From 2ebedd8d5ca8747fc7efd8a97129802bc6965468 Mon Sep 17 00:00:00 2001
From: Geert Uytterhoeven <geert+renesas@glider.be>
Date: Wed, 21 Jun 2017 22:02:33 +0200
Subject: clk: renesas: div6: Document fields used for parent selection

Add the missing documentation for the fields in struct div6_clock
related to parent selection for DIV6 clocks with selectable parents, as
found in R/SH-Mobile SoCs.

Fixes: c6d67fb037f4eaaf ("clk: shmobile: div6: support selectable-input clocks")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
 drivers/clk/renesas/clk-div6.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/clk/renesas/clk-div6.c b/drivers/clk/renesas/clk-div6.c
index 0627860233cb..3e0040c0ac87 100644
--- a/drivers/clk/renesas/clk-div6.c
+++ b/drivers/clk/renesas/clk-div6.c
@@ -29,6 +29,9 @@
  * @hw: handle between common and hardware-specific interfaces
  * @reg: IO-remapped register
  * @div: divisor value (1-64)
+ * @src_shift: Shift to access the register bits to select the parent clock
+ * @src_width: Number of register bits to select the parent clock (may be 0)
+ * @parents: Array to map from valid parent clocks indices to hardware indices
  */
 struct div6_clock {
 	struct clk_hw hw;
-- 
cgit v1.2.3


From f83fbfddd8f65ddadc0dd2b0dd7f3097d42d8def Mon Sep 17 00:00:00 2001
From: Geert Uytterhoeven <geert+renesas@glider.be>
Date: Wed, 5 Jul 2017 13:41:00 +0200
Subject: clk: renesas: r8a7792: Add IMR-LX3/LSX3 clocks

Add the module clocks for the Image Renderer Light (SRAM) Extended 3
(IMR-LX3/LSX3) Distortion Correction Engines on R-Car V2H.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
 drivers/clk/renesas/r8a7792-cpg-mssr.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/clk/renesas/r8a7792-cpg-mssr.c b/drivers/clk/renesas/r8a7792-cpg-mssr.c
index a832b9b6f7b0..7f85bbf20bf7 100644
--- a/drivers/clk/renesas/r8a7792-cpg-mssr.c
+++ b/drivers/clk/renesas/r8a7792-cpg-mssr.c
@@ -118,6 +118,13 @@ static const struct mssr_mod_clk r8a7792_mod_clks[] __initconst = {
 	DEF_MOD("vin1",			 810,	R8A7792_CLK_ZG),
 	DEF_MOD("vin0",			 811,	R8A7792_CLK_ZG),
 	DEF_MOD("etheravb",		 812,	R8A7792_CLK_HP),
+	DEF_MOD("imr-lx3",		 821,	R8A7792_CLK_ZG),
+	DEF_MOD("imr-lsx3-1",		 822,	R8A7792_CLK_ZG),
+	DEF_MOD("imr-lsx3-0",		 823,	R8A7792_CLK_ZG),
+	DEF_MOD("imr-lsx3-5",		 825,	R8A7792_CLK_ZG),
+	DEF_MOD("imr-lsx3-4",		 826,	R8A7792_CLK_ZG),
+	DEF_MOD("imr-lsx3-3",		 827,	R8A7792_CLK_ZG),
+	DEF_MOD("imr-lsx3-2",		 828,	R8A7792_CLK_ZG),
 	DEF_MOD("gyro-adc",		 901,	R8A7792_CLK_P),
 	DEF_MOD("gpio7",		 904,	R8A7792_CLK_CP),
 	DEF_MOD("gpio6",		 905,	R8A7792_CLK_CP),
-- 
cgit v1.2.3


From 371dd373c6edd557a7cfdfe10207b498ae10a014 Mon Sep 17 00:00:00 2001
From: Geert Uytterhoeven <geert+renesas@glider.be>
Date: Wed, 17 May 2017 17:25:47 +0200
Subject: clk: renesas: Allow compile-testing of all (sub)drivers

Enable compile-testing of the remaining clock drivers and subdrivers,
now dummies are available for of_clk_get_from_provider(),
of_device_compatible_match(), and rcar_rst_read_mode_pins(), and the
CPG/MSSR driver core has been converted from of_match_node() to
of_device_get_match_data().

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
 drivers/clk/renesas/Kconfig | 38 +++++++++++++++++++-------------------
 1 file changed, 19 insertions(+), 19 deletions(-)

diff --git a/drivers/clk/renesas/Kconfig b/drivers/clk/renesas/Kconfig
index 78d1df9112ba..85526ca39202 100644
--- a/drivers/clk/renesas/Kconfig
+++ b/drivers/clk/renesas/Kconfig
@@ -34,94 +34,94 @@ config CLK_EMEV2
 	bool "Emma Mobile EV2 clock support" if COMPILE_TEST
 
 config CLK_RZA1
-	bool
+	bool "RZ/A1H clock support" if COMPILE_TEST
 	select CLK_RENESAS_CPG_MSTP
 
 config CLK_R8A73A4
-	bool
+	bool "R-Mobile APE6 clock support" if COMPILE_TEST
 	select CLK_RENESAS_CPG_MSTP
 	select CLK_RENESAS_DIV6
 
 config CLK_R8A7740
-	bool
+	bool "R-Mobile A1 clock support" if COMPILE_TEST
 	select CLK_RENESAS_CPG_MSTP
 	select CLK_RENESAS_DIV6
 
 config CLK_R8A7743
-	bool
+	bool "RZ/G1M clock support" if COMPILE_TEST
 	select CLK_RCAR_GEN2_CPG
 
 config CLK_R8A7745
-	bool
+	bool "RZ/G1E clock support" if COMPILE_TEST
 	select CLK_RCAR_GEN2_CPG
 
 config CLK_R8A7778
-	bool
+	bool "R-Car M1A clock support" if COMPILE_TEST
 	select CLK_RENESAS_CPG_MSTP
 
 config CLK_R8A7779
-	bool
+	bool "R-Car H1 clock support" if COMPILE_TEST
 	select CLK_RENESAS_CPG_MSTP
 
 config CLK_R8A7790
-	bool
+	bool "R-Car H2 clock support" if COMPILE_TEST
 	select CLK_RCAR_GEN2 if CLK_RENESAS_LEGACY
 	select CLK_RCAR_GEN2_CPG
 	select CLK_RENESAS_DIV6
 
 config CLK_R8A7791
-	bool
+	bool "R-Car M2-W/N clock support" if COMPILE_TEST
 	select CLK_RCAR_GEN2 if CLK_RENESAS_LEGACY
 	select CLK_RCAR_GEN2_CPG
 	select CLK_RENESAS_DIV6
 
 config CLK_R8A7792
-	bool
+	bool "R-Car V2H clock support" if COMPILE_TEST
 	select CLK_RCAR_GEN2 if CLK_RENESAS_LEGACY
 	select CLK_RCAR_GEN2_CPG
 
 config CLK_R8A7794
-	bool
+	bool "R-Car E2 clock support" if COMPILE_TEST
 	select CLK_RCAR_GEN2 if CLK_RENESAS_LEGACY
 	select CLK_RCAR_GEN2_CPG
 	select CLK_RENESAS_DIV6
 
 config CLK_R8A7795
-	bool
+	bool "R-Car H3 clock support" if COMPILE_TEST
 	select CLK_RCAR_GEN3_CPG
 
 config CLK_R8A7796
-	bool
+	bool "R-Car M3-W clock support" if COMPILE_TEST
 	select CLK_RCAR_GEN3_CPG
 
 config CLK_SH73A0
-	bool
+	bool "SH-Mobile AG5 clock support" if COMPILE_TEST
 	select CLK_RENESAS_CPG_MSTP
 	select CLK_RENESAS_DIV6
 
 
 # Family
 config CLK_RCAR_GEN2
-	bool
+	bool "R-Car Gen2 legacy clock support" if COMPILE_TEST
 	select CLK_RENESAS_CPG_MSTP
 	select CLK_RENESAS_DIV6
 
 config CLK_RCAR_GEN2_CPG
-	bool
+	bool "R-Car Gen2 CPG clock support" if COMPILE_TEST
 	select CLK_RENESAS_CPG_MSSR
 
 config CLK_RCAR_GEN3_CPG
-	bool
+	bool "R-Car Gen3 CPG clock support" if COMPILE_TEST
 	select CLK_RENESAS_CPG_MSSR
 
 
 # Generic
 config CLK_RENESAS_CPG_MSSR
-	bool
+	bool "CPG/MSSR clock support" if COMPILE_TEST
 	select CLK_RENESAS_DIV6
 
 config CLK_RENESAS_CPG_MSTP
-	bool
+	bool "MSTP clock support" if COMPILE_TEST
 
 config CLK_RENESAS_DIV6
 	bool "DIV6 clock support" if COMPILE_TEST
-- 
cgit v1.2.3


From 6d7489c74a6ed73b4751b58b56c247bedd780a78 Mon Sep 17 00:00:00 2001
From: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Date: Wed, 21 Jun 2017 22:16:26 +0300
Subject: clk: axs10x: introduce AXS10X pll driver

AXS10X boards manages it's clocks using various PLLs. These PLL has same
dividers and corresponding control registers mapped to different addresses.
So we add one common driver for such PLLs.

Each PLL on AXS10X board consist of three dividers: IDIV, FBDIV and
ODIV. Output clock value is managed using these dividers.

We add pre-defined tables with supported rate values and appropriate
configurations of IDIV, FBDIV and ODIV for each value.

As of today we add support for PLLs that generate clock for the
following devices:
 * ARC core on AXC CPU tiles.
 * ARC PGU on ARC SDP Mainboard.
and more to come later.

By this patch we add support for two plls (arc core pll and pgu pll),
so we had to use two different init types: CLK_OF_DECLARE for arc core pll and
regular probing for pgu pll.

Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Vlad Zakharov <vzakhar@synopsys.com>
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
[sboyd@codeaurora.org: Silence dubious !x & y sparse warning,
make of_axs10x_pll_clk_setup() unregister clk on failure]
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
---
 .../devicetree/bindings/clock/snps,pll-clock.txt   |  28 ++
 MAINTAINERS                                        |   6 +
 drivers/clk/axs10x/Makefile                        |   1 +
 drivers/clk/axs10x/pll_clock.c                     | 346 +++++++++++++++++++++
 4 files changed, 381 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/clock/snps,pll-clock.txt
 create mode 100644 drivers/clk/axs10x/pll_clock.c

diff --git a/Documentation/devicetree/bindings/clock/snps,pll-clock.txt b/Documentation/devicetree/bindings/clock/snps,pll-clock.txt
new file mode 100644
index 000000000000..11fe4876612c
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/snps,pll-clock.txt
@@ -0,0 +1,28 @@
+Binding for the AXS10X Generic PLL clock
+
+This binding uses the common clock binding[1].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible: should be "snps,axs10x-<name>-pll-clock"
+  "snps,axs10x-arc-pll-clock"
+  "snps,axs10x-pgu-pll-clock"
+- reg: should always contain 2 pairs address - length: first for PLL config
+registers and second for corresponding LOCK CGU register.
+- clocks: shall be the input parent clock phandle for the PLL.
+- #clock-cells: from common clock binding; Should always be set to 0.
+
+Example:
+	input-clk: input-clk {
+		clock-frequency = <33333333>;
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+	};
+
+	core-clk: core-clk@80 {
+		compatible = "snps,axs10x-arc-pll-clock";
+		reg = <0x80 0x10>, <0x100 0x10>;
+		#clock-cells = <0>;
+		clocks = <&input-clk>;
+	};
diff --git a/MAINTAINERS b/MAINTAINERS
index 205d3977ac46..c571fcf62740 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -12745,6 +12745,12 @@ F:	arch/arc/plat-axs10x
 F:	arch/arc/boot/dts/ax*
 F:	Documentation/devicetree/bindings/arc/axs10*
 
+SYNOPSYS ARC SDP clock driver
+M:	Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
+S:	Supported
+F:	drivers/clk/axs10x/*
+F:	Documentation/devicetree/bindings/clock/snps,pll-clock.txt
+
 SYSTEM CONFIGURATION (SYSCON)
 M:	Lee Jones <lee.jones@linaro.org>
 M:	Arnd Bergmann <arnd@arndb.de>
diff --git a/drivers/clk/axs10x/Makefile b/drivers/clk/axs10x/Makefile
index 01996b871b06..d747deafbf1e 100644
--- a/drivers/clk/axs10x/Makefile
+++ b/drivers/clk/axs10x/Makefile
@@ -1 +1,2 @@
 obj-y += i2s_pll_clock.o
+obj-y += pll_clock.o
diff --git a/drivers/clk/axs10x/pll_clock.c b/drivers/clk/axs10x/pll_clock.c
new file mode 100644
index 000000000000..25d8c240ddfb
--- /dev/null
+++ b/drivers/clk/axs10x/pll_clock.c
@@ -0,0 +1,346 @@
+/*
+ * Synopsys AXS10X SDP Generic PLL clock driver
+ *
+ * Copyright (C) 2017 Synopsys
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/module.h>
+#include <linux/clk-provider.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/device.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/slab.h>
+#include <linux/of.h>
+
+/* PLL registers addresses */
+#define PLL_REG_IDIV	0x0
+#define PLL_REG_FBDIV	0x4
+#define PLL_REG_ODIV	0x8
+
+/*
+ * Bit fields of the PLL IDIV/FBDIV/ODIV registers:
+ *  ________________________________________________________________________
+ * |31                15|    14    |   13   |  12  |11         6|5         0|
+ * |-------RESRVED------|-NOUPDATE-|-BYPASS-|-EDGE-|--HIGHTIME--|--LOWTIME--|
+ * |____________________|__________|________|______|____________|___________|
+ *
+ * Following macros determine the way of access to these registers
+ * They should be set up only using the macros.
+ * reg should be an u32 variable.
+ */
+
+#define PLL_REG_GET_LOW(reg)			\
+	(((reg) & (0x3F << 0)) >> 0)
+#define PLL_REG_GET_HIGH(reg)			\
+	(((reg) & (0x3F << 6)) >> 6)
+#define PLL_REG_GET_EDGE(reg)			\
+	(((reg) & (BIT(12))) ? 1 : 0)
+#define PLL_REG_GET_BYPASS(reg)			\
+	(((reg) & (BIT(13))) ? 1 : 0)
+#define PLL_REG_GET_NOUPD(reg)			\
+	(((reg) & (BIT(14))) ? 1 : 0)
+#define PLL_REG_GET_PAD(reg)			\
+	(((reg) & (0x1FFFF << 15)) >> 15)
+
+#define PLL_REG_SET_LOW(reg, value)		\
+	{ reg |= (((value) & 0x3F) << 0); }
+#define PLL_REG_SET_HIGH(reg, value)		\
+	{ reg |= (((value) & 0x3F) << 6); }
+#define PLL_REG_SET_EDGE(reg, value)		\
+	{ reg |= (((value) & 0x01) << 12); }
+#define PLL_REG_SET_BYPASS(reg, value)		\
+	{ reg |= (((value) & 0x01) << 13); }
+#define PLL_REG_SET_NOUPD(reg, value)		\
+	{ reg |= (((value) & 0x01) << 14); }
+#define PLL_REG_SET_PAD(reg, value)		\
+	{ reg |= (((value) & 0x1FFFF) << 15); }
+
+#define PLL_LOCK	BIT(0)
+#define PLL_ERROR	BIT(1)
+#define PLL_MAX_LOCK_TIME 100 /* 100 us */
+
+struct axs10x_pll_cfg {
+	u32 rate;
+	u32 idiv;
+	u32 fbdiv;
+	u32 odiv;
+};
+
+static const struct axs10x_pll_cfg arc_pll_cfg[] = {
+	{ 33333333,  1, 1,  1 },
+	{ 50000000,  1, 30, 20 },
+	{ 75000000,  2, 45, 10 },
+	{ 90000000,  2, 54, 10 },
+	{ 100000000, 1, 30, 10 },
+	{ 125000000, 2, 45, 6 },
+	{}
+};
+
+static const struct axs10x_pll_cfg pgu_pll_cfg[] = {
+	{ 25200000, 1, 84, 90 },
+	{ 50000000, 1, 100, 54 },
+	{ 74250000, 1, 44, 16 },
+	{}
+};
+
+struct axs10x_pll_clk {
+	struct clk_hw hw;
+	void __iomem *base;
+	void __iomem *lock;
+	const struct axs10x_pll_cfg *pll_cfg;
+	struct device *dev;
+};
+
+static inline void axs10x_pll_write(struct axs10x_pll_clk *clk, u32 reg,
+				    u32 val)
+{
+	iowrite32(val, clk->base + reg);
+}
+
+static inline u32 axs10x_pll_read(struct axs10x_pll_clk *clk, u32 reg)
+{
+	return ioread32(clk->base + reg);
+}
+
+static inline struct axs10x_pll_clk *to_axs10x_pll_clk(struct clk_hw *hw)
+{
+	return container_of(hw, struct axs10x_pll_clk, hw);
+}
+
+static inline u32 axs10x_div_get_value(u32 reg)
+{
+	if (PLL_REG_GET_BYPASS(reg))
+		return 1;
+
+	return PLL_REG_GET_HIGH(reg) + PLL_REG_GET_LOW(reg);
+}
+
+static inline u32 axs10x_encode_div(unsigned int id, int upd)
+{
+	u32 div = 0;
+
+	PLL_REG_SET_LOW(div, (id % 2 == 0) ? id >> 1 : (id >> 1) + 1);
+	PLL_REG_SET_HIGH(div, id >> 1);
+	PLL_REG_SET_EDGE(div, id % 2);
+	PLL_REG_SET_BYPASS(div, id == 1 ? 1 : 0);
+	PLL_REG_SET_NOUPD(div, upd == 0 ? 1 : 0);
+
+	return div;
+}
+
+static unsigned long axs10x_pll_recalc_rate(struct clk_hw *hw,
+					    unsigned long parent_rate)
+{
+	u64 rate;
+	u32 idiv, fbdiv, odiv;
+	struct axs10x_pll_clk *clk = to_axs10x_pll_clk(hw);
+
+	idiv = axs10x_div_get_value(axs10x_pll_read(clk, PLL_REG_IDIV));
+	fbdiv = axs10x_div_get_value(axs10x_pll_read(clk, PLL_REG_FBDIV));
+	odiv = axs10x_div_get_value(axs10x_pll_read(clk, PLL_REG_ODIV));
+
+	rate = (u64)parent_rate * fbdiv;
+	do_div(rate, idiv * odiv);
+
+	return rate;
+}
+
+static long axs10x_pll_round_rate(struct clk_hw *hw, unsigned long rate,
+				  unsigned long *prate)
+{
+	int i;
+	long best_rate;
+	struct axs10x_pll_clk *clk = to_axs10x_pll_clk(hw);
+	const struct axs10x_pll_cfg *pll_cfg = clk->pll_cfg;
+
+	if (pll_cfg[0].rate == 0)
+		return -EINVAL;
+
+	best_rate = pll_cfg[0].rate;
+
+	for (i = 1; pll_cfg[i].rate != 0; i++) {
+		if (abs(rate - pll_cfg[i].rate) < abs(rate - best_rate))
+			best_rate = pll_cfg[i].rate;
+	}
+
+	return best_rate;
+}
+
+static int axs10x_pll_set_rate(struct clk_hw *hw, unsigned long rate,
+			       unsigned long parent_rate)
+{
+	int i;
+	struct axs10x_pll_clk *clk = to_axs10x_pll_clk(hw);
+	const struct axs10x_pll_cfg *pll_cfg = clk->pll_cfg;
+
+	for (i = 0; pll_cfg[i].rate != 0; i++) {
+		if (pll_cfg[i].rate == rate) {
+			axs10x_pll_write(clk, PLL_REG_IDIV,
+					 axs10x_encode_div(pll_cfg[i].idiv, 0));
+			axs10x_pll_write(clk, PLL_REG_FBDIV,
+					 axs10x_encode_div(pll_cfg[i].fbdiv, 0));
+			axs10x_pll_write(clk, PLL_REG_ODIV,
+					 axs10x_encode_div(pll_cfg[i].odiv, 1));
+
+			/*
+			 * Wait until CGU relocks and check error status.
+			 * If after timeout CGU is unlocked yet return error
+			 */
+			udelay(PLL_MAX_LOCK_TIME);
+			if (!(ioread32(clk->lock) & PLL_LOCK))
+				return -ETIMEDOUT;
+
+			if (ioread32(clk->lock) & PLL_ERROR)
+				return -EINVAL;
+
+			return 0;
+		}
+	}
+
+	dev_err(clk->dev, "invalid rate=%ld, parent_rate=%ld\n", rate,
+			parent_rate);
+	return -EINVAL;
+}
+
+static const struct clk_ops axs10x_pll_ops = {
+	.recalc_rate = axs10x_pll_recalc_rate,
+	.round_rate = axs10x_pll_round_rate,
+	.set_rate = axs10x_pll_set_rate,
+};
+
+static int axs10x_pll_clk_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	const char *parent_name;
+	struct axs10x_pll_clk *pll_clk;
+	struct resource *mem;
+	struct clk_init_data init = { };
+	int ret;
+
+	pll_clk = devm_kzalloc(dev, sizeof(*pll_clk), GFP_KERNEL);
+	if (!pll_clk)
+		return -ENOMEM;
+
+	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	pll_clk->base = devm_ioremap_resource(dev, mem);
+	if (IS_ERR(pll_clk->base))
+		return PTR_ERR(pll_clk->base);
+
+	mem = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	pll_clk->lock = devm_ioremap_resource(dev, mem);
+	if (IS_ERR(pll_clk->lock))
+		return PTR_ERR(pll_clk->lock);
+
+	init.name = dev->of_node->name;
+	init.ops = &axs10x_pll_ops;
+	parent_name = of_clk_get_parent_name(dev->of_node, 0);
+	init.parent_names = &parent_name;
+	init.num_parents = 1;
+	pll_clk->hw.init = &init;
+	pll_clk->dev = dev;
+	pll_clk->pll_cfg = of_device_get_match_data(dev);
+
+	if (!pll_clk->pll_cfg) {
+		dev_err(dev, "No OF match data provided\n");
+		return -EINVAL;
+	}
+
+	ret = devm_clk_hw_register(dev, &pll_clk->hw);
+	if (ret) {
+		dev_err(dev, "failed to register %s clock\n", init.name);
+		return ret;
+	}
+
+	return of_clk_add_hw_provider(dev->of_node, of_clk_hw_simple_get,
+			&pll_clk->hw);
+}
+
+static int axs10x_pll_clk_remove(struct platform_device *pdev)
+{
+	of_clk_del_provider(pdev->dev.of_node);
+	return 0;
+}
+
+static void __init of_axs10x_pll_clk_setup(struct device_node *node)
+{
+	const char *parent_name;
+	struct axs10x_pll_clk *pll_clk;
+	struct clk_init_data init = { };
+	int ret;
+
+	pll_clk = kzalloc(sizeof(*pll_clk), GFP_KERNEL);
+	if (!pll_clk)
+		return;
+
+	pll_clk->base = of_iomap(node, 0);
+	if (!pll_clk->base) {
+		pr_err("failed to map pll div registers\n");
+		goto err_free_pll_clk;
+	}
+
+	pll_clk->lock = of_iomap(node, 1);
+	if (!pll_clk->lock) {
+		pr_err("failed to map pll lock register\n");
+		goto err_unmap_base;
+	}
+
+	init.name = node->name;
+	init.ops = &axs10x_pll_ops;
+	parent_name = of_clk_get_parent_name(node, 0);
+	init.parent_names = &parent_name;
+	init.num_parents = parent_name ? 1 : 0;
+	pll_clk->hw.init = &init;
+	pll_clk->pll_cfg = arc_pll_cfg;
+
+	ret = clk_hw_register(NULL, &pll_clk->hw);
+	if (ret) {
+		pr_err("failed to register %s clock\n", node->name);
+		goto err_unmap_lock;
+	}
+
+	ret = of_clk_add_hw_provider(node, of_clk_hw_simple_get, &pll_clk->hw);
+	if (ret) {
+		pr_err("failed to add hw provider for %s clock\n", node->name);
+		goto err_unregister_clk;
+	}
+
+	return;
+
+err_unregister_clk:
+	clk_hw_unregister(&pll_clk->hw);
+err_unmap_lock:
+	iounmap(pll_clk->lock);
+err_unmap_base:
+	iounmap(pll_clk->base);
+err_free_pll_clk:
+	kfree(pll_clk);
+}
+CLK_OF_DECLARE(axs10x_pll_clock, "snps,axs10x-arc-pll-clock",
+	       of_axs10x_pll_clk_setup);
+
+static const struct of_device_id axs10x_pll_clk_id[] = {
+	{ .compatible = "snps,axs10x-pgu-pll-clock", .data = &pgu_pll_cfg},
+	{ }
+};
+MODULE_DEVICE_TABLE(of, axs10x_pll_clk_id);
+
+static struct platform_driver axs10x_pll_clk_driver = {
+	.driver = {
+		.name = "axs10x-pll-clock",
+		.of_match_table = axs10x_pll_clk_id,
+	},
+	.probe = axs10x_pll_clk_probe,
+	.remove = axs10x_pll_clk_remove,
+};
+builtin_platform_driver(axs10x_pll_clk_driver);
+
+MODULE_AUTHOR("Vlad Zakharov <vzakhar@synopsys.com>");
+MODULE_DESCRIPTION("Synopsys AXS10X SDP Generic PLL Clock Driver");
+MODULE_LICENSE("GPL v2");
-- 
cgit v1.2.3


From 3bded569cab4d839a47fcbd83e4e8926ae6ddad5 Mon Sep 17 00:00:00 2001
From: Marek Vasut <marek.vasut@gmail.com>
Date: Sun, 9 Jul 2017 15:28:07 +0200
Subject: clk: vc5: Prevent division by zero on unconfigured outputs

In case the initial values of the FOD registers are not configured in
the OTP or by the bootloader, it is possible that the FOD registers
will contain zeroes. The code in vc5_fod_recalc_rate() immediately
feeds the FOD divider value obtained from the FOD registers into the
div64_u64() and if the FOD divider value is zero, triggers division
by zero exception.

Check if the FOD divider value is zero and return the frequency of
the FOD output as 0 Hz if it is so. This prevents the division by
zero exception.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Alexey Firago <alexey_firago@mentor.com>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: linux-renesas-soc@vger.kernel.org
Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> # Salvator-XS with the display LVDS output.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
---
 drivers/clk/clk-versaclock5.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/clk/clk-versaclock5.c b/drivers/clk/clk-versaclock5.c
index ea7d552a2f2b..194d3f420847 100644
--- a/drivers/clk/clk-versaclock5.c
+++ b/drivers/clk/clk-versaclock5.c
@@ -426,6 +426,10 @@ static unsigned long vc5_fod_recalc_rate(struct clk_hw *hw,
 	div_frc = (od_frc[0] << 22) | (od_frc[1] << 14) |
 		  (od_frc[2] << 6) | (od_frc[3] >> 2);
 
+	/* Avoid division by zero if the output is not configured. */
+	if (div_int == 0 && div_frc == 0)
+		return 0;
+
 	/* The PLL divider has 12 integer bits and 30 fractional bits */
 	return div64_u64((u64)f_in << 24ULL, ((u64)div_int << 24ULL) + div_frc);
 }
-- 
cgit v1.2.3


From a4decf5899c8073e9ec5631b720d6054f349a8ab Mon Sep 17 00:00:00 2001
From: Marek Vasut <marek.vasut@gmail.com>
Date: Sun, 9 Jul 2017 15:28:08 +0200
Subject: clk: vc5: Fix trivial typo

Fix trivial typo in vc5_clk_out_unprepare() , s/Enable/Disable/ .

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Alexey Firago <alexey_firago@mentor.com>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: linux-renesas-soc@vger.kernel.org
Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> # Salvator-XS with the display LVDS output.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
---
 drivers/clk/clk-versaclock5.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/clk/clk-versaclock5.c b/drivers/clk/clk-versaclock5.c
index 194d3f420847..b70c2e684de6 100644
--- a/drivers/clk/clk-versaclock5.c
+++ b/drivers/clk/clk-versaclock5.c
@@ -520,7 +520,7 @@ static void vc5_clk_out_unprepare(struct clk_hw *hw)
 	struct vc5_hw_data *hwdata = container_of(hw, struct vc5_hw_data, hw);
 	struct vc5_driver_data *vc5 = hwdata->vc5;
 
-	/* Enable the clock buffer */
+	/* Disable the clock buffer */
 	regmap_update_bits(vc5->regmap, VC5_CLK_OUTPUT_CFG(hwdata->num, 1),
 			   VC5_CLK_OUTPUT_CFG1_EN_CLKBUF, 0);
 }
-- 
cgit v1.2.3


From 325b7b90f9a87a4bdee7059d10bd98a11154ceae Mon Sep 17 00:00:00 2001
From: Marek Vasut <marek.vasut@gmail.com>
Date: Sun, 9 Jul 2017 15:28:09 +0200
Subject: clk: vc5: Do not warn about disabled output buffer input muxes

The output buffer input mux can be configured in either of three
states -- disabled, input from FOD, input from previous output.
If the output buffer input mux is set to disabled, the code in
vc5_clk_out_get_parent() would consider this an invalid setting
and warn about it, which is not necessarily the case.

In case the output buffer input mux is disabled, default to input
from FOD to have some parent and don't print the warning.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Alexey Firago <alexey_firago@mentor.com>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: linux-renesas-soc@vger.kernel.org
Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> # Salvator-XS with the display LVDS output.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
---
 drivers/clk/clk-versaclock5.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/clk/clk-versaclock5.c b/drivers/clk/clk-versaclock5.c
index b70c2e684de6..185d7a5d36e0 100644
--- a/drivers/clk/clk-versaclock5.c
+++ b/drivers/clk/clk-versaclock5.c
@@ -541,6 +541,9 @@ static unsigned char vc5_clk_out_get_parent(struct clk_hw *hw)
 	regmap_read(vc5->regmap, VC5_OUT_DIV_CONTROL(hwdata->num), &src);
 	src &= mask;
 
+	if (src == 0)	/* Input mux set to DISABLED */
+		return 0;
+
 	if ((src & fodclkmask) == VC5_OUT_DIV_CONTROL_EN_FOD)
 		return 0;
 
-- 
cgit v1.2.3


From 718f4694ea15a1033f48ea2e44f6428df705a1a8 Mon Sep 17 00:00:00 2001
From: Marek Vasut <marek.vasut@gmail.com>
Date: Sun, 9 Jul 2017 15:28:10 +0200
Subject: clk: vc5: Configure the output buffer input mux on prepare

The output buffer input mux can be configured in either of three
states -- disabled, input from FOD, input from previous output.
Once the .prepare() callback of the output buffer is called, the
output buffer input mux must be set to either input from FOD or
input from previous output, it cannot be set to Disabled anymore
or the output won't work.

Default to the input from FOD if the output buffer input mux was
Disabled and the .prepare() was called on it.

Note that we do not set the output buffer input mux back to Disabled
in the .unprepare() callback as there is no obvious benefit of doing
so. We disable the entire output buffer in the .unprepare() callback
already.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Alexey Firago <alexey_firago@mentor.com>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: linux-renesas-soc@vger.kernel.org
Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> # Salvator-XS with the display LVDS output.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
---
 drivers/clk/clk-versaclock5.c | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

diff --git a/drivers/clk/clk-versaclock5.c b/drivers/clk/clk-versaclock5.c
index 185d7a5d36e0..29df1100f96d 100644
--- a/drivers/clk/clk-versaclock5.c
+++ b/drivers/clk/clk-versaclock5.c
@@ -507,6 +507,25 @@ static int vc5_clk_out_prepare(struct clk_hw *hw)
 {
 	struct vc5_hw_data *hwdata = container_of(hw, struct vc5_hw_data, hw);
 	struct vc5_driver_data *vc5 = hwdata->vc5;
+	const u8 mask = VC5_OUT_DIV_CONTROL_SELB_NORM |
+			VC5_OUT_DIV_CONTROL_SEL_EXT |
+			VC5_OUT_DIV_CONTROL_EN_FOD;
+	unsigned int src;
+	int ret;
+
+	/*
+	 * If the input mux is disabled, enable it first and
+	 * select source from matching FOD.
+	 */
+	regmap_read(vc5->regmap, VC5_OUT_DIV_CONTROL(hwdata->num), &src);
+	if ((src & mask) == 0) {
+		src = VC5_OUT_DIV_CONTROL_RESET | VC5_OUT_DIV_CONTROL_EN_FOD;
+		ret = regmap_update_bits(vc5->regmap,
+					 VC5_OUT_DIV_CONTROL(hwdata->num),
+					 mask | VC5_OUT_DIV_CONTROL_RESET, src);
+		if (ret)
+			return ret;
+	}
 
 	/* Enable the clock buffer */
 	regmap_update_bits(vc5->regmap, VC5_CLK_OUTPUT_CFG(hwdata->num, 1),
-- 
cgit v1.2.3


From 55997db52e997ea7fd8b036966c1f1943fc32a6f Mon Sep 17 00:00:00 2001
From: Marek Vasut <marek.vasut@gmail.com>
Date: Sun, 9 Jul 2017 15:28:11 +0200
Subject: clk: vc5: Split clock input mux and predivider

Split the VC5 clock input mux and the predivider to more accurately
model the hardware and fix the previously incorrect assumption that
both the OUT_SEL_I2CB and the PLL are fed from the predivider.

It is in fact the clock input mux output which is directly feeding
the clock into the OUT_SEL_I2CB output, while the clock input mux
output first passes through the predivider before it is fed into
the PLL.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Alexey Firago <alexey_firago@mentor.com>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: linux-renesas-soc@vger.kernel.org
Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
on Salvator-XS with the display LVDS output.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
---
 drivers/clk/clk-versaclock5.c | 46 ++++++++++++++++++++++++++++++++-----------
 1 file changed, 34 insertions(+), 12 deletions(-)

diff --git a/drivers/clk/clk-versaclock5.c b/drivers/clk/clk-versaclock5.c
index 29df1100f96d..cae07267a884 100644
--- a/drivers/clk/clk-versaclock5.c
+++ b/drivers/clk/clk-versaclock5.c
@@ -157,6 +157,7 @@ struct vc5_driver_data {
 	struct clk		*pin_clkin;
 	unsigned char		clk_mux_ins;
 	struct clk_hw		clk_mux;
+	struct clk_hw		clk_pfd;
 	struct vc5_hw_data	clk_pll;
 	struct vc5_hw_data	clk_fod[VC5_MAX_FOD_NUM];
 	struct vc5_hw_data	clk_out[VC5_MAX_CLK_OUT_NUM];
@@ -166,6 +167,10 @@ static const char * const vc5_mux_names[] = {
 	"mux"
 };
 
+static const char * const vc5_pfd_names[] = {
+	"pfd"
+};
+
 static const char * const vc5_pll_names[] = {
 	"pll"
 };
@@ -254,11 +259,16 @@ static int vc5_mux_set_parent(struct clk_hw *hw, u8 index)
 	return regmap_update_bits(vc5->regmap, VC5_PRIM_SRC_SHDN, mask, src);
 }
 
-static unsigned long vc5_mux_recalc_rate(struct clk_hw *hw,
+static const struct clk_ops vc5_mux_ops = {
+	.set_parent	= vc5_mux_set_parent,
+	.get_parent	= vc5_mux_get_parent,
+};
+
+static unsigned long vc5_pfd_recalc_rate(struct clk_hw *hw,
 					 unsigned long parent_rate)
 {
 	struct vc5_driver_data *vc5 =
-		container_of(hw, struct vc5_driver_data, clk_mux);
+		container_of(hw, struct vc5_driver_data, clk_pfd);
 	unsigned int prediv, div;
 
 	regmap_read(vc5->regmap, VC5_VCO_CTRL_AND_PREDIV, &prediv);
@@ -276,7 +286,7 @@ static unsigned long vc5_mux_recalc_rate(struct clk_hw *hw,
 		return parent_rate / VC5_REF_DIVIDER_REF_DIV(div);
 }
 
-static long vc5_mux_round_rate(struct clk_hw *hw, unsigned long rate,
+static long vc5_pfd_round_rate(struct clk_hw *hw, unsigned long rate,
 			       unsigned long *parent_rate)
 {
 	unsigned long idiv;
@@ -296,11 +306,11 @@ static long vc5_mux_round_rate(struct clk_hw *hw, unsigned long rate,
 	return *parent_rate / idiv;
 }
 
-static int vc5_mux_set_rate(struct clk_hw *hw, unsigned long rate,
+static int vc5_pfd_set_rate(struct clk_hw *hw, unsigned long rate,
 			    unsigned long parent_rate)
 {
 	struct vc5_driver_data *vc5 =
-		container_of(hw, struct vc5_driver_data, clk_mux);
+		container_of(hw, struct vc5_driver_data, clk_pfd);
 	unsigned long idiv;
 	u8 div;
 
@@ -328,12 +338,10 @@ static int vc5_mux_set_rate(struct clk_hw *hw, unsigned long rate,
 	return 0;
 }
 
-static const struct clk_ops vc5_mux_ops = {
-	.set_parent	= vc5_mux_set_parent,
-	.get_parent	= vc5_mux_get_parent,
-	.recalc_rate	= vc5_mux_recalc_rate,
-	.round_rate	= vc5_mux_round_rate,
-	.set_rate	= vc5_mux_set_rate,
+static const struct clk_ops vc5_pfd_ops = {
+	.recalc_rate	= vc5_pfd_recalc_rate,
+	.round_rate	= vc5_pfd_round_rate,
+	.set_rate	= vc5_pfd_set_rate,
 };
 
 /*
@@ -698,12 +706,26 @@ static int vc5_probe(struct i2c_client *client,
 		goto err_clk;
 	}
 
+	/* Register PFD */
+	memset(&init, 0, sizeof(init));
+	init.name = vc5_pfd_names[0];
+	init.ops = &vc5_pfd_ops;
+	init.flags = CLK_SET_RATE_PARENT;
+	init.parent_names = vc5_mux_names;
+	init.num_parents = 1;
+	vc5->clk_pfd.init = &init;
+	ret = devm_clk_hw_register(&client->dev, &vc5->clk_pfd);
+	if (ret) {
+		dev_err(&client->dev, "unable to register %s\n", init.name);
+		goto err_clk;
+	}
+
 	/* Register PLL */
 	memset(&init, 0, sizeof(init));
 	init.name = vc5_pll_names[0];
 	init.ops = &vc5_pll_ops;
 	init.flags = CLK_SET_RATE_PARENT;
-	init.parent_names = vc5_mux_names;
+	init.parent_names = vc5_pfd_names;
 	init.num_parents = 1;
 	vc5->clk_pll.num = 0;
 	vc5->clk_pll.vc5 = vc5;
-- 
cgit v1.2.3


From 8c1ebe9762670159ca982167131af63c94ff1571 Mon Sep 17 00:00:00 2001
From: Marek Vasut <marek.vasut@gmail.com>
Date: Sun, 9 Jul 2017 15:28:12 +0200
Subject: clk: vc5: Add support for the input frequency doubler

The VersaClock 6 has an input frequency doubler between the input
clock mux and the predivider. Add new capability flag and support
for this frequency doubler block into the driver.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Alexey Firago <alexey_firago@mentor.com>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: linux-renesas-soc@vger.kernel.org
Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
on Salvator-XS with the display LVDS output.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
---
 drivers/clk/clk-versaclock5.c | 78 ++++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 77 insertions(+), 1 deletion(-)

diff --git a/drivers/clk/clk-versaclock5.c b/drivers/clk/clk-versaclock5.c
index cae07267a884..2bdd456f89e4 100644
--- a/drivers/clk/clk-versaclock5.c
+++ b/drivers/clk/clk-versaclock5.c
@@ -57,6 +57,7 @@
 #define VC5_PRIM_SRC_SHDN			0x10
 #define VC5_PRIM_SRC_SHDN_EN_XTAL		BIT(7)
 #define VC5_PRIM_SRC_SHDN_EN_CLKIN		BIT(6)
+#define VC5_PRIM_SRC_SHDN_EN_DOUBLE_XTAL_FREQ	BIT(3)
 #define VC5_PRIM_SRC_SHDN_SP			BIT(1)
 #define VC5_PRIM_SRC_SHDN_EN_GBL_SHDN		BIT(0)
 
@@ -122,6 +123,8 @@
 /* flags to describe chip features */
 /* chip has built-in oscilator */
 #define VC5_HAS_INTERNAL_XTAL	BIT(0)
+/* chip has PFD requency doubler */
+#define VC5_HAS_PFD_FREQ_DBL	BIT(1)
 
 /* Supported IDT VC5 models. */
 enum vc5_model {
@@ -157,6 +160,7 @@ struct vc5_driver_data {
 	struct clk		*pin_clkin;
 	unsigned char		clk_mux_ins;
 	struct clk_hw		clk_mux;
+	struct clk_hw		clk_mul;
 	struct clk_hw		clk_pfd;
 	struct vc5_hw_data	clk_pll;
 	struct vc5_hw_data	clk_fod[VC5_MAX_FOD_NUM];
@@ -167,6 +171,10 @@ static const char * const vc5_mux_names[] = {
 	"mux"
 };
 
+static const char * const vc5_dbl_names[] = {
+	"dbl"
+};
+
 static const char * const vc5_pfd_names[] = {
 	"pfd"
 };
@@ -264,6 +272,54 @@ static const struct clk_ops vc5_mux_ops = {
 	.get_parent	= vc5_mux_get_parent,
 };
 
+static unsigned long vc5_dbl_recalc_rate(struct clk_hw *hw,
+					 unsigned long parent_rate)
+{
+	struct vc5_driver_data *vc5 =
+		container_of(hw, struct vc5_driver_data, clk_mul);
+	unsigned int premul;
+
+	regmap_read(vc5->regmap, VC5_PRIM_SRC_SHDN, &premul);
+	if (premul & VC5_PRIM_SRC_SHDN_EN_DOUBLE_XTAL_FREQ)
+		parent_rate *= 2;
+
+	return parent_rate;
+}
+
+static long vc5_dbl_round_rate(struct clk_hw *hw, unsigned long rate,
+			       unsigned long *parent_rate)
+{
+	if ((*parent_rate == rate) || ((*parent_rate * 2) == rate))
+		return rate;
+	else
+		return -EINVAL;
+}
+
+static int vc5_dbl_set_rate(struct clk_hw *hw, unsigned long rate,
+			    unsigned long parent_rate)
+{
+	struct vc5_driver_data *vc5 =
+		container_of(hw, struct vc5_driver_data, clk_mul);
+	u32 mask;
+
+	if ((parent_rate * 2) == rate)
+		mask = VC5_PRIM_SRC_SHDN_EN_DOUBLE_XTAL_FREQ;
+	else
+		mask = 0;
+
+	regmap_update_bits(vc5->regmap, VC5_PRIM_SRC_SHDN,
+			   VC5_PRIM_SRC_SHDN_EN_DOUBLE_XTAL_FREQ,
+			   mask);
+
+	return 0;
+}
+
+static const struct clk_ops vc5_dbl_ops = {
+	.recalc_rate	= vc5_dbl_recalc_rate,
+	.round_rate	= vc5_dbl_round_rate,
+	.set_rate	= vc5_dbl_set_rate,
+};
+
 static unsigned long vc5_pfd_recalc_rate(struct clk_hw *hw,
 					 unsigned long parent_rate)
 {
@@ -706,12 +762,32 @@ static int vc5_probe(struct i2c_client *client,
 		goto err_clk;
 	}
 
+	if (vc5->chip_info->flags & VC5_HAS_PFD_FREQ_DBL) {
+		/* Register frequency doubler */
+		memset(&init, 0, sizeof(init));
+		init.name = vc5_dbl_names[0];
+		init.ops = &vc5_dbl_ops;
+		init.flags = CLK_SET_RATE_PARENT;
+		init.parent_names = vc5_mux_names;
+		init.num_parents = 1;
+		vc5->clk_mul.init = &init;
+		ret = devm_clk_hw_register(&client->dev, &vc5->clk_mul);
+		if (ret) {
+			dev_err(&client->dev, "unable to register %s\n",
+				init.name);
+			goto err_clk;
+		}
+	}
+
 	/* Register PFD */
 	memset(&init, 0, sizeof(init));
 	init.name = vc5_pfd_names[0];
 	init.ops = &vc5_pfd_ops;
 	init.flags = CLK_SET_RATE_PARENT;
-	init.parent_names = vc5_mux_names;
+	if (vc5->chip_info->flags & VC5_HAS_PFD_FREQ_DBL)
+		init.parent_names = vc5_dbl_names;
+	else
+		init.parent_names = vc5_mux_names;
 	init.num_parents = 1;
 	vc5->clk_pfd.init = &init;
 	ret = devm_clk_hw_register(&client->dev, &vc5->clk_pfd);
-- 
cgit v1.2.3


From 73100e79c7368dd30c06bcfc04252bab5dc48783 Mon Sep 17 00:00:00 2001
From: Marek Vasut <marek.vasut@gmail.com>
Date: Sun, 9 Jul 2017 15:28:13 +0200
Subject: clk: vc5: Add bindings for IDT VersaClock 5P49V6901

IDT VersaClock 6 5P49V6901 has 4 clock outputs, 4 fractional dividers.
Input clock source can be taken from either external crystal or from
external reference clock.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Alexey Firago <alexey_firago@mentor.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: linux-renesas-soc@vger.kernel.org
Cc: devicetree@vger.kernel.org
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
---
 .../devicetree/bindings/clock/idt,versaclock5.txt  | 26 ++++++++++++++++------
 1 file changed, 19 insertions(+), 7 deletions(-)

diff --git a/Documentation/devicetree/bindings/clock/idt,versaclock5.txt b/Documentation/devicetree/bindings/clock/idt,versaclock5.txt
index 53d7e50ed875..66ef0a009b95 100644
--- a/Documentation/devicetree/bindings/clock/idt,versaclock5.txt
+++ b/Documentation/devicetree/bindings/clock/idt,versaclock5.txt
@@ -1,24 +1,29 @@
-Binding for IDT VersaClock5 programmable i2c clock generator.
+Binding for IDT VersaClock 5,6 programmable i2c clock generators.
 
-The IDT VersaClock5 are programmable i2c clock generators providing
-from 3 to 12 output clocks.
+The IDT VersaClock 5 and VersaClock 6 are programmable i2c clock
+generators providing from 3 to 12 output clocks.
 
 ==I2C device node==
 
 Required properties:
-- compatible:	shall be one of "idt,5p49v5923" , "idt,5p49v5933" ,
-		"idt,5p49v5935".
+- compatible:	shall be one of
+		"idt,5p49v5923"
+		"idt,5p49v5933"
+		"idt,5p49v5935"
+		"idt,5p49v6901"
 - reg:		i2c device address, shall be 0x68 or 0x6a.
 - #clock-cells:	from common clock binding; shall be set to 1.
 - clocks:	from common clock binding; list of parent clock handles,
-		- 5p49v5923: (required) either or both of XTAL or CLKIN
+		- 5p49v5923 and
+		  5p49v6901: (required) either or both of XTAL or CLKIN
 					reference clock.
 		- 5p49v5933 and
 		- 5p49v5935: (optional) property not present (internal
 					Xtal used) or CLKIN reference
 					clock.
 - clock-names:	from common clock binding; clock input names, can be
-		- 5p49v5923: (required) either or both of "xin", "clkin".
+		- 5p49v5923 and
+		  5p49v6901: (required) either or both of "xin", "clkin".
 		- 5p49v5933 and
 		- 5p49v5935: (optional) property not present or "clkin".
 
@@ -44,6 +49,13 @@ clock specifier, the following mapping applies:
 	3 -- OUT3
 	4 -- OUT4
 
+5P49V6901:
+	0 -- OUT0_SEL_I2CB
+	1 -- OUT1
+	2 -- OUT2
+	3 -- OUT3
+	4 -- OUT4
+
 ==Example==
 
 /* 25MHz reference crystal */
-- 
cgit v1.2.3


From dbf6b16f56830c995515e0d7350e9c639e6d186f Mon Sep 17 00:00:00 2001
From: Marek Vasut <marek.vasut@gmail.com>
Date: Sun, 9 Jul 2017 15:28:14 +0200
Subject: clk: vc5: Add support for IDT VersaClock 5P49V6901

Update IDT VersaClock 5 driver to support IDT VersaClock 6 5P49V6901.
This chip has two clock inputs (external XTAL or external CLKIN), four
fractional dividers (FODs) and five clock outputs (four universal clock
outputs and one reference clock output at OUT0_SELB_I2C).

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Alexey Firago <alexey_firago@mentor.com>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: linux-renesas-soc@vger.kernel.org
Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
on Salvator-XS with the display LVDS output.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
---
 drivers/clk/Kconfig           |  6 +++---
 drivers/clk/clk-versaclock5.c | 11 +++++++++++
 2 files changed, 14 insertions(+), 3 deletions(-)

diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
index 68ca2d9fcd73..a874b72612d0 100644
--- a/drivers/clk/Kconfig
+++ b/drivers/clk/Kconfig
@@ -210,14 +210,14 @@ config COMMON_CLK_OXNAS
 	  Support for the OXNAS SoC Family clocks.
 
 config COMMON_CLK_VC5
-	tristate "Clock driver for IDT VersaClock5 devices"
+	tristate "Clock driver for IDT VersaClock 5,6 devices"
 	depends on I2C
 	depends on OF
 	select REGMAP_I2C
 	help
 	---help---
-	  This driver supports the IDT VersaClock5 programmable clock
-	  generator.
+	  This driver supports the IDT VersaClock 5 and VersaClock 6
+	  programmable clock generators.
 
 source "drivers/clk/bcm/Kconfig"
 source "drivers/clk/hisilicon/Kconfig"
diff --git a/drivers/clk/clk-versaclock5.c b/drivers/clk/clk-versaclock5.c
index 2bdd456f89e4..e4c36dfdc851 100644
--- a/drivers/clk/clk-versaclock5.c
+++ b/drivers/clk/clk-versaclock5.c
@@ -131,6 +131,7 @@ enum vc5_model {
 	IDT_VC5_5P49V5923,
 	IDT_VC5_5P49V5933,
 	IDT_VC5_5P49V5935,
+	IDT_VC6_5P49V6901,
 };
 
 /* Structure to describe features of a particular VC5 model */
@@ -686,6 +687,7 @@ static int vc5_map_index_to_output(const enum vc5_model model,
 		return (n == 0) ? 0 : 3;
 	case IDT_VC5_5P49V5923:
 	case IDT_VC5_5P49V5935:
+	case IDT_VC6_5P49V6901:
 	default:
 		return n;
 	}
@@ -923,10 +925,18 @@ static const struct vc5_chip_info idt_5p49v5935_info = {
 	.flags = VC5_HAS_INTERNAL_XTAL,
 };
 
+static const struct vc5_chip_info idt_5p49v6901_info = {
+	.model = IDT_VC6_5P49V6901,
+	.clk_fod_cnt = 4,
+	.clk_out_cnt = 5,
+	.flags = VC5_HAS_PFD_FREQ_DBL,
+};
+
 static const struct i2c_device_id vc5_id[] = {
 	{ "5p49v5923", .driver_data = IDT_VC5_5P49V5923 },
 	{ "5p49v5933", .driver_data = IDT_VC5_5P49V5933 },
 	{ "5p49v5935", .driver_data = IDT_VC5_5P49V5935 },
+	{ "5p49v6901", .driver_data = IDT_VC6_5P49V6901 },
 	{ }
 };
 MODULE_DEVICE_TABLE(i2c, vc5_id);
@@ -935,6 +945,7 @@ static const struct of_device_id clk_vc5_of_match[] = {
 	{ .compatible = "idt,5p49v5923", .data = &idt_5p49v5923_info },
 	{ .compatible = "idt,5p49v5933", .data = &idt_5p49v5933_info },
 	{ .compatible = "idt,5p49v5935", .data = &idt_5p49v5935_info },
+	{ .compatible = "idt,5p49v6901", .data = &idt_5p49v6901_info },
 	{ },
 };
 MODULE_DEVICE_TABLE(of, clk_vc5_of_match);
-- 
cgit v1.2.3


From b191155541f2a4cfbe62697c8d65919549f948c0 Mon Sep 17 00:00:00 2001
From: Vladimir Barinov <vladimir.barinov+renesas@cogentembedded.com>
Date: Sun, 9 Jul 2017 20:39:57 +0300
Subject: clk: vc5: Add support for IDT VersaClock 5P49V5925

Update IDT VersaClock 5 driver to support 5P49V5925. This chip has only
external clock input, four fractional dividers (FODs) and five clock
outputs (four universal clock outputs and one reference clock output at
OUT0_SELB_I2C).

Signed-off-by: Vladimir Barinov <vladimir.barinov+renesas@cogentembedded.com>
Reviewed-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
---
 drivers/clk/clk-versaclock5.c | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/drivers/clk/clk-versaclock5.c b/drivers/clk/clk-versaclock5.c
index e4c36dfdc851..decffb3826ec 100644
--- a/drivers/clk/clk-versaclock5.c
+++ b/drivers/clk/clk-versaclock5.c
@@ -129,6 +129,7 @@
 /* Supported IDT VC5 models. */
 enum vc5_model {
 	IDT_VC5_5P49V5923,
+	IDT_VC5_5P49V5925,
 	IDT_VC5_5P49V5933,
 	IDT_VC5_5P49V5935,
 	IDT_VC6_5P49V6901,
@@ -686,6 +687,7 @@ static int vc5_map_index_to_output(const enum vc5_model model,
 	case IDT_VC5_5P49V5933:
 		return (n == 0) ? 0 : 3;
 	case IDT_VC5_5P49V5923:
+	case IDT_VC5_5P49V5925:
 	case IDT_VC5_5P49V5935:
 	case IDT_VC6_5P49V6901:
 	default:
@@ -911,6 +913,13 @@ static const struct vc5_chip_info idt_5p49v5923_info = {
 	.flags = 0,
 };
 
+static const struct vc5_chip_info idt_5p49v5925_info = {
+	.model = IDT_VC5_5P49V5925,
+	.clk_fod_cnt = 4,
+	.clk_out_cnt = 5,
+	.flags = 0,
+};
+
 static const struct vc5_chip_info idt_5p49v5933_info = {
 	.model = IDT_VC5_5P49V5933,
 	.clk_fod_cnt = 2,
@@ -934,6 +943,7 @@ static const struct vc5_chip_info idt_5p49v6901_info = {
 
 static const struct i2c_device_id vc5_id[] = {
 	{ "5p49v5923", .driver_data = IDT_VC5_5P49V5923 },
+	{ "5p49v5925", .driver_data = IDT_VC5_5P49V5925 },
 	{ "5p49v5933", .driver_data = IDT_VC5_5P49V5933 },
 	{ "5p49v5935", .driver_data = IDT_VC5_5P49V5935 },
 	{ "5p49v6901", .driver_data = IDT_VC6_5P49V6901 },
@@ -943,6 +953,7 @@ MODULE_DEVICE_TABLE(i2c, vc5_id);
 
 static const struct of_device_id clk_vc5_of_match[] = {
 	{ .compatible = "idt,5p49v5923", .data = &idt_5p49v5923_info },
+	{ .compatible = "idt,5p49v5925", .data = &idt_5p49v5925_info },
 	{ .compatible = "idt,5p49v5933", .data = &idt_5p49v5933_info },
 	{ .compatible = "idt,5p49v5935", .data = &idt_5p49v5935_info },
 	{ .compatible = "idt,5p49v6901", .data = &idt_5p49v6901_info },
-- 
cgit v1.2.3


From 3a11c6618e176aecf129c6d2f0cbc9440672f378 Mon Sep 17 00:00:00 2001
From: Vladimir Barinov <vladimir.barinov+renesas@cogentembedded.com>
Date: Sun, 9 Jul 2017 20:40:05 +0300
Subject: dt: Add bindings for IDT VersaClock 5P49V5925

IDT VersaClock 5 5P49V5925 has 5 clock outputs, 4 fractional dividers.
Input clock source can be taken only from external reference clock.

Signed-off-by: Vladimir Barinov <vladimir.barinov+renesas@cogentembedded.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
---
 Documentation/devicetree/bindings/clock/idt,versaclock5.txt | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/Documentation/devicetree/bindings/clock/idt,versaclock5.txt b/Documentation/devicetree/bindings/clock/idt,versaclock5.txt
index 66ef0a009b95..05a245c9df08 100644
--- a/Documentation/devicetree/bindings/clock/idt,versaclock5.txt
+++ b/Documentation/devicetree/bindings/clock/idt,versaclock5.txt
@@ -8,6 +8,7 @@ generators providing from 3 to 12 output clocks.
 Required properties:
 - compatible:	shall be one of
 		"idt,5p49v5923"
+		"idt,5p49v5925"
 		"idt,5p49v5933"
 		"idt,5p49v5935"
 		"idt,5p49v6901"
@@ -15,6 +16,7 @@ Required properties:
 - #clock-cells:	from common clock binding; shall be set to 1.
 - clocks:	from common clock binding; list of parent clock handles,
 		- 5p49v5923 and
+		  5p49v5925 and
 		  5p49v6901: (required) either or both of XTAL or CLKIN
 					reference clock.
 		- 5p49v5933 and
@@ -23,6 +25,7 @@ Required properties:
 					clock.
 - clock-names:	from common clock binding; clock input names, can be
 		- 5p49v5923 and
+		  5p49v5925 and
 		  5p49v6901: (required) either or both of "xin", "clkin".
 		- 5p49v5933 and
 		- 5p49v5935: (optional) property not present or "clkin".
@@ -42,6 +45,7 @@ clock specifier, the following mapping applies:
 	1 -- OUT1
 	2 -- OUT4
 
+5P49V5925 and
 5P49V5935:
 	0 -- OUT0_SEL_I2CB
 	1 -- OUT1
-- 
cgit v1.2.3


From fa12167cedea353e71dfb776023b84381305b4d9 Mon Sep 17 00:00:00 2001
From: Sean Wang <sean.wang@mediatek.com>
Date: Mon, 17 Jul 2017 14:01:19 +0800
Subject: clk: mediatek: fixed static checker warning in clk_cpumux_get_parent
 call

Fixed the signedness bug returning '(-22)' on the return type as u8 with
removing the sanity checker in clk_cpumux_get_parent() since
clk_cpumux_set_parent() always ensures validity in clk_cpumux_get_parent()
got called.

Fixes: 1e17de9049da ("clk: mediatek: add missing cpu mux causing Mediatek cpufreq can't work")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
---
 drivers/clk/mediatek/clk-cpumux.c | 4 ----
 1 file changed, 4 deletions(-)

diff --git a/drivers/clk/mediatek/clk-cpumux.c b/drivers/clk/mediatek/clk-cpumux.c
index edd8e6918050..347d7990b30f 100644
--- a/drivers/clk/mediatek/clk-cpumux.c
+++ b/drivers/clk/mediatek/clk-cpumux.c
@@ -27,7 +27,6 @@ static inline struct mtk_clk_cpumux *to_mtk_clk_cpumux(struct clk_hw *_hw)
 static u8 clk_cpumux_get_parent(struct clk_hw *hw)
 {
 	struct mtk_clk_cpumux *mux = to_mtk_clk_cpumux(hw);
-	int num_parents = clk_hw_get_num_parents(hw);
 	unsigned int val;
 
 	regmap_read(mux->regmap, mux->reg, &val);
@@ -35,9 +34,6 @@ static u8 clk_cpumux_get_parent(struct clk_hw *hw)
 	val >>= mux->shift;
 	val &= mux->mask;
 
-	if (val >= num_parents)
-		return -EINVAL;
-
 	return val;
 }
 
-- 
cgit v1.2.3


From d515e027a9bcadbabfb95fa15fde94bd372d48bd Mon Sep 17 00:00:00 2001
From: Georgi Djakov <georgi.djakov@linaro.org>
Date: Mon, 17 Jul 2017 18:35:42 +0300
Subject: clk: qcom: clk-smd-rpm: Fix the reported rate of branches

As there is no way to actually query the hardware for the current clock
rate, now racalc_rate() just returns the last rate that was previously
set. But if the rate was not set yet, we return the bogus rate of 1000Hz.

The branch clocks have the same rate as their parent, so in this case we
just need to remove recalc_rate ops and then the core framework will handle
this automagically. The round_rate() is unused, so remove it as well.

Reported-by: Archit Taneja <architt@codeaurora.org>
Fixes: 00f64b58874e ("clk: qcom: Add support for SMD-RPM Clocks")
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
---
 drivers/clk/qcom/clk-smd-rpm.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/drivers/clk/qcom/clk-smd-rpm.c b/drivers/clk/qcom/clk-smd-rpm.c
index d990fe44aef3..cc03d5508627 100644
--- a/drivers/clk/qcom/clk-smd-rpm.c
+++ b/drivers/clk/qcom/clk-smd-rpm.c
@@ -412,8 +412,6 @@ static const struct clk_ops clk_smd_rpm_ops = {
 static const struct clk_ops clk_smd_rpm_branch_ops = {
 	.prepare	= clk_smd_rpm_prepare,
 	.unprepare	= clk_smd_rpm_unprepare,
-	.round_rate	= clk_smd_rpm_round_rate,
-	.recalc_rate	= clk_smd_rpm_recalc_rate,
 };
 
 /* msm8916 */
-- 
cgit v1.2.3


From c8108cf2c0c8fd1c1f0bef34b4a31d567488e171 Mon Sep 17 00:00:00 2001
From: "Gustavo A. R. Silva" <garsilva@embeddedor.com>
Date: Tue, 4 Jul 2017 17:36:50 -0500
Subject: clk: moxart: remove unnecessary statics

Remove unnecessary static on local variable _base_ in both functions
moxart_of_pll_clk_init() and moxart_of_apb_clk_init(). Such variables
are initialized before being used, on every execution path throughout
the mentioned functions. The statics have no benefit and, removing
them reduce the code size.

This issue was detected using Coccinelle and the following semantic patch:

@bad exists@
position p;
identifier x;
type T;
@@

static T x@p;
...
x = <+...x...+>

@@
identifier x;
expression e;
type T;
position p != bad.p;
@@

-static
 T x@p;
 ... when != x
     when strict
?x = e;

In the following log you can see the difference in the code size. Also,
notice that the bss segment is reduced down to zero. This log is the
output of the size command, before and after the code change:

before:
   text    data     bss     dec     hex filename
   1724     384     128    2236     8bc drivers/clk/clk-moxart.o

after:
   text    data     bss     dec     hex filename
   1697     240       0    1937     791 drivers/clk/clk-moxart.o

Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
---
 drivers/clk/clk-moxart.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/clk/clk-moxart.c b/drivers/clk/clk-moxart.c
index b86dac851116..1f66ccbfc03c 100644
--- a/drivers/clk/clk-moxart.c
+++ b/drivers/clk/clk-moxart.c
@@ -18,7 +18,7 @@
 
 static void __init moxart_of_pll_clk_init(struct device_node *node)
 {
-	static void __iomem *base;
+	void __iomem *base;
 	struct clk_hw *hw;
 	struct clk *ref_clk;
 	unsigned int mul;
@@ -57,7 +57,7 @@ CLK_OF_DECLARE(moxart_pll_clock, "moxa,moxart-pll-clock",
 
 static void __init moxart_of_apb_clk_init(struct device_node *node)
 {
-	static void __iomem *base;
+	void __iomem *base;
 	struct clk_hw *hw;
 	struct clk *pll_clk;
 	unsigned int div, val;
-- 
cgit v1.2.3


From 4aafe9c603029b7e3e91707875beef9950ba35c5 Mon Sep 17 00:00:00 2001
From: Julia Lawall <Julia.Lawall@lip6.fr>
Date: Sat, 15 Jul 2017 22:07:36 +0200
Subject: clk: mmp: Drop unnecessary static

Drop static on a local variable, when the variable is initialized before
any possible use.  Thus, the static has no benefit.

The semantic patch that fixes this problem is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@bad exists@
position p;
identifier x;
type T;
@@
static T x@p;
...
x = <+...x...+>

@@
identifier x;
expression e;
type T;
position p != bad.p;
@@
-static
 T x@p;
 ... when != x
     when strict
?x = e;
// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
---
 drivers/clk/mmp/clk.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/clk/mmp/clk.c b/drivers/clk/mmp/clk.c
index 61893fe73251..089927e4cda2 100644
--- a/drivers/clk/mmp/clk.c
+++ b/drivers/clk/mmp/clk.c
@@ -9,7 +9,7 @@
 void mmp_clk_init(struct device_node *np, struct mmp_clk_unit *unit,
 		int nr_clks)
 {
-	static struct clk **clk_table;
+	struct clk **clk_table;
 
 	clk_table = kcalloc(nr_clks, sizeof(struct clk *), GFP_KERNEL);
 	if (!clk_table)
-- 
cgit v1.2.3


From f317880c5b2bd9c2f3abcd1f799b17b922ac944f Mon Sep 17 00:00:00 2001
From: Wolfram Sang <wsa+renesas@sang-engineering.com>
Date: Tue, 18 Jul 2017 18:44:06 +0200
Subject: clk: renesas: rcar-gen3-cpg: Drop superfluous variable

'rate' is not used, so we can use 'parent_rate' directly.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
 drivers/clk/renesas/rcar-gen3-cpg.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/clk/renesas/rcar-gen3-cpg.c b/drivers/clk/renesas/rcar-gen3-cpg.c
index 3dee900522b7..71b8a986bd48 100644
--- a/drivers/clk/renesas/rcar-gen3-cpg.c
+++ b/drivers/clk/renesas/rcar-gen3-cpg.c
@@ -135,7 +135,6 @@ static unsigned long cpg_sd_clock_recalc_rate(struct clk_hw *hw,
 						unsigned long parent_rate)
 {
 	struct sd_clock *clock = to_sd_clock(hw);
-	unsigned long rate = parent_rate;
 	u32 val, sd_fc;
 	unsigned int i;
 
@@ -149,7 +148,7 @@ static unsigned long cpg_sd_clock_recalc_rate(struct clk_hw *hw,
 	if (i >= clock->div_num)
 		return -EINVAL;
 
-	return DIV_ROUND_CLOSEST(rate, clock->div_table[i].div);
+	return DIV_ROUND_CLOSEST(parent_rate, clock->div_table[i].div);
 }
 
 static unsigned int cpg_sd_clock_calc_div(struct sd_clock *clock,
-- 
cgit v1.2.3


From 2d6f25774332ebf6a0283d5bc558b273991797db Mon Sep 17 00:00:00 2001
From: Wolfram Sang <wsa+renesas@sang-engineering.com>
Date: Tue, 18 Jul 2017 18:44:07 +0200
Subject: clk: renesas: rcar-gen3-cpg: Refactor checks for accessing the div
 table

Do the checks for accessing the SD divider table only when the rate gets
updated, namely on init and set_rate. In all other cases, reuse the last
value. This simplifies code, runtime load, and error reporting.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
 drivers/clk/renesas/rcar-gen3-cpg.c | 46 ++++++++++++++++---------------------
 1 file changed, 20 insertions(+), 26 deletions(-)

diff --git a/drivers/clk/renesas/rcar-gen3-cpg.c b/drivers/clk/renesas/rcar-gen3-cpg.c
index 71b8a986bd48..d4d27cf6110d 100644
--- a/drivers/clk/renesas/rcar-gen3-cpg.c
+++ b/drivers/clk/renesas/rcar-gen3-cpg.c
@@ -60,6 +60,7 @@ struct sd_clock {
 	unsigned int div_num;
 	unsigned int div_min;
 	unsigned int div_max;
+	unsigned int cur_div_idx;
 };
 
 /* SDn divider
@@ -96,21 +97,10 @@ static const struct sd_div_table cpg_sd_div_table[] = {
 static int cpg_sd_clock_enable(struct clk_hw *hw)
 {
 	struct sd_clock *clock = to_sd_clock(hw);
-	u32 val, sd_fc;
-	unsigned int i;
-
-	val = readl(clock->reg);
-
-	sd_fc = val & CPG_SD_FC_MASK;
-	for (i = 0; i < clock->div_num; i++)
-		if (sd_fc == (clock->div_table[i].val & CPG_SD_FC_MASK))
-			break;
-
-	if (i >= clock->div_num)
-		return -EINVAL;
+	u32 val = readl(clock->reg);
 
 	val &= ~(CPG_SD_STP_MASK);
-	val |= clock->div_table[i].val & CPG_SD_STP_MASK;
+	val |= clock->div_table[clock->cur_div_idx].val & CPG_SD_STP_MASK;
 
 	writel(val, clock->reg);
 
@@ -135,20 +125,9 @@ static unsigned long cpg_sd_clock_recalc_rate(struct clk_hw *hw,
 						unsigned long parent_rate)
 {
 	struct sd_clock *clock = to_sd_clock(hw);
-	u32 val, sd_fc;
-	unsigned int i;
-
-	val = readl(clock->reg);
-
-	sd_fc = val & CPG_SD_FC_MASK;
-	for (i = 0; i < clock->div_num; i++)
-		if (sd_fc == (clock->div_table[i].val & CPG_SD_FC_MASK))
-			break;
-
-	if (i >= clock->div_num)
-		return -EINVAL;
 
-	return DIV_ROUND_CLOSEST(parent_rate, clock->div_table[i].div);
+	return DIV_ROUND_CLOSEST(parent_rate,
+				 clock->div_table[clock->cur_div_idx].div);
 }
 
 static unsigned int cpg_sd_clock_calc_div(struct sd_clock *clock,
@@ -189,6 +168,8 @@ static int cpg_sd_clock_set_rate(struct clk_hw *hw, unsigned long rate,
 	if (i >= clock->div_num)
 		return -EINVAL;
 
+	clock->cur_div_idx = i;
+
 	val = readl(clock->reg);
 	val &= ~(CPG_SD_STP_MASK | CPG_SD_FC_MASK);
 	val |= clock->div_table[i].val & (CPG_SD_STP_MASK | CPG_SD_FC_MASK);
@@ -214,6 +195,7 @@ static struct clk * __init cpg_sd_clk_register(const struct cpg_core_clk *core,
 	struct sd_clock *clock;
 	struct clk *clk;
 	unsigned int i;
+	u32 sd_fc;
 
 	clock = kzalloc(sizeof(*clock), GFP_KERNEL);
 	if (!clock)
@@ -230,6 +212,18 @@ static struct clk * __init cpg_sd_clk_register(const struct cpg_core_clk *core,
 	clock->div_table = cpg_sd_div_table;
 	clock->div_num = ARRAY_SIZE(cpg_sd_div_table);
 
+	sd_fc = readl(clock->reg) & CPG_SD_FC_MASK;
+	for (i = 0; i < clock->div_num; i++)
+		if (sd_fc == (clock->div_table[i].val & CPG_SD_FC_MASK))
+			break;
+
+	if (WARN_ON(i >= clock->div_num)) {
+		kfree(clock);
+		return ERR_PTR(-EINVAL);
+	}
+
+	clock->cur_div_idx = i;
+
 	clock->div_max = clock->div_table[0].div;
 	clock->div_min = clock->div_max;
 	for (i = 1; i < clock->div_num; i++) {
-- 
cgit v1.2.3


From e0c888c4a24dd4e55525f37ac854125b3e90c99a Mon Sep 17 00:00:00 2001
From: Yuantian Tang <andy.tang@nxp.com>
Date: Thu, 6 Apr 2017 10:21:22 +0800
Subject: clk: qoriq: add clock configuration for ls1088a soc

Clock on ls1088a chip takes primary clocking input from the external
SYSCLK signal. The SYSCLK input (frequency) is multiplied using
multiple phase locked loops (PLL) to create a variety of frequencies
which can then be passed to a variety of internal logic, including
cores and peripheral IP modules.

Signed-off-by: Tang Yuantian <andy.tang@nxp.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
---
 drivers/clk/clk-qoriq.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/drivers/clk/clk-qoriq.c b/drivers/clk/clk-qoriq.c
index f3931e38fac0..62cf32f2d7dd 100644
--- a/drivers/clk/clk-qoriq.c
+++ b/drivers/clk/clk-qoriq.c
@@ -536,6 +536,17 @@ static const struct clockgen_chipinfo chipinfo[] = {
 		.pll_mask = 0x07,
 		.flags = CG_PLL_8BIT,
 	},
+	{
+		.compat = "fsl,ls1088a-clockgen",
+		.cmux_groups = {
+			&clockgen2_cmux_cga12
+		},
+		.cmux_to_group = {
+			0, 0, -1
+		},
+		.pll_mask = 0x07,
+		.flags = CG_VER3 | CG_LITTLE_ENDIAN,
+	},
 	{
 		.compat = "fsl,ls1012a-clockgen",
 		.cmux_groups = {
@@ -1398,6 +1409,7 @@ CLK_OF_DECLARE(qoriq_clockgen_ls1012a, "fsl,ls1012a-clockgen", clockgen_init);
 CLK_OF_DECLARE(qoriq_clockgen_ls1021a, "fsl,ls1021a-clockgen", clockgen_init);
 CLK_OF_DECLARE(qoriq_clockgen_ls1043a, "fsl,ls1043a-clockgen", clockgen_init);
 CLK_OF_DECLARE(qoriq_clockgen_ls1046a, "fsl,ls1046a-clockgen", clockgen_init);
+CLK_OF_DECLARE(qoriq_clockgen_ls1088a, "fsl,ls1088a-clockgen", clockgen_init);
 CLK_OF_DECLARE(qoriq_clockgen_ls2080a, "fsl,ls2080a-clockgen", clockgen_init);
 
 /* Legacy nodes */
-- 
cgit v1.2.3


From 45899dc5f1b5107903b2bc1c78e22d7945a895fd Mon Sep 17 00:00:00 2001
From: Yuantian Tang <andy.tang@nxp.com>
Date: Thu, 6 Apr 2017 10:21:23 +0800
Subject: clk: qoriq: add pll clock to clock lookup table

Register each PLL and its division clocks to clock
lookup table to facilitate the clock look up for
clock consumer.

Signed-off-by: Tang Yuantian <andy.tang@nxp.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
---
 drivers/clk/clk-qoriq.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/clk/clk-qoriq.c b/drivers/clk/clk-qoriq.c
index 62cf32f2d7dd..0e7de00a84d2 100644
--- a/drivers/clk/clk-qoriq.c
+++ b/drivers/clk/clk-qoriq.c
@@ -12,6 +12,7 @@
 
 #include <linux/clk.h>
 #include <linux/clk-provider.h>
+#include <linux/clkdev.h>
 #include <linux/fsl/guts.h>
 #include <linux/io.h>
 #include <linux/kernel.h>
@@ -1124,6 +1125,7 @@ static void __init create_one_pll(struct clockgen *cg, int idx)
 
 	for (i = 0; i < ARRAY_SIZE(pll->div); i++) {
 		struct clk *clk;
+		int ret;
 
 		snprintf(pll->div[i].name, sizeof(pll->div[i].name),
 			 "cg-pll%d-div%d", idx, i + 1);
@@ -1137,6 +1139,11 @@ static void __init create_one_pll(struct clockgen *cg, int idx)
 		}
 
 		pll->div[i].clk = clk;
+		ret = clk_register_clkdev(clk, pll->div[i].name, NULL);
+		if (ret != 0)
+			pr_err("%s: %s: register to lookup table failed %ld\n",
+			       __func__, pll->div[i].name, PTR_ERR(clk));
+
 	}
 }
 
-- 
cgit v1.2.3


From 1667393126d7c51fad8b3cb9d3798e8e0367e2ec Mon Sep 17 00:00:00 2001
From: Rob Herring <robh@kernel.org>
Date: Tue, 18 Jul 2017 16:42:52 -0500
Subject: clk: Convert to using %pOF instead of full_name
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Now that we have a custom printf format specifier, convert users of
full_name to use %pOF instead. This is preparation to remove storing
of the full path string for each node.

Signed-off-by: Rob Herring <robh@kernel.org>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: "Emilio López" <emilio@elopez.com.ar>
Cc: Peter De Schrijver <pdeschrijver@nvidia.com>
Cc: Prashant Gaikwad <pgaikwad@nvidia.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Jonathan Hunter <jonathanh@nvidia.com>
Cc: Tero Kristo <t-kristo@ti.com>
Cc: linux-clk@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-mediatek@lists.infradead.org
Cc: linux-renesas-soc@vger.kernel.org
Cc: linux-tegra@vger.kernel.org
Cc: linux-omap@vger.kernel.org
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: James Liao <jamesjj.liao@mediatek.com>
Acked-by: Alexandre TORGUE <alexandre.torgue@st.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
---
 drivers/clk/berlin/bg2.c             |  3 +--
 drivers/clk/berlin/bg2q.c            |  7 +++----
 drivers/clk/clk-asm9260.c            |  4 ++--
 drivers/clk/clk-conf.c               | 16 ++++++++--------
 drivers/clk/clk-moxart.c             | 12 ++++++------
 drivers/clk/clk-qoriq.c              |  7 +++----
 drivers/clk/clk-stm32f4.c            |  4 ++--
 drivers/clk/clk-xgene.c              | 15 ++++++---------
 drivers/clk/clk.c                    |  4 ++--
 drivers/clk/clkdev.c                 |  4 ++--
 drivers/clk/mediatek/clk-cpumux.c    |  2 +-
 drivers/clk/mediatek/clk-mtk.c       |  2 +-
 drivers/clk/mediatek/reset.c         |  2 +-
 drivers/clk/renesas/clk-mstp.c       |  2 +-
 drivers/clk/renesas/clk-rcar-gen2.c  |  3 +--
 drivers/clk/sunxi-ng/ccu-sun5i.c     |  3 +--
 drivers/clk/sunxi-ng/ccu-sun6i-a31.c |  3 +--
 drivers/clk/sunxi-ng/ccu-sun8i-a23.c |  3 +--
 drivers/clk/sunxi-ng/ccu-sun8i-a33.c |  3 +--
 drivers/clk/sunxi-ng/ccu-sun8i-h3.c  |  3 +--
 drivers/clk/sunxi-ng/ccu-sun8i-r.c   |  3 +--
 drivers/clk/sunxi-ng/ccu-sun8i-v3s.c |  3 +--
 drivers/clk/sunxi/clk-sunxi.c        | 17 +++++++----------
 drivers/clk/tegra/clk-emc.c          | 12 +++++-------
 drivers/clk/ti/clockdomain.c         |  4 ++--
 25 files changed, 61 insertions(+), 80 deletions(-)

diff --git a/drivers/clk/berlin/bg2.c b/drivers/clk/berlin/bg2.c
index 1d99292e2039..e7331ace0337 100644
--- a/drivers/clk/berlin/bg2.c
+++ b/drivers/clk/berlin/bg2.c
@@ -679,8 +679,7 @@ static void __init berlin2_clock_setup(struct device_node *np)
 		if (!IS_ERR(hws[n]))
 			continue;
 
-		pr_err("%s: Unable to register leaf clock %d\n",
-		       np->full_name, n);
+		pr_err("%pOF: Unable to register leaf clock %d\n", np, n);
 		goto bg2_fail;
 	}
 
diff --git a/drivers/clk/berlin/bg2q.c b/drivers/clk/berlin/bg2q.c
index 3b784b593afd..67c270b143f7 100644
--- a/drivers/clk/berlin/bg2q.c
+++ b/drivers/clk/berlin/bg2q.c
@@ -304,14 +304,14 @@ static void __init berlin2q_clock_setup(struct device_node *np)
 
 	gbase = of_iomap(parent_np, 0);
 	if (!gbase) {
-		pr_err("%s: Unable to map global base\n", np->full_name);
+		pr_err("%pOF: Unable to map global base\n", np);
 		return;
 	}
 
 	/* BG2Q CPU PLL is not part of global registers */
 	cpupll_base = of_iomap(parent_np, 1);
 	if (!cpupll_base) {
-		pr_err("%s: Unable to map cpupll base\n", np->full_name);
+		pr_err("%pOF: Unable to map cpupll base\n", np);
 		iounmap(gbase);
 		return;
 	}
@@ -376,8 +376,7 @@ static void __init berlin2q_clock_setup(struct device_node *np)
 		if (!IS_ERR(hws[n]))
 			continue;
 
-		pr_err("%s: Unable to register leaf clock %d\n",
-		       np->full_name, n);
+		pr_err("%pOF: Unable to register leaf clock %d\n", np, n);
 		goto bg2q_fail;
 	}
 
diff --git a/drivers/clk/clk-asm9260.c b/drivers/clk/clk-asm9260.c
index ea8568536193..bf0582cbbf38 100644
--- a/drivers/clk/clk-asm9260.c
+++ b/drivers/clk/clk-asm9260.c
@@ -338,8 +338,8 @@ static void __init asm9260_acc_init(struct device_node *np)
 		if (!IS_ERR(hws[n]))
 			continue;
 
-		pr_err("%s: Unable to register leaf clock %d\n",
-				np->full_name, n);
+		pr_err("%pOF: Unable to register leaf clock %d\n",
+				np, n);
 		goto fail;
 	}
 
diff --git a/drivers/clk/clk-conf.c b/drivers/clk/clk-conf.c
index 7ec36722f8ab..49819b546134 100644
--- a/drivers/clk/clk-conf.c
+++ b/drivers/clk/clk-conf.c
@@ -23,8 +23,8 @@ static int __set_clk_parents(struct device_node *node, bool clk_supplier)
 	num_parents = of_count_phandle_with_args(node, "assigned-clock-parents",
 						 "#clock-cells");
 	if (num_parents == -EINVAL)
-		pr_err("clk: invalid value of clock-parents property at %s\n",
-		       node->full_name);
+		pr_err("clk: invalid value of clock-parents property at %pOF\n",
+		       node);
 
 	for (index = 0; index < num_parents; index++) {
 		rc = of_parse_phandle_with_args(node, "assigned-clock-parents",
@@ -41,8 +41,8 @@ static int __set_clk_parents(struct device_node *node, bool clk_supplier)
 		pclk = of_clk_get_from_provider(&clkspec);
 		if (IS_ERR(pclk)) {
 			if (PTR_ERR(pclk) != -EPROBE_DEFER)
-				pr_warn("clk: couldn't get parent clock %d for %s\n",
-					index, node->full_name);
+				pr_warn("clk: couldn't get parent clock %d for %pOF\n",
+					index, node);
 			return PTR_ERR(pclk);
 		}
 
@@ -57,8 +57,8 @@ static int __set_clk_parents(struct device_node *node, bool clk_supplier)
 		clk = of_clk_get_from_provider(&clkspec);
 		if (IS_ERR(clk)) {
 			if (PTR_ERR(clk) != -EPROBE_DEFER)
-				pr_warn("clk: couldn't get assigned clock %d for %s\n",
-					index, node->full_name);
+				pr_warn("clk: couldn't get assigned clock %d for %pOF\n",
+					index, node);
 			rc = PTR_ERR(clk);
 			goto err;
 		}
@@ -102,8 +102,8 @@ static int __set_clk_rates(struct device_node *node, bool clk_supplier)
 			clk = of_clk_get_from_provider(&clkspec);
 			if (IS_ERR(clk)) {
 				if (PTR_ERR(clk) != -EPROBE_DEFER)
-					pr_warn("clk: couldn't get clock %d for %s\n",
-						index, node->full_name);
+					pr_warn("clk: couldn't get clock %d for %pOF\n",
+						index, node);
 				return PTR_ERR(clk);
 			}
 
diff --git a/drivers/clk/clk-moxart.c b/drivers/clk/clk-moxart.c
index 1f66ccbfc03c..58428d0043fd 100644
--- a/drivers/clk/clk-moxart.c
+++ b/drivers/clk/clk-moxart.c
@@ -30,7 +30,7 @@ static void __init moxart_of_pll_clk_init(struct device_node *node)
 
 	base = of_iomap(node, 0);
 	if (!base) {
-		pr_err("%s: of_iomap failed\n", node->full_name);
+		pr_err("%pOF: of_iomap failed\n", node);
 		return;
 	}
 
@@ -39,13 +39,13 @@ static void __init moxart_of_pll_clk_init(struct device_node *node)
 
 	ref_clk = of_clk_get(node, 0);
 	if (IS_ERR(ref_clk)) {
-		pr_err("%s: of_clk_get failed\n", node->full_name);
+		pr_err("%pOF: of_clk_get failed\n", node);
 		return;
 	}
 
 	hw = clk_hw_register_fixed_factor(NULL, name, parent_name, 0, mul, 1);
 	if (IS_ERR(hw)) {
-		pr_err("%s: failed to register clock\n", node->full_name);
+		pr_err("%pOF: failed to register clock\n", node);
 		return;
 	}
 
@@ -70,7 +70,7 @@ static void __init moxart_of_apb_clk_init(struct device_node *node)
 
 	base = of_iomap(node, 0);
 	if (!base) {
-		pr_err("%s: of_iomap failed\n", node->full_name);
+		pr_err("%pOF: of_iomap failed\n", node);
 		return;
 	}
 
@@ -83,13 +83,13 @@ static void __init moxart_of_apb_clk_init(struct device_node *node)
 
 	pll_clk = of_clk_get(node, 0);
 	if (IS_ERR(pll_clk)) {
-		pr_err("%s: of_clk_get failed\n", node->full_name);
+		pr_err("%pOF: of_clk_get failed\n", node);
 		return;
 	}
 
 	hw = clk_hw_register_fixed_factor(NULL, name, parent_name, 0, 1, div);
 	if (IS_ERR(hw)) {
-		pr_err("%s: failed to register clock\n", node->full_name);
+		pr_err("%pOF: failed to register clock\n", node);
 		return;
 	}
 
diff --git a/drivers/clk/clk-qoriq.c b/drivers/clk/clk-qoriq.c
index 0e7de00a84d2..b0ea753b8709 100644
--- a/drivers/clk/clk-qoriq.c
+++ b/drivers/clk/clk-qoriq.c
@@ -1366,8 +1366,7 @@ static void __init clockgen_init(struct device_node *np)
 	}
 
 	if (i == ARRAY_SIZE(chipinfo)) {
-		pr_err("%s: unknown clockgen node %s\n", __func__,
-		       np->full_name);
+		pr_err("%s: unknown clockgen node %pOF\n", __func__, np);
 		goto err;
 	}
 	clockgen.info = chipinfo[i];
@@ -1380,8 +1379,8 @@ static void __init clockgen_init(struct device_node *np)
 		if (guts) {
 			clockgen.guts = of_iomap(guts, 0);
 			if (!clockgen.guts) {
-				pr_err("%s: Couldn't map %s regs\n", __func__,
-				       guts->full_name);
+				pr_err("%s: Couldn't map %pOF regs\n", __func__,
+				       guts);
 			}
 		}
 
diff --git a/drivers/clk/clk-stm32f4.c b/drivers/clk/clk-stm32f4.c
index 68e2a4e499f1..96c6b6bc8f0e 100644
--- a/drivers/clk/clk-stm32f4.c
+++ b/drivers/clk/clk-stm32f4.c
@@ -1541,8 +1541,8 @@ static void __init stm32f4_rcc_init(struct device_node *np)
 		    base + gd->offset, gd->bit_idx, 0, &stm32f4_clk_lock);
 
 		if (IS_ERR(clks[idx])) {
-			pr_err("%s: Unable to register leaf clock %s\n",
-			       np->full_name, gd->name);
+			pr_err("%pOF: Unable to register leaf clock %s\n",
+			       np, gd->name);
 			goto fail;
 		}
 	}
diff --git a/drivers/clk/clk-xgene.c b/drivers/clk/clk-xgene.c
index bc37030e38ba..4c75821a3933 100644
--- a/drivers/clk/clk-xgene.c
+++ b/drivers/clk/clk-xgene.c
@@ -192,7 +192,7 @@ static void xgene_pllclk_init(struct device_node *np, enum xgene_pll_type pll_ty
 
 	reg = of_iomap(np, 0);
 	if (reg == NULL) {
-		pr_err("Unable to map CSR register for %s\n", np->full_name);
+		pr_err("Unable to map CSR register for %pOF\n", np);
 		return;
 	}
 	of_property_read_string(np, "clock-output-names", &clk_name);
@@ -409,12 +409,12 @@ static void xgene_pmdclk_init(struct device_node *np)
 	/* Parse the DTS register for resource */
 	rc = of_address_to_resource(np, 0, &res);
 	if (rc != 0) {
-		pr_err("no DTS register for %s\n", np->full_name);
+		pr_err("no DTS register for %pOF\n", np);
 		return;
 	}
 	csr_reg = of_iomap(np, 0);
 	if (!csr_reg) {
-		pr_err("Unable to map resource for %s\n", np->full_name);
+		pr_err("Unable to map resource for %pOF\n", np);
 		return;
 	}
 	of_property_read_string(np, "clock-output-names", &clk_name);
@@ -703,16 +703,14 @@ static void __init xgene_devclk_init(struct device_node *np)
 		rc = of_address_to_resource(np, i, &res);
 		if (rc != 0) {
 			if (i == 0) {
-				pr_err("no DTS register for %s\n",
-					np->full_name);
+				pr_err("no DTS register for %pOF\n", np);
 				return;
 			}
 			break;
 		}
 		map_res = of_iomap(np, i);
 		if (map_res == NULL) {
-			pr_err("Unable to map resource %d for %s\n",
-				i, np->full_name);
+			pr_err("Unable to map resource %d for %pOF\n", i, np);
 			goto err;
 		}
 		if (strcmp(res.name, "div-reg") == 0)
@@ -747,8 +745,7 @@ static void __init xgene_devclk_init(struct device_node *np)
 	pr_debug("Add %s clock\n", clk_name);
 	rc = of_clk_add_provider(np, of_clk_src_simple_get, clk);
 	if (rc != 0)
-		pr_err("%s: could register provider clk %s\n", __func__,
-			np->full_name);
+		pr_err("%s: could register provider clk %pOF\n", __func__, np);
 
 	return;
 
diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
index fc58c52a26b4..c8d83acda006 100644
--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
@@ -3132,7 +3132,7 @@ int of_clk_add_provider(struct device_node *np,
 	mutex_lock(&of_clk_mutex);
 	list_add(&cp->link, &of_clk_providers);
 	mutex_unlock(&of_clk_mutex);
-	pr_debug("Added clock from %s\n", np->full_name);
+	pr_debug("Added clock from %pOF\n", np);
 
 	ret = of_clk_set_defaults(np, true);
 	if (ret < 0)
@@ -3167,7 +3167,7 @@ int of_clk_add_hw_provider(struct device_node *np,
 	mutex_lock(&of_clk_mutex);
 	list_add(&cp->link, &of_clk_providers);
 	mutex_unlock(&of_clk_mutex);
-	pr_debug("Added clk_hw provider from %s\n", np->full_name);
+	pr_debug("Added clk_hw provider from %pOF\n", np);
 
 	ret = of_clk_set_defaults(np, true);
 	if (ret < 0)
diff --git a/drivers/clk/clkdev.c b/drivers/clk/clkdev.c
index bb8a77a5985f..6b2f29df3f70 100644
--- a/drivers/clk/clkdev.c
+++ b/drivers/clk/clkdev.c
@@ -77,8 +77,8 @@ static struct clk *__of_clk_get_by_name(struct device_node *np,
 			break;
 		} else if (name && index >= 0) {
 			if (PTR_ERR(clk) != -EPROBE_DEFER)
-				pr_err("ERROR: could not get clock %s:%s(%i)\n",
-					np->full_name, name ? name : "", index);
+				pr_err("ERROR: could not get clock %pOF:%s(%i)\n",
+					np, name ? name : "", index);
 			return clk;
 		}
 
diff --git a/drivers/clk/mediatek/clk-cpumux.c b/drivers/clk/mediatek/clk-cpumux.c
index 347d7990b30f..16e56772d280 100644
--- a/drivers/clk/mediatek/clk-cpumux.c
+++ b/drivers/clk/mediatek/clk-cpumux.c
@@ -94,7 +94,7 @@ int __init mtk_clk_register_cpumuxes(struct device_node *node,
 
 	regmap = syscon_node_to_regmap(node);
 	if (IS_ERR(regmap)) {
-		pr_err("Cannot find regmap for %s: %ld\n", node->full_name,
+		pr_err("Cannot find regmap for %pOF: %ld\n", node,
 		       PTR_ERR(regmap));
 		return PTR_ERR(regmap);
 	}
diff --git a/drivers/clk/mediatek/clk-mtk.c b/drivers/clk/mediatek/clk-mtk.c
index 0541df78141c..9c0ae4278a94 100644
--- a/drivers/clk/mediatek/clk-mtk.c
+++ b/drivers/clk/mediatek/clk-mtk.c
@@ -114,7 +114,7 @@ int mtk_clk_register_gates(struct device_node *node,
 
 	regmap = syscon_node_to_regmap(node);
 	if (IS_ERR(regmap)) {
-		pr_err("Cannot find regmap for %s: %ld\n", node->full_name,
+		pr_err("Cannot find regmap for %pOF: %ld\n", node,
 				PTR_ERR(regmap));
 		return PTR_ERR(regmap);
 	}
diff --git a/drivers/clk/mediatek/reset.c b/drivers/clk/mediatek/reset.c
index 309049d41f1b..d3551d5efef2 100644
--- a/drivers/clk/mediatek/reset.c
+++ b/drivers/clk/mediatek/reset.c
@@ -72,7 +72,7 @@ void mtk_register_reset_controller(struct device_node *np,
 
 	regmap = syscon_node_to_regmap(np);
 	if (IS_ERR(regmap)) {
-		pr_err("Cannot find regmap for %s: %ld\n", np->full_name,
+		pr_err("Cannot find regmap for %pOF: %ld\n", np,
 				PTR_ERR(regmap));
 		return;
 	}
diff --git a/drivers/clk/renesas/clk-mstp.c b/drivers/clk/renesas/clk-mstp.c
index f1617dd044cb..500a9e4e03c4 100644
--- a/drivers/clk/renesas/clk-mstp.c
+++ b/drivers/clk/renesas/clk-mstp.c
@@ -335,7 +335,7 @@ void __init cpg_mstp_add_clk_domain(struct device_node *np)
 	u32 ncells;
 
 	if (of_property_read_u32(np, "#power-domain-cells", &ncells)) {
-		pr_warn("%s lacks #power-domain-cells\n", np->full_name);
+		pr_warn("%pOF lacks #power-domain-cells\n", np);
 		return;
 	}
 
diff --git a/drivers/clk/renesas/clk-rcar-gen2.c b/drivers/clk/renesas/clk-rcar-gen2.c
index 51a2479ed5d7..0b2e56d0d94b 100644
--- a/drivers/clk/renesas/clk-rcar-gen2.c
+++ b/drivers/clk/renesas/clk-rcar-gen2.c
@@ -407,8 +407,7 @@ static void __init rcar_gen2_cpg_clocks_init(struct device_node *np)
 
 	if (rcar_rst_read_mode_pins(&cpg_mode)) {
 		/* Backward-compatibility with old DT */
-		pr_warn("%s: failed to obtain mode pins from RST\n",
-			np->full_name);
+		pr_warn("%pOF: failed to obtain mode pins from RST\n", np);
 		cpg_mode = rcar_gen2_read_mode_pins();
 	}
 
diff --git a/drivers/clk/sunxi-ng/ccu-sun5i.c b/drivers/clk/sunxi-ng/ccu-sun5i.c
index 5372bf8be5e6..194d7bfffa53 100644
--- a/drivers/clk/sunxi-ng/ccu-sun5i.c
+++ b/drivers/clk/sunxi-ng/ccu-sun5i.c
@@ -976,8 +976,7 @@ static void __init sun5i_ccu_init(struct device_node *node,
 
 	reg = of_io_request_and_map(node, 0, of_node_full_name(node));
 	if (IS_ERR(reg)) {
-		pr_err("%s: Could not map the clock registers\n",
-		       of_node_full_name(node));
+		pr_err("%pOF: Could not map the clock registers\n", node);
 		return;
 	}
 
diff --git a/drivers/clk/sunxi-ng/ccu-sun6i-a31.c b/drivers/clk/sunxi-ng/ccu-sun6i-a31.c
index 4d6078fca9ac..8af434815fba 100644
--- a/drivers/clk/sunxi-ng/ccu-sun6i-a31.c
+++ b/drivers/clk/sunxi-ng/ccu-sun6i-a31.c
@@ -1217,8 +1217,7 @@ static void __init sun6i_a31_ccu_setup(struct device_node *node)
 
 	reg = of_io_request_and_map(node, 0, of_node_full_name(node));
 	if (IS_ERR(reg)) {
-		pr_err("%s: Could not map the clock registers\n",
-		       of_node_full_name(node));
+		pr_err("%pOF: Could not map the clock registers\n", node);
 		return;
 	}
 
diff --git a/drivers/clk/sunxi-ng/ccu-sun8i-a23.c b/drivers/clk/sunxi-ng/ccu-sun8i-a23.c
index 8a753ed0426d..d93b452f0df9 100644
--- a/drivers/clk/sunxi-ng/ccu-sun8i-a23.c
+++ b/drivers/clk/sunxi-ng/ccu-sun8i-a23.c
@@ -716,8 +716,7 @@ static void __init sun8i_a23_ccu_setup(struct device_node *node)
 
 	reg = of_io_request_and_map(node, 0, of_node_full_name(node));
 	if (IS_ERR(reg)) {
-		pr_err("%s: Could not map the clock registers\n",
-		       of_node_full_name(node));
+		pr_err("%pOF: Could not map the clock registers\n", node);
 		return;
 	}
 
diff --git a/drivers/clk/sunxi-ng/ccu-sun8i-a33.c b/drivers/clk/sunxi-ng/ccu-sun8i-a33.c
index 10b38dc46f75..13eb5b23c5e7 100644
--- a/drivers/clk/sunxi-ng/ccu-sun8i-a33.c
+++ b/drivers/clk/sunxi-ng/ccu-sun8i-a33.c
@@ -777,8 +777,7 @@ static void __init sun8i_a33_ccu_setup(struct device_node *node)
 
 	reg = of_io_request_and_map(node, 0, of_node_full_name(node));
 	if (IS_ERR(reg)) {
-		pr_err("%s: Could not map the clock registers\n",
-		       of_node_full_name(node));
+		pr_err("%pOF: Could not map the clock registers\n", node);
 		return;
 	}
 
diff --git a/drivers/clk/sunxi-ng/ccu-sun8i-h3.c b/drivers/clk/sunxi-ng/ccu-sun8i-h3.c
index 62e4f0d2b2fc..d1ab0d713fa6 100644
--- a/drivers/clk/sunxi-ng/ccu-sun8i-h3.c
+++ b/drivers/clk/sunxi-ng/ccu-sun8i-h3.c
@@ -1118,8 +1118,7 @@ static void __init sunxi_h3_h5_ccu_init(struct device_node *node,
 
 	reg = of_io_request_and_map(node, 0, of_node_full_name(node));
 	if (IS_ERR(reg)) {
-		pr_err("%s: Could not map the clock registers\n",
-		       of_node_full_name(node));
+		pr_err("%pOF: Could not map the clock registers\n", node);
 		return;
 	}
 
diff --git a/drivers/clk/sunxi-ng/ccu-sun8i-r.c b/drivers/clk/sunxi-ng/ccu-sun8i-r.c
index e54816ec1dbe..71feb7b24e8a 100644
--- a/drivers/clk/sunxi-ng/ccu-sun8i-r.c
+++ b/drivers/clk/sunxi-ng/ccu-sun8i-r.c
@@ -290,8 +290,7 @@ static void __init sunxi_r_ccu_init(struct device_node *node,
 
 	reg = of_io_request_and_map(node, 0, of_node_full_name(node));
 	if (IS_ERR(reg)) {
-		pr_err("%s: Could not map the clock registers\n",
-		       of_node_full_name(node));
+		pr_err("%pOF: Could not map the clock registers\n", node);
 		return;
 	}
 
diff --git a/drivers/clk/sunxi-ng/ccu-sun8i-v3s.c b/drivers/clk/sunxi-ng/ccu-sun8i-v3s.c
index a34a78d7fb28..621b1cd996db 100644
--- a/drivers/clk/sunxi-ng/ccu-sun8i-v3s.c
+++ b/drivers/clk/sunxi-ng/ccu-sun8i-v3s.c
@@ -575,8 +575,7 @@ static void __init sun8i_v3s_ccu_setup(struct device_node *node)
 
 	reg = of_io_request_and_map(node, 0, of_node_full_name(node));
 	if (IS_ERR(reg)) {
-		pr_err("%s: Could not map the clock registers\n",
-		       of_node_full_name(node));
+		pr_err("%pOF: Could not map the clock registers\n", node);
 		return;
 	}
 
diff --git a/drivers/clk/sunxi/clk-sunxi.c b/drivers/clk/sunxi/clk-sunxi.c
index f2c9274b8bd5..aa4add580516 100644
--- a/drivers/clk/sunxi/clk-sunxi.c
+++ b/drivers/clk/sunxi/clk-sunxi.c
@@ -666,15 +666,14 @@ static struct clk * __init sunxi_mux_clk_setup(struct device_node *node,
 
 	reg = of_iomap(node, 0);
 	if (!reg) {
-		pr_err("Could not map registers for mux-clk: %s\n",
-		       of_node_full_name(node));
+		pr_err("Could not map registers for mux-clk: %pOF\n", node);
 		return NULL;
 	}
 
 	i = of_clk_parent_fill(node, parents, SUNXI_MAX_PARENTS);
 	if (of_property_read_string(node, "clock-output-names", &clk_name)) {
-		pr_err("%s: could not read clock-output-names from \"%s\"\n",
-		       __func__, of_node_full_name(node));
+		pr_err("%s: could not read clock-output-names from \"%pOF\"\n",
+		       __func__, node);
 		goto out_unmap;
 	}
 
@@ -797,16 +796,15 @@ static void __init sunxi_divider_clk_setup(struct device_node *node,
 
 	reg = of_iomap(node, 0);
 	if (!reg) {
-		pr_err("Could not map registers for mux-clk: %s\n",
-		       of_node_full_name(node));
+		pr_err("Could not map registers for mux-clk: %pOF\n", node);
 		return;
 	}
 
 	clk_parent = of_clk_get_parent_name(node, 0);
 
 	if (of_property_read_string(node, "clock-output-names", &clk_name)) {
-		pr_err("%s: could not read clock-output-names from \"%s\"\n",
-		       __func__, of_node_full_name(node));
+		pr_err("%s: could not read clock-output-names from \"%pOF\"\n",
+		       __func__, node);
 		goto out_unmap;
 	}
 
@@ -1010,8 +1008,7 @@ static struct clk ** __init sunxi_divs_clk_setup(struct device_node *node,
 
 	reg = of_iomap(node, 0);
 	if (!reg) {
-		pr_err("Could not map registers for divs-clk: %s\n",
-		       of_node_full_name(node));
+		pr_err("Could not map registers for divs-clk: %pOF\n", node);
 		return NULL;
 	}
 
diff --git a/drivers/clk/tegra/clk-emc.c b/drivers/clk/tegra/clk-emc.c
index 74e7544f861b..11a5066e5c27 100644
--- a/drivers/clk/tegra/clk-emc.c
+++ b/drivers/clk/tegra/clk-emc.c
@@ -378,7 +378,7 @@ static int load_one_timing_from_dt(struct tegra_clk_emc *tegra,
 
 	err = of_property_read_u32(node, "clock-frequency", &tmp);
 	if (err) {
-		pr_err("timing %s: failed to read rate\n", node->full_name);
+		pr_err("timing %pOF: failed to read rate\n", node);
 		return err;
 	}
 
@@ -386,8 +386,7 @@ static int load_one_timing_from_dt(struct tegra_clk_emc *tegra,
 
 	err = of_property_read_u32(node, "nvidia,parent-clock-frequency", &tmp);
 	if (err) {
-		pr_err("timing %s: failed to read parent rate\n",
-		       node->full_name);
+		pr_err("timing %pOF: failed to read parent rate\n", node);
 		return err;
 	}
 
@@ -395,8 +394,7 @@ static int load_one_timing_from_dt(struct tegra_clk_emc *tegra,
 
 	timing->parent = of_clk_get_by_name(node, "emc-parent");
 	if (IS_ERR(timing->parent)) {
-		pr_err("timing %s: failed to get parent clock\n",
-		       node->full_name);
+		pr_err("timing %pOF: failed to get parent clock\n", node);
 		return PTR_ERR(timing->parent);
 	}
 
@@ -409,8 +407,8 @@ static int load_one_timing_from_dt(struct tegra_clk_emc *tegra,
 		}
 	}
 	if (timing->parent_index == 0xff) {
-		pr_err("timing %s: %s is not a valid parent\n",
-		       node->full_name, __clk_get_name(timing->parent));
+		pr_err("timing %pOF: %s is not a valid parent\n",
+		       node, __clk_get_name(timing->parent));
 		clk_put(timing->parent);
 		return -EINVAL;
 	}
diff --git a/drivers/clk/ti/clockdomain.c b/drivers/clk/ti/clockdomain.c
index fbedc6a9fed0..07a805125e98 100644
--- a/drivers/clk/ti/clockdomain.c
+++ b/drivers/clk/ti/clockdomain.c
@@ -138,8 +138,8 @@ static void __init of_ti_clockdomain_setup(struct device_node *node)
 	for (i = 0; i < num_clks; i++) {
 		clk = of_clk_get(node, i);
 		if (IS_ERR(clk)) {
-			pr_err("%s: Failed get %s' clock nr %d (%ld)\n",
-			       __func__, node->full_name, i, PTR_ERR(clk));
+			pr_err("%s: Failed get %pOF' clock nr %d (%ld)\n",
+			       __func__, node, i, PTR_ERR(clk));
 			continue;
 		}
 		clk_hw = __clk_get_hw(clk);
-- 
cgit v1.2.3


From f70893dcce0c575c2cddaf13430c3426ca73c7c4 Mon Sep 17 00:00:00 2001
From: Matthias Kaehlcke <mka@chromium.org>
Date: Wed, 26 Jul 2017 14:02:21 -0700
Subject: clk: sunxi-ng: Fix header guard of ccu-sun8i-r.h

Remove trailing extra underscore in definition of _CCU_SUN8I_R_H

Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
---
 drivers/clk/sunxi-ng/ccu-sun8i-r.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/clk/sunxi-ng/ccu-sun8i-r.h b/drivers/clk/sunxi-ng/ccu-sun8i-r.h
index a7a407f12b56..fb01bffb929d 100644
--- a/drivers/clk/sunxi-ng/ccu-sun8i-r.h
+++ b/drivers/clk/sunxi-ng/ccu-sun8i-r.h
@@ -13,7 +13,7 @@
  */
 
 #ifndef _CCU_SUN8I_R_H
-#define _CCU_SUN8I_R_H_
+#define _CCU_SUN8I_R_H
 
 #include <dt-bindings/clock/sun8i-r-ccu.h>
 #include <dt-bindings/reset/sun8i-r-ccu.h>
-- 
cgit v1.2.3


From b64dfec01050a010fa764dae3746353bdbdecfe1 Mon Sep 17 00:00:00 2001
From: Jernej Škrabec <jernej.skrabec@siol.net>
Date: Sun, 30 Jul 2017 18:41:47 +0200
Subject: clk: sunxi-ng: Fix fractional mode for N-M clocks

N-M factor clock driver is missing a call to ccu_frac_helper_enable()
when fractional mode is used. Additionally, most SoCs require that M
factor must be set to 0 when fractional mode is used.

Without this patch, clock keeps the old value and clk_set_rate() returns
without error.

Fixes: 6174a1e24b0d ("clk: sunxi-ng: Add N-M-factor clock support")
CC: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---
 drivers/clk/sunxi-ng/ccu_nm.c | 16 ++++++++++++++--
 1 file changed, 14 insertions(+), 2 deletions(-)

diff --git a/drivers/clk/sunxi-ng/ccu_nm.c b/drivers/clk/sunxi-ng/ccu_nm.c
index 5e5e90a4a50c..c6ba866b99d3 100644
--- a/drivers/clk/sunxi-ng/ccu_nm.c
+++ b/drivers/clk/sunxi-ng/ccu_nm.c
@@ -117,10 +117,22 @@ static int ccu_nm_set_rate(struct clk_hw *hw, unsigned long rate,
 	unsigned long flags;
 	u32 reg;
 
-	if (ccu_frac_helper_has_rate(&nm->common, &nm->frac, rate))
+	if (ccu_frac_helper_has_rate(&nm->common, &nm->frac, rate)) {
+		spin_lock_irqsave(nm->common.lock, flags);
+
+		/* most SoCs require M to be 0 if fractional mode is used */
+		reg = readl(nm->common.base + nm->common.reg);
+		reg &= ~GENMASK(nm->m.width + nm->m.shift - 1, nm->m.shift);
+		writel(reg, nm->common.base + nm->common.reg);
+
+		spin_unlock_irqrestore(nm->common.lock, flags);
+
+		ccu_frac_helper_enable(&nm->common, &nm->frac);
+
 		return ccu_frac_helper_set_rate(&nm->common, &nm->frac, rate);
-	else
+	} else {
 		ccu_frac_helper_disable(&nm->common, &nm->frac);
+	}
 
 	_nm.min_n = nm->n.min ?: 1;
 	_nm.max_n = nm->n.max ?: 1 << nm->n.width;
-- 
cgit v1.2.3


From 1e92ae651e766603d9c582ff356abf96ae90d933 Mon Sep 17 00:00:00 2001
From: Jernej Škrabec <jernej.skrabec@siol.net>
Date: Sun, 30 Jul 2017 18:41:48 +0200
Subject: clk: sunxi-ng: multiplier: Fix fractional mode

Driver for multiplier clock is missing a call to
ccu_frac_helper_enable() when fractional mode is selected.

Add a call to ccu_frac_helper_enable().

Fixes: d77e8135b340 ("clk: sunxi-ng: multiplier: Add fractional support")
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---
 drivers/clk/sunxi-ng/ccu_mult.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/clk/sunxi-ng/ccu_mult.c b/drivers/clk/sunxi-ng/ccu_mult.c
index 20d0300867f2..ee5e96222cb2 100644
--- a/drivers/clk/sunxi-ng/ccu_mult.c
+++ b/drivers/clk/sunxi-ng/ccu_mult.c
@@ -111,10 +111,13 @@ static int ccu_mult_set_rate(struct clk_hw *hw, unsigned long rate,
 	unsigned long flags;
 	u32 reg;
 
-	if (ccu_frac_helper_has_rate(&cm->common, &cm->frac, rate))
+	if (ccu_frac_helper_has_rate(&cm->common, &cm->frac, rate)) {
+		ccu_frac_helper_enable(&cm->common, &cm->frac);
+
 		return ccu_frac_helper_set_rate(&cm->common, &cm->frac, rate);
-	else
+	} else {
 		ccu_frac_helper_disable(&cm->common, &cm->frac);
+	}
 
 	parent_rate = ccu_mux_helper_apply_prediv(&cm->common, &cm->mux, -1,
 						  parent_rate);
-- 
cgit v1.2.3


From b655f36e2071a9a380477e2f07893c31cbf88f59 Mon Sep 17 00:00:00 2001
From: Jernej Škrabec <jernej.skrabec@siol.net>
Date: Sun, 30 Jul 2017 18:41:49 +0200
Subject: clk: sunxi-ng: Make fractional helper less chatty

ccu_frac_helper_read_rate() prints some info which is not really
helpful except during debugging.

Replace printk() with pr_debug().

Fixes: 89a3dfb78707 ("clk: sunxi-ng: Add fractional lib")
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---
 drivers/clk/sunxi-ng/ccu_frac.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/clk/sunxi-ng/ccu_frac.c b/drivers/clk/sunxi-ng/ccu_frac.c
index 8b5eb7756bf7..ff9e72dc5337 100644
--- a/drivers/clk/sunxi-ng/ccu_frac.c
+++ b/drivers/clk/sunxi-ng/ccu_frac.c
@@ -67,18 +67,18 @@ unsigned long ccu_frac_helper_read_rate(struct ccu_common *common,
 {
 	u32 reg;
 
-	printk("%s: Read fractional\n", clk_hw_get_name(&common->hw));
+	pr_debug("%s: Read fractional\n", clk_hw_get_name(&common->hw));
 
 	if (!(common->features & CCU_FEATURE_FRACTIONAL))
 		return 0;
 
-	printk("%s: clock is fractional (rates %lu and %lu)\n",
-	       clk_hw_get_name(&common->hw), cf->rates[0], cf->rates[1]);
+	pr_debug("%s: clock is fractional (rates %lu and %lu)\n",
+		 clk_hw_get_name(&common->hw), cf->rates[0], cf->rates[1]);
 
 	reg = readl(common->base + common->reg);
 
-	printk("%s: clock reg is 0x%x (select is 0x%x)\n",
-	       clk_hw_get_name(&common->hw), reg, cf->select);
+	pr_debug("%s: clock reg is 0x%x (select is 0x%x)\n",
+		 clk_hw_get_name(&common->hw), reg, cf->select);
 
 	return (reg & cf->select) ? cf->rates[1] : cf->rates[0];
 }
-- 
cgit v1.2.3


From 1d42460a49347af4d1db345197e5d1277336b312 Mon Sep 17 00:00:00 2001
From: Jernej Škrabec <jernej.skrabec@siol.net>
Date: Sun, 30 Jul 2017 18:41:50 +0200
Subject: clk: sunxi-ng: Wait for lock when using fractional mode

Currently ccu_frac_helper_set_rate() doesn't wait for a lock bit to be
set before returning. Because of that, unstable clock may be used.

Add a wait for lock in the helper function.

Fixes: 89a3dfb78707 ("clk: sunxi-ng: Add fractional lib")
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---
 drivers/clk/sunxi-ng/ccu_frac.c | 4 +++-
 drivers/clk/sunxi-ng/ccu_frac.h | 2 +-
 drivers/clk/sunxi-ng/ccu_mult.c | 3 ++-
 drivers/clk/sunxi-ng/ccu_nm.c   | 3 ++-
 4 files changed, 8 insertions(+), 4 deletions(-)

diff --git a/drivers/clk/sunxi-ng/ccu_frac.c b/drivers/clk/sunxi-ng/ccu_frac.c
index ff9e72dc5337..d1d168d4c4f0 100644
--- a/drivers/clk/sunxi-ng/ccu_frac.c
+++ b/drivers/clk/sunxi-ng/ccu_frac.c
@@ -85,7 +85,7 @@ unsigned long ccu_frac_helper_read_rate(struct ccu_common *common,
 
 int ccu_frac_helper_set_rate(struct ccu_common *common,
 			     struct ccu_frac_internal *cf,
-			     unsigned long rate)
+			     unsigned long rate, u32 lock)
 {
 	unsigned long flags;
 	u32 reg, sel;
@@ -106,5 +106,7 @@ int ccu_frac_helper_set_rate(struct ccu_common *common,
 	writel(reg | sel, common->base + common->reg);
 	spin_unlock_irqrestore(common->lock, flags);
 
+	ccu_helper_wait_for_lock(common, lock);
+
 	return 0;
 }
diff --git a/drivers/clk/sunxi-ng/ccu_frac.h b/drivers/clk/sunxi-ng/ccu_frac.h
index 7b1ee380156f..efe2dd6bac01 100644
--- a/drivers/clk/sunxi-ng/ccu_frac.h
+++ b/drivers/clk/sunxi-ng/ccu_frac.h
@@ -48,6 +48,6 @@ unsigned long ccu_frac_helper_read_rate(struct ccu_common *common,
 
 int ccu_frac_helper_set_rate(struct ccu_common *common,
 			     struct ccu_frac_internal *cf,
-			     unsigned long rate);
+			     unsigned long rate, u32 lock);
 
 #endif /* _CCU_FRAC_H_ */
diff --git a/drivers/clk/sunxi-ng/ccu_mult.c b/drivers/clk/sunxi-ng/ccu_mult.c
index ee5e96222cb2..12e0783caee6 100644
--- a/drivers/clk/sunxi-ng/ccu_mult.c
+++ b/drivers/clk/sunxi-ng/ccu_mult.c
@@ -114,7 +114,8 @@ static int ccu_mult_set_rate(struct clk_hw *hw, unsigned long rate,
 	if (ccu_frac_helper_has_rate(&cm->common, &cm->frac, rate)) {
 		ccu_frac_helper_enable(&cm->common, &cm->frac);
 
-		return ccu_frac_helper_set_rate(&cm->common, &cm->frac, rate);
+		return ccu_frac_helper_set_rate(&cm->common, &cm->frac,
+						rate, cm->lock);
 	} else {
 		ccu_frac_helper_disable(&cm->common, &cm->frac);
 	}
diff --git a/drivers/clk/sunxi-ng/ccu_nm.c b/drivers/clk/sunxi-ng/ccu_nm.c
index c6ba866b99d3..a32158e8f2e3 100644
--- a/drivers/clk/sunxi-ng/ccu_nm.c
+++ b/drivers/clk/sunxi-ng/ccu_nm.c
@@ -129,7 +129,8 @@ static int ccu_nm_set_rate(struct clk_hw *hw, unsigned long rate,
 
 		ccu_frac_helper_enable(&nm->common, &nm->frac);
 
-		return ccu_frac_helper_set_rate(&nm->common, &nm->frac, rate);
+		return ccu_frac_helper_set_rate(&nm->common, &nm->frac,
+						rate, nm->lock);
 	} else {
 		ccu_frac_helper_disable(&nm->common, &nm->frac);
 	}
-- 
cgit v1.2.3


From e66d57a92ee249f53691c8c33da81da91f651e14 Mon Sep 17 00:00:00 2001
From: Masahiro Yamada <yamada.masahiro@socionext.com>
Date: Wed, 26 Jul 2017 12:34:35 +0900
Subject: clk: uniphier: remove sLD3 SoC support

This SoC is too old.  It is difficult to maintain any longer.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
---
 .../devicetree/bindings/clock/uniphier-clock.txt   |  5 ---
 drivers/clk/uniphier/clk-uniphier-core.c           | 16 +++------
 drivers/clk/uniphier/clk-uniphier-mio.c            |  4 +--
 drivers/clk/uniphier/clk-uniphier-sys.c            | 42 ++++++++--------------
 drivers/clk/uniphier/clk-uniphier.h                |  3 +-
 5 files changed, 20 insertions(+), 50 deletions(-)

diff --git a/Documentation/devicetree/bindings/clock/uniphier-clock.txt b/Documentation/devicetree/bindings/clock/uniphier-clock.txt
index 812163060fa3..2aec32d888ac 100644
--- a/Documentation/devicetree/bindings/clock/uniphier-clock.txt
+++ b/Documentation/devicetree/bindings/clock/uniphier-clock.txt
@@ -6,7 +6,6 @@ System clock
 
 Required properties:
 - compatible: should be one of the following:
-    "socionext,uniphier-sld3-clock" - for sLD3 SoC.
     "socionext,uniphier-ld4-clock"  - for LD4 SoC.
     "socionext,uniphier-pro4-clock" - for Pro4 SoC.
     "socionext,uniphier-sld8-clock" - for sLD8 SoC.
@@ -48,7 +47,6 @@ Media I/O (MIO) clock, SD clock
 
 Required properties:
 - compatible: should be one of the following:
-    "socionext,uniphier-sld3-mio-clock" - for sLD3 SoC.
     "socionext,uniphier-ld4-mio-clock"  - for LD4 SoC.
     "socionext,uniphier-pro4-mio-clock" - for Pro4 SoC.
     "socionext,uniphier-sld8-mio-clock" - for sLD8 SoC.
@@ -82,11 +80,9 @@ Provided clocks:
  8: USB2 ch0 host
  9: USB2 ch1 host
 10: USB2 ch2 host
-11: USB2 ch3 host
 12: USB2 ch0 PHY
 13: USB2 ch1 PHY
 14: USB2 ch2 PHY
-15: USB2 ch3 PHY
 
 
 Peripheral clock
@@ -94,7 +90,6 @@ Peripheral clock
 
 Required properties:
 - compatible: should be one of the following:
-    "socionext,uniphier-sld3-peri-clock" - for sLD3 SoC.
     "socionext,uniphier-ld4-peri-clock"  - for LD4 SoC.
     "socionext,uniphier-pro4-peri-clock" - for Pro4 SoC.
     "socionext,uniphier-sld8-peri-clock" - for sLD8 SoC.
diff --git a/drivers/clk/uniphier/clk-uniphier-core.c b/drivers/clk/uniphier/clk-uniphier-core.c
index 2cf386347f0c..cb6ae261bb36 100644
--- a/drivers/clk/uniphier/clk-uniphier-core.c
+++ b/drivers/clk/uniphier/clk-uniphier-core.c
@@ -110,10 +110,6 @@ static int uniphier_clk_remove(struct platform_device *pdev)
 
 static const struct of_device_id uniphier_clk_match[] = {
 	/* System clock */
-	{
-		.compatible = "socionext,uniphier-sld3-clock",
-		.data = uniphier_sld3_sys_clk_data,
-	},
 	{
 		.compatible = "socionext,uniphier-ld4-clock",
 		.data = uniphier_ld4_sys_clk_data,
@@ -143,21 +139,17 @@ static const struct of_device_id uniphier_clk_match[] = {
 		.data = uniphier_ld20_sys_clk_data,
 	},
 	/* Media I/O clock, SD clock */
-	{
-		.compatible = "socionext,uniphier-sld3-mio-clock",
-		.data = uniphier_sld3_mio_clk_data,
-	},
 	{
 		.compatible = "socionext,uniphier-ld4-mio-clock",
-		.data = uniphier_sld3_mio_clk_data,
+		.data = uniphier_ld4_mio_clk_data,
 	},
 	{
 		.compatible = "socionext,uniphier-pro4-mio-clock",
-		.data = uniphier_sld3_mio_clk_data,
+		.data = uniphier_ld4_mio_clk_data,
 	},
 	{
 		.compatible = "socionext,uniphier-sld8-mio-clock",
-		.data = uniphier_sld3_mio_clk_data,
+		.data = uniphier_ld4_mio_clk_data,
 	},
 	{
 		.compatible = "socionext,uniphier-pro5-sd-clock",
@@ -169,7 +161,7 @@ static const struct of_device_id uniphier_clk_match[] = {
 	},
 	{
 		.compatible = "socionext,uniphier-ld11-mio-clock",
-		.data = uniphier_sld3_mio_clk_data,
+		.data = uniphier_ld4_mio_clk_data,
 	},
 	{
 		.compatible = "socionext,uniphier-ld20-sd-clock",
diff --git a/drivers/clk/uniphier/clk-uniphier-mio.c b/drivers/clk/uniphier/clk-uniphier-mio.c
index 218d20f099ce..16e4d303f535 100644
--- a/drivers/clk/uniphier/clk-uniphier-mio.c
+++ b/drivers/clk/uniphier/clk-uniphier-mio.c
@@ -76,7 +76,7 @@
 #define UNIPHIER_MIO_CLK_DMAC(idx)					\
 	UNIPHIER_CLK_GATE("miodmac", (idx), "stdmac", 0x20, 25)
 
-const struct uniphier_clk_data uniphier_sld3_mio_clk_data[] = {
+const struct uniphier_clk_data uniphier_ld4_mio_clk_data[] = {
 	UNIPHIER_MIO_CLK_SD_FIXED,
 	UNIPHIER_MIO_CLK_SD(0, 0),
 	UNIPHIER_MIO_CLK_SD(1, 1),
@@ -85,11 +85,9 @@ const struct uniphier_clk_data uniphier_sld3_mio_clk_data[] = {
 	UNIPHIER_MIO_CLK_USB2(8, 0),
 	UNIPHIER_MIO_CLK_USB2(9, 1),
 	UNIPHIER_MIO_CLK_USB2(10, 2),
-	UNIPHIER_MIO_CLK_USB2(11, 3),
 	UNIPHIER_MIO_CLK_USB2_PHY(12, 0),
 	UNIPHIER_MIO_CLK_USB2_PHY(13, 1),
 	UNIPHIER_MIO_CLK_USB2_PHY(14, 2),
-	UNIPHIER_MIO_CLK_USB2_PHY(15, 3),
 	{ /* sentinel */ }
 };
 
diff --git a/drivers/clk/uniphier/clk-uniphier-sys.c b/drivers/clk/uniphier/clk-uniphier-sys.c
index ad0218182a9f..6fcf781de7d3 100644
--- a/drivers/clk/uniphier/clk-uniphier-sys.c
+++ b/drivers/clk/uniphier/clk-uniphier-sys.c
@@ -17,7 +17,7 @@
 
 #include "clk-uniphier.h"
 
-#define UNIPHIER_SLD3_SYS_CLK_SD					\
+#define UNIPHIER_LD4_SYS_CLK_SD					\
 	UNIPHIER_CLK_FACTOR("sd-200m", -1, "spll", 1, 8),		\
 	UNIPHIER_CLK_FACTOR("sd-133m", -1, "vpll27a", 1, 2)
 
@@ -30,7 +30,7 @@
 	UNIPHIER_CLK_FACTOR("sd-133m", -1, "spll", 1, 15)
 
 /* Denali driver requires clk_x rate (clk: 50MHz, clk_x & ecc_clk: 200MHz) */
-#define UNIPHIER_SLD3_SYS_CLK_NAND(idx)					\
+#define UNIPHIER_LD4_SYS_CLK_NAND(idx)					\
 	UNIPHIER_CLK_FACTOR("nand-200m", -1, "spll", 1, 8),		\
 	UNIPHIER_CLK_GATE("nand", (idx), "nand-200m", 0x2104, 2)
 
@@ -45,7 +45,7 @@
 #define UNIPHIER_LD11_SYS_CLK_EMMC(idx)					\
 	UNIPHIER_CLK_GATE("emmc", (idx), NULL, 0x210c, 2)
 
-#define UNIPHIER_SLD3_SYS_CLK_STDMAC(idx)				\
+#define UNIPHIER_LD4_SYS_CLK_STDMAC(idx)				\
 	UNIPHIER_CLK_GATE("stdmac", (idx), NULL, 0x2104, 10)
 
 #define UNIPHIER_LD11_SYS_CLK_STDMAC(idx)				\
@@ -57,20 +57,6 @@
 #define UNIPHIER_PRO4_SYS_CLK_USB3(idx, ch)				\
 	UNIPHIER_CLK_GATE("usb3" #ch, (idx), NULL, 0x2104, 16 + (ch))
 
-const struct uniphier_clk_data uniphier_sld3_sys_clk_data[] = {
-	UNIPHIER_CLK_FACTOR("spll", -1, "ref", 65, 1),		/* 1597.44 MHz */
-	UNIPHIER_CLK_FACTOR("upll", -1, "ref", 6000, 512),	/* 288 MHz */
-	UNIPHIER_CLK_FACTOR("a2pll", -1, "ref", 24, 1),		/* 589.824 MHz */
-	UNIPHIER_CLK_FACTOR("vpll27a", -1, "ref", 5625, 512),	/* 270 MHz */
-	UNIPHIER_CLK_FACTOR("uart", 0, "a2pll", 1, 16),
-	UNIPHIER_CLK_FACTOR("i2c", 1, "spll", 1, 16),
-	UNIPHIER_SLD3_SYS_CLK_NAND(2),
-	UNIPHIER_SLD3_SYS_CLK_SD,
-	UNIPHIER_CLK_FACTOR("usb2", -1, "upll", 1, 12),
-	UNIPHIER_SLD3_SYS_CLK_STDMAC(8),
-	{ /* sentinel */ }
-};
-
 const struct uniphier_clk_data uniphier_ld4_sys_clk_data[] = {
 	UNIPHIER_CLK_FACTOR("spll", -1, "ref", 65, 1),		/* 1597.44 MHz */
 	UNIPHIER_CLK_FACTOR("upll", -1, "ref", 6000, 512),	/* 288 MHz */
@@ -78,10 +64,10 @@ const struct uniphier_clk_data uniphier_ld4_sys_clk_data[] = {
 	UNIPHIER_CLK_FACTOR("vpll27a", -1, "ref", 5625, 512),	/* 270 MHz */
 	UNIPHIER_CLK_FACTOR("uart", 0, "a2pll", 1, 16),
 	UNIPHIER_CLK_FACTOR("i2c", 1, "spll", 1, 16),
-	UNIPHIER_SLD3_SYS_CLK_NAND(2),
-	UNIPHIER_SLD3_SYS_CLK_SD,
+	UNIPHIER_LD4_SYS_CLK_NAND(2),
+	UNIPHIER_LD4_SYS_CLK_SD,
 	UNIPHIER_CLK_FACTOR("usb2", -1, "upll", 1, 12),
-	UNIPHIER_SLD3_SYS_CLK_STDMAC(8),		/* Ether, HSC, MIO */
+	UNIPHIER_LD4_SYS_CLK_STDMAC(8),			/* Ether, HSC, MIO */
 	{ /* sentinel */ }
 };
 
@@ -92,10 +78,10 @@ const struct uniphier_clk_data uniphier_pro4_sys_clk_data[] = {
 	UNIPHIER_CLK_FACTOR("vpll27a", -1, "ref", 270, 25),	/* 270 MHz */
 	UNIPHIER_CLK_FACTOR("uart", 0, "a2pll", 1, 8),
 	UNIPHIER_CLK_FACTOR("i2c", 1, "spll", 1, 32),
-	UNIPHIER_SLD3_SYS_CLK_NAND(2),
-	UNIPHIER_SLD3_SYS_CLK_SD,
+	UNIPHIER_LD4_SYS_CLK_NAND(2),
+	UNIPHIER_LD4_SYS_CLK_SD,
 	UNIPHIER_CLK_FACTOR("usb2", -1, "upll", 1, 12),
-	UNIPHIER_SLD3_SYS_CLK_STDMAC(8),		/* HSC, MIO, RLE */
+	UNIPHIER_LD4_SYS_CLK_STDMAC(8),			/* HSC, MIO, RLE */
 	UNIPHIER_PRO4_SYS_CLK_GIO(12),			/* Ether, SATA, USB3 */
 	UNIPHIER_PRO4_SYS_CLK_USB3(14, 0),
 	UNIPHIER_PRO4_SYS_CLK_USB3(15, 1),
@@ -108,10 +94,10 @@ const struct uniphier_clk_data uniphier_sld8_sys_clk_data[] = {
 	UNIPHIER_CLK_FACTOR("vpll27a", -1, "ref", 270, 25),	/* 270 MHz */
 	UNIPHIER_CLK_FACTOR("uart", 0, "spll", 1, 20),
 	UNIPHIER_CLK_FACTOR("i2c", 1, "spll", 1, 16),
-	UNIPHIER_SLD3_SYS_CLK_NAND(2),
-	UNIPHIER_SLD3_SYS_CLK_SD,
+	UNIPHIER_LD4_SYS_CLK_NAND(2),
+	UNIPHIER_LD4_SYS_CLK_SD,
 	UNIPHIER_CLK_FACTOR("usb2", -1, "upll", 1, 12),
-	UNIPHIER_SLD3_SYS_CLK_STDMAC(8),		/* Ether, HSC, MIO */
+	UNIPHIER_LD4_SYS_CLK_STDMAC(8),			/* Ether, HSC, MIO */
 	{ /* sentinel */ }
 };
 
@@ -123,7 +109,7 @@ const struct uniphier_clk_data uniphier_pro5_sys_clk_data[] = {
 	UNIPHIER_CLK_FACTOR("i2c", 1, "spll", 1, 48),
 	UNIPHIER_PRO5_SYS_CLK_NAND(2),
 	UNIPHIER_PRO5_SYS_CLK_SD,
-	UNIPHIER_SLD3_SYS_CLK_STDMAC(8),			/* HSC */
+	UNIPHIER_LD4_SYS_CLK_STDMAC(8),				/* HSC */
 	UNIPHIER_PRO4_SYS_CLK_GIO(12),				/* PCIe, USB3 */
 	UNIPHIER_PRO4_SYS_CLK_USB3(14, 0),
 	UNIPHIER_PRO4_SYS_CLK_USB3(15, 1),
@@ -136,7 +122,7 @@ const struct uniphier_clk_data uniphier_pxs2_sys_clk_data[] = {
 	UNIPHIER_CLK_FACTOR("i2c", 1, "spll", 1, 48),
 	UNIPHIER_PRO5_SYS_CLK_NAND(2),
 	UNIPHIER_PRO5_SYS_CLK_SD,
-	UNIPHIER_SLD3_SYS_CLK_STDMAC(8),			/* HSC, RLE */
+	UNIPHIER_LD4_SYS_CLK_STDMAC(8),				/* HSC, RLE */
 	/* GIO is always clock-enabled: no function for 0x2104 bit6 */
 	UNIPHIER_PRO4_SYS_CLK_USB3(14, 0),
 	UNIPHIER_PRO4_SYS_CLK_USB3(15, 1),
diff --git a/drivers/clk/uniphier/clk-uniphier.h b/drivers/clk/uniphier/clk-uniphier.h
index 01c16ecec48f..827164093172 100644
--- a/drivers/clk/uniphier/clk-uniphier.h
+++ b/drivers/clk/uniphier/clk-uniphier.h
@@ -147,7 +147,6 @@ struct clk_hw *uniphier_clk_register_mux(struct device *dev,
 					 const char *name,
 				const struct uniphier_clk_mux_data *data);
 
-extern const struct uniphier_clk_data uniphier_sld3_sys_clk_data[];
 extern const struct uniphier_clk_data uniphier_ld4_sys_clk_data[];
 extern const struct uniphier_clk_data uniphier_pro4_sys_clk_data[];
 extern const struct uniphier_clk_data uniphier_sld8_sys_clk_data[];
@@ -155,7 +154,7 @@ extern const struct uniphier_clk_data uniphier_pro5_sys_clk_data[];
 extern const struct uniphier_clk_data uniphier_pxs2_sys_clk_data[];
 extern const struct uniphier_clk_data uniphier_ld11_sys_clk_data[];
 extern const struct uniphier_clk_data uniphier_ld20_sys_clk_data[];
-extern const struct uniphier_clk_data uniphier_sld3_mio_clk_data[];
+extern const struct uniphier_clk_data uniphier_ld4_mio_clk_data[];
 extern const struct uniphier_clk_data uniphier_pro5_sd_clk_data[];
 extern const struct uniphier_clk_data uniphier_ld4_peri_clk_data[];
 extern const struct uniphier_clk_data uniphier_pro4_peri_clk_data[];
-- 
cgit v1.2.3


From 48d5eb619c15847aba6757deb5c2c8badca2aece Mon Sep 17 00:00:00 2001
From: Chen-Yu Tsai <wens@csie.org>
Date: Sun, 23 Jul 2017 18:27:44 +0800
Subject: clk: sunxi-ng: h3: gate then ungate PLL CPU clk after rate change

This patch utilizes the new PLL clk notifier to gate then ungate the
PLL CPU clock after rate changes. This should prevent any system hangs
resulting from cpufreq changes to the clk.

Reported-by: Ondrej Jirman <megous@megous.com>
Fixes: 0577e4853bfb ("clk: sunxi-ng: Add H3 clocks")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Tested-by: Icenowy Zheng <icenowy@aosc.io>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
---
 drivers/clk/sunxi-ng/ccu-sun8i-h3.c | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/drivers/clk/sunxi-ng/ccu-sun8i-h3.c b/drivers/clk/sunxi-ng/ccu-sun8i-h3.c
index 62e4f0d2b2fc..406d0aac9fd6 100644
--- a/drivers/clk/sunxi-ng/ccu-sun8i-h3.c
+++ b/drivers/clk/sunxi-ng/ccu-sun8i-h3.c
@@ -1103,6 +1103,13 @@ static const struct sunxi_ccu_desc sun50i_h5_ccu_desc = {
 	.num_resets	= ARRAY_SIZE(sun50i_h5_ccu_resets),
 };
 
+static struct ccu_pll_nb sun8i_h3_pll_cpu_nb = {
+	.common	= &pll_cpux_clk.common,
+	/* copy from pll_cpux_clk */
+	.enable	= BIT(31),
+	.lock	= BIT(28),
+};
+
 static struct ccu_mux_nb sun8i_h3_cpu_nb = {
 	.common		= &cpux_clk.common,
 	.cm		= &cpux_clk.mux,
@@ -1130,6 +1137,10 @@ static void __init sunxi_h3_h5_ccu_init(struct device_node *node,
 
 	sunxi_ccu_probe(node, reg, desc);
 
+	/* Gate then ungate PLL CPU after any rate changes */
+	ccu_pll_notifier_register(&sun8i_h3_pll_cpu_nb);
+
+	/* Reparent CPU during PLL CPU rate changes */
 	ccu_mux_notifier_register(pll_cpux_clk.common.hw.clk,
 				  &sun8i_h3_cpu_nb);
 }
-- 
cgit v1.2.3


From 913c3d85b4b562e38242765baa95113c8c7f1c14 Mon Sep 17 00:00:00 2001
From: Icenowy Zheng <icenowy@aosc.io>
Date: Sun, 23 Jul 2017 18:27:45 +0800
Subject: clk: sunxi-ng: allow set parent clock (PLL_CPUX) for CPUX clock on H3

The CPUX clock, which is the main clock of the ARM core on Allwinner H3,
can be adjusted by changing the frequency of the PLL_CPUX clock.

Allowing setting parent clock for the CPUX clock, thus the PLL_CPUX
clock can be adjusted when adjusting the CPUX clock.

Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
Fixes: 0577e4853bfb ("clk: sunxi-ng: Add H3 clocks")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---
 drivers/clk/sunxi-ng/ccu-sun8i-h3.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/clk/sunxi-ng/ccu-sun8i-h3.c b/drivers/clk/sunxi-ng/ccu-sun8i-h3.c
index 406d0aac9fd6..4cdbc88f2783 100644
--- a/drivers/clk/sunxi-ng/ccu-sun8i-h3.c
+++ b/drivers/clk/sunxi-ng/ccu-sun8i-h3.c
@@ -135,7 +135,7 @@ static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK(pll_de_clk, "pll-de",
 static const char * const cpux_parents[] = { "osc32k", "osc24M",
 					     "pll-cpux" , "pll-cpux" };
 static SUNXI_CCU_MUX(cpux_clk, "cpux", cpux_parents,
-		     0x050, 16, 2, CLK_IS_CRITICAL);
+		     0x050, 16, 2, CLK_IS_CRITICAL | CLK_SET_RATE_PARENT);
 
 static SUNXI_CCU_M(axi_clk, "axi", "cpux", 0x050, 0, 2, 0);
 
-- 
cgit v1.2.3


From 189621726bc2f66cce670bebaedaa6c57326b25d Mon Sep 17 00:00:00 2001
From: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Date: Fri, 28 Jul 2017 23:13:12 +0200
Subject: clk: meson: meson8b: register the built-in reset controller

The clock controller also includes some reset lines. This patch
implements a reset controller to assert and de-assert these resets.
The reset controller itself is registered early (through
CLK_OF_DECLARE_DRIVER) because it is needed very early in the boot
process (to start the secondary CPU cores).

According to the public S805 datasheet there are two more reset bits
in the HHI_SYS_CPU_CLK_CNTL0 register, which are not implemented by
this patch (as these seem to be unused in Amlogic's vendor Linux kernel
sources and their u-boot tree):
- bit 15: GEN_DIV_SOFT_RESET
- bit 14: SOFT_RESET

All information was taken from the public S805 Datasheet and Amlogic's
vendor GPL kernel sources. This patch is based on an earlier version
submitted by Carlo Caione.

Suggested-by: Carlo Caione <carlo@endlessm.com>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 drivers/clk/meson/Kconfig   |   1 +
 drivers/clk/meson/meson8b.c | 159 ++++++++++++++++++++++++++++++++++++++++----
 drivers/clk/meson/meson8b.h |   9 ++-
 3 files changed, 156 insertions(+), 13 deletions(-)

diff --git a/drivers/clk/meson/Kconfig b/drivers/clk/meson/Kconfig
index 5588f75a8414..d2d0174a6eca 100644
--- a/drivers/clk/meson/Kconfig
+++ b/drivers/clk/meson/Kconfig
@@ -6,6 +6,7 @@ config COMMON_CLK_AMLOGIC
 config COMMON_CLK_MESON8B
 	bool
 	depends on COMMON_CLK_AMLOGIC
+	select RESET_CONTROLLER
 	help
 	  Support for the clock controller on AmLogic S802 (Meson8),
 	  S805 (Meson8b) and S812 (Meson8m2) devices. Say Y if you
diff --git a/drivers/clk/meson/meson8b.c b/drivers/clk/meson/meson8b.c
index 7629aa09472a..469ee8a84898 100644
--- a/drivers/clk/meson/meson8b.c
+++ b/drivers/clk/meson/meson8b.c
@@ -25,6 +25,8 @@
 #include <linux/clk-provider.h>
 #include <linux/of_address.h>
 #include <linux/platform_device.h>
+#include <linux/reset-controller.h>
+#include <linux/slab.h>
 #include <linux/init.h>
 
 #include "clkc.h"
@@ -32,6 +34,13 @@
 
 static DEFINE_SPINLOCK(clk_lock);
 
+static void __iomem *clk_base;
+
+struct meson8b_clk_reset {
+	struct reset_controller_dev reset;
+	void __iomem *base;
+};
+
 static const struct pll_rate_table sys_pll_rate_table[] = {
 	PLL_RATE(312000000, 52, 1, 2),
 	PLL_RATE(336000000, 56, 1, 2),
@@ -691,20 +700,114 @@ static struct clk_divider *const meson8b_clk_dividers[] = {
 	&meson8b_mpeg_clk_div,
 };
 
+static const struct meson8b_clk_reset_line {
+	u32 reg;
+	u8 bit_idx;
+} meson8b_clk_reset_bits[] = {
+	[CLKC_RESET_L2_CACHE_SOFT_RESET] = {
+		.reg = HHI_SYS_CPU_CLK_CNTL0, .bit_idx = 30
+	},
+	[CLKC_RESET_AXI_64_TO_128_BRIDGE_A5_SOFT_RESET] = {
+		.reg = HHI_SYS_CPU_CLK_CNTL0, .bit_idx = 29
+	},
+	[CLKC_RESET_SCU_SOFT_RESET] = {
+		.reg = HHI_SYS_CPU_CLK_CNTL0, .bit_idx = 28
+	},
+	[CLKC_RESET_CPU3_SOFT_RESET] = {
+		.reg = HHI_SYS_CPU_CLK_CNTL0, .bit_idx = 27
+	},
+	[CLKC_RESET_CPU2_SOFT_RESET] = {
+		.reg = HHI_SYS_CPU_CLK_CNTL0, .bit_idx = 26
+	},
+	[CLKC_RESET_CPU1_SOFT_RESET] = {
+		.reg = HHI_SYS_CPU_CLK_CNTL0, .bit_idx = 25
+	},
+	[CLKC_RESET_CPU0_SOFT_RESET] = {
+		.reg = HHI_SYS_CPU_CLK_CNTL0, .bit_idx = 24
+	},
+	[CLKC_RESET_A5_GLOBAL_RESET] = {
+		.reg = HHI_SYS_CPU_CLK_CNTL0, .bit_idx = 18
+	},
+	[CLKC_RESET_A5_AXI_SOFT_RESET] = {
+		.reg = HHI_SYS_CPU_CLK_CNTL0, .bit_idx = 17
+	},
+	[CLKC_RESET_A5_ABP_SOFT_RESET] = {
+		.reg = HHI_SYS_CPU_CLK_CNTL0, .bit_idx = 16
+	},
+	[CLKC_RESET_AXI_64_TO_128_BRIDGE_MMC_SOFT_RESET] = {
+		.reg = HHI_SYS_CPU_CLK_CNTL1, .bit_idx = 30
+	},
+	[CLKC_RESET_VID_CLK_CNTL_SOFT_RESET] = {
+		.reg = HHI_VID_CLK_CNTL, .bit_idx = 15
+	},
+	[CLKC_RESET_VID_DIVIDER_CNTL_SOFT_RESET_POST] = {
+		.reg = HHI_VID_DIVIDER_CNTL, .bit_idx = 7
+	},
+	[CLKC_RESET_VID_DIVIDER_CNTL_SOFT_RESET_PRE] = {
+		.reg = HHI_VID_DIVIDER_CNTL, .bit_idx = 3
+	},
+	[CLKC_RESET_VID_DIVIDER_CNTL_RESET_N_POST] = {
+		.reg = HHI_VID_DIVIDER_CNTL, .bit_idx = 1
+	},
+	[CLKC_RESET_VID_DIVIDER_CNTL_RESET_N_PRE] = {
+		.reg = HHI_VID_DIVIDER_CNTL, .bit_idx = 0
+	},
+};
+
+static int meson8b_clk_reset_update(struct reset_controller_dev *rcdev,
+				    unsigned long id, bool assert)
+{
+	struct meson8b_clk_reset *meson8b_clk_reset =
+		container_of(rcdev, struct meson8b_clk_reset, reset);
+	unsigned long flags;
+	const struct meson8b_clk_reset_line *reset;
+	u32 val;
+
+	if (id >= ARRAY_SIZE(meson8b_clk_reset_bits))
+		return -EINVAL;
+
+	reset = &meson8b_clk_reset_bits[id];
+
+	spin_lock_irqsave(&clk_lock, flags);
+
+	val = readl(meson8b_clk_reset->base + reset->reg);
+	if (assert)
+		val |= BIT(reset->bit_idx);
+	else
+		val &= ~BIT(reset->bit_idx);
+	writel(val, meson8b_clk_reset->base + reset->reg);
+
+	spin_unlock_irqrestore(&clk_lock, flags);
+
+	return 0;
+}
+
+static int meson8b_clk_reset_assert(struct reset_controller_dev *rcdev,
+				     unsigned long id)
+{
+	return meson8b_clk_reset_update(rcdev, id, true);
+}
+
+static int meson8b_clk_reset_deassert(struct reset_controller_dev *rcdev,
+				       unsigned long id)
+{
+	return meson8b_clk_reset_update(rcdev, id, false);
+}
+
+static const struct reset_control_ops meson8b_clk_reset_ops = {
+	.assert = meson8b_clk_reset_assert,
+	.deassert = meson8b_clk_reset_deassert,
+};
+
 static int meson8b_clkc_probe(struct platform_device *pdev)
 {
-	void __iomem *clk_base;
 	int ret, clkid, i;
 	struct clk_hw *parent_hw;
 	struct clk *parent_clk;
 	struct device *dev = &pdev->dev;
 
-	/*  Generic clocks and PLLs */
-	clk_base = of_iomap(dev->of_node, 1);
-	if (!clk_base) {
-		pr_err("%s: Unable to map clk base\n", __func__);
+	if (!clk_base)
 		return -ENXIO;
-	}
 
 	/* Populate base address for PLLs */
 	for (i = 0; i < ARRAY_SIZE(meson8b_clk_plls); i++)
@@ -744,7 +847,7 @@ static int meson8b_clkc_probe(struct platform_device *pdev)
 		/* FIXME convert to devm_clk_register */
 		ret = devm_clk_hw_register(dev, meson8b_hw_onecell_data.hws[clkid]);
 		if (ret)
-			goto iounmap;
+			return ret;
 	}
 
 	/*
@@ -767,15 +870,11 @@ static int meson8b_clkc_probe(struct platform_device *pdev)
 	if (ret) {
 		pr_err("%s: failed to register clock notifier for cpu_clk\n",
 				__func__);
-		goto iounmap;
+		return ret;
 	}
 
 	return of_clk_add_hw_provider(dev->of_node, of_clk_hw_onecell_get,
 			&meson8b_hw_onecell_data);
-
-iounmap:
-	iounmap(clk_base);
-	return ret;
 }
 
 static const struct of_device_id meson8b_clkc_match_table[] = {
@@ -794,3 +893,39 @@ static struct platform_driver meson8b_driver = {
 };
 
 builtin_platform_driver(meson8b_driver);
+
+static void __init meson8b_clkc_reset_init(struct device_node *np)
+{
+	struct meson8b_clk_reset *rstc;
+	int ret;
+
+	/* Generic clocks, PLLs and some of the reset-bits */
+	clk_base = of_iomap(np, 1);
+	if (!clk_base) {
+		pr_err("%s: Unable to map clk base\n", __func__);
+		return;
+	}
+
+	rstc = kzalloc(sizeof(*rstc), GFP_KERNEL);
+	if (!rstc)
+		return;
+
+	/* Reset Controller */
+	rstc->base = clk_base;
+	rstc->reset.ops = &meson8b_clk_reset_ops;
+	rstc->reset.nr_resets = ARRAY_SIZE(meson8b_clk_reset_bits);
+	rstc->reset.of_node = np;
+	ret = reset_controller_register(&rstc->reset);
+	if (ret) {
+		pr_err("%s: Failed to register clkc reset controller: %d\n",
+		       __func__, ret);
+		return;
+	}
+}
+
+CLK_OF_DECLARE_DRIVER(meson8_clkc, "amlogic,meson8-clkc",
+		      meson8b_clkc_reset_init);
+CLK_OF_DECLARE_DRIVER(meson8b_clkc, "amlogic,meson8b-clkc",
+		      meson8b_clkc_reset_init);
+CLK_OF_DECLARE_DRIVER(meson8m2_clkc, "amlogic,meson8m2-clkc",
+		      meson8b_clkc_reset_init);
diff --git a/drivers/clk/meson/meson8b.h b/drivers/clk/meson/meson8b.h
index c139bb3273ca..2eaf8a52e7dd 100644
--- a/drivers/clk/meson/meson8b.h
+++ b/drivers/clk/meson/meson8b.h
@@ -37,6 +37,9 @@
 #define HHI_GCLK_AO			0x154 /* 0x55 offset in data sheet */
 #define HHI_SYS_CPU_CLK_CNTL1		0x15c /* 0x57 offset in data sheet */
 #define HHI_MPEG_CLK_CNTL		0x174 /* 0x5d offset in data sheet */
+#define HHI_VID_CLK_CNTL		0x17c /* 0x5f offset in data sheet */
+#define HHI_VID_DIVIDER_CNTL		0x198 /* 0x66 offset in data sheet */
+#define HHI_SYS_CPU_CLK_CNTL0		0x19c /* 0x67 offset in data sheet */
 #define HHI_MPLL_CNTL			0x280 /* 0xa0 offset in data sheet */
 #define HHI_SYS_PLL_CNTL		0x300 /* 0xc0 offset in data sheet */
 #define HHI_VID_PLL_CNTL		0x320 /* 0xc8 offset in data sheet */
@@ -68,7 +71,11 @@
 
 #define CLK_NR_CLKS		96
 
-/* include the CLKIDs that have been made part of the stable DT binding */
+/*
+ * include the CLKID and RESETID that have
+ * been made part of the stable DT binding
+ */
 #include <dt-bindings/clock/meson8b-clkc.h>
+#include <dt-bindings/reset/amlogic,meson8b-clkc-reset.h>
 
 #endif /* __MESON8B_H */
-- 
cgit v1.2.3


From 004f6f462d4127350fce1a2822d00990baedf3a0 Mon Sep 17 00:00:00 2001
From: Jerome Brunet <jbrunet@baylibre.com>
Date: Thu, 27 Jul 2017 15:09:39 +0200
Subject: clk: meson: gxbb: fix meson cts_amclk divider flags

CLK_DIVIDER_ROUND_CLOSEST was incorrectly put in the hw.init flags
while it should have been in the divider flags

Fixes: 4087bd4b2170 ("clk: meson: gxbb: add cts_amclk")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 drivers/clk/meson/gxbb.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/clk/meson/gxbb.c b/drivers/clk/meson/gxbb.c
index 8409d86cda24..0bd028adadd5 100644
--- a/drivers/clk/meson/gxbb.c
+++ b/drivers/clk/meson/gxbb.c
@@ -845,13 +845,14 @@ static struct meson_clk_audio_divider gxbb_cts_amclk_div = {
 		.shift   = 0,
 		.width   = 8,
 	},
+	.flags = CLK_DIVIDER_ROUND_CLOSEST,
 	.lock = &clk_lock,
 	.hw.init = &(struct clk_init_data){
 		.name = "cts_amclk_div",
 		.ops = &meson_clk_audio_divider_ops,
 		.parent_names = (const char *[]){ "cts_amclk_sel" },
 		.num_parents = 1,
-		.flags = CLK_SET_RATE_PARENT | CLK_DIVIDER_ROUND_CLOSEST,
+		.flags = CLK_SET_RATE_PARENT,
 	},
 };
 
-- 
cgit v1.2.3


From 7605aa5b4198ad819dde7c39b3c968f57ccb568e Mon Sep 17 00:00:00 2001
From: Jerome Brunet <jbrunet@baylibre.com>
Date: Thu, 27 Jul 2017 15:09:40 +0200
Subject: clk: meson: gxbb: fix clk_mclk_i958 divider flags

CLK_DIVIDER_ROUND_CLOSEST was incorrectly put in the hw.init flags
while it should have been in the divider flags

Fixes: 3c277c247eab ("clk: meson: gxbb: add cts_mclk_i958")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 drivers/clk/meson/gxbb.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/clk/meson/gxbb.c b/drivers/clk/meson/gxbb.c
index 0bd028adadd5..60342cfb0bf6 100644
--- a/drivers/clk/meson/gxbb.c
+++ b/drivers/clk/meson/gxbb.c
@@ -876,7 +876,7 @@ static struct clk_mux gxbb_cts_mclk_i958_sel = {
 	/* Default parent unknown (register reset value: 0) */
 	.table = (u32[]){ 1, 2, 3 },
 	.lock = &clk_lock,
-		.hw.init = &(struct clk_init_data){
+	.hw.init = &(struct clk_init_data) {
 		.name = "cts_mclk_i958_sel",
 		.ops = &clk_mux_ops,
 		.parent_names = (const char *[]){ "mpll0", "mpll1", "mpll2" },
@@ -890,12 +890,13 @@ static struct clk_divider gxbb_cts_mclk_i958_div = {
 	.shift = 16,
 	.width = 8,
 	.lock = &clk_lock,
-	.hw.init = &(struct clk_init_data){
+	.flags = CLK_DIVIDER_ROUND_CLOSEST,
+	.hw.init = &(struct clk_init_data) {
 		.name = "cts_mclk_i958_div",
 		.ops = &clk_divider_ops,
 		.parent_names = (const char *[]){ "cts_mclk_i958_sel" },
 		.num_parents = 1,
-		.flags = CLK_SET_RATE_PARENT | CLK_DIVIDER_ROUND_CLOSEST,
+		.flags = CLK_SET_RATE_PARENT,
 	},
 };
 
-- 
cgit v1.2.3


From 914e6e80b3a5950bc6baedbe8d60377ceb99c9c7 Mon Sep 17 00:00:00 2001
From: Jerome Brunet <jbrunet@baylibre.com>
Date: Mon, 31 Jul 2017 13:56:03 +0200
Subject: clk: meson: gxbb: Add sd_emmc clk0 clocks

Input source 0 of the mmc controllers is not directly xtal, as currently
described in DT. Each controller is fed by a composite clock (the usual
mux, divider and gate). The muxes inputs are the xtal (default) and the
fclk_div clocks. These parents, along with the divider, should be able to
provide the necessary rates for mmc and nand operation.

The input muxes should also be able to take mpll2, mpll3 and gp0_pll but
these are precious clocks, needed for other usage. It is better if the
mmc does not use these them. For this reason, mpll2, mpll3 and gp0_pll is
not listed among the possible parents.

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 drivers/clk/meson/gxbb.c | 177 +++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 177 insertions(+)

diff --git a/drivers/clk/meson/gxbb.c b/drivers/clk/meson/gxbb.c
index 60342cfb0bf6..bb04a307f692 100644
--- a/drivers/clk/meson/gxbb.c
+++ b/drivers/clk/meson/gxbb.c
@@ -976,6 +976,156 @@ static struct clk_mux gxbb_32k_clk_sel = {
 	},
 };
 
+static const char * const gxbb_sd_emmc_clk0_parent_names[] = {
+	"xtal", "fclk_div2", "fclk_div3", "fclk_div5", "fclk_div7",
+
+	/*
+	 * Following these parent clocks, we should also have had mpll2, mpll3
+	 * and gp0_pll but these clocks are too precious to be used here. All
+	 * the necessary rates for MMC and NAND operation can be acheived using
+	 * xtal or fclk_div clocks
+	 */
+};
+
+/* SDIO clock */
+static struct clk_mux gxbb_sd_emmc_a_clk0_sel = {
+	.reg = (void *)HHI_SD_EMMC_CLK_CNTL,
+	.mask = 0x7,
+	.shift = 9,
+	.lock = &clk_lock,
+	.hw.init = &(struct clk_init_data) {
+		.name = "sd_emmc_a_clk0_sel",
+		.ops = &clk_mux_ops,
+		.parent_names = gxbb_sd_emmc_clk0_parent_names,
+		.num_parents = ARRAY_SIZE(gxbb_sd_emmc_clk0_parent_names),
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_divider gxbb_sd_emmc_a_clk0_div = {
+	.reg = (void *)HHI_SD_EMMC_CLK_CNTL,
+	.shift = 0,
+	.width = 7,
+	.lock = &clk_lock,
+	.flags = CLK_DIVIDER_ROUND_CLOSEST,
+	.hw.init = &(struct clk_init_data) {
+		.name = "sd_emmc_a_clk0_div",
+		.ops = &clk_divider_ops,
+		.parent_names = (const char *[]){ "sd_emmc_a_clk0_sel" },
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_gate gxbb_sd_emmc_a_clk0 = {
+	.reg = (void *)HHI_SD_EMMC_CLK_CNTL,
+	.bit_idx = 7,
+	.lock = &clk_lock,
+	.hw.init = &(struct clk_init_data){
+		.name = "sd_emmc_a_clk0",
+		.ops = &clk_gate_ops,
+		.parent_names = (const char *[]){ "sd_emmc_a_clk0_div" },
+		.num_parents = 1,
+
+		/*
+		 * FIXME:
+		 * We need CLK_IGNORE_UNUSED because mmc DT node point to xtal
+		 * instead of this clock. CCF would gate this on boot, killing
+		 * the mmc controller. Please remove this flag once DT properly
+		 * point to this clock instead of xtal
+		 *
+		 * Same goes for emmc B and C clocks
+		 */
+		.flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
+	},
+};
+
+/* SDcard clock */
+static struct clk_mux gxbb_sd_emmc_b_clk0_sel = {
+	.reg = (void *)HHI_SD_EMMC_CLK_CNTL,
+	.mask = 0x7,
+	.shift = 25,
+	.lock = &clk_lock,
+	.hw.init = &(struct clk_init_data) {
+		.name = "sd_emmc_b_clk0_sel",
+		.ops = &clk_mux_ops,
+		.parent_names = gxbb_sd_emmc_clk0_parent_names,
+		.num_parents = ARRAY_SIZE(gxbb_sd_emmc_clk0_parent_names),
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_divider gxbb_sd_emmc_b_clk0_div = {
+	.reg = (void *)HHI_SD_EMMC_CLK_CNTL,
+	.shift = 16,
+	.width = 7,
+	.lock = &clk_lock,
+	.flags = CLK_DIVIDER_ROUND_CLOSEST,
+	.hw.init = &(struct clk_init_data) {
+		.name = "sd_emmc_b_clk0_div",
+		.ops = &clk_divider_ops,
+		.parent_names = (const char *[]){ "sd_emmc_b_clk0_sel" },
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_gate gxbb_sd_emmc_b_clk0 = {
+	.reg = (void *)HHI_SD_EMMC_CLK_CNTL,
+	.bit_idx = 23,
+	.lock = &clk_lock,
+	.hw.init = &(struct clk_init_data){
+		.name = "sd_emmc_b_clk0",
+		.ops = &clk_gate_ops,
+		.parent_names = (const char *[]){ "sd_emmc_b_clk0_div" },
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
+	},
+};
+
+/* EMMC/NAND clock */
+static struct clk_mux gxbb_sd_emmc_c_clk0_sel = {
+	.reg = (void *)HHI_NAND_CLK_CNTL,
+	.mask = 0x7,
+	.shift = 9,
+	.lock = &clk_lock,
+	.hw.init = &(struct clk_init_data) {
+		.name = "sd_emmc_c_clk0_sel",
+		.ops = &clk_mux_ops,
+		.parent_names = gxbb_sd_emmc_clk0_parent_names,
+		.num_parents = ARRAY_SIZE(gxbb_sd_emmc_clk0_parent_names),
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_divider gxbb_sd_emmc_c_clk0_div = {
+	.reg = (void *)HHI_NAND_CLK_CNTL,
+	.shift = 0,
+	.width = 7,
+	.lock = &clk_lock,
+	.flags = CLK_DIVIDER_ROUND_CLOSEST,
+	.hw.init = &(struct clk_init_data) {
+		.name = "sd_emmc_c_clk0_div",
+		.ops = &clk_divider_ops,
+		.parent_names = (const char *[]){ "sd_emmc_c_clk0_sel" },
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_gate gxbb_sd_emmc_c_clk0 = {
+	.reg = (void *)HHI_NAND_CLK_CNTL,
+	.bit_idx = 7,
+	.lock = &clk_lock,
+	.hw.init = &(struct clk_init_data){
+		.name = "sd_emmc_c_clk0",
+		.ops = &clk_gate_ops,
+		.parent_names = (const char *[]){ "sd_emmc_c_clk0_div" },
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
+	},
+};
+
 /* Everything Else (EE) domain gates */
 static MESON_GATE(gxbb_ddr, HHI_GCLK_MPEG0, 0);
 static MESON_GATE(gxbb_dos, HHI_GCLK_MPEG0, 1);
@@ -1185,6 +1335,15 @@ static struct clk_hw_onecell_data gxbb_hw_onecell_data = {
 		[CLKID_32K_CLK]		    = &gxbb_32k_clk.hw,
 		[CLKID_32K_CLK_SEL]	    = &gxbb_32k_clk_sel.hw,
 		[CLKID_32K_CLK_DIV]	    = &gxbb_32k_clk_div.hw,
+		[CLKID_SD_EMMC_A_CLK0_SEL]  = &gxbb_sd_emmc_a_clk0_sel.hw,
+		[CLKID_SD_EMMC_A_CLK0_DIV]  = &gxbb_sd_emmc_a_clk0_div.hw,
+		[CLKID_SD_EMMC_A_CLK0]	    = &gxbb_sd_emmc_a_clk0.hw,
+		[CLKID_SD_EMMC_B_CLK0_SEL]  = &gxbb_sd_emmc_b_clk0_sel.hw,
+		[CLKID_SD_EMMC_B_CLK0_DIV]  = &gxbb_sd_emmc_b_clk0_div.hw,
+		[CLKID_SD_EMMC_B_CLK0]	    = &gxbb_sd_emmc_b_clk0.hw,
+		[CLKID_SD_EMMC_C_CLK0_SEL]  = &gxbb_sd_emmc_c_clk0_sel.hw,
+		[CLKID_SD_EMMC_C_CLK0_DIV]  = &gxbb_sd_emmc_c_clk0_div.hw,
+		[CLKID_SD_EMMC_C_CLK0]	    = &gxbb_sd_emmc_c_clk0.hw,
 		[NR_CLKS]		    = NULL,
 	},
 	.num = NR_CLKS,
@@ -1308,6 +1467,15 @@ static struct clk_hw_onecell_data gxl_hw_onecell_data = {
 		[CLKID_32K_CLK]		    = &gxbb_32k_clk.hw,
 		[CLKID_32K_CLK_SEL]	    = &gxbb_32k_clk_sel.hw,
 		[CLKID_32K_CLK_DIV]	    = &gxbb_32k_clk_div.hw,
+		[CLKID_SD_EMMC_A_CLK0_SEL]  = &gxbb_sd_emmc_a_clk0_sel.hw,
+		[CLKID_SD_EMMC_A_CLK0_DIV]  = &gxbb_sd_emmc_a_clk0_div.hw,
+		[CLKID_SD_EMMC_A_CLK0]	    = &gxbb_sd_emmc_a_clk0.hw,
+		[CLKID_SD_EMMC_B_CLK0_SEL]  = &gxbb_sd_emmc_b_clk0_sel.hw,
+		[CLKID_SD_EMMC_B_CLK0_DIV]  = &gxbb_sd_emmc_b_clk0_div.hw,
+		[CLKID_SD_EMMC_B_CLK0]	    = &gxbb_sd_emmc_b_clk0.hw,
+		[CLKID_SD_EMMC_C_CLK0_SEL]  = &gxbb_sd_emmc_c_clk0_sel.hw,
+		[CLKID_SD_EMMC_C_CLK0_DIV]  = &gxbb_sd_emmc_c_clk0_div.hw,
+		[CLKID_SD_EMMC_C_CLK0]	    = &gxbb_sd_emmc_c_clk0.hw,
 		[NR_CLKS]		    = NULL,
 	},
 	.num = NR_CLKS,
@@ -1424,6 +1592,9 @@ static struct clk_gate *const gxbb_clk_gates[] = {
 	&gxbb_cts_amclk,
 	&gxbb_cts_mclk_i958,
 	&gxbb_32k_clk,
+	&gxbb_sd_emmc_a_clk0,
+	&gxbb_sd_emmc_b_clk0,
+	&gxbb_sd_emmc_c_clk0,
 };
 
 static struct clk_mux *const gxbb_clk_muxes[] = {
@@ -1436,6 +1607,9 @@ static struct clk_mux *const gxbb_clk_muxes[] = {
 	&gxbb_cts_mclk_i958_sel,
 	&gxbb_cts_i958,
 	&gxbb_32k_clk_sel,
+	&gxbb_sd_emmc_a_clk0_sel,
+	&gxbb_sd_emmc_b_clk0_sel,
+	&gxbb_sd_emmc_c_clk0_sel,
 };
 
 static struct clk_divider *const gxbb_clk_dividers[] = {
@@ -1445,6 +1619,9 @@ static struct clk_divider *const gxbb_clk_dividers[] = {
 	&gxbb_mali_1_div,
 	&gxbb_cts_mclk_i958_div,
 	&gxbb_32k_clk_div,
+	&gxbb_sd_emmc_a_clk0_div,
+	&gxbb_sd_emmc_b_clk0_div,
+	&gxbb_sd_emmc_c_clk0_div,
 };
 
 static struct meson_clk_audio_divider *const gxbb_audio_dividers[] = {
-- 
cgit v1.2.3


From 3b3025625fa41b79f4e729e9365e4f8564de7cdf Mon Sep 17 00:00:00 2001
From: Neil Armstrong <narmstrong@baylibre.com>
Date: Tue, 1 Aug 2017 13:56:56 +0200
Subject: dt-bindings: clock: amlogic, gxbb-aoclkc: Update bindings

On the first revision of the bindings, only the gates + resets were known
in the AO Clock HW, but more registers used to configures AO clock are known
to be spread among the AO register space.
This patch adds a parent node for the entire system control zone for the AO
domain then moves the clock controller as a subnode of the system control
node.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 .../bindings/clock/amlogic,gxbb-aoclkc.txt         | 22 ++++++++++++++++------
 1 file changed, 16 insertions(+), 6 deletions(-)

diff --git a/Documentation/devicetree/bindings/clock/amlogic,gxbb-aoclkc.txt b/Documentation/devicetree/bindings/clock/amlogic,gxbb-aoclkc.txt
index a55d31b48d6e..64884ede4938 100644
--- a/Documentation/devicetree/bindings/clock/amlogic,gxbb-aoclkc.txt
+++ b/Documentation/devicetree/bindings/clock/amlogic,gxbb-aoclkc.txt
@@ -5,9 +5,11 @@ controllers within the Always-On part of the SoC.
 
 Required Properties:
 
-- compatible: should be "amlogic,gxbb-aoclkc"
-- reg: physical base address of the clock controller and length of memory
-       mapped region.
+- compatible: value should be different for each SoC family as :
+	- GXBB (S905) : "amlogic,meson-gxbb-aoclkc"
+	- GXL (S905X, S905D) : "amlogic,meson-gxl-aoclkc"
+	- GXM (S912) : "amlogic,meson-gxm-aoclkc"
+	followed by the common "amlogic,meson-gx-aoclkc"
 
 - #clock-cells: should be 1.
 
@@ -23,14 +25,22 @@ to specify the reset which they consume. All available resets are defined as
 preprocessor macros in the dt-bindings/reset/gxbb-aoclkc.h header and can be
 used in device tree sources.
 
+Parent node should have the following properties :
+- compatible: "amlogic,meson-gx-ao-sysctrl", "syscon", "simple-mfd"
+- reg: base address and size of the AO system control register space.
+
 Example: AO Clock controller node:
 
-	clkc_AO: clock-controller@040 {
-		compatible = "amlogic,gxbb-aoclkc";
-		reg = <0x0 0x040 0x0 0x4>;
+ao_sysctrl: sys-ctrl@0 {
+	compatible = "amlogic,meson-gx-ao-sysctrl", "syscon", "simple-mfd";
+	reg =  <0x0 0x0 0x0 0x100>;
+
+	clkc_AO: clock-controller {
+		compatible = "amlogic,meson-gxbb-aoclkc", "amlogic,meson-gx-aoclkc";
 		#clock-cells = <1>;
 		#reset-cells = <1>;
 	};
+};
 
 Example: UART controller node that consumes the clock and reset generated
   by the clock controller:
-- 
cgit v1.2.3


From ffb13e3b84f4619ec6a4ca61a6cedf2d50858949 Mon Sep 17 00:00:00 2001
From: Neil Armstrong <narmstrong@baylibre.com>
Date: Tue, 1 Aug 2017 13:56:57 +0200
Subject: clk: meson: gxbb-aoclk: Switch to regmap for register access

Switch the aoclk driver to use the new bindings and switch all the
registers access to regmap only.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 drivers/clk/meson/Makefile            |  2 +-
 drivers/clk/meson/gxbb-aoclk-regmap.c | 46 +++++++++++++++++++++++++++++++++++
 drivers/clk/meson/gxbb-aoclk.c        | 44 ++++++++++++++++-----------------
 drivers/clk/meson/gxbb-aoclk.h        | 26 ++++++++++++++++++++
 4 files changed, 95 insertions(+), 23 deletions(-)
 create mode 100644 drivers/clk/meson/gxbb-aoclk-regmap.c
 create mode 100644 drivers/clk/meson/gxbb-aoclk.h

diff --git a/drivers/clk/meson/Makefile b/drivers/clk/meson/Makefile
index 83b6d9d65aa1..de65427efe9b 100644
--- a/drivers/clk/meson/Makefile
+++ b/drivers/clk/meson/Makefile
@@ -4,4 +4,4 @@
 
 obj-$(CONFIG_COMMON_CLK_AMLOGIC) += clk-pll.o clk-cpu.o clk-mpll.o clk-audio-divider.o
 obj-$(CONFIG_COMMON_CLK_MESON8B) += meson8b.o
-obj-$(CONFIG_COMMON_CLK_GXBB)	 += gxbb.o gxbb-aoclk.o
+obj-$(CONFIG_COMMON_CLK_GXBB)	 += gxbb.o gxbb-aoclk.o gxbb-aoclk-regmap.o
diff --git a/drivers/clk/meson/gxbb-aoclk-regmap.c b/drivers/clk/meson/gxbb-aoclk-regmap.c
new file mode 100644
index 000000000000..2515fbfa0467
--- /dev/null
+++ b/drivers/clk/meson/gxbb-aoclk-regmap.c
@@ -0,0 +1,46 @@
+/*
+ * Copyright (c) 2017 BayLibre, SAS.
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/bitfield.h>
+#include <linux/regmap.h>
+#include "gxbb-aoclk.h"
+
+static int aoclk_gate_regmap_enable(struct clk_hw *hw)
+{
+	struct aoclk_gate_regmap *gate = to_aoclk_gate_regmap(hw);
+
+	return regmap_update_bits(gate->regmap, AO_RTI_GEN_CNTL_REG0,
+				  BIT(gate->bit_idx), BIT(gate->bit_idx));
+}
+
+static void aoclk_gate_regmap_disable(struct clk_hw *hw)
+{
+	struct aoclk_gate_regmap *gate = to_aoclk_gate_regmap(hw);
+
+	regmap_update_bits(gate->regmap, AO_RTI_GEN_CNTL_REG0,
+			   BIT(gate->bit_idx), 0);
+}
+
+static int aoclk_gate_regmap_is_enabled(struct clk_hw *hw)
+{
+	struct aoclk_gate_regmap *gate = to_aoclk_gate_regmap(hw);
+	unsigned int val;
+	int ret;
+
+	ret = regmap_read(gate->regmap, AO_RTI_GEN_CNTL_REG0, &val);
+	if (ret)
+		return ret;
+
+	return (val & BIT(gate->bit_idx)) != 0;
+}
+
+const struct clk_ops meson_aoclk_gate_regmap_ops = {
+	.enable = aoclk_gate_regmap_enable,
+	.disable = aoclk_gate_regmap_disable,
+	.is_enabled = aoclk_gate_regmap_is_enabled,
+};
diff --git a/drivers/clk/meson/gxbb-aoclk.c b/drivers/clk/meson/gxbb-aoclk.c
index b45c5fba7e35..f61506c53089 100644
--- a/drivers/clk/meson/gxbb-aoclk.c
+++ b/drivers/clk/meson/gxbb-aoclk.c
@@ -56,16 +56,19 @@
 #include <linux/of_address.h>
 #include <linux/platform_device.h>
 #include <linux/reset-controller.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regmap.h>
 #include <linux/init.h>
 #include <dt-bindings/clock/gxbb-aoclkc.h>
 #include <dt-bindings/reset/gxbb-aoclkc.h>
+#include "gxbb-aoclk.h"
 
 static DEFINE_SPINLOCK(gxbb_aoclk_lock);
 
 struct gxbb_aoclk_reset_controller {
 	struct reset_controller_dev reset;
 	unsigned int *data;
-	void __iomem *base;
+	struct regmap *regmap;
 };
 
 static int gxbb_aoclk_do_reset(struct reset_controller_dev *rcdev,
@@ -74,9 +77,8 @@ static int gxbb_aoclk_do_reset(struct reset_controller_dev *rcdev,
 	struct gxbb_aoclk_reset_controller *reset =
 		container_of(rcdev, struct gxbb_aoclk_reset_controller, reset);
 
-	writel(BIT(reset->data[id]), reset->base);
-
-	return 0;
+	return regmap_write(reset->regmap, AO_RTI_GEN_CNTL_REG0,
+			    BIT(reset->data[id]));
 }
 
 static const struct reset_control_ops gxbb_aoclk_reset_ops = {
@@ -84,13 +86,12 @@ static const struct reset_control_ops gxbb_aoclk_reset_ops = {
 };
 
 #define GXBB_AO_GATE(_name, _bit)					\
-static struct clk_gate _name##_ao = {					\
-	.reg = (void __iomem *)0,					\
+static struct aoclk_gate_regmap _name##_ao = {				\
 	.bit_idx = (_bit),						\
 	.lock = &gxbb_aoclk_lock,					\
 	.hw.init = &(struct clk_init_data) {				\
 		.name = #_name "_ao",					\
-		.ops = &clk_gate_ops,					\
+		.ops = &meson_aoclk_gate_regmap_ops,			\
 		.parent_names = (const char *[]){ "clk81" },		\
 		.num_parents = 1,					\
 		.flags = (CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED),	\
@@ -113,7 +114,7 @@ static unsigned int gxbb_aoclk_reset[] = {
 	[RESET_AO_IR_BLASTER] = 23,
 };
 
-static struct clk_gate *gxbb_aoclk_gate[] = {
+static struct aoclk_gate_regmap *gxbb_aoclk_gate[] = {
 	[CLKID_AO_REMOTE] = &remote_ao,
 	[CLKID_AO_I2C_MASTER] = &i2c_master_ao,
 	[CLKID_AO_I2C_SLAVE] = &i2c_slave_ao,
@@ -136,24 +137,23 @@ static struct clk_hw_onecell_data gxbb_aoclk_onecell_data = {
 
 static int gxbb_aoclkc_probe(struct platform_device *pdev)
 {
-	struct resource *res;
-	void __iomem *base;
-	int ret, clkid;
-	struct device *dev = &pdev->dev;
 	struct gxbb_aoclk_reset_controller *rstc;
+	struct device *dev = &pdev->dev;
+	struct regmap *regmap;
+	int ret, clkid;
 
 	rstc = devm_kzalloc(dev, sizeof(*rstc), GFP_KERNEL);
 	if (!rstc)
 		return -ENOMEM;
 
-	/* Generic clocks */
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	base = devm_ioremap_resource(dev, res);
-	if (IS_ERR(base))
-		return PTR_ERR(base);
+	regmap = syscon_node_to_regmap(of_get_parent(dev->of_node));
+	if (IS_ERR(regmap)) {
+		dev_err(dev, "failed to get regmap\n");
+		return -ENODEV;
+	}
 
 	/* Reset Controller */
-	rstc->base = base;
+	rstc->regmap = regmap;
 	rstc->data = gxbb_aoclk_reset;
 	rstc->reset.ops = &gxbb_aoclk_reset_ops;
 	rstc->reset.nr_resets = ARRAY_SIZE(gxbb_aoclk_reset);
@@ -161,10 +161,10 @@ static int gxbb_aoclkc_probe(struct platform_device *pdev)
 	ret = devm_reset_controller_register(dev, &rstc->reset);
 
 	/*
-	 * Populate base address and register all clks
+	 * Populate regmap and register all clks
 	 */
-	for (clkid = 0; clkid < gxbb_aoclk_onecell_data.num; clkid++) {
-		gxbb_aoclk_gate[clkid]->reg = base;
+	for (clkid = 0; clkid < ARRAY_SIZE(gxbb_aoclk_gate); clkid++) {
+		gxbb_aoclk_gate[clkid]->regmap = regmap;
 
 		ret = devm_clk_hw_register(dev,
 					gxbb_aoclk_onecell_data.hws[clkid]);
@@ -177,7 +177,7 @@ static int gxbb_aoclkc_probe(struct platform_device *pdev)
 }
 
 static const struct of_device_id gxbb_aoclkc_match_table[] = {
-	{ .compatible = "amlogic,gxbb-aoclkc" },
+	{ .compatible = "amlogic,meson-gx-aoclkc" },
 	{ }
 };
 
diff --git a/drivers/clk/meson/gxbb-aoclk.h b/drivers/clk/meson/gxbb-aoclk.h
new file mode 100644
index 000000000000..2e26108d5ba6
--- /dev/null
+++ b/drivers/clk/meson/gxbb-aoclk.h
@@ -0,0 +1,26 @@
+/*
+ * Copyright (c) 2017 BayLibre, SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __GXBB_AOCLKC_H
+#define __GXBB_AOCLKC_H
+
+/* AO Configuration Clock registers offsets */
+#define AO_RTI_GEN_CNTL_REG0	0x40
+
+struct aoclk_gate_regmap {
+	struct clk_hw hw;
+	unsigned bit_idx;
+	struct regmap *regmap;
+	spinlock_t *lock;
+};
+
+#define to_aoclk_gate_regmap(_hw) \
+	container_of(_hw, struct aoclk_gate_regmap, hw)
+
+extern const struct clk_ops meson_aoclk_gate_regmap_ops;
+
+#endif /* __GXBB_AOCLKC_H */
-- 
cgit v1.2.3


From 62ec0b9754aced0b4c02694886cbe9bfd3d00f2f Mon Sep 17 00:00:00 2001
From: Neil Armstrong <narmstrong@baylibre.com>
Date: Tue, 1 Aug 2017 13:56:59 +0200
Subject: clk: meson: gxbb-aoclk: Add CEC 32k clock

The CEC 32K AO Clock is a dual divider with dual counter to provide a more
precise 32768Hz clock for the CEC subsystem from the external xtal.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 drivers/clk/meson/Makefile         |   2 +-
 drivers/clk/meson/gxbb-aoclk-32k.c | 194 +++++++++++++++++++++++++++++++++++++
 drivers/clk/meson/gxbb-aoclk.c     |  21 +++-
 drivers/clk/meson/gxbb-aoclk.h     |  16 +++
 4 files changed, 231 insertions(+), 2 deletions(-)
 create mode 100644 drivers/clk/meson/gxbb-aoclk-32k.c

diff --git a/drivers/clk/meson/Makefile b/drivers/clk/meson/Makefile
index de65427efe9b..b139d41b25da 100644
--- a/drivers/clk/meson/Makefile
+++ b/drivers/clk/meson/Makefile
@@ -4,4 +4,4 @@
 
 obj-$(CONFIG_COMMON_CLK_AMLOGIC) += clk-pll.o clk-cpu.o clk-mpll.o clk-audio-divider.o
 obj-$(CONFIG_COMMON_CLK_MESON8B) += meson8b.o
-obj-$(CONFIG_COMMON_CLK_GXBB)	 += gxbb.o gxbb-aoclk.o gxbb-aoclk-regmap.o
+obj-$(CONFIG_COMMON_CLK_GXBB)	 += gxbb.o gxbb-aoclk.o gxbb-aoclk-regmap.o gxbb-aoclk-32k.o
diff --git a/drivers/clk/meson/gxbb-aoclk-32k.c b/drivers/clk/meson/gxbb-aoclk-32k.c
new file mode 100644
index 000000000000..491634dbc985
--- /dev/null
+++ b/drivers/clk/meson/gxbb-aoclk-32k.c
@@ -0,0 +1,194 @@
+/*
+ * Copyright (c) 2017 BayLibre, SAS.
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/bitfield.h>
+#include <linux/regmap.h>
+#include "gxbb-aoclk.h"
+
+/*
+ * The AO Domain embeds a dual/divider to generate a more precise
+ * 32,768KHz clock for low-power suspend mode and CEC.
+ *                      ______   ______
+ *                     |      | |      |
+ *         ______      | Div1 |-| Cnt1 |       ______
+ *        |      |    /|______| |______|\     |      |
+ * Xtal-->| Gate |---|  ______   ______  X-X--| Gate |-->
+ *        |______| |  \|      | |      |/  |  |______|
+ *                 |   | Div2 |-| Cnt2 |   |
+ *                 |   |______| |______|   |
+ *                 |_______________________|
+ *
+ * The dividing can be switched to single or dual, with a counter
+ * for each divider to set when the switching is done.
+ * The entire dividing mechanism can be also bypassed.
+ */
+
+#define CLK_CNTL0_N1_MASK	GENMASK(11, 0)
+#define CLK_CNTL0_N2_MASK	GENMASK(23, 12)
+#define CLK_CNTL0_DUALDIV_EN	BIT(28)
+#define CLK_CNTL0_OUT_GATE_EN	BIT(30)
+#define CLK_CNTL0_IN_GATE_EN	BIT(31)
+
+#define CLK_CNTL1_M1_MASK	GENMASK(11, 0)
+#define CLK_CNTL1_M2_MASK	GENMASK(23, 12)
+#define CLK_CNTL1_BYPASS_EN	BIT(24)
+#define CLK_CNTL1_SELECT_OSC	BIT(27)
+
+#define PWR_CNTL_ALT_32K_SEL	GENMASK(13, 10)
+
+struct cec_32k_freq_table {
+	unsigned long parent_rate;
+	unsigned long target_rate;
+	bool dualdiv;
+	unsigned int n1;
+	unsigned int n2;
+	unsigned int m1;
+	unsigned int m2;
+};
+
+static const struct cec_32k_freq_table aoclk_cec_32k_table[] = {
+	[0] = {
+		.parent_rate = 24000000,
+		.target_rate = 32768,
+		.dualdiv = true,
+		.n1 = 733,
+		.n2 = 732,
+		.m1 = 8,
+		.m2 = 11,
+	},
+};
+
+/*
+ * If CLK_CNTL0_DUALDIV_EN == 0
+ *  - will use N1 divider only
+ * If CLK_CNTL0_DUALDIV_EN == 1
+ *  - hold M1 cycles of N1 divider then changes to N2
+ *  - hold M2 cycles of N2 divider then changes to N1
+ * Then we can get more accurate division.
+ */
+static unsigned long aoclk_cec_32k_recalc_rate(struct clk_hw *hw,
+					       unsigned long parent_rate)
+{
+	struct aoclk_cec_32k *cec_32k = to_aoclk_cec_32k(hw);
+	unsigned long n1;
+	u32 reg0, reg1;
+
+	regmap_read(cec_32k->regmap, AO_RTC_ALT_CLK_CNTL0, &reg0);
+	regmap_read(cec_32k->regmap, AO_RTC_ALT_CLK_CNTL1, &reg1);
+
+	if (reg1 & CLK_CNTL1_BYPASS_EN)
+		return parent_rate;
+
+	if (reg0 & CLK_CNTL0_DUALDIV_EN) {
+		unsigned long n2, m1, m2, f1, f2, p1, p2;
+
+		n1 = FIELD_GET(CLK_CNTL0_N1_MASK, reg0) + 1;
+		n2 = FIELD_GET(CLK_CNTL0_N2_MASK, reg0) + 1;
+
+		m1 = FIELD_GET(CLK_CNTL1_M1_MASK, reg1) + 1;
+		m2 = FIELD_GET(CLK_CNTL1_M2_MASK, reg1) + 1;
+
+		f1 = DIV_ROUND_CLOSEST(parent_rate, n1);
+		f2 = DIV_ROUND_CLOSEST(parent_rate, n2);
+
+		p1 = DIV_ROUND_CLOSEST(100000000 * m1, f1 * (m1 + m2));
+		p2 = DIV_ROUND_CLOSEST(100000000 * m2, f2 * (m1 + m2));
+
+		return DIV_ROUND_UP(100000000, p1 + p2);
+	}
+
+	n1 = FIELD_GET(CLK_CNTL0_N1_MASK, reg0) + 1;
+
+	return DIV_ROUND_CLOSEST(parent_rate, n1);
+}
+
+static const struct cec_32k_freq_table *find_cec_32k_freq(unsigned long rate,
+							  unsigned long prate)
+{
+	int i;
+
+	for (i = 0 ; i < ARRAY_SIZE(aoclk_cec_32k_table) ; ++i)
+		if (aoclk_cec_32k_table[i].parent_rate == prate &&
+		    aoclk_cec_32k_table[i].target_rate == rate)
+			return &aoclk_cec_32k_table[i];
+
+	return NULL;
+}
+
+static long aoclk_cec_32k_round_rate(struct clk_hw *hw, unsigned long rate,
+				     unsigned long *prate)
+{
+	const struct cec_32k_freq_table *freq = find_cec_32k_freq(rate,
+								  *prate);
+
+	/* If invalid return first one */
+	if (!freq)
+		return aoclk_cec_32k_table[0].target_rate;
+
+	return freq->target_rate;
+}
+
+/*
+ * From the Amlogic init procedure, the IN and OUT gates needs to be handled
+ * in the init procedure to avoid any glitches.
+ */
+
+static int aoclk_cec_32k_set_rate(struct clk_hw *hw, unsigned long rate,
+				  unsigned long parent_rate)
+{
+	const struct cec_32k_freq_table *freq = find_cec_32k_freq(rate,
+								  parent_rate);
+	struct aoclk_cec_32k *cec_32k = to_aoclk_cec_32k(hw);
+	u32 reg = 0;
+
+	if (!freq)
+		return -EINVAL;
+
+	/* Disable clock */
+	regmap_update_bits(cec_32k->regmap, AO_RTC_ALT_CLK_CNTL0,
+			   CLK_CNTL0_IN_GATE_EN | CLK_CNTL0_OUT_GATE_EN, 0);
+
+	reg = FIELD_PREP(CLK_CNTL0_N1_MASK, freq->n1 - 1);
+	if (freq->dualdiv)
+		reg |= CLK_CNTL0_DUALDIV_EN |
+		       FIELD_PREP(CLK_CNTL0_N2_MASK, freq->n2 - 1);
+
+	regmap_write(cec_32k->regmap, AO_RTC_ALT_CLK_CNTL0, reg);
+
+	reg = FIELD_PREP(CLK_CNTL1_M1_MASK, freq->m1 - 1);
+	if (freq->dualdiv)
+		reg |= FIELD_PREP(CLK_CNTL1_M2_MASK, freq->m2 - 1);
+
+	regmap_write(cec_32k->regmap, AO_RTC_ALT_CLK_CNTL1, reg);
+
+	/* Enable clock */
+	regmap_update_bits(cec_32k->regmap, AO_RTC_ALT_CLK_CNTL0,
+			   CLK_CNTL0_IN_GATE_EN, CLK_CNTL0_IN_GATE_EN);
+
+	udelay(200);
+
+	regmap_update_bits(cec_32k->regmap, AO_RTC_ALT_CLK_CNTL0,
+			   CLK_CNTL0_OUT_GATE_EN, CLK_CNTL0_OUT_GATE_EN);
+
+	regmap_update_bits(cec_32k->regmap, AO_CRT_CLK_CNTL1,
+			   CLK_CNTL1_SELECT_OSC, CLK_CNTL1_SELECT_OSC);
+
+	/* Select 32k from XTAL */
+	regmap_update_bits(cec_32k->regmap,
+			  AO_RTI_PWR_CNTL_REG0,
+			  PWR_CNTL_ALT_32K_SEL,
+			  FIELD_PREP(PWR_CNTL_ALT_32K_SEL, 4));
+
+	return 0;
+}
+
+const struct clk_ops meson_aoclk_cec_32k_ops = {
+	.recalc_rate = aoclk_cec_32k_recalc_rate,
+	.round_rate = aoclk_cec_32k_round_rate,
+	.set_rate = aoclk_cec_32k_set_rate,
+};
diff --git a/drivers/clk/meson/gxbb-aoclk.c b/drivers/clk/meson/gxbb-aoclk.c
index f61506c53089..6c161e0a8e59 100644
--- a/drivers/clk/meson/gxbb-aoclk.c
+++ b/drivers/clk/meson/gxbb-aoclk.c
@@ -59,6 +59,7 @@
 #include <linux/mfd/syscon.h>
 #include <linux/regmap.h>
 #include <linux/init.h>
+#include <linux/delay.h>
 #include <dt-bindings/clock/gxbb-aoclkc.h>
 #include <dt-bindings/reset/gxbb-aoclkc.h>
 #include "gxbb-aoclk.h"
@@ -105,6 +106,17 @@ GXBB_AO_GATE(uart1, 3);
 GXBB_AO_GATE(uart2, 5);
 GXBB_AO_GATE(ir_blaster, 6);
 
+static struct aoclk_cec_32k cec_32k_ao = {
+	.lock = &gxbb_aoclk_lock,
+	.hw.init = &(struct clk_init_data) {
+		.name = "cec_32k_ao",
+		.ops = &meson_aoclk_cec_32k_ops,
+		.parent_names = (const char *[]){ "xtal" },
+		.num_parents = 1,
+		.flags = CLK_IGNORE_UNUSED,
+	},
+};
+
 static unsigned int gxbb_aoclk_reset[] = {
 	[RESET_AO_REMOTE] = 16,
 	[RESET_AO_I2C_MASTER] = 18,
@@ -131,8 +143,9 @@ static struct clk_hw_onecell_data gxbb_aoclk_onecell_data = {
 		[CLKID_AO_UART1] = &uart1_ao.hw,
 		[CLKID_AO_UART2] = &uart2_ao.hw,
 		[CLKID_AO_IR_BLASTER] = &ir_blaster_ao.hw,
+		[CLKID_AO_CEC_32K] = &cec_32k_ao.hw,
 	},
-	.num = ARRAY_SIZE(gxbb_aoclk_gate),
+	.num = 7,
 };
 
 static int gxbb_aoclkc_probe(struct platform_device *pdev)
@@ -172,6 +185,12 @@ static int gxbb_aoclkc_probe(struct platform_device *pdev)
 			return ret;
 	}
 
+	/* Specific clocks */
+	cec_32k_ao.regmap = regmap;
+	ret = devm_clk_hw_register(dev, &cec_32k_ao.hw);
+	if (ret)
+		return ret;
+
 	return of_clk_add_hw_provider(dev->of_node, of_clk_hw_onecell_get,
 			&gxbb_aoclk_onecell_data);
 }
diff --git a/drivers/clk/meson/gxbb-aoclk.h b/drivers/clk/meson/gxbb-aoclk.h
index 2e26108d5ba6..e8604c8f7eee 100644
--- a/drivers/clk/meson/gxbb-aoclk.h
+++ b/drivers/clk/meson/gxbb-aoclk.h
@@ -9,7 +9,13 @@
 #define __GXBB_AOCLKC_H
 
 /* AO Configuration Clock registers offsets */
+#define AO_RTI_PWR_CNTL_REG1	0x0c
+#define AO_RTI_PWR_CNTL_REG0	0x10
 #define AO_RTI_GEN_CNTL_REG0	0x40
+#define AO_OSCIN_CNTL		0x58
+#define AO_CRT_CLK_CNTL1	0x68
+#define AO_RTC_ALT_CLK_CNTL0	0x94
+#define AO_RTC_ALT_CLK_CNTL1	0x98
 
 struct aoclk_gate_regmap {
 	struct clk_hw hw;
@@ -23,4 +29,14 @@ struct aoclk_gate_regmap {
 
 extern const struct clk_ops meson_aoclk_gate_regmap_ops;
 
+struct aoclk_cec_32k {
+	struct clk_hw hw;
+	struct regmap *regmap;
+	spinlock_t *lock;
+};
+
+#define to_aoclk_cec_32k(_hw) container_of(_hw, struct aoclk_cec_32k, hw)
+
+extern const struct clk_ops meson_aoclk_cec_32k_ops;
+
 #endif /* __GXBB_AOCLKC_H */
-- 
cgit v1.2.3


From d00b4d943d8c2372a01533b1af3d49c126a5a415 Mon Sep 17 00:00:00 2001
From: Elaine Zhang <zhangqing@rock-chips.com>
Date: Wed, 2 Aug 2017 16:32:23 +0800
Subject: clk: rockchip: support more rates for rv1108 cpuclk

fix up the cpuclk rates table for support more freqs.
fix up the mux_core_mask describe error.

Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
---
 drivers/clk/rockchip/clk-rv1108.c | 23 +++++++++++++++++++----
 1 file changed, 19 insertions(+), 4 deletions(-)

diff --git a/drivers/clk/rockchip/clk-rv1108.c b/drivers/clk/rockchip/clk-rv1108.c
index 7c05ab366348..3c670db16e18 100644
--- a/drivers/clk/rockchip/clk-rv1108.c
+++ b/drivers/clk/rockchip/clk-rv1108.c
@@ -93,9 +93,24 @@ static struct rockchip_pll_rate_table rv1108_pll_rates[] = {
 	}
 
 static struct rockchip_cpuclk_rate_table rv1108_cpuclk_rates[] __initdata = {
-	RV1108_CPUCLK_RATE(816000000, 4),
-	RV1108_CPUCLK_RATE(600000000, 4),
-	RV1108_CPUCLK_RATE(312000000, 4),
+	RV1108_CPUCLK_RATE(1608000000, 7),
+	RV1108_CPUCLK_RATE(1512000000, 7),
+	RV1108_CPUCLK_RATE(1488000000, 5),
+	RV1108_CPUCLK_RATE(1416000000, 5),
+	RV1108_CPUCLK_RATE(1392000000, 5),
+	RV1108_CPUCLK_RATE(1296000000, 5),
+	RV1108_CPUCLK_RATE(1200000000, 5),
+	RV1108_CPUCLK_RATE(1104000000, 5),
+	RV1108_CPUCLK_RATE(1008000000, 5),
+	RV1108_CPUCLK_RATE(912000000, 5),
+	RV1108_CPUCLK_RATE(816000000, 3),
+	RV1108_CPUCLK_RATE(696000000, 3),
+	RV1108_CPUCLK_RATE(600000000, 3),
+	RV1108_CPUCLK_RATE(500000000, 3),
+	RV1108_CPUCLK_RATE(408000000, 1),
+	RV1108_CPUCLK_RATE(312000000, 1),
+	RV1108_CPUCLK_RATE(216000000, 1),
+	RV1108_CPUCLK_RATE(96000000, 1),
 };
 
 static const struct rockchip_cpuclk_reg_data rv1108_cpuclk_data = {
@@ -105,7 +120,7 @@ static const struct rockchip_cpuclk_reg_data rv1108_cpuclk_data = {
 	.mux_core_alt = 1,
 	.mux_core_main = 0,
 	.mux_core_shift = 8,
-	.mux_core_mask = 0x1,
+	.mux_core_mask = 0x3,
 };
 
 PNAME(mux_pll_p)		= { "xin24m", "xin24m"};
-- 
cgit v1.2.3


From eca05f0011de16f7a889e14dc36c7618d040884a Mon Sep 17 00:00:00 2001
From: Elaine Zhang <zhangqing@rock-chips.com>
Date: Wed, 2 Aug 2017 16:33:04 +0800
Subject: clk: rockchip: fix up the pll clks error for rv1108 SoC

fix up the lock_shift describe error.
remove the ROCKCHIP_PLL_SYNC_RATE flag for gpll.

Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
---
 drivers/clk/rockchip/clk-rv1108.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/clk/rockchip/clk-rv1108.c b/drivers/clk/rockchip/clk-rv1108.c
index 3c670db16e18..9c6bad0da140 100644
--- a/drivers/clk/rockchip/clk-rv1108.c
+++ b/drivers/clk/rockchip/clk-rv1108.c
@@ -148,11 +148,11 @@ PNAME(mux_i2s2_p)		= { "i2s2_src", "i2s2_frac", "xin12m" };
 
 static struct rockchip_pll_clock rv1108_pll_clks[] __initdata = {
 	[apll] = PLL(pll_rk3399, PLL_APLL, "apll", mux_pll_p, 0, RV1108_PLL_CON(0),
-		     RV1108_PLL_CON(3), 8, 31, 0, rv1108_pll_rates),
+		     RV1108_PLL_CON(3), 8, 0, 0, rv1108_pll_rates),
 	[dpll] = PLL(pll_rk3399, PLL_DPLL, "dpll", mux_pll_p, 0, RV1108_PLL_CON(8),
-		     RV1108_PLL_CON(11), 8, 31, 0, NULL),
+		     RV1108_PLL_CON(11), 8, 1, 0, NULL),
 	[gpll] = PLL(pll_rk3399, PLL_GPLL, "gpll", mux_pll_p, 0, RV1108_PLL_CON(16),
-		     RV1108_PLL_CON(19), 8, 31, ROCKCHIP_PLL_SYNC_RATE, rv1108_pll_rates),
+		     RV1108_PLL_CON(19), 8, 2, 0, rv1108_pll_rates),
 };
 
 #define MFLAGS CLK_MUX_HIWORD_MASK
-- 
cgit v1.2.3


From 2566337bfcb10de947ba368491ca72db91fada32 Mon Sep 17 00:00:00 2001
From: Elaine Zhang <zhangqing@rock-chips.com>
Date: Tue, 8 Aug 2017 15:18:43 +0800
Subject: clk: rockchip: support more clks for rv1108

Add the description of the missing clock,
make the clock more complete.

Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
---
 drivers/clk/rockchip/clk-rv1108.c | 278 +++++++++++++++++++++++++++++++++++++-
 1 file changed, 276 insertions(+), 2 deletions(-)

diff --git a/drivers/clk/rockchip/clk-rv1108.c b/drivers/clk/rockchip/clk-rv1108.c
index 9c6bad0da140..2ebc7da1a996 100644
--- a/drivers/clk/rockchip/clk-rv1108.c
+++ b/drivers/clk/rockchip/clk-rv1108.c
@@ -145,6 +145,18 @@ PNAME(mux_i2s0_pre_p)		= { "i2s0_src", "i2s0_frac", "ext_i2s", "xin12m" };
 PNAME(mux_i2s_out_p)		= { "i2s0_pre", "xin12m" };
 PNAME(mux_i2s1_p)		= { "i2s1_src", "i2s1_frac", "xin12m" };
 PNAME(mux_i2s2_p)		= { "i2s2_src", "i2s2_frac", "xin12m" };
+PNAME(mux_wifi_src_p)		= { "gpll", "xin24m" };
+PNAME(mux_cifout_src_p)	= { "hdmiphy", "gpll" };
+PNAME(mux_cifout_p)		= { "sclk_cifout_src", "xin24m" };
+PNAME(mux_sclk_cif0_src_p)	= { "pclk_vip", "clk_cif0_chn_out", "pclkin_cvbs2cif" };
+PNAME(mux_sclk_cif1_src_p)	= { "pclk_vip", "clk_cif1_chn_out", "pclkin_cvbs2cif" };
+PNAME(mux_sclk_cif2_src_p)	= { "pclk_vip", "clk_cif2_chn_out", "pclkin_cvbs2cif" };
+PNAME(mux_sclk_cif3_src_p)	= { "pclk_vip", "clk_cif3_chn_out", "pclkin_cvbs2cif" };
+PNAME(mux_dsp_src_p)		= { "dpll", "gpll", "apll", "usb480m" };
+PNAME(mux_dclk_hdmiphy_p)	= { "hdmiphy", "xin24m" };
+PNAME(mux_dclk_vop_p)		= { "dclk_hdmiphy", "dclk_vop_src" };
+PNAME(mux_hdmi_cec_src_p)		= { "dpll", "gpll", "xin24m" };
+PNAME(mux_cvbs_src_p)		= { "apll", "io_cvbs_clkin", "hdmiphy", "gpll" };
 
 static struct rockchip_pll_clock rv1108_pll_clks[] __initdata = {
 	[apll] = PLL(pll_rk3399, PLL_APLL, "apll", mux_pll_p, 0, RV1108_PLL_CON(0),
@@ -212,8 +224,53 @@ static struct rockchip_clk_branch rv1108_clk_branches[] __initdata = {
 			RV1108_CLKGATE_CON(11), 1, GFLAGS),
 
 	/* PD_RKVENC */
+	COMPOSITE(0, "aclk_rkvenc_pre", mux_pll_src_4plls_p, 0,
+			RV1108_CLKSEL_CON(37), 6, 2, MFLAGS, 0, 5, DFLAGS,
+			RV1108_CLKGATE_CON(8), 8, GFLAGS),
+	FACTOR_GATE(0, "hclk_rkvenc_pre", "aclk_rkvenc_pre", 0, 1, 4,
+			RV1108_CLKGATE_CON(8), 10, GFLAGS),
+	COMPOSITE(SCLK_VENC_CORE, "clk_venc_core", mux_pll_src_4plls_p, 0,
+			RV1108_CLKSEL_CON(37), 14, 2, MFLAGS, 8, 5, DFLAGS,
+			RV1108_CLKGATE_CON(8), 9, GFLAGS),
+	GATE(ACLK_RKVENC, "aclk_rkvenc", "aclk_rkvenc_pre", 0,
+			RV1108_CLKGATE_CON(19), 8, GFLAGS),
+	GATE(HCLK_RKVENC, "hclk_rkvenc", "hclk_rkvenc_pre", 0,
+			RV1108_CLKGATE_CON(19), 9, GFLAGS),
+	GATE(0, "aclk_rkvenc_niu", "aclk_rkvenc_pre", CLK_IGNORE_UNUSED,
+			RV1108_CLKGATE_CON(19), 11, GFLAGS),
+	GATE(0, "hclk_rkvenc_niu", "hclk_rkvenc_pre", CLK_IGNORE_UNUSED,
+			RV1108_CLKGATE_CON(19), 10, GFLAGS),
 
 	/* PD_RKVDEC */
+	COMPOSITE(SCLK_HEVC_CORE, "sclk_hevc_core", mux_pll_src_4plls_p, 0,
+			RV1108_CLKSEL_CON(36), 6, 2, MFLAGS, 0, 5, DFLAGS,
+			RV1108_CLKGATE_CON(8), 2, GFLAGS),
+	FACTOR_GATE(0, "hclk_rkvdec_pre", "sclk_hevc_core", 0, 1, 4,
+			RV1108_CLKGATE_CON(8), 10, GFLAGS),
+	COMPOSITE(SCLK_HEVC_CABAC, "clk_hevc_cabac", mux_pll_src_4plls_p, 0,
+			RV1108_CLKSEL_CON(35), 14, 2, MFLAGS, 8, 5, DFLAGS,
+			RV1108_CLKGATE_CON(8), 1, GFLAGS),
+
+	COMPOSITE(0, "aclk_rkvdec_pre", mux_pll_src_4plls_p, 0,
+			RV1108_CLKSEL_CON(35), 6, 2, MFLAGS, 0, 5, DFLAGS,
+			RV1108_CLKGATE_CON(8), 0, GFLAGS),
+	COMPOSITE(0, "aclk_vpu_pre", mux_pll_src_4plls_p, 0,
+			RV1108_CLKSEL_CON(36), 14, 2, MFLAGS, 8, 5, DFLAGS,
+			RV1108_CLKGATE_CON(8), 3, GFLAGS),
+	GATE(ACLK_RKVDEC, "aclk_rkvdec", "aclk_rkvdec_pre", 0,
+			RV1108_CLKGATE_CON(19), 0, GFLAGS),
+	GATE(ACLK_VPU, "aclk_vpu", "aclk_vpu_pre", 0,
+			RV1108_CLKGATE_CON(19), 1, GFLAGS),
+	GATE(HCLK_RKVDEC, "hclk_rkvdec", "hclk_rkvdec_pre", 0,
+			RV1108_CLKGATE_CON(19), 2, GFLAGS),
+	GATE(HCLK_VPU, "hclk_vpu", "hclk_rkvdec_pre", 0,
+			RV1108_CLKGATE_CON(19), 3, GFLAGS),
+	GATE(0, "aclk_rkvdec_niu", "aclk_rkvdec_pre", CLK_IGNORE_UNUSED,
+			RV1108_CLKGATE_CON(19), 4, GFLAGS),
+	GATE(0, "hclk_rkvdec_niu", "hclk_rkvdec_pre", CLK_IGNORE_UNUSED,
+			RV1108_CLKGATE_CON(19), 5, GFLAGS),
+	GATE(0, "aclk_vpu_niu", "aclk_vpu_pre", CLK_IGNORE_UNUSED,
+			RV1108_CLKGATE_CON(19), 6, GFLAGS),
 
 	/* PD_PMU_wrapper */
 	COMPOSITE_NOMUX(0, "pmu_24m_ena", "gpll", CLK_IGNORE_UNUSED,
@@ -242,6 +299,114 @@ static struct rockchip_clk_branch rv1108_clk_branches[] __initdata = {
 	GATE(0, "pvtm_pmu", "xin24m", CLK_IGNORE_UNUSED,
 			RV1108_CLKGATE_CON(8), 13, GFLAGS),
 
+	/*
+	 * Clock-Architecture Diagram 3
+	 */
+	COMPOSITE(SCLK_WIFI, "sclk_wifi", mux_wifi_src_p, 0,
+			RV1108_CLKSEL_CON(28), 15, 1, MFLAGS, 8, 6, DFLAGS,
+			RV1108_CLKGATE_CON(9), 8, GFLAGS),
+	COMPOSITE_NODIV(0, "sclk_cifout_src", mux_cifout_src_p, 0,
+			RV1108_CLKSEL_CON(40), 8, 1, MFLAGS,
+			RV1108_CLKGATE_CON(9), 11, GFLAGS),
+	COMPOSITE_NOGATE(SCLK_CIFOUT, "sclk_cifout", mux_cifout_p, 0,
+			RV1108_CLKSEL_CON(40), 12, 1, MFLAGS, 0, 5, DFLAGS),
+	COMPOSITE_NOMUX(SCLK_MIPI_CSI_OUT, "sclk_mipi_csi_out", "xin24m", 0,
+			RV1108_CLKSEL_CON(41), 0, 5, DFLAGS,
+			RV1108_CLKGATE_CON(9), 12, GFLAGS),
+
+	GATE(0, "pclk_acodecphy", "pclk_top_pre", CLK_IGNORE_UNUSED,
+			RV1108_CLKGATE_CON(14), 6, GFLAGS),
+	GATE(0, "pclk_usbgrf", "pclk_top_pre", CLK_IGNORE_UNUSED,
+			RV1108_CLKGATE_CON(14), 14, GFLAGS),
+
+	GATE(ACLK_CIF0, "aclk_cif0", "aclk_vio1_pre", 0,
+			RV1108_CLKGATE_CON(18), 10, GFLAGS),
+	GATE(HCLK_CIF0, "hclk_cif0", "hclk_vio_pre", 0,
+			RV1108_CLKGATE_CON(18), 10, GFLAGS),
+	COMPOSITE_NODIV(SCLK_CIF0, "sclk_cif0", mux_sclk_cif0_src_p, 0,
+			RV1108_CLKSEL_CON(31), 0, 2, MFLAGS,
+			RV1108_CLKGATE_CON(7), 9, GFLAGS),
+	GATE(ACLK_CIF1, "aclk_cif1", "aclk_vio1_pre", 0,
+			RV1108_CLKGATE_CON(17), 6, GFLAGS),
+	GATE(HCLK_CIF1, "hclk_cif1", "hclk_vio_pre", 0,
+			RV1108_CLKGATE_CON(17), 7, GFLAGS),
+	COMPOSITE_NODIV(SCLK_CIF1, "sclk_cif1", mux_sclk_cif1_src_p, 0,
+			RV1108_CLKSEL_CON(31), 2, 2, MFLAGS,
+			RV1108_CLKGATE_CON(7), 10, GFLAGS),
+	GATE(ACLK_CIF2, "aclk_cif2", "aclk_vio1_pre", 0,
+			RV1108_CLKGATE_CON(17), 8, GFLAGS),
+	GATE(HCLK_CIF2, "hclk_cif2", "hclk_vio_pre", 0,
+			RV1108_CLKGATE_CON(17), 9, GFLAGS),
+	COMPOSITE_NODIV(SCLK_CIF2, "sclk_cif2", mux_sclk_cif2_src_p, 0,
+			RV1108_CLKSEL_CON(31), 4, 2, MFLAGS,
+			RV1108_CLKGATE_CON(7), 11, GFLAGS),
+	GATE(ACLK_CIF3, "aclk_cif3", "aclk_vio1_pre", 0,
+			RV1108_CLKGATE_CON(17), 10, GFLAGS),
+	GATE(HCLK_CIF3, "hclk_cif3", "hclk_vio_pre", 0,
+			RV1108_CLKGATE_CON(17), 11, GFLAGS),
+	COMPOSITE_NODIV(SCLK_CIF3, "sclk_cif3", mux_sclk_cif3_src_p, 0,
+			RV1108_CLKSEL_CON(31), 6, 2, MFLAGS,
+			RV1108_CLKGATE_CON(7), 12, GFLAGS),
+	GATE(0, "pclk_cif1to4", "pclk_vip", CLK_IGNORE_UNUSED,
+			RV1108_CLKGATE_CON(7), 8, GFLAGS),
+
+	/* PD_DSP_wrapper */
+	COMPOSITE(SCLK_DSP, "sclk_dsp", mux_dsp_src_p, 0,
+			RV1108_CLKSEL_CON(42), 8, 2, MFLAGS, 0, 5, DFLAGS,
+			RV1108_CLKGATE_CON(9), 0, GFLAGS),
+	GATE(0, "clk_dsp_sys_wd", "sclk_dsp", CLK_IGNORE_UNUSED,
+			RV1108_CLKGATE_CON(16), 0, GFLAGS),
+	GATE(0, "clk_dsp_epp_wd", "sclk_dsp", CLK_IGNORE_UNUSED,
+			RV1108_CLKGATE_CON(16), 1, GFLAGS),
+	GATE(0, "clk_dsp_edp_wd", "sclk_dsp", CLK_IGNORE_UNUSED,
+			RV1108_CLKGATE_CON(16), 2, GFLAGS),
+	GATE(0, "clk_dsp_iop_wd", "sclk_dsp", CLK_IGNORE_UNUSED,
+			RV1108_CLKGATE_CON(16), 3, GFLAGS),
+	GATE(0, "clk_dsp_free", "sclk_dsp", CLK_IGNORE_UNUSED,
+			RV1108_CLKGATE_CON(16), 13, GFLAGS),
+	COMPOSITE_NOMUX(SCLK_DSP_IOP, "sclk_dsp_iop", "sclk_dsp", 0,
+			RV1108_CLKSEL_CON(44), 0, 5, DFLAGS,
+			RV1108_CLKGATE_CON(9), 1, GFLAGS),
+	COMPOSITE_NOMUX(SCLK_DSP_EPP, "sclk_dsp_epp", "sclk_dsp", 0,
+			RV1108_CLKSEL_CON(44), 8, 5, DFLAGS,
+			RV1108_CLKGATE_CON(9), 2, GFLAGS),
+	COMPOSITE_NOMUX(SCLK_DSP_EDP, "sclk_dsp_edp", "sclk_dsp", 0,
+			RV1108_CLKSEL_CON(45), 0, 5, DFLAGS,
+			RV1108_CLKGATE_CON(9), 3, GFLAGS),
+	COMPOSITE_NOMUX(SCLK_DSP_EDAP, "sclk_dsp_edap", "sclk_dsp", 0,
+			RV1108_CLKSEL_CON(45), 8, 5, DFLAGS,
+			RV1108_CLKGATE_CON(9), 4, GFLAGS),
+	GATE(0, "pclk_dsp_iop_niu", "sclk_dsp_iop", CLK_IGNORE_UNUSED,
+			RV1108_CLKGATE_CON(16), 4, GFLAGS),
+	GATE(0, "aclk_dsp_epp_niu", "sclk_dsp_epp", CLK_IGNORE_UNUSED,
+			RV1108_CLKGATE_CON(16), 5, GFLAGS),
+	GATE(0, "aclk_dsp_edp_niu", "sclk_dsp_edp", CLK_IGNORE_UNUSED,
+			RV1108_CLKGATE_CON(16), 6, GFLAGS),
+	GATE(0, "pclk_dsp_dbg_niu", "sclk_dsp", CLK_IGNORE_UNUSED,
+			RV1108_CLKGATE_CON(16), 7, GFLAGS),
+	GATE(0, "aclk_dsp_edap_niu", "sclk_dsp_edap", CLK_IGNORE_UNUSED,
+			RV1108_CLKGATE_CON(16), 14, GFLAGS),
+	COMPOSITE_NOMUX(SCLK_DSP_PFM, "sclk_dsp_pfm", "sclk_dsp", 0,
+			RV1108_CLKSEL_CON(43), 0, 5, DFLAGS,
+			RV1108_CLKGATE_CON(9), 5, GFLAGS),
+	COMPOSITE_NOMUX(PCLK_DSP_CFG, "pclk_dsp_cfg", "sclk_dsp", 0,
+			RV1108_CLKSEL_CON(43), 8, 5, DFLAGS,
+			RV1108_CLKGATE_CON(9), 6, GFLAGS),
+	GATE(0, "pclk_dsp_cfg_niu", "pclk_dsp_cfg", CLK_IGNORE_UNUSED,
+			RV1108_CLKGATE_CON(16), 8, GFLAGS),
+	GATE(0, "pclk_dsp_pfm_mon", "pclk_dsp_cfg", CLK_IGNORE_UNUSED,
+			RV1108_CLKGATE_CON(16), 9, GFLAGS),
+	GATE(0, "pclk_intc", "pclk_dsp_cfg", CLK_IGNORE_UNUSED,
+			RV1108_CLKGATE_CON(16), 10, GFLAGS),
+	GATE(0, "pclk_dsp_grf", "pclk_dsp_cfg", CLK_IGNORE_UNUSED,
+			RV1108_CLKGATE_CON(16), 11, GFLAGS),
+	GATE(0, "pclk_mailbox", "pclk_dsp_cfg", CLK_IGNORE_UNUSED,
+			RV1108_CLKGATE_CON(16), 12, GFLAGS),
+	GATE(0, "aclk_dsp_epp_perf", "sclk_dsp_epp", CLK_IGNORE_UNUSED,
+			RV1108_CLKGATE_CON(16), 15, GFLAGS),
+	GATE(0, "aclk_dsp_edp_perf", "sclk_dsp_edp", CLK_IGNORE_UNUSED,
+			RV1108_CLKGATE_CON(11), 8, GFLAGS),
+
 	/*
 	 * Clock-Architecture Diagram 4
 	 */
@@ -253,9 +418,18 @@ static struct rockchip_clk_branch rv1108_clk_branches[] __initdata = {
 	COMPOSITE_NOMUX(0, "hclk_vio_pre", "aclk_vio0_pre", 0,
 			RV1108_CLKSEL_CON(29), 0, 5, DFLAGS,
 			RV1108_CLKGATE_CON(7), 2, GFLAGS),
+	GATE(HCLK_VIO, "hclk_vio", "hclk_vio_pre", 0,
+			RV1108_CLKGATE_CON(17), 2, GFLAGS),
 	COMPOSITE_NOMUX(0, "pclk_vio_pre", "aclk_vio0_pre", 0,
 			RV1108_CLKSEL_CON(29), 8, 5, DFLAGS,
 			RV1108_CLKGATE_CON(7), 3, GFLAGS),
+	GATE(PCLK_VIO, "pclk_vio", "pclk_vio_pre", 0,
+			RV1108_CLKGATE_CON(17), 3, GFLAGS),
+	COMPOSITE(0, "aclk_vio1_pre", mux_pll_src_4plls_p, CLK_IGNORE_UNUSED,
+			RV1108_CLKSEL_CON(28), 14, 2, MFLAGS, 8, 5, DFLAGS,
+			RV1108_CLKGATE_CON(6), 1, GFLAGS),
+	GATE(ACLK_VIO1, "aclk_vio1", "aclk_vio1_pre", 0,
+			RV1108_CLKGATE_CON(17), 1, GFLAGS),
 
 	INVERTER(0, "pclk_vip", "ext_vip",
 			RV1108_CLKSEL_CON(31), 8, IFLAGS),
@@ -267,8 +441,63 @@ static struct rockchip_clk_branch rv1108_clk_branches[] __initdata = {
 			RV1108_CLKGATE_CON(6), 5, GFLAGS),
 	GATE(0, "dclk_hdmiphy_src_dpll", "dpll", CLK_IGNORE_UNUSED,
 			RV1108_CLKGATE_CON(6), 4, GFLAGS),
-	COMPOSITE_NOGATE(0, "dclk_hdmiphy", mux_dclk_hdmiphy_pre_p, 0,
+	COMPOSITE_NOGATE(0, "dclk_hdmiphy_pre", mux_dclk_hdmiphy_pre_p, 0,
 			RV1108_CLKSEL_CON(32), 6, 2, MFLAGS, 8, 6, DFLAGS),
+	COMPOSITE_NOGATE(DCLK_VOP_SRC, "dclk_vop_src", mux_dclk_hdmiphy_pre_p, 0,
+			RV1108_CLKSEL_CON(32), 6, 1, MFLAGS, 0, 6, DFLAGS),
+	MUX(DCLK_HDMIPHY, "dclk_hdmiphy", mux_dclk_hdmiphy_p, CLK_SET_RATE_PARENT,
+			RV1108_CLKSEL_CON(32), 15, 1, MFLAGS),
+	MUX(DCLK_VOP, "dclk_vop", mux_dclk_vop_p, CLK_SET_RATE_PARENT,
+			RV1108_CLKSEL_CON(32), 7, 1, MFLAGS),
+	GATE(ACLK_VOP, "aclk_vop", "aclk_vio0_pre", 0,
+			RV1108_CLKGATE_CON(18), 0, GFLAGS),
+	GATE(HCLK_VOP, "hclk_vop", "hclk_vio_pre", 0,
+			RV1108_CLKGATE_CON(18), 1, GFLAGS),
+	GATE(ACLK_IEP, "aclk_iep", "aclk_vio0_pre", 0,
+			RV1108_CLKGATE_CON(18), 2, GFLAGS),
+	GATE(HCLK_IEP, "hclk_iep", "hclk_vio_pre", 0,
+			RV1108_CLKGATE_CON(18), 3, GFLAGS),
+
+	GATE(ACLK_RGA, "aclk_rga", "aclk_vio1_pre", 0,
+			RV1108_CLKGATE_CON(18), 4, GFLAGS),
+	GATE(HCLK_RGA, "hclk_rga", "hclk_vio_pre", 0,
+			RV1108_CLKGATE_CON(18), 5, GFLAGS),
+	COMPOSITE(SCLK_RGA, "sclk_rga", mux_pll_src_4plls_p, 0,
+			RV1108_CLKSEL_CON(33), 6, 2, MFLAGS, 0, 5, DFLAGS,
+			RV1108_CLKGATE_CON(6), 6, GFLAGS),
+
+	COMPOSITE(SCLK_CVBS_HOST, "sclk_cvbs_host", mux_cvbs_src_p, 0,
+			RV1108_CLKSEL_CON(33), 13, 2, MFLAGS, 8, 5, DFLAGS,
+			RV1108_CLKGATE_CON(6), 7, GFLAGS),
+	FACTOR(0, "sclk_cvbs_27m", "sclk_cvbs_host", 0, 1, 2),
+
+	GATE(SCLK_HDMI_SFR, "sclk_hdmi_sfr", "xin24m", 0,
+			RV1108_CLKGATE_CON(6), 8, GFLAGS),
+
+	COMPOSITE(SCLK_HDMI_CEC, "sclk_hdmi_cec", mux_hdmi_cec_src_p, 0,
+			RV1108_CLKSEL_CON(34), 14, 2, MFLAGS, 0, 14, DFLAGS,
+			RV1108_CLKGATE_CON(6), 9, GFLAGS),
+	GATE(PCLK_MIPI_DSI, "pclk_mipi_dsi", "pclk_vio_pre", 0,
+			RV1108_CLKGATE_CON(18), 8, GFLAGS),
+	GATE(PCLK_HDMI_CTRL, "pclk_hdmi_ctrl", "pclk_vio_pre", 0,
+			RV1108_CLKGATE_CON(18), 9, GFLAGS),
+
+	GATE(ACLK_ISP, "aclk_isp", "aclk_vio1_pre", 0,
+			RV1108_CLKGATE_CON(18), 12, GFLAGS),
+	GATE(HCLK_ISP, "hclk_isp", "hclk_vio_pre", 0,
+			RV1108_CLKGATE_CON(18), 11, GFLAGS),
+	COMPOSITE(SCLK_ISP, "sclk_isp", mux_pll_src_4plls_p, 0,
+			RV1108_CLKSEL_CON(30), 14, 2, MFLAGS, 8, 5, DFLAGS,
+			RV1108_CLKGATE_CON(6), 3, GFLAGS),
+
+	GATE(0, "clk_dsiphy24m", "xin24m", CLK_IGNORE_UNUSED,
+			RV1108_CLKGATE_CON(9), 10, GFLAGS),
+	GATE(0, "pclk_vdacphy", "pclk_top_pre", CLK_IGNORE_UNUSED,
+			RV1108_CLKGATE_CON(14), 9, GFLAGS),
+	GATE(0, "pclk_mipi_dsiphy", "pclk_top_pre", CLK_IGNORE_UNUSED,
+			RV1108_CLKGATE_CON(14), 11, GFLAGS),
+	GATE(0, "pclk_mipi_csiphy", "pclk_top_pre", CLK_IGNORE_UNUSED,
+			RV1108_CLKGATE_CON(14), 12, GFLAGS),
 
 	/*
 	 * Clock-Architecture Diagram 5
@@ -276,7 +505,8 @@ static struct rockchip_clk_branch rv1108_clk_branches[] __initdata = {
 
 	FACTOR(0, "xin12m", "xin24m", 0, 1, 2),
 
-	COMPOSITE(0, "i2s0_src", mux_pll_src_2plls_p, 0,
+
+	COMPOSITE(SCLK_I2S0_SRC, "i2s0_src", mux_pll_src_2plls_p, 0,
 			RV1108_CLKSEL_CON(5), 8, 1, MFLAGS, 0, 7, DFLAGS,
 			RV1108_CLKGATE_CON(2), 0, GFLAGS),
 	COMPOSITE_FRACMUX(0, "i2s1_frac", "i2s1_src", CLK_SET_RATE_PARENT,
@@ -337,6 +567,27 @@ static struct rockchip_clk_branch rv1108_clk_branches[] __initdata = {
 	GATE(0, "pclk_timer", "pclk_bus_pre", CLK_IGNORE_UNUSED,
 			RV1108_CLKGATE_CON(13), 4, GFLAGS),
 
+	GATE(HCLK_I2S0_8CH, "hclk_i2s0_8ch", "hclk_bus_pre", 0,
+			RV1108_CLKGATE_CON(12), 7, GFLAGS),
+	GATE(HCLK_I2S1_2CH, "hclk_i2s1_2ch", "hclk_bus_pre", 0,
+			RV1108_CLKGATE_CON(12), 8, GFLAGS),
+	GATE(HCLK_I2S2_2CH, "hclk_i2s2_2ch", "hclk_bus_pre", 0,
+			RV1108_CLKGATE_CON(12), 9, GFLAGS),
+
+	GATE(HCLK_CRYPTO_MST, "hclk_crypto_mst", "hclk_bus_pre", 0,
+			RV1108_CLKGATE_CON(12), 10, GFLAGS),
+	GATE(HCLK_CRYPTO_SLV, "hclk_crypto_slv", "hclk_bus_pre", 0,
+			RV1108_CLKGATE_CON(12), 11, GFLAGS),
+	COMPOSITE(SCLK_CRYPTO, "sclk_crypto", mux_pll_src_2plls_p, 0,
+			RV1108_CLKSEL_CON(11), 7, 1, MFLAGS, 0, 5, DFLAGS,
+			RV1108_CLKGATE_CON(2), 12, GFLAGS),
+
+	COMPOSITE(SCLK_SPI, "sclk_spi", mux_pll_src_2plls_p, 0,
+			RV1108_CLKSEL_CON(11), 15, 1, MFLAGS, 8, 5, DFLAGS,
+			RV1108_CLKGATE_CON(3), 0, GFLAGS),
+	GATE(PCLK_SPI, "pclk_spi", "pclk_bus_pre", 0,
+			RV1108_CLKGATE_CON(13), 5, GFLAGS),
+
 	COMPOSITE(0, "uart0_src", mux_pll_src_dpll_gpll_usb480m_p, CLK_IGNORE_UNUSED,
 			RV1108_CLKSEL_CON(13), 12, 2, MFLAGS, 0, 7, DFLAGS,
 			RV1108_CLKGATE_CON(3), 1, GFLAGS),
@@ -397,6 +648,20 @@ static struct rockchip_clk_branch rv1108_clk_branches[] __initdata = {
 
 	GATE(0, "pclk_grf", "pclk_bus_pre", CLK_IGNORE_UNUSED,
 			RV1108_CLKGATE_CON(14), 0, GFLAGS),
+	GATE(PCLK_EFUSE0, "pclk_efuse0", "pclk_bus_pre", 0,
+			RV1108_CLKGATE_CON(12), 12, GFLAGS),
+	GATE(PCLK_EFUSE1, "pclk_efuse1", "pclk_bus_pre", 0,
+			RV1108_CLKGATE_CON(12), 13, GFLAGS),
+	GATE(PCLK_TSADC, "pclk_tsadc", "pclk_bus_pre", 0,
+			RV1108_CLKGATE_CON(13), 13, GFLAGS),
+	COMPOSITE_NOMUX(SCLK_TSADC, "sclk_tsadc", "xin24m", 0,
+			RV1108_CLKSEL_CON(21), 0, 10, DFLAGS,
+			RV1108_CLKGATE_CON(3), 11, GFLAGS),
+	GATE(PCLK_SARADC, "pclk_saradc", "pclk_bus_pre", 0,
+			RV1108_CLKGATE_CON(13), 14, GFLAGS),
+	COMPOSITE_NOMUX(SCLK_SARADC, "sclk_saradc", "xin24m", 0,
+			RV1108_CLKSEL_CON(22), 0, 10, DFLAGS,
+			RV1108_CLKGATE_CON(3), 12, GFLAGS),
 
 	GATE(ACLK_DMAC, "aclk_dmac", "aclk_bus_pre", 0,
 	     RV1108_CLKGATE_CON(12), 2, GFLAGS),
@@ -424,6 +689,10 @@ static struct rockchip_clk_branch rv1108_clk_branches[] __initdata = {
 			RV1108_CLKGATE_CON(12), 6, GFLAGS),
 	GATE(0, "timer_clk", "xin24m", CLK_IGNORE_UNUSED,
 			RV1108_CLKGATE_CON(0), 11, GFLAGS),
+	GATE(0, "pclk_mschniu", "pclk_ddr_pre", CLK_IGNORE_UNUSED,
+			RV1108_CLKGATE_CON(14), 2, GFLAGS),
+	GATE(0, "pclk_ddrphy", "pclk_ddr_pre", CLK_IGNORE_UNUSED,
+			RV1108_CLKGATE_CON(14), 4, GFLAGS),
 
 	/*
 	 * Clock-Architecture Diagram 6
@@ -473,6 +742,11 @@ static struct rockchip_clk_branch rv1108_clk_branches[] __initdata = {
 			RV1108_CLKGATE_CON(5), 3, GFLAGS),
 	GATE(HCLK_NANDC, "hclk_nandc", "hclk_periph", 0, RV1108_CLKGATE_CON(15), 3, GFLAGS),
 
+	GATE(HCLK_HOST0, "hclk_host0", "hclk_periph", 0, RV1108_CLKGATE_CON(15), 6, GFLAGS),
+	GATE(0, "hclk_host0_arb", "hclk_periph", CLK_IGNORE_UNUSED, RV1108_CLKGATE_CON(15), 7, GFLAGS),
+	GATE(HCLK_OTG, "hclk_otg", "hclk_periph", 0, RV1108_CLKGATE_CON(15), 8, GFLAGS),
+	GATE(0, "hclk_otg_pmu", "hclk_periph", CLK_IGNORE_UNUSED, RV1108_CLKGATE_CON(15), 9, GFLAGS),
+	GATE(SCLK_USBPHY, "clk_usbphy", "xin24m", CLK_IGNORE_UNUSED, RV1108_CLKGATE_CON(5), 5, GFLAGS),
 	COMPOSITE(SCLK_SFC, "sclk_sfc", mux_pll_src_2plls_p, 0,
 			RV1108_CLKSEL_CON(27), 7, 2, MFLAGS, 0, 7, DFLAGS,
 			RV1108_CLKGATE_CON(5), 4, GFLAGS),
-- 
cgit v1.2.3


From ac5a00a371866b0a2fc98d6f282b158e71c9b54b Mon Sep 17 00:00:00 2001
From: Elaine Zhang <zhangqing@rock-chips.com>
Date: Tue, 8 Aug 2017 15:18:59 +0800
Subject: clk: rockchip: fix up some clks describe error for rv1108 SoC

1. fix up the parent name
2. remove the CLK_IGNORE_UNUSED flag for some clk not need to always on.
3. fix up some clks regs describe error.

Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
---
 drivers/clk/rockchip/clk-rv1108.c | 121 +++++++++++++++++++-------------------
 1 file changed, 62 insertions(+), 59 deletions(-)

diff --git a/drivers/clk/rockchip/clk-rv1108.c b/drivers/clk/rockchip/clk-rv1108.c
index 2ebc7da1a996..620992ac212e 100644
--- a/drivers/clk/rockchip/clk-rv1108.c
+++ b/drivers/clk/rockchip/clk-rv1108.c
@@ -129,22 +129,22 @@ PNAME(mux_armclk_p)		= { "apll_core", "gpll_core", "dpll_core" };
 PNAME(mux_usb480m_pre_p)	= { "usbphy", "xin24m" };
 PNAME(mux_hdmiphy_phy_p)	= { "hdmiphy", "xin24m" };
 PNAME(mux_dclk_hdmiphy_pre_p)	= { "dclk_hdmiphy_src_gpll", "dclk_hdmiphy_src_dpll" };
-PNAME(mux_pll_src_4plls_p)	= { "dpll", "hdmiphy", "gpll", "usb480m" };
+PNAME(mux_pll_src_4plls_p)	= { "dpll", "gpll", "hdmiphy", "usb480m" };
 PNAME(mux_pll_src_3plls_p)	= { "apll", "gpll", "dpll" };
 PNAME(mux_pll_src_2plls_p)	= { "dpll", "gpll" };
 PNAME(mux_pll_src_apll_gpll_p)	= { "apll", "gpll" };
-PNAME(mux_aclk_peri_src_p)	= { "aclk_peri_src_dpll", "aclk_peri_src_gpll" };
+PNAME(mux_aclk_peri_src_p)	= { "aclk_peri_src_gpll", "aclk_peri_src_dpll" };
 PNAME(mux_aclk_bus_src_p)	= { "aclk_bus_src_gpll", "aclk_bus_src_apll", "aclk_bus_src_dpll" };
 PNAME(mux_mmc_src_p)		= { "dpll", "gpll", "xin24m", "usb480m" };
 PNAME(mux_pll_src_dpll_gpll_usb480m_p)	= { "dpll", "gpll", "usb480m" };
 PNAME(mux_uart0_p)		= { "uart0_src", "uart0_frac", "xin24m" };
 PNAME(mux_uart1_p)		= { "uart1_src", "uart1_frac", "xin24m" };
 PNAME(mux_uart2_p)		= { "uart2_src", "uart2_frac", "xin24m" };
-PNAME(mux_sclk_macphy_p)	= { "sclk_macphy_pre", "ext_gmac" };
+PNAME(mux_sclk_macphy_p)	= { "ext_gmac", "sclk_macphy_pre" };
 PNAME(mux_i2s0_pre_p)		= { "i2s0_src", "i2s0_frac", "ext_i2s", "xin12m" };
 PNAME(mux_i2s_out_p)		= { "i2s0_pre", "xin12m" };
-PNAME(mux_i2s1_p)		= { "i2s1_src", "i2s1_frac", "xin12m" };
-PNAME(mux_i2s2_p)		= { "i2s2_src", "i2s2_frac", "xin12m" };
+PNAME(mux_i2s1_p)		= { "i2s1_src", "i2s1_frac", "dummy", "xin12m" };
+PNAME(mux_i2s2_p)		= { "i2s2_src", "i2s2_frac", "dummy", "xin12m" };
 PNAME(mux_wifi_src_p)		= { "gpll", "xin24m" };
 PNAME(mux_cifout_src_p)	= { "hdmiphy", "gpll" };
 PNAME(mux_cifout_p)		= { "sclk_cifout_src", "xin24m" };
@@ -197,10 +197,10 @@ static struct rockchip_clk_branch rv1108_i2s2_fracmux __initdata =
 			RV1108_CLKSEL_CON(7), 12, 2, MFLAGS);
 
 static struct rockchip_clk_branch rv1108_clk_branches[] __initdata = {
-	MUX(0, "hdmi_phy", mux_hdmiphy_phy_p, CLK_SET_RATE_PARENT,
-			RV1108_MISC_CON, 13, 2, MFLAGS),
+	MUX(0, "hdmiphy", mux_hdmiphy_phy_p, CLK_SET_RATE_PARENT,
+			RV1108_MISC_CON, 13, 1, MFLAGS),
 	MUX(0, "usb480m", mux_usb480m_pre_p, CLK_SET_RATE_PARENT,
-			RV1108_MISC_CON, 15, 2, MFLAGS),
+			RV1108_MISC_CON, 15, 1, MFLAGS),
 	/*
 	 * Clock-Architecture Diagram 2
 	 */
@@ -442,7 +442,7 @@ static struct rockchip_clk_branch rv1108_clk_branches[] __initdata = {
 	GATE(0, "dclk_hdmiphy_src_dpll", "dpll", CLK_IGNORE_UNUSED,
 			RV1108_CLKGATE_CON(6), 4, GFLAGS),
 	COMPOSITE_NOGATE(0, "dclk_hdmiphy_pre", mux_dclk_hdmiphy_pre_p, 0,
-			RV1108_CLKSEL_CON(32), 6, 2, MFLAGS, 8, 6, DFLAGS),
+			RV1108_CLKSEL_CON(32), 6, 1, MFLAGS, 8, 6, DFLAGS),
 	COMPOSITE_NOGATE(DCLK_VOP_SRC, "dclk_vop_src", mux_dclk_hdmiphy_pre_p, 0,
 			RV1108_CLKSEL_CON(32), 6, 1, MFLAGS, 0, 6, DFLAGS),
 	MUX(DCLK_HDMIPHY, "dclk_hdmiphy", mux_dclk_hdmiphy_p, CLK_SET_RATE_PARENT,
@@ -509,7 +509,7 @@ static struct rockchip_clk_branch rv1108_clk_branches[] __initdata = {
 	COMPOSITE(SCLK_I2S0_SRC, "i2s0_src", mux_pll_src_2plls_p, 0,
 			RV1108_CLKSEL_CON(5), 8, 1, MFLAGS, 0, 7, DFLAGS,
 			RV1108_CLKGATE_CON(2), 0, GFLAGS),
-	COMPOSITE_FRACMUX(0, "i2s1_frac", "i2s1_src", CLK_SET_RATE_PARENT,
+	COMPOSITE_FRACMUX(0, "i2s0_frac", "i2s0_src", CLK_SET_RATE_PARENT,
 			RV1108_CLKSEL_CON(8), 0,
 			RV1108_CLKGATE_CON(2), 1, GFLAGS,
 			&rv1108_i2s0_fracmux),
@@ -519,7 +519,7 @@ static struct rockchip_clk_branch rv1108_clk_branches[] __initdata = {
 			RV1108_CLKSEL_CON(5), 15, 1, MFLAGS,
 			RV1108_CLKGATE_CON(2), 3, GFLAGS),
 
-	COMPOSITE(0, "i2s1_src", mux_pll_src_2plls_p, 0,
+	COMPOSITE(SCLK_I2S1_SRC, "i2s1_src", mux_pll_src_2plls_p, 0,
 			RV1108_CLKSEL_CON(6), 8, 1, MFLAGS, 0, 7, DFLAGS,
 			RV1108_CLKGATE_CON(2), 4, GFLAGS),
 	COMPOSITE_FRACMUX(0, "i2s1_frac", "i2s1_src", CLK_SET_RATE_PARENT,
@@ -529,7 +529,7 @@ static struct rockchip_clk_branch rv1108_clk_branches[] __initdata = {
 	GATE(SCLK_I2S1, "sclk_i2s1", "i2s1_pre", CLK_SET_RATE_PARENT,
 			RV1108_CLKGATE_CON(2), 6, GFLAGS),
 
-	COMPOSITE(0, "i2s2_src", mux_pll_src_2plls_p, 0,
+	COMPOSITE(SCLK_I2S2_SRC, "i2s2_src", mux_pll_src_2plls_p, 0,
 			RV1108_CLKSEL_CON(7), 8, 1, MFLAGS, 0, 7, DFLAGS,
 			RV1108_CLKGATE_CON(3), 8, GFLAGS),
 	COMPOSITE_FRACMUX(0, "i2s2_frac", "i2s2_src", CLK_SET_RATE_PARENT,
@@ -548,23 +548,23 @@ static struct rockchip_clk_branch rv1108_clk_branches[] __initdata = {
 			RV1108_CLKGATE_CON(1), 2, GFLAGS),
 	COMPOSITE_NOGATE(ACLK_PRE, "aclk_bus_pre", mux_aclk_bus_src_p, 0,
 			RV1108_CLKSEL_CON(2), 8, 2, MFLAGS, 0, 5, DFLAGS),
-	COMPOSITE_NOMUX(0, "hclk_bus_pre", "aclk_bus_2wrap_occ", 0,
+	COMPOSITE_NOMUX(HCLK_BUS, "hclk_bus_pre", "aclk_bus_pre", 0,
 			RV1108_CLKSEL_CON(3), 0, 5, DFLAGS,
 			RV1108_CLKGATE_CON(1), 4, GFLAGS),
-	COMPOSITE_NOMUX(0, "pclken_bus", "aclk_bus_2wrap_occ", 0,
+	COMPOSITE_NOMUX(0, "pclk_bus_pre", "aclk_bus_pre", 0,
 			RV1108_CLKSEL_CON(3), 8, 5, DFLAGS,
 			RV1108_CLKGATE_CON(1), 5, GFLAGS),
-	GATE(0, "pclk_bus_pre", "pclken_bus", CLK_IGNORE_UNUSED,
+	GATE(PCLK_BUS, "pclk_bus", "pclk_bus_pre", 0,
 			RV1108_CLKGATE_CON(1), 6, GFLAGS),
-	GATE(0, "pclk_top_pre", "pclken_bus", CLK_IGNORE_UNUSED,
+	GATE(0, "pclk_top_pre", "pclk_bus_pre", CLK_IGNORE_UNUSED,
 			RV1108_CLKGATE_CON(1), 7, GFLAGS),
-	GATE(0, "pclk_ddr_pre", "pclken_bus", CLK_IGNORE_UNUSED,
+	GATE(0, "pclk_ddr_pre", "pclk_bus_pre", CLK_IGNORE_UNUSED,
 			RV1108_CLKGATE_CON(1), 8, GFLAGS),
-	GATE(0, "clk_timer0", "mux_pll_p", CLK_IGNORE_UNUSED,
+	GATE(SCLK_TIMER0, "clk_timer0", "xin24m", 0,
 			RV1108_CLKGATE_CON(1), 9, GFLAGS),
-	GATE(0, "clk_timer1", "mux_pll_p", CLK_IGNORE_UNUSED,
+	GATE(SCLK_TIMER1, "clk_timer1", "xin24m", CLK_IGNORE_UNUSED,
 			RV1108_CLKGATE_CON(1), 10, GFLAGS),
-	GATE(0, "pclk_timer", "pclk_bus_pre", CLK_IGNORE_UNUSED,
+	GATE(PCLK_TIMER, "pclk_timer", "pclk_bus_pre", CLK_IGNORE_UNUSED,
 			RV1108_CLKGATE_CON(13), 4, GFLAGS),
 
 	GATE(HCLK_I2S0_8CH, "hclk_i2s0_8ch", "hclk_bus_pre", 0,
@@ -588,13 +588,13 @@ static struct rockchip_clk_branch rv1108_clk_branches[] __initdata = {
 	GATE(PCLK_SPI, "pclk_spi", "pclk_bus_pre", 0,
 			RV1108_CLKGATE_CON(13), 5, GFLAGS),
 
-	COMPOSITE(0, "uart0_src", mux_pll_src_dpll_gpll_usb480m_p, CLK_IGNORE_UNUSED,
+	COMPOSITE(SCLK_UART0_SRC, "uart0_src", mux_pll_src_dpll_gpll_usb480m_p, CLK_IGNORE_UNUSED,
 			RV1108_CLKSEL_CON(13), 12, 2, MFLAGS, 0, 7, DFLAGS,
 			RV1108_CLKGATE_CON(3), 1, GFLAGS),
-	COMPOSITE(0, "uart1_src", mux_pll_src_dpll_gpll_usb480m_p, CLK_IGNORE_UNUSED,
+	COMPOSITE(SCLK_UART1_SRC, "uart1_src", mux_pll_src_dpll_gpll_usb480m_p, CLK_IGNORE_UNUSED,
 			RV1108_CLKSEL_CON(14), 12, 2, MFLAGS, 0, 7, DFLAGS,
 			RV1108_CLKGATE_CON(3), 3, GFLAGS),
-	COMPOSITE(0, "uart21_src", mux_pll_src_dpll_gpll_usb480m_p, CLK_IGNORE_UNUSED,
+	COMPOSITE(SCLK_UART2_SRC, "uart2_src", mux_pll_src_dpll_gpll_usb480m_p, CLK_IGNORE_UNUSED,
 			RV1108_CLKSEL_CON(15), 12, 2, MFLAGS, 0, 7, DFLAGS,
 			RV1108_CLKGATE_CON(3), 5, GFLAGS),
 
@@ -610,40 +610,40 @@ static struct rockchip_clk_branch rv1108_clk_branches[] __initdata = {
 			RV1108_CLKSEL_CON(18), 0,
 			RV1108_CLKGATE_CON(3), 6, GFLAGS,
 			&rv1108_uart2_fracmux),
-	GATE(PCLK_UART0, "pclk_uart0", "pclk_bus_pre", CLK_IGNORE_UNUSED,
+	GATE(PCLK_UART0, "pclk_uart0", "pclk_bus_pre", 0,
 			RV1108_CLKGATE_CON(13), 10, GFLAGS),
-	GATE(PCLK_UART1, "pclk_uart1", "pclk_bus_pre", CLK_IGNORE_UNUSED,
+	GATE(PCLK_UART1, "pclk_uart1", "pclk_bus_pre", 0,
 			RV1108_CLKGATE_CON(13), 11, GFLAGS),
-	GATE(PCLK_UART2, "pclk_uart2", "pclk_bus_pre", CLK_IGNORE_UNUSED,
+	GATE(PCLK_UART2, "pclk_uart2", "pclk_bus_pre", 0,
 			RV1108_CLKGATE_CON(13), 12, GFLAGS),
 
-	COMPOSITE(0, "clk_i2c1", mux_pll_src_2plls_p, CLK_IGNORE_UNUSED,
-			RV1108_CLKSEL_CON(19), 15, 2, MFLAGS, 8, 7, DFLAGS,
+	COMPOSITE(SCLK_I2C1, "clk_i2c1", mux_pll_src_2plls_p, 0,
+			RV1108_CLKSEL_CON(19), 15, 1, MFLAGS, 8, 7, DFLAGS,
 			RV1108_CLKGATE_CON(3), 7, GFLAGS),
-	COMPOSITE(0, "clk_i2c2", mux_pll_src_2plls_p, CLK_IGNORE_UNUSED,
-			RV1108_CLKSEL_CON(20), 7, 2, MFLAGS, 0, 7, DFLAGS,
+	COMPOSITE(SCLK_I2C2, "clk_i2c2", mux_pll_src_2plls_p, 0,
+			RV1108_CLKSEL_CON(20), 7, 1, MFLAGS, 0, 7, DFLAGS,
 			RV1108_CLKGATE_CON(3), 8, GFLAGS),
-	COMPOSITE(0, "clk_i2c3", mux_pll_src_2plls_p, CLK_IGNORE_UNUSED,
-			RV1108_CLKSEL_CON(20), 15, 2, MFLAGS, 8, 7, DFLAGS,
+	COMPOSITE(SCLK_I2C3, "clk_i2c3", mux_pll_src_2plls_p, 0,
+			RV1108_CLKSEL_CON(20), 15, 1, MFLAGS, 8, 7, DFLAGS,
 			RV1108_CLKGATE_CON(3), 9, GFLAGS),
-	GATE(0, "pclk_i2c1", "pclk_bus_pre", CLK_IGNORE_UNUSED,
+	GATE(PCLK_I2C1, "pclk_i2c1", "pclk_bus_pre", 0,
 			RV1108_CLKGATE_CON(13), 0, GFLAGS),
-	GATE(0, "pclk_i2c2", "pclk_bus_pre", CLK_IGNORE_UNUSED,
+	GATE(PCLK_I2C2, "pclk_i2c2", "pclk_bus_pre", 0,
 			RV1108_CLKGATE_CON(13), 1, GFLAGS),
-	GATE(0, "pclk_i2c3", "pclk_bus_pre", CLK_IGNORE_UNUSED,
+	GATE(PCLK_I2C3, "pclk_i2c3", "pclk_bus_pre", 0,
 			RV1108_CLKGATE_CON(13), 2, GFLAGS),
-	COMPOSITE(0, "clk_pwm1", mux_pll_src_2plls_p, CLK_IGNORE_UNUSED,
+	COMPOSITE(SCLK_PWM, "clk_pwm1", mux_pll_src_2plls_p, 0,
 			RV1108_CLKSEL_CON(12), 15, 2, MFLAGS, 8, 7, DFLAGS,
 			RV1108_CLKGATE_CON(3), 10, GFLAGS),
-	GATE(0, "pclk_pwm1", "pclk_bus_pre", CLK_IGNORE_UNUSED,
+	GATE(PCLK_PWM, "pclk_pwm1", "pclk_bus_pre", 0,
 			RV1108_CLKGATE_CON(13), 6, GFLAGS),
-	GATE(0, "pclk_wdt", "pclk_bus_pre", CLK_IGNORE_UNUSED,
+	GATE(PCLK_WDT, "pclk_wdt", "pclk_bus_pre", 0,
 			RV1108_CLKGATE_CON(13), 3, GFLAGS),
-	GATE(0, "pclk_gpio1", "pclk_bus_pre", CLK_IGNORE_UNUSED,
+	GATE(PCLK_GPIO1, "pclk_gpio1", "pclk_bus_pre", 0,
 			RV1108_CLKGATE_CON(13), 7, GFLAGS),
-	GATE(0, "pclk_gpio2", "pclk_bus_pre", CLK_IGNORE_UNUSED,
+	GATE(PCLK_GPIO2, "pclk_gpio2", "pclk_bus_pre", 0,
 			RV1108_CLKGATE_CON(13), 8, GFLAGS),
-	GATE(0, "pclk_gpio3", "pclk_bus_pre", CLK_IGNORE_UNUSED,
+	GATE(PCLK_GPIO3, "pclk_gpio3", "pclk_bus_pre", 0,
 			RV1108_CLKGATE_CON(13), 9, GFLAGS),
 
 	GATE(0, "pclk_grf", "pclk_bus_pre", CLK_IGNORE_UNUSED,
@@ -677,15 +677,17 @@ static struct rockchip_clk_branch rv1108_clk_branches[] __initdata = {
 			RV1108_CLKGATE_CON(0), 9, GFLAGS),
 	GATE(0, "gpll_ddr", "gpll", CLK_IGNORE_UNUSED,
 			RV1108_CLKGATE_CON(0), 10, GFLAGS),
-	COMPOSITE(0, "ddrphy4x", mux_ddrphy_p, CLK_IGNORE_UNUSED,
+	COMPOSITE_NOGATE(0, "clk_ddrphy_src", mux_ddrphy_p, CLK_IGNORE_UNUSED,
 			RV1108_CLKSEL_CON(4), 8, 2, MFLAGS, 0, 3,
-			DFLAGS | CLK_DIVIDER_POWER_OF_TWO,
+			DFLAGS | CLK_DIVIDER_POWER_OF_TWO),
+	FACTOR(0, "clk_ddr", "clk_ddrphy_src", 0, 1, 2),
+	GATE(0, "clk_ddrphy4x", "clk_ddr", CLK_IGNORE_UNUSED,
 			RV1108_CLKGATE_CON(10), 9, GFLAGS),
-	GATE(0, "ddrupctl", "ddrphy_pre", CLK_IGNORE_UNUSED,
+	GATE(0, "pclk_ddrupctl", "pclk_ddr_pre", CLK_IGNORE_UNUSED,
 			RV1108_CLKGATE_CON(12), 4, GFLAGS),
-	GATE(0, "ddrc", "ddrphy", CLK_IGNORE_UNUSED,
+	GATE(0, "nclk_ddrupctl", "clk_ddr", CLK_IGNORE_UNUSED,
 			RV1108_CLKGATE_CON(12), 5, GFLAGS),
-	GATE(0, "ddrmon", "ddrphy_pre", CLK_IGNORE_UNUSED,
+	GATE(0, "pclk_ddrmon", "pclk_ddr_pre", CLK_IGNORE_UNUSED,
 			RV1108_CLKGATE_CON(12), 6, GFLAGS),
 	GATE(0, "timer_clk", "xin24m", CLK_IGNORE_UNUSED,
 			RV1108_CLKGATE_CON(0), 11, GFLAGS),
@@ -702,20 +704,20 @@ static struct rockchip_clk_branch rv1108_clk_branches[] __initdata = {
 	COMPOSITE_NOMUX(0, "pclk_periph_pre", "gpll", 0,
 			RV1108_CLKSEL_CON(23), 10, 5, DFLAGS,
 			RV1108_CLKGATE_CON(4), 5, GFLAGS),
-	GATE(0, "pclk_periph", "pclk_periph_pre", CLK_IGNORE_UNUSED,
+	GATE(PCLK_PERI, "pclk_periph", "pclk_periph_pre", CLK_IGNORE_UNUSED,
 			RV1108_CLKGATE_CON(15), 13, GFLAGS),
 	COMPOSITE_NOMUX(0, "hclk_periph_pre", "gpll", 0,
 			RV1108_CLKSEL_CON(23), 5, 5, DFLAGS,
 			RV1108_CLKGATE_CON(4), 4, GFLAGS),
-	GATE(0, "hclk_periph", "hclk_periph_pre", CLK_IGNORE_UNUSED,
+	GATE(HCLK_PERI, "hclk_periph", "hclk_periph_pre", CLK_IGNORE_UNUSED,
 			RV1108_CLKGATE_CON(15), 12, GFLAGS),
 
 	GATE(0, "aclk_peri_src_dpll", "dpll", CLK_IGNORE_UNUSED,
 			RV1108_CLKGATE_CON(4), 1, GFLAGS),
 	GATE(0, "aclk_peri_src_gpll", "gpll", CLK_IGNORE_UNUSED,
 			RV1108_CLKGATE_CON(4), 2, GFLAGS),
-	COMPOSITE(0, "aclk_periph", mux_aclk_peri_src_p, CLK_IGNORE_UNUSED,
-			RV1108_CLKSEL_CON(23), 15, 2, MFLAGS, 0, 5, DFLAGS,
+	COMPOSITE(ACLK_PERI, "aclk_periph", mux_aclk_peri_src_p, 0,
+			RV1108_CLKSEL_CON(23), 15, 1, MFLAGS, 0, 5, DFLAGS,
 			RV1108_CLKGATE_CON(15), 11, GFLAGS),
 
 	COMPOSITE(SCLK_SDMMC, "sclk_sdmmc0", mux_mmc_src_p, 0,
@@ -738,7 +740,7 @@ static struct rockchip_clk_branch rv1108_clk_branches[] __initdata = {
 	GATE(HCLK_EMMC, "hclk_emmc", "hclk_periph", 0, RV1108_CLKGATE_CON(15), 2, GFLAGS),
 
 	COMPOSITE(SCLK_NANDC, "sclk_nandc", mux_pll_src_2plls_p, 0,
-			RV1108_CLKSEL_CON(27), 14, 2, MFLAGS, 8, 5, DFLAGS,
+			RV1108_CLKSEL_CON(27), 14, 1, MFLAGS, 8, 5, DFLAGS,
 			RV1108_CLKGATE_CON(5), 3, GFLAGS),
 	GATE(HCLK_NANDC, "hclk_nandc", "hclk_periph", 0, RV1108_CLKGATE_CON(15), 3, GFLAGS),
 
@@ -747,19 +749,20 @@ static struct rockchip_clk_branch rv1108_clk_branches[] __initdata = {
 	GATE(HCLK_OTG, "hclk_otg", "hclk_periph", 0, RV1108_CLKGATE_CON(15), 8, GFLAGS),
 	GATE(0, "hclk_otg_pmu", "hclk_periph", CLK_IGNORE_UNUSED, RV1108_CLKGATE_CON(15), 9, GFLAGS),
 	GATE(SCLK_USBPHY, "clk_usbphy", "xin24m", CLK_IGNORE_UNUSED, RV1108_CLKGATE_CON(5), 5, GFLAGS),
+
 	COMPOSITE(SCLK_SFC, "sclk_sfc", mux_pll_src_2plls_p, 0,
-			RV1108_CLKSEL_CON(27), 7, 2, MFLAGS, 0, 7, DFLAGS,
+			RV1108_CLKSEL_CON(27), 7, 1, MFLAGS, 0, 7, DFLAGS,
 			RV1108_CLKGATE_CON(5), 4, GFLAGS),
 	GATE(HCLK_SFC, "hclk_sfc", "hclk_periph", 0, RV1108_CLKGATE_CON(15), 10, GFLAGS),
 
-	COMPOSITE(0, "sclk_macphy_pre", mux_pll_src_apll_gpll_p, 0,
-			RV1108_CLKSEL_CON(24), 12, 2, MFLAGS, 0, 5, DFLAGS,
+	COMPOSITE(SCLK_MACPHY_PRE, "sclk_macphy_pre", mux_pll_src_apll_gpll_p, 0,
+			RV1108_CLKSEL_CON(24), 12, 1, MFLAGS, 0, 5, DFLAGS,
 			RV1108_CLKGATE_CON(4), 10, GFLAGS),
-	MUX(0, "sclk_macphy", mux_sclk_macphy_p, CLK_SET_RATE_PARENT,
-			RV1108_CLKSEL_CON(24), 8, 2, MFLAGS),
-	GATE(0, "sclk_macphy_rx", "sclk_macphy", 0, RV1108_CLKGATE_CON(4), 8, GFLAGS),
-	GATE(0, "sclk_mac_ref", "sclk_macphy", 0, RV1108_CLKGATE_CON(4), 6, GFLAGS),
-	GATE(0, "sclk_mac_refout", "sclk_macphy", 0, RV1108_CLKGATE_CON(4), 7, GFLAGS),
+	MUX(SCLK_MACPHY, "sclk_macphy", mux_sclk_macphy_p, CLK_SET_RATE_PARENT,
+			RV1108_CLKSEL_CON(24), 8, 1, MFLAGS),
+	GATE(SCLK_MACPHY_RX, "sclk_macphy_rx", "sclk_macphy", 0, RV1108_CLKGATE_CON(4), 8, GFLAGS),
+	GATE(SCLK_MAC_REF, "sclk_mac_ref", "sclk_macphy", 0, RV1108_CLKGATE_CON(4), 6, GFLAGS),
+	GATE(SCLK_MAC_REFOUT, "sclk_mac_refout", "sclk_macphy", 0, RV1108_CLKGATE_CON(4), 7, GFLAGS),
 
 	MMC(SCLK_SDMMC_DRV,    "sdmmc_drv",    "sclk_sdmmc", RV1108_SDMMC_CON0, 1),
 	MMC(SCLK_SDMMC_SAMPLE, "sdmmc_sample", "sclk_sdmmc", RV1108_SDMMC_CON1, 1),
-- 
cgit v1.2.3


From a52394e9a0a8cea8e1501b3860e067d54e43c8de Mon Sep 17 00:00:00 2001
From: Elaine Zhang <zhangqing@rock-chips.com>
Date: Tue, 8 Aug 2017 15:19:17 +0800
Subject: clk: rockchip: rename some of clks for rv1108 SoC

Rename some of clks to keep the consistency with the TRM.

Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
---
 drivers/clk/rockchip/clk-rv1108.c | 28 ++++++++++++++--------------
 1 file changed, 14 insertions(+), 14 deletions(-)

diff --git a/drivers/clk/rockchip/clk-rv1108.c b/drivers/clk/rockchip/clk-rv1108.c
index 620992ac212e..f907b67745e4 100644
--- a/drivers/clk/rockchip/clk-rv1108.c
+++ b/drivers/clk/rockchip/clk-rv1108.c
@@ -276,24 +276,24 @@ static struct rockchip_clk_branch rv1108_clk_branches[] __initdata = {
 	COMPOSITE_NOMUX(0, "pmu_24m_ena", "gpll", CLK_IGNORE_UNUSED,
 			RV1108_CLKSEL_CON(38), 0, 5, DFLAGS,
 			RV1108_CLKGATE_CON(8), 12, GFLAGS),
-	GATE(0, "pmu", "pmu_24m_ena", CLK_IGNORE_UNUSED,
+	GATE(0, "pclk_pmu", "pmu_24m_ena", CLK_IGNORE_UNUSED,
 			RV1108_CLKGATE_CON(10), 0, GFLAGS),
-	GATE(0, "intmem1", "pmu_24m_ena", CLK_IGNORE_UNUSED,
+	GATE(0, "pclk_intmem1", "pmu_24m_ena", CLK_IGNORE_UNUSED,
 			RV1108_CLKGATE_CON(10), 1, GFLAGS),
-	GATE(0, "gpio0_pmu", "pmu_24m_ena", CLK_IGNORE_UNUSED,
+	GATE(PCLK_GPIO0_PMU, "pclk_gpio0_pmu", "pmu_24m_ena", 0,
 			RV1108_CLKGATE_CON(10), 2, GFLAGS),
-	GATE(0, "pmugrf", "pmu_24m_ena", CLK_IGNORE_UNUSED,
+	GATE(0, "pclk_pmugrf", "pmu_24m_ena", CLK_IGNORE_UNUSED,
 			RV1108_CLKGATE_CON(10), 3, GFLAGS),
-	GATE(0, "pmu_noc", "pmu_24m_ena", CLK_IGNORE_UNUSED,
+	GATE(0, "pclk_pmu_niu", "pmu_24m_ena", CLK_IGNORE_UNUSED,
 			RV1108_CLKGATE_CON(10), 4, GFLAGS),
-	GATE(0, "i2c0_pmu_pclk", "pmu_24m_ena", CLK_IGNORE_UNUSED,
+	GATE(PCLK_I2C0_PMU, "pclk_i2c0_pmu", "pmu_24m_ena", 0,
 			RV1108_CLKGATE_CON(10), 5, GFLAGS),
-	GATE(0, "pwm0_pmu_pclk", "pmu_24m_ena", CLK_IGNORE_UNUSED,
+	GATE(PCLK_PWM0_PMU, "pclk_pwm0_pmu", "pmu_24m_ena", 0,
 			RV1108_CLKGATE_CON(10), 6, GFLAGS),
-	COMPOSITE(0, "pwm0_pmu_clk", mux_pll_src_2plls_p, CLK_IGNORE_UNUSED,
+	COMPOSITE(SCLK_PWM0_PMU, "sclk_pwm0_pmu", mux_pll_src_2plls_p, 0,
 			RV1108_CLKSEL_CON(12), 7, 1, MFLAGS, 0, 7, DFLAGS,
 			RV1108_CLKGATE_CON(8), 15, GFLAGS),
-	COMPOSITE(0, "i2c0_pmu_clk", mux_pll_src_2plls_p, CLK_IGNORE_UNUSED,
+	COMPOSITE(SCLK_I2C0_PMU, "sclk_i2c0_pmu", mux_pll_src_2plls_p, 0,
 			RV1108_CLKSEL_CON(19), 7, 1, MFLAGS, 0, 7, DFLAGS,
 			RV1108_CLKGATE_CON(8), 14, GFLAGS),
 	GATE(0, "pvtm_pmu", "xin24m", CLK_IGNORE_UNUSED,
@@ -410,10 +410,10 @@ static struct rockchip_clk_branch rv1108_clk_branches[] __initdata = {
 	/*
 	 * Clock-Architecture Diagram 4
 	 */
-	COMPOSITE(0, "aclk_vio0_2wrap_occ", mux_pll_src_4plls_p, CLK_IGNORE_UNUSED,
+	COMPOSITE(0, "aclk_vio0_pre", mux_pll_src_4plls_p, CLK_IGNORE_UNUSED,
 			RV1108_CLKSEL_CON(28), 6, 2, MFLAGS, 0, 5, DFLAGS,
 			RV1108_CLKGATE_CON(6), 0, GFLAGS),
-	GATE(0, "aclk_vio0_pre", "aclk_vio0_2wrap_occ", CLK_IGNORE_UNUSED,
+	GATE(ACLK_VIO0, "aclk_vio0", "aclk_vio0_pre", 0,
 			RV1108_CLKGATE_CON(17), 0, GFLAGS),
 	COMPOSITE_NOMUX(0, "hclk_vio_pre", "aclk_vio0_pre", 0,
 			RV1108_CLKSEL_CON(29), 0, 5, DFLAGS,
@@ -632,10 +632,10 @@ static struct rockchip_clk_branch rv1108_clk_branches[] __initdata = {
 			RV1108_CLKGATE_CON(13), 1, GFLAGS),
 	GATE(PCLK_I2C3, "pclk_i2c3", "pclk_bus_pre", 0,
 			RV1108_CLKGATE_CON(13), 2, GFLAGS),
-	COMPOSITE(SCLK_PWM, "clk_pwm1", mux_pll_src_2plls_p, 0,
+	COMPOSITE(SCLK_PWM, "clk_pwm", mux_pll_src_2plls_p, 0,
 			RV1108_CLKSEL_CON(12), 15, 2, MFLAGS, 8, 7, DFLAGS,
 			RV1108_CLKGATE_CON(3), 10, GFLAGS),
-	GATE(PCLK_PWM, "pclk_pwm1", "pclk_bus_pre", 0,
+	GATE(PCLK_PWM, "pclk_pwm", "pclk_bus_pre", 0,
 			RV1108_CLKGATE_CON(13), 6, GFLAGS),
 	GATE(PCLK_WDT, "pclk_wdt", "pclk_bus_pre", 0,
 			RV1108_CLKGATE_CON(13), 3, GFLAGS),
@@ -720,7 +720,7 @@ static struct rockchip_clk_branch rv1108_clk_branches[] __initdata = {
 			RV1108_CLKSEL_CON(23), 15, 1, MFLAGS, 0, 5, DFLAGS,
 			RV1108_CLKGATE_CON(15), 11, GFLAGS),
 
-	COMPOSITE(SCLK_SDMMC, "sclk_sdmmc0", mux_mmc_src_p, 0,
+	COMPOSITE(SCLK_SDMMC, "sclk_sdmmc", mux_mmc_src_p, 0,
 			RV1108_CLKSEL_CON(25), 8, 2, MFLAGS, 0, 8, DFLAGS,
 			RV1108_CLKGATE_CON(5), 0, GFLAGS),
 
-- 
cgit v1.2.3


From b75f38451a5d7b6893087ca6c0ec7b01491f60b0 Mon Sep 17 00:00:00 2001
From: Elaine Zhang <zhangqing@rock-chips.com>
Date: Tue, 8 Aug 2017 15:19:33 +0800
Subject: clk: rockchip: add some critical clocks for rv1108 SoC

the bus/periph/nclk_ddrupctl/pclk_ddrmon/pclk_acodecphy/pclk_pmu
no driver to handle them,
Chip design requirements for these clock to always on.

Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
---
 drivers/clk/rockchip/clk-rv1108.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/clk/rockchip/clk-rv1108.c b/drivers/clk/rockchip/clk-rv1108.c
index f907b67745e4..d1065dd9f442 100644
--- a/drivers/clk/rockchip/clk-rv1108.c
+++ b/drivers/clk/rockchip/clk-rv1108.c
@@ -776,10 +776,16 @@ static struct rockchip_clk_branch rv1108_clk_branches[] __initdata = {
 
 static const char *const rv1108_critical_clocks[] __initconst = {
 	"aclk_core",
-	"aclk_bus_src_gpll",
+	"aclk_bus",
+	"hclk_bus",
+	"pclk_bus",
 	"aclk_periph",
 	"hclk_periph",
 	"pclk_periph",
+	"nclk_ddrupctl",
+	"pclk_ddrmon",
+	"pclk_acodecphy",
+	"pclk_pmu",
 };
 
 static void __init rv1108_clk_init(struct device_node *np)
-- 
cgit v1.2.3


From 6d4ce2b7d90e24e07ec7f763043b90eda22c8351 Mon Sep 17 00:00:00 2001
From: Elaine Zhang <zhangqing@rock-chips.com>
Date: Tue, 1 Aug 2017 09:17:04 +0800
Subject: dt-bindings: add documentation for rk3126 clock

This add bindings documentation for rk3126 SoCs.

Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
---
 Documentation/devicetree/bindings/clock/rockchip,rk3128-cru.txt | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3128-cru.txt b/Documentation/devicetree/bindings/clock/rockchip,rk3128-cru.txt
index 455a9a00a623..6f8744fd301b 100644
--- a/Documentation/devicetree/bindings/clock/rockchip,rk3128-cru.txt
+++ b/Documentation/devicetree/bindings/clock/rockchip,rk3128-cru.txt
@@ -1,12 +1,14 @@
-* Rockchip RK3128 Clock and Reset Unit
+* Rockchip RK3126/RK3128 Clock and Reset Unit
 
-The RK3128 clock controller generates and supplies clock to various
+The RK3126/RK3128 clock controller generates and supplies clock to various
 controllers within the SoC and also implements a reset controller for SoC
 peripherals.
 
 Required Properties:
 
-- compatible: should be "rockchip,rk3128-cru"
+- compatible: should be "rockchip,rk3126-cru" or "rockchip,rk3128-cru"
+  "rockchip,rk3126-cru" - controller compatible with RK3126 SoC.
+  "rockchip,rk3128-cru" - controller compatible with RK3128 SoC.
 - reg: physical base address of the controller and length of memory mapped
   region.
 - #clock-cells: should be 1.
-- 
cgit v1.2.3


From 334614058886fc5002dbfa2c4c72f89b3830f7e1 Mon Sep 17 00:00:00 2001
From: Elaine Zhang <zhangqing@rock-chips.com>
Date: Tue, 1 Aug 2017 09:17:03 +0800
Subject: clk: rockchip: modify rk3128 clk driver to also support rk3126

rk3128 and rk3126 have some gate registers describe differences.
So need to make some distinctions.
The RK3126 and RK3128 Same clock description we move it to
the common clock branches.
And the different clks description use the own clock branches.

Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
---
 drivers/clk/rockchip/clk-rk3128.c | 69 +++++++++++++++++++++++++++++++--------
 1 file changed, 55 insertions(+), 14 deletions(-)

diff --git a/drivers/clk/rockchip/clk-rk3128.c b/drivers/clk/rockchip/clk-rk3128.c
index e243f2eae68f..62d7854e4b87 100644
--- a/drivers/clk/rockchip/clk-rk3128.c
+++ b/drivers/clk/rockchip/clk-rk3128.c
@@ -201,7 +201,7 @@ static struct rockchip_clk_branch rk3128_uart2_fracmux __initdata =
 	MUX(SCLK_UART2, "sclk_uart2", mux_uart2_p, CLK_SET_RATE_PARENT,
 			RK2928_CLKSEL_CON(15), 8, 2, MFLAGS);
 
-static struct rockchip_clk_branch rk3128_clk_branches[] __initdata = {
+static struct rockchip_clk_branch common_clk_branches[] __initdata = {
 	/*
 	 * Clock-Architecture Diagram 1
 	 */
@@ -459,10 +459,6 @@ static struct rockchip_clk_branch rk3128_clk_branches[] __initdata = {
 			RK2928_CLKSEL_CON(2), 14, 2, MFLAGS, 8, 5, DFLAGS,
 			RK2928_CLKGATE_CON(10), 15, GFLAGS),
 
-	COMPOSITE(SCLK_SFC, "sclk_sfc", mux_sclk_sfc_src_p, 0,
-			RK2928_CLKSEL_CON(11), 14, 2, MFLAGS, 8, 5, DFLAGS,
-			RK2928_CLKGATE_CON(3), 15, GFLAGS),
-
 	COMPOSITE_NOMUX(PCLK_PMU_PRE, "pclk_pmu_pre", "cpll", 0,
 			RK2928_CLKSEL_CON(29), 8, 6, DFLAGS,
 			RK2928_CLKGATE_CON(1), 0, GFLAGS),
@@ -495,7 +491,6 @@ static struct rockchip_clk_branch rk3128_clk_branches[] __initdata = {
 	GATE(ACLK_DMAC, "aclk_dmac", "aclk_peri", 0, RK2928_CLKGATE_CON(5), 1, GFLAGS),
 	GATE(0, "aclk_peri_niu", "aclk_peri", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(9), 15, GFLAGS),
 	GATE(0, "aclk_cpu_to_peri", "aclk_peri", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(4), 2, GFLAGS),
-	GATE(HCLK_GPS, "hclk_gps", "aclk_peri", 0, RK2928_CLKGATE_CON(3), 14, GFLAGS),
 
 	GATE(HCLK_I2S_8CH, "hclk_i2s_8ch", "hclk_peri", 0, RK2928_CLKGATE_CON(7), 4, GFLAGS),
 	GATE(0, "hclk_peri_matrix", "hclk_peri", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(4), 0, GFLAGS),
@@ -541,7 +536,6 @@ static struct rockchip_clk_branch rk3128_clk_branches[] __initdata = {
 	GATE(0, "hclk_rom", "hclk_cpu", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(5), 6, GFLAGS),
 	GATE(HCLK_CRYPTO, "hclk_crypto", "hclk_cpu", 0, RK2928_CLKGATE_CON(3), 5, GFLAGS),
 
-	GATE(PCLK_HDMI, "pclk_hdmi", "pclk_cpu", 0, RK2928_CLKGATE_CON(3), 8, GFLAGS),
 	GATE(PCLK_ACODEC, "pclk_acodec", "pclk_cpu", 0, RK2928_CLKGATE_CON(5), 14, GFLAGS),
 	GATE(0, "pclk_ddrupctl", "pclk_cpu", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(5), 7, GFLAGS),
 	GATE(0, "pclk_grf", "pclk_cpu", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(5), 4, GFLAGS),
@@ -561,6 +555,21 @@ static struct rockchip_clk_branch rk3128_clk_branches[] __initdata = {
 	MMC(SCLK_EMMC_SAMPLE,  "emmc_sample",  "sclk_emmc",  RK3228_EMMC_CON1,  0),
 };
 
+static struct rockchip_clk_branch rk3126_clk_branches[] __initdata = {
+	GATE(0, "pclk_stimer", "pclk_cpu", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(3), 15, GFLAGS),
+	GATE(0, "pclk_s_efuse", "pclk_cpu", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(3), 14, GFLAGS),
+	GATE(0, "pclk_sgrf", "pclk_cpu", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(3), 8, GFLAGS),
+};
+
+static struct rockchip_clk_branch rk3128_clk_branches[] __initdata = {
+	COMPOSITE(SCLK_SFC, "sclk_sfc", mux_sclk_sfc_src_p, 0,
+			RK2928_CLKSEL_CON(11), 14, 2, MFLAGS, 8, 5, DFLAGS,
+			RK2928_CLKGATE_CON(3), 15, GFLAGS),
+
+	GATE(HCLK_GPS, "hclk_gps", "aclk_peri", 0, RK2928_CLKGATE_CON(3), 14, GFLAGS),
+	GATE(PCLK_HDMI, "pclk_hdmi", "pclk_cpu", 0, RK2928_CLKGATE_CON(3), 8, GFLAGS),
+};
+
 static const char *const rk3128_critical_clocks[] __initconst = {
 	"aclk_cpu",
 	"hclk_cpu",
@@ -570,7 +579,7 @@ static const char *const rk3128_critical_clocks[] __initconst = {
 	"pclk_peri",
 };
 
-static void __init rk3128_clk_init(struct device_node *np)
+static struct rockchip_clk_provider *__init rk3128_common_clk_init(struct device_node *np)
 {
 	struct rockchip_clk_provider *ctx;
 	void __iomem *reg_base;
@@ -578,23 +587,21 @@ static void __init rk3128_clk_init(struct device_node *np)
 	reg_base = of_iomap(np, 0);
 	if (!reg_base) {
 		pr_err("%s: could not map cru region\n", __func__);
-		return;
+		return ERR_PTR(-ENOMEM);
 	}
 
 	ctx = rockchip_clk_init(np, reg_base, CLK_NR_CLKS);
 	if (IS_ERR(ctx)) {
 		pr_err("%s: rockchip clk init failed\n", __func__);
 		iounmap(reg_base);
-		return;
+		return ERR_PTR(-ENOMEM);
 	}
 
 	rockchip_clk_register_plls(ctx, rk3128_pll_clks,
 				   ARRAY_SIZE(rk3128_pll_clks),
 				   RK3128_GRF_SOC_STATUS0);
-	rockchip_clk_register_branches(ctx, rk3128_clk_branches,
-				  ARRAY_SIZE(rk3128_clk_branches));
-	rockchip_clk_protect_critical(rk3128_critical_clocks,
-				      ARRAY_SIZE(rk3128_critical_clocks));
+	rockchip_clk_register_branches(ctx, common_clk_branches,
+				  ARRAY_SIZE(common_clk_branches));
 
 	rockchip_clk_register_armclk(ctx, ARMCLK, "armclk",
 			mux_armclk_p, ARRAY_SIZE(mux_armclk_p),
@@ -606,6 +613,40 @@ static void __init rk3128_clk_init(struct device_node *np)
 
 	rockchip_register_restart_notifier(ctx, RK2928_GLB_SRST_FST, NULL);
 
+	return ctx;
+}
+
+static void __init rk3126_clk_init(struct device_node *np)
+{
+	struct rockchip_clk_provider *ctx;
+
+	ctx = rk3128_common_clk_init(np);
+	if (IS_ERR(ctx))
+		return;
+
+	rockchip_clk_register_branches(ctx, rk3126_clk_branches,
+				       ARRAY_SIZE(rk3126_clk_branches));
+	rockchip_clk_protect_critical(rk3128_critical_clocks,
+				      ARRAY_SIZE(rk3128_critical_clocks));
+
+	rockchip_clk_of_add_provider(np, ctx);
+}
+
+CLK_OF_DECLARE(rk3126_cru, "rockchip,rk3126-cru", rk3126_clk_init);
+
+static void __init rk3128_clk_init(struct device_node *np)
+{
+	struct rockchip_clk_provider *ctx;
+
+	ctx = rk3128_common_clk_init(np);
+	if (IS_ERR(ctx))
+		return;
+
+	rockchip_clk_register_branches(ctx, rk3128_clk_branches,
+				       ARRAY_SIZE(rk3128_clk_branches));
+	rockchip_clk_protect_critical(rk3128_critical_clocks,
+				      ARRAY_SIZE(rk3128_critical_clocks));
+
 	rockchip_clk_of_add_provider(np, ctx);
 }
 
-- 
cgit v1.2.3


From ec52e462564b9c5bfdf1f79638c537c7103e1d2b Mon Sep 17 00:00:00 2001
From: Elaine Zhang <zhangqing@rock-chips.com>
Date: Tue, 1 Aug 2017 18:21:22 +0200
Subject: clk: fractional-divider: allow overriding of approximation

Fractional dividers may have special requirements concerning numerator
and denominator selection that differ from just getting the best
approximation.

For example on Rockchip socs the denominator must be at least 20 times
larger than the numerator to generate precise clock frequencies.

Therefore add the ability to provide custom approximation functions.

Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
---
 drivers/clk/clk-fractional-divider.c | 28 ++++++++++++++++++++--------
 include/linux/clk-provider.h         |  3 +++
 2 files changed, 23 insertions(+), 8 deletions(-)

diff --git a/drivers/clk/clk-fractional-divider.c b/drivers/clk/clk-fractional-divider.c
index aab904618eb6..fdf625fb10fa 100644
--- a/drivers/clk/clk-fractional-divider.c
+++ b/drivers/clk/clk-fractional-divider.c
@@ -49,16 +49,12 @@ static unsigned long clk_fd_recalc_rate(struct clk_hw *hw,
 	return ret;
 }
 
-static long clk_fd_round_rate(struct clk_hw *hw, unsigned long rate,
-			      unsigned long *parent_rate)
+static void clk_fd_general_approximation(struct clk_hw *hw, unsigned long rate,
+					 unsigned long *parent_rate,
+					 unsigned long *m, unsigned long *n)
 {
 	struct clk_fractional_divider *fd = to_clk_fd(hw);
 	unsigned long scale;
-	unsigned long m, n;
-	u64 ret;
-
-	if (!rate || rate >= *parent_rate)
-		return *parent_rate;
 
 	/*
 	 * Get rate closer to *parent_rate to guarantee there is no overflow
@@ -71,7 +67,23 @@ static long clk_fd_round_rate(struct clk_hw *hw, unsigned long rate,
 
 	rational_best_approximation(rate, *parent_rate,
 			GENMASK(fd->mwidth - 1, 0), GENMASK(fd->nwidth - 1, 0),
-			&m, &n);
+			m, n);
+}
+
+static long clk_fd_round_rate(struct clk_hw *hw, unsigned long rate,
+			      unsigned long *parent_rate)
+{
+	struct clk_fractional_divider *fd = to_clk_fd(hw);
+	unsigned long m, n;
+	u64 ret;
+
+	if (!rate || rate >= *parent_rate)
+		return *parent_rate;
+
+	if (fd->approximation)
+		fd->approximation(hw, rate, parent_rate, &m, &n);
+	else
+		clk_fd_general_approximation(hw, rate, parent_rate, &m, &n);
 
 	ret = (u64)*parent_rate * m;
 	do_div(ret, n);
diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h
index c59c62571e4f..1fc113fbf955 100644
--- a/include/linux/clk-provider.h
+++ b/include/linux/clk-provider.h
@@ -565,6 +565,9 @@ struct clk_fractional_divider {
 	u8		nwidth;
 	u32		nmask;
 	u8		flags;
+	void		(*approximation)(struct clk_hw *hw,
+				unsigned long rate, unsigned long *parent_rate,
+				unsigned long *m, unsigned long *n);
 	spinlock_t	*lock;
 };
 
-- 
cgit v1.2.3


From 5d890c2df900db0197d46ec75383d7633ef41c82 Mon Sep 17 00:00:00 2001
From: Elaine Zhang <zhangqing@rock-chips.com>
Date: Tue, 1 Aug 2017 18:22:24 +0200
Subject: clk: rockchip: add special approximation to fix up fractional clk's
 jitter

>From Rockchips fractional divider description:
  3.1.9  Fractional divider usage
  To get specific frequency, clocks of I2S, SPDIF, UARTcan be generated by
  fractional divider. Generally you must set that denominator is 20 times
  larger than numerator to generate precise clock frequency. So the
  fractional divider applies only to generate low frequency clock like
  I2S, UART.

Therefore add a special approximation function that handles this
special requirement.

Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
---
 drivers/clk/rockchip/clk.c | 36 ++++++++++++++++++++++++++++++++++++
 1 file changed, 36 insertions(+)

diff --git a/drivers/clk/rockchip/clk.c b/drivers/clk/rockchip/clk.c
index fe1d393cf678..b6db79a00602 100644
--- a/drivers/clk/rockchip/clk.c
+++ b/drivers/clk/rockchip/clk.c
@@ -29,6 +29,7 @@
 #include <linux/mfd/syscon.h>
 #include <linux/regmap.h>
 #include <linux/reboot.h>
+#include <linux/rational.h>
 #include "clk.h"
 
 /**
@@ -164,6 +165,40 @@ static int rockchip_clk_frac_notifier_cb(struct notifier_block *nb,
 	return notifier_from_errno(ret);
 }
 
+/**
+ * fractional divider must set that denominator is 20 times larger than
+ * numerator to generate precise clock frequency.
+ */
+void rockchip_fractional_approximation(struct clk_hw *hw,
+		unsigned long rate, unsigned long *parent_rate,
+		unsigned long *m, unsigned long *n)
+{
+	struct clk_fractional_divider *fd = to_clk_fd(hw);
+	unsigned long p_rate, p_parent_rate;
+	struct clk_hw *p_parent;
+	unsigned long scale;
+
+	p_rate = clk_hw_get_rate(clk_hw_get_parent(hw));
+	if ((rate * 20 > p_rate) && (p_rate % rate != 0)) {
+		p_parent = clk_hw_get_parent(clk_hw_get_parent(hw));
+		p_parent_rate = clk_hw_get_rate(p_parent);
+		*parent_rate = p_parent_rate;
+	}
+
+	/*
+	 * Get rate closer to *parent_rate to guarantee there is no overflow
+	 * for m and n. In the result it will be the nearest rate left shifted
+	 * by (scale - fd->nwidth) bits.
+	 */
+	scale = fls_long(*parent_rate / rate - 1);
+	if (scale > fd->nwidth)
+		rate <<= scale - fd->nwidth;
+
+	rational_best_approximation(rate, *parent_rate,
+			GENMASK(fd->mwidth - 1, 0), GENMASK(fd->nwidth - 1, 0),
+			m, n);
+}
+
 static struct clk *rockchip_clk_register_frac_branch(
 		struct rockchip_clk_provider *ctx, const char *name,
 		const char *const *parent_names, u8 num_parents,
@@ -210,6 +245,7 @@ static struct clk *rockchip_clk_register_frac_branch(
 	div->nwidth = 16;
 	div->nmask = GENMASK(div->nwidth - 1, 0) << div->nshift;
 	div->lock = lock;
+	div->approximation = rockchip_fractional_approximation;
 	div_ops = &clk_fractional_divider_ops;
 
 	clk = clk_register_composite(NULL, name, parent_names, num_parents,
-- 
cgit v1.2.3


From 41097f25e9b2091d5d0a309cceb788704f21e1d2 Mon Sep 17 00:00:00 2001
From: Sylwester Nawrocki <s.nawrocki@samsung.com>
Date: Fri, 21 Jul 2017 16:18:19 +0200
Subject: clk: samsung: Fix mau_epll clock definition for exynos5422

Parent clock of the MAU_EPLL gate clock on exynos5422 is
"mout_user_mau_epll", not "mout_mau_epll_clk". This change
only affects exynos5422/5800.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
---
 drivers/clk/samsung/clk-exynos5420.c | 12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)

diff --git a/drivers/clk/samsung/clk-exynos5420.c b/drivers/clk/samsung/clk-exynos5420.c
index 0748a0b333c5..5f1180972226 100644
--- a/drivers/clk/samsung/clk-exynos5420.c
+++ b/drivers/clk/samsung/clk-exynos5420.c
@@ -590,6 +590,8 @@ static const struct samsung_gate_clock exynos5800_gate_clks[] __initconst = {
 				GATE_BUS_TOP, 24, 0, 0),
 	GATE(CLK_ACLK432_SCALER, "aclk432_scaler", "mout_user_aclk432_scaler",
 				GATE_BUS_TOP, 27, CLK_IS_CRITICAL, 0),
+	GATE(CLK_MAU_EPLL, "mau_epll", "mout_user_mau_epll",
+			SRC_MASK_TOP7, 20, 0, 0),
 };
 
 static const struct samsung_mux_clock exynos5420_mux_clks[] __initconst = {
@@ -629,6 +631,11 @@ static const struct samsung_div_clock exynos5420_div_clks[] __initconst = {
 			"mout_aclk400_wcore_bpll", DIV_TOP0, 16, 3),
 };
 
+static const struct samsung_gate_clock exynos5420_gate_clks[] __initconst = {
+	GATE(CLK_MAU_EPLL, "mau_epll", "mout_mau_epll_clk",
+			SRC_MASK_TOP7, 20, 0, 0),
+};
+
 static const struct samsung_mux_clock exynos5x_mux_clks[] __initconst = {
 	MUX(0, "mout_user_pclk66_gpio", mout_user_pclk66_gpio_p,
 			SRC_TOP7, 4, 1),
@@ -1001,9 +1008,6 @@ static const struct samsung_gate_clock exynos5x_gate_clks[] __initconst = {
 	GATE(0, "aclk300_disp1", "mout_user_aclk300_disp1",
 			SRC_MASK_TOP2, 24, CLK_IS_CRITICAL, 0),
 
-	GATE(CLK_MAU_EPLL, "mau_epll", "mout_mau_epll_clk",
-			SRC_MASK_TOP7, 20, 0, 0),
-
 	/* sclk */
 	GATE(CLK_SCLK_UART0, "sclk_uart0", "dout_uart0",
 		GATE_TOP_SCLK_PERIC, 0, CLK_SET_RATE_PARENT, 0),
@@ -1440,6 +1444,8 @@ static void __init exynos5x_clk_init(struct device_node *np,
 				ARRAY_SIZE(exynos5420_mux_clks));
 		samsung_clk_register_div(ctx, exynos5420_div_clks,
 				ARRAY_SIZE(exynos5420_div_clks));
+		samsung_clk_register_gate(ctx, exynos5420_gate_clks,
+				ARRAY_SIZE(exynos5420_gate_clks));
 	} else {
 		samsung_clk_register_fixed_factor(
 				ctx, exynos5800_fixed_factor_clks,
-- 
cgit v1.2.3


From 7df45a532c5ee3efe106e8a9042a3524b0b587b1 Mon Sep 17 00:00:00 2001
From: Sylwester Nawrocki <s.nawrocki@samsung.com>
Date: Mon, 17 Jul 2017 14:39:21 +0200
Subject: clk: samsung: Add CLK_SET_RATE_PARENT to some AUDSS CLK CON clocks

This allows clk rate propagation up to the clock tree so EPLL
can be reprogrammed indirectly when setting rate of the Audio
Subsystem clocks.
The advantage is that sound machine driver can operate only
on the leaf clocks rather than explicitly re-configuring
the root clock (EPLL).

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
---
 drivers/clk/samsung/clk-exynos-audss.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/clk/samsung/clk-exynos-audss.c b/drivers/clk/samsung/clk-exynos-audss.c
index 1fab56f396d4..b117783ed404 100644
--- a/drivers/clk/samsung/clk-exynos-audss.c
+++ b/drivers/clk/samsung/clk-exynos-audss.c
@@ -180,7 +180,7 @@ static int exynos_audss_clk_probe(struct platform_device *pdev)
 	}
 	clk_table[EXYNOS_MOUT_AUDSS] = clk_hw_register_mux(NULL, "mout_audss",
 				mout_audss_p, ARRAY_SIZE(mout_audss_p),
-				CLK_SET_RATE_NO_REPARENT,
+				CLK_SET_RATE_NO_REPARENT | CLK_SET_RATE_PARENT,
 				reg_base + ASS_CLK_SRC, 0, 1, 0, &lock);
 
 	cdclk = devm_clk_get(&pdev->dev, "cdclk");
@@ -195,11 +195,11 @@ static int exynos_audss_clk_probe(struct platform_device *pdev)
 				reg_base + ASS_CLK_SRC, 2, 2, 0, &lock);
 
 	clk_table[EXYNOS_DOUT_SRP] = clk_hw_register_divider(NULL, "dout_srp",
-				"mout_audss", 0, reg_base + ASS_CLK_DIV, 0, 4,
-				0, &lock);
+				"mout_audss", CLK_SET_RATE_PARENT,
+				reg_base + ASS_CLK_DIV, 0, 4, 0, &lock);
 
 	clk_table[EXYNOS_DOUT_AUD_BUS] = clk_hw_register_divider(NULL,
-				"dout_aud_bus", "dout_srp", 0,
+				"dout_aud_bus", "dout_srp", CLK_SET_RATE_PARENT,
 				reg_base + ASS_CLK_DIV, 4, 4, 0, &lock);
 
 	clk_table[EXYNOS_DOUT_I2S] = clk_hw_register_divider(NULL, "dout_i2s",
-- 
cgit v1.2.3


From 599cebea93e69c25e4cf027fc21d2bdf9a4a1ec7 Mon Sep 17 00:00:00 2001
From: Sylwester Nawrocki <s.nawrocki@samsung.com>
Date: Fri, 21 Jul 2017 16:21:02 +0200
Subject: clk: samsung: exynos542x: Enable clock rate propagation up to the
 EPLL

The CLK_SET_RATE_PARENT flag is added to clocks between the EPLL
and the audio subsystem clock controller so that the EPLL's output
frequency can be set indirectly with clk_set_rate() on a leaf clock.
That should be safe as EPLL is normally only used to generate clock
for the audio subsystem.
With this change we can avoid passing the EPLL clock to the ASoC
machine driver.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
---
 drivers/clk/samsung/clk-exynos5420.c | 15 ++++++++-------
 1 file changed, 8 insertions(+), 7 deletions(-)

diff --git a/drivers/clk/samsung/clk-exynos5420.c b/drivers/clk/samsung/clk-exynos5420.c
index 5f1180972226..699f499007d8 100644
--- a/drivers/clk/samsung/clk-exynos5420.c
+++ b/drivers/clk/samsung/clk-exynos5420.c
@@ -537,8 +537,8 @@ static const struct samsung_mux_clock exynos5800_mux_clks[] __initconst = {
 
 	MUX(CLK_MOUT_MX_MSPLL_CCORE, "mout_mx_mspll_ccore",
 			mout_mx_mspll_ccore_p, SRC_TOP7, 16, 2),
-	MUX(CLK_MOUT_MAU_EPLL, "mout_mau_epll_clk", mout_mau_epll_clk_5800_p,
-							SRC_TOP7, 20, 2),
+	MUX_F(CLK_MOUT_MAU_EPLL, "mout_mau_epll_clk", mout_mau_epll_clk_5800_p,
+			SRC_TOP7, 20, 2, CLK_SET_RATE_PARENT, 0),
 	MUX(0, "sclk_bpll", mout_bpll_p, SRC_TOP7, 24, 1),
 	MUX(0, "mout_epll2", mout_epll2_5800_p, SRC_TOP7, 28, 1),
 
@@ -547,8 +547,8 @@ static const struct samsung_mux_clock exynos5800_mux_clks[] __initconst = {
 	MUX(0, "mout_aclk432_cam", mout_group6_5800_p, SRC_TOP8, 24, 2),
 	MUX(0, "mout_aclk432_scaler", mout_group6_5800_p, SRC_TOP8, 28, 2),
 
-	MUX(CLK_MOUT_USER_MAU_EPLL, "mout_user_mau_epll", mout_group16_5800_p,
-							SRC_TOP9, 8, 1),
+	MUX_F(CLK_MOUT_USER_MAU_EPLL, "mout_user_mau_epll", mout_group16_5800_p,
+			SRC_TOP9, 8, 1, CLK_SET_RATE_PARENT, 0),
 	MUX(0, "mout_user_aclk550_cam", mout_group15_5800_p,
 							SRC_TOP9, 16, 1),
 	MUX(0, "mout_user_aclkfl1_550_cam", mout_group13_5800_p,
@@ -591,7 +591,7 @@ static const struct samsung_gate_clock exynos5800_gate_clks[] __initconst = {
 	GATE(CLK_ACLK432_SCALER, "aclk432_scaler", "mout_user_aclk432_scaler",
 				GATE_BUS_TOP, 27, CLK_IS_CRITICAL, 0),
 	GATE(CLK_MAU_EPLL, "mau_epll", "mout_user_mau_epll",
-			SRC_MASK_TOP7, 20, 0, 0),
+			SRC_MASK_TOP7, 20, CLK_SET_RATE_PARENT, 0),
 };
 
 static const struct samsung_mux_clock exynos5420_mux_clks[] __initconst = {
@@ -633,7 +633,7 @@ static const struct samsung_div_clock exynos5420_div_clks[] __initconst = {
 
 static const struct samsung_gate_clock exynos5420_gate_clks[] __initconst = {
 	GATE(CLK_MAU_EPLL, "mau_epll", "mout_mau_epll_clk",
-			SRC_MASK_TOP7, 20, 0, 0),
+			SRC_MASK_TOP7, 20, CLK_SET_RATE_PARENT, 0),
 };
 
 static const struct samsung_mux_clock exynos5x_mux_clks[] __initconst = {
@@ -713,7 +713,8 @@ static const struct samsung_mux_clock exynos5x_mux_clks[] __initconst = {
 	MUX(0, "mout_sclk_spll", mout_spll_p, SRC_TOP6, 8, 1),
 	MUX(0, "mout_sclk_ipll", mout_ipll_p, SRC_TOP6, 12, 1),
 	MUX(0, "mout_sclk_rpll", mout_rpll_p, SRC_TOP6, 16, 1),
-	MUX(CLK_MOUT_EPLL, "mout_sclk_epll", mout_epll_p, SRC_TOP6, 20, 1),
+	MUX_F(CLK_MOUT_EPLL, "mout_sclk_epll", mout_epll_p, SRC_TOP6, 20, 1,
+			CLK_SET_RATE_PARENT, 0),
 	MUX(0, "mout_sclk_dpll", mout_dpll_p, SRC_TOP6, 24, 1),
 	MUX(0, "mout_sclk_cpll", mout_cpll_p, SRC_TOP6, 28, 1),
 
-- 
cgit v1.2.3


From 7e784240bd37f7a963f2a61bd9b85f567150fa58 Mon Sep 17 00:00:00 2001
From: Jonathan Liu <net147@gmail.com>
Date: Tue, 8 Aug 2017 11:25:40 +1000
Subject: dt-bindings: clock: sunxi-ccu: Add compatibles for sun5i CCU driver

The bindings were not updated when the sun5i CCU driver was added in
commit 5e73761786d6 ("clk: sunxi-ng: Add sun5i CCU driver").

Signed-off-by: Jonathan Liu <net147@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---
 Documentation/devicetree/bindings/clock/sunxi-ccu.txt | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/Documentation/devicetree/bindings/clock/sunxi-ccu.txt b/Documentation/devicetree/bindings/clock/sunxi-ccu.txt
index df9fad58facd..dbe0c1c58ab5 100644
--- a/Documentation/devicetree/bindings/clock/sunxi-ccu.txt
+++ b/Documentation/devicetree/bindings/clock/sunxi-ccu.txt
@@ -3,6 +3,8 @@ Allwinner Clock Control Unit Binding
 
 Required properties :
 - compatible: must contain one of the following compatibles:
+		- "allwinner,sun5i-a10s-ccu"
+		- "allwinner,sun5i-a13-ccu"
 		- "allwinner,sun6i-a31-ccu"
 		- "allwinner,sun8i-a23-ccu"
 		- "allwinner,sun8i-a33-ccu"
@@ -15,6 +17,7 @@ Required properties :
 		- "allwinner,sun50i-a64-ccu"
 		- "allwinner,sun50i-a64-r-ccu"
 		- "allwinner,sun50i-h5-ccu"
+		- "nextthing,gr8-ccu"
 
 - reg: Must contain the registers base address and length
 - clocks: phandle to the oscillators feeding the CCU. Two are needed:
-- 
cgit v1.2.3


From 721353c030a0d6f7b5e157dc2531da96b4dd73f3 Mon Sep 17 00:00:00 2001
From: Priit Laes <plaes@plaes.org>
Date: Sat, 12 Aug 2017 20:43:50 +0800
Subject: clk: sunxi-ng: div: Add support for fixed post-divider

SATA clock on sun4i/sun7i is of type (parent) / M / 6 where
6 is fixed post-divider.

Signed-off-by: Priit Laes <plaes@plaes.org>
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---
 drivers/clk/sunxi-ng/ccu_div.c | 22 +++++++++++++++++++---
 drivers/clk/sunxi-ng/ccu_div.h |  3 ++-
 2 files changed, 21 insertions(+), 4 deletions(-)

diff --git a/drivers/clk/sunxi-ng/ccu_div.c b/drivers/clk/sunxi-ng/ccu_div.c
index c0e5c10d0091..baa3cf96507b 100644
--- a/drivers/clk/sunxi-ng/ccu_div.c
+++ b/drivers/clk/sunxi-ng/ccu_div.c
@@ -21,10 +21,18 @@ static unsigned long ccu_div_round_rate(struct ccu_mux_internal *mux,
 {
 	struct ccu_div *cd = data;
 
-	return divider_round_rate_parent(&cd->common.hw, parent,
+	if (cd->common.features & CCU_FEATURE_FIXED_POSTDIV)
+		rate *= cd->fixed_post_div;
+
+	rate = divider_round_rate_parent(&cd->common.hw, parent,
 					 rate, parent_rate,
 					 cd->div.table, cd->div.width,
 					 cd->div.flags);
+
+	if (cd->common.features & CCU_FEATURE_FIXED_POSTDIV)
+		rate /= cd->fixed_post_div;
+
+	return rate;
 }
 
 static void ccu_div_disable(struct clk_hw *hw)
@@ -62,8 +70,13 @@ static unsigned long ccu_div_recalc_rate(struct clk_hw *hw,
 	parent_rate = ccu_mux_helper_apply_prediv(&cd->common, &cd->mux, -1,
 						  parent_rate);
 
-	return divider_recalc_rate(hw, parent_rate, val, cd->div.table,
-				   cd->div.flags);
+	val = divider_recalc_rate(hw, parent_rate, val, cd->div.table,
+				  cd->div.flags);
+
+	if (cd->common.features & CCU_FEATURE_FIXED_POSTDIV)
+		val /= cd->fixed_post_div;
+
+	return val;
 }
 
 static int ccu_div_determine_rate(struct clk_hw *hw,
@@ -86,6 +99,9 @@ static int ccu_div_set_rate(struct clk_hw *hw, unsigned long rate,
 	parent_rate = ccu_mux_helper_apply_prediv(&cd->common, &cd->mux, -1,
 						  parent_rate);
 
+	if (cd->common.features & CCU_FEATURE_FIXED_POSTDIV)
+		rate *= cd->fixed_post_div;
+
 	val = divider_get_val(rate, parent_rate, cd->div.table, cd->div.width,
 			      cd->div.flags);
 
diff --git a/drivers/clk/sunxi-ng/ccu_div.h b/drivers/clk/sunxi-ng/ccu_div.h
index 08d074451204..f3a5028dcd14 100644
--- a/drivers/clk/sunxi-ng/ccu_div.h
+++ b/drivers/clk/sunxi-ng/ccu_div.h
@@ -86,9 +86,10 @@ struct ccu_div_internal {
 struct ccu_div {
 	u32			enable;
 
-	struct ccu_div_internal		div;
+	struct ccu_div_internal	div;
 	struct ccu_mux_internal	mux;
 	struct ccu_common	common;
+	unsigned int		fixed_post_div;
 };
 
 #define SUNXI_CCU_DIV_TABLE_WITH_GATE(_struct, _name, _parent, _reg,	\
-- 
cgit v1.2.3


From a6653773d6e5f077bdc6cdd2c57cecdcb908d035 Mon Sep 17 00:00:00 2001
From: Icenowy Zheng <icenowy@aosc.io>
Date: Sat, 12 Aug 2017 20:43:51 +0800
Subject: clk: sunxi-ng: nkm: add support for fixed post-divider

SATA PLL on Allwinner R40 is of type (parent) * N * K / M / 6 where 6 is
the fixed post-divider.

Add post-divider support for NKM type clock.

Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
[wens@csie.org: Fixed application of post-divider in set_rate callback]
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---
 drivers/clk/sunxi-ng/ccu_nkm.c | 22 +++++++++++++++++++---
 drivers/clk/sunxi-ng/ccu_nkm.h |  2 ++
 2 files changed, 21 insertions(+), 3 deletions(-)

diff --git a/drivers/clk/sunxi-ng/ccu_nkm.c b/drivers/clk/sunxi-ng/ccu_nkm.c
index 44b16dc8fea6..841840e35e61 100644
--- a/drivers/clk/sunxi-ng/ccu_nkm.c
+++ b/drivers/clk/sunxi-ng/ccu_nkm.c
@@ -75,7 +75,7 @@ static unsigned long ccu_nkm_recalc_rate(struct clk_hw *hw,
 					unsigned long parent_rate)
 {
 	struct ccu_nkm *nkm = hw_to_ccu_nkm(hw);
-	unsigned long n, m, k;
+	unsigned long n, m, k, rate;
 	u32 reg;
 
 	reg = readl(nkm->common.base + nkm->common.reg);
@@ -98,7 +98,12 @@ static unsigned long ccu_nkm_recalc_rate(struct clk_hw *hw,
 	if (!m)
 		m++;
 
-	return parent_rate * n  * k / m;
+	rate = parent_rate * n  * k / m;
+
+	if (nkm->common.features & CCU_FEATURE_FIXED_POSTDIV)
+		rate /= nkm->fixed_post_div;
+
+	return rate;
 }
 
 static unsigned long ccu_nkm_round_rate(struct ccu_mux_internal *mux,
@@ -117,9 +122,17 @@ static unsigned long ccu_nkm_round_rate(struct ccu_mux_internal *mux,
 	_nkm.min_m = 1;
 	_nkm.max_m = nkm->m.max ?: 1 << nkm->m.width;
 
+	if (nkm->common.features & CCU_FEATURE_FIXED_POSTDIV)
+		rate *= nkm->fixed_post_div;
+
 	ccu_nkm_find_best(*parent_rate, rate, &_nkm);
 
-	return *parent_rate * _nkm.n * _nkm.k / _nkm.m;
+	rate = *parent_rate * _nkm.n * _nkm.k / _nkm.m;
+
+	if (nkm->common.features & CCU_FEATURE_FIXED_POSTDIV)
+		rate /= nkm->fixed_post_div;
+
+	return rate;
 }
 
 static int ccu_nkm_determine_rate(struct clk_hw *hw,
@@ -139,6 +152,9 @@ static int ccu_nkm_set_rate(struct clk_hw *hw, unsigned long rate,
 	unsigned long flags;
 	u32 reg;
 
+	if (nkm->common.features & CCU_FEATURE_FIXED_POSTDIV)
+		rate *= nkm->fixed_post_div;
+
 	_nkm.min_n = nkm->n.min ?: 1;
 	_nkm.max_n = nkm->n.max ?: 1 << nkm->n.width;
 	_nkm.min_k = nkm->k.min ?: 1;
diff --git a/drivers/clk/sunxi-ng/ccu_nkm.h b/drivers/clk/sunxi-ng/ccu_nkm.h
index 34580894f4d1..cc6efb70a102 100644
--- a/drivers/clk/sunxi-ng/ccu_nkm.h
+++ b/drivers/clk/sunxi-ng/ccu_nkm.h
@@ -34,6 +34,8 @@ struct ccu_nkm {
 	struct ccu_div_internal		m;
 	struct ccu_mux_internal	mux;
 
+	unsigned int		fixed_post_div;
+
 	struct ccu_common	common;
 };
 
-- 
cgit v1.2.3


From 714c53aa2e2d6d60ca1e7d18980767c8b715c288 Mon Sep 17 00:00:00 2001
From: Geert Uytterhoeven <geert+renesas@glider.be>
Date: Tue, 11 Jul 2017 16:58:42 +0200
Subject: clk: renesas: Add r8a77995 CPG Core Clock Definitions

Add all R-Car D3 Clock Pulse Generator Core Clock Outputs, as listed
in Table 8.2f ("List of Clocks [R-Car D3]") of the R-Car Series, 3rd
Generation Hardware User's Manual (Rev. 0.55, Jun. 30, 2017).

Note that internal CPG clocks (S0, S1, S2, S3, S1C, S3C, SDSRC, and
SSPSRC) are not included, as they are used as internal clock sources
only, and never referenced from DT.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
---
 include/dt-bindings/clock/r8a77995-cpg-mssr.h | 57 +++++++++++++++++++++++++++
 1 file changed, 57 insertions(+)
 create mode 100644 include/dt-bindings/clock/r8a77995-cpg-mssr.h

diff --git a/include/dt-bindings/clock/r8a77995-cpg-mssr.h b/include/dt-bindings/clock/r8a77995-cpg-mssr.h
new file mode 100644
index 000000000000..4e8ae3dee590
--- /dev/null
+++ b/include/dt-bindings/clock/r8a77995-cpg-mssr.h
@@ -0,0 +1,57 @@
+/*
+ * Copyright (C) 2017 Glider bvba
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#ifndef __DT_BINDINGS_CLOCK_R8A77995_CPG_MSSR_H__
+#define __DT_BINDINGS_CLOCK_R8A77995_CPG_MSSR_H__
+
+#include <dt-bindings/clock/renesas-cpg-mssr.h>
+
+/* r8a77995 CPG Core Clocks */
+#define R8A77995_CLK_Z2			0
+#define R8A77995_CLK_ZG			1
+#define R8A77995_CLK_ZTR		2
+#define R8A77995_CLK_ZT			3
+#define R8A77995_CLK_ZX			4
+#define R8A77995_CLK_S0D1		5
+#define R8A77995_CLK_S1D1		6
+#define R8A77995_CLK_S1D2		7
+#define R8A77995_CLK_S1D4		8
+#define R8A77995_CLK_S2D1		9
+#define R8A77995_CLK_S2D2		10
+#define R8A77995_CLK_S2D4		11
+#define R8A77995_CLK_S3D1		12
+#define R8A77995_CLK_S3D2		13
+#define R8A77995_CLK_S3D4		14
+#define R8A77995_CLK_S1D4C		15
+#define R8A77995_CLK_S3D1C		16
+#define R8A77995_CLK_S3D2C		17
+#define R8A77995_CLK_S3D4C		18
+#define R8A77995_CLK_LB			19
+#define R8A77995_CLK_CL			20
+#define R8A77995_CLK_ZB3		21
+#define R8A77995_CLK_ZB3D2		22
+#define R8A77995_CLK_CR			23
+#define R8A77995_CLK_CRD2		24
+#define R8A77995_CLK_SD0H		25
+#define R8A77995_CLK_SD0		26
+#define R8A77995_CLK_SSP2		27
+#define R8A77995_CLK_SSP1		28
+#define R8A77995_CLK_RPC		29
+#define R8A77995_CLK_RPCD2		30
+#define R8A77995_CLK_ZA2		31
+#define R8A77995_CLK_ZA8		32
+#define R8A77995_CLK_Z2D		33
+#define R8A77995_CLK_CANFD		34
+#define R8A77995_CLK_MSO		35
+#define R8A77995_CLK_R			36
+#define R8A77995_CLK_OSC		37
+#define R8A77995_CLK_LV0		38
+#define R8A77995_CLK_LV1		39
+#define R8A77995_CLK_CP			40
+
+#endif /* __DT_BINDINGS_CLOCK_R8A77995_CPG_MSSR_H__ */
-- 
cgit v1.2.3


From 09a7dea9d58aadda90af5ad4dce1d540fe830868 Mon Sep 17 00:00:00 2001
From: Geert Uytterhoeven <geert+renesas@glider.be>
Date: Wed, 19 Jul 2017 16:30:45 +0200
Subject: clk: renesas: rcar-gen3: Add divider support for PLL1 and PLL3

On some R-Car Gen3 SoCs (e.g. R-Car D3), PLL1 and PLL3 use a divider
value different from one.  Extend struct rcar_gen3_cpg_pll_config to handle
this.  As all multipliers and dividers are small, table size increase
can be kept limited by storing them in u8s instead of unsigned ints,
which saves ca. 0.5 KiB for a generic kernel.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
---
 drivers/clk/renesas/r8a7795-cpg-mssr.c | 34 +++++++++++++++++-----------------
 drivers/clk/renesas/r8a7796-cpg-mssr.c | 34 +++++++++++++++++-----------------
 drivers/clk/renesas/rcar-gen3-cpg.c    |  2 ++
 drivers/clk/renesas/rcar-gen3-cpg.h    |  8 +++++---
 4 files changed, 41 insertions(+), 37 deletions(-)

diff --git a/drivers/clk/renesas/r8a7795-cpg-mssr.c b/drivers/clk/renesas/r8a7795-cpg-mssr.c
index c091a8e024b8..762b2f8824f1 100644
--- a/drivers/clk/renesas/r8a7795-cpg-mssr.c
+++ b/drivers/clk/renesas/r8a7795-cpg-mssr.c
@@ -305,23 +305,23 @@ static const unsigned int r8a7795_crit_mod_clks[] __initconst = {
 					 (((md) & BIT(17)) >> 17))
 
 static const struct rcar_gen3_cpg_pll_config cpg_pll_configs[16] __initconst = {
-	/* EXTAL div	PLL1 mult	PLL3 mult */
-	{ 1,		192,		192,	},
-	{ 1,		192,		128,	},
-	{ 0, /* Prohibited setting */		},
-	{ 1,		192,		192,	},
-	{ 1,		160,		160,	},
-	{ 1,		160,		106,	},
-	{ 0, /* Prohibited setting */		},
-	{ 1,		160,		160,	},
-	{ 1,		128,		128,	},
-	{ 1,		128,		84,	},
-	{ 0, /* Prohibited setting */		},
-	{ 1,		128,		128,	},
-	{ 2,		192,		192,	},
-	{ 2,		192,		128,	},
-	{ 0, /* Prohibited setting */		},
-	{ 2,		192,		192,	},
+	/* EXTAL div	PLL1 mult/div	PLL3 mult/div */
+	{ 1,		192,	1,	192,	1,	},
+	{ 1,		192,	1,	128,	1,	},
+	{ 0, /* Prohibited setting */			},
+	{ 1,		192,	1,	192,	1,	},
+	{ 1,		160,	1,	160,	1,	},
+	{ 1,		160,	1,	106,	1,	},
+	{ 0, /* Prohibited setting */			},
+	{ 1,		160,	1,	160,	1,	},
+	{ 1,		128,	1,	128,	1,	},
+	{ 1,		128,	1,	84,	1,	},
+	{ 0, /* Prohibited setting */			},
+	{ 1,		128,	1,	128,	1,	},
+	{ 2,		192,	1,	192,	1,	},
+	{ 2,		192,	1,	128,	1,	},
+	{ 0, /* Prohibited setting */			},
+	{ 2,		192,	1,	192,	1,	},
 };
 
 static const struct soc_device_attribute r8a7795es1[] __initconst = {
diff --git a/drivers/clk/renesas/r8a7796-cpg-mssr.c b/drivers/clk/renesas/r8a7796-cpg-mssr.c
index acc6d0f153e1..22ba3c497aba 100644
--- a/drivers/clk/renesas/r8a7796-cpg-mssr.c
+++ b/drivers/clk/renesas/r8a7796-cpg-mssr.c
@@ -277,23 +277,23 @@ static const unsigned int r8a7796_crit_mod_clks[] __initconst = {
 					 (((md) & BIT(17)) >> 17))
 
 static const struct rcar_gen3_cpg_pll_config cpg_pll_configs[16] __initconst = {
-	/* EXTAL div	PLL1 mult	PLL3 mult */
-	{ 1,		192,		192,	},
-	{ 1,		192,		128,	},
-	{ 0, /* Prohibited setting */		},
-	{ 1,		192,		192,	},
-	{ 1,		160,		160,	},
-	{ 1,		160,		106,	},
-	{ 0, /* Prohibited setting */		},
-	{ 1,		160,		160,	},
-	{ 1,		128,		128,	},
-	{ 1,		128,		84,	},
-	{ 0, /* Prohibited setting */		},
-	{ 1,		128,		128,	},
-	{ 2,		192,		192,	},
-	{ 2,		192,		128,	},
-	{ 0, /* Prohibited setting */		},
-	{ 2,		192,		192,	},
+	/* EXTAL div	PLL1 mult/div	PLL3 mult/div */
+	{ 1,		192,	1,	192,	1,	},
+	{ 1,		192,	1,	128,	1,	},
+	{ 0, /* Prohibited setting */			},
+	{ 1,		192,	1,	192,	1,	},
+	{ 1,		160,	1,	160,	1,	},
+	{ 1,		160,	1,	106,	1,	},
+	{ 0, /* Prohibited setting */			},
+	{ 1,		160,	1,	160,	1,	},
+	{ 1,		128,	1,	128,	1,	},
+	{ 1,		128,	1,	84,	1,	},
+	{ 0, /* Prohibited setting */			},
+	{ 1,		128,	1,	128,	1,	},
+	{ 2,		192,	1,	192,	1,	},
+	{ 2,		192,	1,	128,	1,	},
+	{ 0, /* Prohibited setting */			},
+	{ 2,		192,	1,	192,	1,	},
 };
 
 static int __init r8a7796_cpg_mssr_init(struct device *dev)
diff --git a/drivers/clk/renesas/rcar-gen3-cpg.c b/drivers/clk/renesas/rcar-gen3-cpg.c
index d4d27cf6110d..3f922fea9671 100644
--- a/drivers/clk/renesas/rcar-gen3-cpg.c
+++ b/drivers/clk/renesas/rcar-gen3-cpg.c
@@ -296,6 +296,7 @@ struct clk * __init rcar_gen3_cpg_clk_register(struct device *dev,
 
 	case CLK_TYPE_GEN3_PLL1:
 		mult = cpg_pll_config->pll1_mult;
+		div = cpg_pll_config->pll1_div;
 		break;
 
 	case CLK_TYPE_GEN3_PLL2:
@@ -313,6 +314,7 @@ struct clk * __init rcar_gen3_cpg_clk_register(struct device *dev,
 
 	case CLK_TYPE_GEN3_PLL3:
 		mult = cpg_pll_config->pll3_mult;
+		div = cpg_pll_config->pll3_div;
 		break;
 
 	case CLK_TYPE_GEN3_PLL4:
diff --git a/drivers/clk/renesas/rcar-gen3-cpg.h b/drivers/clk/renesas/rcar-gen3-cpg.h
index 073be54b5d03..4eaf02955580 100644
--- a/drivers/clk/renesas/rcar-gen3-cpg.h
+++ b/drivers/clk/renesas/rcar-gen3-cpg.h
@@ -26,9 +26,11 @@ enum rcar_gen3_clk_types {
 	DEF_BASE(_name, _id, CLK_TYPE_GEN3_SD, _parent, .offset = _offset)
 
 struct rcar_gen3_cpg_pll_config {
-	unsigned int extal_div;
-	unsigned int pll1_mult;
-	unsigned int pll3_mult;
+	u8 extal_div;
+	u8 pll1_mult;
+	u8 pll1_div;
+	u8 pll3_mult;
+	u8 pll3_div;
 };
 
 #define CPG_RCKCR	0x240
-- 
cgit v1.2.3


From 696997e004d4179f462d2ebd3efeb12a7cec5ef7 Mon Sep 17 00:00:00 2001
From: Geert Uytterhoeven <geert+renesas@glider.be>
Date: Wed, 19 Jul 2017 17:39:54 +0200
Subject: clk: renesas: rcar-gen3: Add support for SCCG/Clean peripheral clocks

On R-Car Gen3 SoCs with a Spread Spectrum Clock Generator (e.g. R-Car
D3), a peripheral clock divider has been added, to select between clean
and spread spectrum parents.

Add a new clock type to the R-Car Gen3 driver core to handle this.
To avoid increasing the size of struct cpg_core_clk, both parents and
dividers are stored in the existing parent resp. div fields.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
---
 drivers/clk/renesas/rcar-gen3-cpg.c | 20 +++++++++++++++++++-
 drivers/clk/renesas/rcar-gen3-cpg.h |  7 +++++++
 2 files changed, 26 insertions(+), 1 deletion(-)

diff --git a/drivers/clk/renesas/rcar-gen3-cpg.c b/drivers/clk/renesas/rcar-gen3-cpg.c
index 3f922fea9671..951105816547 100644
--- a/drivers/clk/renesas/rcar-gen3-cpg.c
+++ b/drivers/clk/renesas/rcar-gen3-cpg.c
@@ -272,7 +272,7 @@ struct clk * __init rcar_gen3_cpg_clk_register(struct device *dev,
 	unsigned int div = 1;
 	u32 value;
 
-	parent = clks[core->parent];
+	parent = clks[core->parent & 0xffff];	/* CLK_TYPE_PE uses high bits */
 	if (IS_ERR(parent))
 		return ERR_CAST(parent);
 
@@ -355,6 +355,24 @@ struct clk * __init rcar_gen3_cpg_clk_register(struct device *dev,
 			parent = clks[cpg_clk_extalr];
 		break;
 
+	case CLK_TYPE_GEN3_PE:
+		/*
+		 * Peripheral clock with a fixed divider, selectable between
+		 * clean and spread spectrum parents using MD12
+		 */
+		if (cpg_mode & BIT(12)) {
+			/* Clean */
+			div = core->div & 0xffff;
+		} else {
+			/* SCCG */
+			parent = clks[core->parent >> 16];
+			if (IS_ERR(parent))
+				return ERR_CAST(parent);
+			div = core->div >> 16;
+		}
+		mult = 1;
+		break;
+
 	default:
 		return ERR_PTR(-EINVAL);
 	}
diff --git a/drivers/clk/renesas/rcar-gen3-cpg.h b/drivers/clk/renesas/rcar-gen3-cpg.h
index 4eaf02955580..d756ef8b78eb 100644
--- a/drivers/clk/renesas/rcar-gen3-cpg.h
+++ b/drivers/clk/renesas/rcar-gen3-cpg.h
@@ -20,11 +20,18 @@ enum rcar_gen3_clk_types {
 	CLK_TYPE_GEN3_PLL4,
 	CLK_TYPE_GEN3_SD,
 	CLK_TYPE_GEN3_R,
+	CLK_TYPE_GEN3_PE,
 };
 
 #define DEF_GEN3_SD(_name, _id, _parent, _offset)	\
 	DEF_BASE(_name, _id, CLK_TYPE_GEN3_SD, _parent, .offset = _offset)
 
+#define DEF_GEN3_PE(_name, _id, _parent_sscg, _div_sscg, _parent_clean, \
+		    _div_clean) \
+	DEF_BASE(_name, _id, CLK_TYPE_GEN3_PE,			\
+		 (_parent_sscg) << 16 | (_parent_clean),	\
+		 .div = (_div_sscg) << 16 | (_div_clean))
+
 struct rcar_gen3_cpg_pll_config {
 	u8 extal_div;
 	u8 pll1_mult;
-- 
cgit v1.2.3


From d71e851d82c6cfe58bc592ce1e59e924f0374d0f Mon Sep 17 00:00:00 2001
From: Geert Uytterhoeven <geert+renesas@glider.be>
Date: Wed, 12 Jul 2017 10:47:36 +0200
Subject: clk: renesas: cpg-mssr: Add R8A77995 support

Add R-Car D3 (R8A77995) Clock Pulse Generator / Module Standby and
Software Reset support, using the CPG/MSSR driver core and the common
R-Car Gen3 CPG code.

Based on the R-Car Series, 3rd Generation Hardware User's Manual, Rev.
0.55, Jun. 30, 2017.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
Acked-by: Rob Herring <robh@kernel.org>
---
 .../devicetree/bindings/clock/renesas,cpg-mssr.txt |   3 +-
 drivers/clk/renesas/Kconfig                        |   5 +
 drivers/clk/renesas/Makefile                       |   1 +
 drivers/clk/renesas/r8a77995-cpg-mssr.c            | 236 +++++++++++++++++++++
 drivers/clk/renesas/renesas-cpg-mssr.c             |   6 +
 drivers/clk/renesas/renesas-cpg-mssr.h             |   1 +
 6 files changed, 251 insertions(+), 1 deletion(-)
 create mode 100644 drivers/clk/renesas/r8a77995-cpg-mssr.c

diff --git a/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt b/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt
index 0cd894f987a3..27cec3258538 100644
--- a/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt
+++ b/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt
@@ -22,6 +22,7 @@ Required Properties:
       - "renesas,r8a7794-cpg-mssr" for the r8a7794 SoC (R-Car E2)
       - "renesas,r8a7795-cpg-mssr" for the r8a7795 SoC (R-Car H3)
       - "renesas,r8a7796-cpg-mssr" for the r8a7796 SoC (R-Car M3-W)
+      - "renesas,r8a77995-cpg-mssr" for the r8a77995 SoC (R-Car D3)
 
   - reg: Base address and length of the memory resource used by the CPG/MSSR
     block
@@ -30,7 +31,7 @@ Required Properties:
     clock-names
   - clock-names: List of external parent clock names. Valid names are:
       - "extal" (r8a7743, r8a7745, r8a7790, r8a7791, r8a7792, r8a7793, r8a7794,
-		 r8a7795, r8a7796)
+		 r8a7795, r8a7796, r8a77995)
       - "extalr" (r8a7795, r8a7796)
       - "usb_extal" (r8a7743, r8a7745, r8a7790, r8a7791, r8a7793, r8a7794)
 
diff --git a/drivers/clk/renesas/Kconfig b/drivers/clk/renesas/Kconfig
index 85526ca39202..eee076deb739 100644
--- a/drivers/clk/renesas/Kconfig
+++ b/drivers/clk/renesas/Kconfig
@@ -15,6 +15,7 @@ config CLK_RENESAS
 	select CLK_R8A7794 if ARCH_R8A7794
 	select CLK_R8A7795 if ARCH_R8A7795
 	select CLK_R8A7796 if ARCH_R8A7796
+	select CLK_R8A77995 if ARCH_R8A77995
 	select CLK_SH73A0 if ARCH_SH73A0
 
 if CLK_RENESAS
@@ -94,6 +95,10 @@ config CLK_R8A7796
 	bool "R-Car M3-W clock support" if COMPILE_TEST
 	select CLK_RCAR_GEN3_CPG
 
+config CLK_R8A77995
+	bool "R-Car D3 clock support" if COMPILE_TEST
+	select CLK_RCAR_GEN3_CPG
+
 config CLK_SH73A0
 	bool "SH-Mobile AG5 clock support" if COMPILE_TEST
 	select CLK_RENESAS_CPG_MSTP
diff --git a/drivers/clk/renesas/Makefile b/drivers/clk/renesas/Makefile
index 02d04124371f..a3bb1fadf1a6 100644
--- a/drivers/clk/renesas/Makefile
+++ b/drivers/clk/renesas/Makefile
@@ -13,6 +13,7 @@ obj-$(CONFIG_CLK_R8A7792)		+= r8a7792-cpg-mssr.o
 obj-$(CONFIG_CLK_R8A7794)		+= r8a7794-cpg-mssr.o
 obj-$(CONFIG_CLK_R8A7795)		+= r8a7795-cpg-mssr.o
 obj-$(CONFIG_CLK_R8A7796)		+= r8a7796-cpg-mssr.o
+obj-$(CONFIG_CLK_R8A77995)		+= r8a77995-cpg-mssr.o
 obj-$(CONFIG_CLK_SH73A0)		+= clk-sh73a0.o
 
 # Family
diff --git a/drivers/clk/renesas/r8a77995-cpg-mssr.c b/drivers/clk/renesas/r8a77995-cpg-mssr.c
new file mode 100644
index 000000000000..e594cf8ee63b
--- /dev/null
+++ b/drivers/clk/renesas/r8a77995-cpg-mssr.c
@@ -0,0 +1,236 @@
+/*
+ * r8a77995 Clock Pulse Generator / Module Standby and Software Reset
+ *
+ * Copyright (C) 2017 Glider bvba
+ *
+ * Based on r8a7795-cpg-mssr.c
+ *
+ * Copyright (C) 2015 Glider bvba
+ * Copyright (C) 2015 Renesas Electronics Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ */
+
+#include <linux/device.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/soc/renesas/rcar-rst.h>
+
+#include <dt-bindings/clock/r8a77995-cpg-mssr.h>
+
+#include "renesas-cpg-mssr.h"
+#include "rcar-gen3-cpg.h"
+
+enum clk_ids {
+	/* Core Clock Outputs exported to DT */
+	LAST_DT_CORE_CLK = R8A77995_CLK_CP,
+
+	/* External Input Clocks */
+	CLK_EXTAL,
+
+	/* Internal Core Clocks */
+	CLK_MAIN,
+	CLK_PLL0,
+	CLK_PLL1,
+	CLK_PLL3,
+	CLK_PLL0D2,
+	CLK_PLL0D3,
+	CLK_PLL0D5,
+	CLK_PLL1D2,
+	CLK_PE,
+	CLK_S0,
+	CLK_S1,
+	CLK_S2,
+	CLK_S3,
+	CLK_SDSRC,
+	CLK_SSPSRC,
+
+	/* Module Clocks */
+	MOD_CLK_BASE
+};
+
+static const struct cpg_core_clk r8a77995_core_clks[] __initconst = {
+	/* External Clock Inputs */
+	DEF_INPUT("extal",     CLK_EXTAL),
+
+	/* Internal Core Clocks */
+	DEF_BASE(".main",      CLK_MAIN, CLK_TYPE_GEN3_MAIN,       CLK_EXTAL),
+	DEF_BASE(".pll1",      CLK_PLL1, CLK_TYPE_GEN3_PLL1,       CLK_MAIN),
+	DEF_BASE(".pll3",      CLK_PLL3, CLK_TYPE_GEN3_PLL3,       CLK_MAIN),
+
+	DEF_FIXED(".pll0",     CLK_PLL0,           CLK_MAIN,	   4, 250),
+	DEF_FIXED(".pll0d2",   CLK_PLL0D2,         CLK_PLL0,       2, 1),
+	DEF_FIXED(".pll0d3",   CLK_PLL0D3,         CLK_PLL0,       3, 1),
+	DEF_FIXED(".pll0d5",   CLK_PLL0D5,         CLK_PLL0,       5, 1),
+	DEF_FIXED(".pll1d2",   CLK_PLL1D2,         CLK_PLL1,       2, 1),
+	DEF_FIXED(".pe",       CLK_PE,             CLK_PLL0D3,     4, 1),
+	DEF_FIXED(".s0",       CLK_S0,             CLK_PLL1,       2, 1),
+	DEF_FIXED(".s1",       CLK_S1,             CLK_PLL1,       3, 1),
+	DEF_FIXED(".s2",       CLK_S2,             CLK_PLL1,       4, 1),
+	DEF_FIXED(".s3",       CLK_S3,             CLK_PLL1,       6, 1),
+	DEF_FIXED(".sdsrc",    CLK_SDSRC,          CLK_PLL1,       2, 1),
+
+	/* Core Clock Outputs */
+	DEF_FIXED("z2",        R8A77995_CLK_Z2,    CLK_PLL0D3,     1, 1),
+	DEF_FIXED("ztr",       R8A77995_CLK_ZTR,   CLK_PLL1,       6, 1),
+	DEF_FIXED("zt",        R8A77995_CLK_ZT,    CLK_PLL1,       4, 1),
+	DEF_FIXED("zx",        R8A77995_CLK_ZX,    CLK_PLL1,       3, 1),
+	DEF_FIXED("s0d1",      R8A77995_CLK_S0D1,  CLK_S0,         1, 1),
+	DEF_FIXED("s1d1",      R8A77995_CLK_S1D1,  CLK_S1,         1, 1),
+	DEF_FIXED("s1d2",      R8A77995_CLK_S1D2,  CLK_S1,         2, 1),
+	DEF_FIXED("s1d4",      R8A77995_CLK_S1D4,  CLK_S1,         4, 1),
+	DEF_FIXED("s2d1",      R8A77995_CLK_S2D1,  CLK_S2,         1, 1),
+	DEF_FIXED("s2d2",      R8A77995_CLK_S2D2,  CLK_S2,         2, 1),
+	DEF_FIXED("s2d4",      R8A77995_CLK_S2D4,  CLK_S2,         4, 1),
+	DEF_FIXED("s3d1",      R8A77995_CLK_S3D1,  CLK_S3,         1, 1),
+	DEF_FIXED("s3d2",      R8A77995_CLK_S3D2,  CLK_S3,         2, 1),
+	DEF_FIXED("s3d4",      R8A77995_CLK_S3D4,  CLK_S3,         4, 1),
+
+	DEF_FIXED("cl",        R8A77995_CLK_CL,    CLK_PLL1,      48, 1),
+	DEF_FIXED("cp",        R8A77995_CLK_CP,    CLK_EXTAL,      2, 1),
+	DEF_FIXED("osc",       R8A77995_CLK_OSC,   CLK_EXTAL,    384, 1),
+	DEF_FIXED("r",         R8A77995_CLK_R,     CLK_EXTAL,   1536, 1),
+
+	DEF_GEN3_PE("s1d4c",   R8A77995_CLK_S1D4C, CLK_S1, 4, CLK_PE, 2),
+	DEF_GEN3_PE("s3d1c",   R8A77995_CLK_S3D1C, CLK_S3, 1, CLK_PE, 1),
+	DEF_GEN3_PE("s3d2c",   R8A77995_CLK_S3D2C, CLK_S3, 2, CLK_PE, 2),
+	DEF_GEN3_PE("s3d4c",   R8A77995_CLK_S3D4C, CLK_S3, 4, CLK_PE, 4),
+
+	DEF_GEN3_SD("sd0",     R8A77995_CLK_SD0,   CLK_SDSRC,     0x268),
+
+	DEF_DIV6P1("canfd",    R8A77995_CLK_CANFD, CLK_PLL0D3,    0x244),
+	DEF_DIV6P1("mso",      R8A77995_CLK_MSO,   CLK_PLL1D2,    0x014),
+};
+
+static const struct mssr_mod_clk r8a77995_mod_clks[] __initconst = {
+	DEF_MOD("scif5",		 202,	R8A77995_CLK_S3D4C),
+	DEF_MOD("scif4",		 203,	R8A77995_CLK_S3D4C),
+	DEF_MOD("scif3",		 204,	R8A77995_CLK_S3D4C),
+	DEF_MOD("scif1",		 206,	R8A77995_CLK_S3D4C),
+	DEF_MOD("scif0",		 207,	R8A77995_CLK_S3D4C),
+	DEF_MOD("msiof3",		 208,	R8A77995_CLK_MSO),
+	DEF_MOD("msiof2",		 209,	R8A77995_CLK_MSO),
+	DEF_MOD("msiof1",		 210,	R8A77995_CLK_MSO),
+	DEF_MOD("msiof0",		 211,	R8A77995_CLK_MSO),
+	DEF_MOD("sys-dmac2",		 217,	R8A77995_CLK_S3D1),
+	DEF_MOD("sys-dmac1",		 218,	R8A77995_CLK_S3D1),
+	DEF_MOD("sys-dmac0",		 219,	R8A77995_CLK_S3D1),
+	DEF_MOD("cmt3",			 300,	R8A77995_CLK_R),
+	DEF_MOD("cmt2",			 301,	R8A77995_CLK_R),
+	DEF_MOD("cmt1",			 302,	R8A77995_CLK_R),
+	DEF_MOD("cmt0",			 303,	R8A77995_CLK_R),
+	DEF_MOD("scif2",		 310,	R8A77995_CLK_S3D4C),
+	DEF_MOD("emmc0",		 312,	R8A77995_CLK_SD0),
+	DEF_MOD("usb-dmac0",		 330,	R8A77995_CLK_S3D1),
+	DEF_MOD("usb-dmac1",		 331,	R8A77995_CLK_S3D1),
+	DEF_MOD("rwdt",			 402,	R8A77995_CLK_R),
+	DEF_MOD("intc-ex",		 407,	R8A77995_CLK_CP),
+	DEF_MOD("intc-ap",		 408,	R8A77995_CLK_S3D1),
+	DEF_MOD("audmac0",		 502,	R8A77995_CLK_S3D1),
+	DEF_MOD("hscif3",		 517,	R8A77995_CLK_S3D1C),
+	DEF_MOD("hscif0",		 520,	R8A77995_CLK_S3D1C),
+	DEF_MOD("thermal",		 522,	R8A77995_CLK_CP),
+	DEF_MOD("pwm",			 523,	R8A77995_CLK_S3D4C),
+	DEF_MOD("fcpvd1",		 602,	R8A77995_CLK_S1D2),
+	DEF_MOD("fcpvd0",		 603,	R8A77995_CLK_S1D2),
+	DEF_MOD("fcpvbs",		 607,	R8A77995_CLK_S0D1),
+	DEF_MOD("vspd1",		 622,	R8A77995_CLK_S1D2),
+	DEF_MOD("vspd0",		 623,	R8A77995_CLK_S1D2),
+	DEF_MOD("vspbs",		 627,	R8A77995_CLK_S0D1),
+	DEF_MOD("ehci0",		 703,	R8A77995_CLK_S3D2),
+	DEF_MOD("hsusb",		 704,	R8A77995_CLK_S3D2),
+	DEF_MOD("du1",			 723,	R8A77995_CLK_S2D1),
+	DEF_MOD("du0",			 724,	R8A77995_CLK_S2D1),
+	DEF_MOD("lvds",			 727,	R8A77995_CLK_S2D1),
+	DEF_MOD("vin7",			 804,	R8A77995_CLK_S1D2),
+	DEF_MOD("vin6",			 805,	R8A77995_CLK_S1D2),
+	DEF_MOD("vin5",			 806,	R8A77995_CLK_S1D2),
+	DEF_MOD("vin4",			 807,	R8A77995_CLK_S1D2),
+	DEF_MOD("etheravb",		 812,	R8A77995_CLK_S3D2),
+	DEF_MOD("imr0",			 823,	R8A77995_CLK_S1D2),
+	DEF_MOD("gpio6",		 906,	R8A77995_CLK_S3D4),
+	DEF_MOD("gpio5",		 907,	R8A77995_CLK_S3D4),
+	DEF_MOD("gpio4",		 908,	R8A77995_CLK_S3D4),
+	DEF_MOD("gpio3",		 909,	R8A77995_CLK_S3D4),
+	DEF_MOD("gpio2",		 910,	R8A77995_CLK_S3D4),
+	DEF_MOD("gpio1",		 911,	R8A77995_CLK_S3D4),
+	DEF_MOD("gpio0",		 912,	R8A77995_CLK_S3D4),
+	DEF_MOD("can-fd",		 914,	R8A77995_CLK_S3D2),
+	DEF_MOD("can-if1",		 915,	R8A77995_CLK_S3D4),
+	DEF_MOD("can-if0",		 916,	R8A77995_CLK_S3D4),
+	DEF_MOD("i2c3",			 928,	R8A77995_CLK_S3D2),
+	DEF_MOD("i2c2",			 929,	R8A77995_CLK_S3D2),
+	DEF_MOD("i2c1",			 930,	R8A77995_CLK_S3D2),
+	DEF_MOD("i2c0",			 931,	R8A77995_CLK_S3D2),
+	DEF_MOD("ssi-all",		1005,	R8A77995_CLK_S3D4),
+	DEF_MOD("ssi4",			1011,	MOD_CLK_ID(1005)),
+	DEF_MOD("ssi3",			1012,	MOD_CLK_ID(1005)),
+	DEF_MOD("scu-all",		1017,	R8A77995_CLK_S3D4),
+	DEF_MOD("scu-dvc1",		1018,	MOD_CLK_ID(1017)),
+	DEF_MOD("scu-dvc0",		1019,	MOD_CLK_ID(1017)),
+	DEF_MOD("scu-ctu1-mix1",	1020,	MOD_CLK_ID(1017)),
+	DEF_MOD("scu-ctu0-mix0",	1021,	MOD_CLK_ID(1017)),
+	DEF_MOD("scu-src6",		1025,	MOD_CLK_ID(1017)),
+	DEF_MOD("scu-src5",		1026,	MOD_CLK_ID(1017)),
+};
+
+static const unsigned int r8a77995_crit_mod_clks[] __initconst = {
+	MOD_CLK_ID(408),	/* INTC-AP (GIC) */
+};
+
+
+/*
+ * CPG Clock Data
+ */
+
+/*
+ * MD19		EXTAL (MHz)	PLL0		PLL1		PLL3
+ *--------------------------------------------------------------------
+ * 0		48 x 1		x250/4		x100/3		x100/3
+ * 1		48 x 1		x250/4		x100/3		x116/6
+ */
+#define CPG_PLL_CONFIG_INDEX(md)	(((md) & BIT(19)) >> 19)
+
+static const struct rcar_gen3_cpg_pll_config cpg_pll_configs[2] __initconst = {
+	/* EXTAL div	PLL1 mult/div	PLL3 mult/div */
+	{ 1,		100,	3,	100,	3,	},
+	{ 1,		100,	3,	116,	6,	},
+};
+
+static int __init r8a77995_cpg_mssr_init(struct device *dev)
+{
+	const struct rcar_gen3_cpg_pll_config *cpg_pll_config;
+	u32 cpg_mode;
+	int error;
+
+	error = rcar_rst_read_mode_pins(&cpg_mode);
+	if (error)
+		return error;
+
+	cpg_pll_config = &cpg_pll_configs[CPG_PLL_CONFIG_INDEX(cpg_mode)];
+
+	return rcar_gen3_cpg_init(cpg_pll_config, 0, cpg_mode);
+}
+
+const struct cpg_mssr_info r8a77995_cpg_mssr_info __initconst = {
+	/* Core Clocks */
+	.core_clks = r8a77995_core_clks,
+	.num_core_clks = ARRAY_SIZE(r8a77995_core_clks),
+	.last_dt_core_clk = LAST_DT_CORE_CLK,
+	.num_total_core_clks = MOD_CLK_BASE,
+
+	/* Module Clocks */
+	.mod_clks = r8a77995_mod_clks,
+	.num_mod_clks = ARRAY_SIZE(r8a77995_mod_clks),
+	.num_hw_mod_clks = 12 * 32,
+
+	/* Critical Module Clocks */
+	.crit_mod_clks = r8a77995_crit_mod_clks,
+	.num_crit_mod_clks = ARRAY_SIZE(r8a77995_crit_mod_clks),
+
+	/* Callbacks */
+	.init = r8a77995_cpg_mssr_init,
+	.cpg_clk_register = rcar_gen3_cpg_clk_register,
+};
diff --git a/drivers/clk/renesas/renesas-cpg-mssr.c b/drivers/clk/renesas/renesas-cpg-mssr.c
index 1f607c806f9b..e580a5e6346c 100644
--- a/drivers/clk/renesas/renesas-cpg-mssr.c
+++ b/drivers/clk/renesas/renesas-cpg-mssr.c
@@ -679,6 +679,12 @@ static const struct of_device_id cpg_mssr_match[] = {
 		.compatible = "renesas,r8a7796-cpg-mssr",
 		.data = &r8a7796_cpg_mssr_info,
 	},
+#endif
+#ifdef CONFIG_CLK_R8A77995
+	{
+		.compatible = "renesas,r8a77995-cpg-mssr",
+		.data = &r8a77995_cpg_mssr_info,
+	},
 #endif
 	{ /* sentinel */ }
 };
diff --git a/drivers/clk/renesas/renesas-cpg-mssr.h b/drivers/clk/renesas/renesas-cpg-mssr.h
index 43d7c7f6832d..94b9071d1061 100644
--- a/drivers/clk/renesas/renesas-cpg-mssr.h
+++ b/drivers/clk/renesas/renesas-cpg-mssr.h
@@ -138,6 +138,7 @@ extern const struct cpg_mssr_info r8a7792_cpg_mssr_info;
 extern const struct cpg_mssr_info r8a7794_cpg_mssr_info;
 extern const struct cpg_mssr_info r8a7795_cpg_mssr_info;
 extern const struct cpg_mssr_info r8a7796_cpg_mssr_info;
+extern const struct cpg_mssr_info r8a77995_cpg_mssr_info;
 
 
     /*
-- 
cgit v1.2.3


From 311accb64570db45604dd8929af6f7da735835c9 Mon Sep 17 00:00:00 2001
From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Date: Tue, 25 Jul 2017 15:26:27 +0900
Subject: clk: renesas: rcar-usb2-clock-sel: Add R-Car USB 2.0 clock selector
 PHY

R-Car USB 2.0 controller can change the clock source from an oscillator
to an external clock via a register. So, this patch adds support
the clock source selector as a clock driver.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
 .../bindings/clock/renesas,rcar-usb2-clock-sel.txt |  55 ++++++
 drivers/clk/renesas/Kconfig                        |   5 +
 drivers/clk/renesas/Makefile                       |   1 +
 drivers/clk/renesas/rcar-usb2-clock-sel.c          | 188 +++++++++++++++++++++
 4 files changed, 249 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/clock/renesas,rcar-usb2-clock-sel.txt
 create mode 100644 drivers/clk/renesas/rcar-usb2-clock-sel.c

diff --git a/Documentation/devicetree/bindings/clock/renesas,rcar-usb2-clock-sel.txt b/Documentation/devicetree/bindings/clock/renesas,rcar-usb2-clock-sel.txt
new file mode 100644
index 000000000000..e96e085271c1
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/renesas,rcar-usb2-clock-sel.txt
@@ -0,0 +1,55 @@
+* Renesas R-Car USB 2.0 clock selector
+
+This file provides information on what the device node for the R-Car USB 2.0
+clock selector.
+
+If you connect an external clock to the USB_EXTAL pin only, you should set
+the clock rate to "usb_extal" node only.
+If you connect an oscillator to both the USB_XTAL and USB_EXTAL, this module
+is not needed because this is default setting. (Of course, you can set the
+clock rates to both "usb_extal" and "usb_xtal" nodes.
+
+Case 1: An external clock connects to R-Car SoC
+	+----------+   +--- R-Car ---------------------+
+	|External  |---|USB_EXTAL ---> all usb channels|
+	|clock     |   |USB_XTAL                       |
+	+----------+   +-------------------------------+
+In this case, we need this driver with "usb_extal" clock.
+
+Case 2: An oscillator connects to R-Car SoC
+	+----------+   +--- R-Car ---------------------+
+	|Oscillator|---|USB_EXTAL -+-> all usb channels|
+	|          |---|USB_XTAL --+                   |
+	+----------+   +-------------------------------+
+In this case, we don't need this selector.
+
+Required properties:
+- compatible: "renesas,r8a7795-rcar-usb2-clock-sel" if the device is a part of
+	      an R8A7795 SoC.
+	      "renesas,r8a7796-rcar-usb2-clock-sel" if the device if a part of
+	      an R8A7796 SoC.
+	      "renesas,rcar-gen3-usb2-clock-sel" for a generic R-Car Gen3
+	      compatible device.
+
+	      When compatible with the generic version, nodes must list the
+	      SoC-specific version corresponding to the platform first
+	      followed by the generic version.
+
+- reg: offset and length of the USB 2.0 clock selector register block.
+- clocks: A list of phandles and specifier pairs.
+- clock-names: Name of the clocks.
+ - The functional clock must be "ehci_ohci"
+ - The USB_EXTAL clock pin must be "usb_extal"
+ - The USB_XTAL clock pin must be "usb_xtal"
+- #clock-cells: Must be 0
+
+Example (R-Car H3):
+
+	usb2_clksel: clock-controller@e6590630 {
+		compatible = "renesas,r8a77950-rcar-usb2-clock-sel",
+			     "renesas,rcar-gen3-usb2-clock-sel";
+		reg = <0 0xe6590630 0 0x02>;
+		clocks = <&cpg CPG_MOD 703>, <&usb_extal>, <&usb_xtal>;
+		clock-names = "ehci_ohci", "usb_extal", "usb_xtal";
+		#clock-cells = <0>;
+	};
diff --git a/drivers/clk/renesas/Kconfig b/drivers/clk/renesas/Kconfig
index eee076deb739..acbb38151ba1 100644
--- a/drivers/clk/renesas/Kconfig
+++ b/drivers/clk/renesas/Kconfig
@@ -119,6 +119,11 @@ config CLK_RCAR_GEN3_CPG
 	bool "R-Car Gen3 CPG clock support" if COMPILE_TEST
 	select CLK_RENESAS_CPG_MSSR
 
+config CLK_RCAR_USB2_CLOCK_SEL
+	bool "Renesas R-Car USB2 clock selector support"
+	depends on ARCH_RENESAS || COMPILE_TEST
+	help
+	  This is a driver for R-Car USB2 clock selector
 
 # Generic
 config CLK_RENESAS_CPG_MSSR
diff --git a/drivers/clk/renesas/Makefile b/drivers/clk/renesas/Makefile
index a3bb1fadf1a6..9bda3ec5b199 100644
--- a/drivers/clk/renesas/Makefile
+++ b/drivers/clk/renesas/Makefile
@@ -20,6 +20,7 @@ obj-$(CONFIG_CLK_SH73A0)		+= clk-sh73a0.o
 obj-$(CONFIG_CLK_RCAR_GEN2)		+= clk-rcar-gen2.o
 obj-$(CONFIG_CLK_RCAR_GEN2_CPG)		+= rcar-gen2-cpg.o
 obj-$(CONFIG_CLK_RCAR_GEN3_CPG)		+= rcar-gen3-cpg.o
+obj-$(CONFIG_CLK_RCAR_USB2_CLOCK_SEL)	+= rcar-usb2-clock-sel.o
 
 # Generic
 obj-$(CONFIG_CLK_RENESAS_CPG_MSSR)	+= renesas-cpg-mssr.o
diff --git a/drivers/clk/renesas/rcar-usb2-clock-sel.c b/drivers/clk/renesas/rcar-usb2-clock-sel.c
new file mode 100644
index 000000000000..6cd030a58964
--- /dev/null
+++ b/drivers/clk/renesas/rcar-usb2-clock-sel.c
@@ -0,0 +1,188 @@
+/*
+ * Renesas R-Car USB2.0 clock selector
+ *
+ * Copyright (C) 2017 Renesas Electronics Corp.
+ *
+ * Based on renesas-cpg-mssr.c
+ *
+ * Copyright (C) 2015 Glider bvba
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/device.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/pm.h>
+#include <linux/pm_runtime.h>
+#include <linux/slab.h>
+
+#define USB20_CLKSET0		0x00
+#define CLKSET0_INTCLK_EN	BIT(11)
+#define CLKSET0_PRIVATE		BIT(0)
+#define CLKSET0_EXTAL_ONLY	(CLKSET0_INTCLK_EN | CLKSET0_PRIVATE)
+
+struct usb2_clock_sel_priv {
+	void __iomem *base;
+	struct clk_hw hw;
+	bool extal;
+	bool xtal;
+};
+#define to_priv(_hw)	container_of(_hw, struct usb2_clock_sel_priv, hw)
+
+static void usb2_clock_sel_enable_extal_only(struct usb2_clock_sel_priv *priv)
+{
+	u16 val = readw(priv->base + USB20_CLKSET0);
+
+	pr_debug("%s: enter %d %d %x\n", __func__,
+		 priv->extal, priv->xtal, val);
+
+	if (priv->extal && !priv->xtal && val != CLKSET0_EXTAL_ONLY)
+		writew(CLKSET0_EXTAL_ONLY, priv->base + USB20_CLKSET0);
+}
+
+static void usb2_clock_sel_disable_extal_only(struct usb2_clock_sel_priv *priv)
+{
+	if (priv->extal && !priv->xtal)
+		writew(CLKSET0_PRIVATE, priv->base + USB20_CLKSET0);
+}
+
+static int usb2_clock_sel_enable(struct clk_hw *hw)
+{
+	usb2_clock_sel_enable_extal_only(to_priv(hw));
+
+	return 0;
+}
+
+static void usb2_clock_sel_disable(struct clk_hw *hw)
+{
+	usb2_clock_sel_disable_extal_only(to_priv(hw));
+}
+
+/*
+ * This module seems a mux, but this driver assumes a gate because
+ * ehci/ohci platform drivers don't support clk_set_parent() for now.
+ * If this driver acts as a gate, ehci/ohci-platform drivers don't need
+ * any modification.
+ */
+static const struct clk_ops usb2_clock_sel_clock_ops = {
+	.enable = usb2_clock_sel_enable,
+	.disable = usb2_clock_sel_disable,
+};
+
+static const struct of_device_id rcar_usb2_clock_sel_match[] = {
+	{ .compatible = "renesas,rcar-gen3-usb2-clock-sel" },
+	{ }
+};
+
+static int rcar_usb2_clock_sel_suspend(struct device *dev)
+{
+	struct usb2_clock_sel_priv *priv = dev_get_drvdata(dev);
+
+	usb2_clock_sel_disable_extal_only(priv);
+	pm_runtime_put(dev);
+
+	return 0;
+}
+
+static int rcar_usb2_clock_sel_resume(struct device *dev)
+{
+	struct usb2_clock_sel_priv *priv = dev_get_drvdata(dev);
+
+	pm_runtime_get_sync(dev);
+	usb2_clock_sel_enable_extal_only(priv);
+
+	return 0;
+}
+
+static int rcar_usb2_clock_sel_remove(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct usb2_clock_sel_priv *priv = platform_get_drvdata(pdev);
+
+	of_clk_del_provider(dev->of_node);
+	clk_hw_unregister(&priv->hw);
+	pm_runtime_put(dev);
+	pm_runtime_disable(dev);
+
+	return 0;
+}
+
+static int rcar_usb2_clock_sel_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *np = dev->of_node;
+	struct usb2_clock_sel_priv *priv;
+	struct resource *res;
+	struct clk *clk;
+	struct clk_init_data init;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	priv->base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(priv->base))
+		return PTR_ERR(priv->base);
+
+	pm_runtime_enable(dev);
+	pm_runtime_get_sync(dev);
+
+	clk = devm_clk_get(dev, "usb_extal");
+	if (!IS_ERR(clk) && !clk_prepare_enable(clk)) {
+		priv->extal = !!clk_get_rate(clk);
+		clk_disable_unprepare(clk);
+	}
+	clk = devm_clk_get(dev, "usb_xtal");
+	if (!IS_ERR(clk) && !clk_prepare_enable(clk)) {
+		priv->xtal = !!clk_get_rate(clk);
+		clk_disable_unprepare(clk);
+	}
+
+	if (!priv->extal && !priv->xtal) {
+		dev_err(dev, "This driver needs usb_extal or usb_xtal\n");
+		return -ENOENT;
+	}
+
+	platform_set_drvdata(pdev, priv);
+	dev_set_drvdata(dev, priv);
+
+	init.name = "rcar_usb2_clock_sel";
+	init.ops = &usb2_clock_sel_clock_ops;
+	init.flags = 0;
+	init.parent_names = NULL;
+	init.num_parents = 0;
+	priv->hw.init = &init;
+
+	clk = clk_register(NULL, &priv->hw);
+	if (IS_ERR(clk))
+		return PTR_ERR(clk);
+
+	return of_clk_add_hw_provider(np, of_clk_hw_simple_get, &priv->hw);
+}
+
+static const struct dev_pm_ops rcar_usb2_clock_sel_pm_ops = {
+	.suspend	= rcar_usb2_clock_sel_suspend,
+	.resume		= rcar_usb2_clock_sel_resume,
+};
+
+static struct platform_driver rcar_usb2_clock_sel_driver = {
+	.driver		= {
+		.name	= "rcar-usb2-clock-sel",
+		.of_match_table = rcar_usb2_clock_sel_match,
+		.pm	= &rcar_usb2_clock_sel_pm_ops,
+	},
+	.probe		= rcar_usb2_clock_sel_probe,
+	.remove		= rcar_usb2_clock_sel_remove,
+};
+builtin_platform_driver(rcar_usb2_clock_sel_driver);
+
+MODULE_DESCRIPTION("Renesas R-Car USB2 clock selector Driver");
+MODULE_LICENSE("GPL v2");
-- 
cgit v1.2.3


From c29f82951b974f27e0bc4ce2525db164f86f2e4d Mon Sep 17 00:00:00 2001
From: Hiromitsu Yamasaki <hiromitsu.yamasaki.ym@renesas.com>
Date: Wed, 26 Jul 2017 20:23:39 +0900
Subject: clk: renesas: r8a7796: Add USB3.0 clock

This patch adds USB3.0-IF0 clock for R8A7796 SoC.

Signed-off-by: Hiromitsu Yamasaki <hiromitsu.yamasaki.ym@renesas.com>
Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
 drivers/clk/renesas/r8a7796-cpg-mssr.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/clk/renesas/r8a7796-cpg-mssr.c b/drivers/clk/renesas/r8a7796-cpg-mssr.c
index 22ba3c497aba..e5e7fb212288 100644
--- a/drivers/clk/renesas/r8a7796-cpg-mssr.c
+++ b/drivers/clk/renesas/r8a7796-cpg-mssr.c
@@ -138,6 +138,7 @@ static const struct mssr_mod_clk r8a7796_mod_clks[] __initconst = {
 	DEF_MOD("sdif0",		 314,	R8A7796_CLK_SD0),
 	DEF_MOD("pcie1",		 318,	R8A7796_CLK_S3D1),
 	DEF_MOD("pcie0",		 319,	R8A7796_CLK_S3D1),
+	DEF_MOD("usb3-if0",		 328,	R8A7796_CLK_S3D1),
 	DEF_MOD("usb-dmac0",		 330,	R8A7796_CLK_S3D1),
 	DEF_MOD("usb-dmac1",		 331,	R8A7796_CLK_S3D1),
 	DEF_MOD("rwdt",			 402,	R8A7796_CLK_R),
-- 
cgit v1.2.3


From 0a6341555e64915493d2925a1fca61efaa01f570 Mon Sep 17 00:00:00 2001
From: Icenowy Zheng <icenowy@aosc.io>
Date: Sat, 27 May 2017 18:23:05 +0800
Subject: dt-bindings: add compatible string for Allwinner R40 CCU

Allwinner R40 has a clock controlling unit like the ones on other
Allwinner SoCs after sun6i, and can also use a CCU-based driver.

Add a compatible string for it.

Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---
 Documentation/devicetree/bindings/clock/sunxi-ccu.txt | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/clock/sunxi-ccu.txt b/Documentation/devicetree/bindings/clock/sunxi-ccu.txt
index dbe0c1c58ab5..a082260295b1 100644
--- a/Documentation/devicetree/bindings/clock/sunxi-ccu.txt
+++ b/Documentation/devicetree/bindings/clock/sunxi-ccu.txt
@@ -12,6 +12,7 @@ Required properties :
 		- "allwinner,sun8i-a83t-r-ccu"
 		- "allwinner,sun8i-h3-ccu"
 		- "allwinner,sun8i-h3-r-ccu"
++		- "allwinner,sun8i-r40-ccu"
 		- "allwinner,sun8i-v3s-ccu"
 		- "allwinner,sun9i-a80-ccu"
 		- "allwinner,sun50i-a64-ccu"
-- 
cgit v1.2.3


From cd030a78f7aa06fe216f6665a6ea84b8f3e5b3d3 Mon Sep 17 00:00:00 2001
From: Icenowy Zheng <icenowy@aosc.io>
Date: Tue, 15 Aug 2017 13:55:29 +0800
Subject: clk: sunxi-ng: support R40 SoC

Allwinner R40 SoC have a clock controller module in the style of the
SoCs beyond sun6i, however, it's more rich and complex.

Add support for it.

Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---
 drivers/clk/sunxi-ng/Kconfig              |    5 +
 drivers/clk/sunxi-ng/Makefile             |    1 +
 drivers/clk/sunxi-ng/ccu-sun8i-r40.c      | 1290 +++++++++++++++++++++++++++++
 drivers/clk/sunxi-ng/ccu-sun8i-r40.h      |   69 ++
 include/dt-bindings/clock/sun8i-r40-ccu.h |  187 +++++
 include/dt-bindings/reset/sun8i-r40-ccu.h |  130 +++
 6 files changed, 1682 insertions(+)
 create mode 100644 drivers/clk/sunxi-ng/ccu-sun8i-r40.c
 create mode 100644 drivers/clk/sunxi-ng/ccu-sun8i-r40.h
 create mode 100644 include/dt-bindings/clock/sun8i-r40-ccu.h
 create mode 100644 include/dt-bindings/reset/sun8i-r40-ccu.h

diff --git a/drivers/clk/sunxi-ng/Kconfig b/drivers/clk/sunxi-ng/Kconfig
index 7342928c35cd..7a360737fe3c 100644
--- a/drivers/clk/sunxi-ng/Kconfig
+++ b/drivers/clk/sunxi-ng/Kconfig
@@ -48,6 +48,11 @@ config SUN8I_V3S_CCU
 config SUN8I_DE2_CCU
 	bool "Support for the Allwinner SoCs DE2 CCU"
 
+config SUN8I_R40_CCU
+	bool "Support for the Allwinner R40 CCU"
+	default MACH_SUN8I
+	depends on MACH_SUN8I || COMPILE_TEST
+
 config SUN9I_A80_CCU
 	bool "Support for the Allwinner A80 CCU"
 	default MACH_SUN9I
diff --git a/drivers/clk/sunxi-ng/Makefile b/drivers/clk/sunxi-ng/Makefile
index 0c45fa50283d..58741cd647c3 100644
--- a/drivers/clk/sunxi-ng/Makefile
+++ b/drivers/clk/sunxi-ng/Makefile
@@ -28,6 +28,7 @@ obj-$(CONFIG_SUN8I_H3_CCU)	+= ccu-sun8i-h3.o
 obj-$(CONFIG_SUN8I_V3S_CCU)	+= ccu-sun8i-v3s.o
 obj-$(CONFIG_SUN8I_DE2_CCU)	+= ccu-sun8i-de2.o
 obj-$(CONFIG_SUN8I_R_CCU)	+= ccu-sun8i-r.o
+obj-$(CONFIG_SUN8I_R40_CCU)	+= ccu-sun8i-r40.o
 obj-$(CONFIG_SUN9I_A80_CCU)	+= ccu-sun9i-a80.o
 obj-$(CONFIG_SUN9I_A80_CCU)	+= ccu-sun9i-a80-de.o
 obj-$(CONFIG_SUN9I_A80_CCU)	+= ccu-sun9i-a80-usb.o
diff --git a/drivers/clk/sunxi-ng/ccu-sun8i-r40.c b/drivers/clk/sunxi-ng/ccu-sun8i-r40.c
new file mode 100644
index 000000000000..933f2e68f42a
--- /dev/null
+++ b/drivers/clk/sunxi-ng/ccu-sun8i-r40.c
@@ -0,0 +1,1290 @@
+/*
+ * Copyright (c) 2017 Icenowy Zheng <icenowy@aosc.io>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/of_address.h>
+
+#include "ccu_common.h"
+#include "ccu_reset.h"
+
+#include "ccu_div.h"
+#include "ccu_gate.h"
+#include "ccu_mp.h"
+#include "ccu_mult.h"
+#include "ccu_nk.h"
+#include "ccu_nkm.h"
+#include "ccu_nkmp.h"
+#include "ccu_nm.h"
+#include "ccu_phase.h"
+
+#include "ccu-sun8i-r40.h"
+
+/* TODO: The result of N*K is required to be in [10, 88] range. */
+static struct ccu_nkmp pll_cpu_clk = {
+	.enable		= BIT(31),
+	.lock		= BIT(28),
+	.n		= _SUNXI_CCU_MULT(8, 5),
+	.k		= _SUNXI_CCU_MULT(4, 2),
+	.m		= _SUNXI_CCU_DIV(0, 2),
+	.p		= _SUNXI_CCU_DIV_MAX(16, 2, 4),
+	.common		= {
+		.reg		= 0x000,
+		.hw.init	= CLK_HW_INIT("pll-cpu",
+					      "osc24M",
+					      &ccu_nkmp_ops,
+					      CLK_SET_RATE_UNGATE),
+	},
+};
+
+/*
+ * The Audio PLL is supposed to have 4 outputs: 3 fixed factors from
+ * the base (2x, 4x and 8x), and one variable divider (the one true
+ * pll audio).
+ *
+ * We don't have any need for the variable divider for now, so we just
+ * hardcode it to match with the clock names
+ */
+#define SUN8I_R40_PLL_AUDIO_REG	0x008
+
+static SUNXI_CCU_NM_WITH_GATE_LOCK(pll_audio_base_clk, "pll-audio-base",
+				   "osc24M", 0x008,
+				   8, 7,	/* N */
+				   0, 5,	/* M */
+				   BIT(31),	/* gate */
+				   BIT(28),	/* lock */
+				   CLK_SET_RATE_UNGATE);
+
+/* TODO: The result of N/M is required to be in [8, 25] range. */
+static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK(pll_video0_clk, "pll-video0",
+					"osc24M", 0x0010,
+					8, 7,		/* N */
+					0, 4,		/* M */
+					BIT(24),	/* frac enable */
+					BIT(25),	/* frac select */
+					270000000,	/* frac rate 0 */
+					297000000,	/* frac rate 1 */
+					BIT(31),	/* gate */
+					BIT(28),	/* lock */
+					CLK_SET_RATE_UNGATE);
+
+/* TODO: The result of N/M is required to be in [8, 25] range. */
+static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK(pll_ve_clk, "pll-ve",
+					"osc24M", 0x0018,
+					8, 7,		/* N */
+					0, 4,		/* M */
+					BIT(24),	/* frac enable */
+					BIT(25),	/* frac select */
+					270000000,	/* frac rate 0 */
+					297000000,	/* frac rate 1 */
+					BIT(31),	/* gate */
+					BIT(28),	/* lock */
+					CLK_SET_RATE_UNGATE);
+
+/* TODO: The result of N*K is required to be in [10, 77] range. */
+static SUNXI_CCU_NKM_WITH_GATE_LOCK(pll_ddr0_clk, "pll-ddr0",
+				    "osc24M", 0x020,
+				    8, 5,	/* N */
+				    4, 2,	/* K */
+				    0, 2,	/* M */
+				    BIT(31),	/* gate */
+				    BIT(28),	/* lock */
+				    CLK_SET_RATE_UNGATE);
+
+/* TODO: The result of N*K is required to be in [21, 58] range. */
+static struct ccu_nk pll_periph0_clk = {
+	.enable		= BIT(31),
+	.lock		= BIT(28),
+	.n		= _SUNXI_CCU_MULT(8, 5),
+	.k		= _SUNXI_CCU_MULT(4, 2),
+	.fixed_post_div	= 2,
+	.common		= {
+		.reg		= 0x028,
+		.features	= CCU_FEATURE_FIXED_POSTDIV,
+		.hw.init	= CLK_HW_INIT("pll-periph0", "osc24M",
+					      &ccu_nk_ops,
+					      CLK_SET_RATE_UNGATE),
+	},
+};
+
+static struct ccu_div pll_periph0_sata_clk = {
+	.enable		= BIT(24),
+	.div		= _SUNXI_CCU_DIV(0, 2),
+	/*
+	 * The formula of pll-periph0 (1x) is 24MHz*N*K/2, and the formula
+	 * of pll-periph0-sata is 24MHz*N*K/M/6, so the postdiv here is
+	 * 6/2 = 3.
+	 */
+	.fixed_post_div	= 3,
+	.common		= {
+		.reg		= 0x028,
+		.features	= CCU_FEATURE_FIXED_POSTDIV,
+		.hw.init	= CLK_HW_INIT("pll-periph0-sata",
+					      "pll-periph0",
+					      &ccu_div_ops, 0),
+	},
+};
+
+/* TODO: The result of N*K is required to be in [21, 58] range. */
+static struct ccu_nk pll_periph1_clk = {
+	.enable		= BIT(31),
+	.lock		= BIT(28),
+	.n		= _SUNXI_CCU_MULT(8, 5),
+	.k		= _SUNXI_CCU_MULT(4, 2),
+	.fixed_post_div	= 2,
+	.common		= {
+		.reg		= 0x02c,
+		.features	= CCU_FEATURE_FIXED_POSTDIV,
+		.hw.init	= CLK_HW_INIT("pll-periph1", "osc24M",
+					      &ccu_nk_ops,
+					      CLK_SET_RATE_UNGATE),
+	},
+};
+
+/* TODO: The result of N/M is required to be in [8, 25] range. */
+static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK(pll_video1_clk, "pll-video1",
+					"osc24M", 0x030,
+					8, 7,		/* N */
+					0, 4,		/* M */
+					BIT(24),	/* frac enable */
+					BIT(25),	/* frac select */
+					270000000,	/* frac rate 0 */
+					297000000,	/* frac rate 1 */
+					BIT(31),	/* gate */
+					BIT(28),	/* lock */
+					CLK_SET_RATE_UNGATE);
+
+static struct ccu_nkm pll_sata_clk = {
+	.enable		= BIT(31),
+	.lock		= BIT(28),
+	.n		= _SUNXI_CCU_MULT(8, 5),
+	.k		= _SUNXI_CCU_MULT(4, 2),
+	.m		= _SUNXI_CCU_DIV(0, 2),
+	.fixed_post_div	= 6,
+	.common		= {
+		.reg		= 0x034,
+		.features	= CCU_FEATURE_FIXED_POSTDIV,
+		.hw.init	= CLK_HW_INIT("pll-sata", "osc24M",
+					      &ccu_nkm_ops,
+					      CLK_SET_RATE_UNGATE),
+	},
+};
+
+static const char * const pll_sata_out_parents[] = { "pll-sata",
+						     "pll-periph0-sata" };
+static SUNXI_CCU_MUX_WITH_GATE(pll_sata_out_clk, "pll-sata-out",
+			       pll_sata_out_parents, 0x034,
+			       30, 1,	/* mux */
+			       BIT(14),	/* gate */
+			       CLK_SET_RATE_PARENT);
+
+/* TODO: The result of N/M is required to be in [8, 25] range. */
+static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK(pll_gpu_clk, "pll-gpu",
+					"osc24M", 0x038,
+					8, 7,		/* N */
+					0, 4,		/* M */
+					BIT(24),	/* frac enable */
+					BIT(25),	/* frac select */
+					270000000,	/* frac rate 0 */
+					297000000,	/* frac rate 1 */
+					BIT(31),	/* gate */
+					BIT(28),	/* lock */
+					CLK_SET_RATE_UNGATE);
+
+/*
+ * The MIPI PLL has 2 modes: "MIPI" and "HDMI".
+ *
+ * The MIPI mode is a standard NKM-style clock. The HDMI mode is an
+ * integer / fractional clock with switchable multipliers and dividers.
+ * This is not supported here. We hardcode the PLL to MIPI mode.
+ *
+ * TODO: In the MIPI mode, M/N is required to be equal or lesser than 3,
+ * which cannot be implemented now.
+ */
+#define SUN8I_R40_PLL_MIPI_REG	0x040
+
+static const char * const pll_mipi_parents[] = { "pll-video0" };
+static struct ccu_nkm pll_mipi_clk = {
+	.enable	= BIT(31) | BIT(23) | BIT(22),
+	.lock	= BIT(28),
+	.n	= _SUNXI_CCU_MULT(8, 4),
+	.k	= _SUNXI_CCU_MULT_MIN(4, 2, 2),
+	.m	= _SUNXI_CCU_DIV(0, 4),
+	.mux	= _SUNXI_CCU_MUX(21, 1),
+	.common	= {
+		.reg		= 0x040,
+		.hw.init	= CLK_HW_INIT_PARENTS("pll-mipi",
+						      pll_mipi_parents,
+						      &ccu_nkm_ops,
+						      CLK_SET_RATE_UNGATE)
+	},
+};
+
+/* TODO: The result of N/M is required to be in [8, 25] range. */
+static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK(pll_de_clk, "pll-de",
+					"osc24M", 0x048,
+					8, 7,		/* N */
+					0, 4,		/* M */
+					BIT(24),	/* frac enable */
+					BIT(25),	/* frac select */
+					270000000,	/* frac rate 0 */
+					297000000,	/* frac rate 1 */
+					BIT(31),	/* gate */
+					BIT(28),	/* lock */
+					CLK_SET_RATE_UNGATE);
+
+/* TODO: The N factor is required to be in [16, 75] range. */
+static SUNXI_CCU_NM_WITH_GATE_LOCK(pll_ddr1_clk, "pll-ddr1",
+				   "osc24M", 0x04c,
+				   8, 7,	/* N */
+				   0, 2,	/* M */
+				   BIT(31),	/* gate */
+				   BIT(28),	/* lock */
+				   CLK_SET_RATE_UNGATE);
+
+static const char * const cpu_parents[] = { "osc32k", "osc24M",
+					     "pll-cpu", "pll-cpu" };
+static SUNXI_CCU_MUX(cpu_clk, "cpu", cpu_parents,
+		     0x050, 16, 2, CLK_IS_CRITICAL | CLK_SET_RATE_PARENT);
+
+static SUNXI_CCU_M(axi_clk, "axi", "cpu", 0x050, 0, 2, 0);
+
+static const char * const ahb1_parents[] = { "osc32k", "osc24M",
+					     "axi", "pll-periph0" };
+static const struct ccu_mux_var_prediv ahb1_predivs[] = {
+	{ .index = 3, .shift = 6, .width = 2 },
+};
+static struct ccu_div ahb1_clk = {
+	.div		= _SUNXI_CCU_DIV_FLAGS(4, 2, CLK_DIVIDER_POWER_OF_TWO),
+
+	.mux		= {
+		.shift	= 12,
+		.width	= 2,
+
+		.var_predivs	= ahb1_predivs,
+		.n_var_predivs	= ARRAY_SIZE(ahb1_predivs),
+	},
+
+	.common		= {
+		.reg		= 0x054,
+		.features	= CCU_FEATURE_VARIABLE_PREDIV,
+		.hw.init	= CLK_HW_INIT_PARENTS("ahb1",
+						      ahb1_parents,
+						      &ccu_div_ops,
+						      0),
+	},
+};
+
+static struct clk_div_table apb1_div_table[] = {
+	{ .val = 0, .div = 2 },
+	{ .val = 1, .div = 2 },
+	{ .val = 2, .div = 4 },
+	{ .val = 3, .div = 8 },
+	{ /* Sentinel */ },
+};
+static SUNXI_CCU_DIV_TABLE(apb1_clk, "apb1", "ahb1",
+			   0x054, 8, 2, apb1_div_table, 0);
+
+static const char * const apb2_parents[] = { "osc32k", "osc24M",
+					     "pll-periph0-2x",
+					     "pll-periph0-2x" };
+static SUNXI_CCU_MP_WITH_MUX(apb2_clk, "apb2", apb2_parents, 0x058,
+			     0, 5,	/* M */
+			     16, 2,	/* P */
+			     24, 2,	/* mux */
+			     0);
+
+static SUNXI_CCU_GATE(bus_mipi_dsi_clk,	"bus-mipi-dsi",	"ahb1",
+		      0x060, BIT(1), 0);
+static SUNXI_CCU_GATE(bus_ce_clk,	"bus-ce",	"ahb1",
+		      0x060, BIT(5), 0);
+static SUNXI_CCU_GATE(bus_dma_clk,	"bus-dma",	"ahb1",
+		      0x060, BIT(6), 0);
+static SUNXI_CCU_GATE(bus_mmc0_clk,	"bus-mmc0",	"ahb1",
+		      0x060, BIT(8), 0);
+static SUNXI_CCU_GATE(bus_mmc1_clk,	"bus-mmc1",	"ahb1",
+		      0x060, BIT(9), 0);
+static SUNXI_CCU_GATE(bus_mmc2_clk,	"bus-mmc2",	"ahb1",
+		      0x060, BIT(10), 0);
+static SUNXI_CCU_GATE(bus_mmc3_clk,	"bus-mmc3",	"ahb1",
+		      0x060, BIT(11), 0);
+static SUNXI_CCU_GATE(bus_nand_clk,	"bus-nand",	"ahb1",
+		      0x060, BIT(13), 0);
+static SUNXI_CCU_GATE(bus_dram_clk,	"bus-dram",	"ahb1",
+		      0x060, BIT(14), 0);
+static SUNXI_CCU_GATE(bus_emac_clk,	"bus-emac",	"ahb1",
+		      0x060, BIT(17), 0);
+static SUNXI_CCU_GATE(bus_ts_clk,	"bus-ts",	"ahb1",
+		      0x060, BIT(18), 0);
+static SUNXI_CCU_GATE(bus_hstimer_clk,	"bus-hstimer",	"ahb1",
+		      0x060, BIT(19), 0);
+static SUNXI_CCU_GATE(bus_spi0_clk,	"bus-spi0",	"ahb1",
+		      0x060, BIT(20), 0);
+static SUNXI_CCU_GATE(bus_spi1_clk,	"bus-spi1",	"ahb1",
+		      0x060, BIT(21), 0);
+static SUNXI_CCU_GATE(bus_spi2_clk,	"bus-spi2",	"ahb1",
+		      0x060, BIT(22), 0);
+static SUNXI_CCU_GATE(bus_spi3_clk,	"bus-spi3",	"ahb1",
+		      0x060, BIT(23), 0);
+static SUNXI_CCU_GATE(bus_sata_clk,	"bus-sata",	"ahb1",
+		      0x060, BIT(24), 0);
+static SUNXI_CCU_GATE(bus_otg_clk,	"bus-otg",	"ahb1",
+		      0x060, BIT(25), 0);
+static SUNXI_CCU_GATE(bus_ehci0_clk,	"bus-ehci0",	"ahb1",
+		      0x060, BIT(26), 0);
+static SUNXI_CCU_GATE(bus_ehci1_clk,	"bus-ehci1",	"ahb1",
+		      0x060, BIT(27), 0);
+static SUNXI_CCU_GATE(bus_ehci2_clk,	"bus-ehci2",	"ahb1",
+		      0x060, BIT(28), 0);
+static SUNXI_CCU_GATE(bus_ohci0_clk,	"bus-ohci0",	"ahb1",
+		      0x060, BIT(29), 0);
+static SUNXI_CCU_GATE(bus_ohci1_clk,	"bus-ohci1",	"ahb1",
+		      0x060, BIT(30), 0);
+static SUNXI_CCU_GATE(bus_ohci2_clk,	"bus-ohci2",	"ahb1",
+		      0x060, BIT(31), 0);
+
+static SUNXI_CCU_GATE(bus_ve_clk,	"bus-ve",	"ahb1",
+		      0x064, BIT(0), 0);
+static SUNXI_CCU_GATE(bus_mp_clk,	"bus-mp",	"ahb1",
+		      0x064, BIT(2), 0);
+static SUNXI_CCU_GATE(bus_deinterlace_clk,	"bus-deinterlace",	"ahb1",
+		      0x064, BIT(5), 0);
+static SUNXI_CCU_GATE(bus_csi0_clk,	"bus-csi0",	"ahb1",
+		      0x064, BIT(8), 0);
+static SUNXI_CCU_GATE(bus_csi1_clk,	"bus-csi1",	"ahb1",
+		      0x064, BIT(9), 0);
+static SUNXI_CCU_GATE(bus_hdmi0_clk,	"bus-hdmi0",	"ahb1",
+		      0x064, BIT(10), 0);
+static SUNXI_CCU_GATE(bus_hdmi1_clk,	"bus-hdmi1",	"ahb1",
+		      0x064, BIT(11), 0);
+static SUNXI_CCU_GATE(bus_de_clk,	"bus-de",	"ahb1",
+		      0x064, BIT(12), 0);
+static SUNXI_CCU_GATE(bus_tve0_clk,	"bus-tve0",	"ahb1",
+		      0x064, BIT(13), 0);
+static SUNXI_CCU_GATE(bus_tve1_clk,	"bus-tve1",	"ahb1",
+		      0x064, BIT(14), 0);
+static SUNXI_CCU_GATE(bus_tve_top_clk,	"bus-tve-top",	"ahb1",
+		      0x064, BIT(15), 0);
+static SUNXI_CCU_GATE(bus_gmac_clk,	"bus-gmac",	"ahb1",
+		      0x064, BIT(17), 0);
+static SUNXI_CCU_GATE(bus_gpu_clk,	"bus-gpu",	"ahb1",
+		      0x064, BIT(20), 0);
+static SUNXI_CCU_GATE(bus_tvd0_clk,	"bus-tvd0",	"ahb1",
+		      0x064, BIT(21), 0);
+static SUNXI_CCU_GATE(bus_tvd1_clk,	"bus-tvd1",	"ahb1",
+		      0x064, BIT(22), 0);
+static SUNXI_CCU_GATE(bus_tvd2_clk,	"bus-tvd2",	"ahb1",
+		      0x064, BIT(23), 0);
+static SUNXI_CCU_GATE(bus_tvd3_clk,	"bus-tvd3",	"ahb1",
+		      0x064, BIT(24), 0);
+static SUNXI_CCU_GATE(bus_tvd_top_clk,	"bus-tvd-top",	"ahb1",
+		      0x064, BIT(25), 0);
+static SUNXI_CCU_GATE(bus_tcon_lcd0_clk,	"bus-tcon-lcd0",	"ahb1",
+		      0x064, BIT(26), 0);
+static SUNXI_CCU_GATE(bus_tcon_lcd1_clk,	"bus-tcon-lcd1",	"ahb1",
+		      0x064, BIT(27), 0);
+static SUNXI_CCU_GATE(bus_tcon_tv0_clk,	"bus-tcon-tv0",	"ahb1",
+		      0x064, BIT(28), 0);
+static SUNXI_CCU_GATE(bus_tcon_tv1_clk,	"bus-tcon-tv1",	"ahb1",
+		      0x064, BIT(29), 0);
+static SUNXI_CCU_GATE(bus_tcon_top_clk,	"bus-tcon-top",	"ahb1",
+		      0x064, BIT(30), 0);
+
+static SUNXI_CCU_GATE(bus_codec_clk,	"bus-codec",	"apb1",
+		      0x068, BIT(0), 0);
+static SUNXI_CCU_GATE(bus_spdif_clk,	"bus-spdif",	"apb1",
+		      0x068, BIT(1), 0);
+static SUNXI_CCU_GATE(bus_ac97_clk,	"bus-ac97",	"apb1",
+		      0x068, BIT(2), 0);
+static SUNXI_CCU_GATE(bus_pio_clk,	"bus-pio",	"apb1",
+		      0x068, BIT(5), 0);
+static SUNXI_CCU_GATE(bus_ir0_clk,	"bus-ir0",	"apb1",
+		      0x068, BIT(6), 0);
+static SUNXI_CCU_GATE(bus_ir1_clk,	"bus-ir1",	"apb1",
+		      0x068, BIT(7), 0);
+static SUNXI_CCU_GATE(bus_ths_clk,	"bus-ths",	"apb1",
+		      0x068, BIT(8), 0);
+static SUNXI_CCU_GATE(bus_keypad_clk,	"bus-keypad",	"apb1",
+		      0x068, BIT(10), 0);
+static SUNXI_CCU_GATE(bus_i2s0_clk,	"bus-i2s0",	"apb1",
+		      0x068, BIT(12), 0);
+static SUNXI_CCU_GATE(bus_i2s1_clk,	"bus-i2s1",	"apb1",
+		      0x068, BIT(13), 0);
+static SUNXI_CCU_GATE(bus_i2s2_clk,	"bus-i2s2",	"apb1",
+		      0x068, BIT(14), 0);
+
+static SUNXI_CCU_GATE(bus_i2c0_clk,	"bus-i2c0",	"apb2",
+		      0x06c, BIT(0), 0);
+static SUNXI_CCU_GATE(bus_i2c1_clk,	"bus-i2c1",	"apb2",
+		      0x06c, BIT(1), 0);
+static SUNXI_CCU_GATE(bus_i2c2_clk,	"bus-i2c2",	"apb2",
+		      0x06c, BIT(2), 0);
+static SUNXI_CCU_GATE(bus_i2c3_clk,	"bus-i2c3",	"apb2",
+		      0x06c, BIT(3), 0);
+/*
+ * In datasheet here's "Reserved", however the gate exists in BSP soucre
+ * code.
+ */
+static SUNXI_CCU_GATE(bus_can_clk,	"bus-can",	"apb2",
+		      0x06c, BIT(4), 0);
+static SUNXI_CCU_GATE(bus_scr_clk,	"bus-scr",	"apb2",
+		      0x06c, BIT(5), 0);
+static SUNXI_CCU_GATE(bus_ps20_clk,	"bus-ps20",	"apb2",
+		      0x06c, BIT(6), 0);
+static SUNXI_CCU_GATE(bus_ps21_clk,	"bus-ps21",	"apb2",
+		      0x06c, BIT(7), 0);
+static SUNXI_CCU_GATE(bus_i2c4_clk,	"bus-i2c4",	"apb2",
+		      0x06c, BIT(15), 0);
+static SUNXI_CCU_GATE(bus_uart0_clk,	"bus-uart0",	"apb2",
+		      0x06c, BIT(16), 0);
+static SUNXI_CCU_GATE(bus_uart1_clk,	"bus-uart1",	"apb2",
+		      0x06c, BIT(17), 0);
+static SUNXI_CCU_GATE(bus_uart2_clk,	"bus-uart2",	"apb2",
+		      0x06c, BIT(18), 0);
+static SUNXI_CCU_GATE(bus_uart3_clk,	"bus-uart3",	"apb2",
+		      0x06c, BIT(19), 0);
+static SUNXI_CCU_GATE(bus_uart4_clk,	"bus-uart4",	"apb2",
+		      0x06c, BIT(20), 0);
+static SUNXI_CCU_GATE(bus_uart5_clk,	"bus-uart5",	"apb2",
+		      0x06c, BIT(21), 0);
+static SUNXI_CCU_GATE(bus_uart6_clk,	"bus-uart6",	"apb2",
+		      0x06c, BIT(22), 0);
+static SUNXI_CCU_GATE(bus_uart7_clk,	"bus-uart7",	"apb2",
+		      0x06c, BIT(23), 0);
+
+static SUNXI_CCU_GATE(bus_dbg_clk,	"bus-dbg",	"ahb1",
+		      0x070, BIT(7), 0);
+
+static const char * const ths_parents[] = { "osc24M" };
+static struct ccu_div ths_clk = {
+	.enable	= BIT(31),
+	.div	= _SUNXI_CCU_DIV_FLAGS(0, 2, CLK_DIVIDER_POWER_OF_TWO),
+	.mux	= _SUNXI_CCU_MUX(24, 2),
+	.common	= {
+		.reg		= 0x074,
+		.hw.init	= CLK_HW_INIT_PARENTS("ths",
+						      ths_parents,
+						      &ccu_div_ops,
+						      0),
+	},
+};
+
+static const char * const mod0_default_parents[] = { "osc24M", "pll-periph0",
+						     "pll-periph1" };
+static SUNXI_CCU_MP_WITH_MUX_GATE(nand_clk, "nand", mod0_default_parents, 0x080,
+				  0, 4,		/* M */
+				  16, 2,	/* P */
+				  24, 2,	/* mux */
+				  BIT(31),	/* gate */
+				  0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(mmc0_clk, "mmc0", mod0_default_parents, 0x088,
+				  0, 4,		/* M */
+				  16, 2,	/* P */
+				  24, 2,	/* mux */
+				  BIT(31),	/* gate */
+				  0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(mmc1_clk, "mmc1", mod0_default_parents, 0x08c,
+				  0, 4,		/* M */
+				  16, 2,	/* P */
+				  24, 2,	/* mux */
+				  BIT(31),	/* gate */
+				  0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(mmc2_clk, "mmc2", mod0_default_parents, 0x090,
+				  0, 4,		/* M */
+				  16, 2,	/* P */
+				  24, 2,	/* mux */
+				  BIT(31),	/* gate */
+				  0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(mmc3_clk, "mmc3", mod0_default_parents, 0x094,
+				  0, 4,		/* M */
+				  16, 2,	/* P */
+				  24, 2,	/* mux */
+				  BIT(31),	/* gate */
+				  0);
+
+static const char * const ts_parents[] = { "osc24M", "pll-periph0", };
+static SUNXI_CCU_MP_WITH_MUX_GATE(ts_clk, "ts", ts_parents, 0x098,
+				  0, 4,		/* M */
+				  16, 2,	/* P */
+				  24, 4,	/* mux */
+				  BIT(31),	/* gate */
+				  0);
+
+static const char * const ce_parents[] = { "osc24M", "pll-periph0-2x",
+					   "pll-periph1-2x" };
+static SUNXI_CCU_MP_WITH_MUX_GATE(ce_clk, "ce", ce_parents, 0x09c,
+				  0, 4,		/* M */
+				  16, 2,	/* P */
+				  24, 2,	/* mux */
+				  BIT(31),	/* gate */
+				  0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(spi0_clk, "spi0", mod0_default_parents, 0x0a0,
+				  0, 4,		/* M */
+				  16, 2,	/* P */
+				  24, 2,	/* mux */
+				  BIT(31),	/* gate */
+				  0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(spi1_clk, "spi1", mod0_default_parents, 0x0a4,
+				  0, 4,		/* M */
+				  16, 2,	/* P */
+				  24, 2,	/* mux */
+				  BIT(31),	/* gate */
+				  0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(spi2_clk, "spi2", mod0_default_parents, 0x0a8,
+				  0, 4,		/* M */
+				  16, 2,	/* P */
+				  24, 2,	/* mux */
+				  BIT(31),	/* gate */
+				  0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(spi3_clk, "spi3", mod0_default_parents, 0x0ac,
+				  0, 4,		/* M */
+				  16, 2,	/* P */
+				  24, 2,	/* mux */
+				  BIT(31),	/* gate */
+				  0);
+
+static const char * const i2s_parents[] = { "pll-audio-8x", "pll-audio-4x",
+					    "pll-audio-2x", "pll-audio" };
+static SUNXI_CCU_MUX_WITH_GATE(i2s0_clk, "i2s0", i2s_parents,
+			       0x0b0, 16, 2, BIT(31), CLK_SET_RATE_PARENT);
+
+static SUNXI_CCU_MUX_WITH_GATE(i2s1_clk, "i2s1", i2s_parents,
+			       0x0b4, 16, 2, BIT(31), CLK_SET_RATE_PARENT);
+
+static SUNXI_CCU_MUX_WITH_GATE(i2s2_clk, "i2s2", i2s_parents,
+			       0x0b8, 16, 2, BIT(31), CLK_SET_RATE_PARENT);
+
+static SUNXI_CCU_MUX_WITH_GATE(ac97_clk, "ac97", i2s_parents,
+			       0x0bc, 16, 2, BIT(31), CLK_SET_RATE_PARENT);
+
+static SUNXI_CCU_MUX_WITH_GATE(spdif_clk, "spdif", i2s_parents,
+			       0x0c0, 16, 2, BIT(31), CLK_SET_RATE_PARENT);
+
+static const char * const keypad_parents[] = { "osc24M", "osc32k" };
+static const u8 keypad_table[] = { 0, 2 };
+static struct ccu_mp keypad_clk = {
+	.enable	= BIT(31),
+	.m	= _SUNXI_CCU_DIV(0, 5),
+	.p	= _SUNXI_CCU_DIV(16, 2),
+	.mux	= _SUNXI_CCU_MUX_TABLE(24, 2, keypad_table),
+	.common	= {
+		.reg		= 0x0c4,
+		.hw.init	= CLK_HW_INIT_PARENTS("keypad",
+						      keypad_parents,
+						      &ccu_mp_ops,
+						      0),
+	}
+};
+
+static const char * const sata_parents[] = { "pll-sata-out", "sata-ext" };
+static SUNXI_CCU_MUX_WITH_GATE(sata_clk, "sata", sata_parents,
+			       0x0c8, 24, 1, BIT(31), CLK_SET_RATE_PARENT);
+
+/*
+ * There are 3 OHCI 12M clock source selection bits in this register.
+ * We will force them to 0 (12M divided from 48M).
+ */
+#define SUN8I_R40_USB_CLK_REG	0x0cc
+
+static SUNXI_CCU_GATE(usb_phy0_clk,	"usb-phy0",	"osc24M",
+		      0x0cc, BIT(8), 0);
+static SUNXI_CCU_GATE(usb_phy1_clk,	"usb-phy1",	"osc24M",
+		      0x0cc, BIT(9), 0);
+static SUNXI_CCU_GATE(usb_phy2_clk,	"usb-phy2",	"osc24M",
+		      0x0cc, BIT(10), 0);
+static SUNXI_CCU_GATE(usb_ohci0_clk,	"usb-ohci0",	"osc12M",
+		      0x0cc, BIT(16), 0);
+static SUNXI_CCU_GATE(usb_ohci1_clk,	"usb-ohci1",	"osc12M",
+		      0x0cc, BIT(17), 0);
+static SUNXI_CCU_GATE(usb_ohci2_clk,	"usb-ohci2",	"osc12M",
+		      0x0cc, BIT(18), 0);
+
+static const char * const ir_parents[] = { "osc24M", "pll-periph0",
+					   "pll-periph1", "osc32k" };
+static SUNXI_CCU_MP_WITH_MUX_GATE(ir0_clk, "ir0", ir_parents, 0x0d0,
+				  0, 4,		/* M */
+				  16, 2,	/* P */
+				  24, 2,	/* mux */
+				  BIT(31),	/* gate */
+				  0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(ir1_clk, "ir1", ir_parents, 0x0d4,
+				  0, 4,		/* M */
+				  16, 2,	/* P */
+				  24, 2,	/* mux */
+				  BIT(31),	/* gate */
+				  0);
+
+static const char * const dram_parents[] = { "pll-ddr0", "pll-ddr1" };
+static SUNXI_CCU_M_WITH_MUX(dram_clk, "dram", dram_parents,
+			    0x0f4, 0, 2, 20, 2, CLK_IS_CRITICAL);
+
+static SUNXI_CCU_GATE(dram_ve_clk,	"dram-ve",	"dram",
+		      0x100, BIT(0), 0);
+static SUNXI_CCU_GATE(dram_csi0_clk,	"dram-csi0",	"dram",
+		      0x100, BIT(1), 0);
+static SUNXI_CCU_GATE(dram_csi1_clk,	"dram-csi1",	"dram",
+		      0x100, BIT(2), 0);
+static SUNXI_CCU_GATE(dram_ts_clk,	"dram-ts",	"dram",
+		      0x100, BIT(3), 0);
+static SUNXI_CCU_GATE(dram_tvd_clk,	"dram-tvd",	"dram",
+		      0x100, BIT(4), 0);
+static SUNXI_CCU_GATE(dram_mp_clk,	"dram-mp",	"dram",
+		      0x100, BIT(5), 0);
+static SUNXI_CCU_GATE(dram_deinterlace_clk,	"dram-deinterlace",	"dram",
+		      0x100, BIT(6), 0);
+
+static const char * const de_parents[] = { "pll-periph0-2x", "pll-de" };
+static SUNXI_CCU_M_WITH_MUX_GATE(de_clk, "de", de_parents,
+				 0x104, 0, 4, 24, 3, BIT(31), 0);
+static SUNXI_CCU_M_WITH_MUX_GATE(mp_clk, "mp", de_parents,
+				 0x108, 0, 4, 24, 3, BIT(31), 0);
+
+static const char * const tcon_parents[] = { "pll-video0", "pll-video1",
+					     "pll-video0-2x", "pll-video1-2x",
+					     "pll-mipi" };
+static SUNXI_CCU_MUX_WITH_GATE(tcon_lcd0_clk, "tcon-lcd0", tcon_parents,
+			       0x110, 24, 3, BIT(31), CLK_SET_RATE_PARENT);
+static SUNXI_CCU_MUX_WITH_GATE(tcon_lcd1_clk, "tcon-lcd1", tcon_parents,
+			       0x114, 24, 3, BIT(31), CLK_SET_RATE_PARENT);
+static SUNXI_CCU_M_WITH_MUX_GATE(tcon_tv0_clk, "tcon-tv0", tcon_parents,
+				 0x118, 0, 4, 24, 3, BIT(31), 0);
+static SUNXI_CCU_M_WITH_MUX_GATE(tcon_tv1_clk, "tcon-tv1", tcon_parents,
+				 0x11c, 0, 4, 24, 3, BIT(31), 0);
+
+static const char * const deinterlace_parents[] = { "pll-periph0",
+						    "pll-periph1" };
+static SUNXI_CCU_M_WITH_MUX_GATE(deinterlace_clk, "deinterlace",
+				 deinterlace_parents, 0x124, 0, 4, 24, 3,
+				 BIT(31), 0);
+
+static const char * const csi_mclk_parents[] = { "osc24M", "pll-video1",
+						 "pll-periph1" };
+static SUNXI_CCU_M_WITH_MUX_GATE(csi1_mclk_clk, "csi1-mclk", csi_mclk_parents,
+				 0x130, 0, 5, 8, 3, BIT(15), 0);
+
+static const char * const csi_sclk_parents[] = { "pll-periph0", "pll-periph1" };
+static SUNXI_CCU_M_WITH_MUX_GATE(csi_sclk_clk, "csi-sclk", csi_sclk_parents,
+				 0x134, 16, 4, 24, 3, BIT(31), 0);
+
+static SUNXI_CCU_M_WITH_MUX_GATE(csi0_mclk_clk, "csi0-mclk", csi_mclk_parents,
+				 0x134, 0, 5, 8, 3, BIT(15), 0);
+
+static SUNXI_CCU_M_WITH_GATE(ve_clk, "ve", "pll-ve",
+			     0x13c, 16, 3, BIT(31), CLK_SET_RATE_PARENT);
+
+static SUNXI_CCU_GATE(codec_clk,	"codec",	"pll-audio",
+		      0x140, BIT(31), CLK_SET_RATE_PARENT);
+static SUNXI_CCU_GATE(avs_clk,		"avs",		"osc24M",
+		      0x144, BIT(31), 0);
+
+static const char * const hdmi_parents[] = { "pll-video0", "pll-video1" };
+static SUNXI_CCU_M_WITH_MUX_GATE(hdmi_clk, "hdmi", hdmi_parents,
+				 0x150, 0, 4, 24, 2, BIT(31), 0);
+
+static SUNXI_CCU_GATE(hdmi_slow_clk,	"hdmi-slow",	"osc24M",
+		      0x154, BIT(31), 0);
+
+/*
+ * In the SoC's user manual, the P factor is mentioned, but not used in
+ * the frequency formula.
+ *
+ * Here the factor is included, according to the BSP kernel source,
+ * which contains the P factor of this clock.
+ */
+static const char * const mbus_parents[] = { "osc24M", "pll-periph0-2x",
+					     "pll-ddr0" };
+static SUNXI_CCU_MP_WITH_MUX_GATE(mbus_clk, "mbus", mbus_parents, 0x15c,
+				  0, 4,		/* M */
+				  16, 2,	/* P */
+				  24, 2,	/* mux */
+				  BIT(31),	/* gate */
+				  CLK_IS_CRITICAL);
+
+static const char * const dsi_dphy_parents[] = { "pll-video0", "pll-video1",
+						 "pll-periph0" };
+static SUNXI_CCU_M_WITH_MUX_GATE(dsi_dphy_clk, "dsi-dphy", dsi_dphy_parents,
+				 0x168, 0, 4, 8, 2, BIT(15), 0);
+
+static SUNXI_CCU_M_WITH_MUX_GATE(tve0_clk, "tve0", tcon_parents,
+				 0x180, 0, 4, 24, 3, BIT(31), 0);
+static SUNXI_CCU_M_WITH_MUX_GATE(tve1_clk, "tve1", tcon_parents,
+				 0x184, 0, 4, 24, 3, BIT(31), 0);
+
+static const char * const tvd_parents[] = { "pll-video0", "pll-video1",
+					    "pll-video0-2x", "pll-video1-2x" };
+static SUNXI_CCU_M_WITH_MUX_GATE(tvd0_clk, "tvd0", tvd_parents,
+				 0x188, 0, 4, 24, 3, BIT(31), 0);
+static SUNXI_CCU_M_WITH_MUX_GATE(tvd1_clk, "tvd1", tvd_parents,
+				 0x18c, 0, 4, 24, 3, BIT(31), 0);
+static SUNXI_CCU_M_WITH_MUX_GATE(tvd2_clk, "tvd2", tvd_parents,
+				 0x190, 0, 4, 24, 3, BIT(31), 0);
+static SUNXI_CCU_M_WITH_MUX_GATE(tvd3_clk, "tvd3", tvd_parents,
+				 0x194, 0, 4, 24, 3, BIT(31), 0);
+
+static SUNXI_CCU_M_WITH_GATE(gpu_clk, "gpu", "pll-gpu",
+			     0x1a0, 0, 3, BIT(31), CLK_SET_RATE_PARENT);
+
+static const char * const out_parents[] = { "osc24M", "osc32k", "osc24M" };
+static const struct ccu_mux_fixed_prediv out_predivs[] = {
+	{ .index = 0, .div = 750, },
+};
+
+static struct ccu_mp outa_clk = {
+	.enable	= BIT(31),
+	.m	= _SUNXI_CCU_DIV(8, 5),
+	.p	= _SUNXI_CCU_DIV(20, 2),
+	.mux	= {
+		.shift		= 24,
+		.width		= 2,
+		.fixed_predivs	= out_predivs,
+		.n_predivs	= ARRAY_SIZE(out_predivs),
+	},
+	.common	= {
+		.reg		= 0x1f0,
+		.features	= CCU_FEATURE_FIXED_PREDIV,
+		.hw.init	= CLK_HW_INIT_PARENTS("outa", out_parents,
+						      &ccu_mp_ops, 0),
+	}
+};
+
+static struct ccu_mp outb_clk = {
+	.enable	= BIT(31),
+	.m	= _SUNXI_CCU_DIV(8, 5),
+	.p	= _SUNXI_CCU_DIV(20, 2),
+	.mux	= {
+		.shift		= 24,
+		.width		= 2,
+		.fixed_predivs	= out_predivs,
+		.n_predivs	= ARRAY_SIZE(out_predivs),
+	},
+	.common	= {
+		.reg		= 0x1f4,
+		.features	= CCU_FEATURE_FIXED_PREDIV,
+		.hw.init	= CLK_HW_INIT_PARENTS("outb", out_parents,
+						      &ccu_mp_ops, 0),
+	}
+};
+
+static struct ccu_common *sun8i_r40_ccu_clks[] = {
+	&pll_cpu_clk.common,
+	&pll_audio_base_clk.common,
+	&pll_video0_clk.common,
+	&pll_ve_clk.common,
+	&pll_ddr0_clk.common,
+	&pll_periph0_clk.common,
+	&pll_periph0_sata_clk.common,
+	&pll_periph1_clk.common,
+	&pll_video1_clk.common,
+	&pll_sata_clk.common,
+	&pll_sata_out_clk.common,
+	&pll_gpu_clk.common,
+	&pll_mipi_clk.common,
+	&pll_de_clk.common,
+	&pll_ddr1_clk.common,
+	&cpu_clk.common,
+	&axi_clk.common,
+	&ahb1_clk.common,
+	&apb1_clk.common,
+	&apb2_clk.common,
+	&bus_mipi_dsi_clk.common,
+	&bus_ce_clk.common,
+	&bus_dma_clk.common,
+	&bus_mmc0_clk.common,
+	&bus_mmc1_clk.common,
+	&bus_mmc2_clk.common,
+	&bus_mmc3_clk.common,
+	&bus_nand_clk.common,
+	&bus_dram_clk.common,
+	&bus_emac_clk.common,
+	&bus_ts_clk.common,
+	&bus_hstimer_clk.common,
+	&bus_spi0_clk.common,
+	&bus_spi1_clk.common,
+	&bus_spi2_clk.common,
+	&bus_spi3_clk.common,
+	&bus_sata_clk.common,
+	&bus_otg_clk.common,
+	&bus_ehci0_clk.common,
+	&bus_ehci1_clk.common,
+	&bus_ehci2_clk.common,
+	&bus_ohci0_clk.common,
+	&bus_ohci1_clk.common,
+	&bus_ohci2_clk.common,
+	&bus_ve_clk.common,
+	&bus_mp_clk.common,
+	&bus_deinterlace_clk.common,
+	&bus_csi0_clk.common,
+	&bus_csi1_clk.common,
+	&bus_hdmi0_clk.common,
+	&bus_hdmi1_clk.common,
+	&bus_de_clk.common,
+	&bus_tve0_clk.common,
+	&bus_tve1_clk.common,
+	&bus_tve_top_clk.common,
+	&bus_gmac_clk.common,
+	&bus_gpu_clk.common,
+	&bus_tvd0_clk.common,
+	&bus_tvd1_clk.common,
+	&bus_tvd2_clk.common,
+	&bus_tvd3_clk.common,
+	&bus_tvd_top_clk.common,
+	&bus_tcon_lcd0_clk.common,
+	&bus_tcon_lcd1_clk.common,
+	&bus_tcon_tv0_clk.common,
+	&bus_tcon_tv1_clk.common,
+	&bus_tcon_top_clk.common,
+	&bus_codec_clk.common,
+	&bus_spdif_clk.common,
+	&bus_ac97_clk.common,
+	&bus_pio_clk.common,
+	&bus_ir0_clk.common,
+	&bus_ir1_clk.common,
+	&bus_ths_clk.common,
+	&bus_keypad_clk.common,
+	&bus_i2s0_clk.common,
+	&bus_i2s1_clk.common,
+	&bus_i2s2_clk.common,
+	&bus_i2c0_clk.common,
+	&bus_i2c1_clk.common,
+	&bus_i2c2_clk.common,
+	&bus_i2c3_clk.common,
+	&bus_can_clk.common,
+	&bus_scr_clk.common,
+	&bus_ps20_clk.common,
+	&bus_ps21_clk.common,
+	&bus_i2c4_clk.common,
+	&bus_uart0_clk.common,
+	&bus_uart1_clk.common,
+	&bus_uart2_clk.common,
+	&bus_uart3_clk.common,
+	&bus_uart4_clk.common,
+	&bus_uart5_clk.common,
+	&bus_uart6_clk.common,
+	&bus_uart7_clk.common,
+	&bus_dbg_clk.common,
+	&ths_clk.common,
+	&nand_clk.common,
+	&mmc0_clk.common,
+	&mmc1_clk.common,
+	&mmc2_clk.common,
+	&mmc3_clk.common,
+	&ts_clk.common,
+	&ce_clk.common,
+	&spi0_clk.common,
+	&spi1_clk.common,
+	&spi2_clk.common,
+	&spi3_clk.common,
+	&i2s0_clk.common,
+	&i2s1_clk.common,
+	&i2s2_clk.common,
+	&ac97_clk.common,
+	&spdif_clk.common,
+	&keypad_clk.common,
+	&sata_clk.common,
+	&usb_phy0_clk.common,
+	&usb_phy1_clk.common,
+	&usb_phy2_clk.common,
+	&usb_ohci0_clk.common,
+	&usb_ohci1_clk.common,
+	&usb_ohci2_clk.common,
+	&ir0_clk.common,
+	&ir1_clk.common,
+	&dram_clk.common,
+	&dram_ve_clk.common,
+	&dram_csi0_clk.common,
+	&dram_csi1_clk.common,
+	&dram_ts_clk.common,
+	&dram_tvd_clk.common,
+	&dram_mp_clk.common,
+	&dram_deinterlace_clk.common,
+	&de_clk.common,
+	&mp_clk.common,
+	&tcon_lcd0_clk.common,
+	&tcon_lcd1_clk.common,
+	&tcon_tv0_clk.common,
+	&tcon_tv1_clk.common,
+	&deinterlace_clk.common,
+	&csi1_mclk_clk.common,
+	&csi_sclk_clk.common,
+	&csi0_mclk_clk.common,
+	&ve_clk.common,
+	&codec_clk.common,
+	&avs_clk.common,
+	&hdmi_clk.common,
+	&hdmi_slow_clk.common,
+	&mbus_clk.common,
+	&dsi_dphy_clk.common,
+	&tve0_clk.common,
+	&tve1_clk.common,
+	&tvd0_clk.common,
+	&tvd1_clk.common,
+	&tvd2_clk.common,
+	&tvd3_clk.common,
+	&gpu_clk.common,
+	&outa_clk.common,
+	&outb_clk.common,
+};
+
+/* Fixed Factor clocks */
+static CLK_FIXED_FACTOR(osc12M_clk, "osc12M", "osc24M", 2, 1, 0);
+
+/* We hardcode the divider to 4 for now */
+static CLK_FIXED_FACTOR(pll_audio_clk, "pll-audio",
+			"pll-audio-base", 4, 1, CLK_SET_RATE_PARENT);
+static CLK_FIXED_FACTOR(pll_audio_2x_clk, "pll-audio-2x",
+			"pll-audio-base", 2, 1, CLK_SET_RATE_PARENT);
+static CLK_FIXED_FACTOR(pll_audio_4x_clk, "pll-audio-4x",
+			"pll-audio-base", 1, 1, CLK_SET_RATE_PARENT);
+static CLK_FIXED_FACTOR(pll_audio_8x_clk, "pll-audio-8x",
+			"pll-audio-base", 1, 2, CLK_SET_RATE_PARENT);
+static CLK_FIXED_FACTOR(pll_periph0_2x_clk, "pll-periph0-2x",
+			"pll-periph0", 1, 2, 0);
+static CLK_FIXED_FACTOR(pll_periph1_2x_clk, "pll-periph1-2x",
+			"pll-periph1", 1, 2, 0);
+static CLK_FIXED_FACTOR(pll_video0_2x_clk, "pll-video0-2x",
+			"pll-video0", 1, 2, 0);
+static CLK_FIXED_FACTOR(pll_video1_2x_clk, "pll-video1-2x",
+			"pll-video1", 1, 2, 0);
+
+static struct clk_hw_onecell_data sun8i_r40_hw_clks = {
+	.hws	= {
+		[CLK_OSC_12M]		= &osc12M_clk.hw,
+		[CLK_PLL_CPU]		= &pll_cpu_clk.common.hw,
+		[CLK_PLL_AUDIO_BASE]	= &pll_audio_base_clk.common.hw,
+		[CLK_PLL_AUDIO]		= &pll_audio_clk.hw,
+		[CLK_PLL_AUDIO_2X]	= &pll_audio_2x_clk.hw,
+		[CLK_PLL_AUDIO_4X]	= &pll_audio_4x_clk.hw,
+		[CLK_PLL_AUDIO_8X]	= &pll_audio_8x_clk.hw,
+		[CLK_PLL_VIDEO0]	= &pll_video0_clk.common.hw,
+		[CLK_PLL_VIDEO0_2X]	= &pll_video0_2x_clk.hw,
+		[CLK_PLL_VE]		= &pll_ve_clk.common.hw,
+		[CLK_PLL_DDR0]		= &pll_ddr0_clk.common.hw,
+		[CLK_PLL_PERIPH0]	= &pll_periph0_clk.common.hw,
+		[CLK_PLL_PERIPH0_SATA]	= &pll_periph0_sata_clk.common.hw,
+		[CLK_PLL_PERIPH0_2X]	= &pll_periph0_2x_clk.hw,
+		[CLK_PLL_PERIPH1]	= &pll_periph1_clk.common.hw,
+		[CLK_PLL_PERIPH1_2X]	= &pll_periph1_2x_clk.hw,
+		[CLK_PLL_VIDEO1]	= &pll_video1_clk.common.hw,
+		[CLK_PLL_VIDEO1_2X]	= &pll_video1_2x_clk.hw,
+		[CLK_PLL_SATA]		= &pll_sata_clk.common.hw,
+		[CLK_PLL_SATA_OUT]	= &pll_sata_out_clk.common.hw,
+		[CLK_PLL_GPU]		= &pll_gpu_clk.common.hw,
+		[CLK_PLL_MIPI]		= &pll_mipi_clk.common.hw,
+		[CLK_PLL_DE]		= &pll_de_clk.common.hw,
+		[CLK_PLL_DDR1]		= &pll_ddr1_clk.common.hw,
+		[CLK_CPU]		= &cpu_clk.common.hw,
+		[CLK_AXI]		= &axi_clk.common.hw,
+		[CLK_AHB1]		= &ahb1_clk.common.hw,
+		[CLK_APB1]		= &apb1_clk.common.hw,
+		[CLK_APB2]		= &apb2_clk.common.hw,
+		[CLK_BUS_MIPI_DSI]	= &bus_mipi_dsi_clk.common.hw,
+		[CLK_BUS_CE]		= &bus_ce_clk.common.hw,
+		[CLK_BUS_DMA]		= &bus_dma_clk.common.hw,
+		[CLK_BUS_MMC0]		= &bus_mmc0_clk.common.hw,
+		[CLK_BUS_MMC1]		= &bus_mmc1_clk.common.hw,
+		[CLK_BUS_MMC2]		= &bus_mmc2_clk.common.hw,
+		[CLK_BUS_MMC3]		= &bus_mmc3_clk.common.hw,
+		[CLK_BUS_NAND]		= &bus_nand_clk.common.hw,
+		[CLK_BUS_DRAM]		= &bus_dram_clk.common.hw,
+		[CLK_BUS_EMAC]		= &bus_emac_clk.common.hw,
+		[CLK_BUS_TS]		= &bus_ts_clk.common.hw,
+		[CLK_BUS_HSTIMER]	= &bus_hstimer_clk.common.hw,
+		[CLK_BUS_SPI0]		= &bus_spi0_clk.common.hw,
+		[CLK_BUS_SPI1]		= &bus_spi1_clk.common.hw,
+		[CLK_BUS_SPI2]		= &bus_spi2_clk.common.hw,
+		[CLK_BUS_SPI3]		= &bus_spi3_clk.common.hw,
+		[CLK_BUS_SATA]		= &bus_sata_clk.common.hw,
+		[CLK_BUS_OTG]		= &bus_otg_clk.common.hw,
+		[CLK_BUS_EHCI0]		= &bus_ehci0_clk.common.hw,
+		[CLK_BUS_EHCI1]		= &bus_ehci1_clk.common.hw,
+		[CLK_BUS_EHCI2]		= &bus_ehci2_clk.common.hw,
+		[CLK_BUS_OHCI0]		= &bus_ohci0_clk.common.hw,
+		[CLK_BUS_OHCI1]		= &bus_ohci1_clk.common.hw,
+		[CLK_BUS_OHCI2]		= &bus_ohci2_clk.common.hw,
+		[CLK_BUS_VE]		= &bus_ve_clk.common.hw,
+		[CLK_BUS_MP]		= &bus_mp_clk.common.hw,
+		[CLK_BUS_DEINTERLACE]	= &bus_deinterlace_clk.common.hw,
+		[CLK_BUS_CSI0]		= &bus_csi0_clk.common.hw,
+		[CLK_BUS_CSI1]		= &bus_csi1_clk.common.hw,
+		[CLK_BUS_HDMI0]		= &bus_hdmi0_clk.common.hw,
+		[CLK_BUS_HDMI1]		= &bus_hdmi1_clk.common.hw,
+		[CLK_BUS_DE]		= &bus_de_clk.common.hw,
+		[CLK_BUS_TVE0]		= &bus_tve0_clk.common.hw,
+		[CLK_BUS_TVE1]		= &bus_tve1_clk.common.hw,
+		[CLK_BUS_TVE_TOP]	= &bus_tve_top_clk.common.hw,
+		[CLK_BUS_GMAC]		= &bus_gmac_clk.common.hw,
+		[CLK_BUS_GPU]		= &bus_gpu_clk.common.hw,
+		[CLK_BUS_TVD0]		= &bus_tvd0_clk.common.hw,
+		[CLK_BUS_TVD1]		= &bus_tvd1_clk.common.hw,
+		[CLK_BUS_TVD2]		= &bus_tvd2_clk.common.hw,
+		[CLK_BUS_TVD3]		= &bus_tvd3_clk.common.hw,
+		[CLK_BUS_TVD_TOP]	= &bus_tvd_top_clk.common.hw,
+		[CLK_BUS_TCON_LCD0]	= &bus_tcon_lcd0_clk.common.hw,
+		[CLK_BUS_TCON_LCD1]	= &bus_tcon_lcd1_clk.common.hw,
+		[CLK_BUS_TCON_TV0]	= &bus_tcon_tv0_clk.common.hw,
+		[CLK_BUS_TCON_TV1]	= &bus_tcon_tv1_clk.common.hw,
+		[CLK_BUS_TCON_TOP]	= &bus_tcon_top_clk.common.hw,
+		[CLK_BUS_CODEC]		= &bus_codec_clk.common.hw,
+		[CLK_BUS_SPDIF]		= &bus_spdif_clk.common.hw,
+		[CLK_BUS_AC97]		= &bus_ac97_clk.common.hw,
+		[CLK_BUS_PIO]		= &bus_pio_clk.common.hw,
+		[CLK_BUS_IR0]		= &bus_ir0_clk.common.hw,
+		[CLK_BUS_IR1]		= &bus_ir1_clk.common.hw,
+		[CLK_BUS_THS]		= &bus_ths_clk.common.hw,
+		[CLK_BUS_KEYPAD]	= &bus_keypad_clk.common.hw,
+		[CLK_BUS_I2S0]		= &bus_i2s0_clk.common.hw,
+		[CLK_BUS_I2S1]		= &bus_i2s1_clk.common.hw,
+		[CLK_BUS_I2S2]		= &bus_i2s2_clk.common.hw,
+		[CLK_BUS_I2C0]		= &bus_i2c0_clk.common.hw,
+		[CLK_BUS_I2C1]		= &bus_i2c1_clk.common.hw,
+		[CLK_BUS_I2C2]		= &bus_i2c2_clk.common.hw,
+		[CLK_BUS_I2C3]		= &bus_i2c3_clk.common.hw,
+		[CLK_BUS_CAN]		= &bus_can_clk.common.hw,
+		[CLK_BUS_SCR]		= &bus_scr_clk.common.hw,
+		[CLK_BUS_PS20]		= &bus_ps20_clk.common.hw,
+		[CLK_BUS_PS21]		= &bus_ps21_clk.common.hw,
+		[CLK_BUS_I2C4]		= &bus_i2c4_clk.common.hw,
+		[CLK_BUS_UART0]		= &bus_uart0_clk.common.hw,
+		[CLK_BUS_UART1]		= &bus_uart1_clk.common.hw,
+		[CLK_BUS_UART2]		= &bus_uart2_clk.common.hw,
+		[CLK_BUS_UART3]		= &bus_uart3_clk.common.hw,
+		[CLK_BUS_UART4]		= &bus_uart4_clk.common.hw,
+		[CLK_BUS_UART5]		= &bus_uart5_clk.common.hw,
+		[CLK_BUS_UART6]		= &bus_uart6_clk.common.hw,
+		[CLK_BUS_UART7]		= &bus_uart7_clk.common.hw,
+		[CLK_BUS_DBG]		= &bus_dbg_clk.common.hw,
+		[CLK_THS]		= &ths_clk.common.hw,
+		[CLK_NAND]		= &nand_clk.common.hw,
+		[CLK_MMC0]		= &mmc0_clk.common.hw,
+		[CLK_MMC1]		= &mmc1_clk.common.hw,
+		[CLK_MMC2]		= &mmc2_clk.common.hw,
+		[CLK_MMC3]		= &mmc3_clk.common.hw,
+		[CLK_TS]		= &ts_clk.common.hw,
+		[CLK_CE]		= &ce_clk.common.hw,
+		[CLK_SPI0]		= &spi0_clk.common.hw,
+		[CLK_SPI1]		= &spi1_clk.common.hw,
+		[CLK_SPI2]		= &spi2_clk.common.hw,
+		[CLK_SPI3]		= &spi3_clk.common.hw,
+		[CLK_I2S0]		= &i2s0_clk.common.hw,
+		[CLK_I2S1]		= &i2s1_clk.common.hw,
+		[CLK_I2S2]		= &i2s2_clk.common.hw,
+		[CLK_AC97]		= &ac97_clk.common.hw,
+		[CLK_SPDIF]		= &spdif_clk.common.hw,
+		[CLK_KEYPAD]		= &keypad_clk.common.hw,
+		[CLK_SATA]		= &sata_clk.common.hw,
+		[CLK_USB_PHY0]		= &usb_phy0_clk.common.hw,
+		[CLK_USB_PHY1]		= &usb_phy1_clk.common.hw,
+		[CLK_USB_PHY2]		= &usb_phy2_clk.common.hw,
+		[CLK_USB_OHCI0]		= &usb_ohci0_clk.common.hw,
+		[CLK_USB_OHCI1]		= &usb_ohci1_clk.common.hw,
+		[CLK_USB_OHCI2]		= &usb_ohci2_clk.common.hw,
+		[CLK_IR0]		= &ir0_clk.common.hw,
+		[CLK_IR1]		= &ir1_clk.common.hw,
+		[CLK_DRAM]		= &dram_clk.common.hw,
+		[CLK_DRAM_VE]		= &dram_ve_clk.common.hw,
+		[CLK_DRAM_CSI0]		= &dram_csi0_clk.common.hw,
+		[CLK_DRAM_CSI1]		= &dram_csi1_clk.common.hw,
+		[CLK_DRAM_TS]		= &dram_ts_clk.common.hw,
+		[CLK_DRAM_TVD]		= &dram_tvd_clk.common.hw,
+		[CLK_DRAM_MP]		= &dram_mp_clk.common.hw,
+		[CLK_DRAM_DEINTERLACE]	= &dram_deinterlace_clk.common.hw,
+		[CLK_DE]		= &de_clk.common.hw,
+		[CLK_MP]		= &mp_clk.common.hw,
+		[CLK_TCON_LCD0]		= &tcon_lcd0_clk.common.hw,
+		[CLK_TCON_LCD1]		= &tcon_lcd1_clk.common.hw,
+		[CLK_TCON_TV0]		= &tcon_tv0_clk.common.hw,
+		[CLK_TCON_TV1]		= &tcon_tv1_clk.common.hw,
+		[CLK_DEINTERLACE]	= &deinterlace_clk.common.hw,
+		[CLK_CSI1_MCLK]		= &csi1_mclk_clk.common.hw,
+		[CLK_CSI_SCLK]		= &csi_sclk_clk.common.hw,
+		[CLK_CSI0_MCLK]		= &csi0_mclk_clk.common.hw,
+		[CLK_VE]		= &ve_clk.common.hw,
+		[CLK_CODEC]		= &codec_clk.common.hw,
+		[CLK_AVS]		= &avs_clk.common.hw,
+		[CLK_HDMI]		= &hdmi_clk.common.hw,
+		[CLK_HDMI_SLOW]		= &hdmi_slow_clk.common.hw,
+		[CLK_MBUS]		= &mbus_clk.common.hw,
+		[CLK_DSI_DPHY]		= &dsi_dphy_clk.common.hw,
+		[CLK_TVE0]		= &tve0_clk.common.hw,
+		[CLK_TVE1]		= &tve1_clk.common.hw,
+		[CLK_TVD0]		= &tvd0_clk.common.hw,
+		[CLK_TVD1]		= &tvd1_clk.common.hw,
+		[CLK_TVD2]		= &tvd2_clk.common.hw,
+		[CLK_TVD3]		= &tvd3_clk.common.hw,
+		[CLK_GPU]		= &gpu_clk.common.hw,
+		[CLK_OUTA]		= &outa_clk.common.hw,
+		[CLK_OUTB]		= &outb_clk.common.hw,
+	},
+	.num	= CLK_NUMBER,
+};
+
+static struct ccu_reset_map sun8i_r40_ccu_resets[] = {
+	[RST_USB_PHY0]		=  { 0x0cc, BIT(0) },
+	[RST_USB_PHY1]		=  { 0x0cc, BIT(1) },
+	[RST_USB_PHY2]		=  { 0x0cc, BIT(2) },
+
+	[RST_DRAM]		=  { 0x0f4, BIT(31) },
+	[RST_MBUS]		=  { 0x0fc, BIT(31) },
+
+	[RST_BUS_MIPI_DSI]	=  { 0x2c0, BIT(1) },
+	[RST_BUS_CE]		=  { 0x2c0, BIT(5) },
+	[RST_BUS_DMA]		=  { 0x2c0, BIT(6) },
+	[RST_BUS_MMC0]		=  { 0x2c0, BIT(8) },
+	[RST_BUS_MMC1]		=  { 0x2c0, BIT(9) },
+	[RST_BUS_MMC2]		=  { 0x2c0, BIT(10) },
+	[RST_BUS_MMC3]		=  { 0x2c0, BIT(11) },
+	[RST_BUS_NAND]		=  { 0x2c0, BIT(13) },
+	[RST_BUS_DRAM]		=  { 0x2c0, BIT(14) },
+	[RST_BUS_EMAC]		=  { 0x2c0, BIT(17) },
+	[RST_BUS_TS]		=  { 0x2c0, BIT(18) },
+	[RST_BUS_HSTIMER]	=  { 0x2c0, BIT(19) },
+	[RST_BUS_SPI0]		=  { 0x2c0, BIT(20) },
+	[RST_BUS_SPI1]		=  { 0x2c0, BIT(21) },
+	[RST_BUS_SPI2]		=  { 0x2c0, BIT(22) },
+	[RST_BUS_SPI3]		=  { 0x2c0, BIT(23) },
+	[RST_BUS_SATA]		=  { 0x2c0, BIT(24) },
+	[RST_BUS_OTG]		=  { 0x2c0, BIT(25) },
+	[RST_BUS_EHCI0]		=  { 0x2c0, BIT(26) },
+	[RST_BUS_EHCI1]		=  { 0x2c0, BIT(27) },
+	[RST_BUS_EHCI2]		=  { 0x2c0, BIT(28) },
+	[RST_BUS_OHCI0]		=  { 0x2c0, BIT(29) },
+	[RST_BUS_OHCI1]		=  { 0x2c0, BIT(30) },
+	[RST_BUS_OHCI2]		=  { 0x2c0, BIT(31) },
+
+	[RST_BUS_VE]		=  { 0x2c4, BIT(0) },
+	[RST_BUS_MP]		=  { 0x2c4, BIT(2) },
+	[RST_BUS_DEINTERLACE]	=  { 0x2c4, BIT(5) },
+	[RST_BUS_CSI0]		=  { 0x2c4, BIT(8) },
+	[RST_BUS_CSI1]		=  { 0x2c4, BIT(9) },
+	[RST_BUS_HDMI0]		=  { 0x2c4, BIT(10) },
+	[RST_BUS_HDMI1]		=  { 0x2c4, BIT(11) },
+	[RST_BUS_DE]		=  { 0x2c4, BIT(12) },
+	[RST_BUS_TVE0]		=  { 0x2c4, BIT(13) },
+	[RST_BUS_TVE1]		=  { 0x2c4, BIT(14) },
+	[RST_BUS_TVE_TOP]	=  { 0x2c4, BIT(15) },
+	[RST_BUS_GMAC]		=  { 0x2c4, BIT(17) },
+	[RST_BUS_GPU]		=  { 0x2c4, BIT(20) },
+	[RST_BUS_TVD0]		=  { 0x2c4, BIT(21) },
+	[RST_BUS_TVD1]		=  { 0x2c4, BIT(22) },
+	[RST_BUS_TVD2]		=  { 0x2c4, BIT(23) },
+	[RST_BUS_TVD3]		=  { 0x2c4, BIT(24) },
+	[RST_BUS_TVD_TOP]	=  { 0x2c4, BIT(25) },
+	[RST_BUS_TCON_LCD0]	=  { 0x2c4, BIT(26) },
+	[RST_BUS_TCON_LCD1]	=  { 0x2c4, BIT(27) },
+	[RST_BUS_TCON_TV0]	=  { 0x2c4, BIT(28) },
+	[RST_BUS_TCON_TV1]	=  { 0x2c4, BIT(29) },
+	[RST_BUS_TCON_TOP]	=  { 0x2c4, BIT(30) },
+	[RST_BUS_DBG]		=  { 0x2c4, BIT(31) },
+
+	[RST_BUS_LVDS]		=  { 0x2c8, BIT(0) },
+
+	[RST_BUS_CODEC]		=  { 0x2d0, BIT(0) },
+	[RST_BUS_SPDIF]		=  { 0x2d0, BIT(1) },
+	[RST_BUS_AC97]		=  { 0x2d0, BIT(2) },
+	[RST_BUS_IR0]		=  { 0x2d0, BIT(6) },
+	[RST_BUS_IR1]		=  { 0x2d0, BIT(7) },
+	[RST_BUS_THS]		=  { 0x2d0, BIT(8) },
+	[RST_BUS_KEYPAD]	=  { 0x2d0, BIT(10) },
+	[RST_BUS_I2S0]		=  { 0x2d0, BIT(12) },
+	[RST_BUS_I2S1]		=  { 0x2d0, BIT(13) },
+	[RST_BUS_I2S2]		=  { 0x2d0, BIT(14) },
+
+	[RST_BUS_I2C0]		=  { 0x2d8, BIT(0) },
+	[RST_BUS_I2C1]		=  { 0x2d8, BIT(1) },
+	[RST_BUS_I2C2]		=  { 0x2d8, BIT(2) },
+	[RST_BUS_I2C3]		=  { 0x2d8, BIT(3) },
+	[RST_BUS_CAN]		=  { 0x2d8, BIT(4) },
+	[RST_BUS_SCR]		=  { 0x2d8, BIT(5) },
+	[RST_BUS_PS20]		=  { 0x2d8, BIT(6) },
+	[RST_BUS_PS21]		=  { 0x2d8, BIT(7) },
+	[RST_BUS_I2C4]		=  { 0x2d8, BIT(15) },
+	[RST_BUS_UART0]		=  { 0x2d8, BIT(16) },
+	[RST_BUS_UART1]		=  { 0x2d8, BIT(17) },
+	[RST_BUS_UART2]		=  { 0x2d8, BIT(18) },
+	[RST_BUS_UART3]		=  { 0x2d8, BIT(19) },
+	[RST_BUS_UART4]		=  { 0x2d8, BIT(20) },
+	[RST_BUS_UART5]		=  { 0x2d8, BIT(21) },
+	[RST_BUS_UART6]		=  { 0x2d8, BIT(22) },
+	[RST_BUS_UART7]		=  { 0x2d8, BIT(23) },
+};
+
+static const struct sunxi_ccu_desc sun8i_r40_ccu_desc = {
+	.ccu_clks	= sun8i_r40_ccu_clks,
+	.num_ccu_clks	= ARRAY_SIZE(sun8i_r40_ccu_clks),
+
+	.hw_clks	= &sun8i_r40_hw_clks,
+
+	.resets		= sun8i_r40_ccu_resets,
+	.num_resets	= ARRAY_SIZE(sun8i_r40_ccu_resets),
+};
+
+static struct ccu_pll_nb sun8i_r40_pll_cpu_nb = {
+	.common	= &pll_cpu_clk.common,
+	/* copy from pll_cpu_clk */
+	.enable	= BIT(31),
+	.lock	= BIT(28),
+};
+
+static struct ccu_mux_nb sun8i_r40_cpu_nb = {
+	.common		= &cpu_clk.common,
+	.cm		= &cpu_clk.mux,
+	.delay_us	= 1, /* > 8 clock cycles at 24 MHz */
+	.bypass_index	= 1, /* index of 24 MHz oscillator */
+};
+
+static void __init sun8i_r40_ccu_setup(struct device_node *node)
+{
+	void __iomem *reg;
+	u32 val;
+
+	reg = of_io_request_and_map(node, 0, of_node_full_name(node));
+	if (IS_ERR(reg)) {
+		pr_err("%s: Could not map the clock registers\n",
+		       of_node_full_name(node));
+		return;
+	}
+
+	/* Force the PLL-Audio-1x divider to 4 */
+	val = readl(reg + SUN8I_R40_PLL_AUDIO_REG);
+	val &= ~GENMASK(19, 16);
+	writel(val | (3 << 16), reg + SUN8I_R40_PLL_AUDIO_REG);
+
+	/* Force PLL-MIPI to MIPI mode */
+	val = readl(reg + SUN8I_R40_PLL_MIPI_REG);
+	val &= ~BIT(16);
+	writel(val, reg + SUN8I_R40_PLL_MIPI_REG);
+
+	/* Force OHCI 12M parent to 12M divided from 48M */
+	val = readl(reg + SUN8I_R40_USB_CLK_REG);
+	val &= ~GENMASK(25, 20);
+	writel(val, reg + SUN8I_R40_USB_CLK_REG);
+
+	sunxi_ccu_probe(node, reg, &sun8i_r40_ccu_desc);
+
+	/* Gate then ungate PLL CPU after any rate changes */
+	ccu_pll_notifier_register(&sun8i_r40_pll_cpu_nb);
+
+	/* Reparent CPU during PLL CPU rate changes */
+	ccu_mux_notifier_register(pll_cpu_clk.common.hw.clk,
+				  &sun8i_r40_cpu_nb);
+}
+CLK_OF_DECLARE(sun8i_r40_ccu, "allwinner,sun8i-r40-ccu",
+	       sun8i_r40_ccu_setup);
diff --git a/drivers/clk/sunxi-ng/ccu-sun8i-r40.h b/drivers/clk/sunxi-ng/ccu-sun8i-r40.h
new file mode 100644
index 000000000000..0db8e1e97af8
--- /dev/null
+++ b/drivers/clk/sunxi-ng/ccu-sun8i-r40.h
@@ -0,0 +1,69 @@
+/*
+ * Copyright 2017 Icenowy Zheng <icenowy@aosc.io>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _CCU_SUN8I_R40_H_
+#define _CCU_SUN8I_R40_H_
+
+#include <dt-bindings/clock/sun8i-r40-ccu.h>
+#include <dt-bindings/reset/sun8i-r40-ccu.h>
+
+#define CLK_OSC_12M		0
+#define CLK_PLL_CPU		1
+#define CLK_PLL_AUDIO_BASE	2
+#define CLK_PLL_AUDIO		3
+#define CLK_PLL_AUDIO_2X	4
+#define CLK_PLL_AUDIO_4X	5
+#define CLK_PLL_AUDIO_8X	6
+#define CLK_PLL_VIDEO0		7
+#define CLK_PLL_VIDEO0_2X	8
+#define CLK_PLL_VE		9
+#define CLK_PLL_DDR0		10
+#define CLK_PLL_PERIPH0		11
+#define CLK_PLL_PERIPH0_SATA	12
+#define CLK_PLL_PERIPH0_2X	13
+#define CLK_PLL_PERIPH1		14
+#define CLK_PLL_PERIPH1_2X	15
+#define CLK_PLL_VIDEO1		16
+#define CLK_PLL_VIDEO1_2X	17
+#define CLK_PLL_SATA		18
+#define CLK_PLL_SATA_OUT	19
+#define CLK_PLL_GPU		20
+#define CLK_PLL_MIPI		21
+#define CLK_PLL_DE		22
+#define CLK_PLL_DDR1		23
+
+/* The CPU clock is exported */
+
+#define CLK_AXI			25
+#define CLK_AHB1		26
+#define CLK_APB1		27
+#define CLK_APB2		28
+
+/* All the bus gates are exported */
+
+/* The first bunch of module clocks are exported */
+
+#define CLK_DRAM		132
+
+/* All the DRAM gates are exported */
+
+/* Some more module clocks are exported */
+
+#define CLK_MBUS		155
+
+/* Another bunch of module clocks are exported */
+
+#define CLK_NUMBER		(CLK_OUTB + 1)
+
+#endif /* _CCU_SUN8I_R40_H_ */
diff --git a/include/dt-bindings/clock/sun8i-r40-ccu.h b/include/dt-bindings/clock/sun8i-r40-ccu.h
new file mode 100644
index 000000000000..4fa5f69fc297
--- /dev/null
+++ b/include/dt-bindings/clock/sun8i-r40-ccu.h
@@ -0,0 +1,187 @@
+/*
+ * Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.io>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#ifndef _DT_BINDINGS_CLK_SUN8I_R40_H_
+#define _DT_BINDINGS_CLK_SUN8I_R40_H_
+
+#define CLK_CPU			24
+
+#define CLK_BUS_MIPI_DSI	29
+#define CLK_BUS_CE		30
+#define CLK_BUS_DMA		31
+#define CLK_BUS_MMC0		32
+#define CLK_BUS_MMC1		33
+#define CLK_BUS_MMC2		34
+#define CLK_BUS_MMC3		35
+#define CLK_BUS_NAND		36
+#define CLK_BUS_DRAM		37
+#define CLK_BUS_EMAC		38
+#define CLK_BUS_TS		39
+#define CLK_BUS_HSTIMER		40
+#define CLK_BUS_SPI0		41
+#define CLK_BUS_SPI1		42
+#define CLK_BUS_SPI2		43
+#define CLK_BUS_SPI3		44
+#define CLK_BUS_SATA		45
+#define CLK_BUS_OTG		46
+#define CLK_BUS_EHCI0		47
+#define CLK_BUS_EHCI1		48
+#define CLK_BUS_EHCI2		49
+#define CLK_BUS_OHCI0		50
+#define CLK_BUS_OHCI1		51
+#define CLK_BUS_OHCI2		52
+#define CLK_BUS_VE		53
+#define CLK_BUS_MP		54
+#define CLK_BUS_DEINTERLACE	55
+#define CLK_BUS_CSI0		56
+#define CLK_BUS_CSI1		57
+#define CLK_BUS_HDMI1		58
+#define CLK_BUS_HDMI0		59
+#define CLK_BUS_DE		60
+#define CLK_BUS_TVE0		61
+#define CLK_BUS_TVE1		62
+#define CLK_BUS_TVE_TOP		63
+#define CLK_BUS_GMAC		64
+#define CLK_BUS_GPU		65
+#define CLK_BUS_TVD0		66
+#define CLK_BUS_TVD1		67
+#define CLK_BUS_TVD2		68
+#define CLK_BUS_TVD3		69
+#define CLK_BUS_TVD_TOP		70
+#define CLK_BUS_TCON_LCD0	71
+#define CLK_BUS_TCON_LCD1	72
+#define CLK_BUS_TCON_TV0	73
+#define CLK_BUS_TCON_TV1	74
+#define CLK_BUS_TCON_TOP	75
+#define CLK_BUS_CODEC		76
+#define CLK_BUS_SPDIF		77
+#define CLK_BUS_AC97		78
+#define CLK_BUS_PIO		79
+#define CLK_BUS_IR0		80
+#define CLK_BUS_IR1		81
+#define CLK_BUS_THS		82
+#define CLK_BUS_KEYPAD		83
+#define CLK_BUS_I2S0		84
+#define CLK_BUS_I2S1		85
+#define CLK_BUS_I2S2		86
+#define CLK_BUS_I2C0		87
+#define CLK_BUS_I2C1		88
+#define CLK_BUS_I2C2		89
+#define CLK_BUS_I2C3		90
+#define CLK_BUS_CAN		91
+#define CLK_BUS_SCR		92
+#define CLK_BUS_PS20		93
+#define CLK_BUS_PS21		94
+#define CLK_BUS_I2C4		95
+#define CLK_BUS_UART0		96
+#define CLK_BUS_UART1		97
+#define CLK_BUS_UART2		98
+#define CLK_BUS_UART3		99
+#define CLK_BUS_UART4		100
+#define CLK_BUS_UART5		101
+#define CLK_BUS_UART6		102
+#define CLK_BUS_UART7		103
+#define CLK_BUS_DBG		104
+
+#define CLK_THS			105
+#define CLK_NAND		106
+#define CLK_MMC0		107
+#define CLK_MMC1		108
+#define CLK_MMC2		109
+#define CLK_MMC3		110
+#define CLK_TS			111
+#define CLK_CE			112
+#define CLK_SPI0		113
+#define CLK_SPI1		114
+#define CLK_SPI2		115
+#define CLK_SPI3		116
+#define CLK_I2S0		117
+#define CLK_I2S1		118
+#define CLK_I2S2		119
+#define CLK_AC97		120
+#define CLK_SPDIF		121
+#define CLK_KEYPAD		122
+#define CLK_SATA		123
+#define CLK_USB_PHY0		124
+#define CLK_USB_PHY1		125
+#define CLK_USB_PHY2		126
+#define CLK_USB_OHCI0		127
+#define CLK_USB_OHCI1		128
+#define CLK_USB_OHCI2		129
+#define CLK_IR0			130
+#define CLK_IR1			131
+
+#define CLK_DRAM_VE		133
+#define CLK_DRAM_CSI0		134
+#define CLK_DRAM_CSI1		135
+#define CLK_DRAM_TS		136
+#define CLK_DRAM_TVD		137
+#define CLK_DRAM_MP		138
+#define CLK_DRAM_DEINTERLACE	139
+#define CLK_DE			140
+#define CLK_MP			141
+#define CLK_TCON_LCD0		142
+#define CLK_TCON_LCD1		143
+#define CLK_TCON_TV0		144
+#define CLK_TCON_TV1		145
+#define CLK_DEINTERLACE		146
+#define CLK_CSI1_MCLK		147
+#define CLK_CSI_SCLK		148
+#define CLK_CSI0_MCLK		149
+#define CLK_VE			150
+#define CLK_CODEC		151
+#define CLK_AVS			152
+#define CLK_HDMI		153
+#define CLK_HDMI_SLOW		154
+
+#define CLK_DSI_DPHY		156
+#define CLK_TVE0		157
+#define CLK_TVE1		158
+#define CLK_TVD0		159
+#define CLK_TVD1		160
+#define CLK_TVD2		161
+#define CLK_TVD3		162
+#define CLK_GPU			163
+#define CLK_OUTA		164
+#define CLK_OUTB		165
+
+#endif /* _DT_BINDINGS_CLK_SUN8I_R40_H_ */
diff --git a/include/dt-bindings/reset/sun8i-r40-ccu.h b/include/dt-bindings/reset/sun8i-r40-ccu.h
new file mode 100644
index 000000000000..c5ebcf6672e4
--- /dev/null
+++ b/include/dt-bindings/reset/sun8i-r40-ccu.h
@@ -0,0 +1,130 @@
+/*
+ * Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.io>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#ifndef _DT_BINDINGS_RST_SUN8I_R40_H_
+#define _DT_BINDINGS_RST_SUN8I_R40_H_
+
+#define RST_USB_PHY0		0
+#define RST_USB_PHY1		1
+#define RST_USB_PHY2		2
+
+#define RST_DRAM		3
+#define RST_MBUS		4
+
+#define RST_BUS_MIPI_DSI	5
+#define RST_BUS_CE		6
+#define RST_BUS_DMA		7
+#define RST_BUS_MMC0		8
+#define RST_BUS_MMC1		9
+#define RST_BUS_MMC2		10
+#define RST_BUS_MMC3		11
+#define RST_BUS_NAND		12
+#define RST_BUS_DRAM		13
+#define RST_BUS_EMAC		14
+#define RST_BUS_TS		15
+#define RST_BUS_HSTIMER		16
+#define RST_BUS_SPI0		17
+#define RST_BUS_SPI1		18
+#define RST_BUS_SPI2		19
+#define RST_BUS_SPI3		20
+#define RST_BUS_SATA		21
+#define RST_BUS_OTG		22
+#define RST_BUS_EHCI0		23
+#define RST_BUS_EHCI1		24
+#define RST_BUS_EHCI2		25
+#define RST_BUS_OHCI0		26
+#define RST_BUS_OHCI1		27
+#define RST_BUS_OHCI2		28
+#define RST_BUS_VE		29
+#define RST_BUS_MP		30
+#define RST_BUS_DEINTERLACE	31
+#define RST_BUS_CSI0		32
+#define RST_BUS_CSI1		33
+#define RST_BUS_HDMI0		34
+#define RST_BUS_HDMI1		35
+#define RST_BUS_DE		36
+#define RST_BUS_TVE0		37
+#define RST_BUS_TVE1		38
+#define RST_BUS_TVE_TOP		39
+#define RST_BUS_GMAC		40
+#define RST_BUS_GPU		41
+#define RST_BUS_TVD0		42
+#define RST_BUS_TVD1		43
+#define RST_BUS_TVD2		44
+#define RST_BUS_TVD3		45
+#define RST_BUS_TVD_TOP		46
+#define RST_BUS_TCON_LCD0	47
+#define RST_BUS_TCON_LCD1	48
+#define RST_BUS_TCON_TV0	49
+#define RST_BUS_TCON_TV1	50
+#define RST_BUS_TCON_TOP	51
+#define RST_BUS_DBG		52
+#define RST_BUS_LVDS		53
+#define RST_BUS_CODEC		54
+#define RST_BUS_SPDIF		55
+#define RST_BUS_AC97		56
+#define RST_BUS_IR0		57
+#define RST_BUS_IR1		58
+#define RST_BUS_THS		59
+#define RST_BUS_KEYPAD		60
+#define RST_BUS_I2S0		61
+#define RST_BUS_I2S1		62
+#define RST_BUS_I2S2		63
+#define RST_BUS_I2C0		64
+#define RST_BUS_I2C1		65
+#define RST_BUS_I2C2		66
+#define RST_BUS_I2C3		67
+#define RST_BUS_CAN		68
+#define RST_BUS_SCR		69
+#define RST_BUS_PS20		70
+#define RST_BUS_PS21		71
+#define RST_BUS_I2C4		72
+#define RST_BUS_UART0		73
+#define RST_BUS_UART1		74
+#define RST_BUS_UART2		75
+#define RST_BUS_UART3		76
+#define RST_BUS_UART4		77
+#define RST_BUS_UART5		78
+#define RST_BUS_UART6		79
+#define RST_BUS_UART7		80
+
+#endif /* _DT_BINDINGS_RST_SUN8I_R40_H_ */
-- 
cgit v1.2.3


From 9762e7ff163213e18ed8e7cc723d74b54bf9cb98 Mon Sep 17 00:00:00 2001
From: Elaine Zhang <zhangqing@rock-chips.com>
Date: Fri, 18 Aug 2017 11:49:24 +0800
Subject: clk: rockchip: add rk3228 sclk_sdio_src ID

This patch exports sdio src clock for dts reference.

Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
---
 include/dt-bindings/clock/rk3228-cru.h | 1 +
 1 file changed, 1 insertion(+)

diff --git a/include/dt-bindings/clock/rk3228-cru.h b/include/dt-bindings/clock/rk3228-cru.h
index 56f841c22801..55655ab0a4c4 100644
--- a/include/dt-bindings/clock/rk3228-cru.h
+++ b/include/dt-bindings/clock/rk3228-cru.h
@@ -49,6 +49,7 @@
 #define SCLK_EMMC_DRV		117
 #define SCLK_SDMMC_SAMPLE	118
 #define SCLK_SDIO_SAMPLE	119
+#define SCLK_SDIO_SRC		120
 #define SCLK_EMMC_SAMPLE	121
 #define SCLK_VOP		122
 #define SCLK_HDMI_HDCP		123
-- 
cgit v1.2.3


From 1858698e0ac63f4fd3a633064893b5fd6ef8aa8d Mon Sep 17 00:00:00 2001
From: Elaine Zhang <zhangqing@rock-chips.com>
Date: Mon, 21 Aug 2017 16:16:04 +0800
Subject: clk: rockchip: add rv1108 ACLK_GAMC and PCLK_GMAC ID

This patch exports gmac aclk and pclk for dts reference.

Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Reviewed-by: David Wu <david.wu@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
---
 include/dt-bindings/clock/rv1108-cru.h | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/include/dt-bindings/clock/rv1108-cru.h b/include/dt-bindings/clock/rv1108-cru.h
index f269d833e41a..2239ae2a19b9 100644
--- a/include/dt-bindings/clock/rv1108-cru.h
+++ b/include/dt-bindings/clock/rv1108-cru.h
@@ -110,6 +110,7 @@
 #define ACLK_CIF2			207
 #define ACLK_CIF3			208
 #define ACLK_PERI			209
+#define ACLK_GMAC			210
 
 /* pclk gates */
 #define PCLK_GPIO1			256
@@ -141,6 +142,7 @@
 #define PCLK_EFUSE0			282
 #define PCLK_EFUSE1			283
 #define PCLK_WDT			284
+#define PCLK_GMAC			285
 
 /* hclk gates */
 #define HCLK_I2S0_8CH			320
-- 
cgit v1.2.3


From fe53230cf22644e187d688f65e295ad61d9169cf Mon Sep 17 00:00:00 2001
From: Elaine Zhang <zhangqing@rock-chips.com>
Date: Fri, 18 Aug 2017 11:49:25 +0800
Subject: clk: rockchip: add rk3228 SCLK_SDIO_SRC clk id

In some special circumstances, may be need to reparent clk for sclk_sdio_src.

Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
---
 drivers/clk/rockchip/clk-rk3228.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/clk/rockchip/clk-rk3228.c b/drivers/clk/rockchip/clk-rk3228.c
index bb405d9044a3..11e7f2d1c054 100644
--- a/drivers/clk/rockchip/clk-rk3228.c
+++ b/drivers/clk/rockchip/clk-rk3228.c
@@ -391,7 +391,7 @@ static struct rockchip_clk_branch rk3228_clk_branches[] __initdata = {
 			RK2928_CLKSEL_CON(11), 8, 2, MFLAGS, 0, 8, DFLAGS,
 			RK2928_CLKGATE_CON(2), 11, GFLAGS),
 
-	COMPOSITE_NODIV(0, "sclk_sdio_src", mux_mmc_src_p, 0,
+	COMPOSITE_NODIV(SCLK_SDIO_SRC, "sclk_sdio_src", mux_mmc_src_p, 0,
 			RK2928_CLKSEL_CON(11), 10, 2, MFLAGS,
 			RK2928_CLKGATE_CON(2), 13, GFLAGS),
 	DIV(SCLK_SDIO, "sclk_sdio", "sclk_sdio_src", 0,
-- 
cgit v1.2.3


From 100542725f605d4399536eb162c036977996b5cc Mon Sep 17 00:00:00 2001
From: Elaine Zhang <zhangqing@rock-chips.com>
Date: Mon, 21 Aug 2017 16:16:05 +0800
Subject: clk: rockchip: add rv1108 ACLK_GMAC and PCLK_GMAC clocks

Add gmac aclk and pclk clock gates.

Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Reviewed-by: David Wu <david.wu@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
---
 drivers/clk/rockchip/clk-rv1108.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/clk/rockchip/clk-rv1108.c b/drivers/clk/rockchip/clk-rv1108.c
index d1065dd9f442..0e441ec21e90 100644
--- a/drivers/clk/rockchip/clk-rv1108.c
+++ b/drivers/clk/rockchip/clk-rv1108.c
@@ -763,6 +763,8 @@ static struct rockchip_clk_branch rv1108_clk_branches[] __initdata = {
 	GATE(SCLK_MACPHY_RX, "sclk_macphy_rx", "sclk_macphy", 0, RV1108_CLKGATE_CON(4), 8, GFLAGS),
 	GATE(SCLK_MAC_REF, "sclk_mac_ref", "sclk_macphy", 0, RV1108_CLKGATE_CON(4), 6, GFLAGS),
 	GATE(SCLK_MAC_REFOUT, "sclk_mac_refout", "sclk_macphy", 0, RV1108_CLKGATE_CON(4), 7, GFLAGS),
+	GATE(ACLK_GMAC, "aclk_gmac", "aclk_periph", 0, RV1108_CLKGATE_CON(15), 4, GFLAGS),
+	GATE(PCLK_GMAC, "pclk_gmac", "pclk_periph", 0, RV1108_CLKGATE_CON(15), 5, GFLAGS),
 
 	MMC(SCLK_SDMMC_DRV,    "sdmmc_drv",    "sclk_sdmmc", RV1108_SDMMC_CON0, 1),
 	MMC(SCLK_SDMMC_SAMPLE, "sdmmc_sample", "sclk_sdmmc", RV1108_SDMMC_CON1, 1),
-- 
cgit v1.2.3


From c7d0045b08a36c2fb7874efc48d747613c6a1ccf Mon Sep 17 00:00:00 2001
From: Elaine Zhang <zhangqing@rock-chips.com>
Date: Mon, 21 Aug 2017 16:16:06 +0800
Subject: clk: rockchip: rename rv1108 macphy clock to mac

This MAC has no internal phy for rv1108 and the whole clock
infrastructure hasn't been used yet, so is safe to fix.

Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Reviewed-by: David Wu <david.wu@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
---
 drivers/clk/rockchip/clk-rv1108.c      | 12 ++++++------
 include/dt-bindings/clock/rv1108-cru.h |  6 +++---
 2 files changed, 9 insertions(+), 9 deletions(-)

diff --git a/drivers/clk/rockchip/clk-rv1108.c b/drivers/clk/rockchip/clk-rv1108.c
index 0e441ec21e90..c9045f85b498 100644
--- a/drivers/clk/rockchip/clk-rv1108.c
+++ b/drivers/clk/rockchip/clk-rv1108.c
@@ -140,7 +140,7 @@ PNAME(mux_pll_src_dpll_gpll_usb480m_p)	= { "dpll", "gpll", "usb480m" };
 PNAME(mux_uart0_p)		= { "uart0_src", "uart0_frac", "xin24m" };
 PNAME(mux_uart1_p)		= { "uart1_src", "uart1_frac", "xin24m" };
 PNAME(mux_uart2_p)		= { "uart2_src", "uart2_frac", "xin24m" };
-PNAME(mux_sclk_macphy_p)	= { "ext_gmac", "sclk_macphy_pre" };
+PNAME(mux_sclk_mac_p)		= { "ext_gmac", "sclk_mac_pre" };
 PNAME(mux_i2s0_pre_p)		= { "i2s0_src", "i2s0_frac", "ext_i2s", "xin12m" };
 PNAME(mux_i2s_out_p)		= { "i2s0_pre", "xin12m" };
 PNAME(mux_i2s1_p)		= { "i2s1_src", "i2s1_frac", "dummy", "xin12m" };
@@ -755,14 +755,14 @@ static struct rockchip_clk_branch rv1108_clk_branches[] __initdata = {
 			RV1108_CLKGATE_CON(5), 4, GFLAGS),
 	GATE(HCLK_SFC, "hclk_sfc", "hclk_periph", 0, RV1108_CLKGATE_CON(15), 10, GFLAGS),
 
-	COMPOSITE(SCLK_MACPHY_PRE, "sclk_macphy_pre", mux_pll_src_apll_gpll_p, 0,
+	COMPOSITE(SCLK_MAC_PRE, "sclk_mac_pre", mux_pll_src_apll_gpll_p, 0,
 			RV1108_CLKSEL_CON(24), 12, 1, MFLAGS, 0, 5, DFLAGS,
 			RV1108_CLKGATE_CON(4), 10, GFLAGS),
-	MUX(SCLK_MACPHY, "sclk_macphy", mux_sclk_macphy_p, CLK_SET_RATE_PARENT,
+	MUX(SCLK_MAC, "sclk_mac", mux_sclk_mac_p, CLK_SET_RATE_PARENT,
 			RV1108_CLKSEL_CON(24), 8, 1, MFLAGS),
-	GATE(SCLK_MACPHY_RX, "sclk_macphy_rx", "sclk_macphy", 0, RV1108_CLKGATE_CON(4), 8, GFLAGS),
-	GATE(SCLK_MAC_REF, "sclk_mac_ref", "sclk_macphy", 0, RV1108_CLKGATE_CON(4), 6, GFLAGS),
-	GATE(SCLK_MAC_REFOUT, "sclk_mac_refout", "sclk_macphy", 0, RV1108_CLKGATE_CON(4), 7, GFLAGS),
+	GATE(SCLK_MAC_RX, "sclk_mac_rx", "sclk_mac", 0, RV1108_CLKGATE_CON(4), 8, GFLAGS),
+	GATE(SCLK_MAC_REF, "sclk_mac_ref", "sclk_mac", 0, RV1108_CLKGATE_CON(4), 6, GFLAGS),
+	GATE(SCLK_MAC_REFOUT, "sclk_mac_refout", "sclk_mac", 0, RV1108_CLKGATE_CON(4), 7, GFLAGS),
 	GATE(ACLK_GMAC, "aclk_gmac", "aclk_periph", 0, RV1108_CLKGATE_CON(15), 4, GFLAGS),
 	GATE(PCLK_GMAC, "pclk_gmac", "pclk_periph", 0, RV1108_CLKGATE_CON(15), 5, GFLAGS),
 
diff --git a/include/dt-bindings/clock/rv1108-cru.h b/include/dt-bindings/clock/rv1108-cru.h
index 2239ae2a19b9..d8d0e0456dc2 100644
--- a/include/dt-bindings/clock/rv1108-cru.h
+++ b/include/dt-bindings/clock/rv1108-cru.h
@@ -67,9 +67,9 @@
 #define SCLK_SPI			108
 #define SCLK_SARADC			109
 #define SCLK_TSADC			110
-#define SCLK_MACPHY_PRE			111
-#define SCLK_MACPHY			112
-#define SCLK_MACPHY_RX			113
+#define SCLK_MAC_PRE			111
+#define SCLK_MAC			112
+#define SCLK_MAC_RX			113
 #define SCLK_MAC_REF			114
 #define SCLK_MAC_REFOUT			115
 #define SCLK_DSP_PFM			116
-- 
cgit v1.2.3


From 64a1644bc3baa62b769455d811b7999b9a1c6cd1 Mon Sep 17 00:00:00 2001
From: Elaine Zhang <zhangqing@rock-chips.com>
Date: Mon, 21 Aug 2017 16:16:07 +0800
Subject: clk: rockchip: fix the rv1108 clk_mac sel register description

The source clock ordering is wrong, as shown in the TRM:
cru_sel24_con[8]
rmii_extclk_sel
clock source select control register
1'b0: from internal PLL
1'b1: from external IO

Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Reviewed-by: David Wu <david.wu@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
---
 drivers/clk/rockchip/clk-rv1108.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/clk/rockchip/clk-rv1108.c b/drivers/clk/rockchip/clk-rv1108.c
index c9045f85b498..089cb17925e5 100644
--- a/drivers/clk/rockchip/clk-rv1108.c
+++ b/drivers/clk/rockchip/clk-rv1108.c
@@ -140,7 +140,7 @@ PNAME(mux_pll_src_dpll_gpll_usb480m_p)	= { "dpll", "gpll", "usb480m" };
 PNAME(mux_uart0_p)		= { "uart0_src", "uart0_frac", "xin24m" };
 PNAME(mux_uart1_p)		= { "uart1_src", "uart1_frac", "xin24m" };
 PNAME(mux_uart2_p)		= { "uart2_src", "uart2_frac", "xin24m" };
-PNAME(mux_sclk_mac_p)		= { "ext_gmac", "sclk_mac_pre" };
+PNAME(mux_sclk_mac_p)		= { "sclk_mac_pre", "ext_gmac" };
 PNAME(mux_i2s0_pre_p)		= { "i2s0_src", "i2s0_frac", "ext_i2s", "xin12m" };
 PNAME(mux_i2s_out_p)		= { "i2s0_pre", "xin12m" };
 PNAME(mux_i2s1_p)		= { "i2s1_src", "i2s1_frac", "dummy", "xin12m" };
-- 
cgit v1.2.3


From 1dfcfa721f9390ed5fd1e9c48e9fd6e8208a4963 Mon Sep 17 00:00:00 2001
From: Stephen Boyd <sboyd@codeaurora.org>
Date: Wed, 23 Aug 2017 15:35:41 -0700
Subject: clk: rockchip: Mark rockchip_fractional_approximation static

Silence the sparse warning

clk/rockchip/clk.c:172:6: warning: symbol 'rockchip_fractional_approximation' was not declared. Should it be static?

Cc: Elaine Zhang <zhangqing@rock-chips.com>
Cc: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
---
 drivers/clk/rockchip/clk.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/clk/rockchip/clk.c b/drivers/clk/rockchip/clk.c
index b6db79a00602..35dbd63c2f49 100644
--- a/drivers/clk/rockchip/clk.c
+++ b/drivers/clk/rockchip/clk.c
@@ -169,7 +169,7 @@ static int rockchip_clk_frac_notifier_cb(struct notifier_block *nb,
  * fractional divider must set that denominator is 20 times larger than
  * numerator to generate precise clock frequency.
  */
-void rockchip_fractional_approximation(struct clk_hw *hw,
+static void rockchip_fractional_approximation(struct clk_hw *hw,
 		unsigned long rate, unsigned long *parent_rate,
 		unsigned long *m, unsigned long *n)
 {
-- 
cgit v1.2.3


From 7cc566a821a0e0999209a256b80375d08db2840c Mon Sep 17 00:00:00 2001
From: Bhumika Goyal <bhumirks@gmail.com>
Date: Tue, 22 Aug 2017 18:41:15 +0530
Subject: clk: ti: make clk_ops const

Make these const as they are only stored in the const field of a
clk_init_data structure.

Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Acked-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
---
 drivers/clk/ti/adpll.c | 2 +-
 drivers/clk/ti/apll.c  | 2 +-
 drivers/clk/ti/fapll.c | 4 ++--
 3 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/clk/ti/adpll.c b/drivers/clk/ti/adpll.c
index 255cafb18336..d5c6db446316 100644
--- a/drivers/clk/ti/adpll.c
+++ b/drivers/clk/ti/adpll.c
@@ -486,7 +486,7 @@ static u8 ti_adpll_get_parent(struct clk_hw *hw)
 	return 0;
 }
 
-static struct clk_ops ti_adpll_ops = {
+static const struct clk_ops ti_adpll_ops = {
 	.prepare = ti_adpll_prepare,
 	.unprepare = ti_adpll_unprepare,
 	.is_prepared = ti_adpll_is_prepared,
diff --git a/drivers/clk/ti/apll.c b/drivers/clk/ti/apll.c
index 06f486b3488c..83b148f8037c 100644
--- a/drivers/clk/ti/apll.c
+++ b/drivers/clk/ti/apll.c
@@ -304,7 +304,7 @@ static void omap2_apll_disable(struct clk_hw *hw)
 	ti_clk_ll_ops->clk_writel(v, &ad->control_reg);
 }
 
-static struct clk_ops omap2_apll_ops = {
+static const struct clk_ops omap2_apll_ops = {
 	.enable		= &omap2_apll_enable,
 	.disable	= &omap2_apll_disable,
 	.is_enabled	= &omap2_apll_is_enabled,
diff --git a/drivers/clk/ti/fapll.c b/drivers/clk/ti/fapll.c
index 66a0d0ed8b55..071af44b1ba8 100644
--- a/drivers/clk/ti/fapll.c
+++ b/drivers/clk/ti/fapll.c
@@ -268,7 +268,7 @@ static int ti_fapll_set_rate(struct clk_hw *hw, unsigned long rate,
 	return 0;
 }
 
-static struct clk_ops ti_fapll_ops = {
+static const struct clk_ops ti_fapll_ops = {
 	.enable = ti_fapll_enable,
 	.disable = ti_fapll_disable,
 	.is_enabled = ti_fapll_is_enabled,
@@ -478,7 +478,7 @@ static int ti_fapll_synth_set_rate(struct clk_hw *hw, unsigned long rate,
 	return 0;
 }
 
-static struct clk_ops ti_fapll_synt_ops = {
+static const struct clk_ops ti_fapll_synt_ops = {
 	.enable = ti_fapll_synth_enable,
 	.disable = ti_fapll_synth_disable,
 	.is_enabled = ti_fapll_synth_is_enabled,
-- 
cgit v1.2.3


From de2245540ed84c56ba3d71d1ce8e14fdaf332720 Mon Sep 17 00:00:00 2001
From: Georgi Djakov <georgi.djakov@linaro.org>
Date: Fri, 18 Aug 2017 17:22:50 +0300
Subject: clk: qcom: msm8916: Fix bimc gpu clock ops

The clock bimc_gpu_clk_src is incorrectly set to use the shared rcg2
ops, which are for RCGs with child branches controlled by different
CPUs.

The result of the incorrect ops is that the GPU's PM runtime may leave
this clock set at a very low rate. Fix this issue by using the correct
rcg2 ops.

Fixes: a2e8272f3f89 ("clk: qcom: Add MSM8916 gpu clocks")
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
---
 drivers/clk/qcom/gcc-msm8916.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/clk/qcom/gcc-msm8916.c b/drivers/clk/qcom/gcc-msm8916.c
index 2cfe7000fc60..3410ee68d4bc 100644
--- a/drivers/clk/qcom/gcc-msm8916.c
+++ b/drivers/clk/qcom/gcc-msm8916.c
@@ -1176,7 +1176,7 @@ static struct clk_rcg2 bimc_gpu_clk_src = {
 		.parent_names = gcc_xo_gpll0_bimc,
 		.num_parents = 3,
 		.flags = CLK_GET_RATE_NOCACHE,
-		.ops = &clk_rcg2_shared_ops,
+		.ops = &clk_rcg2_ops,
 	},
 };
 
-- 
cgit v1.2.3


From 1a7da87727acfc201141d67e6edf2fb4ddcab7db Mon Sep 17 00:00:00 2001
From: Peter De Schrijver <pdeschrijver@nvidia.com>
Date: Tue, 25 Jul 2017 13:34:02 +0300
Subject: clk: tegra: fix SS control on PLL enable/disable

PLL SS was only controlled when setting the PLL rate, not when the PLL itself
is enabled or disabled.

Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Reviewed-by: Jon Mayo <jmayo@nvidia.com>
Tested-by: Thierry Reding <treding@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
---
 drivers/clk/tegra/clk-pll.c | 44 ++++++++++++++++++++++++--------------------
 1 file changed, 24 insertions(+), 20 deletions(-)

diff --git a/drivers/clk/tegra/clk-pll.c b/drivers/clk/tegra/clk-pll.c
index 159a854779e6..e9bdb1662219 100644
--- a/drivers/clk/tegra/clk-pll.c
+++ b/drivers/clk/tegra/clk-pll.c
@@ -418,6 +418,26 @@ static void _clk_pll_disable(struct clk_hw *hw)
 	}
 }
 
+static void pll_clk_start_ss(struct tegra_clk_pll *pll)
+{
+	if (pll->params->defaults_set && pll->params->ssc_ctrl_reg) {
+		u32 val = pll_readl(pll->params->ssc_ctrl_reg, pll);
+
+		val |= pll->params->ssc_ctrl_en_mask;
+		pll_writel(val, pll->params->ssc_ctrl_reg, pll);
+	}
+}
+
+static void pll_clk_stop_ss(struct tegra_clk_pll *pll)
+{
+	if (pll->params->defaults_set && pll->params->ssc_ctrl_reg) {
+		u32 val = pll_readl(pll->params->ssc_ctrl_reg, pll);
+
+		val &= ~pll->params->ssc_ctrl_en_mask;
+		pll_writel(val, pll->params->ssc_ctrl_reg, pll);
+	}
+}
+
 static int clk_pll_enable(struct clk_hw *hw)
 {
 	struct tegra_clk_pll *pll = to_clk_pll(hw);
@@ -431,6 +451,8 @@ static int clk_pll_enable(struct clk_hw *hw)
 
 	ret = clk_pll_wait_for_lock(pll);
 
+	pll_clk_start_ss(pll);
+
 	if (pll->lock)
 		spin_unlock_irqrestore(pll->lock, flags);
 
@@ -445,6 +467,8 @@ static void clk_pll_disable(struct clk_hw *hw)
 	if (pll->lock)
 		spin_lock_irqsave(pll->lock, flags);
 
+	pll_clk_stop_ss(pll);
+
 	_clk_pll_disable(hw);
 
 	if (pll->lock)
@@ -716,26 +740,6 @@ static void _update_pll_cpcon(struct tegra_clk_pll *pll,
 	pll_writel_misc(val, pll);
 }
 
-static void pll_clk_start_ss(struct tegra_clk_pll *pll)
-{
-	if (pll->params->defaults_set && pll->params->ssc_ctrl_reg) {
-		u32 val = pll_readl(pll->params->ssc_ctrl_reg, pll);
-
-		val |= pll->params->ssc_ctrl_en_mask;
-		pll_writel(val, pll->params->ssc_ctrl_reg, pll);
-	}
-}
-
-static void pll_clk_stop_ss(struct tegra_clk_pll *pll)
-{
-	if (pll->params->defaults_set && pll->params->ssc_ctrl_reg) {
-		u32 val = pll_readl(pll->params->ssc_ctrl_reg, pll);
-
-		val &= ~pll->params->ssc_ctrl_en_mask;
-		pll_writel(val, pll->params->ssc_ctrl_reg, pll);
-	}
-}
-
 static int _program_pll(struct clk_hw *hw, struct tegra_clk_pll_freq_table *cfg,
 			unsigned long rate)
 {
-- 
cgit v1.2.3


From 04434cfa2b2032eae52c197ea184844dd76a329d Mon Sep 17 00:00:00 2001
From: Peter De Schrijver <pdeschrijver@nvidia.com>
Date: Tue, 25 Jul 2017 13:34:03 +0300
Subject: clk: tegra: Enable PLL_SS for Tegra210

Make sure the pll_ss ops are compiled even when only building for Tegra210.

Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Reviewed-by: Shreshtha Sahu <ssahu@nvidia.com>
Tested-by: Shreshtha Sahu <ssahu@nvidia.com>
Reviewed-by: Jon Mayo <jmayo@nvidia.com>
Tested-by: Thierry Reding <treding@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
---
 drivers/clk/tegra/clk-pll.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/clk/tegra/clk-pll.c b/drivers/clk/tegra/clk-pll.c
index e9bdb1662219..fbd8726213ab 100644
--- a/drivers/clk/tegra/clk-pll.c
+++ b/drivers/clk/tegra/clk-pll.c
@@ -2255,7 +2255,7 @@ tegra_clk_register_pllu_tegra114(const char *name, const char *parent_name,
 }
 #endif
 
-#if defined(CONFIG_ARCH_TEGRA_124_SOC) || defined(CONFIG_ARCH_TEGRA_132_SOC)
+#if defined(CONFIG_ARCH_TEGRA_124_SOC) || defined(CONFIG_ARCH_TEGRA_132_SOC) || defined(CONFIG_ARCH_TEGRA_210_SOC)
 static const struct clk_ops tegra_clk_pllss_ops = {
 	.is_enabled = clk_pll_is_enabled,
 	.enable = clk_pll_enable,
-- 
cgit v1.2.3


From 030999fe514d2d6dbabf0ed6727f4c493082d99d Mon Sep 17 00:00:00 2001
From: Peter De Schrijver <pdeschrijver@nvidia.com>
Date: Tue, 25 Jul 2017 13:34:04 +0300
Subject: clk: tegra: disable SSC for PLL_D2

PLLD2 is used for HDMI which does not allow Spread Spectrum clocking.

Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Tested-by: Thierry Reding <treding@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
---
 drivers/clk/tegra/clk-tegra210.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/clk/tegra/clk-tegra210.c b/drivers/clk/tegra/clk-tegra210.c
index 1024e853ea65..facd6ee672dc 100644
--- a/drivers/clk/tegra/clk-tegra210.c
+++ b/drivers/clk/tegra/clk-tegra210.c
@@ -146,7 +146,7 @@
 #define PLLD_SDM_EN_MASK BIT(16)
 
 #define PLLD2_SDM_EN_MASK BIT(31)
-#define PLLD2_SSC_EN_MASK BIT(30)
+#define PLLD2_SSC_EN_MASK 0
 
 #define PLLDP_SS_CFG	0x598
 #define PLLDP_SDM_EN_MASK BIT(31)
-- 
cgit v1.2.3


From e34e69cc866a26ec42be789a49ea6174ddc801ca Mon Sep 17 00:00:00 2001
From: Peter De Schrijver <pdeschrijver@nvidia.com>
Date: Tue, 25 Jul 2017 13:34:05 +0300
Subject: clk: tegra210: remove non-existing VFIR clock

Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Tested-by: Thierry Reding <treding@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
---
 drivers/clk/tegra/clk-tegra210.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/clk/tegra/clk-tegra210.c b/drivers/clk/tegra/clk-tegra210.c
index facd6ee672dc..dc4a81328d5a 100644
--- a/drivers/clk/tegra/clk-tegra210.c
+++ b/drivers/clk/tegra/clk-tegra210.c
@@ -2204,7 +2204,6 @@ static struct tegra_clk tegra210_clks[tegra_clk_max] __initdata = {
 	[tegra_clk_gpu] = { .dt_id = TEGRA210_CLK_GPU, .present = true },
 	[tegra_clk_pll_g_ref] = { .dt_id = TEGRA210_CLK_PLL_G_REF, .present = true, },
 	[tegra_clk_uartb_8] = { .dt_id = TEGRA210_CLK_UARTB, .present = true },
-	[tegra_clk_vfir] = { .dt_id = TEGRA210_CLK_VFIR, .present = true },
 	[tegra_clk_spdif_in_8] = { .dt_id = TEGRA210_CLK_SPDIF_IN, .present = true },
 	[tegra_clk_spdif_out] = { .dt_id = TEGRA210_CLK_SPDIF_OUT, .present = true },
 	[tegra_clk_vi_10] = { .dt_id = TEGRA210_CLK_VI, .present = true },
-- 
cgit v1.2.3


From bc7b34a2fb78661b2980d949aad8edc39c253e3a Mon Sep 17 00:00:00 2001
From: Peter De Schrijver <pdeschrijver@nvidia.com>
Date: Tue, 25 Jul 2017 13:34:06 +0300
Subject: clk: tegra: Init cfg structure in _get_pll_mnp

Not all fields are read from the hw depending on the PLL type. Make sure
the other fields are 0 by clearing the structure beforehand to prevent
users such as the rate re-calculation code from using bogus values.

Based on work by  Alex Frid <afrid@nvidia.com>

Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Tested-by: Thierry Reding <treding@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
---
 drivers/clk/tegra/clk-pll.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/clk/tegra/clk-pll.c b/drivers/clk/tegra/clk-pll.c
index fbd8726213ab..1c36b8a72bd2 100644
--- a/drivers/clk/tegra/clk-pll.c
+++ b/drivers/clk/tegra/clk-pll.c
@@ -690,6 +690,8 @@ static void _get_pll_mnp(struct tegra_clk_pll *pll,
 	struct tegra_clk_pll_params *params = pll->params;
 	struct div_nmp *div_nmp = params->div_nmp;
 
+	*cfg = (struct tegra_clk_pll_freq_table) { };
+
 	if ((params->flags & (TEGRA_PLLM | TEGRA_PLLMB)) &&
 		(pll_override_readl(PMC_PLLP_WB0_OVERRIDE, pll) &
 			PMC_PLLP_WB0_OVERRIDE_PLLM_OVERRIDE)) {
-- 
cgit v1.2.3


From a851ea2b9e1084a7bb02403ca03667e162e226fe Mon Sep 17 00:00:00 2001
From: Alex Frid <afrid@nvidia.com>
Date: Tue, 25 Jul 2017 13:34:07 +0300
Subject: clk: tegra: Fix T210 effective NDIV calculation

Don't take the fractional part into account to calculate the effective
NDIV if fractional ndiv is not enabled.

Signed-off-by: Alex Frid <afrid@nvidia.com>
Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Tested-by: Thierry Reding <treding@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
---
 drivers/clk/tegra/clk-tegra210.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/drivers/clk/tegra/clk-tegra210.c b/drivers/clk/tegra/clk-tegra210.c
index dc4a81328d5a..a4d7d94b6436 100644
--- a/drivers/clk/tegra/clk-tegra210.c
+++ b/drivers/clk/tegra/clk-tegra210.c
@@ -241,6 +241,9 @@
 #define PLL_SDM_COEFF BIT(13)
 #define sdin_din_to_data(din)	((u16)((din) ? : 0xFFFFU))
 #define sdin_data_to_din(dat)	(((dat) == 0xFFFFU) ? 0 : (s16)dat)
+/* This macro returns ndiv effective scaled to SDM range */
+#define sdin_get_n_eff(cfg)	((cfg)->n * PLL_SDM_COEFF + ((cfg)->sdm_data ? \
+		(PLL_SDM_COEFF/2 + sdin_data_to_din((cfg)->sdm_data)) : 0))
 
 /* Tegra CPU clock and reset control regs */
 #define CLK_RST_CONTROLLER_CPU_CMPLX_STATUS	0x470
@@ -1288,8 +1291,7 @@ static int tegra210_pll_fixed_mdiv_cfg(struct clk_hw *hw,
 			s -= PLL_SDM_COEFF / 2;
 			cfg->sdm_data = sdin_din_to_data(s);
 		}
-		cfg->output_rate *= cfg->n * PLL_SDM_COEFF + PLL_SDM_COEFF/2 +
-					sdin_data_to_din(cfg->sdm_data);
+		cfg->output_rate *= sdin_get_n_eff(cfg);
 		cfg->output_rate /= p * cfg->m * PLL_SDM_COEFF;
 	} else {
 		cfg->output_rate *= cfg->n;
@@ -1314,8 +1316,7 @@ static int tegra210_pll_fixed_mdiv_cfg(struct clk_hw *hw,
  */
 static void tegra210_clk_pll_set_gain(struct tegra_clk_pll_freq_table *cfg)
 {
-	cfg->n = cfg->n * PLL_SDM_COEFF + PLL_SDM_COEFF/2 +
-			sdin_data_to_din(cfg->sdm_data);
+	cfg->n = sdin_get_n_eff(cfg);
 	cfg->m *= PLL_SDM_COEFF;
 }
 
-- 
cgit v1.2.3


From 82c875ca2b26fcca1a92ed4fd3a10bd653d6f680 Mon Sep 17 00:00:00 2001
From: Alex Frid <afrid@nvidia.com>
Date: Tue, 25 Jul 2017 13:34:08 +0300
Subject: clk: tegra: Add TEGRA_PERIPH_ON_APB flag to I2C

I2C controllers are also on the APB bus and therefor need this flag to handle
resets correctly.

Signed-off-by: Alex Frid <afrid@nvidia.com>
Reviewed-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Tested-by: Thierry Reding <treding@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
---
 drivers/clk/tegra/clk-tegra-periph.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/clk/tegra/clk-tegra-periph.c b/drivers/clk/tegra/clk-tegra-periph.c
index 294bfe40a4f5..848255cc0209 100644
--- a/drivers/clk/tegra/clk-tegra-periph.c
+++ b/drivers/clk/tegra/clk-tegra-periph.c
@@ -216,7 +216,8 @@
 			     _clk_num, _clk_id)			\
 	TEGRA_INIT_DATA_TABLE(_name, NULL, NULL, _parents, _offset,\
 			30, MASK(2), 0, 0, 16, 0, TEGRA_DIVIDER_ROUND_UP,\
-			_clk_num, 0, _clk_id, _parents##_idx, 0, NULL)
+			_clk_num, TEGRA_PERIPH_ON_APB, _clk_id, \
+			_parents##_idx, 0, NULL)
 
 #define XUSB(_name, _parents, _offset, \
 			     _clk_num, _gate_flags, _clk_id)	 \
-- 
cgit v1.2.3


From 3dd065e70e6c6ec54d2fc7d5158d88518d3c5ab9 Mon Sep 17 00:00:00 2001
From: Peter De Schrijver <pdeschrijver@nvidia.com>
Date: Tue, 25 Jul 2017 13:34:09 +0300
Subject: clk: tegra: change post IDDQ release delay to 5us

Increase delay after PLL IDDQ release to 5us per PLL specifications.

based on work by Alex Frid <afrid@nvidia.com>

Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Tested-by: Thierry Reding <treding@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
---
 drivers/clk/tegra/clk-pll.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/clk/tegra/clk-pll.c b/drivers/clk/tegra/clk-pll.c
index 1c36b8a72bd2..695ccb436cec 100644
--- a/drivers/clk/tegra/clk-pll.c
+++ b/drivers/clk/tegra/clk-pll.c
@@ -363,7 +363,7 @@ static void _clk_pll_enable(struct clk_hw *hw)
 		val = pll_readl(pll->params->iddq_reg, pll);
 		val &= ~BIT(pll->params->iddq_bit_idx);
 		pll_writel(val, pll->params->iddq_reg, pll);
-		udelay(2);
+		udelay(5);
 	}
 
 	if (pll->params->reset_reg) {
-- 
cgit v1.2.3


From 1934ffd08d79ad746dbb1e2fcaeb76950be57be6 Mon Sep 17 00:00:00 2001
From: Peter De Schrijver <pdeschrijver@nvidia.com>
Date: Tue, 25 Jul 2017 13:34:10 +0300
Subject: clk: tegra: don't warn for pll_d2 defaults unnecessarily

If the PLL is on, only warn if the defaults are not yet set. Otherwise be
silent.

Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Reviewed-by: Timo Alho <talho@nvidia.com>
Tested-by: Thierry Reding <treding@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
---
 drivers/clk/tegra/clk-tegra210.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/clk/tegra/clk-tegra210.c b/drivers/clk/tegra/clk-tegra210.c
index a4d7d94b6436..1e470ca154f6 100644
--- a/drivers/clk/tegra/clk-tegra210.c
+++ b/drivers/clk/tegra/clk-tegra210.c
@@ -718,8 +718,6 @@ static void plldss_defaults(const char *pll_name, struct tegra_clk_pll *plldss,
 	plldss->params->defaults_set = true;
 
 	if (val & PLL_ENABLE) {
-		pr_warn("%s already enabled. Postponing set full defaults\n",
-			 pll_name);
 
 		/*
 		 * PLL is ON: check if defaults already set, then set those
@@ -758,6 +756,10 @@ static void plldss_defaults(const char *pll_name, struct tegra_clk_pll *plldss,
 				(~PLLDSS_MISC1_CFG_EN_SDM));
 		}
 
+		if (!plldss->params->defaults_set)
+			pr_warn("%s already enabled. Postponing set full defaults\n",
+				 pll_name);
+
 		/* Enable lock detect */
 		if (val & PLLDSS_BASE_LOCK_OVERRIDE) {
 			val &= ~PLLDSS_BASE_LOCK_OVERRIDE;
-- 
cgit v1.2.3


From ac99afe55adf1406e367d229a1c5b2f09818b5a6 Mon Sep 17 00:00:00 2001
From: Alex Frid <afrid@nvidia.com>
Date: Tue, 25 Jul 2017 13:34:11 +0300
Subject: clk: tegra: Re-factor T210 PLLX registration

Tegra210 PLLX uses the same sequences than then PLLC instances. So there
is no need to have a special registration function and ops struct for it.
Simplify the code by changing all references to the Tegra210 PLLX
registration function to the Tegra210 PLLC registration function and
avoid duplicate functionality.

Based on work by Alex Frid <afrid@nvidia.com>

Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Tested-by: Thierry Reding <treding@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
---
 drivers/clk/tegra/clk-pll.c              | 40 --------------------------------
 drivers/clk/tegra/clk-tegra-super-gen4.c | 11 +++++++--
 drivers/clk/tegra/clk-tegra210.c         |  2 +-
 drivers/clk/tegra/clk.h                  |  6 -----
 4 files changed, 10 insertions(+), 49 deletions(-)

diff --git a/drivers/clk/tegra/clk-pll.c b/drivers/clk/tegra/clk-pll.c
index 695ccb436cec..02f34e6b3bca 100644
--- a/drivers/clk/tegra/clk-pll.c
+++ b/drivers/clk/tegra/clk-pll.c
@@ -2610,46 +2610,6 @@ struct clk *tegra_clk_register_pllc_tegra210(const char *name,
 	return clk;
 }
 
-struct clk *tegra_clk_register_pllxc_tegra210(const char *name,
-			const char *parent_name, void __iomem *clk_base,
-			void __iomem *pmc, unsigned long flags,
-			struct tegra_clk_pll_params *pll_params,
-			spinlock_t *lock)
-{
-	struct tegra_clk_pll *pll;
-	struct clk *clk, *parent;
-	unsigned long parent_rate;
-
-	parent = __clk_lookup(parent_name);
-	if (!parent) {
-		WARN(1, "parent clk %s of %s must be registered first\n",
-			name, parent_name);
-		return ERR_PTR(-EINVAL);
-	}
-
-	if (!pll_params->pdiv_tohw)
-		return ERR_PTR(-EINVAL);
-
-	parent_rate = clk_get_rate(parent);
-
-	pll_params->vco_min = _clip_vco_min(pll_params->vco_min, parent_rate);
-
-	if (pll_params->adjust_vco)
-		pll_params->vco_min = pll_params->adjust_vco(pll_params,
-							     parent_rate);
-
-	pll = _tegra_init_pll(clk_base, pmc, pll_params, lock);
-	if (IS_ERR(pll))
-		return ERR_CAST(pll);
-
-	clk = _tegra_clk_register_pll(pll, name, parent_name, flags,
-				      &tegra_clk_pll_ops);
-	if (IS_ERR(clk))
-		kfree(pll);
-
-	return clk;
-}
-
 struct clk *tegra_clk_register_pllss_tegra210(const char *name,
 				const char *parent_name, void __iomem *clk_base,
 				unsigned long flags,
diff --git a/drivers/clk/tegra/clk-tegra-super-gen4.c b/drivers/clk/tegra/clk-tegra-super-gen4.c
index 474de0f0c26d..4f6fd307cb70 100644
--- a/drivers/clk/tegra/clk-tegra-super-gen4.c
+++ b/drivers/clk/tegra/clk-tegra-super-gen4.c
@@ -232,8 +232,15 @@ static void __init tegra_super_clk_init(void __iomem *clk_base,
 	if (!dt_clk)
 		return;
 
-	clk = tegra_clk_register_pllxc("pll_x", "pll_ref", clk_base,
-			pmc_base, CLK_IGNORE_UNUSED, params, NULL);
+#if defined(CONFIG_ARCH_TEGRA_210_SOC)
+	if (gen_info->gen == gen5)
+		clk = tegra_clk_register_pllc_tegra210("pll_x", "pll_ref",
+			clk_base, pmc_base, CLK_IGNORE_UNUSED, params, NULL);
+	else
+#endif
+		clk = tegra_clk_register_pllxc("pll_x", "pll_ref", clk_base,
+				pmc_base, CLK_IGNORE_UNUSED, params, NULL);
+
 	*dt_clk = clk;
 
 	/* PLLX_OUT0 */
diff --git a/drivers/clk/tegra/clk-tegra210.c b/drivers/clk/tegra/clk-tegra210.c
index 1e470ca154f6..4fa7ab31fb66 100644
--- a/drivers/clk/tegra/clk-tegra210.c
+++ b/drivers/clk/tegra/clk-tegra210.c
@@ -2701,7 +2701,7 @@ static void __init tegra210_pll_init(void __iomem *clk_base,
 	struct clk *clk;
 
 	/* PLLC */
-	clk = tegra_clk_register_pllxc_tegra210("pll_c", "pll_ref", clk_base,
+	clk = tegra_clk_register_pllc_tegra210("pll_c", "pll_ref", clk_base,
 			pmc, 0, &pll_c_params, NULL);
 	if (!WARN_ON(IS_ERR(clk)))
 		clk_register_clkdev(clk, "pll_c", NULL);
diff --git a/drivers/clk/tegra/clk.h b/drivers/clk/tegra/clk.h
index 945b07093afa..872f1189ad7f 100644
--- a/drivers/clk/tegra/clk.h
+++ b/drivers/clk/tegra/clk.h
@@ -362,12 +362,6 @@ struct clk *tegra_clk_register_pllxc(const char *name, const char *parent_name,
 			    struct tegra_clk_pll_params *pll_params,
 			    spinlock_t *lock);
 
-struct clk *tegra_clk_register_pllxc_tegra210(const char *name,
-			const char *parent_name, void __iomem *clk_base,
-			void __iomem *pmc, unsigned long flags,
-			struct tegra_clk_pll_params *pll_params,
-			spinlock_t *lock);
-
 struct clk *tegra_clk_register_pllm(const char *name, const char *parent_name,
 			   void __iomem *clk_base, void __iomem *pmc,
 			   unsigned long flags,
-- 
cgit v1.2.3


From f7bdb8b78a3d4b2f0ebd76e606ac6ca2925d7b02 Mon Sep 17 00:00:00 2001
From: Alex Frid <afrid@nvidia.com>
Date: Tue, 25 Jul 2017 13:34:12 +0300
Subject: clk: tegra: Update T210 PLLSS (D2/DP) registration

Remove from Tegra210 PLLSS registration code sections that
- attempt to set PLL minimum rate (unnecessary, and dangerous if PLL
  is already enabled on boot)
- apply pre-Tegra210 defaults settings
- check IDDQ setting (duplicated with Tegra210 PLLSS check defaults)

Replaced setting of reference clock with check that default oscillator
selection is not changed, and failed registration otherwise as validation
was only done with the oscillator as the reference clock.

Reordered registration, so that PLL initialization is called after
VCOmin adjustment.

Signed-off-by: Alex Frid <afrid@nvidia.com>
Reviewed-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Tested-by: Thierry Reding <treding@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
---
 drivers/clk/tegra/clk-pll.c | 48 +++++++++------------------------------------
 1 file changed, 9 insertions(+), 39 deletions(-)

diff --git a/drivers/clk/tegra/clk-pll.c b/drivers/clk/tegra/clk-pll.c
index 02f34e6b3bca..c6bce4a71578 100644
--- a/drivers/clk/tegra/clk-pll.c
+++ b/drivers/clk/tegra/clk-pll.c
@@ -2618,10 +2618,8 @@ struct clk *tegra_clk_register_pllss_tegra210(const char *name,
 {
 	struct tegra_clk_pll *pll;
 	struct clk *clk, *parent;
-	struct tegra_clk_pll_freq_table cfg;
 	unsigned long parent_rate;
 	u32 val;
-	int i;
 
 	if (!pll_params->div_nmp)
 		return ERR_PTR(-EINVAL);
@@ -2633,13 +2631,11 @@ struct clk *tegra_clk_register_pllss_tegra210(const char *name,
 		return ERR_PTR(-EINVAL);
 	}
 
-	pll = _tegra_init_pll(clk_base, NULL, pll_params, lock);
-	if (IS_ERR(pll))
-		return ERR_CAST(pll);
-
-	val = pll_readl_base(pll);
-	val &= ~PLLSS_REF_SRC_SEL_MASK;
-	pll_writel_base(val, pll);
+	val = readl_relaxed(clk_base + pll_params->base_reg);
+	if (val & PLLSS_REF_SRC_SEL_MASK) {
+		WARN(1, "not supported reference clock for %s\n", name);
+		return ERR_PTR(-EINVAL);
+	}
 
 	parent_rate = clk_get_rate(parent);
 
@@ -2649,36 +2645,10 @@ struct clk *tegra_clk_register_pllss_tegra210(const char *name,
 		pll_params->vco_min = pll_params->adjust_vco(pll_params,
 							     parent_rate);
 
-	/* initialize PLL to minimum rate */
-
-	cfg.m = _pll_fixed_mdiv(pll_params, parent_rate);
-	cfg.n = cfg.m * pll_params->vco_min / parent_rate;
-
-	for (i = 0; pll_params->pdiv_tohw[i].pdiv; i++)
-		;
-	if (!i) {
-		kfree(pll);
-		return ERR_PTR(-EINVAL);
-	}
-
-	cfg.p = pll_params->pdiv_tohw[i-1].hw_val;
-
-	_update_pll_mnp(pll, &cfg);
-
-	pll_writel_misc(PLLSS_MISC_DEFAULT, pll);
-
-	val = pll_readl_base(pll);
-	if (val & PLL_BASE_ENABLE) {
-		if (val & BIT(pll_params->iddq_bit_idx)) {
-			WARN(1, "%s is on but IDDQ set\n", name);
-			kfree(pll);
-			return ERR_PTR(-EINVAL);
-		}
-	} else
-		val |= BIT(pll_params->iddq_bit_idx);
-
-	val &= ~PLLSS_LOCK_OVERRIDE;
-	pll_writel_base(val, pll);
+	pll_params->flags |= TEGRA_PLL_BYPASS;
+	pll = _tegra_init_pll(clk_base, NULL, pll_params, lock);
+	if (IS_ERR(pll))
+		return ERR_CAST(pll);
 
 	clk = _tegra_clk_register_pll(pll, name, parent_name, flags,
 					&tegra_clk_pll_ops);
-- 
cgit v1.2.3


From 2f924ac33f6bd46dcf1d1374401515ada5a35f21 Mon Sep 17 00:00:00 2001
From: Alex Frid <afrid@nvidia.com>
Date: Tue, 25 Jul 2017 13:34:13 +0300
Subject: clk: tegra: Fix T210 PLLRE registration

Switched Tegra210 PLLRE registration to common PLL ops instead of special
PLLRE ops used on previous Tegra chips. The latter ops do not follow
chip specific PLL frequency table, and do not apply chip specific rate
calculation method.

Removed unnecessary default rate setting that duplicates h/w reset
state, and is overwritten by clock initialization, anyway.

Signed-off-by: Alex Frid <afrid@nvidia.com>
Reviewed-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Reviewed-by: Jon Mayo <jmayo@nvidia.com>
Tested-by: Thierry Reding <treding@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
---
 drivers/clk/tegra/clk-pll.c | 21 +--------------------
 1 file changed, 1 insertion(+), 20 deletions(-)

diff --git a/drivers/clk/tegra/clk-pll.c b/drivers/clk/tegra/clk-pll.c
index c6bce4a71578..7c369e21c91c 100644
--- a/drivers/clk/tegra/clk-pll.c
+++ b/drivers/clk/tegra/clk-pll.c
@@ -2355,7 +2355,6 @@ struct clk *tegra_clk_register_pllre_tegra210(const char *name,
 			  struct tegra_clk_pll_params *pll_params,
 			  spinlock_t *lock, unsigned long parent_rate)
 {
-	u32 val;
 	struct tegra_clk_pll *pll;
 	struct clk *clk;
 
@@ -2369,26 +2368,8 @@ struct clk *tegra_clk_register_pllre_tegra210(const char *name,
 	if (IS_ERR(pll))
 		return ERR_CAST(pll);
 
-	/* program minimum rate by default */
-
-	val = pll_readl_base(pll);
-	if (val & PLL_BASE_ENABLE)
-		WARN_ON(readl_relaxed(clk_base + pll_params->iddq_reg) &
-				BIT(pll_params->iddq_bit_idx));
-	else {
-		val = 0x4 << divm_shift(pll);
-		val |= 0x41 << divn_shift(pll);
-		pll_writel_base(val, pll);
-	}
-
-	/* disable lock override */
-
-	val = pll_readl_misc(pll);
-	val &= ~BIT(29);
-	pll_writel_misc(val, pll);
-
 	clk = _tegra_clk_register_pll(pll, name, parent_name, flags,
-				      &tegra_clk_pllre_ops);
+				      &tegra_clk_pll_ops);
 	if (IS_ERR(clk))
 		kfree(pll);
 
-- 
cgit v1.2.3


From 71422dbb89ee4198c705ad14c75bfc72625f95c2 Mon Sep 17 00:00:00 2001
From: Alex Frid <afrid@nvidia.com>
Date: Tue, 25 Jul 2017 13:34:14 +0300
Subject: clk: tegra: Correct Tegra210 UTMIPLL poweron delay

Increased Tegra210 UTMIPLL power on delay to 20us (spec maximum is 15us).
Also remove a few empty lines to make it more clear the ACTIVE_DLY_COUNT
and ENABLE_DLY_COUNT fields.

Signed-off-by: Alex Frid <afrid@nvidia.com>
Reviewed-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Reviewed-by: Jon Mayo <jmayo@nvidia.com>
Tested-by: Thierry Reding <treding@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
---
 drivers/clk/tegra/clk-tegra210.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/clk/tegra/clk-tegra210.c b/drivers/clk/tegra/clk-tegra210.c
index 4fa7ab31fb66..fd04b0e501b7 100644
--- a/drivers/clk/tegra/clk-tegra210.c
+++ b/drivers/clk/tegra/clk-tegra210.c
@@ -2472,15 +2472,14 @@ static void tegra210_utmi_param_configure(void)
 	reg |= UTMIP_PLL_CFG2_STABLE_COUNT(utmi_parameters[i].stable_count);
 
 	reg &= ~UTMIP_PLL_CFG2_ACTIVE_DLY_COUNT(~0);
-
 	reg |=
 	UTMIP_PLL_CFG2_ACTIVE_DLY_COUNT(utmi_parameters[i].active_delay_count);
 	writel_relaxed(reg, clk_base + UTMIP_PLL_CFG2);
 
 	/* Program UTMIP PLL delay and oscillator frequency counts */
 	reg = readl_relaxed(clk_base + UTMIP_PLL_CFG1);
-	reg &= ~UTMIP_PLL_CFG1_ENABLE_DLY_COUNT(~0);
 
+	reg &= ~UTMIP_PLL_CFG1_ENABLE_DLY_COUNT(~0);
 	reg |=
 	UTMIP_PLL_CFG1_ENABLE_DLY_COUNT(utmi_parameters[i].enable_delay_count);
 
@@ -2496,7 +2495,8 @@ static void tegra210_utmi_param_configure(void)
 	reg &= ~UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERDOWN;
 	reg |= UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERUP;
 	writel_relaxed(reg, clk_base + UTMIP_PLL_CFG1);
-	udelay(1);
+
+	udelay(20);
 
 	/* Enable samplers for SNPS, XUSB_HOST, XUSB_DEV */
 	reg = readl_relaxed(clk_base + UTMIP_PLL_CFG2);
-- 
cgit v1.2.3


From 7157c69a99510c2234fc0b6001f21776085fda73 Mon Sep 17 00:00:00 2001
From: Alex Frid <afrid@nvidia.com>
Date: Tue, 25 Jul 2017 13:34:15 +0300
Subject: clk: tegra: Fix Tegra210 PLLU initialization

- Added necessary delays in PLLU enable sequence during initialization
- Applied PLLU lock to all secondary gates (PLLU_48M and PLLU_60M were
missing).

Signed-off-by: Alex Frid <afrid@nvidia.com>
Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Tested-by: Thierry Reding <treding@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
---
 drivers/clk/tegra/clk-tegra210.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/clk/tegra/clk-tegra210.c b/drivers/clk/tegra/clk-tegra210.c
index fd04b0e501b7..6d7a613f2656 100644
--- a/drivers/clk/tegra/clk-tegra210.c
+++ b/drivers/clk/tegra/clk-tegra210.c
@@ -2554,6 +2554,7 @@ static int tegra210_enable_pllu(void)
 	reg = readl_relaxed(clk_base + pllu.params->ext_misc_reg[0]);
 	reg &= ~BIT(pllu.params->iddq_bit_idx);
 	writel_relaxed(reg, clk_base + pllu.params->ext_misc_reg[0]);
+	udelay(5);
 
 	reg = readl_relaxed(clk_base + PLLU_BASE);
 	reg &= ~GENMASK(20, 0);
@@ -2561,6 +2562,7 @@ static int tegra210_enable_pllu(void)
 	reg |= fentry->n << 8;
 	reg |= fentry->p << 16;
 	writel(reg, clk_base + PLLU_BASE);
+	udelay(1);
 	reg |= PLL_ENABLE;
 	writel(reg, clk_base + PLLU_BASE);
 
@@ -2800,14 +2802,14 @@ static void __init tegra210_pll_init(void __iomem *clk_base,
 	/* PLLU_60M */
 	clk = clk_register_gate(NULL, "pll_u_60M", "pll_u_out2",
 				CLK_SET_RATE_PARENT, clk_base + PLLU_BASE,
-				23, 0, NULL);
+				23, 0, &pll_u_lock);
 	clk_register_clkdev(clk, "pll_u_60M", NULL);
 	clks[TEGRA210_CLK_PLL_U_60M] = clk;
 
 	/* PLLU_48M */
 	clk = clk_register_gate(NULL, "pll_u_48M", "pll_u_out1",
 				CLK_SET_RATE_PARENT, clk_base + PLLU_BASE,
-				25, 0, NULL);
+				25, 0, &pll_u_lock);
 	clk_register_clkdev(clk, "pll_u_48M", NULL);
 	clks[TEGRA210_CLK_PLL_U_48M] = clk;
 
-- 
cgit v1.2.3


From 69a6beab085264cdcdb9e3160b1a2ae61b2efde1 Mon Sep 17 00:00:00 2001
From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Date: Mon, 14 Aug 2017 12:26:34 +0200
Subject: clk: msm8996-gcc: add missing smmu clks

This patch adds missing LPASS smmu clks which are required by the audio driver.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
---
 drivers/clk/qcom/gcc-msm8996.c               | 28 ++++++++++++++++++++++++++++
 include/dt-bindings/clock/qcom,gcc-msm8996.h |  2 ++
 2 files changed, 30 insertions(+)

diff --git a/drivers/clk/qcom/gcc-msm8996.c b/drivers/clk/qcom/gcc-msm8996.c
index 8abc200d4fd3..7ddec886fcd3 100644
--- a/drivers/clk/qcom/gcc-msm8996.c
+++ b/drivers/clk/qcom/gcc-msm8996.c
@@ -2730,6 +2730,32 @@ static struct clk_fixed_factor ufs_rx_cfg_clk_src = {
 	},
 };
 
+static struct clk_branch gcc_hlos1_vote_lpass_core_smmu_clk = {
+	.halt_reg = 0x7d010,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0x7d010,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "hlos1_vote_lpass_core_smmu_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_hlos1_vote_lpass_adsp_smmu_clk = {
+	.halt_reg = 0x7d014,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0x7d014,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "hlos1_vote_lpass_adsp_smmu_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
 static struct clk_branch gcc_ufs_rx_cfg_clk = {
 	.halt_reg = 0x75014,
 	.clkr = {
@@ -3307,6 +3333,8 @@ static struct clk_regmap *gcc_msm8996_clocks[] = {
 	[GCC_UFS_AHB_CLK] = &gcc_ufs_ahb_clk.clkr,
 	[GCC_UFS_TX_CFG_CLK] = &gcc_ufs_tx_cfg_clk.clkr,
 	[GCC_UFS_RX_CFG_CLK] = &gcc_ufs_rx_cfg_clk.clkr,
+	[GCC_HLOS1_VOTE_LPASS_CORE_SMMU_CLK] = &gcc_hlos1_vote_lpass_core_smmu_clk.clkr,
+	[GCC_HLOS1_VOTE_LPASS_ADSP_SMMU_CLK] = &gcc_hlos1_vote_lpass_adsp_smmu_clk.clkr,
 	[GCC_UFS_TX_SYMBOL_0_CLK] = &gcc_ufs_tx_symbol_0_clk.clkr,
 	[GCC_UFS_RX_SYMBOL_0_CLK] = &gcc_ufs_rx_symbol_0_clk.clkr,
 	[GCC_UFS_RX_SYMBOL_1_CLK] = &gcc_ufs_rx_symbol_1_clk.clkr,
diff --git a/include/dt-bindings/clock/qcom,gcc-msm8996.h b/include/dt-bindings/clock/qcom,gcc-msm8996.h
index 1f5c42254798..75b07cf5eed0 100644
--- a/include/dt-bindings/clock/qcom,gcc-msm8996.h
+++ b/include/dt-bindings/clock/qcom,gcc-msm8996.h
@@ -233,6 +233,8 @@
 #define GCC_PCIE_CLKREF_CLK					216
 #define GCC_RX2_USB2_CLKREF_CLK					217
 #define GCC_RX1_USB2_CLKREF_CLK					218
+#define GCC_HLOS1_VOTE_LPASS_CORE_SMMU_CLK			219
+#define GCC_HLOS1_VOTE_LPASS_ADSP_SMMU_CLK			220
 
 #define GCC_SYSTEM_NOC_BCR					0
 #define GCC_CONFIG_NOC_BCR					1
-- 
cgit v1.2.3


From 0f1053a90b63f7e80a7391d3b7248dd8c0d9d36a Mon Sep 17 00:00:00 2001
From: Priit Laes <plaes@plaes.org>
Date: Wed, 23 Aug 2017 20:23:30 +0300
Subject: dt-bindings: List devicetree binding for the CCU of Allwinner A20

Allwinner A20 is now driven by sunxi-ng CCU driver.

Add devicetree binding for it.

Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Priit Laes <plaes@plaes.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
---
 Documentation/devicetree/bindings/clock/sunxi-ccu.txt | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/clock/sunxi-ccu.txt b/Documentation/devicetree/bindings/clock/sunxi-ccu.txt
index a082260295b1..27128919994c 100644
--- a/Documentation/devicetree/bindings/clock/sunxi-ccu.txt
+++ b/Documentation/devicetree/bindings/clock/sunxi-ccu.txt
@@ -6,6 +6,7 @@ Required properties :
 		- "allwinner,sun5i-a10s-ccu"
 		- "allwinner,sun5i-a13-ccu"
 		- "allwinner,sun6i-a31-ccu"
+		- "allwinner,sun7i-a20-ccu"
 		- "allwinner,sun8i-a23-ccu"
 		- "allwinner,sun8i-a33-ccu"
 		- "allwinner,sun8i-a83t-ccu"
-- 
cgit v1.2.3


From de275d2357fbc2ae385251a38e85f320a6e5382c Mon Sep 17 00:00:00 2001
From: Priit Laes <plaes@plaes.org>
Date: Wed, 23 Aug 2017 20:23:31 +0300
Subject: dt-bindings: List devicetree binding for the CCU of Allwinner A10

Allwinner A10 is now driven by sunxi-ng CCU driver.

Add devicetree binding for it.

Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Priit Laes <plaes@plaes.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
---
 Documentation/devicetree/bindings/clock/sunxi-ccu.txt | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/clock/sunxi-ccu.txt b/Documentation/devicetree/bindings/clock/sunxi-ccu.txt
index 27128919994c..7eda08eb8a1e 100644
--- a/Documentation/devicetree/bindings/clock/sunxi-ccu.txt
+++ b/Documentation/devicetree/bindings/clock/sunxi-ccu.txt
@@ -3,6 +3,7 @@ Allwinner Clock Control Unit Binding
 
 Required properties :
 - compatible: must contain one of the following compatibles:
+		- "allwinner,sun4i-a10-ccu"
 		- "allwinner,sun5i-a10s-ccu"
 		- "allwinner,sun5i-a13-ccu"
 		- "allwinner,sun6i-a31-ccu"
-- 
cgit v1.2.3


From c84f5683f6e9fee78e054431d89121225ccb7464 Mon Sep 17 00:00:00 2001
From: Priit Laes <plaes@plaes.org>
Date: Wed, 23 Aug 2017 20:23:29 +0300
Subject: clk: sunxi-ng: Add sun4i/sun7i CCU driver

Introduce a clock controller driver for sun4i A10 and sun7i A20
series SoCs.

Signed-off-by: Priit Laes <plaes@plaes.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
---
 drivers/clk/sunxi-ng/Kconfig              |   13 +
 drivers/clk/sunxi-ng/Makefile             |    1 +
 drivers/clk/sunxi-ng/ccu-sun4i-a10.c      | 1456 +++++++++++++++++++++++++++++
 drivers/clk/sunxi-ng/ccu-sun4i-a10.h      |   61 ++
 include/dt-bindings/clock/sun4i-a10-ccu.h |  200 ++++
 include/dt-bindings/clock/sun7i-a20-ccu.h |   53 ++
 include/dt-bindings/reset/sun4i-a10-ccu.h |   69 ++
 7 files changed, 1853 insertions(+)
 create mode 100644 drivers/clk/sunxi-ng/ccu-sun4i-a10.c
 create mode 100644 drivers/clk/sunxi-ng/ccu-sun4i-a10.h
 create mode 100644 include/dt-bindings/clock/sun4i-a10-ccu.h
 create mode 100644 include/dt-bindings/clock/sun7i-a20-ccu.h
 create mode 100644 include/dt-bindings/reset/sun4i-a10-ccu.h

diff --git a/drivers/clk/sunxi-ng/Kconfig b/drivers/clk/sunxi-ng/Kconfig
index 7a360737fe3c..6427d0ebe2de 100644
--- a/drivers/clk/sunxi-ng/Kconfig
+++ b/drivers/clk/sunxi-ng/Kconfig
@@ -11,6 +11,19 @@ config SUN50I_A64_CCU
 	default ARM64 && ARCH_SUNXI
 	depends on (ARM64 && ARCH_SUNXI) || COMPILE_TEST
 
+config SUN4I_A10_CCU
+	bool "Support for the Allwinner A10/A20 CCU"
+	select SUNXI_CCU_DIV
+	select SUNXI_CCU_MULT
+	select SUNXI_CCU_NK
+	select SUNXI_CCU_NKM
+	select SUNXI_CCU_NM
+	select SUNXI_CCU_MP
+	select SUNXI_CCU_PHASE
+	default MACH_SUN4I
+	default MACH_SUN7I
+	depends on MACH_SUN4I || MACH_SUN7I || COMPILE_TEST
+
 config SUN5I_CCU
 	bool "Support for the Allwinner sun5i family CCM"
 	default MACH_SUN5I
diff --git a/drivers/clk/sunxi-ng/Makefile b/drivers/clk/sunxi-ng/Makefile
index 58741cd647c3..1fd8fe9c1e3e 100644
--- a/drivers/clk/sunxi-ng/Makefile
+++ b/drivers/clk/sunxi-ng/Makefile
@@ -19,6 +19,7 @@ lib-$(CONFIG_SUNXI_CCU)		+= ccu_mp.o
 
 # SoC support
 obj-$(CONFIG_SUN50I_A64_CCU)	+= ccu-sun50i-a64.o
+obj-$(CONFIG_SUN4I_A10_CCU)	+= ccu-sun4i-a10.o
 obj-$(CONFIG_SUN5I_CCU)		+= ccu-sun5i.o
 obj-$(CONFIG_SUN6I_A31_CCU)	+= ccu-sun6i-a31.o
 obj-$(CONFIG_SUN8I_A23_CCU)	+= ccu-sun8i-a23.o
diff --git a/drivers/clk/sunxi-ng/ccu-sun4i-a10.c b/drivers/clk/sunxi-ng/ccu-sun4i-a10.c
new file mode 100644
index 000000000000..286b0049b7b6
--- /dev/null
+++ b/drivers/clk/sunxi-ng/ccu-sun4i-a10.c
@@ -0,0 +1,1456 @@
+/*
+ * Copyright (c) 2017 Priit Laes <plaes@plaes.org>.
+ * Copyright (c) 2017 Maxime Ripard.
+ * Copyright (c) 2017 Jonathan Liu.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/of_address.h>
+
+#include "ccu_common.h"
+#include "ccu_reset.h"
+
+#include "ccu_div.h"
+#include "ccu_gate.h"
+#include "ccu_mp.h"
+#include "ccu_mult.h"
+#include "ccu_nk.h"
+#include "ccu_nkm.h"
+#include "ccu_nkmp.h"
+#include "ccu_nm.h"
+#include "ccu_phase.h"
+
+#include "ccu-sun4i-a10.h"
+
+static struct ccu_nkmp pll_core_clk = {
+	.enable		= BIT(31),
+	.n		= _SUNXI_CCU_MULT_OFFSET(8, 5, 0),
+	.k		= _SUNXI_CCU_MULT(4, 2),
+	.m		= _SUNXI_CCU_DIV(0, 2),
+	.p		= _SUNXI_CCU_DIV(16, 2),
+	.common		= {
+		.reg		= 0x000,
+		.hw.init	= CLK_HW_INIT("pll-core",
+					      "hosc",
+					      &ccu_nkmp_ops,
+					      0),
+	},
+};
+
+/*
+ * The Audio PLL is supposed to have 4 outputs: 3 fixed factors from
+ * the base (2x, 4x and 8x), and one variable divider (the one true
+ * pll audio).
+ *
+ * We don't have any need for the variable divider for now, so we just
+ * hardcode it to match with the clock names.
+ */
+#define SUN4I_PLL_AUDIO_REG	0x008
+static struct ccu_nm pll_audio_base_clk = {
+	.enable		= BIT(31),
+	.n		= _SUNXI_CCU_MULT_OFFSET(8, 7, 0),
+	.m		= _SUNXI_CCU_DIV_OFFSET(0, 5, 0),
+	.common		= {
+		.reg		= 0x008,
+		.hw.init	= CLK_HW_INIT("pll-audio-base",
+					      "hosc",
+					      &ccu_nm_ops,
+					      0),
+	},
+
+};
+
+static struct ccu_mult pll_video0_clk = {
+	.enable		= BIT(31),
+	.mult		= _SUNXI_CCU_MULT_OFFSET_MIN_MAX(0, 7, 0, 9, 127),
+	.frac		= _SUNXI_CCU_FRAC(BIT(15), BIT(14),
+					  270000000, 297000000),
+	.common		= {
+		.reg		= 0x010,
+		.features	= (CCU_FEATURE_FRACTIONAL |
+				   CCU_FEATURE_ALL_PREDIV),
+		.prediv		= 8,
+		.hw.init	= CLK_HW_INIT("pll-video0",
+					      "hosc",
+					      &ccu_mult_ops,
+					      0),
+	},
+};
+
+static struct ccu_nkmp pll_ve_sun4i_clk = {
+	.enable		= BIT(31),
+	.n		= _SUNXI_CCU_MULT_OFFSET(8, 5, 0),
+	.k		= _SUNXI_CCU_MULT(4, 2),
+	.m		= _SUNXI_CCU_DIV(0, 2),
+	.p		= _SUNXI_CCU_DIV(16, 2),
+	.common		= {
+		.reg		= 0x018,
+		.hw.init	= CLK_HW_INIT("pll-ve",
+					      "hosc",
+					      &ccu_nkmp_ops,
+					      0),
+	},
+};
+
+static struct ccu_nk pll_ve_sun7i_clk = {
+	.enable		= BIT(31),
+	.n		= _SUNXI_CCU_MULT_OFFSET(8, 5, 0),
+	.k		= _SUNXI_CCU_MULT(4, 2),
+	.common		= {
+		.reg		= 0x018,
+		.hw.init	= CLK_HW_INIT("pll-ve",
+					      "hosc",
+					      &ccu_nk_ops,
+					      0),
+	},
+};
+
+static struct ccu_nk pll_ddr_base_clk = {
+	.enable		= BIT(31),
+	.n		= _SUNXI_CCU_MULT_OFFSET(8, 5, 0),
+	.k		= _SUNXI_CCU_MULT(4, 2),
+	.common		= {
+		.reg		= 0x020,
+		.hw.init	= CLK_HW_INIT("pll-ddr-base",
+					      "hosc",
+					      &ccu_nk_ops,
+					      0),
+	},
+};
+
+static SUNXI_CCU_M(pll_ddr_clk, "pll-ddr", "pll-ddr-base", 0x020, 0, 2,
+		   CLK_IS_CRITICAL);
+
+static struct ccu_div pll_ddr_other_clk = {
+	.div		= _SUNXI_CCU_DIV_FLAGS(16, 2, CLK_DIVIDER_POWER_OF_TWO),
+	.common		= {
+		.reg		= 0x020,
+		.hw.init	= CLK_HW_INIT("pll-ddr-other", "pll-ddr-base",
+					      &ccu_div_ops,
+					      0),
+	},
+};
+
+static struct ccu_nk pll_periph_base_clk = {
+	.enable		= BIT(31),
+	.n		= _SUNXI_CCU_MULT_OFFSET(8, 5, 0),
+	.k		= _SUNXI_CCU_MULT(4, 2),
+	.common		= {
+		.reg		= 0x028,
+		.hw.init	= CLK_HW_INIT("pll-periph-base",
+					      "hosc",
+					      &ccu_nk_ops,
+					      0),
+	},
+};
+
+static CLK_FIXED_FACTOR(pll_periph_clk, "pll-periph", "pll-periph-base",
+			2, 1, CLK_SET_RATE_PARENT);
+
+/* Not documented on A10 */
+static struct ccu_div pll_periph_sata_clk = {
+	.enable		= BIT(14),
+	.div		= _SUNXI_CCU_DIV(0, 2),
+	.fixed_post_div	= 6,
+	.common		= {
+		.reg		= 0x028,
+		.features	= CCU_FEATURE_FIXED_POSTDIV,
+		.hw.init	= CLK_HW_INIT("pll-periph-sata",
+					      "pll-periph-base",
+					      &ccu_div_ops, 0),
+	},
+};
+
+static struct ccu_mult pll_video1_clk = {
+	.enable		= BIT(31),
+	.mult		= _SUNXI_CCU_MULT_OFFSET_MIN_MAX(0, 7, 0, 9, 127),
+	.frac		= _SUNXI_CCU_FRAC(BIT(15), BIT(14),
+				  270000000, 297000000),
+	.common		= {
+		.reg		= 0x030,
+		.features	= (CCU_FEATURE_FRACTIONAL |
+				   CCU_FEATURE_ALL_PREDIV),
+		.prediv		= 8,
+		.hw.init	= CLK_HW_INIT("pll-video1",
+					      "hosc",
+					      &ccu_mult_ops,
+					      0),
+	},
+};
+
+/* Not present on A10 */
+static struct ccu_nk pll_gpu_clk = {
+	.enable		= BIT(31),
+	.n		= _SUNXI_CCU_MULT_OFFSET(8, 5, 0),
+	.k		= _SUNXI_CCU_MULT(4, 2),
+	.common		= {
+		.reg		= 0x040,
+		.hw.init	= CLK_HW_INIT("pll-gpu",
+					      "hosc",
+					      &ccu_nk_ops,
+					      0),
+	},
+};
+
+static SUNXI_CCU_GATE(hosc_clk,	"hosc",	"osc24M", 0x050, BIT(0), 0);
+
+static const char *const cpu_parents[] = { "osc32k", "hosc",
+					   "pll-core", "pll-periph" };
+static const struct ccu_mux_fixed_prediv cpu_predivs[] = {
+	{ .index = 3, .div = 3, },
+};
+
+#define SUN4I_AHB_REG		0x054
+static struct ccu_mux cpu_clk = {
+	.mux		= {
+		.shift		= 16,
+		.width		= 2,
+		.fixed_predivs	= cpu_predivs,
+		.n_predivs	= ARRAY_SIZE(cpu_predivs),
+	},
+	.common		= {
+		.reg		= 0x054,
+		.features	= CCU_FEATURE_FIXED_PREDIV,
+		.hw.init	= CLK_HW_INIT_PARENTS("cpu",
+						      cpu_parents,
+						      &ccu_mux_ops,
+						      CLK_IS_CRITICAL),
+	}
+};
+
+static SUNXI_CCU_M(axi_clk, "axi", "cpu", 0x054, 0, 2, 0);
+
+static struct ccu_div ahb_sun4i_clk = {
+	.div		= _SUNXI_CCU_DIV_FLAGS(4, 2, CLK_DIVIDER_POWER_OF_TWO),
+	.common		= {
+		.reg		= 0x054,
+		.hw.init	= CLK_HW_INIT("ahb", "axi", &ccu_div_ops, 0),
+	},
+};
+
+static const char *const ahb_sun7i_parents[] = { "axi", "pll-periph",
+						 "pll-periph" };
+static const struct ccu_mux_fixed_prediv ahb_sun7i_predivs[] = {
+	{ .index = 1, .div = 2, },
+	{ /* Sentinel */ },
+};
+static struct ccu_div ahb_sun7i_clk = {
+	.div		= _SUNXI_CCU_DIV_FLAGS(4, 2, CLK_DIVIDER_POWER_OF_TWO),
+	.mux		= {
+		.shift		= 6,
+		.width		= 2,
+		.fixed_predivs	= ahb_sun7i_predivs,
+		.n_predivs	= ARRAY_SIZE(ahb_sun7i_predivs),
+	},
+
+	.common		= {
+		.reg		= 0x054,
+		.hw.init	= CLK_HW_INIT_PARENTS("ahb",
+						      ahb_sun7i_parents,
+						      &ccu_div_ops,
+						      0),
+	},
+};
+
+static struct clk_div_table apb0_div_table[] = {
+	{ .val = 0, .div = 2 },
+	{ .val = 1, .div = 2 },
+	{ .val = 2, .div = 4 },
+	{ .val = 3, .div = 8 },
+	{ /* Sentinel */ },
+};
+static SUNXI_CCU_DIV_TABLE(apb0_clk, "apb0", "ahb",
+			   0x054, 8, 2, apb0_div_table, 0);
+
+static const char *const apb1_parents[] = { "hosc", "pll-periph", "osc32k" };
+static SUNXI_CCU_MP_WITH_MUX(apb1_clk, "apb1", apb1_parents, 0x058,
+			     0, 5,	/* M */
+			     16, 2,	/* P */
+			     24, 2,	/* mux */
+			     0);
+
+/* Not present on A20 */
+static SUNXI_CCU_GATE(axi_dram_clk,	"axi-dram",	"ahb",
+		      0x05c, BIT(31), 0);
+
+static SUNXI_CCU_GATE(ahb_otg_clk,	"ahb-otg",	"ahb",
+		      0x060, BIT(0), 0);
+static SUNXI_CCU_GATE(ahb_ehci0_clk,	"ahb-ehci0",	"ahb",
+		      0x060, BIT(1), 0);
+static SUNXI_CCU_GATE(ahb_ohci0_clk,	"ahb-ohci0",	"ahb",
+		      0x060, BIT(2), 0);
+static SUNXI_CCU_GATE(ahb_ehci1_clk,	"ahb-ehci1",	"ahb",
+		      0x060, BIT(3), 0);
+static SUNXI_CCU_GATE(ahb_ohci1_clk,	"ahb-ohci1",	"ahb",
+		      0x060, BIT(4), 0);
+static SUNXI_CCU_GATE(ahb_ss_clk,	"ahb-ss",	"ahb",
+		      0x060, BIT(5), 0);
+static SUNXI_CCU_GATE(ahb_dma_clk,	"ahb-dma",	"ahb",
+		      0x060, BIT(6), 0);
+static SUNXI_CCU_GATE(ahb_bist_clk,	"ahb-bist",	"ahb",
+		      0x060, BIT(7), 0);
+static SUNXI_CCU_GATE(ahb_mmc0_clk,	"ahb-mmc0",	"ahb",
+		      0x060, BIT(8), 0);
+static SUNXI_CCU_GATE(ahb_mmc1_clk,	"ahb-mmc1",	"ahb",
+		      0x060, BIT(9), 0);
+static SUNXI_CCU_GATE(ahb_mmc2_clk,	"ahb-mmc2",	"ahb",
+		      0x060, BIT(10), 0);
+static SUNXI_CCU_GATE(ahb_mmc3_clk,	"ahb-mmc3",	"ahb",
+		      0x060, BIT(11), 0);
+static SUNXI_CCU_GATE(ahb_ms_clk,	"ahb-ms",	"ahb",
+		      0x060, BIT(12), 0);
+static SUNXI_CCU_GATE(ahb_nand_clk,	"ahb-nand",	"ahb",
+		      0x060, BIT(13), 0);
+static SUNXI_CCU_GATE(ahb_sdram_clk,	"ahb-sdram",	"ahb",
+		      0x060, BIT(14), CLK_IS_CRITICAL);
+
+static SUNXI_CCU_GATE(ahb_ace_clk,	"ahb-ace",	"ahb",
+		      0x060, BIT(16), 0);
+static SUNXI_CCU_GATE(ahb_emac_clk,	"ahb-emac",	"ahb",
+		      0x060, BIT(17), 0);
+static SUNXI_CCU_GATE(ahb_ts_clk,	"ahb-ts",	"ahb",
+		      0x060, BIT(18), 0);
+static SUNXI_CCU_GATE(ahb_spi0_clk,	"ahb-spi0",	"ahb",
+		      0x060, BIT(20), 0);
+static SUNXI_CCU_GATE(ahb_spi1_clk,	"ahb-spi1",	"ahb",
+		      0x060, BIT(21), 0);
+static SUNXI_CCU_GATE(ahb_spi2_clk,	"ahb-spi2",	"ahb",
+		      0x060, BIT(22), 0);
+static SUNXI_CCU_GATE(ahb_spi3_clk,	"ahb-spi3",	"ahb",
+		      0x060, BIT(23), 0);
+static SUNXI_CCU_GATE(ahb_pata_clk,	"ahb-pata",	"ahb",
+		      0x060, BIT(24), 0);
+/* Not documented on A20 */
+static SUNXI_CCU_GATE(ahb_sata_clk,	"ahb-sata",	"ahb",
+		      0x060, BIT(25), 0);
+/* Not present on A20 */
+static SUNXI_CCU_GATE(ahb_gps_clk,	"ahb-gps",	"ahb",
+		      0x060, BIT(26), 0);
+/* Not present on A10 */
+static SUNXI_CCU_GATE(ahb_hstimer_clk,	"ahb-hstimer",	"ahb",
+		      0x060, BIT(28), 0);
+
+static SUNXI_CCU_GATE(ahb_ve_clk,	"ahb-ve",	"ahb",
+		      0x064, BIT(0), 0);
+static SUNXI_CCU_GATE(ahb_tvd_clk,	"ahb-tvd",	"ahb",
+		      0x064, BIT(1), 0);
+static SUNXI_CCU_GATE(ahb_tve0_clk,	"ahb-tve0",	"ahb",
+		      0x064, BIT(2), 0);
+static SUNXI_CCU_GATE(ahb_tve1_clk,	"ahb-tve1",	"ahb",
+		      0x064, BIT(3), 0);
+static SUNXI_CCU_GATE(ahb_lcd0_clk,	"ahb-lcd0",	"ahb",
+		      0x064, BIT(4), 0);
+static SUNXI_CCU_GATE(ahb_lcd1_clk,	"ahb-lcd1",	"ahb",
+		      0x064, BIT(5), 0);
+static SUNXI_CCU_GATE(ahb_csi0_clk,	"ahb-csi0",	"ahb",
+		      0x064, BIT(8), 0);
+static SUNXI_CCU_GATE(ahb_csi1_clk,	"ahb-csi1",	"ahb",
+		      0x064, BIT(9), 0);
+/* Not present on A10 */
+static SUNXI_CCU_GATE(ahb_hdmi1_clk,	"ahb-hdmi1",	"ahb",
+		      0x064, BIT(10), 0);
+static SUNXI_CCU_GATE(ahb_hdmi0_clk,	"ahb-hdmi0",	"ahb",
+		      0x064, BIT(11), 0);
+static SUNXI_CCU_GATE(ahb_de_be0_clk,	"ahb-de-be0",	"ahb",
+		      0x064, BIT(12), 0);
+static SUNXI_CCU_GATE(ahb_de_be1_clk,	"ahb-de-be1",	"ahb",
+		      0x064, BIT(13), 0);
+static SUNXI_CCU_GATE(ahb_de_fe0_clk,	"ahb-de-fe0",	"ahb",
+		      0x064, BIT(14), 0);
+static SUNXI_CCU_GATE(ahb_de_fe1_clk,	"ahb-de-fe1",	"ahb",
+		      0x064, BIT(15), 0);
+/* Not present on A10 */
+static SUNXI_CCU_GATE(ahb_gmac_clk,	"ahb-gmac",	"ahb",
+		      0x064, BIT(17), 0);
+static SUNXI_CCU_GATE(ahb_mp_clk,	"ahb-mp",	"ahb",
+		      0x064, BIT(18), 0);
+static SUNXI_CCU_GATE(ahb_gpu_clk,	"ahb-gpu",	"ahb",
+		      0x064, BIT(20), 0);
+
+static SUNXI_CCU_GATE(apb0_codec_clk,	"apb0-codec",	"apb0",
+		      0x068, BIT(0), 0);
+static SUNXI_CCU_GATE(apb0_spdif_clk,	"apb0-spdif",	"apb0",
+		      0x068, BIT(1), 0);
+static SUNXI_CCU_GATE(apb0_ac97_clk,	"apb0-ac97",	"apb0",
+		      0x068, BIT(2), 0);
+static SUNXI_CCU_GATE(apb0_i2s0_clk,	"apb0-i2s0",	"apb0",
+		      0x068, BIT(3), 0);
+/* Not present on A10 */
+static SUNXI_CCU_GATE(apb0_i2s1_clk,	"apb0-i2s1",	"apb0",
+		      0x068, BIT(4), 0);
+static SUNXI_CCU_GATE(apb0_pio_clk,	"apb0-pio",	"apb0",
+		      0x068, BIT(5), 0);
+static SUNXI_CCU_GATE(apb0_ir0_clk,	"apb0-ir0",	"apb0",
+		      0x068, BIT(6), 0);
+static SUNXI_CCU_GATE(apb0_ir1_clk,	"apb0-ir1",	"apb0",
+		      0x068, BIT(7), 0);
+/* Not present on A10 */
+static SUNXI_CCU_GATE(apb0_i2s2_clk,	"apb0-i2s2",	"apb0",
+		      0x068, BIT(8), 0);
+static SUNXI_CCU_GATE(apb0_keypad_clk,	"apb0-keypad",	"apb0",
+		      0x068, BIT(10), 0);
+
+static SUNXI_CCU_GATE(apb1_i2c0_clk,	"apb1-i2c0",	"apb1",
+		      0x06c, BIT(0), 0);
+static SUNXI_CCU_GATE(apb1_i2c1_clk,	"apb1-i2c1",	"apb1",
+		      0x06c, BIT(1), 0);
+static SUNXI_CCU_GATE(apb1_i2c2_clk,	"apb1-i2c2",	"apb1",
+		      0x06c, BIT(2), 0);
+/* Not present on A10 */
+static SUNXI_CCU_GATE(apb1_i2c3_clk,	"apb1-i2c3",	"apb1",
+		      0x06c, BIT(3), 0);
+static SUNXI_CCU_GATE(apb1_can_clk,	"apb1-can",	"apb1",
+		      0x06c, BIT(4), 0);
+static SUNXI_CCU_GATE(apb1_scr_clk,	"apb1-scr",	"apb1",
+		      0x06c, BIT(5), 0);
+static SUNXI_CCU_GATE(apb1_ps20_clk,	"apb1-ps20",	"apb1",
+		      0x06c, BIT(6), 0);
+static SUNXI_CCU_GATE(apb1_ps21_clk,	"apb1-ps21",	"apb1",
+		      0x06c, BIT(7), 0);
+/* Not present on A10 */
+static SUNXI_CCU_GATE(apb1_i2c4_clk,	"apb1-i2c4",	"apb1",
+		      0x06c, BIT(15), 0);
+static SUNXI_CCU_GATE(apb1_uart0_clk,	"apb1-uart0",	"apb1",
+		      0x06c, BIT(16), 0);
+static SUNXI_CCU_GATE(apb1_uart1_clk,	"apb1-uart1",	"apb1",
+		      0x06c, BIT(17), 0);
+static SUNXI_CCU_GATE(apb1_uart2_clk,	"apb1-uart2",	"apb1",
+		      0x06c, BIT(18), 0);
+static SUNXI_CCU_GATE(apb1_uart3_clk,	"apb1-uart3",	"apb1",
+		      0x06c, BIT(19), 0);
+static SUNXI_CCU_GATE(apb1_uart4_clk,	"apb1-uart4",	"apb1",
+		      0x06c, BIT(20), 0);
+static SUNXI_CCU_GATE(apb1_uart5_clk,	"apb1-uart5",	"apb1",
+		      0x06c, BIT(21), 0);
+static SUNXI_CCU_GATE(apb1_uart6_clk,	"apb1-uart6",	"apb1",
+		      0x06c, BIT(22), 0);
+static SUNXI_CCU_GATE(apb1_uart7_clk,	"apb1-uart7",	"apb1",
+		      0x06c, BIT(23), 0);
+
+static const char *const mod0_default_parents[] = { "hosc", "pll-periph",
+						     "pll-ddr-other" };
+static SUNXI_CCU_MP_WITH_MUX_GATE(nand_clk, "nand", mod0_default_parents, 0x080,
+				  0, 4,		/* M */
+				  16, 2,	/* P */
+				  24, 2,	/* mux */
+				  BIT(31),	/* gate */
+				  0);
+
+/* Undocumented on A10 */
+static SUNXI_CCU_MP_WITH_MUX_GATE(ms_clk, "ms", mod0_default_parents, 0x084,
+				  0, 4,		/* M */
+				  16, 2,	/* P */
+				  24, 2,	/* mux */
+				  BIT(31),	/* gate */
+				  0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(mmc0_clk, "mmc0", mod0_default_parents, 0x088,
+				  0, 4,		/* M */
+				  16, 2,	/* P */
+				  24, 2,	/* mux */
+				  BIT(31),	/* gate */
+				  0);
+
+/* MMC output and sample clocks are not present on A10 */
+static SUNXI_CCU_PHASE(mmc0_output_clk, "mmc0_output", "mmc0",
+		       0x088, 8, 3, 0);
+static SUNXI_CCU_PHASE(mmc0_sample_clk, "mmc0_sample", "mmc0",
+		       0x088, 20, 3, 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(mmc1_clk, "mmc1", mod0_default_parents, 0x08c,
+				  0, 4,		/* M */
+				  16, 2,	/* P */
+				  24, 2,	/* mux */
+				  BIT(31),	/* gate */
+				  0);
+
+/* MMC output and sample clocks are not present on A10 */
+static SUNXI_CCU_PHASE(mmc1_output_clk, "mmc1_output", "mmc1",
+		       0x08c, 8, 3, 0);
+static SUNXI_CCU_PHASE(mmc1_sample_clk, "mmc1_sample", "mmc1",
+		       0x08c, 20, 3, 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(mmc2_clk, "mmc2", mod0_default_parents, 0x090,
+				  0, 4,		/* M */
+				  16, 2,	/* P */
+				  24, 2,	/* mux */
+				  BIT(31),	/* gate */
+				  0);
+
+/* MMC output and sample clocks are not present on A10 */
+static SUNXI_CCU_PHASE(mmc2_output_clk, "mmc2_output", "mmc2",
+		       0x090, 8, 3, 0);
+static SUNXI_CCU_PHASE(mmc2_sample_clk, "mmc2_sample", "mmc2",
+		       0x090, 20, 3, 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(mmc3_clk, "mmc3", mod0_default_parents, 0x094,
+				  0, 4,		/* M */
+				  16, 2,	/* P */
+				  24, 2,	/* mux */
+				  BIT(31),	/* gate */
+				  0);
+
+/* MMC output and sample clocks are not present on A10 */
+static SUNXI_CCU_PHASE(mmc3_output_clk, "mmc3_output", "mmc3",
+		       0x094, 8, 3, 0);
+static SUNXI_CCU_PHASE(mmc3_sample_clk, "mmc3_sample", "mmc3",
+		       0x094, 20, 3, 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(ts_clk, "ts", mod0_default_parents, 0x098,
+				  0, 4,		/* M */
+				  16, 2,	/* P */
+				  24, 2,	/* mux */
+				  BIT(31),	/* gate */
+				  0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(ss_clk, "ss", mod0_default_parents, 0x09c,
+				  0, 4,		/* M */
+				  16, 2,	/* P */
+				  24, 2,	/* mux */
+				  BIT(31),	/* gate */
+				  0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(spi0_clk, "spi0", mod0_default_parents, 0x0a0,
+				  0, 4,		/* M */
+				  16, 2,	/* P */
+				  24, 2,	/* mux */
+				  BIT(31),	/* gate */
+				  0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(spi1_clk, "spi1", mod0_default_parents, 0x0a4,
+				  0, 4,		/* M */
+				  16, 2,	/* P */
+				  24, 2,	/* mux */
+				  BIT(31),	/* gate */
+				  0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(spi2_clk, "spi2", mod0_default_parents, 0x0a8,
+				  0, 4,		/* M */
+				  16, 2,	/* P */
+				  24, 2,	/* mux */
+				  BIT(31),	/* gate */
+				  0);
+
+/* Undocumented on A10 */
+static SUNXI_CCU_MP_WITH_MUX_GATE(pata_clk, "pata", mod0_default_parents, 0x0ac,
+				  0, 4,		/* M */
+				  16, 2,	/* P */
+				  24, 2,	/* mux */
+				  BIT(31),	/* gate */
+				  0);
+
+/* TODO: Check whether A10 actually supports osc32k as 4th parent? */
+static const char *const ir_parents_sun4i[] = { "hosc", "pll-periph",
+						"pll-ddr-other" };
+static SUNXI_CCU_MP_WITH_MUX_GATE(ir0_sun4i_clk, "ir0", ir_parents_sun4i, 0x0b0,
+				  0, 4,		/* M */
+				  16, 2,	/* P */
+				  24, 2,	/* mux */
+				  BIT(31),	/* gate */
+				  0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(ir1_sun4i_clk, "ir1", ir_parents_sun4i, 0x0b4,
+				  0, 4,		/* M */
+				  16, 2,	/* P */
+				  24, 2,	/* mux */
+				  BIT(31),	/* gate */
+				  0);
+static const char *const ir_parents_sun7i[] = { "hosc", "pll-periph",
+						"pll-ddr-other", "osc32k" };
+static SUNXI_CCU_MP_WITH_MUX_GATE(ir0_sun7i_clk, "ir0", ir_parents_sun7i, 0x0b0,
+				  0, 4,		/* M */
+				  16, 2,	/* P */
+				  24, 2,	/* mux */
+				  BIT(31),	/* gate */
+				  0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(ir1_sun7i_clk, "ir1", ir_parents_sun7i, 0x0b4,
+				  0, 4,		/* M */
+				  16, 2,	/* P */
+				  24, 2,	/* mux */
+				  BIT(31),	/* gate */
+				  0);
+
+static const char *const audio_parents[] = { "pll-audio-8x", "pll-audio-4x",
+					      "pll-audio-2x", "pll-audio" };
+static SUNXI_CCU_MUX_WITH_GATE(i2s0_clk, "i2s0", audio_parents,
+			       0x0b8, 16, 2, BIT(31), CLK_SET_RATE_PARENT);
+
+static SUNXI_CCU_MUX_WITH_GATE(ac97_clk, "ac97", audio_parents,
+			       0x0bc, 16, 2, BIT(31), CLK_SET_RATE_PARENT);
+
+/* Undocumented on A10 */
+static SUNXI_CCU_MUX_WITH_GATE(spdif_clk, "spdif", audio_parents,
+			       0x0c0, 16, 2, BIT(31), CLK_SET_RATE_PARENT);
+
+static const char *const keypad_parents[] = { "hosc", "losc"};
+static const u8 keypad_table[] = { 0, 2 };
+static struct ccu_mp keypad_clk = {
+	.enable		= BIT(31),
+	.m		= _SUNXI_CCU_DIV(0, 5),
+	.p		= _SUNXI_CCU_DIV(16, 2),
+	.mux		= _SUNXI_CCU_MUX_TABLE(24, 2, keypad_table),
+	.common		= {
+		.reg		= 0x0c4,
+		.hw.init	= CLK_HW_INIT_PARENTS("keypad",
+						      keypad_parents,
+						      &ccu_mp_ops,
+						      0),
+	},
+};
+
+/*
+ * SATA supports external clock as parent via BIT(24) and is probably an
+ * optional crystal or oscillator that can be connected to the
+ * SATA-CLKM / SATA-CLKP pins.
+ */
+static const char *const sata_parents[] = {"pll-periph-sata", "sata-ext"};
+static SUNXI_CCU_MUX_WITH_GATE(sata_clk, "sata", sata_parents,
+			       0x0c8, 24, 1, BIT(31), CLK_SET_RATE_PARENT);
+
+
+static SUNXI_CCU_GATE(usb_ohci0_clk,	"usb-ohci0",	"pll-periph",
+		      0x0cc, BIT(6), 0);
+static SUNXI_CCU_GATE(usb_ohci1_clk,	"usb-ohci1",	"pll-periph",
+		      0x0cc, BIT(7), 0);
+static SUNXI_CCU_GATE(usb_phy_clk,	"usb-phy",	"pll-periph",
+		      0x0cc, BIT(8), 0);
+
+/* TODO: GPS CLK 0x0d0 */
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(spi3_clk, "spi3", mod0_default_parents, 0x0d4,
+				  0, 4,		/* M */
+				  16, 2,	/* P */
+				  24, 2,	/* mux */
+				  BIT(31),	/* gate */
+				  0);
+
+/* Not present on A10 */
+static SUNXI_CCU_MUX_WITH_GATE(i2s1_clk, "i2s1", audio_parents,
+			       0x0d8, 16, 2, BIT(31), CLK_SET_RATE_PARENT);
+
+/* Not present on A10 */
+static SUNXI_CCU_MUX_WITH_GATE(i2s2_clk, "i2s2", audio_parents,
+			       0x0dc, 16, 2, BIT(31), CLK_SET_RATE_PARENT);
+
+static SUNXI_CCU_GATE(dram_ve_clk,	"dram-ve",	"pll-ddr",
+		      0x100, BIT(0), 0);
+static SUNXI_CCU_GATE(dram_csi0_clk,	"dram-csi0",	"pll-ddr",
+		      0x100, BIT(1), 0);
+static SUNXI_CCU_GATE(dram_csi1_clk,	"dram-csi1",	"pll-ddr",
+		      0x100, BIT(2), 0);
+static SUNXI_CCU_GATE(dram_ts_clk,	"dram-ts",	"pll-ddr",
+		      0x100, BIT(3), 0);
+static SUNXI_CCU_GATE(dram_tvd_clk,	"dram-tvd",	"pll-ddr",
+		      0x100, BIT(4), 0);
+static SUNXI_CCU_GATE(dram_tve0_clk,	"dram-tve0",	"pll-ddr",
+		      0x100, BIT(5), 0);
+static SUNXI_CCU_GATE(dram_tve1_clk,	"dram-tve1",	"pll-ddr",
+		      0x100, BIT(6), 0);
+
+/* Clock seems to be critical only on sun4i */
+static SUNXI_CCU_GATE(dram_out_clk,	"dram-out",	"pll-ddr",
+		      0x100, BIT(15), CLK_IS_CRITICAL);
+static SUNXI_CCU_GATE(dram_de_fe1_clk,	"dram-de-fe1",	"pll-ddr",
+		      0x100, BIT(24), 0);
+static SUNXI_CCU_GATE(dram_de_fe0_clk,	"dram-de-fe0",	"pll-ddr",
+		      0x100, BIT(25), 0);
+static SUNXI_CCU_GATE(dram_de_be0_clk,	"dram-de-be0",	"pll-ddr",
+		      0x100, BIT(26), 0);
+static SUNXI_CCU_GATE(dram_de_be1_clk,	"dram-de-be1",	"pll-ddr",
+		      0x100, BIT(27), 0);
+static SUNXI_CCU_GATE(dram_mp_clk,	"dram-mp",	"pll-ddr",
+		      0x100, BIT(28), 0);
+static SUNXI_CCU_GATE(dram_ace_clk,	"dram-ace",	"pll-ddr",
+		      0x100, BIT(29), 0);
+
+static const char *const de_parents[] = { "pll-video0", "pll-video1",
+					   "pll-ddr-other" };
+static SUNXI_CCU_M_WITH_MUX_GATE(de_be0_clk, "de-be0", de_parents,
+				 0x104, 0, 4, 24, 2, BIT(31), 0);
+
+static SUNXI_CCU_M_WITH_MUX_GATE(de_be1_clk, "de-be1", de_parents,
+				 0x108, 0, 4, 24, 2, BIT(31), 0);
+
+static SUNXI_CCU_M_WITH_MUX_GATE(de_fe0_clk, "de-fe0", de_parents,
+				 0x10c, 0, 4, 24, 2, BIT(31), 0);
+
+static SUNXI_CCU_M_WITH_MUX_GATE(de_fe1_clk, "de-fe1", de_parents,
+				 0x110, 0, 4, 24, 2, BIT(31), 0);
+
+/* Undocumented on A10 */
+static SUNXI_CCU_M_WITH_MUX_GATE(de_mp_clk, "de-mp", de_parents,
+				 0x114, 0, 4, 24, 2, BIT(31), 0);
+
+static const char *const disp_parents[] = { "pll-video0", "pll-video1",
+					    "pll-video0-2x", "pll-video1-2x" };
+static SUNXI_CCU_MUX_WITH_GATE(tcon0_ch0_clk, "tcon0-ch0-sclk", disp_parents,
+			       0x118, 24, 2, BIT(31), CLK_SET_RATE_PARENT);
+static SUNXI_CCU_MUX_WITH_GATE(tcon1_ch0_clk, "tcon1-ch0-sclk", disp_parents,
+			       0x11c, 24, 2, BIT(31), CLK_SET_RATE_PARENT);
+
+static const char *const csi_sclk_parents[] = { "pll-video0", "pll-ve",
+						"pll-ddr-other", "pll-periph" };
+
+static SUNXI_CCU_M_WITH_MUX_GATE(csi_sclk_clk, "csi-sclk",
+				 csi_sclk_parents,
+				 0x120, 0, 4, 24, 2, BIT(31), 0);
+
+/* TVD clock setup for A10 */
+static const char *const tvd_parents[] = { "pll-video0", "pll-video1" };
+static SUNXI_CCU_MUX_WITH_GATE(tvd_sun4i_clk, "tvd", tvd_parents,
+			       0x128, 24, 1, BIT(31), 0);
+
+/* TVD clock setup for A20 */
+static SUNXI_CCU_MP_WITH_MUX_GATE(tvd_sclk2_sun7i_clk,
+				  "tvd-sclk2", tvd_parents,
+				  0x128,
+				  0, 4,		/* M */
+				  16, 4,	/* P */
+				  8, 1,		/* mux */
+				  BIT(15),	/* gate */
+				  0);
+
+static SUNXI_CCU_M_WITH_GATE(tvd_sclk1_sun7i_clk, "tvd-sclk1", "tvd-sclk2",
+			     0x128, 0, 4, BIT(31), 0);
+
+static SUNXI_CCU_M_WITH_MUX_GATE(tcon0_ch1_sclk2_clk, "tcon0-ch1-sclk2",
+				 disp_parents,
+				 0x12c, 0, 4, 24, 2, BIT(31),
+				 CLK_SET_RATE_PARENT);
+
+static SUNXI_CCU_M_WITH_GATE(tcon0_ch1_clk,
+			     "tcon0-ch1-sclk1", "tcon0-ch1-sclk2",
+			     0x12c, 11, 1, BIT(15),
+			     CLK_SET_RATE_PARENT);
+
+static SUNXI_CCU_M_WITH_MUX_GATE(tcon1_ch1_sclk2_clk, "tcon1-ch1-sclk2",
+				 disp_parents,
+				 0x130, 0, 4, 24, 2, BIT(31),
+				 CLK_SET_RATE_PARENT);
+
+static SUNXI_CCU_M_WITH_GATE(tcon1_ch1_clk,
+			     "tcon1-ch1-sclk1", "tcon1-ch1-sclk2",
+			     0x130, 11, 1, BIT(15),
+			     CLK_SET_RATE_PARENT);
+
+static const char *const csi_parents[] = { "hosc", "pll-video0", "pll-video1",
+					   "pll-video0-2x", "pll-video1-2x"};
+static const u8 csi_table[] = { 0, 1, 2, 5, 6};
+static SUNXI_CCU_M_WITH_MUX_TABLE_GATE(csi0_clk, "csi0",
+				       csi_parents, csi_table,
+				       0x134, 0, 5, 24, 3, BIT(31), 0);
+
+static SUNXI_CCU_M_WITH_MUX_TABLE_GATE(csi1_clk, "csi1",
+				       csi_parents, csi_table,
+				       0x138, 0, 5, 24, 3, BIT(31), 0);
+
+static SUNXI_CCU_M_WITH_GATE(ve_clk, "ve", "pll-ve", 0x13c, 16, 8, BIT(31), 0);
+
+static SUNXI_CCU_GATE(codec_clk, "codec", "pll-audio",
+		      0x140, BIT(31), CLK_SET_RATE_PARENT);
+
+static SUNXI_CCU_GATE(avs_clk, "avs", "hosc", 0x144, BIT(31), 0);
+
+static const char *const ace_parents[] = { "pll-ve", "pll-ddr-other" };
+static SUNXI_CCU_M_WITH_MUX_GATE(ace_clk, "ace", ace_parents,
+				 0x148, 0, 4, 24, 1, BIT(31), 0);
+
+static SUNXI_CCU_M_WITH_MUX_GATE(hdmi_clk, "hdmi", disp_parents,
+				 0x150, 0, 4, 24, 2, BIT(31),
+				 CLK_SET_RATE_PARENT);
+
+static const char *const gpu_parents_sun4i[] = { "pll-video0", "pll-ve",
+						 "pll-ddr-other",
+						 "pll-video1" };
+static SUNXI_CCU_M_WITH_MUX_GATE(gpu_sun4i_clk, "gpu", gpu_parents_sun4i,
+				 0x154, 0, 4, 24, 2, BIT(31),
+				 CLK_SET_RATE_PARENT);
+
+static const char *const gpu_parents_sun7i[] = { "pll-video0", "pll-ve",
+						 "pll-ddr-other", "pll-video1",
+						 "pll-gpu" };
+static const u8 gpu_table_sun7i[] = { 0, 1, 2, 3, 4 };
+static SUNXI_CCU_M_WITH_MUX_TABLE_GATE(gpu_sun7i_clk, "gpu",
+				       gpu_parents_sun7i, gpu_table_sun7i,
+				       0x154, 0, 4, 24, 3, BIT(31),
+				       CLK_SET_RATE_PARENT);
+
+static const char *const mbus_sun4i_parents[] = { "hosc", "pll-periph",
+						  "pll-ddr-other" };
+static SUNXI_CCU_MP_WITH_MUX_GATE(mbus_sun4i_clk, "mbus", mbus_sun4i_parents,
+				  0x15c, 0, 4, 16, 2, 24, 2, BIT(31),
+				  0);
+static const char *const mbus_sun7i_parents[] = { "hosc", "pll-periph-base",
+						  "pll-ddr-other" };
+static SUNXI_CCU_MP_WITH_MUX_GATE(mbus_sun7i_clk, "mbus", mbus_sun7i_parents,
+				  0x15c, 0, 4, 16, 2, 24, 2, BIT(31),
+				  CLK_IS_CRITICAL);
+
+static SUNXI_CCU_GATE(hdmi1_slow_clk, "hdmi1-slow", "hosc", 0x178, BIT(31), 0);
+
+static const char *const hdmi1_parents[] = { "pll-video0", "pll-video1" };
+static const u8 hdmi1_table[] = { 0, 1};
+static SUNXI_CCU_M_WITH_MUX_TABLE_GATE(hdmi1_clk, "hdmi1",
+				       hdmi1_parents, hdmi1_table,
+				       0x17c, 0, 4, 24, 2, BIT(31),
+				       CLK_SET_RATE_PARENT);
+
+static const char *const out_parents[] = { "hosc", "osc32k", "hosc" };
+static const struct ccu_mux_fixed_prediv clk_out_predivs[] = {
+	{ .index = 0, .div = 750, },
+};
+
+static struct ccu_mp out_a_clk = {
+	.enable		= BIT(31),
+	.m		= _SUNXI_CCU_DIV(8, 5),
+	.p		= _SUNXI_CCU_DIV(20, 2),
+	.mux		= {
+		.shift		= 24,
+		.width		= 2,
+		.fixed_predivs	= clk_out_predivs,
+		.n_predivs	= ARRAY_SIZE(clk_out_predivs),
+	},
+	.common		= {
+		.reg		= 0x1f0,
+		.features	= CCU_FEATURE_FIXED_PREDIV,
+		.hw.init	= CLK_HW_INIT_PARENTS("out-a",
+						      out_parents,
+						      &ccu_mp_ops,
+						      0),
+	},
+};
+static struct ccu_mp out_b_clk = {
+	.enable		= BIT(31),
+	.m		= _SUNXI_CCU_DIV(8, 5),
+	.p		= _SUNXI_CCU_DIV(20, 2),
+	.mux		= {
+		.shift		= 24,
+		.width		= 2,
+		.fixed_predivs	= clk_out_predivs,
+		.n_predivs	= ARRAY_SIZE(clk_out_predivs),
+	},
+	.common		= {
+		.reg		= 0x1f4,
+		.features	= CCU_FEATURE_FIXED_PREDIV,
+		.hw.init	= CLK_HW_INIT_PARENTS("out-b",
+						      out_parents,
+						      &ccu_mp_ops,
+						      0),
+	},
+};
+
+static struct ccu_common *sun4i_sun7i_ccu_clks[] = {
+	&hosc_clk.common,
+	&pll_core_clk.common,
+	&pll_audio_base_clk.common,
+	&pll_video0_clk.common,
+	&pll_ve_sun4i_clk.common,
+	&pll_ve_sun7i_clk.common,
+	&pll_ddr_base_clk.common,
+	&pll_ddr_clk.common,
+	&pll_ddr_other_clk.common,
+	&pll_periph_base_clk.common,
+	&pll_periph_sata_clk.common,
+	&pll_video1_clk.common,
+	&pll_gpu_clk.common,
+	&cpu_clk.common,
+	&axi_clk.common,
+	&axi_dram_clk.common,
+	&ahb_sun4i_clk.common,
+	&ahb_sun7i_clk.common,
+	&apb0_clk.common,
+	&apb1_clk.common,
+	&ahb_otg_clk.common,
+	&ahb_ehci0_clk.common,
+	&ahb_ohci0_clk.common,
+	&ahb_ehci1_clk.common,
+	&ahb_ohci1_clk.common,
+	&ahb_ss_clk.common,
+	&ahb_dma_clk.common,
+	&ahb_bist_clk.common,
+	&ahb_mmc0_clk.common,
+	&ahb_mmc1_clk.common,
+	&ahb_mmc2_clk.common,
+	&ahb_mmc3_clk.common,
+	&ahb_ms_clk.common,
+	&ahb_nand_clk.common,
+	&ahb_sdram_clk.common,
+	&ahb_ace_clk.common,
+	&ahb_emac_clk.common,
+	&ahb_ts_clk.common,
+	&ahb_spi0_clk.common,
+	&ahb_spi1_clk.common,
+	&ahb_spi2_clk.common,
+	&ahb_spi3_clk.common,
+	&ahb_pata_clk.common,
+	&ahb_sata_clk.common,
+	&ahb_gps_clk.common,
+	&ahb_hstimer_clk.common,
+	&ahb_ve_clk.common,
+	&ahb_tvd_clk.common,
+	&ahb_tve0_clk.common,
+	&ahb_tve1_clk.common,
+	&ahb_lcd0_clk.common,
+	&ahb_lcd1_clk.common,
+	&ahb_csi0_clk.common,
+	&ahb_csi1_clk.common,
+	&ahb_hdmi1_clk.common,
+	&ahb_hdmi0_clk.common,
+	&ahb_de_be0_clk.common,
+	&ahb_de_be1_clk.common,
+	&ahb_de_fe0_clk.common,
+	&ahb_de_fe1_clk.common,
+	&ahb_gmac_clk.common,
+	&ahb_mp_clk.common,
+	&ahb_gpu_clk.common,
+	&apb0_codec_clk.common,
+	&apb0_spdif_clk.common,
+	&apb0_ac97_clk.common,
+	&apb0_i2s0_clk.common,
+	&apb0_i2s1_clk.common,
+	&apb0_pio_clk.common,
+	&apb0_ir0_clk.common,
+	&apb0_ir1_clk.common,
+	&apb0_i2s2_clk.common,
+	&apb0_keypad_clk.common,
+	&apb1_i2c0_clk.common,
+	&apb1_i2c1_clk.common,
+	&apb1_i2c2_clk.common,
+	&apb1_i2c3_clk.common,
+	&apb1_can_clk.common,
+	&apb1_scr_clk.common,
+	&apb1_ps20_clk.common,
+	&apb1_ps21_clk.common,
+	&apb1_i2c4_clk.common,
+	&apb1_uart0_clk.common,
+	&apb1_uart1_clk.common,
+	&apb1_uart2_clk.common,
+	&apb1_uart3_clk.common,
+	&apb1_uart4_clk.common,
+	&apb1_uart5_clk.common,
+	&apb1_uart6_clk.common,
+	&apb1_uart7_clk.common,
+	&nand_clk.common,
+	&ms_clk.common,
+	&mmc0_clk.common,
+	&mmc0_output_clk.common,
+	&mmc0_sample_clk.common,
+	&mmc1_clk.common,
+	&mmc1_output_clk.common,
+	&mmc1_sample_clk.common,
+	&mmc2_clk.common,
+	&mmc2_output_clk.common,
+	&mmc2_sample_clk.common,
+	&mmc3_clk.common,
+	&mmc3_output_clk.common,
+	&mmc3_sample_clk.common,
+	&ts_clk.common,
+	&ss_clk.common,
+	&spi0_clk.common,
+	&spi1_clk.common,
+	&spi2_clk.common,
+	&pata_clk.common,
+	&ir0_sun4i_clk.common,
+	&ir1_sun4i_clk.common,
+	&ir0_sun7i_clk.common,
+	&ir1_sun7i_clk.common,
+	&i2s0_clk.common,
+	&ac97_clk.common,
+	&spdif_clk.common,
+	&keypad_clk.common,
+	&sata_clk.common,
+	&usb_ohci0_clk.common,
+	&usb_ohci1_clk.common,
+	&usb_phy_clk.common,
+	&spi3_clk.common,
+	&i2s1_clk.common,
+	&i2s2_clk.common,
+	&dram_ve_clk.common,
+	&dram_csi0_clk.common,
+	&dram_csi1_clk.common,
+	&dram_ts_clk.common,
+	&dram_tvd_clk.common,
+	&dram_tve0_clk.common,
+	&dram_tve1_clk.common,
+	&dram_out_clk.common,
+	&dram_de_fe1_clk.common,
+	&dram_de_fe0_clk.common,
+	&dram_de_be0_clk.common,
+	&dram_de_be1_clk.common,
+	&dram_mp_clk.common,
+	&dram_ace_clk.common,
+	&de_be0_clk.common,
+	&de_be1_clk.common,
+	&de_fe0_clk.common,
+	&de_fe1_clk.common,
+	&de_mp_clk.common,
+	&tcon0_ch0_clk.common,
+	&tcon1_ch0_clk.common,
+	&csi_sclk_clk.common,
+	&tvd_sun4i_clk.common,
+	&tvd_sclk1_sun7i_clk.common,
+	&tvd_sclk2_sun7i_clk.common,
+	&tcon0_ch1_sclk2_clk.common,
+	&tcon0_ch1_clk.common,
+	&tcon1_ch1_sclk2_clk.common,
+	&tcon1_ch1_clk.common,
+	&csi0_clk.common,
+	&csi1_clk.common,
+	&ve_clk.common,
+	&codec_clk.common,
+	&avs_clk.common,
+	&ace_clk.common,
+	&hdmi_clk.common,
+	&gpu_sun4i_clk.common,
+	&gpu_sun7i_clk.common,
+	&mbus_sun4i_clk.common,
+	&mbus_sun7i_clk.common,
+	&hdmi1_slow_clk.common,
+	&hdmi1_clk.common,
+	&out_a_clk.common,
+	&out_b_clk.common
+};
+
+/* Post-divider for pll-audio is hardcoded to 4 */
+static CLK_FIXED_FACTOR(pll_audio_clk, "pll-audio",
+			"pll-audio-base", 4, 1, CLK_SET_RATE_PARENT);
+static CLK_FIXED_FACTOR(pll_audio_2x_clk, "pll-audio-2x",
+			"pll-audio-base", 2, 1, CLK_SET_RATE_PARENT);
+static CLK_FIXED_FACTOR(pll_audio_4x_clk, "pll-audio-4x",
+			"pll-audio-base", 1, 1, CLK_SET_RATE_PARENT);
+static CLK_FIXED_FACTOR(pll_audio_8x_clk, "pll-audio-8x",
+			"pll-audio-base", 1, 2, CLK_SET_RATE_PARENT);
+static CLK_FIXED_FACTOR(pll_video0_2x_clk, "pll-video0-2x",
+			"pll-video0", 1, 2, CLK_SET_RATE_PARENT);
+static CLK_FIXED_FACTOR(pll_video1_2x_clk, "pll-video1-2x",
+			"pll-video1", 1, 2, CLK_SET_RATE_PARENT);
+
+
+static struct clk_hw_onecell_data sun4i_a10_hw_clks = {
+	.hws	= {
+		[CLK_HOSC]		= &hosc_clk.common.hw,
+		[CLK_PLL_CORE]		= &pll_core_clk.common.hw,
+		[CLK_PLL_AUDIO_BASE]	= &pll_audio_base_clk.common.hw,
+		[CLK_PLL_AUDIO]		= &pll_audio_clk.hw,
+		[CLK_PLL_AUDIO_2X]	= &pll_audio_2x_clk.hw,
+		[CLK_PLL_AUDIO_4X]	= &pll_audio_4x_clk.hw,
+		[CLK_PLL_AUDIO_8X]	= &pll_audio_8x_clk.hw,
+		[CLK_PLL_VIDEO0]	= &pll_video0_clk.common.hw,
+		[CLK_PLL_VIDEO0_2X]	= &pll_video0_2x_clk.hw,
+		[CLK_PLL_VE]		= &pll_ve_sun4i_clk.common.hw,
+		[CLK_PLL_DDR_BASE]	= &pll_ddr_base_clk.common.hw,
+		[CLK_PLL_DDR]		= &pll_ddr_clk.common.hw,
+		[CLK_PLL_DDR_OTHER]	= &pll_ddr_other_clk.common.hw,
+		[CLK_PLL_PERIPH_BASE]	= &pll_periph_base_clk.common.hw,
+		[CLK_PLL_PERIPH]	= &pll_periph_clk.hw,
+		[CLK_PLL_PERIPH_SATA]	= &pll_periph_sata_clk.common.hw,
+		[CLK_PLL_VIDEO1]	= &pll_video1_clk.common.hw,
+		[CLK_PLL_VIDEO1_2X]	= &pll_video1_2x_clk.hw,
+		[CLK_CPU]		= &cpu_clk.common.hw,
+		[CLK_AXI]		= &axi_clk.common.hw,
+		[CLK_AXI_DRAM]		= &axi_dram_clk.common.hw,
+		[CLK_AHB]		= &ahb_sun4i_clk.common.hw,
+		[CLK_APB0]		= &apb0_clk.common.hw,
+		[CLK_APB1]		= &apb1_clk.common.hw,
+		[CLK_AHB_OTG]		= &ahb_otg_clk.common.hw,
+		[CLK_AHB_EHCI0]		= &ahb_ehci0_clk.common.hw,
+		[CLK_AHB_OHCI0]		= &ahb_ohci0_clk.common.hw,
+		[CLK_AHB_EHCI1]		= &ahb_ehci1_clk.common.hw,
+		[CLK_AHB_OHCI1]		= &ahb_ohci1_clk.common.hw,
+		[CLK_AHB_SS]		= &ahb_ss_clk.common.hw,
+		[CLK_AHB_DMA]		= &ahb_dma_clk.common.hw,
+		[CLK_AHB_BIST]		= &ahb_bist_clk.common.hw,
+		[CLK_AHB_MMC0]		= &ahb_mmc0_clk.common.hw,
+		[CLK_AHB_MMC1]		= &ahb_mmc1_clk.common.hw,
+		[CLK_AHB_MMC2]		= &ahb_mmc2_clk.common.hw,
+		[CLK_AHB_MMC3]		= &ahb_mmc3_clk.common.hw,
+		[CLK_AHB_MS]		= &ahb_ms_clk.common.hw,
+		[CLK_AHB_NAND]		= &ahb_nand_clk.common.hw,
+		[CLK_AHB_SDRAM]		= &ahb_sdram_clk.common.hw,
+		[CLK_AHB_ACE]		= &ahb_ace_clk.common.hw,
+		[CLK_AHB_EMAC]		= &ahb_emac_clk.common.hw,
+		[CLK_AHB_TS]		= &ahb_ts_clk.common.hw,
+		[CLK_AHB_SPI0]		= &ahb_spi0_clk.common.hw,
+		[CLK_AHB_SPI1]		= &ahb_spi1_clk.common.hw,
+		[CLK_AHB_SPI2]		= &ahb_spi2_clk.common.hw,
+		[CLK_AHB_SPI3]		= &ahb_spi3_clk.common.hw,
+		[CLK_AHB_PATA]		= &ahb_pata_clk.common.hw,
+		[CLK_AHB_SATA]		= &ahb_sata_clk.common.hw,
+		[CLK_AHB_GPS]		= &ahb_gps_clk.common.hw,
+		[CLK_AHB_VE]		= &ahb_ve_clk.common.hw,
+		[CLK_AHB_TVD]		= &ahb_tvd_clk.common.hw,
+		[CLK_AHB_TVE0]		= &ahb_tve0_clk.common.hw,
+		[CLK_AHB_TVE1]		= &ahb_tve1_clk.common.hw,
+		[CLK_AHB_LCD0]		= &ahb_lcd0_clk.common.hw,
+		[CLK_AHB_LCD1]		= &ahb_lcd1_clk.common.hw,
+		[CLK_AHB_CSI0]		= &ahb_csi0_clk.common.hw,
+		[CLK_AHB_CSI1]		= &ahb_csi1_clk.common.hw,
+		[CLK_AHB_HDMI0]		= &ahb_hdmi0_clk.common.hw,
+		[CLK_AHB_DE_BE0]	= &ahb_de_be0_clk.common.hw,
+		[CLK_AHB_DE_BE1]	= &ahb_de_be1_clk.common.hw,
+		[CLK_AHB_DE_FE0]	= &ahb_de_fe0_clk.common.hw,
+		[CLK_AHB_DE_FE1]	= &ahb_de_fe1_clk.common.hw,
+		[CLK_AHB_MP]		= &ahb_mp_clk.common.hw,
+		[CLK_AHB_GPU]		= &ahb_gpu_clk.common.hw,
+		[CLK_APB0_CODEC]	= &apb0_codec_clk.common.hw,
+		[CLK_APB0_SPDIF]	= &apb0_spdif_clk.common.hw,
+		[CLK_APB0_AC97]		= &apb0_ac97_clk.common.hw,
+		[CLK_APB0_I2S0]		= &apb0_i2s0_clk.common.hw,
+		[CLK_APB0_PIO]		= &apb0_pio_clk.common.hw,
+		[CLK_APB0_IR0]		= &apb0_ir0_clk.common.hw,
+		[CLK_APB0_IR1]		= &apb0_ir1_clk.common.hw,
+		[CLK_APB0_KEYPAD]	= &apb0_keypad_clk.common.hw,
+		[CLK_APB1_I2C0]		= &apb1_i2c0_clk.common.hw,
+		[CLK_APB1_I2C1]		= &apb1_i2c1_clk.common.hw,
+		[CLK_APB1_I2C2]		= &apb1_i2c2_clk.common.hw,
+		[CLK_APB1_CAN]		= &apb1_can_clk.common.hw,
+		[CLK_APB1_SCR]		= &apb1_scr_clk.common.hw,
+		[CLK_APB1_PS20]		= &apb1_ps20_clk.common.hw,
+		[CLK_APB1_PS21]		= &apb1_ps21_clk.common.hw,
+		[CLK_APB1_UART0]	= &apb1_uart0_clk.common.hw,
+		[CLK_APB1_UART1]	= &apb1_uart1_clk.common.hw,
+		[CLK_APB1_UART2]	= &apb1_uart2_clk.common.hw,
+		[CLK_APB1_UART3]	= &apb1_uart3_clk.common.hw,
+		[CLK_APB1_UART4]	= &apb1_uart4_clk.common.hw,
+		[CLK_APB1_UART5]	= &apb1_uart5_clk.common.hw,
+		[CLK_APB1_UART6]	= &apb1_uart6_clk.common.hw,
+		[CLK_APB1_UART7]	= &apb1_uart7_clk.common.hw,
+		[CLK_NAND]		= &nand_clk.common.hw,
+		[CLK_MS]		= &ms_clk.common.hw,
+		[CLK_MMC0]		= &mmc0_clk.common.hw,
+		[CLK_MMC1]		= &mmc1_clk.common.hw,
+		[CLK_MMC2]		= &mmc2_clk.common.hw,
+		[CLK_MMC3]		= &mmc3_clk.common.hw,
+		[CLK_TS]		= &ts_clk.common.hw,
+		[CLK_SS]		= &ss_clk.common.hw,
+		[CLK_SPI0]		= &spi0_clk.common.hw,
+		[CLK_SPI1]		= &spi1_clk.common.hw,
+		[CLK_SPI2]		= &spi2_clk.common.hw,
+		[CLK_PATA]		= &pata_clk.common.hw,
+		[CLK_IR0]		= &ir0_sun4i_clk.common.hw,
+		[CLK_IR1]		= &ir1_sun4i_clk.common.hw,
+		[CLK_I2S0]		= &i2s0_clk.common.hw,
+		[CLK_AC97]		= &ac97_clk.common.hw,
+		[CLK_SPDIF]		= &spdif_clk.common.hw,
+		[CLK_KEYPAD]		= &keypad_clk.common.hw,
+		[CLK_SATA]		= &sata_clk.common.hw,
+		[CLK_USB_OHCI0]		= &usb_ohci0_clk.common.hw,
+		[CLK_USB_OHCI1]		= &usb_ohci1_clk.common.hw,
+		[CLK_USB_PHY]		= &usb_phy_clk.common.hw,
+		/* CLK_GPS is unimplemented */
+		[CLK_SPI3]		= &spi3_clk.common.hw,
+		[CLK_DRAM_VE]		= &dram_ve_clk.common.hw,
+		[CLK_DRAM_CSI0]		= &dram_csi0_clk.common.hw,
+		[CLK_DRAM_CSI1]		= &dram_csi1_clk.common.hw,
+		[CLK_DRAM_TS]		= &dram_ts_clk.common.hw,
+		[CLK_DRAM_TVD]		= &dram_tvd_clk.common.hw,
+		[CLK_DRAM_TVE0]		= &dram_tve0_clk.common.hw,
+		[CLK_DRAM_TVE1]		= &dram_tve1_clk.common.hw,
+		[CLK_DRAM_OUT]		= &dram_out_clk.common.hw,
+		[CLK_DRAM_DE_FE1]	= &dram_de_fe1_clk.common.hw,
+		[CLK_DRAM_DE_FE0]	= &dram_de_fe0_clk.common.hw,
+		[CLK_DRAM_DE_BE0]	= &dram_de_be0_clk.common.hw,
+		[CLK_DRAM_DE_BE1]	= &dram_de_be1_clk.common.hw,
+		[CLK_DRAM_MP]		= &dram_mp_clk.common.hw,
+		[CLK_DRAM_ACE]		= &dram_ace_clk.common.hw,
+		[CLK_DE_BE0]		= &de_be0_clk.common.hw,
+		[CLK_DE_BE1]		= &de_be1_clk.common.hw,
+		[CLK_DE_FE0]		= &de_fe0_clk.common.hw,
+		[CLK_DE_FE1]		= &de_fe1_clk.common.hw,
+		[CLK_DE_MP]		= &de_mp_clk.common.hw,
+		[CLK_TCON0_CH0]		= &tcon0_ch0_clk.common.hw,
+		[CLK_TCON1_CH0]		= &tcon1_ch0_clk.common.hw,
+		[CLK_CSI_SCLK]		= &csi_sclk_clk.common.hw,
+		[CLK_TVD]		= &tvd_sun4i_clk.common.hw,
+		[CLK_TCON0_CH1_SCLK2]	= &tcon0_ch1_sclk2_clk.common.hw,
+		[CLK_TCON0_CH1]		= &tcon0_ch1_clk.common.hw,
+		[CLK_TCON1_CH1_SCLK2]	= &tcon1_ch1_sclk2_clk.common.hw,
+		[CLK_TCON1_CH1]		= &tcon1_ch1_clk.common.hw,
+		[CLK_CSI0]		= &csi0_clk.common.hw,
+		[CLK_CSI1]		= &csi1_clk.common.hw,
+		[CLK_VE]		= &ve_clk.common.hw,
+		[CLK_CODEC]		= &codec_clk.common.hw,
+		[CLK_AVS]		= &avs_clk.common.hw,
+		[CLK_ACE]		= &ace_clk.common.hw,
+		[CLK_HDMI]		= &hdmi_clk.common.hw,
+		[CLK_GPU]		= &gpu_sun7i_clk.common.hw,
+		[CLK_MBUS]		= &mbus_sun4i_clk.common.hw,
+	},
+	.num	= CLK_NUMBER_SUN4I,
+};
+static struct clk_hw_onecell_data sun7i_a20_hw_clks = {
+	.hws	= {
+		[CLK_HOSC]		= &hosc_clk.common.hw,
+		[CLK_PLL_CORE]		= &pll_core_clk.common.hw,
+		[CLK_PLL_AUDIO_BASE]	= &pll_audio_base_clk.common.hw,
+		[CLK_PLL_AUDIO]		= &pll_audio_clk.hw,
+		[CLK_PLL_AUDIO_2X]	= &pll_audio_2x_clk.hw,
+		[CLK_PLL_AUDIO_4X]	= &pll_audio_4x_clk.hw,
+		[CLK_PLL_AUDIO_8X]	= &pll_audio_8x_clk.hw,
+		[CLK_PLL_VIDEO0]	= &pll_video0_clk.common.hw,
+		[CLK_PLL_VIDEO0_2X]	= &pll_video0_2x_clk.hw,
+		[CLK_PLL_VE]		= &pll_ve_sun7i_clk.common.hw,
+		[CLK_PLL_DDR_BASE]	= &pll_ddr_base_clk.common.hw,
+		[CLK_PLL_DDR]		= &pll_ddr_clk.common.hw,
+		[CLK_PLL_DDR_OTHER]	= &pll_ddr_other_clk.common.hw,
+		[CLK_PLL_PERIPH_BASE]	= &pll_periph_base_clk.common.hw,
+		[CLK_PLL_PERIPH]	= &pll_periph_clk.hw,
+		[CLK_PLL_PERIPH_SATA]	= &pll_periph_sata_clk.common.hw,
+		[CLK_PLL_VIDEO1]	= &pll_video1_clk.common.hw,
+		[CLK_PLL_VIDEO1_2X]	= &pll_video1_2x_clk.hw,
+		[CLK_PLL_GPU]		= &pll_gpu_clk.common.hw,
+		[CLK_CPU]		= &cpu_clk.common.hw,
+		[CLK_AXI]		= &axi_clk.common.hw,
+		[CLK_AHB]		= &ahb_sun7i_clk.common.hw,
+		[CLK_APB0]		= &apb0_clk.common.hw,
+		[CLK_APB1]		= &apb1_clk.common.hw,
+		[CLK_AHB_OTG]		= &ahb_otg_clk.common.hw,
+		[CLK_AHB_EHCI0]		= &ahb_ehci0_clk.common.hw,
+		[CLK_AHB_OHCI0]		= &ahb_ohci0_clk.common.hw,
+		[CLK_AHB_EHCI1]		= &ahb_ehci1_clk.common.hw,
+		[CLK_AHB_OHCI1]		= &ahb_ohci1_clk.common.hw,
+		[CLK_AHB_SS]		= &ahb_ss_clk.common.hw,
+		[CLK_AHB_DMA]		= &ahb_dma_clk.common.hw,
+		[CLK_AHB_BIST]		= &ahb_bist_clk.common.hw,
+		[CLK_AHB_MMC0]		= &ahb_mmc0_clk.common.hw,
+		[CLK_AHB_MMC1]		= &ahb_mmc1_clk.common.hw,
+		[CLK_AHB_MMC2]		= &ahb_mmc2_clk.common.hw,
+		[CLK_AHB_MMC3]		= &ahb_mmc3_clk.common.hw,
+		[CLK_AHB_MS]		= &ahb_ms_clk.common.hw,
+		[CLK_AHB_NAND]		= &ahb_nand_clk.common.hw,
+		[CLK_AHB_SDRAM]		= &ahb_sdram_clk.common.hw,
+		[CLK_AHB_ACE]		= &ahb_ace_clk.common.hw,
+		[CLK_AHB_EMAC]		= &ahb_emac_clk.common.hw,
+		[CLK_AHB_TS]		= &ahb_ts_clk.common.hw,
+		[CLK_AHB_SPI0]		= &ahb_spi0_clk.common.hw,
+		[CLK_AHB_SPI1]		= &ahb_spi1_clk.common.hw,
+		[CLK_AHB_SPI2]		= &ahb_spi2_clk.common.hw,
+		[CLK_AHB_SPI3]		= &ahb_spi3_clk.common.hw,
+		[CLK_AHB_PATA]		= &ahb_pata_clk.common.hw,
+		[CLK_AHB_SATA]		= &ahb_sata_clk.common.hw,
+		[CLK_AHB_HSTIMER]	= &ahb_hstimer_clk.common.hw,
+		[CLK_AHB_VE]		= &ahb_ve_clk.common.hw,
+		[CLK_AHB_TVD]		= &ahb_tvd_clk.common.hw,
+		[CLK_AHB_TVE0]		= &ahb_tve0_clk.common.hw,
+		[CLK_AHB_TVE1]		= &ahb_tve1_clk.common.hw,
+		[CLK_AHB_LCD0]		= &ahb_lcd0_clk.common.hw,
+		[CLK_AHB_LCD1]		= &ahb_lcd1_clk.common.hw,
+		[CLK_AHB_CSI0]		= &ahb_csi0_clk.common.hw,
+		[CLK_AHB_CSI1]		= &ahb_csi1_clk.common.hw,
+		[CLK_AHB_HDMI1]		= &ahb_hdmi1_clk.common.hw,
+		[CLK_AHB_HDMI0]		= &ahb_hdmi0_clk.common.hw,
+		[CLK_AHB_DE_BE0]	= &ahb_de_be0_clk.common.hw,
+		[CLK_AHB_DE_BE1]	= &ahb_de_be1_clk.common.hw,
+		[CLK_AHB_DE_FE0]	= &ahb_de_fe0_clk.common.hw,
+		[CLK_AHB_DE_FE1]	= &ahb_de_fe1_clk.common.hw,
+		[CLK_AHB_GMAC]		= &ahb_gmac_clk.common.hw,
+		[CLK_AHB_MP]		= &ahb_mp_clk.common.hw,
+		[CLK_AHB_GPU]		= &ahb_gpu_clk.common.hw,
+		[CLK_APB0_CODEC]	= &apb0_codec_clk.common.hw,
+		[CLK_APB0_SPDIF]	= &apb0_spdif_clk.common.hw,
+		[CLK_APB0_AC97]		= &apb0_ac97_clk.common.hw,
+		[CLK_APB0_I2S0]		= &apb0_i2s0_clk.common.hw,
+		[CLK_APB0_I2S1]		= &apb0_i2s1_clk.common.hw,
+		[CLK_APB0_PIO]		= &apb0_pio_clk.common.hw,
+		[CLK_APB0_IR0]		= &apb0_ir0_clk.common.hw,
+		[CLK_APB0_IR1]		= &apb0_ir1_clk.common.hw,
+		[CLK_APB0_I2S2]		= &apb0_i2s2_clk.common.hw,
+		[CLK_APB0_KEYPAD]	= &apb0_keypad_clk.common.hw,
+		[CLK_APB1_I2C0]		= &apb1_i2c0_clk.common.hw,
+		[CLK_APB1_I2C1]		= &apb1_i2c1_clk.common.hw,
+		[CLK_APB1_I2C2]		= &apb1_i2c2_clk.common.hw,
+		[CLK_APB1_I2C3]		= &apb1_i2c3_clk.common.hw,
+		[CLK_APB1_CAN]		= &apb1_can_clk.common.hw,
+		[CLK_APB1_SCR]		= &apb1_scr_clk.common.hw,
+		[CLK_APB1_PS20]		= &apb1_ps20_clk.common.hw,
+		[CLK_APB1_PS21]		= &apb1_ps21_clk.common.hw,
+		[CLK_APB1_I2C4]		= &apb1_i2c4_clk.common.hw,
+		[CLK_APB1_UART0]	= &apb1_uart0_clk.common.hw,
+		[CLK_APB1_UART1]	= &apb1_uart1_clk.common.hw,
+		[CLK_APB1_UART2]	= &apb1_uart2_clk.common.hw,
+		[CLK_APB1_UART3]	= &apb1_uart3_clk.common.hw,
+		[CLK_APB1_UART4]	= &apb1_uart4_clk.common.hw,
+		[CLK_APB1_UART5]	= &apb1_uart5_clk.common.hw,
+		[CLK_APB1_UART6]	= &apb1_uart6_clk.common.hw,
+		[CLK_APB1_UART7]	= &apb1_uart7_clk.common.hw,
+		[CLK_NAND]		= &nand_clk.common.hw,
+		[CLK_MS]		= &ms_clk.common.hw,
+		[CLK_MMC0]		= &mmc0_clk.common.hw,
+		[CLK_MMC0_OUTPUT]	= &mmc0_output_clk.common.hw,
+		[CLK_MMC0_SAMPLE]	= &mmc0_sample_clk.common.hw,
+		[CLK_MMC1]		= &mmc1_clk.common.hw,
+		[CLK_MMC1_OUTPUT]	= &mmc1_output_clk.common.hw,
+		[CLK_MMC1_SAMPLE]	= &mmc1_sample_clk.common.hw,
+		[CLK_MMC2]		= &mmc2_clk.common.hw,
+		[CLK_MMC2_OUTPUT]	= &mmc2_output_clk.common.hw,
+		[CLK_MMC2_SAMPLE]	= &mmc2_sample_clk.common.hw,
+		[CLK_MMC3]		= &mmc3_clk.common.hw,
+		[CLK_MMC3_OUTPUT]	= &mmc3_output_clk.common.hw,
+		[CLK_MMC3_SAMPLE]	= &mmc3_sample_clk.common.hw,
+		[CLK_TS]		= &ts_clk.common.hw,
+		[CLK_SS]		= &ss_clk.common.hw,
+		[CLK_SPI0]		= &spi0_clk.common.hw,
+		[CLK_SPI1]		= &spi1_clk.common.hw,
+		[CLK_SPI2]		= &spi2_clk.common.hw,
+		[CLK_PATA]		= &pata_clk.common.hw,
+		[CLK_IR0]		= &ir0_sun7i_clk.common.hw,
+		[CLK_IR1]		= &ir1_sun7i_clk.common.hw,
+		[CLK_I2S0]		= &i2s0_clk.common.hw,
+		[CLK_AC97]		= &ac97_clk.common.hw,
+		[CLK_SPDIF]		= &spdif_clk.common.hw,
+		[CLK_KEYPAD]		= &keypad_clk.common.hw,
+		[CLK_SATA]		= &sata_clk.common.hw,
+		[CLK_USB_OHCI0]		= &usb_ohci0_clk.common.hw,
+		[CLK_USB_OHCI1]		= &usb_ohci1_clk.common.hw,
+		[CLK_USB_PHY]		= &usb_phy_clk.common.hw,
+		/* CLK_GPS is unimplemented */
+		[CLK_SPI3]		= &spi3_clk.common.hw,
+		[CLK_I2S1]		= &i2s1_clk.common.hw,
+		[CLK_I2S2]		= &i2s2_clk.common.hw,
+		[CLK_DRAM_VE]		= &dram_ve_clk.common.hw,
+		[CLK_DRAM_CSI0]		= &dram_csi0_clk.common.hw,
+		[CLK_DRAM_CSI1]		= &dram_csi1_clk.common.hw,
+		[CLK_DRAM_TS]		= &dram_ts_clk.common.hw,
+		[CLK_DRAM_TVD]		= &dram_tvd_clk.common.hw,
+		[CLK_DRAM_TVE0]		= &dram_tve0_clk.common.hw,
+		[CLK_DRAM_TVE1]		= &dram_tve1_clk.common.hw,
+		[CLK_DRAM_OUT]		= &dram_out_clk.common.hw,
+		[CLK_DRAM_DE_FE1]	= &dram_de_fe1_clk.common.hw,
+		[CLK_DRAM_DE_FE0]	= &dram_de_fe0_clk.common.hw,
+		[CLK_DRAM_DE_BE0]	= &dram_de_be0_clk.common.hw,
+		[CLK_DRAM_DE_BE1]	= &dram_de_be1_clk.common.hw,
+		[CLK_DRAM_MP]		= &dram_mp_clk.common.hw,
+		[CLK_DRAM_ACE]		= &dram_ace_clk.common.hw,
+		[CLK_DE_BE0]		= &de_be0_clk.common.hw,
+		[CLK_DE_BE1]		= &de_be1_clk.common.hw,
+		[CLK_DE_FE0]		= &de_fe0_clk.common.hw,
+		[CLK_DE_FE1]		= &de_fe1_clk.common.hw,
+		[CLK_DE_MP]		= &de_mp_clk.common.hw,
+		[CLK_TCON0_CH0]		= &tcon0_ch0_clk.common.hw,
+		[CLK_TCON1_CH0]		= &tcon1_ch0_clk.common.hw,
+		[CLK_CSI_SCLK]		= &csi_sclk_clk.common.hw,
+		[CLK_TVD_SCLK2]		= &tvd_sclk2_sun7i_clk.common.hw,
+		[CLK_TVD]		= &tvd_sclk1_sun7i_clk.common.hw,
+		[CLK_TCON0_CH1_SCLK2]	= &tcon0_ch1_sclk2_clk.common.hw,
+		[CLK_TCON0_CH1]		= &tcon0_ch1_clk.common.hw,
+		[CLK_TCON1_CH1_SCLK2]	= &tcon1_ch1_sclk2_clk.common.hw,
+		[CLK_TCON1_CH1]		= &tcon1_ch1_clk.common.hw,
+		[CLK_CSI0]		= &csi0_clk.common.hw,
+		[CLK_CSI1]		= &csi1_clk.common.hw,
+		[CLK_VE]		= &ve_clk.common.hw,
+		[CLK_CODEC]		= &codec_clk.common.hw,
+		[CLK_AVS]		= &avs_clk.common.hw,
+		[CLK_ACE]		= &ace_clk.common.hw,
+		[CLK_HDMI]		= &hdmi_clk.common.hw,
+		[CLK_GPU]		= &gpu_sun7i_clk.common.hw,
+		[CLK_MBUS]		= &mbus_sun7i_clk.common.hw,
+		[CLK_HDMI1_SLOW]	= &hdmi1_slow_clk.common.hw,
+		[CLK_HDMI1]		= &hdmi1_clk.common.hw,
+		[CLK_OUT_A]		= &out_a_clk.common.hw,
+		[CLK_OUT_B]		= &out_b_clk.common.hw,
+	},
+	.num	= CLK_NUMBER_SUN7I,
+};
+
+static struct ccu_reset_map sunxi_a10_a20_ccu_resets[] = {
+	[RST_USB_PHY0]		= { 0x0cc, BIT(0) },
+	[RST_USB_PHY1]		= { 0x0cc, BIT(1) },
+	[RST_USB_PHY2]		= { 0x0cc, BIT(2) },
+	[RST_GPS]		= { 0x0d0, BIT(0) },
+	[RST_DE_BE0]		= { 0x104, BIT(30) },
+	[RST_DE_BE1]		= { 0x108, BIT(30) },
+	[RST_DE_FE0]		= { 0x10c, BIT(30) },
+	[RST_DE_FE1]		= { 0x110, BIT(30) },
+	[RST_DE_MP]		= { 0x114, BIT(30) },
+	[RST_TVE0]		= { 0x118, BIT(29) },
+	[RST_TCON0]		= { 0x118, BIT(30) },
+	[RST_TVE1]		= { 0x11c, BIT(29) },
+	[RST_TCON1]		= { 0x11c, BIT(30) },
+	[RST_CSI0]		= { 0x134, BIT(30) },
+	[RST_CSI1]		= { 0x138, BIT(30) },
+	[RST_VE]		= { 0x13c, BIT(0) },
+	[RST_ACE]		= { 0x148, BIT(16) },
+	[RST_LVDS]		= { 0x14c, BIT(0) },
+	[RST_GPU]		= { 0x154, BIT(30) },
+	[RST_HDMI_H]		= { 0x170, BIT(0) },
+	[RST_HDMI_SYS]		= { 0x170, BIT(1) },
+	[RST_HDMI_AUDIO_DMA]	= { 0x170, BIT(2) },
+};
+
+static const struct sunxi_ccu_desc sun4i_a10_ccu_desc = {
+	.ccu_clks	= sun4i_sun7i_ccu_clks,
+	.num_ccu_clks	= ARRAY_SIZE(sun4i_sun7i_ccu_clks),
+
+	.hw_clks	= &sun4i_a10_hw_clks,
+
+	.resets		= sunxi_a10_a20_ccu_resets,
+	.num_resets	= ARRAY_SIZE(sunxi_a10_a20_ccu_resets),
+};
+
+static const struct sunxi_ccu_desc sun7i_a20_ccu_desc = {
+	.ccu_clks	= sun4i_sun7i_ccu_clks,
+	.num_ccu_clks	= ARRAY_SIZE(sun4i_sun7i_ccu_clks),
+
+	.hw_clks	= &sun7i_a20_hw_clks,
+
+	.resets		= sunxi_a10_a20_ccu_resets,
+	.num_resets	= ARRAY_SIZE(sunxi_a10_a20_ccu_resets),
+};
+
+static void __init sun4i_ccu_init(struct device_node *node,
+				  const struct sunxi_ccu_desc *desc)
+{
+	void __iomem *reg;
+	u32 val;
+
+	reg = of_io_request_and_map(node, 0, of_node_full_name(node));
+	if (IS_ERR(reg)) {
+		pr_err("%s: Could not map the clock registers\n",
+		       of_node_full_name(node));
+		return;
+	}
+
+	/* Force the PLL-Audio-1x divider to 4 */
+	val = readl(reg + SUN4I_PLL_AUDIO_REG);
+	val &= ~GENMASK(29, 26);
+	writel(val | (4 << 26), reg + SUN4I_PLL_AUDIO_REG);
+
+	/*
+	 * Use the peripheral PLL6 as the AHB parent, instead of CPU /
+	 * AXI which have rate changes due to cpufreq.
+	 *
+	 * This is especially a big deal for the HS timer whose parent
+	 * clock is AHB.
+	 *
+	 * NB! These bits are undocumented in A10 manual.
+	 */
+	val = readl(reg + SUN4I_AHB_REG);
+	val &= ~GENMASK(7, 6);
+	writel(val | (2 << 6), reg + SUN4I_AHB_REG);
+
+	sunxi_ccu_probe(node, reg, desc);
+}
+
+static void __init sun4i_a10_ccu_setup(struct device_node *node)
+{
+	sun4i_ccu_init(node, &sun4i_a10_ccu_desc);
+}
+CLK_OF_DECLARE(sun4i_a10_ccu, "allwinner,sun4i-a10-ccu",
+	       sun4i_a10_ccu_setup);
+
+static void __init sun7i_a20_ccu_setup(struct device_node *node)
+{
+	sun4i_ccu_init(node, &sun7i_a20_ccu_desc);
+}
+CLK_OF_DECLARE(sun7i_a20_ccu, "allwinner,sun7i-a20-ccu",
+	       sun7i_a20_ccu_setup);
diff --git a/drivers/clk/sunxi-ng/ccu-sun4i-a10.h b/drivers/clk/sunxi-ng/ccu-sun4i-a10.h
new file mode 100644
index 000000000000..c5947c7c050e
--- /dev/null
+++ b/drivers/clk/sunxi-ng/ccu-sun4i-a10.h
@@ -0,0 +1,61 @@
+/*
+ * Copyright 2017 Priit Laes
+ *
+ * Priit Laes <plaes@plaes.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _CCU_SUN4I_A10_H_
+#define _CCU_SUN4I_A10_H_
+
+#include <dt-bindings/clock/sun4i-a10-ccu.h>
+#include <dt-bindings/clock/sun7i-a20-ccu.h>
+#include <dt-bindings/reset/sun4i-a10-ccu.h>
+
+/* The HOSC is exported */
+#define CLK_PLL_CORE		2
+#define CLK_PLL_AUDIO_BASE	3
+#define CLK_PLL_AUDIO		4
+#define CLK_PLL_AUDIO_2X	5
+#define CLK_PLL_AUDIO_4X	6
+#define CLK_PLL_AUDIO_8X	7
+#define CLK_PLL_VIDEO0		8
+#define CLK_PLL_VIDEO0_2X	9
+#define CLK_PLL_VE		10
+#define CLK_PLL_DDR_BASE	11
+#define CLK_PLL_DDR		12
+#define CLK_PLL_DDR_OTHER	13
+#define CLK_PLL_PERIPH_BASE	14
+#define CLK_PLL_PERIPH		15
+#define CLK_PLL_PERIPH_SATA	16
+#define CLK_PLL_VIDEO1		17
+#define CLK_PLL_VIDEO1_2X	18
+#define CLK_PLL_GPU		19
+
+/* The CPU clock is exported */
+#define CLK_AXI			21
+#define CLK_AXI_DRAM		22
+#define CLK_AHB			23
+#define CLK_APB0		24
+#define CLK_APB1		25
+
+/* AHB gates are exported (23..68) */
+/* APB0 gates are exported (69..78) */
+/* APB1 gates are exported (79..95) */
+/* IP module clocks are exported (96..128) */
+/* DRAM gates are exported (129..142)*/
+/* Media (display engine clocks & etc) are exported (143..169) */
+
+#define CLK_NUMBER_SUN4I	(CLK_MBUS + 1)
+#define CLK_NUMBER_SUN7I	(CLK_OUT_B + 1)
+
+#endif /* _CCU_SUN4I_A10_H_ */
diff --git a/include/dt-bindings/clock/sun4i-a10-ccu.h b/include/dt-bindings/clock/sun4i-a10-ccu.h
new file mode 100644
index 000000000000..c5a53f38d654
--- /dev/null
+++ b/include/dt-bindings/clock/sun4i-a10-ccu.h
@@ -0,0 +1,200 @@
+/*
+ * Copyright (C) 2017 Priit Laes <plaes@plaes.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#ifndef _DT_BINDINGS_CLK_SUN4I_A10_H_
+#define _DT_BINDINGS_CLK_SUN4I_A10_H_
+
+#define CLK_HOSC		1
+#define CLK_CPU			20
+
+/* AHB Gates */
+#define CLK_AHB_OTG		26
+#define CLK_AHB_EHCI0		27
+#define CLK_AHB_OHCI0		28
+#define CLK_AHB_EHCI1		29
+#define CLK_AHB_OHCI1		30
+#define CLK_AHB_SS		31
+#define CLK_AHB_DMA		32
+#define CLK_AHB_BIST		33
+#define CLK_AHB_MMC0		34
+#define CLK_AHB_MMC1		35
+#define CLK_AHB_MMC2		36
+#define CLK_AHB_MMC3		37
+#define CLK_AHB_MS		38
+#define CLK_AHB_NAND		39
+#define CLK_AHB_SDRAM		40
+#define CLK_AHB_ACE		41
+#define CLK_AHB_EMAC		42
+#define CLK_AHB_TS		43
+#define CLK_AHB_SPI0		44
+#define CLK_AHB_SPI1		45
+#define CLK_AHB_SPI2		46
+#define CLK_AHB_SPI3		47
+#define CLK_AHB_PATA		48
+#define CLK_AHB_SATA		49
+#define CLK_AHB_GPS		50
+#define CLK_AHB_HSTIMER		51
+#define CLK_AHB_VE		52
+#define CLK_AHB_TVD		53
+#define CLK_AHB_TVE0		54
+#define CLK_AHB_TVE1		55
+#define CLK_AHB_LCD0		56
+#define CLK_AHB_LCD1		57
+#define CLK_AHB_CSI0		58
+#define CLK_AHB_CSI1		59
+#define CLK_AHB_HDMI0		60
+#define CLK_AHB_HDMI1		61
+#define CLK_AHB_DE_BE0		62
+#define CLK_AHB_DE_BE1		63
+#define CLK_AHB_DE_FE0		64
+#define CLK_AHB_DE_FE1		65
+#define CLK_AHB_GMAC		66
+#define CLK_AHB_MP		67
+#define CLK_AHB_GPU		68
+
+/* APB0 Gates */
+#define CLK_APB0_CODEC		69
+#define CLK_APB0_SPDIF		70
+#define CLK_APB0_I2S0		71
+#define CLK_APB0_AC97		72
+#define CLK_APB0_I2S1		73
+#define CLK_APB0_PIO		74
+#define CLK_APB0_IR0		75
+#define CLK_APB0_IR1		76
+#define CLK_APB0_I2S2		77
+#define CLK_APB0_KEYPAD		78
+
+/* APB1 Gates */
+#define CLK_APB1_I2C0		79
+#define CLK_APB1_I2C1		80
+#define CLK_APB1_I2C2		81
+#define CLK_APB1_I2C3		82
+#define CLK_APB1_CAN		83
+#define CLK_APB1_SCR		84
+#define CLK_APB1_PS20		85
+#define CLK_APB1_PS21		86
+#define CLK_APB1_I2C4		87
+#define CLK_APB1_UART0		88
+#define CLK_APB1_UART1		89
+#define CLK_APB1_UART2		90
+#define CLK_APB1_UART3		91
+#define CLK_APB1_UART4		92
+#define CLK_APB1_UART5		93
+#define CLK_APB1_UART6		94
+#define CLK_APB1_UART7		95
+
+/* IP clocks */
+#define CLK_NAND		96
+#define CLK_MS			97
+#define CLK_MMC0		98
+#define CLK_MMC0_OUTPUT		99
+#define CLK_MMC0_SAMPLE		100
+#define CLK_MMC1		101
+#define CLK_MMC1_OUTPUT		102
+#define CLK_MMC1_SAMPLE		103
+#define CLK_MMC2		104
+#define CLK_MMC2_OUTPUT		105
+#define CLK_MMC2_SAMPLE		106
+#define CLK_MMC3		107
+#define CLK_MMC3_OUTPUT		108
+#define CLK_MMC3_SAMPLE		109
+#define CLK_TS			110
+#define CLK_SS			111
+#define CLK_SPI0		112
+#define CLK_SPI1		113
+#define CLK_SPI2		114
+#define CLK_PATA		115
+#define CLK_IR0			116
+#define CLK_IR1			117
+#define CLK_I2S0		118
+#define CLK_AC97		119
+#define CLK_SPDIF		120
+#define CLK_KEYPAD		121
+#define CLK_SATA		122
+#define CLK_USB_OHCI0		123
+#define CLK_USB_OHCI1		124
+#define CLK_USB_PHY		125
+#define CLK_GPS			126
+#define CLK_SPI3		127
+#define CLK_I2S1		128
+#define CLK_I2S2		129
+
+/* DRAM Gates */
+#define CLK_DRAM_VE		130
+#define CLK_DRAM_CSI0		131
+#define CLK_DRAM_CSI1		132
+#define CLK_DRAM_TS		133
+#define CLK_DRAM_TVD		134
+#define CLK_DRAM_TVE0		135
+#define CLK_DRAM_TVE1		136
+#define CLK_DRAM_OUT		137
+#define CLK_DRAM_DE_FE1		138
+#define CLK_DRAM_DE_FE0		139
+#define CLK_DRAM_DE_BE0		140
+#define CLK_DRAM_DE_BE1		141
+#define CLK_DRAM_MP		142
+#define CLK_DRAM_ACE		143
+
+/* Display Engine Clocks */
+#define CLK_DE_BE0		144
+#define CLK_DE_BE1		145
+#define CLK_DE_FE0		146
+#define CLK_DE_FE1		147
+#define CLK_DE_MP		148
+#define CLK_TCON0_CH0		149
+#define CLK_TCON1_CH0		150
+#define CLK_CSI_SCLK		151
+#define CLK_TVD_SCLK2		152
+#define CLK_TVD			153
+#define CLK_TCON0_CH1_SCLK2	154
+#define CLK_TCON0_CH1		155
+#define CLK_TCON1_CH1_SCLK2	156
+#define CLK_TCON1_CH1		157
+#define CLK_CSI0		158
+#define CLK_CSI1		159
+#define CLK_CODEC		160
+#define CLK_VE			161
+#define CLK_AVS			162
+#define CLK_ACE			163
+#define CLK_HDMI		164
+#define CLK_GPU			165
+
+#endif /* _DT_BINDINGS_CLK_SUN4I_A10_H_ */
diff --git a/include/dt-bindings/clock/sun7i-a20-ccu.h b/include/dt-bindings/clock/sun7i-a20-ccu.h
new file mode 100644
index 000000000000..045a5178da0c
--- /dev/null
+++ b/include/dt-bindings/clock/sun7i-a20-ccu.h
@@ -0,0 +1,53 @@
+/*
+ * Copyright (C) 2017 Priit Laes <plaes@plaes.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#ifndef _DT_BINDINGS_CLK_SUN7I_A20_H_
+#define _DT_BINDINGS_CLK_SUN7I_A20_H_
+
+#include <dt-bindings/clock/sun4i-a10-ccu.h>
+
+#define CLK_MBUS		166
+#define CLK_HDMI1_SLOW		167
+#define CLK_HDMI1		168
+#define CLK_OUT_A		169
+#define CLK_OUT_B		170
+
+#endif /* _DT_BINDINGS_CLK_SUN7I_A20_H_ */
diff --git a/include/dt-bindings/reset/sun4i-a10-ccu.h b/include/dt-bindings/reset/sun4i-a10-ccu.h
new file mode 100644
index 000000000000..5f4480bedc8a
--- /dev/null
+++ b/include/dt-bindings/reset/sun4i-a10-ccu.h
@@ -0,0 +1,69 @@
+/*
+ * Copyright (C) 2017 Priit Laes <plaes@plaes.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#ifndef _DT_BINDINGS_RST_SUN4I_A10_H
+#define _DT_BINDINGS_RST_SUN4I_A10_H
+
+#define	RST_USB_PHY0		1
+#define	RST_USB_PHY1		2
+#define	RST_USB_PHY2		3
+#define	RST_GPS			4
+#define	RST_DE_BE0		5
+#define	RST_DE_BE1		6
+#define	RST_DE_FE0		7
+#define	RST_DE_FE1		8
+#define	RST_DE_MP		9
+#define	RST_TVE0		10
+#define	RST_TCON0		11
+#define	RST_TVE1		12
+#define	RST_TCON1		13
+#define	RST_CSI0		14
+#define	RST_CSI1		15
+#define	RST_VE			16
+#define	RST_ACE			17
+#define	RST_LVDS		18
+#define	RST_GPU			19
+#define	RST_HDMI_H		20
+#define	RST_HDMI_SYS		21
+#define	RST_HDMI_AUDIO_DMA	22
+
+#endif /* DT_BINDINGS_RST_SUN4I_A10_H */
-- 
cgit v1.2.3


From df4f45a00b104463d147c60a45f353879f70fc8b Mon Sep 17 00:00:00 2001
From: Arvind Yadav <arvind.yadav.cs@gmail.com>
Date: Mon, 28 Aug 2017 12:32:39 +0530
Subject: clk: ux500: prcmu: constify clk_ops.

clk_ops are not supposed to change at runtime. All functions
working with clk_ops provided by <linux/clk-provider.h> work
with const clk_ops. So mark the non-const clk_ops as const.

Here, Function "clk_reg_prcmu" is used to initialized clk_init_data.
clk_init_data is working with const clk_ops. So make clk_reg_prcmu
non-const clk_ops argument as const.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
---
 drivers/clk/ux500/clk-prcmu.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/drivers/clk/ux500/clk-prcmu.c b/drivers/clk/ux500/clk-prcmu.c
index 7f343821f4e4..6e3e16b2e5ca 100644
--- a/drivers/clk/ux500/clk-prcmu.c
+++ b/drivers/clk/ux500/clk-prcmu.c
@@ -186,7 +186,7 @@ static void clk_prcmu_opp_volt_unprepare(struct clk_hw *hw)
 	clk->is_prepared = 0;
 }
 
-static struct clk_ops clk_prcmu_scalable_ops = {
+static const struct clk_ops clk_prcmu_scalable_ops = {
 	.prepare = clk_prcmu_prepare,
 	.unprepare = clk_prcmu_unprepare,
 	.is_prepared = clk_prcmu_is_prepared,
@@ -198,7 +198,7 @@ static struct clk_ops clk_prcmu_scalable_ops = {
 	.set_rate = clk_prcmu_set_rate,
 };
 
-static struct clk_ops clk_prcmu_gate_ops = {
+static const struct clk_ops clk_prcmu_gate_ops = {
 	.prepare = clk_prcmu_prepare,
 	.unprepare = clk_prcmu_unprepare,
 	.is_prepared = clk_prcmu_is_prepared,
@@ -208,19 +208,19 @@ static struct clk_ops clk_prcmu_gate_ops = {
 	.recalc_rate = clk_prcmu_recalc_rate,
 };
 
-static struct clk_ops clk_prcmu_scalable_rate_ops = {
+static const struct clk_ops clk_prcmu_scalable_rate_ops = {
 	.is_enabled = clk_prcmu_is_enabled,
 	.recalc_rate = clk_prcmu_recalc_rate,
 	.round_rate = clk_prcmu_round_rate,
 	.set_rate = clk_prcmu_set_rate,
 };
 
-static struct clk_ops clk_prcmu_rate_ops = {
+static const struct clk_ops clk_prcmu_rate_ops = {
 	.is_enabled = clk_prcmu_is_enabled,
 	.recalc_rate = clk_prcmu_recalc_rate,
 };
 
-static struct clk_ops clk_prcmu_opp_gate_ops = {
+static const struct clk_ops clk_prcmu_opp_gate_ops = {
 	.prepare = clk_prcmu_opp_prepare,
 	.unprepare = clk_prcmu_opp_unprepare,
 	.is_prepared = clk_prcmu_is_prepared,
@@ -230,7 +230,7 @@ static struct clk_ops clk_prcmu_opp_gate_ops = {
 	.recalc_rate = clk_prcmu_recalc_rate,
 };
 
-static struct clk_ops clk_prcmu_opp_volt_scalable_ops = {
+static const struct clk_ops clk_prcmu_opp_volt_scalable_ops = {
 	.prepare = clk_prcmu_opp_volt_prepare,
 	.unprepare = clk_prcmu_opp_volt_unprepare,
 	.is_prepared = clk_prcmu_is_prepared,
@@ -247,7 +247,7 @@ static struct clk *clk_reg_prcmu(const char *name,
 				 u8 cg_sel,
 				 unsigned long rate,
 				 unsigned long flags,
-				 struct clk_ops *clk_prcmu_ops)
+				 const struct clk_ops *clk_prcmu_ops)
 {
 	struct clk_prcmu *clk;
 	struct clk_init_data clk_prcmu_init;
-- 
cgit v1.2.3


From ca2ea4b0365324f449f83ce99d6c0a430bfe924c Mon Sep 17 00:00:00 2001
From: Arvind Yadav <arvind.yadav.cs@gmail.com>
Date: Mon, 28 Aug 2017 12:32:40 +0530
Subject: clk: ux500: sysctrl: constify clk_ops.

clk_ops are not supposed to change at runtime. All functions
working with clk_ops provided by <linux/clk-provider.h> work
with const clk_ops. So mark the non-const clk_ops as const.

Here, Function "clk_reg_sysctrl" is used to initialized clk_init_data.
clk_init_data is working with const clk_ops. So make clk_reg_sysctrl
non-const clk_ops argument as const.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
---
 drivers/clk/ux500/clk-sysctrl.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/clk/ux500/clk-sysctrl.c b/drivers/clk/ux500/clk-sysctrl.c
index 266ddea630d2..8a4e93ce1e42 100644
--- a/drivers/clk/ux500/clk-sysctrl.c
+++ b/drivers/clk/ux500/clk-sysctrl.c
@@ -98,18 +98,18 @@ static u8 clk_sysctrl_get_parent(struct clk_hw *hw)
 	return clk->parent_index;
 }
 
-static struct clk_ops clk_sysctrl_gate_ops = {
+static const struct clk_ops clk_sysctrl_gate_ops = {
 	.prepare = clk_sysctrl_prepare,
 	.unprepare = clk_sysctrl_unprepare,
 };
 
-static struct clk_ops clk_sysctrl_gate_fixed_rate_ops = {
+static const struct clk_ops clk_sysctrl_gate_fixed_rate_ops = {
 	.prepare = clk_sysctrl_prepare,
 	.unprepare = clk_sysctrl_unprepare,
 	.recalc_rate = clk_sysctrl_recalc_rate,
 };
 
-static struct clk_ops clk_sysctrl_set_parent_ops = {
+static const struct clk_ops clk_sysctrl_set_parent_ops = {
 	.set_parent = clk_sysctrl_set_parent,
 	.get_parent = clk_sysctrl_get_parent,
 };
@@ -124,7 +124,7 @@ static struct clk *clk_reg_sysctrl(struct device *dev,
 				unsigned long rate,
 				unsigned long enable_delay_us,
 				unsigned long flags,
-				struct clk_ops *clk_sysctrl_ops)
+				const struct clk_ops *clk_sysctrl_ops)
 {
 	struct clk_sysctrl *clk;
 	struct clk_init_data clk_sysctrl_init;
-- 
cgit v1.2.3


From 56d877764112af89aebb17e831c579827f006df0 Mon Sep 17 00:00:00 2001
From: Arvind Yadav <arvind.yadav.cs@gmail.com>
Date: Mon, 28 Aug 2017 12:32:41 +0530
Subject: clk: ux500: prcc: constify clk_ops.

clk_ops are not supposed to change at runtime. All functions
working with clk_ops provided by <linux/clk-provider.h> work
with const clk_ops. So mark the non-const clk_ops as const.

Here, Function "clk_reg_prcc" is used to initialized clk_init_data.
clk_init_data is working with const clk_ops. So make clk_reg_prcc
non-const clk_ops argument as const.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
---
 drivers/clk/ux500/clk-prcc.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/clk/ux500/clk-prcc.c b/drivers/clk/ux500/clk-prcc.c
index 0e950769ed03..f50592775c9d 100644
--- a/drivers/clk/ux500/clk-prcc.c
+++ b/drivers/clk/ux500/clk-prcc.c
@@ -79,13 +79,13 @@ static int clk_prcc_is_enabled(struct clk_hw *hw)
 	return clk->is_enabled;
 }
 
-static struct clk_ops clk_prcc_pclk_ops = {
+static const struct clk_ops clk_prcc_pclk_ops = {
 	.enable = clk_prcc_pclk_enable,
 	.disable = clk_prcc_pclk_disable,
 	.is_enabled = clk_prcc_is_enabled,
 };
 
-static struct clk_ops clk_prcc_kclk_ops = {
+static const struct clk_ops clk_prcc_kclk_ops = {
 	.enable = clk_prcc_kclk_enable,
 	.disable = clk_prcc_kclk_disable,
 	.is_enabled = clk_prcc_is_enabled,
@@ -96,7 +96,7 @@ static struct clk *clk_reg_prcc(const char *name,
 				resource_size_t phy_base,
 				u32 cg_sel,
 				unsigned long flags,
-				struct clk_ops *clk_prcc_ops)
+				const struct clk_ops *clk_prcc_ops)
 {
 	struct clk_prcc *clk;
 	struct clk_init_data clk_prcc_init;
-- 
cgit v1.2.3


From 2839b1efebe8a1ce68780331f3150beba82590eb Mon Sep 17 00:00:00 2001
From: Linus Walleij <linus.walleij@linaro.org>
Date: Tue, 8 Aug 2017 21:08:18 +0200
Subject: clk: gemini: hands off PCI OE bit

This bit is pin control, and needs to be carefully managed by the
new pin control driver.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
---
 drivers/clk/clk-gemini.c | 7 -------
 1 file changed, 7 deletions(-)

diff --git a/drivers/clk/clk-gemini.c b/drivers/clk/clk-gemini.c
index b4cf2f699a21..f940e5af845b 100644
--- a/drivers/clk/clk-gemini.c
+++ b/drivers/clk/clk-gemini.c
@@ -37,7 +37,6 @@ static DEFINE_SPINLOCK(gemini_clk_lock);
 
 #define GEMINI_GLOBAL_MISC_CONTROL	0x30
 #define PCI_CLK_66MHZ			BIT(18)
-#define PCI_CLK_OE			BIT(17)
 
 #define GEMINI_GLOBAL_CLOCK_CONTROL	0x34
 #define PCI_CLKRUN_EN			BIT(16)
@@ -159,9 +158,6 @@ static int gemini_pci_enable(struct clk_hw *hw)
 
 	regmap_update_bits(pciclk->map, GEMINI_GLOBAL_CLOCK_CONTROL,
 			   0, PCI_CLKRUN_EN);
-	regmap_update_bits(pciclk->map,
-			   GEMINI_GLOBAL_MISC_CONTROL,
-			   0, PCI_CLK_OE);
 	return 0;
 }
 
@@ -169,9 +165,6 @@ static void gemini_pci_disable(struct clk_hw *hw)
 {
 	struct clk_gemini_pci *pciclk = to_pciclk(hw);
 
-	regmap_update_bits(pciclk->map,
-			   GEMINI_GLOBAL_MISC_CONTROL,
-			   PCI_CLK_OE, 0);
 	regmap_update_bits(pciclk->map, GEMINI_GLOBAL_CLOCK_CONTROL,
 			   PCI_CLKRUN_EN, 0);
 }
-- 
cgit v1.2.3


From 9959989fc49d61f0c53524a3b95c55db7b7b9b3f Mon Sep 17 00:00:00 2001
From: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Date: Mon, 28 Aug 2017 18:57:23 +0900
Subject: clk: uniphier: add ethernet clock control support

Add clock control for ethernet controller on Pro4, PXs2, LD11 and LD20.

Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
---
 drivers/clk/uniphier/clk-uniphier-sys.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/drivers/clk/uniphier/clk-uniphier-sys.c b/drivers/clk/uniphier/clk-uniphier-sys.c
index 6fcf781de7d3..01da1414ec37 100644
--- a/drivers/clk/uniphier/clk-uniphier-sys.c
+++ b/drivers/clk/uniphier/clk-uniphier-sys.c
@@ -57,6 +57,12 @@
 #define UNIPHIER_PRO4_SYS_CLK_USB3(idx, ch)				\
 	UNIPHIER_CLK_GATE("usb3" #ch, (idx), NULL, 0x2104, 16 + (ch))
 
+#define UNIPHIER_PRO4_SYS_CLK_ETHER(idx)				\
+	UNIPHIER_CLK_GATE("ether", (idx), NULL, 0x2104, 12)
+
+#define UNIPHIER_LD11_SYS_CLK_ETHER(idx)				\
+	UNIPHIER_CLK_GATE("ether", (idx), NULL, 0x210c, 6)
+
 const struct uniphier_clk_data uniphier_ld4_sys_clk_data[] = {
 	UNIPHIER_CLK_FACTOR("spll", -1, "ref", 65, 1),		/* 1597.44 MHz */
 	UNIPHIER_CLK_FACTOR("upll", -1, "ref", 6000, 512),	/* 288 MHz */
@@ -81,6 +87,7 @@ const struct uniphier_clk_data uniphier_pro4_sys_clk_data[] = {
 	UNIPHIER_LD4_SYS_CLK_NAND(2),
 	UNIPHIER_LD4_SYS_CLK_SD,
 	UNIPHIER_CLK_FACTOR("usb2", -1, "upll", 1, 12),
+	UNIPHIER_PRO4_SYS_CLK_ETHER(6),
 	UNIPHIER_LD4_SYS_CLK_STDMAC(8),			/* HSC, MIO, RLE */
 	UNIPHIER_PRO4_SYS_CLK_GIO(12),			/* Ether, SATA, USB3 */
 	UNIPHIER_PRO4_SYS_CLK_USB3(14, 0),
@@ -122,6 +129,7 @@ const struct uniphier_clk_data uniphier_pxs2_sys_clk_data[] = {
 	UNIPHIER_CLK_FACTOR("i2c", 1, "spll", 1, 48),
 	UNIPHIER_PRO5_SYS_CLK_NAND(2),
 	UNIPHIER_PRO5_SYS_CLK_SD,
+	UNIPHIER_PRO4_SYS_CLK_ETHER(6),
 	UNIPHIER_LD4_SYS_CLK_STDMAC(8),				/* HSC, RLE */
 	/* GIO is always clock-enabled: no function for 0x2104 bit6 */
 	UNIPHIER_PRO4_SYS_CLK_USB3(14, 0),
@@ -142,6 +150,7 @@ const struct uniphier_clk_data uniphier_ld11_sys_clk_data[] = {
 	UNIPHIER_LD11_SYS_CLK_NAND(2),
 	UNIPHIER_LD11_SYS_CLK_EMMC(4),
 	/* Index 5 reserved for eMMC PHY */
+	UNIPHIER_LD11_SYS_CLK_ETHER(6),
 	UNIPHIER_LD11_SYS_CLK_STDMAC(8),			/* HSC, MIO */
 	UNIPHIER_CLK_FACTOR("usb2", -1, "ref", 24, 25),
 	/* CPU gears */
@@ -171,6 +180,7 @@ const struct uniphier_clk_data uniphier_ld20_sys_clk_data[] = {
 	UNIPHIER_LD11_SYS_CLK_EMMC(4),
 	/* Index 5 reserved for eMMC PHY */
 	UNIPHIER_LD20_SYS_CLK_SD,
+	UNIPHIER_LD11_SYS_CLK_ETHER(6),
 	UNIPHIER_LD11_SYS_CLK_STDMAC(8),			/* HSC */
 	/* GIO is always clock-enabled: no function for 0x210c bit5 */
 	/*
-- 
cgit v1.2.3


From fdda6ee947cd4faf8d0d5bc4d9888f896358355d Mon Sep 17 00:00:00 2001
From: Arvind Yadav <arvind.yadav.cs@gmail.com>
Date: Mon, 28 Aug 2017 10:58:52 +0530
Subject: clk: imx: constify clk_div_table

clk_div_table are not supposed to change at runtime. All functions
working with clk_div_table provided by <linux/clk-provider.h> work
with const clk_div_table. So mark the non-const structs as const.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
---
 drivers/clk/imx/clk-imx6sl.c | 6 +++---
 drivers/clk/imx/clk-imx6sx.c | 6 +++---
 drivers/clk/imx/clk-imx6ul.c | 6 +++---
 drivers/clk/imx/clk-imx7d.c  | 4 ++--
 drivers/clk/imx/clk-vf610.c  | 2 +-
 5 files changed, 12 insertions(+), 12 deletions(-)

diff --git a/drivers/clk/imx/clk-imx6sl.c b/drivers/clk/imx/clk-imx6sl.c
index 5fd4ddac1bf1..9642cdf0fb88 100644
--- a/drivers/clk/imx/clk-imx6sl.c
+++ b/drivers/clk/imx/clk-imx6sl.c
@@ -71,7 +71,7 @@ static const char *pll5_bypass_sels[]	= { "pll5", "pll5_bypass_src", };
 static const char *pll6_bypass_sels[]	= { "pll6", "pll6_bypass_src", };
 static const char *pll7_bypass_sels[]	= { "pll7", "pll7_bypass_src", };
 
-static struct clk_div_table clk_enet_ref_table[] = {
+static const struct clk_div_table clk_enet_ref_table[] = {
 	{ .val = 0, .div = 20, },
 	{ .val = 1, .div = 10, },
 	{ .val = 2, .div = 5, },
@@ -79,14 +79,14 @@ static struct clk_div_table clk_enet_ref_table[] = {
 	{ }
 };
 
-static struct clk_div_table post_div_table[] = {
+static const struct clk_div_table post_div_table[] = {
 	{ .val = 2, .div = 1, },
 	{ .val = 1, .div = 2, },
 	{ .val = 0, .div = 4, },
 	{ }
 };
 
-static struct clk_div_table video_div_table[] = {
+static const struct clk_div_table video_div_table[] = {
 	{ .val = 0, .div = 1, },
 	{ .val = 1, .div = 2, },
 	{ .val = 2, .div = 1, },
diff --git a/drivers/clk/imx/clk-imx6sx.c b/drivers/clk/imx/clk-imx6sx.c
index b5c96de41ccf..e6d389e333d7 100644
--- a/drivers/clk/imx/clk-imx6sx.c
+++ b/drivers/clk/imx/clk-imx6sx.c
@@ -105,7 +105,7 @@ static int const clks_init_on[] __initconst = {
 	IMX6SX_CLK_EPIT2,
 };
 
-static struct clk_div_table clk_enet_ref_table[] = {
+static const struct clk_div_table clk_enet_ref_table[] = {
 	{ .val = 0, .div = 20, },
 	{ .val = 1, .div = 10, },
 	{ .val = 2, .div = 5, },
@@ -113,14 +113,14 @@ static struct clk_div_table clk_enet_ref_table[] = {
 	{ }
 };
 
-static struct clk_div_table post_div_table[] = {
+static const struct clk_div_table post_div_table[] = {
 	{ .val = 2, .div = 1, },
 	{ .val = 1, .div = 2, },
 	{ .val = 0, .div = 4, },
 	{ }
 };
 
-static struct clk_div_table video_div_table[] = {
+static const struct clk_div_table video_div_table[] = {
 	{ .val = 0, .div = 1, },
 	{ .val = 1, .div = 2, },
 	{ .val = 2, .div = 1, },
diff --git a/drivers/clk/imx/clk-imx6ul.c b/drivers/clk/imx/clk-imx6ul.c
index b4e0dff3c8c2..5e8c18afce9a 100644
--- a/drivers/clk/imx/clk-imx6ul.c
+++ b/drivers/clk/imx/clk-imx6ul.c
@@ -78,7 +78,7 @@ static int const clks_init_on[] __initconst = {
 	IMX6UL_CLK_MMDC_P0_FAST, IMX6UL_CLK_MMDC_P0_IPG,
 };
 
-static struct clk_div_table clk_enet_ref_table[] = {
+static const struct clk_div_table clk_enet_ref_table[] = {
 	{ .val = 0, .div = 20, },
 	{ .val = 1, .div = 10, },
 	{ .val = 2, .div = 5, },
@@ -86,14 +86,14 @@ static struct clk_div_table clk_enet_ref_table[] = {
 	{ }
 };
 
-static struct clk_div_table post_div_table[] = {
+static const struct clk_div_table post_div_table[] = {
 	{ .val = 2, .div = 1, },
 	{ .val = 1, .div = 2, },
 	{ .val = 0, .div = 4, },
 	{ }
 };
 
-static struct clk_div_table video_div_table[] = {
+static const struct clk_div_table video_div_table[] = {
 	{ .val = 0, .div = 1, },
 	{ .val = 1, .div = 2, },
 	{ .val = 2, .div = 1, },
diff --git a/drivers/clk/imx/clk-imx7d.c b/drivers/clk/imx/clk-imx7d.c
index 3da121826b1b..2305699db467 100644
--- a/drivers/clk/imx/clk-imx7d.c
+++ b/drivers/clk/imx/clk-imx7d.c
@@ -27,7 +27,7 @@ static u32 share_count_sai2;
 static u32 share_count_sai3;
 static u32 share_count_nand;
 
-static struct clk_div_table test_div_table[] = {
+static const struct clk_div_table test_div_table[] = {
 	{ .val = 3, .div = 1, },
 	{ .val = 2, .div = 1, },
 	{ .val = 1, .div = 2, },
@@ -35,7 +35,7 @@ static struct clk_div_table test_div_table[] = {
 	{ }
 };
 
-static struct clk_div_table post_div_table[] = {
+static const struct clk_div_table post_div_table[] = {
 	{ .val = 3, .div = 4, },
 	{ .val = 2, .div = 1, },
 	{ .val = 1, .div = 2, },
diff --git a/drivers/clk/imx/clk-vf610.c b/drivers/clk/imx/clk-vf610.c
index 59b1863deb88..6dae54325a91 100644
--- a/drivers/clk/imx/clk-vf610.c
+++ b/drivers/clk/imx/clk-vf610.c
@@ -102,7 +102,7 @@ static const char *ftm_ext_sels[]	= {"sirc_128k", "sxosc", "fxosc_half", "audio_
 static const char *ftm_fix_sels[]	= { "sxosc", "ipg_bus", };
 
 
-static struct clk_div_table pll4_audio_div_table[] = {
+static const struct clk_div_table pll4_audio_div_table[] = {
 	{ .val = 0, .div = 1 },
 	{ .val = 1, .div = 2 },
 	{ .val = 2, .div = 6 },
-- 
cgit v1.2.3


From 59273246b2df45feaea05e1069914f8ec2120c8c Mon Sep 17 00:00:00 2001
From: Arvind Yadav <arvind.yadav.cs@gmail.com>
Date: Mon, 28 Aug 2017 10:58:53 +0530
Subject: clk: zte: constify clk_div_table

clk_div_table are not supposed to change at runtime. All functions
working with clk_div_table provided by <linux/clk-provider.h> work
with const clk_div_table. So mark the non-const structs as const.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
---
 drivers/clk/zte/clk-zx296718.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/clk/zte/clk-zx296718.c b/drivers/clk/zte/clk-zx296718.c
index 27f853d4c76b..354dd508c516 100644
--- a/drivers/clk/zte/clk-zx296718.c
+++ b/drivers/clk/zte/clk-zx296718.c
@@ -451,7 +451,7 @@ static struct zx_clk_fixed_factor top_ffactor_clk[] = {
 	FFACTOR(0, "emmc_mux_div2",	"emmc_mux", 1, 2, CLK_SET_RATE_PARENT),
 };
 
-static struct clk_div_table noc_div_table[] = {
+static const struct clk_div_table noc_div_table[] = {
 	{ .val = 1, .div = 2, },
 	{ .val = 3, .div = 4, },
 };
@@ -644,7 +644,7 @@ static int __init top_clocks_init(struct device_node *np)
 	return 0;
 }
 
-static struct clk_div_table common_even_div_table[] = {
+static const struct clk_div_table common_even_div_table[] = {
 	{ .val = 0, .div = 1, },
 	{ .val = 1, .div = 2, },
 	{ .val = 3, .div = 4, },
@@ -656,7 +656,7 @@ static struct clk_div_table common_even_div_table[] = {
 	{ .val = 15, .div = 16, },
 };
 
-static struct clk_div_table common_div_table[] = {
+static const struct clk_div_table common_div_table[] = {
 	{ .val = 0, .div = 1, },
 	{ .val = 1, .div = 2, },
 	{ .val = 2, .div = 3, },
-- 
cgit v1.2.3


From daeeb438c052e3763617c636943e07a8f3684e9e Mon Sep 17 00:00:00 2001
From: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Date: Fri, 25 Aug 2017 20:39:14 +0300
Subject: ARC: clk: introduce HSDK pll driver

HSDK board manages its clocks using various PLLs. These PLL have same
dividers and corresponding control registers mapped to different addresses.
So we add one common driver for such PLLs.

Each PLL on HSDK board consists of three dividers: IDIV, FBDIV and
ODIV. Output clock value is managed using these dividers.

We add pre-defined tables with supported rate values and appropriate
configurations of IDIV, FBDIV and ODIV for each value.

As of today we add support for PLLs that generate clock for the
HSDK arc cpus, system, ddr, AXI tunnel and hdmi.

By this patch we add support for several plls (arc cpus pll and others),
so we had to use two different init types: CLK_OF_DECLARE for arc cpus pll
and regular probing for others plls.

Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Reviewed-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
---
 .../bindings/clock/snps,hsdk-pll-clock.txt         |  28 ++
 MAINTAINERS                                        |   6 +
 drivers/clk/Kconfig                                |   7 +
 drivers/clk/Makefile                               |   1 +
 drivers/clk/clk-hsdk-pll.c                         | 431 +++++++++++++++++++++
 5 files changed, 473 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/clock/snps,hsdk-pll-clock.txt
 create mode 100644 drivers/clk/clk-hsdk-pll.c

diff --git a/Documentation/devicetree/bindings/clock/snps,hsdk-pll-clock.txt b/Documentation/devicetree/bindings/clock/snps,hsdk-pll-clock.txt
new file mode 100644
index 000000000000..c56c7553c730
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/snps,hsdk-pll-clock.txt
@@ -0,0 +1,28 @@
+Binding for the HSDK Generic PLL clock
+
+This binding uses the common clock binding[1].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible: should be "snps,hsdk-<name>-pll-clock"
+  "snps,hsdk-core-pll-clock"
+  "snps,hsdk-gp-pll-clock"
+  "snps,hsdk-hdmi-pll-clock"
+- reg : should contain base register location and length.
+- clocks: shall be the input parent clock phandle for the PLL.
+- #clock-cells: from common clock binding; Should always be set to 0.
+
+Example:
+	input_clk: input-clk {
+		clock-frequency = <33333333>;
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+	};
+
+	cpu_clk: cpu-clk@0 {
+		compatible = "snps,hsdk-core-pll-clock";
+		reg = <0x00 0x10>;
+		#clock-cells = <0>;
+		clocks = <&input_clk>;
+	};
diff --git a/MAINTAINERS b/MAINTAINERS
index c571fcf62740..cf704c7df2f0 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -12738,6 +12738,12 @@ F:	drivers/clocksource/arc_timer.c
 F:	drivers/tty/serial/arc_uart.c
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc.git
 
+SYNOPSYS ARC HSDK SDP pll clock driver
+M:	Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
+S:	Supported
+F:	drivers/clk/clk-hsdk-pll.c
+F:	Documentation/devicetree/bindings/clock/snps,hsdk-pll-clock.txt
+
 SYNOPSYS ARC SDP platform support
 M:	Alexey Brodkin <abrodkin@synopsys.com>
 S:	Supported
diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
index a874b72612d0..fdc99082a343 100644
--- a/drivers/clk/Kconfig
+++ b/drivers/clk/Kconfig
@@ -31,6 +31,13 @@ config COMMON_CLK_WM831X
 
 source "drivers/clk/versatile/Kconfig"
 
+config CLK_HSDK
+	bool "PLL Driver for HSDK platform"
+	depends on OF || COMPILE_TEST
+	---help---
+	  This driver supports the HSDK core, system, ddr, tunnel and hdmi PLLs
+	  control.
+
 config COMMON_CLK_MAX77686
 	tristate "Clock driver for Maxim 77620/77686/77802 MFD"
 	depends on MFD_MAX77686 || MFD_MAX77620 || COMPILE_TEST
diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index cd376b3fb47a..72e7c0eef32f 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -27,6 +27,7 @@ obj-$(CONFIG_COMMON_CLK_CS2000_CP)	+= clk-cs2000-cp.o
 obj-$(CONFIG_ARCH_EFM32)		+= clk-efm32gg.o
 obj-$(CONFIG_COMMON_CLK_GEMINI)		+= clk-gemini.o
 obj-$(CONFIG_ARCH_HIGHBANK)		+= clk-highbank.o
+obj-$(CONFIG_CLK_HSDK)			+= clk-hsdk-pll.o
 obj-$(CONFIG_COMMON_CLK_MAX77686)	+= clk-max77686.o
 obj-$(CONFIG_ARCH_MB86S7X)		+= clk-mb86s7x.o
 obj-$(CONFIG_ARCH_MOXART)		+= clk-moxart.o
diff --git a/drivers/clk/clk-hsdk-pll.c b/drivers/clk/clk-hsdk-pll.c
new file mode 100644
index 000000000000..bbf237173b37
--- /dev/null
+++ b/drivers/clk/clk-hsdk-pll.c
@@ -0,0 +1,431 @@
+/*
+ * Synopsys HSDK SDP Generic PLL clock driver
+ *
+ * Copyright (C) 2017 Synopsys
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#define CGU_PLL_CTRL	0x000 /* ARC PLL control register */
+#define CGU_PLL_STATUS	0x004 /* ARC PLL status register */
+#define CGU_PLL_FMEAS	0x008 /* ARC PLL frequency measurement register */
+#define CGU_PLL_MON	0x00C /* ARC PLL monitor register */
+
+#define CGU_PLL_CTRL_ODIV_SHIFT		2
+#define CGU_PLL_CTRL_IDIV_SHIFT		4
+#define CGU_PLL_CTRL_FBDIV_SHIFT	9
+#define CGU_PLL_CTRL_BAND_SHIFT		20
+
+#define CGU_PLL_CTRL_ODIV_MASK		GENMASK(3, CGU_PLL_CTRL_ODIV_SHIFT)
+#define CGU_PLL_CTRL_IDIV_MASK		GENMASK(8, CGU_PLL_CTRL_IDIV_SHIFT)
+#define CGU_PLL_CTRL_FBDIV_MASK		GENMASK(15, CGU_PLL_CTRL_FBDIV_SHIFT)
+
+#define CGU_PLL_CTRL_PD			BIT(0)
+#define CGU_PLL_CTRL_BYPASS		BIT(1)
+
+#define CGU_PLL_STATUS_LOCK		BIT(0)
+#define CGU_PLL_STATUS_ERR		BIT(1)
+
+#define HSDK_PLL_MAX_LOCK_TIME		100 /* 100 us */
+
+#define CGU_PLL_SOURCE_MAX		1
+
+#define CORE_IF_CLK_THRESHOLD_HZ	500000000
+#define CREG_CORE_IF_CLK_DIV_1		0x0
+#define CREG_CORE_IF_CLK_DIV_2		0x1
+
+struct hsdk_pll_cfg {
+	u32 rate;
+	u32 idiv;
+	u32 fbdiv;
+	u32 odiv;
+	u32 band;
+};
+
+static const struct hsdk_pll_cfg asdt_pll_cfg[] = {
+	{ 100000000,  0, 11, 3, 0 },
+	{ 133000000,  0, 15, 3, 0 },
+	{ 200000000,  1, 47, 3, 0 },
+	{ 233000000,  1, 27, 2, 0 },
+	{ 300000000,  1, 35, 2, 0 },
+	{ 333000000,  1, 39, 2, 0 },
+	{ 400000000,  1, 47, 2, 0 },
+	{ 500000000,  0, 14, 1, 0 },
+	{ 600000000,  0, 17, 1, 0 },
+	{ 700000000,  0, 20, 1, 0 },
+	{ 800000000,  0, 23, 1, 0 },
+	{ 900000000,  1, 26, 0, 0 },
+	{ 1000000000, 1, 29, 0, 0 },
+	{ 1100000000, 1, 32, 0, 0 },
+	{ 1200000000, 1, 35, 0, 0 },
+	{ 1300000000, 1, 38, 0, 0 },
+	{ 1400000000, 1, 41, 0, 0 },
+	{ 1500000000, 1, 44, 0, 0 },
+	{ 1600000000, 1, 47, 0, 0 },
+	{}
+};
+
+static const struct hsdk_pll_cfg hdmi_pll_cfg[] = {
+	{ 297000000,  0, 21, 2, 0 },
+	{ 540000000,  0, 19, 1, 0 },
+	{ 594000000,  0, 21, 1, 0 },
+	{}
+};
+
+struct hsdk_pll_clk {
+	struct clk_hw hw;
+	void __iomem *regs;
+	void __iomem *spec_regs;
+	const struct hsdk_pll_devdata *pll_devdata;
+	struct device *dev;
+};
+
+struct hsdk_pll_devdata {
+	const struct hsdk_pll_cfg *pll_cfg;
+	int (*update_rate)(struct hsdk_pll_clk *clk, unsigned long rate,
+			   const struct hsdk_pll_cfg *cfg);
+};
+
+static int hsdk_pll_core_update_rate(struct hsdk_pll_clk *, unsigned long,
+				     const struct hsdk_pll_cfg *);
+static int hsdk_pll_comm_update_rate(struct hsdk_pll_clk *, unsigned long,
+				     const struct hsdk_pll_cfg *);
+
+static const struct hsdk_pll_devdata core_pll_devdata = {
+	.pll_cfg = asdt_pll_cfg,
+	.update_rate = hsdk_pll_core_update_rate,
+};
+
+static const struct hsdk_pll_devdata sdt_pll_devdata = {
+	.pll_cfg = asdt_pll_cfg,
+	.update_rate = hsdk_pll_comm_update_rate,
+};
+
+static const struct hsdk_pll_devdata hdmi_pll_devdata = {
+	.pll_cfg = hdmi_pll_cfg,
+	.update_rate = hsdk_pll_comm_update_rate,
+};
+
+static inline void hsdk_pll_write(struct hsdk_pll_clk *clk, u32 reg, u32 val)
+{
+	iowrite32(val, clk->regs + reg);
+}
+
+static inline u32 hsdk_pll_read(struct hsdk_pll_clk *clk, u32 reg)
+{
+	return ioread32(clk->regs + reg);
+}
+
+static inline void hsdk_pll_set_cfg(struct hsdk_pll_clk *clk,
+				    const struct hsdk_pll_cfg *cfg)
+{
+	u32 val = 0;
+
+	/* Powerdown and Bypass bits should be cleared */
+	val |= cfg->idiv << CGU_PLL_CTRL_IDIV_SHIFT;
+	val |= cfg->fbdiv << CGU_PLL_CTRL_FBDIV_SHIFT;
+	val |= cfg->odiv << CGU_PLL_CTRL_ODIV_SHIFT;
+	val |= cfg->band << CGU_PLL_CTRL_BAND_SHIFT;
+
+	dev_dbg(clk->dev, "write configurarion: %#x\n", val);
+
+	hsdk_pll_write(clk, CGU_PLL_CTRL, val);
+}
+
+static inline bool hsdk_pll_is_locked(struct hsdk_pll_clk *clk)
+{
+	return !!(hsdk_pll_read(clk, CGU_PLL_STATUS) & CGU_PLL_STATUS_LOCK);
+}
+
+static inline bool hsdk_pll_is_err(struct hsdk_pll_clk *clk)
+{
+	return !!(hsdk_pll_read(clk, CGU_PLL_STATUS) & CGU_PLL_STATUS_ERR);
+}
+
+static inline struct hsdk_pll_clk *to_hsdk_pll_clk(struct clk_hw *hw)
+{
+	return container_of(hw, struct hsdk_pll_clk, hw);
+}
+
+static unsigned long hsdk_pll_recalc_rate(struct clk_hw *hw,
+					  unsigned long parent_rate)
+{
+	u32 val;
+	u64 rate;
+	u32 idiv, fbdiv, odiv;
+	struct hsdk_pll_clk *clk = to_hsdk_pll_clk(hw);
+
+	val = hsdk_pll_read(clk, CGU_PLL_CTRL);
+
+	dev_dbg(clk->dev, "current configurarion: %#x\n", val);
+
+	/* Check if PLL is disabled */
+	if (val & CGU_PLL_CTRL_PD)
+		return 0;
+
+	/* Check if PLL is bypassed */
+	if (val & CGU_PLL_CTRL_BYPASS)
+		return parent_rate;
+
+	/* input divider = reg.idiv + 1 */
+	idiv = 1 + ((val & CGU_PLL_CTRL_IDIV_MASK) >> CGU_PLL_CTRL_IDIV_SHIFT);
+	/* fb divider = 2*(reg.fbdiv + 1) */
+	fbdiv = 2 * (1 + ((val & CGU_PLL_CTRL_FBDIV_MASK) >> CGU_PLL_CTRL_FBDIV_SHIFT));
+	/* output divider = 2^(reg.odiv) */
+	odiv = 1 << ((val & CGU_PLL_CTRL_ODIV_MASK) >> CGU_PLL_CTRL_ODIV_SHIFT);
+
+	rate = (u64)parent_rate * fbdiv;
+	do_div(rate, idiv * odiv);
+
+	return rate;
+}
+
+static long hsdk_pll_round_rate(struct clk_hw *hw, unsigned long rate,
+				unsigned long *prate)
+{
+	int i;
+	unsigned long best_rate;
+	struct hsdk_pll_clk *clk = to_hsdk_pll_clk(hw);
+	const struct hsdk_pll_cfg *pll_cfg = clk->pll_devdata->pll_cfg;
+
+	if (pll_cfg[0].rate == 0)
+		return -EINVAL;
+
+	best_rate = pll_cfg[0].rate;
+
+	for (i = 1; pll_cfg[i].rate != 0; i++) {
+		if (abs(rate - pll_cfg[i].rate) < abs(rate - best_rate))
+			best_rate = pll_cfg[i].rate;
+	}
+
+	dev_dbg(clk->dev, "chosen best rate: %lu\n", best_rate);
+
+	return best_rate;
+}
+
+static int hsdk_pll_comm_update_rate(struct hsdk_pll_clk *clk,
+				     unsigned long rate,
+				     const struct hsdk_pll_cfg *cfg)
+{
+	hsdk_pll_set_cfg(clk, cfg);
+
+	/*
+	 * Wait until CGU relocks and check error status.
+	 * If after timeout CGU is unlocked yet return error.
+	 */
+	udelay(HSDK_PLL_MAX_LOCK_TIME);
+	if (!hsdk_pll_is_locked(clk))
+		return -ETIMEDOUT;
+
+	if (hsdk_pll_is_err(clk))
+		return -EINVAL;
+
+	return 0;
+}
+
+static int hsdk_pll_core_update_rate(struct hsdk_pll_clk *clk,
+				     unsigned long rate,
+				     const struct hsdk_pll_cfg *cfg)
+{
+	/*
+	 * When core clock exceeds 500MHz, the divider for the interface
+	 * clock must be programmed to div-by-2.
+	 */
+	if (rate > CORE_IF_CLK_THRESHOLD_HZ)
+		iowrite32(CREG_CORE_IF_CLK_DIV_2, clk->spec_regs);
+
+	hsdk_pll_set_cfg(clk, cfg);
+
+	/*
+	 * Wait until CGU relocks and check error status.
+	 * If after timeout CGU is unlocked yet return error.
+	 */
+	udelay(HSDK_PLL_MAX_LOCK_TIME);
+	if (!hsdk_pll_is_locked(clk))
+		return -ETIMEDOUT;
+
+	if (hsdk_pll_is_err(clk))
+		return -EINVAL;
+
+	/*
+	 * Program divider to div-by-1 if we succesfuly set core clock below
+	 * 500MHz threshold.
+	 */
+	if (rate <= CORE_IF_CLK_THRESHOLD_HZ)
+		iowrite32(CREG_CORE_IF_CLK_DIV_1, clk->spec_regs);
+
+	return 0;
+}
+
+static int hsdk_pll_set_rate(struct clk_hw *hw, unsigned long rate,
+			     unsigned long parent_rate)
+{
+	int i;
+	struct hsdk_pll_clk *clk = to_hsdk_pll_clk(hw);
+	const struct hsdk_pll_cfg *pll_cfg = clk->pll_devdata->pll_cfg;
+
+	for (i = 0; pll_cfg[i].rate != 0; i++) {
+		if (pll_cfg[i].rate == rate) {
+			return clk->pll_devdata->update_rate(clk, rate,
+							     &pll_cfg[i]);
+		}
+	}
+
+	dev_err(clk->dev, "invalid rate=%ld, parent_rate=%ld\n", rate,
+			parent_rate);
+
+	return -EINVAL;
+}
+
+static const struct clk_ops hsdk_pll_ops = {
+	.recalc_rate = hsdk_pll_recalc_rate,
+	.round_rate = hsdk_pll_round_rate,
+	.set_rate = hsdk_pll_set_rate,
+};
+
+static int hsdk_pll_clk_probe(struct platform_device *pdev)
+{
+	int ret;
+	struct resource *mem;
+	const char *parent_name;
+	unsigned int num_parents;
+	struct hsdk_pll_clk *pll_clk;
+	struct clk_init_data init = { };
+	struct device *dev = &pdev->dev;
+
+	pll_clk = devm_kzalloc(dev, sizeof(*pll_clk), GFP_KERNEL);
+	if (!pll_clk)
+		return -ENOMEM;
+
+	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	pll_clk->regs = devm_ioremap_resource(dev, mem);
+	if (IS_ERR(pll_clk->regs))
+		return PTR_ERR(pll_clk->regs);
+
+	init.name = dev->of_node->name;
+	init.ops = &hsdk_pll_ops;
+	parent_name = of_clk_get_parent_name(dev->of_node, 0);
+	init.parent_names = &parent_name;
+	num_parents = of_clk_get_parent_count(dev->of_node);
+	if (num_parents == 0 || num_parents > CGU_PLL_SOURCE_MAX) {
+		dev_err(dev, "wrong clock parents number: %u\n", num_parents);
+		return -EINVAL;
+	}
+	init.num_parents = num_parents;
+
+	pll_clk->hw.init = &init;
+	pll_clk->dev = dev;
+	pll_clk->pll_devdata = of_device_get_match_data(dev);
+
+	if (!pll_clk->pll_devdata) {
+		dev_err(dev, "No OF match data provided\n");
+		return -EINVAL;
+	}
+
+	ret = devm_clk_hw_register(dev, &pll_clk->hw);
+	if (ret) {
+		dev_err(dev, "failed to register %s clock\n", init.name);
+		return ret;
+	}
+
+	return of_clk_add_hw_provider(dev->of_node, of_clk_hw_simple_get,
+			&pll_clk->hw);
+}
+
+static int hsdk_pll_clk_remove(struct platform_device *pdev)
+{
+	of_clk_del_provider(pdev->dev.of_node);
+	return 0;
+}
+
+static void __init of_hsdk_pll_clk_setup(struct device_node *node)
+{
+	int ret;
+	const char *parent_name;
+	unsigned int num_parents;
+	struct hsdk_pll_clk *pll_clk;
+	struct clk_init_data init = { };
+
+	pll_clk = kzalloc(sizeof(*pll_clk), GFP_KERNEL);
+	if (!pll_clk)
+		return;
+
+	pll_clk->regs = of_iomap(node, 0);
+	if (!pll_clk->regs) {
+		pr_err("failed to map pll registers\n");
+		goto err_free_pll_clk;
+	}
+
+	pll_clk->spec_regs = of_iomap(node, 1);
+	if (!pll_clk->spec_regs) {
+		pr_err("failed to map pll registers\n");
+		goto err_unmap_comm_regs;
+	}
+
+	init.name = node->name;
+	init.ops = &hsdk_pll_ops;
+	parent_name = of_clk_get_parent_name(node, 0);
+	init.parent_names = &parent_name;
+	num_parents = of_clk_get_parent_count(node);
+	if (num_parents > CGU_PLL_SOURCE_MAX) {
+		pr_err("too much clock parents: %u\n", num_parents);
+		goto err_unmap_spec_regs;
+	}
+	init.num_parents = num_parents;
+
+	pll_clk->hw.init = &init;
+	pll_clk->pll_devdata = &core_pll_devdata;
+
+	ret = clk_hw_register(NULL, &pll_clk->hw);
+	if (ret) {
+		pr_err("failed to register %s clock\n", node->name);
+		goto err_unmap_spec_regs;
+	}
+
+	ret = of_clk_add_hw_provider(node, of_clk_hw_simple_get, &pll_clk->hw);
+	if (ret) {
+		pr_err("failed to add hw provider for %s clock\n", node->name);
+		goto err_unmap_spec_regs;
+	}
+
+	return;
+
+err_unmap_spec_regs:
+	iounmap(pll_clk->spec_regs);
+err_unmap_comm_regs:
+	iounmap(pll_clk->regs);
+err_free_pll_clk:
+	kfree(pll_clk);
+}
+
+/* Core PLL needed early for ARC cpus timers */
+CLK_OF_DECLARE(hsdk_pll_clock, "snps,hsdk-core-pll-clock",
+of_hsdk_pll_clk_setup);
+
+static const struct of_device_id hsdk_pll_clk_id[] = {
+	{ .compatible = "snps,hsdk-gp-pll-clock", .data = &sdt_pll_devdata},
+	{ .compatible = "snps,hsdk-hdmi-pll-clock", .data = &hdmi_pll_devdata},
+	{ }
+};
+
+static struct platform_driver hsdk_pll_clk_driver = {
+	.driver = {
+		.name = "hsdk-gp-pll-clock",
+		.of_match_table = hsdk_pll_clk_id,
+	},
+	.probe = hsdk_pll_clk_probe,
+	.remove = hsdk_pll_clk_remove,
+};
+builtin_platform_driver(hsdk_pll_clk_driver);
-- 
cgit v1.2.3


From 2c606871f3d8e3cfd4a079081a7cd9aabdbba99a Mon Sep 17 00:00:00 2001
From: Bhumika Goyal <bhumirks@gmail.com>
Date: Tue, 22 Aug 2017 19:36:26 +0530
Subject: clk: versatile: make clk_ops const

Make this const as it is only stored in the const field of a
clk_init_data structure.

Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Acked-by: Liviu Dudau <Liviu.Dudau@arm.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
---
 drivers/clk/versatile/clk-vexpress-osc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/clk/versatile/clk-vexpress-osc.c b/drivers/clk/versatile/clk-vexpress-osc.c
index 7e5add7d7752..e7a868b83fe5 100644
--- a/drivers/clk/versatile/clk-vexpress-osc.c
+++ b/drivers/clk/versatile/clk-vexpress-osc.c
@@ -61,7 +61,7 @@ static int vexpress_osc_set_rate(struct clk_hw *hw, unsigned long rate,
 	return regmap_write(osc->reg, 0, rate);
 }
 
-static struct clk_ops vexpress_osc_ops = {
+static const struct clk_ops vexpress_osc_ops = {
 	.recalc_rate = vexpress_osc_recalc_rate,
 	.round_rate = vexpress_osc_round_rate,
 	.set_rate = vexpress_osc_set_rate,
-- 
cgit v1.2.3


From 4e903450bcb9a6bc90733b981d7cb8b3c4996a0e Mon Sep 17 00:00:00 2001
From: Arnd Bergmann <arnd@arndb.de>
Date: Wed, 23 Aug 2017 16:39:27 +0200
Subject: clk: sunxi: fix uninitialized access

gcc-8 reports an uninitialized variable access in a code path
that we would see with incorrect DTB input:

drivers/clk/sunxi/clk-sun8i-bus-gates.c: In function 'sun8i_h3_bus_gates_init':
drivers/clk/sunxi/clk-sun8i-bus-gates.c:85:27: error: 'clk_parent' may be used uninitialized in this function [-Werror=maybe-uninitialized]

This works around by skipping invalid input and printing a warning
instead if it ever happens. The problem was apparently part of the
initiali driver submission, but older compilers don't notice it.

Fixes: ab6e23a4e388 ("clk: sunxi: Add H3 clocks support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
---
 drivers/clk/sunxi/clk-sun8i-bus-gates.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/clk/sunxi/clk-sun8i-bus-gates.c b/drivers/clk/sunxi/clk-sun8i-bus-gates.c
index 63fdb790df29..bee305bdddbe 100644
--- a/drivers/clk/sunxi/clk-sun8i-bus-gates.c
+++ b/drivers/clk/sunxi/clk-sun8i-bus-gates.c
@@ -78,6 +78,10 @@ static void __init sun8i_h3_bus_gates_init(struct device_node *node)
 			clk_parent = APB1;
 		else if (index >= 96 && index <= 127)
 			clk_parent = APB2;
+		else {
+			WARN_ON(true);
+			continue;
+		}
 
 		clk_reg = reg + 4 * (index / 32);
 		clk_bit = index % 32;
-- 
cgit v1.2.3


From fa0abb18d981099071ad382375d1d9e625d81f36 Mon Sep 17 00:00:00 2001
From: Lucas Stach <l.stach@pengutronix.de>
Date: Fri, 18 Aug 2017 18:30:58 +0200
Subject: clk: imx51: propagate rate across ipu_di*_sel

This propagates rate requests from the display interface to the divider
or PLL output, allowing to hit the required display rate in many more
cases.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Tested-By: Wladimir J. van der Laan <laanwj@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
---
 drivers/clk/imx/clk-imx51-imx53.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/clk/imx/clk-imx51-imx53.c b/drivers/clk/imx/clk-imx51-imx53.c
index 1e3c9ea5f9dc..7bcaf270db11 100644
--- a/drivers/clk/imx/clk-imx51-imx53.c
+++ b/drivers/clk/imx/clk-imx51-imx53.c
@@ -416,10 +416,10 @@ static void __init mx51_clocks_init(struct device_node *np)
 
 	clk[IMX5_CLK_LP_APM]		= imx_clk_mux("lp_apm", MXC_CCM_CCSR, 9, 1,
 						lp_apm_sel, ARRAY_SIZE(lp_apm_sel));
-	clk[IMX5_CLK_IPU_DI0_SEL]	= imx_clk_mux("ipu_di0_sel", MXC_CCM_CSCMR2, 26, 3,
-						mx51_ipu_di0_sel, ARRAY_SIZE(mx51_ipu_di0_sel));
-	clk[IMX5_CLK_IPU_DI1_SEL]	= imx_clk_mux("ipu_di1_sel", MXC_CCM_CSCMR2, 29, 3,
-						mx51_ipu_di1_sel, ARRAY_SIZE(mx51_ipu_di1_sel));
+	clk[IMX5_CLK_IPU_DI0_SEL]	= imx_clk_mux_flags("ipu_di0_sel", MXC_CCM_CSCMR2, 26, 3,
+						mx51_ipu_di0_sel, ARRAY_SIZE(mx51_ipu_di0_sel), CLK_SET_RATE_PARENT);
+	clk[IMX5_CLK_IPU_DI1_SEL]	= imx_clk_mux_flags("ipu_di1_sel", MXC_CCM_CSCMR2, 29, 3,
+						mx51_ipu_di1_sel, ARRAY_SIZE(mx51_ipu_di1_sel), CLK_SET_RATE_PARENT);
 	clk[IMX5_CLK_TVE_EXT_SEL]	= imx_clk_mux_flags("tve_ext_sel", MXC_CCM_CSCMR1, 6, 1,
 						mx51_tve_ext_sel, ARRAY_SIZE(mx51_tve_ext_sel), CLK_SET_RATE_PARENT);
 	clk[IMX5_CLK_TVE_SEL]		= imx_clk_mux("tve_sel", MXC_CCM_CSCMR1, 7, 1,
-- 
cgit v1.2.3


From e001525c4bcca9d3476f3ae30ff03e9ff67703d0 Mon Sep 17 00:00:00 2001
From: Gaku Inami <gaku.inami.xw@bp.renesas.com>
Date: Thu, 20 Apr 2017 02:46:31 +0900
Subject: clk: cs2000: Add cs2000_set_saved_rate

This patch adds the common function to reset the clk rate in order to
be able to use it in other cases.

Signed-off-by: Gaku Inami <gaku.inami.xw@bp.renesas.com>
Signed-off-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
---
 drivers/clk/clk-cs2000-cp.c | 14 ++++++++++----
 1 file changed, 10 insertions(+), 4 deletions(-)

diff --git a/drivers/clk/clk-cs2000-cp.c b/drivers/clk/clk-cs2000-cp.c
index c54baede4d68..e8ea81c30f0c 100644
--- a/drivers/clk/clk-cs2000-cp.c
+++ b/drivers/clk/clk-cs2000-cp.c
@@ -343,6 +343,15 @@ static int cs2000_set_rate(struct clk_hw *hw,
 	return __cs2000_set_rate(priv, ch, rate, parent_rate);
 }
 
+static int cs2000_set_saved_rate(struct cs2000_priv *priv)
+{
+	int ch = 0; /* it uses ch0 only at this point */
+
+	return __cs2000_set_rate(priv, ch,
+				 priv->saved_rate,
+				 priv->saved_parent_rate);
+}
+
 static int cs2000_enable(struct clk_hw *hw)
 {
 	struct cs2000_priv *priv = hw_to_priv(hw);
@@ -535,11 +544,8 @@ probe_err:
 static int cs2000_resume(struct device *dev)
 {
 	struct cs2000_priv *priv = dev_get_drvdata(dev);
-	int ch = 0; /* it uses ch0 only at this point */
 
-	return __cs2000_set_rate(priv, ch,
-				 priv->saved_rate,
-				 priv->saved_parent_rate);
+	return cs2000_set_saved_rate(priv);
 }
 
 static const struct dev_pm_ops cs2000_pm_ops = {
-- 
cgit v1.2.3


From 65bc9d7ff2d7c93a09dd6d6632d6170058fc0d34 Mon Sep 17 00:00:00 2001
From: Elaine Zhang <zhangqing@rock-chips.com>
Date: Wed, 16 Aug 2017 10:00:03 +0800
Subject: clk: Kconfig: Name RK805 in Kconfig for COMMON_CLK_RK808

The RK808 and RK805 PMICs are using a similar register map.
We can reuse the clk driver for the RK805 PMIC. So let's add
the RK805 in the Kconfig description.

Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Signed-off-by: Joseph Chen <chenjh@rock-chips.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
---
 drivers/clk/Kconfig | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
index fdc99082a343..1c4e1aa6767e 100644
--- a/drivers/clk/Kconfig
+++ b/drivers/clk/Kconfig
@@ -46,10 +46,10 @@ config COMMON_CLK_MAX77686
 	  clock.
 
 config COMMON_CLK_RK808
-	tristate "Clock driver for RK808/RK818"
+	tristate "Clock driver for RK805/RK808/RK818"
 	depends on MFD_RK808
 	---help---
-	  This driver supports RK808 and RK818 crystal oscillator clock. These
+	  This driver supports RK805, RK808 and RK818 crystal oscillator clock. These
 	  multi-function devices have two fixed-rate oscillators,
 	  clocked at 32KHz each. Clkout1 is always on, Clkout2 can off
 	  by control register.
-- 
cgit v1.2.3


From 9fa7231b1979f792b2cbc395c52e197158494948 Mon Sep 17 00:00:00 2001
From: Leo Yan <leo.yan@linaro.org>
Date: Tue, 29 Aug 2017 15:58:37 +0800
Subject: clk: hi6220: change watchdog clock source

The old code uses tcxo (19.2MHz) as watchdog clock but actually the
watchdog uses 32K clock, as result the watchdog timeout cannot be set
correctly and delay long time to reset SoC.

So this patch is to use 'ref32k' as clock source for watchdog.

Fixes: 72ea48610d43 ("clk: hi6220: Clock driver support for Hisilicon hi6220 SoC")
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
---
 drivers/clk/hisilicon/clk-hi6220.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/clk/hisilicon/clk-hi6220.c b/drivers/clk/hisilicon/clk-hi6220.c
index 4181b6808545..e786d717f75d 100644
--- a/drivers/clk/hisilicon/clk-hi6220.c
+++ b/drivers/clk/hisilicon/clk-hi6220.c
@@ -55,9 +55,9 @@ static struct hisi_fixed_factor_clock hi6220_fixed_factor_clks[] __initdata = {
 };
 
 static struct hisi_gate_clock hi6220_separated_gate_clks_ao[] __initdata = {
-	{ HI6220_WDT0_PCLK,   "wdt0_pclk",   "clk_tcxo", CLK_SET_RATE_PARENT|CLK_IGNORE_UNUSED, 0x630, 12, 0, },
-	{ HI6220_WDT1_PCLK,   "wdt1_pclk",   "clk_tcxo", CLK_SET_RATE_PARENT|CLK_IGNORE_UNUSED, 0x630, 13, 0, },
-	{ HI6220_WDT2_PCLK,   "wdt2_pclk",   "clk_tcxo", CLK_SET_RATE_PARENT|CLK_IGNORE_UNUSED, 0x630, 14, 0, },
+	{ HI6220_WDT0_PCLK,   "wdt0_pclk",   "ref32k",   CLK_SET_RATE_PARENT|CLK_IGNORE_UNUSED, 0x630, 12, 0, },
+	{ HI6220_WDT1_PCLK,   "wdt1_pclk",   "ref32k",   CLK_SET_RATE_PARENT|CLK_IGNORE_UNUSED, 0x630, 13, 0, },
+	{ HI6220_WDT2_PCLK,   "wdt2_pclk",   "ref32k",   CLK_SET_RATE_PARENT|CLK_IGNORE_UNUSED, 0x630, 14, 0, },
 	{ HI6220_TIMER0_PCLK, "timer0_pclk", "clk_tcxo", CLK_SET_RATE_PARENT|CLK_IGNORE_UNUSED, 0x630, 15, 0, },
 	{ HI6220_TIMER1_PCLK, "timer1_pclk", "clk_tcxo", CLK_SET_RATE_PARENT|CLK_IGNORE_UNUSED, 0x630, 16, 0, },
 	{ HI6220_TIMER2_PCLK, "timer2_pclk", "clk_tcxo", CLK_SET_RATE_PARENT|CLK_IGNORE_UNUSED, 0x630, 17, 0, },
-- 
cgit v1.2.3


From 736de651a83640c3a7597926625e48c882df8efa Mon Sep 17 00:00:00 2001
From: Masahiro Yamada <yamada.masahiro@socionext.com>
Date: Thu, 31 Aug 2017 21:03:36 +0900
Subject: clk: uniphier: add PXs3 clock data

Add basic clock data for Socionext's new SoC PXs3.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
---
 .../devicetree/bindings/clock/uniphier-clock.txt   |  3 +++
 drivers/clk/uniphier/clk-uniphier-core.c           | 12 +++++++++
 drivers/clk/uniphier/clk-uniphier-sys.c            | 30 ++++++++++++++++++++++
 drivers/clk/uniphier/clk-uniphier.h                |  1 +
 4 files changed, 46 insertions(+)

diff --git a/Documentation/devicetree/bindings/clock/uniphier-clock.txt b/Documentation/devicetree/bindings/clock/uniphier-clock.txt
index 2aec32d888ac..7b5f602765fe 100644
--- a/Documentation/devicetree/bindings/clock/uniphier-clock.txt
+++ b/Documentation/devicetree/bindings/clock/uniphier-clock.txt
@@ -13,6 +13,7 @@ Required properties:
     "socionext,uniphier-pxs2-clock" - for PXs2/LD6b SoC.
     "socionext,uniphier-ld11-clock" - for LD11 SoC.
     "socionext,uniphier-ld20-clock" - for LD20 SoC.
+    "socionext,uniphier-pxs3-clock" - for PXs3 SoC
 - #clock-cells: should be 1.
 
 Example:
@@ -54,6 +55,7 @@ Required properties:
     "socionext,uniphier-pxs2-sd-clock"  - for PXs2/LD6b SoC.
     "socionext,uniphier-ld11-mio-clock" - for LD11 SoC.
     "socionext,uniphier-ld20-sd-clock"  - for LD20 SoC.
+    "socionext,uniphier-pxs3-sd-clock"  - for PXs3 SoC
 - #clock-cells: should be 1.
 
 Example:
@@ -97,6 +99,7 @@ Required properties:
     "socionext,uniphier-pxs2-peri-clock" - for PXs2/LD6b SoC.
     "socionext,uniphier-ld11-peri-clock" - for LD11 SoC.
     "socionext,uniphier-ld20-peri-clock" - for LD20 SoC.
+    "socionext,uniphier-pxs3-peri-clock" - for PXs3 SoC
 - #clock-cells: should be 1.
 
 Example:
diff --git a/drivers/clk/uniphier/clk-uniphier-core.c b/drivers/clk/uniphier/clk-uniphier-core.c
index cb6ae261bb36..e09f3dd46318 100644
--- a/drivers/clk/uniphier/clk-uniphier-core.c
+++ b/drivers/clk/uniphier/clk-uniphier-core.c
@@ -138,6 +138,10 @@ static const struct of_device_id uniphier_clk_match[] = {
 		.compatible = "socionext,uniphier-ld20-clock",
 		.data = uniphier_ld20_sys_clk_data,
 	},
+	{
+		.compatible = "socionext,uniphier-pxs3-clock",
+		.data = uniphier_pxs3_sys_clk_data,
+	},
 	/* Media I/O clock, SD clock */
 	{
 		.compatible = "socionext,uniphier-ld4-mio-clock",
@@ -167,6 +171,10 @@ static const struct of_device_id uniphier_clk_match[] = {
 		.compatible = "socionext,uniphier-ld20-sd-clock",
 		.data = uniphier_pro5_sd_clk_data,
 	},
+	{
+		.compatible = "socionext,uniphier-pxs3-sd-clock",
+		.data = uniphier_pro5_sd_clk_data,
+	},
 	/* Peripheral clock */
 	{
 		.compatible = "socionext,uniphier-ld4-peri-clock",
@@ -196,6 +204,10 @@ static const struct of_device_id uniphier_clk_match[] = {
 		.compatible = "socionext,uniphier-ld20-peri-clock",
 		.data = uniphier_pro4_peri_clk_data,
 	},
+	{
+		.compatible = "socionext,uniphier-pxs3-peri-clock",
+		.data = uniphier_pro4_peri_clk_data,
+	},
 	{ /* sentinel */ }
 };
 
diff --git a/drivers/clk/uniphier/clk-uniphier-sys.c b/drivers/clk/uniphier/clk-uniphier-sys.c
index 01da1414ec37..44225702bb1f 100644
--- a/drivers/clk/uniphier/clk-uniphier-sys.c
+++ b/drivers/clk/uniphier/clk-uniphier-sys.c
@@ -205,3 +205,33 @@ const struct uniphier_clk_data uniphier_ld20_sys_clk_data[] = {
 			     "spll/4", "spll/8", "s2pll/4", "s2pll/8"),
 	{ /* sentinel */ }
 };
+
+const struct uniphier_clk_data uniphier_pxs3_sys_clk_data[] = {
+	UNIPHIER_CLK_FACTOR("cpll", -1, "ref", 104, 1),		/* ARM: 2600 MHz */
+	UNIPHIER_CLK_FACTOR("spll", -1, "ref", 80, 1),		/* 2000 MHz */
+	UNIPHIER_CLK_FACTOR("s2pll", -1, "ref", 88, 1),		/* IPP: 2400 MHz */
+	UNIPHIER_CLK_FACTOR("uart", 0, "spll", 1, 34),
+	UNIPHIER_CLK_FACTOR("i2c", 1, "spll", 1, 40),
+	UNIPHIER_LD20_SYS_CLK_SD,
+	UNIPHIER_LD11_SYS_CLK_NAND(2),
+	UNIPHIER_LD11_SYS_CLK_EMMC(4),
+	UNIPHIER_CLK_GATE("usb30", 12, NULL, 0x2104, 4),	/* =GIO0 */
+	UNIPHIER_CLK_GATE("usb31-0", 13, NULL, 0x2104, 5),	/* =GIO1 */
+	UNIPHIER_CLK_GATE("usb31-1", 14, NULL, 0x2104, 6),	/* =GIO1-1 */
+	UNIPHIER_CLK_GATE("usb30-phy0", 16, NULL, 0x210c, 16),
+	UNIPHIER_CLK_GATE("usb30-phy1", 17, NULL, 0x210c, 18),
+	UNIPHIER_CLK_GATE("usb30-phy2", 18, NULL, 0x210c, 20),
+	UNIPHIER_CLK_GATE("usb31-phy0", 20, NULL, 0x210c, 17),
+	UNIPHIER_CLK_GATE("usb31-phy1", 21, NULL, 0x210c, 19),
+	/* CPU gears */
+	UNIPHIER_CLK_DIV4("cpll", 2, 3, 4, 8),
+	UNIPHIER_CLK_DIV4("spll", 2, 3, 4, 8),
+	UNIPHIER_CLK_DIV4("s2pll", 2, 3, 4, 8),
+	UNIPHIER_CLK_CPUGEAR("cpu-ca53", 33, 0x8080, 0xf, 8,
+			     "cpll/2", "spll/2", "cpll/3", "spll/3",
+			     "spll/4", "spll/8", "cpll/4", "cpll/8"),
+	UNIPHIER_CLK_CPUGEAR("cpu-ipp", 34, 0x8100, 0xf, 8,
+			     "s2pll/2", "spll/2", "s2pll/3", "spll/3",
+			     "spll/4", "spll/8", "s2pll/4", "s2pll/8"),
+	{ /* sentinel */ }
+};
diff --git a/drivers/clk/uniphier/clk-uniphier.h b/drivers/clk/uniphier/clk-uniphier.h
index 827164093172..d10a009ada96 100644
--- a/drivers/clk/uniphier/clk-uniphier.h
+++ b/drivers/clk/uniphier/clk-uniphier.h
@@ -154,6 +154,7 @@ extern const struct uniphier_clk_data uniphier_pro5_sys_clk_data[];
 extern const struct uniphier_clk_data uniphier_pxs2_sys_clk_data[];
 extern const struct uniphier_clk_data uniphier_ld11_sys_clk_data[];
 extern const struct uniphier_clk_data uniphier_ld20_sys_clk_data[];
+extern const struct uniphier_clk_data uniphier_pxs3_sys_clk_data[];
 extern const struct uniphier_clk_data uniphier_ld4_mio_clk_data[];
 extern const struct uniphier_clk_data uniphier_pro5_sd_clk_data[];
 extern const struct uniphier_clk_data uniphier_ld4_peri_clk_data[];
-- 
cgit v1.2.3


From 42d3c5f634de895cf01f066a1ea67140d653c36e Mon Sep 17 00:00:00 2001
From: Gabriel Fernandez <gabriel.fernandez@st.com>
Date: Mon, 21 Aug 2017 13:59:00 +0200
Subject: clk: nxp: clk-lpc32xx: rename clk_gate_is_enabled()

We need to export clk_gate_is_enabled() from clk framework, then
to avoid compilation issue we have to rename clk_gate_is_enabled()
in NXP LPC32xx clock driver.
We changed all gate op with 'lpc32xx_' prefix:
lpc32xx_clk_gate_enable(),
lpc32xx_clk_gate_disable(),
lpc32xx_clk_gate_is_enabled().

Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
Acked-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
---
 drivers/clk/nxp/clk-lpc32xx.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/clk/nxp/clk-lpc32xx.c b/drivers/clk/nxp/clk-lpc32xx.c
index 5b98ff9076f3..7b359afd620e 100644
--- a/drivers/clk/nxp/clk-lpc32xx.c
+++ b/drivers/clk/nxp/clk-lpc32xx.c
@@ -885,7 +885,7 @@ static const struct clk_ops clk_usb_i2c_ops = {
 	.recalc_rate = clk_usb_i2c_recalc_rate,
 };
 
-static int clk_gate_enable(struct clk_hw *hw)
+static int lpc32xx_clk_gate_enable(struct clk_hw *hw)
 {
 	struct lpc32xx_clk_gate *clk = to_lpc32xx_gate(hw);
 	u32 mask = BIT(clk->bit_idx);
@@ -894,7 +894,7 @@ static int clk_gate_enable(struct clk_hw *hw)
 	return regmap_update_bits(clk_regmap, clk->reg, mask, val);
 }
 
-static void clk_gate_disable(struct clk_hw *hw)
+static void lpc32xx_clk_gate_disable(struct clk_hw *hw)
 {
 	struct lpc32xx_clk_gate *clk = to_lpc32xx_gate(hw);
 	u32 mask = BIT(clk->bit_idx);
@@ -903,7 +903,7 @@ static void clk_gate_disable(struct clk_hw *hw)
 	regmap_update_bits(clk_regmap, clk->reg, mask, val);
 }
 
-static int clk_gate_is_enabled(struct clk_hw *hw)
+static int lpc32xx_clk_gate_is_enabled(struct clk_hw *hw)
 {
 	struct lpc32xx_clk_gate *clk = to_lpc32xx_gate(hw);
 	u32 val;
@@ -916,9 +916,9 @@ static int clk_gate_is_enabled(struct clk_hw *hw)
 }
 
 static const struct clk_ops lpc32xx_clk_gate_ops = {
-	.enable = clk_gate_enable,
-	.disable = clk_gate_disable,
-	.is_enabled = clk_gate_is_enabled,
+	.enable = lpc32xx_clk_gate_enable,
+	.disable = lpc32xx_clk_gate_disable,
+	.is_enabled = lpc32xx_clk_gate_is_enabled,
 };
 
 #define div_mask(width)	((1 << (width)) - 1)
-- 
cgit v1.2.3


From 0a9c869d5c568054a828a38357f30d77659e5b1e Mon Sep 17 00:00:00 2001
From: Gabriel Fernandez <gabriel.fernandez@st.com>
Date: Mon, 21 Aug 2017 13:59:01 +0200
Subject: clk: gate: expose clk_gate_ops::is_enabled

This patch exposes clk_gate_ops::is_enabled as functions
that can be directly called and assigned in places like this so
we don't need wrapper functions that do nothing besides forward
the call.

Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
Suggested-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
---
 drivers/clk/clk-gate.c       | 3 ++-
 include/linux/clk-provider.h | 1 +
 2 files changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/clk/clk-gate.c b/drivers/clk/clk-gate.c
index 4e0c054a787c..dd82485e09a1 100644
--- a/drivers/clk/clk-gate.c
+++ b/drivers/clk/clk-gate.c
@@ -86,7 +86,7 @@ static void clk_gate_disable(struct clk_hw *hw)
 	clk_gate_endisable(hw, 0);
 }
 
-static int clk_gate_is_enabled(struct clk_hw *hw)
+int clk_gate_is_enabled(struct clk_hw *hw)
 {
 	u32 reg;
 	struct clk_gate *gate = to_clk_gate(hw);
@@ -101,6 +101,7 @@ static int clk_gate_is_enabled(struct clk_hw *hw)
 
 	return reg ? 1 : 0;
 }
+EXPORT_SYMBOL_GPL(clk_gate_is_enabled);
 
 const struct clk_ops clk_gate_ops = {
 	.enable = clk_gate_enable,
diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h
index 1fc113fbf955..5100ec1b5d55 100644
--- a/include/linux/clk-provider.h
+++ b/include/linux/clk-provider.h
@@ -343,6 +343,7 @@ struct clk_hw *clk_hw_register_gate(struct device *dev, const char *name,
 		u8 clk_gate_flags, spinlock_t *lock);
 void clk_unregister_gate(struct clk *clk);
 void clk_hw_unregister_gate(struct clk_hw *hw);
+int clk_gate_is_enabled(struct clk_hw *hw);
 
 struct clk_div_table {
 	unsigned int	val;
-- 
cgit v1.2.3


From 3e4d618b0722b64c551c3f2fc4c4f9cb3558ed93 Mon Sep 17 00:00:00 2001
From: Gabriel Fernandez <gabriel.fernandez@st.com>
Date: Mon, 21 Aug 2017 13:59:02 +0200
Subject: clk: stm32h7: Add stm32h743 clock driver

This patch enables clocks for STM32H743 boards.

Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>

for MFD changes:
Acked-by: Lee Jones <lee.jones@linaro.org>

for DT-Bindings
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
---
 .../devicetree/bindings/clock/st,stm32h7-rcc.txt   |   71 +
 drivers/clk/Makefile                               |    1 +
 drivers/clk/clk-stm32h7.c                          | 1410 ++++++++++++++++++++
 include/dt-bindings/clock/stm32h7-clks.h           |  165 +++
 include/dt-bindings/mfd/stm32h7-rcc.h              |  136 ++
 5 files changed, 1783 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/clock/st,stm32h7-rcc.txt
 create mode 100644 drivers/clk/clk-stm32h7.c
 create mode 100644 include/dt-bindings/clock/stm32h7-clks.h
 create mode 100644 include/dt-bindings/mfd/stm32h7-rcc.h

diff --git a/Documentation/devicetree/bindings/clock/st,stm32h7-rcc.txt b/Documentation/devicetree/bindings/clock/st,stm32h7-rcc.txt
new file mode 100644
index 000000000000..a135504c7d57
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/st,stm32h7-rcc.txt
@@ -0,0 +1,71 @@
+STMicroelectronics STM32H7 Reset and Clock Controller
+=====================================================
+
+The RCC IP is both a reset and a clock controller.
+
+Please refer to clock-bindings.txt for common clock controller binding usage.
+Please also refer to reset.txt for common reset controller binding usage.
+
+Required properties:
+- compatible: Should be:
+  "st,stm32h743-rcc"
+
+- reg: should be register base and length as documented in the
+  datasheet
+
+- #reset-cells: 1, see below
+
+- #clock-cells : from common clock binding; shall be set to 1
+
+- clocks: External oscillator clock phandle
+  - high speed external clock signal (HSE)
+  - low speed external clock signal (LSE)
+  - external I2S clock (I2S_CKIN)
+
+Optional properties:
+- st,syscfg: phandle for pwrcfg, mandatory to disable/enable backup domain
+  write protection (RTC clock).
+
+Example:
+
+	rcc: reset-clock-controller@58024400 {
+		compatible = "st,stm32h743-rcc", "st,stm32-rcc";
+		reg = <0x58024400 0x400>;
+		#reset-cells = <1>;
+		#clock-cells = <2>;
+		clocks = <&clk_hse>, <&clk_lse>, <&clk_i2s_ckin>;
+
+		st,syscfg = <&pwrcfg>;
+};
+
+The peripheral clock consumer should specify the desired clock by
+having the clock ID in its "clocks" phandle cell.
+
+Example:
+
+		timer5: timer@40000c00 {
+			compatible = "st,stm32-timer";
+			reg = <0x40000c00 0x400>;
+			interrupts = <50>;
+			clocks = <&rcc TIM5_CK>;
+		};
+
+Specifying softreset control of devices
+=======================================
+
+Device nodes should specify the reset channel required in their "resets"
+property, containing a phandle to the reset device node and an index specifying
+which channel to use.
+The index is the bit number within the RCC registers bank, starting from RCC
+base address.
+It is calculated as: index = register_offset / 4 * 32 + bit_offset.
+Where bit_offset is the bit offset within the register.
+
+For example, for CRC reset:
+  crc = AHB4RSTR_offset / 4 * 32 + CRCRST_bit_offset = 0x88 / 4 * 32 + 19 = 1107
+
+Example:
+
+	timer2 {
+		resets	= <&rcc STM32H7_APB1L_RESET(TIM2)>;
+	};
diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index 72e7c0eef32f..f87d085805a9 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -45,6 +45,7 @@ obj-$(CONFIG_COMMON_CLK_SI5351)		+= clk-si5351.o
 obj-$(CONFIG_COMMON_CLK_SI514)		+= clk-si514.o
 obj-$(CONFIG_COMMON_CLK_SI570)		+= clk-si570.o
 obj-$(CONFIG_ARCH_STM32)		+= clk-stm32f4.o
+obj-$(CONFIG_ARCH_STM32)		+= clk-stm32h7.o
 obj-$(CONFIG_ARCH_TANGO)		+= clk-tango4.o
 obj-$(CONFIG_CLK_TWL6040)		+= clk-twl6040.o
 obj-$(CONFIG_ARCH_U300)			+= clk-u300.o
diff --git a/drivers/clk/clk-stm32h7.c b/drivers/clk/clk-stm32h7.c
new file mode 100644
index 000000000000..a94c3f56c590
--- /dev/null
+++ b/drivers/clk/clk-stm32h7.c
@@ -0,0 +1,1410 @@
+/*
+ * Copyright (C) Gabriel Fernandez 2017
+ * Author: Gabriel Fernandez <gabriel.fernandez@st.com>
+ *
+ * License terms: GPL V2.0.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/mfd/syscon.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/regmap.h>
+
+#include <dt-bindings/clock/stm32h7-clks.h>
+
+/* Reset Clock Control Registers */
+#define RCC_CR		0x00
+#define RCC_CFGR	0x10
+#define RCC_D1CFGR	0x18
+#define RCC_D2CFGR	0x1C
+#define RCC_D3CFGR	0x20
+#define RCC_PLLCKSELR	0x28
+#define RCC_PLLCFGR	0x2C
+#define RCC_PLL1DIVR	0x30
+#define RCC_PLL1FRACR	0x34
+#define RCC_PLL2DIVR	0x38
+#define RCC_PLL2FRACR	0x3C
+#define RCC_PLL3DIVR	0x40
+#define RCC_PLL3FRACR	0x44
+#define RCC_D1CCIPR	0x4C
+#define RCC_D2CCIP1R	0x50
+#define RCC_D2CCIP2R	0x54
+#define RCC_D3CCIPR	0x58
+#define RCC_BDCR	0x70
+#define RCC_CSR		0x74
+#define RCC_AHB3ENR	0xD4
+#define RCC_AHB1ENR	0xD8
+#define RCC_AHB2ENR	0xDC
+#define RCC_AHB4ENR	0xE0
+#define RCC_APB3ENR	0xE4
+#define RCC_APB1LENR	0xE8
+#define RCC_APB1HENR	0xEC
+#define RCC_APB2ENR	0xF0
+#define RCC_APB4ENR	0xF4
+
+static DEFINE_SPINLOCK(stm32rcc_lock);
+
+static void __iomem *base;
+static struct clk_hw **hws;
+
+/* System clock parent */
+static const char * const sys_src[] = {
+	"hsi_ck", "csi_ck", "hse_ck", "pll1_p" };
+
+static const char * const tracein_src[] = {
+	"hsi_ck", "csi_ck", "hse_ck", "pll1_r" };
+
+static const char * const per_src[] = {
+	"hsi_ker", "csi_ker", "hse_ck", "disabled" };
+
+static const char * const pll_src[] = {
+	"hsi_ck", "csi_ck", "hse_ck", "no clock" };
+
+static const char * const sdmmc_src[] = { "pll1_q", "pll2_r" };
+
+static const char * const dsi_src[] = { "ck_dsi_phy", "pll2_q" };
+
+static const char * const qspi_src[] = {
+	"hclk", "pll1_q", "pll2_r", "per_ck" };
+
+static const char * const fmc_src[] = {
+	"hclk", "pll1_q", "pll2_r", "per_ck" };
+
+/* Kernel clock parent */
+static const char * const swp_src[] = {	"pclk1", "hsi_ker" };
+
+static const char * const fdcan_src[] = { "hse_ck", "pll1_q", "pll2_q" };
+
+static const char * const dfsdm1_src[] = { "pclk2", "sys_ck" };
+
+static const char * const spdifrx_src[] = {
+	"pll1_q", "pll2_r", "pll3_r", "hsi_ker" };
+
+static const char *spi_src1[5] = {
+	"pll1_q", "pll2_p", "pll3_p", NULL, "per_ck" };
+
+static const char * const spi_src2[] = {
+	"pclk2", "pll2_q", "pll3_q", "hsi_ker", "csi_ker", "hse_ck" };
+
+static const char * const spi_src3[] = {
+	"pclk4", "pll2_q", "pll3_q", "hsi_ker", "csi_ker", "hse_ck" };
+
+static const char * const lptim_src1[] = {
+	"pclk1", "pll2_p", "pll3_r", "lse_ck", "lsi_ck", "per_ck" };
+
+static const char * const lptim_src2[] = {
+	"pclk4", "pll2_p", "pll3_r", "lse_ck", "lsi_ck", "per_ck" };
+
+static const char * const cec_src[] = {"lse_ck", "lsi_ck", "csi_ker_div122" };
+
+static const char * const usbotg_src[] = {"pll1_q", "pll3_q", "rc48_ck" };
+
+/* i2c 1,2,3 src */
+static const char * const i2c_src1[] = {
+	"pclk1", "pll3_r", "hsi_ker", "csi_ker" };
+
+static const char * const i2c_src2[] = {
+	"pclk4", "pll3_r", "hsi_ker", "csi_ker" };
+
+static const char * const rng_src[] = {
+	"rc48_ck", "pll1_q", "lse_ck", "lsi_ck" };
+
+/* usart 1,6 src */
+static const char * const usart_src1[] = {
+	"pclk2", "pll2_q", "pll3_q", "hsi_ker", "csi_ker", "lse_ck" };
+
+/* usart 2,3,4,5,7,8 src */
+static const char * const usart_src2[] = {
+	"pclk1", "pll2_q", "pll3_q", "hsi_ker", "csi_ker", "lse_ck" };
+
+static const char *sai_src[5] = {
+	"pll1_q", "pll2_p", "pll3_p", NULL, "per_ck" };
+
+static const char * const adc_src[] = { "pll2_p", "pll3_r", "per_ck" };
+
+/* lptim 2,3,4,5 src */
+static const char * const lpuart1_src[] = {
+	"pclk3", "pll2_q", "pll3_q", "csi_ker", "lse_ck" };
+
+static const char * const hrtim_src[] = { "tim2_ker", "d1cpre" };
+
+/* RTC clock parent */
+static const char * const rtc_src[] = { "off", "lse_ck", "lsi_ck", "hse_1M" };
+
+/* Micro-controller output clock parent */
+static const char * const mco_src1[] = {
+	"hsi_ck", "lse_ck", "hse_ck", "pll1_q",	"rc48_ck" };
+
+static const char * const mco_src2[] = {
+	"sys_ck", "pll2_p", "hse_ck", "pll1_p", "csi_ck", "lsi_ck" };
+
+/* LCD clock */
+static const char * const ltdc_src[] = {"pll3_r"};
+
+/* Gate clock with ready bit and backup domain management */
+struct stm32_ready_gate {
+	struct	clk_gate gate;
+	u8	bit_rdy;
+};
+
+#define to_ready_gate_clk(_rgate) container_of(_rgate, struct stm32_ready_gate,\
+		gate)
+
+#define RGATE_TIMEOUT 10000
+
+static int ready_gate_clk_enable(struct clk_hw *hw)
+{
+	struct clk_gate *gate = to_clk_gate(hw);
+	struct stm32_ready_gate *rgate = to_ready_gate_clk(gate);
+	int bit_status;
+	unsigned int timeout = RGATE_TIMEOUT;
+
+	if (clk_gate_ops.is_enabled(hw))
+		return 0;
+
+	clk_gate_ops.enable(hw);
+
+	/* We can't use readl_poll_timeout() because we can blocked if
+	 * someone enables this clock before clocksource changes.
+	 * Only jiffies counter is available. Jiffies are incremented by
+	 * interruptions and enable op does not allow to be interrupted.
+	 */
+	do {
+		bit_status = !(readl(gate->reg) & BIT(rgate->bit_rdy));
+
+		if (bit_status)
+			udelay(100);
+
+	} while (bit_status && --timeout);
+
+	return bit_status;
+}
+
+static void ready_gate_clk_disable(struct clk_hw *hw)
+{
+	struct clk_gate *gate = to_clk_gate(hw);
+	struct stm32_ready_gate *rgate = to_ready_gate_clk(gate);
+	int bit_status;
+	unsigned int timeout = RGATE_TIMEOUT;
+
+	if (!clk_gate_ops.is_enabled(hw))
+		return;
+
+	clk_gate_ops.disable(hw);
+
+	do {
+		bit_status = !!(readl(gate->reg) & BIT(rgate->bit_rdy));
+
+		if (bit_status)
+			udelay(100);
+
+	} while (bit_status && --timeout);
+}
+
+static const struct clk_ops ready_gate_clk_ops = {
+	.enable		= ready_gate_clk_enable,
+	.disable	= ready_gate_clk_disable,
+	.is_enabled	= clk_gate_is_enabled,
+};
+
+static struct clk_hw *clk_register_ready_gate(struct device *dev,
+		const char *name, const char *parent_name,
+		void __iomem *reg, u8 bit_idx, u8 bit_rdy,
+		unsigned long flags, spinlock_t *lock)
+{
+	struct stm32_ready_gate *rgate;
+	struct clk_init_data init = { NULL };
+	struct clk_hw *hw;
+	int ret;
+
+	rgate = kzalloc(sizeof(*rgate), GFP_KERNEL);
+	if (!rgate)
+		return ERR_PTR(-ENOMEM);
+
+	init.name = name;
+	init.ops = &ready_gate_clk_ops;
+	init.flags = flags;
+	init.parent_names = &parent_name;
+	init.num_parents = 1;
+
+	rgate->bit_rdy = bit_rdy;
+	rgate->gate.lock = lock;
+	rgate->gate.reg = reg;
+	rgate->gate.bit_idx = bit_idx;
+	rgate->gate.hw.init = &init;
+
+	hw = &rgate->gate.hw;
+	ret = clk_hw_register(dev, hw);
+	if (ret) {
+		kfree(rgate);
+		hw = ERR_PTR(ret);
+	}
+
+	return hw;
+}
+
+struct gate_cfg {
+	u32 offset;
+	u8  bit_idx;
+};
+
+struct muxdiv_cfg {
+	u32 offset;
+	u8 shift;
+	u8 width;
+};
+
+struct composite_clk_cfg {
+	struct gate_cfg *gate;
+	struct muxdiv_cfg *mux;
+	struct muxdiv_cfg *div;
+	const char *name;
+	const char * const *parent_name;
+	int num_parents;
+	u32 flags;
+};
+
+struct composite_clk_gcfg_t {
+	u8 flags;
+	const struct clk_ops *ops;
+};
+
+/*
+ * General config definition of a composite clock (only clock diviser for rate)
+ */
+struct composite_clk_gcfg {
+	struct composite_clk_gcfg_t *mux;
+	struct composite_clk_gcfg_t *div;
+	struct composite_clk_gcfg_t *gate;
+};
+
+#define M_CFG_MUX(_mux_ops, _mux_flags)\
+	.mux = &(struct composite_clk_gcfg_t) { _mux_flags, _mux_ops}
+
+#define M_CFG_DIV(_rate_ops, _rate_flags)\
+	.div = &(struct composite_clk_gcfg_t) {_rate_flags, _rate_ops}
+
+#define M_CFG_GATE(_gate_ops, _gate_flags)\
+	.gate = &(struct composite_clk_gcfg_t) { _gate_flags, _gate_ops}
+
+static struct clk_mux *_get_cmux(void __iomem *reg, u8 shift, u8 width,
+		u32 flags, spinlock_t *lock)
+{
+	struct clk_mux *mux;
+
+	mux = kzalloc(sizeof(*mux), GFP_KERNEL);
+	if (!mux)
+		return ERR_PTR(-ENOMEM);
+
+	mux->reg	= reg;
+	mux->shift	= shift;
+	mux->mask	= (1 << width) - 1;
+	mux->flags	= flags;
+	mux->lock	= lock;
+
+	return mux;
+}
+
+static struct clk_divider *_get_cdiv(void __iomem *reg, u8 shift, u8 width,
+		u32 flags, spinlock_t *lock)
+{
+	struct clk_divider *div;
+
+	div = kzalloc(sizeof(*div), GFP_KERNEL);
+
+	if (!div)
+		return ERR_PTR(-ENOMEM);
+
+	div->reg   = reg;
+	div->shift = shift;
+	div->width = width;
+	div->flags = flags;
+	div->lock  = lock;
+
+	return div;
+}
+
+static struct clk_gate *_get_cgate(void __iomem *reg, u8 bit_idx, u32 flags,
+		spinlock_t *lock)
+{
+	struct clk_gate *gate;
+
+	gate = kzalloc(sizeof(*gate), GFP_KERNEL);
+	if (!gate)
+		return ERR_PTR(-ENOMEM);
+
+	gate->reg	= reg;
+	gate->bit_idx	= bit_idx;
+	gate->flags	= flags;
+	gate->lock	= lock;
+
+	return gate;
+}
+
+struct composite_cfg {
+	struct clk_hw *mux_hw;
+	struct clk_hw *div_hw;
+	struct clk_hw *gate_hw;
+
+	const struct clk_ops *mux_ops;
+	const struct clk_ops *div_ops;
+	const struct clk_ops *gate_ops;
+};
+
+static void get_cfg_composite_div(const struct composite_clk_gcfg *gcfg,
+		const struct composite_clk_cfg *cfg,
+		struct composite_cfg *composite, spinlock_t *lock)
+{
+	struct clk_mux     *mux = NULL;
+	struct clk_divider *div = NULL;
+	struct clk_gate    *gate = NULL;
+	const struct clk_ops *mux_ops, *div_ops, *gate_ops;
+	struct clk_hw *mux_hw;
+	struct clk_hw *div_hw;
+	struct clk_hw *gate_hw;
+
+	mux_ops = div_ops = gate_ops = NULL;
+	mux_hw = div_hw = gate_hw = NULL;
+
+	if (gcfg->mux && gcfg->mux) {
+		mux = _get_cmux(base + cfg->mux->offset,
+				cfg->mux->shift,
+				cfg->mux->width,
+				gcfg->mux->flags, lock);
+
+		if (!IS_ERR(mux)) {
+			mux_hw = &mux->hw;
+			mux_ops = gcfg->mux->ops ?
+				  gcfg->mux->ops : &clk_mux_ops;
+		}
+	}
+
+	if (gcfg->div && cfg->div) {
+		div = _get_cdiv(base + cfg->div->offset,
+				cfg->div->shift,
+				cfg->div->width,
+				gcfg->div->flags, lock);
+
+		if (!IS_ERR(div)) {
+			div_hw = &div->hw;
+			div_ops = gcfg->div->ops ?
+				  gcfg->div->ops : &clk_divider_ops;
+		}
+	}
+
+	if (gcfg->gate && gcfg->gate) {
+		gate = _get_cgate(base + cfg->gate->offset,
+				cfg->gate->bit_idx,
+				gcfg->gate->flags, lock);
+
+		if (!IS_ERR(gate)) {
+			gate_hw = &gate->hw;
+			gate_ops = gcfg->gate->ops ?
+				   gcfg->gate->ops : &clk_gate_ops;
+		}
+	}
+
+	composite->mux_hw = mux_hw;
+	composite->mux_ops = mux_ops;
+
+	composite->div_hw = div_hw;
+	composite->div_ops = div_ops;
+
+	composite->gate_hw = gate_hw;
+	composite->gate_ops = gate_ops;
+}
+
+/* Kernel Timer */
+struct timer_ker {
+	u8 dppre_shift;
+	struct clk_hw hw;
+	spinlock_t *lock;
+};
+
+#define to_timer_ker(_hw) container_of(_hw, struct timer_ker, hw)
+
+static unsigned long timer_ker_recalc_rate(struct clk_hw *hw,
+		unsigned long parent_rate)
+{
+	struct timer_ker *clk_elem = to_timer_ker(hw);
+	u32 timpre;
+	u32 dppre_shift = clk_elem->dppre_shift;
+	u32 prescaler;
+	u32 mul;
+
+	timpre = (readl(base + RCC_CFGR) >> 15) & 0x01;
+
+	prescaler = (readl(base + RCC_D2CFGR) >> dppre_shift) & 0x03;
+
+	mul = 2;
+
+	if (prescaler < 4)
+		mul = 1;
+
+	else if (timpre && prescaler > 4)
+		mul = 4;
+
+	return parent_rate * mul;
+}
+
+static const struct clk_ops timer_ker_ops = {
+	.recalc_rate = timer_ker_recalc_rate,
+};
+
+static struct clk_hw *clk_register_stm32_timer_ker(struct device *dev,
+		const char *name, const char *parent_name,
+		unsigned long flags,
+		u8 dppre_shift,
+		spinlock_t *lock)
+{
+	struct timer_ker *element;
+	struct clk_init_data init;
+	struct clk_hw *hw;
+	int err;
+
+	element = kzalloc(sizeof(*element), GFP_KERNEL);
+	if (!element)
+		return ERR_PTR(-ENOMEM);
+
+	init.name = name;
+	init.ops = &timer_ker_ops;
+	init.flags = flags;
+	init.parent_names = &parent_name;
+	init.num_parents = 1;
+
+	element->hw.init = &init;
+	element->lock = lock;
+	element->dppre_shift = dppre_shift;
+
+	hw = &element->hw;
+	err = clk_hw_register(dev, hw);
+
+	if (err) {
+		kfree(element);
+		return ERR_PTR(err);
+	}
+
+	return hw;
+}
+
+static const struct clk_div_table d1cpre_div_table[] = {
+	{ 0, 1 }, { 1, 1 }, { 2, 1 }, { 3, 1},
+	{ 4, 1 }, { 5, 1 }, { 6, 1 }, { 7, 1},
+	{ 8, 2 }, { 9, 4 }, { 10, 8 }, { 11, 16 },
+	{ 12, 64 }, { 13, 128 }, { 14, 256 },
+	{ 15, 512 },
+	{ 0 },
+};
+
+static const struct clk_div_table ppre_div_table[] = {
+	{ 0, 1 }, { 1, 1 }, { 2, 1 }, { 3, 1},
+	{ 4, 2 }, { 5, 4 }, { 6, 8 }, { 7, 16 },
+	{ 0 },
+};
+
+static void register_core_and_bus_clocks(void)
+{
+	/* CORE AND BUS */
+	hws[SYS_D1CPRE] = clk_hw_register_divider_table(NULL, "d1cpre",
+			"sys_ck", CLK_IGNORE_UNUSED, base + RCC_D1CFGR, 8, 4, 0,
+			d1cpre_div_table, &stm32rcc_lock);
+
+	hws[HCLK] = clk_hw_register_divider_table(NULL, "hclk", "d1cpre",
+			CLK_IGNORE_UNUSED, base + RCC_D1CFGR, 0, 4, 0,
+			d1cpre_div_table, &stm32rcc_lock);
+
+	/* D1 DOMAIN */
+	/* * CPU Systick */
+	hws[CPU_SYSTICK] = clk_hw_register_fixed_factor(NULL, "systick",
+			"d1cpre", 0, 1, 8);
+
+	/* * APB3 peripheral */
+	hws[PCLK3] = clk_hw_register_divider_table(NULL, "pclk3", "hclk", 0,
+			base + RCC_D1CFGR, 4, 3, 0,
+			ppre_div_table, &stm32rcc_lock);
+
+	/* D2 DOMAIN */
+	/* * APB1 peripheral */
+	hws[PCLK1] = clk_hw_register_divider_table(NULL, "pclk1", "hclk", 0,
+			base + RCC_D2CFGR, 4, 3, 0,
+			ppre_div_table, &stm32rcc_lock);
+
+	/* Timers prescaler clocks */
+	clk_register_stm32_timer_ker(NULL, "tim1_ker", "pclk1", 0,
+			4, &stm32rcc_lock);
+
+	/* * APB2 peripheral */
+	hws[PCLK2] = clk_hw_register_divider_table(NULL, "pclk2", "hclk", 0,
+			base + RCC_D2CFGR, 8, 3, 0, ppre_div_table,
+			&stm32rcc_lock);
+
+	clk_register_stm32_timer_ker(NULL, "tim2_ker", "pclk2", 0, 8,
+			&stm32rcc_lock);
+
+	/* D3 DOMAIN */
+	/* * APB4 peripheral */
+	hws[PCLK4] = clk_hw_register_divider_table(NULL, "pclk4", "hclk", 0,
+			base + RCC_D3CFGR, 4, 3, 0,
+			ppre_div_table, &stm32rcc_lock);
+}
+
+/* MUX clock configuration */
+struct stm32_mux_clk {
+	const char *name;
+	const char * const *parents;
+	u8 num_parents;
+	u32 offset;
+	u8 shift;
+	u8 width;
+	u32 flags;
+};
+
+#define M_MCLOCF(_name, _parents, _mux_offset, _mux_shift, _mux_width, _flags)\
+{\
+	.name		= _name,\
+	.parents	= _parents,\
+	.num_parents	= ARRAY_SIZE(_parents),\
+	.offset		= _mux_offset,\
+	.shift		= _mux_shift,\
+	.width		= _mux_width,\
+	.flags		= _flags,\
+}
+
+#define M_MCLOC(_name, _parents, _mux_offset, _mux_shift, _mux_width)\
+	M_MCLOCF(_name, _parents, _mux_offset, _mux_shift, _mux_width, 0)\
+
+static const struct stm32_mux_clk stm32_mclk[] __initconst = {
+	M_MCLOC("per_ck",	per_src,	RCC_D1CCIPR,	28, 3),
+	M_MCLOC("pllsrc",	pll_src,	RCC_PLLCKSELR,	 0, 3),
+	M_MCLOC("sys_ck",	sys_src,	RCC_CFGR,	 0, 3),
+	M_MCLOC("tracein_ck",	tracein_src,	RCC_CFGR,	 0, 3),
+};
+
+/* Oscillary clock configuration */
+struct stm32_osc_clk {
+	const char *name;
+	const char *parent;
+	u32 gate_offset;
+	u8 bit_idx;
+	u8 bit_rdy;
+	u32 flags;
+};
+
+#define OSC_CLKF(_name, _parent, _gate_offset, _bit_idx, _bit_rdy, _flags)\
+{\
+	.name		= _name,\
+	.parent		= _parent,\
+	.gate_offset	= _gate_offset,\
+	.bit_idx	= _bit_idx,\
+	.bit_rdy	= _bit_rdy,\
+	.flags		= _flags,\
+}
+
+#define OSC_CLK(_name, _parent, _gate_offset, _bit_idx, _bit_rdy)\
+	OSC_CLKF(_name, _parent, _gate_offset, _bit_idx, _bit_rdy, 0)
+
+static const struct stm32_osc_clk stm32_oclk[] __initconst = {
+	OSC_CLKF("hsi_ck",  "hsidiv",   RCC_CR,   0,  2, CLK_IGNORE_UNUSED),
+	OSC_CLKF("hsi_ker", "hsidiv",   RCC_CR,   1,  2, CLK_IGNORE_UNUSED),
+	OSC_CLKF("csi_ck",  "clk-csi",  RCC_CR,   7,  8, CLK_IGNORE_UNUSED),
+	OSC_CLKF("csi_ker", "clk-csi",  RCC_CR,   9,  8, CLK_IGNORE_UNUSED),
+	OSC_CLKF("rc48_ck", "clk-rc48", RCC_CR,  12, 13, CLK_IGNORE_UNUSED),
+	OSC_CLKF("lsi_ck",  "clk-lsi",  RCC_CSR,  0,  1, CLK_IGNORE_UNUSED),
+};
+
+/* PLL configuration */
+struct st32h7_pll_cfg {
+	u8 bit_idx;
+	u32 offset_divr;
+	u8 bit_frac_en;
+	u32 offset_frac;
+	u8 divm;
+};
+
+struct stm32_pll_data {
+	const char *name;
+	const char *parent_name;
+	unsigned long flags;
+	const struct st32h7_pll_cfg *cfg;
+};
+
+static const struct st32h7_pll_cfg stm32h7_pll1 = {
+	.bit_idx = 24,
+	.offset_divr = RCC_PLL1DIVR,
+	.bit_frac_en = 0,
+	.offset_frac = RCC_PLL1FRACR,
+	.divm = 4,
+};
+
+static const struct st32h7_pll_cfg stm32h7_pll2 = {
+	.bit_idx = 26,
+	.offset_divr = RCC_PLL2DIVR,
+	.bit_frac_en = 4,
+	.offset_frac = RCC_PLL2FRACR,
+	.divm = 12,
+};
+
+static const struct st32h7_pll_cfg stm32h7_pll3 = {
+	.bit_idx = 28,
+	.offset_divr = RCC_PLL3DIVR,
+	.bit_frac_en = 8,
+	.offset_frac = RCC_PLL3FRACR,
+	.divm = 20,
+};
+
+static const struct stm32_pll_data stm32_pll[] = {
+	{ "vco1", "pllsrc", CLK_IGNORE_UNUSED, &stm32h7_pll1 },
+	{ "vco2", "pllsrc", 0, &stm32h7_pll2 },
+	{ "vco3", "pllsrc", 0, &stm32h7_pll3 },
+};
+
+struct stm32_fractional_divider {
+	void __iomem	*mreg;
+	u8		mshift;
+	u8		mwidth;
+	u32		mmask;
+
+	void __iomem	*nreg;
+	u8		nshift;
+	u8		nwidth;
+
+	void __iomem	*freg_status;
+	u8		freg_bit;
+	void __iomem	*freg_value;
+	u8		fshift;
+	u8		fwidth;
+
+	u8		flags;
+	struct clk_hw	hw;
+	spinlock_t	*lock;
+};
+
+struct stm32_pll_obj {
+	spinlock_t *lock;
+	struct stm32_fractional_divider div;
+	struct stm32_ready_gate rgate;
+	struct clk_hw hw;
+};
+
+#define to_pll(_hw) container_of(_hw, struct stm32_pll_obj, hw)
+
+static int pll_is_enabled(struct clk_hw *hw)
+{
+	struct stm32_pll_obj *clk_elem = to_pll(hw);
+	struct clk_hw *_hw = &clk_elem->rgate.gate.hw;
+
+	__clk_hw_set_clk(_hw, hw);
+
+	return ready_gate_clk_ops.is_enabled(_hw);
+}
+
+static int pll_enable(struct clk_hw *hw)
+{
+	struct stm32_pll_obj *clk_elem = to_pll(hw);
+	struct clk_hw *_hw = &clk_elem->rgate.gate.hw;
+
+	__clk_hw_set_clk(_hw, hw);
+
+	return ready_gate_clk_ops.enable(_hw);
+}
+
+static void pll_disable(struct clk_hw *hw)
+{
+	struct stm32_pll_obj *clk_elem = to_pll(hw);
+	struct clk_hw *_hw = &clk_elem->rgate.gate.hw;
+
+	__clk_hw_set_clk(_hw, hw);
+
+	ready_gate_clk_ops.disable(_hw);
+}
+
+static int pll_frac_is_enabled(struct clk_hw *hw)
+{
+	struct stm32_pll_obj *clk_elem = to_pll(hw);
+	struct stm32_fractional_divider *fd = &clk_elem->div;
+
+	return (readl(fd->freg_status) >> fd->freg_bit) & 0x01;
+}
+
+static unsigned long pll_read_frac(struct clk_hw *hw)
+{
+	struct stm32_pll_obj *clk_elem = to_pll(hw);
+	struct stm32_fractional_divider *fd = &clk_elem->div;
+
+	return (readl(fd->freg_value) >> fd->fshift) &
+		GENMASK(fd->fwidth - 1, 0);
+}
+
+static unsigned long pll_fd_recalc_rate(struct clk_hw *hw,
+		unsigned long parent_rate)
+{
+	struct stm32_pll_obj *clk_elem = to_pll(hw);
+	struct stm32_fractional_divider *fd = &clk_elem->div;
+	unsigned long m, n;
+	u32 val, mask;
+	u64 rate, rate1 = 0;
+
+	val = readl(fd->mreg);
+	mask = GENMASK(fd->mwidth - 1, 0) << fd->mshift;
+	m = (val & mask) >> fd->mshift;
+
+	val = readl(fd->nreg);
+	mask = GENMASK(fd->nwidth - 1, 0) << fd->nshift;
+	n = ((val & mask) >> fd->nshift) + 1;
+
+	if (!n || !m)
+		return parent_rate;
+
+	rate = (u64)parent_rate * n;
+	do_div(rate, m);
+
+	if (pll_frac_is_enabled(hw)) {
+		val = pll_read_frac(hw);
+		rate1 = (u64)parent_rate * (u64)val;
+		do_div(rate1, (m * 8191));
+	}
+
+	return rate + rate1;
+}
+
+static const struct clk_ops pll_ops = {
+	.enable		= pll_enable,
+	.disable	= pll_disable,
+	.is_enabled	= pll_is_enabled,
+	.recalc_rate	= pll_fd_recalc_rate,
+};
+
+static struct clk_hw *clk_register_stm32_pll(struct device *dev,
+		const char *name,
+		const char *parent,
+		unsigned long flags,
+		const struct st32h7_pll_cfg *cfg,
+		spinlock_t *lock)
+{
+	struct stm32_pll_obj *pll;
+	struct clk_init_data init = { NULL };
+	struct clk_hw *hw;
+	int ret;
+	struct stm32_fractional_divider *div = NULL;
+	struct stm32_ready_gate *rgate;
+
+	pll = kzalloc(sizeof(*pll), GFP_KERNEL);
+	if (!pll)
+		return ERR_PTR(-ENOMEM);
+
+	init.name = name;
+	init.ops = &pll_ops;
+	init.flags = flags;
+	init.parent_names = &parent;
+	init.num_parents = 1;
+	pll->hw.init = &init;
+
+	hw = &pll->hw;
+	rgate = &pll->rgate;
+
+	rgate->bit_rdy = cfg->bit_idx + 1;
+	rgate->gate.lock = lock;
+	rgate->gate.reg = base + RCC_CR;
+	rgate->gate.bit_idx = cfg->bit_idx;
+
+	div = &pll->div;
+	div->flags = 0;
+	div->mreg = base + RCC_PLLCKSELR;
+	div->mshift = cfg->divm;
+	div->mwidth = 6;
+	div->nreg = base +  cfg->offset_divr;
+	div->nshift = 0;
+	div->nwidth = 9;
+
+	div->freg_status = base + RCC_PLLCFGR;
+	div->freg_bit = cfg->bit_frac_en;
+	div->freg_value = base +  cfg->offset_frac;
+	div->fshift = 3;
+	div->fwidth = 13;
+
+	div->lock = lock;
+
+	ret = clk_hw_register(dev, hw);
+	if (ret) {
+		kfree(pll);
+		hw = ERR_PTR(ret);
+	}
+
+	return hw;
+}
+
+/* ODF CLOCKS */
+static unsigned long odf_divider_recalc_rate(struct clk_hw *hw,
+		unsigned long parent_rate)
+{
+	return clk_divider_ops.recalc_rate(hw, parent_rate);
+}
+
+static long odf_divider_round_rate(struct clk_hw *hw, unsigned long rate,
+		unsigned long *prate)
+{
+	return clk_divider_ops.round_rate(hw, rate, prate);
+}
+
+static int odf_divider_set_rate(struct clk_hw *hw, unsigned long rate,
+		unsigned long parent_rate)
+{
+	struct clk_hw *hwp;
+	int pll_status;
+	int ret;
+
+	hwp = clk_hw_get_parent(hw);
+
+	pll_status = pll_is_enabled(hwp);
+
+	if (pll_status)
+		pll_disable(hwp);
+
+	ret = clk_divider_ops.set_rate(hw, rate, parent_rate);
+
+	if (pll_status)
+		pll_enable(hwp);
+
+	return ret;
+}
+
+static const struct clk_ops odf_divider_ops = {
+	.recalc_rate	= odf_divider_recalc_rate,
+	.round_rate	= odf_divider_round_rate,
+	.set_rate	= odf_divider_set_rate,
+};
+
+static int odf_gate_enable(struct clk_hw *hw)
+{
+	struct clk_hw *hwp;
+	int pll_status;
+	int ret;
+
+	if (clk_gate_ops.is_enabled(hw))
+		return 0;
+
+	hwp = clk_hw_get_parent(hw);
+
+	pll_status = pll_is_enabled(hwp);
+
+	if (pll_status)
+		pll_disable(hwp);
+
+	ret = clk_gate_ops.enable(hw);
+
+	if (pll_status)
+		pll_enable(hwp);
+
+	return ret;
+}
+
+static void odf_gate_disable(struct clk_hw *hw)
+{
+	struct clk_hw *hwp;
+	int pll_status;
+
+	if (!clk_gate_ops.is_enabled(hw))
+		return;
+
+	hwp = clk_hw_get_parent(hw);
+
+	pll_status = pll_is_enabled(hwp);
+
+	if (pll_status)
+		pll_disable(hwp);
+
+	clk_gate_ops.disable(hw);
+
+	if (pll_status)
+		pll_enable(hwp);
+}
+
+static const struct clk_ops odf_gate_ops = {
+	.enable		= odf_gate_enable,
+	.disable	= odf_gate_disable,
+	.is_enabled	= clk_gate_is_enabled,
+};
+
+static struct composite_clk_gcfg odf_clk_gcfg = {
+	M_CFG_DIV(&odf_divider_ops, 0),
+	M_CFG_GATE(&odf_gate_ops, 0),
+};
+
+#define M_ODF_F(_name, _parent, _gate_offset,  _bit_idx, _rate_offset,\
+		_rate_shift, _rate_width, _flags)\
+{\
+	.mux = NULL,\
+	.div = &(struct muxdiv_cfg) {_rate_offset, _rate_shift, _rate_width},\
+	.gate = &(struct gate_cfg) {_gate_offset, _bit_idx },\
+	.name = _name,\
+	.parent_name = &(const char *) {_parent},\
+	.num_parents = 1,\
+	.flags = _flags,\
+}
+
+#define M_ODF(_name, _parent, _gate_offset,  _bit_idx, _rate_offset,\
+		_rate_shift, _rate_width)\
+M_ODF_F(_name, _parent, _gate_offset,  _bit_idx, _rate_offset,\
+		_rate_shift, _rate_width, 0)\
+
+static const struct composite_clk_cfg stm32_odf[3][3] = {
+	{
+		M_ODF_F("pll1_p", "vco1", RCC_PLLCFGR, 16, RCC_PLL1DIVR,  9, 7,
+				CLK_IGNORE_UNUSED),
+		M_ODF_F("pll1_q", "vco1", RCC_PLLCFGR, 17, RCC_PLL1DIVR, 16, 7,
+				CLK_IGNORE_UNUSED),
+		M_ODF_F("pll1_r", "vco1", RCC_PLLCFGR, 18, RCC_PLL1DIVR, 24, 7,
+				CLK_IGNORE_UNUSED),
+	},
+
+	{
+		M_ODF("pll2_p", "vco2", RCC_PLLCFGR, 19, RCC_PLL2DIVR,  9, 7),
+		M_ODF("pll2_q", "vco2", RCC_PLLCFGR, 20, RCC_PLL2DIVR, 16, 7),
+		M_ODF("pll2_r", "vco2", RCC_PLLCFGR, 21, RCC_PLL2DIVR, 24, 7),
+	},
+	{
+		M_ODF("pll3_p", "vco3", RCC_PLLCFGR, 22, RCC_PLL3DIVR,  9, 7),
+		M_ODF("pll3_q", "vco3", RCC_PLLCFGR, 23, RCC_PLL3DIVR, 16, 7),
+		M_ODF("pll3_r", "vco3", RCC_PLLCFGR, 24, RCC_PLL3DIVR, 24, 7),
+	}
+};
+
+/* PERIF CLOCKS */
+struct pclk_t {
+	u32 gate_offset;
+	u8 bit_idx;
+	const char *name;
+	const char *parent;
+	u32 flags;
+};
+
+#define PER_CLKF(_gate_offset, _bit_idx, _name, _parent, _flags)\
+{\
+	.gate_offset	= _gate_offset,\
+	.bit_idx	= _bit_idx,\
+	.name		= _name,\
+	.parent		= _parent,\
+	.flags		= _flags,\
+}
+
+#define PER_CLK(_gate_offset, _bit_idx, _name, _parent)\
+	PER_CLKF(_gate_offset, _bit_idx, _name, _parent, 0)
+
+static const struct pclk_t pclk[] = {
+	PER_CLK(RCC_AHB3ENR, 31, "d1sram1", "hclk"),
+	PER_CLK(RCC_AHB3ENR, 30, "itcm", "hclk"),
+	PER_CLK(RCC_AHB3ENR, 29, "dtcm2", "hclk"),
+	PER_CLK(RCC_AHB3ENR, 28, "dtcm1", "hclk"),
+	PER_CLK(RCC_AHB3ENR, 8, "flitf", "hclk"),
+	PER_CLK(RCC_AHB3ENR, 5, "jpgdec", "hclk"),
+	PER_CLK(RCC_AHB3ENR, 4, "dma2d", "hclk"),
+	PER_CLK(RCC_AHB3ENR, 0, "mdma", "hclk"),
+	PER_CLK(RCC_AHB1ENR, 28, "usb2ulpi", "hclk"),
+	PER_CLK(RCC_AHB1ENR, 26, "usb1ulpi", "hclk"),
+	PER_CLK(RCC_AHB1ENR, 17, "eth1rx", "hclk"),
+	PER_CLK(RCC_AHB1ENR, 16, "eth1tx", "hclk"),
+	PER_CLK(RCC_AHB1ENR, 15, "eth1mac", "hclk"),
+	PER_CLK(RCC_AHB1ENR, 14, "art", "hclk"),
+	PER_CLK(RCC_AHB1ENR, 1, "dma2", "hclk"),
+	PER_CLK(RCC_AHB1ENR, 0, "dma1", "hclk"),
+	PER_CLK(RCC_AHB2ENR, 31, "d2sram3", "hclk"),
+	PER_CLK(RCC_AHB2ENR, 30, "d2sram2", "hclk"),
+	PER_CLK(RCC_AHB2ENR, 29, "d2sram1", "hclk"),
+	PER_CLK(RCC_AHB2ENR, 5, "hash", "hclk"),
+	PER_CLK(RCC_AHB2ENR, 4, "crypt", "hclk"),
+	PER_CLK(RCC_AHB2ENR, 0, "camitf", "hclk"),
+	PER_CLK(RCC_AHB4ENR, 28, "bkpram", "hclk"),
+	PER_CLK(RCC_AHB4ENR, 25, "hsem", "hclk"),
+	PER_CLK(RCC_AHB4ENR, 21, "bdma", "hclk"),
+	PER_CLK(RCC_AHB4ENR, 19, "crc", "hclk"),
+	PER_CLK(RCC_AHB4ENR, 10, "gpiok", "hclk"),
+	PER_CLK(RCC_AHB4ENR, 9, "gpioj", "hclk"),
+	PER_CLK(RCC_AHB4ENR, 8, "gpioi", "hclk"),
+	PER_CLK(RCC_AHB4ENR, 7, "gpioh", "hclk"),
+	PER_CLK(RCC_AHB4ENR, 6, "gpiog", "hclk"),
+	PER_CLK(RCC_AHB4ENR, 5, "gpiof", "hclk"),
+	PER_CLK(RCC_AHB4ENR, 4, "gpioe", "hclk"),
+	PER_CLK(RCC_AHB4ENR, 3, "gpiod", "hclk"),
+	PER_CLK(RCC_AHB4ENR, 2, "gpioc", "hclk"),
+	PER_CLK(RCC_AHB4ENR, 1, "gpiob", "hclk"),
+	PER_CLK(RCC_AHB4ENR, 0, "gpioa", "hclk"),
+	PER_CLK(RCC_APB3ENR, 6, "wwdg1", "pclk3"),
+	PER_CLK(RCC_APB1LENR, 29, "dac12", "pclk1"),
+	PER_CLK(RCC_APB1LENR, 11, "wwdg2", "pclk1"),
+	PER_CLK(RCC_APB1LENR, 8, "tim14", "tim1_ker"),
+	PER_CLK(RCC_APB1LENR, 7, "tim13", "tim1_ker"),
+	PER_CLK(RCC_APB1LENR, 6, "tim12", "tim1_ker"),
+	PER_CLK(RCC_APB1LENR, 5, "tim7", "tim1_ker"),
+	PER_CLK(RCC_APB1LENR, 4, "tim6", "tim1_ker"),
+	PER_CLK(RCC_APB1LENR, 3, "tim5", "tim1_ker"),
+	PER_CLK(RCC_APB1LENR, 2, "tim4", "tim1_ker"),
+	PER_CLK(RCC_APB1LENR, 1, "tim3", "tim1_ker"),
+	PER_CLK(RCC_APB1LENR, 0, "tim2", "tim1_ker"),
+	PER_CLK(RCC_APB1HENR, 5, "mdios", "pclk1"),
+	PER_CLK(RCC_APB1HENR, 4, "opamp", "pclk1"),
+	PER_CLK(RCC_APB1HENR, 1, "crs", "pclk1"),
+	PER_CLK(RCC_APB2ENR, 18, "tim17", "tim2_ker"),
+	PER_CLK(RCC_APB2ENR, 17, "tim16", "tim2_ker"),
+	PER_CLK(RCC_APB2ENR, 16, "tim15", "tim2_ker"),
+	PER_CLK(RCC_APB2ENR, 1, "tim8", "tim2_ker"),
+	PER_CLK(RCC_APB2ENR, 0, "tim1", "tim2_ker"),
+	PER_CLK(RCC_APB4ENR, 26, "tmpsens", "pclk4"),
+	PER_CLK(RCC_APB4ENR, 16, "rtcapb", "pclk4"),
+	PER_CLK(RCC_APB4ENR, 15, "vref", "pclk4"),
+	PER_CLK(RCC_APB4ENR, 14, "comp12", "pclk4"),
+	PER_CLK(RCC_APB4ENR, 1, "syscfg", "pclk4"),
+};
+
+/* KERNEL CLOCKS */
+#define KER_CLKF(_gate_offset, _bit_idx,\
+		_mux_offset, _mux_shift, _mux_width,\
+		_name, _parent_name,\
+		_flags) \
+{ \
+	.gate = &(struct gate_cfg) {_gate_offset, _bit_idx},\
+	.mux = &(struct muxdiv_cfg) {_mux_offset, _mux_shift, _mux_width },\
+	.name = _name, \
+	.parent_name = _parent_name, \
+	.num_parents = ARRAY_SIZE(_parent_name),\
+	.flags = _flags,\
+}
+
+#define KER_CLK(_gate_offset, _bit_idx, _mux_offset, _mux_shift, _mux_width,\
+		_name, _parent_name) \
+KER_CLKF(_gate_offset, _bit_idx, _mux_offset, _mux_shift, _mux_width,\
+		_name, _parent_name, 0)\
+
+#define KER_CLKF_NOMUX(_gate_offset, _bit_idx,\
+		_name, _parent_name,\
+		_flags) \
+{ \
+	.gate = &(struct gate_cfg) {_gate_offset, _bit_idx},\
+	.mux = NULL,\
+	.name = _name, \
+	.parent_name = _parent_name, \
+	.num_parents = 1,\
+	.flags = _flags,\
+}
+
+static const struct composite_clk_cfg kclk[] = {
+	KER_CLK(RCC_AHB3ENR,  16, RCC_D1CCIPR,	16, 1, "sdmmc1", sdmmc_src),
+	KER_CLKF(RCC_AHB3ENR, 14, RCC_D1CCIPR,	 4, 2, "quadspi", qspi_src,
+			CLK_IGNORE_UNUSED),
+	KER_CLKF(RCC_AHB3ENR, 12, RCC_D1CCIPR,	 0, 2, "fmc", fmc_src,
+			CLK_IGNORE_UNUSED),
+	KER_CLK(RCC_AHB1ENR,  27, RCC_D2CCIP2R,	20, 2, "usb2otg", usbotg_src),
+	KER_CLK(RCC_AHB1ENR,  25, RCC_D2CCIP2R, 20, 2, "usb1otg", usbotg_src),
+	KER_CLK(RCC_AHB1ENR,   5, RCC_D3CCIPR,	16, 2, "adc12", adc_src),
+	KER_CLK(RCC_AHB2ENR,   9, RCC_D1CCIPR,	16, 1, "sdmmc2", sdmmc_src),
+	KER_CLK(RCC_AHB2ENR,   6, RCC_D2CCIP2R,	 8, 2, "rng", rng_src),
+	KER_CLK(RCC_AHB4ENR,  24, RCC_D3CCIPR,  16, 2, "adc3", adc_src),
+	KER_CLKF(RCC_APB3ENR,   4, RCC_D1CCIPR,	 8, 1, "dsi", dsi_src,
+			CLK_SET_RATE_PARENT),
+	KER_CLKF_NOMUX(RCC_APB3ENR, 3, "ltdc", ltdc_src, CLK_SET_RATE_PARENT),
+	KER_CLK(RCC_APB1LENR, 31, RCC_D2CCIP2R,  0, 3, "usart8", usart_src2),
+	KER_CLK(RCC_APB1LENR, 30, RCC_D2CCIP2R,  0, 3, "usart7", usart_src2),
+	KER_CLK(RCC_APB1LENR, 27, RCC_D2CCIP2R, 22, 2, "hdmicec", cec_src),
+	KER_CLK(RCC_APB1LENR, 23, RCC_D2CCIP2R, 12, 2, "i2c3", i2c_src1),
+	KER_CLK(RCC_APB1LENR, 22, RCC_D2CCIP2R, 12, 2, "i2c2", i2c_src1),
+	KER_CLK(RCC_APB1LENR, 21, RCC_D2CCIP2R, 12, 2, "i2c1", i2c_src1),
+	KER_CLK(RCC_APB1LENR, 20, RCC_D2CCIP2R,	 0, 3, "uart5", usart_src2),
+	KER_CLK(RCC_APB1LENR, 19, RCC_D2CCIP2R,  0, 3, "uart4", usart_src2),
+	KER_CLK(RCC_APB1LENR, 18, RCC_D2CCIP2R,  0, 3, "usart3", usart_src2),
+	KER_CLK(RCC_APB1LENR, 17, RCC_D2CCIP2R,  0, 3, "usart2", usart_src2),
+	KER_CLK(RCC_APB1LENR, 16, RCC_D2CCIP1R, 20, 2, "spdifrx", spdifrx_src),
+	KER_CLK(RCC_APB1LENR, 15, RCC_D2CCIP1R, 16, 3, "spi3", spi_src1),
+	KER_CLK(RCC_APB1LENR, 14, RCC_D2CCIP1R, 16, 3, "spi2", spi_src1),
+	KER_CLK(RCC_APB1LENR,  9, RCC_D2CCIP2R, 28, 3, "lptim1", lptim_src1),
+	KER_CLK(RCC_APB1HENR,  8, RCC_D2CCIP1R, 28, 2, "fdcan", fdcan_src),
+	KER_CLK(RCC_APB1HENR,  2, RCC_D2CCIP1R, 31, 1, "swp", swp_src),
+	KER_CLK(RCC_APB2ENR,  29, RCC_CFGR,	14, 1, "hrtim", hrtim_src),
+	KER_CLK(RCC_APB2ENR,  28, RCC_D2CCIP1R, 24, 1, "dfsdm1", dfsdm1_src),
+	KER_CLKF(RCC_APB2ENR,  24, RCC_D2CCIP1R,  6, 3, "sai3", sai_src,
+		 CLK_SET_RATE_PARENT | CLK_SET_RATE_NO_REPARENT),
+	KER_CLKF(RCC_APB2ENR,  23, RCC_D2CCIP1R,  6, 3, "sai2", sai_src,
+		 CLK_SET_RATE_PARENT | CLK_SET_RATE_NO_REPARENT),
+	KER_CLKF(RCC_APB2ENR,  22, RCC_D2CCIP1R,  0, 3, "sai1", sai_src,
+		 CLK_SET_RATE_PARENT | CLK_SET_RATE_NO_REPARENT),
+	KER_CLK(RCC_APB2ENR,  20, RCC_D2CCIP1R, 16, 3, "spi5", spi_src2),
+	KER_CLK(RCC_APB2ENR,  13, RCC_D2CCIP1R, 16, 3, "spi4", spi_src2),
+	KER_CLK(RCC_APB2ENR,  12, RCC_D2CCIP1R, 16, 3, "spi1", spi_src1),
+	KER_CLK(RCC_APB2ENR,   5, RCC_D2CCIP2R,  3, 3, "usart6", usart_src1),
+	KER_CLK(RCC_APB2ENR,   4, RCC_D2CCIP2R,  3, 3, "usart1", usart_src1),
+	KER_CLK(RCC_APB4ENR,  21, RCC_D3CCIPR,	24, 3, "sai4b", sai_src),
+	KER_CLK(RCC_APB4ENR,  21, RCC_D3CCIPR,	21, 3, "sai4a", sai_src),
+	KER_CLK(RCC_APB4ENR,  12, RCC_D3CCIPR,	13, 3, "lptim5", lptim_src2),
+	KER_CLK(RCC_APB4ENR,  11, RCC_D3CCIPR,	13, 3, "lptim4", lptim_src2),
+	KER_CLK(RCC_APB4ENR,  10, RCC_D3CCIPR,	13, 3, "lptim3", lptim_src2),
+	KER_CLK(RCC_APB4ENR,   9, RCC_D3CCIPR,	10, 3, "lptim2", lptim_src2),
+	KER_CLK(RCC_APB4ENR,   7, RCC_D3CCIPR,	 8, 2, "i2c4", i2c_src2),
+	KER_CLK(RCC_APB4ENR,   5, RCC_D3CCIPR,	28, 3, "spi6", spi_src3),
+	KER_CLK(RCC_APB4ENR,   3, RCC_D3CCIPR,	 0, 3, "lpuart1", lpuart1_src),
+};
+
+static struct composite_clk_gcfg kernel_clk_cfg = {
+	M_CFG_MUX(NULL, 0),
+	M_CFG_GATE(NULL, 0),
+};
+
+/* RTC clock */
+/*
+ * RTC & LSE registers are protected against parasitic write access.
+ * PWR_CR_DBP bit must be set to enable write access to RTC registers.
+ */
+/* STM32_PWR_CR */
+#define PWR_CR				0x00
+/* STM32_PWR_CR bit field */
+#define PWR_CR_DBP			BIT(8)
+
+static struct composite_clk_gcfg rtc_clk_cfg = {
+	M_CFG_MUX(NULL, 0),
+	M_CFG_GATE(NULL, 0),
+};
+
+static const struct composite_clk_cfg rtc_clk =
+	KER_CLK(RCC_BDCR, 15, RCC_BDCR, 8, 2, "rtc_ck", rtc_src);
+
+/* Micro-controller output clock */
+static struct composite_clk_gcfg mco_clk_cfg = {
+	M_CFG_MUX(NULL, 0),
+	M_CFG_DIV(NULL,	CLK_DIVIDER_ONE_BASED | CLK_DIVIDER_ALLOW_ZERO),
+};
+
+#define M_MCO_F(_name, _parents, _mux_offset,  _mux_shift, _mux_width,\
+		_rate_offset, _rate_shift, _rate_width,\
+		_flags)\
+{\
+	.mux = &(struct muxdiv_cfg) {_mux_offset, _mux_shift, _mux_width },\
+	.div = &(struct muxdiv_cfg) {_rate_offset, _rate_shift, _rate_width},\
+	.gate = NULL,\
+	.name = _name,\
+	.parent_name = _parents,\
+	.num_parents = ARRAY_SIZE(_parents),\
+	.flags = _flags,\
+}
+
+static const struct composite_clk_cfg mco_clk[] = {
+	M_MCO_F("mco1", mco_src1, RCC_CFGR, 22, 4, RCC_CFGR, 18, 4, 0),
+	M_MCO_F("mco2", mco_src2, RCC_CFGR, 29, 3, RCC_CFGR, 25, 4, 0),
+};
+
+static void __init stm32h7_rcc_init(struct device_node *np)
+{
+	struct clk_hw_onecell_data *clk_data;
+	struct composite_cfg c_cfg;
+	int n;
+	const char *hse_clk, *lse_clk, *i2s_clk;
+	struct regmap *pdrm;
+
+	clk_data = kzalloc(sizeof(*clk_data) +
+			sizeof(*clk_data->hws) * STM32H7_MAX_CLKS,
+			GFP_KERNEL);
+	if (!clk_data)
+		return;
+
+	clk_data->num = STM32H7_MAX_CLKS;
+
+	hws = clk_data->hws;
+
+	for (n = 0; n < STM32H7_MAX_CLKS; n++)
+		hws[n] = ERR_PTR(-ENOENT);
+
+	/* get RCC base @ from DT */
+	base = of_iomap(np, 0);
+	if (!base) {
+		pr_err("%s: unable to map resource", np->name);
+		goto err_free_clks;
+	}
+
+	pdrm = syscon_regmap_lookup_by_phandle(np, "st,syscfg");
+	if (IS_ERR(pdrm))
+		pr_warn("%s: Unable to get syscfg\n", __func__);
+	else
+		/* In any case disable backup domain write protection
+		 * and will never be enabled.
+		 * Needed by LSE & RTC clocks.
+		 */
+		regmap_update_bits(pdrm, PWR_CR, PWR_CR_DBP, PWR_CR_DBP);
+
+	/* Put parent names from DT */
+	hse_clk = of_clk_get_parent_name(np, 0);
+	lse_clk = of_clk_get_parent_name(np, 1);
+	i2s_clk = of_clk_get_parent_name(np, 2);
+
+	sai_src[3] = i2s_clk;
+	spi_src1[3] = i2s_clk;
+
+	/* Register Internal oscillators */
+	clk_hw_register_fixed_rate(NULL, "clk-hsi", NULL, 0, 64000000);
+	clk_hw_register_fixed_rate(NULL, "clk-csi", NULL, 0, 4000000);
+	clk_hw_register_fixed_rate(NULL, "clk-lsi", NULL, 0, 32000);
+	clk_hw_register_fixed_rate(NULL, "clk-rc48", NULL, 0, 48000);
+
+	/* This clock is coming from outside. Frequencies unknown */
+	hws[CK_DSI_PHY] = clk_hw_register_fixed_rate(NULL, "ck_dsi_phy", NULL,
+			0, 0);
+
+	hws[HSI_DIV] = clk_hw_register_divider(NULL, "hsidiv", "clk-hsi", 0,
+			base + RCC_CR, 3, 2, CLK_DIVIDER_POWER_OF_TWO,
+			&stm32rcc_lock);
+
+	hws[HSE_1M] = clk_hw_register_divider(NULL, "hse_1M", "hse_ck",	0,
+			base + RCC_CFGR, 8, 6, CLK_DIVIDER_ONE_BASED |
+			CLK_DIVIDER_ALLOW_ZERO,
+			&stm32rcc_lock);
+
+	/* Mux system clocks */
+	for (n = 0; n < ARRAY_SIZE(stm32_mclk); n++)
+		hws[MCLK_BANK + n] = clk_hw_register_mux(NULL,
+				stm32_mclk[n].name,
+				stm32_mclk[n].parents,
+				stm32_mclk[n].num_parents,
+				stm32_mclk[n].flags,
+				stm32_mclk[n].offset + base,
+				stm32_mclk[n].shift,
+				stm32_mclk[n].width,
+				0,
+				&stm32rcc_lock);
+
+	register_core_and_bus_clocks();
+
+	/* Oscillary clocks */
+	for (n = 0; n < ARRAY_SIZE(stm32_oclk); n++)
+		hws[OSC_BANK + n] = clk_register_ready_gate(NULL,
+				stm32_oclk[n].name,
+				stm32_oclk[n].parent,
+				stm32_oclk[n].gate_offset + base,
+				stm32_oclk[n].bit_idx,
+				stm32_oclk[n].bit_rdy,
+				stm32_oclk[n].flags,
+				&stm32rcc_lock);
+
+	hws[HSE_CK] = clk_register_ready_gate(NULL,
+				"hse_ck",
+				hse_clk,
+				RCC_CR + base,
+				16, 17,
+				0,
+				&stm32rcc_lock);
+
+	hws[LSE_CK] = clk_register_ready_gate(NULL,
+				"lse_ck",
+				lse_clk,
+				RCC_BDCR + base,
+				0, 1,
+				0,
+				&stm32rcc_lock);
+
+	hws[CSI_KER_DIV122 + n] = clk_hw_register_fixed_factor(NULL,
+			"csi_ker_div122", "csi_ker", 0, 1, 122);
+
+	/* PLLs */
+	for (n = 0; n < ARRAY_SIZE(stm32_pll); n++) {
+		int odf;
+
+		/* Register the VCO */
+		clk_register_stm32_pll(NULL, stm32_pll[n].name,
+				stm32_pll[n].parent_name, stm32_pll[n].flags,
+				stm32_pll[n].cfg,
+				&stm32rcc_lock);
+
+		/* Register the 3 output dividers */
+		for (odf = 0; odf < 3; odf++) {
+			int idx = n * 3 + odf;
+
+			get_cfg_composite_div(&odf_clk_gcfg, &stm32_odf[n][odf],
+					&c_cfg,	&stm32rcc_lock);
+
+			hws[ODF_BANK + idx] = clk_hw_register_composite(NULL,
+					stm32_odf[n][odf].name,
+					stm32_odf[n][odf].parent_name,
+					stm32_odf[n][odf].num_parents,
+					c_cfg.mux_hw, c_cfg.mux_ops,
+					c_cfg.div_hw, c_cfg.div_ops,
+					c_cfg.gate_hw, c_cfg.gate_ops,
+					stm32_odf[n][odf].flags);
+		}
+	}
+
+	/* Peripheral clocks */
+	for (n = 0; n < ARRAY_SIZE(pclk); n++)
+		hws[PERIF_BANK + n] = clk_hw_register_gate(NULL, pclk[n].name,
+				pclk[n].parent,
+				pclk[n].flags, base + pclk[n].gate_offset,
+				pclk[n].bit_idx, pclk[n].flags, &stm32rcc_lock);
+
+	/* Kernel clocks */
+	for (n = 0; n < ARRAY_SIZE(kclk); n++) {
+		get_cfg_composite_div(&kernel_clk_cfg, &kclk[n], &c_cfg,
+				&stm32rcc_lock);
+
+		hws[KERN_BANK + n] = clk_hw_register_composite(NULL,
+				kclk[n].name,
+				kclk[n].parent_name,
+				kclk[n].num_parents,
+				c_cfg.mux_hw, c_cfg.mux_ops,
+				c_cfg.div_hw, c_cfg.div_ops,
+				c_cfg.gate_hw, c_cfg.gate_ops,
+				kclk[n].flags);
+	}
+
+	/* RTC clock (default state is off) */
+	clk_hw_register_fixed_rate(NULL, "off", NULL, 0, 0);
+
+	get_cfg_composite_div(&rtc_clk_cfg, &rtc_clk, &c_cfg, &stm32rcc_lock);
+
+	hws[RTC_CK] = clk_hw_register_composite(NULL,
+			rtc_clk.name,
+			rtc_clk.parent_name,
+			rtc_clk.num_parents,
+			c_cfg.mux_hw, c_cfg.mux_ops,
+			c_cfg.div_hw, c_cfg.div_ops,
+			c_cfg.gate_hw, c_cfg.gate_ops,
+			rtc_clk.flags);
+
+	/* Micro-controller clocks */
+	for (n = 0; n < ARRAY_SIZE(mco_clk); n++) {
+		get_cfg_composite_div(&mco_clk_cfg, &mco_clk[n], &c_cfg,
+				&stm32rcc_lock);
+
+		hws[MCO_BANK + n] = clk_hw_register_composite(NULL,
+				mco_clk[n].name,
+				mco_clk[n].parent_name,
+				mco_clk[n].num_parents,
+				c_cfg.mux_hw, c_cfg.mux_ops,
+				c_cfg.div_hw, c_cfg.div_ops,
+				c_cfg.gate_hw, c_cfg.gate_ops,
+				mco_clk[n].flags);
+	}
+
+	of_clk_add_hw_provider(np, of_clk_hw_onecell_get, clk_data);
+
+	return;
+
+err_free_clks:
+	kfree(clk_data);
+}
+
+/* The RCC node is a clock and reset controller, and these
+ * functionalities are supported by different drivers that
+ * matches the same compatible strings.
+ */
+CLK_OF_DECLARE_DRIVER(stm32h7_rcc, "st,stm32h743-rcc", stm32h7_rcc_init);
diff --git a/include/dt-bindings/clock/stm32h7-clks.h b/include/dt-bindings/clock/stm32h7-clks.h
new file mode 100644
index 000000000000..6637272b3242
--- /dev/null
+++ b/include/dt-bindings/clock/stm32h7-clks.h
@@ -0,0 +1,165 @@
+/* SYS, CORE AND BUS CLOCKS */
+#define SYS_D1CPRE 0
+#define HCLK 1
+#define PCLK1 2
+#define PCLK2 3
+#define PCLK3 4
+#define PCLK4 5
+#define HSI_DIV 6
+#define HSE_1M 7
+#define I2S_CKIN 8
+#define CK_DSI_PHY 9
+#define HSE_CK 10
+#define LSE_CK 11
+#define CSI_KER_DIV122 12
+#define RTC_CK 13
+#define CPU_SYSTICK 14
+
+/* OSCILLATOR BANK */
+#define OSC_BANK 18
+#define HSI_CK 18
+#define HSI_KER_CK 19
+#define CSI_CK 20
+#define CSI_KER_CK 21
+#define RC48_CK 22
+#define LSI_CK 23
+
+/* MCLOCK BANK */
+#define MCLK_BANK 28
+#define PER_CK 28
+#define PLLSRC 29
+#define SYS_CK 30
+#define TRACEIN_CK 31
+
+/* ODF BANK */
+#define ODF_BANK 32
+#define PLL1_P 32
+#define PLL1_Q 33
+#define PLL1_R 34
+#define PLL2_P 35
+#define PLL2_Q 36
+#define PLL2_R 37
+#define PLL3_P 38
+#define PLL3_Q 39
+#define PLL3_R 40
+
+/* MCO BANK */
+#define MCO_BANK 41
+#define MCO1 41
+#define MCO2 42
+
+/* PERIF BANK */
+#define PERIF_BANK 50
+#define D1SRAM1_CK 50
+#define ITCM_CK 51
+#define DTCM2_CK 52
+#define DTCM1_CK 53
+#define FLITF_CK 54
+#define JPGDEC_CK 55
+#define DMA2D_CK 56
+#define MDMA_CK 57
+#define USB2ULPI_CK 58
+#define USB1ULPI_CK 59
+#define ETH1RX_CK 60
+#define ETH1TX_CK 61
+#define ETH1MAC_CK 62
+#define ART_CK 63
+#define DMA2_CK 64
+#define DMA1_CK 65
+#define D2SRAM3_CK 66
+#define D2SRAM2_CK 67
+#define D2SRAM1_CK 68
+#define HASH_CK 69
+#define CRYPT_CK 70
+#define CAMITF_CK 71
+#define BKPRAM_CK 72
+#define HSEM_CK 73
+#define BDMA_CK 74
+#define CRC_CK 75
+#define GPIOK_CK 76
+#define GPIOJ_CK 77
+#define GPIOI_CK 78
+#define GPIOH_CK 79
+#define GPIOG_CK 80
+#define GPIOF_CK 81
+#define GPIOE_CK 82
+#define GPIOD_CK 83
+#define GPIOC_CK 84
+#define GPIOB_CK 85
+#define GPIOA_CK 86
+#define WWDG1_CK 87
+#define DAC12_CK 88
+#define WWDG2_CK 89
+#define TIM14_CK 90
+#define TIM13_CK 91
+#define TIM12_CK 92
+#define TIM7_CK 93
+#define TIM6_CK 94
+#define TIM5_CK 95
+#define TIM4_CK 96
+#define TIM3_CK 97
+#define TIM2_CK 98
+#define MDIOS_CK 99
+#define OPAMP_CK 100
+#define CRS_CK 101
+#define TIM17_CK 102
+#define TIM16_CK 103
+#define TIM15_CK 104
+#define TIM8_CK 105
+#define TIM1_CK 106
+#define TMPSENS_CK 107
+#define RTCAPB_CK 108
+#define VREF_CK 109
+#define COMP12_CK 110
+#define SYSCFG_CK 111
+
+/* KERNEL BANK */
+#define KERN_BANK 120
+#define SDMMC1_CK 120
+#define QUADSPI_CK 121
+#define FMC_CK 122
+#define USB2OTG_CK 123
+#define USB1OTG_CK 124
+#define ADC12_CK 125
+#define SDMMC2_CK 126
+#define RNG_CK 127
+#define ADC3_CK 128
+#define DSI_CK 129
+#define LTDC_CK 130
+#define USART8_CK 131
+#define USART7_CK 132
+#define HDMICEC_CK 133
+#define I2C3_CK 134
+#define I2C2_CK 135
+#define I2C1_CK 136
+#define UART5_CK 137
+#define UART4_CK 138
+#define USART3_CK 139
+#define USART2_CK 140
+#define SPDIFRX_CK 141
+#define SPI3_CK 142
+#define SPI2_CK 143
+#define LPTIM1_CK 144
+#define FDCAN_CK 145
+#define SWP_CK 146
+#define HRTIM_CK 147
+#define DFSDM1_CK 148
+#define SAI3_CK 149
+#define SAI2_CK 150
+#define SAI1_CK 151
+#define SPI5_CK 152
+#define SPI4_CK 153
+#define SPI1_CK 154
+#define USART6_CK 155
+#define USART1_CK 156
+#define SAI4B_CK 157
+#define SAI4A_CK 158
+#define LPTIM5_CK 159
+#define LPTIM4_CK 160
+#define LPTIM3_CK 161
+#define LPTIM2_CK 162
+#define I2C4_CK 163
+#define SPI6_CK 164
+#define LPUART1_CK 165
+
+#define STM32H7_MAX_CLKS 166
diff --git a/include/dt-bindings/mfd/stm32h7-rcc.h b/include/dt-bindings/mfd/stm32h7-rcc.h
new file mode 100644
index 000000000000..461a8e04453a
--- /dev/null
+++ b/include/dt-bindings/mfd/stm32h7-rcc.h
@@ -0,0 +1,136 @@
+/*
+ * This header provides constants for the STM32H7 RCC IP
+ */
+
+#ifndef _DT_BINDINGS_MFD_STM32H7_RCC_H
+#define _DT_BINDINGS_MFD_STM32H7_RCC_H
+
+/* AHB3 */
+#define STM32H7_RCC_AHB3_MDMA		0
+#define STM32H7_RCC_AHB3_DMA2D		4
+#define STM32H7_RCC_AHB3_JPGDEC		5
+#define STM32H7_RCC_AHB3_FMC		12
+#define STM32H7_RCC_AHB3_QUADSPI	14
+#define STM32H7_RCC_AHB3_SDMMC1		16
+#define STM32H7_RCC_AHB3_CPU		31
+
+#define STM32H7_AHB3_RESET(bit) (STM32H7_RCC_AHB3_##bit + (0x7C * 8))
+
+/* AHB1 */
+#define STM32H7_RCC_AHB1_DMA1		0
+#define STM32H7_RCC_AHB1_DMA2		1
+#define STM32H7_RCC_AHB1_ADC12		5
+#define STM32H7_RCC_AHB1_ART		14
+#define STM32H7_RCC_AHB1_ETH1MAC	15
+#define STM32H7_RCC_AHB1_USB1OTG	25
+#define STM32H7_RCC_AHB1_USB2OTG	27
+
+#define STM32H7_AHB1_RESET(bit) (STM32H7_RCC_AHB1_##bit + (0x80 * 8))
+
+/* AHB2 */
+#define STM32H7_RCC_AHB2_CAMITF		0
+#define STM32H7_RCC_AHB2_CRYPT		4
+#define STM32H7_RCC_AHB2_HASH		5
+#define STM32H7_RCC_AHB2_RNG		6
+#define STM32H7_RCC_AHB2_SDMMC2		9
+
+#define STM32H7_AHB2_RESET(bit) (STM32H7_RCC_AHB2_##bit + (0x84 * 8))
+
+/* AHB4 */
+#define STM32H7_RCC_AHB4_GPIOA		0
+#define STM32H7_RCC_AHB4_GPIOB		1
+#define STM32H7_RCC_AHB4_GPIOC		2
+#define STM32H7_RCC_AHB4_GPIOD		3
+#define STM32H7_RCC_AHB4_GPIOE		4
+#define STM32H7_RCC_AHB4_GPIOF		5
+#define STM32H7_RCC_AHB4_GPIOG		6
+#define STM32H7_RCC_AHB4_GPIOH		7
+#define STM32H7_RCC_AHB4_GPIOI		8
+#define STM32H7_RCC_AHB4_GPIOJ		9
+#define STM32H7_RCC_AHB4_GPIOK		10
+#define STM32H7_RCC_AHB4_CRC		19
+#define STM32H7_RCC_AHB4_BDMA		21
+#define STM32H7_RCC_AHB4_ADC3		24
+#define STM32H7_RCC_AHB4_HSEM		25
+
+#define STM32H7_AHB4_RESET(bit) (STM32H7_RCC_AHB4_##bit + (0x88 * 8))
+
+/* APB3 */
+#define STM32H7_RCC_APB3_LTDC		3
+#define STM32H7_RCC_APB3_DSI		4
+
+#define STM32H7_APB3_RESET(bit) (STM32H7_RCC_APB3_##bit + (0x8C * 8))
+
+/* APB1L */
+#define STM32H7_RCC_APB1L_TIM2		0
+#define STM32H7_RCC_APB1L_TIM3		1
+#define STM32H7_RCC_APB1L_TIM4		2
+#define STM32H7_RCC_APB1L_TIM5		3
+#define STM32H7_RCC_APB1L_TIM6		4
+#define STM32H7_RCC_APB1L_TIM7		5
+#define STM32H7_RCC_APB1L_TIM12		6
+#define STM32H7_RCC_APB1L_TIM13		7
+#define STM32H7_RCC_APB1L_TIM14		8
+#define STM32H7_RCC_APB1L_LPTIM1	9
+#define STM32H7_RCC_APB1L_SPI2		14
+#define STM32H7_RCC_APB1L_SPI3		15
+#define STM32H7_RCC_APB1L_SPDIF_RX	16
+#define STM32H7_RCC_APB1L_USART2	17
+#define STM32H7_RCC_APB1L_USART3	18
+#define STM32H7_RCC_APB1L_UART4		19
+#define STM32H7_RCC_APB1L_UART5		20
+#define STM32H7_RCC_APB1L_I2C1		21
+#define STM32H7_RCC_APB1L_I2C2		22
+#define STM32H7_RCC_APB1L_I2C3		23
+#define STM32H7_RCC_APB1L_HDMICEC	27
+#define STM32H7_RCC_APB1L_DAC12		29
+#define STM32H7_RCC_APB1L_USART7	30
+#define STM32H7_RCC_APB1L_USART8	31
+
+#define STM32H7_APB1L_RESET(bit) (STM32H7_RCC_APB1L_##bit + (0x90 * 8))
+
+/* APB1H */
+#define STM32H7_RCC_APB1H_CRS		1
+#define STM32H7_RCC_APB1H_SWP		2
+#define STM32H7_RCC_APB1H_OPAMP		4
+#define STM32H7_RCC_APB1H_MDIOS		5
+#define STM32H7_RCC_APB1H_FDCAN		8
+
+#define STM32H7_APB1H_RESET(bit) (STM32H7_RCC_APB1H_##bit + (0x94 * 8))
+
+/* APB2 */
+#define STM32H7_RCC_APB2_TIM1		0
+#define STM32H7_RCC_APB2_TIM8		1
+#define STM32H7_RCC_APB2_USART1		4
+#define STM32H7_RCC_APB2_USART6		5
+#define STM32H7_RCC_APB2_SPI1		12
+#define STM32H7_RCC_APB2_SPI4		13
+#define STM32H7_RCC_APB2_TIM15		16
+#define STM32H7_RCC_APB2_TIM16		17
+#define STM32H7_RCC_APB2_TIM17		18
+#define STM32H7_RCC_APB2_SPI5		20
+#define STM32H7_RCC_APB2_SAI1		22
+#define STM32H7_RCC_APB2_SAI2		23
+#define STM32H7_RCC_APB2_SAI3		24
+#define STM32H7_RCC_APB2_DFSDM1		28
+#define STM32H7_RCC_APB2_HRTIM		29
+
+#define STM32H7_APB2_RESET(bit) (STM32H7_RCC_APB2_##bit + (0x98 * 8))
+
+/* APB4 */
+#define STM32H7_RCC_APB4_SYSCFG		1
+#define STM32H7_RCC_APB4_LPUART1	3
+#define STM32H7_RCC_APB4_SPI6		5
+#define STM32H7_RCC_APB4_I2C4		7
+#define STM32H7_RCC_APB4_LPTIM2		9
+#define STM32H7_RCC_APB4_LPTIM3		10
+#define STM32H7_RCC_APB4_LPTIM4		11
+#define STM32H7_RCC_APB4_LPTIM5		12
+#define STM32H7_RCC_APB4_COMP12		14
+#define STM32H7_RCC_APB4_VREF		15
+#define STM32H7_RCC_APB4_SAI4		21
+#define STM32H7_RCC_APB4_TMPSENS	26
+
+#define STM32H7_APB4_RESET(bit) (STM32H7_RCC_APB4_##bit + (0x9C * 8))
+
+#endif /* _DT_BINDINGS_MFD_STM32H7_RCC_H */
-- 
cgit v1.2.3


From e3dd205860a52347a858db58ace3d28998105da1 Mon Sep 17 00:00:00 2001
From: Katsuhiro Suzuki <suzuki.katsuhiro@socionext.com>
Date: Thu, 10 Aug 2017 16:23:45 +0900
Subject: clk: uniphier: add audio system clock

Add clock for audio subsystem (AIO) and SoC internal audio codec
(EVEA) on UniPhier LD11/LD20 SoCs.

Signed-off-by: Katsuhiro Suzuki <suzuki.katsuhiro@socionext.com>
Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
---
 drivers/clk/uniphier/clk-uniphier-sys.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/drivers/clk/uniphier/clk-uniphier-sys.c b/drivers/clk/uniphier/clk-uniphier-sys.c
index 44225702bb1f..52048696931d 100644
--- a/drivers/clk/uniphier/clk-uniphier-sys.c
+++ b/drivers/clk/uniphier/clk-uniphier-sys.c
@@ -57,6 +57,14 @@
 #define UNIPHIER_PRO4_SYS_CLK_USB3(idx, ch)				\
 	UNIPHIER_CLK_GATE("usb3" #ch, (idx), NULL, 0x2104, 16 + (ch))
 
+#define UNIPHIER_LD11_SYS_CLK_AIO(idx)					\
+	UNIPHIER_CLK_FACTOR("aio-io200m", -1, "spll", 1, 10),		\
+	UNIPHIER_CLK_GATE("aio", (idx), "aio-io200m", 0x2108, 0)
+
+#define UNIPHIER_LD11_SYS_CLK_EVEA(idx)					\
+	UNIPHIER_CLK_FACTOR("evea-io100m", -1, "spll", 1, 20),		\
+	UNIPHIER_CLK_GATE("evea", (idx), "evea-io100m", 0x2108, 1)
+
 #define UNIPHIER_PRO4_SYS_CLK_ETHER(idx)				\
 	UNIPHIER_CLK_GATE("ether", (idx), NULL, 0x2104, 12)
 
@@ -153,6 +161,8 @@ const struct uniphier_clk_data uniphier_ld11_sys_clk_data[] = {
 	UNIPHIER_LD11_SYS_CLK_ETHER(6),
 	UNIPHIER_LD11_SYS_CLK_STDMAC(8),			/* HSC, MIO */
 	UNIPHIER_CLK_FACTOR("usb2", -1, "ref", 24, 25),
+	UNIPHIER_LD11_SYS_CLK_AIO(40),
+	UNIPHIER_LD11_SYS_CLK_EVEA(41),
 	/* CPU gears */
 	UNIPHIER_CLK_DIV4("cpll", 2, 3, 4, 8),
 	UNIPHIER_CLK_DIV4("mpll", 2, 3, 4, 8),
@@ -190,6 +200,8 @@ const struct uniphier_clk_data uniphier_ld20_sys_clk_data[] = {
 	UNIPHIER_CLK_GATE("usb30", 14, NULL, 0x210c, 14),
 	UNIPHIER_CLK_GATE("usb30-phy0", 16, NULL, 0x210c, 12),
 	UNIPHIER_CLK_GATE("usb30-phy1", 17, NULL, 0x210c, 13),
+	UNIPHIER_LD11_SYS_CLK_AIO(40),
+	UNIPHIER_LD11_SYS_CLK_EVEA(41),
 	/* CPU gears */
 	UNIPHIER_CLK_DIV4("cpll", 2, 3, 4, 8),
 	UNIPHIER_CLK_DIV4("spll", 2, 3, 4, 8),
-- 
cgit v1.2.3


From 6c264416c9b3dfd860aba9bcbe0ab4e0f061c0ca Mon Sep 17 00:00:00 2001
From: Katsuhiro Suzuki <suzuki.katsuhiro@socionext.com>
Date: Thu, 10 Aug 2017 16:23:46 +0900
Subject: clk: uniphier: add video input subsystem clock

Add a clock for video input subsystem (EXIV) on
UniPhier LD11/LD20 SoCs.

Signed-off-by: Katsuhiro Suzuki <suzuki.katsuhiro@socionext.com>
Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
---
 drivers/clk/uniphier/clk-uniphier-sys.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/clk/uniphier/clk-uniphier-sys.c b/drivers/clk/uniphier/clk-uniphier-sys.c
index 52048696931d..0e396f3da526 100644
--- a/drivers/clk/uniphier/clk-uniphier-sys.c
+++ b/drivers/clk/uniphier/clk-uniphier-sys.c
@@ -65,6 +65,10 @@
 	UNIPHIER_CLK_FACTOR("evea-io100m", -1, "spll", 1, 20),		\
 	UNIPHIER_CLK_GATE("evea", (idx), "evea-io100m", 0x2108, 1)
 
+#define UNIPHIER_LD11_SYS_CLK_EXIV(idx)					\
+	UNIPHIER_CLK_FACTOR("exiv-io200m", -1, "spll", 1, 10),		\
+	UNIPHIER_CLK_GATE("exiv", (idx), "exiv-io200m", 0x2110, 2)
+
 #define UNIPHIER_PRO4_SYS_CLK_ETHER(idx)				\
 	UNIPHIER_CLK_GATE("ether", (idx), NULL, 0x2104, 12)
 
@@ -163,6 +167,7 @@ const struct uniphier_clk_data uniphier_ld11_sys_clk_data[] = {
 	UNIPHIER_CLK_FACTOR("usb2", -1, "ref", 24, 25),
 	UNIPHIER_LD11_SYS_CLK_AIO(40),
 	UNIPHIER_LD11_SYS_CLK_EVEA(41),
+	UNIPHIER_LD11_SYS_CLK_EXIV(42),
 	/* CPU gears */
 	UNIPHIER_CLK_DIV4("cpll", 2, 3, 4, 8),
 	UNIPHIER_CLK_DIV4("mpll", 2, 3, 4, 8),
@@ -202,6 +207,7 @@ const struct uniphier_clk_data uniphier_ld20_sys_clk_data[] = {
 	UNIPHIER_CLK_GATE("usb30-phy1", 17, NULL, 0x210c, 13),
 	UNIPHIER_LD11_SYS_CLK_AIO(40),
 	UNIPHIER_LD11_SYS_CLK_EVEA(41),
+	UNIPHIER_LD11_SYS_CLK_EXIV(42),
 	/* CPU gears */
 	UNIPHIER_CLK_DIV4("cpll", 2, 3, 4, 8),
 	UNIPHIER_CLK_DIV4("spll", 2, 3, 4, 8),
-- 
cgit v1.2.3


From 2316a7a33408b6e7b24e9d2a9a7c24af9a012289 Mon Sep 17 00:00:00 2001
From: Alex Frid <afrid@nvidia.com>
Date: Tue, 25 Jul 2017 13:18:40 +0300
Subject: clk: Don't write error code into divider register

Add a check for error returned by divider value calculation to avoid
writing error code into hw register.

Signed-off-by: Alex Frid <afrid@nvidia.com>
Reviewed-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Reviewed-by: Jon Mayo <jmayo@nvidia.com>
Fixes: bca9690b9426 ("clk: divider: Make generic for usage elsewhere")
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
---
 drivers/clk/clk-divider.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/clk/clk-divider.c b/drivers/clk/clk-divider.c
index 9bb472cccca6..4ed516cb7276 100644
--- a/drivers/clk/clk-divider.c
+++ b/drivers/clk/clk-divider.c
@@ -385,12 +385,14 @@ static int clk_divider_set_rate(struct clk_hw *hw, unsigned long rate,
 				unsigned long parent_rate)
 {
 	struct clk_divider *divider = to_clk_divider(hw);
-	unsigned int value;
+	int value;
 	unsigned long flags = 0;
 	u32 val;
 
 	value = divider_get_val(rate, parent_rate, divider->table,
 				divider->width, divider->flags);
+	if (value < 0)
+		return value;
 
 	if (divider->lock)
 		spin_lock_irqsave(divider->lock, flags);
@@ -403,7 +405,7 @@ static int clk_divider_set_rate(struct clk_hw *hw, unsigned long rate,
 		val = clk_readl(divider->reg);
 		val &= ~(div_mask(divider->width) << divider->shift);
 	}
-	val |= value << divider->shift;
+	val |= (u32)value << divider->shift;
 	clk_writel(val, divider->reg);
 
 	if (divider->lock)
-- 
cgit v1.2.3


From df2f84516758788889281e97d736c7863ff200ea Mon Sep 17 00:00:00 2001
From: Colin Ian King <colin.king@canonical.com>
Date: Thu, 27 Jul 2017 00:56:27 +0100
Subject: clk: ti: check for null return in strrchr to avoid null dereferencing

strrchr can potentially return a null so the following strlen on the
null pointer can cause a null dereference. Add a check to see if
the string postfix is not null before calling strlen.

Detected by CoverityScan, CID#1452039 ("Dereference null return")

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
---
 drivers/clk/ti/adpll.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/clk/ti/adpll.c b/drivers/clk/ti/adpll.c
index d5c6db446316..d6036c788fab 100644
--- a/drivers/clk/ti/adpll.c
+++ b/drivers/clk/ti/adpll.c
@@ -222,7 +222,7 @@ static int ti_adpll_setup_clock(struct ti_adpll_data *d, struct clk *clock,
 
 	/* Separate con_id in format "pll040dcoclkldo" to fit MAX_CON_ID */
 	postfix = strrchr(name, '.');
-	if (strlen(postfix) > 1) {
+	if (postfix && strlen(postfix) > 1) {
 		if (strlen(postfix) > ADPLL_MAX_CON_ID)
 			dev_warn(d->dev, "clock %s con_id lookup may fail\n",
 				 name);
-- 
cgit v1.2.3


From 8bb48f79ea70875be1b4c5d5167a43cc6513d6e1 Mon Sep 17 00:00:00 2001
From: Andreas Färber <afaerber@suse.de>
Date: Fri, 25 Aug 2017 00:52:36 +0200
Subject: clk: mb86s7x: Drop non-building driver
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

It fails to build once we introduce the ARCH_MB86S7X Kconfig symbol:

  drivers/clk/clk-mb86s7x.c:27:10: fatal error: soc/mb86s7x/scb_mhu.h: No such file or directory
   #include <soc/mb86s7x/scb_mhu.h>
            ^~~~~~~~~~~~~~~~~~~~~~~
  compilation terminated.

And when commenting out that line, we get:

  drivers/clk/clk-mb86s7x.c: In function 'crg_gate_control':
  drivers/clk/clk-mb86s7x.c:72:8: error: implicit declaration of function 'mb86s7x_send_packet' [-Werror=implicit-function-declaration]
    ret = mb86s7x_send_packet(CMD_PERI_CLOCK_GATE_SET_REQ,
          ^~~~~~~~~~~~~~~~~~~
  drivers/clk/clk-mb86s7x.c:72:28: error: 'CMD_PERI_CLOCK_GATE_SET_REQ' undeclared (first use in this function)
    ret = mb86s7x_send_packet(CMD_PERI_CLOCK_GATE_SET_REQ,
                              ^~~~~~~~~~~~~~~~~~~~~~~~~~~
  drivers/clk/clk-mb86s7x.c:72:28: note: each undeclared identifier is reported only once for each function it appears in
  drivers/clk/clk-mb86s7x.c: In function 'crg_rate_control':
  drivers/clk/clk-mb86s7x.c:116:10: error: 'CMD_PERI_CLOCK_RATE_SET_REQ' undeclared (first use in this function)
     code = CMD_PERI_CLOCK_RATE_SET_REQ;
            ^~~~~~~~~~~~~~~~~~~~~~~~~~~
  drivers/clk/clk-mb86s7x.c:121:10: error: 'CMD_PERI_CLOCK_RATE_GET_REQ' undeclared (first use in this function); did you mean 'CMD_PERI_CLOCK_RATE_SET_REQ'?
     code = CMD_PERI_CLOCK_RATE_GET_REQ;
            ^~~~~~~~~~~~~~~~~~~~~~~~~~~
            CMD_PERI_CLOCK_RATE_SET_REQ
  drivers/clk/clk-mb86s7x.c: In function 'mhu_cluster_rate':
  drivers/clk/clk-mb86s7x.c:276:10: error: 'CMD_CPU_CLOCK_RATE_GET_REQ' undeclared (first use in this function)
     code = CMD_CPU_CLOCK_RATE_GET_REQ;
            ^~~~~~~~~~~~~~~~~~~~~~~~~~
  drivers/clk/clk-mb86s7x.c:278:10: error: 'CMD_CPU_CLOCK_RATE_SET_REQ' undeclared (first use in this function); did you mean 'CMD_CPU_CLOCK_RATE_GET_REQ'?
     code = CMD_CPU_CLOCK_RATE_SET_REQ;
            ^~~~~~~~~~~~~~~~~~~~~~~~~~
            CMD_CPU_CLOCK_RATE_GET_REQ
  cc1: some warnings being treated as errors
  scripts/Makefile.build:302: recipe for target
  'drivers/clk/clk-mb86s7x.o' failed
  make[2]: *** [drivers/clk/clk-mb86s7x.o] Error 1

Remove the driver for now.

Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
---
 drivers/clk/Makefile      |   1 -
 drivers/clk/clk-mb86s7x.c | 390 ----------------------------------------------
 2 files changed, 391 deletions(-)
 delete mode 100644 drivers/clk/clk-mb86s7x.c

diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index f87d085805a9..c99f363826f0 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -29,7 +29,6 @@ obj-$(CONFIG_COMMON_CLK_GEMINI)		+= clk-gemini.o
 obj-$(CONFIG_ARCH_HIGHBANK)		+= clk-highbank.o
 obj-$(CONFIG_CLK_HSDK)			+= clk-hsdk-pll.o
 obj-$(CONFIG_COMMON_CLK_MAX77686)	+= clk-max77686.o
-obj-$(CONFIG_ARCH_MB86S7X)		+= clk-mb86s7x.o
 obj-$(CONFIG_ARCH_MOXART)		+= clk-moxart.o
 obj-$(CONFIG_ARCH_NOMADIK)		+= clk-nomadik.o
 obj-$(CONFIG_ARCH_NSPIRE)		+= clk-nspire.o
diff --git a/drivers/clk/clk-mb86s7x.c b/drivers/clk/clk-mb86s7x.c
deleted file mode 100644
index 2a83a3ff1d09..000000000000
--- a/drivers/clk/clk-mb86s7x.c
+++ /dev/null
@@ -1,390 +0,0 @@
-/*
- * Copyright (C) 2013-2015 FUJITSU SEMICONDUCTOR LIMITED
- * Copyright (C) 2015 Linaro Ltd.
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/clkdev.h>
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/of.h>
-#include <linux/cpu.h>
-#include <linux/clk-provider.h>
-#include <linux/spinlock.h>
-#include <linux/module.h>
-#include <linux/topology.h>
-#include <linux/mailbox_client.h>
-#include <linux/platform_device.h>
-
-#include <soc/mb86s7x/scb_mhu.h>
-
-#define to_crg_clk(p) container_of(p, struct crg_clk, hw)
-#define to_clc_clk(p) container_of(p, struct cl_clk, hw)
-
-struct mb86s7x_peri_clk {
-	u32 payload_size;
-	u32 cntrlr;
-	u32 domain;
-	u32 port;
-	u32 en;
-	u64 frequency;
-} __packed __aligned(4);
-
-struct hack_rate {
-	unsigned clk_id;
-	unsigned long rate;
-	int gated;
-};
-
-struct crg_clk {
-	struct clk_hw hw;
-	u8 cntrlr, domain, port;
-};
-
-static int crg_gate_control(struct clk_hw *hw, int en)
-{
-	struct crg_clk *crgclk = to_crg_clk(hw);
-	struct mb86s7x_peri_clk cmd;
-	int ret;
-
-	cmd.payload_size = sizeof(cmd);
-	cmd.cntrlr = crgclk->cntrlr;
-	cmd.domain = crgclk->domain;
-	cmd.port = crgclk->port;
-	cmd.en = en;
-
-	/* Port is UngatedCLK */
-	if (cmd.port == 8)
-		return en ? 0 : -EINVAL;
-
-	pr_debug("%s:%d CMD Cntrlr-%u Dom-%u Port-%u En-%u}\n",
-		 __func__, __LINE__, cmd.cntrlr,
-		 cmd.domain, cmd.port, cmd.en);
-
-	ret = mb86s7x_send_packet(CMD_PERI_CLOCK_GATE_SET_REQ,
-				  &cmd, sizeof(cmd));
-	if (ret < 0) {
-		pr_err("%s:%d failed!\n", __func__, __LINE__);
-		return ret;
-	}
-
-	pr_debug("%s:%d REP Cntrlr-%u Dom-%u Port-%u En-%u}\n",
-		 __func__, __LINE__, cmd.cntrlr,
-		 cmd.domain, cmd.port, cmd.en);
-
-	/* If the request was rejected */
-	if (cmd.en != en)
-		ret = -EINVAL;
-	else
-		ret = 0;
-
-	return ret;
-}
-
-static int crg_port_prepare(struct clk_hw *hw)
-{
-	return crg_gate_control(hw, 1);
-}
-
-static void crg_port_unprepare(struct clk_hw *hw)
-{
-	crg_gate_control(hw, 0);
-}
-
-static int
-crg_rate_control(struct clk_hw *hw, int set, unsigned long *rate)
-{
-	struct crg_clk *crgclk = to_crg_clk(hw);
-	struct mb86s7x_peri_clk cmd;
-	int code, ret;
-
-	cmd.payload_size = sizeof(cmd);
-	cmd.cntrlr = crgclk->cntrlr;
-	cmd.domain = crgclk->domain;
-	cmd.port = crgclk->port;
-	cmd.frequency = *rate;
-
-	if (set) {
-		code = CMD_PERI_CLOCK_RATE_SET_REQ;
-		pr_debug("%s:%d CMD Cntrlr-%u Dom-%u Port-%u Rate-SET %lluHz}\n",
-			 __func__, __LINE__, cmd.cntrlr,
-			 cmd.domain, cmd.port, cmd.frequency);
-	} else {
-		code = CMD_PERI_CLOCK_RATE_GET_REQ;
-		pr_debug("%s:%d CMD Cntrlr-%u Dom-%u Port-%u Rate-GET}\n",
-			 __func__, __LINE__, cmd.cntrlr,
-			 cmd.domain, cmd.port);
-	}
-
-	ret = mb86s7x_send_packet(code, &cmd, sizeof(cmd));
-	if (ret < 0) {
-		pr_err("%s:%d failed!\n", __func__, __LINE__);
-		return ret;
-	}
-
-	if (set)
-		pr_debug("%s:%d REP Cntrlr-%u Dom-%u Port-%u Rate-SET %lluHz}\n",
-			 __func__, __LINE__, cmd.cntrlr,
-			 cmd.domain, cmd.port, cmd.frequency);
-	else
-		pr_debug("%s:%d REP Cntrlr-%u Dom-%u Port-%u Rate-GOT %lluHz}\n",
-			 __func__, __LINE__, cmd.cntrlr,
-			 cmd.domain, cmd.port, cmd.frequency);
-
-	*rate = cmd.frequency;
-	return 0;
-}
-
-static unsigned long
-crg_port_recalc_rate(struct clk_hw *hw,	unsigned long parent_rate)
-{
-	unsigned long rate;
-
-	crg_rate_control(hw, 0, &rate);
-
-	return rate;
-}
-
-static long
-crg_port_round_rate(struct clk_hw *hw,
-		    unsigned long rate, unsigned long *pr)
-{
-	return rate;
-}
-
-static int
-crg_port_set_rate(struct clk_hw *hw,
-		  unsigned long rate, unsigned long parent_rate)
-{
-	return crg_rate_control(hw, 1, &rate);
-}
-
-const struct clk_ops crg_port_ops = {
-	.prepare = crg_port_prepare,
-	.unprepare = crg_port_unprepare,
-	.recalc_rate = crg_port_recalc_rate,
-	.round_rate = crg_port_round_rate,
-	.set_rate = crg_port_set_rate,
-};
-
-struct mb86s70_crg11 {
-	struct mutex lock; /* protects CLK populating and searching */
-};
-
-static struct clk *crg11_get(struct of_phandle_args *clkspec, void *data)
-{
-	struct mb86s70_crg11 *crg11 = data;
-	struct clk_init_data init;
-	u32 cntrlr, domain, port;
-	struct crg_clk *crgclk;
-	struct clk *clk;
-	char clkp[20];
-
-	if (clkspec->args_count != 3)
-		return ERR_PTR(-EINVAL);
-
-	cntrlr = clkspec->args[0];
-	domain = clkspec->args[1];
-	port = clkspec->args[2];
-
-	if (port > 7)
-		snprintf(clkp, 20, "UngatedCLK%d_%X", cntrlr, domain);
-	else
-		snprintf(clkp, 20, "CLK%d_%X_%d", cntrlr, domain, port);
-
-	mutex_lock(&crg11->lock);
-
-	clk = __clk_lookup(clkp);
-	if (clk) {
-		mutex_unlock(&crg11->lock);
-		return clk;
-	}
-
-	crgclk = kzalloc(sizeof(*crgclk), GFP_KERNEL);
-	if (!crgclk) {
-		mutex_unlock(&crg11->lock);
-		return ERR_PTR(-ENOMEM);
-	}
-
-	init.name = clkp;
-	init.num_parents = 0;
-	init.ops = &crg_port_ops;
-	init.flags = 0;
-	crgclk->hw.init = &init;
-	crgclk->cntrlr = cntrlr;
-	crgclk->domain = domain;
-	crgclk->port = port;
-	clk = clk_register(NULL, &crgclk->hw);
-	if (IS_ERR(clk))
-		pr_err("%s:%d Error!\n", __func__, __LINE__);
-	else
-		pr_debug("Registered %s\n", clkp);
-
-	clk_register_clkdev(clk, clkp, NULL);
-	mutex_unlock(&crg11->lock);
-	return clk;
-}
-
-static void __init crg_port_init(struct device_node *node)
-{
-	struct mb86s70_crg11 *crg11;
-
-	crg11 = kzalloc(sizeof(*crg11), GFP_KERNEL);
-	if (!crg11)
-		return;
-
-	mutex_init(&crg11->lock);
-
-	of_clk_add_provider(node, crg11_get, crg11);
-}
-CLK_OF_DECLARE(crg11_gate, "fujitsu,mb86s70-crg11", crg_port_init);
-
-struct cl_clk {
-	struct clk_hw hw;
-	int cluster;
-};
-
-struct mb86s7x_cpu_freq {
-	u32 payload_size;
-	u32 cluster_class;
-	u32 cluster_id;
-	u32 cpu_id;
-	u64 frequency;
-};
-
-static void mhu_cluster_rate(struct clk_hw *hw, unsigned long *rate, int get)
-{
-	struct cl_clk *clc = to_clc_clk(hw);
-	struct mb86s7x_cpu_freq cmd;
-	int code, ret;
-
-	cmd.payload_size = sizeof(cmd);
-	cmd.cluster_class = 0;
-	cmd.cluster_id = clc->cluster;
-	cmd.cpu_id = 0;
-	cmd.frequency = *rate;
-
-	if (get)
-		code = CMD_CPU_CLOCK_RATE_GET_REQ;
-	else
-		code = CMD_CPU_CLOCK_RATE_SET_REQ;
-
-	pr_debug("%s:%d CMD Cl_Class-%u CL_ID-%u CPU_ID-%u Freq-%llu}\n",
-		 __func__, __LINE__, cmd.cluster_class,
-		 cmd.cluster_id, cmd.cpu_id, cmd.frequency);
-
-	ret = mb86s7x_send_packet(code, &cmd, sizeof(cmd));
-	if (ret < 0) {
-		pr_err("%s:%d failed!\n", __func__, __LINE__);
-		return;
-	}
-
-	pr_debug("%s:%d REP Cl_Class-%u CL_ID-%u CPU_ID-%u Freq-%llu}\n",
-		 __func__, __LINE__, cmd.cluster_class,
-		 cmd.cluster_id, cmd.cpu_id, cmd.frequency);
-
-	*rate = cmd.frequency;
-}
-
-static unsigned long
-clc_recalc_rate(struct clk_hw *hw, unsigned long unused)
-{
-	unsigned long rate;
-
-	mhu_cluster_rate(hw, &rate, 1);
-	return rate;
-}
-
-static long
-clc_round_rate(struct clk_hw *hw, unsigned long rate,
-	       unsigned long *unused)
-{
-	return rate;
-}
-
-static int
-clc_set_rate(struct clk_hw *hw, unsigned long rate,
-	     unsigned long unused)
-{
-	unsigned long res = rate;
-
-	mhu_cluster_rate(hw, &res, 0);
-
-	return (res == rate) ? 0 : -EINVAL;
-}
-
-static struct clk_ops clk_clc_ops = {
-	.recalc_rate = clc_recalc_rate,
-	.round_rate = clc_round_rate,
-	.set_rate = clc_set_rate,
-};
-
-static struct clk_hw *mb86s7x_clclk_register(struct device *cpu_dev)
-{
-	struct clk_init_data init;
-	struct cl_clk *clc;
-	int ret;
-
-	clc = kzalloc(sizeof(*clc), GFP_KERNEL);
-	if (!clc)
-		return ERR_PTR(-ENOMEM);
-
-	clc->hw.init = &init;
-	clc->cluster = topology_physical_package_id(cpu_dev->id);
-
-	init.name = dev_name(cpu_dev);
-	init.ops = &clk_clc_ops;
-	init.flags = CLK_GET_RATE_NOCACHE;
-	init.num_parents = 0;
-
-	ret = devm_clk_hw_register(cpu_dev, &clc->hw);
-	if (ret)
-		return ERR_PTR(ret);
-	return &clc->hw;
-}
-
-static int mb86s7x_clclk_of_init(void)
-{
-	int cpu, ret = -ENODEV;
-	struct device_node *np;
-	struct clk_hw *hw;
-
-	np = of_find_compatible_node(NULL, NULL, "fujitsu,mb86s70-scb-1.0");
-	if (!np || !of_device_is_available(np))
-		goto exit;
-
-	for_each_possible_cpu(cpu) {
-		struct device *cpu_dev = get_cpu_device(cpu);
-
-		if (!cpu_dev) {
-			pr_err("failed to get cpu%d device\n", cpu);
-			continue;
-		}
-
-		hw = mb86s7x_clclk_register(cpu_dev);
-		if (IS_ERR(hw)) {
-			pr_err("failed to register cpu%d clock\n", cpu);
-			continue;
-		}
-		if (clk_hw_register_clkdev(hw, NULL, dev_name(cpu_dev))) {
-			pr_err("failed to register cpu%d clock lookup\n", cpu);
-			continue;
-		}
-		pr_debug("registered clk for %s\n", dev_name(cpu_dev));
-	}
-	ret = 0;
-
-	platform_device_register_simple("arm-bL-cpufreq-dt", -1, NULL, 0);
-exit:
-	of_node_put(np);
-	return ret;
-}
-module_init(mb86s7x_clclk_of_init);
-- 
cgit v1.2.3


From 8c7aa63289470ba42c3a34e37bdc574308d024bd Mon Sep 17 00:00:00 2001
From: Quentin Schulz <quentin.schulz@free-electrons.com>
Date: Thu, 10 Aug 2017 08:34:01 +0200
Subject: clk: at91: clk-generated: remove useless divisor loop

The driver requests the current clk rate of each of its parent clocks to
decide whether a clock rate is suitable or not. It does not request
determine_rate from a parent clock which could request a rate change in
parent clock (i.e. there is no parent rate propagation).

We know the rate we want (passed along req argument of the function) and
the parent clock rate, thus we know the closest rounded divisor, we
don't need to iterate over the available divisors to find the best one
for a given clock.

Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
---
 drivers/clk/at91/clk-generated.c | 25 ++++++++++++-------------
 1 file changed, 12 insertions(+), 13 deletions(-)

diff --git a/drivers/clk/at91/clk-generated.c b/drivers/clk/at91/clk-generated.c
index f0b7ae904ce2..ef4b4e03de04 100644
--- a/drivers/clk/at91/clk-generated.c
+++ b/drivers/clk/at91/clk-generated.c
@@ -124,19 +124,18 @@ static int clk_generated_determine_rate(struct clk_hw *hw,
 		    (gck->range.max && min_rate > gck->range.max))
 			continue;
 
-		for (div = 1; div < GENERATED_MAX_DIV + 2; div++) {
-			tmp_rate = DIV_ROUND_CLOSEST(parent_rate, div);
-			tmp_diff = abs(req->rate - tmp_rate);
-
-			if (best_diff < 0 || best_diff > tmp_diff) {
-				best_rate = tmp_rate;
-				best_diff = tmp_diff;
-				req->best_parent_rate = parent_rate;
-				req->best_parent_hw = parent;
-			}
-
-			if (!best_diff || tmp_rate < req->rate)
-				break;
+		div = DIV_ROUND_CLOSEST(parent_rate, req->rate);
+		if (!div)
+			tmp_rate = parent_rate;
+		else
+			tmp_rate = parent_rate / div;
+		tmp_diff = abs(req->rate - tmp_rate);
+
+		if (best_diff < 0 || best_diff > tmp_diff) {
+			best_rate = tmp_rate;
+			best_diff = tmp_diff;
+			req->best_parent_rate = parent_rate;
+			req->best_parent_hw = parent;
 		}
 
 		if (!best_diff)
-- 
cgit v1.2.3


From 33202fa32d2f04f613ef748baebfa734013fdbbf Mon Sep 17 00:00:00 2001
From: Quentin Schulz <quentin.schulz@free-electrons.com>
Date: Thu, 10 Aug 2017 08:34:02 +0200
Subject: dt-bindings: clk: at91: add audio plls to the compatible list

This new clock driver set allows to have a fractional divided clock that
would generate a precise clock particularly suitable for audio
applications.

The main audio pll clock has two children clocks: one that is connected
to the PMC, the other that can directly drive a pad. As these two routes
have different enable bits and different dividers and divider formulas,
they are handled by two different drivers.

This adds the audio plls (frac, pad and pmc) to the compatible list of
at91 clocks in DT binding.

Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
---
 Documentation/devicetree/bindings/clock/at91-clock.txt | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/Documentation/devicetree/bindings/clock/at91-clock.txt b/Documentation/devicetree/bindings/clock/at91-clock.txt
index 5f3ad65daf69..51c259a92d02 100644
--- a/Documentation/devicetree/bindings/clock/at91-clock.txt
+++ b/Documentation/devicetree/bindings/clock/at91-clock.txt
@@ -81,6 +81,16 @@ Required properties:
 	"atmel,sama5d2-clk-generated":
 		at91 generated clock
 
+	"atmel,sama5d2-clk-audio-pll-frac":
+		at91 audio fractional pll
+
+	"atmel,sama5d2-clk-audio-pll-pad":
+		at91 audio pll CLK_AUDIO output pin
+
+	"atmel,sama5d2-clk-audio-pll-pmc"
+		at91 audio pll output on AUDIOPLLCLK that feeds the PMC
+		and can be used by peripheral clock or generic clock
+
 Required properties for SCKC node:
 - reg : defines the IO memory reserved for the SCKC.
 - #size-cells : shall be 0 (reg is used to encode clk id).
-- 
cgit v1.2.3


From 0865805d82d4c822647ee35ab2629c48cc40706b Mon Sep 17 00:00:00 2001
From: Quentin Schulz <quentin.schulz@free-electrons.com>
Date: Thu, 10 Aug 2017 08:34:03 +0200
Subject: clk: at91: add audio pll clock drivers

This new clock driver set allows to have a fractional divided clock that
would generate a precise clock particularly suitable for audio
applications.

The main audio pll clock has two children clocks: one that is connected
to the PMC, the other that can directly drive a pad. As these two routes
have different enable bits and different dividers and divider formulas,
they are handled by two different drivers. Each of them could modify the
rate of the main audio pll parent.

The main audio pll clock can output 620MHz to 700MHz.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
---
 arch/arm/mach-at91/Kconfig       |   4 +
 drivers/clk/at91/Makefile        |   1 +
 drivers/clk/at91/clk-audio-pll.c | 536 +++++++++++++++++++++++++++++++++++++++
 include/linux/clk/at91_pmc.h     |  25 ++
 4 files changed, 566 insertions(+)
 create mode 100644 drivers/clk/at91/clk-audio-pll.c

diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index d735e5fc4772..9ae14d59a9ce 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -26,6 +26,7 @@ config SOC_SAMA5D2
 	select HAVE_AT91_USB_CLK
 	select HAVE_AT91_H32MX
 	select HAVE_AT91_GENERATED_CLK
+	select HAVE_AT91_AUDIO_PLL
 	select PINCTRL_AT91PIO4
 	help
 	  Select this if ou are using one of Atmel's SAMA5D2 family SoC.
@@ -125,6 +126,9 @@ config HAVE_AT91_H32MX
 config HAVE_AT91_GENERATED_CLK
 	bool
 
+config HAVE_AT91_AUDIO_PLL
+	bool
+
 config SOC_SAM_V4_V5
 	bool
 
diff --git a/drivers/clk/at91/Makefile b/drivers/clk/at91/Makefile
index 13e67bd35cff..c68947b65a4c 100644
--- a/drivers/clk/at91/Makefile
+++ b/drivers/clk/at91/Makefile
@@ -6,6 +6,7 @@ obj-y += pmc.o sckc.o
 obj-y += clk-slow.o clk-main.o clk-pll.o clk-plldiv.o clk-master.o
 obj-y += clk-system.o clk-peripheral.o clk-programmable.o
 
+obj-$(CONFIG_HAVE_AT91_AUDIO_PLL)	+= clk-audio-pll.o
 obj-$(CONFIG_HAVE_AT91_UTMI)		+= clk-utmi.o
 obj-$(CONFIG_HAVE_AT91_USB_CLK)		+= clk-usb.o
 obj-$(CONFIG_HAVE_AT91_SMD)		+= clk-smd.o
diff --git a/drivers/clk/at91/clk-audio-pll.c b/drivers/clk/at91/clk-audio-pll.c
new file mode 100644
index 000000000000..da7bafcfbe70
--- /dev/null
+++ b/drivers/clk/at91/clk-audio-pll.c
@@ -0,0 +1,536 @@
+/*
+ *  Copyright (C) 2016 Atmel Corporation,
+ *		       Songjun Wu <songjun.wu@atmel.com>,
+ *                     Nicolas Ferre <nicolas.ferre@atmel.com>
+ *  Copyright (C) 2017 Free Electrons,
+ *		       Quentin Schulz <quentin.schulz@free-electrons.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * The Sama5d2 SoC has two audio PLLs (PMC and PAD) that shares the same parent
+ * (FRAC). FRAC can output between 620 and 700MHz and only multiply the rate of
+ * its own parent. PMC and PAD can then divide the FRAC rate to best match the
+ * asked rate.
+ *
+ * Traits of FRAC clock:
+ * enable - clk_enable writes nd, fracr parameters and enables PLL
+ * rate - rate is adjustable.
+ *        clk->rate = parent->rate * ((nd + 1) + (fracr / 2^22))
+ * parent - fixed parent.  No clk_set_parent support
+ *
+ * Traits of PMC clock:
+ * enable - clk_enable writes qdpmc, and enables PMC output
+ * rate - rate is adjustable.
+ *        clk->rate = parent->rate / (qdpmc + 1)
+ * parent - fixed parent.  No clk_set_parent support
+ *
+ * Traits of PAD clock:
+ * enable - clk_enable writes divisors and enables PAD output
+ * rate - rate is adjustable.
+ *        clk->rate = parent->rate / (qdaudio * div))
+ * parent - fixed parent.  No clk_set_parent support
+ *
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/clk/at91_pmc.h>
+#include <linux/of.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+
+#define AUDIO_PLL_DIV_FRAC	BIT(22)
+#define AUDIO_PLL_ND_MAX	(AT91_PMC_AUDIO_PLL_ND_MASK >> \
+					AT91_PMC_AUDIO_PLL_ND_OFFSET)
+
+#define AUDIO_PLL_QDPAD(qd, div)	((AT91_PMC_AUDIO_PLL_QDPAD_EXTDIV(qd) & \
+					  AT91_PMC_AUDIO_PLL_QDPAD_EXTDIV_MASK) | \
+					 (AT91_PMC_AUDIO_PLL_QDPAD_DIV(div) & \
+					  AT91_PMC_AUDIO_PLL_QDPAD_DIV_MASK))
+
+#define AUDIO_PLL_QDPMC_MAX		(AT91_PMC_AUDIO_PLL_QDPMC_MASK >> \
+						AT91_PMC_AUDIO_PLL_QDPMC_OFFSET)
+
+#define AUDIO_PLL_FOUT_MIN	620000000UL
+#define AUDIO_PLL_FOUT_MAX	700000000UL
+
+struct clk_audio_frac {
+	struct clk_hw hw;
+	struct regmap *regmap;
+	u32 fracr;
+	u8 nd;
+};
+
+struct clk_audio_pad {
+	struct clk_hw hw;
+	struct regmap *regmap;
+	u8 qdaudio;
+	u8 div;
+};
+
+struct clk_audio_pmc {
+	struct clk_hw hw;
+	struct regmap *regmap;
+	u8 qdpmc;
+};
+
+#define to_clk_audio_frac(hw) container_of(hw, struct clk_audio_frac, hw)
+#define to_clk_audio_pad(hw) container_of(hw, struct clk_audio_pad, hw)
+#define to_clk_audio_pmc(hw) container_of(hw, struct clk_audio_pmc, hw)
+
+static int clk_audio_pll_frac_enable(struct clk_hw *hw)
+{
+	struct clk_audio_frac *frac = to_clk_audio_frac(hw);
+
+	regmap_update_bits(frac->regmap, AT91_PMC_AUDIO_PLL0,
+			   AT91_PMC_AUDIO_PLL_RESETN, 0);
+	regmap_update_bits(frac->regmap, AT91_PMC_AUDIO_PLL0,
+			   AT91_PMC_AUDIO_PLL_RESETN,
+			   AT91_PMC_AUDIO_PLL_RESETN);
+	regmap_update_bits(frac->regmap, AT91_PMC_AUDIO_PLL1,
+			   AT91_PMC_AUDIO_PLL_FRACR_MASK, frac->fracr);
+
+	/*
+	 * reset and enable have to be done in 2 separated writes
+	 * for AT91_PMC_AUDIO_PLL0
+	 */
+	regmap_update_bits(frac->regmap, AT91_PMC_AUDIO_PLL0,
+			   AT91_PMC_AUDIO_PLL_PLLEN |
+			   AT91_PMC_AUDIO_PLL_ND_MASK,
+			   AT91_PMC_AUDIO_PLL_PLLEN |
+			   AT91_PMC_AUDIO_PLL_ND(frac->nd));
+
+	return 0;
+}
+
+static int clk_audio_pll_pad_enable(struct clk_hw *hw)
+{
+	struct clk_audio_pad *apad_ck = to_clk_audio_pad(hw);
+
+	regmap_update_bits(apad_ck->regmap, AT91_PMC_AUDIO_PLL1,
+			   AT91_PMC_AUDIO_PLL_QDPAD_MASK,
+			   AUDIO_PLL_QDPAD(apad_ck->qdaudio, apad_ck->div));
+	regmap_update_bits(apad_ck->regmap, AT91_PMC_AUDIO_PLL0,
+			   AT91_PMC_AUDIO_PLL_PADEN, AT91_PMC_AUDIO_PLL_PADEN);
+
+	return 0;
+}
+
+static int clk_audio_pll_pmc_enable(struct clk_hw *hw)
+{
+	struct clk_audio_pmc *apmc_ck = to_clk_audio_pmc(hw);
+
+	regmap_update_bits(apmc_ck->regmap, AT91_PMC_AUDIO_PLL0,
+			   AT91_PMC_AUDIO_PLL_PMCEN |
+			   AT91_PMC_AUDIO_PLL_QDPMC_MASK,
+			   AT91_PMC_AUDIO_PLL_PMCEN |
+			   AT91_PMC_AUDIO_PLL_QDPMC(apmc_ck->qdpmc));
+	return 0;
+}
+
+static void clk_audio_pll_frac_disable(struct clk_hw *hw)
+{
+	struct clk_audio_frac *frac = to_clk_audio_frac(hw);
+
+	regmap_update_bits(frac->regmap, AT91_PMC_AUDIO_PLL0,
+			   AT91_PMC_AUDIO_PLL_PLLEN, 0);
+	/* do it in 2 separated writes */
+	regmap_update_bits(frac->regmap, AT91_PMC_AUDIO_PLL0,
+			   AT91_PMC_AUDIO_PLL_RESETN, 0);
+}
+
+static void clk_audio_pll_pad_disable(struct clk_hw *hw)
+{
+	struct clk_audio_pad *apad_ck = to_clk_audio_pad(hw);
+
+	regmap_update_bits(apad_ck->regmap, AT91_PMC_AUDIO_PLL0,
+			   AT91_PMC_AUDIO_PLL_PADEN, 0);
+}
+
+static void clk_audio_pll_pmc_disable(struct clk_hw *hw)
+{
+	struct clk_audio_pmc *apmc_ck = to_clk_audio_pmc(hw);
+
+	regmap_update_bits(apmc_ck->regmap, AT91_PMC_AUDIO_PLL0,
+			   AT91_PMC_AUDIO_PLL_PMCEN, 0);
+}
+
+static unsigned long clk_audio_pll_fout(unsigned long parent_rate,
+					unsigned long nd, unsigned long fracr)
+{
+	unsigned long long fr = (unsigned long long)parent_rate * fracr;
+
+	pr_debug("A PLL: %s, fr = %llu\n", __func__, fr);
+
+	fr = DIV_ROUND_CLOSEST_ULL(fr, AUDIO_PLL_DIV_FRAC);
+
+	pr_debug("A PLL: %s, fr = %llu\n", __func__, fr);
+
+	return parent_rate * (nd + 1) + fr;
+}
+
+static unsigned long clk_audio_pll_frac_recalc_rate(struct clk_hw *hw,
+						    unsigned long parent_rate)
+{
+	struct clk_audio_frac *frac = to_clk_audio_frac(hw);
+	unsigned long fout;
+
+	fout = clk_audio_pll_fout(parent_rate, frac->nd, frac->fracr);
+
+	pr_debug("A PLL: %s, fout = %lu (nd = %u, fracr = %lu)\n", __func__,
+		 fout, frac->nd, (unsigned long)frac->fracr);
+
+	return fout;
+}
+
+static unsigned long clk_audio_pll_pad_recalc_rate(struct clk_hw *hw,
+						   unsigned long parent_rate)
+{
+	struct clk_audio_pad *apad_ck = to_clk_audio_pad(hw);
+	unsigned long apad_rate = 0;
+
+	if (apad_ck->qdaudio && apad_ck->div)
+		apad_rate = parent_rate / (apad_ck->qdaudio * apad_ck->div);
+
+	pr_debug("A PLL/PAD: %s, apad_rate = %lu (div = %u, qdaudio = %u)\n",
+		 __func__, apad_rate, apad_ck->div, apad_ck->qdaudio);
+
+	return apad_rate;
+}
+
+static unsigned long clk_audio_pll_pmc_recalc_rate(struct clk_hw *hw,
+						   unsigned long parent_rate)
+{
+	struct clk_audio_pmc *apmc_ck = to_clk_audio_pmc(hw);
+	unsigned long apmc_rate = 0;
+
+	apmc_rate = parent_rate / (apmc_ck->qdpmc + 1);
+
+	pr_debug("A PLL/PMC: %s, apmc_rate = %lu (qdpmc = %u)\n", __func__,
+		 apmc_rate, apmc_ck->qdpmc);
+
+	return apmc_rate;
+}
+
+static int clk_audio_pll_frac_compute_frac(unsigned long rate,
+					   unsigned long parent_rate,
+					   unsigned long *nd,
+					   unsigned long *fracr)
+{
+	unsigned long long tmp, rem;
+
+	if (!rate)
+		return -EINVAL;
+
+	tmp = rate;
+	rem = do_div(tmp, parent_rate);
+	if (!tmp || tmp >= AUDIO_PLL_ND_MAX)
+		return -EINVAL;
+
+	*nd = tmp - 1;
+
+	tmp = rem * AUDIO_PLL_DIV_FRAC;
+	tmp = DIV_ROUND_CLOSEST_ULL(tmp, parent_rate);
+	if (tmp > AT91_PMC_AUDIO_PLL_FRACR_MASK)
+		return -EINVAL;
+
+	/* we can cast here as we verified the bounds just above */
+	*fracr = (unsigned long)tmp;
+
+	return 0;
+}
+
+static int clk_audio_pll_frac_determine_rate(struct clk_hw *hw,
+					     struct clk_rate_request *req)
+{
+	unsigned long fracr, nd;
+	int ret;
+
+	pr_debug("A PLL: %s, rate = %lu (parent_rate = %lu)\n", __func__,
+		 req->rate, req->best_parent_rate);
+
+	req->rate = clamp(req->rate, AUDIO_PLL_FOUT_MIN, AUDIO_PLL_FOUT_MAX);
+
+	req->min_rate = max(req->min_rate, AUDIO_PLL_FOUT_MIN);
+	req->max_rate = min(req->max_rate, AUDIO_PLL_FOUT_MAX);
+
+	ret = clk_audio_pll_frac_compute_frac(req->rate, req->best_parent_rate,
+					      &nd, &fracr);
+	if (ret)
+		return ret;
+
+	req->rate = clk_audio_pll_fout(req->best_parent_rate, nd, fracr);
+
+	req->best_parent_hw = clk_hw_get_parent(hw);
+
+	pr_debug("A PLL: %s, best_rate = %lu (nd = %lu, fracr = %lu)\n",
+		 __func__, req->rate, nd, fracr);
+
+	return 0;
+}
+
+static long clk_audio_pll_pad_round_rate(struct clk_hw *hw, unsigned long rate,
+					 unsigned long *parent_rate)
+{
+	struct clk_hw *pclk = clk_hw_get_parent(hw);
+	long best_rate = -EINVAL;
+	unsigned long best_parent_rate;
+	unsigned long tmp_qd;
+	u32 div;
+	long tmp_rate;
+	int tmp_diff;
+	int best_diff = -1;
+
+	pr_debug("A PLL/PAD: %s, rate = %lu (parent_rate = %lu)\n", __func__,
+		 rate, *parent_rate);
+
+	/*
+	 * Rate divisor is actually made of two different divisors, multiplied
+	 * between themselves before dividing the rate.
+	 * tmp_qd goes from 1 to 31 and div is either 2 or 3.
+	 * In order to avoid testing twice the rate divisor (e.g. divisor 12 can
+	 * be found with (tmp_qd, div) = (2, 6) or (3, 4)), we remove any loop
+	 * for a rate divisor when div is 2 and tmp_qd is a multiple of 3.
+	 * We cannot inverse it (condition div is 3 and tmp_qd is even) or we
+	 * would miss some rate divisor that aren't reachable with div being 2
+	 * (e.g. rate divisor 90 is made with div = 3 and tmp_qd = 30, thus
+	 * tmp_qd is even so we skip it because we think div 2 could make this
+	 * rate divisor which isn't possible since tmp_qd has to be <= 31).
+	 */
+	for (tmp_qd = 1; tmp_qd < AT91_PMC_AUDIO_PLL_QDPAD_EXTDIV_MAX; tmp_qd++)
+		for (div = 2; div <= 3; div++) {
+			if (div == 2 && tmp_qd % 3 == 0)
+				continue;
+
+			best_parent_rate = clk_hw_round_rate(pclk,
+							rate * tmp_qd * div);
+			tmp_rate = best_parent_rate / (div * tmp_qd);
+			tmp_diff = abs(rate - tmp_rate);
+
+			if (best_diff < 0 || best_diff > tmp_diff) {
+				*parent_rate = best_parent_rate;
+				best_rate = tmp_rate;
+				best_diff = tmp_diff;
+			}
+		}
+
+	pr_debug("A PLL/PAD: %s, best_rate = %ld, best_parent_rate = %lu\n",
+		 __func__, best_rate, best_parent_rate);
+
+	return best_rate;
+}
+
+static long clk_audio_pll_pmc_round_rate(struct clk_hw *hw, unsigned long rate,
+					 unsigned long *parent_rate)
+{
+	struct clk_hw *pclk = clk_hw_get_parent(hw);
+	long best_rate = -EINVAL;
+	unsigned long best_parent_rate = 0;
+	u32 tmp_qd = 0, div;
+	long tmp_rate;
+	int tmp_diff;
+	int best_diff = -1;
+
+	pr_debug("A PLL/PMC: %s, rate = %lu (parent_rate = %lu)\n", __func__,
+		 rate, *parent_rate);
+
+	for (div = 1; div <= AUDIO_PLL_QDPMC_MAX; div++) {
+		best_parent_rate = clk_round_rate(pclk->clk, rate * div);
+		tmp_rate = best_parent_rate / div;
+		tmp_diff = abs(rate - tmp_rate);
+
+		if (best_diff < 0 || best_diff > tmp_diff) {
+			*parent_rate = best_parent_rate;
+			best_rate = tmp_rate;
+			best_diff = tmp_diff;
+			tmp_qd = div;
+		}
+	}
+
+	pr_debug("A PLL/PMC: %s, best_rate = %ld, best_parent_rate = %lu (qd = %d)\n",
+		 __func__, best_rate, *parent_rate, tmp_qd - 1);
+
+	return best_rate;
+}
+
+static int clk_audio_pll_frac_set_rate(struct clk_hw *hw, unsigned long rate,
+				       unsigned long parent_rate)
+{
+	struct clk_audio_frac *frac = to_clk_audio_frac(hw);
+	unsigned long fracr, nd;
+	int ret;
+
+	pr_debug("A PLL: %s, rate = %lu (parent_rate = %lu)\n", __func__, rate,
+		 parent_rate);
+
+	if (rate < AUDIO_PLL_FOUT_MIN || rate > AUDIO_PLL_FOUT_MAX)
+		return -EINVAL;
+
+	ret = clk_audio_pll_frac_compute_frac(rate, parent_rate, &nd, &fracr);
+	if (ret)
+		return ret;
+
+	frac->nd = nd;
+	frac->fracr = fracr;
+
+	return 0;
+}
+
+static int clk_audio_pll_pad_set_rate(struct clk_hw *hw, unsigned long rate,
+				      unsigned long parent_rate)
+{
+	struct clk_audio_pad *apad_ck = to_clk_audio_pad(hw);
+	u8 tmp_div;
+
+	pr_debug("A PLL/PAD: %s, rate = %lu (parent_rate = %lu)\n", __func__,
+		 rate, parent_rate);
+
+	if (!rate)
+		return -EINVAL;
+
+	tmp_div = parent_rate / rate;
+	if (tmp_div % 3 == 0) {
+		apad_ck->qdaudio = tmp_div / 3;
+		apad_ck->div = 3;
+	} else {
+		apad_ck->qdaudio = tmp_div / 2;
+		apad_ck->div = 2;
+	}
+
+	return 0;
+}
+
+static int clk_audio_pll_pmc_set_rate(struct clk_hw *hw, unsigned long rate,
+				      unsigned long parent_rate)
+{
+	struct clk_audio_pmc *apmc_ck = to_clk_audio_pmc(hw);
+
+	if (!rate)
+		return -EINVAL;
+
+	pr_debug("A PLL/PMC: %s, rate = %lu (parent_rate = %lu)\n", __func__,
+		 rate, parent_rate);
+
+	apmc_ck->qdpmc = parent_rate / rate - 1;
+
+	return 0;
+}
+
+static const struct clk_ops audio_pll_frac_ops = {
+	.enable = clk_audio_pll_frac_enable,
+	.disable = clk_audio_pll_frac_disable,
+	.recalc_rate = clk_audio_pll_frac_recalc_rate,
+	.determine_rate = clk_audio_pll_frac_determine_rate,
+	.set_rate = clk_audio_pll_frac_set_rate,
+};
+
+static const struct clk_ops audio_pll_pad_ops = {
+	.enable = clk_audio_pll_pad_enable,
+	.disable = clk_audio_pll_pad_disable,
+	.recalc_rate = clk_audio_pll_pad_recalc_rate,
+	.round_rate = clk_audio_pll_pad_round_rate,
+	.set_rate = clk_audio_pll_pad_set_rate,
+};
+
+static const struct clk_ops audio_pll_pmc_ops = {
+	.enable = clk_audio_pll_pmc_enable,
+	.disable = clk_audio_pll_pmc_disable,
+	.recalc_rate = clk_audio_pll_pmc_recalc_rate,
+	.round_rate = clk_audio_pll_pmc_round_rate,
+	.set_rate = clk_audio_pll_pmc_set_rate,
+};
+
+static int of_sama5d2_clk_audio_pll_setup(struct device_node *np,
+					  struct clk_init_data *init,
+					  struct clk_hw *hw,
+					  struct regmap **clk_audio_regmap)
+{
+	struct regmap *regmap;
+	const char *parent_names[1];
+	int ret;
+
+	regmap = syscon_node_to_regmap(of_get_parent(np));
+	if (IS_ERR(regmap))
+		return PTR_ERR(regmap);
+
+	init->name = np->name;
+	of_clk_parent_fill(np, parent_names, 1);
+	init->parent_names = parent_names;
+	init->num_parents = 1;
+
+	hw->init = init;
+	*clk_audio_regmap = regmap;
+
+	ret = clk_hw_register(NULL, hw);
+	if (ret)
+		return ret;
+
+	return of_clk_add_hw_provider(np, of_clk_hw_simple_get, hw);
+}
+
+static void __init of_sama5d2_clk_audio_pll_frac_setup(struct device_node *np)
+{
+	struct clk_audio_frac *frac_ck;
+	struct clk_init_data init = {};
+
+	frac_ck = kzalloc(sizeof(*frac_ck), GFP_KERNEL);
+	if (!frac_ck)
+		return;
+
+	init.ops = &audio_pll_frac_ops;
+	init.flags = CLK_SET_RATE_GATE;
+
+	if (of_sama5d2_clk_audio_pll_setup(np, &init, &frac_ck->hw,
+					   &frac_ck->regmap))
+		kfree(frac_ck);
+}
+
+static void __init of_sama5d2_clk_audio_pll_pad_setup(struct device_node *np)
+{
+	struct clk_audio_pad *apad_ck;
+	struct clk_init_data init = {};
+
+	apad_ck = kzalloc(sizeof(*apad_ck), GFP_KERNEL);
+	if (!apad_ck)
+		return;
+
+	init.ops = &audio_pll_pad_ops;
+	init.flags = CLK_SET_RATE_GATE | CLK_SET_PARENT_GATE |
+		CLK_SET_RATE_PARENT;
+
+	if (of_sama5d2_clk_audio_pll_setup(np, &init, &apad_ck->hw,
+					   &apad_ck->regmap))
+		kfree(apad_ck);
+}
+
+static void __init of_sama5d2_clk_audio_pll_pmc_setup(struct device_node *np)
+{
+	struct clk_audio_pad *apmc_ck;
+	struct clk_init_data init = {};
+
+	apmc_ck = kzalloc(sizeof(*apmc_ck), GFP_KERNEL);
+	if (!apmc_ck)
+		return;
+
+	init.ops = &audio_pll_pmc_ops;
+	init.flags = CLK_SET_RATE_GATE | CLK_SET_PARENT_GATE |
+		CLK_SET_RATE_PARENT;
+
+	if (of_sama5d2_clk_audio_pll_setup(np, &init, &apmc_ck->hw,
+					   &apmc_ck->regmap))
+		kfree(apmc_ck);
+}
+
+CLK_OF_DECLARE(of_sama5d2_clk_audio_pll_frac_setup,
+	       "atmel,sama5d2-clk-audio-pll-frac",
+	       of_sama5d2_clk_audio_pll_frac_setup);
+CLK_OF_DECLARE(of_sama5d2_clk_audio_pll_pad_setup,
+	       "atmel,sama5d2-clk-audio-pll-pad",
+	       of_sama5d2_clk_audio_pll_pad_setup);
+CLK_OF_DECLARE(of_sama5d2_clk_audio_pll_pmc_setup,
+	       "atmel,sama5d2-clk-audio-pll-pmc",
+	       of_sama5d2_clk_audio_pll_pmc_setup);
diff --git a/include/linux/clk/at91_pmc.h b/include/linux/clk/at91_pmc.h
index 17f413bbbedf..6aca5ce8a99a 100644
--- a/include/linux/clk/at91_pmc.h
+++ b/include/linux/clk/at91_pmc.h
@@ -185,4 +185,29 @@
 #define		AT91_PMC_PCR_EN			(0x1  <<  28)				/* Enable */
 #define		AT91_PMC_PCR_GCKEN		(0x1  <<  29)				/* GCK Enable */
 
+#define AT91_PMC_AUDIO_PLL0	0x14c
+#define		AT91_PMC_AUDIO_PLL_PLLEN	(1  <<  0)
+#define		AT91_PMC_AUDIO_PLL_PADEN	(1  <<  1)
+#define		AT91_PMC_AUDIO_PLL_PMCEN	(1  <<  2)
+#define		AT91_PMC_AUDIO_PLL_RESETN	(1  <<  3)
+#define		AT91_PMC_AUDIO_PLL_ND_OFFSET	8
+#define		AT91_PMC_AUDIO_PLL_ND_MASK	(0x7f << AT91_PMC_AUDIO_PLL_ND_OFFSET)
+#define		AT91_PMC_AUDIO_PLL_ND(n)	((n)  << AT91_PMC_AUDIO_PLL_ND_OFFSET)
+#define		AT91_PMC_AUDIO_PLL_QDPMC_OFFSET	16
+#define		AT91_PMC_AUDIO_PLL_QDPMC_MASK	(0x7f << AT91_PMC_AUDIO_PLL_QDPMC_OFFSET)
+#define		AT91_PMC_AUDIO_PLL_QDPMC(n)	((n)  << AT91_PMC_AUDIO_PLL_QDPMC_OFFSET)
+
+#define AT91_PMC_AUDIO_PLL1	0x150
+#define		AT91_PMC_AUDIO_PLL_FRACR_MASK		0x3fffff
+#define		AT91_PMC_AUDIO_PLL_QDPAD_OFFSET		24
+#define		AT91_PMC_AUDIO_PLL_QDPAD_MASK		(0x7f << AT91_PMC_AUDIO_PLL_QDPAD_OFFSET)
+#define		AT91_PMC_AUDIO_PLL_QDPAD(n)		((n)  << AT91_PMC_AUDIO_PLL_QDPAD_OFFSET)
+#define		AT91_PMC_AUDIO_PLL_QDPAD_DIV_OFFSET	AT91_PMC_AUDIO_PLL_QDPAD_OFFSET
+#define		AT91_PMC_AUDIO_PLL_QDPAD_DIV_MASK	(0x3  << AT91_PMC_AUDIO_PLL_QDPAD_DIV_OFFSET)
+#define		AT91_PMC_AUDIO_PLL_QDPAD_DIV(n)		((n)  << AT91_PMC_AUDIO_PLL_QDPAD_DIV_OFFSET)
+#define		AT91_PMC_AUDIO_PLL_QDPAD_EXTDIV_OFFSET	26
+#define		AT91_PMC_AUDIO_PLL_QDPAD_EXTDIV_MAX	0x1f
+#define		AT91_PMC_AUDIO_PLL_QDPAD_EXTDIV_MASK	(AT91_PMC_AUDIO_PLL_QDPAD_EXTDIV_MAX << AT91_PMC_AUDIO_PLL_QDPAD_EXTDIV_OFFSET)
+#define		AT91_PMC_AUDIO_PLL_QDPAD_EXTDIV(n)	((n)  << AT91_PMC_AUDIO_PLL_QDPAD_EXTDIV_OFFSET)
+
 #endif
-- 
cgit v1.2.3


From 8a8f4bf0c48055f0648b5449f4685b6cd0fc1c85 Mon Sep 17 00:00:00 2001
From: Quentin Schulz <quentin.schulz@free-electrons.com>
Date: Thu, 10 Aug 2017 08:34:04 +0200
Subject: clk: at91: clk-generated: create function to find best_diff

The way to find the best_diff and do the appropriate process afterwards
can be re-used.

This patch prepares the driver for an upcoming patch that will allow
clk_generated to determine the rate of the audio_pll.

Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
---
 drivers/clk/at91/clk-generated.c | 41 ++++++++++++++++++++++++++--------------
 1 file changed, 27 insertions(+), 14 deletions(-)

diff --git a/drivers/clk/at91/clk-generated.c b/drivers/clk/at91/clk-generated.c
index ef4b4e03de04..7260e498e059 100644
--- a/drivers/clk/at91/clk-generated.c
+++ b/drivers/clk/at91/clk-generated.c
@@ -99,15 +99,36 @@ clk_generated_recalc_rate(struct clk_hw *hw,
 	return DIV_ROUND_CLOSEST(parent_rate, gck->gckdiv + 1);
 }
 
+static void clk_generated_best_diff(struct clk_rate_request *req,
+				    struct clk_hw *parent,
+				    unsigned long parent_rate, u32 div,
+				    int *best_diff, long *best_rate)
+{
+	unsigned long tmp_rate;
+	int tmp_diff;
+
+	if (!div)
+		tmp_rate = parent_rate;
+	else
+		tmp_rate = parent_rate / div;
+	tmp_diff = abs(req->rate - tmp_rate);
+
+	if (*best_diff < 0 || *best_diff > tmp_diff) {
+		*best_rate = tmp_rate;
+		*best_diff = tmp_diff;
+		req->best_parent_rate = parent_rate;
+		req->best_parent_hw = parent;
+	}
+}
+
 static int clk_generated_determine_rate(struct clk_hw *hw,
 					struct clk_rate_request *req)
 {
 	struct clk_generated *gck = to_clk_generated(hw);
 	struct clk_hw *parent = NULL;
 	long best_rate = -EINVAL;
-	unsigned long tmp_rate, min_rate;
+	unsigned long min_rate;
 	int best_diff = -1;
-	int tmp_diff;
 	int i;
 
 	for (i = 0; i < clk_hw_get_num_parents(hw); i++) {
@@ -125,18 +146,10 @@ static int clk_generated_determine_rate(struct clk_hw *hw,
 			continue;
 
 		div = DIV_ROUND_CLOSEST(parent_rate, req->rate);
-		if (!div)
-			tmp_rate = parent_rate;
-		else
-			tmp_rate = parent_rate / div;
-		tmp_diff = abs(req->rate - tmp_rate);
-
-		if (best_diff < 0 || best_diff > tmp_diff) {
-			best_rate = tmp_rate;
-			best_diff = tmp_diff;
-			req->best_parent_rate = parent_rate;
-			req->best_parent_hw = parent;
-		}
+
+		clk_generated_best_diff(req, parent, parent_rate, div,
+					&best_diff, &best_rate);
+
 
 		if (!best_diff)
 			break;
-- 
cgit v1.2.3


From 1a1a36d72e3d34afbb738bd3b00a0b09382962fb Mon Sep 17 00:00:00 2001
From: Quentin Schulz <quentin.schulz@free-electrons.com>
Date: Thu, 10 Aug 2017 08:34:05 +0200
Subject: clk: at91: clk-generated: make gclk determine audio_pll rate

This allows gclk to determine audio_pll rate and set the parent rate
accordingly.

However, there are multiple children clocks that could technically
change the rate of audio_pll (via gck). With the rate locking, the first
consumer to enable the clock will be the one definitely setting the rate
of the clock.

Since audio IPs are most likely to request the same rate, we enforce
that the only clks able to modify gck rate are those of audio IPs.

To remain consistent, we deny other clocks to be children of audio_pll.

Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
---
 drivers/clk/at91/clk-generated.c | 63 ++++++++++++++++++++++++++++++++++++----
 1 file changed, 57 insertions(+), 6 deletions(-)

diff --git a/drivers/clk/at91/clk-generated.c b/drivers/clk/at91/clk-generated.c
index 7260e498e059..33481368740e 100644
--- a/drivers/clk/at91/clk-generated.c
+++ b/drivers/clk/at91/clk-generated.c
@@ -26,6 +26,13 @@
 #define GENERATED_SOURCE_MAX	6
 #define GENERATED_MAX_DIV	255
 
+#define GCK_ID_SSC0		43
+#define GCK_ID_SSC1		44
+#define GCK_ID_I2S0		54
+#define GCK_ID_I2S1		55
+#define GCK_ID_CLASSD		59
+#define GCK_INDEX_DT_AUDIO_PLL	5
+
 struct clk_generated {
 	struct clk_hw hw;
 	struct regmap *regmap;
@@ -34,6 +41,7 @@ struct clk_generated {
 	u32 id;
 	u32 gckdiv;
 	u8 parent_id;
+	bool audio_pll_allowed;
 };
 
 #define to_clk_generated(hw) \
@@ -126,15 +134,14 @@ static int clk_generated_determine_rate(struct clk_hw *hw,
 {
 	struct clk_generated *gck = to_clk_generated(hw);
 	struct clk_hw *parent = NULL;
+	struct clk_rate_request req_parent = *req;
 	long best_rate = -EINVAL;
-	unsigned long min_rate;
+	unsigned long min_rate, parent_rate;
 	int best_diff = -1;
 	int i;
+	u32 div;
 
-	for (i = 0; i < clk_hw_get_num_parents(hw); i++) {
-		u32 div;
-		unsigned long parent_rate;
-
+	for (i = 0; i < clk_hw_get_num_parents(hw) - 1; i++) {
 		parent = clk_hw_get_parent_by_index(hw, i);
 		if (!parent)
 			continue;
@@ -150,11 +157,38 @@ static int clk_generated_determine_rate(struct clk_hw *hw,
 		clk_generated_best_diff(req, parent, parent_rate, div,
 					&best_diff, &best_rate);
 
+		if (!best_diff)
+			break;
+	}
+
+	/*
+	 * The audio_pll rate can be modified, unlike the five others clocks
+	 * that should never be altered.
+	 * The audio_pll can technically be used by multiple consumers. However,
+	 * with the rate locking, the first consumer to enable to clock will be
+	 * the one definitely setting the rate of the clock.
+	 * Since audio IPs are most likely to request the same rate, we enforce
+	 * that the only clks able to modify gck rate are those of audio IPs.
+	 */
+
+	if (!gck->audio_pll_allowed)
+		goto end;
+
+	parent = clk_hw_get_parent_by_index(hw, GCK_INDEX_DT_AUDIO_PLL);
+	if (!parent)
+		goto end;
+
+	for (div = 1; div < GENERATED_MAX_DIV + 2; div++) {
+		req_parent.rate = req->rate * div;
+		__clk_determine_rate(parent, &req_parent);
+		clk_generated_best_diff(req, parent, req_parent.rate, div,
+					&best_diff, &best_rate);
 
 		if (!best_diff)
 			break;
 	}
 
+end:
 	pr_debug("GCLK: %s, best_rate = %ld, parent clk: %s @ %ld\n",
 		 __func__, best_rate,
 		 __clk_get_name((req->best_parent_hw)->clk),
@@ -264,7 +298,8 @@ at91_clk_register_generated(struct regmap *regmap, spinlock_t *lock,
 	init.ops = &generated_ops;
 	init.parent_names = parent_names;
 	init.num_parents = num_parents;
-	init.flags = CLK_SET_RATE_GATE | CLK_SET_PARENT_GATE;
+	init.flags = CLK_SET_RATE_GATE | CLK_SET_PARENT_GATE |
+		CLK_SET_RATE_PARENT;
 
 	gck->id = id;
 	gck->hw.init = &init;
@@ -296,6 +331,7 @@ static void __init of_sama5d2_clk_generated_setup(struct device_node *np)
 	struct device_node *gcknp;
 	struct clk_range range = CLK_RANGE(0, 0);
 	struct regmap *regmap;
+	struct clk_generated *gck;
 
 	num_parents = of_clk_get_parent_count(np);
 	if (num_parents == 0 || num_parents > GENERATED_SOURCE_MAX)
@@ -327,6 +363,21 @@ static void __init of_sama5d2_clk_generated_setup(struct device_node *np)
 		hw = at91_clk_register_generated(regmap, &pmc_pcr_lock, name,
 						  parent_names, num_parents,
 						  id, &range);
+
+		gck = to_clk_generated(hw);
+
+		if (of_device_is_compatible(np,
+					    "atmel,sama5d2-clk-generated")) {
+			if (gck->id == GCK_ID_SSC0 || gck->id == GCK_ID_SSC1 ||
+			    gck->id == GCK_ID_I2S0 || gck->id == GCK_ID_I2S1 ||
+			    gck->id == GCK_ID_CLASSD)
+				gck->audio_pll_allowed = true;
+			else
+				gck->audio_pll_allowed = false;
+		} else {
+			gck->audio_pll_allowed = false;
+		}
+
 		if (IS_ERR(hw))
 			continue;
 
-- 
cgit v1.2.3


From f8fef412f34ba55fea97b7687ea881c00caf6fc0 Mon Sep 17 00:00:00 2001
From: Quentin Schulz <quentin.schulz@free-electrons.com>
Date: Thu, 10 Aug 2017 08:34:06 +0200
Subject: ASoC: atmel-classd: remove aclk clock from DT binding

Since gclk (generated-clk) is now able to determine the rate of the
audio_pll, there is no need for classd to have a direct phandle to the
audio_pll while already having a phandle to gclk.

This binding is used by no board in mainline so it is safe to be
modified.

Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
---
 Documentation/devicetree/bindings/sound/atmel-classd.txt | 9 +++------
 1 file changed, 3 insertions(+), 6 deletions(-)

diff --git a/Documentation/devicetree/bindings/sound/atmel-classd.txt b/Documentation/devicetree/bindings/sound/atmel-classd.txt
index 549e701cb7a1..898551076382 100644
--- a/Documentation/devicetree/bindings/sound/atmel-classd.txt
+++ b/Documentation/devicetree/bindings/sound/atmel-classd.txt
@@ -13,13 +13,11 @@ Required properties:
 	Must be "tx".
 - clock-names
 	Tuple listing input clock names.
-	Required elements: "pclk", "gclk" and "aclk".
+	Required elements: "pclk" and "gclk".
 - clocks
 	Please refer to clock-bindings.txt.
 - assigned-clocks
 	Should be <&classd_gclk>.
-- assigned-clock-parents
-	Should be <&audio_pll_pmc>.
 
 Optional properties:
 - pinctrl-names, pinctrl-0
@@ -45,10 +43,9 @@ classd: classd@fc048000 {
 			(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
 			| AT91_XDMAC_DT_PERID(47))>;
 		dma-names = "tx";
-		clocks = <&classd_clk>, <&classd_gclk>, <&audio_pll_pmc>;
-		clock-names = "pclk", "gclk", "aclk";
+		clocks = <&classd_clk>, <&classd_gclk>;
+		clock-names = "pclk", "gclk";
 		assigned-clocks = <&classd_gclk>;
-		assigned-clock-parents = <&audio_pll_pmc>;
 
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_classd_default>;
-- 
cgit v1.2.3


From 4ab6cf11e703de24f21a50a027a48fca787f7a00 Mon Sep 17 00:00:00 2001
From: Quentin Schulz <quentin.schulz@free-electrons.com>
Date: Thu, 10 Aug 2017 08:34:07 +0200
Subject: ASoC: atmel-classd: remove aclk clock

Since gclk (generated-clk) is now able to determine the rate of the
audio_pll, there is no need for classd to have a direct phandle to the
audio_pll while already having a phandle to gclk.

Thus, remove all mentions to aclk in classd driver and update macros and
variable names.

Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
---
 sound/soc/atmel/atmel-classd.c | 47 +++++++++++++-----------------------------
 1 file changed, 14 insertions(+), 33 deletions(-)

diff --git a/sound/soc/atmel/atmel-classd.c b/sound/soc/atmel/atmel-classd.c
index b7ef8c59b49a..be6b775b6f46 100644
--- a/sound/soc/atmel/atmel-classd.c
+++ b/sound/soc/atmel/atmel-classd.c
@@ -32,7 +32,6 @@ struct atmel_classd {
 	struct regmap *regmap;
 	struct clk *pclk;
 	struct clk *gclk;
-	struct clk *aclk;
 	int irq;
 	const struct atmel_classd_pdata *pdata;
 };
@@ -330,11 +329,6 @@ static int atmel_classd_codec_dai_startup(struct snd_pcm_substream *substream,
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
 	struct atmel_classd *dd = snd_soc_card_get_drvdata(rtd->card);
-	int ret;
-
-	ret = clk_prepare_enable(dd->aclk);
-	if (ret)
-		return ret;
 
 	return clk_prepare_enable(dd->gclk);
 }
@@ -357,31 +351,31 @@ static int atmel_classd_codec_dai_digital_mute(struct snd_soc_dai *codec_dai,
 	return 0;
 }
 
-#define CLASSD_ACLK_RATE_11M2896_MPY_8 (112896 * 100 * 8)
-#define CLASSD_ACLK_RATE_12M288_MPY_8  (12288 * 1000 * 8)
+#define CLASSD_GCLK_RATE_11M2896_MPY_8 (112896 * 100 * 8)
+#define CLASSD_GCLK_RATE_12M288_MPY_8  (12288 * 1000 * 8)
 
 static struct {
 	int rate;
 	int sample_rate;
 	int dsp_clk;
-	unsigned long aclk_rate;
+	unsigned long gclk_rate;
 } const sample_rates[] = {
 	{ 8000,  CLASSD_INTPMR_FRAME_8K,
-	CLASSD_INTPMR_DSP_CLK_FREQ_12M288, CLASSD_ACLK_RATE_12M288_MPY_8 },
+	CLASSD_INTPMR_DSP_CLK_FREQ_12M288, CLASSD_GCLK_RATE_12M288_MPY_8 },
 	{ 16000, CLASSD_INTPMR_FRAME_16K,
-	CLASSD_INTPMR_DSP_CLK_FREQ_12M288, CLASSD_ACLK_RATE_12M288_MPY_8 },
+	CLASSD_INTPMR_DSP_CLK_FREQ_12M288, CLASSD_GCLK_RATE_12M288_MPY_8 },
 	{ 32000, CLASSD_INTPMR_FRAME_32K,
-	CLASSD_INTPMR_DSP_CLK_FREQ_12M288, CLASSD_ACLK_RATE_12M288_MPY_8 },
+	CLASSD_INTPMR_DSP_CLK_FREQ_12M288, CLASSD_GCLK_RATE_12M288_MPY_8 },
 	{ 48000, CLASSD_INTPMR_FRAME_48K,
-	CLASSD_INTPMR_DSP_CLK_FREQ_12M288, CLASSD_ACLK_RATE_12M288_MPY_8 },
+	CLASSD_INTPMR_DSP_CLK_FREQ_12M288, CLASSD_GCLK_RATE_12M288_MPY_8 },
 	{ 96000, CLASSD_INTPMR_FRAME_96K,
-	CLASSD_INTPMR_DSP_CLK_FREQ_12M288, CLASSD_ACLK_RATE_12M288_MPY_8 },
+	CLASSD_INTPMR_DSP_CLK_FREQ_12M288, CLASSD_GCLK_RATE_12M288_MPY_8 },
 	{ 22050, CLASSD_INTPMR_FRAME_22K,
-	CLASSD_INTPMR_DSP_CLK_FREQ_11M2896, CLASSD_ACLK_RATE_11M2896_MPY_8 },
+	CLASSD_INTPMR_DSP_CLK_FREQ_11M2896, CLASSD_GCLK_RATE_11M2896_MPY_8 },
 	{ 44100, CLASSD_INTPMR_FRAME_44K,
-	CLASSD_INTPMR_DSP_CLK_FREQ_11M2896, CLASSD_ACLK_RATE_11M2896_MPY_8 },
+	CLASSD_INTPMR_DSP_CLK_FREQ_11M2896, CLASSD_GCLK_RATE_11M2896_MPY_8 },
 	{ 88200, CLASSD_INTPMR_FRAME_88K,
-	CLASSD_INTPMR_DSP_CLK_FREQ_11M2896, CLASSD_ACLK_RATE_11M2896_MPY_8 },
+	CLASSD_INTPMR_DSP_CLK_FREQ_11M2896, CLASSD_GCLK_RATE_11M2896_MPY_8 },
 };
 
 static int
@@ -410,13 +404,12 @@ atmel_classd_codec_dai_hw_params(struct snd_pcm_substream *substream,
 	}
 
 	dev_dbg(codec->dev,
-		"Selected SAMPLE_RATE of %dHz, ACLK_RATE of %ldHz\n",
-		sample_rates[best].rate, sample_rates[best].aclk_rate);
+		"Selected SAMPLE_RATE of %dHz, GCLK_RATE of %ldHz\n",
+		sample_rates[best].rate, sample_rates[best].gclk_rate);
 
 	clk_disable_unprepare(dd->gclk);
-	clk_disable_unprepare(dd->aclk);
 
-	ret = clk_set_rate(dd->aclk, sample_rates[best].aclk_rate);
+	ret = clk_set_rate(dd->gclk, sample_rates[best].gclk_rate);
 	if (ret)
 		return ret;
 
@@ -426,10 +419,6 @@ atmel_classd_codec_dai_hw_params(struct snd_pcm_substream *substream,
 
 	snd_soc_update_bits(codec, CLASSD_INTPMR, mask, val);
 
-	ret = clk_prepare_enable(dd->aclk);
-	if (ret)
-		return ret;
-
 	return clk_prepare_enable(dd->gclk);
 }
 
@@ -441,7 +430,6 @@ atmel_classd_codec_dai_shutdown(struct snd_pcm_substream *substream,
 	struct atmel_classd *dd = snd_soc_card_get_drvdata(rtd->card);
 
 	clk_disable_unprepare(dd->gclk);
-	clk_disable_unprepare(dd->aclk);
 }
 
 static int atmel_classd_codec_dai_prepare(struct snd_pcm_substream *substream,
@@ -596,13 +584,6 @@ static int atmel_classd_probe(struct platform_device *pdev)
 		return ret;
 	}
 
-	dd->aclk = devm_clk_get(dev, "aclk");
-	if (IS_ERR(dd->aclk)) {
-		ret = PTR_ERR(dd->aclk);
-		dev_err(dev, "failed to get audio clock: %d\n", ret);
-		return ret;
-	}
-
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	io_base = devm_ioremap_resource(dev, res);
 	if (IS_ERR(io_base)) {
-- 
cgit v1.2.3


From 73c950da6ec523136090d6d4d6907a6ea8e8b67b Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@armlinux.org.uk>
Date: Wed, 26 Jul 2017 09:18:08 +0100
Subject: clk: si5351: fix PLL reset

Changing the audio sample rate on the SolidRun Cubox disrupts the video
output.  The Si5351 provides both the video clock (using PLLA on output
0) and the audio clock (using PLLB on output 2).

When the rate of clock output 2 is changed, it reconfigures PLLB, which
results in both PLLA and PLLB being reset.  The reset of PLLA causes
clock output 0 to be disrupted, thereby causing a loss of sync by the
attached display device.

Hence, each time the audio sample rate changes (eg, when a video player
starts up, or when starting to play music) the video display momentarily
blanks while the Si5351 settles down.  Prior to the commit below, this
behaviour did not happen.

Fix this by only resetting only the PLL which has been changed.

Fixes: 6dc669a22c77 ("clk: si5351: Add PLL soft reset")
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
---
 drivers/clk/clk-si5351.c | 12 +++++-------
 1 file changed, 5 insertions(+), 7 deletions(-)

diff --git a/drivers/clk/clk-si5351.c b/drivers/clk/clk-si5351.c
index 2492442eea77..20d90769cced 100644
--- a/drivers/clk/clk-si5351.c
+++ b/drivers/clk/clk-si5351.c
@@ -519,6 +519,11 @@ static int si5351_pll_set_rate(struct clk_hw *hw, unsigned long rate,
 		SI5351_CLK_INTEGER_MODE,
 		(hwdata->params.p2 == 0) ? SI5351_CLK_INTEGER_MODE : 0);
 
+	/* Do a pll soft reset on the affected pll */
+	si5351_reg_write(hwdata->drvdata, SI5351_PLL_RESET,
+			 hwdata->num == 0 ? SI5351_PLL_RESET_A :
+					    SI5351_PLL_RESET_B);
+
 	dev_dbg(&hwdata->drvdata->client->dev,
 		"%s - %s: p1 = %lu, p2 = %lu, p3 = %lu, parent_rate = %lu, rate = %lu\n",
 		__func__, clk_hw_get_name(hw),
@@ -1091,13 +1096,6 @@ static int si5351_clkout_set_rate(struct clk_hw *hw, unsigned long rate,
 	si5351_set_bits(hwdata->drvdata, SI5351_CLK0_CTRL + hwdata->num,
 			SI5351_CLK_POWERDOWN, 0);
 
-	/*
-	 * Do a pll soft reset on both plls, needed in some cases to get
-	 * all outputs running.
-	 */
-	si5351_reg_write(hwdata->drvdata, SI5351_PLL_RESET,
-			 SI5351_PLL_RESET_A | SI5351_PLL_RESET_B);
-
 	dev_dbg(&hwdata->drvdata->client->dev,
 		"%s - %s: rdiv = %u, parent_rate = %lu, rate = %lu\n",
 		__func__, clk_hw_get_name(hw), (1 << rdiv),
-- 
cgit v1.2.3