From c1c9d41319c35daa099b2e6cd1325e3ae55cfda8 Mon Sep 17 00:00:00 2001 From: Bai Ping Date: Tue, 22 Jan 2019 10:17:13 +0000 Subject: dt-bindings: imx: Add pinctrl binding doc for imx8mm Add binding doc imx8mm pinctrl driver. Signed-off-by: Bai Ping Acked-by: Aisheng Dong Signed-off-by: Linus Walleij --- .../bindings/pinctrl/fsl,imx8mm-pinctrl.txt | 36 ++++++++++++++++++++++ 1 file changed, 36 insertions(+) create mode 100644 Documentation/devicetree/bindings/pinctrl/fsl,imx8mm-pinctrl.txt (limited to 'Documentation/devicetree/bindings/pinctrl') diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx8mm-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,imx8mm-pinctrl.txt new file mode 100644 index 000000000000..524a16fca666 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx8mm-pinctrl.txt @@ -0,0 +1,36 @@ +* Freescale IMX8MM IOMUX Controller + +Please refer to fsl,imx-pinctrl.txt and pinctrl-bindings.txt in this directory +for common binding part and usage. + +Required properties: +- compatible: "fsl,imx8mm-iomuxc" +- reg: should contain the base physical address and size of the iomuxc + registers. + +Required properties in sub-nodes: +- fsl,pins: each entry consists of 6 integers and represents the mux and config + setting for one pin. The first 5 integers are specified using a PIN_FUNC_ID macro, which can be found in + . The last integer CONFIG is + the pad setting value like pull-up on this pin. Please refer to i.MX8M Mini + Reference Manual for detailed CONFIG settings. + +Examples: + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; +}; + +iomuxc: pinctrl@30330000 { + compatible = "fsl,imx8mm-iomuxc"; + reg = <0x0 0x30330000 0x0 0x10000>; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX8MM_IOMUXC_UART1_RXD_UART1_DCE_RX 0x140 + MX8MM_IOMUXC_UART1_TXD_UART1_DCE_TX 0x140 + >; + }; +}; -- cgit v1.2.3