From b78a4932f5fb11fadf41e69c606a33fa6787574c Mon Sep 17 00:00:00 2001 From: Simon Wunderlich Date: Tue, 13 Nov 2012 18:43:03 +0100 Subject: mac80211: deinitialize ibss-internals after emptiness check The check whether the IBSS is active and can be removed should be performed before deinitializing the fields used for the check/search. Otherwise, the configured BSS will not be found and removed properly. To make it more clear for the future, rename sdata->u.ibss to the local pointer ifibss which is used within the checks. This behaviour was introduced by f3209bea110cade12e2b133da8b8499689cb0e2e ("mac80211: fix IBSS teardown race") Cc: stable@vger.kernel.org Cc: Ignacy Gawedzki Signed-off-by: Simon Wunderlich Signed-off-by: Johannes Berg --- net/mac80211/ibss.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/net/mac80211/ibss.c b/net/mac80211/ibss.c index bf87c70ac6c5..c21e33d1abd0 100644 --- a/net/mac80211/ibss.c +++ b/net/mac80211/ibss.c @@ -1151,10 +1151,6 @@ int ieee80211_ibss_leave(struct ieee80211_sub_if_data *sdata) mutex_lock(&sdata->u.ibss.mtx); - sdata->u.ibss.state = IEEE80211_IBSS_MLME_SEARCH; - memset(sdata->u.ibss.bssid, 0, ETH_ALEN); - sdata->u.ibss.ssid_len = 0; - active_ibss = ieee80211_sta_active_ibss(sdata); if (!active_ibss && !is_zero_ether_addr(ifibss->bssid)) { @@ -1175,6 +1171,10 @@ int ieee80211_ibss_leave(struct ieee80211_sub_if_data *sdata) } } + ifibss->state = IEEE80211_IBSS_MLME_SEARCH; + memset(ifibss->bssid, 0, ETH_ALEN); + ifibss->ssid_len = 0; + sta_info_flush(sdata->local, sdata); spin_lock_bh(&ifibss->incomplete_lock); -- cgit v1.2.3 From 04baaa27b43d389879237b32f8bd194a94cf1ca7 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 13 Nov 2012 21:28:44 +0100 Subject: iwlwifi: fix monitor mode FCS flag When the firmware is in SNIFFER mode, it leaves the FCS at the end of frame. Not telling mac80211 means it won't add the right flag to the radiotap header and that confuses wireshark. Since mac80211 doesn't have a per-packet flag, set the HW flag dynamically. This works as the monitor vif can only be present in the driver by itself. This fixes a regression introduced by my commit 578977264199de9815ace51ade87cec4894cf010 Author: Johannes Berg Date: Fri May 11 10:53:18 2012 +0200 iwlwifi: support explicit monitor interface Cc: stable@vger.kernel.org [3.5+] Reported-by: MARK PHILLIPS Reviewed-by: Emmanuel Grumbach Signed-off-by: Johannes Berg --- drivers/net/wireless/iwlwifi/dvm/mac80211.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/drivers/net/wireless/iwlwifi/dvm/mac80211.c b/drivers/net/wireless/iwlwifi/dvm/mac80211.c index fa4d1b8cd9f6..2d9eee93c743 100644 --- a/drivers/net/wireless/iwlwifi/dvm/mac80211.c +++ b/drivers/net/wireless/iwlwifi/dvm/mac80211.c @@ -1354,6 +1354,20 @@ static int iwlagn_mac_add_interface(struct ieee80211_hw *hw, vif_priv->ctx = ctx; ctx->vif = vif; + /* + * In SNIFFER device type, the firmware reports the FCS to + * the host, rather than snipping it off. Unfortunately, + * mac80211 doesn't (yet) provide a per-packet flag for + * this, so that we have to set the hardware flag based + * on the interfaces added. As the monitor interface can + * only be present by itself, and will be removed before + * other interfaces are added, this is safe. + */ + if (vif->type == NL80211_IFTYPE_MONITOR) + priv->hw->flags |= IEEE80211_HW_RX_INCLUDES_FCS; + else + priv->hw->flags &= ~IEEE80211_HW_RX_INCLUDES_FCS; + err = iwl_setup_interface(priv, ctx); if (!err || reset) goto out; -- cgit v1.2.3 From a485e827f07bfdd0762059386e6e787bed6e81ee Mon Sep 17 00:00:00 2001 From: Albert Pool Date: Tue, 30 Oct 2012 20:58:06 +0100 Subject: rtlwifi: rtl8192cu: Add new USB ID This is an ISY IWL 2000. Probably a clone of Belkin F7D1102 050d:1102. Its FCC ID is the same. Signed-off-by: Albert Pool Cc: stable@vger.kernel.org Acked-by: Larry Finger Signed-off-by: John W. Linville --- drivers/net/wireless/rtlwifi/rtl8192cu/sw.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c b/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c index 9970c2b1b199..b7e6607e6b6d 100644 --- a/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c +++ b/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c @@ -297,6 +297,7 @@ static struct usb_device_id rtl8192c_usb_ids[] = { /*=== Customer ID ===*/ /****** 8188CU ********/ {RTL_USB_DEVICE(0x050d, 0x1102, rtl92cu_hal_cfg)}, /*Belkin - Edimax*/ + {RTL_USB_DEVICE(0x050d, 0x11f2, rtl92cu_hal_cfg)}, /*Belkin - ISY*/ {RTL_USB_DEVICE(0x06f8, 0xe033, rtl92cu_hal_cfg)}, /*Hercules - Edimax*/ {RTL_USB_DEVICE(0x07b8, 0x8188, rtl92cu_hal_cfg)}, /*Abocom - Abocom*/ {RTL_USB_DEVICE(0x07b8, 0x8189, rtl92cu_hal_cfg)}, /*Funai - Abocom*/ -- cgit v1.2.3 From b1a47aa5e1e159e2cb06d7dfcc17ef5149b09299 Mon Sep 17 00:00:00 2001 From: Bing Zhao Date: Thu, 15 Nov 2012 15:58:47 -0800 Subject: mwifiex: fix system hang issue in cmd timeout error case Reported by Tim Shepard: I was seeing sporadic failures (wedgeups), and the majority of those failures I saw printed the printouts in mwifiex_cmd_timeout_func with cmd = 0xe5 which is CMD_802_11_HS_CFG_ENH. When this happens, two minutes later I get notified that the rtcwake thread is blocked, like this: INFO: task rtcwake:3495 blocked for more than 120 seconds. To get the hung thread unblocked we wake up the cmd wait queue and cancel the ioctl. Cc: "3.4+" Reported-by: Tim Shepard Signed-off-by: Bing Zhao Signed-off-by: John W. Linville --- drivers/net/wireless/mwifiex/cmdevt.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) diff --git a/drivers/net/wireless/mwifiex/cmdevt.c b/drivers/net/wireless/mwifiex/cmdevt.c index 8d465107f52b..ae9010ed58de 100644 --- a/drivers/net/wireless/mwifiex/cmdevt.c +++ b/drivers/net/wireless/mwifiex/cmdevt.c @@ -890,9 +890,6 @@ mwifiex_cmd_timeout_func(unsigned long function_context) return; } cmd_node = adapter->curr_cmd; - if (cmd_node->wait_q_enabled) - adapter->cmd_wait_q.status = -ETIMEDOUT; - if (cmd_node) { adapter->dbg.timeout_cmd_id = adapter->dbg.last_cmd_id[adapter->dbg.last_cmd_index]; @@ -938,6 +935,14 @@ mwifiex_cmd_timeout_func(unsigned long function_context) dev_err(adapter->dev, "ps_mode=%d ps_state=%d\n", adapter->ps_mode, adapter->ps_state); + + if (cmd_node->wait_q_enabled) { + adapter->cmd_wait_q.status = -ETIMEDOUT; + wake_up_interruptible(&adapter->cmd_wait_q.wait); + mwifiex_cancel_pending_ioctl(adapter); + /* reset cmd_sent flag to unblock new commands */ + adapter->cmd_sent = false; + } } if (adapter->hw_status == MWIFIEX_HW_STATUS_INITIALIZING) mwifiex_init_fw_complete(adapter); -- cgit v1.2.3 From dd321acddc3be1371263b8c9e6c6f2af89f63d57 Mon Sep 17 00:00:00 2001 From: Bing Zhao Date: Thu, 15 Nov 2012 15:58:48 -0800 Subject: mwifiex: report error to MMC core if we cannot suspend When host_sleep_config command fails we should return error to MMC core to indicate the failure for our device. The misspelled variable is also removed as it's redundant. Cc: "3.0+" Signed-off-by: Bing Zhao Signed-off-by: John W. Linville --- drivers/net/wireless/mwifiex/sdio.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) diff --git a/drivers/net/wireless/mwifiex/sdio.c b/drivers/net/wireless/mwifiex/sdio.c index fc8a9bfa1248..82cf0fa2d9f6 100644 --- a/drivers/net/wireless/mwifiex/sdio.c +++ b/drivers/net/wireless/mwifiex/sdio.c @@ -161,7 +161,6 @@ static int mwifiex_sdio_suspend(struct device *dev) struct sdio_mmc_card *card; struct mwifiex_adapter *adapter; mmc_pm_flag_t pm_flag = 0; - int hs_actived = 0; int i; int ret = 0; @@ -188,12 +187,14 @@ static int mwifiex_sdio_suspend(struct device *dev) adapter = card->adapter; /* Enable the Host Sleep */ - hs_actived = mwifiex_enable_hs(adapter); - if (hs_actived) { - pr_debug("cmd: suspend with MMC_PM_KEEP_POWER\n"); - ret = sdio_set_host_pm_flags(func, MMC_PM_KEEP_POWER); + if (!mwifiex_enable_hs(adapter)) { + dev_err(adapter->dev, "cmd: failed to suspend\n"); + return -EFAULT; } + dev_dbg(adapter->dev, "cmd: suspend with MMC_PM_KEEP_POWER\n"); + ret = sdio_set_host_pm_flags(func, MMC_PM_KEEP_POWER); + /* Indicate device suspended */ adapter->is_suspended = true; -- cgit v1.2.3 From 38c1a01cf10c6e4049b4ffbd4a6af655df2a46e1 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 16 Nov 2012 20:46:19 +0100 Subject: wireless: add back sysfs directory commit 35b2a113cb0298d4f9a1263338b456094a414057 broke (at least) Fedora's networking scripts, they check for the existence of the wireless directory. As the files aren't used, add the directory back and not the files. Also do it for both drivers based on the old wireless extensions and cfg80211, regardless of whether the compat code for wext is built into cfg80211 or not. Cc: stable@vger.kernel.org [3.6] Reported-by: Dave Airlie Reported-by: Bill Nottingham Signed-off-by: Johannes Berg --- net/core/net-sysfs.c | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) diff --git a/net/core/net-sysfs.c b/net/core/net-sysfs.c index bcf02f608cbf..017a8bacfb27 100644 --- a/net/core/net-sysfs.c +++ b/net/core/net-sysfs.c @@ -429,6 +429,17 @@ static struct attribute_group netstat_group = { .name = "statistics", .attrs = netstat_attrs, }; + +#if IS_ENABLED(CONFIG_WIRELESS_EXT) || IS_ENABLED(CONFIG_CFG80211) +static struct attribute *wireless_attrs[] = { + NULL +}; + +static struct attribute_group wireless_group = { + .name = "wireless", + .attrs = wireless_attrs, +}; +#endif #endif /* CONFIG_SYSFS */ #ifdef CONFIG_RPS @@ -1409,6 +1420,15 @@ int netdev_register_kobject(struct net_device *net) groups++; *groups++ = &netstat_group; + +#if IS_ENABLED(CONFIG_WIRELESS_EXT) || IS_ENABLED(CONFIG_CFG80211) + if (net->ieee80211_ptr) + *groups++ = &wireless_group; +#if IS_ENABLED(CONFIG_WIRELESS_EXT) + else if (net->wireless_handlers) + *groups++ = &wireless_group; +#endif +#endif #endif /* CONFIG_SYSFS */ error = device_add(dev); -- cgit v1.2.3 From e1b69fdf33f63cfa600b992172d7376f9d9ef2e9 Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Mon, 15 Oct 2012 17:57:36 +0200 Subject: iwlwifi: don't WARN when a non empty queue is disabled This can happen when we shut down suddenly an interface. Cc: stable@vger.kernel.org Signed-off-by: Emmanuel Grumbach Signed-off-by: Johannes Berg --- drivers/net/wireless/iwlwifi/pcie/tx.c | 8 -------- 1 file changed, 8 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/pcie/tx.c b/drivers/net/wireless/iwlwifi/pcie/tx.c index 105e3af3c621..79a4ddc002d3 100644 --- a/drivers/net/wireless/iwlwifi/pcie/tx.c +++ b/drivers/net/wireless/iwlwifi/pcie/tx.c @@ -480,20 +480,12 @@ void iwl_trans_pcie_txq_enable(struct iwl_trans *trans, int txq_id, int fifo, void iwl_trans_pcie_txq_disable(struct iwl_trans *trans, int txq_id) { struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans); - u16 rd_ptr, wr_ptr; - int n_bd = trans_pcie->txq[txq_id].q.n_bd; if (!test_and_clear_bit(txq_id, trans_pcie->queue_used)) { WARN_ONCE(1, "queue %d not used", txq_id); return; } - rd_ptr = iwl_read_prph(trans, SCD_QUEUE_RDPTR(txq_id)) & (n_bd - 1); - wr_ptr = iwl_read_prph(trans, SCD_QUEUE_WRPTR(txq_id)); - - WARN_ONCE(rd_ptr != wr_ptr, "queue %d isn't empty: [%d,%d]", - txq_id, rd_ptr, wr_ptr); - iwl_txq_set_inactive(trans, txq_id); IWL_DEBUG_TX_QUEUES(trans, "Deactivate queue %d\n", txq_id); } -- cgit v1.2.3 From da8fb123b041e487d28f54d3a77a15139cb9e3b9 Mon Sep 17 00:00:00 2001 From: Sujith Manoharan Date: Sat, 17 Nov 2012 21:20:50 +0530 Subject: ath9k_hw: Fix regression in device reset Commit "ath9k: improve suspend/resume reliability" broke ath9k_htc and bringing up the device would hang indefinitely. Fix this. Cc: stable@vger.kernel.org Signed-off-by: Sujith Manoharan Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/hw.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c index 8e1559aba495..1829b445d0b0 100644 --- a/drivers/net/wireless/ath/ath9k/hw.c +++ b/drivers/net/wireless/ath/ath9k/hw.c @@ -1456,7 +1456,7 @@ static bool ath9k_hw_set_reset_reg(struct ath_hw *ah, u32 type) switch (type) { case ATH9K_RESET_POWER_ON: ret = ath9k_hw_set_reset_power_on(ah); - if (!ret) + if (ret) ah->reset_power_on = true; break; case ATH9K_RESET_WARM: -- cgit v1.2.3 From 16a78e9fed5e8baa8480ae3413f4328c4537c599 Mon Sep 17 00:00:00 2001 From: Thierry Escande Date: Fri, 12 Oct 2012 15:25:43 +0200 Subject: NFC: Fix nfc_llcp_local chained list insertion list_add was called with swapped parameters Signed-off-by: Thierry Escande Signed-off-by: Samuel Ortiz --- net/nfc/llcp/llcp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/nfc/llcp/llcp.c b/net/nfc/llcp/llcp.c index cc10d073c338..9e8f4b2801f6 100644 --- a/net/nfc/llcp/llcp.c +++ b/net/nfc/llcp/llcp.c @@ -1210,7 +1210,7 @@ int nfc_llcp_register_device(struct nfc_dev *ndev) local->remote_miu = LLCP_DEFAULT_MIU; local->remote_lto = LLCP_DEFAULT_LTO; - list_add(&llcp_devices, &local->list); + list_add(&local->list, &llcp_devices); return 0; } -- cgit v1.2.3 From 60ad07ab6bc86f48b6ebda1788d79ca5f88d824c Mon Sep 17 00:00:00 2001 From: Szymon Janc Date: Thu, 25 Oct 2012 17:29:45 +0200 Subject: NFC: pn533: Fix missing lock while operating on commands list In pn533_wq_cmd command was removed from list without cmd_lock held (race with pn533_send_cmd_frame_async) which could lead to list corruption. Delete command from list before releasing lock. Signed-off-by: Szymon Janc Signed-off-by: Samuel Ortiz --- drivers/nfc/pn533.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/nfc/pn533.c b/drivers/nfc/pn533.c index 97c440a8cd61..328f2b66491e 100644 --- a/drivers/nfc/pn533.c +++ b/drivers/nfc/pn533.c @@ -698,13 +698,14 @@ static void pn533_wq_cmd(struct work_struct *work) cmd = list_first_entry(&dev->cmd_queue, struct pn533_cmd, queue); + list_del(&cmd->queue); + mutex_unlock(&dev->cmd_lock); __pn533_send_cmd_frame_async(dev, cmd->out_frame, cmd->in_frame, cmd->in_frame_len, cmd->cmd_complete, cmd->arg, cmd->flags); - list_del(&cmd->queue); kfree(cmd); } -- cgit v1.2.3 From 770f750bc2b8312489c8e45306f551d08a319d3c Mon Sep 17 00:00:00 2001 From: Szymon Janc Date: Mon, 29 Oct 2012 14:04:43 +0100 Subject: NFC: pn533: Fix use after free cmd was freed in pn533_dep_link_up regardless of pn533_send_cmd_frame_async return code. Cmd is passed as argument to pn533_in_dep_link_up_complete callback and should be freed there. Signed-off-by: Szymon Janc Signed-off-by: Samuel Ortiz --- drivers/nfc/pn533.c | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-) diff --git a/drivers/nfc/pn533.c b/drivers/nfc/pn533.c index 328f2b66491e..84a2e77ab5de 100644 --- a/drivers/nfc/pn533.c +++ b/drivers/nfc/pn533.c @@ -1820,12 +1820,8 @@ static int pn533_dep_link_up(struct nfc_dev *nfc_dev, struct nfc_target *target, rc = pn533_send_cmd_frame_async(dev, dev->out_frame, dev->in_frame, dev->in_maxlen, pn533_in_dep_link_up_complete, cmd, GFP_KERNEL); - if (rc) - goto out; - - -out: - kfree(cmd); + if (rc < 0) + kfree(cmd); return rc; } -- cgit v1.2.3 From 70418e6efcf4f8652cc08e3f2ab8ae35f0948fd9 Mon Sep 17 00:00:00 2001 From: Waldemar Rymarkiewicz Date: Thu, 11 Oct 2012 14:04:00 +0200 Subject: NFC: pn533: Fix mem leak in pn533_in_dep_link_up cmd is allocated in pn533_dep_link_up and passed as an arg to pn533_send_cmd_frame_async together with a complete cb. arg is passed to the cb and must be kfreed there. Signed-off-by: Waldemar Rymarkiewicz Signed-off-by: Samuel Ortiz --- drivers/nfc/pn533.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/nfc/pn533.c b/drivers/nfc/pn533.c index 84a2e77ab5de..807bbb8e82d9 100644 --- a/drivers/nfc/pn533.c +++ b/drivers/nfc/pn533.c @@ -1679,11 +1679,14 @@ static void pn533_deactivate_target(struct nfc_dev *nfc_dev, static int pn533_in_dep_link_up_complete(struct pn533 *dev, void *arg, u8 *params, int params_len) { - struct pn533_cmd_jump_dep *cmd; struct pn533_cmd_jump_dep_response *resp; struct nfc_target nfc_target; u8 target_gt_len; int rc; + struct pn533_cmd_jump_dep *cmd = (struct pn533_cmd_jump_dep *)arg; + u8 active = cmd->active; + + kfree(arg); if (params_len == -ENOENT) { nfc_dev_dbg(&dev->interface->dev, ""); @@ -1705,7 +1708,6 @@ static int pn533_in_dep_link_up_complete(struct pn533 *dev, void *arg, } resp = (struct pn533_cmd_jump_dep_response *) params; - cmd = (struct pn533_cmd_jump_dep *) arg; rc = resp->status & PN533_CMD_RET_MASK; if (rc != PN533_CMD_RET_SUCCESS) { nfc_dev_err(&dev->interface->dev, @@ -1735,7 +1737,7 @@ static int pn533_in_dep_link_up_complete(struct pn533 *dev, void *arg, if (rc == 0) rc = nfc_dep_link_is_up(dev->nfc_dev, dev->nfc_dev->targets[0].idx, - !cmd->active, NFC_RF_INITIATOR); + !active, NFC_RF_INITIATOR); return 0; } -- cgit v1.2.3 From 5b412fd11c918171c98a253d8a3484afa9f69ca5 Mon Sep 17 00:00:00 2001 From: Thierry Escande Date: Thu, 15 Nov 2012 18:24:28 +0100 Subject: NFC: Fix pn533 target mode memory leak In target mode, sent sk_buff were not freed in pn533_tm_send_complete Signed-off-by: Thierry Escande Signed-off-by: Samuel Ortiz --- drivers/nfc/pn533.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/nfc/pn533.c b/drivers/nfc/pn533.c index 807bbb8e82d9..30ae18a03a9c 100644 --- a/drivers/nfc/pn533.c +++ b/drivers/nfc/pn533.c @@ -2077,8 +2077,12 @@ error: static int pn533_tm_send_complete(struct pn533 *dev, void *arg, u8 *params, int params_len) { + struct sk_buff *skb_out = arg; + nfc_dev_dbg(&dev->interface->dev, "%s", __func__); + dev_kfree_skb(skb_out); + if (params_len < 0) { nfc_dev_err(&dev->interface->dev, "Error %d when sending data", @@ -2116,7 +2120,7 @@ static int pn533_tm_send(struct nfc_dev *nfc_dev, struct sk_buff *skb) rc = pn533_send_cmd_frame_async(dev, out_frame, dev->in_frame, dev->in_maxlen, pn533_tm_send_complete, - NULL, GFP_KERNEL); + skb, GFP_KERNEL); if (rc) { nfc_dev_err(&dev->interface->dev, "Error %d when trying to send data", rc); -- cgit v1.2.3