From f88321a3bf775649c685379a25fb9f3f79836bfd Mon Sep 17 00:00:00 2001
From: Rob Herring <robh@kernel.org>
Date: Tue, 13 Jul 2021 13:35:14 -0600
Subject: dt-bindings: Move fixed string 'patternProperties' to 'properties'

There's no need for fixed strings to be under 'patternProperties', so move
them under 'properties' instead.

Cc: Jean Delvare <jdelvare@suse.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Kishon Vijay Abraham I <kishon@ti.com>
Cc: Vinod Koul <vkoul@kernel.org>
Cc: Saravanan Sekar <sravanhome@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Troy Kisky <troy.kisky@boundarydevices.com>
Cc: linux-hwmon@vger.kernel.org
Cc: linux-phy@lists.infradead.org
Cc: linux-spi@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20210713193514.690894-1-robh@kernel.org
---
 .../devicetree/bindings/hwmon/adt7475.yaml         | 22 +++++++++++-----------
 1 file changed, 11 insertions(+), 11 deletions(-)

(limited to 'Documentation/devicetree/bindings/hwmon')

diff --git a/Documentation/devicetree/bindings/hwmon/adt7475.yaml b/Documentation/devicetree/bindings/hwmon/adt7475.yaml
index ad0ec9f35bd8..7d9c083632b9 100644
--- a/Documentation/devicetree/bindings/hwmon/adt7475.yaml
+++ b/Documentation/devicetree/bindings/hwmon/adt7475.yaml
@@ -39,17 +39,7 @@ properties:
   reg:
     maxItems: 1
 
-patternProperties:
-  "^adi,bypass-attenuator-in[0-4]$":
-    description: |
-      Configures bypassing the individual voltage input attenuator. If
-      set to 1 the attenuator is bypassed if set to 0 the attenuator is
-      not bypassed. If the property is absent then the attenuator
-      retains it's configuration from the bios/bootloader.
-    $ref: /schemas/types.yaml#/definitions/uint32
-    enum: [0, 1]
-
-  "^adi,pwm-active-state$":
+  adi,pwm-active-state:
     description: |
       Integer array, represents the active state of the pwm outputs If set to 0
       the pwm uses a logic low output for 100% duty cycle. If set to 1 the pwm
@@ -61,6 +51,16 @@ patternProperties:
       enum: [0, 1]
       default: 1
 
+patternProperties:
+  "^adi,bypass-attenuator-in[0-4]$":
+    description: |
+      Configures bypassing the individual voltage input attenuator. If
+      set to 1 the attenuator is bypassed if set to 0 the attenuator is
+      not bypassed. If the property is absent then the attenuator
+      retains it's configuration from the bios/bootloader.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1]
+
 required:
   - compatible
   - reg
-- 
cgit v1.2.3