From 9f60a65bc5e6cd882120d8477cc7bec065887e3d Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Wed, 15 Apr 2020 19:55:48 -0500 Subject: dt-bindings: Clean-up schema indentation formatting Fix various inconsistencies in schema indentation. Most of these are list indentation which should be 2 spaces more than the start of the enclosing keyword. This doesn't matter functionally, but affects running scripts which do transforms on the schema files. Signed-off-by: Rob Herring Acked-by: Maxime Ripard Acked-by: Lee Jones Acked-By: Vinod Koul Acked-by: Mark Brown Acked-by: Alexandre Belloni Signed-off-by: Rob Herring --- .../devicetree/bindings/reset/brcm,bcm7216-pcie-sata-rescal.yaml | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'Documentation/devicetree/bindings/reset') diff --git a/Documentation/devicetree/bindings/reset/brcm,bcm7216-pcie-sata-rescal.yaml b/Documentation/devicetree/bindings/reset/brcm,bcm7216-pcie-sata-rescal.yaml index 512a33bdb208..dfce6738b033 100644 --- a/Documentation/devicetree/bindings/reset/brcm,bcm7216-pcie-sata-rescal.yaml +++ b/Documentation/devicetree/bindings/reset/brcm,bcm7216-pcie-sata-rescal.yaml @@ -7,7 +7,9 @@ $schema: "http://devicetree.org/meta-schemas/core.yaml#" title: BCM7216 RESCAL reset controller -description: This document describes the BCM7216 RESCAL reset controller which is responsible for controlling the reset of the SATA and PCIe0/1 instances on BCM7216. +description: This document describes the BCM7216 RESCAL reset controller + which is responsible for controlling the reset of the SATA and PCIe0/1 + instances on BCM7216. maintainers: - Florian Fainelli -- cgit v1.2.3 From 3d21a46093352f7802b9c66c7cce35cd02a50e53 Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Wed, 15 Apr 2020 19:55:49 -0500 Subject: dt-bindings: Remove cases of 'allOf' containing a '$ref' json-schema versions draft7 and earlier have a weird behavior in that any keywords combined with a '$ref' are ignored (silently). The correct form was to put a '$ref' under an 'allOf'. This behavior is now changed in the 2019-09 json-schema spec and '$ref' can be mixed with other keywords. The json-schema library doesn't yet support this, but the tooling now does a fixup for this and either way works. This has been a constant source of review comments, so let's change this treewide so everyone copies the simpler syntax. Scripted with ruamel.yaml with some manual fixups. Some minor whitespace changes from the script. Signed-off-by: Rob Herring Acked-by: Maxime Ripard Acked-by: Lee Jones Acked-By: Vinod Koul Acked-by: Mark Brown Acked-by: Alexandre Belloni Acked-by: Wolfram Sang # for I2C Reviewed-by: Linus Walleij Acked-by: Jonathan Cameron #for-iio Reviewed-by: Stephen Boyd # clock Signed-off-by: Rob Herring --- .../devicetree/bindings/arm/arm,vexpress-juno.yaml | 34 ++- .../devicetree/bindings/arm/coresight-cti.yaml | 18 +- Documentation/devicetree/bindings/arm/cpus.yaml | 85 ++++--- Documentation/devicetree/bindings/arm/l2c2x0.yaml | 87 +++---- Documentation/devicetree/bindings/arm/psci.yaml | 16 +- .../bindings/arm/samsung/exynos-chipid.yaml | 5 +- .../bindings/bus/allwinner,sun50i-a64-de2.yaml | 5 +- .../bindings/clock/fixed-factor-clock.yaml | 5 +- .../bindings/connector/usb-connector.yaml | 28 +-- .../devicetree/bindings/crypto/st,stm32-hash.yaml | 9 +- .../allwinner,sun4i-a10-display-engine.yaml | 7 +- .../bindings/display/allwinner,sun4i-a10-tcon.yaml | 5 +- .../bindings/display/panel/panel-common.yaml | 11 +- .../bindings/display/panel/panel-timing.yaml | 120 +++++----- .../bindings/display/ti/ti,am65x-dss.yaml | 5 +- .../devicetree/bindings/dma/dma-common.yaml | 3 +- .../devicetree/bindings/dma/ti/k3-udma.yaml | 21 +- Documentation/devicetree/bindings/eeprom/at24.yaml | 11 +- .../devicetree/bindings/example-schema.yaml | 17 +- .../bindings/extcon/extcon-usbc-cros-ec.yaml | 3 +- .../bindings/hwmon/adi,axi-fan-control.yaml | 3 +- .../devicetree/bindings/hwmon/adi,ltc2947.yaml | 32 ++- .../devicetree/bindings/hwmon/adt7475.yaml | 18 +- .../devicetree/bindings/hwmon/ti,tmp513.yaml | 21 +- .../devicetree/bindings/i2c/st,stm32-i2c.yaml | 9 +- .../devicetree/bindings/iio/adc/adi,ad7124.yaml | 5 +- .../devicetree/bindings/iio/adc/lltc,ltc2496.yaml | 3 +- .../bindings/iio/adc/microchip,mcp3911.yaml | 7 +- .../devicetree/bindings/iio/adc/st,stm32-adc.yaml | 35 ++- .../bindings/iio/adc/st,stm32-dfsdm-adc.yaml | 27 +-- .../devicetree/bindings/iio/light/tsl2772.yaml | 13 +- .../bindings/iio/temperature/adi,ltc2983.yaml | 56 ++--- .../input/allwinner,sun4i-a10-lradc-keys.yaml | 5 +- .../devicetree/bindings/input/gpio-keys.yaml | 19 +- Documentation/devicetree/bindings/input/input.yaml | 9 +- .../devicetree/bindings/input/iqs62x-keys.yaml | 7 +- .../bindings/input/touchscreen/edt-ft5x06.yaml | 28 +-- .../bindings/interrupt-controller/arm,gic-v3.yaml | 39 ++- .../interrupt-controller/loongson,liointc.yaml | 8 +- .../devicetree/bindings/iommu/arm,smmu.yaml | 3 +- Documentation/devicetree/bindings/leds/common.yaml | 13 +- .../devicetree/bindings/leds/leds-gpio.yaml | 3 +- .../bindings/leds/rohm,bd71828-leds.yaml | 9 +- .../devicetree/bindings/mailbox/st,stm32-ipcc.yaml | 5 +- .../devicetree/bindings/media/amlogic,gx-vdec.yaml | 6 +- .../bindings/media/amlogic,meson-gx-ao-cec.yaml | 3 +- .../devicetree/bindings/media/i2c/imx219.yaml | 3 +- Documentation/devicetree/bindings/media/rc.yaml | 265 ++++++++++----------- .../devicetree/bindings/media/renesas,vin.yaml | 7 +- .../bindings/memory-controllers/exynos-srom.yaml | 9 +- .../memory-controllers/nvidia,tegra124-emc.yaml | 9 +- .../memory-controllers/nvidia,tegra124-mc.yaml | 3 +- .../memory-controllers/nvidia,tegra30-emc.yaml | 9 +- .../memory-controllers/nvidia,tegra30-mc.yaml | 3 +- .../bindings/mfd/allwinner,sun4i-a10-ts.yaml | 20 +- .../devicetree/bindings/mfd/st,stm32-timers.yaml | 33 ++- .../devicetree/bindings/mfd/st,stpmic1.yaml | 9 +- Documentation/devicetree/bindings/mfd/syscon.yaml | 5 +- .../devicetree/bindings/mmc/aspeed,sdhci.yaml | 4 +- .../devicetree/bindings/mmc/cdns,sdhci.yaml | 77 +++--- .../devicetree/bindings/mmc/mmc-controller.yaml | 37 ++- .../devicetree/bindings/mmc/rockchip-dw-mshc.yaml | 6 +- .../bindings/mmc/synopsys-dw-mshc-common.yaml | 14 +- .../bindings/mtd/allwinner,sun4i-a10-nand.yaml | 13 +- .../devicetree/bindings/mtd/nand-controller.yaml | 27 +-- .../devicetree/bindings/net/can/bosch,m_can.yaml | 59 +++-- .../bindings/net/ethernet-controller.yaml | 34 ++- .../devicetree/bindings/net/qca,ar803x.yaml | 17 +- .../devicetree/bindings/net/qcom,ipa.yaml | 6 +- .../devicetree/bindings/net/snps,dwmac.yaml | 22 +- .../devicetree/bindings/net/stm32-dwmac.yaml | 3 +- .../devicetree/bindings/net/ti,cpsw-switch.yaml | 6 +- .../devicetree/bindings/net/ti,davinci-mdio.yaml | 7 +- .../bindings/net/ti,k3-am654-cpsw-nuss.yaml | 7 +- .../devicetree/bindings/pci/cdns-pcie-host.yaml | 3 +- .../devicetree/bindings/pci/cdns-pcie.yaml | 3 +- .../devicetree/bindings/pci/intel-gw-pcie.yaml | 7 +- Documentation/devicetree/bindings/pci/pci-ep.yaml | 9 +- .../bindings/phy/phy-cadence-torrent.yaml | 15 +- .../devicetree/bindings/phy/qcom,qusb2-phy.yaml | 65 +++-- .../pinctrl/allwinner,sun4i-a10-pinctrl.yaml | 12 +- .../bindings/pinctrl/aspeed,ast2400-pinctrl.yaml | 37 ++- .../bindings/pinctrl/aspeed,ast2500-pinctrl.yaml | 44 ++-- .../bindings/pinctrl/aspeed,ast2600-pinctrl.yaml | 108 ++++----- .../bindings/pinctrl/fsl,imx8mm-pinctrl.yaml | 31 ++- .../bindings/pinctrl/fsl,imx8mn-pinctrl.yaml | 31 ++- .../bindings/pinctrl/fsl,imx8mp-pinctrl.yaml | 31 ++- .../bindings/pinctrl/fsl,imx8mq-pinctrl.yaml | 31 ++- .../devicetree/bindings/pinctrl/intel,lgm-io.yaml | 4 +- .../devicetree/bindings/pinctrl/pinmux-node.yaml | 3 +- .../bindings/pinctrl/qcom,ipq6018-pinctrl.yaml | 3 +- .../bindings/pinctrl/st,stm32-pinctrl.yaml | 54 ++--- .../bindings/power/amlogic,meson-ee-pwrc.yaml | 3 +- .../devicetree/bindings/pwm/pwm-samsung.yaml | 11 +- .../bindings/regulator/gpio-regulator.yaml | 35 ++- .../devicetree/bindings/regulator/mps,mp5416.yaml | 6 +- .../devicetree/bindings/regulator/mps,mpq7920.yaml | 28 +-- .../devicetree/bindings/regulator/regulator.yaml | 5 +- .../bindings/regulator/rohm,bd71828-regulator.yaml | 34 ++- .../bindings/regulator/rohm,bd71837-regulator.yaml | 27 +-- .../bindings/regulator/st,stm32-booster.yaml | 3 +- .../bindings/regulator/st,stm32mp1-pwr-reg.yaml | 3 +- .../bindings/remoteproc/st,stm32-rproc.yaml | 9 +- .../devicetree/bindings/reset/intel,rcu-gw.yaml | 3 +- Documentation/devicetree/bindings/riscv/cpus.yaml | 20 +- .../devicetree/bindings/rtc/st,stm32-rtc.yaml | 9 +- .../devicetree/bindings/serial/pl011.yaml | 10 +- .../devicetree/bindings/serial/rs485.yaml | 26 +- .../devicetree/bindings/serial/samsung_uart.yaml | 5 +- .../devicetree/bindings/sound/adi,adau7118.yaml | 20 +- .../bindings/sound/allwinner,sun4i-a10-codec.yaml | 51 ++-- .../devicetree/bindings/sound/qcom,wcd934x.yaml | 3 +- .../devicetree/bindings/sound/rockchip-i2s.yaml | 6 +- .../devicetree/bindings/sound/tlv320adcx140.yaml | 10 +- .../devicetree/bindings/spi/renesas,sh-msiof.yaml | 42 ++-- .../devicetree/bindings/spi/spi-controller.yaml | 14 +- .../devicetree/bindings/spi/spi-pl022.yaml | 55 ++--- .../devicetree/bindings/spi/spi-sifive.yaml | 14 +- .../devicetree/bindings/thermal/qcom-tsens.yaml | 7 +- .../bindings/timer/arm,arch_timer_mmio.yaml | 7 +- .../devicetree/bindings/timer/ingenic,tcu.yaml | 13 +- .../devicetree/bindings/usb/aspeed,usb-vhub.yaml | 18 +- 122 files changed, 1135 insertions(+), 1448 deletions(-) (limited to 'Documentation/devicetree/bindings/reset') diff --git a/Documentation/devicetree/bindings/arm/arm,vexpress-juno.yaml b/Documentation/devicetree/bindings/arm/arm,vexpress-juno.yaml index 8c06a73f716c..a3420c81cf35 100644 --- a/Documentation/devicetree/bindings/arm/arm,vexpress-juno.yaml +++ b/Documentation/devicetree/bindings/arm/arm,vexpress-juno.yaml @@ -131,26 +131,23 @@ properties: property, describing the physical location of the children nodes. 0 means motherboard site, while 1 and 2 are daughterboard sites, and 0xf means "sisterboard" which is the site containing the main CPU tile. - allOf: - - $ref: '/schemas/types.yaml#/definitions/uint32' - - minimum: 0 - maximum: 15 + $ref: '/schemas/types.yaml#/definitions/uint32' + minimum: 0 + maximum: 15 arm,vexpress,position: description: When daughterboards are stacked on one site, their position in the stack be be described this attribute. - allOf: - - $ref: '/schemas/types.yaml#/definitions/uint32' - - minimum: 0 - maximum: 3 + $ref: '/schemas/types.yaml#/definitions/uint32' + minimum: 0 + maximum: 3 arm,vexpress,dcc: description: When describing tiles consisting of more than one DCC, its number can be specified with this attribute. - allOf: - - $ref: '/schemas/types.yaml#/definitions/uint32' - - minimum: 0 - maximum: 3 + $ref: '/schemas/types.yaml#/definitions/uint32' + minimum: 0 + maximum: 3 patternProperties: "^bus@[0-9a-f]+$": @@ -162,8 +159,7 @@ patternProperties: "simple-bus". If the compatible is placed in the "motherboard" node, it is stricter and always has two compatibles. type: object - allOf: - - $ref: '/schemas/simple-bus.yaml' + $ref: '/schemas/simple-bus.yaml' properties: compatible: @@ -195,11 +191,11 @@ patternProperties: - const: simple-bus arm,v2m-memory-map: description: This describes the memory map type. - allOf: - - $ref: '/schemas/types.yaml#/definitions/string' - - enum: - - rs1 - - rs2 + $ref: '/schemas/types.yaml#/definitions/string' + enum: + - rs1 + - rs2 + required: - compatible required: diff --git a/Documentation/devicetree/bindings/arm/coresight-cti.yaml b/Documentation/devicetree/bindings/arm/coresight-cti.yaml index 3db3642bd532..6b31008d67b5 100644 --- a/Documentation/devicetree/bindings/arm/coresight-cti.yaml +++ b/Documentation/devicetree/bindings/arm/coresight-cti.yaml @@ -140,16 +140,14 @@ patternProperties: maxItems: 1 arm,trig-in-sigs: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array + $ref: /schemas/types.yaml#/definitions/uint32-array minItems: 1 maxItems: 32 description: List of CTI trigger in signal numbers in use by a trig-conns node. arm,trig-in-types: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array + $ref: /schemas/types.yaml#/definitions/uint32-array minItems: 1 maxItems: 32 description: @@ -159,16 +157,14 @@ patternProperties: completely, then the types will default to GEN_IO. arm,trig-out-sigs: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array + $ref: /schemas/types.yaml#/definitions/uint32-array minItems: 1 maxItems: 32 description: List of CTI trigger out signal numbers in use by a trig-conns node. arm,trig-out-types: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array + $ref: /schemas/types.yaml#/definitions/uint32-array minItems: 1 maxItems: 32 description: @@ -178,8 +174,7 @@ patternProperties: or omitted completely, then the types will default to GEN_IO. arm,trig-filters: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array + $ref: /schemas/types.yaml#/definitions/uint32-array minItems: 1 maxItems: 32 description: @@ -187,8 +182,7 @@ patternProperties: active, unless filtering is disabled on the driver. arm,trig-conn-name: - allOf: - - $ref: /schemas/types.yaml#/definitions/string + $ref: /schemas/types.yaml#/definitions/string description: Defines a connection name that will be displayed, if the cpu or arm,cs-dev-assoc properties are not being used in this connection. diff --git a/Documentation/devicetree/bindings/arm/cpus.yaml b/Documentation/devicetree/bindings/arm/cpus.yaml index a01814765ddb..6f77d19baacb 100644 --- a/Documentation/devicetree/bindings/arm/cpus.yaml +++ b/Documentation/devicetree/bindings/arm/cpus.yaml @@ -171,49 +171,48 @@ properties: - qcom,scorpion enable-method: - allOf: - - $ref: '/schemas/types.yaml#/definitions/string' - - oneOf: - # On ARM v8 64-bit this property is required - - enum: - - psci - - spin-table - # On ARM 32-bit systems this property is optional - - enum: - - actions,s500-smp - - allwinner,sun6i-a31 - - allwinner,sun8i-a23 - - allwinner,sun9i-a80-smp - - allwinner,sun8i-a83t-smp - - amlogic,meson8-smp - - amlogic,meson8b-smp - - arm,realview-smp - - aspeed,ast2600-smp - - brcm,bcm11351-cpu-method - - brcm,bcm23550 - - brcm,bcm2836-smp - - brcm,bcm63138 - - brcm,bcm-nsp-smp - - brcm,brahma-b15 - - marvell,armada-375-smp - - marvell,armada-380-smp - - marvell,armada-390-smp - - marvell,armada-xp-smp - - marvell,98dx3236-smp - - marvell,mmp3-smp - - mediatek,mt6589-smp - - mediatek,mt81xx-tz-smp - - qcom,gcc-msm8660 - - qcom,kpss-acc-v1 - - qcom,kpss-acc-v2 - - renesas,apmu - - renesas,r9a06g032-smp - - rockchip,rk3036-smp - - rockchip,rk3066-smp - - socionext,milbeaut-m10v-smp - - ste,dbx500-smp - - ti,am3352 - - ti,am4372 + $ref: '/schemas/types.yaml#/definitions/string' + oneOf: + # On ARM v8 64-bit this property is required + - enum: + - psci + - spin-table + # On ARM 32-bit systems this property is optional + - enum: + - actions,s500-smp + - allwinner,sun6i-a31 + - allwinner,sun8i-a23 + - allwinner,sun9i-a80-smp + - allwinner,sun8i-a83t-smp + - amlogic,meson8-smp + - amlogic,meson8b-smp + - arm,realview-smp + - aspeed,ast2600-smp + - brcm,bcm11351-cpu-method + - brcm,bcm23550 + - brcm,bcm2836-smp + - brcm,bcm63138 + - brcm,bcm-nsp-smp + - brcm,brahma-b15 + - marvell,armada-375-smp + - marvell,armada-380-smp + - marvell,armada-390-smp + - marvell,armada-xp-smp + - marvell,98dx3236-smp + - marvell,mmp3-smp + - mediatek,mt6589-smp + - mediatek,mt81xx-tz-smp + - qcom,gcc-msm8660 + - qcom,kpss-acc-v1 + - qcom,kpss-acc-v2 + - renesas,apmu + - renesas,r9a06g032-smp + - rockchip,rk3036-smp + - rockchip,rk3066-smp + - socionext,milbeaut-m10v-smp + - ste,dbx500-smp + - ti,am3352 + - ti,am4372 cpu-release-addr: $ref: '/schemas/types.yaml#/definitions/uint64' diff --git a/Documentation/devicetree/bindings/arm/l2c2x0.yaml b/Documentation/devicetree/bindings/arm/l2c2x0.yaml index 5d1d50eea26e..6b8f4d4fa580 100644 --- a/Documentation/devicetree/bindings/arm/l2c2x0.yaml +++ b/Documentation/devicetree/bindings/arm/l2c2x0.yaml @@ -70,43 +70,39 @@ properties: description: Cycles of latency for Data RAM accesses. Specifies 3 cells of read, write and setup latencies. Minimum valid values are 1. Controllers without setup latency control should use a value of 0. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array - - minItems: 2 - maxItems: 3 - items: - minimum: 0 - maximum: 8 + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 2 + maxItems: 3 + items: + minimum: 0 + maximum: 8 arm,tag-latency: description: Cycles of latency for Tag RAM accesses. Specifies 3 cells of read, write and setup latencies. Controllers without setup latency control should use 0. Controllers without separate read and write Tag RAM latency values should only use the first cell. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array - - minItems: 1 - maxItems: 3 - items: - minimum: 0 - maximum: 8 + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 3 + items: + minimum: 0 + maximum: 8 arm,dirty-latency: description: Cycles of latency for Dirty RAMs. This is a single cell. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - minimum: 1 - maximum: 8 + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 + maximum: 8 arm,filter-ranges: description: Starting address and length of window to filter. Addresses in the filter window are directed to the M1 port. Other addresses will go to the M0 port. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array - - items: - minItems: 2 - maxItems: 2 + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + minItems: 2 + maxItems: 2 arm,io-coherent: description: indicates that the system is operating in an hardware @@ -131,36 +127,31 @@ properties: arm,double-linefill: description: Override double linefill enable setting. Enable if non-zero, disable if zero. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [ 0, 1 ] + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1] arm,double-linefill-incr: description: Override double linefill on INCR read. Enable if non-zero, disable if zero. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [ 0, 1 ] + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1] arm,double-linefill-wrap: description: Override double linefill on WRAP read. Enable if non-zero, disable if zero. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [ 0, 1 ] + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1] arm,prefetch-drop: description: Override prefetch drop enable setting. Enable if non-zero, disable if zero. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [ 0, 1 ] + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1] arm,prefetch-offset: description: Override prefetch offset value. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [ 0, 1, 2, 3, 4, 5, 6, 7, 15, 23, 31 ] + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3, 4, 5, 6, 7, 15, 23, 31] arm,shared-override: description: The default behavior of the L220 or PL310 cache @@ -193,35 +184,31 @@ properties: description: | Data prefetch. Value: <0> (forcibly disable), <1> (forcibly enable), property absent (retain settings set by firmware) - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [ 0, 1 ] + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1] prefetch-instr: description: | Instruction prefetch. Value: <0> (forcibly disable), <1> (forcibly enable), property absent (retain settings set by firmware) - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [ 0, 1 ] + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1] arm,dynamic-clock-gating: description: | L2 dynamic clock gating. Value: <0> (forcibly disable), <1> (forcibly enable), property absent (OS specific behavior, preferably retain firmware settings) - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [ 0, 1 ] + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1] arm,standby-mode: description: L2 standby mode enable. Value <0> (forcibly disable), <1> (forcibly enable), property absent (OS specific behavior, preferably retain firmware settings) - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [ 0, 1 ] + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1] arm,early-bresp-disable: description: Disable the CA9 optimization Early BRESP (PL310) diff --git a/Documentation/devicetree/bindings/arm/psci.yaml b/Documentation/devicetree/bindings/arm/psci.yaml index 9247b58c26fc..8b77cf83a095 100644 --- a/Documentation/devicetree/bindings/arm/psci.yaml +++ b/Documentation/devicetree/bindings/arm/psci.yaml @@ -69,13 +69,11 @@ properties: method: description: The method of calling the PSCI firmware. - allOf: - - $ref: /schemas/types.yaml#/definitions/string-array - - enum: - # SMC #0, with the register assignments specified in this binding. - - smc - # HVC #0, with the register assignments specified in this binding. - - hvc + $ref: /schemas/types.yaml#/definitions/string-array + enum: + - smc + # HVC #0, with the register assignments specified in this binding. + - hvc cpu_suspend: $ref: /schemas/types.yaml#/definitions/uint32 @@ -107,8 +105,8 @@ properties: patternProperties: "^power-domain-": - allOf: - - $ref: "../power/power-domain.yaml#" + $ref: "../power/power-domain.yaml#" + type: object description: | ARM systems can have multiple cores, sometimes in an hierarchical diff --git a/Documentation/devicetree/bindings/arm/samsung/exynos-chipid.yaml b/Documentation/devicetree/bindings/arm/samsung/exynos-chipid.yaml index 0425d333b50d..f99c0c6df21b 100644 --- a/Documentation/devicetree/bindings/arm/samsung/exynos-chipid.yaml +++ b/Documentation/devicetree/bindings/arm/samsung/exynos-chipid.yaml @@ -22,9 +22,8 @@ properties: Adaptive Supply Voltage bin selection. This can be used to determine the ASV bin of an SoC if respective information is missing in the CHIPID registers or in the OTP memory. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [ 0, 1, 2, 3 ] + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] required: - compatible diff --git a/Documentation/devicetree/bindings/bus/allwinner,sun50i-a64-de2.yaml b/Documentation/devicetree/bindings/bus/allwinner,sun50i-a64-de2.yaml index f0b3d30fbb76..0503651cd214 100644 --- a/Documentation/devicetree/bindings/bus/allwinner,sun50i-a64-de2.yaml +++ b/Documentation/devicetree/bindings/bus/allwinner,sun50i-a64-de2.yaml @@ -31,12 +31,11 @@ properties: maxItems: 1 allwinner,sram: - allOf: - - $ref: /schemas/types.yaml#definitions/phandle-array - - maxItems: 1 description: The SRAM that needs to be claimed to access the display engine bus. + $ref: /schemas/types.yaml#definitions/phandle-array + maxItems: 1 ranges: true diff --git a/Documentation/devicetree/bindings/clock/fixed-factor-clock.yaml b/Documentation/devicetree/bindings/clock/fixed-factor-clock.yaml index b567f8092f8c..f415845b38dd 100644 --- a/Documentation/devicetree/bindings/clock/fixed-factor-clock.yaml +++ b/Documentation/devicetree/bindings/clock/fixed-factor-clock.yaml @@ -24,9 +24,8 @@ properties: clock-div: description: Fixed divider - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - minimum: 1 + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 clock-mult: description: Fixed multiplier diff --git a/Documentation/devicetree/bindings/connector/usb-connector.yaml b/Documentation/devicetree/bindings/connector/usb-connector.yaml index 369c58e22a06..03b92b6f35fa 100644 --- a/Documentation/devicetree/bindings/connector/usb-connector.yaml +++ b/Documentation/devicetree/bindings/connector/usb-connector.yaml @@ -27,8 +27,8 @@ properties: description: Size of the connector, should be specified in case of non-fullsize 'usb-a-connector' or 'usb-b-connector' compatible connectors. - allOf: - - $ref: /schemas/types.yaml#definitions/string + $ref: /schemas/types.yaml#definitions/string + enum: - mini - micro @@ -57,8 +57,8 @@ properties: power-role: description: Determines the power role that the Type C connector will support. "dual" refers to Dual Role Port (DRP). - allOf: - - $ref: /schemas/types.yaml#definitions/string + $ref: /schemas/types.yaml#definitions/string + enum: - source - sink @@ -66,18 +66,18 @@ properties: try-power-role: description: Preferred power role. - allOf: - - $ref: /schemas/types.yaml#definitions/string + $ref: /schemas/types.yaml#definitions/string + enum: - - source - - sink - - dual + - source + - sink + - dual data-role: description: Data role if Type C connector supports USB data. "dual" refers Dual Role Device (DRD). - allOf: - - $ref: /schemas/types.yaml#definitions/string + $ref: /schemas/types.yaml#definitions/string + enum: - host - device @@ -95,8 +95,7 @@ properties: defined in dt-bindings/usb/pd.h. minItems: 1 maxItems: 7 - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array + $ref: /schemas/types.yaml#/definitions/uint32-array sink-pdos: description: An array of u32 with each entry providing supported power sink @@ -108,8 +107,7 @@ properties: in dt-bindings/usb/pd.h. minItems: 1 maxItems: 7 - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array + $ref: /schemas/types.yaml#/definitions/uint32-array op-sink-microwatt: description: Sink required operating power in microwatt, if source can't diff --git a/Documentation/devicetree/bindings/crypto/st,stm32-hash.yaml b/Documentation/devicetree/bindings/crypto/st,stm32-hash.yaml index 57ae1c0b6d18..6dd658f0912c 100644 --- a/Documentation/devicetree/bindings/crypto/st,stm32-hash.yaml +++ b/Documentation/devicetree/bindings/crypto/st,stm32-hash.yaml @@ -36,11 +36,10 @@ properties: dma-maxburst: description: Set number of maximum dma burst supported - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - minimum: 0 - - maximum: 2 - - default: 0 + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 2 + default: 0 required: - compatible diff --git a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-engine.yaml b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-engine.yaml index 944ff2f1cf93..e77523b02fad 100644 --- a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-engine.yaml +++ b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-engine.yaml @@ -66,10 +66,9 @@ properties: - allwinner,sun50i-h6-display-engine allwinner,pipelines: - allOf: - - $ref: /schemas/types.yaml#/definitions/phandle-array - - minItems: 1 - maxItems: 2 + $ref: /schemas/types.yaml#/definitions/phandle-array + minItems: 1 + maxItems: 2 description: | Available display engine frontends (DE 1.0) or mixers (DE 2.0/3.0) available. diff --git a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tcon.yaml b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tcon.yaml index 87cb77b32ee3..4c15a2644a7c 100644 --- a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tcon.yaml +++ b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tcon.yaml @@ -71,11 +71,10 @@ properties: maxItems: 4 clock-output-names: - allOf: - - $ref: /schemas/types.yaml#/definitions/string-array - - maxItems: 1 description: Name of the LCD pixel clock created. + $ref: /schemas/types.yaml#/definitions/string-array + maxItems: 1 dmas: maxItems: 1 diff --git a/Documentation/devicetree/bindings/display/panel/panel-common.yaml b/Documentation/devicetree/bindings/display/panel/panel-common.yaml index ed051ba12084..db3d270a33c6 100644 --- a/Documentation/devicetree/bindings/display/panel/panel-common.yaml +++ b/Documentation/devicetree/bindings/display/panel/panel-common.yaml @@ -48,9 +48,8 @@ properties: rotation: description: Display rotation in degrees counter clockwise (0,90,180,270) - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [ 0, 90, 180, 270 ] + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 90, 180, 270] # Display Timings panel-timing: @@ -58,16 +57,14 @@ properties: Most display panels are restricted to a single resolution and require specific display timings. The panel-timing subnode expresses those timings. - allOf: - - $ref: panel-timing.yaml# + $ref: panel-timing.yaml# display-timings: description: Some display panels supports several resolutions with different timing. The display-timings bindings supports specifying several timings and optional specify which is the native mode. - allOf: - - $ref: display-timings.yaml# + $ref: display-timings.yaml# # Connectivity port: diff --git a/Documentation/devicetree/bindings/display/panel/panel-timing.yaml b/Documentation/devicetree/bindings/display/panel/panel-timing.yaml index bd558ad7891f..182c19cb7fdd 100644 --- a/Documentation/devicetree/bindings/display/panel/panel-timing.yaml +++ b/Documentation/devicetree/bindings/display/panel/panel-timing.yaml @@ -72,92 +72,80 @@ properties: hfront-porch: description: Horizontal front porch panel timing oneOf: - - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - maxItems: 1 - items: - description: typical number of pixels - - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array - - minItems: 3 - maxItems: 3 - items: - description: min, typ, max number of pixels + - $ref: /schemas/types.yaml#/definitions/uint32 + maxItems: 1 + items: + description: typical number of pixels + - $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 3 + maxItems: 3 + items: + description: min, typ, max number of pixels hback-porch: description: Horizontal back porch timing oneOf: - - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - maxItems: 1 - items: - description: typical number of pixels - - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array - - minItems: 3 - maxItems: 3 - items: - description: min, typ, max number of pixels + - $ref: /schemas/types.yaml#/definitions/uint32 + maxItems: 1 + items: + description: typical number of pixels + - $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 3 + maxItems: 3 + items: + description: min, typ, max number of pixels hsync-len: description: Horizontal sync length panel timing oneOf: - - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - maxItems: 1 - items: - description: typical number of pixels - - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array - - minItems: 3 - maxItems: 3 - items: - description: min, typ, max number of pixels + - $ref: /schemas/types.yaml#/definitions/uint32 + maxItems: 1 + items: + description: typical number of pixels + - $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 3 + maxItems: 3 + items: + description: min, typ, max number of pixels vfront-porch: description: Vertical front porch panel timing oneOf: - - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - maxItems: 1 - items: - description: typical number of lines - - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array - - minItems: 3 - maxItems: 3 - items: - description: min, typ, max number of lines + - $ref: /schemas/types.yaml#/definitions/uint32 + maxItems: 1 + items: + description: typical number of lines + - $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 3 + maxItems: 3 + items: + description: min, typ, max number of lines vback-porch: description: Vertical back porch panel timing oneOf: - - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - maxItems: 1 - items: - description: typical number of lines - - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array - - minItems: 3 - maxItems: 3 - items: - description: min, typ, max number of lines + - $ref: /schemas/types.yaml#/definitions/uint32 + maxItems: 1 + items: + description: typical number of lines + - $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 3 + maxItems: 3 + items: + description: min, typ, max number of lines vsync-len: description: Vertical sync length panel timing oneOf: - - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - maxItems: 1 - items: - description: typical number of lines - - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array - - minItems: 3 - maxItems: 3 - items: - description: min, typ, max number of lines + - $ref: /schemas/types.yaml#/definitions/uint32 + maxItems: 1 + items: + description: typical number of lines + - $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 3 + maxItems: 3 + items: + description: min, typ, max number of lines hsync-active: description: | diff --git a/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml b/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml index eb04c2330698..7af21bde32e4 100644 --- a/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml +++ b/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml @@ -88,9 +88,8 @@ properties: - "#size-cells" ti,am65x-oldi-io-ctrl: - allOf: - - $ref: "/schemas/types.yaml#/definitions/phandle-array" - - maxItems: 1 + $ref: "/schemas/types.yaml#/definitions/phandle-array" + maxItems: 1 description: phandle to syscon device node mapping OLDI IO_CTRL registers. The mapped range should point to OLDI_DAT0_IO_CTRL, map it and diff --git a/Documentation/devicetree/bindings/dma/dma-common.yaml b/Documentation/devicetree/bindings/dma/dma-common.yaml index 02a34ba2b49b..c36592683340 100644 --- a/Documentation/devicetree/bindings/dma/dma-common.yaml +++ b/Documentation/devicetree/bindings/dma/dma-common.yaml @@ -31,8 +31,7 @@ properties: kernel. i.e. first channel corresponds to LSB. The first item in the array is for channels 0-31, the second is for channels 32-63, etc. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array + $ref: /schemas/types.yaml#/definitions/uint32-array items: minItems: 1 # Should be enough diff --git a/Documentation/devicetree/bindings/dma/ti/k3-udma.yaml b/Documentation/devicetree/bindings/dma/ti/k3-udma.yaml index 85056982a242..dd70ddab4fd1 100644 --- a/Documentation/devicetree/bindings/dma/ti/k3-udma.yaml +++ b/Documentation/devicetree/bindings/dma/ti/k3-udma.yaml @@ -78,25 +78,21 @@ properties: ti,sci: description: phandle to TI-SCI compatible System controller node - allOf: - - $ref: /schemas/types.yaml#/definitions/phandle + $ref: /schemas/types.yaml#/definitions/phandle ti,sci-dev-id: description: TI-SCI device id of UDMAP - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 ti,ringacc: description: phandle to the ring accelerator node - allOf: - - $ref: /schemas/types.yaml#/definitions/phandle + $ref: /schemas/types.yaml#/definitions/phandle ti,sci-rm-range-tchan: description: | Array of UDMA tchan resource subtypes for resource allocation for this host - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array + $ref: /schemas/types.yaml#/definitions/uint32-array minItems: 1 # Should be enough maxItems: 255 @@ -105,8 +101,7 @@ properties: description: | Array of UDMA rchan resource subtypes for resource allocation for this host - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array + $ref: /schemas/types.yaml#/definitions/uint32-array minItems: 1 # Should be enough maxItems: 255 @@ -115,8 +110,7 @@ properties: description: | Array of UDMA rflow resource subtypes for resource allocation for this host - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array + $ref: /schemas/types.yaml#/definitions/uint32-array minItems: 1 # Should be enough maxItems: 255 @@ -142,8 +136,7 @@ then: properties: ti,udma-atype: description: ATYPE value which should be used by non slave channels - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 required: - ti,udma-atype diff --git a/Documentation/devicetree/bindings/eeprom/at24.yaml b/Documentation/devicetree/bindings/eeprom/at24.yaml index a15787e504f0..de513fe333a7 100644 --- a/Documentation/devicetree/bindings/eeprom/at24.yaml +++ b/Documentation/devicetree/bindings/eeprom/at24.yaml @@ -118,14 +118,13 @@ properties: maxItems: 1 pagesize: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 description: The length of the pagesize for writing. Please consult the manual of your device, that value varies a lot. A wrong value may result in data loss! If not specified, a safety value of '1' is used which will be very slow. - enum: [ 1, 8, 16, 32, 64, 128, 258 ] + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [1, 8, 16, 32, 64, 128, 258] default: 1 read-only: @@ -148,18 +147,16 @@ properties: wp-gpios: true address-width: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 description: Number of address bits. + $ref: /schemas/types.yaml#/definitions/uint32 default: 8 enum: [ 8, 16 ] num-addresses: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 description: Total number of i2c slave addresses this device takes. + $ref: /schemas/types.yaml#/definitions/uint32 default: 1 minimum: 1 maximum: 8 diff --git a/Documentation/devicetree/bindings/example-schema.yaml b/Documentation/devicetree/bindings/example-schema.yaml index 62811a1b5058..c9534d2164a2 100644 --- a/Documentation/devicetree/bindings/example-schema.yaml +++ b/Documentation/devicetree/bindings/example-schema.yaml @@ -138,12 +138,8 @@ properties: # 'description'. vendor,int-property: description: Vendor specific properties must have a description - # 'allOf' is the json-schema way of subclassing a schema. Here the base - # type schema is referenced and then additional constraints on the values - # are added. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [2, 4, 6, 8, 10] + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [2, 4, 6, 8, 10] vendor,bool-property: description: Vendor specific properties must have a description. Boolean @@ -154,11 +150,10 @@ properties: vendor,string-array-property: description: Vendor specific properties should reference a type in the core schema. - allOf: - - $ref: /schemas/types.yaml#/definitions/string-array - - items: - - enum: [ foo, bar ] - - enum: [ baz, boo ] + $ref: /schemas/types.yaml#/definitions/string-array + items: + - enum: [foo, bar] + - enum: [baz, boo] vendor,property-in-standard-units-microvolt: description: Vendor specific properties having a standard unit suffix diff --git a/Documentation/devicetree/bindings/extcon/extcon-usbc-cros-ec.yaml b/Documentation/devicetree/bindings/extcon/extcon-usbc-cros-ec.yaml index 9c5849b341ea..20e1ccfc8630 100644 --- a/Documentation/devicetree/bindings/extcon/extcon-usbc-cros-ec.yaml +++ b/Documentation/devicetree/bindings/extcon/extcon-usbc-cros-ec.yaml @@ -22,8 +22,7 @@ properties: const: google,extcon-usbc-cros-ec google,usb-port-id: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 description: the port id minimum: 0 maximum: 255 diff --git a/Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml b/Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml index 7db78767c02d..af35b77053df 100644 --- a/Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml +++ b/Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml @@ -34,8 +34,7 @@ properties: description: Value specifying the number of pulses per revolution of the controlled FAN. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 enum: [1, 2, 4] required: diff --git a/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml b/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml index 44a63fffb4be..eef614962b10 100644 --- a/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml +++ b/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml @@ -38,20 +38,18 @@ properties: the accumulated values, this entry can also have two items which sets energy1/charge1 and energy2/charger2 respectively. Check table 12 of the datasheet for more information on the supported options. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array - - minItems: 2 - maxItems: 2 - items: - enum: [0, 1, 2, 3] - default: 0 + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 2 + maxItems: 2 + items: + enum: [0, 1, 2, 3] + default: 0 adi,accumulation-deadband-microamp: description: This property controls the Accumulation Dead band which allows to set the level of current below which no accumulation takes place. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 maximum: 255 default: 0 @@ -61,8 +59,7 @@ properties: active high, setting it to zero makets it active low. When this property is present, the GPIO is automatically configured as output and set to control a fan as a function of measured temperature. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 enum: [0, 1] default: 0 @@ -74,13 +71,12 @@ properties: registers. Check table 13 of the datasheet for more information on the supported options. This property cannot be used together with adi,gpio-out-pol. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array - - minItems: 2 - maxItems: 2 - items: - enum: [0, 1, 2] - default: 0 + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 2 + maxItems: 2 + items: + enum: [0, 1, 2] + default: 0 required: - compatible diff --git a/Documentation/devicetree/bindings/hwmon/adt7475.yaml b/Documentation/devicetree/bindings/hwmon/adt7475.yaml index 46c441574f98..dfa821c0aacc 100644 --- a/Documentation/devicetree/bindings/hwmon/adt7475.yaml +++ b/Documentation/devicetree/bindings/hwmon/adt7475.yaml @@ -46,22 +46,20 @@ patternProperties: set to 1 the attenuator is bypassed if set to 0 the attenuator is not bypassed. If the property is absent then the attenuator retains it's configuration from the bios/bootloader. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [0, 1] + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1] "^adi,pwm-active-state$": description: | Integer array, represents the active state of the pwm outputs If set to 0 the pwm uses a logic low output for 100% duty cycle. If set to 1 the pwm uses a logic high output for 100% duty cycle. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array - - minItems: 3 - maxItems: 3 - items: - enum: [0, 1] - default: 1 + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 3 + maxItems: 3 + items: + enum: [0, 1] + default: 1 required: - compatible diff --git a/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml b/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml index 3f043e943668..90b2fa3f7752 100644 --- a/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml +++ b/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml @@ -45,16 +45,14 @@ properties: The gain value for the PGA function. This is 8, 4, 2 or 1. The PGA gain affect the shunt voltage range. The range will be equal to: pga-gain * 40mV - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 enum: [1, 2, 4, 8] default: 8 ti,bus-range-microvolt: description: | This is the operating range of the bus voltage in microvolt - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 enum: [16000000, 32000000] default: 32000000 @@ -63,14 +61,13 @@ properties: Array of three(TMP513) or two(TMP512) n-Factor value for each remote temperature channel. See datasheet Table 11 for n-Factor range list and value interpretation. - allOf: - - $ref: /schemas/types.yaml#definitions/uint32-array - - minItems: 2 - maxItems: 3 - items: - default: 0x00 - minimum: 0x00 - maximum: 0xFF + $ref: /schemas/types.yaml#definitions/uint32-array + minItems: 2 + maxItems: 3 + items: + default: 0x00 + minimum: 0x00 + maximum: 0xFF required: - compatible diff --git a/Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml b/Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml index ffe00737446e..7b3342354bbb 100644 --- a/Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml +++ b/Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml @@ -31,11 +31,10 @@ allOf: Fast Mode Plus speed is selected by slave. Format is phandle to syscfg / register offset within syscfg / register bitmask for FMP bit. - allOf: - - $ref: "/schemas/types.yaml#/definitions/phandle-array" - - items: - minItems: 3 - maxItems: 3 + $ref: "/schemas/types.yaml#/definitions/phandle-array" + items: + minItems: 3 + maxItems: 3 - if: properties: diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml index 97087a45ce54..deb34deff0e8 100644 --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml @@ -83,9 +83,8 @@ patternProperties: 1: REFIN2(+)/REFIN2(−). 3: AVDD If this field is left empty, internal reference is selected. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [0, 1, 3] + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 3] diff-channels: description: see Documentation/devicetree/bindings/iio/adc/adc.txt diff --git a/Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml b/Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml index 97f521d654ea..6a991e9f78e2 100644 --- a/Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml +++ b/Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml @@ -18,8 +18,7 @@ properties: vref-supply: description: phandle to an external regulator providing the reference voltage - allOf: - - $ref: /schemas/types.yaml#/definitions/phandle + $ref: /schemas/types.yaml#/definitions/phandle reg: description: spi chipselect number according to the usual spi bindings diff --git a/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml b/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml index 8ffeceb6abae..95ab285f4eba 100644 --- a/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml +++ b/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml @@ -38,10 +38,9 @@ properties: microchip,device-addr: description: Device address when multiple MCP3911 chips are present on the same SPI bus. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [0, 1, 2, 3] - - default: 0 + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + default: 0 vref-supply: description: | diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml index 933ba37944d7..c8b39f940984 100644 --- a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml @@ -76,8 +76,7 @@ properties: description: Phandle to system configuration controller. It can be used to control the analog circuitry on stm32mp1. - allOf: - - $ref: "/schemas/types.yaml#/definitions/phandle-array" + $ref: "/schemas/types.yaml#/definitions/phandle-array" interrupt-controller: true @@ -247,8 +246,7 @@ patternProperties: Resolution (bits) to use for conversions: - can be 6, 8, 10 or 12 on stm32f4 - can be 8, 10, 12, 14 or 16 on stm32h7 and stm32mp1 - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 st,adc-channels: description: | @@ -256,8 +254,7 @@ patternProperties: - 16 channels, numbered from 0 to 15 (for in0..in15) on stm32f4 - 20 channels, numbered from 0 to 19 (for in0..in19) on stm32h7 and stm32mp1. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array + $ref: /schemas/types.yaml#/definitions/uint32-array st,adc-diff-channels: description: | @@ -270,18 +267,17 @@ patternProperties: required. Both properties can be used together. Some channels can be used as single-ended and some other ones as differential (mixed). But channels can't be configured both as single-ended and differential. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-matrix - - items: - items: - - description: | - "vinp" indicates positive input number - minimum: 0 - maximum: 19 - - description: | - "vinn" indicates negative input number - minimum: 0 - maximum: 19 + $ref: /schemas/types.yaml#/definitions/uint32-matrix + items: + items: + - description: | + "vinp" indicates positive input number + minimum: 0 + maximum: 19 + - description: | + "vinn" indicates negative input number + minimum: 0 + maximum: 19 st,min-sample-time-nsecs: description: @@ -291,8 +287,7 @@ patternProperties: array that matches "st,adc-channels" and/or "st,adc-diff-channels" list, to set sample time resp. for all channels, or independently for each channel. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array + $ref: /schemas/types.yaml#/definitions/uint32-array allOf: - if: diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml b/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml index b1627441a0b2..d61bc011e820 100644 --- a/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml @@ -95,16 +95,14 @@ patternProperties: On stm32h7 and stm32mp1: - For st,stm32-dfsdm-adc: up to 8 channels numbered from 0 to 7. - For st,stm32-dfsdm-dmic: 1 channel numbered from 0 to 7. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array - - items: - minimum: 0 - maximum: 7 + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + minimum: 0 + maximum: 7 st,adc-channel-names: description: List of single-ended channel names. - allOf: - - $ref: /schemas/types.yaml#/definitions/string-array + $ref: /schemas/types.yaml#/definitions/string-array st,filter-order: description: | @@ -112,11 +110,10 @@ patternProperties: - 0: FastSinC - [1-5]: order 1 to 5. For audio purpose it is recommended to use order 3 to 5. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - items: - minimum: 0 - maximum: 5 + $ref: /schemas/types.yaml#/definitions/uint32 + items: + minimum: 0 + maximum: 5 "#io-channel-cells": const: 1 @@ -130,8 +127,7 @@ patternProperties: - "MANCH_F": manchester codec, rising edge = logic 1, falling edge = logic 0 items: enum: [ SPI_R, SPI_F, MANCH_R, MANCH_F ] - allOf: - - $ref: /schemas/types.yaml#/definitions/non-unique-string-array + $ref: /schemas/types.yaml#/definitions/non-unique-string-array st,adc-channel-clk-src: description: | @@ -142,8 +138,7 @@ patternProperties: - "CLKOUT_R": internal SPI clock divided by 2 (rising edge). items: enum: [ CLKIN, CLKOUT, CLKOUT_F, CLKOUT_R ] - allOf: - - $ref: /schemas/types.yaml#/definitions/non-unique-string-array + $ref: /schemas/types.yaml#/definitions/non-unique-string-array st,adc-alt-channel: description: diff --git a/Documentation/devicetree/bindings/iio/light/tsl2772.yaml b/Documentation/devicetree/bindings/iio/light/tsl2772.yaml index e8f7d1ada57b..d81229857944 100644 --- a/Documentation/devicetree/bindings/iio/light/tsl2772.yaml +++ b/Documentation/devicetree/bindings/iio/light/tsl2772.yaml @@ -33,13 +33,12 @@ properties: amstaos,proximity-diodes: description: Proximity diodes to enable - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array - - minItems: 1 - maxItems: 2 - items: - minimum: 0 - maximum: 1 + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 2 + items: + minimum: 0 + maximum: 1 interrupts: maxItems: 1 diff --git a/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml b/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml index 04da5c48a5e9..40ccbe7b5c13 100644 --- a/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml +++ b/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml @@ -42,10 +42,9 @@ properties: 0 - 50/60Hz rejection 1 - 60Hz rejection 2 - 50Hz rejection - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - minimum: 0 - maximum: 2 + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 2 '#address-cells': const: 1 @@ -91,8 +90,7 @@ patternProperties: 7 - Type T Thermocouple 8 - Type B Thermocouple 9 - Custom Thermocouple - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 1 maximum: 9 @@ -121,8 +119,7 @@ patternProperties: more details look at table 69 and 70. Note should be signed, but dtc doesn't currently maintain the sign. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint64-matrix + $ref: /schemas/types.yaml#/definitions/uint64-matrix minItems: 3 maxItems: 64 items: @@ -138,8 +135,7 @@ patternProperties: properties: adi,sensor-type: description: Identifies the sensor as a diode. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 const: 28 adi,single-ended: @@ -196,8 +192,7 @@ patternProperties: 16 - RTD PT-1000 (0.00375) 17 - RTD NI-120 18 - RTD Custom - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 10 maximum: 18 @@ -210,9 +205,8 @@ patternProperties: description: Identifies the number of wires used by the RTD. Setting this property to 5 means 4 wires with Kelvin Rsense. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [2, 3, 4, 5] + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [2, 3, 4, 5] adi,rsense-share: description: @@ -237,18 +231,16 @@ patternProperties: description: This property set the RTD curve used and the corresponding Callendar-VanDusen constants. Look at table 30 of the datasheet. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - minimum: 0 - maximum: 3 + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 3 adi,custom-rtd: description: This is a table, where each entry should be a pair of resistance(ohm)-temperature(K). The entries added here are in uohm and uK. For more details values look at table 74 and 75. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint64-matrix + $ref: /schemas/types.yaml#/definitions/uint64-matrix items: minItems: 3 maxItems: 64 @@ -280,8 +272,7 @@ patternProperties: 25 - Thermistor Spectrum 1003k 1kohm 26 - Thermistor Custom Steinhart-Hart 27 - Custom Thermistor - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 19 maximum: 27 @@ -314,10 +305,9 @@ patternProperties: This property controls the magnitude of the excitation current applied to the thermistor. Value 0 set's the sensor in auto-range mode. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [0, 250, 500, 1000, 5000, 10000, 25000, 50000, 100000, - 250000, 500000, 1000000] + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 250, 500, 1000, 5000, 10000, 25000, 50000, 100000, 250000, + 500000, 1000000] adi,custom-thermistor: description: @@ -325,8 +315,7 @@ patternProperties: resistance(ohm)-temperature(K). The entries added here are in uohm and uK only for custom thermistors. For more details look at table 78 and 79. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint64-matrix + $ref: /schemas/types.yaml#/definitions/uint64-matrix minItems: 3 maxItems: 64 items: @@ -339,8 +328,7 @@ patternProperties: be programmed into the device memory using this property. For Steinhart sensors the coefficients are given in the raw format. Look at table 82 for more information. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array + $ref: /schemas/types.yaml#/definitions/uint32-array items: minItems: 6 maxItems: 6 @@ -358,8 +346,7 @@ patternProperties: properties: adi,sensor-type: description: Identifies the sensor as a direct adc. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 const: 30 adi,single-ended: @@ -379,8 +366,7 @@ patternProperties: adi,sensor-type: description: Identifies the sensor as a rsense. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 const: 29 adi,rsense-val-milli-ohms: diff --git a/Documentation/devicetree/bindings/input/allwinner,sun4i-a10-lradc-keys.yaml b/Documentation/devicetree/bindings/input/allwinner,sun4i-a10-lradc-keys.yaml index 512a6af5aa42..cffd02028d02 100644 --- a/Documentation/devicetree/bindings/input/allwinner,sun4i-a10-lradc-keys.yaml +++ b/Documentation/devicetree/bindings/input/allwinner,sun4i-a10-lradc-keys.yaml @@ -42,9 +42,8 @@ patternProperties: description: Keycode to emit channel: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [0, 1] + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1] description: ADC Channel this key is attached to voltage: diff --git a/Documentation/devicetree/bindings/input/gpio-keys.yaml b/Documentation/devicetree/bindings/input/gpio-keys.yaml index c0b389572340..6966ab009fa3 100644 --- a/Documentation/devicetree/bindings/input/gpio-keys.yaml +++ b/Documentation/devicetree/bindings/input/gpio-keys.yaml @@ -20,8 +20,7 @@ patternProperties: if: type: object then: - allOf: - - $ref: input.yaml# + $ref: input.yaml# properties: gpios: @@ -41,8 +40,8 @@ patternProperties: description: Specify event type this button/key generates. If not specified defaults to <1> == EV_KEY. - allOf: - - $ref: /schemas/types.yaml#definitions/uint32 + $ref: /schemas/types.yaml#definitions/uint32 + default: 1 linux,input-value: @@ -57,14 +56,13 @@ patternProperties: linux,input-value = <0xffffffff>; /* -1 */ - allOf: - - $ref: /schemas/types.yaml#definitions/uint32 + $ref: /schemas/types.yaml#definitions/uint32 debounce-interval: description: Debouncing interval time in milliseconds. If not specified defaults to 5. - allOf: - - $ref: /schemas/types.yaml#definitions/uint32 + $ref: /schemas/types.yaml#definitions/uint32 + default: 5 wakeup-source: @@ -81,9 +79,8 @@ patternProperties: EV_ACT_ANY - both asserted and deasserted EV_ACT_ASSERTED - asserted EV_ACT_DEASSERTED - deasserted - allOf: - - $ref: /schemas/types.yaml#definitions/uint32 - enum: [ 0, 1, 2 ] + $ref: /schemas/types.yaml#definitions/uint32 + enum: [0, 1, 2] linux,can-disable: description: diff --git a/Documentation/devicetree/bindings/input/input.yaml b/Documentation/devicetree/bindings/input/input.yaml index 6d519046b3af..8edcb3c31270 100644 --- a/Documentation/devicetree/bindings/input/input.yaml +++ b/Documentation/devicetree/bindings/input/input.yaml @@ -18,11 +18,10 @@ properties: description: Specifies an array of numeric keycode values to be used for reporting button presses. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array - - items: - minimum: 0 - maximum: 0xff + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + minimum: 0 + maximum: 0xff poll-interval: description: Poll interval time in milliseconds. diff --git a/Documentation/devicetree/bindings/input/iqs62x-keys.yaml b/Documentation/devicetree/bindings/input/iqs62x-keys.yaml index 5625c222903a..77fe3b545b35 100644 --- a/Documentation/devicetree/bindings/input/iqs62x-keys.yaml +++ b/Documentation/devicetree/bindings/input/iqs62x-keys.yaml @@ -30,10 +30,9 @@ properties: - azoteq,iqs625-keys linux,keycodes: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array - - minItems: 1 - maxItems: 16 + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 16 description: | Specifies the numeric keycodes associated with each available touch or proximity event according to the following table. An 'x' indicates the diff --git a/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml b/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml index 383d64a91854..2aac76c25c11 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml +++ b/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml @@ -61,33 +61,29 @@ properties: gain: description: Allows setting the sensitivity in the range from 0 to 31. Note that lower values indicate higher sensitivity. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - minimum: 0 - - maximum: 31 + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 31 offset: description: Allows setting the edge compensation in the range from 0 to 31. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - minimum: 0 - - maximum: 31 + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 31 offset-x: description: Same as offset, but applies only to the horizontal position. Range from 0 to 80, only supported by evervision,ev-ft5726 devices. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - minimum: 0 - - maximum: 80 + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 80 offset-y: description: Same as offset, but applies only to the vertical position. Range from 0 to 80, only supported by evervision,ev-ft5726 devices. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - minimum: 0 - - maximum: 80 + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 80 touchscreen-size-x: true touchscreen-size-y: true diff --git a/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml b/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml index 66aacd106503..1ecd1831cf02 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml @@ -91,18 +91,16 @@ properties: description: If using padding pages, specifies the stride of consecutive redistributors. Must be a multiple of 64kB. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint64 - - multipleOf: 0x10000 - exclusiveMinimum: 0 + $ref: /schemas/types.yaml#/definitions/uint64 + multipleOf: 0x10000 + exclusiveMinimum: 0 "#redistributor-regions": description: The number of independent contiguous regions occupied by the redistributors. Required if more than one such region is present. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - maximum: 4096 # Should be enough? + $ref: /schemas/types.yaml#/definitions/uint32 + maximum: 4096 msi-controller: description: @@ -114,22 +112,20 @@ properties: A list of pairs , where "intid" is the first SPI of a range that can be used an MBI, and "span" the size of that range. Multiple ranges can be provided. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-matrix - - items: - minItems: 2 - maxItems: 2 + $ref: /schemas/types.yaml#/definitions/uint32-matrix + items: + minItems: 2 + maxItems: 2 mbi-alias: description: Address property. Base address of an alias of the GICD region containing only the {SET,CLR}SPI registers to be used if isolation is required, and if supported by the HW. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array - - items: - minItems: 1 - maxItems: 2 + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + minItems: 1 + maxItems: 2 ppi-partitions: type: object @@ -188,11 +184,10 @@ patternProperties: description: (u32, u32) tuple describing the untranslated address and size of the pre-ITS window. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array - - items: - minItems: 2 - maxItems: 2 + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + minItems: 2 + maxItems: 2 required: - compatible diff --git a/Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.yaml b/Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.yaml index 26f1fcf0857a..b1db21ed44e9 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.yaml @@ -54,11 +54,9 @@ properties: and each bit in the cell refers to a children interrupt fron 0 to 31. If a CPU interrupt line didn't connected with liointc, then keep it's cell with zero. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array - - minItems: 4 - maxItems: 4 - + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 4 + maxItems: 4 required: - compatible diff --git a/Documentation/devicetree/bindings/iommu/arm,smmu.yaml b/Documentation/devicetree/bindings/iommu/arm,smmu.yaml index 6515dbe47508..3aa554878b90 100644 --- a/Documentation/devicetree/bindings/iommu/arm,smmu.yaml +++ b/Documentation/devicetree/bindings/iommu/arm,smmu.yaml @@ -56,8 +56,7 @@ properties: '#global-interrupts': description: The number of global interrupts exposed by the device. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 0 maximum: 260 # 2 secure, 2 non-secure, and up to 256 perf counters diff --git a/Documentation/devicetree/bindings/leds/common.yaml b/Documentation/devicetree/bindings/leds/common.yaml index 4c270fde4567..a2a541bca73c 100644 --- a/Documentation/devicetree/bindings/leds/common.yaml +++ b/Documentation/devicetree/bindings/leds/common.yaml @@ -41,8 +41,7 @@ properties: Color of the LED. Use one of the LED_COLOR_ID_* prefixed definitions from the header include/dt-bindings/leds/common.h. If there is no matching LED_COLOR_ID available, add a new one. - allOf: - - $ref: /schemas/types.yaml#definitions/uint32 + $ref: /schemas/types.yaml#definitions/uint32 minimum: 0 maximum: 8 @@ -67,8 +66,7 @@ properties: produced where the LED momentarily turns off (or on). The "keep" setting will keep the LED at whatever its current state is, without producing a glitch. - allOf: - - $ref: /schemas/types.yaml#definitions/string + $ref: /schemas/types.yaml#definitions/string enum: - on - off @@ -79,8 +77,8 @@ properties: description: This parameter, if present, is a string defining the trigger assigned to the LED. - allOf: - - $ref: /schemas/types.yaml#definitions/string + $ref: /schemas/types.yaml#definitions/string + enum: # LED will act as a back-light, controlled by the framebuffer system - backlight @@ -111,8 +109,7 @@ properties: brightness and duration (in ms). The exact format is described in: Documentation/devicetree/bindings/leds/leds-trigger-pattern.txt - allOf: - - $ref: /schemas/types.yaml#definitions/uint32-matrix + $ref: /schemas/types.yaml#definitions/uint32-matrix items: minItems: 2 maxItems: 2 diff --git a/Documentation/devicetree/bindings/leds/leds-gpio.yaml b/Documentation/devicetree/bindings/leds/leds-gpio.yaml index 0e75b185dd19..7ad2baeda0b0 100644 --- a/Documentation/devicetree/bindings/leds/leds-gpio.yaml +++ b/Documentation/devicetree/bindings/leds/leds-gpio.yaml @@ -24,8 +24,7 @@ patternProperties: "(^led-[0-9a-f]$|led)": type: object - allOf: - - $ref: common.yaml# + $ref: common.yaml# properties: gpios: diff --git a/Documentation/devicetree/bindings/leds/rohm,bd71828-leds.yaml b/Documentation/devicetree/bindings/leds/rohm,bd71828-leds.yaml index 90edf9d33b33..86a37c92b834 100644 --- a/Documentation/devicetree/bindings/leds/rohm,bd71828-leds.yaml +++ b/Documentation/devicetree/bindings/leds/rohm,bd71828-leds.yaml @@ -34,11 +34,10 @@ patternProperties: #- $ref: "common.yaml#" rohm,led-compatible: description: LED identification string - allOf: - - $ref: "/schemas/types.yaml#/definitions/string" - - enum: - - bd71828-ambled - - bd71828-grnled + $ref: "/schemas/types.yaml#/definitions/string" + enum: + - bd71828-ambled + - bd71828-grnled function: description: Purpose of LED as defined in dt-bindings/leds/common.h diff --git a/Documentation/devicetree/bindings/mailbox/st,stm32-ipcc.yaml b/Documentation/devicetree/bindings/mailbox/st,stm32-ipcc.yaml index db851541d619..3b7ab61a144f 100644 --- a/Documentation/devicetree/bindings/mailbox/st,stm32-ipcc.yaml +++ b/Documentation/devicetree/bindings/mailbox/st,stm32-ipcc.yaml @@ -49,9 +49,8 @@ properties: st,proc-id: description: Processor id using the mailbox (0 or 1) - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [ 0, 1 ] + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1] required: - compatible diff --git a/Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml b/Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml index 5a1da4029c37..b902495d278b 100644 --- a/Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml +++ b/Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml @@ -77,13 +77,11 @@ properties: amlogic,ao-sysctrl: description: should point to the AOBUS sysctrl node - allOf: - - $ref: /schemas/types.yaml#/definitions/phandle + $ref: /schemas/types.yaml#/definitions/phandle amlogic,canvas: description: should point to a canvas provider node - allOf: - - $ref: /schemas/types.yaml#/definitions/phandle + $ref: /schemas/types.yaml#/definitions/phandle allOf: - if: diff --git a/Documentation/devicetree/bindings/media/amlogic,meson-gx-ao-cec.yaml b/Documentation/devicetree/bindings/media/amlogic,meson-gx-ao-cec.yaml index 95ffa8bc0533..c08e2ddf292a 100644 --- a/Documentation/devicetree/bindings/media/amlogic,meson-gx-ao-cec.yaml +++ b/Documentation/devicetree/bindings/media/amlogic,meson-gx-ao-cec.yaml @@ -35,8 +35,7 @@ properties: hdmi-phandle: description: phandle to the HDMI controller - allOf: - - $ref: /schemas/types.yaml#/definitions/phandle + $ref: /schemas/types.yaml#/definitions/phandle allOf: - if: diff --git a/Documentation/devicetree/bindings/media/i2c/imx219.yaml b/Documentation/devicetree/bindings/media/i2c/imx219.yaml index 32d6b693274f..dfc4d29a4f04 100644 --- a/Documentation/devicetree/bindings/media/i2c/imx219.yaml +++ b/Documentation/devicetree/bindings/media/i2c/imx219.yaml @@ -67,8 +67,7 @@ properties: otherwise it's continuous. link-frequencies: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint64-array + $ref: /schemas/types.yaml#/definitions/uint64-array description: Allowed data bus frequencies. diff --git a/Documentation/devicetree/bindings/media/rc.yaml b/Documentation/devicetree/bindings/media/rc.yaml index b27c9385d490..ded2ac43237d 100644 --- a/Documentation/devicetree/bindings/media/rc.yaml +++ b/Documentation/devicetree/bindings/media/rc.yaml @@ -18,136 +18,135 @@ properties: description: Specifies the scancode/key mapping table defined in-kernel for the remote controller. - allOf: - - $ref: '/schemas/types.yaml#/definitions/string' - - enum: - - rc-adstech-dvb-t-pci - - rc-alink-dtu-m - - rc-anysee - - rc-apac-viewcomp - - rc-astrometa-t2hybrid - - rc-asus-pc39 - - rc-asus-ps3-100 - - rc-ati-tv-wonder-hd-600 - - rc-ati-x10 - - rc-avermedia - - rc-avermedia-a16d - - rc-avermedia-cardbus - - rc-avermedia-dvbt - - rc-avermedia-m135a - - rc-avermedia-m733a-rm-k6 - - rc-avermedia-rm-ks - - rc-avertv-303 - - rc-azurewave-ad-tu700 - - rc-beelink-gs1 - - rc-behold - - rc-behold-columbus - - rc-budget-ci-old - - rc-cec - - rc-cinergy - - rc-cinergy-1400 - - rc-d680-dmb - - rc-delock-61959 - - rc-dib0700-nec - - rc-dib0700-rc5 - - rc-digitalnow-tinytwin - - rc-digittrade - - rc-dm1105-nec - - rc-dntv-live-dvb-t - - rc-dntv-live-dvbt-pro - - rc-dtt200u - - rc-dvbsky - - rc-dvico-mce - - rc-dvico-portable - - rc-em-terratec - - rc-empty - - rc-encore-enltv - - rc-encore-enltv-fm53 - - rc-encore-enltv2 - - rc-evga-indtube - - rc-eztv - - rc-flydvb - - rc-flyvideo - - rc-fusionhdtv-mce - - rc-gadmei-rm008z - - rc-geekbox - - rc-genius-tvgo-a11mce - - rc-gotview7135 - - rc-hauppauge - - rc-hisi-poplar - - rc-hisi-tv-demo - - rc-imon-mce - - rc-imon-pad - - rc-imon-rsc - - rc-iodata-bctv7e - - rc-it913x-v1 - - rc-it913x-v2 - - rc-kaiomy - - rc-khadas - - rc-kworld-315u - - rc-kworld-pc150u - - rc-kworld-plus-tv-analog - - rc-leadtek-y04g0051 - - rc-lme2510 - - rc-manli - - rc-medion-x10 - - rc-medion-x10-digitainer - - rc-medion-x10-or2x - - rc-msi-digivox-ii - - rc-msi-digivox-iii - - rc-msi-tvanywhere - - rc-msi-tvanywhere-plus - - rc-nebula - - rc-nec-terratec-cinergy-xs - - rc-norwood - - rc-npgtech - - rc-odroid - - rc-pctv-sedna - - rc-pinnacle-color - - rc-pinnacle-grey - - rc-pinnacle-pctv-hd - - rc-pixelview - - rc-pixelview-002t - - rc-pixelview-mk12 - - rc-pixelview-new - - rc-powercolor-real-angel - - rc-proteus-2309 - - rc-purpletv - - rc-pv951 - - rc-rc5-tv - - rc-rc6-mce - - rc-real-audio-220-32-keys - - rc-reddo - - rc-snapstream-firefly - - rc-streamzap - - rc-su3000 - - rc-tango - - rc-tanix-tx3mini - - rc-tanix-tx5max - - rc-tbs-nec - - rc-technisat-ts35 - - rc-technisat-usb2 - - rc-terratec-cinergy-c-pci - - rc-terratec-cinergy-s2-hd - - rc-terratec-cinergy-xs - - rc-terratec-slim - - rc-terratec-slim-2 - - rc-tevii-nec - - rc-tivo - - rc-total-media-in-hand - - rc-total-media-in-hand-02 - - rc-trekstor - - rc-tt-1500 - - rc-twinhan-dtv-cab-ci - - rc-twinhan1027 - - rc-videomate-k100 - - rc-videomate-s350 - - rc-videomate-tv-pvr - - rc-videostrong-kii-pro - - rc-wetek-hub - - rc-wetek-play2 - - rc-winfast - - rc-winfast-usbii-deluxe - - rc-x96max - - rc-xbox-dvd - - rc-zx-irdec + $ref: '/schemas/types.yaml#/definitions/string' + enum: + - rc-adstech-dvb-t-pci + - rc-alink-dtu-m + - rc-anysee + - rc-apac-viewcomp + - rc-astrometa-t2hybrid + - rc-asus-pc39 + - rc-asus-ps3-100 + - rc-ati-tv-wonder-hd-600 + - rc-ati-x10 + - rc-avermedia + - rc-avermedia-a16d + - rc-avermedia-cardbus + - rc-avermedia-dvbt + - rc-avermedia-m135a + - rc-avermedia-m733a-rm-k6 + - rc-avermedia-rm-ks + - rc-avertv-303 + - rc-azurewave-ad-tu700 + - rc-beelink-gs1 + - rc-behold + - rc-behold-columbus + - rc-budget-ci-old + - rc-cec + - rc-cinergy + - rc-cinergy-1400 + - rc-d680-dmb + - rc-delock-61959 + - rc-dib0700-nec + - rc-dib0700-rc5 + - rc-digitalnow-tinytwin + - rc-digittrade + - rc-dm1105-nec + - rc-dntv-live-dvb-t + - rc-dntv-live-dvbt-pro + - rc-dtt200u + - rc-dvbsky + - rc-dvico-mce + - rc-dvico-portable + - rc-em-terratec + - rc-empty + - rc-encore-enltv + - rc-encore-enltv-fm53 + - rc-encore-enltv2 + - rc-evga-indtube + - rc-eztv + - rc-flydvb + - rc-flyvideo + - rc-fusionhdtv-mce + - rc-gadmei-rm008z + - rc-geekbox + - rc-genius-tvgo-a11mce + - rc-gotview7135 + - rc-hauppauge + - rc-hisi-poplar + - rc-hisi-tv-demo + - rc-imon-mce + - rc-imon-pad + - rc-imon-rsc + - rc-iodata-bctv7e + - rc-it913x-v1 + - rc-it913x-v2 + - rc-kaiomy + - rc-khadas + - rc-kworld-315u + - rc-kworld-pc150u + - rc-kworld-plus-tv-analog + - rc-leadtek-y04g0051 + - rc-lme2510 + - rc-manli + - rc-medion-x10 + - rc-medion-x10-digitainer + - rc-medion-x10-or2x + - rc-msi-digivox-ii + - rc-msi-digivox-iii + - rc-msi-tvanywhere + - rc-msi-tvanywhere-plus + - rc-nebula + - rc-nec-terratec-cinergy-xs + - rc-norwood + - rc-npgtech + - rc-odroid + - rc-pctv-sedna + - rc-pinnacle-color + - rc-pinnacle-grey + - rc-pinnacle-pctv-hd + - rc-pixelview + - rc-pixelview-002t + - rc-pixelview-mk12 + - rc-pixelview-new + - rc-powercolor-real-angel + - rc-proteus-2309 + - rc-purpletv + - rc-pv951 + - rc-rc5-tv + - rc-rc6-mce + - rc-real-audio-220-32-keys + - rc-reddo + - rc-snapstream-firefly + - rc-streamzap + - rc-su3000 + - rc-tango + - rc-tanix-tx3mini + - rc-tanix-tx5max + - rc-tbs-nec + - rc-technisat-ts35 + - rc-technisat-usb2 + - rc-terratec-cinergy-c-pci + - rc-terratec-cinergy-s2-hd + - rc-terratec-cinergy-xs + - rc-terratec-slim + - rc-terratec-slim-2 + - rc-tevii-nec + - rc-tivo + - rc-total-media-in-hand + - rc-total-media-in-hand-02 + - rc-trekstor + - rc-tt-1500 + - rc-twinhan-dtv-cab-ci + - rc-twinhan1027 + - rc-videomate-k100 + - rc-videomate-s350 + - rc-videomate-tv-pvr + - rc-videostrong-kii-pro + - rc-wetek-hub + - rc-wetek-play2 + - rc-winfast + - rc-winfast-usbii-deluxe + - rc-x96max + - rc-xbox-dvd + - rc-zx-irdec diff --git a/Documentation/devicetree/bindings/media/renesas,vin.yaml b/Documentation/devicetree/bindings/media/renesas,vin.yaml index ecc09f1124d4..6d473cdcb16a 100644 --- a/Documentation/devicetree/bindings/media/renesas,vin.yaml +++ b/Documentation/devicetree/bindings/media/renesas,vin.yaml @@ -116,10 +116,9 @@ properties: #The per-board settings for Gen3 and RZ/G2 platforms: renesas,id: description: VIN channel number - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - minimum: 0 - - maximum: 15 + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 15 ports: type: object diff --git a/Documentation/devicetree/bindings/memory-controllers/exynos-srom.yaml b/Documentation/devicetree/bindings/memory-controllers/exynos-srom.yaml index 1250087b4ee6..637e24f0f73b 100644 --- a/Documentation/devicetree/bindings/memory-controllers/exynos-srom.yaml +++ b/Documentation/devicetree/bindings/memory-controllers/exynos-srom.yaml @@ -62,11 +62,10 @@ patternProperties: type: boolean samsung,srom-timing: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array - - items: - minItems: 6 - maxItems: 6 + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + minItems: 6 + maxItems: 6 description: | Array of 6 integers, specifying bank timings in the following order: Tacp, Tcah, Tcoh, Tacc, Tcos, Tacs. diff --git a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra124-emc.yaml b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra124-emc.yaml index 3e0a8a92d652..a3b36dea88b6 100644 --- a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra124-emc.yaml +++ b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra124-emc.yaml @@ -73,10 +73,9 @@ patternProperties: timings nvidia,emc-auto-cal-interval: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 description: pad calibration interval in microseconds + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 0 maximum: 2097151 @@ -136,11 +135,10 @@ patternProperties: value of the EMC_XM2DQSPADCTRL2 register for this set of timings nvidia,emc-zcal-cnt-long: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 description: number of EMC clocks to wait before issuing any commands after clock change + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 0 maximum: 1023 @@ -150,12 +148,11 @@ patternProperties: value of the EMC_ZCAL_INTERVAL register for this set of timings nvidia,emc-configuration: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array description: EMC timing characterization data. These are the registers (see section "15.6.2 EMC Registers" in the TRM) whose values need to be specified, according to the board documentation. + $ref: /schemas/types.yaml#/definitions/uint32-array items: - description: EMC_RC - description: EMC_RFC diff --git a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra124-mc.yaml b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra124-mc.yaml index 22a94b6fdbde..30d9fb193d7f 100644 --- a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra124-mc.yaml +++ b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra124-mc.yaml @@ -60,8 +60,7 @@ patternProperties: maximum: 1066000000 nvidia,emem-configuration: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array + $ref: /schemas/types.yaml#/definitions/uint32-array description: | Values to be written to the EMEM register block. See section "15.6.1 MC Registers" in the TRM. diff --git a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra30-emc.yaml b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra30-emc.yaml index e4135bac6957..112bae2fcbbd 100644 --- a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra30-emc.yaml +++ b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra30-emc.yaml @@ -56,10 +56,9 @@ patternProperties: maximum: 900000000 nvidia,emc-auto-cal-interval: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 description: Pad calibration interval in microseconds. + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 0 maximum: 2097151 @@ -79,11 +78,10 @@ patternProperties: Mode Register 0. nvidia,emc-zcal-cnt-long: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 description: Number of EMC clocks to wait before issuing any commands after sending ZCAL_MRW_CMD. + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 0 maximum: 1023 @@ -98,12 +96,11 @@ patternProperties: FBIO "read" FIFO periodic resetting enabled. nvidia,emc-configuration: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array description: EMC timing characterization data. These are the registers (see section "18.13.2 EMC Registers" in the TRM) whose values need to be specified, according to the board documentation. + $ref: /schemas/types.yaml#/definitions/uint32-array items: - description: EMC_RC - description: EMC_RFC diff --git a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra30-mc.yaml b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra30-mc.yaml index 4b9196c83291..84fd57bcf0dc 100644 --- a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra30-mc.yaml +++ b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra30-mc.yaml @@ -77,8 +77,7 @@ patternProperties: maximum: 900000000 nvidia,emem-configuration: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array + $ref: /schemas/types.yaml#/definitions/uint32-array description: | Values to be written to the EMEM register block. See section "18.13.1 MC Registers" in the TRM. diff --git a/Documentation/devicetree/bindings/mfd/allwinner,sun4i-a10-ts.yaml b/Documentation/devicetree/bindings/mfd/allwinner,sun4i-a10-ts.yaml index 39afacc447b2..f591332fc462 100644 --- a/Documentation/devicetree/bindings/mfd/allwinner,sun4i-a10-ts.yaml +++ b/Documentation/devicetree/bindings/mfd/allwinner,sun4i-a10-ts.yaml @@ -31,19 +31,19 @@ properties: description: A touchscreen is attached to the controller allwinner,tp-sensitive-adjust: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - minimum: 0 - maximum: 15 - default: 15 + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 15 + default: 15 + description: Sensitivity of pen down detection allwinner,filter-type: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - minimum: 0 - maximum: 3 - default: 1 + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 3 + default: 1 + description: | Select median and averaging filter. Sample used for median / averaging filter: diff --git a/Documentation/devicetree/bindings/mfd/st,stm32-timers.yaml b/Documentation/devicetree/bindings/mfd/st,stm32-timers.yaml index 4acda7ce3b44..f212fc6e1661 100644 --- a/Documentation/devicetree/bindings/mfd/st,stm32-timers.yaml +++ b/Documentation/devicetree/bindings/mfd/st,stm32-timers.yaml @@ -67,23 +67,22 @@ properties: description: One or two to describe break input configurations. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-matrix - - items: - items: - - description: | - "index" indicates on which break input (0 or 1) the - configuration should be applied. - enum: [ 0 , 1] - - description: | - "level" gives the active level (0=low or 1=high) of the - input signal for this configuration - enum: [ 0, 1 ] - - description: | - "filter" gives the filtering value (up to 15) to be applied. - maximum: 15 - minItems: 1 - maxItems: 2 + $ref: /schemas/types.yaml#/definitions/uint32-matrix + items: + items: + - description: | + "index" indicates on which break input (0 or 1) the + configuration should be applied. + enum: [0, 1] + - description: | + "level" gives the active level (0=low or 1=high) of the + input signal for this configuration + enum: [0, 1] + - description: | + "filter" gives the filtering value (up to 15) to be applied. + maximum: 15 + minItems: 1 + maxItems: 2 required: - "#pwm-cells" diff --git a/Documentation/devicetree/bindings/mfd/st,stpmic1.yaml b/Documentation/devicetree/bindings/mfd/st,stpmic1.yaml index be7faa6dc055..dd995d7dc1a6 100644 --- a/Documentation/devicetree/bindings/mfd/st,stpmic1.yaml +++ b/Documentation/devicetree/bindings/mfd/st,stpmic1.yaml @@ -29,8 +29,7 @@ properties: onkey: type: object - allOf: - - $ref: ../input/input.yaml + $ref: ../input/input.yaml properties: compatible: @@ -68,8 +67,7 @@ properties: watchdog: type: object - allOf: - - $ref: ../watchdog/watchdog.yaml + $ref: ../watchdog/watchdog.yaml properties: compatible: @@ -190,8 +188,7 @@ properties: description: STPMIC1 voltage regulators supplies "^(buck[1-4]|ldo[1-6]|boost|vref_ddr|pwr_sw[1-2])$": - allOf: - - $ref: ../regulator/regulator.yaml + $ref: ../regulator/regulator.yaml "^ldo[1-2,5-6]$": type: object diff --git a/Documentation/devicetree/bindings/mfd/syscon.yaml b/Documentation/devicetree/bindings/mfd/syscon.yaml index 7a39486b215a..19bdaf781853 100644 --- a/Documentation/devicetree/bindings/mfd/syscon.yaml +++ b/Documentation/devicetree/bindings/mfd/syscon.yaml @@ -52,9 +52,8 @@ properties: description: | The size (in bytes) of the IO accesses that should be performed on the device. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [ 1, 2, 4, 8 ] + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [1, 2, 4, 8] hwlocks: maxItems: 1 diff --git a/Documentation/devicetree/bindings/mmc/aspeed,sdhci.yaml b/Documentation/devicetree/bindings/mmc/aspeed,sdhci.yaml index 200de9396036..987b287f3bff 100644 --- a/Documentation/devicetree/bindings/mmc/aspeed,sdhci.yaml +++ b/Documentation/devicetree/bindings/mmc/aspeed,sdhci.yaml @@ -41,8 +41,8 @@ properties: patternProperties: "^sdhci@[0-9a-f]+$": type: object - allOf: - - $ref: mmc-controller.yaml + $ref: mmc-controller.yaml + properties: compatible: enum: diff --git a/Documentation/devicetree/bindings/mmc/cdns,sdhci.yaml b/Documentation/devicetree/bindings/mmc/cdns,sdhci.yaml index d43a0c557a44..d93f7794a85f 100644 --- a/Documentation/devicetree/bindings/mmc/cdns,sdhci.yaml +++ b/Documentation/devicetree/bindings/mmc/cdns,sdhci.yaml @@ -36,91 +36,80 @@ properties: cdns,phy-input-delay-sd-highspeed: description: Value of the delay in the input path for SD high-speed timing - allOf: - - $ref: "/schemas/types.yaml#/definitions/uint32" - - minimum: 0 - - maximum: 0x1f + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0 + maximum: 0x1f cdns,phy-input-delay-legacy: description: Value of the delay in the input path for legacy timing - allOf: - - $ref: "/schemas/types.yaml#/definitions/uint32" - - minimum: 0 - - maximum: 0x1f + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0 + maximum: 0x1f cdns,phy-input-delay-sd-uhs-sdr12: description: Value of the delay in the input path for SD UHS SDR12 timing - allOf: - - $ref: "/schemas/types.yaml#/definitions/uint32" - - minimum: 0 - - maximum: 0x1f + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0 + maximum: 0x1f cdns,phy-input-delay-sd-uhs-sdr25: description: Value of the delay in the input path for SD UHS SDR25 timing - allOf: - - $ref: "/schemas/types.yaml#/definitions/uint32" - - minimum: 0 - - maximum: 0x1f + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0 + maximum: 0x1f cdns,phy-input-delay-sd-uhs-sdr50: description: Value of the delay in the input path for SD UHS SDR50 timing - allOf: - - $ref: "/schemas/types.yaml#/definitions/uint32" - - minimum: 0 - - maximum: 0x1f + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0 + maximum: 0x1f cdns,phy-input-delay-sd-uhs-ddr50: description: Value of the delay in the input path for SD UHS DDR50 timing - allOf: - - $ref: "/schemas/types.yaml#/definitions/uint32" - - minimum: 0 - - maximum: 0x1f + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0 + maximum: 0x1f cdns,phy-input-delay-mmc-highspeed: description: Value of the delay in the input path for MMC high-speed timing - allOf: - - $ref: "/schemas/types.yaml#/definitions/uint32" - - minimum: 0 - - maximum: 0x1f + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0 + maximum: 0x1f cdns,phy-input-delay-mmc-ddr: description: Value of the delay in the input path for eMMC high-speed DDR timing - allOf: - - $ref: "/schemas/types.yaml#/definitions/uint32" - - minimum: 0 - - maximum: 0x1f # PHY DLL clock delays: # Each delay property represents the fraction of the clock period. # The approximate delay value will be # (/128)*sdmclk_clock_period. + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0 + maximum: 0x1f cdns,phy-dll-delay-sdclk: description: | Value of the delay introduced on the sdclk output for all modes except HS200, HS400 and HS400_ES. - allOf: - - $ref: "/schemas/types.yaml#/definitions/uint32" - - minimum: 0 - - maximum: 0x7f + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0 + maximum: 0x7f cdns,phy-dll-delay-sdclk-hsmmc: description: | Value of the delay introduced on the sdclk output for HS200, HS400 and HS400_ES speed modes. - allOf: - - $ref: "/schemas/types.yaml#/definitions/uint32" - - minimum: 0 - - maximum: 0x7f + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0 + maximum: 0x7f cdns,phy-dll-delay-strobe: description: | Value of the delay introduced on the dat_strobe input used in HS400 / HS400_ES speed modes. - allOf: - - $ref: "/schemas/types.yaml#/definitions/uint32" - - minimum: 0 - - maximum: 0x7f + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0 + maximum: 0x7f required: - compatible diff --git a/Documentation/devicetree/bindings/mmc/mmc-controller.yaml b/Documentation/devicetree/bindings/mmc/mmc-controller.yaml index acc9f10871d4..4931fab34d81 100644 --- a/Documentation/devicetree/bindings/mmc/mmc-controller.yaml +++ b/Documentation/devicetree/bindings/mmc/mmc-controller.yaml @@ -76,20 +76,18 @@ properties: # Other properties bus-width: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [1, 4, 8] - default: 1 description: Number of data lines. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [1, 4, 8] + default: 1 max-frequency: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - minimum: 400000 - - maximum: 200000000 description: Maximum operating frequency of the bus. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 400000 + maximum: 200000000 disable-wp: $ref: /schemas/types.yaml#/definitions/flag @@ -212,13 +210,12 @@ properties: eMMC HS400 enhanced strobe mode is supported dsr: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - minimum: 0 - - maximum: 0xffff description: Value the card Driver Stage Register (DSR) should be programmed with. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 0xffff no-sdio: $ref: /schemas/types.yaml#/definitions/flag @@ -238,25 +235,23 @@ properties: initialization. fixed-emmc-driver-type: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - minimum: 0 - - maximum: 4 description: For non-removable eMMC, enforce this driver type. The value is the driver type as specified in the eMMC specification (table 206 in spec version 5.1) + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 4 post-power-on-delay-ms: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - default: 10 description: It was invented for MMC pwrseq-simple which could be referred to mmc-pwrseq-simple.txt. But now it\'s reused as a tunable delay waiting for I/O signalling and card power supply to be stable, regardless of whether pwrseq-simple is used. Default to 10ms if no available. + $ref: /schemas/types.yaml#/definitions/uint32 + default: 10 supports-cqe: $ref: /schemas/types.yaml#/definitions/flag @@ -333,8 +328,8 @@ patternProperties: - reg "^clk-phase-(legacy|sd-hs|mmc-(hs|hs[24]00|ddr52)|uhs-(sdr(12|25|50|104)|ddr50))$": - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 2 maxItems: 2 items: diff --git a/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml b/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml index 4ee3ed6efab4..42d44cbf962f 100644 --- a/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml +++ b/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml @@ -76,8 +76,7 @@ properties: high speed modes. rockchip,default-sample-phase: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 0 maximum: 360 default: 0 @@ -87,8 +86,7 @@ properties: If not specified 0 deg will be used. rockchip,desired-num-phases: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 0 maximum: 360 default: 360 diff --git a/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc-common.yaml b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc-common.yaml index 890d47a87ac5..85bd528e9a14 100644 --- a/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc-common.yaml +++ b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc-common.yaml @@ -27,39 +27,35 @@ properties: clock to this at probe time. fifo-depth: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 description: The maximum size of the tx/rx fifo's. If this property is not specified, the default value of the fifo size is determined from the controller registers. + $ref: /schemas/types.yaml#/definitions/uint32 card-detect-delay: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - default: 0 description: Delay in milli-seconds before detecting card after card insert event. The default value is 0. + $ref: /schemas/types.yaml#/definitions/uint32 + default: 0 data-addr: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 description: Override fifo address with value provided by DT. The default FIFO reg offset is assumed as 0x100 (version < 0x240A) and 0x200(version >= 0x240A) by driver. If the controller does not follow this rule, please use this property to set fifo address in device tree. + $ref: /schemas/types.yaml#/definitions/uint32 fifo-watermark-aligned: - allOf: - - $ref: /schemas/types.yaml#/definitions/flag description: Data done irq is expected if data length is less than watermark in PIO mode. But fifo watermark is requested to be aligned with data length in some SoC so that TX/RX irq can be generated with data done irq. Add this watermark quirk to mark this requirement and force fifo watermark setting accordingly. + $ref: /schemas/types.yaml#/definitions/flag dmas: maxItems: 1 diff --git a/Documentation/devicetree/bindings/mtd/allwinner,sun4i-a10-nand.yaml b/Documentation/devicetree/bindings/mtd/allwinner,sun4i-a10-nand.yaml index 5d3fa412aabd..c033ac3f147d 100644 --- a/Documentation/devicetree/bindings/mtd/allwinner,sun4i-a10-nand.yaml +++ b/Documentation/devicetree/bindings/mtd/allwinner,sun4i-a10-nand.yaml @@ -75,13 +75,12 @@ patternProperties: allwinner,rb: description: Contains the native Ready/Busy IDs. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array - - minItems: 1 - maxItems: 2 - items: - minimum: 0 - maximum: 1 + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 2 + items: + minimum: 0 + maximum: 1 additionalProperties: false diff --git a/Documentation/devicetree/bindings/mtd/nand-controller.yaml b/Documentation/devicetree/bindings/mtd/nand-controller.yaml index d261b7096c69..cde7c4d79efe 100644 --- a/Documentation/devicetree/bindings/mtd/nand-controller.yaml +++ b/Documentation/devicetree/bindings/mtd/nand-controller.yaml @@ -47,29 +47,26 @@ patternProperties: Contains the native Ready/Busy IDs. nand-ecc-mode: - allOf: - - $ref: /schemas/types.yaml#/definitions/string - - enum: [ none, soft, hw, hw_syndrome, hw_oob_first, on-die ] description: Desired ECC engine, either hardware (most of the time embedded in the NAND controller) or software correction (Linux will handle the calculations). soft_bch is deprecated and should be replaced by soft and nand-ecc-algo. + $ref: /schemas/types.yaml#/definitions/string + enum: [none, soft, hw, hw_syndrome, hw_oob_first, on-die] nand-ecc-algo: - allOf: - - $ref: /schemas/types.yaml#/definitions/string - - enum: [ hamming, bch, rs ] description: Desired ECC algorithm. + $ref: /schemas/types.yaml#/definitions/string + enum: [hamming, bch, rs] nand-bus-width: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [ 8, 16 ] - - default: 8 description: Bus width to the NAND chip + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [8, 16] + default: 8 nand-on-flash-bbt: $ref: /schemas/types.yaml#/definitions/flag @@ -83,18 +80,16 @@ patternProperties: build a volatile BBT in RAM. nand-ecc-strength: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - minimum: 1 description: Maximum number of bits that can be corrected per ECC step. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 nand-ecc-step-size: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - minimum: 1 description: Number of data bytes covered by a single ECC step. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 nand-ecc-maximize: $ref: /schemas/types.yaml#/definitions/flag diff --git a/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml b/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml index 7a784dc4e513..798fa5fb7bb2 100644 --- a/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml +++ b/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml @@ -76,36 +76,35 @@ properties: Please refer to 2.4.1 Message RAM Configuration in Bosch M_CAN user manual for details. - allOf: - - $ref: /schemas/types.yaml#/definitions/int32-array - - items: - items: - - description: The 'offset' is an address offset of the Message RAM - where the following elements start from. This is usually - set to 0x0 if you're using a private Message RAM. - default: 0 - - description: 11-bit Filter 0-128 elements / 0-128 words - minimum: 0 - maximum: 128 - - description: 29-bit Filter 0-64 elements / 0-128 words - minimum: 0 - maximum: 64 - - description: Rx FIFO 0 0-64 elements / 0-1152 words - minimum: 0 - maximum: 64 - - description: Rx FIFO 1 0-64 elements / 0-1152 words - minimum: 0 - maximum: 64 - - description: Rx Buffers 0-64 elements / 0-1152 words - minimum: 0 - maximum: 64 - - description: Tx Event FIFO 0-32 elements / 0-64 words - minimum: 0 - maximum: 32 - - description: Tx Buffers 0-32 elements / 0-576 words - minimum: 0 - maximum: 32 - maxItems: 1 + $ref: /schemas/types.yaml#/definitions/int32-array + items: + items: + - description: The 'offset' is an address offset of the Message RAM where + the following elements start from. This is usually set to 0x0 if + you're using a private Message RAM. + default: 0 + - description: 11-bit Filter 0-128 elements / 0-128 words + minimum: 0 + maximum: 128 + - description: 29-bit Filter 0-64 elements / 0-128 words + minimum: 0 + maximum: 64 + - description: Rx FIFO 0 0-64 elements / 0-1152 words + minimum: 0 + maximum: 64 + - description: Rx FIFO 1 0-64 elements / 0-1152 words + minimum: 0 + maximum: 64 + - description: Rx Buffers 0-64 elements / 0-1152 words + minimum: 0 + maximum: 64 + - description: Tx Event FIFO 0-32 elements / 0-64 words + minimum: 0 + maximum: 32 + - description: Tx Buffers 0-32 elements / 0-576 words + minimum: 0 + maximum: 32 + maxItems: 1 can-transceiver: $ref: can-transceiver.yaml# diff --git a/Documentation/devicetree/bindings/net/ethernet-controller.yaml b/Documentation/devicetree/bindings/net/ethernet-controller.yaml index ac471b60ed6a..1c4474036d46 100644 --- a/Documentation/devicetree/bindings/net/ethernet-controller.yaml +++ b/Documentation/devicetree/bindings/net/ethernet-controller.yaml @@ -14,25 +14,23 @@ properties: pattern: "^ethernet(@.*)?$" local-mac-address: - allOf: - - $ref: /schemas/types.yaml#definitions/uint8-array - - items: - - minItems: 6 - maxItems: 6 description: Specifies the MAC address that was assigned to the network device. + $ref: /schemas/types.yaml#definitions/uint8-array + items: + - minItems: 6 + maxItems: 6 mac-address: - allOf: - - $ref: /schemas/types.yaml#definitions/uint8-array - - items: - - minItems: 6 - maxItems: 6 description: Specifies the MAC address that was last used by the boot program; should be used in cases where the MAC address assigned to the device by the boot program is different from the local-mac-address property. + $ref: /schemas/types.yaml#definitions/uint8-array + items: + - minItems: 6 + maxItems: 6 max-frame-size: $ref: /schemas/types.yaml#definitions/uint32 @@ -133,15 +131,14 @@ properties: is used for components that can have configurable fifo sizes. managed: - allOf: - - $ref: /schemas/types.yaml#definitions/string - - default: auto - enum: - - auto - - in-band-status description: Specifies the PHY management type. If auto is set and fixed-link is not specified, it uses MDIO for management. + $ref: /schemas/types.yaml#definitions/string + default: auto + enum: + - auto + - in-band-status fixed-link: allOf: @@ -183,11 +180,10 @@ properties: then: properties: speed: - allOf: - - $ref: /schemas/types.yaml#definitions/uint32 - - enum: [10, 100, 1000] description: Link speed. + $ref: /schemas/types.yaml#definitions/uint32 + enum: [10, 100, 1000] full-duplex: $ref: /schemas/types.yaml#definitions/flag diff --git a/Documentation/devicetree/bindings/net/qca,ar803x.yaml b/Documentation/devicetree/bindings/net/qca,ar803x.yaml index 5a6c9d20c0ba..1788884b8c28 100644 --- a/Documentation/devicetree/bindings/net/qca,ar803x.yaml +++ b/Documentation/devicetree/bindings/net/qca,ar803x.yaml @@ -20,15 +20,13 @@ allOf: properties: qca,clk-out-frequency: description: Clock output frequency in Hertz. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [ 25000000, 50000000, 62500000, 125000000 ] + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [25000000, 50000000, 62500000, 125000000] qca,clk-out-strength: description: Clock output driver strength. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [ 0, 1, 2 ] + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2] qca,keep-pll-enabled: description: | @@ -52,17 +50,14 @@ properties: type: object description: Initial data for the VDDIO regulator. Set this to 1.5V or 1.8V. - allOf: - - $ref: /schemas/regulator/regulator.yaml + $ref: /schemas/regulator/regulator.yaml vddh-regulator: type: object description: Dummy subnode to model the external connection of the PHY VDDH regulator to VDDIO. - allOf: - - $ref: /schemas/regulator/regulator.yaml - + $ref: /schemas/regulator/regulator.yaml examples: - | diff --git a/Documentation/devicetree/bindings/net/qcom,ipa.yaml b/Documentation/devicetree/bindings/net/qcom,ipa.yaml index 140f15245654..1ef3087eb7b2 100644 --- a/Documentation/devicetree/bindings/net/qcom,ipa.yaml +++ b/Documentation/devicetree/bindings/net/qcom,ipa.yaml @@ -87,16 +87,14 @@ properties: - const: config qcom,smem-states: - allOf: - - $ref: /schemas/types.yaml#/definitions/phandle-array + $ref: /schemas/types.yaml#/definitions/phandle-array description: State bits used in by the AP to signal the modem. items: - description: Whether the "ipa-clock-enabled" state bit is valid - description: Whether the IPA clock is enabled (if valid) qcom,smem-state-names: - allOf: - - $ref: /schemas/types.yaml#/definitions/string-array + $ref: /schemas/types.yaml#/definitions/string-array description: The names of the state bits used for SMP2P output items: - const: ipa-clock-enabled-valid diff --git a/Documentation/devicetree/bindings/net/snps,dwmac.yaml b/Documentation/devicetree/bindings/net/snps,dwmac.yaml index 439115b7663c..30a1efd26626 100644 --- a/Documentation/devicetree/bindings/net/snps,dwmac.yaml +++ b/Documentation/devicetree/bindings/net/snps,dwmac.yaml @@ -204,14 +204,13 @@ properties: snps,reset-delays-us: deprecated: true - allOf: - - $ref: /schemas/types.yaml#definitions/uint32-array - - minItems: 3 - maxItems: 3 description: Triplet of delays. The 1st cell is reset pre-delay in micro seconds. The 2nd cell is reset pulse in micro seconds. The 3rd cell is reset post-delay in micro seconds. + $ref: /schemas/types.yaml#definitions/uint32-array + minItems: 3 + maxItems: 3 snps,aal: $ref: /schemas/types.yaml#definitions/flag @@ -306,27 +305,24 @@ allOf: then: properties: snps,pbl: - allOf: - - $ref: /schemas/types.yaml#definitions/uint32 - - enum: [2, 4, 8] description: Programmable Burst Length (tx and rx) + $ref: /schemas/types.yaml#definitions/uint32 + enum: [2, 4, 8] snps,txpbl: - allOf: - - $ref: /schemas/types.yaml#definitions/uint32 - - enum: [2, 4, 8] description: Tx Programmable Burst Length. If set, DMA tx will use this value rather than snps,pbl. + $ref: /schemas/types.yaml#definitions/uint32 + enum: [2, 4, 8] snps,rxpbl: - allOf: - - $ref: /schemas/types.yaml#definitions/uint32 - - enum: [2, 4, 8] description: Rx Programmable Burst Length. If set, DMA rx will use this value rather than snps,pbl. + $ref: /schemas/types.yaml#definitions/uint32 + enum: [2, 4, 8] snps,no-pbl-x8: $ref: /schemas/types.yaml#definitions/flag diff --git a/Documentation/devicetree/bindings/net/stm32-dwmac.yaml b/Documentation/devicetree/bindings/net/stm32-dwmac.yaml index 2207910ee79b..fafa34cebdb1 100644 --- a/Documentation/devicetree/bindings/net/stm32-dwmac.yaml +++ b/Documentation/devicetree/bindings/net/stm32-dwmac.yaml @@ -66,8 +66,7 @@ properties: - eth-ck st,syscon: - allOf: - - $ref: "/schemas/types.yaml#/definitions/phandle-array" + $ref: "/schemas/types.yaml#/definitions/phandle-array" description: Should be phandle/offset pair. The phandle to the syscon node which encompases the glue register, and the offset of the control register diff --git a/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml b/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml index 8fc8d3be303b..3ea0e1290dbb 100644 --- a/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml +++ b/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml @@ -105,8 +105,7 @@ properties: description: label associated with this port ti,dual-emac-pvid: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 1 maximum: 1024 description: @@ -150,10 +149,9 @@ properties: patternProperties: "^mdio@": type: object - allOf: - - $ref: "ti,davinci-mdio.yaml#" description: CPSW MDIO bus. + $ref: "ti,davinci-mdio.yaml#" required: diff --git a/Documentation/devicetree/bindings/net/ti,davinci-mdio.yaml b/Documentation/devicetree/bindings/net/ti,davinci-mdio.yaml index 2ea14ab29254..d454c1fab930 100644 --- a/Documentation/devicetree/bindings/net/ti,davinci-mdio.yaml +++ b/Documentation/devicetree/bindings/net/ti,davinci-mdio.yaml @@ -40,10 +40,9 @@ properties: ti,hwmods: description: TI hwmod name deprecated: true - allOf: - - $ref: /schemas/types.yaml#/definitions/string-array - - items: - const: davinci_mdio + $ref: /schemas/types.yaml#/definitions/string-array + items: + const: davinci_mdio if: properties: diff --git a/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml b/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml index 78bf511e2892..e3e9393c91b7 100644 --- a/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml +++ b/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml @@ -103,8 +103,7 @@ properties: type: object description: CPSW2G NUSS external ports - allOf: - - $ref: ethernet-controller.yaml# + $ref: ethernet-controller.yaml# properties: reg: @@ -139,8 +138,8 @@ properties: patternProperties: "^mdio@[0-9a-f]+$": type: object - allOf: - - $ref: "ti,davinci-mdio.yaml#" + $ref: "ti,davinci-mdio.yaml#" + description: CPSW MDIO bus. diff --git a/Documentation/devicetree/bindings/pci/cdns-pcie-host.yaml b/Documentation/devicetree/bindings/pci/cdns-pcie-host.yaml index ab6e43b636ec..cb4e700c0269 100644 --- a/Documentation/devicetree/bindings/pci/cdns-pcie-host.yaml +++ b/Documentation/devicetree/bindings/pci/cdns-pcie-host.yaml @@ -18,8 +18,7 @@ properties: description: Set into the no BAR match register to configure the number of least significant bits kept during inbound (PCIe -> AXI) address translations - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 0 maximum: 64 default: 32 diff --git a/Documentation/devicetree/bindings/pci/cdns-pcie.yaml b/Documentation/devicetree/bindings/pci/cdns-pcie.yaml index 6887ccc339cc..fd3978364da9 100644 --- a/Documentation/devicetree/bindings/pci/cdns-pcie.yaml +++ b/Documentation/devicetree/bindings/pci/cdns-pcie.yaml @@ -12,8 +12,7 @@ maintainers: properties: cdns,max-outbound-regions: description: maximum number of outbound regions - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 1 maximum: 32 default: 32 diff --git a/Documentation/devicetree/bindings/pci/intel-gw-pcie.yaml b/Documentation/devicetree/bindings/pci/intel-gw-pcie.yaml index 48a98dae00de..64b2c64ca806 100644 --- a/Documentation/devicetree/bindings/pci/intel-gw-pcie.yaml +++ b/Documentation/devicetree/bindings/pci/intel-gw-pcie.yaml @@ -71,10 +71,9 @@ properties: max-link-speed: description: Specify PCI Gen for link capability. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [ 1, 2, 3, 4 ] - - default: 1 + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [1, 2, 3, 4] + default: 1 bus-range: description: Range of bus numbers associated with this controller. diff --git a/Documentation/devicetree/bindings/pci/pci-ep.yaml b/Documentation/devicetree/bindings/pci/pci-ep.yaml index b3df100705b0..0f8e575ac01a 100644 --- a/Documentation/devicetree/bindings/pci/pci-ep.yaml +++ b/Documentation/devicetree/bindings/pci/pci-ep.yaml @@ -18,21 +18,18 @@ properties: max-functions: description: Maximum number of functions that can be configured - allOf: - - $ref: /schemas/types.yaml#/definitions/uint8 + $ref: /schemas/types.yaml#/definitions/uint8 minimum: 1 default: 1 maximum: 255 max-link-speed: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 enum: [ 1, 2, 3, 4 ] num-lanes: description: maximum number of lanes - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 1 default: 1 maximum: 16 diff --git a/Documentation/devicetree/bindings/phy/phy-cadence-torrent.yaml b/Documentation/devicetree/bindings/phy/phy-cadence-torrent.yaml index c779a3c7d87a..256dd149698b 100644 --- a/Documentation/devicetree/bindings/phy/phy-cadence-torrent.yaml +++ b/Documentation/devicetree/bindings/phy/phy-cadence-torrent.yaml @@ -77,24 +77,21 @@ patternProperties: description: Specifies the type of PHY for which the group of PHY lanes is used. Refer include/dt-bindings/phy/phy.h. Constants from the header should be used. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [1, 2, 3, 4, 5, 6] + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [1, 2, 3, 4, 5, 6] cdns,num-lanes: description: Number of DisplayPort lanes. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [1, 2, 4] + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [1, 2, 4] default: 4 cdns,max-bit-rate: description: Maximum DisplayPort link bit rate to use, in Mbps - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [2160, 2430, 2700, 3240, 4320, 5400, 8100] + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [2160, 2430, 2700, 3240, 4320, 5400, 8100] default: 8100 required: diff --git a/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml index f8bd28ff31c1..b5a6195de7ff 100644 --- a/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml +++ b/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml @@ -83,31 +83,28 @@ then: It is a 6 bit value that specifies offset to be added to PHY refgen RESCODE via IMP_CTRL1 register. It is a PHY tuning parameter that may vary for different boards of same SOC. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - minimum: 0 - maximum: 63 - default: 0 + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 63 + default: 0 qcom,bias-ctrl-value: description: It is a 6 bit value that specifies bias-ctrl-value. It is a PHY tuning parameter that may vary for different boards of same SOC. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - minimum: 0 - maximum: 63 - default: 32 + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 63 + default: 32 qcom,charge-ctrl-value: - description: + description: It is a 2 bit value that specifies charge-ctrl-value. It is a PHY tuning parameter that may vary for different boards of same SOC. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - minimum: 0 - maximum: 3 - default: 0 + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 3 + default: 0 qcom,hstx-trim-value: description: @@ -115,22 +112,20 @@ then: output current. Possible range is - 15mA to 24mA (stepsize of 600 uA). See dt-bindings/phy/phy-qcom-qusb2.h for applicable values. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - minimum: 0 - maximum: 15 - default: 3 + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 15 + default: 3 qcom,preemphasis-level: description: It is a 2 bit value that specifies pre-emphasis level. Possible range is 0 to 15% (stepsize of 5%). See dt-bindings/phy/phy-qcom-qusb2.h for applicable values. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - minimum: 0 - maximum: 3 - default: 0 + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 3 + default: 2 qcom,preemphasis-width: description: @@ -138,21 +133,19 @@ then: pre-emphasis (specified using qcom,preemphasis-level) must be in effect. Duration could be half-bit of full-bit. See dt-bindings/phy/phy-qcom-qusb2.h for applicable values. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - minimum: 0 - maximum: 1 - default: 0 + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 1 + default: 0 qcom,hsdisc-trim-value: description: It is a 2 bit value tuning parameter that control disconnect threshold and may vary for different boards of same SOC. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - minimum: 0 - maximum: 3 - default: 1 + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 3 + default: 0 required: - compatible diff --git a/Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml index bfefd09d8c1e..7556be6e2754 100644 --- a/Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml @@ -84,13 +84,12 @@ properties: gpio-line-names: true input-debounce: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array - - minItems: 1 - maxItems: 5 description: Debouncing periods in microseconds, one period per interrupt bank found in the controller + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 5 patternProperties: # It's pretty scary, but the basic idea is that: @@ -115,9 +114,8 @@ patternProperties: bias-pull-down: true drive-strength: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [ 10, 20, 30, 40 ] + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [10, 20, 30, 40] required: - pins diff --git a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml index 7651a675ab2d..017d9593573b 100644 --- a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml @@ -33,26 +33,23 @@ patternProperties: then: patternProperties: "^function|groups$": - allOf: - - $ref: "/schemas/types.yaml#/definitions/string" - - enum: [ ACPI, ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, - ADC15, ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, - DDCCLK, DDCDAT, EXTRST, FLACK, FLBUSY, FLWP, GPID, GPID0, GPID2, - GPID4, GPID6, GPIE0, GPIE2, GPIE4, GPIE6, I2C10, I2C11, I2C12, - I2C13, I2C14, I2C3, I2C4, I2C5, I2C6, I2C7, I2C8, I2C9, LPCPD, - LPCPME, LPCRST, LPCSMI, MAC1LINK, MAC2LINK, MDIO1, MDIO2, NCTS1, - NCTS2, NCTS3, NCTS4, NDCD1, NDCD2, NDCD3, NDCD4, NDSR1, NDSR2, - NDSR3, NDSR4, NDTR1, NDTR2, NDTR3, NDTR4, NDTS4, NRI1, NRI2, - NRI3, NRI4, NRTS1, NRTS2, NRTS3, OSCCLK, PWM0, PWM1, PWM2, PWM3, - PWM4, PWM5, PWM6, PWM7, RGMII1, RGMII2, RMII1, RMII2, ROM16, - ROM8, ROMCS1, ROMCS2, ROMCS3, ROMCS4, RXD1, RXD2, RXD3, RXD4, - SALT1, SALT2, SALT3, SALT4, SD1, SD2, SGPMCK, SGPMI, SGPMLD, - SGPMO, SGPSCK, SGPSI0, SGPSI1, SGPSLD, SIOONCTRL, SIOPBI, SIOPBO, - SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1DEBUG, - SPI1PASSTHRU, SPICS1, TIMER3, TIMER4, TIMER5, TIMER6, TIMER7, - TIMER8, TXD1, TXD2, TXD3, TXD4, UART6, USB11D1, USB11H2, USB2D1, - USB2H1, USBCKI, VGABIOS_ROM, VGAHS, VGAVS, VPI18, VPI24, VPI30, - VPO12, VPO24, WDTRST1, WDTRST2 ] + $ref: "/schemas/types.yaml#/definitions/string" + enum: [ACPI, ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, + ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, DDCCLK, DDCDAT, + EXTRST, FLACK, FLBUSY, FLWP, GPID, GPID0, GPID2, GPID4, GPID6, GPIE0, + GPIE2, GPIE4, GPIE6, I2C10, I2C11, I2C12, I2C13, I2C14, I2C3, I2C4, + I2C5, I2C6, I2C7, I2C8, I2C9, LPCPD, LPCPME, LPCRST, LPCSMI, MAC1LINK, + MAC2LINK, MDIO1, MDIO2, NCTS1, NCTS2, NCTS3, NCTS4, NDCD1, NDCD2, + NDCD3, NDCD4, NDSR1, NDSR2, NDSR3, NDSR4, NDTR1, NDTR2, NDTR3, NDTR4, + NDTS4, NRI1, NRI2, NRI3, NRI4, NRTS1, NRTS2, NRTS3, OSCCLK, PWM0, + PWM1, PWM2, PWM3, PWM4, PWM5, PWM6, PWM7, RGMII1, RGMII2, RMII1, + RMII2, ROM16, ROM8, ROMCS1, ROMCS2, ROMCS3, ROMCS4, RXD1, RXD2, RXD3, + RXD4, SALT1, SALT2, SALT3, SALT4, SD1, SD2, SGPMCK, SGPMI, SGPMLD, + SGPMO, SGPSCK, SGPSI0, SGPSI1, SGPSLD, SIOONCTRL, SIOPBI, SIOPBO, + SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1DEBUG, SPI1PASSTHRU, + SPICS1, TIMER3, TIMER4, TIMER5, TIMER6, TIMER7, TIMER8, TXD1, TXD2, + TXD3, TXD4, UART6, USB11D1, USB11H2, USB2D1, USB2H1, USBCKI, VGABIOS_ROM, + VGAHS, VGAVS, VPI18, VPI24, VPI30, VPO12, VPO24, WDTRST1, WDTRST2] required: - compatible diff --git a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml index 36feaf5e2dff..7fd73d6e3803 100644 --- a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml @@ -29,8 +29,7 @@ properties: aspeed,external-nodes: minItems: 2 maxItems: 2 - allOf: - - $ref: /schemas/types.yaml#/definitions/phandle-array + $ref: /schemas/types.yaml#/definitions/phandle-array description: | A cell of phandles to external controller nodes: 0: compatible with "aspeed,ast2500-gfx", "syscon" @@ -43,28 +42,25 @@ patternProperties: then: patternProperties: "^function|groups$": - allOf: - - $ref: "/schemas/types.yaml#/definitions/string" - - enum: [ ACPI, ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, - ADC15, ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, - DDCCLK, DDCDAT, ESPI, FWSPICS1, FWSPICS2, GPID0, GPID2, GPID4, - GPID6, GPIE0, GPIE2, GPIE4, GPIE6, I2C10, I2C11, I2C12, I2C13, - I2C14, I2C3, I2C4, I2C5, I2C6, I2C7, I2C8, I2C9, LAD0, LAD1, - LAD2, LAD3, LCLK, LFRAME, LPCHC, LPCPD, LPCPLUS, LPCPME, LPCRST, - LPCSMI, LSIRQ, MAC1LINK, MAC2LINK, MDIO1, MDIO2, NCTS1, NCTS2, - NCTS3, NCTS4, NDCD1, NDCD2, NDCD3, NDCD4, NDSR1, NDSR2, NDSR3, - NDSR4, NDTR1, NDTR2, NDTR3, NDTR4, NRI1, NRI2, NRI3, NRI4, NRTS1, - NRTS2, NRTS3, NRTS4, OSCCLK, PEWAKE, PNOR, PWM0, PWM1, PWM2, - PWM3, PWM4, PWM5, PWM6, PWM7, RGMII1, RGMII2, RMII1, RMII2, RXD1, - RXD2, RXD3, RXD4, SALT1, SALT10, SALT11, SALT12, SALT13, SALT14, - SALT2, SALT3, SALT4, SALT5, SALT6, SALT7, SALT8, SALT9, SCL1, - SCL2, SD1, SD2, SDA1, SDA2, SGPS1, SGPS2, SIOONCTRL, SIOPBI, - SIOPBO, SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1CS1, - SPI1DEBUG, SPI1PASSTHRU, SPI2CK, SPI2CS0, SPI2CS1, SPI2MISO, - SPI2MOSI, TIMER3, TIMER4, TIMER5, TIMER6, TIMER7, TIMER8, TXD1, - TXD2, TXD3, TXD4, UART6, USB11BHID, USB2AD, USB2AH, USB2BD, - USB2BH, USBCKI, VGABIOSROM, VGAHS, VGAVS, VPI24, VPO, WDTRST1, - WDTRST2, ] + $ref: "/schemas/types.yaml#/definitions/string" + enum: [ACPI, ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, + ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, DDCCLK, DDCDAT, + ESPI, FWSPICS1, FWSPICS2, GPID0, GPID2, GPID4, GPID6, GPIE0, GPIE2, + GPIE4, GPIE6, I2C10, I2C11, I2C12, I2C13, I2C14, I2C3, I2C4, I2C5, + I2C6, I2C7, I2C8, I2C9, LAD0, LAD1, LAD2, LAD3, LCLK, LFRAME, LPCHC, + LPCPD, LPCPLUS, LPCPME, LPCRST, LPCSMI, LSIRQ, MAC1LINK, MAC2LINK, + MDIO1, MDIO2, NCTS1, NCTS2, NCTS3, NCTS4, NDCD1, NDCD2, NDCD3, NDCD4, + NDSR1, NDSR2, NDSR3, NDSR4, NDTR1, NDTR2, NDTR3, NDTR4, NRI1, NRI2, + NRI3, NRI4, NRTS1, NRTS2, NRTS3, NRTS4, OSCCLK, PEWAKE, PNOR, PWM0, + PWM1, PWM2, PWM3, PWM4, PWM5, PWM6, PWM7, RGMII1, RGMII2, RMII1, + RMII2, RXD1, RXD2, RXD3, RXD4, SALT1, SALT10, SALT11, SALT12, SALT13, + SALT14, SALT2, SALT3, SALT4, SALT5, SALT6, SALT7, SALT8, SALT9, SCL1, + SCL2, SD1, SD2, SDA1, SDA2, SGPS1, SGPS2, SIOONCTRL, SIOPBI, SIOPBO, + SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1CS1, SPI1DEBUG, + SPI1PASSTHRU, SPI2CK, SPI2CS0, SPI2CS1, SPI2MISO, SPI2MOSI, TIMER3, + TIMER4, TIMER5, TIMER6, TIMER7, TIMER8, TXD1, TXD2, TXD3, TXD4, UART6, + USB11BHID, USB2AD, USB2AH, USB2BD, USB2BH, USBCKI, VGABIOSROM, VGAHS, + VGAVS, VPI24, VPO, WDTRST1, WDTRST2] required: - compatible diff --git a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml index 45af29bc3202..1506726c7fea 100644 --- a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml @@ -30,64 +30,58 @@ patternProperties: then: properties: function: - allOf: - - $ref: "/schemas/types.yaml#/definitions/string" - - enum: [ ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, - ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, EMMC, - ESPI, ESPIALT, FSI1, FSI2, FWSPIABR, FWSPID, FWSPIWP, GPIT0, - GPIT1, GPIT2, GPIT3, GPIT4, GPIT5, GPIT6, GPIT7, GPIU0, GPIU1, - GPIU2, GPIU3, GPIU4, GPIU5, GPIU6, GPIU7, I2C1, I2C10, I2C11, - I2C12, I2C13, I2C14, I2C15, I2C16, I2C2, I2C3, I2C4, I2C5, I2C6, - I2C7, I2C8, I2C9, I3C3, I3C4, I3C5, I3C6, JTAGM, LHPD, LHSIRQ, - LPC, LPCHC, LPCPD, LPCPME, LPCSMI, LSIRQ, MACLINK1, MACLINK2, - MACLINK3, MACLINK4, MDIO1, MDIO2, MDIO3, MDIO4, NCTS1, NCTS2, - NCTS3, NCTS4, NDCD1, NDCD2, NDCD3, NDCD4, NDSR1, NDSR2, NDSR3, - NDSR4, NDTR1, NDTR2, NDTR3, NDTR4, NRI1, NRI2, NRI3, NRI4, NRTS1, - NRTS2, NRTS3, NRTS4, OSCCLK, PEWAKE, PWM0, PWM1, PWM10, PWM11, - PWM12, PWM13, PWM14, PWM15, PWM2, PWM3, PWM4, PWM5, PWM6, PWM7, - PWM8, PWM9, RGMII1, RGMII2, RGMII3, RGMII4, RMII1, RMII2, RMII3, - RMII4, RXD1, RXD2, RXD3, RXD4, SALT1, SALT10, SALT11, SALT12, - SALT13, SALT14, SALT15, SALT16, SALT2, SALT3, SALT4, SALT5, - SALT6, SALT7, SALT8, SALT9, SD1, SD2, SGPM1, SGPS1, SIOONCTRL, - SIOPBI, SIOPBO, SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, - SPI1ABR, SPI1CS1, SPI1WP, SPI2, SPI2CS1, SPI2CS2, TACH0, TACH1, - TACH10, TACH11, TACH12, TACH13, TACH14, TACH15, TACH2, TACH3, - TACH4, TACH5, TACH6, TACH7, TACH8, TACH9, THRU0, THRU1, THRU2, - THRU3, TXD1, TXD2, TXD3, TXD4, UART10, UART11, UART12, UART13, - UART6, UART7, UART8, UART9, USBAD, USBADP, USB2AH, USB2AHP, - USB2BD, USB2BH, VB, VGAHS, VGAVS, WDTRST1, WDTRST2, WDTRST3, - WDTRST4, ] + $ref: "/schemas/types.yaml#/definitions/string" + enum: [ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, ADC2, + ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, EMMC, ESPI, ESPIALT, + FSI1, FSI2, FWSPIABR, FWSPID, FWSPIWP, GPIT0, GPIT1, GPIT2, GPIT3, + GPIT4, GPIT5, GPIT6, GPIT7, GPIU0, GPIU1, GPIU2, GPIU3, GPIU4, GPIU5, + GPIU6, GPIU7, I2C1, I2C10, I2C11, I2C12, I2C13, I2C14, I2C15, I2C16, + I2C2, I2C3, I2C4, I2C5, I2C6, I2C7, I2C8, I2C9, I3C3, I3C4, I3C5, + I3C6, JTAGM, LHPD, LHSIRQ, LPC, LPCHC, LPCPD, LPCPME, LPCSMI, LSIRQ, + MACLINK1, MACLINK2, MACLINK3, MACLINK4, MDIO1, MDIO2, MDIO3, MDIO4, + NCTS1, NCTS2, NCTS3, NCTS4, NDCD1, NDCD2, NDCD3, NDCD4, NDSR1, NDSR2, + NDSR3, NDSR4, NDTR1, NDTR2, NDTR3, NDTR4, NRI1, NRI2, NRI3, NRI4, + NRTS1, NRTS2, NRTS3, NRTS4, OSCCLK, PEWAKE, PWM0, PWM1, PWM10, PWM11, + PWM12, PWM13, PWM14, PWM15, PWM2, PWM3, PWM4, PWM5, PWM6, PWM7, PWM8, + PWM9, RGMII1, RGMII2, RGMII3, RGMII4, RMII1, RMII2, RMII3, RMII4, + RXD1, RXD2, RXD3, RXD4, SALT1, SALT10, SALT11, SALT12, SALT13, SALT14, + SALT15, SALT16, SALT2, SALT3, SALT4, SALT5, SALT6, SALT7, SALT8, + SALT9, SD1, SD2, SGPM1, SGPS1, SIOONCTRL, SIOPBI, SIOPBO, SIOPWREQ, + SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1ABR, SPI1CS1, SPI1WP, SPI2, + SPI2CS1, SPI2CS2, TACH0, TACH1, TACH10, TACH11, TACH12, TACH13, TACH14, + TACH15, TACH2, TACH3, TACH4, TACH5, TACH6, TACH7, TACH8, TACH9, THRU0, + THRU1, THRU2, THRU3, TXD1, TXD2, TXD3, TXD4, UART10, UART11, UART12, + UART13, UART6, UART7, UART8, UART9, USBAD, USBADP, USB2AH, USB2AHP, + USB2BD, USB2BH, VB, VGAHS, VGAVS, WDTRST1, WDTRST2, WDTRST3, WDTRST4] + groups: - allOf: - - $ref: "/schemas/types.yaml#/definitions/string" - - enum: [ ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, - ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, EMMCG1, - EMMCG4, EMMCG8, ESPI, ESPIALT, FSI1, FSI2, FWSPIABR, FWSPID, - FWQSPID, FWSPIWP, GPIT0, GPIT1, GPIT2, GPIT3, GPIT4, GPIT5, - GPIT6, GPIT7, GPIU0, GPIU1, GPIU2, GPIU3, GPIU4, GPIU5, GPIU6, - GPIU7, HVI3C3, HVI3C4, I2C1, I2C10, I2C11, I2C12, I2C13, I2C14, - I2C15, I2C16, I2C2, I2C3, I2C4, I2C5, I2C6, I2C7, I2C8, I2C9, - I3C3, I3C4, I3C5, I3C6, JTAGM, LHPD, LHSIRQ, LPC, LPCHC, LPCPD, - LPCPME, LPCSMI, LSIRQ, MACLINK1, MACLINK2, MACLINK3, MACLINK4, - MDIO1, MDIO2, MDIO3, MDIO4, NCTS1, NCTS2, NCTS3, NCTS4, NDCD1, - NDCD2, NDCD3, NDCD4, NDSR1, NDSR2, NDSR3, NDSR4, NDTR1, NDTR2, - NDTR3, NDTR4, NRI1, NRI2, NRI3, NRI4, NRTS1, NRTS2, NRTS3, NRTS4, - OSCCLK, PEWAKE, PWM0, PWM1, PWM10G0, PWM10G1, PWM11G0, PWM11G1, - PWM12G0, PWM12G1, PWM13G0, PWM13G1, PWM14G0, PWM14G1, PWM15G0, - PWM15G1, PWM2, PWM3, PWM4, PWM5, PWM6, PWM7, PWM8G0, PWM8G1, - PWM9G0, PWM9G1, QSPI1, QSPI2, RGMII1, RGMII2, RGMII3, RGMII4, - RMII1, RMII2, RMII3, RMII4, RXD1, RXD2, RXD3, RXD4, SALT1, - SALT10G0, SALT10G1, SALT11G0, SALT11G1, SALT12G0, SALT12G1, - SALT13G0, SALT13G1, SALT14G0, SALT14G1, SALT15G0, SALT15G1, - SALT16G0, SALT16G1, SALT2, SALT3, SALT4, SALT5, SALT6, SALT7, - SALT8, SALT9G0, SALT9G1, SD1, SD2, SD3, SGPM1, SGPS1, SIOONCTRL, - SIOPBI, SIOPBO, SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, - SPI1ABR, SPI1CS1, SPI1WP, SPI2, SPI2CS1, SPI2CS2, TACH0, TACH1, - TACH10, TACH11, TACH12, TACH13, TACH14, TACH15, TACH2, TACH3, - TACH4, TACH5, TACH6, TACH7, TACH8, TACH9, THRU0, THRU1, THRU2, - THRU3, TXD1, TXD2, TXD3, TXD4, UART10, UART11, UART12G0, - UART12G1, UART13G0, UART13G1, UART6, UART7, UART8, UART9, USBA, - USBB, VB, VGAHS, VGAVS, WDTRST1, WDTRST2, WDTRST3, WDTRST4, ] + $ref: "/schemas/types.yaml#/definitions/string" + enum: [ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, ADC2, + ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, EMMCG1, EMMCG4, + EMMCG8, ESPI, ESPIALT, FSI1, FSI2, FWSPIABR, FWSPID, FWQSPID, FWSPIWP, + GPIT0, GPIT1, GPIT2, GPIT3, GPIT4, GPIT5, GPIT6, GPIT7, GPIU0, GPIU1, + GPIU2, GPIU3, GPIU4, GPIU5, GPIU6, GPIU7, HVI3C3, HVI3C4, I2C1, I2C10, + I2C11, I2C12, I2C13, I2C14, I2C15, I2C16, I2C2, I2C3, I2C4, I2C5, + I2C6, I2C7, I2C8, I2C9, I3C3, I3C4, I3C5, I3C6, JTAGM, LHPD, LHSIRQ, + LPC, LPCHC, LPCPD, LPCPME, LPCSMI, LSIRQ, MACLINK1, MACLINK2, MACLINK3, + MACLINK4, MDIO1, MDIO2, MDIO3, MDIO4, NCTS1, NCTS2, NCTS3, NCTS4, + NDCD1, NDCD2, NDCD3, NDCD4, NDSR1, NDSR2, NDSR3, NDSR4, NDTR1, NDTR2, + NDTR3, NDTR4, NRI1, NRI2, NRI3, NRI4, NRTS1, NRTS2, NRTS3, NRTS4, + OSCCLK, PEWAKE, PWM0, PWM1, PWM10G0, PWM10G1, PWM11G0, PWM11G1, PWM12G0, + PWM12G1, PWM13G0, PWM13G1, PWM14G0, PWM14G1, PWM15G0, PWM15G1, PWM2, + PWM3, PWM4, PWM5, PWM6, PWM7, PWM8G0, PWM8G1, PWM9G0, PWM9G1, QSPI1, + QSPI2, RGMII1, RGMII2, RGMII3, RGMII4, RMII1, RMII2, RMII3, RMII4, + RXD1, RXD2, RXD3, RXD4, SALT1, SALT10G0, SALT10G1, SALT11G0, SALT11G1, + SALT12G0, SALT12G1, SALT13G0, SALT13G1, SALT14G0, SALT14G1, SALT15G0, + SALT15G1, SALT16G0, SALT16G1, SALT2, SALT3, SALT4, SALT5, SALT6, + SALT7, SALT8, SALT9G0, SALT9G1, SD1, SD2, SD3, SGPM1, SGPS1, SIOONCTRL, + SIOPBI, SIOPBO, SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1ABR, + SPI1CS1, SPI1WP, SPI2, SPI2CS1, SPI2CS2, TACH0, TACH1, TACH10, TACH11, + TACH12, TACH13, TACH14, TACH15, TACH2, TACH3, TACH4, TACH5, TACH6, + TACH7, TACH8, TACH9, THRU0, THRU1, THRU2, THRU3, TXD1, TXD2, TXD3, + TXD4, UART10, UART11, UART12G0, UART12G1, UART13G0, UART13G1, UART6, + UART7, UART8, UART9, USBA, USBB, VB, VGAHS, VGAVS, WDTRST1, WDTRST2, + WDTRST3, WDTRST4] required: - compatible diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx8mm-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/fsl,imx8mm-pinctrl.yaml index d98a3866add8..6d7d162e6171 100644 --- a/Documentation/devicetree/bindings/pinctrl/fsl,imx8mm-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx8mm-pinctrl.yaml @@ -37,22 +37,21 @@ patternProperties: be found in . The last integer CONFIG is the pad setting value like pull-up on this pin. Please refer to i.MX8M Mini Reference Manual for detailed CONFIG settings. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-matrix - - items: - items: - - description: | - "mux_reg" indicates the offset of mux register. - - description: | - "conf_reg" indicates the offset of pad configuration register. - - description: | - "input_reg" indicates the offset of select input register. - - description: | - "mux_val" indicates the mux value to be applied. - - description: | - "input_val" indicates the select input value to be applied. - - description: | - "pad_setting" indicates the pad configuration value to be applied. + $ref: /schemas/types.yaml#/definitions/uint32-matrix + items: + items: + - description: | + "mux_reg" indicates the offset of mux register. + - description: | + "conf_reg" indicates the offset of pad configuration register. + - description: | + "input_reg" indicates the offset of select input register. + - description: | + "mux_val" indicates the mux value to be applied. + - description: | + "input_val" indicates the select input value to be applied. + - description: | + "pad_setting" indicates the pad configuration value to be applied. required: - fsl,pins diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx8mn-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/fsl,imx8mn-pinctrl.yaml index b9aa180e07e4..7131cfd1fc45 100644 --- a/Documentation/devicetree/bindings/pinctrl/fsl,imx8mn-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx8mn-pinctrl.yaml @@ -37,22 +37,21 @@ patternProperties: be found in . The last integer CONFIG is the pad setting value like pull-up on this pin. Please refer to i.MX8M Nano Reference Manual for detailed CONFIG settings. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-matrix - - items: - items: - - description: | - "mux_reg" indicates the offset of mux register. - - description: | - "conf_reg" indicates the offset of pad configuration register. - - description: | - "input_reg" indicates the offset of select input register. - - description: | - "mux_val" indicates the mux value to be applied. - - description: | - "input_val" indicates the select input value to be applied. - - description: | - "pad_setting" indicates the pad configuration value to be applied. + $ref: /schemas/types.yaml#/definitions/uint32-matrix + items: + items: + - description: | + "mux_reg" indicates the offset of mux register. + - description: | + "conf_reg" indicates the offset of pad configuration register. + - description: | + "input_reg" indicates the offset of select input register. + - description: | + "mux_val" indicates the mux value to be applied. + - description: | + "input_val" indicates the select input value to be applied. + - description: | + "pad_setting" indicates the pad configuration value to be applied. required: - fsl,pins diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx8mp-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/fsl,imx8mp-pinctrl.yaml index 6297e78418cf..d474bc1f393b 100644 --- a/Documentation/devicetree/bindings/pinctrl/fsl,imx8mp-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx8mp-pinctrl.yaml @@ -37,22 +37,21 @@ patternProperties: be found in . The last integer CONFIG is the pad setting value like pull-up on this pin. Please refer to i.MX8M Plus Reference Manual for detailed CONFIG settings. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-matrix - - items: - items: - - description: | - "mux_reg" indicates the offset of mux register. - - description: | - "conf_reg" indicates the offset of pad configuration register. - - description: | - "input_reg" indicates the offset of select input register. - - description: | - "mux_val" indicates the mux value to be applied. - - description: | - "input_val" indicates the select input value to be applied. - - description: | - "pad_setting" indicates the pad configuration value to be applied. + $ref: /schemas/types.yaml#/definitions/uint32-matrix + items: + items: + - description: | + "mux_reg" indicates the offset of mux register. + - description: | + "conf_reg" indicates the offset of pad configuration register. + - description: | + "input_reg" indicates the offset of select input register. + - description: | + "mux_val" indicates the mux value to be applied. + - description: | + "input_val" indicates the select input value to be applied. + - description: | + "pad_setting" indicates the pad configuration value to be applied. required: - fsl,pins diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx8mq-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/fsl,imx8mq-pinctrl.yaml index b30c704fcfa1..0af2b6c95c17 100644 --- a/Documentation/devicetree/bindings/pinctrl/fsl,imx8mq-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx8mq-pinctrl.yaml @@ -37,22 +37,21 @@ patternProperties: be found in . The last integer CONFIG is the pad setting value like pull-up on this pin. Please refer to i.MX8M Quad Reference Manual for detailed CONFIG settings. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-matrix - - items: - items: - - description: | - "mux_reg" indicates the offset of mux register. - - description: | - "conf_reg" indicates the offset of pad configuration register. - - description: | - "input_reg" indicates the offset of select input register. - - description: | - "mux_val" indicates the mux value to be applied. - - description: | - "input_val" indicates the select input value to be applied. - - description: | - "pad_setting" indicates the pad configuration value to be applied. + $ref: /schemas/types.yaml#/definitions/uint32-matrix + items: + items: + - description: | + "mux_reg" indicates the offset of mux register. + - description: | + "conf_reg" indicates the offset of pad configuration register. + - description: | + "input_reg" indicates the offset of select input register. + - description: | + "mux_val" indicates the mux value to be applied. + - description: | + "input_val" indicates the select input value to be applied. + - description: | + "pad_setting" indicates the pad configuration value to be applied. required: - fsl,pins diff --git a/Documentation/devicetree/bindings/pinctrl/intel,lgm-io.yaml b/Documentation/devicetree/bindings/pinctrl/intel,lgm-io.yaml index cd2b436350ef..2c0acb405e6c 100644 --- a/Documentation/devicetree/bindings/pinctrl/intel,lgm-io.yaml +++ b/Documentation/devicetree/bindings/pinctrl/intel,lgm-io.yaml @@ -24,12 +24,10 @@ properties: patternProperties: '-pins$': type: object - allOf: - - $ref: pincfg-node.yaml# - - $ref: pinmux-node.yaml# description: Pinctrl node's client devices use subnodes for desired pin configuration. Client device subnodes use below standard properties. + $ref: pinmux-node.yaml# properties: function: true diff --git a/Documentation/devicetree/bindings/pinctrl/pinmux-node.yaml b/Documentation/devicetree/bindings/pinctrl/pinmux-node.yaml index 732d9075560b..ef8877ddb1eb 100644 --- a/Documentation/devicetree/bindings/pinctrl/pinmux-node.yaml +++ b/Documentation/devicetree/bindings/pinctrl/pinmux-node.yaml @@ -122,11 +122,10 @@ properties: this, "pins" or "pinmux" has to be specified) pinmux: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array description: The list of numeric pin ids and their mux settings that properties in the node apply to (either this, "pins" or "groups" have to be specified) + $ref: /schemas/types.yaml#/definitions/uint32-array pinctrl-pin-array: $ref: /schemas/types.yaml#/definitions/uint32-array diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml index 63d1cfe86c6e..b2de3992d484 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml @@ -49,8 +49,7 @@ patternProperties: description: Pinctrl node's client devices use subnodes for desired pin configuration. Client device subnodes use below standard properties. - allOf: - - $ref: "/schemas/pinctrl/pincfg-node.yaml" + $ref: "/schemas/pinctrl/pincfg-node.yaml" properties: pins: diff --git a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml index 46a0478cb924..1f6e51891ddc 100644 --- a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml @@ -37,21 +37,18 @@ properties: hwlocks: true st,syscfg: - allOf: - - $ref: "/schemas/types.yaml#/definitions/phandle-array" description: Should be phandle/offset/mask - Phandle to the syscon node which includes IRQ mux selection. - The offset of the IRQ mux selection register. - The field mask of IRQ mux, needed if different of 0xf. + $ref: "/schemas/types.yaml#/definitions/phandle-array" st,package: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [1, 2, 4, 8] description: Indicates the SOC package used. More details in include/dt-bindings/pinctrl/stm32-pinfunc.h - + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [1, 2, 4, 8] patternProperties: '^gpio@[0-9a-f]*$': @@ -78,33 +75,30 @@ patternProperties: maximum: 16 st,bank-name: - allOf: - - $ref: "/schemas/types.yaml#/definitions/string" - - enum: - - GPIOA - - GPIOB - - GPIOC - - GPIOD - - GPIOE - - GPIOF - - GPIOG - - GPIOH - - GPIOI - - GPIOJ - - GPIOK - - GPIOZ description: Should be a name string for this bank as specified in the datasheet. + $ref: "/schemas/types.yaml#/definitions/string" + enum: + - GPIOA + - GPIOB + - GPIOC + - GPIOD + - GPIOE + - GPIOF + - GPIOG + - GPIOH + - GPIOI + - GPIOJ + - GPIOK + - GPIOZ st,bank-ioport: - allOf: - - $ref: "/schemas/types.yaml#/definitions/uint32" - - minimum: 0 - - maximum: 11 - description: Should correspond to the EXTI IOport selection (EXTI line used to select GPIOs as interrupts). + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0 + maximum: 11 required: - gpio-controller @@ -125,8 +119,7 @@ patternProperties: configuration, pullups, drive, output high/low and output speed. properties: pinmux: - allOf: - - $ref: "/schemas/types.yaml#/definitions/uint32-array" + $ref: "/schemas/types.yaml#/definitions/uint32-array" description: | Integer array, represents gpio pin number and mux setting. Supported pin number and mux varies for different SoCs, and are @@ -180,9 +173,8 @@ patternProperties: 1: Medium speed 2: Fast speed 3: High speed - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [0, 1, 2, 3] + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] required: - pinmux diff --git a/Documentation/devicetree/bindings/power/amlogic,meson-ee-pwrc.yaml b/Documentation/devicetree/bindings/power/amlogic,meson-ee-pwrc.yaml index 6c6079fe1351..49fd3feabba5 100644 --- a/Documentation/devicetree/bindings/power/amlogic,meson-ee-pwrc.yaml +++ b/Documentation/devicetree/bindings/power/amlogic,meson-ee-pwrc.yaml @@ -56,8 +56,7 @@ properties: amlogic,ao-sysctrl: description: phandle to the AO sysctrl node - allOf: - - $ref: /schemas/types.yaml#/definitions/phandle + $ref: /schemas/types.yaml#/definitions/phandle required: - compatible diff --git a/Documentation/devicetree/bindings/pwm/pwm-samsung.yaml b/Documentation/devicetree/bindings/pwm/pwm-samsung.yaml index 4fe64f4dd594..fc799b0577d4 100644 --- a/Documentation/devicetree/bindings/pwm/pwm-samsung.yaml +++ b/Documentation/devicetree/bindings/pwm/pwm-samsung.yaml @@ -78,12 +78,11 @@ properties: A list of PWM channels used as PWM outputs on particular platform. It is an array of up to 5 elements being indices of PWM channels (from 0 to 4), the order does not matter. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array - - uniqueItems: true - - items: - minimum: 0 - maximum: 4 + $ref: /schemas/types.yaml#/definitions/uint32-array + uniqueItems: true + items: + minimum: 0 + maximum: 4 required: - clocks diff --git a/Documentation/devicetree/bindings/regulator/gpio-regulator.yaml b/Documentation/devicetree/bindings/regulator/gpio-regulator.yaml index 9d3b28417fb6..605590384b48 100644 --- a/Documentation/devicetree/bindings/regulator/gpio-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/gpio-regulator.yaml @@ -46,24 +46,22 @@ properties: 0: LOW 1: HIGH Default is LOW if nothing else is specified. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array - - maxItems: 8 - items: - enum: [ 0, 1 ] - default: 0 + $ref: /schemas/types.yaml#/definitions/uint32-array + maxItems: 8 + items: + enum: [0, 1] + default: 0 states: description: Selection of available voltages/currents provided by this regulator and matching GPIO configurations to achieve them. If there are no states in the "states" array, use a fixed regulator instead. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-matrix - - maxItems: 8 - items: - items: - - description: Voltage in microvolts - - description: GPIO group state value + $ref: /schemas/types.yaml#/definitions/uint32-matrix + maxItems: 8 + items: + items: + - description: Voltage in microvolts + - description: GPIO group state value startup-delay-us: description: startup time in microseconds @@ -81,12 +79,11 @@ properties: regulator-type: description: Specifies what is being regulated. - allOf: - - $ref: /schemas/types.yaml#/definitions/string - - enum: - - voltage - - current - default: voltage + $ref: /schemas/types.yaml#/definitions/string + enum: + - voltage + - current + default: voltage required: - compatible diff --git a/Documentation/devicetree/bindings/regulator/mps,mp5416.yaml b/Documentation/devicetree/bindings/regulator/mps,mp5416.yaml index 3b019fa6db31..90727fdc1283 100644 --- a/Documentation/devicetree/bindings/regulator/mps,mp5416.yaml +++ b/Documentation/devicetree/bindings/regulator/mps,mp5416.yaml @@ -27,13 +27,11 @@ properties: patternProperties: "^buck[1-4]$": - allOf: - - $ref: "regulator.yaml#" + $ref: "regulator.yaml#" type: object "^ldo[1-4]$": - allOf: - - $ref: "regulator.yaml#" + $ref: "regulator.yaml#" type: object additionalProperties: false diff --git a/Documentation/devicetree/bindings/regulator/mps,mpq7920.yaml b/Documentation/devicetree/bindings/regulator/mps,mpq7920.yaml index ae6e7ab36c58..12b8963615c3 100644 --- a/Documentation/devicetree/bindings/regulator/mps,mpq7920.yaml +++ b/Documentation/devicetree/bindings/regulator/mps,mpq7920.yaml @@ -21,17 +21,16 @@ properties: regulators: type: object - allOf: - - $ref: regulator.yaml# + $ref: regulator.yaml# + description: | list of regulators provided by this controller, must be named after their hardware counterparts BUCK[1-4], one LDORTC, and LDO[2-5] properties: mps,switch-freq: - allOf: - - $ref: "/schemas/types.yaml#/definitions/uint8" - enum: [ 0, 1, 2, 3 ] + $ref: "/schemas/types.yaml#/definitions/uint8" + enum: [0, 1, 2, 3] default: 2 description: | switching frequency must be one of following corresponding value @@ -40,32 +39,27 @@ properties: patternProperties: "^ldo[1-4]$": type: object - allOf: - - $ref: regulator.yaml# + $ref: regulator.yaml# "^ldortc$": type: object - allOf: - - $ref: regulator.yaml# + $ref: regulator.yaml# "^buck[1-4]$": type: object - allOf: - - $ref: regulator.yaml# + $ref: regulator.yaml# properties: mps,buck-softstart: - allOf: - - $ref: "/schemas/types.yaml#/definitions/uint8" - enum: [ 0, 1, 2, 3 ] + $ref: "/schemas/types.yaml#/definitions/uint8" + enum: [0, 1, 2, 3] description: | defines the soft start time of this buck, must be one of the following corresponding values 150us, 300us, 610us, 920us mps,buck-phase-delay: - allOf: - - $ref: "/schemas/types.yaml#/definitions/uint8" - enum: [ 0, 1, 2, 3 ] + $ref: "/schemas/types.yaml#/definitions/uint8" + enum: [0, 1, 2, 3] description: | defines the phase delay of this buck, must be one of the following corresponding values 0deg, 90deg, 180deg, 270deg diff --git a/Documentation/devicetree/bindings/regulator/regulator.yaml b/Documentation/devicetree/bindings/regulator/regulator.yaml index 91a39a33000b..ec505dbbf87c 100644 --- a/Documentation/devicetree/bindings/regulator/regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/regulator.yaml @@ -123,9 +123,8 @@ properties: 0: Disable active discharge. 1: Enable active discharge. Absence of this property will leave configuration to default. - allOf: - - $ref: "/schemas/types.yaml#/definitions/uint32" - - enum: [ 0, 1 ] + $ref: "/schemas/types.yaml#/definitions/uint32" + enum: [0, 1] regulator-coupled-with: description: Regulators with which the regulator is coupled. The linkage diff --git a/Documentation/devicetree/bindings/regulator/rohm,bd71828-regulator.yaml b/Documentation/devicetree/bindings/regulator/rohm,bd71828-regulator.yaml index 1e52dafcb5c9..5ce587fff961 100644 --- a/Documentation/devicetree/bindings/regulator/rohm,bd71828-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/rohm,bd71828-regulator.yaml @@ -24,10 +24,9 @@ description: | patternProperties: "^LDO[1-7]$": type: object - allOf: - - $ref: regulator.yaml# description: Properties for single LDO regulator. + $ref: regulator.yaml# properties: regulator-name: @@ -39,10 +38,9 @@ patternProperties: "^BUCK[1-7]$": type: object - allOf: - - $ref: regulator.yaml# description: Properties for single BUCK regulator. + $ref: regulator.yaml# properties: regulator-name: @@ -51,40 +49,36 @@ patternProperties: should be "buck1", ..., "buck7" rohm,dvs-run-voltage: - allOf: - - $ref: "/schemas/types.yaml#/definitions/uint32" - - minimum: 0 - maximum: 3300000 description: PMIC default "RUN" state voltage in uV. See below table for bucks which support this. 0 means disabled. + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0 + maximum: 3300000 rohm,dvs-idle-voltage: - allOf: - - $ref: "/schemas/types.yaml#/definitions/uint32" - - minimum: 0 - maximum: 3300000 description: PMIC default "IDLE" state voltage in uV. See below table for bucks which support this. 0 means disabled. + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0 + maximum: 3300000 rohm,dvs-suspend-voltage: - allOf: - - $ref: "/schemas/types.yaml#/definitions/uint32" - - minimum: 0 - maximum: 3300000 description: PMIC default "SUSPEND" state voltage in uV. See below table for bucks which support this. 0 means disabled. + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0 + maximum: 3300000 rohm,dvs-lpsr-voltage: - allOf: - - $ref: "/schemas/types.yaml#/definitions/uint32" - - minimum: 0 - maximum: 3300000 description: PMIC default "LPSR" state voltage in uV. See below table for bucks which support this. 0 means disabled. + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0 + maximum: 3300000 # Supported default DVS states: # buck | run | idle | suspend | lpsr diff --git a/Documentation/devicetree/bindings/regulator/rohm,bd71837-regulator.yaml b/Documentation/devicetree/bindings/regulator/rohm,bd71837-regulator.yaml index 543d4b52397e..19d9408d9c3b 100644 --- a/Documentation/devicetree/bindings/regulator/rohm,bd71837-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/rohm,bd71837-regulator.yaml @@ -30,8 +30,7 @@ description: | patternProperties: "^LDO[1-7]$": type: object - allOf: - - $ref: regulator.yaml# + $ref: regulator.yaml# description: Properties for single LDO regulator. @@ -45,8 +44,7 @@ patternProperties: "^BUCK[1-8]$": type: object - allOf: - - $ref: regulator.yaml# + $ref: regulator.yaml# description: Properties for single BUCK regulator. @@ -57,28 +55,25 @@ patternProperties: should be "buck1", ..., "buck8" rohm,dvs-run-voltage: - allOf: - - $ref: "/schemas/types.yaml#/definitions/uint32" - - minimum: 0 - maximum: 1300000 + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0 + maximum: 1300000 description: PMIC default "RUN" state voltage in uV. See below table for bucks which support this. 0 means disabled. rohm,dvs-idle-voltage: - allOf: - - $ref: "/schemas/types.yaml#/definitions/uint32" - - minimum: 0 - maximum: 1300000 + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0 + maximum: 1300000 description: PMIC default "IDLE" state voltage in uV. See below table for bucks which support this. 0 means disabled. rohm,dvs-suspend-voltage: - allOf: - - $ref: "/schemas/types.yaml#/definitions/uint32" - - minimum: 0 - maximum: 1300000 + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0 + maximum: 1300000 description: PMIC default "SUSPEND" state voltage in uV. See below table for bucks which support this. 0 means disabled. diff --git a/Documentation/devicetree/bindings/regulator/st,stm32-booster.yaml b/Documentation/devicetree/bindings/regulator/st,stm32-booster.yaml index 64f1183ce841..cb336b2c16af 100644 --- a/Documentation/devicetree/bindings/regulator/st,stm32-booster.yaml +++ b/Documentation/devicetree/bindings/regulator/st,stm32-booster.yaml @@ -23,8 +23,7 @@ properties: - st,stm32mp1-booster st,syscfg: - allOf: - - $ref: "/schemas/types.yaml#/definitions/phandle-array" + $ref: "/schemas/types.yaml#/definitions/phandle-array" description: phandle to system configuration controller. vdda-supply: diff --git a/Documentation/devicetree/bindings/regulator/st,stm32mp1-pwr-reg.yaml b/Documentation/devicetree/bindings/regulator/st,stm32mp1-pwr-reg.yaml index 8d8f38fe85dc..e6322bc3e447 100644 --- a/Documentation/devicetree/bindings/regulator/st,stm32mp1-pwr-reg.yaml +++ b/Documentation/devicetree/bindings/regulator/st,stm32mp1-pwr-reg.yaml @@ -26,8 +26,7 @@ patternProperties: "^(reg11|reg18|usb33)$": type: object - allOf: - - $ref: "regulator.yaml#" + $ref: "regulator.yaml#" required: - compatible diff --git a/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml b/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml index 4ff4d3df0a06..4ffa25268fcc 100644 --- a/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml +++ b/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml @@ -28,22 +28,20 @@ properties: maxItems: 1 st,syscfg-holdboot: - allOf: - - $ref: "/schemas/types.yaml#/definitions/phandle-array" description: remote processor reset hold boot - Phandle of syscon block. - The offset of the hold boot setting register. - The field mask of the hold boot. + $ref: "/schemas/types.yaml#/definitions/phandle-array" maxItems: 1 st,syscfg-tz: - allOf: - - $ref: "/schemas/types.yaml#/definitions/phandle-array" description: Reference to the system configuration which holds the RCC trust zone mode - Phandle of syscon block. - The offset of the RCC trust zone mode register. - The field mask of the RCC trust zone mode. + $ref: "/schemas/types.yaml#/definitions/phandle-array" maxItems: 1 interrupts: @@ -90,8 +88,7 @@ properties: (see ../reserved-memory/reserved-memory.txt) st,syscfg-pdds: - allOf: - - $ref: "/schemas/types.yaml#/definitions/phandle-array" + $ref: "/schemas/types.yaml#/definitions/phandle-array" description: | Reference to the system configuration which holds the remote 1st cell: phandle to syscon block diff --git a/Documentation/devicetree/bindings/reset/intel,rcu-gw.yaml b/Documentation/devicetree/bindings/reset/intel,rcu-gw.yaml index 8ac437282659..6b2d56cc3f38 100644 --- a/Documentation/devicetree/bindings/reset/intel,rcu-gw.yaml +++ b/Documentation/devicetree/bindings/reset/intel,rcu-gw.yaml @@ -21,8 +21,7 @@ properties: intel,global-reset: description: Global reset register offset and bit offset. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array + $ref: /schemas/types.yaml#/definitions/uint32-array items: - description: Register offset - description: Register bit offset diff --git a/Documentation/devicetree/bindings/riscv/cpus.yaml b/Documentation/devicetree/bindings/riscv/cpus.yaml index 04819ad379c2..f80ba2c66f71 100644 --- a/Documentation/devicetree/bindings/riscv/cpus.yaml +++ b/Documentation/devicetree/bindings/riscv/cpus.yaml @@ -40,24 +40,18 @@ properties: and identifies the type of the hart. mmu-type: - allOf: - - $ref: "/schemas/types.yaml#/definitions/string" - - enum: - - riscv,sv32 - - riscv,sv39 - - riscv,sv48 description: Identifies the MMU address translation mode used on this hart. These values originate from the RISC-V Privileged Specification document, available from https://riscv.org/specifications/ + $ref: "/schemas/types.yaml#/definitions/string" + enum: + - riscv,sv32 + - riscv,sv39 + - riscv,sv48 riscv,isa: - allOf: - - $ref: "/schemas/types.yaml#/definitions/string" - - enum: - - rv64imac - - rv64imafdc description: Identifies the specific RISC-V instruction set architecture supported by the hart. These are documented in the RISC-V @@ -67,6 +61,10 @@ properties: While the isa strings in ISA specification are case insensitive, letters in the riscv,isa string must be all lowercase to simplify parsing. + $ref: "/schemas/types.yaml#/definitions/string" + enum: + - rv64imac + - rv64imafdc # RISC-V requires 'timebase-frequency' in /cpus, so disallow it here timebase-frequency: false diff --git a/Documentation/devicetree/bindings/rtc/st,stm32-rtc.yaml b/Documentation/devicetree/bindings/rtc/st,stm32-rtc.yaml index 57b087574aa1..5456604b1c14 100644 --- a/Documentation/devicetree/bindings/rtc/st,stm32-rtc.yaml +++ b/Documentation/devicetree/bindings/rtc/st,stm32-rtc.yaml @@ -32,11 +32,10 @@ properties: maxItems: 1 st,syscfg: - allOf: - - $ref: "/schemas/types.yaml#/definitions/phandle-array" - - items: - minItems: 3 - maxItems: 3 + $ref: "/schemas/types.yaml#/definitions/phandle-array" + items: + minItems: 3 + maxItems: 3 description: | Phandle/offset/mask triplet. The phandle to pwrcfg used to access control register at offset, and change the dbp (Disable Backup diff --git a/Documentation/devicetree/bindings/serial/pl011.yaml b/Documentation/devicetree/bindings/serial/pl011.yaml index 1a64d59152aa..c23c93b400f0 100644 --- a/Documentation/devicetree/bindings/serial/pl011.yaml +++ b/Documentation/devicetree/bindings/serial/pl011.yaml @@ -88,17 +88,15 @@ properties: description: Rate at which poll occurs when auto-poll is set. default 100ms. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - default: 100 + $ref: /schemas/types.yaml#/definitions/uint32 + default: 100 poll-timeout-ms: description: Poll timeout when auto-poll is set, default 3000ms. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - default: 3000 + $ref: /schemas/types.yaml#/definitions/uint32 + default: 3000 required: - compatible diff --git a/Documentation/devicetree/bindings/serial/rs485.yaml b/Documentation/devicetree/bindings/serial/rs485.yaml index 2b8261ea6d9c..8141e4aad530 100644 --- a/Documentation/devicetree/bindings/serial/rs485.yaml +++ b/Documentation/devicetree/bindings/serial/rs485.yaml @@ -16,20 +16,18 @@ maintainers: properties: rs485-rts-delay: description: prop-encoded-array - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array - - items: - items: - - description: - Delay between rts signal and beginning of data sent in milliseconds. - It corresponds to the delay before sending data. - default: 0 - maximum: 1000 - - description: - Delay between end of data sent and rts signal in milliseconds. - It corresponds to the delay after sending data and actual release of the line. - default: 0 - maximum: 1000 + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + items: + - description: Delay between rts signal and beginning of data sent in + milliseconds. It corresponds to the delay before sending data. + default: 0 + maximum: 1000 + - description: Delay between end of data sent and rts signal in milliseconds. + It corresponds to the delay after sending data and actual release + of the line. + default: 0 + maximum: 1000 rs485-rts-active-low: description: drive RTS low when sending (default is high). diff --git a/Documentation/devicetree/bindings/serial/samsung_uart.yaml b/Documentation/devicetree/bindings/serial/samsung_uart.yaml index 9d2ce347875b..ff2f49fe322c 100644 --- a/Documentation/devicetree/bindings/serial/samsung_uart.yaml +++ b/Documentation/devicetree/bindings/serial/samsung_uart.yaml @@ -51,9 +51,8 @@ properties: samsung,uart-fifosize: description: The fifo size supported by the UART channel. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [16, 64, 256] + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [16, 64, 256] required: - compatible diff --git a/Documentation/devicetree/bindings/sound/adi,adau7118.yaml b/Documentation/devicetree/bindings/sound/adi,adau7118.yaml index 76ee695097bf..fb78967ee17b 100644 --- a/Documentation/devicetree/bindings/sound/adi,adau7118.yaml +++ b/Documentation/devicetree/bindings/sound/adi,adau7118.yaml @@ -35,23 +35,21 @@ properties: adi,decimation-ratio: description: | This property set's the decimation ratio of PDM to PCM audio data. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [64, 32, 16] - default: 64 + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [64, 32, 16] + default: 64 adi,pdm-clk-map: description: | The ADAU7118 has two PDM clocks for the four Inputs. Each input must be assigned to one of these two clocks. This property set's the mapping between the clocks and the inputs. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array - - minItems: 4 - maxItems: 4 - items: - maximum: 1 - default: [0, 0, 1, 1] + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 4 + maxItems: 4 + items: + maximum: 1 + default: [0, 0, 1, 1] required: - "#sound-dai-cells" diff --git a/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-codec.yaml b/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-codec.yaml index ea1d2efb2aaa..be390accdd07 100644 --- a/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-codec.yaml +++ b/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-codec.yaml @@ -57,32 +57,31 @@ properties: A list of the connections between audio components. Each entry is a pair of strings, the first being the connection's sink, the second being the connection's source. - allOf: - - $ref: /schemas/types.yaml#definitions/non-unique-string-array - - minItems: 2 - maxItems: 18 - items: - enum: - # Audio Pins on the SoC - - HP - - HPCOM - - LINEIN - - LINEOUT - - MIC1 - - MIC2 - - MIC3 - - # Microphone Biases from the SoC - - HBIAS - - MBIAS - - # Board Connectors - - Headphone - - Headset Mic - - Line In - - Line Out - - Mic - - Speaker + $ref: /schemas/types.yaml#definitions/non-unique-string-array + minItems: 2 + maxItems: 18 + items: + enum: + # Audio Pins on the SoC + - HP + - HPCOM + - LINEIN + - LINEOUT + - MIC1 + - MIC2 + - MIC3 + + # Microphone Biases from the SoC + - HBIAS + - MBIAS + + # Board Connectors + - Headphone + - Headset Mic + - Line In + - Line Out + - Mic + - Speaker allwinner,codec-analog-controls: $ref: /schemas/types.yaml#/definitions/phandle diff --git a/Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml b/Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml index a495d5fc0d23..e8f716b5f875 100644 --- a/Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml +++ b/Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml @@ -102,8 +102,7 @@ properties: gpio@42: type: object - allOf: - - $ref: ../gpio/qcom,wcd934x-gpio.yaml# + $ref: ../gpio/qcom,wcd934x-gpio.yaml# patternProperties: "^.*@[0-9a-f]+$": diff --git a/Documentation/devicetree/bindings/sound/rockchip-i2s.yaml b/Documentation/devicetree/bindings/sound/rockchip-i2s.yaml index 7cd0e278ed85..886efabdcec3 100644 --- a/Documentation/devicetree/bindings/sound/rockchip-i2s.yaml +++ b/Documentation/devicetree/bindings/sound/rockchip-i2s.yaml @@ -57,15 +57,13 @@ properties: - const: rx rockchip,capture-channels: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 default: 2 description: Max capture channels, if not set, 2 channels default. rockchip,playback-channels: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 default: 8 description: Max playback channels, if not set, 8 channels default. diff --git a/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml b/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml index ab2268c0ee67..d14e1a944a98 100644 --- a/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml +++ b/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml @@ -49,9 +49,8 @@ properties: 0 - Mic bias is set to VREF 1 - Mic bias is set to VREF × 1.096 6 - Mic bias is set to AVDD - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [0, 1, 6] + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 6] ti,vref-source: description: | @@ -59,9 +58,8 @@ properties: 0 - Set VREF to 2.75V 1 - Set VREF to 2.5V 2 - Set VREF to 1.375V - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [0, 1, 2] + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2] required: - compatible diff --git a/Documentation/devicetree/bindings/spi/renesas,sh-msiof.yaml b/Documentation/devicetree/bindings/spi/renesas,sh-msiof.yaml index b6c1dd2a9c5e..c8f0985a8738 100644 --- a/Documentation/devicetree/bindings/spi/renesas,sh-msiof.yaml +++ b/Documentation/devicetree/bindings/spi/renesas,sh-msiof.yaml @@ -96,43 +96,39 @@ properties: renesas,dtdl: description: delay sync signal (setup) in transmit mode. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: - - 0 # no bit delay - - 50 # 0.5-clock-cycle delay - - 100 # 1-clock-cycle delay - - 150 # 1.5-clock-cycle delay - - 200 # 2-clock-cycle delay + $ref: /schemas/types.yaml#/definitions/uint32 + enum: + - 0 # no bit delay + - 50 # 0.5-clock-cycle delay + - 100 # 1-clock-cycle delay + - 150 # 1.5-clock-cycle delay + - 200 # 2-clock-cycle delay renesas,syncdl: description: delay sync signal (hold) in transmit mode - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: - - 0 # no bit delay - - 50 # 0.5-clock-cycle delay - - 100 # 1-clock-cycle delay - - 150 # 1.5-clock-cycle delay - - 200 # 2-clock-cycle delay - - 300 # 3-clock-cycle delay + $ref: /schemas/types.yaml#/definitions/uint32 + enum: + - 0 # no bit delay + - 50 # 0.5-clock-cycle delay + - 100 # 1-clock-cycle delay + - 150 # 1.5-clock-cycle delay + - 200 # 2-clock-cycle delay + - 300 # 3-clock-cycle delay renesas,tx-fifo-size: # deprecated for soctype-specific bindings description: | Override the default TX fifo size. Unit is words. Ignored if 0. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - maxItems: 1 + $ref: /schemas/types.yaml#/definitions/uint32 + maxItems: 1 default: 64 renesas,rx-fifo-size: # deprecated for soctype-specific bindings description: | Override the default RX fifo size. Unit is words. Ignored if 0. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - maxItems: 1 + $ref: /schemas/types.yaml#/definitions/uint32 + maxItems: 1 default: 64 required: diff --git a/Documentation/devicetree/bindings/spi/spi-controller.yaml b/Documentation/devicetree/bindings/spi/spi-controller.yaml index d8e5509a7081..c6a2f543648b 100644 --- a/Documentation/devicetree/bindings/spi/spi-controller.yaml +++ b/Documentation/devicetree/bindings/spi/spi-controller.yaml @@ -115,24 +115,22 @@ patternProperties: Maximum SPI clocking speed of the device in Hz. spi-rx-bus-width: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [ 1, 2, 4, 8 ] - - default: 1 description: Bus width to the SPI bus used for read transfers. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [1, 2, 4, 8] + default: 1 spi-rx-delay-us: description: Delay, in microseconds, after a read transfer. spi-tx-bus-width: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [ 1, 2, 4, 8 ] - - default: 1 description: Bus width to the SPI bus used for write transfers. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [1, 2, 4, 8] + default: 1 spi-tx-delay-us: description: diff --git a/Documentation/devicetree/bindings/spi/spi-pl022.yaml b/Documentation/devicetree/bindings/spi/spi-pl022.yaml index 22ba4e90655b..22999024477f 100644 --- a/Documentation/devicetree/bindings/spi/spi-pl022.yaml +++ b/Documentation/devicetree/bindings/spi/spi-pl022.yaml @@ -80,55 +80,48 @@ patternProperties: properties: pl022,interface: description: SPI interface type - allOf: - - $ref: "/schemas/types.yaml#/definitions/uint32" - - enum: - - 0 # SPI - - 1 # Texas Instruments Synchronous Serial Frame Format - - 2 # Microwire (Half Duplex) + $ref: "/schemas/types.yaml#/definitions/uint32" + enum: + - 0 # SPI + - 1 # Texas Instruments Synchronous Serial Frame Format + - 2 # Microwire (Half Duplex) pl022,com-mode: description: Specifies the transfer mode - allOf: - - $ref: "/schemas/types.yaml#/definitions/uint32" - - enum: - - 0 # interrupt mode - - 1 # polling mode - - 2 # DMA mode - default: 1 + $ref: "/schemas/types.yaml#/definitions/uint32" + enum: + - 0 # interrupt mode + - 1 # polling mode + - 2 # DMA mode + default: 1 pl022,rx-level-trig: description: Rx FIFO watermark level - allOf: - - $ref: "/schemas/types.yaml#/definitions/uint32" - - minimum: 0 - maximum: 4 + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0 + maximum: 4 pl022,tx-level-trig: description: Tx FIFO watermark level - allOf: - - $ref: "/schemas/types.yaml#/definitions/uint32" - - minimum: 0 - maximum: 4 + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0 + maximum: 4 pl022,ctrl-len: description: Microwire interface - Control length - allOf: - - $ref: "/schemas/types.yaml#/definitions/uint32" - - minimum: 0x03 - maximum: 0x1f + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0x03 + maximum: 0x1f pl022,wait-state: description: Microwire interface - Wait state - allOf: - - $ref: "/schemas/types.yaml#/definitions/uint32" - - enum: [ 0, 1 ] + $ref: "/schemas/types.yaml#/definitions/uint32" + enum: [0, 1] pl022,duplex: description: Microwire interface - Full/Half duplex - allOf: - - $ref: "/schemas/types.yaml#/definitions/uint32" - - enum: [ 0, 1 ] + $ref: "/schemas/types.yaml#/definitions/uint32" + enum: [0, 1] required: - compatible diff --git a/Documentation/devicetree/bindings/spi/spi-sifive.yaml b/Documentation/devicetree/bindings/spi/spi-sifive.yaml index 140e4351a19f..28040598bfae 100644 --- a/Documentation/devicetree/bindings/spi/spi-sifive.yaml +++ b/Documentation/devicetree/bindings/spi/spi-sifive.yaml @@ -50,18 +50,16 @@ properties: sifive,fifo-depth: description: Depth of hardware queues; defaults to 8 - allOf: - - $ref: "/schemas/types.yaml#/definitions/uint32" - - enum: [ 8 ] - - default: 8 + $ref: "/schemas/types.yaml#/definitions/uint32" + enum: [8] + default: 8 sifive,max-bits-per-word: description: Maximum bits per word; defaults to 8 - allOf: - - $ref: "/schemas/types.yaml#/definitions/uint32" - - enum: [ 0, 1, 2, 3, 4, 5, 6, 7, 8 ] - - default: 8 + $ref: "/schemas/types.yaml#/definitions/uint32" + enum: [0, 1, 2, 3, 4, 5, 6, 7, 8] + default: 8 required: - compatible diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml index 2ddd39d96766..d7be931b42d2 100644 --- a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml +++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml @@ -73,12 +73,11 @@ properties: - const: calib_sel "#qcom,sensors": - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - minimum: 1 - - maximum: 16 description: Number of sensors enabled on this platform + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 + maximum: 16 "#thermal-sensor-cells": const: 1 diff --git a/Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml b/Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml index 6ff718ede184..d83a1f97f911 100644 --- a/Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml +++ b/Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml @@ -65,10 +65,9 @@ patternProperties: description: A timer node has up to 8 frame sub-nodes, each with the following properties. properties: frame-number: - allOf: - - $ref: "/schemas/types.yaml#/definitions/uint32" - - minimum: 0 - maximum: 7 + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0 + maximum: 7 interrupts: minItems: 1 diff --git a/Documentation/devicetree/bindings/timer/ingenic,tcu.yaml b/Documentation/devicetree/bindings/timer/ingenic,tcu.yaml index e21e9972ed65..03893e6a2f57 100644 --- a/Documentation/devicetree/bindings/timer/ingenic,tcu.yaml +++ b/Documentation/devicetree/bindings/timer/ingenic,tcu.yaml @@ -100,16 +100,15 @@ properties: ingenic,pwm-channels-mask: description: Bitmask of TCU channels reserved for PWM use. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - minimum: 0x00 - - maximum: 0xff - - default: 0xfc + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0x00 + maximum: 0xff + default: 0xfc patternProperties: "^watchdog@[a-f0-9]+$": type: object - allOf: [ $ref: ../watchdog/watchdog.yaml# ] + $ref: ../watchdog/watchdog.yaml# properties: compatible: oneOf: @@ -137,7 +136,7 @@ patternProperties: "^pwm@[a-f0-9]+$": type: object - allOf: [ $ref: ../pwm/pwm.yaml# ] + $ref: ../pwm/pwm.yaml# properties: compatible: oneOf: diff --git a/Documentation/devicetree/bindings/usb/aspeed,usb-vhub.yaml b/Documentation/devicetree/bindings/usb/aspeed,usb-vhub.yaml index 06399ba0d9e4..297fb77a5454 100644 --- a/Documentation/devicetree/bindings/usb/aspeed,usb-vhub.yaml +++ b/Documentation/devicetree/bindings/usb/aspeed,usb-vhub.yaml @@ -38,19 +38,17 @@ properties: aspeed,vhub-downstream-ports: description: Number of downstream ports supported by the Virtual Hub - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - default: 5 - minimum: 1 - maximum: 7 + $ref: /schemas/types.yaml#/definitions/uint32 + default: 5 + minimum: 1 + maximum: 7 aspeed,vhub-generic-endpoints: description: Number of generic endpoints supported by the Virtual Hub - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - default: 15 - minimum: 1 - maximum: 21 + $ref: /schemas/types.yaml#/definitions/uint32 + default: 15 + minimum: 1 + maximum: 21 required: - compatible -- cgit v1.2.3