From eb14120f743d29744d9475bffec56ff4ad43a749 Mon Sep 17 00:00:00 2001 From: Dominik Brodowski Date: Sun, 7 Mar 2010 12:21:16 +0100 Subject: pcmcia: re-work pcmcia_request_irq() Instead of the old pcmcia_request_irq() interface, drivers may now choose between: - calling request_irq/free_irq directly. Use the IRQ from *p_dev->irq. - use pcmcia_request_irq(p_dev, handler_t); the PCMCIA core will clean up automatically on calls to pcmcia_disable_device() or device ejection. - drivers still not capable of IRQF_SHARED (or not telling us so) may use the deprecated pcmcia_request_exclusive_irq() for the time being; they might receive a shared IRQ nonetheless. CC: linux-bluetooth@vger.kernel.org CC: netdev@vger.kernel.org CC: linux-wireless@vger.kernel.org CC: linux-serial@vger.kernel.org CC: alsa-devel@alsa-project.org CC: linux-usb@vger.kernel.org CC: linux-ide@vger.kernel.org Signed-off-by: Dominik Brodowski --- Documentation/pcmcia/driver-changes.txt | 10 ++ drivers/ata/pata_pcmcia.c | 6 +- drivers/bluetooth/bluecard_cs.c | 7 +- drivers/bluetooth/bt3c_cs.c | 7 +- drivers/bluetooth/btuart_cs.c | 7 +- drivers/bluetooth/dtl1_cs.c | 7 +- drivers/char/pcmcia/ipwireless/main.c | 11 +- drivers/char/pcmcia/synclink_cs.c | 12 +- drivers/ide/ide-cs.c | 8 +- drivers/isdn/hardware/avm/avm_cs.c | 17 +-- drivers/isdn/hisax/avma1_cs.c | 12 +- drivers/isdn/hisax/elsa_cs.c | 13 +-- drivers/isdn/hisax/sedlbauer_cs.c | 23 +--- drivers/isdn/hisax/teles_cs.c | 13 +-- drivers/net/pcmcia/3c574_cs.c | 6 +- drivers/net/pcmcia/3c589_cs.c | 7 +- drivers/net/pcmcia/axnet_cs.c | 13 +-- drivers/net/pcmcia/com20020_cs.c | 8 +- drivers/net/pcmcia/fmvj18x_cs.c | 10 +- drivers/net/pcmcia/ibmtr_cs.c | 8 +- drivers/net/pcmcia/nmclan_cs.c | 6 +- drivers/net/pcmcia/pcnet_cs.c | 8 +- drivers/net/pcmcia/smc91c92_cs.c | 8 +- drivers/net/pcmcia/xirc2ps_cs.c | 7 +- drivers/net/wireless/airo_cs.c | 25 +---- drivers/net/wireless/atmel_cs.c | 28 +---- drivers/net/wireless/b43/pcmcia.c | 5 +- drivers/net/wireless/hostap/hostap_cs.c | 29 +---- drivers/net/wireless/libertas/if_cs.c | 21 +--- drivers/net/wireless/orinoco/orinoco_cs.c | 13 +-- drivers/net/wireless/orinoco/spectrum_cs.c | 13 +-- drivers/net/wireless/ray_cs.c | 8 +- drivers/net/wireless/wl3501_cs.c | 8 +- drivers/parport/parport_cs.c | 8 +- drivers/pcmcia/ds.c | 3 +- drivers/pcmcia/pcmcia_resource.c | 137 +++++++++-------------- drivers/scsi/pcmcia/aha152x_stub.c | 6 +- drivers/scsi/pcmcia/fdomain_stub.c | 6 +- drivers/scsi/pcmcia/nsp_cs.c | 20 +--- drivers/scsi/pcmcia/qlogic_stub.c | 10 +- drivers/scsi/pcmcia/sym53c500_cs.c | 6 +- drivers/serial/serial_cs.c | 27 ++--- drivers/ssb/main.c | 2 +- drivers/staging/comedi/drivers/cb_das16_cs.c | 26 ++--- drivers/staging/comedi/drivers/das08_cs.c | 16 +-- drivers/staging/comedi/drivers/ni_daq_700.c | 23 +--- drivers/staging/comedi/drivers/ni_daq_dio24.c | 23 +--- drivers/staging/comedi/drivers/ni_labpc_cs.c | 24 +--- drivers/staging/comedi/drivers/ni_mio_cs.c | 9 +- drivers/staging/comedi/drivers/quatech_daqp_cs.c | 22 +--- drivers/staging/netwave/netwave_cs.c | 8 +- drivers/staging/wavelan/wavelan_cs.c | 15 +-- drivers/staging/wlags49_h2/wl_cs.c | 9 +- drivers/usb/host/sl811_cs.c | 18 +-- include/pcmcia/cs.h | 7 -- include/pcmcia/ds.h | 11 +- sound/pcmcia/pdaudiocf/pdaudiocf.c | 9 +- sound/pcmcia/vx/vxpocket.c | 8 +- 58 files changed, 244 insertions(+), 593 deletions(-) diff --git a/Documentation/pcmcia/driver-changes.txt b/Documentation/pcmcia/driver-changes.txt index 446f43b309df..3268a9ae7271 100644 --- a/Documentation/pcmcia/driver-changes.txt +++ b/Documentation/pcmcia/driver-changes.txt @@ -1,4 +1,14 @@ This file details changes in 2.6 which affect PCMCIA card driver authors: +* New IRQ request rules (as of 2.6.35) + Instead of the old pcmcia_request_irq() interface, drivers may now + choose between: + - calling request_irq/free_irq directly. Use the IRQ from *p_dev->irq. + - use pcmcia_request_irq(p_dev, handler_t); the PCMCIA core will + clean up automatically on calls to pcmcia_disable_device() or + device ejection. + - drivers still not capable of IRQF_SHARED (or not telling us so) may + use the deprecated pcmcia_request_exclusive_irq() for the time + being; they might receive a shared IRQ nonetheless. * no cs_error / CS_CHECK / CONFIG_PCMCIA_DEBUG (as of 2.6.33) Instead of the cs_error() callback or the CS_CHECK() macro, please use diff --git a/drivers/ata/pata_pcmcia.c b/drivers/ata/pata_pcmcia.c index d94b8f0bd743..2aab1e0f6633 100644 --- a/drivers/ata/pata_pcmcia.c +++ b/drivers/ata/pata_pcmcia.c @@ -268,7 +268,6 @@ static int pcmcia_init_one(struct pcmcia_device *pdev) pdev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; pdev->io.Attributes2 = IO_DATA_PATH_WIDTH_8; pdev->io.IOAddrLines = 3; - pdev->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING; pdev->conf.Attributes = CONF_ENABLE_IRQ; pdev->conf.IntType = INT_MEMORY_AND_IO; @@ -293,8 +292,7 @@ static int pcmcia_init_one(struct pcmcia_device *pdev) } io_base = pdev->io.BasePort1; ctl_base = stk->ctl_base; - ret = pcmcia_request_irq(pdev, &pdev->irq); - if (ret) + if (!pdev->irq) goto failed; ret = pcmcia_request_configuration(pdev, &pdev->conf); @@ -344,7 +342,7 @@ static int pcmcia_init_one(struct pcmcia_device *pdev) } /* activate */ - ret = ata_host_activate(host, pdev->irq.AssignedIRQ, ata_sff_interrupt, + ret = ata_host_activate(host, pdev->irq, ata_sff_interrupt, IRQF_SHARED, &pcmcia_sht); if (ret) goto failed; diff --git a/drivers/bluetooth/bluecard_cs.c b/drivers/bluetooth/bluecard_cs.c index d9bf87ca9e83..a34653db07bc 100644 --- a/drivers/bluetooth/bluecard_cs.c +++ b/drivers/bluetooth/bluecard_cs.c @@ -869,9 +869,6 @@ static int bluecard_probe(struct pcmcia_device *link) link->io.Attributes1 = IO_DATA_PATH_WIDTH_8; link->io.NumPorts1 = 8; - link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING; - - link->irq.Handler = bluecard_interrupt; link->conf.Attributes = CONF_ENABLE_IRQ; link->conf.IntType = INT_MEMORY_AND_IO; @@ -908,9 +905,9 @@ static int bluecard_config(struct pcmcia_device *link) if (i != 0) goto failed; - i = pcmcia_request_irq(link, &link->irq); + i = pcmcia_request_irq(link, bluecard_interrupt); if (i != 0) - link->irq.AssignedIRQ = 0; + goto failed; i = pcmcia_request_configuration(link, &link->conf); if (i != 0) diff --git a/drivers/bluetooth/bt3c_cs.c b/drivers/bluetooth/bt3c_cs.c index 027cb8bf650f..1ad9694d4450 100644 --- a/drivers/bluetooth/bt3c_cs.c +++ b/drivers/bluetooth/bt3c_cs.c @@ -661,9 +661,6 @@ static int bt3c_probe(struct pcmcia_device *link) link->io.Attributes1 = IO_DATA_PATH_WIDTH_8; link->io.NumPorts1 = 8; - link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING; - - link->irq.Handler = bt3c_interrupt; link->conf.Attributes = CONF_ENABLE_IRQ; link->conf.IntType = INT_MEMORY_AND_IO; @@ -743,9 +740,9 @@ static int bt3c_config(struct pcmcia_device *link) goto failed; found_port: - i = pcmcia_request_irq(link, &link->irq); + i = pcmcia_request_irq(link, &bt3c_interrupt); if (i != 0) - link->irq.AssignedIRQ = 0; + goto failed; i = pcmcia_request_configuration(link, &link->conf); if (i != 0) diff --git a/drivers/bluetooth/btuart_cs.c b/drivers/bluetooth/btuart_cs.c index 60c0953d7d00..1073d660d625 100644 --- a/drivers/bluetooth/btuart_cs.c +++ b/drivers/bluetooth/btuart_cs.c @@ -590,9 +590,6 @@ static int btuart_probe(struct pcmcia_device *link) link->io.Attributes1 = IO_DATA_PATH_WIDTH_8; link->io.NumPorts1 = 8; - link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING; - - link->irq.Handler = btuart_interrupt; link->conf.Attributes = CONF_ENABLE_IRQ; link->conf.IntType = INT_MEMORY_AND_IO; @@ -672,9 +669,9 @@ static int btuart_config(struct pcmcia_device *link) goto failed; found_port: - i = pcmcia_request_irq(link, &link->irq); + i = pcmcia_request_irq(link, btuart_interrupt); if (i != 0) - link->irq.AssignedIRQ = 0; + goto failed; i = pcmcia_request_configuration(link, &link->conf); if (i != 0) diff --git a/drivers/bluetooth/dtl1_cs.c b/drivers/bluetooth/dtl1_cs.c index 17788317c51a..3d72afddabb3 100644 --- a/drivers/bluetooth/dtl1_cs.c +++ b/drivers/bluetooth/dtl1_cs.c @@ -575,9 +575,6 @@ static int dtl1_probe(struct pcmcia_device *link) link->io.Attributes1 = IO_DATA_PATH_WIDTH_8; link->io.NumPorts1 = 8; - link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING; - - link->irq.Handler = dtl1_interrupt; link->conf.Attributes = CONF_ENABLE_IRQ; link->conf.IntType = INT_MEMORY_AND_IO; @@ -621,9 +618,9 @@ static int dtl1_config(struct pcmcia_device *link) if (pcmcia_loop_config(link, dtl1_confcheck, NULL) < 0) goto failed; - i = pcmcia_request_irq(link, &link->irq); + i = pcmcia_request_irq(link, dtl1_interrupt); if (i != 0) - link->irq.AssignedIRQ = 0; + goto failed; i = pcmcia_request_configuration(link, &link->conf); if (i != 0) diff --git a/drivers/char/pcmcia/ipwireless/main.c b/drivers/char/pcmcia/ipwireless/main.c index dff24dae1485..2237890bc256 100644 --- a/drivers/char/pcmcia/ipwireless/main.c +++ b/drivers/char/pcmcia/ipwireless/main.c @@ -195,9 +195,6 @@ static int config_ipwireless(struct ipw_dev *ipw) link->conf.Attributes = CONF_ENABLE_IRQ; link->conf.IntType = INT_MEMORY_AND_IO; - link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING; - link->irq.Handler = ipwireless_interrupt; - INIT_WORK(&ipw->work_reboot, signalled_reboot_work); ipwireless_init_hardware_v1(ipw->hardware, link->io.BasePort1, @@ -205,8 +202,7 @@ static int config_ipwireless(struct ipw_dev *ipw) ipw->is_v2_card, signalled_reboot_callback, ipw); - ret = pcmcia_request_irq(link, &link->irq); - + ret = pcmcia_request_irq(link, ipwireless_interrupt); if (ret != 0) goto exit; @@ -217,7 +213,7 @@ static int config_ipwireless(struct ipw_dev *ipw) (unsigned int) link->io.BasePort1, (unsigned int) (link->io.BasePort1 + link->io.NumPorts1 - 1), - (unsigned int) link->irq.AssignedIRQ); + (unsigned int) link->irq); if (ipw->attr_memory && ipw->common_memory) printk(KERN_INFO IPWIRELESS_PCCARD_NAME ": attr memory 0x%08lx-0x%08lx, common memory 0x%08lx-0x%08lx\n", @@ -271,8 +267,6 @@ exit: static void release_ipwireless(struct ipw_dev *ipw) { - pcmcia_disable_device(ipw->link); - if (ipw->common_memory) { release_mem_region(ipw->request_common_memory.Base, ipw->request_common_memory.Size); @@ -288,7 +282,6 @@ static void release_ipwireless(struct ipw_dev *ipw) if (ipw->attr_memory) pcmcia_release_window(ipw->link, ipw->handle_attr_memory); - /* Break the link with Card Services */ pcmcia_disable_device(ipw->link); } diff --git a/drivers/char/pcmcia/synclink_cs.c b/drivers/char/pcmcia/synclink_cs.c index c31a0d913d37..027690b70d2c 100644 --- a/drivers/char/pcmcia/synclink_cs.c +++ b/drivers/char/pcmcia/synclink_cs.c @@ -552,10 +552,6 @@ static int mgslpc_probe(struct pcmcia_device *link) /* Initialize the struct pcmcia_device structure */ - /* Interrupt setup */ - link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING; - link->irq.Handler = NULL; - link->conf.Attributes = 0; link->conf.IntType = INT_MEMORY_AND_IO; @@ -608,9 +604,7 @@ static int mgslpc_config(struct pcmcia_device *link) link->conf.ConfigIndex = 8; link->conf.Present = PRESENT_OPTION; - link->irq.Handler = mgslpc_isr; - - ret = pcmcia_request_irq(link, &link->irq); + ret = pcmcia_request_irq(link, mgslpc_isr); if (ret) goto failed; ret = pcmcia_request_configuration(link, &link->conf); @@ -618,7 +612,7 @@ static int mgslpc_config(struct pcmcia_device *link) goto failed; info->io_base = link->io.BasePort1; - info->irq_level = link->irq.AssignedIRQ; + info->irq_level = link->irq; /* add to linked list of devices */ sprintf(info->node.dev_name, "mgslpc0"); @@ -628,7 +622,7 @@ static int mgslpc_config(struct pcmcia_device *link) printk(KERN_INFO "%s: index 0x%02x:", info->node.dev_name, link->conf.ConfigIndex); if (link->conf.Attributes & CONF_ENABLE_IRQ) - printk(", irq %d", link->irq.AssignedIRQ); + printk(", irq %d", link->irq); if (link->io.NumPorts1) printk(", io 0x%04x-0x%04x", link->io.BasePort1, link->io.BasePort1+link->io.NumPorts1-1); diff --git a/drivers/ide/ide-cs.c b/drivers/ide/ide-cs.c index b85450865ff0..17ad91e453e4 100644 --- a/drivers/ide/ide-cs.c +++ b/drivers/ide/ide-cs.c @@ -102,7 +102,6 @@ static int ide_probe(struct pcmcia_device *link) link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; link->io.Attributes2 = IO_DATA_PATH_WIDTH_8; link->io.IOAddrLines = 3; - link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING; link->conf.Attributes = CONF_ENABLE_IRQ; link->conf.IntType = INT_MEMORY_AND_IO; @@ -285,8 +284,7 @@ static int ide_config(struct pcmcia_device *link) io_base = link->io.BasePort1; ctl_base = stk->ctl_base; - ret = pcmcia_request_irq(link, &link->irq); - if (ret) + if (!link->irq) goto failed; ret = pcmcia_request_configuration(link, &link->conf); if (ret) @@ -299,11 +297,11 @@ static int ide_config(struct pcmcia_device *link) if (is_kme) outb(0x81, ctl_base+1); - host = idecs_register(io_base, ctl_base, link->irq.AssignedIRQ, link); + host = idecs_register(io_base, ctl_base, link->irq, link); if (host == NULL && link->io.NumPorts1 == 0x20) { outb(0x02, ctl_base + 0x10); host = idecs_register(io_base + 0x10, ctl_base + 0x10, - link->irq.AssignedIRQ, link); + link->irq, link); } if (host == NULL) diff --git a/drivers/isdn/hardware/avm/avm_cs.c b/drivers/isdn/hardware/avm/avm_cs.c index 94b796d84053..0d485f6c2194 100644 --- a/drivers/isdn/hardware/avm/avm_cs.c +++ b/drivers/isdn/hardware/avm/avm_cs.c @@ -107,9 +107,6 @@ static int avmcs_probe(struct pcmcia_device *p_dev) p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8; p_dev->io.NumPorts2 = 0; - /* Interrupt setup */ - p_dev->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING; - /* General socket configuration */ p_dev->conf.Attributes = CONF_ENABLE_IRQ; p_dev->conf.IntType = INT_MEMORY_AND_IO; @@ -172,7 +169,7 @@ static int avmcs_configcheck(struct pcmcia_device *p_dev, static int avmcs_config(struct pcmcia_device *link) { local_info_t *dev; - int i; + int i = -1; char devname[128]; int cardtype; int (*addcard)(unsigned int port, unsigned irq); @@ -190,11 +187,7 @@ static int avmcs_config(struct pcmcia_device *link) return -ENODEV; do { - /* - * allocate an interrupt line - */ - i = pcmcia_request_irq(link, &link->irq); - if (i != 0) { + if (!link->irq) { /* undo */ pcmcia_disable_device(link); break; @@ -249,9 +242,9 @@ static int avmcs_config(struct pcmcia_device *link) default: case AVM_CARDTYPE_B1: addcard = b1pcmcia_addcard_b1; break; } - if ((i = (*addcard)(link->io.BasePort1, link->irq.AssignedIRQ)) < 0) { + if ((i = (*addcard)(link->io.BasePort1, link->irq)) < 0) { printk(KERN_ERR "avm_cs: failed to add AVM-%s-Controller at i/o %#x, irq %d\n", - dev->node.dev_name, link->io.BasePort1, link->irq.AssignedIRQ); + dev->node.dev_name, link->io.BasePort1, link->irq); avmcs_release(link); return -ENODEV; } @@ -270,7 +263,7 @@ static int avmcs_config(struct pcmcia_device *link) static void avmcs_release(struct pcmcia_device *link) { - b1pcmcia_delcard(link->io.BasePort1, link->irq.AssignedIRQ); + b1pcmcia_delcard(link->io.BasePort1, link->irq); pcmcia_disable_device(link); } /* avmcs_release */ diff --git a/drivers/isdn/hisax/avma1_cs.c b/drivers/isdn/hisax/avma1_cs.c index 8d1d63a02b34..3ae2176c6f75 100644 --- a/drivers/isdn/hisax/avma1_cs.c +++ b/drivers/isdn/hisax/avma1_cs.c @@ -119,9 +119,6 @@ static int __devinit avma1cs_probe(struct pcmcia_device *p_dev) p_dev->io.Attributes2 = IO_DATA_PATH_WIDTH_16; p_dev->io.IOAddrLines = 5; - /* Interrupt setup */ - p_dev->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING; - /* General socket configuration */ p_dev->conf.Attributes = CONF_ENABLE_IRQ; p_dev->conf.IntType = INT_MEMORY_AND_IO; @@ -177,7 +174,7 @@ static int avma1cs_configcheck(struct pcmcia_device *p_dev, static int __devinit avma1cs_config(struct pcmcia_device *link) { local_info_t *dev; - int i; + int i = -1; char devname[128]; IsdnCard_t icard; int busy = 0; @@ -197,8 +194,7 @@ static int __devinit avma1cs_config(struct pcmcia_device *link) /* * allocate an interrupt line */ - i = pcmcia_request_irq(link, &link->irq); - if (i != 0) { + if (!link->irq) { /* undo */ pcmcia_disable_device(link); break; @@ -230,9 +226,9 @@ static int __devinit avma1cs_config(struct pcmcia_device *link) } printk(KERN_NOTICE "avma1_cs: checking at i/o %#x, irq %d\n", - link->io.BasePort1, link->irq.AssignedIRQ); + link->io.BasePort1, link->irq); - icard.para[0] = link->irq.AssignedIRQ; + icard.para[0] = link->irq; icard.para[1] = link->io.BasePort1; icard.protocol = isdnprot; icard.typ = ISDN_CTYPE_A1_PCMCIA; diff --git a/drivers/isdn/hisax/elsa_cs.c b/drivers/isdn/hisax/elsa_cs.c index c9f2279e21f5..8e170e4b7cf2 100644 --- a/drivers/isdn/hisax/elsa_cs.c +++ b/drivers/isdn/hisax/elsa_cs.c @@ -136,10 +136,6 @@ static int __devinit elsa_cs_probe(struct pcmcia_device *link) local->cardnr = -1; - /* Interrupt setup */ - link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING; - link->irq.Handler = NULL; - /* General socket configuration defaults can go here. In this client, we assume very little, and rely on the CIS for almost @@ -223,11 +219,8 @@ static int __devinit elsa_cs_config(struct pcmcia_device *link) if (i != 0) goto failed; - i = pcmcia_request_irq(link, &link->irq); - if (i != 0) { - link->irq.AssignedIRQ = 0; + if (!link->irq) goto failed; - } i = pcmcia_request_configuration(link, &link->conf); if (i != 0) @@ -244,7 +237,7 @@ static int __devinit elsa_cs_config(struct pcmcia_device *link) printk(KERN_INFO "%s: index 0x%02x: ", dev->node.dev_name, link->conf.ConfigIndex); if (link->conf.Attributes & CONF_ENABLE_IRQ) - printk(", irq %d", link->irq.AssignedIRQ); + printk(", irq %d", link->irq); if (link->io.NumPorts1) printk(", io 0x%04x-0x%04x", link->io.BasePort1, link->io.BasePort1+link->io.NumPorts1-1); @@ -253,7 +246,7 @@ static int __devinit elsa_cs_config(struct pcmcia_device *link) link->io.BasePort2+link->io.NumPorts2-1); printk("\n"); - icard.para[0] = link->irq.AssignedIRQ; + icard.para[0] = link->irq; icard.para[1] = link->io.BasePort1; icard.protocol = protocol; icard.typ = ISDN_CTYPE_ELSA_PCMCIA; diff --git a/drivers/isdn/hisax/sedlbauer_cs.c b/drivers/isdn/hisax/sedlbauer_cs.c index 71b3ddef03bb..7778385b05b2 100644 --- a/drivers/isdn/hisax/sedlbauer_cs.c +++ b/drivers/isdn/hisax/sedlbauer_cs.c @@ -143,10 +143,6 @@ static int __devinit sedlbauer_probe(struct pcmcia_device *link) local->p_dev = link; link->priv = local; - /* Interrupt setup */ - link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING; - link->irq.Handler = NULL; - /* General socket configuration defaults can go here. In this client, we assume very little, and rely on the CIS for almost @@ -227,9 +223,7 @@ static int sedlbauer_config_check(struct pcmcia_device *p_dev, else if (dflt->vpp1.present & (1<conf.Vpp = dflt->vpp1.param[CISTPL_POWER_VNOM]/10000; - /* Do we need to allocate an interrupt? */ - if (cfg->irq.IRQInfo1 || dflt->irq.IRQInfo1) - p_dev->conf.Attributes |= CONF_ENABLE_IRQ; + p_dev->conf.Attributes |= CONF_ENABLE_IRQ; /* IO window settings */ p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0; @@ -312,17 +306,6 @@ static int __devinit sedlbauer_config(struct pcmcia_device *link) if (ret) goto failed; - /* - Allocate an interrupt line. Note that this does not assign a - handler to the interrupt, unless the 'Handler' member of the - irq structure is initialized. - */ - if (link->conf.Attributes & CONF_ENABLE_IRQ) { - ret = pcmcia_request_irq(link, &link->irq); - if (ret) - goto failed; - } - /* This actually configures the PCMCIA socket -- setting up the I/O windows and the interrupt mapping, and putting the @@ -346,7 +329,7 @@ static int __devinit sedlbauer_config(struct pcmcia_device *link) if (link->conf.Vpp) printk(", Vpp %d.%d", link->conf.Vpp/10, link->conf.Vpp%10); if (link->conf.Attributes & CONF_ENABLE_IRQ) - printk(", irq %d", link->irq.AssignedIRQ); + printk(", irq %d", link->irq); if (link->io.NumPorts1) printk(", io 0x%04x-0x%04x", link->io.BasePort1, link->io.BasePort1+link->io.NumPorts1-1); @@ -358,7 +341,7 @@ static int __devinit sedlbauer_config(struct pcmcia_device *link) req->Base+req->Size-1); printk("\n"); - icard.para[0] = link->irq.AssignedIRQ; + icard.para[0] = link->irq; icard.para[1] = link->io.BasePort1; icard.protocol = protocol; icard.typ = ISDN_CTYPE_SEDLBAUER_PCMCIA; diff --git a/drivers/isdn/hisax/teles_cs.c b/drivers/isdn/hisax/teles_cs.c index d010a0da8e19..02dec13f25e5 100644 --- a/drivers/isdn/hisax/teles_cs.c +++ b/drivers/isdn/hisax/teles_cs.c @@ -126,10 +126,6 @@ static int __devinit teles_probe(struct pcmcia_device *link) local->p_dev = link; link->priv = local; - /* Interrupt setup */ - link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING; - link->irq.Handler = NULL; - /* General socket configuration defaults can go here. In this client, we assume very little, and rely on the CIS for almost @@ -213,11 +209,8 @@ static int __devinit teles_cs_config(struct pcmcia_device *link) if (i != 0) goto cs_failed; - i = pcmcia_request_irq(link, &link->irq); - if (i != 0) { - link->irq.AssignedIRQ = 0; + if (!link->irq) goto cs_failed; - } i = pcmcia_request_configuration(link, &link->conf); if (i != 0) @@ -234,7 +227,7 @@ static int __devinit teles_cs_config(struct pcmcia_device *link) printk(KERN_INFO "%s: index 0x%02x:", dev->node.dev_name, link->conf.ConfigIndex); if (link->conf.Attributes & CONF_ENABLE_IRQ) - printk(", irq %d", link->irq.AssignedIRQ); + printk(", irq %d", link->irq); if (link->io.NumPorts1) printk(", io 0x%04x-0x%04x", link->io.BasePort1, link->io.BasePort1+link->io.NumPorts1-1); @@ -243,7 +236,7 @@ static int __devinit teles_cs_config(struct pcmcia_device *link) link->io.BasePort2+link->io.NumPorts2-1); printk("\n"); - icard.para[0] = link->irq.AssignedIRQ; + icard.para[0] = link->irq; icard.para[1] = link->io.BasePort1; icard.protocol = protocol; icard.typ = ISDN_CTYPE_TELESPCMCIA; diff --git a/drivers/net/pcmcia/3c574_cs.c b/drivers/net/pcmcia/3c574_cs.c index 757f87bb1db3..14428317c009 100644 --- a/drivers/net/pcmcia/3c574_cs.c +++ b/drivers/net/pcmcia/3c574_cs.c @@ -283,8 +283,6 @@ static int tc574_probe(struct pcmcia_device *link) spin_lock_init(&lp->window_lock); link->io.NumPorts1 = 32; link->io.Attributes1 = IO_DATA_PATH_WIDTH_16; - link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING; - link->irq.Handler = &el3_interrupt; link->conf.Attributes = CONF_ENABLE_IRQ; link->conf.IntType = INT_MEMORY_AND_IO; link->conf.ConfigIndex = 1; @@ -353,7 +351,7 @@ static int tc574_config(struct pcmcia_device *link) if (i != 0) goto failed; - ret = pcmcia_request_irq(link, &link->irq); + ret = pcmcia_request_irq(link, el3_interrupt); if (ret) goto failed; @@ -361,7 +359,7 @@ static int tc574_config(struct pcmcia_device *link) if (ret) goto failed; - dev->irq = link->irq.AssignedIRQ; + dev->irq = link->irq; dev->base_addr = link->io.BasePort1; ioaddr = dev->base_addr; diff --git a/drivers/net/pcmcia/3c589_cs.c b/drivers/net/pcmcia/3c589_cs.c index 091e0b00043e..405d772bfde7 100644 --- a/drivers/net/pcmcia/3c589_cs.c +++ b/drivers/net/pcmcia/3c589_cs.c @@ -194,8 +194,7 @@ static int tc589_probe(struct pcmcia_device *link) spin_lock_init(&lp->lock); link->io.NumPorts1 = 16; link->io.Attributes1 = IO_DATA_PATH_WIDTH_16; - link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING; - link->irq.Handler = &el3_interrupt; + link->conf.Attributes = CONF_ENABLE_IRQ; link->conf.IntType = INT_MEMORY_AND_IO; link->conf.ConfigIndex = 1; @@ -271,7 +270,7 @@ static int tc589_config(struct pcmcia_device *link) if (i != 0) goto failed; - ret = pcmcia_request_irq(link, &link->irq); + ret = pcmcia_request_irq(link, el3_interrupt); if (ret) goto failed; @@ -279,7 +278,7 @@ static int tc589_config(struct pcmcia_device *link) if (ret) goto failed; - dev->irq = link->irq.AssignedIRQ; + dev->irq = link->irq; dev->base_addr = link->io.BasePort1; ioaddr = dev->base_addr; EL3WINDOW(0); diff --git a/drivers/net/pcmcia/axnet_cs.c b/drivers/net/pcmcia/axnet_cs.c index 9f3d593f14ed..967547a84b4b 100644 --- a/drivers/net/pcmcia/axnet_cs.c +++ b/drivers/net/pcmcia/axnet_cs.c @@ -168,7 +168,6 @@ static int axnet_probe(struct pcmcia_device *link) info = PRIV(dev); info->p_dev = link; link->priv = dev; - link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING; link->conf.Attributes = CONF_ENABLE_IRQ; link->conf.IntType = INT_MEMORY_AND_IO; @@ -265,12 +264,9 @@ static int try_io_port(struct pcmcia_device *link) int j, ret; if (link->io.NumPorts1 == 32) { link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; - if (link->io.NumPorts2 > 0) { - /* for master/slave multifunction cards */ + /* for master/slave multifunction cards */ + if (link->io.NumPorts2 > 0) link->io.Attributes2 = IO_DATA_PATH_WIDTH_8; - link->irq.Attributes = - IRQ_TYPE_DYNAMIC_SHARING; - } } else { /* This should be two 16-port windows */ link->io.Attributes1 = IO_DATA_PATH_WIDTH_8; @@ -336,8 +332,7 @@ static int axnet_config(struct pcmcia_device *link) if (ret != 0) goto failed; - ret = pcmcia_request_irq(link, &link->irq); - if (ret) + if (!link->irq) goto failed; if (link->io.NumPorts2 == 8) { @@ -349,7 +344,7 @@ static int axnet_config(struct pcmcia_device *link) if (ret) goto failed; - dev->irq = link->irq.AssignedIRQ; + dev->irq = link->irq; dev->base_addr = link->io.BasePort1; if (!get_prom(link)) { diff --git a/drivers/net/pcmcia/com20020_cs.c b/drivers/net/pcmcia/com20020_cs.c index 21d9c9d815d1..278438beb915 100644 --- a/drivers/net/pcmcia/com20020_cs.c +++ b/drivers/net/pcmcia/com20020_cs.c @@ -163,7 +163,6 @@ static int com20020_probe(struct pcmcia_device *p_dev) p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8; p_dev->io.NumPorts1 = 16; p_dev->io.IOAddrLines = 16; - p_dev->irq.Attributes = IRQ_TYPE_EXCLUSIVE; p_dev->conf.Attributes = CONF_ENABLE_IRQ; p_dev->conf.IntType = INT_MEMORY_AND_IO; @@ -275,15 +274,14 @@ static int com20020_config(struct pcmcia_device *link) dev_dbg(&link->dev, "got ioaddr %Xh\n", ioaddr); dev_dbg(&link->dev, "request IRQ %d\n", - link->irq.AssignedIRQ); - i = pcmcia_request_irq(link, &link->irq); - if (i != 0) + link->irq); + if (!link->irq) { dev_dbg(&link->dev, "requestIRQ failed totally!\n"); goto failed; } - dev->irq = link->irq.AssignedIRQ; + dev->irq = link->irq; ret = pcmcia_request_configuration(link, &link->conf); if (ret) diff --git a/drivers/net/pcmcia/fmvj18x_cs.c b/drivers/net/pcmcia/fmvj18x_cs.c index b9dc80b9d04a..31f1a037737c 100644 --- a/drivers/net/pcmcia/fmvj18x_cs.c +++ b/drivers/net/pcmcia/fmvj18x_cs.c @@ -254,10 +254,6 @@ static int fmvj18x_probe(struct pcmcia_device *link) link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; link->io.IOAddrLines = 5; - /* Interrupt setup */ - link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING; - link->irq.Handler = fjn_interrupt; - /* General socket configuration */ link->conf.Attributes = CONF_ENABLE_IRQ; link->conf.IntType = INT_MEMORY_AND_IO; @@ -425,8 +421,6 @@ static int fmvj18x_config(struct pcmcia_device *link) } if (link->io.NumPorts2 != 0) { - link->irq.Attributes = - IRQ_TYPE_DYNAMIC_SHARING; ret = mfc_try_io_port(link); if (ret != 0) goto failed; } else if (cardtype == UNGERMANN) { @@ -437,14 +431,14 @@ static int fmvj18x_config(struct pcmcia_device *link) if (ret) goto failed; } - ret = pcmcia_request_irq(link, &link->irq); + ret = pcmcia_request_irq(link, fjn_interrupt); if (ret) goto failed; ret = pcmcia_request_configuration(link, &link->conf); if (ret) goto failed; - dev->irq = link->irq.AssignedIRQ; + dev->irq = link->irq; dev->base_addr = link->io.BasePort1; if (link->io.BasePort2 != 0) { diff --git a/drivers/net/pcmcia/ibmtr_cs.c b/drivers/net/pcmcia/ibmtr_cs.c index 37f4a6fdc3ef..0225cdffa4b9 100644 --- a/drivers/net/pcmcia/ibmtr_cs.c +++ b/drivers/net/pcmcia/ibmtr_cs.c @@ -156,8 +156,6 @@ static int __devinit ibmtr_attach(struct pcmcia_device *link) link->io.Attributes1 = IO_DATA_PATH_WIDTH_8; link->io.NumPorts1 = 4; link->io.IOAddrLines = 16; - link->irq.Attributes = IRQ_TYPE_EXCLUSIVE; - link->irq.Handler = ibmtr_interrupt; link->conf.Attributes = CONF_ENABLE_IRQ; link->conf.IntType = INT_MEMORY_AND_IO; link->conf.Present = PRESENT_OPTION; @@ -238,11 +236,11 @@ static int __devinit ibmtr_config(struct pcmcia_device *link) } dev->base_addr = link->io.BasePort1; - ret = pcmcia_request_irq(link, &link->irq); + ret = pcmcia_request_exclusive_irq(link, ibmtr_interrupt); if (ret) goto failed; - dev->irq = link->irq.AssignedIRQ; - ti->irq = link->irq.AssignedIRQ; + dev->irq = link->irq; + ti->irq = link->irq; ti->global_int_enable=GLOBAL_INT_ENABLE+((dev->irq==9) ? 2 : dev->irq); /* Allocate the MMIO memory window */ diff --git a/drivers/net/pcmcia/nmclan_cs.c b/drivers/net/pcmcia/nmclan_cs.c index c717b143f11a..b779e3a0b4dd 100644 --- a/drivers/net/pcmcia/nmclan_cs.c +++ b/drivers/net/pcmcia/nmclan_cs.c @@ -463,8 +463,6 @@ static int nmclan_probe(struct pcmcia_device *link) link->io.NumPorts1 = 32; link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; link->io.IOAddrLines = 5; - link->irq.Attributes = IRQ_TYPE_EXCLUSIVE; - link->irq.Handler = mace_interrupt; link->conf.Attributes = CONF_ENABLE_IRQ; link->conf.IntType = INT_MEMORY_AND_IO; link->conf.ConfigIndex = 1; @@ -652,14 +650,14 @@ static int nmclan_config(struct pcmcia_device *link) ret = pcmcia_request_io(link, &link->io); if (ret) goto failed; - ret = pcmcia_request_irq(link, &link->irq); + ret = pcmcia_request_exclusive_irq(link, mace_interrupt); if (ret) goto failed; ret = pcmcia_request_configuration(link, &link->conf); if (ret) goto failed; - dev->irq = link->irq.AssignedIRQ; + dev->irq = link->irq; dev->base_addr = link->io.BasePort1; ioaddr = dev->base_addr; diff --git a/drivers/net/pcmcia/pcnet_cs.c b/drivers/net/pcmcia/pcnet_cs.c index 4c0368de1815..af09be487577 100644 --- a/drivers/net/pcmcia/pcnet_cs.c +++ b/drivers/net/pcmcia/pcnet_cs.c @@ -264,7 +264,6 @@ static int pcnet_probe(struct pcmcia_device *link) info->p_dev = link; link->priv = dev; - link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING; link->conf.Attributes = CONF_ENABLE_IRQ; link->conf.IntType = INT_MEMORY_AND_IO; @@ -488,8 +487,6 @@ static int try_io_port(struct pcmcia_device *link) if (link->io.NumPorts2 > 0) { /* for master/slave multifunction cards */ link->io.Attributes2 = IO_DATA_PATH_WIDTH_8; - link->irq.Attributes = - IRQ_TYPE_DYNAMIC_SHARING; } } else { /* This should be two 16-port windows */ @@ -559,8 +556,7 @@ static int pcnet_config(struct pcmcia_device *link) if (ret) goto failed; - ret = pcmcia_request_irq(link, &link->irq); - if (ret) + if (!link->irq) goto failed; if (link->io.NumPorts2 == 8) { @@ -574,7 +570,7 @@ static int pcnet_config(struct pcmcia_device *link) ret = pcmcia_request_configuration(link, &link->conf); if (ret) goto failed; - dev->irq = link->irq.AssignedIRQ; + dev->irq = link->irq; dev->base_addr = link->io.BasePort1; if (info->flags & HAS_MISC_REG) { if ((if_port == 1) || (if_port == 2)) diff --git a/drivers/net/pcmcia/smc91c92_cs.c b/drivers/net/pcmcia/smc91c92_cs.c index ccc553782a0d..ad061c7106b5 100644 --- a/drivers/net/pcmcia/smc91c92_cs.c +++ b/drivers/net/pcmcia/smc91c92_cs.c @@ -329,8 +329,6 @@ static int smc91c92_probe(struct pcmcia_device *link) link->io.NumPorts1 = 16; link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; link->io.IOAddrLines = 4; - link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING; - link->irq.Handler = &smc_interrupt; link->conf.Attributes = CONF_ENABLE_IRQ; link->conf.IntType = INT_MEMORY_AND_IO; @@ -453,7 +451,6 @@ static int mhz_mfc_config(struct pcmcia_device *link) link->conf.Attributes |= CONF_ENABLE_SPKR; link->conf.Status = CCSR_AUDIO_ENA; - link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING; link->io.IOAddrLines = 16; link->io.Attributes2 = IO_DATA_PATH_WIDTH_8; link->io.NumPorts2 = 8; @@ -652,7 +649,6 @@ static int osi_config(struct pcmcia_device *link) link->conf.Attributes |= CONF_ENABLE_SPKR; link->conf.Status = CCSR_AUDIO_ENA; - link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING; link->io.NumPorts1 = 64; link->io.Attributes2 = IO_DATA_PATH_WIDTH_8; link->io.NumPorts2 = 8; @@ -877,7 +873,7 @@ static int smc91c92_config(struct pcmcia_device *link) if (i) goto config_failed; - i = pcmcia_request_irq(link, &link->irq); + i = pcmcia_request_irq(link, smc_interrupt); if (i) goto config_failed; i = pcmcia_request_configuration(link, &link->conf); @@ -887,7 +883,7 @@ static int smc91c92_config(struct pcmcia_device *link) if (smc->manfid == MANFID_MOTOROLA) mot_config(link); - dev->irq = link->irq.AssignedIRQ; + dev->irq = link->irq; if ((if_port >= 0) && (if_port <= 2)) dev->if_port = if_port; diff --git a/drivers/net/pcmcia/xirc2ps_cs.c b/drivers/net/pcmcia/xirc2ps_cs.c index 4d1802e457be..c9e7d7d47835 100644 --- a/drivers/net/pcmcia/xirc2ps_cs.c +++ b/drivers/net/pcmcia/xirc2ps_cs.c @@ -555,7 +555,6 @@ xirc2ps_probe(struct pcmcia_device *link) link->conf.Attributes = CONF_ENABLE_IRQ; link->conf.IntType = INT_MEMORY_AND_IO; link->conf.ConfigIndex = 1; - link->irq.Handler = xirc2ps_interrupt; /* Fill in card specific entries */ dev->netdev_ops = &netdev_ops; @@ -841,7 +840,6 @@ xirc2ps_config(struct pcmcia_device * link) link->conf.Attributes |= CONF_ENABLE_SPKR; link->conf.Status |= CCSR_AUDIO_ENA; } - link->irq.Attributes |= IRQ_TYPE_DYNAMIC_SHARING; link->io.NumPorts2 = 8; link->io.Attributes2 = IO_DATA_PATH_WIDTH_8; if (local->dingo) { @@ -866,7 +864,6 @@ xirc2ps_config(struct pcmcia_device * link) } printk(KNOT_XIRC "no ports available\n"); } else { - link->irq.Attributes |= IRQ_TYPE_DYNAMIC_SHARING; link->io.NumPorts1 = 16; for (ioaddr = 0x300; ioaddr < 0x400; ioaddr += 0x10) { link->io.BasePort1 = ioaddr; @@ -885,7 +882,7 @@ xirc2ps_config(struct pcmcia_device * link) * Now allocate an interrupt line. Note that this does not * actually assign a handler to the interrupt. */ - if ((err=pcmcia_request_irq(link, &link->irq))) + if ((err=pcmcia_request_irq(link, xirc2ps_interrupt))) goto config_error; /**************** @@ -982,7 +979,7 @@ xirc2ps_config(struct pcmcia_device * link) printk(KNOT_XIRC "invalid if_port requested\n"); /* we can now register the device with the net subsystem */ - dev->irq = link->irq.AssignedIRQ; + dev->irq = link->irq; dev->base_addr = link->io.BasePort1; if (local->dingo) diff --git a/drivers/net/wireless/airo_cs.c b/drivers/net/wireless/airo_cs.c index f6036fb42319..7867c51be15f 100644 --- a/drivers/net/wireless/airo_cs.c +++ b/drivers/net/wireless/airo_cs.c @@ -132,10 +132,6 @@ static int airo_probe(struct pcmcia_device *p_dev) dev_dbg(&p_dev->dev, "airo_attach()\n"); - /* Interrupt setup */ - p_dev->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING; - p_dev->irq.Handler = NULL; - /* General socket configuration defaults can go here. In this client, we assume very little, and rely on the CIS for almost @@ -212,9 +208,7 @@ static int airo_cs_config_check(struct pcmcia_device *p_dev, else if (dflt->vpp1.present & (1<conf.Vpp = dflt->vpp1.param[CISTPL_POWER_VNOM]/10000; - /* Do we need to allocate an interrupt? */ - if (cfg->irq.IRQInfo1 || dflt->irq.IRQInfo1) - p_dev->conf.Attributes |= CONF_ENABLE_IRQ; + p_dev->conf.Attributes |= CONF_ENABLE_IRQ; /* IO window settings */ p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0; @@ -300,16 +294,8 @@ static int airo_config(struct pcmcia_device *link) if (ret) goto failed; - /* - Allocate an interrupt line. Note that this does not assign a - handler to the interrupt, unless the 'Handler' member of the - irq structure is initialized. - */ - if (link->conf.Attributes & CONF_ENABLE_IRQ) { - ret = pcmcia_request_irq(link, &link->irq); - if (ret) - goto failed; - } + if (!link->irq) + goto failed; /* This actually configures the PCMCIA socket -- setting up @@ -320,7 +306,7 @@ static int airo_config(struct pcmcia_device *link) if (ret) goto failed; ((local_info_t *)link->priv)->eth_dev = - init_airo_card(link->irq.AssignedIRQ, + init_airo_card(link->irq, link->io.BasePort1, 1, &link->dev); if (!((local_info_t *)link->priv)->eth_dev) goto failed; @@ -338,8 +324,7 @@ static int airo_config(struct pcmcia_device *link) dev->node.dev_name, link->conf.ConfigIndex); if (link->conf.Vpp) printk(", Vpp %d.%d", link->conf.Vpp/10, link->conf.Vpp%10); - if (link->conf.Attributes & CONF_ENABLE_IRQ) - printk(", irq %d", link->irq.AssignedIRQ); + printk(", irq %d", link->irq); if (link->io.NumPorts1) printk(", io 0x%04x-0x%04x", link->io.BasePort1, link->io.BasePort1+link->io.NumPorts1-1); diff --git a/drivers/net/wireless/atmel_cs.c b/drivers/net/wireless/atmel_cs.c index 32407911842f..759cdc419326 100644 --- a/drivers/net/wireless/atmel_cs.c +++ b/drivers/net/wireless/atmel_cs.c @@ -141,10 +141,6 @@ static int atmel_probe(struct pcmcia_device *p_dev) dev_dbg(&p_dev->dev, "atmel_attach()\n"); - /* Interrupt setup */ - p_dev->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING; - p_dev->irq.Handler = NULL; - /* General socket configuration defaults can go here. In this client, we assume very little, and rely on the CIS for almost @@ -226,9 +222,7 @@ static int atmel_config_check(struct pcmcia_device *p_dev, else if (dflt->vpp1.present & (1<conf.Vpp = dflt->vpp1.param[CISTPL_POWER_VNOM]/10000; - /* Do we need to allocate an interrupt? */ - if (cfg->irq.IRQInfo1 || dflt->irq.IRQInfo1) - p_dev->conf.Attributes |= CONF_ENABLE_IRQ; + p_dev->conf.Attributes |= CONF_ENABLE_IRQ; /* IO window settings */ p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0; @@ -278,15 +272,9 @@ static int atmel_config(struct pcmcia_device *link) if (pcmcia_loop_config(link, atmel_config_check, NULL)) goto failed; - /* - Allocate an interrupt line. Note that this does not assign a - handler to the interrupt, unless the 'Handler' member of the - irq structure is initialized. - */ - if (link->conf.Attributes & CONF_ENABLE_IRQ) { - ret = pcmcia_request_irq(link, &link->irq); - if (ret) - goto failed; + if (!link->irq) { + dev_err(&link->dev, "atmel: cannot assign IRQ: check that CONFIG_ISA is set in kernel config."); + goto failed; } /* @@ -298,14 +286,8 @@ static int atmel_config(struct pcmcia_device *link) if (ret) goto failed; - if (link->irq.AssignedIRQ == 0) { - printk(KERN_ALERT - "atmel: cannot assign IRQ: check that CONFIG_ISA is set in kernel config."); - goto failed; - } - ((local_info_t*)link->priv)->eth_dev = - init_atmel_card(link->irq.AssignedIRQ, + init_atmel_card(link->irq, link->io.BasePort1, did ? did->driver_info : ATMEL_FW_TYPE_NONE, &link->dev, diff --git a/drivers/net/wireless/b43/pcmcia.c b/drivers/net/wireless/b43/pcmcia.c index 609e7051e018..0e99b634267c 100644 --- a/drivers/net/wireless/b43/pcmcia.c +++ b/drivers/net/wireless/b43/pcmcia.c @@ -98,10 +98,7 @@ static int __devinit b43_pcmcia_probe(struct pcmcia_device *dev) if (res != 0) goto err_disable; - dev->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING; - dev->irq.Handler = NULL; /* The handler is registered later. */ - res = pcmcia_request_irq(dev, &dev->irq); - if (res != 0) + if (!dev->irq) goto err_disable; res = pcmcia_request_configuration(dev, &dev->conf); diff --git a/drivers/net/wireless/hostap/hostap_cs.c b/drivers/net/wireless/hostap/hostap_cs.c index a36501dbbe02..5e2efbb03675 100644 --- a/drivers/net/wireless/hostap/hostap_cs.c +++ b/drivers/net/wireless/hostap/hostap_cs.c @@ -556,15 +556,7 @@ static int prism2_config_check(struct pcmcia_device *p_dev, p_dev->conf.Vpp = dflt->vpp1.param[CISTPL_POWER_VNOM] / 10000; /* Do we need to allocate an interrupt? */ - if (cfg->irq.IRQInfo1 || dflt->irq.IRQInfo1) - p_dev->conf.Attributes |= CONF_ENABLE_IRQ; - else if (!(p_dev->conf.Attributes & CONF_ENABLE_IRQ)) { - /* At least Compaq WL200 does not have IRQInfo1 set, - * but it does not work without interrupts.. */ - printk(KERN_WARNING "Config has no IRQ info, but trying to " - "enable IRQ anyway..\n"); - p_dev->conf.Attributes |= CONF_ENABLE_IRQ; - } + p_dev->conf.Attributes |= CONF_ENABLE_IRQ; /* IO window settings */ PDEBUG(DEBUG_EXTRA, "IO window settings: cfg->io.nwin=%d " @@ -636,18 +628,9 @@ static int prism2_config(struct pcmcia_device *link) strcpy(hw_priv->node.dev_name, dev->name); link->dev_node = &hw_priv->node; - /* - * Allocate an interrupt line. Note that this does not assign a - * handler to the interrupt, unless the 'Handler' member of the - * irq structure is initialized. - */ - if (link->conf.Attributes & CONF_ENABLE_IRQ) { - link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING; - link->irq.Handler = prism2_interrupt; - ret = pcmcia_request_irq(link, &link->irq); - if (ret) - goto failed; - } + ret = pcmcia_request_irq(link, prism2_interrupt); + if (ret) + goto failed; /* * This actually configures the PCMCIA socket -- setting up @@ -658,7 +641,7 @@ static int prism2_config(struct pcmcia_device *link) if (ret) goto failed; - dev->irq = link->irq.AssignedIRQ; + dev->irq = link->irq; dev->base_addr = link->io.BasePort1; /* Finally, report what we've done */ @@ -668,7 +651,7 @@ static int prism2_config(struct pcmcia_device *link) printk(", Vpp %d.%d", link->conf.Vpp / 10, link->conf.Vpp % 10); if (link->conf.Attributes & CONF_ENABLE_IRQ) - printk(", irq %d", link->irq.AssignedIRQ); + printk(", irq %d", link->irq); if (link->io.NumPorts1) printk(", io 0x%04x-0x%04x", link->io.BasePort1, link->io.BasePort1+link->io.NumPorts1-1); diff --git a/drivers/net/wireless/libertas/if_cs.c b/drivers/net/wireless/libertas/if_cs.c index 6d55439a7b97..08e4e3908003 100644 --- a/drivers/net/wireless/libertas/if_cs.c +++ b/drivers/net/wireless/libertas/if_cs.c @@ -777,7 +777,7 @@ static void if_cs_release(struct pcmcia_device *p_dev) lbs_deb_enter(LBS_DEB_CS); - free_irq(p_dev->irq.AssignedIRQ, card); + free_irq(p_dev->irq, card); pcmcia_disable_device(p_dev); if (card->iobase) ioport_unmap(card->iobase); @@ -807,8 +807,7 @@ static int if_cs_ioprobe(struct pcmcia_device *p_dev, p_dev->io.NumPorts1 = cfg->io.win[0].len; /* Do we need to allocate an interrupt? */ - if (cfg->irq.IRQInfo1) - p_dev->conf.Attributes |= CONF_ENABLE_IRQ; + p_dev->conf.Attributes |= CONF_ENABLE_IRQ; /* IO window settings */ if (cfg->io.nwin != 1) { @@ -837,9 +836,6 @@ static int if_cs_probe(struct pcmcia_device *p_dev) card->p_dev = p_dev; p_dev->priv = card; - p_dev->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING; - p_dev->irq.Handler = NULL; - p_dev->conf.Attributes = 0; p_dev->conf.IntType = INT_MEMORY_AND_IO; @@ -854,13 +850,8 @@ static int if_cs_probe(struct pcmcia_device *p_dev) * a handler to the interrupt, unless the 'Handler' member of * the irq structure is initialized. */ - if (p_dev->conf.Attributes & CONF_ENABLE_IRQ) { - ret = pcmcia_request_irq(p_dev, &p_dev->irq); - if (ret) { - lbs_pr_err("error in pcmcia_request_irq\n"); - goto out1; - } - } + if (!p_dev->irq) + goto out1; /* Initialize io access */ card->iobase = ioport_map(p_dev->io.BasePort1, p_dev->io.NumPorts1); @@ -883,7 +874,7 @@ static int if_cs_probe(struct pcmcia_device *p_dev) /* Finally, report what we've done */ lbs_deb_cs("irq %d, io 0x%04x-0x%04x\n", - p_dev->irq.AssignedIRQ, p_dev->io.BasePort1, + p_dev->irq, p_dev->io.BasePort1, p_dev->io.BasePort1 + p_dev->io.NumPorts1 - 1); /* @@ -940,7 +931,7 @@ static int if_cs_probe(struct pcmcia_device *p_dev) priv->fw_ready = 1; /* Now actually get the IRQ */ - ret = request_irq(p_dev->irq.AssignedIRQ, if_cs_interrupt, + ret = request_irq(p_dev->irq, if_cs_interrupt, IRQF_SHARED, DRV_NAME, card); if (ret) { lbs_pr_err("error in request_irq\n"); diff --git a/drivers/net/wireless/orinoco/orinoco_cs.c b/drivers/net/wireless/orinoco/orinoco_cs.c index 1d4ada188eda..5d29b11fdbc0 100644 --- a/drivers/net/wireless/orinoco/orinoco_cs.c +++ b/drivers/net/wireless/orinoco/orinoco_cs.c @@ -119,10 +119,6 @@ orinoco_cs_probe(struct pcmcia_device *link) card->p_dev = link; link->priv = priv; - /* Interrupt setup */ - link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING; - link->irq.Handler = orinoco_interrupt; - /* General socket configuration defaults can go here. In this * client, we assume very little, and rely on the CIS for * almost everything. In most clients, many details (i.e., @@ -258,12 +254,7 @@ orinoco_cs_config(struct pcmcia_device *link) goto failed; } - /* - * Allocate an interrupt line. Note that this does not assign - * a handler to the interrupt, unless the 'Handler' member of - * the irq structure is initialized. - */ - ret = pcmcia_request_irq(link, &link->irq); + ret = pcmcia_request_irq(link, orinoco_interrupt); if (ret) goto failed; @@ -296,7 +287,7 @@ orinoco_cs_config(struct pcmcia_device *link) /* Register an interface with the stack */ if (orinoco_if_add(priv, link->io.BasePort1, - link->irq.AssignedIRQ) != 0) { + link->irq) != 0) { printk(KERN_ERR PFX "orinoco_if_add() failed\n"); goto failed; } diff --git a/drivers/net/wireless/orinoco/spectrum_cs.c b/drivers/net/wireless/orinoco/spectrum_cs.c index 59bda240fdc2..7a8e056cd62d 100644 --- a/drivers/net/wireless/orinoco/spectrum_cs.c +++ b/drivers/net/wireless/orinoco/spectrum_cs.c @@ -193,10 +193,6 @@ spectrum_cs_probe(struct pcmcia_device *link) card->p_dev = link; link->priv = priv; - /* Interrupt setup */ - link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING; - link->irq.Handler = orinoco_interrupt; - /* General socket configuration defaults can go here. In this * client, we assume very little, and rely on the CIS for * almost everything. In most clients, many details (i.e., @@ -332,12 +328,7 @@ spectrum_cs_config(struct pcmcia_device *link) goto failed; } - /* - * Allocate an interrupt line. Note that this does not assign - * a handler to the interrupt, unless the 'Handler' member of - * the irq structure is initialized. - */ - ret = pcmcia_request_irq(link, &link->irq); + ret = pcmcia_request_irq(link, orinoco_interrupt); if (ret) goto failed; @@ -374,7 +365,7 @@ spectrum_cs_config(struct pcmcia_device *link) /* Register an interface with the stack */ if (orinoco_if_add(priv, link->io.BasePort1, - link->irq.AssignedIRQ) != 0) { + link->irq) != 0) { printk(KERN_ERR PFX "orinoco_if_add() failed\n"); goto failed; } diff --git a/drivers/net/wireless/ray_cs.c b/drivers/net/wireless/ray_cs.c index 11865ea21875..fe4642a49bfb 100644 --- a/drivers/net/wireless/ray_cs.c +++ b/drivers/net/wireless/ray_cs.c @@ -321,10 +321,6 @@ static int ray_probe(struct pcmcia_device *p_dev) p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8; p_dev->io.IOAddrLines = 5; - /* Interrupt setup. For PCMCIA, driver takes what's given */ - p_dev->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING; - p_dev->irq.Handler = &ray_interrupt; - /* General socket configuration */ p_dev->conf.Attributes = CONF_ENABLE_IRQ; p_dev->conf.IntType = INT_MEMORY_AND_IO; @@ -417,10 +413,10 @@ static int ray_config(struct pcmcia_device *link) /* Now allocate an interrupt line. Note that this does not actually assign a handler to the interrupt. */ - ret = pcmcia_request_irq(link, &link->irq); + ret = pcmcia_request_irq(link, ray_interrupt); if (ret) goto failed; - dev->irq = link->irq.AssignedIRQ; + dev->irq = link->irq; /* This actually configures the PCMCIA socket -- setting up the I/O windows and the interrupt mapping. diff --git a/drivers/net/wireless/wl3501_cs.c b/drivers/net/wireless/wl3501_cs.c index 7b9621de239f..c43f05b98c4e 100644 --- a/drivers/net/wireless/wl3501_cs.c +++ b/drivers/net/wireless/wl3501_cs.c @@ -1897,10 +1897,6 @@ static int wl3501_probe(struct pcmcia_device *p_dev) p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8; p_dev->io.IOAddrLines = 5; - /* Interrupt setup */ - p_dev->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING; - p_dev->irq.Handler = wl3501_interrupt; - /* General socket configuration */ p_dev->conf.Attributes = CONF_ENABLE_IRQ; p_dev->conf.IntType = INT_MEMORY_AND_IO; @@ -1961,7 +1957,7 @@ static int wl3501_config(struct pcmcia_device *link) /* Now allocate an interrupt line. Note that this does not actually * assign a handler to the interrupt. */ - ret = pcmcia_request_irq(link, &link->irq); + ret = pcmcia_request_irq(link, wl3501_interrupt); if (ret) goto failed; @@ -1972,7 +1968,7 @@ static int wl3501_config(struct pcmcia_device *link) if (ret) goto failed; - dev->irq = link->irq.AssignedIRQ; + dev->irq = link->irq; dev->base_addr = link->io.BasePort1; SET_NETDEV_DEV(dev, &link->dev); if (register_netdev(dev)) { diff --git a/drivers/parport/parport_cs.c b/drivers/parport/parport_cs.c index 7dd370fa3439..80c9052bf3cd 100644 --- a/drivers/parport/parport_cs.c +++ b/drivers/parport/parport_cs.c @@ -105,7 +105,6 @@ static int parport_probe(struct pcmcia_device *link) link->io.Attributes1 = IO_DATA_PATH_WIDTH_8; link->io.Attributes2 = IO_DATA_PATH_WIDTH_8; - link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING; link->conf.Attributes = CONF_ENABLE_IRQ; link->conf.IntType = INT_MEMORY_AND_IO; @@ -174,20 +173,19 @@ static int parport_config(struct pcmcia_device *link) if (ret) goto failed; - ret = pcmcia_request_irq(link, &link->irq); - if (ret) + if (!link->irq) goto failed; ret = pcmcia_request_configuration(link, &link->conf); if (ret) goto failed; p = parport_pc_probe_port(link->io.BasePort1, link->io.BasePort2, - link->irq.AssignedIRQ, PARPORT_DMA_NONE, + link->irq, PARPORT_DMA_NONE, &link->dev, IRQF_SHARED); if (p == NULL) { printk(KERN_NOTICE "parport_cs: parport_pc_probe_port() at " "0x%3x, irq %u failed\n", link->io.BasePort1, - link->irq.AssignedIRQ); + link->irq); goto failed; } diff --git a/drivers/pcmcia/ds.c b/drivers/pcmcia/ds.c index 5fd2948c7ed9..a2649c7b05bd 100644 --- a/drivers/pcmcia/ds.c +++ b/drivers/pcmcia/ds.c @@ -546,7 +546,6 @@ struct pcmcia_device *pcmcia_device_add(struct pcmcia_socket *s, unsigned int fu p_dev->function_config = tmp_dev->function_config; p_dev->io = tmp_dev->io; p_dev->irq = tmp_dev->irq; - p_dev->irq_v = tmp_dev->irq_v; kref_get(&p_dev->function_config->ref); } @@ -571,7 +570,7 @@ struct pcmcia_device *pcmcia_device_add(struct pcmcia_socket *s, unsigned int fu dev_printk(KERN_NOTICE, &p_dev->dev, "pcmcia: registering new device %s (IRQ: %d)\n", - p_dev->devname, p_dev->irq_v); + p_dev->devname, p_dev->irq); pcmcia_device_query(p_dev); diff --git a/drivers/pcmcia/pcmcia_resource.c b/drivers/pcmcia/pcmcia_resource.c index 8dce223f3f44..f355c5ac407b 100644 --- a/drivers/pcmcia/pcmcia_resource.c +++ b/drivers/pcmcia/pcmcia_resource.c @@ -408,41 +408,6 @@ out: } /* pcmcia_release_io */ -static int pcmcia_release_irq(struct pcmcia_device *p_dev, irq_req_t *req) -{ - struct pcmcia_socket *s = p_dev->socket; - config_t *c; - int ret = -EINVAL; - - mutex_lock(&s->ops_mutex); - - c = p_dev->function_config; - - if (!p_dev->_irq) - goto out; - - p_dev->_irq = 0; - - if (c->state & CONFIG_LOCKED) - goto out; - - if (s->pcmcia_irq != req->AssignedIRQ) { - dev_dbg(&s->dev, "IRQ must match assigned one\n"); - goto out; - } - - if (req->Handler) - free_irq(req->AssignedIRQ, p_dev->priv); - - ret = 0; - -out: - mutex_unlock(&s->ops_mutex); - - return ret; -} /* pcmcia_release_irq */ - - int pcmcia_release_window(struct pcmcia_device *p_dev, window_handle_t wh) { struct pcmcia_socket *s = p_dev->socket; @@ -681,61 +646,66 @@ out: EXPORT_SYMBOL(pcmcia_request_io); -/** pcmcia_request_irq +/** + * pcmcia_request_irq() - attempt to request a IRQ for a PCMCIA device * - * Request_irq() reserves an irq for this client. + * pcmcia_request_irq() is a wrapper around request_irq which will allow + * the PCMCIA core to clean up the registration in pcmcia_disable_device(). + * Drivers are free to use request_irq() directly, but then they need to + * call free_irq themselfves, too. Also, only IRQF_SHARED capable IRQ + * handlers are allowed. */ - -int pcmcia_request_irq(struct pcmcia_device *p_dev, irq_req_t *req) +int __must_check pcmcia_request_irq(struct pcmcia_device *p_dev, + irq_handler_t handler) { - struct pcmcia_socket *s = p_dev->socket; - config_t *c; - int ret = -EINVAL, irq = p_dev->irq_v; - int type = IRQF_SHARED; + int ret; - mutex_lock(&s->ops_mutex); + if (!p_dev->irq) + return -EINVAL; - if (!(s->state & SOCKET_PRESENT)) { - dev_dbg(&s->dev, "No card present\n"); - goto out; - } - c = p_dev->function_config; - if (c->state & CONFIG_LOCKED) { - dev_dbg(&s->dev, "Configuration is locked\n"); - goto out; - } + ret = request_irq(p_dev->irq, handler, IRQF_SHARED, + p_dev->devname, p_dev->priv); + if (!ret) + p_dev->_irq = 1; - if (!irq) { - dev_dbg(&s->dev, "no IRQ available\n"); - goto out; - } + return ret; +} +EXPORT_SYMBOL(pcmcia_request_irq); - if (!(req->Attributes & IRQ_TYPE_DYNAMIC_SHARING)) { - req->Attributes |= IRQ_TYPE_DYNAMIC_SHARING; - dev_printk(KERN_WARNING, &p_dev->dev, "pcmcia: the driver " - "needs updating to supported shared IRQ lines.\n"); - } - if (req->Handler) { - ret = request_irq(irq, req->Handler, type, - p_dev->devname, p_dev->priv); - if (ret) { - dev_printk(KERN_INFO, &s->dev, - "request_irq() failed\n"); - goto out; - } - } +/** + * pcmcia_request_exclusive_irq() - attempt to request an exclusive IRQ first + * + * pcmcia_request_exclusive_irq() is a wrapper around request_irq which + * attempts first to request an exclusive IRQ. If it fails, it also accepts + * a shared IRQ, but prints out a warning. PCMCIA drivers should allow for + * IRQ sharing and either use request_irq directly (then they need to call + * free_irq themselves, too), or the pcmcia_request_irq() function. + */ +int __must_check +pcmcia_request_exclusive_irq(struct pcmcia_device *p_dev, irq_handler_t handler) +{ + int ret; - req->AssignedIRQ = irq; + if (!p_dev->irq) + return -EINVAL; - p_dev->_irq = 1; + ret = request_irq(p_dev->irq, handler, 0, p_dev->devname, p_dev->priv); + if (ret) { + ret = pcmcia_request_irq(p_dev, handler); + dev_printk(KERN_WARNING, &p_dev->dev, "pcmcia: " + "request for exclusive IRQ could not be fulfilled.\n"); + dev_printk(KERN_WARNING, &p_dev->dev, "pcmcia: the driver " + "needs updating to supported shared IRQ lines.\n"); + } + if (ret) + dev_printk(KERN_INFO, &p_dev->dev, "request_irq() failed\n"); + else + p_dev->_irq = 1; - ret = 0; -out: - mutex_unlock(&s->ops_mutex); return ret; -} /* pcmcia_request_irq */ -EXPORT_SYMBOL(pcmcia_request_irq); +} /* pcmcia_request_exclusive_irq */ +EXPORT_SYMBOL(pcmcia_request_exclusive_irq); #ifdef CONFIG_PCMCIA_PROBE @@ -779,7 +749,7 @@ static int pcmcia_setup_isa_irq(struct pcmcia_device *p_dev, int type) p_dev); if (!ret) { free_irq(irq, p_dev); - p_dev->irq_v = s->pcmcia_irq = irq; + p_dev->irq = s->pcmcia_irq = irq; pcmcia_used_irq[irq]++; break; } @@ -820,12 +790,12 @@ int pcmcia_setup_irq(struct pcmcia_device *p_dev) { struct pcmcia_socket *s = p_dev->socket; - if (p_dev->irq_v) + if (p_dev->irq) return 0; /* already assigned? */ if (s->pcmcia_irq) { - p_dev->irq_v = s->pcmcia_irq; + p_dev->irq = s->pcmcia_irq; return 0; } @@ -839,7 +809,7 @@ int pcmcia_setup_irq(struct pcmcia_device *p_dev) /* but use the PCI irq otherwise */ if (s->pci_irq) { - p_dev->irq_v = s->pcmcia_irq = s->pci_irq; + p_dev->irq = s->pcmcia_irq = s->pci_irq; return 0; } @@ -947,7 +917,8 @@ void pcmcia_disable_device(struct pcmcia_device *p_dev) { pcmcia_release_configuration(p_dev); pcmcia_release_io(p_dev, &p_dev->io); - pcmcia_release_irq(p_dev, &p_dev->irq); + if (p_dev->_irq) + free_irq(p_dev->irq, p_dev->priv); if (p_dev->win) pcmcia_release_window(p_dev, p_dev->win); } diff --git a/drivers/scsi/pcmcia/aha152x_stub.c b/drivers/scsi/pcmcia/aha152x_stub.c index 528733b4a392..c1de4ba1f0a5 100644 --- a/drivers/scsi/pcmcia/aha152x_stub.c +++ b/drivers/scsi/pcmcia/aha152x_stub.c @@ -105,7 +105,6 @@ static int aha152x_probe(struct pcmcia_device *link) link->io.NumPorts1 = 0x20; link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; link->io.IOAddrLines = 10; - link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING; link->conf.Attributes = CONF_ENABLE_IRQ; link->conf.IntType = INT_MEMORY_AND_IO; link->conf.Present = PRESENT_OPTION; @@ -160,8 +159,7 @@ static int aha152x_config_cs(struct pcmcia_device *link) if (ret) goto failed; - ret = pcmcia_request_irq(link, &link->irq); - if (ret) + if (!link->irq) goto failed; ret = pcmcia_request_configuration(link, &link->conf); @@ -172,7 +170,7 @@ static int aha152x_config_cs(struct pcmcia_device *link) memset(&s, 0, sizeof(s)); s.conf = "PCMCIA setup"; s.io_port = link->io.BasePort1; - s.irq = link->irq.AssignedIRQ; + s.irq = link->irq; s.scsiid = host_id; s.reconnect = reconnect; s.parity = parity; diff --git a/drivers/scsi/pcmcia/fdomain_stub.c b/drivers/scsi/pcmcia/fdomain_stub.c index 914040684079..8cb6d71f0204 100644 --- a/drivers/scsi/pcmcia/fdomain_stub.c +++ b/drivers/scsi/pcmcia/fdomain_stub.c @@ -88,7 +88,6 @@ static int fdomain_probe(struct pcmcia_device *link) link->io.NumPorts1 = 0x10; link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; link->io.IOAddrLines = 10; - link->irq.Attributes = IRQ_TYPE_EXCLUSIVE; link->conf.Attributes = CONF_ENABLE_IRQ; link->conf.IntType = INT_MEMORY_AND_IO; link->conf.Present = PRESENT_OPTION; @@ -133,8 +132,7 @@ static int fdomain_config(struct pcmcia_device *link) if (ret) goto failed; - ret = pcmcia_request_irq(link, &link->irq); - if (ret) + if (!link->irq) goto failed; ret = pcmcia_request_configuration(link, &link->conf); if (ret) @@ -144,7 +142,7 @@ static int fdomain_config(struct pcmcia_device *link) release_region(link->io.BasePort1, link->io.NumPorts1); /* Set configuration options for the fdomain driver */ - sprintf(str, "%d,%d", link->io.BasePort1, link->irq.AssignedIRQ); + sprintf(str, "%d,%d", link->io.BasePort1, link->irq); fdomain_setup(str); host = __fdomain_16x0_detect(&fdomain_driver_template); diff --git a/drivers/scsi/pcmcia/nsp_cs.c b/drivers/scsi/pcmcia/nsp_cs.c index 021246454872..24c78ed98f07 100644 --- a/drivers/scsi/pcmcia/nsp_cs.c +++ b/drivers/scsi/pcmcia/nsp_cs.c @@ -1563,13 +1563,6 @@ static int nsp_cs_probe(struct pcmcia_device *link) link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; link->io.IOAddrLines = 10; /* not used */ - /* Interrupt setup */ - link->irq.Attributes = IRQ_TYPE_EXCLUSIVE; - - /* Interrupt handler */ - link->irq.Handler = &nspintr; - link->irq.Attributes |= IRQF_SHARED; - /* General socket configuration */ link->conf.Attributes = CONF_ENABLE_IRQ; link->conf.IntType = INT_MEMORY_AND_IO; @@ -1646,8 +1639,7 @@ static int nsp_cs_config_check(struct pcmcia_device *p_dev, } /* Do we need to allocate an interrupt? */ - if (cfg->irq.IRQInfo1 || dflt->irq.IRQInfo1) - p_dev->conf.Attributes |= CONF_ENABLE_IRQ; + p_dev->conf.Attributes |= CONF_ENABLE_IRQ; /* IO window settings */ p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0; @@ -1720,10 +1712,8 @@ static int nsp_cs_config(struct pcmcia_device *link) if (ret) goto cs_failed; - if (link->conf.Attributes & CONF_ENABLE_IRQ) { - if (pcmcia_request_irq(link, &link->irq)) - goto cs_failed; - } + if (pcmcia_request_irq(link, nspintr)) + goto cs_failed; ret = pcmcia_request_configuration(link, &link->conf); if (ret) @@ -1741,7 +1731,7 @@ static int nsp_cs_config(struct pcmcia_device *link) /* Set port and IRQ */ data->BaseAddress = link->io.BasePort1; data->NumAddress = link->io.NumPorts1; - data->IrqNumber = link->irq.AssignedIRQ; + data->IrqNumber = link->irq; nsp_dbg(NSP_DEBUG_INIT, "I/O[0x%x+0x%x] IRQ %d", data->BaseAddress, data->NumAddress, data->IrqNumber); @@ -1775,7 +1765,7 @@ static int nsp_cs_config(struct pcmcia_device *link) printk(", Vpp %d.%d", link->conf.Vpp/10, link->conf.Vpp%10); } if (link->conf.Attributes & CONF_ENABLE_IRQ) { - printk(", irq %d", link->irq.AssignedIRQ); + printk(", irq %d", link->irq); } if (link->io.NumPorts1) { printk(", io 0x%04x-0x%04x", link->io.BasePort1, diff --git a/drivers/scsi/pcmcia/qlogic_stub.c b/drivers/scsi/pcmcia/qlogic_stub.c index f85f094870b4..c3a4428dbcff 100644 --- a/drivers/scsi/pcmcia/qlogic_stub.c +++ b/drivers/scsi/pcmcia/qlogic_stub.c @@ -161,7 +161,6 @@ static int qlogic_probe(struct pcmcia_device *link) link->io.NumPorts1 = 16; link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; link->io.IOAddrLines = 10; - link->irq.Attributes = IRQ_TYPE_EXCLUSIVE; link->conf.Attributes = CONF_ENABLE_IRQ; link->conf.IntType = INT_MEMORY_AND_IO; link->conf.Present = PRESENT_OPTION; @@ -209,8 +208,7 @@ static int qlogic_config(struct pcmcia_device * link) if (ret) goto failed; - ret = pcmcia_request_irq(link, &link->irq); - if (ret) + if (!link->irq) goto failed; ret = pcmcia_request_configuration(link, &link->conf); @@ -227,10 +225,10 @@ static int qlogic_config(struct pcmcia_device * link) /* The KXL-810AN has a bigger IO port window */ if (link->io.NumPorts1 == 32) host = qlogic_detect(&qlogicfas_driver_template, link, - link->io.BasePort1 + 16, link->irq.AssignedIRQ); + link->io.BasePort1 + 16, link->irq); else host = qlogic_detect(&qlogicfas_driver_template, link, - link->io.BasePort1, link->irq.AssignedIRQ); + link->io.BasePort1, link->irq); if (!host) { printk(KERN_INFO "%s: no SCSI devices found\n", qlogic_name); @@ -258,7 +256,7 @@ static void qlogic_release(struct pcmcia_device *link) scsi_remove_host(info->host); - free_irq(link->irq.AssignedIRQ, info->host); + free_irq(link->irq, info->host); pcmcia_disable_device(link); scsi_host_put(info->host); diff --git a/drivers/scsi/pcmcia/sym53c500_cs.c b/drivers/scsi/pcmcia/sym53c500_cs.c index e7564d8f0cbf..6eacf4ca200f 100644 --- a/drivers/scsi/pcmcia/sym53c500_cs.c +++ b/drivers/scsi/pcmcia/sym53c500_cs.c @@ -719,8 +719,7 @@ SYM53C500_config(struct pcmcia_device *link) if (ret) goto failed; - ret = pcmcia_request_irq(link, &link->irq); - if (ret) + if (!link->irq) goto failed; ret = pcmcia_request_configuration(link, &link->conf); @@ -752,7 +751,7 @@ SYM53C500_config(struct pcmcia_device *link) * 0x320, 0x330, 0x340, 0x350 */ port_base = link->io.BasePort1; - irq_level = link->irq.AssignedIRQ; + irq_level = link->irq; DEB(printk("SYM53C500: port_base=0x%x, irq=%d, fast_pio=%d\n", port_base, irq_level, USE_FAST_PIO);) @@ -866,7 +865,6 @@ SYM53C500_probe(struct pcmcia_device *link) link->io.NumPorts1 = 16; link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; link->io.IOAddrLines = 10; - link->irq.Attributes = IRQ_TYPE_EXCLUSIVE; link->conf.Attributes = CONF_ENABLE_IRQ; link->conf.IntType = INT_MEMORY_AND_IO; diff --git a/drivers/serial/serial_cs.c b/drivers/serial/serial_cs.c index 8cfa5b12ea7a..6459252ed371 100644 --- a/drivers/serial/serial_cs.c +++ b/drivers/serial/serial_cs.c @@ -343,7 +343,6 @@ static int serial_probe(struct pcmcia_device *link) link->io.Attributes1 = IO_DATA_PATH_WIDTH_8; link->io.NumPorts1 = 8; - link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING; link->conf.Attributes = CONF_ENABLE_IRQ; if (do_sound) { link->conf.Attributes |= CONF_ENABLE_SPKR; @@ -486,7 +485,7 @@ static int simple_config(struct pcmcia_device *link) } if (info->slave) { return setup_serial(link, info, port, - link->irq.AssignedIRQ); + link->irq); } } @@ -507,10 +506,6 @@ static int simple_config(struct pcmcia_device *link) return -1; found_port: - i = pcmcia_request_irq(link, &link->irq); - if (i != 0) - link->irq.AssignedIRQ = 0; - if (info->multi && (info->manfid == MANFID_3COM)) link->conf.ConfigIndex &= ~(0x08); @@ -523,7 +518,7 @@ found_port: i = pcmcia_request_configuration(link, &link->conf); if (i != 0) return -1; - return setup_serial(link, info, link->io.BasePort1, link->irq.AssignedIRQ); + return setup_serial(link, info, link->io.BasePort1, link->irq); } static int multi_config_check(struct pcmcia_device *p_dev, @@ -586,13 +581,9 @@ static int multi_config(struct pcmcia_device *link) } } - i = pcmcia_request_irq(link, &link->irq); - if (i != 0) { - /* FIXME: comment does not fit, error handling does not fit */ - printk(KERN_NOTICE - "serial_cs: no usable port range found, giving up\n"); - link->irq.AssignedIRQ = 0; - } + if (!link->irq) + dev_warn(&link->dev, + "serial_cs: no usable IRQ found, continuing...\n"); /* * Apply any configuration quirks. @@ -615,11 +606,11 @@ static int multi_config(struct pcmcia_device *link) if (link->conf.ConfigIndex == 1 || link->conf.ConfigIndex == 3) { err = setup_serial(link, info, base2, - link->irq.AssignedIRQ); + link->irq); base2 = link->io.BasePort1; } else { err = setup_serial(link, info, link->io.BasePort1, - link->irq.AssignedIRQ); + link->irq); } info->c950ctrl = base2; @@ -633,10 +624,10 @@ static int multi_config(struct pcmcia_device *link) return 0; } - setup_serial(link, info, link->io.BasePort1, link->irq.AssignedIRQ); + setup_serial(link, info, link->io.BasePort1, link->irq); for (i = 0; i < info->multi - 1; i++) setup_serial(link, info, base2 + (8 * i), - link->irq.AssignedIRQ); + link->irq); return 0; } diff --git a/drivers/ssb/main.c b/drivers/ssb/main.c index 80ff7d9e60de..bc9bdb277bec 100644 --- a/drivers/ssb/main.c +++ b/drivers/ssb/main.c @@ -490,7 +490,7 @@ static int ssb_devices_register(struct ssb_bus *bus) break; case SSB_BUSTYPE_PCMCIA: #ifdef CONFIG_SSB_PCMCIAHOST - sdev->irq = bus->host_pcmcia->irq.AssignedIRQ; + sdev->irq = bus->host_pcmcia->irq; dev->parent = &bus->host_pcmcia->dev; #endif break; diff --git a/drivers/staging/comedi/drivers/cb_das16_cs.c b/drivers/staging/comedi/drivers/cb_das16_cs.c index 5632991760af..e0352c6cf82d 100644 --- a/drivers/staging/comedi/drivers/cb_das16_cs.c +++ b/drivers/staging/comedi/drivers/cb_das16_cs.c @@ -180,12 +180,12 @@ static int das16cs_attach(struct comedi_device *dev, } printk("\n"); - ret = request_irq(link->irq.AssignedIRQ, das16cs_interrupt, + ret = request_irq(link->irq, das16cs_interrupt, IRQF_SHARED, "cb_das16_cs", dev); if (ret < 0) { return ret; } - dev->irq = link->irq.AssignedIRQ; + dev->irq = link->irq; printk("irq=%u ", dev->irq); dev->board_ptr = das16cs_probe(dev, link); @@ -702,10 +702,6 @@ static int das16cs_pcmcia_attach(struct pcmcia_device *link) link->priv = local; /* Initialize the pcmcia_device structure */ - /* Interrupt setup */ - link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING; - link->irq.Handler = NULL; - link->conf.Attributes = 0; link->conf.IntType = INT_MEMORY_AND_IO; @@ -740,8 +736,7 @@ static int das16cs_pcmcia_config_loop(struct pcmcia_device *p_dev, return -EINVAL; /* Do we need to allocate an interrupt? */ - if (cfg->irq.IRQInfo1 || dflt->irq.IRQInfo1) - p_dev->conf.Attributes |= CONF_ENABLE_IRQ; + p_dev->conf.Attributes |= CONF_ENABLE_IRQ; /* IO window settings */ p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0; @@ -780,16 +775,9 @@ static void das16cs_pcmcia_config(struct pcmcia_device *link) goto failed; } - /* - Allocate an interrupt line. Note that this does not assign a - handler to the interrupt, unless the 'Handler' member of the - irq structure is initialized. - */ - if (link->conf.Attributes & CONF_ENABLE_IRQ) { - ret = pcmcia_request_irq(link, &link->irq); - if (ret) - goto failed; - } + if (!link->irq) + goto failed; + /* This actually configures the PCMCIA socket -- setting up the I/O windows and the interrupt mapping, and putting the @@ -811,7 +799,7 @@ static void das16cs_pcmcia_config(struct pcmcia_device *link) printk(KERN_INFO "%s: index 0x%02x", dev->node.dev_name, link->conf.ConfigIndex); if (link->conf.Attributes & CONF_ENABLE_IRQ) - printk(", irq %u", link->irq.AssignedIRQ); + printk(", irq %u", link->irq); if (link->io.NumPorts1) printk(", io 0x%04x-0x%04x", link->io.BasePort1, link->io.BasePort1 + link->io.NumPorts1 - 1); diff --git a/drivers/staging/comedi/drivers/das08_cs.c b/drivers/staging/comedi/drivers/das08_cs.c index 9164ce158dcd..bd69c4fdcbf5 100644 --- a/drivers/staging/comedi/drivers/das08_cs.c +++ b/drivers/staging/comedi/drivers/das08_cs.c @@ -172,10 +172,6 @@ static int das08_pcmcia_attach(struct pcmcia_device *link) local->link = link; link->priv = local; - /* Interrupt setup */ - link->irq.Attributes = IRQ_TYPE_EXCLUSIVE; - link->irq.Handler = NULL; - /* General socket configuration defaults can go here. In this client, we assume very little, and rely on the CIS for almost @@ -229,8 +225,7 @@ static int das08_pcmcia_config_loop(struct pcmcia_device *p_dev, return -ENODEV; /* Do we need to allocate an interrupt? */ - if (cfg->irq.IRQInfo1 || dflt->irq.IRQInfo1) - p_dev->conf.Attributes |= CONF_ENABLE_IRQ; + p_dev->conf.Attributes |= CONF_ENABLE_IRQ; /* IO window settings */ p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0; @@ -277,11 +272,8 @@ static void das08_pcmcia_config(struct pcmcia_device *link) goto failed; } - if (link->conf.Attributes & CONF_ENABLE_IRQ) { - ret = pcmcia_request_irq(link, &link->irq); - if (ret) - goto failed; - } + if (!link->irq) + goto failed; /* This actually configures the PCMCIA socket -- setting up @@ -304,7 +296,7 @@ static void das08_pcmcia_config(struct pcmcia_device *link) printk(KERN_INFO "%s: index 0x%02x", dev->node.dev_name, link->conf.ConfigIndex); if (link->conf.Attributes & CONF_ENABLE_IRQ) - printk(", irq %u", link->irq.AssignedIRQ); + printk(", irq %u", link->irq); if (link->io.NumPorts1) printk(", io 0x%04x-0x%04x", link->io.BasePort1, link->io.BasePort1 + link->io.NumPorts1 - 1); diff --git a/drivers/staging/comedi/drivers/ni_daq_700.c b/drivers/staging/comedi/drivers/ni_daq_700.c index 7ea64538e055..072bc4b62011 100644 --- a/drivers/staging/comedi/drivers/ni_daq_700.c +++ b/drivers/staging/comedi/drivers/ni_daq_700.c @@ -380,7 +380,7 @@ static int dio700_attach(struct comedi_device *dev, struct comedi_devconfig *it) return -EIO; iobase = link->io.BasePort1; #ifdef incomplete - irq = link->irq.AssignedIRQ; + irq = link->irq; #endif break; default: @@ -502,10 +502,6 @@ static int dio700_cs_attach(struct pcmcia_device *link) local->link = link; link->priv = local; - /* Interrupt setup */ - link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING; - link->irq.Handler = NULL; - /* General socket configuration defaults can go here. In this client, we assume very little, and rely on the CIS for almost @@ -577,8 +573,7 @@ static int dio700_pcmcia_config_loop(struct pcmcia_device *p_dev, } /* Do we need to allocate an interrupt? */ - if (cfg->irq.IRQInfo1 || dflt->irq.IRQInfo1) - p_dev->conf.Attributes |= CONF_ENABLE_IRQ; + p_dev->conf.Attributes |= CONF_ENABLE_IRQ; /* IO window settings */ p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0; @@ -639,16 +634,8 @@ static void dio700_config(struct pcmcia_device *link) goto failed; } - /* - Allocate an interrupt line. Note that this does not assign a - handler to the interrupt, unless the 'Handler' member of the - irq structure is initialized. - */ - if (link->conf.Attributes & CONF_ENABLE_IRQ) { - ret = pcmcia_request_irq(link, &link->irq); - if (ret) - goto failed; - } + if (!link->irq) + goto failed; /* This actually configures the PCMCIA socket -- setting up @@ -671,7 +658,7 @@ static void dio700_config(struct pcmcia_device *link) printk(KERN_INFO "%s: index 0x%02x", dev->node.dev_name, link->conf.ConfigIndex); if (link->conf.Attributes & CONF_ENABLE_IRQ) - printk(", irq %d", link->irq.AssignedIRQ); + printk(", irq %d", link->irq); if (link->io.NumPorts1) printk(", io 0x%04x-0x%04x", link->io.BasePort1, link->io.BasePort1 + link->io.NumPorts1 - 1); diff --git a/drivers/staging/comedi/drivers/ni_daq_dio24.c b/drivers/staging/comedi/drivers/ni_daq_dio24.c index ddc312b5d20d..2259fb40608b 100644 --- a/drivers/staging/comedi/drivers/ni_daq_dio24.c +++ b/drivers/staging/comedi/drivers/ni_daq_dio24.c @@ -131,7 +131,7 @@ static int dio24_attach(struct comedi_device *dev, struct comedi_devconfig *it) return -EIO; iobase = link->io.BasePort1; #ifdef incomplete - irq = link->irq.AssignedIRQ; + irq = link->irq; #endif break; default: @@ -253,10 +253,6 @@ static int dio24_cs_attach(struct pcmcia_device *link) local->link = link; link->priv = local; - /* Interrupt setup */ - link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING; - link->irq.Handler = NULL; - /* General socket configuration defaults can go here. In this client, we assume very little, and rely on the CIS for almost @@ -328,8 +324,7 @@ static int dio24_pcmcia_config_loop(struct pcmcia_device *p_dev, } /* Do we need to allocate an interrupt? */ - if (cfg->irq.IRQInfo1 || dflt->irq.IRQInfo1) - p_dev->conf.Attributes |= CONF_ENABLE_IRQ; + p_dev->conf.Attributes |= CONF_ENABLE_IRQ; /* IO window settings */ p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0; @@ -390,16 +385,8 @@ static void dio24_config(struct pcmcia_device *link) goto failed; } - /* - Allocate an interrupt line. Note that this does not assign a - handler to the interrupt, unless the 'Handler' member of the - irq structure is initialized. - */ - if (link->conf.Attributes & CONF_ENABLE_IRQ) { - ret = pcmcia_request_irq(link, &link->irq); - if (ret) - goto failed; - } + if (!link->irq) + goto failed; /* This actually configures the PCMCIA socket -- setting up @@ -422,7 +409,7 @@ static void dio24_config(struct pcmcia_device *link) printk(KERN_INFO "%s: index 0x%02x", dev->node.dev_name, link->conf.ConfigIndex); if (link->conf.Attributes & CONF_ENABLE_IRQ) - printk(", irq %d", link->irq.AssignedIRQ); + printk(", irq %d", link->irq); if (link->io.NumPorts1) printk(", io 0x%04x-0x%04x", link->io.BasePort1, link->io.BasePort1 + link->io.NumPorts1 - 1); diff --git a/drivers/staging/comedi/drivers/ni_labpc_cs.c b/drivers/staging/comedi/drivers/ni_labpc_cs.c index 6e4ed0d9105a..907b2ae467b2 100644 --- a/drivers/staging/comedi/drivers/ni_labpc_cs.c +++ b/drivers/staging/comedi/drivers/ni_labpc_cs.c @@ -144,7 +144,7 @@ static int labpc_attach(struct comedi_device *dev, struct comedi_devconfig *it) if (!link) return -EIO; iobase = link->io.BasePort1; - irq = link->irq.AssignedIRQ; + irq = link->irq; break; default: printk("bug! couldn't determine board type\n"); @@ -229,10 +229,6 @@ static int labpc_cs_attach(struct pcmcia_device *link) local->link = link; link->priv = local; - /* Interrupt setup */ - link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING; - link->irq.Handler = NULL; - /* General socket configuration defaults can go here. In this client, we assume very little, and rely on the CIS for almost @@ -306,9 +302,7 @@ static int labpc_pcmcia_config_loop(struct pcmcia_device *p_dev, } /* Do we need to allocate an interrupt? */ - if (cfg->irq.IRQInfo1 || dflt->irq.IRQInfo1) - p_dev->conf.Attributes |= - (CONF_ENABLE_IRQ | CONF_ENABLE_PULSE_IRQ); + p_dev->conf.Attributes |= CONF_ENABLE_IRQ | CONF_ENABLE_PULSE_IRQ; /* IO window settings */ p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0; @@ -368,16 +362,8 @@ static void labpc_config(struct pcmcia_device *link) goto failed; } - /* - Allocate an interrupt line. Note that this does not assign a - handler to the interrupt, unless the 'Handler' member of the - irq structure is initialized. - */ - if (link->conf.Attributes & CONF_ENABLE_IRQ) { - ret = pcmcia_request_irq(link, &link->irq); - if (ret) - goto failed; - } + if (!link->irq) + goto failed; /* This actually configures the PCMCIA socket -- setting up @@ -400,7 +386,7 @@ static void labpc_config(struct pcmcia_device *link) printk(KERN_INFO "%s: index 0x%02x", dev->node.dev_name, link->conf.ConfigIndex); if (link->conf.Attributes & CONF_ENABLE_IRQ) - printk(", irq %d", link->irq.AssignedIRQ); + printk(", irq %d", link->irq); if (link->io.NumPorts1) printk(", io 0x%04x-0x%04x", link->io.BasePort1, link->io.BasePort1 + link->io.NumPorts1 - 1); diff --git a/drivers/staging/comedi/drivers/ni_mio_cs.c b/drivers/staging/comedi/drivers/ni_mio_cs.c index dc4849a40c97..a6007abce34a 100644 --- a/drivers/staging/comedi/drivers/ni_mio_cs.c +++ b/drivers/staging/comedi/drivers/ni_mio_cs.c @@ -272,7 +272,6 @@ static int cs_attach(struct pcmcia_device *link) { link->io.Attributes1 = IO_DATA_PATH_WIDTH_16; link->io.NumPorts1 = 16; - link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING; link->conf.Attributes = CONF_ENABLE_IRQ; link->conf.IntType = INT_MEMORY_AND_IO; @@ -344,10 +343,8 @@ static void mio_cs_config(struct pcmcia_device *link) return; } - ret = pcmcia_request_irq(link, &link->irq); - if (ret) { - printk("pcmcia_request_irq() returned error: %i\n", ret); - } + if (!link->irq) + dev_info(&link->dev, "no IRQ available\n"); ret = pcmcia_request_configuration(link, &link->conf); @@ -369,7 +366,7 @@ static int mio_cs_attach(struct comedi_device *dev, struct comedi_devconfig *it) dev->driver = &driver_ni_mio_cs; dev->iobase = link->io.BasePort1; - irq = link->irq.AssignedIRQ; + irq = link->irq; printk("comedi%d: %s: DAQCard: io 0x%04lx, irq %u, ", dev->minor, dev->driver->driver_name, dev->iobase, irq); diff --git a/drivers/staging/comedi/drivers/quatech_daqp_cs.c b/drivers/staging/comedi/drivers/quatech_daqp_cs.c index 3325f24448b5..7aa17f92968c 100644 --- a/drivers/staging/comedi/drivers/quatech_daqp_cs.c +++ b/drivers/staging/comedi/drivers/quatech_daqp_cs.c @@ -1040,10 +1040,6 @@ static int daqp_cs_attach(struct pcmcia_device *link) local->link = link; link->priv = local; - /* Interrupt setup */ - link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING; - link->irq.Handler = daqp_interrupt; - /* General socket configuration defaults can go here. In this client, we assume very little, and rely on the CIS for almost @@ -1105,8 +1101,7 @@ static int daqp_pcmcia_config_loop(struct pcmcia_device *p_dev, return -ENODEV; /* Do we need to allocate an interrupt? */ - if (cfg->irq.IRQInfo1 || dflt->irq.IRQInfo1) - p_dev->conf.Attributes |= CONF_ENABLE_IRQ; + p_dev->conf.Attributes |= CONF_ENABLE_IRQ; /* IO window settings */ p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0; @@ -1144,16 +1139,9 @@ static void daqp_cs_config(struct pcmcia_device *link) goto failed; } - /* - Allocate an interrupt line. Note that this does not assign a - handler to the interrupt, unless the 'Handler' member of the - irq structure is initialized. - */ - if (link->conf.Attributes & CONF_ENABLE_IRQ) { - ret = pcmcia_request_irq(link, &link->irq); - if (ret) - goto failed; - } + ret = pcmcia_request_irq(link, daqp_interrupt); + if (ret) + goto failed; /* This actually configures the PCMCIA socket -- setting up @@ -1180,7 +1168,7 @@ static void daqp_cs_config(struct pcmcia_device *link) printk(KERN_INFO "%s: index 0x%02x", dev->node.dev_name, link->conf.ConfigIndex); if (link->conf.Attributes & CONF_ENABLE_IRQ) - printk(", irq %u", link->irq.AssignedIRQ); + printk(", irq %u", link->irq); if (link->io.NumPorts1) printk(", io 0x%04x-0x%04x", link->io.BasePort1, link->io.BasePort1 + link->io.NumPorts1 - 1); diff --git a/drivers/staging/netwave/netwave_cs.c b/drivers/staging/netwave/netwave_cs.c index 3875a722d12b..449e6a5c19e1 100644 --- a/drivers/staging/netwave/netwave_cs.c +++ b/drivers/staging/netwave/netwave_cs.c @@ -382,10 +382,6 @@ static int netwave_probe(struct pcmcia_device *link) link->io.Attributes2 = IO_DATA_PATH_WIDTH_16; */ link->io.IOAddrLines = 5; - /* Interrupt setup */ - link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING; - link->irq.Handler = &netwave_interrupt; - /* General socket configuration */ link->conf.Attributes = CONF_ENABLE_IRQ; link->conf.IntType = INT_MEMORY_AND_IO; @@ -732,7 +728,7 @@ static int netwave_pcmcia_config(struct pcmcia_device *link) { * Now allocate an interrupt line. Note that this does not * actually assign a handler to the interrupt. */ - ret = pcmcia_request_irq(link, &link->irq); + ret = pcmcia_request_irq(link, netwave_interrupt); if (ret) goto failed; @@ -767,7 +763,7 @@ static int netwave_pcmcia_config(struct pcmcia_device *link) { ramBase = ioremap(req.Base, 0x8000); priv->ramBase = ramBase; - dev->irq = link->irq.AssignedIRQ; + dev->irq = link->irq; dev->base_addr = link->io.BasePort1; SET_NETDEV_DEV(dev, &link->dev); diff --git a/drivers/staging/wavelan/wavelan_cs.c b/drivers/staging/wavelan/wavelan_cs.c index 04f691d127b4..37fa85517a58 100644 --- a/drivers/staging/wavelan/wavelan_cs.c +++ b/drivers/staging/wavelan/wavelan_cs.c @@ -3850,12 +3850,8 @@ wv_pcmcia_config(struct pcmcia_device * link) if (i != 0) break; - /* - * Now allocate an interrupt line. Note that this does not - * actually assign a handler to the interrupt. - */ - i = pcmcia_request_irq(link, &link->irq); - if (i != 0) + i = pcmcia_request_interrupt(link, wavelan_interrupt); + if (!i) break; /* @@ -3890,7 +3886,7 @@ wv_pcmcia_config(struct pcmcia_device * link) break; /* Feed device with this info... */ - dev->irq = link->irq.AssignedIRQ; + dev->irq = link->irq; dev->base_addr = link->io.BasePort1; netif_start_queue(dev); @@ -4437,10 +4433,6 @@ wavelan_probe(struct pcmcia_device *p_dev) p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8; p_dev->io.IOAddrLines = 3; - /* Interrupt setup */ - p_dev->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING; - p_dev->irq.Handler = wavelan_interrupt; - /* General socket configuration */ p_dev->conf.Attributes = CONF_ENABLE_IRQ; p_dev->conf.IntType = INT_MEMORY_AND_IO; @@ -4487,7 +4479,6 @@ wavelan_probe(struct pcmcia_device *p_dev) ret = wv_hw_config(dev); if (ret) { - dev->irq = 0; pcmcia_disable_device(p_dev); return ret; } diff --git a/drivers/staging/wlags49_h2/wl_cs.c b/drivers/staging/wlags49_h2/wl_cs.c index 9da42e66085e..c9d99d88b786 100644 --- a/drivers/staging/wlags49_h2/wl_cs.c +++ b/drivers/staging/wlags49_h2/wl_cs.c @@ -156,15 +156,12 @@ static int wl_adapter_attach(struct pcmcia_device *link) link->io.NumPorts1 = HCF_NUM_IO_PORTS; link->io.Attributes1 = IO_DATA_PATH_WIDTH_16; link->io.IOAddrLines = 6; - link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING | IRQ_HANDLE_PRESENT; - link->irq.IRQInfo1 = IRQ_INFO2_VALID | IRQ_LEVEL_ID; - link->irq.Handler = &wl_isr; link->conf.Attributes = CONF_ENABLE_IRQ; link->conf.IntType = INT_MEMORY_AND_IO; link->conf.ConfigIndex = 5; link->conf.Present = PRESENT_OPTION; - link->priv = link->irq.Instance = dev; + link->priv = dev; lp = wl_priv(dev); lp->link = link; @@ -318,11 +315,11 @@ void wl_adapter_insert( struct pcmcia_device *link ) link->conf.Attributes |= CONF_ENABLE_IRQ; CS_CHECK(RequestIO, pcmcia_request_io(link, &link->io)); - CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq)); + CS_CHECK(RequestIRQ, pcmcia_request_irq(link, wl_isr)); CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link, &link->conf)); - dev->irq = link->irq.AssignedIRQ; + dev->irq = link->irq; dev->base_addr = link->io.BasePort1; SET_NETDEV_DEV(dev, &handle_to_dev(link)); diff --git a/drivers/usb/host/sl811_cs.c b/drivers/usb/host/sl811_cs.c index 39d253e841f6..a712788f9b10 100644 --- a/drivers/usb/host/sl811_cs.c +++ b/drivers/usb/host/sl811_cs.c @@ -163,8 +163,7 @@ static int sl811_cs_config_check(struct pcmcia_device *p_dev, dflt->vpp1.param[CISTPL_POWER_VNOM]/10000; /* we need an interrupt */ - if (cfg->irq.IRQInfo1 || dflt->irq.IRQInfo1) - p_dev->conf.Attributes |= CONF_ENABLE_IRQ; + p_dev->conf.Attributes |= CONF_ENABLE_IRQ; /* IO window settings */ p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0; @@ -197,11 +196,8 @@ static int sl811_cs_config(struct pcmcia_device *link) /* require an IRQ and two registers */ if (!link->io.NumPorts1 || link->io.NumPorts1 < 2) goto failed; - if (link->conf.Attributes & CONF_ENABLE_IRQ) { - ret = pcmcia_request_irq(link, &link->irq); - if (ret) - goto failed; - } else + + if (!link->irq) goto failed; ret = pcmcia_request_configuration(link, &link->conf); @@ -216,12 +212,12 @@ static int sl811_cs_config(struct pcmcia_device *link) dev->node.dev_name, link->conf.ConfigIndex); if (link->conf.Vpp) printk(", Vpp %d.%d", link->conf.Vpp/10, link->conf.Vpp%10); - printk(", irq %d", link->irq.AssignedIRQ); + printk(", irq %d", link->irq); printk(", io 0x%04x-0x%04x", link->io.BasePort1, link->io.BasePort1+link->io.NumPorts1-1); printk("\n"); - if (sl811_hc_init(parent, link->io.BasePort1, link->irq.AssignedIRQ) + if (sl811_hc_init(parent, link->io.BasePort1, link->irq) < 0) { failed: printk(KERN_WARNING "sl811_cs_config failed\n"); @@ -241,10 +237,6 @@ static int sl811_cs_probe(struct pcmcia_device *link) local->p_dev = link; link->priv = local; - /* Initialize */ - link->irq.Attributes = IRQ_TYPE_EXCLUSIVE; - link->irq.Handler = NULL; - link->conf.Attributes = 0; link->conf.IntType = INT_MEMORY_AND_IO; diff --git a/include/pcmcia/cs.h b/include/pcmcia/cs.h index af615716dc23..a04e6caa585a 100644 --- a/include/pcmcia/cs.h +++ b/include/pcmcia/cs.h @@ -114,13 +114,6 @@ typedef struct io_req_t { #define IO_DATA_PATH_WIDTH_16 0x08 #define IO_DATA_PATH_WIDTH_AUTO 0x10 -/* For RequestIRQ and ReleaseIRQ */ -typedef struct irq_req_t { - u_int Attributes; - u_int AssignedIRQ; - irq_handler_t Handler; -} irq_req_t; - /* Attributes for RequestIRQ and ReleaseIRQ */ #define IRQ_TYPE 0x03 #define IRQ_TYPE_EXCLUSIVE 0x00 diff --git a/include/pcmcia/ds.h b/include/pcmcia/ds.h index 52ebe75664e8..d18330b401b1 100644 --- a/include/pcmcia/ds.h +++ b/include/pcmcia/ds.h @@ -91,12 +91,11 @@ struct pcmcia_device { dev_node_t *dev_node; u_int open; io_req_t io; - irq_req_t irq; config_req_t conf; window_handle_t win; /* device setup */ - unsigned int irq_v; /* do not use directly yet */ + unsigned int irq; /* Is the device suspended? */ u16 suspended:1; @@ -194,7 +193,13 @@ int pcmcia_access_configuration_register(struct pcmcia_device *p_dev, /* device configuration */ int pcmcia_request_io(struct pcmcia_device *p_dev, io_req_t *req); -int pcmcia_request_irq(struct pcmcia_device *p_dev, irq_req_t *req); + +int __must_check __deprecated +pcmcia_request_exclusive_irq(struct pcmcia_device *p_dev, + irq_handler_t handler); +int __must_check pcmcia_request_irq(struct pcmcia_device *p_dev, + irq_handler_t handler); + int pcmcia_request_configuration(struct pcmcia_device *p_dev, config_req_t *req); diff --git a/sound/pcmcia/pdaudiocf/pdaudiocf.c b/sound/pcmcia/pdaudiocf/pdaudiocf.c index dcf85390c5f9..60fddf363d54 100644 --- a/sound/pcmcia/pdaudiocf/pdaudiocf.c +++ b/sound/pcmcia/pdaudiocf/pdaudiocf.c @@ -142,11 +142,6 @@ static int snd_pdacf_probe(struct pcmcia_device *link) link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; link->io.NumPorts1 = 16; - link->irq.Attributes = IRQ_TYPE_EXCLUSIVE; - /* FIXME: This driver should be updated to allow for dynamic IRQ sharing */ - /* link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING; */ - - link->irq.Handler = pdacf_interrupt; link->conf.Attributes = CONF_ENABLE_IRQ | CONF_ENABLE_PULSE_IRQ; link->conf.IntType = INT_MEMORY_AND_IO; link->conf.ConfigIndex = 1; @@ -228,7 +223,7 @@ static int pdacf_config(struct pcmcia_device *link) if (ret) goto failed; - ret = pcmcia_request_irq(link, &link->irq); + ret = pcmcia_request_exclusive_irq(link, pdacf_interrupt); if (ret) goto failed; @@ -236,7 +231,7 @@ static int pdacf_config(struct pcmcia_device *link) if (ret) goto failed; - if (snd_pdacf_assign_resources(pdacf, link->io.BasePort1, link->irq.AssignedIRQ) < 0) + if (snd_pdacf_assign_resources(pdacf, link->io.BasePort1, link->irq) < 0) goto failed; link->dev_node = &pdacf->node; diff --git a/sound/pcmcia/vx/vxpocket.c b/sound/pcmcia/vx/vxpocket.c index cfd1438bcc64..5eced7a7c987 100644 --- a/sound/pcmcia/vx/vxpocket.c +++ b/sound/pcmcia/vx/vxpocket.c @@ -162,10 +162,6 @@ static int snd_vxpocket_new(struct snd_card *card, int ibl, link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; link->io.NumPorts1 = 16; - link->irq.Attributes = IRQ_TYPE_EXCLUSIVE; - - link->irq.Handler = &snd_vx_irq_handler; - link->conf.Attributes = CONF_ENABLE_IRQ; link->conf.IntType = INT_MEMORY_AND_IO; link->conf.ConfigIndex = 1; @@ -235,7 +231,7 @@ static int vxpocket_config(struct pcmcia_device *link) if (ret) goto failed; - ret = pcmcia_request_irq(link, &link->irq); + ret = pcmcia_request_exclusive_irq(link, snd_vx_irq_handler); if (ret) goto failed; @@ -246,7 +242,7 @@ static int vxpocket_config(struct pcmcia_device *link) chip->dev = &link->dev; snd_card_set_dev(chip->card, chip->dev); - if (snd_vxpocket_assign_resources(chip, link->io.BasePort1, link->irq.AssignedIRQ) < 0) + if (snd_vxpocket_assign_resources(chip, link->io.BasePort1, link->irq) < 0) goto failed; link->dev_node = &vxp->node; -- cgit v1.2.3