a/drivers/nvme/host/tcp.c +++ b/drivers/nvme/host/tcp.c @@ -360,12 +360,18 @@ static inline void nvme_tcp_send_all(struct nvme_tcp_queue *queue) } while (ret > 0); } -static inline bool nvme_tcp_queue_more(struct nvme_tcp_queue *queue) +static inline bool nvme_tcp_queue_has_pending(struct nvme_tcp_queue *queue) { return !list_empty(&queue->send_list) || !llist_empty(&queue->req_list); } +static inline bool nvme_tcp_queue_more(struct nvme_tcp_queue *queue) +{ + return !nvme_tcp_tls(&queue->ctrl->ctrl) && + nvme_tcp_queue_has_pending(queue); +} + static inline void nvme_tcp_queue_request(struct nvme_tcp_request *req, bool sync, bool last) { @@ -386,7 +392,7 @@ static inline void nvme_tcp_queue_request(struct nvme_tcp_request *req, mutex_unlock(&queue->send_mutex); } - if (last && nvme_tcp_queue_more(queue)) + if (last && nvme_tcp_queue_has_pending(queue)) queue_work_on(queue->io_cpu, nvme_tcp_wq, &queue->io_work); } -- cgit v1.2.3 From ab72d5945d8190f3b9ae16dafcf67655b458bf0e Mon Sep 17 00:00:00 2001 From: Mario Limonciello Date: Tue, 30 Apr 2024 09:53:23 -0500 Subject: drm/amd/display: Disable panel replay by default for now Panel replay was enabled by default in commit 5950efe25ee0 ("drm/amd/display: Enable Panel Replay for static screen use case"), but it isn't working properly at least on some BOE and AUO panels. Instead of being static the screen is solid black when active. As it's a new feature that was just introduced that regressed VRR disable it for now so that problem can be properly root caused. Cc: Tom Chung Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3344 Fixes: 5950efe25ee0 ("drm/amd/display: Enable Panel Replay for static screen use case") Signed-off-by: Mario Limonciello Acked-by: Harry Wentland Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 21 ++++++++++++--------- 1 file changed, 12 insertions(+), 9 deletions(-) diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c index f3f94d109726..d6e71aa808d8 100644 --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c @@ -4537,15 +4537,18 @@ static int amdgpu_dm_initialize_drm_device(struct amdgpu_device *adev) /* Determine whether to enable Replay support by default. */ if (!(amdgpu_dc_debug_mask & DC_DISABLE_REPLAY)) { switch (amdgpu_ip_version(adev, DCE_HWIP, 0)) { - case IP_VERSION(3, 1, 4): - case IP_VERSION(3, 1, 5): - case IP_VERSION(3, 1, 6): - case IP_VERSION(3, 2, 0): - case IP_VERSION(3, 2, 1): - case IP_VERSION(3, 5, 0): - case IP_VERSION(3, 5, 1): - replay_feature_enabled = true; - break; +/* + * Disabled by default due to https://gitlab.freedesktop.org/drm/amd/-/issues/3344 + * case IP_VERSION(3, 1, 4): + * case IP_VERSION(3, 1, 5): + * case IP_VERSION(3, 1, 6): + * case IP_VERSION(3, 2, 0): + * case IP_VERSION(3, 2, 1): + * case IP_VERSION(3, 5, 0): + * case IP_VERSION(3, 5, 1): + * replay_feature_enabled = true; + * break; + */ default: replay_feature_enabled = amdgpu_dc_feature_mask & DC_REPLAY_MASK; break; -- cgit v1.2.3 From 98957360563e7ffdc0c2b3a314655eff8bc1cb5a Mon Sep 17 00:00:00 2001 From: Matthew Auld Date: Tue, 23 Apr 2024 08:47:23 +0100 Subject: drm/xe/vm: prevent UAF in rebind_work_func() We flush the rebind worker during the vm close phase, however in places like preempt_fence_work_func() we seem to queue the rebind worker without first checking if the vm has already been closed. The concern here is the vm being closed with the worker flushed, but then being rearmed later, which looks like potential uaf, since there is no actual refcounting to track the queued worker. We can't take the vm->lock here in preempt_rebind_work_func() to first check if the vm is closed since that will deadlock, so instead flush the worker again when the vm refcount reaches zero. v2: - Grabbing vm->lock in the preempt worker creates a deadlock, so checking the closed state is tricky. Instead flush the worker when the refcount reaches zero. It should be impossible to queue the preempt worker without already holding vm ref. Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs") Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/1676 Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/1591 Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/1364 Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/1304 Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/1249 Signed-off-by: Matthew Auld Cc: Matthew Brost Cc: # v6.8+ Reviewed-by: Matthew Brost Link: https://patchwork.freedesktop.org/patch/msgid/20240423074721.119633-4-matthew.auld@intel.com (cherry picked from commit 3d44d67c441a9fe6f81a1d705f7de009a32a5b35) Signed-off-by: Lucas De Marchi --- drivers/gpu/drm/xe/xe_vm.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/gpu/drm/xe/xe_vm.c b/drivers/gpu/drm/xe/xe_vm.c index 3d4c8f342e21..32cd0c978aa2 100644 --- a/drivers/gpu/drm/xe/xe_vm.c +++ b/drivers/gpu/drm/xe/xe_vm.c @@ -1606,6 +1606,9 @@ static void vm_destroy_work_func(struct work_struct *w) /* xe_vm_close_and_put was not called? */ xe_assert(xe, !vm->size); + if (xe_vm_in_preempt_fence_mode(vm)) + flush_work(&vm->preempt.rebind_work); + mutex_destroy(&vm->snap_mutex); if (!(vm->flags & XE_VM_FLAG_MIGRATION)) -- cgit v1.2.3 From 8f828aa48812ced28aa39cb3cfe55ef2444d03dd Mon Sep 17 00:00:00 2001 From: Nicolas Bouchinet Date: Tue, 30 Apr 2024 13:34:59 +0200 Subject: mm/slub: avoid zeroing outside-object freepointer for single free Commit 284f17ac13fe ("mm/slub: handle bulk and single object freeing separately") splits single and bulk object freeing in two functions slab_free() and slab_free_bulk() which leads slab_free() to call slab_free_hook() directly instead of slab_free_freelist_hook(). If `init_on_free` is set, slab_free_hook() zeroes the object. Afterward, if `slub_debug=F` and `CONFIG_SLAB_FREELIST_HARDENED` are set, the do_slab_free() slowpath executes freelist consistency checks and try to decode a zeroed freepointer which leads to a "Freepointer corrupt" detection in check_object(). During bulk free, slab_free_freelist_hook() isn't affected as it always sets it objects freepointer using set_freepointer() to maintain its reconstructed freelist after `init_on_free`. For single free, object's freepointer thus needs to be avoided when stored outside the object if `init_on_free` is set. The freepointer left as is, check_object() may later detect an invalid pointer value due to objects overflow. To reproduce, set `slub_debug=FU init_on_free=1 log_level=7` on the command line of a kernel build with `CONFIG_SLAB_FREELIST_HARDENED=y`. dmesg sample log: [ 10.708715] ============================================================================= [ 10.710323] BUG kmalloc-rnd-05-32 (Tainted: G B T ): Freepointer corrupt [ 10.712695] ----------------------------------------------------------------------------- [ 10.712695] [ 10.712695] Slab 0xffffd8bdc400d580 objects=32 used=4 fp=0xffff9d9a80356f80 flags=0x200000000000a00(workingset|slab|node=0|zone=2) [ 10.716698] Object 0xffff9d9a80356600 @offset=1536 fp=0x7ee4f480ce0ecd7c [ 10.716698] [ 10.716698] Bytes b4 ffff9d9a803565f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ [ 10.720703] Object ffff9d9a80356600: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ [ 10.720703] Object ffff9d9a80356610: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ [ 10.724696] Padding ffff9d9a8035666c: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ [ 10.724696] Padding ffff9d9a8035667c: 00 00 00 00 .... [ 10.724696] FIX kmalloc-rnd-05-32: Object at 0xffff9d9a80356600 not freed Fixes: 284f17ac13fe ("mm/slub: handle bulk and single object freeing separately") Cc: Co-developed-by: Chengming Zhou Signed-off-by: Chengming Zhou Signed-off-by: Nicolas Bouchinet Signed-off-by: Vlastimil Babka --- mm/slub.c | 52 +++++++++++++++++++++++++++++----------------------- 1 file changed, 29 insertions(+), 23 deletions(-) diff --git a/mm/slub.c b/mm/slub.c index 1bb2a93cf7b6..24f702afd458 100644 --- a/mm/slub.c +++ b/mm/slub.c @@ -557,6 +557,26 @@ static inline void set_freepointer(struct kmem_cache *s, void *object, void *fp) *(freeptr_t *)freeptr_addr = freelist_ptr_encode(s, fp, freeptr_addr); } +/* + * See comment in calculate_sizes(). + */ +static inline bool freeptr_outside_object(struct kmem_cache *s) +{ + return s->offset >= s->inuse; +} + +/* + * Return offset of the end of info block which is inuse + free pointer if + * not overlapping with object. + */ +static inline unsigned int get_info_end(struct kmem_cache *s) +{ + if (freeptr_outside_object(s)) + return s->inuse + sizeof(void *); + else + return s->inuse; +} + /* Loop over all objects in a slab */ #define for_each_object(__p, __s, __addr, __objects) \ for (__p = fixup_red_left(__s, __addr); \ @@ -845,26 +865,6 @@ static void print_section(char *level, char *text, u8 *addr, metadata_access_disable(); } -/* - * See comment in calculate_sizes(). - */ -static inline bool freeptr_outside_object(struct kmem_cache *s) -{ - return s->offset >= s->inuse; -} - -/* - * Return offset of the end of info block which is inuse + free pointer if - * not overlapping with object. - */ -static inline unsigned int get_info_end(struct kmem_cache *s) -{ - if (freeptr_outside_object(s)) - return s->inuse + sizeof(void *); - else - return s->inuse; -} - static struct track *get_track(struct kmem_cache *s, void *object, enum track_item alloc) { @@ -2092,15 +2092,20 @@ bool slab_free_hook(struct kmem_cache *s, void *x, bool init) * * The initialization memset's clear the object and the metadata, * but don't touch the SLAB redzone. + * + * The object's freepointer is also avoided if stored outside the + * object. */ if (unlikely(init)) { int rsize; + unsigned int inuse; + inuse = get_info_end(s); if (!kasan_has_integrated_init()) memset(kasan_reset_tag(x), 0, s->object_size); rsize = (s->flags & SLAB_RED_ZONE) ? s->red_left_pad : 0; - memset((char *)kasan_reset_tag(x) + s->inuse, 0, - s->size - s->inuse - rsize); + memset((char *)kasan_reset_tag(x) + inuse, 0, + s->size - inuse - rsize); } /* KASAN might put x into memory quarantine, delaying its reuse. */ return !kasan_slab_free(s, x, init); @@ -3722,7 +3727,8 @@ static void *__slab_alloc_node(struct kmem_cache *s, static __always_inline void maybe_wipe_obj_freeptr(struct kmem_cache *s, void *obj) { - if (unlikely(slab_want_init_on_free(s)) && obj) + if (unlikely(slab_want_init_on_free(s)) && obj && + !freeptr_outside_object(s)) memset((void *)((char *)kasan_reset_tag(obj) + s->offset), 0, sizeof(void *)); } -- cgit v1.2.3 From cd7eb8f83fcf258f71e293f7fc52a70be8ed0128 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Sun, 28 Apr 2024 17:26:44 +0300 Subject: mm/slab: make __free(kfree) accept error pointers Currently, if an automatically freed allocation is an error pointer that will lead to a crash. An example of this is in wm831x_gpio_dbg_show(). 171 char *label __free(kfree) = gpiochip_dup_line_label(chip, i); 172 if (IS_ERR(label)) { 173 dev_err(wm831x->dev, "Failed to duplicate label\n"); 174 continue; 175 } The auto clean up function should check for error pointers as well, otherwise we're going to keep hitting issues like this. Fixes: 54da6a092431 ("locking: Introduce __cleanup() based infrastructure") Cc: Signed-off-by: Dan Carpenter Acked-by: David Rientjes Signed-off-by: Vlastimil Babka --- include/linux/slab.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/include/linux/slab.h b/include/linux/slab.h index e53cbfa18325..739b21262507 100644 --- a/include/linux/slab.h +++ b/include/linux/slab.h @@ -266,7 +266,7 @@ void kfree(const void *objp); void kfree_sensitive(const void *objp); size_t __ksize(const void *objp); -DEFINE_FREE(kfree, void *, if (_T) kfree(_T)) +DEFINE_FREE(kfree, void *, if (!IS_ERR_OR_NULL(_T)) kfree(_T)) /** * ksize - Report actual allocation size of associated object @@ -792,7 +792,7 @@ static inline __alloc_size(1, 2) void *kvcalloc(size_t n, size_t size, gfp_t fla extern void *kvrealloc(const void *p, size_t oldsize, size_t newsize, gfp_t flags) __realloc_size(3); extern void kvfree(const void *addr); -DEFINE_FREE(kvfree, void *, if (_T) kvfree(_T)) +DEFINE_FREE(kvfree, void *, if (!IS_ERR_OR_NULL(_T)) kvfree(_T)) extern void kvfree_sensitive(const void *addr, size_t len); -- cgit v1.2.3 From fdb3f29dfe0d51bdb8e7b3a6d876ea8339d44df8 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Thu, 2 May 2024 08:24:42 +0200 Subject: ALSA: hda/realtek: Fix build error without CONFIG_PM The alc_spec.power_hook is defined only with CONFIG_PM, and the recent fix overlooked it, resulting in a build error without CONFIG_PM. Fix it with the simple ifdef and set __maybe_unused for the function. We may drop the whole CONFIG_PM dependency there, but it should be done in a separate cleanup patch later. Fixes: 1e707769df07 ("ALSA: hda/realtek - Set GPIO3 to default at S4 state for Thinkpad with ALC1318") Reported-by: kernel test robot Closes: https://lore.kernel.org/oe-kbuild-all/202405012104.Dr7h318W-lkp@intel.com/ Message-ID: <20240502062442.30545-1-tiwai@suse.de> Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index e704425788eb..b29739bd330b 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -7204,7 +7204,7 @@ static void alc287_alc1318_playback_pcm_hook(struct hda_pcm_stream *hinfo, } } -static void alc287_s4_power_gpio3_default(struct hda_codec *codec) +static void __maybe_unused alc287_s4_power_gpio3_default(struct hda_codec *codec) { if (is_s4_suspend(codec)) { alc_write_coef_idx(codec, 0x10, 0x8806); /* Change MLK to GPIO3 */ @@ -7219,7 +7219,9 @@ static void alc287_fixup_lenovo_thinkpad_with_alc1318(struct hda_codec *codec, if (action != HDA_FIXUP_ACT_PRE_PROBE) return; +#ifdef CONFIG_PM spec->power_hook = alc287_s4_power_gpio3_default; +#endif spec->gen.pcm_playback_hook = alc287_alc1318_playback_pcm_hook; } -- cgit v1.2.3 From d43cd48ef1791801c61a54fade4a88d294dedf77 Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Thu, 25 Apr 2024 17:26:17 +0300 Subject: drm/panel: ili9341: Correct use of device property APIs It seems driver missed the point of proper use of device property APIs. Correct this by updating headers and calls respectively. Fixes: 5a04227326b0 ("drm/panel: Add ilitek ili9341 panel driver") Signed-off-by: Andy Shevchenko Reviewed-by: Dmitry Baryshkov Reviewed-by: Neil Armstrong Link: https://lore.kernel.org/r/20240425142706.2440113-2-andriy.shevchenko@linux.intel.com Signed-off-by: Neil Armstrong Link: https://patchwork.freedesktop.org/patch/msgid/20240425142706.2440113-2-andriy.shevchenko@linux.intel.com --- drivers/gpu/drm/panel/Kconfig | 2 +- drivers/gpu/drm/panel/panel-ilitek-ili9341.c | 5 +++-- 2 files changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig index d037b3b8b999..5b15d0294836 100644 --- a/drivers/gpu/drm/panel/Kconfig +++ b/drivers/gpu/drm/panel/Kconfig @@ -177,7 +177,7 @@ config DRM_PANEL_ILITEK_IL9322 config DRM_PANEL_ILITEK_ILI9341 tristate "Ilitek ILI9341 240x320 QVGA panels" - depends on OF && SPI + depends on SPI select DRM_KMS_HELPER select DRM_GEM_DMA_HELPER depends on BACKLIGHT_CLASS_DEVICE diff --git a/drivers/gpu/drm/panel/panel-ilitek-ili9341.c b/drivers/gpu/drm/panel/panel-ilitek-ili9341.c index 3574681891e8..7584ddb0e441 100644 --- a/drivers/gpu/drm/panel/panel-ilitek-ili9341.c +++ b/drivers/gpu/drm/panel/panel-ilitek-ili9341.c @@ -22,8 +22,9 @@ #include #include #include +#include #include -#include +#include #include #include @@ -691,7 +692,7 @@ static int ili9341_dpi_probe(struct spi_device *spi, struct gpio_desc *dc, * Every new incarnation of this display must have a unique * data entry for the system in this driver. */ - ili->conf = of_device_get_match_data(dev); + ili->conf = device_get_match_data(dev); if (!ili->conf) { dev_err(dev, "missing device configuration\n"); return -ENODEV; -- cgit v1.2.3 From 740fc1e0509be3f7e2207e89125b06119ed62943 Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Thu, 25 Apr 2024 17:26:18 +0300 Subject: drm/panel: ili9341: Respect deferred probe GPIO controller might not be available when driver is being probed. There are plenty of reasons why, one of which is deferred probe. Since GPIOs are optional, return any error code we got to the upper layer, including deferred probe. With that in mind, use dev_err_probe() in order to avoid spamming the logs. Fixes: 5a04227326b0 ("drm/panel: Add ilitek ili9341 panel driver") Signed-off-by: Andy Shevchenko Reviewed-by: Dmitry Baryshkov Reviewed-by: Neil Armstrong Reviewed-by: Sui Jingfeng Link: https://lore.kernel.org/r/20240425142706.2440113-3-andriy.shevchenko@linux.intel.com Signed-off-by: Neil Armstrong Link: https://patchwork.freedesktop.org/patch/msgid/20240425142706.2440113-3-andriy.shevchenko@linux.intel.com --- drivers/gpu/drm/panel/panel-ilitek-ili9341.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/panel/panel-ilitek-ili9341.c b/drivers/gpu/drm/panel/panel-ilitek-ili9341.c index 7584ddb0e441..24c74c56e564 100644 --- a/drivers/gpu/drm/panel/panel-ilitek-ili9341.c +++ b/drivers/gpu/drm/panel/panel-ilitek-ili9341.c @@ -715,11 +715,11 @@ static int ili9341_probe(struct spi_device *spi) reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH); if (IS_ERR(reset)) - dev_err(dev, "Failed to get gpio 'reset'\n"); + return dev_err_probe(dev, PTR_ERR(reset), "Failed to get gpio 'reset'\n"); dc = devm_gpiod_get_optional(dev, "dc", GPIOD_OUT_LOW); if (IS_ERR(dc)) - dev_err(dev, "Failed to get gpio 'dc'\n"); + return dev_err_probe(dev, PTR_ERR(dc), "Failed to get gpio 'dc'\n"); if (!strcmp(id->name, "sf-tc240t-9370-t")) return ili9341_dpi_probe(spi, dc, reset); -- cgit v1.2.3 From da85f0aaa9f21999753b01d45c0343f885a8f905 Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Thu, 25 Apr 2024 17:26:19 +0300 Subject: drm/panel: ili9341: Use predefined error codes In one case the -1 is returned which is quite confusing code for the wrong device ID, in another the ret is returning instead of plain 0 that also confusing as readed may ask the possible meaning of positive codes, which are never the case there. Convert both to use explicit predefined error codes to make it clear what's going on there. Fixes: 5a04227326b0 ("drm/panel: Add ilitek ili9341 panel driver") Signed-off-by: Andy Shevchenko Reviewed-by: Neil Armstrong Reviewed-by: Sui Jingfeng Link: https://lore.kernel.org/r/20240425142706.2440113-4-andriy.shevchenko@linux.intel.com Signed-off-by: Neil Armstrong Link: https://patchwork.freedesktop.org/patch/msgid/20240425142706.2440113-4-andriy.shevchenko@linux.intel.com --- drivers/gpu/drm/panel/panel-ilitek-ili9341.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/panel/panel-ilitek-ili9341.c b/drivers/gpu/drm/panel/panel-ilitek-ili9341.c index 24c74c56e564..b933380b7eb7 100644 --- a/drivers/gpu/drm/panel/panel-ilitek-ili9341.c +++ b/drivers/gpu/drm/panel/panel-ilitek-ili9341.c @@ -422,7 +422,7 @@ static int ili9341_dpi_prepare(struct drm_panel *panel) ili9341_dpi_init(ili); - return ret; + return 0; } static int ili9341_dpi_enable(struct drm_panel *panel) @@ -726,7 +726,7 @@ static int ili9341_probe(struct spi_device *spi) else if (!strcmp(id->name, "yx240qv29")) return ili9341_dbi_probe(spi, dc, reset); - return -1; + return -ENODEV; } static void ili9341_remove(struct spi_device *spi) -- cgit v1.2.3 From 75961ffb5cb3e5196f19cae7683f35cc88b50800 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Thu, 2 May 2024 10:37:23 +0100 Subject: swiotlb: initialise restricted pool list_head when SWIOTLB_DYNAMIC=y Using restricted DMA pools (CONFIG_DMA_RESTRICTED_POOL=y) in conjunction with dynamic SWIOTLB (CONFIG_SWIOTLB_DYNAMIC=y) leads to the following crash when initialising the restricted pools at boot-time: | Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008 | Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP | pc : rmem_swiotlb_device_init+0xfc/0x1ec | lr : rmem_swiotlb_device_init+0xf0/0x1ec | Call trace: | rmem_swiotlb_device_init+0xfc/0x1ec | of_reserved_mem_device_init_by_idx+0x18c/0x238 | of_dma_configure_id+0x31c/0x33c | platform_dma_configure+0x34/0x80 faddr2line reveals that the crash is in the list validation code: include/linux/list.h:83 include/linux/rculist.h:79 include/linux/rculist.h:106 kernel/dma/swiotlb.c:306 kernel/dma/swiotlb.c:1695 because add_mem_pool() is trying to list_add_rcu() to a NULL 'mem->pools'. Fix the crash by initialising the 'mem->pools' list_head in rmem_swiotlb_device_init() before calling add_mem_pool(). Reported-by: Nikita Ioffe Tested-by: Nikita Ioffe Fixes: 1aaa736815eb ("swiotlb: allocate a new memory pool when existing pools are full") Signed-off-by: Will Deacon Signed-off-by: Christoph Hellwig --- kernel/dma/swiotlb.c | 1 + 1 file changed, 1 insertion(+) diff --git a/kernel/dma/swiotlb.c b/kernel/dma/swiotlb.c index a5e0dfc44d24..0de66f0ff43a 100644 --- a/kernel/dma/swiotlb.c +++ b/kernel/dma/swiotlb.c @@ -1798,6 +1798,7 @@ static int rmem_swiotlb_device_init(struct reserved_mem *rmem, mem->for_alloc = true; #ifdef CONFIG_SWIOTLB_DYNAMIC spin_lock_init(&mem->lock); + INIT_LIST_HEAD_RCU(&mem->pools); #endif add_mem_pool(mem, pool); -- cgit v1.2.3 From 8a95db3bf8a32186fe448b1a934afbd5f1da0263 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Thu, 2 May 2024 16:39:47 +0200 Subject: x86/xen/smp_pv: Register the boot CPU APIC properly The topology core expects the boot APIC to be registered from earhy APIC detection first and then again when the firmware tables are evaluated. This is used for detecting the real BSP CPU on a kexec kernel. The recent conversion of XEN/PV to register fake APIC IDs failed to register the boot CPU APIC correctly as it only registers it once. This causes the BSP detection mechanism to trigger wrongly: CPU topo: Boot CPU APIC ID not the first enumerated APIC ID: 0 > 1 Additionally this results in one CPU being ignored. Register the boot CPU APIC twice so that the XEN/PV fake enumeration behaves like real firmware. Reported-by: Juergen Gross Fixes: e75307023466 ("x86/xen/smp_pv: Register fake APICs") Signed-off-by: Thomas Gleixner Tested-by: Juergen Gross Reviewed-by: Juergen Gross Link: https://lore.kernel.org/r/87a5l8s2fg.ffs@tglx Signed-off-by: Juergen Gross --- arch/x86/xen/smp_pv.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/x86/xen/smp_pv.c b/arch/x86/xen/smp_pv.c index 27d1a5b7f571..ac41d83b38d3 100644 --- a/arch/x86/xen/smp_pv.c +++ b/arch/x86/xen/smp_pv.c @@ -154,9 +154,9 @@ static void __init xen_pv_smp_config(void) u32 apicid = 0; int i; - topology_register_boot_apic(apicid++); + topology_register_boot_apic(apicid); - for (i = 1; i < nr_cpu_ids; i++) + for (i = 0; i < nr_cpu_ids; i++) topology_register_apic(apicid++, CPU_ACPIID_INVALID, true); /* Pretend to be a proper enumerated system */ -- cgit v1.2.3 From df04b152fca2d46e75fbb74ed79299bc420bc9e6 Mon Sep 17 00:00:00 2001 From: Lucas De Marchi Date: Thu, 25 Apr 2024 11:16:09 -0700 Subject: drm/xe/display: Fix ADL-N detection Contrary to i915, in xe ADL-N is kept as a different platform, not a subplatform of ADL-P. Since the display side doesn't need to differentiate between P and N, i.e. IS_ALDERLAKE_P_N() is never called, just fixup the compat header to check for both P and N. Moving ADL-N to be a subplatform would be more complex as the firmware loading in xe only handles platforms, not subplatforms, as going forward the direction is to check on IP version rather than platforms/subplatforms. Fix warning when initializing display: xe 0000:00:02.0: [drm:intel_pch_type [xe]] Found Alder Lake PCH ------------[ cut here ]------------ xe 0000:00:02.0: drm_WARN_ON(!((dev_priv)->info.platform == XE_ALDERLAKE_S) && !((dev_priv)->info.platform == XE_ALDERLAKE_P)) And wrong paths being taken on the display side. Reviewed-by: Matt Roper Acked-by: Jani Nikula Link: https://patchwork.freedesktop.org/patch/msgid/20240425181610.2704633-1-lucas.demarchi@intel.com Signed-off-by: Lucas De Marchi (cherry picked from commit 6a2a90cba12b42eb96c2af3426b77ceb4be31df2) Fixes: 44e694958b95 ("drm/xe/display: Implement display support") Signed-off-by: Lucas De Marchi --- drivers/gpu/drm/xe/compat-i915-headers/i915_drv.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/xe/compat-i915-headers/i915_drv.h b/drivers/gpu/drm/xe/compat-i915-headers/i915_drv.h index 420eba0e4be0..854a7bb53567 100644 --- a/drivers/gpu/drm/xe/compat-i915-headers/i915_drv.h +++ b/drivers/gpu/drm/xe/compat-i915-headers/i915_drv.h @@ -84,7 +84,8 @@ static inline struct drm_i915_private *kdev_to_i915(struct device *kdev) #define IS_ROCKETLAKE(dev_priv) IS_PLATFORM(dev_priv, XE_ROCKETLAKE) #define IS_DG1(dev_priv) IS_PLATFORM(dev_priv, XE_DG1) #define IS_ALDERLAKE_S(dev_priv) IS_PLATFORM(dev_priv, XE_ALDERLAKE_S) -#define IS_ALDERLAKE_P(dev_priv) IS_PLATFORM(dev_priv, XE_ALDERLAKE_P) +#define IS_ALDERLAKE_P(dev_priv) (IS_PLATFORM(dev_priv, XE_ALDERLAKE_P) || \ + IS_PLATFORM(dev_priv, XE_ALDERLAKE_N)) #define IS_XEHPSDV(dev_priv) (dev_priv && 0) #define IS_DG2(dev_priv) IS_PLATFORM(dev_priv, XE_DG2) #define IS_PONTEVECCHIO(dev_priv) IS_PLATFORM(dev_priv, XE_PVC) -- cgit v1.2.3 From 802600ebdf23371b893a51a4ad046213f112ea3b Mon Sep 17 00:00:00 2001 From: Juergen Gross Date: Fri, 5 Apr 2024 14:15:47 +0200 Subject: x86/xen: return a sane initial apic id when running as PV guest With recent sanity checks for topology information added, there are now warnings issued for APs when running as a Xen PV guest: [Firmware Bug]: CPU 1: APIC ID mismatch. CPUID: 0x0000 APIC: 0x0001 This is due to the initial APIC ID obtained via CPUID for PV guests is always 0. Avoid the warnings by synthesizing the CPUID data to contain the same initial APIC ID as xen_pv_smp_config() is using for registering the APIC IDs of all CPUs. Fixes: 52128a7a21f7 ("86/cpu/topology: Make the APIC mismatch warnings complete") Signed-off-by: Juergen Gross --- arch/x86/xen/enlighten_pv.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) diff --git a/arch/x86/xen/enlighten_pv.c b/arch/x86/xen/enlighten_pv.c index ace2eb054053..9ba53814ed6a 100644 --- a/arch/x86/xen/enlighten_pv.c +++ b/arch/x86/xen/enlighten_pv.c @@ -219,13 +219,21 @@ static __read_mostly unsigned int cpuid_leaf5_edx_val; static void xen_cpuid(unsigned int *ax, unsigned int *bx, unsigned int *cx, unsigned int *dx) { - unsigned maskebx = ~0; + unsigned int maskebx = ~0; + unsigned int or_ebx = 0; /* * Mask out inconvenient features, to try and disable as many * unsupported kernel subsystems as possible. */ switch (*ax) { + case 0x1: + /* Replace initial APIC ID in bits 24-31 of EBX. */ + /* See xen_pv_smp_config() for related topology preparations. */ + maskebx = 0x00ffffff; + or_ebx = smp_processor_id() << 24; + break; + case CPUID_MWAIT_LEAF: /* Synthesize the values.. */ *ax = 0; @@ -248,6 +256,7 @@ static void xen_cpuid(unsigned int *ax, unsigned int *bx, : "0" (*ax), "2" (*cx)); *bx &= maskebx; + *bx |= or_ebx; } static bool __init xen_check_mwait(void) -- cgit v1.2.3 From b5357cb268c41b4e2b7383d2759fc562f5b58c33 Mon Sep 17 00:00:00 2001 From: Qu Wenruo Date: Sat, 20 Apr 2024 17:20:27 +0930 Subject: btrfs: qgroup: do not check qgroup inherit if qgroup is disabled [BUG] After kernel commit 86211eea8ae1 ("btrfs: qgroup: validate btrfs_qgroup_inherit parameter"), user space tool snapper will fail to create snapshot using its timeline feature. [CAUSE] It turns out that, if using timeline snapper would unconditionally pass btrfs_qgroup_inherit parameter (assigning the new snapshot to qgroup 1/0) for snapshot creation. In that case, since qgroup is disabled there would be no qgroup 1/0, and btrfs_qgroup_check_inherit() would return -ENOENT and fail the whole snapshot creation. [FIX] Just skip the check if qgroup is not enabled. This is to keep the older behavior for user space tools, as if the kernel behavior changed for user space, it is a regression of kernel. Thankfully snapper is also fixing the behavior by detecting if qgroup is running in the first place, so the effect should not be that huge. Link: https://github.com/openSUSE/snapper/issues/894 Fixes: 86211eea8ae1 ("btrfs: qgroup: validate btrfs_qgroup_inherit parameter") CC: stable@vger.kernel.org # 6.8+ Reviewed-by: Filipe Manana Signed-off-by: Qu Wenruo Reviewed-by: David Sterba Signed-off-by: David Sterba --- fs/btrfs/qgroup.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/fs/btrfs/qgroup.c b/fs/btrfs/qgroup.c index 364acc9bbe73..40e5f7f2fcb7 100644 --- a/fs/btrfs/qgroup.c +++ b/fs/btrfs/qgroup.c @@ -3045,6 +3045,8 @@ int btrfs_qgroup_check_inherit(struct btrfs_fs_info *fs_info, struct btrfs_qgroup_inherit *inherit, size_t size) { + if (!btrfs_qgroup_enabled(fs_info)) + return 0; if (inherit->flags & ~BTRFS_QGROUP_INHERIT_FLAGS_SUPP) return -EOPNOTSUPP; if (size < sizeof(*inherit) || size > PAGE_SIZE) -- cgit v1.2.3 From e03418abde871314e1a3a550f4c8afb7b89cb273 Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Mon, 29 Apr 2024 09:03:35 -0400 Subject: btrfs: make sure that WRITTEN is set on all metadata blocks We previously would call btrfs_check_leaf() if we had the check integrity code enabled, which meant that we could only run the extended leaf checks if we had WRITTEN set on the header flags. This leaves a gap in our checking, because we could end up with corruption on disk where WRITTEN isn't set on the leaf, and then the extended leaf checks don't get run which we rely on to validate all of the item pointers to make sure we don't access memory outside of the extent buffer. However, since 732fab95abe2 ("btrfs: check-integrity: remove CONFIG_BTRFS_FS_CHECK_INTEGRITY option") we no longer call btrfs_check_leaf() from btrfs_mark_buffer_dirty(), which means we only ever call it on blocks that are being written out, and thus have WRITTEN set, or that are being read in, which should have WRITTEN set. Add checks to make sure we have WRITTEN set appropriately, and then make sure __btrfs_check_leaf() always does the item checking. This will protect us from file systems that have been corrupted and no longer have WRITTEN set on some of the blocks. This was hit on a crafted image tweaking the WRITTEN bit and reported by KASAN as out-of-bound access in the eb accessors. The example is a dir item at the end of an eb. [2.042] BTRFS warning (device loop1): bad eb member start: ptr 0x3fff start 30572544 member offset 16410 size 2 [2.040] general protection fault, probably for non-canonical address 0xe0009d1000000003: 0000 [#1] PREEMPT SMP KASAN NOPTI [2.537] KASAN: maybe wild-memory-access in range [0x0005088000000018-0x000508800000001f] [2.729] CPU: 0 PID: 2587 Comm: mount Not tainted 6.8.2 #1 [2.729] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 [2.621] RIP: 0010:btrfs_get_16+0x34b/0x6d0 [2.621] RSP: 0018:ffff88810871fab8 EFLAGS: 00000206 [2.621] RAX: 0000a11000000003 RBX: ffff888104ff8720 RCX: ffff88811b2288c0 [2.621] RDX: dffffc0000000000 RSI: ffffffff81dd8aca RDI: ffff88810871f748 [2.621] RBP: 000000000000401a R08: 0000000000000001 R09: ffffed10210e3ee9 [2.621] R10: ffff88810871f74f R11: 205d323430333737 R12: 000000000000001a [2.621] R13: 000508800000001a R14: 1ffff110210e3f5d R15: ffffffff850011e8 [2.621] FS: 00007f56ea275840(0000) GS:ffff88811b200000(0000) knlGS:0000000000000000 [2.621] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [2.621] CR2: 00007febd13b75c0 CR3: 000000010bb50000 CR4: 00000000000006f0 [2.621] Call Trace: [2.621] [2.621] ? show_regs+0x74/0x80 [2.621] ? die_addr+0x46/0xc0 [2.621] ? exc_general_protection+0x161/0x2a0 [2.621] ? asm_exc_general_protection+0x26/0x30 [2.621] ? btrfs_get_16+0x33a/0x6d0 [2.621] ? btrfs_get_16+0x34b/0x6d0 [2.621] ? btrfs_get_16+0x33a/0x6d0 [2.621] ? __pfx_btrfs_get_16+0x10/0x10 [2.621] ? __pfx_mutex_unlock+0x10/0x10 [2.621] btrfs_match_dir_item_name+0x101/0x1a0 [2.621] btrfs_lookup_dir_item+0x1f3/0x280 [2.621] ? __pfx_btrfs_lookup_dir_item+0x10/0x10 [2.621] btrfs_get_tree+0xd25/0x1910 Reported-by: lei lu CC: stable@vger.kernel.org # 6.7+ Reviewed-by: Qu Wenruo Signed-off-by: Josef Bacik Reviewed-by: David Sterba [ copy more details from report ] Signed-off-by: David Sterba --- fs/btrfs/tree-checker.c | 30 +++++++++++++++--------------- fs/btrfs/tree-checker.h | 1 + 2 files changed, 16 insertions(+), 15 deletions(-) diff --git a/fs/btrfs/tree-checker.c b/fs/btrfs/tree-checker.c index c8fbcae4e88e..32604e9b31c3 100644 --- a/fs/btrfs/tree-checker.c +++ b/fs/btrfs/tree-checker.c @@ -1797,6 +1797,11 @@ enum btrfs_tree_block_status __btrfs_check_leaf(struct extent_buffer *leaf) return BTRFS_TREE_BLOCK_INVALID_LEVEL; } + if (unlikely(!btrfs_header_flag(leaf, BTRFS_HEADER_FLAG_WRITTEN))) { + generic_err(leaf, 0, "invalid flag for leaf, WRITTEN not set"); + return BTRFS_TREE_BLOCK_WRITTEN_NOT_SET; + } + /* * Extent buffers from a relocation tree have a owner field that * corresponds to the subvolume tree they are based on. So just from an @@ -1858,6 +1863,7 @@ enum btrfs_tree_block_status __btrfs_check_leaf(struct extent_buffer *leaf) for (slot = 0; slot < nritems; slot++) { u32 item_end_expected; u64 item_data_end; + enum btrfs_tree_block_status ret; btrfs_item_key_to_cpu(leaf, &key, slot); @@ -1913,21 +1919,10 @@ enum btrfs_tree_block_status __btrfs_check_leaf(struct extent_buffer *leaf) return BTRFS_TREE_BLOCK_INVALID_OFFSETS; } - /* - * We only want to do this if WRITTEN is set, otherwise the leaf - * may be in some intermediate state and won't appear valid. - */ - if (btrfs_header_flag(leaf, BTRFS_HEADER_FLAG_WRITTEN)) { - enum btrfs_tree_block_status ret; - - /* - * Check if the item size and content meet other - * criteria - */ - ret = check_leaf_item(leaf, &key, slot, &prev_key); - if (unlikely(ret != BTRFS_TREE_BLOCK_CLEAN)) - return ret; - } + /* Check if the item size and content meet other criteria. */ + ret = check_leaf_item(leaf, &key, slot, &prev_key); + if (unlikely(ret != BTRFS_TREE_BLOCK_CLEAN)) + return ret; prev_key.objectid = key.objectid; prev_key.type = key.type; @@ -1957,6 +1952,11 @@ enum btrfs_tree_block_status __btrfs_check_node(struct extent_buffer *node) int level = btrfs_header_level(node); u64 bytenr; + if (unlikely(!btrfs_header_flag(node, BTRFS_HEADER_FLAG_WRITTEN))) { + generic_err(node, 0, "invalid flag for node, WRITTEN not set"); + return BTRFS_TREE_BLOCK_WRITTEN_NOT_SET; + } + if (unlikely(level <= 0 || level >= BTRFS_MAX_LEVEL)) { generic_err(node, 0, "invalid level for node, have %d expect [1, %d]", diff --git a/fs/btrfs/tree-checker.h b/fs/btrfs/tree-checker.h index 5c809b50b2d0..01669cfa6578 100644 --- a/fs/btrfs/tree-checker.h +++ b/fs/btrfs/tree-checker.h @@ -53,6 +53,7 @@ enum btrfs_tree_block_status { BTRFS_TREE_BLOCK_INVALID_BLOCKPTR, BTRFS_TREE_BLOCK_INVALID_ITEM, BTRFS_TREE_BLOCK_INVALID_OWNER, + BTRFS_TREE_BLOCK_WRITTEN_NOT_SET, }; /* -- cgit v1.2.3 From 94062790aedb505bdda209b10bea47b294d6394f Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Wed, 1 May 2024 12:54:48 +0000 Subject: tcp: defer shutdown(SEND_SHUTDOWN) for TCP_SYN_RECV sockets TCP_SYN_RECV state is really special, it is only used by cross-syn connections, mostly used by fuzzers. In the following crash [1], syzbot managed to trigger a divide by zero in tcp_rcv_space_adjust() A socket makes the following state transitions, without ever calling tcp_init_transfer(), meaning tcp_init_buffer_space() is also not called. TCP_CLOSE connect() TCP_SYN_SENT TCP_SYN_RECV shutdown() -> tcp_shutdown(sk, SEND_SHUTDOWN) TCP_FIN_WAIT1 To fix this issue, change tcp_shutdown() to not perform a TCP_SYN_RECV -> TCP_FIN_WAIT1 transition, which makes no sense anyway. When tcp_rcv_state_process() later changes socket state from TCP_SYN_RECV to TCP_ESTABLISH, then look at sk->sk_shutdown to finally enter TCP_FIN_WAIT1 state, and send a FIN packet from a sane socket state. This means tcp_send_fin() can now be called from BH context, and must use GFP_ATOMIC allocations. [1] divide error: 0000 [#1] PREEMPT SMP KASAN NOPTI CPU: 1 PID: 5084 Comm: syz-executor358 Not tainted 6.9.0-rc6-syzkaller-00022-g98369dccd2f8 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024 RIP: 0010:tcp_rcv_space_adjust+0x2df/0x890 net/ipv4/tcp_input.c:767 Code: e3 04 4c 01 eb 48 8b 44 24 38 0f b6 04 10 84 c0 49 89 d5 0f 85 a5 03 00 00 41 8b 8e c8 09 00 00 89 e8 29 c8 48 0f af c3 31 d2 <48> f7 f1 48 8d 1c 43 49 8d 96 76 08 00 00 48 89 d0 48 c1 e8 03 48 RSP: 0018:ffffc900031ef3f0 EFLAGS: 00010246 RAX: 0c677a10441f8f42 RBX: 000000004fb95e7e RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: 0000000027d4b11f R08: ffffffff89e535a4 R09: 1ffffffff25e6ab7 R10: dffffc0000000000 R11: ffffffff8135e920 R12: ffff88802a9f8d30 R13: dffffc0000000000 R14: ffff88802a9f8d00 R15: 1ffff1100553f2da FS: 00005555775c0380(0000) GS:ffff8880b9500000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f1155bf2304 CR3: 000000002b9f2000 CR4: 0000000000350ef0 Call Trace: tcp_recvmsg_locked+0x106d/0x25a0 net/ipv4/tcp.c:2513 tcp_recvmsg+0x25d/0x920 net/ipv4/tcp.c:2578 inet6_recvmsg+0x16a/0x730 net/ipv6/af_inet6.c:680 sock_recvmsg_nosec net/socket.c:1046 [inline] sock_recvmsg+0x109/0x280 net/socket.c:1068 ____sys_recvmsg+0x1db/0x470 net/socket.c:2803 ___sys_recvmsg net/socket.c:2845 [inline] do_recvmmsg+0x474/0xae0 net/socket.c:2939 __sys_recvmmsg net/socket.c:3018 [inline] __do_sys_recvmmsg net/socket.c:3041 [inline] __se_sys_recvmmsg net/socket.c:3034 [inline] __x64_sys_recvmmsg+0x199/0x250 net/socket.c:3034 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf5/0x240 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7faeb6363db9 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 c1 17 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007ffcc1997168 EFLAGS: 00000246 ORIG_RAX: 000000000000012b RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007faeb6363db9 RDX: 0000000000000001 RSI: 0000000020000bc0 RDI: 0000000000000005 RBP: 0000000000000000 R08: 0000000000000000 R09: 000000000000001c R10: 0000000000000122 R11: 0000000000000246 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000001 R15: 0000000000000001 Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: syzbot Signed-off-by: Eric Dumazet Acked-by: Neal Cardwell Link: https://lore.kernel.org/r/20240501125448.896529-1-edumazet@google.com Signed-off-by: Jakub Kicinski --- net/ipv4/tcp.c | 4 ++-- net/ipv4/tcp_input.c | 2 ++ net/ipv4/tcp_output.c | 4 +++- 3 files changed, 7 insertions(+), 3 deletions(-) diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c index e767721b3a58..66d77faca64f 100644 --- a/net/ipv4/tcp.c +++ b/net/ipv4/tcp.c @@ -2710,7 +2710,7 @@ void tcp_shutdown(struct sock *sk, int how) /* If we've already sent a FIN, or it's a closed state, skip this. */ if ((1 << sk->sk_state) & (TCPF_ESTABLISHED | TCPF_SYN_SENT | - TCPF_SYN_RECV | TCPF_CLOSE_WAIT)) { + TCPF_CLOSE_WAIT)) { /* Clear out any half completed packets. FIN if needed. */ if (tcp_close_state(sk)) tcp_send_fin(sk); @@ -2819,7 +2819,7 @@ void __tcp_close(struct sock *sk, long timeout) * machine. State transitions: * * TCP_ESTABLISHED -> TCP_FIN_WAIT1 - * TCP_SYN_RECV -> TCP_FIN_WAIT1 (forget it, it's impossible) + * TCP_SYN_RECV -> TCP_FIN_WAIT1 (it is difficult) * TCP_CLOSE_WAIT -> TCP_LAST_ACK * * are legal only when FIN has been sent (i.e. in window), diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c index 5d874817a78d..a140d9f7a0a3 100644 --- a/net/ipv4/tcp_input.c +++ b/net/ipv4/tcp_input.c @@ -6761,6 +6761,8 @@ tcp_rcv_state_process(struct sock *sk, struct sk_buff *skb) tcp_initialize_rcv_mss(sk); tcp_fast_path_on(tp); + if (sk->sk_shutdown & SEND_SHUTDOWN) + tcp_shutdown(sk, SEND_SHUTDOWN); break; case TCP_FIN_WAIT1: { diff --git a/net/ipv4/tcp_output.c b/net/ipv4/tcp_output.c index e3167ad96567..02caeb7bcf63 100644 --- a/net/ipv4/tcp_output.c +++ b/net/ipv4/tcp_output.c @@ -3563,7 +3563,9 @@ void tcp_send_fin(struct sock *sk) return; } } else { - skb = alloc_skb_fclone(MAX_TCP_HEADER, sk->sk_allocation); + skb = alloc_skb_fclone(MAX_TCP_HEADER, + sk_gfp_mask(sk, GFP_ATOMIC | + __GFP_NOWARN)); if (unlikely(!skb)) return; -- cgit v1.2.3 From f2db7230f73a80dbb179deab78f88a7947f0ab7e Mon Sep 17 00:00:00 2001 From: Kuniyuki Iwashima Date: Wed, 1 May 2024 14:31:45 -0700 Subject: tcp: Use refcount_inc_not_zero() in tcp_twsk_unique(). Anderson Nascimento reported a use-after-free splat in tcp_twsk_unique() with nice analysis. Since commit ec94c2696f0b ("tcp/dccp: avoid one atomic operation for timewait hashdance"), inet_twsk_hashdance() sets TIME-WAIT socket's sk_refcnt after putting it into ehash and releasing the bucket lock. Thus, there is a small race window where other threads could try to reuse the port during connect() and call sock_hold() in tcp_twsk_unique() for the TIME-WAIT socket with zero refcnt. If that happens, the refcnt taken by tcp_twsk_unique() is overwritten and sock_put() will cause underflow, triggering a real use-after-free somewhere else. To avoid the use-after-free, we need to use refcount_inc_not_zero() in tcp_twsk_unique() and give up on reusing the port if it returns false. [0]: refcount_t: addition on 0; use-after-free. WARNING: CPU: 0 PID: 1039313 at lib/refcount.c:25 refcount_warn_saturate+0xe5/0x110 CPU: 0 PID: 1039313 Comm: trigger Not tainted 6.8.6-200.fc39.x86_64 #1 Hardware name: VMware, Inc. VMware20,1/440BX Desktop Reference Platform, BIOS VMW201.00V.21805430.B64.2305221830 05/22/2023 RIP: 0010:refcount_warn_saturate+0xe5/0x110 Code: 42 8e ff 0f 0b c3 cc cc cc cc 80 3d aa 13 ea 01 00 0f 85 5e ff ff ff 48 c7 c7 f8 8e b7 82 c6 05 96 13 ea 01 01 e8 7b 42 8e ff <0f> 0b c3 cc cc cc cc 48 c7 c7 50 8f b7 82 c6 05 7a 13 ea 01 01 e8 RSP: 0018:ffffc90006b43b60 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffff888009bb3ef0 RCX: 0000000000000027 RDX: ffff88807be218c8 RSI: 0000000000000001 RDI: ffff88807be218c0 RBP: 0000000000069d70 R08: 0000000000000000 R09: ffffc90006b439f0 R10: ffffc90006b439e8 R11: 0000000000000003 R12: ffff8880029ede84 R13: 0000000000004e20 R14: ffffffff84356dc0 R15: ffff888009bb3ef0 FS: 00007f62c10926c0(0000) GS:ffff88807be00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020ccb000 CR3: 000000004628c005 CR4: 0000000000f70ef0 PKRU: 55555554 Call Trace: ? refcount_warn_saturate+0xe5/0x110 ? __warn+0x81/0x130 ? refcount_warn_saturate+0xe5/0x110 ? report_bug+0x171/0x1a0 ? refcount_warn_saturate+0xe5/0x110 ? handle_bug+0x3c/0x80 ? exc_invalid_op+0x17/0x70 ? asm_exc_invalid_op+0x1a/0x20 ? refcount_warn_saturate+0xe5/0x110 tcp_twsk_unique+0x186/0x190 __inet_check_established+0x176/0x2d0 __inet_hash_connect+0x74/0x7d0 ? __pfx___inet_check_established+0x10/0x10 tcp_v4_connect+0x278/0x530 __inet_stream_connect+0x10f/0x3d0 inet_stream_connect+0x3a/0x60 __sys_connect+0xa8/0xd0 __x64_sys_connect+0x18/0x20 do_syscall_64+0x83/0x170 entry_SYSCALL_64_after_hwframe+0x78/0x80 RIP: 0033:0x7f62c11a885d Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d a3 45 0c 00 f7 d8 64 89 01 48 RSP: 002b:00007f62c1091e58 EFLAGS: 00000296 ORIG_RAX: 000000000000002a RAX: ffffffffffffffda RBX: 0000000020ccb004 RCX: 00007f62c11a885d RDX: 0000000000000010 RSI: 0000000020ccb000 RDI: 0000000000000003 RBP: 00007f62c1091e90 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000296 R12: 00007f62c10926c0 R13: ffffffffffffff88 R14: 0000000000000000 R15: 00007ffe237885b0 Fixes: ec94c2696f0b ("tcp/dccp: avoid one atomic operation for timewait hashdance") Reported-by: Anderson Nascimento Closes: https://lore.kernel.org/netdev/37a477a6-d39e-486b-9577-3463f655a6b7@allelesecurity.com/ Suggested-by: Eric Dumazet Signed-off-by: Kuniyuki Iwashima Reviewed-by: Eric Dumazet Link: https://lore.kernel.org/r/20240501213145.62261-1-kuniyu@amazon.com Signed-off-by: Jakub Kicinski --- net/ipv4/tcp_ipv4.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/net/ipv4/tcp_ipv4.c b/net/ipv4/tcp_ipv4.c index a22ee5838751..e0cef75f85fb 100644 --- a/net/ipv4/tcp_ipv4.c +++ b/net/ipv4/tcp_ipv4.c @@ -154,6 +154,12 @@ int tcp_twsk_unique(struct sock *sk, struct sock *sktw, void *twp) if (tcptw->tw_ts_recent_stamp && (!twp || (reuse && time_after32(ktime_get_seconds(), tcptw->tw_ts_recent_stamp)))) { + /* inet_twsk_hashdance() sets sk_refcnt after putting twsk + * and releasing the bucket lock. + */ + if (unlikely(!refcount_inc_not_zero(&sktw->sk_refcnt))) + return 0; + /* In case of repair and re-using TIME-WAIT sockets we still * want to be sure that it is safe as above but honor the * sequence numbers and time stamps set as part of the repair @@ -174,7 +180,7 @@ int tcp_twsk_unique(struct sock *sk, struct sock *sktw, void *twp) tp->rx_opt.ts_recent = tcptw->tw_ts_recent; tp->rx_opt.ts_recent_stamp = tcptw->tw_ts_recent_stamp; } - sock_hold(sktw); + return 1; } -- cgit v1.2.3 From 98241a774db49988f25b7b3657026ce51ccec293 Mon Sep 17 00:00:00 2001 From: Viken Dadhaniya Date: Tue, 30 Apr 2024 10:12:38 +0100 Subject: slimbus: qcom-ngd-ctrl: Add timeout for wait operation In current driver qcom_slim_ngd_up_worker() indefinitely waiting for ctrl->qmi_up completion object. This is resulting in workqueue lockup on Kthread. Added wait_for_completion_interruptible_timeout to allow the thread to wait for specific timeout period and bail out instead waiting infinitely. Fixes: a899d324863a ("slimbus: qcom-ngd-ctrl: add Sub System Restart support") Cc: stable@vger.kernel.org Reviewed-by: Konrad Dybcio Signed-off-by: Viken Dadhaniya Signed-off-by: Srinivas Kandagatla Link: https://lore.kernel.org/r/20240430091238.35209-2-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman --- drivers/slimbus/qcom-ngd-ctrl.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/slimbus/qcom-ngd-ctrl.c b/drivers/slimbus/qcom-ngd-ctrl.c index efeba8275a66..a09a26bf4988 100644 --- a/drivers/slimbus/qcom-ngd-ctrl.c +++ b/drivers/slimbus/qcom-ngd-ctrl.c @@ -1451,7 +1451,11 @@ static void qcom_slim_ngd_up_worker(struct work_struct *work) ctrl = container_of(work, struct qcom_slim_ngd_ctrl, ngd_up_work); /* Make sure qmi service is up before continuing */ - wait_for_completion_interruptible(&ctrl->qmi_up); + if (!wait_for_completion_interruptible_timeout(&ctrl->qmi_up, + msecs_to_jiffies(MSEC_PER_SEC))) { + dev_err(ctrl->dev, "QMI wait timeout\n"); + return; + } mutex_lock(&ctrl->ssr_lock); qcom_slim_ngd_enable(ctrl, true); -- cgit v1.2.3 From 2e0239d47d75e08f9a39f8360610e490c39ea696 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Mon, 29 Apr 2024 14:18:21 -0500 Subject: PCI/ASPM: Clarify that pcie_aspm=off means leave ASPM untouched Previously we claimed "pcie_aspm=off" meant that ASPM would be disabled, which is wrong. Correct this to say that with "pcie_aspm=off", Linux doesn't touch any ASPM configuration at all. ASPM may have been enabled by firmware, and that will be left unchanged. See "aspm_support_enabled". Link: https://lore.kernel.org/r/20240429191821.691726-1-helgaas@kernel.org Signed-off-by: Bjorn Helgaas Reviewed-by: David E. Box --- Documentation/admin-guide/kernel-parameters.txt | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt index bb884c14b2f6..4bc281d6e8d3 100644 --- a/Documentation/admin-guide/kernel-parameters.txt +++ b/Documentation/admin-guide/kernel-parameters.txt @@ -4590,9 +4590,10 @@ norid [S390] ignore the RID field and force use of one PCI domain per PCI function - pcie_aspm= [PCIE] Forcibly enable or disable PCIe Active State Power + pcie_aspm= [PCIE] Forcibly enable or ignore PCIe Active State Power Management. - off Disable ASPM. + off Don't touch ASPM configuration at all. Leave any + configuration done by firmware unchanged. force Enable ASPM even on devices that claim not to support it. WARNING: Forcing ASPM on may cause system lockups. -- cgit v1.2.3 From 483bc08181827fc475643272ffb69c533007e546 Mon Sep 17 00:00:00 2001 From: Duoming Zhou Date: Thu, 25 Apr 2024 22:23:45 +0800 Subject: Bluetooth: Fix use-after-free bugs caused by sco_sock_timeout When the sco connection is established and then, the sco socket is releasing, timeout_work will be scheduled to judge whether the sco disconnection is timeout. The sock will be deallocated later, but it is dereferenced again in sco_sock_timeout. As a result, the use-after-free bugs will happen. The root cause is shown below: Cleanup Thread | Worker Thread sco_sock_release | sco_sock_close | __sco_sock_close | sco_sock_set_timer | schedule_delayed_work | sco_sock_kill | (wait a time) sock_put(sk) //FREE | sco_sock_timeout | sock_hold(sk) //USE The KASAN report triggered by POC is shown below: [ 95.890016] ================================================================== [ 95.890496] BUG: KASAN: slab-use-after-free in sco_sock_timeout+0x5e/0x1c0 [ 95.890755] Write of size 4 at addr ffff88800c388080 by task kworker/0:0/7 ... [ 95.890755] Workqueue: events sco_sock_timeout [ 95.890755] Call Trace: [ 95.890755] [ 95.890755] dump_stack_lvl+0x45/0x110 [ 95.890755] print_address_description+0x78/0x390 [ 95.890755] print_report+0x11b/0x250 [ 95.890755] ? __virt_addr_valid+0xbe/0xf0 [ 95.890755] ? sco_sock_timeout+0x5e/0x1c0 [ 95.890755] kasan_report+0x139/0x170 [ 95.890755] ? update_load_avg+0xe5/0x9f0 [ 95.890755] ? sco_sock_timeout+0x5e/0x1c0 [ 95.890755] kasan_check_range+0x2c3/0x2e0 [ 95.890755] sco_sock_timeout+0x5e/0x1c0 [ 95.890755] process_one_work+0x561/0xc50 [ 95.890755] worker_thread+0xab2/0x13c0 [ 95.890755] ? pr_cont_work+0x490/0x490 [ 95.890755] kthread+0x279/0x300 [ 95.890755] ? pr_cont_work+0x490/0x490 [ 95.890755] ? kthread_blkcg+0xa0/0xa0 [ 95.890755] ret_from_fork+0x34/0x60 [ 95.890755] ? kthread_blkcg+0xa0/0xa0 [ 95.890755] ret_from_fork_asm+0x11/0x20 [ 95.890755] [ 95.890755] [ 95.890755] Allocated by task 506: [ 95.890755] kasan_save_track+0x3f/0x70 [ 95.890755] __kasan_kmalloc+0x86/0x90 [ 95.890755] __kmalloc+0x17f/0x360 [ 95.890755] sk_prot_alloc+0xe1/0x1a0 [ 95.890755] sk_alloc+0x31/0x4e0 [ 95.890755] bt_sock_alloc+0x2b/0x2a0 [ 95.890755] sco_sock_create+0xad/0x320 [ 95.890755] bt_sock_create+0x145/0x320 [ 95.890755] __sock_create+0x2e1/0x650 [ 95.890755] __sys_socket+0xd0/0x280 [ 95.890755] __x64_sys_socket+0x75/0x80 [ 95.890755] do_syscall_64+0xc4/0x1b0 [ 95.890755] entry_SYSCALL_64_after_hwframe+0x67/0x6f [ 95.890755] [ 95.890755] Freed by task 506: [ 95.890755] kasan_save_track+0x3f/0x70 [ 95.890755] kasan_save_free_info+0x40/0x50 [ 95.890755] poison_slab_object+0x118/0x180 [ 95.890755] __kasan_slab_free+0x12/0x30 [ 95.890755] kfree+0xb2/0x240 [ 95.890755] __sk_destruct+0x317/0x410 [ 95.890755] sco_sock_release+0x232/0x280 [ 95.890755] sock_close+0xb2/0x210 [ 95.890755] __fput+0x37f/0x770 [ 95.890755] task_work_run+0x1ae/0x210 [ 95.890755] get_signal+0xe17/0xf70 [ 95.890755] arch_do_signal_or_restart+0x3f/0x520 [ 95.890755] syscall_exit_to_user_mode+0x55/0x120 [ 95.890755] do_syscall_64+0xd1/0x1b0 [ 95.890755] entry_SYSCALL_64_after_hwframe+0x67/0x6f [ 95.890755] [ 95.890755] The buggy address belongs to the object at ffff88800c388000 [ 95.890755] which belongs to the cache kmalloc-1k of size 1024 [ 95.890755] The buggy address is located 128 bytes inside of [ 95.890755] freed 1024-byte region [ffff88800c388000, ffff88800c388400) [ 95.890755] [ 95.890755] The buggy address belongs to the physical page: [ 95.890755] page: refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff88800c38a800 pfn:0xc388 [ 95.890755] head: order:3 entire_mapcount:0 nr_pages_mapped:0 pincount:0 [ 95.890755] anon flags: 0x100000000000840(slab|head|node=0|zone=1) [ 95.890755] page_type: 0xffffffff() [ 95.890755] raw: 0100000000000840 ffff888006842dc0 0000000000000000 0000000000000001 [ 95.890755] raw: ffff88800c38a800 000000000010000a 00000001ffffffff 0000000000000000 [ 95.890755] head: 0100000000000840 ffff888006842dc0 0000000000000000 0000000000000001 [ 95.890755] head: ffff88800c38a800 000000000010000a 00000001ffffffff 0000000000000000 [ 95.890755] head: 0100000000000003 ffffea000030e201 ffffea000030e248 00000000ffffffff [ 95.890755] head: 0000000800000000 0000000000000000 00000000ffffffff 0000000000000000 [ 95.890755] page dumped because: kasan: bad access detected [ 95.890755] [ 95.890755] Memory state around the buggy address: [ 95.890755] ffff88800c387f80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 95.890755] ffff88800c388000: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 95.890755] >ffff88800c388080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 95.890755] ^ [ 95.890755] ffff88800c388100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 95.890755] ffff88800c388180: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 95.890755] ================================================================== Fix this problem by adding a check protected by sco_conn_lock to judget whether the conn->hcon is null. Because the conn->hcon will be set to null, when the sock is releasing. Fixes: ba316be1b6a0 ("Bluetooth: schedule SCO timeouts with delayed_work") Signed-off-by: Duoming Zhou Signed-off-by: Luiz Augusto von Dentz --- net/bluetooth/sco.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/net/bluetooth/sco.c b/net/bluetooth/sco.c index 5d03c5440b06..e0ad30862ee4 100644 --- a/net/bluetooth/sco.c +++ b/net/bluetooth/sco.c @@ -83,6 +83,10 @@ static void sco_sock_timeout(struct work_struct *work) struct sock *sk; sco_conn_lock(conn); + if (!conn->hcon) { + sco_conn_unlock(conn); + return; + } sk = conn->sk; if (sk) sock_hold(sk); -- cgit v1.2.3 From 66c39332d02d65e311ec89b0051130bfcd00c9ac Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Thu, 25 Apr 2024 09:55:03 +0200 Subject: Bluetooth: qca: fix wcn3991 device address check Qualcomm Bluetooth controllers may not have been provisioned with a valid device address and instead end up using the default address 00:00:00:00:5a:ad. This address is now used to determine if a controller has a valid address or if one needs to be provided through devicetree or by user space before the controller can be used. It turns out that the WCN3991 controllers used in Chromium Trogdor machines use a different default address, 39:98:00:00:5a:ad, which also needs to be marked as invalid so that the correct address is fetched from the devicetree. Qualcomm has unfortunately not yet provided any answers as to whether the 39:98 encodes a hardware id and if there are other variants of the default address that needs to be handled by the driver. For now, add the Trogdor WCN3991 default address to the device address check to avoid having these controllers start with the default address instead of their assigned addresses. Fixes: 32868e126c78 ("Bluetooth: qca: fix invalid device address check") Cc: stable@vger.kernel.org # 6.5 Cc: Doug Anderson Cc: Janaki Ramaiah Thota Signed-off-by: Johan Hovold Tested-by: Douglas Anderson Signed-off-by: Luiz Augusto von Dentz --- drivers/bluetooth/btqca.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/bluetooth/btqca.c b/drivers/bluetooth/btqca.c index 216826c31ee3..cfa71708397b 100644 --- a/drivers/bluetooth/btqca.c +++ b/drivers/bluetooth/btqca.c @@ -16,6 +16,7 @@ #define VERSION "0.1" #define QCA_BDADDR_DEFAULT (&(bdaddr_t) {{ 0xad, 0x5a, 0x00, 0x00, 0x00, 0x00 }}) +#define QCA_BDADDR_WCN3991 (&(bdaddr_t) {{ 0xad, 0x5a, 0x00, 0x00, 0x98, 0x39 }}) int qca_read_soc_version(struct hci_dev *hdev, struct qca_btsoc_version *ver, enum qca_btsoc_type soc_type) @@ -638,8 +639,10 @@ static int qca_check_bdaddr(struct hci_dev *hdev) } bda = (struct hci_rp_read_bd_addr *)skb->data; - if (!bacmp(&bda->bdaddr, QCA_BDADDR_DEFAULT)) + if (!bacmp(&bda->bdaddr, QCA_BDADDR_DEFAULT) || + !bacmp(&bda->bdaddr, QCA_BDADDR_WCN3991)) { set_bit(HCI_QUIRK_USE_BDADDR_PROPERTY, &hdev->quirks); + } kfree_skb(skb); -- cgit v1.2.3 From 4d7b41c0e43995b0e992b9f8903109275744b658 Mon Sep 17 00:00:00 2001 From: Sungwoo Kim Date: Tue, 30 Apr 2024 02:32:10 -0400 Subject: Bluetooth: L2CAP: Fix slab-use-after-free in l2cap_connect() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Extend a critical section to prevent chan from early freeing. Also make the l2cap_connect() return type void. Nothing is using the returned value but it is ugly to return a potentially freed pointer. Making it void will help with backports because earlier kernels did use the return value. Now the compile will break for kernels where this patch is not a complete fix. Call stack summary: [use] l2cap_bredr_sig_cmd l2cap_connect ┌ mutex_lock(&conn->chan_lock); │ chan = pchan->ops->new_connection(pchan); <- alloc chan │ __l2cap_chan_add(conn, chan); │ l2cap_chan_hold(chan); │ list_add(&chan->list, &conn->chan_l); ... (1) └ mutex_unlock(&conn->chan_lock); chan->conf_state ... (4) <- use after free [free] l2cap_conn_del ┌ mutex_lock(&conn->chan_lock); │ foreach chan in conn->chan_l: ... (2) │ l2cap_chan_put(chan); │ l2cap_chan_destroy │ kfree(chan) ... (3) <- chan freed └ mutex_unlock(&conn->chan_lock); ================================================================== BUG: KASAN: slab-use-after-free in instrument_atomic_read include/linux/instrumented.h:68 [inline] BUG: KASAN: slab-use-after-free in _test_bit include/asm-generic/bitops/instrumented-non-atomic.h:141 [inline] BUG: KASAN: slab-use-after-free in l2cap_connect+0xa67/0x11a0 net/bluetooth/l2cap_core.c:4260 Read of size 8 at addr ffff88810bf040a0 by task kworker/u3:1/311 Fixes: 73ffa904b782 ("Bluetooth: Move conf_{req,rsp} stuff to struct l2cap_chan") Signed-off-by: Sungwoo Kim Signed-off-by: Luiz Augusto von Dentz --- net/bluetooth/l2cap_core.c | 21 ++++++++++----------- 1 file changed, 10 insertions(+), 11 deletions(-) diff --git a/net/bluetooth/l2cap_core.c b/net/bluetooth/l2cap_core.c index 84fc70862d78..868a370a16aa 100644 --- a/net/bluetooth/l2cap_core.c +++ b/net/bluetooth/l2cap_core.c @@ -3902,13 +3902,12 @@ static inline int l2cap_command_rej(struct l2cap_conn *conn, return 0; } -static struct l2cap_chan *l2cap_connect(struct l2cap_conn *conn, - struct l2cap_cmd_hdr *cmd, - u8 *data, u8 rsp_code, u8 amp_id) +static void l2cap_connect(struct l2cap_conn *conn, struct l2cap_cmd_hdr *cmd, + u8 *data, u8 rsp_code, u8 amp_id) { struct l2cap_conn_req *req = (struct l2cap_conn_req *) data; struct l2cap_conn_rsp rsp; - struct l2cap_chan *chan = NULL, *pchan; + struct l2cap_chan *chan = NULL, *pchan = NULL; int result, status = L2CAP_CS_NO_INFO; u16 dcid = 0, scid = __le16_to_cpu(req->scid); @@ -3921,7 +3920,7 @@ static struct l2cap_chan *l2cap_connect(struct l2cap_conn *conn, &conn->hcon->dst, ACL_LINK); if (!pchan) { result = L2CAP_CR_BAD_PSM; - goto sendresp; + goto response; } mutex_lock(&conn->chan_lock); @@ -4008,17 +4007,15 @@ static struct l2cap_chan *l2cap_connect(struct l2cap_conn *conn, } response: - l2cap_chan_unlock(pchan); - mutex_unlock(&conn->chan_lock); - l2cap_chan_put(pchan); - -sendresp: rsp.scid = cpu_to_le16(scid); rsp.dcid = cpu_to_le16(dcid); rsp.result = cpu_to_le16(result); rsp.status = cpu_to_le16(status); l2cap_send_cmd(conn, cmd->ident, rsp_code, sizeof(rsp), &rsp); + if (!pchan) + return; + if (result == L2CAP_CR_PEND && status == L2CAP_CS_NO_INFO) { struct l2cap_info_req info; info.type = cpu_to_le16(L2CAP_IT_FEAT_MASK); @@ -4041,7 +4038,9 @@ sendresp: chan->num_conf_req++; } - return chan; + l2cap_chan_unlock(pchan); + mutex_unlock(&conn->chan_lock); + l2cap_chan_put(pchan); } static int l2cap_connect_req(struct l2cap_conn *conn, -- cgit v1.2.3 From 10f9f426ac6e752c8d87bf4346930ba347aaabac Mon Sep 17 00:00:00 2001 From: Sungwoo Kim Date: Tue, 30 Apr 2024 12:20:51 -0400 Subject: Bluetooth: msft: fix slab-use-after-free in msft_do_close() Tying the msft->data lifetime to hdev by freeing it in hci_release_dev() to fix the following case: [use] msft_do_close() msft = hdev->msft_data; if (!msft) ...(1) <- passed. return; mutex_lock(&msft->filter_lock); ...(4) <- used after freed. [free] msft_unregister() msft = hdev->msft_data; hdev->msft_data = NULL; ...(2) kfree(msft); ...(3) <- msft is freed. ================================================================== BUG: KASAN: slab-use-after-free in __mutex_lock_common kernel/locking/mutex.c:587 [inline] BUG: KASAN: slab-use-after-free in __mutex_lock+0x8f/0xc30 kernel/locking/mutex.c:752 Read of size 8 at addr ffff888106cbbca8 by task kworker/u5:2/309 Fixes: bf6a4e30ffbd ("Bluetooth: disable advertisement filters during suspend") Signed-off-by: Sungwoo Kim Signed-off-by: Luiz Augusto von Dentz --- net/bluetooth/hci_core.c | 3 +-- net/bluetooth/msft.c | 2 +- net/bluetooth/msft.h | 4 ++-- 3 files changed, 4 insertions(+), 5 deletions(-) diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c index a7028d38c1f5..bc5086423ab8 100644 --- a/net/bluetooth/hci_core.c +++ b/net/bluetooth/hci_core.c @@ -2768,8 +2768,6 @@ void hci_unregister_dev(struct hci_dev *hdev) hci_unregister_suspend_notifier(hdev); - msft_unregister(hdev); - hci_dev_do_close(hdev); if (!test_bit(HCI_INIT, &hdev->flags) && @@ -2823,6 +2821,7 @@ void hci_release_dev(struct hci_dev *hdev) hci_discovery_filter_clear(hdev); hci_blocked_keys_clear(hdev); hci_codec_list_clear(&hdev->local_codecs); + msft_release(hdev); hci_dev_unlock(hdev); ida_destroy(&hdev->unset_handle_ida); diff --git a/net/bluetooth/msft.c b/net/bluetooth/msft.c index 9612c5d1b13f..d039683d3bdd 100644 --- a/net/bluetooth/msft.c +++ b/net/bluetooth/msft.c @@ -769,7 +769,7 @@ void msft_register(struct hci_dev *hdev) mutex_init(&msft->filter_lock); } -void msft_unregister(struct hci_dev *hdev) +void msft_release(struct hci_dev *hdev) { struct msft_data *msft = hdev->msft_data; diff --git a/net/bluetooth/msft.h b/net/bluetooth/msft.h index 2a63205b377b..fe538e9c91c0 100644 --- a/net/bluetooth/msft.h +++ b/net/bluetooth/msft.h @@ -14,7 +14,7 @@ bool msft_monitor_supported(struct hci_dev *hdev); void msft_register(struct hci_dev *hdev); -void msft_unregister(struct hci_dev *hdev); +void msft_release(struct hci_dev *hdev); void msft_do_open(struct hci_dev *hdev); void msft_do_close(struct hci_dev *hdev); void msft_vendor_evt(struct hci_dev *hdev, void *data, struct sk_buff *skb); @@ -35,7 +35,7 @@ static inline bool msft_monitor_supported(struct hci_dev *hdev) } static inline void msft_register(struct hci_dev *hdev) {} -static inline void msft_unregister(struct hci_dev *hdev) {} +static inline void msft_release(struct hci_dev *hdev) {} static inline void msft_do_open(struct hci_dev *hdev) {} static inline void msft_do_close(struct hci_dev *hdev) {} static inline void msft_vendor_evt(struct hci_dev *hdev, void *data, -- cgit v1.2.3 From 2e4edfa1e2bd821a317e7d006517dcf2f3fac68d Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Tue, 30 Apr 2024 19:07:39 +0200 Subject: Bluetooth: qca: add missing firmware sanity checks Add the missing sanity checks when parsing the firmware files before downloading them to avoid accessing and corrupting memory beyond the vmalloced buffer. Fixes: 83e81961ff7e ("Bluetooth: btqca: Introduce generic QCA ROME support") Cc: stable@vger.kernel.org # 4.10 Signed-off-by: Johan Hovold Signed-off-by: Luiz Augusto von Dentz --- drivers/bluetooth/btqca.c | 38 ++++++++++++++++++++++++++++++++------ 1 file changed, 32 insertions(+), 6 deletions(-) diff --git a/drivers/bluetooth/btqca.c b/drivers/bluetooth/btqca.c index cfa71708397b..6743b0a79d7a 100644 --- a/drivers/bluetooth/btqca.c +++ b/drivers/bluetooth/btqca.c @@ -268,9 +268,10 @@ int qca_send_pre_shutdown_cmd(struct hci_dev *hdev) } EXPORT_SYMBOL_GPL(qca_send_pre_shutdown_cmd); -static void qca_tlv_check_data(struct hci_dev *hdev, +static int qca_tlv_check_data(struct hci_dev *hdev, struct qca_fw_config *config, - u8 *fw_data, enum qca_btsoc_type soc_type) + u8 *fw_data, size_t fw_size, + enum qca_btsoc_type soc_type) { const u8 *data; u32 type_len; @@ -286,6 +287,9 @@ static void qca_tlv_check_data(struct hci_dev *hdev, switch (config->type) { case ELF_TYPE_PATCH: + if (fw_size < 7) + return -EINVAL; + config->dnld_mode = QCA_SKIP_EVT_VSE_CC; config->dnld_type = QCA_SKIP_EVT_VSE_CC; @@ -294,6 +298,9 @@ static void qca_tlv_check_data(struct hci_dev *hdev, bt_dev_dbg(hdev, "File version : 0x%x", fw_data[6]); break; case TLV_TYPE_PATCH: + if (fw_size < sizeof(struct tlv_type_hdr) + sizeof(struct tlv_type_patch)) + return -EINVAL; + tlv = (struct tlv_type_hdr *)fw_data; type_len = le32_to_cpu(tlv->type_len); tlv_patch = (struct tlv_type_patch *)tlv->data; @@ -333,6 +340,9 @@ static void qca_tlv_check_data(struct hci_dev *hdev, break; case TLV_TYPE_NVM: + if (fw_size < sizeof(struct tlv_type_hdr)) + return -EINVAL; + tlv = (struct tlv_type_hdr *)fw_data; type_len = le32_to_cpu(tlv->type_len); @@ -341,17 +351,26 @@ static void qca_tlv_check_data(struct hci_dev *hdev, BT_DBG("TLV Type\t\t : 0x%x", type_len & 0x000000ff); BT_DBG("Length\t\t : %d bytes", length); + if (fw_size < length + (tlv->data - fw_data)) + return -EINVAL; + idx = 0; data = tlv->data; - while (idx < length) { + while (idx < length - sizeof(struct tlv_type_nvm)) { tlv_nvm = (struct tlv_type_nvm *)(data + idx); tag_id = le16_to_cpu(tlv_nvm->tag_id); tag_len = le16_to_cpu(tlv_nvm->tag_len); + if (length < idx + sizeof(struct tlv_type_nvm) + tag_len) + return -EINVAL; + /* Update NVM tags as needed */ switch (tag_id) { case EDL_TAG_ID_HCI: + if (tag_len < 3) + return -EINVAL; + /* HCI transport layer parameters * enabling software inband sleep * onto controller side. @@ -367,6 +386,9 @@ static void qca_tlv_check_data(struct hci_dev *hdev, break; case EDL_TAG_ID_DEEP_SLEEP: + if (tag_len < 1) + return -EINVAL; + /* Sleep enable mask * enabling deep sleep feature on controller. */ @@ -375,14 +397,16 @@ static void qca_tlv_check_data(struct hci_dev *hdev, break; } - idx += (sizeof(u16) + sizeof(u16) + 8 + tag_len); + idx += sizeof(struct tlv_type_nvm) + tag_len; } break; default: BT_ERR("Unknown TLV type %d", config->type); - break; + return -EINVAL; } + + return 0; } static int qca_tlv_send_segment(struct hci_dev *hdev, int seg_size, @@ -532,7 +556,9 @@ static int qca_download_firmware(struct hci_dev *hdev, memcpy(data, fw->data, size); release_firmware(fw); - qca_tlv_check_data(hdev, config, data, soc_type); + ret = qca_tlv_check_data(hdev, config, data, size, soc_type); + if (ret) + return ret; segment = data; remain = size; -- cgit v1.2.3 From a112d3c72a227f2edbb6d8094472cc6e503e52af Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Tue, 30 Apr 2024 19:07:40 +0200 Subject: Bluetooth: qca: fix NVM configuration parsing The NVM configuration files used by WCN3988 and WCN3990/1/8 have two sets of configuration tags that are enclosed by a type-length header of type four which the current parser fails to account for. Instead the driver happily parses random data as if it were valid tags, something which can lead to the configuration data being corrupted if it ever encounters the words 0x0011 or 0x001b. As is clear from commit b63882549b2b ("Bluetooth: btqca: Fix the NVM baudrate tag offcet for wcn3991") the intention has always been to process the configuration data also for WCN3991 and WCN3998 which encodes the baud rate at a different offset. Fix the parser so that it can handle the WCN3xxx configuration files, which has an enclosing type-length header of type four and two sets of TLV tags enclosed by a type-length header of type two and three, respectively. Note that only the first set, which contains the tags the driver is currently looking for, will be parsed for now. With the parser fixed, the software in-band sleep bit will now be set for WCN3991 and WCN3998 (as it is for later controllers) and the default baud rate 3200000 may be updated by the driver also for WCN3xxx controllers. Notably the deep-sleep feature bit is already set by default in all configuration files in linux-firmware. Fixes: 4219d4686875 ("Bluetooth: btqca: Add wcn3990 firmware download support.") Cc: stable@vger.kernel.org # 4.19 Cc: Matthias Kaehlcke Signed-off-by: Johan Hovold Signed-off-by: Luiz Augusto von Dentz --- drivers/bluetooth/btqca.c | 24 ++++++++++++++++++++++-- 1 file changed, 22 insertions(+), 2 deletions(-) diff --git a/drivers/bluetooth/btqca.c b/drivers/bluetooth/btqca.c index 6743b0a79d7a..f6c9f89a6311 100644 --- a/drivers/bluetooth/btqca.c +++ b/drivers/bluetooth/btqca.c @@ -281,6 +281,7 @@ static int qca_tlv_check_data(struct hci_dev *hdev, struct tlv_type_patch *tlv_patch; struct tlv_type_nvm *tlv_nvm; uint8_t nvm_baud_rate = config->user_baud_rate; + u8 type; config->dnld_mode = QCA_SKIP_EVT_NONE; config->dnld_type = QCA_SKIP_EVT_NONE; @@ -346,11 +347,30 @@ static int qca_tlv_check_data(struct hci_dev *hdev, tlv = (struct tlv_type_hdr *)fw_data; type_len = le32_to_cpu(tlv->type_len); - length = (type_len >> 8) & 0x00ffffff; + length = type_len >> 8; + type = type_len & 0xff; - BT_DBG("TLV Type\t\t : 0x%x", type_len & 0x000000ff); + /* Some NVM files have more than one set of tags, only parse + * the first set when it has type 2 for now. When there is + * more than one set there is an enclosing header of type 4. + */ + if (type == 4) { + if (fw_size < 2 * sizeof(struct tlv_type_hdr)) + return -EINVAL; + + tlv++; + + type_len = le32_to_cpu(tlv->type_len); + length = type_len >> 8; + type = type_len & 0xff; + } + + BT_DBG("TLV Type\t\t : 0x%x", type); BT_DBG("Length\t\t : %d bytes", length); + if (type != 2) + break; + if (fw_size < length + (tlv->data - fw_data)) return -EINVAL; -- cgit v1.2.3 From dd336649ba89789c845618dcbc09867010aec673 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Tue, 30 Apr 2024 19:07:41 +0200 Subject: Bluetooth: qca: generalise device address check The default device address apparently comes from the NVM configuration file and can differ quite a bit between controllers. Store the default address when parsing the configuration file and use it to determine whether the controller has been provisioned with an address. This makes sure that devices without a unique address start as unconfigured unless a valid address has been provided in the devicetree. Fixes: 32868e126c78 ("Bluetooth: qca: fix invalid device address check") Cc: stable@vger.kernel.org # 6.5 Cc: Doug Anderson Cc: Janaki Ramaiah Thota Signed-off-by: Johan Hovold Tested-by: Douglas Anderson Signed-off-by: Luiz Augusto von Dentz --- drivers/bluetooth/btqca.c | 21 ++++++++++++--------- drivers/bluetooth/btqca.h | 2 ++ 2 files changed, 14 insertions(+), 9 deletions(-) diff --git a/drivers/bluetooth/btqca.c b/drivers/bluetooth/btqca.c index f6c9f89a6311..c6b2dd4d1716 100644 --- a/drivers/bluetooth/btqca.c +++ b/drivers/bluetooth/btqca.c @@ -15,9 +15,6 @@ #define VERSION "0.1" -#define QCA_BDADDR_DEFAULT (&(bdaddr_t) {{ 0xad, 0x5a, 0x00, 0x00, 0x00, 0x00 }}) -#define QCA_BDADDR_WCN3991 (&(bdaddr_t) {{ 0xad, 0x5a, 0x00, 0x00, 0x98, 0x39 }}) - int qca_read_soc_version(struct hci_dev *hdev, struct qca_btsoc_version *ver, enum qca_btsoc_type soc_type) { @@ -387,6 +384,14 @@ static int qca_tlv_check_data(struct hci_dev *hdev, /* Update NVM tags as needed */ switch (tag_id) { + case EDL_TAG_ID_BD_ADDR: + if (tag_len != sizeof(bdaddr_t)) + return -EINVAL; + + memcpy(&config->bdaddr, tlv_nvm->data, sizeof(bdaddr_t)); + + break; + case EDL_TAG_ID_HCI: if (tag_len < 3) return -EINVAL; @@ -661,7 +666,7 @@ int qca_set_bdaddr_rome(struct hci_dev *hdev, const bdaddr_t *bdaddr) } EXPORT_SYMBOL_GPL(qca_set_bdaddr_rome); -static int qca_check_bdaddr(struct hci_dev *hdev) +static int qca_check_bdaddr(struct hci_dev *hdev, const struct qca_fw_config *config) { struct hci_rp_read_bd_addr *bda; struct sk_buff *skb; @@ -685,10 +690,8 @@ static int qca_check_bdaddr(struct hci_dev *hdev) } bda = (struct hci_rp_read_bd_addr *)skb->data; - if (!bacmp(&bda->bdaddr, QCA_BDADDR_DEFAULT) || - !bacmp(&bda->bdaddr, QCA_BDADDR_WCN3991)) { + if (!bacmp(&bda->bdaddr, &config->bdaddr)) set_bit(HCI_QUIRK_USE_BDADDR_PROPERTY, &hdev->quirks); - } kfree_skb(skb); @@ -716,7 +719,7 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate, enum qca_btsoc_type soc_type, struct qca_btsoc_version ver, const char *firmware_name) { - struct qca_fw_config config; + struct qca_fw_config config = {}; int err; u8 rom_ver = 0; u32 soc_ver; @@ -901,7 +904,7 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate, break; } - err = qca_check_bdaddr(hdev); + err = qca_check_bdaddr(hdev, &config); if (err) return err; diff --git a/drivers/bluetooth/btqca.h b/drivers/bluetooth/btqca.h index dc31984f71dc..49ad668d0d0b 100644 --- a/drivers/bluetooth/btqca.h +++ b/drivers/bluetooth/btqca.h @@ -29,6 +29,7 @@ #define EDL_PATCH_CONFIG_RES_EVT (0x00) #define QCA_DISABLE_LOGGING_SUB_OP (0x14) +#define EDL_TAG_ID_BD_ADDR 2 #define EDL_TAG_ID_HCI (17) #define EDL_TAG_ID_DEEP_SLEEP (27) @@ -94,6 +95,7 @@ struct qca_fw_config { uint8_t user_baud_rate; enum qca_tlv_dnld_mode dnld_mode; enum qca_tlv_dnld_mode dnld_type; + bdaddr_t bdaddr; }; struct edl_event_hdr { -- cgit v1.2.3 From cda0d6a198e2a7ec6f176c36173a57bdd8af7af2 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Wed, 1 May 2024 14:34:52 +0200 Subject: Bluetooth: qca: fix info leak when fetching fw build id Add the missing sanity checks and move the 255-byte build-id buffer off the stack to avoid leaking stack data through debugfs in case the build-info reply is malformed. Fixes: c0187b0bd3e9 ("Bluetooth: btqca: Add support to read FW build version for WCN3991 BTSoC") Cc: stable@vger.kernel.org # 5.12 Signed-off-by: Johan Hovold Signed-off-by: Luiz Augusto von Dentz --- drivers/bluetooth/btqca.c | 25 +++++++++++++++++++++---- drivers/bluetooth/btqca.h | 1 - 2 files changed, 21 insertions(+), 5 deletions(-) diff --git a/drivers/bluetooth/btqca.c b/drivers/bluetooth/btqca.c index c6b2dd4d1716..664db524b1dd 100644 --- a/drivers/bluetooth/btqca.c +++ b/drivers/bluetooth/btqca.c @@ -99,7 +99,8 @@ static int qca_read_fw_build_info(struct hci_dev *hdev) { struct sk_buff *skb; struct edl_event_hdr *edl; - char cmd, build_label[QCA_FW_BUILD_VER_LEN]; + char *build_label; + char cmd; int build_lbl_len, err = 0; bt_dev_dbg(hdev, "QCA read fw build info"); @@ -114,6 +115,11 @@ static int qca_read_fw_build_info(struct hci_dev *hdev) return err; } + if (skb->len < sizeof(*edl)) { + err = -EILSEQ; + goto out; + } + edl = (struct edl_event_hdr *)(skb->data); if (!edl) { bt_dev_err(hdev, "QCA read fw build info with no header"); @@ -129,14 +135,25 @@ static int qca_read_fw_build_info(struct hci_dev *hdev) goto out; } + if (skb->len < sizeof(*edl) + 1) { + err = -EILSEQ; + goto out; + } + build_lbl_len = edl->data[0]; - if (build_lbl_len <= QCA_FW_BUILD_VER_LEN - 1) { - memcpy(build_label, edl->data + 1, build_lbl_len); - *(build_label + build_lbl_len) = '\0'; + + if (skb->len < sizeof(*edl) + 1 + build_lbl_len) { + err = -EILSEQ; + goto out; } + build_label = kstrndup(&edl->data[1], build_lbl_len, GFP_KERNEL); + if (!build_label) + goto out; + hci_set_fw_info(hdev, "%s", build_label); + kfree(build_label); out: kfree_skb(skb); return err; diff --git a/drivers/bluetooth/btqca.h b/drivers/bluetooth/btqca.h index 49ad668d0d0b..215433fd76a1 100644 --- a/drivers/bluetooth/btqca.h +++ b/drivers/bluetooth/btqca.h @@ -48,7 +48,6 @@ #define get_soc_ver(soc_id, rom_ver) \ ((le32_to_cpu(soc_id) << 16) | (le16_to_cpu(rom_ver))) -#define QCA_FW_BUILD_VER_LEN 255 #define QCA_HSP_GF_SOC_ID 0x1200 #define QCA_HSP_GF_SOC_MASK 0x0000ff00 -- cgit v1.2.3 From 0adcf6be1445ed50bfd4a451a7a782568f270197 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Wed, 1 May 2024 14:34:53 +0200 Subject: Bluetooth: qca: fix info leak when fetching board id Add the missing sanity check when fetching the board id to avoid leaking slab data when later requesting the firmware. Fixes: a7f8dedb4be2 ("Bluetooth: qca: add support for QCA2066") Cc: stable@vger.kernel.org # 6.7 Cc: Tim Jiang Signed-off-by: Johan Hovold Signed-off-by: Luiz Augusto von Dentz --- drivers/bluetooth/btqca.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/bluetooth/btqca.c b/drivers/bluetooth/btqca.c index 664db524b1dd..8d8a664620a3 100644 --- a/drivers/bluetooth/btqca.c +++ b/drivers/bluetooth/btqca.c @@ -252,6 +252,11 @@ static int qca_read_fw_board_id(struct hci_dev *hdev, u16 *bid) goto out; } + if (skb->len < 3) { + err = -EILSEQ; + goto out; + } + *bid = (edl->data[1] << 8) + edl->data[2]; bt_dev_dbg(hdev, "%s: bid = %x", __func__, *bid); -- cgit v1.2.3 From cd17bcbd2b33d7c816b80640ae2fef2507576278 Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Fri, 12 Apr 2024 15:30:43 +0800 Subject: arm64: dts: mediatek: mt8183-pico6: Fix bluetooth node Bluetooth is not a random device connected to the MMC/SD controller. It is function 2 of the SDIO device. Fix the address of the bluetooth node. Also fix the node name and drop the label. Fixes: 055ef10ccdd4 ("arm64: dts: mt8183: Add jacuzzi pico/pico6 board") Signed-off-by: Chen-Yu Tsai Reviewed-by: AngeloGioacchino Del Regno Signed-off-by: Luiz Augusto von Dentz --- arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-pico6.dts | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-pico6.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-pico6.dts index a2e74b829320..6a7ae616512d 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-pico6.dts +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-pico6.dts @@ -82,7 +82,8 @@ }; &mmc1 { - bt_reset: bt-reset { + bluetooth@2 { + reg = <2>; compatible = "mediatek,mt7921s-bluetooth"; pinctrl-names = "default"; pinctrl-0 = <&bt_pins_reset>; -- cgit v1.2.3 From d2706004a1b8b526592e823d7e52551b518a7941 Mon Sep 17 00:00:00 2001 From: Sungwoo Kim Date: Thu, 2 May 2024 12:09:31 -0400 Subject: Bluetooth: HCI: Fix potential null-ptr-deref Fix potential null-ptr-deref in hci_le_big_sync_established_evt(). Fixes: f777d8827817 (Bluetooth: ISO: Notify user space about failed bis connections) Signed-off-by: Sungwoo Kim Signed-off-by: Luiz Augusto von Dentz --- net/bluetooth/hci_event.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c index 4a27e4a17a67..d72d238c1656 100644 --- a/net/bluetooth/hci_event.c +++ b/net/bluetooth/hci_event.c @@ -7037,6 +7037,8 @@ static void hci_le_big_sync_established_evt(struct hci_dev *hdev, void *data, u16 handle = le16_to_cpu(ev->bis[i]); bis = hci_conn_hash_lookup_handle(hdev, handle); + if (!bis) + continue; set_bit(HCI_CONN_BIG_SYNC_FAILED, &bis->flags); hci_connect_cfm(bis, ev->status); -- cgit v1.2.3 From adf0398cee86643b8eacde95f17d073d022f782c Mon Sep 17 00:00:00 2001 From: Duoming Zhou Date: Thu, 2 May 2024 20:57:36 +0800 Subject: Bluetooth: l2cap: fix null-ptr-deref in l2cap_chan_timeout There is a race condition between l2cap_chan_timeout() and l2cap_chan_del(). When we use l2cap_chan_del() to delete the channel, the chan->conn will be set to null. But the conn could be dereferenced again in the mutex_lock() of l2cap_chan_timeout(). As a result the null pointer dereference bug will happen. The KASAN report triggered by POC is shown below: [ 472.074580] ================================================================== [ 472.075284] BUG: KASAN: null-ptr-deref in mutex_lock+0x68/0xc0 [ 472.075308] Write of size 8 at addr 0000000000000158 by task kworker/0:0/7 [ 472.075308] [ 472.075308] CPU: 0 PID: 7 Comm: kworker/0:0 Not tainted 6.9.0-rc5-00356-g78c0094a146b #36 [ 472.075308] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu4 [ 472.075308] Workqueue: events l2cap_chan_timeout [ 472.075308] Call Trace: [ 472.075308] [ 472.075308] dump_stack_lvl+0x137/0x1a0 [ 472.075308] print_report+0x101/0x250 [ 472.075308] ? __virt_addr_valid+0x77/0x160 [ 472.075308] ? mutex_lock+0x68/0xc0 [ 472.075308] kasan_report+0x139/0x170 [ 472.075308] ? mutex_lock+0x68/0xc0 [ 472.075308] kasan_check_range+0x2c3/0x2e0 [ 472.075308] mutex_lock+0x68/0xc0 [ 472.075308] l2cap_chan_timeout+0x181/0x300 [ 472.075308] process_one_work+0x5d2/0xe00 [ 472.075308] worker_thread+0xe1d/0x1660 [ 472.075308] ? pr_cont_work+0x5e0/0x5e0 [ 472.075308] kthread+0x2b7/0x350 [ 472.075308] ? pr_cont_work+0x5e0/0x5e0 [ 472.075308] ? kthread_blkcg+0xd0/0xd0 [ 472.075308] ret_from_fork+0x4d/0x80 [ 472.075308] ? kthread_blkcg+0xd0/0xd0 [ 472.075308] ret_from_fork_asm+0x11/0x20 [ 472.075308] [ 472.075308] ================================================================== [ 472.094860] Disabling lock debugging due to kernel taint [ 472.096136] BUG: kernel NULL pointer dereference, address: 0000000000000158 [ 472.096136] #PF: supervisor write access in kernel mode [ 472.096136] #PF: error_code(0x0002) - not-present page [ 472.096136] PGD 0 P4D 0 [ 472.096136] Oops: 0002 [#1] PREEMPT SMP KASAN NOPTI [ 472.096136] CPU: 0 PID: 7 Comm: kworker/0:0 Tainted: G B 6.9.0-rc5-00356-g78c0094a146b #36 [ 472.096136] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu4 [ 472.096136] Workqueue: events l2cap_chan_timeout [ 472.096136] RIP: 0010:mutex_lock+0x88/0xc0 [ 472.096136] Code: be 08 00 00 00 e8 f8 23 1f fd 4c 89 f7 be 08 00 00 00 e8 eb 23 1f fd 42 80 3c 23 00 74 08 48 88 [ 472.096136] RSP: 0018:ffff88800744fc78 EFLAGS: 00000246 [ 472.096136] RAX: 0000000000000000 RBX: 1ffff11000e89f8f RCX: ffffffff8457c865 [ 472.096136] RDX: 0000000000000001 RSI: 0000000000000008 RDI: ffff88800744fc78 [ 472.096136] RBP: 0000000000000158 R08: ffff88800744fc7f R09: 1ffff11000e89f8f [ 472.096136] R10: dffffc0000000000 R11: ffffed1000e89f90 R12: dffffc0000000000 [ 472.096136] R13: 0000000000000158 R14: ffff88800744fc78 R15: ffff888007405a00 [ 472.096136] FS: 0000000000000000(0000) GS:ffff88806d200000(0000) knlGS:0000000000000000 [ 472.096136] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 472.096136] CR2: 0000000000000158 CR3: 000000000da32000 CR4: 00000000000006f0 [ 472.096136] Call Trace: [ 472.096136] [ 472.096136] ? __die_body+0x8d/0xe0 [ 472.096136] ? page_fault_oops+0x6b8/0x9a0 [ 472.096136] ? kernelmode_fixup_or_oops+0x20c/0x2a0 [ 472.096136] ? do_user_addr_fault+0x1027/0x1340 [ 472.096136] ? _printk+0x7a/0xa0 [ 472.096136] ? mutex_lock+0x68/0xc0 [ 472.096136] ? add_taint+0x42/0xd0 [ 472.096136] ? exc_page_fault+0x6a/0x1b0 [ 472.096136] ? asm_exc_page_fault+0x26/0x30 [ 472.096136] ? mutex_lock+0x75/0xc0 [ 472.096136] ? mutex_lock+0x88/0xc0 [ 472.096136] ? mutex_lock+0x75/0xc0 [ 472.096136] l2cap_chan_timeout+0x181/0x300 [ 472.096136] process_one_work+0x5d2/0xe00 [ 472.096136] worker_thread+0xe1d/0x1660 [ 472.096136] ? pr_cont_work+0x5e0/0x5e0 [ 472.096136] kthread+0x2b7/0x350 [ 472.096136] ? pr_cont_work+0x5e0/0x5e0 [ 472.096136] ? kthread_blkcg+0xd0/0xd0 [ 472.096136] ret_from_fork+0x4d/0x80 [ 472.096136] ? kthread_blkcg+0xd0/0xd0 [ 472.096136] ret_from_fork_asm+0x11/0x20 [ 472.096136] [ 472.096136] Modules linked in: [ 472.096136] CR2: 0000000000000158 [ 472.096136] ---[ end trace 0000000000000000 ]--- [ 472.096136] RIP: 0010:mutex_lock+0x88/0xc0 [ 472.096136] Code: be 08 00 00 00 e8 f8 23 1f fd 4c 89 f7 be 08 00 00 00 e8 eb 23 1f fd 42 80 3c 23 00 74 08 48 88 [ 472.096136] RSP: 0018:ffff88800744fc78 EFLAGS: 00000246 [ 472.096136] RAX: 0000000000000000 RBX: 1ffff11000e89f8f RCX: ffffffff8457c865 [ 472.096136] RDX: 0000000000000001 RSI: 0000000000000008 RDI: ffff88800744fc78 [ 472.096136] RBP: 0000000000000158 R08: ffff88800744fc7f R09: 1ffff11000e89f8f [ 472.132932] R10: dffffc0000000000 R11: ffffed1000e89f90 R12: dffffc0000000000 [ 472.132932] R13: 0000000000000158 R14: ffff88800744fc78 R15: ffff888007405a00 [ 472.132932] FS: 0000000000000000(0000) GS:ffff88806d200000(0000) knlGS:0000000000000000 [ 472.132932] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 472.132932] CR2: 0000000000000158 CR3: 000000000da32000 CR4: 00000000000006f0 [ 472.132932] Kernel panic - not syncing: Fatal exception [ 472.132932] Kernel Offset: disabled [ 472.132932] ---[ end Kernel panic - not syncing: Fatal exception ]--- Add a check to judge whether the conn is null in l2cap_chan_timeout() in order to mitigate the bug. Fixes: 3df91ea20e74 ("Bluetooth: Revert to mutexes from RCU list") Signed-off-by: Duoming Zhou Signed-off-by: Luiz Augusto von Dentz --- net/bluetooth/l2cap_core.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/net/bluetooth/l2cap_core.c b/net/bluetooth/l2cap_core.c index 868a370a16aa..9223b1a698e3 100644 --- a/net/bluetooth/l2cap_core.c +++ b/net/bluetooth/l2cap_core.c @@ -415,6 +415,9 @@ static void l2cap_chan_timeout(struct work_struct *work) BT_DBG("chan %p state %s", chan, state_to_string(chan->state)); + if (!conn) + return; + mutex_lock(&conn->chan_lock); /* __set_chan_timer() calls l2cap_chan_hold(chan) while scheduling * this work. No need to call l2cap_chan_hold(chan) here again. -- cgit v1.2.3 From 40d442f969fb1e871da6fca73d3f8aef1f888558 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Wed, 1 May 2024 08:37:40 +0200 Subject: Bluetooth: qca: fix firmware check error path A recent commit fixed the code that parses the firmware files before downloading them to the controller but introduced a memory leak in case the sanity checks ever fail. Make sure to free the firmware buffer before returning on errors. Fixes: f905ae0be4b7 ("Bluetooth: qca: add missing firmware sanity checks") Cc: stable@vger.kernel.org # 4.19 Signed-off-by: Johan Hovold Signed-off-by: Luiz Augusto von Dentz --- drivers/bluetooth/btqca.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/bluetooth/btqca.c b/drivers/bluetooth/btqca.c index 8d8a664620a3..638074992c82 100644 --- a/drivers/bluetooth/btqca.c +++ b/drivers/bluetooth/btqca.c @@ -605,7 +605,7 @@ static int qca_download_firmware(struct hci_dev *hdev, ret = qca_tlv_check_data(hdev, config, data, size, soc_type); if (ret) - return ret; + goto out; segment = data; remain = size; -- cgit v1.2.3 From e0863634bf9f7cf36291ebb5bfa2d16632f79c49 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Thu, 2 May 2024 20:32:59 +0200 Subject: net: ks8851: Queue RX packets in IRQ handler instead of disabling BHs Currently the driver uses local_bh_disable()/local_bh_enable() in its IRQ handler to avoid triggering net_rx_action() softirq on exit from netif_rx(). The net_rx_action() could trigger this driver .start_xmit callback, which is protected by the same lock as the IRQ handler, so calling the .start_xmit from netif_rx() from the IRQ handler critical section protected by the lock could lead to an attempt to claim the already claimed lock, and a hang. The local_bh_disable()/local_bh_enable() approach works only in case the IRQ handler is protected by a spinlock, but does not work if the IRQ handler is protected by mutex, i.e. this works for KS8851 with Parallel bus interface, but not for KS8851 with SPI bus interface. Remove the BH manipulation and instead of calling netif_rx() inside the IRQ handler code protected by the lock, queue all the received SKBs in the IRQ handler into a queue first, and once the IRQ handler exits the critical section protected by the lock, dequeue all the queued SKBs and push them all into netif_rx(). At this point, it is safe to trigger the net_rx_action() softirq, since the netif_rx() call is outside of the lock that protects the IRQ handler. Fixes: be0384bf599c ("net: ks8851: Handle softirqs at the end of IRQ thread to fix hang") Tested-by: Ronald Wahl # KS8851 SPI Signed-off-by: Marek Vasut Reviewed-by: Eric Dumazet Link: https://lore.kernel.org/r/20240502183436.117117-1-marex@denx.de Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/micrel/ks8851_common.c | 16 ++++++++++------ 1 file changed, 10 insertions(+), 6 deletions(-) diff --git a/drivers/net/ethernet/micrel/ks8851_common.c b/drivers/net/ethernet/micrel/ks8851_common.c index d4cdf3d4f552..502518cdb461 100644 --- a/drivers/net/ethernet/micrel/ks8851_common.c +++ b/drivers/net/ethernet/micrel/ks8851_common.c @@ -234,12 +234,13 @@ static void ks8851_dbg_dumpkkt(struct ks8851_net *ks, u8 *rxpkt) /** * ks8851_rx_pkts - receive packets from the host * @ks: The device information. + * @rxq: Queue of packets received in this function. * * This is called from the IRQ work queue when the system detects that there * are packets in the receive queue. Find out how many packets there are and * read them from the FIFO. */ -static void ks8851_rx_pkts(struct ks8851_net *ks) +static void ks8851_rx_pkts(struct ks8851_net *ks, struct sk_buff_head *rxq) { struct sk_buff *skb; unsigned rxfc; @@ -299,7 +300,7 @@ static void ks8851_rx_pkts(struct ks8851_net *ks) ks8851_dbg_dumpkkt(ks, rxpkt); skb->protocol = eth_type_trans(skb, ks->netdev); - __netif_rx(skb); + __skb_queue_tail(rxq, skb); ks->netdev->stats.rx_packets++; ks->netdev->stats.rx_bytes += rxlen; @@ -326,11 +327,11 @@ static void ks8851_rx_pkts(struct ks8851_net *ks) static irqreturn_t ks8851_irq(int irq, void *_ks) { struct ks8851_net *ks = _ks; + struct sk_buff_head rxq; unsigned handled = 0; unsigned long flags; unsigned int status; - - local_bh_disable(); + struct sk_buff *skb; ks8851_lock(ks, &flags); @@ -384,7 +385,8 @@ static irqreturn_t ks8851_irq(int irq, void *_ks) * from the device so do not bother masking just the RX * from the device. */ - ks8851_rx_pkts(ks); + __skb_queue_head_init(&rxq); + ks8851_rx_pkts(ks, &rxq); } /* if something stopped the rx process, probably due to wanting @@ -408,7 +410,9 @@ static irqreturn_t ks8851_irq(int irq, void *_ks) if (status & IRQ_LCI) mii_check_link(&ks->mii); - local_bh_enable(); + if (status & IRQ_RXI) + while ((skb = __skb_dequeue(&rxq))) + netif_rx(skb); return IRQ_HANDLED; } -- cgit v1.2.3 From 1aec77b2bb2ed1db0f5efc61c4c1ca3813307489 Mon Sep 17 00:00:00 2001 From: Roded Zats Date: Thu, 2 May 2024 18:57:51 +0300 Subject: rtnetlink: Correct nested IFLA_VF_VLAN_LIST attribute validation Each attribute inside a nested IFLA_VF_VLAN_LIST is assumed to be a struct ifla_vf_vlan_info so the size of such attribute needs to be at least of sizeof(struct ifla_vf_vlan_info) which is 14 bytes. The current size validation in do_setvfinfo is against NLA_HDRLEN (4 bytes) which is less than sizeof(struct ifla_vf_vlan_info) so this validation is not enough and a too small attribute might be cast to a struct ifla_vf_vlan_info, this might result in an out of bands read access when accessing the saved (casted) entry in ivvl. Fixes: 79aab093a0b5 ("net: Update API for VF vlan protocol 802.1ad support") Signed-off-by: Roded Zats Reviewed-by: Donald Hunter Link: https://lore.kernel.org/r/20240502155751.75705-1-rzats@paloaltonetworks.com Signed-off-by: Jakub Kicinski --- net/core/rtnetlink.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/core/rtnetlink.c b/net/core/rtnetlink.c index a3d7847ce69d..8ba6a4e4be26 100644 --- a/net/core/rtnetlink.c +++ b/net/core/rtnetlink.c @@ -2530,7 +2530,7 @@ static int do_setvfinfo(struct net_device *dev, struct nlattr **tb) nla_for_each_nested(attr, tb[IFLA_VF_VLAN_LIST], rem) { if (nla_type(attr) != IFLA_VF_VLAN_INFO || - nla_len(attr) < NLA_HDRLEN) { + nla_len(attr) < sizeof(struct ifla_vf_vlan_info)) { return -EINVAL; } if (len >= MAX_VLAN_LIST_LEN) -- cgit v1.2.3 From fa870b45b08ad3a50a305b8f9f5896a5c5f565bc Mon Sep 17 00:00:00 2001 From: Potnuri Bharat Teja Date: Thu, 2 May 2024 14:42:09 -0400 Subject: MAINTAINERS: update cxgb4 and cxgb3 network drivers maintainer Add myself(Bharat) as maintainer for cxgb4 and cxgb3 network drivers. Signed-off-by: Potnuri Bharat Teja Link: https://lore.kernel.org/r/20240502184209.2723379-1-bharat@chelsio.com Signed-off-by: Jakub Kicinski --- MAINTAINERS | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index ec0284125e8f..05720fcc95cb 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -5709,7 +5709,7 @@ Q: http://patchwork.linuxtv.org/project/linux-media/list/ F: drivers/media/dvb-frontends/cxd2820r* CXGB3 ETHERNET DRIVER (CXGB3) -M: Raju Rangoju +M: Potnuri Bharat Teja L: netdev@vger.kernel.org S: Supported W: http://www.chelsio.com @@ -5730,7 +5730,7 @@ W: http://www.chelsio.com F: drivers/crypto/chelsio CXGB4 ETHERNET DRIVER (CXGB4) -M: Raju Rangoju +M: Potnuri Bharat Teja L: netdev@vger.kernel.org S: Supported W: http://www.chelsio.com @@ -5759,7 +5759,7 @@ F: drivers/infiniband/hw/cxgb4/ F: include/uapi/rdma/cxgb4-abi.h CXGB4VF ETHERNET DRIVER (CXGB4VF) -M: Raju Rangoju +M: Potnuri Bharat Teja L: netdev@vger.kernel.org S: Supported W: http://www.chelsio.com -- cgit v1.2.3 From b63db58e2fa5d6963db9c45df88e60060f0ff35f Mon Sep 17 00:00:00 2001 From: "Steven Rostedt (Google)" Date: Thu, 2 May 2024 09:03:15 -0400 Subject: eventfs/tracing: Add callback for release of an eventfs_inode MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Synthetic events create and destroy tracefs files when they are created and removed. The tracing subsystem has its own file descriptor representing the state of the events attached to the tracefs files. There's a race between the eventfs files and this file descriptor of the tracing system where the following can cause an issue: With two scripts 'A' and 'B' doing: Script 'A': echo "hello int aaa" > /sys/kernel/tracing/synthetic_events while : do echo 0 > /sys/kernel/tracing/events/synthetic/hello/enable done Script 'B': echo > /sys/kernel/tracing/synthetic_events Script 'A' creates a synthetic event "hello" and then just writes zero into its enable file. Script 'B' removes all synthetic events (including the newly created "hello" event). What happens is that the opening of the "enable" file has: { struct trace_event_file *file = inode->i_private; int ret; ret = tracing_check_open_get_tr(file->tr); [..] But deleting the events frees the "file" descriptor, and a "use after free" happens with the dereference at "file->tr". The file descriptor does have a reference counter, but there needs to be a way to decrement it from the eventfs when the eventfs_inode is removed that represents this file descriptor. Add an optional "release" callback to the eventfs_entry array structure, that gets called when the eventfs file is about to be removed. This allows for the creating on the eventfs file to increment the tracing file descriptor ref counter. When the eventfs file is deleted, it can call the release function that will call the put function for the tracing file descriptor. This will protect the tracing file from being freed while a eventfs file that references it is being opened. Link: https://lore.kernel.org/linux-trace-kernel/20240426073410.17154-1-Tze-nan.Wu@mediatek.com/ Link: https://lore.kernel.org/linux-trace-kernel/20240502090315.448cba46@gandalf.local.home Cc: stable@vger.kernel.org Cc: Masami Hiramatsu Cc: Mathieu Desnoyers Fixes: 5790b1fb3d672 ("eventfs: Remove eventfs_file and just use eventfs_inode") Reported-by: Tze-nan wu Tested-by: Tze-nan Wu (吳澤南) Signed-off-by: Steven Rostedt (Google) --- fs/tracefs/event_inode.c | 23 +++++++++++++++++++++-- include/linux/tracefs.h | 3 +++ kernel/trace/trace_events.c | 12 ++++++++++++ 3 files changed, 36 insertions(+), 2 deletions(-) diff --git a/fs/tracefs/event_inode.c b/fs/tracefs/event_inode.c index 894c6ca1e500..f5510e26f0f6 100644 --- a/fs/tracefs/event_inode.c +++ b/fs/tracefs/event_inode.c @@ -84,10 +84,17 @@ enum { static void release_ei(struct kref *ref) { struct eventfs_inode *ei = container_of(ref, struct eventfs_inode, kref); + const struct eventfs_entry *entry; struct eventfs_root_inode *rei; WARN_ON_ONCE(!ei->is_freed); + for (int i = 0; i < ei->nr_entries; i++) { + entry = &ei->entries[i]; + if (entry->release) + entry->release(entry->name, ei->data); + } + kfree(ei->entry_attrs); kfree_const(ei->name); if (ei->is_events) { @@ -112,6 +119,18 @@ static inline void free_ei(struct eventfs_inode *ei) } } +/* + * Called when creation of an ei fails, do not call release() functions. + */ +static inline void cleanup_ei(struct eventfs_inode *ei) +{ + if (ei) { + /* Set nr_entries to 0 to prevent release() function being called */ + ei->nr_entries = 0; + free_ei(ei); + } +} + static inline struct eventfs_inode *get_ei(struct eventfs_inode *ei) { if (ei) @@ -734,7 +753,7 @@ struct eventfs_inode *eventfs_create_dir(const char *name, struct eventfs_inode /* Was the parent freed? */ if (list_empty(&ei->list)) { - free_ei(ei); + cleanup_ei(ei); ei = NULL; } return ei; @@ -835,7 +854,7 @@ struct eventfs_inode *eventfs_create_events_dir(const char *name, struct dentry return ei; fail: - free_ei(ei); + cleanup_ei(ei); tracefs_failed_creating(dentry); return ERR_PTR(-ENOMEM); } diff --git a/include/linux/tracefs.h b/include/linux/tracefs.h index 7a5fe17b6bf9..d03f74658716 100644 --- a/include/linux/tracefs.h +++ b/include/linux/tracefs.h @@ -62,6 +62,8 @@ struct eventfs_file; typedef int (*eventfs_callback)(const char *name, umode_t *mode, void **data, const struct file_operations **fops); +typedef void (*eventfs_release)(const char *name, void *data); + /** * struct eventfs_entry - dynamically created eventfs file call back handler * @name: Then name of the dynamic file in an eventfs directory @@ -72,6 +74,7 @@ typedef int (*eventfs_callback)(const char *name, umode_t *mode, void **data, struct eventfs_entry { const char *name; eventfs_callback callback; + eventfs_release release; }; struct eventfs_inode; diff --git a/kernel/trace/trace_events.c b/kernel/trace/trace_events.c index 52f75c36bbca..6ef29eba90ce 100644 --- a/kernel/trace/trace_events.c +++ b/kernel/trace/trace_events.c @@ -2552,6 +2552,14 @@ static int event_callback(const char *name, umode_t *mode, void **data, return 0; } +/* The file is incremented on creation and freeing the enable file decrements it */ +static void event_release(const char *name, void *data) +{ + struct trace_event_file *file = data; + + event_file_put(file); +} + static int event_create_dir(struct eventfs_inode *parent, struct trace_event_file *file) { @@ -2566,6 +2574,7 @@ event_create_dir(struct eventfs_inode *parent, struct trace_event_file *file) { .name = "enable", .callback = event_callback, + .release = event_release, }, { .name = "filter", @@ -2634,6 +2643,9 @@ event_create_dir(struct eventfs_inode *parent, struct trace_event_file *file) return ret; } + /* Gets decremented on freeing of the "enable" file */ + event_file_get(file); + return 0; } -- cgit v1.2.3 From ee4e0379475e4fe723986ae96293e465014fa8d9 Mon Sep 17 00:00:00 2001 From: "Steven Rostedt (Google)" Date: Thu, 2 May 2024 16:08:22 -0400 Subject: eventfs: Free all of the eventfs_inode after RCU The freeing of eventfs_inode via a kfree_rcu() callback. But the content of the eventfs_inode was being freed after the last kref. This is dangerous, as changes are being made that can access the content of an eventfs_inode from an RCU loop. Instead of using kfree_rcu() use call_rcu() that calls a function to do all the freeing of the eventfs_inode after a RCU grace period has expired. Link: https://lore.kernel.org/linux-trace-kernel/20240502200905.370261163@goodmis.org Cc: stable@vger.kernel.org Cc: Masami Hiramatsu Cc: Mark Rutland Cc: Mathieu Desnoyers Cc: Andrew Morton Fixes: 43aa6f97c2d03 ("eventfs: Get rid of dentry pointers without refcounts") Signed-off-by: Steven Rostedt (Google) --- fs/tracefs/event_inode.c | 25 ++++++++++++++++--------- 1 file changed, 16 insertions(+), 9 deletions(-) diff --git a/fs/tracefs/event_inode.c b/fs/tracefs/event_inode.c index f5510e26f0f6..cc8b838bbe62 100644 --- a/fs/tracefs/event_inode.c +++ b/fs/tracefs/event_inode.c @@ -73,6 +73,21 @@ enum { #define EVENTFS_MODE_MASK (EVENTFS_SAVE_MODE - 1) +static void free_ei_rcu(struct rcu_head *rcu) +{ + struct eventfs_inode *ei = container_of(rcu, struct eventfs_inode, rcu); + struct eventfs_root_inode *rei; + + kfree(ei->entry_attrs); + kfree_const(ei->name); + if (ei->is_events) { + rei = get_root_inode(ei); + kfree(rei); + } else { + kfree(ei); + } +} + /* * eventfs_inode reference count management. * @@ -85,7 +100,6 @@ static void release_ei(struct kref *ref) { struct eventfs_inode *ei = container_of(ref, struct eventfs_inode, kref); const struct eventfs_entry *entry; - struct eventfs_root_inode *rei; WARN_ON_ONCE(!ei->is_freed); @@ -95,14 +109,7 @@ static void release_ei(struct kref *ref) entry->release(entry->name, ei->data); } - kfree(ei->entry_attrs); - kfree_const(ei->name); - if (ei->is_events) { - rei = get_root_inode(ei); - kfree_rcu(rei, ei.rcu); - } else { - kfree_rcu(ei, rcu); - } + call_rcu(&ei->rcu, free_ei_rcu); } static inline void put_ei(struct eventfs_inode *ei) -- cgit v1.2.3 From baa23a8d4360d981a49913841a726edede5cdd54 Mon Sep 17 00:00:00 2001 From: "Steven Rostedt (Google)" Date: Thu, 2 May 2024 16:08:23 -0400 Subject: tracefs: Reset permissions on remount if permissions are options There's an inconsistency with the way permissions are handled in tracefs. Because the permissions are generated when accessed, they default to the root inode's permission if they were never set by the user. If the user sets the permissions, then a flag is set and the permissions are saved via the inode (for tracefs files) or an internal attribute field (for eventfs). But if a remount happens that specify the permissions, all the files that were not changed by the user gets updated, but the ones that were are not. If the user were to remount the file system with a given permission, then all files and directories within that file system should be updated. This can cause security issues if a file's permission was updated but the admin forgot about it. They could incorrectly think that remounting with permissions set would update all files, but miss some. For example: # cd /sys/kernel/tracing # chgrp 1002 current_tracer # ls -l [..] -rw-r----- 1 root root 0 May 1 21:25 buffer_size_kb -rw-r----- 1 root root 0 May 1 21:25 buffer_subbuf_size_kb -r--r----- 1 root root 0 May 1 21:25 buffer_total_size_kb -rw-r----- 1 root lkp 0 May 1 21:25 current_tracer -rw-r----- 1 root root 0 May 1 21:25 dynamic_events -r--r----- 1 root root 0 May 1 21:25 dyn_ftrace_total_info -r--r----- 1 root root 0 May 1 21:25 enabled_functions Where current_tracer now has group "lkp". # mount -o remount,gid=1001 . # ls -l -rw-r----- 1 root tracing 0 May 1 21:25 buffer_size_kb -rw-r----- 1 root tracing 0 May 1 21:25 buffer_subbuf_size_kb -r--r----- 1 root tracing 0 May 1 21:25 buffer_total_size_kb -rw-r----- 1 root lkp 0 May 1 21:25 current_tracer -rw-r----- 1 root tracing 0 May 1 21:25 dynamic_events -r--r----- 1 root tracing 0 May 1 21:25 dyn_ftrace_total_info -r--r----- 1 root tracing 0 May 1 21:25 enabled_functions Everything changed but the "current_tracer". Add a new link list that keeps track of all the tracefs_inodes which has the permission flags that tell if the file/dir should use the root inode's permission or not. Then on remount, clear all the flags so that the default behavior of using the root inode's permission is done for all files and directories. Link: https://lore.kernel.org/linux-trace-kernel/20240502200905.529542160@goodmis.org Cc: stable@vger.kernel.org Cc: Masami Hiramatsu Cc: Mark Rutland Cc: Mathieu Desnoyers Cc: Andrew Morton Fixes: 8186fff7ab649 ("tracefs/eventfs: Use root and instance inodes as default ownership") Signed-off-by: Steven Rostedt (Google) --- fs/tracefs/event_inode.c | 29 +++++++++++++++++++++ fs/tracefs/inode.c | 65 +++++++++++++++++++++++++++++++++++++++++++++++- fs/tracefs/internal.h | 7 +++++- 3 files changed, 99 insertions(+), 2 deletions(-) diff --git a/fs/tracefs/event_inode.c b/fs/tracefs/event_inode.c index cc8b838bbe62..15a2a9c3c62b 100644 --- a/fs/tracefs/event_inode.c +++ b/fs/tracefs/event_inode.c @@ -308,6 +308,35 @@ static const struct file_operations eventfs_file_operations = { .llseek = generic_file_llseek, }; +/* + * On a remount of tracefs, if UID or GID options are set, then + * the mount point inode permissions should be used. + * Reset the saved permission flags appropriately. + */ +void eventfs_remount(struct tracefs_inode *ti, bool update_uid, bool update_gid) +{ + struct eventfs_inode *ei = ti->private; + + if (!ei) + return; + + if (update_uid) + ei->attr.mode &= ~EVENTFS_SAVE_UID; + + if (update_gid) + ei->attr.mode &= ~EVENTFS_SAVE_GID; + + if (!ei->entry_attrs) + return; + + for (int i = 0; i < ei->nr_entries; i++) { + if (update_uid) + ei->entry_attrs[i].mode &= ~EVENTFS_SAVE_UID; + if (update_gid) + ei->entry_attrs[i].mode &= ~EVENTFS_SAVE_GID; + } +} + /* Return the evenfs_inode of the "events" directory */ static struct eventfs_inode *eventfs_find_events(struct dentry *dentry) { diff --git a/fs/tracefs/inode.c b/fs/tracefs/inode.c index 5545e6bf7d26..52aa14bd2994 100644 --- a/fs/tracefs/inode.c +++ b/fs/tracefs/inode.c @@ -30,20 +30,47 @@ static struct vfsmount *tracefs_mount; static int tracefs_mount_count; static bool tracefs_registered; +/* + * Keep track of all tracefs_inodes in order to update their + * flags if necessary on a remount. + */ +static DEFINE_SPINLOCK(tracefs_inode_lock); +static LIST_HEAD(tracefs_inodes); + static struct inode *tracefs_alloc_inode(struct super_block *sb) { struct tracefs_inode *ti; + unsigned long flags; ti = kmem_cache_alloc(tracefs_inode_cachep, GFP_KERNEL); if (!ti) return NULL; + spin_lock_irqsave(&tracefs_inode_lock, flags); + list_add_rcu(&ti->list, &tracefs_inodes); + spin_unlock_irqrestore(&tracefs_inode_lock, flags); + return &ti->vfs_inode; } +static void tracefs_free_inode_rcu(struct rcu_head *rcu) +{ + struct tracefs_inode *ti; + + ti = container_of(rcu, struct tracefs_inode, rcu); + kmem_cache_free(tracefs_inode_cachep, ti); +} + static void tracefs_free_inode(struct inode *inode) { - kmem_cache_free(tracefs_inode_cachep, get_tracefs(inode)); + struct tracefs_inode *ti = get_tracefs(inode); + unsigned long flags; + + spin_lock_irqsave(&tracefs_inode_lock, flags); + list_del_rcu(&ti->list); + spin_unlock_irqrestore(&tracefs_inode_lock, flags); + + call_rcu(&ti->rcu, tracefs_free_inode_rcu); } static ssize_t default_read_file(struct file *file, char __user *buf, @@ -313,6 +340,8 @@ static int tracefs_apply_options(struct super_block *sb, bool remount) struct tracefs_fs_info *fsi = sb->s_fs_info; struct inode *inode = d_inode(sb->s_root); struct tracefs_mount_opts *opts = &fsi->mount_opts; + struct tracefs_inode *ti; + bool update_uid, update_gid; umode_t tmp_mode; /* @@ -332,6 +361,25 @@ static int tracefs_apply_options(struct super_block *sb, bool remount) if (!remount || opts->opts & BIT(Opt_gid)) inode->i_gid = opts->gid; + if (remount && (opts->opts & BIT(Opt_uid) || opts->opts & BIT(Opt_gid))) { + + update_uid = opts->opts & BIT(Opt_uid); + update_gid = opts->opts & BIT(Opt_gid); + + rcu_read_lock(); + list_for_each_entry_rcu(ti, &tracefs_inodes, list) { + if (update_uid) + ti->flags &= ~TRACEFS_UID_PERM_SET; + + if (update_gid) + ti->flags &= ~TRACEFS_GID_PERM_SET; + + if (ti->flags & TRACEFS_EVENT_INODE) + eventfs_remount(ti, update_uid, update_gid); + } + rcu_read_unlock(); + } + return 0; } @@ -398,7 +446,22 @@ static int tracefs_d_revalidate(struct dentry *dentry, unsigned int flags) return !(ei && ei->is_freed); } +static void tracefs_d_iput(struct dentry *dentry, struct inode *inode) +{ + struct tracefs_inode *ti = get_tracefs(inode); + + /* + * This inode is being freed and cannot be used for + * eventfs. Clear the flag so that it doesn't call into + * eventfs during the remount flag updates. The eventfs_inode + * gets freed after an RCU cycle, so the content will still + * be safe if the iteration is going on now. + */ + ti->flags &= ~TRACEFS_EVENT_INODE; +} + static const struct dentry_operations tracefs_dentry_operations = { + .d_iput = tracefs_d_iput, .d_revalidate = tracefs_d_revalidate, .d_release = tracefs_d_release, }; diff --git a/fs/tracefs/internal.h b/fs/tracefs/internal.h index 15c26f9aaad4..29f0c999975b 100644 --- a/fs/tracefs/internal.h +++ b/fs/tracefs/internal.h @@ -11,8 +11,12 @@ enum { }; struct tracefs_inode { - struct inode vfs_inode; + union { + struct inode vfs_inode; + struct rcu_head rcu; + }; /* The below gets initialized with memset_after(ti, 0, vfs_inode) */ + struct list_head list; unsigned long flags; void *private; }; @@ -73,6 +77,7 @@ struct dentry *tracefs_end_creating(struct dentry *dentry); struct dentry *tracefs_failed_creating(struct dentry *dentry); struct inode *tracefs_get_inode(struct super_block *sb); +void eventfs_remount(struct tracefs_inode *ti, bool update_uid, bool update_gid); void eventfs_d_release(struct dentry *dentry); #endif /* _TRACEFS_INTERNAL_H */ -- cgit v1.2.3 From 6599bd5517be66c8344f869f3ca3a91bc10f2b9e Mon Sep 17 00:00:00 2001 From: "Steven Rostedt (Google)" Date: Thu, 2 May 2024 16:08:24 -0400 Subject: tracefs: Still use mount point as default permissions for instances If the instances directory's permissions were never change, then have it and its children use the mount point permissions as the default. Currently, the permissions of instance directories are determined by the instance directory's permissions itself. But if the tracefs file system is remounted and changes the permissions, the instance directory and its children should use the new permission. But because both the instance directory and its children use the instance directory's inode for permissions, it misses the update. To demonstrate this: # cd /sys/kernel/tracing/ # mkdir instances/foo # ls -ld instances/foo drwxr-x--- 5 root root 0 May 1 19:07 instances/foo # ls -ld instances drwxr-x--- 3 root root 0 May 1 18:57 instances # ls -ld current_tracer -rw-r----- 1 root root 0 May 1 18:57 current_tracer # mount -o remount,gid=1002 . # ls -ld instances drwxr-x--- 3 root root 0 May 1 18:57 instances # ls -ld instances/foo/ drwxr-x--- 5 root root 0 May 1 19:07 instances/foo/ # ls -ld current_tracer -rw-r----- 1 root lkp 0 May 1 18:57 current_tracer Notice that changing the group id to that of "lkp" did not affect the instances directory nor its children. It should have been: # ls -ld current_tracer -rw-r----- 1 root root 0 May 1 19:19 current_tracer # ls -ld instances/foo/ drwxr-x--- 5 root root 0 May 1 19:25 instances/foo/ # ls -ld instances drwxr-x--- 3 root root 0 May 1 19:19 instances # mount -o remount,gid=1002 . # ls -ld current_tracer -rw-r----- 1 root lkp 0 May 1 19:19 current_tracer # ls -ld instances drwxr-x--- 3 root lkp 0 May 1 19:19 instances # ls -ld instances/foo/ drwxr-x--- 5 root lkp 0 May 1 19:25 instances/foo/ Where all files were updated by the remount gid update. Link: https://lore.kernel.org/linux-trace-kernel/20240502200905.686838327@goodmis.org Cc: stable@vger.kernel.org Cc: Masami Hiramatsu Cc: Mark Rutland Cc: Mathieu Desnoyers Cc: Andrew Morton Fixes: 8186fff7ab649 ("tracefs/eventfs: Use root and instance inodes as default ownership") Signed-off-by: Steven Rostedt (Google) --- fs/tracefs/inode.c | 27 +++++++++++++++++++++++++-- 1 file changed, 25 insertions(+), 2 deletions(-) diff --git a/fs/tracefs/inode.c b/fs/tracefs/inode.c index 52aa14bd2994..417c840e6403 100644 --- a/fs/tracefs/inode.c +++ b/fs/tracefs/inode.c @@ -180,16 +180,39 @@ static void set_tracefs_inode_owner(struct inode *inode) { struct tracefs_inode *ti = get_tracefs(inode); struct inode *root_inode = ti->private; + kuid_t uid; + kgid_t gid; + + uid = root_inode->i_uid; + gid = root_inode->i_gid; + + /* + * If the root is not the mount point, then check the root's + * permissions. If it was never set, then default to the + * mount point. + */ + if (root_inode != d_inode(root_inode->i_sb->s_root)) { + struct tracefs_inode *rti; + + rti = get_tracefs(root_inode); + root_inode = d_inode(root_inode->i_sb->s_root); + + if (!(rti->flags & TRACEFS_UID_PERM_SET)) + uid = root_inode->i_uid; + + if (!(rti->flags & TRACEFS_GID_PERM_SET)) + gid = root_inode->i_gid; + } /* * If this inode has never been referenced, then update * the permissions to the superblock. */ if (!(ti->flags & TRACEFS_UID_PERM_SET)) - inode->i_uid = root_inode->i_uid; + inode->i_uid = uid; if (!(ti->flags & TRACEFS_GID_PERM_SET)) - inode->i_gid = root_inode->i_gid; + inode->i_gid = gid; } static int tracefs_permission(struct mnt_idmap *idmap, -- cgit v1.2.3 From d53891d348ac3eceaf48f4732a1f4f5c0e0a55ce Mon Sep 17 00:00:00 2001 From: "Steven Rostedt (Google)" Date: Thu, 2 May 2024 16:08:25 -0400 Subject: eventfs: Do not differentiate the toplevel events directory The toplevel events directory is really no different than the events directory of instances. Having the two be different caused inconsistencies and made it harder to fix the permissions bugs. Make all events directories act the same. Link: https://lore.kernel.org/linux-trace-kernel/20240502200905.846448710@goodmis.org Cc: stable@vger.kernel.org Cc: Masami Hiramatsu Cc: Mark Rutland Cc: Mathieu Desnoyers Cc: Andrew Morton Fixes: 8186fff7ab649 ("tracefs/eventfs: Use root and instance inodes as default ownership") Signed-off-by: Steven Rostedt (Google) --- fs/tracefs/event_inode.c | 29 ++++++++--------------------- fs/tracefs/internal.h | 7 +++---- 2 files changed, 11 insertions(+), 25 deletions(-) diff --git a/fs/tracefs/event_inode.c b/fs/tracefs/event_inode.c index 15a2a9c3c62b..9dacf65c0b6e 100644 --- a/fs/tracefs/event_inode.c +++ b/fs/tracefs/event_inode.c @@ -68,7 +68,6 @@ enum { EVENTFS_SAVE_MODE = BIT(16), EVENTFS_SAVE_UID = BIT(17), EVENTFS_SAVE_GID = BIT(18), - EVENTFS_TOPLEVEL = BIT(19), }; #define EVENTFS_MODE_MASK (EVENTFS_SAVE_MODE - 1) @@ -239,14 +238,10 @@ static int eventfs_set_attr(struct mnt_idmap *idmap, struct dentry *dentry, return ret; } -static void update_top_events_attr(struct eventfs_inode *ei, struct super_block *sb) +static void update_events_attr(struct eventfs_inode *ei, struct super_block *sb) { struct inode *root; - /* Only update if the "events" was on the top level */ - if (!ei || !(ei->attr.mode & EVENTFS_TOPLEVEL)) - return; - /* Get the tracefs root inode. */ root = d_inode(sb->s_root); ei->attr.uid = root->i_uid; @@ -259,10 +254,10 @@ static void set_top_events_ownership(struct inode *inode) struct eventfs_inode *ei = ti->private; /* The top events directory doesn't get automatically updated */ - if (!ei || !ei->is_events || !(ei->attr.mode & EVENTFS_TOPLEVEL)) + if (!ei || !ei->is_events) return; - update_top_events_attr(ei, inode->i_sb); + update_events_attr(ei, inode->i_sb); if (!(ei->attr.mode & EVENTFS_SAVE_UID)) inode->i_uid = ei->attr.uid; @@ -291,7 +286,7 @@ static int eventfs_permission(struct mnt_idmap *idmap, return generic_permission(idmap, inode, mask); } -static const struct inode_operations eventfs_root_dir_inode_operations = { +static const struct inode_operations eventfs_dir_inode_operations = { .lookup = eventfs_root_lookup, .setattr = eventfs_set_attr, .getattr = eventfs_get_attr, @@ -359,7 +354,7 @@ static struct eventfs_inode *eventfs_find_events(struct dentry *dentry) // Walk upwards until you find the events inode } while (!ei->is_events); - update_top_events_attr(ei, dentry->d_sb); + update_events_attr(ei, dentry->d_sb); return ei; } @@ -465,7 +460,7 @@ static struct dentry *lookup_dir_entry(struct dentry *dentry, update_inode_attr(dentry, inode, &ei->attr, S_IFDIR | S_IRWXU | S_IRUGO | S_IXUGO); - inode->i_op = &eventfs_root_dir_inode_operations; + inode->i_op = &eventfs_dir_inode_operations; inode->i_fop = &eventfs_file_operations; /* All directories will have the same inode number */ @@ -845,14 +840,6 @@ struct eventfs_inode *eventfs_create_events_dir(const char *name, struct dentry uid = d_inode(dentry->d_parent)->i_uid; gid = d_inode(dentry->d_parent)->i_gid; - /* - * If the events directory is of the top instance, then parent - * is NULL. Set the attr.mode to reflect this and its permissions will - * default to the tracefs root dentry. - */ - if (!parent) - ei->attr.mode = EVENTFS_TOPLEVEL; - /* This is used as the default ownership of the files and directories */ ei->attr.uid = uid; ei->attr.gid = gid; @@ -861,13 +848,13 @@ struct eventfs_inode *eventfs_create_events_dir(const char *name, struct dentry INIT_LIST_HEAD(&ei->list); ti = get_tracefs(inode); - ti->flags |= TRACEFS_EVENT_INODE | TRACEFS_EVENT_TOP_INODE; + ti->flags |= TRACEFS_EVENT_INODE; ti->private = ei; inode->i_mode = S_IFDIR | S_IRWXU | S_IRUGO | S_IXUGO; inode->i_uid = uid; inode->i_gid = gid; - inode->i_op = &eventfs_root_dir_inode_operations; + inode->i_op = &eventfs_dir_inode_operations; inode->i_fop = &eventfs_file_operations; dentry->d_fsdata = get_ei(ei); diff --git a/fs/tracefs/internal.h b/fs/tracefs/internal.h index 29f0c999975b..f704d8348357 100644 --- a/fs/tracefs/internal.h +++ b/fs/tracefs/internal.h @@ -4,10 +4,9 @@ enum { TRACEFS_EVENT_INODE = BIT(1), - TRACEFS_EVENT_TOP_INODE = BIT(2), - TRACEFS_GID_PERM_SET = BIT(3), - TRACEFS_UID_PERM_SET = BIT(4), - TRACEFS_INSTANCE_INODE = BIT(5), + TRACEFS_GID_PERM_SET = BIT(2), + TRACEFS_UID_PERM_SET = BIT(3), + TRACEFS_INSTANCE_INODE = BIT(4), }; struct tracefs_inode { -- cgit v1.2.3 From 22e61e15af731dbe46704c775d2335e56fcef4e9 Mon Sep 17 00:00:00 2001 From: "Steven Rostedt (Google)" Date: Thu, 2 May 2024 16:08:26 -0400 Subject: eventfs: Do not treat events directory different than other directories Treat the events directory the same as other directories when it comes to permissions. The events directory was considered different because it's dentry is persistent, whereas the other directory dentries are created when accessed. But the way tracefs now does its ownership by using the root dentry's permissions as the default permissions, the events directory can get out of sync when a remount is performed setting the group and user permissions. Remove the special case for the events directory on setting the attributes. This allows the updates caused by remount to work properly as well as simplifies the code. Link: https://lore.kernel.org/linux-trace-kernel/20240502200906.002923579@goodmis.org Cc: stable@vger.kernel.org Cc: Masami Hiramatsu Cc: Mark Rutland Cc: Mathieu Desnoyers Cc: Andrew Morton Fixes: 8186fff7ab649 ("tracefs/eventfs: Use root and instance inodes as default ownership") Signed-off-by: Steven Rostedt (Google) --- fs/tracefs/event_inode.c | 16 +--------------- 1 file changed, 1 insertion(+), 15 deletions(-) diff --git a/fs/tracefs/event_inode.c b/fs/tracefs/event_inode.c index 9dacf65c0b6e..6e08405892ae 100644 --- a/fs/tracefs/event_inode.c +++ b/fs/tracefs/event_inode.c @@ -206,21 +206,7 @@ static int eventfs_set_attr(struct mnt_idmap *idmap, struct dentry *dentry, * determined by the parent directory. */ if (dentry->d_inode->i_mode & S_IFDIR) { - /* - * The events directory dentry is never freed, unless its - * part of an instance that is deleted. It's attr is the - * default for its child files and directories. - * Do not update it. It's not used for its own mode or ownership. - */ - if (ei->is_events) { - /* But it still needs to know if it was modified */ - if (iattr->ia_valid & ATTR_UID) - ei->attr.mode |= EVENTFS_SAVE_UID; - if (iattr->ia_valid & ATTR_GID) - ei->attr.mode |= EVENTFS_SAVE_GID; - } else { - update_attr(&ei->attr, iattr); - } + update_attr(&ei->attr, iattr); } else { name = dentry->d_name.name; -- cgit v1.2.3 From d57cf30c4c07837799edec949102b0adf58bae79 Mon Sep 17 00:00:00 2001 From: "Steven Rostedt (Google)" Date: Thu, 2 May 2024 16:08:27 -0400 Subject: eventfs: Have "events" directory get permissions from its parent The events directory gets its permissions from the root inode. But this can cause an inconsistency if the instances directory changes its permissions, as the permissions of the created directories under it should inherit the permissions of the instances directory when directories under it are created. Currently the behavior is: # cd /sys/kernel/tracing # chgrp 1002 instances # mkdir instances/foo # ls -l instances/foo [..] -r--r----- 1 root lkp 0 May 1 18:55 buffer_total_size_kb -rw-r----- 1 root lkp 0 May 1 18:55 current_tracer -rw-r----- 1 root lkp 0 May 1 18:55 error_log drwxr-xr-x 1 root root 0 May 1 18:55 events --w------- 1 root lkp 0 May 1 18:55 free_buffer drwxr-x--- 2 root lkp 0 May 1 18:55 options drwxr-x--- 10 root lkp 0 May 1 18:55 per_cpu -rw-r----- 1 root lkp 0 May 1 18:55 set_event All the files and directories under "foo" has the "lkp" group except the "events" directory. That's because its getting its default value from the mount point instead of its parent. Have the "events" directory make its default value based on its parent's permissions. That now gives: # ls -l instances/foo [..] -rw-r----- 1 root lkp 0 May 1 21:16 buffer_subbuf_size_kb -r--r----- 1 root lkp 0 May 1 21:16 buffer_total_size_kb -rw-r----- 1 root lkp 0 May 1 21:16 current_tracer -rw-r----- 1 root lkp 0 May 1 21:16 error_log drwxr-xr-x 1 root lkp 0 May 1 21:16 events --w------- 1 root lkp 0 May 1 21:16 free_buffer drwxr-x--- 2 root lkp 0 May 1 21:16 options drwxr-x--- 10 root lkp 0 May 1 21:16 per_cpu -rw-r----- 1 root lkp 0 May 1 21:16 set_event Link: https://lore.kernel.org/linux-trace-kernel/20240502200906.161887248@goodmis.org Cc: stable@vger.kernel.org Cc: Masami Hiramatsu Cc: Mark Rutland Cc: Mathieu Desnoyers Cc: Andrew Morton Fixes: 8186fff7ab649 ("tracefs/eventfs: Use root and instance inodes as default ownership") Signed-off-by: Steven Rostedt (Google) --- fs/tracefs/event_inode.c | 30 ++++++++++++++++++++++++------ 1 file changed, 24 insertions(+), 6 deletions(-) diff --git a/fs/tracefs/event_inode.c b/fs/tracefs/event_inode.c index 6e08405892ae..a878cea70f4c 100644 --- a/fs/tracefs/event_inode.c +++ b/fs/tracefs/event_inode.c @@ -37,6 +37,7 @@ static DEFINE_MUTEX(eventfs_mutex); struct eventfs_root_inode { struct eventfs_inode ei; + struct inode *parent_inode; struct dentry *events_dir; }; @@ -226,12 +227,23 @@ static int eventfs_set_attr(struct mnt_idmap *idmap, struct dentry *dentry, static void update_events_attr(struct eventfs_inode *ei, struct super_block *sb) { - struct inode *root; + struct eventfs_root_inode *rei; + struct inode *parent; + + rei = get_root_inode(ei); + + /* Use the parent inode permissions unless root set its permissions */ + parent = rei->parent_inode; - /* Get the tracefs root inode. */ - root = d_inode(sb->s_root); - ei->attr.uid = root->i_uid; - ei->attr.gid = root->i_gid; + if (rei->ei.attr.mode & EVENTFS_SAVE_UID) + ei->attr.uid = rei->ei.attr.uid; + else + ei->attr.uid = parent->i_uid; + + if (rei->ei.attr.mode & EVENTFS_SAVE_GID) + ei->attr.gid = rei->ei.attr.gid; + else + ei->attr.gid = parent->i_gid; } static void set_top_events_ownership(struct inode *inode) @@ -817,6 +829,7 @@ struct eventfs_inode *eventfs_create_events_dir(const char *name, struct dentry // Note: we have a ref to the dentry from tracefs_start_creating() rei = get_root_inode(ei); rei->events_dir = dentry; + rei->parent_inode = d_inode(dentry->d_sb->s_root); ei->entries = entries; ei->nr_entries = size; @@ -826,10 +839,15 @@ struct eventfs_inode *eventfs_create_events_dir(const char *name, struct dentry uid = d_inode(dentry->d_parent)->i_uid; gid = d_inode(dentry->d_parent)->i_gid; - /* This is used as the default ownership of the files and directories */ ei->attr.uid = uid; ei->attr.gid = gid; + /* + * When the "events" directory is created, it takes on the + * permissions of its parent. But can be reset on remount. + */ + ei->attr.mode |= EVENTFS_SAVE_UID | EVENTFS_SAVE_GID; + INIT_LIST_HEAD(&ei->children); INIT_LIST_HEAD(&ei->list); -- cgit v1.2.3 From cc00bc83f26eb8f2d8d9f56b949b62fd774d8432 Mon Sep 17 00:00:00 2001 From: Namjae Jeon Date: Wed, 1 May 2024 21:41:50 +0900 Subject: ksmbd: off ipv6only for both ipv4/ipv6 binding MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit ΕΛΕΝΗ reported that ksmbd binds to the IPV6 wildcard (::) by default for ipv4 and ipv6 binding. So IPV4 connections are successful only when the Linux system parameter bindv6only is set to 0 [default value]. If this parameter is set to 1, then the ipv6 wildcard only represents any IPV6 address. Samba creates different sockets for ipv4 and ipv6 by default. This patch off sk_ipv6only to support IPV4/IPV6 connections without creating two sockets. Cc: stable@vger.kernel.org Reported-by: ΕΛΕΝΗ ΤΖΑΒΕΛΛΑ Signed-off-by: Namjae Jeon Signed-off-by: Steve French --- fs/smb/server/transport_tcp.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/fs/smb/server/transport_tcp.c b/fs/smb/server/transport_tcp.c index 002a3f0dc7c5..6633fa78e9b9 100644 --- a/fs/smb/server/transport_tcp.c +++ b/fs/smb/server/transport_tcp.c @@ -448,6 +448,10 @@ static int create_socket(struct interface *iface) sin6.sin6_family = PF_INET6; sin6.sin6_addr = in6addr_any; sin6.sin6_port = htons(server_conf.tcp_port); + + lock_sock(ksmbd_socket->sk); + ksmbd_socket->sk->sk_ipv6only = false; + release_sock(ksmbd_socket->sk); } ksmbd_tcp_nodelay(ksmbd_socket); -- cgit v1.2.3 From 97c2ec64667bacc49881d2b2dd9afd4d1c3fbaeb Mon Sep 17 00:00:00 2001 From: Namjae Jeon Date: Wed, 1 May 2024 21:44:02 +0900 Subject: ksmbd: avoid to send duplicate lease break notifications This patch fixes generic/011 when enable smb2 leases. if ksmbd sends multiple notifications for a file, cifs increments the reference count of the file but it does not decrement the count by the failure of queue_work. So even if the file is closed, cifs does not send a SMB2_CLOSE request. Cc: stable@vger.kernel.org Signed-off-by: Namjae Jeon Signed-off-by: Steve French --- fs/smb/server/oplock.c | 21 +++++++++++++++------ 1 file changed, 15 insertions(+), 6 deletions(-) diff --git a/fs/smb/server/oplock.c b/fs/smb/server/oplock.c index 4978edfb15f9..6fd8cb7064dc 100644 --- a/fs/smb/server/oplock.c +++ b/fs/smb/server/oplock.c @@ -613,13 +613,23 @@ static int oplock_break_pending(struct oplock_info *opinfo, int req_op_level) if (opinfo->op_state == OPLOCK_CLOSING) return -ENOENT; - else if (!opinfo->is_lease && opinfo->level <= req_op_level) - return 1; + else if (opinfo->level <= req_op_level) { + if (opinfo->is_lease && + opinfo->o_lease->state != + (SMB2_LEASE_HANDLE_CACHING_LE | + SMB2_LEASE_READ_CACHING_LE)) + return 1; + } } - if (!opinfo->is_lease && opinfo->level <= req_op_level) { - wake_up_oplock_break(opinfo); - return 1; + if (opinfo->level <= req_op_level) { + if (opinfo->is_lease && + opinfo->o_lease->state != + (SMB2_LEASE_HANDLE_CACHING_LE | + SMB2_LEASE_READ_CACHING_LE)) { + wake_up_oplock_break(opinfo); + return 1; + } } return 0; } @@ -887,7 +897,6 @@ static int oplock_break(struct oplock_info *brk_opinfo, int req_op_level) struct lease *lease = brk_opinfo->o_lease; atomic_inc(&brk_opinfo->breaking_cnt); - err = oplock_break_pending(brk_opinfo, req_op_level); if (err) return err < 0 ? err : 0; -- cgit v1.2.3 From d1c189c6cb8b0fb7b5ee549237d27889c40c2f8b Mon Sep 17 00:00:00 2001 From: Namjae Jeon Date: Thu, 2 May 2024 10:07:50 +0900 Subject: ksmbd: use rwsem instead of rwlock for lease break lease break wait for lease break acknowledgment. rwsem is more suitable than unlock while traversing the list for parent lease break in ->m_op_list. Cc: stable@vger.kernel.org Signed-off-by: Namjae Jeon Signed-off-by: Steve French --- fs/smb/server/oplock.c | 30 +++++++++++------------------- fs/smb/server/smb2pdu.c | 4 ++-- fs/smb/server/smb_common.c | 4 ++-- fs/smb/server/vfs_cache.c | 28 ++++++++++++++-------------- fs/smb/server/vfs_cache.h | 2 +- 5 files changed, 30 insertions(+), 38 deletions(-) diff --git a/fs/smb/server/oplock.c b/fs/smb/server/oplock.c index 6fd8cb7064dc..c2abf109010d 100644 --- a/fs/smb/server/oplock.c +++ b/fs/smb/server/oplock.c @@ -207,9 +207,9 @@ static void opinfo_add(struct oplock_info *opinfo) { struct ksmbd_inode *ci = opinfo->o_fp->f_ci; - write_lock(&ci->m_lock); + down_write(&ci->m_lock); list_add_rcu(&opinfo->op_entry, &ci->m_op_list); - write_unlock(&ci->m_lock); + up_write(&ci->m_lock); } static void opinfo_del(struct oplock_info *opinfo) @@ -221,9 +221,9 @@ static void opinfo_del(struct oplock_info *opinfo) lease_del_list(opinfo); write_unlock(&lease_list_lock); } - write_lock(&ci->m_lock); + down_write(&ci->m_lock); list_del_rcu(&opinfo->op_entry); - write_unlock(&ci->m_lock); + up_write(&ci->m_lock); } static unsigned long opinfo_count(struct ksmbd_file *fp) @@ -526,21 +526,18 @@ static struct oplock_info *same_client_has_lease(struct ksmbd_inode *ci, * Compare lease key and client_guid to know request from same owner * of same client */ - read_lock(&ci->m_lock); + down_read(&ci->m_lock); list_for_each_entry(opinfo, &ci->m_op_list, op_entry) { if (!opinfo->is_lease || !opinfo->conn) continue; - read_unlock(&ci->m_lock); lease = opinfo->o_lease; ret = compare_guid_key(opinfo, client_guid, lctx->lease_key); if (ret) { m_opinfo = opinfo; /* skip upgrading lease about breaking lease */ - if (atomic_read(&opinfo->breaking_cnt)) { - read_lock(&ci->m_lock); + if (atomic_read(&opinfo->breaking_cnt)) continue; - } /* upgrading lease */ if ((atomic_read(&ci->op_count) + @@ -570,9 +567,8 @@ static struct oplock_info *same_client_has_lease(struct ksmbd_inode *ci, lease_none_upgrade(opinfo, lctx->req_state); } } - read_lock(&ci->m_lock); } - read_unlock(&ci->m_lock); + up_read(&ci->m_lock); return m_opinfo; } @@ -1114,7 +1110,7 @@ void smb_send_parent_lease_break_noti(struct ksmbd_file *fp, if (!p_ci) return; - read_lock(&p_ci->m_lock); + down_read(&p_ci->m_lock); list_for_each_entry(opinfo, &p_ci->m_op_list, op_entry) { if (opinfo->conn == NULL || !opinfo->is_lease) continue; @@ -1132,13 +1128,11 @@ void smb_send_parent_lease_break_noti(struct ksmbd_file *fp, continue; } - read_unlock(&p_ci->m_lock); oplock_break(opinfo, SMB2_OPLOCK_LEVEL_NONE); opinfo_conn_put(opinfo); - read_lock(&p_ci->m_lock); } } - read_unlock(&p_ci->m_lock); + up_read(&p_ci->m_lock); ksmbd_inode_put(p_ci); } @@ -1159,7 +1153,7 @@ void smb_lazy_parent_lease_break_close(struct ksmbd_file *fp) if (!p_ci) return; - read_lock(&p_ci->m_lock); + down_read(&p_ci->m_lock); list_for_each_entry(opinfo, &p_ci->m_op_list, op_entry) { if (opinfo->conn == NULL || !opinfo->is_lease) continue; @@ -1173,13 +1167,11 @@ void smb_lazy_parent_lease_break_close(struct ksmbd_file *fp) atomic_dec(&opinfo->conn->r_count); continue; } - read_unlock(&p_ci->m_lock); oplock_break(opinfo, SMB2_OPLOCK_LEVEL_NONE); opinfo_conn_put(opinfo); - read_lock(&p_ci->m_lock); } } - read_unlock(&p_ci->m_lock); + up_read(&p_ci->m_lock); ksmbd_inode_put(p_ci); } diff --git a/fs/smb/server/smb2pdu.c b/fs/smb/server/smb2pdu.c index 30229161b346..b6c5a8ea3887 100644 --- a/fs/smb/server/smb2pdu.c +++ b/fs/smb/server/smb2pdu.c @@ -3376,9 +3376,9 @@ int smb2_open(struct ksmbd_work *work) * after daccess, saccess, attrib_only, and stream are * initialized. */ - write_lock(&fp->f_ci->m_lock); + down_write(&fp->f_ci->m_lock); list_add(&fp->node, &fp->f_ci->m_fp_list); - write_unlock(&fp->f_ci->m_lock); + up_write(&fp->f_ci->m_lock); /* Check delete pending among previous fp before oplock break */ if (ksmbd_inode_pending_delete(fp)) { diff --git a/fs/smb/server/smb_common.c b/fs/smb/server/smb_common.c index fcaf373cc008..474dadf6b7b8 100644 --- a/fs/smb/server/smb_common.c +++ b/fs/smb/server/smb_common.c @@ -646,7 +646,7 @@ int ksmbd_smb_check_shared_mode(struct file *filp, struct ksmbd_file *curr_fp) * Lookup fp in master fp list, and check desired access and * shared mode between previous open and current open. */ - read_lock(&curr_fp->f_ci->m_lock); + down_read(&curr_fp->f_ci->m_lock); list_for_each_entry(prev_fp, &curr_fp->f_ci->m_fp_list, node) { if (file_inode(filp) != file_inode(prev_fp->filp)) continue; @@ -722,7 +722,7 @@ int ksmbd_smb_check_shared_mode(struct file *filp, struct ksmbd_file *curr_fp) break; } } - read_unlock(&curr_fp->f_ci->m_lock); + up_read(&curr_fp->f_ci->m_lock); return rc; } diff --git a/fs/smb/server/vfs_cache.c b/fs/smb/server/vfs_cache.c index 030f70700036..6cb599cd287e 100644 --- a/fs/smb/server/vfs_cache.c +++ b/fs/smb/server/vfs_cache.c @@ -165,7 +165,7 @@ static int ksmbd_inode_init(struct ksmbd_inode *ci, struct ksmbd_file *fp) ci->m_fattr = 0; INIT_LIST_HEAD(&ci->m_fp_list); INIT_LIST_HEAD(&ci->m_op_list); - rwlock_init(&ci->m_lock); + init_rwsem(&ci->m_lock); ci->m_de = fp->filp->f_path.dentry; return 0; } @@ -261,14 +261,14 @@ static void __ksmbd_inode_close(struct ksmbd_file *fp) } if (atomic_dec_and_test(&ci->m_count)) { - write_lock(&ci->m_lock); + down_write(&ci->m_lock); if (ci->m_flags & (S_DEL_ON_CLS | S_DEL_PENDING)) { ci->m_flags &= ~(S_DEL_ON_CLS | S_DEL_PENDING); - write_unlock(&ci->m_lock); + up_write(&ci->m_lock); ksmbd_vfs_unlink(filp); - write_lock(&ci->m_lock); + down_write(&ci->m_lock); } - write_unlock(&ci->m_lock); + up_write(&ci->m_lock); ksmbd_inode_free(ci); } @@ -289,9 +289,9 @@ static void __ksmbd_remove_fd(struct ksmbd_file_table *ft, struct ksmbd_file *fp if (!has_file_id(fp->volatile_id)) return; - write_lock(&fp->f_ci->m_lock); + down_write(&fp->f_ci->m_lock); list_del_init(&fp->node); - write_unlock(&fp->f_ci->m_lock); + up_write(&fp->f_ci->m_lock); write_lock(&ft->lock); idr_remove(ft->idr, fp->volatile_id); @@ -523,17 +523,17 @@ struct ksmbd_file *ksmbd_lookup_fd_inode(struct dentry *dentry) if (!ci) return NULL; - read_lock(&ci->m_lock); + down_read(&ci->m_lock); list_for_each_entry(lfp, &ci->m_fp_list, node) { if (inode == file_inode(lfp->filp)) { atomic_dec(&ci->m_count); lfp = ksmbd_fp_get(lfp); - read_unlock(&ci->m_lock); + up_read(&ci->m_lock); return lfp; } } atomic_dec(&ci->m_count); - read_unlock(&ci->m_lock); + up_read(&ci->m_lock); return NULL; } @@ -705,13 +705,13 @@ static bool session_fd_check(struct ksmbd_tree_connect *tcon, conn = fp->conn; ci = fp->f_ci; - write_lock(&ci->m_lock); + down_write(&ci->m_lock); list_for_each_entry_rcu(op, &ci->m_op_list, op_entry) { if (op->conn != conn) continue; op->conn = NULL; } - write_unlock(&ci->m_lock); + up_write(&ci->m_lock); fp->conn = NULL; fp->tcon = NULL; @@ -801,13 +801,13 @@ int ksmbd_reopen_durable_fd(struct ksmbd_work *work, struct ksmbd_file *fp) fp->tcon = work->tcon; ci = fp->f_ci; - write_lock(&ci->m_lock); + down_write(&ci->m_lock); list_for_each_entry_rcu(op, &ci->m_op_list, op_entry) { if (op->conn) continue; op->conn = fp->conn; } - write_unlock(&ci->m_lock); + up_write(&ci->m_lock); __open_id(&work->sess->file_table, fp, OPEN_ID_TYPE_VOLATILE_ID); if (!has_file_id(fp->volatile_id)) { diff --git a/fs/smb/server/vfs_cache.h b/fs/smb/server/vfs_cache.h index ed44fb4e18e7..5a225e7055f1 100644 --- a/fs/smb/server/vfs_cache.h +++ b/fs/smb/server/vfs_cache.h @@ -47,7 +47,7 @@ struct stream { }; struct ksmbd_inode { - rwlock_t m_lock; + struct rw_semaphore m_lock; atomic_t m_count; atomic_t op_count; /* opinfo count for streams */ -- cgit v1.2.3 From 691aae4f36f9825df6781da4399a1e718951085a Mon Sep 17 00:00:00 2001 From: Namjae Jeon Date: Wed, 1 May 2024 21:58:15 +0900 Subject: ksmbd: do not grant v2 lease if parent lease key and epoch are not set This patch fix xfstests generic/070 test with smb2 leases = yes. cifs.ko doesn't set parent lease key and epoch in create context v2 lease. ksmbd suppose that parent lease and epoch are vaild if data length is v2 lease context size and handle directory lease using this values. ksmbd should hanle it as v1 lease not v2 lease if parent lease key and epoch are not set in create context v2 lease. Cc: stable@vger.kernel.org Signed-off-by: Namjae Jeon Signed-off-by: Steve French --- fs/smb/server/oplock.c | 14 +++++++++----- 1 file changed, 9 insertions(+), 5 deletions(-) diff --git a/fs/smb/server/oplock.c b/fs/smb/server/oplock.c index c2abf109010d..b9d9116fc2b3 100644 --- a/fs/smb/server/oplock.c +++ b/fs/smb/server/oplock.c @@ -1201,7 +1201,9 @@ int smb_grant_oplock(struct ksmbd_work *work, int req_op_level, u64 pid, /* Only v2 leases handle the directory */ if (S_ISDIR(file_inode(fp->filp)->i_mode)) { - if (!lctx || lctx->version != 2) + if (!lctx || lctx->version != 2 || + (lctx->flags != SMB2_LEASE_FLAG_PARENT_LEASE_KEY_SET_LE && + !lctx->epoch)) return 0; } @@ -1466,8 +1468,9 @@ void create_lease_buf(u8 *rbuf, struct lease *lease) buf->lcontext.LeaseFlags = lease->flags; buf->lcontext.Epoch = cpu_to_le16(lease->epoch); buf->lcontext.LeaseState = lease->state; - memcpy(buf->lcontext.ParentLeaseKey, lease->parent_lease_key, - SMB2_LEASE_KEY_SIZE); + if (lease->flags == SMB2_LEASE_FLAG_PARENT_LEASE_KEY_SET_LE) + memcpy(buf->lcontext.ParentLeaseKey, lease->parent_lease_key, + SMB2_LEASE_KEY_SIZE); buf->ccontext.DataOffset = cpu_to_le16(offsetof (struct create_lease_v2, lcontext)); buf->ccontext.DataLength = cpu_to_le32(sizeof(struct lease_context_v2)); @@ -1526,8 +1529,9 @@ struct lease_ctx_info *parse_lease_state(void *open_req) lreq->flags = lc->lcontext.LeaseFlags; lreq->epoch = lc->lcontext.Epoch; lreq->duration = lc->lcontext.LeaseDuration; - memcpy(lreq->parent_lease_key, lc->lcontext.ParentLeaseKey, - SMB2_LEASE_KEY_SIZE); + if (lreq->flags == SMB2_LEASE_FLAG_PARENT_LEASE_KEY_SET_LE) + memcpy(lreq->parent_lease_key, lc->lcontext.ParentLeaseKey, + SMB2_LEASE_KEY_SIZE); lreq->version = 2; } else { struct create_lease *lc = (struct create_lease *)cc; -- cgit v1.2.3 From 4efaa5acf0a1d2b5947f98abb3acf8bfd966422b Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Fri, 3 May 2024 13:36:09 -0700 Subject: epoll: be better about file lifetimes epoll can call out to vfs_poll() with a file pointer that may race with the last 'fput()'. That would make f_count go down to zero, and while the ep->mtx locking means that the resulting file pointer tear-down will be blocked until the poll returns, it means that f_count is already dead, and any use of it won't actually get a reference to the file any more: it's dead regardless. Make sure we have a valid ref on the file pointer before we call down to vfs_poll() from the epoll routines. Link: https://lore.kernel.org/lkml/0000000000002d631f0615918f1e@google.com/ Reported-by: syzbot+045b454ab35fd82a35fb@syzkaller.appspotmail.com Reviewed-by: Jens Axboe Signed-off-by: Linus Torvalds --- fs/eventpoll.c | 38 +++++++++++++++++++++++++++++++++++++- 1 file changed, 37 insertions(+), 1 deletion(-) diff --git a/fs/eventpoll.c b/fs/eventpoll.c index 882b89edc52a..f53ca4f7fced 100644 --- a/fs/eventpoll.c +++ b/fs/eventpoll.c @@ -979,6 +979,34 @@ static __poll_t __ep_eventpoll_poll(struct file *file, poll_table *wait, int dep return res; } +/* + * The ffd.file pointer may be in the process of being torn down due to + * being closed, but we may not have finished eventpoll_release() yet. + * + * Normally, even with the atomic_long_inc_not_zero, the file may have + * been free'd and then gotten re-allocated to something else (since + * files are not RCU-delayed, they are SLAB_TYPESAFE_BY_RCU). + * + * But for epoll, users hold the ep->mtx mutex, and as such any file in + * the process of being free'd will block in eventpoll_release_file() + * and thus the underlying file allocation will not be free'd, and the + * file re-use cannot happen. + * + * For the same reason we can avoid a rcu_read_lock() around the + * operation - 'ffd.file' cannot go away even if the refcount has + * reached zero (but we must still not call out to ->poll() functions + * etc). + */ +static struct file *epi_fget(const struct epitem *epi) +{ + struct file *file; + + file = epi->ffd.file; + if (!atomic_long_inc_not_zero(&file->f_count)) + file = NULL; + return file; +} + /* * Differs from ep_eventpoll_poll() in that internal callers already have * the ep->mtx so we need to start from depth=1, such that mutex_lock_nested() @@ -987,14 +1015,22 @@ static __poll_t __ep_eventpoll_poll(struct file *file, poll_table *wait, int dep static __poll_t ep_item_poll(const struct epitem *epi, poll_table *pt, int depth) { - struct file *file = epi->ffd.file; + struct file *file = epi_fget(epi); __poll_t res; + /* + * We could return EPOLLERR | EPOLLHUP or something, but let's + * treat this more as "file doesn't exist, poll didn't happen". + */ + if (!file) + return 0; + pt->_key = epi->event.events; if (!is_file_epoll(file)) res = vfs_poll(file, pt); else res = __ep_eventpoll_poll(file, pt, depth); + fput(file); return res & epi->event.events; } -- cgit v1.2.3 From dd5a440a31fae6e459c0d6271dddd62825505361 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sun, 5 May 2024 14:06:01 -0700 Subject: Linux 6.9-rc7 --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index 40fb2ca6fe4c..d51d411d44a8 100644 --- a/Makefile +++ b/Makefile @@ -2,7 +2,7 @@ VERSION = 6 PATCHLEVEL = 9 SUBLEVEL = 0 -EXTRAVERSION = -rc6 +EXTRAVERSION = -rc7 NAME = Hurr durr I'ma ninja sloth # *DOCUMENTATION* -- cgit v1.2.3 From a26ff37e624d12e28077e5b24d2b264f62764ad6 Mon Sep 17 00:00:00 2001 From: Thadeu Lima de Souza Cascardo Date: Thu, 2 May 2024 10:20:06 -0300 Subject: net: fix out-of-bounds access in ops_init net_alloc_generic is called by net_alloc, which is called without any locking. It reads max_gen_ptrs, which is changed under pernet_ops_rwsem. It is read twice, first to allocate an array, then to set s.len, which is later used to limit the bounds of the array access. It is possible that the array is allocated and another thread is registering a new pernet ops, increments max_gen_ptrs, which is then used to set s.len with a larger than allocated length for the variable array. Fix it by reading max_gen_ptrs only once in net_alloc_generic. If max_gen_ptrs is later incremented, it will be caught in net_assign_generic. Signed-off-by: Thadeu Lima de Souza Cascardo Fixes: 073862ba5d24 ("netns: fix net_alloc_generic()") Reviewed-by: Eric Dumazet Reviewed-by: Kuniyuki Iwashima Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20240502132006.3430840-1-cascardo@igalia.com Signed-off-by: Paolo Abeni --- net/core/net_namespace.c | 13 ++++++++++--- 1 file changed, 10 insertions(+), 3 deletions(-) diff --git a/net/core/net_namespace.c b/net/core/net_namespace.c index f0540c557515..9d690d32da33 100644 --- a/net/core/net_namespace.c +++ b/net/core/net_namespace.c @@ -69,12 +69,15 @@ DEFINE_COOKIE(net_cookie); static struct net_generic *net_alloc_generic(void) { + unsigned int gen_ptrs = READ_ONCE(max_gen_ptrs); + unsigned int generic_size; struct net_generic *ng; - unsigned int generic_size = offsetof(struct net_generic, ptr[max_gen_ptrs]); + + generic_size = offsetof(struct net_generic, ptr[gen_ptrs]); ng = kzalloc(generic_size, GFP_KERNEL); if (ng) - ng->s.len = max_gen_ptrs; + ng->s.len = gen_ptrs; return ng; } @@ -1307,7 +1310,11 @@ static int register_pernet_operations(struct list_head *list, if (error < 0) return error; *ops->id = error; - max_gen_ptrs = max(max_gen_ptrs, *ops->id + 1); + /* This does not require READ_ONCE as writers already hold + * pernet_ops_rwsem. But WRITE_ONCE is needed to protect + * net_alloc_generic. + */ + WRITE_ONCE(max_gen_ptrs, max(max_gen_ptrs, *ops->id + 1)); } error = __register_pernet_operations(list, ops); if (error) { -- cgit v1.2.3 From 72e71bf0298c7ed985bcd0d3c7ff4ca19de60373 Mon Sep 17 00:00:00 2001 From: Kent Overstreet Date: Mon, 6 May 2024 10:14:13 -0400 Subject: bcachefs: Fix a scheduler splat in __bch2_next_write_buffer_flush_journal_buf() We're using mutex_lock() inside a wait_event() conditional - prepare_to_wait() has already flipped task state, so potentially blocking ops need annotation. Signed-off-by: Kent Overstreet --- fs/bcachefs/journal.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/fs/bcachefs/journal.c b/fs/bcachefs/journal.c index 9c9a25dbd613..9c2af544251a 100644 --- a/fs/bcachefs/journal.c +++ b/fs/bcachefs/journal.c @@ -870,6 +870,8 @@ static struct journal_buf *__bch2_next_write_buffer_flush_journal_buf(struct jou { struct journal_buf *ret = NULL; + /* We're inside wait_event(), but using mutex_lock(: */ + sched_annotate_sleep(); mutex_lock(&j->buf_lock); spin_lock(&j->lock); max_seq = min(max_seq, journal_cur_seq(j)); -- cgit v1.2.3 From 7ffec9ccdc6ad8356792f9a7823b1fe9c8a10cbf Mon Sep 17 00:00:00 2001 From: Kent Overstreet Date: Fri, 3 May 2024 10:55:17 -0400 Subject: bcachefs: don't free error pointers Reported-by: syzbot+3333603f569fc2ef258c@syzkaller.appspotmail.com Signed-off-by: Kent Overstreet --- fs/bcachefs/recovery.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/fs/bcachefs/recovery.c b/fs/bcachefs/recovery.c index be5b47619327..8091d0686029 100644 --- a/fs/bcachefs/recovery.c +++ b/fs/bcachefs/recovery.c @@ -902,7 +902,8 @@ out: bch2_journal_keys_put_initial(c); bch2_find_btree_nodes_exit(&c->found_btree_nodes); } - kfree(clean); + if (!IS_ERR(clean)) + kfree(clean); if (!ret && test_bit(BCH_FS_need_delete_dead_snapshots, &c->flags) && -- cgit v1.2.3 From a2ddaf965f6a15c316f483e7446fbe3d81fba27c Mon Sep 17 00:00:00 2001 From: Kent Overstreet Date: Fri, 3 May 2024 11:06:54 -0400 Subject: bcachefs: bucket_pos_to_bp_noerror() We don't want the assert when we're checking if the backpointer is valid. Reported-by: syzbot+bf7215c0525098e7747a@syzkaller.appspotmail.com Signed-off-by: Kent Overstreet --- fs/bcachefs/backpointers.c | 2 +- fs/bcachefs/backpointers.h | 14 ++++++++++---- 2 files changed, 11 insertions(+), 5 deletions(-) diff --git a/fs/bcachefs/backpointers.c b/fs/bcachefs/backpointers.c index a20044201002..af7a71de1bdf 100644 --- a/fs/bcachefs/backpointers.c +++ b/fs/bcachefs/backpointers.c @@ -54,7 +54,7 @@ int bch2_backpointer_invalid(struct bch_fs *c, struct bkey_s_c k, int ret = 0; bkey_fsck_err_on((bp.v->bucket_offset >> MAX_EXTENT_COMPRESS_RATIO_SHIFT) >= ca->mi.bucket_size || - !bpos_eq(bp.k->p, bucket_pos_to_bp(c, bucket, bp.v->bucket_offset)), + !bpos_eq(bp.k->p, bucket_pos_to_bp_noerror(ca, bucket, bp.v->bucket_offset)), c, err, backpointer_bucket_offset_wrong, "backpointer bucket_offset wrong"); diff --git a/fs/bcachefs/backpointers.h b/fs/bcachefs/backpointers.h index 85949b9fd880..c1b274eadda1 100644 --- a/fs/bcachefs/backpointers.h +++ b/fs/bcachefs/backpointers.h @@ -45,6 +45,15 @@ static inline struct bpos bp_pos_to_bucket(const struct bch_fs *c, return POS(bp_pos.inode, sector_to_bucket(ca, bucket_sector)); } +static inline struct bpos bucket_pos_to_bp_noerror(const struct bch_dev *ca, + struct bpos bucket, + u64 bucket_offset) +{ + return POS(bucket.inode, + (bucket_to_sector(ca, bucket.offset) << + MAX_EXTENT_COMPRESS_RATIO_SHIFT) + bucket_offset); +} + /* * Convert from pos in alloc btree + bucket offset to pos in backpointer btree: */ @@ -53,10 +62,7 @@ static inline struct bpos bucket_pos_to_bp(const struct bch_fs *c, u64 bucket_offset) { struct bch_dev *ca = bch_dev_bkey_exists(c, bucket.inode); - struct bpos ret = POS(bucket.inode, - (bucket_to_sector(ca, bucket.offset) << - MAX_EXTENT_COMPRESS_RATIO_SHIFT) + bucket_offset); - + struct bpos ret = bucket_pos_to_bp_noerror(ca, bucket, bucket_offset); EBUG_ON(!bkey_eq(bucket, bp_pos_to_bucket(c, ret))); return ret; } -- cgit v1.2.3 From b30b70ad8bffcde513d34d525820ec411f48e3d7 Mon Sep 17 00:00:00 2001 From: Kent Overstreet Date: Fri, 3 May 2024 11:39:53 -0400 Subject: bcachefs: Fix early error path in bch2_fs_btree_key_cache_exit() Reported-by: syzbot+a35cdb62ec34d44fb062@syzkaller.appspotmail.com Signed-off-by: Kent Overstreet --- fs/bcachefs/btree_key_cache.c | 16 +++++++++------- 1 file changed, 9 insertions(+), 7 deletions(-) diff --git a/fs/bcachefs/btree_key_cache.c b/fs/bcachefs/btree_key_cache.c index e8c1c530cd95..7dafa1accec2 100644 --- a/fs/bcachefs/btree_key_cache.c +++ b/fs/bcachefs/btree_key_cache.c @@ -956,13 +956,15 @@ void bch2_fs_btree_key_cache_exit(struct btree_key_cache *bc) } #ifdef __KERNEL__ - for_each_possible_cpu(cpu) { - struct btree_key_cache_freelist *f = - per_cpu_ptr(bc->pcpu_freed, cpu); - - for (i = 0; i < f->nr; i++) { - ck = f->objs[i]; - list_add(&ck->list, &items); + if (bc->pcpu_freed) { + for_each_possible_cpu(cpu) { + struct btree_key_cache_freelist *f = + per_cpu_ptr(bc->pcpu_freed, cpu); + + for (i = 0; i < f->nr; i++) { + ck = f->objs[i]; + list_add(&ck->list, &items); + } } } #endif -- cgit v1.2.3 From 4a8521b6bb81abba9d80d60b80908c77c9236ced Mon Sep 17 00:00:00 2001 From: Kent Overstreet Date: Fri, 3 May 2024 11:31:22 -0400 Subject: bcachefs: Inodes need extra padding for varint_decode_fast() Reported-by: syzbot+66b9b74f6520068596a9@syzkaller.appspotmail.com Signed-off-by: Kent Overstreet --- fs/bcachefs/io_write.c | 28 ++++++++++++++++++---------- 1 file changed, 18 insertions(+), 10 deletions(-) diff --git a/fs/bcachefs/io_write.c b/fs/bcachefs/io_write.c index f137252bccc5..b72cf31f7274 100644 --- a/fs/bcachefs/io_write.c +++ b/fs/bcachefs/io_write.c @@ -199,9 +199,6 @@ static inline int bch2_extent_update_i_size_sectors(struct btree_trans *trans, u64 new_i_size, s64 i_sectors_delta) { - struct btree_iter iter; - struct bkey_i *k; - struct bkey_i_inode_v3 *inode; /* * Crazy performance optimization: * Every extent update needs to also update the inode: the inode trigger @@ -214,25 +211,36 @@ static inline int bch2_extent_update_i_size_sectors(struct btree_trans *trans, * lost, but that's fine. */ unsigned inode_update_flags = BTREE_UPDATE_NOJOURNAL; - int ret; - k = bch2_bkey_get_mut_noupdate(trans, &iter, BTREE_ID_inodes, + struct btree_iter iter; + struct bkey_s_c k = bch2_bkey_get_iter(trans, &iter, BTREE_ID_inodes, SPOS(0, extent_iter->pos.inode, extent_iter->snapshot), BTREE_ITER_CACHED); - ret = PTR_ERR_OR_ZERO(k); + int ret = bkey_err(k); if (unlikely(ret)) return ret; - if (unlikely(k->k.type != KEY_TYPE_inode_v3)) { - k = bch2_inode_to_v3(trans, k); - ret = PTR_ERR_OR_ZERO(k); + /* + * varint_decode_fast(), in the inode .invalid method, reads up to 7 + * bytes past the end of the buffer: + */ + struct bkey_i *k_mut = bch2_trans_kmalloc_nomemzero(trans, bkey_bytes(k.k) + 8); + ret = PTR_ERR_OR_ZERO(k_mut); + if (unlikely(ret)) + goto err; + + bkey_reassemble(k_mut, k); + + if (unlikely(k_mut->k.type != KEY_TYPE_inode_v3)) { + k_mut = bch2_inode_to_v3(trans, k_mut); + ret = PTR_ERR_OR_ZERO(k_mut); if (unlikely(ret)) goto err; } - inode = bkey_i_to_inode_v3(k); + struct bkey_i_inode_v3 *inode = bkey_i_to_inode_v3(k_mut); if (!(le64_to_cpu(inode->v.bi_flags) & BCH_INODE_i_size_dirty) && new_i_size > le64_to_cpu(inode->v.bi_size)) { -- cgit v1.2.3 From feb077c1774e559cddfc41ef26c864780d158fe2 Mon Sep 17 00:00:00 2001 From: Kent Overstreet Date: Fri, 3 May 2024 17:13:21 -0400 Subject: bcachefs: Fix refcount put in sb_field_resize error path Signed-off-by: Kent Overstreet --- fs/bcachefs/super-io.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/bcachefs/super-io.c b/fs/bcachefs/super-io.c index 08ea3dbbbe97..e7527d551e3c 100644 --- a/fs/bcachefs/super-io.c +++ b/fs/bcachefs/super-io.c @@ -232,7 +232,7 @@ struct bch_sb_field *bch2_sb_field_resize_id(struct bch_sb_handle *sb, struct bch_sb_handle *dev_sb = &ca->disk_sb; if (bch2_sb_realloc(dev_sb, le32_to_cpu(dev_sb->sb->u64s) + d)) { - percpu_ref_put(&ca->ref); + percpu_ref_put(&ca->io_ref); return NULL; } } -- cgit v1.2.3 From 1267df40acb2da62b1641abae26132411d093fb3 Mon Sep 17 00:00:00 2001 From: Kent Overstreet Date: Sat, 4 May 2024 12:29:46 -0400 Subject: bcachefs: Initialize bch_write_op->failed in inline data path Normally this is initialized in __bch2_write(), which is executed in a loop, but the inline data path skips this. Reported-by: syzbot+fd3ccb331eb21f05d13b@syzkaller.appspotmail.com Signed-off-by: Kent Overstreet --- fs/bcachefs/io_write.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/fs/bcachefs/io_write.c b/fs/bcachefs/io_write.c index b72cf31f7274..40d7df7607df 100644 --- a/fs/bcachefs/io_write.c +++ b/fs/bcachefs/io_write.c @@ -1513,6 +1513,8 @@ static void bch2_write_data_inline(struct bch_write_op *op, unsigned data_len) unsigned sectors; int ret; + memset(&op->failed, 0, sizeof(op->failed)); + op->flags |= BCH_WRITE_WROTE_DATA_INLINE; op->flags |= BCH_WRITE_DONE; -- cgit v1.2.3 From 3a2d0259274202432e5119463dd4cf5f9fabed98 Mon Sep 17 00:00:00 2001 From: Kent Overstreet Date: Sat, 4 May 2024 12:51:49 -0400 Subject: bcachefs: Fix bch2_dev_lookup() refcounting bch2_dev_lookup() is supposed to take a ref on the device it returns, but for_each_member_device() takes refs as it iterates, for_each_member_device_rcu() does not. Signed-off-by: Kent Overstreet --- fs/bcachefs/super.c | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-) diff --git a/fs/bcachefs/super.c b/fs/bcachefs/super.c index 88e214c609bb..c2c80e6890ae 100644 --- a/fs/bcachefs/super.c +++ b/fs/bcachefs/super.c @@ -2004,13 +2004,9 @@ err: /* return with ref on ca->ref: */ struct bch_dev *bch2_dev_lookup(struct bch_fs *c, const char *name) { - rcu_read_lock(); - for_each_member_device_rcu(c, ca, NULL) - if (!strcmp(name, ca->name)) { - rcu_read_unlock(); + for_each_member_device(c, ca) + if (!strcmp(name, ca->name)) return ca; - } - rcu_read_unlock(); return ERR_PTR(-BCH_ERR_ENOENT_dev_not_found); } -- cgit v1.2.3 From 18b4abcead744322feb90ba31450e7d770e928bd Mon Sep 17 00:00:00 2001 From: Kent Overstreet Date: Sat, 4 May 2024 12:55:44 -0400 Subject: bcachefs: Fix lifetime issue in device iterator helpers bch2_get_next_dev() and bch2_get_next_online_dev() iterate over devices, dropping and taking refs as they go; we can't access the previous device (for ca->dev_idx) after we've dropped our ref to it, unless we take rcu_read_lock() first. Signed-off-by: Kent Overstreet --- fs/bcachefs/sb-members.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/bcachefs/sb-members.h b/fs/bcachefs/sb-members.h index 5efa64eca5f8..5bf27d30ca29 100644 --- a/fs/bcachefs/sb-members.h +++ b/fs/bcachefs/sb-members.h @@ -107,10 +107,10 @@ static inline struct bch_dev *__bch2_next_dev(struct bch_fs *c, struct bch_dev * static inline struct bch_dev *bch2_get_next_dev(struct bch_fs *c, struct bch_dev *ca) { + rcu_read_lock(); if (ca) percpu_ref_put(&ca->ref); - rcu_read_lock(); if ((ca = __bch2_next_dev(c, ca, NULL))) percpu_ref_get(&ca->ref); rcu_read_unlock(); @@ -132,10 +132,10 @@ static inline struct bch_dev *bch2_get_next_online_dev(struct bch_fs *c, struct bch_dev *ca, unsigned state_mask) { + rcu_read_lock(); if (ca) percpu_ref_put(&ca->io_ref); - rcu_read_lock(); while ((ca = __bch2_next_dev(c, ca, NULL)) && (!((1 << ca->mi.state) & state_mask) || !percpu_ref_tryget(&ca->io_ref))) -- cgit v1.2.3 From db42549d402cb44fe67c95d08f1a9ea902d32e7e Mon Sep 17 00:00:00 2001 From: Kent Overstreet Date: Sat, 4 May 2024 13:26:37 -0400 Subject: bcachefs: Add a better limit for maximum number of buckets The bucket_gens array is a single array allocation (one byte per bucket), and kernel allocations are still limited to INT_MAX. Check this limit to avoid failing the bucket_gens array allocation. Reported-by: syzbot+b29f436493184ea42e2b@syzkaller.appspotmail.com Signed-off-by: Kent Overstreet --- fs/bcachefs/bcachefs_format.h | 6 ++++++ fs/bcachefs/errcode.h | 1 + fs/bcachefs/sb-members.c | 6 +++--- fs/bcachefs/super.c | 7 +++++++ 4 files changed, 17 insertions(+), 3 deletions(-) diff --git a/fs/bcachefs/bcachefs_format.h b/fs/bcachefs/bcachefs_format.h index f7fbfccd2b1e..8345a2b2d05b 100644 --- a/fs/bcachefs/bcachefs_format.h +++ b/fs/bcachefs/bcachefs_format.h @@ -591,6 +591,12 @@ struct bch_member { __le64 btree_allocated_bitmap; }; +/* + * This limit comes from the bucket_gens array - it's a single allocation, and + * kernel allocation are limited to INT_MAX + */ +#define BCH_MEMBER_NBUCKETS_MAX (INT_MAX - 64) + #define BCH_MEMBER_V1_BYTES 56 LE64_BITMASK(BCH_MEMBER_STATE, struct bch_member, flags, 0, 4) diff --git a/fs/bcachefs/errcode.h b/fs/bcachefs/errcode.h index 01a79fa3eacb..dbe35b80bc0b 100644 --- a/fs/bcachefs/errcode.h +++ b/fs/bcachefs/errcode.h @@ -175,6 +175,7 @@ x(EINVAL, block_size_too_small) \ x(EINVAL, bucket_size_too_small) \ x(EINVAL, device_size_too_small) \ + x(EINVAL, device_size_too_big) \ x(EINVAL, device_not_a_member_of_filesystem) \ x(EINVAL, device_has_been_removed) \ x(EINVAL, device_splitbrain) \ diff --git a/fs/bcachefs/sb-members.c b/fs/bcachefs/sb-members.c index 5b8e621ac5eb..44b3f0cb7b49 100644 --- a/fs/bcachefs/sb-members.c +++ b/fs/bcachefs/sb-members.c @@ -124,9 +124,9 @@ static int validate_member(struct printbuf *err, struct bch_sb *sb, int i) { - if (le64_to_cpu(m.nbuckets) > LONG_MAX) { - prt_printf(err, "device %u: too many buckets (got %llu, max %lu)", - i, le64_to_cpu(m.nbuckets), LONG_MAX); + if (le64_to_cpu(m.nbuckets) > BCH_MEMBER_NBUCKETS_MAX) { + prt_printf(err, "device %u: too many buckets (got %llu, max %u)", + i, le64_to_cpu(m.nbuckets), BCH_MEMBER_NBUCKETS_MAX); return -BCH_ERR_invalid_sb_members; } diff --git a/fs/bcachefs/super.c b/fs/bcachefs/super.c index c2c80e6890ae..dddf57ec4511 100644 --- a/fs/bcachefs/super.c +++ b/fs/bcachefs/super.c @@ -1959,6 +1959,13 @@ int bch2_dev_resize(struct bch_fs *c, struct bch_dev *ca, u64 nbuckets) goto err; } + if (nbuckets > BCH_MEMBER_NBUCKETS_MAX) { + bch_err(ca, "New device size too big (%llu greater than max %u)", + nbuckets, BCH_MEMBER_NBUCKETS_MAX); + ret = -BCH_ERR_device_size_too_big; + goto err; + } + if (bch2_dev_is_online(ca) && get_capacity(ca->disk_sb.bdev->bd_disk) < ca->mi.bucket_size * nbuckets) { -- cgit v1.2.3 From 9a0ec045110dbaad4b8d609142b534f913354101 Mon Sep 17 00:00:00 2001 From: Reed Riley Date: Sat, 4 May 2024 22:12:23 +0000 Subject: bcachefs: fix overflow in fiemap filefrag (and potentially other utilities that call fiemap) sometimes pass ULONG_MAX as the length. fiemap_prep clamps excessively large lengths - but the calculation of end can overflow if it occurs before calling fiemap_prep. When this happens, filefrag assumes it has read to the end and exits. Signed-off-by: Reed Riley Signed-off-by: Kent Overstreet --- fs/bcachefs/fs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/bcachefs/fs.c b/fs/bcachefs/fs.c index fce690007edf..6f114803c6f2 100644 --- a/fs/bcachefs/fs.c +++ b/fs/bcachefs/fs.c @@ -964,7 +964,6 @@ static int bch2_fiemap(struct inode *vinode, struct fiemap_extent_info *info, struct btree_iter iter; struct bkey_s_c k; struct bkey_buf cur, prev; - struct bpos end = POS(ei->v.i_ino, (start + len) >> 9); unsigned offset_into_extent, sectors; bool have_extent = false; u32 snapshot; @@ -974,6 +973,7 @@ static int bch2_fiemap(struct inode *vinode, struct fiemap_extent_info *info, if (ret) return ret; + struct bpos end = POS(ei->v.i_ino, (start + len) >> 9); if (start + len < start) return -EINVAL; -- cgit v1.2.3 From 6b8cbfc3db7582d6f26c6b757d8e949174641709 Mon Sep 17 00:00:00 2001 From: Kent Overstreet Date: Sun, 5 May 2024 22:02:28 -0400 Subject: bcachefs: Fix assert in bch2_alloc_v4_invalid() Reported-by: syzbot+10827fa6b176e1acf1d0@syzkaller.appspotmail.com Signed-off-by: Kent Overstreet --- fs/bcachefs/alloc_background.c | 4 ++-- fs/bcachefs/alloc_background.h | 8 ++++++-- 2 files changed, 8 insertions(+), 4 deletions(-) diff --git a/fs/bcachefs/alloc_background.c b/fs/bcachefs/alloc_background.c index 4ff56fa4d539..534ba2b02bd6 100644 --- a/fs/bcachefs/alloc_background.c +++ b/fs/bcachefs/alloc_background.c @@ -244,10 +244,10 @@ int bch2_alloc_v4_invalid(struct bch_fs *c, struct bkey_s_c k, struct bkey_s_c_alloc_v4 a = bkey_s_c_to_alloc_v4(k); int ret = 0; - bkey_fsck_err_on(alloc_v4_u64s(a.v) > bkey_val_u64s(k.k), c, err, + bkey_fsck_err_on(alloc_v4_u64s_noerror(a.v) > bkey_val_u64s(k.k), c, err, alloc_v4_val_size_bad, "bad val size (%u > %zu)", - alloc_v4_u64s(a.v), bkey_val_u64s(k.k)); + alloc_v4_u64s_noerror(a.v), bkey_val_u64s(k.k)); bkey_fsck_err_on(!BCH_ALLOC_V4_BACKPOINTERS_START(a.v) && BCH_ALLOC_V4_NR_BACKPOINTERS(a.v), c, err, diff --git a/fs/bcachefs/alloc_background.h b/fs/bcachefs/alloc_background.h index 052b2fac25d6..2790e516383d 100644 --- a/fs/bcachefs/alloc_background.h +++ b/fs/bcachefs/alloc_background.h @@ -126,13 +126,17 @@ static inline struct bpos alloc_freespace_pos(struct bpos pos, struct bch_alloc_ return pos; } -static inline unsigned alloc_v4_u64s(const struct bch_alloc_v4 *a) +static inline unsigned alloc_v4_u64s_noerror(const struct bch_alloc_v4 *a) { - unsigned ret = (BCH_ALLOC_V4_BACKPOINTERS_START(a) ?: + return (BCH_ALLOC_V4_BACKPOINTERS_START(a) ?: BCH_ALLOC_V4_U64s_V0) + BCH_ALLOC_V4_NR_BACKPOINTERS(a) * (sizeof(struct bch_backpointer) / sizeof(u64)); +} +static inline unsigned alloc_v4_u64s(const struct bch_alloc_v4 *a) +{ + unsigned ret = alloc_v4_u64s_noerror(a); BUG_ON(ret > U8_MAX - BKEY_U64s); return ret; } -- cgit v1.2.3 From f39055220f6f98a180e3503fe05bbf9921c425c8 Mon Sep 17 00:00:00 2001 From: Kent Overstreet Date: Sun, 5 May 2024 22:28:00 -0400 Subject: bcachefs: Add missing validation for superblock section clean We were forgetting to check for jset entries that overrun the end of the section - both in validate and to_text(); to_text() needs to be safe for types that fail to validate. Reported-by: syzbot+c48865e11e7e893ec4ab@syzkaller.appspotmail.com Signed-off-by: Kent Overstreet --- fs/bcachefs/sb-clean.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/fs/bcachefs/sb-clean.c b/fs/bcachefs/sb-clean.c index 35ca3f138de6..194e55b11137 100644 --- a/fs/bcachefs/sb-clean.c +++ b/fs/bcachefs/sb-clean.c @@ -278,6 +278,17 @@ static int bch2_sb_clean_validate(struct bch_sb *sb, return -BCH_ERR_invalid_sb_clean; } + for (struct jset_entry *entry = clean->start; + entry != vstruct_end(&clean->field); + entry = vstruct_next(entry)) { + if ((void *) vstruct_next(entry) > vstruct_end(&clean->field)) { + prt_str(err, "entry type "); + bch2_prt_jset_entry_type(err, le16_to_cpu(entry->type)); + prt_str(err, " overruns end of section"); + return -BCH_ERR_invalid_sb_clean; + } + } + return 0; } @@ -295,6 +306,9 @@ static void bch2_sb_clean_to_text(struct printbuf *out, struct bch_sb *sb, for (entry = clean->start; entry != vstruct_end(&clean->field); entry = vstruct_next(entry)) { + if ((void *) vstruct_next(entry) > vstruct_end(&clean->field)) + break; + if (entry->type == BCH_JSET_ENTRY_btree_keys && !entry->u64s) continue; -- cgit v1.2.3 From 2bb9600d5d4735953c47dd1ee99382c68dd04caa Mon Sep 17 00:00:00 2001 From: Kent Overstreet Date: Sun, 5 May 2024 22:33:05 -0400 Subject: bcachefs: Guard against unknown k.k->type in __bkey_invalid() For forwards compatibility we have to allow unknown key types, and only run the checks that make sense against them. Fix a missing guard on k.k->type being known. Reported-by: syzbot+ae4dc916da3ce51f284f@syzkaller.appspotmail.com Signed-off-by: Kent Overstreet --- fs/bcachefs/bkey_methods.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/bcachefs/bkey_methods.c b/fs/bcachefs/bkey_methods.c index db336a43fc08..a275a9e8e341 100644 --- a/fs/bcachefs/bkey_methods.c +++ b/fs/bcachefs/bkey_methods.c @@ -171,8 +171,8 @@ int __bch2_bkey_invalid(struct bch_fs *c, struct bkey_s_c k, if (type >= BKEY_TYPE_NR) return 0; - bkey_fsck_err_on((type == BKEY_TYPE_btree || - (flags & BKEY_INVALID_COMMIT)) && + bkey_fsck_err_on(k.k->type < KEY_TYPE_MAX && + (type == BKEY_TYPE_btree || (flags & BKEY_INVALID_COMMIT)) && !(bch2_key_types_allowed[type] & BIT_ULL(k.k->type)), c, err, bkey_invalid_type_for_btree, "invalid key type for btree %s (%s)", -- cgit v1.2.3 From 0ec5b3b7ccfcdca02ab322abf86455d0050ae98f Mon Sep 17 00:00:00 2001 From: Kent Overstreet Date: Sun, 5 May 2024 22:44:27 -0400 Subject: bcachefs: Fix shift-by-64 in bformat_needs_redo() Ancient versions of bcachefs produced packed formats that could represent keys that our in memory format cannot represent; bformat_needs_redo() has some tricky shifts to check for this sort of overflow. Reported-by: syzbot+594427aebfefeebe91c6@syzkaller.appspotmail.com Signed-off-by: Kent Overstreet --- fs/bcachefs/move.c | 22 ++++++++++++++-------- 1 file changed, 14 insertions(+), 8 deletions(-) diff --git a/fs/bcachefs/move.c b/fs/bcachefs/move.c index bf68ea49447b..4d94b7742dbb 100644 --- a/fs/bcachefs/move.c +++ b/fs/bcachefs/move.c @@ -968,24 +968,30 @@ static bool migrate_btree_pred(struct bch_fs *c, void *arg, return migrate_pred(c, arg, bkey_i_to_s_c(&b->key), io_opts, data_opts); } +/* + * Ancient versions of bcachefs produced packed formats which could represent + * keys that the in memory format cannot represent; this checks for those + * formats so we can get rid of them. + */ static bool bformat_needs_redo(struct bkey_format *f) { - unsigned i; - - for (i = 0; i < f->nr_fields; i++) { + for (unsigned i = 0; i < f->nr_fields; i++) { + unsigned f_bits = f->bits_per_field[i]; unsigned unpacked_bits = bch2_bkey_format_current.bits_per_field[i]; u64 unpacked_mask = ~((~0ULL << 1) << (unpacked_bits - 1)); u64 field_offset = le64_to_cpu(f->field_offset[i]); - if (f->bits_per_field[i] > unpacked_bits) + if (f_bits > unpacked_bits) return true; - if ((f->bits_per_field[i] == unpacked_bits) && field_offset) + if ((f_bits == unpacked_bits) && field_offset) return true; - if (((field_offset + ((1ULL << f->bits_per_field[i]) - 1)) & - unpacked_mask) < - field_offset) + u64 f_mask = f_bits + ? ~((~0ULL << (f_bits - 1)) << 1) + : 0; + + if (((field_offset + f_mask) & unpacked_mask) < field_offset) return true; } -- cgit v1.2.3 From 8060bf1d83f7d404bacb0e5a38f2d4d8f4c9dfb7 Mon Sep 17 00:00:00 2001 From: Kent Overstreet Date: Sun, 5 May 2024 22:56:54 -0400 Subject: bcachefs: Fix snapshot_t() usage in bch2_fs_quota_read_inode() bch2_fs_quota_read_inode() wasn't entirely updated to the bch2_snapshot_tree() helper, which takes rcu lock. Reported-by: syzbot+a3a9a61224ed3b7f0010@syzkaller.appspotmail.com Signed-off-by: Kent Overstreet --- fs/bcachefs/quota.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) diff --git a/fs/bcachefs/quota.c b/fs/bcachefs/quota.c index e68b34eab90a..556da0738106 100644 --- a/fs/bcachefs/quota.c +++ b/fs/bcachefs/quota.c @@ -560,13 +560,11 @@ static int bch2_fs_quota_read_inode(struct btree_trans *trans, struct bch_fs *c = trans->c; struct bch_inode_unpacked u; struct bch_snapshot_tree s_t; - int ret; + u32 tree = bch2_snapshot_tree(c, k.k->p.snapshot); - ret = bch2_snapshot_tree_lookup(trans, - bch2_snapshot_tree(c, k.k->p.snapshot), &s_t); + int ret = bch2_snapshot_tree_lookup(trans, tree, &s_t); bch2_fs_inconsistent_on(bch2_err_matches(ret, ENOENT), c, - "%s: snapshot tree %u not found", __func__, - snapshot_t(c, k.k->p.snapshot)->tree); + "%s: snapshot tree %u not found", __func__, tree); if (ret) return ret; -- cgit v1.2.3 From 88ab10186c44d0a8b90842beab8648b5fd14432d Mon Sep 17 00:00:00 2001 From: Kent Overstreet Date: Mon, 6 May 2024 08:40:46 -0400 Subject: bcachefs: Add missing skcipher_request_set_callback() call Signed-off-by: Kent Overstreet --- fs/bcachefs/checksum.c | 1 + 1 file changed, 1 insertion(+) diff --git a/fs/bcachefs/checksum.c b/fs/bcachefs/checksum.c index 7ed779b411f6..088fd2e7bdf1 100644 --- a/fs/bcachefs/checksum.c +++ b/fs/bcachefs/checksum.c @@ -102,6 +102,7 @@ static inline int do_encrypt_sg(struct crypto_sync_skcipher *tfm, int ret; skcipher_request_set_sync_tfm(req, tfm); + skcipher_request_set_callback(req, 0, NULL, NULL); skcipher_request_set_crypt(req, sg, sg, len, nonce.d); ret = crypto_skcipher_encrypt(req); -- cgit v1.2.3 From 71dac2482ad3c8d4a8b8998a96751f009bad895f Mon Sep 17 00:00:00 2001 From: Kent Overstreet Date: Mon, 6 May 2024 09:10:29 -0400 Subject: bcachefs: BCH_SB_LAYOUT_SIZE_BITS_MAX Define a constant for the max superblock size, to avoid a too-large shift. Reported-by: syzbot+a8b0fb419355c91dda7f@syzkaller.appspotmail.com Signed-off-by: Kent Overstreet --- fs/bcachefs/bcachefs_format.h | 2 ++ fs/bcachefs/super-io.c | 2 +- 2 files changed, 3 insertions(+), 1 deletion(-) diff --git a/fs/bcachefs/bcachefs_format.h b/fs/bcachefs/bcachefs_format.h index 8345a2b2d05b..2e8b1a489c20 100644 --- a/fs/bcachefs/bcachefs_format.h +++ b/fs/bcachefs/bcachefs_format.h @@ -903,6 +903,8 @@ unsigned bcachefs_metadata_required_upgrade_below = bcachefs_metadata_version_re #define BCH_SB_SECTOR 8 #define BCH_SB_MEMBERS_MAX 64 /* XXX kill */ +#define BCH_SB_LAYOUT_SIZE_BITS_MAX 16 /* 32 MB */ + struct bch_sb_layout { __uuid_t magic; /* bcachefs superblock UUID */ __u8 layout_type; diff --git a/fs/bcachefs/super-io.c b/fs/bcachefs/super-io.c index e7527d551e3c..989d16bba8f0 100644 --- a/fs/bcachefs/super-io.c +++ b/fs/bcachefs/super-io.c @@ -649,7 +649,7 @@ reread: bytes = vstruct_bytes(sb->sb); - if (bytes > 512 << sb->sb->layout.sb_max_size_bits) { + if (bytes > 512ULL << min(BCH_SB_LAYOUT_SIZE_BITS_MAX, sb->sb->layout.sb_max_size_bits)) { prt_printf(err, "Invalid superblock: too big (got %zu bytes, layout max %lu)", bytes, 512UL << sb->sb->layout.sb_max_size_bits); return -BCH_ERR_invalid_sb_too_big; -- cgit v1.2.3 From f3d049b35b01fff656d720606fcbab0b819f26d1 Mon Sep 17 00:00:00 2001 From: Kai-Heng Feng Date: Mon, 6 May 2024 13:16:02 +0800 Subject: PCI/ASPM: Restore parent state to parent, child state to child MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit There's a typo that makes parent device uses child LNKCTL value and vice versa. This causes Micron NVMe to trigger a reboot upon system resume. Correct the typo to fix the issue. Fixes: 64dbb2d70744 ("PCI/ASPM: Disable L1 before configuring L1 Substates") Link: https://lore.kernel.org/r/20240506051602.1990743-1-kai.heng.feng@canonical.com Signed-off-by: Kai-Heng Feng [bhelgaas: update subject] Signed-off-by: Bjorn Helgaas Reviewed-by: Ilpo Järvinen --- drivers/pci/pcie/aspm.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/pci/pcie/aspm.c b/drivers/pci/pcie/aspm.c index 2428d278e015..47761c7ef267 100644 --- a/drivers/pci/pcie/aspm.c +++ b/drivers/pci/pcie/aspm.c @@ -177,8 +177,8 @@ void pci_restore_aspm_l1ss_state(struct pci_dev *pdev) /* Restore L0s/L1 if they were enabled */ if (FIELD_GET(PCI_EXP_LNKCTL_ASPMC, clnkctl) || FIELD_GET(PCI_EXP_LNKCTL_ASPMC, plnkctl)) { - pcie_capability_write_word(parent, PCI_EXP_LNKCTL, clnkctl); - pcie_capability_write_word(pdev, PCI_EXP_LNKCTL, plnkctl); + pcie_capability_write_word(parent, PCI_EXP_LNKCTL, plnkctl); + pcie_capability_write_word(pdev, PCI_EXP_LNKCTL, clnkctl); } } -- cgit v1.2.3 From 3628e0383dd349f02f882e612ab6184e4bb3dc10 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Mon, 6 May 2024 13:28:59 -0700 Subject: Reapply "drm/qxl: simplify qxl_fence_wait" This reverts commit 07ed11afb68d94eadd4ffc082b97c2331307c5ea. Stephen Rostedt reports: "I went to run my tests on my VMs and the tests hung on boot up. Unfortunately, the most I ever got out was: [ 93.607888] Testing event system initcall: OK [ 93.667730] Running tests on all trace events: [ 93.669757] Testing all events: OK [ 95.631064] ------------[ cut here ]------------ Timed out after 60 seconds" and further debugging points to a possible circular locking dependency between the console_owner locking and the worker pool locking. Reverting the commit allows Steve's VM to boot to completion again. [ This may obviously result in the "[TTM] Buffer eviction failed" messages again, which was the reason for that original revert. But at this point this seems preferable to a non-booting system... ] Reported-and-bisected-by: Steven Rostedt Link: https://lore.kernel.org/all/20240502081641.457aa25f@gandalf.local.home/ Acked-by: Maxime Ripard Cc: Alex Constantino Cc: Maxime Ripard Cc: Timo Lindfors Cc: Dave Airlie Cc: Gerd Hoffmann Cc: Maarten Lankhorst Cc: Thomas Zimmermann Cc: Daniel Vetter Signed-off-by: Linus Torvalds --- drivers/gpu/drm/qxl/qxl_release.c | 50 ++++----------------------------------- include/linux/dma-fence.h | 7 ------ 2 files changed, 5 insertions(+), 52 deletions(-) diff --git a/drivers/gpu/drm/qxl/qxl_release.c b/drivers/gpu/drm/qxl/qxl_release.c index 9febc8b73f09..368d26da0d6a 100644 --- a/drivers/gpu/drm/qxl/qxl_release.c +++ b/drivers/gpu/drm/qxl/qxl_release.c @@ -58,56 +58,16 @@ static long qxl_fence_wait(struct dma_fence *fence, bool intr, signed long timeout) { struct qxl_device *qdev; - struct qxl_release *release; - int count = 0, sc = 0; - bool have_drawable_releases; unsigned long cur, end = jiffies + timeout; qdev = container_of(fence->lock, struct qxl_device, release_lock); - release = container_of(fence, struct qxl_release, base); - have_drawable_releases = release->type == QXL_RELEASE_DRAWABLE; - -retry: - sc++; - - if (dma_fence_is_signaled(fence)) - goto signaled; - - qxl_io_notify_oom(qdev); - - for (count = 0; count < 11; count++) { - if (!qxl_queue_garbage_collect(qdev, true)) - break; - - if (dma_fence_is_signaled(fence)) - goto signaled; - } - - if (dma_fence_is_signaled(fence)) - goto signaled; - if (have_drawable_releases || sc < 4) { - if (sc > 2) - /* back off */ - usleep_range(500, 1000); - - if (time_after(jiffies, end)) - return 0; - - if (have_drawable_releases && sc > 300) { - DMA_FENCE_WARN(fence, - "failed to wait on release %llu after spincount %d\n", - fence->context & ~0xf0000000, sc); - goto signaled; - } - goto retry; - } - /* - * yeah, original sync_obj_wait gave up after 3 spins when - * have_drawable_releases is not set. - */ + if (!wait_event_timeout(qdev->release_event, + (dma_fence_is_signaled(fence) || + (qxl_io_notify_oom(qdev), 0)), + timeout)) + return 0; -signaled: cur = jiffies; if (time_after(cur, end)) return 0; diff --git a/include/linux/dma-fence.h b/include/linux/dma-fence.h index c3f9bb6602ba..e06bad467f55 100644 --- a/include/linux/dma-fence.h +++ b/include/linux/dma-fence.h @@ -682,11 +682,4 @@ static inline bool dma_fence_is_container(struct dma_fence *fence) return dma_fence_is_array(fence) || dma_fence_is_chain(fence); } -#define DMA_FENCE_WARN(f, fmt, args...) \ - do { \ - struct dma_fence *__ff = (f); \ - pr_warn("f %llu#%llu: " fmt, __ff->context, __ff->seqno,\ - ##args); \ - } while (0) - #endif /* __LINUX_DMA_FENCE_H */ -- cgit v1.2.3 From d8cac8568618dcb8a51af3db1103e8d4cc4aeea7 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Thu, 2 May 2024 16:17:00 +0000 Subject: phonet: fix rtm_phonet_notify() skb allocation MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit fill_route() stores three components in the skb: - struct rtmsg - RTA_DST (u8) - RTA_OIF (u32) Therefore, rtm_phonet_notify() should use NLMSG_ALIGN(sizeof(struct rtmsg)) + nla_total_size(1) + nla_total_size(4) Fixes: f062f41d0657 ("Phonet: routing table Netlink interface") Signed-off-by: Eric Dumazet Acked-by: Rémi Denis-Courmont Link: https://lore.kernel.org/r/20240502161700.1804476-1-edumazet@google.com Signed-off-by: Jakub Kicinski --- net/phonet/pn_netlink.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/phonet/pn_netlink.c b/net/phonet/pn_netlink.c index 59aebe296890..dd4c7e9a634f 100644 --- a/net/phonet/pn_netlink.c +++ b/net/phonet/pn_netlink.c @@ -193,7 +193,7 @@ void rtm_phonet_notify(int event, struct net_device *dev, u8 dst) struct sk_buff *skb; int err = -ENOBUFS; - skb = nlmsg_new(NLMSG_ALIGN(sizeof(struct ifaddrmsg)) + + skb = nlmsg_new(NLMSG_ALIGN(sizeof(struct rtmsg)) + nla_total_size(1) + nla_total_size(4), GFP_KERNEL); if (skb == NULL) goto errout; -- cgit v1.2.3 From 9adcac6506185dd1a727f1784b89f30cd217ef7e Mon Sep 17 00:00:00 2001 From: Donald Hunter Date: Fri, 3 May 2024 17:43:04 +0100 Subject: netlink: specs: Add missing bridge linkinfo attrs Attributes for FDB learned entries were added to the if_link netlink api for bridge linkinfo but are missing from the rt_link.yaml spec. Add the missing attributes to the spec. Fixes: ddd1ad68826d ("net: bridge: Add netlink knobs for number / max learned FDB entries") Signed-off-by: Donald Hunter Acked-by: Nikolay Aleksandrov Reviewed-by: Jacob Keller Link: https://lore.kernel.org/r/20240503164304.87427-1-donald.hunter@gmail.com Signed-off-by: Jakub Kicinski --- Documentation/netlink/specs/rt_link.yaml | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/Documentation/netlink/specs/rt_link.yaml b/Documentation/netlink/specs/rt_link.yaml index 8e4d19adee8c..4e702ac8bf66 100644 --- a/Documentation/netlink/specs/rt_link.yaml +++ b/Documentation/netlink/specs/rt_link.yaml @@ -1144,6 +1144,12 @@ attribute-sets: - name: mcast-querier-state type: binary + - + name: fdb-n-learned + type: u32 + - + name: fdb-max-learned + type: u32 - name: linkinfo-brport-attrs name-prefix: ifla-brport- -- cgit v1.2.3 From 54541c1f78e12a78487ae63e2e199a7d4f6dbd26 Mon Sep 17 00:00:00 2001 From: Kent Overstreet Date: Mon, 6 May 2024 20:49:24 -0400 Subject: bcachefs: Fix race in bch2_write_super() bch2_write_super() was looping over online devices multiple times - dropping and retaking io_ref each time. This meant it could race with device removal; it could increment the sequence number on a device but fail to write it - and then if the device was re-added, it would get confused the next time around thinking a superblock write was silently dropped. Fix this by taking io_ref once, and stashing pointers to online devices in a darray. Signed-off-by: Kent Overstreet --- fs/bcachefs/super-io.c | 47 ++++++++++++++++++++++++++++++++--------------- 1 file changed, 32 insertions(+), 15 deletions(-) diff --git a/fs/bcachefs/super-io.c b/fs/bcachefs/super-io.c index 989d16bba8f0..bfdb15e7d778 100644 --- a/fs/bcachefs/super-io.c +++ b/fs/bcachefs/super-io.c @@ -923,6 +923,7 @@ int bch2_write_super(struct bch_fs *c) struct bch_devs_mask sb_written; bool wrote, can_mount_without_written, can_mount_with_written; unsigned degraded_flags = BCH_FORCE_IF_DEGRADED; + DARRAY(struct bch_dev *) online_devices = {}; int ret = 0; trace_and_count(c, write_super, c, _RET_IP_); @@ -935,6 +936,15 @@ int bch2_write_super(struct bch_fs *c) closure_init_stack(cl); memset(&sb_written, 0, sizeof(sb_written)); + for_each_online_member(c, ca) { + ret = darray_push(&online_devices, ca); + if (bch2_fs_fatal_err_on(ret, c, "%s: error allocating online devices", __func__)) { + percpu_ref_put(&ca->io_ref); + goto out; + } + percpu_ref_get(&ca->io_ref); + } + /* Make sure we're using the new magic numbers: */ c->disk_sb.sb->magic = BCHFS_MAGIC; c->disk_sb.sb->layout.magic = BCHFS_MAGIC; @@ -942,8 +952,8 @@ int bch2_write_super(struct bch_fs *c) le64_add_cpu(&c->disk_sb.sb->seq, 1); struct bch_sb_field_members_v2 *mi = bch2_sb_field_get(c->disk_sb.sb, members_v2); - for_each_online_member(c, ca) - __bch2_members_v2_get_mut(mi, ca->dev_idx)->seq = c->disk_sb.sb->seq; + darray_for_each(online_devices, ca) + __bch2_members_v2_get_mut(mi, (*ca)->dev_idx)->seq = c->disk_sb.sb->seq; c->disk_sb.sb->write_time = cpu_to_le64(ktime_get_real_seconds()); if (test_bit(BCH_FS_error, &c->flags)) @@ -959,16 +969,15 @@ int bch2_write_super(struct bch_fs *c) bch2_sb_errors_from_cpu(c); bch2_sb_downgrade_update(c); - for_each_online_member(c, ca) - bch2_sb_from_fs(c, ca); + darray_for_each(online_devices, ca) + bch2_sb_from_fs(c, (*ca)); - for_each_online_member(c, ca) { + darray_for_each(online_devices, ca) { printbuf_reset(&err); - ret = bch2_sb_validate(&ca->disk_sb, &err, WRITE); + ret = bch2_sb_validate(&(*ca)->disk_sb, &err, WRITE); if (ret) { bch2_fs_inconsistent(c, "sb invalid before write: %s", err.buf); - percpu_ref_put(&ca->io_ref); goto out; } } @@ -995,16 +1004,18 @@ int bch2_write_super(struct bch_fs *c) return -BCH_ERR_sb_not_downgraded; } - for_each_online_member(c, ca) { - __set_bit(ca->dev_idx, sb_written.d); - ca->sb_write_error = 0; + darray_for_each(online_devices, ca) { + __set_bit((*ca)->dev_idx, sb_written.d); + (*ca)->sb_write_error = 0; } - for_each_online_member(c, ca) - read_back_super(c, ca); + darray_for_each(online_devices, ca) + read_back_super(c, *ca); closure_sync(cl); - for_each_online_member(c, ca) { + darray_for_each(online_devices, cap) { + struct bch_dev *ca = *cap; + if (ca->sb_write_error) continue; @@ -1031,17 +1042,20 @@ int bch2_write_super(struct bch_fs *c) do { wrote = false; - for_each_online_member(c, ca) + darray_for_each(online_devices, cap) { + struct bch_dev *ca = *cap; if (!ca->sb_write_error && sb < ca->disk_sb.sb->layout.nr_superblocks) { write_one_super(c, ca, sb); wrote = true; } + } closure_sync(cl); sb++; } while (wrote); - for_each_online_member(c, ca) { + darray_for_each(online_devices, cap) { + struct bch_dev *ca = *cap; if (ca->sb_write_error) __clear_bit(ca->dev_idx, sb_written.d); else @@ -1077,6 +1091,9 @@ int bch2_write_super(struct bch_fs *c) out: /* Make new options visible after they're persistent: */ bch2_sb_update(c); + darray_for_each(online_devices, ca) + percpu_ref_put(&(*ca)->io_ref); + darray_exit(&online_devices); printbuf_exit(&err); return ret; } -- cgit v1.2.3 From 6e297a73bccf852e7716207caa8eb868737c7155 Mon Sep 17 00:00:00 2001 From: Kent Overstreet Date: Mon, 6 May 2024 23:11:43 -0400 Subject: bcachefs: Add missing sched_annotate_sleep() in bch2_journal_flush_seq_async() Signed-off-by: Kent Overstreet --- fs/bcachefs/journal.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/fs/bcachefs/journal.c b/fs/bcachefs/journal.c index 9c2af544251a..a8b08e76d0d0 100644 --- a/fs/bcachefs/journal.c +++ b/fs/bcachefs/journal.c @@ -706,6 +706,12 @@ recheck_need_open: spin_unlock(&j->lock); + /* + * We're called from bch2_journal_flush_seq() -> wait_event(); + * but this might block. We won't usually block, so we won't + * livelock: + */ + sched_annotate_sleep(); ret = bch2_journal_res_get(j, &res, jset_u64s(0), 0); if (ret) return ret; -- cgit v1.2.3 From 19e35f24750ddf860c51e51c68cf07ea181b4881 Mon Sep 17 00:00:00 2001 From: Tetsuo Handa Date: Sun, 5 May 2024 19:36:49 +0900 Subject: nfc: nci: Fix kcov check in nci_rx_work() Commit 7e8cdc97148c ("nfc: Add KCOV annotations") added kcov_remote_start_common()/kcov_remote_stop() pair into nci_rx_work(), with an assumption that kcov_remote_stop() is called upon continue of the for loop. But commit d24b03535e5e ("nfc: nci: Fix uninit-value in nci_dev_up and nci_ntf_packet") forgot to call kcov_remote_stop() before break of the for loop. Reported-by: syzbot Closes: https://syzkaller.appspot.com/bug?extid=0438378d6f157baae1a2 Fixes: d24b03535e5e ("nfc: nci: Fix uninit-value in nci_dev_up and nci_ntf_packet") Suggested-by: Andrey Konovalov Signed-off-by: Tetsuo Handa Reviewed-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/6d10f829-5a0c-405a-b39a-d7266f3a1a0b@I-love.SAKURA.ne.jp Signed-off-by: Jakub Kicinski --- net/nfc/nci/core.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/nfc/nci/core.c b/net/nfc/nci/core.c index 0d26c8ec9993..b133dc55304c 100644 --- a/net/nfc/nci/core.c +++ b/net/nfc/nci/core.c @@ -1518,6 +1518,7 @@ static void nci_rx_work(struct work_struct *work) if (!nci_plen(skb->data)) { kfree_skb(skb); + kcov_remote_stop(); break; } -- cgit v1.2.3 From 6963c508fd7ab66ae0b7ae3db9a62ca6267f1ae8 Mon Sep 17 00:00:00 2001 From: Gregory Detal Date: Mon, 6 May 2024 17:35:28 +0200 Subject: mptcp: only allow set existing scheduler for net.mptcp.scheduler The current behavior is to accept any strings as inputs, this results in an inconsistent result where an unexisting scheduler can be set: # sysctl -w net.mptcp.scheduler=notdefault net.mptcp.scheduler = notdefault This patch changes this behavior by checking for existing scheduler before accepting the input. Fixes: e3b2870b6d22 ("mptcp: add a new sysctl scheduler") Cc: stable@vger.kernel.org Signed-off-by: Gregory Detal Reviewed-by: Matthieu Baerts (NGI0) Tested-by: Geliang Tang Reviewed-by: Mat Martineau Signed-off-by: Matthieu Baerts (NGI0) Link: https://lore.kernel.org/r/20240506-upstream-net-20240506-mptcp-sched-exist-v1-1-2ed1529e521e@kernel.org Signed-off-by: Jakub Kicinski --- net/mptcp/ctrl.c | 39 ++++++++++++++++++++++++++++++++++++++- 1 file changed, 38 insertions(+), 1 deletion(-) diff --git a/net/mptcp/ctrl.c b/net/mptcp/ctrl.c index 13fe0748dde8..2963ba84e2ee 100644 --- a/net/mptcp/ctrl.c +++ b/net/mptcp/ctrl.c @@ -96,6 +96,43 @@ static void mptcp_pernet_set_defaults(struct mptcp_pernet *pernet) } #ifdef CONFIG_SYSCTL +static int mptcp_set_scheduler(const struct net *net, const char *name) +{ + struct mptcp_pernet *pernet = mptcp_get_pernet(net); + struct mptcp_sched_ops *sched; + int ret = 0; + + rcu_read_lock(); + sched = mptcp_sched_find(name); + if (sched) + strscpy(pernet->scheduler, name, MPTCP_SCHED_NAME_MAX); + else + ret = -ENOENT; + rcu_read_unlock(); + + return ret; +} + +static int proc_scheduler(struct ctl_table *ctl, int write, + void *buffer, size_t *lenp, loff_t *ppos) +{ + const struct net *net = current->nsproxy->net_ns; + char val[MPTCP_SCHED_NAME_MAX]; + struct ctl_table tbl = { + .data = val, + .maxlen = MPTCP_SCHED_NAME_MAX, + }; + int ret; + + strscpy(val, mptcp_get_scheduler(net), MPTCP_SCHED_NAME_MAX); + + ret = proc_dostring(&tbl, write, buffer, lenp, ppos); + if (write && ret == 0) + ret = mptcp_set_scheduler(net, val); + + return ret; +} + static struct ctl_table mptcp_sysctl_table[] = { { .procname = "enabled", @@ -148,7 +185,7 @@ static struct ctl_table mptcp_sysctl_table[] = { .procname = "scheduler", .maxlen = MPTCP_SCHED_NAME_MAX, .mode = 0644, - .proc_handler = proc_dostring, + .proc_handler = proc_scheduler, }, { .procname = "close_timeout", -- cgit v1.2.3 From 96d88f65adfbcaca153afd7d3e20d74ba379c599 Mon Sep 17 00:00:00 2001 From: Brian Foster Date: Thu, 25 Apr 2024 06:44:00 -0400 Subject: virtiofs: include a newline in sysfs tag The internal tag string doesn't contain a newline. Append one when emitting the tag via sysfs. [Stefan] Orthogonal to the newline issue, sysfs_emit(buf, "%s", fs->tag) is needed to prevent format string injection. Signed-off-by: Brian Foster Fixes: a8f62f50b4e4 ("virtiofs: export filesystem tags through sysfs") Signed-off-by: Miklos Szeredi --- fs/fuse/virtio_fs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/fuse/virtio_fs.c b/fs/fuse/virtio_fs.c index 322af827a232..bb3e941b9503 100644 --- a/fs/fuse/virtio_fs.c +++ b/fs/fuse/virtio_fs.c @@ -170,7 +170,7 @@ static ssize_t tag_show(struct kobject *kobj, { struct virtio_fs *fs = container_of(kobj, struct virtio_fs, kobj); - return sysfs_emit(buf, fs->tag); + return sysfs_emit(buf, "%s\n", fs->tag); } static struct kobj_attribute virtio_fs_tag_attr = __ATTR_RO(tag); -- cgit v1.2.3 From 86b29d830ad69eecff25b22dc96c14c6573718e6 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Sun, 5 May 2024 20:42:38 +0200 Subject: net: bridge: fix corrupted ethernet header on multicast-to-unicast The change from skb_copy to pskb_copy unfortunately changed the data copying to omit the ethernet header, since it was pulled before reaching this point. Fix this by calling __skb_push/pull around pskb_copy. Fixes: 59c878cbcdd8 ("net: bridge: fix multicast-to-unicast with fraglist GSO") Signed-off-by: Felix Fietkau Acked-by: Nikolay Aleksandrov Signed-off-by: David S. Miller --- net/bridge/br_forward.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/net/bridge/br_forward.c b/net/bridge/br_forward.c index d7c35f55bd69..d97064d460dc 100644 --- a/net/bridge/br_forward.c +++ b/net/bridge/br_forward.c @@ -258,6 +258,7 @@ static void maybe_deliver_addr(struct net_bridge_port *p, struct sk_buff *skb, { struct net_device *dev = BR_INPUT_SKB_CB(skb)->brdev; const unsigned char *src = eth_hdr(skb)->h_source; + struct sk_buff *nskb; if (!should_deliver(p, skb)) return; @@ -266,12 +267,16 @@ static void maybe_deliver_addr(struct net_bridge_port *p, struct sk_buff *skb, if (skb->dev == p->dev && ether_addr_equal(src, addr)) return; - skb = pskb_copy(skb, GFP_ATOMIC); - if (!skb) { + __skb_push(skb, ETH_HLEN); + nskb = pskb_copy(skb, GFP_ATOMIC); + __skb_pull(skb, ETH_HLEN); + if (!nskb) { DEV_STATS_INC(dev, tx_dropped); return; } + skb = nskb; + __skb_pull(skb, ETH_HLEN); if (!is_broadcast_ether_addr(addr)) memcpy(eth_hdr(skb)->h_dest, addr, ETH_ALEN); -- cgit v1.2.3 From 2e82a58d6c0797092eabe7ba66a532c11548047f Mon Sep 17 00:00:00 2001 From: Vincent Duvert Date: Sun, 5 May 2024 11:54:57 -0700 Subject: appletalk: Improve handling of broadcast packets When a broadcast AppleTalk packet is received, prefer queuing it on the socket whose address matches the address of the interface that received the packet (and is listening on the correct port). Userspace applications that handle such packets will usually send a response on the same socket that received the packet; this fix allows the response to be sent on the correct interface. If a socket matching the interface's address is not found, an arbitrary socket listening on the correct port will be used, if any. This matches the implementation's previous behavior. Fixes atalkd's responses to network information requests when multiple network interfaces are configured to use AppleTalk. Link: https://lore.kernel.org/netdev/20200722113752.1218-2-vincent.ldev@duvert.net/ Link: https://gist.github.com/VinDuv/4db433b6dce39d51a5b7847ee749b2a4 Signed-off-by: Vincent Duvert Signed-off-by: Doug Brown Signed-off-by: David S. Miller --- net/appletalk/ddp.c | 19 ++++++++++++++++--- 1 file changed, 16 insertions(+), 3 deletions(-) diff --git a/net/appletalk/ddp.c b/net/appletalk/ddp.c index 198f5ba2feae..b068651984fe 100644 --- a/net/appletalk/ddp.c +++ b/net/appletalk/ddp.c @@ -88,6 +88,7 @@ static inline void atalk_remove_socket(struct sock *sk) static struct sock *atalk_search_socket(struct sockaddr_at *to, struct atalk_iface *atif) { + struct sock *def_socket = NULL; struct sock *s; read_lock_bh(&atalk_sockets_lock); @@ -98,8 +99,20 @@ static struct sock *atalk_search_socket(struct sockaddr_at *to, continue; if (to->sat_addr.s_net == ATADDR_ANYNET && - to->sat_addr.s_node == ATADDR_BCAST) - goto found; + to->sat_addr.s_node == ATADDR_BCAST) { + if (atif->address.s_node == at->src_node && + atif->address.s_net == at->src_net) { + /* This socket's address matches the address of the interface + * that received the packet -- use it + */ + goto found; + } + + /* Continue searching for a socket matching the interface address, + * but use this socket by default if no other one is found + */ + def_socket = s; + } if (to->sat_addr.s_net == at->src_net && (to->sat_addr.s_node == at->src_node || @@ -116,7 +129,7 @@ static struct sock *atalk_search_socket(struct sockaddr_at *to, goto found; } } - s = NULL; + s = def_socket; found: read_unlock_bh(&atalk_sockets_lock); return s; -- cgit v1.2.3 From ab0cde321adc96a755caf39eb0e90d61511ec6c4 Mon Sep 17 00:00:00 2001 From: Gregor Herburger Date: Mon, 6 May 2024 08:24:33 +0200 Subject: net: phy: marvell-88q2xxx: add support for Rev B1 and B2 Different revisions of the Marvell 88q2xxx phy needs different init sequences. Add init sequence for Rev B1 and Rev B2. Rev B2 init sequence skips one register write. Tested-by: Dimitri Fedrau Signed-off-by: Gregor Herburger Signed-off-by: David S. Miller --- drivers/net/phy/marvell-88q2xxx.c | 119 +++++++++++++++++++++++++++++++++----- 1 file changed, 103 insertions(+), 16 deletions(-) diff --git a/drivers/net/phy/marvell-88q2xxx.c b/drivers/net/phy/marvell-88q2xxx.c index 6b4bd9883304..c812f16eaa3a 100644 --- a/drivers/net/phy/marvell-88q2xxx.c +++ b/drivers/net/phy/marvell-88q2xxx.c @@ -12,6 +12,8 @@ #include #define PHY_ID_88Q2220_REVB0 (MARVELL_PHY_ID_88Q2220 | 0x1) +#define PHY_ID_88Q2220_REVB1 (MARVELL_PHY_ID_88Q2220 | 0x2) +#define PHY_ID_88Q2220_REVB2 (MARVELL_PHY_ID_88Q2220 | 0x3) #define MDIO_MMD_AN_MV_STAT 32769 #define MDIO_MMD_AN_MV_STAT_ANEG 0x0100 @@ -129,6 +131,49 @@ static const struct mmd_val mv88q222x_revb0_init_seq1[] = { { MDIO_MMD_PCS, 0xfe05, 0x755c }, }; +static const struct mmd_val mv88q222x_revb1_init_seq0[] = { + { MDIO_MMD_PCS, 0xffe4, 0x0007 }, + { MDIO_MMD_AN, MDIO_AN_T1_CTRL, 0x0 }, + { MDIO_MMD_PCS, 0xffe3, 0x7000 }, + { MDIO_MMD_PMAPMD, MDIO_CTRL1, 0x0840 }, +}; + +static const struct mmd_val mv88q222x_revb2_init_seq0[] = { + { MDIO_MMD_PCS, 0xffe4, 0x0007 }, + { MDIO_MMD_AN, MDIO_AN_T1_CTRL, 0x0 }, + { MDIO_MMD_PMAPMD, MDIO_CTRL1, 0x0840 }, +}; + +static const struct mmd_val mv88q222x_revb1_revb2_init_seq1[] = { + { MDIO_MMD_PCS, 0xfe07, 0x125a }, + { MDIO_MMD_PCS, 0xfe09, 0x1288 }, + { MDIO_MMD_PCS, 0xfe08, 0x2588 }, + { MDIO_MMD_PCS, 0xfe72, 0x042c }, + { MDIO_MMD_PCS, 0xffe4, 0x0071 }, + { MDIO_MMD_PCS, 0xffe4, 0x0001 }, + { MDIO_MMD_PCS, 0xfe1b, 0x0048 }, + { MDIO_MMD_PMAPMD, 0x0000, 0x0000 }, + { MDIO_MMD_PCS, 0x0000, 0x0000 }, + { MDIO_MMD_PCS, 0xffdb, 0xfc10 }, + { MDIO_MMD_PCS, 0xfe1b, 0x58 }, + { MDIO_MMD_PCS, 0xfcad, 0x030c }, + { MDIO_MMD_PCS, 0x8032, 0x6001 }, + { MDIO_MMD_PCS, 0xfdff, 0x05a5 }, + { MDIO_MMD_PCS, 0xfdec, 0xdbaf }, + { MDIO_MMD_PCS, 0xfcab, 0x1054 }, + { MDIO_MMD_PCS, 0xfcac, 0x1483 }, + { MDIO_MMD_PCS, 0x8033, 0xc801 }, + { MDIO_MMD_AN, 0x8032, 0x2020 }, + { MDIO_MMD_AN, 0x8031, 0xa28 }, + { MDIO_MMD_AN, 0x8031, 0xc28 }, + { MDIO_MMD_PCS, 0xfbba, 0x0cb2 }, + { MDIO_MMD_PCS, 0xfbbb, 0x0c4a }, + { MDIO_MMD_PCS, 0xfe5f, 0xe8 }, + { MDIO_MMD_PCS, 0xfe05, 0x755c }, + { MDIO_MMD_PCS, 0xfa20, 0x002a }, + { MDIO_MMD_PCS, 0xfe11, 0x1105 }, +}; + static int mv88q2xxx_soft_reset(struct phy_device *phydev) { int ret; @@ -687,31 +732,72 @@ static int mv88q222x_soft_reset(struct phy_device *phydev) return 0; } -static int mv88q222x_revb0_config_init(struct phy_device *phydev) +static int mv88q222x_write_mmd_vals(struct phy_device *phydev, + const struct mmd_val *vals, size_t len) { - int ret, i; + int ret; - for (i = 0; i < ARRAY_SIZE(mv88q222x_revb0_init_seq0); i++) { - ret = phy_write_mmd(phydev, mv88q222x_revb0_init_seq0[i].devad, - mv88q222x_revb0_init_seq0[i].regnum, - mv88q222x_revb0_init_seq0[i].val); + for (; len; vals++, len--) { + ret = phy_write_mmd(phydev, vals->devad, vals->regnum, + vals->val); if (ret < 0) return ret; } + return 0; +} + +static int mv88q222x_revb0_config_init(struct phy_device *phydev) +{ + int ret; + + ret = mv88q222x_write_mmd_vals(phydev, mv88q222x_revb0_init_seq0, + ARRAY_SIZE(mv88q222x_revb0_init_seq0)); + if (ret < 0) + return ret; + usleep_range(5000, 10000); - for (i = 0; i < ARRAY_SIZE(mv88q222x_revb0_init_seq1); i++) { - ret = phy_write_mmd(phydev, mv88q222x_revb0_init_seq1[i].devad, - mv88q222x_revb0_init_seq1[i].regnum, - mv88q222x_revb0_init_seq1[i].val); - if (ret < 0) - return ret; - } + ret = mv88q222x_write_mmd_vals(phydev, mv88q222x_revb0_init_seq1, + ARRAY_SIZE(mv88q222x_revb0_init_seq1)); + if (ret < 0) + return ret; + + return mv88q2xxx_config_init(phydev); +} + +static int mv88q222x_revb1_revb2_config_init(struct phy_device *phydev) +{ + bool is_rev_b1 = phydev->c45_ids.device_ids[MDIO_MMD_PMAPMD] == PHY_ID_88Q2220_REVB1; + int ret; + + if (is_rev_b1) + ret = mv88q222x_write_mmd_vals(phydev, mv88q222x_revb1_init_seq0, + ARRAY_SIZE(mv88q222x_revb1_init_seq0)); + else + ret = mv88q222x_write_mmd_vals(phydev, mv88q222x_revb2_init_seq0, + ARRAY_SIZE(mv88q222x_revb2_init_seq0)); + if (ret < 0) + return ret; + + usleep_range(3000, 5000); + + ret = mv88q222x_write_mmd_vals(phydev, mv88q222x_revb1_revb2_init_seq1, + ARRAY_SIZE(mv88q222x_revb1_revb2_init_seq1)); + if (ret < 0) + return ret; return mv88q2xxx_config_init(phydev); } +static int mv88q222x_config_init(struct phy_device *phydev) +{ + if (phydev->c45_ids.device_ids[MDIO_MMD_PMAPMD] == PHY_ID_88Q2220_REVB0) + return mv88q222x_revb0_config_init(phydev); + else + return mv88q222x_revb1_revb2_config_init(phydev); +} + static int mv88q222x_cable_test_start(struct phy_device *phydev) { int ret; @@ -810,14 +896,15 @@ static struct phy_driver mv88q2xxx_driver[] = { .get_sqi_max = mv88q2xxx_get_sqi_max, }, { - PHY_ID_MATCH_EXACT(PHY_ID_88Q2220_REVB0), + .phy_id = MARVELL_PHY_ID_88Q2220, + .phy_id_mask = MARVELL_PHY_ID_MASK, .name = "mv88q2220", .flags = PHY_POLL_CABLE_TEST, .probe = mv88q2xxx_probe, .get_features = mv88q2xxx_get_features, .config_aneg = mv88q2xxx_config_aneg, .aneg_done = genphy_c45_aneg_done, - .config_init = mv88q222x_revb0_config_init, + .config_init = mv88q222x_config_init, .read_status = mv88q2xxx_read_status, .soft_reset = mv88q222x_soft_reset, .config_intr = mv88q2xxx_config_intr, @@ -836,7 +923,7 @@ module_phy_driver(mv88q2xxx_driver); static struct mdio_device_id __maybe_unused mv88q2xxx_tbl[] = { { MARVELL_PHY_ID_88Q2110, MARVELL_PHY_ID_MASK }, - { PHY_ID_MATCH_EXACT(PHY_ID_88Q2220_REVB0), }, + { MARVELL_PHY_ID_88Q2220, MARVELL_PHY_ID_MASK }, { /*sentinel*/ } }; MODULE_DEVICE_TABLE(mdio, mv88q2xxx_tbl); -- cgit v1.2.3 From 4e13d3a9c25b7080f8a619f961e943fe08c2672c Mon Sep 17 00:00:00 2001 From: Shigeru Yoshida Date: Mon, 6 May 2024 23:11:29 +0900 Subject: ipv6: Fix potential uninit-value access in __ip6_make_skb() As it was done in commit fc1092f51567 ("ipv4: Fix uninit-value access in __ip_make_skb()") for IPv4, check FLOWI_FLAG_KNOWN_NH on fl6->flowi6_flags instead of testing HDRINCL on the socket to avoid a race condition which causes uninit-value access. Fixes: ea30388baebc ("ipv6: Fix an uninit variable access bug in __ip6_make_skb()") Signed-off-by: Shigeru Yoshida Signed-off-by: David S. Miller --- net/ipv6/ip6_output.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/ipv6/ip6_output.c b/net/ipv6/ip6_output.c index b9dd3a66e423..fa2937732665 100644 --- a/net/ipv6/ip6_output.c +++ b/net/ipv6/ip6_output.c @@ -1933,7 +1933,7 @@ struct sk_buff *__ip6_make_skb(struct sock *sk, u8 icmp6_type; if (sk->sk_socket->type == SOCK_RAW && - !inet_test_bit(HDRINCL, sk)) + !(fl6->flowi6_flags & FLOWI_FLAG_KNOWN_NH)) icmp6_type = fl6->fl6_icmp_type; else icmp6_type = icmp6_hdr(skb)->icmp6_type; -- cgit v1.2.3 From 9a169c267e946b0f47f67e8ccc70134708ccf3d4 Mon Sep 17 00:00:00 2001 From: Ido Schimmel Date: Tue, 7 May 2024 14:30:33 +0300 Subject: selftests: test_bridge_neigh_suppress.sh: Fix failures due to duplicate MAC When creating the topology for the test, three veth pairs are created in the initial network namespace before being moved to one of the network namespaces created by the test. On systems where systemd-udev uses MACAddressPolicy=persistent (default since systemd version 242), this will result in some net devices having the same MAC address since they were created with the same name in the initial network namespace. In turn, this leads to arping / ndisc6 failing since packets are dropped by the bridge's loopback filter. Fix by creating each net device in the correct network namespace instead of moving it there from the initial network namespace. Reported-by: Jakub Kicinski Closes: https://lore.kernel.org/netdev/20240426074015.251854d4@kernel.org/ Fixes: 7648ac72dcd7 ("selftests: net: Add bridge neighbor suppression test") Signed-off-by: Ido Schimmel Link: https://lore.kernel.org/r/20240507113033.1732534-1-idosch@nvidia.com Signed-off-by: Jakub Kicinski --- tools/testing/selftests/net/test_bridge_neigh_suppress.sh | 14 +++----------- 1 file changed, 3 insertions(+), 11 deletions(-) diff --git a/tools/testing/selftests/net/test_bridge_neigh_suppress.sh b/tools/testing/selftests/net/test_bridge_neigh_suppress.sh index 8533393a4f18..02b986c9c247 100755 --- a/tools/testing/selftests/net/test_bridge_neigh_suppress.sh +++ b/tools/testing/selftests/net/test_bridge_neigh_suppress.sh @@ -154,17 +154,9 @@ setup_topo() setup_topo_ns $ns done - ip link add name veth0 type veth peer name veth1 - ip link set dev veth0 netns $h1 name eth0 - ip link set dev veth1 netns $sw1 name swp1 - - ip link add name veth0 type veth peer name veth1 - ip link set dev veth0 netns $sw1 name veth0 - ip link set dev veth1 netns $sw2 name veth0 - - ip link add name veth0 type veth peer name veth1 - ip link set dev veth0 netns $h2 name eth0 - ip link set dev veth1 netns $sw2 name swp1 + ip -n $h1 link add name eth0 type veth peer name swp1 netns $sw1 + ip -n $sw1 link add name veth0 type veth peer name veth0 netns $sw2 + ip -n $h2 link add name eth0 type veth peer name swp1 netns $sw2 } setup_host_common() -- cgit v1.2.3 From ba4e103848d3a2a28a0445e39f4a9564187efe54 Mon Sep 17 00:00:00 2001 From: David Howells Date: Fri, 3 May 2024 16:07:39 +0100 Subject: rxrpc: Fix congestion control algorithm Make the following fixes to the congestion control algorithm: (1) Don't vary the cwnd starting value by the size of RXRPC_TX_SMSS since that's currently held constant - set to the size of a jumbo subpacket payload so that we can create jumbo packets on the fly. The current code invariably picks 3 as the starting value. Further, the starting cwnd needs to be an even number because we ack every other packet, so set it to 4. (2) Don't cut ssthresh when we see an ACK come from the peer with a receive window (rwind) less than ssthresh. ssthresh keeps track of characteristics of the connection whereas rwind may be reduced by the peer for any reason - and may be reduced to 0. Fixes: 1fc4fa2ac93d ("rxrpc: Fix congestion management") Fixes: 0851115090a3 ("rxrpc: Reduce ssthresh to peer's receive window") Signed-off-by: David Howells Suggested-by: Simon Wilkinson cc: Marc Dionne cc: linux-afs@lists.infradead.org Reviewed-by: Jeffrey Altman > Link: https://lore.kernel.org/r/20240503150749.1001323-2-dhowells@redhat.com Signed-off-by: Jakub Kicinski --- net/rxrpc/ar-internal.h | 2 +- net/rxrpc/call_object.c | 7 +------ net/rxrpc/input.c | 3 --- 3 files changed, 2 insertions(+), 10 deletions(-) diff --git a/net/rxrpc/ar-internal.h b/net/rxrpc/ar-internal.h index 08c0a32db8c7..08de24658f4f 100644 --- a/net/rxrpc/ar-internal.h +++ b/net/rxrpc/ar-internal.h @@ -697,7 +697,7 @@ struct rxrpc_call { * packets) rather than bytes. */ #define RXRPC_TX_SMSS RXRPC_JUMBO_DATALEN -#define RXRPC_MIN_CWND (RXRPC_TX_SMSS > 2190 ? 2 : RXRPC_TX_SMSS > 1095 ? 3 : 4) +#define RXRPC_MIN_CWND 4 u8 cong_cwnd; /* Congestion window size */ u8 cong_extra; /* Extra to send for congestion management */ u8 cong_ssthresh; /* Slow-start threshold */ diff --git a/net/rxrpc/call_object.c b/net/rxrpc/call_object.c index 01fa71e8b1f7..f9e983a12c14 100644 --- a/net/rxrpc/call_object.c +++ b/net/rxrpc/call_object.c @@ -174,12 +174,7 @@ struct rxrpc_call *rxrpc_alloc_call(struct rxrpc_sock *rx, gfp_t gfp, call->rx_winsize = rxrpc_rx_window_size; call->tx_winsize = 16; - if (RXRPC_TX_SMSS > 2190) - call->cong_cwnd = 2; - else if (RXRPC_TX_SMSS > 1095) - call->cong_cwnd = 3; - else - call->cong_cwnd = 4; + call->cong_cwnd = RXRPC_MIN_CWND; call->cong_ssthresh = RXRPC_TX_MAX_WINDOW; call->rxnet = rxnet; diff --git a/net/rxrpc/input.c b/net/rxrpc/input.c index 3dedb8c0618c..860075f1290b 100644 --- a/net/rxrpc/input.c +++ b/net/rxrpc/input.c @@ -685,9 +685,6 @@ static void rxrpc_input_ack_trailer(struct rxrpc_call *call, struct sk_buff *skb call->tx_winsize = rwind; } - if (call->cong_ssthresh > rwind) - call->cong_ssthresh = rwind; - mtu = min(ntohl(trailer->maxMTU), ntohl(trailer->ifMTU)); peer = call->peer; -- cgit v1.2.3 From 012b7206918dcc5a4dcf1432b3e643114c95957e Mon Sep 17 00:00:00 2001 From: David Howells Date: Fri, 3 May 2024 16:07:40 +0100 Subject: rxrpc: Only transmit one ACK per jumbo packet received Only generate one ACK packet for all the subpackets in a jumbo packet. If we would like to generate more than one ACK, we prioritise them base on their reason code, in the order, highest first: OutOfSeq > NoSpace > ExceedsWin > Duplicate > Requested > Delay > Idle For the first four, we reference the lowest offending subpacket; for the last three, the highest. This reduces the number of ACKs we end up transmitting to one per UDP packet transmitted to reduce network loading and packet parsing. Fixes: 5d7edbc9231e ("rxrpc: Get rid of the Rx ring") Signed-off-by: David Howells cc: Marc Dionne cc: linux-afs@lists.infradead.org Reviewed-by: Jeffrey Altman > Link: https://lore.kernel.org/r/20240503150749.1001323-3-dhowells@redhat.com Signed-off-by: Jakub Kicinski --- net/rxrpc/input.c | 46 +++++++++++++++++++++++++++++++++++----------- 1 file changed, 35 insertions(+), 11 deletions(-) diff --git a/net/rxrpc/input.c b/net/rxrpc/input.c index 860075f1290b..16d49a861dbb 100644 --- a/net/rxrpc/input.c +++ b/net/rxrpc/input.c @@ -9,6 +9,17 @@ #include "ar-internal.h" +/* Override priority when generating ACKs for received DATA */ +static const u8 rxrpc_ack_priority[RXRPC_ACK__INVALID] = { + [RXRPC_ACK_IDLE] = 1, + [RXRPC_ACK_DELAY] = 2, + [RXRPC_ACK_REQUESTED] = 3, + [RXRPC_ACK_DUPLICATE] = 4, + [RXRPC_ACK_EXCEEDS_WINDOW] = 5, + [RXRPC_ACK_NOSPACE] = 6, + [RXRPC_ACK_OUT_OF_SEQUENCE] = 7, +}; + static void rxrpc_proto_abort(struct rxrpc_call *call, rxrpc_seq_t seq, enum rxrpc_abort_reason why) { @@ -365,7 +376,7 @@ static void rxrpc_input_queue_data(struct rxrpc_call *call, struct sk_buff *skb, * Process a DATA packet. */ static void rxrpc_input_data_one(struct rxrpc_call *call, struct sk_buff *skb, - bool *_notify) + bool *_notify, rxrpc_serial_t *_ack_serial, int *_ack_reason) { struct rxrpc_skb_priv *sp = rxrpc_skb(skb); struct sk_buff *oos; @@ -418,8 +429,6 @@ static void rxrpc_input_data_one(struct rxrpc_call *call, struct sk_buff *skb, /* Send an immediate ACK if we fill in a hole */ else if (!skb_queue_empty(&call->rx_oos_queue)) ack_reason = RXRPC_ACK_DELAY; - else - call->ackr_nr_unacked++; window++; if (after(window, wtop)) { @@ -497,12 +506,16 @@ static void rxrpc_input_data_one(struct rxrpc_call *call, struct sk_buff *skb, } send_ack: - if (ack_reason >= 0) - rxrpc_send_ACK(call, ack_reason, serial, - rxrpc_propose_ack_input_data); - else - rxrpc_propose_delay_ACK(call, serial, - rxrpc_propose_ack_input_data); + if (ack_reason >= 0) { + if (rxrpc_ack_priority[ack_reason] > rxrpc_ack_priority[*_ack_reason]) { + *_ack_serial = serial; + *_ack_reason = ack_reason; + } else if (rxrpc_ack_priority[ack_reason] == rxrpc_ack_priority[*_ack_reason] && + ack_reason == RXRPC_ACK_REQUESTED) { + *_ack_serial = serial; + *_ack_reason = ack_reason; + } + } } /* @@ -513,9 +526,11 @@ static bool rxrpc_input_split_jumbo(struct rxrpc_call *call, struct sk_buff *skb struct rxrpc_jumbo_header jhdr; struct rxrpc_skb_priv *sp = rxrpc_skb(skb), *jsp; struct sk_buff *jskb; + rxrpc_serial_t ack_serial = 0; unsigned int offset = sizeof(struct rxrpc_wire_header); unsigned int len = skb->len - offset; bool notify = false; + int ack_reason = 0; while (sp->hdr.flags & RXRPC_JUMBO_PACKET) { if (len < RXRPC_JUMBO_SUBPKTLEN) @@ -535,7 +550,7 @@ static bool rxrpc_input_split_jumbo(struct rxrpc_call *call, struct sk_buff *skb jsp = rxrpc_skb(jskb); jsp->offset = offset; jsp->len = RXRPC_JUMBO_DATALEN; - rxrpc_input_data_one(call, jskb, ¬ify); + rxrpc_input_data_one(call, jskb, ¬ify, &ack_serial, &ack_reason); rxrpc_free_skb(jskb, rxrpc_skb_put_jumbo_subpacket); sp->hdr.flags = jhdr.flags; @@ -548,7 +563,16 @@ static bool rxrpc_input_split_jumbo(struct rxrpc_call *call, struct sk_buff *skb sp->offset = offset; sp->len = len; - rxrpc_input_data_one(call, skb, ¬ify); + rxrpc_input_data_one(call, skb, ¬ify, &ack_serial, &ack_reason); + + if (ack_reason > 0) { + rxrpc_send_ACK(call, ack_reason, ack_serial, + rxrpc_propose_ack_input_data); + } else { + call->ackr_nr_unacked++; + rxrpc_propose_delay_ACK(call, sp->hdr.serial, + rxrpc_propose_ack_input_data); + } if (notify) { trace_rxrpc_notify_socket(call->debug_id, sp->hdr.serial); rxrpc_notify_socket(call); -- cgit v1.2.3 From cc349b0771dccebf0fa9f5e1822ac444aef11448 Mon Sep 17 00:00:00 2001 From: Daniel Golle Date: Tue, 7 May 2024 13:20:43 +0100 Subject: dt-bindings: net: mediatek: remove wrongly added clocks and SerDes Several clocks as well as both sgmiisys phandles were added by mistake to the Ethernet bindings for MT7988. Also, the total number of clocks didn't match with the actual number of items listed. This happened because the vendor driver which served as a reference uses a high number of syscon phandles to access various parts of the SoC which wasn't acceptable upstream. Hence several parts which have never previously been supported (such SerDes PHY and USXGMII PCS) are going to be implemented by separate drivers. As a result the device tree will look much more sane. Quickly align the bindings with the upcoming reality of the drivers actually adding support for the remaining Ethernet-related features of the MT7988 SoC. Fixes: c94a9aabec36 ("dt-bindings: net: mediatek,net: add mt7988-eth binding") Signed-off-by: Daniel Golle Acked-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/1569290b21cc787a424469ed74456a7e976b102d.1715084326.git.daniel@makrotopia.org Signed-off-by: Jakub Kicinski --- .../devicetree/bindings/net/mediatek,net.yaml | 22 ++-------------------- 1 file changed, 2 insertions(+), 20 deletions(-) diff --git a/Documentation/devicetree/bindings/net/mediatek,net.yaml b/Documentation/devicetree/bindings/net/mediatek,net.yaml index e74502a0afe8..3202dc7967c5 100644 --- a/Documentation/devicetree/bindings/net/mediatek,net.yaml +++ b/Documentation/devicetree/bindings/net/mediatek,net.yaml @@ -337,8 +337,8 @@ allOf: minItems: 4 clocks: - minItems: 34 - maxItems: 34 + minItems: 24 + maxItems: 24 clock-names: items: @@ -351,18 +351,6 @@ allOf: - const: ethwarp_wocpu1 - const: ethwarp_wocpu0 - const: esw - - const: netsys0 - - const: netsys1 - - const: sgmii_tx250m - - const: sgmii_rx250m - - const: sgmii2_tx250m - - const: sgmii2_rx250m - - const: top_usxgmii0_sel - - const: top_usxgmii1_sel - - const: top_sgm0_sel - - const: top_sgm1_sel - - const: top_xfi_phy0_xtal_sel - - const: top_xfi_phy1_xtal_sel - const: top_eth_gmii_sel - const: top_eth_refck_50m_sel - const: top_eth_sys_200m_sel @@ -375,16 +363,10 @@ allOf: - const: top_netsys_sync_250m_sel - const: top_netsys_ppefb_250m_sel - const: top_netsys_warp_sel - - const: wocpu1 - - const: wocpu0 - const: xgp1 - const: xgp2 - const: xgp3 - mediatek,sgmiisys: - minItems: 2 - maxItems: 2 - patternProperties: "^mac@[0-1]$": type: object -- cgit v1.2.3 From d101291b2681e5ab938554e3e323f7a7ee33e3aa Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Tue, 7 May 2024 16:31:45 +0000 Subject: ipv6: fib6_rules: avoid possible NULL dereference in fib6_rule_action() syzbot is able to trigger the following crash [1], caused by unsafe ip6_dst_idev() use. Indeed ip6_dst_idev() can return NULL, and must always be checked. [1] Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN PTI KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] CPU: 0 PID: 31648 Comm: syz-executor.0 Not tainted 6.9.0-rc4-next-20240417-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024 RIP: 0010:__fib6_rule_action net/ipv6/fib6_rules.c:237 [inline] RIP: 0010:fib6_rule_action+0x241/0x7b0 net/ipv6/fib6_rules.c:267 Code: 02 00 00 49 8d 9f d8 00 00 00 48 89 d8 48 c1 e8 03 42 80 3c 20 00 74 08 48 89 df e8 f9 32 bf f7 48 8b 1b 48 89 d8 48 c1 e8 03 <42> 80 3c 20 00 74 08 48 89 df e8 e0 32 bf f7 4c 8b 03 48 89 ef 4c RSP: 0018:ffffc9000fc1f2f0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 1a772f98c8186700 RDX: 0000000000000003 RSI: ffffffff8bcac4e0 RDI: ffffffff8c1f9760 RBP: ffff8880673fb980 R08: ffffffff8fac15ef R09: 1ffffffff1f582bd R10: dffffc0000000000 R11: fffffbfff1f582be R12: dffffc0000000000 R13: 0000000000000080 R14: ffff888076509000 R15: ffff88807a029a00 FS: 00007f55e82ca6c0(0000) GS:ffff8880b9400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000001b31d23000 CR3: 0000000022b66000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: fib_rules_lookup+0x62c/0xdb0 net/core/fib_rules.c:317 fib6_rule_lookup+0x1fd/0x790 net/ipv6/fib6_rules.c:108 ip6_route_output_flags_noref net/ipv6/route.c:2637 [inline] ip6_route_output_flags+0x38e/0x610 net/ipv6/route.c:2649 ip6_route_output include/net/ip6_route.h:93 [inline] ip6_dst_lookup_tail+0x189/0x11a0 net/ipv6/ip6_output.c:1120 ip6_dst_lookup_flow+0xb9/0x180 net/ipv6/ip6_output.c:1250 sctp_v6_get_dst+0x792/0x1e20 net/sctp/ipv6.c:326 sctp_transport_route+0x12c/0x2e0 net/sctp/transport.c:455 sctp_assoc_add_peer+0x614/0x15c0 net/sctp/associola.c:662 sctp_connect_new_asoc+0x31d/0x6c0 net/sctp/socket.c:1099 __sctp_connect+0x66d/0xe30 net/sctp/socket.c:1197 sctp_connect net/sctp/socket.c:4819 [inline] sctp_inet_connect+0x149/0x1f0 net/sctp/socket.c:4834 __sys_connect_file net/socket.c:2048 [inline] __sys_connect+0x2df/0x310 net/socket.c:2065 __do_sys_connect net/socket.c:2075 [inline] __se_sys_connect net/socket.c:2072 [inline] __x64_sys_connect+0x7a/0x90 net/socket.c:2072 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf5/0x240 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Fixes: 5e5f3f0f8013 ("[IPV6] ADDRCONF: Convert ipv6_get_saddr() to ipv6_dev_get_saddr().") Signed-off-by: Eric Dumazet Reviewed-by: Simon Horman Reviewed-by: David Ahern Link: https://lore.kernel.org/r/20240507163145.835254-1-edumazet@google.com Signed-off-by: Jakub Kicinski --- net/ipv6/fib6_rules.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/net/ipv6/fib6_rules.c b/net/ipv6/fib6_rules.c index 52c04f0ac498..9e254de7462f 100644 --- a/net/ipv6/fib6_rules.c +++ b/net/ipv6/fib6_rules.c @@ -233,8 +233,12 @@ static int __fib6_rule_action(struct fib_rule *rule, struct flowi *flp, rt = pol_lookup_func(lookup, net, table, flp6, arg->lookup_data, flags); if (rt != net->ipv6.ip6_null_entry) { + struct inet6_dev *idev = ip6_dst_idev(&rt->dst); + + if (!idev) + goto again; err = fib6_rule_saddr(net, rule, flags, flp6, - ip6_dst_idev(&rt->dst)->dev); + idev->dev); if (err == -EAGAIN) goto again; -- cgit v1.2.3 From 4893b8b3ef8db2b182d1a1bebf6c7acf91405000 Mon Sep 17 00:00:00 2001 From: Lukasz Majewski Date: Tue, 7 May 2024 13:12:14 +0200 Subject: hsr: Simplify code for announcing HSR nodes timer setup Up till now the code to start HSR announce timer, which triggers sending supervisory frames, was assuming that hsr_netdev_notify() would be called at least twice for hsrX interface. This was required to have different values for old and current values of network device's operstate. This is problematic for a case where hsrX interface is already in the operational state when hsr_netdev_notify() is called, so timer is not configured to trigger and as a result the hsrX is not sending supervisory frames to HSR ring. This error has been discovered when hsr_ping.sh script was run. To be more specific - for the hsr1 and hsr2 the hsr_netdev_notify() was called at least twice with different IF_OPER_{LOWERDOWN|DOWN|UP} states assigned in hsr_check_carrier_and_operstate(hsr). As a result there was no issue with sending supervisory frames. However, with hsr3, the notify function was called only once with operstate set to IF_OPER_UP and timer responsible for triggering supervisory frames was not fired. The solution is to use netif_oper_up() and netif_running() helper functions to assess if network hsrX device is up. Only then, when the timer is not already pending, it is started. Otherwise it is deactivated. Fixes: f421436a591d ("net/hsr: Add support for the High-availability Seamless Redundancy protocol (HSRv0)") Signed-off-by: Lukasz Majewski Reviewed-by: Simon Horman Link: https://lore.kernel.org/r/20240507111214.3519800-1-lukma@denx.de Signed-off-by: Jakub Kicinski --- net/hsr/hsr_device.c | 27 ++++++++++++--------------- 1 file changed, 12 insertions(+), 15 deletions(-) diff --git a/net/hsr/hsr_device.c b/net/hsr/hsr_device.c index e9d45133d641..5afc450d0855 100644 --- a/net/hsr/hsr_device.c +++ b/net/hsr/hsr_device.c @@ -61,39 +61,36 @@ static bool hsr_check_carrier(struct hsr_port *master) return false; } -static void hsr_check_announce(struct net_device *hsr_dev, - unsigned char old_operstate) +static void hsr_check_announce(struct net_device *hsr_dev) { struct hsr_priv *hsr; hsr = netdev_priv(hsr_dev); - - if (READ_ONCE(hsr_dev->operstate) == IF_OPER_UP && old_operstate != IF_OPER_UP) { - /* Went up */ - hsr->announce_count = 0; - mod_timer(&hsr->announce_timer, - jiffies + msecs_to_jiffies(HSR_ANNOUNCE_INTERVAL)); + if (netif_running(hsr_dev) && netif_oper_up(hsr_dev)) { + /* Enable announce timer and start sending supervisory frames */ + if (!timer_pending(&hsr->announce_timer)) { + hsr->announce_count = 0; + mod_timer(&hsr->announce_timer, jiffies + + msecs_to_jiffies(HSR_ANNOUNCE_INTERVAL)); + } + } else { + /* Deactivate the announce timer */ + timer_delete(&hsr->announce_timer); } - - if (READ_ONCE(hsr_dev->operstate) != IF_OPER_UP && old_operstate == IF_OPER_UP) - /* Went down */ - del_timer(&hsr->announce_timer); } void hsr_check_carrier_and_operstate(struct hsr_priv *hsr) { struct hsr_port *master; - unsigned char old_operstate; bool has_carrier; master = hsr_port_get_hsr(hsr, HSR_PT_MASTER); /* netif_stacked_transfer_operstate() cannot be used here since * it doesn't set IF_OPER_LOWERLAYERDOWN (?) */ - old_operstate = READ_ONCE(master->dev->operstate); has_carrier = hsr_check_carrier(master); hsr_set_operstate(master, has_carrier); - hsr_check_announce(master->dev, old_operstate); + hsr_check_announce(master->dev); } int hsr_get_max_mtu(struct hsr_priv *hsr) -- cgit v1.2.3 From 4db783d68b9b39a411a96096c10828ff5dfada7a Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Tue, 7 May 2024 16:18:42 +0000 Subject: ipv6: prevent NULL dereference in ip6_output() According to syzbot, there is a chance that ip6_dst_idev() returns NULL in ip6_output(). Most places in IPv6 stack deal with a NULL idev just fine, but not here. syzbot reported: general protection fault, probably for non-canonical address 0xdffffc00000000bc: 0000 [#1] PREEMPT SMP KASAN PTI KASAN: null-ptr-deref in range [0x00000000000005e0-0x00000000000005e7] CPU: 0 PID: 9775 Comm: syz-executor.4 Not tainted 6.9.0-rc5-syzkaller-00157-g6a30653b604a #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024 RIP: 0010:ip6_output+0x231/0x3f0 net/ipv6/ip6_output.c:237 Code: 3c 1e 00 49 89 df 74 08 4c 89 ef e8 19 58 db f7 48 8b 44 24 20 49 89 45 00 49 89 c5 48 8d 9d e0 05 00 00 48 89 d8 48 c1 e8 03 <42> 0f b6 04 38 84 c0 4c 8b 74 24 28 0f 85 61 01 00 00 8b 1b 31 ff RSP: 0018:ffffc9000927f0d8 EFLAGS: 00010202 RAX: 00000000000000bc RBX: 00000000000005e0 RCX: 0000000000040000 RDX: ffffc900131f9000 RSI: 0000000000004f47 RDI: 0000000000004f48 RBP: 0000000000000000 R08: ffffffff8a1f0b9a R09: 1ffffffff1f51fad R10: dffffc0000000000 R11: fffffbfff1f51fae R12: ffff8880293ec8c0 R13: ffff88805d7fc000 R14: 1ffff1100527d91a R15: dffffc0000000000 FS: 00007f135c6856c0(0000) GS:ffff8880b9400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020000080 CR3: 0000000064096000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: NF_HOOK include/linux/netfilter.h:314 [inline] ip6_xmit+0xefe/0x17f0 net/ipv6/ip6_output.c:358 sctp_v6_xmit+0x9f2/0x13f0 net/sctp/ipv6.c:248 sctp_packet_transmit+0x26ad/0x2ca0 net/sctp/output.c:653 sctp_packet_singleton+0x22c/0x320 net/sctp/outqueue.c:783 sctp_outq_flush_ctrl net/sctp/outqueue.c:914 [inline] sctp_outq_flush+0x6d5/0x3e20 net/sctp/outqueue.c:1212 sctp_side_effects net/sctp/sm_sideeffect.c:1198 [inline] sctp_do_sm+0x59cc/0x60c0 net/sctp/sm_sideeffect.c:1169 sctp_primitive_ASSOCIATE+0x95/0xc0 net/sctp/primitive.c:73 __sctp_connect+0x9cd/0xe30 net/sctp/socket.c:1234 sctp_connect net/sctp/socket.c:4819 [inline] sctp_inet_connect+0x149/0x1f0 net/sctp/socket.c:4834 __sys_connect_file net/socket.c:2048 [inline] __sys_connect+0x2df/0x310 net/socket.c:2065 __do_sys_connect net/socket.c:2075 [inline] __se_sys_connect net/socket.c:2072 [inline] __x64_sys_connect+0x7a/0x90 net/socket.c:2072 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf5/0x240 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Fixes: 778d80be5269 ("ipv6: Add disable_ipv6 sysctl to disable IPv6 operaion on specific interface.") Reported-by: syzbot Signed-off-by: Eric Dumazet Reviewed-by: Larysa Zaremba Link: https://lore.kernel.org/r/20240507161842.773961-1-edumazet@google.com Signed-off-by: Jakub Kicinski --- net/ipv6/ip6_output.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/ipv6/ip6_output.c b/net/ipv6/ip6_output.c index fa2937732665..97b0788b31ba 100644 --- a/net/ipv6/ip6_output.c +++ b/net/ipv6/ip6_output.c @@ -234,7 +234,7 @@ int ip6_output(struct net *net, struct sock *sk, struct sk_buff *skb) skb->protocol = htons(ETH_P_IPV6); skb->dev = dev; - if (unlikely(READ_ONCE(idev->cnf.disable_ipv6))) { + if (unlikely(!idev || READ_ONCE(idev->cnf.disable_ipv6))) { IP6_INC_STATS(net, idev, IPSTATS_MIB_OUTDISCARDS); kfree_skb_reason(skb, SKB_DROP_REASON_IPV6DISABLED); return 0; -- cgit v1.2.3 From 2ddc0dd7fec86ee53b8928a5cca5fbddd4fc7c06 Mon Sep 17 00:00:00 2001 From: Wen Gu Date: Tue, 7 May 2024 20:53:31 +0800 Subject: net/smc: fix neighbour and rtable leak in smc_ib_find_route() In smc_ib_find_route(), the neighbour found by neigh_lookup() and rtable resolved by ip_route_output_flow() are not released or put before return. It may cause the refcount leak, so fix it. Link: https://lore.kernel.org/r/20240506015439.108739-1-guwen@linux.alibaba.com Fixes: e5c4744cfb59 ("net/smc: add SMC-Rv2 connection establishment") Signed-off-by: Wen Gu Link: https://lore.kernel.org/r/20240507125331.2808-1-guwen@linux.alibaba.com Signed-off-by: Paolo Abeni --- net/smc/smc_ib.c | 19 ++++++++++++------- 1 file changed, 12 insertions(+), 7 deletions(-) diff --git a/net/smc/smc_ib.c b/net/smc/smc_ib.c index 97704a9e84c7..9297dc20bfe2 100644 --- a/net/smc/smc_ib.c +++ b/net/smc/smc_ib.c @@ -209,13 +209,18 @@ int smc_ib_find_route(struct net *net, __be32 saddr, __be32 daddr, if (IS_ERR(rt)) goto out; if (rt->rt_uses_gateway && rt->rt_gw_family != AF_INET) - goto out; - neigh = rt->dst.ops->neigh_lookup(&rt->dst, NULL, &fl4.daddr); - if (neigh) { - memcpy(nexthop_mac, neigh->ha, ETH_ALEN); - *uses_gateway = rt->rt_uses_gateway; - return 0; - } + goto out_rt; + neigh = dst_neigh_lookup(&rt->dst, &fl4.daddr); + if (!neigh) + goto out_rt; + memcpy(nexthop_mac, neigh->ha, ETH_ALEN); + *uses_gateway = rt->rt_uses_gateway; + neigh_release(neigh); + ip_rt_put(rt); + return 0; + +out_rt: + ip_rt_put(rt); out: return -ENOENT; } -- cgit v1.2.3 From 05eb60e9648cca0beeebdbcd263b599fb58aee48 Mon Sep 17 00:00:00 2001 From: Peiyang Wang Date: Tue, 7 May 2024 21:42:18 +0800 Subject: net: hns3: using user configure after hardware reset When a reset occurring, it's supposed to recover user's configuration. Currently, the port info(speed, duplex and autoneg) is stored in hclge_mac and will be scheduled updated. Consider the case that reset was happened consecutively. During the first reset, the port info is configured with a temporary value cause the PHY is reset and looking for best link config. Second reset start and use pervious configuration which is not the user's. The specific process is as follows: +------+ +----+ +----+ | USER | | PF | | HW | +---+--+ +-+--+ +-+--+ | ethtool --reset | | +------------------->| reset command | | ethtool --reset +-------------------->| +------------------->| +---+ | +---+ | | | | |reset currently | | HW RESET | | |and wait to do | | | |<--+ | | | | send pervious cfg |<--+ | | (1000M FULL AN_ON) | | +-------------------->| | | read cfg(time task) | | | (10M HALF AN_OFF) +---+ | |<--------------------+ | cfg take effect | | reset command |<--+ | +-------------------->| | | +---+ | | send pervious cfg | | HW RESET | | (10M HALF AN_OFF) |<--+ | +-------------------->| | | read cfg(time task) | | | (10M HALF AN_OFF) +---+ | |<--------------------+ | cfg take effect | | | | | | read cfg(time task) |<--+ | | (10M HALF AN_OFF) | | |<--------------------+ | | | v v v To avoid aboved situation, this patch introduced req_speed, req_duplex, req_autoneg to store user's configuration and it only be used after hardware reset and to recover user's configuration Fixes: f5f2b3e4dcc0 ("net: hns3: add support for imp-controlled PHYs") Signed-off-by: Peiyang Wang Signed-off-by: Jijie Shao Reviewed-by: Przemek Kitszel Reviewed-by: Simon Horman Signed-off-by: Paolo Abeni --- drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 15 +++++++++------ drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h | 3 +++ 2 files changed, 12 insertions(+), 6 deletions(-) diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c index ff6a2ed23ddb..8043f1795dc7 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c @@ -1537,6 +1537,9 @@ static int hclge_configure(struct hclge_dev *hdev) cfg.default_speed, ret); return ret; } + hdev->hw.mac.req_speed = hdev->hw.mac.speed; + hdev->hw.mac.req_autoneg = AUTONEG_ENABLE; + hdev->hw.mac.req_duplex = DUPLEX_FULL; hclge_parse_link_mode(hdev, cfg.speed_ability); @@ -3342,9 +3345,9 @@ hclge_set_phy_link_ksettings(struct hnae3_handle *handle, return ret; } - hdev->hw.mac.autoneg = cmd->base.autoneg; - hdev->hw.mac.speed = cmd->base.speed; - hdev->hw.mac.duplex = cmd->base.duplex; + hdev->hw.mac.req_autoneg = cmd->base.autoneg; + hdev->hw.mac.req_speed = cmd->base.speed; + hdev->hw.mac.req_duplex = cmd->base.duplex; linkmode_copy(hdev->hw.mac.advertising, cmd->link_modes.advertising); return 0; @@ -3377,9 +3380,9 @@ static int hclge_tp_port_init(struct hclge_dev *hdev) if (!hnae3_dev_phy_imp_supported(hdev)) return 0; - cmd.base.autoneg = hdev->hw.mac.autoneg; - cmd.base.speed = hdev->hw.mac.speed; - cmd.base.duplex = hdev->hw.mac.duplex; + cmd.base.autoneg = hdev->hw.mac.req_autoneg; + cmd.base.speed = hdev->hw.mac.req_speed; + cmd.base.duplex = hdev->hw.mac.req_duplex; linkmode_copy(cmd.link_modes.advertising, hdev->hw.mac.advertising); return hclge_set_phy_link_ksettings(&hdev->vport->nic, &cmd); diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h index e821dd2f1528..e3c69be8256f 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h @@ -279,11 +279,14 @@ struct hclge_mac { u8 media_type; /* port media type, e.g. fibre/copper/backplane */ u8 mac_addr[ETH_ALEN]; u8 autoneg; + u8 req_autoneg; u8 duplex; + u8 req_duplex; u8 support_autoneg; u8 speed_type; /* 0: sfp speed, 1: active speed */ u8 lane_num; u32 speed; + u32 req_speed; u32 max_speed; u32 speed_ability; /* speed ability supported by current media */ u32 module_type; /* sub media type, e.g. kr/cr/sr/lr */ -- cgit v1.2.3 From 669554c512d2107e2f21616f38e050d40655101f Mon Sep 17 00:00:00 2001 From: Jian Shen Date: Tue, 7 May 2024 21:42:19 +0800 Subject: net: hns3: direct return when receive a unknown mailbox message Currently, the driver didn't return when receive a unknown mailbox message, and continue checking whether need to generate a response. It's unnecessary and may be incorrect. Fixes: bb5790b71bad ("net: hns3: refactor mailbox response scheme between PF and VF") Signed-off-by: Jian Shen Signed-off-by: Jijie Shao Reviewed-by: Simon Horman Signed-off-by: Paolo Abeni --- drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c index d4a0e0be7a72..59c863306657 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c @@ -1077,12 +1077,13 @@ static void hclge_mbx_request_handling(struct hclge_mbx_ops_param *param) hdev = param->vport->back; cmd_func = hclge_mbx_ops_list[param->req->msg.code]; - if (cmd_func) - ret = cmd_func(param); - else + if (!cmd_func) { dev_err(&hdev->pdev->dev, "un-supported mailbox message, code = %u\n", param->req->msg.code); + return; + } + ret = cmd_func(param); /* PF driver should not reply IMP */ if (hnae3_get_bit(param->req->mbx_need_resp, HCLGE_MBX_NEED_RESP_B) && -- cgit v1.2.3 From 6639a7b953212ac51aa4baa7d7fb855bf736cf56 Mon Sep 17 00:00:00 2001 From: Peiyang Wang Date: Tue, 7 May 2024 21:42:20 +0800 Subject: net: hns3: change type of numa_node_mask as nodemask_t It provides nodemask_t to describe the numa node mask in kernel. To improve transportability, change the type of numa_node_mask as nodemask_t. Fixes: 38caee9d3ee8 ("net: hns3: Add support of the HNAE3 framework") Signed-off-by: Peiyang Wang Signed-off-by: Jijie Shao Reviewed-by: Simon Horman Signed-off-by: Paolo Abeni --- drivers/net/ethernet/hisilicon/hns3/hnae3.h | 2 +- drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 6 ++++-- drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h | 2 +- drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c | 7 ++++--- drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.h | 2 +- 5 files changed, 11 insertions(+), 8 deletions(-) diff --git a/drivers/net/ethernet/hisilicon/hns3/hnae3.h b/drivers/net/ethernet/hisilicon/hns3/hnae3.h index f19f1e1d1f9f..133c94646c21 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hnae3.h +++ b/drivers/net/ethernet/hisilicon/hns3/hnae3.h @@ -897,7 +897,7 @@ struct hnae3_handle { struct hnae3_roce_private_info rinfo; }; - u32 numa_node_mask; /* for multi-chip support */ + nodemask_t numa_node_mask; /* for multi-chip support */ enum hnae3_port_base_vlan_state port_base_vlan_state; diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c index 8043f1795dc7..ecff9b426527 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c @@ -1769,7 +1769,8 @@ static int hclge_vport_setup(struct hclge_vport *vport, u16 num_tqps) nic->pdev = hdev->pdev; nic->ae_algo = &ae_algo; - nic->numa_node_mask = hdev->numa_node_mask; + bitmap_copy(nic->numa_node_mask.bits, hdev->numa_node_mask.bits, + MAX_NUMNODES); nic->kinfo.io_base = hdev->hw.hw.io_base; ret = hclge_knic_setup(vport, num_tqps, @@ -2461,7 +2462,8 @@ static int hclge_init_roce_base_info(struct hclge_vport *vport) roce->pdev = nic->pdev; roce->ae_algo = nic->ae_algo; - roce->numa_node_mask = nic->numa_node_mask; + bitmap_copy(roce->numa_node_mask.bits, nic->numa_node_mask.bits, + MAX_NUMNODES); return 0; } diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h index e3c69be8256f..3a9186457ad8 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h @@ -894,7 +894,7 @@ struct hclge_dev { u16 fdir_pf_filter_count; /* Num of guaranteed filters for this PF */ u16 num_alloc_vport; /* Num vports this driver supports */ - u32 numa_node_mask; + nodemask_t numa_node_mask; u16 rx_buf_len; u16 num_tx_desc; /* desc num of per tx queue */ u16 num_rx_desc; /* desc num of per rx queue */ diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c index 0aa9beefd1c7..b57111252d07 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c @@ -412,7 +412,8 @@ static int hclgevf_set_handle_info(struct hclgevf_dev *hdev) nic->ae_algo = &ae_algovf; nic->pdev = hdev->pdev; - nic->numa_node_mask = hdev->numa_node_mask; + bitmap_copy(nic->numa_node_mask.bits, hdev->numa_node_mask.bits, + MAX_NUMNODES); nic->flags |= HNAE3_SUPPORT_VF; nic->kinfo.io_base = hdev->hw.hw.io_base; @@ -2082,8 +2083,8 @@ static int hclgevf_init_roce_base_info(struct hclgevf_dev *hdev) roce->pdev = nic->pdev; roce->ae_algo = nic->ae_algo; - roce->numa_node_mask = nic->numa_node_mask; - + bitmap_copy(roce->numa_node_mask.bits, nic->numa_node_mask.bits, + MAX_NUMNODES); return 0; } diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.h b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.h index a73f2bf3a56a..cccef3228461 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.h +++ b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.h @@ -236,7 +236,7 @@ struct hclgevf_dev { u16 rss_size_max; /* HW defined max RSS task queue */ u16 num_alloc_vport; /* num vports this driver supports */ - u32 numa_node_mask; + nodemask_t numa_node_mask; u16 rx_buf_len; u16 num_tx_desc; /* desc num of per tx queue */ u16 num_rx_desc; /* desc num of per rx queue */ -- cgit v1.2.3 From 950aa42399893a170d9b57eda0e4a3ff91fd8b70 Mon Sep 17 00:00:00 2001 From: Peiyang Wang Date: Tue, 7 May 2024 21:42:21 +0800 Subject: net: hns3: release PTP resources if pf initialization failed During the PF initialization process, hclge_update_port_info may return an error code for some reason. At this point, the ptp initialization has been completed. To void memory leaks, the resources that are applied by ptp should be released. Therefore, when hclge_update_port_info returns an error code, hclge_ptp_uninit is called to release the corresponding resources. Fixes: eaf83ae59e18 ("net: hns3: add querying fec ability from firmware") Signed-off-by: Peiyang Wang Signed-off-by: Jijie Shao Reviewed-by: Hariprasad Kelam Signed-off-by: Paolo Abeni --- drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c index ecff9b426527..1d255b3ae988 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c @@ -11764,7 +11764,7 @@ static int hclge_init_ae_dev(struct hnae3_ae_dev *ae_dev) ret = hclge_update_port_info(hdev); if (ret) - goto err_mdiobus_unreg; + goto err_ptp_uninit; INIT_KFIFO(hdev->mac_tnl_log); @@ -11815,6 +11815,8 @@ static int hclge_init_ae_dev(struct hnae3_ae_dev *ae_dev) devl_unlock(hdev->devlink); return 0; +err_ptp_uninit: + hclge_ptp_uninit(hdev); err_mdiobus_unreg: if (hdev->hw.mac.phydev) mdiobus_unregister(hdev->hw.mac.mdio_bus); -- cgit v1.2.3 From 094c281228529d333458208fd02fcac3b139d93b Mon Sep 17 00:00:00 2001 From: Peiyang Wang Date: Tue, 7 May 2024 21:42:22 +0800 Subject: net: hns3: use appropriate barrier function after setting a bit value There is a memory barrier in followed case. When set the port down, hclgevf_set_timmer will set DOWN in state. Meanwhile, the service task has different behaviour based on whether the state is DOWN. Thus, to make sure service task see DOWN, use smp_mb__after_atomic after calling set_bit(). CPU0 CPU1 ========================== =================================== hclgevf_set_timer_task() hclgevf_periodic_service_task() set_bit(DOWN,state) test_bit(DOWN,state) pf also has this issue. Fixes: ff200099d271 ("net: hns3: remove unnecessary work in hclgevf_main") Fixes: 1c6dfe6fc6f7 ("net: hns3: remove mailbox and reset work in hclge_main") Signed-off-by: Peiyang Wang Signed-off-by: Jijie Shao Reviewed-by: Simon Horman Signed-off-by: Paolo Abeni --- drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 3 +-- drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c | 3 +-- 2 files changed, 2 insertions(+), 4 deletions(-) diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c index 1d255b3ae988..e3d6a64b4575 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c @@ -7957,8 +7957,7 @@ static void hclge_set_timer_task(struct hnae3_handle *handle, bool enable) /* Set the DOWN flag here to disable link updating */ set_bit(HCLGE_STATE_DOWN, &hdev->state); - /* flush memory to make sure DOWN is seen by service task */ - smp_mb__before_atomic(); + smp_mb__after_atomic(); /* flush memory to make sure DOWN is seen by service task */ hclge_flush_link_update(hdev); } } diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c index b57111252d07..08db8e84be4e 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c @@ -2181,8 +2181,7 @@ static void hclgevf_set_timer_task(struct hnae3_handle *handle, bool enable) } else { set_bit(HCLGEVF_STATE_DOWN, &hdev->state); - /* flush memory to make sure DOWN is seen by service task */ - smp_mb__before_atomic(); + smp_mb__after_atomic(); /* flush memory to make sure DOWN is seen by service task */ hclgevf_flush_link_update(hdev); } } -- cgit v1.2.3 From f5db7a3b65c84d723ca5e2bb6e83115180ab6336 Mon Sep 17 00:00:00 2001 From: Yonglong Liu Date: Tue, 7 May 2024 21:42:23 +0800 Subject: net: hns3: fix port vlan filter not disabled issue According to hardware limitation, for device support modify VLAN filter state but not support bypass port VLAN filter, it should always disable the port VLAN filter. but the driver enables port VLAN filter when initializing, if there is no VLAN(except VLAN 0) id added, the driver will disable it in service task. In most time, it works fine. But there is a time window before the service task shceduled and net device being registered. So if user adds VLAN at this time, the driver will not update the VLAN filter state, and the port VLAN filter remains enabled. To fix the problem, if support modify VLAN filter state but not support bypass port VLAN filter, set the port vlan filter to "off". Fixes: 184cd221a863 ("net: hns3: disable port VLAN filter when support function level VLAN filter control") Fixes: 2ba306627f59 ("net: hns3: add support for modify VLAN filter state") Signed-off-by: Yonglong Liu Signed-off-by: Jijie Shao Reviewed-by: Simon Horman Signed-off-by: Paolo Abeni --- drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c index e3d6a64b4575..0773124440e9 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c @@ -9910,6 +9910,7 @@ static int hclge_set_vlan_protocol_type(struct hclge_dev *hdev) static int hclge_init_vlan_filter(struct hclge_dev *hdev) { struct hclge_vport *vport; + bool enable = true; int ret; int i; @@ -9929,8 +9930,12 @@ static int hclge_init_vlan_filter(struct hclge_dev *hdev) vport->cur_vlan_fltr_en = true; } + if (test_bit(HNAE3_DEV_SUPPORT_VLAN_FLTR_MDF_B, hdev->ae_dev->caps) && + !test_bit(HNAE3_DEV_SUPPORT_PORT_VLAN_BYPASS_B, hdev->ae_dev->caps)) + enable = false; + return hclge_set_vlan_filter_ctrl(hdev, HCLGE_FILTER_TYPE_PORT, - HCLGE_FILTER_FE_INGRESS, true, 0); + HCLGE_FILTER_FE_INGRESS, enable, 0); } static int hclge_init_vlan_type(struct hclge_dev *hdev) -- cgit v1.2.3 From 35d92abfbad88cf947c010baf34b075e40566095 Mon Sep 17 00:00:00 2001 From: Yonglong Liu Date: Tue, 7 May 2024 21:42:24 +0800 Subject: net: hns3: fix kernel crash when devlink reload during initialization The devlink reload process will access the hardware resources, but the register operation is done before the hardware is initialized. So, processing the devlink reload during initialization may lead to kernel crash. This patch fixes this by registering the devlink after hardware initialization. Fixes: cd6242991d2e ("net: hns3: add support for registering devlink for VF") Fixes: 93305b77ffcb ("net: hns3: fix kernel crash when devlink reload during pf initialization") Signed-off-by: Yonglong Liu Signed-off-by: Jijie Shao Signed-off-by: Paolo Abeni --- drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 17 +++++------------ .../net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c | 10 ++++------ 2 files changed, 9 insertions(+), 18 deletions(-) diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c index 0773124440e9..ce60332d83c3 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c @@ -11631,16 +11631,10 @@ static int hclge_init_ae_dev(struct hnae3_ae_dev *ae_dev) if (ret) goto out; - ret = hclge_devlink_init(hdev); - if (ret) - goto err_pci_uninit; - - devl_lock(hdev->devlink); - /* Firmware command queue initialize */ ret = hclge_comm_cmd_queue_init(hdev->pdev, &hdev->hw.hw); if (ret) - goto err_devlink_uninit; + goto err_pci_uninit; /* Firmware command initialize */ ret = hclge_comm_cmd_init(hdev->ae_dev, &hdev->hw.hw, &hdev->fw_version, @@ -11808,6 +11802,10 @@ static int hclge_init_ae_dev(struct hnae3_ae_dev *ae_dev) dev_warn(&pdev->dev, "failed to wake on lan init, ret = %d\n", ret); + ret = hclge_devlink_init(hdev); + if (ret) + goto err_ptp_uninit; + hclge_state_init(hdev); hdev->last_reset_time = jiffies; @@ -11815,8 +11813,6 @@ static int hclge_init_ae_dev(struct hnae3_ae_dev *ae_dev) HCLGE_DRIVER_NAME); hclge_task_schedule(hdev, round_jiffies_relative(HZ)); - - devl_unlock(hdev->devlink); return 0; err_ptp_uninit: @@ -11830,9 +11826,6 @@ err_msi_uninit: pci_free_irq_vectors(pdev); err_cmd_uninit: hclge_comm_cmd_uninit(hdev->ae_dev, &hdev->hw.hw); -err_devlink_uninit: - devl_unlock(hdev->devlink); - hclge_devlink_uninit(hdev); err_pci_uninit: pcim_iounmap(pdev, hdev->hw.hw.io_base); pci_release_regions(pdev); diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c index 08db8e84be4e..43ee20eb03d1 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c @@ -2845,10 +2845,6 @@ static int hclgevf_init_hdev(struct hclgevf_dev *hdev) if (ret) return ret; - ret = hclgevf_devlink_init(hdev); - if (ret) - goto err_devlink_init; - ret = hclge_comm_cmd_queue_init(hdev->pdev, &hdev->hw.hw); if (ret) goto err_cmd_queue_init; @@ -2941,6 +2937,10 @@ static int hclgevf_init_hdev(struct hclgevf_dev *hdev) hclgevf_init_rxd_adv_layout(hdev); + ret = hclgevf_devlink_init(hdev); + if (ret) + goto err_config; + set_bit(HCLGEVF_STATE_SERVICE_INITED, &hdev->state); hdev->last_reset_time = jiffies; @@ -2960,8 +2960,6 @@ err_misc_irq_init: err_cmd_init: hclge_comm_cmd_uninit(hdev->ae_dev, &hdev->hw.hw); err_cmd_queue_init: - hclgevf_devlink_uninit(hdev); -err_devlink_init: hclgevf_pci_uninit(hdev); clear_bit(HCLGEVF_STATE_IRQ_INITED, &hdev->state); return ret; -- cgit v1.2.3 From f39bf3cf08a49e7d20c44bc8bc8e390fea69959a Mon Sep 17 00:00:00 2001 From: Steffen Bätz Date: Wed, 8 May 2024 09:29:43 +0200 Subject: net: dsa: mv88e6xxx: add phylink_get_caps for the mv88e6320/21 family MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit As of commit de5c9bf40c45 ("net: phylink: require supported_interfaces to be filled") Marvell 88e6320/21 switches fail to be probed: ... mv88e6085 30be0000.ethernet-1:00: phylink: error: empty supported_interfaces error creating PHYLINK: -22 ... The problem stems from the use of mv88e6185_phylink_get_caps() to get the device capabilities. Since there are serdes only ports 0/1 included, create a new dedicated phylink_get_caps for the 6320 and 6321 to properly support their set of capabilities. Fixes: de5c9bf40c45 ("net: phylink: require supported_interfaces to be filled") Signed-off-by: Steffen Bätz Reviewed-by: Andrew Lunn Reviewed-by: Fabio Estevam Link: https://lore.kernel.org/r/20240508072944.54880-2-steffen@innosonix.de Signed-off-by: Paolo Abeni --- drivers/net/dsa/mv88e6xxx/chip.c | 16 ++++++++++++++-- 1 file changed, 14 insertions(+), 2 deletions(-) diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c index 14daf432f30b..61c0070c7610 100644 --- a/drivers/net/dsa/mv88e6xxx/chip.c +++ b/drivers/net/dsa/mv88e6xxx/chip.c @@ -697,6 +697,18 @@ static void mv88e6352_phylink_get_caps(struct mv88e6xxx_chip *chip, int port, } } +static void mv88e632x_phylink_get_caps(struct mv88e6xxx_chip *chip, int port, + struct phylink_config *config) +{ + unsigned long *supported = config->supported_interfaces; + + /* Translate the default cmode */ + mv88e6xxx_translate_cmode(chip->ports[port].cmode, supported); + + config->mac_capabilities = MAC_SYM_PAUSE | MAC_10 | MAC_100 | + MAC_1000FD; +} + static void mv88e6341_phylink_get_caps(struct mv88e6xxx_chip *chip, int port, struct phylink_config *config) { @@ -5093,7 +5105,7 @@ static const struct mv88e6xxx_ops mv88e6320_ops = { .gpio_ops = &mv88e6352_gpio_ops, .avb_ops = &mv88e6352_avb_ops, .ptp_ops = &mv88e6352_ptp_ops, - .phylink_get_caps = mv88e6185_phylink_get_caps, + .phylink_get_caps = mv88e632x_phylink_get_caps, }; static const struct mv88e6xxx_ops mv88e6321_ops = { @@ -5139,7 +5151,7 @@ static const struct mv88e6xxx_ops mv88e6321_ops = { .gpio_ops = &mv88e6352_gpio_ops, .avb_ops = &mv88e6352_avb_ops, .ptp_ops = &mv88e6352_ptp_ops, - .phylink_get_caps = mv88e6185_phylink_get_caps, + .phylink_get_caps = mv88e632x_phylink_get_caps, }; static const struct mv88e6xxx_ops mv88e6341_ops = { -- cgit v1.2.3 From 6e7ffa180a532b6fe2e22aa6182e02ce988a43aa Mon Sep 17 00:00:00 2001 From: Steffen Bätz Date: Wed, 8 May 2024 09:29:44 +0200 Subject: net: dsa: mv88e6xxx: read cmode on mv88e6320/21 serdes only ports MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit On the mv88e6320 and 6321 switch family, port 0/1 are serdes only ports. Modified the mv88e6352_get_port4_serdes_cmode function to pass a port number since the register set of the 6352 is equal on the 6320/21. Signed-off-by: Steffen Bätz Reviewed-by: Andrew Lunn Reviewed-by: Fabio Estevam Link: https://lore.kernel.org/r/20240508072944.54880-3-steffen@innosonix.de Signed-off-by: Paolo Abeni --- drivers/net/dsa/mv88e6xxx/chip.c | 23 +++++++++++++++++------ 1 file changed, 17 insertions(+), 6 deletions(-) diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c index 61c0070c7610..0918bd6fa81d 100644 --- a/drivers/net/dsa/mv88e6xxx/chip.c +++ b/drivers/net/dsa/mv88e6xxx/chip.c @@ -637,12 +637,12 @@ static void mv88e6351_phylink_get_caps(struct mv88e6xxx_chip *chip, int port, MAC_1000FD; } -static int mv88e6352_get_port4_serdes_cmode(struct mv88e6xxx_chip *chip) +static int mv88e63xx_get_port_serdes_cmode(struct mv88e6xxx_chip *chip, int port) { u16 reg, val; int err; - err = mv88e6xxx_port_read(chip, 4, MV88E6XXX_PORT_STS, ®); + err = mv88e6xxx_port_read(chip, port, MV88E6XXX_PORT_STS, ®); if (err) return err; @@ -651,16 +651,16 @@ static int mv88e6352_get_port4_serdes_cmode(struct mv88e6xxx_chip *chip) return 0xf; val = reg & ~MV88E6XXX_PORT_STS_PHY_DETECT; - err = mv88e6xxx_port_write(chip, 4, MV88E6XXX_PORT_STS, val); + err = mv88e6xxx_port_write(chip, port, MV88E6XXX_PORT_STS, val); if (err) return err; - err = mv88e6xxx_port_read(chip, 4, MV88E6XXX_PORT_STS, &val); + err = mv88e6xxx_port_read(chip, port, MV88E6XXX_PORT_STS, &val); if (err) return err; /* Restore PHY_DETECT value */ - err = mv88e6xxx_port_write(chip, 4, MV88E6XXX_PORT_STS, reg); + err = mv88e6xxx_port_write(chip, port, MV88E6XXX_PORT_STS, reg); if (err) return err; @@ -688,7 +688,7 @@ static void mv88e6352_phylink_get_caps(struct mv88e6xxx_chip *chip, int port, if (err <= 0) return; - cmode = mv88e6352_get_port4_serdes_cmode(chip); + cmode = mv88e63xx_get_port_serdes_cmode(chip, port); if (cmode < 0) dev_err(chip->dev, "p%d: failed to read serdes cmode\n", port); @@ -701,12 +701,23 @@ static void mv88e632x_phylink_get_caps(struct mv88e6xxx_chip *chip, int port, struct phylink_config *config) { unsigned long *supported = config->supported_interfaces; + int cmode; /* Translate the default cmode */ mv88e6xxx_translate_cmode(chip->ports[port].cmode, supported); config->mac_capabilities = MAC_SYM_PAUSE | MAC_10 | MAC_100 | MAC_1000FD; + + /* Port 0/1 are serdes only ports */ + if (port == 0 || port == 1) { + cmode = mv88e63xx_get_port_serdes_cmode(chip, port); + if (cmode < 0) + dev_err(chip->dev, "p%d: failed to read serdes cmode\n", + port); + else + mv88e6xxx_translate_cmode(cmode, supported); + } } static void mv88e6341_phylink_get_caps(struct mv88e6xxx_chip *chip, int port, -- cgit v1.2.3