From c28c99e7741f848ffe808a578b265dd2bb23a52f Mon Sep 17 00:00:00 2001 From: Sylwester Nawrocki Date: Wed, 8 May 2013 14:24:14 -0300 Subject: [media] exynos4-is: Fix example dts in .../bindings/samsung-fimc.txt The s5c73m3 sensor node should be off an I2C bus controller node. Signed-off-by: Sylwester Nawrocki Signed-off-by: Kyungmin Park Signed-off-by: Mauro Carvalho Chehab --- .../devicetree/bindings/media/samsung-fimc.txt | 26 +++++++++++----------- 1 file changed, 13 insertions(+), 13 deletions(-) (limited to 'Documentation/devicetree/bindings/media') diff --git a/Documentation/devicetree/bindings/media/samsung-fimc.txt b/Documentation/devicetree/bindings/media/samsung-fimc.txt index 51c776b7f7a3..96312f6c4c26 100644 --- a/Documentation/devicetree/bindings/media/samsung-fimc.txt +++ b/Documentation/devicetree/bindings/media/samsung-fimc.txt @@ -127,22 +127,22 @@ Example: }; }; }; - }; - /* MIPI CSI-2 bus IF sensor */ - s5c73m3: sensor@0x1a { - compatible = "samsung,s5c73m3"; - reg = <0x1a>; - vddio-supply = <...>; + /* MIPI CSI-2 bus IF sensor */ + s5c73m3: sensor@0x1a { + compatible = "samsung,s5c73m3"; + reg = <0x1a>; + vddio-supply = <...>; - clock-frequency = <24000000>; - clocks = <...>; - clock-names = "mclk"; + clock-frequency = <24000000>; + clocks = <...>; + clock-names = "mclk"; - port { - s5c73m3_1: endpoint { - data-lanes = <1 2 3 4>; - remote-endpoint = <&csis0_ep>; + port { + s5c73m3_1: endpoint { + data-lanes = <1 2 3 4>; + remote-endpoint = <&csis0_ep>; + }; }; }; }; -- cgit v1.2.3 From 8d4da37c3006f30a7cf75cd7bb33b254afc30279 Mon Sep 17 00:00:00 2001 From: "Lad, Prabhakar" Date: Sun, 26 May 2013 10:08:54 -0300 Subject: [media] media: i2c: mt9p031: add OF support Add OF support for the mt9p031 sensor driver. Alongside this patch sorts the header inclusion alphabetically. Signed-off-by: Lad, Prabhakar Reviewed-by: Sascha Hauer Signed-off-by: Laurent Pinchart Signed-off-by: Mauro Carvalho Chehab --- .../devicetree/bindings/media/i2c/mt9p031.txt | 40 +++++++++++++++++++++ drivers/media/i2c/mt9p031.c | 42 ++++++++++++++++++++-- 2 files changed, 80 insertions(+), 2 deletions(-) create mode 100644 Documentation/devicetree/bindings/media/i2c/mt9p031.txt (limited to 'Documentation/devicetree/bindings/media') diff --git a/Documentation/devicetree/bindings/media/i2c/mt9p031.txt b/Documentation/devicetree/bindings/media/i2c/mt9p031.txt new file mode 100644 index 000000000000..cb60443ff78f --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/mt9p031.txt @@ -0,0 +1,40 @@ +* Aptina 1/2.5-Inch 5Mp CMOS Digital Image Sensor + +The Aptina MT9P031 is a 1/2.5-inch CMOS active pixel digital image sensor with +an active array size of 2592H x 1944V. It is programmable through a simple +two-wire serial interface. + +Required Properties: +- compatible: value should be either one among the following + (a) "aptina,mt9p031" for mt9p031 sensor + (b) "aptina,mt9p031m" for mt9p031m sensor + +- input-clock-frequency: Input clock frequency. + +- pixel-clock-frequency: Pixel clock frequency. + +Optional Properties: +- reset-gpios: Chip reset GPIO + +For further reading on port node refer to +Documentation/devicetree/bindings/media/video-interfaces.txt. + +Example: + + i2c0@1c22000 { + ... + ... + mt9p031@5d { + compatible = "aptina,mt9p031"; + reg = <0x5d>; + reset-gpios = <&gpio3 30 0>; + + port { + mt9p031_1: endpoint { + input-clock-frequency = <6000000>; + pixel-clock-frequency = <96000000>; + }; + }; + }; + ... + }; diff --git a/drivers/media/i2c/mt9p031.c b/drivers/media/i2c/mt9p031.c index fe3414866a63..1abc86ed2255 100644 --- a/drivers/media/i2c/mt9p031.c +++ b/drivers/media/i2c/mt9p031.c @@ -16,9 +16,10 @@ #include #include #include -#include #include #include +#include +#include #include #include #include @@ -27,6 +28,7 @@ #include #include #include +#include #include #include "aptina-pll.h" @@ -927,10 +929,36 @@ static const struct v4l2_subdev_internal_ops mt9p031_subdev_internal_ops = { * Driver initialization and probing */ +static struct mt9p031_platform_data * +mt9p031_get_pdata(struct i2c_client *client) +{ + struct mt9p031_platform_data *pdata; + struct device_node *np; + + if (!IS_ENABLED(CONFIG_OF) || !client->dev.of_node) + return client->dev.platform_data; + + np = v4l2_of_get_next_endpoint(client->dev.of_node, NULL); + if (!np) + return NULL; + + pdata = devm_kzalloc(&client->dev, sizeof(*pdata), GFP_KERNEL); + if (!pdata) + goto done; + + pdata->reset = of_get_named_gpio(client->dev.of_node, "reset-gpios", 0); + of_property_read_u32(np, "input-clock-frequency", &pdata->ext_freq); + of_property_read_u32(np, "pixel-clock-frequency", &pdata->target_freq); + +done: + of_node_put(np); + return pdata; +} + static int mt9p031_probe(struct i2c_client *client, const struct i2c_device_id *did) { - struct mt9p031_platform_data *pdata = client->dev.platform_data; + struct mt9p031_platform_data *pdata = mt9p031_get_pdata(client); struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent); struct mt9p031 *mt9p031; unsigned int i; @@ -1069,8 +1097,18 @@ static const struct i2c_device_id mt9p031_id[] = { }; MODULE_DEVICE_TABLE(i2c, mt9p031_id); +#if IS_ENABLED(CONFIG_OF) +static const struct of_device_id mt9p031_of_match[] = { + { .compatible = "aptina,mt9p031", }, + { .compatible = "aptina,mt9p031m", }, + { /* sentinel */ }, +}; +MODULE_DEVICE_TABLE(of, mt9p031_of_match); +#endif + static struct i2c_driver mt9p031_i2c_driver = { .driver = { + .of_match_table = of_match_ptr(mt9p031_of_match), .name = "mt9p031", }, .probe = mt9p031_probe, -- cgit v1.2.3 From b610b5928dc04095b9b24b83e4ddbb399d933611 Mon Sep 17 00:00:00 2001 From: "Lad, Prabhakar" Date: Tue, 4 Jun 2013 12:26:23 -0300 Subject: [media] media: i2c: tvp514x: add OF support add OF support for the tvp514x driver. Signed-off-by: Lad, Prabhakar Acked-by: Laurent Pinchart Cc: Hans Verkuil Cc: Mauro Carvalho Chehab Cc: Guennadi Liakhovetski Cc: Sylwester Nawrocki Cc: Sakari Ailus Cc: Grant Likely Cc: Rob Herring Cc: Rob Landley Cc: devicetree-discuss@lists.ozlabs.org Cc: linux-doc@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: davinci-linux-open-source@linux.davincidsp.com Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- .../devicetree/bindings/media/i2c/tvp514x.txt | 44 +++++++++++++++ drivers/media/i2c/tvp514x.c | 62 +++++++++++++++++++--- 2 files changed, 100 insertions(+), 6 deletions(-) create mode 100644 Documentation/devicetree/bindings/media/i2c/tvp514x.txt (limited to 'Documentation/devicetree/bindings/media') diff --git a/Documentation/devicetree/bindings/media/i2c/tvp514x.txt b/Documentation/devicetree/bindings/media/i2c/tvp514x.txt new file mode 100644 index 000000000000..46752cc71f2e --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/tvp514x.txt @@ -0,0 +1,44 @@ +* Texas Instruments TVP514x video decoder + +The TVP5146/TVP5146m2/TVP5147/TVP5147m1 device is high quality, single-chip +digital video decoder that digitizes and decodes all popular baseband analog +video formats into digital video component. The tvp514x decoder supports analog- +to-digital (A/D) conversion of component RGB and YPbPr signals as well as A/D +conversion and decoding of NTSC, PAL and SECAM composite and S-video into +component YCbCr. + +Required Properties : +- compatible : value should be either one among the following + (a) "ti,tvp5146" for tvp5146 decoder. + (b) "ti,tvp5146m2" for tvp5146m2 decoder. + (c) "ti,tvp5147" for tvp5147 decoder. + (d) "ti,tvp5147m1" for tvp5147m1 decoder. + +- hsync-active: HSYNC Polarity configuration for endpoint. + +- vsync-active: VSYNC Polarity configuration for endpoint. + +- pclk-sample: Clock polarity of the endpoint. + +For further reading on port node refer to Documentation/devicetree/bindings/ +media/video-interfaces.txt. + +Example: + + i2c0@1c22000 { + ... + ... + tvp514x@5c { + compatible = "ti,tvp5146"; + reg = <0x5c>; + + port { + tvp514x_1: endpoint { + hsync-active = <1>; + vsync-active = <1>; + pclk-sample = <0>; + }; + }; + }; + ... + }; diff --git a/drivers/media/i2c/tvp514x.c b/drivers/media/i2c/tvp514x.c index b8061b5e3eac..864eb14ae9b1 100644 --- a/drivers/media/i2c/tvp514x.c +++ b/drivers/media/i2c/tvp514x.c @@ -39,6 +39,7 @@ #include #include #include +#include #include #include #include @@ -1056,6 +1057,42 @@ static struct tvp514x_decoder tvp514x_dev = { }; +static struct tvp514x_platform_data * +tvp514x_get_pdata(struct i2c_client *client) +{ + struct tvp514x_platform_data *pdata; + struct v4l2_of_endpoint bus_cfg; + struct device_node *endpoint; + unsigned int flags; + + if (!IS_ENABLED(CONFIG_OF) || !client->dev.of_node) + return client->dev.platform_data; + + endpoint = v4l2_of_get_next_endpoint(client->dev.of_node, NULL); + if (!endpoint) + return NULL; + + pdata = devm_kzalloc(&client->dev, sizeof(*pdata), GFP_KERNEL); + if (!pdata) + goto done; + + v4l2_of_parse_endpoint(endpoint, &bus_cfg); + flags = bus_cfg.bus.parallel.flags; + + if (flags & V4L2_MBUS_HSYNC_ACTIVE_HIGH) + pdata->hs_polarity = 1; + + if (flags & V4L2_MBUS_VSYNC_ACTIVE_HIGH) + pdata->vs_polarity = 1; + + if (flags & V4L2_MBUS_PCLK_SAMPLE_RISING) + pdata->clk_polarity = 1; + +done: + of_node_put(endpoint); + return pdata; +} + /** * tvp514x_probe() - decoder driver i2c probe handler * @client: i2c driver client device structure @@ -1067,19 +1104,20 @@ static struct tvp514x_decoder tvp514x_dev = { static int tvp514x_probe(struct i2c_client *client, const struct i2c_device_id *id) { + struct tvp514x_platform_data *pdata = tvp514x_get_pdata(client); struct tvp514x_decoder *decoder; struct v4l2_subdev *sd; int ret; + if (pdata == NULL) { + dev_err(&client->dev, "No platform data\n"); + return -EINVAL; + } + /* Check if the adapter supports the needed features */ if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) return -EIO; - if (!client->dev.platform_data) { - v4l2_err(client, "No platform data!!\n"); - return -ENODEV; - } - decoder = devm_kzalloc(&client->dev, sizeof(*decoder), GFP_KERNEL); if (!decoder) return -ENOMEM; @@ -1091,7 +1129,7 @@ tvp514x_probe(struct i2c_client *client, const struct i2c_device_id *id) sizeof(tvp514x_reg_list_default)); /* Copy board specific information here */ - decoder->pdata = client->dev.platform_data; + decoder->pdata = pdata; /** * Fetch platform specific data, and configure the @@ -1231,8 +1269,20 @@ static const struct i2c_device_id tvp514x_id[] = { MODULE_DEVICE_TABLE(i2c, tvp514x_id); +#if IS_ENABLED(CONFIG_OF) +static const struct of_device_id tvp514x_of_match[] = { + { .compatible = "ti,tvp5146", }, + { .compatible = "ti,tvp5146m2", }, + { .compatible = "ti,tvp5147", }, + { .compatible = "ti,tvp5147m1", }, + { /* sentinel */ }, +}; +MODULE_DEVICE_TABLE(of, tvp514x_of_match); +#endif + static struct i2c_driver tvp514x_driver = { .driver = { + .of_match_table = of_match_ptr(tvp514x_of_match), .owner = THIS_MODULE, .name = TVP514X_MODULE_NAME, }, -- cgit v1.2.3 From 812e8b22ea55218449de310a666dd1ce16f924ed Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Mon, 17 Sep 2012 07:48:33 -0300 Subject: [media] sh-mobile-ceu-driver: support max width and height in DT Some CEU implementations have non-standard (larger) maximum supported width and height values. Add two OF properties to specify them. Signed-off-by: Guennadi Liakhovetski Acked-by: Hans Verkuil Acked-by: Laurent Pinchart Signed-off-by: Mauro Carvalho Chehab --- .../devicetree/bindings/media/sh_mobile_ceu.txt | 18 +++++++++++++++++ .../platform/soc_camera/sh_mobile_ceu_camera.c | 23 ++++++++++++++++++++-- 2 files changed, 39 insertions(+), 2 deletions(-) create mode 100644 Documentation/devicetree/bindings/media/sh_mobile_ceu.txt (limited to 'Documentation/devicetree/bindings/media') diff --git a/Documentation/devicetree/bindings/media/sh_mobile_ceu.txt b/Documentation/devicetree/bindings/media/sh_mobile_ceu.txt new file mode 100644 index 000000000000..1ce4e46bcbb7 --- /dev/null +++ b/Documentation/devicetree/bindings/media/sh_mobile_ceu.txt @@ -0,0 +1,18 @@ +Bindings, specific for the sh_mobile_ceu_camera.c driver: + - compatible: Should be "renesas,sh-mobile-ceu" + - reg: register base and size + - interrupts: the interrupt number + - interrupt-parent: the interrupt controller + - renesas,max-width: maximum image width, supported on this SoC + - renesas,max-height: maximum image height, supported on this SoC + +Example: + +ceu0: ceu@0xfe910000 { + compatible = "renesas,sh-mobile-ceu"; + reg = <0xfe910000 0xa0>; + interrupt-parent = <&intcs>; + interrupts = <0x880>; + renesas,max-width = <8188>; + renesas,max-height = <8188>; +}; diff --git a/drivers/media/platform/soc_camera/sh_mobile_ceu_camera.c b/drivers/media/platform/soc_camera/sh_mobile_ceu_camera.c index fcc13d8eb070..b0f0995fc80b 100644 --- a/drivers/media/platform/soc_camera/sh_mobile_ceu_camera.c +++ b/drivers/media/platform/soc_camera/sh_mobile_ceu_camera.c @@ -2116,11 +2116,30 @@ static int sh_mobile_ceu_probe(struct platform_device *pdev) /* TODO: implement per-device bus flags */ if (pcdev->pdata) { - pcdev->max_width = pcdev->pdata->max_width ? : 2560; - pcdev->max_height = pcdev->pdata->max_height ? : 1920; + pcdev->max_width = pcdev->pdata->max_width; + pcdev->max_height = pcdev->pdata->max_height; pcdev->flags = pcdev->pdata->flags; } + if (!pcdev->max_width) { + unsigned int v; + err = of_property_read_u32(pdev->dev.of_node, "renesas,max-width", &v); + if (!err) + pcdev->max_width = v; + + if (!pcdev->max_width) + pcdev->max_width = 2560; + } + if (!pcdev->max_height) { + unsigned int v; + err = of_property_read_u32(pdev->dev.of_node, "renesas,max-height", &v); + if (!err) + pcdev->max_height = v; + + if (!pcdev->max_height) + pcdev->max_height = 1920; + } + base = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(base)) return PTR_ERR(base); -- cgit v1.2.3 From 086eca2905d0d1ea6b5e22d62648c6b818c51846 Mon Sep 17 00:00:00 2001 From: Sylwester Nawrocki Date: Fri, 14 Jun 2013 12:38:15 -0300 Subject: [media] exynos4-is: Add Exynos5250 SoC support to fimc-lite driver This patch adds support for the Exynos5250 SoC variant of the FIMC-LITE IP. A 'compatible' string is added for Exynos5250 compatible devices and the capture DMA handling is reworked to use the FLITE_REG_CIFCNTSEQ register, masking output DMA buffer address slots. The frame interrupt is enabled so there are now 2 interrupts per frame. This likely can be optimized in future by using any status registers that allow to figure out what the last and the currently written frame buffer is. It would also be more reliable in cases where there are high interrupt service latencies. Signed-off-by: Shaik Ameer Basha Signed-off-by: Arun Kumar K Signed-off-by: Sylwester Nawrocki Signed-off-by: Kyungmin Park --- .../devicetree/bindings/media/exynos-fimc-lite.txt | 6 ++- drivers/media/platform/exynos4-is/fimc-lite-reg.c | 53 ++++++++++++++++++++-- drivers/media/platform/exynos4-is/fimc-lite-reg.h | 10 +++- drivers/media/platform/exynos4-is/fimc-lite.c | 50 +++++++++++++++++--- drivers/media/platform/exynos4-is/fimc-lite.h | 22 ++++++++- 5 files changed, 125 insertions(+), 16 deletions(-) (limited to 'Documentation/devicetree/bindings/media') diff --git a/Documentation/devicetree/bindings/media/exynos-fimc-lite.txt b/Documentation/devicetree/bindings/media/exynos-fimc-lite.txt index de9f6b78ee51..0bf6fb7fbeab 100644 --- a/Documentation/devicetree/bindings/media/exynos-fimc-lite.txt +++ b/Documentation/devicetree/bindings/media/exynos-fimc-lite.txt @@ -2,8 +2,10 @@ Exynos4x12/Exynos5 SoC series camera host interface (FIMC-LITE) Required properties: -- compatible : should be "samsung,exynos4212-fimc-lite" for Exynos4212 and - Exynos4412 SoCs; +- compatible : should be one of: + "samsung,exynos4212-fimc-lite" for Exynos4212/4412 SoCs, + "samsung,exynos5250-fimc-lite" for Exynos5250 compatible + devices; - reg : physical base address and size of the device memory mapped registers; - interrupts : should contain FIMC-LITE interrupt; diff --git a/drivers/media/platform/exynos4-is/fimc-lite-reg.c b/drivers/media/platform/exynos4-is/fimc-lite-reg.c index eb4f7635f5e0..72a343e3b5e8 100644 --- a/drivers/media/platform/exynos4-is/fimc-lite-reg.c +++ b/drivers/media/platform/exynos4-is/fimc-lite-reg.c @@ -2,15 +2,16 @@ * Register interface file for EXYNOS FIMC-LITE (camera interface) driver * * Copyright (C) 2012 Samsung Electronics Co., Ltd. - * Sylwester Nawrocki + * Author: Sylwester Nawrocki * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ -#include +#include #include +#include #include #include "fimc-lite-reg.h" @@ -68,7 +69,8 @@ void flite_hw_set_interrupt_mask(struct fimc_lite *dev) if (atomic_read(&dev->out_path) == FIMC_IO_DMA) { intsrc = FLITE_REG_CIGCTRL_IRQ_OVFEN | FLITE_REG_CIGCTRL_IRQ_LASTEN | - FLITE_REG_CIGCTRL_IRQ_STARTEN; + FLITE_REG_CIGCTRL_IRQ_STARTEN | + FLITE_REG_CIGCTRL_IRQ_ENDEN; } else { /* An output to the FIMC-IS */ intsrc = FLITE_REG_CIGCTRL_IRQ_OVFEN | @@ -215,6 +217,18 @@ void flite_hw_set_camera_bus(struct fimc_lite *dev, flite_hw_set_camera_port(dev, si->mux_id); } +static void flite_hw_set_pack12(struct fimc_lite *dev, int on) +{ + u32 cfg = readl(dev->regs + FLITE_REG_CIODMAFMT); + + cfg &= ~FLITE_REG_CIODMAFMT_PACK12; + + if (on) + cfg |= FLITE_REG_CIODMAFMT_PACK12; + + writel(cfg, dev->regs + FLITE_REG_CIODMAFMT); +} + static void flite_hw_set_out_order(struct fimc_lite *dev, struct flite_frame *f) { static const u32 pixcode[4][2] = { @@ -250,6 +264,38 @@ void flite_hw_set_dma_window(struct fimc_lite *dev, struct flite_frame *f) writel(cfg, dev->regs + FLITE_REG_CIOOFF); } +void flite_hw_set_dma_buffer(struct fimc_lite *dev, struct flite_buffer *buf) +{ + unsigned int index; + u32 cfg; + + if (dev->dd->max_dma_bufs == 1) + index = 0; + else + index = buf->index; + + if (index == 0) + writel(buf->paddr, dev->regs + FLITE_REG_CIOSA); + else + writel(buf->paddr, dev->regs + FLITE_REG_CIOSAN(index - 1)); + + cfg = readl(dev->regs + FLITE_REG_CIFCNTSEQ); + cfg |= BIT(index); + writel(cfg, dev->regs + FLITE_REG_CIFCNTSEQ); +} + +void flite_hw_mask_dma_buffer(struct fimc_lite *dev, u32 index) +{ + u32 cfg; + + if (dev->dd->max_dma_bufs == 1) + index = 0; + + cfg = readl(dev->regs + FLITE_REG_CIFCNTSEQ); + cfg &= ~BIT(index); + writel(cfg, dev->regs + FLITE_REG_CIFCNTSEQ); +} + /* Enable/disable output DMA, set output pixel size and offsets (composition) */ void flite_hw_set_output_dma(struct fimc_lite *dev, struct flite_frame *f, bool enable) @@ -267,6 +313,7 @@ void flite_hw_set_output_dma(struct fimc_lite *dev, struct flite_frame *f, flite_hw_set_out_order(dev, f); flite_hw_set_dma_window(dev, f); + flite_hw_set_pack12(dev, 0); } void flite_hw_dump_regs(struct fimc_lite *dev, const char *label) diff --git a/drivers/media/platform/exynos4-is/fimc-lite-reg.h b/drivers/media/platform/exynos4-is/fimc-lite-reg.h index 390383941c19..10a7d7bbcc27 100644 --- a/drivers/media/platform/exynos4-is/fimc-lite-reg.h +++ b/drivers/media/platform/exynos4-is/fimc-lite-reg.h @@ -120,6 +120,9 @@ /* b0: 1 - camera B, 0 - camera A */ #define FLITE_REG_CIGENERAL_CAM_B (1 << 0) +#define FLITE_REG_CIFCNTSEQ 0x100 +#define FLITE_REG_CIOSAN(x) (0x200 + (4 * (x))) + /* ---------------------------------------------------------------------------- * Function declarations */ @@ -142,9 +145,12 @@ void flite_hw_set_output_dma(struct fimc_lite *dev, struct flite_frame *f, void flite_hw_set_dma_window(struct fimc_lite *dev, struct flite_frame *f); void flite_hw_set_test_pattern(struct fimc_lite *dev, bool on); void flite_hw_dump_regs(struct fimc_lite *dev, const char *label); +void flite_hw_set_dma_buffer(struct fimc_lite *dev, struct flite_buffer *buf); +void flite_hw_mask_dma_buffer(struct fimc_lite *dev, u32 index); -static inline void flite_hw_set_output_addr(struct fimc_lite *dev, u32 paddr) +static inline void flite_hw_set_dma_buf_mask(struct fimc_lite *dev, u32 mask) { - writel(paddr, dev->regs + FLITE_REG_CIOSA); + writel(mask, dev->regs + FLITE_REG_CIFCNTSEQ); } + #endif /* FIMC_LITE_REG_H */ diff --git a/drivers/media/platform/exynos4-is/fimc-lite.c b/drivers/media/platform/exynos4-is/fimc-lite.c index 00c525c377d8..07767c8b1c62 100644 --- a/drivers/media/platform/exynos4-is/fimc-lite.c +++ b/drivers/media/platform/exynos4-is/fimc-lite.c @@ -153,6 +153,7 @@ static int fimc_lite_hw_init(struct fimc_lite *fimc, bool isp_output) flite_hw_set_camera_bus(fimc, si); flite_hw_set_source_format(fimc, &fimc->inp_frame); flite_hw_set_window_offset(fimc, &fimc->inp_frame); + flite_hw_set_dma_buf_mask(fimc, 0); flite_hw_set_output_dma(fimc, &fimc->out_frame, !isp_output); flite_hw_set_interrupt_mask(fimc); flite_hw_set_test_pattern(fimc, fimc->test_pattern->val); @@ -276,19 +277,23 @@ static irqreturn_t flite_irq_handler(int irq, void *priv) if ((intsrc & FLITE_REG_CISTATUS_IRQ_SRC_FRMSTART) && test_bit(ST_FLITE_RUN, &fimc->state) && - !list_empty(&fimc->active_buf_q) && !list_empty(&fimc->pending_buf_q)) { + vbuf = fimc_lite_pending_queue_pop(fimc); + flite_hw_set_dma_buffer(fimc, vbuf); + fimc_lite_active_queue_add(fimc, vbuf); + } + + if ((intsrc & FLITE_REG_CISTATUS_IRQ_SRC_FRMEND) && + test_bit(ST_FLITE_RUN, &fimc->state) && + !list_empty(&fimc->active_buf_q)) { vbuf = fimc_lite_active_queue_pop(fimc); ktime_get_ts(&ts); tv = &vbuf->vb.v4l2_buf.timestamp; tv->tv_sec = ts.tv_sec; tv->tv_usec = ts.tv_nsec / NSEC_PER_USEC; vbuf->vb.v4l2_buf.sequence = fimc->frame_count++; + flite_hw_mask_dma_buffer(fimc, vbuf->index); vb2_buffer_done(&vbuf->vb, VB2_BUF_STATE_DONE); - - vbuf = fimc_lite_pending_queue_pop(fimc); - flite_hw_set_output_addr(fimc, vbuf->paddr); - fimc_lite_active_queue_add(fimc, vbuf); } if (test_bit(ST_FLITE_CONFIG, &fimc->state)) @@ -307,10 +312,16 @@ done: static int start_streaming(struct vb2_queue *q, unsigned int count) { struct fimc_lite *fimc = q->drv_priv; + unsigned long flags; int ret; + spin_lock_irqsave(&fimc->slock, flags); + + fimc->buf_index = 0; fimc->frame_count = 0; + spin_unlock_irqrestore(&fimc->slock, flags); + ret = fimc_lite_hw_init(fimc, false); if (ret) { fimc_lite_reinit(fimc, false); @@ -412,10 +423,14 @@ static void buffer_queue(struct vb2_buffer *vb) spin_lock_irqsave(&fimc->slock, flags); buf->paddr = vb2_dma_contig_plane_dma_addr(vb, 0); + buf->index = fimc->buf_index++; + if (fimc->buf_index >= fimc->reqbufs_count) + fimc->buf_index = 0; + if (!test_bit(ST_FLITE_SUSPENDED, &fimc->state) && !test_bit(ST_FLITE_STREAM, &fimc->state) && list_empty(&fimc->active_buf_q)) { - flite_hw_set_output_addr(fimc, buf->paddr); + flite_hw_set_dma_buffer(fimc, buf); fimc_lite_active_queue_add(fimc, buf); } else { fimc_lite_pending_queue_add(fimc, buf); @@ -1451,8 +1466,12 @@ static int fimc_lite_probe(struct platform_device *pdev) fimc->index = of_alias_get_id(dev->of_node, "fimc-lite"); } - if (!drv_data || fimc->index < 0 || fimc->index >= FIMC_LITE_MAX_DEVS) + if (!drv_data || fimc->index >= drv_data->num_instances || + fimc->index < 0) { + dev_err(dev, "Wrong %s node alias\n", + dev->of_node->full_name); return -EINVAL; + } fimc->dd = drv_data; fimc->pdev = pdev; @@ -1609,6 +1628,19 @@ static struct flite_drvdata fimc_lite_drvdata_exynos4 = { .out_width_align = 8, .win_hor_offs_align = 2, .out_hor_offs_align = 8, + .max_dma_bufs = 1, + .num_instances = 2, +}; + +/* EXYNOS5250 */ +static struct flite_drvdata fimc_lite_drvdata_exynos5 = { + .max_width = 8192, + .max_height = 8192, + .out_width_align = 8, + .win_hor_offs_align = 2, + .out_hor_offs_align = 8, + .max_dma_bufs = 32, + .num_instances = 3, }; static const struct of_device_id flite_of_match[] = { @@ -1616,6 +1648,10 @@ static const struct of_device_id flite_of_match[] = { .compatible = "samsung,exynos4212-fimc-lite", .data = &fimc_lite_drvdata_exynos4, }, + { + .compatible = "samsung,exynos5250-fimc-lite", + .data = &fimc_lite_drvdata_exynos5, + }, { /* sentinel */ }, }; MODULE_DEVICE_TABLE(of, flite_of_match); diff --git a/drivers/media/platform/exynos4-is/fimc-lite.h b/drivers/media/platform/exynos4-is/fimc-lite.h index 4b1068425dad..c98f3da74870 100644 --- a/drivers/media/platform/exynos4-is/fimc-lite.h +++ b/drivers/media/platform/exynos4-is/fimc-lite.h @@ -27,7 +27,7 @@ #define FIMC_LITE_DRV_NAME "exynos-fimc-lite" #define FLITE_CLK_NAME "flite" -#define FIMC_LITE_MAX_DEVS 2 +#define FIMC_LITE_MAX_DEVS 3 #define FLITE_REQ_BUFS_MIN 2 /* Bit index definitions for struct fimc_lite::state */ @@ -48,12 +48,26 @@ enum { #define FLITE_SD_PAD_SOURCE_ISP 2 #define FLITE_SD_PADS_NUM 3 +/** + * struct flite_drvdata - FIMC-LITE IP variant data structure + * @max_width: maximum camera interface input width in pixels + * @max_height: maximum camera interface input height in pixels + * @out_width_align: minimum output width alignment in pixels + * @win_hor_offs_align: minimum camera interface crop window horizontal + * offset alignment in pixels + * @out_hor_offs_align: minimum output DMA compose rectangle horizontal + * offset alignment in pixels + * @max_dma_bufs: number of output DMA buffer start address registers + * @num_instances: total number of FIMC-LITE IP instances available + */ struct flite_drvdata { unsigned short max_width; unsigned short max_height; unsigned short out_width_align; unsigned short win_hor_offs_align; unsigned short out_hor_offs_align; + unsigned short max_dma_bufs; + unsigned short num_instances; }; struct fimc_lite_events { @@ -80,12 +94,14 @@ struct flite_frame { * struct flite_buffer - video buffer structure * @vb: vb2 buffer * @list: list head for the buffers queue - * @paddr: precalculated physical address + * @paddr: DMA buffer start address + * @index: DMA start address register's index */ struct flite_buffer { struct vb2_buffer vb; struct list_head list; dma_addr_t paddr; + unsigned short index; }; /** @@ -119,6 +135,7 @@ struct flite_buffer { * @pending_buf_q: pending buffers queue head * @active_buf_q: the queue head of buffers scheduled in hardware * @vb_queue: vb2 buffers queue + * @buf_index: helps to keep track of the DMA start address register index * @active_buf_count: number of video buffers scheduled in hardware * @frame_count: the captured frames counter * @reqbufs_count: the number of buffers requested with REQBUFS ioctl @@ -155,6 +172,7 @@ struct fimc_lite { struct list_head pending_buf_q; struct list_head active_buf_q; struct vb2_queue vb_queue; + unsigned short buf_index; unsigned int frame_count; unsigned int reqbufs_count; -- cgit v1.2.3 From f7354e6c230ec62d221e51aa3f970fd3d5eb2067 Mon Sep 17 00:00:00 2001 From: Sylwester Nawrocki Date: Fri, 31 May 2013 10:38:23 -0300 Subject: [media] exynos4-is: Add support for Exynos5250 MIPI-CSIS Add compatible property for the Exynos5250 and enable the frame start and frame end interrupts. These interrupts are needed for the Exynos5 FIMC-IS firmware. The driver enables those interrupt only where available, depending on the 'compatible' property. This can be optimized further, by exposing some API at the subdev driver, so the host driver can enable extra interrupts only for the image processing chains involving FIMC-IS. Signed-off-by: Shaik Ameer Basha Signed-off-by: Sylwester Nawrocki Signed-off-by: Kyungmin Park --- .../bindings/media/samsung-mipi-csis.txt | 4 +- drivers/media/platform/exynos4-is/mipi-csis.c | 67 ++++++++++++++++++---- 2 files changed, 58 insertions(+), 13 deletions(-) (limited to 'Documentation/devicetree/bindings/media') diff --git a/Documentation/devicetree/bindings/media/samsung-mipi-csis.txt b/Documentation/devicetree/bindings/media/samsung-mipi-csis.txt index 5f8e28e2484f..be45f0b1a449 100644 --- a/Documentation/devicetree/bindings/media/samsung-mipi-csis.txt +++ b/Documentation/devicetree/bindings/media/samsung-mipi-csis.txt @@ -5,8 +5,8 @@ Required properties: - compatible : "samsung,s5pv210-csis" for S5PV210 (S5PC110), "samsung,exynos4210-csis" for Exynos4210 (S5PC210), - "samsung,exynos4212-csis" for Exynos4212/Exynos4412 - SoC series; + "samsung,exynos4212-csis" for Exynos4212/Exynos4412, + "samsung,exynos5250-csis" for Exynos5250; - reg : offset and length of the register set for the device; - interrupts : should contain MIPI CSIS interrupt; the format of the interrupt specifier depends on the interrupt controller; diff --git a/drivers/media/platform/exynos4-is/mipi-csis.c b/drivers/media/platform/exynos4-is/mipi-csis.c index 254d70fe762a..0914230b42de 100644 --- a/drivers/media/platform/exynos4-is/mipi-csis.c +++ b/drivers/media/platform/exynos4-is/mipi-csis.c @@ -1,8 +1,8 @@ /* - * Samsung S5P/EXYNOS4 SoC series MIPI-CSI receiver driver + * Samsung S5P/EXYNOS SoC series MIPI-CSI receiver driver * - * Copyright (C) 2011 - 2012 Samsung Electronics Co., Ltd. - * Sylwester Nawrocki + * Copyright (C) 2011 - 2013 Samsung Electronics Co., Ltd. + * Author: Sylwester Nawrocki * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -66,11 +66,12 @@ MODULE_PARM_DESC(debug, "Debug level (0-2)"); /* Interrupt mask */ #define S5PCSIS_INTMSK 0x10 -#define S5PCSIS_INTMSK_EN_ALL 0xf000103f #define S5PCSIS_INTMSK_EVEN_BEFORE (1 << 31) #define S5PCSIS_INTMSK_EVEN_AFTER (1 << 30) #define S5PCSIS_INTMSK_ODD_BEFORE (1 << 29) #define S5PCSIS_INTMSK_ODD_AFTER (1 << 28) +#define S5PCSIS_INTMSK_FRAME_START (1 << 27) +#define S5PCSIS_INTMSK_FRAME_END (1 << 26) #define S5PCSIS_INTMSK_ERR_SOT_HS (1 << 12) #define S5PCSIS_INTMSK_ERR_LOST_FS (1 << 5) #define S5PCSIS_INTMSK_ERR_LOST_FE (1 << 4) @@ -78,6 +79,8 @@ MODULE_PARM_DESC(debug, "Debug level (0-2)"); #define S5PCSIS_INTMSK_ERR_ECC (1 << 2) #define S5PCSIS_INTMSK_ERR_CRC (1 << 1) #define S5PCSIS_INTMSK_ERR_UNKNOWN (1 << 0) +#define S5PCSIS_INTMSK_EXYNOS4_EN_ALL 0xf000103f +#define S5PCSIS_INTMSK_EXYNOS5_EN_ALL 0xfc00103f /* Interrupt source */ #define S5PCSIS_INTSRC 0x14 @@ -88,6 +91,8 @@ MODULE_PARM_DESC(debug, "Debug level (0-2)"); #define S5PCSIS_INTSRC_ODD_AFTER (1 << 28) #define S5PCSIS_INTSRC_ODD (0x3 << 28) #define S5PCSIS_INTSRC_NON_IMAGE_DATA (0xff << 28) +#define S5PCSIS_INTSRC_FRAME_START (1 << 27) +#define S5PCSIS_INTSRC_FRAME_END (1 << 26) #define S5PCSIS_INTSRC_ERR_SOT_HS (0xf << 12) #define S5PCSIS_INTSRC_ERR_LOST_FS (1 << 5) #define S5PCSIS_INTSRC_ERR_LOST_FE (1 << 4) @@ -151,6 +156,9 @@ static const struct s5pcsis_event s5pcsis_events[] = { { S5PCSIS_INTSRC_EVEN_AFTER, "Non-image data after even frame" }, { S5PCSIS_INTSRC_ODD_BEFORE, "Non-image data before odd frame" }, { S5PCSIS_INTSRC_ODD_AFTER, "Non-image data after odd frame" }, + /* Frame start/end */ + { S5PCSIS_INTSRC_FRAME_START, "Frame Start" }, + { S5PCSIS_INTSRC_FRAME_END, "Frame End" }, }; #define S5PCSIS_NUM_EVENTS ARRAY_SIZE(s5pcsis_events) @@ -159,6 +167,11 @@ struct csis_pktbuf { unsigned int len; }; +struct csis_drvdata { + /* Mask of all used interrupts in S5PCSIS_INTMSK register */ + u32 interrupt_mask; +}; + /** * struct csis_state - the driver's internal state data structure * @lock: mutex serializing the subdev and power management operations, @@ -171,6 +184,7 @@ struct csis_pktbuf { * @supplies: CSIS regulator supplies * @clock: CSIS clocks * @irq: requested s5p-mipi-csis irq number + * @interrupt_mask: interrupt mask of the all used interrupts * @flags: the state variable for power and streaming control * @clock_frequency: device bus clock frequency * @hs_settle: HS-RX settle time @@ -193,6 +207,7 @@ struct csis_state { struct regulator_bulk_data supplies[CSIS_NUM_SUPPLIES]; struct clk *clock[NUM_CSIS_CLOCKS]; int irq; + u32 interrupt_mask; u32 flags; u32 clk_frequency; @@ -274,9 +289,10 @@ static const struct csis_pix_format *find_csis_format( static void s5pcsis_enable_interrupts(struct csis_state *state, bool on) { u32 val = s5pcsis_read(state, S5PCSIS_INTMSK); - - val = on ? val | S5PCSIS_INTMSK_EN_ALL : - val & ~S5PCSIS_INTMSK_EN_ALL; + if (on) + val |= state->interrupt_mask; + else + val &= ~state->interrupt_mask; s5pcsis_write(state, S5PCSIS_INTMSK, val); } @@ -771,8 +787,12 @@ static int s5pcsis_parse_dt(struct platform_device *pdev, #define s5pcsis_parse_dt(pdev, state) (-ENOSYS) #endif +static const struct of_device_id s5pcsis_of_match[]; + static int s5pcsis_probe(struct platform_device *pdev) { + const struct of_device_id *of_id; + const struct csis_drvdata *drv_data; struct device *dev = &pdev->dev; struct resource *mem_res; struct csis_state *state; @@ -787,10 +807,19 @@ static int s5pcsis_probe(struct platform_device *pdev) spin_lock_init(&state->slock); state->pdev = pdev; - if (dev->of_node) + if (dev->of_node) { + of_id = of_match_node(s5pcsis_of_match, dev->of_node); + if (WARN_ON(of_id == NULL)) + return -EINVAL; + + drv_data = of_id->data; + state->interrupt_mask = drv_data->interrupt_mask; + ret = s5pcsis_parse_dt(pdev, state); - else + } else { ret = s5pcsis_get_platform_data(pdev, state); + } + if (ret < 0) return ret; @@ -994,9 +1023,25 @@ static const struct dev_pm_ops s5pcsis_pm_ops = { SET_SYSTEM_SLEEP_PM_OPS(s5pcsis_suspend, s5pcsis_resume) }; +static const struct csis_drvdata exynos4_csis_drvdata = { + .interrupt_mask = S5PCSIS_INTMSK_EXYNOS4_EN_ALL, +}; + +static const struct csis_drvdata exynos5_csis_drvdata = { + .interrupt_mask = S5PCSIS_INTMSK_EXYNOS5_EN_ALL, +}; + static const struct of_device_id s5pcsis_of_match[] = { - { .compatible = "samsung,s5pv210-csis" }, - { .compatible = "samsung,exynos4210-csis" }, + { + .compatible = "samsung,s5pv210-csis", + .data = &exynos4_csis_drvdata, + }, { + .compatible = "samsung,exynos4210-csis", + .data = &exynos4_csis_drvdata, + }, { + .compatible = "samsung,exynos5250-csis", + .data = &exynos5_csis_drvdata, + }, { /* sentinel */ }, }; MODULE_DEVICE_TABLE(of, s5pcsis_of_match); -- cgit v1.2.3