From 9180ac50716a097a407c6d7e7e4589754a922260 Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Tue, 23 Sep 2014 23:02:41 +0300 Subject: iwlwifi: configure the LTR The LTR is the handshake between the device and the root complex about the latency allowed when the bus exits power save. This configuration was missing and this led to high latency in the link power up. The end user could experience high latency in the network because of this. Cc: [3.10+] Signed-off-by: Emmanuel Grumbach --- drivers/net/wireless/iwlwifi/iwl-trans.h | 2 ++ drivers/net/wireless/iwlwifi/mvm/fw-api-power.h | 35 ++++++++++++++++++++++++- drivers/net/wireless/iwlwifi/mvm/fw-api.h | 1 + drivers/net/wireless/iwlwifi/mvm/fw.c | 9 +++++++ drivers/net/wireless/iwlwifi/mvm/ops.c | 1 + drivers/net/wireless/iwlwifi/pcie/trans.c | 16 ++++++----- 6 files changed, 56 insertions(+), 8 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-trans.h b/drivers/net/wireless/iwlwifi/iwl-trans.h index 9eb85249e89c..d8fc548c0d6c 100644 --- a/drivers/net/wireless/iwlwifi/iwl-trans.h +++ b/drivers/net/wireless/iwlwifi/iwl-trans.h @@ -563,6 +563,7 @@ enum iwl_trans_state { * Set during transport allocation. * @hw_id_str: a string with info about HW ID. Set during transport allocation. * @pm_support: set to true in start_hw if link pm is supported + * @ltr_enabled: set to true if the LTR is enabled * @dev_cmd_pool: pool for Tx cmd allocation - for internal use only. * The user should use iwl_trans_{alloc,free}_tx_cmd. * @dev_cmd_headroom: room needed for the transport's private use before the @@ -589,6 +590,7 @@ struct iwl_trans { u8 rx_mpdu_cmd, rx_mpdu_cmd_hdr_size; bool pm_support; + bool ltr_enabled; /* The following fields are internal only */ struct kmem_cache *dev_cmd_pool; diff --git a/drivers/net/wireless/iwlwifi/mvm/fw-api-power.h b/drivers/net/wireless/iwlwifi/mvm/fw-api-power.h index 27dd86395b39..2fd8ad4633e0 100644 --- a/drivers/net/wireless/iwlwifi/mvm/fw-api-power.h +++ b/drivers/net/wireless/iwlwifi/mvm/fw-api-power.h @@ -68,13 +68,46 @@ /* Power Management Commands, Responses, Notifications */ +/** + * enum iwl_ltr_config_flags - masks for LTR config command flags + * @LTR_CFG_FLAG_FEATURE_ENABLE: Feature operational status + * @LTR_CFG_FLAG_HW_DIS_ON_SHADOW_REG_ACCESS: allow LTR change on shadow + * memory access + * @LTR_CFG_FLAG_HW_EN_SHRT_WR_THROUGH: allow LTR msg send on ANY LTR + * reg change + * @LTR_CFG_FLAG_HW_DIS_ON_D0_2_D3: allow LTR msg send on transition from + * D0 to D3 + * @LTR_CFG_FLAG_SW_SET_SHORT: fixed static short LTR register + * @LTR_CFG_FLAG_SW_SET_LONG: fixed static short LONG register + * @LTR_CFG_FLAG_DENIE_C10_ON_PD: allow going into C10 on PD + */ +enum iwl_ltr_config_flags { + LTR_CFG_FLAG_FEATURE_ENABLE = BIT(0), + LTR_CFG_FLAG_HW_DIS_ON_SHADOW_REG_ACCESS = BIT(1), + LTR_CFG_FLAG_HW_EN_SHRT_WR_THROUGH = BIT(2), + LTR_CFG_FLAG_HW_DIS_ON_D0_2_D3 = BIT(3), + LTR_CFG_FLAG_SW_SET_SHORT = BIT(4), + LTR_CFG_FLAG_SW_SET_LONG = BIT(5), + LTR_CFG_FLAG_DENIE_C10_ON_PD = BIT(6), +}; + +/** + * struct iwl_ltr_config_cmd - configures the LTR + * @flags: See %enum iwl_ltr_config_flags + */ +struct iwl_ltr_config_cmd { + __le32 flags; + __le32 static_long; + __le32 static_short; +} __packed; + /* Radio LP RX Energy Threshold measured in dBm */ #define POWER_LPRX_RSSI_THRESHOLD 75 #define POWER_LPRX_RSSI_THRESHOLD_MAX 94 #define POWER_LPRX_RSSI_THRESHOLD_MIN 30 /** - * enum iwl_scan_flags - masks for power table command flags + * enum iwl_power_flags - masks for power table command flags * @POWER_FLAGS_POWER_SAVE_ENA_MSK: '1' Allow to save power by turning off * receiver and transmitter. '0' - does not allow. * @POWER_FLAGS_POWER_MANAGEMENT_ENA_MSK: '0' Driver disables power management, diff --git a/drivers/net/wireless/iwlwifi/mvm/fw-api.h b/drivers/net/wireless/iwlwifi/mvm/fw-api.h index 667a92274c87..c62575d86bcd 100644 --- a/drivers/net/wireless/iwlwifi/mvm/fw-api.h +++ b/drivers/net/wireless/iwlwifi/mvm/fw-api.h @@ -157,6 +157,7 @@ enum { /* Power - legacy power table command */ POWER_TABLE_CMD = 0x77, PSM_UAPSD_AP_MISBEHAVING_NOTIFICATION = 0x78, + LTR_CONFIG = 0xee, /* Thermal Throttling*/ REPLY_THERMAL_MNG_BACKOFF = 0x7e, diff --git a/drivers/net/wireless/iwlwifi/mvm/fw.c b/drivers/net/wireless/iwlwifi/mvm/fw.c index 23fd711a67e4..e0d9f19650b0 100644 --- a/drivers/net/wireless/iwlwifi/mvm/fw.c +++ b/drivers/net/wireless/iwlwifi/mvm/fw.c @@ -480,6 +480,15 @@ int iwl_mvm_up(struct iwl_mvm *mvm) /* Initialize tx backoffs to the minimal possible */ iwl_mvm_tt_tx_backoff(mvm, 0); + if (mvm->trans->ltr_enabled) { + struct iwl_ltr_config_cmd cmd = { + .flags = cpu_to_le32(LTR_CFG_FLAG_FEATURE_ENABLE), + }; + + WARN_ON(iwl_mvm_send_cmd_pdu(mvm, LTR_CONFIG, 0, + sizeof(cmd), &cmd)); + } + ret = iwl_mvm_power_update_device(mvm); if (ret) goto error; diff --git a/drivers/net/wireless/iwlwifi/mvm/ops.c b/drivers/net/wireless/iwlwifi/mvm/ops.c index 15aa298ee79c..48cb25a93591 100644 --- a/drivers/net/wireless/iwlwifi/mvm/ops.c +++ b/drivers/net/wireless/iwlwifi/mvm/ops.c @@ -336,6 +336,7 @@ static const char *const iwl_mvm_cmd_strings[REPLY_MAX] = { CMD(DTS_MEASUREMENT_NOTIFICATION), CMD(REPLY_THERMAL_MNG_BACKOFF), CMD(MAC_PM_POWER_TABLE), + CMD(LTR_CONFIG), CMD(BT_COEX_CI), CMD(BT_COEX_UPDATE_SW_BOOST), CMD(BT_COEX_UPDATE_CORUN_LUT), diff --git a/drivers/net/wireless/iwlwifi/pcie/trans.c b/drivers/net/wireless/iwlwifi/pcie/trans.c index 1393bac0025c..c706dba67cdd 100644 --- a/drivers/net/wireless/iwlwifi/pcie/trans.c +++ b/drivers/net/wireless/iwlwifi/pcie/trans.c @@ -174,6 +174,7 @@ static void iwl_pcie_apm_config(struct iwl_trans *trans) { struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans); u16 lctl; + u16 cap; /* * HW bug W/A for instability in PCIe bus L0S->L1 transition. @@ -184,16 +185,17 @@ static void iwl_pcie_apm_config(struct iwl_trans *trans) * power savings, even without L1. */ pcie_capability_read_word(trans_pcie->pci_dev, PCI_EXP_LNKCTL, &lctl); - if (lctl & PCI_EXP_LNKCTL_ASPM_L1) { - /* L1-ASPM enabled; disable(!) L0S */ + if (lctl & PCI_EXP_LNKCTL_ASPM_L1) iwl_set_bit(trans, CSR_GIO_REG, CSR_GIO_REG_VAL_L0S_ENABLED); - dev_info(trans->dev, "L1 Enabled; Disabling L0S\n"); - } else { - /* L1-ASPM disabled; enable(!) L0S */ + else iwl_clear_bit(trans, CSR_GIO_REG, CSR_GIO_REG_VAL_L0S_ENABLED); - dev_info(trans->dev, "L1 Disabled; Enabling L0S\n"); - } trans->pm_support = !(lctl & PCI_EXP_LNKCTL_ASPM_L0S); + + pcie_capability_read_word(trans_pcie->pci_dev, PCI_EXP_DEVCTL2, &cap); + trans->ltr_enabled = cap & PCI_EXP_DEVCTL2_LTR_EN; + dev_info(trans->dev, "L1 %sabled - LTR %sabled\n", + (lctl & PCI_EXP_LNKCTL_ASPM_L1) ? "En" : "Dis", + trans->ltr_enabled ? "En" : "Dis"); } /* -- cgit v1.2.3 From 405b7338abc5ceac4a420ce7f49cc9b530d4e78b Mon Sep 17 00:00:00 2001 From: Liad Kaufman Date: Tue, 23 Sep 2014 15:15:17 +0300 Subject: iwlwifi: 8000: fix string given to MODULE_FIRMWARE I changed the string but forgot to update the fix also to MODULE_FIRMWARE(). Signed-off-by: Liad Kaufman Signed-off-by: Emmanuel Grumbach --- drivers/net/wireless/iwlwifi/iwl-8000.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-8000.c b/drivers/net/wireless/iwlwifi/iwl-8000.c index e4351487ca72..d2b7234b1c73 100644 --- a/drivers/net/wireless/iwlwifi/iwl-8000.c +++ b/drivers/net/wireless/iwlwifi/iwl-8000.c @@ -82,7 +82,8 @@ #define IWL8000_TX_POWER_VERSION 0xffff /* meaningless */ #define IWL8000_FW_PRE "iwlwifi-8000" -#define IWL8000_MODULE_FIRMWARE(api) IWL8000_FW_PRE __stringify(api) ".ucode" +#define IWL8000_MODULE_FIRMWARE(api) \ + IWL8000_FW_PRE "-" __stringify(api) ".ucode" #define NVM_HW_SECTION_NUM_FAMILY_8000 10 #define DEFAULT_NVM_FILE_FAMILY_8000 "iwl_nvm_8000.bin" -- cgit v1.2.3 From d14b28fd2c61af0bf310230472e342864d799c98 Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Mon, 22 Sep 2014 16:12:24 +0300 Subject: iwlwifi: mvm: BT Coex - update the MPLUT Boost register value Cc: [3.16+] Fixes: 2adc8949efab ("iwlwifi: mvm: BT Coex - fix boost register / LUT values") Signed-off-by: Emmanuel Grumbach --- drivers/net/wireless/iwlwifi/mvm/coex.c | 4 ++-- drivers/net/wireless/iwlwifi/mvm/coex_legacy.c | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/mvm/coex.c b/drivers/net/wireless/iwlwifi/mvm/coex.c index 8df2021f9856..da2ffb785194 100644 --- a/drivers/net/wireless/iwlwifi/mvm/coex.c +++ b/drivers/net/wireless/iwlwifi/mvm/coex.c @@ -303,8 +303,8 @@ static const __le64 iwl_ci_mask[][3] = { }; static const __le32 iwl_bt_mprio_lut[BT_COEX_MULTI_PRIO_LUT_SIZE] = { - cpu_to_le32(0x28412201), - cpu_to_le32(0x11118451), + cpu_to_le32(0x2e402280), + cpu_to_le32(0x7711a751), }; struct corunning_block_luts { diff --git a/drivers/net/wireless/iwlwifi/mvm/coex_legacy.c b/drivers/net/wireless/iwlwifi/mvm/coex_legacy.c index 585c0ab4a3ec..8a1d2f33d5b7 100644 --- a/drivers/net/wireless/iwlwifi/mvm/coex_legacy.c +++ b/drivers/net/wireless/iwlwifi/mvm/coex_legacy.c @@ -291,8 +291,8 @@ static const __le64 iwl_ci_mask[][3] = { }; static const __le32 iwl_bt_mprio_lut[BT_COEX_MULTI_PRIO_LUT_SIZE] = { - cpu_to_le32(0x28412201), - cpu_to_le32(0x11118451), + cpu_to_le32(0x2e402280), + cpu_to_le32(0x7711a751), }; struct corunning_block_luts { -- cgit v1.2.3 From 3856b78c1be32a2afe0618c7a84e05ff8c03cf10 Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Mon, 22 Sep 2014 12:03:41 +0300 Subject: iwlwifi: mvm: BT coex - fix BT prio for probe requests The probe requests sent during scan must get BT prio 3. Fix that. Signed-off-by: Emmanuel Grumbach --- drivers/net/wireless/iwlwifi/mvm/scan.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/iwlwifi/mvm/scan.c b/drivers/net/wireless/iwlwifi/mvm/scan.c index cb85e63c20aa..b280d5d87127 100644 --- a/drivers/net/wireless/iwlwifi/mvm/scan.c +++ b/drivers/net/wireless/iwlwifi/mvm/scan.c @@ -459,7 +459,8 @@ int iwl_mvm_scan_request(struct iwl_mvm *mvm, basic_ssid ? 1 : 0); cmd->tx_cmd.tx_flags = cpu_to_le32(TX_CMD_FLG_SEQ_CTL | - TX_CMD_FLG_BT_DIS); + 3 << TX_CMD_FLG_BT_PRIO_POS); + cmd->tx_cmd.sta_id = mvm->aux_sta.sta_id; cmd->tx_cmd.life_time = cpu_to_le32(TX_CMD_LIFE_TIME_INFINITE); cmd->tx_cmd.rate_n_flags = -- cgit v1.2.3 From 79b7a69d730180d8bf535e52fe2b4f3dd5904007 Mon Sep 17 00:00:00 2001 From: Haim Dreyfuss Date: Sun, 14 Sep 2014 12:40:00 +0300 Subject: iwlwifi: mvm: Add tx power condition to bss_info_changed_ap_ibss The tx power should be limited from many reasons. currently, setting the tx power is available by the mvm only for station interface. Adding the tx power condition to bss_info_changed_ap_ibss make it available also for AP. Signed-off-by: Haim Dreyfuss Signed-off-by: Emmanuel Grumbach --- drivers/net/wireless/iwlwifi/mvm/mac80211.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/net/wireless/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/iwlwifi/mvm/mac80211.c index c7a73c68bdab..892a6bc26686 100644 --- a/drivers/net/wireless/iwlwifi/mvm/mac80211.c +++ b/drivers/net/wireless/iwlwifi/mvm/mac80211.c @@ -1734,6 +1734,13 @@ iwl_mvm_bss_info_changed_ap_ibss(struct iwl_mvm *mvm, if (changes & BSS_CHANGED_BEACON && iwl_mvm_mac_ctxt_beacon_changed(mvm, vif)) IWL_WARN(mvm, "Failed updating beacon data\n"); + + if (changes & BSS_CHANGED_TXPOWER) { + IWL_DEBUG_CALIB(mvm, "Changing TX Power to %d\n", + bss_conf->txpower); + iwl_mvm_set_tx_power(mvm, vif, bss_conf->txpower); + } + } static void iwl_mvm_bss_info_changed(struct ieee80211_hw *hw, -- cgit v1.2.3 From a6cc5163149532734b84c86cbffa4994e527074b Mon Sep 17 00:00:00 2001 From: Matti Gottlieb Date: Mon, 29 Sep 2014 11:46:04 +0300 Subject: iwlwifi: mvm: ROC - bug fixes around time events and locking Don't add the time event to the list. We added it several times the same time event, which leads to an infinite loop when walking the list. Since we (currently) don't support more than one ROC for STA vif at a time, enforce this and don't add the time event to any list. We were also missing the locking of the mutex which led to a lockdep splat - fix that. Signed-off-by: Matti Gottlieb Signed-off-by: Emmanuel Grumbach --- drivers/net/wireless/iwlwifi/mvm/mac80211.c | 25 ++++++++++++++++--------- drivers/net/wireless/iwlwifi/mvm/time-event.c | 2 +- 2 files changed, 17 insertions(+), 10 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/iwlwifi/mvm/mac80211.c index 892a6bc26686..585fe5b7100f 100644 --- a/drivers/net/wireless/iwlwifi/mvm/mac80211.c +++ b/drivers/net/wireless/iwlwifi/mvm/mac80211.c @@ -526,7 +526,8 @@ static void iwl_mvm_mac_tx(struct ieee80211_hw *hw, } if (IEEE80211_SKB_CB(skb)->hw_queue == IWL_MVM_OFFCHANNEL_QUEUE && - !test_bit(IWL_MVM_STATUS_ROC_RUNNING, &mvm->status)) + !test_bit(IWL_MVM_STATUS_ROC_RUNNING, &mvm->status) && + !test_bit(IWL_MVM_STATUS_ROC_AUX_RUNNING, &mvm->status)) goto drop; /* treat non-bufferable MMPDUs as broadcast if sta is sleeping */ @@ -2374,14 +2375,19 @@ static int iwl_mvm_send_aux_roc_cmd(struct iwl_mvm *mvm, /* Set the node address */ memcpy(aux_roc_req.node_addr, vif->addr, ETH_ALEN); + lockdep_assert_held(&mvm->mutex); + + spin_lock_bh(&mvm->time_event_lock); + + if (WARN_ON(te_data->id == HOT_SPOT_CMD)) { + spin_unlock_bh(&mvm->time_event_lock); + return -EIO; + } + te_data->vif = vif; te_data->duration = duration; te_data->id = HOT_SPOT_CMD; - lockdep_assert_held(&mvm->mutex); - - spin_lock_bh(&mvm->time_event_lock); - list_add_tail(&te_data->list, &mvm->time_event_list); spin_unlock_bh(&mvm->time_event_lock); /* @@ -2437,22 +2443,23 @@ static int iwl_mvm_roc(struct ieee80211_hw *hw, IWL_DEBUG_MAC80211(mvm, "enter (%d, %d, %d)\n", channel->hw_value, duration, type); + mutex_lock(&mvm->mutex); + switch (vif->type) { case NL80211_IFTYPE_STATION: /* Use aux roc framework (HS20) */ ret = iwl_mvm_send_aux_roc_cmd(mvm, channel, vif, duration); - return ret; + goto out_unlock; case NL80211_IFTYPE_P2P_DEVICE: /* handle below */ break; default: IWL_ERR(mvm, "vif isn't P2P_DEVICE: %d\n", vif->type); - return -EINVAL; + ret = -EINVAL; + goto out_unlock; } - mutex_lock(&mvm->mutex); - for (i = 0; i < NUM_PHY_CTX; i++) { phy_ctxt = &mvm->phy_ctxts[i]; if (phy_ctxt->ref == 0 || mvmvif->phy_ctxt == phy_ctxt) diff --git a/drivers/net/wireless/iwlwifi/mvm/time-event.c b/drivers/net/wireless/iwlwifi/mvm/time-event.c index b7f9e61d14e2..6dfad230be5e 100644 --- a/drivers/net/wireless/iwlwifi/mvm/time-event.c +++ b/drivers/net/wireless/iwlwifi/mvm/time-event.c @@ -305,8 +305,8 @@ static int iwl_mvm_aux_roc_te_handle_notif(struct iwl_mvm *mvm, te_data->running = false; te_data->vif = NULL; te_data->uid = 0; + te_data->id = TE_MAX; } else if (le32_to_cpu(notif->action) == TE_V2_NOTIF_HOST_EVENT_START) { - set_bit(IWL_MVM_STATUS_ROC_RUNNING, &mvm->status); set_bit(IWL_MVM_STATUS_ROC_AUX_RUNNING, &mvm->status); te_data->running = true; ieee80211_ready_on_channel(mvm->hw); /* Start TE */ -- cgit v1.2.3 From a0855054e59b0c5b2b00237fdb5147f7bcc18efb Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Sun, 5 Oct 2014 09:11:14 +0300 Subject: iwlwifi: dvm: drop non VO frames when flushing When mac80211 wants to ensure that a frame is sent, it calls the flush() callback. Until now, iwldvm implemented this by waiting that all the frames are sent (ACKed or timeout). In case of weak signal, this can take a significant amount of time, delaying the next connection (in case of roaming). Many users have reported that the flush would take too long leading to the following error messages to be printed: iwlwifi 0000:03:00.0: fail to flush all tx fifo queues Q 2 iwlwifi 0000:03:00.0: Current SW read_ptr 161 write_ptr 201 iwl data: 00000000: 00 00 00 00 00 00 00 00 fe ff 01 00 00 00 00 00 [snip] iwlwifi 0000:03:00.0: FH TRBs(0) = 0x00000000 [snip] iwlwifi 0000:03:00.0: Q 0 is active and mapped to fifo 3 ra_tid 0x0000 [9,9] [snip] Instead of waiting for these packets, simply drop them. This significantly improves the responsiveness of the network. Note that all the queues are flushed, but the VO one. This is not typically used by the applications and it likely contains management frames that are useful for connection or roaming. This bug is tracked here: https://bugzilla.kernel.org/show_bug.cgi?id=56581 But it is duplicated in distributions' trackers. A simple search in Ubuntu's database led to these bugs: https://bugs.launchpad.net/ubuntu/+source/linux-firmware/+bug/1270808 https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1305406 https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1356236 https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1360597 https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1361809 Cc: Depends-on: 77be2c54c5bd ("mac80211: add vif to flush call") Signed-off-by: Emmanuel Grumbach --- drivers/net/wireless/iwlwifi/dvm/mac80211.c | 24 +++++++++++++----------- 1 file changed, 13 insertions(+), 11 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/dvm/mac80211.c b/drivers/net/wireless/iwlwifi/dvm/mac80211.c index 2364a3c09b9e..cae692ff1013 100644 --- a/drivers/net/wireless/iwlwifi/dvm/mac80211.c +++ b/drivers/net/wireless/iwlwifi/dvm/mac80211.c @@ -1095,6 +1095,7 @@ static void iwlagn_mac_flush(struct ieee80211_hw *hw, struct ieee80211_vif *vif, u32 queues, bool drop) { struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw); + u32 scd_queues; mutex_lock(&priv->mutex); IWL_DEBUG_MAC80211(priv, "enter\n"); @@ -1108,18 +1109,19 @@ static void iwlagn_mac_flush(struct ieee80211_hw *hw, struct ieee80211_vif *vif, goto done; } - /* - * mac80211 will not push any more frames for transmit - * until the flush is completed - */ - if (drop) { - IWL_DEBUG_MAC80211(priv, "send flush command\n"); - if (iwlagn_txfifo_flush(priv, 0)) { - IWL_ERR(priv, "flush request fail\n"); - goto done; - } + scd_queues = BIT(priv->cfg->base_params->num_of_queues) - 1; + scd_queues &= ~(BIT(IWL_IPAN_CMD_QUEUE_NUM) | + BIT(IWL_DEFAULT_CMD_QUEUE_NUM)); + + if (vif) + scd_queues &= ~BIT(vif->hw_queue[IEEE80211_AC_VO]); + + IWL_DEBUG_TX_QUEUES(priv, "Flushing SCD queues: 0x%x\n", scd_queues); + if (iwlagn_txfifo_flush(priv, scd_queues)) { + IWL_ERR(priv, "flush request fail\n"); + goto done; } - IWL_DEBUG_MAC80211(priv, "wait transmit/flush all frames\n"); + IWL_DEBUG_TX_QUEUES(priv, "wait transmit/flush all frames\n"); iwl_trans_wait_tx_queue_empty(priv->trans, 0xffffffff); done: mutex_unlock(&priv->mutex); -- cgit v1.2.3 From 1ffde699aae127e7abdb98dbdedc2cc6a973a1a1 Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Mon, 20 Oct 2014 08:29:55 +0300 Subject: Revert "iwlwifi: mvm: treat EAPOLs like mgmt frames wrt rate" This reverts commit aa11bbf3df026d6b1c6b528bef634fd9de7c2619. This commit was causing connection issues and is not needed if IWL_MVM_RS_RSSI_BASED_INIT_RATE is set to false by default. Regardless of the issues mentioned above, this patch added the following WARNING: WARNING: CPU: 0 PID: 3946 at drivers/net/wireless/iwlwifi/mvm/tx.c:190 iwl_mvm_set_tx_params+0x60a/0x6f0 [iwlmvm]() Got an HT rate for a non data frame 0x8 CPU: 0 PID: 3946 Comm: wpa_supplicant Tainted: G O 3.17.0+ #6 Hardware name: LENOVO 20ANCTO1WW/20ANCTO1WW, BIOS GLET71WW (2.25 ) 07/02/2014 0000000000000009 ffffffff814fa911 ffff8804288db8f8 ffffffff81064f52 0000000000001808 ffff8804288db948 ffff88040add8660 ffff8804291b5600 0000000000000000 ffffffff81064fb7 ffffffffa07b73d0 0000000000000020 Call Trace: [] ? dump_stack+0x41/0x51 [] ? warn_slowpath_common+0x72/0x90 [] ? warn_slowpath_fmt+0x47/0x50 [] ? iwl_mvm_set_tx_params+0x60a/0x6f0 [iwlmvm] [] ? iwl_mvm_tx_skb+0x48/0x3c0 [iwlmvm] [] ? iwl_mvm_mac_tx+0x7b/0x180 [iwlmvm] [] ? __ieee80211_tx+0x2b9/0x3c0 [mac80211] [] ? ieee80211_tx+0xb3/0x100 [mac80211] [] ? ieee80211_subif_start_xmit+0x459/0xca0 [mac80211] [] ? dev_hard_start_xmit+0x337/0x5f0 [] ? sch_direct_xmit+0x96/0x1f0 [] ? __dev_queue_xmit+0x203/0x4f0 [] ? ether_setup+0x70/0x70 [] ? packet_sendmsg+0xf81/0x1110 [] ? skb_free_datagram+0xc/0x40 [] ? sock_sendmsg+0x88/0xc0 [] ? move_addr_to_kernel.part.20+0x14/0x60 [] ? __inode_wait_for_writeback+0x62/0xb0 [] ? SYSC_sendto+0xf1/0x180 [] ? __sys_recvmsg+0x39/0x70 [] ? system_call_fastpath+0x1a/0x1f ---[ end trace cc19a150d311fc63 ]--- which was reported here: https://bugzilla.kernel.org/show_bug.cgi?id=85691 CC: [3.13+] Signed-off-by: Emmanuel Grumbach --- drivers/net/wireless/iwlwifi/mvm/tx.c | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/mvm/tx.c b/drivers/net/wireless/iwlwifi/mvm/tx.c index 1cb793a498ac..c6a517c771df 100644 --- a/drivers/net/wireless/iwlwifi/mvm/tx.c +++ b/drivers/net/wireless/iwlwifi/mvm/tx.c @@ -175,14 +175,10 @@ static void iwl_mvm_set_tx_cmd_rate(struct iwl_mvm *mvm, /* * for data packets, rate info comes from the table inside the fw. This - * table is controlled by LINK_QUALITY commands. Exclude ctrl port - * frames like EAPOLs which should be treated as mgmt frames. This - * avoids them being sent initially in high rates which increases the - * chances for completion of the 4-Way handshake. + * table is controlled by LINK_QUALITY commands */ - if (ieee80211_is_data(fc) && sta && - !(info->control.flags & IEEE80211_TX_CTRL_PORT_CTRL_PROTO)) { + if (ieee80211_is_data(fc) && sta) { tx_cmd->initial_rate_index = 0; tx_cmd->tx_flags |= cpu_to_le32(TX_CMD_FLG_STA_RATE); return; -- cgit v1.2.3 From 7f2ac8fb31896c9fb70dbd2a2e6642b79996fc13 Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Thu, 23 Oct 2014 08:53:21 +0300 Subject: iwlwifi: pcie: fix polling in various places iwl_poll_bit may return a strictly positive value when the poll doesn't match on the first try. This was caught when WoWLAN started failing upon resume even if the poll_bit actually succeeded. Also change a wrong print. If we reach the end of iwl_pcie_prepare_card_hw, it means that we couldn't get the devices. Reviewed-by: Johannes Berg Reviewed-by: Luciano Coelho Signed-off-by: Emmanuel Grumbach --- drivers/net/wireless/iwlwifi/pcie/trans.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/pcie/trans.c b/drivers/net/wireless/iwlwifi/pcie/trans.c index c706dba67cdd..3781b029e54a 100644 --- a/drivers/net/wireless/iwlwifi/pcie/trans.c +++ b/drivers/net/wireless/iwlwifi/pcie/trans.c @@ -430,7 +430,7 @@ static int iwl_pcie_apm_stop_master(struct iwl_trans *trans) ret = iwl_poll_bit(trans, CSR_RESET, CSR_RESET_REG_FLAG_MASTER_DISABLED, CSR_RESET_REG_FLAG_MASTER_DISABLED, 100); - if (ret) + if (ret < 0) IWL_WARN(trans, "Master Disable Timed Out, 100 usec\n"); IWL_DEBUG_INFO(trans, "stop master\n"); @@ -546,7 +546,7 @@ static int iwl_pcie_prepare_card_hw(struct iwl_trans *trans) msleep(25); } - IWL_DEBUG_INFO(trans, "got NIC after %d iterations\n", iter); + IWL_ERR(trans, "Couldn't prepare the card\n"); return ret; } @@ -1045,7 +1045,7 @@ static int iwl_trans_pcie_d3_resume(struct iwl_trans *trans, CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY, CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY, 25000); - if (ret) { + if (ret < 0) { IWL_ERR(trans, "Failed to resume the device (mac ready)\n"); return ret; } -- cgit v1.2.3