From 7609db4e846b26bab1c259fb025c56f4c262a21a Mon Sep 17 00:00:00 2001 From: Neil Armstrong Date: Mon, 25 Mar 2019 10:39:36 +0100 Subject: dt-bindings: phy: Add Amlogic G12A USB2 PHY Bindings Add the Amlogic G12A Family USB2 OTG PHY Bindings The PHY can work in host or peripheral modes depending on it's position. Configuration of the mode is part of the USBCTRL registers which are outside of the PHY registers. Signed-off-by: Neil Armstrong Reviewed-by: Martin Blumenstingl Reviewed-by: Rob Herring Signed-off-by: Kishon Vijay Abraham I --- .../bindings/phy/meson-g12a-usb2-phy.txt | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) create mode 100644 Documentation/devicetree/bindings/phy/meson-g12a-usb2-phy.txt (limited to 'Documentation/devicetree/bindings/phy') diff --git a/Documentation/devicetree/bindings/phy/meson-g12a-usb2-phy.txt b/Documentation/devicetree/bindings/phy/meson-g12a-usb2-phy.txt new file mode 100644 index 000000000000..a6ebc3dea159 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/meson-g12a-usb2-phy.txt @@ -0,0 +1,22 @@ +* Amlogic G12A USB2 PHY binding + +Required properties: +- compatible: Should be "amlogic,meson-g12a-usb2-phy" +- reg: The base address and length of the registers +- #phys-cells: must be 0 (see phy-bindings.txt in this directory) +- clocks: a phandle to the clock of this PHY +- clock-names: must be "xtal" +- resets: a phandle to the reset line of this PHY +- reset-names: must be "phy" +- phy-supply: see phy-bindings.txt in this directory + +Example: + usb2_phy0: phy@36000 { + compatible = "amlogic,g12a-usb2-phy"; + reg = <0x0 0x36000 0x0 0x2000>; + clocks = <&xtal>; + clock-names = "xtal"; + resets = <&reset RESET_USB_PHY21>; + reset-names = "phy"; + #phy-cells = <0>; + }; -- cgit v1.2.3