From 9582fdcb6fcf1b596a83b161a2ea886272d2a62f Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Tue, 18 Sep 2012 16:51:19 -0600 Subject: mfd: max8907: Add power off control Add DT property "maxim,system-power-controller" to indicate whether the PMIC is in charge of controlling the system power. If this is set, the driver will provide the pm_power_off() function. Signed-off-by: Stephen Warren Signed-off-by: Samuel Ortiz --- Documentation/devicetree/bindings/regulator/max8907.txt | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'Documentation/devicetree/bindings/regulator') diff --git a/Documentation/devicetree/bindings/regulator/max8907.txt b/Documentation/devicetree/bindings/regulator/max8907.txt index 4fd847f0afc0..51e683b2bf47 100644 --- a/Documentation/devicetree/bindings/regulator/max8907.txt +++ b/Documentation/devicetree/bindings/regulator/max8907.txt @@ -16,6 +16,10 @@ Required properties: property, with valid values listed below. The content of each sub-node is defined by the standard binding for regulators; see regulator.txt. +Optional properties: +- maxim,system-power-controller: Boolean property indicating that the PMIC + controls the overall system power. + Valid regulator-compatible values are: sd1, sd2, sd3, ldo1, ldo2, ldo3, ldo4, ldo5, ldo6, ldo7, ldo8, ldo9, ldo10, @@ -29,6 +33,8 @@ Example: reg = <0x3c>; interrupts = <0 86 0x4>; + maxim,system-power-controller; + mbatt-supply = <&some_reg>; in-v1-supply = <&mbatt_reg>; ... -- cgit v1.2.3