From 4b5ff469234b8ab5cd05f4a201cbb229896729d0 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Mon, 10 Mar 2008 17:16:32 -0700 Subject: PCI: doc/pci: create Documentation/PCI/ and move files into it Create Documentation/PCI/ and move PCI-related files to it. Fix a few instances of trailing whitespace. Update references to the new file locations. Signed-off-by: Randy Dunlap Cc: Jesse Barnes Signed-off-by: Greg Kroah-Hartman --- Documentation/PCI/PCIEBUS-HOWTO.txt | 217 ++++++++++++++++++++++++++++++++++++ 1 file changed, 217 insertions(+) create mode 100644 Documentation/PCI/PCIEBUS-HOWTO.txt (limited to 'Documentation/PCI/PCIEBUS-HOWTO.txt') diff --git a/Documentation/PCI/PCIEBUS-HOWTO.txt b/Documentation/PCI/PCIEBUS-HOWTO.txt new file mode 100644 index 000000000000..9a07e38631b0 --- /dev/null +++ b/Documentation/PCI/PCIEBUS-HOWTO.txt @@ -0,0 +1,217 @@ + The PCI Express Port Bus Driver Guide HOWTO + Tom L Nguyen tom.l.nguyen@intel.com + 11/03/2004 + +1. About this guide + +This guide describes the basics of the PCI Express Port Bus driver +and provides information on how to enable the service drivers to +register/unregister with the PCI Express Port Bus Driver. + +2. Copyright 2004 Intel Corporation + +3. What is the PCI Express Port Bus Driver + +A PCI Express Port is a logical PCI-PCI Bridge structure. There +are two types of PCI Express Port: the Root Port and the Switch +Port. The Root Port originates a PCI Express link from a PCI Express +Root Complex and the Switch Port connects PCI Express links to +internal logical PCI buses. The Switch Port, which has its secondary +bus representing the switch's internal routing logic, is called the +switch's Upstream Port. The switch's Downstream Port is bridging from +switch's internal routing bus to a bus representing the downstream +PCI Express link from the PCI Express Switch. + +A PCI Express Port can provide up to four distinct functions, +referred to in this document as services, depending on its port type. +PCI Express Port's services include native hotplug support (HP), +power management event support (PME), advanced error reporting +support (AER), and virtual channel support (VC). These services may +be handled by a single complex driver or be individually distributed +and handled by corresponding service drivers. + +4. Why use the PCI Express Port Bus Driver? + +In existing Linux kernels, the Linux Device Driver Model allows a +physical device to be handled by only a single driver. The PCI +Express Port is a PCI-PCI Bridge device with multiple distinct +services. To maintain a clean and simple solution each service +may have its own software service driver. In this case several +service drivers will compete for a single PCI-PCI Bridge device. +For example, if the PCI Express Root Port native hotplug service +driver is loaded first, it claims a PCI-PCI Bridge Root Port. The +kernel therefore does not load other service drivers for that Root +Port. In other words, it is impossible to have multiple service +drivers load and run on a PCI-PCI Bridge device simultaneously +using the current driver model. + +To enable multiple service drivers running simultaneously requires +having a PCI Express Port Bus driver, which manages all populated +PCI Express Ports and distributes all provided service requests +to the corresponding service drivers as required. Some key +advantages of using the PCI Express Port Bus driver are listed below: + + - Allow multiple service drivers to run simultaneously on + a PCI-PCI Bridge Port device. + + - Allow service drivers implemented in an independent + staged approach. + + - Allow one service driver to run on multiple PCI-PCI Bridge + Port devices. + + - Manage and distribute resources of a PCI-PCI Bridge Port + device to requested service drivers. + +5. Configuring the PCI Express Port Bus Driver vs. Service Drivers + +5.1 Including the PCI Express Port Bus Driver Support into the Kernel + +Including the PCI Express Port Bus driver depends on whether the PCI +Express support is included in the kernel config. The kernel will +automatically include the PCI Express Port Bus driver as a kernel +driver when the PCI Express support is enabled in the kernel. + +5.2 Enabling Service Driver Support + +PCI device drivers are implemented based on Linux Device Driver Model. +All service drivers are PCI device drivers. As discussed above, it is +impossible to load any service driver once the kernel has loaded the +PCI Express Port Bus Driver. To meet the PCI Express Port Bus Driver +Model requires some minimal changes on existing service drivers that +imposes no impact on the functionality of existing service drivers. + +A service driver is required to use the two APIs shown below to +register its service with the PCI Express Port Bus driver (see +section 5.2.1 & 5.2.2). It is important that a service driver +initializes the pcie_port_service_driver data structure, included in +header file /include/linux/pcieport_if.h, before calling these APIs. +Failure to do so will result an identity mismatch, which prevents +the PCI Express Port Bus driver from loading a service driver. + +5.2.1 pcie_port_service_register + +int pcie_port_service_register(struct pcie_port_service_driver *new) + +This API replaces the Linux Driver Model's pci_module_init API. A +service driver should always calls pcie_port_service_register at +module init. Note that after service driver being loaded, calls +such as pci_enable_device(dev) and pci_set_master(dev) are no longer +necessary since these calls are executed by the PCI Port Bus driver. + +5.2.2 pcie_port_service_unregister + +void pcie_port_service_unregister(struct pcie_port_service_driver *new) + +pcie_port_service_unregister replaces the Linux Driver Model's +pci_unregister_driver. It's always called by service driver when a +module exits. + +5.2.3 Sample Code + +Below is sample service driver code to initialize the port service +driver data structure. + +static struct pcie_port_service_id service_id[] = { { + .vendor = PCI_ANY_ID, + .device = PCI_ANY_ID, + .port_type = PCIE_RC_PORT, + .service_type = PCIE_PORT_SERVICE_AER, + }, { /* end: all zeroes */ } +}; + +static struct pcie_port_service_driver root_aerdrv = { + .name = (char *)device_name, + .id_table = &service_id[0], + + .probe = aerdrv_load, + .remove = aerdrv_unload, + + .suspend = aerdrv_suspend, + .resume = aerdrv_resume, +}; + +Below is a sample code for registering/unregistering a service +driver. + +static int __init aerdrv_service_init(void) +{ + int retval = 0; + + retval = pcie_port_service_register(&root_aerdrv); + if (!retval) { + /* + * FIX ME + */ + } + return retval; +} + +static void __exit aerdrv_service_exit(void) +{ + pcie_port_service_unregister(&root_aerdrv); +} + +module_init(aerdrv_service_init); +module_exit(aerdrv_service_exit); + +6. Possible Resource Conflicts + +Since all service drivers of a PCI-PCI Bridge Port device are +allowed to run simultaneously, below lists a few of possible resource +conflicts with proposed solutions. + +6.1 MSI Vector Resource + +The MSI capability structure enables a device software driver to call +pci_enable_msi to request MSI based interrupts. Once MSI interrupts +are enabled on a device, it stays in this mode until a device driver +calls pci_disable_msi to disable MSI interrupts and revert back to +INTx emulation mode. Since service drivers of the same PCI-PCI Bridge +port share the same physical device, if an individual service driver +calls pci_enable_msi/pci_disable_msi it may result unpredictable +behavior. For example, two service drivers run simultaneously on the +same physical Root Port. Both service drivers call pci_enable_msi to +request MSI based interrupts. A service driver may not know whether +any other service drivers have run on this Root Port. If either one +of them calls pci_disable_msi, it puts the other service driver +in a wrong interrupt mode. + +To avoid this situation all service drivers are not permitted to +switch interrupt mode on its device. The PCI Express Port Bus driver +is responsible for determining the interrupt mode and this should be +transparent to service drivers. Service drivers need to know only +the vector IRQ assigned to the field irq of struct pcie_device, which +is passed in when the PCI Express Port Bus driver probes each service +driver. Service drivers should use (struct pcie_device*)dev->irq to +call request_irq/free_irq. In addition, the interrupt mode is stored +in the field interrupt_mode of struct pcie_device. + +6.2 MSI-X Vector Resources + +Similar to the MSI a device driver for an MSI-X capable device can +call pci_enable_msix to request MSI-X interrupts. All service drivers +are not permitted to switch interrupt mode on its device. The PCI +Express Port Bus driver is responsible for determining the interrupt +mode and this should be transparent to service drivers. Any attempt +by service driver to call pci_enable_msix/pci_disable_msix may +result unpredictable behavior. Service drivers should use +(struct pcie_device*)dev->irq and call request_irq/free_irq. + +6.3 PCI Memory/IO Mapped Regions + +Service drivers for PCI Express Power Management (PME), Advanced +Error Reporting (AER), Hot-Plug (HP) and Virtual Channel (VC) access +PCI configuration space on the PCI Express port. In all cases the +registers accessed are independent of each other. This patch assumes +that all service drivers will be well behaved and not overwrite +other service driver's configuration settings. + +6.4 PCI Config Registers + +Each service driver runs its PCI config operations on its own +capability structure except the PCI Express capability structure, in +which Root Control register and Device Control register are shared +between PME and AER. This patch assumes that all service drivers +will be well behaved and not overwrite other service driver's +configuration settings. -- cgit v1.2.3