From 691962d1593a16d5c8c9a5bb60b586ac3e54acc8 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Thu, 13 Jun 2013 17:59:57 +0300 Subject: usb: chipidea: introduce dual role mode pdata flags Even if a chipidea core is otg capable the board may not be. This allows to explicitly set the core to host/peripheral mode. Without these flags the driver falls back to the old behaviour. Signed-off-by: Sascha Hauer Signed-off-by: Alexander Shishkin Signed-off-by: Greg Kroah-Hartman --- Documentation/devicetree/bindings/usb/ci13xxx-imx.txt | 1 + 1 file changed, 1 insertion(+) (limited to 'Documentation/devicetree/bindings/usb') diff --git a/Documentation/devicetree/bindings/usb/ci13xxx-imx.txt b/Documentation/devicetree/bindings/usb/ci13xxx-imx.txt index 184a8e0f26dc..b4b5b7906c88 100644 --- a/Documentation/devicetree/bindings/usb/ci13xxx-imx.txt +++ b/Documentation/devicetree/bindings/usb/ci13xxx-imx.txt @@ -9,6 +9,7 @@ Recommended properies: - phy_type: the type of the phy connected to the core. Should be one of "utmi", "utmi_wide", "ulpi", "serial" or "hsic". Without this property the PORTSC register won't be touched +- dr_mode: One of "host", "peripheral" or "otg". Defaults to "otg" Optional properties: - fsl,usbphy: phandler of usb phy that connects to the only one port -- cgit v1.2.3